; generated by PrusaSlicer 2.4.1+win64 on 2022-04-02 at 17:09:50 UTC

; 

; external perimeters extrusion width = 0.65mm
; perimeters extrusion width = 0.65mm
; infill extrusion width = 0.65mm
; solid infill extrusion width = 0.65mm
; top infill extrusion width = 0.60mm
; first layer extrusion width = 0.65mm

M73 P0 R4
M73 Q0 S4
M201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2
M203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm / sec
M204 P1250 R1250 T1250 ; sets acceleration (P, T) and retract acceleration (R), mm/sec^2
M205 X8.00 Y8.00 Z0.40 E4.50 ; sets the jerk limits, mm/sec
M205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec
M107
;TYPE:Custom
M862.3 P "MK3S" ; printer model check
M862.1 P0.6 ; nozzle diameter check
M115 U3.10.1 ; tell printer latest fw version
G90 ; use absolute coordinates
M83 ; extruder relative mode
M104 S215 ; set extruder temp
M140 S60 ; set bed temp
M190 S60 ; wait for bed temp
M109 S215 ; wait for extruder temp
G28 W ; home all without mesh bed level
G80 ; mesh bed leveling
G1 Z0.2 F720
G1 Y-3 F1000 ; go outside print area
G92 E0
G1 X60 E9 F1000 ; intro line
G1 X100 E12.5 F1000 ; intro line
G92 E0
M221 S95
G21 ; set units to millimeters
G90 ; use absolute coordinates
M83 ; use relative distances for extrusion
M900 K0.04 ; Filament gcode LA 1.5
M900 K18 ; Filament gcode LA 1.0
M107
;LAYER_CHANGE
;Z:0.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;0.2


M73 P1 R4
M73 Q1 S4
G1 E-1 F2100
M73 P2 R4
M73 Q2 S4
G1 Z.4 F720
;AFTER_LAYER_CHANGE
;0.2
; printing object first layer.stl id:0 copy 0
G1 X88.372 Y10.797 F10800
G1 Z.2 F720
G1 E1 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.65
G1 F1200
G1 X107.322 Y10.797 E.95179
G1 X107.322 Y15.776 E.25006
G1 X109.372 Y15.776 E.10296
G1 X109.372 Y10.797 E.25006
G1 X128.322 Y10.797 E.95179
G1 X128.322 Y15.776 E.25006
M73 P3 R4
M73 Q3 S4
G1 X130.372 Y15.776 E.10296
G1 X130.372 Y10.797 E.25006
G1 X149.322 Y10.797 E.95179
G1 X149.322 Y15.776 E.25006
G1 X151.372 Y15.776 E.10296
G1 X151.372 Y10.797 E.25006
G1 X170.322 Y10.797 E.95179
G1 X170.322 Y49.747 E1.95632
M73 P4 R4
M73 Q4 S4
G1 X151.372 Y49.747 E.95179
M73 P5 R4
M73 Q5 S4
G1 X151.372 Y44.386 E.26925
G1 X149.322 Y44.386 E.10296
G1 X149.322 Y49.747 E.26925
G1 X130.372 Y49.747 E.95179
G1 X130.372 Y44.386 E.26925
G1 X128.322 Y44.386 E.10296
M73 P6 R4
M73 Q6 S4
G1 X128.322 Y49.747 E.26925
G1 X109.372 Y49.747 E.95179
G1 X109.372 Y44.386 E.26925
G1 X107.322 Y44.386 E.10296
G1 X107.322 Y49.747 E.26925
G1 X88.372 Y49.747 E.95179
G1 X88.372 Y10.887 E1.9518
M204 S1000
;WIPE_START
M73 P7 R4
M73 Q7 S4
G1 F8640
G1 X92.486 Y10.867 E-.95
;WIPE_END
G1 E-.05 F2100
G1 Z.6 F720
G1 X88.828 Y49.565 F10800
G1 Z.2 F720
