; generated by PrusaSlicer 2.1.0+win64 on 2020-02-09 at 13:34:12 UTC

; 

; external perimeters extrusion width = 0.45mm
; perimeters extrusion width = 0.45mm
; infill extrusion width = 0.45mm
; solid infill extrusion width = 0.45mm
; top infill extrusion width = 0.40mm
; first layer extrusion width = 0.42mm

M73 P0 R5
M73 Q0 S5
M201 X1000 Y1000 Z1000 E5000 ; sets maximum accelerations, mm/sec^2
M203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec
M204 P1250 R1250 T1250 ; sets acceleration (P, T) and retract acceleration (R), mm/sec^2
M205 X8.00 Y8.00 Z0.40 E1.50 ; sets the jerk limits, mm/sec
M205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec
M107
M862.3 P "MK3S" ; printer model check
M862.1 P0.4 ; nozzle diameter check
M115 U3.8.1 ; tell printer latest fw version
G90 ; use absolute coordinates
M83  ; extruder relative mode
M140 S60 ; set bed temp
M109 S160 ; Set extruder temp before bed level
M190 S60 ; wait for bed temp

G28 W ; home all without mesh bed level
G80 ; mesh bed leveling set 3x3, 5x5, or 7x7 in settings menu

G1 Y-3.0 Z0.6 F1000.0 ; go outside print area

M109 S215 ; wait for extruder temp

G92 E0.0
G1 Z0.2 E8 ; Purge Bubble
M73 Q0 S5
M73 P0 R5
G1 X60.0 E9.0  F1000.0 ; intro line
G1 X100.0 E12.5  F1000.0 ; intro line
G92 E0.0
M221 S95
G21 ; set units to millimeters
G90 ; use absolute coordinates
M83 ; use relative distances for extrusion
M900 K30 ; Filament gcode
;BEFORE_LAYER_CHANGE
G92 E0.0
;0.2


G1 E-0.80000 F2100.00000
G1 Z0.600 F10800.000
;AFTER_LAYER_CHANGE
;0.2
G1 X102.587 Y82.587
G1 Z0.200
G1 E0.80000 F2100.00000
M204 S1000
G1 F1200
G1 X147.413 Y82.587 E1.40548
G1 X147.413 Y127.413 E1.40548
G1 X102.587 Y127.413 E1.40548
G1 X102.587 Y82.647 E1.40360
G1 X102.210 Y82.210 F10800.000
G1 F1200
G1 X147.790 Y82.210 E1.42913
G1 X147.790 Y127.790 E1.42913
G1 X102.210 Y127.790 E1.42913
G1 X102.210 Y82.270 E1.42725
G1 X102.596 Y82.314 F10800.000
G1 F8640
G1 X105.501 Y82.266 E-0.76000
G1 E-0.04000 F2100.00000
G1 Z0.800 F10800.000
G1 X102.700 Y126.536
G1 Z0.200
G1 E0.80000 F2100.00000
G1 F1200
G1 X103.295 Y127.130 E0.02643
G1 X103.829 Y127.130 E0.01680
G1 X102.870 Y126.171 E0.04265
G1 X102.870 Y125.636 E0.01680
G1 X104.364 Y127.130 E0.06641
G1 X104.898 Y127.130 E0.01680
G1 X102.870 Y125.102 E0.09017
G1 X102.870 Y124.567 E0.01680
G1 X105.433 Y127.130 E0.11393
G1 X105.968 Y127.130 E0.01680
G1 X102.870 Y124.032 E0.13769
G1 X102.870 Y123.498 E0.01680
G1 X106.502 Y127.130 E0.16146
G1 X107.037 Y127.130 E0.01680
G1 X102.870 Y122.963 E0.18522
G1 X102.870 Y122.429 E0.01680
G1 X107.571 Y127.130 E0.20898
G1 X108.106 Y127.130 E0.01680
G1 X102.870 Y121.894 E0.23274
G1 X102.870 Y121.360 E0.01680
G1 X108.640 Y127.130 E0.25651
G1 X109.175 Y127.130 E0.01680
G1 X102.870 Y120.825 E0.28027
G1 X102.870 Y120.290 E0.01680
G1 X109.710 Y127.130 E0.30403
G1 X110.244 Y127.130 E0.01680
G1 X102.870 Y119.756 E0.32779
