; generated by PrusaSlicer 2.1.1+win64 on 2021-03-26 at 18:11:48 UTC

; 

; external perimeters extrusion width = 0.45mm
; perimeters extrusion width = 0.45mm
; infill extrusion width = 0.50mm
; solid infill extrusion width = 0.50mm
; top infill extrusion width = 0.50mm
; first layer extrusion width = 0.45mm

M73 P0 R136
M73 Q0 S138
M201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2
M203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec
M204 P1250 R1250 T1250 ; sets acceleration (P, T) and retract acceleration (R), mm/sec^2
M205 X8.00 Y8.00 Z0.40 E4.50 ; sets the jerk limits, mm/sec
M205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec
M107 ; disable fan
M862.3 P "MK3S" ; printer model check
M862.1 P0.4 ; nozzle diameter check
M115 U3.9.0 ; tell printer latest fw version
G90 ; use absolute coordinates
M83 ; extruder relative mode
M104 S215 ; set extruder temp
M140 S60 ; set bed temp
M190 S60 ; wait for bed temp
M109 S215 ; wait for extruder temp
G28 W ; home all without mesh bed level
G80 ; mesh bed leveling
G1 Y-3.0 F1000.0 ; go outside print area
G92 E0.0
G1 X60.0 E9.0 F1000.0 ; intro line
M73 Q0 S138
M73 P0 R136
G1 X100.0 E12.5 F1000.0 ; intro line
G92 E0.0
M221 S95
G21 ; set units to millimeters
G90 ; use absolute coordinates
M83 ; use relative distances for extrusion
M900 K0.06 ; Filament gcode LA 1.5
M900 K30 ; Filament gcode LA 1.0
;BEFORE_LAYER_CHANGE
G92 E0.0
;0.25


G1 E-0.80000 F2100.00000 ; retract
G1 Z0.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;0.25
G1 X65.894 Y64.697 ; move to first skirt point
G1 Z0.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S1000 ; adjust acceleration
G1 F1800
G1 X66.719 Y64.535 E0.03464 ; skirt
G1 X183.282 Y64.535 E4.80193 ; skirt
G1 X184.178 Y64.727 E0.03775 ; skirt
G1 X184.918 Y65.268 E0.03775 ; skirt
G1 X194.202 Y76.331 E0.59497 ; skirt
G1 X194.477 Y76.767 E0.02123 ; skirt
G1 X194.644 Y77.254 E0.02123 ; skirt
G1 X194.693 Y77.732 E0.01980 ; skirt
G1 X194.376 Y116.232 E1.58608 ; skirt
G1 X194.123 Y116.943 E0.03108 ; skirt
G1 X193.645 Y117.527 E0.03108 ; skirt
G1 X171.578 Y136.044 E1.18674 ; skirt
G1 X170.999 Y136.391 E0.02781 ; skirt
G1 X170.174 Y136.553 E0.03464 ; skirt
G1 X78.891 Y136.522 E3.76046 ; skirt
G1 X78.336 Y136.350 E0.02392 ; skirt
G1 X77.849 Y136.041 E0.02377 ; skirt
G1 X55.793 Y117.534 E1.18610 ; skirt
G1 X55.437 Y117.147 E0.02168 ; skirt
G1 X55.184 Y116.690 E0.02153 ; skirt
G1 X55.022 Y115.854 E0.03509 ; skirt
G1 X55.352 Y77.274 E1.58938 ; skirt
G1 X55.527 Y76.758 E0.02243 ; skirt
G1 X55.822 Y76.303 E0.02235 ; skirt
G1 X65.061 Y65.292 E0.59214 ; skirt
G1 X65.442 Y64.945 E0.02123 ; skirt
G1 X65.841 Y64.726 E0.01876 ; skirt
G1 F8640
G1 X66.719 Y64.535 E-0.20741 ; wipe and retract
G1 X69.112 Y64.535 E-0.55259 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z0.850 F10800.000 ; lift Z
G1 X125.000 Y94.741 ; move to first perimeter point
G1 Z0.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F1800
G1 X80.079 Y94.741 E1.85057 ; perimeter
G1 X59.573 Y77.535 E1.10272 ; perimeter
G1 X66.902 Y68.801 E0.46970 ; perimeter
G1 X79.751 Y79.582 E0.69098 ; perimeter
G1 X84.888 Y79.582 E0.21162 ; perimeter
G1 X93.603 Y86.895 E0.46869 ; perimeter
G1 X156.397 Y86.895 E2.58681 ; perimeter
G1 X165.112 Y79.582 E0.46869 ; perimeter
G1 X170.249 Y79.582 E0.21162 ; perimeter
G1 X183.098 Y68.801 E0.69098 ; perimeter
G1 X190.427 Y77.535 E0.46970 ; perimeter
G1 X169.921 Y94.741 E1.10272 ; perimeter
G1 X125.060 Y94.741 E1.84809 ; perimeter
G1 X125.000 Y95.137 F10800.000 ; move to first perimeter point
G1 F1800
G1 X79.934 Y95.137 E1.85651 ; perimeter
G1 X59.015 Y77.584 E1.12499 ; perimeter
G1 X66.853 Y68.243 E0.50236 ; perimeter
G1 X79.895 Y79.186 E0.70136 ; perimeter
G1 X85.032 Y79.186 E0.21162 ; perimeter
G1 X93.748 Y86.499 E0.46869 ; perimeter
G1 X156.252 Y86.499 E2.57492 ; perimeter
G1 X164.968 Y79.186 E0.46869 ; perimeter
G1 X170.105 Y79.186 E0.21162 ; perimeter
G1 X183.147 Y68.242 E0.70136 ; perimeter
G1 X190.985 Y77.584 E0.50236 ; perimeter
G1 X170.066 Y95.137 E1.12499 ; perimeter
G1 X125.060 Y95.137 E1.85404 ; perimeter
G1 X125.000 Y95.534 F10800.000 ; move to first perimeter point
G1 F1800
G1 X79.790 Y95.534 E1.86245 ; perimeter
G1 X58.457 Y77.633 E1.14726 ; perimeter
G1 X66.805 Y67.684 E0.53501 ; perimeter
G1 X80.040 Y78.790 E0.71175 ; perimeter
G1 X85.177 Y78.790 E0.21162 ; perimeter
G1 X93.892 Y86.103 E0.46869 ; perimeter
G1 X156.108 Y86.103 E2.56304 ; perimeter
G1 X164.823 Y78.790 E0.46869 ; perimeter
G1 X169.960 Y78.790 E0.21162 ; perimeter
G1 X183.195 Y67.684 E0.71175 ; perimeter
G1 X191.543 Y77.633 E0.53501 ; perimeter
G1 X170.210 Y95.534 E1.14726 ; perimeter
G1 X125.060 Y95.534 E1.85998 ; perimeter
G1 X124.770 Y95.206 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y95.534 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z0.850 F10800.000 ; lift Z
G1 X100.676 Y94.622 ; move to first infill point
G1 Z0.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F1800
G1 X90.505 Y84.450 E0.59365 ; infill
G1 F8640
G1 X92.832 Y86.778 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z0.850 F10800.000 ; lift Z
G1 X93.630 Y87.014 ; move to first infill point
G1 Z0.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F1800
G1 X101.060 Y94.444 E0.43360 ; infill
G1 X101.621 Y94.444 E0.02317 ; infill
G1 X94.370 Y87.193 E0.42320 ; infill
G1 X94.931 Y87.193 E0.02317 ; infill
G1 X102.183 Y94.444 E0.42320 ; infill
G1 X102.744 Y94.444 E0.02317 ; infill
G1 X95.493 Y87.193 E0.42320 ; infill
G1 X96.054 Y87.193 E0.02317 ; infill
G1 X103.306 Y94.444 E0.42320 ; infill
G1 X103.867 Y94.444 E0.02317 ; infill
G1 X96.616 Y87.193 E0.42320 ; infill
G1 X97.177 Y87.193 E0.02317 ; infill
G1 X104.429 Y94.444 E0.42320 ; infill
G1 X104.990 Y94.444 E0.02317 ; infill
G1 X97.739 Y87.193 E0.42320 ; infill
G1 X98.301 Y87.193 E0.02317 ; infill
G1 X105.552 Y94.444 E0.42320 ; infill
G1 X106.113 Y94.444 E0.02317 ; infill
G1 X98.862 Y87.193 E0.42320 ; infill
G1 X99.424 Y87.193 E0.02317 ; infill
G1 X106.675 Y94.444 E0.42320 ; infill
G1 X107.236 Y94.444 E0.02317 ; infill
G1 X99.985 Y87.193 E0.42320 ; infill
G1 X100.547 Y87.193 E0.02317 ; infill
G1 X107.798 Y94.444 E0.42320 ; infill
G1 X108.359 Y94.444 E0.02317 ; infill
G1 X101.108 Y87.193 E0.42320 ; infill
G1 X101.670 Y87.193 E0.02317 ; infill
G1 X108.921 Y94.444 E0.42320 ; infill
G1 X109.482 Y94.444 E0.02317 ; infill
G1 X102.231 Y87.193 E0.42320 ; infill
G1 X102.793 Y87.193 E0.02317 ; infill
G1 X110.044 Y94.444 E0.42320 ; infill
G1 X110.605 Y94.444 E0.02317 ; infill
G1 X103.354 Y87.193 E0.42320 ; infill
G1 X103.916 Y87.193 E0.02317 ; infill
G1 X111.167 Y94.444 E0.42320 ; infill
G1 X111.728 Y94.444 E0.02317 ; infill
G1 X104.477 Y87.193 E0.42320 ; infill
G1 X105.039 Y87.193 E0.02317 ; infill
G1 X112.290 Y94.444 E0.42320 ; infill
G1 X112.851 Y94.444 E0.02317 ; infill
G1 X105.600 Y87.193 E0.42320 ; infill
G1 X106.162 Y87.193 E0.02317 ; infill
G1 X113.413 Y94.444 E0.42320 ; infill
G1 X113.974 Y94.444 E0.02317 ; infill
G1 X106.723 Y87.193 E0.42320 ; infill
G1 X107.285 Y87.193 E0.02317 ; infill
G1 X114.536 Y94.444 E0.42320 ; infill
G1 X115.097 Y94.444 E0.02317 ; infill
G1 X107.846 Y87.193 E0.42320 ; infill
G1 X108.408 Y87.193 E0.02317 ; infill
G1 X115.659 Y94.444 E0.42320 ; infill
G1 X116.220 Y94.444 E0.02317 ; infill
G1 X108.969 Y87.193 E0.42320 ; infill
M73 Q0 S137
G1 X109.531 Y87.193 E0.02317 ; infill
G1 X116.782 Y94.444 E0.42320 ; infill
M73 P0 R135
G1 X117.343 Y94.444 E0.02317 ; infill
G1 X110.092 Y87.193 E0.42320 ; infill
G1 X110.654 Y87.193 E0.02317 ; infill
G1 X117.905 Y94.444 E0.42320 ; infill
G1 X118.466 Y94.444 E0.02317 ; infill
G1 X111.215 Y87.193 E0.42320 ; infill
G1 X111.777 Y87.193 E0.02317 ; infill
G1 X119.028 Y94.444 E0.42320 ; infill
G1 X119.589 Y94.444 E0.02317 ; infill
G1 X112.338 Y87.193 E0.42320 ; infill
G1 X112.900 Y87.193 E0.02317 ; infill
G1 X120.151 Y94.444 E0.42320 ; infill
G1 X120.712 Y94.444 E0.02317 ; infill
G1 X113.461 Y87.193 E0.42320 ; infill
G1 X114.023 Y87.193 E0.02317 ; infill
G1 X121.274 Y94.444 E0.42320 ; infill
G1 X121.836 Y94.444 E0.02317 ; infill
G1 X114.584 Y87.193 E0.42320 ; infill
G1 X115.146 Y87.193 E0.02317 ; infill
G1 X122.397 Y94.444 E0.42320 ; infill
G1 X122.959 Y94.444 E0.02317 ; infill
G1 X115.707 Y87.193 E0.42320 ; infill
G1 X116.269 Y87.193 E0.02317 ; infill
G1 X123.520 Y94.444 E0.42320 ; infill
G1 X124.082 Y94.444 E0.02317 ; infill
G1 X116.830 Y87.193 E0.42320 ; infill
G1 X117.392 Y87.193 E0.02317 ; infill
G1 X124.643 Y94.444 E0.42320 ; infill
G1 X125.205 Y94.444 E0.02317 ; infill
G1 X117.953 Y87.193 E0.42320 ; infill
G1 X118.515 Y87.193 E0.02317 ; infill
G1 X125.766 Y94.444 E0.42320 ; infill
G1 X126.328 Y94.444 E0.02317 ; infill
G1 X119.076 Y87.193 E0.42320 ; infill
G1 X119.638 Y87.193 E0.02317 ; infill
G1 X126.889 Y94.444 E0.42320 ; infill
G1 X127.451 Y94.444 E0.02317 ; infill
G1 X120.199 Y87.193 E0.42320 ; infill
G1 X120.761 Y87.193 E0.02317 ; infill
G1 X128.012 Y94.444 E0.42320 ; infill
G1 X128.574 Y94.444 E0.02317 ; infill
G1 X121.322 Y87.193 E0.42320 ; infill
G1 X121.884 Y87.193 E0.02317 ; infill
G1 X129.135 Y94.444 E0.42320 ; infill
G1 X129.697 Y94.444 E0.02317 ; infill
G1 X122.445 Y87.193 E0.42320 ; infill
G1 X123.007 Y87.193 E0.02317 ; infill
G1 X130.258 Y94.444 E0.42320 ; infill
G1 X130.820 Y94.444 E0.02317 ; infill
G1 X123.568 Y87.193 E0.42320 ; infill
G1 X124.130 Y87.193 E0.02317 ; infill
G1 X131.381 Y94.444 E0.42320 ; infill
G1 X131.943 Y94.444 E0.02317 ; infill
G1 X124.692 Y87.193 E0.42320 ; infill
G1 X125.253 Y87.193 E0.02317 ; infill
G1 X132.504 Y94.444 E0.42320 ; infill
G1 X133.066 Y94.444 E0.02317 ; infill
G1 X125.815 Y87.193 E0.42320 ; infill
G1 X126.376 Y87.193 E0.02317 ; infill
G1 X133.627 Y94.444 E0.42320 ; infill
G1 X134.189 Y94.444 E0.02317 ; infill
G1 X126.938 Y87.193 E0.42320 ; infill
G1 X127.499 Y87.193 E0.02317 ; infill
G1 X134.750 Y94.444 E0.42320 ; infill
G1 X135.312 Y94.444 E0.02317 ; infill
G1 X128.061 Y87.193 E0.42320 ; infill
G1 X128.622 Y87.193 E0.02317 ; infill
G1 X135.873 Y94.444 E0.42320 ; infill
G1 X136.435 Y94.444 E0.02317 ; infill
G1 X129.184 Y87.193 E0.42320 ; infill
G1 X129.745 Y87.193 E0.02317 ; infill
G1 X136.996 Y94.444 E0.42320 ; infill
G1 X137.558 Y94.444 E0.02317 ; infill
G1 X130.307 Y87.193 E0.42320 ; infill
G1 X130.868 Y87.193 E0.02317 ; infill
G1 X138.119 Y94.444 E0.42320 ; infill
G1 X138.681 Y94.444 E0.02317 ; infill
G1 X131.430 Y87.193 E0.42320 ; infill
G1 X131.991 Y87.193 E0.02317 ; infill
G1 X139.242 Y94.444 E0.42320 ; infill
G1 X139.804 Y94.444 E0.02317 ; infill
G1 X132.553 Y87.193 E0.42320 ; infill
G1 X133.114 Y87.193 E0.02317 ; infill
G1 X140.365 Y94.444 E0.42320 ; infill
G1 X140.927 Y94.444 E0.02317 ; infill
G1 X133.676 Y87.193 E0.42320 ; infill
G1 X134.237 Y87.193 E0.02317 ; infill
G1 X141.488 Y94.444 E0.42320 ; infill
G1 X142.050 Y94.444 E0.02317 ; infill
G1 X134.799 Y87.193 E0.42320 ; infill
G1 X135.360 Y87.193 E0.02317 ; infill
G1 X142.611 Y94.444 E0.42320 ; infill
G1 X143.173 Y94.444 E0.02317 ; infill
G1 X135.922 Y87.193 E0.42320 ; infill
G1 X136.483 Y87.193 E0.02317 ; infill
G1 X143.734 Y94.444 E0.42320 ; infill
G1 X144.296 Y94.444 E0.02317 ; infill
G1 X137.045 Y87.193 E0.42320 ; infill
G1 X137.606 Y87.193 E0.02317 ; infill
G1 X144.857 Y94.444 E0.42320 ; infill
G1 X145.419 Y94.444 E0.02317 ; infill
G1 X138.168 Y87.193 E0.42320 ; infill
G1 X138.729 Y87.193 E0.02317 ; infill
G1 X145.980 Y94.444 E0.42320 ; infill
G1 X146.542 Y94.444 E0.02317 ; infill
G1 X139.291 Y87.193 E0.42320 ; infill
G1 X139.852 Y87.193 E0.02317 ; infill
G1 X147.103 Y94.444 E0.42320 ; infill
G1 X147.665 Y94.444 E0.02317 ; infill
G1 X140.414 Y87.193 E0.42320 ; infill
G1 X140.975 Y87.193 E0.02317 ; infill
G1 X148.227 Y94.444 E0.42320 ; infill
G1 X148.788 Y94.444 E0.02317 ; infill
G1 X141.537 Y87.193 E0.42320 ; infill
G1 X142.098 Y87.193 E0.02317 ; infill
G1 X149.350 Y94.444 E0.42320 ; infill
G1 X149.911 Y94.444 E0.02317 ; infill
G1 X142.660 Y87.193 E0.42320 ; infill
G1 X143.221 Y87.193 E0.02317 ; infill
G1 X150.473 Y94.444 E0.42320 ; infill
G1 X151.034 Y94.444 E0.02317 ; infill
G1 X143.783 Y87.193 E0.42320 ; infill
G1 X144.344 Y87.193 E0.02317 ; infill
G1 X151.596 Y94.444 E0.42320 ; infill
G1 X152.157 Y94.444 E0.02317 ; infill
G1 X144.906 Y87.193 E0.42320 ; infill
G1 X145.467 Y87.193 E0.02317 ; infill
G1 X152.719 Y94.444 E0.42320 ; infill
G1 X153.280 Y94.444 E0.02317 ; infill
G1 X146.029 Y87.193 E0.42320 ; infill
G1 X146.590 Y87.193 E0.02317 ; infill
G1 X153.842 Y94.444 E0.42320 ; infill
G1 X154.403 Y94.444 E0.02317 ; infill
G1 X147.152 Y87.193 E0.42320 ; infill
G1 X147.713 Y87.193 E0.02317 ; infill
G1 X154.965 Y94.444 E0.42320 ; infill
G1 X155.526 Y94.444 E0.02317 ; infill
G1 X148.275 Y87.193 E0.42320 ; infill
G1 X148.836 Y87.193 E0.02317 ; infill
G1 X156.088 Y94.444 E0.42320 ; infill
G1 X156.649 Y94.444 E0.02317 ; infill
G1 X149.398 Y87.193 E0.42320 ; infill
G1 X149.959 Y87.193 E0.02317 ; infill
G1 X157.211 Y94.444 E0.42320 ; infill
G1 X157.772 Y94.444 E0.02317 ; infill
G1 X150.521 Y87.193 E0.42320 ; infill
G1 X151.083 Y87.193 E0.02317 ; infill
G1 X158.334 Y94.444 E0.42320 ; infill
G1 X158.895 Y94.444 E0.02317 ; infill
G1 X151.644 Y87.193 E0.42320 ; infill
G1 X152.206 Y87.193 E0.02317 ; infill
G1 X159.457 Y94.444 E0.42320 ; infill
G1 X160.018 Y94.444 E0.02317 ; infill
G1 X152.767 Y87.193 E0.42320 ; infill
G1 X153.329 Y87.193 E0.02317 ; infill
G1 X160.580 Y94.444 E0.42320 ; infill
G1 X161.141 Y94.444 E0.02317 ; infill
G1 X153.890 Y87.193 E0.42320 ; infill
G1 X154.452 Y87.193 E0.02317 ; infill
G1 X161.703 Y94.444 E0.42320 ; infill
G1 X162.264 Y94.444 E0.02317 ; infill
G1 X155.013 Y87.193 E0.42320 ; infill
G1 X155.575 Y87.193 E0.02317 ; infill
G1 X162.826 Y94.444 E0.42320 ; infill
G1 X163.387 Y94.444 E0.02317 ; infill
G1 X156.136 Y87.193 E0.42320 ; infill
G1 X156.505 Y87.193 E0.01521 ; infill
G1 X156.610 Y87.105 E0.00565 ; infill
G1 X163.949 Y94.444 E0.42833 ; infill
G1 X164.510 Y94.444 E0.02317 ; infill
G1 X156.915 Y86.848 E0.44328 ; infill
G1 X157.220 Y86.592 E0.01645 ; infill
G1 X165.072 Y94.444 E0.45824 ; infill
G1 X165.633 Y94.444 E0.02317 ; infill
G1 X157.526 Y86.336 E0.47319 ; infill
G1 X157.831 Y86.080 E0.01645 ; infill
G1 X166.195 Y94.444 E0.48814 ; infill
G1 X166.756 Y94.444 E0.02317 ; infill
G1 X158.136 Y85.824 E0.50309 ; infill
G1 X158.442 Y85.568 E0.01645 ; infill
G1 X167.318 Y94.444 E0.51804 ; infill
G1 X167.879 Y94.444 E0.02317 ; infill
G1 X158.747 Y85.311 E0.53300 ; infill
G1 X159.052 Y85.055 E0.01645 ; infill
G1 X168.441 Y94.444 E0.54795 ; infill
G1 X169.002 Y94.444 E0.02317 ; infill
G1 X159.357 Y84.799 E0.56290 ; infill
G1 X159.663 Y84.543 E0.01645 ; infill
G1 X169.564 Y94.444 E0.57785 ; infill
G1 X169.813 Y94.444 E0.01028 ; infill
G1 X169.983 Y94.301 E0.00915 ; infill
G1 X159.968 Y84.287 E0.58449 ; infill
G1 X160.273 Y84.030 E0.01645 ; infill
G1 X170.288 Y94.045 E0.58449 ; infill
G1 X170.594 Y93.789 E0.01645 ; infill
G1 X160.579 Y83.774 E0.58449 ; infill
G1 X160.884 Y83.518 E0.01645 ; infill
G1 X170.899 Y93.533 E0.58449 ; infill
G1 X171.204 Y93.277 E0.01645 ; infill
G1 X161.189 Y83.262 E0.58449 ; infill
G1 X161.495 Y83.006 E0.01645 ; infill
G1 X171.510 Y93.020 E0.58449 ; infill
G1 X171.815 Y92.764 E0.01645 ; infill
G1 X161.800 Y82.749 E0.58449 ; infill
G1 X162.105 Y82.493 E0.01645 ; infill
G1 X172.120 Y92.508 E0.58449 ; infill
G1 X172.425 Y92.252 E0.01645 ; infill
G1 X162.411 Y82.237 E0.58449 ; infill
G1 X162.716 Y81.981 E0.01645 ; infill
G1 X172.731 Y91.996 E0.58449 ; infill
G1 X173.036 Y91.739 E0.01645 ; infill
G1 X163.021 Y81.725 E0.58449 ; infill
G1 X163.327 Y81.468 E0.01645 ; infill
G1 X173.341 Y91.483 E0.58449 ; infill
G1 X173.647 Y91.227 E0.01645 ; infill
G1 X163.632 Y81.212 E0.58449 ; infill
G1 X163.937 Y80.956 E0.01645 ; infill
G1 X173.952 Y90.971 E0.58449 ; infill
G1 X174.257 Y90.715 E0.01645 ; infill
G1 X164.243 Y80.700 E0.58449 ; infill
G1 X164.548 Y80.444 E0.01645 ; infill
G1 X174.563 Y90.458 E0.58449 ; infill
G1 X174.868 Y90.202 E0.01645 ; infill
G1 X164.853 Y80.187 E0.58449 ; infill
G1 X165.159 Y79.931 E0.01645 ; infill
G1 X175.173 Y89.946 E0.58449 ; infill
G1 X175.479 Y89.690 E0.01645 ; infill
G1 X165.668 Y79.880 E0.57255 ; infill
G1 X166.230 Y79.880 E0.02317 ; infill
G1 X175.784 Y89.434 E0.55760 ; infill
G1 X176.089 Y89.178 E0.01645 ; infill
G1 X166.791 Y79.880 E0.54265 ; infill
G1 X167.353 Y79.880 E0.02317 ; infill
G1 X176.395 Y88.921 E0.52769 ; infill
G1 X176.700 Y88.665 E0.01645 ; infill
G1 X167.914 Y79.880 E0.51274 ; infill
G1 X168.476 Y79.880 E0.02317 ; infill
G1 X177.005 Y88.409 E0.49779 ; infill
G1 X177.311 Y88.153 E0.01645 ; infill
G1 X169.037 Y79.880 E0.48284 ; infill
G1 X169.599 Y79.880 E0.02317 ; infill
G1 X177.616 Y87.897 E0.46789 ; infill
G1 X177.921 Y87.640 E0.01645 ; infill
G1 X170.160 Y79.880 E0.45293 ; infill
G1 X170.357 Y79.880 E0.00812 ; infill
G1 X170.555 Y79.713 E0.01069 ; infill
G1 X178.227 Y87.384 E0.44770 ; infill
G1 X178.532 Y87.128 E0.01645 ; infill
G1 X170.861 Y79.457 E0.44770 ; infill
G1 X171.166 Y79.201 E0.01645 ; infill
G1 X178.837 Y86.872 E0.44770 ; infill
G1 X179.142 Y86.616 E0.01645 ; infill
G1 X171.471 Y78.945 E0.44770 ; infill
G1 X171.777 Y78.688 E0.01645 ; infill
G1 X179.448 Y86.359 E0.44770 ; infill
G1 X179.753 Y86.103 E0.01645 ; infill
G1 X172.082 Y78.432 E0.44770 ; infill
G1 X172.387 Y78.176 E0.01645 ; infill
G1 X180.058 Y85.847 E0.44770 ; infill
G1 X180.364 Y85.591 E0.01645 ; infill
G1 X172.693 Y77.920 E0.44770 ; infill
G1 X172.998 Y77.664 E0.01645 ; infill
G1 X180.669 Y85.335 E0.44770 ; infill
G1 X180.974 Y85.078 E0.01645 ; infill
G1 X173.303 Y77.407 E0.44770 ; infill
G1 X173.609 Y77.151 E0.01645 ; infill
G1 X181.280 Y84.822 E0.44770 ; infill
G1 X181.585 Y84.566 E0.01645 ; infill
G1 X173.914 Y76.895 E0.44770 ; infill
G1 X174.219 Y76.639 E0.01645 ; infill
G1 X181.890 Y84.310 E0.44770 ; infill
G1 X182.196 Y84.054 E0.01645 ; infill
G1 X174.525 Y76.383 E0.44770 ; infill
G1 X174.830 Y76.126 E0.01645 ; infill
G1 X182.501 Y83.797 E0.44770 ; infill
G1 X182.806 Y83.541 E0.01645 ; infill
G1 X175.135 Y75.870 E0.44770 ; infill
G1 X175.441 Y75.614 E0.01645 ; infill
G1 X183.112 Y83.285 E0.44770 ; infill
G1 X183.417 Y83.029 E0.01645 ; infill
G1 X175.746 Y75.358 E0.44770 ; infill
G1 X176.051 Y75.102 E0.01645 ; infill
G1 X183.722 Y82.773 E0.44770 ; infill
G1 X184.028 Y82.516 E0.01645 ; infill
G1 X176.357 Y74.845 E0.44770 ; infill
G1 X176.662 Y74.589 E0.01645 ; infill
G1 X184.333 Y82.260 E0.44770 ; infill
G1 X184.638 Y82.004 E0.01645 ; infill
G1 X176.967 Y74.333 E0.44770 ; infill
G1 X177.272 Y74.077 E0.01645 ; infill
G1 X184.944 Y81.748 E0.44770 ; infill
G1 X185.249 Y81.492 E0.01645 ; infill
G1 X177.578 Y73.821 E0.44770 ; infill
M73 Q1 S136
G1 X177.883 Y73.565 E0.01645 ; infill
G1 X185.554 Y81.236 E0.44770 ; infill
M73 P1 R134
G1 X185.859 Y80.979 E0.01645 ; infill
G1 X178.188 Y73.308 E0.44770 ; infill
G1 X178.494 Y73.052 E0.01645 ; infill
G1 X186.165 Y80.723 E0.44770 ; infill
G1 X186.470 Y80.467 E0.01645 ; infill
G1 X178.799 Y72.796 E0.44770 ; infill
G1 X179.104 Y72.540 E0.01645 ; infill
G1 X186.775 Y80.211 E0.44770 ; infill
G1 X187.081 Y79.955 E0.01645 ; infill
G1 X179.410 Y72.284 E0.44770 ; infill
G1 X179.715 Y72.027 E0.01645 ; infill
G1 X187.386 Y79.698 E0.44770 ; infill
G1 X187.691 Y79.442 E0.01645 ; infill
G1 X180.020 Y71.771 E0.44770 ; infill
G1 X180.326 Y71.515 E0.01645 ; infill
G1 X187.997 Y79.186 E0.44770 ; infill
G1 X188.302 Y78.930 E0.01645 ; infill
G1 X180.631 Y71.259 E0.44770 ; infill
G1 X180.936 Y71.003 E0.01645 ; infill
G1 X188.607 Y78.674 E0.44770 ; infill
G1 X188.913 Y78.417 E0.01645 ; infill
G1 X181.242 Y70.746 E0.44770 ; infill
G1 X181.547 Y70.490 E0.01645 ; infill
G1 X189.218 Y78.161 E0.44770 ; infill
G1 X189.523 Y77.905 E0.01645 ; infill
G1 X181.852 Y70.234 E0.44770 ; infill
G1 X182.158 Y69.978 E0.01645 ; infill
G1 X189.955 Y77.775 E0.45509 ; infill
G1 X190.246 Y77.505 F10800.000 ; move to first infill point
G1 F1800
G1 X182.463 Y69.722 E0.45423 ; infill
G1 X182.768 Y69.465 E0.01645 ; infill
G1 X187.318 Y74.015 E0.26551 ; infill
G1 F8640
G1 X184.990 Y71.687 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z0.850 F10800.000 ; lift Z
G1 X100.115 Y94.622 ; move to first infill point
G1 Z0.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F1800
G1 X87.015 Y81.522 E0.76455 ; infill
G1 F8640
G1 X89.342 Y83.850 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z0.850 F10800.000 ; lift Z
G1 X75.417 Y76.101 ; move to first infill point
G1 Z0.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F1800
G1 X93.760 Y94.444 E1.07056 ; infill
G1 X94.321 Y94.444 E0.02317 ; infill
G1 X79.757 Y79.880 E0.85000 ; infill
G1 X80.319 Y79.880 E0.02317 ; infill
G1 X94.883 Y94.444 E0.85000 ; infill
G1 X95.445 Y94.444 E0.02317 ; infill
G1 X80.880 Y79.880 E0.85000 ; infill
G1 X81.442 Y79.880 E0.02317 ; infill
G1 X96.006 Y94.444 E0.85000 ; infill
G1 X96.568 Y94.444 E0.02317 ; infill
G1 X82.003 Y79.880 E0.85000 ; infill
G1 X82.565 Y79.880 E0.02317 ; infill
G1 X97.129 Y94.444 E0.85000 ; infill
G1 X97.691 Y94.444 E0.02317 ; infill
G1 X83.126 Y79.880 E0.85000 ; infill
G1 X83.688 Y79.880 E0.02317 ; infill
G1 X98.252 Y94.444 E0.85000 ; infill
G1 X98.814 Y94.444 E0.02317 ; infill
G1 X84.249 Y79.880 E0.85000 ; infill
G1 X84.780 Y79.880 E0.02190 ; infill
G1 X84.972 Y80.041 E0.01035 ; infill
G1 X99.553 Y94.622 E0.85100 ; infill
G1 F8640
G1 X97.226 Y92.295 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z0.850 F10800.000 ; lift Z
G1 X93.377 Y94.622 ; move to first infill point
G1 Z0.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F1800
G1 X71.927 Y73.172 E1.25187 ; infill
G1 F8640
G1 X74.254 Y75.500 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z0.850 F10800.000 ; lift Z
G1 X68.437 Y70.244 ; move to first infill point
G1 Z0.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F1800
G1 X92.815 Y94.622 E1.42277 ; infill
G1 X92.254 Y94.622 F10800.000 ; move to first infill point
G1 F1800
G1 X66.899 Y69.267 E1.47977 ; infill
G1 X66.643 Y69.573 E0.01645 ; infill
G1 X91.514 Y94.444 E1.45154 ; infill
G1 X90.952 Y94.444 E0.02317 ; infill
G1 X66.386 Y69.878 E1.43372 ; infill
G1 X66.130 Y70.183 E0.01645 ; infill
G1 X90.391 Y94.444 E1.41590 ; infill
G1 X89.829 Y94.444 E0.02317 ; infill
G1 X65.874 Y70.489 E1.39808 ; infill
G1 X65.618 Y70.794 E0.01645 ; infill
G1 X89.268 Y94.444 E1.38027 ; infill
G1 X88.706 Y94.444 E0.02317 ; infill
G1 X65.362 Y71.099 E1.36245 ; infill
G1 X65.106 Y71.405 E0.01645 ; infill
G1 X88.145 Y94.444 E1.34463 ; infill
G1 X87.583 Y94.444 E0.02317 ; infill
G1 X64.849 Y71.710 E1.32681 ; infill
G1 X64.593 Y72.015 E0.01645 ; infill
G1 X87.022 Y94.444 E1.30899 ; infill
G1 X86.460 Y94.444 E0.02317 ; infill
G1 X64.337 Y72.320 E1.29117 ; infill
G1 X64.081 Y72.626 E0.01645 ; infill
G1 X85.899 Y94.444 E1.27335 ; infill
G1 X85.337 Y94.444 E0.02317 ; infill
G1 X63.825 Y72.931 E1.25553 ; infill
G1 X63.568 Y73.236 E0.01645 ; infill
G1 X84.776 Y94.444 E1.23771 ; infill
G1 X84.214 Y94.444 E0.02317 ; infill
G1 X63.312 Y73.542 E1.21989 ; infill
G1 X63.056 Y73.847 E0.01645 ; infill
G1 X83.653 Y94.444 E1.20207 ; infill
G1 X83.091 Y94.444 E0.02317 ; infill
G1 X62.800 Y74.152 E1.18426 ; infill
G1 X62.544 Y74.458 E0.01645 ; infill
G1 X82.530 Y94.444 E1.16644 ; infill
G1 X81.968 Y94.444 E0.02317 ; infill
G1 X62.287 Y74.763 E1.14862 ; infill
G1 X62.031 Y75.068 E0.01645 ; infill
G1 X81.407 Y94.444 E1.13080 ; infill
G1 X80.845 Y94.444 E0.02317 ; infill
G1 X61.775 Y75.374 E1.11298 ; infill
G1 X61.519 Y75.679 E0.01645 ; infill
G1 X80.462 Y94.622 E1.10557 ; infill
G1 F8640
G1 X78.135 Y92.295 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z0.850 F10800.000 ; lift Z
G1 X78.746 Y93.467 ; move to first infill point
G1 Z0.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F1800
G1 X61.263 Y75.984 E1.02036 ; infill
G1 X61.006 Y76.290 E0.01645 ; infill
G1 X75.256 Y90.539 E0.83164 ; infill
G1 F8640
G1 X72.929 Y88.212 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z0.850 F10800.000 ; lift Z
G1 X71.766 Y87.611 ; move to first infill point
G1 Z0.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F1800
G1 X60.750 Y76.595 E0.64291 ; infill
G1 X60.494 Y76.900 E0.01645 ; infill
G1 X68.276 Y84.683 E0.45419 ; infill
G1 F8640
G1 X65.949 Y82.355 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z0.850 F10800.000 ; lift Z
G1 X64.787 Y81.754 ; move to first infill point
G1 Z0.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F1800
G1 X60.111 Y77.079 E0.27286 ; infill
G1 F8640
G1 X62.439 Y79.406 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z0.850 F10800.000 ; lift Z
G1 X124.715 Y132.887 ; move to first perimeter point
G1 Z0.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F1800
G1 X79.794 Y132.887 E1.85057 ; perimeter
G1 X59.288 Y115.681 E1.10272 ; perimeter
G1 X66.617 Y106.947 E0.46970 ; perimeter
G1 X79.466 Y117.729 E0.69098 ; perimeter
G1 X84.603 Y117.729 E0.21162 ; perimeter
G1 X93.318 Y125.042 E0.46869 ; perimeter
G1 X156.111 Y125.042 E2.58681 ; perimeter
G1 X164.827 Y117.729 E0.46869 ; perimeter
G1 X169.964 Y117.729 E0.21162 ; perimeter
G1 X182.813 Y106.947 E0.69098 ; perimeter
G1 X190.141 Y115.681 E0.46970 ; perimeter
G1 X169.636 Y132.887 E1.10272 ; perimeter
G1 X124.775 Y132.887 E1.84809 ; perimeter
G1 X124.715 Y133.284 F10800.000 ; move to first perimeter point
G1 F1800
G1 X79.649 Y133.284 E1.85651 ; perimeter
M73 Q2 S135
G1 X58.730 Y115.730 E1.12499 ; perimeter
M73 P2 R133
G1 X66.568 Y106.389 E0.50236 ; perimeter
G1 X79.610 Y117.332 E0.70136 ; perimeter
G1 X84.747 Y117.332 E0.21162 ; perimeter
G1 X93.463 Y124.645 E0.46869 ; perimeter
G1 X155.967 Y124.645 E2.57492 ; perimeter
G1 X164.682 Y117.332 E0.46869 ; perimeter
G1 X169.819 Y117.332 E0.21162 ; perimeter
G1 X182.861 Y106.389 E0.70136 ; perimeter
G1 X190.700 Y115.730 E0.50236 ; perimeter
G1 X169.780 Y133.284 E1.12499 ; perimeter
G1 X124.775 Y133.284 E1.85404 ; perimeter
G1 X124.715 Y133.680 F10800.000 ; move to first perimeter point
G1 F1800
G1 X79.505 Y133.680 E1.86245 ; perimeter
G1 X58.171 Y115.779 E1.14726 ; perimeter
G1 X66.519 Y105.830 E0.53501 ; perimeter
G1 X79.754 Y116.936 E0.71175 ; perimeter
G1 X84.891 Y116.936 E0.21162 ; perimeter
G1 X93.607 Y124.249 E0.46869 ; perimeter
G1 X155.823 Y124.249 E2.56304 ; perimeter
G1 X164.538 Y116.936 E0.46869 ; perimeter
G1 X169.675 Y116.936 E0.21162 ; perimeter
G1 X182.910 Y105.830 E0.71175 ; perimeter
G1 X191.258 Y115.779 E0.53501 ; perimeter
G1 X169.925 Y133.680 E1.14726 ; perimeter
G1 X124.775 Y133.680 E1.85998 ; perimeter
G1 X124.485 Y133.352 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y133.680 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z0.850 F10800.000 ; lift Z
G1 X100.391 Y132.768 ; move to first infill point
G1 Z0.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F1800
G1 X90.220 Y122.597 E0.59365 ; infill
G1 F8640
G1 X92.547 Y124.924 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z0.850 F10800.000 ; lift Z
G1 X93.345 Y125.160 ; move to first infill point
G1 Z0.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F1800
G1 X100.774 Y132.590 E0.43360 ; infill
G1 X101.336 Y132.590 E0.02317 ; infill
G1 X94.085 Y125.339 E0.42320 ; infill
G1 X94.646 Y125.339 E0.02317 ; infill
G1 X101.897 Y132.590 E0.42320 ; infill
G1 X102.459 Y132.590 E0.02317 ; infill
G1 X95.208 Y125.339 E0.42320 ; infill
G1 X95.769 Y125.339 E0.02317 ; infill
G1 X103.020 Y132.590 E0.42320 ; infill
G1 X103.582 Y132.590 E0.02317 ; infill
G1 X96.331 Y125.339 E0.42320 ; infill
G1 X96.892 Y125.339 E0.02317 ; infill
G1 X104.143 Y132.590 E0.42320 ; infill
G1 X104.705 Y132.590 E0.02317 ; infill
G1 X97.454 Y125.339 E0.42320 ; infill
G1 X98.015 Y125.339 E0.02317 ; infill
G1 X105.267 Y132.590 E0.42320 ; infill
G1 X105.828 Y132.590 E0.02317 ; infill
G1 X98.577 Y125.339 E0.42320 ; infill
G1 X99.138 Y125.339 E0.02317 ; infill
G1 X106.390 Y132.590 E0.42320 ; infill
G1 X106.951 Y132.590 E0.02317 ; infill
G1 X99.700 Y125.339 E0.42320 ; infill
G1 X100.261 Y125.339 E0.02317 ; infill
G1 X107.513 Y132.590 E0.42320 ; infill
G1 X108.074 Y132.590 E0.02317 ; infill
G1 X100.823 Y125.339 E0.42320 ; infill
G1 X101.384 Y125.339 E0.02317 ; infill
G1 X108.636 Y132.590 E0.42320 ; infill
G1 X109.197 Y132.590 E0.02317 ; infill
G1 X101.946 Y125.339 E0.42320 ; infill
G1 X102.507 Y125.339 E0.02317 ; infill
G1 X109.759 Y132.590 E0.42320 ; infill
G1 X110.320 Y132.590 E0.02317 ; infill
G1 X103.069 Y125.339 E0.42320 ; infill
G1 X103.630 Y125.339 E0.02317 ; infill
G1 X110.882 Y132.590 E0.42320 ; infill
G1 X111.443 Y132.590 E0.02317 ; infill
G1 X104.192 Y125.339 E0.42320 ; infill
G1 X104.753 Y125.339 E0.02317 ; infill
G1 X112.005 Y132.590 E0.42320 ; infill
G1 X112.566 Y132.590 E0.02317 ; infill
G1 X105.315 Y125.339 E0.42320 ; infill
G1 X105.876 Y125.339 E0.02317 ; infill
G1 X113.128 Y132.590 E0.42320 ; infill
G1 X113.689 Y132.590 E0.02317 ; infill
G1 X106.438 Y125.339 E0.42320 ; infill
G1 X107.000 Y125.339 E0.02317 ; infill
G1 X114.251 Y132.590 E0.42320 ; infill
G1 X114.812 Y132.590 E0.02317 ; infill
G1 X107.561 Y125.339 E0.42320 ; infill
G1 X108.123 Y125.339 E0.02317 ; infill
G1 X115.374 Y132.590 E0.42320 ; infill
G1 X115.935 Y132.590 E0.02317 ; infill
G1 X108.684 Y125.339 E0.42320 ; infill
G1 X109.246 Y125.339 E0.02317 ; infill
G1 X116.497 Y132.590 E0.42320 ; infill
G1 X117.058 Y132.590 E0.02317 ; infill
G1 X109.807 Y125.339 E0.42320 ; infill
G1 X110.369 Y125.339 E0.02317 ; infill
G1 X117.620 Y132.590 E0.42320 ; infill
G1 X118.181 Y132.590 E0.02317 ; infill
G1 X110.930 Y125.339 E0.42320 ; infill
G1 X111.492 Y125.339 E0.02317 ; infill
G1 X118.743 Y132.590 E0.42320 ; infill
G1 X119.304 Y132.590 E0.02317 ; infill
G1 X112.053 Y125.339 E0.42320 ; infill
G1 X112.615 Y125.339 E0.02317 ; infill
G1 X119.866 Y132.590 E0.42320 ; infill
G1 X120.427 Y132.590 E0.02317 ; infill
G1 X113.176 Y125.339 E0.42320 ; infill
G1 X113.738 Y125.339 E0.02317 ; infill
G1 X120.989 Y132.590 E0.42320 ; infill
G1 X121.550 Y132.590 E0.02317 ; infill
G1 X114.299 Y125.339 E0.42320 ; infill
G1 X114.861 Y125.339 E0.02317 ; infill
G1 X122.112 Y132.590 E0.42320 ; infill
G1 X122.673 Y132.590 E0.02317 ; infill
G1 X115.422 Y125.339 E0.42320 ; infill
G1 X115.984 Y125.339 E0.02317 ; infill
G1 X123.235 Y132.590 E0.42320 ; infill
G1 X123.796 Y132.590 E0.02317 ; infill
G1 X116.545 Y125.339 E0.42320 ; infill
G1 X117.107 Y125.339 E0.02317 ; infill
G1 X124.358 Y132.590 E0.42320 ; infill
G1 X124.919 Y132.590 E0.02317 ; infill
G1 X117.668 Y125.339 E0.42320 ; infill
G1 X118.230 Y125.339 E0.02317 ; infill
G1 X125.481 Y132.590 E0.42320 ; infill
G1 X126.042 Y132.590 E0.02317 ; infill
G1 X118.791 Y125.339 E0.42320 ; infill
G1 X119.353 Y125.339 E0.02317 ; infill
G1 X126.604 Y132.590 E0.42320 ; infill
G1 X127.165 Y132.590 E0.02317 ; infill
G1 X119.914 Y125.339 E0.42320 ; infill
G1 X120.476 Y125.339 E0.02317 ; infill
G1 X127.727 Y132.590 E0.42320 ; infill
G1 X128.288 Y132.590 E0.02317 ; infill
G1 X121.037 Y125.339 E0.42320 ; infill
G1 X121.599 Y125.339 E0.02317 ; infill
G1 X128.850 Y132.590 E0.42320 ; infill
G1 X129.411 Y132.590 E0.02317 ; infill
G1 X122.160 Y125.339 E0.42320 ; infill
G1 X122.722 Y125.339 E0.02317 ; infill
G1 X129.973 Y132.590 E0.42320 ; infill
G1 X130.534 Y132.590 E0.02317 ; infill
G1 X123.283 Y125.339 E0.42320 ; infill
G1 X123.845 Y125.339 E0.02317 ; infill
G1 X131.096 Y132.590 E0.42320 ; infill
G1 X131.658 Y132.590 E0.02317 ; infill
G1 X124.406 Y125.339 E0.42320 ; infill
G1 X124.968 Y125.339 E0.02317 ; infill
G1 X132.219 Y132.590 E0.42320 ; infill
G1 X132.781 Y132.590 E0.02317 ; infill
G1 X125.529 Y125.339 E0.42320 ; infill
G1 X126.091 Y125.339 E0.02317 ; infill
G1 X133.342 Y132.590 E0.42320 ; infill
G1 X133.904 Y132.590 E0.02317 ; infill
G1 X126.652 Y125.339 E0.42320 ; infill
G1 X127.214 Y125.339 E0.02317 ; infill
G1 X134.465 Y132.590 E0.42320 ; infill
G1 X135.027 Y132.590 E0.02317 ; infill
G1 X127.775 Y125.339 E0.42320 ; infill
G1 X128.337 Y125.339 E0.02317 ; infill
G1 X135.588 Y132.590 E0.42320 ; infill
G1 X136.150 Y132.590 E0.02317 ; infill
G1 X128.898 Y125.339 E0.42320 ; infill
G1 X129.460 Y125.339 E0.02317 ; infill
G1 X136.711 Y132.590 E0.42320 ; infill
G1 X137.273 Y132.590 E0.02317 ; infill
G1 X130.021 Y125.339 E0.42320 ; infill
G1 X130.583 Y125.339 E0.02317 ; infill
G1 X137.834 Y132.590 E0.42320 ; infill
G1 X138.396 Y132.590 E0.02317 ; infill
G1 X131.144 Y125.339 E0.42320 ; infill
G1 X131.706 Y125.339 E0.02317 ; infill
G1 X138.957 Y132.590 E0.42320 ; infill
G1 X139.519 Y132.590 E0.02317 ; infill
G1 X132.267 Y125.339 E0.42320 ; infill
G1 X132.829 Y125.339 E0.02317 ; infill
G1 X140.080 Y132.590 E0.42320 ; infill
G1 X140.642 Y132.590 E0.02317 ; infill
G1 X133.391 Y125.339 E0.42320 ; infill
G1 X133.952 Y125.339 E0.02317 ; infill
G1 X141.203 Y132.590 E0.42320 ; infill
G1 X141.765 Y132.590 E0.02317 ; infill
G1 X134.514 Y125.339 E0.42320 ; infill
G1 X135.075 Y125.339 E0.02317 ; infill
G1 X142.326 Y132.590 E0.42320 ; infill
G1 X142.888 Y132.590 E0.02317 ; infill
G1 X135.637 Y125.339 E0.42320 ; infill
G1 X136.198 Y125.339 E0.02317 ; infill
G1 X143.449 Y132.590 E0.42320 ; infill
G1 X144.011 Y132.590 E0.02317 ; infill
G1 X136.760 Y125.339 E0.42320 ; infill
G1 X137.321 Y125.339 E0.02317 ; infill
G1 X144.572 Y132.590 E0.42320 ; infill
G1 X145.134 Y132.590 E0.02317 ; infill
G1 X137.883 Y125.339 E0.42320 ; infill
G1 X138.444 Y125.339 E0.02317 ; infill
G1 X145.695 Y132.590 E0.42320 ; infill
G1 X146.257 Y132.590 E0.02317 ; infill
G1 X139.006 Y125.339 E0.42320 ; infill
G1 X139.567 Y125.339 E0.02317 ; infill
G1 X146.818 Y132.590 E0.42320 ; infill
G1 X147.380 Y132.590 E0.02317 ; infill
G1 X140.129 Y125.339 E0.42320 ; infill
G1 X140.690 Y125.339 E0.02317 ; infill
G1 X147.941 Y132.590 E0.42320 ; infill
G1 X148.503 Y132.590 E0.02317 ; infill
G1 X141.252 Y125.339 E0.42320 ; infill
G1 X141.813 Y125.339 E0.02317 ; infill
G1 X149.064 Y132.590 E0.42320 ; infill
G1 X149.626 Y132.590 E0.02317 ; infill
G1 X142.375 Y125.339 E0.42320 ; infill
G1 X142.936 Y125.339 E0.02317 ; infill
G1 X150.187 Y132.590 E0.42320 ; infill
G1 X150.749 Y132.590 E0.02317 ; infill
G1 X143.498 Y125.339 E0.42320 ; infill
G1 X144.059 Y125.339 E0.02317 ; infill
G1 X151.310 Y132.590 E0.42320 ; infill
G1 X151.872 Y132.590 E0.02317 ; infill
G1 X144.621 Y125.339 E0.42320 ; infill
G1 X145.182 Y125.339 E0.02317 ; infill
G1 X152.433 Y132.590 E0.42320 ; infill
G1 X152.995 Y132.590 E0.02317 ; infill
G1 X145.744 Y125.339 E0.42320 ; infill
G1 X146.305 Y125.339 E0.02317 ; infill
G1 X153.556 Y132.590 E0.42320 ; infill
G1 X154.118 Y132.590 E0.02317 ; infill
G1 X146.867 Y125.339 E0.42320 ; infill
G1 X147.428 Y125.339 E0.02317 ; infill
G1 X154.679 Y132.590 E0.42320 ; infill
G1 X155.241 Y132.590 E0.02317 ; infill
G1 X147.990 Y125.339 E0.42320 ; infill
G1 X148.551 Y125.339 E0.02317 ; infill
G1 X155.802 Y132.590 E0.42320 ; infill
G1 X156.364 Y132.590 E0.02317 ; infill
G1 X149.113 Y125.339 E0.42320 ; infill
G1 X149.674 Y125.339 E0.02317 ; infill
G1 X156.925 Y132.590 E0.42320 ; infill
G1 X157.487 Y132.590 E0.02317 ; infill
G1 X150.236 Y125.339 E0.42320 ; infill
G1 X150.797 Y125.339 E0.02317 ; infill
G1 X158.049 Y132.590 E0.42320 ; infill
M73 Q2 S134
G1 X158.610 Y132.590 E0.02317 ; infill
G1 X151.359 Y125.339 E0.42320 ; infill
G1 X151.920 Y125.339 E0.02317 ; infill
G1 X159.172 Y132.590 E0.42320 ; infill
M73 P3 R132
G1 X159.733 Y132.590 E0.02317 ; infill
G1 X152.482 Y125.339 E0.42320 ; infill
G1 X153.043 Y125.339 E0.02317 ; infill
G1 X160.295 Y132.590 E0.42320 ; infill
G1 X160.856 Y132.590 E0.02317 ; infill
G1 X153.605 Y125.339 E0.42320 ; infill
G1 X154.166 Y125.339 E0.02317 ; infill
G1 X161.418 Y132.590 E0.42320 ; infill
G1 X161.979 Y132.590 E0.02317 ; infill
G1 X154.728 Y125.339 E0.42320 ; infill
G1 X155.289 Y125.339 E0.02317 ; infill
G1 X162.541 Y132.590 E0.42320 ; infill
G1 X163.102 Y132.590 E0.02317 ; infill
G1 X155.851 Y125.339 E0.42320 ; infill
G1 X156.220 Y125.339 E0.01521 ; infill
G1 X156.324 Y125.251 E0.00565 ; infill
G1 X163.664 Y132.590 E0.42833 ; infill
G1 X164.225 Y132.590 E0.02317 ; infill
G1 X156.630 Y124.995 E0.44328 ; infill
G1 X156.935 Y124.738 E0.01645 ; infill
G1 X164.787 Y132.590 E0.45824 ; infill
G1 X165.348 Y132.590 E0.02317 ; infill
G1 X157.240 Y124.482 E0.47319 ; infill
G1 X157.546 Y124.226 E0.01645 ; infill
G1 X165.910 Y132.590 E0.48814 ; infill
G1 X166.471 Y132.590 E0.02317 ; infill
G1 X157.851 Y123.970 E0.50309 ; infill
G1 X158.156 Y123.714 E0.01645 ; infill
G1 X167.033 Y132.590 E0.51804 ; infill
G1 X167.594 Y132.590 E0.02317 ; infill
G1 X158.462 Y123.457 E0.53300 ; infill
G1 X158.767 Y123.201 E0.01645 ; infill
G1 X168.156 Y132.590 E0.54795 ; infill
G1 X168.717 Y132.590 E0.02317 ; infill
G1 X159.072 Y122.945 E0.56290 ; infill
G1 X159.378 Y122.689 E0.01645 ; infill
G1 X169.279 Y132.590 E0.57785 ; infill
G1 X169.528 Y132.590 E0.01028 ; infill
G1 X169.698 Y132.447 E0.00915 ; infill
G1 X159.683 Y122.433 E0.58449 ; infill
G1 X159.988 Y122.176 E0.01645 ; infill
G1 X170.003 Y132.191 E0.58449 ; infill
G1 X170.308 Y131.935 E0.01645 ; infill
G1 X160.294 Y121.920 E0.58449 ; infill
G1 X160.599 Y121.664 E0.01645 ; infill
G1 X170.614 Y131.679 E0.58449 ; infill
G1 X170.919 Y131.423 E0.01645 ; infill
G1 X160.904 Y121.408 E0.58449 ; infill
G1 X161.210 Y121.152 E0.01645 ; infill
G1 X171.224 Y131.167 E0.58449 ; infill
G1 X171.530 Y130.910 E0.01645 ; infill
G1 X161.515 Y120.896 E0.58449 ; infill
G1 X161.820 Y120.639 E0.01645 ; infill
G1 X171.835 Y130.654 E0.58449 ; infill
G1 X172.140 Y130.398 E0.01645 ; infill
G1 X162.125 Y120.383 E0.58449 ; infill
G1 X162.431 Y120.127 E0.01645 ; infill
G1 X172.446 Y130.142 E0.58449 ; infill
G1 X172.751 Y129.886 E0.01645 ; infill
G1 X162.736 Y119.871 E0.58449 ; infill
G1 X163.041 Y119.615 E0.01645 ; infill
G1 X173.056 Y129.629 E0.58449 ; infill
G1 X173.362 Y129.373 E0.01645 ; infill
G1 X163.347 Y119.358 E0.58449 ; infill
G1 X163.652 Y119.102 E0.01645 ; infill
G1 X173.667 Y129.117 E0.58449 ; infill
G1 X173.972 Y128.861 E0.01645 ; infill
G1 X163.957 Y118.846 E0.58449 ; infill
G1 X164.263 Y118.590 E0.01645 ; infill
G1 X174.278 Y128.605 E0.58449 ; infill
G1 X174.583 Y128.348 E0.01645 ; infill
G1 X164.568 Y118.334 E0.58449 ; infill
G1 X164.873 Y118.077 E0.01645 ; infill
G1 X174.888 Y128.092 E0.58449 ; infill
G1 X175.193 Y127.836 E0.01645 ; infill
G1 X165.383 Y118.026 E0.57255 ; infill
G1 X165.945 Y118.026 E0.02317 ; infill
G1 X175.499 Y127.580 E0.55760 ; infill
G1 X175.804 Y127.324 E0.01645 ; infill
G1 X166.506 Y118.026 E0.54265 ; infill
G1 X167.068 Y118.026 E0.02317 ; infill
G1 X176.109 Y127.067 E0.52769 ; infill
G1 X176.415 Y126.811 E0.01645 ; infill
G1 X167.629 Y118.026 E0.51274 ; infill
G1 X168.191 Y118.026 E0.02317 ; infill
G1 X176.720 Y126.555 E0.49779 ; infill
G1 X177.025 Y126.299 E0.01645 ; infill
G1 X168.752 Y118.026 E0.48284 ; infill
G1 X169.314 Y118.026 E0.02317 ; infill
G1 X177.331 Y126.043 E0.46789 ; infill
G1 X177.636 Y125.786 E0.01645 ; infill
G1 X169.875 Y118.026 E0.45293 ; infill
G1 X170.072 Y118.026 E0.00812 ; infill
G1 X170.270 Y117.859 E0.01069 ; infill
G1 X177.941 Y125.530 E0.44770 ; infill
G1 X178.247 Y125.274 E0.01645 ; infill
G1 X170.576 Y117.603 E0.44770 ; infill
G1 X170.881 Y117.347 E0.01645 ; infill
G1 X178.552 Y125.018 E0.44770 ; infill
G1 X178.857 Y124.762 E0.01645 ; infill
G1 X171.186 Y117.091 E0.44770 ; infill
G1 X171.492 Y116.835 E0.01645 ; infill
G1 X179.163 Y124.506 E0.44770 ; infill
G1 X179.468 Y124.249 E0.01645 ; infill
G1 X171.797 Y116.578 E0.44770 ; infill
G1 X172.102 Y116.322 E0.01645 ; infill
G1 X179.773 Y123.993 E0.44770 ; infill
G1 X180.079 Y123.737 E0.01645 ; infill
G1 X172.408 Y116.066 E0.44770 ; infill
G1 X172.713 Y115.810 E0.01645 ; infill
G1 X180.384 Y123.481 E0.44770 ; infill
G1 X180.689 Y123.225 E0.01645 ; infill
G1 X173.018 Y115.554 E0.44770 ; infill
G1 X173.323 Y115.297 E0.01645 ; infill
G1 X180.995 Y122.968 E0.44770 ; infill
G1 X181.300 Y122.712 E0.01645 ; infill
G1 X173.629 Y115.041 E0.44770 ; infill
G1 X173.934 Y114.785 E0.01645 ; infill
G1 X181.605 Y122.456 E0.44770 ; infill
G1 X181.910 Y122.200 E0.01645 ; infill
G1 X174.239 Y114.529 E0.44770 ; infill
G1 X174.545 Y114.273 E0.01645 ; infill
G1 X182.216 Y121.944 E0.44770 ; infill
G1 X182.521 Y121.687 E0.01645 ; infill
G1 X174.850 Y114.016 E0.44770 ; infill
G1 X175.155 Y113.760 E0.01645 ; infill
G1 X182.826 Y121.431 E0.44770 ; infill
G1 X183.132 Y121.175 E0.01645 ; infill
G1 X175.461 Y113.504 E0.44770 ; infill
G1 X175.766 Y113.248 E0.01645 ; infill
G1 X183.437 Y120.919 E0.44770 ; infill
G1 X183.742 Y120.663 E0.01645 ; infill
G1 X176.071 Y112.992 E0.44770 ; infill
G1 X176.377 Y112.735 E0.01645 ; infill
G1 X184.048 Y120.406 E0.44770 ; infill
G1 X184.353 Y120.150 E0.01645 ; infill
G1 X176.682 Y112.479 E0.44770 ; infill
G1 X176.987 Y112.223 E0.01645 ; infill
G1 X184.658 Y119.894 E0.44770 ; infill
G1 X184.964 Y119.638 E0.01645 ; infill
G1 X177.293 Y111.967 E0.44770 ; infill
G1 X177.598 Y111.711 E0.01645 ; infill
G1 X185.269 Y119.382 E0.44770 ; infill
G1 X185.574 Y119.125 E0.01645 ; infill
G1 X177.903 Y111.454 E0.44770 ; infill
G1 X178.209 Y111.198 E0.01645 ; infill
G1 X185.880 Y118.869 E0.44770 ; infill
G1 X186.185 Y118.613 E0.01645 ; infill
G1 X178.514 Y110.942 E0.44770 ; infill
G1 X178.819 Y110.686 E0.01645 ; infill
G1 X186.490 Y118.357 E0.44770 ; infill
G1 X186.796 Y118.101 E0.01645 ; infill
G1 X179.125 Y110.430 E0.44770 ; infill
G1 X179.430 Y110.174 E0.01645 ; infill
G1 X187.101 Y117.845 E0.44770 ; infill
G1 X187.406 Y117.588 E0.01645 ; infill
G1 X179.735 Y109.917 E0.44770 ; infill
G1 X180.040 Y109.661 E0.01645 ; infill
G1 X187.712 Y117.332 E0.44770 ; infill
G1 X188.017 Y117.076 E0.01645 ; infill
G1 X180.346 Y109.405 E0.44770 ; infill
G1 X180.651 Y109.149 E0.01645 ; infill
G1 X188.322 Y116.820 E0.44770 ; infill
G1 X188.627 Y116.564 E0.01645 ; infill
G1 X180.956 Y108.893 E0.44770 ; infill
G1 X181.262 Y108.636 E0.01645 ; infill
G1 X188.933 Y116.307 E0.44770 ; infill
G1 X189.238 Y116.051 E0.01645 ; infill
G1 X181.567 Y108.380 E0.44770 ; infill
G1 X181.872 Y108.124 E0.01645 ; infill
G1 X189.670 Y115.922 E0.45509 ; infill
G1 X189.961 Y115.651 F10800.000 ; move to first infill point
G1 F1800
G1 X182.178 Y107.868 E0.45423 ; infill
G1 X182.483 Y107.612 E0.01645 ; infill
G1 X187.032 Y112.161 E0.26551 ; infill
G1 F8640
G1 X184.705 Y109.834 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z0.850 F10800.000 ; lift Z
G1 X99.830 Y132.768 ; move to first infill point
G1 Z0.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F1800
G1 X86.730 Y119.668 E0.76455 ; infill
G1 F8640
G1 X89.057 Y121.996 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z0.850 F10800.000 ; lift Z
G1 X75.131 Y114.247 ; move to first infill point
G1 Z0.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F1800
G1 X93.475 Y132.590 E1.07056 ; infill
G1 X94.036 Y132.590 E0.02317 ; infill
G1 X79.472 Y118.026 E0.85000 ; infill
G1 X80.034 Y118.026 E0.02317 ; infill
G1 X94.598 Y132.590 E0.85000 ; infill
G1 X95.159 Y132.590 E0.02317 ; infill
G1 X80.595 Y118.026 E0.85000 ; infill
G1 X81.157 Y118.026 E0.02317 ; infill
G1 X95.721 Y132.590 E0.85000 ; infill
G1 X96.282 Y132.590 E0.02317 ; infill
G1 X81.718 Y118.026 E0.85000 ; infill
G1 X82.280 Y118.026 E0.02317 ; infill
G1 X96.844 Y132.590 E0.85000 ; infill
G1 X97.405 Y132.590 E0.02317 ; infill
G1 X82.841 Y118.026 E0.85000 ; infill
G1 X83.403 Y118.026 E0.02317 ; infill
G1 X97.967 Y132.590 E0.85000 ; infill
G1 X98.528 Y132.590 E0.02317 ; infill
G1 X83.964 Y118.026 E0.85000 ; infill
G1 X84.495 Y118.026 E0.02190 ; infill
G1 X84.687 Y118.187 E0.01035 ; infill
G1 X99.268 Y132.768 E0.85100 ; infill
G1 F8640
G1 X96.941 Y130.441 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z0.850 F10800.000 ; lift Z
G1 X93.092 Y132.768 ; move to first infill point
G1 Z0.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F1800
G1 X71.642 Y111.318 E1.25187 ; infill
G1 F8640
G1 X73.969 Y113.646 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z0.850 F10800.000 ; lift Z
G1 X68.152 Y108.390 ; move to first infill point
G1 Z0.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F1800
G1 X92.530 Y132.768 E1.42277 ; infill
G1 X91.969 Y132.768 F10800.000 ; move to first infill point
G1 F1800
G1 X66.614 Y107.413 E1.47977 ; infill
G1 X66.358 Y107.719 E0.01645 ; infill
G1 X91.229 Y132.590 E1.45154 ; infill
G1 X90.667 Y132.590 E0.02317 ; infill
G1 X66.101 Y108.024 E1.43372 ; infill
G1 X65.845 Y108.329 E0.01645 ; infill
G1 X90.106 Y132.590 E1.41590 ; infill
G1 X89.544 Y132.590 E0.02317 ; infill
G1 X65.589 Y108.635 E1.39808 ; infill
G1 X65.333 Y108.940 E0.01645 ; infill
G1 X88.983 Y132.590 E1.38027 ; infill
G1 X88.421 Y132.590 E0.02317 ; infill
G1 X65.077 Y109.245 E1.36245 ; infill
M73 Q3 S133
G1 X64.820 Y109.551 E0.01645 ; infill
G1 X87.860 Y132.590 E1.34463 ; infill
M73 P3 R131
G1 X87.298 Y132.590 E0.02317 ; infill
G1 X64.564 Y109.856 E1.32681 ; infill
G1 X64.308 Y110.161 E0.01645 ; infill
G1 X86.737 Y132.590 E1.30899 ; infill
G1 X86.175 Y132.590 E0.02317 ; infill
G1 X64.052 Y110.467 E1.29117 ; infill
G1 X63.796 Y110.772 E0.01645 ; infill
G1 X85.614 Y132.590 E1.27335 ; infill
G1 X85.052 Y132.590 E0.02317 ; infill
G1 X63.539 Y111.077 E1.25553 ; infill
G1 X63.283 Y111.383 E0.01645 ; infill
G1 X84.491 Y132.590 E1.23771 ; infill
G1 X83.929 Y132.590 E0.02317 ; infill
G1 X63.027 Y111.688 E1.21989 ; infill
G1 X62.771 Y111.993 E0.01645 ; infill
G1 X83.368 Y132.590 E1.20207 ; infill
G1 X82.806 Y132.590 E0.02317 ; infill
G1 X62.515 Y112.299 E1.18426 ; infill
G1 X62.258 Y112.604 E0.01645 ; infill
G1 X82.245 Y132.590 E1.16644 ; infill
G1 X81.683 Y132.590 E0.02317 ; infill
G1 X62.002 Y112.909 E1.14862 ; infill
G1 X61.746 Y113.214 E0.01645 ; infill
G1 X81.122 Y132.590 E1.13080 ; infill
G1 X80.560 Y132.590 E0.02317 ; infill
G1 X61.490 Y113.520 E1.11298 ; infill
G1 X61.234 Y113.825 E0.01645 ; infill
G1 X80.177 Y132.768 E1.10557 ; infill
G1 F8640
G1 X77.849 Y130.441 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z0.850 F10800.000 ; lift Z
G1 X78.461 Y131.614 ; move to first infill point
G1 Z0.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F1800
G1 X60.977 Y114.130 E1.02036 ; infill
G1 X60.721 Y114.436 E0.01645 ; infill
G1 X74.971 Y128.685 E0.83164 ; infill
G1 F8640
G1 X72.643 Y126.358 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z0.850 F10800.000 ; lift Z
G1 X71.481 Y125.757 ; move to first infill point
G1 Z0.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F1800
G1 X60.465 Y114.741 E0.64291 ; infill
G1 X60.209 Y115.046 E0.01645 ; infill
G1 X67.991 Y122.829 E0.45419 ; infill
G1 F8640
G1 X65.664 Y120.501 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z0.850 F10800.000 ; lift Z
G1 X64.501 Y119.900 ; move to first infill point
G1 Z0.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F1800
G1 X59.826 Y115.225 E0.27286 ; infill
M106 S255 ; enable fan
;BEFORE_LAYER_CHANGE
G92 E0.0
;0.5


G1 F8640
G1 X62.153 Y117.553 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z0.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;0.5
M104 S205 ; set temperature
G1 X55.184 Y116.690 ; move to first skirt point
G1 Z0.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X55.022 Y115.854 E0.03509 ; skirt
G1 X55.352 Y77.274 E1.58938 ; skirt
G1 X55.527 Y76.758 E0.02243 ; skirt
G1 X55.822 Y76.303 E0.02235 ; skirt
G1 X65.061 Y65.292 E0.59214 ; skirt
G1 X65.442 Y64.945 E0.02123 ; skirt
G1 X65.894 Y64.697 E0.02123 ; skirt
G1 X66.719 Y64.535 E0.03464 ; skirt
G1 X183.282 Y64.535 E4.80193 ; skirt
G1 X184.178 Y64.727 E0.03775 ; skirt
G1 X184.918 Y65.268 E0.03775 ; skirt
G1 X194.202 Y76.331 E0.59497 ; skirt
G1 X194.477 Y76.767 E0.02123 ; skirt
G1 X194.644 Y77.254 E0.02123 ; skirt
G1 X194.693 Y77.732 E0.01980 ; skirt
G1 X194.376 Y116.232 E1.58608 ; skirt
G1 X194.123 Y116.943 E0.03108 ; skirt
G1 X193.645 Y117.527 E0.03108 ; skirt
G1 X171.578 Y136.044 E1.18674 ; skirt
G1 X170.999 Y136.391 E0.02781 ; skirt
G1 X170.174 Y136.553 E0.03464 ; skirt
G1 X78.891 Y136.522 E3.76046 ; skirt
G1 X78.336 Y136.350 E0.02392 ; skirt
G1 X77.849 Y136.041 E0.02377 ; skirt
G1 X55.793 Y117.534 E1.18610 ; skirt
G1 X55.437 Y117.147 E0.02168 ; skirt
G1 X55.213 Y116.742 E0.01906 ; skirt
G1 F8640
G1 X55.022 Y115.854 E-0.20988 ; wipe and retract
G1 X55.043 Y113.471 E-0.55012 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.100 F10800.000 ; lift Z
G1 X125.000 Y95.016 ; move to first perimeter point
G1 Z0.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.979 Y95.016 E1.85469 ; perimeter
G1 X59.186 Y77.569 E1.11818 ; perimeter
G1 X66.868 Y68.413 E0.49236 ; perimeter
G1 X79.851 Y79.307 E0.69818 ; perimeter
G1 X84.988 Y79.307 E0.21162 ; perimeter
G1 X93.704 Y86.620 E0.46869 ; perimeter
G1 X156.296 Y86.620 E2.57856 ; perimeter
G1 X165.012 Y79.307 E0.46869 ; perimeter
G1 X170.149 Y79.307 E0.21162 ; perimeter
G1 X183.132 Y68.413 E0.69818 ; perimeter
G1 X190.814 Y77.569 E0.49236 ; perimeter
G1 X170.021 Y95.016 E1.11818 ; perimeter
G1 X125.060 Y95.016 E1.85222 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y95.412 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.834 Y95.412 E1.86063 ; perimeter
G1 X58.627 Y77.618 E1.14045 ; perimeter
G1 X66.819 Y67.855 E0.52502 ; perimeter
G1 X79.995 Y78.911 E0.70857 ; perimeter
G1 X85.132 Y78.911 E0.21162 ; perimeter
G1 X93.848 Y86.224 E0.46869 ; perimeter
G1 X156.152 Y86.224 E2.56667 ; perimeter
G1 X164.868 Y78.911 E0.46869 ; perimeter
G1 X170.005 Y78.911 E0.21162 ; perimeter
G1 X183.181 Y67.855 E0.70857 ; perimeter
G1 X191.373 Y77.618 E0.52502 ; perimeter
G1 X170.166 Y95.412 E1.14045 ; perimeter
G1 X125.060 Y95.412 E1.85816 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y95.412 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.100 F10800.000 ; lift Z
G1 X156.008 Y85.828 ; move to first perimeter point
G1 Z0.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X164.723 Y78.515 E0.46869 ; perimeter
G1 X169.860 Y78.515 E0.21162 ; perimeter
G1 X183.229 Y67.297 E0.71895 ; perimeter
G1 X191.931 Y77.667 E0.55767 ; perimeter
G1 X170.310 Y95.809 E1.16272 ; perimeter
G1 X79.690 Y95.809 E3.73315 ; perimeter
G1 X58.069 Y77.667 E1.16272 ; perimeter
G1 X66.771 Y67.297 E0.55767 ; perimeter
G1 X80.140 Y78.515 E0.71895 ; perimeter
G1 X85.277 Y78.515 E0.21162 ; perimeter
G1 X93.992 Y85.828 E0.46869 ; perimeter
G1 X155.948 Y85.828 E2.55232 ; perimeter
M204 S1000 ; adjust acceleration
G1 X156.334 Y86.059 F10800.000 ; move inwards before travel
G1 F8640
G1 X158.476 Y83.721 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.100 F10800.000 ; lift Z
G1 X161.417 Y82.474 ; move to first infill point
G1 Z0.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8049.77
G1 X148.990 Y94.901 E0.81693 ; infill
G1 X148.358 Y94.901 F10800.000 ; move to first infill point
G1 F8049.77
G1 X156.322 Y86.936 E0.52357 ; infill
G1 X155.690 Y86.936 E0.02940 ; infill
G1 X147.926 Y94.700 E0.51037 ; infill
G1 X147.293 Y94.700 E0.02940 ; infill
G1 X155.057 Y86.936 E0.51037 ; infill
G1 X154.425 Y86.936 E0.02940 ; infill
G1 X146.661 Y94.700 E0.51037 ; infill
G1 X146.029 Y94.700 E0.02940 ; infill
G1 X153.792 Y86.936 E0.51037 ; infill
G1 X153.160 Y86.936 E0.02940 ; infill
G1 X145.396 Y94.700 E0.51037 ; infill
G1 X144.764 Y94.700 E0.02940 ; infill
G1 X152.527 Y86.936 E0.51037 ; infill
G1 X151.895 Y86.936 E0.02940 ; infill
G1 X144.131 Y94.700 E0.51037 ; infill
G1 X143.499 Y94.700 E0.02940 ; infill
G1 X151.263 Y86.936 E0.51037 ; infill
G1 X150.630 Y86.936 E0.02940 ; infill
G1 X142.866 Y94.700 E0.51037 ; infill
G1 X142.234 Y94.700 E0.02940 ; infill
G1 X149.998 Y86.936 E0.51037 ; infill
G1 X149.365 Y86.936 E0.02940 ; infill
G1 X141.601 Y94.700 E0.51037 ; infill
G1 X140.969 Y94.700 E0.02940 ; infill
G1 X148.733 Y86.936 E0.51037 ; infill
G1 X148.100 Y86.936 E0.02940 ; infill
G1 X140.336 Y94.700 E0.51037 ; infill
G1 X139.704 Y94.700 E0.02940 ; infill
G1 X147.468 Y86.936 E0.51037 ; infill
G1 X146.835 Y86.936 E0.02940 ; infill
G1 X139.071 Y94.700 E0.51037 ; infill
G1 X138.439 Y94.700 E0.02940 ; infill
G1 X146.203 Y86.936 E0.51037 ; infill
G1 X145.570 Y86.936 E0.02940 ; infill
G1 X137.807 Y94.700 E0.51037 ; infill
G1 X137.174 Y94.700 E0.02940 ; infill
G1 X144.938 Y86.936 E0.51037 ; infill
G1 X144.305 Y86.936 E0.02940 ; infill
G1 X136.542 Y94.700 E0.51037 ; infill
G1 X135.909 Y94.700 E0.02940 ; infill
G1 X143.673 Y86.936 E0.51037 ; infill
G1 X143.041 Y86.936 E0.02940 ; infill
G1 X135.277 Y94.700 E0.51037 ; infill
G1 X134.644 Y94.700 E0.02940 ; infill
G1 X142.408 Y86.936 E0.51037 ; infill
G1 X141.776 Y86.936 E0.02940 ; infill
G1 X134.012 Y94.700 E0.51037 ; infill
G1 X133.379 Y94.700 E0.02940 ; infill
G1 X141.143 Y86.936 E0.51037 ; infill
G1 X140.511 Y86.936 E0.02940 ; infill
G1 X132.747 Y94.700 E0.51037 ; infill
G1 X132.114 Y94.700 E0.02940 ; infill
G1 X139.878 Y86.936 E0.51037 ; infill
G1 X139.246 Y86.936 E0.02940 ; infill
G1 X131.482 Y94.700 E0.51037 ; infill
G1 X130.849 Y94.700 E0.02940 ; infill
G1 X138.613 Y86.936 E0.51037 ; infill
G1 X137.981 Y86.936 E0.02940 ; infill
G1 X130.217 Y94.700 E0.51037 ; infill
G1 X129.585 Y94.700 E0.02940 ; infill
G1 X137.348 Y86.936 E0.51037 ; infill
G1 X136.716 Y86.936 E0.02940 ; infill
G1 X128.952 Y94.700 E0.51037 ; infill
G1 X128.320 Y94.700 E0.02940 ; infill
G1 X136.083 Y86.936 E0.51037 ; infill
G1 X135.451 Y86.936 E0.02940 ; infill
G1 X127.687 Y94.700 E0.51037 ; infill
G1 X127.055 Y94.700 E0.02940 ; infill
G1 X134.819 Y86.936 E0.51037 ; infill
G1 X134.186 Y86.936 E0.02940 ; infill
G1 X126.422 Y94.700 E0.51037 ; infill
G1 X125.790 Y94.700 E0.02940 ; infill
G1 X133.554 Y86.936 E0.51037 ; infill
G1 X132.921 Y86.936 E0.02940 ; infill
G1 X125.157 Y94.700 E0.51037 ; infill
G1 X124.525 Y94.700 E0.02940 ; infill
G1 X132.289 Y86.936 E0.51037 ; infill
G1 X131.656 Y86.936 E0.02940 ; infill
G1 X123.892 Y94.700 E0.51037 ; infill
G1 X123.260 Y94.700 E0.02940 ; infill
G1 X131.024 Y86.936 E0.51037 ; infill
G1 X130.391 Y86.936 E0.02940 ; infill
G1 X122.627 Y94.700 E0.51037 ; infill
G1 X121.995 Y94.700 E0.02940 ; infill
G1 X129.759 Y86.936 E0.51037 ; infill
G1 X129.126 Y86.936 E0.02940 ; infill
G1 X121.363 Y94.700 E0.51037 ; infill
G1 X120.730 Y94.700 E0.02940 ; infill
G1 X128.494 Y86.936 E0.51037 ; infill
G1 X127.861 Y86.936 E0.02940 ; infill
G1 X120.098 Y94.700 E0.51037 ; infill
G1 X119.465 Y94.700 E0.02940 ; infill
G1 X127.229 Y86.936 E0.51037 ; infill
G1 X126.597 Y86.936 E0.02940 ; infill
G1 X118.833 Y94.700 E0.51037 ; infill
G1 X118.200 Y94.700 E0.02940 ; infill
G1 X125.964 Y86.936 E0.51037 ; infill
G1 X125.332 Y86.936 E0.02940 ; infill
G1 X117.568 Y94.700 E0.51037 ; infill
G1 X116.935 Y94.700 E0.02940 ; infill
G1 X124.699 Y86.936 E0.51037 ; infill
G1 X124.067 Y86.936 E0.02940 ; infill
G1 X116.303 Y94.700 E0.51037 ; infill
G1 X115.670 Y94.700 E0.02940 ; infill
G1 X123.434 Y86.936 E0.51037 ; infill
G1 X122.802 Y86.936 E0.02940 ; infill
G1 X115.038 Y94.700 E0.51037 ; infill
G1 X114.405 Y94.700 E0.02940 ; infill
G1 X122.169 Y86.936 E0.51037 ; infill
G1 X121.537 Y86.936 E0.02940 ; infill
G1 X113.773 Y94.700 E0.51037 ; infill
G1 X113.141 Y94.700 E0.02940 ; infill
G1 X120.904 Y86.936 E0.51037 ; infill
G1 X120.272 Y86.936 E0.02940 ; infill
G1 X112.508 Y94.700 E0.51037 ; infill
G1 X111.876 Y94.700 E0.02940 ; infill
G1 X119.639 Y86.936 E0.51037 ; infill
G1 X119.007 Y86.936 E0.02940 ; infill
G1 X111.243 Y94.700 E0.51037 ; infill
G1 X110.611 Y94.700 E0.02940 ; infill
G1 X118.375 Y86.936 E0.51037 ; infill
G1 X117.742 Y86.936 E0.02940 ; infill
G1 X109.978 Y94.700 E0.51037 ; infill
G1 X109.346 Y94.700 E0.02940 ; infill
G1 X117.110 Y86.936 E0.51037 ; infill
G1 X116.477 Y86.936 E0.02940 ; infill
G1 X108.713 Y94.700 E0.51037 ; infill
G1 X108.081 Y94.700 E0.02940 ; infill
G1 X115.845 Y86.936 E0.51037 ; infill
G1 X115.212 Y86.936 E0.02940 ; infill
G1 X107.448 Y94.700 E0.51037 ; infill
G1 X106.816 Y94.700 E0.02940 ; infill
G1 X114.580 Y86.936 E0.51037 ; infill
G1 X113.947 Y86.936 E0.02940 ; infill
G1 X106.183 Y94.700 E0.51037 ; infill
G1 X105.551 Y94.700 E0.02940 ; infill
G1 X113.315 Y86.936 E0.51037 ; infill
G1 X112.682 Y86.936 E0.02940 ; infill
G1 X104.919 Y94.700 E0.51037 ; infill
G1 X104.286 Y94.700 E0.02940 ; infill
G1 X112.050 Y86.936 E0.51037 ; infill
G1 X111.417 Y86.936 E0.02940 ; infill
M73 Q4 S132
G1 X103.654 Y94.700 E0.51037 ; infill
G1 X103.021 Y94.700 E0.02940 ; infill
G1 X110.785 Y86.936 E0.51037 ; infill
G1 X110.152 Y86.936 E0.02940 ; infill
G1 X102.389 Y94.700 E0.51037 ; infill
G1 X101.756 Y94.700 E0.02940 ; infill
G1 X109.520 Y86.936 E0.51037 ; infill
G1 X108.888 Y86.936 E0.02940 ; infill
G1 X101.124 Y94.700 E0.51037 ; infill
G1 X100.491 Y94.700 E0.02940 ; infill
G1 X108.255 Y86.936 E0.51037 ; infill
M73 P4 R130
G1 X107.623 Y86.936 E0.02940 ; infill
G1 X99.859 Y94.700 E0.51037 ; infill
G1 X99.226 Y94.700 E0.02940 ; infill
G1 X106.990 Y86.936 E0.51037 ; infill
G1 X106.358 Y86.936 E0.02940 ; infill
G1 X98.594 Y94.700 E0.51037 ; infill
G1 X97.961 Y94.700 E0.02940 ; infill
G1 X105.725 Y86.936 E0.51037 ; infill
G1 X105.093 Y86.936 E0.02940 ; infill
G1 X97.329 Y94.700 E0.51037 ; infill
G1 X96.697 Y94.700 E0.02940 ; infill
G1 X104.460 Y86.936 E0.51037 ; infill
G1 X103.828 Y86.936 E0.02940 ; infill
G1 X96.064 Y94.700 E0.51037 ; infill
G1 X95.432 Y94.700 E0.02940 ; infill
G1 X103.195 Y86.936 E0.51037 ; infill
G1 X102.563 Y86.936 E0.02940 ; infill
G1 X94.799 Y94.700 E0.51037 ; infill
G1 X94.167 Y94.700 E0.02940 ; infill
G1 X101.930 Y86.936 E0.51037 ; infill
G1 X101.298 Y86.936 E0.02940 ; infill
G1 X93.534 Y94.700 E0.51037 ; infill
G1 X92.902 Y94.700 E0.02940 ; infill
G1 X100.666 Y86.936 E0.51037 ; infill
G1 X100.033 Y86.936 E0.02940 ; infill
G1 X92.269 Y94.700 E0.51037 ; infill
G1 X91.637 Y94.700 E0.02940 ; infill
G1 X99.401 Y86.936 E0.51037 ; infill
G1 X98.768 Y86.936 E0.02940 ; infill
G1 X91.004 Y94.700 E0.51037 ; infill
G1 X90.372 Y94.700 E0.02940 ; infill
G1 X98.136 Y86.936 E0.51037 ; infill
G1 X97.503 Y86.936 E0.02940 ; infill
G1 X89.739 Y94.700 E0.51037 ; infill
G1 X89.107 Y94.700 E0.02940 ; infill
G1 X96.871 Y86.936 E0.51037 ; infill
G1 X96.238 Y86.936 E0.02940 ; infill
G1 X88.475 Y94.700 E0.51037 ; infill
G1 X87.842 Y94.700 E0.02940 ; infill
G1 X95.606 Y86.936 E0.51037 ; infill
G1 X94.973 Y86.936 E0.02940 ; infill
G1 X87.210 Y94.700 E0.51037 ; infill
G1 X86.577 Y94.700 E0.02940 ; infill
G1 X94.341 Y86.936 E0.51037 ; infill
G1 X93.708 Y86.936 E0.02940 ; infill
G1 X85.945 Y94.700 E0.51037 ; infill
G1 X85.312 Y94.700 E0.02940 ; infill
G1 X93.310 Y86.703 E0.52574 ; infill
G1 X92.966 Y86.414 E0.02087 ; infill
G1 X84.680 Y94.700 E0.54471 ; infill
G1 X84.047 Y94.700 E0.02940 ; infill
G1 X92.622 Y86.125 E0.56368 ; infill
G1 X92.278 Y85.837 E0.02087 ; infill
G1 X83.415 Y94.700 E0.58265 ; infill
G1 X82.782 Y94.700 E0.02940 ; infill
G1 X91.934 Y85.548 E0.60162 ; infill
G1 X91.590 Y85.260 E0.02087 ; infill
G1 X82.150 Y94.700 E0.62059 ; infill
G1 X81.517 Y94.700 E0.02940 ; infill
G1 X91.246 Y84.971 E0.63956 ; infill
G1 X90.903 Y84.683 E0.02087 ; infill
G1 X80.885 Y94.700 E0.65852 ; infill
G1 X80.253 Y94.700 E0.02940 ; infill
G1 X90.559 Y84.394 E0.67749 ; infill
G1 X90.215 Y84.105 E0.02087 ; infill
G1 X79.836 Y94.484 E0.68226 ; infill
G1 X79.492 Y94.196 E0.02087 ; infill
G1 X89.871 Y83.817 E0.68226 ; infill
G1 X89.527 Y83.528 E0.02087 ; infill
G1 X79.148 Y93.907 E0.68226 ; infill
G1 X78.804 Y93.618 E0.02087 ; infill
G1 X89.183 Y83.240 E0.68226 ; infill
G1 X88.839 Y82.951 E0.02087 ; infill
G1 X78.461 Y93.330 E0.68226 ; infill
G1 X78.117 Y93.041 E0.02087 ; infill
G1 X88.495 Y82.663 E0.68226 ; infill
G1 X88.151 Y82.374 E0.02087 ; infill
G1 X77.773 Y92.753 E0.68226 ; infill
G1 X77.429 Y92.464 E0.02087 ; infill
G1 X87.808 Y82.085 E0.68226 ; infill
G1 X87.464 Y81.797 E0.02087 ; infill
G1 X77.085 Y92.176 E0.68226 ; infill
G1 X76.741 Y91.887 E0.02087 ; infill
G1 X87.120 Y81.508 E0.68226 ; infill
G1 X86.776 Y81.220 E0.02087 ; infill
G1 X76.397 Y91.598 E0.68226 ; infill
G1 X76.053 Y91.310 E0.02087 ; infill
G1 X86.432 Y80.931 E0.68226 ; infill
G1 X86.088 Y80.643 E0.02087 ; infill
G1 X75.709 Y91.021 E0.68226 ; infill
G1 X75.365 Y90.733 E0.02087 ; infill
G1 X85.744 Y80.354 E0.68226 ; infill
G1 X85.400 Y80.066 E0.02087 ; infill
G1 X75.022 Y90.444 E0.68226 ; infill
G1 X74.678 Y90.156 E0.02087 ; infill
G1 X85.056 Y79.777 E0.68226 ; infill
G1 X84.873 Y79.623 E0.01111 ; infill
G1 X84.578 Y79.623 E0.01374 ; infill
G1 X74.334 Y89.867 E0.67339 ; infill
G1 X73.990 Y89.579 E0.02087 ; infill
G1 X83.945 Y79.623 E0.65442 ; infill
G1 X83.313 Y79.623 E0.02940 ; infill
G1 X73.646 Y89.290 E0.63545 ; infill
G1 X73.302 Y89.001 E0.02087 ; infill
G1 X82.680 Y79.623 E0.61649 ; infill
G1 X82.048 Y79.623 E0.02940 ; infill
G1 X72.958 Y88.713 E0.59752 ; infill
G1 X72.614 Y88.424 E0.02087 ; infill
G1 X81.415 Y79.623 E0.57855 ; infill
G1 X80.783 Y79.623 E0.02940 ; infill
G1 X72.270 Y88.136 E0.55958 ; infill
G1 X71.926 Y87.847 E0.02087 ; infill
G1 X80.150 Y79.623 E0.54061 ; infill
G1 X79.736 Y79.623 E0.01925 ; infill
G1 X79.617 Y79.524 E0.00720 ; infill
G1 X71.583 Y87.559 E0.52819 ; infill
G1 X71.239 Y87.270 E0.02087 ; infill
G1 X79.274 Y79.235 E0.52819 ; infill
G1 X78.930 Y78.947 E0.02087 ; infill
G1 X70.895 Y86.981 E0.52819 ; infill
G1 X70.551 Y86.693 E0.02087 ; infill
G1 X78.586 Y78.658 E0.52819 ; infill
G1 X78.242 Y78.369 E0.02087 ; infill
G1 X70.207 Y86.404 E0.52819 ; infill
G1 X69.863 Y86.116 E0.02087 ; infill
G1 X77.898 Y78.081 E0.52819 ; infill
G1 X77.554 Y77.792 E0.02087 ; infill
G1 X69.519 Y85.827 E0.52819 ; infill
G1 X69.175 Y85.539 E0.02087 ; infill
G1 X77.210 Y77.504 E0.52819 ; infill
G1 X76.866 Y77.215 E0.02087 ; infill
G1 X68.831 Y85.250 E0.52819 ; infill
G1 X68.488 Y84.961 E0.02087 ; infill
G1 X76.522 Y76.927 E0.52819 ; infill
G1 X76.178 Y76.638 E0.02087 ; infill
G1 X68.144 Y84.673 E0.52819 ; infill
G1 X67.800 Y84.384 E0.02087 ; infill
G1 X75.835 Y76.349 E0.52819 ; infill
G1 X75.491 Y76.061 E0.02087 ; infill
G1 X67.456 Y84.096 E0.52819 ; infill
G1 X67.112 Y83.807 E0.02087 ; infill
G1 X75.147 Y75.772 E0.52819 ; infill
G1 X74.803 Y75.484 E0.02087 ; infill
G1 X66.768 Y83.519 E0.52819 ; infill
G1 X66.424 Y83.230 E0.02087 ; infill
G1 X74.459 Y75.195 E0.52819 ; infill
G1 X74.115 Y74.907 E0.02087 ; infill
G1 X66.080 Y82.942 E0.52819 ; infill
G1 X65.736 Y82.653 E0.02087 ; infill
G1 X73.771 Y74.618 E0.52819 ; infill
G1 X73.427 Y74.330 E0.02087 ; infill
G1 X65.392 Y82.364 E0.52819 ; infill
G1 X65.049 Y82.076 E0.02087 ; infill
G1 X73.083 Y74.041 E0.52819 ; infill
G1 X72.740 Y73.752 E0.02087 ; infill
G1 X64.705 Y81.787 E0.52819 ; infill
G1 X64.361 Y81.499 E0.02087 ; infill
G1 X72.396 Y73.464 E0.52819 ; infill
G1 X72.052 Y73.175 E0.02087 ; infill
G1 X64.017 Y81.210 E0.52819 ; infill
G1 X63.673 Y80.922 E0.02087 ; infill
G1 X71.708 Y72.887 E0.52819 ; infill
G1 X71.364 Y72.598 E0.02087 ; infill
G1 X63.329 Y80.633 E0.52819 ; infill
G1 X62.985 Y80.344 E0.02087 ; infill
G1 X71.020 Y72.310 E0.52819 ; infill
G1 X70.676 Y72.021 E0.02087 ; infill
G1 X62.641 Y80.056 E0.52819 ; infill
G1 X62.297 Y79.767 E0.02087 ; infill
G1 X70.332 Y71.732 E0.52819 ; infill
G1 X69.988 Y71.444 E0.02087 ; infill
G1 X61.953 Y79.479 E0.52819 ; infill
G1 X61.610 Y79.190 E0.02087 ; infill
G1 X69.644 Y71.155 E0.52819 ; infill
G1 X69.301 Y70.867 E0.02087 ; infill
G1 X61.266 Y78.902 E0.52819 ; infill
G1 X60.922 Y78.613 E0.02087 ; infill
G1 X68.957 Y70.578 E0.52819 ; infill
G1 X68.613 Y70.290 E0.02087 ; infill
G1 X60.578 Y78.325 E0.52819 ; infill
G1 X60.234 Y78.036 E0.02087 ; infill
G1 X68.269 Y70.001 E0.52819 ; infill
G1 X67.925 Y69.712 E0.02087 ; infill
G1 X59.748 Y77.890 E0.53756 ; infill
G1 X59.404 Y77.601 F10800.000 ; move to first infill point
G1 F8049.77
G1 X67.581 Y69.424 E0.53756 ; infill
G1 X67.237 Y69.135 E0.02087 ; infill
G1 X62.114 Y74.259 E0.33680 ; infill
G1 F8640
G1 X64.441 Y71.932 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.100 F10800.000 ; lift Z
G1 X154.682 Y94.901 ; move to first infill point
G1 Z0.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8049.77
G1 X169.960 Y79.623 E1.00431 ; infill
G1 X169.327 Y79.623 E0.02940 ; infill
G1 X154.251 Y94.700 E0.99110 ; infill
G1 X153.618 Y94.700 E0.02940 ; infill
G1 X168.695 Y79.623 E0.99110 ; infill
G1 X168.063 Y79.623 E0.02940 ; infill
G1 X152.986 Y94.700 E0.99110 ; infill
G1 X152.353 Y94.700 E0.02940 ; infill
G1 X167.430 Y79.623 E0.99110 ; infill
G1 X166.798 Y79.623 E0.02940 ; infill
G1 X151.721 Y94.700 E0.99110 ; infill
G1 X151.088 Y94.700 E0.02940 ; infill
G1 X166.165 Y79.623 E0.99110 ; infill
G1 X165.533 Y79.623 E0.02940 ; infill
G1 X150.456 Y94.700 E0.99110 ; infill
G1 X149.823 Y94.700 E0.02940 ; infill
G1 X165.101 Y79.422 E1.00431 ; infill
G1 F8640
G1 X162.774 Y81.750 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.100 F10800.000 ; lift Z
G1 X173.935 Y76.280 ; move to first infill point
G1 Z0.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8049.77
G1 X155.315 Y94.901 E1.22407 ; infill
G1 X155.947 Y94.901 F10800.000 ; move to first infill point
G1 F8049.77
G1 X177.866 Y72.982 E1.44089 ; infill
G1 F8640
G1 X175.539 Y75.309 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.100 F10800.000 ; lift Z
G1 X181.797 Y69.684 ; move to first infill point
G1 Z0.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8049.77
G1 X156.580 Y94.901 E1.65771 ; infill
G1 F8640
G1 X158.907 Y92.574 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.100 F10800.000 ; lift Z
G1 X169.861 Y94.901 ; move to first infill point
G1 Z0.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8049.77
G1 X188.938 Y75.824 E1.25403 ; infill
G1 X188.649 Y75.481 E0.02087 ; infill
G1 X169.430 Y94.700 E1.26343 ; infill
G1 X168.797 Y94.700 E0.02940 ; infill
G1 X188.361 Y75.137 E1.28604 ; infill
G1 X188.072 Y74.793 E0.02087 ; infill
G1 X168.165 Y94.700 E1.30865 ; infill
G1 X167.532 Y94.700 E0.02940 ; infill
G1 X187.784 Y74.449 E1.33125 ; infill
G1 X187.495 Y74.105 E0.02087 ; infill
G1 X166.900 Y94.700 E1.35386 ; infill
G1 X166.267 Y94.700 E0.02940 ; infill
G1 X187.206 Y73.761 E1.37647 ; infill
G1 X186.918 Y73.417 E0.02087 ; infill
G1 X165.635 Y94.700 E1.39907 ; infill
G1 X165.002 Y94.700 E0.02940 ; infill
G1 X186.629 Y73.073 E1.42168 ; infill
G1 X186.341 Y72.729 E0.02087 ; infill
G1 X164.370 Y94.700 E1.44429 ; infill
G1 X163.737 Y94.700 E0.02940 ; infill
G1 X186.052 Y72.385 E1.46689 ; infill
G1 X185.764 Y72.042 E0.02087 ; infill
G1 X163.105 Y94.700 E1.48950 ; infill
G1 X162.473 Y94.700 E0.02940 ; infill
G1 X185.475 Y71.698 E1.51211 ; infill
G1 X185.186 Y71.354 E0.02087 ; infill
G1 X161.840 Y94.700 E1.53472 ; infill
G1 X161.208 Y94.700 E0.02940 ; infill
G1 X184.898 Y71.010 E1.55732 ; infill
G1 X184.609 Y70.666 E0.02087 ; infill
G1 X160.575 Y94.700 E1.57993 ; infill
G1 X159.943 Y94.700 E0.02940 ; infill
G1 X184.321 Y70.322 E1.60254 ; infill
G1 X184.032 Y69.978 E0.02087 ; infill
G1 X159.310 Y94.700 E1.62514 ; infill
G1 X158.678 Y94.700 E0.02940 ; infill
G1 X183.744 Y69.634 E1.64775 ; infill
G1 X183.455 Y69.290 E0.02087 ; infill
G1 X158.045 Y94.700 E1.67036 ; infill
G1 X157.413 Y94.700 E0.02940 ; infill
G1 X183.309 Y68.804 E1.70233 ; infill
G1 F8640
G1 X180.982 Y71.131 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.100 F10800.000 ; lift Z
G1 X184.968 Y82.324 ; move to first infill point
G1 Z0.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8049.77
G1 X190.092 Y77.200 E0.33685 ; infill
G1 X189.804 Y76.856 E0.02087 ; infill
G1 X181.037 Y85.623 E0.57628 ; infill
G1 F8640
G1 X183.364 Y83.295 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.100 F10800.000 ; lift Z
G1 X177.106 Y88.921 ; move to first infill point
G1 Z0.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8049.77
G1 X189.515 Y76.512 E0.81571 ; infill
G1 X189.226 Y76.168 E0.02087 ; infill
G1 X173.175 Y92.219 E1.05513 ; infill
G1 F8640
G1 X175.503 Y89.892 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.100 F10800.000 ; lift Z
G1 X124.715 Y133.162 ; move to first perimeter point
G1 Z0.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.693 Y133.162 E1.85469 ; perimeter
G1 X58.901 Y115.715 E1.11818 ; perimeter
G1 X66.583 Y106.560 E0.49236 ; perimeter
G1 X79.566 Y117.453 E0.69818 ; perimeter
G1 X84.703 Y117.453 E0.21162 ; perimeter
G1 X93.418 Y124.767 E0.46869 ; perimeter
G1 X156.011 Y124.767 E2.57856 ; perimeter
G1 X164.727 Y117.453 E0.46869 ; perimeter
G1 X169.864 Y117.453 E0.21162 ; perimeter
G1 X182.847 Y106.560 E0.69818 ; perimeter
G1 X190.529 Y115.715 E0.49236 ; perimeter
G1 X169.736 Y133.162 E1.11818 ; perimeter
G1 X124.775 Y133.162 E1.85222 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y133.559 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.549 Y133.559 E1.86063 ; perimeter
G1 X58.342 Y115.764 E1.14045 ; perimeter
G1 X66.534 Y106.001 E0.52502 ; perimeter
G1 X79.710 Y117.057 E0.70857 ; perimeter
G1 X84.847 Y117.057 E0.21162 ; perimeter
G1 X93.563 Y124.370 E0.46869 ; perimeter
G1 X155.867 Y124.370 E2.56667 ; perimeter
G1 X164.582 Y117.057 E0.46869 ; perimeter
G1 X169.719 Y117.057 E0.21162 ; perimeter
G1 X182.895 Y106.001 E0.70857 ; perimeter
G1 X191.087 Y115.764 E0.52502 ; perimeter
G1 X169.880 Y133.559 E1.14045 ; perimeter
G1 X124.775 Y133.559 E1.85816 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y133.559 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.100 F10800.000 ; lift Z
G1 X155.723 Y123.974 ; move to first perimeter point
G1 Z0.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X164.438 Y116.661 E0.46869 ; perimeter
G1 X169.575 Y116.661 E0.21162 ; perimeter
G1 X182.944 Y105.443 E0.71895 ; perimeter
G1 X191.646 Y115.813 E0.55767 ; perimeter
G1 X170.025 Y133.955 E1.16272 ; perimeter
G1 X79.405 Y133.955 E3.73315 ; perimeter
G1 X57.784 Y115.813 E1.16272 ; perimeter
G1 X66.485 Y105.443 E0.55767 ; perimeter
G1 X79.855 Y116.661 E0.71895 ; perimeter
G1 X84.992 Y116.661 E0.21162 ; perimeter
G1 X93.707 Y123.974 E0.46869 ; perimeter
G1 X155.663 Y123.974 E2.55232 ; perimeter
M204 S1000 ; adjust acceleration
G1 X156.049 Y124.205 F10800.000 ; move inwards before travel
G1 F8640
G1 X158.191 Y121.867 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.100 F10800.000 ; lift Z
G1 X161.132 Y120.620 ; move to first infill point
G1 Z0.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8049.77
G1 X148.705 Y133.047 E0.81693 ; infill
G1 X148.072 Y133.047 F10800.000 ; move to first infill point
G1 F8049.77
G1 X156.037 Y125.083 E0.52357 ; infill
G1 X155.405 Y125.083 E0.02940 ; infill
G1 X147.641 Y132.846 E0.51037 ; infill
G1 X147.008 Y132.846 E0.02940 ; infill
G1 X154.772 Y125.083 E0.51037 ; infill
G1 X154.140 Y125.083 E0.02940 ; infill
G1 X146.376 Y132.846 E0.51037 ; infill
G1 X145.743 Y132.846 E0.02940 ; infill
G1 X153.507 Y125.083 E0.51037 ; infill
G1 X152.875 Y125.083 E0.02940 ; infill
G1 X145.111 Y132.846 E0.51037 ; infill
G1 X144.478 Y132.846 E0.02940 ; infill
G1 X152.242 Y125.083 E0.51037 ; infill
G1 X151.610 Y125.083 E0.02940 ; infill
G1 X143.846 Y132.846 E0.51037 ; infill
G1 X143.214 Y132.846 E0.02940 ; infill
G1 X150.977 Y125.083 E0.51037 ; infill
G1 X150.345 Y125.083 E0.02940 ; infill
G1 X142.581 Y132.846 E0.51037 ; infill
G1 X141.949 Y132.846 E0.02940 ; infill
G1 X149.712 Y125.083 E0.51037 ; infill
G1 X149.080 Y125.083 E0.02940 ; infill
G1 X141.316 Y132.846 E0.51037 ; infill
G1 X140.684 Y132.846 E0.02940 ; infill
G1 X148.447 Y125.083 E0.51037 ; infill
G1 X147.815 Y125.083 E0.02940 ; infill
G1 X140.051 Y132.846 E0.51037 ; infill
G1 X139.419 Y132.846 E0.02940 ; infill
G1 X147.183 Y125.083 E0.51037 ; infill
G1 X146.550 Y125.083 E0.02940 ; infill
M73 Q5 S131
G1 X138.786 Y132.846 E0.51037 ; infill
G1 X138.154 Y132.846 E0.02940 ; infill
G1 X145.918 Y125.083 E0.51037 ; infill
G1 X145.285 Y125.083 E0.02940 ; infill
G1 X137.521 Y132.846 E0.51037 ; infill
G1 X136.889 Y132.846 E0.02940 ; infill
G1 X144.653 Y125.083 E0.51037 ; infill
G1 X144.020 Y125.083 E0.02940 ; infill
G1 X136.256 Y132.846 E0.51037 ; infill
G1 X135.624 Y132.846 E0.02940 ; infill
G1 X143.388 Y125.083 E0.51037 ; infill
G1 X142.755 Y125.083 E0.02940 ; infill
G1 X134.992 Y132.846 E0.51037 ; infill
G1 X134.359 Y132.846 E0.02940 ; infill
G1 X142.123 Y125.083 E0.51037 ; infill
M73 P5 R129
G1 X141.490 Y125.083 E0.02940 ; infill
G1 X133.727 Y132.846 E0.51037 ; infill
G1 X133.094 Y132.846 E0.02940 ; infill
G1 X140.858 Y125.083 E0.51037 ; infill
G1 X140.225 Y125.083 E0.02940 ; infill
G1 X132.462 Y132.846 E0.51037 ; infill
G1 X131.829 Y132.846 E0.02940 ; infill
G1 X139.593 Y125.083 E0.51037 ; infill
G1 X138.961 Y125.083 E0.02940 ; infill
G1 X131.197 Y132.846 E0.51037 ; infill
G1 X130.564 Y132.846 E0.02940 ; infill
G1 X138.328 Y125.083 E0.51037 ; infill
G1 X137.696 Y125.083 E0.02940 ; infill
G1 X129.932 Y132.846 E0.51037 ; infill
G1 X129.299 Y132.846 E0.02940 ; infill
G1 X137.063 Y125.083 E0.51037 ; infill
G1 X136.431 Y125.083 E0.02940 ; infill
G1 X128.667 Y132.846 E0.51037 ; infill
G1 X128.034 Y132.846 E0.02940 ; infill
G1 X135.798 Y125.083 E0.51037 ; infill
G1 X135.166 Y125.083 E0.02940 ; infill
G1 X127.402 Y132.846 E0.51037 ; infill
G1 X126.770 Y132.846 E0.02940 ; infill
G1 X134.533 Y125.083 E0.51037 ; infill
G1 X133.901 Y125.083 E0.02940 ; infill
G1 X126.137 Y132.846 E0.51037 ; infill
G1 X125.505 Y132.846 E0.02940 ; infill
G1 X133.268 Y125.083 E0.51037 ; infill
G1 X132.636 Y125.083 E0.02940 ; infill
G1 X124.872 Y132.846 E0.51037 ; infill
G1 X124.240 Y132.846 E0.02940 ; infill
G1 X132.003 Y125.083 E0.51037 ; infill
G1 X131.371 Y125.083 E0.02940 ; infill
G1 X123.607 Y132.846 E0.51037 ; infill
G1 X122.975 Y132.846 E0.02940 ; infill
G1 X130.739 Y125.083 E0.51037 ; infill
G1 X130.106 Y125.083 E0.02940 ; infill
G1 X122.342 Y132.846 E0.51037 ; infill
G1 X121.710 Y132.846 E0.02940 ; infill
G1 X129.474 Y125.083 E0.51037 ; infill
G1 X128.841 Y125.083 E0.02940 ; infill
G1 X121.077 Y132.846 E0.51037 ; infill
G1 X120.445 Y132.846 E0.02940 ; infill
G1 X128.209 Y125.083 E0.51037 ; infill
G1 X127.576 Y125.083 E0.02940 ; infill
G1 X119.812 Y132.846 E0.51037 ; infill
G1 X119.180 Y132.846 E0.02940 ; infill
G1 X126.944 Y125.083 E0.51037 ; infill
G1 X126.311 Y125.083 E0.02940 ; infill
G1 X118.548 Y132.846 E0.51037 ; infill
G1 X117.915 Y132.846 E0.02940 ; infill
G1 X125.679 Y125.083 E0.51037 ; infill
G1 X125.046 Y125.083 E0.02940 ; infill
G1 X117.283 Y132.846 E0.51037 ; infill
G1 X116.650 Y132.846 E0.02940 ; infill
G1 X124.414 Y125.083 E0.51037 ; infill
G1 X123.781 Y125.083 E0.02940 ; infill
G1 X116.018 Y132.846 E0.51037 ; infill
G1 X115.385 Y132.846 E0.02940 ; infill
G1 X123.149 Y125.083 E0.51037 ; infill
G1 X122.517 Y125.083 E0.02940 ; infill
G1 X114.753 Y132.846 E0.51037 ; infill
G1 X114.120 Y132.846 E0.02940 ; infill
G1 X121.884 Y125.083 E0.51037 ; infill
G1 X121.252 Y125.083 E0.02940 ; infill
G1 X113.488 Y132.846 E0.51037 ; infill
G1 X112.855 Y132.846 E0.02940 ; infill
G1 X120.619 Y125.083 E0.51037 ; infill
G1 X119.987 Y125.083 E0.02940 ; infill
G1 X112.223 Y132.846 E0.51037 ; infill
G1 X111.590 Y132.846 E0.02940 ; infill
G1 X119.354 Y125.083 E0.51037 ; infill
G1 X118.722 Y125.083 E0.02940 ; infill
G1 X110.958 Y132.846 E0.51037 ; infill
G1 X110.326 Y132.846 E0.02940 ; infill
G1 X118.089 Y125.083 E0.51037 ; infill
G1 X117.457 Y125.083 E0.02940 ; infill
G1 X109.693 Y132.846 E0.51037 ; infill
G1 X109.061 Y132.846 E0.02940 ; infill
G1 X116.824 Y125.083 E0.51037 ; infill
G1 X116.192 Y125.083 E0.02940 ; infill
G1 X108.428 Y132.846 E0.51037 ; infill
G1 X107.796 Y132.846 E0.02940 ; infill
G1 X115.559 Y125.083 E0.51037 ; infill
G1 X114.927 Y125.083 E0.02940 ; infill
G1 X107.163 Y132.846 E0.51037 ; infill
G1 X106.531 Y132.846 E0.02940 ; infill
G1 X114.295 Y125.083 E0.51037 ; infill
G1 X113.662 Y125.083 E0.02940 ; infill
G1 X105.898 Y132.846 E0.51037 ; infill
G1 X105.266 Y132.846 E0.02940 ; infill
G1 X113.030 Y125.083 E0.51037 ; infill
G1 X112.397 Y125.083 E0.02940 ; infill
G1 X104.633 Y132.846 E0.51037 ; infill
G1 X104.001 Y132.846 E0.02940 ; infill
G1 X111.765 Y125.083 E0.51037 ; infill
G1 X111.132 Y125.083 E0.02940 ; infill
G1 X103.368 Y132.846 E0.51037 ; infill
G1 X102.736 Y132.846 E0.02940 ; infill
G1 X110.500 Y125.083 E0.51037 ; infill
G1 X109.867 Y125.083 E0.02940 ; infill
G1 X102.104 Y132.846 E0.51037 ; infill
G1 X101.471 Y132.846 E0.02940 ; infill
G1 X109.235 Y125.083 E0.51037 ; infill
G1 X108.602 Y125.083 E0.02940 ; infill
G1 X100.839 Y132.846 E0.51037 ; infill
G1 X100.206 Y132.846 E0.02940 ; infill
G1 X107.970 Y125.083 E0.51037 ; infill
G1 X107.337 Y125.083 E0.02940 ; infill
G1 X99.574 Y132.846 E0.51037 ; infill
G1 X98.941 Y132.846 E0.02940 ; infill
G1 X106.705 Y125.083 E0.51037 ; infill
G1 X106.073 Y125.083 E0.02940 ; infill
G1 X98.309 Y132.846 E0.51037 ; infill
G1 X97.676 Y132.846 E0.02940 ; infill
G1 X105.440 Y125.083 E0.51037 ; infill
G1 X104.808 Y125.083 E0.02940 ; infill
G1 X97.044 Y132.846 E0.51037 ; infill
G1 X96.411 Y132.846 E0.02940 ; infill
G1 X104.175 Y125.083 E0.51037 ; infill
G1 X103.543 Y125.083 E0.02940 ; infill
G1 X95.779 Y132.846 E0.51037 ; infill
G1 X95.146 Y132.846 E0.02940 ; infill
G1 X102.910 Y125.083 E0.51037 ; infill
G1 X102.278 Y125.083 E0.02940 ; infill
G1 X94.514 Y132.846 E0.51037 ; infill
G1 X93.882 Y132.846 E0.02940 ; infill
G1 X101.645 Y125.083 E0.51037 ; infill
G1 X101.013 Y125.083 E0.02940 ; infill
G1 X93.249 Y132.846 E0.51037 ; infill
G1 X92.617 Y132.846 E0.02940 ; infill
G1 X100.380 Y125.083 E0.51037 ; infill
G1 X99.748 Y125.083 E0.02940 ; infill
G1 X91.984 Y132.846 E0.51037 ; infill
G1 X91.352 Y132.846 E0.02940 ; infill
G1 X99.115 Y125.083 E0.51037 ; infill
G1 X98.483 Y125.083 E0.02940 ; infill
G1 X90.719 Y132.846 E0.51037 ; infill
G1 X90.087 Y132.846 E0.02940 ; infill
G1 X97.851 Y125.083 E0.51037 ; infill
G1 X97.218 Y125.083 E0.02940 ; infill
G1 X89.454 Y132.846 E0.51037 ; infill
G1 X88.822 Y132.846 E0.02940 ; infill
G1 X96.586 Y125.083 E0.51037 ; infill
G1 X95.953 Y125.083 E0.02940 ; infill
G1 X88.189 Y132.846 E0.51037 ; infill
G1 X87.557 Y132.846 E0.02940 ; infill
G1 X95.321 Y125.083 E0.51037 ; infill
G1 X94.688 Y125.083 E0.02940 ; infill
G1 X86.924 Y132.846 E0.51037 ; infill
G1 X86.292 Y132.846 E0.02940 ; infill
G1 X94.056 Y125.083 E0.51037 ; infill
G1 X93.423 Y125.083 E0.02940 ; infill
G1 X85.660 Y132.846 E0.51037 ; infill
G1 X85.027 Y132.846 E0.02940 ; infill
G1 X93.025 Y124.849 E0.52574 ; infill
G1 X92.681 Y124.560 E0.02087 ; infill
G1 X84.395 Y132.846 E0.54471 ; infill
G1 X83.762 Y132.846 E0.02940 ; infill
G1 X92.337 Y124.272 E0.56368 ; infill
G1 X91.993 Y123.983 E0.02087 ; infill
G1 X83.130 Y132.846 E0.58265 ; infill
G1 X82.497 Y132.846 E0.02940 ; infill
G1 X91.649 Y123.694 E0.60162 ; infill
G1 X91.305 Y123.406 E0.02087 ; infill
G1 X81.865 Y132.846 E0.62059 ; infill
G1 X81.232 Y132.846 E0.02940 ; infill
G1 X90.961 Y123.117 E0.63956 ; infill
G1 X90.617 Y122.829 E0.02087 ; infill
G1 X80.600 Y132.846 E0.65852 ; infill
G1 X79.967 Y132.846 E0.02940 ; infill
G1 X90.274 Y122.540 E0.67749 ; infill
G1 X89.930 Y122.252 E0.02087 ; infill
G1 X79.551 Y132.630 E0.68226 ; infill
G1 X79.207 Y132.342 E0.02087 ; infill
G1 X89.586 Y121.963 E0.68226 ; infill
G1 X89.242 Y121.674 E0.02087 ; infill
G1 X78.863 Y132.053 E0.68226 ; infill
G1 X78.519 Y131.765 E0.02087 ; infill
G1 X88.898 Y121.386 E0.68226 ; infill
G1 X88.554 Y121.097 E0.02087 ; infill
G1 X78.175 Y131.476 E0.68226 ; infill
G1 X77.831 Y131.187 E0.02087 ; infill
G1 X88.210 Y120.809 E0.68226 ; infill
G1 X87.866 Y120.520 E0.02087 ; infill
G1 X77.488 Y130.899 E0.68226 ; infill
G1 X77.144 Y130.610 E0.02087 ; infill
G1 X87.522 Y120.232 E0.68226 ; infill
G1 X87.178 Y119.943 E0.02087 ; infill
G1 X76.800 Y130.322 E0.68226 ; infill
G1 X76.456 Y130.033 E0.02087 ; infill
G1 X86.835 Y119.655 E0.68226 ; infill
G1 X86.491 Y119.366 E0.02087 ; infill
G1 X76.112 Y129.745 E0.68226 ; infill
G1 X75.768 Y129.456 E0.02087 ; infill
G1 X86.147 Y119.077 E0.68226 ; infill
G1 X85.803 Y118.789 E0.02087 ; infill
G1 X75.424 Y129.167 E0.68226 ; infill
G1 X75.080 Y128.879 E0.02087 ; infill
G1 X85.459 Y118.500 E0.68226 ; infill
G1 X85.115 Y118.212 E0.02087 ; infill
G1 X74.736 Y128.590 E0.68226 ; infill
G1 X74.392 Y128.302 E0.02087 ; infill
G1 X84.771 Y117.923 E0.68226 ; infill
G1 X84.588 Y117.769 E0.01111 ; infill
G1 X84.292 Y117.769 E0.01374 ; infill
G1 X74.049 Y128.013 E0.67339 ; infill
G1 X73.705 Y127.725 E0.02087 ; infill
G1 X83.660 Y117.769 E0.65442 ; infill
G1 X83.027 Y117.769 E0.02940 ; infill
G1 X73.361 Y127.436 E0.63545 ; infill
G1 X73.017 Y127.148 E0.02087 ; infill
G1 X82.395 Y117.769 E0.61649 ; infill
G1 X81.763 Y117.769 E0.02940 ; infill
G1 X72.673 Y126.859 E0.59752 ; infill
G1 X72.329 Y126.570 E0.02087 ; infill
G1 X81.130 Y117.769 E0.57855 ; infill
G1 X80.498 Y117.769 E0.02940 ; infill
G1 X71.985 Y126.282 E0.55958 ; infill
G1 X71.641 Y125.993 E0.02087 ; infill
G1 X79.865 Y117.769 E0.54061 ; infill
G1 X79.451 Y117.769 E0.01925 ; infill
G1 X79.332 Y117.670 E0.00720 ; infill
G1 X71.297 Y125.705 E0.52819 ; infill
G1 X70.954 Y125.416 E0.02087 ; infill
G1 X78.988 Y117.381 E0.52819 ; infill
G1 X78.644 Y117.093 E0.02087 ; infill
G1 X70.610 Y125.128 E0.52819 ; infill
G1 X70.266 Y124.839 E0.02087 ; infill
G1 X78.301 Y116.804 E0.52819 ; infill
G1 X77.957 Y116.516 E0.02087 ; infill
G1 X69.922 Y124.550 E0.52819 ; infill
G1 X69.578 Y124.262 E0.02087 ; infill
G1 X77.613 Y116.227 E0.52819 ; infill
G1 X77.269 Y115.938 E0.02087 ; infill
G1 X69.234 Y123.973 E0.52819 ; infill
G1 X68.890 Y123.685 E0.02087 ; infill
G1 X76.925 Y115.650 E0.52819 ; infill
G1 X76.581 Y115.361 E0.02087 ; infill
G1 X68.546 Y123.396 E0.52819 ; infill
G1 X68.202 Y123.108 E0.02087 ; infill
G1 X76.237 Y115.073 E0.52819 ; infill
G1 X75.893 Y114.784 E0.02087 ; infill
G1 X67.858 Y122.819 E0.52819 ; infill
G1 X67.515 Y122.531 E0.02087 ; infill
G1 X75.549 Y114.496 E0.52819 ; infill
G1 X75.206 Y114.207 E0.02087 ; infill
G1 X67.171 Y122.242 E0.52819 ; infill
G1 X66.827 Y121.953 E0.02087 ; infill
G1 X74.862 Y113.918 E0.52819 ; infill
G1 X74.518 Y113.630 E0.02087 ; infill
G1 X66.483 Y121.665 E0.52819 ; infill
G1 X66.139 Y121.376 E0.02087 ; infill
G1 X74.174 Y113.341 E0.52819 ; infill
G1 X73.830 Y113.053 E0.02087 ; infill
G1 X65.795 Y121.088 E0.52819 ; infill
G1 X65.451 Y120.799 E0.02087 ; infill
G1 X73.486 Y112.764 E0.52819 ; infill
G1 X73.142 Y112.476 E0.02087 ; infill
G1 X65.107 Y120.511 E0.52819 ; infill
G1 X64.763 Y120.222 E0.02087 ; infill
G1 X72.798 Y112.187 E0.52819 ; infill
G1 X72.454 Y111.899 E0.02087 ; infill
G1 X64.419 Y119.933 E0.52819 ; infill
G1 X64.076 Y119.645 E0.02087 ; infill
G1 X72.110 Y111.610 E0.52819 ; infill
G1 X71.767 Y111.321 E0.02087 ; infill
G1 X63.732 Y119.356 E0.52819 ; infill
G1 X63.388 Y119.068 E0.02087 ; infill
G1 X71.423 Y111.033 E0.52819 ; infill
G1 X71.079 Y110.744 E0.02087 ; infill
G1 X63.044 Y118.779 E0.52819 ; infill
G1 X62.700 Y118.491 E0.02087 ; infill
G1 X70.735 Y110.456 E0.52819 ; infill
G1 X70.391 Y110.167 E0.02087 ; infill
G1 X62.356 Y118.202 E0.52819 ; infill
G1 X62.012 Y117.913 E0.02087 ; infill
G1 X70.047 Y109.879 E0.52819 ; infill
G1 X69.703 Y109.590 E0.02087 ; infill
G1 X61.668 Y117.625 E0.52819 ; infill
G1 X61.324 Y117.336 E0.02087 ; infill
G1 X69.359 Y109.301 E0.52819 ; infill
G1 X69.015 Y109.013 E0.02087 ; infill
G1 X60.980 Y117.048 E0.52819 ; infill
G1 X60.637 Y116.759 E0.02087 ; infill
G1 X68.671 Y108.724 E0.52819 ; infill
G1 X68.328 Y108.436 E0.02087 ; infill
G1 X60.293 Y116.471 E0.52819 ; infill
G1 X59.949 Y116.182 E0.02087 ; infill
G1 X67.984 Y108.147 E0.52819 ; infill
G1 X67.640 Y107.859 E0.02087 ; infill
G1 X59.462 Y116.036 E0.53756 ; infill
G1 X59.118 Y115.748 F10800.000 ; move to first infill point
G1 F8049.77
G1 X67.296 Y107.570 E0.53756 ; infill
G1 X66.952 Y107.282 E0.02087 ; infill
G1 X61.828 Y112.405 E0.33680 ; infill
G1 F8640
G1 X64.156 Y110.078 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.100 F10800.000 ; lift Z
G1 X154.397 Y133.047 ; move to first infill point
G1 Z0.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8049.77
G1 X169.675 Y117.769 E1.00431 ; infill
G1 X169.042 Y117.769 E0.02940 ; infill
G1 X153.965 Y132.846 E0.99110 ; infill
G1 X153.333 Y132.846 E0.02940 ; infill
G1 X168.410 Y117.769 E0.99110 ; infill
G1 X167.777 Y117.769 E0.02940 ; infill
G1 X152.700 Y132.846 E0.99110 ; infill
G1 X152.068 Y132.846 E0.02940 ; infill
G1 X167.145 Y117.769 E0.99110 ; infill
G1 X166.512 Y117.769 E0.02940 ; infill
G1 X151.436 Y132.846 E0.99110 ; infill
G1 X150.803 Y132.846 E0.02940 ; infill
G1 X165.880 Y117.769 E0.99110 ; infill
G1 X165.247 Y117.769 E0.02940 ; infill
G1 X150.171 Y132.846 E0.99110 ; infill
G1 X149.538 Y132.846 E0.02940 ; infill
G1 X164.816 Y117.569 E1.00431 ; infill
G1 F8640
G1 X162.488 Y119.896 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.100 F10800.000 ; lift Z
G1 X173.650 Y114.426 ; move to first infill point
G1 Z0.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8049.77
G1 X155.029 Y133.047 E1.22407 ; infill
G1 X155.662 Y133.047 F10800.000 ; move to first infill point
G1 F8049.77
G1 X177.581 Y111.128 E1.44089 ; infill
G1 F8640
G1 X175.254 Y113.456 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.100 F10800.000 ; lift Z
G1 X181.512 Y107.830 ; move to first infill point
G1 Z0.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8049.77
G1 X156.294 Y133.047 E1.65771 ; infill
G1 F8640
G1 X158.622 Y130.720 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.100 F10800.000 ; lift Z
G1 X169.576 Y133.047 ; move to first infill point
G1 Z0.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8049.77
G1 X188.653 Y113.971 E1.25403 ; infill
G1 X188.364 Y113.627 E0.02087 ; infill
G1 X169.144 Y132.846 E1.26343 ; infill
G1 X168.512 Y132.846 E0.02940 ; infill
G1 X188.076 Y113.283 E1.28604 ; infill
G1 X187.787 Y112.939 E0.02087 ; infill
G1 X167.880 Y132.846 E1.30865 ; infill
G1 X167.247 Y132.846 E0.02940 ; infill
G1 X187.498 Y112.595 E1.33125 ; infill
G1 X187.210 Y112.251 E0.02087 ; infill
G1 X166.615 Y132.846 E1.35386 ; infill
G1 X165.982 Y132.846 E0.02940 ; infill
G1 X186.921 Y111.907 E1.37647 ; infill
G1 X186.633 Y111.563 E0.02087 ; infill
G1 X165.350 Y132.846 E1.39907 ; infill
G1 X164.717 Y132.846 E0.02940 ; infill
G1 X186.344 Y111.219 E1.42168 ; infill
G1 X186.056 Y110.876 E0.02087 ; infill
G1 X164.085 Y132.846 E1.44429 ; infill
G1 X163.452 Y132.846 E0.02940 ; infill
G1 X185.767 Y110.532 E1.46689 ; infill
G1 X185.478 Y110.188 E0.02087 ; infill
G1 X162.820 Y132.846 E1.48950 ; infill
G1 X162.187 Y132.846 E0.02940 ; infill
G1 X185.190 Y109.844 E1.51211 ; infill
G1 X184.901 Y109.500 E0.02087 ; infill
G1 X161.555 Y132.846 E1.53472 ; infill
G1 X160.922 Y132.846 E0.02940 ; infill
G1 X184.613 Y109.156 E1.55732 ; infill
G1 X184.324 Y108.812 E0.02087 ; infill
G1 X160.290 Y132.846 E1.57993 ; infill
G1 X159.658 Y132.846 E0.02940 ; infill
G1 X184.036 Y108.468 E1.60254 ; infill
G1 X183.747 Y108.124 E0.02087 ; infill
G1 X159.025 Y132.846 E1.62514 ; infill
G1 X158.393 Y132.846 E0.02940 ; infill
G1 X183.458 Y107.780 E1.64775 ; infill
G1 X183.170 Y107.437 E0.02087 ; infill
G1 X157.760 Y132.846 E1.67036 ; infill
G1 X157.128 Y132.846 E0.02940 ; infill
G1 X183.024 Y106.950 E1.70233 ; infill
G1 F8640
G1 X180.697 Y109.277 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.100 F10800.000 ; lift Z
G1 X184.683 Y120.470 ; move to first infill point
G1 Z0.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8049.77
G1 X189.807 Y115.346 E0.33685 ; infill
G1 X189.518 Y115.002 E0.02087 ; infill
G1 X180.752 Y123.769 E0.57628 ; infill
G1 F8640
G1 X183.079 Y121.441 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.100 F10800.000 ; lift Z
G1 X176.821 Y127.067 ; move to first infill point
G1 Z0.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8049.77
G1 X189.230 Y114.658 E0.81571 ; infill
G1 X188.941 Y114.315 E0.02087 ; infill
G1 X172.890 Y130.365 E1.05513 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;0.75


G1 F8640
G1 X175.218 Y128.038 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;0.75
G1 X170.999 Y136.391 ; move to first skirt point
G1 Z0.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X170.174 Y136.553 E0.03464 ; skirt
G1 X78.891 Y136.522 E3.76046 ; skirt
G1 X78.336 Y136.350 E0.02392 ; skirt
G1 X77.849 Y136.041 E0.02377 ; skirt
G1 X55.793 Y117.534 E1.18610 ; skirt
G1 X55.437 Y117.147 E0.02168 ; skirt
G1 X55.184 Y116.690 E0.02153 ; skirt
G1 X55.022 Y115.854 E0.03509 ; skirt
G1 X55.352 Y77.274 E1.58938 ; skirt
G1 X55.527 Y76.758 E0.02243 ; skirt
G1 X55.822 Y76.303 E0.02235 ; skirt
G1 X65.061 Y65.292 E0.59214 ; skirt
G1 X65.442 Y64.945 E0.02123 ; skirt
G1 X65.894 Y64.697 E0.02123 ; skirt
G1 X66.719 Y64.535 E0.03464 ; skirt
G1 X183.282 Y64.535 E4.80193 ; skirt
G1 X184.178 Y64.727 E0.03775 ; skirt
G1 X184.918 Y65.268 E0.03775 ; skirt
G1 X194.202 Y76.331 E0.59497 ; skirt
G1 X194.477 Y76.767 E0.02123 ; skirt
G1 X194.644 Y77.254 E0.02123 ; skirt
G1 X194.693 Y77.732 E0.01980 ; skirt
G1 X194.376 Y116.232 E1.58608 ; skirt
G1 X194.123 Y116.943 E0.03108 ; skirt
G1 X193.645 Y117.527 E0.03108 ; skirt
G1 X171.578 Y136.044 E1.18674 ; skirt
G1 X171.050 Y136.360 E0.02533 ; skirt
G1 F8640
G1 X170.174 Y136.553 E-0.20725 ; wipe and retract
G1 X167.780 Y136.552 E-0.55275 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.350 F10800.000 ; lift Z
G1 X125.000 Y95.191 ; move to first perimeter point
G1 Z0.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.915 Y95.191 E1.85731 ; perimeter
M73 Q5 S130
G1 X58.939 Y77.591 E1.12801 ; perimeter
G1 X66.847 Y68.167 E0.50678 ; perimeter
G1 X79.915 Y79.132 E0.70277 ; perimeter
G1 X85.052 Y79.132 E0.21162 ; perimeter
G1 X93.767 Y86.445 E0.46869 ; perimeter
G1 X156.233 Y86.445 E2.57331 ; perimeter
M73 P5 R128
G1 X164.948 Y79.132 E0.46869 ; perimeter
G1 X170.085 Y79.132 E0.21162 ; perimeter
G1 X183.153 Y68.167 E0.70277 ; perimeter
G1 X191.061 Y77.591 E0.50678 ; perimeter
G1 X170.085 Y95.191 E1.12801 ; perimeter
G1 X125.060 Y95.191 E1.85484 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y95.588 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.771 Y95.588 E1.86326 ; perimeter
G1 X58.381 Y77.639 E1.15028 ; perimeter
G1 X66.798 Y67.608 E0.53944 ; perimeter
G1 X80.059 Y78.736 E0.71315 ; perimeter
G1 X85.196 Y78.736 E0.21162 ; perimeter
G1 X93.912 Y86.049 E0.46869 ; perimeter
G1 X156.088 Y86.049 E2.56142 ; perimeter
G1 X164.804 Y78.736 E0.46869 ; perimeter
G1 X169.941 Y78.736 E0.21162 ; perimeter
G1 X183.202 Y67.608 E0.71316 ; perimeter
G1 X191.619 Y77.639 E0.53944 ; perimeter
G1 X170.229 Y95.588 E1.15028 ; perimeter
G1 X125.060 Y95.588 E1.86079 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y95.984 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.626 Y95.984 E1.86920 ; perimeter
G1 X57.822 Y77.688 E1.17255 ; perimeter
G1 X66.749 Y67.050 E0.57210 ; perimeter
G1 X80.203 Y78.340 E0.72354 ; perimeter
G1 X85.340 Y78.340 E0.21162 ; perimeter
G1 X94.056 Y85.653 E0.46869 ; perimeter
G1 X155.944 Y85.653 E2.54954 ; perimeter
G1 X164.660 Y78.340 E0.46869 ; perimeter
G1 X169.797 Y78.340 E0.21162 ; perimeter
G1 X183.251 Y67.050 E0.72354 ; perimeter
G1 X192.178 Y77.688 E0.57210 ; perimeter
G1 X170.374 Y95.984 E1.17255 ; perimeter
G1 X125.060 Y95.984 E1.86673 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.770 Y95.657 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y95.984 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.350 F10800.000 ; lift Z
G1 X100.899 Y95.076 ; move to first infill point
G1 Z0.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8055.57
G1 X85.386 Y79.563 E1.01905 ; infill
G1 F8640
G1 X87.714 Y81.890 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.350 F10800.000 ; lift Z
G1 X89.314 Y82.859 ; move to first infill point
G1 Z0.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8055.57
G1 X101.330 Y94.875 E0.78935 ; infill
G1 X101.962 Y94.875 E0.02936 ; infill
G1 X93.848 Y86.761 E0.53300 ; infill
G1 X94.480 Y86.761 E0.02936 ; infill
G1 X102.594 Y94.875 E0.53300 ; infill
G1 X103.226 Y94.875 E0.02936 ; infill
G1 X95.112 Y86.761 E0.53300 ; infill
G1 X95.744 Y86.761 E0.02936 ; infill
G1 X103.858 Y94.875 E0.53300 ; infill
G1 X104.490 Y94.875 E0.02936 ; infill
G1 X96.376 Y86.761 E0.53300 ; infill
G1 X97.008 Y86.761 E0.02936 ; infill
G1 X105.122 Y94.875 E0.53300 ; infill
G1 X105.754 Y94.875 E0.02936 ; infill
G1 X97.641 Y86.761 E0.53300 ; infill
G1 X98.273 Y86.761 E0.02936 ; infill
G1 X106.386 Y94.875 E0.53300 ; infill
G1 X107.018 Y94.875 E0.02936 ; infill
G1 X98.905 Y86.761 E0.53300 ; infill
G1 X99.537 Y86.761 E0.02936 ; infill
G1 X107.650 Y94.875 E0.53300 ; infill
G1 X108.282 Y94.875 E0.02936 ; infill
G1 X100.169 Y86.761 E0.53300 ; infill
G1 X100.801 Y86.761 E0.02936 ; infill
G1 X108.914 Y94.875 E0.53300 ; infill
G1 X109.546 Y94.875 E0.02936 ; infill
G1 X101.433 Y86.761 E0.53300 ; infill
G1 X102.065 Y86.761 E0.02936 ; infill
G1 X110.178 Y94.875 E0.53300 ; infill
G1 X110.810 Y94.875 E0.02936 ; infill
G1 X102.697 Y86.761 E0.53300 ; infill
G1 X103.329 Y86.761 E0.02936 ; infill
G1 X111.442 Y94.875 E0.53300 ; infill
G1 X112.074 Y94.875 E0.02936 ; infill
G1 X103.961 Y86.761 E0.53300 ; infill
G1 X104.593 Y86.761 E0.02936 ; infill
G1 X112.706 Y94.875 E0.53300 ; infill
G1 X113.339 Y94.875 E0.02936 ; infill
G1 X105.225 Y86.761 E0.53300 ; infill
G1 X105.857 Y86.761 E0.02936 ; infill
G1 X113.971 Y94.875 E0.53300 ; infill
G1 X114.603 Y94.875 E0.02936 ; infill
G1 X106.489 Y86.761 E0.53300 ; infill
G1 X107.121 Y86.761 E0.02936 ; infill
G1 X115.235 Y94.875 E0.53300 ; infill
G1 X115.867 Y94.875 E0.02936 ; infill
G1 X107.753 Y86.761 E0.53300 ; infill
G1 X108.385 Y86.761 E0.02936 ; infill
G1 X116.499 Y94.875 E0.53300 ; infill
G1 X117.131 Y94.875 E0.02936 ; infill
G1 X109.017 Y86.761 E0.53300 ; infill
G1 X109.649 Y86.761 E0.02936 ; infill
G1 X117.763 Y94.875 E0.53300 ; infill
G1 X118.395 Y94.875 E0.02936 ; infill
G1 X110.281 Y86.761 E0.53300 ; infill
G1 X110.913 Y86.761 E0.02936 ; infill
G1 X119.027 Y94.875 E0.53300 ; infill
G1 X119.659 Y94.875 E0.02936 ; infill
G1 X111.545 Y86.761 E0.53300 ; infill
G1 X112.177 Y86.761 E0.02936 ; infill
G1 X120.291 Y94.875 E0.53300 ; infill
G1 X120.923 Y94.875 E0.02936 ; infill
G1 X112.809 Y86.761 E0.53300 ; infill
G1 X113.441 Y86.761 E0.02936 ; infill
G1 X121.555 Y94.875 E0.53300 ; infill
G1 X122.187 Y94.875 E0.02936 ; infill
G1 X114.073 Y86.761 E0.53300 ; infill
G1 X114.705 Y86.761 E0.02936 ; infill
G1 X122.819 Y94.875 E0.53300 ; infill
G1 X123.451 Y94.875 E0.02936 ; infill
G1 X115.337 Y86.761 E0.53300 ; infill
G1 X115.969 Y86.761 E0.02936 ; infill
G1 X124.083 Y94.875 E0.53300 ; infill
G1 X124.715 Y94.875 E0.02936 ; infill
G1 X116.601 Y86.761 E0.53300 ; infill
G1 X117.233 Y86.761 E0.02936 ; infill
G1 X125.347 Y94.875 E0.53300 ; infill
G1 X125.979 Y94.875 E0.02936 ; infill
G1 X117.865 Y86.761 E0.53300 ; infill
G1 X118.497 Y86.761 E0.02936 ; infill
G1 X126.611 Y94.875 E0.53300 ; infill
G1 X127.243 Y94.875 E0.02936 ; infill
G1 X119.129 Y86.761 E0.53300 ; infill
G1 X119.761 Y86.761 E0.02936 ; infill
G1 X127.875 Y94.875 E0.53300 ; infill
G1 X128.507 Y94.875 E0.02936 ; infill
G1 X120.393 Y86.761 E0.53300 ; infill
G1 X121.025 Y86.761 E0.02936 ; infill
G1 X129.139 Y94.875 E0.53300 ; infill
G1 X129.771 Y94.875 E0.02936 ; infill
G1 X121.657 Y86.761 E0.53300 ; infill
G1 X122.289 Y86.761 E0.02936 ; infill
G1 X130.403 Y94.875 E0.53300 ; infill
G1 X131.035 Y94.875 E0.02936 ; infill
G1 X122.921 Y86.761 E0.53300 ; infill
G1 X123.553 Y86.761 E0.02936 ; infill
G1 X131.667 Y94.875 E0.53300 ; infill
G1 X132.299 Y94.875 E0.02936 ; infill
G1 X124.185 Y86.761 E0.53300 ; infill
G1 X124.817 Y86.761 E0.02936 ; infill
G1 X132.931 Y94.875 E0.53300 ; infill
G1 X133.563 Y94.875 E0.02936 ; infill
G1 X125.449 Y86.761 E0.53300 ; infill
G1 X126.081 Y86.761 E0.02936 ; infill
G1 X134.195 Y94.875 E0.53300 ; infill
G1 X134.827 Y94.875 E0.02936 ; infill
G1 X126.713 Y86.761 E0.53300 ; infill
G1 X127.345 Y86.761 E0.02936 ; infill
G1 X135.459 Y94.875 E0.53300 ; infill
G1 X136.091 Y94.875 E0.02936 ; infill
G1 X127.977 Y86.761 E0.53300 ; infill
G1 X128.609 Y86.761 E0.02936 ; infill
G1 X136.723 Y94.875 E0.53300 ; infill
G1 X137.355 Y94.875 E0.02936 ; infill
G1 X129.241 Y86.761 E0.53300 ; infill
G1 X129.873 Y86.761 E0.02936 ; infill
G1 X137.987 Y94.875 E0.53300 ; infill
G1 X138.619 Y94.875 E0.02936 ; infill
G1 X130.505 Y86.761 E0.53300 ; infill
G1 X131.137 Y86.761 E0.02936 ; infill
G1 X139.251 Y94.875 E0.53300 ; infill
G1 X139.883 Y94.875 E0.02936 ; infill
G1 X131.769 Y86.761 E0.53300 ; infill
G1 X132.401 Y86.761 E0.02936 ; infill
G1 X140.515 Y94.875 E0.53300 ; infill
G1 X141.147 Y94.875 E0.02936 ; infill
G1 X133.033 Y86.761 E0.53300 ; infill
G1 X133.665 Y86.761 E0.02936 ; infill
G1 X141.779 Y94.875 E0.53300 ; infill
G1 X142.411 Y94.875 E0.02936 ; infill
G1 X134.297 Y86.761 E0.53300 ; infill
G1 X134.929 Y86.761 E0.02936 ; infill
G1 X143.043 Y94.875 E0.53300 ; infill
G1 X143.675 Y94.875 E0.02936 ; infill
G1 X135.561 Y86.761 E0.53300 ; infill
G1 X136.193 Y86.761 E0.02936 ; infill
G1 X144.307 Y94.875 E0.53300 ; infill
G1 X144.939 Y94.875 E0.02936 ; infill
G1 X136.825 Y86.761 E0.53300 ; infill
G1 X137.457 Y86.761 E0.02936 ; infill
G1 X145.571 Y94.875 E0.53300 ; infill
G1 X146.203 Y94.875 E0.02936 ; infill
G1 X138.089 Y86.761 E0.53300 ; infill
G1 X138.721 Y86.761 E0.02936 ; infill
G1 X146.835 Y94.875 E0.53300 ; infill
G1 X147.467 Y94.875 E0.02936 ; infill
G1 X139.353 Y86.761 E0.53300 ; infill
G1 X139.985 Y86.761 E0.02936 ; infill
G1 X148.099 Y94.875 E0.53300 ; infill
G1 X148.731 Y94.875 E0.02936 ; infill
G1 X140.617 Y86.761 E0.53300 ; infill
G1 X141.249 Y86.761 E0.02936 ; infill
G1 X149.363 Y94.875 E0.53300 ; infill
G1 X149.995 Y94.875 E0.02936 ; infill
G1 X141.881 Y86.761 E0.53300 ; infill
G1 X142.513 Y86.761 E0.02936 ; infill
G1 X150.627 Y94.875 E0.53300 ; infill
G1 X151.259 Y94.875 E0.02936 ; infill
G1 X143.145 Y86.761 E0.53300 ; infill
G1 X143.777 Y86.761 E0.02936 ; infill
G1 X151.891 Y94.875 E0.53300 ; infill
G1 X152.523 Y94.875 E0.02936 ; infill
G1 X144.409 Y86.761 E0.53300 ; infill
G1 X145.041 Y86.761 E0.02936 ; infill
G1 X153.155 Y94.875 E0.53300 ; infill
G1 X153.787 Y94.875 E0.02936 ; infill
G1 X145.673 Y86.761 E0.53300 ; infill
G1 X146.305 Y86.761 E0.02936 ; infill
G1 X154.419 Y94.875 E0.53300 ; infill
G1 X155.051 Y94.875 E0.02936 ; infill
G1 X146.937 Y86.761 E0.53300 ; infill
G1 X147.569 Y86.761 E0.02936 ; infill
G1 X155.683 Y94.875 E0.53300 ; infill
G1 X156.315 Y94.875 E0.02936 ; infill
G1 X148.201 Y86.761 E0.53300 ; infill
G1 X148.833 Y86.761 E0.02936 ; infill
G1 X156.947 Y94.875 E0.53300 ; infill
G1 X157.579 Y94.875 E0.02936 ; infill
G1 X149.465 Y86.761 E0.53300 ; infill
G1 X150.097 Y86.761 E0.02936 ; infill
G1 X158.211 Y94.875 E0.53300 ; infill
G1 X158.843 Y94.875 E0.02936 ; infill
G1 X150.729 Y86.761 E0.53300 ; infill
G1 X151.361 Y86.761 E0.02936 ; infill
G1 X159.475 Y94.875 E0.53300 ; infill
G1 X160.107 Y94.875 E0.02936 ; infill
G1 X151.993 Y86.761 E0.53300 ; infill
G1 X152.625 Y86.761 E0.02936 ; infill
G1 X160.739 Y94.875 E0.53300 ; infill
G1 X161.371 Y94.875 E0.02936 ; infill
G1 X153.257 Y86.761 E0.53300 ; infill
G1 X153.889 Y86.761 E0.02936 ; infill
G1 X162.003 Y94.875 E0.53300 ; infill
G1 X162.635 Y94.875 E0.02936 ; infill
G1 X154.521 Y86.761 E0.53300 ; infill
G1 X155.153 Y86.761 E0.02936 ; infill
G1 X163.267 Y94.875 E0.53300 ; infill
G1 X163.899 Y94.875 E0.02936 ; infill
G1 X155.785 Y86.761 E0.53300 ; infill
G1 X156.348 Y86.761 E0.02613 ; infill
G1 X156.385 Y86.730 E0.00229 ; infill
G1 X164.531 Y94.875 E0.53508 ; infill
G1 X165.163 Y94.875 E0.02936 ; infill
G1 X156.729 Y86.441 E0.55402 ; infill
G1 X157.073 Y86.153 E0.02084 ; infill
G1 X165.795 Y94.875 E0.57296 ; infill
G1 X166.427 Y94.875 E0.02936 ; infill
G1 X157.416 Y85.865 E0.59190 ; infill
G1 X157.760 Y85.576 E0.02084 ; infill
G1 X167.059 Y94.875 E0.61085 ; infill
G1 X167.691 Y94.875 E0.02936 ; infill
G1 X158.104 Y85.288 E0.62979 ; infill
G1 X158.447 Y85.000 E0.02084 ; infill
G1 X168.323 Y94.875 E0.64873 ; infill
G1 X168.955 Y94.875 E0.02936 ; infill
G1 X158.791 Y84.711 E0.66767 ; infill
G1 X159.135 Y84.423 E0.02084 ; infill
G1 X169.587 Y94.875 E0.68661 ; infill
G1 X169.970 Y94.875 E0.01779 ; infill
G1 X170.105 Y94.762 E0.00821 ; infill
G1 X159.478 Y84.134 E0.69809 ; infill
G1 X159.822 Y83.846 E0.02084 ; infill
G1 X170.449 Y94.473 E0.69809 ; infill
G1 X170.793 Y94.185 E0.02084 ; infill
G1 X160.166 Y83.558 E0.69809 ; infill
G1 X160.509 Y83.269 E0.02084 ; infill
G1 X171.136 Y93.897 E0.69809 ; infill
G1 X171.480 Y93.608 E0.02084 ; infill
G1 X160.853 Y82.981 E0.69809 ; infill
G1 X161.197 Y82.693 E0.02084 ; infill
G1 X171.824 Y93.320 E0.69809 ; infill
G1 X172.167 Y93.031 E0.02084 ; infill
G1 X161.540 Y82.404 E0.69809 ; infill
G1 X161.884 Y82.116 E0.02084 ; infill
G1 X172.511 Y92.743 E0.69809 ; infill
G1 X172.855 Y92.455 E0.02084 ; infill
G1 X162.227 Y81.828 E0.69809 ; infill
G1 X162.571 Y81.539 E0.02084 ; infill
G1 X173.198 Y92.166 E0.69809 ; infill
G1 X173.542 Y91.878 E0.02084 ; infill
G1 X162.915 Y81.251 E0.69809 ; infill
G1 X163.258 Y80.963 E0.02084 ; infill
G1 X173.886 Y91.590 E0.69809 ; infill
G1 X174.229 Y91.301 E0.02084 ; infill
G1 X163.602 Y80.674 E0.69809 ; infill
G1 X163.946 Y80.386 E0.02084 ; infill
G1 X174.573 Y91.013 E0.69809 ; infill
G1 X174.917 Y90.725 E0.02084 ; infill
G1 X164.289 Y80.097 E0.69809 ; infill
G1 X164.633 Y79.809 E0.02084 ; infill
G1 X175.260 Y90.436 E0.69809 ; infill
G1 X175.604 Y90.148 E0.02084 ; infill
G1 X164.977 Y79.521 E0.69809 ; infill
G1 X165.063 Y79.448 E0.00524 ; infill
G1 X165.536 Y79.448 E0.02198 ; infill
G1 X175.948 Y89.860 E0.68391 ; infill
G1 X176.291 Y89.571 E0.02084 ; infill
G1 X166.168 Y79.448 E0.66497 ; infill
G1 X166.800 Y79.448 E0.02936 ; infill
G1 X176.635 Y89.283 E0.64603 ; infill
G1 X176.978 Y88.994 E0.02084 ; infill
G1 X167.432 Y79.448 E0.62709 ; infill
G1 X168.064 Y79.448 E0.02936 ; infill
G1 X177.322 Y88.706 E0.60815 ; infill
G1 X177.666 Y88.418 E0.02084 ; infill
G1 X168.696 Y79.448 E0.58920 ; infill
G1 X169.328 Y79.448 E0.02936 ; infill
G1 X178.009 Y88.129 E0.57026 ; infill
G1 X178.353 Y87.841 E0.02084 ; infill
G1 X169.960 Y79.448 E0.55132 ; infill
G1 X170.200 Y79.448 E0.01114 ; infill
G1 X170.413 Y79.269 E0.01293 ; infill
G1 X178.697 Y87.553 E0.54413 ; infill
G1 X179.040 Y87.264 E0.02084 ; infill
G1 X170.757 Y78.981 E0.54413 ; infill
G1 X171.101 Y78.693 E0.02084 ; infill
G1 X179.384 Y86.976 E0.54413 ; infill
G1 X179.728 Y86.688 E0.02084 ; infill
G1 X171.444 Y78.404 E0.54413 ; infill
G1 X171.788 Y78.116 E0.02084 ; infill
G1 X180.071 Y86.399 E0.54413 ; infill
G1 X180.415 Y86.111 E0.02084 ; infill
G1 X172.132 Y77.828 E0.54413 ; infill
G1 X172.475 Y77.539 E0.02084 ; infill
G1 X180.759 Y85.823 E0.54413 ; infill
G1 X181.102 Y85.534 E0.02084 ; infill
G1 X172.819 Y77.251 E0.54413 ; infill
G1 X173.163 Y76.962 E0.02084 ; infill
G1 X181.446 Y85.246 E0.54413 ; infill
G1 X181.790 Y84.958 E0.02084 ; infill
G1 X173.506 Y76.674 E0.54413 ; infill
G1 X173.850 Y76.386 E0.02084 ; infill
G1 X182.133 Y84.669 E0.54413 ; infill
G1 X182.477 Y84.381 E0.02084 ; infill
G1 X174.193 Y76.097 E0.54413 ; infill
G1 X174.537 Y75.809 E0.02084 ; infill
G1 X182.821 Y84.092 E0.54413 ; infill
G1 X183.164 Y83.804 E0.02084 ; infill
G1 X174.881 Y75.521 E0.54413 ; infill
G1 X175.224 Y75.232 E0.02084 ; infill
G1 X183.508 Y83.516 E0.54413 ; infill
G1 X183.851 Y83.227 E0.02084 ; infill
G1 X175.568 Y74.944 E0.54413 ; infill
G1 X175.912 Y74.656 E0.02084 ; infill
G1 X184.195 Y82.939 E0.54413 ; infill
G1 X184.539 Y82.651 E0.02084 ; infill
G1 X176.255 Y74.367 E0.54413 ; infill
G1 X176.599 Y74.079 E0.02084 ; infill
G1 X184.882 Y82.362 E0.54413 ; infill
G1 X185.226 Y82.074 E0.02084 ; infill
G1 X176.943 Y73.791 E0.54413 ; infill
G1 X177.286 Y73.502 E0.02084 ; infill
G1 X185.570 Y81.786 E0.54413 ; infill
G1 X185.913 Y81.497 E0.02084 ; infill
G1 X177.630 Y73.214 E0.54413 ; infill
G1 X177.974 Y72.925 E0.02084 ; infill
G1 X186.257 Y81.209 E0.54413 ; infill
G1 X186.601 Y80.921 E0.02084 ; infill
G1 X178.317 Y72.637 E0.54413 ; infill
G1 X178.661 Y72.349 E0.02084 ; infill
G1 X186.944 Y80.632 E0.54413 ; infill
G1 X187.288 Y80.344 E0.02084 ; infill
G1 X179.005 Y72.060 E0.54413 ; infill
G1 X179.348 Y71.772 E0.02084 ; infill
G1 X187.632 Y80.055 E0.54413 ; infill
G1 X187.975 Y79.767 E0.02084 ; infill
G1 X179.692 Y71.484 E0.54413 ; infill
G1 X180.036 Y71.195 E0.02084 ; infill
G1 X188.319 Y79.479 E0.54413 ; infill
G1 X188.663 Y79.190 E0.02084 ; infill
G1 X180.379 Y70.907 E0.54413 ; infill
G1 X180.723 Y70.619 E0.02084 ; infill
G1 X189.006 Y78.902 E0.54413 ; infill
G1 X189.350 Y78.614 E0.02084 ; infill
G1 X181.066 Y70.330 E0.54413 ; infill
G1 X181.410 Y70.042 E0.02084 ; infill
G1 X189.694 Y78.325 E0.54413 ; infill
G1 X190.037 Y78.037 E0.02084 ; infill
G1 X181.754 Y69.754 E0.54413 ; infill
G1 X182.097 Y69.465 E0.02084 ; infill
G1 X190.523 Y77.891 E0.55350 ; infill
G1 X190.867 Y77.603 F10800.000 ; move to first infill point
G1 F8055.57
G1 X182.441 Y69.177 E0.55350 ; infill
G1 X182.785 Y68.888 E0.02084 ; infill
G1 X187.905 Y74.009 E0.33635 ; infill
G1 F8640
G1 X185.578 Y71.681 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.350 F10800.000 ; lift Z
G1 X100.267 Y95.076 ; move to first infill point
G1 Z0.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8055.57
G1 X84.639 Y79.448 E1.02658 ; infill
G1 X84.007 Y79.448 E0.02936 ; infill
G1 X99.434 Y94.875 E1.01339 ; infill
G1 X98.802 Y94.875 E0.02936 ; infill
G1 X83.375 Y79.448 E1.01339 ; infill
G1 X82.743 Y79.448 E0.02936 ; infill
G1 X98.170 Y94.875 E1.01339 ; infill
G1 X97.538 Y94.875 E0.02936 ; infill
G1 X82.111 Y79.448 E1.01339 ; infill
G1 X81.479 Y79.448 E0.02936 ; infill
G1 X96.906 Y94.875 E1.01339 ; infill
G1 X96.274 Y94.875 E0.02936 ; infill
G1 X80.847 Y79.448 E1.01339 ; infill
G1 X80.215 Y79.448 E0.02936 ; infill
G1 X95.642 Y94.875 E1.01339 ; infill
G1 X95.010 Y94.875 E0.02936 ; infill
G1 X76.824 Y76.689 E1.19463 ; infill
G1 F8640
G1 X79.152 Y79.017 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.350 F10800.000 ; lift Z
G1 X72.896 Y73.393 ; move to first infill point
G1 Z0.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8055.57
G1 X94.579 Y95.076 E1.42433 ; infill
M73 Q6 S129
G1 X93.947 Y95.076 F10800.000 ; move to first infill point
G1 F8055.57
G1 X68.968 Y70.097 E1.64084 ; infill
G1 F8640
G1 X71.296 Y72.425 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.350 F10800.000 ; lift Z
G1 X64.781 Y82.342 ; move to first infill point
G1 Z0.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8055.57
G1 X59.661 Y77.222 E0.33633 ; infill
G1 X59.949 Y76.878 E0.02084 ; infill
G1 X68.709 Y85.638 E0.57541 ; infill
G1 F8640
G1 X66.382 Y83.311 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.350 F10800.000 ; lift Z
G1 X72.637 Y88.934 ; move to first infill point
G1 Z0.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8055.57
G1 X60.238 Y76.535 E0.81449 ; infill
M73 P6 R127
G1 X60.526 Y76.191 E0.02084 ; infill
G1 X76.565 Y92.230 E1.05358 ; infill
G1 F8640
G1 X74.237 Y89.902 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.350 F10800.000 ; lift Z
G1 X80.043 Y95.076 ; move to first infill point
G1 Z0.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8055.57
G1 X60.814 Y75.847 E1.26312 ; infill
G1 X61.103 Y75.504 E0.02084 ; infill
G1 X80.474 Y94.875 E1.27250 ; infill
G1 X81.106 Y94.875 E0.02936 ; infill
G1 X61.391 Y75.160 E1.29507 ; infill
G1 X61.679 Y74.816 E0.02084 ; infill
G1 X81.738 Y94.875 E1.31765 ; infill
G1 X82.370 Y94.875 E0.02936 ; infill
G1 X61.968 Y74.473 E1.34022 ; infill
G1 X62.256 Y74.129 E0.02084 ; infill
G1 X83.002 Y94.875 E1.36280 ; infill
G1 X83.634 Y94.875 E0.02936 ; infill
G1 X62.545 Y73.786 E1.38537 ; infill
G1 X62.833 Y73.442 E0.02084 ; infill
G1 X84.266 Y94.875 E1.40794 ; infill
G1 X84.898 Y94.875 E0.02936 ; infill
G1 X63.121 Y73.098 E1.43052 ; infill
G1 X63.410 Y72.755 E0.02084 ; infill
G1 X85.530 Y94.875 E1.45309 ; infill
G1 X86.162 Y94.875 E0.02936 ; infill
G1 X63.698 Y72.411 E1.47567 ; infill
G1 X63.986 Y72.067 E0.02084 ; infill
G1 X86.794 Y94.875 E1.49824 ; infill
G1 X87.426 Y94.875 E0.02936 ; infill
G1 X64.275 Y71.724 E1.52082 ; infill
G1 X64.563 Y71.380 E0.02084 ; infill
G1 X88.058 Y94.875 E1.54339 ; infill
G1 X88.690 Y94.875 E0.02936 ; infill
G1 X64.851 Y71.036 E1.56596 ; infill
G1 X65.140 Y70.693 E0.02084 ; infill
G1 X89.322 Y94.875 E1.58854 ; infill
G1 X89.954 Y94.875 E0.02936 ; infill
G1 X65.428 Y70.349 E1.61111 ; infill
G1 X65.716 Y70.005 E0.02084 ; infill
G1 X90.586 Y94.875 E1.63369 ; infill
G1 X91.218 Y94.875 E0.02936 ; infill
G1 X66.005 Y69.662 E1.65626 ; infill
G1 X66.293 Y69.318 E0.02084 ; infill
G1 X91.850 Y94.875 E1.67883 ; infill
G1 X92.482 Y94.875 E0.02936 ; infill
G1 X66.581 Y68.974 E1.70141 ; infill
G1 X66.870 Y68.631 E0.02084 ; infill
G1 X93.315 Y95.076 E1.73718 ; infill
G1 F8640
G1 X90.988 Y92.749 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.350 F10800.000 ; lift Z
G1 X124.715 Y133.337 ; move to first perimeter point
G1 Z0.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.630 Y133.337 E1.85731 ; perimeter
G1 X58.654 Y115.737 E1.12801 ; perimeter
G1 X66.562 Y106.313 E0.50678 ; perimeter
G1 X79.630 Y117.278 E0.70277 ; perimeter
G1 X84.767 Y117.278 E0.21162 ; perimeter
G1 X93.482 Y124.591 E0.46869 ; perimeter
G1 X155.948 Y124.591 E2.57331 ; perimeter
G1 X164.663 Y117.278 E0.46869 ; perimeter
G1 X169.800 Y117.278 E0.21162 ; perimeter
G1 X182.868 Y106.313 E0.70277 ; perimeter
G1 X190.776 Y115.737 E0.50678 ; perimeter
G1 X169.800 Y133.337 E1.12801 ; perimeter
G1 X124.775 Y133.337 E1.85484 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y133.734 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.485 Y133.734 E1.86326 ; perimeter
G1 X58.096 Y115.786 E1.15028 ; perimeter
G1 X66.513 Y105.755 E0.53944 ; perimeter
G1 X79.774 Y116.882 E0.71315 ; perimeter
G1 X84.911 Y116.882 E0.21162 ; perimeter
G1 X93.626 Y124.195 E0.46869 ; perimeter
G1 X155.803 Y124.195 E2.56142 ; perimeter
G1 X164.519 Y116.882 E0.46869 ; perimeter
G1 X169.656 Y116.882 E0.21162 ; perimeter
G1 X182.917 Y105.755 E0.71316 ; perimeter
G1 X191.334 Y115.786 E0.53944 ; perimeter
G1 X169.944 Y133.734 E1.15028 ; perimeter
G1 X124.775 Y133.734 E1.86079 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y134.130 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.341 Y134.130 E1.86920 ; perimeter
G1 X57.537 Y115.834 E1.17255 ; perimeter
G1 X66.464 Y105.196 E0.57210 ; perimeter
G1 X79.918 Y116.486 E0.72354 ; perimeter
G1 X85.055 Y116.486 E0.21162 ; perimeter
G1 X93.771 Y123.799 E0.46869 ; perimeter
G1 X155.659 Y123.799 E2.54954 ; perimeter
G1 X164.374 Y116.486 E0.46869 ; perimeter
G1 X169.511 Y116.486 E0.21162 ; perimeter
G1 X182.966 Y105.196 E0.72354 ; perimeter
G1 X191.892 Y115.834 E0.57210 ; perimeter
G1 X170.088 Y134.130 E1.17255 ; perimeter
G1 X124.775 Y134.130 E1.86673 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.485 Y133.803 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y134.130 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.350 F10800.000 ; lift Z
G1 X100.614 Y133.222 ; move to first infill point
G1 Z0.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8055.57
G1 X85.101 Y117.709 E1.01905 ; infill
G1 F8640
G1 X87.428 Y120.036 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.350 F10800.000 ; lift Z
G1 X89.029 Y121.005 ; move to first infill point
G1 Z0.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8055.57
G1 X101.045 Y133.021 E0.78935 ; infill
G1 X101.677 Y133.021 E0.02936 ; infill
G1 X93.563 Y124.907 E0.53300 ; infill
G1 X94.195 Y124.907 E0.02936 ; infill
G1 X102.309 Y133.021 E0.53300 ; infill
G1 X102.941 Y133.021 E0.02936 ; infill
G1 X94.827 Y124.907 E0.53300 ; infill
G1 X95.459 Y124.907 E0.02936 ; infill
G1 X103.573 Y133.021 E0.53300 ; infill
G1 X104.205 Y133.021 E0.02936 ; infill
G1 X96.091 Y124.907 E0.53300 ; infill
G1 X96.723 Y124.907 E0.02936 ; infill
G1 X104.837 Y133.021 E0.53300 ; infill
G1 X105.469 Y133.021 E0.02936 ; infill
G1 X97.355 Y124.907 E0.53300 ; infill
G1 X97.987 Y124.907 E0.02936 ; infill
G1 X106.101 Y133.021 E0.53300 ; infill
G1 X106.733 Y133.021 E0.02936 ; infill
G1 X98.619 Y124.907 E0.53300 ; infill
G1 X99.251 Y124.907 E0.02936 ; infill
G1 X107.365 Y133.021 E0.53300 ; infill
G1 X107.997 Y133.021 E0.02936 ; infill
G1 X99.883 Y124.907 E0.53300 ; infill
G1 X100.515 Y124.907 E0.02936 ; infill
G1 X108.629 Y133.021 E0.53300 ; infill
G1 X109.261 Y133.021 E0.02936 ; infill
G1 X101.147 Y124.907 E0.53300 ; infill
G1 X101.779 Y124.907 E0.02936 ; infill
G1 X109.893 Y133.021 E0.53300 ; infill
G1 X110.525 Y133.021 E0.02936 ; infill
G1 X102.411 Y124.907 E0.53300 ; infill
G1 X103.043 Y124.907 E0.02936 ; infill
G1 X111.157 Y133.021 E0.53300 ; infill
G1 X111.789 Y133.021 E0.02936 ; infill
G1 X103.675 Y124.907 E0.53300 ; infill
G1 X104.307 Y124.907 E0.02936 ; infill
G1 X112.421 Y133.021 E0.53300 ; infill
G1 X113.053 Y133.021 E0.02936 ; infill
G1 X104.939 Y124.907 E0.53300 ; infill
G1 X105.571 Y124.907 E0.02936 ; infill
G1 X113.685 Y133.021 E0.53300 ; infill
G1 X114.317 Y133.021 E0.02936 ; infill
G1 X106.203 Y124.907 E0.53300 ; infill
G1 X106.835 Y124.907 E0.02936 ; infill
G1 X114.949 Y133.021 E0.53300 ; infill
G1 X115.581 Y133.021 E0.02936 ; infill
G1 X107.467 Y124.907 E0.53300 ; infill
G1 X108.099 Y124.907 E0.02936 ; infill
G1 X116.213 Y133.021 E0.53300 ; infill
G1 X116.845 Y133.021 E0.02936 ; infill
G1 X108.731 Y124.907 E0.53300 ; infill
G1 X109.363 Y124.907 E0.02936 ; infill
G1 X117.477 Y133.021 E0.53300 ; infill
G1 X118.109 Y133.021 E0.02936 ; infill
G1 X109.995 Y124.907 E0.53300 ; infill
G1 X110.627 Y124.907 E0.02936 ; infill
G1 X118.741 Y133.021 E0.53300 ; infill
G1 X119.373 Y133.021 E0.02936 ; infill
G1 X111.259 Y124.907 E0.53300 ; infill
G1 X111.891 Y124.907 E0.02936 ; infill
G1 X120.005 Y133.021 E0.53300 ; infill
G1 X120.637 Y133.021 E0.02936 ; infill
G1 X112.523 Y124.907 E0.53300 ; infill
G1 X113.155 Y124.907 E0.02936 ; infill
G1 X121.269 Y133.021 E0.53300 ; infill
G1 X121.901 Y133.021 E0.02936 ; infill
G1 X113.787 Y124.907 E0.53300 ; infill
G1 X114.419 Y124.907 E0.02936 ; infill
G1 X122.533 Y133.021 E0.53300 ; infill
G1 X123.165 Y133.021 E0.02936 ; infill
G1 X115.052 Y124.907 E0.53300 ; infill
G1 X115.684 Y124.907 E0.02936 ; infill
G1 X123.797 Y133.021 E0.53300 ; infill
G1 X124.429 Y133.021 E0.02936 ; infill
G1 X116.316 Y124.907 E0.53300 ; infill
G1 X116.948 Y124.907 E0.02936 ; infill
G1 X125.061 Y133.021 E0.53300 ; infill
G1 X125.693 Y133.021 E0.02936 ; infill
G1 X117.580 Y124.907 E0.53300 ; infill
G1 X118.212 Y124.907 E0.02936 ; infill
G1 X126.325 Y133.021 E0.53300 ; infill
G1 X126.957 Y133.021 E0.02936 ; infill
G1 X118.844 Y124.907 E0.53300 ; infill
G1 X119.476 Y124.907 E0.02936 ; infill
G1 X127.589 Y133.021 E0.53300 ; infill
G1 X128.221 Y133.021 E0.02936 ; infill
G1 X120.108 Y124.907 E0.53300 ; infill
G1 X120.740 Y124.907 E0.02936 ; infill
G1 X128.853 Y133.021 E0.53300 ; infill
G1 X129.485 Y133.021 E0.02936 ; infill
G1 X121.372 Y124.907 E0.53300 ; infill
G1 X122.004 Y124.907 E0.02936 ; infill
G1 X130.117 Y133.021 E0.53300 ; infill
G1 X130.750 Y133.021 E0.02936 ; infill
G1 X122.636 Y124.907 E0.53300 ; infill
G1 X123.268 Y124.907 E0.02936 ; infill
G1 X131.382 Y133.021 E0.53300 ; infill
G1 X132.014 Y133.021 E0.02936 ; infill
G1 X123.900 Y124.907 E0.53300 ; infill
G1 X124.532 Y124.907 E0.02936 ; infill
G1 X132.646 Y133.021 E0.53300 ; infill
G1 X133.278 Y133.021 E0.02936 ; infill
G1 X125.164 Y124.907 E0.53300 ; infill
G1 X125.796 Y124.907 E0.02936 ; infill
G1 X133.910 Y133.021 E0.53300 ; infill
G1 X134.542 Y133.021 E0.02936 ; infill
G1 X126.428 Y124.907 E0.53300 ; infill
G1 X127.060 Y124.907 E0.02936 ; infill
G1 X135.174 Y133.021 E0.53300 ; infill
G1 X135.806 Y133.021 E0.02936 ; infill
G1 X127.692 Y124.907 E0.53300 ; infill
G1 X128.324 Y124.907 E0.02936 ; infill
G1 X136.438 Y133.021 E0.53300 ; infill
G1 X137.070 Y133.021 E0.02936 ; infill
G1 X128.956 Y124.907 E0.53300 ; infill
G1 X129.588 Y124.907 E0.02936 ; infill
G1 X137.702 Y133.021 E0.53300 ; infill
G1 X138.334 Y133.021 E0.02936 ; infill
G1 X130.220 Y124.907 E0.53300 ; infill
G1 X130.852 Y124.907 E0.02936 ; infill
G1 X138.966 Y133.021 E0.53300 ; infill
G1 X139.598 Y133.021 E0.02936 ; infill
G1 X131.484 Y124.907 E0.53300 ; infill
G1 X132.116 Y124.907 E0.02936 ; infill
G1 X140.230 Y133.021 E0.53300 ; infill
G1 X140.862 Y133.021 E0.02936 ; infill
G1 X132.748 Y124.907 E0.53300 ; infill
G1 X133.380 Y124.907 E0.02936 ; infill
G1 X141.494 Y133.021 E0.53300 ; infill
G1 X142.126 Y133.021 E0.02936 ; infill
G1 X134.012 Y124.907 E0.53300 ; infill
G1 X134.644 Y124.907 E0.02936 ; infill
G1 X142.758 Y133.021 E0.53300 ; infill
G1 X143.390 Y133.021 E0.02936 ; infill
G1 X135.276 Y124.907 E0.53300 ; infill
G1 X135.908 Y124.907 E0.02936 ; infill
G1 X144.022 Y133.021 E0.53300 ; infill
G1 X144.654 Y133.021 E0.02936 ; infill
G1 X136.540 Y124.907 E0.53300 ; infill
G1 X137.172 Y124.907 E0.02936 ; infill
G1 X145.286 Y133.021 E0.53300 ; infill
G1 X145.918 Y133.021 E0.02936 ; infill
G1 X137.804 Y124.907 E0.53300 ; infill
G1 X138.436 Y124.907 E0.02936 ; infill
G1 X146.550 Y133.021 E0.53300 ; infill
G1 X147.182 Y133.021 E0.02936 ; infill
G1 X139.068 Y124.907 E0.53300 ; infill
G1 X139.700 Y124.907 E0.02936 ; infill
G1 X147.814 Y133.021 E0.53300 ; infill
G1 X148.446 Y133.021 E0.02936 ; infill
G1 X140.332 Y124.907 E0.53300 ; infill
G1 X140.964 Y124.907 E0.02936 ; infill
G1 X149.078 Y133.021 E0.53300 ; infill
G1 X149.710 Y133.021 E0.02936 ; infill
G1 X141.596 Y124.907 E0.53300 ; infill
G1 X142.228 Y124.907 E0.02936 ; infill
G1 X150.342 Y133.021 E0.53300 ; infill
G1 X150.974 Y133.021 E0.02936 ; infill
G1 X142.860 Y124.907 E0.53300 ; infill
G1 X143.492 Y124.907 E0.02936 ; infill
G1 X151.606 Y133.021 E0.53300 ; infill
G1 X152.238 Y133.021 E0.02936 ; infill
G1 X144.124 Y124.907 E0.53300 ; infill
G1 X144.756 Y124.907 E0.02936 ; infill
G1 X152.870 Y133.021 E0.53300 ; infill
G1 X153.502 Y133.021 E0.02936 ; infill
G1 X145.388 Y124.907 E0.53300 ; infill
G1 X146.020 Y124.907 E0.02936 ; infill
G1 X154.134 Y133.021 E0.53300 ; infill
G1 X154.766 Y133.021 E0.02936 ; infill
G1 X146.652 Y124.907 E0.53300 ; infill
G1 X147.284 Y124.907 E0.02936 ; infill
G1 X155.398 Y133.021 E0.53300 ; infill
G1 X156.030 Y133.021 E0.02936 ; infill
G1 X147.916 Y124.907 E0.53300 ; infill
G1 X148.548 Y124.907 E0.02936 ; infill
G1 X156.662 Y133.021 E0.53300 ; infill
G1 X157.294 Y133.021 E0.02936 ; infill
G1 X149.180 Y124.907 E0.53300 ; infill
G1 X149.812 Y124.907 E0.02936 ; infill
G1 X157.926 Y133.021 E0.53300 ; infill
G1 X158.558 Y133.021 E0.02936 ; infill
G1 X150.444 Y124.907 E0.53300 ; infill
G1 X151.076 Y124.907 E0.02936 ; infill
G1 X159.190 Y133.021 E0.53300 ; infill
G1 X159.822 Y133.021 E0.02936 ; infill
G1 X151.708 Y124.907 E0.53300 ; infill
G1 X152.340 Y124.907 E0.02936 ; infill
G1 X160.454 Y133.021 E0.53300 ; infill
G1 X161.086 Y133.021 E0.02936 ; infill
G1 X152.972 Y124.907 E0.53300 ; infill
G1 X153.604 Y124.907 E0.02936 ; infill
G1 X161.718 Y133.021 E0.53300 ; infill
G1 X162.350 Y133.021 E0.02936 ; infill
G1 X154.236 Y124.907 E0.53300 ; infill
G1 X154.868 Y124.907 E0.02936 ; infill
G1 X162.982 Y133.021 E0.53300 ; infill
G1 X163.614 Y133.021 E0.02936 ; infill
G1 X155.500 Y124.907 E0.53300 ; infill
G1 X156.063 Y124.907 E0.02613 ; infill
G1 X156.100 Y124.876 E0.00229 ; infill
G1 X164.246 Y133.021 E0.53508 ; infill
G1 X164.878 Y133.021 E0.02936 ; infill
G1 X156.444 Y124.587 E0.55402 ; infill
G1 X156.788 Y124.299 E0.02084 ; infill
G1 X165.510 Y133.021 E0.57296 ; infill
G1 X166.142 Y133.021 E0.02936 ; infill
G1 X157.131 Y124.011 E0.59190 ; infill
G1 X157.475 Y123.722 E0.02084 ; infill
G1 X166.774 Y133.021 E0.61085 ; infill
G1 X167.406 Y133.021 E0.02936 ; infill
G1 X157.819 Y123.434 E0.62979 ; infill
G1 X158.162 Y123.146 E0.02084 ; infill
G1 X168.038 Y133.021 E0.64873 ; infill
G1 X168.670 Y133.021 E0.02936 ; infill
G1 X158.506 Y122.857 E0.66767 ; infill
G1 X158.849 Y122.569 E0.02084 ; infill
G1 X169.302 Y133.021 E0.68661 ; infill
G1 X169.685 Y133.021 E0.01779 ; infill
G1 X169.820 Y132.908 E0.00821 ; infill
G1 X159.193 Y122.281 E0.69809 ; infill
G1 X159.537 Y121.992 E0.02084 ; infill
G1 X170.164 Y132.619 E0.69809 ; infill
G1 X170.508 Y132.331 E0.02084 ; infill
G1 X159.880 Y121.704 E0.69809 ; infill
G1 X160.224 Y121.416 E0.02084 ; infill
G1 X170.851 Y132.043 E0.69809 ; infill
G1 X171.195 Y131.754 E0.02084 ; infill
G1 X160.568 Y121.127 E0.69809 ; infill
G1 X160.911 Y120.839 E0.02084 ; infill
G1 X171.539 Y131.466 E0.69809 ; infill
G1 X171.882 Y131.178 E0.02084 ; infill
G1 X161.255 Y120.550 E0.69809 ; infill
G1 X161.599 Y120.262 E0.02084 ; infill
G1 X172.226 Y130.889 E0.69809 ; infill
G1 X172.569 Y130.601 E0.02084 ; infill
G1 X161.942 Y119.974 E0.69809 ; infill
G1 X162.286 Y119.685 E0.02084 ; infill
G1 X172.913 Y130.313 E0.69809 ; infill
G1 X173.257 Y130.024 E0.02084 ; infill
G1 X162.630 Y119.397 E0.69809 ; infill
G1 X162.973 Y119.109 E0.02084 ; infill
G1 X173.600 Y129.736 E0.69809 ; infill
G1 X173.944 Y129.447 E0.02084 ; infill
G1 X163.317 Y118.820 E0.69809 ; infill
G1 X163.661 Y118.532 E0.02084 ; infill
G1 X174.288 Y129.159 E0.69809 ; infill
G1 X174.631 Y128.871 E0.02084 ; infill
G1 X164.004 Y118.244 E0.69809 ; infill
G1 X164.348 Y117.955 E0.02084 ; infill
G1 X174.975 Y128.582 E0.69809 ; infill
G1 X175.319 Y128.294 E0.02084 ; infill
G1 X164.692 Y117.667 E0.69809 ; infill
G1 X164.778 Y117.594 E0.00524 ; infill
G1 X165.251 Y117.594 E0.02198 ; infill
G1 X175.662 Y128.006 E0.68391 ; infill
G1 X176.006 Y127.717 E0.02084 ; infill
G1 X165.883 Y117.594 E0.66497 ; infill
G1 X166.515 Y117.594 E0.02936 ; infill
G1 X176.350 Y127.429 E0.64603 ; infill
G1 X176.693 Y127.141 E0.02084 ; infill
G1 X167.147 Y117.594 E0.62709 ; infill
G1 X167.779 Y117.594 E0.02936 ; infill
G1 X177.037 Y126.852 E0.60815 ; infill
G1 X177.381 Y126.564 E0.02084 ; infill
G1 X168.411 Y117.594 E0.58920 ; infill
G1 X169.043 Y117.594 E0.02936 ; infill
G1 X177.724 Y126.276 E0.57026 ; infill
G1 X178.068 Y125.987 E0.02084 ; infill
G1 X169.675 Y117.594 E0.55132 ; infill
G1 X169.915 Y117.594 E0.01114 ; infill
G1 X170.128 Y117.415 E0.01293 ; infill
G1 X178.412 Y125.699 E0.54413 ; infill
M73 Q7 S128
G1 X178.755 Y125.411 E0.02084 ; infill
G1 X170.472 Y117.127 E0.54413 ; infill
G1 X170.815 Y116.839 E0.02084 ; infill
G1 X179.099 Y125.122 E0.54413 ; infill
G1 X179.442 Y124.834 E0.02084 ; infill
G1 X171.159 Y116.550 E0.54413 ; infill
G1 X171.503 Y116.262 E0.02084 ; infill
G1 X179.786 Y124.545 E0.54413 ; infill
G1 X180.130 Y124.257 E0.02084 ; infill
G1 X171.846 Y115.974 E0.54413 ; infill
G1 X172.190 Y115.685 E0.02084 ; infill
G1 X180.473 Y123.969 E0.54413 ; infill
G1 X180.817 Y123.680 E0.02084 ; infill
G1 X172.534 Y115.397 E0.54413 ; infill
G1 X172.877 Y115.109 E0.02084 ; infill
G1 X181.161 Y123.392 E0.54413 ; infill
G1 X181.504 Y123.104 E0.02084 ; infill
G1 X173.221 Y114.820 E0.54413 ; infill
M73 P7 R126
G1 X173.565 Y114.532 E0.02084 ; infill
G1 X181.848 Y122.815 E0.54413 ; infill
G1 X182.192 Y122.527 E0.02084 ; infill
G1 X173.908 Y114.244 E0.54413 ; infill
G1 X174.252 Y113.955 E0.02084 ; infill
G1 X182.535 Y122.239 E0.54413 ; infill
G1 X182.879 Y121.950 E0.02084 ; infill
G1 X174.596 Y113.667 E0.54413 ; infill
G1 X174.939 Y113.378 E0.02084 ; infill
G1 X183.223 Y121.662 E0.54413 ; infill
G1 X183.566 Y121.374 E0.02084 ; infill
G1 X175.283 Y113.090 E0.54413 ; infill
G1 X175.627 Y112.802 E0.02084 ; infill
G1 X183.910 Y121.085 E0.54413 ; infill
G1 X184.254 Y120.797 E0.02084 ; infill
G1 X175.970 Y112.513 E0.54413 ; infill
G1 X176.314 Y112.225 E0.02084 ; infill
G1 X184.597 Y120.508 E0.54413 ; infill
G1 X184.941 Y120.220 E0.02084 ; infill
G1 X176.657 Y111.937 E0.54413 ; infill
G1 X177.001 Y111.648 E0.02084 ; infill
G1 X185.285 Y119.932 E0.54413 ; infill
G1 X185.628 Y119.643 E0.02084 ; infill
G1 X177.345 Y111.360 E0.54413 ; infill
G1 X177.688 Y111.072 E0.02084 ; infill
G1 X185.972 Y119.355 E0.54413 ; infill
G1 X186.315 Y119.067 E0.02084 ; infill
G1 X178.032 Y110.783 E0.54413 ; infill
G1 X178.376 Y110.495 E0.02084 ; infill
G1 X186.659 Y118.778 E0.54413 ; infill
G1 X187.003 Y118.490 E0.02084 ; infill
G1 X178.719 Y110.207 E0.54413 ; infill
G1 X179.063 Y109.918 E0.02084 ; infill
G1 X187.346 Y118.202 E0.54413 ; infill
G1 X187.690 Y117.913 E0.02084 ; infill
G1 X179.407 Y109.630 E0.54413 ; infill
G1 X179.750 Y109.341 E0.02084 ; infill
G1 X188.034 Y117.625 E0.54413 ; infill
G1 X188.377 Y117.337 E0.02084 ; infill
G1 X180.094 Y109.053 E0.54413 ; infill
G1 X180.438 Y108.765 E0.02084 ; infill
G1 X188.721 Y117.048 E0.54413 ; infill
G1 X189.065 Y116.760 E0.02084 ; infill
G1 X180.781 Y108.476 E0.54413 ; infill
G1 X181.125 Y108.188 E0.02084 ; infill
G1 X189.408 Y116.471 E0.54413 ; infill
G1 X189.752 Y116.183 E0.02084 ; infill
G1 X181.469 Y107.900 E0.54413 ; infill
G1 X181.812 Y107.611 E0.02084 ; infill
G1 X190.238 Y116.037 E0.55350 ; infill
G1 X190.582 Y115.749 F10800.000 ; move to first infill point
G1 F8055.57
G1 X182.156 Y107.323 E0.55350 ; infill
G1 X182.500 Y107.035 E0.02084 ; infill
G1 X187.620 Y112.155 E0.33635 ; infill
G1 F8640
G1 X185.292 Y109.828 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.350 F10800.000 ; lift Z
G1 X99.982 Y133.222 ; move to first infill point
G1 Z0.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8055.57
G1 X84.354 Y117.594 E1.02658 ; infill
G1 X83.722 Y117.594 E0.02936 ; infill
G1 X99.149 Y133.021 E1.01339 ; infill
G1 X98.517 Y133.021 E0.02936 ; infill
G1 X83.090 Y117.594 E1.01339 ; infill
G1 X82.458 Y117.594 E0.02936 ; infill
G1 X97.885 Y133.021 E1.01339 ; infill
G1 X97.253 Y133.021 E0.02936 ; infill
G1 X81.826 Y117.594 E1.01339 ; infill
G1 X81.194 Y117.594 E0.02936 ; infill
G1 X96.621 Y133.021 E1.01339 ; infill
G1 X95.989 Y133.021 E0.02936 ; infill
G1 X80.562 Y117.594 E1.01339 ; infill
G1 X79.930 Y117.594 E0.02936 ; infill
G1 X95.357 Y133.021 E1.01339 ; infill
G1 X94.725 Y133.021 E0.02936 ; infill
G1 X76.539 Y114.835 E1.19463 ; infill
G1 F8640
G1 X78.866 Y117.163 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.350 F10800.000 ; lift Z
G1 X72.611 Y111.539 ; move to first infill point
G1 Z0.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8055.57
G1 X94.294 Y133.222 E1.42433 ; infill
G1 X93.662 Y133.222 F10800.000 ; move to first infill point
G1 F8055.57
G1 X68.683 Y108.243 E1.64084 ; infill
G1 F8640
G1 X71.011 Y110.571 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.350 F10800.000 ; lift Z
G1 X64.496 Y120.488 ; move to first infill point
G1 Z0.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8055.57
G1 X59.376 Y115.368 E0.33633 ; infill
G1 X59.664 Y115.025 E0.02084 ; infill
G1 X68.424 Y123.784 E0.57541 ; infill
G1 F8640
G1 X66.096 Y121.457 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.350 F10800.000 ; lift Z
G1 X72.352 Y127.080 ; move to first infill point
G1 Z0.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8055.57
G1 X59.952 Y114.681 E0.81449 ; infill
G1 X60.241 Y114.337 E0.02084 ; infill
G1 X76.280 Y130.376 E1.05358 ; infill
G1 F8640
G1 X73.952 Y128.049 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.350 F10800.000 ; lift Z
G1 X79.758 Y133.222 ; move to first infill point
G1 Z0.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8055.57
G1 X60.529 Y113.994 E1.26312 ; infill
G1 X60.818 Y113.650 E0.02084 ; infill
G1 X80.189 Y133.021 E1.27250 ; infill
G1 X80.821 Y133.021 E0.02936 ; infill
G1 X61.106 Y113.306 E1.29507 ; infill
G1 X61.394 Y112.963 E0.02084 ; infill
G1 X81.453 Y133.021 E1.31765 ; infill
G1 X82.085 Y133.021 E0.02936 ; infill
G1 X61.683 Y112.619 E1.34022 ; infill
G1 X61.971 Y112.275 E0.02084 ; infill
G1 X82.717 Y133.021 E1.36280 ; infill
G1 X83.349 Y133.021 E0.02936 ; infill
G1 X62.259 Y111.932 E1.38537 ; infill
G1 X62.548 Y111.588 E0.02084 ; infill
G1 X83.981 Y133.021 E1.40794 ; infill
G1 X84.613 Y133.021 E0.02936 ; infill
G1 X62.836 Y111.244 E1.43052 ; infill
G1 X63.124 Y110.901 E0.02084 ; infill
G1 X85.245 Y133.021 E1.45309 ; infill
G1 X85.877 Y133.021 E0.02936 ; infill
G1 X63.413 Y110.557 E1.47567 ; infill
G1 X63.701 Y110.213 E0.02084 ; infill
G1 X86.509 Y133.021 E1.49824 ; infill
G1 X87.141 Y133.021 E0.02936 ; infill
G1 X63.989 Y109.870 E1.52082 ; infill
G1 X64.278 Y109.526 E0.02084 ; infill
G1 X87.773 Y133.021 E1.54339 ; infill
G1 X88.405 Y133.021 E0.02936 ; infill
G1 X64.566 Y109.182 E1.56596 ; infill
G1 X64.855 Y108.839 E0.02084 ; infill
G1 X89.037 Y133.021 E1.58854 ; infill
G1 X89.669 Y133.021 E0.02936 ; infill
G1 X65.143 Y108.495 E1.61111 ; infill
G1 X65.431 Y108.152 E0.02084 ; infill
G1 X90.301 Y133.021 E1.63369 ; infill
G1 X90.933 Y133.021 E0.02936 ; infill
G1 X65.720 Y107.808 E1.65626 ; infill
G1 X66.008 Y107.464 E0.02084 ; infill
G1 X91.565 Y133.021 E1.67883 ; infill
G1 X92.197 Y133.021 E0.02936 ; infill
G1 X66.296 Y107.121 E1.70141 ; infill
G1 X66.585 Y106.777 E0.02084 ; infill
G1 X93.030 Y133.222 E1.73718 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;1


G1 F8640
G1 X90.703 Y130.895 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;1
G1 X125.000 Y95.366 ; move to first perimeter point
G1 Z1.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.851 Y95.366 E1.85994 ; perimeter
G1 X58.693 Y77.612 E1.13785 ; perimeter
G1 X66.825 Y67.920 E0.52121 ; perimeter
G1 X79.979 Y78.957 E0.70736 ; perimeter
G1 X85.116 Y78.957 E0.21162 ; perimeter
G1 X93.831 Y86.270 E0.46869 ; perimeter
G1 X156.169 Y86.270 E2.56806 ; perimeter
G1 X164.884 Y78.957 E0.46869 ; perimeter
G1 X170.021 Y78.957 E0.21162 ; perimeter
G1 X183.175 Y67.920 E0.70736 ; perimeter
G1 X191.307 Y77.612 E0.52121 ; perimeter
G1 X170.149 Y95.366 E1.13785 ; perimeter
G1 X125.060 Y95.366 E1.85747 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y95.763 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.707 Y95.763 E1.86588 ; perimeter
G1 X58.134 Y77.661 E1.16012 ; perimeter
G1 X66.776 Y67.362 E0.55386 ; perimeter
G1 X80.123 Y78.561 E0.71774 ; perimeter
G1 X85.260 Y78.561 E0.21162 ; perimeter
G1 X93.975 Y85.874 E0.46869 ; perimeter
G1 X156.025 Y85.874 E2.55617 ; perimeter
G1 X164.740 Y78.561 E0.46869 ; perimeter
G1 X169.877 Y78.561 E0.21162 ; perimeter
G1 X183.224 Y67.362 E0.71774 ; perimeter
G1 X191.866 Y77.661 E0.55386 ; perimeter
G1 X170.293 Y95.763 E1.16012 ; perimeter
G1 X125.060 Y95.763 E1.86341 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y96.159 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.563 Y96.159 E1.87182 ; perimeter
G1 X57.576 Y77.710 E1.18239 ; perimeter
G1 X66.727 Y66.803 E0.58652 ; perimeter
G1 X80.267 Y78.165 E0.72813 ; perimeter
G1 X85.404 Y78.165 E0.21162 ; perimeter
G1 X94.120 Y85.478 E0.46869 ; perimeter
G1 X155.880 Y85.478 E2.54429 ; perimeter
G1 X164.596 Y78.165 E0.46869 ; perimeter
G1 X169.733 Y78.165 E0.21162 ; perimeter
G1 X183.273 Y66.803 E0.72813 ; perimeter
G1 X192.424 Y77.710 E0.58652 ; perimeter
G1 X170.437 Y96.159 E1.18239 ; perimeter
G1 X125.060 Y96.159 E1.86935 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.770 Y95.832 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y96.159 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.600 F10800.000 ; lift Z
G1 X147.317 Y95.251 ; move to first infill point
G1 Z1.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8061.32
G1 X155.981 Y86.586 E0.56878 ; infill
G1 X155.350 Y86.586 E0.02931 ; infill
G1 X146.886 Y95.050 E0.55560 ; infill
G1 X146.254 Y95.050 E0.02931 ; infill
G1 X154.718 Y86.586 E0.55560 ; infill
G1 X154.087 Y86.586 E0.02931 ; infill
G1 X145.623 Y95.050 E0.55560 ; infill
G1 X144.991 Y95.050 E0.02931 ; infill
G1 X153.455 Y86.586 E0.55560 ; infill
G1 X152.824 Y86.586 E0.02931 ; infill
G1 X144.360 Y95.050 E0.55560 ; infill
G1 X143.728 Y95.050 E0.02931 ; infill
G1 X152.192 Y86.586 E0.55560 ; infill
G1 X151.561 Y86.586 E0.02931 ; infill
G1 X143.097 Y95.050 E0.55560 ; infill
G1 X142.465 Y95.050 E0.02931 ; infill
G1 X150.929 Y86.586 E0.55560 ; infill
G1 X150.297 Y86.586 E0.02931 ; infill
G1 X141.833 Y95.050 E0.55560 ; infill
G1 X141.202 Y95.050 E0.02931 ; infill
G1 X149.666 Y86.586 E0.55560 ; infill
G1 X149.034 Y86.586 E0.02931 ; infill
G1 X140.570 Y95.050 E0.55560 ; infill
G1 X139.939 Y95.050 E0.02931 ; infill
G1 X148.403 Y86.586 E0.55560 ; infill
G1 X147.771 Y86.586 E0.02931 ; infill
G1 X139.307 Y95.050 E0.55560 ; infill
G1 X138.676 Y95.050 E0.02931 ; infill
G1 X147.140 Y86.586 E0.55560 ; infill
G1 X146.508 Y86.586 E0.02931 ; infill
G1 X138.044 Y95.050 E0.55560 ; infill
G1 X137.413 Y95.050 E0.02931 ; infill
G1 X145.877 Y86.586 E0.55560 ; infill
G1 X145.245 Y86.586 E0.02931 ; infill
G1 X136.781 Y95.050 E0.55560 ; infill
G1 X136.149 Y95.050 E0.02931 ; infill
G1 X144.613 Y86.586 E0.55560 ; infill
G1 X143.982 Y86.586 E0.02931 ; infill
G1 X135.518 Y95.050 E0.55560 ; infill
G1 X134.886 Y95.050 E0.02931 ; infill
G1 X143.350 Y86.586 E0.55560 ; infill
G1 X142.719 Y86.586 E0.02931 ; infill
G1 X134.255 Y95.050 E0.55560 ; infill
G1 X133.623 Y95.050 E0.02931 ; infill
G1 X142.087 Y86.586 E0.55560 ; infill
G1 X141.456 Y86.586 E0.02931 ; infill
G1 X132.992 Y95.050 E0.55560 ; infill
G1 X132.360 Y95.050 E0.02931 ; infill
G1 X140.824 Y86.586 E0.55560 ; infill
G1 X140.193 Y86.586 E0.02931 ; infill
G1 X131.729 Y95.050 E0.55560 ; infill
G1 X131.097 Y95.050 E0.02931 ; infill
G1 X139.561 Y86.586 E0.55560 ; infill
G1 X138.929 Y86.586 E0.02931 ; infill
G1 X130.465 Y95.050 E0.55560 ; infill
G1 X129.834 Y95.050 E0.02931 ; infill
G1 X138.298 Y86.586 E0.55560 ; infill
G1 X137.666 Y86.586 E0.02931 ; infill
G1 X129.202 Y95.050 E0.55560 ; infill
G1 X128.571 Y95.050 E0.02931 ; infill
G1 X137.035 Y86.586 E0.55560 ; infill
G1 X136.403 Y86.586 E0.02931 ; infill
G1 X127.939 Y95.050 E0.55560 ; infill
G1 X127.308 Y95.050 E0.02931 ; infill
G1 X135.772 Y86.586 E0.55560 ; infill
G1 X135.140 Y86.586 E0.02931 ; infill
G1 X126.676 Y95.050 E0.55560 ; infill
G1 X126.045 Y95.050 E0.02931 ; infill
G1 X134.509 Y86.586 E0.55560 ; infill
G1 X133.877 Y86.586 E0.02931 ; infill
G1 X125.413 Y95.050 E0.55560 ; infill
G1 X124.781 Y95.050 E0.02931 ; infill
G1 X133.245 Y86.586 E0.55560 ; infill
G1 X132.614 Y86.586 E0.02931 ; infill
G1 X124.150 Y95.050 E0.55560 ; infill
G1 X123.518 Y95.050 E0.02931 ; infill
G1 X131.982 Y86.586 E0.55560 ; infill
G1 X131.351 Y86.586 E0.02931 ; infill
G1 X122.887 Y95.050 E0.55560 ; infill
G1 X122.255 Y95.050 E0.02931 ; infill
G1 X130.719 Y86.586 E0.55560 ; infill
G1 X130.088 Y86.586 E0.02931 ; infill
G1 X121.624 Y95.050 E0.55560 ; infill
G1 X120.992 Y95.050 E0.02931 ; infill
G1 X129.456 Y86.586 E0.55560 ; infill
G1 X128.825 Y86.586 E0.02931 ; infill
G1 X120.361 Y95.050 E0.55560 ; infill
G1 X119.729 Y95.050 E0.02931 ; infill
G1 X128.193 Y86.586 E0.55560 ; infill
G1 X127.561 Y86.586 E0.02931 ; infill
G1 X119.097 Y95.050 E0.55560 ; infill
G1 X118.466 Y95.050 E0.02931 ; infill
G1 X126.930 Y86.586 E0.55560 ; infill
G1 X126.298 Y86.586 E0.02931 ; infill
G1 X117.834 Y95.050 E0.55560 ; infill
G1 X117.203 Y95.050 E0.02931 ; infill
G1 X125.667 Y86.586 E0.55560 ; infill
G1 X125.035 Y86.586 E0.02931 ; infill
G1 X116.571 Y95.050 E0.55560 ; infill
G1 X115.940 Y95.050 E0.02931 ; infill
G1 X124.404 Y86.586 E0.55560 ; infill
G1 X123.772 Y86.586 E0.02931 ; infill
G1 X115.308 Y95.050 E0.55560 ; infill
G1 X114.677 Y95.050 E0.02931 ; infill
G1 X123.141 Y86.586 E0.55560 ; infill
G1 X122.509 Y86.586 E0.02931 ; infill
G1 X114.045 Y95.050 E0.55560 ; infill
G1 X113.413 Y95.050 E0.02931 ; infill
G1 X121.877 Y86.586 E0.55560 ; infill
G1 X121.246 Y86.586 E0.02931 ; infill
G1 X112.782 Y95.050 E0.55560 ; infill
G1 X112.150 Y95.050 E0.02931 ; infill
G1 X120.614 Y86.586 E0.55560 ; infill
G1 X119.983 Y86.586 E0.02931 ; infill
G1 X111.519 Y95.050 E0.55560 ; infill
G1 X110.887 Y95.050 E0.02931 ; infill
G1 X119.351 Y86.586 E0.55560 ; infill
G1 X118.720 Y86.586 E0.02931 ; infill
G1 X110.256 Y95.050 E0.55560 ; infill
G1 X109.624 Y95.050 E0.02931 ; infill
G1 X118.088 Y86.586 E0.55560 ; infill
G1 X117.457 Y86.586 E0.02931 ; infill
G1 X108.993 Y95.050 E0.55560 ; infill
G1 X108.361 Y95.050 E0.02931 ; infill
G1 X116.825 Y86.586 E0.55560 ; infill
G1 X116.193 Y86.586 E0.02931 ; infill
G1 X107.729 Y95.050 E0.55560 ; infill
G1 X107.098 Y95.050 E0.02931 ; infill
G1 X115.562 Y86.586 E0.55560 ; infill
G1 X114.930 Y86.586 E0.02931 ; infill
G1 X106.466 Y95.050 E0.55560 ; infill
G1 X105.835 Y95.050 E0.02931 ; infill
G1 X114.299 Y86.586 E0.55560 ; infill
G1 X113.667 Y86.586 E0.02931 ; infill
G1 X105.203 Y95.050 E0.55560 ; infill
G1 X104.572 Y95.050 E0.02931 ; infill
G1 X113.036 Y86.586 E0.55560 ; infill
G1 X112.404 Y86.586 E0.02931 ; infill
G1 X103.940 Y95.050 E0.55560 ; infill
G1 X103.309 Y95.050 E0.02931 ; infill
G1 X111.773 Y86.586 E0.55560 ; infill
G1 X111.141 Y86.586 E0.02931 ; infill
G1 X102.677 Y95.050 E0.55560 ; infill
G1 X102.045 Y95.050 E0.02931 ; infill
G1 X110.509 Y86.586 E0.55560 ; infill
G1 X109.878 Y86.586 E0.02931 ; infill
G1 X101.414 Y95.050 E0.55560 ; infill
G1 X100.782 Y95.050 E0.02931 ; infill
G1 X109.246 Y86.586 E0.55560 ; infill
G1 X108.615 Y86.586 E0.02931 ; infill
G1 X100.151 Y95.050 E0.55560 ; infill
G1 X99.519 Y95.050 E0.02931 ; infill
G1 X107.983 Y86.586 E0.55560 ; infill
G1 X107.352 Y86.586 E0.02931 ; infill
G1 X98.888 Y95.050 E0.55560 ; infill
G1 X98.256 Y95.050 E0.02931 ; infill
G1 X106.720 Y86.586 E0.55560 ; infill
G1 X106.089 Y86.586 E0.02931 ; infill
G1 X97.625 Y95.050 E0.55560 ; infill
G1 X96.993 Y95.050 E0.02931 ; infill
G1 X105.457 Y86.586 E0.55560 ; infill
G1 X104.825 Y86.586 E0.02931 ; infill
G1 X96.361 Y95.050 E0.55560 ; infill
G1 X95.730 Y95.050 E0.02931 ; infill
G1 X104.194 Y86.586 E0.55560 ; infill
M73 Q8 S127
G1 X103.562 Y86.586 E0.02931 ; infill
G1 X95.098 Y95.050 E0.55560 ; infill
G1 X94.467 Y95.050 E0.02931 ; infill
G1 X102.931 Y86.586 E0.55560 ; infill
G1 X102.299 Y86.586 E0.02931 ; infill
G1 X93.835 Y95.050 E0.55560 ; infill
G1 X93.204 Y95.050 E0.02931 ; infill
G1 X101.668 Y86.586 E0.55560 ; infill
G1 X101.036 Y86.586 E0.02931 ; infill
G1 X92.572 Y95.050 E0.55560 ; infill
G1 X91.941 Y95.050 E0.02931 ; infill
G1 X100.405 Y86.586 E0.55560 ; infill
G1 X99.773 Y86.586 E0.02931 ; infill
G1 X91.309 Y95.050 E0.55560 ; infill
G1 X90.677 Y95.050 E0.02931 ; infill
G1 X99.141 Y86.586 E0.55560 ; infill
G1 X98.510 Y86.586 E0.02931 ; infill
G1 X90.046 Y95.050 E0.55560 ; infill
M73 P8 R125
G1 X89.414 Y95.050 E0.02931 ; infill
G1 X97.878 Y86.586 E0.55560 ; infill
G1 X97.247 Y86.586 E0.02931 ; infill
G1 X88.783 Y95.050 E0.55560 ; infill
G1 X88.151 Y95.050 E0.02931 ; infill
G1 X96.615 Y86.586 E0.55560 ; infill
G1 X95.984 Y86.586 E0.02931 ; infill
G1 X87.520 Y95.050 E0.55560 ; infill
G1 X86.888 Y95.050 E0.02931 ; infill
G1 X95.352 Y86.586 E0.55560 ; infill
G1 X94.721 Y86.586 E0.02931 ; infill
G1 X86.257 Y95.050 E0.55560 ; infill
G1 X85.625 Y95.050 E0.02931 ; infill
G1 X94.089 Y86.586 E0.55560 ; infill
G1 X93.716 Y86.586 E0.01731 ; infill
G1 X93.575 Y86.468 E0.00852 ; infill
G1 X84.993 Y95.050 E0.56334 ; infill
G1 X84.362 Y95.050 E0.02931 ; infill
G1 X93.232 Y86.180 E0.58226 ; infill
G1 X92.889 Y85.892 E0.02081 ; infill
G1 X83.730 Y95.050 E0.60117 ; infill
G1 X83.099 Y95.050 E0.02931 ; infill
G1 X92.545 Y85.604 E0.62009 ; infill
G1 X92.202 Y85.316 E0.02081 ; infill
G1 X82.467 Y95.050 E0.63900 ; infill
G1 X81.836 Y95.050 E0.02931 ; infill
G1 X91.858 Y85.028 E0.65792 ; infill
G1 X91.515 Y84.739 E0.02081 ; infill
G1 X81.204 Y95.050 E0.67683 ; infill
G1 X80.573 Y95.050 E0.02931 ; infill
G1 X91.172 Y84.451 E0.69575 ; infill
G1 X90.828 Y84.163 E0.02081 ; infill
G1 X79.952 Y95.039 E0.71391 ; infill
G1 X79.609 Y94.751 E0.02081 ; infill
G1 X90.485 Y83.875 E0.71391 ; infill
G1 X90.141 Y83.587 E0.02081 ; infill
G1 X79.266 Y94.462 E0.71391 ; infill
G1 X78.922 Y94.174 E0.02081 ; infill
G1 X89.798 Y83.299 E0.71391 ; infill
G1 X89.455 Y83.010 E0.02081 ; infill
G1 X78.579 Y93.886 E0.71391 ; infill
G1 X78.235 Y93.598 E0.02081 ; infill
G1 X89.111 Y82.722 E0.71391 ; infill
G1 X88.768 Y82.434 E0.02081 ; infill
G1 X77.892 Y93.310 E0.71391 ; infill
G1 X77.549 Y93.022 E0.02081 ; infill
G1 X88.424 Y82.146 E0.71391 ; infill
G1 X88.081 Y81.858 E0.02081 ; infill
G1 X77.205 Y92.734 E0.71391 ; infill
G1 X76.862 Y92.445 E0.02081 ; infill
G1 X87.738 Y81.570 E0.71391 ; infill
G1 X87.394 Y81.282 E0.02081 ; infill
G1 X76.518 Y92.157 E0.71391 ; infill
G1 X76.175 Y91.869 E0.02081 ; infill
G1 X87.051 Y80.993 E0.71391 ; infill
G1 X86.707 Y80.705 E0.02081 ; infill
G1 X75.832 Y91.581 E0.71391 ; infill
G1 X75.488 Y91.293 E0.02081 ; infill
G1 X86.364 Y80.417 E0.71391 ; infill
G1 X86.020 Y80.129 E0.02081 ; infill
G1 X75.145 Y91.005 E0.71391 ; infill
G1 X74.801 Y90.717 E0.02081 ; infill
G1 X85.677 Y79.841 E0.71391 ; infill
G1 X85.334 Y79.553 E0.02081 ; infill
G1 X74.458 Y90.428 E0.71391 ; infill
G1 X74.115 Y90.140 E0.02081 ; infill
G1 X84.982 Y79.273 E0.71334 ; infill
G1 X84.350 Y79.273 E0.02931 ; infill
G1 X73.771 Y89.852 E0.69442 ; infill
G1 X73.428 Y89.564 E0.02081 ; infill
G1 X83.719 Y79.273 E0.67551 ; infill
G1 X83.087 Y79.273 E0.02931 ; infill
G1 X73.084 Y89.276 E0.65659 ; infill
G1 X72.741 Y88.988 E0.02081 ; infill
G1 X82.455 Y79.273 E0.63768 ; infill
G1 X81.824 Y79.273 E0.02931 ; infill
G1 X72.398 Y88.699 E0.61876 ; infill
G1 X72.054 Y88.411 E0.02081 ; infill
G1 X81.192 Y79.273 E0.59985 ; infill
G1 X80.561 Y79.273 E0.02931 ; infill
G1 X71.711 Y88.123 E0.58093 ; infill
G1 X71.367 Y87.835 E0.02081 ; infill
G1 X79.929 Y79.273 E0.56202 ; infill
G1 X79.864 Y79.273 E0.00304 ; infill
G1 X79.556 Y79.015 E0.01865 ; infill
G1 X71.024 Y87.547 E0.56006 ; infill
G1 X70.681 Y87.259 E0.02081 ; infill
G1 X79.212 Y78.727 E0.56006 ; infill
G1 X78.869 Y78.439 E0.02081 ; infill
G1 X70.337 Y86.971 E0.56006 ; infill
G1 X69.994 Y86.682 E0.02081 ; infill
G1 X78.526 Y78.150 E0.56006 ; infill
G1 X78.182 Y77.862 E0.02081 ; infill
G1 X69.650 Y86.394 E0.56006 ; infill
G1 X69.307 Y86.106 E0.02081 ; infill
G1 X77.839 Y77.574 E0.56006 ; infill
G1 X77.495 Y77.286 E0.02081 ; infill
G1 X68.964 Y85.818 E0.56006 ; infill
G1 X68.620 Y85.530 E0.02081 ; infill
G1 X77.152 Y76.998 E0.56006 ; infill
G1 X76.809 Y76.710 E0.02081 ; infill
G1 X68.277 Y85.242 E0.56006 ; infill
G1 X67.933 Y84.953 E0.02081 ; infill
G1 X76.465 Y76.422 E0.56006 ; infill
G1 X76.122 Y76.133 E0.02081 ; infill
G1 X67.590 Y84.665 E0.56006 ; infill
G1 X67.247 Y84.377 E0.02081 ; infill
G1 X75.778 Y75.845 E0.56006 ; infill
G1 X75.435 Y75.557 E0.02081 ; infill
G1 X66.903 Y84.089 E0.56006 ; infill
G1 X66.560 Y83.801 E0.02081 ; infill
G1 X75.092 Y75.269 E0.56006 ; infill
G1 X74.748 Y74.981 E0.02081 ; infill
G1 X66.216 Y83.513 E0.56006 ; infill
G1 X65.873 Y83.225 E0.02081 ; infill
G1 X74.405 Y74.693 E0.56006 ; infill
G1 X74.061 Y74.405 E0.02081 ; infill
G1 X65.529 Y82.936 E0.56006 ; infill
G1 X65.186 Y82.648 E0.02081 ; infill
G1 X73.718 Y74.116 E0.56006 ; infill
G1 X73.375 Y73.828 E0.02081 ; infill
G1 X64.843 Y82.360 E0.56006 ; infill
G1 X64.499 Y82.072 E0.02081 ; infill
G1 X73.031 Y73.540 E0.56006 ; infill
G1 X72.688 Y73.252 E0.02081 ; infill
G1 X64.156 Y81.784 E0.56006 ; infill
G1 X63.812 Y81.496 E0.02081 ; infill
G1 X72.344 Y72.964 E0.56006 ; infill
G1 X72.001 Y72.676 E0.02081 ; infill
G1 X63.469 Y81.208 E0.56006 ; infill
G1 X63.126 Y80.919 E0.02081 ; infill
G1 X71.658 Y72.387 E0.56006 ; infill
G1 X71.314 Y72.099 E0.02081 ; infill
G1 X62.782 Y80.631 E0.56006 ; infill
G1 X62.439 Y80.343 E0.02081 ; infill
G1 X70.971 Y71.811 E0.56006 ; infill
G1 X70.627 Y71.523 E0.02081 ; infill
G1 X62.095 Y80.055 E0.56006 ; infill
G1 X61.752 Y79.767 E0.02081 ; infill
G1 X70.284 Y71.235 E0.56006 ; infill
G1 X69.941 Y70.947 E0.02081 ; infill
G1 X61.409 Y79.479 E0.56006 ; infill
G1 X61.065 Y79.190 E0.02081 ; infill
G1 X69.597 Y70.659 E0.56006 ; infill
G1 X69.254 Y70.370 E0.02081 ; infill
G1 X60.722 Y78.902 E0.56006 ; infill
G1 X60.378 Y78.614 E0.02081 ; infill
G1 X68.910 Y70.082 E0.56006 ; infill
G1 X68.567 Y69.794 E0.02081 ; infill
G1 X60.035 Y78.326 E0.56006 ; infill
G1 X59.692 Y78.038 E0.02081 ; infill
G1 X68.224 Y69.506 E0.56006 ; infill
G1 X67.880 Y69.218 E0.02081 ; infill
G1 X59.206 Y77.892 E0.56941 ; infill
G1 X58.862 Y77.604 F10800.000 ; move to first infill point
G1 F8061.32
G1 X67.537 Y68.930 E0.56941 ; infill
G1 X67.193 Y68.642 E0.02081 ; infill
G1 X62.077 Y73.757 E0.33582 ; infill
G1 F8640
G1 X64.405 Y71.430 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.600 F10800.000 ; lift Z
G1 X147.948 Y95.251 ; move to first infill point
G1 Z1.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8061.32
G1 X159.958 Y83.241 E0.78836 ; infill
G1 F8640
G1 X157.631 Y85.569 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.600 F10800.000 ; lift Z
G1 X163.883 Y79.948 ; move to first infill point
G1 Z1.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8061.32
G1 X148.781 Y95.050 E0.99138 ; infill
G1 X149.412 Y95.050 E0.02931 ; infill
G1 X165.189 Y79.273 E1.03565 ; infill
G1 X165.821 Y79.273 E0.02931 ; infill
G1 X150.044 Y95.050 E1.03565 ; infill
G1 X150.675 Y95.050 E0.02931 ; infill
G1 X166.452 Y79.273 E1.03565 ; infill
G1 X167.084 Y79.273 E0.02931 ; infill
G1 X151.307 Y95.050 E1.03565 ; infill
G1 X151.938 Y95.050 E0.02931 ; infill
G1 X167.715 Y79.273 E1.03565 ; infill
G1 X168.347 Y79.273 E0.02931 ; infill
G1 X152.570 Y95.050 E1.03565 ; infill
G1 X153.201 Y95.050 E0.02931 ; infill
G1 X168.978 Y79.273 E1.03565 ; infill
G1 X169.610 Y79.273 E0.02931 ; infill
G1 X153.632 Y95.251 E1.04883 ; infill
G1 X154.264 Y95.251 F10800.000 ; move to first infill point
G1 F8061.32
G1 X172.420 Y77.095 E1.19182 ; infill
G1 F8640
G1 X170.092 Y79.422 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.600 F10800.000 ; lift Z
G1 X176.345 Y73.801 ; move to first infill point
G1 Z1.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8061.32
G1 X154.895 Y95.251 E1.40802 ; infill
G1 X155.527 Y95.251 F10800.000 ; move to first infill point
G1 F8061.32
G1 X180.270 Y70.508 E1.62421 ; infill
G1 F8640
G1 X177.943 Y72.835 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.600 F10800.000 ; lift Z
G1 X183.237 Y68.173 ; move to first infill point
G1 Z1.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8061.32
G1 X156.359 Y95.050 E1.76430 ; infill
G1 X156.991 Y95.050 E0.02931 ; infill
G1 X183.382 Y68.659 E1.73240 ; infill
G1 X183.670 Y69.002 E0.02081 ; infill
G1 X157.622 Y95.050 E1.70986 ; infill
G1 X158.254 Y95.050 E0.02931 ; infill
G1 X183.958 Y69.346 E1.68732 ; infill
G1 X184.247 Y69.689 E0.02081 ; infill
G1 X158.885 Y95.050 E1.66478 ; infill
G1 X159.517 Y95.050 E0.02931 ; infill
G1 X184.535 Y70.032 E1.64223 ; infill
G1 X184.823 Y70.376 E0.02081 ; infill
G1 X160.149 Y95.050 E1.61969 ; infill
G1 X160.780 Y95.050 E0.02931 ; infill
G1 X185.111 Y70.719 E1.59715 ; infill
G1 X185.399 Y71.063 E0.02081 ; infill
G1 X161.412 Y95.050 E1.57461 ; infill
G1 X162.043 Y95.050 E0.02931 ; infill
G1 X185.687 Y71.406 E1.55207 ; infill
G1 X185.976 Y71.749 E0.02081 ; infill
G1 X162.675 Y95.050 E1.52952 ; infill
G1 X163.306 Y95.050 E0.02931 ; infill
G1 X186.264 Y72.093 E1.50698 ; infill
G1 X186.552 Y72.436 E0.02081 ; infill
G1 X163.938 Y95.050 E1.48444 ; infill
G1 X164.569 Y95.050 E0.02931 ; infill
G1 X186.840 Y72.780 E1.46190 ; infill
G1 X187.128 Y73.123 E0.02081 ; infill
G1 X165.201 Y95.050 E1.43936 ; infill
G1 X165.833 Y95.050 E0.02931 ; infill
G1 X187.416 Y73.466 E1.41681 ; infill
G1 X187.704 Y73.810 E0.02081 ; infill
G1 X166.464 Y95.050 E1.39427 ; infill
G1 X167.096 Y95.050 E0.02931 ; infill
G1 X187.993 Y74.153 E1.37173 ; infill
G1 X188.281 Y74.497 E0.02081 ; infill
G1 X167.727 Y95.050 E1.34919 ; infill
G1 X168.359 Y95.050 E0.02931 ; infill
G1 X188.569 Y74.840 E1.32665 ; infill
G1 X188.857 Y75.184 E0.02081 ; infill
G1 X168.990 Y95.050 E1.30410 ; infill
G1 X169.622 Y95.050 E0.02931 ; infill
G1 X189.145 Y75.527 E1.28156 ; infill
G1 X189.433 Y75.870 E0.02081 ; infill
G1 X170.053 Y95.251 E1.27221 ; infill
G1 F8640
G1 X172.380 Y92.924 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.600 F10800.000 ; lift Z
G1 X173.694 Y92.241 ; move to first infill point
G1 Z1.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8061.32
G1 X189.721 Y76.214 E1.05208 ; infill
G1 X190.010 Y76.557 E0.02081 ; infill
G1 X177.619 Y88.948 E0.81334 ; infill
G1 F8640
G1 X179.947 Y86.620 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.600 F10800.000 ; lift Z
G1 X181.544 Y85.654 ; move to first infill point
G1 Z1.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8061.32
G1 X190.298 Y76.901 E0.57460 ; infill
G1 X190.586 Y77.244 E0.02081 ; infill
G1 X185.470 Y82.360 E0.33586 ; infill
G1 F8640
G1 X187.797 Y80.033 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.600 F10800.000 ; lift Z
G1 X124.715 Y133.512 ; move to first perimeter point
G1 Z1.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.566 Y133.512 E1.85994 ; perimeter
G1 X58.407 Y115.758 E1.13785 ; perimeter
G1 X66.540 Y106.066 E0.52121 ; perimeter
G1 X79.693 Y117.103 E0.70736 ; perimeter
G1 X84.830 Y117.103 E0.21162 ; perimeter
G1 X93.546 Y124.416 E0.46869 ; perimeter
G1 X155.884 Y124.416 E2.56806 ; perimeter
G1 X164.599 Y117.103 E0.46869 ; perimeter
G1 X169.736 Y117.103 E0.21162 ; perimeter
G1 X182.890 Y106.066 E0.70736 ; perimeter
G1 X191.022 Y115.758 E0.52121 ; perimeter
G1 X169.864 Y133.512 E1.13785 ; perimeter
G1 X124.775 Y133.512 E1.85747 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y133.909 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.422 Y133.909 E1.86588 ; perimeter
G1 X57.849 Y115.807 E1.16012 ; perimeter
G1 X66.491 Y105.508 E0.55386 ; perimeter
G1 X79.838 Y116.707 E0.71774 ; perimeter
G1 X84.975 Y116.707 E0.21162 ; perimeter
G1 X93.690 Y124.020 E0.46869 ; perimeter
G1 X155.740 Y124.020 E2.55617 ; perimeter
G1 X164.455 Y116.707 E0.46869 ; perimeter
G1 X169.592 Y116.707 E0.21162 ; perimeter
G1 X182.939 Y105.508 E0.71774 ; perimeter
G1 X191.581 Y115.807 E0.55386 ; perimeter
G1 X170.008 Y133.909 E1.16012 ; perimeter
G1 X124.775 Y133.909 E1.86341 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y134.305 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.277 Y134.305 E1.87182 ; perimeter
G1 X57.291 Y115.856 E1.18239 ; perimeter
G1 X66.442 Y104.950 E0.58652 ; perimeter
G1 X79.982 Y116.311 E0.72813 ; perimeter
G1 X85.119 Y116.311 E0.21162 ; perimeter
G1 X93.834 Y123.624 E0.46869 ; perimeter
G1 X155.595 Y123.624 E2.54429 ; perimeter
G1 X164.311 Y116.311 E0.46869 ; perimeter
G1 X169.448 Y116.311 E0.21162 ; perimeter
G1 X182.987 Y104.950 E0.72813 ; perimeter
G1 X192.139 Y115.856 E0.58652 ; perimeter
G1 X170.152 Y134.305 E1.18239 ; perimeter
G1 X124.775 Y134.305 E1.86935 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.485 Y133.978 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y134.305 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.600 F10800.000 ; lift Z
G1 X147.031 Y133.397 ; move to first infill point
G1 Z1.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8061.32
G1 X155.696 Y124.732 E0.56878 ; infill
G1 X155.065 Y124.732 E0.02931 ; infill
G1 X146.601 Y133.196 E0.55560 ; infill
G1 X145.969 Y133.196 E0.02931 ; infill
G1 X154.433 Y124.732 E0.55560 ; infill
G1 X153.802 Y124.732 E0.02931 ; infill
G1 X145.338 Y133.196 E0.55560 ; infill
G1 X144.706 Y133.196 E0.02931 ; infill
G1 X153.170 Y124.732 E0.55560 ; infill
G1 X152.538 Y124.732 E0.02931 ; infill
G1 X144.074 Y133.196 E0.55560 ; infill
G1 X143.443 Y133.196 E0.02931 ; infill
G1 X151.907 Y124.732 E0.55560 ; infill
G1 X151.275 Y124.732 E0.02931 ; infill
G1 X142.811 Y133.196 E0.55560 ; infill
G1 X142.180 Y133.196 E0.02931 ; infill
G1 X150.644 Y124.732 E0.55560 ; infill
G1 X150.012 Y124.732 E0.02931 ; infill
G1 X141.548 Y133.196 E0.55560 ; infill
G1 X140.917 Y133.196 E0.02931 ; infill
G1 X149.381 Y124.732 E0.55560 ; infill
G1 X148.749 Y124.732 E0.02931 ; infill
G1 X140.285 Y133.196 E0.55560 ; infill
G1 X139.654 Y133.196 E0.02931 ; infill
G1 X148.118 Y124.732 E0.55560 ; infill
G1 X147.486 Y124.732 E0.02931 ; infill
G1 X139.022 Y133.196 E0.55560 ; infill
G1 X138.390 Y133.196 E0.02931 ; infill
G1 X146.854 Y124.732 E0.55560 ; infill
G1 X146.223 Y124.732 E0.02931 ; infill
G1 X137.759 Y133.196 E0.55560 ; infill
G1 X137.127 Y133.196 E0.02931 ; infill
G1 X145.591 Y124.732 E0.55560 ; infill
G1 X144.960 Y124.732 E0.02931 ; infill
G1 X136.496 Y133.196 E0.55560 ; infill
G1 X135.864 Y133.196 E0.02931 ; infill
G1 X144.328 Y124.732 E0.55560 ; infill
G1 X143.697 Y124.732 E0.02931 ; infill
G1 X135.233 Y133.196 E0.55560 ; infill
G1 X134.601 Y133.196 E0.02931 ; infill
G1 X143.065 Y124.732 E0.55560 ; infill
G1 X142.434 Y124.732 E0.02931 ; infill
G1 X133.970 Y133.196 E0.55560 ; infill
M73 Q8 S126
G1 X133.338 Y133.196 E0.02931 ; infill
G1 X141.802 Y124.732 E0.55560 ; infill
G1 X141.170 Y124.732 E0.02931 ; infill
G1 X132.706 Y133.196 E0.55560 ; infill
G1 X132.075 Y133.196 E0.02931 ; infill
G1 X140.539 Y124.732 E0.55560 ; infill
G1 X139.907 Y124.732 E0.02931 ; infill
G1 X131.443 Y133.196 E0.55560 ; infill
G1 X130.812 Y133.196 E0.02931 ; infill
G1 X139.276 Y124.732 E0.55560 ; infill
G1 X138.644 Y124.732 E0.02931 ; infill
G1 X130.180 Y133.196 E0.55560 ; infill
G1 X129.549 Y133.196 E0.02931 ; infill
G1 X138.013 Y124.732 E0.55560 ; infill
G1 X137.381 Y124.732 E0.02931 ; infill
G1 X128.917 Y133.196 E0.55560 ; infill
G1 X128.286 Y133.196 E0.02931 ; infill
G1 X136.750 Y124.732 E0.55560 ; infill
G1 X136.118 Y124.732 E0.02931 ; infill
G1 X127.654 Y133.196 E0.55560 ; infill
G1 X127.022 Y133.196 E0.02931 ; infill
M73 P8 R124
G1 X135.486 Y124.732 E0.55560 ; infill
G1 X134.855 Y124.732 E0.02931 ; infill
G1 X126.391 Y133.196 E0.55560 ; infill
G1 X125.759 Y133.196 E0.02931 ; infill
G1 X134.223 Y124.732 E0.55560 ; infill
G1 X133.592 Y124.732 E0.02931 ; infill
G1 X125.128 Y133.196 E0.55560 ; infill
G1 X124.496 Y133.196 E0.02931 ; infill
G1 X132.960 Y124.732 E0.55560 ; infill
G1 X132.329 Y124.732 E0.02931 ; infill
G1 X123.865 Y133.196 E0.55560 ; infill
G1 X123.233 Y133.196 E0.02931 ; infill
G1 X131.697 Y124.732 E0.55560 ; infill
G1 X131.066 Y124.732 E0.02931 ; infill
G1 X122.602 Y133.196 E0.55560 ; infill
G1 X121.970 Y133.196 E0.02931 ; infill
G1 X130.434 Y124.732 E0.55560 ; infill
G1 X129.802 Y124.732 E0.02931 ; infill
G1 X121.338 Y133.196 E0.55560 ; infill
G1 X120.707 Y133.196 E0.02931 ; infill
G1 X129.171 Y124.732 E0.55560 ; infill
G1 X128.539 Y124.732 E0.02931 ; infill
G1 X120.075 Y133.196 E0.55560 ; infill
G1 X119.444 Y133.196 E0.02931 ; infill
G1 X127.908 Y124.732 E0.55560 ; infill
G1 X127.276 Y124.732 E0.02931 ; infill
G1 X118.812 Y133.196 E0.55560 ; infill
G1 X118.181 Y133.196 E0.02931 ; infill
G1 X126.645 Y124.732 E0.55560 ; infill
G1 X126.013 Y124.732 E0.02931 ; infill
G1 X117.549 Y133.196 E0.55560 ; infill
G1 X116.918 Y133.196 E0.02931 ; infill
G1 X125.382 Y124.732 E0.55560 ; infill
G1 X124.750 Y124.732 E0.02931 ; infill
G1 X116.286 Y133.196 E0.55560 ; infill
G1 X115.654 Y133.196 E0.02931 ; infill
G1 X124.118 Y124.732 E0.55560 ; infill
G1 X123.487 Y124.732 E0.02931 ; infill
G1 X115.023 Y133.196 E0.55560 ; infill
G1 X114.391 Y133.196 E0.02931 ; infill
G1 X122.855 Y124.732 E0.55560 ; infill
G1 X122.224 Y124.732 E0.02931 ; infill
G1 X113.760 Y133.196 E0.55560 ; infill
G1 X113.128 Y133.196 E0.02931 ; infill
G1 X121.592 Y124.732 E0.55560 ; infill
G1 X120.961 Y124.732 E0.02931 ; infill
G1 X112.497 Y133.196 E0.55560 ; infill
G1 X111.865 Y133.196 E0.02931 ; infill
G1 X120.329 Y124.732 E0.55560 ; infill
G1 X119.698 Y124.732 E0.02931 ; infill
G1 X111.234 Y133.196 E0.55560 ; infill
G1 X110.602 Y133.196 E0.02931 ; infill
G1 X119.066 Y124.732 E0.55560 ; infill
G1 X118.434 Y124.732 E0.02931 ; infill
G1 X109.970 Y133.196 E0.55560 ; infill
G1 X109.339 Y133.196 E0.02931 ; infill
G1 X117.803 Y124.732 E0.55560 ; infill
G1 X117.171 Y124.732 E0.02931 ; infill
G1 X108.707 Y133.196 E0.55560 ; infill
G1 X108.076 Y133.196 E0.02931 ; infill
G1 X116.540 Y124.732 E0.55560 ; infill
G1 X115.908 Y124.732 E0.02931 ; infill
G1 X107.444 Y133.196 E0.55560 ; infill
G1 X106.813 Y133.196 E0.02931 ; infill
G1 X115.277 Y124.732 E0.55560 ; infill
G1 X114.645 Y124.732 E0.02931 ; infill
G1 X106.181 Y133.196 E0.55560 ; infill
G1 X105.550 Y133.196 E0.02931 ; infill
G1 X114.014 Y124.732 E0.55560 ; infill
G1 X113.382 Y124.732 E0.02931 ; infill
G1 X104.918 Y133.196 E0.55560 ; infill
G1 X104.286 Y133.196 E0.02931 ; infill
G1 X112.750 Y124.732 E0.55560 ; infill
G1 X112.119 Y124.732 E0.02931 ; infill
G1 X103.655 Y133.196 E0.55560 ; infill
G1 X103.023 Y133.196 E0.02931 ; infill
G1 X111.487 Y124.732 E0.55560 ; infill
G1 X110.856 Y124.732 E0.02931 ; infill
G1 X102.392 Y133.196 E0.55560 ; infill
G1 X101.760 Y133.196 E0.02931 ; infill
G1 X110.224 Y124.732 E0.55560 ; infill
G1 X109.593 Y124.732 E0.02931 ; infill
G1 X101.129 Y133.196 E0.55560 ; infill
G1 X100.497 Y133.196 E0.02931 ; infill
G1 X108.961 Y124.732 E0.55560 ; infill
G1 X108.330 Y124.732 E0.02931 ; infill
G1 X99.866 Y133.196 E0.55560 ; infill
G1 X99.234 Y133.196 E0.02931 ; infill
G1 X107.698 Y124.732 E0.55560 ; infill
G1 X107.066 Y124.732 E0.02931 ; infill
G1 X98.602 Y133.196 E0.55560 ; infill
G1 X97.971 Y133.196 E0.02931 ; infill
G1 X106.435 Y124.732 E0.55560 ; infill
G1 X105.803 Y124.732 E0.02931 ; infill
G1 X97.339 Y133.196 E0.55560 ; infill
G1 X96.708 Y133.196 E0.02931 ; infill
G1 X105.172 Y124.732 E0.55560 ; infill
G1 X104.540 Y124.732 E0.02931 ; infill
G1 X96.076 Y133.196 E0.55560 ; infill
G1 X95.445 Y133.196 E0.02931 ; infill
G1 X103.909 Y124.732 E0.55560 ; infill
G1 X103.277 Y124.732 E0.02931 ; infill
G1 X94.813 Y133.196 E0.55560 ; infill
G1 X94.182 Y133.196 E0.02931 ; infill
G1 X102.646 Y124.732 E0.55560 ; infill
G1 X102.014 Y124.732 E0.02931 ; infill
G1 X93.550 Y133.196 E0.55560 ; infill
G1 X92.918 Y133.196 E0.02931 ; infill
G1 X101.382 Y124.732 E0.55560 ; infill
G1 X100.751 Y124.732 E0.02931 ; infill
G1 X92.287 Y133.196 E0.55560 ; infill
G1 X91.655 Y133.196 E0.02931 ; infill
G1 X100.119 Y124.732 E0.55560 ; infill
G1 X99.488 Y124.732 E0.02931 ; infill
G1 X91.024 Y133.196 E0.55560 ; infill
G1 X90.392 Y133.196 E0.02931 ; infill
G1 X98.856 Y124.732 E0.55560 ; infill
G1 X98.225 Y124.732 E0.02931 ; infill
G1 X89.761 Y133.196 E0.55560 ; infill
G1 X89.129 Y133.196 E0.02931 ; infill
G1 X97.593 Y124.732 E0.55560 ; infill
G1 X96.962 Y124.732 E0.02931 ; infill
G1 X88.498 Y133.196 E0.55560 ; infill
G1 X87.866 Y133.196 E0.02931 ; infill
G1 X96.330 Y124.732 E0.55560 ; infill
G1 X95.698 Y124.732 E0.02931 ; infill
G1 X87.234 Y133.196 E0.55560 ; infill
G1 X86.603 Y133.196 E0.02931 ; infill
G1 X95.067 Y124.732 E0.55560 ; infill
G1 X94.435 Y124.732 E0.02931 ; infill
G1 X85.971 Y133.196 E0.55560 ; infill
G1 X85.340 Y133.196 E0.02931 ; infill
G1 X93.804 Y124.732 E0.55560 ; infill
G1 X93.431 Y124.732 E0.01731 ; infill
G1 X93.290 Y124.614 E0.00852 ; infill
G1 X84.708 Y133.196 E0.56334 ; infill
G1 X84.077 Y133.196 E0.02931 ; infill
G1 X92.947 Y124.326 E0.58226 ; infill
G1 X92.603 Y124.038 E0.02081 ; infill
G1 X83.445 Y133.196 E0.60117 ; infill
G1 X82.814 Y133.196 E0.02931 ; infill
G1 X92.260 Y123.750 E0.62009 ; infill
G1 X91.917 Y123.462 E0.02081 ; infill
G1 X82.182 Y133.196 E0.63900 ; infill
G1 X81.550 Y133.196 E0.02931 ; infill
G1 X91.573 Y123.174 E0.65792 ; infill
G1 X91.230 Y122.886 E0.02081 ; infill
G1 X80.919 Y133.196 E0.67683 ; infill
G1 X80.287 Y133.196 E0.02931 ; infill
G1 X90.886 Y122.597 E0.69575 ; infill
G1 X90.543 Y122.309 E0.02081 ; infill
G1 X79.667 Y133.185 E0.71391 ; infill
G1 X79.324 Y132.897 E0.02081 ; infill
G1 X90.200 Y122.021 E0.71391 ; infill
G1 X89.856 Y121.733 E0.02081 ; infill
G1 X78.980 Y132.609 E0.71391 ; infill
G1 X78.637 Y132.320 E0.02081 ; infill
G1 X89.513 Y121.445 E0.71391 ; infill
G1 X89.169 Y121.157 E0.02081 ; infill
G1 X78.294 Y132.032 E0.71391 ; infill
G1 X77.950 Y131.744 E0.02081 ; infill
G1 X88.826 Y120.868 E0.71391 ; infill
G1 X88.483 Y120.580 E0.02081 ; infill
G1 X77.607 Y131.456 E0.71391 ; infill
G1 X77.263 Y131.168 E0.02081 ; infill
G1 X88.139 Y120.292 E0.71391 ; infill
G1 X87.796 Y120.004 E0.02081 ; infill
G1 X76.920 Y130.880 E0.71391 ; infill
G1 X76.577 Y130.592 E0.02081 ; infill
G1 X87.452 Y119.716 E0.71391 ; infill
G1 X87.109 Y119.428 E0.02081 ; infill
G1 X76.233 Y130.303 E0.71391 ; infill
G1 X75.890 Y130.015 E0.02081 ; infill
G1 X86.766 Y119.140 E0.71391 ; infill
G1 X86.422 Y118.851 E0.02081 ; infill
G1 X75.546 Y129.727 E0.71391 ; infill
G1 X75.203 Y129.439 E0.02081 ; infill
G1 X86.079 Y118.563 E0.71391 ; infill
G1 X85.735 Y118.275 E0.02081 ; infill
G1 X74.860 Y129.151 E0.71391 ; infill
G1 X74.516 Y128.863 E0.02081 ; infill
G1 X85.392 Y117.987 E0.71391 ; infill
G1 X85.049 Y117.699 E0.02081 ; infill
G1 X74.173 Y128.574 E0.71391 ; infill
G1 X73.829 Y128.286 E0.02081 ; infill
G1 X84.696 Y117.419 E0.71334 ; infill
G1 X84.065 Y117.419 E0.02931 ; infill
G1 X73.486 Y127.998 E0.69442 ; infill
G1 X73.143 Y127.710 E0.02081 ; infill
G1 X83.433 Y117.419 E0.67551 ; infill
G1 X82.802 Y117.419 E0.02931 ; infill
G1 X72.799 Y127.422 E0.65659 ; infill
G1 X72.456 Y127.134 E0.02081 ; infill
G1 X82.170 Y117.419 E0.63768 ; infill
G1 X81.539 Y117.419 E0.02931 ; infill
G1 X72.112 Y126.846 E0.61876 ; infill
G1 X71.769 Y126.557 E0.02081 ; infill
G1 X80.907 Y117.419 E0.59985 ; infill
G1 X80.276 Y117.419 E0.02931 ; infill
G1 X71.426 Y126.269 E0.58093 ; infill
G1 X71.082 Y125.981 E0.02081 ; infill
G1 X79.644 Y117.419 E0.56202 ; infill
G1 X79.578 Y117.419 E0.00304 ; infill
G1 X79.271 Y117.161 E0.01865 ; infill
G1 X70.739 Y125.693 E0.56006 ; infill
G1 X70.395 Y125.405 E0.02081 ; infill
G1 X78.927 Y116.873 E0.56006 ; infill
G1 X78.584 Y116.585 E0.02081 ; infill
G1 X70.052 Y125.117 E0.56006 ; infill
G1 X69.709 Y124.829 E0.02081 ; infill
G1 X78.240 Y116.297 E0.56006 ; infill
G1 X77.897 Y116.008 E0.02081 ; infill
G1 X69.365 Y124.540 E0.56006 ; infill
G1 X69.022 Y124.252 E0.02081 ; infill
G1 X77.554 Y115.720 E0.56006 ; infill
G1 X77.210 Y115.432 E0.02081 ; infill
G1 X68.678 Y123.964 E0.56006 ; infill
G1 X68.335 Y123.676 E0.02081 ; infill
G1 X76.867 Y115.144 E0.56006 ; infill
G1 X76.523 Y114.856 E0.02081 ; infill
G1 X67.992 Y123.388 E0.56006 ; infill
G1 X67.648 Y123.100 E0.02081 ; infill
G1 X76.180 Y114.568 E0.56006 ; infill
G1 X75.837 Y114.280 E0.02081 ; infill
G1 X67.305 Y122.811 E0.56006 ; infill
G1 X66.961 Y122.523 E0.02081 ; infill
G1 X75.493 Y113.991 E0.56006 ; infill
G1 X75.150 Y113.703 E0.02081 ; infill
G1 X66.618 Y122.235 E0.56006 ; infill
G1 X66.275 Y121.947 E0.02081 ; infill
G1 X74.806 Y113.415 E0.56006 ; infill
G1 X74.463 Y113.127 E0.02081 ; infill
G1 X65.931 Y121.659 E0.56006 ; infill
G1 X65.588 Y121.371 E0.02081 ; infill
G1 X74.120 Y112.839 E0.56006 ; infill
G1 X73.776 Y112.551 E0.02081 ; infill
G1 X65.244 Y121.083 E0.56006 ; infill
G1 X64.901 Y120.794 E0.02081 ; infill
G1 X73.433 Y112.263 E0.56006 ; infill
G1 X73.089 Y111.974 E0.02081 ; infill
G1 X64.557 Y120.506 E0.56006 ; infill
G1 X64.214 Y120.218 E0.02081 ; infill
G1 X72.746 Y111.686 E0.56006 ; infill
G1 X72.403 Y111.398 E0.02081 ; infill
G1 X63.871 Y119.930 E0.56006 ; infill
G1 X63.527 Y119.642 E0.02081 ; infill
G1 X72.059 Y111.110 E0.56006 ; infill
G1 X71.716 Y110.822 E0.02081 ; infill
G1 X63.184 Y119.354 E0.56006 ; infill
G1 X62.840 Y119.066 E0.02081 ; infill
G1 X71.372 Y110.534 E0.56006 ; infill
G1 X71.029 Y110.245 E0.02081 ; infill
G1 X62.497 Y118.777 E0.56006 ; infill
G1 X62.154 Y118.489 E0.02081 ; infill
G1 X70.686 Y109.957 E0.56006 ; infill
G1 X70.342 Y109.669 E0.02081 ; infill
G1 X61.810 Y118.201 E0.56006 ; infill
G1 X61.467 Y117.913 E0.02081 ; infill
G1 X69.999 Y109.381 E0.56006 ; infill
G1 X69.655 Y109.093 E0.02081 ; infill
G1 X61.123 Y117.625 E0.56006 ; infill
G1 X60.780 Y117.337 E0.02081 ; infill
G1 X69.312 Y108.805 E0.56006 ; infill
G1 X68.969 Y108.517 E0.02081 ; infill
G1 X60.437 Y117.048 E0.56006 ; infill
G1 X60.093 Y116.760 E0.02081 ; infill
G1 X68.625 Y108.228 E0.56006 ; infill
G1 X68.282 Y107.940 E0.02081 ; infill
G1 X59.750 Y116.472 E0.56006 ; infill
G1 X59.406 Y116.184 E0.02081 ; infill
G1 X67.938 Y107.652 E0.56006 ; infill
G1 X67.595 Y107.364 E0.02081 ; infill
G1 X58.920 Y116.038 E0.56941 ; infill
G1 X58.577 Y115.750 F10800.000 ; move to first infill point
G1 F8061.32
G1 X67.252 Y107.076 E0.56941 ; infill
G1 X66.908 Y106.788 E0.02081 ; infill
G1 X61.792 Y111.904 E0.33582 ; infill
G1 F8640
G1 X64.120 Y109.576 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.600 F10800.000 ; lift Z
G1 X147.663 Y133.397 ; move to first infill point
G1 Z1.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8061.32
G1 X159.673 Y121.387 E0.78836 ; infill
G1 F8640
G1 X157.345 Y123.715 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.600 F10800.000 ; lift Z
G1 X163.598 Y118.094 ; move to first infill point
G1 Z1.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8061.32
G1 X148.495 Y133.196 E0.99138 ; infill
G1 X149.127 Y133.196 E0.02931 ; infill
G1 X164.904 Y117.419 E1.03565 ; infill
G1 X165.536 Y117.419 E0.02931 ; infill
G1 X149.758 Y133.196 E1.03565 ; infill
G1 X150.390 Y133.196 E0.02931 ; infill
G1 X166.167 Y117.419 E1.03565 ; infill
G1 X166.799 Y117.419 E0.02931 ; infill
G1 X151.022 Y133.196 E1.03565 ; infill
G1 X151.653 Y133.196 E0.02931 ; infill
G1 X167.430 Y117.419 E1.03565 ; infill
G1 X168.062 Y117.419 E0.02931 ; infill
G1 X152.285 Y133.196 E1.03565 ; infill
G1 X152.916 Y133.196 E0.02931 ; infill
G1 X168.693 Y117.419 E1.03565 ; infill
G1 X169.325 Y117.419 E0.02931 ; infill
G1 X153.347 Y133.397 E1.04883 ; infill
G1 X153.978 Y133.397 F10800.000 ; move to first infill point
G1 F8061.32
G1 X172.135 Y115.241 E1.19182 ; infill
G1 F8640
G1 X169.807 Y117.568 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.600 F10800.000 ; lift Z
G1 X176.060 Y111.948 ; move to first infill point
G1 Z1.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8061.32
G1 X154.610 Y133.397 E1.40802 ; infill
G1 X155.242 Y133.397 F10800.000 ; move to first infill point
G1 F8061.32
G1 X179.985 Y108.654 E1.62421 ; infill
G1 F8640
G1 X177.657 Y110.981 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.600 F10800.000 ; lift Z
G1 X182.951 Y106.319 ; move to first infill point
G1 Z1.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8061.32
G1 X156.074 Y133.196 E1.76430 ; infill
G1 X156.706 Y133.196 E0.02931 ; infill
G1 X183.097 Y106.805 E1.73240 ; infill
G1 X183.385 Y107.148 E0.02081 ; infill
G1 X157.337 Y133.196 E1.70986 ; infill
G1 X157.969 Y133.196 E0.02931 ; infill
G1 X183.673 Y107.492 E1.68732 ; infill
G1 X183.961 Y107.835 E0.02081 ; infill
G1 X158.600 Y133.196 E1.66478 ; infill
G1 X159.232 Y133.196 E0.02931 ; infill
G1 X184.250 Y108.179 E1.64223 ; infill
G1 X184.538 Y108.522 E0.02081 ; infill
G1 X159.863 Y133.196 E1.61969 ; infill
G1 X160.495 Y133.196 E0.02931 ; infill
G1 X184.826 Y108.865 E1.59715 ; infill
G1 X185.114 Y109.209 E0.02081 ; infill
G1 X161.126 Y133.196 E1.57461 ; infill
G1 X161.758 Y133.196 E0.02931 ; infill
G1 X185.402 Y109.552 E1.55207 ; infill
G1 X185.690 Y109.896 E0.02081 ; infill
G1 X162.390 Y133.196 E1.52952 ; infill
G1 X163.021 Y133.196 E0.02931 ; infill
G1 X185.979 Y110.239 E1.50698 ; infill
G1 X186.267 Y110.582 E0.02081 ; infill
G1 X163.653 Y133.196 E1.48444 ; infill
G1 X164.284 Y133.196 E0.02931 ; infill
G1 X186.555 Y110.926 E1.46190 ; infill
G1 X186.843 Y111.269 E0.02081 ; infill
G1 X164.916 Y133.196 E1.43936 ; infill
G1 X165.547 Y133.196 E0.02931 ; infill
G1 X187.131 Y111.613 E1.41681 ; infill
G1 X187.419 Y111.956 E0.02081 ; infill
G1 X166.179 Y133.196 E1.39427 ; infill
G1 X166.810 Y133.196 E0.02931 ; infill
G1 X187.707 Y112.299 E1.37173 ; infill
G1 X187.996 Y112.643 E0.02081 ; infill
G1 X167.442 Y133.196 E1.34919 ; infill
G1 X168.074 Y133.196 E0.02931 ; infill
G1 X188.284 Y112.986 E1.32665 ; infill
G1 X188.572 Y113.330 E0.02081 ; infill
G1 X168.705 Y133.196 E1.30410 ; infill
G1 X169.337 Y133.196 E0.02931 ; infill
G1 X188.860 Y113.673 E1.28156 ; infill
G1 X189.148 Y114.016 E0.02081 ; infill
G1 X169.767 Y133.397 E1.27221 ; infill
G1 F8640
G1 X172.095 Y131.070 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.600 F10800.000 ; lift Z
G1 X173.409 Y130.387 ; move to first infill point
G1 Z1.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8061.32
G1 X189.436 Y114.360 E1.05208 ; infill
G1 X189.724 Y114.703 E0.02081 ; infill
G1 X177.334 Y127.094 E0.81334 ; infill
G1 F8640
G1 X179.661 Y124.766 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.600 F10800.000 ; lift Z
G1 X181.259 Y123.800 ; move to first infill point
G1 Z1.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8061.32
G1 X190.013 Y115.047 E0.57460 ; infill
G1 X190.301 Y115.390 E0.02081 ; infill
G1 X185.184 Y120.507 E0.33586 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;1.25