G1 E1 F2100
M204 S800
;TYPE:Solid infill
;WIDTH:0.652222
G1 F1200
M73 Q8 S4
G1 X88.828 Y11.252 E1.93135
G1 X89.438 Y11.252 E.03072
M73 P8 R4
G1 X89.438 Y49.292 E1.91758
G1 X90.047 Y49.292 E.03072
M73 P9 R4
M73 Q9 S4
G1 X90.047 Y11.252 E1.91758
G1 X90.656 Y11.252 E.03072
M73 P10 R4
M73 Q10 S4
G1 X90.656 Y49.292 E1.91758
G1 X91.265 Y49.292 E.03072
G1 X91.265 Y11.252 E1.91758
G1 X91.875 Y11.252 E.03072
M73 P11 R4
M73 Q11 S4
G1 X91.875 Y49.292 E1.91758
G1 X92.484 Y49.292 E.03072
M73 P12 R4
M73 Q12 S4
G1 X92.484 Y11.252 E1.91758
G1 X93.093 Y11.252 E.03072
G1 X93.093 Y49.292 E1.91758
G1 X93.703 Y49.292 E.03072
M73 P13 R4
M73 Q13 S4
G1 X93.703 Y11.252 E1.91758
G1 X94.312 Y11.252 E.03072
M73 P14 R4
M73 Q14 S4
G1 X94.312 Y49.292 E1.91758
G1 X94.921 Y49.292 E.03072
G1 X94.921 Y11.252 E1.91758
G1 X95.531 Y11.252 E.03072
M73 P15 R4
M73 Q15 S4
G1 X95.531 Y49.292 E1.91758
G1 X96.14 Y49.292 E.03072
M73 P16 R4
M73 Q16 S4
G1 X96.14 Y11.252 E1.91758
G1 X96.749 Y11.252 E.03072
M73 P16 R3
M73 Q16 S3
G1 X96.749 Y49.292 E1.91758
G1 X97.358 Y49.292 E.03072
M73 P17 R3
M73 Q17 S3
G1 X97.359 Y11.252 E1.91758
G1 X97.968 Y11.252 E.03072
M73 P18 R3
M73 Q18 S3
G1 X97.968 Y49.292 E1.91758
G1 X98.577 Y49.292 E.03072
G1 X98.577 Y11.252 E1.91758
G1 X99.186 Y11.252 E.03072
M73 P19 R3
M73 Q19 S3
G1 X99.186 Y49.292 E1.91758
G1 X99.796 Y49.292 E.03072
M73 P20 R3
M73 Q20 S3
G1 X99.796 Y11.252 E1.91758
G1 X100.405 Y11.252 E.03072
G1 X100.405 Y49.292 E1.91758
G1 X101.014 Y49.292 E.03072
M73 P21 R3
M73 Q21 S3
G1 X101.014 Y11.252 E1.91758
G1 X101.624 Y11.252 E.03072
M73 P22 R3
M73 Q22 S3
G1 X101.624 Y49.292 E1.91758
G1 X102.233 Y49.292 E.03072
M73 Q23 S3
G1 X102.233 Y11.252 E1.91758
G1 X102.842 Y11.252 E.03072
M73 P23 R3
G1 X102.842 Y49.292 E1.91758
G1 X103.452 Y49.292 E.03072
M73 P24 R3
M73 Q24 S3
G1 X103.452 Y11.252 E1.91758
G1 X104.061 Y11.252 E.03072
M73 P25 R3
M73 Q25 S3
G1 X104.061 Y49.292 E1.91758
G1 X104.67 Y49.292 E.03072
G1 X104.67 Y11.252 E1.91758
G1 X105.279 Y11.252 E.03072
M73 P26 R3
M73 Q26 S3
G1 X105.279 Y49.292 E1.91758
G1 X105.889 Y49.292 E.03072
M73 P27 R3
M73 Q27 S3
G1 X105.889 Y11.252 E1.91758
G1 X106.498 Y11.252 E.03072
G1 X106.498 Y49.292 E1.91758
G1 X106.867 Y49.292 E.01858
M73 P28 R3
M73 Q28 S3
G1 X106.867 Y43.931 E.27024
G1 X107.107 Y43.931 E.01214
G1 X107.107 Y16.231 E1.39637
G1 X107.717 Y16.231 E.03072
M73 P29 R3
M73 Q29 S3
G1 X107.717 Y43.931 E1.39637
G1 X108.326 Y43.931 E.03072
G1 X108.326 Y16.231 E1.39637
G1 X108.935 Y16.231 E.03072
M73 P30 R3
M73 Q30 S3
G1 X108.935 Y43.931 E1.39637
G1 X109.545 Y43.931 E.03072
G1 X109.545 Y16.231 E1.39637
G1 X109.827 Y16.231 E.01424
M73 P31 R3
M73 Q31 S3
G1 X109.827 Y11.252 E.25097
G1 X110.154 Y11.252 E.01647
G1 X110.154 Y49.292 E1.91758
