; generated by PrusaSlicer 2.4.1+win64 on 2022-04-02 at 17:10:44 UTC

; 

; external perimeters extrusion width = 0.45mm
; perimeters extrusion width = 0.45mm
; infill extrusion width = 0.45mm
; solid infill extrusion width = 0.45mm
; top infill extrusion width = 0.40mm
; first layer extrusion width = 0.42mm

M73 P0 R7
M73 Q0 S7
M201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2
M203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm / sec
M204 P1250 R1250 T1250 ; sets acceleration (P, T) and retract acceleration (R), mm/sec^2
M205 X8.00 Y8.00 Z0.40 E4.50 ; sets the jerk limits, mm/sec
M205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec
M107
;TYPE:Custom
M862.3 P "MK3S" ; printer model check
M862.1 P0.4 ; nozzle diameter check
M115 U3.10.1 ; tell printer latest fw version
G90 ; use absolute coordinates
M83 ; extruder relative mode
M104 S215 ; set extruder temp
M140 S60 ; set bed temp
M190 S60 ; wait for bed temp
M109 S215 ; wait for extruder temp
G28 W ; home all without mesh bed level
G80 ; mesh bed leveling
G1 Z0.2 F720
G1 Y-3 F1000 ; go outside print area
G92 E0
G1 X60 E9 F1000 ; intro line
G1 X100 E12.5 F1000 ; intro line
G92 E0
M221 S95

; Don't change E values below. Excessive value can damage the printer.
M907 E430 ; set extruder motor current
G21 ; set units to millimeters
G90 ; use absolute coordinates
M83 ; use relative distances for extrusion
M900 K0.05 ; Filament gcode LA 1.5
M900 K30 ; Filament gcode LA 1.0
M107
;LAYER_CHANGE
;Z:0.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;0.2


G1 E-1 F2100
M73 P1 R7
M73 Q1 S7
G1 Z.4 F720
;AFTER_LAYER_CHANGE
;0.2
; printing object first layer.stl id:0 copy 0
G1 X88.257 Y10.682 F10800
G1 Z.2 F720
G1 E1 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1200
G1 X107.437 Y10.682 E.59837
G1 X107.437 Y15.661 E.15532
G1 X109.257 Y15.661 E.05678
G1 X109.257 Y10.682 E.15532
G1 X128.437 Y10.682 E.59837
G1 X128.437 Y15.661 E.15532
M73 P2 R7
M73 Q2 S7
G1 X130.257 Y15.661 E.05678
G1 X130.257 Y10.682 E.15532
G1 X149.437 Y10.682 E.59837
G1 X149.437 Y15.661 E.15532
G1 X151.257 Y15.661 E.05678
G1 X151.257 Y10.682 E.15532
G1 X170.437 Y10.682 E.59837
G1 X170.437 Y49.862 E1.22232
G1 X151.257 Y49.862 E.59837
M73 P3 R7
M73 Q3 S7
G1 X151.257 Y44.501 E.16724
G1 X149.437 Y44.501 E.05678
G1 X149.437 Y49.862 E.16724
G1 X130.257 Y49.862 E.59837
G1 X130.257 Y44.501 E.16724
G1 X128.437 Y44.501 E.05678
G1 X128.437 Y49.862 E.16724
G1 X109.257 Y49.862 E.59837
G1 X109.257 Y44.501 E.16724
M73 P4 R7
M73 Q4 S7
G1 X107.437 Y44.501 E.05678
G1 X107.437 Y49.862 E.16724
G1 X88.257 Y49.862 E.59837
G1 X88.257 Y10.742 E1.22045
M204 S1000
;WIPE_START
G1 F8640
G1 X92.371 Y10.729 E-.95
;WIPE_END
G1 E-.05 F2100
G1 Z.6 F720
G1 X88.54 Y49.749 F10800
G1 Z.2 F720
M73 P5 R7
M73 Q5 S7
G1 E1 F2100
M204 S800
;TYPE:Solid infill
;WIDTH:0.42076
G1 F1200
G1 X88.54 Y10.965 E1.21241
G1 X88.918 Y10.965 E.01181
G1 X88.918 Y49.579 E1.2071
G1 X89.296 Y49.579 E.01181
G1 X89.296 Y10.965 E1.2071
G1 X89.674 Y10.965 E.01181
M73 P6 R7
M73 Q6 S7
G1 X89.674 Y49.579 E1.2071
G1 X90.051 Y49.579 E.01181
M73 P6 R6
M73 Q6 S6
G1 X90.051 Y10.965 E1.2071
G1 X90.429 Y10.965 E.01181
M73 P7 R6
M73 Q7 S6
G1 X90.429 Y49.579 E1.2071
G1 X90.807 Y49.579 E.01181
G1 X90.807 Y10.965 E1.2071
G1 X91.185 Y10.965 E.01181
M73 P8 R6
