; generated by PrusaSlicer 2.3.0+win64 on 2021-06-08 at 12:15:04 UTC

; 

; external perimeters extrusion width = 0.45mm
; perimeters extrusion width = 0.45mm
; infill extrusion width = 0.45mm
; solid infill extrusion width = 0.45mm
; top infill extrusion width = 0.40mm
; first layer extrusion width = 0.80mm

M73 P0 R4
M73 Q0 S4
M201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2
M203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec
M204 P1250 R1250 T1250 ; sets acceleration (P, T) and retract acceleration (R), mm/sec^2
M205 X8.00 Y8.00 Z0.40 E4.50 ; sets the jerk limits, mm/sec
M205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec
M107
;TYPE:Custom
M862.3 P "MK3S" ; printer model check
M862.1 P0.4 ; nozzle diameter check
M115 U3.10.0 ; tell printer latest fw version
G90 ; use absolute coordinates
M83 ; extruder relative mode
M104 S238 ; set extruder temp
M140 S80 ; set bed temp
M190 S80 ; wait for bed temp
M109 S238 ; wait for extruder temp
G28 W ; home all without mesh bed level
G80 ; mesh bed leveling
G1 Y-3.0 F1000.0 ; go outside print area
G92 E0.0
G1 X60.0 E9.0 F1000.0 ; intro line
M73 P1 R4
M73 Q1 S4
G1 X100.0 E12.5 F1000.0 ; intro line
G92 E0.0
M221 S95

; Don't change E values below. Excessive value can damage the printer.
M907 E430 ; set extruder motor current
G21 ; set units to millimeters
G90 ; use absolute coordinates
M83 ; use relative distances for extrusion
M900 K0.08 ; Filament gcode LA 1.5
M900 K45 ; Filament gcode LA 1.0
;LAYER_CHANGE
;Z:0.3
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;0.3


M73 P2 R4
M73 Q2 S4
G1 E-1.00000 F2100.000
G1 Z0.200 F10800.000
G1 Z0.300
;AFTER_LAYER_CHANGE
;0.3
G1 Z0.500
G1 X114.126 Y97.000
M73 P3 R4
M73 Q3 S4
G1 Z0.300
G1 E1.00000 F2100.000
M204 S1000
;TYPE:Skirt
;WIDTH:0.8
G1 F1200.000
G1 X114.625 Y96.555 E0.05994
G1 X115.222 Y96.194 E0.06249
G1 X115.863 Y95.953 E0.06140
G1 X116.563 Y95.832 E0.06358
G1 X130.706 Y95.821 E1.26716
G1 X133.475 Y95.835 E0.24805
G1 X134.125 Y95.950 E0.05921
G1 X134.704 Y96.160 E0.05519
G1 X135.385 Y96.563 E0.07087
G1 X135.954 Y97.089 E0.06941
G1 X136.439 Y97.787 E0.07613
G1 X136.732 Y98.495 E0.06867
G1 X136.885 Y99.524 E0.09320
G1 X136.876 Y110.676 E0.99919
M73 Q4 S4
G1 X136.773 Y111.329 E0.05920
G1 X136.591 Y111.873 E0.05137
G1 X136.295 Y112.436 E0.05701
M73 P4 R4
G1 X135.874 Y112.977 E0.06140
G1 X135.315 Y113.465 E0.06649
G1 X134.605 Y113.861 E0.07285
G1 X133.884 Y114.084 E0.06759
G1 X133.170 Y114.157 E0.06431
G1 X116.611 Y114.148 E1.48360
G1 X115.950 Y114.046 E0.05993
G1 X115.402 Y113.864 E0.05173
G1 X114.835 Y113.566 E0.05738
G1 X114.294 Y113.145 E0.06139
G1 X113.809 Y112.589 E0.06613
G1 X113.412 Y111.880 E0.07285
G1 X113.189 Y111.163 E0.06722
G1 X113.115 Y110.449 E0.06431
G1 X113.126 Y99.260 E1.00248
G1 X113.240 Y98.597 E0.06030
G1 X113.452 Y98.006 E0.05629
G1 X114.092 Y97.050 E0.10302
;WIPE_START
M73 Q5 S4
G1 F8640.000
G1 X114.625 Y96.555 E-0.16792
G1 X115.222 Y96.194 E-0.16105
G1 X115.863 Y95.953 E-0.15823
G1 X116.563 Y95.832 E-0.16386
G1 X117.857 Y95.831 E-0.29894
;WIPE_END
G1 E-0.05000 F2100.000
G1 Z0.500 F10800.000
G1 X112.344 Y97.289
M73 P5 R4
G1 Z0.300
G1 E1.00000 F2100.000
G1 F1200.000
G1 X112.838 Y96.498 E0.08359
G1 X113.339 Y95.934 E0.06758
G1 X113.767 Y95.562 E0.05081
G1 X114.293 Y95.207 E0.05683
G1 X115.082 Y94.831 E0.07829
G1 X115.879 Y94.605 E0.07424
G1 X116.664 Y94.516 E0.07076
G1 X133.306 Y94.514 E1.49109
G1 X134.104 Y94.602 E0.07185
G1 X134.829 Y94.799 E0.06733
G1 X135.483 Y95.084 E0.06390
G1 X136.270 Y95.591 E0.08393
G1 X136.843 Y96.117 E0.06970
G1 X137.171 Y96.509 E0.04576
G1 X137.451 Y96.918 E0.04439
G1 X137.854 Y97.732 E0.08137
G1 X138.106 Y98.613 E0.08215
G1 X138.194 Y99.413 E0.07205
G1 X138.189 Y110.654 E1.00717
M73 Q6 S4
G1 X138.135 Y111.201 E0.04923
G1 X138.020 Y111.742 E0.04951
G1 X137.634 Y112.736 E0.09554
M73 P6 R4
G1 X137.352 Y113.213 E0.04970
G1 X136.981 Y113.705 E0.05515
G1 X136.359 Y114.314 E0.07803
G1 X135.617 Y114.821 E0.08049
G1 X134.912 Y115.149 E0.06972
G1 X134.133 Y115.369 E0.07252
G1 X133.298 Y115.463 E0.07529
G1 X116.697 Y115.464 E1.48735
G1 X115.722 Y115.338 E0.08808
G1 X114.843 Y115.050 E0.08285
G1 X114.169 Y114.695 E0.06826
G1 X113.522 Y114.214 E0.07220
G1 X112.880 Y113.534 E0.08385
G1 X112.252 Y112.496 E0.10864
G1 X111.943 Y111.594 E0.08540
G1 X111.810 Y110.681 E0.08266
G1 X111.814 Y99.231 E1.02587
M73 Q7 S4
G1 X111.977 Y98.249 E0.08923
G1 X112.322 Y97.345 E0.08665
G1 X113.010 Y97.608 F10800.000
G1 F1200.000
G1 X113.441 Y96.920 E0.07272
G1 X113.868 Y96.445 E0.05728
G1 X114.229 Y96.135 E0.04252
M73 P7 R4
G1 X114.678 Y95.834 E0.04848
G1 X115.365 Y95.511 E0.06803
G1 X116.044 Y95.323 E0.06316
G1 X116.722 Y95.249 E0.06106
G1 X133.250 Y95.248 E1.48080
G1 X133.943 Y95.321 E0.06248
G1 X134.566 Y95.487 E0.05770
G1 X135.115 Y95.722 E0.05354
G1 X135.799 Y96.157 E0.07265
G1 X136.297 Y96.612 E0.06043
G1 X136.575 Y96.940 E0.03853
G1 X136.828 Y97.310 E0.04020
G1 X137.177 Y98.023 E0.07111
G1 X137.389 Y98.780 E0.07040
G1 X137.458 Y99.431 E0.05867
G1 X137.455 Y110.602 E1.00087
G1 X137.410 Y111.070 E0.04207
G1 X137.307 Y111.559 E0.04476
G1 X136.962 Y112.435 E0.08442
G1 X136.732 Y112.817 E0.03993
M73 Q8 S4
G1 X136.443 Y113.203 E0.04316
G1 X135.913 Y113.729 E0.06692
G1 X135.274 Y114.169 E0.06950
G1 X134.681 Y114.450 E0.05880
M73 P7 R3
G1 X133.963 Y114.653 E0.06689
G1 X133.278 Y114.728 E0.06168
G1 X116.762 Y114.731 E1.47973
M73 P8 R3
M73 Q8 S3
G1 X115.915 Y114.628 E0.07642
G1 X115.104 Y114.361 E0.07651
G1 X114.541 Y114.060 E0.05724
G1 X114.030 Y113.680 E0.05702
G1 X113.487 Y113.116 E0.07015
G1 X112.903 Y112.152 E0.10099
G1 X112.652 Y111.396 E0.07140
G1 X112.546 Y110.656 E0.06699
G1 X112.546 Y99.316 E1.01593
G1 X112.679 Y98.474 E0.07638
G1 X112.988 Y97.664 E0.07773
;WIPE_START
G1 F8640.000
G1 X113.441 Y96.920 E-0.20103
G1 X113.868 Y96.445 E-0.14763
G1 X114.229 Y96.135 E-0.10957
G1 X114.678 Y95.834 E-0.12494
G1 X115.365 Y95.511 E-0.17532
G1 X116.044 Y95.323 E-0.16277
G1 X116.168 Y95.309 E-0.02874
;WIPE_END
G1 E-0.05000 F2100.000
G1 Z0.500 F10800.000
G1 X114.352 Y98.212
M73 Q9 S3
G1 Z0.300
G1 E1.00000 F2100.000
G1 F1200.000
G1 X114.637 Y97.778 E0.04650
G1 X114.870 Y97.523 E0.03093
G1 X115.089 Y97.330 E0.02618
G1 X115.446 Y97.090 E0.03857
G1 X115.917 Y96.876 E0.04635
G1 X116.358 Y96.761 E0.04080
G1 X116.826 Y96.717 E0.04215
G1 X133.177 Y96.717 E1.46495
M73 P9 R3
G1 X133.683 Y96.769 E0.04554
G1 X134.053 Y96.866 E0.03427
G1 X134.395 Y97.006 E0.03309
G1 X134.867 Y97.297 E0.04968
G1 X135.210 Y97.604 E0.04127
G1 X135.403 Y97.830 E0.02664
G1 X135.580 Y98.091 E0.02825
G1 X135.803 Y98.548 E0.04559
G1 X135.934 Y99.005 E0.04252
G1 X135.987 Y99.473 E0.04221
G1 X135.985 Y110.533 E0.99089
G1 X135.955 Y110.851 E0.02867
G1 X135.895 Y111.145 E0.02691
G1 X135.667 Y111.735 E0.05665
G1 X135.512 Y111.994 E0.02702
G1 X135.304 Y112.270 E0.03092
G1 X134.937 Y112.626 E0.04589
G1 X134.507 Y112.913 E0.04630
G1 X134.127 Y113.085 E0.03735
G1 X133.640 Y113.216 E0.04516
G1 X133.174 Y113.260 E0.04201
G1 X116.807 Y113.260 E1.46638
M73 P10 R3
M73 Q10 S3
G1 X116.233 Y113.191 E0.05180
G1 X115.733 Y113.030 E0.04700
G1 X115.326 Y112.816 E0.04120
G1 X114.965 Y112.543 E0.04056
G1 X114.612 Y112.166 E0.04630
G1 X114.267 Y111.597 E0.05962
G1 X114.095 Y111.104 E0.04674
