Thanks for downloading! We hope you enjoy the TALON 3DP!

This folder and its contents are licensed under the Creative Commons (4.0 International License) Attribution-NonCommercial

RECOMMENDED PRINT SETTINGS
    MATERIAL: PETG
    NOZZLE: 250°C
    BED: 90°C (textured sheet)
    COOLING: none
    LAYER HEIGHT: 0.2mm
    SUPPORTS: none 
    PART ORIENTATION: Outer faces on build plate
    TIPS: 
        - Adjust first layer height to minimize elephant's foot 
        - After printing, use a butane torch to quickly burn away any stringing
        - It may be necessary to scrape or sand out any high spots or blobs within the TALON_BODY
        - It may be necessary to scrape or sand off any high spots or blobs on the TALON_SLIDE
        - Parts may not fit together or slide freely until cool
        - Knife should slide freely after a short break in period 

 If you'd like to remix with ease, you can purchase our design pack and download CAD editable .step files.
 https://www.hall-precision.com/product-page/design-pack-3dp-talon

Happy Printing!