M73 Q8 S6
G1 X91.185 Y49.579 E1.2071
G1 X91.563 Y49.579 E.01181
G1 X91.563 Y10.965 E1.2071
G1 X91.941 Y10.965 E.01181
M73 P9 R6
M73 Q9 S6
G1 X91.941 Y49.579 E1.2071
G1 X92.318 Y49.579 E.01181
G1 X92.318 Y10.965 E1.2071
G1 X92.696 Y10.965 E.01181
G1 X92.696 Y49.579 E1.2071
G1 X93.074 Y49.579 E.01181
M73 P10 R6
M73 Q10 S6
G1 X93.074 Y10.965 E1.2071
G1 X93.452 Y10.965 E.01181
G1 X93.452 Y49.579 E1.2071
G1 X93.83 Y49.579 E.01181
M73 P11 R6
M73 Q11 S6
G1 X93.83 Y10.965 E1.2071
G1 X94.208 Y10.965 E.01181
G1 X94.208 Y49.579 E1.2071
G1 X94.585 Y49.579 E.01181
M73 P12 R6
M73 Q12 S6
G1 X94.585 Y10.965 E1.2071
G1 X94.963 Y10.965 E.01181
G1 X94.963 Y49.579 E1.2071
G1 X95.341 Y49.579 E.01181
G1 X95.341 Y10.965 E1.2071
G1 X95.719 Y10.965 E.01181
M73 P13 R6
M73 Q13 S6
G1 X95.719 Y49.579 E1.2071
G1 X96.097 Y49.579 E.01181
G1 X96.097 Y10.965 E1.2071
G1 X96.475 Y10.965 E.01181
M73 P14 R6
M73 Q14 S6
G1 X96.475 Y49.579 E1.2071
G1 X96.853 Y49.579 E.01181
G1 X96.853 Y10.965 E1.2071
G1 X97.23 Y10.965 E.01181
M73 P15 R6
M73 Q15 S6
G1 X97.23 Y49.579 E1.2071
G1 X97.608 Y49.579 E.01181
G1 X97.608 Y10.965 E1.2071
G1 X97.986 Y10.965 E.01181
M73 P16 R6
M73 Q16 S6
G1 X97.986 Y49.579 E1.2071
G1 X98.364 Y49.579 E.01181
G1 X98.364 Y10.965 E1.2071
G1 X98.742 Y10.965 E.01181
G1 X98.742 Y49.579 E1.2071
G1 X99.12 Y49.579 E.01181
M73 P17 R6
M73 Q17 S6
G1 X99.12 Y10.965 E1.2071
G1 X99.497 Y10.965 E.01181
G1 X99.497 Y49.579 E1.2071
G1 X99.875 Y49.579 E.01181
M73 P18 R6
M73 Q18 S6
G1 X99.875 Y10.965 E1.2071
G1 X100.253 Y10.965 E.01181
G1 X100.253 Y49.579 E1.2071
G1 X100.631 Y49.579 E.01181
M73 P19 R6
M73 Q19 S6
G1 X100.631 Y10.965 E1.2071
G1 X101.009 Y10.965 E.01181
G1 X101.009 Y49.579 E1.2071
G1 X101.387 Y49.579 E.01181
G1 X101.387 Y10.965 E1.2071
G1 X101.764 Y10.965 E.01181
M73 P20 R5
M73 Q20 S5
G1 X101.764 Y49.579 E1.2071
G1 X102.142 Y49.579 E.01181
G1 X102.142 Y10.965 E1.2071
G1 X102.52 Y10.965 E.01181
M73 P21 R5
M73 Q21 S5
G1 X102.52 Y49.579 E1.2071
G1 X102.898 Y49.579 E.01181
G1 X102.898 Y10.965 E1.2071
G1 X103.276 Y10.965 E.01181
M73 P22 R5
M73 Q22 S5
G1 X103.276 Y49.579 E1.2071
G1 X103.654 Y49.579 E.01181
G1 X103.654 Y10.965 E1.2071
G1 X104.031 Y10.965 E.01181
M73 P23 R5
M73 Q23 S5
G1 X104.031 Y49.579 E1.2071
G1 X104.409 Y49.579 E.01181
G1 X104.409 Y10.965 E1.2071
G1 X104.787 Y10.965 E.01181
G1 X104.787 Y49.579 E1.2071
G1 X105.165 Y49.579 E.01181
M73 P24 R5
M73 Q24 S5
G1 X105.165 Y10.965 E1.2071
G1 X105.543 Y10.965 E.01181
G1 X105.543 Y49.579 E1.2071
G1 X105.921 Y49.579 E.01181
M73 P25 R5
M73 Q25 S5
G1 X105.921 Y10.965 E1.2071
G1 X106.299 Y10.965 E.01181
G1 X106.299 Y49.579 E1.2071
G1 X106.676 Y49.579 E.01181
M73 P26 R5
M73 Q26 S5
G1 X106.676 Y10.965 E1.2071
G1 X107.054 Y10.965 E.01181
G1 X107.054 Y49.579 E1.2071
G1 X107.154 Y49.579 E.00312
G1 X107.154 Y44.218 E.16758
G1 X107.432 Y44.218 E.00869
M73 P27 R5
M73 Q27 S5
G1 X107.432 Y15.943 E.88389
G1 X107.81 Y15.943 E.01181
G1 X107.81 Y44.218 E.88389
G1 X108.188 Y44.218 E.01181
G1 X108.188 Y15.943 E.88389
G1 X108.566 Y15.943 E.01181
M73 P28 R5
M73 Q28 S5
G1 X108.566 Y44.218 E.88389
G1 X108.943 Y44.218 E.01181
G1 X108.943 Y15.943 E.88389
G1 X109.321 Y15.943 E.01181
G1 X109.321 Y44.218 E.88389
G1 X109.54 Y44.218 E.00683
G1 X109.54 Y49.579 E.16758
G1 X109.699 Y49.579 E.00499
M73 P29 R5
M73 Q29 S5