G1 X114.017 Y110.598 E0.04589
G1 X114.017 Y99.379 E1.00511
G1 X114.116 Y98.799 E0.05277
G1 X114.329 Y98.268 E0.05129
G1 X114.991 Y98.575 F10800.000
G1 F1200.000
G1 X115.202 Y98.251 E0.03467
G1 X115.398 Y98.036 E0.02606
G1 X115.554 Y97.900 E0.01849
G1 X115.787 Y97.743 E0.02521
G1 X116.137 Y97.579 E0.03465
G1 X116.512 Y97.481 E0.03469
G1 X116.841 Y97.453 E0.02958
G1 X133.157 Y97.453 E1.46187
M73 Q11 S3
G1 X133.575 Y97.497 E0.03765
G1 X133.804 Y97.559 E0.02119
G1 X134.045 Y97.654 E0.02325
G1 X134.407 Y97.872 E0.03786
G1 X134.672 Y98.106 E0.03173
G1 X134.808 Y98.262 E0.01847
G1 X134.957 Y98.483 E0.02389
G1 X135.108 Y98.790 E0.03067
G1 X135.208 Y99.125 E0.03127
G1 X135.251 Y99.495 E0.03342
G1 X135.251 Y110.481 E0.98426
M73 P11 R3
G1 X135.225 Y110.760 E0.02509
G1 X135.182 Y110.962 E0.01855
G1 X135.016 Y111.390 E0.04109
G1 X134.912 Y111.569 E0.01860
G1 X134.736 Y111.801 E0.02606
G1 X134.456 Y112.068 E0.03467
G1 X134.133 Y112.279 E0.03455
G1 X133.860 Y112.399 E0.02671
G1 X133.488 Y112.496 E0.03446
G1 X133.159 Y112.524 E0.02959
G1 X116.826 Y112.524 E1.46334
G1 X116.414 Y112.477 E0.03713
G1 X116.045 Y112.363 E0.03468
G1 X115.699 Y112.181 E0.03498
G1 X115.442 Y111.982 E0.02914
G1 X115.179 Y111.696 E0.03476
G1 X114.946 Y111.311 E0.04036
G1 X114.815 Y110.948 E0.03455
G1 X114.752 Y110.566 E0.03467
G1 X114.752 Y99.414 E0.99922
M73 Q12 S3
G1 X114.832 Y98.968 E0.04059
G1 X114.968 Y98.631 E0.03257
;WIPE_START
G1 F8640.000
G1 X115.202 Y98.251 E-0.10298
M73 P12 R3
G1 X115.398 Y98.036 E-0.06717
G1 X115.554 Y97.900 E-0.04766
G1 X115.787 Y97.743 E-0.06498
G1 X116.137 Y97.579 E-0.08931
G1 X116.512 Y97.481 E-0.08940
G1 X116.841 Y97.453 E-0.07624
G1 X118.626 Y97.453 E-0.41227
;WIPE_END
G1 E-0.05000 F2100.000
G1 Z0.500 F10800.000
G1 X116.014 Y98.474
G1 Z0.300
G1 E1.00000 F2100.000
G1 F1200.000
G1 X116.136 Y98.391 E0.01327
G1 X116.369 Y98.277 E0.02319
G1 X116.613 Y98.210 E0.02271
G1 X116.858 Y98.188 E0.02201
G1 X133.140 Y98.188 E1.45878
G1 X133.421 Y98.217 E0.02526
G1 X133.557 Y98.252 E0.01257
G1 X133.743 Y98.325 E0.01794
G1 X133.987 Y98.476 E0.02572
G1 X134.156 Y98.630 E0.02048
G1 X134.329 Y98.866 E0.02623
G1 X134.429 Y99.076 E0.02081
G1 X134.490 Y99.291 E0.02001
G1 X134.517 Y99.550 E0.02336
G1 X134.517 Y110.429 E0.97471
G1 X134.471 Y110.772 E0.03101
G1 X134.309 Y111.146 E0.03654
G1 X134.170 Y111.330 E0.02065
G1 X133.984 Y111.503 E0.02275
G1 X133.765 Y111.642 E0.02319
G1 X133.638 Y111.698 E0.01251
G1 X133.387 Y111.767 E0.02331
M73 Q13 S3
G1 X133.142 Y111.789 E0.02201
G1 X116.844 Y111.788 E1.46023
M73 P13 R3
G1 X116.586 Y111.762 E0.02320
G1 X116.344 Y111.690 E0.02261
G1 X116.119 Y111.576 E0.02259
G1 X115.920 Y111.422 E0.02259
G1 X115.752 Y111.234 E0.02259
G1 X115.621 Y111.018 E0.02259
G1 X115.532 Y110.782 E0.02259
G1 X115.488 Y110.532 E0.02276
G1 X115.488 Y99.445 E0.99329
G1 X115.532 Y99.197 E0.02259
G1 X115.634 Y98.934 E0.02530
G1 X115.769 Y98.721 E0.02259
G1 X115.968 Y98.513 E0.02579
; printing object LED_Cover_Remote_LED.stl id:0 copy 0
G1 X116.507 Y99.355 F10800.000
;TYPE:External perimeter
G1 F1200.000
G1 X116.633 Y99.223 E0.01630
G1 X116.815 Y99.160 E0.01724
G1 X133.118 Y99.156 E1.46069
M73 Q14 S3
G1 X133.268 Y99.177 E0.01357
G1 X133.382 Y99.234 E0.01141
G1 X133.501 Y99.371 E0.01630
G1 X133.550 Y99.579 E0.01915
G1 X133.550 Y110.389 E0.96849
M73 P14 R3
G1 X133.529 Y110.539 E0.01357
G1 X133.473 Y110.653 E0.01141
G1 X133.335 Y110.772 E0.01630
G1 X133.127 Y110.821 E0.01916
G1 X116.882 Y110.821 E1.45546
G1 X116.732 Y110.800 E0.01357
G1 X116.618 Y110.744 E0.01141
G1 X116.499 Y110.606 E0.01630
G1 X116.450 Y110.398 E0.01915
G1 X116.454 Y99.529 E0.97382
G1 X116.482 Y99.409 E0.01102
G1 X116.689 Y99.353 F10800.000
G1 X117.189 Y99.893
;TYPE:Perimeter
G1 F1200.000
G1 X132.814 Y99.892 E1.39992
M73 P15 R3
M73 Q15 S3
G1 X132.814 Y110.085 E0.91327
G1 X117.186 Y110.085 E1.40023
G1 X117.189 Y99.953 E0.90780
;WIPE_START
M73 Q16 S3
G1 F8640.000
G1 X121.303 Y99.937 E-0.95000
;WIPE_END
M73 P16 R3
G1 E-0.05000 F2100.000
G1 Z0.500 F10800.000
G1 X132.249 Y100.113
G1 Z0.300
G1 E1.00000 F2100.000
;TYPE:Solid infill
;WIDTH:0.827421
G1 F1200.000
G1 X132.249 Y109.534 E0.87553
G1 X131.486 Y109.534 E0.07091
G1 X131.486 Y100.444 E0.84476
G1 X130.723 Y100.444 E0.07091
G1 X130.723 Y109.534 E0.84476
G1 X129.960 Y109.534 E0.07091
G1 X129.960 Y100.444 E0.84475
M73 P17 R3
M73 Q17 S3
G1 X129.197 Y100.444 E0.07091
G1 X129.197 Y109.534 E0.84475
G1 X128.434 Y109.534 E0.07091
G1 X128.434 Y100.444 E0.84474
G1 X127.671 Y100.444 E0.07091
G1 X127.671 Y109.534 E0.84474
G1 X126.908 Y109.534 E0.07091
G1 X126.908 Y100.444 E0.84473
M73 Q18 S3
G1 X126.145 Y100.444 E0.07091
G1 X126.145 Y109.534 E0.84473
M73 P18 R3
G1 X125.382 Y109.534 E0.07091
G1 X125.382 Y100.444 E0.84472
G1 X124.619 Y100.444 E0.07091
G1 X124.619 Y109.534 E0.84472
G1 X123.855 Y109.534 E0.07091
G1 X123.855 Y100.444 E0.84471
G1 X123.092 Y100.444 E0.07091
G1 X123.092 Y109.534 E0.84471
M73 P19 R3
M73 Q19 S3
G1 X122.329 Y109.534 E0.07091
G1 X122.329 Y100.444 E0.84470
G1 X121.566 Y100.444 E0.07091
G1 X121.566 Y109.534 E0.84470
G1 X120.803 Y109.534 E0.07091
G1 X120.803 Y100.444 E0.84470
G1 X120.040 Y100.444 E0.07091
G1 X120.040 Y109.534 E0.84469
M73 Q20 S3
G1 X119.277 Y109.534 E0.07091
G1 X119.277 Y100.444 E0.84469
M73 P20 R3
G1 X118.514 Y100.445 E0.07091
G1 X118.514 Y109.534 E0.84468
G1 X117.751 Y109.534 E0.07091
G1 X117.751 Y100.114 E0.87544
; stop printing object LED_Cover_Remote_LED.stl id:0 copy 0
;LAYER_CHANGE
;Z:0.5
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;0.5


;WIPE_START
G1 F8640.000
G1 X117.751 Y104.228 E-0.95000
;WIPE_END
G1 E-0.05000 F2100.000
G1 Z0.500 F10800.000
;AFTER_LAYER_CHANGE
;0.5
M104 S233 ; set temperature
M140 S75 ; set bed temperature
G1 Z0.700
G1 X113.452 Y98.006
G1 Z0.500
G1 E1.00000 F2100.000
;TYPE:Skirt
;WIDTH:0.8
G1 F2050
G1 X114.126 Y97.000 E0.07437
G1 X114.625 Y96.555 E0.04112
G1 X115.222 Y96.194 E0.04287
G1 X115.863 Y95.953 E0.04212
M73 Q21 S3
G1 X116.563 Y95.832 E0.04362
G1 X130.706 Y95.821 E0.86942
M73 P21 R3
G1 X133.475 Y95.835 E0.17019
G1 X134.125 Y95.950 E0.04062
G1 X134.704 Y96.160 E0.03787
G1 X135.385 Y96.563 E0.04862
G1 X135.954 Y97.089 E0.04762
G1 X136.439 Y97.787 E0.05223
G1 X136.732 Y98.495 E0.04712
G1 X136.885 Y99.524 E0.06395
G1 X136.876 Y110.676 E0.68556
G1 X136.773 Y111.329 E0.04062
G1 X136.591 Y111.873 E0.03525
G1 X136.295 Y112.436 E0.03912
G1 X135.874 Y112.977 E0.04213
G1 X135.315 Y113.465 E0.04562
G1 X134.605 Y113.861 E0.04999
G1 X133.884 Y114.084 E0.04637
G1 X133.170 Y114.157 E0.04413
G1 X116.611 Y114.148 E1.01792
G1 X115.950 Y114.046 E0.04112
G1 X115.402 Y113.864 E0.03549
G1 X114.835 Y113.566 E0.03937
G1 X114.294 Y113.145 E0.04212
G1 X113.809 Y112.589 E0.04537
G1 X113.412 Y111.880 E0.04998
G1 X113.189 Y111.163 E0.04612
G1 X113.115 Y110.449 E0.04412
G1 X113.126 Y99.260 E0.68781
G1 X113.240 Y98.597 E0.04137
G1 X113.432 Y98.062 E0.03493
; printing object LED_Cover_Remote_LED.stl id:0 copy 0
;WIPE_START
G1 F8640.000
G1 X114.126 Y97.000 E-0.29281
G1 X114.625 Y96.555 E-0.15447
G1 X115.222 Y96.194 E-0.16105
G1 X115.863 Y95.953 E-0.15823
M73 Q22 S3
G1 X116.563 Y95.832 E-0.16386
G1 X116.647 Y95.832 E-0.01958
;WIPE_END
G1 E-0.05000 F2100.000
G1 Z0.700 F10800.000
G1 X116.521 Y99.397
G1 Z0.500