G1 X102.870 Y119.221 E0.01680
G1 X110.779 Y127.130 E0.35155
G1 X111.313 Y127.130 E0.01680
G1 X102.870 Y118.687 E0.37532
G1 X102.870 Y118.152 E0.01680
G1 X111.848 Y127.130 E0.39908
G1 X112.383 Y127.130 E0.01680
G1 X102.870 Y117.617 E0.42284
G1 X102.870 Y117.083 E0.01680
G1 X112.917 Y127.130 E0.44660
G1 X113.452 Y127.130 E0.01680
G1 X102.870 Y116.548 E0.47037
G1 X102.870 Y116.014 E0.01680
G1 X113.986 Y127.130 E0.49413
G1 X114.521 Y127.130 E0.01680
G1 X102.870 Y115.479 E0.51789
G1 X102.870 Y114.945 E0.01680
G1 X115.055 Y127.130 E0.54165
G1 X115.590 Y127.130 E0.01680
G1 X102.870 Y114.410 E0.56541
G1 X102.870 Y113.875 E0.01680
G1 X116.125 Y127.130 E0.58918
G1 X116.659 Y127.130 E0.01680
G1 X102.870 Y113.341 E0.61294
G1 X102.870 Y112.806 E0.01680
G1 X117.194 Y127.130 E0.63670
G1 X117.728 Y127.130 E0.01680
G1 X102.870 Y112.272 E0.66046
G1 X102.870 Y111.737 E0.01680
G1 X118.263 Y127.130 E0.68423
G1 X118.797 Y127.130 E0.01680
G1 X102.870 Y111.203 E0.70799
G1 X102.870 Y110.668 E0.01680
G1 X119.332 Y127.130 E0.73175
G1 X119.867 Y127.130 E0.01680
G1 X102.870 Y110.133 E0.75551
G1 X102.870 Y109.599 E0.01680
G1 X120.401 Y127.130 E0.77927
G1 X120.936 Y127.130 E0.01680
G1 X102.870 Y109.064 E0.80304
G1 X102.870 Y108.530 E0.01680
G1 X121.470 Y127.130 E0.82680
G1 X122.005 Y127.130 E0.01680
G1 X102.870 Y107.995 E0.85056
G1 X102.870 Y107.460 E0.01680
G1 X122.540 Y127.130 E0.87432
G1 X123.074 Y127.130 E0.01680
G1 X102.870 Y106.926 E0.89809
G1 X102.870 Y106.391 E0.01680
G1 X123.609 Y127.130 E0.92185
G1 X124.143 Y127.130 E0.01680
G1 X102.870 Y105.857 E0.94561
G1 X102.870 Y105.322 E0.01680
G1 X124.678 Y127.130 E0.96937
G1 X125.212 Y127.130 E0.01680
G1 X102.870 Y104.788 E0.99313
M73 Q20 S4
M73 P20 R4
G1 X102.870 Y104.253 E0.01680
G1 X125.747 Y127.130 E1.01690
G1 X126.282 Y127.130 E0.01680
G1 X102.870 Y103.718 E1.04066
G1 X102.870 Y103.184 E0.01680
G1 X126.816 Y127.130 E1.06442
G1 X127.351 Y127.130 E0.01680
G1 X102.870 Y102.649 E1.08818
G1 X102.870 Y102.115 E0.01680
G1 X127.885 Y127.130 E1.11195
G1 X128.420 Y127.130 E0.01680
G1 X102.870 Y101.580 E1.13571
G1 X102.870 Y101.046 E0.01680
G1 X128.954 Y127.130 E1.15947
G1 X129.489 Y127.130 E0.01680
G1 X102.870 Y100.511 E1.18323
G1 X102.870 Y99.976 E0.01680
G1 X130.024 Y127.130 E1.20699
G1 X130.558 Y127.130 E0.01680
G1 X102.870 Y99.442 E1.23076
G1 X102.870 Y98.907 E0.01680
G1 X131.093 Y127.130 E1.25452
G1 X131.627 Y127.130 E0.01680
G1 X102.870 Y98.373 E1.27828
G1 X102.870 Y97.838 E0.01680
G1 X132.162 Y127.130 E1.30204
G1 X132.696 Y127.130 E0.01680
G1 X102.870 Y97.304 E1.32580
G1 X102.870 Y96.769 E0.01680
G1 X133.231 Y127.130 E1.34957
G1 X133.766 Y127.130 E0.01680
G1 X102.870 Y96.234 E1.37333
G1 X102.870 Y95.700 E0.01680
G1 X134.300 Y127.130 E1.39709
G1 X134.835 Y127.130 E0.01680
G1 X102.870 Y95.165 E1.42085
G1 X102.870 Y94.631 E0.01680
G1 X135.369 Y127.130 E1.44462
G1 X135.904 Y127.130 E0.01680