G1 X109.699 Y10.965 E1.2071
G1 X110.077 Y10.965 E.01181
G1 X110.077 Y49.579 E1.2071
G1 X110.455 Y49.579 E.01181
G1 X110.455 Y10.965 E1.2071
G1 X110.833 Y10.965 E.01181
M73 P30 R5
M73 Q30 S5
G1 X110.833 Y49.579 E1.2071
G1 X111.21 Y49.579 E.01181
G1 X111.21 Y10.965 E1.2071
G1 X111.588 Y10.965 E.01181
M73 P31 R5
M73 Q31 S5
G1 X111.588 Y49.579 E1.2071
G1 X111.966 Y49.579 E.01181
G1 X111.966 Y10.965 E1.2071
G1 X112.344 Y10.965 E.01181
M73 P32 R5
M73 Q32 S5
G1 X112.344 Y49.579 E1.2071
G1 X112.722 Y49.579 E.01181
G1 X112.722 Y10.965 E1.2071
G1 X113.1 Y10.965 E.01181
G1 X113.1 Y49.579 E1.2071
M73 Q33 S5
G1 X113.477 Y49.579 E.01181
M73 P33 R4
M73 Q33 S4
G1 X113.477 Y10.965 E1.2071
G1 X113.855 Y10.965 E.01181
G1 X113.855 Y49.579 E1.2071
G1 X114.233 Y49.579 E.01181
M73 P34 R4
M73 Q34 S4
G1 X114.233 Y10.965 E1.2071
G1 X114.611 Y10.965 E.01181
G1 X114.611 Y49.579 E1.2071
G1 X114.989 Y49.579 E.01181
M73 P35 R4
M73 Q35 S4
G1 X114.989 Y10.965 E1.2071
G1 X115.367 Y10.965 E.01181
G1 X115.367 Y49.579 E1.2071
G1 X115.745 Y49.579 E.01181
M73 P36 R4
M73 Q36 S4
G1 X115.745 Y10.965 E1.2071
G1 X116.122 Y10.965 E.01181
G1 X116.122 Y49.579 E1.2071
G1 X116.5 Y49.579 E.01181
G1 X116.5 Y10.965 E1.2071
G1 X116.878 Y10.965 E.01181
M73 P37 R4
M73 Q37 S4
G1 X116.878 Y49.579 E1.2071
G1 X117.256 Y49.579 E.01181
G1 X117.256 Y10.965 E1.2071
G1 X117.634 Y10.965 E.01181
M73 P38 R4
M73 Q38 S4
G1 X117.634 Y49.579 E1.2071
G1 X118.012 Y49.579 E.01181
G1 X118.012 Y10.965 E1.2071
G1 X118.389 Y10.965 E.01181
M73 P39 R4
M73 Q39 S4
G1 X118.389 Y49.579 E1.2071
G1 X118.767 Y49.579 E.01181
G1 X118.767 Y10.965 E1.2071
G1 X119.145 Y10.965 E.01181
G1 X119.145 Y49.579 E1.2071
M73 Q40 S4
G1 X119.523 Y49.579 E.01181
M73 P40 R4
G1 X119.523 Y10.965 E1.2071
G1 X119.901 Y10.965 E.01181
G1 X119.901 Y49.579 E1.2071
G1 X120.279 Y49.579 E.01181
M73 P41 R4
M73 Q41 S4
G1 X120.279 Y10.965 E1.2071
G1 X120.656 Y10.965 E.01181
G1 X120.656 Y49.579 E1.2071
G1 X121.034 Y49.579 E.01181
M73 P42 R4
M73 Q42 S4
G1 X121.034 Y10.965 E1.2071
G1 X121.412 Y10.965 E.01181
G1 X121.412 Y49.579 E1.2071
G1 X121.79 Y49.579 E.01181
M73 P43 R4
M73 Q43 S4
G1 X121.79 Y10.965 E1.2071
G1 X122.168 Y10.965 E.01181
G1 X122.168 Y49.579 E1.2071
G1 X122.546 Y49.579 E.01181
G1 X122.546 Y10.965 E1.2071
G1 X122.923 Y10.965 E.01181
M73 P44 R4
M73 Q44 S4
G1 X122.923 Y49.579 E1.2071
G1 X123.301 Y49.579 E.01181
G1 X123.301 Y10.965 E1.2071
G1 X123.679 Y10.965 E.01181
M73 P45 R4
M73 Q45 S4
G1 X123.679 Y49.579 E1.2071
G1 X124.057 Y49.579 E.01181
G1 X124.057 Y10.965 E1.2071
G1 X124.435 Y10.965 E.01181
M73 P46 R4
M73 Q46 S4
G1 X124.435 Y49.579 E1.2071
G1 X124.813 Y49.579 E.01181
G1 X124.813 Y10.965 E1.2071
G1 X125.191 Y10.965 E.01181
M73 P46 R3
M73 Q47 S3
G1 X125.191 Y49.579 E1.2071
G1 X125.568 Y49.579 E.01181
M73 P47 R3
G1 X125.568 Y10.965 E1.2071
G1 X125.946 Y10.965 E.01181
G1 X125.946 Y49.579 E1.2071
G1 X126.324 Y49.579 E.01181
M73 P48 R3
M73 Q48 S3
G1 X126.324 Y10.965 E1.2071
G1 X126.702 Y10.965 E.01181
G1 X126.702 Y49.579 E1.2071
G1 X127.08 Y49.579 E.01181
M73 P49 R3
M73 Q49 S3
G1 X127.08 Y10.965 E1.2071
G1 X127.458 Y10.965 E.01181
G1 X127.458 Y49.579 E1.2071
G1 X127.835 Y49.579 E.01181
M73 P50 R3
M73 Q50 S3
G1 X127.835 Y10.965 E1.2071
G1 X128.154 Y10.965 E.00996
G1 X128.154 Y15.943 E.15563
G1 X128.213 Y15.943 E.00185
G1 X128.213 Y44.218 E.88389