G1 X110.763 Y49.292 E.03072
G1 X110.763 Y11.252 E1.91758
G1 X111.372 Y11.252 E.03072
M73 P32 R3
M73 Q32 S3
G1 X111.372 Y49.292 E1.91758
G1 X111.982 Y49.292 E.03072
M73 P33 R3
M73 Q33 S3
G1 X111.982 Y11.252 E1.91758
G1 X112.591 Y11.252 E.03072
G1 X112.591 Y49.292 E1.91758
G1 X113.2 Y49.292 E.03072
M73 P34 R3
M73 Q34 S3
G1 X113.2 Y11.252 E1.91758
G1 X113.81 Y11.252 E.03072
M73 P35 R3
M73 Q35 S3
G1 X113.81 Y49.292 E1.91758
G1 X114.419 Y49.292 E.03072
G1 X114.419 Y11.252 E1.91758
G1 X115.028 Y11.252 E.03072
M73 P36 R3
M73 Q36 S3
G1 X115.028 Y49.292 E1.91758
G1 X115.638 Y49.292 E.03072
M73 P37 R2
M73 Q37 S2
G1 X115.638 Y11.252 E1.91758
G1 X116.247 Y11.252 E.03072
G1 X116.247 Y49.292 E1.91758
M73 Q38 S2
G1 X116.856 Y49.292 E.03072
M73 P38 R2
G1 X116.856 Y11.252 E1.91758
G1 X117.465 Y11.252 E.03072
M73 P39 R2
M73 Q39 S2
G1 X117.465 Y49.292 E1.91758
G1 X118.075 Y49.292 E.03072
M73 P40 R2
M73 Q40 S2
G1 X118.075 Y11.252 E1.91758
G1 X118.684 Y11.252 E.03072
G1 X118.684 Y49.292 E1.91758
G1 X119.293 Y49.292 E.03072
M73 P41 R2
M73 Q41 S2
G1 X119.293 Y11.252 E1.91758
G1 X119.903 Y11.252 E.03072
M73 P42 R2
M73 Q42 S2
G1 X119.903 Y49.292 E1.91758
G1 X120.512 Y49.292 E.03072
G1 X120.512 Y11.252 E1.91758
G1 X121.121 Y11.252 E.03072
M73 P43 R2
M73 Q43 S2
G1 X121.121 Y49.292 E1.91758
G1 X121.731 Y49.292 E.03072
M73 P44 R2
M73 Q44 S2
G1 X121.731 Y11.252 E1.91758
G1 X122.34 Y11.252 E.03072
G1 X122.34 Y49.292 E1.91758
G1 X122.949 Y49.292 E.03072
M73 P45 R2
M73 Q45 S2
G1 X122.949 Y11.252 E1.91758
G1 X123.558 Y11.252 E.03072
M73 P46 R2
M73 Q46 S2
G1 X123.558 Y49.292 E1.91758
G1 X124.168 Y49.292 E.03072
G1 X124.168 Y11.252 E1.91758
G1 X124.777 Y11.252 E.03072
M73 P47 R2
M73 Q47 S2
G1 X124.777 Y49.292 E1.91758
G1 X125.386 Y49.292 E.03072
M73 P48 R2
M73 Q48 S2
G1 X125.386 Y11.252 E1.91758
G1 X125.996 Y11.252 E.03072
G1 X125.996 Y49.292 E1.91758
G1 X126.605 Y49.292 E.03072
M73 P49 R2
M73 Q49 S2
G1 X126.605 Y11.252 E1.91758
G1 X127.214 Y11.252 E.03072
M73 P50 R2
M73 Q50 S2
G1 X127.214 Y49.292 E1.91758
G1 X127.824 Y49.292 E.03072
G1 X127.824 Y11.252 E1.91758
G1 X127.867 Y11.252 E.00216
M73 P51 R2
M73 Q51 S2
G1 X127.867 Y16.231 E.25097
G1 X128.433 Y16.231 E.02855
G1 X128.433 Y43.931 E1.39637
G1 X129.042 Y43.931 E.03072
M73 P52 R2
M73 Q52 S2
G1 X129.042 Y16.231 E1.39637
G1 X129.652 Y16.231 E.03072
G1 X129.652 Y43.931 E1.39637
G1 X130.261 Y43.931 E.03072
M73 P53 R2
M73 Q53 S2
G1 X130.261 Y16.231 E1.39637
G1 X130.827 Y16.231 E.02855
G1 X130.827 Y11.252 E.25097
G1 X130.87 Y11.252 E.00217
G1 X130.87 Y49.292 E1.91758
G1 X131.479 Y49.292 E.03072
M73 P54 R2
M73 Q54 S2
G1 X131.479 Y11.252 E1.91758
G1 X132.089 Y11.252 E.03072
M73 P55 R2
M73 Q55 S2
G1 X132.089 Y49.292 E1.91758