G1 E1.00000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
M73 P22 R3
G1 F2050
G1 X116.613 Y99.281 E0.00488
G1 X116.691 Y99.230 E0.00307
G1 X116.889 Y99.188 E0.00671
G1 X133.183 Y99.193 E0.53857
G1 X133.340 Y99.249 E0.00551
G1 X133.452 Y99.352 E0.00502
G1 X133.498 Y99.457 E0.00379
G1 X133.518 Y99.600 E0.00477
G1 X133.518 Y110.377 E0.35621
G1 X133.496 Y110.535 E0.00526
G1 X133.449 Y110.629 E0.00346
G1 X133.319 Y110.744 E0.00575
G1 X133.111 Y110.789 E0.00705
G1 X116.879 Y110.789 E0.53650
G1 X116.740 Y110.770 E0.00464
G1 X116.642 Y110.720 E0.00362
G1 X116.527 Y110.590 E0.00575
G1 X116.482 Y110.382 E0.00705
G1 X116.482 Y99.586 E0.35685
G1 X116.500 Y99.453 E0.00443
M204 S1000
G1 X116.506 Y98.864 F10800.000
M204 S800
;TYPE:External perimeter
G1 F1500.000
G1 X116.665 Y98.806 E0.00558
G1 X116.864 Y98.781 E0.00663
G1 X133.221 Y98.786 E0.54066
M73 P23 R3
M73 Q23 S3
G1 X133.357 Y98.811 E0.00455
G1 X133.557 Y98.899 E0.00723
G1 X133.725 Y99.039 E0.00723
G1 X133.805 Y99.145 E0.00437
G1 X133.893 Y99.345 E0.00723
G1 X133.925 Y99.572 E0.00758
G1 X133.925 Y110.405 E0.35808
G1 X133.893 Y110.638 E0.00775
G1 X133.843 Y110.766 E0.00455
G1 X133.770 Y110.883 E0.00455
G1 X133.612 Y111.041 E0.00741
G1 X133.497 Y111.112 E0.00446
G1 X133.335 Y111.171 E0.00571
G1 X133.136 Y111.196 E0.00663
G1 X116.860 Y111.196 E0.53796
G1 X116.612 Y111.157 E0.00831
G1 X116.388 Y111.041 E0.00833
G1 X116.230 Y110.883 E0.00741
G1 X116.158 Y110.768 E0.00446
G1 X116.100 Y110.606 E0.00571
G1 X116.075 Y110.407 E0.00663
G1 X116.075 Y99.567 E0.35830
G1 X116.089 Y99.412 E0.00514
G1 X116.156 Y99.212 E0.00695
G1 X116.231 Y99.092 E0.00468
G1 X116.350 Y98.967 E0.00571
G1 X116.456 Y98.897 E0.00421
M204 S1000
G1 X116.647 Y98.957 F10800.000
;WIPE_START
G1 F8640.000
G1 X116.665 Y98.806 E-0.05258
G1 X116.864 Y98.781 E-0.04628
G1 X120.550 Y98.782 E-0.85114
;WIPE_END
G1 E-0.05000 F2100.000
G1 Z0.700 F10800.000
M73 Q24 S3
G1 X133.381 Y99.501
G1 Z0.500
M73 P24 R3
G1 E1.00000 F2100.000
;TYPE:Solid infill
;WIDTH:0.465031
G1 F2050
G1 X116.827 Y99.513 E0.56736
G1 X116.797 Y99.540 E0.00138
G1 X116.787 Y99.606 E0.00231
G1 X116.787 Y99.923 E0.01086
G1 X133.213 Y99.923 E0.56295
G1 X133.213 Y100.345 E0.01447
G1 X116.787 Y100.345 E0.56295
G1 X116.787 Y100.767 E0.01447
G1 X133.213 Y100.767 E0.56295
M73 Q25 S3
G1 X133.213 Y101.190 E0.01447
G1 X116.787 Y101.190 E0.56295
M73 P25 R3
G1 X116.787 Y101.612 E0.01447
G1 X133.213 Y101.612 E0.56295
G1 X133.213 Y102.034 E0.01447
G1 X116.787 Y102.034 E0.56295
G1 X116.787 Y102.456 E0.01447
G1 X133.213 Y102.456 E0.56295
G1 X133.213 Y102.878 E0.01447
M73 Q26 S3
G1 X116.787 Y102.878 E0.56295
M73 P26 R3
G1 X116.787 Y103.300 E0.01447
G1 X133.213 Y103.300 E0.56295
G1 X133.213 Y103.722 E0.01447
G1 X116.787 Y103.722 E0.56295
G1 X116.787 Y104.144 E0.01447
G1 X133.213 Y104.144 E0.56295
G1 X133.213 Y104.566 E0.01447
G1 X116.787 Y104.566 E0.56295
M73 P27 R3
M73 Q27 S3
G1 X116.787 Y104.989 E0.01447
G1 X133.213 Y104.989 E0.56295
G1 X133.213 Y105.411 E0.01447
G1 X116.787 Y105.411 E0.56295
G1 X116.787 Y105.833 E0.01447
G1 X133.213 Y105.833 E0.56295
G1 X133.213 Y106.255 E0.01447
G1 X116.787 Y106.255 E0.56295
M73 Q28 S3
G1 X116.787 Y106.677 E0.01447
G1 X133.213 Y106.677 E0.56295
M73 P28 R3
G1 X133.213 Y107.099 E0.01447
G1 X116.787 Y107.099 E0.56295
G1 X116.787 Y107.521 E0.01447
G1 X133.213 Y107.521 E0.56295
G1 X133.213 Y107.943 E0.01447
G1 X116.787 Y107.943 E0.56295
M73 Q29 S3
G1 X116.787 Y108.365 E0.01447
G1 X133.213 Y108.365 E0.56295
M73 P29 R3
G1 X133.213 Y108.788 E0.01447
G1 X116.787 Y108.788 E0.56295
G1 X116.787 Y109.210 E0.01447
G1 X133.213 Y109.210 E0.56295
G1 X133.213 Y109.632 E0.01447
G1 X116.787 Y109.632 E0.56295
G1 X116.787 Y110.054 E0.01447
G1 X133.213 Y110.054 E0.56295
M73 P30 R3
M73 Q30 S3
G1 X133.213 Y110.356 E0.01035
G1 X133.201 Y110.441 E0.00294
G1 X133.113 Y110.476 E0.00323
G1 X116.627 Y110.476 E0.56503
; stop printing object LED_Cover_Remote_LED.stl id:0 copy 0
;LAYER_CHANGE
;Z:0.7
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;0.7


;WIPE_START
G1 F8640.000
G1 X120.742 Y110.476 E-0.95000
;WIPE_END
G1 E-0.05000 F2100.000
G1 Z0.700 F10800.000
;AFTER_LAYER_CHANGE
;0.7
G1 Z0.900
G1 X114.126 Y97.000
G1 Z0.700
G1 E1.00000 F2100.000
;TYPE:Skirt
;WIDTH:0.8
G1 F2101
G1 X114.625 Y96.555 E0.04112
G1 X115.222 Y96.194 E0.04287
G1 X115.863 Y95.953 E0.04212
G1 X116.563 Y95.832 E0.04362
G1 X130.706 Y95.821 E0.86942
G1 X133.475 Y95.835 E0.17019
G1 X134.125 Y95.950 E0.04062
G1 X134.704 Y96.160 E0.03787
G1 X135.385 Y96.563 E0.04862
G1 X135.954 Y97.089 E0.04762
G1 X136.439 Y97.787 E0.05223
G1 X136.732 Y98.495 E0.04712
G1 X136.885 Y99.524 E0.06395
G1 X136.876 Y110.676 E0.68556
M73 Q31 S3
G1 X136.773 Y111.329 E0.04062
M73 P31 R3
G1 X136.591 Y111.873 E0.03525
G1 X136.295 Y112.436 E0.03912
G1 X135.874 Y112.977 E0.04213
G1 X135.315 Y113.465 E0.04562
G1 X134.605 Y113.861 E0.04999
G1 X133.884 Y114.084 E0.04637
G1 X133.170 Y114.157 E0.04413
G1 X116.611 Y114.148 E1.01792
G1 X115.950 Y114.046 E0.04112
G1 X115.402 Y113.864 E0.03549
G1 X114.835 Y113.566 E0.03937
G1 X114.294 Y113.145 E0.04212
G1 X113.809 Y112.589 E0.04537
G1 X113.412 Y111.880 E0.04998
G1 X113.189 Y111.163 E0.04612
G1 X113.115 Y110.449 E0.04412
G1 X113.126 Y99.260 E0.68781
G1 X113.240 Y98.597 E0.04137
G1 X113.452 Y98.006 E0.03862
G1 X114.092 Y97.050 E0.07068
; printing object LED_Cover_Remote_LED.stl id:0 copy 0
;WIPE_START
G1 F8640.000
G1 X114.625 Y96.555 E-0.16792
G1 X115.222 Y96.194 E-0.16105
G1 X115.863 Y95.953 E-0.15823
G1 X116.563 Y95.832 E-0.16386
G1 X117.857 Y95.831 E-0.29894
;WIPE_END
G1 E-0.05000 F2100.000
G1 Z0.900 F10800.000
G1 X116.658 Y99.246
G1 Z0.700
G1 E1.00000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F2101
G1 X116.831 Y99.193 E0.00600
G1 X133.106 Y99.188 E0.53793
M73 Q32 S3
G1 X133.299 Y99.224 E0.00648
G1 X133.406 Y99.297 E0.00429
G1 X133.477 Y99.393 E0.00395
G1 X133.518 Y99.600 E0.00696
G1 X133.518 Y110.377 E0.35621
M73 P32 R3
G1 X133.496 Y110.535 E0.00526
G1 X133.425 Y110.658 E0.00469
G1 X133.268 Y110.766 E0.00631
G1 X133.121 Y110.789 E0.00492
G1 X116.889 Y110.789 E0.53650
G1 X116.761 Y110.773 E0.00429
G1 X116.642 Y110.720 E0.00428
G1 X116.523 Y110.584 E0.00599
G1 X116.482 Y110.377 E0.00696
G1 X116.482 Y99.600 E0.35621
G1 X116.502 Y99.457 E0.00477
G1 X116.542 Y99.366 E0.00330
G1 X116.611 Y99.283 E0.00355
M204 S1000
G1 X116.443 Y98.898 F10800.000
M204 S800
;TYPE:External perimeter
G1 F1500.000
G1 X116.566 Y98.837 E0.00455
G1 X116.784 Y98.786 E0.00741
G1 X133.134 Y98.781 E0.54043
G1 X133.367 Y98.814 E0.00775
G1 X133.490 Y98.862 E0.00437
G1 X133.675 Y98.988 E0.00741
G1 X133.768 Y99.090 E0.00455
G1 X133.843 Y99.211 E0.00472
G1 X133.893 Y99.340 E0.00455
G1 X133.925 Y99.572 E0.00775
G1 X133.925 Y110.405 E0.35808
M73 Q33 S3
G1 X133.893 Y110.638 E0.00775
G1 X133.844 Y110.763 E0.00443
G1 X133.739 Y110.921 E0.00628
G1 X133.618 Y111.036 E0.00553
G1 X133.425 Y111.144 E0.00732
G1 X133.292 Y111.182 E0.00455
G1 X133.140 Y111.196 E0.00507
G1 X116.864 Y111.196 E0.53796
M73 P33 R3
G1 X116.665 Y111.171 E0.00663
G1 X116.503 Y111.112 E0.00571
G1 X116.388 Y111.041 E0.00446
G1 X116.230 Y110.883 E0.00741
G1 X116.157 Y110.766 E0.00455
G1 X116.107 Y110.638 E0.00455
G1 X116.075 Y110.405 E0.00775
G1 X116.075 Y99.572 E0.35808
G1 X116.107 Y99.345 E0.00758