G1 X128.591 Y44.218 E.01181
G1 X128.591 Y15.943 E.88389
G1 X128.969 Y15.943 E.01181
M73 P51 R3
M73 Q51 S3
G1 X128.969 Y44.218 E.88389
G1 X129.347 Y44.218 E.01181
G1 X129.347 Y15.943 E.88389
G1 X129.725 Y15.943 E.01181
G1 X129.725 Y44.218 E.88389
G1 X130.102 Y44.218 E.01181
M73 P52 R3
M73 Q52 S3
G1 X130.102 Y15.943 E.88389
G1 X130.48 Y15.943 E.01181
G1 X130.48 Y44.218 E.88389
G1 X130.54 Y44.218 E.00185
G1 X130.54 Y49.579 E.16758
G1 X130.858 Y49.579 E.00996
G1 X130.858 Y10.965 E1.2071
G1 X131.236 Y10.965 E.01181
M73 P53 R3
M73 Q53 S3
G1 X131.236 Y49.579 E1.2071
G1 X131.614 Y49.579 E.01181
G1 X131.614 Y10.965 E1.2071
G1 X131.992 Y10.965 E.01181
M73 P54 R3
M73 Q54 S3
G1 X131.992 Y49.579 E1.2071
G1 X132.369 Y49.579 E.01181
G1 X132.369 Y10.965 E1.2071
G1 X132.747 Y10.965 E.01181
M73 P55 R3
M73 Q55 S3
G1 X132.747 Y49.579 E1.2071
G1 X133.125 Y49.579 E.01181
G1 X133.125 Y10.965 E1.2071
G1 X133.503 Y10.965 E.01181
G1 X133.503 Y49.579 E1.2071
G1 X133.881 Y49.579 E.01181
M73 P56 R3
M73 Q56 S3
G1 X133.881 Y10.965 E1.2071
G1 X134.259 Y10.965 E.01181
G1 X134.259 Y49.579 E1.2071
G1 X134.637 Y49.579 E.01181
M73 P57 R3
M73 Q57 S3
G1 X134.637 Y10.965 E1.2071
G1 X135.014 Y10.965 E.01181
G1 X135.014 Y49.579 E1.2071
G1 X135.392 Y49.579 E.01181
M73 P58 R3
M73 Q58 S3
G1 X135.392 Y10.965 E1.2071
G1 X135.77 Y10.965 E.01181
G1 X135.77 Y49.579 E1.2071
G1 X136.148 Y49.579 E.01181
M73 P59 R3
M73 Q59 S3
G1 X136.148 Y10.965 E1.2071
G1 X136.526 Y10.965 E.01181
G1 X136.526 Y49.579 E1.2071
G1 X136.904 Y49.579 E.01181
G1 X136.904 Y10.965 E1.2071
G1 X137.281 Y10.965 E.01181
M73 P60 R2
M73 Q60 S2
G1 X137.281 Y49.579 E1.2071
G1 X137.659 Y49.579 E.01181
G1 X137.659 Y10.965 E1.2071
G1 X138.037 Y10.965 E.01181
M73 P61 R2
M73 Q61 S2
G1 X138.037 Y49.579 E1.2071
G1 X138.415 Y49.579 E.01181
G1 X138.415 Y10.965 E1.2071
G1 X138.793 Y10.965 E.01181
M73 P62 R2
M73 Q62 S2
G1 X138.793 Y49.579 E1.2071
G1 X139.171 Y49.579 E.01181
G1 X139.171 Y10.965 E1.2071
G1 X139.548 Y10.965 E.01181
G1 X139.548 Y49.579 E1.2071
G1 X139.926 Y49.579 E.01181
M73 P63 R2
M73 Q63 S2
G1 X139.926 Y10.965 E1.2071
G1 X140.304 Y10.965 E.01181
G1 X140.304 Y49.579 E1.2071
G1 X140.682 Y49.579 E.01181
M73 P64 R2
M73 Q64 S2
G1 X140.682 Y10.965 E1.2071
G1 X141.06 Y10.965 E.01181
G1 X141.06 Y49.579 E1.2071
G1 X141.438 Y49.579 E.01181
M73 P65 R2
M73 Q65 S2
G1 X141.438 Y10.965 E1.2071
G1 X141.815 Y10.965 E.01181
G1 X141.815 Y49.579 E1.2071
G1 X142.193 Y49.579 E.01181
M73 P66 R2
M73 Q66 S2
G1 X142.193 Y10.965 E1.2071
G1 X142.571 Y10.965 E.01181
G1 X142.571 Y49.579 E1.2071
G1 X142.949 Y49.579 E.01181
G1 X142.949 Y10.965 E1.2071
G1 X143.327 Y10.965 E.01181
M73 P67 R2
M73 Q67 S2
G1 X143.327 Y49.579 E1.2071
G1 X143.705 Y49.579 E.01181
G1 X143.705 Y10.965 E1.2071
G1 X144.083 Y10.965 E.01181
M73 P68 R2
M73 Q68 S2
G1 X144.083 Y49.579 E1.2071
G1 X144.46 Y49.579 E.01181
G1 X144.46 Y10.965 E1.2071
G1 X144.838 Y10.965 E.01181
M73 P69 R2
M73 Q69 S2
G1 X144.838 Y49.579 E1.2071
G1 X145.216 Y49.579 E.01181
G1 X145.216 Y10.965 E1.2071
G1 X145.594 Y10.965 E.01181
G1 X145.594 Y49.579 E1.2071
G1 X145.972 Y49.579 E.01181
M73 P70 R2
M73 Q70 S2
G1 X145.972 Y10.965 E1.2071
G1 X146.35 Y10.965 E.01181
G1 X146.35 Y49.579 E1.2071
G1 X146.727 Y49.579 E.01181
M73 P71 R2
M73 Q71 S2
G1 X146.727 Y10.965 E1.2071
G1 X147.105 Y10.965 E.01181
