Hello,

I wish to get a 3" carbon frame cut.

Please find as attachements the DXF files, and here is a summary of the cuts :
- 1 x 4mm bottom plate, chamfered both sides
- 1 x 2mm top plate, chamfered one side
- 1 x 2.5mm cinematic camera plate (left)
- 1 x 2.5mm cinematic camera plate (right)

Be aware of a few points :
- 6 countersunk on the top plate (one side)
- 1.2mm pocket on camera plates
- 1mm depth around stack holes

Also as attachements : some pictures and a STL file to get a clear overview.

Could you provide me with 2 quotations : one with chamfers (bottom, top plate) and an other without.

I am available for any question.
Regards,