G1 X102.870 Y94.096 E1.46838
G1 X102.870 Y93.561 E0.01680
G1 X136.439 Y127.130 E1.49214
G1 X136.973 Y127.130 E0.01680
G1 X102.870 Y93.027 E1.51590
G1 X102.870 Y92.492 E0.01680
G1 X137.508 Y127.130 E1.53966
G1 X138.042 Y127.130 E0.01680
G1 X102.870 Y91.958 E1.56343
G1 X102.870 Y91.423 E0.01680
G1 X138.577 Y127.130 E1.58719
G1 X139.111 Y127.130 E0.01680
G1 X102.870 Y90.889 E1.61095
G1 X102.870 Y90.354 E0.01680
G1 X139.646 Y127.130 E1.63471
G1 X140.181 Y127.130 E0.01680
G1 X102.870 Y89.819 E1.65848
M73 Q41 S3
M73 P40 R3
G1 X102.870 Y89.285 E0.01680
G1 X140.715 Y127.130 E1.68224
G1 X141.250 Y127.130 E0.01680
G1 X102.870 Y88.750 E1.70600
G1 X102.870 Y88.216 E0.01680
G1 X141.784 Y127.130 E1.72976
G1 X142.319 Y127.130 E0.01680
G1 X102.870 Y87.681 E1.75352
G1 X102.870 Y87.147 E0.01680
G1 X142.853 Y127.130 E1.77729
G1 X143.388 Y127.130 E0.01680
G1 X102.870 Y86.612 E1.80105
G1 X102.870 Y86.077 E0.01680
G1 X143.923 Y127.130 E1.82481
G1 X144.457 Y127.130 E0.01680
G1 X102.870 Y85.543 E1.84857
G1 X102.870 Y85.008 E0.01680
G1 X144.992 Y127.130 E1.87234
G1 X145.526 Y127.130 E0.01680
G1 X102.870 Y84.474 E1.89610
G1 X102.870 Y83.939 E0.01680
G1 X146.061 Y127.130 E1.91986
G1 X146.596 Y127.130 E0.01680
G1 X102.870 Y83.404 E1.94362
G1 X102.870 Y82.870 E0.01680
G1 X147.130 Y127.130 E1.96738
G1 X147.130 Y126.596 E0.01680
G1 X103.404 Y82.870 E1.94362
G1 X103.939 Y82.870 E0.01680
G1 X147.130 Y126.061 E1.91986
G1 X147.130 Y125.526 E0.01680
G1 X104.474 Y82.870 E1.89610
G1 X105.008 Y82.870 E0.01680
G1 X147.130 Y124.992 E1.87234
G1 X147.130 Y124.457 E0.01680
G1 X105.543 Y82.870 E1.84858
G1 X106.077 Y82.870 E0.01680
G1 X147.130 Y123.923 E1.82481
G1 X147.130 Y123.388 E0.01680
G1 X106.612 Y82.870 E1.80105
G1 X107.146 Y82.870 E0.01680
G1 X147.130 Y122.854 E1.77729
M73 Q61 S2
M73 P61 R2
G1 X147.130 Y122.319 E0.01680
G1 X107.681 Y82.870 E1.75353
G1 X108.216 Y82.870 E0.01680
G1 X147.130 Y121.784 E1.72976
G1 X147.130 Y121.250 E0.01680
G1 X108.750 Y82.870 E1.70600
G1 X109.285 Y82.870 E0.01680
G1 X147.130 Y120.715 E1.68224
G1 X147.130 Y120.181 E0.01680
G1 X109.819 Y82.870 E1.65848
G1 X110.354 Y82.870 E0.01680
G1 X147.130 Y119.646 E1.63472
G1 X147.130 Y119.111 E0.01680
G1 X110.889 Y82.870 E1.61095
G1 X111.423 Y82.870 E0.01680
G1 X147.130 Y118.577 E1.58719
G1 X147.130 Y118.042 E0.01680
G1 X111.958 Y82.870 E1.56343
G1 X112.492 Y82.870 E0.01680
G1 X147.130 Y117.508 E1.53967
G1 X147.130 Y116.973 E0.01680
G1 X113.027 Y82.870 E1.51590
G1 X113.561 Y82.870 E0.01680
G1 X147.130 Y116.439 E1.49214
G1 X147.130 Y115.904 E0.01680
G1 X114.096 Y82.870 E1.46838
G1 X114.631 Y82.870 E0.01680
G1 X147.130 Y115.369 E1.44462
G1 X147.130 Y114.835 E0.01680
G1 X115.165 Y82.870 E1.42086
G1 X115.700 Y82.870 E0.01680
G1 X147.130 Y114.300 E1.39709
G1 X147.130 Y113.766 E0.01680
G1 X116.234 Y82.870 E1.37333
G1 X116.769 Y82.870 E0.01680
G1 X147.130 Y113.231 E1.34957