G1 X116.193 Y99.149 E0.00706
G1 X116.333 Y98.981 E0.00723
G1 X116.395 Y98.934 E0.00256
M204 S1000
G1 X116.565 Y98.961 F10800.000
;WIPE_START
G1 F8640.000
G1 X116.566 Y98.837 E-0.04546
G1 X116.784 Y98.786 E-0.05176
G1 X120.477 Y98.785 E-0.85278
;WIPE_END
G1 E-0.05000 F2100.000
G1 Z0.900 F10800.000
G1 X133.211 Y110.651
G1 Z0.700
G1 E1.00000 F2100.000
;TYPE:Solid infill
;WIDTH:0.453463
G1 F2101
G1 X133.211 Y99.609 E0.36809
G1 X133.185 Y99.520 E0.00308
G1 X133.085 Y99.494 E0.00344
G1 X132.800 Y99.494 E0.00949
G1 X132.800 Y110.484 E0.36634
M73 P34 R3
M73 Q34 S3
G1 X132.390 Y110.484 E0.01369
G1 X132.390 Y99.494 E0.36634
G1 X131.979 Y99.494 E0.01369
G1 X131.979 Y110.484 E0.36633
M73 P34 R2
G1 X131.569 Y110.484 E0.01369
G1 X131.569 Y99.494 E0.36633
M73 Q34 S2
G1 X131.158 Y99.494 E0.01369
G1 X131.158 Y110.484 E0.36632
G1 X130.748 Y110.484 E0.01369
G1 X130.748 Y99.494 E0.36632
G1 X130.337 Y99.494 E0.01369
G1 X130.337 Y110.484 E0.36632
M73 Q35 S2
G1 X129.926 Y110.484 E0.01369
G1 X129.926 Y99.494 E0.36631
M73 P35 R2
G1 X129.516 Y99.495 E0.01369
G1 X129.516 Y110.484 E0.36631
G1 X129.105 Y110.484 E0.01369
G1 X129.105 Y99.495 E0.36631
G1 X128.695 Y99.495 E0.01369
G1 X128.695 Y110.484 E0.36630
G1 X128.284 Y110.484 E0.01369
G1 X128.284 Y99.495 E0.36630
G1 X127.874 Y99.495 E0.01369
G1 X127.874 Y110.484 E0.36630
M73 Q36 S2
G1 X127.463 Y110.484 E0.01369
G1 X127.463 Y99.495 E0.36629
M73 P36 R2
G1 X127.053 Y99.495 E0.01369
G1 X127.053 Y110.484 E0.36629
G1 X126.642 Y110.484 E0.01369
G1 X126.642 Y99.495 E0.36629
G1 X126.232 Y99.495 E0.01369
G1 X126.232 Y110.484 E0.36628
G1 X125.821 Y110.484 E0.01369
G1 X125.821 Y99.496 E0.36628
G1 X125.411 Y99.496 E0.01369
G1 X125.411 Y110.484 E0.36627
G1 X125.000 Y110.484 E0.01369
G1 X125.000 Y99.496 E0.36627
M73 P37 R2
M73 Q37 S2
G1 X124.589 Y99.496 E0.01369
G1 X124.589 Y110.484 E0.36627
G1 X124.179 Y110.484 E0.01369
G1 X124.179 Y99.496 E0.36626
G1 X123.768 Y99.496 E0.01369
G1 X123.768 Y110.484 E0.36626
G1 X123.358 Y110.484 E0.01369
G1 X123.358 Y99.496 E0.36626
G1 X122.947 Y99.496 E0.01369
G1 X122.947 Y110.484 E0.36625
G1 X122.537 Y110.484 E0.01369
G1 X122.537 Y99.496 E0.36625
M73 Q38 S2
G1 X122.126 Y99.497 E0.01369
G1 X122.126 Y110.484 E0.36625
M73 P38 R2
G1 X121.716 Y110.484 E0.01369
G1 X121.716 Y99.497 E0.36624
G1 X121.305 Y99.497 E0.01369
G1 X121.305 Y110.484 E0.36624
G1 X120.895 Y110.484 E0.01369
G1 X120.895 Y99.497 E0.36624
G1 X120.484 Y99.497 E0.01369
G1 X120.484 Y110.484 E0.36623
G1 X120.073 Y110.484 E0.01369
G1 X120.073 Y99.497 E0.36623
M73 Q39 S2
G1 X119.663 Y99.497 E0.01369
G1 X119.663 Y110.484 E0.36623
M73 P39 R2
G1 X119.252 Y110.484 E0.01369
G1 X119.252 Y99.497 E0.36622
G1 X118.842 Y99.497 E0.01369
G1 X118.842 Y110.484 E0.36622
G1 X118.431 Y110.484 E0.01369
G1 X118.431 Y99.497 E0.36621
G1 X118.021 Y99.498 E0.01369
G1 X118.021 Y110.484 E0.36621
G1 X117.610 Y110.484 E0.01369
G1 X117.610 Y99.498 E0.36621
M73 Q40 S2
G1 X117.200 Y99.498 E0.01369
G1 X117.200 Y110.484 E0.36620
M73 P40 R2
G1 X116.922 Y110.484 E0.00926
G1 X116.824 Y110.462 E0.00335
G1 X116.799 Y110.441 E0.00109
G1 X116.789 Y110.368 E0.00244
G1 X116.789 Y99.333 E0.36785
; stop printing object LED_Cover_Remote_LED.stl id:0 copy 0
M106 S76.5
;LAYER_CHANGE
;Z:0.9
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;0.9


;WIPE_START
G1 F8640.000
G1 X116.789 Y103.448 E-0.95000
;WIPE_END
G1 E-0.05000 F2100.000
G1 Z0.900 F10800.000
;AFTER_LAYER_CHANGE
;0.9
; printing object LED_Cover_Remote_LED.stl id:0 copy 0
G1 Z1.100
G1 X116.591 Y99.300
G1 Z0.900
G1 E1.00000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F1766
G1 X116.724 Y99.215 E0.00522
G1 X116.898 Y99.188 E0.00581
G1 X133.121 Y99.188 E0.53623
G1 X133.217 Y99.197 E0.00320
G1 X133.342 Y99.246 E0.00444
G1 X133.477 Y99.394 E0.00661
G1 X133.514 Y99.523 E0.00444
G1 X133.518 Y110.377 E0.35878
G1 X133.496 Y110.535 E0.00525
G1 X133.449 Y110.629 E0.00346
G1 X133.368 Y110.710 E0.00379
G1 X133.268 Y110.766 E0.00379
G1 X133.121 Y110.789 E0.00492
G1 X116.894 Y110.789 E0.53635
M73 P41 R2
M73 Q41 S2
G1 X116.736 Y110.767 E0.00526
G1 X116.642 Y110.720 E0.00346
G1 X116.522 Y110.582 E0.00605
G1 X116.482 Y110.373 E0.00703
G1 X116.482 Y99.598 E0.35616
G1 X116.501 Y99.455 E0.00478
G1 X116.557 Y99.350 E0.00393
M204 S1000
G1 X116.505 Y98.863 F10800.000
M204 S800
;TYPE:External perimeter
G1 F1500.000
G1 X116.618 Y98.819 E0.00398
G1 X116.867 Y98.781 E0.00834
G1 X133.140 Y98.781 E0.53786
G1 X133.292 Y98.795 E0.00507
G1 X133.430 Y98.835 E0.00472
G1 X133.557 Y98.898 E0.00472
G1 X133.671 Y98.984 E0.00472
G1 X133.768 Y99.090 E0.00472
G1 X133.843 Y99.211 E0.00472
G1 X133.894 Y99.344 E0.00472
G1 X133.921 Y99.485 E0.00472
G1 X133.925 Y110.405 E0.36096
G1 X133.893 Y110.638 E0.00775
G1 X133.843 Y110.766 E0.00455
G1 X133.770 Y110.883 E0.00455
G1 X133.616 Y111.038 E0.00723
G1 X133.425 Y111.144 E0.00723
G1 X133.292 Y111.182 E0.00455
G1 X133.140 Y111.196 E0.00507
G1 X116.866 Y111.196 E0.53791
M73 P42 R2
M73 Q42 S2
G1 X116.633 Y111.164 E0.00775
G1 X116.505 Y111.114 E0.00455
G1 X116.388 Y111.041 E0.00455
G1 X116.230 Y110.883 E0.00741
G1 X116.157 Y110.766 E0.00457
G1 X116.113 Y110.653 E0.00398
G1 X116.075 Y110.404 E0.00834
G1 X116.075 Y99.571 E0.35806
G1 X116.104 Y99.355 E0.00719
G1 X116.156 Y99.215 E0.00495
G1 X116.282 Y99.031 E0.00736
G1 X116.454 Y98.895 E0.00728
M204 S1000
G1 X116.609 Y98.924 F10800.000
;WIPE_START
G1 F8640.000
G1 X116.618 Y98.819 E-0.04151
G1 X116.867 Y98.781 E-0.05823
G1 X120.549 Y98.781 E-0.85025
;WIPE_END
G1 E-0.05000 F2100.000
G1 Z1.100 F10800.000
G1 X133.381 Y99.501
G1 Z0.900
G1 E1.00000 F2100.000
;TYPE:Solid infill
;WIDTH:0.465031
G1 F1766
G1 X116.827 Y99.508 E0.56735
G1 X116.787 Y99.628 E0.00433
G1 X116.787 Y99.923 E0.01013
G1 X133.209 Y99.923 E0.56281
M73 P43 R2
M73 Q43 S2
G1 X133.209 Y100.345 E0.01447
G1 X116.787 Y100.345 E0.56282
G1 X116.787 Y100.767 E0.01447
G1 X133.209 Y100.767 E0.56282
G1 X133.209 Y101.190 E0.01447
G1 X116.787 Y101.190 E0.56283
G1 X116.787 Y101.612 E0.01447
G1 X133.209 Y101.612 E0.56283
M73 P44 R2
M73 Q44 S2
G1 X133.209 Y102.034 E0.01447
G1 X116.787 Y102.034 E0.56284
G1 X116.787 Y102.456 E0.01447
G1 X133.210 Y102.456 E0.56284
G1 X133.210 Y102.878 E0.01447
G1 X116.787 Y102.878 E0.56285
M73 Q45 S2
G1 X116.787 Y103.300 E0.01447
G1 X133.210 Y103.300 E0.56286
M73 P45 R2
G1 X133.210 Y103.722 E0.01447
G1 X116.787 Y103.722 E0.56286
G1 X116.787 Y104.144 E0.01447
G1 X133.210 Y104.144 E0.56287
G1 X133.210 Y104.566 E0.01447
G1 X116.787 Y104.566 E0.56287
M73 Q46 S2
G1 X116.787 Y104.989 E0.01447
G1 X133.210 Y104.989 E0.56288
M73 P46 R2
G1 X133.211 Y105.411 E0.01447
G1 X116.787 Y105.411 E0.56288
G1 X116.787 Y105.833 E0.01447
G1 X133.211 Y105.833 E0.56289
G1 X133.211 Y106.255 E0.01447
G1 X116.787 Y106.255 E0.56290
M73 P47 R2
M73 Q47 S2
G1 X116.787 Y106.677 E0.01447
G1 X133.211 Y106.677 E0.56290
G1 X133.211 Y107.099 E0.01447
G1 X116.787 Y107.099 E0.56291
G1 X116.787 Y107.521 E0.01447
G1 X133.211 Y107.521 E0.56291
G1 X133.212 Y107.943 E0.01447
G1 X116.787 Y107.943 E0.56292
M73 P48 R2
M73 Q48 S2
G1 X116.787 Y108.365 E0.01447
G1 X133.212 Y108.365 E0.56292
G1 X133.212 Y108.788 E0.01447
G1 X116.787 Y108.788 E0.56293
G1 X116.787 Y109.210 E0.01447
G1 X133.212 Y109.210 E0.56294
G1 X133.212 Y109.632 E0.01447
G1 X116.787 Y109.632 E0.56294