G1 X132.698 Y49.292 E.03072
G1 X132.698 Y11.252 E1.91758
G1 X133.307 Y11.252 E.03072
M73 P56 R2
M73 Q56 S2
G1 X133.307 Y49.292 E1.91758
G1 X133.917 Y49.292 E.03072
M73 P57 R2
M73 Q57 S2
G1 X133.917 Y11.252 E1.91758
G1 X134.526 Y11.252 E.03072
G1 X134.526 Y49.292 E1.91758
G1 X135.135 Y49.292 E.03072
M73 P58 R1
M73 Q58 S1
G1 X135.135 Y11.252 E1.91758
G1 X135.745 Y11.252 E.03072
M73 P59 R1
M73 Q59 S1
G1 X135.745 Y49.292 E1.91758
G1 X136.354 Y49.292 E.03072
G1 X136.354 Y11.252 E1.91758
G1 X136.963 Y11.252 E.03072
M73 P60 R1
M73 Q60 S1
G1 X136.963 Y49.292 E1.91758
G1 X137.572 Y49.292 E.03072
M73 P61 R1
M73 Q61 S1
G1 X137.572 Y11.252 E1.91758
G1 X138.182 Y11.252 E.03072
M73 Q62 S1
G1 X138.182 Y49.292 E1.91758
M73 P62 R1
G1 X138.791 Y49.292 E.03072
G1 X138.791 Y11.252 E1.91758
G1 X139.4 Y11.252 E.03072
M73 P63 R1
M73 Q63 S1
G1 X139.4 Y49.292 E1.91758
G1 X140.01 Y49.292 E.03072
M73 P64 R1
M73 Q64 S1
G1 X140.01 Y11.252 E1.91758
G1 X140.619 Y11.252 E.03072
G1 X140.619 Y49.292 E1.91758
G1 X141.228 Y49.292 E.03072
M73 P65 R1
M73 Q65 S1
G1 X141.228 Y11.252 E1.91758
G1 X141.838 Y11.252 E.03072
M73 P66 R1
M73 Q66 S1
G1 X141.838 Y49.292 E1.91758
G1 X142.447 Y49.292 E.03072
G1 X142.447 Y11.252 E1.91758
G1 X143.056 Y11.252 E.03072
M73 P67 R1
M73 Q67 S1
G1 X143.056 Y49.292 E1.91758
G1 X143.665 Y49.292 E.03072
M73 P68 R1
M73 Q68 S1
G1 X143.665 Y11.252 E1.91758
G1 X144.275 Y11.252 E.03072
G1 X144.275 Y49.292 E1.91758
G1 X144.884 Y49.292 E.03072
M73 P69 R1
M73 Q69 S1
G1 X144.884 Y11.252 E1.91758
G1 X145.493 Y11.252 E.03072
M73 P70 R1
M73 Q70 S1
G1 X145.493 Y49.292 E1.91758
G1 X146.103 Y49.292 E.03072
G1 X146.103 Y11.252 E1.91758
G1 X146.712 Y11.252 E.03072
M73 P71 R1
M73 Q71 S1
G1 X146.712 Y49.292 E1.91758
G1 X147.321 Y49.292 E.03072
M73 P72 R1
M73 Q72 S1
G1 X147.321 Y11.252 E1.91758
G1 X147.931 Y11.252 E.03072
G1 X147.931 Y49.292 E1.91758
G1 X148.54 Y49.292 E.03072
M73 P73 R1
M73 Q73 S1
G1 X148.54 Y11.252 E1.91758
G1 X148.867 Y11.252 E.01647
M73 P74 R1
M73 Q74 S1
G1 X148.867 Y16.231 E.25097
G1 X149.149 Y16.231 E.01425
G1 X149.149 Y43.931 E1.39637
G1 X149.758 Y43.931 E.03072
G1 X149.758 Y16.231 E1.39637
G1 X150.368 Y16.231 E.03072
M73 P75 R1
M73 Q75 S1
G1 X150.368 Y43.931 E1.39637
G1 X150.977 Y43.931 E.03072
G1 X150.977 Y16.231 E1.39637
G1 X151.586 Y16.231 E.03072
M73 P76 R1
M73 Q76 S1
G1 X151.586 Y43.931 E1.39637
G1 X151.827 Y43.931 E.01214
G1 X151.827 Y49.292 E.27024
G1 X152.196 Y49.292 E.01858
G1 X152.196 Y11.252 E1.91758
G1 X152.805 Y11.252 E.03072
M73 P77 R1
M73 Q77 S1
G1 X152.805 Y49.292 E1.91758
G1 X153.414 Y49.292 E.03072
M73 P78 R1
M73 Q78 S1
G1 X153.414 Y11.252 E1.91758
G1 X154.024 Y11.252 E.03072
M73 P79 R1
M73 Q79 S1
G1 X154.024 Y49.292 E1.91758
G1 X154.633 Y49.292 E.03072