G1 X147.130 Y112.697 E0.01680
G1 X117.303 Y82.870 E1.32581
G1 X117.838 Y82.870 E0.01680
G1 X147.130 Y112.162 E1.30204
G1 X147.130 Y111.627 E0.01680
G1 X118.373 Y82.870 E1.27828
G1 X118.907 Y82.870 E0.01680
G1 X147.130 Y111.093 E1.25452
G1 X147.130 Y110.558 E0.01680
G1 X119.442 Y82.870 E1.23076
G1 X119.976 Y82.870 E0.01680
G1 X147.130 Y110.024 E1.20700
G1 X147.130 Y109.489 E0.01680
G1 X120.511 Y82.870 E1.18323
G1 X121.046 Y82.870 E0.01680
G1 X147.130 Y108.954 E1.15947
M73 Q82 S1
M73 P82 R1
G1 X147.130 Y108.420 E0.01680
G1 X121.580 Y82.870 E1.13571
G1 X122.115 Y82.870 E0.01680
G1 X147.130 Y107.885 E1.11195
G1 X147.130 Y107.351 E0.01680
G1 X122.649 Y82.870 E1.08818
G1 X123.184 Y82.870 E0.01680
G1 X147.130 Y106.816 E1.06442
G1 X147.130 Y106.282 E0.01680
G1 X123.718 Y82.870 E1.04066
G1 X124.253 Y82.870 E0.01680
G1 X147.130 Y105.747 E1.01690
G1 X147.130 Y105.212 E0.01680
G1 X124.788 Y82.870 E0.99314
G1 X125.322 Y82.870 E0.01680
G1 X147.130 Y104.678 E0.96937
G1 X147.130 Y104.143 E0.01680
G1 X125.857 Y82.870 E0.94561
G1 X126.391 Y82.870 E0.01680
G1 X147.130 Y103.609 E0.92185
G1 X147.130 Y103.074 E0.01680
G1 X126.926 Y82.870 E0.89809
G1 X127.460 Y82.870 E0.01680
G1 X147.130 Y102.540 E0.87432
G1 X147.130 Y102.005 E0.01680
G1 X127.995 Y82.870 E0.85056
G1 X128.530 Y82.870 E0.01680
G1 X147.130 Y101.470 E0.82680
G1 X147.130 Y100.936 E0.01680
G1 X129.064 Y82.870 E0.80304
G1 X129.599 Y82.870 E0.01680
G1 X147.130 Y100.401 E0.77928
G1 X147.130 Y99.867 E0.01680
G1 X130.133 Y82.870 E0.75551
G1 X130.668 Y82.870 E0.01680
G1 X147.130 Y99.332 E0.73175
G1 X147.130 Y98.797 E0.01680
G1 X131.202 Y82.870 E0.70799
G1 X131.737 Y82.870 E0.01680
G1 X147.130 Y98.263 E0.68423
G1 X147.130 Y97.728 E0.01680
G1 X132.272 Y82.870 E0.66046
G1 X132.806 Y82.870 E0.01680
G1 X147.130 Y97.194 E0.63670
G1 X147.130 Y96.659 E0.01680
G1 X133.341 Y82.870 E0.61294
G1 X133.875 Y82.870 E0.01680
G1 X147.130 Y96.125 E0.58918
G1 X147.130 Y95.590 E0.01680
G1 X134.410 Y82.870 E0.56542
G1 X134.945 Y82.870 E0.01680
G1 X147.130 Y95.055 E0.54165
G1 X147.130 Y94.521 E0.01680
G1 X135.479 Y82.870 E0.51789
G1 X136.014 Y82.870 E0.01680
G1 X147.130 Y93.986 E0.49413
G1 X147.130 Y93.452 E0.01680
G1 X136.548 Y82.870 E0.47037
G1 X137.083 Y82.870 E0.01680
G1 X147.130 Y92.917 E0.44660
G1 X147.130 Y92.383 E0.01680
G1 X137.617 Y82.870 E0.42284
G1 X138.152 Y82.870 E0.01680
G1 X147.130 Y91.848 E0.39908
G1 X147.130 Y91.313 E0.01680
G1 X138.687 Y82.870 E0.37532
G1 X139.221 Y82.870 E0.01680
G1 X147.130 Y90.779 E0.35156
G1 X147.130 Y90.244 E0.01680
G1 X139.756 Y82.870 E0.32779
G1 X140.290 Y82.870 E0.01680
G1 X147.130 Y89.710 E0.30403
G1 X147.130 Y89.175 E0.01680
G1 X140.825 Y82.870 E0.28027
G1 X141.359 Y82.870 E0.01680
G1 X147.130 Y88.641 E0.25651
G1 X147.130 Y88.106 E0.01680
G1 X141.894 Y82.870 E0.23275
G1 X142.429 Y82.870 E0.01680
G1 X147.130 Y87.571 E0.20898
G1 X147.130 Y87.037 E0.01680