M73 P49 R2
M73 Q49 S2
G1 X116.787 Y110.054 E0.01447
G1 X133.212 Y110.054 E0.56295
G1 X133.213 Y110.347 E0.01006
G1 X133.193 Y110.445 E0.00342
G1 X133.144 Y110.476 E0.00198
G1 X116.621 Y110.476 E0.56631
; stop printing object LED_Cover_Remote_LED.stl id:0 copy 0
;LAYER_CHANGE
;Z:1.1
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;1.1


;WIPE_START
G1 F8640.000
G1 X120.735 Y110.476 E-0.95000
;WIPE_END
G1 E-0.05000 F2100.000
G1 Z1.100 F10800.000
;AFTER_LAYER_CHANGE
;1.1
; printing object LED_Cover_Remote_LED.stl id:0 copy 0
G1 Z1.300
G1 X116.591 Y99.300
G1 Z1.100
G1 E1.00000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F2055
G1 X116.736 Y99.210 E0.00565
G1 X116.894 Y99.188 E0.00526
G1 X133.121 Y99.188 E0.53635
M73 P50 R2
M73 Q50 S2
G1 X133.217 Y99.197 E0.00320
G1 X133.342 Y99.246 E0.00444
G1 X133.477 Y99.394 E0.00661
G1 X133.514 Y99.523 E0.00444
G1 X133.518 Y110.377 E0.35878
G1 X133.496 Y110.535 E0.00525
G1 X133.449 Y110.629 E0.00346
G1 X133.388 Y110.690 E0.00285
G1 X133.178 Y110.784 E0.00761
G1 X133.121 Y110.789 E0.00190
G1 X116.894 Y110.789 E0.53635
G1 X116.736 Y110.767 E0.00526
G1 X116.642 Y110.720 E0.00346
G1 X116.523 Y110.584 E0.00599
G1 X116.482 Y110.377 E0.00696
G1 X116.482 Y99.600 E0.35621
G1 X116.504 Y99.443 E0.00526
G1 X116.557 Y99.350 E0.00353
M204 S1000
G1 X116.505 Y98.863 F10800.000
M204 S800
;TYPE:External perimeter
G1 F1500.000
G1 X116.633 Y98.814 E0.00455
G1 X116.866 Y98.781 E0.00775
G1 X133.140 Y98.781 E0.53791
M73 Q51 S2
G1 X133.292 Y98.795 E0.00507
G1 X133.430 Y98.835 E0.00472
G1 X133.557 Y98.898 E0.00472
G1 X133.671 Y98.984 E0.00472
G1 X133.768 Y99.090 E0.00472
G1 X133.843 Y99.211 E0.00472
G1 X133.894 Y99.344 E0.00472
G1 X133.921 Y99.485 E0.00472
G1 X133.925 Y110.405 E0.36096
M73 P51 R2
G1 X133.893 Y110.638 E0.00775
G1 X133.843 Y110.766 E0.00455
G1 X133.770 Y110.883 E0.00455
G1 X133.623 Y111.031 E0.00690
G1 X133.356 Y111.150 E0.00967
G1 X133.361 Y111.164 E0.00049
G1 X133.140 Y111.196 E0.00740
G1 X116.866 Y111.196 E0.53791
G1 X116.633 Y111.164 E0.00775
G1 X116.505 Y111.114 E0.00455
G1 X116.388 Y111.041 E0.00455
G1 X116.230 Y110.883 E0.00741
G1 X116.157 Y110.766 E0.00455
G1 X116.107 Y110.638 E0.00455
G1 X116.075 Y110.405 E0.00775
G1 X116.075 Y99.572 E0.35808
G1 X116.107 Y99.340 E0.00775
G1 X116.155 Y99.216 E0.00437
G1 X116.282 Y99.031 E0.00741
G1 X116.454 Y98.895 E0.00726
M204 S1000
G1 X116.623 Y98.934 F10800.000
;WIPE_START
G1 F8640.000
G1 X116.633 Y98.814 E-0.04546
G1 X116.866 Y98.781 E-0.05417
G1 X120.548 Y98.781 E-0.85037
;WIPE_END
G1 E-0.05000 F2100.000
G1 Z1.300 F10800.000
G1 X120.762 Y102.604
G1 Z1.100
G1 E1.00000 F2100.000
;TYPE:Solid infill
;WIDTH:0.46673
G1 F2055
G1 X120.762 Y106.344 E0.12871
M73 Q52 S2
G1 X121.186 Y106.344 E0.01458
G1 X121.186 Y102.787 E0.12240
G1 X121.609 Y102.787 E0.01458
M73 P52 R2
G1 X121.609 Y106.344 E0.12240
G1 X122.033 Y106.344 E0.01458
G1 X122.033 Y102.787 E0.12240
G1 X122.457 Y102.787 E0.01458
G1 X122.457 Y106.344 E0.12240
G1 X122.881 Y106.344 E0.01458
G1 X122.881 Y102.787 E0.12240
G1 X123.305 Y102.787 E0.01458
G1 X123.305 Y106.344 E0.12240
G1 X123.729 Y106.344 E0.01458
G1 X123.729 Y102.787 E0.12240
G1 X124.152 Y102.787 E0.01458
G1 X124.152 Y106.344 E0.12240
G1 X124.576 Y106.344 E0.01458
G1 X124.576 Y102.787 E0.12240
G1 X125.000 Y102.787 E0.01458
G1 X125.000 Y106.344 E0.12240
G1 X125.424 Y106.344 E0.01458
G1 X125.424 Y102.787 E0.12240
G1 X125.848 Y102.787 E0.01458
G1 X125.848 Y106.344 E0.12240
G1 X126.271 Y106.344 E0.01458
G1 X126.271 Y102.787 E0.12240
G1 X126.695 Y102.787 E0.01458
G1 X126.695 Y106.344 E0.12240
G1 X127.119 Y106.344 E0.01458
G1 X127.119 Y102.787 E0.12240
M73 Q53 S2
G1 X127.543 Y102.787 E0.01458
G1 X127.543 Y106.344 E0.12240
G1 X127.967 Y106.344 E0.01458
M73 P53 R2
G1 X127.967 Y102.787 E0.12240
G1 X128.390 Y102.787 E0.01458
G1 X128.390 Y106.344 E0.12240
G1 X128.814 Y106.344 E0.01458
G1 X128.814 Y102.787 E0.12240
G1 X129.238 Y102.787 E0.01458
G1 X129.238 Y106.528 E0.12871
;WIPE_START
G1 F8640.000
G1 X129.238 Y102.787 E-0.86362
G1 X128.864 Y102.787 E-0.08638
;WIPE_END
G1 E-0.05000 F2100.000
G1 Z1.300 F10800.000
G1 X133.237 Y99.329
G1 Z1.100
G1 E1.00000 F2100.000
;TYPE:Top solid infill
;WIDTH:0.401054
G1 F2055
G1 X133.237 Y110.353 E0.32054
G1 X133.215 Y110.460 E0.00319
G1 X133.106 Y110.509 E0.00346
G1 X132.879 Y110.509 E0.00661
G1 X132.879 Y99.469 E0.32103
G1 X132.521 Y99.469 E0.01041
G1 X132.521 Y110.509 E0.32103
M73 Q54 S2
G1 X132.163 Y110.509 E0.01041
G1 X132.163 Y99.469 E0.32103
M73 P54 R2
G1 X131.804 Y99.469 E0.01041
G1 X131.804 Y110.509 E0.32103
G1 X131.446 Y110.509 E0.01041
G1 X131.446 Y99.469 E0.32103
G1 X131.088 Y99.469 E0.01041
G1 X131.088 Y110.509 E0.32103
G1 X130.730 Y110.509 E0.01041
G1 X130.730 Y99.469 E0.32103
G1 X130.372 Y99.469 E0.01041
G1 X130.372 Y110.509 E0.32103
G1 X130.014 Y110.509 E0.01041
G1 X130.014 Y99.469 E0.32103
M73 P55 R2
M73 Q55 S2
G1 X129.656 Y99.469 E0.01041
G1 X129.656 Y110.509 E0.32103
G1 X129.298 Y110.509 E0.01041
G1 X129.298 Y106.726 E0.10998
G1 X129.629 Y106.726 E0.00963
G1 X129.629 Y102.405 E0.12565
G1 X129.298 Y102.405 E0.00963
G1 X129.298 Y99.469 E0.08539
G1 X128.939 Y99.469 E0.01041
G1 X128.939 Y102.405 E0.08539
G1 X128.581 Y102.405 E0.01041
G1 X128.581 Y99.469 E0.08539
G1 X128.223 Y99.469 E0.01041
G1 X128.223 Y102.405 E0.08539
G1 X127.865 Y102.405 E0.01041
G1 X127.865 Y99.469 E0.08539
G1 X127.507 Y99.469 E0.01041
G1 X127.507 Y102.405 E0.08539
G1 X127.149 Y102.405 E0.01041
G1 X127.149 Y99.469 E0.08539
G1 X126.791 Y99.469 E0.01041
G1 X126.791 Y102.405 E0.08539
G1 X126.432 Y102.405 E0.01041
G1 X126.432 Y99.469 E0.08539
G1 X126.074 Y99.469 E0.01041
G1 X126.074 Y102.405 E0.08539
M73 Q56 S2
G1 X125.716 Y102.405 E0.01041
G1 X125.716 Y99.469 E0.08539
G1 X125.358 Y99.469 E0.01041
G1 X125.358 Y102.405 E0.08539
M73 P56 R2
G1 X125.000 Y102.405 E0.01041
G1 X125.000 Y99.469 E0.08539
G1 X124.642 Y99.469 E0.01041
G1 X124.642 Y102.405 E0.08539
G1 X124.284 Y102.405 E0.01041
G1 X124.284 Y99.469 E0.08539
G1 X123.926 Y99.469 E0.01041
G1 X123.926 Y102.405 E0.08539
G1 X123.567 Y102.405 E0.01041
G1 X123.567 Y99.469 E0.08539
G1 X123.209 Y99.469 E0.01041
G1 X123.209 Y102.405 E0.08539
G1 X122.851 Y102.405 E0.01041
G1 X122.851 Y99.469 E0.08539
G1 X122.493 Y99.469 E0.01041
G1 X122.493 Y102.405 E0.08539
G1 X122.135 Y102.405 E0.01041
G1 X122.135 Y99.469 E0.08539
G1 X121.777 Y99.469 E0.01041
G1 X121.777 Y102.405 E0.08539
G1 X121.419 Y102.405 E0.01041
G1 X121.419 Y99.469 E0.08539
G1 X121.060 Y99.469 E0.01041
G1 X121.060 Y102.566 E0.09007
;WIPE_START
G1 F8640.000
G1 X121.060 Y99.469 E-0.71517
G1 X121.419 Y99.469 E-0.08269
G1 X121.419 Y100.128 E-0.15213
;WIPE_END
G1 E-0.05000 F2100.000
G1 Z1.300 F10800.000
G1 X128.939 Y106.566
M73 Q57 S2
G1 Z1.100
G1 E1.00000 F2100.000
G1 F2055
G1 X128.939 Y110.509 E0.11465
M73 P57 R2
G1 X128.581 Y110.509 E0.01041
G1 X128.581 Y106.726 E0.10998
G1 X128.223 Y106.726 E0.01041
G1 X128.223 Y110.509 E0.10998
G1 X127.865 Y110.509 E0.01041
G1 X127.865 Y106.726 E0.10998
G1 X127.507 Y106.726 E0.01041
G1 X127.507 Y110.509 E0.10998
G1 X127.149 Y110.509 E0.01041
G1 X127.149 Y106.726 E0.10998
G1 X126.791 Y106.726 E0.01041
G1 X126.791 Y110.509 E0.10998
G1 X126.432 Y110.509 E0.01041
G1 X126.432 Y106.726 E0.10998
G1 X126.074 Y106.726 E0.01041