G1 F8640
G1 X187.512 Y118.179 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;1.25
G1 X125.000 Y95.541 ; move to first perimeter point
G1 Z1.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.787 Y95.541 E1.86256 ; perimeter
G1 X58.446 Y77.634 E1.14768 ; perimeter
G1 X66.804 Y67.674 E0.53563 ; perimeter
G1 X80.042 Y78.782 E0.71194 ; perimeter
G1 X85.179 Y78.782 E0.21162 ; perimeter
G1 X93.895 Y86.095 E0.46869 ; perimeter
G1 X156.105 Y86.095 E2.56281 ; perimeter
G1 X164.821 Y78.782 E0.46869 ; perimeter
G1 X169.958 Y78.782 E0.21162 ; perimeter
G1 X183.196 Y67.674 E0.71194 ; perimeter
G1 X191.554 Y77.634 E0.53563 ; perimeter
G1 X170.213 Y95.541 E1.14768 ; perimeter
G1 X125.060 Y95.541 E1.86009 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y95.938 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.643 Y95.938 E1.86851 ; perimeter
G1 X57.888 Y77.683 E1.16996 ; perimeter
G1 X66.755 Y67.115 E0.56829 ; perimeter
G1 X80.187 Y78.386 E0.72233 ; perimeter
G1 X85.324 Y78.386 E0.21162 ; perimeter
G1 X94.039 Y85.699 E0.46869 ; perimeter
G1 X155.961 Y85.699 E2.55092 ; perimeter
M73 Q9 S125
G1 X164.676 Y78.386 E0.46869 ; perimeter
G1 X169.813 Y78.386 E0.21162 ; perimeter
G1 X183.245 Y67.115 E0.72233 ; perimeter
G1 X192.112 Y77.683 E0.56829 ; perimeter
G1 X170.357 Y95.938 E1.16996 ; perimeter
G1 X125.060 Y95.938 E1.86603 ; perimeter
M73 P9 R123
M204 S1000 ; adjust acceleration
G1 X125.000 Y96.334 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.499 Y96.334 E1.87445 ; perimeter
G1 X57.329 Y77.731 E1.19223 ; perimeter
G1 X66.706 Y66.557 E0.60094 ; perimeter
G1 X80.331 Y77.989 E0.73271 ; perimeter
G1 X85.468 Y77.989 E0.21162 ; perimeter
G1 X94.183 Y85.303 E0.46869 ; perimeter
G1 X155.817 Y85.303 E2.53904 ; perimeter
G1 X164.532 Y77.989 E0.46869 ; perimeter
G1 X169.669 Y77.989 E0.21162 ; perimeter
G1 X183.294 Y66.557 E0.73271 ; perimeter
G1 X192.671 Y77.731 E0.60094 ; perimeter
G1 X170.501 Y96.334 E1.19223 ; perimeter
G1 X125.060 Y96.334 E1.87198 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.770 Y96.007 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y96.334 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.850 F10800.000 ; lift Z
G1 X102.695 Y95.426 ; move to first infill point
G1 Z1.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X91.532 Y84.263 E0.73570 ; infill
G1 F8640
G1 X93.860 Y86.591 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.850 F10800.000 ; lift Z
G1 X94.114 Y86.210 ; move to first infill point
G1 Z1.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X103.128 Y95.225 E0.59413 ; infill
G1 X103.763 Y95.225 E0.02955 ; infill
G1 X94.948 Y86.411 E0.58090 ; infill
G1 X95.583 Y86.411 E0.02955 ; infill
G1 X104.397 Y95.225 E0.58090 ; infill
G1 X105.031 Y95.225 E0.02955 ; infill
G1 X96.217 Y86.411 E0.58090 ; infill
G1 X96.851 Y86.411 E0.02955 ; infill
G1 X105.665 Y95.225 E0.58090 ; infill
G1 X106.299 Y95.225 E0.02955 ; infill
G1 X97.485 Y86.411 E0.58090 ; infill
G1 X98.119 Y86.411 E0.02955 ; infill
G1 X106.933 Y95.225 E0.58090 ; infill
G1 X107.567 Y95.225 E0.02955 ; infill
G1 X98.753 Y86.411 E0.58090 ; infill
G1 X99.387 Y86.411 E0.02955 ; infill
G1 X108.201 Y95.225 E0.58090 ; infill
G1 X108.835 Y95.225 E0.02955 ; infill
G1 X100.021 Y86.411 E0.58090 ; infill
G1 X100.655 Y86.411 E0.02955 ; infill
G1 X109.469 Y95.225 E0.58090 ; infill
G1 X110.103 Y95.225 E0.02955 ; infill
G1 X101.289 Y86.411 E0.58090 ; infill
G1 X101.923 Y86.411 E0.02955 ; infill
G1 X110.737 Y95.225 E0.58090 ; infill
G1 X111.372 Y95.225 E0.02955 ; infill
G1 X102.557 Y86.411 E0.58090 ; infill
G1 X103.192 Y86.411 E0.02955 ; infill
G1 X112.006 Y95.225 E0.58090 ; infill
G1 X112.640 Y95.225 E0.02955 ; infill
G1 X103.826 Y86.411 E0.58090 ; infill
G1 X104.460 Y86.411 E0.02955 ; infill
G1 X113.274 Y95.225 E0.58090 ; infill
G1 X113.908 Y95.225 E0.02955 ; infill
G1 X105.094 Y86.411 E0.58090 ; infill
G1 X105.728 Y86.411 E0.02955 ; infill
G1 X114.542 Y95.225 E0.58090 ; infill
G1 X115.176 Y95.225 E0.02955 ; infill
G1 X106.362 Y86.411 E0.58090 ; infill
G1 X106.996 Y86.411 E0.02955 ; infill
G1 X115.810 Y95.225 E0.58090 ; infill
G1 X116.444 Y95.225 E0.02955 ; infill
G1 X107.630 Y86.411 E0.58090 ; infill
G1 X108.264 Y86.411 E0.02955 ; infill
G1 X117.078 Y95.225 E0.58090 ; infill
G1 X117.712 Y95.225 E0.02955 ; infill
G1 X108.898 Y86.411 E0.58090 ; infill
G1 X109.532 Y86.411 E0.02955 ; infill
G1 X118.347 Y95.225 E0.58090 ; infill
G1 X118.981 Y95.225 E0.02955 ; infill
G1 X110.167 Y86.411 E0.58090 ; infill
G1 X110.801 Y86.411 E0.02955 ; infill
G1 X119.615 Y95.225 E0.58090 ; infill
G1 X120.249 Y95.225 E0.02955 ; infill
G1 X111.435 Y86.411 E0.58090 ; infill
G1 X112.069 Y86.411 E0.02955 ; infill
G1 X120.883 Y95.225 E0.58090 ; infill
G1 X121.517 Y95.225 E0.02955 ; infill
G1 X112.703 Y86.411 E0.58090 ; infill
G1 X113.337 Y86.411 E0.02955 ; infill
G1 X122.151 Y95.225 E0.58090 ; infill
G1 X122.785 Y95.225 E0.02955 ; infill
G1 X113.971 Y86.411 E0.58090 ; infill
G1 X114.605 Y86.411 E0.02955 ; infill
G1 X123.419 Y95.225 E0.58090 ; infill
G1 X124.053 Y95.225 E0.02955 ; infill
G1 X115.239 Y86.411 E0.58090 ; infill
G1 X115.873 Y86.411 E0.02955 ; infill
G1 X124.687 Y95.225 E0.58090 ; infill
G1 X125.321 Y95.225 E0.02955 ; infill
G1 X116.507 Y86.411 E0.58090 ; infill
G1 X117.141 Y86.411 E0.02955 ; infill
G1 X125.956 Y95.225 E0.58090 ; infill
G1 X126.590 Y95.225 E0.02955 ; infill
G1 X117.776 Y86.411 E0.58090 ; infill
G1 X118.410 Y86.411 E0.02955 ; infill
G1 X127.224 Y95.225 E0.58090 ; infill
G1 X127.858 Y95.225 E0.02955 ; infill
G1 X119.044 Y86.411 E0.58090 ; infill
G1 X119.678 Y86.411 E0.02955 ; infill
G1 X128.492 Y95.225 E0.58090 ; infill
G1 X129.126 Y95.225 E0.02955 ; infill
G1 X120.312 Y86.411 E0.58090 ; infill
G1 X120.946 Y86.411 E0.02955 ; infill
G1 X129.760 Y95.225 E0.58090 ; infill
G1 X130.394 Y95.225 E0.02955 ; infill
G1 X121.580 Y86.411 E0.58090 ; infill
G1 X122.214 Y86.411 E0.02955 ; infill
G1 X131.028 Y95.225 E0.58090 ; infill
G1 X131.662 Y95.225 E0.02955 ; infill
G1 X122.848 Y86.411 E0.58090 ; infill
G1 X123.482 Y86.411 E0.02955 ; infill
G1 X132.296 Y95.225 E0.58090 ; infill
G1 X132.930 Y95.225 E0.02955 ; infill
G1 X124.116 Y86.411 E0.58090 ; infill
G1 X124.750 Y86.411 E0.02955 ; infill
G1 X133.565 Y95.225 E0.58090 ; infill
G1 X134.199 Y95.225 E0.02955 ; infill
G1 X125.385 Y86.411 E0.58090 ; infill
G1 X126.019 Y86.411 E0.02955 ; infill
G1 X134.833 Y95.225 E0.58090 ; infill
G1 X135.467 Y95.225 E0.02955 ; infill
G1 X126.653 Y86.411 E0.58090 ; infill
G1 X127.287 Y86.411 E0.02955 ; infill
G1 X136.101 Y95.225 E0.58090 ; infill
G1 X136.735 Y95.225 E0.02955 ; infill
G1 X127.921 Y86.411 E0.58090 ; infill
G1 X128.555 Y86.411 E0.02955 ; infill
G1 X137.369 Y95.225 E0.58090 ; infill
G1 X138.003 Y95.225 E0.02955 ; infill
G1 X129.189 Y86.411 E0.58090 ; infill
G1 X129.823 Y86.411 E0.02955 ; infill
G1 X138.637 Y95.225 E0.58090 ; infill
G1 X139.271 Y95.225 E0.02955 ; infill
G1 X130.457 Y86.411 E0.58090 ; infill
G1 X131.091 Y86.411 E0.02955 ; infill
G1 X139.905 Y95.225 E0.58090 ; infill
G1 X140.539 Y95.225 E0.02955 ; infill
G1 X131.725 Y86.411 E0.58090 ; infill
G1 X132.359 Y86.411 E0.02955 ; infill
G1 X141.174 Y95.225 E0.58090 ; infill
G1 X141.808 Y95.225 E0.02955 ; infill
G1 X132.994 Y86.411 E0.58090 ; infill
G1 X133.628 Y86.411 E0.02955 ; infill
G1 X142.442 Y95.225 E0.58090 ; infill
G1 X143.076 Y95.225 E0.02955 ; infill
G1 X134.262 Y86.411 E0.58090 ; infill
G1 X134.896 Y86.411 E0.02955 ; infill
G1 X143.710 Y95.225 E0.58090 ; infill
G1 X144.344 Y95.225 E0.02955 ; infill
G1 X135.530 Y86.411 E0.58090 ; infill
G1 X136.164 Y86.411 E0.02955 ; infill
G1 X144.978 Y95.225 E0.58090 ; infill
G1 X145.612 Y95.225 E0.02955 ; infill
G1 X136.798 Y86.411 E0.58090 ; infill
G1 X137.432 Y86.411 E0.02955 ; infill
G1 X146.246 Y95.225 E0.58090 ; infill
G1 X146.880 Y95.225 E0.02955 ; infill
G1 X138.066 Y86.411 E0.58090 ; infill
G1 X138.700 Y86.411 E0.02955 ; infill
G1 X147.514 Y95.225 E0.58090 ; infill
G1 X148.149 Y95.225 E0.02955 ; infill
G1 X139.334 Y86.411 E0.58090 ; infill
G1 X139.969 Y86.411 E0.02955 ; infill
G1 X148.783 Y95.225 E0.58090 ; infill
G1 X149.417 Y95.225 E0.02955 ; infill
G1 X140.603 Y86.411 E0.58090 ; infill
G1 X141.237 Y86.411 E0.02955 ; infill
G1 X150.051 Y95.225 E0.58090 ; infill
G1 X150.685 Y95.225 E0.02955 ; infill
G1 X141.871 Y86.411 E0.58090 ; infill
G1 X142.505 Y86.411 E0.02955 ; infill
G1 X151.319 Y95.225 E0.58090 ; infill
G1 X151.953 Y95.225 E0.02955 ; infill
G1 X143.139 Y86.411 E0.58090 ; infill
G1 X143.773 Y86.411 E0.02955 ; infill
G1 X152.587 Y95.225 E0.58090 ; infill
G1 X153.221 Y95.225 E0.02955 ; infill
G1 X144.407 Y86.411 E0.58090 ; infill
G1 X145.041 Y86.411 E0.02955 ; infill
G1 X153.855 Y95.225 E0.58090 ; infill
G1 X154.489 Y95.225 E0.02955 ; infill
G1 X145.675 Y86.411 E0.58090 ; infill
G1 X146.309 Y86.411 E0.02955 ; infill
G1 X155.123 Y95.225 E0.58090 ; infill
G1 X155.758 Y95.225 E0.02955 ; infill
G1 X146.943 Y86.411 E0.58090 ; infill
G1 X147.578 Y86.411 E0.02955 ; infill
G1 X156.392 Y95.225 E0.58090 ; infill
G1 X157.026 Y95.225 E0.02955 ; infill
G1 X148.212 Y86.411 E0.58090 ; infill
G1 X148.846 Y86.411 E0.02955 ; infill
G1 X157.660 Y95.225 E0.58090 ; infill
G1 X158.294 Y95.225 E0.02955 ; infill
G1 X149.480 Y86.411 E0.58090 ; infill
G1 X150.114 Y86.411 E0.02955 ; infill
G1 X158.928 Y95.225 E0.58090 ; infill
G1 X159.562 Y95.225 E0.02955 ; infill
G1 X150.748 Y86.411 E0.58090 ; infill
G1 X151.382 Y86.411 E0.02955 ; infill
G1 X160.196 Y95.225 E0.58090 ; infill
G1 X160.830 Y95.225 E0.02955 ; infill
G1 X152.016 Y86.411 E0.58090 ; infill
G1 X152.650 Y86.411 E0.02955 ; infill
G1 X161.464 Y95.225 E0.58090 ; infill
G1 X162.098 Y95.225 E0.02955 ; infill
G1 X153.284 Y86.411 E0.58090 ; infill
G1 X153.918 Y86.411 E0.02955 ; infill
G1 X162.732 Y95.225 E0.58090 ; infill
G1 X163.367 Y95.225 E0.02955 ; infill
G1 X154.552 Y86.411 E0.58090 ; infill
G1 X155.187 Y86.411 E0.02955 ; infill
G1 X164.001 Y95.225 E0.58090 ; infill
G1 X164.635 Y95.225 E0.02955 ; infill
G1 X155.821 Y86.411 E0.58090 ; infill
G1 X156.220 Y86.411 E0.01862 ; infill
G1 X156.348 Y86.304 E0.00775 ; infill
G1 X165.269 Y95.225 E0.58795 ; infill
G1 X165.903 Y95.225 E0.02955 ; infill
G1 X156.693 Y86.015 E0.60701 ; infill
G1 X157.037 Y85.726 E0.02097 ; infill
G1 X166.537 Y95.225 E0.62608 ; infill
G1 X167.171 Y95.225 E0.02955 ; infill
G1 X157.382 Y85.436 E0.64515 ; infill
G1 X157.727 Y85.147 E0.02097 ; infill
G1 X167.805 Y95.225 E0.66421 ; infill
G1 X168.439 Y95.225 E0.02955 ; infill
G1 X158.072 Y84.858 E0.68328 ; infill
G1 X158.416 Y84.568 E0.02097 ; infill
G1 X169.073 Y95.225 E0.70235 ; infill
G1 X169.707 Y95.225 E0.02955 ; infill
G1 X158.761 Y84.279 E0.72141 ; infill
G1 X159.106 Y83.990 E0.02097 ; infill
G1 X170.230 Y95.114 E0.73314 ; infill
G1 X170.575 Y94.825 E0.02097 ; infill
G1 X159.451 Y83.701 E0.73314 ; infill
G1 X159.796 Y83.411 E0.02097 ; infill
G1 X170.920 Y94.535 E0.73314 ; infill
G1 X171.265 Y94.246 E0.02097 ; infill
G1 X160.140 Y83.122 E0.73314 ; infill
G1 X160.485 Y82.833 E0.02097 ; infill
G1 X171.609 Y93.957 E0.73314 ; infill
G1 X171.954 Y93.667 E0.02097 ; infill
G1 X160.830 Y82.543 E0.73314 ; infill
G1 X161.175 Y82.254 E0.02097 ; infill
G1 X172.299 Y93.378 E0.73314 ; infill
G1 X172.644 Y93.089 E0.02097 ; infill
G1 X161.519 Y81.965 E0.73314 ; infill
G1 X161.864 Y81.675 E0.02097 ; infill
G1 X172.988 Y92.800 E0.73314 ; infill
G1 X173.333 Y92.510 E0.02097 ; infill
G1 X162.209 Y81.386 E0.73314 ; infill
G1 X162.554 Y81.097 E0.02097 ; infill
G1 X173.678 Y92.221 E0.73314 ; infill
G1 X174.023 Y91.932 E0.02097 ; infill
G1 X162.899 Y80.807 E0.73314 ; infill
G1 X163.243 Y80.518 E0.02097 ; infill
G1 X174.368 Y91.642 E0.73314 ; infill
G1 X174.712 Y91.353 E0.02097 ; infill
G1 X163.588 Y80.229 E0.73314 ; infill
G1 X163.933 Y79.940 E0.02097 ; infill
G1 X175.057 Y91.064 E0.73314 ; infill
G1 X175.402 Y90.774 E0.02097 ; infill
G1 X164.278 Y79.650 E0.73314 ; infill
G1 X164.622 Y79.361 E0.02097 ; infill
G1 X175.747 Y90.485 E0.73314 ; infill
G1 X176.091 Y90.196 E0.02097 ; infill
G1 X164.994 Y79.098 E0.73140 ; infill
G1 X165.628 Y79.098 E0.02955 ; infill
G1 X176.436 Y89.906 E0.71233 ; infill
G1 X176.781 Y89.617 E0.02097 ; infill
G1 X166.262 Y79.098 E0.69326 ; infill
G1 X166.896 Y79.098 E0.02955 ; infill
G1 X177.126 Y89.328 E0.67420 ; infill
G1 X177.471 Y89.039 E0.02097 ; infill
G1 X167.530 Y79.098 E0.65513 ; infill
G1 X168.164 Y79.098 E0.02955 ; infill
G1 X177.815 Y88.749 E0.63606 ; infill
G1 X178.160 Y88.460 E0.02097 ; infill
G1 X168.798 Y79.098 E0.61700 ; infill
G1 X169.432 Y79.098 E0.02955 ; infill
G1 X178.505 Y88.171 E0.59793 ; infill
G1 X178.850 Y87.881 E0.02097 ; infill
G1 X170.066 Y79.098 E0.57886 ; infill
G1 X170.414 Y78.812 E0.02099 ; infill
G1 X179.194 Y87.592 E0.57868 ; infill
G1 X179.539 Y87.303 E0.02097 ; infill
G1 X170.759 Y78.522 E0.57868 ; infill
G1 X171.104 Y78.233 E0.02097 ; infill
G1 X179.884 Y87.013 E0.57868 ; infill
G1 X180.229 Y86.724 E0.02097 ; infill
G1 X171.448 Y77.944 E0.57868 ; infill
G1 X171.793 Y77.654 E0.02097 ; infill
G1 X180.574 Y86.435 E0.57868 ; infill
G1 X180.918 Y86.146 E0.02097 ; infill
G1 X172.138 Y77.365 E0.57868 ; infill
G1 X172.483 Y77.076 E0.02097 ; infill
G1 X181.263 Y85.856 E0.57868 ; infill
G1 X181.608 Y85.567 E0.02097 ; infill
G1 X172.828 Y76.787 E0.57868 ; infill
G1 X173.172 Y76.497 E0.02097 ; infill
G1 X181.953 Y85.278 E0.57868 ; infill
G1 X182.297 Y84.988 E0.02097 ; infill
G1 X173.517 Y76.208 E0.57868 ; infill
G1 X173.862 Y75.919 E0.02097 ; infill
G1 X182.642 Y84.699 E0.57868 ; infill
G1 X182.987 Y84.410 E0.02097 ; infill
G1 X174.207 Y75.629 E0.57868 ; infill
G1 X174.551 Y75.340 E0.02097 ; infill
G1 X183.332 Y84.120 E0.57868 ; infill
G1 X183.677 Y83.831 E0.02097 ; infill
G1 X174.896 Y75.051 E0.57868 ; infill
G1 X175.241 Y74.761 E0.02097 ; infill
G1 X184.021 Y83.542 E0.57868 ; infill
G1 X184.366 Y83.252 E0.02097 ; infill
G1 X175.586 Y74.472 E0.57868 ; infill
G1 X175.931 Y74.183 E0.02097 ; infill
G1 X184.711 Y82.963 E0.57868 ; infill
G1 X185.056 Y82.674 E0.02097 ; infill
G1 X176.275 Y73.893 E0.57868 ; infill
G1 X176.620 Y73.604 E0.02097 ; infill
G1 X185.401 Y82.385 E0.57868 ; infill
G1 X185.745 Y82.095 E0.02097 ; infill
G1 X176.965 Y73.315 E0.57868 ; infill
G1 X177.310 Y73.026 E0.02097 ; infill
G1 X186.090 Y81.806 E0.57868 ; infill
G1 X186.435 Y81.517 E0.02097 ; infill
G1 X177.654 Y72.736 E0.57868 ; infill
G1 X177.999 Y72.447 E0.02097 ; infill
G1 X186.780 Y81.227 E0.57868 ; infill
G1 X187.124 Y80.938 E0.02097 ; infill
G1 X178.344 Y72.158 E0.57868 ; infill
G1 X178.689 Y71.868 E0.02097 ; infill
G1 X187.469 Y80.649 E0.57868 ; infill
G1 X187.814 Y80.359 E0.02097 ; infill
G1 X179.034 Y71.579 E0.57868 ; infill
G1 X179.378 Y71.290 E0.02097 ; infill
G1 X188.159 Y80.070 E0.57868 ; infill
G1 X188.504 Y79.781 E0.02097 ; infill
G1 X179.723 Y71.000 E0.57868 ; infill
G1 X180.068 Y70.711 E0.02097 ; infill
G1 X188.848 Y79.492 E0.57868 ; infill
G1 X189.193 Y79.202 E0.02097 ; infill
G1 X180.413 Y70.422 E0.57868 ; infill
G1 X180.757 Y70.133 E0.02097 ; infill
G1 X189.538 Y78.913 E0.57868 ; infill
G1 X189.883 Y78.624 E0.02097 ; infill
G1 X181.102 Y69.843 E0.57868 ; infill
G1 X181.447 Y69.554 E0.02097 ; infill
G1 X190.227 Y78.334 E0.57868 ; infill
G1 X190.572 Y78.045 E0.02097 ; infill
G1 X181.792 Y69.265 E0.57868 ; infill
G1 X182.137 Y68.975 E0.02097 ; infill
G1 X191.060 Y77.898 E0.58807 ; infill
G1 X191.271 Y77.476 F10800.000 ; move to first infill point
G1 F3600
G1 X182.481 Y68.686 E0.57929 ; infill
G1 X182.826 Y68.397 E0.02097 ; infill
G1 X187.964 Y73.535 E0.33864 ; infill
G1 F8640
G1 X185.637 Y71.208 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.850 F10800.000 ; lift Z
G1 X102.061 Y95.426 ; move to first infill point
G1 Z1.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X87.591 Y80.956 E0.95364 ; infill
G1 F8640
G1 X89.919 Y83.284 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.850 F10800.000 ; lift Z
G1 X78.913 Y77.985 ; move to first infill point
G1 Z1.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q10 S124
G1 F3600
G1 X96.154 Y95.225 E1.13623 ; infill
G1 X96.788 Y95.225 E0.02955 ; infill
G1 X80.660 Y79.098 E1.06287 ; infill
G1 X81.295 Y79.098 E0.02955 ; infill
G1 X97.422 Y95.225 E1.06287 ; infill
G1 X98.056 Y95.225 E0.02955 ; infill
G1 X81.929 Y79.098 E1.06287 ; infill
G1 X82.563 Y79.098 E0.02955 ; infill
G1 X98.690 Y95.225 E1.06287 ; infill
M73 P10 R122
G1 X99.324 Y95.225 E0.02955 ; infill
G1 X83.197 Y79.098 E1.06287 ; infill
G1 X83.831 Y79.098 E0.02955 ; infill
G1 X99.958 Y95.225 E1.06287 ; infill
G1 X100.592 Y95.225 E0.02955 ; infill
G1 X84.465 Y79.098 E1.06287 ; infill
G1 X85.064 Y79.098 E0.02793 ; infill
G1 X85.280 Y79.279 E0.01313 ; infill
G1 X101.427 Y95.426 E1.06417 ; infill
G1 F8640
G1 X99.100 Y93.099 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.850 F10800.000 ; lift Z
G1 X95.720 Y95.426 ; move to first infill point
G1 Z1.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X74.972 Y74.678 E1.36740 ; infill
G1 F8640
G1 X77.300 Y77.006 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.850 F10800.000 ; lift Z
G1 X71.032 Y71.372 ; move to first infill point
G1 Z1.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X95.086 Y95.426 E1.58533 ; infill
G1 X94.452 Y95.426 F10800.000 ; move to first infill point
G1 F3600
G1 X67.091 Y68.065 E1.80327 ; infill
G1 F8640
G1 X69.418 Y70.392 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.850 F10800.000 ; lift Z
G1 X59.027 Y77.121 ; move to first infill point
G1 Z1.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X64.307 Y82.401 E0.34801 ; infill
G1 F8640
G1 X61.980 Y80.074 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.850 F10800.000 ; lift Z
G1 X68.248 Y85.708 ; move to first infill point
G1 Z1.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X59.458 Y76.919 E0.57927 ; infill
G1 X59.748 Y76.574 E0.02097 ; infill
G1 X72.189 Y89.015 E0.81993 ; infill
G1 F8640
G1 X69.861 Y86.688 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.850 F10800.000 ; lift Z
G1 X76.130 Y92.322 ; move to first infill point
G1 Z1.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X60.037 Y76.229 E1.06059 ; infill
G1 X60.326 Y75.884 E0.02097 ; infill
G1 X79.868 Y95.426 E1.28791 ; infill
G1 X80.502 Y95.426 F10800.000 ; move to first infill point
G1 F3600
G1 X60.616 Y75.540 E1.31063 ; infill
G1 X60.905 Y75.195 E0.02097 ; infill
G1 X80.935 Y95.225 E1.32012 ; infill
G1 X81.570 Y95.225 E0.02955 ; infill
G1 X61.194 Y74.850 E1.34284 ; infill
G1 X61.484 Y74.505 E0.02097 ; infill
G1 X82.204 Y95.225 E1.36557 ; infill
G1 X82.838 Y95.225 E0.02955 ; infill
G1 X61.773 Y74.160 E1.38829 ; infill
G1 X62.062 Y73.816 E0.02097 ; infill
G1 X83.472 Y95.225 E1.41101 ; infill
G1 X84.106 Y95.225 E0.02955 ; infill
G1 X62.352 Y73.471 E1.43373 ; infill
G1 X62.641 Y73.126 E0.02097 ; infill
G1 X84.740 Y95.225 E1.45646 ; infill
G1 X85.374 Y95.225 E0.02955 ; infill
G1 X62.930 Y72.781 E1.47918 ; infill
G1 X63.219 Y72.437 E0.02097 ; infill
G1 X86.008 Y95.225 E1.50190 ; infill
G1 X86.642 Y95.225 E0.02955 ; infill
G1 X63.509 Y72.092 E1.52463 ; infill
G1 X63.798 Y71.747 E0.02097 ; infill
G1 X87.276 Y95.225 E1.54735 ; infill
G1 X87.910 Y95.225 E0.02955 ; infill
G1 X64.087 Y71.402 E1.57007 ; infill
G1 X64.377 Y71.057 E0.02097 ; infill
G1 X88.545 Y95.225 E1.59280 ; infill
G1 X89.179 Y95.225 E0.02955 ; infill
G1 X64.666 Y70.713 E1.61552 ; infill
G1 X64.955 Y70.368 E0.02097 ; infill
G1 X89.813 Y95.225 E1.63824 ; infill
G1 X90.447 Y95.225 E0.02955 ; infill
G1 X65.245 Y70.023 E1.66096 ; infill
G1 X65.534 Y69.678 E0.02097 ; infill
G1 X91.081 Y95.225 E1.68369 ; infill
G1 X91.715 Y95.225 E0.02955 ; infill
G1 X65.823 Y69.334 E1.70641 ; infill
G1 X66.112 Y68.989 E0.02097 ; infill
G1 X92.349 Y95.225 E1.72913 ; infill
G1 X92.983 Y95.225 E0.02955 ; infill
G1 X66.402 Y68.644 E1.75186 ; infill
G1 X66.691 Y68.299 E0.02097 ; infill
G1 X93.818 Y95.426 E1.78782 ; infill
G1 F8640
G1 X91.491 Y93.099 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.850 F10800.000 ; lift Z
G1 X124.715 Y133.687 ; move to first perimeter point
G1 Z1.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.502 Y133.687 E1.86256 ; perimeter
G1 X58.161 Y115.780 E1.14768 ; perimeter
G1 X66.518 Y105.820 E0.53563 ; perimeter
G1 X79.757 Y116.928 E0.71194 ; perimeter
G1 X84.894 Y116.928 E0.21162 ; perimeter
G1 X93.610 Y124.241 E0.46869 ; perimeter
G1 X155.820 Y124.241 E2.56281 ; perimeter
G1 X164.535 Y116.928 E0.46869 ; perimeter
G1 X169.672 Y116.928 E0.21162 ; perimeter
G1 X182.911 Y105.820 E0.71194 ; perimeter
G1 X191.269 Y115.780 E0.53563 ; perimeter
G1 X169.927 Y133.687 E1.14768 ; perimeter
G1 X124.775 Y133.687 E1.86009 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y134.084 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.358 Y134.084 E1.86851 ; perimeter
G1 X57.602 Y115.829 E1.16996 ; perimeter
G1 X66.470 Y105.261 E0.56829 ; perimeter
G1 X79.901 Y116.532 E0.72233 ; perimeter
G1 X85.038 Y116.532 E0.21162 ; perimeter
G1 X93.754 Y123.845 E0.46869 ; perimeter
G1 X155.676 Y123.845 E2.55092 ; perimeter
G1 X164.391 Y116.532 E0.46869 ; perimeter
G1 X169.528 Y116.532 E0.21162 ; perimeter
G1 X182.960 Y105.261 E0.72233 ; perimeter
G1 X191.827 Y115.829 E0.56829 ; perimeter
G1 X170.072 Y134.084 E1.16996 ; perimeter
G1 X124.775 Y134.084 E1.86603 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y134.480 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.214 Y134.480 E1.87445 ; perimeter
G1 X57.044 Y115.878 E1.19223 ; perimeter
G1 X66.421 Y104.703 E0.60094 ; perimeter
G1 X80.046 Y116.136 E0.73271 ; perimeter
G1 X85.183 Y116.136 E0.21162 ; perimeter
G1 X93.898 Y123.449 E0.46869 ; perimeter
G1 X155.532 Y123.449 E2.53904 ; perimeter
G1 X164.247 Y116.136 E0.46869 ; perimeter
G1 X169.384 Y116.136 E0.21162 ; perimeter
G1 X183.009 Y104.703 E0.73271 ; perimeter
G1 X192.386 Y115.878 E0.60094 ; perimeter
G1 X170.216 Y134.480 E1.19223 ; perimeter
G1 X124.775 Y134.480 E1.87198 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.485 Y134.153 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y134.480 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.850 F10800.000 ; lift Z
G1 X102.410 Y133.572 ; move to first infill point
G1 Z1.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X91.247 Y122.409 E0.73570 ; infill
G1 F8640
G1 X93.574 Y124.737 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.850 F10800.000 ; lift Z
G1 X93.828 Y124.357 ; move to first infill point
G1 Z1.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X102.843 Y133.371 E0.59413 ; infill
G1 X103.477 Y133.371 E0.02955 ; infill
G1 X94.663 Y124.557 E0.58090 ; infill
G1 X95.297 Y124.557 E0.02955 ; infill
G1 X104.111 Y133.371 E0.58090 ; infill
G1 X104.746 Y133.371 E0.02955 ; infill
G1 X95.931 Y124.557 E0.58090 ; infill
G1 X96.566 Y124.557 E0.02955 ; infill
G1 X105.380 Y133.371 E0.58090 ; infill
G1 X106.014 Y133.371 E0.02955 ; infill
G1 X97.200 Y124.557 E0.58090 ; infill
G1 X97.834 Y124.557 E0.02955 ; infill
G1 X106.648 Y133.371 E0.58090 ; infill
G1 X107.282 Y133.371 E0.02955 ; infill
G1 X98.468 Y124.557 E0.58090 ; infill
G1 X99.102 Y124.557 E0.02955 ; infill
G1 X107.916 Y133.371 E0.58090 ; infill
G1 X108.550 Y133.371 E0.02955 ; infill
G1 X99.736 Y124.557 E0.58090 ; infill
G1 X100.370 Y124.557 E0.02955 ; infill
G1 X109.184 Y133.371 E0.58090 ; infill
G1 X109.818 Y133.371 E0.02955 ; infill
G1 X101.004 Y124.557 E0.58090 ; infill
G1 X101.638 Y124.557 E0.02955 ; infill
G1 X110.452 Y133.371 E0.58090 ; infill
G1 X111.086 Y133.371 E0.02955 ; infill
G1 X102.272 Y124.557 E0.58090 ; infill
G1 X102.906 Y124.557 E0.02955 ; infill
G1 X111.720 Y133.371 E0.58090 ; infill
G1 X112.355 Y133.371 E0.02955 ; infill
G1 X103.540 Y124.557 E0.58090 ; infill
G1 X104.175 Y124.557 E0.02955 ; infill
G1 X112.989 Y133.371 E0.58090 ; infill
G1 X113.623 Y133.371 E0.02955 ; infill
G1 X104.809 Y124.557 E0.58090 ; infill
G1 X105.443 Y124.557 E0.02955 ; infill
G1 X114.257 Y133.371 E0.58090 ; infill
G1 X114.891 Y133.371 E0.02955 ; infill
G1 X106.077 Y124.557 E0.58090 ; infill
G1 X106.711 Y124.557 E0.02955 ; infill
G1 X115.525 Y133.371 E0.58090 ; infill
G1 X116.159 Y133.371 E0.02955 ; infill
G1 X107.345 Y124.557 E0.58090 ; infill
G1 X107.979 Y124.557 E0.02955 ; infill
G1 X116.793 Y133.371 E0.58090 ; infill
G1 X117.427 Y133.371 E0.02955 ; infill
G1 X108.613 Y124.557 E0.58090 ; infill
G1 X109.247 Y124.557 E0.02955 ; infill
G1 X118.061 Y133.371 E0.58090 ; infill
G1 X118.695 Y133.371 E0.02955 ; infill
G1 X109.881 Y124.557 E0.58090 ; infill
G1 X110.515 Y124.557 E0.02955 ; infill
G1 X119.329 Y133.371 E0.58090 ; infill
G1 X119.964 Y133.371 E0.02955 ; infill
G1 X111.149 Y124.557 E0.58090 ; infill
G1 X111.784 Y124.557 E0.02955 ; infill
G1 X120.598 Y133.371 E0.58090 ; infill
G1 X121.232 Y133.371 E0.02955 ; infill
G1 X112.418 Y124.557 E0.58090 ; infill
G1 X113.052 Y124.557 E0.02955 ; infill
G1 X121.866 Y133.371 E0.58090 ; infill
G1 X122.500 Y133.371 E0.02955 ; infill
G1 X113.686 Y124.557 E0.58090 ; infill
G1 X114.320 Y124.557 E0.02955 ; infill
G1 X123.134 Y133.371 E0.58090 ; infill
G1 X123.768 Y133.371 E0.02955 ; infill
G1 X114.954 Y124.557 E0.58090 ; infill
G1 X115.588 Y124.557 E0.02955 ; infill
G1 X124.402 Y133.371 E0.58090 ; infill
G1 X125.036 Y133.371 E0.02955 ; infill
G1 X116.222 Y124.557 E0.58090 ; infill
G1 X116.856 Y124.557 E0.02955 ; infill
G1 X125.670 Y133.371 E0.58090 ; infill
G1 X126.304 Y133.371 E0.02955 ; infill
G1 X117.490 Y124.557 E0.58090 ; infill
G1 X118.124 Y124.557 E0.02955 ; infill
G1 X126.939 Y133.371 E0.58090 ; infill
G1 X127.573 Y133.371 E0.02955 ; infill
G1 X118.759 Y124.557 E0.58090 ; infill
G1 X119.393 Y124.557 E0.02955 ; infill
G1 X128.207 Y133.371 E0.58090 ; infill
G1 X128.841 Y133.371 E0.02955 ; infill
G1 X120.027 Y124.557 E0.58090 ; infill
G1 X120.661 Y124.557 E0.02955 ; infill
G1 X129.475 Y133.371 E0.58090 ; infill
G1 X130.109 Y133.371 E0.02955 ; infill
G1 X121.295 Y124.557 E0.58090 ; infill
G1 X121.929 Y124.557 E0.02955 ; infill
G1 X130.743 Y133.371 E0.58090 ; infill
G1 X131.377 Y133.371 E0.02955 ; infill
G1 X122.563 Y124.557 E0.58090 ; infill
G1 X123.197 Y124.557 E0.02955 ; infill
G1 X132.011 Y133.371 E0.58090 ; infill
G1 X132.645 Y133.371 E0.02955 ; infill
G1 X123.831 Y124.557 E0.58090 ; infill
G1 X124.465 Y124.557 E0.02955 ; infill
G1 X133.279 Y133.371 E0.58090 ; infill
G1 X133.913 Y133.371 E0.02955 ; infill
G1 X125.099 Y124.557 E0.58090 ; infill
G1 X125.733 Y124.557 E0.02955 ; infill
G1 X134.548 Y133.371 E0.58090 ; infill
G1 X135.182 Y133.371 E0.02955 ; infill
G1 X126.368 Y124.557 E0.58090 ; infill
G1 X127.002 Y124.557 E0.02955 ; infill
G1 X135.816 Y133.371 E0.58090 ; infill
G1 X136.450 Y133.371 E0.02955 ; infill
G1 X127.636 Y124.557 E0.58090 ; infill
G1 X128.270 Y124.557 E0.02955 ; infill
G1 X137.084 Y133.371 E0.58090 ; infill
G1 X137.718 Y133.371 E0.02955 ; infill
G1 X128.904 Y124.557 E0.58090 ; infill
G1 X129.538 Y124.557 E0.02955 ; infill
G1 X138.352 Y133.371 E0.58090 ; infill
G1 X138.986 Y133.371 E0.02955 ; infill
G1 X130.172 Y124.557 E0.58090 ; infill
G1 X130.806 Y124.557 E0.02955 ; infill
G1 X139.620 Y133.371 E0.58090 ; infill
G1 X140.254 Y133.371 E0.02955 ; infill
G1 X131.440 Y124.557 E0.58090 ; infill
G1 X132.074 Y124.557 E0.02955 ; infill
G1 X140.888 Y133.371 E0.58090 ; infill
G1 X141.522 Y133.371 E0.02955 ; infill
G1 X132.708 Y124.557 E0.58090 ; infill
G1 X133.342 Y124.557 E0.02955 ; infill
G1 X142.157 Y133.371 E0.58090 ; infill
G1 X142.791 Y133.371 E0.02955 ; infill
G1 X133.977 Y124.557 E0.58090 ; infill
G1 X134.611 Y124.557 E0.02955 ; infill
G1 X143.425 Y133.371 E0.58090 ; infill
G1 X144.059 Y133.371 E0.02955 ; infill
G1 X135.245 Y124.557 E0.58090 ; infill
M73 Q10 S123
G1 X135.879 Y124.557 E0.02955 ; infill
G1 X144.693 Y133.371 E0.58090 ; infill
G1 X145.327 Y133.371 E0.02955 ; infill
G1 X136.513 Y124.557 E0.58090 ; infill
G1 X137.147 Y124.557 E0.02955 ; infill
G1 X145.961 Y133.371 E0.58090 ; infill
G1 X146.595 Y133.371 E0.02955 ; infill
G1 X137.781 Y124.557 E0.58090 ; infill
G1 X138.415 Y124.557 E0.02955 ; infill
G1 X147.229 Y133.371 E0.58090 ; infill
G1 X147.863 Y133.371 E0.02955 ; infill
G1 X139.049 Y124.557 E0.58090 ; infill
G1 X139.683 Y124.557 E0.02955 ; infill
G1 X148.497 Y133.371 E0.58090 ; infill
G1 X149.132 Y133.371 E0.02955 ; infill
G1 X140.317 Y124.557 E0.58090 ; infill
M73 P11 R121
G1 X140.952 Y124.557 E0.02955 ; infill
G1 X149.766 Y133.371 E0.58090 ; infill
G1 X150.400 Y133.371 E0.02955 ; infill
G1 X141.586 Y124.557 E0.58090 ; infill
G1 X142.220 Y124.557 E0.02955 ; infill
G1 X151.034 Y133.371 E0.58090 ; infill
G1 X151.668 Y133.371 E0.02955 ; infill
G1 X142.854 Y124.557 E0.58090 ; infill
G1 X143.488 Y124.557 E0.02955 ; infill
G1 X152.302 Y133.371 E0.58090 ; infill
G1 X152.936 Y133.371 E0.02955 ; infill
G1 X144.122 Y124.557 E0.58090 ; infill
G1 X144.756 Y124.557 E0.02955 ; infill
G1 X153.570 Y133.371 E0.58090 ; infill
G1 X154.204 Y133.371 E0.02955 ; infill
G1 X145.390 Y124.557 E0.58090 ; infill
G1 X146.024 Y124.557 E0.02955 ; infill
G1 X154.838 Y133.371 E0.58090 ; infill
G1 X155.472 Y133.371 E0.02955 ; infill
G1 X146.658 Y124.557 E0.58090 ; infill
G1 X147.292 Y124.557 E0.02955 ; infill
G1 X156.106 Y133.371 E0.58090 ; infill
G1 X156.741 Y133.371 E0.02955 ; infill
G1 X147.926 Y124.557 E0.58090 ; infill
G1 X148.561 Y124.557 E0.02955 ; infill
G1 X157.375 Y133.371 E0.58090 ; infill
G1 X158.009 Y133.371 E0.02955 ; infill
G1 X149.195 Y124.557 E0.58090 ; infill
G1 X149.829 Y124.557 E0.02955 ; infill
G1 X158.643 Y133.371 E0.58090 ; infill
G1 X159.277 Y133.371 E0.02955 ; infill
G1 X150.463 Y124.557 E0.58090 ; infill
G1 X151.097 Y124.557 E0.02955 ; infill
G1 X159.911 Y133.371 E0.58090 ; infill
G1 X160.545 Y133.371 E0.02955 ; infill
G1 X151.731 Y124.557 E0.58090 ; infill
G1 X152.365 Y124.557 E0.02955 ; infill
G1 X161.179 Y133.371 E0.58090 ; infill
G1 X161.813 Y133.371 E0.02955 ; infill
G1 X152.999 Y124.557 E0.58090 ; infill
G1 X153.633 Y124.557 E0.02955 ; infill
G1 X162.447 Y133.371 E0.58090 ; infill
G1 X163.081 Y133.371 E0.02955 ; infill
G1 X154.267 Y124.557 E0.58090 ; infill
G1 X154.901 Y124.557 E0.02955 ; infill
G1 X163.715 Y133.371 E0.58090 ; infill
G1 X164.350 Y133.371 E0.02955 ; infill
G1 X155.535 Y124.557 E0.58090 ; infill
G1 X155.935 Y124.557 E0.01862 ; infill
G1 X156.063 Y124.450 E0.00775 ; infill
G1 X164.984 Y133.371 E0.58795 ; infill
G1 X165.618 Y133.371 E0.02955 ; infill
G1 X156.407 Y124.161 E0.60701 ; infill
G1 X156.752 Y123.872 E0.02097 ; infill
G1 X166.252 Y133.371 E0.62608 ; infill
G1 X166.886 Y133.371 E0.02955 ; infill
G1 X157.097 Y123.582 E0.64515 ; infill
G1 X157.442 Y123.293 E0.02097 ; infill
G1 X167.520 Y133.371 E0.66421 ; infill
G1 X168.154 Y133.371 E0.02955 ; infill
G1 X157.786 Y123.004 E0.68328 ; infill
G1 X158.131 Y122.715 E0.02097 ; infill
G1 X168.788 Y133.371 E0.70235 ; infill
G1 X169.422 Y133.371 E0.02955 ; infill
G1 X158.476 Y122.425 E0.72141 ; infill
G1 X158.821 Y122.136 E0.02097 ; infill
G1 X169.945 Y133.260 E0.73314 ; infill
G1 X170.290 Y132.971 E0.02097 ; infill
G1 X159.166 Y121.847 E0.73314 ; infill
G1 X159.510 Y121.557 E0.02097 ; infill
G1 X170.635 Y132.682 E0.73314 ; infill
G1 X170.979 Y132.392 E0.02097 ; infill
G1 X159.855 Y121.268 E0.73314 ; infill
G1 X160.200 Y120.979 E0.02097 ; infill
G1 X171.324 Y132.103 E0.73314 ; infill
G1 X171.669 Y131.814 E0.02097 ; infill
G1 X160.545 Y120.689 E0.73314 ; infill
G1 X160.890 Y120.400 E0.02097 ; infill
G1 X172.014 Y131.524 E0.73314 ; infill
G1 X172.358 Y131.235 E0.02097 ; infill
G1 X161.234 Y120.111 E0.73314 ; infill
G1 X161.579 Y119.822 E0.02097 ; infill
G1 X172.703 Y130.946 E0.73314 ; infill
G1 X173.048 Y130.656 E0.02097 ; infill
G1 X161.924 Y119.532 E0.73314 ; infill
G1 X162.269 Y119.243 E0.02097 ; infill
G1 X173.393 Y130.367 E0.73314 ; infill
G1 X173.738 Y130.078 E0.02097 ; infill
G1 X162.613 Y118.954 E0.73314 ; infill
G1 X162.958 Y118.664 E0.02097 ; infill
G1 X174.082 Y129.788 E0.73314 ; infill
G1 X174.427 Y129.499 E0.02097 ; infill
G1 X163.303 Y118.375 E0.73314 ; infill
G1 X163.648 Y118.086 E0.02097 ; infill
G1 X174.772 Y129.210 E0.73314 ; infill
G1 X175.117 Y128.921 E0.02097 ; infill
G1 X163.993 Y117.796 E0.73314 ; infill
G1 X164.337 Y117.507 E0.02097 ; infill
G1 X175.461 Y128.631 E0.73314 ; infill
G1 X175.806 Y128.342 E0.02097 ; infill
G1 X164.709 Y117.244 E0.73140 ; infill
G1 X165.343 Y117.244 E0.02955 ; infill
G1 X176.151 Y128.053 E0.71233 ; infill
G1 X176.496 Y127.763 E0.02097 ; infill
G1 X165.977 Y117.244 E0.69326 ; infill
G1 X166.611 Y117.244 E0.02955 ; infill
G1 X176.841 Y127.474 E0.67420 ; infill
G1 X177.185 Y127.185 E0.02097 ; infill
G1 X167.245 Y117.244 E0.65513 ; infill
G1 X167.879 Y117.244 E0.02955 ; infill
G1 X177.530 Y126.895 E0.63606 ; infill
G1 X177.875 Y126.606 E0.02097 ; infill
G1 X168.513 Y117.244 E0.61700 ; infill
G1 X169.147 Y117.244 E0.02955 ; infill
G1 X178.220 Y126.317 E0.59793 ; infill
G1 X178.565 Y126.028 E0.02097 ; infill
G1 X169.781 Y117.244 E0.57886 ; infill
G1 X170.129 Y116.958 E0.02099 ; infill
G1 X178.909 Y125.738 E0.57868 ; infill
G1 X179.254 Y125.449 E0.02097 ; infill
G1 X170.474 Y116.669 E0.57868 ; infill
G1 X170.818 Y116.379 E0.02097 ; infill
G1 X179.599 Y125.160 E0.57868 ; infill
G1 X179.944 Y124.870 E0.02097 ; infill
G1 X171.163 Y116.090 E0.57868 ; infill
G1 X171.508 Y115.801 E0.02097 ; infill
G1 X180.288 Y124.581 E0.57868 ; infill
G1 X180.633 Y124.292 E0.02097 ; infill
G1 X171.853 Y115.511 E0.57868 ; infill
G1 X172.198 Y115.222 E0.02097 ; infill
G1 X180.978 Y124.002 E0.57868 ; infill
G1 X181.323 Y123.713 E0.02097 ; infill
G1 X172.542 Y114.933 E0.57868 ; infill
G1 X172.887 Y114.643 E0.02097 ; infill
G1 X181.668 Y123.424 E0.57868 ; infill
G1 X182.012 Y123.134 E0.02097 ; infill
G1 X173.232 Y114.354 E0.57868 ; infill
G1 X173.577 Y114.065 E0.02097 ; infill
G1 X182.357 Y122.845 E0.57868 ; infill
G1 X182.702 Y122.556 E0.02097 ; infill
G1 X173.921 Y113.775 E0.57868 ; infill
G1 X174.266 Y113.486 E0.02097 ; infill
G1 X183.047 Y122.267 E0.57868 ; infill
G1 X183.391 Y121.977 E0.02097 ; infill
G1 X174.611 Y113.197 E0.57868 ; infill
G1 X174.956 Y112.908 E0.02097 ; infill
G1 X183.736 Y121.688 E0.57868 ; infill
G1 X184.081 Y121.399 E0.02097 ; infill
G1 X175.301 Y112.618 E0.57868 ; infill
G1 X175.645 Y112.329 E0.02097 ; infill
G1 X184.426 Y121.109 E0.57868 ; infill
G1 X184.771 Y120.820 E0.02097 ; infill
G1 X175.990 Y112.040 E0.57868 ; infill
G1 X176.335 Y111.750 E0.02097 ; infill
G1 X185.115 Y120.531 E0.57868 ; infill
G1 X185.460 Y120.241 E0.02097 ; infill
G1 X176.680 Y111.461 E0.57868 ; infill
G1 X177.025 Y111.172 E0.02097 ; infill
G1 X185.805 Y119.952 E0.57868 ; infill
G1 X186.150 Y119.663 E0.02097 ; infill
G1 X177.369 Y110.882 E0.57868 ; infill
G1 X177.714 Y110.593 E0.02097 ; infill
G1 X186.494 Y119.373 E0.57868 ; infill
G1 X186.839 Y119.084 E0.02097 ; infill
G1 X178.059 Y110.304 E0.57868 ; infill
G1 X178.404 Y110.014 E0.02097 ; infill
G1 X187.184 Y118.795 E0.57868 ; infill
G1 X187.529 Y118.506 E0.02097 ; infill
G1 X178.748 Y109.725 E0.57868 ; infill
G1 X179.093 Y109.436 E0.02097 ; infill
G1 X187.874 Y118.216 E0.57868 ; infill
G1 X188.218 Y117.927 E0.02097 ; infill
G1 X179.438 Y109.147 E0.57868 ; infill
G1 X179.783 Y108.857 E0.02097 ; infill
G1 X188.563 Y117.638 E0.57868 ; infill
G1 X188.908 Y117.348 E0.02097 ; infill
G1 X180.128 Y108.568 E0.57868 ; infill
G1 X180.472 Y108.279 E0.02097 ; infill
G1 X189.253 Y117.059 E0.57868 ; infill
G1 X189.597 Y116.770 E0.02097 ; infill
G1 X180.817 Y107.989 E0.57868 ; infill
G1 X181.162 Y107.700 E0.02097 ; infill
G1 X189.942 Y116.480 E0.57868 ; infill
G1 X190.287 Y116.191 E0.02097 ; infill
G1 X181.507 Y107.411 E0.57868 ; infill
G1 X181.851 Y107.121 E0.02097 ; infill
G1 X190.774 Y116.044 E0.58807 ; infill
G1 X190.986 Y115.622 F10800.000 ; move to first infill point
G1 F3600
G1 X182.196 Y106.832 E0.57929 ; infill
G1 X182.541 Y106.543 E0.02097 ; infill
G1 X187.679 Y111.681 E0.33864 ; infill
G1 F8640
G1 X185.352 Y109.354 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.850 F10800.000 ; lift Z
G1 X101.776 Y133.572 ; move to first infill point
G1 Z1.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X87.306 Y119.103 E0.95364 ; infill
G1 F8640
G1 X89.634 Y121.430 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.850 F10800.000 ; lift Z
G1 X78.628 Y116.131 ; move to first infill point
G1 Z1.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X95.868 Y133.371 E1.13623 ; infill
G1 X96.502 Y133.371 E0.02955 ; infill
G1 X80.375 Y117.244 E1.06287 ; infill
G1 X81.009 Y117.244 E0.02955 ; infill
G1 X97.137 Y133.371 E1.06287 ; infill
G1 X97.771 Y133.371 E0.02955 ; infill
G1 X81.643 Y117.244 E1.06287 ; infill
G1 X82.278 Y117.244 E0.02955 ; infill
G1 X98.405 Y133.371 E1.06287 ; infill
G1 X99.039 Y133.371 E0.02955 ; infill
G1 X82.912 Y117.244 E1.06287 ; infill
G1 X83.546 Y117.244 E0.02955 ; infill
G1 X99.673 Y133.371 E1.06287 ; infill
G1 X100.307 Y133.371 E0.02955 ; infill
G1 X84.180 Y117.244 E1.06287 ; infill
G1 X84.779 Y117.244 E0.02793 ; infill
G1 X84.995 Y117.425 E0.01313 ; infill
G1 X101.142 Y133.572 E1.06417 ; infill
G1 F8640
G1 X98.814 Y131.245 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.850 F10800.000 ; lift Z
G1 X95.435 Y133.572 ; move to first infill point
G1 Z1.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X74.687 Y112.824 E1.36740 ; infill
G1 F8640
G1 X77.015 Y115.152 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.850 F10800.000 ; lift Z
G1 X70.746 Y109.518 ; move to first infill point
G1 Z1.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X94.801 Y133.572 E1.58533 ; infill
G1 X94.167 Y133.572 F10800.000 ; move to first infill point
G1 F3600
G1 X66.806 Y106.211 E1.80327 ; infill
G1 F8640
G1 X69.133 Y108.538 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.850 F10800.000 ; lift Z
G1 X58.741 Y115.267 ; move to first infill point
G1 Z1.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X64.022 Y120.548 E0.34801 ; infill
G1 F8640
G1 X61.694 Y118.220 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.850 F10800.000 ; lift Z
G1 X67.963 Y123.854 ; move to first infill point
G1 Z1.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X59.173 Y115.065 E0.57927 ; infill
G1 X59.463 Y114.720 E0.02097 ; infill
G1 X71.904 Y127.161 E0.81993 ; infill
G1 F8640
G1 X69.576 Y124.834 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.850 F10800.000 ; lift Z
G1 X75.844 Y130.468 ; move to first infill point
G1 Z1.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X59.752 Y114.375 E1.06059 ; infill
G1 X60.041 Y114.031 E0.02097 ; infill
G1 X79.583 Y133.572 E1.28791 ; infill
G1 X80.217 Y133.572 F10800.000 ; move to first infill point
G1 F3600
G1 X60.330 Y113.686 E1.31063 ; infill
G1 X60.620 Y113.341 E0.02097 ; infill
G1 X80.650 Y133.371 E1.32012 ; infill
G1 X81.284 Y133.371 E0.02955 ; infill
G1 X60.909 Y112.996 E1.34284 ; infill
G1 X61.198 Y112.651 E0.02097 ; infill
G1 X81.918 Y133.371 E1.36557 ; infill
G1 X82.553 Y133.371 E0.02955 ; infill
G1 X61.488 Y112.307 E1.38829 ; infill
G1 X61.777 Y111.962 E0.02097 ; infill
G1 X83.187 Y133.371 E1.41101 ; infill
G1 X83.821 Y133.371 E0.02955 ; infill
G1 X62.066 Y111.617 E1.43373 ; infill
G1 X62.356 Y111.272 E0.02097 ; infill
G1 X84.455 Y133.371 E1.45646 ; infill
G1 X85.089 Y133.371 E0.02955 ; infill
G1 X62.645 Y110.927 E1.47918 ; infill
G1 X62.934 Y110.583 E0.02097 ; infill
G1 X85.723 Y133.371 E1.50190 ; infill
G1 X86.357 Y133.371 E0.02955 ; infill
G1 X63.224 Y110.238 E1.52463 ; infill
G1 X63.513 Y109.893 E0.02097 ; infill
G1 X86.991 Y133.371 E1.54735 ; infill
G1 X87.625 Y133.371 E0.02955 ; infill
G1 X63.802 Y109.548 E1.57007 ; infill
G1 X64.091 Y109.204 E0.02097 ; infill
G1 X88.259 Y133.371 E1.59280 ; infill
G1 X88.893 Y133.371 E0.02955 ; infill
G1 X64.381 Y108.859 E1.61552 ; infill
G1 X64.670 Y108.514 E0.02097 ; infill
G1 X89.527 Y133.371 E1.63824 ; infill
G1 X90.162 Y133.371 E0.02955 ; infill
G1 X64.959 Y108.169 E1.66096 ; infill
G1 X65.249 Y107.824 E0.02097 ; infill
G1 X90.796 Y133.371 E1.68369 ; infill
G1 X91.430 Y133.371 E0.02955 ; infill
G1 X65.538 Y107.480 E1.70641 ; infill
G1 X65.827 Y107.135 E0.02097 ; infill
G1 X92.064 Y133.371 E1.72913 ; infill
G1 X92.698 Y133.371 E0.02955 ; infill
G1 X66.117 Y106.790 E1.75186 ; infill
G1 X66.406 Y106.445 E0.02097 ; infill
G1 X93.533 Y133.572 E1.78782 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;1.5


G1 F8640
G1 X91.205 Y131.245 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z1.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;1.5
G1 X125.000 Y95.196 ; move to first perimeter point
G1 Z1.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.913 Y95.196 E1.85739 ; perimeter
G1 X76.520 Y92.349 E0.18247 ; perimeter
G1 X86.556 Y80.388 E0.64322 ; perimeter
G1 X93.769 Y86.440 E0.38789 ; perimeter
G1 X156.231 Y86.440 E2.57316 ; perimeter
G1 X163.444 Y80.388 E0.38789 ; perimeter
G1 X173.480 Y92.349 E0.64322 ; perimeter
G1 X170.087 Y95.196 E0.18247 ; perimeter
G1 X125.060 Y95.196 E1.85492 ; perimeter
M73 Q11 S122
M204 S1000 ; adjust acceleration
G1 X125.000 Y94.800 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X80.057 Y94.800 E1.85145 ; perimeter
G1 X77.078 Y92.300 E0.16020 ; perimeter
G1 X86.605 Y80.947 E0.61056 ; perimeter
G1 X93.625 Y86.837 E0.37750 ; perimeter
G1 X156.375 Y86.837 E2.58505 ; perimeter
M73 P11 R120
G1 X163.395 Y80.947 E0.37750 ; perimeter
G1 X172.922 Y92.300 E0.61056 ; perimeter
G1 X169.943 Y94.800 E0.16020 ; perimeter
G1 X125.060 Y94.800 E1.84897 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.806 Y95.150 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y94.800 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.100 F10800.000 ; lift Z
G1 X173.890 Y92.005 ; move to first perimeter point
G1 Z1.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X171.411 Y89.051 E0.15886 ; perimeter
G1 X174.330 Y86.602 E0.15696 ; perimeter
G1 X173.986 Y86.192 E0.02205 ; perimeter
G1 X171.067 Y88.641 E0.15696 ; perimeter
G1 X164.391 Y80.684 E0.42789 ; perimeter
G1 X166.246 Y79.127 E0.09977 ; perimeter
G1 X170.083 Y79.127 E0.15807 ; perimeter
G1 X183.348 Y67.997 E0.71336 ; perimeter
G1 X184.684 Y69.589 E0.08561 ; perimeter
G1 X182.098 Y71.758 E0.13906 ; perimeter
G1 X182.443 Y72.168 E0.02205 ; perimeter
G1 X185.028 Y69.999 E0.13906 ; perimeter
G1 X188.439 Y74.064 E0.21861 ; perimeter
G1 X185.854 Y76.234 E0.13906 ; perimeter
G1 X186.198 Y76.644 E0.02205 ; perimeter
G1 X188.784 Y74.474 E0.13906 ; perimeter
G1 X191.262 Y77.428 E0.15886 ; perimeter
G1 X173.936 Y91.966 E0.93175 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.939 Y91.446 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.970 Y89.100 E0.12620 ; perimeter
G1 X174.888 Y86.651 E0.15696 ; perimeter
G1 X174.035 Y85.633 E0.05471 ; perimeter
G1 X171.116 Y88.082 E0.15696 ; perimeter
G1 X164.949 Y80.733 E0.39523 ; perimeter
G1 X166.390 Y79.524 E0.07750 ; perimeter
G1 X170.228 Y79.524 E0.15807 ; perimeter
G1 X183.300 Y68.555 E0.70298 ; perimeter
G1 X184.126 Y69.540 E0.05296 ; perimeter
G1 X181.540 Y71.709 E0.13906 ; perimeter
G1 X182.394 Y72.727 E0.05471 ; perimeter
G1 X184.980 Y70.557 E0.13906 ; perimeter
G1 X187.881 Y74.015 E0.18596 ; perimeter
G1 X185.295 Y76.185 E0.13906 ; perimeter
G1 X186.149 Y77.202 E0.05471 ; perimeter
G1 X188.735 Y75.032 E0.13906 ; perimeter
G1 X190.704 Y77.379 E0.12620 ; perimeter
G1 X173.985 Y91.408 E0.89910 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.645 Y91.718 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.970 Y89.100 E-0.70751 ; wipe and retract
G1 X172.144 Y88.954 E-0.05249 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.100 F10800.000 ; lift Z
G1 X125.000 Y95.716 ; move to first perimeter point
G1 Z1.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.724 Y95.716 E1.86519 ; perimeter
G1 X58.199 Y77.655 E1.15752 ; perimeter
G1 X58.279 Y77.560 E0.00510 ; perimeter
G1 X79.769 Y95.592 E1.15566 ; perimeter
G1 X170.231 Y95.592 E3.72666 ; perimeter
G1 X191.721 Y77.560 E1.15566 ; perimeter
G1 X191.801 Y77.655 E0.00510 ; perimeter
G1 X170.276 Y95.716 E1.15752 ; perimeter
G1 X125.060 Y95.716 E1.86272 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y95.716 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.100 F10800.000 ; lift Z
G1 X125.000 Y86.044 ; move to first perimeter point
G1 Z1.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X93.913 Y86.044 E1.28064 ; perimeter
G1 X86.507 Y79.830 E0.39827 ; perimeter
G1 X85.970 Y80.470 E0.03442 ; perimeter
G1 X83.898 Y78.731 E0.11144 ; perimeter
G1 X80.061 Y78.731 E0.15807 ; perimeter
G1 X66.702 Y67.522 E0.71839 ; perimeter
G1 X66.782 Y67.427 E0.00510 ; perimeter
G1 X80.106 Y78.607 E0.71653 ; perimeter
G1 X85.243 Y78.607 E0.21162 ; perimeter
G1 X93.958 Y85.920 E0.46869 ; perimeter
G1 X156.042 Y85.920 E2.55756 ; perimeter
G1 X164.757 Y78.607 E0.46869 ; perimeter
G1 X169.894 Y78.607 E0.21162 ; perimeter
G1 X183.218 Y67.427 E0.71653 ; perimeter
G1 X183.298 Y67.522 E0.00510 ; perimeter
G1 X169.939 Y78.731 E0.71839 ; perimeter
G1 X166.102 Y78.731 E0.15807 ; perimeter
G1 X164.030 Y80.470 E0.11144 ; perimeter
G1 X163.493 Y79.830 E0.03442 ; perimeter
G1 X156.087 Y86.044 E0.39827 ; perimeter
G1 X125.060 Y86.044 E1.27817 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y86.044 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.100 F10800.000 ; lift Z
G1 X76.110 Y92.005 ; move to first perimeter point
G1 Z1.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X58.738 Y77.428 E0.93423 ; perimeter
G1 X61.216 Y74.474 E0.15886 ; perimeter
G1 X63.802 Y76.644 E0.13906 ; perimeter
G1 X64.146 Y76.234 E0.02205 ; perimeter
G1 X61.561 Y74.064 E0.13906 ; perimeter
G1 X64.972 Y69.999 E0.21861 ; perimeter
G1 X67.557 Y72.168 E0.13906 ; perimeter
G1 X67.902 Y71.758 E0.02205 ; perimeter
G1 X65.316 Y69.589 E0.13906 ; perimeter
G1 X66.652 Y67.997 E0.08561 ; perimeter
G1 X79.917 Y79.127 E0.71336 ; perimeter
G1 X83.754 Y79.127 E0.15807 ; perimeter
G1 X85.609 Y80.684 E0.09977 ; perimeter
G1 X78.933 Y88.641 E0.42789 ; perimeter
G1 X76.014 Y86.192 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.148 Y91.959 E0.15639 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.061 Y91.446 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X59.296 Y77.379 E0.90157 ; perimeter
G1 X61.265 Y75.032 E0.12620 ; perimeter
G1 X63.851 Y77.202 E0.13906 ; perimeter
G1 X64.705 Y76.185 E0.05471 ; perimeter
G1 X62.119 Y74.015 E0.13906 ; perimeter
G1 X65.020 Y70.557 E0.18596 ; perimeter
G1 X67.606 Y72.727 E0.13906 ; perimeter
G1 X68.460 Y71.709 E0.05471 ; perimeter
G1 X65.874 Y69.540 E0.13906 ; perimeter
G1 X66.700 Y68.555 E0.05296 ; perimeter
G1 X79.772 Y79.524 E0.70298 ; perimeter
G1 X83.610 Y79.524 E0.15807 ; perimeter
G1 X85.051 Y80.733 E0.07750 ; perimeter
G1 X78.884 Y88.082 E0.39523 ; perimeter
G1 X75.965 Y85.633 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X76.100 Y91.401 E0.12373 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.905 Y91.815 F10800.000 ; move inwards before travel
G1 F8640
G1 X73.572 Y89.292 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.100 F10800.000 ; lift Z
G1 X125.000 Y96.113 ; move to first perimeter point
G1 Z1.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.579 Y96.113 E1.87113 ; perimeter
G1 X57.641 Y77.704 E1.17979 ; perimeter
G1 X66.733 Y66.869 E0.58271 ; perimeter
G1 X80.250 Y78.211 E0.72691 ; perimeter
G1 X85.387 Y78.211 E0.21162 ; perimeter
G1 X94.103 Y85.524 E0.46869 ; perimeter
G1 X155.897 Y85.524 E2.54568 ; perimeter
G1 X164.613 Y78.211 E0.46869 ; perimeter
G1 X169.750 Y78.211 E0.21162 ; perimeter
G1 X183.267 Y66.869 E0.72691 ; perimeter
G1 X192.359 Y77.704 E0.58271 ; perimeter
G1 X170.420 Y96.113 E1.17979 ; perimeter
G1 X125.060 Y96.113 E1.86866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y96.509 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.435 Y96.509 E1.87707 ; perimeter
G1 X57.083 Y77.753 E1.20206 ; perimeter
G1 X66.684 Y66.310 E0.61536 ; perimeter
G1 X80.395 Y77.814 E0.73730 ; perimeter
G1 X85.532 Y77.814 E0.21162 ; perimeter
G1 X94.247 Y85.127 E0.46869 ; perimeter
G1 X155.753 Y85.127 E2.53379 ; perimeter
G1 X164.468 Y77.814 E0.46869 ; perimeter
G1 X169.605 Y77.814 E0.21162 ; perimeter
G1 X183.316 Y66.310 E0.73730 ; perimeter
G1 X192.917 Y77.753 E0.61536 ; perimeter
G1 X170.565 Y96.509 E1.20206 ; perimeter
G1 X125.060 Y96.509 E1.87460 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.770 Y96.182 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y96.509 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.100 F10800.000 ; lift Z
G1 X163.720 Y79.921 ; move to first infill point
G1 Z1.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7250.54
G1 X164.919 Y78.722 E0.08751 ; infill
G1 F8640
G1 X163.720 Y79.921 E-0.39155 ; wipe and retract
G1 E-0.40845 F2100.00000 ; retract
G1 Z2.100 F10800.000 ; lift Z
G1 X85.779 Y80.159 ; move to first infill point
G1 Z1.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7086
G1 X86.142 Y79.774 E0.02794 ; infill
G1 X85.764 Y79.456 E0.02607 ; infill
G1 X85.531 Y79.689 E0.01735 ; infill
G1 X85.141 Y79.361 E0.02693 ; infill
G1 X85.373 Y79.129 E0.01735 ; infill
G1 X85.128 Y78.923 E0.01689 ; infill
G1 X84.860 Y78.923 E0.01415 ; infill
G1 X84.607 Y79.176 E0.01887 ; infill
G1 F8640
G1 X84.860 Y78.923 E-0.08251 ; wipe and retract
G1 X85.128 Y78.923 E-0.06188 ; wipe and retract
G1 X85.373 Y79.129 E-0.07383 ; wipe and retract
G1 X85.141 Y79.361 E-0.07588 ; wipe and retract
G1 X85.531 Y79.689 E-0.11776 ; wipe and retract
G1 X85.764 Y79.456 E-0.07588 ; wipe and retract
G1 X86.142 Y79.774 E-0.11399 ; wipe and retract
G1 X85.779 Y80.159 E-0.12217 ; wipe and retract
G1 E-0.07609 F2100.00000 ; retract
G1 Z2.100 F10800.000 ; lift Z
G1 X124.715 Y133.342 ; move to first perimeter point
G1 Z1.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.628 Y133.342 E1.85739 ; perimeter
G1 X76.235 Y130.495 E0.18247 ; perimeter
G1 X86.271 Y118.534 E0.64322 ; perimeter
G1 X93.484 Y124.587 E0.38789 ; perimeter
G1 X155.946 Y124.587 E2.57316 ; perimeter
G1 X163.159 Y118.534 E0.38789 ; perimeter
G1 X173.195 Y130.495 E0.64322 ; perimeter
G1 X169.802 Y133.342 E0.18247 ; perimeter
G1 X124.775 Y133.342 E1.85492 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y132.946 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.772 Y132.946 E1.85145 ; perimeter
G1 X76.793 Y130.446 E0.16020 ; perimeter
G1 X86.320 Y119.093 E0.61056 ; perimeter
G1 X93.340 Y124.983 E0.37750 ; perimeter
G1 X156.090 Y124.983 E2.58505 ; perimeter
G1 X163.110 Y119.093 E0.37750 ; perimeter
G1 X172.636 Y130.446 E0.61056 ; perimeter
G1 X169.657 Y132.946 E0.16020 ; perimeter
G1 X124.775 Y132.946 E1.84897 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.521 Y133.296 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y132.946 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.100 F10800.000 ; lift Z
G1 X173.605 Y130.151 ; move to first perimeter point
G1 Z1.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X171.126 Y127.197 E0.15886 ; perimeter
G1 X174.045 Y124.748 E0.15696 ; perimeter
G1 X173.701 Y124.338 E0.02205 ; perimeter
G1 X170.782 Y126.787 E0.15696 ; perimeter
G1 X164.106 Y118.830 E0.42789 ; perimeter
G1 X165.961 Y117.273 E0.09977 ; perimeter
G1 X169.798 Y117.273 E0.15807 ; perimeter
G1 X183.063 Y106.143 E0.71336 ; perimeter
G1 X184.399 Y107.735 E0.08561 ; perimeter
G1 X181.813 Y109.904 E0.13906 ; perimeter
G1 X182.157 Y110.315 E0.02205 ; perimeter
G1 X184.743 Y108.145 E0.13906 ; perimeter
G1 X188.154 Y112.210 E0.21861 ; perimeter
G1 X185.568 Y114.380 E0.13906 ; perimeter
G1 X185.913 Y114.790 E0.02205 ; perimeter
G1 X188.498 Y112.620 E0.13906 ; perimeter
G1 X190.977 Y115.574 E0.15886 ; perimeter
G1 X173.651 Y130.112 E0.93175 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.654 Y129.593 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.685 Y127.246 E0.12620 ; perimeter
G1 X174.603 Y124.797 E0.15696 ; perimeter
G1 X173.750 Y123.779 E0.05471 ; perimeter
G1 X170.831 Y126.229 E0.15696 ; perimeter
G1 X164.664 Y118.879 E0.39523 ; perimeter
G1 X166.105 Y117.670 E0.07750 ; perimeter
G1 X169.942 Y117.670 E0.15807 ; perimeter
G1 X183.014 Y106.701 E0.70298 ; perimeter
G1 X183.841 Y107.686 E0.05296 ; perimeter
G1 X181.255 Y109.856 E0.13906 ; perimeter
G1 X182.109 Y110.873 E0.05471 ; perimeter
G1 X184.694 Y108.703 E0.13906 ; perimeter
G1 X187.596 Y112.161 E0.18596 ; perimeter
G1 X185.010 Y114.331 E0.13906 ; perimeter
G1 X185.864 Y115.348 E0.05471 ; perimeter
G1 X188.450 Y113.178 E0.13906 ; perimeter
G1 X190.419 Y115.525 E0.12620 ; perimeter
G1 X173.700 Y129.554 E0.89910 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.360 Y129.864 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.685 Y127.246 E-0.70751 ; wipe and retract
G1 X171.859 Y127.100 E-0.05249 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.100 F10800.000 ; lift Z
G1 X124.715 Y133.862 ; move to first perimeter point
G1 Z1.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.439 Y133.862 E1.86519 ; perimeter
G1 X57.914 Y115.801 E1.15752 ; perimeter
G1 X57.994 Y115.707 E0.00510 ; perimeter
G1 X79.484 Y133.739 E1.15566 ; perimeter
G1 X169.946 Y133.739 E3.72666 ; perimeter
G1 X191.436 Y115.707 E1.15566 ; perimeter
G1 X191.515 Y115.801 E0.00510 ; perimeter
G1 X169.991 Y133.862 E1.15752 ; perimeter
G1 X124.775 Y133.862 E1.86272 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y133.862 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.100 F10800.000 ; lift Z
G1 X124.715 Y124.190 ; move to first perimeter point
G1 Z1.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X93.628 Y124.190 E1.28064 ; perimeter
G1 X86.222 Y117.976 E0.39827 ; perimeter
G1 X85.685 Y118.616 E0.03442 ; perimeter
G1 X83.613 Y116.877 E0.11144 ; perimeter
G1 X79.776 Y116.877 E0.15807 ; perimeter
G1 X66.417 Y105.668 E0.71839 ; perimeter
G1 X66.497 Y105.573 E0.00510 ; perimeter
G1 X79.821 Y116.753 E0.71653 ; perimeter
M73 Q12 S121
G1 X84.958 Y116.753 E0.21162 ; perimeter
G1 X93.673 Y124.066 E0.46869 ; perimeter
G1 X155.756 Y124.066 E2.55756 ; perimeter
G1 X164.472 Y116.753 E0.46869 ; perimeter
G1 X169.609 Y116.753 E0.21162 ; perimeter
G1 X182.933 Y105.573 E0.71653 ; perimeter
G1 X183.012 Y105.668 E0.00510 ; perimeter
G1 X169.654 Y116.877 E0.71839 ; perimeter
G1 X165.817 Y116.877 E0.15807 ; perimeter
G1 X163.744 Y118.616 E0.11144 ; perimeter
G1 X163.207 Y117.976 E0.03442 ; perimeter
G1 X155.801 Y124.190 E0.39827 ; perimeter
G1 X124.775 Y124.190 E1.27817 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y124.190 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.100 F10800.000 ; lift Z
G1 X75.825 Y130.151 ; move to first perimeter point
G1 Z1.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 P12 R119
M204 S800 ; adjust acceleration
G1 F4800
G1 X58.453 Y115.574 E0.93423 ; perimeter
G1 X60.931 Y112.620 E0.15886 ; perimeter
G1 X63.517 Y114.790 E0.13906 ; perimeter
G1 X63.861 Y114.380 E0.02205 ; perimeter
G1 X61.275 Y112.210 E0.13906 ; perimeter
G1 X64.686 Y108.145 E0.21861 ; perimeter
G1 X67.272 Y110.315 E0.13906 ; perimeter
G1 X67.616 Y109.904 E0.02205 ; perimeter
G1 X65.031 Y107.735 E0.13906 ; perimeter
G1 X66.366 Y106.143 E0.08561 ; perimeter
G1 X79.632 Y117.273 E0.71336 ; perimeter
G1 X83.469 Y117.273 E0.15807 ; perimeter
G1 X85.324 Y118.830 E0.09977 ; perimeter
G1 X78.648 Y126.787 E0.42789 ; perimeter
G1 X75.729 Y124.338 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.863 Y130.105 E0.15639 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.776 Y129.593 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X59.011 Y115.525 E0.90157 ; perimeter
G1 X60.980 Y113.178 E0.12620 ; perimeter
G1 X63.566 Y115.348 E0.13906 ; perimeter
G1 X64.420 Y114.331 E0.05471 ; perimeter
G1 X61.834 Y112.161 E0.13906 ; perimeter
G1 X64.735 Y108.703 E0.18596 ; perimeter
G1 X67.321 Y110.873 E0.13906 ; perimeter
G1 X68.175 Y109.856 E0.05471 ; perimeter
G1 X65.589 Y107.686 E0.13906 ; perimeter
G1 X66.415 Y106.701 E0.05296 ; perimeter
G1 X79.487 Y117.670 E0.70298 ; perimeter
G1 X83.324 Y117.670 E0.15807 ; perimeter
G1 X84.766 Y118.879 E0.07750 ; perimeter
G1 X78.599 Y126.229 E0.39523 ; perimeter
G1 X75.680 Y123.779 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.814 Y129.547 E0.12373 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.620 Y129.961 F10800.000 ; move inwards before travel
G1 F8640
G1 X73.287 Y127.438 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.100 F10800.000 ; lift Z
G1 X124.715 Y134.259 ; move to first perimeter point
G1 Z1.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.294 Y134.259 E1.87113 ; perimeter
G1 X57.356 Y115.850 E1.17979 ; perimeter
G1 X66.448 Y105.015 E0.58271 ; perimeter
G1 X79.965 Y116.357 E0.72691 ; perimeter
G1 X85.102 Y116.357 E0.21162 ; perimeter
G1 X93.818 Y123.670 E0.46869 ; perimeter
G1 X155.612 Y123.670 E2.54568 ; perimeter
G1 X164.328 Y116.357 E0.46869 ; perimeter
G1 X169.465 Y116.357 E0.21162 ; perimeter
G1 X182.982 Y105.015 E0.72691 ; perimeter
G1 X192.074 Y115.850 E0.58271 ; perimeter
G1 X170.135 Y134.259 E1.17979 ; perimeter
G1 X124.775 Y134.259 E1.86866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y134.655 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.150 Y134.655 E1.87707 ; perimeter
G1 X56.797 Y115.899 E1.20206 ; perimeter
G1 X66.399 Y104.456 E0.61536 ; perimeter
G1 X80.109 Y115.961 E0.73730 ; perimeter
G1 X85.246 Y115.961 E0.21162 ; perimeter
G1 X93.962 Y123.274 E0.46869 ; perimeter
G1 X155.468 Y123.274 E2.53379 ; perimeter
G1 X164.183 Y115.961 E0.46869 ; perimeter
G1 X169.320 Y115.961 E0.21162 ; perimeter
G1 X183.031 Y104.456 E0.73730 ; perimeter
G1 X192.632 Y115.899 E0.61536 ; perimeter
G1 X170.280 Y134.655 E1.20206 ; perimeter
G1 X124.775 Y134.655 E1.87460 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.485 Y134.328 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y134.655 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.100 F10800.000 ; lift Z
G1 X163.435 Y118.067 ; move to first infill point
G1 Z1.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7250.54
G1 X164.634 Y116.868 E0.08751 ; infill
G1 F8640
G1 X163.435 Y118.067 E-0.39155 ; wipe and retract
G1 E-0.40845 F2100.00000 ; retract
G1 Z2.100 F10800.000 ; lift Z
G1 X85.494 Y118.305 ; move to first infill point
G1 Z1.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7086
G1 X85.857 Y117.920 E0.02794 ; infill
G1 X85.478 Y117.603 E0.02607 ; infill
G1 X85.246 Y117.835 E0.01735 ; infill
G1 X84.855 Y117.507 E0.02693 ; infill
G1 X85.088 Y117.275 E0.01735 ; infill
G1 X84.843 Y117.069 E0.01689 ; infill
G1 X84.575 Y117.069 E0.01415 ; infill
G1 X84.322 Y117.322 E0.01887 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;1.75


G1 F8640
G1 X84.575 Y117.069 E-0.08251 ; wipe and retract
G1 X84.843 Y117.069 E-0.06188 ; wipe and retract
G1 X85.088 Y117.275 E-0.07383 ; wipe and retract
G1 X84.855 Y117.507 E-0.07588 ; wipe and retract
G1 X85.246 Y117.835 E-0.11776 ; wipe and retract
G1 X85.478 Y117.603 E-0.07588 ; wipe and retract
G1 X85.857 Y117.920 E-0.11399 ; wipe and retract
G1 X85.494 Y118.305 E-0.12217 ; wipe and retract
G1 E-0.07609 F2100.00000 ; retract
G1 Z2.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;1.75
G1 X125.000 Y95.371 ; move to first perimeter point
G1 Z1.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.849 Y95.371 E1.86001 ; perimeter
G1 X76.407 Y92.483 E0.18510 ; perimeter
G1 X86.669 Y80.254 E0.65764 ; perimeter
G1 X93.833 Y86.265 E0.38526 ; perimeter
G1 X156.167 Y86.265 E2.56791 ; perimeter
G1 X163.331 Y80.254 E0.38526 ; perimeter
G1 X173.593 Y92.483 E0.65764 ; perimeter
G1 X170.151 Y95.371 E0.18510 ; perimeter
G1 X125.060 Y95.371 E1.85754 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y94.975 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.994 Y94.975 E1.85407 ; perimeter
G1 X76.966 Y92.434 E0.16283 ; perimeter
G1 X86.718 Y80.812 E0.62499 ; perimeter
G1 X93.689 Y86.662 E0.37488 ; perimeter
G1 X156.311 Y86.662 E2.57980 ; perimeter
G1 X163.282 Y80.812 E0.37488 ; perimeter
G1 X173.034 Y92.434 E0.62499 ; perimeter
G1 X170.006 Y94.975 E0.16283 ; perimeter
G1 X125.060 Y94.975 E1.85160 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.806 Y95.325 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y94.975 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.350 F10800.000 ; lift Z
G1 X174.003 Y92.139 ; move to first perimeter point
G1 Z1.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X171.411 Y89.051 E0.16607 ; perimeter
G1 X174.330 Y86.602 E0.15696 ; perimeter
G1 X173.986 Y86.192 E0.02205 ; perimeter
G1 X171.067 Y88.641 E0.15696 ; perimeter
G1 X164.391 Y80.684 E0.42789 ; perimeter
G1 X166.455 Y78.952 E0.11099 ; perimeter
G1 X170.020 Y78.952 E0.14686 ; perimeter
G1 X183.370 Y67.750 E0.71795 ; perimeter
G1 X184.818 Y69.476 E0.09282 ; perimeter
G1 X182.098 Y71.758 E0.14627 ; perimeter
G1 X182.443 Y72.168 E0.02205 ; perimeter
G1 X185.162 Y69.886 E0.14627 ; perimeter
G1 X188.574 Y73.951 E0.21861 ; perimeter
G1 X185.854 Y76.234 E0.14627 ; perimeter
G1 X186.198 Y76.644 E0.02205 ; perimeter
G1 X188.918 Y74.361 E0.14627 ; perimeter
G1 X191.509 Y77.449 E0.16607 ; perimeter
G1 X174.049 Y92.100 E0.93897 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.051 Y91.581 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.970 Y89.100 E0.13342 ; perimeter
G1 X174.888 Y86.651 E0.15696 ; perimeter
G1 X174.035 Y85.633 E0.05471 ; perimeter
G1 X171.116 Y88.082 E0.15696 ; perimeter
G1 X164.949 Y80.733 E0.39523 ; perimeter
G1 X166.599 Y79.349 E0.08872 ; perimeter
G1 X170.164 Y79.349 E0.14686 ; perimeter
G1 X183.321 Y68.308 E0.70756 ; perimeter
G1 X184.260 Y69.427 E0.06017 ; perimeter
G1 X181.540 Y71.709 E0.14627 ; perimeter
G1 X182.394 Y72.727 E0.05471 ; perimeter
G1 X185.114 Y70.444 E0.14627 ; perimeter
G1 X188.015 Y73.902 E0.18596 ; perimeter
G1 X185.295 Y76.185 E0.14627 ; perimeter
G1 X186.149 Y77.202 E0.05471 ; perimeter
G1 X188.869 Y74.920 E0.14627 ; perimeter
G1 X190.951 Y77.401 E0.13342 ; perimeter
G1 X174.097 Y91.542 E0.90631 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.758 Y91.852 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.970 Y89.100 E-0.74792 ; wipe and retract
G1 X172.010 Y89.066 E-0.01208 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.350 F10800.000 ; lift Z
G1 X125.000 Y95.891 ; move to first perimeter point
G1 Z1.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.660 Y95.891 E1.86781 ; perimeter
G1 X57.953 Y77.677 E1.16736 ; perimeter
G1 X58.032 Y77.582 E0.00510 ; perimeter
G1 X79.705 Y95.768 E1.16550 ; perimeter
G1 X170.295 Y95.768 E3.73191 ; perimeter
G1 X191.968 Y77.582 E1.16550 ; perimeter
G1 X192.047 Y77.677 E0.00510 ; perimeter
G1 X170.340 Y95.891 E1.16736 ; perimeter
G1 X125.060 Y95.891 E1.86534 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y95.891 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.350 F10800.000 ; lift Z
G1 X125.000 Y85.869 ; move to first perimeter point
G1 Z1.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X93.977 Y85.869 E1.27801 ; perimeter
G1 X86.620 Y79.696 E0.39565 ; perimeter
G1 X85.970 Y80.470 E0.04163 ; perimeter
G1 X83.690 Y78.556 E0.12266 ; perimeter
G1 X80.125 Y78.556 E0.14686 ; perimeter
G1 X66.681 Y67.275 E0.72297 ; perimeter
G1 X66.760 Y67.180 E0.00510 ; perimeter
G1 X80.170 Y78.432 E0.72112 ; perimeter
G1 X85.307 Y78.432 E0.21162 ; perimeter
G1 X94.022 Y85.745 E0.46869 ; perimeter
G1 X155.978 Y85.745 E2.55231 ; perimeter
G1 X164.693 Y78.432 E0.46869 ; perimeter
G1 X169.830 Y78.432 E0.21162 ; perimeter
G1 X183.240 Y67.180 E0.72112 ; perimeter
G1 X183.319 Y67.275 E0.00510 ; perimeter
G1 X169.875 Y78.556 E0.72297 ; perimeter
G1 X166.310 Y78.556 E0.14686 ; perimeter
G1 X164.030 Y80.470 E0.12266 ; perimeter
G1 X163.380 Y79.696 E0.04163 ; perimeter
G1 X156.023 Y85.869 E0.39565 ; perimeter
G1 X125.060 Y85.869 E1.27554 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y85.869 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.350 F10800.000 ; lift Z
G1 X75.997 Y92.139 ; move to first perimeter point
G1 Z1.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X58.491 Y77.449 E0.94144 ; perimeter
G1 X61.082 Y74.361 E0.16607 ; perimeter
G1 X63.802 Y76.644 E0.14627 ; perimeter
G1 X64.146 Y76.234 E0.02205 ; perimeter
G1 X61.426 Y73.951 E0.14627 ; perimeter
G1 X64.838 Y69.886 E0.21861 ; perimeter
G1 X67.557 Y72.168 E0.14627 ; perimeter
G1 X67.902 Y71.758 E0.02205 ; perimeter
G1 X65.182 Y69.476 E0.14627 ; perimeter
G1 X66.630 Y67.750 E0.09283 ; perimeter
G1 X79.980 Y78.952 E0.71795 ; perimeter
G1 X83.545 Y78.952 E0.14686 ; perimeter
G1 X85.609 Y80.684 E0.11099 ; perimeter
G1 X78.933 Y88.641 E0.42789 ; perimeter
G1 X76.014 Y86.192 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.036 Y92.093 E0.16360 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.949 Y91.581 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X59.049 Y77.401 E0.90878 ; perimeter
G1 X61.131 Y74.920 E0.13342 ; perimeter
G1 X63.851 Y77.202 E0.14627 ; perimeter
G1 X64.705 Y76.185 E0.05471 ; perimeter
G1 X61.985 Y73.902 E0.14627 ; perimeter
G1 X64.886 Y70.444 E0.18596 ; perimeter
G1 X67.606 Y72.727 E0.14627 ; perimeter
G1 X68.460 Y71.709 E0.05471 ; perimeter
G1 X65.740 Y69.427 E0.14627 ; perimeter
G1 X66.679 Y68.308 E0.06017 ; perimeter
G1 X79.836 Y79.349 E0.70756 ; perimeter
G1 X83.401 Y79.349 E0.14686 ; perimeter
G1 X85.051 Y80.733 E0.08872 ; perimeter
G1 X78.884 Y88.082 E0.39523 ; perimeter
G1 X75.965 Y85.633 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.987 Y91.535 E0.13094 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.789 Y91.948 F10800.000 ; move inwards before travel
G1 F8640
G1 X73.460 Y89.426 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.350 F10800.000 ; lift Z
G1 X125.000 Y96.288 ; move to first perimeter point
G1 Z1.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.516 Y96.288 E1.87376 ; perimeter
G1 X57.394 Y77.726 E1.18963 ; perimeter
G1 X66.712 Y66.622 E0.59713 ; perimeter
G1 X80.314 Y78.036 E0.73150 ; perimeter
G1 X85.451 Y78.036 E0.21162 ; perimeter
G1 X94.166 Y85.349 E0.46869 ; perimeter
G1 X155.834 Y85.349 E2.54043 ; perimeter
G1 X164.549 Y78.036 E0.46869 ; perimeter
G1 X169.686 Y78.036 E0.21162 ; perimeter
G1 X183.288 Y66.622 E0.73150 ; perimeter
G1 X192.606 Y77.726 E0.59713 ; perimeter
G1 X170.484 Y96.288 E1.18963 ; perimeter
G1 X125.060 Y96.288 E1.87128 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y96.684 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.372 Y96.684 E1.87970 ; perimeter
G1 X56.836 Y77.775 E1.21190 ; perimeter
G1 X66.663 Y66.064 E0.62979 ; perimeter
G1 X80.458 Y77.639 E0.74189 ; perimeter
G1 X85.595 Y77.639 E0.21162 ; perimeter
G1 X94.311 Y84.952 E0.46869 ; perimeter
M73 Q13 S120
G1 X155.689 Y84.952 E2.52854 ; perimeter
G1 X164.405 Y77.639 E0.46869 ; perimeter
G1 X169.542 Y77.639 E0.21162 ; perimeter
G1 X183.337 Y66.064 E0.74189 ; perimeter
G1 X193.164 Y77.775 E0.62979 ; perimeter
G1 X170.628 Y96.684 E1.21190 ; perimeter
G1 X125.060 Y96.684 E1.87723 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.770 Y96.357 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y96.684 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.350 F10800.000 ; lift Z
G1 X86.380 Y79.802 ; move to first infill point
G1 Z1.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F6721.2
G1 X85.125 Y78.547 E0.09882 ; infill
G1 X84.368 Y78.547 F10800.000 ; move to first infill point
G1 F6721.2
G1 X86.035 Y80.214 E0.13124 ; infill
G1 F8640
G1 X84.368 Y78.547 E-0.54435 ; wipe and retract
G1 E-0.25565 F2100.00000 ; retract
G1 Z2.350 F10800.000 ; lift Z
G1 X164.566 Y79.870 ; move to first infill point
G1 Z1.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 P13 R118
G1 F7682.69
G1 X164.067 Y79.370 E0.03438 ; infill
G1 X164.427 Y79.068 E0.02291 ; infill
G1 X164.783 Y79.425 E0.02456 ; infill
G1 X165.144 Y79.122 E0.02291 ; infill
G1 X164.787 Y78.766 E0.02456 ; infill
G1 X164.808 Y78.748 E0.00134 ; infill
G1 X165.432 Y78.748 E0.03039 ; infill
G1 X165.647 Y78.963 E0.01478 ; infill
G1 F8640
G1 X165.432 Y78.748 E-0.07006 ; wipe and retract
G1 X164.808 Y78.748 E-0.14406 ; wipe and retract
G1 X164.787 Y78.766 E-0.00636 ; wipe and retract
G1 X165.144 Y79.122 E-0.11646 ; wipe and retract
G1 X164.783 Y79.425 E-0.10861 ; wipe and retract
G1 X164.427 Y79.068 E-0.11646 ; wipe and retract
G1 X164.067 Y79.370 E-0.10861 ; wipe and retract
G1 X164.340 Y79.644 E-0.08939 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.350 F10800.000 ; lift Z
G1 X124.715 Y133.517 ; move to first perimeter point
G1 Z1.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.564 Y133.517 E1.86001 ; perimeter
G1 X76.122 Y130.629 E0.18510 ; perimeter
G1 X86.384 Y118.400 E0.65764 ; perimeter
G1 X93.548 Y124.411 E0.38526 ; perimeter
G1 X155.882 Y124.411 E2.56791 ; perimeter
G1 X163.046 Y118.400 E0.38526 ; perimeter
G1 X173.307 Y130.629 E0.65764 ; perimeter
G1 X169.865 Y133.517 E0.18510 ; perimeter
G1 X124.775 Y133.517 E1.85754 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y133.121 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.708 Y133.121 E1.85407 ; perimeter
G1 X76.681 Y130.580 E0.16283 ; perimeter
G1 X86.432 Y118.959 E0.62499 ; perimeter
G1 X93.403 Y124.808 E0.37488 ; perimeter
G1 X156.026 Y124.808 E2.57980 ; perimeter
G1 X162.997 Y118.959 E0.37488 ; perimeter
G1 X172.749 Y130.580 E0.62499 ; perimeter
G1 X169.721 Y133.121 E0.16283 ; perimeter
G1 X124.775 Y133.121 E1.85160 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.521 Y133.471 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y133.121 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.350 F10800.000 ; lift Z
G1 X173.717 Y130.285 ; move to first perimeter point
G1 Z1.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X171.126 Y127.197 E0.16607 ; perimeter
G1 X174.045 Y124.748 E0.15696 ; perimeter
G1 X173.701 Y124.338 E0.02205 ; perimeter
G1 X170.782 Y126.787 E0.15696 ; perimeter
G1 X164.106 Y118.830 E0.42789 ; perimeter
G1 X166.170 Y117.098 E0.11099 ; perimeter
G1 X169.734 Y117.098 E0.14686 ; perimeter
G1 X183.085 Y105.896 E0.71795 ; perimeter
G1 X184.533 Y107.622 E0.09282 ; perimeter
G1 X181.813 Y109.904 E0.14627 ; perimeter
G1 X182.157 Y110.315 E0.02205 ; perimeter
G1 X184.877 Y108.032 E0.14627 ; perimeter
G1 X188.288 Y112.097 E0.21861 ; perimeter
G1 X185.568 Y114.380 E0.14627 ; perimeter
G1 X185.913 Y114.790 E0.02205 ; perimeter
G1 X188.632 Y112.507 E0.14627 ; perimeter
G1 X191.224 Y115.596 E0.16607 ; perimeter
G1 X173.763 Y130.247 E0.93897 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.766 Y129.727 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.685 Y127.246 E0.13342 ; perimeter
G1 X174.603 Y124.797 E0.15696 ; perimeter
G1 X173.750 Y123.779 E0.05471 ; perimeter
G1 X170.831 Y126.229 E0.15696 ; perimeter
G1 X164.664 Y118.879 E0.39523 ; perimeter
G1 X166.314 Y117.495 E0.08872 ; perimeter
G1 X169.879 Y117.495 E0.14686 ; perimeter
G1 X183.036 Y106.454 E0.70756 ; perimeter
G1 X183.975 Y107.573 E0.06017 ; perimeter
G1 X181.255 Y109.856 E0.14627 ; perimeter
G1 X182.109 Y110.873 E0.05471 ; perimeter
G1 X184.828 Y108.591 E0.14627 ; perimeter
G1 X187.730 Y112.049 E0.18596 ; perimeter
G1 X185.010 Y114.331 E0.14627 ; perimeter
G1 X185.864 Y115.348 E0.05471 ; perimeter
G1 X188.584 Y113.066 E0.14627 ; perimeter
G1 X190.665 Y115.547 E0.13342 ; perimeter
G1 X173.812 Y129.688 E0.90631 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.473 Y129.998 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.685 Y127.246 E-0.74792 ; wipe and retract
G1 X171.725 Y127.212 E-0.01208 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.350 F10800.000 ; lift Z
G1 X124.715 Y134.038 ; move to first perimeter point
G1 Z1.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.375 Y134.038 E1.86781 ; perimeter
G1 X57.668 Y115.823 E1.16736 ; perimeter
G1 X57.747 Y115.728 E0.00510 ; perimeter
G1 X79.420 Y133.914 E1.16550 ; perimeter
G1 X170.010 Y133.914 E3.73191 ; perimeter
G1 X191.682 Y115.728 E1.16550 ; perimeter
G1 X191.762 Y115.823 E0.00510 ; perimeter
G1 X170.055 Y134.038 E1.16736 ; perimeter
G1 X124.775 Y134.038 E1.86534 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y134.038 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.350 F10800.000 ; lift Z
G1 X124.715 Y124.015 ; move to first perimeter point
G1 Z1.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X93.692 Y124.015 E1.27801 ; perimeter
G1 X86.335 Y117.842 E0.39565 ; perimeter
G1 X85.685 Y118.616 E0.04163 ; perimeter
G1 X83.404 Y116.702 E0.12266 ; perimeter
G1 X79.839 Y116.702 E0.14686 ; perimeter
G1 X66.396 Y105.421 E0.72297 ; perimeter
G1 X66.475 Y105.326 E0.00510 ; perimeter
G1 X79.885 Y116.578 E0.72112 ; perimeter
G1 X85.022 Y116.578 E0.21162 ; perimeter
G1 X93.737 Y123.891 E0.46869 ; perimeter
G1 X155.693 Y123.891 E2.55231 ; perimeter
G1 X164.408 Y116.578 E0.46869 ; perimeter
G1 X169.545 Y116.578 E0.21162 ; perimeter
G1 X182.954 Y105.326 E0.72112 ; perimeter
G1 X183.034 Y105.421 E0.00510 ; perimeter
G1 X169.590 Y116.702 E0.72297 ; perimeter
G1 X166.025 Y116.702 E0.14686 ; perimeter
G1 X163.744 Y118.616 E0.12266 ; perimeter
G1 X163.095 Y117.842 E0.04163 ; perimeter
G1 X155.738 Y124.015 E0.39565 ; perimeter
G1 X124.775 Y124.015 E1.27554 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y124.015 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.350 F10800.000 ; lift Z
G1 X75.712 Y130.285 ; move to first perimeter point
G1 Z1.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X58.206 Y115.596 E0.94144 ; perimeter
G1 X60.797 Y112.507 E0.16607 ; perimeter
G1 X63.517 Y114.790 E0.14627 ; perimeter
G1 X63.861 Y114.380 E0.02205 ; perimeter
G1 X61.141 Y112.097 E0.14627 ; perimeter
G1 X64.552 Y108.032 E0.21861 ; perimeter
G1 X67.272 Y110.315 E0.14627 ; perimeter
G1 X67.616 Y109.904 E0.02205 ; perimeter
G1 X64.896 Y107.622 E0.14627 ; perimeter
G1 X66.345 Y105.896 E0.09283 ; perimeter
G1 X79.695 Y117.098 E0.71795 ; perimeter
G1 X83.260 Y117.098 E0.14686 ; perimeter
G1 X85.324 Y118.830 E0.11099 ; perimeter
G1 X78.648 Y126.787 E0.42789 ; perimeter
G1 X75.729 Y124.338 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.751 Y130.239 E0.16360 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.663 Y129.727 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X58.764 Y115.547 E0.90878 ; perimeter
G1 X60.846 Y113.066 E0.13342 ; perimeter
G1 X63.566 Y115.348 E0.14627 ; perimeter
G1 X64.420 Y114.331 E0.05471 ; perimeter
G1 X61.700 Y112.049 E0.14627 ; perimeter
G1 X64.601 Y108.591 E0.18596 ; perimeter
G1 X67.321 Y110.873 E0.14627 ; perimeter
G1 X68.175 Y109.856 E0.05471 ; perimeter
G1 X65.455 Y107.573 E0.14627 ; perimeter
G1 X66.394 Y106.454 E0.06017 ; perimeter
G1 X79.551 Y117.495 E0.70756 ; perimeter
G1 X83.116 Y117.495 E0.14686 ; perimeter
G1 X84.766 Y118.879 E0.08872 ; perimeter
G1 X78.599 Y126.229 E0.39523 ; perimeter
G1 X75.680 Y123.779 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.702 Y129.681 E0.13094 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.504 Y130.094 F10800.000 ; move inwards before travel
G1 F8640
G1 X73.175 Y127.572 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.350 F10800.000 ; lift Z
G1 X124.715 Y134.434 ; move to first perimeter point
G1 Z1.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.231 Y134.434 E1.87376 ; perimeter
G1 X57.109 Y115.872 E1.18963 ; perimeter
G1 X66.426 Y104.768 E0.59713 ; perimeter
G1 X80.029 Y116.182 E0.73150 ; perimeter
G1 X85.166 Y116.182 E0.21162 ; perimeter
G1 X93.881 Y123.495 E0.46869 ; perimeter
G1 X155.548 Y123.495 E2.54043 ; perimeter
G1 X164.264 Y116.182 E0.46869 ; perimeter
G1 X169.401 Y116.182 E0.21162 ; perimeter
G1 X183.003 Y104.768 E0.73150 ; perimeter
G1 X192.320 Y115.872 E0.59713 ; perimeter
G1 X170.199 Y134.434 E1.18963 ; perimeter
G1 X124.775 Y134.434 E1.87128 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y134.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.086 Y134.830 E1.87970 ; perimeter
G1 X56.551 Y115.921 E1.21190 ; perimeter
G1 X66.378 Y104.210 E0.62979 ; perimeter
G1 X80.173 Y115.785 E0.74189 ; perimeter
G1 X85.310 Y115.785 E0.21162 ; perimeter
G1 X94.025 Y123.099 E0.46869 ; perimeter
G1 X155.404 Y123.099 E2.52854 ; perimeter
G1 X164.120 Y115.785 E0.46869 ; perimeter
G1 X169.257 Y115.785 E0.21162 ; perimeter
G1 X183.052 Y104.210 E0.74189 ; perimeter
G1 X192.879 Y115.921 E0.62979 ; perimeter
G1 X170.343 Y134.830 E1.21190 ; perimeter
G1 X124.775 Y134.830 E1.87723 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.484 Y134.503 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y134.830 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.350 F10800.000 ; lift Z
G1 X86.095 Y117.948 ; move to first infill point
G1 Z1.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F6721.2
G1 X84.840 Y116.693 E0.09882 ; infill
G1 X84.082 Y116.693 F10800.000 ; move to first infill point
G1 F6721.2
G1 X85.749 Y118.360 E0.13124 ; infill
G1 F8640
G1 X84.082 Y116.693 E-0.54435 ; wipe and retract
G1 E-0.25565 F2100.00000 ; retract
G1 Z2.350 F10800.000 ; lift Z
G1 X164.281 Y118.016 ; move to first infill point
G1 Z1.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7682.69
G1 X163.781 Y117.517 E0.03438 ; infill
G1 X164.142 Y117.214 E0.02291 ; infill
G1 X164.498 Y117.571 E0.02456 ; infill
G1 X164.859 Y117.269 E0.02291 ; infill
G1 X164.502 Y116.912 E0.02456 ; infill
G1 X164.523 Y116.894 E0.00134 ; infill
G1 X165.147 Y116.894 E0.03039 ; infill
G1 X165.362 Y117.109 E0.01478 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;2


G1 F8640
G1 X165.147 Y116.894 E-0.07006 ; wipe and retract
G1 X164.523 Y116.894 E-0.14406 ; wipe and retract
G1 X164.502 Y116.912 E-0.00636 ; wipe and retract
G1 X164.859 Y117.269 E-0.11646 ; wipe and retract
G1 X164.498 Y117.571 E-0.10861 ; wipe and retract
G1 X164.142 Y117.214 E-0.11646 ; wipe and retract
G1 X163.781 Y117.517 E-0.10861 ; wipe and retract
G1 X164.055 Y117.790 E-0.08939 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;2
G1 X125.000 Y95.546 ; move to first perimeter point
G1 Z2.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.786 Y95.546 E1.86264 ; perimeter
G1 X76.295 Y92.617 E0.18772 ; perimeter
G1 X86.781 Y80.120 E0.67207 ; perimeter
G1 X93.897 Y86.090 E0.38264 ; perimeter
G1 X156.103 Y86.090 E2.56266 ; perimeter
G1 X163.219 Y80.120 E0.38264 ; perimeter
G1 X173.705 Y92.617 E0.67207 ; perimeter
G1 X170.214 Y95.546 E0.18772 ; perimeter
G1 X125.060 Y95.546 E1.86017 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y95.150 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.930 Y95.150 E1.85669 ; perimeter
G1 X76.853 Y92.568 E0.16545 ; perimeter
G1 X86.830 Y80.678 E0.63941 ; perimeter
G1 X93.752 Y86.487 E0.37225 ; perimeter
G1 X156.248 Y86.487 E2.57455 ; perimeter
G1 X163.170 Y80.678 E0.37225 ; perimeter
G1 X173.147 Y92.568 E0.63941 ; perimeter
G1 X170.070 Y95.150 E0.16545 ; perimeter
G1 X125.060 Y95.150 E1.85422 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.806 Y95.500 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y95.150 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.600 F10800.000 ; lift Z
G1 X174.115 Y92.273 ; move to first perimeter point
G1 Z2.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X171.411 Y89.051 E0.17328 ; perimeter
G1 X174.330 Y86.602 E0.15696 ; perimeter
G1 X173.986 Y86.192 E0.02205 ; perimeter
G1 X171.067 Y88.641 E0.15696 ; perimeter
G1 X164.391 Y80.684 E0.42789 ; perimeter
G1 X166.663 Y78.777 E0.12221 ; perimeter
G1 X169.956 Y78.777 E0.13564 ; perimeter
G1 X183.392 Y67.503 E0.72254 ; perimeter
G1 X184.952 Y69.364 E0.10004 ; perimeter
G1 X182.112 Y71.747 E0.15277 ; perimeter
M73 Q13 S119
G1 X182.456 Y72.157 E0.02205 ; perimeter
G1 X185.297 Y69.774 E0.15277 ; perimeter
G1 X188.708 Y73.839 E0.21861 ; perimeter
G1 X185.867 Y76.222 E0.15277 ; perimeter
G1 X186.211 Y76.632 E0.02205 ; perimeter
G1 X189.052 Y74.249 E0.15277 ; perimeter
G1 X191.756 Y77.471 E0.17328 ; perimeter
G1 X174.161 Y92.234 E0.94618 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.164 Y91.715 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.970 Y89.100 E0.14063 ; perimeter
G1 X174.888 Y86.651 E0.15696 ; perimeter
G1 X174.035 Y85.633 E0.05471 ; perimeter
G1 X171.116 Y88.082 E0.15696 ; perimeter
G1 X164.949 Y80.733 E0.39523 ; perimeter
G1 X166.808 Y79.174 E0.09994 ; perimeter
G1 X170.100 Y79.174 E0.13564 ; perimeter
G1 X183.343 Y68.062 E0.71215 ; perimeter
G1 X184.394 Y69.315 E0.06738 ; perimeter
G1 X181.553 Y71.698 E0.15277 ; perimeter
G1 X182.407 Y72.716 E0.05471 ; perimeter
G1 X185.248 Y70.332 E0.15277 ; perimeter
G1 X188.149 Y73.790 E0.18596 ; perimeter
G1 X185.309 Y76.174 E0.15277 ; perimeter
G1 X186.162 Y77.191 E0.05471 ; perimeter
G1 X189.003 Y74.807 E0.15277 ; perimeter
G1 X191.197 Y77.422 E0.14063 ; perimeter
G1 X174.210 Y91.676 E0.91352 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.871 Y91.987 F10800.000 ; move inwards before travel
G1 F8640
G1 X172.050 Y89.192 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.600 F10800.000 ; lift Z
G1 X125.000 Y96.066 ; move to first perimeter point
G1 Z2.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.596 Y96.066 E1.87044 ; perimeter
G1 X57.706 Y77.698 E1.17719 ; perimeter
G1 X57.786 Y77.604 E0.00510 ; perimeter
G1 X79.641 Y95.943 E1.17534 ; perimeter
G1 X170.359 Y95.943 E3.73716 ; perimeter
M73 P14 R117
G1 X192.214 Y77.604 E1.17534 ; perimeter
G1 X192.294 Y77.698 E0.00510 ; perimeter
G1 X170.404 Y96.066 E1.17719 ; perimeter
G1 X125.060 Y96.066 E1.86797 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y96.066 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.600 F10800.000 ; lift Z
G1 X125.000 Y85.694 ; move to first perimeter point
G1 Z2.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.041 Y85.694 E1.27539 ; perimeter
G1 X86.732 Y79.562 E0.39302 ; perimeter
G1 X85.970 Y80.470 E0.04884 ; perimeter
G1 X83.481 Y78.381 E0.13388 ; perimeter
G1 X80.188 Y78.381 E0.13564 ; perimeter
G1 X66.659 Y67.029 E0.72756 ; perimeter
G1 X66.739 Y66.934 E0.00510 ; perimeter
G1 X80.233 Y78.257 E0.72570 ; perimeter
G1 X85.370 Y78.257 E0.21162 ; perimeter
G1 X94.086 Y85.570 E0.46869 ; perimeter
G1 X155.914 Y85.570 E2.54706 ; perimeter
G1 X164.630 Y78.257 E0.46869 ; perimeter
G1 X169.767 Y78.257 E0.21162 ; perimeter
G1 X183.261 Y66.934 E0.72570 ; perimeter
G1 X183.341 Y67.029 E0.00510 ; perimeter
G1 X169.812 Y78.381 E0.72756 ; perimeter
G1 X166.519 Y78.381 E0.13564 ; perimeter
G1 X164.030 Y80.470 E0.13388 ; perimeter
G1 X163.268 Y79.562 E0.04884 ; perimeter
G1 X155.959 Y85.694 E0.39302 ; perimeter
G1 X125.060 Y85.694 E1.27292 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y85.694 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.600 F10800.000 ; lift Z
G1 X75.885 Y92.273 ; move to first perimeter point
G1 Z2.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X58.244 Y77.471 E0.94865 ; perimeter
G1 X60.948 Y74.249 E0.17328 ; perimeter
G1 X63.789 Y76.632 E0.15277 ; perimeter
G1 X64.133 Y76.222 E0.02205 ; perimeter
G1 X61.292 Y73.839 E0.15277 ; perimeter
G1 X64.703 Y69.774 E0.21861 ; perimeter
G1 X67.544 Y72.157 E0.15277 ; perimeter
G1 X67.888 Y71.747 E0.02205 ; perimeter
G1 X65.048 Y69.364 E0.15277 ; perimeter
G1 X66.608 Y67.503 E0.10004 ; perimeter
G1 X80.044 Y78.777 E0.72254 ; perimeter
G1 X83.337 Y78.777 E0.13564 ; perimeter
G1 X85.609 Y80.684 E0.12221 ; perimeter
G1 X78.933 Y88.641 E0.42789 ; perimeter
G1 X76.014 Y86.192 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.923 Y92.227 E0.17081 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.836 Y91.715 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X58.803 Y77.422 E0.91599 ; perimeter
G1 X60.997 Y74.807 E0.14063 ; perimeter
G1 X63.838 Y77.191 E0.15277 ; perimeter
G1 X64.691 Y76.174 E0.05471 ; perimeter
G1 X61.851 Y73.790 E0.15277 ; perimeter
G1 X64.752 Y70.332 E0.18596 ; perimeter
G1 X67.593 Y72.716 E0.15277 ; perimeter
G1 X68.447 Y71.698 E0.05471 ; perimeter
G1 X65.606 Y69.315 E0.15277 ; perimeter
G1 X66.657 Y68.062 E0.06738 ; perimeter
G1 X79.900 Y79.174 E0.71215 ; perimeter
G1 X83.192 Y79.174 E0.13564 ; perimeter
G1 X85.051 Y80.733 E0.09994 ; perimeter
G1 X78.884 Y88.082 E0.39523 ; perimeter
G1 X75.965 Y85.633 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.875 Y91.669 E0.13815 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.674 Y92.080 F10800.000 ; move inwards before travel
G1 F8640
G1 X73.347 Y89.560 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.600 F10800.000 ; lift Z
G1 X125.000 Y96.463 ; move to first perimeter point
G1 Z2.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.452 Y96.463 E1.87638 ; perimeter
G1 X57.148 Y77.747 E1.19946 ; perimeter
G1 X66.690 Y66.375 E0.61155 ; perimeter
G1 X80.378 Y77.861 E0.73609 ; perimeter
G1 X85.515 Y77.861 E0.21162 ; perimeter
G1 X94.230 Y85.174 E0.46869 ; perimeter
G1 X155.770 Y85.174 E2.53518 ; perimeter
G1 X164.485 Y77.861 E0.46869 ; perimeter
G1 X169.622 Y77.861 E0.21162 ; perimeter
G1 X183.310 Y66.375 E0.73609 ; perimeter
G1 X192.852 Y77.747 E0.61155 ; perimeter
G1 X170.548 Y96.463 E1.19946 ; perimeter
G1 X125.060 Y96.463 E1.87391 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y96.859 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.308 Y96.859 E1.88232 ; perimeter
G1 X56.589 Y77.796 E1.22173 ; perimeter
G1 X66.641 Y65.817 E0.64421 ; perimeter
G1 X80.522 Y77.464 E0.74647 ; perimeter
G1 X85.659 Y77.464 E0.21162 ; perimeter
G1 X94.374 Y84.777 E0.46869 ; perimeter
G1 X155.626 Y84.777 E2.52329 ; perimeter
G1 X164.341 Y77.464 E0.46869 ; perimeter
G1 X169.478 Y77.464 E0.21162 ; perimeter
G1 X183.359 Y65.817 E0.74647 ; perimeter
G1 X193.411 Y77.796 E0.64421 ; perimeter
G1 X170.692 Y96.859 E1.22173 ; perimeter
G1 X125.060 Y96.859 E1.87985 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.769 Y96.532 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y96.859 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.600 F10800.000 ; lift Z
G1 X163.783 Y79.996 ; move to first infill point
G1 Z2.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7773.73
G1 X165.407 Y78.372 E0.11056 ; infill
G1 F8640
G1 X163.783 Y79.996 E-0.53038 ; wipe and retract
G1 E-0.26962 F2100.00000 ; retract
G1 Z2.600 F10800.000 ; lift Z
G1 X85.777 Y80.157 ; move to first infill point
G1 Z2.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7006.54
G1 X86.043 Y79.891 E0.02010 ; infill
G1 X86.367 Y79.506 E0.02688 ; infill
G1 X86.006 Y79.202 E0.02519 ; infill
G1 X85.525 Y79.683 E0.03632 ; infill
G1 X85.130 Y79.352 E0.02754 ; infill
G1 X85.610 Y78.871 E0.03632 ; infill
G1 X85.255 Y78.573 E0.02475 ; infill
G1 X85.182 Y78.573 E0.00394 ; infill
G1 X84.734 Y79.020 E0.03378 ; infill
G1 X84.339 Y78.689 E0.02754 ; infill
G1 X84.656 Y78.372 E0.02391 ; infill
G1 F8640
G1 X84.339 Y78.689 E-0.10337 ; wipe and retract
G1 X84.734 Y79.020 E-0.11909 ; wipe and retract
G1 X85.182 Y78.573 E-0.14604 ; wipe and retract
G1 X85.255 Y78.573 E-0.01704 ; wipe and retract
G1 X85.610 Y78.871 E-0.10699 ; wipe and retract
G1 X85.130 Y79.352 E-0.15704 ; wipe and retract
G1 X85.496 Y79.659 E-0.11043 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.600 F10800.000 ; lift Z
G1 X124.715 Y133.692 ; move to first perimeter point
G1 Z2.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.500 Y133.692 E1.86264 ; perimeter
G1 X76.010 Y130.763 E0.18772 ; perimeter
G1 X86.496 Y118.266 E0.67207 ; perimeter
G1 X93.611 Y124.236 E0.38264 ; perimeter
G1 X155.818 Y124.236 E2.56266 ; perimeter
G1 X162.934 Y118.266 E0.38264 ; perimeter
G1 X173.420 Y130.763 E0.67207 ; perimeter
G1 X169.929 Y133.692 E0.18772 ; perimeter
G1 X124.775 Y133.692 E1.86017 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y133.296 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.645 Y133.296 E1.85669 ; perimeter
G1 X76.568 Y130.714 E0.16545 ; perimeter
G1 X86.545 Y118.824 E0.63941 ; perimeter
G1 X93.467 Y124.633 E0.37225 ; perimeter
G1 X155.963 Y124.633 E2.57455 ; perimeter
G1 X162.885 Y118.824 E0.37225 ; perimeter
G1 X172.862 Y130.714 E0.63941 ; perimeter
G1 X169.785 Y133.296 E0.16545 ; perimeter
G1 X124.775 Y133.296 E1.85422 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.521 Y133.646 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y133.296 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.600 F10800.000 ; lift Z
G1 X173.830 Y130.419 ; move to first perimeter point
G1 Z2.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X171.126 Y127.197 E0.17328 ; perimeter
G1 X174.045 Y124.748 E0.15696 ; perimeter
G1 X173.701 Y124.338 E0.02205 ; perimeter
G1 X170.782 Y126.787 E0.15696 ; perimeter
G1 X164.106 Y118.830 E0.42789 ; perimeter
G1 X166.378 Y116.923 E0.12221 ; perimeter
G1 X169.671 Y116.923 E0.13564 ; perimeter
G1 X183.106 Y105.649 E0.72254 ; perimeter
G1 X184.667 Y107.510 E0.10004 ; perimeter
G1 X181.827 Y109.893 E0.15277 ; perimeter
G1 X182.171 Y110.303 E0.02205 ; perimeter
G1 X185.011 Y107.920 E0.15277 ; perimeter
G1 X188.422 Y111.985 E0.21861 ; perimeter
G1 X185.582 Y114.369 E0.15277 ; perimeter
G1 X185.926 Y114.779 E0.02205 ; perimeter
G1 X188.767 Y112.395 E0.15277 ; perimeter
G1 X191.470 Y115.617 E0.17328 ; perimeter
G1 X173.876 Y130.381 E0.94618 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.879 Y129.861 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.685 Y127.246 E0.14063 ; perimeter
G1 X174.603 Y124.797 E0.15696 ; perimeter
G1 X173.750 Y123.779 E0.05471 ; perimeter
G1 X170.831 Y126.229 E0.15696 ; perimeter
G1 X164.664 Y118.879 E0.39523 ; perimeter
G1 X166.522 Y117.320 E0.09994 ; perimeter
G1 X169.815 Y117.320 E0.13564 ; perimeter
G1 X183.058 Y106.208 E0.71215 ; perimeter
G1 X184.109 Y107.461 E0.06738 ; perimeter
G1 X181.268 Y109.844 E0.15277 ; perimeter
G1 X182.122 Y110.862 E0.05471 ; perimeter
G1 X184.963 Y108.478 E0.15277 ; perimeter
G1 X187.864 Y111.936 E0.18596 ; perimeter
G1 X185.023 Y114.320 E0.15277 ; perimeter
G1 X185.877 Y115.337 E0.05471 ; perimeter
G1 X188.718 Y112.953 E0.15277 ; perimeter
G1 X190.912 Y115.568 E0.14063 ; perimeter
G1 X173.925 Y129.822 E0.91352 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.586 Y130.133 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.765 Y127.338 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.600 F10800.000 ; lift Z
G1 X124.715 Y134.213 ; move to first perimeter point
G1 Z2.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.311 Y134.213 E1.87044 ; perimeter
G1 X57.421 Y115.845 E1.17719 ; perimeter
G1 X57.501 Y115.750 E0.00510 ; perimeter
G1 X79.356 Y134.089 E1.17534 ; perimeter
G1 X170.073 Y134.089 E3.73716 ; perimeter
G1 X191.929 Y115.750 E1.17534 ; perimeter
G1 X192.009 Y115.845 E0.00510 ; perimeter
G1 X170.118 Y134.213 E1.17719 ; perimeter
G1 X124.775 Y134.213 E1.86797 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y134.213 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.600 F10800.000 ; lift Z
G1 X124.715 Y123.840 ; move to first perimeter point
G1 Z2.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X93.756 Y123.840 E1.27539 ; perimeter
G1 X86.447 Y117.708 E0.39302 ; perimeter
G1 X85.685 Y118.616 E0.04884 ; perimeter
G1 X83.196 Y116.527 E0.13388 ; perimeter
G1 X79.903 Y116.527 E0.13564 ; perimeter
G1 X66.374 Y105.175 E0.72756 ; perimeter
G1 X66.454 Y105.080 E0.00510 ; perimeter
G1 X79.948 Y116.403 E0.72570 ; perimeter
G1 X85.085 Y116.403 E0.21162 ; perimeter
G1 X93.801 Y123.716 E0.46869 ; perimeter
G1 X155.629 Y123.716 E2.54706 ; perimeter
G1 X164.344 Y116.403 E0.46869 ; perimeter
G1 X169.481 Y116.403 E0.21162 ; perimeter
G1 X182.976 Y105.080 E0.72570 ; perimeter
G1 X183.056 Y105.175 E0.00510 ; perimeter
G1 X169.526 Y116.527 E0.72756 ; perimeter
G1 X166.234 Y116.527 E0.13564 ; perimeter
G1 X163.744 Y118.616 E0.13388 ; perimeter
G1 X162.982 Y117.708 E0.04884 ; perimeter
G1 X155.674 Y123.840 E0.39302 ; perimeter
G1 X124.775 Y123.840 E1.27292 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y123.840 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.600 F10800.000 ; lift Z
G1 X75.600 Y130.419 ; move to first perimeter point
G1 Z2.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.959 Y115.617 E0.94865 ; perimeter
G1 X60.663 Y112.395 E0.17328 ; perimeter
G1 X63.504 Y114.779 E0.15277 ; perimeter
G1 X63.848 Y114.369 E0.02205 ; perimeter
G1 X61.007 Y111.985 E0.15277 ; perimeter
G1 X64.418 Y107.920 E0.21861 ; perimeter
G1 X67.259 Y110.303 E0.15277 ; perimeter
G1 X67.603 Y109.893 E0.02205 ; perimeter
G1 X64.762 Y107.510 E0.15277 ; perimeter
G1 X66.323 Y105.649 E0.10004 ; perimeter
G1 X79.759 Y116.923 E0.72254 ; perimeter
M73 Q14 S118
G1 X83.051 Y116.923 E0.13564 ; perimeter
G1 X85.324 Y118.830 E0.12221 ; perimeter
G1 X78.648 Y126.787 E0.42789 ; perimeter
G1 X75.729 Y124.338 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.638 Y130.373 E0.17081 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.551 Y129.861 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X58.518 Y115.568 E0.91599 ; perimeter
G1 X60.712 Y112.953 E0.14063 ; perimeter
G1 X63.553 Y115.337 E0.15277 ; perimeter
G1 X64.406 Y114.320 E0.05471 ; perimeter
G1 X61.566 Y111.936 E0.15277 ; perimeter
G1 X64.467 Y108.478 E0.18596 ; perimeter
G1 X67.308 Y110.862 E0.15277 ; perimeter
G1 X68.161 Y109.844 E0.05471 ; perimeter
G1 X65.321 Y107.461 E0.15277 ; perimeter
G1 X66.372 Y106.208 E0.06738 ; perimeter
G1 X79.615 Y117.320 E0.71215 ; perimeter
G1 X82.907 Y117.320 E0.13564 ; perimeter
G1 X84.766 Y118.879 E0.09994 ; perimeter
G1 X78.599 Y126.229 E0.39523 ; perimeter
G1 X75.680 Y123.779 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.589 Y129.815 E0.13815 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.388 Y130.226 F10800.000 ; move inwards before travel
G1 F8640
G1 X73.062 Y127.706 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.600 F10800.000 ; lift Z
G1 X124.715 Y134.609 ; move to first perimeter point
G1 Z2.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.167 Y134.609 E1.87638 ; perimeter
G1 X56.863 Y115.893 E1.19946 ; perimeter
G1 X66.405 Y104.521 E0.61155 ; perimeter
G1 X80.093 Y116.007 E0.73609 ; perimeter
G1 X85.230 Y116.007 E0.21162 ; perimeter
G1 X93.945 Y123.320 E0.46869 ; perimeter
G1 X155.485 Y123.320 E2.53518 ; perimeter
G1 X164.200 Y116.007 E0.46869 ; perimeter
G1 X169.337 Y116.007 E0.21162 ; perimeter
G1 X183.025 Y104.521 E0.73609 ; perimeter
G1 X192.567 Y115.893 E0.61155 ; perimeter
G1 X170.263 Y134.609 E1.19946 ; perimeter
M73 P14 R116
G1 X124.775 Y134.609 E1.87391 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y135.005 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.023 Y135.005 E1.88232 ; perimeter
G1 X56.304 Y115.942 E1.22173 ; perimeter
G1 X66.356 Y103.963 E0.64421 ; perimeter
G1 X80.237 Y115.610 E0.74647 ; perimeter
G1 X85.374 Y115.610 E0.21162 ; perimeter
G1 X94.089 Y122.924 E0.46869 ; perimeter
G1 X155.340 Y122.924 E2.52329 ; perimeter
G1 X164.056 Y115.610 E0.46869 ; perimeter
G1 X169.193 Y115.610 E0.21162 ; perimeter
G1 X183.074 Y103.963 E0.74647 ; perimeter
G1 X193.125 Y115.942 E0.64421 ; perimeter
G1 X170.407 Y135.005 E1.22173 ; perimeter
G1 X124.775 Y135.005 E1.87985 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.484 Y134.678 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y135.005 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.600 F10800.000 ; lift Z
G1 X163.498 Y118.143 ; move to first infill point
G1 Z2.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7773.73
G1 X165.122 Y116.518 E0.11056 ; infill
G1 F8640
G1 X163.498 Y118.143 E-0.53038 ; wipe and retract
G1 E-0.26962 F2100.00000 ; retract
G1 Z2.600 F10800.000 ; lift Z
G1 X85.492 Y118.304 ; move to first infill point
G1 Z2.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7006.54
G1 X85.758 Y118.037 E0.02010 ; infill
G1 X86.082 Y117.652 E0.02688 ; infill
G1 X85.720 Y117.349 E0.02519 ; infill
G1 X85.239 Y117.829 E0.03632 ; infill
G1 X84.844 Y117.498 E0.02754 ; infill
G1 X85.325 Y117.017 E0.03632 ; infill
G1 X84.970 Y116.719 E0.02475 ; infill
G1 X84.896 Y116.719 E0.00394 ; infill
G1 X84.449 Y117.166 E0.03378 ; infill
G1 X84.054 Y116.835 E0.02754 ; infill
G1 X84.371 Y116.518 E0.02391 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;2.25


G1 F8640
G1 X84.054 Y116.835 E-0.10337 ; wipe and retract
G1 X84.449 Y117.166 E-0.11909 ; wipe and retract
G1 X84.896 Y116.719 E-0.14604 ; wipe and retract
G1 X84.970 Y116.719 E-0.01704 ; wipe and retract
G1 X85.325 Y117.017 E-0.10699 ; wipe and retract
G1 X84.844 Y117.498 E-0.15704 ; wipe and retract
G1 X85.211 Y117.805 E-0.11043 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;2.25
G1 X125.000 Y95.721 ; move to first perimeter point
G1 Z2.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.722 Y95.721 E1.86526 ; perimeter
G1 X76.182 Y92.751 E0.19035 ; perimeter
G1 X86.894 Y79.986 E0.68649 ; perimeter
G1 X93.960 Y85.915 E0.38001 ; perimeter
G1 X156.040 Y85.915 E2.55741 ; perimeter
G1 X163.106 Y79.986 E0.38001 ; perimeter
G1 X173.818 Y92.751 E0.68649 ; perimeter
G1 X170.278 Y95.721 E0.19035 ; perimeter
G1 X125.060 Y95.721 E1.86279 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y95.325 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.866 Y95.325 E1.85932 ; perimeter
G1 X76.741 Y92.702 E0.16808 ; perimeter
G1 X86.943 Y80.544 E0.65383 ; perimeter
G1 X93.816 Y86.312 E0.36963 ; perimeter
G1 X156.184 Y86.312 E2.56930 ; perimeter
G1 X163.057 Y80.544 E0.36963 ; perimeter
G1 X173.259 Y92.702 E0.65383 ; perimeter
G1 X170.134 Y95.325 E0.16808 ; perimeter
G1 X125.060 Y95.325 E1.85685 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.806 Y95.675 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y95.325 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.850 F10800.000 ; lift Z
G1 X174.228 Y92.407 ; move to first perimeter point
G1 Z2.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X171.411 Y89.051 E0.18049 ; perimeter
G1 X174.330 Y86.602 E0.15696 ; perimeter
G1 X173.986 Y86.192 E0.02205 ; perimeter
G1 X171.067 Y88.641 E0.15696 ; perimeter
G1 X164.391 Y80.684 E0.42789 ; perimeter
G1 X166.872 Y78.602 E0.13343 ; perimeter
G1 X169.892 Y78.602 E0.12442 ; perimeter
G1 X183.413 Y67.257 E0.72712 ; perimeter
G1 X185.087 Y69.251 E0.10725 ; perimeter
G1 X182.251 Y71.630 E0.15249 ; perimeter
G1 X182.595 Y72.040 E0.02205 ; perimeter
G1 X185.431 Y69.661 E0.15249 ; perimeter
G1 X188.842 Y73.726 E0.21861 ; perimeter
G1 X186.006 Y76.106 E0.15249 ; perimeter
G1 X186.350 Y76.516 E0.02205 ; perimeter
G1 X189.186 Y74.136 E0.15249 ; perimeter
G1 X192.002 Y77.493 E0.18049 ; perimeter
G1 X174.274 Y92.369 E0.95339 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.277 Y91.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.970 Y89.100 E0.14784 ; perimeter
G1 X174.888 Y86.651 E0.15696 ; perimeter
G1 X174.035 Y85.633 E0.05471 ; perimeter
G1 X171.116 Y88.082 E0.15696 ; perimeter
G1 X164.949 Y80.733 E0.39523 ; perimeter
G1 X167.016 Y78.999 E0.11116 ; perimeter
G1 X170.036 Y78.999 E0.12442 ; perimeter
G1 X183.364 Y67.815 E0.71674 ; perimeter
G1 X184.528 Y69.202 E0.07459 ; perimeter
G1 X181.693 Y71.582 E0.15249 ; perimeter
G1 X182.546 Y72.599 E0.05471 ; perimeter
G1 X185.382 Y70.219 E0.15249 ; perimeter
G1 X188.283 Y73.677 E0.18596 ; perimeter
G1 X185.448 Y76.057 E0.15249 ; perimeter
G1 X186.301 Y77.074 E0.05471 ; perimeter
G1 X189.137 Y74.695 E0.15249 ; perimeter
G1 X191.444 Y77.444 E0.14784 ; perimeter
G1 X174.322 Y91.810 E0.92073 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.984 Y92.122 F10800.000 ; move inwards before travel
G1 F8640
G1 X172.165 Y89.325 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.850 F10800.000 ; lift Z
G1 X125.000 Y96.242 ; move to first perimeter point
G1 Z2.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.533 Y96.242 E1.87306 ; perimeter
G1 X57.460 Y77.720 E1.18703 ; perimeter
G1 X57.539 Y77.625 E0.00510 ; perimeter
G1 X79.578 Y96.118 E1.18517 ; perimeter
G1 X87.223 Y96.118 E0.31493 ; perimeter
G1 X170.422 Y96.118 E3.42748 ; perimeter
G1 X192.461 Y77.625 E1.18517 ; perimeter
G1 X192.540 Y77.720 E0.00510 ; perimeter
G1 X170.467 Y96.242 E1.18703 ; perimeter
G1 X125.060 Y96.242 E1.87059 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y96.242 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.850 F10800.000 ; lift Z
G1 X125.000 Y85.519 ; move to first perimeter point
G1 Z2.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.104 Y85.519 E1.27276 ; perimeter
G1 X86.845 Y79.427 E0.39040 ; perimeter
G1 X85.970 Y80.470 E0.05605 ; perimeter
G1 X83.272 Y78.206 E0.14510 ; perimeter
G1 X80.252 Y78.206 E0.12442 ; perimeter
G1 X66.638 Y66.782 E0.73215 ; perimeter
G1 X66.717 Y66.687 E0.00510 ; perimeter
G1 X80.297 Y78.082 E0.73029 ; perimeter
G1 X85.434 Y78.082 E0.21162 ; perimeter
G1 X94.150 Y85.395 E0.46869 ; perimeter
G1 X155.850 Y85.395 E2.54181 ; perimeter
G1 X164.566 Y78.082 E0.46869 ; perimeter
G1 X169.703 Y78.082 E0.21162 ; perimeter
G1 X183.283 Y66.687 E0.73029 ; perimeter
G1 X183.362 Y66.782 E0.00510 ; perimeter
G1 X169.748 Y78.206 E0.73215 ; perimeter
G1 X166.728 Y78.206 E0.12442 ; perimeter
G1 X164.030 Y80.470 E0.14510 ; perimeter
G1 X163.155 Y79.427 E0.05605 ; perimeter
G1 X155.896 Y85.519 E0.39040 ; perimeter
G1 X125.060 Y85.519 E1.27029 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y85.519 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.850 F10800.000 ; lift Z
G1 X75.772 Y92.407 ; move to first perimeter point
G1 Z2.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.998 Y77.493 E0.95586 ; perimeter
G1 X60.814 Y74.136 E0.18049 ; perimeter
G1 X63.650 Y76.516 E0.15249 ; perimeter
G1 X63.994 Y76.106 E0.02205 ; perimeter
G1 X61.158 Y73.726 E0.15249 ; perimeter
G1 X64.569 Y69.661 E0.21861 ; perimeter
G1 X67.405 Y72.040 E0.15249 ; perimeter
G1 X67.749 Y71.630 E0.02205 ; perimeter
G1 X64.913 Y69.251 E0.15249 ; perimeter
G1 X66.587 Y67.257 E0.10725 ; perimeter
G1 X80.108 Y78.602 E0.72712 ; perimeter
G1 X83.128 Y78.602 E0.12442 ; perimeter
G1 X85.609 Y80.684 E0.13343 ; perimeter
G1 X78.933 Y88.641 E0.42789 ; perimeter
G1 X76.014 Y86.192 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.811 Y92.361 E0.17802 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.723 Y91.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X58.556 Y77.444 E0.92321 ; perimeter
G1 X60.863 Y74.695 E0.14784 ; perimeter
G1 X63.699 Y77.074 E0.15249 ; perimeter
G1 X64.552 Y76.057 E0.05471 ; perimeter
G1 X61.717 Y73.677 E0.15249 ; perimeter
G1 X64.618 Y70.219 E0.18596 ; perimeter
G1 X67.454 Y72.599 E0.15249 ; perimeter
G1 X68.307 Y71.582 E0.05471 ; perimeter
G1 X65.472 Y69.202 E0.15249 ; perimeter
G1 X66.636 Y67.815 E0.07459 ; perimeter
G1 X79.964 Y78.999 E0.71674 ; perimeter
G1 X82.984 Y78.999 E0.12442 ; perimeter
G1 X85.051 Y80.733 E0.11116 ; perimeter
G1 X78.884 Y88.082 E0.39523 ; perimeter
G1 X75.965 Y85.633 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.762 Y91.803 E0.14537 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.558 Y92.213 F10800.000 ; move inwards before travel
G1 F8640
G1 X73.235 Y89.694 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.850 F10800.000 ; lift Z
G1 X125.000 Y96.638 ; move to first perimeter point
G1 Z2.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.388 Y96.638 E1.87901 ; perimeter
G1 X56.901 Y77.769 E1.20930 ; perimeter
G1 X66.668 Y66.129 E0.62598 ; perimeter
G1 X80.441 Y77.686 E0.74067 ; perimeter
G1 X85.578 Y77.686 E0.21162 ; perimeter
G1 X94.294 Y84.999 E0.46869 ; perimeter
G1 X155.706 Y84.999 E2.52993 ; perimeter
G1 X164.422 Y77.686 E0.46869 ; perimeter
G1 X169.559 Y77.686 E0.21162 ; perimeter
G1 X183.332 Y66.129 E0.74067 ; perimeter
G1 X193.099 Y77.769 E0.62598 ; perimeter
G1 X170.612 Y96.638 E1.20930 ; perimeter
G1 X125.060 Y96.638 E1.87653 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y97.034 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.244 Y97.034 E1.88495 ; perimeter
G1 X56.343 Y77.818 E1.23157 ; perimeter
G1 X66.620 Y65.570 E0.65863 ; perimeter
G1 X80.586 Y77.289 E0.75106 ; perimeter
G1 X85.723 Y77.289 E0.21162 ; perimeter
G1 X94.438 Y84.602 E0.46869 ; perimeter
G1 X155.562 Y84.602 E2.51804 ; perimeter
G1 X164.277 Y77.289 E0.46869 ; perimeter
G1 X169.414 Y77.289 E0.21162 ; perimeter
G1 X183.380 Y65.570 E0.75106 ; perimeter
G1 X193.657 Y77.818 E0.65863 ; perimeter
G1 X170.756 Y97.034 E1.23157 ; perimeter
G1 X125.060 Y97.034 E1.88248 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.769 Y96.707 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y97.034 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.850 F10800.000 ; lift Z
G1 X86.607 Y79.532 ; move to first infill point
G1 Z2.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F6803.47
G1 X85.273 Y78.197 E0.10380 ; infill
G1 X84.524 Y78.197 F10800.000 ; move to first infill point
G1 F6803.47
G1 X86.266 Y79.939 E0.13545 ; infill
G1 F8640
G1 X84.524 Y78.197 E-0.56866 ; wipe and retract
G1 E-0.23134 F2100.00000 ; retract
M73 Q15 S117
G1 Z2.850 F10800.000 ; lift Z
G1 X163.688 Y78.969 ; move to first infill point
G1 Z2.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7513.1
G1 X164.435 Y79.717 E0.05266 ; infill
G1 X164.804 Y79.408 E0.02396 ; infill
G1 X164.199 Y78.803 E0.04262 ; infill
G1 X164.567 Y78.493 E0.02395 ; infill
G1 X165.172 Y79.099 E0.04262 ; infill
G1 X165.541 Y78.789 E0.02395 ; infill
G1 X165.149 Y78.398 E0.02757 ; infill
G1 X165.827 Y78.398 E0.03375 ; infill
G1 X166.052 Y78.623 E0.01583 ; infill
G1 F8640
G1 X165.827 Y78.398 E-0.07340 ; wipe and retract
G1 X165.149 Y78.398 E-0.15647 ; wipe and retract
G1 X165.541 Y78.789 E-0.12781 ; wipe and retract
G1 X165.172 Y79.099 E-0.11106 ; wipe and retract
G1 X164.567 Y78.493 E-0.19761 ; wipe and retract
G1 X164.256 Y78.754 E-0.09364 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.850 F10800.000 ; lift Z
G1 X124.715 Y133.867 ; move to first perimeter point
G1 Z2.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.437 Y133.867 E1.86526 ; perimeter
G1 X75.897 Y130.897 E0.19035 ; perimeter
G1 X86.609 Y118.132 E0.68649 ; perimeter
G1 X93.675 Y124.061 E0.38001 ; perimeter
G1 X155.755 Y124.061 E2.55741 ; perimeter
G1 X162.821 Y118.132 E0.38001 ; perimeter
G1 X173.532 Y130.897 E0.68649 ; perimeter
G1 X169.993 Y133.867 E0.19035 ; perimeter
G1 X124.775 Y133.867 E1.86279 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y133.471 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.581 Y133.471 E1.85932 ; perimeter
G1 X76.456 Y130.849 E0.16808 ; perimeter
G1 X86.658 Y118.690 E0.65383 ; perimeter
G1 X93.531 Y124.458 E0.36963 ; perimeter
G1 X155.899 Y124.458 E2.56930 ; perimeter
G1 X162.772 Y118.690 E0.36963 ; perimeter
G1 X172.974 Y130.849 E0.65383 ; perimeter
G1 X169.849 Y133.471 E0.16808 ; perimeter
G1 X124.775 Y133.471 E1.85685 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.521 Y133.821 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y133.471 E-0.76000 ; wipe and retract
M73 P15 R115
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.850 F10800.000 ; lift Z
G1 X173.942 Y130.553 ; move to first perimeter point
G1 Z2.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X171.126 Y127.197 E0.18049 ; perimeter
G1 X174.045 Y124.748 E0.15696 ; perimeter
G1 X173.701 Y124.338 E0.02205 ; perimeter
G1 X170.782 Y126.787 E0.15696 ; perimeter
G1 X164.106 Y118.830 E0.42789 ; perimeter
G1 X166.587 Y116.748 E0.13343 ; perimeter
G1 X169.607 Y116.748 E0.12442 ; perimeter
G1 X183.128 Y105.403 E0.72712 ; perimeter
G1 X184.801 Y107.397 E0.10725 ; perimeter
G1 X181.966 Y109.777 E0.15249 ; perimeter
G1 X182.310 Y110.187 E0.02205 ; perimeter
G1 X185.145 Y107.807 E0.15249 ; perimeter
G1 X188.557 Y111.872 E0.21861 ; perimeter
G1 X185.721 Y114.252 E0.15249 ; perimeter
G1 X186.065 Y114.662 E0.02205 ; perimeter
G1 X188.901 Y112.282 E0.15249 ; perimeter
G1 X191.717 Y115.639 E0.18049 ; perimeter
G1 X173.988 Y130.515 E0.95339 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.991 Y129.995 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.685 Y127.246 E0.14784 ; perimeter
G1 X174.603 Y124.797 E0.15696 ; perimeter
G1 X173.750 Y123.779 E0.05471 ; perimeter
G1 X170.831 Y126.229 E0.15696 ; perimeter
G1 X164.664 Y118.879 E0.39523 ; perimeter
G1 X166.731 Y117.145 E0.11116 ; perimeter
G1 X169.751 Y117.145 E0.12442 ; perimeter
G1 X183.079 Y105.961 E0.71674 ; perimeter
G1 X184.243 Y107.348 E0.07459 ; perimeter
G1 X181.407 Y109.728 E0.15249 ; perimeter
G1 X182.261 Y110.745 E0.05471 ; perimeter
G1 X185.097 Y108.366 E0.15249 ; perimeter
G1 X187.998 Y111.824 E0.18596 ; perimeter
G1 X185.163 Y114.203 E0.15249 ; perimeter
G1 X186.016 Y115.220 E0.05471 ; perimeter
G1 X188.852 Y112.841 E0.15249 ; perimeter
G1 X191.159 Y115.590 E0.14784 ; perimeter
G1 X174.037 Y129.956 E0.92073 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.699 Y130.268 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.880 Y127.471 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.850 F10800.000 ; lift Z
G1 X124.715 Y134.388 ; move to first perimeter point
G1 Z2.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.247 Y134.388 E1.87306 ; perimeter
G1 X57.174 Y115.866 E1.18703 ; perimeter
G1 X57.254 Y115.771 E0.00510 ; perimeter
G1 X79.293 Y134.264 E1.18517 ; perimeter
G1 X86.937 Y134.264 E0.31493 ; perimeter
G1 X170.137 Y134.264 E3.42748 ; perimeter
G1 X192.176 Y115.771 E1.18517 ; perimeter
G1 X192.255 Y115.866 E0.00510 ; perimeter
G1 X170.182 Y134.388 E1.18703 ; perimeter
G1 X124.775 Y134.388 E1.87059 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y134.388 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.850 F10800.000 ; lift Z
G1 X124.715 Y123.665 ; move to first perimeter point
G1 Z2.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X93.819 Y123.665 E1.27276 ; perimeter
G1 X86.560 Y117.574 E0.39040 ; perimeter
G1 X85.685 Y118.616 E0.05605 ; perimeter
G1 X82.987 Y116.352 E0.14510 ; perimeter
G1 X79.967 Y116.352 E0.12442 ; perimeter
G1 X66.352 Y104.928 E0.73215 ; perimeter
G1 X66.432 Y104.833 E0.00510 ; perimeter
G1 X80.012 Y116.228 E0.73029 ; perimeter
G1 X85.149 Y116.228 E0.21162 ; perimeter
G1 X93.864 Y123.541 E0.46869 ; perimeter
G1 X155.565 Y123.541 E2.54181 ; perimeter
G1 X164.281 Y116.228 E0.46869 ; perimeter
G1 X169.418 Y116.228 E0.21162 ; perimeter
G1 X182.998 Y104.833 E0.73029 ; perimeter
G1 X183.077 Y104.928 E0.00510 ; perimeter
G1 X169.463 Y116.352 E0.73215 ; perimeter
G1 X166.443 Y116.352 E0.12442 ; perimeter
G1 X163.744 Y118.616 E0.14510 ; perimeter
G1 X162.870 Y117.574 E0.05605 ; perimeter
G1 X155.610 Y123.665 E0.39040 ; perimeter
G1 X124.775 Y123.665 E1.27029 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y123.665 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.850 F10800.000 ; lift Z
G1 X75.487 Y130.553 ; move to first perimeter point
G1 Z2.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.713 Y115.639 E0.95586 ; perimeter
G1 X60.529 Y112.282 E0.18049 ; perimeter
G1 X63.365 Y114.662 E0.15249 ; perimeter
G1 X63.709 Y114.252 E0.02205 ; perimeter
G1 X60.873 Y111.872 E0.15249 ; perimeter
G1 X64.284 Y107.807 E0.21861 ; perimeter
G1 X67.120 Y110.187 E0.15249 ; perimeter
G1 X67.464 Y109.777 E0.02205 ; perimeter
G1 X64.628 Y107.397 E0.15249 ; perimeter
G1 X66.302 Y105.403 E0.10725 ; perimeter
G1 X79.823 Y116.748 E0.72712 ; perimeter
G1 X82.843 Y116.748 E0.12442 ; perimeter
G1 X85.324 Y118.830 E0.13343 ; perimeter
G1 X78.648 Y126.787 E0.42789 ; perimeter
G1 X75.729 Y124.338 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.526 Y130.507 E0.17802 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.438 Y129.995 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X58.271 Y115.590 E0.92321 ; perimeter
G1 X60.578 Y112.841 E0.14784 ; perimeter
G1 X63.413 Y115.220 E0.15249 ; perimeter
G1 X64.267 Y114.203 E0.05471 ; perimeter
G1 X61.431 Y111.824 E0.15249 ; perimeter
G1 X64.333 Y108.366 E0.18596 ; perimeter
G1 X67.169 Y110.745 E0.15249 ; perimeter
G1 X68.022 Y109.728 E0.05471 ; perimeter
G1 X65.187 Y107.348 E0.15249 ; perimeter
G1 X66.350 Y105.961 E0.07459 ; perimeter
G1 X79.678 Y117.145 E0.71674 ; perimeter
G1 X82.699 Y117.145 E0.12442 ; perimeter
G1 X84.766 Y118.879 E0.11116 ; perimeter
G1 X78.599 Y126.229 E0.39523 ; perimeter
G1 X75.680 Y123.779 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.477 Y129.949 E0.14537 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.273 Y130.359 F10800.000 ; move inwards before travel
G1 F8640
G1 X72.950 Y127.840 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.850 F10800.000 ; lift Z
G1 X124.715 Y134.784 ; move to first perimeter point
G1 Z2.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.103 Y134.784 E1.87901 ; perimeter
G1 X56.616 Y115.915 E1.20930 ; perimeter
G1 X66.383 Y104.275 E0.62598 ; perimeter
G1 X80.156 Y115.832 E0.74067 ; perimeter
G1 X85.293 Y115.832 E0.21162 ; perimeter
G1 X94.009 Y123.145 E0.46869 ; perimeter
G1 X155.421 Y123.145 E2.52993 ; perimeter
G1 X164.136 Y115.832 E0.46869 ; perimeter
G1 X169.273 Y115.832 E0.21162 ; perimeter
G1 X183.046 Y104.275 E0.74067 ; perimeter
G1 X192.814 Y115.915 E0.62598 ; perimeter
G1 X170.326 Y134.784 E1.20930 ; perimeter
G1 X124.775 Y134.784 E1.87653 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y135.180 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.959 Y135.180 E1.88495 ; perimeter
G1 X56.058 Y115.964 E1.23157 ; perimeter
G1 X66.334 Y103.716 E0.65863 ; perimeter
G1 X80.301 Y115.435 E0.75106 ; perimeter
G1 X85.438 Y115.435 E0.21162 ; perimeter
G1 X94.153 Y122.748 E0.46869 ; perimeter
G1 X155.277 Y122.748 E2.51804 ; perimeter
G1 X163.992 Y115.435 E0.46869 ; perimeter
G1 X169.129 Y115.435 E0.21162 ; perimeter
G1 X183.095 Y103.716 E0.75106 ; perimeter
G1 X193.372 Y115.964 E0.65863 ; perimeter
G1 X170.471 Y135.180 E1.23157 ; perimeter
G1 X124.775 Y135.180 E1.88248 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.484 Y134.854 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y135.180 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.850 F10800.000 ; lift Z
G1 X86.322 Y117.678 ; move to first infill point
G1 Z2.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F6803.47
G1 X84.988 Y116.343 E0.10380 ; infill
G1 X84.239 Y116.343 F10800.000 ; move to first infill point
G1 F6803.47
G1 X85.981 Y118.085 E0.13545 ; infill
G1 F8640
G1 X84.239 Y116.343 E-0.56866 ; wipe and retract
G1 E-0.23134 F2100.00000 ; retract
G1 Z2.850 F10800.000 ; lift Z
G1 X163.402 Y117.115 ; move to first infill point
G1 Z2.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7513.1
G1 X164.150 Y117.863 E0.05266 ; infill
G1 X164.519 Y117.554 E0.02396 ; infill
G1 X163.913 Y116.949 E0.04262 ; infill
G1 X164.282 Y116.639 E0.02395 ; infill
G1 X164.887 Y117.245 E0.04262 ; infill
G1 X165.256 Y116.935 E0.02395 ; infill
G1 X164.864 Y116.544 E0.02757 ; infill
G1 X165.542 Y116.544 E0.03375 ; infill
G1 X165.767 Y116.769 E0.01583 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;2.5


G1 F8640
G1 X165.542 Y116.544 E-0.07340 ; wipe and retract
G1 X164.864 Y116.544 E-0.15647 ; wipe and retract
G1 X165.256 Y116.935 E-0.12781 ; wipe and retract
G1 X164.887 Y117.245 E-0.11106 ; wipe and retract
G1 X164.282 Y116.639 E-0.19761 ; wipe and retract
G1 X163.971 Y116.900 E-0.09364 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z2.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;2.5
G1 X125.000 Y95.896 ; move to first perimeter point
G1 Z2.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.658 Y95.896 E1.86789 ; perimeter
G1 X76.070 Y92.885 E0.19297 ; perimeter
G1 X87.006 Y79.852 E0.70091 ; perimeter
G1 X94.024 Y85.740 E0.37739 ; perimeter
G1 X155.976 Y85.740 E2.55216 ; perimeter
G1 X162.994 Y79.852 E0.37739 ; perimeter
G1 X173.930 Y92.885 E0.70091 ; perimeter
G1 X170.342 Y95.896 E0.19297 ; perimeter
G1 X125.060 Y95.896 E1.86542 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y95.500 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.803 Y95.500 E1.86194 ; perimeter
G1 X76.628 Y92.836 E0.17070 ; perimeter
G1 X87.055 Y80.410 E0.66825 ; perimeter
G1 X93.880 Y86.137 E0.36700 ; perimeter
G1 X156.120 Y86.137 E2.56405 ; perimeter
G1 X162.945 Y80.410 E0.36700 ; perimeter
G1 X173.372 Y92.836 E0.66825 ; perimeter
G1 X170.197 Y95.500 E0.17070 ; perimeter
G1 X125.060 Y95.500 E1.85947 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.806 Y95.850 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y95.500 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.100 F10800.000 ; lift Z
G1 X174.340 Y92.541 ; move to first perimeter point
G1 Z2.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X171.411 Y89.051 E0.18771 ; perimeter
G1 X174.330 Y86.602 E0.15696 ; perimeter
G1 X173.986 Y86.192 E0.02205 ; perimeter
G1 X171.067 Y88.641 E0.15696 ; perimeter
G1 X164.391 Y80.684 E0.42789 ; perimeter
G1 X167.081 Y78.427 E0.14465 ; perimeter
G1 X169.828 Y78.427 E0.11320 ; perimeter
G1 X183.435 Y67.010 E0.73171 ; perimeter
G1 X185.221 Y69.138 E0.11446 ; perimeter
G1 X182.390 Y71.514 E0.15222 ; perimeter
G1 X182.734 Y71.924 E0.02205 ; perimeter
G1 X185.565 Y69.549 E0.15222 ; perimeter
G1 X188.976 Y73.614 E0.21861 ; perimeter
G1 X186.145 Y75.989 E0.15222 ; perimeter
G1 X186.489 Y76.399 E0.02205 ; perimeter
G1 X189.320 Y74.024 E0.15222 ; perimeter
G1 X192.249 Y77.514 E0.18771 ; perimeter
G1 X174.386 Y92.503 E0.96060 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.389 Y91.983 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.970 Y89.100 E0.15505 ; perimeter
G1 X174.888 Y86.651 E0.15696 ; perimeter
G1 X174.035 Y85.633 E0.05471 ; perimeter
G1 X171.116 Y88.082 E0.15696 ; perimeter
G1 X164.949 Y80.733 E0.39523 ; perimeter
G1 X167.225 Y78.823 E0.12238 ; perimeter
G1 X169.973 Y78.823 E0.11320 ; perimeter
G1 X183.386 Y67.568 E0.72132 ; perimeter
G1 X184.662 Y69.090 E0.08180 ; perimeter
G1 X181.832 Y71.465 E0.15222 ; perimeter
G1 X182.685 Y72.482 E0.05471 ; perimeter
G1 X185.516 Y70.107 E0.15222 ; perimeter
G1 X188.417 Y73.565 E0.18596 ; perimeter
G1 X185.587 Y75.940 E0.15222 ; perimeter
G1 X186.440 Y76.957 E0.05471 ; perimeter
G1 X189.271 Y74.582 E0.15222 ; perimeter
G1 X191.690 Y77.465 E0.15505 ; perimeter
G1 X174.435 Y91.944 E0.92794 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.097 Y92.256 F10800.000 ; move inwards before travel
G1 F8640
G1 X172.279 Y89.457 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.100 F10800.000 ; lift Z
G1 X125.000 Y96.417 ; move to first perimeter point
G1 Z2.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q16 S116
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.469 Y96.417 E1.87569 ; perimeter
G1 X57.213 Y77.742 E1.19687 ; perimeter
G1 X57.293 Y77.647 E0.00510 ; perimeter
G1 X79.514 Y96.293 E1.19501 ; perimeter
G1 X89.286 Y96.293 E0.40256 ; perimeter
G1 X170.486 Y96.293 E3.34510 ; perimeter
G1 X192.707 Y77.647 E1.19501 ; perimeter
G1 X192.787 Y77.742 E0.00510 ; perimeter
G1 X170.531 Y96.417 E1.19686 ; perimeter
G1 X125.060 Y96.417 E1.87322 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y96.417 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.100 F10800.000 ; lift Z
G1 X125.000 Y85.344 ; move to first perimeter point
G1 Z2.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.168 Y85.344 E1.27014 ; perimeter
G1 X86.957 Y79.293 E0.38777 ; perimeter
G1 X85.970 Y80.470 E0.06327 ; perimeter
G1 X83.064 Y78.031 E0.15631 ; perimeter
G1 X80.316 Y78.031 E0.11320 ; perimeter
G1 X66.616 Y66.535 E0.73673 ; perimeter
G1 X66.696 Y66.440 E0.00510 ; perimeter
G1 X80.361 Y77.907 E0.73488 ; perimeter
G1 X85.498 Y77.907 E0.21162 ; perimeter
G1 X94.213 Y85.220 E0.46869 ; perimeter
G1 X155.787 Y85.220 E2.53656 ; perimeter
G1 X164.502 Y77.907 E0.46869 ; perimeter
G1 X169.639 Y77.907 E0.21162 ; perimeter
G1 X183.304 Y66.440 E0.73488 ; perimeter
G1 X183.384 Y66.535 E0.00510 ; perimeter
G1 X169.684 Y78.031 E0.73673 ; perimeter
G1 X166.936 Y78.031 E0.11320 ; perimeter
G1 X164.030 Y80.470 E0.15631 ; perimeter
G1 X163.043 Y79.293 E0.06327 ; perimeter
G1 X155.832 Y85.344 E0.38777 ; perimeter
G1 X125.060 Y85.344 E1.26767 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y85.344 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.100 F10800.000 ; lift Z
G1 X75.660 Y92.541 ; move to first perimeter point
G1 Z2.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.751 Y77.514 E0.96307 ; perimeter
G1 X60.680 Y74.024 E0.18771 ; perimeter
M73 P16 R114
G1 X63.511 Y76.399 E0.15222 ; perimeter
G1 X63.855 Y75.989 E0.02205 ; perimeter
G1 X61.024 Y73.614 E0.15222 ; perimeter
G1 X64.435 Y69.549 E0.21861 ; perimeter
G1 X67.266 Y71.924 E0.15222 ; perimeter
G1 X67.610 Y71.514 E0.02205 ; perimeter
G1 X64.779 Y69.138 E0.15222 ; perimeter
G1 X66.565 Y67.010 E0.11446 ; perimeter
G1 X80.172 Y78.427 E0.73171 ; perimeter
G1 X82.919 Y78.427 E0.11320 ; perimeter
G1 X85.609 Y80.684 E0.14465 ; perimeter
G1 X78.933 Y88.641 E0.42789 ; perimeter
G1 X76.014 Y86.192 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.698 Y92.495 E0.18523 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.611 Y91.983 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X58.310 Y77.465 E0.93042 ; perimeter
G1 X60.729 Y74.582 E0.15505 ; perimeter
G1 X63.560 Y76.957 E0.15222 ; perimeter
G1 X64.413 Y75.940 E0.05471 ; perimeter
G1 X61.583 Y73.565 E0.15222 ; perimeter
G1 X64.484 Y70.107 E0.18596 ; perimeter
G1 X67.315 Y72.482 E0.15222 ; perimeter
G1 X68.168 Y71.465 E0.05471 ; perimeter
G1 X65.338 Y69.090 E0.15222 ; perimeter
G1 X66.614 Y67.568 E0.08180 ; perimeter
G1 X80.027 Y78.823 E0.72132 ; perimeter
G1 X82.775 Y78.823 E0.11320 ; perimeter
G1 X85.051 Y80.733 E0.12238 ; perimeter
G1 X78.884 Y88.082 E0.39523 ; perimeter
G1 X75.965 Y85.633 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.650 Y91.937 E0.15258 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.443 Y92.346 F10800.000 ; move inwards before travel
G1 F8640
G1 X73.123 Y89.828 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.100 F10800.000 ; lift Z
G1 X125.000 Y96.813 ; move to first perimeter point
G1 Z2.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.325 Y96.813 E1.88163 ; perimeter
G1 X56.655 Y77.790 E1.21914 ; perimeter
G1 X66.647 Y65.882 E0.64040 ; perimeter
G1 X80.505 Y77.511 E0.74526 ; perimeter
G1 X85.642 Y77.511 E0.21162 ; perimeter
G1 X94.358 Y84.824 E0.46869 ; perimeter
G1 X155.642 Y84.824 E2.52468 ; perimeter
G1 X164.358 Y77.511 E0.46869 ; perimeter
G1 X169.495 Y77.511 E0.21162 ; perimeter
G1 X183.353 Y65.882 E0.74526 ; perimeter
G1 X193.345 Y77.790 E0.64040 ; perimeter
G1 X170.675 Y96.813 E1.21914 ; perimeter
G1 X125.060 Y96.813 E1.87916 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y97.209 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.180 Y97.209 E1.88757 ; perimeter
G1 X56.096 Y77.839 E1.24141 ; perimeter
G1 X66.598 Y65.324 E0.67306 ; perimeter
G1 X80.649 Y77.114 E0.75565 ; perimeter
G1 X85.786 Y77.114 E0.21162 ; perimeter
G1 X94.502 Y84.427 E0.46869 ; perimeter
G1 X155.498 Y84.427 E2.51279 ; perimeter
G1 X164.214 Y77.114 E0.46869 ; perimeter
G1 X169.351 Y77.114 E0.21162 ; perimeter
G1 X183.402 Y65.324 E0.75565 ; perimeter
G1 X193.904 Y77.839 E0.67306 ; perimeter
G1 X170.820 Y97.209 E1.24141 ; perimeter
G1 X125.060 Y97.209 E1.88510 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.769 Y96.883 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y97.209 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.100 F10800.000 ; lift Z
G1 X163.541 Y79.709 ; move to first infill point
G1 Z2.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8064.81
G1 X165.028 Y78.223 E0.09750 ; infill
G1 X165.659 Y78.223 E0.02929 ; infill
G1 X163.830 Y80.052 E0.12003 ; infill
G1 F8640
G1 X165.659 Y78.223 E-0.59734 ; wipe and retract
G1 X165.028 Y78.223 E-0.14576 ; wipe and retract
G1 X164.976 Y78.275 E-0.01690 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.100 F10800.000 ; lift Z
G1 X85.452 Y79.885 ; move to first infill point
G1 Z2.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7943.9
G1 X86.324 Y79.013 E0.05808 ; infill
G1 X85.975 Y78.720 E0.02143 ; infill
G1 X85.246 Y79.450 E0.04859 ; infill
G1 X84.898 Y79.157 E0.02143 ; infill
G1 X85.627 Y78.428 E0.04859 ; infill
G1 X85.383 Y78.223 E0.01501 ; infill
G1 X85.191 Y78.223 E0.00904 ; infill
G1 X84.549 Y78.865 E0.04275 ; infill
G1 X84.201 Y78.572 E0.02143 ; infill
G1 X84.550 Y78.223 E0.02328 ; infill
G1 X83.909 Y78.223 E0.03019 ; infill
G1 X83.710 Y78.422 E0.01329 ; infill
G1 F8640
G1 X83.909 Y78.223 E-0.06517 ; wipe and retract
G1 X84.550 Y78.223 E-0.14799 ; wipe and retract
G1 X84.201 Y78.572 E-0.11410 ; wipe and retract
G1 X84.549 Y78.865 E-0.10504 ; wipe and retract
G1 X85.191 Y78.223 E-0.20959 ; wipe and retract
G1 X85.383 Y78.223 E-0.04432 ; wipe and retract
G1 X85.627 Y78.428 E-0.07358 ; wipe and retract
G1 X85.626 Y78.428 E-0.00022 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.100 F10800.000 ; lift Z
G1 X124.715 Y134.042 ; move to first perimeter point
G1 Z2.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.373 Y134.042 E1.86789 ; perimeter
G1 X75.785 Y131.031 E0.19297 ; perimeter
G1 X86.721 Y117.998 E0.70091 ; perimeter
G1 X93.739 Y123.886 E0.37739 ; perimeter
G1 X155.691 Y123.886 E2.55216 ; perimeter
G1 X162.708 Y117.998 E0.37739 ; perimeter
G1 X173.645 Y131.031 E0.70091 ; perimeter
G1 X170.057 Y134.042 E0.19297 ; perimeter
G1 X124.775 Y134.042 E1.86542 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y133.646 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.517 Y133.646 E1.86194 ; perimeter
G1 X76.343 Y130.983 E0.17070 ; perimeter
G1 X86.770 Y118.556 E0.66825 ; perimeter
G1 X93.594 Y124.283 E0.36700 ; perimeter
G1 X155.835 Y124.283 E2.56405 ; perimeter
G1 X162.660 Y118.556 E0.36700 ; perimeter
G1 X173.087 Y130.983 E0.66825 ; perimeter
G1 X169.912 Y133.646 E0.17070 ; perimeter
G1 X124.775 Y133.646 E1.85947 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.521 Y133.996 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y133.646 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.100 F10800.000 ; lift Z
G1 X174.055 Y130.687 ; move to first perimeter point
G1 Z2.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X171.126 Y127.197 E0.18771 ; perimeter
G1 X174.045 Y124.748 E0.15696 ; perimeter
G1 X173.701 Y124.338 E0.02205 ; perimeter
G1 X170.782 Y126.787 E0.15696 ; perimeter
G1 X164.106 Y118.830 E0.42789 ; perimeter
G1 X166.795 Y116.573 E0.14465 ; perimeter
G1 X169.543 Y116.573 E0.11320 ; perimeter
G1 X183.150 Y105.156 E0.73171 ; perimeter
G1 X184.936 Y107.285 E0.11446 ; perimeter
G1 X182.105 Y109.660 E0.15222 ; perimeter
G1 X182.449 Y110.070 E0.02205 ; perimeter
G1 X185.280 Y107.695 E0.15222 ; perimeter
G1 X188.691 Y111.760 E0.21861 ; perimeter
G1 X185.860 Y114.135 E0.15222 ; perimeter
G1 X186.204 Y114.545 E0.02205 ; perimeter
G1 X189.035 Y112.170 E0.15222 ; perimeter
G1 X191.964 Y115.660 E0.18771 ; perimeter
G1 X174.101 Y130.649 E0.96060 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.104 Y130.129 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.685 Y127.246 E0.15505 ; perimeter
G1 X174.603 Y124.797 E0.15696 ; perimeter
G1 X173.750 Y123.779 E0.05471 ; perimeter
G1 X170.831 Y126.229 E0.15696 ; perimeter
G1 X164.664 Y118.879 E0.39523 ; perimeter
G1 X166.940 Y116.970 E0.12238 ; perimeter
G1 X169.688 Y116.970 E0.11320 ; perimeter
G1 X183.101 Y105.715 E0.72132 ; perimeter
G1 X184.377 Y107.236 E0.08180 ; perimeter
G1 X181.546 Y109.611 E0.15222 ; perimeter
G1 X182.400 Y110.628 E0.05471 ; perimeter
G1 X185.231 Y108.253 E0.15222 ; perimeter
G1 X188.132 Y111.711 E0.18596 ; perimeter
G1 X185.302 Y114.086 E0.15222 ; perimeter
G1 X186.155 Y115.103 E0.05471 ; perimeter
G1 X188.986 Y112.728 E0.15222 ; perimeter
G1 X191.405 Y115.611 E0.15505 ; perimeter
G1 X174.150 Y130.090 E0.92794 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.812 Y130.403 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.994 Y127.603 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.100 F10800.000 ; lift Z
G1 X124.715 Y134.563 ; move to first perimeter point
G1 Z2.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.184 Y134.563 E1.87569 ; perimeter
G1 X56.928 Y115.888 E1.19687 ; perimeter
G1 X57.007 Y115.793 E0.00510 ; perimeter
G1 X79.229 Y134.439 E1.19501 ; perimeter
G1 X89.001 Y134.439 E0.40256 ; perimeter
G1 X170.201 Y134.439 E3.34510 ; perimeter
G1 X192.422 Y115.793 E1.19501 ; perimeter
G1 X192.502 Y115.888 E0.00510 ; perimeter
G1 X170.246 Y134.563 E1.19686 ; perimeter
G1 X124.775 Y134.563 E1.87322 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y134.563 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.100 F10800.000 ; lift Z
G1 X124.715 Y123.490 ; move to first perimeter point
G1 Z2.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X93.883 Y123.490 E1.27014 ; perimeter
G1 X86.672 Y117.439 E0.38777 ; perimeter
G1 X85.685 Y118.616 E0.06327 ; perimeter
G1 X82.778 Y116.177 E0.15631 ; perimeter
G1 X80.031 Y116.177 E0.11320 ; perimeter
G1 X66.331 Y104.681 E0.73673 ; perimeter
G1 X66.411 Y104.587 E0.00510 ; perimeter
G1 X80.076 Y116.053 E0.73488 ; perimeter
G1 X85.213 Y116.053 E0.21162 ; perimeter
G1 X93.928 Y123.366 E0.46869 ; perimeter
G1 X155.502 Y123.366 E2.53656 ; perimeter
G1 X164.217 Y116.053 E0.46869 ; perimeter
G1 X169.354 Y116.053 E0.21162 ; perimeter
G1 X183.019 Y104.587 E0.73488 ; perimeter
G1 X183.099 Y104.681 E0.00510 ; perimeter
G1 X169.399 Y116.177 E0.73673 ; perimeter
G1 X166.651 Y116.177 E0.11320 ; perimeter
G1 X163.744 Y118.616 E0.15631 ; perimeter
G1 X162.757 Y117.439 E0.06327 ; perimeter
G1 X155.547 Y123.490 E0.38777 ; perimeter
G1 X124.775 Y123.490 E1.26767 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y123.490 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.100 F10800.000 ; lift Z
G1 X75.375 Y130.687 ; move to first perimeter point
G1 Z2.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.466 Y115.660 E0.96307 ; perimeter
G1 X60.395 Y112.170 E0.18771 ; perimeter
G1 X63.226 Y114.545 E0.15222 ; perimeter
G1 X63.570 Y114.135 E0.02205 ; perimeter
G1 X60.739 Y111.760 E0.15222 ; perimeter
G1 X64.150 Y107.695 E0.21861 ; perimeter
G1 X66.981 Y110.070 E0.15222 ; perimeter
G1 X67.325 Y109.660 E0.02205 ; perimeter
G1 X64.494 Y107.285 E0.15222 ; perimeter
G1 X66.280 Y105.156 E0.11446 ; perimeter
G1 X79.886 Y116.573 E0.73171 ; perimeter
G1 X82.634 Y116.573 E0.11320 ; perimeter
G1 X85.324 Y118.830 E0.14465 ; perimeter
G1 X78.648 Y126.787 E0.42789 ; perimeter
G1 X75.729 Y124.338 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.413 Y130.641 E0.18523 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.326 Y130.129 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X58.024 Y115.611 E0.93042 ; perimeter
G1 X60.444 Y112.728 E0.15505 ; perimeter
G1 X63.274 Y115.103 E0.15222 ; perimeter
G1 X64.128 Y114.086 E0.05471 ; perimeter
G1 X61.297 Y111.711 E0.15222 ; perimeter
G1 X64.199 Y108.253 E0.18596 ; perimeter
G1 X67.030 Y110.628 E0.15222 ; perimeter
G1 X67.883 Y109.611 E0.05471 ; perimeter
G1 X65.053 Y107.236 E0.15222 ; perimeter
G1 X66.329 Y105.715 E0.08180 ; perimeter
G1 X79.742 Y116.970 E0.72132 ; perimeter
G1 X82.490 Y116.970 E0.11320 ; perimeter
G1 X84.766 Y118.879 E0.12238 ; perimeter
G1 X78.599 Y126.229 E0.39523 ; perimeter
G1 X75.680 Y123.779 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.364 Y130.083 E0.15258 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.157 Y130.492 F10800.000 ; move inwards before travel
G1 F8640
G1 X72.837 Y127.974 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.100 F10800.000 ; lift Z
G1 X124.715 Y134.959 ; move to first perimeter point
G1 Z2.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q16 S115
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.039 Y134.959 E1.88163 ; perimeter
G1 X56.369 Y115.937 E1.21914 ; perimeter
G1 X66.362 Y104.028 E0.64040 ; perimeter
G1 X80.220 Y115.657 E0.74526 ; perimeter
G1 X85.357 Y115.657 E0.21162 ; perimeter
G1 X94.072 Y122.970 E0.46869 ; perimeter
G1 X155.357 Y122.970 E2.52468 ; perimeter
G1 X164.073 Y115.657 E0.46869 ; perimeter
G1 X169.210 Y115.657 E0.21162 ; perimeter
G1 X183.068 Y104.028 E0.74526 ; perimeter
G1 X193.060 Y115.937 E0.64040 ; perimeter
G1 X170.390 Y134.959 E1.21914 ; perimeter
G1 X124.775 Y134.959 E1.87916 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y135.355 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.895 Y135.355 E1.88757 ; perimeter
G1 X55.811 Y115.985 E1.24141 ; perimeter
G1 X66.313 Y103.470 E0.67306 ; perimeter
G1 X80.364 Y115.260 E0.75565 ; perimeter
G1 X85.501 Y115.260 E0.21162 ; perimeter
G1 X94.217 Y122.573 E0.46869 ; perimeter
G1 X155.213 Y122.573 E2.51279 ; perimeter
G1 X163.928 Y115.260 E0.46869 ; perimeter
G1 X169.065 Y115.260 E0.21162 ; perimeter
G1 X183.117 Y103.470 E0.75565 ; perimeter
G1 X193.619 Y115.985 E0.67306 ; perimeter
G1 X170.534 Y135.355 E1.24141 ; perimeter
G1 X124.775 Y135.355 E1.88510 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.484 Y135.029 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y135.355 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.100 F10800.000 ; lift Z
G1 X163.256 Y117.855 ; move to first infill point
G1 Z2.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 P17 R113
G1 F8064.81
G1 X164.742 Y116.369 E0.09750 ; infill
G1 X165.374 Y116.369 E0.02929 ; infill
G1 X163.544 Y118.198 E0.12003 ; infill
G1 F8640
G1 X165.374 Y116.369 E-0.59734 ; wipe and retract
G1 X164.742 Y116.369 E-0.14576 ; wipe and retract
G1 X164.691 Y116.421 E-0.01690 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.100 F10800.000 ; lift Z
G1 X85.167 Y118.031 ; move to first infill point
G1 Z2.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7943.9
G1 X86.039 Y117.159 E0.05808 ; infill
G1 X85.690 Y116.866 E0.02143 ; infill
G1 X84.961 Y117.596 E0.04859 ; infill
G1 X84.612 Y117.303 E0.02143 ; infill
G1 X85.342 Y116.574 E0.04859 ; infill
G1 X85.098 Y116.369 E0.01501 ; infill
G1 X84.906 Y116.369 E0.00904 ; infill
G1 X84.264 Y117.011 E0.04275 ; infill
G1 X83.915 Y116.718 E0.02143 ; infill
G1 X84.265 Y116.369 E0.02328 ; infill
G1 X83.624 Y116.369 E0.03019 ; infill
G1 X83.424 Y116.569 E0.01329 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;2.75


G1 F8640
G1 X83.624 Y116.369 E-0.06517 ; wipe and retract
G1 X84.265 Y116.369 E-0.14799 ; wipe and retract
G1 X83.915 Y116.718 E-0.11410 ; wipe and retract
G1 X84.264 Y117.011 E-0.10504 ; wipe and retract
G1 X84.906 Y116.369 E-0.20959 ; wipe and retract
G1 X85.098 Y116.369 E-0.04432 ; wipe and retract
G1 X85.342 Y116.574 E-0.07358 ; wipe and retract
G1 X85.341 Y116.575 E-0.00022 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;2.75
G1 X125.000 Y96.071 ; move to first perimeter point
G1 Z2.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.595 Y96.071 E1.87051 ; perimeter
G1 X75.957 Y93.019 E0.19560 ; perimeter
G1 X87.119 Y79.718 E0.71533 ; perimeter
G1 X94.088 Y85.565 E0.37476 ; perimeter
G1 X155.912 Y85.565 E2.54691 ; perimeter
G1 X162.881 Y79.718 E0.37476 ; perimeter
G1 X174.043 Y93.019 E0.71533 ; perimeter
G1 X170.405 Y96.071 E0.19560 ; perimeter
G1 X125.060 Y96.071 E1.86804 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y95.675 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.739 Y95.675 E1.86457 ; perimeter
G1 X76.516 Y92.971 E0.17333 ; perimeter
G1 X87.168 Y80.276 E0.68268 ; perimeter
G1 X93.943 Y85.961 E0.36438 ; perimeter
G1 X156.057 Y85.961 E2.55880 ; perimeter
G1 X162.832 Y80.276 E0.36438 ; perimeter
G1 X173.484 Y92.971 E0.68268 ; perimeter
G1 X170.261 Y95.675 E0.17333 ; perimeter
G1 X125.060 Y95.675 E1.86210 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.806 Y96.025 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y95.675 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.350 F10800.000 ; lift Z
G1 X174.453 Y92.675 ; move to first perimeter point
G1 Z2.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X171.411 Y89.051 E0.19492 ; perimeter
G1 X174.330 Y86.602 E0.15696 ; perimeter
G1 X173.986 Y86.192 E0.02205 ; perimeter
G1 X171.067 Y88.641 E0.15696 ; perimeter
G1 X164.391 Y80.684 E0.42789 ; perimeter
G1 X167.289 Y78.252 E0.15587 ; perimeter
G1 X169.765 Y78.252 E0.10198 ; perimeter
G1 X183.456 Y66.763 E0.73630 ; perimeter
G1 X185.355 Y69.026 E0.12167 ; perimeter
G1 X182.529 Y71.397 E0.15195 ; perimeter
G1 X182.873 Y71.807 E0.02205 ; perimeter
G1 X185.699 Y69.436 E0.15195 ; perimeter
G1 X189.110 Y73.501 E0.21861 ; perimeter
G1 X186.284 Y75.872 E0.15195 ; perimeter
G1 X186.628 Y76.282 E0.02205 ; perimeter
G1 X189.454 Y73.911 E0.15195 ; perimeter
G1 X192.495 Y77.536 E0.19492 ; perimeter
G1 X174.499 Y92.637 E0.96781 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.502 Y92.117 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.970 Y89.100 E0.16226 ; perimeter
G1 X174.888 Y86.651 E0.15696 ; perimeter
G1 X174.035 Y85.633 E0.05471 ; perimeter
G1 X171.116 Y88.082 E0.15696 ; perimeter
G1 X164.949 Y80.733 E0.39523 ; perimeter
G1 X167.433 Y78.648 E0.13360 ; perimeter
G1 X169.909 Y78.648 E0.10198 ; perimeter
G1 X183.407 Y67.322 E0.72591 ; perimeter
G1 X184.796 Y68.977 E0.08901 ; perimeter
G1 X181.971 Y71.348 E0.15195 ; perimeter
G1 X182.824 Y72.365 E0.05471 ; perimeter
G1 X185.650 Y69.994 E0.15195 ; perimeter
G1 X188.552 Y73.452 E0.18596 ; perimeter
G1 X185.726 Y75.823 E0.15195 ; perimeter
G1 X186.580 Y76.841 E0.05471 ; perimeter
G1 X189.405 Y74.470 E0.15195 ; perimeter
G1 X191.937 Y77.487 E0.16226 ; perimeter
G1 X174.548 Y92.078 E0.93516 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.210 Y92.391 F10800.000 ; move inwards before travel
G1 F8640
G1 X172.394 Y89.590 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.350 F10800.000 ; lift Z
G1 X125.000 Y96.592 ; move to first perimeter point
G1 Z2.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.405 Y96.592 E1.87831 ; perimeter
G1 X56.966 Y77.763 E1.20670 ; perimeter
G1 X57.046 Y77.668 E0.00510 ; perimeter
G1 X79.450 Y96.468 E1.20484 ; perimeter
G1 X91.349 Y96.468 E0.49018 ; perimeter
G1 X170.550 Y96.468 E3.26273 ; perimeter
G1 X192.954 Y77.668 E1.20484 ; perimeter
G1 X193.034 Y77.763 E0.00510 ; perimeter
G1 X170.595 Y96.592 E1.20670 ; perimeter
G1 X125.060 Y96.592 E1.87584 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y96.592 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.350 F10800.000 ; lift Z
G1 X125.000 Y85.169 ; move to first perimeter point
G1 Z2.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.232 Y85.169 E1.26751 ; perimeter
G1 X87.070 Y79.159 E0.38515 ; perimeter
G1 X85.970 Y80.470 E0.07048 ; perimeter
G1 X82.855 Y77.856 E0.16753 ; perimeter
G1 X80.380 Y77.856 E0.10198 ; perimeter
G1 X66.595 Y66.289 E0.74132 ; perimeter
G1 X66.674 Y66.194 E0.00510 ; perimeter
G1 X80.425 Y77.732 E0.73946 ; perimeter
G1 X85.562 Y77.732 E0.21162 ; perimeter
G1 X94.277 Y85.045 E0.46869 ; perimeter
G1 X155.723 Y85.045 E2.53131 ; perimeter
G1 X164.438 Y77.732 E0.46869 ; perimeter
G1 X169.575 Y77.732 E0.21162 ; perimeter
G1 X183.326 Y66.194 E0.73946 ; perimeter
G1 X183.405 Y66.289 E0.00510 ; perimeter
G1 X169.620 Y77.856 E0.74132 ; perimeter
G1 X167.145 Y77.856 E0.10198 ; perimeter
G1 X164.030 Y80.470 E0.16753 ; perimeter
G1 X162.930 Y79.159 E0.07048 ; perimeter
G1 X155.768 Y85.169 E0.38515 ; perimeter
G1 X125.060 Y85.169 E1.26504 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y85.169 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.350 F10800.000 ; lift Z
G1 X75.547 Y92.675 ; move to first perimeter point
G1 Z2.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.505 Y77.536 E0.97028 ; perimeter
G1 X60.546 Y73.911 E0.19492 ; perimeter
G1 X63.372 Y76.282 E0.15195 ; perimeter
G1 X63.716 Y75.872 E0.02205 ; perimeter
G1 X60.890 Y73.501 E0.15195 ; perimeter
G1 X64.301 Y69.436 E0.21861 ; perimeter
G1 X67.127 Y71.807 E0.15195 ; perimeter
G1 X67.471 Y71.397 E0.02205 ; perimeter
G1 X64.645 Y69.026 E0.15195 ; perimeter
G1 X66.544 Y66.763 E0.12167 ; perimeter
G1 X80.235 Y78.252 E0.73630 ; perimeter
G1 X82.711 Y78.252 E0.10198 ; perimeter
G1 X85.609 Y80.684 E0.15587 ; perimeter
G1 X78.933 Y88.641 E0.42789 ; perimeter
G1 X76.014 Y86.192 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.586 Y92.629 E0.19244 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.498 Y92.117 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X58.063 Y77.487 E0.93763 ; perimeter
G1 X60.595 Y74.470 E0.16226 ; perimeter
G1 X63.420 Y76.841 E0.15195 ; perimeter
G1 X64.274 Y75.823 E0.05471 ; perimeter
G1 X61.448 Y73.452 E0.15195 ; perimeter
G1 X64.350 Y69.994 E0.18596 ; perimeter
G1 X67.176 Y72.365 E0.15195 ; perimeter
G1 X68.029 Y71.348 E0.05471 ; perimeter
G1 X65.204 Y68.977 E0.15195 ; perimeter
G1 X66.593 Y67.322 E0.08901 ; perimeter
G1 X80.091 Y78.648 E0.72591 ; perimeter
G1 X82.567 Y78.648 E0.10198 ; perimeter
G1 X85.051 Y80.733 E0.13360 ; perimeter
G1 X78.884 Y88.082 E0.39523 ; perimeter
G1 X75.965 Y85.633 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.537 Y92.071 E0.15979 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.327 Y92.479 F10800.000 ; move inwards before travel
G1 F8640
G1 X73.010 Y89.962 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.350 F10800.000 ; lift Z
G1 X125.000 Y96.988 ; move to first perimeter point
G1 Z2.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.261 Y96.988 E1.88426 ; perimeter
G1 X56.408 Y77.812 E1.22897 ; perimeter
G1 X66.625 Y65.635 E0.65482 ; perimeter
G1 X80.569 Y77.335 E0.74985 ; perimeter
G1 X85.706 Y77.335 E0.21162 ; perimeter
G1 X94.421 Y84.649 E0.46869 ; perimeter
G1 X155.579 Y84.649 E2.51943 ; perimeter
G1 X164.294 Y77.335 E0.46869 ; perimeter
G1 X169.431 Y77.335 E0.21162 ; perimeter
G1 X183.375 Y65.635 E0.74985 ; perimeter
G1 X193.592 Y77.812 E0.65482 ; perimeter
G1 X170.739 Y96.988 E1.22897 ; perimeter
G1 X125.060 Y96.988 E1.88178 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y97.384 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.117 Y97.384 E1.89020 ; perimeter
G1 X55.850 Y77.861 E1.25124 ; perimeter
G1 X66.576 Y65.077 E0.68748 ; perimeter
G1 X80.713 Y76.939 E0.76023 ; perimeter
G1 X85.850 Y76.939 E0.21162 ; perimeter
G1 X94.566 Y84.252 E0.46869 ; perimeter
G1 X155.434 Y84.252 E2.50754 ; perimeter
G1 X164.150 Y76.939 E0.46869 ; perimeter
G1 X169.287 Y76.939 E0.21162 ; perimeter
G1 X183.424 Y65.077 E0.76023 ; perimeter
G1 X194.150 Y77.861 E0.68748 ; perimeter
G1 X170.883 Y97.384 E1.25124 ; perimeter
G1 X125.060 Y97.384 E1.88773 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.769 Y97.058 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y97.384 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.350 F10800.000 ; lift Z
G1 X163.074 Y79.027 ; move to first infill point
G1 Z2.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X164.070 Y80.023 E0.07133 ; infill
G1 X164.444 Y79.709 E0.02475 ; infill
G1 X163.591 Y78.856 E0.06112 ; infill
G1 X163.965 Y78.541 E0.02475 ; infill
G1 X164.819 Y79.395 E0.06112 ; infill
G1 X165.194 Y79.081 E0.02475 ; infill
G1 X164.340 Y78.227 E0.06112 ; infill
G1 X164.553 Y78.048 E0.01411 ; infill
G1 X164.850 Y78.048 E0.01500 ; infill
G1 X165.568 Y78.766 E0.05144 ; infill
G1 X165.943 Y78.452 E0.02475 ; infill
G1 X165.539 Y78.048 E0.02894 ; infill
G1 X166.227 Y78.048 E0.03487 ; infill
G1 X166.460 Y78.280 E0.01664 ; infill
G1 F8640
G1 X166.227 Y78.048 E-0.07591 ; wipe and retract
G1 X165.539 Y78.048 E-0.15906 ; wipe and retract
G1 X165.943 Y78.452 E-0.13198 ; wipe and retract
G1 X165.568 Y78.766 E-0.11290 ; wipe and retract
G1 X164.850 Y78.048 E-0.23462 ; wipe and retract
G1 X164.652 Y78.048 E-0.04553 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.350 F10800.000 ; lift Z
G1 X86.843 Y79.251 ; move to first infill point
G1 Z2.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X85.439 Y77.847 E0.10232 ; infill
G1 F8640
G1 X86.843 Y79.251 E-0.45837 ; wipe and retract
G1 E-0.34163 F2100.00000 ; retract
G1 Z3.350 F10800.000 ; lift Z
G1 X86.523 Y79.632 ; move to first infill point
G1 Z2.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X84.939 Y78.048 E0.11548 ; infill
G1 X84.238 Y78.048 E0.03615 ; infill
G1 X86.203 Y80.013 E0.14327 ; infill
G1 F8640
G1 X84.238 Y78.048 E-0.64183 ; wipe and retract
G1 X84.749 Y78.048 E-0.11817 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.350 F10800.000 ; lift Z
G1 X124.715 Y134.218 ; move to first perimeter point
G1 Z2.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.309 Y134.218 E1.87051 ; perimeter
M73 Q17 S114
G1 X75.672 Y131.166 E0.19560 ; perimeter
G1 X86.834 Y117.864 E0.71533 ; perimeter
G1 X93.802 Y123.711 E0.37476 ; perimeter
G1 X155.627 Y123.711 E2.54691 ; perimeter
G1 X162.596 Y117.864 E0.37476 ; perimeter
G1 X173.757 Y131.166 E0.71533 ; perimeter
G1 X170.120 Y134.218 E0.19560 ; perimeter
G1 X124.775 Y134.218 E1.86804 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y133.821 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.454 Y133.821 E1.86457 ; perimeter
G1 X76.231 Y131.117 E0.17333 ; perimeter
G1 X86.883 Y118.422 E0.68268 ; perimeter
G1 X93.658 Y124.108 E0.36438 ; perimeter
G1 X155.771 Y124.108 E2.55880 ; perimeter
G1 X162.547 Y118.422 E0.36438 ; perimeter
G1 X173.199 Y131.117 E0.68268 ; perimeter
G1 X169.976 Y133.821 E0.17333 ; perimeter
G1 X124.775 Y133.821 E1.86210 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.521 Y134.171 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y133.821 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.350 F10800.000 ; lift Z
G1 X174.168 Y130.821 ; move to first perimeter point
G1 Z2.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X171.126 Y127.197 E0.19492 ; perimeter
G1 X174.045 Y124.748 E0.15696 ; perimeter
G1 X173.701 Y124.338 E0.02205 ; perimeter
G1 X170.782 Y126.787 E0.15696 ; perimeter
G1 X164.106 Y118.830 E0.42789 ; perimeter
G1 X167.004 Y116.398 E0.15587 ; perimeter
G1 X169.480 Y116.398 E0.10198 ; perimeter
G1 X183.171 Y104.910 E0.73630 ; perimeter
G1 X185.070 Y107.172 E0.12167 ; perimeter
G1 X182.244 Y109.543 E0.15195 ; perimeter
G1 X182.588 Y109.953 E0.02205 ; perimeter
G1 X185.414 Y107.582 E0.15195 ; perimeter
G1 X188.825 Y111.647 E0.21861 ; perimeter
G1 X185.999 Y114.018 E0.15195 ; perimeter
G1 X186.343 Y114.428 E0.02205 ; perimeter
G1 X189.169 Y112.057 E0.15195 ; perimeter
G1 X192.210 Y115.682 E0.19492 ; perimeter
G1 X174.213 Y130.783 E0.96781 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.216 Y130.263 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.685 Y127.246 E0.16226 ; perimeter
G1 X174.603 Y124.797 E0.15696 ; perimeter
G1 X173.750 Y123.779 E0.05471 ; perimeter
G1 X170.831 Y126.229 E0.15696 ; perimeter
G1 X164.664 Y118.879 E0.39523 ; perimeter
G1 X167.148 Y116.795 E0.13360 ; perimeter
G1 X169.624 Y116.795 E0.10198 ; perimeter
G1 X183.122 Y105.468 E0.72591 ; perimeter
G1 X184.511 Y107.123 E0.08901 ; perimeter
G1 X181.686 Y109.494 E0.15195 ; perimeter
G1 X182.539 Y110.511 E0.05471 ; perimeter
G1 X185.365 Y108.141 E0.15195 ; perimeter
G1 X188.266 Y111.598 E0.18596 ; perimeter
G1 X185.441 Y113.969 E0.15195 ; perimeter
G1 X186.294 Y114.987 E0.05471 ; perimeter
G1 X189.120 Y112.616 E0.15195 ; perimeter
G1 X191.652 Y115.633 E0.16226 ; perimeter
G1 X174.262 Y130.225 E0.93516 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.925 Y130.537 F10800.000 ; move inwards before travel
G1 F8640
G1 X172.108 Y127.736 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.350 F10800.000 ; lift Z
G1 X124.715 Y134.738 ; move to first perimeter point
G1 Z2.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 P17 R112
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.120 Y134.738 E1.87831 ; perimeter
G1 X56.681 Y115.909 E1.20670 ; perimeter
G1 X56.761 Y115.814 E0.00510 ; perimeter
G1 X79.165 Y134.614 E1.20484 ; perimeter
G1 X91.064 Y134.614 E0.49018 ; perimeter
G1 X170.265 Y134.614 E3.26273 ; perimeter
G1 X192.669 Y115.814 E1.20484 ; perimeter
G1 X192.749 Y115.909 E0.00510 ; perimeter
G1 X170.310 Y134.738 E1.20670 ; perimeter
G1 X124.775 Y134.738 E1.87584 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y134.738 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.350 F10800.000 ; lift Z
G1 X124.715 Y123.315 ; move to first perimeter point
G1 Z2.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X93.947 Y123.315 E1.26751 ; perimeter
G1 X86.785 Y117.305 E0.38515 ; perimeter
G1 X85.685 Y118.616 E0.07048 ; perimeter
G1 X82.570 Y116.002 E0.16753 ; perimeter
G1 X80.094 Y116.002 E0.10198 ; perimeter
G1 X66.309 Y104.435 E0.74132 ; perimeter
G1 X66.389 Y104.340 E0.00510 ; perimeter
G1 X80.139 Y115.878 E0.73946 ; perimeter
G1 X85.276 Y115.878 E0.21162 ; perimeter
G1 X93.992 Y123.191 E0.46869 ; perimeter
G1 X155.438 Y123.191 E2.53131 ; perimeter
G1 X164.153 Y115.878 E0.46869 ; perimeter
G1 X169.290 Y115.878 E0.21162 ; perimeter
G1 X183.041 Y104.340 E0.73946 ; perimeter
G1 X183.120 Y104.435 E0.00510 ; perimeter
G1 X169.335 Y116.002 E0.74132 ; perimeter
G1 X166.860 Y116.002 E0.10198 ; perimeter
G1 X163.744 Y118.616 E0.16753 ; perimeter
G1 X162.645 Y117.305 E0.07048 ; perimeter
G1 X155.483 Y123.315 E0.38515 ; perimeter
G1 X124.775 Y123.315 E1.26504 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y123.315 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.350 F10800.000 ; lift Z
G1 X75.262 Y130.821 ; move to first perimeter point
G1 Z2.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.219 Y115.682 E0.97028 ; perimeter
G1 X60.261 Y112.057 E0.19492 ; perimeter
G1 X63.086 Y114.428 E0.15195 ; perimeter
G1 X63.430 Y114.018 E0.02205 ; perimeter
G1 X60.605 Y111.647 E0.15195 ; perimeter
G1 X64.016 Y107.582 E0.21861 ; perimeter
G1 X66.842 Y109.953 E0.15195 ; perimeter
G1 X67.186 Y109.543 E0.02205 ; perimeter
G1 X64.360 Y107.172 E0.15195 ; perimeter
G1 X66.258 Y104.910 E0.12167 ; perimeter
G1 X79.950 Y116.398 E0.73630 ; perimeter
G1 X82.426 Y116.398 E0.10198 ; perimeter
G1 X85.324 Y118.830 E0.15587 ; perimeter
G1 X78.648 Y126.787 E0.42789 ; perimeter
G1 X75.729 Y124.338 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.301 Y130.776 E0.19244 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.213 Y130.263 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X57.778 Y115.633 E0.93763 ; perimeter
G1 X60.310 Y112.616 E0.16226 ; perimeter
G1 X63.135 Y114.987 E0.15195 ; perimeter
G1 X63.989 Y113.969 E0.05471 ; perimeter
G1 X61.163 Y111.598 E0.15195 ; perimeter
G1 X64.065 Y108.141 E0.18596 ; perimeter
G1 X66.890 Y110.511 E0.15195 ; perimeter
G1 X67.744 Y109.494 E0.05471 ; perimeter
G1 X64.918 Y107.123 E0.15195 ; perimeter
G1 X66.307 Y105.468 E0.08901 ; perimeter
G1 X79.806 Y116.795 E0.72591 ; perimeter
G1 X82.281 Y116.795 E0.10198 ; perimeter
G1 X84.766 Y118.879 E0.13360 ; perimeter
G1 X78.599 Y126.229 E0.39523 ; perimeter
G1 X75.680 Y123.779 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.252 Y130.217 E0.15979 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.042 Y130.625 F10800.000 ; move inwards before travel
G1 F8640
G1 X72.725 Y128.108 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.350 F10800.000 ; lift Z
G1 X124.715 Y135.134 ; move to first perimeter point
G1 Z2.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.976 Y135.134 E1.88426 ; perimeter
G1 X56.123 Y115.958 E1.22897 ; perimeter
G1 X66.340 Y103.782 E0.65482 ; perimeter
G1 X80.284 Y115.482 E0.74985 ; perimeter
G1 X85.421 Y115.482 E0.21162 ; perimeter
G1 X94.136 Y122.795 E0.46869 ; perimeter
G1 X155.294 Y122.795 E2.51943 ; perimeter
G1 X164.009 Y115.482 E0.46869 ; perimeter
G1 X169.146 Y115.482 E0.21162 ; perimeter
G1 X183.090 Y103.782 E0.74985 ; perimeter
G1 X193.307 Y115.958 E0.65482 ; perimeter
G1 X170.454 Y135.134 E1.22897 ; perimeter
G1 X124.775 Y135.134 E1.88178 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y135.530 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.831 Y135.530 E1.89020 ; perimeter
G1 X55.564 Y116.007 E1.25124 ; perimeter
G1 X66.291 Y103.223 E0.68748 ; perimeter
G1 X80.428 Y115.085 E0.76023 ; perimeter
G1 X85.565 Y115.085 E0.21162 ; perimeter
G1 X94.280 Y122.398 E0.46869 ; perimeter
G1 X155.149 Y122.398 E2.50754 ; perimeter
G1 X163.865 Y115.085 E0.46869 ; perimeter
G1 X169.002 Y115.085 E0.21162 ; perimeter
G1 X183.138 Y103.223 E0.76023 ; perimeter
G1 X193.865 Y116.007 E0.68748 ; perimeter
G1 X170.598 Y135.530 E1.25124 ; perimeter
G1 X124.775 Y135.530 E1.88773 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.484 Y135.204 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y135.530 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.350 F10800.000 ; lift Z
G1 X162.789 Y117.173 ; move to first infill point
G1 Z2.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X163.785 Y118.170 E0.07133 ; infill
G1 X164.159 Y117.855 E0.02475 ; infill
G1 X163.306 Y117.002 E0.06112 ; infill
G1 X163.680 Y116.687 E0.02475 ; infill
G1 X164.534 Y117.541 E0.06112 ; infill
G1 X164.908 Y117.227 E0.02475 ; infill
G1 X164.055 Y116.373 E0.06112 ; infill
G1 X164.268 Y116.194 E0.01411 ; infill
G1 X164.564 Y116.194 E0.01500 ; infill
G1 X165.283 Y116.912 E0.05144 ; infill
G1 X165.658 Y116.598 E0.02475 ; infill
G1 X165.253 Y116.194 E0.02894 ; infill
G1 X165.942 Y116.194 E0.03487 ; infill
G1 X166.175 Y116.426 E0.01664 ; infill
G1 F8640
G1 X165.942 Y116.194 E-0.07591 ; wipe and retract
G1 X165.253 Y116.194 E-0.15906 ; wipe and retract
G1 X165.658 Y116.598 E-0.13198 ; wipe and retract
G1 X165.283 Y116.912 E-0.11290 ; wipe and retract
G1 X164.564 Y116.194 E-0.23462 ; wipe and retract
G1 X164.367 Y116.194 E-0.04553 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.350 F10800.000 ; lift Z
G1 X86.558 Y117.397 ; move to first infill point
G1 Z2.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X85.154 Y115.993 E0.10232 ; infill
G1 F8640
G1 X86.558 Y117.397 E-0.45837 ; wipe and retract
G1 E-0.34163 F2100.00000 ; retract
G1 Z3.350 F10800.000 ; lift Z
G1 X86.238 Y117.778 ; move to first infill point
G1 Z2.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X84.654 Y116.194 E0.11548 ; infill
G1 X83.952 Y116.194 E0.03615 ; infill
G1 X85.918 Y118.159 E0.14327 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;3


G1 F8640
G1 X83.952 Y116.194 E-0.64183 ; wipe and retract
G1 X84.464 Y116.194 E-0.11817 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;3
G1 X125.000 Y96.246 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.531 Y96.246 E1.87314 ; perimeter
G1 X75.845 Y93.154 E0.19822 ; perimeter
G1 X87.231 Y79.584 E0.72976 ; perimeter
G1 X94.151 Y85.390 E0.37214 ; perimeter
G1 X155.849 Y85.390 E2.54166 ; perimeter
G1 X162.769 Y79.584 E0.37214 ; perimeter
G1 X174.155 Y93.154 E0.72976 ; perimeter
G1 X170.469 Y96.246 E0.19822 ; perimeter
G1 X125.060 Y96.246 E1.87067 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y95.850 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.675 Y95.850 E1.86719 ; perimeter
G1 X76.403 Y93.105 E0.17595 ; perimeter
G1 X87.280 Y80.142 E0.69710 ; perimeter
G1 X94.007 Y85.786 E0.36175 ; perimeter
G1 X155.993 Y85.786 E2.55355 ; perimeter
G1 X162.720 Y80.142 E0.36175 ; perimeter
G1 X173.597 Y93.105 E0.69710 ; perimeter
G1 X170.325 Y95.850 E0.17595 ; perimeter
G1 X125.060 Y95.850 E1.86472 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.807 Y96.200 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y95.850 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.600 F10800.000 ; lift Z
G1 X164.047 Y80.274 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X163.179 Y79.239 E0.05564 ; perimeter
G1 X164.564 Y78.077 E0.07450 ; perimeter
G1 X166.665 Y78.077 E0.08655 ; perimeter
G1 X164.093 Y80.235 E0.13833 ; perimeter
M204 S1000 ; adjust acceleration
G1 X164.096 Y79.716 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X163.737 Y79.288 E0.02298 ; perimeter
G1 X164.708 Y78.473 E0.05223 ; perimeter
G1 X165.576 Y78.473 E0.03575 ; perimeter
G1 X164.142 Y79.677 E0.07714 ; perimeter
M204 S1000 ; adjust acceleration
G1 X163.828 Y80.012 F10800.000 ; move inwards before travel
G1 F8640
G1 X163.737 Y79.288 E-0.12955 ; wipe and retract
G1 X164.708 Y78.473 E-0.29274 ; wipe and retract
G1 X165.576 Y78.473 E-0.20039 ; wipe and retract
G1 X165.121 Y78.856 E-0.13732 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.600 F10800.000 ; lift Z
G1 X174.565 Y92.809 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X171.411 Y89.051 E0.20213 ; perimeter
G1 X174.330 Y86.602 E0.15696 ; perimeter
G1 X173.986 Y86.192 E0.02205 ; perimeter
G1 X171.067 Y88.641 E0.15696 ; perimeter
G1 X164.391 Y80.684 E0.42789 ; perimeter
G1 X167.498 Y78.077 E0.16709 ; perimeter
G1 X169.701 Y78.077 E0.09076 ; perimeter
G1 X183.478 Y66.517 E0.74088 ; perimeter
G1 X185.489 Y68.913 E0.12888 ; perimeter
G1 X182.668 Y71.280 E0.15168 ; perimeter
G1 X183.012 Y71.690 E0.02205 ; perimeter
G1 X185.833 Y69.323 E0.15168 ; perimeter
G1 X189.244 Y73.389 E0.21861 ; perimeter
G1 X186.424 Y75.755 E0.15168 ; perimeter
G1 X186.768 Y76.165 E0.02205 ; perimeter
G1 X189.588 Y73.799 E0.15168 ; perimeter
G1 X192.742 Y77.557 E0.20213 ; perimeter
G1 X174.611 Y92.771 E0.97502 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.614 Y92.251 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.970 Y89.100 E0.16947 ; perimeter
G1 X174.888 Y86.651 E0.15696 ; perimeter
G1 X174.035 Y85.633 E0.05471 ; perimeter
G1 X171.116 Y88.082 E0.15696 ; perimeter
G1 X164.949 Y80.733 E0.39523 ; perimeter
G1 X167.642 Y78.473 E0.14481 ; perimeter
G1 X169.845 Y78.473 E0.09076 ; perimeter
G1 X183.429 Y67.075 E0.73050 ; perimeter
G1 X184.930 Y68.865 E0.09623 ; perimeter
G1 X182.110 Y71.231 E0.15168 ; perimeter
G1 X182.964 Y72.249 E0.05471 ; perimeter
G1 X185.784 Y69.882 E0.15168 ; perimeter
G1 X188.686 Y73.340 E0.18596 ; perimeter
G1 X185.865 Y75.707 E0.15168 ; perimeter
G1 X186.719 Y76.724 E0.05471 ; perimeter
G1 X189.539 Y74.357 E0.15168 ; perimeter
G1 X192.184 Y77.508 E0.16947 ; perimeter
G1 X174.660 Y92.212 E0.94237 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.323 Y92.526 F10800.000 ; move inwards before travel
G1 F8640
G1 X172.508 Y89.722 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.600 F10800.000 ; lift Z
G1 X85.953 Y80.274 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q18 S113
M204 S800 ; adjust acceleration
G1 F2400
G1 X83.335 Y78.077 E0.14080 ; perimeter
G1 X85.436 Y78.077 E0.08655 ; perimeter
G1 X86.821 Y79.239 E0.07450 ; perimeter
G1 X85.992 Y80.228 E0.05316 ; perimeter
M204 S1000 ; adjust acceleration
G1 X85.904 Y79.716 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X84.424 Y78.473 E0.07962 ; perimeter
G1 X85.292 Y78.473 E0.03575 ; perimeter
G1 X86.263 Y79.288 E0.05223 ; perimeter
G1 X85.943 Y79.670 E0.02051 ; perimeter
M204 S1000 ; adjust acceleration
G1 X85.781 Y80.096 F10800.000 ; move inwards before travel
G1 F8640
G1 X84.424 Y78.473 E-0.44646 ; wipe and retract
G1 X85.292 Y78.473 E-0.20038 ; wipe and retract
G1 X85.667 Y78.788 E-0.11315 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.600 F10800.000 ; lift Z
G1 X125.000 Y84.994 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.296 Y84.994 E1.26489 ; perimeter
G1 X85.580 Y77.681 E0.46869 ; perimeter
G1 X80.443 Y77.681 E0.21162 ; perimeter
G1 X66.573 Y66.042 E0.74591 ; perimeter
G1 X66.653 Y65.947 E0.00510 ; perimeter
G1 X80.488 Y77.557 E0.74405 ; perimeter
G1 X85.625 Y77.557 E0.21162 ; perimeter
G1 X94.341 Y84.870 E0.46869 ; perimeter
G1 X155.659 Y84.870 E2.52606 ; perimeter
G1 X164.375 Y77.557 E0.46869 ; perimeter
G1 X169.512 Y77.557 E0.21162 ; perimeter
G1 X183.347 Y65.947 E0.74405 ; perimeter
G1 X183.427 Y66.042 E0.00510 ; perimeter
G1 X169.557 Y77.681 E0.74591 ; perimeter
G1 X164.420 Y77.681 E0.21162 ; perimeter
G1 X155.704 Y84.994 E0.46869 ; perimeter
G1 X125.060 Y84.994 E1.26242 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y84.994 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.600 F10800.000 ; lift Z
G1 X125.000 Y96.767 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.341 Y96.767 E1.88094 ; perimeter
G1 X56.720 Y77.785 E1.21654 ; perimeter
G1 X56.799 Y77.690 E0.00510 ; perimeter
G1 X79.387 Y96.643 E1.21468 ; perimeter
G1 X93.412 Y96.643 E0.57781 ; perimeter
G1 X170.613 Y96.643 E3.18035 ; perimeter
G1 X193.201 Y77.690 E1.21468 ; perimeter
G1 X193.280 Y77.785 E0.00510 ; perimeter
G1 X170.659 Y96.767 E1.21654 ; perimeter
G1 X125.060 Y96.767 E1.87847 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y96.767 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.600 F10800.000 ; lift Z
G1 X75.435 Y92.809 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.258 Y77.557 E0.97749 ; perimeter
G1 X60.412 Y73.799 E0.20213 ; perimeter
G1 X63.232 Y76.165 E0.15168 ; perimeter
G1 X63.576 Y75.755 E0.02205 ; perimeter
G1 X60.756 Y73.389 E0.15168 ; perimeter
G1 X64.167 Y69.323 E0.21861 ; perimeter
G1 X66.988 Y71.690 E0.15168 ; perimeter
G1 X67.332 Y71.280 E0.02205 ; perimeter
G1 X64.511 Y68.913 E0.15168 ; perimeter
G1 X66.522 Y66.517 E0.12888 ; perimeter
G1 X80.299 Y78.077 E0.74088 ; perimeter
G1 X82.502 Y78.077 E0.09076 ; perimeter
G1 X85.609 Y80.684 E0.16709 ; perimeter
G1 X78.933 Y88.641 E0.42789 ; perimeter
G1 X76.014 Y86.192 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.473 Y92.763 E0.19966 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.386 Y92.251 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X57.816 Y77.508 E0.94484 ; perimeter
G1 X60.461 Y74.357 E0.16947 ; perimeter
G1 X63.281 Y76.724 E0.15168 ; perimeter
G1 X64.135 Y75.707 E0.05471 ; perimeter
M73 P18 R111
G1 X61.314 Y73.340 E0.15168 ; perimeter
G1 X64.216 Y69.882 E0.18596 ; perimeter
G1 X67.036 Y72.249 E0.15168 ; perimeter
G1 X67.890 Y71.231 E0.05471 ; perimeter
G1 X65.070 Y68.865 E0.15168 ; perimeter
G1 X66.571 Y67.075 E0.09623 ; perimeter
G1 X80.155 Y78.473 E0.73050 ; perimeter
G1 X82.358 Y78.473 E0.09076 ; perimeter
G1 X85.051 Y80.733 E0.14481 ; perimeter
G1 X78.884 Y88.082 E0.39523 ; perimeter
G1 X75.965 Y85.633 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.424 Y92.205 E0.16700 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.212 Y92.611 F10800.000 ; move inwards before travel
G1 F8640
G1 X72.898 Y90.096 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.600 F10800.000 ; lift Z
G1 X125.000 Y97.163 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.197 Y97.163 E1.88688 ; perimeter
G1 X56.161 Y77.834 E1.23881 ; perimeter
G1 X66.604 Y65.389 E0.66925 ; perimeter
G1 X80.633 Y77.160 E0.75443 ; perimeter
G1 X85.770 Y77.160 E0.21162 ; perimeter
G1 X94.485 Y84.474 E0.46869 ; perimeter
G1 X155.515 Y84.474 E2.51418 ; perimeter
G1 X164.230 Y77.160 E0.46869 ; perimeter
G1 X169.367 Y77.160 E0.21162 ; perimeter
G1 X183.396 Y65.389 E0.75444 ; perimeter
G1 X193.839 Y77.834 E0.66924 ; perimeter
G1 X170.803 Y97.163 E1.23881 ; perimeter
G1 X125.060 Y97.163 E1.88441 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y97.559 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.053 Y97.559 E1.89282 ; perimeter
G1 X55.603 Y77.882 E1.26108 ; perimeter
G1 X66.555 Y64.830 E0.70190 ; perimeter
G1 X80.777 Y76.764 E0.76482 ; perimeter
G1 X85.914 Y76.764 E0.21162 ; perimeter
G1 X94.629 Y84.077 E0.46869 ; perimeter
G1 X155.371 Y84.077 E2.50229 ; perimeter
G1 X164.086 Y76.764 E0.46869 ; perimeter
G1 X169.223 Y76.764 E0.21162 ; perimeter
G1 X183.445 Y64.830 E0.76482 ; perimeter
G1 X194.397 Y77.882 E0.70190 ; perimeter
G1 X170.947 Y97.559 E1.26108 ; perimeter
G1 X125.060 Y97.559 E1.89035 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.769 Y97.233 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y97.559 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.600 F10800.000 ; lift Z
G1 X124.715 Y134.393 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.246 Y134.393 E1.87314 ; perimeter
G1 X75.560 Y131.300 E0.19822 ; perimeter
G1 X86.946 Y117.730 E0.72976 ; perimeter
G1 X93.866 Y123.536 E0.37214 ; perimeter
G1 X155.563 Y123.536 E2.54166 ; perimeter
G1 X162.483 Y117.730 E0.37214 ; perimeter
G1 X173.870 Y131.300 E0.72976 ; perimeter
G1 X170.184 Y134.393 E0.19822 ; perimeter
G1 X124.775 Y134.393 E1.87067 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y133.996 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.390 Y133.996 E1.86719 ; perimeter
G1 X76.118 Y131.251 E0.17595 ; perimeter
G1 X86.995 Y118.288 E0.69710 ; perimeter
G1 X93.722 Y123.933 E0.36175 ; perimeter
G1 X155.708 Y123.933 E2.55355 ; perimeter
G1 X162.435 Y118.288 E0.36175 ; perimeter
G1 X173.312 Y131.251 E0.69710 ; perimeter
G1 X170.040 Y133.996 E0.17595 ; perimeter
G1 X124.775 Y133.996 E1.86472 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.521 Y134.346 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y133.996 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.600 F10800.000 ; lift Z
G1 X163.762 Y118.420 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X162.893 Y117.386 E0.05564 ; perimeter
G1 X164.279 Y116.223 E0.07450 ; perimeter
G1 X166.380 Y116.223 E0.08655 ; perimeter
G1 X163.808 Y118.382 E0.13833 ; perimeter
M204 S1000 ; adjust acceleration
G1 X163.810 Y117.862 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X163.452 Y117.434 E0.02298 ; perimeter
G1 X164.423 Y116.620 E0.05223 ; perimeter
G1 X165.291 Y116.620 E0.03575 ; perimeter
G1 X163.856 Y117.823 E0.07714 ; perimeter
M204 S1000 ; adjust acceleration
G1 X163.542 Y118.159 F10800.000 ; move inwards before travel
G1 F8640
G1 X163.452 Y117.434 E-0.12955 ; wipe and retract
G1 X164.423 Y116.620 E-0.29274 ; wipe and retract
G1 X165.291 Y116.620 E-0.20039 ; wipe and retract
G1 X164.835 Y117.002 E-0.13732 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.600 F10800.000 ; lift Z
G1 X174.280 Y130.956 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X171.126 Y127.197 E0.20213 ; perimeter
G1 X174.045 Y124.748 E0.15696 ; perimeter
G1 X173.701 Y124.338 E0.02205 ; perimeter
G1 X170.782 Y126.787 E0.15696 ; perimeter
G1 X164.106 Y118.830 E0.42789 ; perimeter
G1 X167.213 Y116.223 E0.16709 ; perimeter
G1 X169.416 Y116.223 E0.09076 ; perimeter
G1 X183.193 Y104.663 E0.74088 ; perimeter
G1 X185.204 Y107.060 E0.12888 ; perimeter
G1 X182.383 Y109.426 E0.15168 ; perimeter
G1 X182.727 Y109.836 E0.02205 ; perimeter
G1 X185.548 Y107.470 E0.15168 ; perimeter
G1 X188.959 Y111.535 E0.21861 ; perimeter
G1 X186.138 Y113.902 E0.15168 ; perimeter
G1 X186.482 Y114.312 E0.02205 ; perimeter
G1 X189.303 Y111.945 E0.15168 ; perimeter
G1 X192.457 Y115.703 E0.20213 ; perimeter
G1 X174.326 Y130.917 E0.97502 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.329 Y130.397 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.685 Y127.246 E0.16947 ; perimeter
G1 X174.603 Y124.797 E0.15696 ; perimeter
G1 X173.750 Y123.779 E0.05471 ; perimeter
G1 X170.831 Y126.229 E0.15696 ; perimeter
G1 X164.664 Y118.879 E0.39523 ; perimeter
G1 X167.357 Y116.620 E0.14481 ; perimeter
G1 X169.560 Y116.620 E0.09076 ; perimeter
G1 X183.144 Y105.221 E0.73050 ; perimeter
G1 X184.645 Y107.011 E0.09623 ; perimeter
G1 X181.825 Y109.377 E0.15168 ; perimeter
G1 X182.678 Y110.395 E0.05471 ; perimeter
G1 X185.499 Y108.028 E0.15168 ; perimeter
G1 X188.400 Y111.486 E0.18596 ; perimeter
G1 X185.580 Y113.853 E0.15168 ; perimeter
G1 X186.434 Y114.870 E0.05471 ; perimeter
G1 X189.254 Y112.503 E0.15168 ; perimeter
G1 X191.898 Y115.655 E0.16947 ; perimeter
G1 X174.375 Y130.359 E0.94237 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.038 Y130.672 F10800.000 ; move inwards before travel
G1 F8640
G1 X172.223 Y127.868 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.600 F10800.000 ; lift Z
G1 X85.668 Y118.420 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X83.050 Y116.223 E0.14080 ; perimeter
G1 X85.151 Y116.223 E0.08655 ; perimeter
G1 X86.536 Y117.386 E0.07450 ; perimeter
G1 X85.707 Y118.374 E0.05316 ; perimeter
M204 S1000 ; adjust acceleration
G1 X85.619 Y117.862 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X84.139 Y116.620 E0.07962 ; perimeter
G1 X85.007 Y116.620 E0.03575 ; perimeter
G1 X85.978 Y117.434 E0.05223 ; perimeter
G1 X85.658 Y117.816 E0.02051 ; perimeter
M204 S1000 ; adjust acceleration
G1 X85.496 Y118.242 F10800.000 ; move inwards before travel
G1 F8640
G1 X84.139 Y116.620 E-0.44646 ; wipe and retract
G1 X85.007 Y116.620 E-0.20038 ; wipe and retract
G1 X85.382 Y116.935 E-0.11315 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.600 F10800.000 ; lift Z
G1 X124.715 Y123.140 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.010 Y123.140 E1.26489 ; perimeter
G1 X85.295 Y115.827 E0.46869 ; perimeter
G1 X80.158 Y115.827 E0.21162 ; perimeter
G1 X66.288 Y104.188 E0.74591 ; perimeter
G1 X66.367 Y104.093 E0.00510 ; perimeter
G1 X80.203 Y115.703 E0.74405 ; perimeter
G1 X85.340 Y115.703 E0.21162 ; perimeter
G1 X94.056 Y123.016 E0.46869 ; perimeter
G1 X155.374 Y123.016 E2.52606 ; perimeter
G1 X164.089 Y115.703 E0.46869 ; perimeter
G1 X169.226 Y115.703 E0.21162 ; perimeter
G1 X183.062 Y104.093 E0.74405 ; perimeter
G1 X183.142 Y104.188 E0.00510 ; perimeter
G1 X169.272 Y115.827 E0.74591 ; perimeter
G1 X164.135 Y115.827 E0.21162 ; perimeter
G1 X155.419 Y123.140 E0.46869 ; perimeter
G1 X124.775 Y123.140 E1.26242 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y123.140 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.600 F10800.000 ; lift Z
G1 X124.715 Y134.913 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.056 Y134.913 E1.88094 ; perimeter
G1 X56.435 Y115.931 E1.21654 ; perimeter
G1 X56.514 Y115.836 E0.00510 ; perimeter
G1 X79.101 Y134.789 E1.21468 ; perimeter
G1 X93.127 Y134.789 E0.57781 ; perimeter
G1 X170.328 Y134.789 E3.18035 ; perimeter
G1 X192.916 Y115.836 E1.21468 ; perimeter
G1 X192.995 Y115.931 E0.00510 ; perimeter
G1 X170.373 Y134.913 E1.21654 ; perimeter
G1 X124.775 Y134.913 E1.87847 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y134.913 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.600 F10800.000 ; lift Z
G1 X75.150 Y130.956 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X56.973 Y115.703 E0.97749 ; perimeter
G1 X60.127 Y111.945 E0.20213 ; perimeter
G1 X62.947 Y114.312 E0.15168 ; perimeter
G1 X63.291 Y113.902 E0.02205 ; perimeter
G1 X60.471 Y111.535 E0.15168 ; perimeter
G1 X63.882 Y107.470 E0.21861 ; perimeter
G1 X66.702 Y109.836 E0.15168 ; perimeter
G1 X67.046 Y109.426 E0.02205 ; perimeter
G1 X64.226 Y107.060 E0.15168 ; perimeter
G1 X66.237 Y104.663 E0.12888 ; perimeter
G1 X80.014 Y116.223 E0.74088 ; perimeter
G1 X82.217 Y116.223 E0.09076 ; perimeter
G1 X85.324 Y118.830 E0.16709 ; perimeter
G1 X78.648 Y126.787 E0.42789 ; perimeter
G1 X75.729 Y124.338 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.188 Y130.910 E0.19966 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.101 Y130.397 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X57.531 Y115.655 E0.94484 ; perimeter
G1 X60.176 Y112.503 E0.16947 ; perimeter
G1 X62.996 Y114.870 E0.15168 ; perimeter
G1 X63.850 Y113.853 E0.05471 ; perimeter
G1 X61.029 Y111.486 E0.15168 ; perimeter
G1 X63.931 Y108.028 E0.18596 ; perimeter
G1 X66.751 Y110.395 E0.15168 ; perimeter
G1 X67.605 Y109.377 E0.05471 ; perimeter
G1 X64.784 Y107.011 E0.15168 ; perimeter
G1 X66.286 Y105.221 E0.09623 ; perimeter
G1 X79.870 Y116.620 E0.73050 ; perimeter
M73 Q18 S112
G1 X82.073 Y116.620 E0.09076 ; perimeter
G1 X84.766 Y118.879 E0.14481 ; perimeter
G1 X78.599 Y126.229 E0.39523 ; perimeter
G1 X75.680 Y123.779 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.139 Y130.351 E0.16700 ; perimeter
M204 S1000 ; adjust acceleration
G1 X74.927 Y130.758 F10800.000 ; move inwards before travel
G1 F8640
G1 X72.612 Y128.242 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.600 F10800.000 ; lift Z
G1 X124.715 Y135.309 ; move to first perimeter point
G1 Z3.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.912 Y135.309 E1.88688 ; perimeter
G1 X55.876 Y115.980 E1.23881 ; perimeter
G1 X66.319 Y103.535 E0.66925 ; perimeter
G1 X80.347 Y115.307 E0.75443 ; perimeter
G1 X85.484 Y115.307 E0.21162 ; perimeter
G1 X94.200 Y122.620 E0.46869 ; perimeter
G1 X155.230 Y122.620 E2.51418 ; perimeter
G1 X163.945 Y115.307 E0.46869 ; perimeter
G1 X169.082 Y115.307 E0.21162 ; perimeter
G1 X183.111 Y103.535 E0.75444 ; perimeter
G1 X193.554 Y115.980 E0.66924 ; perimeter
G1 X170.518 Y135.309 E1.23881 ; perimeter
G1 X124.775 Y135.309 E1.88441 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y135.706 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.768 Y135.706 E1.89282 ; perimeter
G1 X55.318 Y116.029 E1.26108 ; perimeter
G1 X66.270 Y102.977 E0.70190 ; perimeter
G1 X80.492 Y114.910 E0.76482 ; perimeter
G1 X85.629 Y114.910 E0.21162 ; perimeter
G1 X94.344 Y122.223 E0.46869 ; perimeter
G1 X155.086 Y122.223 E2.50229 ; perimeter
G1 X163.801 Y114.910 E0.46869 ; perimeter
G1 X168.938 Y114.910 E0.21162 ; perimeter
G1 X183.160 Y102.977 E0.76482 ; perimeter
G1 X194.112 Y116.029 E0.70190 ; perimeter
G1 X170.662 Y135.706 E1.26108 ; perimeter
G1 X124.775 Y135.706 E1.89035 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.484 Y135.379 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;3.25


G1 F8640
G1 X121.483 Y135.706 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;3.25
G1 X125.000 Y96.421 ; move to first perimeter point
G1 Z3.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.467 Y96.421 E1.87576 ; perimeter
G1 X75.732 Y93.288 E0.20085 ; perimeter
G1 X87.344 Y79.449 E0.74418 ; perimeter
G1 X94.215 Y85.215 E0.36951 ; perimeter
G1 X155.785 Y85.215 E2.53642 ; perimeter
M73 P19 R110
G1 X162.656 Y79.449 E0.36951 ; perimeter
G1 X174.268 Y93.288 E0.74418 ; perimeter
G1 X170.533 Y96.421 E0.20085 ; perimeter
G1 X125.060 Y96.421 E1.87329 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y96.025 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.611 Y96.025 E1.86982 ; perimeter
G1 X76.291 Y93.239 E0.17858 ; perimeter
G1 X87.393 Y80.008 E0.71152 ; perimeter
G1 X94.071 Y85.611 E0.35913 ; perimeter
G1 X155.929 Y85.611 E2.54830 ; perimeter
G1 X162.607 Y80.008 E0.35913 ; perimeter
G1 X173.709 Y93.239 E0.71152 ; perimeter
G1 X170.389 Y96.025 E0.17858 ; perimeter
G1 X125.060 Y96.025 E1.86735 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.807 Y96.375 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y96.025 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.850 F10800.000 ; lift Z
G1 X164.047 Y80.274 ; move to first perimeter point
G1 Z3.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X163.066 Y79.105 E0.06285 ; perimeter
G1 X164.500 Y77.902 E0.07712 ; perimeter
G1 X166.874 Y77.902 E0.09777 ; perimeter
G1 X164.093 Y80.235 E0.14955 ; perimeter
M204 S1000 ; adjust acceleration
G1 X164.096 Y79.716 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X163.625 Y79.154 E0.03019 ; perimeter
G1 X164.645 Y78.298 E0.05485 ; perimeter
G1 X165.785 Y78.298 E0.04697 ; perimeter
G1 X164.142 Y79.677 E0.08836 ; perimeter
M204 S1000 ; adjust acceleration
G1 X163.836 Y80.020 F10800.000 ; move inwards before travel
G1 F8640
G1 X163.625 Y79.154 E-0.16979 ; wipe and retract
G1 X164.645 Y78.298 E-0.30746 ; wipe and retract
G1 X165.785 Y78.298 E-0.26327 ; wipe and retract
G1 X165.720 Y78.353 E-0.01949 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.850 F10800.000 ; lift Z
G1 X174.678 Y92.944 ; move to first perimeter point
G1 Z3.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X171.411 Y89.051 E0.20934 ; perimeter
G1 X174.330 Y86.602 E0.15696 ; perimeter
G1 X173.986 Y86.192 E0.02205 ; perimeter
G1 X171.067 Y88.641 E0.15696 ; perimeter
G1 X164.391 Y80.684 E0.42789 ; perimeter
G1 X167.706 Y77.902 E0.17830 ; perimeter
G1 X169.637 Y77.902 E0.07954 ; perimeter
G1 X183.499 Y66.270 E0.74547 ; perimeter
G1 X185.623 Y68.801 E0.13609 ; perimeter
G1 X182.807 Y71.163 E0.15141 ; perimeter
G1 X183.152 Y71.573 E0.02205 ; perimeter
G1 X185.967 Y69.211 E0.15141 ; perimeter
G1 X189.378 Y73.276 E0.21861 ; perimeter
G1 X186.563 Y75.639 E0.15141 ; perimeter
G1 X186.907 Y76.049 E0.02205 ; perimeter
G1 X189.722 Y73.686 E0.15141 ; perimeter
G1 X192.989 Y77.579 E0.20934 ; perimeter
G1 X174.724 Y92.905 E0.98223 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.727 Y92.385 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.970 Y89.100 E0.17668 ; perimeter
G1 X174.888 Y86.651 E0.15696 ; perimeter
G1 X174.035 Y85.633 E0.05471 ; perimeter
G1 X171.116 Y88.082 E0.15696 ; perimeter
G1 X164.949 Y80.733 E0.39523 ; perimeter
G1 X167.851 Y78.298 E0.15603 ; perimeter
G1 X169.782 Y78.298 E0.07954 ; perimeter
G1 X183.451 Y66.829 E0.73508 ; perimeter
G1 X185.065 Y68.752 E0.10344 ; perimeter
G1 X182.249 Y71.115 E0.15141 ; perimeter
G1 X183.103 Y72.132 E0.05471 ; perimeter
G1 X185.918 Y69.769 E0.15141 ; perimeter
G1 X188.820 Y73.227 E0.18596 ; perimeter
G1 X186.004 Y75.590 E0.15141 ; perimeter
G1 X186.858 Y76.607 E0.05471 ; perimeter
G1 X189.673 Y74.245 E0.15141 ; perimeter
G1 X192.430 Y77.530 E0.17668 ; perimeter
G1 X174.773 Y92.347 E0.94958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.436 Y92.661 F10800.000 ; move inwards before travel
G1 F8640
G1 X172.622 Y89.855 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.850 F10800.000 ; lift Z
G1 X125.000 Y96.942 ; move to first perimeter point
G1 Z3.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.278 Y96.942 E1.88356 ; perimeter
G1 X56.473 Y77.806 E1.22637 ; perimeter
G1 X56.553 Y77.711 E0.00510 ; perimeter
G1 X79.323 Y96.818 E1.22452 ; perimeter
G1 X95.476 Y96.818 E0.66543 ; perimeter
G1 X170.677 Y96.818 E3.09798 ; perimeter
G1 X193.447 Y77.711 E1.22452 ; perimeter
G1 X193.527 Y77.806 E0.00510 ; perimeter
G1 X170.722 Y96.942 E1.22637 ; perimeter
G1 X125.060 Y96.942 E1.88109 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y96.942 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.850 F10800.000 ; lift Z
G1 X85.953 Y80.274 ; move to first perimeter point
G1 Z3.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X83.126 Y77.902 E0.15202 ; perimeter
G1 X85.500 Y77.902 E0.09777 ; perimeter
G1 X86.934 Y79.105 E0.07712 ; perimeter
G1 X85.992 Y80.228 E0.06038 ; perimeter
M204 S1000 ; adjust acceleration
G1 X85.904 Y79.716 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X84.215 Y78.298 E0.09083 ; perimeter
G1 X85.355 Y78.298 E0.04697 ; perimeter
G1 X86.375 Y79.154 E0.05485 ; perimeter
G1 X85.943 Y79.670 E0.02772 ; perimeter
M204 S1000 ; adjust acceleration
G1 X85.770 Y80.092 F10800.000 ; move inwards before travel
G1 F8640
G1 X84.215 Y78.298 E-0.50932 ; wipe and retract
G1 X85.301 Y78.298 E-0.25068 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.850 F10800.000 ; lift Z
G1 X125.000 Y84.819 ; move to first perimeter point
G1 Z3.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.359 Y84.819 E1.26226 ; perimeter
G1 X85.644 Y77.506 E0.46869 ; perimeter
G1 X80.507 Y77.506 E0.21162 ; perimeter
G1 X66.551 Y65.795 E0.75049 ; perimeter
G1 X66.631 Y65.701 E0.00510 ; perimeter
G1 X80.552 Y77.382 E0.74864 ; perimeter
G1 X85.689 Y77.382 E0.21162 ; perimeter
G1 X94.404 Y84.695 E0.46869 ; perimeter
G1 X155.596 Y84.695 E2.52081 ; perimeter
G1 X164.311 Y77.382 E0.46869 ; perimeter
G1 X169.448 Y77.382 E0.21162 ; perimeter
G1 X183.369 Y65.701 E0.74864 ; perimeter
G1 X183.449 Y65.795 E0.00510 ; perimeter
G1 X169.493 Y77.506 E0.75049 ; perimeter
G1 X164.356 Y77.506 E0.21162 ; perimeter
G1 X155.641 Y84.819 E0.46869 ; perimeter
G1 X125.060 Y84.819 E1.25979 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y84.819 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.850 F10800.000 ; lift Z
G1 X75.322 Y92.944 ; move to first perimeter point
G1 Z3.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.011 Y77.579 E0.98471 ; perimeter
G1 X60.278 Y73.686 E0.20934 ; perimeter
G1 X63.093 Y76.049 E0.15141 ; perimeter
G1 X63.437 Y75.639 E0.02205 ; perimeter
G1 X60.622 Y73.276 E0.15141 ; perimeter
G1 X64.033 Y69.211 E0.21861 ; perimeter
G1 X66.848 Y71.573 E0.15141 ; perimeter
G1 X67.193 Y71.163 E0.02205 ; perimeter
G1 X64.377 Y68.801 E0.15141 ; perimeter
G1 X66.501 Y66.270 E0.13609 ; perimeter
G1 X80.363 Y77.902 E0.74547 ; perimeter
G1 X82.294 Y77.902 E0.07954 ; perimeter
G1 X85.609 Y80.684 E0.17830 ; perimeter
G1 X78.933 Y88.641 E0.42789 ; perimeter
G1 X76.014 Y86.192 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.361 Y92.898 E0.20687 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.273 Y92.385 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X57.570 Y77.530 E0.95205 ; perimeter
G1 X60.327 Y74.245 E0.17668 ; perimeter
G1 X63.142 Y76.607 E0.15141 ; perimeter
G1 X63.996 Y75.590 E0.05471 ; perimeter
G1 X61.180 Y73.227 E0.15141 ; perimeter
G1 X64.082 Y69.769 E0.18596 ; perimeter
G1 X66.897 Y72.132 E0.15141 ; perimeter
G1 X67.751 Y71.115 E0.05471 ; perimeter
G1 X64.935 Y68.752 E0.15141 ; perimeter
G1 X66.549 Y66.829 E0.10344 ; perimeter
G1 X80.218 Y78.298 E0.73508 ; perimeter
G1 X82.149 Y78.298 E0.07954 ; perimeter
G1 X85.051 Y80.733 E0.15603 ; perimeter
G1 X78.884 Y88.082 E0.39523 ; perimeter
G1 X75.965 Y85.633 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.312 Y92.339 E0.17421 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.097 Y92.744 F10800.000 ; move inwards before travel
G1 F8640
G1 X72.785 Y90.230 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.850 F10800.000 ; lift Z
G1 X125.000 Y97.338 ; move to first perimeter point
G1 Z3.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.134 Y97.338 E1.88950 ; perimeter
G1 X55.915 Y77.855 E1.24864 ; perimeter
G1 X66.582 Y65.142 E0.68367 ; perimeter
G1 X80.696 Y76.985 E0.75902 ; perimeter
G1 X85.833 Y76.985 E0.21162 ; perimeter
G1 X94.549 Y84.298 E0.46869 ; perimeter
G1 X155.451 Y84.298 E2.50893 ; perimeter
G1 X164.167 Y76.985 E0.46869 ; perimeter
G1 X169.304 Y76.985 E0.21162 ; perimeter
G1 X183.418 Y65.142 E0.75902 ; perimeter
G1 X194.085 Y77.855 E0.68367 ; perimeter
G1 X170.866 Y97.338 E1.24864 ; perimeter
G1 X125.060 Y97.338 E1.88703 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y97.734 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.989 Y97.734 E1.89545 ; perimeter
G1 X55.356 Y77.904 E1.27091 ; perimeter
G1 X66.533 Y64.584 E0.71632 ; perimeter
G1 X80.841 Y76.589 E0.76941 ; perimeter
G1 X85.978 Y76.589 E0.21162 ; perimeter
G1 X94.693 Y83.902 E0.46869 ; perimeter
G1 X155.307 Y83.902 E2.49704 ; perimeter
G1 X164.022 Y76.589 E0.46869 ; perimeter
G1 X169.159 Y76.589 E0.21162 ; perimeter
G1 X183.467 Y64.584 E0.76941 ; perimeter
G1 X194.644 Y77.904 E0.71632 ; perimeter
G1 X171.011 Y97.734 E1.27091 ; perimeter
G1 X125.060 Y97.734 E1.89298 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.769 Y97.408 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y97.734 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.850 F10800.000 ; lift Z
G1 X124.715 Y134.568 ; move to first perimeter point
G1 Z3.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.182 Y134.568 E1.87576 ; perimeter
G1 X75.447 Y131.434 E0.20085 ; perimeter
G1 X87.059 Y117.596 E0.74418 ; perimeter
G1 X93.930 Y123.361 E0.36951 ; perimeter
G1 X155.500 Y123.361 E2.53642 ; perimeter
M73 Q19 S111
G1 X162.371 Y117.596 E0.36951 ; perimeter
G1 X173.983 Y131.434 E0.74418 ; perimeter
G1 X170.248 Y134.568 E0.20085 ; perimeter
G1 X124.775 Y134.568 E1.87329 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y134.171 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.326 Y134.171 E1.86982 ; perimeter
G1 X76.006 Y131.385 E0.17858 ; perimeter
G1 X87.108 Y118.154 E0.71152 ; perimeter
G1 X93.786 Y123.758 E0.35913 ; perimeter
G1 X155.644 Y123.758 E2.54830 ; perimeter
G1 X162.322 Y118.154 E0.35913 ; perimeter
G1 X173.424 Y131.385 E0.71152 ; perimeter
G1 X170.103 Y134.171 E0.17858 ; perimeter
G1 X124.775 Y134.171 E1.86735 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.521 Y134.521 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y134.171 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.850 F10800.000 ; lift Z
G1 X163.762 Y118.420 ; move to first perimeter point
G1 Z3.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X162.781 Y117.251 E0.06285 ; perimeter
G1 X164.215 Y116.048 E0.07712 ; perimeter
G1 X166.589 Y116.048 E0.09777 ; perimeter
G1 X163.808 Y118.382 E0.14955 ; perimeter
M204 S1000 ; adjust acceleration
G1 X163.810 Y117.862 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X163.339 Y117.300 E0.03019 ; perimeter
G1 X164.359 Y116.444 E0.05485 ; perimeter
G1 X165.500 Y116.444 E0.04697 ; perimeter
G1 X163.856 Y117.823 E0.08836 ; perimeter
M204 S1000 ; adjust acceleration
G1 X163.551 Y118.166 F10800.000 ; move inwards before travel
G1 F8640
G1 X163.339 Y117.300 E-0.16979 ; wipe and retract
G1 X164.359 Y116.444 E-0.30746 ; wipe and retract
G1 X165.500 Y116.444 E-0.26327 ; wipe and retract
G1 X165.435 Y116.499 E-0.01949 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.850 F10800.000 ; lift Z
G1 X174.393 Y131.090 ; move to first perimeter point
G1 Z3.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X171.126 Y127.197 E0.20934 ; perimeter
G1 X174.045 Y124.748 E0.15696 ; perimeter
G1 X173.701 Y124.338 E0.02205 ; perimeter
G1 X170.782 Y126.787 E0.15696 ; perimeter
G1 X164.106 Y118.830 E0.42789 ; perimeter
G1 X167.421 Y116.048 E0.17830 ; perimeter
G1 X169.352 Y116.048 E0.07954 ; perimeter
G1 X183.214 Y104.416 E0.74547 ; perimeter
G1 X185.338 Y106.947 E0.13609 ; perimeter
G1 X182.522 Y109.310 E0.15141 ; perimeter
G1 X182.866 Y109.720 E0.02205 ; perimeter
G1 X185.682 Y107.357 E0.15141 ; perimeter
G1 X189.093 Y111.422 E0.21861 ; perimeter
G1 X186.277 Y113.785 E0.15141 ; perimeter
G1 X186.622 Y114.195 E0.02205 ; perimeter
G1 X189.437 Y111.832 E0.15141 ; perimeter
G1 X192.703 Y115.725 E0.20934 ; perimeter
G1 X174.439 Y131.051 E0.98223 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.441 Y130.531 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.685 Y127.246 E0.17668 ; perimeter
G1 X174.603 Y124.797 E0.15696 ; perimeter
G1 X173.750 Y123.779 E0.05471 ; perimeter
G1 X170.831 Y126.229 E0.15696 ; perimeter
G1 X164.664 Y118.879 E0.39523 ; perimeter
G1 X167.566 Y116.444 E0.15603 ; perimeter
G1 X169.496 Y116.444 E0.07954 ; perimeter
G1 X183.165 Y104.975 E0.73508 ; perimeter
G1 X184.779 Y106.898 E0.10344 ; perimeter
G1 X181.964 Y109.261 E0.15141 ; perimeter
G1 X182.818 Y110.278 E0.05471 ; perimeter
G1 X185.633 Y107.915 E0.15141 ; perimeter
G1 X188.535 Y111.373 E0.18596 ; perimeter
G1 X185.719 Y113.736 E0.15141 ; perimeter
G1 X186.573 Y114.753 E0.05471 ; perimeter
G1 X189.388 Y112.391 E0.15141 ; perimeter
G1 X192.145 Y115.676 E0.17668 ; perimeter
G1 X174.487 Y130.493 E0.94958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.151 Y130.807 F10800.000 ; move inwards before travel
G1 F8640
G1 X172.337 Y128.001 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.850 F10800.000 ; lift Z
G1 X124.715 Y135.088 ; move to first perimeter point
G1 Z3.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.993 Y135.088 E1.88356 ; perimeter
G1 X56.188 Y115.952 E1.22637 ; perimeter
G1 X56.268 Y115.858 E0.00510 ; perimeter
G1 X79.038 Y134.964 E1.22452 ; perimeter
G1 X95.191 Y134.964 E0.66543 ; perimeter
G1 X170.392 Y134.964 E3.09798 ; perimeter
G1 X193.162 Y115.858 E1.22452 ; perimeter
M73 P20 R109
G1 X193.242 Y115.952 E0.00510 ; perimeter
G1 X170.437 Y135.088 E1.22637 ; perimeter
G1 X124.775 Y135.088 E1.88109 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y135.088 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.850 F10800.000 ; lift Z
G1 X85.668 Y118.420 ; move to first perimeter point
G1 Z3.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X82.841 Y116.048 E0.15202 ; perimeter
G1 X85.215 Y116.048 E0.09777 ; perimeter
G1 X86.649 Y117.251 E0.07712 ; perimeter
G1 X85.707 Y118.374 E0.06038 ; perimeter
M204 S1000 ; adjust acceleration
G1 X85.619 Y117.862 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X83.930 Y116.444 E0.09083 ; perimeter
G1 X85.070 Y116.444 E0.04697 ; perimeter
G1 X86.090 Y117.300 E0.05485 ; perimeter
G1 X85.658 Y117.816 E0.02772 ; perimeter
M204 S1000 ; adjust acceleration
G1 X85.485 Y118.239 F10800.000 ; move inwards before travel
G1 F8640
G1 X83.930 Y116.444 E-0.50932 ; wipe and retract
G1 X85.016 Y116.444 E-0.25068 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.850 F10800.000 ; lift Z
G1 X124.715 Y122.965 ; move to first perimeter point
G1 Z3.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.074 Y122.965 E1.26226 ; perimeter
G1 X85.359 Y115.652 E0.46869 ; perimeter
G1 X80.222 Y115.652 E0.21162 ; perimeter
G1 X66.266 Y103.942 E0.75049 ; perimeter
G1 X66.346 Y103.847 E0.00510 ; perimeter
G1 X80.267 Y115.528 E0.74864 ; perimeter
G1 X85.404 Y115.528 E0.21162 ; perimeter
G1 X94.119 Y122.841 E0.46869 ; perimeter
G1 X155.310 Y122.841 E2.52081 ; perimeter
G1 X164.026 Y115.528 E0.46869 ; perimeter
G1 X169.163 Y115.528 E0.21162 ; perimeter
G1 X183.084 Y103.847 E0.74864 ; perimeter
G1 X183.163 Y103.942 E0.00510 ; perimeter
G1 X169.208 Y115.652 E0.75049 ; perimeter
G1 X164.071 Y115.652 E0.21162 ; perimeter
G1 X155.355 Y122.965 E0.46869 ; perimeter
G1 X124.775 Y122.965 E1.25979 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y122.965 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.850 F10800.000 ; lift Z
G1 X75.037 Y131.090 ; move to first perimeter point
G1 Z3.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X56.726 Y115.725 E0.98471 ; perimeter
G1 X59.993 Y111.832 E0.20934 ; perimeter
G1 X62.808 Y114.195 E0.15141 ; perimeter
G1 X63.152 Y113.785 E0.02205 ; perimeter
G1 X60.337 Y111.422 E0.15141 ; perimeter
G1 X63.748 Y107.357 E0.21861 ; perimeter
G1 X66.563 Y109.720 E0.15141 ; perimeter
G1 X66.907 Y109.310 E0.02205 ; perimeter
G1 X64.092 Y106.947 E0.15141 ; perimeter
G1 X66.215 Y104.416 E0.13609 ; perimeter
G1 X80.078 Y116.048 E0.74547 ; perimeter
G1 X82.008 Y116.048 E0.07954 ; perimeter
G1 X85.324 Y118.830 E0.17830 ; perimeter
G1 X78.648 Y126.787 E0.42789 ; perimeter
G1 X75.729 Y124.338 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.076 Y131.044 E0.20687 ; perimeter
M204 S1000 ; adjust acceleration
G1 X74.988 Y130.531 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X57.285 Y115.676 E0.95205 ; perimeter
G1 X60.041 Y112.391 E0.17668 ; perimeter
G1 X62.857 Y114.753 E0.15141 ; perimeter
G1 X63.711 Y113.736 E0.05471 ; perimeter
G1 X60.895 Y111.373 E0.15141 ; perimeter
G1 X63.797 Y107.915 E0.18596 ; perimeter
G1 X66.612 Y110.278 E0.15141 ; perimeter
G1 X67.466 Y109.261 E0.05471 ; perimeter
G1 X64.650 Y106.898 E0.15141 ; perimeter
G1 X66.264 Y104.975 E0.10344 ; perimeter
G1 X79.933 Y116.444 E0.73508 ; perimeter
G1 X81.864 Y116.444 E0.07954 ; perimeter
G1 X84.766 Y118.879 E0.15603 ; perimeter
G1 X78.599 Y126.229 E0.39523 ; perimeter
G1 X75.680 Y123.779 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.027 Y130.485 E0.17421 ; perimeter
M204 S1000 ; adjust acceleration
G1 X74.812 Y130.890 F10800.000 ; move inwards before travel
G1 F8640
G1 X72.500 Y128.376 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.850 F10800.000 ; lift Z
G1 X124.715 Y135.484 ; move to first perimeter point
G1 Z3.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.848 Y135.484 E1.88950 ; perimeter
G1 X55.629 Y116.001 E1.24864 ; perimeter
G1 X66.297 Y103.288 E0.68367 ; perimeter
G1 X80.411 Y115.132 E0.75902 ; perimeter
G1 X85.548 Y115.132 E0.21162 ; perimeter
G1 X94.264 Y122.445 E0.46869 ; perimeter
G1 X155.166 Y122.445 E2.50893 ; perimeter
G1 X163.882 Y115.132 E0.46869 ; perimeter
G1 X169.019 Y115.132 E0.21162 ; perimeter
G1 X183.133 Y103.288 E0.75902 ; perimeter
G1 X193.800 Y116.001 E0.68367 ; perimeter
G1 X170.581 Y135.484 E1.24864 ; perimeter
G1 X124.775 Y135.484 E1.88703 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y135.881 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.704 Y135.881 E1.89545 ; perimeter
G1 X55.071 Y116.050 E1.27091 ; perimeter
G1 X66.248 Y102.730 E0.71632 ; perimeter
G1 X80.555 Y114.735 E0.76941 ; perimeter
G1 X85.692 Y114.735 E0.21162 ; perimeter
G1 X94.408 Y122.048 E0.46869 ; perimeter
G1 X155.022 Y122.048 E2.49704 ; perimeter
G1 X163.737 Y114.735 E0.46869 ; perimeter
G1 X168.874 Y114.735 E0.21162 ; perimeter
G1 X183.182 Y102.730 E0.76941 ; perimeter
G1 X194.359 Y116.050 E0.71632 ; perimeter
G1 X170.726 Y135.881 E1.27091 ; perimeter
G1 X124.775 Y135.881 E1.89298 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.484 Y135.554 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;3.5