G1 X142.963 Y82.870 E0.18522
G1 X143.498 Y82.870 E0.01680
G1 X147.130 Y86.502 E0.16146
G1 X147.130 Y85.968 E0.01680
G1 X144.032 Y82.870 E0.13770
G1 X144.567 Y82.870 E0.01680
G1 X147.130 Y85.433 E0.11393
G1 X147.130 Y84.898 E0.01680
G1 X145.102 Y82.870 E0.09017
G1 X145.636 Y82.870 E0.01680
G1 X147.130 Y84.364 E0.06641
G1 X147.130 Y83.829 E0.01680
G1 X146.171 Y82.870 E0.04265
G1 X146.705 Y82.870 E0.01680
G1 X147.300 Y83.464 E0.02643
G1 F8640;_WIPE
G1 X146.705 Y82.870 E-0.19415
G1 F8640;_WIPE
G1 X146.171 Y82.870 E-0.12344
G1 F8640;_WIPE
G1 X147.130 Y83.829 E-0.31330
G1 F8640;_WIPE
G1 X147.130 Y84.364 E-0.12344
G1 F8640;_WIPE
G1 X147.113 Y84.346 E-0.00568
G1 E-0.04000 F2100.00000
G1 Z0.800 F10800.000
; Filament-specific end gcode
G4 ; wait
M221 S100
M104 S0 ; turn off temperature
M140 S0 ; turn off heatbed
M107 ; turn off fan
G1 Z30.8 ; Move print head up
G1 X0 Y200 F3000 ; home X axis
M84 ; disable motors
M73 P100 R0
M73 Q100 S0
; filament used [mm] = 177.0
; filament used [cm3] = 0.4
; filament used [g] = 0.5
; filament cost = 0.0
; total filament used [g] = 0.5
; total filament cost = 0.0
; estimated printing time (normal mode) = 4m 57s
; estimated printing time (silent mode) = 4m 58s

; avoid_crossing_perimeters = 0
; bed_custom_model = C:\\Users\\Nils Kal\\Downloads\\prusa_i3_mk3_prusaslicer.stl
; bed_custom_texture = 
; bed_shape = 0x0,250x0,250x210,0x210
; bed_temperature = 60
; before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
; between_objects_gcode = 
; bottom_fill_pattern = rectilinear
; bottom_solid_layers = 4
; bridge_acceleration = 1000
; bridge_angle = 0
; bridge_fan_speed = 100
; bridge_flow_ratio = 0.95
; bridge_speed = 30
; brim_width = 0
; clip_multipart_objects = 1
; compatible_printers_condition_cummulative = "printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4";"! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)"
; complete_objects = 0
; cooling = 1
; cooling_tube_length = 5
; cooling_tube_retraction = 91.5
; default_acceleration = 1000
; default_filament_profile = "Prusament PLA"
; default_print_profile = 0.15mm QUALITY MK3
; deretract_speed = 0
; disable_fan_first_layers = 1
; dont_support_bridges = 1
; duplicate_distance = 6
; elefant_foot_compensation = 0
; end_filament_gcode = "; Filament-specific end gcode"
; end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
; ensure_vertical_shell_thickness = 1
; external_perimeter_extrusion_width = 0.45
; external_perimeter_speed = 35
; external_perimeters_first = 0
; extra_loading_move = -2
; extra_perimeters = 0
; extruder_clearance_height = 25
; extruder_clearance_radius = 45
; extruder_colour = ""
; extruder_offset = 0x0
; extrusion_axis = E
; extrusion_multiplier = 1
; extrusion_width = 0.45
; fan_always_on = 1
; fan_below_layer_time = 100
; filament_colour = #FF8000
; filament_cooling_final_speed = 3.4