G1 X126.074 Y110.509 E0.10998
G1 X125.716 Y110.509 E0.01041
G1 X125.716 Y106.726 E0.10998
G1 X125.358 Y106.726 E0.01041
G1 X125.358 Y110.509 E0.10998
G1 X125.000 Y110.509 E0.01041
G1 X125.000 Y106.726 E0.10998
G1 X124.642 Y106.726 E0.01041
G1 X124.642 Y110.509 E0.10998
G1 X124.284 Y110.509 E0.01041
G1 X124.284 Y106.726 E0.10998
M73 Q58 S2
G1 X123.926 Y106.726 E0.01041
G1 X123.926 Y110.509 E0.10998
G1 X123.567 Y110.509 E0.01041
G1 X123.567 Y106.726 E0.10998
M73 P58 R2
G1 X123.209 Y106.726 E0.01041
G1 X123.209 Y110.509 E0.10998
G1 X122.851 Y110.509 E0.01041
G1 X122.851 Y106.726 E0.10998
G1 X122.493 Y106.726 E0.01041
G1 X122.493 Y110.509 E0.10998
G1 X122.135 Y110.509 E0.01041
G1 X122.135 Y106.726 E0.10998
G1 X121.777 Y106.726 E0.01041
G1 X121.777 Y110.509 E0.10998
G1 X121.419 Y110.509 E0.01041
G1 X121.419 Y106.726 E0.10998
G1 X121.060 Y106.726 E0.01041
G1 X121.060 Y110.509 E0.10998
G1 X120.702 Y110.509 E0.01041
G1 X120.702 Y106.726 E0.10998
G1 X120.371 Y106.726 E0.00962
G1 X120.371 Y102.405 E0.12565
G1 X120.702 Y102.405 E0.00962
G1 X120.702 Y99.469 E0.08539
G1 X120.344 Y99.469 E0.01041
G1 X120.344 Y110.509 E0.32103
G1 X119.986 Y110.509 E0.01041
M73 Q59 S2
G1 X119.986 Y99.469 E0.32103
M73 P59 R2
G1 X119.628 Y99.469 E0.01041
G1 X119.628 Y110.509 E0.32103
G1 X119.270 Y110.509 E0.01041
G1 X119.270 Y99.469 E0.32103
G1 X118.912 Y99.469 E0.01041
G1 X118.912 Y110.509 E0.32103
G1 X118.554 Y110.509 E0.01041
G1 X118.554 Y99.469 E0.32103
G1 X118.195 Y99.469 E0.01041
G1 X118.195 Y110.509 E0.32103
G1 X117.837 Y110.509 E0.01041
G1 X117.837 Y99.469 E0.32103
M73 P60 R2
M73 Q60 S2
G1 X117.479 Y99.469 E0.01041
G1 X117.479 Y110.509 E0.32103
G1 X117.121 Y110.509 E0.01041
G1 X117.121 Y99.469 E0.32103
G1 X116.822 Y99.481 E0.00870
G1 X116.781 Y99.526 E0.00177
G1 X116.763 Y99.623 E0.00287
G1 X116.763 Y110.641 E0.32038
; stop printing object LED_Cover_Remote_LED.stl id:0 copy 0
;LAYER_CHANGE
;Z:1.3
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;1.3


;WIPE_START
G1 F8640.000
G1 X116.763 Y106.527 E-0.95000
;WIPE_END
M73 P60 R1
G1 E-0.05000 F2100.000
G1 Z1.300 F10800.000
;AFTER_LAYER_CHANGE
;1.3
; printing object LED_Cover_Remote_LED.stl id:0 copy 0
G1 Z1.500
M73 Q60 S1
G1 X118.182 Y100.216
G1 Z1.300
G1 E1.00000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F1102
G1 X131.818 Y100.216 E0.45071
M73 P61 R1
M73 Q61 S1
G1 X131.818 Y108.916 E0.28756
G1 X118.182 Y108.916 E0.45071
G1 X118.182 Y100.276 E0.28558
M204 S1000
G1 X117.775 Y99.809 F10800.000
M204 S800
;TYPE:External perimeter
G1 F1102
G1 X132.225 Y99.809 E0.47762
M73 P62 R1
M73 Q62 S1
G1 X132.225 Y109.323 E0.31447
G1 X117.775 Y109.323 E0.47762
G1 X117.775 Y99.869 E0.31249
M204 S1000
M73 Q63 S1
G1 X118.167 Y99.886 F10800.000
;WIPE_START
G1 F8640.000
G1 X121.889 Y99.852 E-0.95000
;WIPE_END
M73 P63 R1
G1 E-0.05000 F2100.000
G1 Z1.500 F10800.000
G1 X118.304 Y108.602
G1 Z1.300
G1 E1.00000 F2100.000
;TYPE:Solid infill
;WIDTH:0.467737
G1 F1102
G1 X131.513 Y108.602 E0.45560
G1 X131.513 Y108.177 E0.01465
G1 X118.487 Y108.177 E0.44928
G1 X118.487 Y107.752 E0.01465
G1 X131.513 Y107.752 E0.44928
M73 P64 R1
M73 Q64 S1
G1 X131.513 Y107.327 E0.01465
G1 X118.487 Y107.327 E0.44928
G1 X118.487 Y106.902 E0.01465
G1 X131.513 Y106.902 E0.44928
G1 X131.513 Y106.477 E0.01465
G1 X118.487 Y106.477 E0.44928
M73 P65 R1
M73 Q65 S1
G1 X118.487 Y106.053 E0.01465
G1 X131.513 Y106.053 E0.44928
G1 X131.513 Y105.628 E0.01465
G1 X118.487 Y105.628 E0.44928
G1 X118.487 Y105.203 E0.01465
G1 X131.513 Y105.203 E0.44928
M73 P66 R1
M73 Q66 S1
G1 X131.513 Y104.778 E0.01465
G1 X118.487 Y104.778 E0.44928
G1 X118.487 Y104.353 E0.01465
G1 X131.513 Y104.353 E0.44928
G1 X131.513 Y103.929 E0.01465
G1 X118.487 Y103.929 E0.44928
M73 P67 R1
M73 Q67 S1
G1 X118.487 Y103.504 E0.01465
G1 X131.513 Y103.504 E0.44928
G1 X131.513 Y103.079 E0.01465
G1 X118.487 Y103.079 E0.44928
G1 X118.487 Y102.654 E0.01465
G1 X131.513 Y102.654 E0.44928
M73 P68 R1
M73 Q68 S1
G1 X131.513 Y102.229 E0.01465
G1 X118.487 Y102.229 E0.44928
G1 X118.487 Y101.805 E0.01465
G1 X131.513 Y101.805 E0.44928
G1 X131.513 Y101.380 E0.01465
G1 X118.487 Y101.380 E0.44928
M73 P69 R1
M73 Q69 S1
G1 X118.487 Y100.955 E0.01465
G1 X131.513 Y100.955 E0.44928
G1 X131.513 Y100.530 E0.01465
G1 X118.304 Y100.530 E0.45560
; stop printing object LED_Cover_Remote_LED.stl id:0 copy 0
;LAYER_CHANGE
;Z:1.5
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;1.5


;WIPE_START
G1 F8640.000
G1 X122.418 Y100.530 E-0.95000
;WIPE_END
G1 E-0.05000 F2100.000
G1 Z1.500 F10800.000
;AFTER_LAYER_CHANGE
;1.5
; printing object LED_Cover_Remote_LED.stl id:0 copy 0
G1 Z1.700
G1 X118.182 Y100.193
G1 Z1.500
G1 E1.00000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F1112
G1 X131.818 Y100.193 E0.45071
M73 P70 R1
M73 Q70 S1
G1 X131.818 Y108.893 E0.28756
G1 X118.182 Y108.893 E0.45071
G1 X118.182 Y100.253 E0.28558
M204 S1000
M73 Q71 S1
G1 X117.775 Y99.809 F10800.000
M204 S800
;TYPE:External perimeter
G1 F1112
G1 X117.775 Y99.786 E0.00075
G1 X132.225 Y99.786 E0.47762
M73 P71 R1
G1 X132.225 Y109.300 E0.31447
G1 X117.775 Y109.300 E0.47762
G1 X117.775 Y99.869 E0.31173
M204 S1000
M73 P72 R1
M73 Q72 S1
G1 X117.790 Y99.792 F10800.000
;WIPE_START
G1 F8640.000
G1 X117.775 Y99.786 E-0.01912
G1 X121.807 Y99.786 E-0.93088
;WIPE_END
G1 E-0.05000 F2100.000
G1 Z1.700 F10800.000
G1 X131.506 Y108.771
G1 Z1.500
G1 E1.00000 F2100.000
;TYPE:Solid infill
;WIDTH:0.462679
G1 F1112
G1 X131.506 Y100.498 E0.28195
G1 X131.086 Y100.498 E0.01431
G1 X131.086 Y108.588 E0.27570
G1 X130.667 Y108.588 E0.01431
G1 X130.667 Y100.498 E0.27570
M73 Q73 S1
G1 X130.247 Y100.498 E0.01431
G1 X130.247 Y108.588 E0.27570
M73 P73 R1
G1 X129.827 Y108.588 E0.01431
G1 X129.827 Y100.498 E0.27570
G1 X129.407 Y100.498 E0.01431
G1 X129.407 Y108.588 E0.27570
G1 X128.988 Y108.588 E0.01431
G1 X128.988 Y100.498 E0.27570
G1 X128.568 Y100.498 E0.01431
G1 X128.568 Y108.588 E0.27570
M73 Q74 S1
G1 X128.148 Y108.588 E0.01431
G1 X128.148 Y100.498 E0.27570
M73 P74 R1
G1 X127.728 Y100.498 E0.01431
G1 X127.728 Y108.588 E0.27570
G1 X127.309 Y108.588 E0.01431
G1 X127.309 Y100.498 E0.27570
G1 X126.889 Y100.498 E0.01431
G1 X126.889 Y108.588 E0.27570
G1 X126.469 Y108.588 E0.01431
G1 X126.469 Y100.498 E0.27570
M73 P75 R1
M73 Q75 S1
G1 X126.049 Y100.498 E0.01431
G1 X126.049 Y108.588 E0.27570
G1 X125.630 Y108.588 E0.01431
G1 X125.630 Y100.498 E0.27570
G1 X125.210 Y100.498 E0.01431
G1 X125.210 Y108.588 E0.27570
G1 X124.790 Y108.588 E0.01431
G1 X124.790 Y100.498 E0.27570
G1 X124.370 Y100.498 E0.01431
G1 X124.370 Y108.588 E0.27570
M73 P76 R1
M73 Q76 S1
G1 X123.951 Y108.588 E0.01431
G1 X123.951 Y100.498 E0.27570
G1 X123.531 Y100.498 E0.01431
G1 X123.531 Y108.588 E0.27570
G1 X123.111 Y108.588 E0.01431
G1 X123.111 Y100.498 E0.27570
G1 X122.691 Y100.498 E0.01431
G1 X122.691 Y108.588 E0.27570
G1 X122.272 Y108.588 E0.01431
G1 X122.272 Y100.498 E0.27570
M73 P77 R1
M73 Q77 S1
G1 X121.852 Y100.498 E0.01431
G1 X121.852 Y108.588 E0.27570
G1 X121.432 Y108.588 E0.01431
G1 X121.432 Y100.498 E0.27570
G1 X121.012 Y100.498 E0.01431
G1 X121.012 Y108.588 E0.27570
G1 X120.592 Y108.588 E0.01431
G1 X120.592 Y100.498 E0.27570
G1 X120.173 Y100.498 E0.01431
G1 X120.173 Y108.588 E0.27570
M73 P78 R1
M73 Q78 S1
G1 X119.753 Y108.588 E0.01431