G1 X147.105 Y49.579 E1.2071
G1 X147.483 Y49.579 E.01181
M73 P72 R2
M73 Q72 S2
G1 X147.483 Y10.965 E1.2071
G1 X147.861 Y10.965 E.01181
G1 X147.861 Y49.579 E1.2071
G1 X148.239 Y49.579 E.01181
M73 P73 R2
M73 Q73 S2
G1 X148.239 Y10.965 E1.2071
G1 X148.617 Y10.965 E.01181
M73 P73 R1
M73 Q73 S1
G1 X148.617 Y49.579 E1.2071
G1 X148.994 Y49.579 E.01181
G1 X148.994 Y10.965 E1.2071
G1 X149.154 Y10.965 E.00499
M73 P74 R1
M73 Q74 S1
G1 X149.154 Y15.943 E.15563
G1 X149.372 Y15.943 E.00682
G1 X149.372 Y44.218 E.88389
G1 X149.75 Y44.218 E.01181
G1 X149.75 Y15.943 E.88389
G1 X150.128 Y15.943 E.01181
M73 P75 R1
M73 Q75 S1
G1 X150.128 Y44.218 E.88389
G1 X150.506 Y44.218 E.01181
G1 X150.506 Y15.943 E.88389
G1 X150.884 Y15.943 E.01181
G1 X150.884 Y44.218 E.88389
G1 X151.261 Y44.218 E.01181
M73 P76 R1
M73 Q76 S1
G1 X151.261 Y15.943 E.88389
G1 X151.54 Y15.943 E.00869
G1 X151.54 Y10.965 E.15563
G1 X151.639 Y10.965 E.00312
G1 X151.639 Y49.579 E1.2071
G1 X152.017 Y49.579 E.01181
G1 X152.017 Y10.965 E1.2071
G1 X152.395 Y10.965 E.01181
M73 P77 R1
M73 Q77 S1
G1 X152.395 Y49.579 E1.2071
G1 X152.773 Y49.579 E.01181
G1 X152.773 Y10.965 E1.2071
G1 X153.151 Y10.965 E.01181
M73 P78 R1
M73 Q78 S1
G1 X153.151 Y49.579 E1.2071
G1 X153.529 Y49.579 E.01181
G1 X153.529 Y10.965 E1.2071
G1 X153.906 Y10.965 E.01181
M73 P79 R1
M73 Q79 S1
G1 X153.906 Y49.579 E1.2071
G1 X154.284 Y49.579 E.01181
G1 X154.284 Y10.965 E1.2071
G1 X154.662 Y10.965 E.01181
G1 X154.662 Y49.579 E1.2071
G1 X155.04 Y49.579 E.01181
M73 P80 R1
M73 Q80 S1
G1 X155.04 Y10.965 E1.2071
G1 X155.418 Y10.965 E.01181
G1 X155.418 Y49.579 E1.2071
G1 X155.796 Y49.579 E.01181
M73 P81 R1
M73 Q81 S1
G1 X155.796 Y10.965 E1.2071
G1 X156.173 Y10.965 E.01181
G1 X156.173 Y49.579 E1.2071
G1 X156.551 Y49.579 E.01181
M73 P82 R1
M73 Q82 S1
G1 X156.551 Y10.965 E1.2071
G1 X156.929 Y10.965 E.01181
G1 X156.929 Y49.579 E1.2071
G1 X157.307 Y49.579 E.01181
G1 X157.307 Y10.965 E1.2071
G1 X157.685 Y10.965 E.01181
M73 P83 R1
M73 Q83 S1
G1 X157.685 Y49.579 E1.2071
G1 X158.063 Y49.579 E.01181
G1 X158.063 Y10.965 E1.2071
G1 X158.44 Y10.965 E.01181
M73 P84 R1
M73 Q84 S1
G1 X158.44 Y49.579 E1.2071
G1 X158.818 Y49.579 E.01181
G1 X158.818 Y10.965 E1.2071
G1 X159.196 Y10.965 E.01181
M73 P85 R1
M73 Q85 S1
G1 X159.196 Y49.579 E1.2071
G1 X159.574 Y49.579 E.01181
G1 X159.574 Y10.965 E1.2071
G1 X159.952 Y10.965 E.01181
M73 P86 R1
M73 Q86 S1
G1 X159.952 Y49.579 E1.2071
G1 X160.33 Y49.579 E.01181
G1 X160.33 Y10.965 E1.2071
G1 X160.707 Y10.965 E.01181
M73 P86 R0
M73 Q86 S0
G1 X160.707 Y49.579 E1.2071
G1 X161.085 Y49.579 E.01181
M73 P87 R0
M73 Q87 S0
G1 X161.085 Y10.965 E1.2071
G1 X161.463 Y10.965 E.01181
G1 X161.463 Y49.579 E1.2071
G1 X161.841 Y49.579 E.01181
M73 P88 R0
M73 Q88 S0
G1 X161.841 Y10.965 E1.2071
G1 X162.219 Y10.965 E.01181
G1 X162.219 Y49.579 E1.2071
G1 X162.597 Y49.579 E.01181
M73 P89 R0
M73 Q89 S0
G1 X162.597 Y10.965 E1.2071
G1 X162.975 Y10.965 E.01181
G1 X162.975 Y49.579 E1.2071
G1 X163.352 Y49.579 E.01181
G1 X163.352 Y10.965 E1.2071
G1 X163.73 Y10.965 E.01181
M73 P90 R0
M73 Q90 S0
G1 X163.73 Y49.579 E1.2071
G1 X164.108 Y49.579 E.01181
G1 X164.108 Y10.965 E1.2071
G1 X164.486 Y10.965 E.01181
M73 P91 R0
M73 Q91 S0
G1 X164.486 Y49.579 E1.2071
G1 X164.864 Y49.579 E.01181
G1 X164.864 Y10.965 E1.2071
G1 X165.242 Y10.965 E.01181