G1 F8640
G1 X121.483 Y135.881 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z3.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;3.5
G1 X125.000 Y96.597 ; move to first perimeter point
G1 Z3.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.403 Y96.597 E1.87839 ; perimeter
G1 X56.765 Y77.600 E1.21744 ; perimeter
G1 X60.144 Y73.574 E0.21655 ; perimeter
G1 X62.954 Y75.932 E0.15114 ; perimeter
G1 X63.298 Y75.522 E0.02205 ; perimeter
G1 X60.488 Y73.164 E0.15114 ; perimeter
G1 X63.899 Y69.098 E0.21861 ; perimeter
G1 X66.709 Y71.457 E0.15114 ; perimeter
G1 X67.053 Y71.047 E0.02205 ; perimeter
G1 X64.243 Y68.688 E0.15114 ; perimeter
G1 X66.479 Y66.024 E0.14330 ; perimeter
G1 X80.426 Y77.727 E0.75006 ; perimeter
G1 X82.085 Y77.727 E0.06832 ; perimeter
G1 X85.609 Y80.684 E0.18952 ; perimeter
G1 X78.933 Y88.641 E0.42789 ; perimeter
G1 X76.014 Y86.192 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.140 Y91.969 E0.15696 ; perimeter
G1 X76.550 Y92.314 E0.02205 ; perimeter
G1 X87.456 Y79.315 E0.69901 ; perimeter
G1 X94.279 Y85.040 E0.36689 ; perimeter
G1 X151.164 Y85.040 E2.34343 ; perimeter
G1 X155.721 Y85.040 E0.18774 ; perimeter
G1 X162.544 Y79.315 E0.36689 ; perimeter
G1 X173.450 Y92.314 E0.69901 ; perimeter
G1 X173.860 Y91.969 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.15696 ; perimeter
G1 X173.986 Y86.192 E0.02205 ; perimeter
G1 X171.067 Y88.641 E0.15696 ; perimeter
G1 X164.391 Y80.684 E0.42789 ; perimeter
G1 X167.915 Y77.727 E0.18952 ; perimeter
G1 X169.574 Y77.727 E0.06832 ; perimeter
G1 X183.521 Y66.024 E0.75006 ; perimeter
G1 X185.757 Y68.688 E0.14330 ; perimeter
G1 X182.947 Y71.047 E0.15114 ; perimeter
G1 X183.291 Y71.457 E0.02205 ; perimeter
G1 X186.101 Y69.098 E0.15114 ; perimeter
G1 X189.512 Y73.164 E0.21861 ; perimeter
G1 X186.702 Y75.522 E0.15114 ; perimeter
G1 X187.046 Y75.932 E0.02205 ; perimeter
G1 X189.856 Y73.574 E0.15114 ; perimeter
G1 X193.235 Y77.600 E0.21655 ; perimeter
G1 X170.597 Y96.597 E1.21744 ; perimeter
G1 X125.060 Y96.597 E1.87591 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y96.200 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.548 Y96.200 E1.87244 ; perimeter
G1 X57.323 Y77.552 E1.19517 ; perimeter
G1 X60.193 Y74.132 E0.18390 ; perimeter
G1 X63.003 Y76.490 E0.15114 ; perimeter
G1 X63.857 Y75.473 E0.05471 ; perimeter
G1 X61.046 Y73.115 E0.15114 ; perimeter
G1 X63.948 Y69.657 E0.18596 ; perimeter
G1 X66.758 Y72.015 E0.15114 ; perimeter
G1 X67.612 Y70.998 E0.05471 ; perimeter
G1 X64.801 Y68.640 E0.15114 ; perimeter
G1 X66.528 Y66.582 E0.11065 ; perimeter
G1 X80.282 Y78.123 E0.73967 ; perimeter
G1 X81.941 Y78.123 E0.06832 ; perimeter
G1 X85.051 Y80.733 E0.16725 ; perimeter
G1 X78.884 Y88.082 E0.39523 ; perimeter
G1 X75.965 Y85.633 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.581 Y92.018 E0.15696 ; perimeter
G1 X76.599 Y92.872 E0.05471 ; perimeter
G1 X87.505 Y79.874 E0.69901 ; perimeter
G1 X94.135 Y85.436 E0.35650 ; perimeter
G1 X151.164 Y85.436 E2.34937 ; perimeter
G1 X155.865 Y85.436 E0.19368 ; perimeter
G1 X162.495 Y79.874 E0.35650 ; perimeter
G1 X173.401 Y92.872 E0.69901 ; perimeter
G1 X174.419 Y92.018 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.15696 ; perimeter
G1 X174.035 Y85.633 E0.05471 ; perimeter
G1 X171.116 Y88.082 E0.15696 ; perimeter
G1 X164.949 Y80.733 E0.39523 ; perimeter
G1 X168.059 Y78.123 E0.16725 ; perimeter
G1 X169.718 Y78.123 E0.06832 ; perimeter
G1 X183.472 Y66.582 E0.73967 ; perimeter
G1 X185.199 Y68.640 E0.11065 ; perimeter
G1 X182.388 Y70.998 E0.15114 ; perimeter
G1 X183.242 Y72.015 E0.05471 ; perimeter
G1 X186.052 Y69.657 E0.15114 ; perimeter
G1 X188.954 Y73.115 E0.18596 ; perimeter
G1 X186.143 Y75.473 E0.15114 ; perimeter
G1 X186.997 Y76.490 E0.05471 ; perimeter
G1 X189.807 Y74.132 E0.15114 ; perimeter
G1 X192.677 Y77.552 E0.18390 ; perimeter
G1 X170.452 Y96.200 E1.19517 ; perimeter
G1 X125.060 Y96.200 E1.86997 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.832 Y96.563 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y96.200 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.100 F10800.000 ; lift Z
G1 X125.000 Y84.644 ; move to first perimeter point
G1 Z3.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q20 S110
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.423 Y84.644 E1.25964 ; perimeter
G1 X85.708 Y77.331 E0.46869 ; perimeter
G1 X80.571 Y77.331 E0.21162 ; perimeter
G1 X66.533 Y65.552 E0.75489 ; perimeter
G1 X66.613 Y65.457 E0.00510 ; perimeter
G1 X80.616 Y77.207 E0.75303 ; perimeter
G1 X85.753 Y77.207 E0.21162 ; perimeter
G1 X94.468 Y84.520 E0.46869 ; perimeter
G1 X155.532 Y84.520 E2.51557 ; perimeter
G1 X164.247 Y77.207 E0.46869 ; perimeter
G1 X169.384 Y77.207 E0.21162 ; perimeter
G1 X183.390 Y65.454 E0.75321 ; perimeter
G1 X183.470 Y65.549 E0.00510 ; perimeter
G1 X169.429 Y77.331 E0.75507 ; perimeter
G1 X164.292 Y77.331 E0.21162 ; perimeter
G1 X155.577 Y84.644 E0.46869 ; perimeter
G1 X125.060 Y84.644 E1.25717 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y84.644 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.100 F10800.000 ; lift Z
G1 X125.000 Y97.117 ; move to first perimeter point
G1 Z3.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.214 Y97.117 E1.88619 ; perimeter
G1 X56.230 Y77.831 E1.23602 ; perimeter
G1 X56.310 Y77.736 E0.00510 ; perimeter
G1 X79.259 Y96.993 E1.23416 ; perimeter
G1 X170.741 Y96.993 E3.76866 ; perimeter
G1 X193.691 Y77.736 E1.23417 ; perimeter
G1 X193.770 Y77.831 E0.00510 ; perimeter
G1 X170.786 Y97.117 E1.23603 ; perimeter
G1 X125.060 Y97.117 E1.88371 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y97.117 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.100 F10800.000 ; lift Z
G1 X164.047 Y80.274 ; move to first perimeter point
G1 Z3.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X162.954 Y78.971 E0.07006 ; perimeter
G1 X164.437 Y77.727 E0.07975 ; perimeter
G1 X167.082 Y77.727 E0.10899 ; perimeter
G1 X164.093 Y80.235 E0.16077 ; perimeter
M204 S1000 ; adjust acceleration
G1 X164.096 Y79.716 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X163.512 Y79.020 E0.03740 ; perimeter
G1 X164.581 Y78.123 E0.05748 ; perimeter
G1 X165.993 Y78.123 E0.05819 ; perimeter
G1 X164.142 Y79.677 E0.09958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X163.844 Y80.027 F10800.000 ; move inwards before travel
G1 F8640
G1 X163.512 Y79.020 E-0.21010 ; wipe and retract
G1 X164.581 Y78.123 E-0.32217 ; wipe and retract
G1 X165.567 Y78.123 E-0.22773 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.100 F10800.000 ; lift Z
G1 X85.953 Y80.274 ; move to first perimeter point
G1 Z3.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X82.918 Y77.727 E0.16324 ; perimeter
G1 X85.563 Y77.727 E0.10899 ; perimeter
G1 X87.046 Y78.971 E0.07975 ; perimeter
G1 X85.992 Y80.228 E0.06759 ; perimeter
M204 S1000 ; adjust acceleration
G1 X85.904 Y79.716 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X84.007 Y78.123 E0.10205 ; perimeter
G1 X85.419 Y78.123 E0.05819 ; perimeter
G1 X86.488 Y79.020 E0.05748 ; perimeter
G1 X85.943 Y79.670 E0.03493 ; perimeter
M204 S1000 ; adjust acceleration
G1 X85.761 Y80.089 F10800.000 ; move inwards before travel
G1 F8640
G1 X84.007 Y78.123 E-0.57218 ; wipe and retract
G1 X84.820 Y78.123 E-0.18782 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.100 F10800.000 ; lift Z
G1 X125.000 Y97.513 ; move to first perimeter point
G1 Z3.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.070 Y97.513 E1.89213 ; perimeter
G1 X55.672 Y77.880 E1.25829 ; perimeter
G1 X66.564 Y64.899 E0.69809 ; perimeter
G1 X80.760 Y76.810 E0.76342 ; perimeter
G1 X85.897 Y76.810 E0.21162 ; perimeter
G1 X94.612 Y84.123 E0.46869 ; perimeter
G1 X155.388 Y84.123 E2.50368 ; perimeter
G1 X164.103 Y76.810 E0.46869 ; perimeter
G1 X169.240 Y76.810 E0.21162 ; perimeter
G1 X183.439 Y64.896 E0.76360 ; perimeter
G1 X194.329 Y77.880 E0.69809 ; perimeter
M73 P20 R108
G1 X170.930 Y97.513 E1.25830 ; perimeter
G1 X125.060 Y97.513 E1.88966 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y97.909 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.926 Y97.909 E1.89807 ; perimeter
G1 X55.113 Y77.929 E1.28056 ; perimeter
G1 X66.515 Y64.340 E0.73075 ; perimeter
G1 X80.904 Y76.414 E0.77380 ; perimeter
G1 X86.041 Y76.414 E0.21162 ; perimeter
G1 X94.757 Y83.727 E0.46869 ; perimeter
G1 X155.243 Y83.727 E2.49179 ; perimeter
G1 X163.959 Y76.414 E0.46869 ; perimeter
G1 X169.096 Y76.414 E0.21162 ; perimeter
G1 X183.488 Y64.337 E0.77399 ; perimeter
G1 X194.887 Y77.929 E0.73075 ; perimeter
G1 X171.074 Y97.909 E1.28056 ; perimeter
G1 X125.060 Y97.909 E1.89560 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.769 Y97.583 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y97.909 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.100 F10800.000 ; lift Z
G1 X124.715 Y134.743 ; move to first perimeter point
G1 Z3.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.118 Y134.743 E1.87839 ; perimeter
G1 X56.480 Y115.747 E1.21744 ; perimeter
G1 X59.858 Y111.720 E0.21655 ; perimeter
G1 X62.669 Y114.078 E0.15114 ; perimeter
G1 X63.013 Y113.668 E0.02205 ; perimeter
G1 X60.203 Y111.310 E0.15114 ; perimeter
G1 X63.614 Y107.245 E0.21861 ; perimeter
G1 X66.424 Y109.603 E0.15114 ; perimeter
G1 X66.768 Y109.193 E0.02205 ; perimeter
G1 X63.958 Y106.835 E0.15114 ; perimeter
G1 X66.194 Y104.170 E0.14330 ; perimeter
G1 X80.141 Y115.873 E0.75006 ; perimeter
G1 X81.800 Y115.873 E0.06832 ; perimeter
G1 X85.324 Y118.830 E0.18952 ; perimeter
G1 X78.648 Y126.787 E0.42789 ; perimeter
G1 X75.729 Y124.338 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.854 Y130.116 E0.15696 ; perimeter
G1 X76.264 Y130.460 E0.02205 ; perimeter
G1 X87.171 Y117.461 E0.69901 ; perimeter
G1 X93.994 Y123.186 E0.36689 ; perimeter
G1 X150.879 Y123.186 E2.34343 ; perimeter
G1 X155.436 Y123.186 E0.18774 ; perimeter
G1 X162.258 Y117.461 E0.36689 ; perimeter
G1 X173.165 Y130.460 E0.69901 ; perimeter
G1 X173.575 Y130.116 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.15696 ; perimeter
G1 X173.701 Y124.338 E0.02205 ; perimeter
G1 X170.782 Y126.787 E0.15696 ; perimeter
G1 X164.106 Y118.830 E0.42789 ; perimeter
G1 X167.630 Y115.873 E0.18952 ; perimeter
G1 X169.288 Y115.873 E0.06832 ; perimeter
G1 X183.236 Y104.170 E0.75006 ; perimeter
G1 X185.472 Y106.835 E0.14330 ; perimeter
G1 X182.661 Y109.193 E0.15114 ; perimeter
G1 X183.006 Y109.603 E0.02205 ; perimeter
G1 X185.816 Y107.245 E0.15114 ; perimeter
G1 X189.227 Y111.310 E0.21861 ; perimeter
G1 X186.417 Y113.668 E0.15114 ; perimeter
G1 X186.761 Y114.078 E0.02205 ; perimeter
G1 X189.571 Y111.720 E0.15114 ; perimeter
G1 X192.950 Y115.747 E0.21655 ; perimeter
G1 X170.311 Y134.743 E1.21744 ; perimeter
G1 X124.775 Y134.743 E1.87591 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y134.346 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.262 Y134.346 E1.87244 ; perimeter
G1 X57.038 Y115.698 E1.19517 ; perimeter
G1 X59.907 Y112.278 E0.18390 ; perimeter
G1 X62.718 Y114.636 E0.15114 ; perimeter
G1 X63.571 Y113.619 E0.05471 ; perimeter
G1 X60.761 Y111.261 E0.15114 ; perimeter
G1 X63.663 Y107.803 E0.18596 ; perimeter
G1 X66.473 Y110.161 E0.15114 ; perimeter
G1 X67.327 Y109.144 E0.05471 ; perimeter
G1 X64.516 Y106.786 E0.15114 ; perimeter
G1 X66.243 Y104.728 E0.11065 ; perimeter
G1 X79.997 Y116.269 E0.73967 ; perimeter
G1 X81.655 Y116.269 E0.06832 ; perimeter
G1 X84.766 Y118.879 E0.16725 ; perimeter
G1 X78.599 Y126.229 E0.39523 ; perimeter
G1 X75.680 Y123.779 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.296 Y130.164 E0.15696 ; perimeter
G1 X76.313 Y131.018 E0.05471 ; perimeter
G1 X87.220 Y118.020 E0.69901 ; perimeter
G1 X93.849 Y123.582 E0.35650 ; perimeter
G1 X150.879 Y123.582 E2.34937 ; perimeter
G1 X155.580 Y123.582 E0.19368 ; perimeter
G1 X162.210 Y118.020 E0.35650 ; perimeter
G1 X173.116 Y131.018 E0.69901 ; perimeter
G1 X174.134 Y130.164 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.15696 ; perimeter
G1 X173.750 Y123.779 E0.05471 ; perimeter
G1 X170.831 Y126.229 E0.15696 ; perimeter
G1 X164.664 Y118.879 E0.39523 ; perimeter
G1 X167.774 Y116.269 E0.16725 ; perimeter
G1 X169.433 Y116.269 E0.06832 ; perimeter
G1 X183.187 Y104.728 E0.73967 ; perimeter
G1 X184.914 Y106.786 E0.11065 ; perimeter
G1 X182.103 Y109.144 E0.15114 ; perimeter
G1 X182.957 Y110.161 E0.05471 ; perimeter
G1 X185.767 Y107.803 E0.15114 ; perimeter
G1 X188.669 Y111.261 E0.18596 ; perimeter
G1 X185.858 Y113.619 E0.15114 ; perimeter
G1 X186.712 Y114.636 E0.05471 ; perimeter
G1 X189.522 Y112.278 E0.15114 ; perimeter
G1 X192.392 Y115.698 E0.18390 ; perimeter
G1 X170.167 Y134.346 E1.19517 ; perimeter
G1 X124.775 Y134.346 E1.86997 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.547 Y134.709 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y134.346 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.100 F10800.000 ; lift Z
G1 X124.715 Y122.790 ; move to first perimeter point
G1 Z3.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.138 Y122.790 E1.25964 ; perimeter
G1 X85.422 Y115.477 E0.46869 ; perimeter
G1 X80.285 Y115.477 E0.21162 ; perimeter
G1 X66.248 Y103.698 E0.75489 ; perimeter
G1 X66.328 Y103.603 E0.00510 ; perimeter
G1 X80.331 Y115.353 E0.75303 ; perimeter
G1 X85.468 Y115.353 E0.21162 ; perimeter
G1 X94.183 Y122.666 E0.46869 ; perimeter
G1 X155.247 Y122.666 E2.51557 ; perimeter
G1 X163.962 Y115.353 E0.46869 ; perimeter
G1 X169.099 Y115.353 E0.21162 ; perimeter
G1 X183.105 Y103.600 E0.75321 ; perimeter
G1 X183.185 Y103.695 E0.00510 ; perimeter
G1 X169.144 Y115.477 E0.75507 ; perimeter
G1 X164.007 Y115.477 E0.21162 ; perimeter
G1 X155.292 Y122.790 E0.46869 ; perimeter
G1 X124.775 Y122.790 E1.25717 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y122.790 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.100 F10800.000 ; lift Z
G1 X124.715 Y135.263 ; move to first perimeter point
G1 Z3.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.929 Y135.263 E1.88619 ; perimeter
G1 X55.945 Y115.977 E1.23602 ; perimeter
G1 X56.024 Y115.882 E0.00510 ; perimeter
G1 X78.974 Y135.139 E1.23416 ; perimeter
G1 X170.456 Y135.139 E3.76866 ; perimeter
G1 X193.405 Y115.882 E1.23417 ; perimeter
G1 X193.485 Y115.977 E0.00510 ; perimeter
G1 X170.501 Y135.263 E1.23603 ; perimeter
G1 X124.775 Y135.263 E1.88371 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y135.263 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.100 F10800.000 ; lift Z
G1 X163.762 Y118.420 ; move to first perimeter point
G1 Z3.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X162.668 Y117.117 E0.07006 ; perimeter
G1 X164.151 Y115.873 E0.07975 ; perimeter
G1 X166.797 Y115.873 E0.10899 ; perimeter
G1 X163.808 Y118.382 E0.16077 ; perimeter
M204 S1000 ; adjust acceleration
G1 X163.810 Y117.862 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X163.227 Y117.166 E0.03740 ; perimeter
G1 X164.296 Y116.269 E0.05748 ; perimeter
G1 X165.708 Y116.269 E0.05819 ; perimeter
G1 X163.856 Y117.823 E0.09958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X163.559 Y118.173 F10800.000 ; move inwards before travel
G1 F8640
G1 X163.227 Y117.166 E-0.21010 ; wipe and retract
G1 X164.296 Y116.269 E-0.32217 ; wipe and retract
G1 X165.282 Y116.269 E-0.22773 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.100 F10800.000 ; lift Z
G1 X85.668 Y118.420 ; move to first perimeter point
G1 Z3.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X82.633 Y115.873 E0.16324 ; perimeter
G1 X85.278 Y115.873 E0.10899 ; perimeter
G1 X86.761 Y117.117 E0.07975 ; perimeter
G1 X85.707 Y118.374 E0.06759 ; perimeter
M204 S1000 ; adjust acceleration
G1 X85.619 Y117.862 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X83.721 Y116.269 E0.10205 ; perimeter
G1 X85.134 Y116.269 E0.05819 ; perimeter
G1 X86.203 Y117.166 E0.05748 ; perimeter
G1 X85.658 Y117.816 E0.03493 ; perimeter
M204 S1000 ; adjust acceleration
G1 X85.476 Y118.235 F10800.000 ; move inwards before travel
G1 F8640
G1 X83.721 Y116.269 E-0.57218 ; wipe and retract
G1 X84.535 Y116.269 E-0.18782 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.100 F10800.000 ; lift Z
G1 X124.715 Y135.659 ; move to first perimeter point
G1 Z3.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.785 Y135.659 E1.89213 ; perimeter
G1 X55.386 Y116.026 E1.25829 ; perimeter
G1 X66.279 Y103.045 E0.69809 ; perimeter
G1 X80.475 Y114.956 E0.76342 ; perimeter
G1 X85.612 Y114.956 E0.21162 ; perimeter
G1 X94.327 Y122.270 E0.46869 ; perimeter
G1 X155.102 Y122.270 E2.50368 ; perimeter
G1 X163.818 Y114.956 E0.46869 ; perimeter
G1 X168.955 Y114.956 E0.21162 ; perimeter
G1 X183.154 Y103.042 E0.76360 ; perimeter
M73 Q21 S109
G1 X194.043 Y116.026 E0.69809 ; perimeter
G1 X170.645 Y135.659 E1.25830 ; perimeter
G1 X124.775 Y135.659 E1.88966 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y136.056 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.640 Y136.056 E1.89807 ; perimeter
G1 X54.828 Y116.075 E1.28056 ; perimeter
G1 X66.230 Y102.486 E0.73075 ; perimeter
G1 X80.619 Y114.560 E0.77380 ; perimeter
G1 X85.756 Y114.560 E0.21162 ; perimeter
G1 X94.471 Y121.873 E0.46869 ; perimeter
G1 X154.958 Y121.873 E2.49179 ; perimeter
G1 X163.674 Y114.560 E0.46869 ; perimeter
G1 X168.811 Y114.560 E0.21162 ; perimeter
G1 X183.203 Y102.483 E0.77399 ; perimeter
G1 X194.602 Y116.075 E0.73075 ; perimeter
G1 X170.789 Y136.056 E1.28056 ; perimeter
G1 X124.775 Y136.056 E1.89560 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.484 Y135.729 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;3.75


G1 F8640
G1 X121.483 Y136.056 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;3.75
G1 X125.000 Y96.772 ; move to first perimeter point
G1 Z3.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.340 Y96.772 E1.88101 ; perimeter
G1 X56.518 Y77.622 E1.22728 ; perimeter
G1 X60.010 Y73.461 E0.22376 ; perimeter
G1 X62.815 Y75.815 E0.15087 ; perimeter
G1 X63.159 Y75.405 E0.02205 ; perimeter
G1 X60.354 Y73.051 E0.15087 ; perimeter
G1 X63.765 Y68.986 E0.21861 ; perimeter
G1 X66.570 Y71.340 E0.15087 ; perimeter
G1 X66.914 Y70.930 E0.02205 ; perimeter
G1 X64.109 Y68.576 E0.15087 ; perimeter
G1 X66.457 Y65.777 E0.15052 ; perimeter
G1 X80.490 Y77.552 E0.75464 ; perimeter
G1 X85.627 Y77.552 E0.21162 ; perimeter
G1 X87.159 Y78.837 E0.08237 ; perimeter
G1 X85.953 Y80.274 E0.07727 ; perimeter
G1 X83.035 Y77.825 E0.15696 ; perimeter
G1 X82.691 Y78.235 E0.02205 ; perimeter
G1 X85.609 Y80.684 E0.15696 ; perimeter
G1 X78.933 Y88.641 E0.42789 ; perimeter
G1 X76.014 Y86.192 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.140 Y91.969 E0.15696 ; perimeter
G1 X76.550 Y92.314 E0.02205 ; perimeter
G1 X87.569 Y79.181 E0.70622 ; perimeter
G1 X94.343 Y84.865 E0.36426 ; perimeter
G1 X150.532 Y84.865 E2.31477 ; perimeter
G1 X155.657 Y84.865 E0.21114 ; perimeter
G1 X162.431 Y79.181 E0.36426 ; perimeter
G1 X173.450 Y92.314 E0.70622 ; perimeter
G1 X173.860 Y91.969 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.15696 ; perimeter
G1 X173.986 Y86.192 E0.02205 ; perimeter
G1 X171.067 Y88.641 E0.15696 ; perimeter
G1 X164.391 Y80.684 E0.42789 ; perimeter
G1 X167.309 Y78.235 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X162.841 Y78.837 E0.07727 ; perimeter
G1 X164.373 Y77.552 E0.08237 ; perimeter
G1 X169.510 Y77.552 E0.21162 ; perimeter
G1 X183.543 Y65.777 E0.75464 ; perimeter
G1 X185.891 Y68.576 E0.15052 ; perimeter
G1 X183.086 Y70.930 E0.15087 ; perimeter
G1 X183.430 Y71.340 E0.02205 ; perimeter
G1 X186.235 Y68.986 E0.15087 ; perimeter
G1 X189.646 Y73.051 E0.21861 ; perimeter
G1 X186.841 Y75.405 E0.15087 ; perimeter
G1 X187.185 Y75.815 E0.02205 ; perimeter
G1 X189.990 Y73.461 E0.15087 ; perimeter
G1 X193.482 Y77.622 E0.22376 ; perimeter
G1 X170.660 Y96.772 E1.22728 ; perimeter
G1 X125.060 Y96.772 E1.87854 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y96.375 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.484 Y96.375 E1.87507 ; perimeter
G1 X57.077 Y77.573 E1.20501 ; perimeter
M73 P21 R107
G1 X60.058 Y74.020 E0.19111 ; perimeter
G1 X62.864 Y76.374 E0.15087 ; perimeter
G1 X63.717 Y75.356 E0.05471 ; perimeter
G1 X60.912 Y73.002 E0.15087 ; perimeter
G1 X63.814 Y69.544 E0.18596 ; perimeter
G1 X66.619 Y71.898 E0.15087 ; perimeter
G1 X67.473 Y70.881 E0.05471 ; perimeter
G1 X64.667 Y68.527 E0.15087 ; perimeter
G1 X66.506 Y66.335 E0.11786 ; perimeter
G1 X80.346 Y77.948 E0.74426 ; perimeter
G1 X82.414 Y77.948 E0.08519 ; perimeter
G1 X82.132 Y78.284 E0.01805 ; perimeter
G1 X85.051 Y80.733 E0.15696 ; perimeter
G1 X78.884 Y88.082 E0.39523 ; perimeter
G1 X75.965 Y85.633 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.581 Y92.018 E0.15696 ; perimeter
G1 X76.599 Y92.872 E0.05471 ; perimeter
G1 X87.618 Y79.740 E0.70622 ; perimeter
G1 X94.198 Y85.261 E0.35388 ; perimeter
G1 X150.532 Y85.261 E2.32072 ; perimeter
G1 X155.802 Y85.261 E0.21708 ; perimeter
G1 X162.382 Y79.740 E0.35388 ; perimeter
G1 X173.401 Y92.872 E0.70622 ; perimeter
G1 X174.419 Y92.018 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.15696 ; perimeter
G1 X174.035 Y85.633 E0.05471 ; perimeter
G1 X171.116 Y88.082 E0.15696 ; perimeter
G1 X164.949 Y80.733 E0.39523 ; perimeter
G1 X167.868 Y78.284 E0.15696 ; perimeter
G1 X167.586 Y77.948 E0.01805 ; perimeter
G1 X169.654 Y77.948 E0.08519 ; perimeter
G1 X183.494 Y66.335 E0.74426 ; perimeter
G1 X185.333 Y68.527 E0.11786 ; perimeter
G1 X182.527 Y70.881 E0.15087 ; perimeter
G1 X183.381 Y71.898 E0.05471 ; perimeter
G1 X186.186 Y69.544 E0.15087 ; perimeter
G1 X189.088 Y73.002 E0.18596 ; perimeter
G1 X186.283 Y75.356 E0.15087 ; perimeter
G1 X187.136 Y76.374 E0.05471 ; perimeter
G1 X189.942 Y74.020 E0.15087 ; perimeter
G1 X192.923 Y77.573 E0.19111 ; perimeter
G1 X170.516 Y96.375 E1.20501 ; perimeter
G1 X125.060 Y96.375 E1.87260 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.832 Y96.738 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y96.375 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.350 F10800.000 ; lift Z
G1 X164.096 Y79.716 ; move to first perimeter point
G1 Z3.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X163.399 Y78.886 E0.04461 ; perimeter
G1 X164.517 Y77.948 E0.06010 ; perimeter
G1 X166.202 Y77.948 E0.06941 ; perimeter
G1 X164.142 Y79.677 E0.11080 ; perimeter
M204 S1000 ; adjust acceleration
G1 X163.850 Y80.032 F10800.000 ; move inwards before travel
G1 F8640
G1 X163.399 Y78.886 E-0.25045 ; wipe and retract
G1 X164.517 Y77.948 E-0.33688 ; wipe and retract
G1 X165.265 Y77.948 E-0.17267 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.350 F10800.000 ; lift Z
G1 X85.904 Y79.716 ; move to first perimeter point
G1 Z3.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X83.798 Y77.948 E0.11327 ; perimeter
G1 X85.483 Y77.948 E0.06941 ; perimeter
G1 X86.601 Y78.886 E0.06010 ; perimeter
G1 X85.943 Y79.670 E0.04214 ; perimeter
M204 S1000 ; adjust acceleration
G1 X85.753 Y80.086 F10800.000 ; move inwards before travel
G1 F8640
G1 X83.798 Y77.948 E-0.63505 ; wipe and retract
G1 X84.339 Y77.948 E-0.12495 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.350 F10800.000 ; lift Z
G1 X125.000 Y84.469 ; move to first perimeter point
G1 Z3.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.487 Y84.469 E1.25702 ; perimeter
G1 X85.771 Y77.156 E0.46869 ; perimeter
G1 X80.634 Y77.156 E0.21162 ; perimeter
G1 X66.508 Y65.302 E0.75967 ; perimeter
G1 X66.588 Y65.207 E0.00510 ; perimeter
G1 X80.679 Y77.032 E0.75781 ; perimeter
G1 X85.816 Y77.032 E0.21162 ; perimeter
G1 X94.532 Y84.345 E0.46869 ; perimeter
G1 X155.468 Y84.345 E2.51032 ; perimeter
G1 X164.184 Y77.032 E0.46869 ; perimeter
G1 X169.321 Y77.032 E0.21162 ; perimeter
G1 X183.412 Y65.207 E0.75781 ; perimeter
G1 X183.492 Y65.302 E0.00510 ; perimeter
G1 X169.366 Y77.156 E0.75967 ; perimeter
G1 X164.229 Y77.156 E0.21162 ; perimeter
G1 X155.513 Y84.469 E0.46869 ; perimeter
G1 X125.060 Y84.469 E1.25454 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y84.469 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.350 F10800.000 ; lift Z
G1 X125.000 Y97.292 ; move to first perimeter point
G1 Z3.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.150 Y97.292 E1.88881 ; perimeter
G1 X55.980 Y77.849 E1.24605 ; perimeter
G1 X56.059 Y77.755 E0.00510 ; perimeter
G1 X79.195 Y97.168 E1.24419 ; perimeter
G1 X170.805 Y97.168 E3.77391 ; perimeter
G1 X193.941 Y77.755 E1.24419 ; perimeter
G1 X194.020 Y77.849 E0.00510 ; perimeter
G1 X170.850 Y97.292 E1.24605 ; perimeter
G1 X125.060 Y97.292 E1.88634 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y97.688 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.006 Y97.688 E1.89475 ; perimeter
G1 X55.421 Y77.898 E1.26832 ; perimeter
G1 X66.539 Y64.649 E0.71251 ; perimeter
G1 X80.824 Y76.635 E0.76819 ; perimeter
G1 X85.961 Y76.635 E0.21162 ; perimeter
G1 X94.676 Y83.948 E0.46869 ; perimeter
G1 X155.324 Y83.948 E2.49843 ; perimeter
G1 X164.039 Y76.635 E0.46869 ; perimeter
G1 X169.176 Y76.635 E0.21162 ; perimeter
G1 X183.461 Y64.649 E0.76820 ; perimeter
G1 X194.579 Y77.898 E0.71251 ; perimeter
G1 X170.994 Y97.688 E1.26832 ; perimeter
G1 X125.060 Y97.688 E1.89228 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y98.085 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.862 Y98.085 E1.90070 ; perimeter
G1 X54.870 Y77.953 E1.29023 ; perimeter
G1 X66.492 Y64.092 E0.74517 ; perimeter
G1 X80.968 Y76.239 E0.77850 ; perimeter
G1 X86.105 Y76.239 E0.21162 ; perimeter
G1 X94.820 Y83.552 E0.46869 ; perimeter
G1 X155.180 Y83.552 E2.48654 ; perimeter
G1 X163.895 Y76.239 E0.46869 ; perimeter
G1 X169.032 Y76.239 E0.21162 ; perimeter
G1 X183.508 Y64.092 E0.77850 ; perimeter
G1 X195.135 Y77.948 E0.74517 ; perimeter
G1 X171.138 Y98.085 E1.29050 ; perimeter
G1 X125.060 Y98.085 E1.89823 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.769 Y97.758 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y98.085 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.350 F10800.000 ; lift Z
G1 X124.715 Y134.918 ; move to first perimeter point
G1 Z3.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.054 Y134.918 E1.88101 ; perimeter
G1 X56.233 Y115.768 E1.22728 ; perimeter
G1 X59.724 Y111.607 E0.22376 ; perimeter
G1 X62.530 Y113.961 E0.15087 ; perimeter
G1 X62.874 Y113.551 E0.02205 ; perimeter
G1 X60.068 Y111.197 E0.15087 ; perimeter
G1 X63.480 Y107.132 E0.21861 ; perimeter
G1 X66.285 Y109.486 E0.15087 ; perimeter
G1 X66.629 Y109.076 E0.02205 ; perimeter
G1 X63.824 Y106.722 E0.15087 ; perimeter
G1 X66.172 Y103.923 E0.15052 ; perimeter
G1 X80.205 Y115.698 E0.75464 ; perimeter
G1 X85.342 Y115.698 E0.21162 ; perimeter
G1 X86.874 Y116.983 E0.08237 ; perimeter
G1 X85.668 Y118.420 E0.07727 ; perimeter
G1 X82.749 Y115.971 E0.15696 ; perimeter
G1 X82.405 Y116.381 E0.02205 ; perimeter
G1 X85.324 Y118.830 E0.15696 ; perimeter
G1 X78.648 Y126.787 E0.42789 ; perimeter
G1 X75.729 Y124.338 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.854 Y130.116 E0.15696 ; perimeter
G1 X76.264 Y130.460 E0.02205 ; perimeter
G1 X87.284 Y117.327 E0.70622 ; perimeter
G1 X94.057 Y123.011 E0.36426 ; perimeter
G1 X150.247 Y123.011 E2.31477 ; perimeter
G1 X155.372 Y123.011 E0.21114 ; perimeter
G1 X162.146 Y117.327 E0.36426 ; perimeter
G1 X173.165 Y130.460 E0.70622 ; perimeter
G1 X173.575 Y130.116 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.15696 ; perimeter
G1 X173.701 Y124.338 E0.02205 ; perimeter
G1 X170.782 Y126.787 E0.15696 ; perimeter
G1 X164.106 Y118.830 E0.42789 ; perimeter
G1 X167.024 Y116.381 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X162.556 Y116.983 E0.07727 ; perimeter
G1 X164.088 Y115.698 E0.08237 ; perimeter
G1 X169.225 Y115.698 E0.21162 ; perimeter
G1 X183.257 Y103.923 E0.75464 ; perimeter
G1 X185.606 Y106.722 E0.15052 ; perimeter
G1 X182.801 Y109.076 E0.15087 ; perimeter
G1 X183.145 Y109.486 E0.02205 ; perimeter
G1 X185.950 Y107.132 E0.15087 ; perimeter
G1 X189.361 Y111.197 E0.21861 ; perimeter
G1 X186.556 Y113.551 E0.15087 ; perimeter
G1 X186.900 Y113.961 E0.02205 ; perimeter
G1 X189.705 Y111.607 E0.15087 ; perimeter
G1 X193.197 Y115.768 E0.22376 ; perimeter
G1 X170.375 Y134.918 E1.22728 ; perimeter
G1 X124.775 Y134.918 E1.87854 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y134.521 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.199 Y134.521 E1.87507 ; perimeter
M73 Q21 S108
G1 X56.791 Y115.719 E1.20501 ; perimeter
G1 X59.773 Y112.166 E0.19111 ; perimeter
G1 X62.579 Y114.520 E0.15087 ; perimeter
G1 X63.432 Y113.502 E0.05471 ; perimeter
G1 X60.627 Y111.148 E0.15087 ; perimeter
G1 X63.528 Y107.690 E0.18596 ; perimeter
G1 X66.334 Y110.044 E0.15087 ; perimeter
G1 X67.187 Y109.027 E0.05471 ; perimeter
G1 X64.382 Y106.673 E0.15087 ; perimeter
G1 X66.221 Y104.482 E0.11786 ; perimeter
G1 X80.061 Y116.094 E0.74426 ; perimeter
G1 X82.129 Y116.094 E0.08519 ; perimeter
G1 X81.847 Y116.430 E0.01805 ; perimeter
G1 X84.766 Y118.879 E0.15696 ; perimeter
G1 X78.599 Y126.229 E0.39523 ; perimeter
G1 X75.680 Y123.779 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.296 Y130.164 E0.15696 ; perimeter
G1 X76.313 Y131.018 E0.05471 ; perimeter
G1 X87.333 Y117.886 E0.70622 ; perimeter
G1 X93.913 Y123.407 E0.35388 ; perimeter
G1 X150.247 Y123.407 E2.32072 ; perimeter
G1 X155.517 Y123.407 E0.21708 ; perimeter
G1 X162.097 Y117.886 E0.35388 ; perimeter
G1 X173.116 Y131.018 E0.70622 ; perimeter
G1 X174.134 Y130.164 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.15696 ; perimeter
G1 X173.750 Y123.779 E0.05471 ; perimeter
G1 X170.831 Y126.229 E0.15696 ; perimeter
G1 X164.664 Y118.879 E0.39523 ; perimeter
G1 X167.583 Y116.430 E0.15696 ; perimeter
G1 X167.301 Y116.094 E0.01805 ; perimeter
G1 X169.369 Y116.094 E0.08519 ; perimeter
G1 X183.209 Y104.482 E0.74426 ; perimeter
G1 X185.048 Y106.673 E0.11786 ; perimeter
G1 X182.242 Y109.027 E0.15087 ; perimeter
G1 X183.096 Y110.044 E0.05471 ; perimeter
G1 X185.901 Y107.690 E0.15087 ; perimeter
G1 X188.803 Y111.148 E0.18596 ; perimeter
G1 X185.997 Y113.502 E0.15087 ; perimeter
G1 X186.851 Y114.520 E0.05471 ; perimeter
G1 X189.656 Y112.166 E0.15087 ; perimeter
G1 X192.638 Y115.719 E0.19111 ; perimeter
G1 X170.231 Y134.521 E1.20501 ; perimeter
G1 X124.775 Y134.521 E1.87260 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.547 Y134.884 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y134.521 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.350 F10800.000 ; lift Z
G1 X163.810 Y117.862 ; move to first perimeter point
G1 Z3.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X163.114 Y117.032 E0.04461 ; perimeter
G1 X164.232 Y116.094 E0.06010 ; perimeter
G1 X165.917 Y116.094 E0.06941 ; perimeter
G1 X163.856 Y117.823 E0.11080 ; perimeter
M204 S1000 ; adjust acceleration
G1 X163.565 Y118.178 F10800.000 ; move inwards before travel
G1 F8640
G1 X163.114 Y117.032 E-0.25045 ; wipe and retract
G1 X164.232 Y116.094 E-0.33688 ; wipe and retract
G1 X164.980 Y116.094 E-0.17267 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.350 F10800.000 ; lift Z
G1 X85.619 Y117.862 ; move to first perimeter point
G1 Z3.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X83.513 Y116.094 E0.11327 ; perimeter
G1 X85.198 Y116.094 E0.06941 ; perimeter
G1 X86.315 Y117.032 E0.06010 ; perimeter
G1 X85.658 Y117.816 E0.04214 ; perimeter
M204 S1000 ; adjust acceleration
G1 X85.468 Y118.232 F10800.000 ; move inwards before travel
G1 F8640
G1 X83.513 Y116.094 E-0.63505 ; wipe and retract
G1 X84.054 Y116.094 E-0.12495 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.350 F10800.000 ; lift Z
G1 X124.715 Y122.615 ; move to first perimeter point
G1 Z3.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.202 Y122.615 E1.25702 ; perimeter
G1 X85.486 Y115.302 E0.46869 ; perimeter
G1 X80.349 Y115.302 E0.21162 ; perimeter
G1 X66.223 Y103.448 E0.75967 ; perimeter
G1 X66.303 Y103.353 E0.00510 ; perimeter
G1 X80.394 Y115.178 E0.75781 ; perimeter
G1 X85.531 Y115.178 E0.21162 ; perimeter
G1 X94.247 Y122.491 E0.46869 ; perimeter
G1 X155.183 Y122.491 E2.51032 ; perimeter
G1 X163.898 Y115.178 E0.46869 ; perimeter
G1 X169.035 Y115.178 E0.21162 ; perimeter
G1 X183.127 Y103.353 E0.75781 ; perimeter
G1 X183.207 Y103.448 E0.00510 ; perimeter
G1 X169.080 Y115.302 E0.75967 ; perimeter
G1 X163.943 Y115.302 E0.21162 ; perimeter
G1 X155.228 Y122.615 E0.46869 ; perimeter
G1 X124.775 Y122.615 E1.25454 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y122.615 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.350 F10800.000 ; lift Z
G1 X124.715 Y135.438 ; move to first perimeter point
G1 Z3.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.865 Y135.438 E1.88881 ; perimeter
G1 X55.695 Y115.996 E1.24605 ; perimeter
G1 X55.774 Y115.901 E0.00510 ; perimeter
G1 X78.910 Y135.314 E1.24419 ; perimeter
G1 X170.519 Y135.314 E3.77391 ; perimeter
M73 P22 R106
G1 X193.655 Y115.901 E1.24419 ; perimeter
G1 X193.735 Y115.996 E0.00510 ; perimeter
G1 X170.564 Y135.438 E1.24605 ; perimeter
G1 X124.775 Y135.438 E1.88634 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y135.834 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.721 Y135.834 E1.89475 ; perimeter
G1 X55.136 Y116.044 E1.26832 ; perimeter
G1 X66.254 Y102.795 E0.71251 ; perimeter
G1 X80.539 Y114.781 E0.76819 ; perimeter
G1 X85.676 Y114.781 E0.21162 ; perimeter
G1 X94.391 Y122.095 E0.46869 ; perimeter
G1 X155.039 Y122.095 E2.49843 ; perimeter
G1 X163.754 Y114.781 E0.46869 ; perimeter
G1 X168.891 Y114.781 E0.21162 ; perimeter
G1 X183.176 Y102.795 E0.76820 ; perimeter
G1 X194.293 Y116.044 E0.71251 ; perimeter
G1 X170.709 Y135.834 E1.26832 ; perimeter
G1 X124.775 Y135.834 E1.89228 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y136.231 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.577 Y136.231 E1.90070 ; perimeter
G1 X54.584 Y116.099 E1.29023 ; perimeter
G1 X66.206 Y102.238 E0.74517 ; perimeter
G1 X80.683 Y114.385 E0.77850 ; perimeter
G1 X85.820 Y114.385 E0.21162 ; perimeter
G1 X94.535 Y121.698 E0.46869 ; perimeter
G1 X154.894 Y121.698 E2.48654 ; perimeter
G1 X163.610 Y114.385 E0.46869 ; perimeter
G1 X168.747 Y114.385 E0.21162 ; perimeter
G1 X183.223 Y102.238 E0.77850 ; perimeter
G1 X194.850 Y116.095 E0.74517 ; perimeter
G1 X170.853 Y136.231 E1.29050 ; perimeter
G1 X124.775 Y136.231 E1.89823 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.483 Y135.904 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;4


G1 F8640
G1 X121.483 Y136.231 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;4
G1 X125.000 Y96.947 ; move to first perimeter point
G1 Z4.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.276 Y96.947 E1.88364 ; perimeter
G1 X56.272 Y77.644 E1.23711 ; perimeter
G1 X59.875 Y73.349 E0.23097 ; perimeter
G1 X62.676 Y75.698 E0.15060 ; perimeter
G1 X63.020 Y75.288 E0.02205 ; perimeter
G1 X60.220 Y72.939 E0.15060 ; perimeter
G1 X63.631 Y68.873 E0.21861 ; perimeter
G1 X66.431 Y71.223 E0.15060 ; perimeter
G1 X66.775 Y70.813 E0.02205 ; perimeter
G1 X63.975 Y68.463 E0.15060 ; perimeter
G1 X66.436 Y65.530 E0.15773 ; perimeter
G1 X80.554 Y77.377 E0.75923 ; perimeter
G1 X85.691 Y77.377 E0.21162 ; perimeter
G1 X87.271 Y78.703 E0.08500 ; perimeter
G1 X85.953 Y80.274 E0.08448 ; perimeter
G1 X83.035 Y77.825 E0.15696 ; perimeter
G1 X82.691 Y78.235 E0.02205 ; perimeter
G1 X85.609 Y80.684 E0.15696 ; perimeter
G1 X78.933 Y88.641 E0.42789 ; perimeter
G1 X76.014 Y86.192 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.140 Y91.969 E0.15696 ; perimeter
G1 X76.550 Y92.314 E0.02205 ; perimeter
G1 X87.681 Y79.047 E0.71343 ; perimeter
G1 X94.406 Y84.690 E0.36164 ; perimeter
G1 X149.900 Y84.690 E2.28612 ; perimeter
G1 X155.594 Y84.690 E0.23455 ; perimeter
G1 X162.319 Y79.047 E0.36164 ; perimeter
G1 X173.450 Y92.314 E0.71343 ; perimeter
G1 X173.860 Y91.969 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.15696 ; perimeter
G1 X173.986 Y86.192 E0.02205 ; perimeter
G1 X171.067 Y88.641 E0.15696 ; perimeter
G1 X164.391 Y80.684 E0.42789 ; perimeter
G1 X167.309 Y78.235 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X162.729 Y78.703 E0.08448 ; perimeter
G1 X164.309 Y77.377 E0.08500 ; perimeter
G1 X169.446 Y77.377 E0.21162 ; perimeter
G1 X183.564 Y65.530 E0.75923 ; perimeter
G1 X186.025 Y68.463 E0.15773 ; perimeter
G1 X183.225 Y70.813 E0.15060 ; perimeter
G1 X183.569 Y71.223 E0.02205 ; perimeter
G1 X186.369 Y68.873 E0.15060 ; perimeter
G1 X189.780 Y72.939 E0.21861 ; perimeter
G1 X186.980 Y75.288 E0.15060 ; perimeter
G1 X187.324 Y75.698 E0.02205 ; perimeter
G1 X190.125 Y73.349 E0.15060 ; perimeter
G1 X193.728 Y77.644 E0.23097 ; perimeter
G1 X170.724 Y96.947 E1.23711 ; perimeter
G1 X125.060 Y96.947 E1.88116 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y96.550 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.420 Y96.550 E1.87769 ; perimeter
G1 X56.830 Y77.595 E1.21484 ; perimeter
G1 X59.924 Y73.907 E0.19832 ; perimeter
G1 X62.725 Y76.257 E0.15060 ; perimeter
G1 X63.578 Y75.240 E0.05471 ; perimeter
G1 X60.778 Y72.890 E0.15060 ; perimeter
G1 X63.679 Y69.432 E0.18596 ; perimeter
G1 X66.480 Y71.782 E0.15060 ; perimeter
G1 X67.333 Y70.764 E0.05471 ; perimeter
G1 X64.533 Y68.414 E0.15060 ; perimeter
G1 X66.485 Y66.089 E0.12507 ; perimeter
G1 X80.410 Y77.773 E0.74884 ; perimeter
G1 X82.561 Y77.773 E0.08862 ; perimeter
G1 X82.132 Y78.284 E0.02747 ; perimeter
G1 X85.051 Y80.733 E0.15696 ; perimeter
G1 X78.884 Y88.082 E0.39523 ; perimeter
G1 X75.965 Y85.633 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.581 Y92.018 E0.15696 ; perimeter
G1 X76.599 Y92.872 E0.05471 ; perimeter
G1 X87.730 Y79.606 E0.71343 ; perimeter
G1 X94.262 Y85.086 E0.35125 ; perimeter
G1 X149.900 Y85.086 E2.29206 ; perimeter
G1 X155.738 Y85.086 E0.24049 ; perimeter
G1 X162.270 Y79.606 E0.35125 ; perimeter
G1 X173.401 Y92.872 E0.71343 ; perimeter
G1 X174.419 Y92.018 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.15696 ; perimeter
G1 X174.035 Y85.633 E0.05471 ; perimeter
G1 X171.116 Y88.082 E0.15696 ; perimeter
G1 X164.949 Y80.733 E0.39523 ; perimeter
G1 X167.868 Y78.284 E0.15696 ; perimeter
G1 X167.439 Y77.773 E0.02747 ; perimeter
G1 X169.590 Y77.773 E0.08862 ; perimeter
G1 X183.515 Y66.089 E0.74884 ; perimeter
G1 X185.467 Y68.414 E0.12507 ; perimeter
G1 X182.667 Y70.764 E0.15060 ; perimeter
G1 X183.520 Y71.782 E0.05471 ; perimeter
G1 X186.321 Y69.432 E0.15060 ; perimeter
G1 X189.222 Y72.890 E0.18596 ; perimeter
G1 X186.422 Y75.240 E0.15060 ; perimeter
G1 X187.275 Y76.257 E0.05471 ; perimeter
G1 X190.076 Y73.907 E0.15060 ; perimeter
G1 X193.170 Y77.595 E0.19832 ; perimeter
G1 X170.580 Y96.550 E1.21484 ; perimeter
G1 X125.060 Y96.550 E1.87522 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.832 Y96.913 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y96.550 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.600 F10800.000 ; lift Z
G1 X164.096 Y79.716 ; move to first perimeter point
G1 Z4.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X163.287 Y78.752 E0.05183 ; perimeter
G1 X164.453 Y77.773 E0.06273 ; perimeter
G1 X166.411 Y77.773 E0.08063 ; perimeter
G1 X164.142 Y79.677 E0.12202 ; perimeter
M204 S1000 ; adjust acceleration
G1 X163.856 Y80.036 F10800.000 ; move inwards before travel
G1 F8640
G1 X163.287 Y78.752 E-0.29081 ; wipe and retract
G1 X164.453 Y77.773 E-0.35159 ; wipe and retract
G1 X164.963 Y77.773 E-0.11759 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.600 F10800.000 ; lift Z
G1 X85.904 Y79.716 ; move to first perimeter point
G1 Z4.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X83.589 Y77.773 E0.12449 ; perimeter
G1 X85.547 Y77.773 E0.08063 ; perimeter
G1 X86.713 Y78.752 E0.06273 ; perimeter
G1 X85.943 Y79.670 E0.04935 ; perimeter
M204 S1000 ; adjust acceleration
G1 X85.747 Y80.083 F10800.000 ; move inwards before travel
G1 F8640
G1 X83.589 Y77.773 E-0.69791 ; wipe and retract
G1 X83.858 Y77.773 E-0.06209 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.600 F10800.000 ; lift Z
G1 X125.000 Y84.294 ; move to first perimeter point
G1 Z4.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.550 Y84.294 E1.25439 ; perimeter
G1 X85.835 Y76.980 E0.46869 ; perimeter
G1 X80.698 Y76.980 E0.21162 ; perimeter
G1 X66.487 Y65.056 E0.76425 ; perimeter
G1 X66.566 Y64.961 E0.00510 ; perimeter
G1 X80.743 Y76.857 E0.76240 ; perimeter
G1 X85.880 Y76.857 E0.21162 ; perimeter
G1 X94.596 Y84.170 E0.46869 ; perimeter
G1 X155.404 Y84.170 E2.50507 ; perimeter
G1 X164.120 Y76.857 E0.46869 ; perimeter
G1 X169.257 Y76.857 E0.21162 ; perimeter
G1 X183.434 Y64.961 E0.76240 ; perimeter
G1 X183.513 Y65.056 E0.00510 ; perimeter
G1 X169.302 Y76.980 E0.76425 ; perimeter
G1 X164.165 Y76.980 E0.21162 ; perimeter
G1 X155.450 Y84.294 E0.46869 ; perimeter
G1 X125.060 Y84.294 E1.25192 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y84.294 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.600 F10800.000 ; lift Z
G1 X125.000 Y97.467 ; move to first perimeter point
G1 Z4.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.087 Y97.467 E1.89144 ; perimeter
M73 Q22 S107
G1 X55.733 Y77.871 E1.25588 ; perimeter
G1 X55.813 Y77.776 E0.00510 ; perimeter
G1 X79.132 Y97.343 E1.25402 ; perimeter
G1 X170.868 Y97.343 E3.77916 ; perimeter
G1 X194.187 Y77.776 E1.25402 ; perimeter
G1 X194.267 Y77.871 E0.00510 ; perimeter
G1 X170.913 Y97.467 E1.25588 ; perimeter
G1 X125.060 Y97.467 E1.88896 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y97.863 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.942 Y97.863 E1.89738 ; perimeter
G1 X55.175 Y77.920 E1.27815 ; perimeter
G1 X66.517 Y64.402 E0.72694 ; perimeter
G1 X80.887 Y76.460 E0.77278 ; perimeter
G1 X86.024 Y76.460 E0.21162 ; perimeter
G1 X94.740 Y83.773 E0.46869 ; perimeter
G1 X155.260 Y83.773 E2.49318 ; perimeter
G1 X163.976 Y76.460 E0.46869 ; perimeter
G1 X169.113 Y76.460 E0.21162 ; perimeter
G1 X183.483 Y64.402 E0.77278 ; perimeter
G1 X194.825 Y77.920 E0.72694 ; perimeter
G1 X171.058 Y97.863 E1.27815 ; perimeter
G1 X125.060 Y97.863 E1.89491 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y98.260 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.798 Y98.260 E1.90332 ; perimeter
G1 X54.631 Y77.981 E1.29964 ; perimeter
G1 X54.753 Y77.806 E0.00878 ; perimeter
G1 X66.332 Y64.007 E0.74210 ; perimeter
G1 X66.483 Y63.856 E0.00878 ; perimeter
G1 X81.032 Y76.064 E0.78238 ; perimeter
G1 X86.169 Y76.064 E0.21162 ; perimeter
G1 X94.884 Y83.377 E0.46869 ; perimeter
G1 X155.116 Y83.377 E2.48130 ; perimeter
G1 X163.831 Y76.064 E0.46869 ; perimeter
G1 X168.968 Y76.064 E0.21162 ; perimeter
G1 X183.522 Y63.852 E0.78264 ; perimeter
G1 X183.666 Y64.004 E0.00863 ; perimeter
G1 X195.247 Y77.806 E0.74223 ; perimeter
G1 X195.369 Y77.981 E0.00878 ; perimeter
G1 X171.202 Y98.260 E1.29964 ; perimeter
G1 X125.060 Y98.260 E1.90085 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.769 Y97.933 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y98.260 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.600 F10800.000 ; lift Z
G1 X124.715 Y135.093 ; move to first perimeter point
G1 Z4.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.991 Y135.093 E1.88364 ; perimeter
G1 X55.986 Y115.790 E1.23711 ; perimeter
G1 X59.590 Y111.495 E0.23097 ; perimeter
G1 X62.391 Y113.845 E0.15060 ; perimeter
G1 X62.735 Y113.434 E0.02205 ; perimeter
G1 X59.934 Y111.085 E0.15060 ; perimeter
G1 X63.345 Y107.020 E0.21861 ; perimeter
G1 X66.146 Y109.369 E0.15060 ; perimeter
G1 X66.490 Y108.959 E0.02205 ; perimeter
G1 X63.690 Y106.609 E0.15060 ; perimeter
G1 X66.151 Y103.677 E0.15773 ; perimeter
G1 X80.269 Y115.523 E0.75923 ; perimeter
G1 X85.406 Y115.523 E0.21162 ; perimeter
G1 X86.986 Y116.849 E0.08500 ; perimeter
G1 X85.668 Y118.420 E0.08448 ; perimeter
G1 X82.749 Y115.971 E0.15696 ; perimeter
G1 X82.405 Y116.381 E0.02205 ; perimeter
G1 X85.324 Y118.830 E0.15696 ; perimeter
G1 X78.648 Y126.787 E0.42789 ; perimeter
G1 X75.729 Y124.338 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.854 Y130.116 E0.15696 ; perimeter
G1 X76.264 Y130.460 E0.02205 ; perimeter
G1 X87.396 Y117.193 E0.71343 ; perimeter
G1 X94.121 Y122.836 E0.36164 ; perimeter
G1 X149.615 Y122.836 E2.28612 ; perimeter
M73 P22 R105
G1 X155.309 Y122.836 E0.23455 ; perimeter
G1 X162.033 Y117.193 E0.36164 ; perimeter
G1 X173.165 Y130.460 E0.71343 ; perimeter
G1 X173.575 Y130.116 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.15696 ; perimeter
G1 X173.701 Y124.338 E0.02205 ; perimeter
G1 X170.782 Y126.787 E0.15696 ; perimeter
G1 X164.106 Y118.830 E0.42789 ; perimeter
G1 X167.024 Y116.381 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X162.443 Y116.849 E0.08448 ; perimeter
G1 X164.024 Y115.523 E0.08500 ; perimeter
G1 X169.161 Y115.523 E0.21162 ; perimeter
G1 X183.279 Y103.676 E0.75923 ; perimeter
G1 X185.740 Y106.609 E0.15773 ; perimeter
G1 X182.940 Y108.959 E0.15060 ; perimeter
G1 X183.284 Y109.369 E0.02205 ; perimeter
G1 X186.084 Y107.020 E0.15060 ; perimeter
G1 X189.495 Y111.085 E0.21861 ; perimeter
G1 X186.695 Y113.434 E0.15060 ; perimeter
G1 X187.039 Y113.845 E0.02205 ; perimeter
G1 X189.839 Y111.495 E0.15060 ; perimeter
G1 X193.443 Y115.790 E0.23097 ; perimeter
G1 X170.439 Y135.093 E1.23711 ; perimeter
G1 X124.775 Y135.093 E1.88116 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y134.696 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.135 Y134.696 E1.87769 ; perimeter
G1 X56.545 Y115.741 E1.21484 ; perimeter
G1 X59.639 Y112.053 E0.19832 ; perimeter
G1 X62.440 Y114.403 E0.15060 ; perimeter
G1 X63.293 Y113.386 E0.05471 ; perimeter
G1 X60.493 Y111.036 E0.15060 ; perimeter
G1 X63.394 Y107.578 E0.18596 ; perimeter
G1 X66.195 Y109.928 E0.15060 ; perimeter
G1 X67.048 Y108.910 E0.05471 ; perimeter
G1 X64.248 Y106.561 E0.15060 ; perimeter
G1 X66.199 Y104.235 E0.12507 ; perimeter
G1 X80.124 Y115.919 E0.74884 ; perimeter
G1 X82.276 Y115.919 E0.08862 ; perimeter
G1 X81.847 Y116.430 E0.02747 ; perimeter
G1 X84.766 Y118.879 E0.15696 ; perimeter
G1 X78.599 Y126.229 E0.39523 ; perimeter
G1 X75.680 Y123.779 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.296 Y130.164 E0.15696 ; perimeter
G1 X76.313 Y131.018 E0.05471 ; perimeter
G1 X87.445 Y117.752 E0.71343 ; perimeter
G1 X93.977 Y123.232 E0.35125 ; perimeter
G1 X149.615 Y123.232 E2.29206 ; perimeter
G1 X155.453 Y123.232 E0.24049 ; perimeter
G1 X161.984 Y117.752 E0.35125 ; perimeter
G1 X173.116 Y131.018 E0.71343 ; perimeter
G1 X174.134 Y130.164 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.15696 ; perimeter
G1 X173.750 Y123.779 E0.05471 ; perimeter
G1 X170.831 Y126.229 E0.15696 ; perimeter
G1 X164.664 Y118.879 E0.39523 ; perimeter
G1 X167.583 Y116.430 E0.15696 ; perimeter
G1 X167.154 Y115.919 E0.02747 ; perimeter
G1 X169.305 Y115.919 E0.08862 ; perimeter
G1 X183.230 Y104.235 E0.74884 ; perimeter
G1 X185.182 Y106.561 E0.12507 ; perimeter
G1 X182.381 Y108.910 E0.15060 ; perimeter
G1 X183.235 Y109.928 E0.05471 ; perimeter
G1 X186.035 Y107.578 E0.15060 ; perimeter
G1 X188.937 Y111.036 E0.18596 ; perimeter
G1 X186.136 Y113.386 E0.15060 ; perimeter
G1 X186.990 Y114.403 E0.05471 ; perimeter
G1 X189.790 Y112.053 E0.15060 ; perimeter
G1 X192.885 Y115.741 E0.19832 ; perimeter
G1 X170.295 Y134.696 E1.21484 ; perimeter
G1 X124.775 Y134.696 E1.87522 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.547 Y135.060 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y134.696 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.600 F10800.000 ; lift Z
G1 X163.810 Y117.862 ; move to first perimeter point
G1 Z4.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X163.002 Y116.898 E0.05183 ; perimeter
G1 X164.168 Y115.919 E0.06273 ; perimeter
G1 X166.125 Y115.919 E0.08063 ; perimeter
G1 X163.856 Y117.823 E0.12202 ; perimeter
M204 S1000 ; adjust acceleration
G1 X163.571 Y118.182 F10800.000 ; move inwards before travel
G1 F8640
G1 X163.002 Y116.898 E-0.29081 ; wipe and retract
G1 X164.168 Y115.919 E-0.35159 ; wipe and retract
G1 X164.678 Y115.919 E-0.11759 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.600 F10800.000 ; lift Z
G1 X85.619 Y117.862 ; move to first perimeter point
G1 Z4.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X83.304 Y115.919 E0.12449 ; perimeter
G1 X85.261 Y115.919 E0.08063 ; perimeter
G1 X86.428 Y116.898 E0.06273 ; perimeter
G1 X85.658 Y117.816 E0.04935 ; perimeter
M204 S1000 ; adjust acceleration
G1 X85.462 Y118.229 F10800.000 ; move inwards before travel
G1 F8640
G1 X83.304 Y115.919 E-0.69791 ; wipe and retract
G1 X83.573 Y115.919 E-0.06209 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.600 F10800.000 ; lift Z
G1 X124.715 Y122.440 ; move to first perimeter point
G1 Z4.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.265 Y122.440 E1.25439 ; perimeter
G1 X85.550 Y115.127 E0.46869 ; perimeter
G1 X80.413 Y115.127 E0.21162 ; perimeter
G1 X66.201 Y103.202 E0.76425 ; perimeter
G1 X66.281 Y103.107 E0.00510 ; perimeter
G1 X80.458 Y115.003 E0.76240 ; perimeter
G1 X85.595 Y115.003 E0.21162 ; perimeter
G1 X94.310 Y122.316 E0.46869 ; perimeter
G1 X155.119 Y122.316 E2.50507 ; perimeter
G1 X163.835 Y115.003 E0.46869 ; perimeter
G1 X168.972 Y115.003 E0.21162 ; perimeter
G1 X183.149 Y103.107 E0.76240 ; perimeter
G1 X183.228 Y103.202 E0.00510 ; perimeter
G1 X169.017 Y115.127 E0.76425 ; perimeter
G1 X163.880 Y115.127 E0.21162 ; perimeter
G1 X155.164 Y122.440 E0.46869 ; perimeter
G1 X124.775 Y122.440 E1.25192 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y122.440 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.600 F10800.000 ; lift Z
G1 X124.715 Y135.613 ; move to first perimeter point
G1 Z4.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.801 Y135.613 E1.89144 ; perimeter
G1 X55.448 Y116.017 E1.25588 ; perimeter
G1 X55.528 Y115.922 E0.00510 ; perimeter
G1 X78.847 Y135.489 E1.25402 ; perimeter
G1 X170.583 Y135.489 E3.77916 ; perimeter
G1 X193.902 Y115.922 E1.25402 ; perimeter
G1 X193.982 Y116.017 E0.00510 ; perimeter
G1 X170.628 Y135.613 E1.25588 ; perimeter
G1 X124.775 Y135.613 E1.88896 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y136.009 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.657 Y136.009 E1.89738 ; perimeter
G1 X54.890 Y116.066 E1.27815 ; perimeter
G1 X66.232 Y102.548 E0.72694 ; perimeter
G1 X80.602 Y114.606 E0.77278 ; perimeter
G1 X85.739 Y114.606 E0.21162 ; perimeter
G1 X94.455 Y121.919 E0.46869 ; perimeter
G1 X154.975 Y121.919 E2.49318 ; perimeter
G1 X163.690 Y114.606 E0.46869 ; perimeter
G1 X168.827 Y114.606 E0.21162 ; perimeter
G1 X183.197 Y102.548 E0.77278 ; perimeter
G1 X194.540 Y116.066 E0.72694 ; perimeter
G1 X170.772 Y136.009 E1.27815 ; perimeter
G1 X124.775 Y136.009 E1.89491 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y136.406 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.513 Y136.406 E1.90332 ; perimeter
G1 X54.346 Y116.127 E1.29964 ; perimeter
G1 X54.468 Y115.952 E0.00878 ; perimeter
G1 X66.047 Y102.153 E0.74210 ; perimeter
G1 X66.198 Y102.002 E0.00878 ; perimeter
G1 X80.747 Y114.210 E0.78238 ; perimeter
G1 X85.884 Y114.210 E0.21162 ; perimeter
G1 X94.599 Y121.523 E0.46869 ; perimeter
G1 X154.831 Y121.523 E2.48130 ; perimeter
G1 X163.546 Y114.210 E0.46869 ; perimeter
G1 X168.683 Y114.210 E0.21162 ; perimeter
G1 X183.237 Y101.998 E0.78264 ; perimeter
G1 X183.381 Y102.150 E0.00863 ; perimeter
G1 X194.962 Y115.952 E0.74223 ; perimeter
G1 X195.084 Y116.127 E0.00878 ; perimeter
G1 X170.917 Y136.406 E1.29964 ; perimeter
G1 X124.775 Y136.406 E1.90085 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.483 Y136.079 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;4.25


G1 F8640
G1 X121.483 Y136.406 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;4.25
G1 X125.000 Y97.122 ; move to first perimeter point
G1 Z4.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.212 Y97.122 E1.88626 ; perimeter
G1 X56.025 Y77.665 E1.24695 ; perimeter
G1 X59.741 Y73.236 E0.23819 ; perimeter
G1 X62.537 Y75.582 E0.15032 ; perimeter
G1 X62.881 Y75.172 E0.02204 ; perimeter
G1 X60.085 Y72.826 E0.15032 ; perimeter
G1 X63.497 Y68.761 E0.21861 ; perimeter
G1 X66.292 Y71.106 E0.15032 ; perimeter
G1 X66.636 Y70.696 E0.02205 ; perimeter
G1 X63.841 Y68.351 E0.15032 ; perimeter
M73 Q23 S106
G1 X66.414 Y65.284 E0.16494 ; perimeter
G1 X80.618 Y77.202 E0.76382 ; perimeter
G1 X85.755 Y77.202 E0.21162 ; perimeter
G1 X87.384 Y78.569 E0.08762 ; perimeter
G1 X85.953 Y80.274 E0.09169 ; perimeter
G1 X83.035 Y77.825 E0.15696 ; perimeter
G1 X82.691 Y78.235 E0.02205 ; perimeter
G1 X85.609 Y80.684 E0.15696 ; perimeter
G1 X78.933 Y88.641 E0.42789 ; perimeter
G1 X76.014 Y86.192 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.140 Y91.969 E0.15696 ; perimeter
G1 X76.550 Y92.314 E0.02205 ; perimeter
G1 X87.794 Y78.913 E0.72064 ; perimeter
G1 X94.470 Y84.515 E0.35901 ; perimeter
G1 X149.269 Y84.515 E2.25747 ; perimeter
G1 X155.530 Y84.515 E0.25795 ; perimeter
G1 X162.206 Y78.913 E0.35901 ; perimeter
G1 X173.450 Y92.314 E0.72064 ; perimeter
G1 X173.860 Y91.969 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.15696 ; perimeter
G1 X173.986 Y86.192 E0.02205 ; perimeter
G1 X171.067 Y88.641 E0.15696 ; perimeter
G1 X164.391 Y80.684 E0.42789 ; perimeter
G1 X167.309 Y78.235 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X162.616 Y78.569 E0.09169 ; perimeter
G1 X164.245 Y77.202 E0.08762 ; perimeter
G1 X169.382 Y77.202 E0.21162 ; perimeter
G1 X183.586 Y65.284 E0.76382 ; perimeter
G1 X186.159 Y68.351 E0.16494 ; perimeter
G1 X183.364 Y70.696 E0.15032 ; perimeter
G1 X183.708 Y71.106 E0.02205 ; perimeter
G1 X186.503 Y68.761 E0.15032 ; perimeter
G1 X189.915 Y72.826 E0.21861 ; perimeter
G1 X187.119 Y75.172 E0.15032 ; perimeter
G1 X187.463 Y75.582 E0.02205 ; perimeter
G1 X190.259 Y73.236 E0.15032 ; perimeter
G1 X193.975 Y77.665 E0.23819 ; perimeter
G1 X170.788 Y97.122 E1.24695 ; perimeter
G1 X125.060 Y97.122 E1.88379 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y96.725 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.357 Y96.725 E1.88032 ; perimeter
G1 X56.583 Y77.616 E1.22468 ; perimeter
G1 X59.790 Y73.795 E0.20553 ; perimeter
G1 X62.586 Y76.140 E0.15032 ; perimeter
G1 X63.439 Y75.123 E0.05471 ; perimeter
G1 X60.644 Y72.777 E0.15032 ; perimeter
G1 X63.545 Y69.319 E0.18596 ; perimeter
G1 X66.341 Y71.665 E0.15032 ; perimeter
G1 X67.194 Y70.648 E0.05471 ; perimeter
G1 X64.399 Y68.302 E0.15032 ; perimeter
G1 X66.463 Y65.842 E0.13228 ; perimeter
G1 X80.473 Y77.598 E0.75343 ; perimeter
G1 X82.708 Y77.598 E0.09204 ; perimeter
G1 X82.132 Y78.284 E0.03688 ; perimeter
G1 X85.051 Y80.733 E0.15696 ; perimeter
G1 X78.884 Y88.082 E0.39523 ; perimeter
G1 X75.965 Y85.633 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.581 Y92.018 E0.15696 ; perimeter
G1 X76.599 Y92.872 E0.05471 ; perimeter
G1 X87.843 Y79.471 E0.72064 ; perimeter
G1 X94.326 Y84.911 E0.34863 ; perimeter
G1 X149.269 Y84.911 E2.26341 ; perimeter
G1 X155.674 Y84.911 E0.26389 ; perimeter
G1 X162.157 Y79.471 E0.34863 ; perimeter
G1 X173.401 Y92.872 E0.72064 ; perimeter
G1 X174.419 Y92.018 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.15696 ; perimeter
G1 X174.035 Y85.633 E0.05471 ; perimeter
G1 X171.116 Y88.082 E0.15696 ; perimeter
G1 X164.949 Y80.733 E0.39523 ; perimeter
G1 X167.868 Y78.284 E0.15696 ; perimeter
G1 X167.292 Y77.598 E0.03688 ; perimeter
G1 X169.527 Y77.598 E0.09204 ; perimeter
G1 X183.537 Y65.842 E0.75343 ; perimeter
G1 X185.601 Y68.302 E0.13228 ; perimeter
G1 X182.806 Y70.648 E0.15032 ; perimeter
G1 X183.659 Y71.665 E0.05471 ; perimeter
G1 X186.455 Y69.319 E0.15032 ; perimeter
G1 X189.356 Y72.777 E0.18596 ; perimeter
G1 X186.561 Y75.123 E0.15032 ; perimeter
G1 X187.414 Y76.140 E0.05469 ; perimeter
G1 X190.210 Y73.795 E0.15032 ; perimeter
G1 X193.417 Y77.616 E0.20553 ; perimeter
G1 X170.643 Y96.725 E1.22468 ; perimeter
G1 X125.060 Y96.725 E1.87785 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.832 Y97.088 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y96.725 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.850 F10800.000 ; lift Z
G1 X164.096 Y79.716 ; move to first perimeter point
G1 Z4.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X163.174 Y78.618 E0.05904 ; perimeter
G1 X164.390 Y77.598 E0.06535 ; perimeter
G1 X166.619 Y77.598 E0.09185 ; perimeter
G1 X164.142 Y79.677 E0.13324 ; perimeter
M204 S1000 ; adjust acceleration
G1 X163.861 Y80.039 F10800.000 ; move inwards before travel
G1 F8640
G1 X163.174 Y78.618 E-0.33119 ; wipe and retract
G1 X164.390 Y77.598 E-0.36630 ; wipe and retract
G1 X164.660 Y77.598 E-0.06250 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.850 F10800.000 ; lift Z
G1 X85.904 Y79.716 ; move to first perimeter point
G1 Z4.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X83.381 Y77.598 E0.13571 ; perimeter
G1 X85.610 Y77.598 E0.09185 ; perimeter
G1 X86.826 Y78.618 E0.06535 ; perimeter
G1 X85.943 Y79.670 E0.05657 ; perimeter
M204 S1000 ; adjust acceleration
G1 X85.741 Y80.081 F10800.000 ; move inwards before travel
G1 F8640
G1 X83.383 Y77.600 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.850 F10800.000 ; lift Z
G1 X125.000 Y97.642 ; move to first perimeter point
G1 Z4.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.023 Y97.642 E1.89406 ; perimeter
G1 X55.487 Y77.893 E1.26572 ; perimeter
G1 X55.566 Y77.798 E0.00510 ; perimeter
G1 X79.068 Y97.518 E1.26386 ; perimeter
M73 P23 R104
G1 X170.932 Y97.518 E3.78441 ; perimeter
G1 X194.434 Y77.798 E1.26386 ; perimeter
G1 X194.513 Y77.892 E0.00509 ; perimeter
G1 X170.977 Y97.642 E1.26572 ; perimeter
G1 X125.060 Y97.642 E1.89159 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y97.642 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.850 F10800.000 ; lift Z
G1 X125.000 Y84.118 ; move to first perimeter point
G1 Z4.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.614 Y84.118 E1.25177 ; perimeter
G1 X85.899 Y76.805 E0.46869 ; perimeter
G1 X80.762 Y76.805 E0.21162 ; perimeter
G1 X66.465 Y64.809 E0.76884 ; perimeter
G1 X66.545 Y64.714 E0.00509 ; perimeter
G1 X80.807 Y76.682 E0.76698 ; perimeter
G1 X85.944 Y76.682 E0.21162 ; perimeter
G1 X94.659 Y83.995 E0.46869 ; perimeter
G1 X155.341 Y83.995 E2.49982 ; perimeter
G1 X164.056 Y76.682 E0.46869 ; perimeter
G1 X169.193 Y76.682 E0.21162 ; perimeter
G1 X183.456 Y64.714 E0.76698 ; perimeter
G1 X183.535 Y64.809 E0.00509 ; perimeter
G1 X169.238 Y76.805 E0.76884 ; perimeter
G1 X164.101 Y76.805 E0.21162 ; perimeter
G1 X155.386 Y84.118 E0.46869 ; perimeter
G1 X125.060 Y84.118 E1.24929 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y84.118 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.850 F10800.000 ; lift Z
G1 X125.000 Y98.038 ; move to first perimeter point
G1 Z4.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.879 Y98.038 E1.90000 ; perimeter
G1 X54.928 Y77.941 E1.28799 ; perimeter
G1 X66.496 Y64.156 E0.74136 ; perimeter
G1 X80.951 Y76.285 E0.77737 ; perimeter
G1 X86.088 Y76.285 E0.21162 ; perimeter
G1 X94.804 Y83.598 E0.46869 ; perimeter
G1 X155.196 Y83.598 E2.48793 ; perimeter
G1 X163.912 Y76.285 E0.46869 ; perimeter
G1 X169.049 Y76.285 E0.21162 ; perimeter
G1 X183.504 Y64.156 E0.77737 ; perimeter
G1 X195.072 Y77.941 E0.74136 ; perimeter
G1 X171.121 Y98.038 E1.28799 ; perimeter
G1 X125.060 Y98.038 E1.89753 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y98.435 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.734 Y98.435 E1.90595 ; perimeter
G1 X54.395 Y78.011 E1.30892 ; perimeter
G1 X54.617 Y77.696 E0.01589 ; perimeter
G1 X55.009 Y77.228 E0.02515 ; perimeter
G1 X66.200 Y63.892 E0.71720 ; perimeter
G1 X66.472 Y63.618 E0.01589 ; perimeter
G1 X81.095 Y75.889 E0.78641 ; perimeter
G1 X86.232 Y75.889 E0.21162 ; perimeter
G1 X94.948 Y83.202 E0.46869 ; perimeter
G1 X155.052 Y83.202 E2.47605 ; perimeter
G1 X163.768 Y75.889 E0.46869 ; perimeter
G1 X168.905 Y75.889 E0.21162 ; perimeter
G1 X183.528 Y63.618 E0.78641 ; perimeter
G1 X183.800 Y63.892 E0.01589 ; perimeter
G1 X195.383 Y77.696 E0.74235 ; perimeter
G1 X195.605 Y78.011 E0.01589 ; perimeter
G1 X171.266 Y98.435 E1.30892 ; perimeter
G1 X125.060 Y98.435 E1.90347 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.768 Y98.108 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y98.435 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.850 F10800.000 ; lift Z
G1 X124.715 Y135.268 ; move to first perimeter point
G1 Z4.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.927 Y135.268 E1.88626 ; perimeter
G1 X55.740 Y115.811 E1.24695 ; perimeter
G1 X59.456 Y111.382 E0.23819 ; perimeter
G1 X62.252 Y113.728 E0.15032 ; perimeter
G1 X62.595 Y113.318 E0.02204 ; perimeter
G1 X59.800 Y110.972 E0.15032 ; perimeter
G1 X63.211 Y106.907 E0.21861 ; perimeter
G1 X66.007 Y109.253 E0.15032 ; perimeter
G1 X66.351 Y108.843 E0.02205 ; perimeter
G1 X63.555 Y106.497 E0.15032 ; perimeter
G1 X66.129 Y103.430 E0.16494 ; perimeter
G1 X80.332 Y115.348 E0.76382 ; perimeter
G1 X85.469 Y115.348 E0.21162 ; perimeter
G1 X87.099 Y116.715 E0.08762 ; perimeter
G1 X85.668 Y118.420 E0.09169 ; perimeter
G1 X82.749 Y115.971 E0.15696 ; perimeter
G1 X82.405 Y116.381 E0.02205 ; perimeter
G1 X85.324 Y118.830 E0.15696 ; perimeter
G1 X78.648 Y126.787 E0.42789 ; perimeter
G1 X75.729 Y124.338 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.854 Y130.116 E0.15696 ; perimeter
G1 X76.264 Y130.460 E0.02205 ; perimeter
G1 X87.509 Y117.059 E0.72064 ; perimeter
G1 X94.185 Y122.661 E0.35901 ; perimeter
G1 X148.983 Y122.661 E2.25747 ; perimeter
G1 X155.245 Y122.661 E0.25795 ; perimeter
G1 X161.921 Y117.059 E0.35901 ; perimeter
G1 X173.165 Y130.460 E0.72064 ; perimeter
G1 X173.575 Y130.116 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.15696 ; perimeter
G1 X173.701 Y124.338 E0.02205 ; perimeter
G1 X170.782 Y126.787 E0.15696 ; perimeter
G1 X164.106 Y118.830 E0.42789 ; perimeter
G1 X167.024 Y116.381 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X162.331 Y116.715 E0.09169 ; perimeter
G1 X163.960 Y115.348 E0.08762 ; perimeter
G1 X169.097 Y115.348 E0.21162 ; perimeter
G1 X183.301 Y103.430 E0.76382 ; perimeter
G1 X185.874 Y106.497 E0.16494 ; perimeter
G1 X183.079 Y108.843 E0.15032 ; perimeter
G1 X183.423 Y109.253 E0.02205 ; perimeter
G1 X186.218 Y106.907 E0.15032 ; perimeter
G1 X189.629 Y110.972 E0.21861 ; perimeter
G1 X186.834 Y113.318 E0.15032 ; perimeter
G1 X187.178 Y113.728 E0.02205 ; perimeter
G1 X189.973 Y111.382 E0.15032 ; perimeter
G1 X193.690 Y115.811 E0.23819 ; perimeter
G1 X170.503 Y135.268 E1.24695 ; perimeter
G1 X124.775 Y135.268 E1.88379 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y134.871 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.071 Y134.871 E1.88032 ; perimeter
G1 X56.298 Y115.763 E1.22468 ; perimeter
G1 X59.505 Y111.941 E0.20553 ; perimeter
G1 X62.300 Y114.286 E0.15032 ; perimeter
G1 X63.154 Y113.269 E0.05471 ; perimeter
G1 X60.359 Y110.923 E0.15032 ; perimeter
G1 X63.260 Y107.465 E0.18596 ; perimeter
G1 X66.056 Y109.811 E0.15032 ; perimeter
G1 X66.909 Y108.794 E0.05471 ; perimeter
G1 X64.114 Y106.448 E0.15032 ; perimeter
G1 X66.178 Y103.988 E0.13228 ; perimeter
G1 X80.188 Y115.744 E0.75343 ; perimeter
G1 X82.422 Y115.744 E0.09204 ; perimeter
G1 X81.847 Y116.430 E0.03688 ; perimeter
G1 X84.766 Y118.879 E0.15696 ; perimeter
G1 X78.599 Y126.229 E0.39523 ; perimeter
G1 X75.680 Y123.779 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.296 Y130.164 E0.15696 ; perimeter
G1 X76.313 Y131.018 E0.05471 ; perimeter
G1 X87.558 Y117.618 E0.72064 ; perimeter
G1 X94.040 Y123.057 E0.34863 ; perimeter
G1 X148.983 Y123.057 E2.26341 ; perimeter
G1 X155.389 Y123.057 E0.26389 ; perimeter
G1 X161.872 Y117.618 E0.34863 ; perimeter
G1 X173.116 Y131.018 E0.72064 ; perimeter
G1 X174.134 Y130.164 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.15696 ; perimeter
G1 X173.750 Y123.779 E0.05471 ; perimeter
G1 X170.831 Y126.229 E0.15696 ; perimeter
G1 X164.664 Y118.879 E0.39523 ; perimeter
G1 X167.583 Y116.430 E0.15696 ; perimeter
G1 X167.007 Y115.744 E0.03688 ; perimeter
G1 X169.242 Y115.744 E0.09204 ; perimeter
G1 X183.252 Y103.988 E0.75343 ; perimeter
G1 X185.316 Y106.448 E0.13228 ; perimeter
G1 X182.520 Y108.794 E0.15032 ; perimeter
G1 X183.374 Y109.811 E0.05471 ; perimeter
G1 X186.169 Y107.465 E0.15032 ; perimeter
G1 X189.071 Y110.923 E0.18596 ; perimeter
G1 X186.276 Y113.269 E0.15032 ; perimeter
G1 X187.129 Y114.286 E0.05469 ; perimeter
G1 X189.925 Y111.941 E0.15032 ; perimeter
G1 X193.132 Y115.763 E0.20553 ; perimeter
G1 X170.358 Y134.871 E1.22468 ; perimeter
G1 X124.775 Y134.871 E1.87785 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.547 Y135.235 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y134.871 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.850 F10800.000 ; lift Z
G1 X163.810 Y117.862 ; move to first perimeter point
G1 Z4.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q24 S105
M204 S800 ; adjust acceleration
G1 F2400
G1 X162.889 Y116.764 E0.05904 ; perimeter
G1 X164.105 Y115.744 E0.06535 ; perimeter
G1 X166.334 Y115.744 E0.09185 ; perimeter
G1 X163.856 Y117.823 E0.13324 ; perimeter
M204 S1000 ; adjust acceleration
G1 X163.576 Y118.186 F10800.000 ; move inwards before travel
G1 F8640
G1 X162.889 Y116.764 E-0.33119 ; wipe and retract
G1 X164.105 Y115.744 E-0.36630 ; wipe and retract
G1 X164.375 Y115.744 E-0.06250 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.850 F10800.000 ; lift Z
G1 X85.619 Y117.862 ; move to first perimeter point
G1 Z4.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X83.096 Y115.744 E0.13571 ; perimeter
G1 X85.325 Y115.744 E0.09185 ; perimeter
G1 X86.540 Y116.764 E0.06535 ; perimeter
G1 X85.658 Y117.816 E0.05657 ; perimeter
M204 S1000 ; adjust acceleration
G1 X85.456 Y118.227 F10800.000 ; move inwards before travel
G1 F8640
G1 X83.098 Y115.746 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.850 F10800.000 ; lift Z
G1 X124.715 Y135.788 ; move to first perimeter point
G1 Z4.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.738 Y135.788 E1.89406 ; perimeter
G1 X55.201 Y116.039 E1.26572 ; perimeter
G1 X55.281 Y115.944 E0.00510 ; perimeter
G1 X78.783 Y135.664 E1.26386 ; perimeter
G1 X170.647 Y135.664 E3.78441 ; perimeter
G1 X194.149 Y115.944 E1.26386 ; perimeter
G1 X194.228 Y116.039 E0.00509 ; perimeter
G1 X170.692 Y135.788 E1.26572 ; perimeter
G1 X124.775 Y135.788 E1.89159 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y135.788 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.850 F10800.000 ; lift Z
G1 X124.715 Y122.265 ; move to first perimeter point
G1 Z4.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.329 Y122.265 E1.25177 ; perimeter
G1 X85.614 Y114.952 E0.46869 ; perimeter
G1 X80.477 Y114.952 E0.21162 ; perimeter
G1 X66.180 Y102.955 E0.76884 ; perimeter
G1 X66.259 Y102.860 E0.00509 ; perimeter
G1 X80.522 Y114.828 E0.76698 ; perimeter
G1 X85.659 Y114.828 E0.21162 ; perimeter
G1 X94.374 Y122.141 E0.46869 ; perimeter
G1 X155.056 Y122.141 E2.49982 ; perimeter
G1 X163.771 Y114.828 E0.46869 ; perimeter
G1 X168.908 Y114.828 E0.21162 ; perimeter
G1 X183.170 Y102.860 E0.76698 ; perimeter
G1 X183.250 Y102.955 E0.00509 ; perimeter
G1 X168.953 Y114.952 E0.76884 ; perimeter
G1 X163.816 Y114.952 E0.21162 ; perimeter
G1 X155.101 Y122.265 E0.46869 ; perimeter
G1 X124.775 Y122.265 E1.24929 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y122.265 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.850 F10800.000 ; lift Z
G1 X124.715 Y136.184 ; move to first perimeter point
G1 Z4.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.593 Y136.184 E1.90000 ; perimeter
G1 X54.643 Y116.088 E1.28799 ; perimeter
G1 X66.211 Y102.302 E0.74136 ; perimeter
G1 X80.666 Y114.431 E0.77737 ; perimeter
G1 X85.803 Y114.431 E0.21162 ; perimeter
G1 X94.518 Y121.744 E0.46869 ; perimeter
G1 X154.911 Y121.744 E2.48793 ; perimeter
G1 X163.627 Y114.431 E0.46869 ; perimeter
G1 X168.764 Y114.431 E0.21162 ; perimeter
G1 X183.219 Y102.302 E0.77737 ; perimeter
G1 X194.787 Y116.088 E0.74136 ; perimeter
G1 X170.836 Y136.184 E1.28799 ; perimeter
G1 X124.775 Y136.184 E1.89753 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y136.581 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.449 Y136.581 E1.90595 ; perimeter
G1 X54.110 Y116.157 E1.30892 ; perimeter
G1 X54.332 Y115.842 E0.01589 ; perimeter
G1 X54.724 Y115.374 E0.02515 ; perimeter
G1 X65.915 Y102.038 E0.71720 ; perimeter
G1 X66.187 Y101.764 E0.01589 ; perimeter
G1 X80.810 Y114.035 E0.78641 ; perimeter
G1 X85.947 Y114.035 E0.21162 ; perimeter
G1 X94.663 Y121.348 E0.46869 ; perimeter
G1 X154.767 Y121.348 E2.47605 ; perimeter
G1 X163.482 Y114.035 E0.46869 ; perimeter
G1 X168.619 Y114.035 E0.21162 ; perimeter
M73 P24 R103
G1 X183.243 Y101.764 E0.78641 ; perimeter
G1 X183.515 Y102.038 E0.01589 ; perimeter
G1 X195.098 Y115.842 E0.74235 ; perimeter
G1 X195.320 Y116.157 E0.01589 ; perimeter
G1 X170.980 Y136.581 E1.30892 ; perimeter
G1 X124.775 Y136.581 E1.90347 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.483 Y136.255 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;4.5


G1 F8640
G1 X121.483 Y136.581 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z4.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;4.5
G1 X125.000 Y97.297 ; move to first perimeter point
G1 Z4.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.149 Y97.297 E1.88889 ; perimeter
G1 X55.778 Y77.687 E1.25679 ; perimeter
G1 X59.607 Y73.124 E0.24540 ; perimeter
G1 X62.398 Y75.465 E0.15005 ; perimeter
G1 X62.742 Y75.055 E0.02205 ; perimeter
G1 X59.951 Y72.714 E0.15005 ; perimeter
G1 X63.362 Y68.648 E0.21861 ; perimeter
G1 X66.153 Y70.990 E0.15005 ; perimeter
G1 X66.497 Y70.580 E0.02205 ; perimeter
G1 X63.707 Y68.238 E0.15005 ; perimeter
G1 X66.393 Y65.037 E0.17215 ; perimeter
G1 X80.681 Y77.027 E0.76840 ; perimeter
G1 X85.818 Y77.027 E0.21162 ; perimeter
G1 X87.496 Y78.435 E0.09025 ; perimeter
G1 X85.953 Y80.274 E0.09890 ; perimeter
G1 X83.035 Y77.825 E0.15696 ; perimeter
G1 X82.691 Y78.235 E0.02205 ; perimeter
G1 X85.609 Y80.684 E0.15696 ; perimeter
G1 X78.933 Y88.641 E0.42789 ; perimeter
G1 X76.014 Y86.192 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.140 Y91.969 E0.15696 ; perimeter
G1 X76.550 Y92.314 E0.02205 ; perimeter
G1 X87.907 Y78.779 E0.72785 ; perimeter
G1 X94.534 Y84.340 E0.35639 ; perimeter
G1 X148.637 Y84.340 E2.22882 ; perimeter
G1 X155.466 Y84.340 E0.28135 ; perimeter
G1 X162.093 Y78.779 E0.35639 ; perimeter
G1 X173.450 Y92.314 E0.72785 ; perimeter
G1 X173.860 Y91.969 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.15696 ; perimeter
G1 X173.986 Y86.192 E0.02205 ; perimeter
G1 X171.067 Y88.641 E0.15696 ; perimeter
G1 X164.391 Y80.684 E0.42789 ; perimeter
G1 X167.309 Y78.235 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X162.504 Y78.435 E0.09890 ; perimeter
G1 X164.182 Y77.027 E0.09025 ; perimeter
G1 X169.319 Y77.027 E0.21162 ; perimeter
G1 X183.607 Y65.037 E0.76840 ; perimeter
G1 X186.293 Y68.238 E0.17215 ; perimeter
G1 X183.503 Y70.580 E0.15005 ; perimeter
G1 X183.847 Y70.990 E0.02205 ; perimeter
G1 X186.638 Y68.648 E0.15005 ; perimeter
G1 X190.049 Y72.714 E0.21861 ; perimeter
G1 X187.258 Y75.055 E0.15005 ; perimeter
G1 X187.602 Y75.465 E0.02205 ; perimeter
G1 X190.393 Y73.124 E0.15005 ; perimeter
G1 X194.222 Y77.687 E0.24540 ; perimeter
G1 X170.851 Y97.297 E1.25679 ; perimeter
G1 X125.060 Y97.297 E1.88641 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y96.900 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.293 Y96.900 E1.88294 ; perimeter
G1 X56.337 Y77.638 E1.23452 ; perimeter
G1 X59.656 Y73.682 E0.21274 ; perimeter
G1 X62.446 Y76.023 E0.15005 ; perimeter
G1 X63.284 Y75.025 E0.05367 ; perimeter
G1 X63.300 Y75.006 E0.00104 ; perimeter
G1 X60.510 Y72.665 E0.15005 ; perimeter
G1 X63.411 Y69.207 E0.18596 ; perimeter
G1 X66.202 Y71.548 E0.15005 ; perimeter
G1 X67.055 Y70.531 E0.05471 ; perimeter
G1 X64.265 Y68.189 E0.15005 ; perimeter
G1 X66.441 Y65.596 E0.13949 ; perimeter
G1 X80.537 Y77.423 E0.75802 ; perimeter
G1 X82.854 Y77.423 E0.09547 ; perimeter
G1 X82.132 Y78.284 E0.04629 ; perimeter
G1 X85.051 Y80.733 E0.15696 ; perimeter
G1 X78.884 Y88.082 E0.39523 ; perimeter
G1 X75.965 Y85.633 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.581 Y92.018 E0.15696 ; perimeter
G1 X76.599 Y92.872 E0.05471 ; perimeter
G1 X87.955 Y79.337 E0.72785 ; perimeter
G1 X94.389 Y84.736 E0.34600 ; perimeter
G1 X148.637 Y84.736 E2.23476 ; perimeter
G1 X155.611 Y84.736 E0.28729 ; perimeter
G1 X162.045 Y79.337 E0.34600 ; perimeter
G1 X173.401 Y92.872 E0.72785 ; perimeter
G1 X174.419 Y92.018 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.15696 ; perimeter
G1 X174.035 Y85.633 E0.05471 ; perimeter
G1 X171.116 Y88.082 E0.15696 ; perimeter
G1 X164.949 Y80.733 E0.39523 ; perimeter
G1 X167.868 Y78.284 E0.15696 ; perimeter
G1 X167.146 Y77.423 E0.04629 ; perimeter
G1 X169.463 Y77.423 E0.09547 ; perimeter
G1 X183.559 Y65.596 E0.75802 ; perimeter
G1 X185.735 Y68.189 E0.13949 ; perimeter
G1 X182.945 Y70.531 E0.15005 ; perimeter
G1 X183.798 Y71.548 E0.05471 ; perimeter
G1 X186.589 Y69.207 E0.15005 ; perimeter
G1 X189.490 Y72.665 E0.18596 ; perimeter
G1 X186.700 Y75.006 E0.15005 ; perimeter
G1 X186.716 Y75.025 E0.00104 ; perimeter
G1 X187.554 Y76.023 E0.05367 ; perimeter
G1 X190.344 Y73.682 E0.15005 ; perimeter
G1 X193.663 Y77.638 E0.21274 ; perimeter
G1 X170.707 Y96.900 E1.23452 ; perimeter
G1 X125.060 Y96.900 E1.88047 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.832 Y97.264 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y96.900 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.100 F10800.000 ; lift Z
G1 X164.096 Y79.716 ; move to first perimeter point
G1 Z4.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X163.062 Y78.484 E0.06625 ; perimeter
G1 X164.326 Y77.423 E0.06798 ; perimeter
G1 X166.828 Y77.423 E0.10306 ; perimeter
G1 X164.142 Y79.677 E0.14446 ; perimeter
M204 S1000 ; adjust acceleration
G1 X163.865 Y80.042 F10800.000 ; move inwards before travel
G1 F8640
G1 X163.062 Y78.484 E-0.37158 ; wipe and retract
G1 X164.326 Y77.423 E-0.38101 ; wipe and retract
G1 X164.358 Y77.423 E-0.00740 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.100 F10800.000 ; lift Z
G1 X85.904 Y79.716 ; move to first perimeter point
G1 Z4.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X83.172 Y77.423 E0.14693 ; perimeter
G1 X85.674 Y77.423 E0.10306 ; perimeter
G1 X86.938 Y78.484 E0.06798 ; perimeter
G1 X85.943 Y79.670 E0.06378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X85.737 Y80.079 F10800.000 ; move inwards before travel
G1 F8640
G1 X83.386 Y77.597 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.100 F10800.000 ; lift Z
G1 X125.000 Y83.943 ; move to first perimeter point
G1 Z4.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.678 Y83.943 E1.24914 ; perimeter
G1 X85.963 Y76.630 E0.46869 ; perimeter
G1 X80.826 Y76.630 E0.21162 ; perimeter
G1 X66.443 Y64.562 E0.77343 ; perimeter
G1 X66.523 Y64.467 E0.00510 ; perimeter
G1 X80.871 Y76.506 E0.77157 ; perimeter
G1 X86.008 Y76.506 E0.21162 ; perimeter
G1 X94.723 Y83.820 E0.46869 ; perimeter
G1 X155.277 Y83.820 E2.49457 ; perimeter
G1 X163.992 Y76.506 E0.46869 ; perimeter
G1 X169.129 Y76.506 E0.21162 ; perimeter
G1 X183.477 Y64.467 E0.77157 ; perimeter
G1 X183.557 Y64.562 E0.00510 ; perimeter
G1 X169.174 Y76.630 E0.77343 ; perimeter
G1 X164.037 Y76.630 E0.21162 ; perimeter
G1 X155.322 Y83.943 E0.46869 ; perimeter
G1 X125.060 Y83.943 E1.24667 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y83.943 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.100 F10800.000 ; lift Z
G1 X125.000 Y97.817 ; move to first perimeter point
G1 Z4.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.959 Y97.817 E1.89669 ; perimeter
G1 X55.240 Y77.914 E1.27555 ; perimeter
G1 X55.320 Y77.819 E0.00510 ; perimeter
G1 X79.004 Y97.693 E1.27370 ; perimeter
G1 X170.996 Y97.693 E3.78966 ; perimeter
G1 X194.680 Y77.819 E1.27370 ; perimeter
G1 X194.760 Y77.914 E0.00510 ; perimeter
G1 X171.041 Y97.817 E1.27555 ; perimeter
G1 X125.060 Y97.817 E1.89421 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y98.213 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.815 Y98.213 E1.90263 ; perimeter
G1 X54.690 Y77.970 E1.29737 ; perimeter
G1 X66.483 Y63.916 E0.75578 ; perimeter
G1 X81.015 Y76.110 E0.78150 ; perimeter
G1 X86.152 Y76.110 E0.21162 ; perimeter
G1 X94.867 Y83.423 E0.46869 ; perimeter
G1 X155.133 Y83.423 E2.48268 ; perimeter
G1 X163.848 Y76.110 E0.46869 ; perimeter
G1 X168.985 Y76.110 E0.21162 ; perimeter
G1 X183.517 Y63.916 E0.78150 ; perimeter
G1 X195.310 Y77.970 E0.75578 ; perimeter
G1 X171.185 Y98.213 E1.29737 ; perimeter
G1 X125.060 Y98.213 E1.90016 ; perimeter
M73 Q24 S104
M204 S1000 ; adjust acceleration
G1 X125.000 Y98.610 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.671 Y98.610 E1.90857 ; perimeter
G1 X54.180 Y78.060 E1.31704 ; perimeter
G1 X54.297 Y77.835 E0.01044 ; perimeter
G1 X54.483 Y77.583 E0.01287 ; perimeter
G1 X66.066 Y63.779 E0.74234 ; perimeter
G1 X66.281 Y63.553 E0.01288 ; perimeter
G1 X66.482 Y63.398 E0.01044 ; perimeter
G1 X81.159 Y75.714 E0.78929 ; perimeter
G1 X86.296 Y75.714 E0.21162 ; perimeter
G1 X95.012 Y83.027 E0.46869 ; perimeter
G1 X154.988 Y83.027 E2.47080 ; perimeter
G1 X163.704 Y75.714 E0.46869 ; perimeter
G1 X168.841 Y75.714 E0.21162 ; perimeter
G1 X183.525 Y63.393 E0.78966 ; perimeter
G1 X183.716 Y63.550 E0.01022 ; perimeter
G1 X183.934 Y63.779 E0.01303 ; perimeter
G1 X195.517 Y77.583 E0.74234 ; perimeter
G1 X195.703 Y77.835 E0.01288 ; perimeter
G1 X195.820 Y78.060 E0.01044 ; perimeter
G1 X171.329 Y98.610 E1.31704 ; perimeter
G1 X125.060 Y98.610 E1.90610 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.768 Y98.284 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y98.610 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.100 F10800.000 ; lift Z
G1 X124.715 Y135.443 ; move to first perimeter point
G1 Z4.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.863 Y135.443 E1.88889 ; perimeter
G1 X55.493 Y115.833 E1.25679 ; perimeter
G1 X59.322 Y111.270 E0.24540 ; perimeter
G1 X62.112 Y113.611 E0.15005 ; perimeter
G1 X62.456 Y113.201 E0.02205 ; perimeter
G1 X59.666 Y110.860 E0.15005 ; perimeter
G1 X63.077 Y106.795 E0.21861 ; perimeter
G1 X65.868 Y109.136 E0.15005 ; perimeter
G1 X66.212 Y108.726 E0.02205 ; perimeter
G1 X63.421 Y106.384 E0.15005 ; perimeter
G1 X66.107 Y103.183 E0.17215 ; perimeter
G1 X80.396 Y115.173 E0.76840 ; perimeter
G1 X85.533 Y115.173 E0.21162 ; perimeter
G1 X87.211 Y116.581 E0.09025 ; perimeter
G1 X85.668 Y118.420 E0.09890 ; perimeter
G1 X82.749 Y115.971 E0.15696 ; perimeter
G1 X82.405 Y116.381 E0.02205 ; perimeter
G1 X85.324 Y118.830 E0.15696 ; perimeter
G1 X78.648 Y126.787 E0.42789 ; perimeter
G1 X75.729 Y124.338 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.854 Y130.116 E0.15696 ; perimeter
G1 X76.264 Y130.460 E0.02205 ; perimeter
G1 X87.621 Y116.925 E0.72785 ; perimeter
G1 X94.248 Y122.486 E0.35639 ; perimeter
G1 X148.352 Y122.486 E2.22882 ; perimeter
G1 X155.181 Y122.486 E0.28135 ; perimeter
G1 X161.808 Y116.925 E0.35639 ; perimeter
G1 X173.165 Y130.460 E0.72785 ; perimeter
G1 X173.575 Y130.116 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.15696 ; perimeter
G1 X173.701 Y124.338 E0.02205 ; perimeter
G1 X170.782 Y126.787 E0.15696 ; perimeter
G1 X164.106 Y118.830 E0.42789 ; perimeter
G1 X167.024 Y116.381 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X162.218 Y116.581 E0.09890 ; perimeter
G1 X163.897 Y115.173 E0.09025 ; perimeter
G1 X169.034 Y115.173 E0.21162 ; perimeter
G1 X183.322 Y103.183 E0.76840 ; perimeter
G1 X186.008 Y106.384 E0.17215 ; perimeter
G1 X183.218 Y108.726 E0.15005 ; perimeter
G1 X183.562 Y109.136 E0.02205 ; perimeter
G1 X186.352 Y106.795 E0.15005 ; perimeter
G1 X189.763 Y110.860 E0.21861 ; perimeter
G1 X186.973 Y113.201 E0.15005 ; perimeter
G1 X187.317 Y113.611 E0.02205 ; perimeter
G1 X190.108 Y111.270 E0.15005 ; perimeter
G1 X193.937 Y115.833 E0.24540 ; perimeter
G1 X170.566 Y135.443 E1.25679 ; perimeter
G1 X124.775 Y135.443 E1.88641 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y135.047 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.008 Y135.047 E1.88294 ; perimeter
G1 X56.052 Y115.784 E1.23452 ; perimeter
G1 X59.371 Y111.828 E0.21274 ; perimeter
G1 X62.161 Y114.169 E0.15005 ; perimeter
G1 X62.999 Y113.171 E0.05367 ; perimeter
G1 X63.015 Y113.152 E0.00104 ; perimeter
G1 X60.225 Y110.811 E0.15005 ; perimeter
G1 X63.126 Y107.353 E0.18596 ; perimeter
G1 X65.916 Y109.694 E0.15005 ; perimeter
G1 X66.770 Y108.677 E0.05471 ; perimeter
G1 X63.980 Y106.336 E0.15005 ; perimeter
G1 X66.156 Y103.742 E0.13949 ; perimeter
G1 X80.252 Y115.569 E0.75802 ; perimeter
G1 X82.569 Y115.569 E0.09547 ; perimeter
G1 X81.847 Y116.430 E0.04629 ; perimeter
G1 X84.766 Y118.879 E0.15696 ; perimeter
G1 X78.599 Y126.229 E0.39523 ; perimeter
G1 X75.680 Y123.779 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.296 Y130.164 E0.15696 ; perimeter
G1 X76.313 Y131.018 E0.05471 ; perimeter
G1 X87.670 Y117.483 E0.72785 ; perimeter
G1 X94.104 Y122.882 E0.34600 ; perimeter
G1 X148.352 Y122.882 E2.23476 ; perimeter
G1 X155.325 Y122.882 E0.28729 ; perimeter
G1 X161.759 Y117.483 E0.34600 ; perimeter
G1 X173.116 Y131.018 E0.72785 ; perimeter
G1 X174.134 Y130.164 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.15696 ; perimeter
M73 P25 R102
G1 X173.750 Y123.779 E0.05471 ; perimeter
G1 X170.831 Y126.229 E0.15696 ; perimeter
G1 X164.664 Y118.879 E0.39523 ; perimeter
G1 X167.583 Y116.430 E0.15696 ; perimeter
G1 X166.860 Y115.569 E0.04629 ; perimeter
G1 X169.178 Y115.569 E0.09547 ; perimeter
G1 X183.273 Y103.742 E0.75802 ; perimeter
G1 X185.450 Y106.336 E0.13949 ; perimeter
G1 X182.660 Y108.677 E0.15005 ; perimeter
G1 X183.513 Y109.694 E0.05471 ; perimeter
G1 X186.304 Y107.353 E0.15005 ; perimeter
G1 X189.205 Y110.811 E0.18596 ; perimeter
G1 X186.415 Y113.152 E0.15005 ; perimeter
G1 X186.431 Y113.171 E0.00104 ; perimeter
G1 X187.268 Y114.169 E0.05367 ; perimeter
G1 X190.059 Y111.828 E0.15005 ; perimeter
G1 X193.378 Y115.784 E0.21274 ; perimeter
G1 X170.422 Y135.047 E1.23452 ; perimeter
G1 X124.775 Y135.047 E1.88047 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.547 Y135.410 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y135.047 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.100 F10800.000 ; lift Z
G1 X163.810 Y117.862 ; move to first perimeter point
G1 Z4.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X162.777 Y116.630 E0.06625 ; perimeter
G1 X164.041 Y115.569 E0.06798 ; perimeter
G1 X166.543 Y115.569 E0.10306 ; perimeter
G1 X163.856 Y117.823 E0.14446 ; perimeter
M204 S1000 ; adjust acceleration
G1 X163.580 Y118.188 F10800.000 ; move inwards before travel
G1 F8640
G1 X162.777 Y116.630 E-0.37158 ; wipe and retract
G1 X164.041 Y115.569 E-0.38101 ; wipe and retract
G1 X164.073 Y115.569 E-0.00740 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.100 F10800.000 ; lift Z
G1 X85.619 Y117.862 ; move to first perimeter point
G1 Z4.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X82.887 Y115.569 E0.14693 ; perimeter
G1 X85.389 Y115.569 E0.10306 ; perimeter
G1 X86.653 Y116.630 E0.06798 ; perimeter
G1 X85.658 Y117.816 E0.06378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X85.452 Y118.225 F10800.000 ; move inwards before travel
G1 F8640
G1 X83.101 Y115.743 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.100 F10800.000 ; lift Z
G1 X124.715 Y122.090 ; move to first perimeter point
G1 Z4.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.393 Y122.090 E1.24914 ; perimeter
G1 X85.677 Y114.776 E0.46869 ; perimeter
G1 X80.540 Y114.776 E0.21162 ; perimeter
G1 X66.158 Y102.709 E0.77343 ; perimeter
G1 X66.238 Y102.614 E0.00510 ; perimeter
G1 X80.585 Y114.653 E0.77157 ; perimeter
G1 X85.722 Y114.653 E0.21162 ; perimeter
G1 X94.438 Y121.966 E0.46869 ; perimeter
G1 X154.992 Y121.966 E2.49457 ; perimeter
G1 X163.707 Y114.653 E0.46869 ; perimeter
G1 X168.844 Y114.653 E0.21162 ; perimeter
G1 X183.192 Y102.614 E0.77157 ; perimeter
G1 X183.271 Y102.709 E0.00510 ; perimeter
G1 X168.889 Y114.776 E0.77343 ; perimeter
G1 X163.752 Y114.776 E0.21162 ; perimeter
G1 X155.037 Y122.090 E0.46869 ; perimeter
G1 X124.775 Y122.090 E1.24667 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y122.090 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.100 F10800.000 ; lift Z
G1 X124.715 Y135.963 ; move to first perimeter point
G1 Z4.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.674 Y135.963 E1.89669 ; perimeter
G1 X54.955 Y116.060 E1.27555 ; perimeter
G1 X55.034 Y115.965 E0.00510 ; perimeter
G1 X78.719 Y135.839 E1.27370 ; perimeter
G1 X170.711 Y135.839 E3.78966 ; perimeter
G1 X194.395 Y115.965 E1.27370 ; perimeter
G1 X194.475 Y116.060 E0.00510 ; perimeter
G1 X170.756 Y135.963 E1.27555 ; perimeter
G1 X124.775 Y135.963 E1.89421 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y136.359 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.530 Y136.359 E1.90263 ; perimeter
G1 X54.405 Y116.116 E1.29737 ; perimeter
G1 X66.198 Y102.062 E0.75578 ; perimeter
G1 X80.730 Y114.256 E0.78150 ; perimeter
G1 X85.867 Y114.256 E0.21162 ; perimeter
G1 X94.582 Y121.569 E0.46869 ; perimeter
G1 X154.848 Y121.569 E2.48268 ; perimeter
G1 X163.563 Y114.256 E0.46869 ; perimeter
G1 X168.700 Y114.256 E0.21162 ; perimeter
G1 X183.232 Y102.062 E0.78150 ; perimeter
G1 X195.025 Y116.116 E0.75578 ; perimeter
G1 X170.900 Y136.359 E1.29737 ; perimeter
G1 X124.775 Y136.359 E1.90016 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y136.756 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.385 Y136.756 E1.90857 ; perimeter
G1 X53.895 Y116.206 E1.31704 ; perimeter
G1 X54.012 Y115.981 E0.01044 ; perimeter
G1 X54.198 Y115.729 E0.01287 ; perimeter
G1 X65.781 Y101.925 E0.74234 ; perimeter
G1 X65.996 Y101.699 E0.01288 ; perimeter
G1 X66.197 Y101.544 E0.01044 ; perimeter
G1 X80.874 Y113.860 E0.78929 ; perimeter
G1 X86.011 Y113.860 E0.21162 ; perimeter
G1 X94.726 Y121.173 E0.46869 ; perimeter
G1 X154.703 Y121.173 E2.47080 ; perimeter
G1 X163.419 Y113.860 E0.46869 ; perimeter
G1 X168.556 Y113.860 E0.21162 ; perimeter
G1 X183.240 Y101.539 E0.78966 ; perimeter
G1 X183.431 Y101.697 E0.01022 ; perimeter
G1 X183.649 Y101.925 E0.01303 ; perimeter
G1 X195.232 Y115.729 E0.74234 ; perimeter
G1 X195.417 Y115.981 E0.01288 ; perimeter
G1 X195.535 Y116.206 E0.01044 ; perimeter
G1 X171.044 Y136.756 E1.31704 ; perimeter
G1 X124.775 Y136.756 E1.90610 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.483 Y136.430 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;4.75


G1 F8640
G1 X121.483 Y136.756 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;4.75
G1 X125.000 Y97.472 ; move to first perimeter point
G1 Z4.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.085 Y97.472 E1.89151 ; perimeter
G1 X55.532 Y77.708 E1.26662 ; perimeter
G1 X59.473 Y73.011 E0.25261 ; perimeter
G1 X62.258 Y75.348 E0.14978 ; perimeter
G1 X62.603 Y74.938 E0.02205 ; perimeter
G1 X59.817 Y72.601 E0.14978 ; perimeter
G1 X63.228 Y68.536 E0.21861 ; perimeter
G1 X66.014 Y70.873 E0.14978 ; perimeter
G1 X66.358 Y70.463 E0.02205 ; perimeter
G1 X63.572 Y68.126 E0.14978 ; perimeter
G1 X66.371 Y64.791 E0.17936 ; perimeter
G1 X80.745 Y76.852 E0.77299 ; perimeter
G1 X85.882 Y76.852 E0.21162 ; perimeter
G1 X87.609 Y78.301 E0.09287 ; perimeter
G1 X85.953 Y80.274 E0.10612 ; perimeter
G1 X83.035 Y77.825 E0.15696 ; perimeter
G1 X82.691 Y78.235 E0.02205 ; perimeter
G1 X85.609 Y80.684 E0.15696 ; perimeter
G1 X78.933 Y88.641 E0.42789 ; perimeter
G1 X76.014 Y86.192 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.140 Y91.969 E0.15696 ; perimeter
G1 X76.550 Y92.314 E0.02205 ; perimeter
G1 X88.019 Y78.645 E0.73506 ; perimeter
G1 X94.597 Y84.165 E0.35376 ; perimeter
G1 X148.005 Y84.165 E2.20016 ; perimeter
G1 X155.403 Y84.165 E0.30476 ; perimeter
G1 X161.981 Y78.645 E0.35376 ; perimeter
G1 X173.450 Y92.314 E0.73506 ; perimeter
G1 X173.860 Y91.969 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.15696 ; perimeter
G1 X173.986 Y86.192 E0.02205 ; perimeter
G1 X171.067 Y88.641 E0.15696 ; perimeter
G1 X164.391 Y80.684 E0.42789 ; perimeter
G1 X167.309 Y78.235 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X162.391 Y78.301 E0.10612 ; perimeter
G1 X164.118 Y76.852 E0.09287 ; perimeter
G1 X169.255 Y76.852 E0.21162 ; perimeter
G1 X183.629 Y64.790 E0.77299 ; perimeter
G1 X186.428 Y68.126 E0.17936 ; perimeter
G1 X183.642 Y70.463 E0.14978 ; perimeter
G1 X183.986 Y70.873 E0.02205 ; perimeter
G1 X186.772 Y68.536 E0.14978 ; perimeter
G1 X190.183 Y72.601 E0.21861 ; perimeter
G1 X187.397 Y74.938 E0.14978 ; perimeter
G1 X187.742 Y75.348 E0.02205 ; perimeter
G1 X190.527 Y73.011 E0.14978 ; perimeter
G1 X194.468 Y77.708 E0.25261 ; perimeter
G1 X170.915 Y97.472 E1.26662 ; perimeter
G1 X125.060 Y97.472 E1.88904 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y97.075 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.229 Y97.075 E1.88557 ; perimeter
G1 X56.090 Y77.660 E1.24435 ; perimeter
M73 Q25 S103
G1 X59.522 Y73.569 E0.21995 ; perimeter
G1 X62.307 Y75.907 E0.14978 ; perimeter
G1 X63.129 Y74.928 E0.05265 ; perimeter
G1 X63.161 Y74.889 E0.00206 ; perimeter
G1 X60.376 Y72.552 E0.14978 ; perimeter
G1 X63.277 Y69.094 E0.18596 ; perimeter
G1 X66.062 Y71.431 E0.14978 ; perimeter
G1 X66.884 Y70.452 E0.05265 ; perimeter
G1 X66.916 Y70.414 E0.00206 ; perimeter
G1 X64.131 Y68.077 E0.14978 ; perimeter
G1 X66.420 Y65.349 E0.14671 ; perimeter
G1 X80.601 Y77.248 E0.76260 ; perimeter
G1 X85.738 Y77.248 E0.21162 ; perimeter
G1 X87.051 Y78.350 E0.07060 ; perimeter
G1 X85.904 Y79.716 E0.07346 ; perimeter
G1 X82.986 Y77.267 E0.15696 ; perimeter
G1 X82.132 Y78.284 E0.05471 ; perimeter
G1 X85.051 Y80.733 E0.15696 ; perimeter
G1 X78.884 Y88.082 E0.39523 ; perimeter
G1 X75.965 Y85.633 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.581 Y92.018 E0.15696 ; perimeter
G1 X76.599 Y92.872 E0.05471 ; perimeter
G1 X88.068 Y79.203 E0.73506 ; perimeter
G1 X94.453 Y84.561 E0.34338 ; perimeter
G1 X148.005 Y84.561 E2.20611 ; perimeter
G1 X155.547 Y84.561 E0.31070 ; perimeter
G1 X161.932 Y79.203 E0.34338 ; perimeter
G1 X173.401 Y92.872 E0.73506 ; perimeter
G1 X174.419 Y92.018 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.15696 ; perimeter
G1 X174.035 Y85.633 E0.05471 ; perimeter
G1 X171.116 Y88.082 E0.15696 ; perimeter
G1 X164.949 Y80.733 E0.39523 ; perimeter
G1 X167.868 Y78.284 E0.15696 ; perimeter
G1 X167.014 Y77.267 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X162.949 Y78.350 E0.07346 ; perimeter
G1 X164.262 Y77.248 E0.07060 ; perimeter
G1 X169.399 Y77.248 E0.21162 ; perimeter
G1 X183.580 Y65.349 E0.76260 ; perimeter
G1 X185.869 Y68.077 E0.14671 ; perimeter
G1 X183.084 Y70.414 E0.14978 ; perimeter
G1 X183.116 Y70.452 E0.00206 ; perimeter
G1 X183.938 Y71.431 E0.05265 ; perimeter
G1 X186.723 Y69.094 E0.14978 ; perimeter
G1 X189.624 Y72.552 E0.18596 ; perimeter
G1 X186.839 Y74.889 E0.14978 ; perimeter
G1 X186.871 Y74.928 E0.00206 ; perimeter
G1 X187.693 Y75.907 E0.05265 ; perimeter
G1 X190.478 Y73.569 E0.14978 ; perimeter
G1 X193.910 Y77.660 E0.21995 ; perimeter
G1 X170.771 Y97.075 E1.24435 ; perimeter
G1 X125.060 Y97.075 E1.88310 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.833 Y97.439 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y97.075 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.350 F10800.000 ; lift Z
G1 X125.000 Y83.768 ; move to first perimeter point
G1 Z4.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.742 Y83.768 E1.24652 ; perimeter
G1 X86.026 Y76.455 E0.46869 ; perimeter
G1 X80.889 Y76.455 E0.21162 ; perimeter
G1 X66.422 Y64.316 E0.77801 ; perimeter
G1 X66.504 Y64.223 E0.00511 ; perimeter
G1 X80.934 Y76.331 E0.77600 ; perimeter
G1 X86.071 Y76.331 E0.21162 ; perimeter
G1 X94.787 Y83.645 E0.46869 ; perimeter
G1 X155.213 Y83.645 E2.48932 ; perimeter
G1 X163.929 Y76.331 E0.46869 ; perimeter
G1 X169.066 Y76.331 E0.21162 ; perimeter
G1 X183.498 Y64.221 E0.77616 ; perimeter
G1 X183.578 Y64.316 E0.00510 ; perimeter
G1 X169.111 Y76.455 E0.77801 ; perimeter
G1 X163.974 Y76.455 E0.21162 ; perimeter
G1 X155.258 Y83.768 E0.46869 ; perimeter
G1 X125.060 Y83.768 E1.24404 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y83.768 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.350 F10800.000 ; lift Z
G1 X125.000 Y97.992 ; move to first perimeter point
G1 Z4.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.895 Y97.992 E1.89931 ; perimeter
G1 X54.993 Y77.936 E1.28539 ; perimeter
G1 X55.073 Y77.841 E0.00510 ; perimeter
G1 X78.941 Y97.868 E1.28353 ; perimeter
G1 X171.059 Y97.868 E3.79491 ; perimeter
G1 X194.927 Y77.841 E1.28353 ; perimeter
G1 X195.007 Y77.936 E0.00510 ; perimeter
G1 X171.105 Y97.992 E1.28539 ; perimeter
G1 X125.060 Y97.992 E1.89684 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y98.388 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.751 Y98.388 E1.90525 ; perimeter
G1 X54.458 Y78.004 E1.30641 ; perimeter
G1 X54.661 Y77.716 E0.01452 ; perimeter
G1 X66.152 Y64.021 E0.73647 ; perimeter
G1 X66.476 Y63.682 E0.01932 ; perimeter
G1 X81.079 Y75.935 E0.78529 ; perimeter
G1 X86.216 Y75.935 E0.21162 ; perimeter
G1 X94.931 Y83.248 E0.46869 ; perimeter
G1 X155.069 Y83.248 E2.47743 ; perimeter
G1 X163.784 Y75.935 E0.46869 ; perimeter
G1 X168.921 Y75.935 E0.21162 ; perimeter
G1 X183.523 Y63.682 E0.78526 ; perimeter
G1 X183.773 Y63.931 E0.01452 ; perimeter
G1 X195.339 Y77.716 E0.74128 ; perimeter
M73 P25 R101
G1 X195.542 Y78.004 E0.01452 ; perimeter
G1 X171.249 Y98.388 E1.30641 ; perimeter
G1 X125.060 Y98.388 E1.90278 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y98.785 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.607 Y98.785 E1.91120 ; perimeter
G1 X53.964 Y78.107 E1.32525 ; perimeter
G1 X54.158 Y77.730 E0.01747 ; perimeter
G1 X54.349 Y77.471 E0.01324 ; perimeter
G1 X65.854 Y63.759 E0.73738 ; perimeter
G1 X66.155 Y63.433 E0.01826 ; perimeter
G1 X66.491 Y63.177 E0.01740 ; perimeter
G1 X81.223 Y75.539 E0.79224 ; perimeter
G1 X86.360 Y75.539 E0.21162 ; perimeter
G1 X95.075 Y82.852 E0.46869 ; perimeter
G1 X154.925 Y82.852 E2.46555 ; perimeter
G1 X163.640 Y75.539 E0.46869 ; perimeter
G1 X168.777 Y75.539 E0.21162 ; perimeter
G1 X183.510 Y63.177 E0.79227 ; perimeter
G1 X183.847 Y63.435 E0.01750 ; perimeter
G1 X184.068 Y63.667 E0.01321 ; perimeter
G1 X195.651 Y77.471 E0.74233 ; perimeter
G1 X195.842 Y77.730 E0.01324 ; perimeter
G1 X196.036 Y78.107 E0.01747 ; perimeter
G1 X171.393 Y98.785 E1.32525 ; perimeter
G1 X125.060 Y98.785 E1.90872 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.768 Y98.459 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y98.785 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.350 F10800.000 ; lift Z
G1 X124.715 Y135.618 ; move to first perimeter point
G1 Z4.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.800 Y135.618 E1.89151 ; perimeter
G1 X55.246 Y115.855 E1.26662 ; perimeter
G1 X59.188 Y111.157 E0.25261 ; perimeter
G1 X61.973 Y113.494 E0.14978 ; perimeter
G1 X62.317 Y113.084 E0.02205 ; perimeter
G1 X59.532 Y110.747 E0.14978 ; perimeter
G1 X62.943 Y106.682 E0.21861 ; perimeter
G1 X65.728 Y109.019 E0.14978 ; perimeter
G1 X66.072 Y108.609 E0.02205 ; perimeter
G1 X63.287 Y106.272 E0.14978 ; perimeter
G1 X66.086 Y102.937 E0.17936 ; perimeter
G1 X80.460 Y114.998 E0.77299 ; perimeter
G1 X85.597 Y114.998 E0.21162 ; perimeter
G1 X87.324 Y116.447 E0.09287 ; perimeter
G1 X85.668 Y118.420 E0.10612 ; perimeter
G1 X82.749 Y115.971 E0.15696 ; perimeter
G1 X82.405 Y116.381 E0.02205 ; perimeter
G1 X85.324 Y118.830 E0.15696 ; perimeter
G1 X78.648 Y126.787 E0.42789 ; perimeter
G1 X75.729 Y124.338 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.854 Y130.116 E0.15696 ; perimeter
G1 X76.264 Y130.460 E0.02205 ; perimeter
G1 X87.734 Y116.791 E0.73506 ; perimeter
G1 X94.312 Y122.311 E0.35376 ; perimeter
G1 X147.720 Y122.311 E2.20016 ; perimeter
G1 X155.117 Y122.311 E0.30476 ; perimeter
G1 X161.696 Y116.791 E0.35376 ; perimeter
G1 X173.165 Y130.460 E0.73506 ; perimeter
G1 X173.575 Y130.116 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.15696 ; perimeter
G1 X173.701 Y124.338 E0.02205 ; perimeter
G1 X170.782 Y126.787 E0.15696 ; perimeter
G1 X164.106 Y118.830 E0.42789 ; perimeter
G1 X167.024 Y116.381 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X162.106 Y116.447 E0.10612 ; perimeter
G1 X163.833 Y114.998 E0.09287 ; perimeter
G1 X168.970 Y114.998 E0.21162 ; perimeter
G1 X183.344 Y102.937 E0.77299 ; perimeter
G1 X186.142 Y106.272 E0.17936 ; perimeter
G1 X183.357 Y108.609 E0.14978 ; perimeter
G1 X183.701 Y109.019 E0.02205 ; perimeter
G1 X186.486 Y106.682 E0.14978 ; perimeter
G1 X189.898 Y110.747 E0.21861 ; perimeter
G1 X187.112 Y113.084 E0.14978 ; perimeter
G1 X187.456 Y113.494 E0.02205 ; perimeter
G1 X190.242 Y111.157 E0.14978 ; perimeter
G1 X194.183 Y115.855 E0.25261 ; perimeter
G1 X170.630 Y135.618 E1.26662 ; perimeter
G1 X124.775 Y135.618 E1.88904 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y135.222 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.944 Y135.222 E1.88557 ; perimeter
G1 X55.805 Y115.806 E1.24435 ; perimeter
G1 X59.237 Y111.716 E0.21995 ; perimeter
G1 X62.022 Y114.053 E0.14978 ; perimeter
G1 X62.844 Y113.074 E0.05265 ; perimeter
G1 X62.876 Y113.035 E0.00206 ; perimeter
G1 X60.090 Y110.698 E0.14978 ; perimeter
G1 X62.992 Y107.240 E0.18596 ; perimeter
G1 X65.777 Y109.577 E0.14978 ; perimeter
G1 X66.599 Y108.598 E0.05265 ; perimeter
G1 X66.631 Y108.560 E0.00206 ; perimeter
G1 X63.846 Y106.223 E0.14978 ; perimeter
G1 X66.135 Y103.495 E0.14671 ; perimeter
G1 X80.316 Y115.394 E0.76260 ; perimeter
G1 X85.453 Y115.394 E0.21162 ; perimeter
G1 X86.765 Y116.496 E0.07060 ; perimeter
G1 X85.619 Y117.862 E0.07346 ; perimeter
G1 X82.701 Y115.413 E0.15696 ; perimeter
G1 X81.847 Y116.430 E0.05471 ; perimeter
G1 X84.766 Y118.879 E0.15696 ; perimeter
G1 X78.599 Y126.229 E0.39523 ; perimeter
G1 X75.680 Y123.779 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.296 Y130.164 E0.15696 ; perimeter
G1 X76.313 Y131.018 E0.05471 ; perimeter
G1 X87.783 Y117.349 E0.73506 ; perimeter
G1 X94.168 Y122.707 E0.34338 ; perimeter
G1 X147.720 Y122.707 E2.20611 ; perimeter
G1 X155.262 Y122.707 E0.31070 ; perimeter
G1 X161.647 Y117.349 E0.34338 ; perimeter
G1 X173.116 Y131.018 E0.73506 ; perimeter
G1 X174.134 Y130.164 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.15696 ; perimeter
G1 X173.750 Y123.779 E0.05471 ; perimeter
G1 X170.831 Y126.229 E0.15696 ; perimeter
G1 X164.664 Y118.879 E0.39523 ; perimeter
G1 X167.583 Y116.430 E0.15696 ; perimeter
G1 X166.729 Y115.413 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X162.664 Y116.496 E0.07346 ; perimeter
G1 X163.977 Y115.394 E0.07060 ; perimeter
G1 X169.114 Y115.394 E0.21162 ; perimeter
G1 X183.295 Y103.495 E0.76260 ; perimeter
G1 X185.584 Y106.223 E0.14671 ; perimeter
G1 X182.799 Y108.560 E0.14978 ; perimeter
G1 X182.831 Y108.598 E0.00206 ; perimeter
G1 X183.652 Y109.577 E0.05265 ; perimeter
G1 X186.438 Y107.240 E0.14978 ; perimeter
G1 X189.339 Y110.698 E0.18596 ; perimeter
G1 X186.554 Y113.035 E0.14978 ; perimeter
G1 X186.586 Y113.074 E0.00206 ; perimeter
G1 X187.408 Y114.053 E0.05265 ; perimeter
G1 X190.193 Y111.716 E0.14978 ; perimeter
G1 X193.625 Y115.806 E0.21995 ; perimeter
G1 X170.486 Y135.222 E1.24435 ; perimeter
G1 X124.775 Y135.222 E1.88310 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.547 Y135.585 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y135.222 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.350 F10800.000 ; lift Z
G1 X124.715 Y121.915 ; move to first perimeter point
G1 Z4.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.456 Y121.915 E1.24652 ; perimeter
G1 X85.741 Y114.601 E0.46869 ; perimeter
G1 X80.604 Y114.601 E0.21162 ; perimeter
G1 X66.137 Y102.462 E0.77801 ; perimeter
G1 X66.219 Y102.369 E0.00511 ; perimeter
G1 X80.649 Y114.478 E0.77600 ; perimeter
G1 X85.786 Y114.478 E0.21162 ; perimeter
G1 X94.502 Y121.791 E0.46869 ; perimeter
G1 X154.928 Y121.791 E2.48932 ; perimeter
G1 X163.643 Y114.478 E0.46869 ; perimeter
G1 X168.780 Y114.478 E0.21162 ; perimeter
G1 X183.213 Y102.367 E0.77616 ; perimeter
G1 X183.293 Y102.462 E0.00510 ; perimeter
G1 X168.826 Y114.601 E0.77801 ; perimeter
G1 X163.689 Y114.601 E0.21162 ; perimeter
G1 X154.973 Y121.915 E0.46869 ; perimeter
G1 X124.775 Y121.915 E1.24404 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y121.915 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.350 F10800.000 ; lift Z
G1 X124.715 Y136.138 ; move to first perimeter point
G1 Z4.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.610 Y136.138 E1.89931 ; perimeter
G1 X54.708 Y116.082 E1.28539 ; perimeter
G1 X54.788 Y115.987 E0.00510 ; perimeter
G1 X78.655 Y136.014 E1.28353 ; perimeter
G1 X170.774 Y136.014 E3.79491 ; perimeter
G1 X194.642 Y115.987 E1.28353 ; perimeter
G1 X194.721 Y116.082 E0.00510 ; perimeter
G1 X170.819 Y136.138 E1.28539 ; perimeter
G1 X124.775 Y136.138 E1.89684 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y136.535 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.466 Y136.535 E1.90525 ; perimeter
G1 X54.173 Y116.150 E1.30641 ; perimeter
M73 Q26 S102
G1 X54.375 Y115.862 E0.01452 ; perimeter
G1 X65.867 Y102.167 E0.73647 ; perimeter
G1 X66.191 Y101.828 E0.01932 ; perimeter
G1 X80.793 Y114.081 E0.78529 ; perimeter
G1 X85.930 Y114.081 E0.21162 ; perimeter
G1 X94.646 Y121.394 E0.46869 ; perimeter
G1 X154.784 Y121.394 E2.47743 ; perimeter
G1 X163.499 Y114.081 E0.46869 ; perimeter
G1 X168.636 Y114.081 E0.21162 ; perimeter
G1 X183.238 Y101.829 E0.78526 ; perimeter
G1 X183.488 Y102.078 E0.01452 ; perimeter
G1 X195.054 Y115.862 E0.74128 ; perimeter
G1 X195.257 Y116.150 E0.01452 ; perimeter
G1 X170.964 Y136.535 E1.30641 ; perimeter
G1 X124.775 Y136.535 E1.90278 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y136.931 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.322 Y136.931 E1.91120 ; perimeter
G1 X53.679 Y116.253 E1.32525 ; perimeter
G1 X53.873 Y115.876 E0.01747 ; perimeter
G1 X54.064 Y115.617 E0.01324 ; perimeter
G1 X65.569 Y101.905 E0.73738 ; perimeter
G1 X65.870 Y101.579 E0.01826 ; perimeter
G1 X66.206 Y101.323 E0.01740 ; perimeter
G1 X80.938 Y113.685 E0.79224 ; perimeter
G1 X86.075 Y113.685 E0.21162 ; perimeter
G1 X94.790 Y120.998 E0.46869 ; perimeter
G1 X154.640 Y120.998 E2.46555 ; perimeter
G1 X163.355 Y113.685 E0.46869 ; perimeter
G1 X168.492 Y113.685 E0.21162 ; perimeter
G1 X183.224 Y101.323 E0.79227 ; perimeter
G1 X183.562 Y101.581 E0.01750 ; perimeter
G1 X183.783 Y101.813 E0.01321 ; perimeter
G1 X195.366 Y115.617 E0.74233 ; perimeter
G1 X195.556 Y115.876 E0.01324 ; perimeter
G1 X195.751 Y116.253 E0.01747 ; perimeter
G1 X171.108 Y136.931 E1.32525 ; perimeter
G1 X124.775 Y136.931 E1.90872 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.483 Y136.605 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;5


G1 F8640
G1 X121.483 Y136.931 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;5
G1 X125.000 Y97.647 ; move to first perimeter point
G1 Z5.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.021 Y97.647 E1.89413 ; perimeter
G1 X55.285 Y77.730 E1.27646 ; perimeter
G1 X59.339 Y72.899 E0.25982 ; perimeter
G1 X62.119 Y75.231 E0.14951 ; perimeter
G1 X62.463 Y74.821 E0.02205 ; perimeter
G1 X59.683 Y72.488 E0.14951 ; perimeter
G1 X63.094 Y68.423 E0.21861 ; perimeter
G1 X65.874 Y70.756 E0.14951 ; perimeter
G1 X66.219 Y70.346 E0.02205 ; perimeter
G1 X63.438 Y68.013 E0.14951 ; perimeter
G1 X66.349 Y64.544 E0.18657 ; perimeter
G1 X80.809 Y76.677 E0.77758 ; perimeter
G1 X85.946 Y76.677 E0.21162 ; perimeter
G1 X87.721 Y78.167 E0.09550 ; perimeter
G1 X85.953 Y80.274 E0.11333 ; perimeter
G1 X83.035 Y77.825 E0.15696 ; perimeter
G1 X82.691 Y78.235 E0.02205 ; perimeter
G1 X85.609 Y80.684 E0.15696 ; perimeter
G1 X78.933 Y88.641 E0.42789 ; perimeter
G1 X76.014 Y86.192 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.140 Y91.969 E0.15696 ; perimeter
G1 X76.550 Y92.314 E0.02205 ; perimeter
G1 X88.132 Y78.511 E0.74228 ; perimeter
G1 X94.661 Y83.990 E0.35114 ; perimeter
G1 X147.373 Y83.990 E2.17151 ; perimeter
G1 X155.339 Y83.990 E0.32816 ; perimeter
G1 X161.868 Y78.511 E0.35114 ; perimeter
G1 X173.450 Y92.314 E0.74227 ; perimeter
G1 X173.860 Y91.969 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.15696 ; perimeter
G1 X173.986 Y86.192 E0.02205 ; perimeter
G1 X171.067 Y88.641 E0.15696 ; perimeter
G1 X164.391 Y80.684 E0.42789 ; perimeter
G1 X167.309 Y78.235 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X162.279 Y78.167 E0.11333 ; perimeter
G1 X164.054 Y76.677 E0.09550 ; perimeter
G1 X169.191 Y76.677 E0.21162 ; perimeter
G1 X183.651 Y64.544 E0.77758 ; perimeter
G1 X186.562 Y68.013 E0.18657 ; perimeter
G1 X183.781 Y70.346 E0.14951 ; perimeter
G1 X184.126 Y70.756 E0.02205 ; perimeter
G1 X186.906 Y68.423 E0.14951 ; perimeter
G1 X190.317 Y72.488 E0.21861 ; perimeter
G1 X187.537 Y74.821 E0.14951 ; perimeter
G1 X187.881 Y75.231 E0.02205 ; perimeter
G1 X190.661 Y72.899 E0.14951 ; perimeter
G1 X194.715 Y77.730 E0.25982 ; perimeter
G1 X170.979 Y97.647 E1.27646 ; perimeter
G1 X125.060 Y97.647 E1.89166 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y97.251 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.165 Y97.251 E1.88819 ; perimeter
G1 X55.843 Y77.681 E1.25419 ; perimeter
G1 X59.388 Y73.457 E0.22716 ; perimeter
G1 X62.168 Y75.790 E0.14951 ; perimeter
G1 X62.974 Y74.830 E0.05163 ; perimeter
G1 X63.022 Y74.772 E0.00308 ; perimeter
G1 X60.242 Y72.440 E0.14951 ; perimeter
G1 X63.143 Y68.982 E0.18596 ; perimeter
G1 X65.923 Y71.315 E0.14951 ; perimeter
G1 X66.777 Y70.297 E0.05471 ; perimeter
G1 X63.997 Y67.964 E0.14951 ; perimeter
G1 X66.398 Y65.102 E0.15392 ; perimeter
G1 X80.664 Y77.073 E0.76719 ; perimeter
G1 X85.801 Y77.073 E0.21162 ; perimeter
M73 P26 R100
G1 X87.163 Y78.216 E0.07323 ; perimeter
G1 X85.904 Y79.716 E0.08067 ; perimeter
G1 X82.986 Y77.267 E0.15696 ; perimeter
G1 X82.132 Y78.284 E0.05471 ; perimeter
G1 X85.051 Y80.733 E0.15696 ; perimeter
G1 X78.884 Y88.082 E0.39523 ; perimeter
G1 X75.965 Y85.633 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.581 Y92.018 E0.15696 ; perimeter
G1 X76.599 Y92.872 E0.05471 ; perimeter
G1 X88.180 Y79.069 E0.74228 ; perimeter
G1 X94.517 Y84.386 E0.34075 ; perimeter
G1 X147.373 Y84.386 E2.17745 ; perimeter
G1 X155.483 Y84.386 E0.33410 ; perimeter
G1 X161.820 Y79.069 E0.34075 ; perimeter
G1 X173.401 Y92.872 E0.74228 ; perimeter
G1 X174.419 Y92.018 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.15696 ; perimeter
G1 X174.035 Y85.633 E0.05471 ; perimeter
G1 X171.116 Y88.082 E0.15696 ; perimeter
G1 X164.949 Y80.733 E0.39523 ; perimeter
G1 X167.868 Y78.284 E0.15696 ; perimeter
G1 X167.014 Y77.267 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X162.837 Y78.216 E0.08067 ; perimeter
G1 X164.199 Y77.073 E0.07323 ; perimeter
G1 X169.336 Y77.073 E0.21162 ; perimeter
G1 X183.602 Y65.102 E0.76719 ; perimeter
G1 X186.003 Y67.964 E0.15392 ; perimeter
G1 X183.223 Y70.297 E0.14951 ; perimeter
G1 X183.271 Y70.354 E0.00308 ; perimeter
G1 X184.077 Y71.315 E0.05163 ; perimeter
G1 X186.857 Y68.982 E0.14951 ; perimeter
G1 X189.758 Y72.440 E0.18596 ; perimeter
G1 X186.978 Y74.772 E0.14951 ; perimeter
G1 X187.026 Y74.830 E0.00308 ; perimeter
G1 X187.832 Y75.790 E0.05163 ; perimeter
G1 X190.612 Y73.457 E0.14951 ; perimeter
G1 X194.157 Y77.681 E0.22716 ; perimeter
G1 X170.835 Y97.251 E1.25419 ; perimeter
G1 X125.060 Y97.251 E1.88572 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.833 Y97.614 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y97.251 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.600 F10800.000 ; lift Z
G1 X125.000 Y83.593 ; move to first perimeter point
G1 Z5.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.805 Y83.593 E1.24389 ; perimeter
G1 X86.090 Y76.280 E0.46869 ; perimeter
G1 X80.953 Y76.280 E0.21162 ; perimeter
G1 X66.406 Y64.074 E0.78231 ; perimeter
G1 X66.490 Y63.983 E0.00511 ; perimeter
G1 X80.998 Y76.156 E0.78021 ; perimeter
G1 X86.135 Y76.156 E0.21162 ; perimeter
G1 X94.850 Y83.469 E0.46869 ; perimeter
G1 X155.150 Y83.469 E2.48407 ; perimeter
G1 X163.865 Y76.156 E0.46869 ; perimeter
G1 X169.002 Y76.156 E0.21162 ; perimeter
G1 X183.513 Y63.980 E0.78036 ; perimeter
G1 X183.599 Y64.070 E0.00511 ; perimeter
G1 X169.047 Y76.280 E0.78255 ; perimeter
G1 X163.910 Y76.280 E0.21162 ; perimeter
G1 X155.195 Y83.593 E0.46869 ; perimeter
G1 X125.060 Y83.593 E1.24142 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y83.593 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.600 F10800.000 ; lift Z
G1 X125.000 Y98.167 ; move to first perimeter point
G1 Z5.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.832 Y98.167 E1.90193 ; perimeter
G1 X54.754 Y77.963 E1.29484 ; perimeter
G1 X54.827 Y77.863 E0.00511 ; perimeter
G1 X78.877 Y98.043 E1.29332 ; perimeter
G1 X171.123 Y98.043 E3.80015 ; perimeter
G1 X195.173 Y77.863 E1.29332 ; perimeter
G1 X195.246 Y77.963 E0.00511 ; perimeter
G1 X171.168 Y98.167 E1.29484 ; perimeter
G1 X125.060 Y98.167 E1.89946 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y98.563 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.688 Y98.563 E1.90788 ; perimeter
G1 X54.238 Y78.048 E1.31482 ; perimeter
G1 X54.355 Y77.837 E0.00992 ; perimeter
G1 X54.527 Y77.603 E0.01198 ; perimeter
G1 X66.004 Y63.925 E0.73554 ; perimeter
G1 X66.298 Y63.605 E0.01792 ; perimeter
G1 X66.481 Y63.458 E0.00968 ; perimeter
G1 X81.142 Y75.760 E0.78845 ; perimeter
G1 X86.279 Y75.760 E0.21162 ; perimeter
G1 X94.995 Y83.073 E0.46869 ; perimeter
G1 X155.005 Y83.073 E2.47218 ; perimeter
G1 X163.721 Y75.760 E0.46869 ; perimeter
G1 X168.858 Y75.760 E0.21162 ; perimeter
G1 X183.519 Y63.458 E0.78845 ; perimeter
G1 X183.706 Y63.609 E0.00992 ; perimeter
G1 X183.907 Y63.819 E0.01198 ; perimeter
G1 X195.473 Y77.603 E0.74125 ; perimeter
G1 X195.645 Y77.837 E0.01198 ; perimeter
G1 X195.762 Y78.048 E0.00992 ; perimeter
G1 X171.312 Y98.563 E1.31482 ; perimeter
G1 X125.060 Y98.563 E1.90541 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y98.960 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.543 Y98.960 E1.91382 ; perimeter
G1 X53.760 Y78.164 E1.33278 ; perimeter
G1 X53.893 Y77.847 E0.01415 ; perimeter
G1 X54.022 Y77.621 E0.01073 ; perimeter
G1 X54.215 Y77.358 E0.01345 ; perimeter
G1 X65.706 Y63.663 E0.73645 ; perimeter
G1 X66.025 Y63.317 E0.01939 ; perimeter
G1 X66.223 Y63.152 E0.01064 ; perimeter
G1 X66.512 Y62.967 E0.01415 ; perimeter
G1 X81.287 Y75.364 E0.79452 ; perimeter
G1 X86.424 Y75.364 E0.21162 ; perimeter
G1 X95.139 Y82.677 E0.46869 ; perimeter
G1 X154.861 Y82.677 E2.46030 ; perimeter
G1 X163.576 Y75.364 E0.46869 ; perimeter
G1 X168.713 Y75.364 E0.21162 ; perimeter
G1 X183.488 Y62.967 E0.79452 ; perimeter
G1 X183.777 Y63.152 E0.01415 ; perimeter
G1 X183.977 Y63.319 E0.01073 ; perimeter
G1 X184.203 Y63.554 E0.01345 ; perimeter
G1 X195.785 Y77.358 E0.74232 ; perimeter
G1 X195.978 Y77.621 E0.01345 ; perimeter
G1 X196.107 Y77.847 E0.01073 ; perimeter
G1 X196.240 Y78.164 E0.01415 ; perimeter
G1 X171.457 Y98.960 E1.33278 ; perimeter
G1 X125.060 Y98.960 E1.91135 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.768 Y98.634 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y98.960 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.600 F10800.000 ; lift Z
G1 X124.715 Y135.793 ; move to first perimeter point
G1 Z5.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.736 Y135.793 E1.89413 ; perimeter
G1 X55.000 Y115.876 E1.27646 ; perimeter
G1 X59.054 Y111.045 E0.25982 ; perimeter
G1 X61.834 Y113.378 E0.14951 ; perimeter
G1 X62.178 Y112.967 E0.02205 ; perimeter
G1 X59.398 Y110.635 E0.14951 ; perimeter
G1 X62.809 Y106.569 E0.21861 ; perimeter
G1 X65.589 Y108.902 E0.14951 ; perimeter
G1 X65.933 Y108.492 E0.02205 ; perimeter
G1 X63.153 Y106.159 E0.14951 ; perimeter
G1 X66.064 Y102.690 E0.18657 ; perimeter
G1 X80.524 Y114.823 E0.77758 ; perimeter
G1 X85.661 Y114.823 E0.21162 ; perimeter
G1 X87.436 Y116.313 E0.09550 ; perimeter
G1 X85.668 Y118.420 E0.11333 ; perimeter
G1 X82.749 Y115.971 E0.15696 ; perimeter
G1 X82.405 Y116.381 E0.02205 ; perimeter
G1 X85.324 Y118.830 E0.15696 ; perimeter
G1 X78.648 Y126.787 E0.42789 ; perimeter
G1 X75.729 Y124.338 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.854 Y130.116 E0.15696 ; perimeter
G1 X76.264 Y130.460 E0.02205 ; perimeter
G1 X87.846 Y116.657 E0.74228 ; perimeter
G1 X94.376 Y122.136 E0.35114 ; perimeter
G1 X147.088 Y122.136 E2.17151 ; perimeter
G1 X155.054 Y122.136 E0.32816 ; perimeter
G1 X161.583 Y116.657 E0.35114 ; perimeter
G1 X173.165 Y130.460 E0.74227 ; perimeter
G1 X173.575 Y130.116 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.15696 ; perimeter
G1 X173.701 Y124.338 E0.02205 ; perimeter
G1 X170.782 Y126.787 E0.15696 ; perimeter
G1 X164.106 Y118.830 E0.42789 ; perimeter
G1 X167.024 Y116.381 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X161.993 Y116.313 E0.11333 ; perimeter
G1 X163.769 Y114.823 E0.09550 ; perimeter
G1 X168.906 Y114.823 E0.21162 ; perimeter
G1 X183.365 Y102.690 E0.77758 ; perimeter
G1 X186.276 Y106.159 E0.18657 ; perimeter
G1 X183.496 Y108.492 E0.14951 ; perimeter
G1 X183.840 Y108.902 E0.02205 ; perimeter
G1 X186.621 Y106.569 E0.14951 ; perimeter
G1 X190.032 Y110.635 E0.21861 ; perimeter
G1 X187.251 Y112.967 E0.14951 ; perimeter
G1 X187.596 Y113.378 E0.02205 ; perimeter
G1 X190.376 Y111.045 E0.14951 ; perimeter
G1 X194.430 Y115.876 E0.25982 ; perimeter
G1 X170.694 Y135.793 E1.27646 ; perimeter
G1 X124.775 Y135.793 E1.89166 ; perimeter
M73 Q26 S101
M204 S1000 ; adjust acceleration
G1 X124.715 Y135.397 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.880 Y135.397 E1.88819 ; perimeter
G1 X55.558 Y115.827 E1.25419 ; perimeter
G1 X59.103 Y111.603 E0.22716 ; perimeter
G1 X61.883 Y113.936 E0.14951 ; perimeter
G1 X62.689 Y112.976 E0.05163 ; perimeter
G1 X62.737 Y112.919 E0.00308 ; perimeter
G1 X59.956 Y110.586 E0.14951 ; perimeter
G1 X62.858 Y107.128 E0.18596 ; perimeter
G1 X65.638 Y109.461 E0.14951 ; perimeter
G1 X66.492 Y108.443 E0.05471 ; perimeter
G1 X63.712 Y106.111 E0.14951 ; perimeter
G1 X66.113 Y103.248 E0.15392 ; perimeter
G1 X80.379 Y115.219 E0.76719 ; perimeter
G1 X85.516 Y115.219 E0.21162 ; perimeter
G1 X86.878 Y116.362 E0.07323 ; perimeter
G1 X85.619 Y117.862 E0.08067 ; perimeter
G1 X82.701 Y115.413 E0.15696 ; perimeter
G1 X81.847 Y116.430 E0.05471 ; perimeter
G1 X84.766 Y118.879 E0.15696 ; perimeter
G1 X78.599 Y126.229 E0.39523 ; perimeter
G1 X75.680 Y123.779 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.296 Y130.164 E0.15696 ; perimeter
G1 X76.313 Y131.018 E0.05471 ; perimeter
G1 X87.895 Y117.215 E0.74228 ; perimeter
G1 X94.232 Y122.532 E0.34075 ; perimeter
G1 X147.088 Y122.532 E2.17745 ; perimeter
G1 X155.198 Y122.532 E0.33410 ; perimeter
G1 X161.534 Y117.215 E0.34075 ; perimeter
G1 X173.116 Y131.018 E0.74228 ; perimeter
G1 X174.134 Y130.164 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.15696 ; perimeter
G1 X173.750 Y123.779 E0.05471 ; perimeter
G1 X170.831 Y126.229 E0.15696 ; perimeter
G1 X164.664 Y118.879 E0.39523 ; perimeter
G1 X167.583 Y116.430 E0.15696 ; perimeter
G1 X166.729 Y115.413 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X162.552 Y116.362 E0.08067 ; perimeter
G1 X163.913 Y115.219 E0.07323 ; perimeter
G1 X169.050 Y115.219 E0.21162 ; perimeter
G1 X183.316 Y103.248 E0.76719 ; perimeter
G1 X185.718 Y106.111 E0.15392 ; perimeter
G1 X182.938 Y108.443 E0.14951 ; perimeter
G1 X182.986 Y108.501 E0.00308 ; perimeter
G1 X183.792 Y109.461 E0.05163 ; perimeter
G1 X186.572 Y107.128 E0.14951 ; perimeter
G1 X189.473 Y110.586 E0.18596 ; perimeter
G1 X186.693 Y112.919 E0.14951 ; perimeter
G1 X186.741 Y112.976 E0.00308 ; perimeter
G1 X187.547 Y113.936 E0.05163 ; perimeter
G1 X190.327 Y111.603 E0.14951 ; perimeter
G1 X193.871 Y115.827 E0.22716 ; perimeter
G1 X170.549 Y135.397 E1.25419 ; perimeter
G1 X124.775 Y135.397 E1.88572 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.547 Y135.760 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y135.397 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.600 F10800.000 ; lift Z
G1 X124.715 Y121.739 ; move to first perimeter point
G1 Z5.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.520 Y121.739 E1.24389 ; perimeter
G1 X85.805 Y114.426 E0.46869 ; perimeter
G1 X80.668 Y114.426 E0.21162 ; perimeter
G1 X66.121 Y102.220 E0.78231 ; perimeter
G1 X66.205 Y102.129 E0.00511 ; perimeter
G1 X80.713 Y114.303 E0.78021 ; perimeter
G1 X85.850 Y114.303 E0.21162 ; perimeter
G1 X94.565 Y121.616 E0.46869 ; perimeter
G1 X154.864 Y121.616 E2.48407 ; perimeter
G1 X163.580 Y114.303 E0.46869 ; perimeter
G1 X168.717 Y114.303 E0.21162 ; perimeter
G1 X183.228 Y102.126 E0.78036 ; perimeter
G1 X183.314 Y102.216 E0.00511 ; perimeter
G1 X168.762 Y114.426 E0.78255 ; perimeter
G1 X163.625 Y114.426 E0.21162 ; perimeter
G1 X154.909 Y121.739 E0.46869 ; perimeter
G1 X124.775 Y121.739 E1.24142 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y121.739 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.600 F10800.000 ; lift Z
G1 X124.715 Y136.313 ; move to first perimeter point
G1 Z5.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.547 Y136.313 E1.90193 ; perimeter
G1 X54.469 Y116.110 E1.29484 ; perimeter
G1 X54.542 Y116.009 E0.00511 ; perimeter
G1 X78.592 Y136.189 E1.29332 ; perimeter
G1 X170.838 Y136.189 E3.80015 ; perimeter
G1 X194.887 Y116.009 E1.29332 ; perimeter
G1 X194.961 Y116.110 E0.00511 ; perimeter
G1 X170.883 Y136.313 E1.29484 ; perimeter
G1 X124.775 Y136.313 E1.89946 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y136.710 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.402 Y136.710 E1.90788 ; perimeter
G1 X53.953 Y116.194 E1.31482 ; perimeter
G1 X54.070 Y115.983 E0.00992 ; perimeter
G1 X54.242 Y115.749 E0.01198 ; perimeter
G1 X65.718 Y102.071 E0.73554 ; perimeter
G1 X66.013 Y101.752 E0.01792 ; perimeter
G1 X66.196 Y101.604 E0.00968 ; perimeter
G1 X80.857 Y113.906 E0.78845 ; perimeter
G1 X85.994 Y113.906 E0.21162 ; perimeter
G1 X94.709 Y121.219 E0.46869 ; perimeter
G1 X154.720 Y121.219 E2.47218 ; perimeter
M73 P27 R99
G1 X163.436 Y113.906 E0.46869 ; perimeter
G1 X168.573 Y113.906 E0.21162 ; perimeter
G1 X183.234 Y101.604 E0.78845 ; perimeter
G1 X183.421 Y101.755 E0.00992 ; perimeter
G1 X183.622 Y101.965 E0.01198 ; perimeter
G1 X195.188 Y115.749 E0.74125 ; perimeter
G1 X195.360 Y115.983 E0.01198 ; perimeter
G1 X195.477 Y116.194 E0.00992 ; perimeter
G1 X171.027 Y136.710 E1.31482 ; perimeter
G1 X124.775 Y136.710 E1.90541 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y137.106 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.258 Y137.106 E1.91382 ; perimeter
G1 X53.475 Y116.310 E1.33278 ; perimeter
G1 X53.608 Y115.994 E0.01415 ; perimeter
G1 X53.737 Y115.767 E0.01073 ; perimeter
G1 X53.930 Y115.504 E0.01345 ; perimeter
G1 X65.421 Y101.810 E0.73645 ; perimeter
G1 X65.740 Y101.463 E0.01939 ; perimeter
G1 X65.938 Y101.299 E0.01064 ; perimeter
G1 X66.227 Y101.113 E0.01415 ; perimeter
G1 X81.001 Y113.510 E0.79452 ; perimeter
G1 X86.138 Y113.510 E0.21162 ; perimeter
G1 X94.854 Y120.823 E0.46869 ; perimeter
G1 X154.576 Y120.823 E2.46030 ; perimeter
G1 X163.291 Y113.510 E0.46869 ; perimeter
G1 X168.428 Y113.510 E0.21162 ; perimeter
G1 X183.203 Y101.113 E0.79452 ; perimeter
G1 X183.491 Y101.299 E0.01415 ; perimeter
G1 X183.692 Y101.465 E0.01073 ; perimeter
G1 X183.917 Y101.701 E0.01345 ; perimeter
G1 X195.500 Y115.504 E0.74232 ; perimeter
G1 X195.693 Y115.767 E0.01345 ; perimeter
G1 X195.822 Y115.994 E0.01073 ; perimeter
G1 X195.955 Y116.310 E0.01415 ; perimeter
G1 X171.172 Y137.106 E1.33278 ; perimeter
G1 X124.775 Y137.106 E1.91135 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.483 Y136.780 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;5.25


G1 F8640
G1 X121.483 Y137.106 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;5.25
G1 X125.000 Y97.822 ; move to first perimeter point
G1 Z5.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.957 Y97.822 E1.89676 ; perimeter
G1 X55.038 Y77.752 E1.28630 ; perimeter
G1 X59.205 Y72.786 E0.26703 ; perimeter
G1 X61.980 Y75.115 E0.14924 ; perimeter
G1 X62.324 Y74.705 E0.02205 ; perimeter
G1 X59.549 Y72.376 E0.14924 ; perimeter
G1 X62.960 Y68.311 E0.21861 ; perimeter
G1 X65.735 Y70.639 E0.14924 ; perimeter
G1 X66.079 Y70.229 E0.02205 ; perimeter
G1 X63.304 Y67.901 E0.14924 ; perimeter
G1 X66.328 Y64.297 E0.19378 ; perimeter
G1 X80.872 Y76.502 E0.78216 ; perimeter
G1 X86.009 Y76.502 E0.21162 ; perimeter
G1 X87.834 Y78.033 E0.09812 ; perimeter
G1 X85.953 Y80.274 E0.12054 ; perimeter
G1 X83.035 Y77.825 E0.15696 ; perimeter
G1 X82.691 Y78.235 E0.02205 ; perimeter
G1 X85.609 Y80.684 E0.15696 ; perimeter
G1 X78.933 Y88.641 E0.42789 ; perimeter
G1 X76.014 Y86.192 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.140 Y91.969 E0.15696 ; perimeter
G1 X76.550 Y92.314 E0.02205 ; perimeter
G1 X88.244 Y78.377 E0.74949 ; perimeter
G1 X94.725 Y83.815 E0.34851 ; perimeter
G1 X146.741 Y83.815 E2.14286 ; perimeter
G1 X155.275 Y83.815 E0.35156 ; perimeter
G1 X161.756 Y78.377 E0.34851 ; perimeter
G1 X173.450 Y92.314 E0.74949 ; perimeter
G1 X173.860 Y91.969 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.15696 ; perimeter
G1 X173.986 Y86.192 E0.02205 ; perimeter
G1 X171.067 Y88.641 E0.15696 ; perimeter
G1 X164.391 Y80.684 E0.42789 ; perimeter
G1 X167.309 Y78.235 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X162.166 Y78.033 E0.12054 ; perimeter
G1 X163.991 Y76.502 E0.09812 ; perimeter
G1 X169.128 Y76.502 E0.21162 ; perimeter
G1 X183.672 Y64.297 E0.78216 ; perimeter
G1 X186.696 Y67.901 E0.19378 ; perimeter
G1 X183.921 Y70.229 E0.14924 ; perimeter
G1 X184.265 Y70.639 E0.02205 ; perimeter
G1 X187.040 Y68.311 E0.14924 ; perimeter
G1 X190.451 Y72.376 E0.21861 ; perimeter
G1 X187.676 Y74.705 E0.14924 ; perimeter
G1 X188.020 Y75.115 E0.02205 ; perimeter
G1 X190.795 Y72.786 E0.14924 ; perimeter
G1 X194.962 Y77.752 E0.26703 ; perimeter
G1 X171.043 Y97.822 E1.28630 ; perimeter
G1 X125.060 Y97.822 E1.89429 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y97.426 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.102 Y97.426 E1.89082 ; perimeter
G1 X55.597 Y77.703 E1.26402 ; perimeter
G1 X59.254 Y73.344 E0.23437 ; perimeter
G1 X62.029 Y75.673 E0.14924 ; perimeter
G1 X62.819 Y74.732 E0.05061 ; perimeter
G1 X62.883 Y74.656 E0.00410 ; perimeter
G1 X60.107 Y72.327 E0.14924 ; perimeter
G1 X63.009 Y68.869 E0.18596 ; perimeter
G1 X65.784 Y71.198 E0.14924 ; perimeter
G1 X66.638 Y70.181 E0.05471 ; perimeter
G1 X63.863 Y67.852 E0.14924 ; perimeter
G1 X66.377 Y64.856 E0.16113 ; perimeter
G1 X80.728 Y76.898 E0.77178 ; perimeter
G1 X85.865 Y76.898 E0.21162 ; perimeter
G1 X87.276 Y78.081 E0.07585 ; perimeter
G1 X85.904 Y79.716 E0.08788 ; perimeter
G1 X82.986 Y77.267 E0.15696 ; perimeter
G1 X82.132 Y78.284 E0.05471 ; perimeter
G1 X85.051 Y80.733 E0.15696 ; perimeter
G1 X78.884 Y88.082 E0.39523 ; perimeter
G1 X75.965 Y85.633 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.581 Y92.018 E0.15696 ; perimeter
G1 X76.599 Y92.872 E0.05471 ; perimeter
G1 X88.293 Y78.935 E0.74949 ; perimeter
G1 X94.581 Y84.211 E0.33813 ; perimeter
G1 X146.741 Y84.211 E2.14880 ; perimeter
G1 X155.419 Y84.211 E0.35750 ; perimeter
G1 X161.707 Y78.935 E0.33813 ; perimeter
G1 X173.401 Y92.872 E0.74949 ; perimeter
G1 X174.419 Y92.018 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.15696 ; perimeter
G1 X174.035 Y85.633 E0.05471 ; perimeter
G1 X171.116 Y88.082 E0.15696 ; perimeter
G1 X164.949 Y80.733 E0.39523 ; perimeter
G1 X167.868 Y78.284 E0.15696 ; perimeter
G1 X167.014 Y77.267 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X162.724 Y78.081 E0.08788 ; perimeter
G1 X164.135 Y76.898 E0.07585 ; perimeter
G1 X169.272 Y76.898 E0.21162 ; perimeter
G1 X183.623 Y64.856 E0.77178 ; perimeter
G1 X186.137 Y67.852 E0.16113 ; perimeter
G1 X183.362 Y70.181 E0.14924 ; perimeter
G1 X183.426 Y70.257 E0.00410 ; perimeter
G1 X184.216 Y71.198 E0.05061 ; perimeter
G1 X186.991 Y68.869 E0.14924 ; perimeter
G1 X189.893 Y72.327 E0.18596 ; perimeter
G1 X187.117 Y74.656 E0.14924 ; perimeter
G1 X187.181 Y74.732 E0.00410 ; perimeter
G1 X187.971 Y75.673 E0.05061 ; perimeter
G1 X190.746 Y73.344 E0.14924 ; perimeter
G1 X194.403 Y77.703 E0.23438 ; perimeter
G1 X170.898 Y97.426 E1.26402 ; perimeter
G1 X125.060 Y97.426 E1.88834 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.833 Y97.789 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y97.426 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.850 F10800.000 ; lift Z
G1 X125.000 Y83.418 ; move to first perimeter point
G1 Z5.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.869 Y83.418 E1.24127 ; perimeter
G1 X86.154 Y76.105 E0.46869 ; perimeter
G1 X81.017 Y76.105 E0.21162 ; perimeter
G1 X66.391 Y63.833 E0.78653 ; perimeter
G1 X66.480 Y63.746 E0.00513 ; perimeter
G1 X81.062 Y75.981 E0.78417 ; perimeter
G1 X86.199 Y75.981 E0.21162 ; perimeter
G1 X94.914 Y83.294 E0.46869 ; perimeter
G1 X155.086 Y83.294 E2.47882 ; perimeter
G1 X163.801 Y75.981 E0.46869 ; perimeter
G1 X168.938 Y75.981 E0.21162 ; perimeter
G1 X183.520 Y63.746 E0.78417 ; perimeter
G1 X183.611 Y63.831 E0.00514 ; perimeter
G1 X168.983 Y76.105 E0.78665 ; perimeter
G1 X163.846 Y76.105 E0.21162 ; perimeter
G1 X155.131 Y83.418 E0.46869 ; perimeter
G1 X125.060 Y83.418 E1.23879 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y83.418 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.850 F10800.000 ; lift Z
G1 X125.000 Y98.342 ; move to first perimeter point
G1 Z5.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.768 Y98.342 E1.90456 ; perimeter
G1 X54.522 Y77.997 E1.30390 ; perimeter
G1 X54.590 Y77.892 E0.00514 ; perimeter
G1 X78.813 Y98.218 E1.30267 ; perimeter
G1 X171.187 Y98.218 E3.80540 ; perimeter
G1 X195.410 Y77.892 E1.30267 ; perimeter
G1 X195.478 Y77.997 E0.00514 ; perimeter
G1 X171.232 Y98.342 E1.30390 ; perimeter
M73 Q27 S100
G1 X125.060 Y98.342 E1.90209 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y98.738 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.624 Y98.738 E1.91050 ; perimeter
G1 X54.032 Y78.103 E1.32248 ; perimeter
G1 X54.218 Y77.729 E0.01725 ; perimeter
G1 X54.393 Y77.490 E0.01218 ; perimeter
G1 X65.855 Y63.830 E0.73462 ; perimeter
G1 X66.168 Y63.489 E0.01904 ; perimeter
G1 X66.500 Y63.245 E0.01697 ; perimeter
G1 X81.206 Y75.585 E0.79086 ; perimeter
G1 X86.343 Y75.585 E0.21162 ; perimeter
G1 X95.058 Y82.898 E0.46869 ; perimeter
G1 X154.942 Y82.898 E2.46693 ; perimeter
G1 X163.657 Y75.585 E0.46869 ; perimeter
G1 X168.794 Y75.585 E0.21162 ; perimeter
G1 X183.500 Y63.245 E0.79086 ; perimeter
G1 X183.837 Y63.494 E0.01725 ; perimeter
G1 X184.042 Y63.707 E0.01218 ; perimeter
G1 X195.607 Y77.490 E0.74122 ; perimeter
G1 X195.782 Y77.729 E0.01218 ; perimeter
G1 X195.968 Y78.103 E0.01725 ; perimeter
G1 X171.376 Y98.738 E1.32248 ; perimeter
G1 X125.060 Y98.738 E1.90803 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y99.135 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.480 Y99.135 E1.91645 ; perimeter
G1 X53.574 Y78.237 E1.33932 ; perimeter
G1 X53.634 Y78.026 E0.00904 ; perimeter
G1 X53.762 Y77.730 E0.01329 ; perimeter
G1 X53.885 Y77.513 E0.01028 ; perimeter
G1 X54.081 Y77.245 E0.01365 ; perimeter
G1 X65.557 Y63.568 E0.73553 ; perimeter
G1 X65.894 Y63.201 E0.02051 ; perimeter
G1 X66.085 Y63.044 E0.01018 ; perimeter
G1 X66.354 Y62.866 E0.01329 ; perimeter
G1 X66.552 Y62.771 E0.00904 ; perimeter
G1 X81.350 Y75.189 E0.79582 ; perimeter
G1 X86.487 Y75.189 E0.21162 ; perimeter
G1 X95.203 Y82.502 E0.46869 ; perimeter
G1 X154.797 Y82.502 E2.45505 ; perimeter
G1 X163.513 Y75.189 E0.46869 ; perimeter
G1 X168.650 Y75.189 E0.21162 ; perimeter
G1 X183.451 Y62.769 E0.79596 ; perimeter
G1 X183.645 Y62.866 E0.00893 ; perimeter
G1 X183.915 Y63.044 E0.01335 ; perimeter
G1 X184.107 Y63.203 E0.01028 ; perimeter
G1 X184.337 Y63.442 E0.01365 ; perimeter
G1 X195.919 Y77.245 E0.74231 ; perimeter
G1 X196.115 Y77.513 E0.01365 ; perimeter
G1 X196.238 Y77.730 E0.01028 ; perimeter
G1 X196.366 Y78.026 E0.01329 ; perimeter
G1 X196.426 Y78.237 E0.00904 ; perimeter
G1 X171.520 Y99.135 E1.33932 ; perimeter
G1 X125.060 Y99.135 E1.91397 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.768 Y98.809 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y99.135 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.850 F10800.000 ; lift Z
G1 X124.715 Y135.968 ; move to first perimeter point
G1 Z5.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.672 Y135.968 E1.89676 ; perimeter
G1 X54.753 Y115.898 E1.28630 ; perimeter
G1 X58.920 Y110.932 E0.26703 ; perimeter
G1 X61.695 Y113.261 E0.14924 ; perimeter
G1 X62.039 Y112.851 E0.02205 ; perimeter
G1 X59.264 Y110.522 E0.14924 ; perimeter
G1 X62.675 Y106.457 E0.21861 ; perimeter
G1 X65.450 Y108.786 E0.14924 ; perimeter
G1 X65.794 Y108.376 E0.02205 ; perimeter
G1 X63.019 Y106.047 E0.14924 ; perimeter
G1 X66.043 Y102.443 E0.19378 ; perimeter
G1 X80.587 Y114.648 E0.78216 ; perimeter
G1 X85.724 Y114.648 E0.21162 ; perimeter
G1 X87.549 Y116.179 E0.09812 ; perimeter
G1 X85.668 Y118.420 E0.12054 ; perimeter
G1 X82.749 Y115.971 E0.15696 ; perimeter
G1 X82.405 Y116.381 E0.02205 ; perimeter
G1 X85.324 Y118.830 E0.15696 ; perimeter
G1 X78.648 Y126.787 E0.42789 ; perimeter
G1 X75.729 Y124.338 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.854 Y130.116 E0.15696 ; perimeter
G1 X76.264 Y130.460 E0.02205 ; perimeter
G1 X87.959 Y116.523 E0.74949 ; perimeter
G1 X94.440 Y121.961 E0.34851 ; perimeter
G1 X146.456 Y121.961 E2.14286 ; perimeter
G1 X154.990 Y121.961 E0.35156 ; perimeter
G1 X161.471 Y116.523 E0.34851 ; perimeter
G1 X173.165 Y130.460 E0.74949 ; perimeter
G1 X173.575 Y130.116 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.15696 ; perimeter
G1 X173.701 Y124.338 E0.02205 ; perimeter
G1 X170.782 Y126.787 E0.15696 ; perimeter
G1 X164.106 Y118.830 E0.42789 ; perimeter
G1 X167.024 Y116.381 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X161.881 Y116.179 E0.12054 ; perimeter
G1 X163.705 Y114.648 E0.09812 ; perimeter
G1 X168.842 Y114.648 E0.21162 ; perimeter
G1 X183.387 Y102.443 E0.78216 ; perimeter
G1 X186.411 Y106.047 E0.19378 ; perimeter
G1 X183.635 Y108.376 E0.14924 ; perimeter
G1 X183.980 Y108.786 E0.02205 ; perimeter
G1 X186.755 Y106.457 E0.14924 ; perimeter
G1 X190.166 Y110.522 E0.21861 ; perimeter
G1 X187.391 Y112.851 E0.14924 ; perimeter
G1 X187.735 Y113.261 E0.02205 ; perimeter
G1 X190.510 Y110.932 E0.14924 ; perimeter
G1 X194.676 Y115.898 E0.26703 ; perimeter
G1 X170.757 Y135.968 E1.28630 ; perimeter
G1 X124.775 Y135.968 E1.89429 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y135.572 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.816 Y135.572 E1.89082 ; perimeter
G1 X55.312 Y115.849 E1.26402 ; perimeter
G1 X58.969 Y111.491 E0.23437 ; perimeter
M73 P28 R98
G1 X61.744 Y113.819 E0.14924 ; perimeter
G1 X62.533 Y112.878 E0.05061 ; perimeter
G1 X62.597 Y112.802 E0.00410 ; perimeter
G1 X59.822 Y110.473 E0.14924 ; perimeter
G1 X62.724 Y107.015 E0.18596 ; perimeter
G1 X65.499 Y109.344 E0.14924 ; perimeter
G1 X66.353 Y108.327 E0.05471 ; perimeter
G1 X63.577 Y105.998 E0.14924 ; perimeter
G1 X66.092 Y103.002 E0.16113 ; perimeter
G1 X80.443 Y115.044 E0.77178 ; perimeter
G1 X85.580 Y115.044 E0.21162 ; perimeter
G1 X86.990 Y116.228 E0.07585 ; perimeter
G1 X85.619 Y117.862 E0.08788 ; perimeter
G1 X82.701 Y115.413 E0.15696 ; perimeter
G1 X81.847 Y116.430 E0.05471 ; perimeter
G1 X84.766 Y118.879 E0.15696 ; perimeter
G1 X78.599 Y126.229 E0.39523 ; perimeter
G1 X75.680 Y123.779 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.296 Y130.164 E0.15696 ; perimeter
G1 X76.313 Y131.018 E0.05471 ; perimeter
G1 X88.008 Y117.081 E0.74949 ; perimeter
G1 X94.295 Y122.357 E0.33813 ; perimeter
G1 X146.456 Y122.357 E2.14880 ; perimeter
G1 X155.134 Y122.357 E0.35750 ; perimeter
G1 X161.422 Y117.081 E0.33813 ; perimeter
G1 X173.116 Y131.018 E0.74949 ; perimeter
G1 X174.134 Y130.164 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.15696 ; perimeter
G1 X173.750 Y123.779 E0.05471 ; perimeter
G1 X170.831 Y126.229 E0.15696 ; perimeter
G1 X164.664 Y118.879 E0.39523 ; perimeter
G1 X167.583 Y116.430 E0.15696 ; perimeter
G1 X166.729 Y115.413 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X162.439 Y116.228 E0.08788 ; perimeter
G1 X163.850 Y115.044 E0.07585 ; perimeter
G1 X168.987 Y115.044 E0.21162 ; perimeter
G1 X183.338 Y103.002 E0.77178 ; perimeter
G1 X185.852 Y105.998 E0.16113 ; perimeter
G1 X183.077 Y108.327 E0.14924 ; perimeter
G1 X183.141 Y108.403 E0.00410 ; perimeter
G1 X183.931 Y109.344 E0.05061 ; perimeter
G1 X186.706 Y107.015 E0.14924 ; perimeter
G1 X189.607 Y110.473 E0.18596 ; perimeter
G1 X186.832 Y112.802 E0.14924 ; perimeter
G1 X186.896 Y112.878 E0.00410 ; perimeter
G1 X187.686 Y113.819 E0.05061 ; perimeter
G1 X190.461 Y111.491 E0.14924 ; perimeter
G1 X194.118 Y115.849 E0.23438 ; perimeter
G1 X170.613 Y135.572 E1.26402 ; perimeter
G1 X124.775 Y135.572 E1.88834 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.548 Y135.935 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y135.572 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.850 F10800.000 ; lift Z
G1 X124.715 Y121.564 ; move to first perimeter point
G1 Z5.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.584 Y121.564 E1.24127 ; perimeter
G1 X85.868 Y114.251 E0.46869 ; perimeter
G1 X80.731 Y114.251 E0.21162 ; perimeter
G1 X66.106 Y101.979 E0.78653 ; perimeter
G1 X66.195 Y101.892 E0.00513 ; perimeter
G1 X80.777 Y114.127 E0.78417 ; perimeter
G1 X85.914 Y114.127 E0.21162 ; perimeter
G1 X94.629 Y121.441 E0.46869 ; perimeter
G1 X154.801 Y121.441 E2.47882 ; perimeter
G1 X163.516 Y114.127 E0.46869 ; perimeter
G1 X168.653 Y114.127 E0.21162 ; perimeter
G1 X183.235 Y101.892 E0.78417 ; perimeter
G1 X183.326 Y101.977 E0.00514 ; perimeter
G1 X168.698 Y114.251 E0.78665 ; perimeter
G1 X163.561 Y114.251 E0.21162 ; perimeter
G1 X154.846 Y121.564 E0.46869 ; perimeter
G1 X124.775 Y121.564 E1.23879 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y121.564 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.850 F10800.000 ; lift Z
G1 X124.715 Y136.488 ; move to first perimeter point
G1 Z5.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.483 Y136.488 E1.90456 ; perimeter
G1 X54.236 Y116.143 E1.30390 ; perimeter
G1 X54.305 Y116.039 E0.00514 ; perimeter
G1 X78.528 Y136.364 E1.30267 ; perimeter
G1 X170.902 Y136.364 E3.80540 ; perimeter
G1 X195.125 Y116.039 E1.30267 ; perimeter
G1 X195.193 Y116.143 E0.00514 ; perimeter
G1 X170.947 Y136.488 E1.30390 ; perimeter
G1 X124.775 Y136.488 E1.90209 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y136.885 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.339 Y136.885 E1.91050 ; perimeter
G1 X53.747 Y116.250 E1.32248 ; perimeter
G1 X53.933 Y115.875 E0.01725 ; perimeter
G1 X54.108 Y115.636 E0.01218 ; perimeter
G1 X65.570 Y101.976 E0.73462 ; perimeter
G1 X65.883 Y101.636 E0.01904 ; perimeter
G1 X66.215 Y101.391 E0.01697 ; perimeter
G1 X80.921 Y113.731 E0.79086 ; perimeter
G1 X86.058 Y113.731 E0.21162 ; perimeter
G1 X94.773 Y121.044 E0.46869 ; perimeter
G1 X154.656 Y121.044 E2.46693 ; perimeter
G1 X163.372 Y113.731 E0.46869 ; perimeter
G1 X168.509 Y113.731 E0.21162 ; perimeter
G1 X183.215 Y101.391 E0.79086 ; perimeter
G1 X183.552 Y101.640 E0.01725 ; perimeter
G1 X183.757 Y101.853 E0.01218 ; perimeter
G1 X195.322 Y115.636 E0.74122 ; perimeter
G1 X195.496 Y115.875 E0.01218 ; perimeter
G1 X195.683 Y116.250 E0.01725 ; perimeter
G1 X171.091 Y136.885 E1.32248 ; perimeter
G1 X124.775 Y136.885 E1.90803 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y137.281 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.194 Y137.281 E1.91645 ; perimeter
G1 X53.289 Y116.383 E1.33932 ; perimeter
G1 X53.349 Y116.172 E0.00904 ; perimeter
G1 X53.476 Y115.876 E0.01329 ; perimeter
G1 X53.600 Y115.659 E0.01028 ; perimeter
G1 X53.796 Y115.392 E0.01365 ; perimeter
G1 X65.272 Y101.714 E0.73553 ; perimeter
G1 X65.609 Y101.348 E0.02051 ; perimeter
G1 X65.799 Y101.190 E0.01018 ; perimeter
G1 X66.069 Y101.012 E0.01329 ; perimeter
G1 X66.267 Y100.917 E0.00904 ; perimeter
G1 X81.065 Y113.335 E0.79582 ; perimeter
G1 X86.202 Y113.335 E0.21162 ; perimeter
G1 X94.917 Y120.648 E0.46869 ; perimeter
G1 X154.512 Y120.648 E2.45505 ; perimeter
G1 X163.228 Y113.335 E0.46869 ; perimeter
G1 X168.365 Y113.335 E0.21162 ; perimeter
G1 X183.166 Y100.915 E0.79596 ; perimeter
G1 X183.360 Y101.012 E0.00893 ; perimeter
G1 X183.630 Y101.190 E0.01335 ; perimeter
G1 X183.822 Y101.349 E0.01028 ; perimeter
G1 X184.052 Y101.588 E0.01365 ; perimeter
G1 X195.634 Y115.392 E0.74231 ; perimeter
G1 X195.830 Y115.659 E0.01365 ; perimeter
G1 X195.953 Y115.876 E0.01028 ; perimeter
G1 X196.081 Y116.172 E0.01329 ; perimeter
G1 X196.140 Y116.383 E0.00904 ; perimeter
G1 X171.235 Y137.281 E1.33932 ; perimeter
G1 X124.775 Y137.281 E1.91397 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.483 Y136.955 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;5.5


G1 F8640
G1 X121.483 Y137.281 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z5.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;5.5
G1 X125.000 Y97.997 ; move to first perimeter point
G1 Z5.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.894 Y97.997 E1.89938 ; perimeter
G1 X54.792 Y77.773 E1.29613 ; perimeter
G1 X59.071 Y72.674 E0.27424 ; perimeter
G1 X61.841 Y74.998 E0.14897 ; perimeter
G1 X62.185 Y74.588 E0.02205 ; perimeter
G1 X59.415 Y72.263 E0.14897 ; perimeter
G1 X62.826 Y68.198 E0.21861 ; perimeter
G1 X65.596 Y70.523 E0.14897 ; perimeter
G1 X65.940 Y70.113 E0.02205 ; perimeter
G1 X63.170 Y67.788 E0.14897 ; perimeter
G1 X66.306 Y64.051 E0.20100 ; perimeter
G1 X80.936 Y76.326 E0.78675 ; perimeter
G1 X86.073 Y76.326 E0.21162 ; perimeter
G1 X87.947 Y77.898 E0.10075 ; perimeter
G1 X85.953 Y80.274 E0.12775 ; perimeter
G1 X83.035 Y77.825 E0.15696 ; perimeter
G1 X82.691 Y78.235 E0.02205 ; perimeter
G1 X85.609 Y80.684 E0.15696 ; perimeter
G1 X78.933 Y88.641 E0.42789 ; perimeter
G1 X76.014 Y86.192 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.140 Y91.969 E0.15696 ; perimeter
G1 X76.550 Y92.314 E0.02205 ; perimeter
G1 X88.357 Y78.243 E0.75670 ; perimeter
G1 X94.789 Y83.640 E0.34589 ; perimeter
G1 X146.109 Y83.640 E2.11421 ; perimeter
G1 X155.211 Y83.640 E0.37496 ; perimeter
G1 X161.643 Y78.243 E0.34589 ; perimeter
G1 X173.450 Y92.314 E0.75670 ; perimeter
G1 X173.860 Y91.969 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.15696 ; perimeter
G1 X173.986 Y86.192 E0.02205 ; perimeter
G1 X171.067 Y88.641 E0.15696 ; perimeter
G1 X164.391 Y80.684 E0.42789 ; perimeter
G1 X167.309 Y78.235 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X162.053 Y77.898 E0.12775 ; perimeter
G1 X163.927 Y76.326 E0.10075 ; perimeter
G1 X169.064 Y76.326 E0.21162 ; perimeter
G1 X183.694 Y64.051 E0.78675 ; perimeter
M73 Q28 S99
G1 X186.830 Y67.788 E0.20100 ; perimeter
G1 X184.060 Y70.113 E0.14897 ; perimeter
G1 X184.404 Y70.523 E0.02205 ; perimeter
G1 X187.174 Y68.198 E0.14897 ; perimeter
G1 X190.585 Y72.263 E0.21861 ; perimeter
G1 X187.815 Y74.588 E0.14897 ; perimeter
G1 X188.159 Y74.998 E0.02205 ; perimeter
G1 X190.929 Y72.674 E0.14897 ; perimeter
G1 X195.208 Y77.773 E0.27424 ; perimeter
G1 X171.106 Y97.997 E1.29613 ; perimeter
G1 X125.060 Y97.997 E1.89691 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y97.601 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.038 Y97.601 E1.89344 ; perimeter
G1 X55.350 Y77.724 E1.27386 ; perimeter
G1 X59.120 Y73.232 E0.24159 ; perimeter
G1 X61.890 Y75.556 E0.14897 ; perimeter
G1 X62.664 Y74.634 E0.04959 ; perimeter
G1 X62.743 Y74.539 E0.00512 ; perimeter
G1 X59.973 Y72.215 E0.14897 ; perimeter
G1 X62.875 Y68.757 E0.18596 ; perimeter
G1 X65.645 Y71.081 E0.14897 ; perimeter
G1 X66.499 Y70.064 E0.05471 ; perimeter
G1 X63.729 Y67.739 E0.14897 ; perimeter
G1 X66.355 Y64.609 E0.16834 ; perimeter
G1 X80.792 Y76.723 E0.77636 ; perimeter
G1 X85.929 Y76.723 E0.21162 ; perimeter
G1 X87.388 Y77.947 E0.07848 ; perimeter
G1 X85.904 Y79.716 E0.09509 ; perimeter
G1 X82.986 Y77.267 E0.15696 ; perimeter
G1 X82.132 Y78.284 E0.05471 ; perimeter
G1 X85.051 Y80.733 E0.15696 ; perimeter
G1 X78.884 Y88.082 E0.39523 ; perimeter
G1 X75.965 Y85.633 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.581 Y92.018 E0.15696 ; perimeter
G1 X76.599 Y92.872 E0.05471 ; perimeter
G1 X88.405 Y78.801 E0.75670 ; perimeter
G1 X94.644 Y84.036 E0.33550 ; perimeter
G1 X146.109 Y84.036 E2.12015 ; perimeter
G1 X155.356 Y84.036 E0.38091 ; perimeter
G1 X161.595 Y78.801 E0.33550 ; perimeter
G1 X173.401 Y92.872 E0.75670 ; perimeter
G1 X174.419 Y92.018 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.15696 ; perimeter
G1 X174.035 Y85.633 E0.05471 ; perimeter
G1 X171.116 Y88.082 E0.15696 ; perimeter
G1 X164.949 Y80.733 E0.39523 ; perimeter
G1 X167.868 Y78.284 E0.15696 ; perimeter
G1 X167.014 Y77.267 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X162.612 Y77.947 E0.09509 ; perimeter
G1 X164.071 Y76.723 E0.07848 ; perimeter
G1 X169.208 Y76.723 E0.21162 ; perimeter
G1 X183.645 Y64.609 E0.77636 ; perimeter
G1 X186.271 Y67.739 E0.16834 ; perimeter
G1 X183.501 Y70.064 E0.14897 ; perimeter
G1 X184.355 Y71.081 E0.05471 ; perimeter
G1 X187.125 Y68.757 E0.14897 ; perimeter
G1 X190.027 Y72.215 E0.18596 ; perimeter
G1 X187.257 Y74.539 E0.14897 ; perimeter
G1 X188.110 Y75.556 E0.05471 ; perimeter
G1 X190.880 Y73.232 E0.14897 ; perimeter
G1 X194.650 Y77.724 E0.24159 ; perimeter
G1 X170.962 Y97.601 E1.27386 ; perimeter
G1 X125.060 Y97.601 E1.89097 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.833 Y97.964 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y97.601 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.100 F10800.000 ; lift Z
G1 X125.000 Y83.243 ; move to first perimeter point
G1 Z5.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.933 Y83.243 E1.23864 ; perimeter
G1 X86.217 Y75.930 E0.46869 ; perimeter
G1 X81.080 Y75.930 E0.21162 ; perimeter
G1 X66.386 Y63.600 E0.79024 ; perimeter
G1 X66.490 Y63.526 E0.00527 ; perimeter
G1 X81.125 Y75.806 E0.78706 ; perimeter
G1 X86.262 Y75.806 E0.21162 ; perimeter
G1 X94.978 Y83.119 E0.46869 ; perimeter
G1 X155.022 Y83.119 E2.47357 ; perimeter
G1 X163.738 Y75.806 E0.46869 ; perimeter
G1 X168.875 Y75.806 E0.21162 ; perimeter
G1 X183.510 Y63.526 E0.78706 ; perimeter
G1 X183.614 Y63.600 E0.00527 ; perimeter
G1 X168.920 Y75.930 E0.79024 ; perimeter
G1 X163.783 Y75.930 E0.21162 ; perimeter
G1 X155.067 Y83.243 E0.46869 ; perimeter
G1 X125.060 Y83.243 E1.23617 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y83.243 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.100 F10800.000 ; lift Z
G1 X125.000 Y98.517 ; move to first perimeter point
G1 Z5.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.704 Y98.517 E1.90718 ; perimeter
G1 X54.305 Y78.044 E1.31212 ; perimeter
G1 X54.364 Y77.932 E0.00522 ; perimeter
G1 X78.749 Y98.393 E1.31137 ; perimeter
G1 X171.251 Y98.393 E3.81065 ; perimeter
G1 X195.636 Y77.932 E1.31137 ; perimeter
G1 X195.695 Y78.044 E0.00522 ; perimeter
G1 X171.296 Y98.517 E1.31212 ; perimeter
G1 X125.060 Y98.517 E1.90471 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y98.914 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.560 Y98.914 E1.91313 ; perimeter
G1 X53.838 Y78.169 E1.32951 ; perimeter
M73 P28 R97
G1 X53.955 Y77.854 E0.01385 ; perimeter
G1 X54.085 Y77.615 E0.01119 ; perimeter
G1 X54.259 Y77.377 E0.01214 ; perimeter
G1 X65.707 Y63.734 E0.73369 ; perimeter
G1 X66.038 Y63.373 E0.02016 ; perimeter
G1 X66.182 Y63.254 E0.00772 ; perimeter
G1 X66.530 Y63.042 E0.01678 ; perimeter
G1 X81.270 Y75.410 E0.79264 ; perimeter
G1 X86.407 Y75.410 E0.21162 ; perimeter
G1 X95.122 Y82.723 E0.46869 ; perimeter
G1 X154.878 Y82.723 E2.46168 ; perimeter
G1 X163.593 Y75.410 E0.46869 ; perimeter
G1 X168.730 Y75.410 E0.21162 ; perimeter
G1 X183.470 Y63.042 E0.79264 ; perimeter
G1 X183.818 Y63.254 E0.01678 ; perimeter
G1 X183.968 Y63.378 E0.00803 ; perimeter
G1 X184.176 Y63.595 E0.01238 ; perimeter
G1 X195.741 Y77.377 E0.74119 ; perimeter
G1 X195.915 Y77.615 E0.01214 ; perimeter
G1 X196.045 Y77.854 E0.01119 ; perimeter
G1 X196.162 Y78.169 E0.01385 ; perimeter
G1 X171.440 Y98.914 E1.32951 ; perimeter
G1 X125.060 Y98.914 E1.91066 ; perimeter
M204 S1000 ; adjust acceleration
G1 X125.000 Y99.310 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.416 Y99.310 E1.91907 ; perimeter
G1 X53.393 Y78.314 E1.34563 ; perimeter
G1 X53.500 Y77.913 E0.01709 ; perimeter
G1 X53.598 Y77.681 E0.01036 ; perimeter
G1 X53.750 Y77.403 E0.01307 ; perimeter
G1 X53.947 Y77.133 E0.01376 ; perimeter
G1 X65.409 Y63.473 E0.73461 ; perimeter
G1 X65.764 Y63.086 E0.02164 ; perimeter
G1 X65.946 Y62.935 E0.00972 ; perimeter
G1 X66.220 Y62.754 E0.01355 ; perimeter
G1 X66.596 Y62.580 E0.01705 ; perimeter
G1 X81.414 Y75.014 E0.79688 ; perimeter
G1 X86.551 Y75.014 E0.21162 ; perimeter
G1 X95.266 Y82.327 E0.46869 ; perimeter
G1 X154.734 Y82.327 E2.44980 ; perimeter
G1 X163.449 Y75.014 E0.46869 ; perimeter
G1 X168.586 Y75.014 E0.21162 ; perimeter
G1 X183.404 Y62.580 E0.79688 ; perimeter
G1 X183.780 Y62.754 E0.01705 ; perimeter
G1 X184.054 Y62.935 E0.01355 ; perimeter
G1 X184.238 Y63.087 E0.00983 ; perimeter
G1 X184.471 Y63.330 E0.01385 ; perimeter
G1 X196.053 Y77.133 E0.74230 ; perimeter
G1 X196.250 Y77.403 E0.01376 ; perimeter
G1 X196.402 Y77.681 E0.01307 ; perimeter
G1 X196.500 Y77.913 E0.01036 ; perimeter
G1 X196.607 Y78.314 E0.01709 ; perimeter
G1 X171.584 Y99.310 E1.34563 ; perimeter
G1 X125.060 Y99.310 E1.91660 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.768 Y98.984 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.769 Y99.310 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.100 F10800.000 ; lift Z
G1 X124.715 Y136.143 ; move to first perimeter point
G1 Z5.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.609 Y136.143 E1.89938 ; perimeter
G1 X54.507 Y115.919 E1.29613 ; perimeter
G1 X58.786 Y110.820 E0.27424 ; perimeter
G1 X61.556 Y113.144 E0.14897 ; perimeter
G1 X61.900 Y112.734 E0.02205 ; perimeter
G1 X59.130 Y110.410 E0.14897 ; perimeter
G1 X62.541 Y106.344 E0.21861 ; perimeter
G1 X65.311 Y108.669 E0.14897 ; perimeter
G1 X65.655 Y108.259 E0.02205 ; perimeter
G1 X62.885 Y105.934 E0.14897 ; perimeter
G1 X66.021 Y102.197 E0.20100 ; perimeter
G1 X80.651 Y114.473 E0.78675 ; perimeter
G1 X85.788 Y114.473 E0.21162 ; perimeter
G1 X87.661 Y116.045 E0.10075 ; perimeter
G1 X85.668 Y118.420 E0.12775 ; perimeter
G1 X82.749 Y115.971 E0.15696 ; perimeter
G1 X82.405 Y116.381 E0.02205 ; perimeter
G1 X85.324 Y118.830 E0.15696 ; perimeter
G1 X78.648 Y126.787 E0.42789 ; perimeter
G1 X75.729 Y124.338 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.854 Y130.116 E0.15696 ; perimeter
G1 X76.264 Y130.460 E0.02205 ; perimeter
G1 X88.071 Y116.389 E0.75670 ; perimeter
G1 X94.503 Y121.786 E0.34589 ; perimeter
G1 X145.824 Y121.786 E2.11421 ; perimeter
G1 X154.926 Y121.786 E0.37496 ; perimeter
G1 X161.358 Y116.389 E0.34589 ; perimeter
G1 X173.165 Y130.460 E0.75670 ; perimeter
G1 X173.575 Y130.116 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.15696 ; perimeter
G1 X173.701 Y124.338 E0.02205 ; perimeter
G1 X170.782 Y126.787 E0.15696 ; perimeter
G1 X164.106 Y118.830 E0.42789 ; perimeter
G1 X167.024 Y116.381 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X161.768 Y116.045 E0.12775 ; perimeter
G1 X163.642 Y114.473 E0.10075 ; perimeter
G1 X168.779 Y114.473 E0.21162 ; perimeter
G1 X183.408 Y102.197 E0.78675 ; perimeter
G1 X186.545 Y105.934 E0.20100 ; perimeter
G1 X183.775 Y108.259 E0.14897 ; perimeter
G1 X184.119 Y108.669 E0.02205 ; perimeter
G1 X186.889 Y106.344 E0.14897 ; perimeter
G1 X190.300 Y110.410 E0.21861 ; perimeter
G1 X187.530 Y112.734 E0.14897 ; perimeter
G1 X187.874 Y113.144 E0.02205 ; perimeter
G1 X190.644 Y110.820 E0.14897 ; perimeter
G1 X194.923 Y115.919 E0.27424 ; perimeter
G1 X170.821 Y136.143 E1.29613 ; perimeter
G1 X124.775 Y136.143 E1.89691 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y135.747 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.753 Y135.747 E1.89344 ; perimeter
G1 X55.065 Y115.870 E1.27386 ; perimeter
G1 X58.835 Y111.378 E0.24159 ; perimeter
G1 X61.605 Y113.702 E0.14897 ; perimeter
G1 X62.378 Y112.780 E0.04959 ; perimeter
G1 X62.458 Y112.685 E0.00512 ; perimeter
G1 X59.688 Y110.361 E0.14897 ; perimeter
G1 X62.590 Y106.903 E0.18596 ; perimeter
G1 X65.360 Y109.227 E0.14897 ; perimeter
G1 X66.213 Y108.210 E0.05471 ; perimeter
G1 X63.443 Y105.886 E0.14897 ; perimeter
G1 X66.070 Y102.755 E0.16834 ; perimeter
G1 X80.507 Y114.869 E0.77636 ; perimeter
G1 X85.644 Y114.869 E0.21162 ; perimeter
G1 X87.103 Y116.093 E0.07848 ; perimeter
G1 X85.619 Y117.862 E0.09509 ; perimeter
G1 X82.701 Y115.413 E0.15696 ; perimeter
G1 X81.847 Y116.430 E0.05471 ; perimeter
G1 X84.766 Y118.879 E0.15696 ; perimeter
G1 X78.599 Y126.229 E0.39523 ; perimeter
G1 X75.680 Y123.779 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.296 Y130.164 E0.15696 ; perimeter
G1 X76.313 Y131.018 E0.05471 ; perimeter
G1 X88.120 Y116.947 E0.75670 ; perimeter
G1 X94.359 Y122.182 E0.33550 ; perimeter
G1 X145.824 Y122.182 E2.12015 ; perimeter
G1 X155.071 Y122.182 E0.38091 ; perimeter
G1 X161.309 Y116.947 E0.33550 ; perimeter
G1 X173.116 Y131.018 E0.75670 ; perimeter
G1 X174.134 Y130.164 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.15696 ; perimeter
G1 X173.750 Y123.779 E0.05471 ; perimeter
G1 X170.831 Y126.229 E0.15696 ; perimeter
G1 X164.664 Y118.879 E0.39523 ; perimeter
G1 X167.583 Y116.430 E0.15696 ; perimeter
G1 X166.729 Y115.413 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X162.327 Y116.093 E0.09509 ; perimeter
G1 X163.786 Y114.869 E0.07848 ; perimeter
G1 X168.923 Y114.869 E0.21162 ; perimeter
G1 X183.360 Y102.755 E0.77636 ; perimeter
G1 X185.986 Y105.886 E0.16834 ; perimeter
G1 X183.216 Y108.210 E0.14897 ; perimeter
G1 X184.070 Y109.227 E0.05471 ; perimeter
G1 X186.840 Y106.903 E0.14897 ; perimeter
G1 X189.741 Y110.361 E0.18596 ; perimeter
G1 X186.971 Y112.685 E0.14897 ; perimeter
G1 X187.825 Y113.702 E0.05471 ; perimeter
G1 X190.595 Y111.378 E0.14897 ; perimeter
G1 X194.365 Y115.870 E0.24159 ; perimeter
G1 X170.677 Y135.747 E1.27386 ; perimeter
G1 X124.775 Y135.747 E1.89097 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.548 Y136.110 F10800.000 ; move inwards before travel
G1 F8640
G1 X121.483 Y135.747 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.100 F10800.000 ; lift Z
G1 X124.715 Y121.389 ; move to first perimeter point
G1 Z5.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.648 Y121.389 E1.23864 ; perimeter
G1 X85.932 Y114.076 E0.46869 ; perimeter
G1 X80.795 Y114.076 E0.21162 ; perimeter
G1 X66.101 Y101.746 E0.79024 ; perimeter
G1 X66.205 Y101.672 E0.00527 ; perimeter
G1 X80.840 Y113.952 E0.78706 ; perimeter
G1 X85.977 Y113.952 E0.21162 ; perimeter
G1 X94.693 Y121.265 E0.46869 ; perimeter
G1 X154.737 Y121.265 E2.47357 ; perimeter
G1 X163.452 Y113.952 E0.46869 ; perimeter
G1 X168.589 Y113.952 E0.21162 ; perimeter
G1 X183.225 Y101.672 E0.78706 ; perimeter
G1 X183.329 Y101.746 E0.00527 ; perimeter
G1 X168.634 Y114.076 E0.79024 ; perimeter
G1 X163.497 Y114.076 E0.21162 ; perimeter
G1 X154.782 Y121.389 E0.46869 ; perimeter
G1 X124.775 Y121.389 E1.23617 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y121.389 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.100 F10800.000 ; lift Z
G1 X124.715 Y136.663 ; move to first perimeter point
G1 Z5.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.419 Y136.663 E1.90718 ; perimeter
G1 X54.020 Y116.190 E1.31212 ; perimeter
G1 X54.079 Y116.078 E0.00522 ; perimeter
G1 X78.464 Y136.539 E1.31137 ; perimeter
M73 Q29 S98
G1 X170.965 Y136.539 E3.81065 ; perimeter
G1 X195.351 Y116.078 E1.31137 ; perimeter
G1 X195.410 Y116.190 E0.00522 ; perimeter
G1 X171.010 Y136.663 E1.31212 ; perimeter
G1 X124.775 Y136.663 E1.90471 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y137.060 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.275 Y137.060 E1.91313 ; perimeter
G1 X53.552 Y116.315 E1.32951 ; perimeter
G1 X53.670 Y116.000 E0.01385 ; perimeter
G1 X53.800 Y115.761 E0.01119 ; perimeter
G1 X53.974 Y115.523 E0.01214 ; perimeter
G1 X65.422 Y101.880 E0.73369 ; perimeter
G1 X65.753 Y101.520 E0.02016 ; perimeter
G1 X65.897 Y101.400 E0.00772 ; perimeter
G1 X66.245 Y101.188 E0.01678 ; perimeter
G1 X80.985 Y113.556 E0.79264 ; perimeter
G1 X86.122 Y113.556 E0.21162 ; perimeter
G1 X94.837 Y120.869 E0.46869 ; perimeter
G1 X154.593 Y120.869 E2.46168 ; perimeter
G1 X163.308 Y113.556 E0.46869 ; perimeter
G1 X168.445 Y113.556 E0.21162 ; perimeter
G1 X183.184 Y101.188 E0.79264 ; perimeter
G1 X183.533 Y101.400 E0.01678 ; perimeter
G1 X183.683 Y101.524 E0.00803 ; perimeter
G1 X183.891 Y101.741 E0.01238 ; perimeter
G1 X195.456 Y115.523 E0.74119 ; perimeter
G1 X195.629 Y115.761 E0.01214 ; perimeter
G1 X195.760 Y116.000 E0.01119 ; perimeter
G1 X195.877 Y116.315 E0.01385 ; perimeter
G1 X171.155 Y137.060 E1.32951 ; perimeter
G1 X124.775 Y137.060 E1.91066 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.715 Y137.456 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.131 Y137.456 E1.91907 ; perimeter
G1 X53.108 Y116.460 E1.34563 ; perimeter
G1 X53.215 Y116.059 E0.01709 ; perimeter
G1 X53.313 Y115.827 E0.01036 ; perimeter
G1 X53.465 Y115.549 E0.01307 ; perimeter
G1 X53.662 Y115.279 E0.01376 ; perimeter
G1 X65.124 Y101.619 E0.73461 ; perimeter
G1 X65.479 Y101.232 E0.02164 ; perimeter
G1 X65.661 Y101.081 E0.00972 ; perimeter
G1 X65.935 Y100.900 E0.01355 ; perimeter
G1 X66.311 Y100.726 E0.01705 ; perimeter
G1 X81.129 Y113.160 E0.79688 ; perimeter
G1 X86.266 Y113.160 E0.21162 ; perimeter
G1 X94.981 Y120.473 E0.46869 ; perimeter
G1 X154.448 Y120.473 E2.44980 ; perimeter
G1 X163.164 Y113.160 E0.46869 ; perimeter
G1 X168.301 Y113.160 E0.21162 ; perimeter
G1 X183.119 Y100.726 E0.79688 ; perimeter
G1 X183.495 Y100.900 E0.01705 ; perimeter
G1 X183.769 Y101.081 E0.01355 ; perimeter
G1 X183.953 Y101.233 E0.00983 ; perimeter
G1 X184.186 Y101.476 E0.01385 ; perimeter
G1 X195.768 Y115.279 E0.74230 ; perimeter
G1 X195.965 Y115.549 E0.01376 ; perimeter
G1 X196.117 Y115.827 E0.01307 ; perimeter
G1 X196.215 Y116.059 E0.01036 ; perimeter
G1 X196.321 Y116.460 E0.01709 ; perimeter
G1 X171.299 Y137.456 E1.34563 ; perimeter
G1 X124.775 Y137.456 E1.91660 ; perimeter
M204 S1000 ; adjust acceleration
G1 X124.483 Y137.130 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;5.75


G1 F8640
G1 X121.483 Y137.456 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;5.75
G1 X127.376 Y98.692 ; move to first perimeter point
G1 Z5.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X127.373 Y98.568 E0.00510 ; perimeter
G1 X171.314 Y98.568 E1.81018 ; perimeter
G1 X195.849 Y77.982 E1.31939 ; perimeter
G1 X195.888 Y78.071 E0.00401 ; perimeter
G1 X195.897 Y78.103 E0.00137 ; perimeter
G1 X171.359 Y98.692 E1.31956 ; perimeter
G1 X127.436 Y98.692 E1.80945 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X127.373 Y98.568 E-0.03208 ; wipe and retract
G1 X130.526 Y98.568 E-0.72792 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.350 F10800.000 ; lift Z
G1 X125.000 Y83.068 ; move to first perimeter point
G1 Z5.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.996 Y83.068 E1.23602 ; perimeter
G1 X86.281 Y75.755 E0.46869 ; perimeter
G1 X81.144 Y75.755 E0.21162 ; perimeter
G1 X66.399 Y63.383 E0.79294 ; perimeter
G1 X66.511 Y63.315 E0.00540 ; perimeter
G1 X81.189 Y75.631 E0.78933 ; perimeter
G1 X86.326 Y75.631 E0.21162 ; perimeter
G1 X95.042 Y82.944 E0.46869 ; perimeter
G1 X154.958 Y82.944 E2.46832 ; perimeter
G1 X163.674 Y75.631 E0.46869 ; perimeter
G1 X168.811 Y75.631 E0.21162 ; perimeter
G1 X183.489 Y63.315 E0.78933 ; perimeter
G1 X183.600 Y63.384 E0.00537 ; perimeter
G1 X168.856 Y75.755 E0.79287 ; perimeter
G1 X163.719 Y75.755 E0.21162 ; perimeter
G1 X155.004 Y83.068 E0.46869 ; perimeter
G1 X125.060 Y83.068 E1.23354 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y83.068 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.350 F10800.000 ; lift Z
G1 X122.624 Y98.692 ; move to first perimeter point
G1 Z5.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.641 Y98.692 E1.81192 ; perimeter
G1 X54.103 Y78.103 E1.31956 ; perimeter
M73 P29 R96
G1 X54.112 Y78.071 E0.00137 ; perimeter
G1 X54.151 Y77.982 E0.00401 ; perimeter
G1 X78.686 Y98.568 E1.31939 ; perimeter
G1 X122.627 Y98.568 E1.81018 ; perimeter
G1 X122.625 Y98.632 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X119.334 Y98.637 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.350 F10800.000 ; lift Z
G1 X126.975 Y99.089 ; move to first perimeter point
G1 Z5.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X126.968 Y98.172 E0.03776 ; perimeter
G1 X171.170 Y98.172 E1.82095 ; perimeter
G1 X195.455 Y77.795 E1.30597 ; perimeter
G1 X191.063 Y72.561 E0.28145 ; perimeter
G1 X188.298 Y74.881 E0.14870 ; perimeter
G1 X187.954 Y74.471 E0.02205 ; perimeter
G1 X190.719 Y72.151 E0.14870 ; perimeter
G1 X187.308 Y68.086 E0.21861 ; perimeter
G1 X184.543 Y70.406 E0.14870 ; perimeter
G1 X184.199 Y69.996 E0.02205 ; perimeter
G1 X186.964 Y67.676 E0.14870 ; perimeter
G1 X183.715 Y63.804 E0.20821 ; perimeter
G1 X169.000 Y76.151 E0.79134 ; perimeter
G1 X163.863 Y76.151 E0.21162 ; perimeter
G1 X161.941 Y77.764 E0.10337 ; perimeter
G1 X164.047 Y80.274 E0.13496 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.450 Y92.314 E0.02205 ; perimeter
G1 X161.531 Y78.108 E0.76391 ; perimeter
G1 X155.148 Y83.465 E0.34327 ; perimeter
G1 X145.478 Y83.465 E0.39837 ; perimeter
G1 X94.852 Y83.465 E2.08555 ; perimeter
G1 X88.469 Y78.108 E0.34326 ; perimeter
G1 X76.550 Y92.314 E0.76391 ; perimeter
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.059 Y77.764 E0.13496 ; perimeter
G1 X86.137 Y76.151 E0.10337 ; perimeter
G1 X81.000 Y76.151 E0.21162 ; perimeter
G1 X66.285 Y63.804 E0.79134 ; perimeter
G1 X63.036 Y67.676 E0.20821 ; perimeter
G1 X65.801 Y69.996 E0.14870 ; perimeter
G1 X65.457 Y70.406 E0.02205 ; perimeter
G1 X62.692 Y68.086 E0.14870 ; perimeter
G1 X59.281 Y72.151 E0.21861 ; perimeter
G1 X62.046 Y74.471 E0.14870 ; perimeter
G1 X61.702 Y74.881 E0.02205 ; perimeter
G1 X58.937 Y72.561 E0.14870 ; perimeter
G1 X54.545 Y77.795 E0.28145 ; perimeter
G1 X78.830 Y98.172 E1.30597 ; perimeter
G1 X123.032 Y98.172 E1.82095 ; perimeter
G1 X123.025 Y99.089 E0.03776 ; perimeter
G1 X78.496 Y99.089 E1.83437 ; perimeter
G1 X53.656 Y78.245 E1.33582 ; perimeter
G1 X53.665 Y78.190 E0.00231 ; perimeter
G1 X53.739 Y77.935 E0.01093 ; perimeter
G1 X53.854 Y77.672 E0.01185 ; perimeter
G1 X53.945 Y77.511 E0.00760 ; perimeter
G1 X54.125 Y77.264 E0.01258 ; perimeter
G1 X65.559 Y63.639 E0.73276 ; perimeter
G1 X65.903 Y63.263 E0.02101 ; perimeter
G1 X66.114 Y63.095 E0.01111 ; perimeter
G1 X66.281 Y62.987 E0.00817 ; perimeter
G1 X66.574 Y62.851 E0.01335 ; perimeter
G1 X81.333 Y75.235 E0.79370 ; perimeter
G1 X86.470 Y75.235 E0.21162 ; perimeter
G1 X95.186 Y82.548 E0.46869 ; perimeter
G1 X154.814 Y82.548 E2.45643 ; perimeter
G1 X163.530 Y75.235 E0.46869 ; perimeter
G1 X168.667 Y75.235 E0.21162 ; perimeter
G1 X183.428 Y62.849 E0.79382 ; perimeter
G1 X183.717 Y62.986 E0.01317 ; perimeter
G1 X183.956 Y63.145 E0.01185 ; perimeter
G1 X184.098 Y63.263 E0.00760 ; perimeter
G1 X184.310 Y63.482 E0.01258 ; perimeter
G1 X195.875 Y77.264 E0.74116 ; perimeter
G1 X196.055 Y77.511 E0.01258 ; perimeter
G1 X196.261 Y77.935 E0.01943 ; perimeter
G1 X196.344 Y78.245 E0.01322 ; perimeter
G1 X171.504 Y99.089 E1.33582 ; perimeter
G1 X127.035 Y99.089 E1.83190 ; perimeter
M204 S1000 ; adjust acceleration
G1 X126.584 Y98.716 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X126.562 Y97.776 E0.03873 ; perimeter
G1 X171.026 Y97.776 E1.83172 ; perimeter
G1 X194.896 Y77.746 E1.28370 ; perimeter
G1 X191.014 Y73.119 E0.24880 ; perimeter
G1 X188.249 Y75.440 E0.14870 ; perimeter
G1 X187.491 Y74.536 E0.04857 ; perimeter
G1 X187.396 Y74.422 E0.00614 ; perimeter
G1 X190.161 Y72.102 E0.14870 ; perimeter
G1 X187.259 Y68.644 E0.18596 ; perimeter
G1 X184.494 Y70.964 E0.14870 ; perimeter
G1 X183.736 Y70.061 E0.04857 ; perimeter
G1 X183.640 Y69.947 E0.00614 ; perimeter
G1 X186.406 Y67.627 E0.14870 ; perimeter
G1 X183.666 Y64.362 E0.17555 ; perimeter
G1 X169.144 Y76.548 E0.78095 ; perimeter
G1 X164.007 Y76.548 E0.21162 ; perimeter
G1 X162.499 Y77.813 E0.08110 ; perimeter
G1 X164.096 Y79.716 E0.10231 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.401 Y92.872 E0.05471 ; perimeter
G1 X161.482 Y78.667 E0.76391 ; perimeter
G1 X155.292 Y83.861 E0.33288 ; perimeter
G1 X145.478 Y83.861 E0.40431 ; perimeter
G1 X94.708 Y83.861 E2.09150 ; perimeter
G1 X88.518 Y78.667 E0.33288 ; perimeter
G1 X76.599 Y92.872 E0.76391 ; perimeter
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X87.501 Y77.813 E0.10231 ; perimeter
G1 X85.993 Y76.548 E0.08110 ; perimeter
G1 X80.856 Y76.548 E0.21162 ; perimeter
G1 X66.334 Y64.362 E0.78095 ; perimeter
G1 X63.594 Y67.627 E0.17555 ; perimeter
G1 X66.359 Y69.947 E0.14870 ; perimeter
G1 X65.506 Y70.964 E0.05471 ; perimeter
G1 X62.741 Y68.644 E0.14870 ; perimeter
G1 X59.839 Y72.102 E0.18596 ; perimeter
G1 X62.604 Y74.422 E0.14870 ; perimeter
G1 X62.509 Y74.536 E0.00614 ; perimeter
G1 X61.751 Y75.440 E0.04857 ; perimeter
G1 X58.986 Y73.119 E0.14870 ; perimeter
G1 X55.104 Y77.746 E0.24880 ; perimeter
G1 X78.974 Y97.776 E1.28370 ; perimeter
G1 X123.438 Y97.776 E1.83172 ; perimeter
G1 X123.416 Y98.716 E0.03873 ; perimeter
G1 X123.426 Y99.485 E0.03170 ; perimeter
G1 X78.352 Y99.485 E1.85686 ; perimeter
G1 X53.232 Y78.407 E1.35087 ; perimeter
G1 X53.276 Y78.105 E0.01256 ; perimeter
G1 X53.366 Y77.800 E0.01310 ; perimeter
G1 X53.499 Y77.494 E0.01376 ; perimeter
G1 X53.612 Y77.296 E0.00938 ; perimeter
G1 X53.813 Y77.020 E0.01405 ; perimeter
G1 X65.261 Y63.377 E0.73368 ; perimeter
G1 X65.632 Y62.972 E0.02266 ; perimeter
G1 X65.883 Y62.773 E0.01318 ; perimeter
G1 X66.084 Y62.642 E0.00989 ; perimeter
G1 X66.370 Y62.501 E0.01315 ; perimeter
G1 X66.660 Y62.405 E0.01256 ; perimeter
G1 X81.478 Y74.839 E0.79687 ; perimeter
G1 X86.615 Y74.839 E0.21162 ; perimeter
G1 X95.330 Y82.152 E0.46869 ; perimeter
G1 X154.670 Y82.152 E2.44455 ; perimeter
G1 X163.385 Y74.839 E0.46869 ; perimeter
G1 X168.522 Y74.839 E0.21162 ; perimeter
G1 X183.348 Y62.399 E0.79727 ; perimeter
G1 X183.627 Y62.499 E0.01223 ; perimeter
G1 X183.915 Y62.642 E0.01323 ; perimeter
G1 X184.193 Y62.826 E0.01376 ; perimeter
G1 X184.368 Y62.972 E0.00938 ; perimeter
G1 X184.605 Y63.217 E0.01405 ; perimeter
G1 X196.187 Y77.020 E0.74229 ; perimeter
G1 X196.388 Y77.296 E0.01405 ; perimeter
G1 X196.501 Y77.494 E0.00938 ; perimeter
G1 X196.634 Y77.800 E0.01376 ; perimeter
G1 X196.724 Y78.105 E0.01310 ; perimeter
G1 X196.768 Y78.407 E0.01256 ; perimeter
G1 X171.648 Y99.485 E1.35087 ; perimeter
G1 X126.574 Y99.485 E1.85686 ; perimeter
G1 X126.583 Y98.776 E0.02922 ; perimeter
M204 S1000 ; adjust acceleration
G1 X126.780 Y98.367 F10800.000 ; move inwards before travel
G1 F8640
G1 X126.562 Y97.776 E-0.23094 ; wipe and retract
G1 X128.853 Y97.776 E-0.52906 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.350 F10800.000 ; lift Z
G1 X127.091 Y136.838 ; move to first perimeter point
G1 Z5.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X127.088 Y136.715 E0.00510 ; perimeter
G1 X171.029 Y136.715 E1.81018 ; perimeter
G1 X195.563 Y116.128 E1.31939 ; perimeter
G1 X195.602 Y116.217 E0.00401 ; perimeter
G1 X195.612 Y116.249 E0.00137 ; perimeter
G1 X171.074 Y136.838 E1.31956 ; perimeter
G1 X127.151 Y136.838 E1.80945 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X127.088 Y136.715 E-0.03208 ; wipe and retract
G1 X130.241 Y136.715 E-0.72792 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.350 F10800.000 ; lift Z
G1 X124.715 Y121.214 ; move to first perimeter point
G1 Z5.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.711 Y121.214 E1.23602 ; perimeter
G1 X85.996 Y113.901 E0.46869 ; perimeter
G1 X80.859 Y113.901 E0.21162 ; perimeter
M73 Q29 S97
G1 X66.114 Y101.529 E0.79294 ; perimeter
G1 X66.226 Y101.461 E0.00540 ; perimeter
G1 X80.904 Y113.777 E0.78933 ; perimeter
G1 X86.041 Y113.777 E0.21162 ; perimeter
G1 X94.756 Y121.090 E0.46869 ; perimeter
G1 X154.673 Y121.090 E2.46832 ; perimeter
G1 X163.389 Y113.777 E0.46869 ; perimeter
G1 X168.526 Y113.777 E0.21162 ; perimeter
G1 X183.203 Y101.461 E0.78933 ; perimeter
G1 X183.314 Y101.530 E0.00537 ; perimeter
G1 X168.571 Y113.901 E0.79287 ; perimeter
G1 X163.434 Y113.901 E0.21162 ; perimeter
G1 X154.718 Y121.214 E0.46869 ; perimeter
G1 X124.775 Y121.214 E1.23354 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y121.214 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.350 F10800.000 ; lift Z
G1 X122.339 Y136.838 ; move to first perimeter point
G1 Z5.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.355 Y136.838 E1.81192 ; perimeter
G1 X53.818 Y116.249 E1.31956 ; perimeter
G1 X53.827 Y116.217 E0.00137 ; perimeter
G1 X53.866 Y116.128 E0.00401 ; perimeter
G1 X78.401 Y136.715 E1.31939 ; perimeter
G1 X122.341 Y136.715 E1.81018 ; perimeter
G1 X122.340 Y136.778 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X119.049 Y136.783 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.350 F10800.000 ; lift Z
G1 X126.690 Y137.235 ; move to first perimeter point
G1 Z5.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X126.682 Y136.318 E0.03776 ; perimeter
G1 X170.885 Y136.318 E1.82095 ; perimeter
G1 X195.170 Y115.941 E1.30597 ; perimeter
G1 X190.778 Y110.707 E0.28145 ; perimeter
G1 X188.013 Y113.027 E0.14870 ; perimeter
G1 X187.669 Y112.617 E0.02205 ; perimeter
G1 X190.434 Y110.297 E0.14870 ; perimeter
G1 X187.023 Y106.232 E0.21861 ; perimeter
G1 X184.258 Y108.552 E0.14870 ; perimeter
G1 X183.914 Y108.142 E0.02205 ; perimeter
G1 X186.679 Y105.822 E0.14870 ; perimeter
G1 X183.430 Y101.950 E0.20821 ; perimeter
G1 X168.715 Y114.298 E0.79134 ; perimeter
G1 X163.578 Y114.298 E0.21162 ; perimeter
G1 X161.656 Y115.911 E0.10337 ; perimeter
G1 X163.762 Y118.420 E0.13496 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.165 Y130.460 E0.02205 ; perimeter
G1 X161.246 Y116.255 E0.76391 ; perimeter
G1 X154.863 Y121.611 E0.34327 ; perimeter
G1 X145.192 Y121.611 E0.39837 ; perimeter
G1 X94.567 Y121.611 E2.08555 ; perimeter
G1 X88.184 Y116.255 E0.34326 ; perimeter
G1 X76.264 Y130.460 E0.76391 ; perimeter
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X87.774 Y115.911 E0.13496 ; perimeter
G1 X85.852 Y114.298 E0.10337 ; perimeter
G1 X80.715 Y114.298 E0.21162 ; perimeter
G1 X66.000 Y101.950 E0.79134 ; perimeter
G1 X62.751 Y105.822 E0.20821 ; perimeter
G1 X65.516 Y108.142 E0.14870 ; perimeter
G1 X65.172 Y108.552 E0.02205 ; perimeter
G1 X62.407 Y106.232 E0.14870 ; perimeter
G1 X58.996 Y110.297 E0.21861 ; perimeter
G1 X61.761 Y112.617 E0.14870 ; perimeter
G1 X61.417 Y113.027 E0.02205 ; perimeter
G1 X58.652 Y110.707 E0.14870 ; perimeter
G1 X54.260 Y115.941 E0.28145 ; perimeter
G1 X78.545 Y136.318 E1.30597 ; perimeter
G1 X122.747 Y136.318 E1.82095 ; perimeter
G1 X122.739 Y137.235 E0.03776 ; perimeter
G1 X78.211 Y137.235 E1.83437 ; perimeter
G1 X53.371 Y116.392 E1.33582 ; perimeter
G1 X53.379 Y116.336 E0.00231 ; perimeter
G1 X53.454 Y116.082 E0.01093 ; perimeter
G1 X53.569 Y115.818 E0.01185 ; perimeter
G1 X53.660 Y115.658 E0.00760 ; perimeter
G1 X53.840 Y115.411 E0.01258 ; perimeter
G1 X65.273 Y101.785 E0.73276 ; perimeter
G1 X65.618 Y101.409 E0.02101 ; perimeter
G1 X65.829 Y101.241 E0.01111 ; perimeter
G1 X65.995 Y101.133 E0.00817 ; perimeter
G1 X66.289 Y100.997 E0.01335 ; perimeter
G1 X81.048 Y113.381 E0.79370 ; perimeter
G1 X86.185 Y113.381 E0.21162 ; perimeter
G1 X94.901 Y120.694 E0.46869 ; perimeter
G1 X154.529 Y120.694 E2.45643 ; perimeter
G1 X163.244 Y113.381 E0.46869 ; perimeter
G1 X168.381 Y113.381 E0.21162 ; perimeter
G1 X183.143 Y100.995 E0.79382 ; perimeter
G1 X183.431 Y101.132 E0.01317 ; perimeter
G1 X183.671 Y101.291 E0.01185 ; perimeter
G1 X183.813 Y101.409 E0.00760 ; perimeter
G1 X184.025 Y101.629 E0.01258 ; perimeter
G1 X195.590 Y115.411 E0.74116 ; perimeter
G1 X195.769 Y115.658 E0.01258 ; perimeter
G1 X195.976 Y116.082 E0.01943 ; perimeter
G1 X196.058 Y116.392 E0.01322 ; perimeter
G1 X171.218 Y137.235 E1.33582 ; perimeter
G1 X126.750 Y137.235 E1.83190 ; perimeter
M204 S1000 ; adjust acceleration
G1 X126.299 Y136.862 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X126.277 Y135.922 E0.03873 ; perimeter
G1 X170.741 Y135.922 E1.83172 ; perimeter
G1 X194.611 Y115.892 E1.28370 ; perimeter
G1 X190.729 Y111.266 E0.24880 ; perimeter
G1 X187.964 Y113.586 E0.14870 ; perimeter
G1 X187.206 Y112.683 E0.04857 ; perimeter
G1 X187.110 Y112.568 E0.00614 ; perimeter
G1 X189.876 Y110.248 E0.14870 ; perimeter
G1 X186.974 Y106.790 E0.18596 ; perimeter
G1 X184.209 Y109.110 E0.14870 ; perimeter
G1 X183.451 Y108.207 E0.04857 ; perimeter
G1 X183.355 Y108.093 E0.00614 ; perimeter
G1 X186.120 Y105.773 E0.14870 ; perimeter
G1 X183.381 Y102.509 E0.17555 ; perimeter
G1 X168.859 Y114.694 E0.78095 ; perimeter
G1 X163.722 Y114.694 E0.21162 ; perimeter
G1 X162.214 Y115.959 E0.08110 ; perimeter
M73 P30 R95
G1 X163.810 Y117.862 E0.10231 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.116 Y131.018 E0.05471 ; perimeter
G1 X161.197 Y116.813 E0.76391 ; perimeter
G1 X155.007 Y122.007 E0.33288 ; perimeter
G1 X145.192 Y122.007 E0.40431 ; perimeter
G1 X94.423 Y122.007 E2.09150 ; perimeter
G1 X88.233 Y116.813 E0.33288 ; perimeter
G1 X76.313 Y131.018 E0.76391 ; perimeter
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X87.215 Y115.959 E0.10231 ; perimeter
G1 X85.707 Y114.694 E0.08110 ; perimeter
G1 X80.570 Y114.694 E0.21162 ; perimeter
G1 X66.048 Y102.509 E0.78095 ; perimeter
G1 X63.309 Y105.773 E0.17555 ; perimeter
G1 X66.074 Y108.093 E0.14870 ; perimeter
G1 X65.221 Y109.110 E0.05471 ; perimeter
G1 X62.456 Y106.790 E0.14870 ; perimeter
G1 X59.554 Y110.248 E0.18596 ; perimeter
G1 X62.319 Y112.568 E0.14870 ; perimeter
G1 X62.223 Y112.683 E0.00614 ; perimeter
G1 X61.466 Y113.586 E0.04857 ; perimeter
G1 X58.700 Y111.266 E0.14870 ; perimeter
G1 X54.818 Y115.892 E0.24880 ; perimeter
G1 X78.689 Y135.922 E1.28370 ; perimeter
G1 X123.153 Y135.922 E1.83172 ; perimeter
G1 X123.131 Y136.862 E0.03873 ; perimeter
G1 X123.141 Y137.631 E0.03170 ; perimeter
G1 X78.067 Y137.631 E1.85686 ; perimeter
G1 X52.947 Y116.553 E1.35087 ; perimeter
G1 X52.991 Y116.251 E0.01256 ; perimeter
G1 X53.081 Y115.946 E0.01310 ; perimeter
G1 X53.214 Y115.640 E0.01376 ; perimeter
G1 X53.327 Y115.442 E0.00938 ; perimeter
G1 X53.528 Y115.166 E0.01405 ; perimeter
G1 X64.975 Y101.523 E0.73368 ; perimeter
G1 X65.347 Y101.118 E0.02266 ; perimeter
G1 X65.598 Y100.919 E0.01318 ; perimeter
G1 X65.799 Y100.788 E0.00989 ; perimeter
G1 X66.085 Y100.647 E0.01315 ; perimeter
G1 X66.375 Y100.551 E0.01256 ; perimeter
G1 X81.193 Y112.985 E0.79687 ; perimeter
G1 X86.330 Y112.985 E0.21162 ; perimeter
G1 X95.045 Y120.298 E0.46869 ; perimeter
G1 X154.385 Y120.298 E2.44455 ; perimeter
G1 X163.100 Y112.985 E0.46869 ; perimeter
G1 X168.237 Y112.985 E0.21162 ; perimeter
G1 X183.063 Y100.545 E0.79727 ; perimeter
G1 X183.342 Y100.645 E0.01223 ; perimeter
G1 X183.630 Y100.788 E0.01323 ; perimeter
G1 X183.908 Y100.972 E0.01376 ; perimeter
G1 X184.083 Y101.118 E0.00938 ; perimeter
G1 X184.320 Y101.363 E0.01405 ; perimeter
G1 X195.902 Y115.166 E0.74229 ; perimeter
G1 X196.103 Y115.442 E0.01405 ; perimeter
G1 X196.216 Y115.640 E0.00938 ; perimeter
G1 X196.349 Y115.946 E0.01376 ; perimeter
G1 X196.438 Y116.251 E0.01310 ; perimeter
G1 X196.482 Y116.553 E0.01256 ; perimeter
G1 X171.363 Y137.631 E1.35087 ; perimeter
G1 X126.289 Y137.631 E1.85686 ; perimeter
G1 X126.298 Y136.922 E0.02922 ; perimeter
M204 S1000 ; adjust acceleration
G1 X126.495 Y136.513 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;6