M73 P79 R0
M73 Q79 S0
G1 X154.633 Y11.252 E1.91758
G1 X155.242 Y11.252 E.03072
M73 P80 R0
M73 Q80 S0
G1 X155.242 Y49.292 E1.91758
G1 X155.851 Y49.292 E.03072
M73 P81 R0
M73 Q81 S0
G1 X155.851 Y11.252 E1.91758
G1 X156.461 Y11.252 E.03072
G1 X156.461 Y49.292 E1.91758
G1 X157.07 Y49.292 E.03072
M73 P82 R0
M73 Q82 S0
G1 X157.07 Y11.252 E1.91758
G1 X157.679 Y11.252 E.03072
M73 P83 R0
M73 Q83 S0
G1 X157.679 Y49.292 E1.91758
G1 X158.289 Y49.292 E.03072
G1 X158.289 Y11.252 E1.91758
G1 X158.898 Y11.252 E.03072
M73 P84 R0
M73 Q84 S0
G1 X158.898 Y49.292 E1.91758
G1 X159.507 Y49.292 E.03072
M73 P85 R0
M73 Q85 S0
G1 X159.507 Y11.252 E1.91758
G1 X160.117 Y11.252 E.03072
G1 X160.117 Y49.292 E1.91758
G1 X160.726 Y49.292 E.03072
M73 P86 R0
M73 Q86 S0
G1 X160.726 Y11.252 E1.91758
G1 X161.335 Y11.252 E.03072
M73 P87 R0
M73 Q87 S0
G1 X161.335 Y49.292 E1.91758
G1 X161.945 Y49.292 E.03072
G1 X161.945 Y11.252 E1.91758
G1 X162.554 Y11.252 E.03072
M73 P88 R0
M73 Q88 S0
G1 X162.554 Y49.292 E1.91758
G1 X163.163 Y49.292 E.03072
M73 P89 R0
M73 Q89 S0
G1 X163.163 Y11.252 E1.91758
G1 X163.772 Y11.252 E.03072
G1 X163.772 Y49.292 E1.91758
G1 X164.382 Y49.292 E.03072
M73 P90 R0
M73 Q90 S0
G1 X164.382 Y11.252 E1.91758
G1 X164.991 Y11.252 E.03072
M73 P91 R0
M73 Q91 S0
G1 X164.991 Y49.292 E1.91758
G1 X165.6 Y49.292 E.03072
G1 X165.6 Y11.252 E1.91758
M73 Q92 S0
G1 X166.21 Y11.252 E.03072
M73 P92 R0
G1 X166.21 Y49.292 E1.91758
G1 X166.819 Y49.292 E.03072
M73 P93 R0
M73 Q93 S0
G1 X166.819 Y11.252 E1.91758
G1 X167.428 Y11.252 E.03072
M73 P94 R0
M73 Q94 S0
G1 X167.428 Y49.292 E1.91758
G1 X168.038 Y49.292 E.03072
G1 X168.038 Y11.252 E1.91758
G1 X168.647 Y11.252 E.03072
M73 P95 R0
M73 Q95 S0
G1 X168.647 Y49.292 E1.91758
G1 X169.256 Y49.292 E.03072
M73 P96 R0
M73 Q96 S0
G1 X169.256 Y11.252 E1.91758
G1 X169.865 Y11.252 E.03072
G1 X169.865 Y49.565 E1.93135
M204 S1000
; stop printing object first layer.stl id:0 copy 0
;WIPE_START
G1 F8640;_WIPE
M73 P97 R0
M73 Q97 S0
G1 X169.865 Y45.451 E-.95
;WIPE_END
G1 E-.05 F2100
G1 Z.6 F720
M107
;TYPE:Custom
; Filament-specific end gcode
G4 ; wait
M221 S100 ; reset flow
M900 K0 ; reset LA

M104 S0 ; turn off temperature
M140 S0 ; turn off heatbed
M107 ; turn off fan
G1 Z30.2 ; Move print head up
G1 X0 Y200 F3000 ; home X axis
M84 ; disable motors
M73 P100 R0
M73 Q100 S0
; filament used [mm] = 270.57
; filament used [cm3] = 0.65
; filament used [g] = 0.81
; filament cost = 0.01
; total filament used [g] = 0.81
; total filament cost = 0.01
; estimated printing time (normal mode) = 4m 45s
; estimated printing time (silent mode) = 4m 45s

; prusaslicer_config = begin
; avoid_crossing_perimeters = 0
; avoid_crossing_perimeters_max_detour = 0