M73 P92 R0
M73 Q92 S0
G1 X165.242 Y49.579 E1.2071
G1 X165.619 Y49.579 E.01181
G1 X165.619 Y10.965 E1.2071
G1 X165.997 Y10.965 E.01181
M73 P93 R0
M73 Q93 S0
G1 X165.997 Y49.579 E1.2071
G1 X166.375 Y49.579 E.01181
G1 X166.375 Y10.965 E1.2071
G1 X166.753 Y10.965 E.01181
G1 X166.753 Y49.579 E1.2071
G1 X167.131 Y49.579 E.01181
M73 P94 R0
M73 Q94 S0
G1 X167.131 Y10.965 E1.2071
G1 X167.509 Y10.965 E.01181
G1 X167.509 Y49.579 E1.2071
G1 X167.886 Y49.579 E.01181
M73 P95 R0
M73 Q95 S0
G1 X167.886 Y10.965 E1.2071
G1 X168.264 Y10.965 E.01181
G1 X168.264 Y49.579 E1.2071
G1 X168.642 Y49.579 E.01181
M73 P96 R0
M73 Q96 S0
G1 X168.642 Y10.965 E1.2071
G1 X169.02 Y10.965 E.01181
G1 X169.02 Y49.579 E1.2071
G1 X169.398 Y49.579 E.01181
G1 X169.398 Y10.965 E1.2071
G1 X169.776 Y10.965 E.01181
M73 P97 R0
M73 Q97 S0
G1 X169.776 Y49.579 E1.2071
G1 X170.153 Y49.579 E.01181
G1 X170.153 Y10.795 E1.21241
M204 S1000
; stop printing object first layer.stl id:0 copy 0
;WIPE_START
G1 F8640;_WIPE
M73 P98 R0
M73 Q98 S0
G1 X170.153 Y14.909 E-.95
;WIPE_END
G1 E-.05 F2100
G1 Z.6 F720
M107
;TYPE:Custom
; Filament-specific end gcode
G4 ; wait
M221 S100 ; reset flow
M900 K0 ; reset LA
M907 E538 ; reset extruder motor current
M104 S0 ; turn off temperature
M140 S0 ; turn off heatbed
M107 ; turn off fan
G1 Z30.2 ; Move print head up
G1 X0 Y200 F3000 ; home X axis
M84 ; disable motors
M73 P100 R0
M73 Q100 S0
; filament used [mm] = 268.84
; filament used [cm3] = 0.65
; filament used [g] = 0.80
; filament cost = 0.01
; total filament used [g] = 0.80
; total filament cost = 0.01
; estimated printing time (normal mode) = 7m 29s
; estimated printing time (silent mode) = 7m 29s

; prusaslicer_config = begin
; avoid_crossing_perimeters = 0
; avoid_crossing_perimeters_max_detour = 0
; bed_custom_model = 
; bed_custom_texture = 
; bed_shape = 0x0,250x0,250x210,0x210
; bed_temperature = 60
; before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
; between_objects_gcode = 
; bottom_fill_pattern = monotonic
; bottom_solid_layers = 1
; bottom_solid_min_thickness = 0
; bridge_acceleration = 1000
; bridge_angle = 0
; bridge_fan_speed = 100
; bridge_flow_ratio = 1
; bridge_speed = 25
; brim_separation = 0.1
; brim_type = outer_only
; brim_width = 0
; clip_multipart_objects = 1
; color_change_gcode = M600\nG1 E0.4 F1500 ; prime after color change
; compatible_printers_condition_cummulative = "printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4";"nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)"
; complete_objects = 0
; cooling = 1
; cooling_tube_length = 5
; cooling_tube_retraction = 91.5
; default_acceleration = 1000
; default_filament_profile = "Prusament PLA"
; default_print_profile = 0.15mm QUALITY @MK3
; deretract_speed = 0
; disable_fan_first_layers = 1
; dont_support_bridges = 0
; draft_shield = disabled
; duplicate_distance = 6
; elefant_foot_compensation = 0.2
; end_filament_gcode = "; Filament-specific end gcode"
; end_gcode = G4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
; ensure_vertical_shell_thickness = 1
; external_perimeter_extrusion_width = 0.45
; external_perimeter_speed = 25
; external_perimeters_first = 0
; extra_loading_move = -2
; extra_perimeters = 0
; extruder_clearance_height = 20
; extruder_clearance_radius = 45