G1 F8640
G1 X126.277 Y135.922 E-0.23094 ; wipe and retract
G1 X128.568 Y135.922 E-0.52906 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;6
G1 X130.622 Y98.867 ; move to first perimeter point
G1 Z6.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X130.623 Y98.743 E0.00510 ; perimeter
G1 X171.378 Y98.743 E1.67895 ; perimeter
G1 X196.047 Y78.044 E1.32661 ; perimeter
G1 X196.084 Y78.173 E0.00553 ; perimeter
G1 X171.423 Y98.867 E1.32624 ; perimeter
G1 X130.682 Y98.867 E1.67836 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X130.623 Y98.743 E-0.03173 ; wipe and retract
G1 X133.777 Y98.743 E-0.72827 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.600 F10800.000 ; lift Z
G1 X125.000 Y82.893 ; move to first perimeter point
G1 Z6.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.060 Y82.893 E1.23339 ; perimeter
G1 X86.345 Y75.580 E0.46869 ; perimeter
G1 X81.208 Y75.580 E0.21162 ; perimeter
G1 X66.428 Y63.178 E0.79484 ; perimeter
G1 X66.548 Y63.119 E0.00553 ; perimeter
G1 X81.253 Y75.456 E0.79076 ; perimeter
G1 X86.390 Y75.456 E0.21162 ; perimeter
G1 X95.105 Y82.769 E0.46869 ; perimeter
G1 X154.895 Y82.769 E2.46307 ; perimeter
G1 X163.610 Y75.456 E0.46869 ; perimeter
G1 X168.747 Y75.456 E0.21162 ; perimeter
G1 X183.451 Y63.118 E0.79074 ; perimeter
G1 X183.572 Y63.178 E0.00557 ; perimeter
G1 X168.792 Y75.580 E0.79484 ; perimeter
G1 X163.655 Y75.580 E0.21162 ; perimeter
G1 X154.940 Y82.893 E0.46869 ; perimeter
G1 X125.060 Y82.893 E1.23092 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y82.893 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.600 F10800.000 ; lift Z
G1 X119.378 Y98.867 ; move to first perimeter point
G1 Z6.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.577 Y98.867 E1.68083 ; perimeter
G1 X53.916 Y78.174 E1.32622 ; perimeter
G1 X53.953 Y78.044 E0.00557 ; perimeter
G1 X78.622 Y98.743 E1.32661 ; perimeter
G1 X119.377 Y98.743 E1.67895 ; perimeter
G1 X119.378 Y98.807 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X116.086 Y98.812 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.600 F10800.000 ; lift Z
G1 X130.224 Y99.264 ; move to first perimeter point
G1 Z6.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X130.228 Y98.347 E0.03776 ; perimeter
G1 X171.234 Y98.347 E1.68928 ; perimeter
G1 X195.701 Y77.816 E1.31580 ; perimeter
G1 X191.197 Y72.448 E0.28867 ; perimeter
G1 X188.437 Y74.764 E0.14843 ; perimeter
G1 X188.093 Y74.354 E0.02205 ; perimeter
G1 X190.853 Y72.038 E0.14843 ; perimeter
G1 X187.442 Y67.973 E0.21861 ; perimeter
G1 X184.682 Y70.289 E0.14843 ; perimeter
G1 X184.338 Y69.879 E0.02205 ; perimeter
G1 X187.098 Y67.563 E0.14843 ; perimeter
G1 X183.737 Y63.557 E0.21542 ; perimeter
G1 X168.936 Y75.976 E0.79592 ; perimeter
G1 X163.799 Y75.976 E0.21162 ; perimeter
G1 X161.828 Y77.630 E0.10600 ; perimeter
G1 X164.047 Y80.274 E0.14217 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.450 Y92.314 E0.02205 ; perimeter
G1 X161.418 Y77.974 E0.77112 ; perimeter
G1 X155.084 Y83.289 E0.34064 ; perimeter
G1 X144.846 Y83.289 E0.42177 ; perimeter
G1 X94.916 Y83.289 E2.05690 ; perimeter
G1 X88.582 Y77.974 E0.34064 ; perimeter
G1 X76.550 Y92.314 E0.77112 ; perimeter
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.172 Y77.630 E0.14217 ; perimeter
G1 X86.201 Y75.976 E0.10600 ; perimeter
G1 X81.064 Y75.976 E0.21162 ; perimeter
G1 X66.263 Y63.557 E0.79592 ; perimeter
G1 X62.902 Y67.563 E0.21542 ; perimeter
G1 X65.662 Y69.879 E0.14843 ; perimeter
G1 X65.318 Y70.289 E0.02205 ; perimeter
G1 X62.558 Y67.973 E0.14843 ; perimeter
G1 X59.147 Y72.038 E0.21861 ; perimeter
G1 X61.907 Y74.354 E0.14843 ; perimeter
G1 X61.563 Y74.764 E0.02205 ; perimeter
G1 X58.803 Y72.448 E0.14843 ; perimeter
G1 X54.299 Y77.816 E0.28866 ; perimeter
G1 X78.766 Y98.347 E1.31580 ; perimeter
G1 X119.772 Y98.347 E1.68928 ; perimeter
G1 X119.776 Y99.264 E0.03776 ; perimeter
G1 X78.433 Y99.264 E1.70316 ; perimeter
G1 X53.485 Y78.330 E1.34161 ; perimeter
G1 X53.527 Y78.091 E0.01002 ; perimeter
G1 X53.605 Y77.822 E0.01152 ; perimeter
G1 X53.723 Y77.554 E0.01206 ; perimeter
G1 X53.991 Y77.152 E0.01993 ; perimeter
G1 X65.410 Y63.543 E0.73184 ; perimeter
G1 X65.777 Y63.142 E0.02241 ; perimeter
G1 X65.905 Y63.036 E0.00682 ; perimeter
G1 X66.149 Y62.874 E0.01206 ; perimeter
G1 X66.399 Y62.750 E0.01152 ; perimeter
G1 X66.628 Y62.667 E0.01002 ; perimeter
G1 X81.397 Y75.060 E0.79424 ; perimeter
G1 X86.534 Y75.060 E0.21162 ; perimeter
G1 X95.250 Y82.373 E0.46869 ; perimeter
G1 X154.750 Y82.373 E2.45119 ; perimeter
M73 Q30 S96
G1 X163.466 Y75.060 E0.46869 ; perimeter
G1 X168.603 Y75.060 E0.21162 ; perimeter
G1 X183.371 Y62.668 E0.79417 ; perimeter
G1 X183.602 Y62.751 E0.01013 ; perimeter
G1 X183.851 Y62.874 E0.01144 ; perimeter
G1 X184.229 Y63.147 E0.01920 ; perimeter
G1 X184.445 Y63.370 E0.01278 ; perimeter
G1 X196.009 Y77.152 E0.74113 ; perimeter
G1 X196.191 Y77.403 E0.01278 ; perimeter
G1 X196.395 Y77.822 E0.01920 ; perimeter
G1 X196.473 Y78.091 E0.01152 ; perimeter
G1 X196.515 Y78.330 E0.01002 ; perimeter
G1 X171.567 Y99.264 E1.34161 ; perimeter
G1 X130.284 Y99.264 E1.70069 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X130.228 Y98.347 E-0.21204 ; wipe and retract
G1 X132.601 Y98.347 E-0.54796 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.600 F10800.000 ; lift Z
G1 X129.833 Y97.951 ; move to first perimeter point
G1 Z6.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.089 Y97.951 E1.69960 ; perimeter
G1 X195.143 Y77.767 E1.29353 ; perimeter
G1 X191.148 Y73.007 E0.25601 ; perimeter
G1 X188.388 Y75.323 E0.14843 ; perimeter
G1 X187.647 Y74.439 E0.04755 ; perimeter
G1 X187.535 Y74.305 E0.00716 ; perimeter
G1 X190.295 Y71.990 E0.14843 ; perimeter
G1 X187.393 Y68.532 E0.18596 ; perimeter
G1 X184.633 Y70.848 E0.14843 ; perimeter
G1 X183.891 Y69.963 E0.04755 ; perimeter
G1 X183.780 Y69.830 E0.00716 ; perimeter
G1 X186.540 Y67.514 E0.14843 ; perimeter
G1 X183.688 Y64.116 E0.18276 ; perimeter
G1 X169.081 Y76.373 E0.78554 ; perimeter
G1 X163.944 Y76.373 E0.21162 ; perimeter
G1 X162.387 Y77.679 E0.08373 ; perimeter
G1 X164.096 Y79.716 E0.10952 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.401 Y92.872 E0.05471 ; perimeter
G1 X161.370 Y78.533 E0.77112 ; perimeter
G1 X155.228 Y83.686 E0.33026 ; perimeter
G1 X144.846 Y83.686 E0.42771 ; perimeter
G1 X94.772 Y83.686 E2.06284 ; perimeter
G1 X88.631 Y78.533 E0.33026 ; perimeter
G1 X76.599 Y92.872 E0.77112 ; perimeter
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X87.613 Y77.679 E0.10952 ; perimeter
G1 X86.056 Y76.373 E0.08373 ; perimeter
G1 X80.919 Y76.373 E0.21162 ; perimeter
G1 X66.312 Y64.116 E0.78554 ; perimeter
G1 X63.460 Y67.514 E0.18276 ; perimeter
G1 X66.220 Y69.830 E0.14843 ; perimeter
G1 X65.367 Y70.848 E0.05471 ; perimeter
G1 X62.607 Y68.532 E0.14843 ; perimeter
G1 X59.705 Y71.990 E0.18596 ; perimeter
G1 X62.465 Y74.305 E0.14843 ; perimeter
G1 X62.353 Y74.439 E0.00716 ; perimeter
G1 X61.612 Y75.323 E0.04755 ; perimeter
G1 X58.852 Y73.007 E0.14843 ; perimeter
G1 X54.857 Y77.767 E0.25601 ; perimeter
G1 X78.911 Y97.951 E1.29353 ; perimeter
G1 X120.167 Y97.951 E1.69960 ; perimeter
G1 X120.174 Y99.660 E0.07042 ; perimeter
G1 X78.288 Y99.660 E1.72549 ; perimeter
G1 X53.076 Y78.504 E1.35588 ; perimeter
G1 X53.091 Y78.281 E0.00922 ; perimeter
G1 X53.140 Y78.000 E0.01172 ; perimeter
G1 X53.232 Y77.687 E0.01347 ; perimeter
G1 X53.368 Y77.376 E0.01397 ; perimeter
G1 X53.475 Y77.187 E0.00893 ; perimeter
G1 X53.679 Y76.908 E0.01425 ; perimeter
G1 X65.112 Y63.282 E0.73276 ; perimeter
G1 X65.503 Y62.854 E0.02388 ; perimeter
G1 X65.668 Y62.717 E0.00881 ; perimeter
G1 X65.950 Y62.530 E0.01397 ; perimeter
G1 X66.243 Y62.385 E0.01347 ; perimeter
G1 X66.511 Y62.288 E0.01172 ; perimeter
G1 X66.728 Y62.234 E0.00922 ; perimeter
G1 X81.541 Y74.663 E0.79662 ; perimeter
G1 X86.678 Y74.663 E0.21162 ; perimeter
G1 X95.394 Y81.977 E0.46869 ; perimeter
G1 X154.606 Y81.977 E2.43930 ; perimeter
G1 X163.322 Y74.663 E0.46869 ; perimeter
G1 X168.459 Y74.663 E0.21162 ; perimeter
G1 X183.272 Y62.233 E0.79665 ; perimeter
G1 X183.757 Y62.385 E0.02093 ; perimeter
G1 X184.050 Y62.530 E0.01345 ; perimeter
G1 X184.332 Y62.717 E0.01397 ; perimeter
G1 X184.499 Y62.856 E0.00893 ; perimeter
G1 X184.739 Y63.105 E0.01425 ; perimeter
G1 X196.321 Y76.908 E0.74228 ; perimeter
G1 X196.525 Y77.187 E0.01425 ; perimeter
G1 X196.632 Y77.376 E0.00893 ; perimeter
G1 X196.768 Y77.687 E0.01397 ; perimeter
G1 X196.860 Y78.000 E0.01347 ; perimeter
G1 X196.909 Y78.281 E0.01172 ; perimeter
G1 X196.924 Y78.504 E0.00922 ; perimeter
G1 X171.712 Y99.660 E1.35588 ; perimeter
G1 X129.826 Y99.660 E1.72549 ; perimeter
G1 X129.833 Y98.011 E0.06794 ; perimeter
M204 S1000 ; adjust acceleration
G1 X130.233 Y97.956 F10800.000 ; move inwards before travel
G1 F8640
G1 X133.124 Y98.006 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.600 F10800.000 ; lift Z
G1 X130.337 Y137.013 ; move to first perimeter point
G1 Z6.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X130.337 Y136.890 E0.00510 ; perimeter
G1 X171.093 Y136.890 E1.67895 ; perimeter
G1 X195.761 Y116.190 E1.32661 ; perimeter
G1 X195.799 Y116.319 E0.00553 ; perimeter
G1 X171.138 Y137.013 E1.32624 ; perimeter
G1 X130.397 Y137.013 E1.67836 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X130.337 Y136.890 E-0.03173 ; wipe and retract
G1 X133.491 Y136.890 E-0.72827 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.600 F10800.000 ; lift Z
G1 X124.715 Y121.039 ; move to first perimeter point
G1 Z6.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.775 Y121.039 E1.23339 ; perimeter
G1 X86.060 Y113.726 E0.46869 ; perimeter
G1 X80.923 Y113.726 E0.21162 ; perimeter
G1 X66.142 Y101.324 E0.79484 ; perimeter
G1 X66.263 Y101.265 E0.00553 ; perimeter
G1 X80.968 Y113.602 E0.79076 ; perimeter
G1 X86.105 Y113.602 E0.21162 ; perimeter
G1 X94.820 Y120.915 E0.46869 ; perimeter
M73 P31 R94
G1 X154.610 Y120.915 E2.46307 ; perimeter
G1 X163.325 Y113.602 E0.46869 ; perimeter
G1 X168.462 Y113.602 E0.21162 ; perimeter
G1 X183.166 Y101.264 E0.79074 ; perimeter
G1 X183.287 Y101.324 E0.00557 ; perimeter
G1 X168.507 Y113.726 E0.79484 ; perimeter
G1 X163.370 Y113.726 E0.21162 ; perimeter
G1 X154.655 Y121.039 E0.46869 ; perimeter
G1 X124.775 Y121.039 E1.23092 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y121.039 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.600 F10800.000 ; lift Z
G1 X119.093 Y137.013 ; move to first perimeter point
G1 Z6.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.292 Y137.013 E1.68083 ; perimeter
G1 X53.630 Y116.320 E1.32622 ; perimeter
G1 X53.668 Y116.190 E0.00557 ; perimeter
G1 X78.337 Y136.890 E1.32661 ; perimeter
G1 X119.092 Y136.890 E1.67895 ; perimeter
G1 X119.093 Y136.953 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X115.801 Y136.958 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.600 F10800.000 ; lift Z
G1 X129.939 Y137.410 ; move to first perimeter point
G1 Z6.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X129.942 Y136.493 E0.03776 ; perimeter
G1 X170.949 Y136.493 E1.68928 ; perimeter
G1 X195.416 Y115.962 E1.31580 ; perimeter
G1 X190.912 Y110.595 E0.28867 ; perimeter
G1 X188.152 Y112.911 E0.14843 ; perimeter
G1 X187.808 Y112.500 E0.02205 ; perimeter
G1 X190.568 Y110.185 E0.14843 ; perimeter
G1 X187.157 Y106.119 E0.21861 ; perimeter
G1 X184.397 Y108.435 E0.14843 ; perimeter
G1 X184.053 Y108.025 E0.02205 ; perimeter
G1 X186.813 Y105.709 E0.14843 ; perimeter
G1 X183.452 Y101.704 E0.21542 ; perimeter
G1 X168.651 Y114.123 E0.79592 ; perimeter
G1 X163.514 Y114.123 E0.21162 ; perimeter
G1 X161.543 Y115.776 E0.10600 ; perimeter
G1 X163.762 Y118.420 E0.14217 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.165 Y130.460 E0.02205 ; perimeter
G1 X161.133 Y116.121 E0.77112 ; perimeter
G1 X154.799 Y121.436 E0.34064 ; perimeter
G1 X144.561 Y121.436 E0.42177 ; perimeter
G1 X94.631 Y121.436 E2.05690 ; perimeter
G1 X88.296 Y116.121 E0.34064 ; perimeter
G1 X76.264 Y130.460 E0.77112 ; perimeter
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X87.886 Y115.776 E0.14217 ; perimeter
G1 X85.915 Y114.123 E0.10600 ; perimeter
G1 X80.778 Y114.123 E0.21162 ; perimeter
G1 X65.978 Y101.704 E0.79592 ; perimeter
G1 X62.617 Y105.709 E0.21542 ; perimeter
G1 X65.377 Y108.025 E0.14843 ; perimeter
G1 X65.033 Y108.435 E0.02205 ; perimeter
G1 X62.273 Y106.119 E0.14843 ; perimeter
G1 X58.862 Y110.185 E0.21861 ; perimeter
G1 X61.622 Y112.500 E0.14843 ; perimeter
G1 X61.278 Y112.911 E0.02205 ; perimeter
G1 X58.518 Y110.595 E0.14843 ; perimeter
G1 X54.013 Y115.962 E0.28866 ; perimeter
G1 X78.481 Y136.493 E1.31580 ; perimeter
G1 X119.487 Y136.493 E1.68928 ; perimeter
G1 X119.491 Y137.410 E0.03776 ; perimeter
G1 X78.147 Y137.410 E1.70316 ; perimeter
G1 X53.200 Y116.476 E1.34161 ; perimeter
G1 X53.242 Y116.237 E0.01002 ; perimeter
G1 X53.320 Y115.968 E0.01152 ; perimeter
G1 X53.438 Y115.700 E0.01206 ; perimeter
G1 X53.706 Y115.298 E0.01993 ; perimeter
G1 X65.125 Y101.689 E0.73184 ; perimeter
G1 X65.492 Y101.288 E0.02241 ; perimeter
G1 X65.620 Y101.182 E0.00682 ; perimeter
G1 X65.863 Y101.020 E0.01206 ; perimeter
G1 X66.114 Y100.896 E0.01152 ; perimeter
G1 X66.343 Y100.813 E0.01002 ; perimeter
G1 X81.112 Y113.206 E0.79424 ; perimeter
G1 X86.249 Y113.206 E0.21162 ; perimeter
G1 X94.964 Y120.519 E0.46869 ; perimeter
G1 X154.465 Y120.519 E2.45119 ; perimeter
G1 X163.181 Y113.206 E0.46869 ; perimeter
G1 X168.318 Y113.206 E0.21162 ; perimeter
G1 X183.085 Y100.814 E0.79417 ; perimeter
G1 X183.317 Y100.897 E0.01013 ; perimeter
G1 X183.566 Y101.020 E0.01144 ; perimeter
G1 X183.944 Y101.293 E0.01920 ; perimeter
G1 X184.159 Y101.516 E0.01278 ; perimeter
G1 X195.724 Y115.298 E0.74113 ; perimeter
G1 X195.906 Y115.549 E0.01278 ; perimeter
G1 X196.109 Y115.968 E0.01920 ; perimeter
G1 X196.188 Y116.237 E0.01152 ; perimeter
G1 X196.230 Y116.476 E0.01002 ; perimeter
G1 X171.282 Y137.410 E1.34161 ; perimeter
G1 X129.999 Y137.410 E1.70069 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X129.942 Y136.493 E-0.21204 ; wipe and retract
G1 X132.316 Y136.493 E-0.54796 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.600 F10800.000 ; lift Z
G1 X129.548 Y136.097 ; move to first perimeter point
G1 Z6.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X170.804 Y136.097 E1.69960 ; perimeter
G1 X194.858 Y115.914 E1.29353 ; perimeter
G1 X190.863 Y111.153 E0.25601 ; perimeter
G1 X188.103 Y113.469 E0.14843 ; perimeter
G1 X187.361 Y112.585 E0.04755 ; perimeter
G1 X187.250 Y112.452 E0.00716 ; perimeter
G1 X190.010 Y110.136 E0.14843 ; perimeter
G1 X187.108 Y106.678 E0.18596 ; perimeter
G1 X184.348 Y108.994 E0.14843 ; perimeter
G1 X183.606 Y108.110 E0.04755 ; perimeter
G1 X183.494 Y107.976 E0.00716 ; perimeter
G1 X186.254 Y105.660 E0.14843 ; perimeter
G1 X183.403 Y102.262 E0.18276 ; perimeter
G1 X168.796 Y114.519 E0.78554 ; perimeter
G1 X163.659 Y114.519 E0.21162 ; perimeter
G1 X162.102 Y115.825 E0.08373 ; perimeter
G1 X163.810 Y117.862 E0.10952 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.116 Y131.018 E0.05471 ; perimeter
G1 X161.084 Y116.679 E0.77112 ; perimeter
G1 X154.943 Y121.832 E0.33026 ; perimeter
G1 X144.561 Y121.832 E0.42771 ; perimeter
G1 X94.486 Y121.832 E2.06284 ; perimeter
G1 X88.345 Y116.679 E0.33026 ; perimeter
G1 X76.313 Y131.018 E0.77112 ; perimeter
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X87.328 Y115.825 E0.10952 ; perimeter
G1 X85.771 Y114.519 E0.08373 ; perimeter
G1 X80.634 Y114.519 E0.21162 ; perimeter
G1 X66.027 Y102.262 E0.78554 ; perimeter
G1 X63.175 Y105.660 E0.18276 ; perimeter
G1 X65.935 Y107.976 E0.14843 ; perimeter
G1 X65.082 Y108.994 E0.05471 ; perimeter
G1 X62.322 Y106.678 E0.14843 ; perimeter
G1 X59.420 Y110.136 E0.18596 ; perimeter
G1 X62.180 Y112.452 E0.14843 ; perimeter
G1 X62.068 Y112.585 E0.00716 ; perimeter
G1 X61.326 Y113.469 E0.04755 ; perimeter
G1 X58.566 Y111.153 E0.14843 ; perimeter
G1 X54.572 Y115.914 E0.25601 ; perimeter
G1 X78.625 Y136.097 E1.29353 ; perimeter
G1 X119.882 Y136.097 E1.69960 ; perimeter
G1 X119.888 Y137.806 E0.07042 ; perimeter
G1 X78.003 Y137.806 E1.72549 ; perimeter
G1 X52.790 Y116.650 E1.35588 ; perimeter
G1 X52.806 Y116.427 E0.00922 ; perimeter
G1 X52.855 Y116.147 E0.01172 ; perimeter
G1 X52.947 Y115.833 E0.01347 ; perimeter
G1 X53.083 Y115.522 E0.01397 ; perimeter
G1 X53.190 Y115.334 E0.00893 ; perimeter
G1 X53.394 Y115.054 E0.01425 ; perimeter
G1 X64.827 Y101.428 E0.73276 ; perimeter
G1 X65.218 Y101.000 E0.02388 ; perimeter
G1 X65.383 Y100.864 E0.00881 ; perimeter
G1 X65.665 Y100.676 E0.01397 ; perimeter
G1 X65.958 Y100.531 E0.01347 ; perimeter
G1 X66.226 Y100.434 E0.01172 ; perimeter
G1 X66.443 Y100.380 E0.00922 ; perimeter
G1 X81.256 Y112.810 E0.79662 ; perimeter
G1 X86.393 Y112.810 E0.21162 ; perimeter
G1 X95.109 Y120.123 E0.46869 ; perimeter
G1 X154.321 Y120.123 E2.43930 ; perimeter
G1 X163.036 Y112.810 E0.46869 ; perimeter
G1 X168.173 Y112.810 E0.21162 ; perimeter
G1 X182.987 Y100.379 E0.79665 ; perimeter
G1 X183.472 Y100.531 E0.02093 ; perimeter
G1 X183.765 Y100.676 E0.01345 ; perimeter
G1 X184.047 Y100.864 E0.01397 ; perimeter
G1 X184.214 Y101.002 E0.00893 ; perimeter
G1 X184.454 Y101.251 E0.01425 ; perimeter
G1 X196.036 Y115.054 E0.74228 ; perimeter
G1 X196.239 Y115.334 E0.01425 ; perimeter
G1 X196.347 Y115.522 E0.00893 ; perimeter
G1 X196.483 Y115.833 E0.01397 ; perimeter
G1 X196.574 Y116.147 E0.01347 ; perimeter
G1 X196.624 Y116.427 E0.01172 ; perimeter
G1 X196.639 Y116.650 E0.00922 ; perimeter
G1 X171.426 Y137.806 E1.35588 ; perimeter
G1 X129.541 Y137.806 E1.72549 ; perimeter
M73 Q31 S95
G1 X129.547 Y136.157 E0.06794 ; perimeter
M204 S1000 ; adjust acceleration
G1 X129.948 Y136.102 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;6.25


G1 F8640
G1 X132.839 Y136.152 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;6.25
G1 X117.627 Y99.042 ; move to first perimeter point
G1 Z6.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.513 Y99.042 E1.61134 ; perimeter
G1 X53.748 Y78.262 E1.33181 ; perimeter
G1 X53.771 Y78.120 E0.00593 ; perimeter
G1 X78.558 Y98.918 E1.33297 ; perimeter
G1 X117.627 Y98.918 E1.60948 ; perimeter
G1 X117.627 Y98.982 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 X118.024 Y99.439 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.369 Y99.439 E1.63361 ; perimeter
G1 X53.335 Y78.433 E1.34624 ; perimeter
G1 X53.393 Y77.980 E0.01883 ; perimeter
G1 X53.472 Y77.709 E0.01162 ; perimeter
G1 X53.672 Y77.294 E0.01898 ; perimeter
G1 X53.857 Y77.039 E0.01296 ; perimeter
G1 X54.752 Y75.977 E0.05723 ; perimeter
G1 X55.259 Y76.402 E0.02726 ; perimeter
G1 X54.058 Y77.843 E0.07726 ; perimeter
G1 X78.703 Y98.522 E1.32532 ; perimeter
G1 X118.024 Y98.522 E1.61986 ; perimeter
G1 X118.024 Y99.379 E0.03529 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X114.732 Y99.384 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.850 F10800.000 ; lift Z
G1 X54.615 Y77.793 ; move to first perimeter point
G1 Z6.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.847 Y98.126 E1.30310 ; perimeter
G1 X118.420 Y98.126 E1.63024 ; perimeter
G1 X118.420 Y99.835 E0.07041 ; perimeter
G1 X78.225 Y99.835 E1.65588 ; perimeter
G1 X52.938 Y78.617 E1.35984 ; perimeter
G1 X52.953 Y78.210 E0.01678 ; perimeter
G1 X53.006 Y77.892 E0.01330 ; perimeter
G1 X53.098 Y77.573 E0.01367 ; perimeter
G1 X53.237 Y77.258 E0.01418 ; perimeter
G1 X53.339 Y77.079 E0.00849 ; perimeter
G1 X53.545 Y76.795 E0.01444 ; perimeter
G1 X54.704 Y75.419 E0.07412 ; perimeter
G1 X55.816 Y76.353 E0.05983 ; perimeter
G1 X54.654 Y77.747 E0.07479 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.431 Y78.148 F10800.000 ; move inwards before travel
G1 F8640
G1 X57.171 Y79.868 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.850 F10800.000 ; lift Z
G1 X61.424 Y74.648 ; move to first perimeter point
G1 Z6.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X58.669 Y72.336 E0.14815 ; perimeter
G1 X56.220 Y75.255 E0.15696 ; perimeter
G1 X55.712 Y74.829 E0.02729 ; perimeter
G1 X64.712 Y64.109 E0.57663 ; perimeter
G1 X65.217 Y64.532 E0.02713 ; perimeter
G1 X62.768 Y67.451 E0.15696 ; perimeter
G1 X65.523 Y69.762 E0.14815 ; perimeter
G1 X65.179 Y70.172 E0.02205 ; perimeter
G1 X62.424 Y67.861 E0.14815 ; perimeter
G1 X59.013 Y71.926 E0.21861 ; perimeter
G1 X61.768 Y74.238 E0.14815 ; perimeter
G1 X61.462 Y74.602 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X61.472 Y75.206 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X58.717 Y72.894 E0.14815 ; perimeter
G1 X56.268 Y75.813 E0.15696 ; perimeter
G1 X55.154 Y74.878 E0.05995 ; perimeter
G1 X64.664 Y63.550 E0.60929 ; perimeter
G1 X65.775 Y64.483 E0.05978 ; perimeter
G1 X63.326 Y67.402 E0.15696 ; perimeter
G1 X66.081 Y69.713 E0.14815 ; perimeter
G1 X65.228 Y70.731 E0.05471 ; perimeter
G1 X62.473 Y68.419 E0.14815 ; perimeter
G1 X59.571 Y71.877 E0.18596 ; perimeter
G1 X62.326 Y74.189 E0.14815 ; perimeter
G1 X61.511 Y75.160 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X61.198 Y74.915 F10800.000 ; move inwards before travel
G1 F8640
G1 X58.955 Y73.087 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.850 F10800.000 ; lift Z
G1 X125.000 Y82.718 ; move to first perimeter point
G1 Z6.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.124 Y82.718 E1.23077 ; perimeter
G1 X86.409 Y75.405 E0.46869 ; perimeter
G1 X81.272 Y75.405 E0.21162 ; perimeter
G1 X66.470 Y62.985 E0.79601 ; perimeter
G1 X66.604 Y62.936 E0.00590 ; perimeter
G1 X81.317 Y75.281 E0.79118 ; perimeter
G1 X86.454 Y75.281 E0.21162 ; perimeter
G1 X95.169 Y82.594 E0.46869 ; perimeter
G1 X154.831 Y82.594 E2.45782 ; perimeter
G1 X163.546 Y75.281 E0.46869 ; perimeter
G1 X168.683 Y75.281 E0.21162 ; perimeter
G1 X183.396 Y62.936 E0.79118 ; perimeter
G1 X183.530 Y62.985 E0.00590 ; perimeter
G1 X168.728 Y75.405 E0.79601 ; perimeter
G1 X163.591 Y75.405 E0.21162 ; perimeter
G1 X154.876 Y82.718 E0.46869 ; perimeter
G1 X125.060 Y82.718 E1.22830 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.769 Y82.718 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.850 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z6.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.284 Y77.496 E0.14938 ; perimeter
G1 X86.264 Y75.801 E0.10862 ; perimeter
G1 X81.127 Y75.801 E0.21162 ; perimeter
G1 X66.274 Y63.338 E0.79878 ; perimeter
G1 X66.207 Y63.409 E0.00402 ; perimeter
G1 X65.699 Y62.983 E0.02730 ; perimeter
G1 X66.014 Y62.762 E0.01585 ; perimeter
G1 X66.269 Y62.636 E0.01174 ; perimeter
G1 X66.485 Y62.557 E0.00944 ; perimeter
G1 X66.704 Y62.502 E0.00931 ; perimeter
G1 X81.461 Y74.885 E0.79359 ; perimeter
G1 X86.598 Y74.885 E0.21162 ; perimeter
G1 X95.313 Y82.198 E0.46869 ; perimeter
G1 X154.687 Y82.198 E2.44594 ; perimeter
G1 X163.402 Y74.885 E0.46869 ; perimeter
G1 X168.539 Y74.885 E0.21162 ; perimeter
G1 X183.296 Y62.502 E0.79359 ; perimeter
G1 X183.731 Y62.636 E0.01873 ; perimeter
G1 X183.986 Y62.762 E0.01174 ; perimeter
G1 X184.301 Y62.983 E0.01585 ; perimeter
G1 X183.793 Y63.409 E0.02730 ; perimeter
G1 X183.726 Y63.338 E0.00402 ; perimeter
G1 X168.873 Y75.801 E0.79878 ; perimeter
G1 X163.736 Y75.801 E0.21162 ; perimeter
G1 X161.716 Y77.496 E0.10862 ; perimeter
G1 X164.047 Y80.274 E0.14938 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.450 Y92.314 E0.02205 ; perimeter
G1 X161.306 Y77.840 E0.77833 ; perimeter
M73 P31 R93
G1 X155.020 Y83.114 E0.33802 ; perimeter
G1 X144.214 Y83.114 E0.44517 ; perimeter
G1 X94.980 Y83.114 E2.02825 ; perimeter
G1 X88.694 Y77.840 E0.33802 ; perimeter
G1 X76.588 Y92.268 E0.77586 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X87.726 Y77.545 E0.11673 ; perimeter
G1 X86.120 Y76.198 E0.08635 ; perimeter
G1 X80.983 Y76.198 E0.21162 ; perimeter
G1 X66.305 Y63.881 E0.78934 ; perimeter
G1 X66.238 Y63.952 E0.00402 ; perimeter
G1 X65.120 Y63.015 E0.06009 ; perimeter
G1 X65.373 Y62.738 E0.01543 ; perimeter
G1 X65.529 Y62.609 E0.00835 ; perimeter
G1 X65.815 Y62.418 E0.01418 ; perimeter
G1 X66.114 Y62.271 E0.01371 ; perimeter
G1 X66.368 Y62.178 E0.01116 ; perimeter
G1 X66.816 Y62.079 E0.01887 ; perimeter
G1 X81.605 Y74.488 E0.79534 ; perimeter
G1 X86.742 Y74.488 E0.21162 ; perimeter
G1 X95.458 Y81.801 E0.46869 ; perimeter
G1 X154.542 Y81.801 E2.43405 ; perimeter
G1 X163.258 Y74.488 E0.46869 ; perimeter
G1 X168.395 Y74.488 E0.21162 ; perimeter
G1 X183.184 Y62.079 E0.79534 ; perimeter
G1 X183.632 Y62.178 E0.01887 ; perimeter
G1 X183.886 Y62.271 E0.01116 ; perimeter
G1 X184.185 Y62.418 E0.01371 ; perimeter
G1 X184.471 Y62.609 E0.01418 ; perimeter
G1 X184.627 Y62.738 E0.00835 ; perimeter
G1 X184.880 Y63.015 E0.01543 ; perimeter
G1 X183.762 Y63.952 E0.06009 ; perimeter
G1 X183.695 Y63.881 E0.00402 ; perimeter
G1 X169.017 Y76.198 E0.78934 ; perimeter
G1 X163.880 Y76.198 E0.21162 ; perimeter
G1 X162.274 Y77.545 E0.08635 ; perimeter
G1 X164.096 Y79.716 E0.11673 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.401 Y92.872 E0.05471 ; perimeter
G1 X161.257 Y78.399 E0.77833 ; perimeter
G1 X155.165 Y83.511 E0.32763 ; perimeter
G1 X144.214 Y83.511 E0.45112 ; perimeter
G1 X94.835 Y83.511 E2.03419 ; perimeter
G1 X88.743 Y78.399 E0.32763 ; perimeter
G1 X76.637 Y92.826 E0.77586 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.513 Y92.481 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.850 F10800.000 ; lift Z
G1 X188.576 Y74.648 ; move to first perimeter point
G1 Z6.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X188.232 Y74.238 E0.02205 ; perimeter
G1 X190.987 Y71.926 E0.14816 ; perimeter
G1 X187.576 Y67.861 E0.21861 ; perimeter
G1 X184.821 Y70.172 E0.14816 ; perimeter
G1 X184.477 Y69.762 E0.02205 ; perimeter
G1 X187.232 Y67.451 E0.14816 ; perimeter
G1 X184.783 Y64.532 E0.15696 ; perimeter
G1 X185.291 Y64.106 E0.02730 ; perimeter
G1 X194.288 Y74.829 E0.57663 ; perimeter
G1 X193.780 Y75.255 E0.02729 ; perimeter
G1 X191.331 Y72.336 E0.15696 ; perimeter
G1 X188.622 Y74.609 E0.14568 ; perimeter
M204 S1000 ; adjust acceleration
G1 X188.528 Y75.206 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X187.674 Y74.189 E0.05471 ; perimeter
G1 X190.429 Y71.877 E0.14816 ; perimeter
G1 X187.527 Y68.419 E0.18596 ; perimeter
G1 X184.772 Y70.731 E0.14816 ; perimeter
G1 X183.919 Y69.713 E0.05471 ; perimeter
G1 X186.674 Y67.402 E0.14816 ; perimeter
G1 X184.225 Y64.483 E0.15696 ; perimeter
G1 X185.340 Y63.548 E0.05995 ; perimeter
G1 X194.846 Y74.878 E0.60929 ; perimeter
G1 X193.732 Y75.813 E0.05995 ; perimeter
G1 X191.283 Y72.894 E0.15696 ; perimeter
G1 X188.574 Y75.167 E0.14568 ; perimeter
M204 S1000 ; adjust acceleration
G1 X188.566 Y74.808 F10800.000 ; move inwards before travel
G1 F8640
G1 X187.674 Y74.189 E-0.30695 ; wipe and retract
G1 X189.177 Y72.928 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.850 F10800.000 ; lift Z
G1 X132.373 Y99.042 ; move to first perimeter point
G1 Z6.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X132.373 Y98.918 E0.00510 ; perimeter
G1 X171.442 Y98.918 E1.60948 ; perimeter
G1 X196.229 Y78.120 E1.33297 ; perimeter
G1 X196.252 Y78.262 E0.00593 ; perimeter
G1 X171.487 Y99.042 E1.33181 ; perimeter
G1 X132.433 Y99.042 E1.60886 ; perimeter
M204 S1000 ; adjust acceleration
G1 X131.976 Y99.439 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X131.976 Y98.522 E0.03776 ; perimeter
G1 X171.297 Y98.522 E1.61986 ; perimeter
G1 X195.942 Y77.843 E1.32532 ; perimeter
G1 X194.742 Y76.403 E0.07720 ; perimeter
G1 X195.252 Y75.978 E0.02737 ; perimeter
G1 X196.143 Y77.039 E0.05708 ; perimeter
G1 X196.328 Y77.294 E0.01298 ; perimeter
G1 X196.528 Y77.709 E0.01898 ; perimeter
G1 X196.607 Y77.980 E0.01162 ; perimeter
G1 X196.665 Y78.433 E0.01883 ; perimeter
G1 X171.631 Y99.439 E1.34624 ; perimeter
G1 X132.036 Y99.439 E1.63114 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X131.976 Y98.522 E-0.21209 ; wipe and retract
G1 X134.349 Y98.522 E-0.54791 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.850 F10800.000 ; lift Z
G1 X131.580 Y98.126 ; move to first perimeter point
G1 Z6.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.153 Y98.126 E1.63024 ; perimeter
G1 X195.385 Y77.793 E1.30310 ; perimeter
G1 X194.184 Y76.353 E0.07724 ; perimeter
G1 X195.301 Y75.420 E0.05998 ; perimeter
G1 X196.455 Y76.795 E0.07395 ; perimeter
G1 X196.661 Y77.079 E0.01445 ; perimeter
G1 X196.763 Y77.258 E0.00849 ; perimeter
G1 X196.902 Y77.573 E0.01418 ; perimeter
G1 X196.994 Y77.892 E0.01367 ; perimeter
G1 X197.047 Y78.210 E0.01330 ; perimeter
G1 X197.062 Y78.617 E0.01678 ; perimeter
G1 X171.775 Y99.835 E1.35984 ; perimeter
G1 X131.580 Y99.835 E1.65588 ; perimeter
G1 X131.580 Y98.186 E0.06794 ; perimeter
M204 S1000 ; adjust acceleration
G1 X131.980 Y98.131 F10800.000 ; move inwards before travel
G1 F8640
G1 X134.872 Y98.181 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.850 F10800.000 ; lift Z
G1 X117.342 Y137.188 ; move to first perimeter point
G1 Z6.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.228 Y137.188 E1.61134 ; perimeter
G1 X53.463 Y116.408 E1.33181 ; perimeter
G1 X53.486 Y116.266 E0.00593 ; perimeter
G1 X78.273 Y137.065 E1.33297 ; perimeter
G1 X117.342 Y137.065 E1.60948 ; perimeter
G1 X117.342 Y137.128 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 X117.739 Y137.585 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.084 Y137.585 E1.63361 ; perimeter
G1 X53.050 Y116.579 E1.34624 ; perimeter
G1 X53.108 Y116.126 E0.01883 ; perimeter
G1 X53.186 Y115.855 E0.01162 ; perimeter
G1 X53.387 Y115.440 E0.01898 ; perimeter
G1 X53.572 Y115.186 E0.01296 ; perimeter
G1 X54.467 Y114.123 E0.05723 ; perimeter
G1 X54.974 Y114.548 E0.02726 ; perimeter
G1 X53.773 Y115.989 E0.07726 ; perimeter
G1 X78.417 Y136.668 E1.32532 ; perimeter
G1 X117.738 Y136.668 E1.61986 ; perimeter
G1 X117.739 Y137.525 E0.03529 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X114.447 Y137.530 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.850 F10800.000 ; lift Z
G1 X54.330 Y115.939 ; move to first perimeter point
G1 Z6.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.562 Y136.272 E1.30310 ; perimeter
G1 X118.135 Y136.272 E1.63024 ; perimeter
G1 X118.135 Y137.981 E0.07041 ; perimeter
G1 X77.939 Y137.981 E1.65588 ; perimeter
G1 X52.653 Y116.763 E1.35984 ; perimeter
G1 X52.668 Y116.356 E0.01678 ; perimeter
G1 X52.720 Y116.038 E0.01330 ; perimeter
G1 X52.813 Y115.719 E0.01367 ; perimeter
G1 X52.952 Y115.404 E0.01418 ; perimeter
G1 X53.054 Y115.225 E0.00849 ; perimeter
G1 X53.259 Y114.941 E0.01444 ; perimeter
G1 X54.419 Y113.565 E0.07412 ; perimeter
G1 X55.531 Y114.499 E0.05983 ; perimeter
G1 X54.369 Y115.893 E0.07479 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.146 Y116.295 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.886 Y118.014 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.850 F10800.000 ; lift Z
G1 X61.138 Y112.794 ; move to first perimeter point
G1 Z6.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X58.383 Y110.482 E0.14815 ; perimeter
G1 X55.934 Y113.401 E0.15696 ; perimeter
G1 X55.427 Y112.975 E0.02729 ; perimeter
G1 X64.427 Y102.255 E0.57663 ; perimeter
G1 X64.932 Y102.678 E0.02713 ; perimeter
G1 X62.483 Y105.597 E0.15696 ; perimeter
G1 X65.238 Y107.908 E0.14815 ; perimeter
G1 X64.894 Y108.319 E0.02205 ; perimeter
G1 X62.139 Y106.007 E0.14815 ; perimeter
G1 X58.728 Y110.072 E0.21861 ; perimeter
G1 X61.482 Y112.384 E0.14815 ; perimeter
G1 X61.177 Y112.748 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X61.187 Y113.352 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X58.432 Y111.040 E0.14815 ; perimeter
G1 X55.983 Y113.959 E0.15696 ; perimeter
G1 X54.868 Y113.024 E0.05995 ; perimeter
G1 X64.378 Y101.697 E0.60929 ; perimeter
G1 X65.490 Y102.629 E0.05978 ; perimeter
G1 X63.041 Y105.548 E0.15696 ; perimeter
G1 X65.796 Y107.860 E0.14815 ; perimeter
G1 X64.942 Y108.877 E0.05471 ; perimeter
G1 X62.187 Y106.565 E0.14815 ; perimeter
G1 X59.286 Y110.023 E0.18596 ; perimeter
G1 X62.041 Y112.335 E0.14815 ; perimeter
G1 X61.226 Y113.306 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.913 Y113.061 F10800.000 ; move inwards before travel
G1 F8640
G1 X58.669 Y111.233 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.850 F10800.000 ; lift Z
G1 X124.715 Y120.864 ; move to first perimeter point
G1 Z6.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q32 S94
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.839 Y120.864 E1.23077 ; perimeter
G1 X86.123 Y113.551 E0.46869 ; perimeter
G1 X80.986 Y113.551 E0.21162 ; perimeter
G1 X66.184 Y101.131 E0.79601 ; perimeter
G1 X66.319 Y101.082 E0.00590 ; perimeter
G1 X81.031 Y113.427 E0.79118 ; perimeter
G1 X86.168 Y113.427 E0.21162 ; perimeter
G1 X94.884 Y120.740 E0.46869 ; perimeter
G1 X154.546 Y120.740 E2.45782 ; perimeter
G1 X163.261 Y113.427 E0.46869 ; perimeter
G1 X168.398 Y113.427 E0.21162 ; perimeter
G1 X183.110 Y101.082 E0.79118 ; perimeter
G1 X183.245 Y101.131 E0.00590 ; perimeter
G1 X168.443 Y113.551 E0.79601 ; perimeter
G1 X163.306 Y113.551 E0.21162 ; perimeter
G1 X154.591 Y120.864 E0.46869 ; perimeter
G1 X124.775 Y120.864 E1.22830 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X121.483 Y120.864 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.850 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z6.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X87.999 Y115.642 E0.14938 ; perimeter
G1 X85.979 Y113.947 E0.10862 ; perimeter
G1 X80.842 Y113.947 E0.21162 ; perimeter
G1 X65.989 Y101.484 E0.79878 ; perimeter
G1 X65.921 Y101.555 E0.00402 ; perimeter
G1 X65.414 Y101.129 E0.02730 ; perimeter
G1 X65.729 Y100.908 E0.01585 ; perimeter
G1 X65.984 Y100.782 E0.01174 ; perimeter
G1 X66.200 Y100.704 E0.00944 ; perimeter
G1 X66.419 Y100.648 E0.00931 ; perimeter
G1 X81.176 Y113.031 E0.79359 ; perimeter
G1 X86.313 Y113.031 E0.21162 ; perimeter
G1 X95.028 Y120.344 E0.46869 ; perimeter
G1 X154.402 Y120.344 E2.44594 ; perimeter
G1 X163.117 Y113.031 E0.46869 ; perimeter
G1 X168.254 Y113.031 E0.21162 ; perimeter
G1 X183.011 Y100.648 E0.79359 ; perimeter
G1 X183.445 Y100.782 E0.01873 ; perimeter
G1 X183.701 Y100.908 E0.01174 ; perimeter
G1 X184.016 Y101.129 E0.01585 ; perimeter
G1 X183.508 Y101.555 E0.02730 ; perimeter
G1 X183.441 Y101.484 E0.00402 ; perimeter
G1 X168.588 Y113.947 E0.79878 ; perimeter
G1 X163.451 Y113.947 E0.21162 ; perimeter
G1 X161.431 Y115.642 E0.10862 ; perimeter
G1 X163.762 Y118.420 E0.14938 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.165 Y130.460 E0.02205 ; perimeter
G1 X161.021 Y115.986 E0.77833 ; perimeter
G1 X154.735 Y121.261 E0.33802 ; perimeter
G1 X143.929 Y121.261 E0.44517 ; perimeter
G1 X94.694 Y121.261 E2.02825 ; perimeter
G1 X88.409 Y115.986 E0.33802 ; perimeter
G1 X76.303 Y130.414 E0.77586 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X87.441 Y115.691 E0.11673 ; perimeter
G1 X85.835 Y114.344 E0.08635 ; perimeter
G1 X80.698 Y114.344 E0.21162 ; perimeter
G1 X66.020 Y102.027 E0.78934 ; perimeter
G1 X65.953 Y102.098 E0.00402 ; perimeter
G1 X64.835 Y101.161 E0.06009 ; perimeter
G1 X65.088 Y100.884 E0.01543 ; perimeter
G1 X65.244 Y100.755 E0.00835 ; perimeter
G1 X65.530 Y100.564 E0.01418 ; perimeter
G1 X65.829 Y100.417 E0.01371 ; perimeter
G1 X66.083 Y100.324 E0.01116 ; perimeter
G1 X66.530 Y100.225 E0.01887 ; perimeter
G1 X81.320 Y112.635 E0.79534 ; perimeter
G1 X86.457 Y112.635 E0.21162 ; perimeter
G1 X95.172 Y119.948 E0.46869 ; perimeter
G1 X154.257 Y119.948 E2.43405 ; perimeter
G1 X162.973 Y112.635 E0.46869 ; perimeter
G1 X168.110 Y112.635 E0.21162 ; perimeter
G1 X182.899 Y100.225 E0.79534 ; perimeter
G1 X183.346 Y100.324 E0.01887 ; perimeter
G1 X183.601 Y100.417 E0.01116 ; perimeter
G1 X183.900 Y100.564 E0.01371 ; perimeter
G1 X184.186 Y100.755 E0.01418 ; perimeter
G1 X184.342 Y100.884 E0.00835 ; perimeter
G1 X184.594 Y101.161 E0.01543 ; perimeter
G1 X183.477 Y102.098 E0.06009 ; perimeter
G1 X183.410 Y102.027 E0.00402 ; perimeter
G1 X168.732 Y114.344 E0.78934 ; perimeter
G1 X163.595 Y114.344 E0.21162 ; perimeter
G1 X161.989 Y115.691 E0.08635 ; perimeter
G1 X163.810 Y117.862 E0.11673 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.116 Y131.018 E0.05471 ; perimeter
G1 X160.972 Y116.545 E0.77833 ; perimeter
G1 X154.879 Y121.657 E0.32763 ; perimeter
G1 X143.929 Y121.657 E0.45112 ; perimeter
G1 X94.550 Y121.657 E2.03419 ; perimeter
G1 X88.458 Y116.545 E0.32763 ; perimeter
G1 X76.352 Y130.972 E0.77586 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.227 Y130.627 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.850 F10800.000 ; lift Z
G1 X188.291 Y112.794 ; move to first perimeter point
G1 Z6.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X187.947 Y112.384 E0.02205 ; perimeter
G1 X190.702 Y110.072 E0.14816 ; perimeter
G1 X187.291 Y106.007 E0.21861 ; perimeter
G1 X184.536 Y108.319 E0.14816 ; perimeter
G1 X184.192 Y107.908 E0.02205 ; perimeter
G1 X186.947 Y105.597 E0.14816 ; perimeter
G1 X184.498 Y102.678 E0.15696 ; perimeter
G1 X185.006 Y102.252 E0.02730 ; perimeter
G1 X194.003 Y112.975 E0.57663 ; perimeter
G1 X193.495 Y113.401 E0.02729 ; perimeter
G1 X191.046 Y110.482 E0.15696 ; perimeter
G1 X188.337 Y112.755 E0.14568 ; perimeter
M204 S1000 ; adjust acceleration
G1 X188.242 Y113.352 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X187.389 Y112.335 E0.05471 ; perimeter
G1 X190.144 Y110.023 E0.14816 ; perimeter
G1 X187.242 Y106.565 E0.18596 ; perimeter
G1 X184.487 Y108.877 E0.14816 ; perimeter
G1 X183.634 Y107.860 E0.05471 ; perimeter
G1 X186.389 Y105.548 E0.14816 ; perimeter
G1 X183.940 Y102.629 E0.15696 ; perimeter
G1 X185.054 Y101.694 E0.05995 ; perimeter
G1 X194.561 Y113.024 E0.60929 ; perimeter
G1 X193.446 Y113.959 E0.05995 ; perimeter
G1 X190.997 Y111.040 E0.15696 ; perimeter
G1 X188.288 Y113.314 E0.14568 ; perimeter
M204 S1000 ; adjust acceleration
G1 X188.281 Y112.954 F10800.000 ; move inwards before travel
G1 F8640
G1 X187.389 Y112.335 E-0.30695 ; wipe and retract
G1 X188.892 Y111.074 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.850 F10800.000 ; lift Z
G1 X132.088 Y137.188 ; move to first perimeter point
G1 Z6.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 P32 R92
M204 S800 ; adjust acceleration
G1 F4800
G1 X132.088 Y137.065 E0.00510 ; perimeter
G1 X171.157 Y137.065 E1.60948 ; perimeter
G1 X195.944 Y116.266 E1.33297 ; perimeter
G1 X195.967 Y116.408 E0.00593 ; perimeter
G1 X171.202 Y137.188 E1.33181 ; perimeter
G1 X132.147 Y137.188 E1.60886 ; perimeter
M204 S1000 ; adjust acceleration
G1 X131.691 Y137.585 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X131.691 Y136.668 E0.03776 ; perimeter
G1 X171.012 Y136.668 E1.61986 ; perimeter
G1 X195.657 Y115.989 E1.32532 ; perimeter
G1 X194.457 Y114.550 E0.07720 ; perimeter
G1 X194.967 Y114.124 E0.02737 ; perimeter
G1 X195.857 Y115.185 E0.05708 ; perimeter
G1 X196.042 Y115.440 E0.01298 ; perimeter
G1 X196.243 Y115.855 E0.01898 ; perimeter
G1 X196.322 Y116.126 E0.01162 ; perimeter
G1 X196.379 Y116.579 E0.01883 ; perimeter
G1 X171.346 Y137.585 E1.34624 ; perimeter
G1 X131.751 Y137.585 E1.63114 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X131.691 Y136.668 E-0.21209 ; wipe and retract
G1 X134.064 Y136.668 E-0.54791 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.850 F10800.000 ; lift Z
G1 X131.295 Y136.272 ; move to first perimeter point
G1 Z6.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X170.868 Y136.272 E1.63024 ; perimeter
G1 X195.099 Y115.939 E1.30310 ; perimeter
G1 X193.899 Y114.499 E0.07724 ; perimeter
G1 X195.016 Y113.566 E0.05998 ; perimeter
G1 X196.170 Y114.941 E0.07395 ; perimeter
G1 X196.376 Y115.225 E0.01445 ; perimeter
G1 X196.478 Y115.404 E0.00849 ; perimeter
G1 X196.617 Y115.719 E0.01418 ; perimeter
G1 X196.709 Y116.038 E0.01367 ; perimeter
G1 X196.762 Y116.356 E0.01330 ; perimeter
G1 X196.777 Y116.763 E0.01678 ; perimeter
G1 X171.490 Y137.981 E1.35984 ; perimeter
G1 X131.295 Y137.981 E1.65588 ; perimeter
G1 X131.295 Y136.332 E0.06794 ; perimeter
M204 S1000 ; adjust acceleration
G1 X131.695 Y136.278 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;6.5


G1 F8640
G1 X134.586 Y136.327 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z6.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;6.5
G1 X116.264 Y99.217 ; move to first perimeter point
G1 Z6.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.449 Y99.217 E1.55781 ; perimeter
G1 X53.596 Y78.363 E1.33653 ; perimeter
G1 X53.608 Y78.211 E0.00628 ; perimeter
G1 X78.495 Y99.094 E1.33835 ; perimeter
G1 X116.265 Y99.094 E1.55597 ; perimeter
G1 X116.265 Y99.157 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 X116.660 Y99.614 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.305 Y99.614 E1.58005 ; perimeter
G1 X53.208 Y78.555 E1.34966 ; perimeter
G1 X53.197 Y78.384 E0.00704 ; perimeter
G1 X53.220 Y78.087 E0.01226 ; perimeter
G1 X53.257 Y77.874 E0.00891 ; perimeter
G1 X53.338 Y77.595 E0.01197 ; perimeter
G1 X53.536 Y77.186 E0.01875 ; perimeter
G1 X53.723 Y76.926 E0.01318 ; perimeter
G1 X54.616 Y75.863 E0.05719 ; perimeter
G1 X55.123 Y76.289 E0.02729 ; perimeter
G1 X54.359 Y77.199 E0.04897 ; perimeter
G1 X53.874 Y77.917 E0.03569 ; perimeter
G1 X78.639 Y98.697 E1.33180 ; perimeter
G1 X116.662 Y98.697 E1.56639 ; perimeter
G1 X116.660 Y99.554 E0.03529 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X113.369 Y99.559 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.100 F10800.000 ; lift Z
G1 X54.402 Y77.843 ; move to first perimeter point
G1 Z6.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.783 Y98.301 E1.31113 ; perimeter
G1 X117.059 Y98.301 E1.57681 ; perimeter
G1 X117.055 Y100.010 E0.07041 ; perimeter
G1 X78.161 Y100.010 E1.60228 ; perimeter
G1 X52.823 Y78.749 E1.36260 ; perimeter
G1 X52.800 Y78.382 E0.01516 ; perimeter
G1 X52.826 Y78.038 E0.01419 ; perimeter
G1 X52.870 Y77.785 E0.01060 ; perimeter
G1 X52.965 Y77.460 E0.01395 ; perimeter
G1 X53.106 Y77.140 E0.01439 ; perimeter
G1 X53.202 Y76.971 E0.00804 ; perimeter
G1 X53.411 Y76.682 E0.01465 ; perimeter
G1 X54.567 Y75.304 E0.07411 ; perimeter
G1 X55.682 Y76.240 E0.05995 ; perimeter
G1 X54.676 Y77.438 E0.06446 ; perimeter
G1 X54.436 Y77.793 E0.01765 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.148 Y78.151 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.953 Y79.914 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.100 F10800.000 ; lift Z
G1 X61.284 Y74.531 ; move to first perimeter point
G1 Z6.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X58.535 Y72.223 E0.14788 ; perimeter
G1 X56.085 Y75.142 E0.15696 ; perimeter
G1 X55.578 Y74.716 E0.02729 ; perimeter
G1 X64.575 Y63.994 E0.57663 ; perimeter
G1 X65.083 Y64.419 E0.02729 ; perimeter
G1 X62.634 Y67.338 E0.15696 ; perimeter
G1 X65.384 Y69.646 E0.14788 ; perimeter
G1 X65.040 Y70.056 E0.02205 ; perimeter
G1 X62.290 Y67.748 E0.14788 ; perimeter
G1 X58.879 Y71.813 E0.21861 ; perimeter
G1 X61.629 Y74.121 E0.14788 ; perimeter
G1 X61.323 Y74.485 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X61.333 Y75.089 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X58.583 Y72.782 E0.14788 ; perimeter
G1 X56.134 Y75.700 E0.15696 ; perimeter
G1 X55.020 Y74.765 E0.05995 ; perimeter
G1 X64.526 Y63.435 E0.60929 ; perimeter
G1 X65.641 Y64.371 E0.05995 ; perimeter
G1 X63.192 Y67.289 E0.15696 ; perimeter
G1 X65.942 Y69.597 E0.14788 ; perimeter
G1 X65.088 Y70.614 E0.05471 ; perimeter
G1 X62.339 Y68.307 E0.14788 ; perimeter
G1 X59.437 Y71.765 E0.18596 ; perimeter
G1 X62.187 Y74.072 E0.14788 ; perimeter
G1 X61.372 Y75.043 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X61.059 Y74.798 F10800.000 ; move inwards before travel
G1 F8640
G1 X58.815 Y72.970 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.100 F10800.000 ; lift Z
G1 X105.312 Y82.543 ; move to first perimeter point
G1 Z6.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.188 Y82.543 E0.41708 ; perimeter
G1 X86.472 Y75.230 E0.46869 ; perimeter
G1 X81.335 Y75.230 E0.21162 ; perimeter
G1 X66.532 Y62.808 E0.79608 ; perimeter
G1 X66.680 Y62.771 E0.00629 ; perimeter
G1 X81.380 Y75.106 E0.79055 ; perimeter
G1 X86.517 Y75.106 E0.21162 ; perimeter
G1 X95.233 Y82.419 E0.46869 ; perimeter
G1 X105.312 Y82.419 E0.41522 ; perimeter
G1 X105.312 Y82.483 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X102.021 Y82.503 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.100 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z6.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.397 Y77.362 E0.15660 ; perimeter
G1 X86.328 Y75.626 E0.11125 ; perimeter
G1 X81.191 Y75.626 E0.21162 ; perimeter
G1 X66.288 Y63.122 E0.80142 ; perimeter
G1 X66.092 Y63.312 E0.01129 ; perimeter
G1 X65.565 Y62.870 E0.02834 ; perimeter
G1 X65.879 Y62.650 E0.01581 ; perimeter
G1 X66.140 Y62.521 E0.01197 ; perimeter
G1 X66.343 Y62.448 E0.00891 ; perimeter
G1 X66.796 Y62.351 E0.01907 ; perimeter
G1 X81.525 Y74.710 E0.79209 ; perimeter
G1 X86.662 Y74.710 E0.21162 ; perimeter
G1 X95.377 Y82.023 E0.46869 ; perimeter
G1 X105.708 Y82.023 E0.42561 ; perimeter
G1 X105.708 Y82.939 E0.03776 ; perimeter
G1 X95.043 Y82.939 E0.43935 ; perimeter
G1 X88.807 Y77.706 E0.33539 ; perimeter
G1 X76.588 Y92.268 E0.78307 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X87.838 Y77.411 E0.12394 ; perimeter
G1 X86.184 Y76.023 E0.08898 ; perimeter
G1 X81.047 Y76.023 E0.21162 ; perimeter
G1 X66.307 Y63.655 E0.79264 ; perimeter
G1 X66.111 Y63.846 E0.01129 ; perimeter
G1 X64.986 Y62.902 E0.06046 ; perimeter
G1 X65.242 Y62.622 E0.01563 ; perimeter
G1 X65.390 Y62.500 E0.00790 ; perimeter
G1 X65.680 Y62.306 E0.01439 ; perimeter
G1 X65.984 Y62.156 E0.01395 ; perimeter
G1 X66.226 Y62.068 E0.01060 ; perimeter
G1 X66.563 Y61.983 E0.01431 ; perimeter
G1 X66.919 Y61.937 E0.01479 ; perimeter
G1 X81.669 Y74.313 E0.79321 ; perimeter
G1 X86.806 Y74.313 E0.21162 ; perimeter
G1 X95.521 Y81.626 E0.46869 ; perimeter
G1 X106.105 Y81.626 E0.43599 ; perimeter
G1 X106.105 Y83.336 E0.07041 ; perimeter
G1 X94.899 Y83.336 E0.46162 ; perimeter
G1 X88.856 Y78.265 E0.32501 ; perimeter
G1 X76.637 Y92.826 E0.78307 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.512 Y92.481 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.100 F10800.000 ; lift Z
G1 X144.688 Y82.543 ; move to first perimeter point
G1 Z6.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X144.688 Y82.419 E0.00510 ; perimeter
G1 X154.767 Y82.419 E0.41522 ; perimeter
G1 X163.483 Y75.106 E0.46869 ; perimeter
G1 X168.620 Y75.106 E0.21162 ; perimeter
G1 X183.320 Y62.771 E0.79055 ; perimeter
G1 X183.468 Y62.808 E0.00628 ; perimeter
G1 X168.665 Y75.230 E0.79608 ; perimeter
G1 X163.528 Y75.230 E0.21162 ; perimeter
G1 X154.812 Y82.543 E0.46869 ; perimeter
G1 X144.748 Y82.543 E0.41461 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X144.688 Y82.419 E-0.03178 ; wipe and retract
G1 X147.842 Y82.419 E-0.72822 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.100 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z6.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.193 Y77.706 E0.78554 ; perimeter
M73 Q32 S93
G1 X154.957 Y82.939 E0.33539 ; perimeter
G1 X144.292 Y82.939 E0.43935 ; perimeter
G1 X144.292 Y82.023 E0.03776 ; perimeter
G1 X154.623 Y82.023 E0.42561 ; perimeter
G1 X163.338 Y74.710 E0.46869 ; perimeter
G1 X168.475 Y74.710 E0.21162 ; perimeter
G1 X183.204 Y62.351 E0.79209 ; perimeter
G1 X183.657 Y62.448 E0.01907 ; perimeter
G1 X183.860 Y62.521 E0.00891 ; perimeter
G1 X184.121 Y62.650 E0.01197 ; perimeter
G1 X184.435 Y62.870 E0.01581 ; perimeter
G1 X183.908 Y63.312 E0.02834 ; perimeter
G1 X183.712 Y63.122 E0.01129 ; perimeter
G1 X168.809 Y75.626 E0.80142 ; perimeter
G1 X163.672 Y75.626 E0.21162 ; perimeter
G1 X161.603 Y77.362 E0.11125 ; perimeter
G1 X164.047 Y80.274 E0.15660 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X161.144 Y78.265 E0.78554 ; perimeter
G1 X155.101 Y83.336 E0.32501 ; perimeter
G1 X143.895 Y83.336 E0.46162 ; perimeter
G1 X143.895 Y81.626 E0.07041 ; perimeter
G1 X154.479 Y81.626 E0.43599 ; perimeter
G1 X163.194 Y74.313 E0.46869 ; perimeter
G1 X168.331 Y74.313 E0.21162 ; perimeter
G1 X183.082 Y61.936 E0.79326 ; perimeter
G1 X183.437 Y61.983 E0.01476 ; perimeter
G1 X183.774 Y62.068 E0.01431 ; perimeter
G1 X184.016 Y62.156 E0.01060 ; perimeter
G1 X184.320 Y62.306 E0.01395 ; perimeter
G1 X184.610 Y62.500 E0.01439 ; perimeter
G1 X184.758 Y62.622 E0.00790 ; perimeter
G1 X185.014 Y62.902 E0.01563 ; perimeter
G1 X183.889 Y63.846 E0.06046 ; perimeter
G1 X183.693 Y63.655 E0.01129 ; perimeter
G1 X168.953 Y76.023 E0.79264 ; perimeter
G1 X163.816 Y76.023 E0.21162 ; perimeter
G1 X162.162 Y77.411 E0.08898 ; perimeter
G1 X164.096 Y79.716 E0.12394 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.319 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.100 F10800.000 ; lift Z
G1 X188.716 Y74.531 ; move to first perimeter point
G1 Z6.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X188.371 Y74.121 E0.02205 ; perimeter
G1 X191.121 Y71.813 E0.14788 ; perimeter
G1 X187.710 Y67.748 E0.21861 ; perimeter
G1 X184.960 Y70.056 E0.14788 ; perimeter
G1 X184.616 Y69.646 E0.02205 ; perimeter
G1 X187.366 Y67.338 E0.14788 ; perimeter
G1 X184.917 Y64.419 E0.15696 ; perimeter
G1 X185.425 Y63.994 E0.02729 ; perimeter
G1 X194.422 Y74.716 E0.57663 ; perimeter
G1 X193.915 Y75.142 E0.02729 ; perimeter
G1 X191.465 Y72.223 E0.15696 ; perimeter
G1 X188.762 Y74.492 E0.14541 ; perimeter
M204 S1000 ; adjust acceleration
G1 X188.667 Y75.089 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X187.813 Y74.072 E0.05471 ; perimeter
G1 X190.563 Y71.765 E0.14788 ; perimeter
G1 X187.661 Y68.307 E0.18596 ; perimeter
G1 X184.912 Y70.614 E0.14788 ; perimeter
G1 X184.058 Y69.597 E0.05471 ; perimeter
G1 X186.808 Y67.289 E0.14788 ; perimeter
G1 X184.359 Y64.371 E0.15696 ; perimeter
G1 X185.474 Y63.435 E0.05995 ; perimeter
G1 X194.980 Y74.765 E0.60929 ; perimeter
G1 X193.866 Y75.700 E0.05995 ; perimeter
G1 X191.417 Y72.782 E0.15696 ; perimeter
G1 X188.713 Y75.051 E0.14541 ; perimeter
M204 S1000 ; adjust acceleration
G1 X188.706 Y74.691 F10800.000 ; move inwards before travel
G1 F8640
G1 X187.813 Y74.072 E-0.30695 ; wipe and retract
G1 X189.316 Y72.811 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.100 F10800.000 ; lift Z
G1 X133.736 Y99.217 ; move to first perimeter point
G1 Z6.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X133.735 Y99.094 E0.00510 ; perimeter
G1 X171.505 Y99.094 E1.55597 ; perimeter
G1 X196.392 Y78.211 E1.33835 ; perimeter
G1 X196.404 Y78.363 E0.00628 ; perimeter
G1 X171.551 Y99.217 E1.33653 ; perimeter
G1 X133.796 Y99.217 E1.55534 ; perimeter
M204 S1000 ; adjust acceleration
G1 X133.340 Y99.614 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X133.338 Y98.697 E0.03776 ; perimeter
G1 X171.361 Y98.697 E1.56639 ; perimeter
G1 X196.126 Y77.917 E1.33180 ; perimeter
G1 X195.641 Y77.199 E0.03569 ; perimeter
G1 X194.877 Y76.289 E0.04897 ; perimeter
G1 X195.384 Y75.863 E0.02730 ; perimeter
G1 X196.277 Y76.926 E0.05719 ; perimeter
G1 X196.464 Y77.186 E0.01318 ; perimeter
G1 X196.662 Y77.595 E0.01875 ; perimeter
G1 X196.743 Y77.874 E0.01197 ; perimeter
G1 X196.780 Y78.087 E0.00891 ; perimeter
G1 X196.803 Y78.384 E0.01226 ; perimeter
G1 X196.792 Y78.555 E0.00704 ; perimeter
G1 X171.695 Y99.614 E1.34966 ; perimeter
G1 X133.400 Y99.614 E1.57757 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X133.338 Y98.697 E-0.21212 ; wipe and retract
G1 X135.711 Y98.697 E-0.54788 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.100 F10800.000 ; lift Z
G1 X132.941 Y98.301 ; move to first perimeter point
G1 Z6.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.217 Y98.301 E1.57681 ; perimeter
G1 X195.598 Y77.843 E1.31113 ; perimeter
G1 X195.324 Y77.438 E0.02013 ; perimeter
G1 X194.318 Y76.240 E0.06446 ; perimeter
G1 X195.433 Y75.304 E0.05995 ; perimeter
G1 X196.589 Y76.682 E0.07411 ; perimeter
G1 X196.798 Y76.971 E0.01465 ; perimeter
G1 X196.894 Y77.140 E0.00804 ; perimeter
G1 X197.035 Y77.460 E0.01439 ; perimeter
G1 X197.130 Y77.785 E0.01395 ; perimeter
G1 X197.174 Y78.038 E0.01060 ; perimeter
G1 X197.200 Y78.382 E0.01419 ; perimeter
G1 X197.177 Y78.749 E0.01516 ; perimeter
G1 X171.839 Y100.010 E1.36260 ; perimeter
G1 X132.945 Y100.010 E1.60228 ; perimeter
G1 X132.941 Y98.361 E0.06794 ; perimeter
M204 S1000 ; adjust acceleration
G1 X133.341 Y98.307 F10800.000 ; move inwards before travel
G1 F8640
G1 X136.232 Y98.356 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.100 F10800.000 ; lift Z
G1 X115.979 Y137.364 ; move to first perimeter point
G1 Z6.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.164 Y137.364 E1.55781 ; perimeter
G1 X53.311 Y116.509 E1.33653 ; perimeter
G1 X53.323 Y116.357 E0.00628 ; perimeter
G1 X78.209 Y137.240 E1.33835 ; perimeter
G1 X115.979 Y137.240 E1.55597 ; perimeter
G1 X115.979 Y137.304 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 X116.375 Y137.760 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.020 Y137.760 E1.58005 ; perimeter
G1 X52.923 Y116.701 E1.34966 ; perimeter
G1 X52.912 Y116.530 E0.00704 ; perimeter
G1 X52.934 Y116.234 E0.01226 ; perimeter
G1 X52.972 Y116.021 E0.00891 ; perimeter
G1 X53.053 Y115.742 E0.01197 ; perimeter
G1 X53.251 Y115.332 E0.01875 ; perimeter
G1 X53.438 Y115.072 E0.01318 ; perimeter
G1 X54.331 Y114.009 E0.05719 ; perimeter
G1 X54.838 Y114.435 E0.02729 ; perimeter
G1 X54.074 Y115.345 E0.04897 ; perimeter
G1 X53.589 Y116.063 E0.03569 ; perimeter
G1 X78.354 Y136.843 E1.33180 ; perimeter
G1 X116.377 Y136.843 E1.56639 ; perimeter
G1 X116.375 Y137.700 E0.03529 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X113.083 Y137.705 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.100 F10800.000 ; lift Z
G1 X54.117 Y115.989 ; move to first perimeter point
G1 Z6.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.498 Y136.447 E1.31113 ; perimeter
G1 X116.774 Y136.447 E1.57681 ; perimeter
G1 X116.770 Y138.156 E0.07041 ; perimeter
G1 X77.876 Y138.156 E1.60228 ; perimeter
M73 P33 R91
G1 X52.538 Y116.895 E1.36260 ; perimeter
G1 X52.515 Y116.528 E0.01516 ; perimeter
G1 X52.541 Y116.184 E0.01419 ; perimeter
G1 X52.585 Y115.931 E0.01060 ; perimeter
G1 X52.679 Y115.606 E0.01395 ; perimeter
G1 X52.820 Y115.286 E0.01439 ; perimeter
G1 X52.917 Y115.117 E0.00804 ; perimeter
G1 X53.126 Y114.829 E0.01465 ; perimeter
G1 X54.282 Y113.450 E0.07411 ; perimeter
G1 X55.397 Y114.386 E0.05995 ; perimeter
G1 X54.391 Y115.584 E0.06446 ; perimeter
G1 X54.151 Y115.939 E0.01765 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.863 Y116.298 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.668 Y118.060 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.100 F10800.000 ; lift Z
G1 X60.999 Y112.677 ; move to first perimeter point
G1 Z6.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X58.249 Y110.370 E0.14788 ; perimeter
G1 X55.800 Y113.288 E0.15696 ; perimeter
G1 X55.293 Y112.862 E0.02729 ; perimeter
G1 X64.290 Y102.140 E0.57663 ; perimeter
G1 X64.798 Y102.566 E0.02729 ; perimeter
G1 X62.349 Y105.484 E0.15696 ; perimeter
G1 X65.099 Y107.792 E0.14788 ; perimeter
G1 X64.754 Y108.202 E0.02205 ; perimeter
G1 X62.004 Y105.894 E0.14788 ; perimeter
G1 X58.593 Y109.960 E0.21861 ; perimeter
G1 X61.343 Y112.267 E0.14788 ; perimeter
G1 X61.038 Y112.631 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X61.048 Y113.235 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X58.298 Y110.928 E0.14788 ; perimeter
G1 X55.849 Y113.847 E0.15696 ; perimeter
G1 X54.734 Y112.911 E0.05995 ; perimeter
G1 X64.241 Y101.581 E0.60929 ; perimeter
G1 X65.356 Y102.517 E0.05995 ; perimeter
G1 X62.907 Y105.435 E0.15696 ; perimeter
G1 X65.657 Y107.743 E0.14788 ; perimeter
G1 X64.803 Y108.760 E0.05471 ; perimeter
G1 X62.053 Y106.453 E0.14788 ; perimeter
G1 X59.152 Y109.911 E0.18596 ; perimeter
G1 X61.902 Y112.218 E0.14788 ; perimeter
G1 X61.087 Y113.189 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.774 Y112.944 F10800.000 ; move inwards before travel
G1 F8640
G1 X58.530 Y111.116 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.100 F10800.000 ; lift Z
G1 X105.027 Y120.689 ; move to first perimeter point
G1 Z6.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.902 Y120.689 E0.41708 ; perimeter
G1 X86.187 Y113.376 E0.46869 ; perimeter
G1 X81.050 Y113.376 E0.21162 ; perimeter
G1 X66.247 Y100.955 E0.79608 ; perimeter
G1 X66.395 Y100.917 E0.00629 ; perimeter
G1 X81.095 Y113.252 E0.79055 ; perimeter
G1 X86.232 Y113.252 E0.21162 ; perimeter
G1 X94.948 Y120.565 E0.46869 ; perimeter
G1 X105.027 Y120.565 E0.41522 ; perimeter
G1 X105.027 Y120.629 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X101.735 Y120.649 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.100 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z6.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.111 Y115.508 E0.15660 ; perimeter
G1 X86.043 Y113.772 E0.11125 ; perimeter
G1 X80.906 Y113.772 E0.21162 ; perimeter
G1 X66.003 Y101.268 E0.80142 ; perimeter
G1 X65.806 Y101.458 E0.01129 ; perimeter
G1 X65.280 Y101.016 E0.02834 ; perimeter
G1 X65.594 Y100.796 E0.01581 ; perimeter
G1 X65.854 Y100.668 E0.01197 ; perimeter
G1 X66.058 Y100.594 E0.00891 ; perimeter
G1 X66.510 Y100.497 E0.01907 ; perimeter
G1 X81.239 Y112.856 E0.79209 ; perimeter
G1 X86.376 Y112.856 E0.21162 ; perimeter
G1 X95.092 Y120.169 E0.46869 ; perimeter
G1 X105.423 Y120.169 E0.42561 ; perimeter
G1 X105.423 Y121.086 E0.03776 ; perimeter
G1 X94.758 Y121.086 E0.43935 ; perimeter
G1 X88.522 Y115.852 E0.33539 ; perimeter
G1 X76.303 Y130.414 E0.78307 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X87.553 Y115.557 E0.12394 ; perimeter
G1 X85.899 Y114.169 E0.08898 ; perimeter
G1 X80.762 Y114.169 E0.21162 ; perimeter
G1 X66.022 Y101.801 E0.79264 ; perimeter
G1 X65.825 Y101.992 E0.01129 ; perimeter
G1 X64.701 Y101.048 E0.06046 ; perimeter
G1 X64.957 Y100.769 E0.01563 ; perimeter
G1 X65.105 Y100.646 E0.00790 ; perimeter
G1 X65.395 Y100.452 E0.01439 ; perimeter
G1 X65.699 Y100.302 E0.01395 ; perimeter
G1 X65.941 Y100.215 E0.01060 ; perimeter
G1 X66.278 Y100.129 E0.01431 ; perimeter
G1 X66.634 Y100.083 E0.01479 ; perimeter
G1 X81.384 Y112.460 E0.79321 ; perimeter
G1 X86.521 Y112.460 E0.21162 ; perimeter
G1 X95.236 Y119.773 E0.46869 ; perimeter
G1 X105.819 Y119.773 E0.43599 ; perimeter
G1 X105.819 Y121.482 E0.07041 ; perimeter
G1 X94.614 Y121.482 E0.46162 ; perimeter
G1 X88.570 Y116.411 E0.32501 ; perimeter
G1 X76.352 Y130.972 E0.78307 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.227 Y130.628 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.100 F10800.000 ; lift Z
G1 X144.403 Y120.689 ; move to first perimeter point
G1 Z6.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X144.403 Y120.565 E0.00510 ; perimeter
G1 X154.482 Y120.565 E0.41522 ; perimeter
G1 X163.197 Y113.252 E0.46869 ; perimeter
G1 X168.334 Y113.252 E0.21162 ; perimeter
G1 X183.035 Y100.917 E0.79055 ; perimeter
G1 X183.183 Y100.955 E0.00628 ; perimeter
G1 X168.380 Y113.376 E0.79608 ; perimeter
G1 X163.243 Y113.376 E0.21162 ; perimeter
G1 X154.527 Y120.689 E0.46869 ; perimeter
G1 X144.463 Y120.689 E0.41461 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X144.403 Y120.565 E-0.03178 ; wipe and retract
G1 X147.557 Y120.565 E-0.72822 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.100 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z6.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.908 Y115.852 E0.78554 ; perimeter
G1 X154.671 Y121.086 E0.33539 ; perimeter
G1 X144.007 Y121.086 E0.43935 ; perimeter
G1 X144.007 Y120.169 E0.03776 ; perimeter
G1 X154.338 Y120.169 E0.42561 ; perimeter
G1 X163.053 Y112.856 E0.46869 ; perimeter
G1 X168.190 Y112.856 E0.21162 ; perimeter
G1 X182.919 Y100.497 E0.79209 ; perimeter
G1 X183.372 Y100.594 E0.01907 ; perimeter
G1 X183.575 Y100.668 E0.00891 ; perimeter
G1 X183.836 Y100.796 E0.01197 ; perimeter
G1 X184.150 Y101.016 E0.01581 ; perimeter
G1 X183.623 Y101.458 E0.02834 ; perimeter
G1 X183.426 Y101.268 E0.01129 ; perimeter
G1 X168.524 Y113.772 E0.80142 ; perimeter
G1 X163.387 Y113.772 E0.21162 ; perimeter
G1 X161.318 Y115.508 E0.11125 ; perimeter
G1 X163.762 Y118.420 E0.15660 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.859 Y116.411 E0.78554 ; perimeter
G1 X154.816 Y121.482 E0.32501 ; perimeter
G1 X143.610 Y121.482 E0.46162 ; perimeter
G1 X143.610 Y119.773 E0.07041 ; perimeter
G1 X154.194 Y119.773 E0.43599 ; perimeter
G1 X162.909 Y112.460 E0.46869 ; perimeter
G1 X168.046 Y112.460 E0.21162 ; perimeter
G1 X182.797 Y100.082 E0.79326 ; perimeter
G1 X183.152 Y100.129 E0.01476 ; perimeter
G1 X183.489 Y100.215 E0.01431 ; perimeter
G1 X183.731 Y100.302 E0.01060 ; perimeter
G1 X184.035 Y100.452 E0.01395 ; perimeter
G1 X184.325 Y100.646 E0.01439 ; perimeter
G1 X184.472 Y100.769 E0.00790 ; perimeter
G1 X184.728 Y101.048 E0.01563 ; perimeter
G1 X183.604 Y101.992 E0.06046 ; perimeter
G1 X183.407 Y101.801 E0.01129 ; perimeter
G1 X168.668 Y114.169 E0.79264 ; perimeter
G1 X163.531 Y114.169 E0.21162 ; perimeter
G1 X161.877 Y115.557 E0.08898 ; perimeter
G1 X163.810 Y117.862 E0.12394 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.100 F10800.000 ; lift Z
G1 X188.430 Y112.677 ; move to first perimeter point
G1 Z6.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X188.086 Y112.267 E0.02205 ; perimeter
G1 X190.836 Y109.960 E0.14788 ; perimeter
G1 X187.425 Y105.894 E0.21861 ; perimeter
G1 X184.675 Y108.202 E0.14788 ; perimeter
G1 X184.331 Y107.792 E0.02205 ; perimeter
G1 X187.081 Y105.484 E0.14788 ; perimeter
G1 X184.632 Y102.566 E0.15696 ; perimeter
G1 X185.140 Y102.140 E0.02729 ; perimeter
G1 X194.137 Y112.862 E0.57663 ; perimeter
G1 X193.629 Y113.288 E0.02729 ; perimeter
G1 X191.180 Y110.370 E0.15696 ; perimeter
G1 X188.476 Y112.638 E0.14541 ; perimeter
M204 S1000 ; adjust acceleration
G1 X188.382 Y113.235 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X187.528 Y112.218 E0.05471 ; perimeter
G1 X190.278 Y109.911 E0.14788 ; perimeter
G1 X187.376 Y106.453 E0.18596 ; perimeter
G1 X184.626 Y108.760 E0.14788 ; perimeter
G1 X183.773 Y107.743 E0.05471 ; perimeter
G1 X186.523 Y105.435 E0.14788 ; perimeter
G1 X184.074 Y102.517 E0.15696 ; perimeter
G1 X185.188 Y101.581 E0.05995 ; perimeter
G1 X194.695 Y112.911 E0.60929 ; perimeter
G1 X193.580 Y113.847 E0.05995 ; perimeter
G1 X191.131 Y110.928 E0.15696 ; perimeter
G1 X188.427 Y113.197 E0.14541 ; perimeter
M204 S1000 ; adjust acceleration
G1 X188.420 Y112.837 F10800.000 ; move inwards before travel
G1 F8640
G1 X187.528 Y112.218 E-0.30695 ; wipe and retract
G1 X189.031 Y110.957 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.100 F10800.000 ; lift Z
G1 X133.450 Y137.364 ; move to first perimeter point
G1 Z6.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X133.450 Y137.240 E0.00510 ; perimeter
G1 X171.220 Y137.240 E1.55597 ; perimeter
G1 X196.107 Y116.357 E1.33835 ; perimeter
G1 X196.118 Y116.509 E0.00628 ; perimeter
G1 X171.265 Y137.364 E1.33653 ; perimeter
G1 X133.510 Y137.364 E1.55534 ; perimeter
M204 S1000 ; adjust acceleration
G1 X133.055 Y137.760 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X133.053 Y136.843 E0.03776 ; perimeter
G1 X171.076 Y136.843 E1.56639 ; perimeter
G1 X195.841 Y116.063 E1.33180 ; perimeter
G1 X195.356 Y115.345 E0.03569 ; perimeter
G1 X194.591 Y114.435 E0.04897 ; perimeter
G1 X195.099 Y114.009 E0.02730 ; perimeter
G1 X195.991 Y115.072 E0.05719 ; perimeter
G1 X196.179 Y115.332 E0.01318 ; perimeter
G1 X196.377 Y115.742 E0.01875 ; perimeter
G1 X196.458 Y116.021 E0.01197 ; perimeter
G1 X196.495 Y116.234 E0.00891 ; perimeter
G1 X196.518 Y116.530 E0.01226 ; perimeter
G1 X196.507 Y116.701 E0.00704 ; perimeter
G1 X171.410 Y137.760 E1.34966 ; perimeter
G1 X133.115 Y137.760 E1.57757 ; perimeter
M73 Q33 S92
M204 S1000 ; adjust acceleration
G1 F8640
G1 X133.053 Y136.843 E-0.21212 ; wipe and retract
G1 X135.426 Y136.843 E-0.54788 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.100 F10800.000 ; lift Z
G1 X132.656 Y136.447 ; move to first perimeter point
G1 Z6.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X170.932 Y136.447 E1.57681 ; perimeter
G1 X195.313 Y115.989 E1.31113 ; perimeter
G1 X195.039 Y115.584 E0.02013 ; perimeter
G1 X194.033 Y114.386 E0.06446 ; perimeter
G1 X195.148 Y113.450 E0.05995 ; perimeter
G1 X196.304 Y114.829 E0.07411 ; perimeter
G1 X196.513 Y115.117 E0.01465 ; perimeter
G1 X196.609 Y115.286 E0.00804 ; perimeter
G1 X196.750 Y115.606 E0.01439 ; perimeter
G1 X196.845 Y115.931 E0.01395 ; perimeter
G1 X196.889 Y116.184 E0.01060 ; perimeter
G1 X196.915 Y116.528 E0.01419 ; perimeter
G1 X196.892 Y116.895 E0.01516 ; perimeter
G1 X171.554 Y138.156 E1.36260 ; perimeter
G1 X132.660 Y138.156 E1.60228 ; perimeter
G1 X132.656 Y136.507 E0.06794 ; perimeter
M204 S1000 ; adjust acceleration
G1 X133.056 Y136.453 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;6.75


G1 F8640
G1 X135.947 Y136.502 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;6.75
G1 X134.874 Y99.392 ; move to first perimeter point
G1 Z6.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X134.874 Y99.269 E0.00510 ; perimeter
G1 X171.569 Y99.269 E1.51167 ; perimeter
G1 X196.539 Y78.316 E1.34282 ; perimeter
G1 X196.533 Y78.483 E0.00688 ; perimeter
G1 X171.614 Y99.392 E1.34006 ; perimeter
G1 X134.934 Y99.392 E1.51105 ; perimeter
M204 S1000 ; adjust acceleration
G1 X134.478 Y99.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X134.478 Y98.872 E0.03776 ; perimeter
G1 X171.425 Y98.872 E1.52207 ; perimeter
G1 X196.289 Y78.009 E1.33711 ; perimeter
G1 X195.919 Y77.286 E0.03345 ; perimeter
G1 X195.768 Y77.078 E0.01060 ; perimeter
G1 X195.011 Y76.176 E0.04851 ; perimeter
G1 X195.518 Y75.750 E0.02730 ; perimeter
G1 X196.410 Y76.813 E0.05718 ; perimeter
G1 X196.594 Y77.068 E0.01294 ; perimeter
G1 X196.795 Y77.477 E0.01877 ; perimeter
G1 X196.877 Y77.761 E0.01219 ; perimeter
G1 X196.923 Y78.052 E0.01210 ; perimeter
G1 X196.937 Y78.274 E0.00918 ; perimeter
G1 X196.910 Y78.684 E0.01694 ; perimeter
G1 X171.758 Y99.789 E1.35258 ; perimeter
G1 X134.538 Y99.789 E1.53331 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X134.478 Y98.872 E-0.21210 ; wipe and retract
G1 X136.850 Y98.872 E-0.54790 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.350 F10800.000 ; lift Z
G1 X134.081 Y98.476 ; move to first perimeter point
G1 Z6.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.281 Y98.476 E1.53248 ; perimeter
G1 X195.792 Y77.908 E1.31816 ; perimeter
G1 X195.581 Y77.494 E0.01915 ; perimeter
G1 X195.455 Y77.323 E0.00876 ; perimeter
G1 X194.452 Y76.127 E0.06429 ; perimeter
G1 X195.567 Y75.192 E0.05995 ; perimeter
G1 X196.723 Y76.570 E0.07410 ; perimeter
G1 X196.932 Y76.859 E0.01469 ; perimeter
G1 X197.169 Y77.344 E0.02224 ; perimeter
G1 X197.264 Y77.675 E0.01418 ; perimeter
G1 X197.317 Y78.007 E0.01387 ; perimeter
G1 X197.334 Y78.268 E0.01077 ; perimeter
G1 X197.321 Y78.610 E0.01409 ; perimeter
G1 X197.280 Y78.891 E0.01169 ; perimeter
G1 X171.903 Y100.185 E1.36473 ; perimeter
G1 X134.082 Y100.185 E1.55803 ; perimeter
G1 X134.081 Y98.536 E0.06794 ; perimeter
M204 S1000 ; adjust acceleration
G1 X134.481 Y98.482 F10800.000 ; move inwards before travel
G1 F8640
G1 X137.372 Y98.531 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.350 F10800.000 ; lift Z
G1 X188.855 Y74.414 ; move to first perimeter point
G1 Z6.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X188.511 Y74.004 E0.02205 ; perimeter
G1 X191.256 Y71.701 E0.14761 ; perimeter
G1 X187.844 Y67.636 E0.21861 ; perimeter
G1 X185.100 Y69.939 E0.14761 ; perimeter
G1 X184.755 Y69.529 E0.02205 ; perimeter
G1 X187.500 Y67.226 E0.14761 ; perimeter
G1 X185.051 Y64.307 E0.15696 ; perimeter
G1 X185.559 Y63.881 E0.02730 ; perimeter
G1 X194.556 Y74.604 E0.57663 ; perimeter
G1 X194.049 Y75.030 E0.02729 ; perimeter
G1 X191.600 Y72.111 E0.15696 ; perimeter
G1 X188.901 Y74.376 E0.14514 ; perimeter
M204 S1000 ; adjust acceleration
G1 X188.806 Y74.973 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X187.952 Y73.955 E0.05471 ; perimeter
G1 X190.697 Y71.652 E0.14761 ; perimeter
G1 X187.796 Y68.194 E0.18596 ; perimeter
G1 X185.051 Y70.497 E0.14761 ; perimeter
G1 X184.197 Y69.480 E0.05471 ; perimeter
G1 X186.942 Y67.177 E0.14761 ; perimeter
G1 X184.493 Y64.258 E0.15696 ; perimeter
G1 X185.608 Y63.323 E0.05995 ; perimeter
G1 X195.115 Y74.652 E0.60929 ; perimeter
G1 X194.000 Y75.588 E0.05995 ; perimeter
G1 X191.551 Y72.669 E0.15696 ; perimeter
G1 X188.852 Y74.934 E0.14514 ; perimeter
M204 S1000 ; adjust acceleration
G1 X188.845 Y74.574 F10800.000 ; move inwards before travel
G1 F8640
G1 X187.952 Y73.955 E-0.30695 ; wipe and retract
G1 X189.455 Y72.694 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.350 F10800.000 ; lift Z
G1 X144.938 Y82.368 ; move to first perimeter point
G1 Z6.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X144.938 Y82.244 E0.00510 ; perimeter
G1 X154.704 Y82.244 E0.40230 ; perimeter
G1 X163.419 Y74.931 E0.46869 ; perimeter
G1 X168.556 Y74.931 E0.21162 ; perimeter
G1 X183.224 Y62.623 E0.78883 ; perimeter
G1 X183.390 Y62.646 E0.00688 ; perimeter
G1 X168.601 Y75.055 E0.79531 ; perimeter
G1 X163.464 Y75.055 E0.21162 ; perimeter
G1 X154.749 Y82.368 E0.46869 ; perimeter
G1 X144.998 Y82.368 E0.40168 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X144.938 Y82.244 E-0.03178 ; wipe and retract
G1 X148.092 Y82.244 E-0.72822 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.350 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z6.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.081 Y77.572 E0.79275 ; perimeter
G1 X154.893 Y82.764 E0.33277 ; perimeter
G1 X144.542 Y82.764 E0.42643 ; perimeter
G1 X144.542 Y81.848 E0.03776 ; perimeter
G1 X154.559 Y81.848 E0.41268 ; perimeter
G1 X163.275 Y74.535 E0.46869 ; perimeter
G1 X168.412 Y74.535 E0.21162 ; perimeter
G1 X183.092 Y62.216 E0.78946 ; perimeter
G1 X183.497 Y62.260 E0.01679 ; perimeter
G1 X183.799 Y62.338 E0.01285 ; perimeter
G1 X183.990 Y62.407 E0.00837 ; perimeter
G1 X184.256 Y62.538 E0.01219 ; perimeter
G1 X184.570 Y62.757 E0.01578 ; perimeter
G1 X184.016 Y63.222 E0.02979 ; perimeter
G1 X183.649 Y62.946 E0.01892 ; perimeter
G1 X168.745 Y75.451 E0.80148 ; perimeter
G1 X163.608 Y75.451 E0.21162 ; perimeter
G1 X161.491 Y77.228 E0.11387 ; perimeter
G1 X164.047 Y80.274 E0.16381 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X161.032 Y78.130 E0.79275 ; perimeter
G1 X155.037 Y83.161 E0.32238 ; perimeter
G1 X144.145 Y83.161 E0.44870 ; perimeter
G1 X144.145 Y81.451 E0.07041 ; perimeter
G1 X154.415 Y81.451 E0.42307 ; perimeter
G1 X163.130 Y74.138 E0.46869 ; perimeter
G1 X168.267 Y74.138 E0.21162 ; perimeter
G1 X182.953 Y61.816 E0.78973 ; perimeter
G1 X183.236 Y61.824 E0.01169 ; perimeter
G1 X183.574 Y61.871 E0.01404 ; perimeter
G1 X183.916 Y61.959 E0.01457 ; perimeter
G1 X184.146 Y62.042 E0.01004 ; perimeter
G1 X184.455 Y62.194 E0.01419 ; perimeter
G1 X184.749 Y62.391 E0.01460 ; perimeter
G1 X184.888 Y62.507 E0.00745 ; perimeter
G1 X185.148 Y62.790 E0.01582 ; perimeter
G1 X184.029 Y63.729 E0.06017 ; perimeter
G1 X183.662 Y63.452 E0.01892 ; perimeter
G1 X168.890 Y75.848 E0.79442 ; perimeter
G1 X163.753 Y75.848 E0.21162 ; perimeter
G1 X162.049 Y77.277 E0.09160 ; perimeter
G1 X164.096 Y79.716 E0.13115 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.319 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.350 F10800.000 ; lift Z
G1 X105.062 Y82.368 ; move to first perimeter point
G1 Z6.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.251 Y82.368 E0.40415 ; perimeter
G1 X86.536 Y75.055 E0.46869 ; perimeter
G1 X81.399 Y75.055 E0.21162 ; perimeter
G1 X66.610 Y62.646 E0.79531 ; perimeter
G1 X66.776 Y62.623 E0.00688 ; perimeter
G1 X81.444 Y74.931 E0.78883 ; perimeter
M73 P34 R90
G1 X86.581 Y74.931 E0.21162 ; perimeter
G1 X95.296 Y82.244 E0.46869 ; perimeter
G1 X105.062 Y82.244 E0.40230 ; perimeter
G1 X105.062 Y82.308 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X101.771 Y82.328 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.350 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z6.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.509 Y77.228 E0.16381 ; perimeter
G1 X86.392 Y75.451 E0.11387 ; perimeter
G1 X81.255 Y75.451 E0.21162 ; perimeter
G1 X66.351 Y62.946 E0.80148 ; perimeter
G1 X65.984 Y63.222 E0.01892 ; perimeter
G1 X65.430 Y62.757 E0.02979 ; perimeter
G1 X65.744 Y62.538 E0.01578 ; perimeter
G1 X66.010 Y62.407 E0.01219 ; perimeter
G1 X66.201 Y62.338 E0.00837 ; perimeter
G1 X66.503 Y62.260 E0.01285 ; perimeter
G1 X66.907 Y62.215 E0.01675 ; perimeter
G1 X81.588 Y74.535 E0.78953 ; perimeter
G1 X86.725 Y74.535 E0.21162 ; perimeter
G1 X95.441 Y81.848 E0.46869 ; perimeter
G1 X105.458 Y81.848 E0.41268 ; perimeter
G1 X105.458 Y82.764 E0.03776 ; perimeter
G1 X95.107 Y82.764 E0.42643 ; perimeter
G1 X88.919 Y77.572 E0.33277 ; perimeter
G1 X76.588 Y92.268 E0.79028 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X87.951 Y77.277 E0.13115 ; perimeter
G1 X86.247 Y75.848 E0.09160 ; perimeter
G1 X81.110 Y75.848 E0.21162 ; perimeter
G1 X66.338 Y63.452 E0.79442 ; perimeter
G1 X65.971 Y63.729 E0.01892 ; perimeter
G1 X64.852 Y62.790 E0.06017 ; perimeter
G1 X65.112 Y62.507 E0.01582 ; perimeter
G1 X65.251 Y62.391 E0.00745 ; perimeter
G1 X65.545 Y62.194 E0.01460 ; perimeter
G1 X65.854 Y62.042 E0.01419 ; perimeter
G1 X66.084 Y61.959 E0.01004 ; perimeter
G1 X66.426 Y61.871 E0.01457 ; perimeter
G1 X66.764 Y61.824 E0.01407 ; perimeter
G1 X67.045 Y61.814 E0.01156 ; perimeter
G1 X81.733 Y74.138 E0.78986 ; perimeter
G1 X86.870 Y74.138 E0.21162 ; perimeter
G1 X95.585 Y81.451 E0.46869 ; perimeter
G1 X105.855 Y81.451 E0.42307 ; perimeter
G1 X105.855 Y83.161 E0.07041 ; perimeter
G1 X94.963 Y83.161 E0.44870 ; perimeter
G1 X88.968 Y78.130 E0.32238 ; perimeter
G1 X76.637 Y92.826 E0.79028 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.511 Y92.482 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.350 F10800.000 ; lift Z
G1 X61.145 Y74.414 ; move to first perimeter point
G1 Z6.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X58.400 Y72.111 E0.14761 ; perimeter
G1 X55.951 Y75.030 E0.15696 ; perimeter
G1 X55.444 Y74.604 E0.02729 ; perimeter
G1 X64.441 Y63.881 E0.57663 ; perimeter
G1 X64.949 Y64.307 E0.02729 ; perimeter
G1 X62.500 Y67.226 E0.15696 ; perimeter
G1 X65.245 Y69.529 E0.14761 ; perimeter
G1 X64.900 Y69.939 E0.02205 ; perimeter
G1 X62.156 Y67.636 E0.14761 ; perimeter
G1 X58.744 Y71.701 E0.21861 ; perimeter
G1 X61.489 Y74.004 E0.14761 ; perimeter
G1 X61.184 Y74.368 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X61.194 Y74.973 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X58.449 Y72.669 E0.14761 ; perimeter
G1 X56.000 Y75.588 E0.15696 ; perimeter
G1 X54.885 Y74.652 E0.05995 ; perimeter
G1 X64.392 Y63.323 E0.60929 ; perimeter
G1 X65.507 Y64.258 E0.05995 ; perimeter
G1 X63.058 Y67.177 E0.15696 ; perimeter
G1 X65.803 Y69.480 E0.14761 ; perimeter
G1 X64.949 Y70.497 E0.05471 ; perimeter
G1 X62.204 Y68.194 E0.14761 ; perimeter
G1 X59.303 Y71.652 E0.18596 ; perimeter
G1 X62.048 Y73.955 E0.14761 ; perimeter
G1 X61.233 Y74.927 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.920 Y74.681 F10800.000 ; move inwards before travel
G1 F8640
G1 X58.676 Y72.853 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.350 F10800.000 ; lift Z
G1 X115.126 Y99.392 ; move to first perimeter point
G1 Z6.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.386 Y99.392 E1.51353 ; perimeter
G1 X53.467 Y78.483 E1.34006 ; perimeter
G1 X53.461 Y78.316 E0.00688 ; perimeter
G1 X78.431 Y99.269 E1.34282 ; perimeter
G1 X115.126 Y99.269 E1.51167 ; perimeter
G1 X115.126 Y99.332 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 X115.522 Y99.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.242 Y99.789 E1.53578 ; perimeter
G1 X53.090 Y78.684 E1.35258 ; perimeter
G1 X53.063 Y78.277 E0.01679 ; perimeter
G1 X53.087 Y77.967 E0.01285 ; perimeter
G1 X53.122 Y77.766 E0.00837 ; perimeter
G1 X53.204 Y77.482 E0.01219 ; perimeter
G1 X53.399 Y77.077 E0.01853 ; perimeter
G1 X53.590 Y76.813 E0.01339 ; perimeter
G1 X54.482 Y75.750 E0.05718 ; perimeter
G1 X54.989 Y76.176 E0.02730 ; perimeter
G1 X54.232 Y77.078 E0.04851 ; perimeter
G1 X54.081 Y77.286 E0.01060 ; perimeter
G1 X53.711 Y78.009 E0.03345 ; perimeter
G1 X78.575 Y98.872 E1.33711 ; perimeter
G1 X115.522 Y98.872 E1.52207 ; perimeter
G1 X115.522 Y99.729 E0.03529 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X112.230 Y99.734 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.350 F10800.000 ; lift Z
G1 X54.208 Y77.908 ; move to first perimeter point
G1 Z6.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.719 Y98.476 E1.31817 ; perimeter
G1 X115.919 Y98.476 E1.53248 ; perimeter
G1 X115.918 Y100.185 E0.07041 ; perimeter
G1 X78.097 Y100.185 E1.55803 ; perimeter
G1 X52.720 Y78.891 E1.36473 ; perimeter
G1 X52.679 Y78.610 E0.01169 ; perimeter
G1 X52.666 Y78.270 E0.01404 ; perimeter
G1 X52.693 Y77.917 E0.01457 ; perimeter
G1 X52.735 Y77.677 E0.01004 ; perimeter
G1 X52.831 Y77.346 E0.01419 ; perimeter
G1 X52.974 Y77.022 E0.01460 ; perimeter
G1 X53.066 Y76.862 E0.00759 ; perimeter
G1 X53.277 Y76.570 E0.01486 ; perimeter
G1 X54.433 Y75.192 E0.07410 ; perimeter
G1 X55.548 Y76.127 E0.05995 ; perimeter
G1 X54.545 Y77.323 E0.06429 ; perimeter
G1 X54.419 Y77.494 E0.00876 ; perimeter
G1 X54.235 Y77.855 E0.01668 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.969 Y78.229 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.753 Y79.975 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.350 F10800.000 ; lift Z
G1 X134.589 Y137.539 ; move to first perimeter point
G1 Z6.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X134.589 Y137.415 E0.00510 ; perimeter
G1 X171.284 Y137.415 E1.51167 ; perimeter
G1 X196.254 Y116.462 E1.34282 ; perimeter
G1 X196.248 Y116.629 E0.00688 ; perimeter
G1 X171.329 Y137.539 E1.34006 ; perimeter
G1 X134.649 Y137.539 E1.51105 ; perimeter
M204 S1000 ; adjust acceleration
G1 X134.193 Y137.935 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X134.192 Y137.018 E0.03776 ; perimeter
G1 X171.140 Y137.018 E1.52207 ; perimeter
G1 X196.004 Y116.155 E1.33711 ; perimeter
G1 X195.634 Y115.432 E0.03345 ; perimeter
G1 X195.482 Y115.224 E0.01060 ; perimeter
G1 X194.725 Y114.322 E0.04851 ; perimeter
G1 X195.233 Y113.896 E0.02730 ; perimeter
G1 X196.125 Y114.960 E0.05718 ; perimeter
G1 X196.309 Y115.214 E0.01294 ; perimeter
G1 X196.509 Y115.623 E0.01877 ; perimeter
G1 X196.592 Y115.908 E0.01219 ; perimeter
G1 X196.638 Y116.198 E0.01210 ; perimeter
G1 X196.652 Y116.420 E0.00918 ; perimeter
G1 X196.625 Y116.830 E0.01694 ; perimeter
G1 X171.473 Y137.935 E1.35258 ; perimeter
G1 X134.253 Y137.935 E1.53331 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X134.192 Y137.018 E-0.21210 ; wipe and retract
G1 X136.565 Y137.018 E-0.54790 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.350 F10800.000 ; lift Z
G1 X133.796 Y136.622 ; move to first perimeter point
G1 Z6.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X170.995 Y136.622 E1.53248 ; perimeter
G1 X195.507 Y116.054 E1.31816 ; perimeter
G1 X195.296 Y115.640 E0.01915 ; perimeter
G1 X195.170 Y115.469 E0.00876 ; perimeter
G1 X194.167 Y114.273 E0.06429 ; perimeter
G1 X195.282 Y113.338 E0.05995 ; perimeter
G1 X196.438 Y114.716 E0.07410 ; perimeter
G1 X196.647 Y115.005 E0.01469 ; perimeter
G1 X196.883 Y115.490 E0.02224 ; perimeter
G1 X196.979 Y115.821 E0.01418 ; perimeter
G1 X197.032 Y116.154 E0.01387 ; perimeter
G1 X197.049 Y116.414 E0.01077 ; perimeter
G1 X197.036 Y116.756 E0.01409 ; perimeter
G1 X196.995 Y117.037 E0.01169 ; perimeter
G1 X171.618 Y138.331 E1.36473 ; perimeter
G1 X133.797 Y138.331 E1.55803 ; perimeter
G1 X133.796 Y136.682 E0.06794 ; perimeter
M204 S1000 ; adjust acceleration
G1 X134.196 Y136.628 F10800.000 ; move inwards before travel
G1 F8640
G1 X137.087 Y136.677 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.350 F10800.000 ; lift Z
G1 X188.570 Y112.560 ; move to first perimeter point
G1 Z6.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X188.225 Y112.150 E0.02205 ; perimeter
G1 X190.970 Y109.847 E0.14761 ; perimeter
G1 X187.559 Y105.782 E0.21861 ; perimeter
G1 X184.814 Y108.085 E0.14761 ; perimeter
G1 X184.470 Y107.675 E0.02205 ; perimeter
G1 X187.215 Y105.372 E0.14761 ; perimeter
G1 X184.766 Y102.453 E0.15696 ; perimeter
G1 X185.274 Y102.027 E0.02730 ; perimeter
G1 X194.271 Y112.750 E0.57663 ; perimeter
G1 X193.763 Y113.176 E0.02729 ; perimeter
G1 X191.314 Y110.257 E0.15696 ; perimeter
G1 X188.615 Y112.522 E0.14514 ; perimeter
M204 S1000 ; adjust acceleration
G1 X188.521 Y113.119 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X187.667 Y112.101 E0.05471 ; perimeter
G1 X190.412 Y109.798 E0.14761 ; perimeter
M73 Q34 S91
G1 X187.510 Y106.340 E0.18596 ; perimeter
G1 X184.765 Y108.643 E0.14761 ; perimeter
G1 X183.912 Y107.626 E0.05471 ; perimeter
G1 X186.657 Y105.323 E0.14761 ; perimeter
G1 X184.208 Y102.404 E0.15696 ; perimeter
G1 X185.323 Y101.469 E0.05995 ; perimeter
G1 X194.829 Y112.799 E0.60929 ; perimeter
G1 X193.715 Y113.734 E0.05995 ; perimeter
G1 X191.266 Y110.815 E0.15696 ; perimeter
G1 X188.567 Y113.080 E0.14514 ; perimeter
M204 S1000 ; adjust acceleration
G1 X188.560 Y112.721 F10800.000 ; move inwards before travel
G1 F8640
G1 X187.667 Y112.101 E-0.30695 ; wipe and retract
G1 X189.170 Y110.840 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.350 F10800.000 ; lift Z
G1 X144.653 Y120.514 ; move to first perimeter point
G1 Z6.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X144.653 Y120.390 E0.00510 ; perimeter
G1 X154.418 Y120.390 E0.40230 ; perimeter
G1 X163.134 Y113.077 E0.46869 ; perimeter
G1 X168.271 Y113.077 E0.21162 ; perimeter
G1 X182.939 Y100.769 E0.78883 ; perimeter
G1 X183.105 Y100.792 E0.00688 ; perimeter
G1 X168.316 Y113.201 E0.79531 ; perimeter
G1 X163.179 Y113.201 E0.21162 ; perimeter
G1 X154.463 Y120.514 E0.46869 ; perimeter
G1 X144.713 Y120.514 E0.40168 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X144.653 Y120.390 E-0.03178 ; wipe and retract
G1 X147.807 Y120.390 E-0.72822 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.350 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z6.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.796 Y115.718 E0.79275 ; perimeter
G1 X154.608 Y120.910 E0.33277 ; perimeter
G1 X144.257 Y120.910 E0.42643 ; perimeter
G1 X144.257 Y119.994 E0.03776 ; perimeter
G1 X154.274 Y119.994 E0.41268 ; perimeter
G1 X162.990 Y112.681 E0.46869 ; perimeter
G1 X168.127 Y112.681 E0.21162 ; perimeter
G1 X182.807 Y100.363 E0.78946 ; perimeter
G1 X183.212 Y100.406 E0.01679 ; perimeter
G1 X183.514 Y100.484 E0.01285 ; perimeter
G1 X183.705 Y100.553 E0.00837 ; perimeter
G1 X183.971 Y100.684 E0.01219 ; perimeter
G1 X184.284 Y100.904 E0.01578 ; perimeter
G1 X183.730 Y101.368 E0.02979 ; perimeter
G1 X183.364 Y101.092 E0.01892 ; perimeter
G1 X168.460 Y113.597 E0.80148 ; perimeter
G1 X163.323 Y113.597 E0.21162 ; perimeter
G1 X161.206 Y115.374 E0.11387 ; perimeter
G1 X163.762 Y118.420 E0.16381 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.747 Y116.277 E0.79275 ; perimeter
G1 X154.752 Y121.307 E0.32238 ; perimeter
G1 X143.860 Y121.307 E0.44870 ; perimeter
G1 X143.860 Y119.598 E0.07041 ; perimeter
G1 X154.130 Y119.598 E0.42307 ; perimeter
G1 X162.845 Y112.284 E0.46869 ; perimeter
G1 X167.982 Y112.284 E0.21162 ; perimeter
G1 X182.667 Y99.962 E0.78973 ; perimeter
G1 X182.951 Y99.970 E0.01169 ; perimeter
G1 X183.289 Y100.017 E0.01404 ; perimeter
G1 X183.631 Y100.105 E0.01457 ; perimeter
G1 X183.860 Y100.188 E0.01004 ; perimeter
G1 X184.170 Y100.340 E0.01419 ; perimeter
G1 X184.464 Y100.537 E0.01460 ; perimeter
G1 X184.603 Y100.653 E0.00745 ; perimeter
G1 X184.862 Y100.936 E0.01582 ; perimeter
G1 X183.743 Y101.875 E0.06017 ; perimeter
G1 X183.377 Y101.598 E0.01892 ; perimeter
G1 X168.604 Y113.994 E0.79442 ; perimeter
G1 X163.467 Y113.994 E0.21162 ; perimeter
G1 X161.764 Y115.423 E0.09160 ; perimeter
G1 X163.810 Y117.862 E0.13115 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.350 F10800.000 ; lift Z
G1 X104.777 Y120.514 ; move to first perimeter point
G1 Z6.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X94.966 Y120.514 E0.40415 ; perimeter
G1 X86.251 Y113.201 E0.46869 ; perimeter
G1 X81.114 Y113.201 E0.21162 ; perimeter
G1 X66.325 Y100.792 E0.79531 ; perimeter
G1 X66.490 Y100.769 E0.00688 ; perimeter
G1 X81.159 Y113.077 E0.78883 ; perimeter
G1 X86.296 Y113.077 E0.21162 ; perimeter
G1 X95.011 Y120.390 E0.46869 ; perimeter
G1 X104.777 Y120.390 E0.40230 ; perimeter
G1 X104.777 Y120.454 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X101.485 Y120.474 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.350 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z6.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.224 Y115.374 E0.16381 ; perimeter
G1 X86.107 Y113.597 E0.11387 ; perimeter
G1 X80.970 Y113.597 E0.21162 ; perimeter
G1 X66.066 Y101.092 E0.80148 ; perimeter
G1 X65.699 Y101.368 E0.01892 ; perimeter
G1 X65.145 Y100.904 E0.02979 ; perimeter
G1 X65.459 Y100.684 E0.01578 ; perimeter
G1 X65.725 Y100.553 E0.01219 ; perimeter
G1 X65.916 Y100.484 E0.00837 ; perimeter
G1 X66.218 Y100.406 E0.01285 ; perimeter
G1 X66.622 Y100.362 E0.01675 ; perimeter
G1 X81.303 Y112.681 E0.78953 ; perimeter
G1 X86.440 Y112.681 E0.21162 ; perimeter
G1 X95.155 Y119.994 E0.46869 ; perimeter
G1 X105.173 Y119.994 E0.41268 ; perimeter
G1 X105.173 Y120.910 E0.03776 ; perimeter
G1 X94.822 Y120.910 E0.42643 ; perimeter
G1 X88.634 Y115.718 E0.33277 ; perimeter
G1 X76.303 Y130.414 E0.79028 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X87.666 Y115.423 E0.13115 ; perimeter
G1 X85.962 Y113.994 E0.09160 ; perimeter
G1 X80.825 Y113.994 E0.21162 ; perimeter
G1 X66.053 Y101.598 E0.79442 ; perimeter
G1 X65.686 Y101.875 E0.01892 ; perimeter
G1 X64.567 Y100.936 E0.06017 ; perimeter
G1 X64.827 Y100.653 E0.01582 ; perimeter
G1 X64.966 Y100.537 E0.00745 ; perimeter
G1 X65.260 Y100.340 E0.01460 ; perimeter
G1 X65.569 Y100.188 E0.01419 ; perimeter
G1 X65.798 Y100.105 E0.01004 ; perimeter
G1 X66.141 Y100.017 E0.01457 ; perimeter
G1 X66.479 Y99.970 E0.01407 ; perimeter
G1 X66.760 Y99.960 E0.01156 ; perimeter
G1 X81.447 Y112.284 E0.78986 ; perimeter
G1 X86.584 Y112.284 E0.21162 ; perimeter
G1 X95.300 Y119.598 E0.46869 ; perimeter
G1 X105.569 Y119.598 E0.42307 ; perimeter
G1 X105.569 Y121.307 E0.07041 ; perimeter
G1 X94.678 Y121.307 E0.44870 ; perimeter
G1 X88.683 Y116.277 E0.32238 ; perimeter
G1 X76.352 Y130.972 E0.79028 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.226 Y130.628 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.350 F10800.000 ; lift Z
G1 X60.860 Y112.560 ; move to first perimeter point
G1 Z6.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X58.115 Y110.257 E0.14761 ; perimeter
G1 X55.666 Y113.176 E0.15696 ; perimeter
G1 X55.159 Y112.750 E0.02729 ; perimeter
G1 X64.156 Y102.027 E0.57663 ; perimeter
G1 X64.663 Y102.453 E0.02729 ; perimeter
G1 X62.214 Y105.372 E0.15696 ; perimeter
G1 X64.959 Y107.675 E0.14761 ; perimeter
G1 X64.615 Y108.085 E0.02205 ; perimeter
G1 X61.870 Y105.782 E0.14761 ; perimeter
G1 X58.459 Y109.847 E0.21861 ; perimeter
G1 X61.204 Y112.150 E0.14761 ; perimeter
G1 X60.899 Y112.514 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.909 Y113.119 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X58.164 Y110.815 E0.14761 ; perimeter
G1 X55.715 Y113.734 E0.15696 ; perimeter
G1 X54.600 Y112.799 E0.05995 ; perimeter
G1 X64.107 Y101.469 E0.60929 ; perimeter
G1 X65.222 Y102.404 E0.05995 ; perimeter
G1 X62.773 Y105.323 E0.15696 ; perimeter
G1 X65.518 Y107.626 E0.14761 ; perimeter
G1 X64.664 Y108.643 E0.05471 ; perimeter
G1 X61.919 Y106.340 E0.14761 ; perimeter
G1 X59.018 Y109.798 E0.18596 ; perimeter
G1 X61.763 Y112.101 E0.14761 ; perimeter
G1 X60.948 Y113.073 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.635 Y112.827 F10800.000 ; move inwards before travel
G1 F8640
G1 X58.391 Y111.000 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.350 F10800.000 ; lift Z
G1 X114.840 Y137.539 ; move to first perimeter point
G1 Z6.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.101 Y137.539 E1.51353 ; perimeter
G1 X53.182 Y116.629 E1.34006 ; perimeter
G1 X53.176 Y116.462 E0.00688 ; perimeter
G1 X78.146 Y137.415 E1.34282 ; perimeter
G1 X114.841 Y137.415 E1.51167 ; perimeter
G1 X114.840 Y137.479 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 X115.236 Y137.935 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X77.956 Y137.935 E1.53578 ; perimeter
G1 X52.805 Y116.830 E1.35258 ; perimeter
M73 P34 R89
G1 X52.778 Y116.424 E0.01679 ; perimeter
G1 X52.802 Y116.113 E0.01285 ; perimeter
G1 X52.837 Y115.913 E0.00837 ; perimeter
G1 X52.919 Y115.628 E0.01219 ; perimeter
G1 X53.114 Y115.223 E0.01853 ; perimeter
G1 X53.304 Y114.960 E0.01339 ; perimeter
G1 X54.197 Y113.896 E0.05718 ; perimeter
G1 X54.704 Y114.322 E0.02730 ; perimeter
G1 X53.947 Y115.224 E0.04851 ; perimeter
G1 X53.795 Y115.432 E0.01060 ; perimeter
G1 X53.426 Y116.155 E0.03345 ; perimeter
G1 X78.290 Y137.018 E1.33711 ; perimeter
G1 X115.237 Y137.018 E1.52207 ; perimeter
G1 X115.236 Y137.875 E0.03529 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X111.945 Y137.880 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.350 F10800.000 ; lift Z
G1 X53.923 Y116.054 ; move to first perimeter point
G1 Z6.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.434 Y136.622 E1.31817 ; perimeter
G1 X115.634 Y136.622 E1.53248 ; perimeter
G1 X115.632 Y138.331 E0.07041 ; perimeter
G1 X77.812 Y138.331 E1.55803 ; perimeter
G1 X52.435 Y117.037 E1.36473 ; perimeter
G1 X52.393 Y116.756 E0.01169 ; perimeter
G1 X52.381 Y116.416 E0.01404 ; perimeter
G1 X52.408 Y116.063 E0.01457 ; perimeter
G1 X52.450 Y115.823 E0.01004 ; perimeter
G1 X52.546 Y115.492 E0.01419 ; perimeter
G1 X52.689 Y115.168 E0.01460 ; perimeter
G1 X52.780 Y115.008 E0.00759 ; perimeter
G1 X52.991 Y114.716 E0.01486 ; perimeter
G1 X54.148 Y113.338 E0.07410 ; perimeter
G1 X55.263 Y114.273 E0.05995 ; perimeter
G1 X54.259 Y115.469 E0.06429 ; perimeter
G1 X54.134 Y115.640 E0.00876 ; perimeter
G1 X53.950 Y116.001 E0.01668 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.684 Y116.375 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;7


G1 F8640
G1 X56.467 Y118.121 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;7
G1 X114.118 Y99.567 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.322 Y99.567 E1.47465 ; perimeter
G1 X53.362 Y78.624 E1.34228 ; perimeter
G1 X53.337 Y78.440 E0.00762 ; perimeter
G1 X78.367 Y99.444 E1.34607 ; perimeter
G1 X114.118 Y99.444 E1.47280 ; perimeter
G1 X114.118 Y99.507 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 X114.514 Y99.964 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.178 Y99.964 E1.49690 ; perimeter
G1 X53.001 Y78.838 E1.35392 ; perimeter
G1 X52.940 Y78.468 E0.01546 ; perimeter
G1 X52.929 Y78.163 E0.01258 ; perimeter
G1 X52.987 Y77.658 E0.02092 ; perimeter
G1 X53.072 Y77.363 E0.01265 ; perimeter
G1 X53.270 Y76.959 E0.01856 ; perimeter
G1 X53.456 Y76.701 E0.01310 ; perimeter
G1 X54.348 Y75.638 E0.05717 ; perimeter
G1 X54.855 Y76.064 E0.02729 ; perimeter
G1 X54.088 Y76.978 E0.04917 ; perimeter
G1 X53.841 Y77.356 E0.01861 ; perimeter
G1 X53.559 Y78.110 E0.03316 ; perimeter
G1 X78.511 Y99.047 E1.34186 ; perimeter
G1 X114.515 Y99.047 E1.48321 ; perimeter
G1 X114.514 Y99.904 E0.03529 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X111.223 Y99.909 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.600 F10800.000 ; lift Z
G1 X54.028 Y77.986 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.656 Y98.651 E1.32439 ; perimeter
G1 X114.912 Y98.651 E1.49362 ; perimeter
G1 X114.910 Y100.360 E0.07041 ; perimeter
G1 X78.034 Y100.360 E1.51914 ; perimeter
G1 X52.646 Y79.057 E1.36529 ; perimeter
G1 X52.588 Y78.811 E0.01041 ; perimeter
G1 X52.545 Y78.503 E0.01282 ; perimeter
G1 X52.532 Y78.155 E0.01436 ; perimeter
G1 X52.560 Y77.796 E0.01483 ; perimeter
G1 X52.600 Y77.569 E0.00948 ; perimeter
G1 X52.698 Y77.231 E0.01450 ; perimeter
G1 X52.931 Y76.750 E0.02201 ; perimeter
G1 X53.143 Y76.457 E0.01488 ; perimeter
G1 X54.299 Y75.079 E0.07410 ; perimeter
G1 X55.414 Y76.015 E0.05995 ; perimeter
G1 X54.407 Y77.215 E0.06453 ; perimeter
G1 X54.196 Y77.536 E0.01582 ; perimeter
G1 X54.049 Y77.930 E0.01733 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.797 Y78.312 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.567 Y80.050 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.600 F10800.000 ; lift Z
G1 X61.006 Y74.297 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X58.266 Y71.998 E0.14734 ; perimeter
G1 X55.817 Y74.917 E0.15696 ; perimeter
G1 X55.310 Y74.491 E0.02729 ; perimeter
G1 X64.307 Y63.769 E0.57663 ; perimeter
G1 X64.815 Y64.194 E0.02729 ; perimeter
G1 X62.366 Y67.113 E0.15696 ; perimeter
G1 X65.105 Y69.412 E0.14734 ; perimeter
G1 X64.761 Y69.822 E0.02205 ; perimeter
G1 X62.021 Y67.523 E0.14734 ; perimeter
G1 X58.610 Y71.588 E0.21861 ; perimeter
G1 X61.350 Y73.887 E0.14734 ; perimeter
G1 X61.045 Y74.251 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X61.055 Y74.856 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X58.315 Y72.557 E0.14734 ; perimeter
G1 X55.866 Y75.475 E0.15696 ; perimeter
G1 X54.751 Y74.540 E0.05995 ; perimeter
G1 X64.258 Y63.210 E0.60929 ; perimeter
G1 X65.373 Y64.146 E0.05995 ; perimeter
G1 X62.924 Y67.064 E0.15696 ; perimeter
G1 X65.664 Y69.363 E0.14734 ; perimeter
G1 X64.810 Y70.381 E0.05471 ; perimeter
G1 X62.070 Y68.082 E0.14734 ; perimeter
G1 X59.169 Y71.539 E0.18596 ; perimeter
G1 X61.909 Y73.838 E0.14734 ; perimeter
G1 X61.094 Y74.810 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.781 Y74.564 F10800.000 ; move inwards before travel
G1 F8640
G1 X58.537 Y72.737 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.600 F10800.000 ; lift Z
G1 X104.812 Y82.193 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.315 Y82.193 E0.39123 ; perimeter
G1 X86.600 Y74.880 E0.46869 ; perimeter
G1 X81.463 Y74.880 E0.21162 ; perimeter
G1 X66.711 Y62.502 E0.79330 ; perimeter
G1 X66.897 Y62.496 E0.00765 ; perimeter
G1 X81.508 Y74.756 E0.78574 ; perimeter
G1 X86.645 Y74.756 E0.21162 ; perimeter
G1 X95.360 Y82.069 E0.46869 ; perimeter
G1 X104.812 Y82.069 E0.38937 ; perimeter
G1 X104.812 Y82.133 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X101.521 Y82.154 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.600 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.622 Y77.094 E0.17102 ; perimeter
G1 X86.455 Y75.276 E0.11650 ; perimeter
G1 X81.318 Y75.276 E0.21162 ; perimeter
G1 X66.424 Y62.778 E0.80099 ; perimeter
G1 X65.854 Y63.113 E0.02722 ; perimeter
G1 X65.296 Y62.645 E0.03002 ; perimeter
G1 X65.609 Y62.426 E0.01574 ; perimeter
G1 X65.880 Y62.293 E0.01242 ; perimeter
G1 X66.059 Y62.228 E0.00784 ; perimeter
G1 X66.367 Y62.148 E0.01310 ; perimeter
G1 X66.668 Y62.107 E0.01254 ; perimeter
G1 X67.043 Y62.101 E0.01547 ; perimeter
G1 X81.652 Y74.360 E0.78561 ; perimeter
G1 X86.789 Y74.360 E0.21162 ; perimeter
G1 X95.504 Y81.673 E0.46869 ; perimeter
G1 X105.208 Y81.673 E0.39976 ; perimeter
G1 X105.208 Y82.589 E0.03776 ; perimeter
G1 X95.171 Y82.589 E0.41350 ; perimeter
G1 X89.032 Y77.438 E0.33014 ; perimeter
G1 X76.588 Y92.268 E0.79749 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X88.063 Y77.143 E0.13836 ; perimeter
G1 X86.311 Y75.673 E0.09422 ; perimeter
G1 X81.174 Y75.673 E0.21162 ; perimeter
G1 X66.384 Y63.262 E0.79540 ; perimeter
G1 X65.969 Y63.506 E0.01980 ; perimeter
G1 X65.845 Y63.623 E0.00704 ; perimeter
G1 X64.719 Y62.677 E0.06057 ; perimeter
G1 X64.981 Y62.391 E0.01602 ; perimeter
G1 X65.112 Y62.282 E0.00700 ; perimeter
G1 X65.410 Y62.082 E0.01480 ; perimeter
G1 X65.725 Y61.928 E0.01442 ; perimeter
G1 X65.941 Y61.849 E0.00948 ; perimeter
G1 X66.289 Y61.759 E0.01483 ; perimeter
G1 X66.634 Y61.711 E0.01434 ; perimeter
G1 X66.973 Y61.700 E0.01395 ; perimeter
G1 X67.198 Y61.714 E0.00928 ; perimeter
G1 X81.796 Y73.963 E0.78506 ; perimeter
G1 X86.933 Y73.963 E0.21162 ; perimeter
G1 X95.649 Y81.276 E0.46869 ; perimeter
G1 X105.605 Y81.276 E0.41014 ; perimeter
G1 X105.605 Y82.986 E0.07041 ; perimeter
G1 X95.027 Y82.986 E0.43577 ; perimeter
G1 X89.081 Y77.996 E0.31976 ; perimeter
G1 X76.637 Y92.826 E0.79749 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.510 Y92.482 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.600 F10800.000 ; lift Z
G1 X145.188 Y82.193 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X145.188 Y82.069 E0.00510 ; perimeter
G1 X154.640 Y82.069 E0.38937 ; perimeter
G1 X163.355 Y74.756 E0.46869 ; perimeter
G1 X168.492 Y74.756 E0.21162 ; perimeter
G1 X183.104 Y62.495 E0.78580 ; perimeter
G1 X183.289 Y62.502 E0.00762 ; perimeter
G1 X168.537 Y74.880 E0.79331 ; perimeter
G1 X163.400 Y74.880 E0.21162 ; perimeter
G1 X154.685 Y82.193 E0.46869 ; perimeter
G1 X145.248 Y82.193 E0.38876 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X145.188 Y82.069 E-0.03178 ; wipe and retract
G1 X148.342 Y82.069 E-0.72822 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.600 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q34 S90
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.968 Y77.438 E0.79997 ; perimeter
G1 X154.829 Y82.589 E0.33014 ; perimeter
G1 X144.792 Y82.589 E0.41350 ; perimeter
G1 X144.792 Y81.673 E0.03776 ; perimeter
G1 X154.496 Y81.673 E0.39976 ; perimeter
G1 X163.211 Y74.360 E0.46869 ; perimeter
G1 X168.348 Y74.360 E0.21162 ; perimeter
G1 X182.956 Y62.102 E0.78556 ; perimeter
G1 X183.331 Y62.107 E0.01546 ; perimeter
G1 X183.633 Y62.148 E0.01258 ; perimeter
G1 X183.941 Y62.228 E0.01310 ; perimeter
G1 X184.120 Y62.293 E0.00784 ; perimeter
G1 X184.391 Y62.426 E0.01242 ; perimeter
G1 X184.704 Y62.645 E0.01574 ; perimeter
G1 X184.146 Y63.113 E0.03002 ; perimeter
G1 X183.576 Y62.778 E0.02722 ; perimeter
G1 X168.682 Y75.276 E0.80099 ; perimeter
G1 X163.545 Y75.276 E0.21162 ; perimeter
G1 X161.378 Y77.094 E0.11650 ; perimeter
G1 X164.047 Y80.274 E0.17102 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.919 Y77.996 E0.79997 ; perimeter
G1 X154.973 Y82.986 E0.31976 ; perimeter
G1 X144.395 Y82.986 E0.43577 ; perimeter
G1 X144.395 Y81.276 E0.07041 ; perimeter
G1 X154.351 Y81.276 E0.41014 ; perimeter
G1 X163.067 Y73.963 E0.46869 ; perimeter
G1 X168.204 Y73.963 E0.21162 ; perimeter
G1 X182.802 Y61.714 E0.78504 ; perimeter
G1 X183.054 Y61.700 E0.01041 ; perimeter
G1 X183.365 Y61.711 E0.01282 ; perimeter
G1 X183.711 Y61.759 E0.01436 ; perimeter
G1 X184.059 Y61.849 E0.01483 ; perimeter
G1 X184.275 Y61.928 E0.00948 ; perimeter
G1 X184.590 Y62.082 E0.01442 ; perimeter
G1 X184.888 Y62.282 E0.01480 ; perimeter
G1 X185.019 Y62.391 E0.00700 ; perimeter
G1 X185.281 Y62.677 E0.01602 ; perimeter
G1 X184.155 Y63.623 E0.06057 ; perimeter
G1 X184.031 Y63.506 E0.00704 ; perimeter
G1 X183.616 Y63.262 E0.01980 ; perimeter
G1 X168.826 Y75.673 E0.79540 ; perimeter
G1 X163.689 Y75.673 E0.21162 ; perimeter
G1 X161.937 Y77.143 E0.09422 ; perimeter
G1 X164.096 Y79.716 E0.13836 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.319 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.600 F10800.000 ; lift Z
G1 X188.994 Y74.297 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X188.650 Y73.887 E0.02205 ; perimeter
G1 X191.390 Y71.588 E0.14734 ; perimeter
G1 X187.979 Y67.523 E0.21861 ; perimeter
G1 X185.239 Y69.822 E0.14734 ; perimeter
G1 X184.895 Y69.412 E0.02205 ; perimeter
G1 X187.634 Y67.113 E0.14734 ; perimeter
G1 X185.185 Y64.194 E0.15696 ; perimeter
G1 X185.693 Y63.769 E0.02730 ; perimeter
G1 X194.690 Y74.491 E0.57663 ; perimeter
G1 X194.183 Y74.917 E0.02729 ; perimeter
G1 X191.734 Y71.998 E0.15696 ; perimeter
G1 X189.040 Y74.259 E0.14487 ; perimeter
M204 S1000 ; adjust acceleration
G1 X188.945 Y74.856 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X188.091 Y73.838 E0.05471 ; perimeter
G1 X190.831 Y71.539 E0.14734 ; perimeter
G1 X187.930 Y68.082 E0.18596 ; perimeter
G1 X185.190 Y70.381 E0.14734 ; perimeter
G1 X184.336 Y69.363 E0.05471 ; perimeter
G1 X187.076 Y67.064 E0.14734 ; perimeter
G1 X184.627 Y64.146 E0.15696 ; perimeter
G1 X185.742 Y63.210 E0.05995 ; perimeter
G1 X195.249 Y74.540 E0.60929 ; perimeter
G1 X194.134 Y75.475 E0.05995 ; perimeter
G1 X191.685 Y72.557 E0.15696 ; perimeter
G1 X188.991 Y74.817 E0.14487 ; perimeter
M204 S1000 ; adjust acceleration
G1 X188.984 Y74.458 F10800.000 ; move inwards before travel
G1 F8640
G1 X188.091 Y73.838 E-0.30695 ; wipe and retract
G1 X189.594 Y72.577 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.600 F10800.000 ; lift Z
G1 X135.882 Y99.567 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X135.882 Y99.444 E0.00510 ; perimeter
G1 X171.633 Y99.444 E1.47280 ; perimeter
G1 X196.663 Y78.440 E1.34608 ; perimeter
G1 X196.638 Y78.624 E0.00762 ; perimeter
G1 X171.678 Y99.567 E1.34228 ; perimeter
G1 X135.942 Y99.567 E1.47218 ; perimeter
M204 S1000 ; adjust acceleration
G1 X135.486 Y99.964 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X135.485 Y99.047 E0.03776 ; perimeter
G1 X171.489 Y99.047 E1.48321 ; perimeter
G1 X196.441 Y78.110 E1.34186 ; perimeter
G1 X196.159 Y77.356 E0.03316 ; perimeter
G1 X195.912 Y76.978 E0.01861 ; perimeter
G1 X195.145 Y76.064 E0.04917 ; perimeter
G1 X195.652 Y75.638 E0.02729 ; perimeter
G1 X196.544 Y76.701 E0.05717 ; perimeter
G1 X196.737 Y76.968 E0.01359 ; perimeter
G1 X196.930 Y77.369 E0.01830 ; perimeter
G1 X197.013 Y77.658 E0.01242 ; perimeter
G1 X197.071 Y78.163 E0.02092 ; perimeter
G1 X197.060 Y78.468 E0.01258 ; perimeter
G1 X196.999 Y78.838 E0.01546 ; perimeter
G1 X171.822 Y99.964 E1.35392 ; perimeter
G1 X135.546 Y99.964 E1.49443 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X135.485 Y99.047 E-0.21211 ; wipe and retract
G1 X137.857 Y99.047 E-0.54789 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.600 F10800.000 ; lift Z
G1 X135.088 Y98.651 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.344 Y98.651 E1.49362 ; perimeter
G1 X195.972 Y77.986 E1.32439 ; perimeter
G1 X195.804 Y77.536 E0.01980 ; perimeter
G1 X195.593 Y77.215 E0.01582 ; perimeter
G1 X194.586 Y76.015 E0.06453 ; perimeter
G1 X195.701 Y75.079 E0.05995 ; perimeter
G1 X196.857 Y76.457 E0.07410 ; perimeter
G1 X197.071 Y76.754 E0.01506 ; perimeter
G1 X197.303 Y77.233 E0.02192 ; perimeter
G1 X197.400 Y77.569 E0.01442 ; perimeter
G1 X197.440 Y77.796 E0.00948 ; perimeter
G1 X197.468 Y78.155 E0.01483 ; perimeter
G1 X197.455 Y78.503 E0.01436 ; perimeter
G1 X197.412 Y78.811 E0.01282 ; perimeter
G1 X197.354 Y79.057 E0.01041 ; perimeter
G1 X171.966 Y100.360 E1.36529 ; perimeter
G1 X135.090 Y100.360 E1.51914 ; perimeter
G1 X135.088 Y98.711 E0.06794 ; perimeter
M204 S1000 ; adjust acceleration
G1 X135.488 Y98.657 F10800.000 ; move inwards before travel
G1 F8640
G1 X138.379 Y98.705 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.600 F10800.000 ; lift Z
G1 X113.833 Y137.714 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.037 Y137.714 E1.47465 ; perimeter
G1 X53.077 Y116.770 E1.34228 ; perimeter
G1 X53.051 Y116.587 E0.00762 ; perimeter
G1 X78.082 Y137.590 E1.34607 ; perimeter
G1 X113.833 Y137.590 E1.47280 ; perimeter
G1 X113.833 Y137.654 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 X114.229 Y138.110 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X77.893 Y138.110 E1.49690 ; perimeter
G1 X52.716 Y116.984 E1.35392 ; perimeter
G1 X52.655 Y116.614 E0.01546 ; perimeter
G1 X52.644 Y116.309 E0.01258 ; perimeter
G1 X52.702 Y115.805 E0.02092 ; perimeter
G1 X52.787 Y115.510 E0.01265 ; perimeter
G1 X52.985 Y115.105 E0.01856 ; perimeter
G1 X53.170 Y114.847 E0.01310 ; perimeter
G1 X54.062 Y113.784 E0.05717 ; perimeter
G1 X54.570 Y114.210 E0.02729 ; perimeter
G1 X53.803 Y115.124 E0.04917 ; perimeter
G1 X53.555 Y115.502 E0.01861 ; perimeter
G1 X53.274 Y116.256 E0.03316 ; perimeter
G1 X78.226 Y137.193 E1.34186 ; perimeter
G1 X114.230 Y137.193 E1.48321 ; perimeter
G1 X114.229 Y138.050 E0.03529 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X110.937 Y138.055 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.600 F10800.000 ; lift Z
G1 X53.743 Y116.132 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.370 Y136.797 E1.32439 ; perimeter
G1 X114.627 Y136.797 E1.49362 ; perimeter
G1 X114.625 Y138.506 E0.07041 ; perimeter
G1 X77.748 Y138.506 E1.51914 ; perimeter
G1 X52.360 Y117.203 E1.36529 ; perimeter
G1 X52.303 Y116.957 E0.01041 ; perimeter
G1 X52.260 Y116.649 E0.01282 ; perimeter
G1 X52.247 Y116.301 E0.01436 ; perimeter
G1 X52.275 Y115.942 E0.01483 ; perimeter
G1 X52.315 Y115.715 E0.00948 ; perimeter
G1 X52.412 Y115.377 E0.01450 ; perimeter
G1 X52.646 Y114.896 E0.02201 ; perimeter
G1 X52.857 Y114.603 E0.01488 ; perimeter
G1 X54.014 Y113.225 E0.07410 ; perimeter
G1 X55.128 Y114.161 E0.05995 ; perimeter
G1 X54.122 Y115.361 E0.06453 ; perimeter
G1 X53.911 Y115.682 E0.01582 ; perimeter
G1 X53.764 Y116.076 E0.01733 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.512 Y116.458 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.282 Y118.196 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.600 F10800.000 ; lift Z
G1 X60.721 Y112.444 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.981 Y110.145 E0.14734 ; perimeter
G1 X55.532 Y113.063 E0.15696 ; perimeter
G1 X55.025 Y112.637 E0.02729 ; perimeter
G1 X64.022 Y101.915 E0.57663 ; perimeter
G1 X64.529 Y102.341 E0.02729 ; perimeter
G1 X62.080 Y105.259 E0.15696 ; perimeter
G1 X64.820 Y107.558 E0.14734 ; perimeter
G1 X64.476 Y107.968 E0.02205 ; perimeter
G1 X61.736 Y105.669 E0.14734 ; perimeter
G1 X58.325 Y109.734 E0.21861 ; perimeter
G1 X61.065 Y112.033 E0.14734 ; perimeter
G1 X60.760 Y112.398 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.770 Y113.002 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X58.030 Y110.703 E0.14734 ; perimeter
G1 X55.581 Y113.622 E0.15696 ; perimeter
G1 X54.466 Y112.686 E0.05995 ; perimeter
M73 P35 R88
G1 X63.973 Y101.356 E0.60929 ; perimeter
G1 X65.088 Y102.292 E0.05995 ; perimeter
G1 X62.639 Y105.210 E0.15696 ; perimeter
G1 X65.379 Y107.509 E0.14734 ; perimeter
G1 X64.525 Y108.527 E0.05471 ; perimeter
G1 X61.785 Y106.228 E0.14734 ; perimeter
G1 X58.884 Y109.686 E0.18596 ; perimeter
G1 X61.623 Y111.985 E0.14734 ; perimeter
G1 X60.808 Y112.956 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.496 Y112.710 F10800.000 ; move inwards before travel
G1 F8640
G1 X58.252 Y110.883 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.600 F10800.000 ; lift Z
G1 X104.527 Y120.339 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.030 Y120.339 E0.39123 ; perimeter
G1 X86.314 Y113.026 E0.46869 ; perimeter
G1 X81.177 Y113.026 E0.21162 ; perimeter
G1 X66.426 Y100.648 E0.79330 ; perimeter
G1 X66.611 Y100.642 E0.00765 ; perimeter
G1 X81.223 Y112.902 E0.78574 ; perimeter
G1 X86.360 Y112.902 E0.21162 ; perimeter
G1 X95.075 Y120.215 E0.46869 ; perimeter
G1 X104.527 Y120.215 E0.38937 ; perimeter
G1 X104.527 Y120.279 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X101.235 Y120.300 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.600 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.336 Y115.240 E0.17102 ; perimeter
G1 X86.170 Y113.422 E0.11650 ; perimeter
G1 X81.033 Y113.422 E0.21162 ; perimeter
G1 X66.139 Y100.924 E0.80099 ; perimeter
G1 X65.569 Y101.259 E0.02722 ; perimeter
G1 X65.011 Y100.791 E0.03002 ; perimeter
G1 X65.324 Y100.572 E0.01574 ; perimeter
G1 X65.595 Y100.439 E0.01242 ; perimeter
G1 X65.774 Y100.374 E0.00784 ; perimeter
G1 X66.081 Y100.294 E0.01310 ; perimeter
G1 X66.383 Y100.253 E0.01254 ; perimeter
G1 X66.758 Y100.248 E0.01547 ; perimeter
G1 X81.367 Y112.506 E0.78561 ; perimeter
G1 X86.504 Y112.506 E0.21162 ; perimeter
G1 X95.219 Y119.819 E0.46869 ; perimeter
G1 X104.923 Y119.819 E0.39976 ; perimeter
G1 X104.923 Y120.735 E0.03776 ; perimeter
G1 X94.886 Y120.735 E0.41350 ; perimeter
G1 X88.747 Y115.584 E0.33014 ; perimeter
G1 X76.303 Y130.414 E0.79749 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X87.778 Y115.289 E0.13836 ; perimeter
G1 X86.026 Y113.819 E0.09422 ; perimeter
G1 X80.889 Y113.819 E0.21162 ; perimeter
G1 X66.098 Y101.408 E0.79540 ; perimeter
G1 X65.684 Y101.652 E0.01980 ; perimeter
G1 X65.560 Y101.769 E0.00704 ; perimeter
G1 X64.433 Y100.824 E0.06057 ; perimeter
G1 X64.696 Y100.537 E0.01602 ; perimeter
G1 X64.827 Y100.429 E0.00700 ; perimeter
G1 X65.125 Y100.228 E0.01480 ; perimeter
G1 X65.439 Y100.074 E0.01442 ; perimeter
G1 X65.656 Y99.995 E0.00948 ; perimeter
G1 X66.004 Y99.905 E0.01483 ; perimeter
G1 X66.349 Y99.857 E0.01434 ; perimeter
G1 X66.688 Y99.846 E0.01395 ; perimeter
G1 X66.913 Y99.860 E0.00928 ; perimeter
G1 X81.511 Y112.109 E0.78506 ; perimeter
G1 X86.648 Y112.109 E0.21162 ; perimeter
G1 X95.363 Y119.422 E0.46869 ; perimeter
G1 X105.319 Y119.422 E0.41014 ; perimeter
G1 X105.319 Y121.132 E0.07041 ; perimeter
G1 X94.741 Y121.132 E0.43577 ; perimeter
G1 X88.795 Y116.143 E0.31976 ; perimeter
G1 X76.352 Y130.972 E0.79749 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.225 Y130.628 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.600 F10800.000 ; lift Z
G1 X144.903 Y120.339 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X144.903 Y120.215 E0.00510 ; perimeter
G1 X154.355 Y120.215 E0.38937 ; perimeter
G1 X163.070 Y112.902 E0.46869 ; perimeter
G1 X168.207 Y112.902 E0.21162 ; perimeter
G1 X182.819 Y100.641 E0.78580 ; perimeter
G1 X183.004 Y100.648 E0.00762 ; perimeter
G1 X168.252 Y113.026 E0.79331 ; perimeter
G1 X163.115 Y113.026 E0.21162 ; perimeter
G1 X154.400 Y120.339 E0.46869 ; perimeter
G1 X144.963 Y120.339 E0.38876 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X144.903 Y120.215 E-0.03178 ; wipe and retract
G1 X148.057 Y120.215 E-0.72822 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.600 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.683 Y115.584 E0.79997 ; perimeter
G1 X154.544 Y120.735 E0.33014 ; perimeter
G1 X144.507 Y120.735 E0.41350 ; perimeter
G1 X144.507 Y119.819 E0.03776 ; perimeter
G1 X154.210 Y119.819 E0.39976 ; perimeter
G1 X162.926 Y112.506 E0.46869 ; perimeter
G1 X168.063 Y112.506 E0.21162 ; perimeter
G1 X182.670 Y100.249 E0.78556 ; perimeter
G1 X183.046 Y100.253 E0.01546 ; perimeter
G1 X183.348 Y100.294 E0.01258 ; perimeter
G1 X183.656 Y100.374 E0.01310 ; perimeter
G1 X183.835 Y100.439 E0.00784 ; perimeter
G1 X184.106 Y100.572 E0.01242 ; perimeter
G1 X184.419 Y100.791 E0.01574 ; perimeter
G1 X183.860 Y101.259 E0.03002 ; perimeter
G1 X183.291 Y100.924 E0.02722 ; perimeter
G1 X168.396 Y113.422 E0.80099 ; perimeter
G1 X163.259 Y113.422 E0.21162 ; perimeter
G1 X161.093 Y115.240 E0.11650 ; perimeter
G1 X163.762 Y118.420 E0.17102 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.634 Y116.143 E0.79997 ; perimeter
G1 X154.688 Y121.132 E0.31976 ; perimeter
G1 X144.110 Y121.132 E0.43577 ; perimeter
G1 X144.110 Y119.422 E0.07041 ; perimeter
G1 X154.066 Y119.422 E0.41014 ; perimeter
G1 X162.782 Y112.109 E0.46869 ; perimeter
G1 X167.919 Y112.109 E0.21162 ; perimeter
G1 X182.517 Y99.860 E0.78504 ; perimeter
G1 X182.769 Y99.846 E0.01041 ; perimeter
G1 X183.080 Y99.857 E0.01282 ; perimeter
G1 X183.425 Y99.905 E0.01436 ; perimeter
G1 X183.774 Y99.995 E0.01483 ; perimeter
G1 X183.990 Y100.074 E0.00948 ; perimeter
G1 X184.305 Y100.228 E0.01442 ; perimeter
G1 X184.603 Y100.429 E0.01480 ; perimeter
G1 X184.733 Y100.537 E0.00700 ; perimeter
G1 X184.996 Y100.824 E0.01602 ; perimeter
G1 X183.870 Y101.769 E0.06057 ; perimeter
G1 X183.746 Y101.652 E0.00704 ; perimeter
G1 X183.331 Y101.408 E0.01980 ; perimeter
G1 X168.541 Y113.819 E0.79540 ; perimeter
G1 X163.404 Y113.819 E0.21162 ; perimeter
G1 X161.652 Y115.289 E0.09422 ; perimeter
G1 X163.810 Y117.862 E0.13836 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.600 F10800.000 ; lift Z
G1 X188.709 Y112.444 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X188.365 Y112.033 E0.02205 ; perimeter
G1 X191.104 Y109.734 E0.14734 ; perimeter
G1 X187.693 Y105.669 E0.21861 ; perimeter
G1 X184.953 Y107.968 E0.14734 ; perimeter
G1 X184.609 Y107.558 E0.02205 ; perimeter
G1 X187.349 Y105.259 E0.14734 ; perimeter
G1 X184.900 Y102.341 E0.15696 ; perimeter
G1 X185.408 Y101.915 E0.02730 ; perimeter
G1 X194.405 Y112.637 E0.57663 ; perimeter
G1 X193.898 Y113.063 E0.02729 ; perimeter
G1 X191.449 Y110.145 E0.15696 ; perimeter
G1 X188.755 Y112.405 E0.14487 ; perimeter
M204 S1000 ; adjust acceleration
G1 X188.660 Y113.002 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X187.806 Y111.985 E0.05471 ; perimeter
G1 X190.546 Y109.686 E0.14734 ; perimeter
G1 X187.644 Y106.228 E0.18596 ; perimeter
G1 X184.905 Y108.527 E0.14734 ; perimeter
G1 X184.051 Y107.509 E0.05471 ; perimeter
G1 X186.791 Y105.210 E0.14734 ; perimeter
G1 X184.342 Y102.292 E0.15696 ; perimeter
G1 X185.457 Y101.356 E0.05995 ; perimeter
G1 X194.963 Y112.686 E0.60929 ; perimeter
G1 X193.849 Y113.622 E0.05995 ; perimeter
G1 X191.400 Y110.703 E0.15696 ; perimeter
G1 X188.706 Y112.963 E0.14487 ; perimeter
M204 S1000 ; adjust acceleration
G1 X188.699 Y112.604 F10800.000 ; move inwards before travel
G1 F8640
G1 X187.806 Y111.985 E-0.30695 ; wipe and retract
G1 X189.309 Y110.723 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.600 F10800.000 ; lift Z
G1 X135.597 Y137.714 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X135.596 Y137.590 E0.00510 ; perimeter
G1 X171.348 Y137.590 E1.47280 ; perimeter
G1 X196.378 Y116.587 E1.34608 ; perimeter
G1 X196.353 Y116.770 E0.00762 ; perimeter
G1 X171.393 Y137.714 E1.34228 ; perimeter
G1 X135.657 Y137.714 E1.47218 ; perimeter
M204 S1000 ; adjust acceleration
G1 X135.201 Y138.110 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X135.199 Y137.193 E0.03776 ; perimeter
G1 X171.203 Y137.193 E1.48321 ; perimeter
G1 X196.156 Y116.256 E1.34186 ; perimeter
G1 X195.874 Y115.502 E0.03316 ; perimeter
G1 X195.627 Y115.124 E0.01861 ; perimeter
G1 X194.860 Y114.210 E0.04917 ; perimeter
G1 X195.367 Y113.784 E0.02729 ; perimeter
G1 X196.259 Y114.847 E0.05717 ; perimeter
G1 X196.452 Y115.114 E0.01359 ; perimeter
G1 X196.644 Y115.515 E0.01830 ; perimeter
G1 X196.728 Y115.805 E0.01242 ; perimeter
G1 X196.786 Y116.309 E0.02092 ; perimeter
G1 X196.775 Y116.614 E0.01258 ; perimeter
G1 X196.713 Y116.984 E0.01546 ; perimeter
G1 X171.537 Y138.110 E1.35392 ; perimeter
G1 X135.261 Y138.110 E1.49443 ; perimeter
M73 Q35 S89
M204 S1000 ; adjust acceleration
G1 F8640
G1 X135.199 Y137.193 E-0.21211 ; wipe and retract
G1 X137.572 Y137.193 E-0.54789 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.600 F10800.000 ; lift Z
G1 X134.802 Y136.797 ; move to first perimeter point
G1 Z7.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.059 Y136.797 E1.49362 ; perimeter
G1 X195.686 Y116.132 E1.32439 ; perimeter
G1 X195.518 Y115.682 E0.01980 ; perimeter
G1 X195.308 Y115.361 E0.01582 ; perimeter
G1 X194.301 Y114.161 E0.06453 ; perimeter
G1 X195.416 Y113.225 E0.05995 ; perimeter
G1 X196.572 Y114.603 E0.07410 ; perimeter
G1 X196.786 Y114.900 E0.01506 ; perimeter
G1 X197.018 Y115.379 E0.02192 ; perimeter
G1 X197.115 Y115.715 E0.01442 ; perimeter
G1 X197.155 Y115.942 E0.00948 ; perimeter
G1 X197.183 Y116.301 E0.01483 ; perimeter
G1 X197.170 Y116.649 E0.01436 ; perimeter
G1 X197.127 Y116.957 E0.01282 ; perimeter
G1 X197.069 Y117.203 E0.01041 ; perimeter
G1 X171.681 Y138.506 E1.36529 ; perimeter
G1 X134.805 Y138.506 E1.51914 ; perimeter
G1 X134.803 Y136.857 E0.06794 ; perimeter
M204 S1000 ; adjust acceleration
G1 X135.202 Y136.803 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;7.25


G1 F8640
G1 X138.094 Y136.852 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;7.25
G1 X113.210 Y99.743 ; move to first perimeter point
G1 Z7.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.258 Y99.743 E1.43986 ; perimeter
G1 X53.290 Y78.792 E1.34273 ; perimeter
G1 X53.243 Y78.591 E0.00849 ; perimeter
G1 X78.303 Y99.619 E1.34765 ; perimeter
G1 X113.210 Y99.619 E1.43801 ; perimeter
G1 X113.210 Y99.683 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 X113.606 Y100.139 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.114 Y100.139 E1.46210 ; perimeter
G1 X52.945 Y79.020 E1.35352 ; perimeter
G1 X52.842 Y78.614 E0.01723 ; perimeter
G1 X52.807 Y78.360 E0.01058 ; perimeter
G1 X52.795 Y78.048 E0.01285 ; perimeter
G1 X52.852 Y77.550 E0.02064 ; perimeter
G1 X52.934 Y77.265 E0.01224 ; perimeter
G1 X53.138 Y76.843 E0.01932 ; perimeter
G1 X53.322 Y76.588 E0.01293 ; perimeter
G1 X54.214 Y75.525 E0.05716 ; perimeter
G1 X54.721 Y75.951 E0.02729 ; perimeter
G1 X53.963 Y76.855 E0.04861 ; perimeter
G1 X53.799 Y77.083 E0.01156 ; perimeter
G1 X53.602 Y77.492 E0.01872 ; perimeter
G1 X53.425 Y78.226 E0.03110 ; perimeter
G1 X78.448 Y99.222 E1.34563 ; perimeter
G1 X113.607 Y99.222 E1.44843 ; perimeter
G1 X113.606 Y100.079 E0.03529 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X110.314 Y100.084 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.850 F10800.000 ; lift Z
G1 X53.868 Y78.080 ; move to first perimeter point
G1 Z7.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.592 Y98.826 E1.32958 ; perimeter
G1 X114.005 Y98.826 E1.45885 ; perimeter
G1 X114.001 Y100.535 E0.07041 ; perimeter
G1 X77.970 Y100.535 E1.48433 ; perimeter
G1 X52.605 Y79.252 E1.36404 ; perimeter
G1 X52.535 Y79.043 E0.00906 ; perimeter
G1 X52.452 Y78.686 E0.01510 ; perimeter
G1 X52.411 Y78.395 E0.01213 ; perimeter
G1 X52.398 Y78.039 E0.01465 ; perimeter
G1 X52.428 Y77.674 E0.01509 ; perimeter
G1 X52.465 Y77.461 E0.00892 ; perimeter
G1 X52.562 Y77.122 E0.01451 ; perimeter
G1 X52.797 Y76.639 E0.02213 ; perimeter
G1 X53.009 Y76.345 E0.01495 ; perimeter
G1 X54.165 Y74.967 E0.07409 ; perimeter
G1 X55.280 Y75.902 E0.05995 ; perimeter
G1 X54.276 Y77.098 E0.06432 ; perimeter
G1 X54.141 Y77.286 E0.00952 ; perimeter
G1 X53.977 Y77.626 E0.01555 ; perimeter
G1 X53.882 Y78.022 E0.01677 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.650 Y78.416 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.400 Y80.142 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.850 F10800.000 ; lift Z
G1 X60.867 Y74.181 ; move to first perimeter point
G1 Z7.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X58.132 Y71.886 E0.14707 ; perimeter
G1 X55.683 Y74.804 E0.15696 ; perimeter
G1 X55.176 Y74.379 E0.02729 ; perimeter
G1 X64.173 Y63.656 E0.57663 ; perimeter
G1 X64.680 Y64.082 E0.02729 ; perimeter
G1 X62.231 Y67.001 E0.15696 ; perimeter
G1 X64.966 Y69.295 E0.14707 ; perimeter
G1 X64.622 Y69.705 E0.02205 ; perimeter
G1 X61.887 Y67.411 E0.14707 ; perimeter
G1 X58.476 Y71.476 E0.21861 ; perimeter
G1 X61.211 Y73.771 E0.14707 ; perimeter
G1 X60.906 Y74.135 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.916 Y74.739 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X58.181 Y72.444 E0.14707 ; perimeter
G1 X55.732 Y75.363 E0.15696 ; perimeter
G1 X54.617 Y74.427 E0.05995 ; perimeter
G1 X64.124 Y63.098 E0.60929 ; perimeter
G1 X65.239 Y64.033 E0.05995 ; perimeter
G1 X62.790 Y66.952 E0.15696 ; perimeter
G1 X65.525 Y69.246 E0.14707 ; perimeter
G1 X64.671 Y70.264 E0.05471 ; perimeter
G1 X61.936 Y67.969 E0.14707 ; perimeter
G1 X59.035 Y71.427 E0.18596 ; perimeter
G1 X61.769 Y73.722 E0.14707 ; perimeter
G1 X60.954 Y74.693 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.642 Y74.447 F10800.000 ; move inwards before travel
G1 F8640
G1 X58.398 Y72.620 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.850 F10800.000 ; lift Z
G1 X104.562 Y82.018 ; move to first perimeter point
G1 Z7.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.379 Y82.018 E0.37831 ; perimeter
G1 X86.663 Y74.705 E0.46869 ; perimeter
G1 X81.526 Y74.705 E0.21162 ; perimeter
G1 X66.840 Y62.382 E0.78977 ; perimeter
G1 X67.048 Y62.394 E0.00857 ; perimeter
G1 X81.571 Y74.581 E0.78104 ; perimeter
G1 X86.708 Y74.581 E0.21162 ; perimeter
G1 X95.424 Y81.894 E0.46869 ; perimeter
G1 X104.562 Y81.894 E0.37645 ; perimeter
G1 X104.562 Y81.958 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X101.271 Y81.979 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.850 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z7.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.734 Y76.960 E0.17823 ; perimeter
G1 X86.519 Y75.101 E0.11912 ; perimeter
G1 X81.382 Y75.101 E0.21162 ; perimeter
G1 X66.515 Y62.626 E0.79950 ; perimeter
G1 X65.837 Y62.921 E0.03045 ; perimeter
G1 X65.718 Y62.998 E0.00587 ; perimeter
G1 X65.162 Y62.532 E0.02988 ; perimeter
G1 X65.474 Y62.314 E0.01570 ; perimeter
G1 X65.917 Y62.118 E0.01992 ; perimeter
G1 X66.230 Y62.036 E0.01336 ; perimeter
G1 X66.537 Y61.994 E0.01276 ; perimeter
G1 X66.845 Y61.985 E0.01268 ; perimeter
G1 X67.213 Y62.015 E0.01522 ; perimeter
G1 X81.716 Y74.185 E0.77991 ; perimeter
G1 X86.853 Y74.185 E0.21162 ; perimeter
G1 X95.568 Y81.498 E0.46869 ; perimeter
G1 X104.958 Y81.498 E0.38683 ; perimeter
G1 X104.958 Y82.414 E0.03776 ; perimeter
G1 X95.235 Y82.414 E0.40058 ; perimeter
G1 X89.144 Y77.304 E0.32752 ; perimeter
G1 X76.588 Y92.268 E0.80471 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X88.176 Y77.009 E0.14557 ; perimeter
G1 X86.375 Y75.497 E0.09685 ; perimeter
G1 X81.238 Y75.497 E0.21162 ; perimeter
G1 X66.448 Y63.088 E0.79534 ; perimeter
G1 X66.025 Y63.272 E0.01901 ; perimeter
G1 X65.830 Y63.398 E0.00958 ; perimeter
G1 X65.711 Y63.510 E0.00674 ; perimeter
G1 X64.585 Y62.565 E0.06055 ; perimeter
G1 X64.851 Y62.275 E0.01622 ; perimeter
G1 X64.973 Y62.174 E0.00655 ; perimeter
G1 X65.275 Y61.970 E0.01501 ; perimeter
G1 X65.595 Y61.813 E0.01466 ; perimeter
G1 X65.799 Y61.739 E0.00892 ; perimeter
G1 X66.153 Y61.647 E0.01509 ; perimeter
G1 X66.504 Y61.598 E0.01462 ; perimeter
G1 X66.851 Y61.588 E0.01428 ; perimeter
G1 X67.383 Y61.640 E0.02201 ; perimeter
G1 X81.860 Y73.788 E0.77855 ; perimeter
G1 X86.997 Y73.788 E0.21162 ; perimeter
G1 X95.712 Y81.101 E0.46869 ; perimeter
G1 X105.355 Y81.101 E0.39722 ; perimeter
G1 X105.355 Y82.811 E0.07041 ; perimeter
G1 X95.090 Y82.811 E0.42285 ; perimeter
G1 X89.193 Y77.862 E0.31713 ; perimeter
G1 X76.637 Y92.826 E0.80471 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.510 Y92.482 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.850 F10800.000 ; lift Z
G1 X145.438 Y82.018 ; move to first perimeter point
G1 Z7.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X145.438 Y81.894 E0.00510 ; perimeter
G1 X154.576 Y81.894 E0.37645 ; perimeter
G1 X163.292 Y74.581 E0.46869 ; perimeter
G1 X168.429 Y74.581 E0.21162 ; perimeter
G1 X182.952 Y62.394 E0.78104 ; perimeter
G1 X183.160 Y62.382 E0.00857 ; perimeter
G1 X168.474 Y74.705 E0.78977 ; perimeter
G1 X163.337 Y74.705 E0.21162 ; perimeter
G1 X154.621 Y82.018 E0.46869 ; perimeter
G1 X145.498 Y82.018 E0.37584 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X145.438 Y81.894 E-0.03178 ; wipe and retract
G1 X148.592 Y81.894 E-0.72822 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.850 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z7.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.856 Y77.304 E0.80718 ; perimeter
G1 X154.765 Y82.414 E0.32752 ; perimeter
G1 X145.042 Y82.414 E0.40058 ; perimeter
G1 X145.042 Y81.498 E0.03776 ; perimeter
G1 X154.432 Y81.498 E0.38683 ; perimeter
G1 X163.147 Y74.185 E0.46869 ; perimeter
G1 X168.284 Y74.185 E0.21162 ; perimeter
G1 X182.787 Y62.015 E0.77991 ; perimeter
M73 P36 R87
G1 X183.155 Y61.985 E0.01522 ; perimeter
G1 X183.463 Y61.994 E0.01268 ; perimeter
G1 X183.770 Y62.036 E0.01276 ; perimeter
G1 X184.083 Y62.118 E0.01336 ; perimeter
G1 X184.517 Y62.309 E0.01951 ; perimeter
G1 X184.832 Y62.537 E0.01603 ; perimeter
G1 X184.282 Y62.998 E0.02956 ; perimeter
G1 X184.163 Y62.921 E0.00588 ; perimeter
G1 X183.485 Y62.626 E0.03045 ; perimeter
G1 X168.618 Y75.101 E0.79950 ; perimeter
G1 X163.481 Y75.101 E0.21162 ; perimeter
G1 X161.266 Y76.960 E0.11912 ; perimeter
G1 X164.047 Y80.274 E0.17823 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.807 Y77.862 E0.80718 ; perimeter
G1 X154.910 Y82.811 E0.31713 ; perimeter
G1 X144.645 Y82.811 E0.42285 ; perimeter
G1 X144.645 Y81.101 E0.07041 ; perimeter
G1 X154.288 Y81.101 E0.39722 ; perimeter
G1 X163.003 Y73.788 E0.46869 ; perimeter
G1 X168.140 Y73.788 E0.21162 ; perimeter
G1 X182.617 Y61.640 E0.77855 ; perimeter
G1 X183.149 Y61.588 E0.02201 ; perimeter
G1 X183.496 Y61.598 E0.01428 ; perimeter
G1 X183.847 Y61.647 E0.01462 ; perimeter
G1 X184.201 Y61.739 E0.01509 ; perimeter
G1 X184.405 Y61.813 E0.00892 ; perimeter
G1 X184.722 Y61.968 E0.01451 ; perimeter
G1 X185.154 Y62.281 E0.02199 ; perimeter
G1 X185.415 Y62.565 E0.01591 ; perimeter
G1 X184.289 Y63.510 E0.06055 ; perimeter
G1 X184.170 Y63.398 E0.00674 ; perimeter
G1 X183.975 Y63.272 E0.00958 ; perimeter
G1 X183.552 Y63.088 E0.01901 ; perimeter
G1 X168.762 Y75.497 E0.79534 ; perimeter
G1 X163.625 Y75.497 E0.21162 ; perimeter
G1 X161.824 Y77.009 E0.09685 ; perimeter
G1 X164.096 Y79.716 E0.14557 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.850 F10800.000 ; lift Z
G1 X189.133 Y74.181 ; move to first perimeter point
G1 Z7.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X188.789 Y73.771 E0.02205 ; perimeter
G1 X191.524 Y71.476 E0.14707 ; perimeter
G1 X188.113 Y67.411 E0.21861 ; perimeter
G1 X185.378 Y69.705 E0.14707 ; perimeter
G1 X185.034 Y69.295 E0.02205 ; perimeter
G1 X187.769 Y67.001 E0.14707 ; perimeter
G1 X185.320 Y64.082 E0.15696 ; perimeter
G1 X185.827 Y63.656 E0.02730 ; perimeter
G1 X194.824 Y74.379 E0.57663 ; perimeter
G1 X194.317 Y74.804 E0.02729 ; perimeter
G1 X191.868 Y71.886 E0.15696 ; perimeter
G1 X189.179 Y74.142 E0.14460 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.084 Y74.739 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X188.231 Y73.722 E0.05471 ; perimeter
G1 X190.965 Y71.427 E0.14707 ; perimeter
G1 X188.064 Y67.969 E0.18596 ; perimeter
G1 X185.329 Y70.264 E0.14707 ; perimeter
G1 X184.475 Y69.246 E0.05471 ; perimeter
G1 X187.210 Y66.952 E0.14707 ; perimeter
G1 X184.761 Y64.033 E0.15696 ; perimeter
G1 X185.876 Y63.098 E0.05995 ; perimeter
G1 X195.383 Y74.427 E0.60929 ; perimeter
G1 X194.268 Y75.363 E0.05995 ; perimeter
G1 X191.819 Y72.444 E0.15696 ; perimeter
G1 X189.130 Y74.700 E0.14460 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.123 Y74.341 F10800.000 ; move inwards before travel
G1 F8640
G1 X188.231 Y73.722 E-0.30695 ; wipe and retract
G1 X189.734 Y72.461 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.850 F10800.000 ; lift Z
G1 X136.790 Y99.743 ; move to first perimeter point
G1 Z7.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X136.790 Y99.619 E0.00510 ; perimeter
G1 X171.697 Y99.619 E1.43801 ; perimeter
G1 X196.757 Y78.591 E1.34765 ; perimeter
G1 X196.710 Y78.792 E0.00849 ; perimeter
G1 X171.742 Y99.743 E1.34273 ; perimeter
G1 X136.850 Y99.743 E1.43739 ; perimeter
M204 S1000 ; adjust acceleration
G1 X136.394 Y100.139 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X136.393 Y99.222 E0.03776 ; perimeter
G1 X171.552 Y99.222 E1.44843 ; perimeter
G1 X196.575 Y78.226 E1.34563 ; perimeter
G1 X196.397 Y77.488 E0.03126 ; perimeter
G1 X196.168 Y77.026 E0.02128 ; perimeter
G1 X195.276 Y75.953 E0.05745 ; perimeter
G1 X195.786 Y75.525 E0.02742 ; perimeter
G1 X196.678 Y76.588 E0.05716 ; perimeter
G1 X196.862 Y76.843 E0.01293 ; perimeter
G1 X197.066 Y77.265 E0.01932 ; perimeter
G1 X197.148 Y77.550 E0.01224 ; perimeter
G1 X197.205 Y78.048 E0.02064 ; perimeter
G1 X197.193 Y78.360 E0.01285 ; perimeter
G1 X197.158 Y78.614 E0.01058 ; perimeter
G1 X197.055 Y79.020 E0.01724 ; perimeter
G1 X171.886 Y100.139 E1.35352 ; perimeter
G1 X136.454 Y100.139 E1.45962 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X136.393 Y99.222 E-0.21212 ; wipe and retract
G1 X138.765 Y99.222 E-0.54788 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.850 F10800.000 ; lift Z
G1 X135.995 Y98.826 ; move to first perimeter point
G1 Z7.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.408 Y98.826 E1.45885 ; perimeter
G1 X196.132 Y78.080 E1.32958 ; perimeter
G1 X196.023 Y77.625 E0.01930 ; perimeter
G1 X195.833 Y77.244 E0.01753 ; perimeter
G1 X194.720 Y75.903 E0.07180 ; perimeter
G1 X195.835 Y74.967 E0.06000 ; perimeter
G1 X196.991 Y76.345 E0.07409 ; perimeter
G1 X197.203 Y76.639 E0.01495 ; perimeter
G1 X197.438 Y77.122 E0.02213 ; perimeter
G1 X197.535 Y77.461 E0.01451 ; perimeter
G1 X197.572 Y77.674 E0.00892 ; perimeter
G1 X197.602 Y78.039 E0.01509 ; perimeter
G1 X197.589 Y78.395 E0.01465 ; perimeter
G1 X197.548 Y78.686 E0.01213 ; perimeter
G1 X197.465 Y79.043 E0.01510 ; perimeter
G1 X197.395 Y79.252 E0.00906 ; perimeter
G1 X172.030 Y100.535 E1.36404 ; perimeter
G1 X135.999 Y100.535 E1.48433 ; perimeter
G1 X135.995 Y98.886 E0.06794 ; perimeter
M204 S1000 ; adjust acceleration
G1 X136.395 Y98.832 F10800.000 ; move inwards before travel
G1 F8640
G1 X139.287 Y98.880 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.850 F10800.000 ; lift Z
G1 X112.925 Y137.889 ; move to first perimeter point
G1 Z7.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X77.973 Y137.889 E1.43986 ; perimeter
G1 X53.005 Y116.938 E1.34273 ; perimeter
G1 X52.958 Y116.737 E0.00849 ; perimeter
G1 X78.018 Y137.765 E1.34765 ; perimeter
G1 X112.925 Y137.765 E1.43801 ; perimeter
G1 X112.925 Y137.829 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 X113.320 Y138.285 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X77.829 Y138.285 E1.46210 ; perimeter
G1 X52.660 Y117.166 E1.35352 ; perimeter
G1 X52.557 Y116.760 E0.01723 ; perimeter
G1 X52.521 Y116.506 E0.01058 ; perimeter
G1 X52.510 Y116.194 E0.01285 ; perimeter
G1 X52.567 Y115.696 E0.02064 ; perimeter
G1 X52.649 Y115.411 E0.01224 ; perimeter
G1 X52.853 Y114.989 E0.01932 ; perimeter
G1 X53.037 Y114.734 E0.01293 ; perimeter
G1 X53.928 Y113.671 E0.05716 ; perimeter
G1 X54.436 Y114.097 E0.02729 ; perimeter
G1 X53.678 Y115.001 E0.04861 ; perimeter
G1 X53.514 Y115.229 E0.01156 ; perimeter
G1 X53.316 Y115.638 E0.01872 ; perimeter
G1 X53.140 Y116.372 E0.03110 ; perimeter
G1 X78.163 Y137.368 E1.34563 ; perimeter
G1 X113.322 Y137.368 E1.44843 ; perimeter
G1 X113.320 Y138.225 E0.03529 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X110.029 Y138.231 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.850 F10800.000 ; lift Z
G1 X53.583 Y116.226 ; move to first perimeter point
G1 Z7.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.307 Y136.972 E1.32958 ; perimeter
G1 X113.719 Y136.972 E1.45885 ; perimeter
G1 X113.716 Y138.681 E0.07041 ; perimeter
G1 X77.685 Y138.681 E1.48433 ; perimeter
G1 X52.320 Y117.398 E1.36404 ; perimeter
G1 X52.249 Y117.189 E0.00906 ; perimeter
G1 X52.167 Y116.832 E0.01510 ; perimeter
G1 X52.126 Y116.541 E0.01213 ; perimeter
G1 X52.113 Y116.186 E0.01465 ; perimeter
G1 X52.142 Y115.821 E0.01509 ; perimeter
G1 X52.180 Y115.607 E0.00892 ; perimeter
G1 X52.277 Y115.269 E0.01451 ; perimeter
G1 X52.512 Y114.785 E0.02213 ; perimeter
G1 X52.723 Y114.491 E0.01495 ; perimeter
G1 X53.880 Y113.113 E0.07409 ; perimeter
G1 X54.994 Y114.048 E0.05995 ; perimeter
G1 X53.991 Y115.244 E0.06432 ; perimeter
G1 X53.856 Y115.432 E0.00952 ; perimeter
G1 X53.692 Y115.772 E0.01555 ; perimeter
G1 X53.597 Y116.168 E0.01677 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.365 Y116.562 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.115 Y118.288 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.850 F10800.000 ; lift Z
G1 X60.582 Y112.327 ; move to first perimeter point
G1 Z7.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.847 Y110.032 E0.14707 ; perimeter
G1 X55.398 Y112.951 E0.15696 ; perimeter
G1 X54.890 Y112.525 E0.02729 ; perimeter
G1 X63.888 Y101.802 E0.57663 ; perimeter
G1 X64.395 Y102.228 E0.02729 ; perimeter
G1 X61.946 Y105.147 E0.15696 ; perimeter
G1 X64.681 Y107.441 E0.14707 ; perimeter
G1 X64.337 Y107.852 E0.02205 ; perimeter
G1 X61.602 Y105.557 E0.14707 ; perimeter
G1 X58.191 Y109.622 E0.21861 ; perimeter
G1 X60.926 Y111.917 E0.14707 ; perimeter
G1 X60.620 Y112.281 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.631 Y112.885 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X57.896 Y110.590 E0.14707 ; perimeter
G1 X55.447 Y113.509 E0.15696 ; perimeter
G1 X54.332 Y112.574 E0.05995 ; perimeter
G1 X63.839 Y101.244 E0.60929 ; perimeter
G1 X64.954 Y102.179 E0.05995 ; perimeter
G1 X62.505 Y105.098 E0.15696 ; perimeter
G1 X65.239 Y107.393 E0.14707 ; perimeter
G1 X64.386 Y108.410 E0.05471 ; perimeter
G1 X61.651 Y106.115 E0.14707 ; perimeter
G1 X58.749 Y109.573 E0.18596 ; perimeter
G1 X61.484 Y111.868 E0.14707 ; perimeter
G1 X60.669 Y112.839 E0.05224 ; perimeter
M73 Q36 S88
M204 S1000 ; adjust acceleration
G1 X60.357 Y112.594 F10800.000 ; move inwards before travel
G1 F8640
G1 X58.113 Y110.766 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.850 F10800.000 ; lift Z
G1 X104.277 Y120.164 ; move to first perimeter point
G1 Z7.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.094 Y120.164 E0.37831 ; perimeter
G1 X86.378 Y112.851 E0.46869 ; perimeter
G1 X81.241 Y112.851 E0.21162 ; perimeter
G1 X66.555 Y100.528 E0.78977 ; perimeter
G1 X66.763 Y100.540 E0.00857 ; perimeter
G1 X81.286 Y112.727 E0.78104 ; perimeter
G1 X86.423 Y112.727 E0.21162 ; perimeter
G1 X95.139 Y120.040 E0.46869 ; perimeter
G1 X104.277 Y120.040 E0.37645 ; perimeter
G1 X104.277 Y120.104 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X100.985 Y120.126 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.850 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z7.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.449 Y115.106 E0.17823 ; perimeter
G1 X86.234 Y113.247 E0.11912 ; perimeter
G1 X81.097 Y113.247 E0.21162 ; perimeter
G1 X66.230 Y100.772 E0.79950 ; perimeter
G1 X65.552 Y101.067 E0.03045 ; perimeter
G1 X65.432 Y101.145 E0.00587 ; perimeter
G1 X64.877 Y100.678 E0.02988 ; perimeter
G1 X65.189 Y100.460 E0.01570 ; perimeter
G1 X65.631 Y100.264 E0.01992 ; perimeter
G1 X65.945 Y100.182 E0.01336 ; perimeter
G1 X66.252 Y100.140 E0.01276 ; perimeter
G1 X66.560 Y100.131 E0.01268 ; perimeter
G1 X66.928 Y100.162 E0.01522 ; perimeter
G1 X81.431 Y112.331 E0.77991 ; perimeter
G1 X86.568 Y112.331 E0.21162 ; perimeter
G1 X95.283 Y119.644 E0.46869 ; perimeter
G1 X104.673 Y119.644 E0.38683 ; perimeter
G1 X104.673 Y120.560 E0.03776 ; perimeter
G1 X94.949 Y120.560 E0.40058 ; perimeter
G1 X88.859 Y115.450 E0.32752 ; perimeter
G1 X76.303 Y130.414 E0.80471 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X87.891 Y115.155 E0.14557 ; perimeter
G1 X86.090 Y113.644 E0.09685 ; perimeter
G1 X80.953 Y113.644 E0.21162 ; perimeter
G1 X66.163 Y101.234 E0.79534 ; perimeter
G1 X65.740 Y101.418 E0.01901 ; perimeter
G1 X65.545 Y101.544 E0.00958 ; perimeter
G1 X65.425 Y101.656 E0.00674 ; perimeter
G1 X64.299 Y100.711 E0.06055 ; perimeter
G1 X64.566 Y100.421 E0.01622 ; perimeter
G1 X64.688 Y100.320 E0.00655 ; perimeter
G1 X64.990 Y100.116 E0.01501 ; perimeter
G1 X65.310 Y99.959 E0.01466 ; perimeter
G1 X65.513 Y99.886 E0.00892 ; perimeter
G1 X65.868 Y99.793 E0.01509 ; perimeter
G1 X66.219 Y99.745 E0.01462 ; perimeter
G1 X66.566 Y99.734 E0.01428 ; perimeter
G1 X67.098 Y99.787 E0.02201 ; perimeter
G1 X81.575 Y111.934 E0.77855 ; perimeter
G1 X86.712 Y111.934 E0.21162 ; perimeter
G1 X95.427 Y119.247 E0.46869 ; perimeter
G1 X105.069 Y119.247 E0.39722 ; perimeter
G1 X105.069 Y120.957 E0.07041 ; perimeter
G1 X94.805 Y120.957 E0.42285 ; perimeter
G1 X88.908 Y116.008 E0.31713 ; perimeter
G1 X76.352 Y130.972 E0.80471 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.224 Y130.628 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.850 F10800.000 ; lift Z
G1 X145.153 Y120.164 ; move to first perimeter point
G1 Z7.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X145.153 Y120.040 E0.00510 ; perimeter
G1 X154.291 Y120.040 E0.37645 ; perimeter
G1 X163.006 Y112.727 E0.46869 ; perimeter
G1 X168.143 Y112.727 E0.21162 ; perimeter
G1 X182.667 Y100.540 E0.78104 ; perimeter
G1 X182.874 Y100.528 E0.00857 ; perimeter
G1 X168.188 Y112.851 E0.78977 ; perimeter
G1 X163.051 Y112.851 E0.21162 ; perimeter
G1 X154.336 Y120.164 E0.46869 ; perimeter
G1 X145.213 Y120.164 E0.37584 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X145.153 Y120.040 E-0.03178 ; wipe and retract
G1 X148.307 Y120.040 E-0.72822 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.850 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z7.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.571 Y115.450 E0.80718 ; perimeter
G1 X154.480 Y120.560 E0.32752 ; perimeter
G1 X144.757 Y120.560 E0.40058 ; perimeter
G1 X144.757 Y119.644 E0.03776 ; perimeter
G1 X154.147 Y119.644 E0.38683 ; perimeter
G1 X162.862 Y112.331 E0.46869 ; perimeter
G1 X167.999 Y112.331 E0.21162 ; perimeter
G1 X182.502 Y100.162 E0.77991 ; perimeter
G1 X182.870 Y100.131 E0.01522 ; perimeter
G1 X183.178 Y100.140 E0.01268 ; perimeter
G1 X183.485 Y100.182 E0.01276 ; perimeter
G1 X183.798 Y100.264 E0.01336 ; perimeter
G1 X184.232 Y100.455 E0.01951 ; perimeter
G1 X184.547 Y100.683 E0.01603 ; perimeter
G1 X183.997 Y101.145 E0.02956 ; perimeter
G1 X183.877 Y101.067 E0.00588 ; perimeter
G1 X183.200 Y100.772 E0.03045 ; perimeter
G1 X168.333 Y113.247 E0.79950 ; perimeter
G1 X163.196 Y113.247 E0.21162 ; perimeter
G1 X160.981 Y115.106 E0.11912 ; perimeter
G1 X163.762 Y118.420 E0.17823 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.522 Y116.008 E0.80718 ; perimeter
G1 X154.625 Y120.957 E0.31713 ; perimeter
G1 X144.360 Y120.957 E0.42285 ; perimeter
G1 X144.360 Y119.247 E0.07041 ; perimeter
G1 X154.002 Y119.247 E0.39722 ; perimeter
G1 X162.718 Y111.934 E0.46869 ; perimeter
G1 X167.855 Y111.934 E0.21162 ; perimeter
G1 X182.332 Y99.787 E0.77855 ; perimeter
G1 X182.864 Y99.734 E0.02201 ; perimeter
G1 X183.210 Y99.745 E0.01428 ; perimeter
G1 X183.562 Y99.793 E0.01462 ; perimeter
G1 X183.916 Y99.886 E0.01509 ; perimeter
G1 X184.120 Y99.959 E0.00892 ; perimeter
G1 X184.436 Y100.114 E0.01451 ; perimeter
G1 X184.869 Y100.427 E0.02199 ; perimeter
G1 X185.130 Y100.711 E0.01591 ; perimeter
G1 X184.004 Y101.656 E0.06055 ; perimeter
G1 X183.885 Y101.544 E0.00674 ; perimeter
G1 X183.690 Y101.418 E0.00958 ; perimeter
G1 X183.267 Y101.234 E0.01901 ; perimeter
G1 X168.477 Y113.644 E0.79534 ; perimeter
G1 X163.340 Y113.644 E0.21162 ; perimeter
G1 X161.539 Y115.155 E0.09685 ; perimeter
G1 X163.810 Y117.862 E0.14557 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.850 F10800.000 ; lift Z
G1 X188.848 Y112.327 ; move to first perimeter point
G1 Z7.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X188.504 Y111.917 E0.02205 ; perimeter
G1 X191.239 Y109.622 E0.14707 ; perimeter
G1 X187.827 Y105.557 E0.21861 ; perimeter
G1 X185.093 Y107.852 E0.14707 ; perimeter
G1 X184.749 Y107.441 E0.02205 ; perimeter
G1 X187.483 Y105.147 E0.14707 ; perimeter
G1 X185.034 Y102.228 E0.15696 ; perimeter
G1 X185.542 Y101.802 E0.02730 ; perimeter
G1 X194.539 Y112.525 E0.57663 ; perimeter
G1 X194.032 Y112.951 E0.02729 ; perimeter
G1 X191.583 Y110.032 E0.15696 ; perimeter
G1 X188.894 Y112.288 E0.14460 ; perimeter
M204 S1000 ; adjust acceleration
G1 X188.799 Y112.885 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X187.945 Y111.868 E0.05471 ; perimeter
G1 X190.680 Y109.573 E0.14707 ; perimeter
G1 X187.779 Y106.115 E0.18596 ; perimeter
G1 X185.044 Y108.410 E0.14707 ; perimeter
G1 X184.190 Y107.393 E0.05471 ; perimeter
G1 X186.925 Y105.098 E0.14707 ; perimeter
G1 X184.476 Y102.179 E0.15696 ; perimeter
G1 X185.591 Y101.244 E0.05995 ; perimeter
G1 X195.098 Y112.574 E0.60929 ; perimeter
G1 X193.983 Y113.509 E0.05995 ; perimeter
G1 X191.534 Y110.590 E0.15696 ; perimeter
G1 X188.845 Y112.847 E0.14460 ; perimeter
M204 S1000 ; adjust acceleration
G1 X188.838 Y112.487 F10800.000 ; move inwards before travel
G1 F8640
G1 X187.945 Y111.868 E-0.30695 ; wipe and retract
G1 X189.448 Y110.607 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.850 F10800.000 ; lift Z
G1 X136.505 Y137.889 ; move to first perimeter point
G1 Z7.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X136.505 Y137.765 E0.00510 ; perimeter
G1 X171.411 Y137.765 E1.43801 ; perimeter
G1 X196.471 Y116.737 E1.34765 ; perimeter
G1 X196.425 Y116.938 E0.00849 ; perimeter
G1 X171.456 Y137.889 E1.34273 ; perimeter
G1 X136.565 Y137.889 E1.43739 ; perimeter
M204 S1000 ; adjust acceleration
G1 X136.109 Y138.285 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X136.107 Y137.368 E0.03776 ; perimeter
G1 X171.267 Y137.368 E1.44843 ; perimeter
G1 X196.289 Y116.372 E1.34563 ; perimeter
G1 X196.112 Y115.635 E0.03126 ; perimeter
G1 X195.882 Y115.172 E0.02128 ; perimeter
G1 X194.991 Y114.099 E0.05745 ; perimeter
G1 X195.501 Y113.671 E0.02742 ; perimeter
G1 X196.393 Y114.734 E0.05716 ; perimeter
G1 X196.576 Y114.989 E0.01293 ; perimeter
G1 X196.781 Y115.411 E0.01932 ; perimeter
G1 X196.863 Y115.696 E0.01224 ; perimeter
G1 X196.920 Y116.194 E0.02064 ; perimeter
G1 X196.908 Y116.506 E0.01285 ; perimeter
G1 X196.873 Y116.760 E0.01058 ; perimeter
G1 X196.770 Y117.166 E0.01724 ; perimeter
G1 X171.601 Y138.285 E1.35352 ; perimeter
G1 X136.169 Y138.285 E1.45962 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X136.107 Y137.368 E-0.21212 ; wipe and retract
G1 X138.480 Y137.368 E-0.54788 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.850 F10800.000 ; lift Z
G1 X135.710 Y136.972 ; move to first perimeter point
G1 Z7.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.123 Y136.972 E1.45885 ; perimeter
G1 X195.847 Y116.226 E1.32958 ; perimeter
G1 X195.737 Y115.771 E0.01930 ; perimeter
G1 X195.548 Y115.390 E0.01753 ; perimeter
G1 X194.434 Y114.049 E0.07180 ; perimeter
G1 X195.550 Y113.113 E0.06000 ; perimeter
G1 X196.706 Y114.491 E0.07409 ; perimeter
G1 X196.918 Y114.785 E0.01495 ; perimeter
G1 X197.152 Y115.269 E0.02213 ; perimeter
G1 X197.250 Y115.607 E0.01451 ; perimeter
G1 X197.287 Y115.821 E0.00892 ; perimeter
G1 X197.317 Y116.186 E0.01509 ; perimeter
G1 X197.304 Y116.541 E0.01465 ; perimeter
G1 X197.263 Y116.832 E0.01213 ; perimeter
G1 X197.180 Y117.189 E0.01510 ; perimeter
G1 X197.110 Y117.398 E0.00906 ; perimeter
G1 X171.745 Y138.681 E1.36404 ; perimeter
M73 P37 R86
G1 X135.714 Y138.681 E1.48433 ; perimeter
G1 X135.710 Y137.032 E0.06794 ; perimeter
M204 S1000 ; adjust acceleration
G1 X136.110 Y136.978 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;7.5


G1 F8640
G1 X139.002 Y137.027 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z7.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;7.5
G1 X112.379 Y99.918 ; move to first perimeter point
G1 Z7.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.195 Y99.918 E1.40823 ; perimeter
G1 X53.260 Y78.995 E1.34089 ; perimeter
G1 X53.183 Y78.768 E0.00988 ; perimeter
G1 X78.240 Y99.794 E1.34750 ; perimeter
G1 X112.379 Y99.794 E1.40638 ; perimeter
G1 X112.379 Y99.858 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 X112.774 Y100.314 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.050 Y100.314 E1.43047 ; perimeter
G1 X52.934 Y79.239 E1.35068 ; perimeter
G1 X52.780 Y78.815 E0.01856 ; perimeter
G1 X52.673 Y78.249 E0.02377 ; perimeter
G1 X52.661 Y77.933 E0.01300 ; perimeter
G1 X52.688 Y77.604 E0.01361 ; perimeter
G1 X52.800 Y77.151 E0.01923 ; perimeter
G1 X53.002 Y76.734 E0.01907 ; perimeter
G1 X53.188 Y76.475 E0.01312 ; perimeter
G1 X54.079 Y75.413 E0.05715 ; perimeter
G1 X54.587 Y75.839 E0.02730 ; perimeter
G1 X53.828 Y76.743 E0.04865 ; perimeter
G1 X53.662 Y76.976 E0.01179 ; perimeter
G1 X53.497 Y77.312 E0.01540 ; perimeter
G1 X53.402 Y77.607 E0.01277 ; perimeter
G1 X53.307 Y78.355 E0.03107 ; perimeter
G1 X78.384 Y99.397 E1.34857 ; perimeter
G1 X112.776 Y99.397 E1.41680 ; perimeter
G1 X112.774 Y100.254 E0.03529 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X109.483 Y100.260 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.100 F10800.000 ; lift Z
G1 X53.727 Y78.191 ; move to first perimeter point
G1 Z7.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.528 Y99.001 E1.33372 ; perimeter
G1 X113.173 Y99.001 E1.42722 ; perimeter
G1 X113.170 Y100.710 E0.07041 ; perimeter
G1 X77.906 Y100.710 E1.45271 ; perimeter
G1 X52.608 Y79.483 E1.36046 ; perimeter
G1 X52.399 Y78.925 E0.02453 ; perimeter
G1 X52.330 Y78.636 E0.01223 ; perimeter
G1 X52.278 Y78.285 E0.01461 ; perimeter
G1 X52.264 Y77.924 E0.01489 ; perimeter
G1 X52.295 Y77.553 E0.01534 ; perimeter
G1 X52.330 Y77.353 E0.00836 ; perimeter
G1 X52.429 Y77.009 E0.01476 ; perimeter
G1 X52.660 Y76.531 E0.02188 ; perimeter
G1 X52.875 Y76.232 E0.01515 ; perimeter
G1 X54.031 Y74.854 E0.07409 ; perimeter
G1 X55.145 Y75.790 E0.05995 ; perimeter
G1 X54.142 Y76.986 E0.06434 ; perimeter
G1 X54.003 Y77.180 E0.00982 ; perimeter
G1 X53.865 Y77.461 E0.01288 ; perimeter
G1 X53.791 Y77.693 E0.01007 ; perimeter
G1 X53.735 Y78.131 E0.01818 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.526 Y78.536 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.253 Y80.251 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.100 F10800.000 ; lift Z
G1 X60.728 Y74.064 ; move to first perimeter point
G1 Z7.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.998 Y71.773 E0.14680 ; perimeter
G1 X55.549 Y74.692 E0.15696 ; perimeter
G1 X55.042 Y74.266 E0.02729 ; perimeter
G1 X64.039 Y63.544 E0.57663 ; perimeter
G1 X64.546 Y63.969 E0.02729 ; perimeter
G1 X62.097 Y66.888 E0.15696 ; perimeter
G1 X64.827 Y69.179 E0.14680 ; perimeter
G1 X64.483 Y69.589 E0.02205 ; perimeter
G1 X61.753 Y67.298 E0.14680 ; perimeter
G1 X58.342 Y71.363 E0.21861 ; perimeter
G1 X61.072 Y73.654 E0.14680 ; perimeter
G1 X60.766 Y74.018 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.777 Y74.622 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X58.047 Y72.332 E0.14680 ; perimeter
G1 X55.598 Y75.250 E0.15696 ; perimeter
G1 X54.483 Y74.315 E0.05995 ; perimeter
G1 X63.990 Y62.985 E0.60929 ; perimeter
G1 X65.105 Y63.921 E0.05995 ; perimeter
G1 X62.656 Y66.839 E0.15696 ; perimeter
G1 X65.386 Y69.130 E0.14680 ; perimeter
G1 X64.532 Y70.147 E0.05471 ; perimeter
G1 X61.802 Y67.856 E0.14680 ; perimeter
G1 X58.901 Y71.314 E0.18596 ; perimeter
G1 X61.630 Y73.605 E0.14680 ; perimeter
G1 X60.815 Y74.576 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.503 Y74.331 F10800.000 ; move inwards before travel
G1 F8640
G1 X58.259 Y72.503 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.100 F10800.000 ; lift Z
G1 X104.312 Y81.843 ; move to first perimeter point
G1 Z7.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.442 Y81.843 E0.36538 ; perimeter
G1 X86.727 Y74.530 E0.46869 ; perimeter
G1 X81.590 Y74.530 E0.21162 ; perimeter
G1 X67.007 Y62.293 E0.78423 ; perimeter
G1 X67.244 Y62.330 E0.00988 ; perimeter
G1 X81.635 Y74.406 E0.77392 ; perimeter
G1 X86.772 Y74.406 E0.21162 ; perimeter
G1 X95.488 Y81.719 E0.46869 ; perimeter
G1 X104.312 Y81.719 E0.36353 ; perimeter
G1 X104.312 Y81.783 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X101.021 Y81.805 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.100 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z7.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.847 Y76.826 E0.18544 ; perimeter
G1 X86.583 Y74.926 E0.12174 ; perimeter
G1 X81.446 Y74.926 E0.21162 ; perimeter
G1 X66.640 Y62.503 E0.79621 ; perimeter
G1 X66.128 Y62.628 E0.02174 ; perimeter
G1 X65.713 Y62.803 E0.01856 ; perimeter
G1 X65.584 Y62.886 E0.00630 ; perimeter
G1 X65.028 Y62.420 E0.02990 ; perimeter
G1 X65.339 Y62.201 E0.01567 ; perimeter
G1 X65.775 Y62.008 E0.01961 ; perimeter
G1 X66.094 Y61.924 E0.01361 ; perimeter
G1 X66.407 Y61.881 E0.01300 ; perimeter
G1 X66.722 Y61.873 E0.01301 ; perimeter
G1 X66.984 Y61.889 E0.01078 ; perimeter
G1 X67.427 Y61.967 E0.01856 ; perimeter
G1 X81.779 Y74.010 E0.77181 ; perimeter
G1 X86.916 Y74.010 E0.21162 ; perimeter
G1 X95.632 Y81.323 E0.46869 ; perimeter
G1 X104.708 Y81.323 E0.37391 ; perimeter
G1 X104.708 Y82.239 E0.03776 ; perimeter
G1 X95.298 Y82.239 E0.38765 ; perimeter
G1 X89.257 Y77.170 E0.32489 ; perimeter
G1 X76.588 Y92.268 E0.81192 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X88.288 Y76.875 E0.15279 ; perimeter
G1 X86.439 Y75.322 E0.09947 ; perimeter
G1 X81.302 Y75.322 E0.21162 ; perimeter
G1 X66.539 Y62.935 E0.79387 ; perimeter
G1 X66.252 Y63.006 E0.01217 ; perimeter
G1 X65.898 Y63.155 E0.01585 ; perimeter
G1 X65.694 Y63.287 E0.01001 ; perimeter
G1 X65.576 Y63.397 E0.00665 ; perimeter
G1 X64.442 Y62.446 E0.06098 ; perimeter
G1 X64.718 Y62.162 E0.01630 ; perimeter
G1 X65.140 Y61.858 E0.02144 ; perimeter
G1 X65.465 Y61.699 E0.01490 ; perimeter
G1 X65.656 Y61.630 E0.00836 ; perimeter
G1 X66.016 Y61.535 E0.01534 ; perimeter
G1 X66.374 Y61.486 E0.01489 ; perimeter
G1 X66.729 Y61.476 E0.01461 ; perimeter
G1 X67.025 Y61.494 E0.01223 ; perimeter
G1 X67.611 Y61.603 E0.02453 ; perimeter
G1 X81.924 Y73.613 E0.76971 ; perimeter
G1 X87.061 Y73.613 E0.21162 ; perimeter
G1 X95.776 Y80.926 E0.46869 ; perimeter
G1 X105.105 Y80.926 E0.38430 ; perimeter
G1 X105.105 Y82.636 E0.07041 ; perimeter
G1 X95.154 Y82.636 E0.40992 ; perimeter
G1 X89.306 Y77.728 E0.31451 ; perimeter
G1 X76.637 Y92.826 E0.81192 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.509 Y92.482 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.100 F10800.000 ; lift Z
G1 X145.688 Y81.843 ; move to first perimeter point
G1 Z7.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X145.688 Y81.719 E0.00510 ; perimeter
G1 X154.512 Y81.719 E0.36353 ; perimeter
G1 X163.228 Y74.406 E0.46869 ; perimeter
G1 X168.365 Y74.406 E0.21162 ; perimeter
G1 X182.756 Y62.330 E0.77392 ; perimeter
G1 X182.993 Y62.293 E0.00988 ; perimeter
G1 X168.410 Y74.530 E0.78423 ; perimeter
G1 X163.273 Y74.530 E0.21162 ; perimeter
G1 X154.558 Y81.843 E0.46869 ; perimeter
G1 X145.748 Y81.843 E0.36291 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X145.688 Y81.719 E-0.03178 ; wipe and retract
G1 X148.842 Y81.719 E-0.72822 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.100 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z7.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.743 Y77.170 E0.81439 ; perimeter
G1 X154.702 Y82.239 E0.32489 ; perimeter
G1 X145.292 Y82.239 E0.38765 ; perimeter
G1 X145.292 Y81.323 E0.03776 ; perimeter
G1 X154.368 Y81.323 E0.37391 ; perimeter
G1 X163.084 Y74.010 E0.46869 ; perimeter
G1 X168.221 Y74.010 E0.21162 ; perimeter
G1 X182.573 Y61.967 E0.77181 ; perimeter
G1 X183.016 Y61.889 E0.01856 ; perimeter
G1 X183.278 Y61.873 E0.01078 ; perimeter
G1 X183.593 Y61.881 E0.01301 ; perimeter
G1 X183.906 Y61.924 E0.01300 ; perimeter
M73 Q37 S87
G1 X184.225 Y62.008 E0.01361 ; perimeter
G1 X184.652 Y62.197 E0.01923 ; perimeter
G1 X184.967 Y62.424 E0.01597 ; perimeter
G1 X184.416 Y62.886 E0.02960 ; perimeter
G1 X184.287 Y62.803 E0.00630 ; perimeter
G1 X183.872 Y62.628 E0.01856 ; perimeter
G1 X183.360 Y62.503 E0.02174 ; perimeter
G1 X168.554 Y74.926 E0.79620 ; perimeter
G1 X163.417 Y74.926 E0.21162 ; perimeter
G1 X161.153 Y76.826 E0.12174 ; perimeter
G1 X164.047 Y80.274 E0.18544 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.694 Y77.728 E0.81439 ; perimeter
G1 X154.846 Y82.636 E0.31451 ; perimeter
G1 X144.895 Y82.636 E0.40992 ; perimeter
G1 X144.895 Y80.926 E0.07041 ; perimeter
G1 X154.224 Y80.926 E0.38430 ; perimeter
G1 X162.939 Y73.613 E0.46869 ; perimeter
G1 X168.076 Y73.613 E0.21162 ; perimeter
G1 X182.389 Y61.603 E0.76971 ; perimeter
G1 X182.975 Y61.494 E0.02453 ; perimeter
G1 X183.271 Y61.476 E0.01223 ; perimeter
G1 X183.626 Y61.486 E0.01461 ; perimeter
G1 X183.984 Y61.535 E0.01489 ; perimeter
G1 X184.344 Y61.630 E0.01534 ; perimeter
G1 X184.535 Y61.699 E0.00836 ; perimeter
G1 X184.857 Y61.856 E0.01476 ; perimeter
G1 X185.285 Y62.165 E0.02174 ; perimeter
G1 X185.549 Y62.453 E0.01610 ; perimeter
G1 X184.424 Y63.397 E0.06054 ; perimeter
G1 X184.306 Y63.287 E0.00665 ; perimeter
G1 X184.102 Y63.155 E0.01001 ; perimeter
G1 X183.747 Y63.006 E0.01585 ; perimeter
G1 X183.461 Y62.935 E0.01217 ; perimeter
G1 X168.698 Y75.322 E0.79387 ; perimeter
G1 X163.561 Y75.322 E0.21162 ; perimeter
G1 X161.712 Y76.875 E0.09947 ; perimeter
G1 X164.096 Y79.716 E0.15279 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.100 F10800.000 ; lift Z
G1 X189.272 Y74.064 ; move to first perimeter point
G1 Z7.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X188.928 Y73.654 E0.02205 ; perimeter
G1 X191.658 Y71.363 E0.14680 ; perimeter
G1 X188.247 Y67.298 E0.21861 ; perimeter
G1 X185.517 Y69.589 E0.14680 ; perimeter
G1 X185.173 Y69.179 E0.02205 ; perimeter
G1 X187.903 Y66.888 E0.14680 ; perimeter
G1 X185.454 Y63.969 E0.15696 ; perimeter
G1 X185.961 Y63.544 E0.02729 ; perimeter
G1 X194.958 Y74.266 E0.57663 ; perimeter
G1 X194.451 Y74.692 E0.02729 ; perimeter
G1 X192.002 Y71.773 E0.15696 ; perimeter
G1 X189.318 Y74.025 E0.14433 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.223 Y74.622 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X188.370 Y73.605 E0.05471 ; perimeter
G1 X191.099 Y71.314 E0.14680 ; perimeter
G1 X188.198 Y67.856 E0.18596 ; perimeter
G1 X185.468 Y70.147 E0.14680 ; perimeter
G1 X184.614 Y69.130 E0.05471 ; perimeter
G1 X187.344 Y66.839 E0.14680 ; perimeter
G1 X184.895 Y63.921 E0.15696 ; perimeter
G1 X186.010 Y62.985 E0.05995 ; perimeter
G1 X195.517 Y74.315 E0.60929 ; perimeter
G1 X194.402 Y75.250 E0.05995 ; perimeter
G1 X191.953 Y72.332 E0.15696 ; perimeter
G1 X189.269 Y74.584 E0.14433 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.263 Y74.224 F10800.000 ; move inwards before travel
G1 F8640
G1 X188.370 Y73.605 E-0.30695 ; wipe and retract
G1 X189.873 Y72.344 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.100 F10800.000 ; lift Z
G1 X137.621 Y99.918 ; move to first perimeter point
G1 Z7.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X137.621 Y99.794 E0.00510 ; perimeter
G1 X171.760 Y99.794 E1.40638 ; perimeter
G1 X196.817 Y78.768 E1.34750 ; perimeter
G1 X196.740 Y78.995 E0.00988 ; perimeter
G1 X171.805 Y99.918 E1.34089 ; perimeter
G1 X137.681 Y99.918 E1.40576 ; perimeter
M204 S1000 ; adjust acceleration
G1 X137.226 Y100.314 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X137.224 Y99.397 E0.03776 ; perimeter
G1 X171.616 Y99.397 E1.41680 ; perimeter
G1 X196.675 Y78.371 E1.34758 ; perimeter
G1 X196.640 Y77.844 E0.02174 ; perimeter
G1 X196.540 Y77.405 E0.01856 ; perimeter
G1 X196.424 Y77.130 E0.01228 ; perimeter
G1 X196.286 Y76.894 E0.01128 ; perimeter
G1 X195.411 Y75.840 E0.05641 ; perimeter
G1 X195.921 Y75.413 E0.02742 ; perimeter
G1 X196.812 Y76.475 E0.05715 ; perimeter
G1 X197.002 Y76.740 E0.01343 ; perimeter
G1 X197.139 Y77.006 E0.01233 ; perimeter
G1 X197.281 Y77.432 E0.01849 ; perimeter
G1 X197.340 Y77.928 E0.02057 ; perimeter
G1 X197.327 Y78.249 E0.01322 ; perimeter
G1 X197.281 Y78.561 E0.01301 ; perimeter
G1 X197.220 Y78.815 E0.01079 ; perimeter
G1 X197.066 Y79.239 E0.01856 ; perimeter
G1 X171.950 Y100.314 E1.35068 ; perimeter
G1 X137.286 Y100.314 E1.42800 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X137.224 Y99.397 E-0.21212 ; wipe and retract
G1 X139.597 Y99.397 E-0.54788 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.100 F10800.000 ; lift Z
G1 X136.827 Y99.001 ; move to first perimeter point
G1 Z7.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.472 Y99.001 E1.42722 ; perimeter
G1 X196.266 Y78.196 E1.33336 ; perimeter
G1 X196.247 Y77.902 E0.01217 ; perimeter
G1 X196.161 Y77.527 E0.01585 ; perimeter
G1 X196.069 Y77.308 E0.00977 ; perimeter
G1 X195.960 Y77.122 E0.00886 ; perimeter
G1 X194.854 Y75.790 E0.07133 ; perimeter
G1 X195.969 Y74.854 E0.06000 ; perimeter
G1 X197.125 Y76.232 E0.07409 ; perimeter
G1 X197.341 Y76.533 E0.01526 ; perimeter
G1 X197.504 Y76.849 E0.01464 ; perimeter
G1 X197.669 Y77.349 E0.02171 ; perimeter
G1 X197.736 Y77.922 E0.02376 ; perimeter
G1 X197.722 Y78.285 E0.01497 ; perimeter
G1 X197.670 Y78.636 E0.01461 ; perimeter
G1 X197.601 Y78.925 E0.01223 ; perimeter
G1 X197.392 Y79.483 E0.02453 ; perimeter
G1 X172.094 Y100.710 E1.36046 ; perimeter
G1 X136.830 Y100.710 E1.45271 ; perimeter
G1 X136.827 Y99.061 E0.06794 ; perimeter
M204 S1000 ; adjust acceleration
G1 X137.227 Y99.007 F10800.000 ; move inwards before travel
G1 F8640
G1 X140.119 Y99.055 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.100 F10800.000 ; lift Z
G1 X112.093 Y138.064 ; move to first perimeter point
G1 Z7.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X77.909 Y138.064 E1.40823 ; perimeter
G1 X52.975 Y117.141 E1.34089 ; perimeter
G1 X52.898 Y116.915 E0.00988 ; perimeter
G1 X77.955 Y137.940 E1.34750 ; perimeter
G1 X112.094 Y137.940 E1.40638 ; perimeter
G1 X112.093 Y138.004 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 X112.489 Y138.460 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X77.765 Y138.460 E1.43047 ; perimeter
G1 X52.649 Y117.385 E1.35068 ; perimeter
G1 X52.495 Y116.962 E0.01856 ; perimeter
G1 X52.388 Y116.395 E0.02377 ; perimeter
G1 X52.376 Y116.079 E0.01300 ; perimeter
G1 X52.403 Y115.750 E0.01361 ; perimeter
G1 X52.515 Y115.297 E0.01923 ; perimeter
G1 X52.717 Y114.880 E0.01907 ; perimeter
G1 X52.903 Y114.621 E0.01312 ; perimeter
G1 X53.794 Y113.559 E0.05715 ; perimeter
G1 X54.302 Y113.985 E0.02730 ; perimeter
G1 X53.543 Y114.889 E0.04865 ; perimeter
G1 X53.376 Y115.122 E0.01179 ; perimeter
G1 X53.212 Y115.458 E0.01540 ; perimeter
G1 X53.117 Y115.753 E0.01277 ; perimeter
G1 X53.022 Y116.501 E0.03107 ; perimeter
G1 X78.099 Y137.544 E1.34857 ; perimeter
G1 X112.491 Y137.544 E1.41680 ; perimeter
G1 X112.489 Y138.400 E0.03529 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X109.198 Y138.406 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.100 F10800.000 ; lift Z
G1 X53.442 Y116.337 ; move to first perimeter point
G1 Z7.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.243 Y137.147 E1.33372 ; perimeter
G1 X112.888 Y137.147 E1.42722 ; perimeter
G1 X112.884 Y138.856 E0.07041 ; perimeter
G1 X77.621 Y138.856 E1.45271 ; perimeter
G1 X52.323 Y117.629 E1.36046 ; perimeter
G1 X52.114 Y117.071 E0.02453 ; perimeter
G1 X52.045 Y116.782 E0.01223 ; perimeter
G1 X51.992 Y116.432 E0.01461 ; perimeter
G1 X51.979 Y116.070 E0.01489 ; perimeter
G1 X52.010 Y115.699 E0.01534 ; perimeter
G1 X52.045 Y115.499 E0.00836 ; perimeter
G1 X52.144 Y115.155 E0.01476 ; perimeter
G1 X52.375 Y114.677 E0.02188 ; perimeter
G1 X52.589 Y114.378 E0.01515 ; perimeter
G1 X53.745 Y113.000 E0.07409 ; perimeter
G1 X54.860 Y113.936 E0.05995 ; perimeter
G1 X53.856 Y115.132 E0.06434 ; perimeter
G1 X53.718 Y115.326 E0.00982 ; perimeter
G1 X53.580 Y115.607 E0.01288 ; perimeter
G1 X53.505 Y115.839 E0.01007 ; perimeter
G1 X53.450 Y116.277 E0.01818 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.241 Y116.682 F10800.000 ; move inwards before travel
G1 F8640
G1 X55.968 Y118.397 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.100 F10800.000 ; lift Z
G1 X60.443 Y112.210 ; move to first perimeter point
G1 Z7.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.713 Y109.919 E0.14680 ; perimeter
G1 X55.264 Y112.838 E0.15696 ; perimeter
G1 X54.756 Y112.412 E0.02729 ; perimeter
G1 X63.754 Y101.690 E0.57663 ; perimeter
G1 X64.261 Y102.116 E0.02729 ; perimeter
G1 X61.812 Y105.034 E0.15696 ; perimeter
G1 X64.542 Y107.325 E0.14680 ; perimeter
G1 X64.198 Y107.735 E0.02205 ; perimeter
G1 X61.468 Y105.444 E0.14680 ; perimeter
G1 X58.057 Y109.509 E0.21861 ; perimeter
G1 X60.787 Y111.800 E0.14680 ; perimeter
G1 X60.481 Y112.164 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.492 Y112.768 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X57.762 Y110.478 E0.14680 ; perimeter
G1 X55.313 Y113.396 E0.15696 ; perimeter
G1 X54.198 Y112.461 E0.05995 ; perimeter
G1 X63.705 Y101.131 E0.60929 ; perimeter
G1 X64.820 Y102.067 E0.05995 ; perimeter
G1 X62.371 Y104.985 E0.15696 ; perimeter
G1 X65.100 Y107.276 E0.14680 ; perimeter
G1 X64.247 Y108.293 E0.05471 ; perimeter
G1 X61.517 Y106.003 E0.14680 ; perimeter
G1 X58.615 Y109.461 E0.18596 ; perimeter
G1 X61.345 Y111.751 E0.14680 ; perimeter
G1 X60.530 Y112.722 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.218 Y112.477 F10800.000 ; move inwards before travel
G1 F8640
G1 X57.973 Y110.650 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.100 F10800.000 ; lift Z
G1 X104.027 Y119.989 ; move to first perimeter point
G1 Z7.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.157 Y119.989 E0.36538 ; perimeter
G1 X86.442 Y112.676 E0.46869 ; perimeter
G1 X81.305 Y112.676 E0.21162 ; perimeter
G1 X66.722 Y100.439 E0.78423 ; perimeter
G1 X66.959 Y100.476 E0.00988 ; perimeter
G1 X81.350 Y112.552 E0.77392 ; perimeter
G1 X86.487 Y112.552 E0.21162 ; perimeter
G1 X95.202 Y119.865 E0.46869 ; perimeter
G1 X104.027 Y119.865 E0.36353 ; perimeter
G1 X104.027 Y119.929 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X100.735 Y119.951 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.100 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z7.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
M73 P37 R85
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.562 Y114.972 E0.18544 ; perimeter
G1 X86.298 Y113.072 E0.12174 ; perimeter
G1 X81.161 Y113.072 E0.21162 ; perimeter
G1 X66.355 Y100.649 E0.79621 ; perimeter
G1 X65.842 Y100.774 E0.02174 ; perimeter
G1 X65.427 Y100.949 E0.01856 ; perimeter
G1 X65.299 Y101.032 E0.00630 ; perimeter
G1 X64.743 Y100.566 E0.02990 ; perimeter
G1 X65.054 Y100.348 E0.01567 ; perimeter
G1 X65.489 Y100.155 E0.01961 ; perimeter
G1 X65.809 Y100.070 E0.01361 ; perimeter
G1 X66.121 Y100.027 E0.01300 ; perimeter
G1 X66.437 Y100.019 E0.01301 ; perimeter
G1 X66.698 Y100.035 E0.01078 ; perimeter
G1 X67.142 Y100.113 E0.01856 ; perimeter
G1 X81.494 Y112.156 E0.77181 ; perimeter
G1 X86.631 Y112.156 E0.21162 ; perimeter
G1 X95.347 Y119.469 E0.46869 ; perimeter
G1 X104.423 Y119.469 E0.37391 ; perimeter
G1 X104.423 Y120.385 E0.03776 ; perimeter
G1 X95.013 Y120.385 E0.38765 ; perimeter
G1 X88.972 Y115.316 E0.32489 ; perimeter
G1 X76.303 Y130.414 E0.81192 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X88.003 Y115.021 E0.15279 ; perimeter
G1 X86.153 Y113.469 E0.09947 ; perimeter
G1 X81.016 Y113.469 E0.21162 ; perimeter
G1 X66.254 Y101.082 E0.79387 ; perimeter
G1 X65.967 Y101.152 E0.01217 ; perimeter
G1 X65.613 Y101.301 E0.01585 ; perimeter
G1 X65.409 Y101.433 E0.01001 ; perimeter
G1 X65.291 Y101.543 E0.00665 ; perimeter
G1 X64.157 Y100.592 E0.06098 ; perimeter
G1 X64.433 Y100.308 E0.01630 ; perimeter
G1 X64.855 Y100.004 E0.02144 ; perimeter
G1 X65.180 Y99.845 E0.01490 ; perimeter
G1 X65.371 Y99.776 E0.00836 ; perimeter
G1 X65.731 Y99.681 E0.01534 ; perimeter
G1 X66.089 Y99.632 E0.01489 ; perimeter
G1 X66.444 Y99.622 E0.01461 ; perimeter
G1 X66.740 Y99.640 E0.01223 ; perimeter
G1 X67.326 Y99.749 E0.02453 ; perimeter
G1 X81.639 Y111.759 E0.76971 ; perimeter
G1 X86.776 Y111.759 E0.21162 ; perimeter
G1 X95.491 Y119.072 E0.46869 ; perimeter
G1 X104.819 Y119.072 E0.38430 ; perimeter
G1 X104.819 Y120.782 E0.07041 ; perimeter
G1 X94.869 Y120.782 E0.40992 ; perimeter
G1 X89.020 Y115.874 E0.31451 ; perimeter
G1 X76.352 Y130.972 E0.81192 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.224 Y130.628 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.100 F10800.000 ; lift Z
G1 X145.403 Y119.989 ; move to first perimeter point
G1 Z7.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X145.403 Y119.865 E0.00510 ; perimeter
G1 X154.227 Y119.865 E0.36353 ; perimeter
G1 X162.943 Y112.552 E0.46869 ; perimeter
G1 X168.080 Y112.552 E0.21162 ; perimeter
G1 X182.471 Y100.476 E0.77392 ; perimeter
G1 X182.708 Y100.439 E0.00988 ; perimeter
G1 X168.125 Y112.676 E0.78423 ; perimeter
G1 X162.988 Y112.676 E0.21162 ; perimeter
G1 X154.272 Y119.989 E0.46869 ; perimeter
G1 X145.463 Y119.989 E0.36291 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X145.403 Y119.865 E-0.03178 ; wipe and retract
G1 X148.557 Y119.865 E-0.72822 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.100 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z7.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.458 Y115.316 E0.81439 ; perimeter
G1 X154.417 Y120.385 E0.32489 ; perimeter
G1 X145.007 Y120.385 E0.38765 ; perimeter
G1 X145.007 Y119.469 E0.03776 ; perimeter
G1 X154.083 Y119.469 E0.37391 ; perimeter
G1 X162.798 Y112.156 E0.46869 ; perimeter
G1 X167.935 Y112.156 E0.21162 ; perimeter
G1 X182.287 Y100.113 E0.77181 ; perimeter
G1 X182.731 Y100.035 E0.01856 ; perimeter
G1 X182.993 Y100.019 E0.01078 ; perimeter
G1 X183.308 Y100.027 E0.01301 ; perimeter
G1 X183.621 Y100.070 E0.01300 ; perimeter
G1 X183.940 Y100.155 E0.01361 ; perimeter
G1 X184.367 Y100.344 E0.01923 ; perimeter
G1 X184.681 Y100.570 E0.01597 ; perimeter
G1 X184.131 Y101.032 E0.02960 ; perimeter
G1 X184.002 Y100.949 E0.00630 ; perimeter
G1 X183.587 Y100.774 E0.01856 ; perimeter
G1 X183.075 Y100.649 E0.02174 ; perimeter
G1 X168.269 Y113.072 E0.79620 ; perimeter
G1 X163.132 Y113.072 E0.21162 ; perimeter
G1 X160.868 Y114.972 E0.12174 ; perimeter
G1 X163.762 Y118.420 E0.18544 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.409 Y115.874 E0.81439 ; perimeter
G1 X154.561 Y120.782 E0.31451 ; perimeter
G1 X144.610 Y120.782 E0.40992 ; perimeter
G1 X144.610 Y119.072 E0.07041 ; perimeter
G1 X153.939 Y119.072 E0.38430 ; perimeter
G1 X162.654 Y111.759 E0.46869 ; perimeter
G1 X167.791 Y111.759 E0.21162 ; perimeter
G1 X182.104 Y99.749 E0.76971 ; perimeter
G1 X182.689 Y99.640 E0.02453 ; perimeter
G1 X182.986 Y99.622 E0.01223 ; perimeter
G1 X183.340 Y99.632 E0.01461 ; perimeter
G1 X183.699 Y99.681 E0.01489 ; perimeter
G1 X184.059 Y99.776 E0.01534 ; perimeter
G1 X184.250 Y99.845 E0.00836 ; perimeter
G1 X184.572 Y100.002 E0.01476 ; perimeter
G1 X184.999 Y100.311 E0.02174 ; perimeter
G1 X185.264 Y100.599 E0.01610 ; perimeter
G1 X184.138 Y101.543 E0.06054 ; perimeter
G1 X184.021 Y101.433 E0.00665 ; perimeter
G1 X183.817 Y101.301 E0.01001 ; perimeter
G1 X183.462 Y101.152 E0.01585 ; perimeter
G1 X183.175 Y101.082 E0.01217 ; perimeter
G1 X168.413 Y113.469 E0.79387 ; perimeter
G1 X163.276 Y113.469 E0.21162 ; perimeter
G1 X161.426 Y115.021 E0.09947 ; perimeter
G1 X163.810 Y117.862 E0.15279 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.100 F10800.000 ; lift Z
G1 X188.987 Y112.210 ; move to first perimeter point
G1 Z7.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X188.643 Y111.800 E0.02205 ; perimeter
G1 X191.373 Y109.509 E0.14680 ; perimeter
G1 X187.962 Y105.444 E0.21861 ; perimeter
G1 X185.232 Y107.735 E0.14680 ; perimeter
G1 X184.888 Y107.325 E0.02205 ; perimeter
G1 X187.617 Y105.034 E0.14680 ; perimeter
G1 X185.168 Y102.116 E0.15696 ; perimeter
G1 X185.676 Y101.690 E0.02729 ; perimeter
G1 X194.673 Y112.412 E0.57663 ; perimeter
G1 X194.166 Y112.838 E0.02729 ; perimeter
G1 X191.717 Y109.919 E0.15696 ; perimeter
G1 X189.033 Y112.171 E0.14433 ; perimeter
M204 S1000 ; adjust acceleration
G1 X188.938 Y112.768 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X188.084 Y111.751 E0.05471 ; perimeter
G1 X190.814 Y109.461 E0.14680 ; perimeter
G1 X187.913 Y106.003 E0.18596 ; perimeter
G1 X185.183 Y108.293 E0.14680 ; perimeter
G1 X184.329 Y107.276 E0.05471 ; perimeter
G1 X187.059 Y104.985 E0.14680 ; perimeter
G1 X184.610 Y102.067 E0.15696 ; perimeter
G1 X185.725 Y101.131 E0.05995 ; perimeter
G1 X195.232 Y112.461 E0.60929 ; perimeter
G1 X194.117 Y113.396 E0.05995 ; perimeter
G1 X191.668 Y110.478 E0.15696 ; perimeter
G1 X188.984 Y112.730 E0.14433 ; perimeter
M204 S1000 ; adjust acceleration
G1 X188.977 Y112.370 F10800.000 ; move inwards before travel
G1 F8640
G1 X188.084 Y111.751 E-0.30695 ; wipe and retract
G1 X189.587 Y110.490 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.100 F10800.000 ; lift Z
G1 X137.336 Y138.064 ; move to first perimeter point
G1 Z7.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X137.336 Y137.940 E0.00510 ; perimeter
G1 X171.475 Y137.940 E1.40638 ; perimeter
G1 X196.532 Y116.915 E1.34750 ; perimeter
G1 X196.454 Y117.141 E0.00988 ; perimeter
G1 X171.520 Y138.064 E1.34089 ; perimeter
G1 X137.396 Y138.064 E1.40576 ; perimeter
M204 S1000 ; adjust acceleration
G1 X136.941 Y138.460 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X136.939 Y137.544 E0.03776 ; perimeter
G1 X171.331 Y137.544 E1.41680 ; perimeter
G1 X196.389 Y116.517 E1.34758 ; perimeter
G1 X196.355 Y115.990 E0.02174 ; perimeter
G1 X196.254 Y115.551 E0.01856 ; perimeter
G1 X196.139 Y115.276 E0.01228 ; perimeter
G1 X196.000 Y115.040 E0.01128 ; perimeter
G1 X195.125 Y113.987 E0.05641 ; perimeter
G1 X195.635 Y113.559 E0.02742 ; perimeter
G1 X196.527 Y114.621 E0.05715 ; perimeter
G1 X196.717 Y114.886 E0.01343 ; perimeter
G1 X196.854 Y115.152 E0.01233 ; perimeter
G1 X196.996 Y115.578 E0.01849 ; perimeter
G1 X197.054 Y116.074 E0.02057 ; perimeter
G1 X197.042 Y116.395 E0.01322 ; perimeter
G1 X196.995 Y116.707 E0.01301 ; perimeter
G1 X196.935 Y116.962 E0.01079 ; perimeter
G1 X196.781 Y117.385 E0.01856 ; perimeter
G1 X171.664 Y138.460 E1.35068 ; perimeter
G1 X137.001 Y138.460 E1.42800 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X136.939 Y137.544 E-0.21212 ; wipe and retract
G1 X139.312 Y137.544 E-0.54788 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.100 F10800.000 ; lift Z
G1 X136.542 Y137.147 ; move to first perimeter point
G1 Z7.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.187 Y137.147 E1.42722 ; perimeter
G1 X195.981 Y116.342 E1.33336 ; perimeter
M73 Q37 S86
G1 X195.961 Y116.048 E0.01217 ; perimeter
G1 X195.876 Y115.673 E0.01585 ; perimeter
G1 X195.784 Y115.454 E0.00977 ; perimeter
G1 X195.675 Y115.268 E0.00886 ; perimeter
G1 X194.569 Y113.937 E0.07133 ; perimeter
G1 X195.684 Y113.000 E0.06000 ; perimeter
G1 X196.840 Y114.378 E0.07409 ; perimeter
G1 X197.056 Y114.679 E0.01526 ; perimeter
G1 X197.219 Y114.995 E0.01464 ; perimeter
G1 X197.384 Y115.496 E0.02171 ; perimeter
G1 X197.451 Y116.068 E0.02376 ; perimeter
G1 X197.437 Y116.432 E0.01497 ; perimeter
G1 X197.385 Y116.782 E0.01461 ; perimeter
G1 X197.316 Y117.071 E0.01223 ; perimeter
G1 X197.107 Y117.629 E0.02453 ; perimeter
G1 X171.809 Y138.856 E1.36046 ; perimeter
G1 X136.545 Y138.856 E1.45271 ; perimeter
G1 X136.542 Y137.207 E0.06794 ; perimeter
M204 S1000 ; adjust acceleration
G1 X136.942 Y137.154 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;7.75


G1 F8640
G1 X139.833 Y137.201 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;7.75
G1 X138.392 Y100.093 ; move to first perimeter point
G1 Z7.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X138.392 Y99.969 E0.00510 ; perimeter
G1 X171.824 Y99.969 E1.37725 ; perimeter
G1 X196.826 Y78.990 E1.34452 ; perimeter
G1 X196.689 Y79.267 E0.01272 ; perimeter
G1 X171.869 Y100.093 E1.33472 ; perimeter
G1 X138.452 Y100.093 E1.37663 ; perimeter
M204 S1000 ; adjust acceleration
G1 X137.996 Y100.489 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X137.996 Y99.572 E0.03776 ; perimeter
G1 X171.680 Y99.572 E1.38765 ; perimeter
G1 X196.766 Y78.523 E1.34906 ; perimeter
G1 X196.792 Y77.970 E0.02281 ; perimeter
G1 X196.730 Y77.486 E0.02007 ; perimeter
G1 X196.630 Y77.184 E0.01312 ; perimeter
G1 X196.477 Y76.872 E0.01433 ; perimeter
G1 X196.307 Y76.631 E0.01212 ; perimeter
G1 X195.547 Y75.726 E0.04869 ; perimeter
G1 X196.055 Y75.300 E0.02729 ; perimeter
G1 X196.946 Y76.363 E0.05713 ; perimeter
G1 X197.134 Y76.625 E0.01332 ; perimeter
G1 X197.333 Y77.037 E0.01883 ; perimeter
G1 X197.413 Y77.317 E0.01200 ; perimeter
G1 X197.473 Y77.828 E0.02119 ; perimeter
G1 X197.461 Y78.139 E0.01284 ; perimeter
G1 X197.355 Y78.698 E0.02343 ; perimeter
G1 X197.248 Y79.016 E0.01380 ; perimeter
G1 X197.000 Y79.523 E0.02327 ; perimeter
G1 X172.013 Y100.489 E1.34370 ; perimeter
G1 X138.056 Y100.489 E1.39889 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X137.996 Y99.572 E-0.21210 ; wipe and retract
G1 X140.368 Y99.572 E-0.54790 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.350 F10800.000 ; lift Z
G1 X137.599 Y99.176 ; move to first perimeter point
G1 Z7.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.535 Y99.176 E1.39804 ; perimeter
G1 X196.378 Y78.331 E1.33597 ; perimeter
G1 X196.395 Y77.985 E0.01424 ; perimeter
G1 X196.342 Y77.574 E0.01707 ; perimeter
G1 X196.263 Y77.334 E0.01043 ; perimeter
G1 X196.135 Y77.075 E0.01190 ; perimeter
G1 X195.993 Y76.874 E0.01015 ; perimeter
G1 X194.989 Y75.677 E0.06436 ; perimeter
G1 X196.103 Y74.742 E0.05995 ; perimeter
G1 X197.259 Y76.119 E0.07409 ; perimeter
G1 X197.476 Y76.422 E0.01535 ; perimeter
G1 X197.705 Y76.895 E0.02164 ; perimeter
G1 X197.803 Y77.239 E0.01474 ; perimeter
G1 X197.870 Y77.813 E0.02379 ; perimeter
G1 X197.856 Y78.177 E0.01502 ; perimeter
G1 X197.801 Y78.536 E0.01495 ; perimeter
G1 X197.736 Y78.808 E0.01153 ; perimeter
G1 X197.618 Y79.160 E0.01530 ; perimeter
G1 X197.471 Y79.490 E0.01490 ; perimeter
G1 X197.311 Y79.779 E0.01360 ; perimeter
G1 X172.158 Y100.885 E1.35268 ; perimeter
G1 X137.600 Y100.885 E1.42362 ; perimeter
G1 X137.599 Y99.236 E0.06794 ; perimeter
M204 S1000 ; adjust acceleration
G1 X137.999 Y99.183 F10800.000 ; move inwards before travel
G1 F8640
G1 X140.890 Y99.230 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.350 F10800.000 ; lift Z
G1 X189.411 Y73.947 ; move to first perimeter point
G1 Z7.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X189.067 Y73.537 E0.02205 ; perimeter
G1 X191.792 Y71.251 E0.14653 ; perimeter
G1 X188.381 Y67.186 E0.21861 ; perimeter
G1 X185.656 Y69.472 E0.14653 ; perimeter
G1 X185.312 Y69.062 E0.02205 ; perimeter
G1 X188.037 Y66.776 E0.14653 ; perimeter
G1 X185.588 Y63.857 E0.15696 ; perimeter
G1 X186.095 Y63.431 E0.02730 ; perimeter
G1 X195.093 Y74.154 E0.57663 ; perimeter
G1 X194.585 Y74.579 E0.02729 ; perimeter
G1 X192.136 Y71.661 E0.15696 ; perimeter
G1 X189.457 Y73.909 E0.14406 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.362 Y74.506 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X188.509 Y73.488 E0.05471 ; perimeter
G1 X191.234 Y71.202 E0.14653 ; perimeter
G1 X188.332 Y67.744 E0.18596 ; perimeter
G1 X185.607 Y70.030 E0.14653 ; perimeter
G1 X184.754 Y69.013 E0.05471 ; perimeter
G1 X187.478 Y66.727 E0.14653 ; perimeter
G1 X185.029 Y63.808 E0.15696 ; perimeter
G1 X186.144 Y62.873 E0.05995 ; perimeter
G1 X195.651 Y74.202 E0.60929 ; perimeter
G1 X194.536 Y75.138 E0.05995 ; perimeter
G1 X192.087 Y72.219 E0.15696 ; perimeter
G1 X189.408 Y74.467 E0.14406 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.402 Y74.107 F10800.000 ; move inwards before travel
G1 F8640
G1 X188.509 Y73.488 E-0.30695 ; wipe and retract
G1 X190.012 Y72.227 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.350 F10800.000 ; lift Z
G1 X145.938 Y81.668 ; move to first perimeter point
G1 Z7.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X145.938 Y81.544 E0.00510 ; perimeter
G1 X154.449 Y81.544 E0.35060 ; perimeter
G1 X163.164 Y74.231 E0.46869 ; perimeter
G1 X168.301 Y74.231 E0.21162 ; perimeter
G1 X182.480 Y62.333 E0.76249 ; perimeter
G1 X182.776 Y62.246 E0.01272 ; perimeter
G1 X168.346 Y74.355 E0.77601 ; perimeter
G1 X163.209 Y74.355 E0.21162 ; perimeter
G1 X154.494 Y81.668 E0.46869 ; perimeter
G1 X145.998 Y81.668 E0.34999 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X145.938 Y81.544 E-0.03178 ; wipe and retract
G1 X149.092 Y81.544 E-0.72822 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.350 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z7.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.631 Y77.036 E0.82160 ; perimeter
G1 X154.638 Y82.064 E0.32227 ; perimeter
G1 X145.542 Y82.064 E0.37473 ; perimeter
G1 X145.542 Y81.148 E0.03776 ; perimeter
G1 X154.304 Y81.148 E0.36099 ; perimeter
G1 X163.020 Y73.834 E0.46869 ; perimeter
G1 X168.157 Y73.834 E0.21162 ; perimeter
G1 X182.282 Y61.982 E0.75959 ; perimeter
G1 X182.824 Y61.826 E0.02327 ; perimeter
G1 X183.155 Y61.776 E0.01380 ; perimeter
G1 X183.400 Y61.761 E0.01010 ; perimeter
G1 X183.724 Y61.769 E0.01334 ; perimeter
G1 X184.042 Y61.812 E0.01323 ; perimeter
G1 X184.368 Y61.899 E0.01387 ; perimeter
G1 X184.788 Y62.086 E0.01895 ; perimeter
G1 X185.101 Y62.312 E0.01591 ; perimeter
G1 X184.547 Y62.777 E0.02980 ; perimeter
G1 X184.250 Y62.604 E0.01413 ; perimeter
G1 X183.775 Y62.457 E0.02049 ; perimeter
G1 X183.226 Y62.386 E0.02281 ; perimeter
G1 X168.490 Y74.751 E0.79244 ; perimeter
G1 X163.353 Y74.751 E0.21162 ; perimeter
G1 X161.041 Y76.692 E0.12437 ; perimeter
G1 X164.047 Y80.274 E0.19265 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.582 Y77.594 E0.82160 ; perimeter
G1 X154.782 Y82.460 E0.31188 ; perimeter
G1 X145.145 Y82.460 E0.39700 ; perimeter
G1 X145.145 Y80.751 E0.07041 ; perimeter
G1 X154.160 Y80.751 E0.37137 ; perimeter
G1 X162.876 Y73.438 E0.46869 ; perimeter
G1 X168.013 Y73.438 E0.21162 ; perimeter
G1 X182.083 Y61.631 E0.75668 ; perimeter
G1 X182.396 Y61.524 E0.01360 ; perimeter
G1 X182.746 Y61.437 E0.01490 ; perimeter
G1 X183.114 Y61.381 E0.01530 ; perimeter
G1 X183.393 Y61.364 E0.01153 ; perimeter
G1 X183.756 Y61.373 E0.01495 ; perimeter
G1 X184.120 Y61.423 E0.01516 ; perimeter
G1 X184.486 Y61.520 E0.01560 ; perimeter
G1 X184.664 Y61.585 E0.00780 ; perimeter
G1 X184.992 Y61.744 E0.01501 ; perimeter
G1 X185.415 Y62.049 E0.02150 ; perimeter
G1 X185.683 Y62.340 E0.01629 ; perimeter
G1 X184.558 Y63.285 E0.06053 ; perimeter
G1 X184.439 Y63.172 E0.00676 ; perimeter
G1 X184.090 Y62.970 E0.01661 ; perimeter
G1 X183.691 Y62.845 E0.01722 ; perimeter
G1 X183.348 Y62.802 E0.01423 ; perimeter
G1 X168.635 Y75.147 E0.79123 ; perimeter
G1 X163.498 Y75.147 E0.21162 ; perimeter
G1 X161.599 Y76.740 E0.10210 ; perimeter
G1 X164.096 Y79.716 E0.16000 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.350 F10800.000 ; lift Z
G1 X104.062 Y81.668 ; move to first perimeter point
G1 Z7.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.506 Y81.668 E0.35246 ; perimeter
G1 X86.791 Y74.355 E0.46869 ; perimeter
G1 X81.654 Y74.355 E0.21162 ; perimeter
G1 X67.224 Y62.246 E0.77601 ; perimeter
G1 X67.520 Y62.333 E0.01272 ; perimeter
G1 X81.699 Y74.231 E0.76249 ; perimeter
G1 X86.836 Y74.231 E0.21162 ; perimeter
G1 X95.551 Y81.544 E0.46869 ; perimeter
G1 X104.062 Y81.544 E0.35060 ; perimeter
G1 X104.062 Y81.608 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X100.771 Y81.631 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.350 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z7.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.959 Y76.692 E0.19265 ; perimeter
G1 X86.647 Y74.751 E0.12437 ; perimeter
G1 X81.510 Y74.751 E0.21162 ; perimeter
G1 X66.774 Y62.386 E0.79244 ; perimeter
G1 X66.225 Y62.457 E0.02281 ; perimeter
G1 X65.750 Y62.604 E0.02049 ; perimeter
G1 X65.453 Y62.777 E0.01413 ; perimeter
G1 X64.900 Y62.312 E0.02978 ; perimeter
G1 X65.205 Y62.089 E0.01555 ; perimeter
G1 X65.474 Y61.958 E0.01236 ; perimeter
G1 X65.967 Y61.811 E0.02119 ; perimeter
G1 X66.276 Y61.769 E0.01284 ; perimeter
G1 X66.600 Y61.761 E0.01334 ; perimeter
G1 X66.845 Y61.776 E0.01010 ; perimeter
G1 X67.176 Y61.826 E0.01380 ; perimeter
G1 X67.718 Y61.982 E0.02327 ; perimeter
G1 X81.843 Y73.834 E0.75959 ; perimeter
G1 X86.980 Y73.834 E0.21162 ; perimeter
G1 X95.696 Y81.148 E0.46869 ; perimeter
G1 X104.458 Y81.148 E0.36099 ; perimeter
G1 X104.458 Y82.064 E0.03776 ; perimeter
G1 X95.362 Y82.064 E0.37473 ; perimeter
G1 X89.369 Y77.036 E0.32227 ; perimeter
G1 X76.588 Y92.268 E0.81913 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X88.401 Y76.740 E0.16000 ; perimeter
G1 X86.502 Y75.147 E0.10210 ; perimeter
G1 X81.365 Y75.147 E0.21162 ; perimeter
G1 X66.652 Y62.802 E0.79123 ; perimeter
G1 X66.309 Y62.845 E0.01424 ; perimeter
G1 X65.910 Y62.970 E0.01722 ; perimeter
G1 X65.561 Y63.172 E0.01661 ; perimeter
G1 X65.442 Y63.285 E0.00676 ; perimeter
G1 X64.308 Y62.333 E0.06097 ; perimeter
G1 X64.702 Y61.952 E0.02260 ; perimeter
G1 X65.005 Y61.746 E0.01509 ; perimeter
G1 X65.330 Y61.588 E0.01487 ; perimeter
G1 X65.883 Y61.422 E0.02379 ; perimeter
G1 X66.244 Y61.373 E0.01502 ; perimeter
G1 X66.607 Y61.364 E0.01495 ; perimeter
G1 X66.886 Y61.381 E0.01153 ; perimeter
G1 X67.254 Y61.437 E0.01530 ; perimeter
G1 X67.605 Y61.524 E0.01490 ; perimeter
G1 X67.917 Y61.631 E0.01360 ; perimeter
G1 X81.987 Y73.438 E0.75668 ; perimeter
G1 X87.124 Y73.438 E0.21162 ; perimeter
G1 X95.840 Y80.751 E0.46869 ; perimeter
G1 X104.855 Y80.751 E0.37137 ; perimeter
G1 X104.855 Y82.460 E0.07041 ; perimeter
G1 X95.218 Y82.460 E0.39700 ; perimeter
G1 X89.418 Y77.594 E0.31188 ; perimeter
G1 X76.637 Y92.826 E0.81913 ; perimeter
M73 P38 R84
M204 S1000 ; adjust acceleration
G1 X76.508 Y92.482 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.350 F10800.000 ; lift Z
G1 X60.589 Y73.947 ; move to first perimeter point
G1 Z7.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.864 Y71.661 E0.14653 ; perimeter
G1 X55.415 Y74.579 E0.15696 ; perimeter
G1 X54.907 Y74.154 E0.02729 ; perimeter
G1 X63.905 Y63.431 E0.57663 ; perimeter
G1 X64.412 Y63.857 E0.02729 ; perimeter
G1 X61.963 Y66.776 E0.15696 ; perimeter
G1 X64.688 Y69.062 E0.14653 ; perimeter
G1 X64.344 Y69.472 E0.02205 ; perimeter
G1 X61.619 Y67.186 E0.14653 ; perimeter
G1 X58.208 Y71.251 E0.21861 ; perimeter
G1 X60.933 Y73.537 E0.14653 ; perimeter
G1 X60.627 Y73.901 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.638 Y74.506 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X57.913 Y72.219 E0.14653 ; perimeter
G1 X55.464 Y75.138 E0.15696 ; perimeter
G1 X54.349 Y74.202 E0.05995 ; perimeter
G1 X63.856 Y62.873 E0.60929 ; perimeter
G1 X64.971 Y63.808 E0.05995 ; perimeter
G1 X62.522 Y66.727 E0.15696 ; perimeter
G1 X65.246 Y69.013 E0.14653 ; perimeter
G1 X64.393 Y70.030 E0.05471 ; perimeter
G1 X61.668 Y67.744 E0.14653 ; perimeter
G1 X58.766 Y71.202 E0.18596 ; perimeter
G1 X61.491 Y73.488 E0.14653 ; perimeter
G1 X60.676 Y74.460 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.364 Y74.214 F10800.000 ; move inwards before travel
G1 F8640
G1 X58.119 Y72.387 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.350 F10800.000 ; lift Z
G1 X111.608 Y100.093 ; move to first perimeter point
G1 Z7.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.131 Y100.093 E1.37910 ; perimeter
G1 X53.311 Y79.267 E1.33472 ; perimeter
G1 X53.174 Y78.990 E0.01272 ; perimeter
G1 X78.176 Y99.969 E1.34452 ; perimeter
G1 X111.608 Y99.969 E1.37725 ; perimeter
G1 X111.608 Y100.033 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 X112.004 Y100.489 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X77.987 Y100.489 E1.40136 ; perimeter
G1 X53.000 Y79.523 E1.34370 ; perimeter
G1 X52.752 Y79.016 E0.02327 ; perimeter
G1 X52.646 Y78.702 E0.01364 ; perimeter
G1 X52.539 Y78.143 E0.02343 ; perimeter
G1 X52.527 Y77.819 E0.01339 ; perimeter
G1 X52.554 Y77.498 E0.01326 ; perimeter
G1 X52.668 Y77.031 E0.01980 ; perimeter
G1 X52.794 Y76.751 E0.01263 ; perimeter
G1 X53.060 Y76.355 E0.01965 ; perimeter
G1 X53.945 Y75.300 E0.05675 ; perimeter
G1 X54.453 Y75.726 E0.02729 ; perimeter
G1 X53.693 Y76.631 E0.04869 ; perimeter
G1 X53.523 Y76.872 E0.01212 ; perimeter
G1 X53.370 Y77.184 E0.01433 ; perimeter
G1 X53.270 Y77.486 E0.01312 ; perimeter
G1 X53.208 Y77.970 E0.02007 ; perimeter
G1 X53.234 Y78.523 E0.02281 ; perimeter
G1 X78.320 Y99.572 E1.34906 ; perimeter
G1 X112.004 Y99.572 E1.38765 ; perimeter
G1 X112.004 Y100.429 E0.03529 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X108.712 Y100.435 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.350 F10800.000 ; lift Z
G1 X112.401 Y99.176 ; move to first perimeter point
G1 Z7.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X112.400 Y100.885 E0.07041 ; perimeter
G1 X77.842 Y100.885 E1.42362 ; perimeter
G1 X52.689 Y79.779 E1.35268 ; perimeter
G1 X52.529 Y79.490 E0.01360 ; perimeter
G1 X52.382 Y79.160 E0.01490 ; perimeter
G1 X52.264 Y78.809 E0.01524 ; perimeter
G1 X52.180 Y78.437 E0.01573 ; perimeter
G1 X52.144 Y78.178 E0.01074 ; perimeter
G1 X52.130 Y77.809 E0.01522 ; perimeter
G1 X52.162 Y77.437 E0.01538 ; perimeter
G1 X52.296 Y76.893 E0.02309 ; perimeter
G1 X52.446 Y76.558 E0.01512 ; perimeter
G1 X52.743 Y76.117 E0.02190 ; perimeter
G1 X53.897 Y74.742 E0.07395 ; perimeter
G1 X55.011 Y75.677 E0.05995 ; perimeter
G1 X54.007 Y76.874 E0.06436 ; perimeter
G1 X53.865 Y77.075 E0.01015 ; perimeter
G1 X53.737 Y77.334 E0.01190 ; perimeter
G1 X53.658 Y77.574 E0.01043 ; perimeter
G1 X53.605 Y77.985 E0.01707 ; perimeter
G1 X53.622 Y78.331 E0.01424 ; perimeter
G1 X78.465 Y99.176 E1.33597 ; perimeter
G1 X112.341 Y99.176 E1.39557 ; perimeter
M204 S1000 ; adjust acceleration
G1 X112.163 Y99.497 F10800.000 ; move inwards before travel
G1 F8640
G1 X112.400 Y100.885 E-0.39491 ; wipe and retract
G1 X110.819 Y100.885 E-0.36509 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.350 F10800.000 ; lift Z
G1 X138.107 Y138.239 ; move to first perimeter point
G1 Z7.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X138.107 Y138.115 E0.00510 ; perimeter
G1 X171.539 Y138.115 E1.37725 ; perimeter
G1 X196.540 Y117.136 E1.34452 ; perimeter
G1 X196.403 Y117.413 E0.01272 ; perimeter
G1 X171.584 Y138.239 E1.33472 ; perimeter
G1 X138.167 Y138.239 E1.37663 ; perimeter
M204 S1000 ; adjust acceleration
G1 X137.711 Y138.635 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X137.710 Y137.719 E0.03776 ; perimeter
G1 X171.395 Y137.719 E1.38765 ; perimeter
G1 X196.481 Y116.669 E1.34906 ; perimeter
G1 X196.507 Y116.116 E0.02281 ; perimeter
G1 X196.445 Y115.632 E0.02007 ; perimeter
G1 X196.345 Y115.330 E0.01312 ; perimeter
G1 X196.192 Y115.018 E0.01433 ; perimeter
G1 X196.022 Y114.778 E0.01212 ; perimeter
G1 X195.262 Y113.872 E0.04869 ; perimeter
G1 X195.769 Y113.446 E0.02729 ; perimeter
G1 X196.661 Y114.509 E0.05713 ; perimeter
G1 X196.849 Y114.771 E0.01332 ; perimeter
G1 X197.048 Y115.183 E0.01883 ; perimeter
G1 X197.128 Y115.463 E0.01200 ; perimeter
G1 X197.188 Y115.974 E0.02119 ; perimeter
G1 X197.176 Y116.286 E0.01284 ; perimeter
G1 X197.070 Y116.844 E0.02343 ; perimeter
G1 X196.963 Y117.162 E0.01380 ; perimeter
G1 X196.715 Y117.669 E0.02327 ; perimeter
G1 X171.728 Y138.635 E1.34370 ; perimeter
G1 X137.771 Y138.635 E1.39889 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X137.710 Y137.719 E-0.21210 ; wipe and retract
G1 X140.083 Y137.719 E-0.54790 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.350 F10800.000 ; lift Z
G1 X137.314 Y137.322 ; move to first perimeter point
G1 Z7.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.250 Y137.322 E1.39804 ; perimeter
G1 X196.093 Y116.477 E1.33597 ; perimeter
G1 X196.109 Y116.132 E0.01424 ; perimeter
G1 X196.057 Y115.720 E0.01707 ; perimeter
G1 X195.977 Y115.480 E0.01043 ; perimeter
G1 X195.850 Y115.221 E0.01190 ; perimeter
G1 X195.708 Y115.020 E0.01015 ; perimeter
G1 X194.703 Y113.823 E0.06436 ; perimeter
G1 X195.818 Y112.888 E0.05995 ; perimeter
G1 X196.974 Y114.265 E0.07409 ; perimeter
G1 X197.191 Y114.568 E0.01535 ; perimeter
G1 X197.420 Y115.041 E0.02164 ; perimeter
G1 X197.518 Y115.385 E0.01474 ; perimeter
G1 X197.585 Y115.959 E0.02379 ; perimeter
G1 X197.571 Y116.323 E0.01502 ; perimeter
G1 X197.516 Y116.682 E0.01495 ; perimeter
G1 X197.451 Y116.954 E0.01153 ; perimeter
G1 X197.332 Y117.306 E0.01530 ; perimeter
G1 X197.185 Y117.636 E0.01490 ; perimeter
G1 X197.026 Y117.925 E0.01360 ; perimeter
G1 X171.872 Y139.031 E1.35268 ; perimeter
G1 X137.315 Y139.031 E1.42362 ; perimeter
G1 X137.314 Y137.382 E0.06794 ; perimeter
M204 S1000 ; adjust acceleration
G1 X137.714 Y137.329 F10800.000 ; move inwards before travel
G1 F8640
G1 X140.605 Y137.376 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.350 F10800.000 ; lift Z
G1 X189.126 Y112.093 ; move to first perimeter point
G1 Z7.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X188.782 Y111.683 E0.02205 ; perimeter
G1 X191.507 Y109.397 E0.14653 ; perimeter
G1 X188.096 Y105.332 E0.21861 ; perimeter
G1 X185.371 Y107.618 E0.14653 ; perimeter
G1 X185.027 Y107.208 E0.02205 ; perimeter
G1 X187.752 Y104.922 E0.14653 ; perimeter
G1 X185.303 Y102.003 E0.15696 ; perimeter
G1 X185.810 Y101.577 E0.02730 ; perimeter
G1 X194.807 Y112.300 E0.57663 ; perimeter
G1 X194.300 Y112.726 E0.02729 ; perimeter
G1 X191.851 Y109.807 E0.15696 ; perimeter
G1 X189.172 Y112.055 E0.14406 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.077 Y112.652 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X188.224 Y111.634 E0.05471 ; perimeter
G1 X190.948 Y109.348 E0.14653 ; perimeter
G1 X188.047 Y105.890 E0.18596 ; perimeter
G1 X185.322 Y108.176 E0.14653 ; perimeter
G1 X184.468 Y107.159 E0.05471 ; perimeter
G1 X187.193 Y104.873 E0.14653 ; perimeter
G1 X184.744 Y101.954 E0.15696 ; perimeter
G1 X185.859 Y101.019 E0.05995 ; perimeter
G1 X195.366 Y112.349 E0.60929 ; perimeter
G1 X194.251 Y113.284 E0.05995 ; perimeter
G1 X191.802 Y110.365 E0.15696 ; perimeter
G1 X189.123 Y112.613 E0.14406 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.117 Y112.254 F10800.000 ; move inwards before travel
G1 F8640
G1 X188.224 Y111.634 E-0.30695 ; wipe and retract
G1 X189.727 Y110.373 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.350 F10800.000 ; lift Z
G1 X145.653 Y119.814 ; move to first perimeter point
G1 Z7.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X145.653 Y119.690 E0.00510 ; perimeter
G1 X154.164 Y119.690 E0.35060 ; perimeter
G1 X162.879 Y112.377 E0.46869 ; perimeter
G1 X168.016 Y112.377 E0.21162 ; perimeter
G1 X182.195 Y100.480 E0.76249 ; perimeter
G1 X182.491 Y100.393 E0.01272 ; perimeter
G1 X168.061 Y112.501 E0.77601 ; perimeter
G1 X162.924 Y112.501 E0.21162 ; perimeter
G1 X154.209 Y119.814 E0.46869 ; perimeter
M73 Q38 S85
G1 X145.713 Y119.814 E0.34999 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X145.653 Y119.690 E-0.03178 ; wipe and retract
G1 X148.807 Y119.690 E-0.72822 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.350 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z7.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.346 Y115.182 E0.82160 ; perimeter
G1 X154.353 Y120.210 E0.32227 ; perimeter
G1 X145.257 Y120.210 E0.37473 ; perimeter
G1 X145.257 Y119.294 E0.03776 ; perimeter
G1 X154.019 Y119.294 E0.36099 ; perimeter
G1 X162.735 Y111.981 E0.46869 ; perimeter
G1 X167.872 Y111.981 E0.21162 ; perimeter
G1 X181.996 Y100.129 E0.75959 ; perimeter
G1 X182.539 Y99.972 E0.02327 ; perimeter
G1 X182.870 Y99.922 E0.01380 ; perimeter
G1 X183.115 Y99.907 E0.01010 ; perimeter
G1 X183.439 Y99.915 E0.01334 ; perimeter
G1 X183.757 Y99.958 E0.01323 ; perimeter
G1 X184.082 Y100.045 E0.01387 ; perimeter
G1 X184.503 Y100.232 E0.01895 ; perimeter
G1 X184.816 Y100.458 E0.01591 ; perimeter
G1 X184.262 Y100.923 E0.02980 ; perimeter
G1 X183.965 Y100.751 E0.01413 ; perimeter
G1 X183.490 Y100.603 E0.02049 ; perimeter
G1 X182.941 Y100.533 E0.02281 ; perimeter
G1 X168.205 Y112.897 E0.79244 ; perimeter
G1 X163.068 Y112.897 E0.21162 ; perimeter
G1 X160.756 Y114.838 E0.12437 ; perimeter
G1 X163.762 Y118.420 E0.19265 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.297 Y115.740 E0.82160 ; perimeter
G1 X154.497 Y120.607 E0.31188 ; perimeter
G1 X144.860 Y120.607 E0.39700 ; perimeter
G1 X144.860 Y118.897 E0.07041 ; perimeter
G1 X153.875 Y118.897 E0.37137 ; perimeter
G1 X162.590 Y111.584 E0.46869 ; perimeter
G1 X167.727 Y111.584 E0.21162 ; perimeter
G1 X181.798 Y99.778 E0.75668 ; perimeter
G1 X182.110 Y99.671 E0.01360 ; perimeter
G1 X182.461 Y99.583 E0.01490 ; perimeter
G1 X182.828 Y99.527 E0.01530 ; perimeter
G1 X183.108 Y99.510 E0.01153 ; perimeter
G1 X183.471 Y99.519 E0.01495 ; perimeter
G1 X183.835 Y99.569 E0.01516 ; perimeter
G1 X184.201 Y99.666 E0.01560 ; perimeter
G1 X184.379 Y99.731 E0.00780 ; perimeter
G1 X184.707 Y99.890 E0.01501 ; perimeter
G1 X185.130 Y100.196 E0.02150 ; perimeter
G1 X185.398 Y100.486 E0.01629 ; perimeter
G1 X184.273 Y101.431 E0.06053 ; perimeter
G1 X184.153 Y101.318 E0.00676 ; perimeter
G1 X183.805 Y101.116 E0.01661 ; perimeter
G1 X183.405 Y100.992 E0.01722 ; perimeter
G1 X183.063 Y100.948 E0.01423 ; perimeter
G1 X168.350 Y113.294 E0.79123 ; perimeter
G1 X163.213 Y113.294 E0.21162 ; perimeter
G1 X161.314 Y114.887 E0.10210 ; perimeter
G1 X163.810 Y117.862 E0.16000 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.464 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.350 F10800.000 ; lift Z
G1 X103.777 Y119.814 ; move to first perimeter point
G1 Z7.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.221 Y119.814 E0.35246 ; perimeter
G1 X86.506 Y112.501 E0.46869 ; perimeter
G1 X81.369 Y112.501 E0.21162 ; perimeter
G1 X66.939 Y100.393 E0.77601 ; perimeter
G1 X67.235 Y100.480 E0.01272 ; perimeter
G1 X81.414 Y112.377 E0.76249 ; perimeter
G1 X86.551 Y112.377 E0.21162 ; perimeter
G1 X95.266 Y119.690 E0.46869 ; perimeter
G1 X103.777 Y119.690 E0.35060 ; perimeter
G1 X103.777 Y119.754 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X100.485 Y119.777 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.350 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z7.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.674 Y114.838 E0.19265 ; perimeter
G1 X86.361 Y112.897 E0.12437 ; perimeter
G1 X81.224 Y112.897 E0.21162 ; perimeter
G1 X66.489 Y100.533 E0.79244 ; perimeter
G1 X65.940 Y100.603 E0.02281 ; perimeter
G1 X65.465 Y100.751 E0.02049 ; perimeter
G1 X65.168 Y100.923 E0.01413 ; perimeter
G1 X64.614 Y100.458 E0.02978 ; perimeter
G1 X64.919 Y100.236 E0.01555 ; perimeter
G1 X65.189 Y100.104 E0.01236 ; perimeter
G1 X65.682 Y99.957 E0.02119 ; perimeter
G1 X65.991 Y99.915 E0.01284 ; perimeter
G1 X66.315 Y99.907 E0.01334 ; perimeter
G1 X66.559 Y99.922 E0.01010 ; perimeter
G1 X66.891 Y99.972 E0.01380 ; perimeter
G1 X67.433 Y100.129 E0.02327 ; perimeter
G1 X81.558 Y111.981 E0.75959 ; perimeter
G1 X86.695 Y111.981 E0.21162 ; perimeter
G1 X95.410 Y119.294 E0.46869 ; perimeter
G1 X104.173 Y119.294 E0.36099 ; perimeter
G1 X104.173 Y120.210 E0.03776 ; perimeter
G1 X95.077 Y120.210 E0.37473 ; perimeter
G1 X89.084 Y115.182 E0.32227 ; perimeter
G1 X76.303 Y130.414 E0.81913 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X88.116 Y114.887 E0.16000 ; perimeter
G1 X86.217 Y113.294 E0.10210 ; perimeter
G1 X81.080 Y113.294 E0.21162 ; perimeter
G1 X66.367 Y100.948 E0.79123 ; perimeter
G1 X66.024 Y100.992 E0.01424 ; perimeter
G1 X65.625 Y101.116 E0.01722 ; perimeter
G1 X65.276 Y101.318 E0.01661 ; perimeter
G1 X65.157 Y101.431 E0.00676 ; perimeter
G1 X64.023 Y100.479 E0.06097 ; perimeter
G1 X64.417 Y100.098 E0.02260 ; perimeter
G1 X64.720 Y99.892 E0.01509 ; perimeter
G1 X65.045 Y99.734 E0.01487 ; perimeter
G1 X65.598 Y99.568 E0.02379 ; perimeter
G1 X65.959 Y99.519 E0.01502 ; perimeter
G1 X66.322 Y99.510 E0.01495 ; perimeter
G1 X66.601 Y99.527 E0.01153 ; perimeter
G1 X66.968 Y99.583 E0.01530 ; perimeter
G1 X67.319 Y99.671 E0.01490 ; perimeter
G1 X67.632 Y99.778 E0.01360 ; perimeter
G1 X81.702 Y111.584 E0.75668 ; perimeter
G1 X86.839 Y111.584 E0.21162 ; perimeter
G1 X95.555 Y118.897 E0.46869 ; perimeter
G1 X104.569 Y118.897 E0.37137 ; perimeter
G1 X104.569 Y120.607 E0.07041 ; perimeter
G1 X94.932 Y120.607 E0.39700 ; perimeter
G1 X89.133 Y115.740 E0.31188 ; perimeter
G1 X76.352 Y130.972 E0.81913 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.223 Y130.628 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.350 F10800.000 ; lift Z
G1 X60.304 Y112.093 ; move to first perimeter point
G1 Z7.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.579 Y109.807 E0.14653 ; perimeter
G1 X55.130 Y112.726 E0.15696 ; perimeter
G1 X54.622 Y112.300 E0.02729 ; perimeter
G1 X63.620 Y101.577 E0.57663 ; perimeter
G1 X64.127 Y102.003 E0.02729 ; perimeter
G1 X61.678 Y104.922 E0.15696 ; perimeter
G1 X64.403 Y107.208 E0.14653 ; perimeter
G1 X64.059 Y107.618 E0.02205 ; perimeter
G1 X61.334 Y105.332 E0.14653 ; perimeter
G1 X57.923 Y109.397 E0.21861 ; perimeter
G1 X60.648 Y111.683 E0.14653 ; perimeter
G1 X60.342 Y112.047 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.352 Y112.652 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X57.628 Y110.365 E0.14653 ; perimeter
G1 X55.179 Y113.284 E0.15696 ; perimeter
G1 X54.064 Y112.349 E0.05995 ; perimeter
G1 X63.571 Y101.019 E0.60929 ; perimeter
G1 X64.685 Y101.954 E0.05995 ; perimeter
G1 X62.236 Y104.873 E0.15696 ; perimeter
G1 X64.961 Y107.159 E0.14653 ; perimeter
G1 X64.108 Y108.176 E0.05471 ; perimeter
G1 X61.383 Y105.890 E0.14653 ; perimeter
G1 X58.481 Y109.348 E0.18596 ; perimeter
G1 X61.206 Y111.634 E0.14653 ; perimeter
G1 X60.391 Y112.606 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.079 Y112.360 F10800.000 ; move inwards before travel
G1 F8640
G1 X57.834 Y110.533 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.350 F10800.000 ; lift Z
G1 X111.323 Y138.239 ; move to first perimeter point
G1 Z7.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X77.846 Y138.239 E1.37910 ; perimeter
G1 X53.026 Y117.413 E1.33472 ; perimeter
G1 X52.889 Y117.136 E0.01272 ; perimeter
G1 X77.891 Y138.115 E1.34452 ; perimeter
G1 X111.323 Y138.115 E1.37725 ; perimeter
G1 X111.323 Y138.179 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 X111.719 Y138.635 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X77.701 Y138.635 E1.40136 ; perimeter
G1 X52.715 Y117.669 E1.34370 ; perimeter
G1 X52.467 Y117.162 E0.02327 ; perimeter
G1 X52.361 Y116.848 E0.01364 ; perimeter
G1 X52.254 Y116.290 E0.02343 ; perimeter
G1 X52.242 Y115.965 E0.01339 ; perimeter
G1 X52.269 Y115.644 E0.01326 ; perimeter
G1 X52.383 Y115.177 E0.01980 ; perimeter
G1 X52.509 Y114.897 E0.01263 ; perimeter
G1 X52.775 Y114.502 E0.01965 ; perimeter
G1 X53.660 Y113.446 E0.05675 ; perimeter
G1 X54.168 Y113.872 E0.02729 ; perimeter
G1 X53.408 Y114.778 E0.04869 ; perimeter
G1 X53.238 Y115.018 E0.01212 ; perimeter
G1 X53.084 Y115.330 E0.01433 ; perimeter
G1 X52.984 Y115.632 E0.01312 ; perimeter
G1 X52.923 Y116.116 E0.02007 ; perimeter
G1 X52.949 Y116.669 E0.02281 ; perimeter
G1 X78.035 Y137.719 E1.34906 ; perimeter
G1 X111.719 Y137.719 E1.38765 ; perimeter
G1 X111.719 Y138.575 E0.03529 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X108.427 Y138.581 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.350 F10800.000 ; lift Z
G1 X112.116 Y137.322 ; move to first perimeter point
G1 Z7.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X112.115 Y139.031 E0.07041 ; perimeter
G1 X77.557 Y139.031 E1.42362 ; perimeter
G1 X52.404 Y117.925 E1.35268 ; perimeter
G1 X52.244 Y117.636 E0.01360 ; perimeter
G1 X52.097 Y117.306 E0.01490 ; perimeter
G1 X51.979 Y116.955 E0.01524 ; perimeter
G1 X51.895 Y116.583 E0.01573 ; perimeter
G1 X51.859 Y116.325 E0.01074 ; perimeter
G1 X51.845 Y115.955 E0.01522 ; perimeter
G1 X51.876 Y115.583 E0.01538 ; perimeter
G1 X52.010 Y115.039 E0.02309 ; perimeter
G1 X52.161 Y114.704 E0.01512 ; perimeter
G1 X52.458 Y114.263 E0.02190 ; perimeter
G1 X53.611 Y112.888 E0.07395 ; perimeter
G1 X54.726 Y113.823 E0.05995 ; perimeter
G1 X53.722 Y115.020 E0.06436 ; perimeter
G1 X53.580 Y115.221 E0.01015 ; perimeter
G1 X53.452 Y115.480 E0.01190 ; perimeter
G1 X53.373 Y115.720 E0.01043 ; perimeter
G1 X53.320 Y116.132 E0.01707 ; perimeter
G1 X53.337 Y116.477 E0.01424 ; perimeter
G1 X78.179 Y137.322 E1.33597 ; perimeter
G1 X112.056 Y137.322 E1.39557 ; perimeter
M204 S1000 ; adjust acceleration
G1 X111.878 Y137.644 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;8