G1 X119.753 Y100.498 E0.27570
G1 X119.333 Y100.498 E0.01431
G1 X119.333 Y108.588 E0.27570
G1 X118.913 Y108.588 E0.01431
G1 X118.913 Y100.498 E0.27570
G1 X118.494 Y100.498 E0.01431
G1 X118.494 Y108.771 E0.28195
; stop printing object LED_Cover_Remote_LED.stl id:0 copy 0
;LAYER_CHANGE
;Z:1.7
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;1.7


;WIPE_START
G1 F8640.000
G1 X118.494 Y104.657 E-0.95000
;WIPE_END
M73 Q79 S1
G1 E-0.05000 F2100.000
G1 Z1.700 F10800.000
;AFTER_LAYER_CHANGE
;1.7
; printing object LED_Cover_Remote_LED.stl id:0 copy 0
M73 P79 R1
G1 Z1.900
G1 X118.182 Y100.170
G1 Z1.700
G1 E1.00000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F1101
G1 X131.818 Y100.170 E0.45071
G1 X131.818 Y108.870 E0.28756
G1 X118.182 Y108.870 E0.45071
M73 P80 R1
M73 Q80 S1
G1 X118.182 Y100.230 E0.28558
M204 S1000
G1 X117.775 Y99.809 F10800.000
M204 S800
;TYPE:External perimeter
G1 F1101
G1 X117.775 Y99.763 E0.00151
G1 X132.225 Y99.763 E0.47762
G1 X132.225 Y109.277 E0.31447
G1 X117.775 Y109.277 E0.47762
M73 P81 R1
M73 Q81 S1
G1 X117.775 Y99.869 E0.31098
M204 S1000
G1 X117.805 Y99.774 F10800.000
;WIPE_START
G1 F8640.000
G1 X117.775 Y99.763 E-0.02438
G1 X121.784 Y99.763 E-0.92562
;WIPE_END
G1 E-0.05000 F2100.000
G1 Z1.900 F10800.000
G1 X118.304 Y108.556
G1 Z1.700
G1 E1.00000 F2100.000
;TYPE:Solid infill
;WIDTH:0.467737
G1 F1101
G1 X131.513 Y108.556 E0.45560
G1 X131.513 Y108.131 E0.01465
G1 X118.487 Y108.131 E0.44928
M73 P82 R1
M73 Q82 S1
G1 X118.487 Y107.706 E0.01465
G1 X131.513 Y107.706 E0.44928
G1 X131.513 Y107.282 E0.01465
G1 X118.487 Y107.282 E0.44928
G1 X118.487 Y106.857 E0.01465
G1 X131.513 Y106.857 E0.44928
M73 P83 R1
M73 Q83 S1
G1 X131.513 Y106.432 E0.01465
G1 X118.487 Y106.432 E0.44928
G1 X118.487 Y106.007 E0.01465
G1 X131.513 Y106.007 E0.44928
G1 X131.513 Y105.582 E0.01465
G1 X118.487 Y105.582 E0.44928
M73 P84 R1
M73 Q84 S1
G1 X118.487 Y105.157 E0.01465
G1 X131.513 Y105.157 E0.44928
G1 X131.513 Y104.733 E0.01465
G1 X118.487 Y104.733 E0.44928
G1 X118.487 Y104.308 E0.01465
G1 X131.513 Y104.308 E0.44928
M73 P85 R1
M73 Q85 S1
G1 X131.513 Y103.883 E0.01465
G1 X118.487 Y103.883 E0.44928
G1 X118.487 Y103.458 E0.01465
G1 X131.513 Y103.458 E0.44928
G1 X131.513 Y103.033 E0.01465
G1 X118.487 Y103.033 E0.44928
M73 P86 R1
M73 Q86 S1
G1 X118.487 Y102.609 E0.01465
G1 X131.513 Y102.609 E0.44928
G1 X131.513 Y102.184 E0.01465
G1 X118.487 Y102.184 E0.44928
G1 X118.487 Y101.759 E0.01465
G1 X131.513 Y101.759 E0.44928
M73 P87 R0
M73 Q87 S0
G1 X131.513 Y101.334 E0.01465
G1 X118.487 Y101.334 E0.44928
G1 X118.487 Y100.909 E0.01465
G1 X131.513 Y100.909 E0.44928
G1 X131.513 Y100.484 E0.01465
G1 X118.304 Y100.484 E0.45560
; stop printing object LED_Cover_Remote_LED.stl id:0 copy 0
;LAYER_CHANGE
;Z:1.9
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;1.9


;WIPE_START
M73 P88 R0
M73 Q88 S0
G1 F8640.000
G1 X122.418 Y100.484 E-0.95000
;WIPE_END
G1 E-0.05000 F2100.000
G1 Z1.900 F10800.000
;AFTER_LAYER_CHANGE
;1.9
; printing object LED_Cover_Remote_LED.stl id:0 copy 0
G1 Z2.100
G1 X118.182 Y100.148
G1 Z1.900
G1 E1.00000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F1239
G1 X131.818 Y100.148 E0.45071
G1 X131.818 Y108.847 E0.28756
G1 X118.182 Y108.847 E0.45071
M73 P89 R0
M73 Q89 S0
G1 X118.182 Y100.208 E0.28558
M204 S1000
G1 X117.775 Y99.809 F10800.000
M204 S800
;TYPE:External perimeter
G1 F1239
G1 X117.775 Y99.740 E0.00226
G1 X132.225 Y99.740 E0.47762
G1 X132.225 Y109.255 E0.31447
G1 X117.775 Y109.255 E0.47762
M73 P90 R0
M73 Q90 S0
G1 X117.775 Y99.869 E0.31023
M204 S1000
G1 X117.820 Y99.757 F10800.000
;WIPE_START
G1 F8640.000
G1 X117.775 Y99.740 E-0.02964
G1 X121.761 Y99.740 E-0.92036
;WIPE_END
G1 E-0.05000 F2100.000
G1 Z2.100 F10800.000
G1 X131.535 Y100.267
G1 Z1.900
G1 E1.00000 F2100.000
;TYPE:Top solid infill
;WIDTH:0.405955
G1 F1239
G1 X131.535 Y108.567 E0.24466
G1 X131.172 Y108.567 E0.01070
G1 X131.172 Y100.428 E0.23992
G1 X130.809 Y100.428 E0.01070
G1 X130.809 Y108.567 E0.23992
M73 P91 R0
M73 Q91 S0
G1 X130.445 Y108.567 E0.01070
G1 X130.445 Y100.428 E0.23992
G1 X130.082 Y100.428 E0.01070
G1 X130.082 Y108.567 E0.23992
G1 X129.719 Y108.567 E0.01070
G1 X129.719 Y100.428 E0.23992
G1 X129.356 Y100.428 E0.01070
G1 X129.356 Y108.567 E0.23992
G1 X128.993 Y108.567 E0.01070
G1 X128.993 Y100.428 E0.23992
M73 P92 R0
M73 Q92 S0
G1 X128.630 Y100.428 E0.01070
G1 X128.630 Y108.567 E0.23992
G1 X128.267 Y108.567 E0.01070
G1 X128.267 Y100.428 E0.23992
G1 X127.904 Y100.428 E0.01070
G1 X127.904 Y108.567 E0.23992
G1 X127.541 Y108.567 E0.01070
G1 X127.541 Y100.428 E0.23992
G1 X127.178 Y100.428 E0.01070
G1 X127.178 Y108.567 E0.23992
G1 X126.815 Y108.567 E0.01070
G1 X126.815 Y100.428 E0.23992
M73 P93 R0
M73 Q93 S0
G1 X126.452 Y100.428 E0.01070
G1 X126.452 Y108.567 E0.23992
G1 X126.089 Y108.567 E0.01070
G1 X126.089 Y100.428 E0.23992
G1 X125.726 Y100.428 E0.01070
G1 X125.726 Y108.567 E0.23992
G1 X125.363 Y108.567 E0.01070
G1 X125.363 Y100.428 E0.23992
G1 X125.000 Y100.428 E0.01070
G1 X125.000 Y108.567 E0.23992
M73 P94 R0
M73 Q94 S0
G1 X124.637 Y108.567 E0.01070
G1 X124.637 Y100.428 E0.23992
G1 X124.274 Y100.428 E0.01070
G1 X124.274 Y108.567 E0.23992
G1 X123.911 Y108.567 E0.01070
G1 X123.911 Y100.428 E0.23992
G1 X123.548 Y100.428 E0.01070
G1 X123.548 Y108.567 E0.23992
G1 X123.185 Y108.567 E0.01070
G1 X123.185 Y100.428 E0.23992
M73 P95 R0
M73 Q95 S0
G1 X122.822 Y100.428 E0.01070
G1 X122.822 Y108.567 E0.23992
G1 X122.459 Y108.567 E0.01070
G1 X122.459 Y100.428 E0.23992
G1 X122.096 Y100.428 E0.01070
G1 X122.096 Y108.567 E0.23992
G1 X121.733 Y108.567 E0.01070
G1 X121.733 Y100.428 E0.23992
G1 X121.370 Y100.428 E0.01070
G1 X121.370 Y108.567 E0.23992
G1 X121.007 Y108.567 E0.01070
G1 X121.007 Y100.428 E0.23992
M73 P96 R0
M73 Q96 S0
G1 X120.644 Y100.428 E0.01070
G1 X120.644 Y108.567 E0.23992
G1 X120.281 Y108.567 E0.01070
G1 X120.281 Y100.428 E0.23992
G1 X119.917 Y100.428 E0.01070
G1 X119.917 Y108.567 E0.23992
G1 X119.554 Y108.567 E0.01070
G1 X119.554 Y100.428 E0.23992
G1 X119.191 Y100.428 E0.01070
G1 X119.191 Y108.567 E0.23992
M73 P97 R0
M73 Q97 S0
G1 X118.828 Y108.567 E0.01070
G1 X118.828 Y100.428 E0.23992
G1 X118.465 Y100.428 E0.01070
G1 X118.465 Y108.728 E0.24466
; stop printing object LED_Cover_Remote_LED.stl id:0 copy 0
;WIPE_START
G1 F8640.000;_WIPE
G1 X118.465 Y104.614 E-0.95000
;WIPE_END
G1 E-0.05000 F2100.000
G1 Z2.100 F10800.000
M107
;TYPE:Custom
; Filament-specific end gcode
G4 ; wait
M221 S100 ; reset flow
M900 K0 ; reset LA
M907 E538 ; reset extruder motor current
M104 S0 ; turn off temperature
M140 S0 ; turn off heatbed
M107 ; turn off fan
G1 Z31.9 ; Move print head up
M73 P98 R0
M73 Q98 S0
G1 X0 Y200 F3000 ; home X axis
M84 ; disable motors
M73 P100 R0
M73 Q100 S0
; filament used [mm] = 204.84
; filament used [cm3] = 0.49
; filament used [g] = 0.63
; filament cost = 0.02
; total filament used [g] = 0.63
; total filament cost = 0.02
; estimated printing time (normal mode) = 3m 48s
; estimated printing time (silent mode) = 3m 48s

; avoid_crossing_perimeters = 0
; avoid_crossing_perimeters_max_detour = 0
; bed_custom_model = 
; bed_custom_texture = 
; bed_shape = 0x0,250x0,250x210,0x210
; bed_temperature = 75
; before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