; filament_cooling_initial_speed = 2.2
; filament_cooling_moves = 4
; filament_cost = 24.99
; filament_density = 1.24
; filament_diameter = 1.75
; filament_load_time = 0
; filament_loading_speed = 28
; filament_loading_speed_start = 3
; filament_max_volumetric_speed = 15
; filament_minimal_purge_on_wipe_tower = 15
; filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa"
; filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
; filament_settings_id = "Prusament PLA"
; filament_soluble = 0
; filament_toolchange_delay = 0
; filament_type = PLA
; filament_unload_time = 0
; filament_unloading_speed = 90
; filament_unloading_speed_start = 100
; fill_angle = 45
; fill_density = 20%
; fill_pattern = grid
; first_layer_acceleration = 1000
; first_layer_bed_temperature = 60
; first_layer_extrusion_width = 0.42
; first_layer_height = 0.2
; first_layer_speed = 20
; first_layer_temperature = 215
; gap_fill_speed = 40
; gcode_comments = 0
; gcode_flavor = marlin
; gcode_label_objects = 0
; high_current_on_filament_swap = 0
; host_type = octoprint
; infill_acceleration = 1250
; infill_every_layers = 1
; infill_extruder = 1
; infill_extrusion_width = 0.45
; infill_first = 0
; infill_only_where_needed = 0
; infill_overlap = 25%
; infill_speed = 200
; inherits_cummulative = ;;"Original Prusa i3 MK3S"
; interface_shells = 0
; layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
; layer_height = 0.2
; machine_max_acceleration_e = 5000,5000
; machine_max_acceleration_extruding = 1250,1250
; machine_max_acceleration_retracting = 1250,1250
; machine_max_acceleration_x = 1000,960
; machine_max_acceleration_y = 1000,960
; machine_max_acceleration_z = 1000,1000
; machine_max_feedrate_e = 120,120
; machine_max_feedrate_x = 200,100
; machine_max_feedrate_y = 200,100
; machine_max_feedrate_z = 12,12
; machine_max_jerk_e = 1.5,1.5
; machine_max_jerk_x = 8,8
; machine_max_jerk_y = 8,8
; machine_max_jerk_z = 0.4,0.4
; machine_min_extruding_rate = 0,0
; machine_min_travel_rate = 0,0
; max_fan_speed = 100
; max_layer_height = 0.25
; max_print_height = 210
; max_print_speed = 200
; max_volumetric_speed = 0
; min_fan_speed = 100
; min_layer_height = 0.07
; min_print_speed = 15
; min_skirt_length = 4
; notes = 
; nozzle_diameter = 0.4
; only_retract_when_crossing_perimeters = 0
; ooze_prevention = 0
; output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
; overhangs = 0
; parking_pos_retraction = 92
; perimeter_acceleration = 800
; perimeter_extruder = 1
; perimeter_extrusion_width = 0.45
; perimeter_speed = 60
; perimeters = 2
; post_process = 
; print_host = 
; print_settings_id = 0.20mm SPEED MK3
; printer_model = MK3S
; printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
; printer_settings_id = MEIN MK3S
; printer_technology = FFF
; printer_variant = 0.4
; printer_vendor = 
; printhost_apikey = 
; printhost_cafile = 
; raft_layers = 0