G1 F8640
G1 X112.115 Y139.031 E-0.39491 ; wipe and retract
G1 X110.533 Y139.031 E-0.36509 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;8
G1 X110.886 Y100.268 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.067 Y100.268 E1.35199 ; perimeter
G1 X53.539 Y79.686 E1.31908 ; perimeter
G1 X53.253 Y79.285 E0.02027 ; perimeter
G1 X78.112 Y100.144 E1.33684 ; perimeter
G1 X110.886 Y100.144 E1.35012 ; perimeter
G1 X110.886 Y100.208 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 X111.283 Y100.664 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X77.923 Y100.664 E1.37429 ; perimeter
G1 X53.249 Y79.960 E1.32688 ; perimeter
G1 X52.997 Y79.626 E0.01727 ; perimeter
G1 X52.827 Y79.347 E0.01343 ; perimeter
G1 X52.617 Y78.900 E0.02035 ; perimeter
G1 X52.456 Y78.358 E0.02328 ; perimeter
G1 X52.405 Y78.030 E0.01368 ; perimeter
G1 X52.393 Y77.712 E0.01311 ; perimeter
G1 X52.451 Y77.209 E0.02088 ; perimeter
G1 X52.535 Y76.915 E0.01258 ; perimeter
G1 X52.662 Y76.634 E0.01272 ; perimeter
G1 X52.926 Y76.243 E0.01941 ; perimeter
G1 X53.811 Y75.188 E0.05676 ; perimeter
G1 X54.319 Y75.613 E0.02730 ; perimeter
G1 X53.552 Y76.527 E0.04913 ; perimeter
G1 X53.315 Y76.887 E0.01774 ; perimeter
G1 X53.187 Y77.195 E0.01377 ; perimeter
G1 X53.087 Y77.647 E0.01906 ; perimeter
G1 X53.082 Y78.132 E0.02000 ; perimeter
G1 X53.183 Y78.708 E0.02408 ; perimeter
G1 X78.257 Y99.747 E1.34840 ; perimeter
G1 X111.281 Y99.747 E1.36048 ; perimeter
M73 P39 R83
G1 X111.283 Y100.604 E0.03529 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X107.991 Y100.610 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.600 F10800.000 ; lift Z
G1 X111.677 Y99.351 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X111.680 Y101.060 E0.07041 ; perimeter
G1 X77.779 Y101.060 E1.39659 ; perimeter
G1 X52.960 Y80.235 E1.33468 ; perimeter
G1 X52.669 Y79.849 E0.01993 ; perimeter
G1 X52.478 Y79.535 E0.01512 ; perimeter
G1 X52.249 Y79.048 E0.02217 ; perimeter
G1 X52.128 Y78.691 E0.01555 ; perimeter
G1 X52.067 Y78.435 E0.01082 ; perimeter
G1 X52.010 Y78.069 E0.01528 ; perimeter
G1 X51.996 Y77.697 E0.01531 ; perimeter
G1 X52.061 Y77.131 E0.02348 ; perimeter
G1 X52.162 Y76.779 E0.01510 ; perimeter
G1 X52.315 Y76.440 E0.01529 ; perimeter
G1 X52.609 Y76.004 E0.02165 ; perimeter
G1 X53.762 Y74.629 E0.07395 ; perimeter
G1 X54.877 Y75.565 E0.05995 ; perimeter
G1 X53.871 Y76.764 E0.06451 ; perimeter
G1 X53.667 Y77.073 E0.01525 ; perimeter
G1 X53.567 Y77.315 E0.01078 ; perimeter
G1 X53.483 Y77.692 E0.01592 ; perimeter
G1 X53.479 Y78.100 E0.01679 ; perimeter
G1 X53.548 Y78.497 E0.01662 ; perimeter
G1 X78.401 Y99.351 E1.33650 ; perimeter
G1 X111.617 Y99.351 E1.36837 ; perimeter
M204 S1000 ; adjust acceleration
G1 X111.439 Y99.673 F10800.000 ; move inwards before travel
G1 F8640
G1 X111.680 Y101.060 E-0.39494 ; wipe and retract
G1 X110.099 Y101.060 E-0.36506 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.600 F10800.000 ; lift Z
G1 X60.450 Y73.830 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.730 Y71.548 E0.14626 ; perimeter
G1 X55.281 Y74.467 E0.15696 ; perimeter
G1 X54.773 Y74.041 E0.02729 ; perimeter
G1 X63.771 Y63.318 E0.57663 ; perimeter
G1 X64.278 Y63.744 E0.02729 ; perimeter
G1 X61.829 Y66.663 E0.15696 ; perimeter
G1 X64.549 Y68.945 E0.14626 ; perimeter
G1 X64.205 Y69.355 E0.02205 ; perimeter
G1 X61.485 Y67.073 E0.14626 ; perimeter
G1 X58.074 Y71.138 E0.21861 ; perimeter
G1 X60.794 Y73.420 E0.14626 ; perimeter
G1 X60.488 Y73.784 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.498 Y74.389 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X57.779 Y72.107 E0.14626 ; perimeter
G1 X55.330 Y75.025 E0.15696 ; perimeter
G1 X54.215 Y74.090 E0.05995 ; perimeter
G1 X63.722 Y62.760 E0.60929 ; perimeter
G1 X64.837 Y63.696 E0.05995 ; perimeter
G1 X62.388 Y66.614 E0.15696 ; perimeter
G1 X65.107 Y68.896 E0.14626 ; perimeter
G1 X64.254 Y69.914 E0.05471 ; perimeter
G1 X61.534 Y67.631 E0.14626 ; perimeter
G1 X58.632 Y71.089 E0.18596 ; perimeter
G1 X61.352 Y73.371 E0.14626 ; perimeter
G1 X60.537 Y74.343 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.225 Y74.097 F10800.000 ; move inwards before travel
G1 F8640
G1 X57.980 Y72.270 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.600 F10800.000 ; lift Z
G1 X103.812 Y81.493 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.570 Y81.493 E0.33954 ; perimeter
G1 X86.855 Y74.180 E0.46869 ; perimeter
G1 X81.718 Y74.180 E0.21162 ; perimeter
G1 X67.537 Y62.281 E0.76259 ; perimeter
G1 X67.972 Y62.484 E0.01980 ; perimeter
G1 X81.763 Y74.056 E0.74160 ; perimeter
G1 X86.900 Y74.056 E0.21162 ; perimeter
G1 X95.615 Y81.369 E0.46869 ; perimeter
G1 X103.812 Y81.369 E0.33768 ; perimeter
G1 X103.812 Y81.433 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X100.521 Y81.457 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.600 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X89.072 Y76.557 E0.19986 ; perimeter
G1 X86.710 Y74.576 E0.12699 ; perimeter
G1 X81.573 Y74.576 E0.21162 ; perimeter
G1 X66.948 Y62.304 E0.78652 ; perimeter
G1 X66.378 Y62.304 E0.02347 ; perimeter
G1 X66.151 Y62.336 E0.00944 ; perimeter
G1 X65.887 Y62.395 E0.01113 ; perimeter
G1 X65.596 Y62.503 E0.01279 ; perimeter
G1 X65.319 Y62.664 E0.01321 ; perimeter
G1 X64.765 Y62.199 E0.02980 ; perimeter
G1 X65.070 Y61.977 E0.01552 ; perimeter
G1 X65.344 Y61.844 E0.01258 ; perimeter
G1 X65.830 Y61.699 E0.02088 ; perimeter
G1 X66.145 Y61.656 E0.01311 ; perimeter
G1 X66.706 Y61.663 E0.02308 ; perimeter
G1 X67.044 Y61.714 E0.01412 ; perimeter
G1 X67.362 Y61.794 E0.01351 ; perimeter
G1 X67.825 Y61.964 E0.02030 ; perimeter
G1 X68.193 Y62.152 E0.01701 ; perimeter
G1 X81.907 Y73.659 E0.73752 ; perimeter
G1 X87.044 Y73.659 E0.21162 ; perimeter
G1 X95.759 Y80.972 E0.46869 ; perimeter
G1 X104.208 Y80.972 E0.34806 ; perimeter
G1 X104.208 Y81.889 E0.03776 ; perimeter
G1 X95.426 Y81.889 E0.36181 ; perimeter
G1 X89.482 Y76.902 E0.31964 ; perimeter
G1 X76.588 Y92.268 E0.82634 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X88.513 Y76.606 E0.16721 ; perimeter
G1 X86.566 Y74.972 E0.10472 ; perimeter
G1 X81.429 Y74.972 E0.21162 ; perimeter
G1 X66.804 Y62.700 E0.78651 ; perimeter
G1 X66.406 Y62.701 E0.01640 ; perimeter
G1 X66.000 Y62.776 E0.01700 ; perimeter
G1 X65.766 Y62.862 E0.01028 ; perimeter
G1 X65.425 Y63.061 E0.01625 ; perimeter
G1 X65.308 Y63.172 E0.00664 ; perimeter
G1 X64.174 Y62.221 E0.06096 ; perimeter
G1 X64.564 Y61.843 E0.02235 ; perimeter
G1 X64.870 Y61.634 E0.01529 ; perimeter
G1 X65.200 Y61.473 E0.01510 ; perimeter
G1 X65.746 Y61.310 E0.02348 ; perimeter
G1 X66.114 Y61.260 E0.01531 ; perimeter
G1 X66.747 Y61.268 E0.02608 ; perimeter
G1 X67.123 Y61.325 E0.01564 ; perimeter
G1 X67.479 Y61.415 E0.01516 ; perimeter
G1 X67.984 Y61.600 E0.02213 ; perimeter
G1 X68.413 Y61.819 E0.01984 ; perimeter
G1 X82.051 Y73.263 E0.73344 ; perimeter
G1 X87.188 Y73.263 E0.21162 ; perimeter
G1 X95.904 Y80.576 E0.46869 ; perimeter
G1 X104.605 Y80.576 E0.35845 ; perimeter
G1 X104.605 Y82.285 E0.07041 ; perimeter
G1 X95.281 Y82.285 E0.38408 ; perimeter
G1 X89.531 Y77.460 E0.30926 ; perimeter
G1 X76.637 Y92.826 E0.82634 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.507 Y92.482 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.600 F10800.000 ; lift Z
G1 X146.188 Y81.493 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X146.188 Y81.369 E0.00510 ; perimeter
G1 X154.385 Y81.369 E0.33768 ; perimeter
G1 X163.100 Y74.056 E0.46869 ; perimeter
G1 X168.237 Y74.056 E0.21162 ; perimeter
G1 X182.036 Y62.477 E0.74205 ; perimeter
G1 X182.478 Y62.268 E0.02017 ; perimeter
G1 X168.282 Y74.180 E0.76342 ; perimeter
G1 X163.145 Y74.180 E0.21162 ; perimeter
G1 X154.430 Y81.493 E0.46869 ; perimeter
G1 X146.248 Y81.493 E0.33706 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X146.188 Y81.369 E-0.03178 ; wipe and retract
G1 X149.342 Y81.369 E-0.72822 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.600 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.518 Y76.902 E0.82881 ; perimeter
G1 X154.574 Y81.889 E0.31964 ; perimeter
G1 X145.792 Y81.889 E0.36181 ; perimeter
G1 X145.792 Y80.972 E0.03776 ; perimeter
G1 X154.241 Y80.972 E0.34806 ; perimeter
G1 X162.956 Y73.659 E0.46869 ; perimeter
G1 X168.093 Y73.659 E0.21162 ; perimeter
G1 X181.813 Y62.147 E0.73779 ; perimeter
G1 X182.337 Y61.897 E0.02397 ; perimeter
G1 X182.819 Y61.745 E0.02079 ; perimeter
G1 X183.301 Y61.662 E0.02014 ; perimeter
G1 X183.855 Y61.656 E0.02282 ; perimeter
G1 X184.179 Y61.700 E0.01347 ; perimeter
G1 X184.639 Y61.836 E0.01979 ; perimeter
G1 X184.923 Y61.974 E0.01300 ; perimeter
G1 X185.235 Y62.199 E0.01585 ; perimeter
G1 X184.681 Y62.664 E0.02983 ; perimeter
G1 X184.404 Y62.503 E0.01321 ; perimeter
G1 X184.113 Y62.395 E0.01279 ; perimeter
G1 X183.849 Y62.336 E0.01113 ; perimeter
G1 X183.622 Y62.304 E0.00944 ; perimeter
G1 X183.052 Y62.304 E0.02347 ; perimeter
G1 X168.427 Y74.576 E0.78652 ; perimeter
G1 X163.290 Y74.576 E0.21162 ; perimeter
G1 X160.928 Y76.557 E0.12699 ; perimeter
G1 X164.047 Y80.274 E0.19986 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.469 Y77.460 E0.82881 ; perimeter
G1 X154.719 Y82.285 E0.30926 ; perimeter
G1 X145.395 Y82.285 E0.38408 ; perimeter
G1 X145.395 Y80.576 E0.07041 ; perimeter
G1 X154.096 Y80.576 E0.35845 ; perimeter
G1 X162.812 Y73.263 E0.46869 ; perimeter
G1 X167.949 Y73.263 E0.21162 ; perimeter
M73 Q39 S84
G1 X181.589 Y61.818 E0.73353 ; perimeter
G1 X181.855 Y61.675 E0.01241 ; perimeter
G1 X182.198 Y61.525 E0.01546 ; perimeter
G1 X182.725 Y61.359 E0.02276 ; perimeter
G1 X183.255 Y61.268 E0.02214 ; perimeter
G1 X183.886 Y61.260 E0.02598 ; perimeter
G1 X184.257 Y61.311 E0.01544 ; perimeter
G1 X184.629 Y61.410 E0.01586 ; perimeter
G1 X185.127 Y61.632 E0.02247 ; perimeter
G1 X185.546 Y61.934 E0.02125 ; perimeter
G1 X185.817 Y62.228 E0.01649 ; perimeter
G1 X184.692 Y63.172 E0.06051 ; perimeter
G1 X184.575 Y63.061 E0.00664 ; perimeter
G1 X184.234 Y62.862 E0.01625 ; perimeter
G1 X184.000 Y62.776 E0.01028 ; perimeter
G1 X183.594 Y62.701 E0.01700 ; perimeter
G1 X183.196 Y62.700 E0.01640 ; perimeter
G1 X168.571 Y74.972 E0.78651 ; perimeter
G1 X163.434 Y74.972 E0.21162 ; perimeter
G1 X161.487 Y76.606 E0.10472 ; perimeter
G1 X164.096 Y79.716 E0.16721 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.600 F10800.000 ; lift Z
G1 X189.550 Y73.830 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X189.206 Y73.420 E0.02205 ; perimeter
G1 X191.926 Y71.138 E0.14626 ; perimeter
G1 X188.515 Y67.073 E0.21861 ; perimeter
G1 X185.795 Y69.355 E0.14626 ; perimeter
G1 X185.451 Y68.945 E0.02205 ; perimeter
G1 X188.171 Y66.663 E0.14626 ; perimeter
G1 X185.722 Y63.744 E0.15696 ; perimeter
G1 X186.229 Y63.318 E0.02729 ; perimeter
G1 X195.227 Y74.041 E0.57663 ; perimeter
G1 X194.719 Y74.467 E0.02729 ; perimeter
G1 X192.270 Y71.548 E0.15696 ; perimeter
G1 X189.596 Y73.792 E0.14378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.502 Y74.389 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X188.648 Y73.371 E0.05471 ; perimeter
G1 X191.368 Y71.089 E0.14626 ; perimeter
G1 X188.466 Y67.631 E0.18596 ; perimeter
G1 X185.746 Y69.914 E0.14626 ; perimeter
G1 X184.893 Y68.896 E0.05471 ; perimeter
G1 X187.612 Y66.614 E0.14626 ; perimeter
G1 X185.163 Y63.696 E0.15696 ; perimeter
G1 X186.278 Y62.760 E0.05995 ; perimeter
G1 X195.785 Y74.090 E0.60929 ; perimeter
G1 X194.670 Y75.025 E0.05995 ; perimeter
G1 X192.221 Y72.107 E0.15696 ; perimeter
G1 X189.548 Y74.350 E0.14378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.541 Y73.991 F10800.000 ; move inwards before travel
G1 F8640
G1 X188.648 Y73.371 E-0.30695 ; wipe and retract
G1 X190.151 Y72.110 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.600 F10800.000 ; lift Z
G1 X139.114 Y100.268 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X139.114 Y100.144 E0.00510 ; perimeter
G1 X171.888 Y100.144 E1.35012 ; perimeter
G1 X196.747 Y79.285 E1.33684 ; perimeter
G1 X196.461 Y79.686 E0.02027 ; perimeter
G1 X171.933 Y100.268 E1.31908 ; perimeter
G1 X139.174 Y100.268 E1.34952 ; perimeter
M204 S1000 ; adjust acceleration
G1 X138.717 Y100.664 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X138.719 Y99.747 E0.03776 ; perimeter
G1 X171.743 Y99.747 E1.36048 ; perimeter
G1 X196.817 Y78.708 E1.34840 ; perimeter
G1 X196.918 Y78.132 E0.02408 ; perimeter
G1 X196.913 Y77.647 E0.02000 ; perimeter
G1 X196.813 Y77.195 E0.01906 ; perimeter
G1 X196.685 Y76.887 E0.01377 ; perimeter
G1 X196.448 Y76.527 E0.01774 ; perimeter
G1 X195.681 Y75.613 E0.04913 ; perimeter
G1 X196.189 Y75.188 E0.02729 ; perimeter
G1 X197.080 Y76.250 E0.05712 ; perimeter
G1 X197.271 Y76.517 E0.01351 ; perimeter
G1 X197.467 Y76.923 E0.01859 ; perimeter
G1 X197.554 Y77.226 E0.01300 ; perimeter
G1 X197.607 Y77.704 E0.01979 ; perimeter
G1 X197.595 Y78.030 E0.01347 ; perimeter
G1 X197.544 Y78.358 E0.01368 ; perimeter
G1 X197.383 Y78.900 E0.02328 ; perimeter
G1 X197.173 Y79.347 E0.02035 ; perimeter
G1 X197.003 Y79.626 E0.01343 ; perimeter
G1 X196.751 Y79.960 E0.01727 ; perimeter
G1 X172.077 Y100.664 E1.32688 ; perimeter
G1 X138.777 Y100.664 E1.37182 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X138.719 Y99.747 E-0.21207 ; wipe and retract
G1 X141.092 Y99.747 E-0.54793 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.600 F10800.000 ; lift Z
G1 X138.323 Y99.351 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.599 Y99.351 E1.37084 ; perimeter
G1 X196.452 Y78.497 E1.33650 ; perimeter
G1 X196.521 Y78.100 E0.01662 ; perimeter
G1 X196.517 Y77.692 E0.01679 ; perimeter
G1 X196.433 Y77.315 E0.01592 ; perimeter
G1 X196.333 Y77.073 E0.01078 ; perimeter
G1 X196.129 Y76.764 E0.01525 ; perimeter
G1 X195.123 Y75.565 E0.06451 ; perimeter
G1 X196.238 Y74.629 E0.05995 ; perimeter
G1 X197.393 Y76.007 E0.07408 ; perimeter
G1 X197.613 Y76.314 E0.01554 ; perimeter
G1 X197.839 Y76.781 E0.02139 ; perimeter
G1 X197.940 Y77.137 E0.01526 ; perimeter
G1 X198.004 Y77.694 E0.02308 ; perimeter
G1 X197.990 Y78.069 E0.01544 ; perimeter
G1 X197.933 Y78.435 E0.01528 ; perimeter
G1 X197.872 Y78.691 E0.01082 ; perimeter
G1 X197.751 Y79.048 E0.01555 ; perimeter
G1 X197.522 Y79.535 E0.02217 ; perimeter
G1 X197.331 Y79.849 E0.01512 ; perimeter
G1 X197.040 Y80.235 E0.01993 ; perimeter
G1 X172.221 Y101.060 E1.33468 ; perimeter
G1 X138.320 Y101.060 E1.39659 ; perimeter
G1 X138.323 Y99.411 E0.06794 ; perimeter
M204 S1000 ; adjust acceleration
G1 X138.723 Y99.358 F10800.000 ; move inwards before travel
G1 F8640
G1 X141.614 Y99.405 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.600 F10800.000 ; lift Z
G1 X110.601 Y138.414 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X77.782 Y138.414 E1.35199 ; perimeter
G1 X53.253 Y117.832 E1.31908 ; perimeter
G1 X52.968 Y117.431 E0.02027 ; perimeter
G1 X77.827 Y138.290 E1.33684 ; perimeter
G1 X110.600 Y138.290 E1.35012 ; perimeter
G1 X110.601 Y138.354 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 X110.998 Y138.810 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X77.638 Y138.810 E1.37429 ; perimeter
G1 X52.964 Y118.107 E1.32688 ; perimeter
G1 X52.712 Y117.772 E0.01727 ; perimeter
G1 X52.542 Y117.493 E0.01343 ; perimeter
G1 X52.332 Y117.046 E0.02035 ; perimeter
G1 X52.171 Y116.505 E0.02328 ; perimeter
G1 X52.120 Y116.177 E0.01368 ; perimeter
G1 X52.108 Y115.859 E0.01311 ; perimeter
G1 X52.166 Y115.355 E0.02088 ; perimeter
G1 X52.250 Y115.061 E0.01258 ; perimeter
G1 X52.377 Y114.780 E0.01272 ; perimeter
G1 X52.640 Y114.389 E0.01941 ; perimeter
G1 X53.526 Y113.334 E0.05676 ; perimeter
G1 X54.034 Y113.760 E0.02730 ; perimeter
G1 X53.267 Y114.673 E0.04913 ; perimeter
G1 X53.030 Y115.033 E0.01774 ; perimeter
G1 X52.902 Y115.341 E0.01377 ; perimeter
G1 X52.802 Y115.793 E0.01906 ; perimeter
G1 X52.797 Y116.278 E0.02000 ; perimeter
G1 X52.898 Y116.854 E0.02408 ; perimeter
G1 X77.971 Y137.894 E1.34840 ; perimeter
G1 X110.996 Y137.894 E1.36048 ; perimeter
G1 X110.998 Y138.750 E0.03529 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X107.706 Y138.756 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.600 F10800.000 ; lift Z
G1 X111.392 Y137.497 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X111.395 Y139.207 E0.07041 ; perimeter
G1 X77.494 Y139.207 E1.39659 ; perimeter
G1 X52.675 Y118.381 E1.33468 ; perimeter
G1 X52.384 Y117.995 E0.01993 ; perimeter
G1 X52.193 Y117.681 E0.01512 ; perimeter
G1 X51.964 Y117.194 E0.02217 ; perimeter
G1 X51.843 Y116.837 E0.01555 ; perimeter
G1 X51.782 Y116.581 E0.01082 ; perimeter
G1 X51.725 Y116.215 E0.01528 ; perimeter
G1 X51.711 Y115.843 E0.01531 ; perimeter
G1 X51.776 Y115.277 E0.02348 ; perimeter
G1 X51.877 Y114.925 E0.01510 ; perimeter
G1 X52.030 Y114.586 E0.01529 ; perimeter
G1 X52.323 Y114.150 E0.02165 ; perimeter
G1 X53.477 Y112.775 E0.07395 ; perimeter
G1 X54.592 Y113.711 E0.05995 ; perimeter
G1 X53.585 Y114.910 E0.06451 ; perimeter
G1 X53.382 Y115.219 E0.01525 ; perimeter
G1 X53.281 Y115.461 E0.01078 ; perimeter
G1 X53.198 Y115.838 E0.01592 ; perimeter
G1 X53.194 Y116.246 E0.01679 ; perimeter
G1 X53.263 Y116.644 E0.01662 ; perimeter
G1 X78.116 Y137.497 E1.33650 ; perimeter
G1 X111.332 Y137.497 E1.36837 ; perimeter
M204 S1000 ; adjust acceleration
G1 X111.154 Y137.819 F10800.000 ; move inwards before travel
G1 F8640
G1 X111.395 Y139.207 E-0.39494 ; wipe and retract
G1 X109.814 Y139.207 E-0.36506 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.600 F10800.000 ; lift Z
G1 X60.164 Y111.977 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.445 Y109.694 E0.14626 ; perimeter
G1 X54.996 Y112.613 E0.15696 ; perimeter
G1 X54.488 Y112.187 E0.02729 ; perimeter
G1 X63.485 Y101.465 E0.57663 ; perimeter
G1 X63.993 Y101.891 E0.02729 ; perimeter
G1 X61.544 Y104.809 E0.15696 ; perimeter
G1 X64.264 Y107.091 E0.14626 ; perimeter
G1 X63.920 Y107.501 E0.02205 ; perimeter
G1 X61.200 Y105.219 E0.14626 ; perimeter
G1 X57.789 Y109.284 E0.21861 ; perimeter
G1 X60.508 Y111.566 E0.14626 ; perimeter
G1 X60.203 Y111.931 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.213 Y112.535 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X57.494 Y110.253 E0.14626 ; perimeter
G1 X55.045 Y113.171 E0.15696 ; perimeter
G1 X53.930 Y112.236 E0.05995 ; perimeter
G1 X63.437 Y100.906 E0.60929 ; perimeter
G1 X64.551 Y101.842 E0.05995 ; perimeter
G1 X62.102 Y104.760 E0.15696 ; perimeter
G1 X64.822 Y107.042 E0.14626 ; perimeter
G1 X63.968 Y108.060 E0.05471 ; perimeter
G1 X61.249 Y105.778 E0.14626 ; perimeter
G1 X58.347 Y109.236 E0.18596 ; perimeter
G1 X61.067 Y111.518 E0.14626 ; perimeter
G1 X60.252 Y112.489 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.940 Y112.243 F10800.000 ; move inwards before travel
G1 F8640
G1 X57.695 Y110.416 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.600 F10800.000 ; lift Z
G1 X103.527 Y119.639 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.285 Y119.639 E0.33954 ; perimeter
G1 X86.569 Y112.326 E0.46869 ; perimeter
G1 X81.432 Y112.326 E0.21162 ; perimeter
G1 X67.252 Y100.427 E0.76259 ; perimeter
G1 X67.687 Y100.631 E0.01980 ; perimeter
G1 X81.477 Y112.202 E0.74160 ; perimeter
G1 X86.614 Y112.202 E0.21162 ; perimeter
G1 X95.330 Y119.515 E0.46869 ; perimeter
G1 X103.527 Y119.515 E0.33768 ; perimeter
G1 X103.527 Y119.579 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X100.235 Y119.603 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.600 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.787 Y114.704 E0.19986 ; perimeter
G1 X86.425 Y112.722 E0.12699 ; perimeter
G1 X81.288 Y112.722 E0.21162 ; perimeter
G1 X66.663 Y100.450 E0.78652 ; perimeter
G1 X66.093 Y100.451 E0.02347 ; perimeter
G1 X65.866 Y100.482 E0.00944 ; perimeter
G1 X65.602 Y100.542 E0.01113 ; perimeter
G1 X65.311 Y100.649 E0.01279 ; perimeter
G1 X65.034 Y100.810 E0.01321 ; perimeter
G1 X64.480 Y100.345 E0.02980 ; perimeter
G1 X64.784 Y100.124 E0.01552 ; perimeter
G1 X65.059 Y99.990 E0.01258 ; perimeter
G1 X65.545 Y99.845 E0.02088 ; perimeter
G1 X65.860 Y99.802 E0.01311 ; perimeter
G1 X66.420 Y99.809 E0.02308 ; perimeter
G1 X66.759 Y99.860 E0.01412 ; perimeter
G1 X67.077 Y99.940 E0.01351 ; perimeter
G1 X67.539 Y100.110 E0.02030 ; perimeter
G1 X67.907 Y100.298 E0.01701 ; perimeter
G1 X81.622 Y111.806 E0.73752 ; perimeter
G1 X86.759 Y111.806 E0.21162 ; perimeter
G1 X95.474 Y119.119 E0.46869 ; perimeter
G1 X103.923 Y119.119 E0.34806 ; perimeter
G1 X103.923 Y120.035 E0.03776 ; perimeter
G1 X95.140 Y120.035 E0.36181 ; perimeter
G1 X89.197 Y115.048 E0.31964 ; perimeter
G1 X76.303 Y130.414 E0.82634 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X88.228 Y114.752 E0.16721 ; perimeter
G1 X86.281 Y113.118 E0.10472 ; perimeter
G1 X81.144 Y113.118 E0.21162 ; perimeter
G1 X66.518 Y100.846 E0.78651 ; perimeter
G1 X66.120 Y100.847 E0.01640 ; perimeter
G1 X65.715 Y100.922 E0.01700 ; perimeter
G1 X65.481 Y101.009 E0.01028 ; perimeter
G1 X65.140 Y101.207 E0.01625 ; perimeter
G1 X65.023 Y101.318 E0.00664 ; perimeter
G1 X63.889 Y100.367 E0.06096 ; perimeter
G1 X64.278 Y99.989 E0.02235 ; perimeter
G1 X64.585 Y99.780 E0.01529 ; perimeter
G1 X64.915 Y99.619 E0.01510 ; perimeter
G1 X65.461 Y99.456 E0.02348 ; perimeter
G1 X65.829 Y99.406 E0.01531 ; perimeter
G1 X66.462 Y99.414 E0.02608 ; perimeter
G1 X66.837 Y99.471 E0.01564 ; perimeter
G1 X67.194 Y99.561 E0.01516 ; perimeter
G1 X67.698 Y99.747 E0.02213 ; perimeter
G1 X68.128 Y99.965 E0.01984 ; perimeter
G1 X81.766 Y111.409 E0.73344 ; perimeter
G1 X86.903 Y111.409 E0.21162 ; perimeter
G1 X95.618 Y118.722 E0.46869 ; perimeter
G1 X104.319 Y118.722 E0.35845 ; perimeter
G1 X104.319 Y120.432 E0.07041 ; perimeter
G1 X94.996 Y120.432 E0.38408 ; perimeter
G1 X89.245 Y115.606 E0.30926 ; perimeter
G1 X76.352 Y130.972 E0.82634 ; perimeter
M73 P39 R82
M204 S1000 ; adjust acceleration
G1 X76.222 Y130.629 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.600 F10800.000 ; lift Z
G1 X145.903 Y119.639 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X145.903 Y119.515 E0.00510 ; perimeter
G1 X154.100 Y119.515 E0.33768 ; perimeter
G1 X162.815 Y112.202 E0.46869 ; perimeter
G1 X167.952 Y112.202 E0.21162 ; perimeter
G1 X181.751 Y100.624 E0.74205 ; perimeter
G1 X182.193 Y100.414 E0.02017 ; perimeter
G1 X167.997 Y112.326 E0.76342 ; perimeter
G1 X162.860 Y112.326 E0.21162 ; perimeter
G1 X154.145 Y119.639 E0.46869 ; perimeter
G1 X145.963 Y119.639 E0.33706 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X145.903 Y119.515 E-0.03178 ; wipe and retract
G1 X149.057 Y119.515 E-0.72822 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.600 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.233 Y115.048 E0.82881 ; perimeter
G1 X154.289 Y120.035 E0.31964 ; perimeter
G1 X145.507 Y120.035 E0.36181 ; perimeter
G1 X145.507 Y119.119 E0.03776 ; perimeter
G1 X153.956 Y119.119 E0.34806 ; perimeter
G1 X162.671 Y111.806 E0.46869 ; perimeter
G1 X167.808 Y111.806 E0.21162 ; perimeter
G1 X181.527 Y100.294 E0.73779 ; perimeter
G1 X182.052 Y100.043 E0.02397 ; perimeter
G1 X182.534 Y99.892 E0.02079 ; perimeter
G1 X183.016 Y99.808 E0.02014 ; perimeter
G1 X183.570 Y99.802 E0.02282 ; perimeter
G1 X183.893 Y99.846 E0.01347 ; perimeter
G1 X184.354 Y99.982 E0.01979 ; perimeter
G1 X184.638 Y100.120 E0.01300 ; perimeter
G1 X184.950 Y100.345 E0.01585 ; perimeter
G1 X184.396 Y100.810 E0.02983 ; perimeter
G1 X184.119 Y100.649 E0.01321 ; perimeter
G1 X183.827 Y100.542 E0.01279 ; perimeter
G1 X183.564 Y100.482 E0.01113 ; perimeter
G1 X183.337 Y100.451 E0.00944 ; perimeter
G1 X182.767 Y100.450 E0.02347 ; perimeter
G1 X168.142 Y112.722 E0.78652 ; perimeter
G1 X163.005 Y112.722 E0.21162 ; perimeter
G1 X160.643 Y114.704 E0.12699 ; perimeter
G1 X163.762 Y118.420 E0.19986 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.184 Y115.606 E0.82881 ; perimeter
G1 X154.433 Y120.432 E0.30926 ; perimeter
G1 X145.110 Y120.432 E0.38408 ; perimeter
G1 X145.110 Y118.722 E0.07041 ; perimeter
G1 X153.811 Y118.722 E0.35845 ; perimeter
G1 X162.527 Y111.409 E0.46869 ; perimeter
G1 X167.664 Y111.409 E0.21162 ; perimeter
G1 X181.304 Y99.964 E0.73353 ; perimeter
G1 X181.569 Y99.821 E0.01241 ; perimeter
G1 X181.913 Y99.671 E0.01546 ; perimeter
G1 X182.440 Y99.505 E0.02276 ; perimeter
G1 X182.970 Y99.414 E0.02214 ; perimeter
G1 X183.601 Y99.406 E0.02598 ; perimeter
G1 X183.972 Y99.457 E0.01544 ; perimeter
G1 X184.344 Y99.557 E0.01586 ; perimeter
G1 X184.842 Y99.779 E0.02247 ; perimeter
G1 X185.261 Y100.080 E0.02125 ; perimeter
G1 X185.532 Y100.374 E0.01649 ; perimeter
G1 X184.407 Y101.318 E0.06051 ; perimeter
G1 X184.290 Y101.207 E0.00664 ; perimeter
G1 X183.949 Y101.009 E0.01625 ; perimeter
G1 X183.715 Y100.922 E0.01028 ; perimeter
G1 X183.309 Y100.847 E0.01700 ; perimeter
G1 X182.911 Y100.846 E0.01640 ; perimeter
G1 X168.286 Y113.118 E0.78651 ; perimeter
G1 X163.149 Y113.118 E0.21162 ; perimeter
G1 X161.201 Y114.752 E0.10472 ; perimeter
G1 X163.810 Y117.862 E0.16721 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.464 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.600 F10800.000 ; lift Z
G1 X189.265 Y111.977 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X188.921 Y111.566 E0.02205 ; perimeter
G1 X191.641 Y109.284 E0.14626 ; perimeter
G1 X188.230 Y105.219 E0.21861 ; perimeter
G1 X185.510 Y107.501 E0.14626 ; perimeter
G1 X185.166 Y107.091 E0.02205 ; perimeter
G1 X187.886 Y104.809 E0.14626 ; perimeter
G1 X185.437 Y101.891 E0.15696 ; perimeter
G1 X185.944 Y101.465 E0.02729 ; perimeter
G1 X194.941 Y112.187 E0.57663 ; perimeter
G1 X194.434 Y112.613 E0.02729 ; perimeter
G1 X191.985 Y109.694 E0.15696 ; perimeter
G1 X189.311 Y111.938 E0.14378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.216 Y112.535 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X188.363 Y111.518 E0.05471 ; perimeter
G1 X191.082 Y109.236 E0.14626 ; perimeter
G1 X188.181 Y105.778 E0.18596 ; perimeter
G1 X185.461 Y108.060 E0.14626 ; perimeter
G1 X184.608 Y107.042 E0.05471 ; perimeter
G1 X187.327 Y104.760 E0.14626 ; perimeter
G1 X184.878 Y101.842 E0.15696 ; perimeter
G1 X185.993 Y100.906 E0.05995 ; perimeter
G1 X195.500 Y112.236 E0.60929 ; perimeter
G1 X194.385 Y113.171 E0.05995 ; perimeter
G1 X191.936 Y110.253 E0.15696 ; perimeter
G1 X189.262 Y112.496 E0.14378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.256 Y112.137 F10800.000 ; move inwards before travel
G1 F8640
G1 X188.363 Y111.518 E-0.30695 ; wipe and retract
G1 X189.866 Y110.256 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.600 F10800.000 ; lift Z
G1 X138.829 Y138.414 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X138.829 Y138.290 E0.00510 ; perimeter
G1 X171.603 Y138.290 E1.35012 ; perimeter
G1 X196.461 Y117.431 E1.33684 ; perimeter
G1 X196.176 Y117.832 E0.02027 ; perimeter
G1 X171.648 Y138.414 E1.31908 ; perimeter
G1 X138.889 Y138.414 E1.34952 ; perimeter
M204 S1000 ; adjust acceleration
G1 X138.432 Y138.810 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X138.433 Y137.894 E0.03776 ; perimeter
G1 X171.458 Y137.894 E1.36048 ; perimeter
G1 X196.532 Y116.854 E1.34840 ; perimeter
G1 X196.633 Y116.278 E0.02408 ; perimeter
G1 X196.628 Y115.793 E0.02000 ; perimeter
G1 X196.528 Y115.341 E0.01906 ; perimeter
G1 X196.400 Y115.033 E0.01377 ; perimeter
G1 X196.163 Y114.673 E0.01774 ; perimeter
G1 X195.396 Y113.760 E0.04913 ; perimeter
G1 X195.904 Y113.334 E0.02729 ; perimeter
G1 X196.795 Y114.396 E0.05712 ; perimeter
G1 X196.986 Y114.663 E0.01351 ; perimeter
G1 X197.182 Y115.069 E0.01859 ; perimeter
G1 X197.268 Y115.372 E0.01300 ; perimeter
G1 X197.322 Y115.850 E0.01979 ; perimeter
G1 X197.309 Y116.177 E0.01347 ; perimeter
G1 X197.259 Y116.505 E0.01368 ; perimeter
G1 X197.098 Y117.046 E0.02328 ; perimeter
G1 X196.887 Y117.493 E0.02035 ; perimeter
G1 X196.718 Y117.772 E0.01343 ; perimeter
G1 X196.466 Y118.107 E0.01727 ; perimeter
G1 X171.792 Y138.810 E1.32688 ; perimeter
G1 X138.492 Y138.810 E1.37182 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X138.433 Y137.894 E-0.21207 ; wipe and retract
G1 X140.806 Y137.894 E-0.54793 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.600 F10800.000 ; lift Z
G1 X138.038 Y137.497 ; move to first perimeter point
G1 Z8.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.314 Y137.497 E1.37084 ; perimeter
G1 X196.167 Y116.644 E1.33650 ; perimeter
G1 X196.236 Y116.246 E0.01662 ; perimeter
G1 X196.232 Y115.838 E0.01679 ; perimeter
G1 X196.148 Y115.461 E0.01592 ; perimeter
G1 X196.048 Y115.219 E0.01078 ; perimeter
G1 X195.844 Y114.910 E0.01525 ; perimeter
G1 X194.838 Y113.711 E0.06451 ; perimeter
G1 X195.952 Y112.775 E0.05995 ; perimeter
G1 X197.108 Y114.153 E0.07408 ; perimeter
G1 X197.328 Y114.460 E0.01554 ; perimeter
G1 X197.553 Y114.927 E0.02139 ; perimeter
G1 X197.655 Y115.284 E0.01526 ; perimeter
G1 X197.719 Y115.840 E0.02308 ; perimeter
G1 X197.705 Y116.215 E0.01544 ; perimeter
G1 X197.648 Y116.581 E0.01528 ; perimeter
G1 X197.587 Y116.837 E0.01082 ; perimeter
G1 X197.466 Y117.194 E0.01555 ; perimeter
G1 X197.237 Y117.681 E0.02217 ; perimeter
G1 X197.046 Y117.995 E0.01512 ; perimeter
G1 X196.755 Y118.381 E0.01993 ; perimeter
G1 X171.936 Y139.207 E1.33468 ; perimeter
G1 X138.035 Y139.207 E1.39659 ; perimeter
G1 X138.038 Y137.557 E0.06794 ; perimeter
M204 S1000 ; adjust acceleration
G1 X138.438 Y137.504 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;8.25


G1 F8640
G1 X141.329 Y137.551 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;8.25
G1 X110.214 Y100.342 ; move to first perimeter point
G1 Z8.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.255 Y100.342 E1.06940 ; perimeter
G1 X84.255 Y100.443 E0.00417 ; perimeter
G1 X79.940 Y100.443 E0.17774 ; perimeter
G1 X79.940 Y100.342 E0.00417 ; perimeter
G1 X78.040 Y100.342 E0.07827 ; perimeter
G1 X53.930 Y80.111 E1.29658 ; perimeter
G1 X53.629 Y79.829 E0.01698 ; perimeter
G1 X78.049 Y100.319 E1.31319 ; perimeter
M73 Q40 S83
G1 X110.176 Y100.319 E1.32352 ; perimeter
M204 S1000 ; adjust acceleration
G1 X110.612 Y100.738 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E1.06950 ; perimeter
G1 X84.651 Y100.839 E0.00417 ; perimeter
G1 X79.544 Y100.839 E0.21040 ; perimeter
G1 X79.544 Y100.738 E0.00417 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X53.669 Y80.409 E1.30286 ; perimeter
G1 X53.400 Y80.164 E0.01499 ; perimeter
G1 X53.176 Y79.924 E0.01353 ; perimeter
G1 X52.963 Y79.656 E0.01409 ; perimeter
G1 X52.692 Y79.231 E0.02077 ; perimeter
G1 X52.484 Y78.791 E0.02006 ; perimeter
G1 X52.379 Y78.478 E0.01362 ; perimeter
G1 X52.271 Y77.912 E0.02372 ; perimeter
G1 X52.259 Y77.597 E0.01298 ; perimeter
G1 X52.316 Y77.101 E0.02058 ; perimeter
G1 X52.402 Y76.802 E0.01281 ; perimeter
G1 X52.531 Y76.516 E0.01291 ; perimeter
G1 X52.791 Y76.131 E0.01917 ; perimeter
G1 X53.677 Y75.075 E0.05678 ; perimeter
G1 X54.185 Y75.501 E0.02729 ; perimeter
G1 X53.424 Y76.408 E0.04877 ; perimeter
G1 X53.246 Y76.662 E0.01278 ; perimeter
G1 X53.115 Y76.928 E0.01222 ; perimeter
G1 X53.010 Y77.231 E0.01318 ; perimeter
G1 X52.954 Y77.542 E0.01305 ; perimeter
G1 X52.942 Y77.844 E0.01244 ; perimeter
G1 X52.989 Y78.300 E0.01890 ; perimeter
G1 X53.181 Y78.935 E0.02734 ; perimeter
G1 X78.193 Y99.923 E1.34505 ; perimeter
G1 X110.607 Y99.923 E1.33534 ; perimeter
G1 X110.612 Y100.678 E0.03112 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X107.321 Y100.686 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.850 F10800.000 ; lift Z
G1 X111.001 Y99.526 ; move to first perimeter point
G1 Z8.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X111.011 Y101.134 E0.06625 ; perimeter
G1 X85.047 Y101.134 E1.06959 ; perimeter
G1 X85.047 Y101.235 E0.00417 ; perimeter
G1 X79.147 Y101.235 E0.24305 ; perimeter
G1 X79.147 Y101.134 E0.00417 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X53.408 Y80.707 E1.30914 ; perimeter
G1 X53.121 Y80.446 E0.01598 ; perimeter
G1 X52.876 Y80.183 E0.01483 ; perimeter
G1 X52.640 Y79.887 E0.01559 ; perimeter
G1 X52.344 Y79.423 E0.02267 ; perimeter
G1 X52.116 Y78.939 E0.02204 ; perimeter
G1 X51.994 Y78.578 E0.01568 ; perimeter
G1 X51.876 Y77.957 E0.02606 ; perimeter
G1 X51.862 Y77.582 E0.01545 ; perimeter
G1 X51.926 Y77.023 E0.02317 ; perimeter
G1 X52.028 Y76.665 E0.01534 ; perimeter
G1 X52.184 Y76.322 E0.01550 ; perimeter
G1 X52.474 Y75.892 E0.02140 ; perimeter
G1 X53.628 Y74.517 E0.07396 ; perimeter
G1 X54.743 Y75.452 E0.05995 ; perimeter
G1 X53.739 Y76.649 E0.06438 ; perimeter
G1 X53.588 Y76.864 E0.01081 ; perimeter
G1 X53.482 Y77.081 E0.00996 ; perimeter
G1 X53.395 Y77.331 E0.01091 ; perimeter
G1 X53.349 Y77.585 E0.01064 ; perimeter
G1 X53.339 Y77.832 E0.01015 ; perimeter
G1 X53.379 Y78.222 E0.01616 ; perimeter
G1 X53.526 Y78.708 E0.02091 ; perimeter
G1 X78.337 Y99.526 E1.33425 ; perimeter
G1 X110.941 Y99.526 E1.34316 ; perimeter
M204 S1000 ; adjust acceleration
G1 X110.764 Y99.848 F10800.000 ; move inwards before travel
G1 F8640
G1 X111.011 Y101.134 E-0.37166 ; wipe and retract
G1 X109.329 Y101.134 E-0.38834 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.850 F10800.000 ; lift Z
G1 X60.310 Y73.714 ; move to first perimeter point
G1 Z8.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.596 Y71.436 E0.14599 ; perimeter
G1 X55.147 Y74.354 E0.15696 ; perimeter
G1 X54.639 Y73.929 E0.02729 ; perimeter
G1 X63.637 Y63.206 E0.57663 ; perimeter
G1 X64.144 Y63.632 E0.02729 ; perimeter
G1 X61.695 Y66.550 E0.15696 ; perimeter
G1 X64.410 Y68.828 E0.14599 ; perimeter
G1 X64.066 Y69.238 E0.02205 ; perimeter
G1 X61.351 Y66.961 E0.14599 ; perimeter
G1 X57.940 Y71.026 E0.21861 ; perimeter
G1 X60.655 Y73.304 E0.14599 ; perimeter
G1 X60.349 Y73.668 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.359 Y74.272 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X57.645 Y71.994 E0.14599 ; perimeter
G1 X55.196 Y74.913 E0.15696 ; perimeter
G1 X54.081 Y73.977 E0.05995 ; perimeter
G1 X63.588 Y62.648 E0.60929 ; perimeter
G1 X64.702 Y63.583 E0.05995 ; perimeter
G1 X62.253 Y66.502 E0.15696 ; perimeter
G1 X64.968 Y68.779 E0.14599 ; perimeter
G1 X64.114 Y69.797 E0.05471 ; perimeter
G1 X61.400 Y67.519 E0.14599 ; perimeter
G1 X58.498 Y70.977 E0.18596 ; perimeter
G1 X61.213 Y73.255 E0.14599 ; perimeter
G1 X60.398 Y74.226 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.086 Y73.980 F10800.000 ; move inwards before travel
G1 F8640
G1 X57.841 Y72.153 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.850 F10800.000 ; lift Z
G1 X103.562 Y81.318 ; move to first perimeter point
G1 Z8.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.634 Y81.318 E0.32661 ; perimeter
G1 X86.918 Y74.005 E0.46869 ; perimeter
G1 X81.781 Y74.005 E0.21162 ; perimeter
G1 X68.147 Y62.564 E0.73320 ; perimeter
G1 X68.458 Y62.796 E0.01598 ; perimeter
G1 X81.789 Y73.982 E0.71691 ; perimeter
G1 X86.926 Y73.982 E0.21162 ; perimeter
G1 X95.642 Y81.295 E0.46869 ; perimeter
G1 X97.847 Y81.295 E0.09085 ; perimeter
G1 X97.847 Y81.194 E0.00417 ; perimeter
G1 X103.562 Y81.194 E0.23542 ; perimeter
G1 X103.562 Y81.258 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X100.271 Y81.283 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.850 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z8.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X89.184 Y76.423 E0.20708 ; perimeter
G1 X86.774 Y74.401 E0.12962 ; perimeter
G1 X81.637 Y74.401 E0.21162 ; perimeter
G1 X67.183 Y62.272 E0.77732 ; perimeter
G1 X66.739 Y62.199 E0.01851 ; perimeter
G1 X66.220 Y62.194 E0.02137 ; perimeter
G1 X65.769 Y62.277 E0.01892 ; perimeter
G1 X65.463 Y62.390 E0.01345 ; perimeter
G1 X65.181 Y62.548 E0.01330 ; perimeter
G1 X64.631 Y62.086 E0.02958 ; perimeter
G1 X64.935 Y61.865 E0.01549 ; perimeter
G1 X65.214 Y61.730 E0.01281 ; perimeter
G1 X65.693 Y61.587 E0.02058 ; perimeter
G1 X66.015 Y61.543 E0.01337 ; perimeter
G1 X66.567 Y61.550 E0.02273 ; perimeter
G1 X66.908 Y61.601 E0.01422 ; perimeter
G1 X67.383 Y61.731 E0.02029 ; perimeter
G1 X67.700 Y61.855 E0.01402 ; perimeter
G1 X67.973 Y61.989 E0.01253 ; perimeter
G1 X68.433 Y62.275 E0.02233 ; perimeter
G1 X68.707 Y62.487 E0.01426 ; perimeter
G1 X81.934 Y73.586 E0.71129 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y80.797 E0.00417 ; perimeter
G1 X103.958 Y80.797 E0.26807 ; perimeter
G1 X103.958 Y81.714 E0.03776 ; perimeter
G1 X95.489 Y81.714 E0.34888 ; perimeter
G1 X89.594 Y76.767 E0.31702 ; perimeter
G1 X76.588 Y92.268 E0.83355 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X88.626 Y76.472 E0.17442 ; perimeter
G1 X86.630 Y74.797 E0.10735 ; perimeter
G1 X81.493 Y74.797 E0.21162 ; perimeter
G1 X67.011 Y62.646 E0.77879 ; perimeter
G1 X66.697 Y62.594 E0.01311 ; perimeter
G1 X66.459 Y62.582 E0.00980 ; perimeter
G1 X66.264 Y62.589 E0.00805 ; perimeter
G1 X65.874 Y62.661 E0.01633 ; perimeter
G1 X65.629 Y62.752 E0.01079 ; perimeter
G1 X65.397 Y62.880 E0.01091 ; perimeter
G1 X65.169 Y63.056 E0.01185 ; perimeter
G1 X64.040 Y62.108 E0.06073 ; perimeter
G1 X64.425 Y61.734 E0.02211 ; perimeter
G1 X64.735 Y61.522 E0.01550 ; perimeter
G1 X65.070 Y61.359 E0.01534 ; perimeter
G1 X65.609 Y61.198 E0.02317 ; perimeter
G1 X65.984 Y61.147 E0.01560 ; perimeter
G1 X66.608 Y61.155 E0.02570 ; perimeter
G1 X66.990 Y61.213 E0.01590 ; perimeter
G1 X67.508 Y61.354 E0.02213 ; perimeter
G1 X67.860 Y61.492 E0.01557 ; perimeter
G1 X68.165 Y61.642 E0.01402 ; perimeter
G1 X68.660 Y61.950 E0.02399 ; perimeter
G1 X68.956 Y62.178 E0.01541 ; perimeter
G1 X82.078 Y73.189 E0.70568 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y80.401 E0.00417 ; perimeter
G1 X104.355 Y80.401 E0.30073 ; perimeter
G1 X104.355 Y82.110 E0.07041 ; perimeter
G1 X95.345 Y82.110 E0.37115 ; perimeter
G1 X89.643 Y77.326 E0.30663 ; perimeter
G1 X76.637 Y92.826 E0.83355 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.507 Y92.483 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.850 F10800.000 ; lift Z
G1 X146.438 Y81.318 ; move to first perimeter point
G1 Z8.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X146.438 Y81.194 E0.00510 ; perimeter
G1 X152.153 Y81.194 E0.23542 ; perimeter
G1 X152.153 Y81.295 E0.00417 ; perimeter
G1 X154.358 Y81.295 E0.09085 ; perimeter
G1 X163.074 Y73.982 E0.46869 ; perimeter
G1 X168.211 Y73.982 E0.21162 ; perimeter
G1 X181.541 Y62.796 E0.71689 ; perimeter
G1 X181.871 Y62.549 E0.01698 ; perimeter
G1 X168.219 Y74.005 E0.73418 ; perimeter
G1 X163.082 Y74.005 E0.21162 ; perimeter
G1 X154.366 Y81.318 E0.46869 ; perimeter
G1 X146.498 Y81.318 E0.32414 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X146.438 Y81.194 E-0.03178 ; wipe and retract
G1 X149.592 Y81.194 E-0.72822 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.850 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z8.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.406 Y76.767 E0.83602 ; perimeter
G1 X154.511 Y81.714 E0.31702 ; perimeter
G1 X146.042 Y81.714 E0.34888 ; perimeter
G1 X146.042 Y80.797 E0.03776 ; perimeter
G1 X152.549 Y80.797 E0.26807 ; perimeter
G1 X152.549 Y80.899 E0.00417 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X181.293 Y62.487 E0.71128 ; perimeter
G1 X181.581 Y62.265 E0.01500 ; perimeter
G1 X181.856 Y62.086 E0.01353 ; perimeter
G1 X182.162 Y61.920 E0.01432 ; perimeter
G1 X182.485 Y61.779 E0.01455 ; perimeter
G1 X183.087 Y61.602 E0.02584 ; perimeter
G1 X183.419 Y61.552 E0.01383 ; perimeter
G1 X183.995 Y61.544 E0.02372 ; perimeter
G1 X184.315 Y61.588 E0.01331 ; perimeter
G1 X184.769 Y61.722 E0.01951 ; perimeter
G1 X185.059 Y61.862 E0.01325 ; perimeter
G1 X185.370 Y62.086 E0.01579 ; perimeter
G1 X184.819 Y62.548 E0.02960 ; perimeter
G1 X184.537 Y62.390 E0.01330 ; perimeter
G1 X184.231 Y62.277 E0.01345 ; perimeter
G1 X183.780 Y62.194 E0.01892 ; perimeter
G1 X183.261 Y62.199 E0.02137 ; perimeter
G1 X182.817 Y62.272 E0.01851 ; perimeter
G1 X168.363 Y74.401 E0.77732 ; perimeter
G1 X163.226 Y74.401 E0.21162 ; perimeter
G1 X160.816 Y76.423 E0.12962 ; perimeter
G1 X164.047 Y80.274 E0.20708 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.357 Y77.326 E0.83602 ; perimeter
G1 X154.655 Y82.110 E0.30663 ; perimeter
G1 X145.645 Y82.110 E0.37115 ; perimeter
G1 X145.645 Y80.401 E0.07041 ; perimeter
G1 X152.945 Y80.401 E0.30073 ; perimeter
G1 X152.945 Y80.502 E0.00417 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X181.044 Y62.178 E0.70568 ; perimeter
G1 X181.351 Y61.941 E0.01598 ; perimeter
G1 X181.653 Y61.745 E0.01483 ; perimeter
G1 X181.987 Y61.563 E0.01568 ; perimeter
G1 X182.342 Y61.409 E0.01593 ; perimeter
G1 X182.641 Y61.307 E0.01301 ; perimeter
G1 X183.008 Y61.213 E0.01563 ; perimeter
G1 X183.387 Y61.156 E0.01576 ; perimeter
G1 X184.019 Y61.148 E0.02606 ; perimeter
G1 X184.394 Y61.199 E0.01557 ; perimeter
G1 X184.771 Y61.301 E0.01612 ; perimeter
G1 X185.262 Y61.521 E0.02216 ; perimeter
G1 X185.676 Y61.818 E0.02100 ; perimeter
G1 X185.951 Y62.115 E0.01668 ; perimeter
G1 X184.831 Y63.056 E0.06027 ; perimeter
G1 X184.603 Y62.880 E0.01185 ; perimeter
G1 X184.371 Y62.752 E0.01091 ; perimeter
G1 X184.126 Y62.661 E0.01079 ; perimeter
G1 X183.736 Y62.589 E0.01633 ; perimeter
G1 X183.541 Y62.582 E0.00805 ; perimeter
G1 X183.303 Y62.594 E0.00980 ; perimeter
G1 X182.989 Y62.646 E0.01311 ; perimeter
G1 X168.507 Y74.797 E0.77879 ; perimeter
G1 X163.370 Y74.797 E0.21162 ; perimeter
G1 X161.374 Y76.472 E0.10735 ; perimeter
G1 X164.096 Y79.716 E0.17442 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.850 F10800.000 ; lift Z
G1 X189.690 Y73.714 ; move to first perimeter point
G1 Z8.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X189.345 Y73.304 E0.02205 ; perimeter
G1 X192.060 Y71.026 E0.14599 ; perimeter
G1 X188.649 Y66.961 E0.21861 ; perimeter
G1 X185.934 Y69.238 E0.14599 ; perimeter
G1 X185.590 Y68.828 E0.02205 ; perimeter
G1 X188.305 Y66.550 E0.14599 ; perimeter
G1 X185.856 Y63.632 E0.15696 ; perimeter
G1 X186.363 Y63.206 E0.02729 ; perimeter
G1 X195.361 Y73.929 E0.57663 ; perimeter
G1 X194.853 Y74.354 E0.02729 ; perimeter
G1 X192.404 Y71.436 E0.15696 ; perimeter
G1 X189.736 Y73.675 E0.14351 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.641 Y74.272 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X188.787 Y73.255 E0.05471 ; perimeter
G1 X191.502 Y70.977 E0.14599 ; perimeter
G1 X188.600 Y67.519 E0.18596 ; perimeter
G1 X185.886 Y69.797 E0.14599 ; perimeter
G1 X185.032 Y68.779 E0.05471 ; perimeter
G1 X187.747 Y66.502 E0.14599 ; perimeter
G1 X185.298 Y63.583 E0.15696 ; perimeter
G1 X186.412 Y62.648 E0.05995 ; perimeter
G1 X195.919 Y73.977 E0.60929 ; perimeter
G1 X194.804 Y74.913 E0.05995 ; perimeter
G1 X192.355 Y71.994 E0.15696 ; perimeter
G1 X189.687 Y74.233 E0.14351 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.680 Y73.874 F10800.000 ; move inwards before travel
G1 F8640
G1 X188.787 Y73.255 E-0.30695 ; wipe and retract
G1 X190.290 Y71.994 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.850 F10800.000 ; lift Z
G1 X139.786 Y100.342 ; move to first perimeter point
G1 Z8.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X139.786 Y100.319 E0.00093 ; perimeter
G1 X171.951 Y100.319 E1.32506 ; perimeter
G1 X196.336 Y79.858 E1.31132 ; perimeter
G1 X196.062 Y80.117 E0.01551 ; perimeter
G1 X171.960 Y100.342 E1.29618 ; perimeter
G1 X170.060 Y100.342 E0.07827 ; perimeter
G1 X170.060 Y100.443 E0.00417 ; perimeter
G1 X165.745 Y100.443 E0.17774 ; perimeter
G1 X165.745 Y100.342 E0.00417 ; perimeter
G1 X139.846 Y100.342 E1.06692 ; perimeter
M73 P40 R80
M204 S1000 ; adjust acceleration
G1 X139.388 Y100.738 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X139.393 Y99.923 E0.03359 ; perimeter
G1 X171.807 Y99.923 E1.33534 ; perimeter
G1 X196.819 Y78.935 E1.34505 ; perimeter
G1 X197.011 Y78.300 E0.02734 ; perimeter
G1 X197.058 Y77.844 E0.01890 ; perimeter
G1 X197.046 Y77.542 E0.01244 ; perimeter
G1 X196.990 Y77.230 E0.01305 ; perimeter
G1 X196.885 Y76.928 E0.01318 ; perimeter
G1 X196.754 Y76.662 E0.01222 ; perimeter
G1 X196.576 Y76.408 E0.01278 ; perimeter
G1 X195.815 Y75.501 E0.04877 ; perimeter
G1 X196.323 Y75.075 E0.02729 ; perimeter
G1 X197.214 Y76.137 E0.05711 ; perimeter
G1 X197.407 Y76.408 E0.01370 ; perimeter
G1 X197.600 Y76.809 E0.01834 ; perimeter
G1 X197.686 Y77.108 E0.01281 ; perimeter
G1 X197.732 Y77.440 E0.01383 ; perimeter
G1 X197.728 Y77.927 E0.02005 ; perimeter
G1 X197.624 Y78.469 E0.02273 ; perimeter
G1 X197.514 Y78.796 E0.01420 ; perimeter
G1 X197.375 Y79.103 E0.01389 ; perimeter
G1 X197.150 Y79.493 E0.01854 ; perimeter
G1 X196.944 Y79.779 E0.01455 ; perimeter
G1 X196.719 Y80.041 E0.01419 ; perimeter
G1 X196.326 Y80.413 E0.02230 ; perimeter
G1 X172.104 Y100.738 E1.30261 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y100.839 E0.00417 ; perimeter
G1 X165.349 Y100.839 E0.21040 ; perimeter
G1 X165.349 Y100.738 E0.00417 ; perimeter
G1 X139.448 Y100.738 E1.06702 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X139.393 Y99.923 E-0.18870 ; wipe and retract
G1 X141.867 Y99.923 E-0.57130 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.850 F10800.000 ; lift Z
G1 X138.999 Y99.526 ; move to first perimeter point
G1 Z8.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.663 Y99.526 E1.34563 ; perimeter
G1 X196.474 Y78.708 E1.33425 ; perimeter
G1 X196.621 Y78.222 E0.02091 ; perimeter
G1 X196.661 Y77.832 E0.01616 ; perimeter
G1 X196.651 Y77.585 E0.01015 ; perimeter
G1 X196.605 Y77.331 E0.01064 ; perimeter
G1 X196.518 Y77.081 E0.01091 ; perimeter
G1 X196.412 Y76.864 E0.00996 ; perimeter
G1 X196.261 Y76.649 E0.01081 ; perimeter
G1 X195.257 Y75.452 E0.06438 ; perimeter
G1 X196.372 Y74.517 E0.05995 ; perimeter
G1 X197.528 Y75.894 E0.07408 ; perimeter
G1 X197.750 Y76.205 E0.01574 ; perimeter
G1 X197.972 Y76.668 E0.02114 ; perimeter
G1 X198.074 Y77.026 E0.01534 ; perimeter
G1 X198.138 Y77.576 E0.02283 ; perimeter
G1 X198.123 Y77.962 E0.01591 ; perimeter
G1 X198.007 Y78.575 E0.02570 ; perimeter
G1 X197.883 Y78.941 E0.01589 ; perimeter
G1 X197.728 Y79.284 E0.01553 ; perimeter
G1 X197.483 Y79.708 E0.02017 ; perimeter
G1 X197.256 Y80.025 E0.01606 ; perimeter
G1 X197.007 Y80.314 E0.01574 ; perimeter
G1 X196.590 Y80.709 E0.02363 ; perimeter
G1 X172.248 Y101.134 E1.30905 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y101.235 E0.00417 ; perimeter
G1 X164.953 Y101.235 E0.24306 ; perimeter
G1 X164.953 Y101.134 E0.00417 ; perimeter
G1 X138.989 Y101.134 E1.06959 ; perimeter
G1 X138.998 Y99.586 E0.06378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X139.399 Y99.534 F10800.000 ; move inwards before travel
G1 F8640
G1 X142.290 Y99.580 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.850 F10800.000 ; lift Z
G1 X109.928 Y138.488 ; move to first perimeter point
G1 Z8.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X83.970 Y138.488 E1.06940 ; perimeter
G1 X83.970 Y138.589 E0.00417 ; perimeter
G1 X79.655 Y138.589 E0.17774 ; perimeter
G1 X79.655 Y138.488 E0.00417 ; perimeter
G1 X77.755 Y138.488 E0.07827 ; perimeter
G1 X53.645 Y118.257 E1.29658 ; perimeter
G1 X53.344 Y117.975 E0.01698 ; perimeter
G1 X77.763 Y138.465 E1.31319 ; perimeter
G1 X109.891 Y138.465 E1.32352 ; perimeter
M204 S1000 ; adjust acceleration
G1 X110.327 Y138.884 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E1.06950 ; perimeter
G1 X84.366 Y138.985 E0.00417 ; perimeter
G1 X79.259 Y138.985 E0.21040 ; perimeter
G1 X79.259 Y138.884 E0.00417 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X53.384 Y118.555 E1.30286 ; perimeter
G1 X53.115 Y118.310 E0.01499 ; perimeter
G1 X52.891 Y118.070 E0.01353 ; perimeter
G1 X52.678 Y117.803 E0.01409 ; perimeter
G1 X52.407 Y117.377 E0.02077 ; perimeter
G1 X52.199 Y116.937 E0.02006 ; perimeter
G1 X52.094 Y116.624 E0.01362 ; perimeter
G1 X51.986 Y116.058 E0.02372 ; perimeter
G1 X51.974 Y115.743 E0.01298 ; perimeter
G1 X52.031 Y115.247 E0.02058 ; perimeter
G1 X52.116 Y114.948 E0.01281 ; perimeter
G1 X52.246 Y114.663 E0.01291 ; perimeter
G1 X52.506 Y114.277 E0.01917 ; perimeter
G1 X53.392 Y113.221 E0.05678 ; perimeter
G1 X53.900 Y113.647 E0.02729 ; perimeter
G1 X53.139 Y114.554 E0.04877 ; perimeter
G1 X52.961 Y114.808 E0.01278 ; perimeter
G1 X52.830 Y115.074 E0.01222 ; perimeter
G1 X52.725 Y115.377 E0.01318 ; perimeter
G1 X52.669 Y115.688 E0.01305 ; perimeter
G1 X52.657 Y115.990 E0.01244 ; perimeter
G1 X52.703 Y116.446 E0.01890 ; perimeter
G1 X52.896 Y117.082 E0.02734 ; perimeter
G1 X77.908 Y138.069 E1.34505 ; perimeter
G1 X110.322 Y138.069 E1.33534 ; perimeter
G1 X110.327 Y138.824 E0.03112 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X107.035 Y138.832 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.850 F10800.000 ; lift Z
G1 X110.716 Y137.672 ; move to first perimeter point
G1 Z8.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X110.726 Y139.280 E0.06625 ; perimeter
G1 X84.762 Y139.280 E1.06959 ; perimeter
G1 X84.762 Y139.382 E0.00417 ; perimeter
G1 X78.862 Y139.382 E0.24305 ; perimeter
G1 X78.862 Y139.280 E0.00417 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X53.123 Y118.854 E1.30914 ; perimeter
G1 X52.836 Y118.592 E0.01598 ; perimeter
G1 X52.590 Y118.329 E0.01483 ; perimeter
G1 X52.355 Y118.033 E0.01559 ; perimeter
G1 X52.059 Y117.569 E0.02267 ; perimeter
G1 X51.831 Y117.085 E0.02204 ; perimeter
G1 X51.709 Y116.724 E0.01568 ; perimeter
G1 X51.591 Y116.103 E0.02606 ; perimeter
G1 X51.577 Y115.728 E0.01545 ; perimeter
G1 X51.641 Y115.169 E0.02317 ; perimeter
G1 X51.743 Y114.811 E0.01534 ; perimeter
G1 X51.898 Y114.469 E0.01550 ; perimeter
G1 X52.189 Y114.038 E0.02140 ; perimeter
G1 X53.343 Y112.663 E0.07396 ; perimeter
G1 X54.458 Y113.598 E0.05995 ; perimeter
G1 X53.453 Y114.795 E0.06438 ; perimeter
G1 X53.303 Y115.010 E0.01081 ; perimeter
G1 X53.196 Y115.227 E0.00996 ; perimeter
G1 X53.110 Y115.477 E0.01091 ; perimeter
G1 X53.064 Y115.732 E0.01064 ; perimeter
G1 X53.054 Y115.978 E0.01015 ; perimeter
G1 X53.094 Y116.368 E0.01616 ; perimeter
G1 X53.241 Y116.854 E0.02091 ; perimeter
G1 X78.052 Y137.672 E1.33425 ; perimeter
G1 X110.656 Y137.672 E1.34316 ; perimeter
M204 S1000 ; adjust acceleration
G1 X110.479 Y137.994 F10800.000 ; move inwards before travel
G1 F8640
G1 X110.726 Y139.280 E-0.37166 ; wipe and retract
G1 X109.044 Y139.280 E-0.38834 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.850 F10800.000 ; lift Z
G1 X60.025 Y111.860 ; move to first perimeter point
G1 Z8.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.311 Y109.582 E0.14599 ; perimeter
G1 X54.862 Y112.501 E0.15696 ; perimeter
G1 X54.354 Y112.075 E0.02729 ; perimeter
G1 X63.351 Y101.352 E0.57663 ; perimeter
G1 X63.859 Y101.778 E0.02729 ; perimeter
G1 X61.410 Y104.697 E0.15696 ; perimeter
G1 X64.125 Y106.974 E0.14599 ; perimeter
G1 X63.780 Y107.385 E0.02205 ; perimeter
G1 X61.066 Y105.107 E0.14599 ; perimeter
G1 X57.655 Y109.172 E0.21861 ; perimeter
G1 X60.369 Y111.450 E0.14599 ; perimeter
G1 X60.064 Y111.814 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.074 Y112.418 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X57.359 Y110.140 E0.14599 ; perimeter
G1 X54.910 Y113.059 E0.15696 ; perimeter
G1 X53.796 Y112.124 E0.05995 ; perimeter
G1 X63.303 Y100.794 E0.60929 ; perimeter
G1 X64.417 Y101.729 E0.05995 ; perimeter
G1 X61.968 Y104.648 E0.15696 ; perimeter
G1 X64.683 Y106.926 E0.14599 ; perimeter
G1 X63.829 Y107.943 E0.05471 ; perimeter
G1 X61.115 Y105.665 E0.14599 ; perimeter
G1 X58.213 Y109.123 E0.18596 ; perimeter
G1 X60.928 Y111.401 E0.14599 ; perimeter
G1 X60.113 Y112.372 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.801 Y112.126 F10800.000 ; move inwards before travel
G1 F8640
G1 X57.556 Y110.299 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.850 F10800.000 ; lift Z
G1 X103.277 Y119.464 ; move to first perimeter point
G1 Z8.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.348 Y119.464 E0.32661 ; perimeter
G1 X86.633 Y112.151 E0.46869 ; perimeter
G1 X81.496 Y112.151 E0.21162 ; perimeter
G1 X67.862 Y100.710 E0.73320 ; perimeter
G1 X68.173 Y100.942 E0.01598 ; perimeter
G1 X81.504 Y112.128 E0.71691 ; perimeter
G1 X86.641 Y112.128 E0.21162 ; perimeter
G1 X95.357 Y119.441 E0.46869 ; perimeter
G1 X97.562 Y119.441 E0.09085 ; perimeter
G1 X97.562 Y119.340 E0.00417 ; perimeter
G1 X103.277 Y119.340 E0.23542 ; perimeter
G1 X103.277 Y119.404 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X99.985 Y119.429 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.850 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z8.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.899 Y114.570 E0.20708 ; perimeter
G1 X86.489 Y112.547 E0.12962 ; perimeter
G1 X81.352 Y112.547 E0.21162 ; perimeter
G1 X66.897 Y100.418 E0.77732 ; perimeter
G1 X66.454 Y100.345 E0.01851 ; perimeter
G1 X65.935 Y100.340 E0.02137 ; perimeter
G1 X65.484 Y100.424 E0.01892 ; perimeter
G1 X65.177 Y100.536 E0.01345 ; perimeter
G1 X64.895 Y100.694 E0.01330 ; perimeter
G1 X64.345 Y100.232 E0.02958 ; perimeter
G1 X64.650 Y100.012 E0.01549 ; perimeter
G1 X64.929 Y99.876 E0.01281 ; perimeter
G1 X65.408 Y99.733 E0.02058 ; perimeter
G1 X65.730 Y99.689 E0.01337 ; perimeter
G1 X66.281 Y99.696 E0.02273 ; perimeter
G1 X66.623 Y99.748 E0.01422 ; perimeter
G1 X67.098 Y99.877 E0.02029 ; perimeter
G1 X67.415 Y100.002 E0.01402 ; perimeter
G1 X67.688 Y100.135 E0.01253 ; perimeter
G1 X68.148 Y100.422 E0.02233 ; perimeter
G1 X68.422 Y100.633 E0.01426 ; perimeter
G1 X81.649 Y111.732 E0.71129 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
M73 Q40 S82
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y118.944 E0.00417 ; perimeter
G1 X103.673 Y118.944 E0.26807 ; perimeter
G1 X103.673 Y119.860 E0.03776 ; perimeter
G1 X95.204 Y119.860 E0.34888 ; perimeter
G1 X89.309 Y114.914 E0.31702 ; perimeter
G1 X76.303 Y130.414 E0.83355 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X88.341 Y114.618 E0.17442 ; perimeter
G1 X86.345 Y112.943 E0.10735 ; perimeter
G1 X81.208 Y112.943 E0.21162 ; perimeter
G1 X66.726 Y100.792 E0.77879 ; perimeter
G1 X66.412 Y100.740 E0.01311 ; perimeter
G1 X66.174 Y100.728 E0.00980 ; perimeter
G1 X65.979 Y100.735 E0.00805 ; perimeter
G1 X65.589 Y100.807 E0.01633 ; perimeter
G1 X65.343 Y100.898 E0.01079 ; perimeter
G1 X65.112 Y101.027 E0.01091 ; perimeter
G1 X64.884 Y101.202 E0.01185 ; perimeter
G1 X63.755 Y100.254 E0.06073 ; perimeter
G1 X64.140 Y99.880 E0.02211 ; perimeter
G1 X64.450 Y99.668 E0.01550 ; perimeter
G1 X64.785 Y99.505 E0.01534 ; perimeter
G1 X65.324 Y99.344 E0.02317 ; perimeter
G1 X65.699 Y99.293 E0.01560 ; perimeter
G1 X66.323 Y99.301 E0.02570 ; perimeter
G1 X66.705 Y99.359 E0.01590 ; perimeter
G1 X67.223 Y99.500 E0.02213 ; perimeter
G1 X67.574 Y99.639 E0.01557 ; perimeter
G1 X67.880 Y99.788 E0.01402 ; perimeter
G1 X68.375 Y100.096 E0.02399 ; perimeter
G1 X68.671 Y100.324 E0.01541 ; perimeter
G1 X81.793 Y111.335 E0.70568 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y118.547 E0.00417 ; perimeter
G1 X104.069 Y118.547 E0.30073 ; perimeter
G1 X104.069 Y120.256 E0.07041 ; perimeter
G1 X95.060 Y120.256 E0.37115 ; perimeter
G1 X89.358 Y115.472 E0.30663 ; perimeter
G1 X76.352 Y130.972 E0.83355 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.221 Y130.629 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.850 F10800.000 ; lift Z
G1 X146.153 Y119.464 ; move to first perimeter point
G1 Z8.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X146.153 Y119.340 E0.00510 ; perimeter
G1 X151.868 Y119.340 E0.23542 ; perimeter
G1 X151.868 Y119.441 E0.00417 ; perimeter
G1 X154.073 Y119.441 E0.09085 ; perimeter
G1 X162.788 Y112.128 E0.46869 ; perimeter
G1 X167.925 Y112.128 E0.21162 ; perimeter
G1 X181.256 Y100.942 E0.71689 ; perimeter
G1 X181.586 Y100.695 E0.01698 ; perimeter
G1 X167.934 Y112.151 E0.73418 ; perimeter
G1 X162.797 Y112.151 E0.21162 ; perimeter
G1 X154.081 Y119.464 E0.46869 ; perimeter
G1 X146.213 Y119.464 E0.32414 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X146.153 Y119.340 E-0.03178 ; wipe and retract
G1 X149.307 Y119.340 E-0.72822 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.850 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z8.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.120 Y114.914 E0.83602 ; perimeter
G1 X154.225 Y119.860 E0.31702 ; perimeter
G1 X145.757 Y119.860 E0.34888 ; perimeter
G1 X145.757 Y118.944 E0.03776 ; perimeter
G1 X152.264 Y118.944 E0.26807 ; perimeter
G1 X152.264 Y119.045 E0.00417 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X181.008 Y100.633 E0.71128 ; perimeter
G1 X181.296 Y100.411 E0.01500 ; perimeter
G1 X181.571 Y100.232 E0.01353 ; perimeter
G1 X181.876 Y100.066 E0.01432 ; perimeter
G1 X182.200 Y99.925 E0.01455 ; perimeter
G1 X182.802 Y99.748 E0.02584 ; perimeter
G1 X183.134 Y99.698 E0.01383 ; perimeter
G1 X183.710 Y99.691 E0.02372 ; perimeter
G1 X184.030 Y99.734 E0.01331 ; perimeter
G1 X184.484 Y99.868 E0.01951 ; perimeter
G1 X184.773 Y100.008 E0.01325 ; perimeter
G1 X185.085 Y100.232 E0.01579 ; perimeter
G1 X184.534 Y100.694 E0.02960 ; perimeter
G1 X184.252 Y100.536 E0.01330 ; perimeter
G1 X183.946 Y100.424 E0.01345 ; perimeter
G1 X183.494 Y100.340 E0.01892 ; perimeter
G1 X182.975 Y100.345 E0.02137 ; perimeter
G1 X182.532 Y100.418 E0.01851 ; perimeter
G1 X168.078 Y112.547 E0.77732 ; perimeter
G1 X162.941 Y112.547 E0.21162 ; perimeter
G1 X160.531 Y114.570 E0.12962 ; perimeter
G1 X163.762 Y118.420 E0.20708 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.072 Y115.472 E0.83602 ; perimeter
G1 X154.370 Y120.256 E0.30663 ; perimeter
G1 X145.360 Y120.256 E0.37115 ; perimeter
G1 X145.360 Y118.547 E0.07041 ; perimeter
G1 X152.660 Y118.547 E0.30073 ; perimeter
G1 X152.660 Y118.648 E0.00417 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X180.759 Y100.325 E0.70568 ; perimeter
G1 X181.066 Y100.088 E0.01598 ; perimeter
G1 X181.368 Y99.891 E0.01483 ; perimeter
G1 X181.702 Y99.709 E0.01568 ; perimeter
G1 X182.057 Y99.555 E0.01593 ; perimeter
G1 X182.355 Y99.453 E0.01301 ; perimeter
G1 X182.723 Y99.359 E0.01563 ; perimeter
G1 X183.101 Y99.302 E0.01576 ; perimeter
G1 X183.734 Y99.294 E0.02606 ; perimeter
G1 X184.109 Y99.345 E0.01557 ; perimeter
G1 X184.486 Y99.447 E0.01612 ; perimeter
G1 X184.977 Y99.667 E0.02216 ; perimeter
G1 X185.391 Y99.964 E0.02100 ; perimeter
G1 X185.666 Y100.262 E0.01668 ; perimeter
G1 X184.545 Y101.202 E0.06027 ; perimeter
G1 X184.317 Y101.027 E0.01185 ; perimeter
G1 X184.086 Y100.898 E0.01091 ; perimeter
G1 X183.840 Y100.807 E0.01079 ; perimeter
G1 X183.451 Y100.735 E0.01633 ; perimeter
G1 X183.256 Y100.728 E0.00805 ; perimeter
G1 X183.018 Y100.740 E0.00980 ; perimeter
G1 X182.704 Y100.792 E0.01311 ; perimeter
G1 X168.222 Y112.943 E0.77879 ; perimeter
G1 X163.085 Y112.943 E0.21162 ; perimeter
G1 X161.089 Y114.618 E0.10735 ; perimeter
G1 X163.810 Y117.862 E0.17442 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.464 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.850 F10800.000 ; lift Z
G1 X189.404 Y111.860 ; move to first perimeter point
G1 Z8.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X189.060 Y111.450 E0.02205 ; perimeter
G1 X191.775 Y109.172 E0.14599 ; perimeter
G1 X188.364 Y105.107 E0.21861 ; perimeter
G1 X185.649 Y107.385 E0.14599 ; perimeter
G1 X185.305 Y106.974 E0.02205 ; perimeter
G1 X188.020 Y104.697 E0.14599 ; perimeter
G1 X185.571 Y101.778 E0.15696 ; perimeter
G1 X186.078 Y101.352 E0.02729 ; perimeter
G1 X195.076 Y112.075 E0.57663 ; perimeter
G1 X194.568 Y112.501 E0.02729 ; perimeter
G1 X192.119 Y109.582 E0.15696 ; perimeter
G1 X189.450 Y111.821 E0.14351 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.356 Y112.418 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X188.502 Y111.401 E0.05471 ; perimeter
G1 X191.217 Y109.123 E0.14599 ; perimeter
G1 X188.315 Y105.665 E0.18596 ; perimeter
G1 X185.600 Y107.943 E0.14599 ; perimeter
G1 X184.747 Y106.926 E0.05471 ; perimeter
G1 X187.461 Y104.648 E0.14599 ; perimeter
G1 X185.012 Y101.729 E0.15696 ; perimeter
G1 X186.127 Y100.794 E0.05995 ; perimeter
G1 X195.634 Y112.124 E0.60929 ; perimeter
G1 X194.519 Y113.059 E0.05995 ; perimeter
G1 X192.070 Y110.140 E0.15696 ; perimeter
G1 X189.401 Y112.380 E0.14351 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.395 Y112.020 F10800.000 ; move inwards before travel
G1 F8640
G1 X188.502 Y111.401 E-0.30695 ; wipe and retract
G1 X190.005 Y110.140 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.850 F10800.000 ; lift Z
G1 X139.501 Y138.488 ; move to first perimeter point
G1 Z8.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X139.501 Y138.465 E0.00093 ; perimeter
G1 X171.666 Y138.465 E1.32506 ; perimeter
G1 X196.051 Y118.004 E1.31132 ; perimeter
G1 X195.777 Y118.263 E0.01551 ; perimeter
G1 X171.675 Y138.488 E1.29618 ; perimeter
G1 X169.775 Y138.488 E0.07827 ; perimeter
G1 X169.775 Y138.589 E0.00417 ; perimeter
G1 X165.460 Y138.589 E0.17774 ; perimeter
G1 X165.460 Y138.488 E0.00417 ; perimeter
G1 X139.561 Y138.488 E1.06692 ; perimeter
M204 S1000 ; adjust acceleration
G1 X139.102 Y138.884 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X139.107 Y138.069 E0.03359 ; perimeter
G1 X171.522 Y138.069 E1.33534 ; perimeter
G1 X196.533 Y117.082 E1.34505 ; perimeter
G1 X196.726 Y116.446 E0.02734 ; perimeter
G1 X196.773 Y115.990 E0.01890 ; perimeter
G1 X196.761 Y115.688 E0.01244 ; perimeter
G1 X196.705 Y115.377 E0.01305 ; perimeter
G1 X196.600 Y115.074 E0.01318 ; perimeter
G1 X196.469 Y114.808 E0.01222 ; perimeter
G1 X196.291 Y114.554 E0.01278 ; perimeter
G1 X195.530 Y113.647 E0.04877 ; perimeter
G1 X196.038 Y113.221 E0.02729 ; perimeter
G1 X196.929 Y114.283 E0.05711 ; perimeter
G1 X197.122 Y114.554 E0.01370 ; perimeter
G1 X197.315 Y114.955 E0.01834 ; perimeter
G1 X197.400 Y115.254 E0.01281 ; perimeter
G1 X197.447 Y115.587 E0.01383 ; perimeter
G1 X197.443 Y116.073 E0.02005 ; perimeter
G1 X197.339 Y116.615 E0.02273 ; perimeter
G1 X197.229 Y116.942 E0.01420 ; perimeter
G1 X197.090 Y117.249 E0.01389 ; perimeter
G1 X196.865 Y117.639 E0.01854 ; perimeter
G1 X196.659 Y117.926 E0.01455 ; perimeter
G1 X196.434 Y118.187 E0.01419 ; perimeter
G1 X196.041 Y118.559 E0.02230 ; perimeter
G1 X171.819 Y138.884 E1.30261 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y138.985 E0.00417 ; perimeter
G1 X165.064 Y138.985 E0.21040 ; perimeter
G1 X165.064 Y138.884 E0.00417 ; perimeter
G1 X139.162 Y138.884 E1.06702 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X139.107 Y138.069 E-0.18870 ; wipe and retract
G1 X141.582 Y138.069 E-0.57130 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.850 F10800.000 ; lift Z
G1 X138.713 Y137.672 ; move to first perimeter point
G1 Z8.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.378 Y137.672 E1.34563 ; perimeter
G1 X196.188 Y116.854 E1.33425 ; perimeter
G1 X196.336 Y116.368 E0.02091 ; perimeter
G1 X196.376 Y115.978 E0.01616 ; perimeter
G1 X196.366 Y115.732 E0.01015 ; perimeter
G1 X196.320 Y115.477 E0.01064 ; perimeter
G1 X196.233 Y115.227 E0.01091 ; perimeter
G1 X196.127 Y115.010 E0.00996 ; perimeter
G1 X195.976 Y114.795 E0.01081 ; perimeter
G1 X194.972 Y113.598 E0.06438 ; perimeter
G1 X196.086 Y112.663 E0.05995 ; perimeter
G1 X197.242 Y114.040 E0.07408 ; perimeter
G1 X197.464 Y114.351 E0.01574 ; perimeter
G1 X197.687 Y114.814 E0.02114 ; perimeter
G1 X197.789 Y115.172 E0.01534 ; perimeter
G1 X197.853 Y115.722 E0.02283 ; perimeter
G1 X197.838 Y116.108 E0.01591 ; perimeter
G1 X197.721 Y116.721 E0.02570 ; perimeter
G1 X197.598 Y117.087 E0.01589 ; perimeter
G1 X197.443 Y117.431 E0.01553 ; perimeter
G1 X197.198 Y117.854 E0.02017 ; perimeter
G1 X196.970 Y118.171 E0.01606 ; perimeter
G1 X196.721 Y118.461 E0.01574 ; perimeter
G1 X196.305 Y118.855 E0.02363 ; perimeter
G1 X171.963 Y139.280 E1.30905 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y139.382 E0.00417 ; perimeter
G1 X164.667 Y139.382 E0.24306 ; perimeter
G1 X164.667 Y139.280 E0.00417 ; perimeter
G1 X138.704 Y139.280 E1.06959 ; perimeter
G1 X138.713 Y137.732 E0.06378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X139.113 Y137.681 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;8.5


G1 F8640
G1 X142.004 Y137.726 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z8.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;8.5
G1 X84.255 Y100.618 ; move to first perimeter point
G1 Z8.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.940 Y100.618 E0.17774 ; perimeter
G1 X79.940 Y100.494 E0.00510 ; perimeter
G1 X84.255 Y100.494 E0.17774 ; perimeter
G1 X84.255 Y100.558 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.964 Y100.604 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.100 F10800.000 ; lift Z
G1 X109.972 Y100.738 ; move to first perimeter point
G1 Z8.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E1.04311 ; perimeter
G1 X84.651 Y101.014 E0.01138 ; perimeter
G1 X79.544 Y101.014 E0.21040 ; perimeter
G1 X79.544 Y100.738 E0.01138 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X53.535 Y80.297 E1.31006 ; perimeter
G1 X53.260 Y80.045 E0.01537 ; perimeter
G1 X53.049 Y79.819 E0.01275 ; perimeter
G1 X52.829 Y79.545 E0.01446 ; perimeter
G1 X52.559 Y79.121 E0.02072 ; perimeter
G1 X52.351 Y78.681 E0.02002 ; perimeter
G1 X52.243 Y78.360 E0.01396 ; perimeter
G1 X52.138 Y77.804 E0.02334 ; perimeter
G1 X52.125 Y77.481 E0.01328 ; perimeter
G1 X52.181 Y76.993 E0.02027 ; perimeter
G1 X52.268 Y76.688 E0.01303 ; perimeter
G1 X52.399 Y76.399 E0.01310 ; perimeter
G1 X52.657 Y76.019 E0.01892 ; perimeter
G1 X53.543 Y74.963 E0.05679 ; perimeter
G1 X54.051 Y75.388 E0.02730 ; perimeter
G1 X53.284 Y76.302 E0.04911 ; perimeter
G1 X53.049 Y76.657 E0.01758 ; perimeter
G1 X52.914 Y76.985 E0.01461 ; perimeter
G1 X52.822 Y77.416 E0.01814 ; perimeter
G1 X52.807 Y77.629 E0.00880 ; perimeter
G1 X52.842 Y78.118 E0.02018 ; perimeter
G1 X52.993 Y78.656 E0.02303 ; perimeter
G1 X53.150 Y78.992 E0.01529 ; perimeter
G1 X53.329 Y79.288 E0.01424 ; perimeter
G1 X78.129 Y100.098 E1.33368 ; perimeter
G1 X109.969 Y100.098 E1.31165 ; perimeter
G1 X109.972 Y100.678 E0.02391 ; perimeter
M204 S1000 ; adjust acceleration
G1 X110.370 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E1.04320 ; perimeter
G1 X85.047 Y101.411 E0.01138 ; perimeter
G1 X79.147 Y101.411 E0.24305 ; perimeter
G1 X79.147 Y101.134 E0.01138 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X53.274 Y80.595 E1.31634 ; perimeter
G1 X52.981 Y80.327 E0.01636 ; perimeter
G1 X52.748 Y80.078 E0.01402 ; perimeter
G1 X52.507 Y79.776 E0.01596 ; perimeter
G1 X52.211 Y79.313 E0.02263 ; perimeter
G1 X51.983 Y78.830 E0.02201 ; perimeter
G1 X51.859 Y78.461 E0.01603 ; perimeter
G1 X51.743 Y77.849 E0.02567 ; perimeter
G1 X51.728 Y77.466 E0.01575 ; perimeter
G1 X51.791 Y76.915 E0.02286 ; perimeter
G1 X51.895 Y76.552 E0.01558 ; perimeter
G1 X52.052 Y76.205 E0.01570 ; perimeter
G1 X52.340 Y75.780 E0.02115 ; perimeter
G1 X53.494 Y74.404 E0.07396 ; perimeter
G1 X54.609 Y75.340 E0.05995 ; perimeter
G1 X53.603 Y76.539 E0.06450 ; perimeter
G1 X53.401 Y76.844 E0.01506 ; perimeter
G1 X53.294 Y77.103 E0.01156 ; perimeter
G1 X53.215 Y77.471 E0.01548 ; perimeter
G1 X53.205 Y77.628 E0.00650 ; perimeter
G1 X53.234 Y78.050 E0.01740 ; perimeter
G1 X53.365 Y78.517 E0.02001 ; perimeter
G1 X53.500 Y78.805 E0.01308 ; perimeter
G1 X53.634 Y79.027 E0.01068 ; perimeter
G1 X78.273 Y99.701 E1.32502 ; perimeter
G1 X110.363 Y99.701 E1.32195 ; perimeter
G1 X110.370 Y101.074 E0.05656 ; perimeter
M204 S1000 ; adjust acceleration
G1 X109.971 Y101.128 F10800.000 ; move inwards before travel
G1 F8640
G1 X107.079 Y101.082 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.100 F10800.000 ; lift Z
G1 X60.171 Y73.597 ; move to first perimeter point
G1 Z8.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.462 Y71.323 E0.14571 ; perimeter
G1 X55.013 Y74.242 E0.15696 ; perimeter
G1 X54.505 Y73.816 E0.02729 ; perimeter
G1 X63.502 Y63.093 E0.57663 ; perimeter
G1 X64.010 Y63.519 E0.02729 ; perimeter
G1 X61.561 Y66.438 E0.15696 ; perimeter
G1 X64.271 Y68.712 E0.14571 ; perimeter
G1 X63.926 Y69.122 E0.02205 ; perimeter
G1 X61.217 Y66.848 E0.14571 ; perimeter
G1 X57.806 Y70.913 E0.21861 ; perimeter
G1 X60.515 Y73.187 E0.14571 ; perimeter
G1 X60.210 Y73.551 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.220 Y74.155 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X57.511 Y71.882 E0.14571 ; perimeter
G1 X55.062 Y74.800 E0.15696 ; perimeter
G1 X53.947 Y73.865 E0.05995 ; perimeter
G1 X63.454 Y62.535 E0.60929 ; perimeter
G1 X64.568 Y63.470 E0.05995 ; perimeter
G1 X62.119 Y66.389 E0.15696 ; perimeter
G1 X64.829 Y68.663 E0.14571 ; perimeter
G1 X63.975 Y69.680 E0.05471 ; perimeter
G1 X61.266 Y67.406 E0.14571 ; perimeter
G1 X58.364 Y70.864 E0.18596 ; perimeter
M73 P41 R79
G1 X61.074 Y73.138 E0.14571 ; perimeter
G1 X60.259 Y74.109 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.947 Y73.863 F10800.000 ; move inwards before travel
G1 F8640
G1 X57.702 Y72.037 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.100 F10800.000 ; lift Z
G1 X103.312 Y81.143 ; move to first perimeter point
G1 Z8.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.143 E0.22512 ; perimeter
G1 X97.847 Y81.019 E0.00510 ; perimeter
G1 X103.312 Y81.019 E0.22512 ; perimeter
G1 X103.312 Y81.083 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 X103.708 Y81.539 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.553 Y81.539 E0.33596 ; perimeter
G1 X86.838 Y74.226 E0.46869 ; perimeter
G1 X81.701 Y74.226 E0.21162 ; perimeter
G1 X67.534 Y62.339 E0.76183 ; perimeter
G1 X66.994 Y62.155 E0.02350 ; perimeter
G1 X66.605 Y62.086 E0.01629 ; perimeter
G1 X66.297 Y62.072 E0.01270 ; perimeter
G1 X65.935 Y62.102 E0.01495 ; perimeter
G1 X65.622 Y62.168 E0.01320 ; perimeter
G1 X65.205 Y62.338 E0.01856 ; perimeter
G1 X65.049 Y62.437 E0.00761 ; perimeter
G1 X64.496 Y61.973 E0.02971 ; perimeter
G1 X64.800 Y61.753 E0.01545 ; perimeter
G1 X65.084 Y61.615 E0.01303 ; perimeter
G1 X65.556 Y61.475 E0.02027 ; perimeter
G1 X65.884 Y61.430 E0.01364 ; perimeter
G1 X66.427 Y61.437 E0.02238 ; perimeter
G1 X66.777 Y61.490 E0.01456 ; perimeter
G1 X67.251 Y61.619 E0.02023 ; perimeter
G1 X67.831 Y61.873 E0.02611 ; perimeter
G1 X68.305 Y62.168 E0.02300 ; perimeter
G1 X68.573 Y62.375 E0.01393 ; perimeter
G1 X81.934 Y73.586 E0.71851 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y80.622 E0.01138 ; perimeter
G1 X103.708 Y80.622 E0.25777 ; perimeter
G1 X103.708 Y81.479 E0.03529 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X100.417 Y81.503 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.100 F10800.000 ; lift Z
G1 X95.930 Y80.502 ; move to first perimeter point
G1 Z8.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y80.226 E0.01138 ; perimeter
G1 X104.105 Y80.226 E0.29043 ; perimeter
G1 X104.105 Y81.935 E0.07041 ; perimeter
G1 X95.409 Y81.935 E0.35823 ; perimeter
G1 X86.693 Y74.622 E0.46869 ; perimeter
G1 X81.556 Y74.622 E0.21162 ; perimeter
G1 X67.336 Y62.690 E0.76472 ; perimeter
G1 X66.895 Y62.540 E0.01919 ; perimeter
G1 X66.561 Y62.481 E0.01397 ; perimeter
G1 X66.305 Y62.469 E0.01059 ; perimeter
G1 X65.993 Y62.495 E0.01288 ; perimeter
G1 X65.738 Y62.549 E0.01072 ; perimeter
G1 X65.387 Y62.692 E0.01563 ; perimeter
G1 X65.150 Y62.842 E0.01156 ; perimeter
G1 X65.039 Y62.947 E0.00626 ; perimeter
G1 X63.906 Y61.996 E0.06095 ; perimeter
G1 X64.286 Y61.625 E0.02186 ; perimeter
G1 X64.600 Y61.410 E0.01570 ; perimeter
G1 X64.941 Y61.245 E0.01558 ; perimeter
G1 X65.472 Y61.086 E0.02286 ; perimeter
G1 X65.854 Y61.034 E0.01588 ; perimeter
G1 X66.469 Y61.042 E0.02533 ; perimeter
G1 X66.859 Y61.101 E0.01625 ; perimeter
G1 X67.376 Y61.242 E0.02208 ; perimeter
G1 X67.736 Y61.385 E0.01594 ; perimeter
G1 X68.024 Y61.526 E0.01320 ; perimeter
G1 X68.532 Y61.842 E0.02466 ; perimeter
G1 X68.822 Y62.066 E0.01508 ; perimeter
G1 X82.078 Y73.189 E0.71289 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.884 Y80.464 E0.46622 ; perimeter
M204 S1000 ; adjust acceleration
G1 X96.072 Y80.876 F10800.000 ; move inwards before travel
G1 F8640
G1 X97.055 Y80.502 E-0.27035 ; wipe and retract
G1 X97.055 Y80.226 E-0.06378 ; wipe and retract
G1 X98.899 Y80.226 E-0.42587 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.100 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z8.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.100 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z8.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.100 F10800.000 ; lift Z
G1 X146.688 Y81.143 ; move to first perimeter point
G1 Z8.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X146.688 Y81.019 E0.00510 ; perimeter
G1 X152.153 Y81.019 E0.22512 ; perimeter
G1 X152.153 Y81.143 E0.00510 ; perimeter
G1 X146.748 Y81.143 E0.22265 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.292 Y81.539 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X146.292 Y80.622 E0.03776 ; perimeter
G1 X152.549 Y80.622 E0.25777 ; perimeter
G1 X152.549 Y80.899 E0.01138 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X181.427 Y62.375 E0.71848 ; perimeter
G1 X181.722 Y62.147 E0.01537 ; perimeter
G1 X181.982 Y61.979 E0.01275 ; perimeter
G1 X182.294 Y61.808 E0.01468 ; perimeter
G1 X182.626 Y61.664 E0.01490 ; perimeter
G1 X183.218 Y61.490 E0.02543 ; perimeter
G1 X183.558 Y61.439 E0.01415 ; perimeter
G1 X184.125 Y61.432 E0.02334 ; perimeter
G1 X184.451 Y61.476 E0.01358 ; perimeter
G1 X184.772 Y61.563 E0.01369 ; perimeter
G1 X185.202 Y61.756 E0.01940 ; perimeter
G1 X185.504 Y61.973 E0.01534 ; perimeter
G1 X184.951 Y62.437 E0.02973 ; perimeter
G1 X184.795 Y62.338 E0.00761 ; perimeter
G1 X184.378 Y62.168 E0.01856 ; perimeter
G1 X184.065 Y62.102 E0.01320 ; perimeter
G1 X183.703 Y62.072 E0.01494 ; perimeter
G1 X183.395 Y62.086 E0.01270 ; perimeter
G1 X183.006 Y62.155 E0.01629 ; perimeter
G1 X182.466 Y62.339 E0.02350 ; perimeter
G1 X168.299 Y74.226 E0.76183 ; perimeter
G1 X163.162 Y74.226 E0.21162 ; perimeter
G1 X154.447 Y81.539 E0.46869 ; perimeter
G1 X146.352 Y81.539 E0.33349 ; perimeter
M204 S1000 ; adjust acceleration
G1 X145.895 Y81.935 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X145.895 Y80.226 E0.07041 ; perimeter
G1 X152.945 Y80.226 E0.29043 ; perimeter
G1 X152.945 Y80.502 E0.01138 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X181.178 Y62.066 E0.71288 ; perimeter
G1 X181.493 Y61.824 E0.01636 ; perimeter
G1 X181.778 Y61.638 E0.01402 ; perimeter
G1 X182.120 Y61.452 E0.01604 ; perimeter
G1 X182.483 Y61.294 E0.01630 ; perimeter
G1 X182.763 Y61.198 E0.01221 ; perimeter
G1 X183.139 Y61.101 E0.01600 ; perimeter
G1 X183.526 Y61.043 E0.01610 ; perimeter
G1 X184.149 Y61.035 E0.02568 ; perimeter
G1 X184.530 Y61.087 E0.01586 ; perimeter
G1 X184.906 Y61.189 E0.01604 ; perimeter
G1 X185.400 Y61.411 E0.02232 ; perimeter
G1 X185.807 Y61.702 E0.02062 ; perimeter
G1 X186.085 Y62.003 E0.01688 ; perimeter
G1 X184.961 Y62.947 E0.06048 ; perimeter
G1 X184.850 Y62.842 E0.00626 ; perimeter
G1 X184.613 Y62.692 E0.01156 ; perimeter
G1 X184.262 Y62.549 E0.01563 ; perimeter
G1 X184.007 Y62.495 E0.01072 ; perimeter
G1 X183.695 Y62.469 E0.01288 ; perimeter
G1 X183.439 Y62.481 E0.01059 ; perimeter
G1 X183.105 Y62.540 E0.01397 ; perimeter
G1 X182.664 Y62.690 E0.01919 ; perimeter
G1 X168.444 Y74.622 E0.76472 ; perimeter
G1 X163.307 Y74.622 E0.21162 ; perimeter
G1 X154.591 Y81.935 E0.46869 ; perimeter
G1 X145.955 Y81.935 E0.35576 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.048 Y81.565 F10800.000 ; move inwards before travel
G1 F8640
G1 X145.895 Y80.226 E-0.39492 ; wipe and retract
G1 X147.476 Y80.226 E-0.36508 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.100 F10800.000 ; lift Z
G1 X189.829 Y73.597 ; move to first perimeter point
G1 Z8.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X189.485 Y73.187 E0.02205 ; perimeter
G1 X192.194 Y70.913 E0.14571 ; perimeter
G1 X188.783 Y66.848 E0.21861 ; perimeter
G1 X186.074 Y69.122 E0.14571 ; perimeter
G1 X185.729 Y68.712 E0.02205 ; perimeter
G1 X188.439 Y66.438 E0.14571 ; perimeter
G1 X185.990 Y63.519 E0.15696 ; perimeter
G1 X186.498 Y63.093 E0.02729 ; perimeter
G1 X195.495 Y73.816 E0.57663 ; perimeter
G1 X194.987 Y74.242 E0.02729 ; perimeter
G1 X192.538 Y71.323 E0.15696 ; perimeter
G1 X189.875 Y73.558 E0.14324 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.780 Y74.155 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X188.926 Y73.138 E0.05471 ; perimeter
G1 X191.636 Y70.864 E0.14571 ; perimeter
G1 X188.734 Y67.406 E0.18596 ; perimeter
G1 X186.025 Y69.680 E0.14571 ; perimeter
G1 X185.171 Y68.663 E0.05471 ; perimeter
G1 X187.881 Y66.389 E0.14571 ; perimeter
G1 X185.432 Y63.470 E0.15696 ; perimeter
G1 X186.546 Y62.535 E0.05995 ; perimeter
G1 X196.053 Y73.865 E0.60929 ; perimeter
G1 X194.938 Y74.800 E0.05995 ; perimeter
M73 Q41 S81
G1 X192.489 Y71.882 E0.15696 ; perimeter
G1 X189.826 Y74.117 E0.14324 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.820 Y73.757 F10800.000 ; move inwards before travel
G1 F8640
G1 X188.926 Y73.138 E-0.30695 ; wipe and retract
G1 X190.429 Y71.877 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.100 F10800.000 ; lift Z
G1 X165.745 Y100.618 ; move to first perimeter point
G1 Z8.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y100.494 E0.00510 ; perimeter
G1 X170.060 Y100.494 E0.17774 ; perimeter
G1 X170.060 Y100.618 E0.00510 ; perimeter
G1 X165.805 Y100.618 E0.17527 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y100.494 E-0.03178 ; wipe and retract
G1 X168.899 Y100.494 E-0.72822 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.100 F10800.000 ; lift Z
G1 X140.028 Y100.738 ; move to first perimeter point
G1 Z8.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X140.031 Y100.098 E0.02638 ; perimeter
G1 X171.871 Y100.098 E1.31165 ; perimeter
G1 X196.671 Y79.288 E1.33368 ; perimeter
G1 X196.850 Y78.992 E0.01424 ; perimeter
G1 X197.007 Y78.656 E0.01529 ; perimeter
G1 X197.158 Y78.118 E0.02303 ; perimeter
G1 X197.193 Y77.629 E0.02018 ; perimeter
G1 X197.178 Y77.416 E0.00880 ; perimeter
G1 X197.086 Y76.985 E0.01814 ; perimeter
G1 X196.951 Y76.657 E0.01461 ; perimeter
G1 X196.716 Y76.302 E0.01758 ; perimeter
G1 X195.949 Y75.388 E0.04911 ; perimeter
G1 X196.457 Y74.963 E0.02729 ; perimeter
G1 X197.348 Y76.024 E0.05710 ; perimeter
G1 X197.544 Y76.299 E0.01390 ; perimeter
G1 X197.734 Y76.695 E0.01810 ; perimeter
G1 X197.821 Y76.999 E0.01303 ; perimeter
G1 X197.867 Y77.339 E0.01411 ; perimeter
G1 X197.862 Y77.819 E0.01978 ; perimeter
G1 X197.759 Y78.352 E0.02238 ; perimeter
G1 X197.647 Y78.686 E0.01449 ; perimeter
G1 X197.504 Y79.001 E0.01426 ; perimeter
G1 X197.293 Y79.366 E0.01737 ; perimeter
G1 X197.082 Y79.661 E0.01495 ; perimeter
G1 X196.853 Y79.929 E0.01452 ; perimeter
G1 X196.460 Y80.300 E0.02225 ; perimeter
G1 X172.104 Y100.738 E1.30983 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y101.014 E0.01138 ; perimeter
G1 X165.349 Y101.014 E0.21040 ; perimeter
G1 X165.349 Y100.738 E0.01138 ; perimeter
G1 X140.088 Y100.738 E1.04064 ; perimeter
M204 S1000 ; adjust acceleration
G1 X139.630 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X139.637 Y99.701 E0.05904 ; perimeter
G1 X171.727 Y99.701 E1.32195 ; perimeter
G1 X196.366 Y79.027 E1.32502 ; perimeter
G1 X196.500 Y78.805 E0.01068 ; perimeter
G1 X196.635 Y78.517 E0.01308 ; perimeter
G1 X196.766 Y78.050 E0.02001 ; perimeter
G1 X196.795 Y77.628 E0.01740 ; perimeter
G1 X196.785 Y77.471 E0.00650 ; perimeter
G1 X196.706 Y77.103 E0.01548 ; perimeter
G1 X196.599 Y76.844 E0.01156 ; perimeter
G1 X196.397 Y76.539 E0.01506 ; perimeter
G1 X195.391 Y75.340 E0.06451 ; perimeter
G1 X196.506 Y74.404 E0.05995 ; perimeter
G1 X197.662 Y75.782 E0.07407 ; perimeter
G1 X197.886 Y76.097 E0.01594 ; perimeter
G1 X198.106 Y76.554 E0.02090 ; perimeter
G1 X198.209 Y76.918 E0.01558 ; perimeter
G1 X198.272 Y77.461 E0.02253 ; perimeter
G1 X198.257 Y77.854 E0.01621 ; perimeter
G1 X198.142 Y78.458 E0.02533 ; perimeter
G1 X198.016 Y78.831 E0.01622 ; perimeter
G1 X197.857 Y79.183 E0.01590 ; perimeter
G1 X197.626 Y79.581 E0.01895 ; perimeter
G1 X197.394 Y79.906 E0.01645 ; perimeter
G1 X197.140 Y80.203 E0.01610 ; perimeter
G1 X196.724 Y80.596 E0.02358 ; perimeter
G1 X172.248 Y101.134 E1.31626 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y101.411 E0.01138 ; perimeter
G1 X164.953 Y101.411 E0.24306 ; perimeter
G1 X164.953 Y101.134 E0.01138 ; perimeter
G1 X139.690 Y101.134 E1.04073 ; perimeter
M204 S1000 ; adjust acceleration
G1 X139.832 Y100.789 F10800.000 ; move inwards before travel
G1 F8640
G1 X139.637 Y99.701 E-0.33111 ; wipe and retract
G1 X141.495 Y99.701 E-0.42889 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.100 F10800.000 ; lift Z
G1 X83.970 Y138.764 ; move to first perimeter point
G1 Z8.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.655 Y138.764 E0.17774 ; perimeter
G1 X79.655 Y138.640 E0.00510 ; perimeter
G1 X83.970 Y138.640 E0.17774 ; perimeter
G1 X83.970 Y138.704 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.678 Y138.750 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.100 F10800.000 ; lift Z
G1 X109.687 Y138.884 ; move to first perimeter point
G1 Z8.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E1.04311 ; perimeter
G1 X84.366 Y139.160 E0.01138 ; perimeter
G1 X79.259 Y139.160 E0.21040 ; perimeter
G1 X79.259 Y138.884 E0.01138 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X53.250 Y118.443 E1.31006 ; perimeter
G1 X52.975 Y118.191 E0.01537 ; perimeter
G1 X52.763 Y117.965 E0.01275 ; perimeter
G1 X52.544 Y117.691 E0.01446 ; perimeter
G1 X52.274 Y117.267 E0.02072 ; perimeter
G1 X52.066 Y116.827 E0.02002 ; perimeter
G1 X51.958 Y116.506 E0.01396 ; perimeter
G1 X51.852 Y115.950 E0.02334 ; perimeter
G1 X51.840 Y115.628 E0.01328 ; perimeter
G1 X51.896 Y115.139 E0.02027 ; perimeter
G1 X51.983 Y114.835 E0.01303 ; perimeter
G1 X52.114 Y114.545 E0.01310 ; perimeter
G1 X52.372 Y114.165 E0.01892 ; perimeter
G1 X53.258 Y113.109 E0.05679 ; perimeter
G1 X53.765 Y113.535 E0.02730 ; perimeter
G1 X52.999 Y114.448 E0.04911 ; perimeter
G1 X52.764 Y114.804 E0.01758 ; perimeter
G1 X52.629 Y115.132 E0.01461 ; perimeter
G1 X52.536 Y115.562 E0.01814 ; perimeter
G1 X52.522 Y115.775 E0.00880 ; perimeter
G1 X52.556 Y116.264 E0.02018 ; perimeter
G1 X52.707 Y116.802 E0.02303 ; perimeter
G1 X52.865 Y117.138 E0.01529 ; perimeter
G1 X53.044 Y117.434 E0.01424 ; perimeter
G1 X77.844 Y138.244 E1.33368 ; perimeter
G1 X109.683 Y138.244 E1.31165 ; perimeter
G1 X109.686 Y138.824 E0.02391 ; perimeter
M204 S1000 ; adjust acceleration
G1 X110.085 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E1.04320 ; perimeter
G1 X84.762 Y139.557 E0.01138 ; perimeter
G1 X78.862 Y139.557 E0.24305 ; perimeter
G1 X78.862 Y139.280 E0.01138 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X52.989 Y118.741 E1.31634 ; perimeter
G1 X52.696 Y118.473 E0.01636 ; perimeter
G1 X52.463 Y118.225 E0.01402 ; perimeter
G1 X52.221 Y117.922 E0.01596 ; perimeter
G1 X51.926 Y117.459 E0.02263 ; perimeter
G1 X51.698 Y116.976 E0.02201 ; perimeter
G1 X51.574 Y116.607 E0.01603 ; perimeter
G1 X51.458 Y115.995 E0.02567 ; perimeter
G1 X51.443 Y115.613 E0.01575 ; perimeter
G1 X51.506 Y115.061 E0.02286 ; perimeter
G1 X51.610 Y114.698 E0.01558 ; perimeter
G1 X51.767 Y114.351 E0.01570 ; perimeter
G1 X52.055 Y113.926 E0.02115 ; perimeter
G1 X53.209 Y112.550 E0.07396 ; perimeter
G1 X54.324 Y113.486 E0.05995 ; perimeter
G1 X53.317 Y114.685 E0.06450 ; perimeter
G1 X53.116 Y114.990 E0.01506 ; perimeter
G1 X53.009 Y115.250 E0.01156 ; perimeter
G1 X52.930 Y115.617 E0.01548 ; perimeter
G1 X52.920 Y115.774 E0.00650 ; perimeter
G1 X52.949 Y116.196 E0.01740 ; perimeter
G1 X53.080 Y116.663 E0.02001 ; perimeter
G1 X53.215 Y116.951 E0.01308 ; perimeter
G1 X53.349 Y117.173 E0.01068 ; perimeter
G1 X77.988 Y137.847 E1.32502 ; perimeter
G1 X110.078 Y137.847 E1.32195 ; perimeter
G1 X110.085 Y139.220 E0.05656 ; perimeter
M204 S1000 ; adjust acceleration
G1 X109.685 Y139.274 F10800.000 ; move inwards before travel
G1 F8640
G1 X106.794 Y139.228 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.100 F10800.000 ; lift Z
G1 X59.886 Y111.743 ; move to first perimeter point
G1 Z8.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.177 Y109.469 E0.14571 ; perimeter
G1 X54.728 Y112.388 E0.15696 ; perimeter
G1 X54.220 Y111.962 E0.02729 ; perimeter
G1 X63.217 Y101.240 E0.57663 ; perimeter
G1 X63.725 Y101.665 E0.02729 ; perimeter
G1 X61.276 Y104.584 E0.15696 ; perimeter
G1 X63.985 Y106.858 E0.14571 ; perimeter
G1 X63.641 Y107.268 E0.02205 ; perimeter
G1 X60.932 Y104.994 E0.14571 ; perimeter
G1 X57.521 Y109.059 E0.21861 ; perimeter
G1 X60.230 Y111.333 E0.14571 ; perimeter
G1 X59.925 Y111.697 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.935 Y112.301 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X57.225 Y110.028 E0.14571 ; perimeter
G1 X54.776 Y112.946 E0.15696 ; perimeter
G1 X53.662 Y112.011 E0.05995 ; perimeter
G1 X63.168 Y100.681 E0.60929 ; perimeter
G1 X64.283 Y101.617 E0.05995 ; perimeter
G1 X61.834 Y104.535 E0.15696 ; perimeter
G1 X64.544 Y106.809 E0.14571 ; perimeter
G1 X63.690 Y107.826 E0.05471 ; perimeter
G1 X60.981 Y105.553 E0.14571 ; perimeter
G1 X58.079 Y109.010 E0.18596 ; perimeter
G1 X60.789 Y111.284 E0.14571 ; perimeter
G1 X59.974 Y112.255 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.661 Y112.010 F10800.000 ; move inwards before travel
G1 F8640
G1 X57.417 Y110.183 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.100 F10800.000 ; lift Z
G1 X103.027 Y119.289 ; move to first perimeter point
G1 Z8.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.289 E0.22512 ; perimeter
G1 X97.562 Y119.165 E0.00510 ; perimeter
G1 X103.027 Y119.165 E0.22512 ; perimeter
G1 X103.027 Y119.229 E0.00263 ; perimeter
M204 S1000 ; adjust acceleration
G1 X103.423 Y119.685 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.268 Y119.685 E0.33596 ; perimeter
G1 X86.553 Y112.372 E0.46869 ; perimeter
G1 X81.416 Y112.372 E0.21162 ; perimeter
G1 X67.249 Y100.485 E0.76183 ; perimeter
G1 X66.709 Y100.301 E0.02350 ; perimeter
G1 X66.320 Y100.232 E0.01629 ; perimeter
G1 X66.012 Y100.218 E0.01270 ; perimeter
G1 X65.650 Y100.249 E0.01495 ; perimeter
G1 X65.337 Y100.315 E0.01320 ; perimeter
G1 X64.919 Y100.484 E0.01856 ; perimeter
G1 X64.763 Y100.583 E0.00761 ; perimeter
G1 X64.211 Y100.120 E0.02971 ; perimeter
G1 X64.515 Y99.900 E0.01545 ; perimeter
G1 X64.799 Y99.762 E0.01303 ; perimeter
G1 X65.271 Y99.621 E0.02027 ; perimeter
G1 X65.599 Y99.576 E0.01364 ; perimeter
G1 X66.142 Y99.583 E0.02238 ; perimeter
G1 X66.492 Y99.636 E0.01456 ; perimeter
G1 X66.965 Y99.765 E0.02023 ; perimeter
G1 X67.546 Y100.019 E0.02611 ; perimeter
G1 X68.020 Y100.314 E0.02300 ; perimeter
G1 X68.288 Y100.521 E0.01393 ; perimeter
G1 X81.649 Y111.732 E0.71851 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y118.769 E0.01138 ; perimeter
G1 X103.423 Y118.769 E0.25777 ; perimeter
G1 X103.423 Y119.625 E0.03529 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X100.132 Y119.649 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.100 F10800.000 ; lift Z
G1 X95.645 Y118.648 ; move to first perimeter point
G1 Z8.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y118.372 E0.01138 ; perimeter
G1 X103.819 Y118.372 E0.29043 ; perimeter
G1 X103.819 Y120.081 E0.07041 ; perimeter
G1 X95.124 Y120.081 E0.35823 ; perimeter
G1 X86.408 Y112.768 E0.46869 ; perimeter
G1 X81.271 Y112.768 E0.21162 ; perimeter
G1 X67.051 Y100.836 E0.76472 ; perimeter
G1 X66.610 Y100.686 E0.01919 ; perimeter
G1 X66.276 Y100.627 E0.01397 ; perimeter
G1 X66.019 Y100.616 E0.01059 ; perimeter
G1 X65.708 Y100.642 E0.01288 ; perimeter
G1 X65.453 Y100.695 E0.01072 ; perimeter
G1 X65.102 Y100.838 E0.01563 ; perimeter
G1 X64.865 Y100.988 E0.01156 ; perimeter
G1 X64.754 Y101.093 E0.00626 ; perimeter
G1 X63.621 Y100.142 E0.06095 ; perimeter
G1 X64.001 Y99.771 E0.02186 ; perimeter
G1 X64.315 Y99.556 E0.01570 ; perimeter
G1 X64.655 Y99.391 E0.01558 ; perimeter
G1 X65.187 Y99.232 E0.02286 ; perimeter
G1 X65.569 Y99.181 E0.01588 ; perimeter
G1 X66.184 Y99.188 E0.02533 ; perimeter
G1 X66.574 Y99.247 E0.01625 ; perimeter
G1 X67.091 Y99.388 E0.02208 ; perimeter
G1 X67.451 Y99.531 E0.01594 ; perimeter
G1 X67.739 Y99.672 E0.01320 ; perimeter
G1 X68.247 Y99.988 E0.02466 ; perimeter
G1 X68.536 Y100.212 E0.01508 ; perimeter
G1 X81.793 Y111.335 E0.71289 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.599 Y118.610 E0.46622 ; perimeter
M204 S1000 ; adjust acceleration
G1 X95.787 Y119.023 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.769 Y118.648 E-0.27035 ; wipe and retract
G1 X96.769 Y118.372 E-0.06378 ; wipe and retract
G1 X98.614 Y118.372 E-0.42587 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.100 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z8.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.100 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z8.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.100 F10800.000 ; lift Z
G1 X146.403 Y119.289 ; move to first perimeter point
G1 Z8.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X146.403 Y119.165 E0.00510 ; perimeter
G1 X151.868 Y119.165 E0.22512 ; perimeter
G1 X151.868 Y119.289 E0.00510 ; perimeter
G1 X146.463 Y119.289 E0.22265 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.007 Y119.685 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X146.007 Y118.769 E0.03776 ; perimeter
G1 X152.264 Y118.769 E0.25777 ; perimeter
G1 X152.264 Y119.045 E0.01138 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X181.141 Y100.521 E0.71848 ; perimeter
G1 X181.437 Y100.294 E0.01537 ; perimeter
G1 X181.696 Y100.125 E0.01275 ; perimeter
G1 X182.009 Y99.954 E0.01468 ; perimeter
G1 X182.341 Y99.810 E0.01490 ; perimeter
G1 X182.933 Y99.636 E0.02543 ; perimeter
G1 X183.273 Y99.585 E0.01415 ; perimeter
G1 X183.839 Y99.578 E0.02334 ; perimeter
G1 X184.166 Y99.622 E0.01358 ; perimeter
G1 X184.487 Y99.709 E0.01369 ; perimeter
G1 X184.916 Y99.902 E0.01940 ; perimeter
G1 X185.219 Y100.119 E0.01534 ; perimeter
G1 X184.666 Y100.583 E0.02973 ; perimeter
G1 X184.510 Y100.484 E0.00761 ; perimeter
G1 X184.093 Y100.315 E0.01856 ; perimeter
G1 X183.779 Y100.249 E0.01320 ; perimeter
G1 X183.418 Y100.218 E0.01494 ; perimeter
G1 X183.110 Y100.232 E0.01270 ; perimeter
G1 X182.720 Y100.301 E0.01629 ; perimeter
G1 X182.180 Y100.485 E0.02350 ; perimeter
G1 X168.014 Y112.372 E0.76183 ; perimeter
G1 X162.877 Y112.372 E0.21162 ; perimeter
G1 X154.162 Y119.685 E0.46869 ; perimeter
G1 X146.067 Y119.685 E0.33349 ; perimeter
M204 S1000 ; adjust acceleration
G1 X145.610 Y120.081 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X145.610 Y118.372 E0.07041 ; perimeter
G1 X152.660 Y118.372 E0.29043 ; perimeter
G1 X152.660 Y118.648 E0.01138 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X180.893 Y100.212 E0.71288 ; perimeter
G1 X181.208 Y99.970 E0.01636 ; perimeter
G1 X181.493 Y99.784 E0.01402 ; perimeter
G1 X181.835 Y99.598 E0.01604 ; perimeter
G1 X182.198 Y99.440 E0.01630 ; perimeter
G1 X182.478 Y99.344 E0.01221 ; perimeter
G1 X182.854 Y99.248 E0.01600 ; perimeter
G1 X183.240 Y99.189 E0.01610 ; perimeter
G1 X183.864 Y99.181 E0.02568 ; perimeter
G1 X184.245 Y99.233 E0.01586 ; perimeter
G1 X184.621 Y99.335 E0.01604 ; perimeter
G1 X185.115 Y99.557 E0.02232 ; perimeter
G1 X185.522 Y99.849 E0.02062 ; perimeter
G1 X185.800 Y100.149 E0.01688 ; perimeter
G1 X184.675 Y101.093 E0.06048 ; perimeter
G1 X184.565 Y100.988 E0.00626 ; perimeter
G1 X184.328 Y100.838 E0.01156 ; perimeter
G1 X183.976 Y100.695 E0.01563 ; perimeter
G1 X183.722 Y100.642 E0.01072 ; perimeter
G1 X183.410 Y100.616 E0.01288 ; perimeter
G1 X183.153 Y100.627 E0.01059 ; perimeter
G1 X182.819 Y100.686 E0.01397 ; perimeter
G1 X182.378 Y100.836 E0.01919 ; perimeter
G1 X168.158 Y112.768 E0.76472 ; perimeter
G1 X163.021 Y112.768 E0.21162 ; perimeter
G1 X154.306 Y120.081 E0.46869 ; perimeter
G1 X145.670 Y120.081 E0.35576 ; perimeter
M204 S1000 ; adjust acceleration
G1 X145.763 Y119.712 F10800.000 ; move inwards before travel
G1 F8640
G1 X145.610 Y118.372 E-0.39492 ; wipe and retract
G1 X147.191 Y118.372 E-0.36508 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.100 F10800.000 ; lift Z
G1 X189.544 Y111.743 ; move to first perimeter point
G1 Z8.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X189.199 Y111.333 E0.02205 ; perimeter
G1 X191.909 Y109.059 E0.14571 ; perimeter
G1 X188.498 Y104.994 E0.21861 ; perimeter
G1 X185.788 Y107.268 E0.14571 ; perimeter
G1 X185.444 Y106.858 E0.02205 ; perimeter
G1 X188.154 Y104.584 E0.14571 ; perimeter
G1 X185.705 Y101.665 E0.15696 ; perimeter
G1 X186.212 Y101.240 E0.02729 ; perimeter
G1 X195.210 Y111.962 E0.57663 ; perimeter
G1 X194.702 Y112.388 E0.02729 ; perimeter
G1 X192.253 Y109.469 E0.15696 ; perimeter
G1 X189.589 Y111.704 E0.14324 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.495 Y112.301 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X188.641 Y111.284 E0.05471 ; perimeter
G1 X191.351 Y109.010 E0.14571 ; perimeter
M73 P42 R78
G1 X188.449 Y105.553 E0.18596 ; perimeter
G1 X185.739 Y107.826 E0.14571 ; perimeter
G1 X184.886 Y106.809 E0.05471 ; perimeter
G1 X187.595 Y104.535 E0.14571 ; perimeter
G1 X185.146 Y101.617 E0.15696 ; perimeter
G1 X186.261 Y100.681 E0.05995 ; perimeter
G1 X195.768 Y112.011 E0.60929 ; perimeter
G1 X194.653 Y112.946 E0.05995 ; perimeter
G1 X192.204 Y110.028 E0.15696 ; perimeter
G1 X189.541 Y112.263 E0.14324 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.534 Y111.903 F10800.000 ; move inwards before travel
G1 F8640
G1 X188.641 Y111.284 E-0.30695 ; wipe and retract
G1 X190.144 Y110.023 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.100 F10800.000 ; lift Z
G1 X165.460 Y138.764 ; move to first perimeter point
G1 Z8.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y138.640 E0.00510 ; perimeter
G1 X169.775 Y138.640 E0.17774 ; perimeter
G1 X169.775 Y138.764 E0.00510 ; perimeter
G1 X165.520 Y138.764 E0.17527 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y138.640 E-0.03178 ; wipe and retract
G1 X168.614 Y138.640 E-0.72822 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.100 F10800.000 ; lift Z
G1 X139.743 Y138.884 ; move to first perimeter point
G1 Z8.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X139.746 Y138.244 E0.02638 ; perimeter
G1 X171.586 Y138.244 E1.31165 ; perimeter
G1 X196.386 Y117.434 E1.33368 ; perimeter
G1 X196.564 Y117.138 E0.01424 ; perimeter
G1 X196.722 Y116.802 E0.01529 ; perimeter
G1 X196.873 Y116.264 E0.02303 ; perimeter
G1 X196.907 Y115.775 E0.02018 ; perimeter
G1 X196.893 Y115.562 E0.00880 ; perimeter
G1 X196.801 Y115.132 E0.01814 ; perimeter
G1 X196.666 Y114.804 E0.01461 ; perimeter
G1 X196.430 Y114.448 E0.01758 ; perimeter
G1 X195.664 Y113.535 E0.04911 ; perimeter
G1 X196.172 Y113.109 E0.02729 ; perimeter
G1 X197.063 Y114.170 E0.05710 ; perimeter
G1 X197.258 Y114.445 E0.01390 ; perimeter
G1 X197.449 Y114.841 E0.01810 ; perimeter
G1 X197.535 Y115.145 E0.01303 ; perimeter
G1 X197.582 Y115.485 E0.01411 ; perimeter
G1 X197.577 Y115.965 E0.01978 ; perimeter
G1 X197.474 Y116.499 E0.02238 ; perimeter
G1 X197.362 Y116.832 E0.01449 ; perimeter
G1 X197.219 Y117.147 E0.01426 ; perimeter
G1 X197.007 Y117.512 E0.01737 ; perimeter
G1 X196.797 Y117.807 E0.01495 ; perimeter
G1 X196.567 Y118.075 E0.01452 ; perimeter
G1 X196.175 Y118.446 E0.02225 ; perimeter
G1 X171.819 Y138.884 E1.30983 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y139.160 E0.01138 ; perimeter
G1 X165.064 Y139.160 E0.21040 ; perimeter
G1 X165.064 Y138.884 E0.01138 ; perimeter
G1 X139.803 Y138.884 E1.04064 ; perimeter
M204 S1000 ; adjust acceleration
G1 X139.344 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X139.352 Y137.847 E0.05904 ; perimeter
G1 X171.441 Y137.847 E1.32195 ; perimeter
G1 X196.080 Y117.173 E1.32502 ; perimeter
G1 X196.214 Y116.951 E0.01068 ; perimeter
G1 X196.349 Y116.663 E0.01308 ; perimeter
G1 X196.481 Y116.196 E0.02001 ; perimeter
G1 X196.510 Y115.774 E0.01740 ; perimeter
G1 X196.500 Y115.617 E0.00650 ; perimeter
G1 X196.421 Y115.250 E0.01548 ; perimeter
G1 X196.314 Y114.990 E0.01156 ; perimeter
G1 X196.112 Y114.685 E0.01506 ; perimeter
G1 X195.106 Y113.486 E0.06451 ; perimeter
G1 X196.221 Y112.550 E0.05995 ; perimeter
G1 X197.376 Y113.928 E0.07407 ; perimeter
G1 X197.601 Y114.243 E0.01594 ; perimeter
G1 X197.821 Y114.700 E0.02090 ; perimeter
G1 X197.924 Y115.064 E0.01558 ; perimeter
G1 X197.987 Y115.607 E0.02253 ; perimeter
G1 X197.972 Y116.000 E0.01621 ; perimeter
G1 X197.857 Y116.604 E0.02533 ; perimeter
G1 X197.731 Y116.977 E0.01622 ; perimeter
G1 X197.572 Y117.329 E0.01590 ; perimeter
G1 X197.341 Y117.727 E0.01895 ; perimeter
G1 X197.109 Y118.052 E0.01645 ; perimeter
G1 X196.855 Y118.349 E0.01610 ; perimeter
G1 X196.439 Y118.742 E0.02358 ; perimeter
G1 X171.963 Y139.280 E1.31626 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y139.557 E0.01138 ; perimeter
G1 X164.667 Y139.557 E0.24306 ; perimeter
G1 X164.667 Y139.280 E0.01138 ; perimeter
G1 X139.404 Y139.280 E1.04073 ; perimeter
M204 S1000 ; adjust acceleration
G1 X139.547 Y138.935 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;8.75


G1 F8640
G1 X139.352 Y137.847 E-0.33111 ; wipe and retract
G1 X141.209 Y137.847 E-0.42889 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;8.75
G1 X84.255 Y100.793 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.940 Y100.793 E0.17774 ; perimeter
G1 X79.940 Y100.599 E0.00799 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y100.733 E0.00552 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.964 Y100.779 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
G1 X109.357 Y100.738 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E1.01777 ; perimeter
G1 X84.651 Y101.189 E0.01859 ; perimeter
G1 X79.544 Y101.189 E0.21040 ; perimeter
G1 X79.544 Y100.738 E0.01859 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X53.401 Y80.185 E1.31725 ; perimeter
G1 X53.120 Y79.926 E0.01575 ; perimeter
G1 X52.696 Y79.433 E0.02678 ; perimeter
G1 X52.426 Y79.010 E0.02068 ; perimeter
G1 X52.219 Y78.572 E0.01998 ; perimeter
G1 X52.108 Y78.243 E0.01430 ; perimeter
G1 X52.004 Y77.695 E0.02296 ; perimeter
G1 X51.991 Y77.366 E0.01358 ; perimeter
G1 X52.045 Y76.894 E0.01959 ; perimeter
G1 X52.178 Y76.471 E0.01823 ; perimeter
G1 X52.270 Y76.276 E0.00889 ; perimeter
G1 X52.397 Y76.076 E0.00978 ; perimeter
G1 X53.412 Y74.852 E0.06548 ; perimeter
G1 X53.917 Y75.276 E0.02714 ; perimeter
G1 X53.150 Y76.189 E0.04910 ; perimeter
G1 X52.911 Y76.550 E0.01786 ; perimeter
G1 X52.746 Y76.986 E0.01919 ; perimeter
G1 X52.684 Y77.330 E0.01440 ; perimeter
G1 X52.676 Y77.652 E0.01325 ; perimeter
G1 X52.706 Y77.979 E0.01354 ; perimeter
G1 X52.774 Y78.293 E0.01323 ; perimeter
G1 X52.910 Y78.665 E0.01633 ; perimeter
G1 X53.094 Y79.014 E0.01625 ; perimeter
G1 X53.318 Y79.334 E0.01609 ; perimeter
G1 X53.574 Y79.618 E0.01576 ; perimeter
G1 X78.091 Y100.203 E1.31878 ; perimeter
G1 X109.357 Y100.203 E1.28805 ; perimeter
G1 X109.357 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X109.753 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E1.01776 ; perimeter
G1 X85.047 Y101.586 E0.01859 ; perimeter
G1 X79.147 Y101.586 E0.24305 ; perimeter
G1 X79.147 Y101.134 E0.01859 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X53.140 Y80.483 E1.32355 ; perimeter
G1 X52.841 Y80.208 E0.01673 ; perimeter
G1 X52.621 Y79.974 E0.01322 ; perimeter
G1 X52.374 Y79.664 E0.01633 ; perimeter
G1 X52.078 Y79.202 E0.02259 ; perimeter
G1 X51.850 Y78.720 E0.02197 ; perimeter
G1 X51.724 Y78.344 E0.01637 ; perimeter
G1 X51.609 Y77.740 E0.02529 ; perimeter
G1 X51.594 Y77.351 E0.01605 ; perimeter
G1 X51.656 Y76.811 E0.02241 ; perimeter
G1 X51.808 Y76.327 E0.02088 ; perimeter
G1 X51.922 Y76.085 E0.01103 ; perimeter
G1 X52.076 Y75.842 E0.01185 ; perimeter
G1 X53.361 Y74.292 E0.08293 ; perimeter
G1 X54.475 Y75.227 E0.05990 ; perimeter
G1 X53.469 Y76.426 E0.06450 ; perimeter
G1 X53.266 Y76.732 E0.01510 ; perimeter
G1 X53.130 Y77.092 E0.01586 ; perimeter
G1 X53.080 Y77.371 E0.01166 ; perimeter
G1 X53.072 Y77.639 E0.01104 ; perimeter
G1 X53.098 Y77.918 E0.01157 ; perimeter
G1 X53.155 Y78.182 E0.01112 ; perimeter
G1 X53.273 Y78.504 E0.01412 ; perimeter
G1 X53.432 Y78.807 E0.01410 ; perimeter
G1 X53.629 Y79.086 E0.01407 ; perimeter
G1 X53.850 Y79.333 E0.01364 ; perimeter
G1 X78.235 Y99.806 E1.31168 ; perimeter
G1 X109.754 Y99.806 E1.29844 ; perimeter
G1 X109.753 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X109.353 Y101.129 F10800.000 ; move inwards before travel
G1 F8640
G1 X106.461 Y101.082 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
G1 X60.032 Y73.480 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.328 Y71.211 E0.14544 ; perimeter
G1 X54.879 Y74.129 E0.15696 ; perimeter
G1 X54.371 Y73.703 E0.02729 ; perimeter
G1 X63.368 Y62.981 E0.57663 ; perimeter
G1 X63.876 Y63.407 E0.02729 ; perimeter
G1 X61.427 Y66.325 E0.15696 ; perimeter
G1 X64.131 Y68.595 E0.14544 ; perimeter
G1 X63.787 Y69.005 E0.02205 ; perimeter
G1 X61.083 Y66.736 E0.14544 ; perimeter
G1 X57.672 Y70.801 E0.21861 ; perimeter
G1 X60.376 Y73.070 E0.14544 ; perimeter
G1 X60.071 Y73.434 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X60.081 Y74.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X57.376 Y71.769 E0.14544 ; perimeter
G1 X54.927 Y74.688 E0.15696 ; perimeter
G1 X53.813 Y73.752 E0.05995 ; perimeter
G1 X63.319 Y62.423 E0.60929 ; perimeter
G1 X64.434 Y63.358 E0.05995 ; perimeter
G1 X61.985 Y66.277 E0.15696 ; perimeter
G1 X64.690 Y68.546 E0.14544 ; perimeter
G1 X63.836 Y69.563 E0.05471 ; perimeter
G1 X61.132 Y67.294 E0.14544 ; perimeter
G1 X58.230 Y70.752 E0.18596 ; perimeter
G1 X60.935 Y73.021 E0.14544 ; perimeter
G1 X60.120 Y73.993 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.808 Y73.747 F10800.000 ; move inwards before travel
G1 F8640
G1 X57.563 Y71.920 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
G1 X103.062 Y81.038 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.21482 ; perimeter
G1 X97.847 Y80.844 E0.00799 ; perimeter
G1 X103.062 Y80.844 E0.21482 ; perimeter
G1 X103.062 Y80.978 E0.00552 ; perimeter
M204 S1000 ; adjust acceleration
G1 X103.458 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.32409 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21163 ; perimeter
G1 X67.906 Y62.526 E0.74356 ; perimeter
M73 Q42 S80
G1 X67.452 Y62.257 E0.02175 ; perimeter
G1 X66.965 Y62.070 E0.02149 ; perimeter
G1 X66.465 Y61.972 E0.02097 ; perimeter
G1 X65.972 Y61.966 E0.02032 ; perimeter
G1 X65.510 Y62.050 E0.01933 ; perimeter
G1 X65.176 Y62.173 E0.01468 ; perimeter
G1 X64.917 Y62.327 E0.01240 ; perimeter
G1 X64.362 Y61.861 E0.02987 ; perimeter
G1 X64.665 Y61.641 E0.01542 ; perimeter
G1 X64.955 Y61.501 E0.01326 ; perimeter
G1 X65.419 Y61.363 E0.01996 ; perimeter
G1 X65.754 Y61.318 E0.01391 ; perimeter
G1 X66.288 Y61.324 E0.02203 ; perimeter
G1 X66.646 Y61.378 E0.01490 ; perimeter
G1 X67.118 Y61.507 E0.02017 ; perimeter
G1 X67.690 Y61.756 E0.02568 ; perimeter
G1 X68.178 Y62.060 E0.02368 ; perimeter
G1 X68.439 Y62.262 E0.01360 ; perimeter
G1 X81.934 Y73.586 E0.72572 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y80.447 E0.01859 ; perimeter
G1 X103.458 Y80.447 E0.24748 ; perimeter
G1 X103.458 Y81.374 E0.03817 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X100.167 Y81.399 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
G1 X95.930 Y80.502 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y80.051 E0.01859 ; perimeter
G1 X103.855 Y80.051 E0.28013 ; perimeter
G1 X103.855 Y81.830 E0.07330 ; perimeter
G1 X95.447 Y81.830 E0.34636 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21163 ; perimeter
G1 X67.676 Y62.851 E0.74816 ; perimeter
G1 X67.278 Y62.615 E0.01905 ; perimeter
G1 X66.854 Y62.452 E0.01872 ; perimeter
G1 X66.424 Y62.368 E0.01807 ; perimeter
G1 X66.005 Y62.362 E0.01726 ; perimeter
G1 X65.615 Y62.433 E0.01633 ; perimeter
G1 X65.347 Y62.532 E0.01176 ; perimeter
G1 X65.016 Y62.729 E0.01586 ; perimeter
G1 X64.905 Y62.834 E0.00630 ; perimeter
G1 X63.772 Y61.883 E0.06094 ; perimeter
G1 X64.147 Y61.516 E0.02161 ; perimeter
G1 X64.465 Y61.298 E0.01590 ; perimeter
G1 X64.811 Y61.130 E0.01582 ; perimeter
G1 X65.335 Y60.974 E0.02255 ; perimeter
G1 X65.724 Y60.922 E0.01617 ; perimeter
G1 X66.330 Y60.929 E0.02495 ; perimeter
G1 X66.728 Y60.989 E0.01659 ; perimeter
G1 X67.244 Y61.131 E0.02204 ; perimeter
G1 X67.612 Y61.277 E0.01631 ; perimeter
G1 X67.882 Y61.409 E0.01238 ; perimeter
G1 X68.404 Y61.734 E0.02533 ; perimeter
G1 X68.688 Y61.953 E0.01475 ; perimeter
G1 X82.078 Y73.189 E0.72010 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.884 Y80.464 E0.46622 ; perimeter
M204 S1000 ; adjust acceleration
G1 X96.072 Y80.876 F10800.000 ; move inwards before travel
G1 F8640
G1 X97.055 Y80.502 E-0.27035 ; wipe and retract
G1 X97.055 Y80.051 E-0.10420 ; wipe and retract
G1 X98.724 Y80.051 E-0.38545 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
G1 X146.938 Y81.038 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X146.938 Y80.844 E0.00799 ; perimeter
G1 X152.153 Y80.844 E0.21482 ; perimeter
G1 X152.153 Y81.038 E0.00799 ; perimeter
G1 X146.998 Y81.038 E0.21235 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.542 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X146.542 Y80.447 E0.04064 ; perimeter
G1 X152.549 Y80.447 E0.24748 ; perimeter
G1 X152.549 Y80.899 E0.01859 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X181.560 Y62.263 E0.72567 ; perimeter
G1 X181.864 Y62.030 E0.01575 ; perimeter
G1 X182.107 Y61.871 E0.01196 ; perimeter
G1 X182.427 Y61.696 E0.01504 ; perimeter
G1 X182.767 Y61.549 E0.01526 ; perimeter
G1 X183.350 Y61.378 E0.02501 ; perimeter
G1 X183.697 Y61.326 E0.01447 ; perimeter
G1 X184.254 Y61.319 E0.02296 ; perimeter
G1 X184.588 Y61.364 E0.01386 ; perimeter
G1 X184.914 Y61.453 E0.01393 ; perimeter
G1 X185.337 Y61.644 E0.01910 ; perimeter
G1 X185.639 Y61.860 E0.01531 ; perimeter
G1 X185.083 Y62.327 E0.02989 ; perimeter
G1 X184.814 Y62.167 E0.01286 ; perimeter
G1 X184.350 Y62.014 E0.02016 ; perimeter
G1 X183.848 Y61.958 E0.02079 ; perimeter
G1 X183.336 Y62.002 E0.02117 ; perimeter
G1 X182.928 Y62.105 E0.01732 ; perimeter
G1 X182.543 Y62.260 E0.01710 ; perimeter
G1 X182.086 Y62.531 E0.02189 ; perimeter
G1 X168.261 Y74.121 E0.74318 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X146.602 Y81.434 E0.32161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X146.542 Y80.447 E-0.22823 ; wipe and retract
G1 X148.845 Y80.447 E-0.53177 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
G1 X154.553 Y81.830 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X146.145 Y81.830 E0.34636 ; perimeter
G1 X146.145 Y80.051 E0.07330 ; perimeter
G1 X152.945 Y80.051 E0.28013 ; perimeter
G1 X152.945 Y80.502 E0.01859 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X181.312 Y61.954 E0.72009 ; perimeter
G1 X181.634 Y61.706 E0.01673 ; perimeter
G1 X181.903 Y61.531 E0.01322 ; perimeter
G1 X182.253 Y61.340 E0.01641 ; perimeter
G1 X182.624 Y61.179 E0.01667 ; perimeter
G1 X183.270 Y60.990 E0.02775 ; perimeter
G1 X183.665 Y60.930 E0.01644 ; perimeter
G1 X184.279 Y60.922 E0.02529 ; perimeter
G1 X184.667 Y60.975 E0.01615 ; perimeter
G1 X185.048 Y61.079 E0.01629 ; perimeter
G1 X185.535 Y61.299 E0.02200 ; perimeter
G1 X185.940 Y61.589 E0.02052 ; perimeter
G1 X186.228 Y61.883 E0.01696 ; perimeter
G1 X185.095 Y62.834 E0.06094 ; perimeter
G1 X184.984 Y62.729 E0.00630 ; perimeter
G1 X184.649 Y62.530 E0.01603 ; perimeter
G1 X184.265 Y62.404 E0.01667 ; perimeter
G1 X183.843 Y62.357 E0.01749 ; perimeter
G1 X183.402 Y62.394 E0.01825 ; perimeter
G1 X183.051 Y62.482 E0.01487 ; perimeter
G1 X182.720 Y62.616 E0.01474 ; perimeter
G1 X182.316 Y62.856 E0.01933 ; perimeter
G1 X168.405 Y74.517 E0.74779 ; perimeter
G1 X163.268 Y74.517 E0.21163 ; perimeter
G1 X154.599 Y81.792 E0.46622 ; perimeter
M204 S1000 ; adjust acceleration
G1 X154.300 Y81.521 F10800.000 ; move inwards before travel
G1 F8640
G1 X151.308 Y81.807 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
G1 X189.968 Y73.480 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X189.624 Y73.070 E0.02205 ; perimeter
G1 X192.328 Y70.801 E0.14544 ; perimeter
G1 X188.917 Y66.736 E0.21861 ; perimeter
G1 X186.213 Y69.005 E0.14544 ; perimeter
G1 X185.869 Y68.595 E0.02205 ; perimeter
G1 X188.573 Y66.325 E0.14544 ; perimeter
G1 X186.124 Y63.407 E0.15696 ; perimeter
G1 X186.632 Y62.981 E0.02729 ; perimeter
G1 X195.629 Y73.703 E0.57663 ; perimeter
G1 X195.121 Y74.129 E0.02729 ; perimeter
G1 X192.672 Y71.211 E0.15696 ; perimeter
G1 X190.014 Y73.442 E0.14297 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.919 Y74.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X189.065 Y73.021 E0.05471 ; perimeter
G1 X191.770 Y70.752 E0.14544 ; perimeter
G1 X188.868 Y67.294 E0.18596 ; perimeter
G1 X186.164 Y69.563 E0.14544 ; perimeter
G1 X185.310 Y68.546 E0.05471 ; perimeter
G1 X188.015 Y66.277 E0.14544 ; perimeter
G1 X185.566 Y63.358 E0.15696 ; perimeter
G1 X186.681 Y62.423 E0.05995 ; perimeter
G1 X196.187 Y73.752 E0.60929 ; perimeter
G1 X195.073 Y74.688 E0.05995 ; perimeter
G1 X192.624 Y71.769 E0.15696 ; perimeter
G1 X189.965 Y74.000 E0.14297 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.959 Y73.640 F10800.000 ; move inwards before travel
G1 F8640
G1 X189.065 Y73.021 E-0.30695 ; wipe and retract
G1 X190.568 Y71.760 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
G1 X165.745 Y100.793 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y100.599 E0.00799 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y100.793 E0.00799 ; perimeter
G1 X165.805 Y100.793 E0.17527 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y100.599 E-0.04687 ; wipe and retract
G1 X168.834 Y100.599 E-0.71313 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
G1 X140.643 Y100.738 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X140.643 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E1.28805 ; perimeter
G1 X196.426 Y79.618 E1.31878 ; perimeter
G1 X196.682 Y79.334 E0.01576 ; perimeter
G1 X196.906 Y79.014 E0.01609 ; perimeter
G1 X197.090 Y78.665 E0.01625 ; perimeter
G1 X197.226 Y78.293 E0.01633 ; perimeter
G1 X197.294 Y77.979 E0.01323 ; perimeter
G1 X197.324 Y77.652 E0.01354 ; perimeter
G1 X197.316 Y77.330 E0.01325 ; perimeter
G1 X197.254 Y76.986 E0.01440 ; perimeter
G1 X197.093 Y76.562 E0.01866 ; perimeter
G1 X196.944 Y76.315 E0.01192 ; perimeter
G1 X196.081 Y75.278 E0.05555 ; perimeter
G1 X196.591 Y74.850 E0.02741 ; perimeter
G1 X197.482 Y75.912 E0.05709 ; perimeter
G1 X197.680 Y76.190 E0.01409 ; perimeter
G1 X197.868 Y76.581 E0.01785 ; perimeter
G1 X197.955 Y76.891 E0.01325 ; perimeter
G1 X198.002 Y77.237 E0.01440 ; perimeter
G1 X197.995 Y77.711 E0.01952 ; perimeter
G1 X197.894 Y78.236 E0.02203 ; perimeter
G1 X197.780 Y78.576 E0.01478 ; perimeter
G1 X197.633 Y78.899 E0.01462 ; perimeter
G1 X197.436 Y79.239 E0.01620 ; perimeter
G1 X197.220 Y79.543 E0.01536 ; perimeter
G1 X196.986 Y79.817 E0.01486 ; perimeter
G1 X196.595 Y80.188 E0.02219 ; perimeter
G1 X172.104 Y100.738 E1.31704 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y101.189 E0.01859 ; perimeter
G1 X165.349 Y101.189 E0.21040 ; perimeter
G1 X165.349 Y100.738 E0.01859 ; perimeter
G1 X140.703 Y100.738 E1.01530 ; perimeter
M204 S1000 ; adjust acceleration
G1 X140.247 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X140.246 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E1.29844 ; perimeter
G1 X196.150 Y79.333 E1.31168 ; perimeter
G1 X196.371 Y79.086 E0.01364 ; perimeter
G1 X196.568 Y78.807 E0.01407 ; perimeter
G1 X196.727 Y78.504 E0.01410 ; perimeter
G1 X196.845 Y78.182 E0.01412 ; perimeter
G1 X196.902 Y77.918 E0.01112 ; perimeter
G1 X196.928 Y77.639 E0.01157 ; perimeter
G1 X196.920 Y77.371 E0.01104 ; perimeter
G1 X196.870 Y77.092 E0.01166 ; perimeter
G1 X196.736 Y76.736 E0.01567 ; perimeter
G1 X196.620 Y76.545 E0.00920 ; perimeter
G1 X195.524 Y75.228 E0.07059 ; perimeter
G1 X196.640 Y74.292 E0.05999 ; perimeter
G1 X197.796 Y75.669 E0.07407 ; perimeter
G1 X198.023 Y75.988 E0.01614 ; perimeter
G1 X198.240 Y76.440 E0.02065 ; perimeter
G1 X198.344 Y76.810 E0.01582 ; perimeter
G1 X198.407 Y77.346 E0.02223 ; perimeter
G1 X198.391 Y77.746 E0.01651 ; perimeter
G1 X198.277 Y78.341 E0.02495 ; perimeter
G1 X198.149 Y78.722 E0.01655 ; perimeter
G1 X197.985 Y79.081 E0.01626 ; perimeter
G1 X197.770 Y79.453 E0.01773 ; perimeter
G1 X197.533 Y79.787 E0.01685 ; perimeter
G1 X197.273 Y80.091 E0.01647 ; perimeter
G1 X196.858 Y80.484 E0.02354 ; perimeter
G1 X172.248 Y101.134 E1.32347 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y101.586 E0.01859 ; perimeter
G1 X164.953 Y101.586 E0.24306 ; perimeter
G1 X164.953 Y101.134 E0.01859 ; perimeter
G1 X140.307 Y101.134 E1.01529 ; perimeter
M204 S1000 ; adjust acceleration
G1 X140.449 Y100.789 F10800.000 ; move inwards before travel
G1 F8640
G1 X140.246 Y99.806 E-0.30696 ; wipe and retract
G1 X142.208 Y99.806 E-0.45304 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
G1 X83.970 Y138.939 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.655 Y138.939 E0.17774 ; perimeter
G1 X79.655 Y138.745 E0.00799 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y138.879 E0.00552 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.678 Y138.925 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
G1 X109.072 Y138.884 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E1.01777 ; perimeter
G1 X84.366 Y139.335 E0.01859 ; perimeter
G1 X79.259 Y139.335 E0.21040 ; perimeter
G1 X79.259 Y138.884 E0.01859 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X53.116 Y118.331 E1.31725 ; perimeter
G1 X52.834 Y118.072 E0.01575 ; perimeter
G1 X52.411 Y117.579 E0.02678 ; perimeter
G1 X52.141 Y117.156 E0.02068 ; perimeter
G1 X51.933 Y116.718 E0.01998 ; perimeter
G1 X51.823 Y116.389 E0.01430 ; perimeter
G1 X51.719 Y115.842 E0.02296 ; perimeter
G1 X51.706 Y115.512 E0.01358 ; perimeter
G1 X51.760 Y115.040 E0.01959 ; perimeter
G1 X51.893 Y114.618 E0.01823 ; perimeter
G1 X51.985 Y114.422 E0.00889 ; perimeter
G1 X52.112 Y114.222 E0.00978 ; perimeter
G1 X53.127 Y112.999 E0.06548 ; perimeter
G1 X53.631 Y113.422 E0.02714 ; perimeter
G1 X52.865 Y114.335 E0.04910 ; perimeter
G1 X52.626 Y114.696 E0.01786 ; perimeter
G1 X52.461 Y115.132 E0.01919 ; perimeter
G1 X52.399 Y115.476 E0.01440 ; perimeter
G1 X52.390 Y115.798 E0.01325 ; perimeter
G1 X52.420 Y116.125 E0.01354 ; perimeter
G1 X52.489 Y116.439 E0.01323 ; perimeter
G1 X52.624 Y116.811 E0.01633 ; perimeter
G1 X52.808 Y117.160 E0.01625 ; perimeter
G1 X53.033 Y117.480 E0.01609 ; perimeter
G1 X53.289 Y117.764 E0.01576 ; perimeter
G1 X77.806 Y138.349 E1.31878 ; perimeter
G1 X109.072 Y138.349 E1.28805 ; perimeter
G1 X109.072 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X109.468 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E1.01776 ; perimeter
G1 X84.762 Y139.732 E0.01859 ; perimeter
G1 X78.862 Y139.732 E0.24305 ; perimeter
G1 X78.862 Y139.280 E0.01859 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X52.855 Y118.629 E1.32355 ; perimeter
G1 X52.555 Y118.354 E0.01673 ; perimeter
G1 X52.336 Y118.120 E0.01322 ; perimeter
G1 X52.088 Y117.811 E0.01633 ; perimeter
G1 X51.793 Y117.349 E0.02259 ; perimeter
G1 X51.565 Y116.866 E0.02197 ; perimeter
G1 X51.438 Y116.490 E0.01637 ; perimeter
G1 X51.324 Y115.887 E0.02529 ; perimeter
G1 X51.309 Y115.497 E0.01605 ; perimeter
G1 X51.371 Y114.957 E0.02241 ; perimeter
G1 X51.523 Y114.473 E0.02088 ; perimeter
G1 X51.637 Y114.231 E0.01103 ; perimeter
G1 X51.791 Y113.988 E0.01185 ; perimeter
G1 X53.076 Y112.439 E0.08293 ; perimeter
G1 X54.190 Y113.373 E0.05990 ; perimeter
G1 X53.183 Y114.573 E0.06450 ; perimeter
G1 X52.981 Y114.878 E0.01510 ; perimeter
G1 X52.845 Y115.238 E0.01586 ; perimeter
G1 X52.794 Y115.517 E0.01166 ; perimeter
G1 X52.787 Y115.785 E0.01104 ; perimeter
G1 X52.813 Y116.064 E0.01157 ; perimeter
G1 X52.870 Y116.328 E0.01112 ; perimeter
G1 X52.988 Y116.650 E0.01412 ; perimeter
G1 X53.147 Y116.953 E0.01410 ; perimeter
G1 X53.344 Y117.232 E0.01407 ; perimeter
G1 X53.565 Y117.479 E0.01364 ; perimeter
G1 X77.950 Y137.952 E1.31168 ; perimeter
G1 X109.469 Y137.952 E1.29844 ; perimeter
G1 X109.468 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X109.068 Y139.275 F10800.000 ; move inwards before travel
G1 F8640
G1 X106.176 Y139.228 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
G1 X59.747 Y111.626 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.042 Y109.357 E0.14544 ; perimeter
G1 X54.593 Y112.276 E0.15696 ; perimeter
G1 X54.086 Y111.850 E0.02729 ; perimeter
G1 X63.083 Y101.127 E0.57663 ; perimeter
G1 X63.591 Y101.553 E0.02729 ; perimeter
G1 X61.142 Y104.472 E0.15696 ; perimeter
G1 X63.846 Y106.741 E0.14544 ; perimeter
G1 X63.502 Y107.151 E0.02205 ; perimeter
G1 X60.798 Y104.882 E0.14544 ; perimeter
G1 X57.387 Y108.947 E0.21861 ; perimeter
G1 X60.091 Y111.216 E0.14544 ; perimeter
G1 X59.786 Y111.580 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.796 Y112.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X57.091 Y109.915 E0.14544 ; perimeter
G1 X54.642 Y112.834 E0.15696 ; perimeter
G1 X53.527 Y111.898 E0.05995 ; perimeter
G1 X63.034 Y100.569 E0.60929 ; perimeter
G1 X64.149 Y101.504 E0.05995 ; perimeter
G1 X61.700 Y104.423 E0.15696 ; perimeter
G1 X64.405 Y106.692 E0.14544 ; perimeter
G1 X63.551 Y107.709 E0.05471 ; perimeter
G1 X60.846 Y105.440 E0.14544 ; perimeter
G1 X57.945 Y108.898 E0.18596 ; perimeter
G1 X60.649 Y111.167 E0.14544 ; perimeter
G1 X59.834 Y112.139 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.522 Y111.893 F10800.000 ; move inwards before travel
G1 F8640
G1 X57.277 Y110.066 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
G1 X102.777 Y119.184 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.21482 ; perimeter
G1 X97.562 Y118.990 E0.00799 ; perimeter
G1 X102.777 Y118.990 E0.21482 ; perimeter
G1 X102.777 Y119.124 E0.00552 ; perimeter
M204 S1000 ; adjust acceleration
G1 X103.173 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.32409 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21163 ; perimeter
G1 X67.621 Y100.672 E0.74356 ; perimeter
M73 P42 R77
G1 X67.166 Y100.404 E0.02175 ; perimeter
G1 X66.679 Y100.216 E0.02149 ; perimeter
G1 X66.180 Y100.118 E0.02097 ; perimeter
G1 X65.687 Y100.112 E0.02032 ; perimeter
G1 X65.225 Y100.196 E0.01933 ; perimeter
G1 X64.891 Y100.319 E0.01468 ; perimeter
G1 X64.632 Y100.473 E0.01240 ; perimeter
G1 X64.076 Y100.007 E0.02987 ; perimeter
G1 X64.380 Y99.788 E0.01542 ; perimeter
G1 X64.669 Y99.647 E0.01326 ; perimeter
G1 X65.134 Y99.509 E0.01996 ; perimeter
G1 X65.469 Y99.464 E0.01391 ; perimeter
G1 X66.003 Y99.470 E0.02203 ; perimeter
G1 X66.361 Y99.524 E0.01490 ; perimeter
G1 X66.833 Y99.653 E0.02017 ; perimeter
G1 X67.405 Y99.902 E0.02568 ; perimeter
G1 X67.892 Y100.206 E0.02368 ; perimeter
G1 X68.154 Y100.408 E0.01360 ; perimeter
G1 X81.649 Y111.732 E0.72572 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y118.593 E0.01859 ; perimeter
G1 X103.173 Y118.593 E0.24748 ; perimeter
G1 X103.173 Y119.520 E0.03817 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X99.882 Y119.545 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
G1 X95.645 Y118.648 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y118.197 E0.01859 ; perimeter
G1 X103.569 Y118.197 E0.28013 ; perimeter
G1 X103.569 Y119.976 E0.07330 ; perimeter
G1 X95.162 Y119.976 E0.34636 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21163 ; perimeter
G1 X67.391 Y100.997 E0.74816 ; perimeter
G1 X66.993 Y100.762 E0.01905 ; perimeter
G1 X66.569 Y100.598 E0.01872 ; perimeter
G1 X66.139 Y100.514 E0.01807 ; perimeter
G1 X65.720 Y100.509 E0.01726 ; perimeter
G1 X65.330 Y100.580 E0.01633 ; perimeter
G1 X65.062 Y100.678 E0.01176 ; perimeter
G1 X64.731 Y100.875 E0.01586 ; perimeter
G1 X64.620 Y100.980 E0.00630 ; perimeter
G1 X63.487 Y100.029 E0.06094 ; perimeter
G1 X63.862 Y99.663 E0.02161 ; perimeter
G1 X64.180 Y99.444 E0.01590 ; perimeter
G1 X64.526 Y99.277 E0.01582 ; perimeter
G1 X65.050 Y99.121 E0.02255 ; perimeter
G1 X65.439 Y99.068 E0.01617 ; perimeter
G1 X66.045 Y99.075 E0.02495 ; perimeter
G1 X66.443 Y99.135 E0.01659 ; perimeter
G1 X66.959 Y99.277 E0.02204 ; perimeter
G1 X67.327 Y99.423 E0.01631 ; perimeter
G1 X67.597 Y99.555 E0.01238 ; perimeter
G1 X68.119 Y99.880 E0.02533 ; perimeter
G1 X68.402 Y100.099 E0.01475 ; perimeter
G1 X81.793 Y111.335 E0.72010 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.599 Y118.610 E0.46622 ; perimeter
M204 S1000 ; adjust acceleration
G1 X95.787 Y119.023 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.769 Y118.648 E-0.27035 ; wipe and retract
G1 X96.769 Y118.197 E-0.10420 ; wipe and retract
G1 X98.439 Y118.197 E-0.38545 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
G1 X146.653 Y119.184 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X146.653 Y118.990 E0.00799 ; perimeter
G1 X151.868 Y118.990 E0.21482 ; perimeter
G1 X151.868 Y119.184 E0.00799 ; perimeter
G1 X146.713 Y119.184 E0.21235 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.257 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X146.257 Y118.593 E0.04064 ; perimeter
G1 X152.264 Y118.593 E0.24748 ; perimeter
G1 X152.264 Y119.045 E0.01859 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X181.275 Y100.409 E0.72567 ; perimeter
G1 X181.578 Y100.176 E0.01575 ; perimeter
G1 X181.822 Y100.018 E0.01196 ; perimeter
G1 X182.142 Y99.842 E0.01504 ; perimeter
G1 X182.482 Y99.695 E0.01526 ; perimeter
G1 X183.065 Y99.525 E0.02501 ; perimeter
G1 X183.412 Y99.472 E0.01447 ; perimeter
G1 X183.969 Y99.465 E0.02296 ; perimeter
G1 X184.302 Y99.510 E0.01386 ; perimeter
G1 X184.629 Y99.599 E0.01393 ; perimeter
G1 X185.051 Y99.790 E0.01910 ; perimeter
G1 X185.353 Y100.006 E0.01531 ; perimeter
G1 X184.798 Y100.473 E0.02989 ; perimeter
G1 X184.529 Y100.313 E0.01286 ; perimeter
G1 X184.064 Y100.160 E0.02016 ; perimeter
G1 X183.563 Y100.105 E0.02079 ; perimeter
G1 X183.051 Y100.148 E0.02117 ; perimeter
G1 X182.643 Y100.251 E0.01732 ; perimeter
G1 X182.258 Y100.406 E0.01710 ; perimeter
G1 X181.801 Y100.677 E0.02189 ; perimeter
G1 X167.976 Y112.267 E0.74318 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X146.317 Y119.580 E0.32161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X146.257 Y118.593 E-0.22823 ; wipe and retract
G1 X148.560 Y118.593 E-0.53177 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
G1 X154.268 Y119.976 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X145.860 Y119.976 E0.34636 ; perimeter
G1 X145.860 Y118.197 E0.07330 ; perimeter
G1 X152.660 Y118.197 E0.28013 ; perimeter
G1 X152.660 Y118.648 E0.01859 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X181.027 Y100.100 E0.72009 ; perimeter
G1 X181.349 Y99.852 E0.01673 ; perimeter
G1 X181.618 Y99.677 E0.01322 ; perimeter
G1 X181.967 Y99.486 E0.01641 ; perimeter
G1 X182.339 Y99.325 E0.01667 ; perimeter
G1 X182.985 Y99.136 E0.02775 ; perimeter
G1 X183.380 Y99.076 E0.01644 ; perimeter
G1 X183.993 Y99.068 E0.02529 ; perimeter
G1 X184.382 Y99.121 E0.01615 ; perimeter
G1 X184.763 Y99.225 E0.01629 ; perimeter
G1 X185.250 Y99.445 E0.02200 ; perimeter
G1 X185.655 Y99.735 E0.02052 ; perimeter
G1 X185.943 Y100.029 E0.01696 ; perimeter
G1 X184.810 Y100.980 E0.06094 ; perimeter
G1 X184.699 Y100.875 E0.00630 ; perimeter
G1 X184.364 Y100.676 E0.01603 ; perimeter
G1 X183.980 Y100.550 E0.01667 ; perimeter
G1 X183.558 Y100.503 E0.01749 ; perimeter
G1 X183.116 Y100.540 E0.01825 ; perimeter
G1 X182.766 Y100.628 E0.01487 ; perimeter
G1 X182.435 Y100.763 E0.01474 ; perimeter
G1 X182.031 Y101.002 E0.01933 ; perimeter
G1 X168.120 Y112.663 E0.74779 ; perimeter
G1 X162.983 Y112.663 E0.21163 ; perimeter
G1 X154.314 Y119.938 E0.46622 ; perimeter
M204 S1000 ; adjust acceleration
G1 X154.015 Y119.667 F10800.000 ; move inwards before travel
G1 F8640
G1 X151.022 Y119.953 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
G1 X189.683 Y111.626 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X189.339 Y111.216 E0.02205 ; perimeter
G1 X192.043 Y108.947 E0.14544 ; perimeter
G1 X188.632 Y104.882 E0.21861 ; perimeter
G1 X185.927 Y107.151 E0.14544 ; perimeter
G1 X185.583 Y106.741 E0.02205 ; perimeter
G1 X188.288 Y104.472 E0.14544 ; perimeter
G1 X185.839 Y101.553 E0.15696 ; perimeter
G1 X186.346 Y101.127 E0.02729 ; perimeter
G1 X195.344 Y111.850 E0.57663 ; perimeter
G1 X194.836 Y112.276 E0.02729 ; perimeter
G1 X192.387 Y109.357 E0.15696 ; perimeter
G1 X189.729 Y111.588 E0.14297 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.634 Y112.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X188.780 Y111.167 E0.05471 ; perimeter
G1 X191.485 Y108.898 E0.14544 ; perimeter
M73 Q42 S79
G1 X188.583 Y105.440 E0.18596 ; perimeter
G1 X185.879 Y107.709 E0.14544 ; perimeter
G1 X185.025 Y106.692 E0.05471 ; perimeter
G1 X187.730 Y104.423 E0.14544 ; perimeter
G1 X185.281 Y101.504 E0.15696 ; perimeter
G1 X186.395 Y100.569 E0.05995 ; perimeter
G1 X195.902 Y111.898 E0.60929 ; perimeter
G1 X194.787 Y112.834 E0.05995 ; perimeter
G1 X192.338 Y109.915 E0.15696 ; perimeter
G1 X189.680 Y112.146 E0.14297 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.674 Y111.787 F10800.000 ; move inwards before travel
G1 F8640
G1 X188.780 Y111.167 E-0.30695 ; wipe and retract
G1 X190.283 Y109.906 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
G1 X165.460 Y138.939 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y138.745 E0.00799 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y138.939 E0.00799 ; perimeter
G1 X165.520 Y138.939 E0.17527 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y138.745 E-0.04687 ; wipe and retract
G1 X168.549 Y138.745 E-0.71313 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
G1 X140.358 Y138.884 ; move to first perimeter point
G1 Z8.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X140.358 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E1.28805 ; perimeter
G1 X196.141 Y117.764 E1.31878 ; perimeter
G1 X196.397 Y117.480 E0.01576 ; perimeter
G1 X196.621 Y117.160 E0.01609 ; perimeter
G1 X196.805 Y116.811 E0.01625 ; perimeter
G1 X196.941 Y116.439 E0.01633 ; perimeter
G1 X197.009 Y116.125 E0.01323 ; perimeter
G1 X197.039 Y115.798 E0.01354 ; perimeter
G1 X197.031 Y115.476 E0.01325 ; perimeter
G1 X196.968 Y115.132 E0.01440 ; perimeter
G1 X196.808 Y114.708 E0.01866 ; perimeter
G1 X196.658 Y114.461 E0.01192 ; perimeter
G1 X195.796 Y113.424 E0.05555 ; perimeter
G1 X196.306 Y112.996 E0.02741 ; perimeter
G1 X197.197 Y114.058 E0.05709 ; perimeter
G1 X197.395 Y114.336 E0.01409 ; perimeter
G1 X197.582 Y114.727 E0.01785 ; perimeter
G1 X197.670 Y115.037 E0.01325 ; perimeter
G1 X197.717 Y115.383 E0.01440 ; perimeter
G1 X197.710 Y115.857 E0.01952 ; perimeter
G1 X197.609 Y116.382 E0.02203 ; perimeter
G1 X197.495 Y116.722 E0.01478 ; perimeter
G1 X197.348 Y117.045 E0.01462 ; perimeter
G1 X197.150 Y117.385 E0.01620 ; perimeter
G1 X196.935 Y117.689 E0.01536 ; perimeter
G1 X196.701 Y117.963 E0.01486 ; perimeter
G1 X196.309 Y118.334 E0.02219 ; perimeter
G1 X171.819 Y138.884 E1.31704 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y139.335 E0.01859 ; perimeter
G1 X165.064 Y139.335 E0.21040 ; perimeter
G1 X165.064 Y138.884 E0.01859 ; perimeter
G1 X140.418 Y138.884 E1.01530 ; perimeter
M204 S1000 ; adjust acceleration
G1 X139.962 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X139.961 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E1.29844 ; perimeter
G1 X195.865 Y117.479 E1.31168 ; perimeter
G1 X196.086 Y117.232 E0.01364 ; perimeter
G1 X196.282 Y116.953 E0.01407 ; perimeter
G1 X196.442 Y116.650 E0.01410 ; perimeter
G1 X196.559 Y116.328 E0.01412 ; perimeter
G1 X196.617 Y116.064 E0.01112 ; perimeter
G1 X196.642 Y115.785 E0.01157 ; perimeter
G1 X196.635 Y115.517 E0.01104 ; perimeter
G1 X196.585 Y115.238 E0.01166 ; perimeter
G1 X196.450 Y114.882 E0.01567 ; perimeter
G1 X196.335 Y114.691 E0.00920 ; perimeter
G1 X195.239 Y113.374 E0.07059 ; perimeter
G1 X196.355 Y112.438 E0.05999 ; perimeter
G1 X197.510 Y113.815 E0.07407 ; perimeter
G1 X197.738 Y114.134 E0.01614 ; perimeter
G1 X197.954 Y114.586 E0.02065 ; perimeter
G1 X198.059 Y114.956 E0.01582 ; perimeter
G1 X198.121 Y115.492 E0.02223 ; perimeter
G1 X198.105 Y115.892 E0.01651 ; perimeter
G1 X197.992 Y116.487 E0.02495 ; perimeter
G1 X197.864 Y116.868 E0.01655 ; perimeter
G1 X197.700 Y117.227 E0.01626 ; perimeter
G1 X197.484 Y117.599 E0.01773 ; perimeter
G1 X197.248 Y117.933 E0.01685 ; perimeter
G1 X196.988 Y118.237 E0.01647 ; perimeter
G1 X196.573 Y118.630 E0.02354 ; perimeter
G1 X171.963 Y139.280 E1.32347 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y139.732 E0.01859 ; perimeter
G1 X164.667 Y139.732 E0.24306 ; perimeter
G1 X164.667 Y139.280 E0.01859 ; perimeter
G1 X140.022 Y139.280 E1.01529 ; perimeter
M204 S1000 ; adjust acceleration
G1 X140.164 Y138.935 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;9


G1 F8640
G1 X139.961 Y137.952 E-0.30696 ; wipe and retract
G1 X141.923 Y137.952 E-0.45304 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;9
G1 X84.255 Y100.968 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.940 Y100.968 E0.17774 ; perimeter
G1 X79.940 Y100.599 E0.01520 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y100.908 E0.01273 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.964 Y100.954 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.600 F10800.000 ; lift Z
G1 X108.783 Y100.738 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.99415 ; perimeter
G1 X84.651 Y101.364 E0.02580 ; perimeter
G1 X79.544 Y101.364 E0.21040 ; perimeter
G1 X79.544 Y100.738 E0.02580 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X53.271 Y80.075 E1.32425 ; perimeter
G1 X52.884 Y79.709 E0.02195 ; perimeter
G1 X52.560 Y79.318 E0.02093 ; perimeter
G1 X52.293 Y78.900 E0.02044 ; perimeter
G1 X52.086 Y78.462 E0.01994 ; perimeter
G1 X51.972 Y78.126 E0.01463 ; perimeter
G1 X51.870 Y77.587 E0.02258 ; perimeter
G1 X51.857 Y77.251 E0.01388 ; perimeter
G1 X51.910 Y76.785 E0.01931 ; perimeter
G1 X52.040 Y76.368 E0.01799 ; perimeter
G1 X52.138 Y76.159 E0.00951 ; perimeter
G1 X52.266 Y75.960 E0.00973 ; perimeter
G1 X53.278 Y74.740 E0.06530 ; perimeter
G1 X53.782 Y75.163 E0.02715 ; perimeter
G1 X53.017 Y76.076 E0.04909 ; perimeter
G1 X52.779 Y76.435 E0.01772 ; perimeter
G1 X52.614 Y76.867 E0.01907 ; perimeter
G1 X52.549 Y77.224 E0.01493 ; perimeter
G1 X52.542 Y77.557 E0.01372 ; perimeter
G1 X52.569 Y77.850 E0.01214 ; perimeter
G1 X52.639 Y78.177 E0.01376 ; perimeter
G1 X52.777 Y78.556 E0.01663 ; perimeter
G1 X52.965 Y78.910 E0.01653 ; perimeter
G1 X53.194 Y79.232 E0.01626 ; perimeter
G1 X53.429 Y79.495 E0.01454 ; perimeter
G1 X78.091 Y100.203 E1.32660 ; perimeter
G1 X108.783 Y100.203 E1.26439 ; perimeter
G1 X108.783 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X109.180 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.99417 ; perimeter
G1 X85.047 Y101.761 E0.02580 ; perimeter
G1 X79.147 Y101.761 E0.24305 ; perimeter
G1 X79.147 Y101.134 E0.02580 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X53.007 Y80.371 E1.33069 ; perimeter
G1 X52.594 Y79.980 E0.02343 ; perimeter
G1 X52.239 Y79.552 E0.02292 ; perimeter
G1 X51.945 Y79.092 E0.02248 ; perimeter
G1 X51.717 Y78.611 E0.02194 ; perimeter
G1 X51.588 Y78.226 E0.01672 ; perimeter
G1 X51.475 Y77.632 E0.02490 ; perimeter
G1 X51.460 Y77.236 E0.01635 ; perimeter
G1 X51.521 Y76.702 E0.02211 ; perimeter
G1 X51.670 Y76.224 E0.02065 ; perimeter
G1 X51.791 Y75.967 E0.01169 ; perimeter
G1 X51.945 Y75.726 E0.01181 ; perimeter
G1 X53.227 Y74.180 E0.08272 ; perimeter
G1 X54.341 Y75.115 E0.05990 ; perimeter
G1 X53.334 Y76.314 E0.06450 ; perimeter
G1 X53.133 Y76.617 E0.01499 ; perimeter
G1 X52.997 Y76.974 E0.01574 ; perimeter
G1 X52.945 Y77.263 E0.01212 ; perimeter
G1 X52.939 Y77.543 E0.01151 ; perimeter
G1 X52.962 Y77.791 E0.01026 ; perimeter
G1 X53.021 Y78.067 E0.01165 ; perimeter
G1 X53.140 Y78.395 E0.01435 ; perimeter
G1 X53.303 Y78.702 E0.01434 ; perimeter
G1 X53.504 Y78.984 E0.01427 ; perimeter
G1 X53.706 Y79.209 E0.01245 ; perimeter
G1 X78.235 Y99.806 E1.31950 ; perimeter
G1 X109.179 Y99.806 E1.27475 ; perimeter
G1 X109.180 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X108.780 Y101.129 F10800.000 ; move inwards before travel
G1 F8640
G1 X105.889 Y101.082 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.600 F10800.000 ; lift Z
G1 X59.893 Y73.363 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.194 Y71.098 E0.14517 ; perimeter
G1 X54.745 Y74.017 E0.15696 ; perimeter
G1 X54.237 Y73.591 E0.02729 ; perimeter
G1 X63.234 Y62.868 E0.57663 ; perimeter
G1 X63.742 Y63.294 E0.02729 ; perimeter
G1 X61.293 Y66.213 E0.15696 ; perimeter
G1 X63.992 Y68.478 E0.14517 ; perimeter
G1 X63.648 Y68.888 E0.02205 ; perimeter
G1 X60.949 Y66.623 E0.14517 ; perimeter
G1 X57.538 Y70.688 E0.21861 ; perimeter
G1 X60.237 Y72.953 E0.14517 ; perimeter
G1 X59.932 Y73.317 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.942 Y73.922 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X57.242 Y71.657 E0.14517 ; perimeter
G1 X54.793 Y74.575 E0.15696 ; perimeter
G1 X53.679 Y73.640 E0.05995 ; perimeter
G1 X63.185 Y62.310 E0.60929 ; perimeter
G1 X64.300 Y63.245 E0.05995 ; perimeter
G1 X61.851 Y66.164 E0.15696 ; perimeter
G1 X64.551 Y68.429 E0.14517 ; perimeter
G1 X63.697 Y69.447 E0.05471 ; perimeter
G1 X60.998 Y67.181 E0.14517 ; perimeter
G1 X58.096 Y70.639 E0.18596 ; perimeter
G1 X60.795 Y72.904 E0.14517 ; perimeter
G1 X59.980 Y73.876 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.668 Y73.630 F10800.000 ; move inwards before travel
G1 F8640
G1 X57.423 Y71.803 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.600 F10800.000 ; lift Z
G1 X102.812 Y81.038 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.20452 ; perimeter
G1 X97.847 Y80.669 E0.01520 ; perimeter
G1 X102.812 Y80.669 E0.20452 ; perimeter
G1 X102.812 Y80.978 E0.01273 ; perimeter
M204 S1000 ; adjust acceleration
G1 X103.208 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.31379 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21163 ; perimeter
G1 X67.759 Y62.404 E0.75143 ; perimeter
G1 X67.306 Y62.139 E0.02162 ; perimeter
G1 X66.823 Y61.955 E0.02127 ; perimeter
G1 X66.329 Y61.859 E0.02076 ; perimeter
G1 X65.840 Y61.853 E0.02013 ; perimeter
G1 X65.381 Y61.936 E0.01922 ; perimeter
G1 X65.036 Y62.063 E0.01515 ; perimeter
G1 X64.783 Y62.214 E0.01214 ; perimeter
G1 X64.227 Y61.748 E0.02990 ; perimeter
G1 X64.530 Y61.529 E0.01539 ; perimeter
G1 X64.825 Y61.387 E0.01348 ; perimeter
G1 X65.282 Y61.251 E0.01965 ; perimeter
G1 X65.623 Y61.205 E0.01418 ; perimeter
G1 X66.149 Y61.211 E0.02168 ; perimeter
G1 X66.515 Y61.266 E0.01524 ; perimeter
G1 X66.986 Y61.395 E0.02011 ; perimeter
G1 X67.548 Y61.640 E0.02526 ; perimeter
G1 X68.050 Y61.952 E0.02435 ; perimeter
G1 X68.305 Y62.149 E0.01327 ; perimeter
G1 X81.934 Y73.586 E0.73293 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y80.272 E0.02580 ; perimeter
G1 X103.208 Y80.272 E0.23718 ; perimeter
G1 X103.208 Y81.374 E0.04538 ; perimeter
M204 S1000 ; adjust acceleration
G1 X103.605 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.33606 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21163 ; perimeter
G1 X67.530 Y62.730 E0.75599 ; perimeter
G1 X67.134 Y62.498 E0.01889 ; perimeter
G1 X66.714 Y62.338 E0.01852 ; perimeter
G1 X66.288 Y62.255 E0.01788 ; perimeter
G1 X65.873 Y62.250 E0.01710 ; perimeter
G1 X65.485 Y62.320 E0.01622 ; perimeter
G1 X65.208 Y62.422 E0.01220 ; perimeter
G1 X64.880 Y62.618 E0.01574 ; perimeter
G1 X64.771 Y62.722 E0.00618 ; perimeter
G1 X63.638 Y61.771 E0.06094 ; perimeter
G1 X64.008 Y61.408 E0.02137 ; perimeter
G1 X64.330 Y61.186 E0.01611 ; perimeter
G1 X64.681 Y61.016 E0.01605 ; perimeter
G1 X65.199 Y60.862 E0.02224 ; perimeter
G1 X65.594 Y60.809 E0.01646 ; perimeter
G1 X66.191 Y60.816 E0.02458 ; perimeter
G1 X66.598 Y60.878 E0.01694 ; perimeter
G1 X67.113 Y61.019 E0.02200 ; perimeter
G1 X67.741 Y61.293 E0.02823 ; perimeter
G1 X68.276 Y61.627 E0.02601 ; perimeter
G1 X68.553 Y61.841 E0.01442 ; perimeter
G1 X82.078 Y73.189 E0.72731 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y79.876 E0.02580 ; perimeter
G1 X103.605 Y79.876 E0.26983 ; perimeter
G1 X103.605 Y81.770 E0.07804 ; perimeter
M204 S1000 ; adjust acceleration
G1 X103.206 Y81.792 F10800.000 ; move inwards before travel
G1 F8640
G1 X100.313 Y81.794 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.600 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.600 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.600 F10800.000 ; lift Z
G1 X147.188 Y81.038 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X147.188 Y80.669 E0.01520 ; perimeter
G1 X152.153 Y80.669 E0.20452 ; perimeter
G1 X152.153 Y81.038 E0.01520 ; perimeter
G1 X147.248 Y81.038 E0.20205 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.792 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X146.792 Y80.272 E0.04785 ; perimeter
G1 X152.549 Y80.272 E0.23718 ; perimeter
G1 X152.549 Y80.899 E0.02580 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X181.694 Y62.150 E0.73287 ; perimeter
G1 X182.232 Y61.764 E0.02728 ; perimeter
G1 X182.560 Y61.584 E0.01540 ; perimeter
G1 X182.908 Y61.434 E0.01562 ; perimeter
G1 X183.481 Y61.266 E0.02460 ; perimeter
G1 X183.836 Y61.213 E0.01479 ; perimeter
G1 X184.384 Y61.206 E0.02258 ; perimeter
G1 X184.724 Y61.252 E0.01413 ; perimeter
G1 X185.055 Y61.343 E0.01417 ; perimeter
G1 X185.471 Y61.532 E0.01881 ; perimeter
G1 X185.773 Y61.748 E0.01529 ; perimeter
G1 X185.217 Y62.214 E0.02991 ; perimeter
G1 X184.956 Y62.058 E0.01254 ; perimeter
G1 X184.496 Y61.905 E0.01995 ; perimeter
G1 X184.014 Y61.848 E0.02000 ; perimeter
G1 X183.658 Y61.861 E0.01467 ; perimeter
G1 X183.089 Y61.983 E0.02397 ; perimeter
G1 X182.689 Y62.142 E0.01774 ; perimeter
G1 X182.217 Y62.421 E0.02260 ; perimeter
G1 X168.261 Y74.121 E0.75022 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X146.852 Y81.434 E0.31131 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.395 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X146.395 Y79.876 E0.08051 ; perimeter
G1 X152.945 Y79.876 E0.26983 ; perimeter
G1 X152.945 Y80.502 E0.02580 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X181.446 Y61.841 E0.72729 ; perimeter
G1 X181.776 Y61.589 E0.01711 ; perimeter
G1 X182.028 Y61.424 E0.01241 ; perimeter
G1 X182.385 Y61.228 E0.01677 ; perimeter
G1 X182.765 Y61.064 E0.01704 ; perimeter
G1 X183.401 Y60.878 E0.02731 ; perimeter
G1 X183.804 Y60.817 E0.01678 ; perimeter
G1 X184.408 Y60.809 E0.02490 ; perimeter
G1 X184.804 Y60.863 E0.01644 ; perimeter
G1 X185.191 Y60.970 E0.01654 ; perimeter
G1 X185.670 Y61.187 E0.02169 ; perimeter
G1 X186.071 Y61.473 E0.02029 ; perimeter
G1 X186.362 Y61.771 E0.01716 ; perimeter
G1 X185.229 Y62.722 E0.06094 ; perimeter
G1 X185.120 Y62.618 E0.00618 ; perimeter
G1 X184.789 Y62.420 E0.01588 ; perimeter
G1 X184.410 Y62.293 E0.01649 ; perimeter
G1 X183.998 Y62.245 E0.01707 ; perimeter
G1 X183.707 Y62.255 E0.01198 ; perimeter
G1 X183.205 Y62.364 E0.02117 ; perimeter
G1 X182.864 Y62.499 E0.01511 ; perimeter
G1 X182.447 Y62.746 E0.01998 ; perimeter
G1 X168.405 Y74.517 E0.75482 ; perimeter
G1 X163.268 Y74.517 E0.21163 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X146.455 Y81.830 E0.33359 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.546 Y81.460 F10800.000 ; move inwards before travel
G1 F8640
G1 X146.395 Y79.876 E-0.45148 ; wipe and retract
G1 X147.732 Y79.876 E-0.30852 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.600 F10800.000 ; lift Z
G1 X190.107 Y73.363 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X189.763 Y72.953 E0.02205 ; perimeter
G1 X192.462 Y70.688 E0.14517 ; perimeter
G1 X189.051 Y66.623 E0.21861 ; perimeter
G1 X186.352 Y68.888 E0.14517 ; perimeter
G1 X186.008 Y68.478 E0.02205 ; perimeter
G1 X188.707 Y66.213 E0.14517 ; perimeter
G1 X186.258 Y63.294 E0.15696 ; perimeter
G1 X186.766 Y62.868 E0.02729 ; perimeter
G1 X195.763 Y73.591 E0.57663 ; perimeter
G1 X195.256 Y74.017 E0.02729 ; perimeter
G1 X192.806 Y71.098 E0.15696 ; perimeter
G1 X190.153 Y73.325 E0.14270 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.058 Y73.922 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X189.204 Y72.904 E0.05471 ; perimeter
G1 X191.904 Y70.639 E0.14517 ; perimeter
G1 X189.002 Y67.181 E0.18596 ; perimeter
G1 X186.303 Y69.447 E0.14517 ; perimeter
G1 X185.449 Y68.429 E0.05471 ; perimeter
G1 X188.149 Y66.164 E0.14517 ; perimeter
G1 X185.700 Y63.245 E0.15696 ; perimeter
G1 X186.815 Y62.310 E0.05995 ; perimeter
G1 X196.321 Y73.640 E0.60929 ; perimeter
G1 X195.207 Y74.575 E0.05995 ; perimeter
G1 X192.758 Y71.657 E0.15696 ; perimeter
G1 X190.104 Y73.883 E0.14270 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.098 Y73.524 F10800.000 ; move inwards before travel
G1 F8640
G1 X189.204 Y72.904 E-0.30695 ; wipe and retract
G1 X190.708 Y71.643 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.600 F10800.000 ; lift Z
G1 X165.745 Y100.968 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y100.599 E0.01520 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y100.968 E0.01520 ; perimeter
G1 X165.805 Y100.968 E0.17527 ; perimeter
M73 P43 R76
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y100.599 E-0.08631 ; wipe and retract
G1 X168.663 Y100.599 E-0.67369 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.600 F10800.000 ; lift Z
G1 X141.217 Y100.738 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X141.217 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E1.26439 ; perimeter
G1 X196.571 Y79.495 E1.32660 ; perimeter
G1 X196.806 Y79.232 E0.01454 ; perimeter
G1 X197.035 Y78.910 E0.01626 ; perimeter
G1 X197.223 Y78.556 E0.01653 ; perimeter
G1 X197.361 Y78.177 E0.01663 ; perimeter
G1 X197.431 Y77.850 E0.01376 ; perimeter
G1 X197.458 Y77.557 E0.01214 ; perimeter
G1 X197.451 Y77.224 E0.01372 ; perimeter
G1 X197.386 Y76.867 E0.01493 ; perimeter
G1 X197.226 Y76.446 E0.01856 ; perimeter
G1 X197.075 Y76.199 E0.01193 ; perimeter
G1 X196.215 Y75.165 E0.05538 ; perimeter
G1 X196.725 Y74.737 E0.02741 ; perimeter
G1 X197.616 Y75.799 E0.05708 ; perimeter
G1 X197.817 Y76.082 E0.01428 ; perimeter
G1 X198.001 Y76.467 E0.01761 ; perimeter
G1 X198.090 Y76.782 E0.01348 ; perimeter
G1 X198.134 Y77.111 E0.01369 ; perimeter
G1 X198.128 Y77.611 E0.02060 ; perimeter
G1 X198.030 Y78.119 E0.02132 ; perimeter
G1 X197.913 Y78.466 E0.01507 ; perimeter
G1 X197.761 Y78.797 E0.01498 ; perimeter
G1 X197.579 Y79.112 E0.01502 ; perimeter
G1 X197.359 Y79.425 E0.01576 ; perimeter
G1 X197.119 Y79.706 E0.01520 ; perimeter
G1 X196.729 Y80.075 E0.02215 ; perimeter
G1 X172.104 Y100.738 E1.32425 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y101.364 E0.02580 ; perimeter
G1 X165.349 Y101.364 E0.21040 ; perimeter
G1 X165.349 Y100.738 E0.02580 ; perimeter
G1 X141.277 Y100.738 E0.99168 ; perimeter
M204 S1000 ; adjust acceleration
G1 X140.820 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X140.821 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E1.27475 ; perimeter
G1 X196.294 Y79.209 E1.31950 ; perimeter
G1 X196.496 Y78.984 E0.01245 ; perimeter
G1 X196.697 Y78.702 E0.01427 ; perimeter
G1 X196.860 Y78.395 E0.01434 ; perimeter
G1 X196.979 Y78.067 E0.01435 ; perimeter
G1 X197.038 Y77.791 E0.01165 ; perimeter
G1 X197.061 Y77.543 E0.01026 ; perimeter
G1 X197.055 Y77.263 E0.01151 ; perimeter
G1 X197.003 Y76.974 E0.01212 ; perimeter
G1 X196.868 Y76.621 E0.01555 ; perimeter
G1 X196.752 Y76.430 E0.00923 ; perimeter
G1 X195.658 Y75.115 E0.07044 ; perimeter
G1 X196.774 Y74.179 E0.05999 ; perimeter
G1 X197.930 Y75.556 E0.07407 ; perimeter
G1 X198.159 Y75.880 E0.01634 ; perimeter
G1 X198.373 Y76.326 E0.02041 ; perimeter
G1 X198.479 Y76.701 E0.01605 ; perimeter
G1 X198.531 Y77.087 E0.01604 ; perimeter
G1 X198.524 Y77.641 E0.02281 ; perimeter
G1 X198.413 Y78.224 E0.02445 ; perimeter
G1 X198.282 Y78.612 E0.01688 ; perimeter
G1 X198.114 Y78.979 E0.01662 ; perimeter
G1 X197.913 Y79.326 E0.01651 ; perimeter
G1 X197.672 Y79.668 E0.01725 ; perimeter
G1 X197.407 Y79.979 E0.01684 ; perimeter
G1 X196.993 Y80.371 E0.02350 ; perimeter
G1 X172.248 Y101.134 E1.33069 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y101.761 E0.02580 ; perimeter
G1 X164.953 Y101.761 E0.24306 ; perimeter
G1 X164.953 Y101.134 E0.02580 ; perimeter
G1 X140.880 Y101.134 E0.99170 ; perimeter
M204 S1000 ; adjust acceleration
G1 X141.023 Y100.790 F10800.000 ; move inwards before travel
G1 F8640
G1 X140.821 Y99.806 E-0.30694 ; wipe and retract
G1 X142.783 Y99.806 E-0.45306 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.600 F10800.000 ; lift Z
G1 X83.970 Y139.114 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.655 Y139.114 E0.17774 ; perimeter
G1 X79.655 Y138.745 E0.01520 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y139.054 E0.01273 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.678 Y139.100 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.600 F10800.000 ; lift Z
G1 X108.498 Y138.884 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.99415 ; perimeter
G1 X84.366 Y139.510 E0.02580 ; perimeter
G1 X79.259 Y139.510 E0.21040 ; perimeter
G1 X79.259 Y138.884 E0.02580 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X52.986 Y118.221 E1.32425 ; perimeter
G1 X52.599 Y117.855 E0.02195 ; perimeter
G1 X52.275 Y117.464 E0.02093 ; perimeter
G1 X52.008 Y117.046 E0.02044 ; perimeter
G1 X51.800 Y116.609 E0.01994 ; perimeter
G1 X51.687 Y116.272 E0.01463 ; perimeter
G1 X51.585 Y115.733 E0.02258 ; perimeter
G1 X51.572 Y115.397 E0.01388 ; perimeter
G1 X51.625 Y114.931 E0.01931 ; perimeter
G1 X51.755 Y114.514 E0.01799 ; perimeter
G1 X51.853 Y114.305 E0.00951 ; perimeter
G1 X51.981 Y114.106 E0.00973 ; perimeter
G1 X52.992 Y112.886 E0.06530 ; perimeter
G1 X53.497 Y113.310 E0.02715 ; perimeter
G1 X52.731 Y114.222 E0.04909 ; perimeter
G1 X52.493 Y114.581 E0.01772 ; perimeter
G1 X52.329 Y115.013 E0.01907 ; perimeter
G1 X52.264 Y115.370 E0.01493 ; perimeter
G1 X52.257 Y115.703 E0.01372 ; perimeter
G1 X52.284 Y115.996 E0.01214 ; perimeter
G1 X52.354 Y116.323 E0.01376 ; perimeter
G1 X52.492 Y116.702 E0.01663 ; perimeter
G1 X52.680 Y117.057 E0.01653 ; perimeter
G1 X52.909 Y117.379 E0.01626 ; perimeter
G1 X53.144 Y117.641 E0.01454 ; perimeter
G1 X77.806 Y138.349 E1.32660 ; perimeter
G1 X108.498 Y138.349 E1.26439 ; perimeter
G1 X108.498 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X108.895 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.99417 ; perimeter
G1 X84.762 Y139.907 E0.02580 ; perimeter
G1 X78.862 Y139.907 E0.24305 ; perimeter
G1 X78.862 Y139.280 E0.02580 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X52.722 Y118.517 E1.33069 ; perimeter
G1 X52.309 Y118.126 E0.02343 ; perimeter
G1 X51.954 Y117.698 E0.02292 ; perimeter
G1 X51.660 Y117.238 E0.02248 ; perimeter
G1 X51.432 Y116.757 E0.02194 ; perimeter
G1 X51.303 Y116.372 E0.01672 ; perimeter
G1 X51.190 Y115.778 E0.02490 ; perimeter
G1 X51.174 Y115.382 E0.01635 ; perimeter
G1 X51.236 Y114.849 E0.02211 ; perimeter
G1 X51.385 Y114.370 E0.02065 ; perimeter
G1 X51.505 Y114.113 E0.01169 ; perimeter
G1 X51.660 Y113.872 E0.01181 ; perimeter
G1 X52.942 Y112.326 E0.08272 ; perimeter
G1 X54.056 Y113.261 E0.05990 ; perimeter
G1 X53.049 Y114.460 E0.06450 ; perimeter
G1 X52.848 Y114.763 E0.01499 ; perimeter
G1 X52.712 Y115.120 E0.01574 ; perimeter
G1 X52.660 Y115.410 E0.01212 ; perimeter
G1 X52.654 Y115.689 E0.01151 ; perimeter
G1 X52.677 Y115.937 E0.01026 ; perimeter
G1 X52.735 Y116.213 E0.01165 ; perimeter
G1 X52.855 Y116.541 E0.01435 ; perimeter
G1 X53.018 Y116.848 E0.01434 ; perimeter
G1 X53.219 Y117.131 E0.01427 ; perimeter
G1 X53.421 Y117.355 E0.01245 ; perimeter
G1 X77.950 Y137.952 E1.31950 ; perimeter
G1 X108.894 Y137.952 E1.27475 ; perimeter
G1 X108.895 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X108.495 Y139.275 F10800.000 ; move inwards before travel
G1 F8640
G1 X105.604 Y139.229 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.600 F10800.000 ; lift Z
G1 X59.608 Y111.510 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X56.908 Y109.244 E0.14517 ; perimeter
G1 X54.459 Y112.163 E0.15696 ; perimeter
G1 X53.952 Y111.737 E0.02729 ; perimeter
G1 X62.949 Y101.015 E0.57663 ; perimeter
G1 X63.457 Y101.440 E0.02729 ; perimeter
G1 X61.008 Y104.359 E0.15696 ; perimeter
G1 X63.707 Y106.624 E0.14517 ; perimeter
G1 X63.363 Y107.034 E0.02205 ; perimeter
G1 X60.664 Y104.769 E0.14517 ; perimeter
G1 X57.252 Y108.834 E0.21861 ; perimeter
G1 X59.952 Y111.099 E0.14517 ; perimeter
G1 X59.646 Y111.464 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.657 Y112.068 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X56.957 Y109.803 E0.14517 ; perimeter
G1 X54.508 Y112.721 E0.15696 ; perimeter
G1 X53.393 Y111.786 E0.05995 ; perimeter
G1 X62.900 Y100.456 E0.60929 ; perimeter
G1 X64.015 Y101.392 E0.05995 ; perimeter
G1 X61.566 Y104.310 E0.15696 ; perimeter
G1 X64.265 Y106.575 E0.14517 ; perimeter
G1 X63.412 Y107.593 E0.05471 ; perimeter
G1 X60.712 Y105.328 E0.14517 ; perimeter
G1 X57.811 Y108.785 E0.18596 ; perimeter
G1 X60.510 Y111.051 E0.14517 ; perimeter
G1 X59.695 Y112.022 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.383 Y111.776 F10800.000 ; move inwards before travel
G1 F8640
G1 X57.138 Y109.949 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.600 F10800.000 ; lift Z
G1 X102.527 Y119.184 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.20452 ; perimeter
G1 X97.562 Y118.815 E0.01520 ; perimeter
G1 X102.527 Y118.815 E0.20452 ; perimeter
G1 X102.527 Y119.124 E0.01273 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.923 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.31379 ; perimeter
M73 Q43 S78
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21163 ; perimeter
G1 X67.473 Y100.550 E0.75143 ; perimeter
G1 X67.020 Y100.286 E0.02162 ; perimeter
G1 X66.538 Y100.102 E0.02127 ; perimeter
G1 X66.043 Y100.005 E0.02076 ; perimeter
G1 X65.555 Y99.999 E0.02013 ; perimeter
G1 X65.096 Y100.082 E0.01922 ; perimeter
G1 X64.751 Y100.209 E0.01515 ; perimeter
G1 X64.498 Y100.360 E0.01214 ; perimeter
G1 X63.942 Y99.894 E0.02990 ; perimeter
G1 X64.245 Y99.676 E0.01539 ; perimeter
G1 X64.540 Y99.533 E0.01348 ; perimeter
G1 X64.997 Y99.397 E0.01965 ; perimeter
G1 X65.338 Y99.351 E0.01418 ; perimeter
G1 X65.864 Y99.357 E0.02168 ; perimeter
G1 X66.230 Y99.412 E0.01524 ; perimeter
G1 X66.701 Y99.541 E0.02011 ; perimeter
G1 X67.263 Y99.786 E0.02526 ; perimeter
G1 X67.765 Y100.099 E0.02435 ; perimeter
G1 X68.020 Y100.296 E0.01327 ; perimeter
G1 X81.649 Y111.732 E0.73293 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y118.418 E0.02580 ; perimeter
G1 X102.923 Y118.418 E0.23718 ; perimeter
G1 X102.923 Y119.520 E0.04538 ; perimeter
M204 S1000 ; adjust acceleration
G1 X103.319 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.33606 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21163 ; perimeter
G1 X67.244 Y100.876 E0.75599 ; perimeter
G1 X66.849 Y100.644 E0.01889 ; perimeter
G1 X66.429 Y100.484 E0.01852 ; perimeter
G1 X66.003 Y100.401 E0.01788 ; perimeter
G1 X65.588 Y100.396 E0.01710 ; perimeter
G1 X65.200 Y100.466 E0.01622 ; perimeter
G1 X64.923 Y100.568 E0.01220 ; perimeter
G1 X64.595 Y100.764 E0.01574 ; perimeter
G1 X64.486 Y100.868 E0.00618 ; perimeter
G1 X63.353 Y99.917 E0.06094 ; perimeter
G1 X63.723 Y99.554 E0.02137 ; perimeter
G1 X64.045 Y99.332 E0.01611 ; perimeter
G1 X64.396 Y99.162 E0.01605 ; perimeter
G1 X64.913 Y99.009 E0.02224 ; perimeter
G1 X65.309 Y98.955 E0.01646 ; perimeter
G1 X65.906 Y98.962 E0.02458 ; perimeter
G1 X66.312 Y99.024 E0.01694 ; perimeter
G1 X66.827 Y99.165 E0.02200 ; perimeter
G1 X67.455 Y99.439 E0.02823 ; perimeter
G1 X67.991 Y99.773 E0.02601 ; perimeter
G1 X68.268 Y99.987 E0.01442 ; perimeter
G1 X81.793 Y111.335 E0.72731 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y118.022 E0.02580 ; perimeter
G1 X103.319 Y118.022 E0.26983 ; perimeter
G1 X103.319 Y119.916 E0.07804 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.921 Y119.938 F10800.000 ; move inwards before travel
G1 F8640
G1 X100.028 Y119.941 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.600 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.600 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.600 F10800.000 ; lift Z
G1 X146.903 Y119.184 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X146.903 Y118.815 E0.01520 ; perimeter
G1 X151.868 Y118.815 E0.20452 ; perimeter
G1 X151.868 Y119.184 E0.01520 ; perimeter
G1 X146.963 Y119.184 E0.20205 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.507 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X146.507 Y118.418 E0.04785 ; perimeter
G1 X152.264 Y118.418 E0.23718 ; perimeter
G1 X152.264 Y119.045 E0.02580 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X181.409 Y100.297 E0.73287 ; perimeter
G1 X181.947 Y99.911 E0.02728 ; perimeter
G1 X182.275 Y99.730 E0.01540 ; perimeter
G1 X182.623 Y99.580 E0.01562 ; perimeter
G1 X183.196 Y99.413 E0.02460 ; perimeter
G1 X183.551 Y99.359 E0.01479 ; perimeter
G1 X184.099 Y99.352 E0.02258 ; perimeter
G1 X184.439 Y99.398 E0.01413 ; perimeter
G1 X184.770 Y99.490 E0.01417 ; perimeter
G1 X185.186 Y99.678 E0.01881 ; perimeter
G1 X185.488 Y99.894 E0.01529 ; perimeter
G1 X184.932 Y100.360 E0.02991 ; perimeter
G1 X184.670 Y100.204 E0.01254 ; perimeter
G1 X184.211 Y100.051 E0.01995 ; perimeter
G1 X183.729 Y99.994 E0.02000 ; perimeter
G1 X183.373 Y100.007 E0.01467 ; perimeter
G1 X182.804 Y100.129 E0.02397 ; perimeter
G1 X182.404 Y100.288 E0.01774 ; perimeter
G1 X181.932 Y100.567 E0.02260 ; perimeter
G1 X167.976 Y112.267 E0.75022 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X146.567 Y119.580 E0.31131 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.110 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X146.110 Y118.022 E0.08051 ; perimeter
G1 X152.660 Y118.022 E0.26983 ; perimeter
G1 X152.660 Y118.648 E0.02580 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X181.161 Y99.987 E0.72729 ; perimeter
G1 X181.491 Y99.735 E0.01711 ; perimeter
G1 X181.743 Y99.570 E0.01241 ; perimeter
G1 X182.100 Y99.374 E0.01677 ; perimeter
G1 X182.479 Y99.210 E0.01704 ; perimeter
G1 X183.116 Y99.024 E0.02731 ; perimeter
G1 X183.519 Y98.963 E0.01678 ; perimeter
G1 X184.123 Y98.955 E0.02490 ; perimeter
G1 X184.518 Y99.009 E0.01644 ; perimeter
G1 X184.905 Y99.116 E0.01654 ; perimeter
G1 X185.385 Y99.333 E0.02169 ; perimeter
G1 X185.786 Y99.619 E0.02029 ; perimeter
G1 X186.077 Y99.917 E0.01716 ; perimeter
G1 X184.944 Y100.868 E0.06094 ; perimeter
G1 X184.835 Y100.764 E0.00618 ; perimeter
G1 X184.504 Y100.567 E0.01588 ; perimeter
G1 X184.124 Y100.440 E0.01649 ; perimeter
G1 X183.713 Y100.391 E0.01707 ; perimeter
G1 X183.422 Y100.402 E0.01198 ; perimeter
G1 X182.920 Y100.510 E0.02117 ; perimeter
G1 X182.579 Y100.645 E0.01511 ; perimeter
G1 X182.162 Y100.892 E0.01998 ; perimeter
G1 X168.120 Y112.663 E0.75482 ; perimeter
G1 X162.983 Y112.663 E0.21163 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X146.170 Y119.976 E0.33359 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.261 Y119.606 F10800.000 ; move inwards before travel
G1 F8640
G1 X146.110 Y118.022 E-0.45148 ; wipe and retract
G1 X147.446 Y118.022 E-0.30852 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.600 F10800.000 ; lift Z
G1 X189.822 Y111.510 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X189.478 Y111.099 E0.02205 ; perimeter
G1 X192.177 Y108.834 E0.14517 ; perimeter
G1 X188.766 Y104.769 E0.21861 ; perimeter
G1 X186.067 Y107.034 E0.14517 ; perimeter
G1 X185.723 Y106.624 E0.02205 ; perimeter
G1 X188.422 Y104.359 E0.14517 ; perimeter
G1 X185.973 Y101.440 E0.15696 ; perimeter
G1 X186.481 Y101.015 E0.02729 ; perimeter
G1 X195.478 Y111.737 E0.57663 ; perimeter
G1 X194.970 Y112.163 E0.02729 ; perimeter
G1 X192.521 Y109.244 E0.15696 ; perimeter
G1 X189.868 Y111.471 E0.14270 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.773 Y112.068 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X188.919 Y111.051 E0.05471 ; perimeter
G1 X191.619 Y108.785 E0.14517 ; perimeter
G1 X188.717 Y105.328 E0.18596 ; perimeter
G1 X186.018 Y107.593 E0.14517 ; perimeter
G1 X185.164 Y106.575 E0.05471 ; perimeter
G1 X187.864 Y104.310 E0.14517 ; perimeter
G1 X185.415 Y101.392 E0.15696 ; perimeter
G1 X186.529 Y100.456 E0.05995 ; perimeter
G1 X196.036 Y111.786 E0.60929 ; perimeter
G1 X194.921 Y112.721 E0.05995 ; perimeter
G1 X192.472 Y109.803 E0.15696 ; perimeter
G1 X189.819 Y112.029 E0.14270 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.813 Y111.670 F10800.000 ; move inwards before travel
G1 F8640
G1 X188.919 Y111.051 E-0.30695 ; wipe and retract
G1 X190.422 Y109.789 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.600 F10800.000 ; lift Z
G1 X165.460 Y139.114 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y138.745 E0.01520 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y139.114 E0.01520 ; perimeter
G1 X165.520 Y139.114 E0.17527 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y138.745 E-0.08631 ; wipe and retract
G1 X168.378 Y138.745 E-0.67369 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.600 F10800.000 ; lift Z
G1 X140.931 Y138.884 ; move to first perimeter point
G1 Z9.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X140.932 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E1.26439 ; perimeter
G1 X196.285 Y117.641 E1.32660 ; perimeter
G1 X196.521 Y117.379 E0.01454 ; perimeter
G1 X196.750 Y117.057 E0.01626 ; perimeter
G1 X196.938 Y116.702 E0.01653 ; perimeter
G1 X197.076 Y116.323 E0.01663 ; perimeter
G1 X197.146 Y115.996 E0.01376 ; perimeter
G1 X197.172 Y115.703 E0.01214 ; perimeter
G1 X197.166 Y115.370 E0.01372 ; perimeter
G1 X197.101 Y115.013 E0.01493 ; perimeter
G1 X196.941 Y114.592 E0.01856 ; perimeter
G1 X196.790 Y114.345 E0.01193 ; perimeter
G1 X195.930 Y113.311 E0.05538 ; perimeter
G1 X196.440 Y112.884 E0.02741 ; perimeter
G1 X197.331 Y113.945 E0.05708 ; perimeter
G1 X197.531 Y114.228 E0.01428 ; perimeter
G1 X197.716 Y114.613 E0.01761 ; perimeter
G1 X197.805 Y114.928 E0.01348 ; perimeter
G1 X197.849 Y115.257 E0.01369 ; perimeter
G1 X197.843 Y115.757 E0.02060 ; perimeter
G1 X197.744 Y116.265 E0.02132 ; perimeter
G1 X197.628 Y116.612 E0.01507 ; perimeter
G1 X197.476 Y116.943 E0.01498 ; perimeter
G1 X197.293 Y117.258 E0.01502 ; perimeter
G1 X197.073 Y117.571 E0.01576 ; perimeter
G1 X196.834 Y117.852 E0.01520 ; perimeter
G1 X196.444 Y118.221 E0.02215 ; perimeter
G1 X171.819 Y138.884 E1.32425 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y139.510 E0.02580 ; perimeter
G1 X165.064 Y139.510 E0.21040 ; perimeter
G1 X165.064 Y138.884 E0.02580 ; perimeter
G1 X140.991 Y138.884 E0.99168 ; perimeter
M204 S1000 ; adjust acceleration
G1 X140.535 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X140.536 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E1.27475 ; perimeter
G1 X196.009 Y117.355 E1.31950 ; perimeter
G1 X196.211 Y117.131 E0.01245 ; perimeter
G1 X196.412 Y116.848 E0.01427 ; perimeter
G1 X196.575 Y116.541 E0.01434 ; perimeter
G1 X196.694 Y116.213 E0.01435 ; perimeter
G1 X196.753 Y115.937 E0.01165 ; perimeter
G1 X196.776 Y115.689 E0.01026 ; perimeter
G1 X196.770 Y115.410 E0.01151 ; perimeter
G1 X196.717 Y115.120 E0.01212 ; perimeter
G1 X196.583 Y114.767 E0.01555 ; perimeter
G1 X196.467 Y114.576 E0.00923 ; perimeter
G1 X195.373 Y113.261 E0.07044 ; perimeter
G1 X196.489 Y112.325 E0.05999 ; perimeter
G1 X197.644 Y113.703 E0.07407 ; perimeter
G1 X197.874 Y114.026 E0.01634 ; perimeter
G1 X198.088 Y114.473 E0.02041 ; perimeter
G1 X198.194 Y114.848 E0.01605 ; perimeter
G1 X198.245 Y115.234 E0.01604 ; perimeter
G1 X198.239 Y115.787 E0.02281 ; perimeter
G1 X198.127 Y116.370 E0.02445 ; perimeter
G1 X197.997 Y116.758 E0.01688 ; perimeter
G1 X197.829 Y117.125 E0.01662 ; perimeter
G1 X197.628 Y117.472 E0.01651 ; perimeter
G1 X197.387 Y117.814 E0.01725 ; perimeter
G1 X197.122 Y118.125 E0.01684 ; perimeter
G1 X196.707 Y118.517 E0.02350 ; perimeter
G1 X171.963 Y139.280 E1.33069 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y139.907 E0.02580 ; perimeter
G1 X164.667 Y139.907 E0.24306 ; perimeter
G1 X164.667 Y139.280 E0.02580 ; perimeter
G1 X140.595 Y139.280 E0.99170 ; perimeter
M204 S1000 ; adjust acceleration
G1 X140.738 Y138.936 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;9.25