; extruder_colour = ""
; extruder_offset = 0x0
; extrusion_axis = E
; extrusion_multiplier = 0.995
; extrusion_width = 0.45
; fan_always_on = 1
; fan_below_layer_time = 100
; filament_colour = #808080
; filament_cooling_final_speed = 3.4
; filament_cooling_initial_speed = 2.2
; filament_cooling_moves = 4
; filament_cost = 11
; filament_density = 1.24
; filament_diameter = 1.75
; filament_load_time = 0
; filament_loading_speed = 28
; filament_loading_speed_start = 3
; filament_max_volumetric_speed = 15.5
; filament_minimal_purge_on_wipe_tower = 15
; filament_notes = ""
; filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
; filament_retract_length = 1
; filament_settings_id = GST3D
; filament_soluble = 0
; filament_spool_weight = 0
; filament_toolchange_delay = 0
; filament_type = PLA
; filament_unload_time = 0
; filament_unloading_speed = 90
; filament_unloading_speed_start = 100
; filament_vendor = Generic
; fill_angle = 270
; fill_density = 0%
; fill_pattern = gyroid
; first_layer_acceleration = 800
; first_layer_acceleration_over_raft = 0
; first_layer_bed_temperature = 60
; first_layer_extrusion_width = 0.42
; first_layer_height = 0.2
; first_layer_speed = 20
; first_layer_speed_over_raft = 30
; first_layer_temperature = 215
; full_fan_speed_layer = 3
; fuzzy_skin = none
; fuzzy_skin_point_dist = 0.8
; fuzzy_skin_thickness = 0.3
; gap_fill_enabled = 1
; gap_fill_speed = 40
; gcode_comments = 0
; gcode_flavor = marlin
; gcode_label_objects = 1
; gcode_resolution = 0.0125
; gcode_substitutions = 
; high_current_on_filament_swap = 0
; host_type = octoprint
; infill_acceleration = 1000
; infill_anchor = 2.5
; infill_anchor_max = 12
; infill_every_layers = 1
; infill_extruder = 1
; infill_extrusion_width = 0.45
; infill_first = 0
; infill_only_where_needed = 0
; infill_overlap = 25%
; infill_speed = 80
; inherits_cummulative = ;"Generic PLA";
; interface_shells = 0
; ironing = 0
; ironing_flowrate = 15%
; ironing_spacing = 0.1
; ironing_speed = 15
; ironing_type = top
; layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
; layer_height = 0.15
; machine_limits_usage = emit_to_gcode
; machine_max_acceleration_e = 5000,5000
; machine_max_acceleration_extruding = 1250,1250
; machine_max_acceleration_retracting = 1250,1250
; machine_max_acceleration_travel = 1500,1250
; machine_max_acceleration_x = 1000,960
; machine_max_acceleration_y = 1000,960
; machine_max_acceleration_z = 200,200
; machine_max_feedrate_e = 120,120
; machine_max_feedrate_x = 200,100
; machine_max_feedrate_y = 200,100
; machine_max_feedrate_z = 12,12
; machine_max_jerk_e = 4.5,4.5
; machine_max_jerk_x = 8,8
; machine_max_jerk_y = 8,8
; machine_max_jerk_z = 0.4,0.4
; machine_min_extruding_rate = 0,0
; machine_min_travel_rate = 0,0
; max_fan_speed = 100
; max_layer_height = 0.25
; max_print_height = 210
; max_print_speed = 200
; max_volumetric_speed = 0
; min_fan_speed = 100
; min_layer_height = 0.07
; min_print_speed = 15
; min_skirt_length = 4
; mmu_segmented_region_max_width = 0
; notes = 
; nozzle_diameter = 0.4
; only_retract_when_crossing_perimeters = 0
; ooze_prevention = 0
; output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
; overhangs = 1
; parking_pos_retraction = 92
; pause_print_gcode = M601
; perimeter_acceleration = 800