; remaining_times = 1
; resolution = 0
; retract_before_travel = 1
; retract_before_wipe = 0%
; retract_layer_change = 1
; retract_length = 0.8
; retract_length_toolchange = 4
; retract_lift = 0.6
; retract_lift_above = 0
; retract_lift_below = 209
; retract_restart_extra = 0
; retract_restart_extra_toolchange = 0
; retract_speed = 35
; seam_position = nearest
; serial_port = 
; serial_speed = 250000
; silent_mode = 1
; single_extruder_multi_material = 0
; single_extruder_multi_material_priming = 0
; skirt_distance = 2
; skirt_height = 3
; skirts = 0
; slice_closing_radius = 0.049
; slowdown_below_layer_time = 20
; small_perimeter_speed = 25
; solid_infill_below_area = 0
; solid_infill_every_layers = 0
; solid_infill_extruder = 1
; solid_infill_extrusion_width = 0.45
; solid_infill_speed = 200
; spiral_vase = 0
; standby_temperature_delta = -5
; start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}18{else}30{endif} ; Filament gcode"
; start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83  ; extruder relative mode\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S160 ; Set extruder temp before bed level\nM190 S[first_layer_bed_temperature] ; wait for bed temp\n\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling set 3x3, 5x5, or 7x7 in settings menu\n\nG1 Y-3.0 Z0.6 F1000.0 ; go outside print area\n\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG92 E0.0\nG1 Z0.2 E8 ; Purge Bubble\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n
; support_material = 0
; support_material_angle = 0
; support_material_auto = 1
; support_material_buildplate_only = 0
; support_material_contact_distance = 0.1
; support_material_enforce_layers = 0
; support_material_extruder = 0
; support_material_extrusion_width = 0.35
; support_material_interface_contact_loops = 0
; support_material_interface_extruder = 0
; support_material_interface_layers = 2
; support_material_interface_spacing = 0.2
; support_material_interface_speed = 100%
; support_material_pattern = rectilinear
; support_material_spacing = 2
; support_material_speed = 50
; support_material_synchronize_layers = 0
; support_material_threshold = 55
; support_material_with_sheath = 0
; support_material_xy_spacing = 50%
; temperature = 215
; thin_walls = 0
; threads = 24
; toolchange_gcode = 
; top_fill_pattern = rectilinear
; top_infill_extrusion_width = 0.4
; top_solid_infill_speed = 50
; top_solid_layers = 5
; travel_speed = 180
; use_firmware_retraction = 0
; use_relative_e_distances = 1
; use_volumetric_e = 0
; variable_layer_height = 1
; wipe = 1
; wipe_into_infill = 0
; wipe_into_objects = 0
; wipe_tower = 1
; wipe_tower_bridging = 10
; wipe_tower_rotation_angle = 0
; wipe_tower_width = 60
; wipe_tower_x = 170
; wipe_tower_y = 125
; wiping_volumes_extruders = 70,70
; wiping_volumes_matrix = 0
; xy_size_compensation = 0
; z_offset = 0