G1 F8640
G1 X140.536 Y137.952 E-0.30694 ; wipe and retract
G1 X142.498 Y137.952 E-0.45306 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;9.25
G1 X84.255 Y101.143 ; move to first perimeter point
G1 Z9.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.940 Y101.143 E0.17774 ; perimeter
G1 X79.940 Y100.599 E0.02241 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y101.083 E0.01994 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.964 Y101.129 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.850 F10800.000 ; lift Z
G1 X108.210 Y100.738 ; move to first perimeter point
G1 Z9.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.97055 ; perimeter
G1 X84.651 Y101.539 E0.03301 ; perimeter
G1 X79.544 Y101.539 E0.21040 ; perimeter
G1 X79.544 Y100.738 E0.03301 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X53.137 Y79.963 E1.33146 ; perimeter
G1 X52.751 Y79.597 E0.02192 ; perimeter
G1 X52.427 Y79.206 E0.02089 ; perimeter
G1 X52.160 Y78.789 E0.02041 ; perimeter
G1 X51.953 Y78.353 E0.01990 ; perimeter
G1 X51.837 Y78.008 E0.01497 ; perimeter
G1 X51.737 Y77.479 E0.02219 ; perimeter
G1 X51.723 Y77.135 E0.01419 ; perimeter
G1 X51.775 Y76.676 E0.01904 ; perimeter
G1 X51.902 Y76.264 E0.01776 ; perimeter
G1 X52.007 Y76.042 E0.01012 ; perimeter
G1 X52.134 Y75.844 E0.00969 ; perimeter
G1 X53.143 Y74.627 E0.06512 ; perimeter
G1 X53.648 Y75.051 E0.02715 ; perimeter
G1 X52.883 Y75.963 E0.04907 ; perimeter
G1 X52.646 Y76.319 E0.01759 ; perimeter
G1 X52.481 Y76.748 E0.01895 ; perimeter
G1 X52.414 Y77.117 E0.01545 ; perimeter
G1 X52.409 Y77.462 E0.01420 ; perimeter
G1 X52.433 Y77.722 E0.01076 ; perimeter
G1 X52.504 Y78.061 E0.01429 ; perimeter
G1 X52.645 Y78.447 E0.01692 ; perimeter
G1 X52.837 Y78.807 E0.01680 ; perimeter
G1 X53.069 Y79.131 E0.01644 ; perimeter
G1 X53.275 Y79.360 E0.01267 ; perimeter
G1 X53.489 Y79.559 E0.01207 ; perimeter
G1 X78.091 Y100.203 E1.32301 ; perimeter
G1 X108.209 Y100.203 E1.24074 ; perimeter
G1 X108.210 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X108.608 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.97058 ; perimeter
G1 X85.047 Y101.936 E0.03301 ; perimeter
G1 X79.147 Y101.936 E0.24305 ; perimeter
G1 X79.147 Y101.134 E0.03301 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X52.873 Y80.259 E1.33790 ; perimeter
G1 X52.461 Y79.868 E0.02339 ; perimeter
G1 X52.106 Y79.441 E0.02288 ; perimeter
G1 X51.813 Y78.982 E0.02244 ; perimeter
G1 X51.585 Y78.502 E0.02190 ; perimeter
G1 X51.453 Y78.109 E0.01707 ; perimeter
G1 X51.342 Y77.524 E0.02451 ; perimeter
G1 X51.326 Y77.120 E0.01665 ; perimeter
G1 X51.386 Y76.594 E0.02181 ; perimeter
G1 X51.532 Y76.121 E0.02042 ; perimeter
G1 X51.659 Y75.849 E0.01236 ; perimeter
G1 X51.814 Y75.609 E0.01176 ; perimeter
G1 X53.093 Y74.067 E0.08252 ; perimeter
G1 X54.207 Y75.002 E0.05990 ; perimeter
G1 X53.200 Y76.201 E0.06449 ; perimeter
G1 X53.000 Y76.502 E0.01487 ; perimeter
G1 X52.865 Y76.856 E0.01561 ; perimeter
G1 X52.810 Y77.156 E0.01257 ; perimeter
G1 X52.806 Y77.447 E0.01198 ; perimeter
G1 X52.826 Y77.663 E0.00896 ; perimeter
G1 X52.886 Y77.952 E0.01217 ; perimeter
G1 X53.007 Y78.285 E0.01459 ; perimeter
G1 X53.174 Y78.597 E0.01457 ; perimeter
G1 X53.379 Y78.883 E0.01447 ; perimeter
G1 X53.558 Y79.082 E0.01104 ; perimeter
G1 X53.752 Y79.262 E0.01091 ; perimeter
G1 X78.235 Y99.806 E1.31665 ; perimeter
G1 X108.605 Y99.806 E1.25109 ; perimeter
G1 X108.608 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X108.208 Y101.128 F10800.000 ; move inwards before travel
G1 F8640
G1 X105.316 Y101.083 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.850 F10800.000 ; lift Z
G1 X59.754 Y73.247 ; move to first perimeter point
G1 Z9.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X57.059 Y70.986 E0.14490 ; perimeter
G1 X54.610 Y73.904 E0.15696 ; perimeter
G1 X54.103 Y73.478 E0.02729 ; perimeter
G1 X63.100 Y62.756 E0.57663 ; perimeter
G1 X63.608 Y63.182 E0.02729 ; perimeter
G1 X61.159 Y66.100 E0.15696 ; perimeter
G1 X63.853 Y68.361 E0.14490 ; perimeter
G1 X63.509 Y68.771 E0.02205 ; perimeter
G1 X60.815 Y66.510 E0.14490 ; perimeter
G1 X57.404 Y70.576 E0.21861 ; perimeter
G1 X60.098 Y72.837 E0.14490 ; perimeter
G1 X59.792 Y73.201 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.803 Y73.805 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X57.108 Y71.544 E0.14490 ; perimeter
G1 X54.659 Y74.463 E0.15696 ; perimeter
G1 X53.544 Y73.527 E0.05995 ; perimeter
G1 X63.051 Y62.197 E0.60929 ; perimeter
G1 X64.166 Y63.133 E0.05995 ; perimeter
G1 X61.717 Y66.052 E0.15696 ; perimeter
G1 X64.412 Y68.312 E0.14490 ; perimeter
G1 X63.558 Y69.330 E0.05471 ; perimeter
G1 X60.863 Y67.069 E0.14490 ; perimeter
G1 X57.962 Y70.527 E0.18596 ; perimeter
G1 X60.656 Y72.788 E0.14490 ; perimeter
G1 X59.841 Y73.759 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.529 Y73.513 F10800.000 ; move inwards before travel
G1 F8640
G1 X57.284 Y71.687 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.850 F10800.000 ; lift Z
G1 X102.562 Y81.038 ; move to first perimeter point
G1 Z9.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.19422 ; perimeter
G1 X97.847 Y80.494 E0.02241 ; perimeter
G1 X102.562 Y80.494 E0.19422 ; perimeter
G1 X102.562 Y80.978 E0.01994 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.958 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.30349 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21163 ; perimeter
G1 X67.611 Y62.283 E0.75931 ; perimeter
G1 X67.160 Y62.021 E0.02149 ; perimeter
G1 X66.682 Y61.841 E0.02105 ; perimeter
G1 X66.192 Y61.746 E0.02054 ; perimeter
G1 X65.708 Y61.740 E0.01994 ; perimeter
G1 X65.251 Y61.822 E0.01911 ; perimeter
G1 X64.896 Y61.953 E0.01562 ; perimeter
G1 X64.649 Y62.102 E0.01187 ; perimeter
G1 X64.093 Y61.635 E0.02992 ; perimeter
G1 X64.395 Y61.417 E0.01535 ; perimeter
G1 X64.695 Y61.273 E0.01371 ; perimeter
G1 X65.145 Y61.139 E0.01935 ; perimeter
G1 X65.493 Y61.092 E0.01446 ; perimeter
G1 X65.846 Y61.089 E0.01455 ; perimeter
G1 X66.393 Y61.156 E0.02269 ; perimeter
G1 X66.845 Y61.281 E0.01934 ; perimeter
G1 X67.418 Y61.531 E0.02575 ; perimeter
G1 X67.922 Y61.845 E0.02446 ; perimeter
G1 X68.171 Y62.037 E0.01294 ; perimeter
G1 X81.934 Y73.586 E0.74014 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y80.097 E0.03301 ; perimeter
G1 X102.958 Y80.097 E0.22688 ; perimeter
G1 X102.958 Y81.374 E0.05259 ; perimeter
M204 S1000 ; adjust acceleration
G1 X103.355 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.32576 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21163 ; perimeter
G1 X67.383 Y62.609 E0.76383 ; perimeter
G1 X66.989 Y62.381 E0.01874 ; perimeter
G1 X66.573 Y62.224 E0.01832 ; perimeter
G1 X66.152 Y62.142 E0.01769 ; perimeter
G1 X65.741 Y62.137 E0.01693 ; perimeter
G1 X65.356 Y62.206 E0.01611 ; perimeter
G1 X65.068 Y62.312 E0.01263 ; perimeter
G1 X64.743 Y62.507 E0.01561 ; perimeter
G1 X64.637 Y62.609 E0.00607 ; perimeter
G1 X63.504 Y61.658 E0.06093 ; perimeter
G1 X63.869 Y61.299 E0.02112 ; perimeter
G1 X64.195 Y61.074 E0.01631 ; perimeter
G1 X64.551 Y60.902 E0.01629 ; perimeter
G1 X65.062 Y60.750 E0.02193 ; perimeter
G1 X65.464 Y60.696 E0.01675 ; perimeter
G1 X65.869 Y60.693 E0.01665 ; perimeter
G1 X66.470 Y60.767 E0.02495 ; perimeter
G1 X66.978 Y60.906 E0.02170 ; perimeter
G1 X67.603 Y61.179 E0.02811 ; perimeter
G1 X68.149 Y61.519 E0.02648 ; perimeter
G1 X68.419 Y61.728 E0.01409 ; perimeter
G1 X82.078 Y73.189 E0.73453 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
M73 P44 R75
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y79.701 E0.03301 ; perimeter
G1 X103.355 Y79.701 E0.25953 ; perimeter
G1 X103.355 Y81.770 E0.08525 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.957 Y81.787 F10800.000 ; move inwards before travel
G1 F8640
G1 X100.063 Y81.795 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.850 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z9.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.850 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z9.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.850 F10800.000 ; lift Z
G1 X147.438 Y81.038 ; move to first perimeter point
G1 Z9.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X147.438 Y80.494 E0.02241 ; perimeter
G1 X152.153 Y80.494 E0.19422 ; perimeter
G1 X152.153 Y81.038 E0.02241 ; perimeter
G1 X147.498 Y81.038 E0.19175 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.042 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X147.042 Y80.097 E0.05507 ; perimeter
G1 X152.549 Y80.097 E0.22688 ; perimeter
G1 X152.549 Y80.899 E0.03301 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X181.828 Y62.038 E0.74007 ; perimeter
G1 X182.358 Y61.657 E0.02687 ; perimeter
G1 X182.692 Y61.473 E0.01576 ; perimeter
G1 X183.049 Y61.319 E0.01598 ; perimeter
G1 X183.612 Y61.155 E0.02419 ; perimeter
G1 X183.975 Y61.100 E0.01511 ; perimeter
G1 X184.514 Y61.093 E0.02219 ; perimeter
G1 X184.860 Y61.140 E0.01441 ; perimeter
G1 X185.197 Y61.233 E0.01440 ; perimeter
G1 X185.606 Y61.419 E0.01851 ; perimeter
G1 X185.908 Y61.635 E0.01526 ; perimeter
G1 X185.351 Y62.102 E0.02993 ; perimeter
G1 X185.097 Y61.949 E0.01222 ; perimeter
G1 X184.643 Y61.795 E0.01973 ; perimeter
G1 X184.166 Y61.736 E0.01980 ; perimeter
G1 X183.797 Y61.748 E0.01523 ; perimeter
G1 X183.241 Y61.865 E0.02338 ; perimeter
G1 X182.835 Y62.024 E0.01798 ; perimeter
G1 X182.348 Y62.311 E0.02330 ; perimeter
G1 X168.261 Y74.121 E0.75725 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X147.102 Y81.434 E0.30102 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.645 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X146.645 Y79.701 E0.08772 ; perimeter
G1 X152.945 Y79.701 E0.25953 ; perimeter
G1 X152.945 Y80.502 E0.03301 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X181.580 Y61.729 E0.73450 ; perimeter
G1 X181.917 Y61.471 E0.01748 ; perimeter
G1 X182.518 Y61.116 E0.02872 ; perimeter
G1 X182.906 Y60.948 E0.01741 ; perimeter
G1 X183.532 Y60.766 E0.02688 ; perimeter
G1 X183.943 Y60.704 E0.01712 ; perimeter
G1 X184.538 Y60.696 E0.02451 ; perimeter
G1 X184.940 Y60.751 E0.01673 ; perimeter
G1 X185.333 Y60.860 E0.01679 ; perimeter
G1 X185.805 Y61.075 E0.02137 ; perimeter
G1 X186.201 Y61.357 E0.02005 ; perimeter
G1 X186.496 Y61.658 E0.01735 ; perimeter
G1 X185.363 Y62.609 E0.06093 ; perimeter
G1 X185.257 Y62.507 E0.00607 ; perimeter
G1 X184.929 Y62.311 E0.01574 ; perimeter
G1 X184.554 Y62.183 E0.01631 ; perimeter
G1 X184.148 Y62.133 E0.01687 ; perimeter
G1 X183.844 Y62.143 E0.01252 ; perimeter
G1 X183.355 Y62.246 E0.02058 ; perimeter
G1 X183.009 Y62.382 E0.01533 ; perimeter
G1 X182.577 Y62.636 E0.02064 ; perimeter
G1 X168.405 Y74.517 E0.76184 ; perimeter
G1 X163.268 Y74.517 E0.21163 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X146.705 Y81.830 E0.32329 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.796 Y81.460 F10800.000 ; move inwards before travel
G1 F8640
G1 X146.645 Y79.701 E-0.49188 ; wipe and retract
G1 X147.807 Y79.701 E-0.26812 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.850 F10800.000 ; lift Z
G1 X190.246 Y73.247 ; move to first perimeter point
G1 Z9.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X189.902 Y72.837 E0.02205 ; perimeter
G1 X192.596 Y70.576 E0.14490 ; perimeter
G1 X189.185 Y66.510 E0.21861 ; perimeter
G1 X186.491 Y68.771 E0.14490 ; perimeter
G1 X186.147 Y68.361 E0.02205 ; perimeter
G1 X188.841 Y66.100 E0.14490 ; perimeter
G1 X186.392 Y63.182 E0.15696 ; perimeter
G1 X186.900 Y62.756 E0.02730 ; perimeter
G1 X195.897 Y73.478 E0.57663 ; perimeter
G1 X195.390 Y73.904 E0.02729 ; perimeter
G1 X192.941 Y70.986 E0.15696 ; perimeter
G1 X190.292 Y73.208 E0.14243 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.197 Y73.805 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X189.344 Y72.788 E0.05471 ; perimeter
G1 X192.038 Y70.527 E0.14490 ; perimeter
G1 X189.137 Y67.069 E0.18596 ; perimeter
G1 X186.442 Y69.330 E0.14490 ; perimeter
G1 X185.588 Y68.312 E0.05471 ; perimeter
G1 X188.283 Y66.052 E0.14490 ; perimeter
G1 X185.834 Y63.133 E0.15696 ; perimeter
G1 X186.949 Y62.197 E0.05995 ; perimeter
G1 X196.456 Y73.527 E0.60929 ; perimeter
G1 X195.341 Y74.463 E0.05995 ; perimeter
G1 X192.892 Y71.544 E0.15696 ; perimeter
M73 Q44 S77
G1 X190.243 Y73.766 E0.14243 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.237 Y73.407 F10800.000 ; move inwards before travel
G1 F8640
G1 X189.344 Y72.788 E-0.30695 ; wipe and retract
G1 X190.847 Y71.526 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.850 F10800.000 ; lift Z
G1 X165.745 Y101.143 ; move to first perimeter point
G1 Z9.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y100.599 E0.02241 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y101.143 E0.02241 ; perimeter
G1 X165.805 Y101.143 E0.17527 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y100.599 E-0.12637 ; wipe and retract
G1 X168.489 Y100.599 E-0.63363 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.850 F10800.000 ; lift Z
G1 X141.790 Y100.738 ; move to first perimeter point
G1 Z9.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X141.791 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E1.24074 ; perimeter
G1 X196.511 Y79.559 E1.32301 ; perimeter
G1 X196.725 Y79.360 E0.01207 ; perimeter
G1 X196.931 Y79.131 E0.01267 ; perimeter
G1 X197.163 Y78.807 E0.01644 ; perimeter
G1 X197.355 Y78.447 E0.01680 ; perimeter
G1 X197.496 Y78.061 E0.01692 ; perimeter
G1 X197.567 Y77.722 E0.01429 ; perimeter
G1 X197.591 Y77.462 E0.01076 ; perimeter
G1 X197.586 Y77.117 E0.01420 ; perimeter
G1 X197.519 Y76.748 E0.01545 ; perimeter
G1 X197.354 Y76.319 E0.01895 ; perimeter
G1 X197.117 Y75.963 E0.01759 ; perimeter
G1 X196.352 Y75.051 E0.04907 ; perimeter
G1 X196.859 Y74.625 E0.02729 ; perimeter
G1 X197.750 Y75.686 E0.05707 ; perimeter
G1 X197.953 Y75.973 E0.01447 ; perimeter
G1 X198.135 Y76.353 E0.01736 ; perimeter
G1 X198.225 Y76.673 E0.01370 ; perimeter
G1 X198.269 Y77.009 E0.01394 ; perimeter
G1 X198.262 Y77.502 E0.02033 ; perimeter
G1 X198.165 Y78.003 E0.02099 ; perimeter
G1 X198.046 Y78.356 E0.01536 ; perimeter
G1 X197.890 Y78.694 E0.01534 ; perimeter
G1 X197.722 Y78.985 E0.01384 ; perimeter
G1 X197.497 Y79.307 E0.01617 ; perimeter
G1 X197.252 Y79.594 E0.01554 ; perimeter
G1 X196.863 Y79.963 E0.02210 ; perimeter
G1 X172.104 Y100.738 E1.33146 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y101.539 E0.03301 ; perimeter
G1 X165.349 Y101.539 E0.21040 ; perimeter
G1 X165.349 Y100.738 E0.03301 ; perimeter
G1 X141.850 Y100.738 E0.96807 ; perimeter
M204 S1000 ; adjust acceleration
G1 X141.392 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X141.395 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E1.25109 ; perimeter
G1 X196.248 Y79.262 E1.31665 ; perimeter
G1 X196.442 Y79.082 E0.01091 ; perimeter
G1 X196.621 Y78.883 E0.01104 ; perimeter
G1 X196.826 Y78.597 E0.01447 ; perimeter
G1 X196.993 Y78.285 E0.01457 ; perimeter
G1 X197.114 Y77.952 E0.01459 ; perimeter
G1 X197.174 Y77.663 E0.01217 ; perimeter
G1 X197.194 Y77.447 E0.00896 ; perimeter
G1 X197.190 Y77.156 E0.01198 ; perimeter
G1 X197.135 Y76.856 E0.01257 ; perimeter
G1 X197.000 Y76.502 E0.01561 ; perimeter
G1 X196.800 Y76.201 E0.01487 ; perimeter
G1 X195.793 Y75.002 E0.06449 ; perimeter
G1 X196.908 Y74.067 E0.05995 ; perimeter
G1 X198.064 Y75.444 E0.07406 ; perimeter
G1 X198.296 Y75.771 E0.01654 ; perimeter
G1 X198.507 Y76.213 E0.02016 ; perimeter
G1 X198.614 Y76.593 E0.01629 ; perimeter
G1 X198.665 Y76.986 E0.01631 ; perimeter
G1 X198.658 Y77.533 E0.02252 ; perimeter
G1 X198.548 Y78.107 E0.02408 ; perimeter
G1 X198.415 Y78.503 E0.01721 ; perimeter
G1 X198.242 Y78.877 E0.01699 ; perimeter
G1 X198.056 Y79.198 E0.01528 ; perimeter
G1 X197.811 Y79.549 E0.01764 ; perimeter
G1 X197.540 Y79.867 E0.01720 ; perimeter
G1 X197.127 Y80.259 E0.02346 ; perimeter
G1 X172.248 Y101.134 E1.33790 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y101.936 E0.03301 ; perimeter
G1 X164.953 Y101.936 E0.24306 ; perimeter
G1 X164.953 Y101.134 E0.03301 ; perimeter
G1 X141.452 Y101.134 E0.96811 ; perimeter
M204 S1000 ; adjust acceleration
G1 X141.597 Y100.790 F10800.000 ; move inwards before travel
G1 F8640
G1 X141.395 Y99.806 E-0.30692 ; wipe and retract
G1 X143.358 Y99.806 E-0.45308 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.850 F10800.000 ; lift Z
G1 X83.970 Y139.289 ; move to first perimeter point
G1 Z9.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.655 Y139.289 E0.17774 ; perimeter
G1 X79.655 Y138.745 E0.02241 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y139.229 E0.01994 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.678 Y139.275 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.850 F10800.000 ; lift Z
G1 X107.925 Y138.884 ; move to first perimeter point
G1 Z9.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.97055 ; perimeter
G1 X84.366 Y139.685 E0.03301 ; perimeter
G1 X79.259 Y139.685 E0.21040 ; perimeter
G1 X79.259 Y138.884 E0.03301 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X52.852 Y118.109 E1.33146 ; perimeter
G1 X52.466 Y117.743 E0.02192 ; perimeter
G1 X52.142 Y117.353 E0.02089 ; perimeter
G1 X51.875 Y116.935 E0.02041 ; perimeter
G1 X51.668 Y116.499 E0.01990 ; perimeter
G1 X51.552 Y116.154 E0.01497 ; perimeter
G1 X51.452 Y115.625 E0.02219 ; perimeter
G1 X51.438 Y115.281 E0.01419 ; perimeter
G1 X51.490 Y114.822 E0.01904 ; perimeter
G1 X51.617 Y114.410 E0.01776 ; perimeter
G1 X51.722 Y114.188 E0.01012 ; perimeter
G1 X51.849 Y113.990 E0.00969 ; perimeter
G1 X52.858 Y112.773 E0.06512 ; perimeter
G1 X53.363 Y113.197 E0.02715 ; perimeter
G1 X52.597 Y114.110 E0.04907 ; perimeter
G1 X52.361 Y114.465 E0.01759 ; perimeter
G1 X52.196 Y114.894 E0.01895 ; perimeter
G1 X52.129 Y115.263 E0.01545 ; perimeter
G1 X52.124 Y115.608 E0.01420 ; perimeter
G1 X52.148 Y115.868 E0.01076 ; perimeter
G1 X52.219 Y116.208 E0.01429 ; perimeter
G1 X52.359 Y116.593 E0.01692 ; perimeter
G1 X52.551 Y116.953 E0.01680 ; perimeter
G1 X52.784 Y117.277 E0.01644 ; perimeter
G1 X52.990 Y117.506 E0.01267 ; perimeter
G1 X53.204 Y117.706 E0.01207 ; perimeter
G1 X77.806 Y138.349 E1.32301 ; perimeter
G1 X107.924 Y138.349 E1.24074 ; perimeter
G1 X107.925 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X108.323 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.97058 ; perimeter
G1 X84.762 Y140.082 E0.03301 ; perimeter
G1 X78.862 Y140.082 E0.24305 ; perimeter
G1 X78.862 Y139.280 E0.03301 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X52.588 Y118.405 E1.33790 ; perimeter
G1 X52.176 Y118.014 E0.02339 ; perimeter
G1 X51.821 Y117.587 E0.02288 ; perimeter
G1 X51.527 Y117.128 E0.02244 ; perimeter
G1 X51.299 Y116.648 E0.02190 ; perimeter
G1 X51.168 Y116.255 E0.01707 ; perimeter
G1 X51.057 Y115.670 E0.02451 ; perimeter
G1 X51.040 Y115.267 E0.01665 ; perimeter
G1 X51.101 Y114.740 E0.02181 ; perimeter
G1 X51.247 Y114.267 E0.02042 ; perimeter
G1 X51.374 Y113.995 E0.01236 ; perimeter
G1 X51.529 Y113.755 E0.01176 ; perimeter
G1 X52.808 Y112.214 E0.08252 ; perimeter
G1 X53.922 Y113.148 E0.05990 ; perimeter
G1 X52.915 Y114.347 E0.06449 ; perimeter
G1 X52.715 Y114.648 E0.01487 ; perimeter
G1 X52.580 Y115.002 E0.01561 ; perimeter
G1 X52.525 Y115.302 E0.01257 ; perimeter
G1 X52.521 Y115.593 E0.01198 ; perimeter
G1 X52.540 Y115.809 E0.00896 ; perimeter
G1 X52.601 Y116.099 E0.01217 ; perimeter
G1 X52.722 Y116.431 E0.01459 ; perimeter
G1 X52.889 Y116.743 E0.01457 ; perimeter
G1 X53.093 Y117.029 E0.01447 ; perimeter
G1 X53.272 Y117.228 E0.01104 ; perimeter
G1 X53.467 Y117.408 E0.01091 ; perimeter
G1 X77.950 Y137.952 E1.31665 ; perimeter
G1 X108.319 Y137.952 E1.25109 ; perimeter
G1 X108.322 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X107.923 Y139.275 F10800.000 ; move inwards before travel
G1 F8640
G1 X105.031 Y139.229 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.850 F10800.000 ; lift Z
G1 X59.469 Y111.393 ; move to first perimeter point
G1 Z9.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X56.774 Y109.132 E0.14490 ; perimeter
G1 X54.325 Y112.050 E0.15696 ; perimeter
G1 X53.818 Y111.625 E0.02729 ; perimeter
G1 X62.815 Y100.902 E0.57663 ; perimeter
G1 X63.323 Y101.328 E0.02729 ; perimeter
G1 X60.873 Y104.247 E0.15696 ; perimeter
G1 X63.568 Y106.507 E0.14490 ; perimeter
G1 X63.224 Y106.918 E0.02205 ; perimeter
G1 X60.529 Y104.657 E0.14490 ; perimeter
G1 X57.118 Y108.722 E0.21861 ; perimeter
G1 X59.813 Y110.983 E0.14490 ; perimeter
G1 X59.507 Y111.347 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.518 Y111.951 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X56.823 Y109.690 E0.14490 ; perimeter
G1 X54.374 Y112.609 E0.15696 ; perimeter
G1 X53.259 Y111.673 E0.05995 ; perimeter
G1 X62.766 Y100.344 E0.60929 ; perimeter
G1 X63.881 Y101.279 E0.05995 ; perimeter
G1 X61.432 Y104.198 E0.15696 ; perimeter
G1 X64.126 Y106.459 E0.14490 ; perimeter
G1 X63.273 Y107.476 E0.05471 ; perimeter
G1 X60.578 Y105.215 E0.14490 ; perimeter
G1 X57.677 Y108.673 E0.18596 ; perimeter
G1 X60.371 Y110.934 E0.14490 ; perimeter
G1 X59.556 Y111.905 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.244 Y111.659 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.999 Y109.833 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.850 F10800.000 ; lift Z
G1 X102.277 Y119.184 ; move to first perimeter point
G1 Z9.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.19422 ; perimeter
G1 X97.562 Y118.640 E0.02241 ; perimeter
G1 X102.277 Y118.640 E0.19422 ; perimeter
G1 X102.277 Y119.124 E0.01994 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.673 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.30349 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.453 Y112.267 E0.21163 ; perimeter
G1 X67.326 Y100.429 E0.75931 ; perimeter
G1 X66.874 Y100.168 E0.02149 ; perimeter
G1 X66.396 Y99.987 E0.02105 ; perimeter
G1 X65.907 Y99.892 E0.02054 ; perimeter
G1 X65.423 Y99.887 E0.01994 ; perimeter
G1 X64.966 Y99.968 E0.01911 ; perimeter
G1 X64.611 Y100.099 E0.01562 ; perimeter
G1 X64.364 Y100.248 E0.01187 ; perimeter
G1 X63.807 Y99.781 E0.02992 ; perimeter
G1 X64.110 Y99.563 E0.01535 ; perimeter
G1 X64.410 Y99.419 E0.01371 ; perimeter
G1 X64.860 Y99.285 E0.01935 ; perimeter
G1 X65.208 Y99.238 E0.01446 ; perimeter
G1 X65.561 Y99.235 E0.01455 ; perimeter
G1 X66.107 Y99.302 E0.02269 ; perimeter
G1 X66.560 Y99.427 E0.01934 ; perimeter
G1 X67.133 Y99.677 E0.02575 ; perimeter
G1 X67.637 Y99.991 E0.02446 ; perimeter
G1 X67.885 Y100.183 E0.01294 ; perimeter
G1 X81.649 Y111.732 E0.74014 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y118.243 E0.03301 ; perimeter
G1 X102.673 Y118.243 E0.22688 ; perimeter
G1 X102.673 Y119.520 E0.05259 ; perimeter
M204 S1000 ; adjust acceleration
G1 X103.069 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.32576 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21163 ; perimeter
G1 X67.098 Y100.755 E0.76383 ; perimeter
G1 X66.704 Y100.527 E0.01874 ; perimeter
G1 X66.288 Y100.370 E0.01832 ; perimeter
G1 X65.866 Y100.288 E0.01769 ; perimeter
G1 X65.456 Y100.283 E0.01693 ; perimeter
G1 X65.071 Y100.352 E0.01611 ; perimeter
G1 X64.783 Y100.458 E0.01263 ; perimeter
G1 X64.458 Y100.653 E0.01561 ; perimeter
G1 X64.352 Y100.755 E0.00607 ; perimeter
G1 X63.219 Y99.804 E0.06093 ; perimeter
G1 X63.584 Y99.445 E0.02112 ; perimeter
G1 X63.910 Y99.220 E0.01631 ; perimeter
G1 X64.266 Y99.048 E0.01629 ; perimeter
G1 X64.776 Y98.897 E0.02193 ; perimeter
G1 X65.179 Y98.842 E0.01675 ; perimeter
G1 X65.583 Y98.839 E0.01665 ; perimeter
G1 X66.185 Y98.913 E0.02495 ; perimeter
G1 X66.692 Y99.052 E0.02170 ; perimeter
G1 X67.318 Y99.325 E0.02811 ; perimeter
G1 X67.863 Y99.665 E0.02648 ; perimeter
G1 X68.134 Y99.874 E0.01409 ; perimeter
G1 X81.793 Y111.335 E0.73453 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y117.847 E0.03301 ; perimeter
G1 X103.069 Y117.847 E0.25953 ; perimeter
G1 X103.069 Y119.916 E0.08525 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.672 Y119.933 F10800.000 ; move inwards before travel
G1 F8640
G1 X99.778 Y119.941 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.850 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z9.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.850 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z9.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.850 F10800.000 ; lift Z
G1 X147.153 Y119.184 ; move to first perimeter point
G1 Z9.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X147.153 Y118.640 E0.02241 ; perimeter
G1 X151.868 Y118.640 E0.19422 ; perimeter
G1 X151.868 Y119.184 E0.02241 ; perimeter
G1 X147.213 Y119.184 E0.19175 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.757 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X146.757 Y118.243 E0.05507 ; perimeter
G1 X152.264 Y118.243 E0.22688 ; perimeter
G1 X152.264 Y119.045 E0.03301 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X181.543 Y100.184 E0.74007 ; perimeter
G1 X182.072 Y99.803 E0.02687 ; perimeter
G1 X182.407 Y99.619 E0.01576 ; perimeter
G1 X182.763 Y99.465 E0.01598 ; perimeter
G1 X183.327 Y99.301 E0.02419 ; perimeter
G1 X183.690 Y99.246 E0.01511 ; perimeter
G1 X184.229 Y99.239 E0.02219 ; perimeter
G1 X184.575 Y99.286 E0.01441 ; perimeter
G1 X184.912 Y99.380 E0.01440 ; perimeter
G1 X185.321 Y99.566 E0.01851 ; perimeter
G1 X185.622 Y99.781 E0.01526 ; perimeter
G1 X185.066 Y100.248 E0.02993 ; perimeter
G1 X184.812 Y100.095 E0.01222 ; perimeter
G1 X184.358 Y99.941 E0.01973 ; perimeter
G1 X183.881 Y99.882 E0.01980 ; perimeter
G1 X183.511 Y99.894 E0.01523 ; perimeter
G1 X182.956 Y100.011 E0.02338 ; perimeter
G1 X182.550 Y100.170 E0.01798 ; perimeter
G1 X182.063 Y100.458 E0.02330 ; perimeter
G1 X167.976 Y112.267 E0.75725 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X146.817 Y119.580 E0.30102 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.360 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X146.360 Y117.847 E0.08772 ; perimeter
G1 X152.660 Y117.847 E0.25953 ; perimeter
G1 X152.660 Y118.648 E0.03301 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X181.295 Y99.875 E0.73450 ; perimeter
G1 X181.632 Y99.617 E0.01748 ; perimeter
G1 X182.232 Y99.262 E0.02872 ; perimeter
G1 X182.620 Y99.095 E0.01741 ; perimeter
G1 X183.247 Y98.912 E0.02688 ; perimeter
G1 X183.658 Y98.850 E0.01712 ; perimeter
G1 X184.253 Y98.842 E0.02451 ; perimeter
G1 X184.655 Y98.897 E0.01673 ; perimeter
G1 X185.048 Y99.006 E0.01679 ; perimeter
G1 X185.520 Y99.221 E0.02137 ; perimeter
G1 X185.916 Y99.504 E0.02005 ; perimeter
G1 X186.211 Y99.804 E0.01735 ; perimeter
G1 X185.078 Y100.755 E0.06093 ; perimeter
G1 X184.971 Y100.653 E0.00607 ; perimeter
G1 X184.644 Y100.457 E0.01574 ; perimeter
G1 X184.269 Y100.330 E0.01631 ; perimeter
G1 X183.863 Y100.279 E0.01687 ; perimeter
G1 X183.559 Y100.289 E0.01252 ; perimeter
G1 X183.070 Y100.392 E0.02058 ; perimeter
G1 X182.724 Y100.528 E0.01533 ; perimeter
G1 X182.292 Y100.782 E0.02064 ; perimeter
G1 X168.120 Y112.663 E0.76184 ; perimeter
G1 X162.983 Y112.663 E0.21163 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X146.420 Y119.976 E0.32329 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.511 Y119.606 F10800.000 ; move inwards before travel
G1 F8640
G1 X146.360 Y117.847 E-0.49188 ; wipe and retract
G1 X147.521 Y117.847 E-0.26812 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.850 F10800.000 ; lift Z
G1 X189.961 Y111.393 ; move to first perimeter point
G1 Z9.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X189.617 Y110.983 E0.02205 ; perimeter
G1 X192.311 Y108.722 E0.14490 ; perimeter
G1 X188.900 Y104.657 E0.21861 ; perimeter
G1 X186.206 Y106.918 E0.14490 ; perimeter
G1 X185.862 Y106.507 E0.02205 ; perimeter
G1 X188.556 Y104.247 E0.14490 ; perimeter
G1 X186.107 Y101.328 E0.15696 ; perimeter
G1 X186.615 Y100.902 E0.02730 ; perimeter
G1 X195.612 Y111.625 E0.57663 ; perimeter
G1 X195.104 Y112.050 E0.02729 ; perimeter
G1 X192.655 Y109.132 E0.15696 ; perimeter
G1 X190.007 Y111.354 E0.14243 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.912 Y111.951 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X189.058 Y110.934 E0.05471 ; perimeter
G1 X191.753 Y108.673 E0.14490 ; perimeter
G1 X188.851 Y105.215 E0.18596 ; perimeter
G1 X186.157 Y107.476 E0.14490 ; perimeter
G1 X185.303 Y106.459 E0.05471 ; perimeter
G1 X187.998 Y104.198 E0.14490 ; perimeter
G1 X185.549 Y101.279 E0.15696 ; perimeter
G1 X186.664 Y100.344 E0.05995 ; perimeter
G1 X196.170 Y111.673 E0.60929 ; perimeter
G1 X195.056 Y112.609 E0.05995 ; perimeter
G1 X192.607 Y109.690 E0.15696 ; perimeter
G1 X189.958 Y111.913 E0.14243 ; perimeter
M204 S1000 ; adjust acceleration
G1 X189.952 Y111.553 F10800.000 ; move inwards before travel
G1 F8640
G1 X189.058 Y110.934 E-0.30695 ; wipe and retract
G1 X190.561 Y109.673 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.850 F10800.000 ; lift Z
G1 X165.460 Y139.289 ; move to first perimeter point
G1 Z9.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y138.745 E0.02241 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y139.289 E0.02241 ; perimeter
G1 X165.520 Y139.289 E0.17527 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y138.745 E-0.12637 ; wipe and retract
G1 X168.204 Y138.745 E-0.63363 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.850 F10800.000 ; lift Z
G1 X141.504 Y138.884 ; move to first perimeter point
G1 Z9.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X141.506 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E1.24074 ; perimeter
G1 X196.226 Y117.706 E1.32301 ; perimeter
G1 X196.440 Y117.506 E0.01207 ; perimeter
G1 X196.646 Y117.277 E0.01267 ; perimeter
G1 X196.878 Y116.953 E0.01644 ; perimeter
G1 X197.070 Y116.593 E0.01680 ; perimeter
G1 X197.211 Y116.208 E0.01692 ; perimeter
G1 X197.282 Y115.868 E0.01429 ; perimeter
G1 X197.306 Y115.608 E0.01076 ; perimeter
G1 X197.300 Y115.263 E0.01420 ; perimeter
G1 X197.233 Y114.894 E0.01545 ; perimeter
G1 X197.069 Y114.465 E0.01895 ; perimeter
G1 X196.832 Y114.110 E0.01759 ; perimeter
G1 X196.066 Y113.197 E0.04907 ; perimeter
G1 X196.574 Y112.771 E0.02729 ; perimeter
G1 X197.465 Y113.832 E0.05707 ; perimeter
G1 X197.668 Y114.119 E0.01447 ; perimeter
G1 X197.850 Y114.499 E0.01736 ; perimeter
G1 X197.940 Y114.819 E0.01370 ; perimeter
G1 X197.984 Y115.155 E0.01394 ; perimeter
G1 X197.976 Y115.648 E0.02033 ; perimeter
G1 X197.880 Y116.149 E0.02099 ; perimeter
G1 X197.761 Y116.502 E0.01536 ; perimeter
G1 X197.605 Y116.841 E0.01534 ; perimeter
G1 X197.436 Y117.131 E0.01384 ; perimeter
G1 X197.212 Y117.453 E0.01617 ; perimeter
G1 X196.967 Y117.740 E0.01554 ; perimeter
G1 X196.578 Y118.109 E0.02210 ; perimeter
G1 X171.819 Y138.884 E1.33146 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y139.685 E0.03301 ; perimeter
G1 X165.064 Y139.685 E0.21040 ; perimeter
G1 X165.064 Y138.884 E0.03301 ; perimeter
G1 X141.564 Y138.884 E0.96807 ; perimeter
M204 S1000 ; adjust acceleration
G1 X141.107 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X141.110 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E1.25109 ; perimeter
G1 X195.963 Y117.408 E1.31665 ; perimeter
M73 P45 R74
G1 X196.157 Y117.228 E0.01091 ; perimeter
G1 X196.336 Y117.029 E0.01104 ; perimeter
G1 X196.541 Y116.743 E0.01447 ; perimeter
G1 X196.707 Y116.431 E0.01457 ; perimeter
G1 X196.829 Y116.099 E0.01459 ; perimeter
G1 X196.889 Y115.809 E0.01217 ; perimeter
G1 X196.909 Y115.593 E0.00896 ; perimeter
G1 X196.905 Y115.302 E0.01198 ; perimeter
G1 X196.850 Y115.002 E0.01257 ; perimeter
G1 X196.714 Y114.648 E0.01561 ; perimeter
G1 X196.514 Y114.347 E0.01487 ; perimeter
G1 X195.508 Y113.148 E0.06449 ; perimeter
G1 X196.623 Y112.213 E0.05995 ; perimeter
G1 X197.779 Y113.590 E0.07406 ; perimeter
G1 X198.011 Y113.917 E0.01654 ; perimeter
G1 X198.222 Y114.359 E0.02016 ; perimeter
G1 X198.329 Y114.739 E0.01629 ; perimeter
G1 X198.380 Y115.132 E0.01631 ; perimeter
G1 X198.372 Y115.679 E0.02252 ; perimeter
G1 X198.263 Y116.253 E0.02408 ; perimeter
G1 X198.130 Y116.649 E0.01721 ; perimeter
G1 X197.957 Y117.023 E0.01699 ; perimeter
G1 X197.771 Y117.344 E0.01528 ; perimeter
G1 X197.526 Y117.696 E0.01764 ; perimeter
G1 X197.255 Y118.013 E0.01720 ; perimeter
G1 X196.842 Y118.405 E0.02346 ; perimeter
G1 X171.963 Y139.280 E1.33790 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.082 E0.03301 ; perimeter
G1 X164.667 Y140.082 E0.24306 ; perimeter
G1 X164.667 Y139.280 E0.03301 ; perimeter
G1 X141.167 Y139.280 E0.96811 ; perimeter
M204 S1000 ; adjust acceleration
G1 X141.312 Y138.937 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;9.5


G1 F8640
G1 X141.110 Y137.952 E-0.30692 ; wipe and retract
G1 X143.072 Y137.952 E-0.45308 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z9.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;9.5
G1 X84.255 Y101.318 ; move to first perimeter point
G1 Z9.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.940 Y101.318 E0.17774 ; perimeter
G1 X79.940 Y100.599 E0.02962 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y101.258 E0.02715 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.964 Y101.304 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.100 F10800.000 ; lift Z
G1 X107.687 Y100.738 ; move to first perimeter point
G1 Z9.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.94900 ; perimeter
G1 X84.651 Y101.714 E0.04023 ; perimeter
G1 X79.544 Y101.714 E0.21040 ; perimeter
G1 X79.544 Y100.738 E0.04023 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X53.003 Y79.850 E1.33868 ; perimeter
G1 X52.617 Y79.485 E0.02189 ; perimeter
G1 X52.294 Y79.095 E0.02086 ; perimeter
G1 X52.027 Y78.679 E0.02038 ; perimeter
G1 X51.820 Y78.243 E0.01986 ; perimeter
G1 X51.702 Y77.891 E0.01531 ; perimeter
G1 X51.603 Y77.371 E0.02181 ; perimeter
G1 X51.589 Y77.020 E0.01449 ; perimeter
G1 X51.641 Y76.560 E0.01904 ; perimeter
G1 X51.732 Y76.239 E0.01375 ; perimeter
G1 X51.911 Y75.864 E0.01712 ; perimeter
G1 X52.116 Y75.574 E0.01466 ; perimeter
G1 X53.007 Y74.512 E0.05706 ; perimeter
G1 X53.514 Y74.938 E0.02729 ; perimeter
G1 X52.749 Y75.851 E0.04906 ; perimeter
G1 X52.514 Y76.203 E0.01746 ; perimeter
G1 X52.349 Y76.629 E0.01882 ; perimeter
G1 X52.280 Y77.011 E0.01596 ; perimeter
G1 X52.276 Y77.389 E0.01557 ; perimeter
G1 X52.364 Y77.934 E0.02277 ; perimeter
G1 X52.512 Y78.338 E0.01772 ; perimeter
G1 X52.708 Y78.703 E0.01707 ; perimeter
G1 X52.945 Y79.030 E0.01662 ; perimeter
G1 X53.130 Y79.236 E0.01141 ; perimeter
G1 X53.354 Y79.446 E0.01267 ; perimeter
G1 X78.091 Y100.203 E1.33026 ; perimeter
G1 X107.688 Y100.203 E1.21926 ; perimeter
G1 X107.687 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X108.084 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.94899 ; perimeter
G1 X85.047 Y102.111 E0.04023 ; perimeter
G1 X79.147 Y102.111 E0.24305 ; perimeter
G1 X79.147 Y101.134 E0.04023 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X52.739 Y80.146 E1.34511 ; perimeter
G1 X52.327 Y79.756 E0.02336 ; perimeter
G1 X51.973 Y79.330 E0.02284 ; perimeter
G1 X51.680 Y78.872 E0.02241 ; perimeter
G1 X51.452 Y78.392 E0.02187 ; perimeter
G1 X51.317 Y77.991 E0.01741 ; perimeter
G1 X51.208 Y77.416 E0.02413 ; perimeter
G1 X51.192 Y77.005 E0.01695 ; perimeter
G1 X51.251 Y76.484 E0.02162 ; perimeter
G1 X51.359 Y76.099 E0.01646 ; perimeter
G1 X51.568 Y75.663 E0.01991 ; perimeter
G1 X51.802 Y75.331 E0.01673 ; perimeter
G1 X52.958 Y73.954 E0.07406 ; perimeter
G1 X54.073 Y74.889 E0.05995 ; perimeter
G1 X53.066 Y76.089 E0.06449 ; perimeter
G1 X52.868 Y76.387 E0.01476 ; perimeter
G1 X52.732 Y76.737 E0.01548 ; perimeter
G1 X52.676 Y77.048 E0.01302 ; perimeter
G1 X52.672 Y77.359 E0.01278 ; perimeter
G1 X52.750 Y77.833 E0.01982 ; perimeter
G1 X52.875 Y78.176 E0.01501 ; perimeter
G1 X53.045 Y78.492 E0.01481 ; perimeter
G1 X53.253 Y78.781 E0.01467 ; perimeter
G1 X53.413 Y78.958 E0.00984 ; perimeter
G1 X53.617 Y79.149 E0.01152 ; perimeter
G1 X78.235 Y99.806 E1.32388 ; perimeter
G1 X108.084 Y99.806 E1.22965 ; perimeter
G1 X108.084 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X107.684 Y101.128 F10800.000 ; move inwards before travel
G1 F8640
G1 X104.792 Y101.083 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.100 F10800.000 ; lift Z
G1 X59.615 Y73.130 ; move to first perimeter point
G1 Z9.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X56.925 Y70.873 E0.14463 ; perimeter
G1 X54.476 Y73.792 E0.15696 ; perimeter
G1 X53.969 Y73.366 E0.02729 ; perimeter
G1 X62.966 Y62.643 E0.57663 ; perimeter
G1 X63.474 Y63.069 E0.02729 ; perimeter
G1 X61.025 Y65.988 E0.15696 ; perimeter
G1 X63.714 Y68.245 E0.14463 ; perimeter
G1 X63.370 Y68.655 E0.02205 ; perimeter
G1 X60.680 Y66.398 E0.14463 ; perimeter
G1 X57.269 Y70.463 E0.21861 ; perimeter
G1 X59.959 Y72.720 E0.14463 ; perimeter
G1 X59.653 Y73.084 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.664 Y73.688 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X56.974 Y71.432 E0.14463 ; perimeter
G1 X54.525 Y74.350 E0.15696 ; perimeter
G1 X53.410 Y73.415 E0.05995 ; perimeter
G1 X62.917 Y62.085 E0.60929 ; perimeter
G1 X64.032 Y63.020 E0.05995 ; perimeter
G1 X61.583 Y65.939 E0.15696 ; perimeter
G1 X64.272 Y68.196 E0.14463 ; perimeter
G1 X63.419 Y69.213 E0.05471 ; perimeter
G1 X60.729 Y66.956 E0.14463 ; perimeter
G1 X57.828 Y70.414 E0.18596 ; perimeter
G1 X60.517 Y72.671 E0.14463 ; perimeter
G1 X59.702 Y73.642 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.390 Y73.396 F10800.000 ; move inwards before travel
G1 F8640
G1 X57.145 Y71.570 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.100 F10800.000 ; lift Z
G1 X102.312 Y81.038 ; move to first perimeter point
G1 Z9.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.18392 ; perimeter
G1 X97.847 Y80.319 E0.02962 ; perimeter
G1 X102.312 Y80.319 E0.18392 ; perimeter
G1 X102.312 Y80.978 E0.02715 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.708 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.29319 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X67.704 Y62.344 E0.75474 ; perimeter
G1 X67.449 Y62.153 E0.01315 ; perimeter
G1 X67.014 Y61.903 E0.02068 ; perimeter
G1 X66.540 Y61.726 E0.02083 ; perimeter
G1 X66.055 Y61.634 E0.02032 ; perimeter
G1 X65.576 Y61.628 E0.01974 ; perimeter
G1 X65.122 Y61.708 E0.01899 ; perimeter
G1 X64.756 Y61.843 E0.01609 ; perimeter
G1 X64.515 Y61.989 E0.01160 ; perimeter
G1 X63.958 Y61.522 E0.02994 ; perimeter
G1 X64.260 Y61.305 E0.01532 ; perimeter
G1 X64.565 Y61.158 E0.01393 ; perimeter
G1 X65.008 Y61.027 E0.01904 ; perimeter
G1 X65.362 Y60.979 E0.01473 ; perimeter
G1 X65.723 Y60.977 E0.01486 ; perimeter
G1 X66.261 Y61.044 E0.02233 ; perimeter
G1 X66.714 Y61.169 E0.01934 ; perimeter
G1 X67.277 Y61.414 E0.02530 ; perimeter
G1 X67.794 Y61.737 E0.02513 ; perimeter
M73 Q45 S76
G1 X68.037 Y61.924 E0.01262 ; perimeter
G1 X81.934 Y73.586 E0.74735 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y79.922 E0.04023 ; perimeter
G1 X102.708 Y79.922 E0.21658 ; perimeter
G1 X102.708 Y81.374 E0.05981 ; perimeter
M204 S1000 ; adjust acceleration
G1 X103.105 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.31546 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X67.458 Y62.655 E0.76024 ; perimeter
G1 X67.231 Y62.484 E0.01170 ; perimeter
G1 X66.845 Y62.263 E0.01833 ; perimeter
G1 X66.433 Y62.109 E0.01812 ; perimeter
G1 X66.015 Y62.029 E0.01749 ; perimeter
G1 X65.609 Y62.024 E0.01676 ; perimeter
G1 X65.226 Y62.092 E0.01599 ; perimeter
G1 X64.929 Y62.202 E0.01307 ; perimeter
G1 X64.607 Y62.396 E0.01548 ; perimeter
G1 X64.503 Y62.496 E0.00595 ; perimeter
G1 X63.370 Y61.546 E0.06092 ; perimeter
G1 X63.731 Y61.190 E0.02087 ; perimeter
G1 X64.060 Y60.962 E0.01652 ; perimeter
G1 X64.422 Y60.788 E0.01653 ; perimeter
G1 X64.925 Y60.639 E0.02162 ; perimeter
G1 X65.335 Y60.583 E0.01704 ; perimeter
G1 X65.747 Y60.581 E0.01697 ; perimeter
G1 X66.339 Y60.655 E0.02459 ; perimeter
G1 X66.846 Y60.795 E0.02168 ; perimeter
G1 X67.462 Y61.063 E0.02766 ; perimeter
G1 X68.021 Y61.411 E0.02715 ; perimeter
G1 X68.285 Y61.616 E0.01376 ; perimeter
G1 X82.078 Y73.189 E0.74174 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y79.526 E0.04023 ; perimeter
G1 X103.105 Y79.526 E0.24923 ; perimeter
G1 X103.105 Y81.770 E0.09246 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.708 Y81.782 F10800.000 ; move inwards before travel
G1 F8640
G1 X99.813 Y81.796 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.100 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z9.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.100 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z9.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.100 F10800.000 ; lift Z
G1 X147.688 Y81.038 ; move to first perimeter point
G1 Z9.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X147.688 Y80.319 E0.02962 ; perimeter
G1 X152.153 Y80.319 E0.18392 ; perimeter
G1 X152.153 Y81.038 E0.02962 ; perimeter
G1 X147.748 Y81.038 E0.18145 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.292 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X147.292 Y79.922 E0.06228 ; perimeter
G1 X152.549 Y79.922 E0.21658 ; perimeter
G1 X152.549 Y80.899 E0.04023 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X181.962 Y61.926 E0.74726 ; perimeter
G1 X182.277 Y61.686 E0.01631 ; perimeter
G1 X182.826 Y61.362 E0.02627 ; perimeter
G1 X183.384 Y61.138 E0.02477 ; perimeter
G1 X183.744 Y61.043 E0.01532 ; perimeter
G1 X184.114 Y60.987 E0.01544 ; perimeter
G1 X184.643 Y60.980 E0.02181 ; perimeter
G1 X184.997 Y61.028 E0.01469 ; perimeter
G1 X185.339 Y61.123 E0.01463 ; perimeter
G1 X185.741 Y61.307 E0.01822 ; perimeter
G1 X186.042 Y61.522 E0.01523 ; perimeter
G1 X185.485 Y61.989 E0.02994 ; perimeter
G1 X185.238 Y61.840 E0.01190 ; perimeter
G1 X184.790 Y61.685 E0.01952 ; perimeter
G1 X184.318 Y61.624 E0.01961 ; perimeter
G1 X183.935 Y61.635 E0.01579 ; perimeter
G1 X183.393 Y61.747 E0.02278 ; perimeter
G1 X182.981 Y61.906 E0.01822 ; perimeter
G1 X182.478 Y62.201 E0.02400 ; perimeter
G1 X168.261 Y74.121 E0.76429 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X147.352 Y81.434 E0.29072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.895 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X146.895 Y79.526 E0.09493 ; perimeter
G1 X152.945 Y79.526 E0.24923 ; perimeter
G1 X152.945 Y80.502 E0.04023 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X181.714 Y61.616 E0.74170 ; perimeter
G1 X182.055 Y61.356 E0.01766 ; perimeter
G1 X182.650 Y61.005 E0.02848 ; perimeter
G1 X183.259 Y60.761 E0.02701 ; perimeter
G1 X183.663 Y60.654 E0.01721 ; perimeter
G1 X184.082 Y60.591 E0.01746 ; perimeter
G1 X184.668 Y60.583 E0.02413 ; perimeter
G1 X185.077 Y60.639 E0.01702 ; perimeter
G1 X185.475 Y60.750 E0.01704 ; perimeter
G1 X185.940 Y60.962 E0.02106 ; perimeter
G1 X186.332 Y61.242 E0.01982 ; perimeter
G1 X186.630 Y61.546 E0.01755 ; perimeter
G1 X185.497 Y62.496 E0.06092 ; perimeter
G1 X185.393 Y62.396 E0.00595 ; perimeter
G1 X185.069 Y62.201 E0.01559 ; perimeter
G1 X184.699 Y62.073 E0.01612 ; perimeter
G1 X184.298 Y62.021 E0.01667 ; perimeter
G1 X183.981 Y62.030 E0.01305 ; perimeter
G1 X183.506 Y62.129 E0.02000 ; perimeter
G1 X183.153 Y62.264 E0.01555 ; perimeter
G1 X182.708 Y62.526 E0.02130 ; perimeter
G1 X168.405 Y74.517 E0.76887 ; perimeter
G1 X163.268 Y74.517 E0.21163 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X146.955 Y81.830 E0.31299 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.045 Y81.459 F10800.000 ; move inwards before travel
G1 F8640
G1 X146.895 Y79.526 E-0.53228 ; wipe and retract
G1 X147.882 Y79.526 E-0.22772 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.100 F10800.000 ; lift Z
G1 X190.385 Y73.130 ; move to first perimeter point
G1 Z9.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X190.041 Y72.720 E0.02205 ; perimeter
G1 X192.731 Y70.463 E0.14463 ; perimeter
G1 X189.320 Y66.398 E0.21861 ; perimeter
G1 X186.630 Y68.655 E0.14463 ; perimeter
G1 X186.286 Y68.245 E0.02205 ; perimeter
G1 X188.975 Y65.988 E0.14463 ; perimeter
G1 X186.526 Y63.069 E0.15696 ; perimeter
G1 X187.034 Y62.643 E0.02729 ; perimeter
G1 X196.031 Y73.366 E0.57663 ; perimeter
G1 X195.524 Y73.792 E0.02729 ; perimeter
G1 X193.075 Y70.873 E0.15696 ; perimeter
G1 X190.431 Y73.091 E0.14216 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.336 Y73.688 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X189.483 Y72.671 E0.05471 ; perimeter
G1 X192.172 Y70.414 E0.14463 ; perimeter
G1 X189.271 Y66.956 E0.18596 ; perimeter
G1 X186.581 Y69.213 E0.14463 ; perimeter
G1 X185.728 Y68.196 E0.05471 ; perimeter
G1 X188.417 Y65.939 E0.14463 ; perimeter
G1 X185.968 Y63.020 E0.15696 ; perimeter
G1 X187.083 Y62.085 E0.05995 ; perimeter
G1 X196.590 Y73.415 E0.60929 ; perimeter
G1 X195.475 Y74.350 E0.05995 ; perimeter
G1 X193.026 Y71.432 E0.15696 ; perimeter
G1 X190.382 Y73.650 E0.14216 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.377 Y73.290 F10800.000 ; move inwards before travel
G1 F8640
G1 X189.483 Y72.671 E-0.30695 ; wipe and retract
G1 X190.986 Y71.410 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.100 F10800.000 ; lift Z
G1 X165.745 Y101.318 ; move to first perimeter point
G1 Z9.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y100.599 E0.02962 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y101.318 E0.02962 ; perimeter
G1 X165.805 Y101.318 E0.17527 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y100.599 E-0.16661 ; wipe and retract
G1 X168.315 Y100.599 E-0.59339 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.100 F10800.000 ; lift Z
G1 X142.313 Y100.738 ; move to first perimeter point
G1 Z9.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X142.312 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E1.21926 ; perimeter
G1 X196.646 Y79.446 E1.33026 ; perimeter
G1 X196.870 Y79.236 E0.01267 ; perimeter
G1 X197.055 Y79.030 E0.01141 ; perimeter
G1 X197.292 Y78.703 E0.01662 ; perimeter
G1 X197.488 Y78.338 E0.01707 ; perimeter
G1 X197.636 Y77.934 E0.01772 ; perimeter
G1 X197.724 Y77.389 E0.02277 ; perimeter
G1 X197.720 Y77.011 E0.01557 ; perimeter
G1 X197.651 Y76.629 E0.01596 ; perimeter
G1 X197.486 Y76.203 E0.01882 ; perimeter
G1 X197.251 Y75.851 E0.01745 ; perimeter
G1 X196.486 Y74.938 E0.04906 ; perimeter
G1 X196.993 Y74.512 E0.02729 ; perimeter
G1 X197.884 Y75.574 E0.05706 ; perimeter
G1 X198.089 Y75.864 E0.01466 ; perimeter
G1 X198.268 Y76.239 E0.01712 ; perimeter
G1 X198.360 Y76.564 E0.01392 ; perimeter
G1 X198.404 Y76.906 E0.01420 ; perimeter
G1 X198.395 Y77.393 E0.02007 ; perimeter
G1 X198.300 Y77.886 E0.02067 ; perimeter
G1 X198.179 Y78.246 E0.01566 ; perimeter
G1 X198.019 Y78.592 E0.01571 ; perimeter
G1 X197.865 Y78.858 E0.01266 ; perimeter
G1 X197.635 Y79.189 E0.01657 ; perimeter
G1 X197.386 Y79.482 E0.01588 ; perimeter
G1 X196.997 Y79.850 E0.02205 ; perimeter
G1 X172.104 Y100.738 E1.33868 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y101.714 E0.04023 ; perimeter
G1 X165.349 Y101.714 E0.21040 ; perimeter
G1 X165.349 Y100.738 E0.04023 ; perimeter
G1 X142.373 Y100.738 E0.94653 ; perimeter
M204 S1000 ; adjust acceleration
G1 X141.916 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X141.916 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E1.22965 ; perimeter
G1 X196.383 Y79.149 E1.32388 ; perimeter
G1 X196.587 Y78.958 E0.01152 ; perimeter
G1 X196.747 Y78.781 E0.00984 ; perimeter
G1 X196.955 Y78.492 E0.01467 ; perimeter
G1 X197.125 Y78.176 E0.01481 ; perimeter
G1 X197.250 Y77.833 E0.01501 ; perimeter
G1 X197.328 Y77.359 E0.01982 ; perimeter
G1 X197.324 Y77.048 E0.01278 ; perimeter
G1 X197.268 Y76.737 E0.01302 ; perimeter
G1 X197.132 Y76.387 E0.01548 ; perimeter
G1 X196.934 Y76.089 E0.01476 ; perimeter
G1 X195.927 Y74.889 E0.06449 ; perimeter
G1 X197.042 Y73.954 E0.05995 ; perimeter
G1 X198.198 Y75.331 E0.07406 ; perimeter
G1 X198.432 Y75.663 E0.01673 ; perimeter
G1 X198.641 Y76.099 E0.01991 ; perimeter
G1 X198.749 Y76.485 E0.01653 ; perimeter
G1 X198.800 Y76.884 E0.01658 ; perimeter
G1 X198.791 Y77.424 E0.02224 ; perimeter
G1 X198.683 Y77.990 E0.02371 ; perimeter
G1 X198.548 Y78.393 E0.01754 ; perimeter
G1 X198.371 Y78.775 E0.01735 ; perimeter
G1 X198.200 Y79.071 E0.01406 ; perimeter
G1 X197.950 Y79.431 E0.01804 ; perimeter
G1 X197.674 Y79.755 E0.01757 ; perimeter
G1 X197.261 Y80.146 E0.02342 ; perimeter
G1 X172.248 Y101.134 E1.34511 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.111 E0.04023 ; perimeter
G1 X164.953 Y102.111 E0.24306 ; perimeter
G1 X164.953 Y101.134 E0.04023 ; perimeter
G1 X141.976 Y101.134 E0.94652 ; perimeter
M204 S1000 ; adjust acceleration
G1 X142.121 Y100.791 F10800.000 ; move inwards before travel
G1 F8640
G1 X141.916 Y99.806 E-0.30696 ; wipe and retract
G1 X143.878 Y99.806 E-0.45304 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.100 F10800.000 ; lift Z
G1 X83.970 Y139.464 ; move to first perimeter point
G1 Z9.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.655 Y139.464 E0.17774 ; perimeter
G1 X79.655 Y138.745 E0.02962 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y139.404 E0.02715 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.678 Y139.450 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.100 F10800.000 ; lift Z
G1 X107.402 Y138.884 ; move to first perimeter point
G1 Z9.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.94900 ; perimeter
G1 X84.366 Y139.861 E0.04023 ; perimeter
G1 X79.259 Y139.861 E0.21040 ; perimeter
G1 X79.259 Y138.884 E0.04023 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X52.718 Y117.996 E1.33868 ; perimeter
G1 X52.332 Y117.631 E0.02189 ; perimeter
G1 X52.009 Y117.241 E0.02086 ; perimeter
G1 X51.742 Y116.825 E0.02038 ; perimeter
G1 X51.535 Y116.390 E0.01986 ; perimeter
G1 X51.416 Y116.037 E0.01531 ; perimeter
G1 X51.318 Y115.517 E0.02181 ; perimeter
G1 X51.304 Y115.166 E0.01449 ; perimeter
G1 X51.356 Y114.706 E0.01904 ; perimeter
G1 X51.447 Y114.385 E0.01375 ; perimeter
G1 X51.625 Y114.010 E0.01712 ; perimeter
G1 X51.831 Y113.720 E0.01466 ; perimeter
G1 X52.722 Y112.659 E0.05706 ; perimeter
G1 X53.229 Y113.084 E0.02729 ; perimeter
G1 X52.464 Y113.997 E0.04906 ; perimeter
G1 X52.229 Y114.349 E0.01746 ; perimeter
G1 X52.064 Y114.776 E0.01882 ; perimeter
G1 X51.994 Y115.157 E0.01596 ; perimeter
G1 X51.990 Y115.535 E0.01557 ; perimeter
G1 X52.079 Y116.080 E0.02277 ; perimeter
G1 X52.227 Y116.484 E0.01772 ; perimeter
G1 X52.423 Y116.849 E0.01707 ; perimeter
G1 X52.660 Y117.176 E0.01662 ; perimeter
G1 X52.845 Y117.382 E0.01141 ; perimeter
G1 X53.069 Y117.592 E0.01267 ; perimeter
G1 X77.806 Y138.349 E1.33026 ; perimeter
G1 X107.402 Y138.349 E1.21926 ; perimeter
G1 X107.402 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X107.799 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.94899 ; perimeter
G1 X84.762 Y140.257 E0.04023 ; perimeter
G1 X78.862 Y140.257 E0.24305 ; perimeter
G1 X78.862 Y139.280 E0.04023 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X52.454 Y118.292 E1.34511 ; perimeter
G1 X52.042 Y117.903 E0.02336 ; perimeter
G1 X51.688 Y117.476 E0.02284 ; perimeter
G1 X51.395 Y117.018 E0.02241 ; perimeter
G1 X51.167 Y116.538 E0.02187 ; perimeter
G1 X51.032 Y116.138 E0.01741 ; perimeter
G1 X50.923 Y115.562 E0.02413 ; perimeter
G1 X50.906 Y115.151 E0.01695 ; perimeter
G1 X50.966 Y114.630 E0.02162 ; perimeter
G1 X51.074 Y114.245 E0.01646 ; perimeter
G1 X51.282 Y113.809 E0.01991 ; perimeter
G1 X51.517 Y113.477 E0.01673 ; perimeter
G1 X52.673 Y112.100 E0.07406 ; perimeter
G1 X53.787 Y113.036 E0.05995 ; perimeter
G1 X52.781 Y114.235 E0.06449 ; perimeter
G1 X52.583 Y114.533 E0.01476 ; perimeter
G1 X52.447 Y114.884 E0.01548 ; perimeter
G1 X52.390 Y115.195 E0.01302 ; perimeter
G1 X52.387 Y115.505 E0.01278 ; perimeter
G1 X52.464 Y115.980 E0.01982 ; perimeter
G1 X52.589 Y116.322 E0.01501 ; perimeter
G1 X52.760 Y116.638 E0.01481 ; perimeter
G1 X52.968 Y116.927 E0.01467 ; perimeter
G1 X53.128 Y117.104 E0.00984 ; perimeter
G1 X53.332 Y117.296 E0.01152 ; perimeter
G1 X77.950 Y137.952 E1.32388 ; perimeter
G1 X107.799 Y137.952 E1.22965 ; perimeter
G1 X107.799 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X107.399 Y139.274 F10800.000 ; move inwards before travel
G1 F8640
G1 X104.507 Y139.229 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.100 F10800.000 ; lift Z
G1 X59.330 Y111.276 ; move to first perimeter point
G1 Z9.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X56.640 Y109.019 E0.14463 ; perimeter
G1 X54.191 Y111.938 E0.15696 ; perimeter
G1 X53.684 Y111.512 E0.02729 ; perimeter
G1 X62.681 Y100.789 E0.57663 ; perimeter
G1 X63.188 Y101.215 E0.02729 ; perimeter
G1 X60.739 Y104.134 E0.15696 ; perimeter
G1 X63.429 Y106.391 E0.14463 ; perimeter
G1 X63.085 Y106.801 E0.02205 ; perimeter
G1 X60.395 Y104.544 E0.14463 ; perimeter
G1 X56.984 Y108.609 E0.21861 ; perimeter
G1 X59.674 Y110.866 E0.14463 ; perimeter
G1 X59.368 Y111.230 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.378 Y111.834 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X56.689 Y109.578 E0.14463 ; perimeter
G1 X54.240 Y112.496 E0.15696 ; perimeter
G1 X53.125 Y111.561 E0.05995 ; perimeter
G1 X62.632 Y100.231 E0.60929 ; perimeter
G1 X63.747 Y101.167 E0.05995 ; perimeter
G1 X61.298 Y104.085 E0.15696 ; perimeter
G1 X63.987 Y106.342 E0.14463 ; perimeter
G1 X63.134 Y107.359 E0.05471 ; perimeter
G1 X60.444 Y105.102 E0.14463 ; perimeter
G1 X57.543 Y108.560 E0.18596 ; perimeter
G1 X60.232 Y110.817 E0.14463 ; perimeter
G1 X59.417 Y111.788 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.105 Y111.542 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.860 Y109.716 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.100 F10800.000 ; lift Z
G1 X102.027 Y119.184 ; move to first perimeter point
G1 Z9.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.18392 ; perimeter
G1 X97.562 Y118.465 E0.02962 ; perimeter
G1 X102.027 Y118.465 E0.18392 ; perimeter
G1 X102.027 Y119.124 E0.02715 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.423 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.29319 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X67.419 Y100.491 E0.75474 ; perimeter
G1 X67.164 Y100.299 E0.01315 ; perimeter
G1 X66.728 Y100.050 E0.02068 ; perimeter
G1 X66.255 Y99.872 E0.02083 ; perimeter
G1 X65.770 Y99.780 E0.02032 ; perimeter
G1 X65.291 Y99.774 E0.01974 ; perimeter
G1 X64.837 Y99.854 E0.01899 ; perimeter
G1 X64.471 Y99.990 E0.01609 ; perimeter
G1 X64.230 Y100.135 E0.01160 ; perimeter
G1 X63.673 Y99.668 E0.02994 ; perimeter
G1 X63.975 Y99.451 E0.01532 ; perimeter
G1 X64.280 Y99.305 E0.01393 ; perimeter
G1 X64.723 Y99.173 E0.01904 ; perimeter
G1 X65.077 Y99.125 E0.01473 ; perimeter
G1 X65.438 Y99.123 E0.01486 ; perimeter
G1 X65.976 Y99.190 E0.02233 ; perimeter
G1 X66.428 Y99.315 E0.01934 ; perimeter
G1 X66.992 Y99.560 E0.02530 ; perimeter
G1 X67.509 Y99.883 E0.02513 ; perimeter
G1 X67.751 Y100.071 E0.01262 ; perimeter
G1 X81.649 Y111.732 E0.74735 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y118.068 E0.04023 ; perimeter
G1 X102.423 Y118.068 E0.21658 ; perimeter
G1 X102.423 Y119.520 E0.05981 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.819 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.31546 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X67.173 Y100.801 E0.76024 ; perimeter
G1 X66.946 Y100.631 E0.01170 ; perimeter
G1 X66.559 Y100.409 E0.01833 ; perimeter
G1 X66.147 Y100.255 E0.01812 ; perimeter
G1 X65.730 Y100.176 E0.01749 ; perimeter
G1 X65.323 Y100.171 E0.01676 ; perimeter
G1 X64.941 Y100.238 E0.01599 ; perimeter
G1 X64.644 Y100.348 E0.01307 ; perimeter
G1 X64.322 Y100.543 E0.01548 ; perimeter
G1 X64.217 Y100.642 E0.00595 ; perimeter
G1 X63.085 Y99.692 E0.06092 ; perimeter
G1 X63.445 Y99.336 E0.02087 ; perimeter
G1 X63.775 Y99.108 E0.01652 ; perimeter
G1 X64.136 Y98.934 E0.01653 ; perimeter
G1 X64.640 Y98.785 E0.02162 ; perimeter
G1 X65.049 Y98.729 E0.01704 ; perimeter
G1 X65.461 Y98.727 E0.01697 ; perimeter
G1 X66.054 Y98.801 E0.02459 ; perimeter
G1 X66.561 Y98.941 E0.02168 ; perimeter
G1 X67.177 Y99.209 E0.02766 ; perimeter
G1 X67.736 Y99.558 E0.02715 ; perimeter
G1 X68.000 Y99.762 E0.01376 ; perimeter
G1 X81.793 Y111.335 E0.74174 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y117.672 E0.04023 ; perimeter
G1 X102.819 Y117.672 E0.24923 ; perimeter
G1 X102.819 Y119.916 E0.09246 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.422 Y119.928 F10800.000 ; move inwards before travel
G1 F8640
G1 X99.528 Y119.942 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.100 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z9.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
M73 P45 R73
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.100 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z9.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.100 F10800.000 ; lift Z
G1 X147.403 Y119.184 ; move to first perimeter point
G1 Z9.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X147.403 Y118.465 E0.02962 ; perimeter
G1 X151.868 Y118.465 E0.18392 ; perimeter
G1 X151.868 Y119.184 E0.02962 ; perimeter
G1 X147.463 Y119.184 E0.18145 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.007 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X147.007 Y118.068 E0.06228 ; perimeter
G1 X152.264 Y118.068 E0.21658 ; perimeter
G1 X152.264 Y119.045 E0.04023 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X181.677 Y100.072 E0.74726 ; perimeter
G1 X181.992 Y99.832 E0.01631 ; perimeter
G1 X182.541 Y99.508 E0.02627 ; perimeter
G1 X183.099 Y99.284 E0.02477 ; perimeter
G1 X183.458 Y99.189 E0.01532 ; perimeter
G1 X183.829 Y99.133 E0.01544 ; perimeter
G1 X184.358 Y99.126 E0.02181 ; perimeter
G1 X184.712 Y99.174 E0.01469 ; perimeter
G1 X185.054 Y99.270 E0.01463 ; perimeter
G1 X185.456 Y99.453 E0.01822 ; perimeter
G1 X185.757 Y99.668 E0.01523 ; perimeter
G1 X185.200 Y100.135 E0.02994 ; perimeter
G1 X184.953 Y99.986 E0.01190 ; perimeter
G1 X184.505 Y99.832 E0.01952 ; perimeter
G1 X184.033 Y99.770 E0.01961 ; perimeter
G1 X183.650 Y99.781 E0.01579 ; perimeter
G1 X183.108 Y99.894 E0.02278 ; perimeter
G1 X182.695 Y100.052 E0.01822 ; perimeter
G1 X182.193 Y100.348 E0.02400 ; perimeter
G1 X167.976 Y112.267 E0.76429 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X147.067 Y119.580 E0.29072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.610 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X146.610 Y117.672 E0.09493 ; perimeter
G1 X152.660 Y117.672 E0.24923 ; perimeter
G1 X152.660 Y118.648 E0.04023 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X181.429 Y99.762 E0.74170 ; perimeter
G1 X181.770 Y99.503 E0.01766 ; perimeter
G1 X182.365 Y99.151 E0.02848 ; perimeter
G1 X182.974 Y98.907 E0.02701 ; perimeter
G1 X183.378 Y98.800 E0.01721 ; perimeter
G1 X183.797 Y98.737 E0.01746 ; perimeter
G1 X184.382 Y98.730 E0.02413 ; perimeter
G1 X184.792 Y98.785 E0.01702 ; perimeter
G1 X185.190 Y98.896 E0.01704 ; perimeter
G1 X185.655 Y99.109 E0.02106 ; perimeter
G1 X186.047 Y99.388 E0.01982 ; perimeter
G1 X186.345 Y99.692 E0.01755 ; perimeter
G1 X185.212 Y100.642 E0.06092 ; perimeter
G1 X185.108 Y100.543 E0.00595 ; perimeter
G1 X184.784 Y100.347 E0.01559 ; perimeter
G1 X184.414 Y100.219 E0.01612 ; perimeter
G1 X184.013 Y100.167 E0.01667 ; perimeter
G1 X183.696 Y100.176 E0.01305 ; perimeter
G1 X183.221 Y100.275 E0.02000 ; perimeter
G1 X182.868 Y100.410 E0.01555 ; perimeter
G1 X182.423 Y100.673 E0.02130 ; perimeter
G1 X168.120 Y112.663 E0.76887 ; perimeter
G1 X162.983 Y112.663 E0.21163 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X146.670 Y119.976 E0.31299 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.760 Y119.605 F10800.000 ; move inwards before travel
G1 F8640
G1 X146.610 Y117.672 E-0.53228 ; wipe and retract
G1 X147.596 Y117.672 E-0.22772 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.100 F10800.000 ; lift Z
G1 X190.100 Y111.276 ; move to first perimeter point
G1 Z9.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X189.756 Y110.866 E0.02205 ; perimeter
G1 X192.445 Y108.609 E0.14463 ; perimeter
G1 X189.034 Y104.544 E0.21861 ; perimeter
G1 X186.345 Y106.801 E0.14463 ; perimeter
G1 X186.001 Y106.391 E0.02205 ; perimeter
G1 X188.690 Y104.134 E0.14463 ; perimeter
G1 X186.241 Y101.215 E0.15696 ; perimeter
G1 X186.749 Y100.789 E0.02729 ; perimeter
G1 X195.746 Y111.512 E0.57663 ; perimeter
G1 X195.239 Y111.938 E0.02729 ; perimeter
G1 X192.789 Y109.019 E0.15696 ; perimeter
G1 X190.146 Y111.237 E0.14216 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.051 Y111.834 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X189.198 Y110.817 E0.05471 ; perimeter
G1 X191.887 Y108.560 E0.14463 ; perimeter
G1 X188.985 Y105.102 E0.18596 ; perimeter
G1 X186.296 Y107.359 E0.14463 ; perimeter
G1 X185.442 Y106.342 E0.05471 ; perimeter
G1 X188.132 Y104.085 E0.14463 ; perimeter
G1 X185.683 Y101.167 E0.15696 ; perimeter
G1 X186.798 Y100.231 E0.05995 ; perimeter
G1 X196.304 Y111.561 E0.60929 ; perimeter
G1 X195.190 Y112.496 E0.05995 ; perimeter
G1 X192.741 Y109.578 E0.15696 ; perimeter
G1 X190.097 Y111.796 E0.14216 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.092 Y111.436 F10800.000 ; move inwards before travel
G1 F8640
G1 X189.198 Y110.817 E-0.30695 ; wipe and retract
G1 X190.701 Y109.556 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.100 F10800.000 ; lift Z
G1 X165.460 Y139.464 ; move to first perimeter point
G1 Z9.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q45 S75
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y138.745 E0.02962 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y139.464 E0.02962 ; perimeter
G1 X165.520 Y139.464 E0.17527 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y138.745 E-0.16661 ; wipe and retract
G1 X168.030 Y138.745 E-0.59339 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.100 F10800.000 ; lift Z
G1 X142.027 Y138.884 ; move to first perimeter point
G1 Z9.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X142.027 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E1.21926 ; perimeter
G1 X196.360 Y117.592 E1.33026 ; perimeter
G1 X196.585 Y117.382 E0.01267 ; perimeter
G1 X196.770 Y117.176 E0.01141 ; perimeter
G1 X197.007 Y116.849 E0.01662 ; perimeter
G1 X197.203 Y116.484 E0.01707 ; perimeter
G1 X197.350 Y116.080 E0.01772 ; perimeter
G1 X197.439 Y115.535 E0.02277 ; perimeter
G1 X197.435 Y115.157 E0.01557 ; perimeter
G1 X197.366 Y114.776 E0.01596 ; perimeter
G1 X197.201 Y114.349 E0.01882 ; perimeter
G1 X196.966 Y113.997 E0.01745 ; perimeter
G1 X196.201 Y113.084 E0.04906 ; perimeter
G1 X196.708 Y112.659 E0.02729 ; perimeter
G1 X197.598 Y113.720 E0.05706 ; perimeter
G1 X197.804 Y114.010 E0.01466 ; perimeter
G1 X197.983 Y114.385 E0.01712 ; perimeter
G1 X198.075 Y114.711 E0.01392 ; perimeter
G1 X198.118 Y115.052 E0.01420 ; perimeter
G1 X198.110 Y115.540 E0.02007 ; perimeter
G1 X198.015 Y116.032 E0.02067 ; perimeter
G1 X197.894 Y116.392 E0.01566 ; perimeter
G1 X197.733 Y116.738 E0.01571 ; perimeter
G1 X197.579 Y117.004 E0.01266 ; perimeter
G1 X197.350 Y117.335 E0.01657 ; perimeter
G1 X197.100 Y117.628 E0.01588 ; perimeter
G1 X196.712 Y117.996 E0.02205 ; perimeter
G1 X171.819 Y138.884 E1.33868 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y139.861 E0.04023 ; perimeter
G1 X165.064 Y139.861 E0.21040 ; perimeter
G1 X165.064 Y138.884 E0.04023 ; perimeter
G1 X142.087 Y138.884 E0.94653 ; perimeter
M204 S1000 ; adjust acceleration
G1 X141.631 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X141.631 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E1.22965 ; perimeter
G1 X196.098 Y117.296 E1.32388 ; perimeter
G1 X196.302 Y117.104 E0.01152 ; perimeter
G1 X196.461 Y116.927 E0.00984 ; perimeter
G1 X196.670 Y116.638 E0.01467 ; perimeter
G1 X196.840 Y116.322 E0.01481 ; perimeter
G1 X196.965 Y115.980 E0.01501 ; perimeter
G1 X197.043 Y115.505 E0.01982 ; perimeter
G1 X197.039 Y115.195 E0.01278 ; perimeter
G1 X196.983 Y114.884 E0.01302 ; perimeter
G1 X196.847 Y114.533 E0.01548 ; perimeter
G1 X196.648 Y114.235 E0.01476 ; perimeter
G1 X195.642 Y113.036 E0.06449 ; perimeter
G1 X196.757 Y112.100 E0.05995 ; perimeter
G1 X197.913 Y113.477 E0.07406 ; perimeter
G1 X198.147 Y113.809 E0.01673 ; perimeter
G1 X198.355 Y114.245 E0.01991 ; perimeter
G1 X198.464 Y114.631 E0.01653 ; perimeter
G1 X198.515 Y115.031 E0.01658 ; perimeter
G1 X198.506 Y115.570 E0.02224 ; perimeter
G1 X198.398 Y116.136 E0.02371 ; perimeter
G1 X198.263 Y116.539 E0.01754 ; perimeter
G1 X198.085 Y116.921 E0.01735 ; perimeter
G1 X197.914 Y117.217 E0.01406 ; perimeter
G1 X197.665 Y117.577 E0.01804 ; perimeter
G1 X197.388 Y117.902 E0.01757 ; perimeter
G1 X196.976 Y118.292 E0.02342 ; perimeter
G1 X171.963 Y139.280 E1.34511 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.257 E0.04023 ; perimeter
G1 X164.667 Y140.257 E0.24306 ; perimeter
G1 X164.667 Y139.280 E0.04023 ; perimeter
G1 X141.691 Y139.280 E0.94652 ; perimeter
M204 S1000 ; adjust acceleration
G1 X141.836 Y138.937 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;9.75


G1 F8640
G1 X141.631 Y137.952 E-0.30696 ; wipe and retract
G1 X143.593 Y137.952 E-0.45304 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;9.75
G1 X84.254 Y101.493 ; move to first perimeter point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.941 Y101.493 E0.17766 ; perimeter
G1 X79.935 Y100.599 E0.03683 ; perimeter
G1 X84.260 Y100.599 E0.17820 ; perimeter
G1 X84.254 Y101.433 E0.03436 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.963 Y101.479 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X107.171 Y100.738 ; move to first perimeter point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.656 Y100.738 E0.92753 ; perimeter
G1 X84.647 Y101.889 E0.04744 ; perimeter
G1 X79.548 Y101.889 E0.21008 ; perimeter
G1 X79.539 Y100.738 E0.04744 ; perimeter
G1 X77.896 Y100.738 E0.06769 ; perimeter
G1 X52.869 Y79.738 E1.34589 ; perimeter
G1 X52.484 Y79.373 E0.02185 ; perimeter
G1 X52.161 Y78.984 E0.02083 ; perimeter
G1 X51.894 Y78.568 E0.02035 ; perimeter
G1 X51.687 Y78.134 E0.01982 ; perimeter
G1 X51.566 Y77.774 E0.01565 ; perimeter
G1 X51.469 Y77.263 E0.02142 ; perimeter
G1 X51.455 Y76.904 E0.01479 ; perimeter
G1 X51.506 Y76.452 E0.01873 ; perimeter
G1 X51.598 Y76.125 E0.01400 ; perimeter
G1 X51.774 Y75.755 E0.01688 ; perimeter
G1 X51.982 Y75.461 E0.01485 ; perimeter
G1 X52.873 Y74.400 E0.05705 ; perimeter
G1 X53.380 Y74.826 E0.02729 ; perimeter
G1 X52.615 Y75.738 E0.04905 ; perimeter
G1 X52.381 Y76.088 E0.01732 ; perimeter
G1 X52.216 Y76.511 E0.01870 ; perimeter
G1 X52.145 Y76.904 E0.01647 ; perimeter
G1 X52.142 Y77.294 E0.01609 ; perimeter
G1 X52.230 Y77.821 E0.02199 ; perimeter
G1 X52.379 Y78.229 E0.01791 ; perimeter
G1 X52.585 Y78.610 E0.01781 ; perimeter
G1 X52.970 Y79.098 E0.02564 ; perimeter
G1 X53.220 Y79.333 E0.01411 ; perimeter
G1 X78.091 Y100.203 E1.33751 ; perimeter
G1 X107.170 Y100.203 E1.19792 ; perimeter
G1 X107.171 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X107.568 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.049 Y101.134 E0.92769 ; perimeter
G1 X85.041 Y102.286 E0.04744 ; perimeter
G1 X79.154 Y102.286 E0.24249 ; perimeter
G1 X79.146 Y101.134 E0.04744 ; perimeter
G1 X77.752 Y101.134 E0.05743 ; perimeter
G1 X52.605 Y80.034 E1.35232 ; perimeter
G1 X52.194 Y79.645 E0.02332 ; perimeter
G1 X51.840 Y79.218 E0.02281 ; perimeter
G1 X51.547 Y78.761 E0.02238 ; perimeter
G1 X51.319 Y78.283 E0.02184 ; perimeter
G1 X51.182 Y77.874 E0.01776 ; perimeter
G1 X51.075 Y77.308 E0.02374 ; perimeter
G1 X51.058 Y76.890 E0.01725 ; perimeter
G1 X51.116 Y76.376 E0.02131 ; perimeter
G1 X51.226 Y75.985 E0.01671 ; perimeter
G1 X51.431 Y75.554 E0.01967 ; perimeter
G1 X51.668 Y75.219 E0.01693 ; perimeter
G1 X52.824 Y73.842 E0.07406 ; perimeter
G1 X53.939 Y74.777 E0.05995 ; perimeter
G1 X52.932 Y75.976 E0.06449 ; perimeter
G1 X52.735 Y76.272 E0.01465 ; perimeter
G1 X52.599 Y76.619 E0.01536 ; perimeter
G1 X52.541 Y76.941 E0.01347 ; perimeter
G1 X52.539 Y77.263 E0.01327 ; perimeter
G1 X52.615 Y77.719 E0.01907 ; perimeter
G1 X52.742 Y78.066 E0.01521 ; perimeter
G1 X52.917 Y78.391 E0.01521 ; perimeter
G1 X53.263 Y78.830 E0.02302 ; perimeter
G1 X53.483 Y79.037 E0.01243 ; perimeter
G1 X78.235 Y99.806 E1.33110 ; perimeter
G1 X107.565 Y99.806 E1.20826 ; perimeter
G1 X107.568 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X107.168 Y101.128 F10800.000 ; move inwards before travel
G1 F8640
G1 X104.277 Y101.083 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X83.815 Y101.378 ; move to first infill point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7360.29
G1 X83.352 Y100.915 E0.03328 ; infill
G1 X82.661 Y100.915 E0.03516 ; infill
G1 X82.923 Y101.177 E0.01884 ; infill
G1 X82.231 Y101.177 E0.03516 ; infill
G1 X81.969 Y100.915 E0.01884 ; infill
G1 X81.277 Y100.915 E0.03516 ; infill
G1 X81.539 Y101.177 E0.01884 ; infill
G1 X80.848 Y101.177 E0.03516 ; infill
G1 X80.385 Y100.714 E0.03328 ; infill
G1 F8640
G1 X80.848 Y101.177 E-0.15118 ; wipe and retract
G1 X81.539 Y101.177 E-0.15972 ; wipe and retract
G1 X81.277 Y100.915 E-0.08559 ; wipe and retract
G1 X81.969 Y100.915 E-0.15972 ; wipe and retract
G1 X82.231 Y101.177 E-0.08559 ; wipe and retract
G1 X82.743 Y101.177 E-0.11821 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X59.476 Y73.013 ; move to first perimeter point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X56.791 Y70.761 E0.14436 ; perimeter
G1 X54.342 Y73.679 E0.15696 ; perimeter
G1 X53.835 Y73.253 E0.02729 ; perimeter
G1 X62.832 Y62.531 E0.57663 ; perimeter
G1 X63.340 Y62.957 E0.02729 ; perimeter
G1 X60.890 Y65.875 E0.15696 ; perimeter
G1 X63.575 Y68.128 E0.14436 ; perimeter
G1 X63.231 Y68.538 E0.02205 ; perimeter
G1 X60.546 Y66.285 E0.14436 ; perimeter
G1 X57.135 Y70.351 E0.21861 ; perimeter
G1 X59.820 Y72.603 E0.14436 ; perimeter
G1 X59.514 Y72.967 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.524 Y73.571 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X56.840 Y71.319 E0.14436 ; perimeter
G1 X54.391 Y74.238 E0.15696 ; perimeter
G1 X53.276 Y73.302 E0.05995 ; perimeter
G1 X62.783 Y61.972 E0.60929 ; perimeter
G1 X63.898 Y62.908 E0.05995 ; perimeter
G1 X61.449 Y65.826 E0.15696 ; perimeter
G1 X64.133 Y68.079 E0.14436 ; perimeter
G1 X63.280 Y69.096 E0.05471 ; perimeter
G1 X60.595 Y66.844 E0.14436 ; perimeter
G1 X57.694 Y70.302 E0.18596 ; perimeter
G1 X60.378 Y72.554 E0.14436 ; perimeter
G1 X59.563 Y73.526 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.251 Y73.279 F10800.000 ; move inwards before travel
G1 F8640
G1 X57.006 Y71.453 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X102.062 Y81.038 ; move to first perimeter point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.17362 ; perimeter
G1 X97.847 Y80.143 E0.03683 ; perimeter
G1 X102.062 Y80.143 E0.17362 ; perimeter
G1 X102.062 Y80.978 E0.03436 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.458 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.28289 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X67.570 Y62.231 E0.76199 ; perimeter
G1 X67.301 Y62.031 E0.01382 ; perimeter
G1 X66.867 Y61.785 E0.02051 ; perimeter
G1 X66.398 Y61.612 E0.02060 ; perimeter
G1 X65.919 Y61.521 E0.02010 ; perimeter
G1 X65.444 Y61.515 E0.01955 ; perimeter
G1 X64.993 Y61.594 E0.01888 ; perimeter
G1 X64.616 Y61.734 E0.01657 ; perimeter
G1 X64.381 Y61.877 E0.01134 ; perimeter
G1 X63.824 Y61.409 E0.02996 ; perimeter
G1 X64.125 Y61.193 E0.01529 ; perimeter
G1 X64.435 Y61.044 E0.01416 ; perimeter
G1 X64.871 Y60.915 E0.01873 ; perimeter
G1 X65.232 Y60.867 E0.01501 ; perimeter
G1 X65.600 Y60.865 E0.01517 ; perimeter
G1 X66.125 Y60.932 E0.02181 ; perimeter
G1 X66.679 Y61.093 E0.02373 ; perimeter
G1 X67.140 Y61.300 E0.02085 ; perimeter
G1 X67.486 Y61.502 E0.01648 ; perimeter
G1 X67.902 Y61.812 E0.02140 ; perimeter
G1 X81.934 Y73.586 E0.75456 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y79.747 E0.04744 ; perimeter
G1 X102.458 Y79.747 E0.20628 ; perimeter
G1 X102.458 Y81.374 E0.06702 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.855 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.30516 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X67.323 Y62.542 E0.76747 ; perimeter
G1 X67.084 Y62.363 E0.01233 ; perimeter
G1 X66.700 Y62.146 E0.01817 ; perimeter
G1 X66.292 Y61.995 E0.01792 ; perimeter
G1 X65.879 Y61.917 E0.01730 ; perimeter
G1 X65.476 Y61.912 E0.01660 ; perimeter
G1 X65.097 Y61.978 E0.01588 ; perimeter
G1 X64.789 Y62.092 E0.01351 ; perimeter
G1 X64.471 Y62.286 E0.01536 ; perimeter
G1 X64.368 Y62.384 E0.00583 ; perimeter
G1 X63.236 Y61.433 E0.06091 ; perimeter
G1 X63.592 Y61.081 E0.02063 ; perimeter
G1 X63.925 Y60.850 E0.01672 ; perimeter
G1 X64.292 Y60.673 E0.01677 ; perimeter
G1 X64.788 Y60.527 E0.02131 ; perimeter
G1 X65.205 Y60.470 E0.01733 ; perimeter
G1 X65.624 Y60.469 E0.01729 ; perimeter
G1 X66.206 Y60.543 E0.02416 ; perimeter
G1 X66.816 Y60.720 E0.02615 ; perimeter
G1 X67.322 Y60.947 E0.02286 ; perimeter
G1 X67.700 Y61.168 E0.01803 ; perimeter
G1 X68.151 Y61.503 E0.02316 ; perimeter
G1 X82.078 Y73.189 E0.74895 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y79.351 E0.04744 ; perimeter
G1 X102.855 Y79.351 E0.23894 ; perimeter
G1 X102.855 Y81.770 E0.09967 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.458 Y81.777 F10800.000 ; move inwards before travel
G1 F8640
G1 X99.563 Y81.797 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X101.640 Y80.922 ; move to first infill point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7522.74
G1 X101.177 Y80.459 E0.03257 ; infill
G1 X100.500 Y80.459 E0.03366 ; infill
G1 X100.762 Y80.722 E0.01844 ; infill
G1 X100.086 Y80.722 E0.03366 ; infill
G1 X99.823 Y80.459 E0.01844 ; infill
G1 X99.147 Y80.459 E0.03366 ; infill
G1 X99.409 Y80.722 E0.01844 ; infill
G1 X98.732 Y80.722 E0.03366 ; infill
G1 X98.269 Y80.259 E0.03257 ; infill
G1 F8640
G1 X98.732 Y80.722 E-0.15118 ; wipe and retract
G1 X99.409 Y80.722 E-0.15627 ; wipe and retract
G1 X99.147 Y80.459 E-0.08559 ; wipe and retract
G1 X99.823 Y80.459 E-0.15627 ; wipe and retract
G1 X100.086 Y80.722 E-0.08559 ; wipe and retract
G1 X100.627 Y80.722 E-0.12511 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X147.938 Y81.038 ; move to first perimeter point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X147.938 Y80.143 E0.03683 ; perimeter
G1 X152.153 Y80.143 E0.17362 ; perimeter
G1 X152.153 Y81.038 E0.03683 ; perimeter
G1 X147.998 Y81.038 E0.17115 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.542 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X147.542 Y79.747 E0.06949 ; perimeter
G1 X152.549 Y79.747 E0.20628 ; perimeter
G1 X152.549 Y80.899 E0.04744 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X182.096 Y61.813 E0.75446 ; perimeter
G1 X182.418 Y61.568 E0.01668 ; perimeter
G1 X182.958 Y61.250 E0.02585 ; perimeter
G1 X183.507 Y61.029 E0.02437 ; perimeter
G1 X183.875 Y60.931 E0.01567 ; perimeter
G1 X184.253 Y60.874 E0.01576 ; perimeter
G1 X184.773 Y60.867 E0.02142 ; perimeter
G1 X185.133 Y60.916 E0.01496 ; perimeter
G1 X185.481 Y61.014 E0.01487 ; perimeter
G1 X185.876 Y61.195 E0.01792 ; perimeter
G1 X186.176 Y61.409 E0.01520 ; perimeter
G1 X185.619 Y61.877 E0.02996 ; perimeter
G1 X185.379 Y61.731 E0.01158 ; perimeter
G1 X184.937 Y61.576 E0.01930 ; perimeter
G1 X184.470 Y61.512 E0.01942 ; perimeter
G1 X184.073 Y61.522 E0.01636 ; perimeter
G1 X183.546 Y61.630 E0.02218 ; perimeter
G1 X183.126 Y61.788 E0.01847 ; perimeter
G1 X182.609 Y62.092 E0.02470 ; perimeter
G1 X168.261 Y74.121 E0.77132 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X147.602 Y81.434 E0.28042 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.145 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X147.145 Y79.351 E0.10214 ; perimeter
G1 X152.945 Y79.351 E0.23894 ; perimeter
G1 X152.945 Y80.502 E0.04744 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X181.848 Y61.504 E0.74891 ; perimeter
G1 X182.197 Y61.239 E0.01803 ; perimeter
G1 X182.783 Y60.893 E0.02804 ; perimeter
G1 X183.382 Y60.652 E0.02659 ; perimeter
G1 X183.794 Y60.542 E0.01757 ; perimeter
G1 X184.221 Y60.478 E0.01780 ; perimeter
G1 X184.797 Y60.471 E0.02374 ; perimeter
G1 X185.214 Y60.527 E0.01731 ; perimeter
G1 X185.618 Y60.640 E0.01729 ; perimeter
G1 X186.075 Y60.850 E0.02074 ; perimeter
G1 X186.462 Y61.126 E0.01958 ; perimeter
G1 X186.764 Y61.433 E0.01774 ; perimeter
G1 X185.632 Y62.384 E0.06091 ; perimeter
G1 X185.529 Y62.286 E0.00583 ; perimeter
G1 X185.209 Y62.091 E0.01544 ; perimeter
G1 X184.844 Y61.963 E0.01594 ; perimeter
G1 X184.448 Y61.909 E0.01647 ; perimeter
G1 X184.118 Y61.917 E0.01359 ; perimeter
G1 X183.656 Y62.011 E0.01942 ; perimeter
G1 X183.298 Y62.147 E0.01578 ; perimeter
G1 X182.838 Y62.417 E0.02195 ; perimeter
G1 X168.405 Y74.517 E0.77589 ; perimeter
G1 X163.268 Y74.517 E0.21163 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X147.205 Y81.830 E0.30269 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.294 Y81.459 F10800.000 ; move inwards before travel
G1 F8640
G1 X147.145 Y79.351 E-0.57269 ; wipe and retract
G1 X147.957 Y79.351 E-0.18731 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X148.360 Y80.259 ; move to first infill point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7522.76
G1 X148.823 Y80.722 E0.03257 ; infill
G1 X149.500 Y80.722 E0.03366 ; infill
G1 X149.238 Y80.459 E0.01844 ; infill
G1 X149.914 Y80.459 E0.03366 ; infill
G1 X150.176 Y80.722 E0.01844 ; infill
G1 X150.853 Y80.722 E0.03366 ; infill
G1 X150.591 Y80.459 E0.01844 ; infill
G1 X151.268 Y80.459 E0.03366 ; infill
G1 X151.731 Y80.922 E0.03257 ; infill
G1 F8640
G1 X151.268 Y80.459 E-0.15118 ; wipe and retract
G1 X150.591 Y80.459 E-0.15627 ; wipe and retract
G1 X150.853 Y80.722 E-0.08559 ; wipe and retract
G1 X150.176 Y80.722 E-0.15627 ; wipe and retract
G1 X149.914 Y80.459 E-0.08559 ; wipe and retract
G1 X149.372 Y80.459 E-0.12511 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X190.524 Y73.013 ; move to first perimeter point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X190.180 Y72.603 E0.02205 ; perimeter
G1 X192.865 Y70.351 E0.14436 ; perimeter
G1 X189.454 Y66.285 E0.21861 ; perimeter
G1 X186.769 Y68.538 E0.14436 ; perimeter
G1 X186.425 Y68.128 E0.02205 ; perimeter
G1 X189.110 Y65.875 E0.14436 ; perimeter
G1 X186.660 Y62.957 E0.15696 ; perimeter
G1 X187.168 Y62.531 E0.02729 ; perimeter
G1 X196.165 Y73.253 E0.57663 ; perimeter
G1 X195.658 Y73.679 E0.02729 ; perimeter
G1 X193.209 Y70.761 E0.15696 ; perimeter
G1 X190.570 Y72.975 E0.14189 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.476 Y73.571 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X189.622 Y72.554 E0.05471 ; perimeter
G1 X192.306 Y70.302 E0.14436 ; perimeter
G1 X189.405 Y66.844 E0.18596 ; perimeter
G1 X186.720 Y69.096 E0.14436 ; perimeter
G1 X185.867 Y68.079 E0.05471 ; perimeter
G1 X188.551 Y65.826 E0.14436 ; perimeter
G1 X186.102 Y62.908 E0.15696 ; perimeter
G1 X187.217 Y61.972 E0.05995 ; perimeter
G1 X196.724 Y73.302 E0.60929 ; perimeter
G1 X195.609 Y74.238 E0.05995 ; perimeter
G1 X193.160 Y71.319 E0.15696 ; perimeter
G1 X190.522 Y73.533 E0.14189 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.516 Y73.174 F10800.000 ; move inwards before travel
G1 F8640
G1 X189.622 Y72.554 E-0.30695 ; wipe and retract
G1 X191.125 Y71.293 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X165.746 Y101.493 ; move to first perimeter point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.740 Y100.599 E0.03683 ; perimeter
G1 X170.065 Y100.599 E0.17820 ; perimeter
G1 X170.059 Y101.493 E0.03683 ; perimeter
G1 X165.806 Y101.493 E0.17519 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.740 Y100.599 E-0.20702 ; wipe and retract
G1 X168.134 Y100.599 E-0.55298 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X142.829 Y100.738 ; move to first perimeter point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X142.830 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E1.19792 ; perimeter
G1 X196.780 Y79.333 E1.33751 ; perimeter
G1 X197.030 Y79.098 E0.01411 ; perimeter
G1 X197.415 Y78.610 E0.02564 ; perimeter
G1 X197.621 Y78.229 E0.01781 ; perimeter
G1 X197.770 Y77.821 E0.01791 ; perimeter
G1 X197.858 Y77.294 E0.02199 ; perimeter
G1 X197.855 Y76.904 E0.01609 ; perimeter
G1 X197.784 Y76.511 E0.01647 ; perimeter
G1 X197.619 Y76.088 E0.01870 ; perimeter
G1 X197.385 Y75.738 E0.01732 ; perimeter
G1 X196.620 Y74.826 E0.04905 ; perimeter
G1 X197.127 Y74.400 E0.02729 ; perimeter
G1 X198.015 Y75.458 E0.05688 ; perimeter
G1 X198.254 Y75.806 E0.01739 ; perimeter
G1 X198.424 Y76.200 E0.01771 ; perimeter
G1 X198.495 Y76.455 E0.01088 ; perimeter
G1 X198.539 Y76.804 E0.01449 ; perimeter
G1 X198.529 Y77.284 E0.01980 ; perimeter
G1 X198.435 Y77.769 E0.02034 ; perimeter
G1 X198.312 Y78.137 E0.01596 ; perimeter
G1 X198.147 Y78.490 E0.01607 ; perimeter
G1 X198.008 Y78.731 E0.01147 ; perimeter
G1 X197.774 Y79.070 E0.01698 ; perimeter
G1 X197.519 Y79.371 E0.01623 ; perimeter
G1 X197.131 Y79.738 E0.02200 ; perimeter
G1 X172.104 Y100.738 E1.34589 ; perimeter
G1 X170.461 Y100.738 E0.06769 ; perimeter
G1 X170.452 Y101.889 E0.04744 ; perimeter
G1 X165.353 Y101.889 E0.21008 ; perimeter
G1 X165.344 Y100.738 E0.04744 ; perimeter
G1 X142.889 Y100.738 E0.92506 ; perimeter
M204 S1000 ; adjust acceleration
G1 X142.432 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X142.435 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E1.20826 ; perimeter
G1 X196.517 Y79.037 E1.33110 ; perimeter
G1 X196.737 Y78.830 E0.01243 ; perimeter
G1 X197.083 Y78.391 E0.02302 ; perimeter
G1 X197.258 Y78.066 E0.01521 ; perimeter
G1 X197.385 Y77.719 E0.01521 ; perimeter
G1 X197.461 Y77.263 E0.01907 ; perimeter
G1 X197.459 Y76.941 E0.01327 ; perimeter
G1 X197.401 Y76.619 E0.01347 ; perimeter
G1 X197.265 Y76.272 E0.01536 ; perimeter
G1 X197.068 Y75.976 E0.01465 ; perimeter
G1 X196.061 Y74.777 E0.06449 ; perimeter
G1 X197.176 Y73.842 E0.05995 ; perimeter
G1 X198.331 Y75.217 E0.07399 ; perimeter
G1 X198.602 Y75.613 E0.01977 ; perimeter
G1 X198.799 Y76.068 E0.02042 ; perimeter
G1 X198.884 Y76.377 E0.01319 ; perimeter
G1 X198.935 Y76.783 E0.01687 ; perimeter
G1 X198.908 Y77.438 E0.02699 ; perimeter
G1 X198.819 Y77.873 E0.01829 ; perimeter
G1 X198.681 Y78.284 E0.01787 ; perimeter
G1 X198.499 Y78.674 E0.01772 ; perimeter
G1 X198.343 Y78.943 E0.01284 ; perimeter
G1 X198.089 Y79.312 E0.01844 ; perimeter
G1 X197.807 Y79.644 E0.01794 ; perimeter
G1 X197.395 Y80.034 E0.02338 ; perimeter
G1 X172.248 Y101.134 E1.35232 ; perimeter
M73 P46 R72
G1 X170.854 Y101.134 E0.05743 ; perimeter
G1 X170.846 Y102.286 E0.04744 ; perimeter
G1 X164.959 Y102.286 E0.24249 ; perimeter
G1 X164.951 Y101.134 E0.04744 ; perimeter
G1 X142.492 Y101.134 E0.92521 ; perimeter
M204 S1000 ; adjust acceleration
G1 X142.638 Y100.792 F10800.000 ; move inwards before travel
G1 F8640
G1 X142.435 Y99.806 E-0.30692 ; wipe and retract
G1 X144.397 Y99.806 E-0.45308 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X166.190 Y100.714 ; move to first infill point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7360.28
G1 X166.653 Y101.177 E0.03328 ; infill
G1 X167.344 Y101.177 E0.03516 ; infill
G1 X167.082 Y100.915 E0.01884 ; infill
G1 X167.774 Y100.915 E0.03516 ; infill
G1 X168.036 Y101.177 E0.01884 ; infill
G1 X168.728 Y101.177 E0.03516 ; infill
G1 X168.466 Y100.915 E0.01884 ; infill
G1 X169.157 Y100.915 E0.03516 ; infill
G1 X169.620 Y101.378 E0.03328 ; infill
G1 F8640
G1 X169.157 Y100.915 E-0.15118 ; wipe and retract
G1 X168.466 Y100.915 E-0.15972 ; wipe and retract
G1 X168.728 Y101.177 E-0.08559 ; wipe and retract
G1 X168.036 Y101.177 E-0.15972 ; wipe and retract
G1 X167.774 Y100.915 E-0.08559 ; wipe and retract
G1 X167.262 Y100.915 E-0.11821 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X83.969 Y139.639 ; move to first perimeter point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.656 Y139.639 E0.17766 ; perimeter
G1 X79.649 Y138.745 E0.03683 ; perimeter
G1 X83.975 Y138.745 E0.17820 ; perimeter
G1 X83.969 Y139.579 E0.03436 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.678 Y139.625 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X106.886 Y138.884 ; move to first perimeter point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.370 Y138.884 E0.92753 ; perimeter
G1 X84.362 Y140.036 E0.04744 ; perimeter
G1 X79.263 Y140.036 E0.21008 ; perimeter
G1 X79.254 Y138.884 E0.04744 ; perimeter
G1 X77.611 Y138.884 E0.06769 ; perimeter
G1 X52.584 Y117.884 E1.34589 ; perimeter
G1 X52.198 Y117.519 E0.02185 ; perimeter
G1 X51.876 Y117.130 E0.02083 ; perimeter
G1 X51.609 Y116.714 E0.02035 ; perimeter
G1 X51.402 Y116.280 E0.01982 ; perimeter
G1 X51.281 Y115.920 E0.01565 ; perimeter
G1 X51.184 Y115.409 E0.02142 ; perimeter
G1 X51.170 Y115.050 E0.01479 ; perimeter
G1 X51.221 Y114.598 E0.01873 ; perimeter
G1 X51.313 Y114.271 E0.01400 ; perimeter
G1 X51.489 Y113.901 E0.01688 ; perimeter
G1 X51.697 Y113.607 E0.01485 ; perimeter
G1 X52.587 Y112.546 E0.05705 ; perimeter
G1 X53.095 Y112.972 E0.02729 ; perimeter
G1 X52.330 Y113.884 E0.04905 ; perimeter
G1 X52.096 Y114.234 E0.01732 ; perimeter
G1 X51.931 Y114.657 E0.01870 ; perimeter
G1 X51.860 Y115.050 E0.01647 ; perimeter
G1 X51.857 Y115.441 E0.01609 ; perimeter
G1 X51.945 Y115.967 E0.02199 ; perimeter
G1 X52.094 Y116.375 E0.01791 ; perimeter
G1 X52.300 Y116.756 E0.01781 ; perimeter
G1 X52.685 Y117.244 E0.02564 ; perimeter
G1 X52.934 Y117.479 E0.01411 ; perimeter
G1 X77.806 Y138.349 E1.33751 ; perimeter
G1 X106.884 Y138.349 E1.19792 ; perimeter
G1 X106.885 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X107.283 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.764 Y139.280 E0.92769 ; perimeter
G1 X84.755 Y140.432 E0.04744 ; perimeter
G1 X78.869 Y140.432 E0.24249 ; perimeter
G1 X78.861 Y139.280 E0.04744 ; perimeter
G1 X77.467 Y139.280 E0.05743 ; perimeter
G1 X52.320 Y118.180 E1.35232 ; perimeter
G1 X51.909 Y117.791 E0.02332 ; perimeter
G1 X51.555 Y117.365 E0.02281 ; perimeter
G1 X51.262 Y116.907 E0.02238 ; perimeter
G1 X51.034 Y116.429 E0.02184 ; perimeter
G1 X50.897 Y116.020 E0.01776 ; perimeter
G1 X50.789 Y115.454 E0.02374 ; perimeter
G1 X50.772 Y115.036 E0.01725 ; perimeter
G1 X50.831 Y114.522 E0.02131 ; perimeter
G1 X50.941 Y114.131 E0.01671 ; perimeter
G1 X51.146 Y113.700 E0.01967 ; perimeter
G1 X51.383 Y113.365 E0.01693 ; perimeter
G1 X52.539 Y111.988 E0.07406 ; perimeter
G1 X53.653 Y112.923 E0.05995 ; perimeter
G1 X52.647 Y114.122 E0.06449 ; perimeter
G1 X52.450 Y114.418 E0.01465 ; perimeter
G1 X52.314 Y114.765 E0.01536 ; perimeter
G1 X52.256 Y115.087 E0.01347 ; perimeter
G1 X52.254 Y115.409 E0.01327 ; perimeter
G1 X52.330 Y115.866 E0.01907 ; perimeter
G1 X52.457 Y116.212 E0.01521 ; perimeter
G1 X52.632 Y116.537 E0.01521 ; perimeter
G1 X52.978 Y116.976 E0.02302 ; perimeter
G1 X53.198 Y117.183 E0.01243 ; perimeter
G1 X77.950 Y137.952 E1.33110 ; perimeter
G1 X107.280 Y137.952 E1.20826 ; perimeter
G1 X107.283 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X106.883 Y139.274 F10800.000 ; move inwards before travel
G1 F8640
G1 X103.991 Y139.229 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X83.530 Y139.524 ; move to first infill point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7360.29
G1 X83.067 Y139.061 E0.03328 ; infill
G1 X82.375 Y139.061 E0.03516 ; infill
G1 X82.638 Y139.323 E0.01884 ; infill
G1 X81.946 Y139.323 E0.03516 ; infill
G1 X81.684 Y139.061 E0.01884 ; infill
G1 X80.992 Y139.061 E0.03516 ; infill
G1 X81.254 Y139.323 E0.01884 ; infill
G1 X80.562 Y139.323 E0.03516 ; infill
G1 X80.099 Y138.860 E0.03328 ; infill
G1 F8640
G1 X80.562 Y139.323 E-0.15118 ; wipe and retract
G1 X81.254 Y139.323 E-0.15972 ; wipe and retract
G1 X80.992 Y139.061 E-0.08559 ; wipe and retract
G1 X81.684 Y139.061 E-0.15972 ; wipe and retract
G1 X81.946 Y139.323 E-0.08559 ; wipe and retract
G1 X82.458 Y139.323 E-0.11821 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X59.190 Y111.159 ; move to first perimeter point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X56.506 Y108.907 E0.14436 ; perimeter
G1 X54.057 Y111.825 E0.15696 ; perimeter
G1 X53.549 Y111.400 E0.02729 ; perimeter
G1 X62.547 Y100.677 E0.57663 ; perimeter
G1 X63.054 Y101.103 E0.02729 ; perimeter
G1 X60.605 Y104.021 E0.15696 ; perimeter
G1 X63.290 Y106.274 E0.14436 ; perimeter
G1 X62.946 Y106.684 E0.02205 ; perimeter
G1 X60.261 Y104.432 E0.14436 ; perimeter
G1 X56.850 Y108.497 E0.21861 ; perimeter
G1 X59.535 Y110.749 E0.14436 ; perimeter
M73 Q46 S74
G1 X59.229 Y111.113 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.239 Y111.718 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X56.555 Y109.465 E0.14436 ; perimeter
G1 X54.106 Y112.384 E0.15696 ; perimeter
G1 X52.991 Y111.448 E0.05995 ; perimeter
G1 X62.498 Y100.119 E0.60929 ; perimeter
G1 X63.613 Y101.054 E0.05995 ; perimeter
G1 X61.164 Y103.973 E0.15696 ; perimeter
G1 X63.848 Y106.225 E0.14436 ; perimeter
G1 X62.994 Y107.242 E0.05471 ; perimeter
G1 X60.310 Y104.990 E0.14436 ; perimeter
G1 X57.409 Y108.448 E0.18596 ; perimeter
G1 X60.093 Y110.700 E0.14436 ; perimeter
G1 X59.278 Y111.672 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.966 Y111.425 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.721 Y109.599 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X101.777 Y119.184 ; move to first perimeter point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.17362 ; perimeter
G1 X97.562 Y118.290 E0.03683 ; perimeter
G1 X101.777 Y118.290 E0.17362 ; perimeter
G1 X101.777 Y119.124 E0.03436 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.173 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.28289 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X67.284 Y100.377 E0.76199 ; perimeter
G1 X67.015 Y100.177 E0.01382 ; perimeter
G1 X66.582 Y99.931 E0.02051 ; perimeter
G1 X66.113 Y99.758 E0.02060 ; perimeter
G1 X65.634 Y99.667 E0.02010 ; perimeter
G1 X65.159 Y99.661 E0.01955 ; perimeter
G1 X64.708 Y99.740 E0.01888 ; perimeter
G1 X64.331 Y99.880 E0.01657 ; perimeter
G1 X64.095 Y100.023 E0.01134 ; perimeter
G1 X63.538 Y99.555 E0.02996 ; perimeter
G1 X63.840 Y99.339 E0.01529 ; perimeter
G1 X64.150 Y99.190 E0.01416 ; perimeter
G1 X64.586 Y99.061 E0.01873 ; perimeter
G1 X64.947 Y99.013 E0.01501 ; perimeter
G1 X65.315 Y99.011 E0.01517 ; perimeter
G1 X65.840 Y99.078 E0.02181 ; perimeter
G1 X66.393 Y99.239 E0.02373 ; perimeter
G1 X66.855 Y99.446 E0.02085 ; perimeter
G1 X67.200 Y99.648 E0.01648 ; perimeter
G1 X67.617 Y99.958 E0.02140 ; perimeter
G1 X81.649 Y111.732 E0.75456 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y117.893 E0.04744 ; perimeter
G1 X102.173 Y117.893 E0.20628 ; perimeter
G1 X102.173 Y119.520 E0.06702 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.569 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.30516 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X67.038 Y100.688 E0.76747 ; perimeter
G1 X66.798 Y100.509 E0.01233 ; perimeter
G1 X66.415 Y100.292 E0.01817 ; perimeter
G1 X66.007 Y100.141 E0.01792 ; perimeter
G1 X65.594 Y100.063 E0.01730 ; perimeter
G1 X65.191 Y100.058 E0.01660 ; perimeter
G1 X64.811 Y100.124 E0.01588 ; perimeter
G1 X64.504 Y100.238 E0.01351 ; perimeter
G1 X64.185 Y100.432 E0.01536 ; perimeter
G1 X64.083 Y100.530 E0.00583 ; perimeter
G1 X62.950 Y99.579 E0.06091 ; perimeter
G1 X63.307 Y99.227 E0.02063 ; perimeter
G1 X63.640 Y98.996 E0.01672 ; perimeter
G1 X64.007 Y98.819 E0.01677 ; perimeter
G1 X64.503 Y98.673 E0.02131 ; perimeter
G1 X64.919 Y98.616 E0.01733 ; perimeter
G1 X65.339 Y98.615 E0.01729 ; perimeter
G1 X65.921 Y98.689 E0.02416 ; perimeter
G1 X66.530 Y98.866 E0.02615 ; perimeter
G1 X67.037 Y99.093 E0.02286 ; perimeter
G1 X67.415 Y99.314 E0.01803 ; perimeter
G1 X67.866 Y99.649 E0.02316 ; perimeter
G1 X81.793 Y111.335 E0.74895 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y117.497 E0.04744 ; perimeter
G1 X102.569 Y117.497 E0.23894 ; perimeter
G1 X102.569 Y119.916 E0.09967 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.173 Y119.923 F10800.000 ; move inwards before travel
G1 F8640
G1 X99.278 Y119.943 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X101.355 Y119.069 ; move to first infill point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7522.74
G1 X100.892 Y118.606 E0.03257 ; infill
G1 X100.215 Y118.606 E0.03366 ; infill
G1 X100.477 Y118.868 E0.01844 ; infill
G1 X99.800 Y118.868 E0.03366 ; infill
G1 X99.538 Y118.606 E0.01844 ; infill
G1 X98.862 Y118.606 E0.03366 ; infill
G1 X99.124 Y118.868 E0.01844 ; infill
G1 X98.447 Y118.868 E0.03366 ; infill
G1 X97.984 Y118.405 E0.03257 ; infill
G1 F8640
G1 X98.447 Y118.868 E-0.15118 ; wipe and retract
G1 X99.124 Y118.868 E-0.15627 ; wipe and retract
G1 X98.862 Y118.606 E-0.08559 ; wipe and retract
G1 X99.538 Y118.606 E-0.15627 ; wipe and retract
G1 X99.800 Y118.868 E-0.08559 ; wipe and retract
G1 X100.342 Y118.868 E-0.12511 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X147.653 Y119.184 ; move to first perimeter point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X147.653 Y118.290 E0.03683 ; perimeter
G1 X151.868 Y118.290 E0.17362 ; perimeter
G1 X151.868 Y119.184 E0.03683 ; perimeter
G1 X147.713 Y119.184 E0.17115 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.257 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X147.257 Y117.893 E0.06949 ; perimeter
G1 X152.264 Y117.893 E0.20628 ; perimeter
G1 X152.264 Y119.045 E0.04744 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X181.810 Y99.960 E0.75446 ; perimeter
G1 X182.133 Y99.715 E0.01668 ; perimeter
G1 X182.673 Y99.396 E0.02585 ; perimeter
G1 X183.222 Y99.175 E0.02437 ; perimeter
G1 X183.590 Y99.077 E0.01567 ; perimeter
G1 X183.968 Y99.020 E0.01576 ; perimeter
G1 X184.488 Y99.013 E0.02142 ; perimeter
G1 X184.848 Y99.062 E0.01496 ; perimeter
G1 X185.195 Y99.160 E0.01487 ; perimeter
G1 X185.591 Y99.341 E0.01792 ; perimeter
G1 X185.891 Y99.555 E0.01520 ; perimeter
G1 X185.334 Y100.023 E0.02996 ; perimeter
G1 X185.094 Y99.877 E0.01158 ; perimeter
G1 X184.652 Y99.722 E0.01930 ; perimeter
G1 X184.185 Y99.658 E0.01942 ; perimeter
G1 X183.788 Y99.668 E0.01636 ; perimeter
G1 X183.260 Y99.776 E0.02218 ; perimeter
G1 X182.841 Y99.934 E0.01847 ; perimeter
G1 X182.324 Y100.238 E0.02470 ; perimeter
G1 X167.976 Y112.267 E0.77132 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X147.317 Y119.580 E0.28042 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.860 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X146.860 Y117.497 E0.10214 ; perimeter
G1 X152.660 Y117.497 E0.23894 ; perimeter
G1 X152.660 Y118.648 E0.04744 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X181.563 Y99.650 E0.74891 ; perimeter
G1 X181.911 Y99.385 E0.01803 ; perimeter
G1 X182.498 Y99.039 E0.02804 ; perimeter
G1 X183.097 Y98.799 E0.02659 ; perimeter
G1 X183.509 Y98.688 E0.01757 ; perimeter
G1 X183.936 Y98.624 E0.01780 ; perimeter
G1 X184.512 Y98.617 E0.02374 ; perimeter
G1 X184.928 Y98.673 E0.01731 ; perimeter
G1 X185.333 Y98.787 E0.01729 ; perimeter
G1 X185.790 Y98.997 E0.02074 ; perimeter
G1 X186.177 Y99.272 E0.01958 ; perimeter
G1 X186.479 Y99.579 E0.01774 ; perimeter
G1 X185.346 Y100.530 E0.06091 ; perimeter
G1 X185.244 Y100.432 E0.00583 ; perimeter
G1 X184.924 Y100.237 E0.01544 ; perimeter
G1 X184.559 Y100.109 E0.01594 ; perimeter
G1 X184.163 Y100.055 E0.01647 ; perimeter
G1 X183.833 Y100.063 E0.01359 ; perimeter
G1 X183.371 Y100.158 E0.01942 ; perimeter
G1 X183.013 Y100.293 E0.01578 ; perimeter
G1 X182.553 Y100.563 E0.02195 ; perimeter
G1 X168.120 Y112.663 E0.77589 ; perimeter
G1 X162.983 Y112.663 E0.21163 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X146.920 Y119.976 E0.30269 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.009 Y119.605 F10800.000 ; move inwards before travel
G1 F8640
G1 X146.860 Y117.497 E-0.57269 ; wipe and retract
G1 X147.671 Y117.497 E-0.18731 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X148.075 Y118.405 ; move to first infill point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7522.76
G1 X148.538 Y118.868 E0.03257 ; infill
G1 X149.214 Y118.868 E0.03366 ; infill
G1 X148.952 Y118.606 E0.01844 ; infill
G1 X149.629 Y118.606 E0.03366 ; infill
G1 X149.891 Y118.868 E0.01844 ; infill
G1 X150.568 Y118.868 E0.03366 ; infill
G1 X150.306 Y118.606 E0.01844 ; infill
G1 X150.983 Y118.606 E0.03366 ; infill
G1 X151.446 Y119.069 E0.03257 ; infill
G1 F8640
G1 X150.983 Y118.606 E-0.15118 ; wipe and retract
G1 X150.306 Y118.606 E-0.15627 ; wipe and retract
G1 X150.568 Y118.868 E-0.08559 ; wipe and retract
G1 X149.891 Y118.868 E-0.15627 ; wipe and retract
G1 X149.629 Y118.606 E-0.08559 ; wipe and retract
G1 X149.087 Y118.606 E-0.12511 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X190.239 Y111.159 ; move to first perimeter point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X189.895 Y110.749 E0.02205 ; perimeter
G1 X192.580 Y108.497 E0.14436 ; perimeter
G1 X189.168 Y104.432 E0.21861 ; perimeter
G1 X186.484 Y106.684 E0.14436 ; perimeter
G1 X186.140 Y106.274 E0.02205 ; perimeter
G1 X188.824 Y104.021 E0.14436 ; perimeter
G1 X186.375 Y101.103 E0.15696 ; perimeter
G1 X186.883 Y100.677 E0.02729 ; perimeter
G1 X195.880 Y111.400 E0.57663 ; perimeter
G1 X195.373 Y111.825 E0.02729 ; perimeter
G1 X192.924 Y108.907 E0.15696 ; perimeter
G1 X190.285 Y111.121 E0.14189 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.190 Y111.718 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X189.337 Y110.700 E0.05471 ; perimeter
G1 X192.021 Y108.448 E0.14436 ; perimeter
G1 X189.120 Y104.990 E0.18596 ; perimeter
G1 X186.435 Y107.242 E0.14436 ; perimeter
G1 X185.582 Y106.225 E0.05471 ; perimeter
G1 X188.266 Y103.973 E0.14436 ; perimeter
G1 X185.817 Y101.054 E0.15696 ; perimeter
G1 X186.932 Y100.119 E0.05995 ; perimeter
G1 X196.439 Y111.448 E0.60929 ; perimeter
G1 X195.324 Y112.384 E0.05995 ; perimeter
G1 X192.875 Y109.465 E0.15696 ; perimeter
G1 X190.236 Y111.679 E0.14189 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.231 Y111.320 F10800.000 ; move inwards before travel
G1 F8640
G1 X189.337 Y110.700 E-0.30695 ; wipe and retract
G1 X190.840 Y109.439 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X165.461 Y139.639 ; move to first perimeter point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.454 Y138.745 E0.03683 ; perimeter
G1 X169.780 Y138.745 E0.17820 ; perimeter
G1 X169.774 Y139.639 E0.03683 ; perimeter
G1 X165.521 Y139.639 E0.17519 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.454 Y138.745 E-0.20702 ; wipe and retract
G1 X167.849 Y138.745 E-0.55298 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X142.544 Y138.884 ; move to first perimeter point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X142.545 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E1.19792 ; perimeter
G1 X196.495 Y117.479 E1.33751 ; perimeter
G1 X196.745 Y117.244 E0.01411 ; perimeter
G1 X197.130 Y116.756 E0.02564 ; perimeter
G1 X197.335 Y116.375 E0.01781 ; perimeter
G1 X197.485 Y115.967 E0.01791 ; perimeter
G1 X197.572 Y115.441 E0.02199 ; perimeter
G1 X197.570 Y115.050 E0.01609 ; perimeter
G1 X197.498 Y114.657 E0.01647 ; perimeter
G1 X197.333 Y114.234 E0.01870 ; perimeter
G1 X197.100 Y113.884 E0.01732 ; perimeter
G1 X196.335 Y112.972 E0.04905 ; perimeter
G1 X196.842 Y112.546 E0.02729 ; perimeter
G1 X197.730 Y113.604 E0.05688 ; perimeter
G1 X197.969 Y113.952 E0.01739 ; perimeter
G1 X198.139 Y114.346 E0.01771 ; perimeter
G1 X198.210 Y114.601 E0.01088 ; perimeter
G1 X198.253 Y114.950 E0.01449 ; perimeter
G1 X198.244 Y115.431 E0.01980 ; perimeter
G1 X198.150 Y115.915 E0.02034 ; perimeter
G1 X198.027 Y116.283 E0.01596 ; perimeter
G1 X197.862 Y116.636 E0.01607 ; perimeter
G1 X197.722 Y116.877 E0.01147 ; perimeter
G1 X197.489 Y117.217 E0.01698 ; perimeter
G1 X197.234 Y117.517 E0.01623 ; perimeter
G1 X196.846 Y117.884 E0.02200 ; perimeter
G1 X171.819 Y138.884 E1.34589 ; perimeter
G1 X170.176 Y138.884 E0.06769 ; perimeter
G1 X170.167 Y140.036 E0.04744 ; perimeter
G1 X165.068 Y140.036 E0.21008 ; perimeter
G1 X165.059 Y138.884 E0.04744 ; perimeter
G1 X142.604 Y138.884 E0.92506 ; perimeter
M204 S1000 ; adjust acceleration
G1 X142.147 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X142.150 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E1.20826 ; perimeter
G1 X196.232 Y117.183 E1.33110 ; perimeter
G1 X196.452 Y116.976 E0.01243 ; perimeter
G1 X196.797 Y116.537 E0.02302 ; perimeter
G1 X196.973 Y116.212 E0.01521 ; perimeter
G1 X197.100 Y115.866 E0.01521 ; perimeter
G1 X197.176 Y115.409 E0.01907 ; perimeter
G1 X197.174 Y115.087 E0.01327 ; perimeter
G1 X197.115 Y114.765 E0.01347 ; perimeter
G1 X196.980 Y114.418 E0.01536 ; perimeter
G1 X196.782 Y114.122 E0.01465 ; perimeter
G1 X195.776 Y112.923 E0.06449 ; perimeter
G1 X196.891 Y111.988 E0.05995 ; perimeter
G1 X198.046 Y113.364 E0.07399 ; perimeter
G1 X198.317 Y113.759 E0.01977 ; perimeter
G1 X198.513 Y114.214 E0.02042 ; perimeter
G1 X198.599 Y114.523 E0.01319 ; perimeter
G1 X198.650 Y114.929 E0.01687 ; perimeter
G1 X198.623 Y115.584 E0.02699 ; perimeter
G1 X198.533 Y116.019 E0.01829 ; perimeter
G1 X198.396 Y116.430 E0.01787 ; perimeter
G1 X198.214 Y116.820 E0.01772 ; perimeter
G1 X198.058 Y117.089 E0.01284 ; perimeter
G1 X197.804 Y117.458 E0.01844 ; perimeter
G1 X197.522 Y117.790 E0.01794 ; perimeter
G1 X197.110 Y118.180 E0.02338 ; perimeter
G1 X171.963 Y139.280 E1.35232 ; perimeter
G1 X170.569 Y139.280 E0.05743 ; perimeter
G1 X170.561 Y140.432 E0.04744 ; perimeter
G1 X164.674 Y140.432 E0.24249 ; perimeter
G1 X164.666 Y139.280 E0.04744 ; perimeter
G1 X142.207 Y139.280 E0.92521 ; perimeter
M204 S1000 ; adjust acceleration
G1 X142.353 Y138.938 F10800.000 ; move inwards before travel
G1 F8640
G1 X142.150 Y137.952 E-0.30692 ; wipe and retract
G1 X144.112 Y137.952 E-0.45308 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
G1 X165.905 Y138.860 ; move to first infill point
G1 Z9.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7360.28
G1 X166.368 Y139.323 E0.03328 ; infill
G1 X167.059 Y139.323 E0.03516 ; infill
G1 X166.797 Y139.061 E0.01884 ; infill
G1 X167.489 Y139.061 E0.03516 ; infill
G1 X167.751 Y139.323 E0.01884 ; infill
G1 X168.443 Y139.323 E0.03516 ; infill
G1 X168.181 Y139.061 E0.01884 ; infill
G1 X168.872 Y139.061 E0.03516 ; infill
G1 X169.335 Y139.524 E0.03328 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;10


G1 F8640
G1 X168.872 Y139.061 E-0.15118 ; wipe and retract
G1 X168.181 Y139.061 E-0.15972 ; wipe and retract
G1 X168.443 Y139.323 E-0.08559 ; wipe and retract
G1 X167.751 Y139.323 E-0.15972 ; wipe and retract
G1 X167.489 Y139.061 E-0.08559 ; wipe and retract
G1 X166.977 Y139.061 E-0.11821 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;10
G1 X84.255 Y101.668 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.940 Y101.668 E0.17774 ; perimeter
G1 X79.940 Y100.599 E0.04404 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y101.608 E0.04157 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.964 Y101.654 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X106.665 Y100.738 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.90687 ; perimeter
G1 X84.651 Y102.064 E0.05465 ; perimeter
G1 X79.544 Y102.064 E0.21040 ; perimeter
G1 X79.544 Y100.738 E0.05465 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X52.735 Y79.625 E1.35310 ; perimeter
G1 X52.350 Y79.261 E0.02182 ; perimeter
G1 X52.028 Y78.873 E0.02079 ; perimeter
G1 X51.761 Y78.458 E0.02032 ; perimeter
G1 X51.554 Y78.025 E0.01978 ; perimeter
G1 X51.431 Y77.656 E0.01599 ; perimeter
G1 X51.336 Y77.155 E0.02104 ; perimeter
G1 X51.321 Y76.789 E0.01509 ; perimeter
G1 X51.371 Y76.344 E0.01842 ; perimeter
G1 X51.465 Y76.011 E0.01425 ; perimeter
G1 X51.638 Y75.647 E0.01663 ; perimeter
G1 X51.848 Y75.348 E0.01505 ; perimeter
G1 X52.739 Y74.287 E0.05704 ; perimeter
G1 X53.246 Y74.713 E0.02729 ; perimeter
G1 X52.481 Y75.625 E0.04904 ; perimeter
G1 X52.249 Y75.972 E0.01718 ; perimeter
G1 X52.084 Y76.392 E0.01858 ; perimeter
G1 X52.010 Y76.797 E0.01697 ; perimeter
G1 X52.009 Y77.200 E0.01662 ; perimeter
G1 X52.096 Y77.708 E0.02121 ; perimeter
G1 X52.247 Y78.120 E0.01808 ; perimeter
G1 X52.456 Y78.504 E0.01801 ; perimeter
G1 X52.825 Y78.974 E0.02462 ; perimeter
G1 X53.085 Y79.220 E0.01473 ; perimeter
G1 X78.091 Y100.203 E1.34476 ; perimeter
G1 X106.666 Y100.203 E1.17719 ; perimeter
G1 X106.665 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X107.060 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.90682 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.996 Y102.461 E0.00301 ; perimeter
G1 X79.199 Y102.461 E0.23879 ; perimeter
G1 X79.147 Y102.409 E0.00301 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X52.471 Y79.921 E1.35953 ; perimeter
G1 X52.060 Y79.533 E0.02329 ; perimeter
G1 X51.707 Y79.107 E0.02277 ; perimeter
G1 X51.414 Y78.651 E0.02234 ; perimeter
G1 X51.186 Y78.173 E0.02180 ; perimeter
G1 X51.046 Y77.757 E0.01810 ; perimeter
G1 X50.941 Y77.200 E0.02335 ; perimeter
G1 X50.924 Y76.774 E0.01755 ; perimeter
G1 X50.981 Y76.268 E0.02099 ; perimeter
G1 X51.092 Y75.872 E0.01696 ; perimeter
G1 X51.294 Y75.446 E0.01942 ; perimeter
G1 X51.534 Y75.106 E0.01713 ; perimeter
G1 X52.690 Y73.729 E0.07405 ; perimeter
G1 X53.804 Y74.664 E0.05995 ; perimeter
G1 X52.798 Y75.863 E0.06448 ; perimeter
G1 X52.602 Y76.157 E0.01454 ; perimeter
G1 X52.467 Y76.501 E0.01523 ; perimeter
G1 X52.406 Y76.833 E0.01392 ; perimeter
G1 X52.406 Y77.167 E0.01376 ; perimeter
G1 X52.481 Y77.606 E0.01832 ; perimeter
G1 X52.609 Y77.957 E0.01540 ; perimeter
G1 X52.788 Y78.286 E0.01542 ; perimeter
G1 X53.119 Y78.706 E0.02205 ; perimeter
G1 X53.349 Y78.924 E0.01305 ; perimeter
G1 X78.235 Y99.806 E1.33833 ; perimeter
G1 X107.064 Y99.806 E1.18763 ; perimeter
G1 X107.060 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X106.660 Y101.128 F10800.000 ; move inwards before travel
G1 F8640
G1 X103.769 Y101.083 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X83.110 Y101.553 ; move to first infill point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7109.93
G1 X83.748 Y100.915 E0.04748 ; infill
G1 X83.032 Y100.915 E0.03768 ; infill
G1 X82.595 Y101.352 E0.03254 ; infill
G1 X81.879 Y101.352 E0.03768 ; infill
G1 X82.316 Y100.915 E0.03254 ; infill
G1 X81.600 Y100.915 E0.03768 ; infill
G1 X81.163 Y101.352 E0.03254 ; infill
G1 X80.447 Y101.352 E0.03768 ; infill
G1 X81.085 Y100.714 E0.04748 ; infill
G1 F8640
G1 X80.447 Y101.352 E-0.20834 ; wipe and retract
G1 X81.163 Y101.352 E-0.16534 ; wipe and retract
G1 X81.600 Y100.915 E-0.14275 ; wipe and retract
G1 X82.316 Y100.915 E-0.16534 ; wipe and retract
G1 X82.076 Y101.155 E-0.07823 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X59.336 Y72.896 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X56.657 Y70.648 E0.14409 ; perimeter
G1 X54.208 Y73.567 E0.15696 ; perimeter
G1 X53.701 Y73.141 E0.02729 ; perimeter
G1 X62.698 Y62.418 E0.57663 ; perimeter
G1 X63.205 Y62.844 E0.02729 ; perimeter
G1 X60.756 Y65.763 E0.15696 ; perimeter
G1 X63.436 Y68.011 E0.14409 ; perimeter
G1 X63.092 Y68.421 E0.02205 ; perimeter
G1 X60.412 Y66.173 E0.14409 ; perimeter
G1 X57.001 Y70.238 E0.21861 ; perimeter
G1 X59.681 Y72.486 E0.14409 ; perimeter
G1 X59.375 Y72.850 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.385 Y73.455 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X56.706 Y71.207 E0.14409 ; perimeter
G1 X54.257 Y74.125 E0.15696 ; perimeter
G1 X53.142 Y73.190 E0.05995 ; perimeter
G1 X62.649 Y61.860 E0.60929 ; perimeter
G1 X63.764 Y62.795 E0.05995 ; perimeter
G1 X61.315 Y65.714 E0.15696 ; perimeter
G1 X63.994 Y67.962 E0.14409 ; perimeter
G1 X63.140 Y68.980 E0.05471 ; perimeter
G1 X60.461 Y66.731 E0.14409 ; perimeter
G1 X57.560 Y70.189 E0.18596 ; perimeter
G1 X60.239 Y72.437 E0.14409 ; perimeter
G1 X59.424 Y73.409 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.112 Y73.163 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.867 Y71.337 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X101.812 Y81.038 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.16332 ; perimeter
G1 X97.847 Y79.968 E0.04404 ; perimeter
G1 X101.812 Y79.968 E0.16332 ; perimeter
G1 X101.812 Y80.978 E0.04157 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.208 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.27259 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X67.435 Y62.118 E0.76924 ; perimeter
G1 X67.150 Y61.907 E0.01460 ; perimeter
G1 X66.672 Y61.644 E0.02250 ; perimeter
G1 X66.253 Y61.497 E0.01828 ; perimeter
G1 X65.782 Y61.408 E0.01973 ; perimeter
G1 X65.313 Y61.402 E0.01935 ; perimeter
G1 X64.864 Y61.480 E0.01877 ; perimeter
G1 X64.476 Y61.624 E0.01704 ; perimeter
G1 X64.247 Y61.764 E0.01107 ; perimeter
G1 X63.689 Y61.296 E0.02998 ; perimeter
G1 X63.991 Y61.081 E0.01525 ; perimeter
G1 X64.305 Y60.930 E0.01438 ; perimeter
G1 X64.734 Y60.803 E0.01842 ; perimeter
G1 X65.102 Y60.754 E0.01528 ; perimeter
G1 X65.477 Y60.753 E0.01547 ; perimeter
G1 X65.994 Y60.820 E0.02147 ; perimeter
G1 X66.538 Y60.978 E0.02333 ; perimeter
G1 X66.999 Y61.184 E0.02081 ; perimeter
G1 X67.352 Y61.390 E0.01682 ; perimeter
G1 X67.768 Y61.699 E0.02138 ; perimeter
G1 X81.934 Y73.586 E0.76177 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y79.572 E0.05465 ; perimeter
G1 X102.208 Y79.572 E0.19598 ; perimeter
G1 X102.208 Y81.374 E0.07423 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.605 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.29486 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X67.189 Y62.430 E0.77469 ; perimeter
G1 X66.936 Y62.242 E0.01300 ; perimeter
G1 X66.509 Y62.007 E0.02005 ; perimeter
G1 X66.150 Y61.880 E0.01569 ; perimeter
G1 X65.743 Y61.804 E0.01706 ; perimeter
G1 X65.344 Y61.799 E0.01643 ; perimeter
G1 X64.967 Y61.864 E0.01577 ; perimeter
G1 X64.650 Y61.982 E0.01394 ; perimeter
G1 X64.334 Y62.175 E0.01523 ; perimeter
G1 X64.234 Y62.271 E0.00572 ; perimeter
G1 X63.102 Y61.321 E0.06091 ; perimeter
M73 P47 R71
G1 X63.453 Y60.972 E0.02038 ; perimeter
G1 X63.790 Y60.738 E0.01692 ; perimeter
G1 X64.162 Y60.559 E0.01700 ; perimeter
G1 X64.651 Y60.415 E0.02099 ; perimeter
G1 X65.075 Y60.358 E0.01762 ; perimeter
G1 X65.502 Y60.357 E0.01762 ; perimeter
G1 X66.075 Y60.431 E0.02380 ; perimeter
G1 X66.675 Y60.605 E0.02572 ; perimeter
G1 X67.181 Y60.831 E0.02282 ; perimeter
G1 X67.566 Y61.056 E0.01840 ; perimeter
G1 X68.017 Y61.391 E0.02313 ; perimeter
G1 X82.078 Y73.189 E0.75616 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y79.176 E0.05465 ; perimeter
G1 X102.605 Y79.176 E0.22864 ; perimeter
G1 X102.605 Y81.770 E0.10688 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.209 Y81.771 F10800.000 ; move inwards before travel
G1 F8640
G1 X99.313 Y81.798 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X100.742 Y80.922 ; move to first infill point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7643.67
G1 X101.380 Y80.284 E0.04417 ; infill
G1 X100.714 Y80.284 E0.03261 ; infill
G1 X100.277 Y80.722 E0.03026 ; infill
G1 X99.611 Y80.722 E0.03261 ; infill
G1 X100.048 Y80.284 E0.03026 ; infill
G1 X99.382 Y80.284 E0.03261 ; infill
G1 X98.945 Y80.722 E0.03026 ; infill
G1 X98.279 Y80.722 E0.03261 ; infill
G1 X98.917 Y80.084 E0.04417 ; infill
G1 F8640
G1 X98.279 Y80.722 E-0.20834 ; wipe and retract
G1 X98.945 Y80.722 E-0.15380 ; wipe and retract
G1 X99.382 Y80.284 E-0.14275 ; wipe and retract
G1 X100.048 Y80.284 E-0.15380 ; wipe and retract
G1 X99.738 Y80.595 E-0.10132 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X148.188 Y81.038 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X148.188 Y79.968 E0.04404 ; perimeter
G1 X152.153 Y79.968 E0.16332 ; perimeter
G1 X152.153 Y81.038 E0.04404 ; perimeter
M73 Q47 S73
G1 X148.248 Y81.038 E0.16085 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.792 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X147.792 Y79.572 E0.07670 ; perimeter
G1 X152.549 Y79.572 E0.19598 ; perimeter
G1 X152.549 Y80.899 E0.05465 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X182.230 Y61.701 E0.76166 ; perimeter
G1 X182.559 Y61.451 E0.01704 ; perimeter
G1 X183.091 Y61.138 E0.02543 ; perimeter
G1 X183.631 Y60.920 E0.02397 ; perimeter
G1 X184.006 Y60.819 E0.01601 ; perimeter
G1 X184.392 Y60.761 E0.01609 ; perimeter
G1 X184.903 Y60.754 E0.02104 ; perimeter
G1 X185.270 Y60.804 E0.01524 ; perimeter
G1 X185.622 Y60.904 E0.01510 ; perimeter
G1 X186.011 Y61.083 E0.01762 ; perimeter
G1 X186.311 Y61.296 E0.01518 ; perimeter
G1 X185.753 Y61.764 E0.02998 ; perimeter
G1 X185.521 Y61.621 E0.01125 ; perimeter
G1 X185.084 Y61.466 E0.01909 ; perimeter
G1 X184.622 Y61.400 E0.01923 ; perimeter
G1 X184.215 Y61.409 E0.01676 ; perimeter
G1 X183.743 Y61.497 E0.01977 ; perimeter
G1 X183.286 Y61.665 E0.02007 ; perimeter
G1 X182.958 Y61.838 E0.01529 ; perimeter
G1 X182.725 Y61.994 E0.01154 ; perimeter
G1 X168.261 Y74.121 E0.77758 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X147.852 Y81.434 E0.27012 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.395 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X147.395 Y79.176 E0.10936 ; perimeter
G1 X152.945 Y79.176 E0.22864 ; perimeter
G1 X152.945 Y80.502 E0.05465 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X181.982 Y61.391 E0.75612 ; perimeter
G1 X182.338 Y61.121 E0.01840 ; perimeter
G1 X182.915 Y60.781 E0.02760 ; perimeter
G1 X183.504 Y60.544 E0.02617 ; perimeter
G1 X183.925 Y60.430 E0.01793 ; perimeter
G1 X184.360 Y60.365 E0.01814 ; perimeter
G1 X184.927 Y60.358 E0.02335 ; perimeter
G1 X185.350 Y60.415 E0.01760 ; perimeter
G1 X185.760 Y60.531 E0.01754 ; perimeter
G1 X186.210 Y60.738 E0.02042 ; perimeter
G1 X186.593 Y61.010 E0.01935 ; perimeter
G1 X186.898 Y61.321 E0.01793 ; perimeter
G1 X185.766 Y62.271 E0.06091 ; perimeter
G1 X185.666 Y62.175 E0.00572 ; perimeter
G1 X185.349 Y61.981 E0.01530 ; perimeter
G1 X184.989 Y61.853 E0.01575 ; perimeter
G1 X184.598 Y61.797 E0.01627 ; perimeter
G1 X184.256 Y61.804 E0.01408 ; perimeter
G1 X183.849 Y61.881 E0.01707 ; perimeter
G1 X183.447 Y62.028 E0.01761 ; perimeter
G1 X183.161 Y62.179 E0.01333 ; perimeter
G1 X182.964 Y62.311 E0.00981 ; perimeter
G1 X168.405 Y74.517 E0.78264 ; perimeter
G1 X163.268 Y74.517 E0.21163 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X147.455 Y81.830 E0.29239 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.544 Y81.459 F10800.000 ; move inwards before travel
G1 F8640
G1 X147.395 Y79.176 E-0.61310 ; wipe and retract
G1 X148.032 Y79.176 E-0.14690 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X149.258 Y80.084 ; move to first infill point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7643.67
G1 X148.620 Y80.722 E0.04417 ; infill
G1 X149.286 Y80.722 E0.03261 ; infill
G1 X149.723 Y80.284 E0.03026 ; infill
G1 X150.389 Y80.284 E0.03261 ; infill
G1 X149.952 Y80.722 E0.03026 ; infill
G1 X150.618 Y80.722 E0.03261 ; infill
G1 X151.055 Y80.284 E0.03026 ; infill
G1 X151.721 Y80.284 E0.03261 ; infill
G1 X151.083 Y80.922 E0.04417 ; infill
G1 F8640
G1 X151.721 Y80.284 E-0.20834 ; wipe and retract
G1 X151.055 Y80.284 E-0.15380 ; wipe and retract
G1 X150.618 Y80.722 E-0.14275 ; wipe and retract
G1 X149.952 Y80.722 E-0.15380 ; wipe and retract
G1 X150.262 Y80.411 E-0.10132 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X190.664 Y72.896 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X190.319 Y72.486 E0.02205 ; perimeter
G1 X192.999 Y70.238 E0.14409 ; perimeter
G1 X189.588 Y66.173 E0.21861 ; perimeter
G1 X186.908 Y68.421 E0.14409 ; perimeter
G1 X186.564 Y68.011 E0.02205 ; perimeter
G1 X189.244 Y65.763 E0.14409 ; perimeter
G1 X186.795 Y62.844 E0.15696 ; perimeter
G1 X187.302 Y62.418 E0.02729 ; perimeter
G1 X196.299 Y73.141 E0.57663 ; perimeter
G1 X195.792 Y73.567 E0.02729 ; perimeter
G1 X193.343 Y70.648 E0.15696 ; perimeter
G1 X190.710 Y72.858 E0.14161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.615 Y73.455 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X189.761 Y72.437 E0.05471 ; perimeter
G1 X192.440 Y70.189 E0.14409 ; perimeter
G1 X189.539 Y66.731 E0.18596 ; perimeter
G1 X186.860 Y68.980 E0.14409 ; perimeter
G1 X186.006 Y67.962 E0.05471 ; perimeter
G1 X188.685 Y65.714 E0.14409 ; perimeter
G1 X186.236 Y62.795 E0.15696 ; perimeter
G1 X187.351 Y61.860 E0.05995 ; perimeter
G1 X196.858 Y73.190 E0.60929 ; perimeter
G1 X195.743 Y74.125 E0.05995 ; perimeter
G1 X193.294 Y71.207 E0.15696 ; perimeter
G1 X190.661 Y73.416 E0.14161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.655 Y73.057 F10800.000 ; move inwards before travel
G1 F8640
G1 X189.761 Y72.437 E-0.30695 ; wipe and retract
G1 X191.264 Y71.176 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X165.745 Y101.668 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y100.599 E0.04404 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y101.668 E0.04404 ; perimeter
G1 X165.805 Y101.668 E0.17527 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y100.599 E-0.24726 ; wipe and retract
G1 X167.966 Y100.599 E-0.51274 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X143.335 Y100.738 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X143.334 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E1.17719 ; perimeter
G1 X196.915 Y79.220 E1.34476 ; perimeter
G1 X197.175 Y78.974 E0.01473 ; perimeter
G1 X197.544 Y78.504 E0.02462 ; perimeter
G1 X197.753 Y78.120 E0.01801 ; perimeter
G1 X197.904 Y77.708 E0.01808 ; perimeter
G1 X197.991 Y77.200 E0.02121 ; perimeter
G1 X197.990 Y76.797 E0.01662 ; perimeter
G1 X197.916 Y76.392 E0.01697 ; perimeter
G1 X197.751 Y75.972 E0.01858 ; perimeter
G1 X197.519 Y75.625 E0.01718 ; perimeter
G1 X196.754 Y74.713 E0.04904 ; perimeter
G1 X197.261 Y74.287 E0.02729 ; perimeter
G1 X198.149 Y75.345 E0.05689 ; perimeter
G1 X198.386 Y75.689 E0.01719 ; perimeter
G1 X198.554 Y76.075 E0.01736 ; perimeter
G1 X198.630 Y76.346 E0.01160 ; perimeter
G1 X198.673 Y76.695 E0.01446 ; perimeter
G1 X198.647 Y77.275 E0.02392 ; perimeter
G1 X198.570 Y77.653 E0.01588 ; perimeter
G1 X198.445 Y78.027 E0.01626 ; perimeter
G1 X198.276 Y78.388 E0.01643 ; perimeter
G1 X198.151 Y78.604 E0.01028 ; perimeter
G1 X197.912 Y78.952 E0.01738 ; perimeter
G1 X197.652 Y79.259 E0.01657 ; perimeter
G1 X197.265 Y79.625 E0.02195 ; perimeter
G1 X172.104 Y100.738 E1.35310 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.064 E0.05465 ; perimeter
G1 X165.349 Y102.064 E0.21040 ; perimeter
G1 X165.349 Y100.738 E0.05465 ; perimeter
G1 X143.395 Y100.738 E0.90440 ; perimeter
M204 S1000 ; adjust acceleration
G1 X142.940 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X142.936 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E1.18763 ; perimeter
G1 X196.651 Y78.924 E1.33833 ; perimeter
G1 X196.881 Y78.706 E0.01305 ; perimeter
G1 X197.212 Y78.286 E0.02205 ; perimeter
G1 X197.391 Y77.957 E0.01542 ; perimeter
G1 X197.519 Y77.606 E0.01540 ; perimeter
G1 X197.594 Y77.167 E0.01832 ; perimeter
G1 X197.594 Y76.833 E0.01376 ; perimeter
G1 X197.533 Y76.501 E0.01392 ; perimeter
G1 X197.398 Y76.157 E0.01523 ; perimeter
G1 X197.202 Y75.863 E0.01453 ; perimeter
G1 X196.196 Y74.664 E0.06448 ; perimeter
G1 X197.310 Y73.729 E0.05995 ; perimeter
G1 X198.465 Y75.105 E0.07400 ; perimeter
G1 X198.734 Y75.496 E0.01953 ; perimeter
G1 X198.929 Y75.942 E0.02007 ; perimeter
G1 X199.019 Y76.269 E0.01396 ; perimeter
G1 X199.070 Y76.679 E0.01703 ; perimeter
G1 X199.042 Y77.323 E0.02656 ; perimeter
G1 X198.954 Y77.755 E0.01817 ; perimeter
G1 X198.814 Y78.174 E0.01820 ; perimeter
G1 X198.627 Y78.572 E0.01808 ; perimeter
G1 X198.486 Y78.816 E0.01161 ; perimeter
G1 X198.228 Y79.193 E0.01883 ; perimeter
G1 X197.940 Y79.532 E0.01831 ; perimeter
G1 X197.529 Y79.921 E0.02333 ; perimeter
G1 X172.248 Y101.134 E1.35953 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.801 Y102.461 E0.00301 ; perimeter
G1 X165.004 Y102.461 E0.23879 ; perimeter
G1 X164.953 Y102.409 E0.00301 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X143.000 Y101.134 E0.90435 ; perimeter
M204 S1000 ; adjust acceleration
G1 X143.146 Y100.791 F10800.000 ; move inwards before travel
G1 F8640
G1 X142.936 Y99.806 E-0.30700 ; wipe and retract
G1 X144.898 Y99.806 E-0.45300 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X166.890 Y100.714 ; move to first infill point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7109.92
G1 X166.252 Y101.352 E0.04749 ; infill
G1 X166.968 Y101.352 E0.03768 ; infill
G1 X167.405 Y100.915 E0.03254 ; infill
G1 X168.121 Y100.915 E0.03768 ; infill
G1 X167.684 Y101.352 E0.03254 ; infill
G1 X168.400 Y101.352 E0.03768 ; infill
G1 X168.837 Y100.915 E0.03254 ; infill
G1 X169.553 Y100.915 E0.03768 ; infill
G1 X168.915 Y101.553 E0.04749 ; infill
G1 F8640
G1 X169.553 Y100.915 E-0.20834 ; wipe and retract
G1 X168.837 Y100.915 E-0.16534 ; wipe and retract
G1 X168.400 Y101.352 E-0.14275 ; wipe and retract
G1 X167.684 Y101.352 E-0.16534 ; wipe and retract
G1 X167.923 Y101.113 E-0.07822 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X83.970 Y139.814 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.655 Y139.814 E0.17774 ; perimeter
G1 X79.655 Y138.745 E0.04404 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y139.754 E0.04157 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.678 Y139.800 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X106.380 Y138.884 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.90687 ; perimeter
G1 X84.366 Y140.211 E0.05465 ; perimeter
G1 X79.259 Y140.211 E0.21040 ; perimeter
G1 X79.259 Y138.884 E0.05465 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X52.450 Y117.771 E1.35310 ; perimeter
G1 X52.065 Y117.407 E0.02182 ; perimeter
G1 X51.742 Y117.019 E0.02079 ; perimeter
G1 X51.476 Y116.604 E0.02032 ; perimeter
G1 X51.269 Y116.171 E0.01978 ; perimeter
G1 X51.146 Y115.803 E0.01599 ; perimeter
G1 X51.051 Y115.301 E0.02104 ; perimeter
G1 X51.036 Y114.935 E0.01509 ; perimeter
G1 X51.086 Y114.490 E0.01842 ; perimeter
G1 X51.179 Y114.157 E0.01425 ; perimeter
G1 X51.353 Y113.793 E0.01663 ; perimeter
G1 X51.563 Y113.494 E0.01505 ; perimeter
G1 X52.453 Y112.434 E0.05704 ; perimeter
G1 X52.961 Y112.859 E0.02729 ; perimeter
G1 X52.196 Y113.771 E0.04904 ; perimeter
G1 X51.964 Y114.118 E0.01718 ; perimeter
G1 X51.799 Y114.538 E0.01858 ; perimeter
G1 X51.725 Y114.943 E0.01697 ; perimeter
G1 X51.724 Y115.347 E0.01662 ; perimeter
G1 X51.811 Y115.854 E0.02121 ; perimeter
G1 X51.962 Y116.266 E0.01808 ; perimeter
G1 X52.170 Y116.650 E0.01801 ; perimeter
G1 X52.540 Y117.120 E0.02462 ; perimeter
G1 X52.800 Y117.366 E0.01473 ; perimeter
G1 X77.806 Y138.349 E1.34476 ; perimeter
G1 X106.381 Y138.349 E1.17719 ; perimeter
G1 X106.380 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X106.775 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.90682 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.711 Y140.607 E0.00301 ; perimeter
G1 X78.914 Y140.607 E0.23879 ; perimeter
G1 X78.862 Y140.555 E0.00301 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X52.186 Y118.067 E1.35953 ; perimeter
G1 X51.775 Y117.679 E0.02329 ; perimeter
G1 X51.422 Y117.254 E0.02277 ; perimeter
G1 X51.129 Y116.797 E0.02234 ; perimeter
G1 X50.901 Y116.320 E0.02180 ; perimeter
G1 X50.761 Y115.903 E0.01810 ; perimeter
G1 X50.656 Y115.346 E0.02335 ; perimeter
G1 X50.638 Y114.920 E0.01755 ; perimeter
G1 X50.696 Y114.414 E0.02099 ; perimeter
G1 X50.807 Y114.018 E0.01696 ; perimeter
G1 X51.009 Y113.592 E0.01942 ; perimeter
G1 X51.249 Y113.252 E0.01713 ; perimeter
G1 X52.404 Y111.875 E0.07405 ; perimeter
G1 X53.519 Y112.811 E0.05995 ; perimeter
G1 X52.513 Y114.010 E0.06448 ; perimeter
G1 X52.317 Y114.303 E0.01454 ; perimeter
G1 X52.182 Y114.647 E0.01523 ; perimeter
G1 X52.121 Y114.979 E0.01392 ; perimeter
G1 X52.120 Y115.313 E0.01376 ; perimeter
G1 X52.195 Y115.752 E0.01832 ; perimeter
G1 X52.324 Y116.103 E0.01540 ; perimeter
G1 X52.503 Y116.432 E0.01542 ; perimeter
G1 X52.833 Y116.852 E0.02205 ; perimeter
G1 X53.063 Y117.070 E0.01305 ; perimeter
G1 X77.950 Y137.952 E1.33833 ; perimeter
G1 X106.779 Y137.952 E1.18763 ; perimeter
G1 X106.775 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X106.375 Y139.274 F10800.000 ; move inwards before travel
G1 F8640
G1 X103.483 Y139.229 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X82.825 Y139.699 ; move to first infill point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7109.93
G1 X83.463 Y139.061 E0.04748 ; infill
G1 X82.747 Y139.061 E0.03768 ; infill
G1 X82.310 Y139.498 E0.03254 ; infill
G1 X81.594 Y139.498 E0.03768 ; infill
G1 X82.031 Y139.061 E0.03254 ; infill
G1 X81.315 Y139.061 E0.03768 ; infill
G1 X80.878 Y139.498 E0.03254 ; infill
G1 X80.161 Y139.498 E0.03768 ; infill
G1 X80.800 Y138.860 E0.04748 ; infill
G1 F8640
G1 X80.161 Y139.498 E-0.20834 ; wipe and retract
G1 X80.878 Y139.498 E-0.16534 ; wipe and retract
G1 X81.315 Y139.061 E-0.14275 ; wipe and retract
G1 X82.031 Y139.061 E-0.16534 ; wipe and retract
G1 X81.791 Y139.301 E-0.07823 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X59.051 Y111.042 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X56.372 Y108.794 E0.14409 ; perimeter
G1 X53.923 Y111.713 E0.15696 ; perimeter
G1 X53.415 Y111.287 E0.02729 ; perimeter
G1 X62.413 Y100.564 E0.57663 ; perimeter
G1 X62.920 Y100.990 E0.02729 ; perimeter
G1 X60.471 Y103.909 E0.15696 ; perimeter
G1 X63.151 Y106.157 E0.14409 ; perimeter
G1 X62.806 Y106.567 E0.02205 ; perimeter
G1 X60.127 Y104.319 E0.14409 ; perimeter
G1 X56.716 Y108.384 E0.21861 ; perimeter
G1 X59.395 Y110.632 E0.14409 ; perimeter
G1 X59.090 Y110.997 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.100 Y111.601 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X56.421 Y109.353 E0.14409 ; perimeter
G1 X53.972 Y112.271 E0.15696 ; perimeter
G1 X52.857 Y111.336 E0.05995 ; perimeter
G1 X62.364 Y100.006 E0.60929 ; perimeter
G1 X63.479 Y100.941 E0.05995 ; perimeter
G1 X61.030 Y103.860 E0.15696 ; perimeter
G1 X63.709 Y106.108 E0.14409 ; perimeter
G1 X62.855 Y107.126 E0.05471 ; perimeter
G1 X60.176 Y104.877 E0.14409 ; perimeter
G1 X57.274 Y108.335 E0.18596 ; perimeter
G1 X59.954 Y110.584 E0.14409 ; perimeter
G1 X59.139 Y111.555 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.827 Y111.309 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.581 Y109.483 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X101.527 Y119.184 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.16332 ; perimeter
G1 X97.562 Y118.115 E0.04404 ; perimeter
G1 X101.527 Y118.115 E0.16332 ; perimeter
G1 X101.527 Y119.124 E0.04157 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.923 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.27259 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X67.150 Y100.264 E0.76924 ; perimeter
G1 X66.865 Y100.053 E0.01460 ; perimeter
G1 X66.386 Y99.790 E0.02250 ; perimeter
G1 X65.968 Y99.643 E0.01828 ; perimeter
G1 X65.497 Y99.554 E0.01973 ; perimeter
G1 X65.027 Y99.549 E0.01935 ; perimeter
G1 X64.578 Y99.626 E0.01877 ; perimeter
G1 X64.191 Y99.770 E0.01704 ; perimeter
G1 X63.961 Y99.910 E0.01107 ; perimeter
G1 X63.404 Y99.442 E0.02998 ; perimeter
G1 X63.705 Y99.227 E0.01525 ; perimeter
G1 X64.020 Y99.076 E0.01438 ; perimeter
G1 X64.449 Y98.949 E0.01842 ; perimeter
G1 X64.816 Y98.900 E0.01528 ; perimeter
G1 X65.192 Y98.899 E0.01547 ; perimeter
G1 X65.709 Y98.966 E0.02147 ; perimeter
G1 X66.253 Y99.124 E0.02333 ; perimeter
G1 X66.714 Y99.330 E0.02081 ; perimeter
G1 X67.067 Y99.536 E0.01682 ; perimeter
G1 X67.483 Y99.846 E0.02138 ; perimeter
G1 X81.649 Y111.732 E0.76177 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y117.718 E0.05465 ; perimeter
G1 X101.923 Y117.718 E0.19598 ; perimeter
G1 X101.923 Y119.520 E0.07423 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.319 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.29486 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X66.904 Y100.576 E0.77469 ; perimeter
G1 X66.651 Y100.388 E0.01300 ; perimeter
G1 X66.224 Y100.153 E0.02005 ; perimeter
G1 X65.865 Y100.027 E0.01569 ; perimeter
G1 X65.458 Y99.950 E0.01706 ; perimeter
G1 X65.059 Y99.945 E0.01643 ; perimeter
G1 X64.682 Y100.010 E0.01577 ; perimeter
G1 X64.364 Y100.128 E0.01394 ; perimeter
G1 X64.049 Y100.321 E0.01523 ; perimeter
G1 X63.949 Y100.417 E0.00572 ; perimeter
G1 X62.816 Y99.467 E0.06091 ; perimeter
G1 X63.168 Y99.119 E0.02038 ; perimeter
G1 X63.505 Y98.884 E0.01692 ; perimeter
G1 X63.877 Y98.705 E0.01700 ; perimeter
G1 X64.366 Y98.561 E0.02099 ; perimeter
G1 X64.790 Y98.504 E0.01762 ; perimeter
G1 X65.217 Y98.503 E0.01762 ; perimeter
G1 X65.790 Y98.577 E0.02380 ; perimeter
G1 X66.390 Y98.751 E0.02572 ; perimeter
G1 X66.896 Y98.977 E0.02282 ; perimeter
G1 X67.281 Y99.202 E0.01840 ; perimeter
G1 X67.732 Y99.537 E0.02313 ; perimeter
G1 X81.793 Y111.335 E0.75616 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y117.322 E0.05465 ; perimeter
G1 X102.319 Y117.322 E0.22864 ; perimeter
G1 X102.319 Y119.916 E0.10688 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.924 Y119.917 F10800.000 ; move inwards before travel
G1 F8640
G1 X99.028 Y119.944 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X100.457 Y119.069 ; move to first infill point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7643.67
G1 X101.095 Y118.431 E0.04417 ; infill
G1 X100.429 Y118.431 E0.03261 ; infill
G1 X99.992 Y118.868 E0.03026 ; infill
G1 X99.326 Y118.868 E0.03261 ; infill
G1 X99.763 Y118.431 E0.03026 ; infill
G1 X99.097 Y118.431 E0.03261 ; infill
G1 X98.660 Y118.868 E0.03026 ; infill
G1 X97.994 Y118.868 E0.03261 ; infill
G1 X98.632 Y118.230 E0.04417 ; infill
G1 F8640
G1 X97.994 Y118.868 E-0.20834 ; wipe and retract
G1 X98.660 Y118.868 E-0.15380 ; wipe and retract
G1 X99.097 Y118.431 E-0.14275 ; wipe and retract
G1 X99.763 Y118.431 E-0.15380 ; wipe and retract
G1 X99.453 Y118.741 E-0.10132 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X147.903 Y119.184 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X147.903 Y118.115 E0.04404 ; perimeter
G1 X151.868 Y118.115 E0.16332 ; perimeter
G1 X151.868 Y119.184 E0.04404 ; perimeter
G1 X147.963 Y119.184 E0.16085 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.507 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X147.507 Y117.718 E0.07670 ; perimeter
G1 X152.264 Y117.718 E0.19598 ; perimeter
G1 X152.264 Y119.045 E0.05465 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X181.944 Y99.847 E0.76166 ; perimeter
G1 X182.274 Y99.597 E0.01704 ; perimeter
G1 X182.806 Y99.284 E0.02543 ; perimeter
G1 X183.345 Y99.066 E0.02397 ; perimeter
G1 X183.721 Y98.965 E0.01601 ; perimeter
G1 X184.107 Y98.907 E0.01609 ; perimeter
G1 X184.618 Y98.901 E0.02104 ; perimeter
G1 X184.984 Y98.950 E0.01524 ; perimeter
G1 X185.337 Y99.050 E0.01510 ; perimeter
G1 X185.725 Y99.229 E0.01762 ; perimeter
G1 X186.026 Y99.442 E0.01518 ; perimeter
G1 X185.468 Y99.910 E0.02998 ; perimeter
G1 X185.235 Y99.768 E0.01125 ; perimeter
G1 X184.799 Y99.613 E0.01909 ; perimeter
G1 X184.337 Y99.546 E0.01923 ; perimeter
G1 X183.930 Y99.555 E0.01676 ; perimeter
G1 X183.458 Y99.643 E0.01977 ; perimeter
G1 X183.001 Y99.811 E0.02007 ; perimeter
G1 X182.673 Y99.984 E0.01529 ; perimeter
G1 X182.440 Y100.140 E0.01154 ; perimeter
G1 X167.976 Y112.267 E0.77758 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X147.567 Y119.580 E0.27012 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.110 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X147.110 Y117.322 E0.10936 ; perimeter
G1 X152.660 Y117.322 E0.22864 ; perimeter
G1 X152.660 Y118.648 E0.05465 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X181.697 Y99.537 E0.75612 ; perimeter
G1 X182.053 Y99.267 E0.01840 ; perimeter
G1 X182.630 Y98.927 E0.02760 ; perimeter
G1 X183.219 Y98.690 E0.02617 ; perimeter
G1 X183.640 Y98.576 E0.01793 ; perimeter
G1 X184.075 Y98.511 E0.01814 ; perimeter
G1 X184.642 Y98.504 E0.02335 ; perimeter
G1 X185.065 Y98.561 E0.01760 ; perimeter
G1 X185.475 Y98.677 E0.01754 ; perimeter
G1 X185.925 Y98.885 E0.02042 ; perimeter
G1 X186.308 Y99.157 E0.01935 ; perimeter
G1 X186.613 Y99.467 E0.01793 ; perimeter
G1 X185.481 Y100.417 E0.06091 ; perimeter
G1 X185.380 Y100.321 E0.00572 ; perimeter
G1 X185.064 Y100.127 E0.01530 ; perimeter
G1 X184.703 Y99.999 E0.01575 ; perimeter
G1 X184.312 Y99.943 E0.01627 ; perimeter
G1 X183.971 Y99.950 E0.01408 ; perimeter
G1 X183.564 Y100.027 E0.01707 ; perimeter
G1 X183.162 Y100.174 E0.01761 ; perimeter
G1 X182.876 Y100.325 E0.01333 ; perimeter
G1 X182.678 Y100.457 E0.00981 ; perimeter
G1 X168.120 Y112.663 E0.78264 ; perimeter
G1 X162.983 Y112.663 E0.21163 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X147.170 Y119.976 E0.29239 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.258 Y119.605 F10800.000 ; move inwards before travel
G1 F8640
G1 X147.110 Y117.322 E-0.61310 ; wipe and retract
G1 X147.746 Y117.322 E-0.14690 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X148.972 Y118.230 ; move to first infill point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7643.67
G1 X148.334 Y118.868 E0.04417 ; infill
G1 X149.000 Y118.868 E0.03261 ; infill
G1 X149.438 Y118.431 E0.03026 ; infill
G1 X150.104 Y118.431 E0.03261 ; infill
G1 X149.667 Y118.868 E0.03026 ; infill
G1 X150.333 Y118.868 E0.03261 ; infill
G1 X150.770 Y118.431 E0.03026 ; infill
G1 X151.436 Y118.431 E0.03261 ; infill
G1 X150.798 Y119.069 E0.04417 ; infill
G1 F8640
G1 X151.436 Y118.431 E-0.20834 ; wipe and retract
G1 X150.770 Y118.431 E-0.15380 ; wipe and retract
G1 X150.333 Y118.868 E-0.14275 ; wipe and retract
G1 X149.667 Y118.868 E-0.15380 ; wipe and retract
G1 X149.977 Y118.557 E-0.10132 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X190.378 Y111.042 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X190.034 Y110.632 E0.02205 ; perimeter
G1 X192.714 Y108.384 E0.14409 ; perimeter
G1 X189.303 Y104.319 E0.21861 ; perimeter
G1 X186.623 Y106.567 E0.14409 ; perimeter
G1 X186.279 Y106.157 E0.02205 ; perimeter
G1 X188.958 Y103.909 E0.14409 ; perimeter
G1 X186.509 Y100.990 E0.15696 ; perimeter
G1 X187.017 Y100.564 E0.02729 ; perimeter
G1 X196.014 Y111.287 E0.57663 ; perimeter
G1 X195.507 Y111.713 E0.02729 ; perimeter
G1 X193.058 Y108.794 E0.15696 ; perimeter
M73 P48 R70
G1 X190.424 Y111.004 E0.14161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.330 Y111.601 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X189.476 Y110.584 E0.05471 ; perimeter
G1 X192.155 Y108.335 E0.14409 ; perimeter
G1 X189.254 Y104.877 E0.18596 ; perimeter
G1 X186.574 Y107.126 E0.14409 ; perimeter
G1 X185.721 Y106.108 E0.05471 ; perimeter
G1 X188.400 Y103.860 E0.14409 ; perimeter
G1 X185.951 Y100.941 E0.15696 ; perimeter
G1 X187.066 Y100.006 E0.05995 ; perimeter
G1 X196.573 Y111.336 E0.60929 ; perimeter
G1 X195.458 Y112.271 E0.05995 ; perimeter
G1 X193.009 Y109.353 E0.15696 ; perimeter
G1 X190.375 Y111.562 E0.14161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.370 Y111.203 F10800.000 ; move inwards before travel
G1 F8640
G1 X189.476 Y110.584 E-0.30695 ; wipe and retract
G1 X190.979 Y109.322 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X165.460 Y139.814 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y138.745 E0.04404 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y139.814 E0.04404 ; perimeter
G1 X165.520 Y139.814 E0.17527 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y138.745 E-0.24726 ; wipe and retract
G1 X167.681 Y138.745 E-0.51274 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X143.050 Y138.884 ; move to first perimeter point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X143.048 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E1.17719 ; perimeter
G1 X196.630 Y117.366 E1.34476 ; perimeter
G1 X196.890 Y117.120 E0.01473 ; perimeter
G1 X197.259 Y116.650 E0.02462 ; perimeter
G1 X197.468 Y116.266 E0.01801 ; perimeter
G1 X197.619 Y115.854 E0.01808 ; perimeter
G1 X197.706 Y115.347 E0.02121 ; perimeter
G1 X197.705 Y114.943 E0.01662 ; perimeter
G1 X197.631 Y114.538 E0.01697 ; perimeter
G1 X197.466 Y114.118 E0.01858 ; perimeter
G1 X197.234 Y113.771 E0.01718 ; perimeter
G1 X196.469 Y112.859 E0.04904 ; perimeter
G1 X196.976 Y112.434 E0.02729 ; perimeter
G1 X197.864 Y113.491 E0.05689 ; perimeter
G1 X198.101 Y113.835 E0.01719 ; perimeter
G1 X198.269 Y114.221 E0.01736 ; perimeter
G1 X198.344 Y114.493 E0.01160 ; perimeter
G1 X198.387 Y114.841 E0.01446 ; perimeter
G1 X198.362 Y115.421 E0.02392 ; perimeter
G1 X198.285 Y115.799 E0.01588 ; perimeter
G1 X198.160 Y116.173 E0.01626 ; perimeter
G1 X197.991 Y116.534 E0.01643 ; perimeter
G1 X197.866 Y116.750 E0.01028 ; perimeter
G1 X197.627 Y117.098 E0.01738 ; perimeter
G1 X197.367 Y117.405 E0.01657 ; perimeter
G1 X196.980 Y117.771 E0.02195 ; perimeter
G1 X171.819 Y138.884 E1.35310 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.211 E0.05465 ; perimeter
G1 X165.064 Y140.211 E0.21040 ; perimeter
G1 X165.064 Y138.884 E0.05465 ; perimeter
G1 X143.110 Y138.884 E0.90440 ; perimeter
M204 S1000 ; adjust acceleration
G1 X142.655 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X142.651 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E1.18763 ; perimeter
G1 X196.366 Y117.070 E1.33833 ; perimeter
G1 X196.596 Y116.852 E0.01305 ; perimeter
G1 X196.927 Y116.432 E0.02205 ; perimeter
G1 X197.106 Y116.103 E0.01542 ; perimeter
G1 X197.234 Y115.752 E0.01540 ; perimeter
G1 X197.309 Y115.313 E0.01832 ; perimeter
G1 X197.309 Y114.979 E0.01376 ; perimeter
G1 X197.248 Y114.647 E0.01392 ; perimeter
G1 X197.113 Y114.303 E0.01523 ; perimeter
G1 X196.916 Y114.010 E0.01453 ; perimeter
G1 X195.910 Y112.811 E0.06448 ; perimeter
G1 X197.025 Y111.875 E0.05995 ; perimeter
G1 X198.180 Y113.251 E0.07400 ; perimeter
G1 X198.449 Y113.642 E0.01953 ; perimeter
G1 X198.644 Y114.088 E0.02007 ; perimeter
G1 X198.734 Y114.415 E0.01396 ; perimeter
G1 X198.785 Y114.825 E0.01703 ; perimeter
G1 X198.757 Y115.469 E0.02656 ; perimeter
G1 X198.669 Y115.902 E0.01817 ; perimeter
G1 X198.528 Y116.320 E0.01820 ; perimeter
G1 X198.342 Y116.718 E0.01808 ; perimeter
G1 X198.201 Y116.962 E0.01161 ; perimeter
G1 X197.943 Y117.339 E0.01883 ; perimeter
G1 X197.655 Y117.678 E0.01831 ; perimeter
G1 X197.244 Y118.067 E0.02333 ; perimeter
G1 X171.963 Y139.280 E1.35953 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X170.516 Y140.607 E0.00301 ; perimeter
G1 X164.719 Y140.607 E0.23879 ; perimeter
G1 X164.667 Y140.555 E0.00301 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X142.715 Y139.280 E0.90435 ; perimeter
M204 S1000 ; adjust acceleration
G1 X142.861 Y138.937 F10800.000 ; move inwards before travel
G1 F8640
G1 X142.651 Y137.952 E-0.30700 ; wipe and retract
G1 X144.613 Y137.952 E-0.45300 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
G1 X166.605 Y138.860 ; move to first infill point
G1 Z10.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q48 S72
G1 F7109.92
G1 X165.967 Y139.498 E0.04749 ; infill
G1 X166.683 Y139.498 E0.03768 ; infill
G1 X167.120 Y139.061 E0.03254 ; infill
G1 X167.836 Y139.061 E0.03768 ; infill
G1 X167.399 Y139.498 E0.03254 ; infill
G1 X168.115 Y139.498 E0.03768 ; infill
G1 X168.552 Y139.061 E0.03254 ; infill
G1 X169.268 Y139.061 E0.03768 ; infill
G1 X168.630 Y139.699 E0.04749 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;10.25


G1 F8640
G1 X169.268 Y139.061 E-0.20834 ; wipe and retract
G1 X168.552 Y139.061 E-0.16534 ; wipe and retract
G1 X168.115 Y139.498 E-0.14275 ; wipe and retract
G1 X167.399 Y139.498 E-0.16534 ; wipe and retract
G1 X167.638 Y139.259 E-0.07822 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;10.25
G1 X84.255 Y101.843 ; move to first perimeter point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.940 Y101.843 E0.17774 ; perimeter
G1 X79.940 Y100.599 E0.05126 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y101.783 E0.04878 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.964 Y101.829 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X106.196 Y100.738 ; move to first perimeter point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.88757 ; perimeter
G1 X84.651 Y102.240 E0.06186 ; perimeter
G1 X79.544 Y102.240 E0.21040 ; perimeter
G1 X79.544 Y100.738 E0.06186 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X52.601 Y79.513 E1.36032 ; perimeter
G1 X52.217 Y79.149 E0.02179 ; perimeter
G1 X51.894 Y78.762 E0.02076 ; perimeter
G1 X51.628 Y78.347 E0.02029 ; perimeter
G1 X51.421 Y77.915 E0.01974 ; perimeter
G1 X51.295 Y77.539 E0.01633 ; perimeter
G1 X51.202 Y77.046 E0.02066 ; perimeter
G1 X51.187 Y76.673 E0.01540 ; perimeter
G1 X51.236 Y76.236 E0.01811 ; perimeter
G1 X51.331 Y75.897 E0.01450 ; perimeter
G1 X51.501 Y75.538 E0.01639 ; perimeter
G1 X51.714 Y75.235 E0.01524 ; perimeter
G1 X52.604 Y74.175 E0.05704 ; perimeter
G1 X53.112 Y74.601 E0.02730 ; perimeter
G1 X52.347 Y75.512 E0.04903 ; perimeter
G1 X52.117 Y75.856 E0.01705 ; perimeter
G1 X51.951 Y76.273 E0.01846 ; perimeter
G1 X51.875 Y76.690 E0.01747 ; perimeter
G1 X51.876 Y77.107 E0.01716 ; perimeter
G1 X51.962 Y77.595 E0.02043 ; perimeter
G1 X52.114 Y78.011 E0.01826 ; perimeter
G1 X52.326 Y78.399 E0.01821 ; perimeter
G1 X52.680 Y78.850 E0.02362 ; perimeter
G1 X52.950 Y79.107 E0.01535 ; perimeter
G1 X78.091 Y100.203 E1.35200 ; perimeter
G1 X106.196 Y100.203 E1.15782 ; perimeter
G1 X106.196 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X106.593 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.88757 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.821 Y102.636 E0.01321 ; perimeter
G1 X79.374 Y102.636 E0.22437 ; perimeter
G1 X79.147 Y102.409 E0.01321 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X52.337 Y79.809 E1.36674 ; perimeter
G1 X51.927 Y79.421 E0.02325 ; perimeter
G1 X51.574 Y78.996 E0.02274 ; perimeter
G1 X51.281 Y78.541 E0.02231 ; perimeter
G1 X51.053 Y78.064 E0.02177 ; perimeter
G1 X50.911 Y77.639 E0.01845 ; perimeter
G1 X50.807 Y77.092 E0.02297 ; perimeter
G1 X50.790 Y76.659 E0.01785 ; perimeter
G1 X50.846 Y76.160 E0.02068 ; perimeter
G1 X50.958 Y75.758 E0.01720 ; perimeter
G1 X51.158 Y75.337 E0.01918 ; perimeter
G1 X51.400 Y74.993 E0.01733 ; perimeter
G1 X52.556 Y73.616 E0.07405 ; perimeter
G1 X53.670 Y74.552 E0.05995 ; perimeter
G1 X52.664 Y75.751 E0.06448 ; perimeter
G1 X52.469 Y76.042 E0.01442 ; perimeter
G1 X52.334 Y76.383 E0.01510 ; perimeter
G1 X52.272 Y76.726 E0.01437 ; perimeter
G1 X52.272 Y77.072 E0.01425 ; perimeter
G1 X52.346 Y77.492 E0.01758 ; perimeter
G1 X52.476 Y77.847 E0.01559 ; perimeter
G1 X52.658 Y78.180 E0.01563 ; perimeter
G1 X52.974 Y78.583 E0.02108 ; perimeter
G1 X53.214 Y78.811 E0.01366 ; perimeter
G1 X78.235 Y99.806 E1.34555 ; perimeter
G1 X106.592 Y99.806 E1.16820 ; perimeter
G1 X106.593 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X106.193 Y101.128 F10800.000 ; move inwards before travel
G1 F8640
G1 X103.301 Y101.083 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X84.140 Y101.642 ; move to first infill point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7851.45
G1 X83.412 Y100.915 E0.04901 ; infill
G1 X82.764 Y100.915 E0.03090 ; infill
G1 X83.376 Y101.527 E0.04126 ; infill
G1 X82.728 Y101.527 E0.03090 ; infill
G1 X82.116 Y100.915 E0.04126 ; infill
G1 X81.467 Y100.915 E0.03090 ; infill
G1 X82.079 Y101.527 E0.04126 ; infill
G1 X81.431 Y101.527 E0.03090 ; infill
G1 X80.819 Y100.915 E0.04126 ; infill
G1 X80.256 Y100.915 E0.02681 ; infill
G1 X80.256 Y101.001 E0.00410 ; infill
G1 X80.983 Y101.728 E0.04900 ; infill
G1 F8640
G1 X80.256 Y101.001 E-0.23743 ; wipe and retract
G1 X80.256 Y100.915 E-0.01985 ; wipe and retract
G1 X80.819 Y100.915 E-0.12988 ; wipe and retract
G1 X81.431 Y101.527 E-0.19991 ; wipe and retract
G1 X82.079 Y101.527 E-0.14973 ; wipe and retract
G1 X82.008 Y101.456 E-0.02320 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X59.197 Y72.780 ; move to first perimeter point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X56.523 Y70.536 E0.14382 ; perimeter
G1 X54.074 Y73.454 E0.15696 ; perimeter
G1 X53.566 Y73.028 E0.02729 ; perimeter
G1 X62.564 Y62.306 E0.57663 ; perimeter
G1 X63.071 Y62.732 E0.02729 ; perimeter
G1 X60.622 Y65.650 E0.15696 ; perimeter
G1 X63.297 Y67.894 E0.14382 ; perimeter
G1 X62.952 Y68.304 E0.02205 ; perimeter
G1 X60.278 Y66.060 E0.14382 ; perimeter
G1 X56.867 Y70.126 E0.21861 ; perimeter
G1 X59.541 Y72.370 E0.14382 ; perimeter
G1 X59.236 Y72.734 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.246 Y73.338 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X56.572 Y71.094 E0.14382 ; perimeter
G1 X54.123 Y74.013 E0.15696 ; perimeter
G1 X53.008 Y73.077 E0.05995 ; perimeter
G1 X62.515 Y61.747 E0.60929 ; perimeter
G1 X63.630 Y62.683 E0.05995 ; perimeter
G1 X61.181 Y65.601 E0.15696 ; perimeter
G1 X63.855 Y67.845 E0.14382 ; perimeter
G1 X63.001 Y68.863 E0.05471 ; perimeter
G1 X60.327 Y66.619 E0.14382 ; perimeter
G1 X57.426 Y70.077 E0.18596 ; perimeter
G1 X60.100 Y72.321 E0.14382 ; perimeter
G1 X59.285 Y73.292 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.973 Y73.046 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.727 Y71.220 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X101.562 Y81.038 ; move to first perimeter point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.15303 ; perimeter
G1 X97.847 Y79.793 E0.05126 ; perimeter
G1 X101.562 Y79.793 E0.15303 ; perimeter
G1 X101.562 Y80.978 E0.04878 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.958 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.26229 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X67.300 Y62.005 E0.77648 ; perimeter
G1 X67.002 Y61.785 E0.01525 ; perimeter
G1 X66.535 Y61.531 E0.02192 ; perimeter
G1 X66.112 Y61.382 E0.01848 ; perimeter
G1 X65.646 Y61.295 E0.01954 ; perimeter
G1 X65.181 Y61.290 E0.01916 ; perimeter
G1 X64.734 Y61.366 E0.01866 ; perimeter
G1 X64.336 Y61.514 E0.01752 ; perimeter
G1 X64.112 Y61.651 E0.01080 ; perimeter
G1 X63.554 Y61.183 E0.03000 ; perimeter
G1 X63.856 Y60.969 E0.01522 ; perimeter
G1 X64.175 Y60.816 E0.01461 ; perimeter
G1 X64.597 Y60.691 E0.01811 ; perimeter
G1 X64.971 Y60.641 E0.01556 ; perimeter
G1 X65.354 Y60.641 E0.01578 ; perimeter
G1 X65.863 Y60.708 E0.02113 ; perimeter
G1 X66.398 Y60.863 E0.02294 ; perimeter
G1 X66.859 Y61.068 E0.02077 ; perimeter
G1 X67.218 Y61.278 E0.01716 ; perimeter
G1 X67.634 Y61.587 E0.02135 ; perimeter
G1 X81.934 Y73.586 E0.76899 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y79.397 E0.06186 ; perimeter
G1 X101.958 Y79.397 E0.18568 ; perimeter
G1 X101.958 Y81.374 E0.08144 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.355 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.28456 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X67.055 Y62.317 E0.78191 ; perimeter
G1 X66.789 Y62.120 E0.01362 ; perimeter
G1 X66.374 Y61.894 E0.01948 ; perimeter
G1 X66.010 Y61.766 E0.01590 ; perimeter
G1 X65.607 Y61.691 E0.01687 ; perimeter
G1 X65.212 Y61.687 E0.01627 ; perimeter
G1 X64.837 Y61.750 E0.01565 ; perimeter
G1 X64.510 Y61.872 E0.01438 ; perimeter
G1 X64.198 Y62.064 E0.01510 ; perimeter
G1 X64.100 Y62.158 E0.00560 ; perimeter
G1 X62.967 Y61.208 E0.06090 ; perimeter
G1 X63.314 Y60.864 E0.02014 ; perimeter
G1 X63.655 Y60.626 E0.01713 ; perimeter
G1 X64.032 Y60.445 E0.01724 ; perimeter
G1 X64.514 Y60.303 E0.02068 ; perimeter
G1 X64.945 Y60.245 E0.01791 ; perimeter
G1 X65.380 Y60.245 E0.01794 ; perimeter
G1 X65.944 Y60.319 E0.02344 ; perimeter
G1 X66.534 Y60.490 E0.02529 ; perimeter
G1 X67.039 Y60.714 E0.02278 ; perimeter
G1 X67.433 Y60.944 E0.01877 ; perimeter
G1 X67.883 Y61.278 E0.02309 ; perimeter
G1 X82.078 Y73.189 E0.76337 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y79.001 E0.06186 ; perimeter
G1 X102.355 Y79.001 E0.21834 ; perimeter
G1 X102.355 Y81.770 E0.11410 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.960 Y81.765 F10800.000 ; move inwards before travel
G1 F8640
G1 X99.063 Y81.799 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X101.447 Y80.847 ; move to first infill point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7768.55
G1 X100.709 Y80.109 E0.05024 ; infill
G1 X100.054 Y80.109 E0.03157 ; infill
G1 X100.666 Y80.722 E0.04170 ; infill
G1 X100.011 Y80.722 E0.03157 ; infill
G1 X99.398 Y80.109 E0.04170 ; infill
G1 X98.743 Y80.109 E0.03157 ; infill
G1 X99.355 Y80.722 E0.04170 ; infill
G1 X98.700 Y80.722 E0.03157 ; infill
G1 X97.962 Y79.984 E0.05023 ; infill
G1 F8640
G1 X98.700 Y80.722 E-0.24082 ; wipe and retract
G1 X99.355 Y80.722 E-0.15132 ; wipe and retract
G1 X98.743 Y80.109 E-0.19991 ; wipe and retract
G1 X99.398 Y80.109 E-0.15132 ; wipe and retract
G1 X99.449 Y80.160 E-0.01662 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X148.438 Y81.038 ; move to first perimeter point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X148.438 Y79.793 E0.05126 ; perimeter
G1 X152.153 Y79.793 E0.15303 ; perimeter
G1 X152.153 Y81.038 E0.05126 ; perimeter
G1 X148.498 Y81.038 E0.15055 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.042 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X148.042 Y79.397 E0.08391 ; perimeter
G1 X152.549 Y79.397 E0.18568 ; perimeter
G1 X152.549 Y80.899 E0.06186 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X182.363 Y61.589 E0.76886 ; perimeter
G1 X182.700 Y61.334 E0.01741 ; perimeter
G1 X183.224 Y61.026 E0.02501 ; perimeter
G1 X183.754 Y60.811 E0.02357 ; perimeter
G1 X184.137 Y60.707 E0.01636 ; perimeter
G1 X184.531 Y60.648 E0.01641 ; perimeter
G1 X185.033 Y60.642 E0.02066 ; perimeter
G1 X185.406 Y60.692 E0.01552 ; perimeter
G1 X185.764 Y60.794 E0.01533 ; perimeter
G1 X186.145 Y60.971 E0.01733 ; perimeter
G1 X186.445 Y61.183 E0.01515 ; perimeter
G1 X185.888 Y61.651 E0.02999 ; perimeter
G1 X185.664 Y61.514 E0.01080 ; perimeter
G1 X185.262 Y61.365 E0.01769 ; perimeter
G1 X184.776 Y61.288 E0.02027 ; perimeter
G1 X184.353 Y61.296 E0.01744 ; perimeter
G1 X183.885 Y61.383 E0.01959 ; perimeter
G1 X183.431 Y61.547 E0.01989 ; perimeter
G1 X183.088 Y61.728 E0.01597 ; perimeter
G1 X182.855 Y61.885 E0.01157 ; perimeter
G1 X168.261 Y74.121 E0.78457 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X148.102 Y81.434 E0.25982 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.645 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X147.645 Y79.001 E0.11657 ; perimeter
G1 X152.945 Y79.001 E0.21834 ; perimeter
G1 X152.945 Y80.502 E0.06186 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X182.116 Y61.279 E0.76333 ; perimeter
G1 X182.480 Y61.004 E0.01877 ; perimeter
G1 X183.048 Y60.670 E0.02716 ; perimeter
G1 X183.627 Y60.435 E0.02575 ; perimeter
G1 X184.056 Y60.319 E0.01829 ; perimeter
G1 X184.499 Y60.252 E0.01848 ; perimeter
G1 X185.057 Y60.245 E0.02297 ; perimeter
G1 X185.487 Y60.303 E0.01789 ; perimeter
G1 X185.902 Y60.421 E0.01779 ; perimeter
G1 X186.345 Y60.626 E0.02011 ; perimeter
G1 X186.724 Y60.895 E0.01911 ; perimeter
G1 X187.033 Y61.208 E0.01813 ; perimeter
G1 X185.900 Y62.158 E0.06090 ; perimeter
G1 X185.802 Y62.064 E0.00560 ; perimeter
G1 X185.490 Y61.872 E0.01510 ; perimeter
G1 X185.161 Y61.750 E0.01444 ; perimeter
G1 X184.748 Y61.685 E0.01722 ; perimeter
G1 X184.393 Y61.691 E0.01466 ; perimeter
G1 X183.989 Y61.766 E0.01689 ; perimeter
G1 X183.592 Y61.910 E0.01743 ; perimeter
G1 X183.292 Y62.069 E0.01397 ; perimeter
G1 X183.094 Y62.202 E0.00983 ; perimeter
G1 X168.405 Y74.517 E0.78964 ; perimeter
G1 X163.268 Y74.517 E0.21163 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X147.705 Y81.830 E0.28209 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.793 Y81.458 F10800.000 ; move inwards before travel
G1 F8640
G1 X147.645 Y79.001 E-0.65351 ; wipe and retract
G1 X148.107 Y79.001 E-0.10649 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X148.553 Y79.984 ; move to first infill point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7768.55
G1 X149.291 Y80.722 E0.05023 ; infill
G1 X149.946 Y80.722 E0.03157 ; infill
G1 X149.334 Y80.109 E0.04170 ; infill
G1 X149.989 Y80.109 E0.03157 ; infill
G1 X150.601 Y80.722 E0.04170 ; infill
G1 X151.257 Y80.722 E0.03157 ; infill
G1 X150.645 Y80.109 E0.04170 ; infill
G1 X151.300 Y80.109 E0.03157 ; infill
G1 X152.038 Y80.847 E0.05024 ; infill
G1 F8640
G1 X151.300 Y80.109 E-0.24087 ; wipe and retract
G1 X150.645 Y80.109 E-0.15132 ; wipe and retract
G1 X151.257 Y80.722 E-0.19991 ; wipe and retract
G1 X150.601 Y80.722 E-0.15132 ; wipe and retract
G1 X150.551 Y80.671 E-0.01658 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X190.803 Y72.780 ; move to first perimeter point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X190.459 Y72.370 E0.02205 ; perimeter
G1 X193.133 Y70.126 E0.14382 ; perimeter
G1 X189.722 Y66.060 E0.21861 ; perimeter
G1 X187.048 Y68.304 E0.14382 ; perimeter
G1 X186.703 Y67.894 E0.02205 ; perimeter
G1 X189.378 Y65.650 E0.14382 ; perimeter
G1 X186.929 Y62.732 E0.15696 ; perimeter
G1 X187.436 Y62.306 E0.02730 ; perimeter
G1 X196.434 Y73.028 E0.57663 ; perimeter
G1 X195.926 Y73.454 E0.02729 ; perimeter
G1 X193.477 Y70.536 E0.15696 ; perimeter
G1 X190.849 Y72.741 E0.14134 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.754 Y73.338 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X189.900 Y72.321 E0.05471 ; perimeter
G1 X192.574 Y70.077 E0.14382 ; perimeter
G1 X189.673 Y66.619 E0.18596 ; perimeter
G1 X186.999 Y68.863 E0.14382 ; perimeter
G1 X186.145 Y67.845 E0.05471 ; perimeter
G1 X188.819 Y65.601 E0.14382 ; perimeter
G1 X186.370 Y62.683 E0.15696 ; perimeter
G1 X187.485 Y61.747 E0.05995 ; perimeter
G1 X196.992 Y73.077 E0.60929 ; perimeter
G1 X195.877 Y74.013 E0.05995 ; perimeter
G1 X193.428 Y71.094 E0.15696 ; perimeter
G1 X190.800 Y73.299 E0.14134 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.794 Y72.940 F10800.000 ; move inwards before travel
G1 F8640
G1 X189.900 Y72.321 E-0.30695 ; wipe and retract
G1 X191.403 Y71.059 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X165.745 Y101.843 ; move to first perimeter point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y100.599 E0.05126 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y101.843 E0.05126 ; perimeter
G1 X165.805 Y101.843 E0.17527 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y100.599 E-0.28763 ; wipe and retract
G1 X167.791 Y100.599 E-0.47237 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X143.804 Y100.738 ; move to first perimeter point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X143.804 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E1.15782 ; perimeter
G1 X197.050 Y79.107 E1.35200 ; perimeter
G1 X197.320 Y78.850 E0.01535 ; perimeter
G1 X197.674 Y78.399 E0.02362 ; perimeter
G1 X197.886 Y78.011 E0.01821 ; perimeter
G1 X198.038 Y77.595 E0.01826 ; perimeter
G1 X198.124 Y77.107 E0.02043 ; perimeter
G1 X198.125 Y76.690 E0.01716 ; perimeter
G1 X198.049 Y76.273 E0.01747 ; perimeter
G1 X197.883 Y75.856 E0.01846 ; perimeter
G1 X197.653 Y75.512 E0.01705 ; perimeter
G1 X196.888 Y74.601 E0.04903 ; perimeter
G1 X197.396 Y74.175 E0.02729 ; perimeter
G1 X198.284 Y75.233 E0.05691 ; perimeter
G1 X198.521 Y75.577 E0.01722 ; perimeter
G1 X198.668 Y75.895 E0.01442 ; perimeter
G1 X198.764 Y76.236 E0.01461 ; perimeter
G1 X198.813 Y76.667 E0.01788 ; perimeter
G1 X198.784 Y77.145 E0.01973 ; perimeter
G1 X198.706 Y77.536 E0.01641 ; perimeter
G1 X198.578 Y77.917 E0.01656 ; perimeter
G1 X198.404 Y78.286 E0.01680 ; perimeter
G1 X198.108 Y78.759 E0.02298 ; perimeter
G1 X197.783 Y79.149 E0.02092 ; perimeter
G1 X197.399 Y79.513 E0.02179 ; perimeter
G1 X172.104 Y100.738 E1.36031 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.240 E0.06186 ; perimeter
G1 X165.349 Y102.240 E0.21040 ; perimeter
G1 X165.349 Y100.738 E0.06186 ; perimeter
G1 X143.864 Y100.738 E0.88510 ; perimeter
M204 S1000 ; adjust acceleration
G1 X143.407 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X143.408 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E1.16820 ; perimeter
G1 X196.786 Y78.811 E1.34555 ; perimeter
G1 X197.026 Y78.583 E0.01366 ; perimeter
G1 X197.342 Y78.180 E0.02108 ; perimeter
G1 X197.524 Y77.847 E0.01563 ; perimeter
G1 X197.654 Y77.492 E0.01559 ; perimeter
G1 X197.728 Y77.072 E0.01758 ; perimeter
G1 X197.728 Y76.726 E0.01425 ; perimeter
G1 X197.666 Y76.383 E0.01437 ; perimeter
G1 X197.531 Y76.042 E0.01510 ; perimeter
G1 X197.336 Y75.751 E0.01442 ; perimeter
G1 X196.330 Y74.552 E0.06448 ; perimeter
G1 X197.444 Y73.616 E0.05995 ; perimeter
G1 X198.599 Y74.993 E0.07401 ; perimeter
G1 X198.866 Y75.380 E0.01938 ; perimeter
G1 X199.041 Y75.757 E0.01713 ; perimeter
G1 X199.154 Y76.160 E0.01724 ; perimeter
G1 X199.210 Y76.657 E0.02060 ; perimeter
G1 X199.178 Y77.196 E0.02227 ; perimeter
G1 X199.089 Y77.638 E0.01857 ; perimeter
G1 X198.946 Y78.065 E0.01853 ; perimeter
G1 X198.756 Y78.470 E0.01845 ; perimeter
G1 X198.427 Y78.995 E0.02553 ; perimeter
G1 X198.073 Y79.421 E0.02279 ; perimeter
G1 X197.663 Y79.809 E0.02325 ; perimeter
G1 X172.248 Y101.134 E1.36674 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.626 Y102.636 E0.01321 ; perimeter
G1 X165.179 Y102.636 E0.22437 ; perimeter
G1 X164.953 Y102.409 E0.01321 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X143.467 Y101.134 E0.88510 ; perimeter
M204 S1000 ; adjust acceleration
G1 X143.614 Y100.792 F10800.000 ; move inwards before travel
G1 F8640
G1 X143.408 Y99.806 E-0.30695 ; wipe and retract
G1 X145.370 Y99.806 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X166.788 Y101.728 ; move to first infill point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7851.43
G1 X166.061 Y101.001 E0.04900 ; infill
G1 X166.061 Y100.915 E0.00410 ; infill
G1 X166.624 Y100.915 E0.02681 ; infill
G1 X167.236 Y101.527 E0.04126 ; infill
G1 X167.884 Y101.527 E0.03090 ; infill
G1 X167.272 Y100.915 E0.04126 ; infill
G1 X167.921 Y100.915 E0.03090 ; infill
G1 X168.533 Y101.527 E0.04126 ; infill
G1 X169.181 Y101.527 E0.03090 ; infill
G1 X168.569 Y100.915 E0.04126 ; infill
G1 X169.217 Y100.915 E0.03090 ; infill
G1 X169.945 Y101.642 E0.04901 ; infill
G1 F8640
G1 X169.217 Y100.915 E-0.23748 ; wipe and retract
G1 X168.569 Y100.915 E-0.14973 ; wipe and retract
G1 X169.181 Y101.527 E-0.19991 ; wipe and retract
G1 X168.533 Y101.527 E-0.14973 ; wipe and retract
G1 X168.462 Y101.456 E-0.02316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X83.970 Y139.989 ; move to first perimeter point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.655 Y139.989 E0.17774 ; perimeter
G1 X79.655 Y138.745 E0.05126 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y139.929 E0.04878 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.678 Y139.975 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X105.911 Y138.884 ; move to first perimeter point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.88757 ; perimeter
G1 X84.366 Y140.386 E0.06186 ; perimeter
G1 X79.259 Y140.386 E0.21040 ; perimeter
G1 X79.259 Y138.884 E0.06186 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X52.315 Y117.659 E1.36032 ; perimeter
G1 X51.931 Y117.295 E0.02179 ; perimeter
G1 X51.609 Y116.908 E0.02076 ; perimeter
G1 X51.343 Y116.493 E0.02029 ; perimeter
G1 X51.136 Y116.061 E0.01974 ; perimeter
G1 X51.010 Y115.685 E0.01633 ; perimeter
G1 X50.917 Y115.193 E0.02066 ; perimeter
G1 X50.902 Y114.819 E0.01540 ; perimeter
G1 X50.951 Y114.382 E0.01811 ; perimeter
G1 X51.046 Y114.043 E0.01450 ; perimeter
G1 X51.216 Y113.684 E0.01639 ; perimeter
G1 X51.429 Y113.382 E0.01524 ; perimeter
G1 X52.319 Y112.321 E0.05704 ; perimeter
G1 X52.827 Y112.747 E0.02730 ; perimeter
G1 X52.062 Y113.659 E0.04903 ; perimeter
G1 X51.831 Y114.002 E0.01705 ; perimeter
G1 X51.666 Y114.419 E0.01846 ; perimeter
G1 X51.590 Y114.836 E0.01747 ; perimeter
G1 X51.591 Y115.253 E0.01716 ; perimeter
G1 X51.677 Y115.741 E0.02043 ; perimeter
G1 X51.829 Y116.157 E0.01826 ; perimeter
G1 X52.041 Y116.545 E0.01821 ; perimeter
G1 X52.395 Y116.996 E0.02362 ; perimeter
G1 X52.665 Y117.253 E0.01535 ; perimeter
G1 X77.806 Y138.349 E1.35200 ; perimeter
G1 X105.911 Y138.349 E1.15782 ; perimeter
G1 X105.911 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X106.307 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.88757 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.535 Y140.782 E0.01321 ; perimeter
G1 X79.089 Y140.782 E0.22437 ; perimeter
G1 X78.862 Y140.555 E0.01321 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X52.052 Y117.955 E1.36674 ; perimeter
G1 X51.642 Y117.567 E0.02325 ; perimeter
G1 X51.289 Y117.142 E0.02274 ; perimeter
G1 X50.996 Y116.687 E0.02231 ; perimeter
G1 X50.768 Y116.210 E0.02177 ; perimeter
G1 X50.626 Y115.786 E0.01845 ; perimeter
G1 X50.522 Y115.238 E0.02297 ; perimeter
G1 X50.504 Y114.805 E0.01785 ; perimeter
G1 X50.561 Y114.306 E0.02068 ; perimeter
G1 X50.673 Y113.904 E0.01720 ; perimeter
G1 X50.873 Y113.483 E0.01918 ; perimeter
G1 X51.115 Y113.140 E0.01733 ; perimeter
G1 X52.270 Y111.763 E0.07405 ; perimeter
G1 X53.385 Y112.698 E0.05995 ; perimeter
G1 X52.379 Y113.897 E0.06448 ; perimeter
G1 X52.184 Y114.188 E0.01442 ; perimeter
G1 X52.049 Y114.529 E0.01510 ; perimeter
G1 X51.986 Y114.872 E0.01437 ; perimeter
G1 X51.987 Y115.218 E0.01425 ; perimeter
G1 X52.061 Y115.638 E0.01758 ; perimeter
G1 X52.191 Y115.993 E0.01559 ; perimeter
G1 X52.373 Y116.326 E0.01563 ; perimeter
G1 X52.689 Y116.729 E0.02108 ; perimeter
G1 X52.929 Y116.957 E0.01366 ; perimeter
G1 X77.950 Y137.952 E1.34555 ; perimeter
G1 X106.307 Y137.952 E1.16820 ; perimeter
G1 X106.307 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X105.908 Y139.274 F10800.000 ; move inwards before travel
G1 F8640
G1 X103.016 Y139.230 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X83.854 Y139.788 ; move to first infill point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 P48 R69
G1 F7851.45
G1 X83.127 Y139.061 E0.04901 ; infill
G1 X82.479 Y139.061 E0.03090 ; infill
G1 X83.091 Y139.673 E0.04126 ; infill
G1 X82.443 Y139.673 E0.03090 ; infill
G1 X81.830 Y139.061 E0.04126 ; infill
G1 X81.182 Y139.061 E0.03090 ; infill
G1 X81.794 Y139.673 E0.04126 ; infill
G1 X81.146 Y139.673 E0.03090 ; infill
G1 X80.533 Y139.061 E0.04126 ; infill
G1 X79.971 Y139.061 E0.02681 ; infill
G1 X79.971 Y139.147 E0.00410 ; infill
G1 X80.698 Y139.874 E0.04900 ; infill
G1 F8640
G1 X79.971 Y139.147 E-0.23743 ; wipe and retract
G1 X79.971 Y139.061 E-0.01985 ; wipe and retract
G1 X80.533 Y139.061 E-0.12988 ; wipe and retract
G1 X81.146 Y139.673 E-0.19991 ; wipe and retract
G1 X81.794 Y139.673 E-0.14973 ; wipe and retract
G1 X81.723 Y139.602 E-0.02320 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X58.912 Y110.926 ; move to first perimeter point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X56.238 Y108.682 E0.14382 ; perimeter
G1 X53.789 Y111.600 E0.15696 ; perimeter
G1 X53.281 Y111.174 E0.02729 ; perimeter
G1 X62.279 Y100.452 E0.57663 ; perimeter
G1 X62.786 Y100.878 E0.02729 ; perimeter
G1 X60.337 Y103.796 E0.15696 ; perimeter
G1 X63.011 Y106.040 E0.14382 ; perimeter
G1 X62.667 Y106.451 E0.02205 ; perimeter
G1 X59.993 Y104.207 E0.14382 ; perimeter
G1 X56.582 Y108.272 E0.21861 ; perimeter
G1 X59.256 Y110.516 E0.14382 ; perimeter
G1 X58.951 Y110.880 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.961 Y111.484 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X56.287 Y109.240 E0.14382 ; perimeter
G1 X53.838 Y112.159 E0.15696 ; perimeter
G1 X52.723 Y111.223 E0.05995 ; perimeter
G1 X62.230 Y99.894 E0.60929 ; perimeter
G1 X63.345 Y100.829 E0.05995 ; perimeter
G1 X60.895 Y103.748 E0.15696 ; perimeter
G1 X63.570 Y105.992 E0.14382 ; perimeter
G1 X62.716 Y107.009 E0.05471 ; perimeter
G1 X60.042 Y104.765 E0.14382 ; perimeter
G1 X57.140 Y108.223 E0.18596 ; perimeter
G1 X59.815 Y110.467 E0.14382 ; perimeter
G1 X59.000 Y111.438 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.688 Y111.192 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.442 Y109.366 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X101.277 Y119.184 ; move to first perimeter point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.15303 ; perimeter
G1 X97.562 Y117.940 E0.05126 ; perimeter
G1 X101.277 Y117.940 E0.15303 ; perimeter
G1 X101.277 Y119.124 E0.04878 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.673 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.26229 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X67.015 Y100.151 E0.77648 ; perimeter
G1 X66.717 Y99.932 E0.01525 ; perimeter
G1 X66.250 Y99.677 E0.02192 ; perimeter
G1 X65.827 Y99.528 E0.01848 ; perimeter
G1 X65.361 Y99.442 E0.01954 ; perimeter
G1 X64.896 Y99.436 E0.01916 ; perimeter
G1 X64.449 Y99.512 E0.01866 ; perimeter
G1 X64.050 Y99.660 E0.01752 ; perimeter
G1 X63.827 Y99.798 E0.01080 ; perimeter
G1 X63.269 Y99.329 E0.03000 ; perimeter
G1 X63.570 Y99.115 E0.01522 ; perimeter
G1 X63.890 Y98.962 E0.01461 ; perimeter
G1 X64.312 Y98.838 E0.01811 ; perimeter
G1 X64.686 Y98.787 E0.01556 ; perimeter
G1 X65.069 Y98.787 E0.01578 ; perimeter
G1 X65.578 Y98.854 E0.02113 ; perimeter
G1 X66.113 Y99.009 E0.02294 ; perimeter
G1 X66.573 Y99.214 E0.02077 ; perimeter
G1 X66.933 Y99.424 E0.01716 ; perimeter
G1 X67.349 Y99.733 E0.02135 ; perimeter
G1 X81.649 Y111.732 E0.76899 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y117.543 E0.06186 ; perimeter
G1 X101.673 Y117.543 E0.18568 ; perimeter
G1 X101.673 Y119.520 E0.08144 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.069 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.28456 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
M73 Q48 S71
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X66.770 Y100.463 E0.78191 ; perimeter
G1 X66.504 Y100.267 E0.01362 ; perimeter
G1 X66.088 Y100.040 E0.01948 ; perimeter
G1 X65.724 Y99.912 E0.01590 ; perimeter
G1 X65.322 Y99.837 E0.01687 ; perimeter
G1 X64.927 Y99.833 E0.01627 ; perimeter
G1 X64.552 Y99.897 E0.01565 ; perimeter
G1 X64.225 Y100.018 E0.01438 ; perimeter
G1 X63.913 Y100.210 E0.01510 ; perimeter
G1 X63.815 Y100.304 E0.00560 ; perimeter
G1 X62.682 Y99.354 E0.06090 ; perimeter
G1 X63.029 Y99.010 E0.02014 ; perimeter
G1 X63.370 Y98.772 E0.01713 ; perimeter
G1 X63.747 Y98.591 E0.01724 ; perimeter
G1 X64.229 Y98.449 E0.02068 ; perimeter
G1 X64.660 Y98.391 E0.01791 ; perimeter
G1 X65.095 Y98.391 E0.01794 ; perimeter
G1 X65.659 Y98.465 E0.02344 ; perimeter
G1 X66.249 Y98.636 E0.02529 ; perimeter
G1 X66.754 Y98.860 E0.02278 ; perimeter
G1 X67.148 Y99.090 E0.01877 ; perimeter
G1 X67.598 Y99.424 E0.02309 ; perimeter
G1 X81.793 Y111.335 E0.76337 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y117.147 E0.06186 ; perimeter
G1 X102.069 Y117.147 E0.21834 ; perimeter
G1 X102.069 Y119.916 E0.11410 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.675 Y119.911 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.778 Y119.945 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X101.162 Y118.993 ; move to first infill point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7768.55
G1 X100.424 Y118.256 E0.05024 ; infill
G1 X99.769 Y118.256 E0.03157 ; infill
G1 X100.381 Y118.868 E0.04170 ; infill
G1 X99.725 Y118.868 E0.03157 ; infill
G1 X99.113 Y118.256 E0.04170 ; infill
G1 X98.458 Y118.256 E0.03157 ; infill
G1 X99.070 Y118.868 E0.04170 ; infill
G1 X98.415 Y118.868 E0.03157 ; infill
G1 X97.677 Y118.130 E0.05023 ; infill
G1 F8640
G1 X98.415 Y118.868 E-0.24082 ; wipe and retract
G1 X99.070 Y118.868 E-0.15132 ; wipe and retract
G1 X98.458 Y118.256 E-0.19991 ; wipe and retract
G1 X99.113 Y118.256 E-0.15132 ; wipe and retract
G1 X99.164 Y118.306 E-0.01662 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X148.153 Y119.184 ; move to first perimeter point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X148.153 Y117.940 E0.05126 ; perimeter
G1 X151.868 Y117.940 E0.15303 ; perimeter
G1 X151.868 Y119.184 E0.05126 ; perimeter
G1 X148.213 Y119.184 E0.15055 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.757 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X147.757 Y117.543 E0.08391 ; perimeter
G1 X152.264 Y117.543 E0.18568 ; perimeter
G1 X152.264 Y119.045 E0.06186 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X182.078 Y99.735 E0.76886 ; perimeter
G1 X182.415 Y99.480 E0.01741 ; perimeter
G1 X182.939 Y99.172 E0.02501 ; perimeter
G1 X183.469 Y98.957 E0.02357 ; perimeter
G1 X183.852 Y98.853 E0.01636 ; perimeter
G1 X184.246 Y98.794 E0.01641 ; perimeter
G1 X184.747 Y98.788 E0.02066 ; perimeter
G1 X185.121 Y98.838 E0.01552 ; perimeter
G1 X185.479 Y98.940 E0.01533 ; perimeter
G1 X185.860 Y99.117 E0.01733 ; perimeter
G1 X186.160 Y99.330 E0.01515 ; perimeter
G1 X185.602 Y99.798 E0.02999 ; perimeter
G1 X185.379 Y99.660 E0.01080 ; perimeter
G1 X184.977 Y99.511 E0.01769 ; perimeter
G1 X184.491 Y99.434 E0.02027 ; perimeter
G1 X184.067 Y99.442 E0.01744 ; perimeter
G1 X183.600 Y99.529 E0.01959 ; perimeter
G1 X183.146 Y99.693 E0.01989 ; perimeter
G1 X182.803 Y99.874 E0.01597 ; perimeter
G1 X182.570 Y100.031 E0.01157 ; perimeter
G1 X167.976 Y112.267 E0.78457 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X147.817 Y119.580 E0.25982 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.360 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X147.360 Y117.147 E0.11657 ; perimeter
G1 X152.660 Y117.147 E0.21834 ; perimeter
G1 X152.660 Y118.648 E0.06186 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X181.831 Y99.425 E0.76333 ; perimeter
G1 X182.194 Y99.150 E0.01877 ; perimeter
G1 X182.763 Y98.816 E0.02716 ; perimeter
G1 X183.342 Y98.581 E0.02575 ; perimeter
G1 X183.770 Y98.465 E0.01829 ; perimeter
G1 X184.214 Y98.398 E0.01848 ; perimeter
G1 X184.771 Y98.391 E0.02297 ; perimeter
G1 X185.202 Y98.449 E0.01789 ; perimeter
G1 X185.617 Y98.567 E0.01779 ; perimeter
G1 X186.060 Y98.772 E0.02011 ; perimeter
G1 X186.438 Y99.041 E0.01911 ; perimeter
G1 X186.747 Y99.354 E0.01813 ; perimeter
G1 X185.615 Y100.304 E0.06090 ; perimeter
G1 X185.517 Y100.210 E0.00560 ; perimeter
G1 X185.205 Y100.018 E0.01510 ; perimeter
G1 X184.876 Y99.896 E0.01444 ; perimeter
G1 X184.463 Y99.831 E0.01722 ; perimeter
G1 X184.107 Y99.838 E0.01466 ; perimeter
G1 X183.704 Y99.912 E0.01689 ; perimeter
G1 X183.307 Y100.057 E0.01743 ; perimeter
G1 X183.007 Y100.215 E0.01397 ; perimeter
G1 X182.809 Y100.348 E0.00983 ; perimeter
G1 X168.120 Y112.663 E0.78964 ; perimeter
G1 X162.983 Y112.663 E0.21163 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X147.420 Y119.976 E0.28209 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.508 Y119.605 F10800.000 ; move inwards before travel
G1 F8640
G1 X147.360 Y117.147 E-0.65351 ; wipe and retract
G1 X147.821 Y117.147 E-0.10649 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X148.268 Y118.130 ; move to first infill point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7768.55
G1 X149.006 Y118.868 E0.05023 ; infill
G1 X149.661 Y118.868 E0.03157 ; infill
G1 X149.049 Y118.256 E0.04170 ; infill
G1 X149.704 Y118.256 E0.03157 ; infill
G1 X150.316 Y118.868 E0.04170 ; infill
G1 X150.972 Y118.868 E0.03157 ; infill
G1 X150.359 Y118.256 E0.04170 ; infill
G1 X151.015 Y118.256 E0.03157 ; infill
G1 X151.752 Y118.993 E0.05024 ; infill
G1 F8640
G1 X151.015 Y118.256 E-0.24087 ; wipe and retract
G1 X150.359 Y118.256 E-0.15132 ; wipe and retract
G1 X150.972 Y118.868 E-0.19991 ; wipe and retract
G1 X150.316 Y118.868 E-0.15132 ; wipe and retract
G1 X150.265 Y118.817 E-0.01658 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X190.517 Y110.926 ; move to first perimeter point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X190.173 Y110.516 E0.02205 ; perimeter
G1 X192.848 Y108.272 E0.14382 ; perimeter
G1 X189.437 Y104.207 E0.21861 ; perimeter
G1 X186.762 Y106.451 E0.14382 ; perimeter
G1 X186.418 Y106.040 E0.02205 ; perimeter
G1 X189.093 Y103.796 E0.14382 ; perimeter
G1 X186.644 Y100.878 E0.15696 ; perimeter
G1 X187.151 Y100.452 E0.02730 ; perimeter
G1 X196.148 Y111.174 E0.57663 ; perimeter
G1 X195.641 Y111.600 E0.02729 ; perimeter
G1 X193.192 Y108.682 E0.15696 ; perimeter
G1 X190.563 Y110.887 E0.14134 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.469 Y111.484 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X189.615 Y110.467 E0.05471 ; perimeter
G1 X192.289 Y108.223 E0.14382 ; perimeter
G1 X189.388 Y104.765 E0.18596 ; perimeter
G1 X186.713 Y107.009 E0.14382 ; perimeter
G1 X185.860 Y105.992 E0.05471 ; perimeter
G1 X188.534 Y103.748 E0.14382 ; perimeter
G1 X186.085 Y100.829 E0.15696 ; perimeter
G1 X187.200 Y99.894 E0.05995 ; perimeter
G1 X196.707 Y111.223 E0.60929 ; perimeter
G1 X195.592 Y112.159 E0.05995 ; perimeter
G1 X193.143 Y109.240 E0.15696 ; perimeter
G1 X190.515 Y111.446 E0.14134 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.509 Y111.086 F10800.000 ; move inwards before travel
G1 F8640
G1 X189.615 Y110.467 E-0.30695 ; wipe and retract
G1 X191.118 Y109.206 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X165.460 Y139.989 ; move to first perimeter point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y138.745 E0.05126 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y139.989 E0.05126 ; perimeter
G1 X165.520 Y139.989 E0.17527 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y138.745 E-0.28763 ; wipe and retract
G1 X167.506 Y138.745 E-0.47237 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X143.519 Y138.884 ; move to first perimeter point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X143.519 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E1.15782 ; perimeter
G1 X196.765 Y117.253 E1.35200 ; perimeter
G1 X197.035 Y116.996 E0.01535 ; perimeter
G1 X197.389 Y116.545 E0.02362 ; perimeter
G1 X197.601 Y116.157 E0.01821 ; perimeter
G1 X197.753 Y115.741 E0.01826 ; perimeter
G1 X197.839 Y115.253 E0.02043 ; perimeter
G1 X197.840 Y114.836 E0.01716 ; perimeter
G1 X197.763 Y114.419 E0.01747 ; perimeter
G1 X197.598 Y114.002 E0.01846 ; perimeter
G1 X197.368 Y113.659 E0.01705 ; perimeter
G1 X196.603 Y112.747 E0.04903 ; perimeter
G1 X197.110 Y112.321 E0.02729 ; perimeter
G1 X197.998 Y113.379 E0.05691 ; perimeter
G1 X198.236 Y113.723 E0.01722 ; perimeter
G1 X198.383 Y114.041 E0.01442 ; perimeter
G1 X198.479 Y114.382 E0.01461 ; perimeter
G1 X198.527 Y114.813 E0.01788 ; perimeter
G1 X198.499 Y115.292 E0.01973 ; perimeter
G1 X198.420 Y115.682 E0.01641 ; perimeter
G1 X198.293 Y116.063 E0.01656 ; perimeter
G1 X198.119 Y116.432 E0.01680 ; perimeter
G1 X197.823 Y116.905 E0.02298 ; perimeter
G1 X197.498 Y117.295 E0.02092 ; perimeter
G1 X197.114 Y117.659 E0.02179 ; perimeter
G1 X171.819 Y138.884 E1.36031 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.386 E0.06186 ; perimeter
G1 X165.064 Y140.386 E0.21040 ; perimeter
G1 X165.064 Y138.884 E0.06186 ; perimeter
G1 X143.579 Y138.884 E0.88510 ; perimeter
M204 S1000 ; adjust acceleration
G1 X143.122 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X143.122 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E1.16820 ; perimeter
G1 X196.501 Y116.957 E1.34555 ; perimeter
G1 X196.741 Y116.729 E0.01366 ; perimeter
G1 X197.057 Y116.326 E0.02108 ; perimeter
G1 X197.238 Y115.993 E0.01563 ; perimeter
G1 X197.369 Y115.638 E0.01559 ; perimeter
G1 X197.443 Y115.218 E0.01758 ; perimeter
G1 X197.443 Y114.872 E0.01425 ; perimeter
G1 X197.381 Y114.529 E0.01437 ; perimeter
G1 X197.245 Y114.188 E0.01510 ; perimeter
G1 X197.051 Y113.897 E0.01442 ; perimeter
G1 X196.044 Y112.698 E0.06448 ; perimeter
G1 X197.159 Y111.763 E0.05995 ; perimeter
G1 X198.314 Y113.139 E0.07401 ; perimeter
G1 X198.581 Y113.526 E0.01938 ; perimeter
G1 X198.756 Y113.903 E0.01713 ; perimeter
G1 X198.869 Y114.306 E0.01724 ; perimeter
G1 X198.925 Y114.803 E0.02060 ; perimeter
G1 X198.893 Y115.343 E0.02227 ; perimeter
G1 X198.804 Y115.784 E0.01857 ; perimeter
G1 X198.661 Y116.211 E0.01853 ; perimeter
G1 X198.471 Y116.616 E0.01845 ; perimeter
G1 X198.142 Y117.141 E0.02553 ; perimeter
G1 X197.788 Y117.567 E0.02279 ; perimeter
G1 X197.378 Y117.955 E0.02325 ; perimeter
G1 X171.963 Y139.280 E1.36674 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X170.341 Y140.782 E0.01321 ; perimeter
G1 X164.894 Y140.782 E0.22437 ; perimeter
G1 X164.667 Y140.555 E0.01321 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X143.182 Y139.280 E0.88510 ; perimeter
M204 S1000 ; adjust acceleration
G1 X143.329 Y138.938 F10800.000 ; move inwards before travel
G1 F8640
G1 X143.122 Y137.952 E-0.30695 ; wipe and retract
G1 X145.084 Y137.952 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
G1 X166.503 Y139.874 ; move to first infill point
G1 Z10.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7851.43
G1 X165.776 Y139.147 E0.04900 ; infill
G1 X165.776 Y139.061 E0.00410 ; infill
G1 X166.339 Y139.061 E0.02681 ; infill
G1 X166.951 Y139.673 E0.04126 ; infill
G1 X167.599 Y139.673 E0.03090 ; infill
G1 X166.987 Y139.061 E0.04126 ; infill
G1 X167.635 Y139.061 E0.03090 ; infill
G1 X168.248 Y139.673 E0.04126 ; infill
G1 X168.896 Y139.673 E0.03090 ; infill
G1 X168.284 Y139.061 E0.04126 ; infill
G1 X168.932 Y139.061 E0.03090 ; infill
G1 X169.660 Y139.788 E0.04901 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;10.5


G1 F8640
G1 X168.932 Y139.061 E-0.23748 ; wipe and retract
G1 X168.284 Y139.061 E-0.14973 ; wipe and retract
G1 X168.896 Y139.673 E-0.19991 ; wipe and retract
G1 X168.248 Y139.673 E-0.14973 ; wipe and retract
G1 X168.177 Y139.602 E-0.02316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z10.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;10.5
G1 X84.255 Y102.018 ; move to first perimeter point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.940 Y102.018 E0.17774 ; perimeter
G1 X79.940 Y100.599 E0.05847 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y101.958 E0.05600 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.964 Y102.004 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X105.728 Y100.738 ; move to first perimeter point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.86827 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.481 Y102.415 E0.00988 ; perimeter
G1 X79.713 Y102.415 E0.19642 ; perimeter
G1 X79.544 Y102.245 E0.00989 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X52.467 Y79.400 E1.36753 ; perimeter
G1 X52.083 Y79.037 E0.02175 ; perimeter
G1 X51.761 Y78.650 E0.02073 ; perimeter
G1 X51.495 Y78.237 E0.02026 ; perimeter
G1 X51.289 Y77.806 E0.01970 ; perimeter
G1 X51.160 Y77.422 E0.01667 ; perimeter
G1 X51.068 Y76.938 E0.02027 ; perimeter
G1 X51.053 Y76.558 E0.01570 ; perimeter
G1 X51.101 Y76.128 E0.01781 ; perimeter
G1 X51.197 Y75.783 E0.01475 ; perimeter
G1 X51.365 Y75.429 E0.01614 ; perimeter
G1 X51.581 Y75.123 E0.01543 ; perimeter
G1 X52.470 Y74.062 E0.05703 ; perimeter
G1 X52.978 Y74.488 E0.02729 ; perimeter
G1 X52.213 Y75.399 E0.04900 ; perimeter
G1 X51.985 Y75.738 E0.01682 ; perimeter
G1 X51.819 Y76.154 E0.01845 ; perimeter
G1 X51.740 Y76.583 E0.01797 ; perimeter
G1 X51.743 Y77.013 E0.01770 ; perimeter
G1 X51.828 Y77.482 E0.01966 ; perimeter
G1 X51.982 Y77.902 E0.01840 ; perimeter
G1 X52.182 Y78.268 E0.01719 ; perimeter
G1 X52.533 Y78.724 E0.02374 ; perimeter
G1 X52.815 Y78.994 E0.01608 ; perimeter
G1 X78.091 Y100.203 E1.35925 ; perimeter
G1 X105.726 Y100.203 E1.13844 ; perimeter
G1 X105.728 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X106.125 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.86832 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.646 Y102.811 E0.02341 ; perimeter
G1 X79.549 Y102.811 E0.20995 ; perimeter
G1 X79.147 Y102.409 E0.02341 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X52.203 Y79.696 E1.37396 ; perimeter
G1 X51.793 Y79.309 E0.02321 ; perimeter
G1 X51.441 Y78.885 E0.02270 ; perimeter
G1 X51.148 Y78.431 E0.02227 ; perimeter
G1 X50.920 Y77.955 E0.02173 ; perimeter
G1 X50.776 Y77.522 E0.01879 ; perimeter
G1 X50.674 Y76.984 E0.02258 ; perimeter
G1 X50.655 Y76.543 E0.01815 ; perimeter
G1 X50.711 Y76.052 E0.02037 ; perimeter
G1 X50.825 Y75.644 E0.01745 ; perimeter
G1 X51.021 Y75.229 E0.01893 ; perimeter
G1 X51.266 Y74.881 E0.01752 ; perimeter
G1 X52.421 Y73.504 E0.07405 ; perimeter
G1 X53.536 Y74.439 E0.05995 ; perimeter
G1 X52.530 Y75.638 E0.06447 ; perimeter
G1 X52.338 Y75.924 E0.01422 ; perimeter
G1 X52.202 Y76.264 E0.01508 ; perimeter
G1 X52.137 Y76.618 E0.01481 ; perimeter
G1 X52.139 Y76.976 E0.01475 ; perimeter
G1 X52.212 Y77.378 E0.01683 ; perimeter
G1 X52.344 Y77.737 E0.01577 ; perimeter
G1 X52.515 Y78.050 E0.01469 ; perimeter
G1 X52.829 Y78.459 E0.02122 ; perimeter
G1 X53.080 Y78.699 E0.01431 ; perimeter
G1 X78.235 Y99.806 E1.35277 ; perimeter
G1 X106.121 Y99.806 E1.14877 ; perimeter
G1 X106.125 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X105.725 Y101.128 F10800.000 ; move inwards before travel
G1 F8640
G1 X102.834 Y101.084 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X83.179 Y101.903 ; move to first infill point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7595.14
G1 X83.939 Y101.143 E0.05295 ; infill
G1 X83.939 Y100.915 E0.01124 ; infill
G1 X83.496 Y100.915 E0.02179 ; infill
G1 X82.709 Y101.702 E0.05485 ; infill
G1 X82.039 Y101.702 E0.03302 ; infill
G1 X82.826 Y100.915 E0.05485 ; infill
G1 X82.156 Y100.915 E0.03302 ; infill
G1 X81.369 Y101.702 E0.05485 ; infill
G1 X80.698 Y101.702 E0.03302 ; infill
G1 X81.486 Y100.915 E0.05485 ; infill
G1 X80.815 Y100.915 E0.03302 ; infill
G1 X80.055 Y101.675 E0.05294 ; infill
G1 F8640
G1 X80.815 Y100.915 E-0.24815 ; wipe and retract
G1 X81.486 Y100.915 E-0.15478 ; wipe and retract
G1 X80.698 Y101.702 E-0.25708 ; wipe and retract
G1 X81.131 Y101.702 E-0.10000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X59.058 Y72.663 ; move to first perimeter point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X56.389 Y70.423 E0.14354 ; perimeter
G1 X53.940 Y73.342 E0.15696 ; perimeter
G1 X53.432 Y72.916 E0.02729 ; perimeter
G1 X62.430 Y62.193 E0.57663 ; perimeter
G1 X62.937 Y62.619 E0.02729 ; perimeter
G1 X60.488 Y65.538 E0.15696 ; perimeter
G1 X63.157 Y67.778 E0.14354 ; perimeter
G1 X62.813 Y68.188 E0.02205 ; perimeter
G1 X60.144 Y65.948 E0.14354 ; perimeter
G1 X56.733 Y70.013 E0.21861 ; perimeter
G1 X59.402 Y72.253 E0.14354 ; perimeter
G1 X59.097 Y72.617 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X59.107 Y73.221 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X56.438 Y70.981 E0.14354 ; perimeter
G1 X53.989 Y73.900 E0.15696 ; perimeter
G1 X52.874 Y72.965 E0.05995 ; perimeter
G1 X62.381 Y61.635 E0.60929 ; perimeter
G1 X63.496 Y62.570 E0.05995 ; perimeter
G1 X61.047 Y65.489 E0.15696 ; perimeter
G1 X63.716 Y67.729 E0.14354 ; perimeter
G1 X62.862 Y68.746 E0.05471 ; perimeter
G1 X60.193 Y66.506 E0.14354 ; perimeter
G1 X57.291 Y69.964 E0.18596 ; perimeter
G1 X59.961 Y72.204 E0.14354 ; perimeter
G1 X59.146 Y73.175 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.834 Y72.929 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.588 Y71.103 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X101.312 Y81.038 ; move to first perimeter point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.14273 ; perimeter
G1 X97.847 Y79.618 E0.05847 ; perimeter
G1 X101.312 Y79.618 E0.14273 ; perimeter
G1 X101.312 Y80.978 E0.05600 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.708 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.25199 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X67.165 Y61.892 E0.78372 ; perimeter
G1 X66.854 Y61.664 E0.01590 ; perimeter
G1 X66.399 Y61.417 E0.02134 ; perimeter
G1 X65.971 Y61.268 E0.01867 ; perimeter
G1 X65.509 Y61.183 E0.01935 ; perimeter
G1 X65.049 Y61.177 E0.01896 ; perimeter
G1 X64.605 Y61.252 E0.01855 ; perimeter
G1 X64.195 Y61.404 E0.01799 ; perimeter
G1 X63.978 Y61.539 E0.01054 ; perimeter
G1 X63.420 Y61.070 E0.03002 ; perimeter
G1 X63.721 Y60.857 E0.01519 ; perimeter
G1 X64.045 Y60.702 E0.01483 ; perimeter
G1 X64.460 Y60.579 E0.01781 ; perimeter
G1 X64.841 Y60.528 E0.01584 ; perimeter
G1 X65.229 Y60.529 E0.01597 ; perimeter
G1 X65.789 Y60.609 E0.02330 ; perimeter
G1 X66.331 Y60.778 E0.02340 ; perimeter
G1 X66.643 Y60.913 E0.01402 ; perimeter
G1 X67.002 Y61.115 E0.01696 ; perimeter
G1 X67.508 Y61.481 E0.02570 ; perimeter
G1 X81.934 Y73.586 E0.77580 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y79.222 E0.06907 ; perimeter
G1 X101.708 Y79.222 E0.17538 ; perimeter
G1 X101.708 Y81.374 E0.08865 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.105 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.27426 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X66.921 Y62.204 E0.78913 ; perimeter
G1 X66.642 Y61.999 E0.01424 ; perimeter
G1 X66.238 Y61.781 E0.01891 ; perimeter
G1 X65.869 Y61.652 E0.01610 ; perimeter
G1 X65.471 Y61.579 E0.01669 ; perimeter
G1 X65.080 Y61.574 E0.01610 ; perimeter
G1 X64.708 Y61.637 E0.01554 ; perimeter
G1 X64.371 Y61.762 E0.01482 ; perimeter
G1 X64.062 Y61.953 E0.01498 ; perimeter
G1 X63.966 Y62.046 E0.00548 ; perimeter
G1 X62.833 Y61.096 E0.06089 ; perimeter
G1 X63.175 Y60.755 E0.01989 ; perimeter
G1 X63.520 Y60.514 E0.01733 ; perimeter
G1 X63.903 Y60.330 E0.01748 ; perimeter
G1 X64.377 Y60.191 E0.02037 ; perimeter
G1 X64.815 Y60.132 E0.01820 ; perimeter
G1 X65.257 Y60.133 E0.01822 ; perimeter
G1 X65.876 Y60.221 E0.02576 ; perimeter
G1 X66.469 Y60.406 E0.02558 ; perimeter
G1 X66.819 Y60.557 E0.01572 ; perimeter
G1 X67.216 Y60.780 E0.01875 ; perimeter
G1 X67.752 Y61.168 E0.02723 ; perimeter
G1 X82.078 Y73.189 E0.77044 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y78.826 E0.06907 ; perimeter
G1 X102.105 Y78.826 E0.20804 ; perimeter
G1 X102.105 Y81.770 E0.12131 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.711 Y81.759 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.813 Y81.800 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X100.274 Y80.922 ; move to first infill point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7897.58
G1 X100.996 Y80.201 E0.04835 ; infill
G1 X100.996 Y79.934 E0.01263 ; infill
G1 X100.618 Y79.934 E0.01791 ; infill
G1 X99.831 Y80.722 E0.05275 ; infill
G1 X99.186 Y80.722 E0.03054 ; infill
G1 X99.973 Y79.934 E0.05275 ; infill
G1 X99.329 Y79.934 E0.03054 ; infill
G1 X98.541 Y80.722 E0.05275 ; infill
G1 X98.163 Y80.722 E0.01791 ; infill
G1 X98.163 Y80.455 E0.01264 ; infill
G1 X98.885 Y79.733 E0.04834 ; infill
G1 F8640
G1 X98.163 Y80.455 E-0.23558 ; wipe and retract
G1 X98.163 Y80.722 E-0.06158 ; wipe and retract
G1 X98.541 Y80.722 E-0.08727 ; wipe and retract
G1 X99.329 Y79.934 E-0.25708 ; wipe and retract
G1 X99.842 Y79.934 E-0.11850 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
M73 P49 R68
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X148.688 Y81.038 ; move to first perimeter point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X148.688 Y79.618 E0.05847 ; perimeter
G1 X152.153 Y79.618 E0.14273 ; perimeter
G1 X152.153 Y81.038 E0.05847 ; perimeter
G1 X148.748 Y81.038 E0.14026 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.292 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X148.292 Y79.222 E0.09112 ; perimeter
G1 X152.549 Y79.222 E0.17538 ; perimeter
G1 X152.549 Y80.899 E0.06907 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X182.497 Y61.476 E0.77606 ; perimeter
G1 X182.842 Y61.216 E0.01778 ; perimeter
G1 X183.356 Y60.914 E0.02460 ; perimeter
G1 X183.877 Y60.702 E0.02317 ; perimeter
G1 X184.268 Y60.595 E0.01670 ; perimeter
G1 X184.670 Y60.535 E0.01674 ; perimeter
G1 X185.162 Y60.529 E0.02027 ; perimeter
G1 X185.542 Y60.580 E0.01580 ; perimeter
G1 X185.906 Y60.684 E0.01556 ; perimeter
G1 X186.280 Y60.858 E0.01703 ; perimeter
G1 X186.580 Y61.071 E0.01512 ; perimeter
G1 X186.022 Y61.539 E0.03001 ; perimeter
G1 X185.805 Y61.404 E0.01053 ; perimeter
G1 X185.393 Y61.251 E0.01810 ; perimeter
G1 X184.926 Y61.176 E0.01946 ; perimeter
G1 X184.490 Y61.183 E0.01798 ; perimeter
G1 X184.027 Y61.268 E0.01940 ; perimeter
G1 X183.576 Y61.429 E0.01972 ; perimeter
G1 X183.218 Y61.618 E0.01666 ; perimeter
G1 X182.985 Y61.775 E0.01160 ; perimeter
G1 X168.261 Y74.121 E0.79156 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X148.352 Y81.434 E0.24952 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.895 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X147.895 Y78.826 E0.12378 ; perimeter
G1 X152.945 Y78.826 E0.20804 ; perimeter
G1 X152.945 Y80.502 E0.06907 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X182.250 Y61.166 E0.77053 ; perimeter
G1 X182.621 Y60.886 E0.01915 ; perimeter
G1 X183.181 Y60.558 E0.02673 ; perimeter
G1 X183.750 Y60.326 E0.02532 ; perimeter
G1 X184.186 Y60.207 E0.01865 ; perimeter
G1 X184.638 Y60.139 E0.01882 ; perimeter
G1 X185.186 Y60.132 E0.02258 ; perimeter
G1 X185.624 Y60.191 E0.01818 ; perimeter
G1 X186.045 Y60.311 E0.01804 ; perimeter
G1 X186.480 Y60.514 E0.01979 ; perimeter
G1 X186.854 Y60.779 E0.01888 ; perimeter
G1 X187.167 Y61.096 E0.01832 ; perimeter
G1 X186.035 Y62.046 E0.06088 ; perimeter
G1 X185.940 Y61.955 E0.00539 ; perimeter
G1 X185.629 Y61.762 E0.01507 ; perimeter
G1 X185.291 Y61.636 E0.01486 ; perimeter
G1 X184.898 Y61.573 E0.01642 ; perimeter
G1 X184.529 Y61.579 E0.01519 ; perimeter
G1 X184.130 Y61.652 E0.01671 ; perimeter
G1 X183.736 Y61.793 E0.01725 ; perimeter
G1 X183.422 Y61.958 E0.01461 ; perimeter
G1 X183.224 Y62.092 E0.00986 ; perimeter
G1 X168.405 Y74.517 E0.79665 ; perimeter
G1 X163.268 Y74.517 E0.21163 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X147.955 Y81.830 E0.27179 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.042 Y81.458 F10800.000 ; move inwards before travel
G1 F8640
G1 X147.895 Y78.826 E-0.69392 ; wipe and retract
G1 X148.182 Y78.826 E-0.06608 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X149.726 Y79.733 ; move to first infill point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q49 S70
G1 F7897.58
G1 X149.004 Y80.455 E0.04834 ; infill
G1 X149.004 Y80.722 E0.01264 ; infill
G1 X149.382 Y80.722 E0.01791 ; infill
G1 X150.169 Y79.934 E0.05275 ; infill
G1 X150.814 Y79.934 E0.03054 ; infill
G1 X150.027 Y80.722 E0.05275 ; infill
G1 X150.671 Y80.722 E0.03054 ; infill
G1 X151.459 Y79.934 E0.05275 ; infill
G1 X151.837 Y79.934 E0.01791 ; infill
G1 X151.837 Y80.201 E0.01263 ; infill
G1 X151.115 Y80.922 E0.04835 ; infill
G1 F8640
G1 X151.837 Y80.201 E-0.23562 ; wipe and retract
G1 X151.837 Y79.934 E-0.06155 ; wipe and retract
G1 X151.459 Y79.934 E-0.08730 ; wipe and retract
G1 X150.671 Y80.722 E-0.25707 ; wipe and retract
G1 X150.158 Y80.722 E-0.11845 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X190.942 Y72.663 ; move to first perimeter point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X190.598 Y72.253 E0.02205 ; perimeter
G1 X193.267 Y70.013 E0.14354 ; perimeter
G1 X189.856 Y65.948 E0.21861 ; perimeter
G1 X187.187 Y68.188 E0.14354 ; perimeter
G1 X186.843 Y67.778 E0.02205 ; perimeter
G1 X189.512 Y65.538 E0.14354 ; perimeter
G1 X187.063 Y62.619 E0.15696 ; perimeter
G1 X187.570 Y62.193 E0.02729 ; perimeter
G1 X196.568 Y72.916 E0.57663 ; perimeter
G1 X196.060 Y73.342 E0.02729 ; perimeter
G1 X193.611 Y70.423 E0.15696 ; perimeter
G1 X190.988 Y72.624 E0.14107 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.893 Y73.221 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X190.039 Y72.204 E0.05471 ; perimeter
G1 X192.709 Y69.964 E0.14354 ; perimeter
G1 X189.807 Y66.506 E0.18596 ; perimeter
G1 X187.138 Y68.746 E0.14354 ; perimeter
G1 X186.284 Y67.729 E0.05471 ; perimeter
G1 X188.953 Y65.489 E0.14354 ; perimeter
G1 X186.504 Y62.570 E0.15696 ; perimeter
G1 X187.619 Y61.635 E0.05995 ; perimeter
G1 X197.126 Y72.965 E0.60929 ; perimeter
G1 X196.011 Y73.900 E0.05995 ; perimeter
G1 X193.562 Y70.981 E0.15696 ; perimeter
G1 X190.939 Y73.183 E0.14107 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.934 Y72.823 F10800.000 ; move inwards before travel
G1 F8640
G1 X190.039 Y72.204 E-0.30695 ; wipe and retract
G1 X191.542 Y70.943 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X165.745 Y102.018 ; move to first perimeter point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y100.599 E0.05847 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.018 E0.05847 ; perimeter
G1 X165.805 Y102.018 E0.17527 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y100.599 E-0.32800 ; wipe and retract
G1 X167.616 Y100.599 E-0.43200 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X144.272 Y100.738 ; move to first perimeter point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X144.274 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E1.13844 ; perimeter
G1 X197.185 Y78.994 E1.35924 ; perimeter
G1 X197.467 Y78.724 E0.01608 ; perimeter
G1 X197.818 Y78.268 E0.02374 ; perimeter
G1 X198.018 Y77.902 E0.01719 ; perimeter
G1 X198.172 Y77.482 E0.01840 ; perimeter
G1 X198.257 Y77.013 E0.01966 ; perimeter
G1 X198.260 Y76.583 E0.01770 ; perimeter
G1 X198.181 Y76.154 E0.01797 ; perimeter
G1 X198.016 Y75.740 E0.01834 ; perimeter
G1 X197.787 Y75.400 E0.01691 ; perimeter
G1 X197.022 Y74.488 E0.04902 ; perimeter
G1 X197.530 Y74.062 E0.02729 ; perimeter
G1 X198.418 Y75.121 E0.05693 ; perimeter
G1 X198.653 Y75.460 E0.01698 ; perimeter
G1 X198.802 Y75.781 E0.01461 ; perimeter
G1 X198.899 Y76.128 E0.01483 ; perimeter
G1 X198.947 Y76.553 E0.01760 ; perimeter
G1 X198.920 Y77.022 E0.01935 ; perimeter
G1 X198.841 Y77.419 E0.01670 ; perimeter
G1 X198.711 Y77.807 E0.01686 ; perimeter
G1 X198.533 Y78.184 E0.01716 ; perimeter
G1 X198.241 Y78.648 E0.02259 ; perimeter
G1 X197.917 Y79.037 E0.02086 ; perimeter
G1 X197.533 Y79.400 E0.02175 ; perimeter
G1 X172.104 Y100.738 E1.36753 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.287 Y102.415 E0.00989 ; perimeter
G1 X165.519 Y102.415 E0.19642 ; perimeter
G1 X165.349 Y102.245 E0.00989 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X144.332 Y100.738 E0.86579 ; perimeter
M204 S1000 ; adjust acceleration
G1 X143.875 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X143.879 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E1.14877 ; perimeter
G1 X196.920 Y78.699 E1.35277 ; perimeter
G1 X197.171 Y78.459 E0.01431 ; perimeter
G1 X197.485 Y78.050 E0.02122 ; perimeter
G1 X197.656 Y77.737 E0.01469 ; perimeter
G1 X197.788 Y77.378 E0.01577 ; perimeter
G1 X197.861 Y76.976 E0.01683 ; perimeter
G1 X197.863 Y76.618 E0.01475 ; perimeter
G1 X197.798 Y76.264 E0.01481 ; perimeter
G1 X197.663 Y75.927 E0.01498 ; perimeter
G1 X197.470 Y75.638 E0.01431 ; perimeter
G1 X196.464 Y74.439 E0.06447 ; perimeter
G1 X197.579 Y73.504 E0.05995 ; perimeter
G1 X198.733 Y74.880 E0.07401 ; perimeter
G1 X198.998 Y75.262 E0.01913 ; perimeter
G1 X199.175 Y75.643 E0.01733 ; perimeter
G1 X199.289 Y76.052 E0.01748 ; perimeter
G1 X199.344 Y76.542 E0.02030 ; perimeter
G1 X199.314 Y77.072 E0.02187 ; perimeter
G1 X199.225 Y77.521 E0.01887 ; perimeter
G1 X199.079 Y77.955 E0.01886 ; perimeter
G1 X198.884 Y78.368 E0.01881 ; perimeter
G1 X198.560 Y78.884 E0.02511 ; perimeter
G1 X198.207 Y79.309 E0.02275 ; perimeter
G1 X197.797 Y79.696 E0.02321 ; perimeter
G1 X172.248 Y101.134 E1.37396 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.451 Y102.811 E0.02341 ; perimeter
G1 X165.354 Y102.811 E0.20995 ; perimeter
G1 X164.953 Y102.409 E0.02341 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X143.935 Y101.134 E0.86585 ; perimeter
M204 S1000 ; adjust acceleration
G1 X144.082 Y100.792 F10800.000 ; move inwards before travel
G1 F8640
G1 X143.879 Y99.806 E-0.30691 ; wipe and retract
G1 X145.841 Y99.806 E-0.45309 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X165.860 Y101.675 ; move to first infill point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7595.13
G1 X166.620 Y100.915 E0.05295 ; infill
G1 X167.291 Y100.915 E0.03302 ; infill
G1 X166.503 Y101.702 E0.05485 ; infill
G1 X167.174 Y101.702 E0.03302 ; infill
G1 X167.961 Y100.915 E0.05485 ; infill
G1 X168.631 Y100.915 E0.03302 ; infill
G1 X167.844 Y101.702 E0.05485 ; infill
G1 X168.514 Y101.702 E0.03302 ; infill
G1 X169.302 Y100.915 E0.05485 ; infill
G1 X169.744 Y100.915 E0.02179 ; infill
G1 X169.744 Y101.143 E0.01124 ; infill
G1 X168.984 Y101.903 E0.05295 ; infill
G1 F8640
G1 X169.744 Y101.143 E-0.24819 ; wipe and retract
G1 X169.744 Y100.915 E-0.05266 ; wipe and retract
G1 X169.302 Y100.915 E-0.10212 ; wipe and retract
G1 X168.514 Y101.702 E-0.25708 ; wipe and retract
G1 X168.081 Y101.702 E-0.09995 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X83.970 Y140.164 ; move to first perimeter point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.655 Y140.164 E0.17774 ; perimeter
G1 X79.655 Y138.745 E0.05847 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.104 E0.05600 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.678 Y140.150 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X105.443 Y138.884 ; move to first perimeter point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.86827 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X84.196 Y140.561 E0.00988 ; perimeter
G1 X79.428 Y140.561 E0.19642 ; perimeter
G1 X79.259 Y140.391 E0.00989 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X52.181 Y117.546 E1.36753 ; perimeter
G1 X51.798 Y117.183 E0.02175 ; perimeter
G1 X51.476 Y116.796 E0.02073 ; perimeter
G1 X51.210 Y116.383 E0.02026 ; perimeter
G1 X51.003 Y115.952 E0.01970 ; perimeter
G1 X50.875 Y115.568 E0.01667 ; perimeter
G1 X50.783 Y115.084 E0.02027 ; perimeter
G1 X50.768 Y114.704 E0.01570 ; perimeter
G1 X50.816 Y114.274 E0.01781 ; perimeter
G1 X50.912 Y113.929 E0.01475 ; perimeter
G1 X51.080 Y113.575 E0.01614 ; perimeter
G1 X51.295 Y113.269 E0.01543 ; perimeter
G1 X52.185 Y112.209 E0.05703 ; perimeter
G1 X52.693 Y112.634 E0.02729 ; perimeter
G1 X51.928 Y113.546 E0.04900 ; perimeter
G1 X51.700 Y113.884 E0.01682 ; perimeter
G1 X51.534 Y114.300 E0.01845 ; perimeter
G1 X51.455 Y114.729 E0.01797 ; perimeter
G1 X51.458 Y115.159 E0.01770 ; perimeter
G1 X51.543 Y115.628 E0.01966 ; perimeter
G1 X51.696 Y116.048 E0.01840 ; perimeter
G1 X51.896 Y116.414 E0.01719 ; perimeter
G1 X52.248 Y116.870 E0.02374 ; perimeter
G1 X52.530 Y117.140 E0.01608 ; perimeter
G1 X77.806 Y138.349 E1.35925 ; perimeter
G1 X105.441 Y138.349 E1.13844 ; perimeter
G1 X105.442 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X105.840 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.86832 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.360 Y140.957 E0.02341 ; perimeter
G1 X79.264 Y140.957 E0.20995 ; perimeter
G1 X78.862 Y140.555 E0.02341 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X51.918 Y117.842 E1.37396 ; perimeter
G1 X51.508 Y117.455 E0.02321 ; perimeter
G1 X51.156 Y117.031 E0.02270 ; perimeter
G1 X50.863 Y116.577 E0.02227 ; perimeter
G1 X50.635 Y116.101 E0.02173 ; perimeter
G1 X50.490 Y115.668 E0.01879 ; perimeter
G1 X50.388 Y115.130 E0.02258 ; perimeter
G1 X50.370 Y114.690 E0.01815 ; perimeter
G1 X50.425 Y114.198 E0.02037 ; perimeter
G1 X50.540 Y113.790 E0.01745 ; perimeter
G1 X50.736 Y113.375 E0.01893 ; perimeter
G1 X50.981 Y113.027 E0.01752 ; perimeter
G1 X52.136 Y111.650 E0.07405 ; perimeter
G1 X53.251 Y112.586 E0.05995 ; perimeter
G1 X52.245 Y113.784 E0.06447 ; perimeter
G1 X52.052 Y114.071 E0.01422 ; perimeter
G1 X51.916 Y114.410 E0.01508 ; perimeter
G1 X51.852 Y114.764 E0.01481 ; perimeter
G1 X51.854 Y115.122 E0.01475 ; perimeter
G1 X51.927 Y115.524 E0.01683 ; perimeter
G1 X52.058 Y115.884 E0.01577 ; perimeter
G1 X52.229 Y116.197 E0.01469 ; perimeter
G1 X52.544 Y116.605 E0.02122 ; perimeter
G1 X52.795 Y116.845 E0.01431 ; perimeter
G1 X77.950 Y137.952 E1.35277 ; perimeter
G1 X105.836 Y137.952 E1.14877 ; perimeter
G1 X105.840 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X105.440 Y139.274 F10800.000 ; move inwards before travel
G1 F8640
G1 X102.549 Y139.230 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X82.894 Y140.049 ; move to first infill point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7595.14
G1 X83.654 Y139.289 E0.05295 ; infill
G1 X83.654 Y139.061 E0.01124 ; infill
G1 X83.211 Y139.061 E0.02179 ; infill
G1 X82.424 Y139.848 E0.05485 ; infill
G1 X81.754 Y139.848 E0.03302 ; infill
G1 X82.541 Y139.061 E0.05485 ; infill
G1 X81.871 Y139.061 E0.03302 ; infill
G1 X81.083 Y139.848 E0.05485 ; infill
G1 X80.413 Y139.848 E0.03302 ; infill
G1 X81.200 Y139.061 E0.05485 ; infill
G1 X80.530 Y139.061 E0.03302 ; infill
G1 X79.770 Y139.821 E0.05294 ; infill
G1 F8640
G1 X80.530 Y139.061 E-0.24815 ; wipe and retract
G1 X81.200 Y139.061 E-0.15478 ; wipe and retract
G1 X80.413 Y139.848 E-0.25708 ; wipe and retract
G1 X80.846 Y139.848 E-0.10000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X58.773 Y110.809 ; move to first perimeter point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X56.104 Y108.569 E0.14354 ; perimeter
G1 X53.655 Y111.488 E0.15696 ; perimeter
G1 X53.147 Y111.062 E0.02729 ; perimeter
G1 X62.144 Y100.339 E0.57663 ; perimeter
G1 X62.652 Y100.765 E0.02729 ; perimeter
G1 X60.203 Y103.684 E0.15696 ; perimeter
G1 X62.872 Y105.924 E0.14354 ; perimeter
G1 X62.528 Y106.334 E0.02205 ; perimeter
G1 X59.859 Y104.094 E0.14354 ; perimeter
G1 X56.448 Y108.159 E0.21861 ; perimeter
G1 X59.117 Y110.399 E0.14354 ; perimeter
G1 X58.812 Y110.763 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.822 Y111.367 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X56.153 Y109.128 E0.14354 ; perimeter
G1 X53.704 Y112.046 E0.15696 ; perimeter
G1 X52.589 Y111.111 E0.05995 ; perimeter
G1 X62.096 Y99.781 E0.60929 ; perimeter
G1 X63.210 Y100.716 E0.05995 ; perimeter
G1 X60.761 Y103.635 E0.15696 ; perimeter
G1 X63.431 Y105.875 E0.14354 ; perimeter
G1 X62.577 Y106.892 E0.05471 ; perimeter
G1 X59.908 Y104.652 E0.14354 ; perimeter
G1 X57.006 Y108.110 E0.18596 ; perimeter
G1 X59.675 Y110.350 E0.14354 ; perimeter
G1 X58.860 Y111.321 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.549 Y111.075 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.303 Y109.249 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X101.027 Y119.184 ; move to first perimeter point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.14273 ; perimeter
G1 X97.562 Y117.764 E0.05847 ; perimeter
G1 X101.027 Y117.764 E0.14273 ; perimeter
G1 X101.027 Y119.124 E0.05600 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.423 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.25199 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X66.880 Y100.038 E0.78372 ; perimeter
G1 X66.569 Y99.810 E0.01590 ; perimeter
G1 X66.114 Y99.563 E0.02134 ; perimeter
G1 X65.686 Y99.414 E0.01867 ; perimeter
G1 X65.224 Y99.329 E0.01935 ; perimeter
G1 X64.764 Y99.323 E0.01896 ; perimeter
G1 X64.320 Y99.398 E0.01855 ; perimeter
G1 X63.910 Y99.550 E0.01799 ; perimeter
G1 X63.693 Y99.685 E0.01054 ; perimeter
G1 X63.135 Y99.216 E0.03002 ; perimeter
G1 X63.436 Y99.003 E0.01519 ; perimeter
G1 X63.760 Y98.848 E0.01483 ; perimeter
G1 X64.175 Y98.726 E0.01781 ; perimeter
G1 X64.556 Y98.674 E0.01584 ; perimeter
G1 X64.943 Y98.675 E0.01597 ; perimeter
G1 X65.504 Y98.755 E0.02330 ; perimeter
G1 X66.046 Y98.924 E0.02340 ; perimeter
G1 X66.358 Y99.059 E0.01402 ; perimeter
G1 X66.717 Y99.261 E0.01696 ; perimeter
G1 X67.222 Y99.627 E0.02570 ; perimeter
G1 X81.649 Y111.732 E0.77580 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y117.368 E0.06907 ; perimeter
G1 X101.423 Y117.368 E0.17538 ; perimeter
G1 X101.423 Y119.520 E0.08865 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.819 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.27426 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X66.635 Y100.350 E0.78913 ; perimeter
G1 X66.357 Y100.146 E0.01424 ; perimeter
G1 X65.953 Y99.927 E0.01891 ; perimeter
G1 X65.584 Y99.798 E0.01610 ; perimeter
G1 X65.185 Y99.725 E0.01669 ; perimeter
G1 X64.795 Y99.720 E0.01610 ; perimeter
G1 X64.423 Y99.783 E0.01554 ; perimeter
G1 X64.085 Y99.908 E0.01482 ; perimeter
G1 X63.776 Y100.100 E0.01498 ; perimeter
G1 X63.680 Y100.192 E0.00548 ; perimeter
G1 X62.548 Y99.242 E0.06089 ; perimeter
G1 X62.890 Y98.901 E0.01989 ; perimeter
G1 X63.235 Y98.660 E0.01733 ; perimeter
G1 X63.618 Y98.476 E0.01748 ; perimeter
G1 X64.092 Y98.337 E0.02037 ; perimeter
G1 X64.530 Y98.278 E0.01820 ; perimeter
G1 X64.972 Y98.279 E0.01822 ; perimeter
G1 X65.591 Y98.367 E0.02576 ; perimeter
G1 X66.184 Y98.552 E0.02558 ; perimeter
G1 X66.534 Y98.704 E0.01572 ; perimeter
G1 X66.931 Y98.926 E0.01875 ; perimeter
G1 X67.466 Y99.314 E0.02723 ; perimeter
G1 X81.793 Y111.335 E0.77044 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y116.972 E0.06907 ; perimeter
G1 X101.819 Y116.972 E0.20804 ; perimeter
G1 X101.819 Y119.916 E0.12131 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.426 Y119.905 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.528 Y119.946 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X99.989 Y119.069 ; move to first infill point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7897.58
G1 X100.711 Y118.347 E0.04835 ; infill
G1 X100.711 Y118.080 E0.01263 ; infill
G1 X100.333 Y118.080 E0.01791 ; infill
G1 X99.545 Y118.868 E0.05275 ; infill
G1 X98.901 Y118.868 E0.03054 ; infill
G1 X99.688 Y118.080 E0.05275 ; infill
G1 X99.043 Y118.080 E0.03054 ; infill
G1 X98.256 Y118.868 E0.05275 ; infill
G1 X97.878 Y118.868 E0.01791 ; infill
G1 X97.878 Y118.601 E0.01264 ; infill
G1 X98.600 Y117.880 E0.04834 ; infill
G1 F8640
G1 X97.878 Y118.601 E-0.23558 ; wipe and retract
G1 X97.878 Y118.868 E-0.06158 ; wipe and retract
G1 X98.256 Y118.868 E-0.08727 ; wipe and retract
G1 X99.043 Y118.080 E-0.25708 ; wipe and retract
G1 X99.557 Y118.080 E-0.11850 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X148.403 Y119.184 ; move to first perimeter point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X148.403 Y117.764 E0.05847 ; perimeter
G1 X151.868 Y117.764 E0.14273 ; perimeter
G1 X151.868 Y119.184 E0.05847 ; perimeter
G1 X148.463 Y119.184 E0.14026 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.007 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X148.007 Y117.368 E0.09112 ; perimeter
G1 X152.264 Y117.368 E0.17538 ; perimeter
G1 X152.264 Y119.045 E0.06907 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X182.212 Y99.623 E0.77606 ; perimeter
G1 X182.556 Y99.362 E0.01778 ; perimeter
G1 X183.071 Y99.060 E0.02460 ; perimeter
G1 X183.592 Y98.848 E0.02317 ; perimeter
G1 X183.983 Y98.741 E0.01670 ; perimeter
G1 X184.385 Y98.681 E0.01674 ; perimeter
G1 X184.877 Y98.675 E0.02027 ; perimeter
G1 X185.257 Y98.726 E0.01580 ; perimeter
G1 X185.620 Y98.830 E0.01556 ; perimeter
G1 X185.995 Y99.005 E0.01703 ; perimeter
G1 X186.295 Y99.217 E0.01512 ; perimeter
G1 X185.737 Y99.685 E0.03001 ; perimeter
G1 X185.519 Y99.550 E0.01053 ; perimeter
G1 X185.108 Y99.397 E0.01810 ; perimeter
G1 X184.641 Y99.322 E0.01946 ; perimeter
G1 X184.205 Y99.329 E0.01798 ; perimeter
G1 X183.742 Y99.414 E0.01940 ; perimeter
G1 X183.291 Y99.576 E0.01972 ; perimeter
G1 X182.933 Y99.764 E0.01666 ; perimeter
G1 X182.700 Y99.922 E0.01160 ; perimeter
G1 X167.976 Y112.267 E0.79156 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X148.067 Y119.580 E0.24952 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.610 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X147.610 Y116.972 E0.12378 ; perimeter
G1 X152.660 Y116.972 E0.20804 ; perimeter
G1 X152.660 Y118.648 E0.06907 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X181.965 Y99.313 E0.77053 ; perimeter
G1 X182.336 Y99.032 E0.01915 ; perimeter
G1 X182.895 Y98.704 E0.02673 ; perimeter
G1 X183.465 Y98.472 E0.02532 ; perimeter
G1 X183.901 Y98.353 E0.01865 ; perimeter
G1 X184.353 Y98.285 E0.01882 ; perimeter
G1 X184.901 Y98.278 E0.02258 ; perimeter
G1 X185.339 Y98.337 E0.01818 ; perimeter
G1 X185.760 Y98.457 E0.01804 ; perimeter
G1 X186.195 Y98.660 E0.01979 ; perimeter
G1 X186.569 Y98.925 E0.01888 ; perimeter
G1 X186.881 Y99.242 E0.01832 ; perimeter
G1 X185.749 Y100.192 E0.06088 ; perimeter
G1 X185.655 Y100.101 E0.00539 ; perimeter
G1 X185.344 Y99.908 E0.01507 ; perimeter
G1 X185.006 Y99.783 E0.01486 ; perimeter
G1 X184.613 Y99.719 E0.01642 ; perimeter
G1 X184.244 Y99.725 E0.01519 ; perimeter
G1 X183.845 Y99.798 E0.01671 ; perimeter
G1 X183.451 Y99.939 E0.01725 ; perimeter
G1 X183.137 Y100.104 E0.01461 ; perimeter
G1 X182.939 Y100.238 E0.00986 ; perimeter
G1 X168.120 Y112.663 E0.79665 ; perimeter
G1 X162.983 Y112.663 E0.21163 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X147.670 Y119.976 E0.27179 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.757 Y119.604 F10800.000 ; move inwards before travel
G1 F8640
G1 X147.610 Y116.972 E-0.69392 ; wipe and retract
G1 X147.896 Y116.972 E-0.06608 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X149.440 Y117.880 ; move to first infill point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7897.58
G1 X148.719 Y118.601 E0.04834 ; infill
G1 X148.719 Y118.868 E0.01264 ; infill
G1 X149.097 Y118.868 E0.01791 ; infill
G1 X149.884 Y118.080 E0.05275 ; infill
G1 X150.529 Y118.080 E0.03054 ; infill
G1 X149.742 Y118.868 E0.05275 ; infill
G1 X150.386 Y118.868 E0.03054 ; infill
G1 X151.173 Y118.080 E0.05275 ; infill
G1 X151.552 Y118.080 E0.01791 ; infill
G1 X151.552 Y118.347 E0.01263 ; infill
G1 X150.830 Y119.069 E0.04835 ; infill
G1 F8640
G1 X151.552 Y118.347 E-0.23562 ; wipe and retract
G1 X151.552 Y118.080 E-0.06155 ; wipe and retract
G1 X151.173 Y118.080 E-0.08730 ; wipe and retract
G1 X150.386 Y118.868 E-0.25707 ; wipe and retract
G1 X149.873 Y118.868 E-0.11845 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X190.657 Y110.809 ; move to first perimeter point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X190.313 Y110.399 E0.02205 ; perimeter
G1 X192.982 Y108.159 E0.14354 ; perimeter
G1 X189.571 Y104.094 E0.21861 ; perimeter
G1 X186.901 Y106.334 E0.14354 ; perimeter
G1 X186.557 Y105.924 E0.02205 ; perimeter
G1 X189.227 Y103.684 E0.14354 ; perimeter
G1 X186.778 Y100.765 E0.15696 ; perimeter
G1 X187.285 Y100.339 E0.02729 ; perimeter
G1 X196.282 Y111.062 E0.57663 ; perimeter
G1 X195.775 Y111.488 E0.02729 ; perimeter
G1 X193.326 Y108.569 E0.15696 ; perimeter
G1 X190.703 Y110.770 E0.14107 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.608 Y111.367 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X189.754 Y110.350 E0.05471 ; perimeter
G1 X192.423 Y108.110 E0.14354 ; perimeter
G1 X189.522 Y104.652 E0.18596 ; perimeter
G1 X186.853 Y106.892 E0.14354 ; perimeter
G1 X185.999 Y105.875 E0.05471 ; perimeter
G1 X188.668 Y103.635 E0.14354 ; perimeter
G1 X186.219 Y100.716 E0.15696 ; perimeter
G1 X187.334 Y99.781 E0.05995 ; perimeter
G1 X196.841 Y111.111 E0.60929 ; perimeter
G1 X195.726 Y112.046 E0.05995 ; perimeter
G1 X193.277 Y109.128 E0.15696 ; perimeter
G1 X190.654 Y111.329 E0.14107 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.649 Y110.969 F10800.000 ; move inwards before travel
G1 F8640
G1 X189.754 Y110.350 E-0.30695 ; wipe and retract
G1 X191.257 Y109.089 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X165.460 Y140.164 ; move to first perimeter point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y138.745 E0.05847 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.164 E0.05847 ; perimeter
G1 X165.520 Y140.164 E0.17527 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y138.745 E-0.32800 ; wipe and retract
G1 X167.331 Y138.745 E-0.43200 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X143.987 Y138.884 ; move to first perimeter point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X143.989 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E1.13844 ; perimeter
G1 X196.899 Y117.140 E1.35924 ; perimeter
G1 X197.182 Y116.870 E0.01608 ; perimeter
G1 X197.533 Y116.414 E0.02374 ; perimeter
G1 X197.733 Y116.048 E0.01719 ; perimeter
G1 X197.887 Y115.628 E0.01840 ; perimeter
G1 X197.972 Y115.159 E0.01966 ; perimeter
G1 X197.974 Y114.729 E0.01770 ; perimeter
G1 X197.896 Y114.300 E0.01797 ; perimeter
G1 X197.731 Y113.887 E0.01834 ; perimeter
G1 X197.502 Y113.546 E0.01691 ; perimeter
G1 X196.737 Y112.634 E0.04902 ; perimeter
G1 X197.245 Y112.209 E0.02729 ; perimeter
G1 X198.133 Y113.267 E0.05693 ; perimeter
G1 X198.367 Y113.606 E0.01698 ; perimeter
G1 X198.517 Y113.927 E0.01461 ; perimeter
G1 X198.614 Y114.274 E0.01483 ; perimeter
G1 X198.662 Y114.699 E0.01760 ; perimeter
G1 X198.635 Y115.168 E0.01935 ; perimeter
G1 X198.556 Y115.565 E0.01670 ; perimeter
G1 X198.426 Y115.953 E0.01686 ; perimeter
G1 X198.248 Y116.330 E0.01716 ; perimeter
G1 X197.956 Y116.794 E0.02259 ; perimeter
G1 X197.632 Y117.183 E0.02086 ; perimeter
G1 X197.248 Y117.546 E0.02175 ; perimeter
G1 X171.819 Y138.884 E1.36753 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X170.001 Y140.561 E0.00989 ; perimeter
G1 X165.233 Y140.561 E0.19642 ; perimeter
G1 X165.064 Y140.391 E0.00989 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X144.047 Y138.884 E0.86579 ; perimeter
M204 S1000 ; adjust acceleration
G1 X143.589 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X143.594 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E1.14877 ; perimeter
G1 X196.635 Y116.845 E1.35277 ; perimeter
G1 X196.886 Y116.605 E0.01431 ; perimeter
G1 X197.200 Y116.197 E0.02122 ; perimeter
G1 X197.371 Y115.884 E0.01469 ; perimeter
G1 X197.503 Y115.524 E0.01577 ; perimeter
G1 X197.576 Y115.122 E0.01683 ; perimeter
G1 X197.578 Y114.764 E0.01475 ; perimeter
G1 X197.513 Y114.410 E0.01481 ; perimeter
G1 X197.378 Y114.073 E0.01498 ; perimeter
G1 X197.185 Y113.784 E0.01431 ; perimeter
G1 X196.179 Y112.586 E0.06447 ; perimeter
G1 X197.293 Y111.650 E0.05995 ; perimeter
G1 X198.448 Y113.026 E0.07401 ; perimeter
G1 X198.713 Y113.408 E0.01913 ; perimeter
G1 X198.890 Y113.790 E0.01733 ; perimeter
G1 X199.004 Y114.198 E0.01748 ; perimeter
G1 X199.059 Y114.688 E0.02030 ; perimeter
G1 X199.029 Y115.218 E0.02187 ; perimeter
G1 X198.940 Y115.667 E0.01887 ; perimeter
G1 X198.794 Y116.101 E0.01886 ; perimeter
G1 X198.599 Y116.514 E0.01881 ; perimeter
G1 X198.274 Y117.030 E0.02511 ; perimeter
G1 X197.921 Y117.455 E0.02275 ; perimeter
G1 X197.512 Y117.842 E0.02321 ; perimeter
G1 X171.963 Y139.280 E1.37396 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X170.166 Y140.957 E0.02341 ; perimeter
G1 X165.069 Y140.957 E0.20995 ; perimeter
G1 X164.667 Y140.555 E0.02341 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X143.649 Y139.280 E0.86585 ; perimeter
M73 P50 R67
M204 S1000 ; adjust acceleration
G1 X143.797 Y138.939 F10800.000 ; move inwards before travel
G1 F8640
G1 X143.594 Y137.952 E-0.30691 ; wipe and retract
G1 X145.556 Y137.952 E-0.45309 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
G1 X165.575 Y139.821 ; move to first infill point
G1 Z10.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7595.13
G1 X166.335 Y139.061 E0.05295 ; infill
G1 X167.005 Y139.061 E0.03302 ; infill
G1 X166.218 Y139.848 E0.05485 ; infill
G1 X166.888 Y139.848 E0.03302 ; infill
G1 X167.676 Y139.061 E0.05485 ; infill
G1 X168.346 Y139.061 E0.03302 ; infill
G1 X167.559 Y139.848 E0.05485 ; infill
G1 X168.229 Y139.848 E0.03302 ; infill
G1 X169.016 Y139.061 E0.05485 ; infill
G1 X169.459 Y139.061 E0.02179 ; infill
G1 X169.459 Y139.289 E0.01124 ; infill
G1 X168.699 Y140.049 E0.05295 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;10.75