; bed_custom_model = 
; bed_custom_texture = 
; bed_shape = 0x0,250x0,250x210,0x210
; bed_temperature = 60
; before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
; between_objects_gcode = 
; bottom_fill_pattern = monotonic
; bottom_solid_layers = 1
; bottom_solid_min_thickness = 0
; bridge_acceleration = 1000
; bridge_angle = 0
; bridge_fan_speed = 100
; bridge_flow_ratio = 1
; bridge_speed = 25
; brim_separation = 0.1
; brim_type = outer_only
; brim_width = 0
; clip_multipart_objects = 1
; color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
; compatible_printers_condition_cummulative = "printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6";"nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)"
; complete_objects = 0
; cooling = 1
; cooling_tube_length = 5
; cooling_tube_retraction = 91.5
; default_acceleration = 1000
; default_filament_profile = "Prusament PLA"
; default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
; deretract_speed = 0
; disable_fan_first_layers = 1
; dont_support_bridges = 0
; draft_shield = disabled
; duplicate_distance = 6
; elefant_foot_compensation = 0.2
; end_filament_gcode = "; Filament-specific end gcode"
; end_gcode = G4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
; ensure_vertical_shell_thickness = 1
; external_perimeter_extrusion_width = 0.65
; external_perimeter_speed = 35
; external_perimeters_first = 0
; extra_loading_move = -2
; extra_perimeters = 0
; extruder_clearance_height = 20
; extruder_clearance_radius = 45
; extruder_colour = ""
; extruder_offset = 0x0
; extrusion_axis = E
; extrusion_multiplier = 0.995
; extrusion_width = 0.65
; fan_always_on = 1
; fan_below_layer_time = 100
; filament_colour = #808080
; filament_cooling_final_speed = 3.4
; filament_cooling_initial_speed = 2.2
; filament_cooling_moves = 4
; filament_cost = 11
; filament_density = 1.24
; filament_diameter = 1.75
; filament_load_time = 0
; filament_loading_speed = 28
; filament_loading_speed_start = 3
; filament_max_volumetric_speed = 15.5
; filament_minimal_purge_on_wipe_tower = 15
; filament_notes = ""
; filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
; filament_retract_length = 1
; filament_settings_id = GST3D
; filament_soluble = 0
; filament_spool_weight = 0
; filament_toolchange_delay = 0
; filament_type = PLA
; filament_unload_time = 0
; filament_unloading_speed = 90
; filament_unloading_speed_start = 100
; filament_vendor = Generic
; fill_angle = 270
; fill_density = 0%
; fill_pattern = gyroid
; first_layer_acceleration = 800
; first_layer_acceleration_over_raft = 0
; first_layer_bed_temperature = 60
; first_layer_extrusion_width = 0.65
; first_layer_height = 0.2
; first_layer_speed = 20