; perimeter_extruder = 1
; perimeter_extrusion_width = 0.45
; perimeter_speed = 45
; perimeters = 1
; physical_printer_settings_id = 
; post_process = 
; print_settings_id = 0.15mm QUALITY @MK3
; printer_model = MK3S
; printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
; printer_settings_id = Original Prusa i3 MK3S & MK3S+
; printer_technology = FFF
; printer_variant = 0.4
; printer_vendor = 
; raft_contact_distance = 0.2
; raft_expansion = 1.5
; raft_first_layer_density = 90%
; raft_first_layer_expansion = 3
; raft_layers = 0
; remaining_times = 1
; resolution = 0
; retract_before_travel = 1
; retract_before_wipe = 0%
; retract_layer_change = 1
; retract_length = 0.8
; retract_length_toolchange = 4
; retract_lift = 0.4
; retract_lift_above = 0
; retract_lift_below = 209
; retract_restart_extra = 0
; retract_restart_extra_toolchange = 0
; retract_speed = 35
; seam_position = nearest
; silent_mode = 1
; single_extruder_multi_material = 0
; single_extruder_multi_material_priming = 0
; skirt_distance = 2
; skirt_height = 3
; skirts = 0
; slice_closing_radius = 0.049
; slicing_mode = regular
; slowdown_below_layer_time = 15
; small_perimeter_speed = 25
; solid_infill_below_area = 0
; solid_infill_every_layers = 0
; solid_infill_extruder = 1
; solid_infill_extrusion_width = 0.45
; solid_infill_speed = 80
; spiral_vase = 0
; standby_temperature_delta = -5
; start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
; start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
; support_material = 0
; support_material_angle = 0
; support_material_auto = 1
; support_material_bottom_contact_distance = 0
; support_material_bottom_interface_layers = 0
; support_material_buildplate_only = 0
; support_material_closing_radius = 2
; support_material_contact_distance = 0.2
; support_material_enforce_layers = 0
; support_material_extruder = 0
; support_material_extrusion_width = 0.35
; support_material_interface_contact_loops = 0
; support_material_interface_extruder = 0
; support_material_interface_layers = 2
; support_material_interface_pattern = rectilinear
; support_material_interface_spacing = 0.2
; support_material_interface_speed = 80%
; support_material_pattern = rectilinear
; support_material_spacing = 2
; support_material_speed = 50
; support_material_style = grid
; support_material_synchronize_layers = 0
; support_material_threshold = 50
; support_material_with_sheath = 0
; support_material_xy_spacing = 60%
; temperature = 210
; template_custom_gcode = 
; thick_bridges = 0
; thin_walls = 0
; threads = 12
; thumbnails = 
; toolchange_gcode = 
; top_fill_pattern = monotonic
; top_infill_extrusion_width = 0.4
; top_solid_infill_speed = 40
; top_solid_layers = 0
; top_solid_min_thickness = 0.7
; travel_speed = 180
; travel_speed_z = 12
; use_firmware_retraction = 0
; use_relative_e_distances = 1
; use_volumetric_e = 0
; variable_layer_height = 1
; wipe = 1
; wipe_into_infill = 0
; wipe_into_objects = 0
; wipe_tower = 1
; wipe_tower_bridging = 10
; wipe_tower_brim_width = 2
; wipe_tower_no_sparse_layers = 0
; wipe_tower_rotation_angle = 0
; wipe_tower_width = 60
; wipe_tower_x = 170
; wipe_tower_y = 125
; wiping_volumes_extruders = 70,70
; wiping_volumes_matrix = 0
; xy_size_compensation = 0
; z_offset = 0
; prusaslicer_config = end