G1 F8640
G1 X169.459 Y139.289 E-0.24819 ; wipe and retract
G1 X169.459 Y139.061 E-0.05266 ; wipe and retract
G1 X169.016 Y139.061 E-0.10212 ; wipe and retract
G1 X168.229 Y139.848 E-0.25708 ; wipe and retract
G1 X167.796 Y139.848 E-0.09995 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;10.75
G1 X84.142 Y102.193 ; move to first perimeter point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.053 Y102.193 E0.16847 ; perimeter
G1 X79.940 Y102.081 E0.00656 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.185 Y102.151 E0.00409 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.893 Y102.185 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X105.273 Y100.738 ; move to first perimeter point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.84953 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.306 Y102.590 E0.02008 ; perimeter
G1 X79.889 Y102.590 E0.18200 ; perimeter
G1 X79.544 Y102.245 E0.02008 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X52.332 Y79.287 E1.37474 ; perimeter
G1 X51.949 Y78.925 E0.02172 ; perimeter
G1 X51.628 Y78.539 E0.02069 ; perimeter
G1 X51.362 Y78.126 E0.02023 ; perimeter
G1 X51.156 Y77.696 E0.01966 ; perimeter
G1 X51.025 Y77.305 E0.01701 ; perimeter
G1 X50.935 Y76.830 E0.01989 ; perimeter
G1 X50.919 Y76.442 E0.01601 ; perimeter
G1 X50.966 Y76.020 E0.01750 ; perimeter
M73 Q50 S69
G1 X51.064 Y75.669 E0.01500 ; perimeter
G1 X51.229 Y75.320 E0.01590 ; perimeter
G1 X51.447 Y75.010 E0.01562 ; perimeter
G1 X52.336 Y73.950 E0.05702 ; perimeter
G1 X52.844 Y74.376 E0.02729 ; perimeter
G1 X52.079 Y75.287 E0.04901 ; perimeter
G1 X51.851 Y75.627 E0.01685 ; perimeter
G1 X51.686 Y76.038 E0.01826 ; perimeter
G1 X51.606 Y76.476 E0.01833 ; perimeter
G1 X51.610 Y76.919 E0.01826 ; perimeter
G1 X51.694 Y77.370 E0.01890 ; perimeter
G1 X51.849 Y77.793 E0.01857 ; perimeter
G1 X52.057 Y78.171 E0.01778 ; perimeter
G1 X52.389 Y78.601 E0.02237 ; perimeter
G1 X52.681 Y78.881 E0.01668 ; perimeter
G1 X78.091 Y100.203 E1.36648 ; perimeter
G1 X105.275 Y100.203 E1.11986 ; perimeter
G1 X105.273 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X105.668 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.84947 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.471 Y102.986 E0.03361 ; perimeter
G1 X79.724 Y102.986 E0.19552 ; perimeter
G1 X79.147 Y102.409 E0.03361 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X52.069 Y79.584 E1.38117 ; perimeter
G1 X51.660 Y79.197 E0.02318 ; perimeter
G1 X51.308 Y78.774 E0.02266 ; perimeter
G1 X51.016 Y78.320 E0.02224 ; perimeter
G1 X50.788 Y77.845 E0.02170 ; perimeter
G1 X50.640 Y77.405 E0.01914 ; perimeter
G1 X50.540 Y76.876 E0.02219 ; perimeter
G1 X50.521 Y76.428 E0.01845 ; perimeter
G1 X50.576 Y75.944 E0.02006 ; perimeter
G1 X50.691 Y75.530 E0.01769 ; perimeter
G1 X50.885 Y75.120 E0.01868 ; perimeter
G1 X51.132 Y74.768 E0.01772 ; perimeter
G1 X52.287 Y73.391 E0.07404 ; perimeter
G1 X53.402 Y74.327 E0.05995 ; perimeter
G1 X52.396 Y75.526 E0.06447 ; perimeter
G1 X52.203 Y75.813 E0.01426 ; perimeter
G1 X52.068 Y76.148 E0.01489 ; perimeter
G1 X52.002 Y76.510 E0.01513 ; perimeter
G1 X52.006 Y76.880 E0.01527 ; perimeter
G1 X52.077 Y77.264 E0.01609 ; perimeter
G1 X52.211 Y77.628 E0.01596 ; perimeter
G1 X52.390 Y77.953 E0.01528 ; perimeter
G1 X52.685 Y78.335 E0.01989 ; perimeter
G1 X52.946 Y78.586 E0.01492 ; perimeter
G1 X78.235 Y99.806 E1.35999 ; perimeter
G1 X105.673 Y99.806 E1.13031 ; perimeter
G1 X105.668 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X105.268 Y101.128 F10800.000 ; move inwards before travel
G1 F8640
G1 X102.377 Y101.084 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X84.140 Y101.708 ; move to first infill point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7355.06
G1 X83.347 Y100.915 E0.05704 ; infill
G1 X82.655 Y100.915 E0.03521 ; infill
G1 X83.617 Y101.877 E0.06923 ; infill
G1 X82.925 Y101.877 E0.03521 ; infill
G1 X81.962 Y100.915 E0.06923 ; infill
G1 X81.270 Y100.915 E0.03521 ; infill
G1 X82.232 Y101.877 E0.06923 ; infill
G1 X81.540 Y101.877 E0.03521 ; infill
G1 X80.578 Y100.915 E0.06923 ; infill
G1 X80.256 Y100.915 E0.01637 ; infill
G1 X80.256 Y101.285 E0.01884 ; infill
G1 X81.049 Y102.078 E0.05703 ; infill
G1 F8640
G1 X80.256 Y101.285 E-0.25887 ; wipe and retract
G1 X80.256 Y100.915 E-0.08553 ; wipe and retract
G1 X80.578 Y100.915 E-0.07430 ; wipe and retract
G1 X81.540 Y101.877 E-0.31424 ; wipe and retract
G1 X81.657 Y101.877 E-0.02706 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X58.919 Y72.546 ; move to first perimeter point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X56.255 Y70.311 E0.14327 ; perimeter
G1 X53.806 Y73.229 E0.15696 ; perimeter
G1 X53.298 Y72.803 E0.02729 ; perimeter
G1 X62.296 Y62.081 E0.57663 ; perimeter
G1 X62.803 Y62.507 E0.02729 ; perimeter
G1 X60.354 Y65.425 E0.15696 ; perimeter
G1 X63.018 Y67.661 E0.14327 ; perimeter
G1 X62.674 Y68.071 E0.02205 ; perimeter
G1 X60.010 Y65.835 E0.14327 ; perimeter
G1 X56.599 Y69.900 E0.21861 ; perimeter
G1 X59.263 Y72.136 E0.14327 ; perimeter
G1 X58.958 Y72.500 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.968 Y73.104 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X56.304 Y70.869 E0.14327 ; perimeter
G1 X53.855 Y73.788 E0.15696 ; perimeter
G1 X52.740 Y72.852 E0.05995 ; perimeter
G1 X62.247 Y61.522 E0.60929 ; perimeter
G1 X63.362 Y62.458 E0.05995 ; perimeter
G1 X60.912 Y65.376 E0.15696 ; perimeter
G1 X63.577 Y67.612 E0.14327 ; perimeter
G1 X62.723 Y68.629 E0.05471 ; perimeter
G1 X60.059 Y66.394 E0.14327 ; perimeter
G1 X57.157 Y69.852 E0.18596 ; perimeter
G1 X59.822 Y72.087 E0.14327 ; perimeter
G1 X59.006 Y73.059 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.695 Y72.812 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.449 Y70.987 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X101.062 Y81.038 ; move to first perimeter point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.13243 ; perimeter
G1 X97.847 Y79.443 E0.06568 ; perimeter
G1 X101.062 Y79.443 E0.13243 ; perimeter
G1 X101.062 Y80.978 E0.06321 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.458 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.24169 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X67.031 Y61.779 E0.79096 ; perimeter
G1 X66.707 Y61.542 E0.01655 ; perimeter
G1 X66.262 Y61.304 E0.02077 ; perimeter
G1 X65.830 Y61.153 E0.01887 ; perimeter
G1 X65.372 Y61.070 E0.01915 ; perimeter
G1 X64.917 Y61.064 E0.01876 ; perimeter
G1 X64.475 Y61.138 E0.01845 ; perimeter
G1 X64.058 Y61.293 E0.01834 ; perimeter
G1 X63.844 Y61.426 E0.01039 ; perimeter
G1 X63.285 Y60.957 E0.03004 ; perimeter
G1 X63.586 Y60.745 E0.01515 ; perimeter
G1 X63.915 Y60.587 E0.01506 ; perimeter
G1 X64.323 Y60.468 E0.01750 ; perimeter
G1 X64.711 Y60.416 E0.01612 ; perimeter
G1 X65.106 Y60.417 E0.01629 ; perimeter
G1 X65.649 Y60.495 E0.02259 ; perimeter
G1 X66.181 Y60.659 E0.02295 ; perimeter
G1 X66.511 Y60.801 E0.01478 ; perimeter
G1 X66.877 Y61.007 E0.01730 ; perimeter
G1 X67.373 Y61.368 E0.02527 ; perimeter
G1 X81.934 Y73.586 E0.78302 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y79.047 E0.07628 ; perimeter
G1 X101.458 Y79.047 E0.16508 ; perimeter
G1 X101.458 Y81.374 E0.09586 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.855 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.26396 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X66.786 Y62.091 E0.79636 ; perimeter
G1 X66.495 Y61.878 E0.01487 ; perimeter
G1 X66.102 Y61.668 E0.01835 ; perimeter
G1 X65.729 Y61.538 E0.01631 ; perimeter
G1 X65.334 Y61.466 E0.01651 ; perimeter
G1 X64.948 Y61.461 E0.01593 ; perimeter
G1 X64.578 Y61.523 E0.01545 ; perimeter
G1 X64.233 Y61.651 E0.01513 ; perimeter
G1 X63.927 Y61.842 E0.01489 ; perimeter
G1 X63.831 Y61.933 E0.00544 ; perimeter
G1 X62.699 Y60.983 E0.06089 ; perimeter
G1 X63.036 Y60.646 E0.01964 ; perimeter
G1 X63.385 Y60.402 E0.01753 ; perimeter
G1 X63.773 Y60.216 E0.01772 ; perimeter
G1 X64.240 Y60.079 E0.02006 ; perimeter
G1 X64.685 Y60.019 E0.01849 ; perimeter
G1 X65.135 Y60.021 E0.01855 ; perimeter
G1 X65.736 Y60.107 E0.02501 ; perimeter
G1 X66.319 Y60.287 E0.02511 ; perimeter
G1 X66.687 Y60.446 E0.01652 ; perimeter
G1 X67.091 Y60.673 E0.01910 ; perimeter
G1 X67.617 Y61.055 E0.02679 ; perimeter
G1 X82.078 Y73.189 E0.77765 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y78.651 E0.07628 ; perimeter
G1 X101.855 Y78.651 E0.19774 ; perimeter
G1 X101.855 Y81.770 E0.12852 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.462 Y81.753 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.563 Y81.801 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X100.947 Y80.465 ; move to first infill point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8030.96
G1 X100.241 Y79.759 E0.04649 ; infill
G1 X99.607 Y79.759 E0.02954 ; infill
G1 X100.570 Y80.722 E0.06341 ; infill
G1 X99.936 Y80.722 E0.02954 ; infill
G1 X98.973 Y79.759 E0.06341 ; infill
G1 X98.339 Y79.759 E0.02954 ; infill
G1 X99.302 Y80.722 E0.06341 ; infill
G1 X98.668 Y80.722 E0.02954 ; infill
G1 X97.962 Y80.016 E0.04648 ; infill
G1 F8640
G1 X98.668 Y80.722 E-0.23033 ; wipe and retract
G1 X99.302 Y80.722 E-0.14638 ; wipe and retract
G1 X98.339 Y79.759 E-0.31424 ; wipe and retract
G1 X98.638 Y79.759 E-0.06905 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X148.938 Y81.038 ; move to first perimeter point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X148.938 Y79.443 E0.06568 ; perimeter
G1 X152.153 Y79.443 E0.13243 ; perimeter
G1 X152.153 Y81.038 E0.06568 ; perimeter
G1 X148.998 Y81.038 E0.12996 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.542 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X148.542 Y79.047 E0.09833 ; perimeter
G1 X152.549 Y79.047 E0.16508 ; perimeter
G1 X152.549 Y80.899 E0.07628 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X182.631 Y61.364 E0.78326 ; perimeter
G1 X182.983 Y61.099 E0.01814 ; perimeter
G1 X183.489 Y60.802 E0.02418 ; perimeter
G1 X184.001 Y60.593 E0.02277 ; perimeter
G1 X184.399 Y60.483 E0.01704 ; perimeter
G1 X184.809 Y60.422 E0.01707 ; perimeter
G1 X185.292 Y60.416 E0.01989 ; perimeter
G1 X185.679 Y60.468 E0.01608 ; perimeter
G1 X186.047 Y60.574 E0.01579 ; perimeter
G1 X186.415 Y60.746 E0.01673 ; perimeter
G1 X186.714 Y60.958 E0.01510 ; perimeter
G1 X186.156 Y61.426 E0.03002 ; perimeter
G1 X185.942 Y61.293 E0.01038 ; perimeter
G1 X185.524 Y61.138 E0.01836 ; perimeter
G1 X185.077 Y61.064 E0.01866 ; perimeter
G1 X184.627 Y61.070 E0.01854 ; perimeter
G1 X184.169 Y61.153 E0.01921 ; perimeter
G1 X183.721 Y61.312 E0.01955 ; perimeter
G1 X183.348 Y61.507 E0.01735 ; perimeter
G1 X183.115 Y61.666 E0.01163 ; perimeter
G1 X168.261 Y74.121 E0.79855 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X148.602 Y81.434 E0.23922 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.145 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X148.145 Y78.651 E0.13099 ; perimeter
G1 X152.945 Y78.651 E0.19774 ; perimeter
G1 X152.945 Y80.502 E0.07628 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X182.384 Y61.054 E0.77774 ; perimeter
G1 X182.762 Y60.769 E0.01952 ; perimeter
G1 X183.313 Y60.446 E0.02629 ; perimeter
G1 X183.873 Y60.217 E0.02490 ; perimeter
G1 X184.317 Y60.095 E0.01900 ; perimeter
G1 X184.777 Y60.026 E0.01916 ; perimeter
G1 X185.316 Y60.019 E0.02219 ; perimeter
G1 X185.760 Y60.079 E0.01847 ; perimeter
G1 X186.187 Y60.202 E0.01829 ; perimeter
G1 X186.615 Y60.402 E0.01947 ; perimeter
G1 X186.985 Y60.663 E0.01864 ; perimeter
G1 X187.301 Y60.983 E0.01852 ; perimeter
G1 X186.169 Y61.933 E0.06089 ; perimeter
G1 X186.073 Y61.842 E0.00544 ; perimeter
G1 X185.767 Y61.651 E0.01489 ; perimeter
G1 X185.422 Y61.523 E0.01514 ; perimeter
G1 X185.047 Y61.461 E0.01564 ; perimeter
G1 X184.666 Y61.466 E0.01573 ; perimeter
G1 X184.271 Y61.538 E0.01653 ; perimeter
G1 X183.880 Y61.676 E0.01707 ; perimeter
G1 X183.552 Y61.848 E0.01525 ; perimeter
G1 X183.354 Y61.983 E0.00988 ; perimeter
G1 X168.405 Y74.517 E0.80366 ; perimeter
G1 X163.268 Y74.517 E0.21163 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X148.205 Y81.830 E0.26149 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.291 Y81.458 F10800.000 ; move inwards before travel
G1 F8640
G1 X148.145 Y78.651 E-0.73433 ; wipe and retract
G1 X148.257 Y78.651 E-0.02567 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X149.053 Y80.016 ; move to first infill point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8030.96
G1 X149.759 Y80.722 E0.04648 ; infill
G1 X150.393 Y80.722 E0.02954 ; infill
G1 X149.430 Y79.759 E0.06341 ; infill
G1 X150.064 Y79.759 E0.02954 ; infill
G1 X151.026 Y80.722 E0.06341 ; infill
G1 X151.660 Y80.722 E0.02954 ; infill
G1 X150.698 Y79.759 E0.06341 ; infill
G1 X151.332 Y79.759 E0.02954 ; infill
G1 X152.038 Y80.465 E0.04649 ; infill
G1 F8640
G1 X151.332 Y79.759 E-0.23038 ; wipe and retract
G1 X150.698 Y79.759 E-0.14638 ; wipe and retract
G1 X151.660 Y80.722 E-0.31424 ; wipe and retract
G1 X151.362 Y80.722 E-0.06901 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X191.081 Y72.546 ; move to first perimeter point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X190.737 Y72.136 E0.02205 ; perimeter
G1 X193.401 Y69.900 E0.14327 ; perimeter
G1 X189.990 Y65.835 E0.21861 ; perimeter
G1 X187.326 Y68.071 E0.14327 ; perimeter
G1 X186.982 Y67.661 E0.02205 ; perimeter
G1 X189.646 Y65.425 E0.14327 ; perimeter
G1 X187.197 Y62.507 E0.15696 ; perimeter
G1 X187.704 Y62.081 E0.02729 ; perimeter
G1 X196.702 Y72.803 E0.57663 ; perimeter
G1 X196.194 Y73.229 E0.02729 ; perimeter
G1 X193.745 Y70.311 E0.15696 ; perimeter
G1 X191.127 Y72.508 E0.14080 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.032 Y73.104 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X190.178 Y72.087 E0.05471 ; perimeter
G1 X192.843 Y69.852 E0.14327 ; perimeter
G1 X189.941 Y66.394 E0.18596 ; perimeter
G1 X187.277 Y68.629 E0.14327 ; perimeter
G1 X186.423 Y67.612 E0.05471 ; perimeter
G1 X189.088 Y65.376 E0.14327 ; perimeter
G1 X186.638 Y62.458 E0.15696 ; perimeter
G1 X187.753 Y61.522 E0.05995 ; perimeter
G1 X197.260 Y72.852 E0.60929 ; perimeter
G1 X196.145 Y73.788 E0.05995 ; perimeter
G1 X193.696 Y70.869 E0.15696 ; perimeter
G1 X191.078 Y73.066 E0.14080 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.073 Y72.707 F10800.000 ; move inwards before travel
G1 F8640
G1 X190.178 Y72.087 E-0.30695 ; wipe and retract
G1 X191.682 Y70.826 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X165.858 Y102.193 ; move to first perimeter point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00656 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.947 Y102.193 E0.00656 ; perimeter
G1 X165.918 Y102.193 E0.16600 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.04757 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.349 Y100.599 E-0.37029 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X144.727 Y100.738 ; move to first perimeter point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X144.725 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E1.11986 ; perimeter
G1 X197.319 Y78.881 E1.36648 ; perimeter
G1 X197.611 Y78.601 E0.01668 ; perimeter
G1 X197.943 Y78.171 E0.02237 ; perimeter
G1 X198.151 Y77.793 E0.01778 ; perimeter
G1 X198.306 Y77.370 E0.01857 ; perimeter
G1 X198.390 Y76.919 E0.01890 ; perimeter
G1 X198.394 Y76.476 E0.01826 ; perimeter
G1 X198.314 Y76.038 E0.01833 ; perimeter
G1 X198.149 Y75.627 E0.01826 ; perimeter
G1 X197.921 Y75.287 E0.01685 ; perimeter
G1 X197.156 Y74.376 E0.04901 ; perimeter
G1 X197.664 Y73.950 E0.02729 ; perimeter
G1 X198.552 Y75.009 E0.05695 ; perimeter
G1 X198.784 Y75.342 E0.01673 ; perimeter
G1 X198.936 Y75.668 E0.01479 ; perimeter
G1 X199.034 Y76.020 E0.01506 ; perimeter
G1 X199.081 Y76.438 E0.01733 ; perimeter
G1 X199.056 Y76.898 E0.01897 ; perimeter
G1 X198.976 Y77.302 E0.01699 ; perimeter
G1 X198.846 Y77.690 E0.01685 ; perimeter
G1 X198.568 Y78.241 E0.02540 ; perimeter
G1 X198.374 Y78.537 E0.01461 ; perimeter
G1 X198.051 Y78.925 E0.02081 ; perimeter
G1 X197.668 Y79.288 E0.02172 ; perimeter
G1 X172.104 Y100.738 E1.37474 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.111 Y102.590 E0.02008 ; perimeter
G1 X165.694 Y102.590 E0.18200 ; perimeter
G1 X165.349 Y102.245 E0.02008 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X144.787 Y100.738 E0.84706 ; perimeter
M204 S1000 ; adjust acceleration
G1 X144.332 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X144.327 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E1.13030 ; perimeter
G1 X197.054 Y78.586 E1.35999 ; perimeter
G1 X197.315 Y78.335 E0.01492 ; perimeter
G1 X197.610 Y77.953 E0.01989 ; perimeter
G1 X197.789 Y77.628 E0.01528 ; perimeter
G1 X197.923 Y77.264 E0.01596 ; perimeter
G1 X197.994 Y76.880 E0.01609 ; perimeter
G1 X197.998 Y76.510 E0.01527 ; perimeter
G1 X197.932 Y76.148 E0.01513 ; perimeter
G1 X197.797 Y75.813 E0.01489 ; perimeter
G1 X197.604 Y75.526 E0.01426 ; perimeter
G1 X196.598 Y74.327 E0.06447 ; perimeter
G1 X197.713 Y73.391 E0.05995 ; perimeter
G1 X198.868 Y74.768 E0.07402 ; perimeter
G1 X199.129 Y75.144 E0.01887 ; perimeter
G1 X199.309 Y75.530 E0.01753 ; perimeter
G1 X199.424 Y75.944 E0.01772 ; perimeter
G1 X199.478 Y76.427 E0.02000 ; perimeter
G1 X199.450 Y76.947 E0.02147 ; perimeter
G1 X199.360 Y77.404 E0.01918 ; perimeter
G1 X199.213 Y77.843 E0.01908 ; perimeter
G1 X198.912 Y78.439 E0.02752 ; perimeter
G1 X198.693 Y78.773 E0.01646 ; perimeter
G1 X198.340 Y79.197 E0.02270 ; perimeter
G1 X197.931 Y79.584 E0.02318 ; perimeter
G1 X172.248 Y101.134 E1.38117 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.276 Y102.986 E0.03361 ; perimeter
G1 X165.529 Y102.986 E0.19552 ; perimeter
G1 X164.953 Y102.409 E0.03361 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X144.392 Y101.134 E0.84700 ; perimeter
M204 S1000 ; adjust acceleration
G1 X144.538 Y100.792 F10800.000 ; move inwards before travel
G1 F8640
G1 X144.327 Y99.806 E-0.30700 ; wipe and retract
G1 X146.289 Y99.806 E-0.45300 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X166.854 Y102.078 ; move to first infill point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7355.04
G1 X166.061 Y101.285 E0.05704 ; infill
G1 X166.061 Y100.915 E0.01884 ; infill
G1 X166.383 Y100.915 E0.01637 ; infill
G1 X167.345 Y101.877 E0.06923 ; infill
G1 X168.038 Y101.877 E0.03521 ; infill
G1 X167.075 Y100.915 E0.06923 ; infill
G1 X167.767 Y100.915 E0.03521 ; infill
G1 X168.730 Y101.877 E0.06923 ; infill
G1 X169.422 Y101.877 E0.03521 ; infill
G1 X168.460 Y100.915 E0.06923 ; infill
G1 X169.152 Y100.915 E0.03521 ; infill
G1 X169.945 Y101.708 E0.05704 ; infill
G1 F8640
G1 X169.152 Y100.915 E-0.25891 ; wipe and retract
G1 X168.460 Y100.915 E-0.15983 ; wipe and retract
G1 X169.422 Y101.877 E-0.31424 ; wipe and retract
G1 X169.305 Y101.877 E-0.02702 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X83.857 Y140.339 ; move to first perimeter point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.768 Y140.339 E0.16847 ; perimeter
G1 X79.655 Y140.227 E0.00656 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.899 Y140.297 E0.00409 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.608 Y140.331 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X104.988 Y138.884 ; move to first perimeter point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.84953 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X84.021 Y140.736 E0.02008 ; perimeter
G1 X79.603 Y140.736 E0.18200 ; perimeter
G1 X79.259 Y140.391 E0.02008 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X52.047 Y117.434 E1.37474 ; perimeter
G1 X51.664 Y117.071 E0.02172 ; perimeter
G1 X51.343 Y116.685 E0.02069 ; perimeter
G1 X51.077 Y116.273 E0.02023 ; perimeter
G1 X50.870 Y115.842 E0.01966 ; perimeter
G1 X50.739 Y115.451 E0.01701 ; perimeter
G1 X50.650 Y114.976 E0.01989 ; perimeter
G1 X50.634 Y114.588 E0.01601 ; perimeter
G1 X50.681 Y114.166 E0.01750 ; perimeter
G1 X50.779 Y113.815 E0.01500 ; perimeter
G1 X50.943 Y113.466 E0.01590 ; perimeter
G1 X51.161 Y113.156 E0.01562 ; perimeter
G1 X52.051 Y112.096 E0.05702 ; perimeter
G1 X52.559 Y112.522 E0.02729 ; perimeter
G1 X51.794 Y113.433 E0.04901 ; perimeter
G1 X51.566 Y113.773 E0.01685 ; perimeter
G1 X51.401 Y114.184 E0.01826 ; perimeter
G1 X51.321 Y114.622 E0.01833 ; perimeter
G1 X51.324 Y115.065 E0.01826 ; perimeter
G1 X51.409 Y115.516 E0.01890 ; perimeter
G1 X51.564 Y115.939 E0.01857 ; perimeter
G1 X51.772 Y116.317 E0.01778 ; perimeter
G1 X52.104 Y116.747 E0.02237 ; perimeter
G1 X52.396 Y117.027 E0.01668 ; perimeter
G1 X77.806 Y138.349 E1.36648 ; perimeter
G1 X104.990 Y138.349 E1.11986 ; perimeter
G1 X104.988 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X105.383 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.84947 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.185 Y141.132 E0.03361 ; perimeter
G1 X79.439 Y141.132 E0.19552 ; perimeter
G1 X78.862 Y140.555 E0.03361 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X51.783 Y117.730 E1.38117 ; perimeter
G1 X51.375 Y117.343 E0.02318 ; perimeter
G1 X51.023 Y116.920 E0.02266 ; perimeter
G1 X50.730 Y116.466 E0.02224 ; perimeter
G1 X50.502 Y115.991 E0.02170 ; perimeter
G1 X50.355 Y115.551 E0.01914 ; perimeter
G1 X50.255 Y115.022 E0.02219 ; perimeter
G1 X50.236 Y114.574 E0.01845 ; perimeter
G1 X50.290 Y114.090 E0.02006 ; perimeter
G1 X50.406 Y113.677 E0.01769 ; perimeter
G1 X50.599 Y113.266 E0.01868 ; perimeter
G1 X50.847 Y112.914 E0.01772 ; perimeter
G1 X52.002 Y111.538 E0.07404 ; perimeter
G1 X53.117 Y112.473 E0.05995 ; perimeter
G1 X52.111 Y113.672 E0.06447 ; perimeter
G1 X51.918 Y113.959 E0.01426 ; perimeter
G1 X51.783 Y114.295 E0.01489 ; perimeter
G1 X51.717 Y114.656 E0.01513 ; perimeter
G1 X51.720 Y115.026 E0.01527 ; perimeter
G1 X51.792 Y115.410 E0.01609 ; perimeter
G1 X51.926 Y115.774 E0.01596 ; perimeter
G1 X52.104 Y116.099 E0.01528 ; perimeter
G1 X52.399 Y116.481 E0.01989 ; perimeter
G1 X52.661 Y116.732 E0.01492 ; perimeter
G1 X77.950 Y137.952 E1.35999 ; perimeter
G1 X105.387 Y137.952 E1.13031 ; perimeter
G1 X105.383 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X104.983 Y139.274 F10800.000 ; move inwards before travel
G1 F8640
G1 X102.092 Y139.230 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X83.854 Y139.854 ; move to first infill point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7355.06
G1 X83.062 Y139.061 E0.05704 ; infill
G1 X82.369 Y139.061 E0.03521 ; infill
G1 X83.332 Y140.023 E0.06923 ; infill
G1 X82.639 Y140.023 E0.03521 ; infill
G1 X81.677 Y139.061 E0.06923 ; infill
G1 X80.985 Y139.061 E0.03521 ; infill
G1 X81.947 Y140.023 E0.06923 ; infill
G1 X81.255 Y140.023 E0.03521 ; infill
G1 X80.293 Y139.061 E0.06923 ; infill
G1 X79.971 Y139.061 E0.01637 ; infill
G1 X79.971 Y139.432 E0.01884 ; infill
G1 X80.764 Y140.224 E0.05703 ; infill
G1 F8640
G1 X79.971 Y139.432 E-0.25887 ; wipe and retract
G1 X79.971 Y139.061 E-0.08553 ; wipe and retract
G1 X80.293 Y139.061 E-0.07430 ; wipe and retract
G1 X81.255 Y140.023 E-0.31424 ; wipe and retract
G1 X81.372 Y140.023 E-0.02706 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X58.634 Y110.692 ; move to first perimeter point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X55.970 Y108.457 E0.14327 ; perimeter
G1 X53.521 Y111.375 E0.15696 ; perimeter
G1 X53.013 Y110.949 E0.02729 ; perimeter
G1 X62.010 Y100.227 E0.57663 ; perimeter
G1 X62.518 Y100.653 E0.02729 ; perimeter
G1 X60.069 Y103.571 E0.15696 ; perimeter
G1 X62.733 Y105.807 E0.14327 ; perimeter
G1 X62.389 Y106.217 E0.02205 ; perimeter
G1 X59.725 Y103.981 E0.14327 ; perimeter
G1 X56.314 Y108.047 E0.21861 ; perimeter
G1 X58.978 Y110.282 E0.14327 ; perimeter
G1 X58.672 Y110.646 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.683 Y111.251 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X56.019 Y109.015 E0.14327 ; perimeter
G1 X53.569 Y111.934 E0.15696 ; perimeter
G1 X52.455 Y110.998 E0.05995 ; perimeter
G1 X61.962 Y99.669 E0.60929 ; perimeter
G1 X63.076 Y100.604 E0.05995 ; perimeter
G1 X60.627 Y103.523 E0.15696 ; perimeter
G1 X63.291 Y105.758 E0.14327 ; perimeter
G1 X62.438 Y106.775 E0.05471 ; perimeter
G1 X59.774 Y104.540 E0.14327 ; perimeter
G1 X56.872 Y107.998 E0.18596 ; perimeter
G1 X59.536 Y110.233 E0.14327 ; perimeter
G1 X58.721 Y111.205 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.410 Y110.958 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.164 Y109.133 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X100.777 Y119.184 ; move to first perimeter point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.13243 ; perimeter
G1 X97.562 Y117.589 E0.06568 ; perimeter
G1 X100.777 Y117.589 E0.13243 ; perimeter
G1 X100.777 Y119.124 E0.06321 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.173 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.24169 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X66.746 Y99.925 E0.79096 ; perimeter
G1 X66.421 Y99.688 E0.01655 ; perimeter
G1 X65.977 Y99.450 E0.02077 ; perimeter
G1 X65.545 Y99.299 E0.01887 ; perimeter
G1 X65.087 Y99.216 E0.01915 ; perimeter
G1 X64.632 Y99.211 E0.01876 ; perimeter
G1 X64.190 Y99.284 E0.01845 ; perimeter
G1 X63.773 Y99.439 E0.01834 ; perimeter
G1 X63.559 Y99.572 E0.01039 ; perimeter
G1 X63.000 Y99.104 E0.03004 ; perimeter
G1 X63.301 Y98.891 E0.01515 ; perimeter
G1 X63.630 Y98.733 E0.01506 ; perimeter
G1 X64.038 Y98.614 E0.01750 ; perimeter
G1 X64.426 Y98.562 E0.01612 ; perimeter
G1 X64.821 Y98.563 E0.01629 ; perimeter
G1 X65.364 Y98.641 E0.02259 ; perimeter
G1 X65.896 Y98.806 E0.02295 ; perimeter
G1 X66.226 Y98.948 E0.01478 ; perimeter
G1 X66.592 Y99.154 E0.01730 ; perimeter
G1 X67.088 Y99.514 E0.02527 ; perimeter
G1 X81.649 Y111.732 E0.78302 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y117.193 E0.07628 ; perimeter
G1 X101.173 Y117.193 E0.16508 ; perimeter
G1 X101.173 Y119.520 E0.09586 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.569 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.26396 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X66.501 Y100.238 E0.79636 ; perimeter
M73 P51 R66
G1 X66.210 Y100.025 E0.01487 ; perimeter
G1 X65.817 Y99.814 E0.01835 ; perimeter
G1 X65.443 Y99.684 E0.01631 ; perimeter
G1 X65.049 Y99.612 E0.01651 ; perimeter
G1 X64.662 Y99.607 E0.01593 ; perimeter
G1 X64.293 Y99.669 E0.01545 ; perimeter
G1 X63.948 Y99.797 E0.01513 ; perimeter
G1 X63.641 Y99.988 E0.01489 ; perimeter
G1 X63.546 Y100.079 E0.00544 ; perimeter
G1 X62.414 Y99.129 E0.06089 ; perimeter
G1 X62.751 Y98.792 E0.01964 ; perimeter
G1 X63.100 Y98.548 E0.01753 ; perimeter
G1 X63.488 Y98.362 E0.01772 ; perimeter
G1 X63.955 Y98.225 E0.02006 ; perimeter
G1 X64.400 Y98.165 E0.01849 ; perimeter
G1 X64.850 Y98.167 E0.01855 ; perimeter
G1 X65.451 Y98.253 E0.02501 ; perimeter
G1 X66.034 Y98.433 E0.02511 ; perimeter
G1 X66.402 Y98.592 E0.01652 ; perimeter
G1 X66.806 Y98.819 E0.01910 ; perimeter
G1 X67.332 Y99.201 E0.02679 ; perimeter
G1 X81.793 Y111.335 E0.77765 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y116.797 E0.07628 ; perimeter
G1 X101.569 Y116.797 E0.19774 ; perimeter
G1 X101.569 Y119.916 E0.12852 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.177 Y119.899 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.278 Y119.947 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X100.662 Y118.611 ; move to first infill point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8030.96
G1 X99.956 Y117.905 E0.04649 ; infill
G1 X99.322 Y117.905 E0.02954 ; infill
G1 X100.284 Y118.868 E0.06341 ; infill
G1 X99.651 Y118.868 E0.02954 ; infill
G1 X98.688 Y117.905 E0.06341 ; infill
G1 X98.054 Y117.905 E0.02954 ; infill
G1 X99.017 Y118.868 E0.06341 ; infill
G1 X98.383 Y118.868 E0.02954 ; infill
G1 X97.677 Y118.162 E0.04648 ; infill
G1 F8640
G1 X98.383 Y118.868 E-0.23033 ; wipe and retract
G1 X99.017 Y118.868 E-0.14638 ; wipe and retract
G1 X98.054 Y117.905 E-0.31424 ; wipe and retract
G1 X98.353 Y117.905 E-0.06905 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
M73 Q50 S68
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X148.653 Y119.184 ; move to first perimeter point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X148.653 Y117.589 E0.06568 ; perimeter
G1 X151.868 Y117.589 E0.13243 ; perimeter
G1 X151.868 Y119.184 E0.06568 ; perimeter
G1 X148.713 Y119.184 E0.12996 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.257 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X148.257 Y117.193 E0.09833 ; perimeter
G1 X152.264 Y117.193 E0.16508 ; perimeter
G1 X152.264 Y119.045 E0.07628 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X182.346 Y99.510 E0.78326 ; perimeter
G1 X182.698 Y99.245 E0.01814 ; perimeter
G1 X183.204 Y98.948 E0.02418 ; perimeter
G1 X183.715 Y98.739 E0.02277 ; perimeter
G1 X184.114 Y98.629 E0.01704 ; perimeter
G1 X184.524 Y98.568 E0.01707 ; perimeter
G1 X185.007 Y98.562 E0.01989 ; perimeter
G1 X185.394 Y98.614 E0.01608 ; perimeter
G1 X185.762 Y98.720 E0.01579 ; perimeter
G1 X186.130 Y98.892 E0.01673 ; perimeter
G1 X186.429 Y99.104 E0.01510 ; perimeter
G1 X185.871 Y99.572 E0.03002 ; perimeter
G1 X185.657 Y99.439 E0.01038 ; perimeter
G1 X185.239 Y99.284 E0.01836 ; perimeter
G1 X184.792 Y99.210 E0.01866 ; perimeter
G1 X184.342 Y99.216 E0.01854 ; perimeter
G1 X183.883 Y99.300 E0.01921 ; perimeter
G1 X183.436 Y99.458 E0.01955 ; perimeter
G1 X183.063 Y99.654 E0.01735 ; perimeter
G1 X182.830 Y99.812 E0.01163 ; perimeter
G1 X167.976 Y112.267 E0.79855 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X148.317 Y119.580 E0.23922 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.860 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X147.860 Y116.797 E0.13099 ; perimeter
G1 X152.660 Y116.797 E0.19774 ; perimeter
G1 X152.660 Y118.648 E0.07628 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X182.099 Y99.200 E0.77774 ; perimeter
G1 X182.477 Y98.915 E0.01952 ; perimeter
G1 X183.028 Y98.592 E0.02629 ; perimeter
G1 X183.587 Y98.363 E0.02490 ; perimeter
G1 X184.032 Y98.241 E0.01900 ; perimeter
G1 X184.492 Y98.172 E0.01916 ; perimeter
G1 X185.031 Y98.165 E0.02219 ; perimeter
G1 X185.475 Y98.225 E0.01847 ; perimeter
G1 X185.902 Y98.348 E0.01829 ; perimeter
G1 X186.330 Y98.548 E0.01947 ; perimeter
G1 X186.699 Y98.810 E0.01864 ; perimeter
G1 X187.016 Y99.129 E0.01852 ; perimeter
G1 X185.883 Y100.079 E0.06089 ; perimeter
G1 X185.788 Y99.988 E0.00544 ; perimeter
G1 X185.481 Y99.797 E0.01489 ; perimeter
G1 X185.137 Y99.669 E0.01514 ; perimeter
G1 X184.762 Y99.607 E0.01564 ; perimeter
G1 X184.380 Y99.612 E0.01573 ; perimeter
G1 X183.986 Y99.684 E0.01653 ; perimeter
G1 X183.595 Y99.822 E0.01707 ; perimeter
G1 X183.267 Y99.994 E0.01525 ; perimeter
G1 X183.069 Y100.129 E0.00988 ; perimeter
G1 X168.120 Y112.663 E0.80366 ; perimeter
G1 X162.983 Y112.663 E0.21163 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X147.920 Y119.976 E0.26149 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.006 Y119.604 F10800.000 ; move inwards before travel
G1 F8640
G1 X147.860 Y116.797 E-0.73433 ; wipe and retract
G1 X147.971 Y116.797 E-0.02567 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X148.768 Y118.162 ; move to first infill point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8030.96
G1 X149.473 Y118.868 E0.04648 ; infill
G1 X150.107 Y118.868 E0.02954 ; infill
G1 X149.145 Y117.905 E0.06341 ; infill
G1 X149.779 Y117.905 E0.02954 ; infill
G1 X150.741 Y118.868 E0.06341 ; infill
G1 X151.375 Y118.868 E0.02954 ; infill
G1 X150.413 Y117.905 E0.06341 ; infill
G1 X151.047 Y117.905 E0.02954 ; infill
G1 X151.752 Y118.611 E0.04649 ; infill
G1 F8640
G1 X151.047 Y117.905 E-0.23038 ; wipe and retract
G1 X150.413 Y117.905 E-0.14638 ; wipe and retract
G1 X151.375 Y118.868 E-0.31424 ; wipe and retract
G1 X151.076 Y118.868 E-0.06901 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X190.796 Y110.692 ; move to first perimeter point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X190.452 Y110.282 E0.02205 ; perimeter
G1 X193.116 Y108.047 E0.14327 ; perimeter
G1 X189.705 Y103.981 E0.21861 ; perimeter
G1 X187.041 Y106.217 E0.14327 ; perimeter
G1 X186.697 Y105.807 E0.02205 ; perimeter
G1 X189.361 Y103.571 E0.14327 ; perimeter
G1 X186.912 Y100.653 E0.15696 ; perimeter
G1 X187.419 Y100.227 E0.02729 ; perimeter
G1 X196.417 Y110.949 E0.57663 ; perimeter
G1 X195.909 Y111.375 E0.02729 ; perimeter
G1 X193.460 Y108.457 E0.15696 ; perimeter
G1 X190.842 Y110.654 E0.14080 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.747 Y111.251 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X189.893 Y110.233 E0.05471 ; perimeter
G1 X192.558 Y107.998 E0.14327 ; perimeter
G1 X189.656 Y104.540 E0.18596 ; perimeter
G1 X186.992 Y106.775 E0.14327 ; perimeter
G1 X186.138 Y105.758 E0.05471 ; perimeter
G1 X188.802 Y103.523 E0.14327 ; perimeter
G1 X186.353 Y100.604 E0.15696 ; perimeter
G1 X187.468 Y99.669 E0.05995 ; perimeter
G1 X196.975 Y110.998 E0.60929 ; perimeter
G1 X195.860 Y111.934 E0.05995 ; perimeter
G1 X193.411 Y109.015 E0.15696 ; perimeter
G1 X190.793 Y111.212 E0.14080 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.788 Y110.853 F10800.000 ; move inwards before travel
G1 F8640
G1 X189.893 Y110.233 E-0.30695 ; wipe and retract
G1 X191.396 Y108.972 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X165.573 Y140.339 ; move to first perimeter point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00656 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.662 Y140.339 E0.00656 ; perimeter
G1 X165.633 Y140.339 E0.16600 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.04757 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X167.064 Y138.745 E-0.37029 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X144.442 Y138.884 ; move to first perimeter point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X144.440 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E1.11986 ; perimeter
G1 X197.034 Y117.027 E1.36648 ; perimeter
G1 X197.326 Y116.747 E0.01668 ; perimeter
G1 X197.658 Y116.317 E0.02237 ; perimeter
G1 X197.866 Y115.939 E0.01778 ; perimeter
G1 X198.021 Y115.516 E0.01857 ; perimeter
G1 X198.105 Y115.065 E0.01890 ; perimeter
G1 X198.109 Y114.622 E0.01826 ; perimeter
G1 X198.029 Y114.184 E0.01833 ; perimeter
G1 X197.864 Y113.773 E0.01826 ; perimeter
G1 X197.636 Y113.433 E0.01685 ; perimeter
G1 X196.871 Y112.522 E0.04901 ; perimeter
G1 X197.379 Y112.096 E0.02729 ; perimeter
G1 X198.267 Y113.155 E0.05695 ; perimeter
G1 X198.499 Y113.488 E0.01673 ; perimeter
G1 X198.651 Y113.814 E0.01479 ; perimeter
G1 X198.749 Y114.166 E0.01506 ; perimeter
G1 X198.796 Y114.584 E0.01733 ; perimeter
G1 X198.771 Y115.044 E0.01897 ; perimeter
G1 X198.691 Y115.449 E0.01699 ; perimeter
G1 X198.561 Y115.836 E0.01685 ; perimeter
G1 X198.283 Y116.387 E0.02540 ; perimeter
G1 X198.088 Y116.683 E0.01461 ; perimeter
G1 X197.765 Y117.071 E0.02081 ; perimeter
G1 X197.382 Y117.434 E0.02172 ; perimeter
G1 X171.819 Y138.884 E1.37474 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.826 Y140.736 E0.02008 ; perimeter
G1 X165.408 Y140.736 E0.18200 ; perimeter
G1 X165.064 Y140.391 E0.02008 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X144.502 Y138.884 E0.84706 ; perimeter
M204 S1000 ; adjust acceleration
G1 X144.047 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X144.042 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E1.13030 ; perimeter
G1 X196.769 Y116.732 E1.35999 ; perimeter
G1 X197.030 Y116.481 E0.01492 ; perimeter
G1 X197.325 Y116.099 E0.01989 ; perimeter
G1 X197.504 Y115.774 E0.01528 ; perimeter
G1 X197.637 Y115.410 E0.01596 ; perimeter
G1 X197.709 Y115.026 E0.01609 ; perimeter
G1 X197.712 Y114.656 E0.01527 ; perimeter
G1 X197.646 Y114.295 E0.01513 ; perimeter
G1 X197.512 Y113.959 E0.01489 ; perimeter
G1 X197.319 Y113.672 E0.01426 ; perimeter
G1 X196.313 Y112.473 E0.06447 ; perimeter
G1 X197.427 Y111.538 E0.05995 ; perimeter
G1 X198.582 Y112.914 E0.07402 ; perimeter
G1 X198.844 Y113.290 E0.01887 ; perimeter
G1 X199.024 Y113.676 E0.01753 ; perimeter
G1 X199.139 Y114.090 E0.01772 ; perimeter
G1 X199.193 Y114.573 E0.02000 ; perimeter
G1 X199.165 Y115.093 E0.02147 ; perimeter
G1 X199.075 Y115.550 E0.01918 ; perimeter
G1 X198.928 Y115.989 E0.01908 ; perimeter
G1 X198.627 Y116.586 E0.02752 ; perimeter
G1 X198.407 Y116.919 E0.01646 ; perimeter
G1 X198.055 Y117.343 E0.02270 ; perimeter
G1 X197.646 Y117.730 E0.02318 ; perimeter
G1 X171.963 Y139.280 E1.38117 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.990 Y141.132 E0.03361 ; perimeter
G1 X165.244 Y141.132 E0.19552 ; perimeter
G1 X164.667 Y140.555 E0.03361 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X144.107 Y139.280 E0.84700 ; perimeter
M204 S1000 ; adjust acceleration
G1 X144.253 Y138.938 F10800.000 ; move inwards before travel
G1 F8640
G1 X144.042 Y137.952 E-0.30700 ; wipe and retract
G1 X146.004 Y137.952 E-0.45300 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
G1 X166.569 Y140.224 ; move to first infill point
G1 Z10.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7355.04
G1 X165.776 Y139.432 E0.05704 ; infill
G1 X165.776 Y139.061 E0.01884 ; infill
G1 X166.098 Y139.061 E0.01637 ; infill
G1 X167.060 Y140.023 E0.06923 ; infill
G1 X167.752 Y140.023 E0.03521 ; infill
G1 X166.790 Y139.061 E0.06923 ; infill
G1 X167.482 Y139.061 E0.03521 ; infill
G1 X168.445 Y140.023 E0.06923 ; infill
G1 X169.137 Y140.023 E0.03521 ; infill
G1 X168.174 Y139.061 E0.06923 ; infill
G1 X168.867 Y139.061 E0.03521 ; infill
G1 X169.660 Y139.854 E0.05704 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;11


G1 F8640
G1 X168.867 Y139.061 E-0.25891 ; wipe and retract
G1 X168.174 Y139.061 E-0.15983 ; wipe and retract
G1 X169.137 Y140.023 E-0.31424 ; wipe and retract
G1 X169.020 Y140.023 E-0.02702 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;11
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X104.846 Y100.738 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.83194 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X52.198 Y79.175 E1.38195 ; perimeter
G1 X51.816 Y78.813 E0.02168 ; perimeter
G1 X51.495 Y78.428 E0.02066 ; perimeter
G1 X51.229 Y78.016 E0.02020 ; perimeter
G1 X51.023 Y77.587 E0.01962 ; perimeter
G1 X50.889 Y77.187 E0.01735 ; perimeter
G1 X50.801 Y76.722 E0.01950 ; perimeter
G1 X50.785 Y76.327 E0.01631 ; perimeter
G1 X50.831 Y75.912 E0.01719 ; perimeter
G1 X50.930 Y75.555 E0.01525 ; perimeter
G1 X51.092 Y75.212 E0.01565 ; perimeter
G1 X51.313 Y74.897 E0.01581 ; perimeter
G1 X52.202 Y73.837 E0.05701 ; perimeter
G1 X52.710 Y74.263 E0.02729 ; perimeter
G1 X51.945 Y75.175 E0.04901 ; perimeter
G1 X51.717 Y75.514 E0.01685 ; perimeter
G1 X51.552 Y75.925 E0.01826 ; perimeter
G1 X51.472 Y76.363 E0.01834 ; perimeter
G1 X51.476 Y76.811 E0.01847 ; perimeter
G1 X51.560 Y77.256 E0.01864 ; perimeter
G1 X51.717 Y77.684 E0.01877 ; perimeter
G1 X51.933 Y78.074 E0.01837 ; perimeter
G1 X52.244 Y78.477 E0.02100 ; perimeter
G1 X52.546 Y78.768 E0.01727 ; perimeter
G1 X78.091 Y100.203 E1.37372 ; perimeter
G1 X104.846 Y100.203 E1.10219 ; perimeter
G1 X104.846 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X105.242 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.83194 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03671 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X51.935 Y79.471 E1.38838 ; perimeter
G1 X51.526 Y79.085 E0.02314 ; perimeter
G1 X51.175 Y78.663 E0.02263 ; perimeter
G1 X50.883 Y78.210 E0.02221 ; perimeter
G1 X50.655 Y77.736 E0.02167 ; perimeter
G1 X50.505 Y77.287 E0.01948 ; perimeter
G1 X50.406 Y76.767 E0.02180 ; perimeter
G1 X50.387 Y76.313 E0.01875 ; perimeter
G1 X50.441 Y75.836 E0.01975 ; perimeter
G1 X50.557 Y75.417 E0.01794 ; perimeter
G1 X50.748 Y75.012 E0.01844 ; perimeter
G1 X50.998 Y74.656 E0.01792 ; perimeter
G1 X52.153 Y73.279 E0.07404 ; perimeter
G1 X53.268 Y74.214 E0.05995 ; perimeter
G1 X52.262 Y75.413 E0.06447 ; perimeter
G1 X52.069 Y75.701 E0.01426 ; perimeter
G1 X51.934 Y76.036 E0.01489 ; perimeter
G1 X51.868 Y76.397 E0.01513 ; perimeter
G1 X51.872 Y76.773 E0.01546 ; perimeter
G1 X51.943 Y77.150 E0.01584 ; perimeter
G1 X52.078 Y77.519 E0.01616 ; perimeter
G1 X52.265 Y77.856 E0.01587 ; perimeter
G1 X52.540 Y78.212 E0.01856 ; perimeter
G1 X52.811 Y78.473 E0.01552 ; perimeter
G1 X78.235 Y99.806 E1.36722 ; perimeter
G1 X105.242 Y99.806 E1.11257 ; perimeter
G1 X105.242 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X104.842 Y101.128 F10800.000 ; move inwards before travel
G1 F8640
G1 X101.951 Y101.084 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X83.730 Y102.131 ; move to first infill point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.939 Y101.923 E0.01484 ; infill
G1 X83.939 Y101.238 E0.03448 ; infill
G1 X83.246 Y101.931 E0.04931 ; infill
G1 X82.561 Y101.931 E0.03448 ; infill
G1 X83.577 Y100.915 E0.07230 ; infill
G1 X82.892 Y100.915 E0.03448 ; infill
G1 X81.876 Y101.931 E0.07230 ; infill
G1 X81.191 Y101.931 E0.03448 ; infill
G1 X82.207 Y100.915 E0.07230 ; infill
G1 X81.522 Y100.915 E0.03448 ; infill
G1 X80.506 Y101.931 E0.07230 ; infill
G1 X80.256 Y101.931 E0.01260 ; infill
G1 X80.256 Y101.496 E0.02188 ; infill
G1 X81.038 Y100.714 E0.05566 ; infill
G1 F8640
G1 X80.256 Y101.496 E-0.25530 ; wipe and retract
G1 X80.256 Y101.931 E-0.10036 ; wipe and retract
G1 X80.506 Y101.931 E-0.05779 ; wipe and retract
G1 X81.522 Y100.915 E-0.33164 ; wipe and retract
G1 X81.587 Y100.915 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X58.780 Y72.429 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X56.121 Y70.198 E0.14300 ; perimeter
G1 X53.672 Y73.117 E0.15696 ; perimeter
G1 X53.164 Y72.691 E0.02729 ; perimeter
G1 X62.161 Y61.968 E0.57663 ; perimeter
G1 X62.669 Y62.394 E0.02729 ; perimeter
G1 X60.220 Y65.313 E0.15696 ; perimeter
G1 X62.879 Y67.544 E0.14300 ; perimeter
G1 X62.535 Y67.954 E0.02205 ; perimeter
G1 X59.876 Y65.723 E0.14300 ; perimeter
G1 X56.465 Y69.788 E0.21861 ; perimeter
G1 X59.124 Y72.019 E0.14300 ; perimeter
G1 X58.818 Y72.383 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.829 Y72.988 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X56.170 Y70.756 E0.14300 ; perimeter
G1 X53.721 Y73.675 E0.15696 ; perimeter
G1 X52.606 Y72.740 E0.05995 ; perimeter
G1 X62.113 Y61.410 E0.60929 ; perimeter
G1 X63.227 Y62.345 E0.05995 ; perimeter
G1 X60.778 Y65.264 E0.15696 ; perimeter
G1 X63.438 Y67.495 E0.14300 ; perimeter
G1 X62.584 Y68.512 E0.05471 ; perimeter
G1 X59.925 Y66.281 E0.14300 ; perimeter
G1 X57.023 Y69.739 E0.18596 ; perimeter
G1 X59.682 Y71.970 E0.14300 ; perimeter
G1 X58.867 Y72.942 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.556 Y72.695 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.310 Y70.870 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X100.812 Y81.038 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.12213 ; perimeter
G1 X97.847 Y79.268 E0.07289 ; perimeter
G1 X100.812 Y79.268 E0.12213 ; perimeter
G1 X100.812 Y80.978 E0.07042 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.208 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.23140 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X66.896 Y61.666 E0.79819 ; perimeter
G1 X66.559 Y61.421 E0.01721 ; perimeter
G1 X66.126 Y61.190 E0.02021 ; perimeter
G1 X65.685 Y61.038 E0.01921 ; perimeter
G1 X65.236 Y60.957 E0.01879 ; perimeter
G1 X64.783 Y60.952 E0.01864 ; perimeter
G1 X64.341 Y61.026 E0.01847 ; perimeter
G1 X63.924 Y61.181 E0.01834 ; perimeter
G1 X63.710 Y61.314 E0.01039 ; perimeter
G1 X63.151 Y60.844 E0.03007 ; perimeter
G1 X63.451 Y60.633 E0.01512 ; perimeter
G1 X63.786 Y60.473 E0.01529 ; perimeter
G1 X64.186 Y60.356 E0.01719 ; perimeter
G1 X64.580 Y60.303 E0.01640 ; perimeter
G1 X64.984 Y60.305 E0.01661 ; perimeter
G1 X65.509 Y60.381 E0.02189 ; perimeter
G1 X66.032 Y60.541 E0.02250 ; perimeter
G1 X66.378 Y60.690 E0.01554 ; perimeter
G1 X66.751 Y60.900 E0.01764 ; perimeter
G1 X67.239 Y61.255 E0.02485 ; perimeter
G1 X81.934 Y73.586 E0.79025 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y78.872 E0.08349 ; perimeter
G1 X101.208 Y78.872 E0.15478 ; perimeter
G1 X101.208 Y81.374 E0.10307 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.605 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.25367 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X66.652 Y61.979 E0.80358 ; perimeter
G1 X66.348 Y61.757 E0.01550 ; perimeter
G1 X65.967 Y61.555 E0.01778 ; perimeter
G1 X65.585 Y61.422 E0.01666 ; perimeter
G1 X65.198 Y61.353 E0.01616 ; perimeter
G1 X64.814 Y61.349 E0.01584 ; perimeter
G1 X64.444 Y61.410 E0.01546 ; perimeter
G1 X64.099 Y61.538 E0.01513 ; perimeter
G1 X63.792 Y61.729 E0.01489 ; perimeter
G1 X63.697 Y61.821 E0.00544 ; perimeter
G1 X62.565 Y60.871 E0.06089 ; perimeter
G1 X62.898 Y60.537 E0.01940 ; perimeter
G1 X63.250 Y60.290 E0.01774 ; perimeter
G1 X63.643 Y60.102 E0.01795 ; perimeter
G1 X64.103 Y59.967 E0.01975 ; perimeter
G1 X64.555 Y59.906 E0.01878 ; perimeter
G1 X65.013 Y59.909 E0.01887 ; perimeter
G1 X65.596 Y59.993 E0.02427 ; perimeter
G1 X66.168 Y60.168 E0.02464 ; perimeter
G1 X66.554 Y60.334 E0.01731 ; perimeter
G1 X66.966 Y60.566 E0.01946 ; perimeter
G1 X67.483 Y60.943 E0.02635 ; perimeter
G1 X82.078 Y73.189 E0.78487 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y78.476 E0.08349 ; perimeter
G1 X101.605 Y78.476 E0.18744 ; perimeter
G1 X101.605 Y81.770 E0.13573 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.214 Y81.746 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.313 Y81.802 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X99.651 Y80.922 ; move to first infill point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7001.94
G1 X100.496 Y80.077 E0.06388 ; infill
G1 X100.496 Y79.584 E0.02634 ; infill
G1 X100.262 Y79.584 E0.01251 ; infill
G1 X99.124 Y80.722 E0.08595 ; infill
G1 X98.397 Y80.722 E0.03886 ; infill
G1 X99.535 Y79.584 E0.08595 ; infill
G1 X98.808 Y79.584 E0.03886 ; infill
G1 X97.962 Y80.429 E0.06387 ; infill
G1 F8640
G1 X98.808 Y79.584 E-0.27597 ; wipe and retract
G1 X99.535 Y79.584 E-0.16789 ; wipe and retract
G1 X98.567 Y80.552 E-0.31614 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X149.188 Y81.038 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.188 Y79.268 E0.07289 ; perimeter
G1 X152.153 Y79.268 E0.12213 ; perimeter
G1 X152.153 Y81.038 E0.07289 ; perimeter
G1 X149.248 Y81.038 E0.11966 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.792 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X148.792 Y78.872 E0.10555 ; perimeter
G1 X152.549 Y78.872 E0.15478 ; perimeter
G1 X152.549 Y80.899 E0.08349 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X182.763 Y61.253 E0.79038 ; perimeter
G1 X183.188 Y60.938 E0.02179 ; perimeter
G1 X183.503 Y60.754 E0.01501 ; perimeter
G1 X184.079 Y60.498 E0.02598 ; perimeter
G1 X184.532 Y60.371 E0.01937 ; perimeter
G1 X184.948 Y60.309 E0.01735 ; perimeter
G1 X185.422 Y60.303 E0.01950 ; perimeter
G1 X185.815 Y60.356 E0.01636 ; perimeter
G1 X186.189 Y60.464 E0.01602 ; perimeter
G1 X186.550 Y60.634 E0.01643 ; perimeter
G1 X186.849 Y60.845 E0.01507 ; perimeter
G1 X186.290 Y61.314 E0.03004 ; perimeter
G1 X186.076 Y61.181 E0.01039 ; perimeter
G1 X185.659 Y61.026 E0.01834 ; perimeter
G1 X185.217 Y60.952 E0.01847 ; perimeter
G1 X184.764 Y60.957 E0.01865 ; perimeter
G1 X184.310 Y61.039 E0.01898 ; perimeter
G1 X183.866 Y61.194 E0.01938 ; perimeter
G1 X183.478 Y61.397 E0.01804 ; perimeter
G1 X183.245 Y61.557 E0.01166 ; perimeter
G1 X168.261 Y74.121 E0.80554 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X148.852 Y81.434 E0.22892 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.395 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X148.395 Y78.476 E0.13820 ; perimeter
G1 X152.945 Y78.476 E0.18744 ; perimeter
G1 X152.945 Y80.502 E0.08349 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X182.518 Y60.942 E0.78492 ; perimeter
G1 X182.969 Y60.606 E0.02318 ; perimeter
G1 X183.322 Y60.401 E0.01681 ; perimeter
G1 X183.944 Y60.124 E0.02806 ; perimeter
G1 X184.449 Y59.983 E0.02157 ; perimeter
G1 X184.916 Y59.913 E0.01948 ; perimeter
G1 X185.446 Y59.906 E0.02180 ; perimeter
G1 X185.897 Y59.967 E0.01877 ; perimeter
G1 X186.329 Y60.092 E0.01854 ; perimeter
G1 X186.750 Y60.290 E0.01916 ; perimeter
G1 X187.115 Y60.548 E0.01841 ; perimeter
G1 X187.435 Y60.871 E0.01871 ; perimeter
G1 X186.303 Y61.821 E0.06089 ; perimeter
G1 X186.208 Y61.729 E0.00544 ; perimeter
G1 X185.901 Y61.538 E0.01489 ; perimeter
G1 X185.556 Y61.410 E0.01513 ; perimeter
G1 X185.186 Y61.349 E0.01546 ; perimeter
G1 X184.802 Y61.353 E0.01584 ; perimeter
G1 X184.412 Y61.423 E0.01632 ; perimeter
G1 X184.025 Y61.559 E0.01689 ; perimeter
G1 X183.683 Y61.738 E0.01589 ; perimeter
G1 X183.484 Y61.873 E0.00990 ; perimeter
G1 X168.405 Y74.517 E0.81067 ; perimeter
G1 X163.268 Y74.517 E0.21163 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X148.455 Y81.830 E0.25119 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.541 Y81.458 F10800.000 ; move inwards before travel
G1 F8640
G1 X148.397 Y78.539 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X149.303 Y80.429 ; move to first infill point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7001.94
G1 X150.148 Y79.584 E0.06387 ; infill
G1 X150.875 Y79.584 E0.03886 ; infill
G1 X149.738 Y80.722 E0.08595 ; infill
G1 X150.465 Y80.722 E0.03886 ; infill
G1 X151.603 Y79.584 E0.08595 ; infill
G1 X151.837 Y79.584 E0.01251 ; infill
G1 X151.837 Y80.077 E0.02634 ; infill
G1 X150.991 Y80.922 E0.06388 ; infill
G1 F8640
G1 X151.837 Y80.077 E-0.27601 ; wipe and retract
G1 X151.837 Y79.584 E-0.11383 ; wipe and retract
G1 X151.603 Y79.584 E-0.05406 ; wipe and retract
G1 X150.635 Y80.552 E-0.31610 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X191.220 Y72.429 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X190.876 Y72.019 E0.02205 ; perimeter
G1 X193.535 Y69.788 E0.14300 ; perimeter
G1 X190.124 Y65.723 E0.21861 ; perimeter
M73 P51 R65
G1 X187.465 Y67.954 E0.14300 ; perimeter
G1 X187.121 Y67.544 E0.02205 ; perimeter
G1 X189.780 Y65.313 E0.14300 ; perimeter
G1 X187.331 Y62.394 E0.15696 ; perimeter
G1 X187.839 Y61.968 E0.02730 ; perimeter
G1 X196.836 Y72.691 E0.57663 ; perimeter
G1 X196.328 Y73.117 E0.02729 ; perimeter
G1 X193.879 Y70.198 E0.15696 ; perimeter
G1 X191.266 Y72.391 E0.14053 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.171 Y72.988 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X190.318 Y71.970 E0.05471 ; perimeter
G1 X192.977 Y69.739 E0.14300 ; perimeter
G1 X190.075 Y66.281 E0.18596 ; perimeter
G1 X187.416 Y68.512 E0.14300 ; perimeter
G1 X186.562 Y67.495 E0.05471 ; perimeter
G1 X189.222 Y65.264 E0.14300 ; perimeter
G1 X186.773 Y62.345 E0.15696 ; perimeter
M73 Q51 S67
G1 X187.887 Y61.410 E0.05995 ; perimeter
G1 X197.394 Y72.740 E0.60929 ; perimeter
G1 X196.279 Y73.675 E0.05995 ; perimeter
G1 X193.830 Y70.756 E0.15696 ; perimeter
G1 X191.217 Y72.949 E0.14053 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.212 Y72.590 F10800.000 ; move inwards before travel
G1 F8640
G1 X190.318 Y71.970 E-0.30695 ; wipe and retract
G1 X191.821 Y70.709 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X145.154 Y100.738 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X145.154 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E1.10219 ; perimeter
G1 X197.454 Y78.768 E1.37372 ; perimeter
G1 X197.756 Y78.477 E0.01727 ; perimeter
G1 X198.067 Y78.074 E0.02100 ; perimeter
G1 X198.284 Y77.684 E0.01837 ; perimeter
G1 X198.440 Y77.256 E0.01877 ; perimeter
G1 X198.524 Y76.811 E0.01864 ; perimeter
G1 X198.528 Y76.363 E0.01847 ; perimeter
G1 X198.448 Y75.925 E0.01834 ; perimeter
G1 X198.283 Y75.514 E0.01826 ; perimeter
G1 X198.055 Y75.175 E0.01685 ; perimeter
G1 X197.290 Y74.263 E0.04901 ; perimeter
G1 X197.798 Y73.837 E0.02729 ; perimeter
G1 X198.687 Y74.897 E0.05697 ; perimeter
G1 X198.916 Y75.225 E0.01649 ; perimeter
G1 X199.069 Y75.554 E0.01498 ; perimeter
G1 X199.169 Y75.912 E0.01529 ; perimeter
G1 X199.215 Y76.323 E0.01706 ; perimeter
G1 X199.192 Y76.774 E0.01859 ; perimeter
G1 X199.111 Y77.186 E0.01727 ; perimeter
G1 X198.979 Y77.581 E0.01720 ; perimeter
G1 X198.711 Y78.114 E0.02454 ; perimeter
G1 X198.507 Y78.426 E0.01539 ; perimeter
G1 X198.184 Y78.813 E0.02076 ; perimeter
G1 X197.802 Y79.175 E0.02168 ; perimeter
G1 X172.104 Y100.738 E1.38195 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X145.214 Y100.738 E0.82947 ; perimeter
M204 S1000 ; adjust acceleration
G1 X144.758 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X144.758 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E1.11257 ; perimeter
G1 X197.189 Y78.473 E1.36722 ; perimeter
G1 X197.460 Y78.212 E0.01552 ; perimeter
G1 X197.735 Y77.856 E0.01856 ; perimeter
G1 X197.922 Y77.519 E0.01587 ; perimeter
G1 X198.057 Y77.150 E0.01615 ; perimeter
G1 X198.128 Y76.773 E0.01584 ; perimeter
G1 X198.132 Y76.397 E0.01546 ; perimeter
G1 X198.066 Y76.036 E0.01513 ; perimeter
G1 X197.931 Y75.701 E0.01489 ; perimeter
G1 X197.738 Y75.413 E0.01426 ; perimeter
G1 X196.732 Y74.214 E0.06447 ; perimeter
G1 X197.847 Y73.279 E0.05995 ; perimeter
G1 X199.002 Y74.655 E0.07403 ; perimeter
G1 X199.260 Y75.026 E0.01862 ; perimeter
G1 X199.442 Y75.416 E0.01774 ; perimeter
G1 X199.559 Y75.836 E0.01795 ; perimeter
G1 X199.612 Y76.312 E0.01970 ; perimeter
G1 X199.586 Y76.822 E0.02107 ; perimeter
G1 X199.495 Y77.287 E0.01949 ; perimeter
G1 X199.346 Y77.734 E0.01943 ; perimeter
G1 X199.055 Y78.312 E0.02664 ; perimeter
G1 X198.826 Y78.662 E0.01726 ; perimeter
G1 X198.474 Y79.085 E0.02266 ; perimeter
G1 X198.065 Y79.471 E0.02314 ; perimeter
G1 X172.248 Y101.134 E1.38838 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X144.818 Y101.134 E0.82947 ; perimeter
M204 S1000 ; adjust acceleration
G1 X144.965 Y100.792 F10800.000 ; move inwards before travel
G1 F8640
G1 X144.758 Y99.806 E-0.30695 ; wipe and retract
G1 X146.720 Y99.806 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X166.843 Y100.714 ; move to first infill point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.061 Y101.496 E0.05566 ; infill
G1 X166.061 Y101.931 E0.02188 ; infill
G1 X166.312 Y101.931 E0.01260 ; infill
G1 X167.327 Y100.915 E0.07230 ; infill
G1 X168.012 Y100.915 E0.03448 ; infill
G1 X166.996 Y101.931 E0.07230 ; infill
G1 X167.681 Y101.931 E0.03448 ; infill
G1 X168.697 Y100.915 E0.07230 ; infill
G1 X169.382 Y100.915 E0.03448 ; infill
G1 X168.366 Y101.931 E0.07230 ; infill
G1 X169.051 Y101.931 E0.03448 ; infill
G1 X169.744 Y101.238 E0.04931 ; infill
G1 X169.744 Y101.923 E0.03448 ; infill
G1 X169.535 Y102.131 E0.01484 ; infill
G1 F8640
G1 X169.744 Y101.923 E-0.06809 ; wipe and retract
G1 X169.744 Y101.238 E-0.15815 ; wipe and retract
G1 X169.051 Y101.931 E-0.22616 ; wipe and retract
G1 X168.366 Y101.931 E-0.15815 ; wipe and retract
G1 X168.824 Y101.473 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X104.561 Y138.884 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.83194 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X51.913 Y117.321 E1.38195 ; perimeter
G1 X51.531 Y116.959 E0.02168 ; perimeter
G1 X51.210 Y116.574 E0.02066 ; perimeter
G1 X50.944 Y116.162 E0.02020 ; perimeter
G1 X50.738 Y115.733 E0.01962 ; perimeter
G1 X50.604 Y115.333 E0.01735 ; perimeter
G1 X50.516 Y114.868 E0.01950 ; perimeter
G1 X50.500 Y114.473 E0.01631 ; perimeter
G1 X50.546 Y114.058 E0.01719 ; perimeter
G1 X50.645 Y113.701 E0.01525 ; perimeter
G1 X50.807 Y113.358 E0.01565 ; perimeter
G1 X51.027 Y113.044 E0.01581 ; perimeter
G1 X51.917 Y111.983 E0.05701 ; perimeter
G1 X52.424 Y112.409 E0.02729 ; perimeter
G1 X51.660 Y113.321 E0.04901 ; perimeter
G1 X51.432 Y113.660 E0.01685 ; perimeter
G1 X51.266 Y114.071 E0.01826 ; perimeter
G1 X51.186 Y114.509 E0.01834 ; perimeter
G1 X51.191 Y114.958 E0.01847 ; perimeter
G1 X51.274 Y115.402 E0.01864 ; perimeter
G1 X51.431 Y115.830 E0.01877 ; perimeter
G1 X51.647 Y116.220 E0.01837 ; perimeter
G1 X51.959 Y116.623 E0.02100 ; perimeter
G1 X52.261 Y116.914 E0.01727 ; perimeter
G1 X77.806 Y138.349 E1.37372 ; perimeter
G1 X104.561 Y138.349 E1.10219 ; perimeter
G1 X104.561 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X104.957 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.83194 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03671 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X51.649 Y117.617 E1.38838 ; perimeter
G1 X51.241 Y117.231 E0.02314 ; perimeter
G1 X50.890 Y116.809 E0.02263 ; perimeter
G1 X50.598 Y116.356 E0.02221 ; perimeter
G1 X50.370 Y115.882 E0.02167 ; perimeter
G1 X50.220 Y115.434 E0.01948 ; perimeter
G1 X50.121 Y114.914 E0.02180 ; perimeter
G1 X50.102 Y114.459 E0.01875 ; perimeter
G1 X50.155 Y113.982 E0.01975 ; perimeter
G1 X50.272 Y113.563 E0.01794 ; perimeter
G1 X50.463 Y113.158 E0.01844 ; perimeter
G1 X50.713 Y112.802 E0.01792 ; perimeter
G1 X51.868 Y111.425 E0.07404 ; perimeter
G1 X52.983 Y112.360 E0.05995 ; perimeter
G1 X51.977 Y113.559 E0.06447 ; perimeter
G1 X51.784 Y113.847 E0.01426 ; perimeter
G1 X51.649 Y114.182 E0.01489 ; perimeter
G1 X51.583 Y114.543 E0.01513 ; perimeter
G1 X51.587 Y114.919 E0.01546 ; perimeter
G1 X51.658 Y115.297 E0.01584 ; perimeter
G1 X51.793 Y115.665 E0.01616 ; perimeter
G1 X51.979 Y116.002 E0.01587 ; perimeter
G1 X52.255 Y116.358 E0.01856 ; perimeter
G1 X52.526 Y116.619 E0.01552 ; perimeter
G1 X77.950 Y137.952 E1.36722 ; perimeter
G1 X104.957 Y137.952 E1.11257 ; perimeter
G1 X104.957 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X104.557 Y139.274 F10800.000 ; move inwards before travel
G1 F8640
G1 X101.666 Y139.230 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X83.445 Y140.278 ; move to first infill point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.654 Y140.069 E0.01484 ; infill
G1 X83.654 Y139.384 E0.03448 ; infill
G1 X82.961 Y140.077 E0.04931 ; infill
G1 X82.276 Y140.077 E0.03448 ; infill
G1 X83.292 Y139.061 E0.07230 ; infill
G1 X82.607 Y139.061 E0.03448 ; infill
G1 X81.591 Y140.077 E0.07230 ; infill
G1 X80.906 Y140.077 E0.03448 ; infill
G1 X81.922 Y139.061 E0.07230 ; infill
G1 X81.237 Y139.061 E0.03448 ; infill
G1 X80.221 Y140.077 E0.07230 ; infill
G1 X79.971 Y140.077 E0.01260 ; infill
G1 X79.971 Y139.642 E0.02188 ; infill
G1 X80.753 Y138.860 E0.05566 ; infill
G1 F8640
G1 X79.971 Y139.642 E-0.25530 ; wipe and retract
G1 X79.971 Y140.077 E-0.10036 ; wipe and retract
G1 X80.221 Y140.077 E-0.05779 ; wipe and retract
G1 X81.237 Y139.061 E-0.33164 ; wipe and retract
G1 X81.301 Y139.061 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X58.495 Y110.575 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X55.836 Y108.344 E0.14300 ; perimeter
G1 X53.387 Y111.263 E0.15696 ; perimeter
G1 X52.879 Y110.837 E0.02729 ; perimeter
G1 X61.876 Y100.114 E0.57663 ; perimeter
G1 X62.384 Y100.540 E0.02729 ; perimeter
G1 X59.935 Y103.459 E0.15696 ; perimeter
G1 X62.594 Y105.690 E0.14300 ; perimeter
G1 X62.250 Y106.100 E0.02205 ; perimeter
G1 X59.591 Y103.869 E0.14300 ; perimeter
G1 X56.180 Y107.934 E0.21861 ; perimeter
G1 X58.839 Y110.165 E0.14300 ; perimeter
G1 X58.533 Y110.530 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.544 Y111.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X55.884 Y108.903 E0.14300 ; perimeter
G1 X53.435 Y111.821 E0.15696 ; perimeter
G1 X52.321 Y110.886 E0.05995 ; perimeter
G1 X61.827 Y99.556 E0.60929 ; perimeter
G1 X62.942 Y100.491 E0.05995 ; perimeter
G1 X60.493 Y103.410 E0.15696 ; perimeter
G1 X63.152 Y105.641 E0.14300 ; perimeter
G1 X62.299 Y106.659 E0.05471 ; perimeter
G1 X59.640 Y104.427 E0.14300 ; perimeter
G1 X56.738 Y107.885 E0.18596 ; perimeter
G1 X59.397 Y110.117 E0.14300 ; perimeter
G1 X58.582 Y111.088 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.271 Y110.841 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.025 Y109.016 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X100.527 Y119.184 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.12213 ; perimeter
G1 X97.562 Y117.414 E0.07289 ; perimeter
G1 X100.527 Y117.414 E0.12213 ; perimeter
G1 X100.527 Y119.124 E0.07042 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.923 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.23140 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X66.611 Y99.813 E0.79819 ; perimeter
G1 X66.274 Y99.567 E0.01721 ; perimeter
G1 X65.840 Y99.336 E0.02021 ; perimeter
G1 X65.400 Y99.184 E0.01921 ; perimeter
G1 X64.951 Y99.103 E0.01879 ; perimeter
G1 X64.498 Y99.098 E0.01864 ; perimeter
G1 X64.056 Y99.172 E0.01847 ; perimeter
G1 X63.639 Y99.327 E0.01834 ; perimeter
G1 X63.425 Y99.460 E0.01039 ; perimeter
G1 X62.866 Y98.991 E0.03007 ; perimeter
G1 X63.166 Y98.779 E0.01512 ; perimeter
G1 X63.500 Y98.619 E0.01529 ; perimeter
G1 X63.901 Y98.502 E0.01719 ; perimeter
G1 X64.295 Y98.449 E0.01640 ; perimeter
G1 X64.698 Y98.451 E0.01661 ; perimeter
G1 X65.224 Y98.527 E0.02189 ; perimeter
G1 X65.747 Y98.687 E0.02250 ; perimeter
G1 X66.093 Y98.836 E0.01554 ; perimeter
G1 X66.466 Y99.046 E0.01764 ; perimeter
G1 X66.954 Y99.401 E0.02485 ; perimeter
G1 X81.649 Y111.732 E0.79025 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y117.018 E0.08349 ; perimeter
G1 X100.923 Y117.018 E0.15478 ; perimeter
G1 X100.923 Y119.520 E0.10307 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.319 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.25367 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X66.367 Y100.125 E0.80358 ; perimeter
G1 X66.063 Y99.903 E0.01550 ; perimeter
G1 X65.682 Y99.701 E0.01778 ; perimeter
G1 X65.299 Y99.568 E0.01666 ; perimeter
G1 X64.913 Y99.499 E0.01616 ; perimeter
G1 X64.529 Y99.495 E0.01584 ; perimeter
G1 X64.159 Y99.557 E0.01546 ; perimeter
G1 X63.814 Y99.684 E0.01513 ; perimeter
G1 X63.507 Y99.875 E0.01489 ; perimeter
G1 X63.412 Y99.967 E0.00544 ; perimeter
G1 X62.280 Y99.017 E0.06089 ; perimeter
G1 X62.612 Y98.683 E0.01940 ; perimeter
G1 X62.965 Y98.436 E0.01774 ; perimeter
G1 X63.358 Y98.248 E0.01795 ; perimeter
G1 X63.818 Y98.113 E0.01975 ; perimeter
G1 X64.270 Y98.052 E0.01878 ; perimeter
G1 X64.728 Y98.055 E0.01887 ; perimeter
G1 X65.311 Y98.139 E0.02427 ; perimeter
G1 X65.883 Y98.314 E0.02464 ; perimeter
G1 X66.269 Y98.480 E0.01731 ; perimeter
G1 X66.681 Y98.712 E0.01946 ; perimeter
G1 X67.198 Y99.089 E0.02635 ; perimeter
G1 X81.793 Y111.335 E0.78487 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y116.622 E0.08349 ; perimeter
G1 X101.319 Y116.622 E0.18744 ; perimeter
G1 X101.319 Y119.916 E0.13573 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.928 Y119.892 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.028 Y119.948 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X99.365 Y119.069 ; move to first infill point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7001.94
G1 X100.211 Y118.223 E0.06388 ; infill
G1 X100.211 Y117.730 E0.02634 ; infill
G1 X99.977 Y117.730 E0.01251 ; infill
G1 X98.839 Y118.868 E0.08595 ; infill
G1 X98.112 Y118.868 E0.03886 ; infill
G1 X99.249 Y117.730 E0.08595 ; infill
G1 X98.522 Y117.730 E0.03886 ; infill
G1 X97.677 Y118.575 E0.06387 ; infill
G1 F8640
G1 X98.522 Y117.730 E-0.27597 ; wipe and retract
G1 X99.249 Y117.730 E-0.16789 ; wipe and retract
G1 X98.281 Y118.698 E-0.31614 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X148.903 Y119.184 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X148.903 Y117.414 E0.07289 ; perimeter
G1 X151.868 Y117.414 E0.12213 ; perimeter
G1 X151.868 Y119.184 E0.07289 ; perimeter
G1 X148.963 Y119.184 E0.11966 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.507 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X148.507 Y117.018 E0.10555 ; perimeter
G1 X152.264 Y117.018 E0.15478 ; perimeter
G1 X152.264 Y119.045 E0.08349 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X182.478 Y99.399 E0.79038 ; perimeter
G1 X182.903 Y99.084 E0.02179 ; perimeter
G1 X183.218 Y98.901 E0.01501 ; perimeter
G1 X183.794 Y98.644 E0.02598 ; perimeter
G1 X184.247 Y98.517 E0.01937 ; perimeter
G1 X184.663 Y98.455 E0.01735 ; perimeter
G1 X185.137 Y98.449 E0.01950 ; perimeter
G1 X185.530 Y98.502 E0.01636 ; perimeter
G1 X185.904 Y98.610 E0.01602 ; perimeter
G1 X186.265 Y98.780 E0.01643 ; perimeter
G1 X186.564 Y98.991 E0.01507 ; perimeter
G1 X186.005 Y99.460 E0.03004 ; perimeter
G1 X185.791 Y99.327 E0.01039 ; perimeter
G1 X185.374 Y99.172 E0.01834 ; perimeter
G1 X184.931 Y99.098 E0.01847 ; perimeter
G1 X184.479 Y99.103 E0.01865 ; perimeter
G1 X184.025 Y99.185 E0.01898 ; perimeter
G1 X183.581 Y99.340 E0.01938 ; perimeter
G1 X183.193 Y99.543 E0.01804 ; perimeter
G1 X182.959 Y99.703 E0.01166 ; perimeter
G1 X167.976 Y112.267 E0.80554 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X148.567 Y119.580 E0.22892 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.110 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X148.110 Y116.622 E0.13820 ; perimeter
G1 X152.660 Y116.622 E0.18744 ; perimeter
G1 X152.660 Y118.648 E0.08349 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X182.233 Y99.088 E0.78492 ; perimeter
G1 X182.684 Y98.753 E0.02318 ; perimeter
G1 X183.037 Y98.547 E0.01681 ; perimeter
G1 X183.659 Y98.271 E0.02806 ; perimeter
G1 X184.163 Y98.129 E0.02157 ; perimeter
G1 X184.631 Y98.059 E0.01948 ; perimeter
G1 X185.160 Y98.053 E0.02180 ; perimeter
G1 X185.612 Y98.113 E0.01877 ; perimeter
G1 X186.044 Y98.238 E0.01854 ; perimeter
G1 X186.465 Y98.436 E0.01916 ; perimeter
G1 X186.830 Y98.694 E0.01841 ; perimeter
G1 X187.150 Y99.017 E0.01871 ; perimeter
G1 X186.017 Y99.967 E0.06089 ; perimeter
G1 X185.922 Y99.875 E0.00544 ; perimeter
G1 X185.616 Y99.684 E0.01489 ; perimeter
G1 X185.271 Y99.557 E0.01513 ; perimeter
G1 X184.901 Y99.495 E0.01546 ; perimeter
G1 X184.516 Y99.499 E0.01584 ; perimeter
G1 X184.126 Y99.569 E0.01632 ; perimeter
G1 X183.739 Y99.705 E0.01689 ; perimeter
G1 X183.398 Y99.884 E0.01589 ; perimeter
G1 X183.199 Y100.019 E0.00990 ; perimeter
G1 X168.120 Y112.663 E0.81067 ; perimeter
G1 X162.983 Y112.663 E0.21163 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X148.170 Y119.976 E0.25119 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.255 Y119.604 F10800.000 ; move inwards before travel
G1 F8640
G1 X148.111 Y116.686 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X149.018 Y118.575 ; move to first infill point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7001.94
G1 X149.863 Y117.730 E0.06387 ; infill
G1 X150.590 Y117.730 E0.03886 ; infill
G1 X149.453 Y118.868 E0.08595 ; infill
G1 X150.180 Y118.868 E0.03886 ; infill
G1 X151.317 Y117.730 E0.08595 ; infill
G1 X151.552 Y117.730 E0.01251 ; infill
G1 X151.552 Y118.223 E0.02634 ; infill
G1 X150.706 Y119.069 E0.06388 ; infill
G1 F8640
G1 X151.552 Y118.223 E-0.27601 ; wipe and retract
G1 X151.552 Y117.730 E-0.11383 ; wipe and retract
G1 X151.317 Y117.730 E-0.05406 ; wipe and retract
G1 X150.349 Y118.698 E-0.31610 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X190.935 Y110.575 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X190.591 Y110.165 E0.02205 ; perimeter
G1 X193.250 Y107.934 E0.14300 ; perimeter
G1 X189.839 Y103.869 E0.21861 ; perimeter
G1 X187.180 Y106.100 E0.14300 ; perimeter
G1 X186.836 Y105.690 E0.02205 ; perimeter
G1 X189.495 Y103.459 E0.14300 ; perimeter
G1 X187.046 Y100.540 E0.15696 ; perimeter
G1 X187.553 Y100.114 E0.02730 ; perimeter
G1 X196.551 Y110.837 E0.57663 ; perimeter
G1 X196.043 Y111.263 E0.02729 ; perimeter
G1 X193.594 Y108.344 E0.15696 ; perimeter
G1 X190.981 Y110.537 E0.14053 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.886 Y111.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X190.032 Y110.117 E0.05471 ; perimeter
G1 X192.692 Y107.885 E0.14300 ; perimeter
G1 X189.790 Y104.427 E0.18596 ; perimeter
G1 X187.131 Y106.659 E0.14300 ; perimeter
G1 X186.277 Y105.641 E0.05471 ; perimeter
G1 X188.936 Y103.410 E0.14300 ; perimeter
G1 X186.487 Y100.491 E0.15696 ; perimeter
G1 X187.602 Y99.556 E0.05995 ; perimeter
G1 X197.109 Y110.886 E0.60929 ; perimeter
G1 X195.994 Y111.821 E0.05995 ; perimeter
G1 X193.545 Y108.903 E0.15696 ; perimeter
G1 X190.932 Y111.095 E0.14053 ; perimeter
M204 S1000 ; adjust acceleration
G1 X190.927 Y110.736 F10800.000 ; move inwards before travel
G1 F8640
G1 X190.032 Y110.117 E-0.30695 ; wipe and retract
G1 X191.535 Y108.855 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X144.869 Y138.884 ; move to first perimeter point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X144.869 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E1.10219 ; perimeter
G1 X197.169 Y116.914 E1.37372 ; perimeter
G1 X197.471 Y116.623 E0.01727 ; perimeter
G1 X197.782 Y116.220 E0.02100 ; perimeter
G1 X197.998 Y115.830 E0.01837 ; perimeter
G1 X198.155 Y115.402 E0.01877 ; perimeter
G1 X198.239 Y114.958 E0.01864 ; perimeter
G1 X198.243 Y114.509 E0.01847 ; perimeter
G1 X198.163 Y114.071 E0.01834 ; perimeter
G1 X197.998 Y113.660 E0.01826 ; perimeter
G1 X197.770 Y113.321 E0.01685 ; perimeter
G1 X197.005 Y112.409 E0.04901 ; perimeter
G1 X197.513 Y111.983 E0.02729 ; perimeter
G1 X198.402 Y113.043 E0.05697 ; perimeter
G1 X198.630 Y113.371 E0.01649 ; perimeter
G1 X198.784 Y113.701 E0.01498 ; perimeter
G1 X198.884 Y114.058 E0.01529 ; perimeter
G1 X198.930 Y114.470 E0.01706 ; perimeter
G1 X198.906 Y114.920 E0.01859 ; perimeter
G1 X198.826 Y115.332 E0.01727 ; perimeter
G1 X198.694 Y115.728 E0.01720 ; perimeter
G1 X198.426 Y116.260 E0.02454 ; perimeter
G1 X198.221 Y116.572 E0.01539 ; perimeter
G1 X197.899 Y116.959 E0.02076 ; perimeter
G1 X197.516 Y117.321 E0.02168 ; perimeter
G1 X171.819 Y138.884 E1.38195 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X144.929 Y138.884 E0.82947 ; perimeter
M204 S1000 ; adjust acceleration
G1 X144.473 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X144.473 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E1.11257 ; perimeter
G1 X196.903 Y116.619 E1.36722 ; perimeter
G1 X197.175 Y116.358 E0.01552 ; perimeter
G1 X197.450 Y116.002 E0.01856 ; perimeter
G1 X197.637 Y115.665 E0.01587 ; perimeter
G1 X197.772 Y115.297 E0.01615 ; perimeter
G1 X197.843 Y114.919 E0.01584 ; perimeter
G1 X197.847 Y114.543 E0.01546 ; perimeter
G1 X197.781 Y114.182 E0.01513 ; perimeter
G1 X197.646 Y113.847 E0.01489 ; perimeter
G1 X197.453 Y113.559 E0.01426 ; perimeter
G1 X196.447 Y112.360 E0.06447 ; perimeter
G1 X197.562 Y111.425 E0.05995 ; perimeter
G1 X198.717 Y112.802 E0.07403 ; perimeter
G1 X198.975 Y113.172 E0.01862 ; perimeter
G1 X199.157 Y113.563 E0.01774 ; perimeter
G1 X199.274 Y113.982 E0.01795 ; perimeter
G1 X199.327 Y114.458 E0.01970 ; perimeter
G1 X199.301 Y114.969 E0.02107 ; perimeter
G1 X199.210 Y115.433 E0.01949 ; perimeter
G1 X199.061 Y115.880 E0.01943 ; perimeter
G1 X198.770 Y116.458 E0.02664 ; perimeter
G1 X198.540 Y116.808 E0.01726 ; perimeter
G1 X198.188 Y117.231 E0.02266 ; perimeter
G1 X197.780 Y117.617 E0.02314 ; perimeter
G1 X171.963 Y139.280 E1.38838 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X144.533 Y139.280 E0.82947 ; perimeter
M204 S1000 ; adjust acceleration
G1 X144.680 Y138.938 F10800.000 ; move inwards before travel
G1 F8640
G1 X144.473 Y137.952 E-0.30695 ; wipe and retract
G1 X146.435 Y137.952 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
G1 X166.558 Y138.860 ; move to first infill point
G1 Z11.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.776 Y139.642 E0.05566 ; infill
G1 X165.776 Y140.077 E0.02188 ; infill
G1 X166.026 Y140.077 E0.01260 ; infill
G1 X167.042 Y139.061 E0.07230 ; infill
G1 X167.727 Y139.061 E0.03448 ; infill
G1 X166.711 Y140.077 E0.07230 ; infill
G1 X167.396 Y140.077 E0.03448 ; infill
G1 X168.412 Y139.061 E0.07230 ; infill
G1 X169.097 Y139.061 E0.03448 ; infill
G1 X168.081 Y140.077 E0.07230 ; infill
G1 X168.766 Y140.077 E0.03448 ; infill
G1 X169.459 Y139.384 E0.04931 ; infill
G1 X169.459 Y140.069 E0.03448 ; infill
G1 X169.250 Y140.278 E0.01484 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;11.25


G1 F8640
G1 X169.459 Y140.069 E-0.06809 ; wipe and retract
G1 X169.459 Y139.384 E-0.15815 ; wipe and retract
G1 X168.766 Y140.077 E-0.22616 ; wipe and retract
G1 X168.081 Y140.077 E-0.15815 ; wipe and retract
G1 X168.539 Y139.619 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;11.25
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X104.419 Y100.738 ; move to first perimeter point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.81435 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X52.064 Y79.062 E1.38917 ; perimeter
G1 X51.682 Y78.701 E0.02165 ; perimeter
G1 X51.362 Y78.317 E0.02063 ; perimeter
G1 X51.096 Y77.905 E0.02017 ; perimeter
G1 X50.890 Y77.477 E0.01958 ; perimeter
G1 X50.754 Y77.070 E0.01769 ; perimeter
G1 X50.667 Y76.614 E0.01912 ; perimeter
G1 X50.651 Y76.211 E0.01661 ; perimeter
G1 X50.696 Y75.804 E0.01688 ; perimeter
G1 X50.797 Y75.441 E0.01550 ; perimeter
G1 X50.956 Y75.103 E0.01541 ; perimeter
G1 X51.179 Y74.785 E0.01600 ; perimeter
G1 X52.068 Y73.725 E0.05700 ; perimeter
G1 X52.576 Y74.151 E0.02729 ; perimeter
G1 X51.811 Y75.062 E0.04901 ; perimeter
G1 X51.583 Y75.402 E0.01685 ; perimeter
G1 X51.417 Y75.813 E0.01826 ; perimeter
G1 X51.338 Y76.251 E0.01834 ; perimeter
G1 X51.342 Y76.699 E0.01847 ; perimeter
G1 X51.425 Y77.144 E0.01864 ; perimeter
G1 X51.583 Y77.573 E0.01884 ; perimeter
G1 X51.808 Y77.977 E0.01907 ; perimeter
G1 X52.100 Y78.354 E0.01962 ; perimeter
G1 X52.412 Y78.655 E0.01787 ; perimeter
G1 X78.091 Y100.203 E1.38095 ; perimeter
G1 X104.417 Y100.203 E1.08452 ; perimeter
G1 X104.419 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X104.817 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.81441 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03671 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X51.800 Y79.358 E1.39559 ; perimeter
G1 X51.393 Y78.973 E0.02311 ; perimeter
G1 X51.042 Y78.552 E0.02259 ; perimeter
G1 X50.750 Y78.100 E0.02217 ; perimeter
G1 X50.522 Y77.627 E0.02163 ; perimeter
G1 X50.369 Y77.170 E0.01983 ; perimeter
G1 X50.273 Y76.659 E0.02142 ; perimeter
G1 X50.253 Y76.197 E0.01905 ; perimeter
G1 X50.305 Y75.728 E0.01944 ; perimeter
G1 X50.424 Y75.303 E0.01819 ; perimeter
G1 X50.611 Y74.903 E0.01819 ; perimeter
G1 X50.864 Y74.543 E0.01812 ; perimeter
G1 X52.019 Y73.166 E0.07404 ; perimeter
G1 X53.134 Y74.102 E0.05995 ; perimeter
M73 P52 R64
G1 X52.128 Y75.301 E0.06447 ; perimeter
G1 X51.935 Y75.588 E0.01426 ; perimeter
G1 X51.800 Y75.923 E0.01489 ; perimeter
G1 X51.734 Y76.285 E0.01513 ; perimeter
G1 X51.738 Y76.660 E0.01546 ; perimeter
G1 X51.809 Y77.038 E0.01584 ; perimeter
G1 X51.945 Y77.407 E0.01621 ; perimeter
G1 X52.140 Y77.758 E0.01655 ; perimeter
G1 X52.396 Y78.089 E0.01721 ; perimeter
G1 X52.677 Y78.361 E0.01612 ; perimeter
G1 X78.235 Y99.806 E1.37443 ; perimeter
M73 Q52 S66
G1 X104.812 Y99.806 E1.09484 ; perimeter
G1 X104.816 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X104.417 Y101.128 F10800.000 ; move inwards before travel
G1 F8640
G1 X101.525 Y101.084 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X84.140 Y101.697 ; move to first infill point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.358 Y100.915 E0.05567 ; infill
G1 X82.673 Y100.915 E0.03448 ; infill
G1 X83.688 Y101.931 E0.07230 ; infill
G1 X83.003 Y101.931 E0.03448 ; infill
G1 X81.988 Y100.915 E0.07230 ; infill
G1 X81.303 Y100.915 E0.03448 ; infill
G1 X82.318 Y101.931 E0.07230 ; infill
G1 X81.634 Y101.931 E0.03448 ; infill
G1 X80.618 Y100.915 E0.07230 ; infill
G1 X80.256 Y100.915 E0.01821 ; infill
G1 X80.256 Y101.238 E0.01627 ; infill
G1 X80.949 Y101.931 E0.04930 ; infill
G1 X80.264 Y101.931 E0.03448 ; infill
G1 X80.055 Y101.722 E0.01483 ; infill
G1 F8640
G1 X80.264 Y101.931 E-0.06804 ; wipe and retract
G1 X80.949 Y101.931 E-0.15815 ; wipe and retract
G1 X80.256 Y101.238 E-0.22612 ; wipe and retract
G1 X80.256 Y100.915 E-0.07462 ; wipe and retract
G1 X80.618 Y100.915 E-0.08353 ; wipe and retract
G1 X81.076 Y101.373 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X58.641 Y72.313 ; move to first perimeter point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X55.987 Y70.086 E0.14273 ; perimeter
G1 X53.538 Y73.004 E0.15696 ; perimeter
G1 X53.030 Y72.578 E0.02729 ; perimeter
G1 X62.027 Y61.856 E0.57663 ; perimeter
G1 X62.535 Y62.282 E0.02729 ; perimeter
G1 X60.086 Y65.200 E0.15696 ; perimeter
G1 X62.740 Y67.427 E0.14273 ; perimeter
G1 X62.396 Y67.837 E0.02205 ; perimeter
G1 X59.742 Y65.610 E0.14273 ; perimeter
G1 X56.331 Y69.675 E0.21861 ; perimeter
G1 X58.985 Y71.903 E0.14273 ; perimeter
G1 X58.679 Y72.267 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.690 Y72.871 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X56.035 Y70.644 E0.14273 ; perimeter
G1 X53.586 Y73.563 E0.15696 ; perimeter
G1 X52.472 Y72.627 E0.05995 ; perimeter
G1 X61.979 Y61.297 E0.60929 ; perimeter
G1 X63.093 Y62.233 E0.05995 ; perimeter
G1 X60.644 Y65.151 E0.15696 ; perimeter
G1 X63.298 Y67.378 E0.14273 ; perimeter
G1 X62.445 Y68.396 E0.05471 ; perimeter
G1 X59.791 Y66.169 E0.14273 ; perimeter
G1 X56.889 Y69.627 E0.18596 ; perimeter
G1 X59.543 Y71.854 E0.14273 ; perimeter
G1 X58.728 Y72.825 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.417 Y72.578 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.171 Y70.753 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X100.562 Y81.038 ; move to first perimeter point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.11183 ; perimeter
G1 X97.847 Y79.093 E0.08010 ; perimeter
G1 X100.562 Y79.093 E0.11183 ; perimeter
G1 X100.562 Y80.978 E0.07763 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.958 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.22110 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X66.762 Y61.554 E0.80543 ; perimeter
G1 X66.411 Y61.299 E0.01787 ; perimeter
G1 X65.989 Y61.077 E0.01962 ; perimeter
G1 X65.552 Y60.925 E0.01907 ; perimeter
G1 X65.102 Y60.845 E0.01884 ; perimeter
G1 X64.649 Y60.839 E0.01864 ; perimeter
G1 X64.207 Y60.913 E0.01847 ; perimeter
G1 X63.790 Y61.068 E0.01834 ; perimeter
G1 X63.576 Y61.201 E0.01039 ; perimeter
G1 X63.016 Y60.732 E0.03008 ; perimeter
G1 X63.316 Y60.521 E0.01508 ; perimeter
G1 X63.656 Y60.359 E0.01551 ; perimeter
G1 X64.049 Y60.244 E0.01688 ; perimeter
G1 X64.450 Y60.190 E0.01668 ; perimeter
G1 X64.861 Y60.193 E0.01693 ; perimeter
G1 X65.370 Y60.267 E0.02118 ; perimeter
G1 X65.882 Y60.422 E0.02204 ; perimeter
G1 X66.246 Y60.578 E0.01630 ; perimeter
G1 X66.626 Y60.793 E0.01798 ; perimeter
G1 X67.104 Y61.142 E0.02442 ; perimeter
G1 X81.934 Y73.586 E0.79748 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y78.697 E0.09071 ; perimeter
G1 X100.958 Y78.697 E0.14449 ; perimeter
G1 X100.958 Y81.374 E0.11029 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.355 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.24337 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X66.518 Y61.866 E0.81080 ; perimeter
G1 X66.201 Y61.636 E0.01612 ; perimeter
G1 X65.831 Y61.442 E0.01721 ; perimeter
G1 X65.452 Y61.310 E0.01655 ; perimeter
G1 X65.064 Y61.241 E0.01621 ; perimeter
G1 X64.680 Y61.236 E0.01584 ; perimeter
G1 X64.310 Y61.298 E0.01546 ; perimeter
G1 X63.965 Y61.426 E0.01513 ; perimeter
G1 X63.658 Y61.617 E0.01489 ; perimeter
G1 X63.563 Y61.708 E0.00544 ; perimeter
G1 X62.431 Y60.758 E0.06089 ; perimeter
G1 X62.759 Y60.428 E0.01915 ; perimeter
G1 X63.115 Y60.178 E0.01794 ; perimeter
G1 X63.514 Y59.987 E0.01819 ; perimeter
G1 X63.966 Y59.855 E0.01944 ; perimeter
G1 X64.425 Y59.793 E0.01907 ; perimeter
G1 X64.891 Y59.797 E0.01920 ; perimeter
G1 X65.456 Y59.879 E0.02352 ; perimeter
G1 X66.018 Y60.049 E0.02417 ; perimeter
G1 X66.422 Y60.222 E0.01811 ; perimeter
G1 X66.841 Y60.459 E0.01982 ; perimeter
G1 X67.349 Y60.830 E0.02592 ; perimeter
G1 X82.078 Y73.189 E0.79209 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y78.300 E0.09071 ; perimeter
G1 X101.355 Y78.300 E0.17714 ; perimeter
G1 X101.355 Y81.770 E0.14294 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.965 Y81.739 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.063 Y81.804 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X100.447 Y80.236 ; move to first infill point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7124.33
G1 X99.620 Y79.409 E0.06139 ; infill
G1 X98.906 Y79.409 E0.03753 ; infill
G1 X100.218 Y80.722 E0.09748 ; infill
G1 X99.503 Y80.722 E0.03753 ; infill
G1 X98.191 Y79.409 E0.09748 ; infill
G1 X98.163 Y79.409 E0.00146 ; infill
G1 X98.163 Y80.096 E0.03608 ; infill
G1 X98.990 Y80.922 E0.06138 ; infill
G1 F8640
G1 X98.163 Y80.096 E-0.26985 ; wipe and retract
G1 X98.163 Y79.409 E-0.15861 ; wipe and retract
G1 X98.191 Y79.409 E-0.00640 ; wipe and retract
G1 X99.187 Y80.405 E-0.32515 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X76.140 Y91.969 ; move to first perimeter point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.550 Y92.314 E0.78590 ; perimeter
G1 X76.186 Y92.008 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X149.438 Y81.038 ; move to first perimeter point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.438 Y79.093 E0.08010 ; perimeter
G1 X152.153 Y79.093 E0.11183 ; perimeter
G1 X152.153 Y81.038 E0.08010 ; perimeter
G1 X149.498 Y81.038 E0.10936 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.042 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X149.042 Y78.697 E0.11276 ; perimeter
G1 X152.549 Y78.697 E0.14449 ; perimeter
G1 X152.549 Y80.899 E0.09071 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X182.898 Y61.141 E0.79759 ; perimeter
G1 X183.321 Y60.826 E0.02173 ; perimeter
G1 X183.653 Y60.633 E0.01580 ; perimeter
G1 X184.210 Y60.387 E0.02512 ; perimeter
G1 X184.663 Y60.259 E0.01936 ; perimeter
G1 X185.087 Y60.196 E0.01769 ; perimeter
G1 X185.551 Y60.190 E0.01912 ; perimeter
G1 X185.952 Y60.244 E0.01664 ; perimeter
G1 X186.331 Y60.354 E0.01625 ; perimeter
G1 X186.685 Y60.522 E0.01614 ; perimeter
G1 X186.983 Y60.732 E0.01505 ; perimeter
G1 X186.424 Y61.201 E0.03006 ; perimeter
G1 X186.210 Y61.068 E0.01039 ; perimeter
G1 X185.793 Y60.913 E0.01834 ; perimeter
G1 X185.351 Y60.839 E0.01847 ; perimeter
G1 X184.898 Y60.845 E0.01864 ; perimeter
G1 X184.448 Y60.925 E0.01884 ; perimeter
G1 X184.012 Y61.076 E0.01902 ; perimeter
G1 X183.609 Y61.287 E0.01873 ; perimeter
G1 X183.375 Y61.448 E0.01169 ; perimeter
G1 X168.261 Y74.121 E0.81253 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X149.102 Y81.434 E0.21862 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.645 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X148.645 Y78.300 E0.14541 ; perimeter
G1 X152.945 Y78.300 E0.17714 ; perimeter
G1 X152.945 Y80.502 E0.09071 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X182.652 Y60.829 E0.79213 ; perimeter
G1 X183.103 Y60.494 E0.02314 ; perimeter
G1 X183.472 Y60.280 E0.01762 ; perimeter
G1 X184.076 Y60.013 E0.02718 ; perimeter
G1 X184.579 Y59.871 E0.02155 ; perimeter
G1 X185.055 Y59.800 E0.01983 ; perimeter
G1 X185.575 Y59.794 E0.02142 ; perimeter
G1 X186.034 Y59.855 E0.01906 ; perimeter
G1 X186.472 Y59.982 E0.01879 ; perimeter
G1 X186.885 Y60.178 E0.01884 ; perimeter
G1 X187.246 Y60.432 E0.01818 ; perimeter
G1 X187.569 Y60.758 E0.01891 ; perimeter
G1 X186.437 Y61.708 E0.06089 ; perimeter
G1 X186.342 Y61.617 E0.00544 ; perimeter
G1 X186.035 Y61.426 E0.01489 ; perimeter
G1 X185.690 Y61.298 E0.01513 ; perimeter
G1 X185.320 Y61.236 E0.01546 ; perimeter
G1 X184.936 Y61.241 E0.01584 ; perimeter
G1 X184.548 Y61.310 E0.01621 ; perimeter
G1 X184.169 Y61.441 E0.01653 ; perimeter
G1 X183.813 Y61.627 E0.01654 ; perimeter
G1 X183.615 Y61.764 E0.00993 ; perimeter
G1 X168.405 Y74.517 E0.81768 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X148.705 Y81.830 E0.24090 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.790 Y81.457 F10800.000 ; move inwards before travel
G1 F8640
G1 X148.649 Y78.539 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X150.580 Y80.922 ; move to first infill point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7124.34
G1 X149.754 Y80.096 E0.06138 ; infill
G1 X149.754 Y79.409 E0.03608 ; infill
G1 X149.782 Y79.409 E0.00146 ; infill
G1 X151.094 Y80.722 E0.09748 ; infill
G1 X151.809 Y80.722 E0.03753 ; infill
G1 X150.496 Y79.409 E0.09748 ; infill
G1 X151.211 Y79.409 E0.03753 ; infill
G1 X152.038 Y80.236 E0.06139 ; infill
G1 F8640
G1 X151.211 Y79.409 E-0.26989 ; wipe and retract
G1 X150.496 Y79.409 E-0.16501 ; wipe and retract
G1 X151.492 Y80.405 E-0.32510 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X191.359 Y72.313 ; move to first perimeter point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X191.015 Y71.903 E0.02205 ; perimeter
G1 X193.669 Y69.675 E0.14273 ; perimeter
G1 X190.258 Y65.610 E0.21861 ; perimeter
G1 X187.604 Y67.837 E0.14273 ; perimeter
G1 X187.260 Y67.427 E0.02205 ; perimeter
G1 X189.914 Y65.200 E0.14273 ; perimeter
G1 X187.465 Y62.282 E0.15696 ; perimeter
G1 X187.973 Y61.856 E0.02730 ; perimeter
G1 X196.970 Y72.578 E0.57663 ; perimeter
G1 X196.462 Y73.004 E0.02729 ; perimeter
G1 X194.013 Y70.086 E0.15696 ; perimeter
G1 X191.405 Y72.274 E0.14026 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.310 Y72.871 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X190.457 Y71.854 E0.05471 ; perimeter
G1 X193.111 Y69.627 E0.14273 ; perimeter
G1 X190.209 Y66.169 E0.18596 ; perimeter
G1 X187.555 Y68.396 E0.14273 ; perimeter
G1 X186.702 Y67.378 E0.05471 ; perimeter
G1 X189.356 Y65.151 E0.14273 ; perimeter
G1 X186.907 Y62.233 E0.15696 ; perimeter
G1 X188.021 Y61.297 E0.05995 ; perimeter
G1 X197.528 Y72.627 E0.60929 ; perimeter
G1 X196.414 Y73.563 E0.05995 ; perimeter
G1 X193.964 Y70.644 E0.15696 ; perimeter
G1 X191.356 Y72.832 E0.14026 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.352 Y72.473 F10800.000 ; move inwards before travel
G1 F8640
G1 X190.457 Y71.854 E-0.30695 ; wipe and retract
G1 X191.960 Y70.592 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X145.581 Y100.738 ; move to first perimeter point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X145.583 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E1.08452 ; perimeter
G1 X197.588 Y78.655 E1.38095 ; perimeter
G1 X197.900 Y78.354 E0.01787 ; perimeter
G1 X198.192 Y77.977 E0.01962 ; perimeter
G1 X198.417 Y77.573 E0.01907 ; perimeter
G1 X198.575 Y77.144 E0.01884 ; perimeter
G1 X198.658 Y76.699 E0.01864 ; perimeter
G1 X198.662 Y76.251 E0.01847 ; perimeter
G1 X198.583 Y75.813 E0.01834 ; perimeter
G1 X198.417 Y75.402 E0.01826 ; perimeter
G1 X198.189 Y75.062 E0.01685 ; perimeter
G1 X197.424 Y74.151 E0.04901 ; perimeter
G1 X197.932 Y73.725 E0.02729 ; perimeter
G1 X198.821 Y74.784 E0.05699 ; perimeter
G1 X199.047 Y75.108 E0.01624 ; perimeter
G1 X199.203 Y75.441 E0.01517 ; perimeter
G1 X199.304 Y75.804 E0.01551 ; perimeter
G1 X199.349 Y76.209 E0.01679 ; perimeter
G1 X199.328 Y76.650 E0.01821 ; perimeter
G1 X199.247 Y77.069 E0.01756 ; perimeter
G1 X199.112 Y77.473 E0.01755 ; perimeter
G1 X198.854 Y77.987 E0.02367 ; perimeter
G1 X198.639 Y78.315 E0.01618 ; perimeter
G1 X198.318 Y78.701 E0.02071 ; perimeter
G1 X197.936 Y79.062 E0.02165 ; perimeter
G1 X172.104 Y100.738 E1.38917 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X145.641 Y100.738 E0.81187 ; perimeter
M204 S1000 ; adjust acceleration
G1 X145.183 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X145.188 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E1.09484 ; perimeter
G1 X197.323 Y78.361 E1.37443 ; perimeter
G1 X197.604 Y78.089 E0.01612 ; perimeter
G1 X197.860 Y77.758 E0.01721 ; perimeter
G1 X198.055 Y77.407 E0.01655 ; perimeter
G1 X198.191 Y77.038 E0.01621 ; perimeter
G1 X198.262 Y76.660 E0.01584 ; perimeter
G1 X198.266 Y76.285 E0.01546 ; perimeter
G1 X198.200 Y75.923 E0.01513 ; perimeter
G1 X198.065 Y75.588 E0.01489 ; perimeter
G1 X197.872 Y75.301 E0.01426 ; perimeter
G1 X196.866 Y74.102 E0.06447 ; perimeter
G1 X197.981 Y73.166 E0.05995 ; perimeter
G1 X199.136 Y74.543 E0.07403 ; perimeter
G1 X199.391 Y74.908 E0.01837 ; perimeter
G1 X199.576 Y75.303 E0.01794 ; perimeter
G1 X199.695 Y75.728 E0.01819 ; perimeter
G1 X199.747 Y76.197 E0.01941 ; perimeter
G1 X199.722 Y76.698 E0.02068 ; perimeter
G1 X199.631 Y77.170 E0.01980 ; perimeter
G1 X199.479 Y77.625 E0.01978 ; perimeter
G1 X199.199 Y78.184 E0.02577 ; perimeter
G1 X198.959 Y78.551 E0.01807 ; perimeter
G1 X198.607 Y78.973 E0.02262 ; perimeter
G1 X198.200 Y79.358 E0.02311 ; perimeter
G1 X172.248 Y101.134 E1.39559 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X145.243 Y101.134 E0.81194 ; perimeter
M204 S1000 ; adjust acceleration
G1 X145.392 Y100.793 F10800.000 ; move inwards before travel
G1 F8640
G1 X145.188 Y99.806 E-0.30690 ; wipe and retract
G1 X147.151 Y99.806 E-0.45310 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X165.860 Y101.722 ; move to first infill point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.069 Y101.931 E0.01484 ; infill
G1 X166.754 Y101.931 E0.03448 ; infill
G1 X166.061 Y101.238 E0.04930 ; infill
G1 X166.061 Y100.915 E0.01627 ; infill
G1 X166.423 Y100.915 E0.01821 ; infill
G1 X167.439 Y101.931 E0.07230 ; infill
G1 X168.124 Y101.931 E0.03448 ; infill
G1 X167.108 Y100.915 E0.07230 ; infill
G1 X167.793 Y100.915 E0.03448 ; infill
G1 X168.808 Y101.931 E0.07230 ; infill
G1 X169.493 Y101.931 E0.03448 ; infill
G1 X168.478 Y100.915 E0.07230 ; infill
G1 X169.163 Y100.915 E0.03448 ; infill
G1 X169.945 Y101.697 E0.05567 ; infill
G1 F8640
G1 X169.163 Y100.915 E-0.25535 ; wipe and retract
G1 X168.478 Y100.915 E-0.15815 ; wipe and retract
G1 X169.493 Y101.931 E-0.33164 ; wipe and retract
G1 X169.429 Y101.931 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X104.134 Y138.884 ; move to first perimeter point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.81435 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X51.779 Y117.209 E1.38917 ; perimeter
G1 X51.397 Y116.848 E0.02165 ; perimeter
G1 X51.077 Y116.463 E0.02063 ; perimeter
G1 X50.811 Y116.052 E0.02017 ; perimeter
G1 X50.605 Y115.623 E0.01958 ; perimeter
G1 X50.469 Y115.216 E0.01769 ; perimeter
G1 X50.382 Y114.760 E0.01912 ; perimeter
G1 X50.365 Y114.357 E0.01661 ; perimeter
G1 X50.411 Y113.950 E0.01688 ; perimeter
G1 X50.512 Y113.587 E0.01550 ; perimeter
G1 X50.671 Y113.249 E0.01541 ; perimeter
G1 X50.893 Y112.931 E0.01600 ; perimeter
G1 X51.783 Y111.871 E0.05700 ; perimeter
G1 X52.290 Y112.297 E0.02729 ; perimeter
G1 X51.526 Y113.208 E0.04901 ; perimeter
G1 X51.298 Y113.548 E0.01685 ; perimeter
G1 X51.132 Y113.959 E0.01826 ; perimeter
G1 X51.052 Y114.397 E0.01834 ; perimeter
G1 X51.056 Y114.845 E0.01847 ; perimeter
G1 X51.140 Y115.290 E0.01864 ; perimeter
G1 X51.298 Y115.719 E0.01884 ; perimeter
G1 X51.523 Y116.124 E0.01907 ; perimeter
G1 X51.815 Y116.500 E0.01962 ; perimeter
G1 X52.127 Y116.801 E0.01787 ; perimeter
G1 X77.806 Y138.349 E1.38095 ; perimeter
G1 X104.132 Y138.349 E1.08452 ; perimeter
G1 X104.133 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X104.532 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.81441 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03671 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X51.515 Y117.505 E1.39559 ; perimeter
G1 X51.108 Y117.119 E0.02311 ; perimeter
G1 X50.757 Y116.698 E0.02259 ; perimeter
G1 X50.465 Y116.246 E0.02217 ; perimeter
G1 X50.237 Y115.773 E0.02163 ; perimeter
G1 X50.084 Y115.316 E0.01983 ; perimeter
G1 X49.987 Y114.805 E0.02142 ; perimeter
G1 X49.968 Y114.343 E0.01905 ; perimeter
G1 X50.020 Y113.874 E0.01944 ; perimeter
G1 X50.139 Y113.449 E0.01819 ; perimeter
G1 X50.326 Y113.049 E0.01819 ; perimeter
G1 X50.579 Y112.689 E0.01812 ; perimeter
G1 X51.734 Y111.313 E0.07404 ; perimeter
G1 X52.849 Y112.248 E0.05995 ; perimeter
G1 X51.843 Y113.447 E0.06447 ; perimeter
G1 X51.650 Y113.734 E0.01426 ; perimeter
G1 X51.515 Y114.069 E0.01489 ; perimeter
G1 X51.449 Y114.431 E0.01513 ; perimeter
G1 X51.452 Y114.806 E0.01546 ; perimeter
G1 X51.524 Y115.184 E0.01584 ; perimeter
G1 X51.659 Y115.553 E0.01621 ; perimeter
G1 X51.855 Y115.905 E0.01655 ; perimeter
G1 X52.111 Y116.235 E0.01721 ; perimeter
G1 X52.392 Y116.507 E0.01612 ; perimeter
G1 X77.950 Y137.952 E1.37443 ; perimeter
G1 X104.526 Y137.952 E1.09484 ; perimeter
G1 X104.531 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X104.132 Y139.274 F10800.000 ; move inwards before travel
G1 F8640
G1 X101.240 Y139.230 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X83.854 Y139.843 ; move to first infill point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.072 Y139.061 E0.05567 ; infill
G1 X82.388 Y139.061 E0.03448 ; infill
G1 X83.403 Y140.077 E0.07230 ; infill
G1 X82.718 Y140.077 E0.03448 ; infill
G1 X81.703 Y139.061 E0.07230 ; infill
G1 X81.018 Y139.061 E0.03448 ; infill
G1 X82.033 Y140.077 E0.07230 ; infill
G1 X81.348 Y140.077 E0.03448 ; infill
G1 X80.333 Y139.061 E0.07230 ; infill
G1 X79.971 Y139.061 E0.01821 ; infill
G1 X79.971 Y139.384 E0.01627 ; infill
G1 X80.663 Y140.077 E0.04930 ; infill
G1 X79.978 Y140.077 E0.03448 ; infill
G1 X79.770 Y139.868 E0.01483 ; infill
G1 F8640
G1 X79.978 Y140.077 E-0.06804 ; wipe and retract
G1 X80.663 Y140.077 E-0.15815 ; wipe and retract
G1 X79.971 Y139.384 E-0.22612 ; wipe and retract
G1 X79.971 Y139.061 E-0.07462 ; wipe and retract
G1 X80.333 Y139.061 E-0.08353 ; wipe and retract
G1 X80.791 Y139.519 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X58.356 Y110.459 ; move to first perimeter point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X55.701 Y108.232 E0.14273 ; perimeter
G1 X53.252 Y111.150 E0.15696 ; perimeter
G1 X52.745 Y110.724 E0.02729 ; perimeter
G1 X61.742 Y100.002 E0.57663 ; perimeter
G1 X62.250 Y100.428 E0.02729 ; perimeter
G1 X59.801 Y103.346 E0.15696 ; perimeter
G1 X62.455 Y105.573 E0.14273 ; perimeter
G1 X62.111 Y105.983 E0.02205 ; perimeter
G1 X59.457 Y103.756 E0.14273 ; perimeter
G1 X56.046 Y107.822 E0.21861 ; perimeter
G1 X58.700 Y110.049 E0.14273 ; perimeter
G1 X58.394 Y110.413 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.404 Y111.017 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X55.750 Y108.790 E0.14273 ; perimeter
G1 X53.301 Y111.709 E0.15696 ; perimeter
G1 X52.187 Y110.773 E0.05995 ; perimeter
G1 X61.693 Y99.443 E0.60929 ; perimeter
G1 X62.808 Y100.379 E0.05995 ; perimeter
G1 X60.359 Y103.298 E0.15696 ; perimeter
G1 X63.013 Y105.525 E0.14273 ; perimeter
G1 X62.160 Y106.542 E0.05471 ; perimeter
G1 X59.505 Y104.315 E0.14273 ; perimeter
G1 X56.604 Y107.773 E0.18596 ; perimeter
G1 X59.258 Y110.000 E0.14273 ; perimeter
G1 X58.443 Y110.971 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.132 Y110.725 F10800.000 ; move inwards before travel
G1 F8640
G1 X55.885 Y108.899 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X100.277 Y119.184 ; move to first perimeter point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.11183 ; perimeter
G1 X97.562 Y117.239 E0.08010 ; perimeter
G1 X100.277 Y117.239 E0.11183 ; perimeter
G1 X100.277 Y119.124 E0.07763 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.673 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.22110 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X66.477 Y99.700 E0.80543 ; perimeter
G1 X66.126 Y99.445 E0.01787 ; perimeter
G1 X65.704 Y99.223 E0.01962 ; perimeter
G1 X65.267 Y99.072 E0.01907 ; perimeter
G1 X64.817 Y98.991 E0.01884 ; perimeter
G1 X64.364 Y98.986 E0.01864 ; perimeter
G1 X63.922 Y99.059 E0.01847 ; perimeter
G1 X63.505 Y99.214 E0.01834 ; perimeter
G1 X63.291 Y99.347 E0.01039 ; perimeter
G1 X62.731 Y98.878 E0.03008 ; perimeter
G1 X63.031 Y98.667 E0.01508 ; perimeter
G1 X63.370 Y98.505 E0.01551 ; perimeter
G1 X63.764 Y98.390 E0.01688 ; perimeter
G1 X64.165 Y98.336 E0.01668 ; perimeter
G1 X64.576 Y98.339 E0.01693 ; perimeter
G1 X65.085 Y98.413 E0.02118 ; perimeter
G1 X65.597 Y98.568 E0.02204 ; perimeter
G1 X65.961 Y98.724 E0.01630 ; perimeter
G1 X66.340 Y98.939 E0.01798 ; perimeter
G1 X66.819 Y99.288 E0.02442 ; perimeter
G1 X81.649 Y111.732 E0.79748 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y116.843 E0.09071 ; perimeter
G1 X100.673 Y116.843 E0.14449 ; perimeter
G1 X100.673 Y119.520 E0.11029 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.069 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.24337 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X66.233 Y100.012 E0.81080 ; perimeter
G1 X65.916 Y99.782 E0.01612 ; perimeter
G1 X65.546 Y99.588 E0.01721 ; perimeter
G1 X65.166 Y99.456 E0.01655 ; perimeter
G1 X64.779 Y99.387 E0.01621 ; perimeter
G1 X64.395 Y99.382 E0.01584 ; perimeter
G1 X64.024 Y99.444 E0.01546 ; perimeter
G1 X63.680 Y99.572 E0.01513 ; perimeter
G1 X63.373 Y99.763 E0.01489 ; perimeter
G1 X63.278 Y99.854 E0.00544 ; perimeter
G1 X62.146 Y98.904 E0.06089 ; perimeter
G1 X62.474 Y98.574 E0.01915 ; perimeter
G1 X62.830 Y98.324 E0.01794 ; perimeter
G1 X63.228 Y98.134 E0.01819 ; perimeter
G1 X63.681 Y98.001 E0.01944 ; perimeter
G1 X64.140 Y97.940 E0.01907 ; perimeter
G1 X64.606 Y97.943 E0.01920 ; perimeter
G1 X65.171 Y98.025 E0.02352 ; perimeter
G1 X65.733 Y98.195 E0.02417 ; perimeter
G1 X66.137 Y98.368 E0.01811 ; perimeter
G1 X66.556 Y98.605 E0.01982 ; perimeter
G1 X67.064 Y98.976 E0.02592 ; perimeter
G1 X81.793 Y111.335 E0.79209 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y116.447 E0.09071 ; perimeter
G1 X101.069 Y116.447 E0.17714 ; perimeter
G1 X101.069 Y119.916 E0.14294 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.680 Y119.886 F10800.000 ; move inwards before travel
G1 F8640
G1 X97.778 Y119.950 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X100.162 Y118.382 ; move to first infill point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7124.33
G1 X99.335 Y117.555 E0.06139 ; infill
G1 X98.620 Y117.555 E0.03753 ; infill
G1 X99.933 Y118.868 E0.09748 ; infill
G1 X99.218 Y118.868 E0.03753 ; infill
G1 X97.906 Y117.555 E0.09748 ; infill
G1 X97.878 Y117.555 E0.00146 ; infill
G1 X97.878 Y118.242 E0.03608 ; infill
G1 X98.704 Y119.069 E0.06138 ; infill
G1 F8640
G1 X97.878 Y118.242 E-0.26985 ; wipe and retract
G1 X97.878 Y117.555 E-0.15861 ; wipe and retract
G1 X97.906 Y117.555 E-0.00640 ; wipe and retract
G1 X98.902 Y118.551 E-0.32515 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X75.854 Y130.116 ; move to first perimeter point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.264 Y130.460 E0.78590 ; perimeter
G1 X75.900 Y130.154 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q53 S65
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
M73 P53 R63
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X149.153 Y119.184 ; move to first perimeter point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.153 Y117.239 E0.08010 ; perimeter
G1 X151.868 Y117.239 E0.11183 ; perimeter
G1 X151.868 Y119.184 E0.08010 ; perimeter
G1 X149.213 Y119.184 E0.10936 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.757 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X148.757 Y116.843 E0.11276 ; perimeter
G1 X152.264 Y116.843 E0.14449 ; perimeter
G1 X152.264 Y119.045 E0.09071 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X182.612 Y99.287 E0.79759 ; perimeter
G1 X183.036 Y98.972 E0.02173 ; perimeter
G1 X183.367 Y98.779 E0.01580 ; perimeter
G1 X183.925 Y98.533 E0.02512 ; perimeter
G1 X184.377 Y98.406 E0.01936 ; perimeter
G1 X184.802 Y98.342 E0.01769 ; perimeter
G1 X185.266 Y98.336 E0.01912 ; perimeter
G1 X185.667 Y98.390 E0.01664 ; perimeter
G1 X186.045 Y98.500 E0.01625 ; perimeter
G1 X186.399 Y98.668 E0.01614 ; perimeter
G1 X186.698 Y98.878 E0.01505 ; perimeter
G1 X186.139 Y99.347 E0.03006 ; perimeter
G1 X185.925 Y99.214 E0.01039 ; perimeter
G1 X185.508 Y99.059 E0.01834 ; perimeter
G1 X185.065 Y98.986 E0.01847 ; perimeter
G1 X184.613 Y98.991 E0.01864 ; perimeter
G1 X184.163 Y99.072 E0.01884 ; perimeter
G1 X183.726 Y99.223 E0.01902 ; perimeter
G1 X183.323 Y99.433 E0.01873 ; perimeter
G1 X183.089 Y99.594 E0.01169 ; perimeter
G1 X167.976 Y112.267 E0.81253 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X148.817 Y119.580 E0.21862 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.360 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X148.360 Y116.447 E0.14541 ; perimeter
G1 X152.660 Y116.447 E0.17714 ; perimeter
G1 X152.660 Y118.648 E0.09071 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X182.367 Y98.976 E0.79213 ; perimeter
G1 X182.817 Y98.641 E0.02314 ; perimeter
G1 X183.187 Y98.426 E0.01762 ; perimeter
G1 X183.791 Y98.159 E0.02718 ; perimeter
G1 X184.294 Y98.017 E0.02155 ; perimeter
G1 X184.770 Y97.946 E0.01983 ; perimeter
G1 X185.290 Y97.940 E0.02142 ; perimeter
G1 X185.749 Y98.001 E0.01906 ; perimeter
G1 X186.187 Y98.128 E0.01879 ; perimeter
G1 X186.600 Y98.324 E0.01884 ; perimeter
G1 X186.961 Y98.578 E0.01818 ; perimeter
G1 X187.284 Y98.904 E0.01891 ; perimeter
G1 X186.152 Y99.854 E0.06089 ; perimeter
G1 X186.056 Y99.763 E0.00544 ; perimeter
G1 X185.750 Y99.572 E0.01489 ; perimeter
G1 X185.405 Y99.444 E0.01513 ; perimeter
G1 X185.035 Y99.382 E0.01546 ; perimeter
G1 X184.650 Y99.387 E0.01584 ; perimeter
G1 X184.263 Y99.456 E0.01621 ; perimeter
G1 X183.884 Y99.588 E0.01653 ; perimeter
G1 X183.528 Y99.773 E0.01654 ; perimeter
G1 X183.329 Y99.910 E0.00993 ; perimeter
G1 X168.120 Y112.663 E0.81768 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X148.420 Y119.976 E0.24090 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.504 Y119.603 F10800.000 ; move inwards before travel
G1 F8640
G1 X148.364 Y116.685 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X150.295 Y119.069 ; move to first infill point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7124.34
G1 X149.469 Y118.242 E0.06138 ; infill
G1 X149.469 Y117.555 E0.03608 ; infill
G1 X149.497 Y117.555 E0.00146 ; infill
G1 X150.809 Y118.868 E0.09748 ; infill
G1 X151.524 Y118.868 E0.03753 ; infill
G1 X150.211 Y117.555 E0.09748 ; infill
G1 X150.926 Y117.555 E0.03753 ; infill
G1 X151.752 Y118.382 E0.06139 ; infill
G1 F8640
G1 X150.926 Y117.555 E-0.26989 ; wipe and retract
G1 X150.211 Y117.555 E-0.16501 ; wipe and retract
G1 X151.207 Y118.551 E-0.32510 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X191.074 Y110.459 ; move to first perimeter point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X190.730 Y110.049 E0.02205 ; perimeter
G1 X193.384 Y107.822 E0.14273 ; perimeter
G1 X189.973 Y103.756 E0.21861 ; perimeter
G1 X187.319 Y105.983 E0.14273 ; perimeter
G1 X186.975 Y105.573 E0.02205 ; perimeter
G1 X189.629 Y103.346 E0.14273 ; perimeter
G1 X187.180 Y100.428 E0.15696 ; perimeter
G1 X187.687 Y100.002 E0.02730 ; perimeter
G1 X196.685 Y110.724 E0.57663 ; perimeter
G1 X196.177 Y111.150 E0.02729 ; perimeter
G1 X193.728 Y108.232 E0.15696 ; perimeter
G1 X191.120 Y110.420 E0.14026 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.025 Y111.017 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X190.172 Y110.000 E0.05471 ; perimeter
G1 X192.826 Y107.773 E0.14273 ; perimeter
G1 X189.924 Y104.315 E0.18596 ; perimeter
G1 X187.270 Y106.542 E0.14273 ; perimeter
G1 X186.416 Y105.525 E0.05471 ; perimeter
G1 X189.071 Y103.298 E0.14273 ; perimeter
G1 X186.622 Y100.379 E0.15696 ; perimeter
G1 X187.736 Y99.443 E0.05995 ; perimeter
G1 X197.243 Y110.773 E0.60929 ; perimeter
G1 X196.128 Y111.709 E0.05995 ; perimeter
G1 X193.679 Y108.790 E0.15696 ; perimeter
G1 X191.071 Y110.979 E0.14026 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.066 Y110.619 F10800.000 ; move inwards before travel
G1 F8640
G1 X190.172 Y110.000 E-0.30695 ; wipe and retract
G1 X191.675 Y108.739 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X145.296 Y138.884 ; move to first perimeter point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X145.298 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E1.08452 ; perimeter
G1 X197.303 Y116.801 E1.38095 ; perimeter
G1 X197.615 Y116.500 E0.01787 ; perimeter
G1 X197.907 Y116.124 E0.01962 ; perimeter
G1 X198.132 Y115.719 E0.01907 ; perimeter
G1 X198.289 Y115.290 E0.01884 ; perimeter
G1 X198.373 Y114.845 E0.01864 ; perimeter
G1 X198.377 Y114.397 E0.01847 ; perimeter
G1 X198.297 Y113.959 E0.01834 ; perimeter
G1 X198.132 Y113.548 E0.01826 ; perimeter
G1 X197.904 Y113.208 E0.01685 ; perimeter
G1 X197.139 Y112.297 E0.04901 ; perimeter
G1 X197.647 Y111.871 E0.02729 ; perimeter
G1 X198.536 Y112.931 E0.05699 ; perimeter
G1 X198.762 Y113.254 E0.01624 ; perimeter
G1 X198.918 Y113.587 E0.01517 ; perimeter
G1 X199.019 Y113.950 E0.01551 ; perimeter
G1 X199.064 Y114.355 E0.01679 ; perimeter
G1 X199.042 Y114.796 E0.01821 ; perimeter
G1 X198.961 Y115.215 E0.01756 ; perimeter
G1 X198.826 Y115.619 E0.01755 ; perimeter
G1 X198.569 Y116.133 E0.02367 ; perimeter
G1 X198.354 Y116.461 E0.01618 ; perimeter
G1 X198.033 Y116.848 E0.02071 ; perimeter
G1 X197.651 Y117.209 E0.02165 ; perimeter
G1 X171.819 Y138.884 E1.38917 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X145.356 Y138.884 E0.81187 ; perimeter
M204 S1000 ; adjust acceleration
G1 X144.898 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X144.903 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E1.09484 ; perimeter
G1 X197.038 Y116.507 E1.37443 ; perimeter
G1 X197.319 Y116.235 E0.01612 ; perimeter
G1 X197.575 Y115.905 E0.01721 ; perimeter
G1 X197.770 Y115.553 E0.01655 ; perimeter
G1 X197.906 Y115.184 E0.01621 ; perimeter
G1 X197.977 Y114.806 E0.01584 ; perimeter
G1 X197.981 Y114.431 E0.01546 ; perimeter
G1 X197.915 Y114.069 E0.01513 ; perimeter
G1 X197.780 Y113.734 E0.01489 ; perimeter
G1 X197.587 Y113.447 E0.01426 ; perimeter
G1 X196.581 Y112.248 E0.06447 ; perimeter
G1 X197.696 Y111.313 E0.05995 ; perimeter
G1 X198.851 Y112.689 E0.07403 ; perimeter
G1 X199.106 Y113.055 E0.01837 ; perimeter
G1 X199.291 Y113.449 E0.01794 ; perimeter
G1 X199.409 Y113.874 E0.01819 ; perimeter
G1 X199.461 Y114.343 E0.01941 ; perimeter
G1 X199.437 Y114.844 E0.02068 ; perimeter
G1 X199.346 Y115.316 E0.01980 ; perimeter
G1 X199.193 Y115.771 E0.01978 ; perimeter
G1 X198.914 Y116.331 E0.02577 ; perimeter
G1 X198.673 Y116.697 E0.01807 ; perimeter
G1 X198.322 Y117.119 E0.02262 ; perimeter
G1 X197.914 Y117.505 E0.02311 ; perimeter
G1 X171.963 Y139.280 E1.39559 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X144.958 Y139.280 E0.81194 ; perimeter
M204 S1000 ; adjust acceleration
G1 X145.106 Y138.939 F10800.000 ; move inwards before travel
G1 F8640
G1 X144.903 Y137.952 E-0.30690 ; wipe and retract
G1 X146.865 Y137.952 E-0.45310 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
G1 X165.575 Y139.868 ; move to first infill point
G1 Z11.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.784 Y140.077 E0.01484 ; infill
G1 X166.469 Y140.077 E0.03448 ; infill
G1 X165.776 Y139.384 E0.04930 ; infill
G1 X165.776 Y139.061 E0.01627 ; infill
G1 X166.138 Y139.061 E0.01821 ; infill
G1 X167.153 Y140.077 E0.07230 ; infill
G1 X167.838 Y140.077 E0.03448 ; infill
G1 X166.823 Y139.061 E0.07230 ; infill
G1 X167.508 Y139.061 E0.03448 ; infill
G1 X168.523 Y140.077 E0.07230 ; infill
G1 X169.208 Y140.077 E0.03448 ; infill
G1 X168.193 Y139.061 E0.07230 ; infill
G1 X168.878 Y139.061 E0.03448 ; infill
G1 X169.660 Y139.843 E0.05567 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;11.5


G1 F8640
G1 X168.878 Y139.061 E-0.25535 ; wipe and retract
G1 X168.193 Y139.061 E-0.15815 ; wipe and retract
G1 X169.208 Y140.077 E-0.33164 ; wipe and retract
G1 X169.144 Y140.077 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z11.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;11.5
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X104.000 Y100.738 ; move to first perimeter point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.79710 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X51.930 Y78.950 E1.39638 ; perimeter
G1 X51.549 Y78.589 E0.02162 ; perimeter
G1 X51.229 Y78.205 E0.02060 ; perimeter
G1 X50.963 Y77.795 E0.02013 ; perimeter
G1 X50.757 Y77.368 E0.01954 ; perimeter
G1 X50.618 Y76.953 E0.01803 ; perimeter
G1 X50.534 Y76.506 E0.01873 ; perimeter
G1 X50.517 Y76.096 E0.01692 ; perimeter
G1 X50.561 Y75.696 E0.01657 ; perimeter
G1 X50.663 Y75.327 E0.01575 ; perimeter
G1 X50.821 Y74.992 E0.01526 ; perimeter
G1 X51.045 Y74.672 E0.01608 ; perimeter
G1 X51.934 Y73.612 E0.05700 ; perimeter
G1 X52.441 Y74.038 E0.02729 ; perimeter
G1 X51.677 Y74.950 E0.04901 ; perimeter
G1 X51.449 Y75.289 E0.01685 ; perimeter
G1 X51.283 Y75.700 E0.01826 ; perimeter
G1 X51.203 Y76.138 E0.01834 ; perimeter
G1 X51.208 Y76.586 E0.01847 ; perimeter
G1 X51.291 Y77.031 E0.01864 ; perimeter
G1 X51.449 Y77.460 E0.01884 ; perimeter
G1 X51.674 Y77.864 E0.01903 ; perimeter
G1 X51.957 Y78.232 E0.01915 ; perimeter
G1 X52.277 Y78.542 E0.01836 ; perimeter
G1 X78.091 Y100.203 E1.38818 ; perimeter
G1 X104.003 Y100.203 E1.06745 ; perimeter
G1 X104.000 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X104.395 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.79703 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03672 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X51.666 Y79.246 E1.40280 ; perimeter
G1 X51.259 Y78.861 E0.02307 ; perimeter
G1 X50.909 Y78.441 E0.02255 ; perimeter
G1 X50.617 Y77.989 E0.02214 ; perimeter
G1 X50.389 Y77.517 E0.02160 ; perimeter
G1 X50.234 Y77.053 E0.02018 ; perimeter
G1 X50.139 Y76.551 E0.02103 ; perimeter
G1 X50.119 Y76.082 E0.01935 ; perimeter
G1 X50.170 Y75.620 E0.01913 ; perimeter
G1 X50.290 Y75.189 E0.01844 ; perimeter
G1 X50.476 Y74.793 E0.01804 ; perimeter
G1 X50.730 Y74.431 E0.01821 ; perimeter
G1 X51.885 Y73.054 E0.07404 ; perimeter
G1 X53.000 Y73.989 E0.05995 ; perimeter
G1 X51.994 Y75.188 E0.06447 ; perimeter
G1 X51.801 Y75.475 E0.01426 ; perimeter
G1 X51.666 Y75.811 E0.01489 ; perimeter
G1 X51.600 Y76.172 E0.01513 ; perimeter
G1 X51.604 Y76.548 E0.01546 ; perimeter
G1 X51.675 Y76.925 E0.01584 ; perimeter
G1 X51.810 Y77.295 E0.01621 ; perimeter
G1 X52.006 Y77.646 E0.01654 ; perimeter
G1 X52.254 Y77.968 E0.01675 ; perimeter
G1 X52.543 Y78.248 E0.01659 ; perimeter
G1 X78.235 Y99.806 E1.38165 ; perimeter
G1 X104.401 Y99.806 E1.07791 ; perimeter
G1 X104.395 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X103.995 Y101.128 F10800.000 ; move inwards before travel
G1 F8640
G1 X101.104 Y101.084 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X83.730 Y102.131 ; move to first infill point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.939 Y101.923 E0.01484 ; infill
G1 X83.939 Y101.238 E0.03448 ; infill
G1 X83.246 Y101.931 E0.04931 ; infill
G1 X82.561 Y101.931 E0.03448 ; infill
G1 X83.577 Y100.915 E0.07230 ; infill
G1 X82.892 Y100.915 E0.03448 ; infill
G1 X81.876 Y101.931 E0.07230 ; infill
G1 X81.191 Y101.931 E0.03448 ; infill
G1 X82.207 Y100.915 E0.07230 ; infill
G1 X81.522 Y100.915 E0.03448 ; infill
G1 X80.506 Y101.931 E0.07230 ; infill
G1 X80.256 Y101.931 E0.01260 ; infill
G1 X80.256 Y101.496 E0.02188 ; infill
G1 X81.038 Y100.714 E0.05566 ; infill
G1 F8640
G1 X80.256 Y101.496 E-0.25530 ; wipe and retract
G1 X80.256 Y101.931 E-0.10036 ; wipe and retract
G1 X80.506 Y101.931 E-0.05779 ; wipe and retract
G1 X81.522 Y100.915 E-0.33164 ; wipe and retract
G1 X81.587 Y100.915 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X58.502 Y72.196 ; move to first perimeter point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X55.853 Y69.973 E0.14246 ; perimeter
G1 X53.404 Y72.892 E0.15696 ; perimeter
G1 X52.896 Y72.466 E0.02729 ; perimeter
G1 X61.893 Y61.743 E0.57663 ; perimeter
G1 X62.401 Y62.169 E0.02729 ; perimeter
G1 X59.952 Y65.088 E0.15696 ; perimeter
G1 X62.601 Y67.311 E0.14246 ; perimeter
G1 X62.257 Y67.721 E0.02205 ; perimeter
G1 X59.608 Y65.498 E0.14246 ; perimeter
G1 X56.197 Y69.563 E0.21861 ; perimeter
G1 X58.846 Y71.786 E0.14246 ; perimeter
G1 X58.540 Y72.150 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.550 Y72.754 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X55.901 Y70.531 E0.14246 ; perimeter
G1 X53.452 Y73.450 E0.15696 ; perimeter
G1 X52.338 Y72.515 E0.05995 ; perimeter
G1 X61.844 Y61.185 E0.60929 ; perimeter
G1 X62.959 Y62.120 E0.05995 ; perimeter
G1 X60.510 Y65.039 E0.15696 ; perimeter
G1 X63.159 Y67.262 E0.14246 ; perimeter
G1 X62.306 Y68.279 E0.05471 ; perimeter
G1 X59.657 Y66.056 E0.14246 ; perimeter
G1 X56.755 Y69.514 E0.18596 ; perimeter
G1 X59.404 Y71.737 E0.14246 ; perimeter
G1 X58.589 Y72.708 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.278 Y72.462 F10800.000 ; move inwards before travel
G1 F8640
G1 X56.031 Y70.637 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X100.312 Y81.038 ; move to first perimeter point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.10153 ; perimeter
G1 X97.847 Y78.918 E0.08731 ; perimeter
G1 X100.312 Y78.918 E0.10153 ; perimeter
G1 X100.312 Y80.978 E0.08484 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.708 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.21080 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X66.627 Y61.441 E0.81265 ; perimeter
G1 X66.267 Y61.180 E0.01834 ; perimeter
G1 X65.854 Y60.964 E0.01917 ; perimeter
G1 X65.418 Y60.813 E0.01903 ; perimeter
G1 X64.968 Y60.732 E0.01884 ; perimeter
G1 X64.515 Y60.727 E0.01864 ; perimeter
G1 X64.073 Y60.801 E0.01847 ; perimeter
G1 X63.656 Y60.955 E0.01834 ; perimeter
G1 X63.442 Y61.089 E0.01039 ; perimeter
G1 X62.882 Y60.619 E0.03007 ; perimeter
G1 X63.181 Y60.409 E0.01503 ; perimeter
G1 X63.525 Y60.245 E0.01571 ; perimeter
G1 X63.922 Y60.130 E0.01704 ; perimeter
G1 X64.320 Y60.077 E0.01653 ; perimeter
G1 X64.740 Y60.081 E0.01730 ; perimeter
G1 X65.204 Y60.148 E0.01933 ; perimeter
G1 X65.733 Y60.304 E0.02272 ; perimeter
G1 X66.113 Y60.466 E0.01702 ; perimeter
G1 X66.500 Y60.686 E0.01832 ; perimeter
G1 X66.970 Y61.030 E0.02399 ; perimeter
G1 X81.934 Y73.586 E0.80470 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y78.522 E0.09792 ; perimeter
G1 X100.708 Y78.522 E0.13419 ; perimeter
G1 X100.708 Y81.374 E0.11750 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.105 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.23307 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X66.384 Y61.754 E0.81801 ; perimeter
G1 X66.058 Y61.518 E0.01657 ; perimeter
G1 X65.697 Y61.329 E0.01678 ; perimeter
G1 X65.318 Y61.198 E0.01654 ; perimeter
G1 X64.930 Y61.128 E0.01621 ; perimeter
G1 X64.546 Y61.124 E0.01584 ; perimeter
G1 X64.176 Y61.185 E0.01546 ; perimeter
G1 X63.831 Y61.313 E0.01513 ; perimeter
G1 X63.524 Y61.504 E0.01489 ; perimeter
G1 X63.429 Y61.596 E0.00544 ; perimeter
G1 X62.297 Y60.646 E0.06089 ; perimeter
G1 X62.622 Y60.318 E0.01899 ; perimeter
G1 X62.980 Y60.066 E0.01804 ; perimeter
G1 X63.383 Y59.873 E0.01843 ; perimeter
G1 X63.841 Y59.741 E0.01960 ; perimeter
G1 X64.295 Y59.681 E0.01891 ; perimeter
G1 X64.770 Y59.685 E0.01955 ; perimeter
G1 X65.289 Y59.759 E0.02161 ; perimeter
G1 X65.868 Y59.930 E0.02486 ; perimeter
G1 X66.290 Y60.111 E0.01889 ; perimeter
G1 X66.716 Y60.352 E0.02018 ; perimeter
G1 X67.215 Y60.717 E0.02548 ; perimeter
G1 X82.078 Y73.189 E0.79930 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y78.125 E0.09792 ; perimeter
G1 X101.105 Y78.125 E0.16684 ; perimeter
G1 X101.105 Y81.770 E0.15015 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.717 Y81.732 F10800.000 ; move inwards before travel
G1 F8640
G1 X97.813 Y81.805 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X99.188 Y80.922 ; move to first infill point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7251.08
G1 X99.996 Y80.115 E0.05895 ; infill
G1 X99.996 Y79.413 E0.03623 ; infill
G1 X98.687 Y80.722 E0.09553 ; infill
G1 X98.163 Y80.722 E0.02702 ; infill
G1 X98.163 Y80.543 E0.00921 ; infill
G1 X99.472 Y79.234 E0.09552 ; infill
G1 X98.770 Y79.234 E0.03623 ; infill
G1 X97.962 Y80.042 E0.05894 ; infill
G1 F8640
G1 X98.770 Y79.234 E-0.26373 ; wipe and retract
G1 X99.472 Y79.234 E-0.16212 ; wipe and retract
G1 X98.449 Y80.257 E-0.33415 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X76.140 Y91.969 ; move to first perimeter point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.550 Y92.314 E0.78590 ; perimeter
G1 X76.186 Y92.008 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X149.688 Y81.038 ; move to first perimeter point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.688 Y78.918 E0.08731 ; perimeter
G1 X152.153 Y78.918 E0.10153 ; perimeter
G1 X152.153 Y81.038 E0.08731 ; perimeter
G1 X149.748 Y81.038 E0.09906 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.292 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X149.292 Y78.522 E0.11997 ; perimeter
G1 X152.549 Y78.522 E0.13419 ; perimeter
G1 X152.549 Y80.899 E0.09792 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X183.032 Y61.028 E0.80480 ; perimeter
G1 X183.454 Y60.714 E0.02169 ; perimeter
G1 X183.802 Y60.512 E0.01658 ; perimeter
G1 X184.341 Y60.275 E0.02425 ; perimeter
G1 X184.794 Y60.148 E0.01935 ; perimeter
G1 X185.226 Y60.083 E0.01803 ; perimeter
G1 X185.681 Y60.077 E0.01873 ; perimeter
G1 X186.088 Y60.132 E0.01692 ; perimeter
G1 X186.472 Y60.244 E0.01648 ; perimeter
G1 X186.819 Y60.410 E0.01584 ; perimeter
G1 X187.118 Y60.619 E0.01502 ; perimeter
G1 X186.558 Y61.089 E0.03007 ; perimeter
G1 X186.344 Y60.955 E0.01039 ; perimeter
G1 X185.927 Y60.801 E0.01834 ; perimeter
G1 X185.485 Y60.727 E0.01847 ; perimeter
G1 X185.032 Y60.732 E0.01864 ; perimeter
G1 X184.582 Y60.813 E0.01884 ; perimeter
G1 X184.146 Y60.964 E0.01903 ; perimeter
G1 X183.740 Y61.176 E0.01885 ; perimeter
G1 X183.505 Y61.338 E0.01178 ; perimeter
G1 X168.261 Y74.121 E0.81953 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X149.352 Y81.434 E0.20833 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.895 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X148.895 Y78.125 E0.15262 ; perimeter
G1 X152.945 Y78.125 E0.16684 ; perimeter
G1 X152.945 Y80.502 E0.09792 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X182.786 Y60.717 E0.79934 ; perimeter
G1 X183.236 Y60.383 E0.02310 ; perimeter
G1 X183.623 Y60.158 E0.01842 ; perimeter
G1 X184.207 Y59.901 E0.02630 ; perimeter
G1 X184.710 Y59.759 E0.02153 ; perimeter
G1 X185.195 Y59.687 E0.02018 ; perimeter
G1 X185.705 Y59.681 E0.02103 ; perimeter
G1 X186.171 Y59.743 E0.01935 ; perimeter
G1 X186.614 Y59.872 E0.01904 ; perimeter
G1 X187.020 Y60.066 E0.01854 ; perimeter
G1 X187.378 Y60.318 E0.01804 ; perimeter
G1 X187.703 Y60.645 E0.01899 ; perimeter
G1 X186.571 Y61.596 E0.06089 ; perimeter
G1 X186.476 Y61.504 E0.00544 ; perimeter
G1 X186.169 Y61.313 E0.01489 ; perimeter
G1 X185.824 Y61.185 E0.01513 ; perimeter
G1 X185.454 Y61.124 E0.01546 ; perimeter
G1 X185.070 Y61.128 E0.01584 ; perimeter
G1 X184.682 Y61.198 E0.01621 ; perimeter
G1 X184.303 Y61.329 E0.01654 ; perimeter
G1 X183.945 Y61.516 E0.01664 ; perimeter
G1 X183.745 Y61.654 E0.01002 ; perimeter
G1 X168.405 Y74.517 E0.82469 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X148.955 Y81.830 E0.23060 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.039 Y81.457 F10800.000 ; move inwards before travel
G1 F8640
G1 X148.902 Y78.539 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X149.803 Y80.042 ; move to first infill point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7251.08
G1 X150.611 Y79.234 E0.05894 ; infill
G1 X151.313 Y79.234 E0.03623 ; infill
G1 X150.004 Y80.543 E0.09552 ; infill
G1 X150.004 Y80.722 E0.00921 ; infill
G1 X150.528 Y80.722 E0.02702 ; infill
G1 X151.837 Y79.413 E0.09553 ; infill
G1 X151.837 Y80.115 E0.03623 ; infill
G1 X151.029 Y80.922 E0.05895 ; infill
G1 F8640
G1 X151.837 Y80.115 E-0.26377 ; wipe and retract
G1 X151.837 Y79.413 E-0.16212 ; wipe and retract
G1 X150.814 Y80.436 E-0.33410 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X191.498 Y72.196 ; move to first perimeter point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X191.154 Y71.786 E0.02205 ; perimeter
G1 X193.803 Y69.563 E0.14246 ; perimeter
G1 X190.392 Y65.498 E0.21861 ; perimeter
G1 X187.743 Y67.721 E0.14246 ; perimeter
G1 X187.399 Y67.311 E0.02205 ; perimeter
G1 X190.048 Y65.088 E0.14246 ; perimeter
G1 X187.599 Y62.169 E0.15696 ; perimeter
G1 X188.107 Y61.743 E0.02729 ; perimeter
G1 X197.104 Y72.466 E0.57663 ; perimeter
G1 X196.596 Y72.892 E0.02729 ; perimeter
G1 X194.147 Y69.973 E0.15696 ; perimeter
G1 X191.544 Y72.157 E0.13999 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.450 Y72.754 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X190.596 Y71.737 E0.05471 ; perimeter
G1 X193.245 Y69.514 E0.14246 ; perimeter
G1 X190.343 Y66.056 E0.18596 ; perimeter
G1 X187.694 Y68.279 E0.14246 ; perimeter
G1 X186.841 Y67.262 E0.05471 ; perimeter
G1 X189.490 Y65.039 E0.14246 ; perimeter
G1 X187.041 Y62.120 E0.15696 ; perimeter
G1 X188.156 Y61.185 E0.05995 ; perimeter
G1 X197.662 Y72.515 E0.60929 ; perimeter
G1 X196.548 Y73.450 E0.05995 ; perimeter
G1 X194.099 Y70.531 E0.15696 ; perimeter
G1 X191.495 Y72.716 E0.13999 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.491 Y72.356 F10800.000 ; move inwards before travel
G1 F8640
G1 X190.596 Y71.737 E-0.30695 ; wipe and retract
G1 X192.099 Y70.476 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X146.000 Y100.738 ; move to first perimeter point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X145.997 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E1.06745 ; perimeter
G1 X197.723 Y78.543 E1.38818 ; perimeter
G1 X198.042 Y78.233 E0.01834 ; perimeter
G1 X198.326 Y77.864 E0.01918 ; perimeter
G1 X198.551 Y77.460 E0.01903 ; perimeter
G1 X198.709 Y77.031 E0.01884 ; perimeter
G1 X198.792 Y76.586 E0.01864 ; perimeter
G1 X198.797 Y76.138 E0.01847 ; perimeter
G1 X198.717 Y75.700 E0.01834 ; perimeter
G1 X198.551 Y75.289 E0.01826 ; perimeter
G1 X198.323 Y74.950 E0.01685 ; perimeter
G1 X197.559 Y74.038 E0.04901 ; perimeter
G1 X198.066 Y73.612 E0.02729 ; perimeter
G1 X198.955 Y74.672 E0.05700 ; perimeter
G1 X199.179 Y74.992 E0.01608 ; perimeter
G1 X199.337 Y75.327 E0.01526 ; perimeter
G1 X199.439 Y75.696 E0.01575 ; perimeter
G1 X199.483 Y76.094 E0.01652 ; perimeter
G1 X199.463 Y76.527 E0.01783 ; perimeter
G1 X199.382 Y76.952 E0.01784 ; perimeter
G1 X199.244 Y77.364 E0.01790 ; perimeter
G1 X198.998 Y77.859 E0.02280 ; perimeter
G1 X198.772 Y78.204 E0.01697 ; perimeter
G1 X198.451 Y78.589 E0.02066 ; perimeter
G1 X198.070 Y78.950 E0.02162 ; perimeter
G1 X172.104 Y100.738 E1.39638 ; perimeter
M73 Q53 S64
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X146.060 Y100.738 E0.79463 ; perimeter
M204 S1000 ; adjust acceleration
G1 X145.605 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X145.599 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E1.07791 ; perimeter
G1 X197.457 Y78.248 E1.38165 ; perimeter
M73 P53 R62
G1 X197.746 Y77.968 E0.01657 ; perimeter
G1 X197.994 Y77.646 E0.01678 ; perimeter
G1 X198.190 Y77.295 E0.01654 ; perimeter
G1 X198.325 Y76.925 E0.01621 ; perimeter
G1 X198.396 Y76.548 E0.01584 ; perimeter
G1 X198.400 Y76.172 E0.01546 ; perimeter
G1 X198.334 Y75.811 E0.01513 ; perimeter
G1 X198.199 Y75.475 E0.01489 ; perimeter
G1 X198.006 Y75.188 E0.01426 ; perimeter
G1 X197.000 Y73.989 E0.06447 ; perimeter
G1 X198.115 Y73.054 E0.05995 ; perimeter
G1 X199.270 Y74.431 E0.07404 ; perimeter
G1 X199.524 Y74.793 E0.01821 ; perimeter
G1 X199.710 Y75.189 E0.01804 ; perimeter
G1 X199.830 Y75.620 E0.01844 ; perimeter
G1 X199.881 Y76.081 E0.01911 ; perimeter
G1 X199.858 Y76.573 E0.02028 ; perimeter
G1 X199.766 Y77.053 E0.02011 ; perimeter
G1 X199.611 Y77.516 E0.02013 ; perimeter
G1 X199.342 Y78.057 E0.02489 ; perimeter
G1 X199.092 Y78.440 E0.01887 ; perimeter
G1 X198.741 Y78.861 E0.02258 ; perimeter
G1 X198.334 Y79.246 E0.02307 ; perimeter
G1 X172.248 Y101.134 E1.40280 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X145.665 Y101.134 E0.79455 ; perimeter
M204 S1000 ; adjust acceleration
G1 X145.812 Y100.792 F10800.000 ; move inwards before travel
G1 F8640
G1 X145.599 Y99.806 E-0.30702 ; wipe and retract
G1 X147.561 Y99.806 E-0.45298 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X166.843 Y100.714 ; move to first infill point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.061 Y101.496 E0.05566 ; infill
G1 X166.061 Y101.931 E0.02188 ; infill
G1 X166.312 Y101.931 E0.01260 ; infill
G1 X167.327 Y100.915 E0.07230 ; infill
G1 X168.012 Y100.915 E0.03448 ; infill
G1 X166.996 Y101.931 E0.07230 ; infill
G1 X167.681 Y101.931 E0.03448 ; infill
G1 X168.697 Y100.915 E0.07230 ; infill
G1 X169.382 Y100.915 E0.03448 ; infill
G1 X168.366 Y101.931 E0.07230 ; infill
G1 X169.051 Y101.931 E0.03448 ; infill
G1 X169.744 Y101.238 E0.04931 ; infill
G1 X169.744 Y101.923 E0.03448 ; infill
G1 X169.535 Y102.131 E0.01484 ; infill
G1 F8640
G1 X169.744 Y101.923 E-0.06809 ; wipe and retract
G1 X169.744 Y101.238 E-0.15815 ; wipe and retract
G1 X169.051 Y101.931 E-0.22616 ; wipe and retract
G1 X168.366 Y101.931 E-0.15815 ; wipe and retract
G1 X168.824 Y101.473 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X103.715 Y138.884 ; move to first perimeter point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.79710 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X51.645 Y117.096 E1.39638 ; perimeter
G1 X51.264 Y116.736 E0.02162 ; perimeter
G1 X50.943 Y116.352 E0.02060 ; perimeter
G1 X50.678 Y115.941 E0.02013 ; perimeter
G1 X50.472 Y115.514 E0.01954 ; perimeter
G1 X50.333 Y115.099 E0.01803 ; perimeter
G1 X50.249 Y114.652 E0.01873 ; perimeter
G1 X50.231 Y114.242 E0.01692 ; perimeter
G1 X50.276 Y113.842 E0.01657 ; perimeter
G1 X50.378 Y113.473 E0.01575 ; perimeter
G1 X50.535 Y113.138 E0.01526 ; perimeter
G1 X50.759 Y112.818 E0.01608 ; perimeter
G1 X51.649 Y111.758 E0.05700 ; perimeter
G1 X52.156 Y112.184 E0.02729 ; perimeter
G1 X51.392 Y113.096 E0.04901 ; perimeter
G1 X51.163 Y113.435 E0.01685 ; perimeter
G1 X50.998 Y113.846 E0.01826 ; perimeter
G1 X50.918 Y114.284 E0.01834 ; perimeter
G1 X50.922 Y114.733 E0.01847 ; perimeter
G1 X51.006 Y115.177 E0.01864 ; perimeter
G1 X51.164 Y115.607 E0.01884 ; perimeter
G1 X51.388 Y116.010 E0.01903 ; perimeter
G1 X51.672 Y116.378 E0.01915 ; perimeter
G1 X51.992 Y116.689 E0.01836 ; perimeter
G1 X77.806 Y138.349 E1.38818 ; perimeter
G1 X103.717 Y138.349 E1.06745 ; perimeter
G1 X103.715 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X104.110 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.79703 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03672 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X51.381 Y117.392 E1.40280 ; perimeter
G1 X50.974 Y117.007 E0.02307 ; perimeter
G1 X50.624 Y116.587 E0.02255 ; perimeter
G1 X50.332 Y116.136 E0.02214 ; perimeter
G1 X50.104 Y115.663 E0.02160 ; perimeter
G1 X49.949 Y115.199 E0.02018 ; perimeter
G1 X49.854 Y114.697 E0.02103 ; perimeter
G1 X49.834 Y114.228 E0.01935 ; perimeter
G1 X49.885 Y113.767 E0.01913 ; perimeter
G1 X50.005 Y113.335 E0.01844 ; perimeter
G1 X50.191 Y112.939 E0.01804 ; perimeter
G1 X50.445 Y112.577 E0.01821 ; perimeter
G1 X51.600 Y111.200 E0.07404 ; perimeter
G1 X52.715 Y112.135 E0.05995 ; perimeter
G1 X51.709 Y113.334 E0.06447 ; perimeter
G1 X51.516 Y113.622 E0.01426 ; perimeter
G1 X51.381 Y113.957 E0.01489 ; perimeter
G1 X51.315 Y114.318 E0.01513 ; perimeter
G1 X51.318 Y114.694 E0.01546 ; perimeter
G1 X51.390 Y115.072 E0.01584 ; perimeter
G1 X51.525 Y115.441 E0.01621 ; perimeter
G1 X51.720 Y115.792 E0.01654 ; perimeter
G1 X51.969 Y116.114 E0.01675 ; perimeter
G1 X52.258 Y116.394 E0.01659 ; perimeter
G1 X77.950 Y137.952 E1.38165 ; perimeter
G1 X104.116 Y137.952 E1.07791 ; perimeter
G1 X104.110 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X103.710 Y139.274 F10800.000 ; move inwards before travel
G1 F8640
G1 X100.818 Y139.231 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X83.445 Y140.278 ; move to first infill point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.654 Y140.069 E0.01484 ; infill
G1 X83.654 Y139.384 E0.03448 ; infill
G1 X82.961 Y140.077 E0.04931 ; infill
G1 X82.276 Y140.077 E0.03448 ; infill
G1 X83.292 Y139.061 E0.07230 ; infill
G1 X82.607 Y139.061 E0.03448 ; infill
G1 X81.591 Y140.077 E0.07230 ; infill
G1 X80.906 Y140.077 E0.03448 ; infill
G1 X81.922 Y139.061 E0.07230 ; infill
G1 X81.237 Y139.061 E0.03448 ; infill
G1 X80.221 Y140.077 E0.07230 ; infill
G1 X79.971 Y140.077 E0.01260 ; infill
G1 X79.971 Y139.642 E0.02188 ; infill
G1 X80.753 Y138.860 E0.05566 ; infill
G1 F8640
G1 X79.971 Y139.642 E-0.25530 ; wipe and retract
G1 X79.971 Y140.077 E-0.10036 ; wipe and retract
G1 X80.221 Y140.077 E-0.05779 ; wipe and retract
G1 X81.237 Y139.061 E-0.33164 ; wipe and retract
G1 X81.301 Y139.061 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X58.216 Y110.342 ; move to first perimeter point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X55.567 Y108.119 E0.14246 ; perimeter
G1 X53.118 Y111.038 E0.15696 ; perimeter
G1 X52.611 Y110.612 E0.02729 ; perimeter
G1 X61.608 Y99.889 E0.57663 ; perimeter
G1 X62.116 Y100.315 E0.02729 ; perimeter
G1 X59.667 Y103.234 E0.15696 ; perimeter
G1 X62.316 Y105.457 E0.14246 ; perimeter
G1 X61.972 Y105.867 E0.02205 ; perimeter
G1 X59.323 Y103.644 E0.14246 ; perimeter
G1 X55.911 Y107.709 E0.21861 ; perimeter
G1 X58.561 Y109.932 E0.14246 ; perimeter
G1 X58.255 Y110.296 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.265 Y110.900 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X55.616 Y108.678 E0.14246 ; perimeter
G1 X53.167 Y111.596 E0.15696 ; perimeter
G1 X52.052 Y110.661 E0.05995 ; perimeter
G1 X61.559 Y99.331 E0.60929 ; perimeter
G1 X62.674 Y100.266 E0.05995 ; perimeter
G1 X60.225 Y103.185 E0.15696 ; perimeter
G1 X62.874 Y105.408 E0.14246 ; perimeter
G1 X62.020 Y106.425 E0.05471 ; perimeter
G1 X59.371 Y104.202 E0.14246 ; perimeter
G1 X56.470 Y107.660 E0.18596 ; perimeter
G1 X59.119 Y109.883 E0.14246 ; perimeter
G1 X58.304 Y110.854 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.992 Y110.608 F10800.000 ; move inwards before travel
G1 F8640
G1 X55.746 Y108.783 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X100.027 Y119.184 ; move to first perimeter point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.10153 ; perimeter
G1 X97.562 Y117.064 E0.08731 ; perimeter
G1 X100.027 Y117.064 E0.10153 ; perimeter
G1 X100.027 Y119.124 E0.08484 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.423 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.21080 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X66.342 Y99.587 E0.81265 ; perimeter
G1 X65.982 Y99.326 E0.01834 ; perimeter
G1 X65.569 Y99.110 E0.01917 ; perimeter
G1 X65.133 Y98.959 E0.01903 ; perimeter
G1 X64.683 Y98.878 E0.01884 ; perimeter
G1 X64.230 Y98.873 E0.01864 ; perimeter
G1 X63.788 Y98.947 E0.01847 ; perimeter
G1 X63.371 Y99.102 E0.01834 ; perimeter
G1 X63.156 Y99.235 E0.01039 ; perimeter
G1 X62.597 Y98.766 E0.03007 ; perimeter
G1 X62.896 Y98.556 E0.01503 ; perimeter
G1 X63.240 Y98.391 E0.01571 ; perimeter
G1 X63.637 Y98.276 E0.01704 ; perimeter
G1 X64.035 Y98.223 E0.01653 ; perimeter
G1 X64.455 Y98.227 E0.01730 ; perimeter
G1 X64.919 Y98.294 E0.01933 ; perimeter
G1 X65.448 Y98.450 E0.02272 ; perimeter
G1 X65.828 Y98.612 E0.01702 ; perimeter
G1 X66.215 Y98.832 E0.01832 ; perimeter
G1 X66.685 Y99.176 E0.02399 ; perimeter
G1 X81.649 Y111.732 E0.80470 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y116.668 E0.09792 ; perimeter
G1 X100.423 Y116.668 E0.13419 ; perimeter
G1 X100.423 Y119.520 E0.11750 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.819 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.23307 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X66.098 Y99.900 E0.81801 ; perimeter
G1 X65.773 Y99.664 E0.01657 ; perimeter
G1 X65.412 Y99.475 E0.01678 ; perimeter
G1 X65.032 Y99.344 E0.01654 ; perimeter
G1 X64.645 Y99.274 E0.01621 ; perimeter
G1 X64.261 Y99.270 E0.01584 ; perimeter
G1 X63.890 Y99.332 E0.01546 ; perimeter
G1 X63.546 Y99.459 E0.01513 ; perimeter
G1 X63.239 Y99.650 E0.01489 ; perimeter
G1 X63.144 Y99.742 E0.00544 ; perimeter
G1 X62.012 Y98.792 E0.06089 ; perimeter
G1 X62.337 Y98.464 E0.01899 ; perimeter
G1 X62.695 Y98.212 E0.01804 ; perimeter
G1 X63.098 Y98.019 E0.01843 ; perimeter
G1 X63.555 Y97.887 E0.01960 ; perimeter
G1 X64.010 Y97.827 E0.01891 ; perimeter
G1 X64.485 Y97.831 E0.01955 ; perimeter
G1 X65.004 Y97.905 E0.02161 ; perimeter
G1 X65.583 Y98.076 E0.02486 ; perimeter
G1 X66.004 Y98.257 E0.01889 ; perimeter
G1 X66.430 Y98.498 E0.02018 ; perimeter
G1 X66.930 Y98.864 E0.02548 ; perimeter
G1 X81.793 Y111.335 E0.79930 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y116.272 E0.09792 ; perimeter
G1 X100.819 Y116.272 E0.16684 ; perimeter
G1 X100.819 Y119.916 E0.15015 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.432 Y119.879 F10800.000 ; move inwards before travel
G1 F8640
G1 X97.528 Y119.951 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X98.903 Y119.069 ; move to first infill point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7251.08
G1 X99.711 Y118.261 E0.05895 ; infill
G1 X99.711 Y117.559 E0.03623 ; infill
G1 X98.402 Y118.868 E0.09553 ; infill
G1 X97.878 Y118.868 E0.02702 ; infill
G1 X97.878 Y118.689 E0.00921 ; infill
G1 X99.187 Y117.380 E0.09552 ; infill
G1 X98.485 Y117.380 E0.03623 ; infill
G1 X97.677 Y118.188 E0.05894 ; infill
G1 F8640
G1 X98.485 Y117.380 E-0.26373 ; wipe and retract
G1 X99.187 Y117.380 E-0.16212 ; wipe and retract
G1 X98.164 Y118.404 E-0.33415 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X75.854 Y130.116 ; move to first perimeter point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.264 Y130.460 E0.78590 ; perimeter
G1 X75.900 Y130.154 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X149.403 Y119.184 ; move to first perimeter point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.403 Y117.064 E0.08731 ; perimeter
G1 X151.868 Y117.064 E0.10153 ; perimeter
G1 X151.868 Y119.184 E0.08731 ; perimeter
G1 X149.463 Y119.184 E0.09906 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.007 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X149.007 Y116.668 E0.11997 ; perimeter
G1 X152.264 Y116.668 E0.13419 ; perimeter
G1 X152.264 Y119.045 E0.09792 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X182.747 Y99.174 E0.80480 ; perimeter
G1 X183.169 Y98.860 E0.02169 ; perimeter
G1 X183.517 Y98.658 E0.01658 ; perimeter
G1 X184.056 Y98.421 E0.02425 ; perimeter
G1 X184.508 Y98.294 E0.01935 ; perimeter
G1 X184.941 Y98.229 E0.01803 ; perimeter
G1 X185.396 Y98.224 E0.01873 ; perimeter
G1 X185.803 Y98.278 E0.01692 ; perimeter
G1 X186.187 Y98.390 E0.01648 ; perimeter
G1 X186.534 Y98.556 E0.01584 ; perimeter
G1 X186.832 Y98.766 E0.01502 ; perimeter
G1 X186.273 Y99.235 E0.03007 ; perimeter
G1 X186.059 Y99.102 E0.01039 ; perimeter
G1 X185.642 Y98.947 E0.01834 ; perimeter
G1 X185.200 Y98.873 E0.01847 ; perimeter
G1 X184.747 Y98.878 E0.01864 ; perimeter
G1 X184.297 Y98.959 E0.01884 ; perimeter
G1 X183.860 Y99.110 E0.01903 ; perimeter
G1 X183.455 Y99.322 E0.01885 ; perimeter
G1 X183.219 Y99.485 E0.01178 ; perimeter
G1 X167.976 Y112.267 E0.81953 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X149.067 Y119.580 E0.20833 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.610 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X148.610 Y116.272 E0.15262 ; perimeter
G1 X152.660 Y116.272 E0.16684 ; perimeter
G1 X152.660 Y118.648 E0.09792 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X182.501 Y98.863 E0.79934 ; perimeter
G1 X182.951 Y98.529 E0.02310 ; perimeter
G1 X183.338 Y98.304 E0.01842 ; perimeter
G1 X183.922 Y98.047 E0.02630 ; perimeter
G1 X184.425 Y97.905 E0.02153 ; perimeter
G1 X184.909 Y97.833 E0.02018 ; perimeter
G1 X185.420 Y97.827 E0.02103 ; perimeter
G1 X185.885 Y97.889 E0.01935 ; perimeter
G1 X186.329 Y98.019 E0.01904 ; perimeter
G1 X186.735 Y98.212 E0.01854 ; perimeter
G1 X187.093 Y98.464 E0.01804 ; perimeter
G1 X187.418 Y98.792 E0.01899 ; perimeter
G1 X186.286 Y99.742 E0.06089 ; perimeter
G1 X186.191 Y99.650 E0.00544 ; perimeter
G1 X185.884 Y99.459 E0.01489 ; perimeter
G1 X185.539 Y99.332 E0.01513 ; perimeter
G1 X185.169 Y99.270 E0.01546 ; perimeter
G1 X184.785 Y99.274 E0.01584 ; perimeter
G1 X184.397 Y99.344 E0.01621 ; perimeter
G1 X184.018 Y99.475 E0.01654 ; perimeter
G1 X183.660 Y99.662 E0.01664 ; perimeter
G1 X183.460 Y99.800 E0.01002 ; perimeter
G1 X168.120 Y112.663 E0.82469 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X148.670 Y119.976 E0.23060 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.754 Y119.603 F10800.000 ; move inwards before travel
G1 F8640
G1 X148.617 Y116.685 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X149.518 Y118.188 ; move to first infill point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7251.08
G1 X150.326 Y117.380 E0.05894 ; infill
G1 X151.028 Y117.380 E0.03623 ; infill
G1 X149.719 Y118.689 E0.09552 ; infill
G1 X149.719 Y118.868 E0.00921 ; infill
G1 X150.242 Y118.868 E0.02702 ; infill
G1 X151.552 Y117.559 E0.09553 ; infill
G1 X151.552 Y118.261 E0.03623 ; infill
G1 X150.744 Y119.069 E0.05895 ; infill
G1 F8640
G1 X151.552 Y118.261 E-0.26377 ; wipe and retract
G1 X151.552 Y117.559 E-0.16212 ; wipe and retract
G1 X150.528 Y118.582 E-0.33410 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X191.213 Y110.342 ; move to first perimeter point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X190.869 Y109.932 E0.02205 ; perimeter
G1 X193.518 Y107.709 E0.14246 ; perimeter
G1 X190.107 Y103.644 E0.21861 ; perimeter
G1 X187.458 Y105.867 E0.14246 ; perimeter
G1 X187.114 Y105.457 E0.02205 ; perimeter
G1 X189.763 Y103.234 E0.14246 ; perimeter
G1 X187.314 Y100.315 E0.15696 ; perimeter
G1 X187.822 Y99.889 E0.02729 ; perimeter
G1 X196.819 Y110.612 E0.57663 ; perimeter
G1 X196.311 Y111.038 E0.02729 ; perimeter
G1 X193.862 Y108.119 E0.15696 ; perimeter
G1 X191.259 Y110.303 E0.13999 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.164 Y110.900 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X190.311 Y109.883 E0.05471 ; perimeter
G1 X192.960 Y107.660 E0.14246 ; perimeter
G1 X190.058 Y104.202 E0.18596 ; perimeter
G1 X187.409 Y106.425 E0.14246 ; perimeter
G1 X186.556 Y105.408 E0.05471 ; perimeter
G1 X189.205 Y103.185 E0.14246 ; perimeter
G1 X186.756 Y100.266 E0.15696 ; perimeter
G1 X187.870 Y99.331 E0.05995 ; perimeter
G1 X197.377 Y110.661 E0.60929 ; perimeter
G1 X196.262 Y111.596 E0.05995 ; perimeter
G1 X193.813 Y108.678 E0.15696 ; perimeter
G1 X191.210 Y110.862 E0.13999 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.206 Y110.502 F10800.000 ; move inwards before travel
G1 F8640
G1 X190.311 Y109.883 E-0.30695 ; wipe and retract
G1 X191.814 Y108.622 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X145.715 Y138.884 ; move to first perimeter point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X145.712 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E1.06745 ; perimeter
G1 X197.437 Y116.689 E1.38818 ; perimeter
G1 X197.757 Y116.379 E0.01834 ; perimeter
G1 X198.041 Y116.010 E0.01918 ; perimeter
G1 X198.266 Y115.607 E0.01903 ; perimeter
G1 X198.423 Y115.177 E0.01884 ; perimeter
G1 X198.507 Y114.733 E0.01864 ; perimeter
G1 X198.511 Y114.284 E0.01847 ; perimeter
G1 X198.431 Y113.846 E0.01834 ; perimeter
G1 X198.266 Y113.435 E0.01826 ; perimeter
G1 X198.038 Y113.096 E0.01685 ; perimeter
G1 X197.273 Y112.184 E0.04901 ; perimeter
G1 X197.781 Y111.758 E0.02729 ; perimeter
G1 X198.670 Y112.818 E0.05700 ; perimeter
G1 X198.894 Y113.138 E0.01608 ; perimeter
G1 X199.052 Y113.473 E0.01526 ; perimeter
G1 X199.154 Y113.842 E0.01575 ; perimeter
G1 X199.198 Y114.240 E0.01652 ; perimeter
G1 X199.178 Y114.673 E0.01783 ; perimeter
G1 X199.097 Y115.098 E0.01784 ; perimeter
G1 X198.959 Y115.510 E0.01790 ; perimeter
G1 X198.712 Y116.006 E0.02280 ; perimeter
G1 X198.487 Y116.350 E0.01697 ; perimeter
G1 X198.166 Y116.736 E0.02066 ; perimeter
G1 X197.785 Y117.096 E0.02162 ; perimeter
G1 X171.819 Y138.884 E1.39638 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X145.775 Y138.884 E0.79463 ; perimeter
M204 S1000 ; adjust acceleration
G1 X145.320 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X145.314 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E1.07791 ; perimeter
G1 X197.172 Y116.394 E1.38165 ; perimeter
G1 X197.461 Y116.114 E0.01657 ; perimeter
G1 X197.709 Y115.792 E0.01678 ; perimeter
G1 X197.904 Y115.441 E0.01654 ; perimeter
G1 X198.040 Y115.072 E0.01621 ; perimeter
G1 X198.111 Y114.694 E0.01584 ; perimeter
G1 X198.115 Y114.318 E0.01546 ; perimeter
G1 X198.049 Y113.957 E0.01513 ; perimeter
G1 X197.914 Y113.622 E0.01489 ; perimeter
G1 X197.721 Y113.334 E0.01426 ; perimeter
G1 X196.715 Y112.135 E0.06447 ; perimeter
G1 X197.830 Y111.200 E0.05995 ; perimeter
G1 X198.985 Y112.577 E0.07404 ; perimeter
G1 X199.239 Y112.939 E0.01821 ; perimeter
G1 X199.425 Y113.335 E0.01804 ; perimeter
G1 X199.544 Y113.767 E0.01844 ; perimeter
G1 X199.595 Y114.228 E0.01911 ; perimeter
G1 X199.573 Y114.719 E0.02028 ; perimeter
G1 X199.481 Y115.199 E0.02011 ; perimeter
G1 X199.326 Y115.662 E0.02013 ; perimeter
G1 X199.057 Y116.203 E0.02489 ; perimeter
G1 X198.806 Y116.586 E0.01887 ; perimeter
G1 X198.455 Y117.007 E0.02258 ; perimeter
G1 X198.048 Y117.392 E0.02307 ; perimeter
G1 X171.963 Y139.280 E1.40280 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X145.380 Y139.280 E0.79455 ; perimeter
M204 S1000 ; adjust acceleration
G1 X145.527 Y138.938 F10800.000 ; move inwards before travel
G1 F8640
G1 X145.314 Y137.952 E-0.30702 ; wipe and retract
G1 X147.276 Y137.952 E-0.45298 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
G1 X166.558 Y138.860 ; move to first infill point
G1 Z11.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.776 Y139.642 E0.05566 ; infill
G1 X165.776 Y140.077 E0.02188 ; infill
G1 X166.026 Y140.077 E0.01260 ; infill
G1 X167.042 Y139.061 E0.07230 ; infill
G1 X167.727 Y139.061 E0.03448 ; infill
G1 X166.711 Y140.077 E0.07230 ; infill
G1 X167.396 Y140.077 E0.03448 ; infill
G1 X168.412 Y139.061 E0.07230 ; infill
G1 X169.097 Y139.061 E0.03448 ; infill
G1 X168.081 Y140.077 E0.07230 ; infill
G1 X168.766 Y140.077 E0.03448 ; infill
G1 X169.459 Y139.384 E0.04931 ; infill
G1 X169.459 Y140.069 E0.03448 ; infill
G1 X169.250 Y140.278 E0.01484 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;11.75


G1 F8640
G1 X169.459 Y140.069 E-0.06809 ; wipe and retract
G1 X169.459 Y139.384 E-0.15815 ; wipe and retract
G1 X168.766 Y140.077 E-0.22616 ; wipe and retract
G1 X168.081 Y140.077 E-0.15815 ; wipe and retract
G1 X168.539 Y139.619 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;11.75
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X103.609 Y100.738 ; move to first perimeter point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.78100 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X51.796 Y78.837 E1.40359 ; perimeter
G1 X51.415 Y78.477 E0.02158 ; perimeter
G1 X51.095 Y78.094 E0.02056 ; perimeter
G1 X50.830 Y77.684 E0.02010 ; perimeter
G1 X50.624 Y77.258 E0.01950 ; perimeter
G1 X50.483 Y76.835 E0.01837 ; perimeter
G1 X50.400 Y76.398 E0.01835 ; perimeter
G1 X50.383 Y75.980 E0.01724 ; perimeter
G1 X50.427 Y75.581 E0.01651 ; perimeter
G1 X50.530 Y75.213 E0.01576 ; perimeter
G1 X50.687 Y74.879 E0.01522 ; perimeter
G1 X50.910 Y74.560 E0.01604 ; perimeter
G1 X51.800 Y73.500 E0.05700 ; perimeter
G1 X52.307 Y73.926 E0.02729 ; perimeter
G1 X51.543 Y74.837 E0.04901 ; perimeter
G1 X51.314 Y75.176 E0.01685 ; perimeter
G1 X51.149 Y75.588 E0.01826 ; perimeter
G1 X51.069 Y76.026 E0.01834 ; perimeter
G1 X51.073 Y76.474 E0.01847 ; perimeter
G1 X51.157 Y76.919 E0.01864 ; perimeter
G1 X51.315 Y77.348 E0.01884 ; perimeter
G1 X51.540 Y77.752 E0.01903 ; perimeter
G1 X51.824 Y78.120 E0.01917 ; perimeter
G1 X52.143 Y78.430 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.39539 ; perimeter
G1 X103.610 Y100.203 E1.05127 ; perimeter
G1 X103.609 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X104.005 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.78099 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03672 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X51.532 Y79.133 E1.41002 ; perimeter
G1 X51.126 Y78.749 E0.02304 ; perimeter
G1 X50.776 Y78.330 E0.02252 ; perimeter
G1 X50.484 Y77.879 E0.02210 ; perimeter
G1 X50.256 Y77.408 E0.02157 ; perimeter
G1 X50.098 Y76.935 E0.02052 ; perimeter
G1 X50.005 Y76.443 E0.02064 ; perimeter
G1 X49.985 Y75.966 E0.01967 ; perimeter
G1 X50.037 Y75.506 E0.01908 ; perimeter
G1 X50.157 Y75.074 E0.01845 ; perimeter
G1 X50.343 Y74.679 E0.01799 ; perimeter
G1 X50.596 Y74.318 E0.01816 ; perimeter
G1 X51.751 Y72.941 E0.07404 ; perimeter
G1 X52.866 Y73.877 E0.05995 ; perimeter
G1 X51.860 Y75.076 E0.06447 ; perimeter
G1 X51.667 Y75.363 E0.01426 ; perimeter
G1 X51.532 Y75.698 E0.01489 ; perimeter
G1 X51.466 Y76.060 E0.01513 ; perimeter
G1 X51.469 Y76.435 E0.01546 ; perimeter
G1 X51.541 Y76.813 E0.01584 ; perimeter
G1 X51.676 Y77.182 E0.01621 ; perimeter
G1 X51.872 Y77.533 E0.01654 ; perimeter
G1 X52.120 Y77.856 E0.01678 ; perimeter
G1 X52.409 Y78.135 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.38886 ; perimeter
G1 X104.006 Y99.806 E1.06166 ; perimeter
G1 X104.006 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X103.606 Y101.127 F10800.000 ; move inwards before travel
G1 F8640
G1 X100.714 Y101.085 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X84.140 Y101.697 ; move to first infill point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.358 Y100.915 E0.05567 ; infill
G1 X82.673 Y100.915 E0.03448 ; infill
G1 X83.688 Y101.931 E0.07230 ; infill
G1 X83.003 Y101.931 E0.03448 ; infill
G1 X81.988 Y100.915 E0.07230 ; infill
G1 X81.303 Y100.915 E0.03448 ; infill
G1 X82.318 Y101.931 E0.07230 ; infill
G1 X81.634 Y101.931 E0.03448 ; infill
G1 X80.618 Y100.915 E0.07230 ; infill
G1 X80.256 Y100.915 E0.01821 ; infill
G1 X80.256 Y101.238 E0.01627 ; infill
G1 X80.949 Y101.931 E0.04930 ; infill
G1 X80.264 Y101.931 E0.03448 ; infill
G1 X80.055 Y101.722 E0.01483 ; infill
G1 F8640
G1 X80.264 Y101.931 E-0.06804 ; wipe and retract
G1 X80.949 Y101.931 E-0.15815 ; wipe and retract
G1 X80.256 Y101.238 E-0.22612 ; wipe and retract
G1 X80.256 Y100.915 E-0.07462 ; wipe and retract
G1 X80.618 Y100.915 E-0.08353 ; wipe and retract
G1 X81.076 Y101.373 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X58.362 Y72.079 ; move to first perimeter point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X55.718 Y69.860 E0.14219 ; perimeter
G1 X53.269 Y72.779 E0.15696 ; perimeter
G1 X52.762 Y72.353 E0.02729 ; perimeter
G1 X61.759 Y61.631 E0.57663 ; perimeter
G1 X62.267 Y62.057 E0.02729 ; perimeter
G1 X59.818 Y64.975 E0.15696 ; perimeter
G1 X62.462 Y67.194 E0.14219 ; perimeter
G1 X62.118 Y67.604 E0.02205 ; perimeter
G1 X59.474 Y65.385 E0.14219 ; perimeter
G1 X56.063 Y69.450 E0.21861 ; perimeter
G1 X58.707 Y71.669 E0.14219 ; perimeter
G1 X58.401 Y72.033 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.411 Y72.637 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X55.767 Y70.419 E0.14219 ; perimeter
G1 X53.318 Y73.337 E0.15696 ; perimeter
M73 Q54 S63
G1 X52.203 Y72.402 E0.05995 ; perimeter
G1 X61.710 Y61.072 E0.60929 ; perimeter
G1 X62.825 Y62.008 E0.05995 ; perimeter
G1 X60.376 Y64.926 E0.15696 ; perimeter
G1 X63.020 Y67.145 E0.14219 ; perimeter
G1 X62.166 Y68.162 E0.05471 ; perimeter
G1 X59.522 Y65.944 E0.14219 ; perimeter
G1 X56.621 Y69.402 E0.18596 ; perimeter
G1 X59.265 Y71.620 E0.14219 ; perimeter
G1 X58.450 Y72.592 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.139 Y72.345 F10800.000 ; move inwards before travel
G1 F8640
G1 X55.892 Y70.520 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X100.062 Y81.038 ; move to first perimeter point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.09123 ; perimeter
G1 X97.847 Y78.743 E0.09452 ; perimeter
G1 X100.062 Y78.743 E0.09123 ; perimeter
G1 X100.062 Y80.978 E0.09205 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.458 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.20050 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X66.493 Y61.328 E0.81986 ; perimeter
G1 X66.133 Y61.067 E0.01834 ; perimeter
G1 X65.720 Y60.852 E0.01917 ; perimeter
G1 X65.284 Y60.700 E0.01903 ; perimeter
G1 X64.834 Y60.620 E0.01884 ; perimeter
G1 X64.381 Y60.614 E0.01864 ; perimeter
G1 X63.939 Y60.688 E0.01847 ; perimeter
G1 X63.522 Y60.843 E0.01834 ; perimeter
G1 X63.308 Y60.976 E0.01039 ; perimeter
G1 X62.748 Y60.507 E0.03007 ; perimeter
M73 P54 R61
G1 X63.045 Y60.298 E0.01494 ; perimeter
G1 X63.390 Y60.133 E0.01575 ; perimeter
G1 X63.779 Y60.019 E0.01670 ; perimeter
G1 X64.190 Y59.964 E0.01708 ; perimeter
G1 X64.617 Y59.969 E0.01760 ; perimeter
G1 X65.074 Y60.036 E0.01901 ; perimeter
G1 X65.583 Y60.185 E0.02189 ; perimeter
G1 X65.981 Y60.355 E0.01779 ; perimeter
G1 X66.375 Y60.579 E0.01866 ; perimeter
G1 X66.836 Y60.917 E0.02356 ; perimeter
G1 X81.934 Y73.586 E0.81193 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y78.347 E0.10513 ; perimeter
G1 X100.458 Y78.347 E0.12389 ; perimeter
G1 X100.458 Y81.374 E0.12471 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.855 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.22277 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X66.249 Y61.641 E0.82522 ; perimeter
G1 X65.924 Y61.405 E0.01657 ; perimeter
G1 X65.563 Y61.216 E0.01678 ; perimeter
G1 X65.183 Y61.085 E0.01654 ; perimeter
G1 X64.796 Y61.016 E0.01621 ; perimeter
G1 X64.412 Y61.011 E0.01584 ; perimeter
G1 X64.041 Y61.073 E0.01546 ; perimeter
G1 X63.697 Y61.201 E0.01513 ; perimeter
G1 X63.390 Y61.392 E0.01489 ; perimeter
G1 X63.295 Y61.483 E0.00544 ; perimeter
G1 X62.163 Y60.533 E0.06089 ; perimeter
G1 X62.487 Y60.206 E0.01895 ; perimeter
G1 X62.844 Y59.955 E0.01799 ; perimeter
G1 X63.248 Y59.762 E0.01844 ; perimeter
G1 X63.696 Y59.630 E0.01927 ; perimeter
G1 X64.166 Y59.568 E0.01949 ; perimeter
G1 X64.648 Y59.573 E0.01987 ; perimeter
G1 X65.158 Y59.647 E0.02126 ; perimeter
G1 X65.717 Y59.811 E0.02400 ; perimeter
G1 X66.157 Y59.999 E0.01969 ; perimeter
G1 X66.590 Y60.245 E0.02054 ; perimeter
G1 X67.081 Y60.605 E0.02504 ; perimeter
G1 X82.078 Y73.189 E0.80652 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y77.950 E0.10513 ; perimeter
G1 X100.855 Y77.950 E0.15654 ; perimeter
G1 X100.855 Y81.770 E0.15736 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.469 Y81.725 F10800.000 ; move inwards before travel
G1 F8640
G1 X97.563 Y81.807 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X98.952 Y80.922 ; move to first infill point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7382.4
G1 X98.163 Y80.134 E0.05655 ; infill
G1 X98.163 Y79.444 E0.03495 ; infill
G1 X99.441 Y80.722 E0.09158 ; infill
G1 X99.746 Y80.722 E0.01546 ; infill
G1 X99.746 Y80.337 E0.01950 ; infill
G1 X98.468 Y79.059 E0.09159 ; infill
G1 X99.158 Y79.059 E0.03495 ; infill
G1 X99.947 Y79.848 E0.05656 ; infill
G1 F8640
G1 X99.158 Y79.059 E-0.25766 ; wipe and retract
G1 X98.468 Y79.059 E-0.15924 ; wipe and retract
G1 X99.519 Y80.110 E-0.34311 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X149.938 Y81.038 ; move to first perimeter point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.938 Y78.743 E0.09452 ; perimeter
G1 X152.153 Y78.743 E0.09123 ; perimeter
G1 X152.153 Y81.038 E0.09452 ; perimeter
G1 X149.998 Y81.038 E0.08876 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.542 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X149.542 Y78.347 E0.12718 ; perimeter
G1 X152.549 Y78.347 E0.12389 ; perimeter
G1 X152.549 Y80.899 E0.10513 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X183.166 Y60.915 E0.81201 ; perimeter
G1 X183.587 Y60.602 E0.02164 ; perimeter
G1 X183.952 Y60.391 E0.01737 ; perimeter
G1 X184.473 Y60.164 E0.02339 ; perimeter
G1 X184.924 Y60.036 E0.01935 ; perimeter
G1 X185.365 Y59.970 E0.01837 ; perimeter
G1 X185.811 Y59.965 E0.01835 ; perimeter
G1 X186.226 Y60.020 E0.01725 ; perimeter
G1 X186.600 Y60.129 E0.01606 ; perimeter
G1 X186.956 Y60.298 E0.01623 ; perimeter
G1 X187.252 Y60.507 E0.01491 ; perimeter
G1 X186.692 Y60.976 E0.03007 ; perimeter
G1 X186.478 Y60.843 E0.01039 ; perimeter
G1 X186.061 Y60.688 E0.01834 ; perimeter
G1 X185.619 Y60.614 E0.01847 ; perimeter
G1 X185.166 Y60.620 E0.01864 ; perimeter
G1 X184.716 Y60.700 E0.01884 ; perimeter
G1 X184.280 Y60.852 E0.01903 ; perimeter
G1 X183.873 Y61.064 E0.01889 ; perimeter
G1 X183.635 Y61.229 E0.01195 ; perimeter
G1 X168.261 Y74.121 E0.82653 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X149.602 Y81.434 E0.19803 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.145 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.145 Y77.950 E0.15984 ; perimeter
G1 X152.945 Y77.950 E0.15654 ; perimeter
G1 X152.945 Y80.502 E0.10513 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X182.920 Y60.604 E0.80655 ; perimeter
G1 X183.369 Y60.271 E0.02305 ; perimeter
G1 X183.773 Y60.037 E0.01923 ; perimeter
G1 X184.339 Y59.790 E0.02542 ; perimeter
G1 X184.841 Y59.647 E0.02151 ; perimeter
G1 X185.334 Y59.574 E0.02052 ; perimeter
G1 X185.835 Y59.568 E0.02064 ; perimeter
G1 X186.308 Y59.631 E0.01968 ; perimeter
G1 X186.742 Y59.758 E0.01860 ; perimeter
G1 X187.157 Y59.955 E0.01893 ; perimeter
G1 X187.513 Y60.206 E0.01798 ; perimeter
G1 X187.837 Y60.533 E0.01895 ; perimeter
G1 X186.705 Y61.483 E0.06089 ; perimeter
G1 X186.610 Y61.392 E0.00544 ; perimeter
G1 X186.303 Y61.201 E0.01489 ; perimeter
G1 X185.959 Y61.073 E0.01513 ; perimeter
G1 X185.588 Y61.011 E0.01546 ; perimeter
G1 X185.204 Y61.016 E0.01584 ; perimeter
G1 X184.817 Y61.085 E0.01621 ; perimeter
G1 X184.437 Y61.216 E0.01654 ; perimeter
G1 X184.079 Y61.404 E0.01667 ; perimeter
G1 X183.875 Y61.545 E0.01018 ; perimeter
G1 X168.405 Y74.517 E0.83171 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X149.205 Y81.830 E0.22030 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.288 Y81.457 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.154 Y78.539 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X151.043 Y80.922 ; move to first infill point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7382.42
G1 X150.254 Y80.134 E0.05655 ; infill
G1 X150.254 Y79.444 E0.03495 ; infill
G1 X151.532 Y80.722 E0.09158 ; infill
G1 X151.837 Y80.722 E0.01546 ; infill
G1 X151.837 Y80.337 E0.01950 ; infill
G1 X150.559 Y79.059 E0.09159 ; infill
G1 X151.249 Y79.059 E0.03495 ; infill
G1 X152.038 Y79.848 E0.05656 ; infill
G1 F8640
G1 X151.249 Y79.059 E-0.25765 ; wipe and retract
G1 X150.559 Y79.059 E-0.15924 ; wipe and retract
G1 X151.610 Y80.110 E-0.34311 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X191.638 Y72.079 ; move to first perimeter point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X191.293 Y71.669 E0.02205 ; perimeter
G1 X193.937 Y69.450 E0.14219 ; perimeter
G1 X190.526 Y65.385 E0.21861 ; perimeter
G1 X187.882 Y67.604 E0.14219 ; perimeter
G1 X187.538 Y67.194 E0.02205 ; perimeter
G1 X190.182 Y64.975 E0.14219 ; perimeter
G1 X187.733 Y62.057 E0.15696 ; perimeter
G1 X188.241 Y61.631 E0.02729 ; perimeter
G1 X197.238 Y72.353 E0.57663 ; perimeter
G1 X196.731 Y72.779 E0.02729 ; perimeter
G1 X194.282 Y69.860 E0.15696 ; perimeter
G1 X191.683 Y72.041 E0.13972 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.589 Y72.637 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X190.735 Y71.620 E0.05471 ; perimeter
G1 X193.379 Y69.402 E0.14219 ; perimeter
G1 X190.478 Y65.944 E0.18596 ; perimeter
G1 X187.834 Y68.162 E0.14219 ; perimeter
G1 X186.980 Y67.145 E0.05471 ; perimeter
G1 X189.624 Y64.926 E0.14219 ; perimeter
G1 X187.175 Y62.008 E0.15696 ; perimeter
G1 X188.290 Y61.072 E0.05995 ; perimeter
G1 X197.797 Y72.402 E0.60929 ; perimeter
G1 X196.682 Y73.337 E0.05995 ; perimeter
G1 X194.233 Y70.419 E0.15696 ; perimeter
G1 X191.635 Y72.599 E0.13972 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.630 Y72.240 F10800.000 ; move inwards before travel
G1 F8640
G1 X190.735 Y71.620 E-0.30695 ; wipe and retract
G1 X192.238 Y70.359 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X146.391 Y100.738 ; move to first perimeter point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X146.390 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E1.05127 ; perimeter
G1 X197.857 Y78.430 E1.39539 ; perimeter
G1 X198.176 Y78.120 E0.01834 ; perimeter
G1 X198.460 Y77.752 E0.01918 ; perimeter
G1 X198.685 Y77.348 E0.01903 ; perimeter
G1 X198.843 Y76.919 E0.01884 ; perimeter
G1 X198.927 Y76.474 E0.01864 ; perimeter
G1 X198.931 Y76.026 E0.01847 ; perimeter
G1 X198.851 Y75.588 E0.01834 ; perimeter
G1 X198.688 Y75.183 E0.01796 ; perimeter
G1 X198.524 Y74.926 E0.01256 ; perimeter
G1 X197.691 Y73.927 E0.05359 ; perimeter
G1 X198.200 Y73.500 E0.02738 ; perimeter
G1 X199.090 Y74.560 E0.05700 ; perimeter
G1 X199.312 Y74.877 E0.01598 ; perimeter
G1 X199.475 Y75.227 E0.01589 ; perimeter
G1 X199.573 Y75.581 E0.01513 ; perimeter
G1 X199.617 Y75.979 E0.01651 ; perimeter
G1 X199.599 Y76.403 E0.01746 ; perimeter
G1 X199.517 Y76.835 E0.01812 ; perimeter
G1 X199.377 Y77.255 E0.01825 ; perimeter
G1 X199.141 Y77.732 E0.02193 ; perimeter
G1 X198.905 Y78.093 E0.01775 ; perimeter
G1 X198.585 Y78.477 E0.02061 ; perimeter
G1 X198.204 Y78.837 E0.02158 ; perimeter
G1 X172.104 Y100.738 E1.40359 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X146.451 Y100.738 E0.77853 ; perimeter
M204 S1000 ; adjust acceleration
G1 X145.995 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X145.994 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E1.06166 ; perimeter
G1 X197.591 Y78.135 E1.38886 ; perimeter
G1 X197.880 Y77.856 E0.01657 ; perimeter
G1 X198.129 Y77.533 E0.01678 ; perimeter
G1 X198.324 Y77.182 E0.01654 ; perimeter
G1 X198.459 Y76.813 E0.01621 ; perimeter
G1 X198.531 Y76.435 E0.01584 ; perimeter
G1 X198.534 Y76.060 E0.01546 ; perimeter
G1 X198.468 Y75.698 E0.01513 ; perimeter
G1 X198.334 Y75.365 E0.01478 ; perimeter
G1 X198.204 Y75.161 E0.01000 ; perimeter
G1 X197.134 Y73.877 E0.06884 ; perimeter
G1 X198.249 Y72.941 E0.05998 ; perimeter
G1 X199.404 Y74.318 E0.07404 ; perimeter
G1 X199.657 Y74.679 E0.01814 ; perimeter
G1 X199.848 Y75.090 E0.01867 ; perimeter
G1 X199.963 Y75.506 E0.01778 ; perimeter
G1 X200.015 Y75.966 E0.01908 ; perimeter
G1 X199.994 Y76.449 E0.01990 ; perimeter
G1 X199.902 Y76.935 E0.02041 ; perimeter
G1 X199.744 Y77.407 E0.02048 ; perimeter
G1 X199.485 Y77.929 E0.02402 ; perimeter
G1 X199.224 Y78.329 E0.01967 ; perimeter
G1 X198.874 Y78.749 E0.02253 ; perimeter
G1 X198.468 Y79.133 E0.02304 ; perimeter
G1 X172.248 Y101.134 E1.41002 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X146.055 Y101.134 E0.77852 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.202 Y100.792 F10800.000 ; move inwards before travel
G1 F8640
G1 X145.994 Y99.806 E-0.30696 ; wipe and retract
G1 X147.956 Y99.806 E-0.45304 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X165.860 Y101.722 ; move to first infill point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.069 Y101.931 E0.01484 ; infill
G1 X166.754 Y101.931 E0.03448 ; infill
G1 X166.061 Y101.238 E0.04930 ; infill
G1 X166.061 Y100.915 E0.01627 ; infill
G1 X166.423 Y100.915 E0.01821 ; infill
G1 X167.439 Y101.931 E0.07230 ; infill
G1 X168.124 Y101.931 E0.03448 ; infill
G1 X167.108 Y100.915 E0.07230 ; infill
G1 X167.793 Y100.915 E0.03448 ; infill
G1 X168.808 Y101.931 E0.07230 ; infill
G1 X169.493 Y101.931 E0.03448 ; infill
G1 X168.478 Y100.915 E0.07230 ; infill
G1 X169.163 Y100.915 E0.03448 ; infill
G1 X169.945 Y101.697 E0.05567 ; infill
G1 F8640
G1 X169.163 Y100.915 E-0.25535 ; wipe and retract
G1 X168.478 Y100.915 E-0.15815 ; wipe and retract
G1 X169.493 Y101.931 E-0.33164 ; wipe and retract
G1 X169.429 Y101.931 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X103.324 Y138.884 ; move to first perimeter point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.78100 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X51.511 Y116.983 E1.40359 ; perimeter
G1 X51.130 Y116.624 E0.02158 ; perimeter
G1 X50.810 Y116.240 E0.02056 ; perimeter
G1 X50.545 Y115.831 E0.02010 ; perimeter
G1 X50.339 Y115.404 E0.01950 ; perimeter
G1 X50.198 Y114.981 E0.01837 ; perimeter
G1 X50.115 Y114.544 E0.01835 ; perimeter
G1 X50.097 Y114.126 E0.01724 ; perimeter
G1 X50.142 Y113.728 E0.01651 ; perimeter
G1 X50.245 Y113.359 E0.01576 ; perimeter
G1 X50.402 Y113.025 E0.01522 ; perimeter
G1 X50.625 Y112.706 E0.01604 ; perimeter
G1 X51.515 Y111.646 E0.05700 ; perimeter
G1 X52.022 Y112.072 E0.02729 ; perimeter
G1 X51.257 Y112.983 E0.04901 ; perimeter
G1 X51.029 Y113.323 E0.01685 ; perimeter
G1 X50.864 Y113.734 E0.01826 ; perimeter
G1 X50.784 Y114.172 E0.01834 ; perimeter
G1 X50.788 Y114.620 E0.01847 ; perimeter
G1 X50.872 Y115.065 E0.01864 ; perimeter
G1 X51.030 Y115.494 E0.01884 ; perimeter
G1 X51.254 Y115.898 E0.01903 ; perimeter
G1 X51.538 Y116.266 E0.01917 ; perimeter
G1 X51.858 Y116.576 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.39539 ; perimeter
G1 X103.325 Y138.349 E1.05127 ; perimeter
G1 X103.324 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X103.720 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.78099 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03672 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X51.247 Y117.280 E1.41002 ; perimeter
G1 X50.841 Y116.896 E0.02304 ; perimeter
G1 X50.491 Y116.476 E0.02252 ; perimeter
G1 X50.199 Y116.025 E0.02210 ; perimeter
G1 X49.971 Y115.554 E0.02157 ; perimeter
G1 X49.813 Y115.082 E0.02052 ; perimeter
G1 X49.720 Y114.589 E0.02064 ; perimeter
G1 X49.700 Y114.112 E0.01967 ; perimeter
G1 X49.752 Y113.652 E0.01908 ; perimeter
G1 X49.872 Y113.220 E0.01845 ; perimeter
G1 X50.058 Y112.825 E0.01799 ; perimeter
G1 X50.311 Y112.464 E0.01816 ; perimeter
G1 X51.466 Y111.088 E0.07404 ; perimeter
G1 X52.581 Y112.023 E0.05995 ; perimeter
G1 X51.575 Y113.222 E0.06447 ; perimeter
G1 X51.382 Y113.509 E0.01426 ; perimeter
G1 X51.247 Y113.844 E0.01489 ; perimeter
G1 X51.181 Y114.206 E0.01513 ; perimeter
G1 X51.184 Y114.581 E0.01546 ; perimeter
G1 X51.255 Y114.959 E0.01584 ; perimeter
G1 X51.391 Y115.328 E0.01621 ; perimeter
G1 X51.586 Y115.679 E0.01654 ; perimeter
G1 X51.835 Y116.002 E0.01678 ; perimeter
G1 X52.124 Y116.282 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.38886 ; perimeter
G1 X103.721 Y137.952 E1.06166 ; perimeter
G1 X103.720 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X103.320 Y139.274 F10800.000 ; move inwards before travel
G1 F8640
G1 X100.429 Y139.231 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X83.854 Y139.843 ; move to first infill point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.072 Y139.061 E0.05567 ; infill
G1 X82.388 Y139.061 E0.03448 ; infill
G1 X83.403 Y140.077 E0.07230 ; infill
G1 X82.718 Y140.077 E0.03448 ; infill
G1 X81.703 Y139.061 E0.07230 ; infill
G1 X81.018 Y139.061 E0.03448 ; infill
G1 X82.033 Y140.077 E0.07230 ; infill
G1 X81.348 Y140.077 E0.03448 ; infill
G1 X80.333 Y139.061 E0.07230 ; infill
G1 X79.971 Y139.061 E0.01821 ; infill
G1 X79.971 Y139.384 E0.01627 ; infill
G1 X80.663 Y140.077 E0.04930 ; infill
G1 X79.978 Y140.077 E0.03448 ; infill
G1 X79.770 Y139.868 E0.01483 ; infill
G1 F8640
G1 X79.978 Y140.077 E-0.06804 ; wipe and retract
G1 X80.663 Y140.077 E-0.15815 ; wipe and retract
G1 X79.971 Y139.384 E-0.22612 ; wipe and retract
G1 X79.971 Y139.061 E-0.07462 ; wipe and retract
G1 X80.333 Y139.061 E-0.08353 ; wipe and retract
G1 X80.791 Y139.519 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X58.077 Y110.225 ; move to first perimeter point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X55.433 Y108.007 E0.14219 ; perimeter
G1 X52.984 Y110.925 E0.15696 ; perimeter
G1 X52.477 Y110.499 E0.02729 ; perimeter
G1 X61.474 Y99.777 E0.57663 ; perimeter
G1 X61.982 Y100.203 E0.02729 ; perimeter
G1 X59.533 Y103.121 E0.15696 ; perimeter
G1 X62.177 Y105.340 E0.14219 ; perimeter
G1 X61.832 Y105.750 E0.02205 ; perimeter
G1 X59.188 Y103.531 E0.14219 ; perimeter
G1 X55.777 Y107.597 E0.21861 ; perimeter
G1 X58.421 Y109.815 E0.14219 ; perimeter
G1 X58.116 Y110.179 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.126 Y110.784 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X55.482 Y108.565 E0.14219 ; perimeter
G1 X53.033 Y111.484 E0.15696 ; perimeter
G1 X51.918 Y110.548 E0.05995 ; perimeter
G1 X61.425 Y99.218 E0.60929 ; perimeter
G1 X62.540 Y100.154 E0.05995 ; perimeter
G1 X60.091 Y103.072 E0.15696 ; perimeter
G1 X62.735 Y105.291 E0.14219 ; perimeter
G1 X61.881 Y106.308 E0.05471 ; perimeter
G1 X59.237 Y104.090 E0.14219 ; perimeter
G1 X56.336 Y107.548 E0.18596 ; perimeter
G1 X58.980 Y109.766 E0.14219 ; perimeter
G1 X58.165 Y110.738 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.853 Y110.491 F10800.000 ; move inwards before travel
G1 F8640
G1 X55.607 Y108.666 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X99.777 Y119.184 ; move to first perimeter point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.09123 ; perimeter
G1 X97.562 Y116.889 E0.09452 ; perimeter
G1 X99.777 Y116.889 E0.09123 ; perimeter
G1 X99.777 Y119.124 E0.09205 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.173 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.20050 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X66.208 Y99.474 E0.81986 ; perimeter
G1 X65.848 Y99.213 E0.01834 ; perimeter
G1 X65.435 Y98.998 E0.01917 ; perimeter
G1 X64.999 Y98.847 E0.01903 ; perimeter
G1 X64.549 Y98.766 E0.01884 ; perimeter
G1 X64.096 Y98.760 E0.01864 ; perimeter
G1 X63.654 Y98.834 E0.01847 ; perimeter
G1 X63.236 Y98.989 E0.01834 ; perimeter
G1 X63.022 Y99.122 E0.01039 ; perimeter
G1 X62.463 Y98.653 E0.03007 ; perimeter
G1 X62.760 Y98.444 E0.01494 ; perimeter
G1 X63.105 Y98.279 E0.01575 ; perimeter
G1 X63.494 Y98.165 E0.01670 ; perimeter
G1 X63.904 Y98.111 E0.01708 ; perimeter
G1 X64.332 Y98.115 E0.01760 ; perimeter
G1 X64.788 Y98.182 E0.01901 ; perimeter
G1 X65.298 Y98.331 E0.02189 ; perimeter
G1 X65.696 Y98.501 E0.01779 ; perimeter
G1 X66.089 Y98.725 E0.01866 ; perimeter
G1 X66.551 Y99.063 E0.02356 ; perimeter
G1 X81.649 Y111.732 E0.81193 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y116.493 E0.10513 ; perimeter
G1 X100.173 Y116.493 E0.12389 ; perimeter
G1 X100.173 Y119.520 E0.12471 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.569 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.22277 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X65.964 Y99.787 E0.82522 ; perimeter
G1 X65.638 Y99.551 E0.01657 ; perimeter
G1 X65.278 Y99.363 E0.01678 ; perimeter
G1 X64.898 Y99.231 E0.01654 ; perimeter
G1 X64.511 Y99.162 E0.01621 ; perimeter
G1 X64.126 Y99.157 E0.01584 ; perimeter
G1 X63.756 Y99.219 E0.01546 ; perimeter
G1 X63.412 Y99.347 E0.01513 ; perimeter
G1 X63.105 Y99.538 E0.01489 ; perimeter
G1 X63.010 Y99.629 E0.00544 ; perimeter
G1 X61.878 Y98.679 E0.06089 ; perimeter
G1 X62.202 Y98.353 E0.01895 ; perimeter
G1 X62.559 Y98.101 E0.01799 ; perimeter
G1 X62.962 Y97.908 E0.01844 ; perimeter
G1 X63.411 Y97.776 E0.01927 ; perimeter
G1 X63.880 Y97.714 E0.01949 ; perimeter
G1 X64.363 Y97.719 E0.01987 ; perimeter
G1 X64.873 Y97.794 E0.02126 ; perimeter
G1 X65.432 Y97.957 E0.02400 ; perimeter
G1 X65.872 Y98.145 E0.01969 ; perimeter
G1 X66.305 Y98.392 E0.02054 ; perimeter
G1 X66.795 Y98.751 E0.02504 ; perimeter
G1 X81.793 Y111.335 E0.80652 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y116.096 E0.10513 ; perimeter
G1 X100.569 Y116.096 E0.15654 ; perimeter
G1 X100.569 Y119.916 E0.15736 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.183 Y119.872 F10800.000 ; move inwards before travel
G1 F8640
G1 X97.278 Y119.953 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X98.667 Y119.069 ; move to first infill point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7382.4
G1 X97.878 Y118.280 E0.05655 ; infill
G1 X97.878 Y117.590 E0.03495 ; infill
G1 X99.156 Y118.868 E0.09158 ; infill
G1 X99.461 Y118.868 E0.01546 ; infill
G1 X99.461 Y118.483 E0.01950 ; infill
G1 X98.183 Y117.205 E0.09159 ; infill
G1 X98.873 Y117.205 E0.03495 ; infill
G1 X99.662 Y117.994 E0.05656 ; infill
G1 F8640
G1 X98.873 Y117.205 E-0.25766 ; wipe and retract
G1 X98.183 Y117.205 E-0.15924 ; wipe and retract
G1 X99.234 Y118.256 E-0.34311 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X149.653 Y119.184 ; move to first perimeter point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q55 S62
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.653 Y116.889 E0.09452 ; perimeter
G1 X151.868 Y116.889 E0.09123 ; perimeter
G1 X151.868 Y119.184 E0.09452 ; perimeter
G1 X149.713 Y119.184 E0.08876 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.257 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X149.257 Y116.493 E0.12718 ; perimeter
G1 X152.264 Y116.493 E0.12389 ; perimeter
G1 X152.264 Y119.045 E0.10513 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X182.881 Y99.062 E0.81201 ; perimeter
G1 X183.302 Y98.748 E0.02164 ; perimeter
G1 X183.667 Y98.537 E0.01737 ; perimeter
G1 X184.187 Y98.310 E0.02339 ; perimeter
G1 X184.639 Y98.182 E0.01935 ; perimeter
G1 X185.080 Y98.116 E0.01837 ; perimeter
G1 X185.526 Y98.111 E0.01835 ; perimeter
G1 X185.941 Y98.166 E0.01725 ; perimeter
G1 X186.315 Y98.275 E0.01606 ; perimeter
G1 X186.671 Y98.445 E0.01623 ; perimeter
G1 X186.966 Y98.653 E0.01491 ; perimeter
G1 X186.407 Y99.122 E0.03007 ; perimeter
G1 X186.193 Y98.989 E0.01039 ; perimeter
G1 X185.776 Y98.834 E0.01834 ; perimeter
G1 X185.334 Y98.760 E0.01847 ; perimeter
G1 X184.881 Y98.766 E0.01864 ; perimeter
G1 X184.431 Y98.847 E0.01884 ; perimeter
G1 X183.994 Y98.998 E0.01903 ; perimeter
G1 X183.588 Y99.210 E0.01889 ; perimeter
G1 X183.349 Y99.375 E0.01195 ; perimeter
G1 X167.976 Y112.267 E0.82653 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X149.317 Y119.580 E0.19803 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.860 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X148.860 Y116.096 E0.15984 ; perimeter
G1 X152.660 Y116.096 E0.15654 ; perimeter
G1 X152.660 Y118.648 E0.10513 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X182.635 Y98.751 E0.80655 ; perimeter
G1 X183.084 Y98.417 E0.02305 ; perimeter
G1 X183.488 Y98.183 E0.01923 ; perimeter
G1 X184.053 Y97.936 E0.02542 ; perimeter
G1 X184.556 Y97.794 E0.02151 ; perimeter
G1 X185.048 Y97.720 E0.02052 ; perimeter
G1 X185.549 Y97.714 E0.02064 ; perimeter
G1 X186.023 Y97.777 E0.01968 ; perimeter
G1 X186.456 Y97.904 E0.01860 ; perimeter
G1 X186.871 Y98.101 E0.01893 ; perimeter
G1 X187.228 Y98.353 E0.01798 ; perimeter
G1 X187.552 Y98.679 E0.01895 ; perimeter
G1 X186.420 Y99.629 E0.06089 ; perimeter
G1 X186.325 Y99.538 E0.00544 ; perimeter
G1 X186.018 Y99.347 E0.01489 ; perimeter
G1 X185.673 Y99.219 E0.01513 ; perimeter
G1 X185.303 Y99.157 E0.01546 ; perimeter
G1 X184.919 Y99.162 E0.01584 ; perimeter
G1 X184.531 Y99.231 E0.01621 ; perimeter
G1 X184.152 Y99.363 E0.01654 ; perimeter
G1 X183.793 Y99.550 E0.01667 ; perimeter
G1 X183.590 Y99.691 E0.01018 ; perimeter
G1 X168.120 Y112.663 E0.83171 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X148.920 Y119.976 E0.22030 ; perimeter
M73 P55 R60
M204 S1000 ; adjust acceleration
G1 X149.003 Y119.603 F10800.000 ; move inwards before travel
G1 F8640
G1 X148.869 Y116.685 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X150.758 Y119.069 ; move to first infill point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7382.42
G1 X149.969 Y118.280 E0.05655 ; infill
G1 X149.969 Y117.590 E0.03495 ; infill
G1 X151.247 Y118.868 E0.09158 ; infill
G1 X151.552 Y118.868 E0.01546 ; infill
G1 X151.552 Y118.483 E0.01950 ; infill
G1 X150.274 Y117.205 E0.09159 ; infill
G1 X150.963 Y117.205 E0.03495 ; infill
G1 X151.752 Y117.994 E0.05656 ; infill
G1 F8640
G1 X150.963 Y117.205 E-0.25765 ; wipe and retract
G1 X150.274 Y117.205 E-0.15924 ; wipe and retract
G1 X151.324 Y118.256 E-0.34311 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X191.352 Y110.225 ; move to first perimeter point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X191.008 Y109.815 E0.02205 ; perimeter
G1 X193.652 Y107.597 E0.14219 ; perimeter
G1 X190.241 Y103.531 E0.21861 ; perimeter
G1 X187.597 Y105.750 E0.14219 ; perimeter
G1 X187.253 Y105.340 E0.02205 ; perimeter
G1 X189.897 Y103.121 E0.14219 ; perimeter
G1 X187.448 Y100.203 E0.15696 ; perimeter
G1 X187.956 Y99.777 E0.02729 ; perimeter
G1 X196.953 Y110.499 E0.57663 ; perimeter
G1 X196.445 Y110.925 E0.02729 ; perimeter
G1 X193.996 Y108.007 E0.15696 ; perimeter
G1 X191.398 Y110.187 E0.13972 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.303 Y110.784 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X190.450 Y109.766 E0.05471 ; perimeter
G1 X193.094 Y107.548 E0.14219 ; perimeter
G1 X190.192 Y104.090 E0.18596 ; perimeter
G1 X187.548 Y106.308 E0.14219 ; perimeter
G1 X186.695 Y105.291 E0.05471 ; perimeter
G1 X189.339 Y103.072 E0.14219 ; perimeter
G1 X186.890 Y100.154 E0.15696 ; perimeter
G1 X188.005 Y99.218 E0.05995 ; perimeter
G1 X197.511 Y110.548 E0.60929 ; perimeter
G1 X196.397 Y111.484 E0.05995 ; perimeter
G1 X193.948 Y108.565 E0.15696 ; perimeter
G1 X191.349 Y110.745 E0.13972 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.345 Y110.386 F10800.000 ; move inwards before travel
G1 F8640
G1 X190.450 Y109.766 E-0.30695 ; wipe and retract
G1 X191.953 Y108.505 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X146.105 Y138.884 ; move to first perimeter point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X146.105 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E1.05127 ; perimeter
G1 X197.572 Y116.576 E1.39539 ; perimeter
G1 X197.891 Y116.266 E0.01834 ; perimeter
G1 X198.175 Y115.898 E0.01918 ; perimeter
G1 X198.400 Y115.494 E0.01903 ; perimeter
G1 X198.558 Y115.065 E0.01884 ; perimeter
G1 X198.641 Y114.620 E0.01864 ; perimeter
G1 X198.645 Y114.172 E0.01847 ; perimeter
G1 X198.566 Y113.734 E0.01834 ; perimeter
G1 X198.403 Y113.329 E0.01796 ; perimeter
G1 X198.239 Y113.072 E0.01256 ; perimeter
G1 X197.406 Y112.073 E0.05359 ; perimeter
G1 X197.915 Y111.646 E0.02738 ; perimeter
G1 X198.804 Y112.706 E0.05700 ; perimeter
G1 X199.027 Y113.024 E0.01598 ; perimeter
G1 X199.190 Y113.373 E0.01589 ; perimeter
G1 X199.288 Y113.727 E0.01513 ; perimeter
G1 X199.332 Y114.126 E0.01651 ; perimeter
G1 X199.314 Y114.549 E0.01746 ; perimeter
G1 X199.232 Y114.981 E0.01812 ; perimeter
G1 X199.092 Y115.402 E0.01825 ; perimeter
G1 X198.855 Y115.879 E0.02193 ; perimeter
G1 X198.620 Y116.239 E0.01775 ; perimeter
G1 X198.300 Y116.624 E0.02061 ; perimeter
G1 X197.919 Y116.983 E0.02158 ; perimeter
G1 X171.819 Y138.884 E1.40359 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X146.165 Y138.884 E0.77853 ; perimeter
M204 S1000 ; adjust acceleration
G1 X145.709 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X145.708 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E1.06166 ; perimeter
G1 X197.306 Y116.282 E1.38886 ; perimeter
G1 X197.595 Y116.002 E0.01657 ; perimeter
G1 X197.843 Y115.679 E0.01678 ; perimeter
G1 X198.038 Y115.328 E0.01654 ; perimeter
G1 X198.174 Y114.959 E0.01621 ; perimeter
G1 X198.245 Y114.581 E0.01584 ; perimeter
G1 X198.249 Y114.206 E0.01546 ; perimeter
G1 X198.183 Y113.844 E0.01513 ; perimeter
G1 X198.049 Y113.512 E0.01478 ; perimeter
G1 X197.918 Y113.307 E0.01000 ; perimeter
G1 X196.848 Y112.023 E0.06884 ; perimeter
G1 X197.964 Y111.088 E0.05998 ; perimeter
G1 X199.119 Y112.464 E0.07404 ; perimeter
G1 X199.372 Y112.825 E0.01814 ; perimeter
G1 X199.563 Y113.236 E0.01867 ; perimeter
G1 X199.678 Y113.652 E0.01778 ; perimeter
G1 X199.729 Y114.112 E0.01908 ; perimeter
G1 X199.709 Y114.595 E0.01990 ; perimeter
G1 X199.616 Y115.081 E0.02041 ; perimeter
G1 X199.459 Y115.553 E0.02048 ; perimeter
G1 X199.200 Y116.075 E0.02402 ; perimeter
G1 X198.939 Y116.475 E0.01967 ; perimeter
G1 X198.589 Y116.896 E0.02253 ; perimeter
G1 X198.183 Y117.280 E0.02304 ; perimeter
G1 X171.963 Y139.280 E1.41002 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X145.769 Y139.280 E0.77852 ; perimeter
M204 S1000 ; adjust acceleration
G1 X145.917 Y138.938 F10800.000 ; move inwards before travel
G1 F8640
G1 X145.708 Y137.952 E-0.30696 ; wipe and retract
G1 X147.671 Y137.952 E-0.45304 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
G1 X165.575 Y139.868 ; move to first infill point
G1 Z11.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.784 Y140.077 E0.01484 ; infill
G1 X166.469 Y140.077 E0.03448 ; infill
G1 X165.776 Y139.384 E0.04930 ; infill
G1 X165.776 Y139.061 E0.01627 ; infill
G1 X166.138 Y139.061 E0.01821 ; infill
G1 X167.153 Y140.077 E0.07230 ; infill
G1 X167.838 Y140.077 E0.03448 ; infill
G1 X166.823 Y139.061 E0.07230 ; infill
G1 X167.508 Y139.061 E0.03448 ; infill
G1 X168.523 Y140.077 E0.07230 ; infill
G1 X169.208 Y140.077 E0.03448 ; infill
G1 X168.193 Y139.061 E0.07230 ; infill
G1 X168.878 Y139.061 E0.03448 ; infill
G1 X169.660 Y139.843 E0.05567 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;12