; first_layer_speed_over_raft = 30
; first_layer_temperature = 215
; full_fan_speed_layer = 3
; fuzzy_skin = none
; fuzzy_skin_point_dist = 0.8
; fuzzy_skin_thickness = 0.3
; gap_fill_enabled = 1
; gap_fill_speed = 40
; gcode_comments = 0
; gcode_flavor = marlin
; gcode_label_objects = 1
; gcode_resolution = 0.0125
; gcode_substitutions = 
; high_current_on_filament_swap = 0
; host_type = octoprint
; infill_acceleration = 1000
; infill_anchor = 2.5
; infill_anchor_max = 15
; infill_every_layers = 1
; infill_extruder = 1
; infill_extrusion_width = 0.65
; infill_first = 0
; infill_only_where_needed = 0
; infill_overlap = 25%
; infill_speed = 70
; inherits_cummulative = ;"Generic PLA";
; interface_shells = 0
; ironing = 0
; ironing_flowrate = 15%
; ironing_spacing = 0.1
; ironing_speed = 15
; ironing_type = top
; layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
; layer_height = 0.15
; machine_limits_usage = emit_to_gcode
; machine_max_acceleration_e = 5000,5000
; machine_max_acceleration_extruding = 1250,1250
; machine_max_acceleration_retracting = 1250,1250
; machine_max_acceleration_travel = 1500,1250
; machine_max_acceleration_x = 1000,960
; machine_max_acceleration_y = 1000,960
; machine_max_acceleration_z = 200,200
; machine_max_feedrate_e = 120,120
; machine_max_feedrate_x = 200,100
; machine_max_feedrate_y = 200,100
; machine_max_feedrate_z = 12,12
; machine_max_jerk_e = 4.5,4.5
; machine_max_jerk_x = 8,8
; machine_max_jerk_y = 8,8
; machine_max_jerk_z = 0.4,0.4
; machine_min_extruding_rate = 0,0
; machine_min_travel_rate = 0,0
; max_fan_speed = 100
; max_layer_height = 0.4
; max_print_height = 210
; max_print_speed = 100
; max_volumetric_speed = 0
; min_fan_speed = 100
; min_layer_height = 0.15
; min_print_speed = 15
; min_skirt_length = 4
; mmu_segmented_region_max_width = 0
; notes = 
; nozzle_diameter = 0.6
; only_retract_when_crossing_perimeters = 0
; ooze_prevention = 0
; output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
; overhangs = 1
; parking_pos_retraction = 92
; pause_print_gcode = M601
; perimeter_acceleration = 800
; perimeter_extruder = 1
; perimeter_extrusion_width = 0.65
; perimeter_speed = 45
; perimeters = 1
; physical_printer_settings_id = 
; post_process = 
; print_settings_id = 0.15mm DETAIL @0.6 nozzle MK3
; printer_model = MK3S
; printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
; printer_settings_id = Original Prusa i3 MK3S & MK3S+ 0.6 nozzle
; printer_technology = FFF
; printer_variant = 0.6
; printer_vendor = 
; raft_contact_distance = 0.2
; raft_expansion = 1.5
; raft_first_layer_density = 90%
; raft_first_layer_expansion = 3
; raft_layers = 0
; remaining_times = 1
; resolution = 0