; between_objects_gcode = 
; bottom_fill_pattern = monotonic
; bottom_solid_layers = 4
; bottom_solid_min_thickness = 0.5
; bridge_acceleration = 1000
; bridge_angle = 0
; bridge_fan_speed = 50
; bridge_flow_ratio = 0.95
; bridge_speed = 30
; brim_width = 5
; clip_multipart_objects = 1
; color_change_gcode = M600
; compatible_printers_condition_cummulative = "printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4";"nozzle_diameter[0]!=0.6 and printer_model!=\"MK2SMM\" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)"
; complete_objects = 0
; cooling = 1
; cooling_tube_length = 5
; cooling_tube_retraction = 91.5
; default_acceleration = 1000
; default_filament_profile = "Prusament PLA"
; default_print_profile = 0.15mm QUALITY @MK3
; deretract_speed = 0
; disable_fan_first_layers = 3
; dont_support_bridges = 1
; draft_shield = 0
; duplicate_distance = 6
; elefant_foot_compensation = 0.2
; end_filament_gcode = "; Filament-specific end gcode"
; end_gcode = G4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
; ensure_vertical_shell_thickness = 1
; external_perimeter_extrusion_width = 0.45
; external_perimeter_speed = 25
; external_perimeters_first = 0
; extra_loading_move = -2
; extra_perimeters = 0
; extruder_clearance_height = 20
; extruder_clearance_radius = 45
; extruder_colour = ""
; extruder_offset = 0x0
; extrusion_axis = E
; extrusion_multiplier = 0.976492
; extrusion_width = 0.45
; fan_always_on = 1
; fan_below_layer_time = 20
; filament_colour = #FF8000
; filament_cooling_final_speed = 3.4
; filament_cooling_initial_speed = 2.2
; filament_cooling_moves = 4
; filament_cost = 24.99
; filament_density = 1.27
; filament_diameter = 1.75
; filament_load_time = 0
; filament_loading_speed = 28
; filament_loading_speed_start = 3
; filament_max_volumetric_speed = 8
; filament_minimal_purge_on_wipe_tower = 15
; filament_notes = ""
; filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
; filament_retract_length = 1
; filament_retract_lift = 0.2
; filament_settings_id = "Das Filament - PETG"
; filament_soluble = 0
; filament_spool_weight = 0
; filament_toolchange_delay = 0
; filament_type = PETG
; filament_unload_time = 0
; filament_unloading_speed = 90
; filament_unloading_speed_start = 100
; filament_vendor = (Unknown)
; fill_angle = 90
; fill_density = 100%
; fill_pattern = rectilinear
; first_layer_acceleration = 1000
; first_layer_bed_temperature = 80
; first_layer_extrusion_width = 0.8
; first_layer_height = 0.3
; first_layer_speed = 20
; first_layer_temperature = 238
; full_fan_speed_layer = 0
; gap_fill_speed = 40
; gcode_comments = 0
; gcode_flavor = marlin
; gcode_label_objects = 1
; high_current_on_filament_swap = 0
; host_type = octoprint
; infill_acceleration = 1000
; infill_anchor = 2.5
; infill_anchor_max = 12
; infill_every_layers = 1
; infill_extruder = 1
; infill_extrusion_width = 0.45
; infill_first = 0
; infill_only_where_needed = 0
; infill_overlap = 25%
; infill_speed = 80
; inherits_cummulative = ;"Prusament PETG";
; interface_shells = 0
; ironing = 0
; ironing_flowrate = 15%
; ironing_spacing = 0.1
; ironing_speed = 15
; ironing_type = top
; layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
; layer_height = 0.2
; machine_limits_usage = emit_to_gcode
; machine_max_acceleration_e = 5000,5000
; machine_max_acceleration_extruding = 1250,1250
; machine_max_acceleration_retracting = 1250,1250
; machine_max_acceleration_x = 1000,960
; machine_max_acceleration_y = 1000,960
; machine_max_acceleration_z = 200,200
; machine_max_feedrate_e = 120,120
; machine_max_feedrate_x = 200,100
; machine_max_feedrate_y = 200,100
; machine_max_feedrate_z = 12,12
; machine_max_jerk_e = 4.5,4.5
; machine_max_jerk_x = 8,8
; machine_max_jerk_y = 8,8
; machine_max_jerk_z = 0.4,0.4
; machine_min_extruding_rate = 0,0
; machine_min_travel_rate = 0,0
; max_fan_speed = 50
; max_layer_height = 0.25
; max_print_height = 210
; max_print_speed = 200
; max_volumetric_speed = 0
; min_fan_speed = 30
; min_layer_height = 0.07
; min_print_speed = 15
; min_skirt_length = 4
; notes = 
; nozzle_diameter = 0.4
; only_retract_when_crossing_perimeters = 0
; ooze_prevention = 0
; output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
; overhangs = 0
; parking_pos_retraction = 92
; pause_print_gcode = M601
; perimeter_acceleration = 800
; perimeter_extruder = 1
; perimeter_extrusion_width = 0.45
; perimeter_speed = 45
; perimeters = 2
; physical_printer_settings_id = 
; post_process = 
; print_settings_id = 0.20mm QUALITY @MK3
; printer_model = MK3S
; printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
; printer_settings_id = Original Prusa i3 MK3S & MK3S+
; printer_technology = FFF
; printer_variant = 0.4
; printer_vendor = 
; raft_layers = 0
; remaining_times = 1
; resolution = 0
; retract_before_travel = 1
; retract_before_wipe = 0%
; retract_layer_change = 1
; retract_length = 0.8
; retract_length_toolchange = 4
; retract_lift = 0.4
; retract_lift_above = 0
; retract_lift_below = 209
; retract_restart_extra = 0
; retract_restart_extra_toolchange = 0
; retract_speed = 35
; seam_position = aligned
; silent_mode = 1
; single_extruder_multi_material = 0
; single_extruder_multi_material_priming = 0
; skirt_distance = 2
; skirt_height = 3
; skirts = 1
; slice_closing_radius = 0.049
; slowdown_below_layer_time = 20
; small_perimeter_speed = 25
; solid_infill_below_area = 0
; solid_infill_every_layers = 0
; solid_infill_extruder = 1
; solid_infill_extrusion_width = 0.45
; solid_infill_speed = 80
; spiral_vase = 0
; standby_temperature_delta = -5
; start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{else}M900 K45{endif} ; Filament gcode LA 1.0"
; start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
; support_material = 0
; support_material_angle = 0
; support_material_auto = 1
; support_material_buildplate_only = 0
; support_material_contact_distance = 0.1
; support_material_enforce_layers = 0
; support_material_extruder = 0
; support_material_extrusion_width = 0.35
; support_material_interface_contact_loops = 0
; support_material_interface_extruder = 0
; support_material_interface_layers = 2
; support_material_interface_spacing = 0.2
; support_material_interface_speed = 80%
; support_material_pattern = rectilinear
; support_material_spacing = 2
; support_material_speed = 50
; support_material_synchronize_layers = 0
; support_material_threshold = 55
; support_material_with_sheath = 0
; support_material_xy_spacing = 50%
; temperature = 233
; template_custom_gcode = 
; thin_walls = 0
; threads = 4
; thumbnails = 
; toolchange_gcode = 
; top_fill_pattern = monotonic
; top_infill_extrusion_width = 0.4
; top_solid_infill_speed = 40
; top_solid_layers = 5
; top_solid_min_thickness = 0.7
; travel_speed = 180
; use_firmware_retraction = 0
; use_relative_e_distances = 1
; use_volumetric_e = 0
; variable_layer_height = 1
; wipe = 1
; wipe_into_infill = 0
; wipe_into_objects = 0
; wipe_tower = 1
; wipe_tower_bridging = 10
; wipe_tower_no_sparse_layers = 0
; wipe_tower_rotation_angle = 0
; wipe_tower_width = 60
; wipe_tower_x = 170
; wipe_tower_y = 125
; wiping_volumes_extruders = 70,70
; wiping_volumes_matrix = 0
; xy_size_compensation = 0
; z_offset = 0