; retract_before_travel = 1
; retract_before_wipe = 0%
; retract_layer_change = 1
; retract_length = 0.8
; retract_length_toolchange = 4
; retract_lift = 0.4
; retract_lift_above = 0
; retract_lift_below = 209
; retract_restart_extra = 0
; retract_restart_extra_toolchange = 0
; retract_speed = 35
; seam_position = nearest
; silent_mode = 1
; single_extruder_multi_material = 0
; single_extruder_multi_material_priming = 0
; skirt_distance = 2
; skirt_height = 3
; skirts = 0
; slice_closing_radius = 0.049
; slicing_mode = regular
; slowdown_below_layer_time = 15
; small_perimeter_speed = 25
; solid_infill_below_area = 0
; solid_infill_every_layers = 0
; solid_infill_extruder = 1
; solid_infill_extrusion_width = 0.65
; solid_infill_speed = 70
; spiral_vase = 0
; standby_temperature_delta = -5
; start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
; start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}
; support_material = 0
; support_material_angle = 0
; support_material_auto = 1
; support_material_bottom_contact_distance = 0
; support_material_bottom_interface_layers = 0
; support_material_buildplate_only = 0
; support_material_closing_radius = 2
; support_material_contact_distance = 0.22
; support_material_enforce_layers = 0
; support_material_extruder = 0
; support_material_extrusion_width = 0.55
; support_material_interface_contact_loops = 0
; support_material_interface_extruder = 0
; support_material_interface_layers = 2
; support_material_interface_pattern = rectilinear
; support_material_interface_spacing = 0.3
; support_material_interface_speed = 80%
; support_material_pattern = rectilinear
; support_material_spacing = 2
; support_material_speed = 50
; support_material_style = grid
; support_material_synchronize_layers = 0
; support_material_threshold = 50
; support_material_with_sheath = 0
; support_material_xy_spacing = 80%
; temperature = 210
; template_custom_gcode = 
; thick_bridges = 0
; thin_walls = 0
; threads = 12
; thumbnails = 
; toolchange_gcode = 
; top_fill_pattern = monotonic
; top_infill_extrusion_width = 0.6
; top_solid_infill_speed = 45
; top_solid_layers = 0
; top_solid_min_thickness = 0.9
; travel_speed = 180
; travel_speed_z = 12
; use_firmware_retraction = 0
; use_relative_e_distances = 1
; use_volumetric_e = 0
; variable_layer_height = 1
; wipe = 1
; wipe_into_infill = 0
; wipe_into_objects = 0
; wipe_tower = 1
; wipe_tower_bridging = 10
; wipe_tower_brim_width = 2
; wipe_tower_no_sparse_layers = 0
; wipe_tower_rotation_angle = 0
; wipe_tower_width = 60
; wipe_tower_x = 170
; wipe_tower_y = 125
; wiping_volumes_extruders = 70,70
; wiping_volumes_matrix = 0
; xy_size_compensation = 0
; z_offset = 0
; prusaslicer_config = end