G1 F8640
G1 X168.878 Y139.061 E-0.25535 ; wipe and retract
G1 X168.193 Y139.061 E-0.15815 ; wipe and retract
G1 X169.208 Y140.077 E-0.33164 ; wipe and retract
G1 X169.144 Y140.077 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;12
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X103.219 Y100.738 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.76490 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X51.662 Y78.725 E1.41080 ; perimeter
G1 X51.282 Y78.366 E0.02155 ; perimeter
G1 X50.962 Y77.983 E0.02053 ; perimeter
G1 X50.697 Y77.574 E0.02007 ; perimeter
G1 X50.491 Y77.149 E0.01947 ; perimeter
G1 X50.348 Y76.718 E0.01869 ; perimeter
G1 X50.266 Y76.282 E0.01828 ; perimeter
G1 X50.249 Y75.880 E0.01658 ; perimeter
G1 X50.294 Y75.465 E0.01722 ; perimeter
G1 X50.396 Y75.098 E0.01567 ; perimeter
G1 X50.553 Y74.765 E0.01517 ; perimeter
G1 X50.776 Y74.447 E0.01600 ; perimeter
G1 X51.666 Y73.387 E0.05700 ; perimeter
G1 X52.173 Y73.813 E0.02729 ; perimeter
G1 X51.409 Y74.725 E0.04901 ; perimeter
G1 X51.180 Y75.064 E0.01685 ; perimeter
G1 X51.015 Y75.475 E0.01826 ; perimeter
G1 X50.935 Y75.913 E0.01834 ; perimeter
G1 X50.939 Y76.361 E0.01847 ; perimeter
G1 X51.023 Y76.806 E0.01864 ; perimeter
G1 X51.181 Y77.235 E0.01884 ; perimeter
G1 X51.405 Y77.639 E0.01903 ; perimeter
G1 X51.690 Y78.008 E0.01917 ; perimeter
G1 X52.009 Y78.317 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.40260 ; perimeter
G1 X103.217 Y100.203 E1.03508 ; perimeter
G1 X103.218 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X103.616 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.76496 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03672 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X51.398 Y79.021 E1.41723 ; perimeter
G1 X50.992 Y78.638 E0.02300 ; perimeter
G1 X50.643 Y78.218 E0.02248 ; perimeter
G1 X50.351 Y77.769 E0.02207 ; perimeter
G1 X50.123 Y77.299 E0.02153 ; perimeter
G1 X49.963 Y76.818 E0.02086 ; perimeter
G1 X49.871 Y76.327 E0.02057 ; perimeter
G1 X49.851 Y75.867 E0.01898 ; perimeter
G1 X49.903 Y75.389 E0.01980 ; perimeter
G1 X50.024 Y74.960 E0.01838 ; perimeter
G1 X50.209 Y74.566 E0.01794 ; perimeter
G1 X50.462 Y74.206 E0.01811 ; perimeter
G1 X51.617 Y72.829 E0.07404 ; perimeter
G1 X52.732 Y73.764 E0.05995 ; perimeter
G1 X51.726 Y74.963 E0.06447 ; perimeter
G1 X51.533 Y75.250 E0.01426 ; perimeter
G1 X51.398 Y75.586 E0.01489 ; perimeter
G1 X51.332 Y75.947 E0.01513 ; perimeter
G1 X51.335 Y76.323 E0.01546 ; perimeter
G1 X51.407 Y76.700 E0.01584 ; perimeter
G1 X51.542 Y77.070 E0.01621 ; perimeter
G1 X51.737 Y77.421 E0.01654 ; perimeter
G1 X51.986 Y77.743 E0.01678 ; perimeter
G1 X52.275 Y78.023 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.39607 ; perimeter
G1 X103.612 Y99.806 E1.04541 ; perimeter
G1 X103.616 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X103.216 Y101.127 F10800.000 ; move inwards before travel
G1 F8640
G1 X100.325 Y101.085 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X83.730 Y102.131 ; move to first infill point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.939 Y101.923 E0.01484 ; infill
G1 X83.939 Y101.238 E0.03448 ; infill
G1 X83.246 Y101.931 E0.04931 ; infill
G1 X82.561 Y101.931 E0.03448 ; infill
G1 X83.577 Y100.915 E0.07230 ; infill
G1 X82.892 Y100.915 E0.03448 ; infill
G1 X81.876 Y101.931 E0.07230 ; infill
G1 X81.191 Y101.931 E0.03448 ; infill
G1 X82.207 Y100.915 E0.07230 ; infill
G1 X81.522 Y100.915 E0.03448 ; infill
G1 X80.506 Y101.931 E0.07230 ; infill
G1 X80.256 Y101.931 E0.01260 ; infill
G1 X80.256 Y101.496 E0.02188 ; infill
G1 X81.038 Y100.714 E0.05566 ; infill
G1 F8640
G1 X80.256 Y101.496 E-0.25530 ; wipe and retract
G1 X80.256 Y101.931 E-0.10036 ; wipe and retract
G1 X80.506 Y101.931 E-0.05779 ; wipe and retract
G1 X81.522 Y100.915 E-0.33164 ; wipe and retract
G1 X81.587 Y100.915 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X58.223 Y71.962 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X55.584 Y69.748 E0.14192 ; perimeter
G1 X53.135 Y72.667 E0.15696 ; perimeter
G1 X52.628 Y72.241 E0.02729 ; perimeter
G1 X61.625 Y61.518 E0.57663 ; perimeter
G1 X62.133 Y61.944 E0.02729 ; perimeter
G1 X59.684 Y64.863 E0.15696 ; perimeter
G1 X62.323 Y67.077 E0.14192 ; perimeter
G1 X61.978 Y67.487 E0.02205 ; perimeter
G1 X59.340 Y65.273 E0.14192 ; perimeter
G1 X55.928 Y69.338 E0.21861 ; perimeter
G1 X58.567 Y71.552 E0.14192 ; perimeter
G1 X58.262 Y71.916 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.272 Y72.521 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X55.633 Y70.306 E0.14192 ; perimeter
G1 X53.184 Y73.225 E0.15696 ; perimeter
G1 X52.069 Y72.290 E0.05995 ; perimeter
G1 X61.576 Y60.960 E0.60929 ; perimeter
G1 X62.691 Y61.895 E0.05995 ; perimeter
G1 X60.242 Y64.814 E0.15696 ; perimeter
G1 X62.881 Y67.028 E0.14192 ; perimeter
G1 X62.027 Y68.045 E0.05471 ; perimeter
G1 X59.388 Y65.831 E0.14192 ; perimeter
G1 X56.487 Y69.289 E0.18596 ; perimeter
G1 X59.126 Y71.503 E0.14192 ; perimeter
G1 X58.311 Y72.475 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.000 Y72.228 F10800.000 ; move inwards before travel
G1 F8640
G1 X55.753 Y70.403 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X99.812 Y81.038 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.08093 ; perimeter
G1 X97.847 Y78.568 E0.10174 ; perimeter
G1 X99.812 Y78.568 E0.08093 ; perimeter
G1 X99.812 Y80.978 E0.09926 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.208 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.19020 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X66.359 Y61.216 E0.82708 ; perimeter
G1 X65.999 Y60.955 E0.01834 ; perimeter
G1 X65.586 Y60.739 E0.01917 ; perimeter
G1 X65.150 Y60.588 E0.01903 ; perimeter
G1 X64.700 Y60.507 E0.01884 ; perimeter
G1 X64.247 Y60.502 E0.01864 ; perimeter
G1 X63.805 Y60.576 E0.01847 ; perimeter
G1 X63.388 Y60.730 E0.01834 ; perimeter
G1 X63.173 Y60.864 E0.01039 ; perimeter
G1 X62.614 Y60.394 E0.03007 ; perimeter
G1 X62.909 Y60.186 E0.01486 ; perimeter
G1 X63.252 Y60.022 E0.01567 ; perimeter
G1 X63.653 Y59.905 E0.01722 ; perimeter
G1 X64.052 Y59.852 E0.01658 ; perimeter
G1 X64.434 Y59.856 E0.01574 ; perimeter
G1 X64.947 Y59.925 E0.02131 ; perimeter
G1 X65.434 Y60.066 E0.02086 ; perimeter
G1 X65.848 Y60.243 E0.01857 ; perimeter
G1 X66.249 Y60.471 E0.01901 ; perimeter
G1 X66.701 Y60.804 E0.02313 ; perimeter
G1 X81.934 Y73.586 E0.81916 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y78.172 E0.11234 ; perimeter
G1 X100.208 Y78.172 E0.11359 ; perimeter
G1 X100.208 Y81.374 E0.13192 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.605 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.21247 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X66.115 Y61.529 E0.83243 ; perimeter
G1 X65.790 Y61.293 E0.01657 ; perimeter
G1 X65.429 Y61.104 E0.01678 ; perimeter
G1 X65.049 Y60.973 E0.01654 ; perimeter
G1 X64.662 Y60.903 E0.01621 ; perimeter
G1 X64.278 Y60.899 E0.01584 ; perimeter
G1 X63.907 Y60.960 E0.01546 ; perimeter
G1 X63.563 Y61.088 E0.01513 ; perimeter
G1 X63.256 Y61.279 E0.01489 ; perimeter
G1 X63.161 Y61.371 E0.00544 ; perimeter
G1 X62.029 Y60.420 E0.06089 ; perimeter
G1 X62.352 Y60.095 E0.01890 ; perimeter
G1 X62.708 Y59.844 E0.01794 ; perimeter
G1 X63.110 Y59.651 E0.01838 ; perimeter
G1 X63.571 Y59.516 E0.01980 ; perimeter
G1 X64.028 Y59.456 E0.01898 ; perimeter
G1 X64.463 Y59.460 E0.01791 ; perimeter
G1 X65.029 Y59.536 E0.02354 ; perimeter
G1 X65.567 Y59.692 E0.02307 ; perimeter
G1 X66.025 Y59.887 E0.02049 ; perimeter
G1 X66.465 Y60.138 E0.02090 ; perimeter
G1 X66.946 Y60.492 E0.02460 ; perimeter
G1 X82.078 Y73.189 E0.81374 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y77.775 E0.11234 ; perimeter
G1 X100.605 Y77.775 E0.14624 ; perimeter
G1 X100.605 Y81.770 E0.16458 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.221 Y81.718 F10800.000 ; move inwards before travel
G1 F8640
G1 X97.313 Y81.809 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X98.726 Y80.922 ; move to first infill point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7518.59
G1 X99.496 Y80.152 E0.05421 ; infill
G1 X99.496 Y79.475 E0.03370 ; infill
G1 X98.249 Y80.722 E0.08774 ; infill
G1 X98.163 Y80.722 E0.00428 ; infill
G1 X98.163 Y80.130 E0.02942 ; infill
G1 X99.410 Y78.884 E0.08773 ; infill
G1 X98.733 Y78.884 E0.03370 ; infill
G1 X97.962 Y79.654 E0.05420 ; infill
G1 F8640
G1 X98.733 Y78.884 E-0.25149 ; wipe and retract
G1 X99.410 Y78.884 E-0.15635 ; wipe and retract
G1 X98.331 Y79.962 E-0.35215 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X150.188 Y81.038 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.188 Y78.568 E0.10174 ; perimeter
G1 X152.153 Y78.568 E0.08093 ; perimeter
G1 X152.153 Y81.038 E0.10174 ; perimeter
G1 X150.248 Y81.038 E0.07846 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.792 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X149.792 Y78.172 E0.13439 ; perimeter
G1 X152.549 Y78.172 E0.11359 ; perimeter
G1 X152.549 Y80.899 E0.11234 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X183.299 Y60.804 E0.81916 ; perimeter
G1 X183.751 Y60.471 E0.02313 ; perimeter
G1 X184.151 Y60.243 E0.01898 ; perimeter
G1 X184.601 Y60.053 E0.02011 ; perimeter
G1 X185.055 Y59.924 E0.01947 ; perimeter
G1 X185.504 Y59.857 E0.01869 ; perimeter
G1 X185.947 Y59.852 E0.01826 ; perimeter
G1 X186.365 Y59.909 E0.01736 ; perimeter
G1 X186.725 Y60.014 E0.01546 ; perimeter
G1 X187.092 Y60.188 E0.01675 ; perimeter
G1 X187.386 Y60.394 E0.01478 ; perimeter
G1 X186.827 Y60.864 E0.03007 ; perimeter
G1 X186.612 Y60.730 E0.01039 ; perimeter
G1 X186.195 Y60.576 E0.01834 ; perimeter
G1 X185.753 Y60.502 E0.01847 ; perimeter
G1 X185.300 Y60.507 E0.01864 ; perimeter
G1 X184.850 Y60.588 E0.01884 ; perimeter
G1 X184.414 Y60.739 E0.01903 ; perimeter
G1 X184.007 Y60.952 E0.01891 ; perimeter
G1 X183.765 Y61.120 E0.01214 ; perimeter
G1 X168.261 Y74.121 E0.83353 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X149.852 Y81.434 E0.18773 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.395 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.395 Y77.775 E0.16705 ; perimeter
G1 X152.945 Y77.775 E0.14624 ; perimeter
G1 X152.945 Y80.502 E0.11234 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X183.054 Y60.492 E0.81374 ; perimeter
G1 X183.535 Y60.138 E0.02460 ; perimeter
G1 X183.975 Y59.887 E0.02089 ; perimeter
G1 X184.469 Y59.678 E0.02208 ; perimeter
G1 X184.972 Y59.536 E0.02153 ; perimeter
G1 X185.473 Y59.461 E0.02086 ; perimeter
G1 X185.972 Y59.456 E0.02056 ; perimeter
G1 X186.447 Y59.520 E0.01977 ; perimeter
G1 X186.866 Y59.642 E0.01797 ; perimeter
G1 X187.293 Y59.844 E0.01945 ; perimeter
G1 X187.648 Y60.095 E0.01792 ; perimeter
G1 X187.971 Y60.420 E0.01890 ; perimeter
G1 X186.839 Y61.371 E0.06089 ; perimeter
G1 X186.744 Y61.279 E0.00544 ; perimeter
G1 X186.437 Y61.088 E0.01489 ; perimeter
G1 X186.093 Y60.960 E0.01513 ; perimeter
G1 X185.722 Y60.899 E0.01546 ; perimeter
G1 X185.338 Y60.903 E0.01584 ; perimeter
G1 X184.951 Y60.973 E0.01621 ; perimeter
G1 X184.571 Y61.104 E0.01654 ; perimeter
G1 X184.213 Y61.292 E0.01668 ; perimeter
G1 X184.006 Y61.435 E0.01038 ; perimeter
G1 X168.405 Y74.517 E0.83872 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X149.455 Y81.830 E0.21000 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.537 Y81.456 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.407 Y78.539 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X151.066 Y80.922 ; move to first infill point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7518.61
G1 X151.837 Y80.152 E0.05421 ; infill
G1 X151.837 Y79.475 E0.03370 ; infill
G1 X150.590 Y80.722 E0.08774 ; infill
G1 X150.504 Y80.722 E0.00428 ; infill
G1 X150.504 Y80.130 E0.02942 ; infill
G1 X151.751 Y78.884 E0.08773 ; infill
G1 X151.073 Y78.884 E0.03370 ; infill
G1 X150.303 Y79.654 E0.05420 ; infill
G1 F8640
G1 X151.073 Y78.884 E-0.25149 ; wipe and retract
G1 X151.751 Y78.884 E-0.15635 ; wipe and retract
G1 X150.672 Y79.962 E-0.35215 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X191.777 Y71.962 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X191.433 Y71.552 E0.02205 ; perimeter
G1 X194.072 Y69.338 E0.14192 ; perimeter
G1 X190.660 Y65.273 E0.21861 ; perimeter
G1 X188.021 Y67.487 E0.14192 ; perimeter
G1 X187.677 Y67.077 E0.02205 ; perimeter
G1 X190.316 Y64.863 E0.14192 ; perimeter
G1 X187.867 Y61.944 E0.15696 ; perimeter
G1 X188.375 Y61.518 E0.02729 ; perimeter
G1 X197.372 Y72.241 E0.57663 ; perimeter
G1 X196.865 Y72.667 E0.02729 ; perimeter
G1 X194.416 Y69.748 E0.15696 ; perimeter
G1 X191.823 Y71.924 E0.13945 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.728 Y72.521 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X190.874 Y71.503 E0.05471 ; perimeter
G1 X193.513 Y69.289 E0.14192 ; perimeter
G1 X190.612 Y65.831 E0.18596 ; perimeter
G1 X187.973 Y68.045 E0.14192 ; perimeter
G1 X187.119 Y67.028 E0.05471 ; perimeter
G1 X189.758 Y64.814 E0.14192 ; perimeter
G1 X187.309 Y61.895 E0.15696 ; perimeter
G1 X188.424 Y60.960 E0.05995 ; perimeter
G1 X197.931 Y72.290 E0.60929 ; perimeter
G1 X196.816 Y73.225 E0.05995 ; perimeter
G1 X194.367 Y70.306 E0.15696 ; perimeter
G1 X191.774 Y72.482 E0.13945 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.769 Y72.123 F10800.000 ; move inwards before travel
G1 F8640
G1 X190.874 Y71.503 E-0.30695 ; wipe and retract
G1 X192.377 Y70.242 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X146.781 Y100.738 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X146.783 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E1.03508 ; perimeter
G1 X197.991 Y78.317 E1.40260 ; perimeter
G1 X198.310 Y78.008 E0.01834 ; perimeter
G1 X198.595 Y77.639 E0.01918 ; perimeter
G1 X198.819 Y77.235 E0.01903 ; perimeter
G1 X198.977 Y76.806 E0.01884 ; perimeter
G1 X199.061 Y76.361 E0.01864 ; perimeter
G1 X199.065 Y75.913 E0.01847 ; perimeter
G1 X198.985 Y75.475 E0.01834 ; perimeter
G1 X198.822 Y75.070 E0.01797 ; perimeter
G1 X198.656 Y74.811 E0.01270 ; perimeter
G1 X197.825 Y73.814 E0.05344 ; perimeter
G1 X198.334 Y73.387 E0.02738 ; perimeter
G1 X199.224 Y74.447 E0.05700 ; perimeter
G1 X199.445 Y74.763 E0.01589 ; perimeter
G1 X199.612 Y75.125 E0.01640 ; perimeter
G1 X199.706 Y75.465 E0.01456 ; perimeter
G1 X199.751 Y75.862 E0.01646 ; perimeter
G1 X199.733 Y76.292 E0.01773 ; perimeter
G1 X199.652 Y76.718 E0.01785 ; perimeter
G1 X199.509 Y77.149 E0.01871 ; perimeter
G1 X199.302 Y77.574 E0.01949 ; perimeter
G1 X199.053 Y77.961 E0.01894 ; perimeter
G1 X198.717 Y78.366 E0.02169 ; perimeter
G1 X198.338 Y78.725 E0.02150 ; perimeter
G1 X172.104 Y100.738 E1.41080 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X146.841 Y100.738 E0.76243 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.384 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X146.388 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E1.04541 ; perimeter
G1 X197.725 Y78.023 E1.39607 ; perimeter
G1 X198.014 Y77.743 E0.01657 ; perimeter
G1 X198.263 Y77.421 E0.01678 ; perimeter
G1 X198.458 Y77.070 E0.01654 ; perimeter
G1 X198.593 Y76.700 E0.01621 ; perimeter
G1 X198.665 Y76.323 E0.01584 ; perimeter
G1 X198.668 Y75.947 E0.01546 ; perimeter
G1 X198.602 Y75.586 E0.01513 ; perimeter
G1 X198.468 Y75.253 E0.01478 ; perimeter
G1 X198.336 Y75.046 E0.01014 ; perimeter
G1 X197.268 Y73.765 E0.06869 ; perimeter
G1 X198.383 Y72.829 E0.05998 ; perimeter
G1 X199.538 Y74.206 E0.07404 ; perimeter
G1 X199.790 Y74.565 E0.01807 ; perimeter
G1 X199.985 Y74.988 E0.01919 ; perimeter
G1 X200.097 Y75.389 E0.01717 ; perimeter
G1 X200.148 Y75.848 E0.01902 ; perimeter
G1 X200.128 Y76.338 E0.02018 ; perimeter
G1 X200.037 Y76.818 E0.02015 ; perimeter
G1 X199.877 Y77.299 E0.02087 ; perimeter
G1 X199.649 Y77.769 E0.02154 ; perimeter
G1 X199.373 Y78.195 E0.02090 ; perimeter
G1 X199.007 Y78.638 E0.02366 ; perimeter
G1 X198.602 Y79.021 E0.02298 ; perimeter
G1 X172.248 Y101.134 E1.41723 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X146.444 Y101.134 E0.76248 ; perimeter
M73 Q56 S61
M204 S1000 ; adjust acceleration
G1 X146.592 Y100.793 F10800.000 ; move inwards before travel
G1 F8640
G1 X146.388 Y99.806 E-0.30691 ; wipe and retract
G1 X148.350 Y99.806 E-0.45309 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X166.843 Y100.714 ; move to first infill point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.061 Y101.496 E0.05566 ; infill
G1 X166.061 Y101.931 E0.02188 ; infill
G1 X166.312 Y101.931 E0.01260 ; infill
G1 X167.327 Y100.915 E0.07230 ; infill
G1 X168.012 Y100.915 E0.03448 ; infill
G1 X166.996 Y101.931 E0.07230 ; infill
G1 X167.681 Y101.931 E0.03448 ; infill
G1 X168.697 Y100.915 E0.07230 ; infill
G1 X169.382 Y100.915 E0.03448 ; infill
G1 X168.366 Y101.931 E0.07230 ; infill
G1 X169.051 Y101.931 E0.03448 ; infill
G1 X169.744 Y101.238 E0.04931 ; infill
G1 X169.744 Y101.923 E0.03448 ; infill
G1 X169.535 Y102.131 E0.01484 ; infill
G1 F8640
G1 X169.744 Y101.923 E-0.06809 ; wipe and retract
G1 X169.744 Y101.238 E-0.15815 ; wipe and retract
G1 X169.051 Y101.931 E-0.22616 ; wipe and retract
G1 X168.366 Y101.931 E-0.15815 ; wipe and retract
G1 X168.824 Y101.473 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X102.933 Y138.884 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.76490 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X51.377 Y116.871 E1.41080 ; perimeter
G1 X50.996 Y116.512 E0.02155 ; perimeter
G1 X50.677 Y116.129 E0.02053 ; perimeter
G1 X50.412 Y115.720 E0.02007 ; perimeter
G1 X50.206 Y115.295 E0.01947 ; perimeter
G1 X50.062 Y114.865 E0.01869 ; perimeter
G1 X49.981 Y114.428 E0.01828 ; perimeter
G1 X49.963 Y114.026 E0.01658 ; perimeter
G1 X50.009 Y113.611 E0.01722 ; perimeter
G1 X50.111 Y113.245 E0.01567 ; perimeter
G1 X50.268 Y112.911 E0.01517 ; perimeter
G1 X50.491 Y112.593 E0.01600 ; perimeter
G1 X51.381 Y111.533 E0.05700 ; perimeter
G1 X51.888 Y111.959 E0.02729 ; perimeter
G1 X51.123 Y112.871 E0.04901 ; perimeter
G1 X50.895 Y113.210 E0.01685 ; perimeter
G1 X50.730 Y113.621 E0.01826 ; perimeter
G1 X50.650 Y114.059 E0.01834 ; perimeter
G1 X50.654 Y114.507 E0.01847 ; perimeter
G1 X50.738 Y114.952 E0.01864 ; perimeter
G1 X50.896 Y115.382 E0.01884 ; perimeter
G1 X51.120 Y115.785 E0.01903 ; perimeter
G1 X51.404 Y116.154 E0.01917 ; perimeter
G1 X51.724 Y116.464 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.40260 ; perimeter
G1 X102.932 Y138.349 E1.03508 ; perimeter
G1 X102.933 Y138.824 E0.01958 ; perimeter
M73 P56 R59
M204 S1000 ; adjust acceleration
G1 X103.331 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.76496 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03672 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X51.113 Y117.167 E1.41723 ; perimeter
G1 X50.707 Y116.784 E0.02300 ; perimeter
G1 X50.358 Y116.365 E0.02248 ; perimeter
G1 X50.066 Y115.915 E0.02207 ; perimeter
G1 X49.838 Y115.445 E0.02153 ; perimeter
G1 X49.678 Y114.964 E0.02086 ; perimeter
G1 X49.586 Y114.474 E0.02057 ; perimeter
G1 X49.566 Y114.013 E0.01898 ; perimeter
G1 X49.618 Y113.535 E0.01980 ; perimeter
G1 X49.739 Y113.106 E0.01838 ; perimeter
G1 X49.924 Y112.712 E0.01794 ; perimeter
G1 X50.176 Y112.352 E0.01811 ; perimeter
G1 X51.332 Y110.975 E0.07404 ; perimeter
G1 X52.446 Y111.910 E0.05995 ; perimeter
G1 X51.441 Y113.109 E0.06447 ; perimeter
G1 X51.247 Y113.397 E0.01426 ; perimeter
G1 X51.113 Y113.732 E0.01489 ; perimeter
G1 X51.047 Y114.093 E0.01513 ; perimeter
G1 X51.050 Y114.469 E0.01546 ; perimeter
G1 X51.121 Y114.846 E0.01584 ; perimeter
G1 X51.257 Y115.216 E0.01621 ; perimeter
G1 X51.452 Y115.567 E0.01654 ; perimeter
G1 X51.701 Y115.889 E0.01678 ; perimeter
G1 X51.990 Y116.169 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.39607 ; perimeter
G1 X103.327 Y137.952 E1.04541 ; perimeter
G1 X103.331 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.931 Y139.273 F10800.000 ; move inwards before travel
G1 F8640
G1 X100.039 Y139.231 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X83.445 Y140.278 ; move to first infill point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.654 Y140.069 E0.01484 ; infill
G1 X83.654 Y139.384 E0.03448 ; infill
G1 X82.961 Y140.077 E0.04931 ; infill
G1 X82.276 Y140.077 E0.03448 ; infill
G1 X83.292 Y139.061 E0.07230 ; infill
G1 X82.607 Y139.061 E0.03448 ; infill
G1 X81.591 Y140.077 E0.07230 ; infill
G1 X80.906 Y140.077 E0.03448 ; infill
G1 X81.922 Y139.061 E0.07230 ; infill
G1 X81.237 Y139.061 E0.03448 ; infill
G1 X80.221 Y140.077 E0.07230 ; infill
G1 X79.971 Y140.077 E0.01260 ; infill
G1 X79.971 Y139.642 E0.02188 ; infill
G1 X80.753 Y138.860 E0.05566 ; infill
G1 F8640
G1 X79.971 Y139.642 E-0.25530 ; wipe and retract
G1 X79.971 Y140.077 E-0.10036 ; wipe and retract
G1 X80.221 Y140.077 E-0.05779 ; wipe and retract
G1 X81.237 Y139.061 E-0.33164 ; wipe and retract
G1 X81.301 Y139.061 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X57.938 Y110.108 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X55.299 Y107.894 E0.14192 ; perimeter
G1 X52.850 Y110.813 E0.15696 ; perimeter
G1 X52.343 Y110.387 E0.02729 ; perimeter
G1 X61.340 Y99.664 E0.57663 ; perimeter
G1 X61.847 Y100.090 E0.02729 ; perimeter
G1 X59.398 Y103.009 E0.15696 ; perimeter
G1 X62.037 Y105.223 E0.14192 ; perimeter
G1 X61.693 Y105.633 E0.02205 ; perimeter
G1 X59.054 Y103.419 E0.14192 ; perimeter
G1 X55.643 Y107.484 E0.21861 ; perimeter
G1 X58.282 Y109.698 E0.14192 ; perimeter
G1 X57.977 Y110.063 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.987 Y110.667 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X55.348 Y108.452 E0.14192 ; perimeter
G1 X52.899 Y111.371 E0.15696 ; perimeter
G1 X51.784 Y110.436 E0.05995 ; perimeter
G1 X61.291 Y99.106 E0.60929 ; perimeter
G1 X62.406 Y100.041 E0.05995 ; perimeter
G1 X59.957 Y102.960 E0.15696 ; perimeter
G1 X62.596 Y105.174 E0.14192 ; perimeter
G1 X61.742 Y106.192 E0.05471 ; perimeter
G1 X59.103 Y103.977 E0.14192 ; perimeter
G1 X56.202 Y107.435 E0.18596 ; perimeter
G1 X58.841 Y109.650 E0.14192 ; perimeter
G1 X58.026 Y110.621 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.714 Y110.374 F10800.000 ; move inwards before travel
G1 F8640
G1 X55.468 Y108.549 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X99.527 Y119.184 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.08093 ; perimeter
G1 X97.562 Y116.714 E0.10174 ; perimeter
G1 X99.527 Y116.714 E0.08093 ; perimeter
G1 X99.527 Y119.124 E0.09926 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.923 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.19020 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X66.074 Y99.362 E0.82708 ; perimeter
G1 X65.714 Y99.101 E0.01834 ; perimeter
G1 X65.301 Y98.885 E0.01917 ; perimeter
G1 X64.865 Y98.734 E0.01903 ; perimeter
G1 X64.414 Y98.653 E0.01884 ; perimeter
G1 X63.962 Y98.648 E0.01864 ; perimeter
G1 X63.520 Y98.722 E0.01847 ; perimeter
G1 X63.102 Y98.877 E0.01834 ; perimeter
G1 X62.888 Y99.010 E0.01039 ; perimeter
G1 X62.329 Y98.541 E0.03007 ; perimeter
G1 X62.624 Y98.333 E0.01486 ; perimeter
G1 X62.967 Y98.168 E0.01567 ; perimeter
G1 X63.368 Y98.051 E0.01722 ; perimeter
G1 X63.767 Y97.998 E0.01658 ; perimeter
G1 X64.149 Y98.003 E0.01574 ; perimeter
G1 X64.662 Y98.071 E0.02131 ; perimeter
G1 X65.148 Y98.212 E0.02086 ; perimeter
G1 X65.563 Y98.389 E0.01857 ; perimeter
G1 X65.964 Y98.618 E0.01901 ; perimeter
G1 X66.416 Y98.950 E0.02313 ; perimeter
G1 X81.649 Y111.732 E0.81916 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y116.318 E0.11234 ; perimeter
G1 X99.923 Y116.318 E0.11359 ; perimeter
G1 X99.923 Y119.520 E0.13192 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.319 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.21247 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X65.830 Y99.675 E0.83243 ; perimeter
G1 X65.504 Y99.439 E0.01657 ; perimeter
G1 X65.144 Y99.250 E0.01678 ; perimeter
G1 X64.764 Y99.119 E0.01654 ; perimeter
G1 X64.377 Y99.049 E0.01621 ; perimeter
G1 X63.992 Y99.045 E0.01584 ; perimeter
G1 X63.622 Y99.107 E0.01546 ; perimeter
G1 X63.278 Y99.234 E0.01513 ; perimeter
G1 X62.971 Y99.425 E0.01489 ; perimeter
G1 X62.876 Y99.517 E0.00544 ; perimeter
G1 X61.744 Y98.567 E0.06089 ; perimeter
G1 X62.067 Y98.241 E0.01890 ; perimeter
G1 X62.422 Y97.990 E0.01794 ; perimeter
G1 X62.825 Y97.797 E0.01838 ; perimeter
G1 X63.286 Y97.662 E0.01980 ; perimeter
G1 X63.743 Y97.602 E0.01898 ; perimeter
G1 X64.178 Y97.606 E0.01791 ; perimeter
G1 X64.744 Y97.682 E0.02354 ; perimeter
G1 X65.282 Y97.838 E0.02307 ; perimeter
G1 X65.739 Y98.033 E0.02049 ; perimeter
G1 X66.180 Y98.285 E0.02090 ; perimeter
G1 X66.661 Y98.638 E0.02460 ; perimeter
G1 X81.793 Y111.335 E0.81374 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y115.921 E0.11234 ; perimeter
G1 X100.319 Y115.921 E0.14624 ; perimeter
G1 X100.319 Y119.916 E0.16458 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.935 Y119.864 F10800.000 ; move inwards before travel
G1 F8640
G1 X97.028 Y119.955 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X98.440 Y119.069 ; move to first infill point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7518.59
G1 X99.211 Y118.298 E0.05421 ; infill
G1 X99.211 Y117.621 E0.03370 ; infill
G1 X97.964 Y118.868 E0.08774 ; infill
G1 X97.878 Y118.868 E0.00428 ; infill
G1 X97.878 Y118.277 E0.02942 ; infill
G1 X99.125 Y117.030 E0.08773 ; infill
G1 X98.447 Y117.030 E0.03370 ; infill
G1 X97.677 Y117.800 E0.05420 ; infill
G1 F8640
G1 X98.447 Y117.030 E-0.25149 ; wipe and retract
G1 X99.125 Y117.030 E-0.15635 ; wipe and retract
G1 X98.046 Y118.109 E-0.35215 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X149.903 Y119.184 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.903 Y116.714 E0.10174 ; perimeter
G1 X151.868 Y116.714 E0.08093 ; perimeter
G1 X151.868 Y119.184 E0.10174 ; perimeter
G1 X149.963 Y119.184 E0.07846 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.507 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X149.507 Y116.318 E0.13439 ; perimeter
G1 X152.264 Y116.318 E0.11359 ; perimeter
G1 X152.264 Y119.045 E0.11234 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X183.014 Y98.950 E0.81916 ; perimeter
G1 X183.466 Y98.618 E0.02313 ; perimeter
G1 X183.866 Y98.389 E0.01898 ; perimeter
G1 X184.316 Y98.199 E0.02011 ; perimeter
G1 X184.770 Y98.070 E0.01947 ; perimeter
G1 X185.219 Y98.003 E0.01869 ; perimeter
G1 X185.662 Y97.998 E0.01826 ; perimeter
G1 X186.080 Y98.055 E0.01736 ; perimeter
G1 X186.440 Y98.160 E0.01546 ; perimeter
G1 X186.807 Y98.334 E0.01675 ; perimeter
G1 X187.100 Y98.541 E0.01478 ; perimeter
G1 X186.541 Y99.010 E0.03007 ; perimeter
G1 X186.327 Y98.877 E0.01039 ; perimeter
G1 X185.910 Y98.722 E0.01834 ; perimeter
G1 X185.468 Y98.648 E0.01847 ; perimeter
G1 X185.015 Y98.653 E0.01864 ; perimeter
G1 X184.565 Y98.734 E0.01884 ; perimeter
G1 X184.129 Y98.885 E0.01903 ; perimeter
G1 X183.722 Y99.098 E0.01891 ; perimeter
G1 X183.480 Y99.266 E0.01214 ; perimeter
G1 X167.976 Y112.267 E0.83353 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X149.567 Y119.580 E0.18773 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.110 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.110 Y115.921 E0.16705 ; perimeter
G1 X152.660 Y115.921 E0.14624 ; perimeter
G1 X152.660 Y118.648 E0.11234 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X182.768 Y98.638 E0.81374 ; perimeter
G1 X183.250 Y98.285 E0.02460 ; perimeter
G1 X183.690 Y98.033 E0.02089 ; perimeter
G1 X184.184 Y97.825 E0.02208 ; perimeter
G1 X184.687 Y97.682 E0.02153 ; perimeter
G1 X185.187 Y97.607 E0.02086 ; perimeter
G1 X185.686 Y97.602 E0.02056 ; perimeter
G1 X186.162 Y97.666 E0.01977 ; perimeter
G1 X186.581 Y97.788 E0.01797 ; perimeter
G1 X187.008 Y97.990 E0.01945 ; perimeter
G1 X187.363 Y98.241 E0.01792 ; perimeter
G1 X187.686 Y98.567 E0.01890 ; perimeter
G1 X186.554 Y99.517 E0.06089 ; perimeter
G1 X186.459 Y99.425 E0.00544 ; perimeter
G1 X186.152 Y99.234 E0.01489 ; perimeter
G1 X185.808 Y99.107 E0.01513 ; perimeter
G1 X185.437 Y99.045 E0.01546 ; perimeter
G1 X185.053 Y99.049 E0.01584 ; perimeter
G1 X184.665 Y99.119 E0.01621 ; perimeter
G1 X184.286 Y99.250 E0.01654 ; perimeter
G1 X183.927 Y99.438 E0.01668 ; perimeter
G1 X183.720 Y99.581 E0.01038 ; perimeter
G1 X168.120 Y112.663 E0.83872 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X149.170 Y119.976 E0.21000 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.252 Y119.602 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.122 Y116.685 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X150.781 Y119.069 ; move to first infill point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7518.61
G1 X151.552 Y118.298 E0.05421 ; infill
G1 X151.552 Y117.621 E0.03370 ; infill
G1 X150.305 Y118.868 E0.08774 ; infill
G1 X150.219 Y118.868 E0.00428 ; infill
G1 X150.219 Y118.277 E0.02942 ; infill
G1 X151.465 Y117.030 E0.08773 ; infill
G1 X150.788 Y117.030 E0.03370 ; infill
G1 X150.018 Y117.800 E0.05420 ; infill
G1 F8640
G1 X150.788 Y117.030 E-0.25149 ; wipe and retract
G1 X151.465 Y117.030 E-0.15635 ; wipe and retract
G1 X150.387 Y118.109 E-0.35215 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X191.491 Y110.108 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X191.147 Y109.698 E0.02205 ; perimeter
G1 X193.786 Y107.484 E0.14192 ; perimeter
G1 X190.375 Y103.419 E0.21861 ; perimeter
G1 X187.736 Y105.633 E0.14192 ; perimeter
G1 X187.392 Y105.223 E0.02205 ; perimeter
G1 X190.031 Y103.009 E0.14192 ; perimeter
G1 X187.582 Y100.090 E0.15696 ; perimeter
G1 X188.090 Y99.664 E0.02729 ; perimeter
G1 X197.087 Y110.387 E0.57663 ; perimeter
G1 X196.579 Y110.813 E0.02729 ; perimeter
G1 X194.130 Y107.894 E0.15696 ; perimeter
G1 X191.537 Y110.070 E0.13945 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.443 Y110.667 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X190.589 Y109.650 E0.05471 ; perimeter
G1 X193.228 Y107.435 E0.14192 ; perimeter
G1 X190.326 Y103.977 E0.18596 ; perimeter
G1 X187.687 Y106.192 E0.14192 ; perimeter
G1 X186.834 Y105.174 E0.05471 ; perimeter
G1 X189.473 Y102.960 E0.14192 ; perimeter
G1 X187.024 Y100.041 E0.15696 ; perimeter
G1 X188.139 Y99.106 E0.05995 ; perimeter
G1 X197.645 Y110.436 E0.60929 ; perimeter
G1 X196.531 Y111.371 E0.05995 ; perimeter
G1 X194.082 Y108.452 E0.15696 ; perimeter
G1 X191.489 Y110.628 E0.13945 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.484 Y110.269 F10800.000 ; move inwards before travel
G1 F8640
G1 X190.589 Y109.650 E-0.30695 ; wipe and retract
G1 X192.092 Y108.388 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X146.496 Y138.884 ; move to first perimeter point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X146.498 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E1.03508 ; perimeter
G1 X197.706 Y116.464 E1.40260 ; perimeter
G1 X198.025 Y116.154 E0.01834 ; perimeter
G1 X198.309 Y115.785 E0.01918 ; perimeter
G1 X198.534 Y115.382 E0.01903 ; perimeter
G1 X198.692 Y114.952 E0.01884 ; perimeter
G1 X198.775 Y114.508 E0.01864 ; perimeter
G1 X198.780 Y114.059 E0.01847 ; perimeter
G1 X198.700 Y113.621 E0.01834 ; perimeter
G1 X198.537 Y113.217 E0.01797 ; perimeter
G1 X198.371 Y112.957 E0.01270 ; perimeter
G1 X197.540 Y111.961 E0.05344 ; perimeter
G1 X198.049 Y111.533 E0.02738 ; perimeter
G1 X198.939 Y112.593 E0.05700 ; perimeter
G1 X199.160 Y112.909 E0.01589 ; perimeter
G1 X199.327 Y113.271 E0.01640 ; perimeter
G1 X199.421 Y113.611 E0.01456 ; perimeter
G1 X199.466 Y114.008 E0.01646 ; perimeter
G1 X199.448 Y114.438 E0.01773 ; perimeter
G1 X199.367 Y114.864 E0.01785 ; perimeter
G1 X199.223 Y115.295 E0.01871 ; perimeter
G1 X199.017 Y115.721 E0.01949 ; perimeter
G1 X198.768 Y116.107 E0.01894 ; perimeter
G1 X198.432 Y116.513 E0.02169 ; perimeter
G1 X198.053 Y116.871 E0.02150 ; perimeter
G1 X171.819 Y138.884 E1.41080 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X146.556 Y138.884 E0.76243 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.099 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X146.103 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E1.04541 ; perimeter
G1 X197.440 Y116.169 E1.39607 ; perimeter
G1 X197.729 Y115.889 E0.01657 ; perimeter
G1 X197.977 Y115.567 E0.01678 ; perimeter
G1 X198.173 Y115.216 E0.01654 ; perimeter
G1 X198.308 Y114.846 E0.01621 ; perimeter
G1 X198.379 Y114.469 E0.01584 ; perimeter
G1 X198.383 Y114.093 E0.01546 ; perimeter
G1 X198.317 Y113.732 E0.01513 ; perimeter
G1 X198.183 Y113.399 E0.01478 ; perimeter
G1 X198.050 Y113.192 E0.01014 ; perimeter
G1 X196.983 Y111.911 E0.06869 ; perimeter
G1 X198.098 Y110.975 E0.05998 ; perimeter
G1 X199.253 Y112.352 E0.07404 ; perimeter
G1 X199.505 Y112.711 E0.01807 ; perimeter
G1 X199.700 Y113.134 E0.01919 ; perimeter
G1 X199.811 Y113.536 E0.01717 ; perimeter
G1 X199.863 Y113.994 E0.01902 ; perimeter
G1 X199.843 Y114.484 E0.02018 ; perimeter
G1 X199.752 Y114.964 E0.02015 ; perimeter
G1 X199.591 Y115.445 E0.02087 ; perimeter
G1 X199.363 Y115.915 E0.02154 ; perimeter
G1 X199.088 Y116.341 E0.02090 ; perimeter
G1 X198.722 Y116.784 E0.02366 ; perimeter
G1 X198.317 Y117.167 E0.02298 ; perimeter
G1 X171.963 Y139.280 E1.41723 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X146.159 Y139.280 E0.76248 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.307 Y138.939 F10800.000 ; move inwards before travel
G1 F8640
G1 X146.103 Y137.952 E-0.30691 ; wipe and retract
G1 X148.065 Y137.952 E-0.45309 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
G1 X166.558 Y138.860 ; move to first infill point
G1 Z12.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.776 Y139.642 E0.05566 ; infill
G1 X165.776 Y140.077 E0.02188 ; infill
G1 X166.026 Y140.077 E0.01260 ; infill
G1 X167.042 Y139.061 E0.07230 ; infill
G1 X167.727 Y139.061 E0.03448 ; infill
G1 X166.711 Y140.077 E0.07230 ; infill
G1 X167.396 Y140.077 E0.03448 ; infill
G1 X168.412 Y139.061 E0.07230 ; infill
G1 X169.097 Y139.061 E0.03448 ; infill
G1 X168.081 Y140.077 E0.07230 ; infill
G1 X168.766 Y140.077 E0.03448 ; infill
G1 X169.459 Y139.384 E0.04931 ; infill
G1 X169.459 Y140.069 E0.03448 ; infill
G1 X169.250 Y140.278 E0.01484 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;12.25


G1 F8640
G1 X169.459 Y140.069 E-0.06809 ; wipe and retract
G1 X169.459 Y139.384 E-0.15815 ; wipe and retract
G1 X168.766 Y140.077 E-0.22616 ; wipe and retract
G1 X168.081 Y140.077 E-0.15815 ; wipe and retract
G1 X168.539 Y139.619 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;12.25
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X102.832 Y100.738 ; move to first perimeter point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.74900 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X51.528 Y78.612 E1.41802 ; perimeter
G1 X51.148 Y78.254 E0.02152 ; perimeter
G1 X50.829 Y77.872 E0.02050 ; perimeter
G1 X50.564 Y77.463 E0.02004 ; perimeter
G1 X50.358 Y77.039 E0.01943 ; perimeter
G1 X50.215 Y76.611 E0.01858 ; perimeter
G1 X50.131 Y76.163 E0.01880 ; perimeter
G1 X50.115 Y75.777 E0.01592 ; perimeter
G1 X50.161 Y75.348 E0.01775 ; perimeter
G1 X50.263 Y74.984 E0.01558 ; perimeter
G1 X50.420 Y74.652 E0.01513 ; perimeter
G1 X50.642 Y74.335 E0.01596 ; perimeter
G1 X51.532 Y73.275 E0.05701 ; perimeter
G1 X52.039 Y73.701 E0.02729 ; perimeter
G1 X51.274 Y74.612 E0.04901 ; perimeter
G1 X51.046 Y74.951 E0.01685 ; perimeter
G1 X50.881 Y75.363 E0.01826 ; perimeter
G1 X50.801 Y75.801 E0.01834 ; perimeter
G1 X50.805 Y76.249 E0.01847 ; perimeter
G1 X50.889 Y76.694 E0.01864 ; perimeter
G1 X51.047 Y77.123 E0.01884 ; perimeter
G1 X51.271 Y77.527 E0.01903 ; perimeter
G1 X51.555 Y77.895 E0.01917 ; perimeter
G1 X51.875 Y78.205 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.40981 ; perimeter
G1 X102.833 Y100.203 E1.01926 ; perimeter
G1 X102.833 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X103.229 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.74899 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03672 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X51.264 Y78.908 E1.42444 ; perimeter
G1 X50.859 Y78.526 E0.02296 ; perimeter
G1 X50.510 Y78.107 E0.02244 ; perimeter
G1 X50.219 Y77.659 E0.02204 ; perimeter
G1 X49.991 Y77.189 E0.02150 ; perimeter
G1 X49.831 Y76.711 E0.02075 ; perimeter
G1 X49.736 Y76.208 E0.02110 ; perimeter
G1 X49.717 Y75.764 E0.01832 ; perimeter
G1 X49.770 Y75.273 E0.02034 ; perimeter
G1 X49.890 Y74.845 E0.01831 ; perimeter
G1 X50.076 Y74.452 E0.01789 ; perimeter
G1 X50.328 Y74.093 E0.01806 ; perimeter
G1 X51.483 Y72.716 E0.07404 ; perimeter
G1 X52.598 Y73.652 E0.05995 ; perimeter
G1 X51.592 Y74.851 E0.06447 ; perimeter
G1 X51.399 Y75.138 E0.01426 ; perimeter
G1 X51.264 Y75.473 E0.01489 ; perimeter
G1 X51.198 Y75.835 E0.01513 ; perimeter
G1 X51.201 Y76.210 E0.01546 ; perimeter
G1 X51.272 Y76.588 E0.01584 ; perimeter
G1 X51.408 Y76.957 E0.01621 ; perimeter
G1 X51.603 Y77.308 E0.01654 ; perimeter
G1 X51.852 Y77.631 E0.01678 ; perimeter
G1 X52.141 Y77.910 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.40329 ; perimeter
G1 X103.229 Y99.806 E1.02965 ; perimeter
G1 X103.229 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.829 Y101.127 F10800.000 ; move inwards before travel
G1 F8640
G1 X99.937 Y101.085 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X84.140 Y101.697 ; move to first infill point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.358 Y100.915 E0.05567 ; infill
G1 X82.673 Y100.915 E0.03448 ; infill
G1 X83.688 Y101.931 E0.07230 ; infill
G1 X83.003 Y101.931 E0.03448 ; infill
G1 X81.988 Y100.915 E0.07230 ; infill
G1 X81.303 Y100.915 E0.03448 ; infill
G1 X82.318 Y101.931 E0.07230 ; infill
G1 X81.634 Y101.931 E0.03448 ; infill
G1 X80.618 Y100.915 E0.07230 ; infill
G1 X80.256 Y100.915 E0.01821 ; infill
G1 X80.256 Y101.238 E0.01627 ; infill
G1 X80.949 Y101.931 E0.04930 ; infill
G1 X80.264 Y101.931 E0.03448 ; infill
G1 X80.055 Y101.722 E0.01483 ; infill
G1 F8640
G1 X80.264 Y101.931 E-0.06804 ; wipe and retract
G1 X80.949 Y101.931 E-0.15815 ; wipe and retract
G1 X80.256 Y101.238 E-0.22612 ; wipe and retract
G1 X80.256 Y100.915 E-0.07462 ; wipe and retract
G1 X80.618 Y100.915 E-0.08353 ; wipe and retract
G1 X81.076 Y101.373 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X58.084 Y71.846 ; move to first perimeter point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X55.450 Y69.635 E0.14165 ; perimeter
G1 X53.001 Y72.554 E0.15696 ; perimeter
G1 X52.494 Y72.128 E0.02729 ; perimeter
G1 X61.491 Y61.406 E0.57663 ; perimeter
G1 X61.999 Y61.832 E0.02729 ; perimeter
G1 X59.550 Y64.750 E0.15696 ; perimeter
G1 X62.183 Y66.960 E0.14165 ; perimeter
G1 X61.839 Y67.370 E0.02205 ; perimeter
G1 X59.205 Y65.160 E0.14165 ; perimeter
G1 X55.794 Y69.225 E0.21861 ; perimeter
G1 X58.428 Y71.436 E0.14165 ; perimeter
G1 X58.123 Y71.800 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X58.133 Y72.404 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X55.499 Y70.194 E0.14165 ; perimeter
G1 X53.050 Y73.112 E0.15696 ; perimeter
G1 X51.935 Y72.177 E0.05995 ; perimeter
G1 X61.442 Y60.847 E0.60929 ; perimeter
G1 X62.557 Y61.783 E0.05995 ; perimeter
G1 X60.108 Y64.701 E0.15696 ; perimeter
G1 X62.742 Y66.911 E0.14165 ; perimeter
G1 X61.888 Y67.929 E0.05471 ; perimeter
G1 X59.254 Y65.719 E0.14165 ; perimeter
G1 X56.353 Y69.177 E0.18596 ; perimeter
G1 X58.987 Y71.387 E0.14165 ; perimeter
G1 X58.172 Y72.358 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.860 Y72.111 F10800.000 ; move inwards before travel
G1 F8640
G1 X55.614 Y70.287 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X99.562 Y81.038 ; move to first perimeter point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.07063 ; perimeter
G1 X97.847 Y78.393 E0.10895 ; perimeter
G1 X99.562 Y78.393 E0.07063 ; perimeter
G1 X99.562 Y80.978 E0.10648 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.958 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.17990 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X66.225 Y61.103 E0.83429 ; perimeter
G1 X65.865 Y60.842 E0.01834 ; perimeter
G1 X65.452 Y60.626 E0.01917 ; perimeter
G1 X65.016 Y60.475 E0.01903 ; perimeter
G1 X64.566 Y60.395 E0.01884 ; perimeter
G1 X64.113 Y60.389 E0.01864 ; perimeter
G1 X63.671 Y60.463 E0.01847 ; perimeter
G1 X63.253 Y60.618 E0.01834 ; perimeter
G1 X63.039 Y60.751 E0.01039 ; perimeter
G1 X62.480 Y60.282 E0.03006 ; perimeter
G1 X62.773 Y60.075 E0.01477 ; perimeter
G1 X63.114 Y59.911 E0.01558 ; perimeter
G1 X63.528 Y59.791 E0.01775 ; perimeter
G1 X63.912 Y59.740 E0.01595 ; perimeter
G1 X64.354 Y59.744 E0.01824 ; perimeter
G1 X64.813 Y59.812 E0.01910 ; perimeter
G1 X65.284 Y59.948 E0.02017 ; perimeter
G1 X65.716 Y60.131 E0.01933 ; perimeter
G1 X66.123 Y60.364 E0.01935 ; perimeter
G1 X66.567 Y60.691 E0.02270 ; perimeter
G1 X81.934 Y73.586 E0.82639 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
M73 Q56 S60
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y77.997 E0.11955 ; perimeter
G1 X99.958 Y77.997 E0.10329 ; perimeter
G1 X99.958 Y81.374 E0.13913 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.355 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.20217 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X65.981 Y61.416 E0.83965 ; perimeter
G1 X65.655 Y61.180 E0.01657 ; perimeter
G1 X65.295 Y60.991 E0.01678 ; perimeter
G1 X64.915 Y60.860 E0.01654 ; perimeter
G1 X64.528 Y60.791 E0.01621 ; perimeter
G1 X64.143 Y60.786 E0.01584 ; perimeter
G1 X63.773 Y60.848 E0.01546 ; perimeter
G1 X63.429 Y60.976 E0.01513 ; perimeter
G1 X63.122 Y61.166 E0.01489 ; perimeter
G1 X63.027 Y61.258 E0.00544 ; perimeter
G1 X61.895 Y60.308 E0.06089 ; perimeter
G1 X62.217 Y59.983 E0.01885 ; perimeter
G1 X62.572 Y59.732 E0.01789 ; perimeter
G1 X62.972 Y59.539 E0.01831 ; perimeter
G1 X63.446 Y59.402 E0.02034 ; perimeter
G1 X63.887 Y59.344 E0.01832 ; perimeter
G1 X64.385 Y59.348 E0.02052 ; perimeter
G1 X64.897 Y59.424 E0.02132 ; perimeter
G1 X65.417 Y59.573 E0.02226 ; perimeter
G1 X65.892 Y59.775 E0.02129 ; perimeter
G1 X66.340 Y60.032 E0.02126 ; perimeter
G1 X66.812 Y60.380 E0.02416 ; perimeter
G1 X82.078 Y73.189 E0.82096 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y77.600 E0.11955 ; perimeter
G1 X100.355 Y77.600 E0.13595 ; perimeter
G1 X100.355 Y81.770 E0.17179 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.973 Y81.711 F10800.000 ; move inwards before travel
G1 F8640
G1 X97.063 Y81.811 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X98.915 Y80.922 ; move to first infill point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7659.9
G1 X98.163 Y80.171 E0.05191 ; infill
G1 X98.163 Y79.506 E0.03247 ; infill
G1 X99.246 Y80.589 E0.07479 ; infill
G1 X99.246 Y79.924 E0.03247 ; infill
G1 X98.163 Y78.842 E0.07479 ; infill
G1 X98.163 Y78.709 E0.00648 ; infill
G1 X98.695 Y78.709 E0.02598 ; infill
G1 X99.447 Y79.461 E0.05192 ; infill
G1 F8640
G1 X98.695 Y78.709 E-0.24542 ; wipe and retract
G1 X98.163 Y78.709 E-0.12282 ; wipe and retract
G1 X98.163 Y78.842 E-0.03065 ; wipe and retract
G1 X99.246 Y79.924 E-0.35352 ; wipe and retract
G1 X99.246 Y79.957 E-0.00759 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.670 Y86.602 E0.15696 ; perimeter
G1 X76.014 Y86.192 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15696 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.691 Y78.235 E0.15696 ; perimeter
G1 X83.035 Y77.825 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15696 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.112 Y86.651 E0.15696 ; perimeter
G1 X75.965 Y85.633 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15696 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.132 Y78.284 E0.15696 ; perimeter
G1 X82.986 Y77.267 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15696 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M73 P56 R58
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.965 Y77.825 E0.15696 ; perimeter
G1 X167.309 Y78.235 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15696 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.986 Y86.192 E0.15696 ; perimeter
G1 X174.330 Y86.602 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15696 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X167.014 Y77.267 E0.15696 ; perimeter
G1 X167.868 Y78.284 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15696 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X174.035 Y85.633 E0.15696 ; perimeter
G1 X174.888 Y86.651 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15696 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X150.438 Y81.038 ; move to first perimeter point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.438 Y78.393 E0.10895 ; perimeter
G1 X152.153 Y78.393 E0.07063 ; perimeter
G1 X152.153 Y81.038 E0.10895 ; perimeter
G1 X150.498 Y81.038 E0.06816 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.042 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.042 Y77.997 E0.14160 ; perimeter
G1 X152.549 Y77.997 E0.10329 ; perimeter
G1 X152.549 Y80.899 E0.11955 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X183.433 Y60.691 E0.82639 ; perimeter
G1 X183.877 Y60.364 E0.02270 ; perimeter
G1 X184.284 Y60.131 E0.01934 ; perimeter
G1 X184.733 Y59.941 E0.02007 ; perimeter
G1 X185.186 Y59.812 E0.01943 ; perimeter
G1 X185.632 Y59.745 E0.01857 ; perimeter
G1 X186.088 Y59.740 E0.01876 ; perimeter
G1 X186.504 Y59.797 E0.01729 ; perimeter
G1 X186.850 Y59.898 E0.01486 ; perimeter
G1 X187.229 Y60.077 E0.01727 ; perimeter
G1 X187.520 Y60.282 E0.01466 ; perimeter
G1 X186.961 Y60.751 E0.03006 ; perimeter
G1 X186.747 Y60.618 E0.01039 ; perimeter
G1 X186.329 Y60.463 E0.01834 ; perimeter
G1 X185.887 Y60.389 E0.01847 ; perimeter
G1 X185.434 Y60.395 E0.01864 ; perimeter
G1 X184.984 Y60.475 E0.01884 ; perimeter
G1 X184.548 Y60.626 E0.01903 ; perimeter
G1 X184.141 Y60.839 E0.01892 ; perimeter
G1 X183.895 Y61.010 E0.01233 ; perimeter
G1 X168.261 Y74.121 E0.84054 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X150.102 Y81.434 E0.17743 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.645 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.645 Y77.600 E0.17426 ; perimeter
G1 X152.945 Y77.600 E0.13595 ; perimeter
G1 X152.945 Y80.502 E0.11955 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X183.188 Y60.380 E0.82096 ; perimeter
G1 X183.660 Y60.032 E0.02416 ; perimeter
G1 X184.108 Y59.776 E0.02125 ; perimeter
G1 X184.601 Y59.567 E0.02205 ; perimeter
G1 X185.102 Y59.424 E0.02150 ; perimeter
G1 X185.601 Y59.349 E0.02075 ; perimeter
G1 X186.112 Y59.344 E0.02108 ; perimeter
G1 X186.586 Y59.408 E0.01971 ; perimeter
G1 X186.990 Y59.527 E0.01734 ; perimeter
G1 X187.429 Y59.733 E0.01998 ; perimeter
G1 X187.783 Y59.983 E0.01785 ; perimeter
G1 X188.105 Y60.308 E0.01885 ; perimeter
G1 X186.973 Y61.258 E0.06089 ; perimeter
G1 X186.878 Y61.166 E0.00544 ; perimeter
G1 X186.571 Y60.976 E0.01489 ; perimeter
G1 X186.227 Y60.848 E0.01513 ; perimeter
G1 X185.857 Y60.786 E0.01546 ; perimeter
G1 X185.472 Y60.791 E0.01584 ; perimeter
G1 X185.085 Y60.860 E0.01621 ; perimeter
G1 X184.705 Y60.991 E0.01654 ; perimeter
G1 X184.347 Y61.179 E0.01668 ; perimeter
G1 X184.136 Y61.325 E0.01057 ; perimeter
G1 X168.405 Y74.517 E0.84574 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X149.705 Y81.830 E0.19970 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.786 Y81.456 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.659 Y78.539 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X151.506 Y80.922 ; move to first infill point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7659.9
G1 X150.754 Y80.171 E0.05191 ; infill
G1 X150.754 Y79.506 E0.03247 ; infill
G1 X151.837 Y80.589 E0.07479 ; infill
G1 X151.837 Y79.924 E0.03247 ; infill
G1 X150.754 Y78.842 E0.07479 ; infill
G1 X150.754 Y78.709 E0.00648 ; infill
G1 X151.286 Y78.709 E0.02598 ; infill
G1 X152.038 Y79.461 E0.05192 ; infill
G1 F8640
G1 X151.286 Y78.709 E-0.24542 ; wipe and retract
G1 X150.754 Y78.709 E-0.12282 ; wipe and retract
G1 X150.754 Y78.842 E-0.03065 ; wipe and retract
G1 X151.837 Y79.924 E-0.35352 ; wipe and retract
G1 X151.837 Y79.957 E-0.00759 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X191.916 Y71.846 ; move to first perimeter point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X191.572 Y71.436 E0.02205 ; perimeter
G1 X194.206 Y69.225 E0.14165 ; perimeter
G1 X190.795 Y65.160 E0.21861 ; perimeter
G1 X188.161 Y67.370 E0.14165 ; perimeter
G1 X187.817 Y66.960 E0.02205 ; perimeter
G1 X190.450 Y64.750 E0.14165 ; perimeter
G1 X188.001 Y61.832 E0.15696 ; perimeter
G1 X188.509 Y61.406 E0.02729 ; perimeter
G1 X197.506 Y72.128 E0.57663 ; perimeter
G1 X196.999 Y72.554 E0.02729 ; perimeter
G1 X194.550 Y69.635 E0.15696 ; perimeter
G1 X191.962 Y71.807 E0.13917 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.867 Y72.404 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X191.013 Y71.387 E0.05471 ; perimeter
G1 X193.647 Y69.177 E0.14165 ; perimeter
G1 X190.746 Y65.719 E0.18596 ; perimeter
G1 X188.112 Y67.929 E0.14165 ; perimeter
G1 X187.258 Y66.911 E0.05471 ; perimeter
G1 X189.892 Y64.701 E0.14165 ; perimeter
G1 X187.443 Y61.783 E0.15696 ; perimeter
G1 X188.558 Y60.847 E0.05995 ; perimeter
G1 X198.065 Y72.177 E0.60929 ; perimeter
G1 X196.950 Y73.112 E0.05995 ; perimeter
G1 X194.501 Y70.194 E0.15696 ; perimeter
G1 X191.913 Y72.365 E0.13917 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.909 Y72.006 F10800.000 ; move inwards before travel
G1 F8640
G1 X191.013 Y71.387 E-0.30695 ; wipe and retract
G1 X192.516 Y70.125 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X147.168 Y100.738 ; move to first perimeter point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X147.167 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E1.01926 ; perimeter
G1 X198.125 Y78.205 E1.40981 ; perimeter
G1 X198.445 Y77.895 E0.01834 ; perimeter
G1 X198.729 Y77.527 E0.01918 ; perimeter
G1 X198.953 Y77.123 E0.01903 ; perimeter
G1 X199.111 Y76.694 E0.01884 ; perimeter
G1 X199.195 Y76.249 E0.01864 ; perimeter
G1 X199.199 Y75.801 E0.01847 ; perimeter
G1 X199.119 Y75.363 E0.01834 ; perimeter
G1 X198.956 Y74.958 E0.01798 ; perimeter
G1 X198.788 Y74.695 E0.01284 ; perimeter
G1 X197.959 Y73.702 E0.05329 ; perimeter
G1 X198.468 Y73.275 E0.02737 ; perimeter
G1 X199.358 Y74.335 E0.05701 ; perimeter
G1 X199.578 Y74.649 E0.01581 ; perimeter
G1 X199.749 Y75.022 E0.01691 ; perimeter
G1 X199.840 Y75.349 E0.01398 ; perimeter
G1 X199.885 Y75.745 E0.01639 ; perimeter
G1 X199.866 Y76.187 E0.01825 ; perimeter
G1 X199.785 Y76.611 E0.01776 ; perimeter
G1 X199.642 Y77.039 E0.01862 ; perimeter
G1 X199.435 Y77.464 E0.01945 ; perimeter
G1 X199.181 Y77.857 E0.01930 ; perimeter
G1 X198.851 Y78.254 E0.02126 ; perimeter
G1 X198.472 Y78.612 E0.02148 ; perimeter
G1 X172.104 Y100.738 E1.41802 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X147.228 Y100.738 E0.74652 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.771 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X146.771 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E1.02965 ; perimeter
G1 X197.859 Y77.910 E1.40329 ; perimeter
G1 X198.148 Y77.631 E0.01657 ; perimeter
G1 X198.397 Y77.308 E0.01678 ; perimeter
G1 X198.592 Y76.957 E0.01654 ; perimeter
G1 X198.728 Y76.588 E0.01621 ; perimeter
G1 X198.799 Y76.210 E0.01584 ; perimeter
G1 X198.802 Y75.835 E0.01546 ; perimeter
G1 X198.736 Y75.473 E0.01513 ; perimeter
G1 X198.602 Y75.140 E0.01479 ; perimeter
G1 X198.468 Y74.930 E0.01028 ; perimeter
G1 X197.402 Y73.652 E0.06855 ; perimeter
G1 X198.517 Y72.716 E0.05998 ; perimeter
G1 X199.672 Y74.093 E0.07404 ; perimeter
G1 X199.924 Y74.451 E0.01801 ; perimeter
G1 X200.122 Y74.886 E0.01970 ; perimeter
G1 X200.230 Y75.273 E0.01656 ; perimeter
G1 X200.282 Y75.730 E0.01896 ; perimeter
G1 X200.261 Y76.233 E0.02072 ; perimeter
G1 X200.169 Y76.711 E0.02005 ; perimeter
G1 X200.009 Y77.189 E0.02077 ; perimeter
G1 X199.781 Y77.659 E0.02150 ; perimeter
G1 X199.501 Y78.092 E0.02127 ; perimeter
G1 X199.141 Y78.526 E0.02322 ; perimeter
G1 X198.736 Y78.908 E0.02295 ; perimeter
G1 X172.248 Y101.134 E1.42444 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X146.831 Y101.134 E0.74652 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.979 Y100.793 F10800.000 ; move inwards before travel
G1 F8640
G1 X146.771 Y99.806 E-0.30696 ; wipe and retract
G1 X148.733 Y99.806 E-0.45304 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X165.860 Y101.722 ; move to first infill point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.069 Y101.931 E0.01484 ; infill
G1 X166.754 Y101.931 E0.03448 ; infill
G1 X166.061 Y101.238 E0.04930 ; infill
G1 X166.061 Y100.915 E0.01627 ; infill
G1 X166.423 Y100.915 E0.01821 ; infill
G1 X167.439 Y101.931 E0.07230 ; infill
G1 X168.124 Y101.931 E0.03448 ; infill
G1 X167.108 Y100.915 E0.07230 ; infill
G1 X167.793 Y100.915 E0.03448 ; infill
G1 X168.808 Y101.931 E0.07230 ; infill
G1 X169.493 Y101.931 E0.03448 ; infill
G1 X168.478 Y100.915 E0.07230 ; infill
G1 X169.163 Y100.915 E0.03448 ; infill
G1 X169.945 Y101.697 E0.05567 ; infill
G1 F8640
G1 X169.163 Y100.915 E-0.25535 ; wipe and retract
G1 X168.478 Y100.915 E-0.15815 ; wipe and retract
G1 X169.493 Y101.931 E-0.33164 ; wipe and retract
G1 X169.429 Y101.931 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X102.547 Y138.884 ; move to first perimeter point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.74900 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X51.243 Y116.758 E1.41802 ; perimeter
G1 X50.863 Y116.400 E0.02152 ; perimeter
G1 X50.544 Y116.018 E0.02050 ; perimeter
G1 X50.279 Y115.610 E0.02004 ; perimeter
G1 X50.073 Y115.185 E0.01943 ; perimeter
G1 X49.930 Y114.758 E0.01858 ; perimeter
G1 X49.846 Y114.309 E0.01880 ; perimeter
G1 X49.829 Y113.923 E0.01592 ; perimeter
G1 X49.876 Y113.494 E0.01775 ; perimeter
G1 X49.978 Y113.130 E0.01558 ; perimeter
G1 X50.135 Y112.798 E0.01513 ; perimeter
G1 X50.357 Y112.481 E0.01596 ; perimeter
G1 X51.246 Y111.421 E0.05701 ; perimeter
G1 X51.754 Y111.847 E0.02729 ; perimeter
G1 X50.989 Y112.758 E0.04901 ; perimeter
G1 X50.761 Y113.098 E0.01685 ; perimeter
G1 X50.596 Y113.509 E0.01826 ; perimeter
G1 X50.516 Y113.947 E0.01834 ; perimeter
G1 X50.520 Y114.395 E0.01847 ; perimeter
G1 X50.604 Y114.840 E0.01864 ; perimeter
G1 X50.762 Y115.269 E0.01884 ; perimeter
G1 X50.986 Y115.673 E0.01903 ; perimeter
G1 X51.270 Y116.041 E0.01917 ; perimeter
G1 X51.590 Y116.351 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.40981 ; perimeter
G1 X102.547 Y138.349 E1.01926 ; perimeter
G1 X102.547 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.944 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.74899 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03672 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X50.979 Y117.055 E1.42444 ; perimeter
G1 X50.574 Y116.672 E0.02296 ; perimeter
G1 X50.224 Y116.254 E0.02244 ; perimeter
G1 X49.933 Y115.805 E0.02204 ; perimeter
G1 X49.705 Y115.335 E0.02150 ; perimeter
G1 X49.546 Y114.858 E0.02075 ; perimeter
G1 X49.451 Y114.354 E0.02110 ; perimeter
G1 X49.432 Y113.910 E0.01832 ; perimeter
G1 X49.485 Y113.419 E0.02034 ; perimeter
G1 X49.605 Y112.991 E0.01831 ; perimeter
G1 X49.791 Y112.598 E0.01789 ; perimeter
G1 X50.042 Y112.239 E0.01806 ; perimeter
G1 X51.198 Y110.862 E0.07404 ; perimeter
G1 X52.312 Y111.798 E0.05995 ; perimeter
G1 X51.306 Y112.997 E0.06447 ; perimeter
G1 X51.113 Y113.284 E0.01426 ; perimeter
G1 X50.979 Y113.619 E0.01489 ; perimeter
G1 X50.913 Y113.981 E0.01513 ; perimeter
G1 X50.916 Y114.356 E0.01546 ; perimeter
G1 X50.987 Y114.734 E0.01584 ; perimeter
G1 X51.123 Y115.103 E0.01621 ; perimeter
G1 X51.318 Y115.454 E0.01654 ; perimeter
G1 X51.567 Y115.777 E0.01678 ; perimeter
G1 X51.856 Y116.057 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.40329 ; perimeter
G1 X102.944 Y137.952 E1.02965 ; perimeter
G1 X102.944 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.544 Y139.273 F10800.000 ; move inwards before travel
G1 F8640
G1 X99.652 Y139.231 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X83.854 Y139.843 ; move to first infill point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.072 Y139.061 E0.05567 ; infill
G1 X82.388 Y139.061 E0.03448 ; infill
G1 X83.403 Y140.077 E0.07230 ; infill
G1 X82.718 Y140.077 E0.03448 ; infill
G1 X81.703 Y139.061 E0.07230 ; infill
G1 X81.018 Y139.061 E0.03448 ; infill
G1 X82.033 Y140.077 E0.07230 ; infill
G1 X81.348 Y140.077 E0.03448 ; infill
G1 X80.333 Y139.061 E0.07230 ; infill
G1 X79.971 Y139.061 E0.01821 ; infill
G1 X79.971 Y139.384 E0.01627 ; infill
G1 X80.663 Y140.077 E0.04930 ; infill
G1 X79.978 Y140.077 E0.03448 ; infill
G1 X79.770 Y139.868 E0.01483 ; infill
G1 F8640
G1 X79.978 Y140.077 E-0.06804 ; wipe and retract
G1 X80.663 Y140.077 E-0.15815 ; wipe and retract
G1 X79.971 Y139.384 E-0.22612 ; wipe and retract
G1 X79.971 Y139.061 E-0.07462 ; wipe and retract
G1 X80.333 Y139.061 E-0.08353 ; wipe and retract
G1 X80.791 Y139.519 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X57.799 Y109.992 ; move to first perimeter point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X55.165 Y107.782 E0.14165 ; perimeter
G1 X52.716 Y110.700 E0.15696 ; perimeter
G1 X52.209 Y110.274 E0.02729 ; perimeter
G1 X61.206 Y99.552 E0.57663 ; perimeter
G1 X61.713 Y99.978 E0.02729 ; perimeter
G1 X59.264 Y102.896 E0.15696 ; perimeter
G1 X61.898 Y105.106 E0.14165 ; perimeter
G1 X61.554 Y105.516 E0.02205 ; perimeter
G1 X58.920 Y103.306 E0.14165 ; perimeter
G1 X55.509 Y107.372 E0.21861 ; perimeter
G1 X58.143 Y109.582 E0.14165 ; perimeter
G1 X57.838 Y109.946 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.848 Y110.550 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X55.214 Y108.340 E0.14165 ; perimeter
G1 X52.765 Y111.259 E0.15696 ; perimeter
G1 X51.650 Y110.323 E0.05995 ; perimeter
G1 X61.157 Y98.993 E0.60929 ; perimeter
G1 X62.272 Y99.929 E0.05995 ; perimeter
G1 X59.823 Y102.847 E0.15696 ; perimeter
G1 X62.457 Y105.058 E0.14165 ; perimeter
G1 X61.603 Y106.075 E0.05471 ; perimeter
G1 X58.969 Y103.865 E0.14165 ; perimeter
G1 X56.068 Y107.323 E0.18596 ; perimeter
G1 X58.701 Y109.533 E0.14165 ; perimeter
G1 X57.886 Y110.504 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.575 Y110.257 F10800.000 ; move inwards before travel
G1 F8640
G1 X55.329 Y108.433 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X99.277 Y119.184 ; move to first perimeter point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.07063 ; perimeter
G1 X97.562 Y116.539 E0.10895 ; perimeter
G1 X99.277 Y116.539 E0.07063 ; perimeter
G1 X99.277 Y119.124 E0.10648 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.673 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.17990 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X65.940 Y99.249 E0.83429 ; perimeter
G1 X65.579 Y98.988 E0.01834 ; perimeter
G1 X65.167 Y98.773 E0.01917 ; perimeter
G1 X64.731 Y98.621 E0.01903 ; perimeter
G1 X64.280 Y98.541 E0.01884 ; perimeter
G1 X63.828 Y98.535 E0.01864 ; perimeter
G1 X63.386 Y98.609 E0.01847 ; perimeter
G1 X62.968 Y98.764 E0.01834 ; perimeter
G1 X62.754 Y98.897 E0.01039 ; perimeter
G1 X62.195 Y98.428 E0.03006 ; perimeter
G1 X62.488 Y98.221 E0.01477 ; perimeter
G1 X62.829 Y98.057 E0.01558 ; perimeter
G1 X63.243 Y97.937 E0.01775 ; perimeter
G1 X63.627 Y97.886 E0.01595 ; perimeter
G1 X64.069 Y97.890 E0.01824 ; perimeter
G1 X64.528 Y97.958 E0.01910 ; perimeter
G1 X64.998 Y98.094 E0.02017 ; perimeter
G1 X65.430 Y98.277 E0.01933 ; perimeter
G1 X65.838 Y98.510 E0.01935 ; perimeter
G1 X66.282 Y98.837 E0.02270 ; perimeter
G1 X81.649 Y111.732 E0.82639 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y116.143 E0.11955 ; perimeter
G1 X99.673 Y116.143 E0.10329 ; perimeter
G1 X99.673 Y119.520 E0.13913 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.069 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.20217 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X65.696 Y99.562 E0.83965 ; perimeter
G1 X65.370 Y99.326 E0.01657 ; perimeter
G1 X65.009 Y99.137 E0.01678 ; perimeter
G1 X64.630 Y99.006 E0.01654 ; perimeter
G1 X64.243 Y98.937 E0.01621 ; perimeter
G1 X63.858 Y98.932 E0.01584 ; perimeter
G1 X63.488 Y98.994 E0.01546 ; perimeter
G1 X63.144 Y99.122 E0.01513 ; perimeter
G1 X62.837 Y99.313 E0.01489 ; perimeter
G1 X62.742 Y99.404 E0.00544 ; perimeter
G1 X61.609 Y98.454 E0.06089 ; perimeter
G1 X61.932 Y98.129 E0.01885 ; perimeter
G1 X62.286 Y97.878 E0.01789 ; perimeter
G1 X62.687 Y97.686 E0.01831 ; perimeter
G1 X63.161 Y97.548 E0.02034 ; perimeter
G1 X63.602 Y97.490 E0.01832 ; perimeter
G1 X64.100 Y97.494 E0.02052 ; perimeter
G1 X64.612 Y97.570 E0.02132 ; perimeter
G1 X65.131 Y97.719 E0.02226 ; perimeter
G1 X65.607 Y97.922 E0.02129 ; perimeter
G1 X66.055 Y98.178 E0.02126 ; perimeter
G1 X66.527 Y98.526 E0.02416 ; perimeter
G1 X81.793 Y111.335 E0.82096 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y115.746 E0.11955 ; perimeter
G1 X100.069 Y115.746 E0.13595 ; perimeter
G1 X100.069 Y119.916 E0.17179 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.688 Y119.857 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.778 Y119.957 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X98.630 Y119.069 ; move to first infill point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7659.9
G1 X97.878 Y118.317 E0.05191 ; infill
G1 X97.878 Y117.652 E0.03247 ; infill
G1 X98.961 Y118.735 E0.07479 ; infill
G1 X98.961 Y118.070 E0.03247 ; infill
G1 X97.878 Y116.988 E0.07479 ; infill
G1 X97.878 Y116.855 E0.00648 ; infill
G1 X98.410 Y116.855 E0.02598 ; infill
G1 X99.162 Y117.607 E0.05192 ; infill
G1 F8640
G1 X98.410 Y116.855 E-0.24542 ; wipe and retract
G1 X97.878 Y116.855 E-0.12282 ; wipe and retract
G1 X97.878 Y116.988 E-0.03065 ; wipe and retract
G1 X98.961 Y118.070 E-0.35352 ; wipe and retract
G1 X98.961 Y118.103 E-0.00759 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.385 Y124.748 E0.15696 ; perimeter
G1 X75.729 Y124.338 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15696 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.405 Y116.381 E0.15696 ; perimeter
G1 X82.749 Y115.971 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15696 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.826 Y124.797 E0.15696 ; perimeter
G1 X75.680 Y123.779 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15696 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.847 Y116.430 E0.15696 ; perimeter
G1 X82.701 Y115.413 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15696 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.680 Y115.971 E0.15696 ; perimeter
G1 X167.024 Y116.381 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15696 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.701 Y124.338 E0.15696 ; perimeter
G1 X174.045 Y124.748 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15696 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.729 Y115.413 E0.15696 ; perimeter
G1 X167.583 Y116.430 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15696 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.750 Y123.779 E0.15696 ; perimeter
G1 X174.603 Y124.797 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15696 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X150.153 Y119.184 ; move to first perimeter point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.153 Y116.539 E0.10895 ; perimeter
G1 X151.868 Y116.539 E0.07063 ; perimeter
G1 X151.868 Y119.184 E0.10895 ; perimeter
G1 X150.213 Y119.184 E0.06816 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.757 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X149.757 Y116.143 E0.14160 ; perimeter
G1 X152.264 Y116.143 E0.10329 ; perimeter
G1 X152.264 Y119.045 E0.11955 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X183.148 Y98.837 E0.82639 ; perimeter
G1 X183.591 Y98.510 E0.02270 ; perimeter
G1 X183.999 Y98.277 E0.01934 ; perimeter
G1 X184.448 Y98.087 E0.02007 ; perimeter
G1 X184.901 Y97.958 E0.01943 ; perimeter
G1 X185.347 Y97.891 E0.01857 ; perimeter
G1 X185.802 Y97.886 E0.01876 ; perimeter
G1 X186.218 Y97.943 E0.01729 ; perimeter
G1 X186.564 Y98.044 E0.01486 ; perimeter
G1 X186.944 Y98.223 E0.01727 ; perimeter
G1 X187.235 Y98.428 E0.01466 ; perimeter
G1 X186.675 Y98.897 E0.03006 ; perimeter
G1 X186.461 Y98.764 E0.01039 ; perimeter
G1 X186.044 Y98.609 E0.01834 ; perimeter
G1 X185.602 Y98.535 E0.01847 ; perimeter
G1 X185.149 Y98.541 E0.01864 ; perimeter
G1 X184.699 Y98.621 E0.01884 ; perimeter
G1 X184.263 Y98.773 E0.01903 ; perimeter
G1 X183.856 Y98.986 E0.01892 ; perimeter
G1 X183.610 Y99.156 E0.01233 ; perimeter
G1 X167.976 Y112.267 E0.84054 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X149.817 Y119.580 E0.17743 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.360 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.360 Y115.746 E0.17426 ; perimeter
G1 X152.660 Y115.746 E0.13595 ; perimeter
G1 X152.660 Y118.648 E0.11955 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X182.903 Y98.526 E0.82096 ; perimeter
G1 X183.375 Y98.178 E0.02416 ; perimeter
G1 X183.823 Y97.922 E0.02125 ; perimeter
G1 X184.315 Y97.713 E0.02205 ; perimeter
G1 X184.817 Y97.570 E0.02150 ; perimeter
G1 X185.316 Y97.495 E0.02075 ; perimeter
G1 X185.827 Y97.490 E0.02108 ; perimeter
G1 X186.301 Y97.555 E0.01971 ; perimeter
G1 X186.705 Y97.673 E0.01734 ; perimeter
G1 X187.144 Y97.879 E0.01998 ; perimeter
G1 X187.498 Y98.129 E0.01785 ; perimeter
G1 X187.820 Y98.454 E0.01885 ; perimeter
G1 X186.688 Y99.404 E0.06089 ; perimeter
G1 X186.593 Y99.313 E0.00544 ; perimeter
G1 X186.286 Y99.122 E0.01489 ; perimeter
G1 X185.942 Y98.994 E0.01513 ; perimeter
G1 X185.571 Y98.932 E0.01546 ; perimeter
G1 X185.187 Y98.937 E0.01584 ; perimeter
G1 X184.800 Y99.006 E0.01621 ; perimeter
G1 X184.420 Y99.137 E0.01654 ; perimeter
G1 X184.061 Y99.325 E0.01668 ; perimeter
M73 Q57 S59
G1 X183.851 Y99.472 E0.01057 ; perimeter
G1 X168.120 Y112.663 E0.84574 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X149.420 Y119.976 E0.19970 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.501 Y119.602 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.374 Y116.685 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X151.220 Y119.069 ; move to first infill point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7659.9
G1 X150.469 Y118.317 E0.05191 ; infill
G1 X150.469 Y117.652 E0.03247 ; infill
G1 X151.552 Y118.735 E0.07479 ; infill
G1 X151.552 Y118.070 E0.03247 ; infill
G1 X150.469 Y116.988 E0.07479 ; infill
G1 X150.469 Y116.855 E0.00648 ; infill
G1 X151.001 Y116.855 E0.02598 ; infill
G1 X151.752 Y117.607 E0.05192 ; infill
G1 F8640
G1 X151.001 Y116.855 E-0.24542 ; wipe and retract
G1 X150.469 Y116.855 E-0.12282 ; wipe and retract
G1 X150.469 Y116.988 E-0.03065 ; wipe and retract
G1 X151.552 Y118.070 E-0.35352 ; wipe and retract
G1 X151.552 Y118.103 E-0.00759 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X191.631 Y109.992 ; move to first perimeter point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X191.287 Y109.582 E0.02205 ; perimeter
G1 X193.920 Y107.372 E0.14165 ; perimeter
G1 X190.509 Y103.306 E0.21861 ; perimeter
G1 X187.875 Y105.516 E0.14165 ; perimeter
G1 X187.531 Y105.106 E0.02205 ; perimeter
G1 X190.165 Y102.896 E0.14165 ; perimeter
G1 X187.716 Y99.978 E0.15696 ; perimeter
G1 X188.224 Y99.552 E0.02729 ; perimeter
G1 X197.221 Y110.274 E0.57663 ; perimeter
G1 X196.714 Y110.700 E0.02729 ; perimeter
G1 X194.265 Y107.782 E0.15696 ; perimeter
G1 X191.677 Y109.953 E0.13917 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.582 Y110.550 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X190.728 Y109.533 E0.05471 ; perimeter
G1 X193.362 Y107.323 E0.14165 ; perimeter
G1 X190.461 Y103.865 E0.18596 ; perimeter
G1 X187.827 Y106.075 E0.14165 ; perimeter
G1 X186.973 Y105.058 E0.05471 ; perimeter
G1 X189.607 Y102.847 E0.14165 ; perimeter
G1 X187.158 Y99.929 E0.15696 ; perimeter
G1 X188.273 Y98.993 E0.05995 ; perimeter
G1 X197.780 Y110.323 E0.60929 ; perimeter
G1 X196.665 Y111.259 E0.05995 ; perimeter
G1 X194.216 Y108.340 E0.15696 ; perimeter
G1 X191.628 Y110.512 E0.13917 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.623 Y110.152 F10800.000 ; move inwards before travel
G1 F8640
G1 X190.728 Y109.533 E-0.30695 ; wipe and retract
G1 X192.231 Y108.272 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X146.882 Y138.884 ; move to first perimeter point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X146.882 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E1.01926 ; perimeter
G1 X197.840 Y116.351 E1.40981 ; perimeter
G1 X198.159 Y116.041 E0.01834 ; perimeter
G1 X198.443 Y115.673 E0.01918 ; perimeter
G1 X198.668 Y115.269 E0.01903 ; perimeter
G1 X198.826 Y114.840 E0.01884 ; perimeter
G1 X198.910 Y114.395 E0.01864 ; perimeter
G1 X198.914 Y113.947 E0.01847 ; perimeter
G1 X198.834 Y113.509 E0.01834 ; perimeter
G1 X198.671 Y113.104 E0.01798 ; perimeter
G1 X198.503 Y112.841 E0.01284 ; perimeter
G1 X197.674 Y111.848 E0.05329 ; perimeter
G1 X198.183 Y111.421 E0.02737 ; perimeter
G1 X199.073 Y112.481 E0.05701 ; perimeter
G1 X199.293 Y112.795 E0.01581 ; perimeter
G1 X199.464 Y113.168 E0.01691 ; perimeter
G1 X199.554 Y113.495 E0.01398 ; perimeter
G1 X199.600 Y113.891 E0.01639 ; perimeter
G1 X199.581 Y114.333 E0.01825 ; perimeter
G1 X199.500 Y114.757 E0.01776 ; perimeter
G1 X199.356 Y115.185 E0.01862 ; perimeter
G1 X199.150 Y115.610 E0.01945 ; perimeter
G1 X198.896 Y116.003 E0.01930 ; perimeter
G1 X198.566 Y116.400 E0.02126 ; perimeter
G1 X198.187 Y116.758 E0.02148 ; perimeter
G1 X171.819 Y138.884 E1.41802 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
M73 P57 R57
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X146.942 Y138.884 E0.74652 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.486 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X146.486 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E1.02965 ; perimeter
G1 X197.574 Y116.057 E1.40329 ; perimeter
G1 X197.863 Y115.777 E0.01657 ; perimeter
G1 X198.112 Y115.454 E0.01678 ; perimeter
G1 X198.307 Y115.103 E0.01654 ; perimeter
G1 X198.442 Y114.734 E0.01621 ; perimeter
G1 X198.514 Y114.356 E0.01584 ; perimeter
G1 X198.517 Y113.981 E0.01546 ; perimeter
G1 X198.451 Y113.619 E0.01513 ; perimeter
G1 X198.317 Y113.286 E0.01479 ; perimeter
G1 X198.182 Y113.076 E0.01028 ; perimeter
G1 X197.117 Y111.798 E0.06855 ; perimeter
G1 X198.232 Y110.862 E0.05998 ; perimeter
G1 X199.387 Y112.239 E0.07404 ; perimeter
G1 X199.638 Y112.597 E0.01801 ; perimeter
G1 X199.837 Y113.032 E0.01970 ; perimeter
G1 X199.945 Y113.419 E0.01656 ; perimeter
G1 X199.997 Y113.877 E0.01896 ; perimeter
G1 X199.975 Y114.379 E0.02072 ; perimeter
G1 X199.884 Y114.857 E0.02005 ; perimeter
G1 X199.724 Y115.335 E0.02077 ; perimeter
G1 X199.496 Y115.805 E0.02150 ; perimeter
G1 X199.216 Y116.238 E0.02127 ; perimeter
G1 X198.856 Y116.672 E0.02322 ; perimeter
G1 X198.451 Y117.055 E0.02295 ; perimeter
G1 X171.963 Y139.280 E1.42444 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X146.546 Y139.280 E0.74652 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.694 Y138.939 F10800.000 ; move inwards before travel
G1 F8640
G1 X146.486 Y137.952 E-0.30696 ; wipe and retract
G1 X148.448 Y137.952 E-0.45304 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
G1 X165.575 Y139.868 ; move to first infill point
G1 Z12.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.784 Y140.077 E0.01484 ; infill
G1 X166.469 Y140.077 E0.03448 ; infill
G1 X165.776 Y139.384 E0.04930 ; infill
G1 X165.776 Y139.061 E0.01627 ; infill
G1 X166.138 Y139.061 E0.01821 ; infill
G1 X167.153 Y140.077 E0.07230 ; infill
G1 X167.838 Y140.077 E0.03448 ; infill
G1 X166.823 Y139.061 E0.07230 ; infill
G1 X167.508 Y139.061 E0.03448 ; infill
G1 X168.523 Y140.077 E0.07230 ; infill
G1 X169.208 Y140.077 E0.03448 ; infill
G1 X168.193 Y139.061 E0.07230 ; infill
G1 X168.878 Y139.061 E0.03448 ; infill
G1 X169.660 Y139.843 E0.05567 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;12.5


G1 F8640
G1 X168.878 Y139.061 E-0.25535 ; wipe and retract
G1 X168.193 Y139.061 E-0.15815 ; wipe and retract
G1 X169.208 Y140.077 E-0.33164 ; wipe and retract
G1 X169.144 Y140.077 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z12.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;12.5
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X102.467 Y100.738 ; move to first perimeter point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.73392 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X51.394 Y78.500 E1.42523 ; perimeter
G1 X51.014 Y78.142 E0.02148 ; perimeter
G1 X50.696 Y77.760 E0.02046 ; perimeter
G1 X50.431 Y77.353 E0.02001 ; perimeter
G1 X50.226 Y76.931 E0.01932 ; perimeter
G1 X50.083 Y76.505 E0.01851 ; perimeter
G1 X49.996 Y76.043 E0.01937 ; perimeter
G1 X49.981 Y75.673 E0.01527 ; perimeter
G1 X50.028 Y75.232 E0.01828 ; perimeter
G1 X50.130 Y74.870 E0.01550 ; perimeter
G1 X50.286 Y74.538 E0.01509 ; perimeter
G1 X50.508 Y74.222 E0.01591 ; perimeter
G1 X51.398 Y73.162 E0.05701 ; perimeter
G1 X51.905 Y73.588 E0.02729 ; perimeter
G1 X51.140 Y74.499 E0.04901 ; perimeter
G1 X50.912 Y74.839 E0.01685 ; perimeter
G1 X50.747 Y75.250 E0.01826 ; perimeter
G1 X50.667 Y75.688 E0.01834 ; perimeter
G1 X50.671 Y76.136 E0.01847 ; perimeter
G1 X50.755 Y76.581 E0.01864 ; perimeter
G1 X50.913 Y77.010 E0.01884 ; perimeter
G1 X51.137 Y77.414 E0.01903 ; perimeter
G1 X51.421 Y77.783 E0.01917 ; perimeter
G1 X51.741 Y78.092 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.41702 ; perimeter
G1 X102.468 Y100.203 E1.00423 ; perimeter
G1 X102.467 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.862 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.73388 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03671 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X51.130 Y78.796 E1.43165 ; perimeter
G1 X50.725 Y78.414 E0.02293 ; perimeter
G1 X50.377 Y77.996 E0.02241 ; perimeter
G1 X50.086 Y77.548 E0.02200 ; perimeter
G1 X49.859 Y77.082 E0.02137 ; perimeter
G1 X49.699 Y76.606 E0.02070 ; perimeter
G1 X49.602 Y76.089 E0.02167 ; perimeter
G1 X49.583 Y75.661 E0.01765 ; perimeter
G1 X49.637 Y75.157 E0.02088 ; perimeter
G1 X49.757 Y74.730 E0.01825 ; perimeter
G1 X49.942 Y74.339 E0.01785 ; perimeter
G1 X50.193 Y73.981 E0.01801 ; perimeter
G1 X51.349 Y72.604 E0.07404 ; perimeter
G1 X52.463 Y73.539 E0.05995 ; perimeter
G1 X51.458 Y74.738 E0.06447 ; perimeter
G1 X51.264 Y75.025 E0.01426 ; perimeter
G1 X51.130 Y75.361 E0.01489 ; perimeter
G1 X51.064 Y75.722 E0.01513 ; perimeter
G1 X51.067 Y76.097 E0.01546 ; perimeter
G1 X51.138 Y76.475 E0.01584 ; perimeter
G1 X51.274 Y76.845 E0.01621 ; perimeter
G1 X51.469 Y77.195 E0.01654 ; perimeter
G1 X51.718 Y77.518 E0.01678 ; perimeter
G1 X52.007 Y77.798 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.41050 ; perimeter
G1 X102.865 Y99.806 E1.01465 ; perimeter
G1 X102.862 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.462 Y101.127 F10800.000 ; move inwards before travel
G1 F8640
G1 X99.571 Y101.085 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X83.730 Y102.131 ; move to first infill point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.939 Y101.923 E0.01484 ; infill
G1 X83.939 Y101.238 E0.03448 ; infill
G1 X83.246 Y101.931 E0.04931 ; infill
G1 X82.561 Y101.931 E0.03448 ; infill
G1 X83.577 Y100.915 E0.07230 ; infill
G1 X82.892 Y100.915 E0.03448 ; infill
G1 X81.876 Y101.931 E0.07230 ; infill
G1 X81.191 Y101.931 E0.03448 ; infill
G1 X82.207 Y100.915 E0.07230 ; infill
G1 X81.522 Y100.915 E0.03448 ; infill
G1 X80.506 Y101.931 E0.07230 ; infill
G1 X80.256 Y101.931 E0.01260 ; infill
G1 X80.256 Y101.496 E0.02188 ; infill
G1 X81.038 Y100.714 E0.05566 ; infill
G1 F8640
G1 X80.256 Y101.496 E-0.25530 ; wipe and retract
G1 X80.256 Y101.931 E-0.10036 ; wipe and retract
G1 X80.506 Y101.931 E-0.05779 ; wipe and retract
G1 X81.522 Y100.915 E-0.33164 ; wipe and retract
G1 X81.587 Y100.915 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X57.945 Y71.729 ; move to first perimeter point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X55.316 Y69.523 E0.14137 ; perimeter
G1 X52.867 Y72.442 E0.15696 ; perimeter
G1 X52.360 Y72.016 E0.02729 ; perimeter
G1 X61.357 Y61.293 E0.57663 ; perimeter
G1 X61.864 Y61.719 E0.02729 ; perimeter
G1 X59.415 Y64.638 E0.15696 ; perimeter
G1 X62.044 Y66.844 E0.14137 ; perimeter
G1 X61.700 Y67.254 E0.02205 ; perimeter
G1 X59.071 Y65.048 E0.14137 ; perimeter
G1 X55.660 Y69.113 E0.21861 ; perimeter
G1 X58.289 Y71.319 E0.14137 ; perimeter
G1 X57.984 Y71.683 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.994 Y72.287 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X55.365 Y70.081 E0.14137 ; perimeter
G1 X52.916 Y73.000 E0.15696 ; perimeter
G1 X51.801 Y72.065 E0.05995 ; perimeter
G1 X61.308 Y60.735 E0.60929 ; perimeter
G1 X62.423 Y61.670 E0.05995 ; perimeter
G1 X59.974 Y64.589 E0.15696 ; perimeter
G1 X62.603 Y66.795 E0.14137 ; perimeter
G1 X61.749 Y67.812 E0.05471 ; perimeter
G1 X59.120 Y65.606 E0.14137 ; perimeter
G1 X56.219 Y69.064 E0.18596 ; perimeter
G1 X58.848 Y71.270 E0.14137 ; perimeter
G1 X58.032 Y72.241 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.721 Y71.994 F10800.000 ; move inwards before travel
G1 F8640
G1 X55.474 Y70.170 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X99.312 Y81.038 ; move to first perimeter point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.06034 ; perimeter
G1 X97.847 Y78.218 E0.11616 ; perimeter
G1 X99.312 Y78.218 E0.06034 ; perimeter
G1 X99.312 Y80.978 E0.11369 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.708 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.16960 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X66.091 Y60.991 E0.84150 ; perimeter
G1 X65.731 Y60.730 E0.01834 ; perimeter
G1 X65.318 Y60.514 E0.01917 ; perimeter
G1 X64.882 Y60.363 E0.01903 ; perimeter
G1 X64.431 Y60.282 E0.01884 ; perimeter
G1 X63.979 Y60.277 E0.01864 ; perimeter
G1 X63.537 Y60.351 E0.01847 ; perimeter
G1 X63.119 Y60.505 E0.01834 ; perimeter
G1 X62.905 Y60.639 E0.01039 ; perimeter
G1 X62.346 Y60.169 E0.03006 ; perimeter
G1 X62.637 Y59.964 E0.01469 ; perimeter
G1 X62.976 Y59.800 E0.01550 ; perimeter
G1 X63.403 Y59.677 E0.01828 ; perimeter
G1 X63.771 Y59.628 E0.01531 ; perimeter
G1 X64.212 Y59.631 E0.01817 ; perimeter
G1 X64.686 Y59.701 E0.01971 ; perimeter
G1 X65.136 Y59.829 E0.01927 ; perimeter
G1 X65.583 Y60.019 E0.02002 ; perimeter
G1 X65.998 Y60.257 E0.01969 ; perimeter
G1 X66.432 Y60.578 E0.02227 ; perimeter
G1 X81.934 Y73.586 E0.83362 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y77.822 E0.12676 ; perimeter
G1 X99.708 Y77.822 E0.09299 ; perimeter
G1 X99.708 Y81.374 E0.14634 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.105 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.19187 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X65.847 Y61.303 E0.84686 ; perimeter
G1 X65.521 Y61.068 E0.01657 ; perimeter
G1 X65.161 Y60.879 E0.01678 ; perimeter
G1 X64.781 Y60.748 E0.01654 ; perimeter
G1 X64.394 Y60.678 E0.01621 ; perimeter
G1 X64.009 Y60.674 E0.01584 ; perimeter
G1 X63.639 Y60.735 E0.01546 ; perimeter
G1 X63.295 Y60.863 E0.01513 ; perimeter
G1 X62.988 Y61.054 E0.01489 ; perimeter
G1 X62.893 Y61.145 E0.00544 ; perimeter
G1 X61.761 Y60.195 E0.06089 ; perimeter
G1 X62.082 Y59.871 E0.01881 ; perimeter
G1 X62.435 Y59.621 E0.01785 ; perimeter
G1 X62.834 Y59.428 E0.01825 ; perimeter
G1 X63.321 Y59.288 E0.02088 ; perimeter
G1 X63.747 Y59.232 E0.01767 ; perimeter
G1 X64.243 Y59.235 E0.02045 ; perimeter
G1 X64.769 Y59.313 E0.02193 ; perimeter
G1 X65.268 Y59.455 E0.02136 ; perimeter
G1 X65.760 Y59.664 E0.02200 ; perimeter
G1 X66.215 Y59.925 E0.02162 ; perimeter
G1 X66.678 Y60.267 E0.02372 ; perimeter
G1 X82.078 Y73.189 E0.82817 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y77.425 E0.12676 ; perimeter
G1 X100.105 Y77.425 E0.12565 ; perimeter
G1 X100.105 Y81.770 E0.17900 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.725 Y81.704 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.813 Y81.813 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X98.263 Y80.922 ; move to first infill point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7806.62
G1 X98.996 Y80.190 E0.04967 ; infill
G1 X98.996 Y79.537 E0.03126 ; infill
G1 X98.163 Y80.370 E0.05644 ; infill
G1 X98.163 Y79.718 E0.03126 ; infill
G1 X98.996 Y78.885 E0.05644 ; infill
G1 X98.996 Y78.534 E0.01684 ; infill
G1 X98.695 Y78.534 E0.01442 ; infill
G1 X97.962 Y79.267 E0.04966 ; infill
G1 F8640
G1 X98.695 Y78.534 E-0.23926 ; wipe and retract
G1 X98.996 Y78.534 E-0.06945 ; wipe and retract
G1 X98.996 Y78.885 E-0.08114 ; wipe and retract
G1 X98.163 Y79.718 E-0.27188 ; wipe and retract
G1 X98.163 Y80.144 E-0.09828 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.726 Y86.649 E0.15394 ; perimeter
G1 X76.070 Y86.239 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15394 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.747 Y78.282 E0.15394 ; perimeter
G1 X83.091 Y77.872 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15394 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.168 Y86.698 E0.15394 ; perimeter
G1 X76.021 Y85.680 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15394 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.188 Y78.331 E0.15394 ; perimeter
G1 X83.042 Y77.314 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15394 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.909 Y77.872 E0.15394 ; perimeter
G1 X167.253 Y78.282 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15394 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.930 Y86.239 E0.15394 ; perimeter
G1 X174.274 Y86.649 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15394 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X166.958 Y77.314 E0.15394 ; perimeter
G1 X167.812 Y78.331 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15394 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X173.979 Y85.680 E0.15394 ; perimeter
G1 X174.832 Y86.698 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15394 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X150.688 Y81.038 ; move to first perimeter point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.688 Y78.218 E0.11616 ; perimeter
G1 X152.153 Y78.218 E0.06034 ; perimeter
G1 X152.153 Y81.038 E0.11616 ; perimeter
G1 X150.748 Y81.038 E0.05786 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.292 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.292 Y77.822 E0.14881 ; perimeter
G1 X152.549 Y77.822 E0.09299 ; perimeter
G1 X152.549 Y80.899 E0.12676 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X183.568 Y60.578 E0.83362 ; perimeter
G1 X184.002 Y60.257 E0.02227 ; perimeter
G1 X184.417 Y60.019 E0.01969 ; perimeter
G1 X184.864 Y59.829 E0.02002 ; perimeter
G1 X185.315 Y59.701 E0.01932 ; perimeter
G1 X185.760 Y59.634 E0.01851 ; perimeter
G1 X186.228 Y59.628 E0.01930 ; perimeter
G1 X186.642 Y59.686 E0.01723 ; perimeter
G1 X186.974 Y59.783 E0.01426 ; perimeter
G1 X187.366 Y59.966 E0.01779 ; perimeter
G1 X187.654 Y60.169 E0.01454 ; perimeter
G1 X187.095 Y60.639 E0.03006 ; perimeter
G1 X186.881 Y60.505 E0.01039 ; perimeter
G1 X186.463 Y60.351 E0.01834 ; perimeter
G1 X186.021 Y60.277 E0.01847 ; perimeter
G1 X185.569 Y60.282 E0.01864 ; perimeter
G1 X185.118 Y60.363 E0.01884 ; perimeter
G1 X184.682 Y60.514 E0.01903 ; perimeter
G1 X184.275 Y60.727 E0.01893 ; perimeter
G1 X184.025 Y60.901 E0.01252 ; perimeter
G1 X168.261 Y74.121 E0.84755 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X150.352 Y81.434 E0.16713 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.895 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.895 Y77.425 E0.18147 ; perimeter
G1 X152.945 Y77.425 E0.12565 ; perimeter
G1 X152.945 Y80.502 E0.12676 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X183.322 Y60.267 E0.82817 ; perimeter
G1 X183.785 Y59.925 E0.02372 ; perimeter
G1 X184.240 Y59.664 E0.02162 ; perimeter
G1 X184.732 Y59.455 E0.02200 ; perimeter
G1 X185.231 Y59.313 E0.02137 ; perimeter
G1 X185.728 Y59.238 E0.02070 ; perimeter
G1 X186.253 Y59.232 E0.02165 ; perimeter
G1 X186.726 Y59.297 E0.01964 ; perimeter
G1 X187.115 Y59.411 E0.01671 ; perimeter
G1 X187.566 Y59.622 E0.02050 ; perimeter
G1 X187.918 Y59.871 E0.01779 ; perimeter
G1 X188.239 Y60.195 E0.01881 ; perimeter
G1 X187.107 Y61.145 E0.06089 ; perimeter
G1 X187.012 Y61.054 E0.00544 ; perimeter
G1 X186.705 Y60.863 E0.01489 ; perimeter
G1 X186.361 Y60.735 E0.01513 ; perimeter
G1 X185.991 Y60.674 E0.01546 ; perimeter
G1 X185.606 Y60.678 E0.01584 ; perimeter
G1 X185.219 Y60.748 E0.01621 ; perimeter
G1 X184.839 Y60.879 E0.01654 ; perimeter
G1 X184.481 Y61.067 E0.01669 ; perimeter
G1 X184.266 Y61.216 E0.01076 ; perimeter
G1 X168.405 Y74.517 E0.85275 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X149.955 Y81.830 E0.18940 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.035 Y81.455 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.911 Y78.539 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X151.104 Y80.922 ; move to first infill point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7806.62
G1 X151.837 Y80.190 E0.04967 ; infill
G1 X151.837 Y79.537 E0.03126 ; infill
G1 X151.004 Y80.370 E0.05644 ; infill
G1 X151.004 Y79.718 E0.03126 ; infill
G1 X151.837 Y78.885 E0.05644 ; infill
G1 X151.837 Y78.534 E0.01684 ; infill
G1 X151.536 Y78.534 E0.01442 ; infill
G1 X150.803 Y79.267 E0.04966 ; infill
G1 F8640
G1 X151.536 Y78.534 E-0.23925 ; wipe and retract
G1 X151.837 Y78.534 E-0.06945 ; wipe and retract
G1 X151.837 Y78.885 E-0.08114 ; wipe and retract
G1 X151.004 Y79.718 E-0.27188 ; wipe and retract
G1 X151.004 Y80.144 E-0.09828 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X192.055 Y71.729 ; move to first perimeter point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X191.711 Y71.319 E0.02205 ; perimeter
G1 X194.340 Y69.113 E0.14137 ; perimeter
G1 X190.929 Y65.048 E0.21861 ; perimeter
G1 X188.300 Y67.254 E0.14137 ; perimeter
G1 X187.956 Y66.844 E0.02205 ; perimeter
G1 X190.585 Y64.638 E0.14137 ; perimeter
G1 X188.136 Y61.719 E0.15696 ; perimeter
G1 X188.643 Y61.293 E0.02729 ; perimeter
G1 X197.640 Y72.016 E0.57663 ; perimeter
G1 X197.133 Y72.442 E0.02729 ; perimeter
G1 X194.684 Y69.523 E0.15696 ; perimeter
G1 X192.101 Y71.690 E0.13890 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.006 Y72.287 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X191.152 Y71.270 E0.05471 ; perimeter
G1 X193.781 Y69.064 E0.14137 ; perimeter
G1 X190.880 Y65.606 E0.18596 ; perimeter
G1 X188.251 Y67.812 E0.14137 ; perimeter
G1 X187.397 Y66.795 E0.05471 ; perimeter
G1 X190.026 Y64.589 E0.14137 ; perimeter
G1 X187.577 Y61.670 E0.15696 ; perimeter
G1 X188.692 Y60.735 E0.05995 ; perimeter
G1 X198.199 Y72.065 E0.60929 ; perimeter
G1 X197.084 Y73.000 E0.05995 ; perimeter
G1 X194.635 Y70.081 E0.15696 ; perimeter
G1 X192.052 Y72.249 E0.13890 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.048 Y71.889 F10800.000 ; move inwards before travel
G1 F8640
G1 X191.152 Y71.270 E-0.30695 ; wipe and retract
G1 X192.656 Y70.009 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X147.533 Y100.738 ; move to first perimeter point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X147.532 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E1.00423 ; perimeter
G1 X198.259 Y78.092 E1.41702 ; perimeter
G1 X198.579 Y77.783 E0.01834 ; perimeter
G1 X198.863 Y77.414 E0.01918 ; perimeter
G1 X199.087 Y77.010 E0.01903 ; perimeter
G1 X199.245 Y76.581 E0.01884 ; perimeter
G1 X199.329 Y76.136 E0.01864 ; perimeter
G1 X199.333 Y75.688 E0.01847 ; perimeter
G1 X199.253 Y75.250 E0.01834 ; perimeter
G1 X199.090 Y74.845 E0.01800 ; perimeter
G1 X198.920 Y74.580 E0.01297 ; perimeter
G1 X198.094 Y73.589 E0.05314 ; perimeter
G1 X198.602 Y73.162 E0.02737 ; perimeter
G1 X199.492 Y74.222 E0.05701 ; perimeter
G1 X199.711 Y74.535 E0.01572 ; perimeter
G1 X199.886 Y74.920 E0.01742 ; perimeter
G1 X199.973 Y75.233 E0.01341 ; perimeter
G1 X200.019 Y75.627 E0.01632 ; perimeter
G1 X199.999 Y76.082 E0.01877 ; perimeter
G1 X199.917 Y76.504 E0.01770 ; perimeter
G1 X199.774 Y76.931 E0.01858 ; perimeter
G1 X199.568 Y77.353 E0.01933 ; perimeter
G1 X199.309 Y77.753 E0.01965 ; perimeter
G1 X198.985 Y78.142 E0.02083 ; perimeter
G1 X198.606 Y78.500 E0.02147 ; perimeter
G1 X172.104 Y100.738 E1.42523 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X147.593 Y100.738 E0.73145 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.138 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X147.135 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E1.01465 ; perimeter
G1 X197.993 Y77.798 E1.41050 ; perimeter
G1 X198.282 Y77.518 E0.01657 ; perimeter
G1 X198.531 Y77.195 E0.01678 ; perimeter
G1 X198.726 Y76.845 E0.01654 ; perimeter
G1 X198.862 Y76.475 E0.01621 ; perimeter
G1 X198.933 Y76.097 E0.01584 ; perimeter
G1 X198.936 Y75.722 E0.01546 ; perimeter
G1 X198.870 Y75.361 E0.01513 ; perimeter
G1 X198.736 Y75.027 E0.01479 ; perimeter
G1 X198.600 Y74.815 E0.01041 ; perimeter
G1 X197.536 Y73.540 E0.06841 ; perimeter
G1 X198.651 Y72.604 E0.05998 ; perimeter
G1 X199.807 Y73.981 E0.07404 ; perimeter
G1 X200.057 Y74.337 E0.01794 ; perimeter
G1 X200.260 Y74.784 E0.02021 ; perimeter
G1 X200.363 Y75.157 E0.01595 ; perimeter
G1 X200.416 Y75.613 E0.01889 ; perimeter
G1 X200.394 Y76.128 E0.02127 ; perimeter
G1 X200.302 Y76.605 E0.02000 ; perimeter
G1 X200.141 Y77.082 E0.02072 ; perimeter
G1 X199.914 Y77.549 E0.02138 ; perimeter
G1 X199.629 Y77.989 E0.02163 ; perimeter
G1 X199.275 Y78.414 E0.02278 ; perimeter
G1 X198.870 Y78.796 E0.02292 ; perimeter
G1 X172.248 Y101.134 E1.43165 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X147.198 Y101.134 E0.73141 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.346 Y100.792 F10800.000 ; move inwards before travel
G1 F8640
G1 X147.135 Y99.806 E-0.30698 ; wipe and retract
G1 X149.097 Y99.806 E-0.45302 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X166.843 Y100.714 ; move to first infill point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.061 Y101.496 E0.05566 ; infill
G1 X166.061 Y101.931 E0.02188 ; infill
G1 X166.312 Y101.931 E0.01260 ; infill
G1 X167.327 Y100.915 E0.07230 ; infill
G1 X168.012 Y100.915 E0.03448 ; infill
G1 X166.996 Y101.931 E0.07230 ; infill
G1 X167.681 Y101.931 E0.03448 ; infill
G1 X168.697 Y100.915 E0.07230 ; infill
G1 X169.382 Y100.915 E0.03448 ; infill
G1 X168.366 Y101.931 E0.07230 ; infill
G1 X169.051 Y101.931 E0.03448 ; infill
G1 X169.744 Y101.238 E0.04931 ; infill
G1 X169.744 Y101.923 E0.03448 ; infill
G1 X169.535 Y102.131 E0.01484 ; infill
G1 F8640
G1 X169.744 Y101.923 E-0.06809 ; wipe and retract
G1 X169.744 Y101.238 E-0.15815 ; wipe and retract
G1 X169.051 Y101.931 E-0.22616 ; wipe and retract
G1 X168.366 Y101.931 E-0.15815 ; wipe and retract
G1 X168.824 Y101.473 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X102.181 Y138.884 ; move to first perimeter point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.73392 ; perimeter
M73 Q58 S58
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X51.108 Y116.646 E1.42523 ; perimeter
G1 X50.729 Y116.288 E0.02148 ; perimeter
G1 X50.411 Y115.907 E0.02046 ; perimeter
G1 X50.146 Y115.499 E0.02001 ; perimeter
G1 X49.941 Y115.078 E0.01932 ; perimeter
G1 X49.798 Y114.652 E0.01851 ; perimeter
G1 X49.711 Y114.190 E0.01937 ; perimeter
G1 X49.695 Y113.819 E0.01527 ; perimeter
G1 X49.742 Y113.378 E0.01828 ; perimeter
G1 X49.845 Y113.016 E0.01550 ; perimeter
G1 X50.001 Y112.685 E0.01509 ; perimeter
G1 X50.223 Y112.368 E0.01591 ; perimeter
G1 X51.112 Y111.308 E0.05701 ; perimeter
G1 X51.620 Y111.734 E0.02729 ; perimeter
G1 X50.855 Y112.646 E0.04901 ; perimeter
G1 X50.627 Y112.985 E0.01685 ; perimeter
G1 X50.462 Y113.396 E0.01826 ; perimeter
G1 X50.382 Y113.834 E0.01834 ; perimeter
G1 X50.386 Y114.282 E0.01847 ; perimeter
G1 X50.470 Y114.727 E0.01864 ; perimeter
G1 X50.627 Y115.157 E0.01884 ; perimeter
G1 X50.852 Y115.560 E0.01903 ; perimeter
G1 X51.136 Y115.929 E0.01917 ; perimeter
G1 X51.456 Y116.239 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.41702 ; perimeter
G1 X102.183 Y138.349 E1.00423 ; perimeter
G1 X102.182 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.577 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.73388 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03671 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X50.845 Y116.942 E1.43165 ; perimeter
G1 X50.440 Y116.560 E0.02293 ; perimeter
G1 X50.091 Y116.142 E0.02241 ; perimeter
G1 X49.801 Y115.695 E0.02200 ; perimeter
G1 X49.574 Y115.228 E0.02137 ; perimeter
G1 X49.413 Y114.752 E0.02070 ; perimeter
G1 X49.316 Y114.235 E0.02167 ; perimeter
G1 X49.298 Y113.807 E0.01765 ; perimeter
G1 X49.352 Y113.303 E0.02088 ; perimeter
G1 X49.472 Y112.876 E0.01825 ; perimeter
G1 X49.657 Y112.485 E0.01785 ; perimeter
G1 X49.908 Y112.127 E0.01801 ; perimeter
G1 X51.063 Y110.750 E0.07404 ; perimeter
G1 X52.178 Y111.685 E0.05995 ; perimeter
G1 X51.172 Y112.884 E0.06447 ; perimeter
G1 X50.979 Y113.172 E0.01426 ; perimeter
G1 X50.845 Y113.507 E0.01489 ; perimeter
G1 X50.779 Y113.868 E0.01513 ; perimeter
G1 X50.782 Y114.244 E0.01546 ; perimeter
G1 X50.853 Y114.621 E0.01584 ; perimeter
G1 X50.989 Y114.991 E0.01621 ; perimeter
G1 X51.184 Y115.342 E0.01654 ; perimeter
G1 X51.433 Y115.664 E0.01678 ; perimeter
G1 X51.721 Y115.944 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.41050 ; perimeter
G1 X102.580 Y137.952 E1.01465 ; perimeter
G1 X102.577 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.177 Y139.273 F10800.000 ; move inwards before travel
G1 F8640
G1 X99.286 Y139.231 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X83.445 Y140.278 ; move to first infill point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.654 Y140.069 E0.01484 ; infill
G1 X83.654 Y139.384 E0.03448 ; infill
G1 X82.961 Y140.077 E0.04931 ; infill
G1 X82.276 Y140.077 E0.03448 ; infill
G1 X83.292 Y139.061 E0.07230 ; infill
G1 X82.607 Y139.061 E0.03448 ; infill
G1 X81.591 Y140.077 E0.07230 ; infill
G1 X80.906 Y140.077 E0.03448 ; infill
G1 X81.922 Y139.061 E0.07230 ; infill
G1 X81.237 Y139.061 E0.03448 ; infill
G1 X80.221 Y140.077 E0.07230 ; infill
G1 X79.971 Y140.077 E0.01260 ; infill
G1 X79.971 Y139.642 E0.02188 ; infill
G1 X80.753 Y138.860 E0.05566 ; infill
G1 F8640
G1 X79.971 Y139.642 E-0.25530 ; wipe and retract
G1 X79.971 Y140.077 E-0.10036 ; wipe and retract
G1 X80.221 Y140.077 E-0.05779 ; wipe and retract
G1 X81.237 Y139.061 E-0.33164 ; wipe and retract
G1 X81.301 Y139.061 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X57.660 Y109.875 ; move to first perimeter point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X55.031 Y107.669 E0.14137 ; perimeter
G1 X52.582 Y110.588 E0.15696 ; perimeter
G1 X52.074 Y110.162 E0.02729 ; perimeter
G1 X61.072 Y99.439 E0.57663 ; perimeter
G1 X61.579 Y99.865 E0.02729 ; perimeter
G1 X59.130 Y102.784 E0.15696 ; perimeter
G1 X61.759 Y104.990 E0.14137 ; perimeter
G1 X61.415 Y105.400 E0.02205 ; perimeter
G1 X58.786 Y103.194 E0.14137 ; perimeter
G1 X55.375 Y107.259 E0.21861 ; perimeter
G1 X58.004 Y109.465 E0.14137 ; perimeter
G1 X57.698 Y109.829 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.709 Y110.433 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X55.080 Y108.227 E0.14137 ; perimeter
G1 X52.631 Y111.146 E0.15696 ; perimeter
G1 X51.516 Y110.211 E0.05995 ; perimeter
G1 X61.023 Y98.881 E0.60929 ; perimeter
G1 X62.138 Y99.816 E0.05995 ; perimeter
G1 X59.689 Y102.735 E0.15696 ; perimeter
G1 X62.318 Y104.941 E0.14137 ; perimeter
G1 X61.464 Y105.958 E0.05471 ; perimeter
G1 X58.835 Y103.752 E0.14137 ; perimeter
G1 X55.933 Y107.210 E0.18596 ; perimeter
G1 X58.562 Y109.416 E0.14137 ; perimeter
G1 X57.747 Y110.387 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.436 Y110.141 F10800.000 ; move inwards before travel
G1 F8640
G1 X55.189 Y108.316 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X99.027 Y119.184 ; move to first perimeter point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 P58 R56
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.06034 ; perimeter
G1 X97.562 Y116.364 E0.11616 ; perimeter
G1 X99.027 Y116.364 E0.06034 ; perimeter
G1 X99.027 Y119.124 E0.11369 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.423 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.16960 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X65.806 Y99.137 E0.84150 ; perimeter
G1 X65.445 Y98.876 E0.01834 ; perimeter
G1 X65.033 Y98.660 E0.01917 ; perimeter
G1 X64.596 Y98.509 E0.01903 ; perimeter
G1 X64.146 Y98.428 E0.01884 ; perimeter
G1 X63.694 Y98.423 E0.01864 ; perimeter
G1 X63.251 Y98.497 E0.01847 ; perimeter
G1 X62.834 Y98.652 E0.01834 ; perimeter
G1 X62.620 Y98.785 E0.01039 ; perimeter
G1 X62.061 Y98.316 E0.03006 ; perimeter
G1 X62.352 Y98.110 E0.01469 ; perimeter
G1 X62.691 Y97.946 E0.01550 ; perimeter
G1 X63.118 Y97.823 E0.01828 ; perimeter
G1 X63.486 Y97.774 E0.01531 ; perimeter
G1 X63.927 Y97.778 E0.01817 ; perimeter
G1 X64.401 Y97.847 E0.01971 ; perimeter
G1 X64.850 Y97.976 E0.01927 ; perimeter
G1 X65.298 Y98.166 E0.02002 ; perimeter
G1 X65.713 Y98.403 E0.01969 ; perimeter
G1 X66.147 Y98.725 E0.02227 ; perimeter
G1 X81.649 Y111.732 E0.83362 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y115.968 E0.12676 ; perimeter
G1 X99.423 Y115.968 E0.09299 ; perimeter
G1 X99.423 Y119.520 E0.14634 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.819 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.19187 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X65.562 Y99.450 E0.84686 ; perimeter
G1 X65.236 Y99.214 E0.01657 ; perimeter
G1 X64.875 Y99.025 E0.01678 ; perimeter
G1 X64.496 Y98.894 E0.01654 ; perimeter
G1 X64.109 Y98.824 E0.01621 ; perimeter
G1 X63.724 Y98.820 E0.01584 ; perimeter
G1 X63.354 Y98.881 E0.01546 ; perimeter
G1 X63.009 Y99.009 E0.01513 ; perimeter
G1 X62.703 Y99.200 E0.01489 ; perimeter
G1 X62.608 Y99.292 E0.00544 ; perimeter
G1 X61.475 Y98.342 E0.06089 ; perimeter
G1 X61.797 Y98.017 E0.01881 ; perimeter
G1 X62.150 Y97.767 E0.01785 ; perimeter
G1 X62.549 Y97.575 E0.01825 ; perimeter
G1 X63.036 Y97.434 E0.02088 ; perimeter
G1 X63.461 Y97.378 E0.01767 ; perimeter
G1 X63.958 Y97.381 E0.02045 ; perimeter
G1 X64.484 Y97.459 E0.02193 ; perimeter
G1 X64.983 Y97.601 E0.02136 ; perimeter
G1 X65.474 Y97.810 E0.02200 ; perimeter
G1 X65.930 Y98.071 E0.02162 ; perimeter
G1 X66.393 Y98.413 E0.02372 ; perimeter
G1 X81.793 Y111.335 E0.82817 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y115.571 E0.12676 ; perimeter
G1 X99.819 Y115.571 E0.12565 ; perimeter
G1 X99.819 Y119.916 E0.17900 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.440 Y119.850 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.528 Y119.959 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X97.978 Y119.069 ; move to first infill point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7806.62
G1 X98.711 Y118.336 E0.04967 ; infill
G1 X98.711 Y117.684 E0.03126 ; infill
G1 X97.878 Y118.516 E0.05644 ; infill
G1 X97.878 Y117.864 E0.03126 ; infill
G1 X98.711 Y117.031 E0.05644 ; infill
G1 X98.711 Y116.680 E0.01684 ; infill
G1 X98.410 Y116.680 E0.01442 ; infill
G1 X97.677 Y117.413 E0.04966 ; infill
G1 F8640
G1 X98.410 Y116.680 E-0.23926 ; wipe and retract
G1 X98.711 Y116.680 E-0.06945 ; wipe and retract
G1 X98.711 Y117.031 E-0.08114 ; wipe and retract
G1 X97.878 Y117.864 E-0.27188 ; wipe and retract
G1 X97.878 Y118.290 E-0.09828 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.441 Y124.795 E0.15394 ; perimeter
G1 X75.785 Y124.385 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15394 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.461 Y116.428 E0.15394 ; perimeter
G1 X82.805 Y116.018 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15394 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.882 Y124.844 E0.15394 ; perimeter
G1 X75.736 Y123.826 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15394 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.903 Y116.477 E0.15394 ; perimeter
G1 X82.757 Y115.460 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15394 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.624 Y116.018 E0.15394 ; perimeter
G1 X166.968 Y116.428 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15394 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.645 Y124.385 E0.15394 ; perimeter
G1 X173.989 Y124.795 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15394 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.673 Y115.460 E0.15394 ; perimeter
G1 X167.527 Y116.477 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15394 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.694 Y123.826 E0.15394 ; perimeter
G1 X174.547 Y124.844 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15394 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X150.403 Y119.184 ; move to first perimeter point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.403 Y116.364 E0.11616 ; perimeter
G1 X151.868 Y116.364 E0.06034 ; perimeter
G1 X151.868 Y119.184 E0.11616 ; perimeter
G1 X150.463 Y119.184 E0.05786 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.007 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.007 Y115.968 E0.14881 ; perimeter
G1 X152.264 Y115.968 E0.09299 ; perimeter
G1 X152.264 Y119.045 E0.12676 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X183.282 Y98.725 E0.83362 ; perimeter
G1 X183.717 Y98.403 E0.02227 ; perimeter
G1 X184.132 Y98.166 E0.01969 ; perimeter
G1 X184.579 Y97.976 E0.02002 ; perimeter
G1 X185.030 Y97.847 E0.01932 ; perimeter
G1 X185.475 Y97.780 E0.01851 ; perimeter
G1 X185.943 Y97.775 E0.01930 ; perimeter
G1 X186.357 Y97.832 E0.01723 ; perimeter
G1 X186.689 Y97.929 E0.01426 ; perimeter
G1 X187.081 Y98.112 E0.01779 ; perimeter
G1 X187.369 Y98.316 E0.01454 ; perimeter
G1 X186.810 Y98.785 E0.03006 ; perimeter
G1 X186.596 Y98.652 E0.01039 ; perimeter
G1 X186.178 Y98.497 E0.01834 ; perimeter
G1 X185.736 Y98.423 E0.01847 ; perimeter
G1 X185.283 Y98.428 E0.01864 ; perimeter
G1 X184.833 Y98.509 E0.01884 ; perimeter
G1 X184.397 Y98.660 E0.01903 ; perimeter
G1 X183.989 Y98.873 E0.01893 ; perimeter
G1 X183.740 Y99.047 E0.01252 ; perimeter
G1 X167.976 Y112.267 E0.84755 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X150.067 Y119.580 E0.16713 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.610 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.610 Y115.571 E0.18147 ; perimeter
G1 X152.660 Y115.571 E0.12565 ; perimeter
G1 X152.660 Y118.648 E0.12676 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X183.037 Y98.413 E0.82817 ; perimeter
G1 X183.500 Y98.071 E0.02372 ; perimeter
G1 X183.955 Y97.810 E0.02162 ; perimeter
G1 X184.447 Y97.601 E0.02200 ; perimeter
G1 X184.946 Y97.459 E0.02137 ; perimeter
G1 X185.443 Y97.384 E0.02070 ; perimeter
G1 X185.968 Y97.378 E0.02165 ; perimeter
G1 X186.440 Y97.443 E0.01964 ; perimeter
G1 X186.830 Y97.557 E0.01671 ; perimeter
G1 X187.280 Y97.768 E0.02050 ; perimeter
G1 X187.633 Y98.017 E0.01779 ; perimeter
G1 X187.954 Y98.342 E0.01881 ; perimeter
G1 X186.822 Y99.292 E0.06089 ; perimeter
G1 X186.727 Y99.200 E0.00544 ; perimeter
G1 X186.420 Y99.009 E0.01489 ; perimeter
G1 X186.076 Y98.881 E0.01513 ; perimeter
G1 X185.705 Y98.820 E0.01546 ; perimeter
G1 X185.321 Y98.824 E0.01584 ; perimeter
G1 X184.934 Y98.894 E0.01621 ; perimeter
G1 X184.554 Y99.025 E0.01654 ; perimeter
G1 X184.195 Y99.213 E0.01669 ; perimeter
G1 X183.981 Y99.362 E0.01076 ; perimeter
G1 X168.120 Y112.663 E0.85275 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X149.670 Y119.976 E0.18940 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.750 Y119.602 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.625 Y116.685 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X150.819 Y119.069 ; move to first infill point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7806.62
G1 X151.552 Y118.336 E0.04967 ; infill
G1 X151.552 Y117.684 E0.03126 ; infill
G1 X150.719 Y118.516 E0.05644 ; infill
G1 X150.719 Y117.864 E0.03126 ; infill
G1 X151.552 Y117.031 E0.05644 ; infill
G1 X151.552 Y116.680 E0.01684 ; infill
G1 X151.251 Y116.680 E0.01442 ; infill
G1 X150.518 Y117.413 E0.04966 ; infill
G1 F8640
G1 X151.251 Y116.680 E-0.23925 ; wipe and retract
G1 X151.552 Y116.680 E-0.06945 ; wipe and retract
G1 X151.552 Y117.031 E-0.08114 ; wipe and retract
G1 X150.719 Y117.864 E-0.27188 ; wipe and retract
G1 X150.719 Y118.290 E-0.09828 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X191.770 Y109.875 ; move to first perimeter point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X191.426 Y109.465 E0.02205 ; perimeter
G1 X194.055 Y107.259 E0.14137 ; perimeter
G1 X190.643 Y103.194 E0.21861 ; perimeter
G1 X188.015 Y105.400 E0.14137 ; perimeter
G1 X187.671 Y104.990 E0.02205 ; perimeter
G1 X190.299 Y102.784 E0.14137 ; perimeter
G1 X187.850 Y99.865 E0.15696 ; perimeter
G1 X188.358 Y99.439 E0.02729 ; perimeter
G1 X197.355 Y110.162 E0.57663 ; perimeter
G1 X196.848 Y110.588 E0.02729 ; perimeter
G1 X194.399 Y107.669 E0.15696 ; perimeter
G1 X191.816 Y109.836 E0.13890 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.721 Y110.433 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X190.867 Y109.416 E0.05471 ; perimeter
G1 X193.496 Y107.210 E0.14137 ; perimeter
G1 X190.595 Y103.752 E0.18596 ; perimeter
G1 X187.966 Y105.958 E0.14137 ; perimeter
G1 X187.112 Y104.941 E0.05471 ; perimeter
G1 X189.741 Y102.735 E0.14137 ; perimeter
G1 X187.292 Y99.816 E0.15696 ; perimeter
G1 X188.407 Y98.881 E0.05995 ; perimeter
G1 X197.914 Y110.211 E0.60929 ; perimeter
G1 X196.799 Y111.146 E0.05995 ; perimeter
G1 X194.350 Y108.227 E0.15696 ; perimeter
G1 X191.767 Y110.395 E0.13890 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.763 Y110.036 F10800.000 ; move inwards before travel
G1 F8640
G1 X190.867 Y109.416 E-0.30695 ; wipe and retract
G1 X192.370 Y108.155 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X147.248 Y138.884 ; move to first perimeter point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X147.247 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E1.00423 ; perimeter
G1 X197.974 Y116.239 E1.41702 ; perimeter
G1 X198.293 Y115.929 E0.01834 ; perimeter
G1 X198.578 Y115.560 E0.01918 ; perimeter
G1 X198.802 Y115.157 E0.01903 ; perimeter
G1 X198.960 Y114.727 E0.01884 ; perimeter
G1 X199.044 Y114.282 E0.01864 ; perimeter
G1 X199.048 Y113.834 E0.01847 ; perimeter
G1 X198.968 Y113.396 E0.01834 ; perimeter
G1 X198.805 Y112.991 E0.01800 ; perimeter
G1 X198.635 Y112.726 E0.01297 ; perimeter
G1 X197.808 Y111.735 E0.05314 ; perimeter
G1 X198.317 Y111.308 E0.02737 ; perimeter
G1 X199.207 Y112.368 E0.05701 ; perimeter
G1 X199.426 Y112.681 E0.01572 ; perimeter
G1 X199.601 Y113.066 E0.01742 ; perimeter
G1 X199.688 Y113.379 E0.01341 ; perimeter
G1 X199.733 Y113.773 E0.01632 ; perimeter
G1 X199.714 Y114.228 E0.01877 ; perimeter
G1 X199.632 Y114.650 E0.01770 ; perimeter
G1 X199.488 Y115.078 E0.01858 ; perimeter
G1 X199.283 Y115.499 E0.01933 ; perimeter
G1 X199.024 Y115.900 E0.01965 ; perimeter
G1 X198.700 Y116.288 E0.02083 ; perimeter
G1 X198.321 Y116.646 E0.02147 ; perimeter
G1 X171.819 Y138.884 E1.42523 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X147.308 Y138.884 E0.73145 ; perimeter
M204 S1000 ; adjust acceleration
G1 X146.853 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X146.850 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E1.01465 ; perimeter
G1 X197.708 Y115.944 E1.41050 ; perimeter
G1 X197.997 Y115.664 E0.01657 ; perimeter
G1 X198.246 Y115.342 E0.01678 ; perimeter
G1 X198.441 Y114.991 E0.01654 ; perimeter
G1 X198.576 Y114.621 E0.01621 ; perimeter
G1 X198.648 Y114.244 E0.01584 ; perimeter
G1 X198.651 Y113.868 E0.01546 ; perimeter
G1 X198.585 Y113.507 E0.01513 ; perimeter
G1 X198.451 Y113.174 E0.01479 ; perimeter
G1 X198.314 Y112.961 E0.01041 ; perimeter
G1 X197.251 Y111.686 E0.06841 ; perimeter
G1 X198.366 Y110.750 E0.05998 ; perimeter
G1 X199.521 Y112.127 E0.07404 ; perimeter
G1 X199.772 Y112.483 E0.01794 ; perimeter
G1 X199.975 Y112.930 E0.02021 ; perimeter
G1 X200.078 Y113.303 E0.01595 ; perimeter
G1 X200.131 Y113.759 E0.01889 ; perimeter
G1 X200.108 Y114.275 E0.02127 ; perimeter
G1 X200.016 Y114.751 E0.02000 ; perimeter
G1 X199.856 Y115.228 E0.02072 ; perimeter
G1 X199.629 Y115.695 E0.02138 ; perimeter
G1 X199.343 Y116.135 E0.02163 ; perimeter
G1 X198.989 Y116.560 E0.02278 ; perimeter
G1 X198.585 Y116.942 E0.02292 ; perimeter
G1 X171.963 Y139.280 E1.43165 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X146.913 Y139.280 E0.73141 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.060 Y138.939 F10800.000 ; move inwards before travel
G1 F8640
G1 X146.850 Y137.952 E-0.30698 ; wipe and retract
G1 X148.812 Y137.952 E-0.45302 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
G1 X166.558 Y138.860 ; move to first infill point
G1 Z12.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.776 Y139.642 E0.05566 ; infill
G1 X165.776 Y140.077 E0.02188 ; infill
G1 X166.026 Y140.077 E0.01260 ; infill
G1 X167.042 Y139.061 E0.07230 ; infill
G1 X167.727 Y139.061 E0.03448 ; infill
G1 X166.711 Y140.077 E0.07230 ; infill
G1 X167.396 Y140.077 E0.03448 ; infill
G1 X168.412 Y139.061 E0.07230 ; infill
G1 X169.097 Y139.061 E0.03448 ; infill
G1 X168.081 Y140.077 E0.07230 ; infill
G1 X168.766 Y140.077 E0.03448 ; infill
G1 X169.459 Y139.384 E0.04931 ; infill
G1 X169.459 Y140.069 E0.03448 ; infill
G1 X169.250 Y140.278 E0.01484 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;12.75


G1 F8640
G1 X169.459 Y140.069 E-0.06809 ; wipe and retract
G1 X169.459 Y139.384 E-0.15815 ; wipe and retract
G1 X168.766 Y140.077 E-0.22616 ; wipe and retract
G1 X168.081 Y140.077 E-0.15815 ; wipe and retract
G1 X168.539 Y139.619 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;12.75
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X102.108 Y100.738 ; move to first perimeter point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.71914 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X51.259 Y78.387 E1.43244 ; perimeter
G1 X50.881 Y78.030 E0.02145 ; perimeter
G1 X50.563 Y77.649 E0.02043 ; perimeter
G1 X50.299 Y77.244 E0.01991 ; perimeter
G1 X50.094 Y76.824 E0.01928 ; perimeter
G1 X49.950 Y76.397 E0.01854 ; perimeter
G1 X49.868 Y75.975 E0.01774 ; perimeter
G1 X49.847 Y75.567 E0.01682 ; perimeter
G1 X49.894 Y75.115 E0.01870 ; perimeter
G1 X49.996 Y74.755 E0.01542 ; perimeter
G1 X50.152 Y74.425 E0.01505 ; perimeter
G1 X50.374 Y74.110 E0.01587 ; perimeter
G1 X51.263 Y73.050 E0.05701 ; perimeter
G1 X51.771 Y73.476 E0.02729 ; perimeter
G1 X51.006 Y74.387 E0.04901 ; perimeter
G1 X50.778 Y74.726 E0.01685 ; perimeter
G1 X50.613 Y75.138 E0.01826 ; perimeter
G1 X50.533 Y75.575 E0.01834 ; perimeter
G1 X50.537 Y76.024 E0.01847 ; perimeter
G1 X50.621 Y76.469 E0.01864 ; perimeter
G1 X50.779 Y76.898 E0.01884 ; perimeter
G1 X51.003 Y77.301 E0.01903 ; perimeter
G1 X51.287 Y77.670 E0.01917 ; perimeter
G1 X51.607 Y77.980 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.42424 ; perimeter
G1 X102.107 Y100.203 E0.98936 ; perimeter
G1 X102.108 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.505 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.71917 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03671 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X50.996 Y78.683 E1.43886 ; perimeter
G1 X50.592 Y78.302 E0.02289 ; perimeter
G1 X50.244 Y77.885 E0.02237 ; perimeter
G1 X49.954 Y77.440 E0.02189 ; perimeter
G1 X49.727 Y76.975 E0.02132 ; perimeter
G1 X49.566 Y76.499 E0.02068 ; perimeter
G1 X49.473 Y76.023 E0.01998 ; perimeter
G1 X49.449 Y75.556 E0.01925 ; perimeter
G1 X49.504 Y75.040 E0.02138 ; perimeter
G1 X49.624 Y74.616 E0.01818 ; perimeter
G1 X49.809 Y74.225 E0.01780 ; perimeter
G1 X50.059 Y73.868 E0.01797 ; perimeter
G1 X51.215 Y72.491 E0.07404 ; perimeter
G1 X52.329 Y73.427 E0.05995 ; perimeter
G1 X51.323 Y74.626 E0.06447 ; perimeter
G1 X51.130 Y74.913 E0.01426 ; perimeter
G1 X50.996 Y75.248 E0.01489 ; perimeter
G1 X50.930 Y75.610 E0.01513 ; perimeter
G1 X50.933 Y75.985 E0.01546 ; perimeter
G1 X51.004 Y76.363 E0.01584 ; perimeter
G1 X51.140 Y76.732 E0.01621 ; perimeter
G1 X51.335 Y77.083 E0.01654 ; perimeter
G1 X51.584 Y77.406 E0.01678 ; perimeter
G1 X51.873 Y77.685 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.41771 ; perimeter
G1 X102.502 Y99.806 E0.99971 ; perimeter
G1 X102.505 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.105 Y101.127 F10800.000 ; move inwards before travel
G1 F8640
G1 X99.213 Y101.086 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X84.140 Y101.697 ; move to first infill point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.358 Y100.915 E0.05567 ; infill
G1 X82.673 Y100.915 E0.03448 ; infill
G1 X83.688 Y101.931 E0.07230 ; infill
G1 X83.003 Y101.931 E0.03448 ; infill
G1 X81.988 Y100.915 E0.07230 ; infill
G1 X81.303 Y100.915 E0.03448 ; infill
G1 X82.318 Y101.931 E0.07230 ; infill
G1 X81.634 Y101.931 E0.03448 ; infill
G1 X80.618 Y100.915 E0.07230 ; infill
G1 X80.256 Y100.915 E0.01821 ; infill
G1 X80.256 Y101.238 E0.01627 ; infill
G1 X80.949 Y101.931 E0.04930 ; infill
G1 X80.264 Y101.931 E0.03448 ; infill
G1 X80.055 Y101.722 E0.01483 ; infill
G1 F8640
G1 X80.264 Y101.931 E-0.06804 ; wipe and retract
G1 X80.949 Y101.931 E-0.15815 ; wipe and retract
G1 X80.256 Y101.238 E-0.22612 ; wipe and retract
G1 X80.256 Y100.915 E-0.07462 ; wipe and retract
G1 X80.618 Y100.915 E-0.08353 ; wipe and retract
G1 X81.076 Y101.373 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X57.806 Y71.612 ; move to first perimeter point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X55.182 Y69.410 E0.14110 ; perimeter
G1 X52.733 Y72.329 E0.15696 ; perimeter
G1 X52.225 Y71.903 E0.02729 ; perimeter
G1 X61.223 Y61.181 E0.57663 ; perimeter
G1 X61.730 Y61.606 E0.02729 ; perimeter
G1 X59.281 Y64.525 E0.15696 ; perimeter
G1 X61.905 Y66.727 E0.14110 ; perimeter
G1 X61.561 Y67.137 E0.02205 ; perimeter
G1 X58.937 Y64.935 E0.14110 ; perimeter
G1 X55.526 Y69.000 E0.21861 ; perimeter
G1 X58.150 Y71.202 E0.14110 ; perimeter
G1 X57.844 Y71.566 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.855 Y72.170 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X55.231 Y69.969 E0.14110 ; perimeter
G1 X52.782 Y72.887 E0.15696 ; perimeter
G1 X51.667 Y71.952 E0.05995 ; perimeter
G1 X61.174 Y60.622 E0.60929 ; perimeter
G1 X62.289 Y61.558 E0.05995 ; perimeter
G1 X59.840 Y64.476 E0.15696 ; perimeter
G1 X62.464 Y66.678 E0.14110 ; perimeter
G1 X61.610 Y67.695 E0.05471 ; perimeter
G1 X58.986 Y65.494 E0.14110 ; perimeter
G1 X56.085 Y68.951 E0.18596 ; perimeter
G1 X58.708 Y71.153 E0.14110 ; perimeter
G1 X57.893 Y72.124 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.582 Y71.878 F10800.000 ; move inwards before travel
G1 F8640
G1 X55.335 Y70.053 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X99.062 Y81.038 ; move to first perimeter point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.05004 ; perimeter
G1 X97.847 Y78.043 E0.12337 ; perimeter
G1 X99.062 Y78.043 E0.05004 ; perimeter
G1 X99.062 Y80.978 E0.12090 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.458 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.15930 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X65.957 Y60.878 E0.84871 ; perimeter
G1 X65.596 Y60.617 E0.01834 ; perimeter
G1 X65.184 Y60.401 E0.01917 ; perimeter
G1 X64.748 Y60.250 E0.01903 ; perimeter
G1 X64.297 Y60.170 E0.01884 ; perimeter
G1 X63.845 Y60.164 E0.01864 ; perimeter
G1 X63.403 Y60.238 E0.01847 ; perimeter
G1 X62.985 Y60.393 E0.01834 ; perimeter
G1 X62.771 Y60.526 E0.01039 ; perimeter
G1 X62.212 Y60.057 E0.03006 ; perimeter
G1 X62.502 Y59.852 E0.01461 ; perimeter
G1 X62.839 Y59.689 E0.01542 ; perimeter
G1 X63.278 Y59.563 E0.01881 ; perimeter
G1 X63.631 Y59.516 E0.01468 ; perimeter
G1 X64.070 Y59.519 E0.01811 ; perimeter
G1 X64.557 Y59.590 E0.02027 ; perimeter
G1 X65.005 Y59.718 E0.01920 ; perimeter
G1 X65.450 Y59.908 E0.01991 ; perimeter
G1 X65.872 Y60.150 E0.02005 ; perimeter
G1 X66.298 Y60.466 E0.02184 ; perimeter
G1 X81.934 Y73.586 E0.84085 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y77.646 E0.13397 ; perimeter
G1 X99.458 Y77.646 E0.08269 ; perimeter
G1 X99.458 Y81.374 E0.15355 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.855 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.18157 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X65.713 Y61.191 E0.85407 ; perimeter
G1 X65.387 Y60.955 E0.01657 ; perimeter
G1 X65.026 Y60.766 E0.01678 ; perimeter
G1 X64.647 Y60.635 E0.01654 ; perimeter
G1 X64.260 Y60.566 E0.01621 ; perimeter
G1 X63.875 Y60.561 E0.01584 ; perimeter
G1 X63.505 Y60.623 E0.01546 ; perimeter
G1 X63.161 Y60.751 E0.01513 ; perimeter
G1 X62.854 Y60.941 E0.01489 ; perimeter
G1 X62.759 Y61.033 E0.00544 ; perimeter
G1 X61.626 Y60.083 E0.06089 ; perimeter
G1 X61.947 Y59.759 E0.01876 ; perimeter
G1 X62.299 Y59.510 E0.01780 ; perimeter
G1 X62.697 Y59.317 E0.01818 ; perimeter
G1 X63.196 Y59.174 E0.02142 ; perimeter
G1 X63.606 Y59.120 E0.01701 ; perimeter
G1 X64.100 Y59.122 E0.02038 ; perimeter
G1 X64.641 Y59.202 E0.02251 ; perimeter
G1 X65.138 Y59.344 E0.02129 ; perimeter
G1 X65.627 Y59.552 E0.02189 ; perimeter
G1 X66.090 Y59.818 E0.02198 ; perimeter
G1 X66.544 Y60.154 E0.02329 ; perimeter
G1 X82.078 Y73.189 E0.83539 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y77.250 E0.13397 ; perimeter
G1 X99.855 Y77.250 E0.11535 ; perimeter
G1 X99.855 Y81.770 E0.18621 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.478 Y81.697 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.563 Y81.815 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X98.877 Y80.922 ; move to first infill point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7959.06
G1 X98.163 Y80.208 E0.04747 ; infill
G1 X98.163 Y79.569 E0.03007 ; infill
G1 X98.746 Y80.151 E0.03873 ; infill
G1 X98.746 Y79.512 E0.03007 ; infill
G1 X98.163 Y78.929 E0.03873 ; infill
G1 X98.163 Y78.359 E0.02681 ; infill
G1 X98.233 Y78.359 E0.00326 ; infill
G1 X98.947 Y79.073 E0.04748 ; infill
G1 F8640
G1 X98.233 Y78.359 E-0.23318 ; wipe and retract
G1 X98.163 Y78.359 E-0.01602 ; wipe and retract
G1 X98.163 Y78.929 E-0.13168 ; wipe and retract
G1 X98.746 Y79.512 E-0.19025 ; wipe and retract
G1 X98.746 Y80.151 E-0.14770 ; wipe and retract
G1 X98.620 Y80.025 E-0.04117 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q58 S57
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.788 Y86.701 E0.15060 ; perimeter
G1 X76.132 Y86.291 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.15060 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.809 Y78.334 E0.15060 ; perimeter
G1 X83.153 Y77.924 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.15060 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.230 Y86.750 E0.15060 ; perimeter
G1 X76.083 Y85.733 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.15060 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.250 Y78.383 E0.15060 ; perimeter
G1 X83.104 Y77.366 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.15060 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.847 Y77.924 E0.15060 ; perimeter
G1 X167.191 Y78.334 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.15060 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.868 Y86.291 E0.15060 ; perimeter
G1 X174.212 Y86.701 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.15060 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X166.896 Y77.366 E0.15060 ; perimeter
G1 X167.750 Y78.383 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.15060 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X173.917 Y85.733 E0.15060 ; perimeter
G1 X174.770 Y86.750 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.15060 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X150.938 Y81.038 ; move to first perimeter point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.938 Y78.043 E0.12337 ; perimeter
G1 X152.153 Y78.043 E0.05004 ; perimeter
G1 X152.153 Y81.038 E0.12337 ; perimeter
G1 X150.998 Y81.038 E0.04756 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.542 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.542 Y77.646 E0.15603 ; perimeter
G1 X152.549 Y77.646 E0.08269 ; perimeter
G1 X152.549 Y80.899 E0.13397 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X183.702 Y60.466 E0.84085 ; perimeter
G1 X184.128 Y60.150 E0.02184 ; perimeter
G1 X184.550 Y59.908 E0.02005 ; perimeter
G1 X184.995 Y59.718 E0.01991 ; perimeter
G1 X185.444 Y59.589 E0.01928 ; perimeter
G1 X185.887 Y59.522 E0.01845 ; perimeter
G1 X186.369 Y59.517 E0.01984 ; perimeter
G1 X186.781 Y59.574 E0.01716 ; perimeter
G1 X187.099 Y59.667 E0.01365 ; perimeter
G1 X187.502 Y59.855 E0.01831 ; perimeter
G1 X187.788 Y60.057 E0.01442 ; perimeter
G1 X187.229 Y60.526 E0.03006 ; perimeter
G1 X187.015 Y60.393 E0.01039 ; perimeter
G1 X186.597 Y60.238 E0.01834 ; perimeter
G1 X186.155 Y60.164 E0.01847 ; perimeter
G1 X185.703 Y60.170 E0.01864 ; perimeter
G1 X185.253 Y60.250 E0.01884 ; perimeter
G1 X184.816 Y60.401 E0.01903 ; perimeter
G1 X184.408 Y60.615 E0.01895 ; perimeter
G1 X184.155 Y60.791 E0.01271 ; perimeter
G1 X168.261 Y74.121 E0.85456 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X150.602 Y81.434 E0.15683 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.145 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X150.145 Y77.250 E0.18868 ; perimeter
G1 X152.945 Y77.250 E0.11535 ; perimeter
G1 X152.945 Y80.502 E0.13397 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X183.456 Y60.154 E0.83539 ; perimeter
M73 P59 R55
G1 X183.910 Y59.818 E0.02329 ; perimeter
G1 X184.373 Y59.552 E0.02198 ; perimeter
G1 X184.862 Y59.344 E0.02189 ; perimeter
G1 X185.360 Y59.201 E0.02132 ; perimeter
G1 X185.855 Y59.126 E0.02064 ; perimeter
G1 X186.394 Y59.120 E0.02221 ; perimeter
G1 X186.865 Y59.186 E0.01957 ; perimeter
G1 X187.239 Y59.295 E0.01608 ; perimeter
G1 X187.702 Y59.511 E0.02103 ; perimeter
G1 X188.053 Y59.759 E0.01773 ; perimeter
G1 X188.374 Y60.083 E0.01876 ; perimeter
G1 X187.241 Y61.033 E0.06089 ; perimeter
G1 X187.146 Y60.941 E0.00544 ; perimeter
G1 X186.839 Y60.751 E0.01489 ; perimeter
G1 X186.495 Y60.623 E0.01513 ; perimeter
G1 X186.125 Y60.561 E0.01546 ; perimeter
G1 X185.740 Y60.566 E0.01584 ; perimeter
G1 X185.353 Y60.635 E0.01621 ; perimeter
G1 X184.974 Y60.766 E0.01654 ; perimeter
G1 X184.615 Y60.954 E0.01669 ; perimeter
G1 X184.397 Y61.106 E0.01095 ; perimeter
G1 X168.405 Y74.517 E0.85977 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X150.205 Y81.830 E0.17910 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.284 Y81.455 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.162 Y78.539 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X151.968 Y80.922 ; move to first infill point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7959.07
G1 X151.254 Y80.208 E0.04747 ; infill
G1 X151.254 Y79.569 E0.03007 ; infill
G1 X151.837 Y80.151 E0.03873 ; infill
G1 X151.837 Y79.512 E0.03007 ; infill
G1 X151.254 Y78.929 E0.03873 ; infill
G1 X151.254 Y78.359 E0.02681 ; infill
G1 X151.323 Y78.359 E0.00326 ; infill
G1 X152.038 Y79.073 E0.04748 ; infill
G1 F8640
G1 X151.323 Y78.359 E-0.23318 ; wipe and retract
G1 X151.254 Y78.359 E-0.01602 ; wipe and retract
G1 X151.254 Y78.929 E-0.13168 ; wipe and retract
G1 X151.837 Y79.512 E-0.19024 ; wipe and retract
G1 X151.837 Y80.151 E-0.14770 ; wipe and retract
G1 X151.711 Y80.025 E-0.04117 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X192.194 Y71.612 ; move to first perimeter point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X191.850 Y71.202 E0.02205 ; perimeter
G1 X194.474 Y69.000 E0.14110 ; perimeter
G1 X191.063 Y64.935 E0.21861 ; perimeter
G1 X188.439 Y67.137 E0.14110 ; perimeter
G1 X188.095 Y66.727 E0.02205 ; perimeter
G1 X190.719 Y64.525 E0.14110 ; perimeter
G1 X188.270 Y61.606 E0.15696 ; perimeter
G1 X188.777 Y61.181 E0.02729 ; perimeter
G1 X197.775 Y71.903 E0.57663 ; perimeter
G1 X197.267 Y72.329 E0.02729 ; perimeter
G1 X194.818 Y69.410 E0.15696 ; perimeter
G1 X192.240 Y71.573 E0.13863 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.145 Y72.170 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X191.292 Y71.153 E0.05471 ; perimeter
G1 X193.915 Y68.951 E0.14110 ; perimeter
G1 X191.014 Y65.494 E0.18596 ; perimeter
G1 X188.390 Y67.695 E0.14110 ; perimeter
G1 X187.536 Y66.678 E0.05471 ; perimeter
G1 X190.160 Y64.476 E0.14110 ; perimeter
G1 X187.711 Y61.558 E0.15696 ; perimeter
G1 X188.826 Y60.622 E0.05995 ; perimeter
G1 X198.333 Y71.952 E0.60929 ; perimeter
G1 X197.218 Y72.887 E0.05995 ; perimeter
G1 X194.769 Y69.969 E0.15696 ; perimeter
G1 X192.191 Y72.132 E0.13863 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.187 Y71.773 F10800.000 ; move inwards before travel
G1 F8640
G1 X191.292 Y71.153 E-0.30695 ; wipe and retract
G1 X192.795 Y69.892 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X147.892 Y100.738 ; move to first perimeter point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X147.893 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E0.98935 ; perimeter
G1 X198.393 Y77.980 E1.42424 ; perimeter
G1 X198.713 Y77.670 E0.01834 ; perimeter
G1 X198.997 Y77.301 E0.01918 ; perimeter
G1 X199.221 Y76.898 E0.01903 ; perimeter
G1 X199.379 Y76.469 E0.01884 ; perimeter
G1 X199.463 Y76.024 E0.01864 ; perimeter
G1 X199.467 Y75.575 E0.01847 ; perimeter
G1 X199.387 Y75.138 E0.01834 ; perimeter
G1 X199.224 Y74.732 E0.01801 ; perimeter
G1 X199.052 Y74.464 E0.01311 ; perimeter
G1 X198.228 Y73.477 E0.05299 ; perimeter
G1 X198.737 Y73.050 E0.02737 ; perimeter
G1 X199.626 Y74.110 E0.05701 ; perimeter
G1 X199.844 Y74.420 E0.01564 ; perimeter
G1 X200.023 Y74.817 E0.01793 ; perimeter
G1 X200.106 Y75.117 E0.01283 ; perimeter
G1 X200.152 Y75.509 E0.01626 ; perimeter
G1 X200.132 Y75.977 E0.01929 ; perimeter
G1 X200.050 Y76.397 E0.01764 ; perimeter
G1 X199.906 Y76.824 E0.01854 ; perimeter
G1 X199.701 Y77.244 E0.01928 ; perimeter
G1 X199.438 Y77.648 E0.01985 ; perimeter
G1 X199.119 Y78.030 E0.02048 ; perimeter
G1 X198.741 Y78.387 E0.02145 ; perimeter
G1 X172.104 Y100.738 E1.43244 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X147.952 Y100.738 E0.71667 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.495 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X147.498 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E0.99971 ; perimeter
G1 X198.127 Y77.685 E1.41771 ; perimeter
G1 X198.416 Y77.406 E0.01657 ; perimeter
G1 X198.665 Y77.083 E0.01678 ; perimeter
G1 X198.860 Y76.732 E0.01654 ; perimeter
G1 X198.996 Y76.363 E0.01621 ; perimeter
G1 X199.067 Y75.985 E0.01584 ; perimeter
G1 X199.070 Y75.610 E0.01546 ; perimeter
G1 X199.004 Y75.248 E0.01513 ; perimeter
G1 X198.870 Y74.915 E0.01480 ; perimeter
G1 X198.732 Y74.700 E0.01055 ; perimeter
G1 X197.670 Y73.427 E0.06827 ; perimeter
G1 X198.785 Y72.491 E0.05998 ; perimeter
G1 X199.941 Y73.868 E0.07404 ; perimeter
G1 X200.190 Y74.223 E0.01788 ; perimeter
G1 X200.397 Y74.682 E0.02073 ; perimeter
G1 X200.497 Y75.041 E0.01534 ; perimeter
G1 X200.550 Y75.495 E0.01883 ; perimeter
G1 X200.526 Y76.024 E0.02181 ; perimeter
G1 X200.434 Y76.499 E0.01995 ; perimeter
G1 X200.273 Y76.975 E0.02068 ; perimeter
G1 X200.046 Y77.440 E0.02132 ; perimeter
G1 X199.757 Y77.884 E0.02183 ; perimeter
G1 X199.408 Y78.302 E0.02242 ; perimeter
G1 X199.004 Y78.683 E0.02289 ; perimeter
G1 X172.248 Y101.134 E1.43886 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X147.555 Y101.134 E0.71670 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.704 Y100.793 F10800.000 ; move inwards before travel
G1 F8640
G1 X147.498 Y99.806 E-0.30693 ; wipe and retract
G1 X149.460 Y99.806 E-0.45307 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X165.860 Y101.722 ; move to first infill point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.069 Y101.931 E0.01484 ; infill
G1 X166.754 Y101.931 E0.03448 ; infill
G1 X166.061 Y101.238 E0.04930 ; infill
G1 X166.061 Y100.915 E0.01627 ; infill
G1 X166.423 Y100.915 E0.01821 ; infill
G1 X167.439 Y101.931 E0.07230 ; infill
G1 X168.124 Y101.931 E0.03448 ; infill
G1 X167.108 Y100.915 E0.07230 ; infill
G1 X167.793 Y100.915 E0.03448 ; infill
G1 X168.808 Y101.931 E0.07230 ; infill
G1 X169.493 Y101.931 E0.03448 ; infill
G1 X168.478 Y100.915 E0.07230 ; infill
G1 X169.163 Y100.915 E0.03448 ; infill
G1 X169.945 Y101.697 E0.05567 ; infill
G1 F8640
G1 X169.163 Y100.915 E-0.25535 ; wipe and retract
G1 X168.478 Y100.915 E-0.15815 ; wipe and retract
G1 X169.493 Y101.931 E-0.33164 ; wipe and retract
G1 X169.429 Y101.931 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X101.823 Y138.884 ; move to first perimeter point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.71914 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X50.974 Y116.533 E1.43244 ; perimeter
G1 X50.596 Y116.176 E0.02145 ; perimeter
G1 X50.278 Y115.795 E0.02043 ; perimeter
G1 X50.014 Y115.390 E0.01991 ; perimeter
G1 X49.809 Y114.970 E0.01928 ; perimeter
G1 X49.665 Y114.543 E0.01854 ; perimeter
G1 X49.583 Y114.121 E0.01774 ; perimeter
G1 X49.562 Y113.713 E0.01682 ; perimeter
G1 X49.609 Y113.262 E0.01870 ; perimeter
G1 X49.711 Y112.901 E0.01542 ; perimeter
G1 X49.867 Y112.571 E0.01505 ; perimeter
G1 X50.089 Y112.256 E0.01587 ; perimeter
G1 X50.978 Y111.196 E0.05701 ; perimeter
G1 X51.486 Y111.622 E0.02729 ; perimeter
G1 X50.721 Y112.533 E0.04901 ; perimeter
G1 X50.493 Y112.873 E0.01685 ; perimeter
G1 X50.328 Y113.284 E0.01826 ; perimeter
G1 X50.248 Y113.722 E0.01834 ; perimeter
G1 X50.252 Y114.170 E0.01847 ; perimeter
G1 X50.336 Y114.615 E0.01864 ; perimeter
G1 X50.493 Y115.044 E0.01884 ; perimeter
G1 X50.718 Y115.448 E0.01903 ; perimeter
G1 X51.002 Y115.816 E0.01917 ; perimeter
G1 X51.322 Y116.126 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.42424 ; perimeter
G1 X101.822 Y138.349 E0.98936 ; perimeter
G1 X101.823 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.220 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.71917 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03671 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X50.711 Y116.829 E1.43886 ; perimeter
G1 X50.307 Y116.448 E0.02289 ; perimeter
G1 X49.958 Y116.031 E0.02237 ; perimeter
G1 X49.669 Y115.586 E0.02189 ; perimeter
G1 X49.442 Y115.121 E0.02132 ; perimeter
G1 X49.281 Y114.645 E0.02068 ; perimeter
G1 X49.188 Y114.169 E0.01998 ; perimeter
G1 X49.164 Y113.702 E0.01925 ; perimeter
G1 X49.219 Y113.186 E0.02138 ; perimeter
G1 X49.339 Y112.762 E0.01818 ; perimeter
G1 X49.523 Y112.371 E0.01780 ; perimeter
G1 X49.774 Y112.014 E0.01797 ; perimeter
G1 X50.929 Y110.637 E0.07404 ; perimeter
G1 X52.044 Y111.573 E0.05995 ; perimeter
G1 X51.038 Y112.772 E0.06447 ; perimeter
G1 X50.845 Y113.059 E0.01426 ; perimeter
G1 X50.710 Y113.394 E0.01489 ; perimeter
G1 X50.644 Y113.756 E0.01513 ; perimeter
G1 X50.648 Y114.131 E0.01546 ; perimeter
G1 X50.719 Y114.509 E0.01584 ; perimeter
G1 X50.855 Y114.878 E0.01621 ; perimeter
G1 X51.050 Y115.229 E0.01654 ; perimeter
G1 X51.299 Y115.552 E0.01678 ; perimeter
G1 X51.587 Y115.832 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.41771 ; perimeter
G1 X102.217 Y137.952 E0.99971 ; perimeter
G1 X102.220 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.820 Y139.273 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.928 Y139.232 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X83.854 Y139.843 ; move to first infill point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.072 Y139.061 E0.05567 ; infill
G1 X82.388 Y139.061 E0.03448 ; infill
G1 X83.403 Y140.077 E0.07230 ; infill
G1 X82.718 Y140.077 E0.03448 ; infill
G1 X81.703 Y139.061 E0.07230 ; infill
G1 X81.018 Y139.061 E0.03448 ; infill
G1 X82.033 Y140.077 E0.07230 ; infill
G1 X81.348 Y140.077 E0.03448 ; infill
G1 X80.333 Y139.061 E0.07230 ; infill
G1 X79.971 Y139.061 E0.01821 ; infill
G1 X79.971 Y139.384 E0.01627 ; infill
G1 X80.663 Y140.077 E0.04930 ; infill
G1 X79.978 Y140.077 E0.03448 ; infill
G1 X79.770 Y139.868 E0.01483 ; infill
G1 F8640
G1 X79.978 Y140.077 E-0.06804 ; wipe and retract
G1 X80.663 Y140.077 E-0.15815 ; wipe and retract
G1 X79.971 Y139.384 E-0.22612 ; wipe and retract
G1 X79.971 Y139.061 E-0.07462 ; wipe and retract
G1 X80.333 Y139.061 E-0.08353 ; wipe and retract
G1 X80.791 Y139.519 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X57.521 Y109.758 ; move to first perimeter point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X54.897 Y107.557 E0.14110 ; perimeter
G1 X52.448 Y110.475 E0.15696 ; perimeter
G1 X51.940 Y110.049 E0.02729 ; perimeter
G1 X60.938 Y99.327 E0.57663 ; perimeter
G1 X61.445 Y99.753 E0.02729 ; perimeter
G1 X58.996 Y102.671 E0.15696 ; perimeter
G1 X61.620 Y104.873 E0.14110 ; perimeter
G1 X61.276 Y105.283 E0.02205 ; perimeter
G1 X58.652 Y103.081 E0.14110 ; perimeter
G1 X55.241 Y107.146 E0.21861 ; perimeter
G1 X57.865 Y109.348 E0.14110 ; perimeter
G1 X57.559 Y109.712 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.570 Y110.317 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X54.946 Y108.115 E0.14110 ; perimeter
G1 X52.497 Y111.034 E0.15696 ; perimeter
G1 X51.382 Y110.098 E0.05995 ; perimeter
G1 X60.889 Y98.768 E0.60929 ; perimeter
G1 X62.004 Y99.704 E0.05995 ; perimeter
G1 X59.555 Y102.622 E0.15696 ; perimeter
G1 X62.178 Y104.824 E0.14110 ; perimeter
G1 X61.325 Y105.841 E0.05471 ; perimeter
G1 X58.701 Y103.640 E0.14110 ; perimeter
G1 X55.799 Y107.098 E0.18596 ; perimeter
G1 X58.423 Y109.299 E0.14110 ; perimeter
G1 X57.608 Y110.271 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.297 Y110.024 F10800.000 ; move inwards before travel
G1 F8640
G1 X55.050 Y108.199 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X98.777 Y119.184 ; move to first perimeter point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.05004 ; perimeter
G1 X97.562 Y116.189 E0.12337 ; perimeter
G1 X98.777 Y116.189 E0.05004 ; perimeter
G1 X98.777 Y119.124 E0.12090 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.173 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.15930 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X65.672 Y99.024 E0.84871 ; perimeter
G1 X65.311 Y98.763 E0.01834 ; perimeter
G1 X64.899 Y98.548 E0.01917 ; perimeter
G1 X64.462 Y98.396 E0.01903 ; perimeter
G1 X64.012 Y98.316 E0.01884 ; perimeter
G1 X63.560 Y98.310 E0.01864 ; perimeter
G1 X63.117 Y98.384 E0.01847 ; perimeter
G1 X62.700 Y98.539 E0.01834 ; perimeter
G1 X62.486 Y98.672 E0.01039 ; perimeter
G1 X61.927 Y98.203 E0.03006 ; perimeter
G1 X62.216 Y97.998 E0.01461 ; perimeter
G1 X62.553 Y97.835 E0.01542 ; perimeter
G1 X62.992 Y97.709 E0.01881 ; perimeter
G1 X63.346 Y97.662 E0.01468 ; perimeter
G1 X63.785 Y97.665 E0.01811 ; perimeter
G1 X64.272 Y97.736 E0.02027 ; perimeter
G1 X64.720 Y97.865 E0.01920 ; perimeter
G1 X65.165 Y98.054 E0.01991 ; perimeter
G1 X65.587 Y98.296 E0.02005 ; perimeter
G1 X66.013 Y98.612 E0.02184 ; perimeter
G1 X81.649 Y111.732 E0.84085 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y115.793 E0.13397 ; perimeter
G1 X99.173 Y115.793 E0.08269 ; perimeter
G1 X99.173 Y119.520 E0.15355 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.569 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.18157 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X65.428 Y99.337 E0.85407 ; perimeter
G1 X65.102 Y99.101 E0.01657 ; perimeter
G1 X64.741 Y98.912 E0.01678 ; perimeter
G1 X64.362 Y98.781 E0.01654 ; perimeter
G1 X63.975 Y98.712 E0.01621 ; perimeter
G1 X63.590 Y98.707 E0.01584 ; perimeter
G1 X63.220 Y98.769 E0.01546 ; perimeter
G1 X62.875 Y98.897 E0.01513 ; perimeter
G1 X62.569 Y99.088 E0.01489 ; perimeter
G1 X62.473 Y99.179 E0.00544 ; perimeter
G1 X61.341 Y98.229 E0.06089 ; perimeter
G1 X61.662 Y97.905 E0.01876 ; perimeter
G1 X62.014 Y97.656 E0.01780 ; perimeter
G1 X62.411 Y97.464 E0.01818 ; perimeter
G1 X62.911 Y97.320 E0.02142 ; perimeter
G1 X63.321 Y97.266 E0.01701 ; perimeter
G1 X63.815 Y97.269 E0.02038 ; perimeter
G1 X64.356 Y97.348 E0.02251 ; perimeter
G1 X64.853 Y97.490 E0.02129 ; perimeter
G1 X65.342 Y97.698 E0.02189 ; perimeter
G1 X65.804 Y97.964 E0.02198 ; perimeter
G1 X66.258 Y98.300 E0.02329 ; perimeter
G1 X81.793 Y111.335 E0.83539 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y115.396 E0.13397 ; perimeter
G1 X99.569 Y115.396 E0.11535 ; perimeter
G1 X99.569 Y119.916 E0.18621 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.192 Y119.843 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.278 Y119.961 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X98.592 Y119.069 ; move to first infill point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7959.06
G1 X97.878 Y118.355 E0.04747 ; infill
G1 X97.878 Y117.715 E0.03007 ; infill
G1 X98.461 Y118.298 E0.03873 ; infill
G1 X98.461 Y117.658 E0.03007 ; infill
G1 X97.878 Y117.075 E0.03873 ; infill
G1 X97.878 Y116.505 E0.02681 ; infill
G1 X97.948 Y116.505 E0.00326 ; infill
G1 X98.662 Y117.219 E0.04748 ; infill
G1 F8640
G1 X97.948 Y116.505 E-0.23318 ; wipe and retract
G1 X97.878 Y116.505 E-0.01602 ; wipe and retract
G1 X97.878 Y117.075 E-0.13168 ; wipe and retract
G1 X98.461 Y117.658 E-0.19025 ; wipe and retract
G1 X98.461 Y118.298 E-0.14770 ; wipe and retract
G1 X98.335 Y118.171 E-0.04117 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.503 Y124.847 E0.15060 ; perimeter
G1 X75.847 Y124.437 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.15060 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.524 Y116.480 E0.15060 ; perimeter
G1 X82.868 Y116.070 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.15060 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X74.945 Y124.896 E0.15060 ; perimeter
G1 X75.798 Y123.879 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.15060 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X81.965 Y116.529 E0.15060 ; perimeter
G1 X82.819 Y115.512 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.15060 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.562 Y116.070 E0.15060 ; perimeter
G1 X166.906 Y116.480 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.15060 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.583 Y124.437 E0.15060 ; perimeter
G1 X173.927 Y124.847 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.15060 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.611 Y115.512 E0.15060 ; perimeter
G1 X167.464 Y116.529 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.15060 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.631 Y123.879 E0.15060 ; perimeter
G1 X174.485 Y124.896 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.15060 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X150.653 Y119.184 ; move to first perimeter point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.653 Y116.189 E0.12337 ; perimeter
G1 X151.868 Y116.189 E0.05004 ; perimeter
G1 X151.868 Y119.184 E0.12337 ; perimeter
G1 X150.713 Y119.184 E0.04756 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.257 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.257 Y115.793 E0.15603 ; perimeter
G1 X152.264 Y115.793 E0.08269 ; perimeter
G1 X152.264 Y119.045 E0.13397 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X183.417 Y98.612 E0.84085 ; perimeter
G1 X183.843 Y98.296 E0.02184 ; perimeter
G1 X184.265 Y98.054 E0.02005 ; perimeter
G1 X184.709 Y97.865 E0.01991 ; perimeter
G1 X185.159 Y97.736 E0.01928 ; perimeter
G1 X185.602 Y97.668 E0.01845 ; perimeter
G1 X186.083 Y97.663 E0.01984 ; perimeter
G1 X186.496 Y97.720 E0.01716 ; perimeter
G1 X186.814 Y97.813 E0.01365 ; perimeter
G1 X187.217 Y98.001 E0.01831 ; perimeter
G1 X187.503 Y98.203 E0.01442 ; perimeter
G1 X186.944 Y98.672 E0.03006 ; perimeter
G1 X186.730 Y98.539 E0.01039 ; perimeter
G1 X186.312 Y98.384 E0.01834 ; perimeter
G1 X185.870 Y98.310 E0.01847 ; perimeter
G1 X185.418 Y98.316 E0.01864 ; perimeter
G1 X184.967 Y98.396 E0.01884 ; perimeter
G1 X184.531 Y98.548 E0.01903 ; perimeter
G1 X184.123 Y98.761 E0.01895 ; perimeter
G1 X183.870 Y98.937 E0.01271 ; perimeter
G1 X167.976 Y112.267 E0.85456 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X150.317 Y119.580 E0.15683 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.860 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.860 Y115.396 E0.18868 ; perimeter
G1 X152.660 Y115.396 E0.11535 ; perimeter
G1 X152.660 Y118.648 E0.13397 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X183.171 Y98.300 E0.83539 ; perimeter
G1 X183.625 Y97.964 E0.02329 ; perimeter
G1 X184.088 Y97.698 E0.02198 ; perimeter
G1 X184.577 Y97.490 E0.02189 ; perimeter
G1 X185.074 Y97.348 E0.02132 ; perimeter
G1 X185.570 Y97.272 E0.02064 ; perimeter
G1 X186.109 Y97.266 E0.02221 ; perimeter
G1 X186.579 Y97.332 E0.01957 ; perimeter
G1 X186.954 Y97.441 E0.01608 ; perimeter
G1 X187.417 Y97.657 E0.02103 ; perimeter
G1 X187.768 Y97.905 E0.01773 ; perimeter
G1 X188.088 Y98.229 E0.01876 ; perimeter
G1 X186.956 Y99.179 E0.06089 ; perimeter
G1 X186.861 Y99.088 E0.00544 ; perimeter
G1 X186.554 Y98.897 E0.01489 ; perimeter
G1 X186.210 Y98.769 E0.01513 ; perimeter
G1 X185.840 Y98.707 E0.01546 ; perimeter
G1 X185.455 Y98.712 E0.01584 ; perimeter
G1 X185.068 Y98.781 E0.01621 ; perimeter
G1 X184.688 Y98.912 E0.01654 ; perimeter
G1 X184.329 Y99.100 E0.01669 ; perimeter
G1 X184.111 Y99.252 E0.01095 ; perimeter
G1 X168.120 Y112.663 E0.85977 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X149.920 Y119.976 E0.17910 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.999 Y119.601 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.877 Y116.685 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X151.683 Y119.069 ; move to first infill point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7959.07
G1 X150.969 Y118.355 E0.04747 ; infill
G1 X150.969 Y117.715 E0.03007 ; infill
G1 X151.552 Y118.298 E0.03873 ; infill
G1 X151.552 Y117.658 E0.03007 ; infill
G1 X150.969 Y117.075 E0.03873 ; infill
G1 X150.969 Y116.505 E0.02681 ; infill
G1 X151.038 Y116.505 E0.00326 ; infill
G1 X151.752 Y117.219 E0.04748 ; infill
G1 F8640
G1 X151.038 Y116.505 E-0.23318 ; wipe and retract
G1 X150.969 Y116.505 E-0.01602 ; wipe and retract
G1 X150.969 Y117.075 E-0.13168 ; wipe and retract
G1 X151.552 Y117.658 E-0.19024 ; wipe and retract
G1 X151.552 Y118.298 E-0.14770 ; wipe and retract
G1 X151.425 Y118.171 E-0.04117 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X191.909 Y109.758 ; move to first perimeter point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X191.565 Y109.348 E0.02205 ; perimeter
G1 X194.189 Y107.146 E0.14110 ; perimeter
G1 X190.778 Y103.081 E0.21861 ; perimeter
G1 X188.154 Y105.283 E0.14110 ; perimeter
G1 X187.810 Y104.873 E0.02205 ; perimeter
G1 X190.434 Y102.671 E0.14110 ; perimeter
G1 X187.984 Y99.753 E0.15696 ; perimeter
G1 X188.492 Y99.327 E0.02729 ; perimeter
G1 X197.489 Y110.049 E0.57663 ; perimeter
G1 X196.982 Y110.475 E0.02729 ; perimeter
G1 X194.533 Y107.557 E0.15696 ; perimeter
G1 X191.955 Y109.720 E0.13863 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.860 Y110.317 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X191.006 Y109.299 E0.05471 ; perimeter
G1 X193.630 Y107.098 E0.14110 ; perimeter
G1 X190.729 Y103.640 E0.18596 ; perimeter
G1 X188.105 Y105.841 E0.14110 ; perimeter
G1 X187.251 Y104.824 E0.05471 ; perimeter
G1 X189.875 Y102.622 E0.14110 ; perimeter
G1 X187.426 Y99.704 E0.15696 ; perimeter
G1 X188.541 Y98.768 E0.05995 ; perimeter
G1 X198.048 Y110.098 E0.60929 ; perimeter
M73 Q59 S56
G1 X196.933 Y111.034 E0.05995 ; perimeter
G1 X194.484 Y108.115 E0.15696 ; perimeter
G1 X191.906 Y110.278 E0.13863 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.902 Y109.919 F10800.000 ; move inwards before travel
G1 F8640
G1 X191.006 Y109.299 E-0.30695 ; wipe and retract
G1 X192.509 Y108.038 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X147.607 Y138.884 ; move to first perimeter point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X147.608 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E0.98935 ; perimeter
G1 X198.108 Y116.126 E1.42424 ; perimeter
G1 X198.428 Y115.816 E0.01834 ; perimeter
G1 X198.712 Y115.448 E0.01918 ; perimeter
G1 X198.936 Y115.044 E0.01903 ; perimeter
G1 X199.094 Y114.615 E0.01884 ; perimeter
G1 X199.178 Y114.170 E0.01864 ; perimeter
G1 X199.182 Y113.722 E0.01847 ; perimeter
G1 X199.102 Y113.284 E0.01834 ; perimeter
G1 X198.939 Y112.878 E0.01801 ; perimeter
G1 X198.766 Y112.611 E0.01311 ; perimeter
G1 X197.942 Y111.623 E0.05299 ; perimeter
G1 X198.451 Y111.196 E0.02737 ; perimeter
G1 X199.341 Y112.256 E0.05701 ; perimeter
G1 X199.559 Y112.567 E0.01564 ; perimeter
G1 X199.738 Y112.963 E0.01793 ; perimeter
G1 X199.821 Y113.263 E0.01283 ; perimeter
G1 X199.867 Y113.655 E0.01626 ; perimeter
G1 X199.847 Y114.123 E0.01929 ; perimeter
G1 X199.765 Y114.543 E0.01764 ; perimeter
G1 X199.620 Y114.970 E0.01854 ; perimeter
G1 X199.415 Y115.390 E0.01928 ; perimeter
G1 X199.153 Y115.794 E0.01985 ; perimeter
G1 X198.834 Y116.176 E0.02048 ; perimeter
G1 X198.455 Y116.533 E0.02145 ; perimeter
G1 X171.819 Y138.884 E1.43244 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X147.667 Y138.884 E0.71667 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.210 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X147.212 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E0.99971 ; perimeter
G1 X197.842 Y115.832 E1.41771 ; perimeter
G1 X198.131 Y115.552 E0.01657 ; perimeter
G1 X198.380 Y115.229 E0.01678 ; perimeter
G1 X198.575 Y114.878 E0.01654 ; perimeter
G1 X198.711 Y114.509 E0.01621 ; perimeter
G1 X198.782 Y114.131 E0.01584 ; perimeter
G1 X198.785 Y113.756 E0.01546 ; perimeter
G1 X198.719 Y113.394 E0.01513 ; perimeter
G1 X198.585 Y113.061 E0.01480 ; perimeter
G1 X198.447 Y112.846 E0.01055 ; perimeter
G1 X197.385 Y111.573 E0.06827 ; perimeter
G1 X198.500 Y110.637 E0.05998 ; perimeter
G1 X199.656 Y112.014 E0.07404 ; perimeter
G1 X199.905 Y112.369 E0.01788 ; perimeter
G1 X200.112 Y112.828 E0.02073 ; perimeter
G1 X200.211 Y113.187 E0.01534 ; perimeter
G1 X200.264 Y113.641 E0.01883 ; perimeter
G1 X200.241 Y114.170 E0.02181 ; perimeter
G1 X200.149 Y114.645 E0.01995 ; perimeter
G1 X199.988 Y115.121 E0.02068 ; perimeter
G1 X199.761 Y115.586 E0.02132 ; perimeter
G1 X199.472 Y116.030 E0.02183 ; perimeter
G1 X199.123 Y116.448 E0.02242 ; perimeter
G1 X198.719 Y116.829 E0.02289 ; perimeter
G1 X171.963 Y139.280 E1.43886 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X147.270 Y139.280 E0.71670 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.419 Y138.939 F10800.000 ; move inwards before travel
G1 F8640
G1 X147.212 Y137.952 E-0.30693 ; wipe and retract
G1 X149.175 Y137.952 E-0.45307 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
G1 X165.575 Y139.868 ; move to first infill point
G1 Z12.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.784 Y140.077 E0.01484 ; infill
G1 X166.469 Y140.077 E0.03448 ; infill
G1 X165.776 Y139.384 E0.04930 ; infill
G1 X165.776 Y139.061 E0.01627 ; infill
G1 X166.138 Y139.061 E0.01821 ; infill
G1 X167.153 Y140.077 E0.07230 ; infill
G1 X167.838 Y140.077 E0.03448 ; infill
G1 X166.823 Y139.061 E0.07230 ; infill
G1 X167.508 Y139.061 E0.03448 ; infill
G1 X168.523 Y140.077 E0.07230 ; infill
G1 X169.208 Y140.077 E0.03448 ; infill
G1 X168.193 Y139.061 E0.07230 ; infill
G1 X168.878 Y139.061 E0.03448 ; infill
G1 X169.660 Y139.843 E0.05567 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;13


G1 F8640
G1 X168.878 Y139.061 E-0.25535 ; wipe and retract
G1 X168.193 Y139.061 E-0.15815 ; wipe and retract
G1 X169.208 Y140.077 E-0.33164 ; wipe and retract
G1 X169.144 Y140.077 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;13
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X101.749 Y100.738 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.70438 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X51.125 Y78.275 E1.43965 ; perimeter
G1 X50.747 Y77.918 E0.02142 ; perimeter
G1 X50.431 Y77.539 E0.02034 ; perimeter
G1 X50.167 Y77.135 E0.01986 ; perimeter
G1 X49.962 Y76.716 E0.01923 ; perimeter
G1 X49.819 Y76.293 E0.01838 ; perimeter
G1 X49.728 Y75.807 E0.02038 ; perimeter
G1 X49.714 Y75.395 E0.01699 ; perimeter
G1 X49.760 Y75.003 E0.01624 ; perimeter
G1 X49.863 Y74.641 E0.01553 ; perimeter
G1 X50.019 Y74.312 E0.01500 ; perimeter
G1 X50.240 Y73.997 E0.01583 ; perimeter
G1 X51.129 Y72.937 E0.05701 ; perimeter
G1 X51.637 Y73.363 E0.02729 ; perimeter
G1 X50.872 Y74.274 E0.04901 ; perimeter
G1 X50.644 Y74.614 E0.01685 ; perimeter
G1 X50.479 Y75.025 E0.01826 ; perimeter
G1 X50.399 Y75.463 E0.01834 ; perimeter
G1 X50.403 Y75.911 E0.01847 ; perimeter
G1 X50.487 Y76.356 E0.01864 ; perimeter
G1 X50.644 Y76.785 E0.01884 ; perimeter
G1 X50.869 Y77.189 E0.01903 ; perimeter
G1 X51.153 Y77.558 E0.01917 ; perimeter
G1 X51.473 Y77.867 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.43145 ; perimeter
M73 P59 R54
G1 X101.746 Y100.203 E0.97451 ; perimeter
G1 X101.749 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X102.148 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.70446 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03671 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X50.862 Y78.571 E1.44607 ; perimeter
G1 X50.458 Y78.190 E0.02286 ; perimeter
G1 X50.111 Y77.775 E0.02228 ; perimeter
G1 X49.822 Y77.331 E0.02183 ; perimeter
G1 X49.595 Y76.867 E0.02127 ; perimeter
G1 X49.434 Y76.394 E0.02059 ; perimeter
G1 X49.332 Y75.851 E0.02278 ; perimeter
G1 X49.316 Y75.378 E0.01947 ; perimeter
G1 X49.370 Y74.925 E0.01879 ; perimeter
G1 X49.491 Y74.501 E0.01818 ; perimeter
G1 X49.675 Y74.112 E0.01775 ; perimeter
G1 X49.925 Y73.756 E0.01792 ; perimeter
G1 X51.080 Y72.379 E0.07404 ; perimeter
G1 X52.195 Y73.314 E0.05995 ; perimeter
G1 X51.189 Y74.513 E0.06447 ; perimeter
G1 X50.996 Y74.800 E0.01426 ; perimeter
G1 X50.862 Y75.136 E0.01489 ; perimeter
G1 X50.796 Y75.497 E0.01513 ; perimeter
G1 X50.799 Y75.872 E0.01546 ; perimeter
G1 X50.870 Y76.250 E0.01584 ; perimeter
G1 X51.006 Y76.620 E0.01621 ; perimeter
G1 X51.201 Y76.970 E0.01654 ; perimeter
G1 X51.450 Y77.293 E0.01678 ; perimeter
G1 X51.738 Y77.573 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.42492 ; perimeter
G1 X102.141 Y99.806 E0.98480 ; perimeter
G1 X102.148 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.748 Y101.127 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.856 Y101.086 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X83.730 Y102.131 ; move to first infill point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.939 Y101.923 E0.01484 ; infill
G1 X83.939 Y101.238 E0.03448 ; infill
G1 X83.246 Y101.931 E0.04931 ; infill
G1 X82.561 Y101.931 E0.03448 ; infill
G1 X83.577 Y100.915 E0.07230 ; infill
G1 X82.892 Y100.915 E0.03448 ; infill
G1 X81.876 Y101.931 E0.07230 ; infill
G1 X81.191 Y101.931 E0.03448 ; infill
G1 X82.207 Y100.915 E0.07230 ; infill
G1 X81.522 Y100.915 E0.03448 ; infill
G1 X80.506 Y101.931 E0.07230 ; infill
G1 X80.256 Y101.931 E0.01260 ; infill
G1 X80.256 Y101.496 E0.02188 ; infill
G1 X81.038 Y100.714 E0.05566 ; infill
G1 F8640
G1 X80.256 Y101.496 E-0.25530 ; wipe and retract
G1 X80.256 Y101.931 E-0.10036 ; wipe and retract
G1 X80.506 Y101.931 E-0.05779 ; wipe and retract
G1 X81.522 Y100.915 E-0.33164 ; wipe and retract
G1 X81.587 Y100.915 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X57.667 Y71.495 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X55.048 Y69.298 E0.14083 ; perimeter
G1 X52.599 Y72.216 E0.15696 ; perimeter
G1 X52.091 Y71.791 E0.02729 ; perimeter
G1 X61.089 Y61.068 E0.57663 ; perimeter
G1 X61.596 Y61.494 E0.02729 ; perimeter
G1 X59.147 Y64.413 E0.15696 ; perimeter
G1 X61.766 Y66.610 E0.14083 ; perimeter
G1 X61.422 Y67.020 E0.02205 ; perimeter
G1 X58.803 Y64.823 E0.14083 ; perimeter
G1 X55.392 Y68.888 E0.21861 ; perimeter
G1 X58.011 Y71.085 E0.14083 ; perimeter
G1 X57.705 Y71.449 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.716 Y72.054 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X55.097 Y69.856 E0.14083 ; perimeter
G1 X52.648 Y72.775 E0.15696 ; perimeter
G1 X51.533 Y71.839 E0.05995 ; perimeter
G1 X61.040 Y60.510 E0.60929 ; perimeter
G1 X62.155 Y61.445 E0.05995 ; perimeter
G1 X59.706 Y64.364 E0.15696 ; perimeter
G1 X62.324 Y66.561 E0.14083 ; perimeter
G1 X61.471 Y67.578 E0.05471 ; perimeter
G1 X58.852 Y65.381 E0.14083 ; perimeter
G1 X55.950 Y68.839 E0.18596 ; perimeter
G1 X58.569 Y71.036 E0.14083 ; perimeter
G1 X57.754 Y72.008 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.443 Y71.761 F10800.000 ; move inwards before travel
G1 F8640
G1 X55.196 Y69.937 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X98.987 Y81.038 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.04695 ; perimeter
G1 X97.847 Y77.868 E0.13058 ; perimeter
G1 X98.987 Y77.868 E0.04695 ; perimeter
G1 X98.987 Y80.978 E0.12811 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.15621 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X65.823 Y60.766 E0.85592 ; perimeter
G1 X65.462 Y60.505 E0.01834 ; perimeter
G1 X65.050 Y60.289 E0.01917 ; perimeter
G1 X64.613 Y60.138 E0.01903 ; perimeter
G1 X64.163 Y60.057 E0.01884 ; perimeter
G1 X63.711 Y60.052 E0.01864 ; perimeter
G1 X63.268 Y60.126 E0.01847 ; perimeter
G1 X62.851 Y60.280 E0.01834 ; perimeter
G1 X62.637 Y60.414 E0.01039 ; perimeter
G1 X62.078 Y59.945 E0.03006 ; perimeter
G1 X62.366 Y59.741 E0.01453 ; perimeter
G1 X62.701 Y59.578 E0.01534 ; perimeter
G1 X63.152 Y59.449 E0.01934 ; perimeter
G1 X63.490 Y59.404 E0.01405 ; perimeter
G1 X63.928 Y59.406 E0.01804 ; perimeter
G1 X64.429 Y59.479 E0.02083 ; perimeter
G1 X64.875 Y59.607 E0.01912 ; perimeter
G1 X65.318 Y59.796 E0.01986 ; perimeter
G1 X65.746 Y60.042 E0.02033 ; perimeter
G1 X66.164 Y60.353 E0.02143 ; perimeter
G1 X81.934 Y73.586 E0.84808 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y77.471 E0.14118 ; perimeter
G1 X99.383 Y77.471 E0.07960 ; perimeter
G1 X99.383 Y81.374 E0.16077 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.17848 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X65.579 Y61.078 E0.86128 ; perimeter
G1 X65.253 Y60.843 E0.01657 ; perimeter
G1 X64.892 Y60.654 E0.01678 ; perimeter
G1 X64.513 Y60.522 E0.01654 ; perimeter
G1 X64.126 Y60.453 E0.01621 ; perimeter
G1 X63.741 Y60.448 E0.01584 ; perimeter
G1 X63.371 Y60.510 E0.01546 ; perimeter
G1 X63.026 Y60.638 E0.01513 ; perimeter
G1 X62.720 Y60.829 E0.01489 ; perimeter
G1 X62.625 Y60.920 E0.00544 ; perimeter
G1 X61.492 Y59.970 E0.06089 ; perimeter
G1 X61.812 Y59.648 E0.01871 ; perimeter
G1 X62.163 Y59.398 E0.01775 ; perimeter
G1 X62.559 Y59.206 E0.01812 ; perimeter
G1 X63.071 Y59.060 E0.02196 ; perimeter
G1 X63.465 Y59.008 E0.01635 ; perimeter
G1 X63.958 Y59.010 E0.02031 ; perimeter
G1 X64.513 Y59.091 E0.02310 ; perimeter
G1 X65.008 Y59.233 E0.02123 ; perimeter
G1 X65.496 Y59.441 E0.02183 ; perimeter
G1 X65.964 Y59.710 E0.02226 ; perimeter
G1 X66.409 Y60.042 E0.02287 ; perimeter
G1 X82.078 Y73.189 E0.84261 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y77.075 E0.14118 ; perimeter
G1 X99.780 Y77.075 E0.11226 ; perimeter
G1 X99.780 Y81.770 E0.19342 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.404 Y81.693 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.488 Y81.816 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X97.962 Y80.892 ; move to first infill point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7756.85
G1 X98.671 Y80.183 E0.04833 ; infill
G1 X98.671 Y79.527 E0.03166 ; infill
G1 X98.163 Y80.035 E0.03463 ; infill
G1 X98.163 Y79.378 E0.03166 ; infill
G1 X98.671 Y78.871 E0.03463 ; infill
G1 X98.671 Y78.214 E0.03166 ; infill
G1 X97.962 Y78.923 E0.04833 ; infill
G1 F8640
G1 X98.671 Y78.214 E-0.23134 ; wipe and retract
G1 X98.671 Y78.871 E-0.15155 ; wipe and retract
G1 X98.163 Y79.378 E-0.16575 ; wipe and retract
G1 X98.163 Y80.035 E-0.15155 ; wipe and retract
G1 X98.346 Y79.851 E-0.05980 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.850 Y86.753 E0.14725 ; perimeter
G1 X76.195 Y86.343 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.14725 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.871 Y78.386 E0.14725 ; perimeter
G1 X83.215 Y77.976 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.14725 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.292 Y86.802 E0.14725 ; perimeter
G1 X76.146 Y85.785 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.14725 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.313 Y78.435 E0.14725 ; perimeter
G1 X83.166 Y77.418 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.14725 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.785 Y77.976 E0.14725 ; perimeter
G1 X167.129 Y78.386 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.14725 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.805 Y86.343 E0.14725 ; perimeter
G1 X174.150 Y86.753 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.14725 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X166.834 Y77.418 E0.14725 ; perimeter
G1 X167.687 Y78.435 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.14725 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X173.854 Y85.785 E0.14725 ; perimeter
G1 X174.708 Y86.802 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.14725 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X151.013 Y81.038 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y77.868 E0.13058 ; perimeter
G1 X152.153 Y77.868 E0.04695 ; perimeter
G1 X152.153 Y81.038 E0.13058 ; perimeter
G1 X151.073 Y81.038 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.617 Y77.471 E0.16324 ; perimeter
G1 X152.549 Y77.471 E0.07960 ; perimeter
G1 X152.549 Y80.899 E0.14118 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X183.836 Y60.353 E0.84808 ; perimeter
G1 X184.254 Y60.042 E0.02143 ; perimeter
G1 X184.682 Y59.796 E0.02033 ; perimeter
G1 X185.125 Y59.607 E0.01986 ; perimeter
G1 X185.574 Y59.478 E0.01923 ; perimeter
G1 X186.015 Y59.410 E0.01838 ; perimeter
G1 X186.509 Y59.405 E0.02038 ; perimeter
G1 X186.920 Y59.463 E0.01709 ; perimeter
G1 X187.224 Y59.552 E0.01305 ; perimeter
G1 X187.639 Y59.744 E0.01883 ; perimeter
G1 X187.922 Y59.945 E0.01430 ; perimeter
G1 X187.363 Y60.414 E0.03006 ; perimeter
G1 X187.149 Y60.280 E0.01039 ; perimeter
G1 X186.732 Y60.126 E0.01834 ; perimeter
G1 X186.289 Y60.052 E0.01847 ; perimeter
G1 X185.837 Y60.057 E0.01864 ; perimeter
G1 X185.387 Y60.138 E0.01884 ; perimeter
G1 X184.950 Y60.289 E0.01903 ; perimeter
G1 X184.542 Y60.502 E0.01896 ; perimeter
G1 X184.286 Y60.682 E0.01291 ; perimeter
G1 X168.261 Y74.121 E0.86156 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X150.677 Y81.434 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X150.220 Y77.075 E0.19589 ; perimeter
G1 X152.945 Y77.075 E0.11226 ; perimeter
G1 X152.945 Y80.502 E0.14118 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X183.591 Y60.042 E0.84261 ; perimeter
G1 X184.036 Y59.710 E0.02287 ; perimeter
G1 X184.504 Y59.441 E0.02226 ; perimeter
G1 X184.992 Y59.233 E0.02183 ; perimeter
G1 X185.488 Y59.090 E0.02127 ; perimeter
G1 X185.982 Y59.014 E0.02059 ; perimeter
G1 X186.535 Y59.008 E0.02278 ; perimeter
G1 X187.004 Y59.074 E0.01951 ; perimeter
G1 X187.364 Y59.180 E0.01545 ; perimeter
G1 X187.838 Y59.399 E0.02155 ; perimeter
G1 X188.188 Y59.648 E0.01766 ; perimeter
G1 X188.508 Y59.970 E0.01871 ; perimeter
G1 X187.375 Y60.920 E0.06089 ; perimeter
G1 X187.280 Y60.829 E0.00544 ; perimeter
G1 X186.974 Y60.638 E0.01489 ; perimeter
G1 X186.629 Y60.510 E0.01513 ; perimeter
G1 X186.259 Y60.448 E0.01546 ; perimeter
G1 X185.874 Y60.453 E0.01584 ; perimeter
G1 X185.487 Y60.522 E0.01621 ; perimeter
G1 X185.108 Y60.654 E0.01654 ; perimeter
G1 X184.749 Y60.842 E0.01670 ; perimeter
G1 X184.527 Y60.997 E0.01114 ; perimeter
G1 X168.405 Y74.517 E0.86679 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X150.280 Y81.830 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.359 Y81.455 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.239 Y78.539 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X151.128 Y80.892 ; move to first infill point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7756.87
G1 X151.837 Y80.183 E0.04833 ; infill
G1 X151.837 Y79.527 E0.03166 ; infill
G1 X151.329 Y80.035 E0.03463 ; infill
G1 X151.329 Y79.378 E0.03166 ; infill
G1 X151.837 Y78.871 E0.03463 ; infill
G1 X151.837 Y78.214 E0.03166 ; infill
G1 X151.128 Y78.923 E0.04833 ; infill
G1 F8640
G1 X151.837 Y78.214 E-0.23134 ; wipe and retract
G1 X151.837 Y78.871 E-0.15155 ; wipe and retract
G1 X151.329 Y79.378 E-0.16575 ; wipe and retract
G1 X151.329 Y80.035 E-0.15155 ; wipe and retract
G1 X151.512 Y79.851 E-0.05980 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X192.333 Y71.495 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X191.989 Y71.085 E0.02205 ; perimeter
G1 X194.608 Y68.888 E0.14083 ; perimeter
G1 X191.197 Y64.823 E0.21861 ; perimeter
G1 X188.578 Y67.020 E0.14083 ; perimeter
G1 X188.234 Y66.610 E0.02205 ; perimeter
G1 X190.853 Y64.413 E0.14083 ; perimeter
G1 X188.404 Y61.494 E0.15696 ; perimeter
G1 X188.911 Y61.068 E0.02729 ; perimeter
G1 X197.909 Y71.791 E0.57663 ; perimeter
G1 X197.401 Y72.217 E0.02729 ; perimeter
G1 X194.952 Y69.298 E0.15696 ; perimeter
G1 X192.379 Y71.457 E0.13836 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.284 Y72.054 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X191.431 Y71.036 E0.05471 ; perimeter
G1 X194.050 Y68.839 E0.14083 ; perimeter
G1 X191.148 Y65.381 E0.18596 ; perimeter
G1 X188.529 Y67.578 E0.14083 ; perimeter
G1 X187.676 Y66.561 E0.05471 ; perimeter
G1 X190.294 Y64.364 E0.14083 ; perimeter
G1 X187.845 Y61.445 E0.15696 ; perimeter
G1 X188.960 Y60.510 E0.05995 ; perimeter
G1 X198.467 Y71.839 E0.60929 ; perimeter
G1 X197.352 Y72.775 E0.05995 ; perimeter
G1 X194.903 Y69.856 E0.15696 ; perimeter
G1 X192.330 Y72.015 E0.13836 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.326 Y71.656 F10800.000 ; move inwards before travel
G1 F8640
G1 X191.431 Y71.036 E-0.30695 ; wipe and retract
G1 X192.934 Y69.775 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X148.251 Y100.738 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X148.254 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E0.97451 ; perimeter
G1 X198.527 Y77.867 E1.43145 ; perimeter
G1 X198.847 Y77.558 E0.01834 ; perimeter
G1 X199.131 Y77.189 E0.01918 ; perimeter
G1 X199.356 Y76.785 E0.01903 ; perimeter
G1 X199.513 Y76.356 E0.01884 ; perimeter
G1 X199.597 Y75.911 E0.01864 ; perimeter
G1 X199.601 Y75.463 E0.01847 ; perimeter
G1 X199.521 Y75.025 E0.01834 ; perimeter
G1 X199.358 Y74.619 E0.01802 ; perimeter
G1 X199.184 Y74.349 E0.01325 ; perimeter
G1 X198.362 Y73.364 E0.05284 ; perimeter
G1 X198.871 Y72.937 E0.02737 ; perimeter
G1 X199.760 Y73.997 E0.05702 ; perimeter
G1 X199.977 Y74.306 E0.01555 ; perimeter
G1 X200.160 Y74.715 E0.01844 ; perimeter
G1 X200.240 Y75.001 E0.01225 ; perimeter
G1 X200.286 Y75.392 E0.01619 ; perimeter
G1 X200.265 Y75.872 E0.01981 ; perimeter
G1 X200.182 Y76.291 E0.01758 ; perimeter
G1 X200.038 Y76.716 E0.01850 ; perimeter
G1 X199.832 Y77.135 E0.01924 ; perimeter
G1 X199.580 Y77.524 E0.01911 ; perimeter
G1 X199.252 Y77.918 E0.02112 ; perimeter
G1 X198.875 Y78.275 E0.02138 ; perimeter
G1 X172.104 Y100.738 E1.43965 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X148.311 Y100.738 E0.70190 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.852 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X147.859 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E0.98480 ; perimeter
G1 X198.262 Y77.573 E1.42492 ; perimeter
G1 X198.550 Y77.293 E0.01657 ; perimeter
G1 X198.799 Y76.970 E0.01678 ; perimeter
G1 X198.994 Y76.620 E0.01654 ; perimeter
G1 X199.130 Y76.250 E0.01621 ; perimeter
G1 X199.201 Y75.872 E0.01584 ; perimeter
G1 X199.204 Y75.497 E0.01546 ; perimeter
G1 X199.138 Y75.136 E0.01513 ; perimeter
G1 X199.005 Y74.802 E0.01480 ; perimeter
G1 X198.864 Y74.584 E0.01069 ; perimeter
G1 X197.804 Y73.315 E0.06813 ; perimeter
G1 X198.920 Y72.379 E0.05998 ; perimeter
G1 X200.075 Y73.756 E0.07404 ; perimeter
G1 X200.323 Y74.110 E0.01782 ; perimeter
G1 X200.534 Y74.580 E0.02124 ; perimeter
G1 X200.630 Y74.925 E0.01473 ; perimeter
G1 X200.683 Y75.377 E0.01877 ; perimeter
G1 X200.659 Y75.919 E0.02236 ; perimeter
G1 X200.566 Y76.393 E0.01990 ; perimeter
G1 X200.405 Y76.867 E0.02063 ; perimeter
G1 X200.178 Y77.331 E0.02128 ; perimeter
G1 X199.899 Y77.760 E0.02106 ; perimeter
G1 X199.541 Y78.190 E0.02306 ; perimeter
G1 X199.138 Y78.571 E0.02284 ; perimeter
G1 X172.248 Y101.134 E1.44607 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X147.912 Y101.134 E0.70199 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.062 Y100.794 F10800.000 ; move inwards before travel
G1 F8640
G1 X147.859 Y99.806 E-0.30688 ; wipe and retract
G1 X149.822 Y99.806 E-0.45312 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X166.843 Y100.714 ; move to first infill point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.061 Y101.496 E0.05566 ; infill
G1 X166.061 Y101.931 E0.02188 ; infill
G1 X166.312 Y101.931 E0.01260 ; infill
G1 X167.327 Y100.915 E0.07230 ; infill
G1 X168.012 Y100.915 E0.03448 ; infill
G1 X166.996 Y101.931 E0.07230 ; infill
G1 X167.681 Y101.931 E0.03448 ; infill
G1 X168.697 Y100.915 E0.07230 ; infill
G1 X169.382 Y100.915 E0.03448 ; infill
G1 X168.366 Y101.931 E0.07230 ; infill
G1 X169.051 Y101.931 E0.03448 ; infill
G1 X169.744 Y101.238 E0.04931 ; infill
G1 X169.744 Y101.923 E0.03448 ; infill
G1 X169.535 Y102.131 E0.01484 ; infill
G1 F8640
G1 X169.744 Y101.923 E-0.06809 ; wipe and retract
G1 X169.744 Y101.238 E-0.15815 ; wipe and retract
G1 X169.051 Y101.931 E-0.22616 ; wipe and retract
G1 X168.366 Y101.931 E-0.15815 ; wipe and retract
G1 X168.824 Y101.473 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X101.464 Y138.884 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.70438 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X50.840 Y116.421 E1.43965 ; perimeter
G1 X50.462 Y116.064 E0.02142 ; perimeter
G1 X50.145 Y115.685 E0.02034 ; perimeter
G1 X49.882 Y115.281 E0.01986 ; perimeter
G1 X49.677 Y114.862 E0.01923 ; perimeter
G1 X49.534 Y114.439 E0.01838 ; perimeter
G1 X49.442 Y113.953 E0.02038 ; perimeter
G1 X49.428 Y113.541 E0.01699 ; perimeter
G1 X49.475 Y113.150 E0.01624 ; perimeter
G1 X49.578 Y112.787 E0.01553 ; perimeter
G1 X49.734 Y112.458 E0.01500 ; perimeter
G1 X49.955 Y112.143 E0.01583 ; perimeter
G1 X50.844 Y111.083 E0.05701 ; perimeter
G1 X51.352 Y111.509 E0.02729 ; perimeter
G1 X50.587 Y112.421 E0.04901 ; perimeter
G1 X50.359 Y112.760 E0.01685 ; perimeter
G1 X50.194 Y113.171 E0.01826 ; perimeter
G1 X50.114 Y113.609 E0.01834 ; perimeter
G1 X50.118 Y114.057 E0.01847 ; perimeter
G1 X50.202 Y114.502 E0.01864 ; perimeter
G1 X50.359 Y114.931 E0.01884 ; perimeter
G1 X50.584 Y115.335 E0.01903 ; perimeter
G1 X50.868 Y115.704 E0.01917 ; perimeter
G1 X51.188 Y116.014 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.43145 ; perimeter
G1 X101.461 Y138.349 E0.97451 ; perimeter
G1 X101.464 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.863 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.70446 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03671 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X50.577 Y116.717 E1.44607 ; perimeter
G1 X50.173 Y116.336 E0.02286 ; perimeter
G1 X49.826 Y115.921 E0.02228 ; perimeter
G1 X49.537 Y115.477 E0.02183 ; perimeter
G1 X49.310 Y115.013 E0.02127 ; perimeter
G1 X49.149 Y114.540 E0.02059 ; perimeter
G1 X49.047 Y113.997 E0.02278 ; perimeter
G1 X49.031 Y113.524 E0.01947 ; perimeter
G1 X49.085 Y113.072 E0.01879 ; perimeter
G1 X49.205 Y112.647 E0.01818 ; perimeter
G1 X49.390 Y112.258 E0.01775 ; perimeter
G1 X49.640 Y111.902 E0.01792 ; perimeter
G1 X50.795 Y110.525 E0.07404 ; perimeter
G1 X51.910 Y111.460 E0.05995 ; perimeter
G1 X50.904 Y112.659 E0.06447 ; perimeter
G1 X50.711 Y112.946 E0.01426 ; perimeter
G1 X50.576 Y113.282 E0.01489 ; perimeter
G1 X50.510 Y113.643 E0.01513 ; perimeter
G1 X50.514 Y114.019 E0.01546 ; perimeter
G1 X50.585 Y114.396 E0.01584 ; perimeter
G1 X50.721 Y114.766 E0.01621 ; perimeter
G1 X50.916 Y115.117 E0.01654 ; perimeter
G1 X51.164 Y115.439 E0.01678 ; perimeter
G1 X51.453 Y115.719 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.42492 ; perimeter
G1 X101.855 Y137.952 E0.98480 ; perimeter
G1 X101.862 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.463 Y139.273 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.571 Y139.232 E-0.76000 ; wipe and retract
M73 Q60 S55
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X83.445 Y140.278 ; move to first infill point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.654 Y140.069 E0.01484 ; infill
G1 X83.654 Y139.384 E0.03448 ; infill
G1 X82.961 Y140.077 E0.04931 ; infill
G1 X82.276 Y140.077 E0.03448 ; infill
G1 X83.292 Y139.061 E0.07230 ; infill
G1 X82.607 Y139.061 E0.03448 ; infill
G1 X81.591 Y140.077 E0.07230 ; infill
G1 X80.906 Y140.077 E0.03448 ; infill
G1 X81.922 Y139.061 E0.07230 ; infill
G1 X81.237 Y139.061 E0.03448 ; infill
G1 X80.221 Y140.077 E0.07230 ; infill
G1 X79.971 Y140.077 E0.01260 ; infill
G1 X79.971 Y139.642 E0.02188 ; infill
G1 X80.753 Y138.860 E0.05566 ; infill
G1 F8640
G1 X79.971 Y139.642 E-0.25530 ; wipe and retract
G1 X79.971 Y140.077 E-0.10036 ; wipe and retract
G1 X80.221 Y140.077 E-0.05779 ; wipe and retract
G1 X81.237 Y139.061 E-0.33164 ; wipe and retract
G1 X81.301 Y139.061 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X57.382 Y109.641 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X54.763 Y107.444 E0.14083 ; perimeter
G1 X52.314 Y110.363 E0.15696 ; perimeter
G1 X51.806 Y109.937 E0.02729 ; perimeter
G1 X60.804 Y99.214 E0.57663 ; perimeter
G1 X61.311 Y99.640 E0.02729 ; perimeter
G1 X58.862 Y102.559 E0.15696 ; perimeter
G1 X61.481 Y104.756 E0.14083 ; perimeter
G1 X61.137 Y105.166 E0.02205 ; perimeter
G1 X58.518 Y102.969 E0.14083 ; perimeter
G1 X55.107 Y107.034 E0.21861 ; perimeter
G1 X57.726 Y109.231 E0.14083 ; perimeter
G1 X57.420 Y109.595 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.430 Y110.200 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X54.812 Y108.002 E0.14083 ; perimeter
G1 X52.363 Y110.921 E0.15696 ; perimeter
G1 X51.248 Y109.986 E0.05995 ; perimeter
G1 X60.755 Y98.656 E0.60929 ; perimeter
G1 X61.869 Y99.591 E0.05995 ; perimeter
G1 X59.420 Y102.510 E0.15696 ; perimeter
G1 X62.039 Y104.707 E0.14083 ; perimeter
G1 X61.186 Y105.725 E0.05471 ; perimeter
G1 X58.567 Y103.527 E0.14083 ; perimeter
G1 X55.665 Y106.985 E0.18596 ; perimeter
G1 X58.284 Y109.183 E0.14083 ; perimeter
G1 X57.469 Y110.154 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.158 Y109.907 F10800.000 ; move inwards before travel
G1 F8640
G1 X54.911 Y108.083 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X98.702 Y119.184 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.04695 ; perimeter
G1 X97.562 Y116.014 E0.13058 ; perimeter
G1 X98.702 Y116.014 E0.04695 ; perimeter
G1 X98.702 Y119.124 E0.12811 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.15621 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X65.538 Y98.912 E0.85592 ; perimeter
G1 X65.177 Y98.651 E0.01834 ; perimeter
G1 X64.765 Y98.435 E0.01917 ; perimeter
G1 X64.328 Y98.284 E0.01903 ; perimeter
G1 X63.878 Y98.203 E0.01884 ; perimeter
G1 X63.425 Y98.198 E0.01864 ; perimeter
G1 X62.983 Y98.272 E0.01847 ; perimeter
G1 X62.566 Y98.426 E0.01834 ; perimeter
G1 X62.352 Y98.560 E0.01039 ; perimeter
G1 X61.793 Y98.091 E0.03006 ; perimeter
G1 X62.081 Y97.887 E0.01453 ; perimeter
G1 X62.416 Y97.724 E0.01534 ; perimeter
G1 X62.867 Y97.595 E0.01934 ; perimeter
G1 X63.205 Y97.550 E0.01405 ; perimeter
G1 X63.643 Y97.552 E0.01804 ; perimeter
G1 X64.144 Y97.625 E0.02083 ; perimeter
G1 X64.590 Y97.753 E0.01912 ; perimeter
G1 X65.033 Y97.942 E0.01986 ; perimeter
G1 X65.461 Y98.188 E0.02033 ; perimeter
G1 X65.878 Y98.499 E0.02143 ; perimeter
G1 X81.649 Y111.732 E0.84808 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y115.618 E0.14118 ; perimeter
G1 X99.098 Y115.618 E0.07960 ; perimeter
G1 X99.098 Y119.520 E0.16077 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.17848 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X65.294 Y99.225 E0.86128 ; perimeter
G1 X64.968 Y98.989 E0.01657 ; perimeter
G1 X64.607 Y98.800 E0.01678 ; perimeter
G1 X64.228 Y98.669 E0.01654 ; perimeter
G1 X63.840 Y98.599 E0.01621 ; perimeter
G1 X63.456 Y98.595 E0.01584 ; perimeter
G1 X63.086 Y98.656 E0.01546 ; perimeter
G1 X62.741 Y98.784 E0.01513 ; perimeter
G1 X62.434 Y98.975 E0.01489 ; perimeter
G1 X62.339 Y99.067 E0.00544 ; perimeter
G1 X61.207 Y98.117 E0.06089 ; perimeter
G1 X61.527 Y97.794 E0.01871 ; perimeter
G1 X61.878 Y97.544 E0.01775 ; perimeter
G1 X62.274 Y97.353 E0.01812 ; perimeter
G1 X62.786 Y97.206 E0.02196 ; perimeter
G1 X63.180 Y97.154 E0.01635 ; perimeter
G1 X63.673 Y97.156 E0.02031 ; perimeter
G1 X64.228 Y97.237 E0.02310 ; perimeter
G1 X64.723 Y97.379 E0.02123 ; perimeter
G1 X65.210 Y97.587 E0.02183 ; perimeter
G1 X65.679 Y97.857 E0.02226 ; perimeter
G1 X66.124 Y98.188 E0.02287 ; perimeter
G1 X81.793 Y111.335 E0.84261 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y115.221 E0.14118 ; perimeter
G1 X99.494 Y115.221 E0.11226 ; perimeter
G1 X99.494 Y119.916 E0.19342 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.119 Y119.839 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.203 Y119.962 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X97.677 Y119.038 ; move to first infill point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7756.85
G1 X98.386 Y118.329 E0.04833 ; infill
G1 X98.386 Y117.673 E0.03166 ; infill
G1 X97.878 Y118.181 E0.03463 ; infill
G1 X97.878 Y117.524 E0.03166 ; infill
G1 X98.386 Y117.017 E0.03463 ; infill
G1 X98.386 Y116.360 E0.03166 ; infill
G1 X97.677 Y117.069 E0.04833 ; infill
G1 F8640
G1 X98.386 Y116.360 E-0.23134 ; wipe and retract
G1 X98.386 Y117.017 E-0.15155 ; wipe and retract
G1 X97.878 Y117.524 E-0.16575 ; wipe and retract
G1 X97.878 Y118.181 E-0.15155 ; wipe and retract
G1 X98.061 Y117.998 E-0.05980 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.565 Y124.899 E0.14725 ; perimeter
G1 X75.909 Y124.489 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.14725 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.586 Y116.533 E0.14725 ; perimeter
G1 X82.930 Y116.123 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.14725 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.007 Y124.948 E0.14725 ; perimeter
G1 X75.860 Y123.931 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.14725 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X82.027 Y116.581 E0.14725 ; perimeter
G1 X82.881 Y115.564 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.14725 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M73 P60 R53
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.500 Y116.123 E0.14725 ; perimeter
G1 X166.844 Y116.533 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.14725 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.520 Y124.489 E0.14725 ; perimeter
G1 X173.864 Y124.899 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.14725 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.549 Y115.564 E0.14725 ; perimeter
G1 X167.402 Y116.581 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.14725 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.569 Y123.931 E0.14725 ; perimeter
G1 X174.423 Y124.948 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.14725 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X150.728 Y119.184 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y116.014 E0.13058 ; perimeter
G1 X151.868 Y116.014 E0.04695 ; perimeter
G1 X151.868 Y119.184 E0.13058 ; perimeter
G1 X150.788 Y119.184 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.332 Y115.618 E0.16324 ; perimeter
G1 X152.264 Y115.618 E0.07960 ; perimeter
G1 X152.264 Y119.045 E0.14118 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X183.551 Y98.499 E0.84808 ; perimeter
G1 X183.969 Y98.188 E0.02143 ; perimeter
G1 X184.396 Y97.942 E0.02033 ; perimeter
G1 X184.840 Y97.753 E0.01986 ; perimeter
G1 X185.288 Y97.624 E0.01923 ; perimeter
G1 X185.729 Y97.556 E0.01838 ; perimeter
G1 X186.224 Y97.551 E0.02038 ; perimeter
G1 X186.635 Y97.609 E0.01709 ; perimeter
G1 X186.939 Y97.698 E0.01305 ; perimeter
G1 X187.354 Y97.890 E0.01883 ; perimeter
G1 X187.637 Y98.091 E0.01430 ; perimeter
G1 X187.078 Y98.560 E0.03006 ; perimeter
G1 X186.864 Y98.426 E0.01039 ; perimeter
G1 X186.446 Y98.272 E0.01834 ; perimeter
G1 X186.004 Y98.198 E0.01847 ; perimeter
G1 X185.552 Y98.203 E0.01864 ; perimeter
G1 X185.101 Y98.284 E0.01884 ; perimeter
G1 X184.665 Y98.435 E0.01903 ; perimeter
G1 X184.257 Y98.648 E0.01896 ; perimeter
G1 X184.000 Y98.828 E0.01291 ; perimeter
G1 X167.976 Y112.267 E0.86156 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X150.392 Y119.580 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.935 Y115.221 E0.19589 ; perimeter
G1 X152.660 Y115.221 E0.11226 ; perimeter
G1 X152.660 Y118.648 E0.14118 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X183.305 Y98.188 E0.84261 ; perimeter
G1 X183.751 Y97.857 E0.02287 ; perimeter
G1 X184.219 Y97.587 E0.02226 ; perimeter
G1 X184.707 Y97.379 E0.02183 ; perimeter
G1 X185.203 Y97.236 E0.02127 ; perimeter
G1 X185.697 Y97.160 E0.02059 ; perimeter
G1 X186.250 Y97.154 E0.02278 ; perimeter
G1 X186.719 Y97.221 E0.01951 ; perimeter
G1 X187.079 Y97.326 E0.01545 ; perimeter
G1 X187.553 Y97.546 E0.02155 ; perimeter
G1 X187.903 Y97.794 E0.01766 ; perimeter
G1 X188.222 Y98.117 E0.01871 ; perimeter
G1 X187.090 Y99.067 E0.06089 ; perimeter
G1 X186.995 Y98.975 E0.00544 ; perimeter
G1 X186.688 Y98.784 E0.01489 ; perimeter
G1 X186.344 Y98.656 E0.01513 ; perimeter
G1 X185.974 Y98.595 E0.01546 ; perimeter
G1 X185.589 Y98.599 E0.01584 ; perimeter
G1 X185.202 Y98.669 E0.01621 ; perimeter
G1 X184.822 Y98.800 E0.01654 ; perimeter
G1 X184.463 Y98.988 E0.01670 ; perimeter
G1 X184.242 Y99.143 E0.01114 ; perimeter
G1 X168.120 Y112.663 E0.86679 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X149.995 Y119.976 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.074 Y119.601 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.954 Y116.685 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X150.843 Y119.038 ; move to first infill point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7756.87
G1 X151.552 Y118.329 E0.04833 ; infill
G1 X151.552 Y117.673 E0.03166 ; infill
G1 X151.044 Y118.181 E0.03463 ; infill
G1 X151.044 Y117.524 E0.03166 ; infill
G1 X151.552 Y117.017 E0.03463 ; infill
G1 X151.552 Y116.360 E0.03166 ; infill
G1 X150.843 Y117.069 E0.04833 ; infill
G1 F8640
G1 X151.552 Y116.360 E-0.23134 ; wipe and retract
G1 X151.552 Y117.017 E-0.15155 ; wipe and retract
G1 X151.044 Y117.524 E-0.16575 ; wipe and retract
G1 X151.044 Y118.181 E-0.15155 ; wipe and retract
G1 X151.227 Y117.998 E-0.05980 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X192.048 Y109.641 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X191.704 Y109.231 E0.02205 ; perimeter
G1 X194.323 Y107.034 E0.14083 ; perimeter
G1 X190.912 Y102.969 E0.21861 ; perimeter
G1 X188.293 Y105.166 E0.14083 ; perimeter
G1 X187.949 Y104.756 E0.02205 ; perimeter
G1 X190.568 Y102.559 E0.14083 ; perimeter
G1 X188.119 Y99.640 E0.15696 ; perimeter
G1 X188.626 Y99.214 E0.02729 ; perimeter
G1 X197.623 Y109.937 E0.57663 ; perimeter
G1 X197.116 Y110.363 E0.02729 ; perimeter
G1 X194.667 Y107.444 E0.15696 ; perimeter
G1 X192.094 Y109.603 E0.13836 ; perimeter
M204 S1000 ; adjust acceleration
G1 X191.999 Y110.200 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X191.146 Y109.183 E0.05471 ; perimeter
G1 X193.764 Y106.985 E0.14083 ; perimeter
G1 X190.863 Y103.527 E0.18596 ; perimeter
G1 X188.244 Y105.725 E0.14083 ; perimeter
G1 X187.390 Y104.707 E0.05471 ; perimeter
G1 X190.009 Y102.510 E0.14083 ; perimeter
G1 X187.560 Y99.591 E0.15696 ; perimeter
G1 X188.675 Y98.656 E0.05995 ; perimeter
G1 X198.182 Y109.986 E0.60929 ; perimeter
G1 X197.067 Y110.921 E0.05995 ; perimeter
G1 X194.618 Y108.002 E0.15696 ; perimeter
G1 X192.045 Y110.161 E0.13836 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.041 Y109.802 F10800.000 ; move inwards before travel
G1 F8640
G1 X191.146 Y109.183 E-0.30695 ; wipe and retract
G1 X192.649 Y107.921 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X147.965 Y138.884 ; move to first perimeter point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X147.968 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E0.97451 ; perimeter
G1 X198.242 Y116.014 E1.43145 ; perimeter
G1 X198.562 Y115.704 E0.01834 ; perimeter
G1 X198.846 Y115.335 E0.01918 ; perimeter
G1 X199.070 Y114.931 E0.01903 ; perimeter
G1 X199.228 Y114.502 E0.01884 ; perimeter
G1 X199.312 Y114.057 E0.01864 ; perimeter
G1 X199.316 Y113.609 E0.01847 ; perimeter
G1 X199.236 Y113.171 E0.01834 ; perimeter
G1 X199.073 Y112.765 E0.01802 ; perimeter
G1 X198.898 Y112.495 E0.01325 ; perimeter
G1 X198.077 Y111.510 E0.05284 ; perimeter
G1 X198.585 Y111.083 E0.02737 ; perimeter
G1 X199.475 Y112.144 E0.05702 ; perimeter
G1 X199.692 Y112.452 E0.01555 ; perimeter
G1 X199.875 Y112.861 E0.01844 ; perimeter
G1 X199.955 Y113.148 E0.01225 ; perimeter
G1 X200.001 Y113.538 E0.01619 ; perimeter
G1 X199.979 Y114.018 E0.01981 ; perimeter
G1 X199.897 Y114.437 E0.01758 ; perimeter
G1 X199.752 Y114.862 E0.01850 ; perimeter
G1 X199.547 Y115.282 E0.01924 ; perimeter
G1 X199.294 Y115.670 E0.01911 ; perimeter
G1 X198.967 Y116.065 E0.02112 ; perimeter
G1 X198.589 Y116.421 E0.02138 ; perimeter
G1 X171.819 Y138.884 E1.43965 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X148.025 Y138.884 E0.70190 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.567 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X147.574 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E0.98480 ; perimeter
G1 X197.976 Y115.719 E1.42492 ; perimeter
G1 X198.265 Y115.439 E0.01657 ; perimeter
G1 X198.514 Y115.117 E0.01678 ; perimeter
G1 X198.709 Y114.766 E0.01654 ; perimeter
G1 X198.845 Y114.396 E0.01621 ; perimeter
G1 X198.916 Y114.019 E0.01584 ; perimeter
G1 X198.919 Y113.643 E0.01546 ; perimeter
G1 X198.853 Y113.282 E0.01513 ; perimeter
G1 X198.719 Y112.948 E0.01480 ; perimeter
G1 X198.579 Y112.731 E0.01069 ; perimeter
G1 X197.519 Y111.461 E0.06813 ; perimeter
G1 X198.634 Y110.525 E0.05998 ; perimeter
G1 X199.790 Y111.902 E0.07404 ; perimeter
G1 X200.038 Y112.256 E0.01782 ; perimeter
G1 X200.249 Y112.726 E0.02124 ; perimeter
G1 X200.345 Y113.071 E0.01473 ; perimeter
G1 X200.398 Y113.523 E0.01877 ; perimeter
G1 X200.374 Y114.065 E0.02236 ; perimeter
G1 X200.281 Y114.539 E0.01990 ; perimeter
G1 X200.120 Y115.013 E0.02063 ; perimeter
G1 X199.893 Y115.477 E0.02128 ; perimeter
G1 X199.614 Y115.906 E0.02106 ; perimeter
G1 X199.256 Y116.336 E0.02306 ; perimeter
G1 X198.853 Y116.717 E0.02284 ; perimeter
G1 X171.963 Y139.280 E1.44607 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X147.627 Y139.280 E0.70199 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.777 Y138.940 F10800.000 ; move inwards before travel
G1 F8640
G1 X147.574 Y137.952 E-0.30688 ; wipe and retract
G1 X149.537 Y137.952 E-0.45312 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
G1 X166.558 Y138.860 ; move to first infill point
G1 Z13.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.776 Y139.642 E0.05566 ; infill
G1 X165.776 Y140.077 E0.02188 ; infill
G1 X166.026 Y140.077 E0.01260 ; infill
G1 X167.042 Y139.061 E0.07230 ; infill
G1 X167.727 Y139.061 E0.03448 ; infill
G1 X166.711 Y140.077 E0.07230 ; infill
G1 X167.396 Y140.077 E0.03448 ; infill
G1 X168.412 Y139.061 E0.07230 ; infill
G1 X169.097 Y139.061 E0.03448 ; infill
G1 X168.081 Y140.077 E0.07230 ; infill
G1 X168.766 Y140.077 E0.03448 ; infill
G1 X169.459 Y139.384 E0.04931 ; infill
G1 X169.459 Y140.069 E0.03448 ; infill
G1 X169.250 Y140.278 E0.01484 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;13.25


G1 F8640
G1 X169.459 Y140.069 E-0.06809 ; wipe and retract
G1 X169.459 Y139.384 E-0.15815 ; wipe and retract
G1 X168.766 Y140.077 E-0.22616 ; wipe and retract
G1 X168.081 Y140.077 E-0.15815 ; wipe and retract
G1 X168.539 Y139.619 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;13.25
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X101.402 Y100.738 ; move to first perimeter point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.69007 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X50.991 Y78.162 E1.44687 ; perimeter
G1 X50.614 Y77.806 E0.02136 ; perimeter
G1 X50.298 Y77.429 E0.02029 ; perimeter
G1 X50.035 Y77.026 E0.01980 ; perimeter
G1 X49.830 Y76.608 E0.01918 ; perimeter
G1 X49.687 Y76.187 E0.01832 ; perimeter
G1 X49.593 Y75.688 E0.02092 ; perimeter
G1 X49.580 Y75.278 E0.01691 ; perimeter
G1 X49.626 Y74.888 E0.01619 ; perimeter
G1 X49.730 Y74.526 E0.01548 ; perimeter
G1 X49.885 Y74.198 E0.01496 ; perimeter
G1 X50.106 Y73.885 E0.01578 ; perimeter
G1 X50.995 Y72.825 E0.05702 ; perimeter
G1 X51.503 Y73.251 E0.02729 ; perimeter
G1 X50.738 Y74.162 E0.04901 ; perimeter
G1 X50.510 Y74.501 E0.01685 ; perimeter
G1 X50.345 Y74.913 E0.01826 ; perimeter
G1 X50.265 Y75.350 E0.01834 ; perimeter
G1 X50.269 Y75.799 E0.01847 ; perimeter
G1 X50.353 Y76.243 E0.01864 ; perimeter
G1 X50.510 Y76.673 E0.01884 ; perimeter
G1 X50.735 Y77.076 E0.01903 ; perimeter
G1 X51.019 Y77.445 E0.01917 ; perimeter
G1 X51.339 Y77.755 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.43866 ; perimeter
G1 X101.405 Y100.203 E0.96043 ; perimeter
G1 X101.402 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.797 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.68999 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03671 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X50.728 Y78.458 E1.45329 ; perimeter
G1 X50.325 Y78.079 E0.02279 ; perimeter
G1 X49.979 Y77.665 E0.02222 ; perimeter
G1 X49.690 Y77.222 E0.02177 ; perimeter
G1 X49.463 Y76.760 E0.02122 ; perimeter
G1 X49.302 Y76.288 E0.02053 ; perimeter
G1 X49.198 Y75.731 E0.02334 ; perimeter
G1 X49.183 Y75.261 E0.01940 ; perimeter
G1 X49.237 Y74.809 E0.01873 ; perimeter
G1 X49.357 Y74.386 E0.01813 ; perimeter
G1 X49.542 Y73.998 E0.01770 ; perimeter
G1 X49.791 Y73.643 E0.01787 ; perimeter
G1 X50.946 Y72.266 E0.07404 ; perimeter
G1 X52.061 Y73.202 E0.05995 ; perimeter
G1 X51.055 Y74.401 E0.06447 ; perimeter
G1 X50.862 Y74.688 E0.01426 ; perimeter
G1 X50.727 Y75.023 E0.01489 ; perimeter
G1 X50.661 Y75.385 E0.01513 ; perimeter
G1 X50.665 Y75.760 E0.01546 ; perimeter
G1 X50.736 Y76.138 E0.01584 ; perimeter
G1 X50.872 Y76.507 E0.01621 ; perimeter
G1 X51.067 Y76.858 E0.01654 ; perimeter
G1 X51.316 Y77.180 E0.01678 ; perimeter
G1 X51.604 Y77.460 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.43213 ; perimeter
G1 X101.803 Y99.806 E0.97090 ; perimeter
G1 X101.797 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.397 Y101.127 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.505 Y101.086 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X84.140 Y101.697 ; move to first infill point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.358 Y100.915 E0.05567 ; infill
G1 X82.673 Y100.915 E0.03448 ; infill
G1 X83.688 Y101.931 E0.07230 ; infill
G1 X83.003 Y101.931 E0.03448 ; infill
G1 X81.988 Y100.915 E0.07230 ; infill
G1 X81.303 Y100.915 E0.03448 ; infill
G1 X82.318 Y101.931 E0.07230 ; infill
G1 X81.634 Y101.931 E0.03448 ; infill
G1 X80.618 Y100.915 E0.07230 ; infill
G1 X80.256 Y100.915 E0.01821 ; infill
G1 X80.256 Y101.238 E0.01627 ; infill
G1 X80.949 Y101.931 E0.04930 ; infill
G1 X80.264 Y101.931 E0.03448 ; infill
G1 X80.055 Y101.722 E0.01483 ; infill
G1 F8640
G1 X80.264 Y101.931 E-0.06804 ; wipe and retract
G1 X80.949 Y101.931 E-0.15815 ; wipe and retract
G1 X80.256 Y101.238 E-0.22612 ; wipe and retract
G1 X80.256 Y100.915 E-0.07462 ; wipe and retract
G1 X80.618 Y100.915 E-0.08353 ; wipe and retract
G1 X81.076 Y101.373 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X57.528 Y71.379 ; move to first perimeter point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X54.914 Y69.185 E0.14056 ; perimeter
G1 X52.465 Y72.104 E0.15696 ; perimeter
G1 X51.957 Y71.678 E0.02729 ; perimeter
G1 X60.955 Y60.956 E0.57663 ; perimeter
G1 X61.462 Y61.381 E0.02729 ; perimeter
G1 X59.013 Y64.300 E0.15696 ; perimeter
G1 X61.627 Y66.493 E0.14056 ; perimeter
G1 X61.283 Y66.903 E0.02205 ; perimeter
G1 X58.669 Y64.710 E0.14056 ; perimeter
G1 X55.258 Y68.775 E0.21861 ; perimeter
G1 X57.872 Y70.968 E0.14056 ; perimeter
G1 X57.566 Y71.333 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.576 Y71.937 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X54.963 Y69.744 E0.14056 ; perimeter
G1 X52.514 Y72.662 E0.15696 ; perimeter
G1 X51.399 Y71.727 E0.05995 ; perimeter
G1 X60.906 Y60.397 E0.60929 ; perimeter
G1 X62.021 Y61.333 E0.05995 ; perimeter
G1 X59.572 Y64.251 E0.15696 ; perimeter
G1 X62.185 Y66.444 E0.14056 ; perimeter
G1 X61.332 Y67.462 E0.05471 ; perimeter
G1 X58.718 Y65.269 E0.14056 ; perimeter
G1 X55.816 Y68.726 E0.18596 ; perimeter
G1 X58.430 Y70.920 E0.14056 ; perimeter
G1 X57.615 Y71.891 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.304 Y71.644 F10800.000 ; move inwards before travel
G1 F8640
G1 X55.057 Y69.820 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X98.987 Y81.038 ; move to first perimeter point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.04695 ; perimeter
G1 X97.847 Y77.693 E0.13779 ; perimeter
G1 X98.987 Y77.693 E0.04695 ; perimeter
G1 X98.987 Y80.978 E0.13532 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.15621 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X65.689 Y60.653 E0.86313 ; perimeter
G1 X65.328 Y60.392 E0.01834 ; perimeter
G1 X64.916 Y60.176 E0.01917 ; perimeter
G1 X64.479 Y60.025 E0.01903 ; perimeter
G1 X64.029 Y59.945 E0.01884 ; perimeter
G1 X63.577 Y59.939 E0.01864 ; perimeter
G1 X63.134 Y60.013 E0.01847 ; perimeter
G1 X62.717 Y60.168 E0.01834 ; perimeter
G1 X62.503 Y60.301 E0.01039 ; perimeter
G1 X61.944 Y59.832 E0.03005 ; perimeter
G1 X62.230 Y59.629 E0.01444 ; perimeter
G1 X62.563 Y59.467 E0.01526 ; perimeter
G1 X63.027 Y59.335 E0.01987 ; perimeter
G1 X63.350 Y59.292 E0.01342 ; perimeter
G1 X63.786 Y59.293 E0.01798 ; perimeter
G1 X64.300 Y59.368 E0.02140 ; perimeter
G1 X64.745 Y59.496 E0.01905 ; perimeter
G1 X65.187 Y59.685 E0.01981 ; perimeter
G1 X65.598 Y59.922 E0.01956 ; perimeter
G1 X66.030 Y60.241 E0.02212 ; perimeter
G1 X81.934 Y73.586 E0.85525 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y77.296 E0.14840 ; perimeter
G1 X99.383 Y77.296 E0.07960 ; perimeter
G1 X99.383 Y81.374 E0.16798 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.17848 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X65.445 Y60.966 E0.86849 ; perimeter
G1 X65.119 Y60.730 E0.01657 ; perimeter
G1 X64.758 Y60.541 E0.01678 ; perimeter
G1 X64.379 Y60.410 E0.01654 ; perimeter
G1 X63.992 Y60.341 E0.01621 ; perimeter
G1 X63.607 Y60.336 E0.01584 ; perimeter
G1 X63.237 Y60.398 E0.01546 ; perimeter
G1 X62.892 Y60.526 E0.01513 ; perimeter
G1 X62.586 Y60.716 E0.01489 ; perimeter
G1 X62.490 Y60.808 E0.00544 ; perimeter
G1 X61.358 Y59.858 E0.06089 ; perimeter
G1 X61.677 Y59.536 E0.01867 ; perimeter
G1 X62.027 Y59.287 E0.01770 ; perimeter
G1 X62.421 Y59.095 E0.01805 ; perimeter
G1 X62.947 Y58.946 E0.02249 ; perimeter
G1 X63.324 Y58.896 E0.01569 ; perimeter
G1 X63.815 Y58.897 E0.02024 ; perimeter
G1 X64.384 Y58.979 E0.02369 ; perimeter
G1 X64.878 Y59.122 E0.02117 ; perimeter
G1 X65.364 Y59.330 E0.02178 ; perimeter
G1 X65.816 Y59.590 E0.02146 ; perimeter
G1 X66.276 Y59.929 E0.02356 ; perimeter
G1 X82.078 Y73.189 E0.84981 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y76.900 E0.14840 ; perimeter
G1 X99.780 Y76.900 E0.11226 ; perimeter
G1 X99.780 Y81.770 E0.20063 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.405 Y81.691 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.488 Y81.816 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X98.872 Y80.848 ; move to first infill point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7426.72
G1 X98.163 Y80.140 E0.05048 ; infill
G1 X98.163 Y79.454 E0.03454 ; infill
G1 X98.671 Y79.962 E0.03617 ; infill
G1 X98.671 Y79.276 E0.03454 ; infill
G1 X98.163 Y78.769 E0.03617 ; infill
G1 X98.163 Y78.083 E0.03454 ; infill
G1 X98.872 Y78.792 E0.05048 ; infill
G1 F8640
G1 X98.163 Y78.083 E-0.23134 ; wipe and retract
G1 X98.163 Y78.769 E-0.15829 ; wipe and retract
G1 X98.671 Y79.276 E-0.16575 ; wipe and retract
G1 X98.671 Y79.962 E-0.15829 ; wipe and retract
G1 X98.529 Y79.820 E-0.04633 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.913 Y86.805 E0.14391 ; perimeter
G1 X76.257 Y86.395 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.14391 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.933 Y78.439 E0.14391 ; perimeter
G1 X83.277 Y78.029 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.14391 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.354 Y86.854 E0.14391 ; perimeter
G1 X76.208 Y85.837 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.14391 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.375 Y78.488 E0.14391 ; perimeter
G1 X83.228 Y77.470 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.14391 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.723 Y78.029 E0.14391 ; perimeter
M73 Q61 S54
G1 X167.067 Y78.439 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.14391 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.743 Y86.395 E0.14391 ; perimeter
G1 X174.087 Y86.805 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.14391 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X166.772 Y77.470 E0.14391 ; perimeter
G1 X167.625 Y78.488 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.14391 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X173.792 Y85.837 E0.14391 ; perimeter
G1 X174.646 Y86.854 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.14391 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X151.013 Y81.038 ; move to first perimeter point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y77.693 E0.13779 ; perimeter
G1 X152.153 Y77.693 E0.04695 ; perimeter
G1 X152.153 Y81.038 E0.13779 ; perimeter
G1 X151.073 Y81.038 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.617 Y77.296 E0.17045 ; perimeter
G1 X152.549 Y77.296 E0.07960 ; perimeter
G1 X152.549 Y80.899 E0.14840 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X183.970 Y60.241 E0.85525 ; perimeter
G1 X184.402 Y59.922 E0.02212 ; perimeter
G1 X184.813 Y59.685 E0.01956 ; perimeter
G1 X185.255 Y59.496 E0.01981 ; perimeter
G1 X185.703 Y59.367 E0.01918 ; perimeter
G1 X186.142 Y59.298 E0.01832 ; perimeter
G1 X186.650 Y59.293 E0.02092 ; perimeter
G1 X187.059 Y59.351 E0.01703 ; perimeter
G1 X187.349 Y59.436 E0.01245 ; perimeter
G1 X187.775 Y59.633 E0.01935 ; perimeter
G1 X188.056 Y59.832 E0.01418 ; perimeter
G1 X187.497 Y60.301 E0.03005 ; perimeter
G1 X187.283 Y60.168 E0.01039 ; perimeter
G1 X186.866 Y60.013 E0.01834 ; perimeter
G1 X186.423 Y59.939 E0.01847 ; perimeter
G1 X185.971 Y59.945 E0.01864 ; perimeter
G1 X185.521 Y60.025 E0.01884 ; perimeter
G1 X185.084 Y60.176 E0.01903 ; perimeter
G1 X184.676 Y60.390 E0.01897 ; perimeter
G1 X184.416 Y60.572 E0.01310 ; perimeter
G1 X168.261 Y74.121 E0.86857 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X150.677 Y81.434 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X150.220 Y76.900 E0.20310 ; perimeter
G1 X152.945 Y76.900 E0.11226 ; perimeter
G1 X152.945 Y80.502 E0.14840 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X183.724 Y59.929 E0.84981 ; perimeter
G1 X184.184 Y59.590 E0.02356 ; perimeter
G1 X184.636 Y59.330 E0.02146 ; perimeter
G1 X185.122 Y59.122 E0.02178 ; perimeter
G1 X185.617 Y58.979 E0.02122 ; perimeter
G1 X186.109 Y58.902 E0.02053 ; perimeter
G1 X186.676 Y58.896 E0.02334 ; perimeter
G1 X187.143 Y58.963 E0.01944 ; perimeter
G1 X187.488 Y59.064 E0.01482 ; perimeter
G1 X187.975 Y59.288 E0.02208 ; perimeter
G1 X188.323 Y59.536 E0.01760 ; perimeter
G1 X188.642 Y59.858 E0.01867 ; perimeter
G1 X187.510 Y60.808 E0.06089 ; perimeter
G1 X187.414 Y60.716 E0.00544 ; perimeter
G1 X187.108 Y60.526 E0.01489 ; perimeter
G1 X186.763 Y60.398 E0.01513 ; perimeter
G1 X186.393 Y60.336 E0.01546 ; perimeter
G1 X186.008 Y60.341 E0.01584 ; perimeter
G1 X185.621 Y60.410 E0.01621 ; perimeter
G1 X185.242 Y60.541 E0.01654 ; perimeter
G1 X184.883 Y60.729 E0.01670 ; perimeter
G1 X184.657 Y60.887 E0.01133 ; perimeter
G1 X168.405 Y74.517 E0.87380 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X150.280 Y81.830 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.359 Y81.455 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.240 Y78.539 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X152.038 Y80.848 ; move to first infill point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7426.74
G1 X151.329 Y80.140 E0.05048 ; infill
G1 X151.329 Y79.454 E0.03454 ; infill
G1 X151.837 Y79.962 E0.03617 ; infill
G1 X151.837 Y79.276 E0.03454 ; infill
G1 X151.329 Y78.769 E0.03617 ; infill
G1 X151.329 Y78.083 E0.03454 ; infill
G1 X152.038 Y78.792 E0.05048 ; infill
G1 F8640
G1 X151.329 Y78.083 E-0.23134 ; wipe and retract
G1 X151.329 Y78.769 E-0.15829 ; wipe and retract
G1 X151.837 Y79.276 E-0.16575 ; wipe and retract
G1 X151.837 Y79.962 E-0.15829 ; wipe and retract
G1 X151.695 Y79.820 E-0.04633 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X192.472 Y71.379 ; move to first perimeter point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X192.128 Y70.968 E0.02205 ; perimeter
G1 X194.742 Y68.775 E0.14056 ; perimeter
G1 X191.331 Y64.710 E0.21861 ; perimeter
G1 X188.717 Y66.903 E0.14056 ; perimeter
G1 X188.373 Y66.493 E0.02205 ; perimeter
G1 X190.987 Y64.300 E0.14056 ; perimeter
G1 X188.538 Y61.381 E0.15696 ; perimeter
G1 X189.045 Y60.956 E0.02729 ; perimeter
G1 X198.043 Y71.678 E0.57663 ; perimeter
G1 X197.535 Y72.104 E0.02729 ; perimeter
G1 X195.086 Y69.185 E0.15696 ; perimeter
G1 X192.518 Y71.340 E0.13809 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.424 Y71.937 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X191.570 Y70.920 E0.05471 ; perimeter
G1 X194.184 Y68.726 E0.14056 ; perimeter
G1 X191.282 Y65.269 E0.18596 ; perimeter
G1 X188.668 Y67.462 E0.14056 ; perimeter
G1 X187.815 Y66.444 E0.05471 ; perimeter
G1 X190.428 Y64.251 E0.14056 ; perimeter
G1 X187.979 Y61.333 E0.15696 ; perimeter
G1 X189.094 Y60.397 E0.05995 ; perimeter
G1 X198.601 Y71.727 E0.60929 ; perimeter
G1 X197.486 Y72.662 E0.05995 ; perimeter
G1 X195.037 Y69.744 E0.15696 ; perimeter
G1 X192.469 Y71.898 E0.13809 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.466 Y71.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X191.570 Y70.920 E-0.30695 ; wipe and retract
G1 X193.073 Y69.658 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X148.598 Y100.738 ; move to first perimeter point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X148.595 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E0.96043 ; perimeter
G1 X198.661 Y77.755 E1.43866 ; perimeter
G1 X198.981 Y77.445 E0.01834 ; perimeter
G1 X199.265 Y77.076 E0.01918 ; perimeter
G1 X199.490 Y76.673 E0.01903 ; perimeter
G1 X199.647 Y76.243 E0.01884 ; perimeter
G1 X199.731 Y75.799 E0.01864 ; perimeter
G1 X199.735 Y75.350 E0.01847 ; perimeter
G1 X199.655 Y74.913 E0.01834 ; perimeter
G1 X199.492 Y74.506 E0.01804 ; perimeter
G1 X199.315 Y74.234 E0.01339 ; perimeter
G1 X198.496 Y73.252 E0.05269 ; perimeter
G1 X199.005 Y72.825 E0.02736 ; perimeter
G1 X199.894 Y73.885 E0.05702 ; perimeter
G1 X200.118 Y74.203 E0.01600 ; perimeter
G1 X200.270 Y74.525 E0.01469 ; perimeter
G1 X200.372 Y74.883 E0.01532 ; perimeter
G1 X200.421 Y75.363 E0.01987 ; perimeter
G1 X200.408 Y75.688 E0.01342 ; perimeter
G1 X200.331 Y76.118 E0.01798 ; perimeter
G1 X200.168 Y76.611 E0.02140 ; perimeter
G1 X199.964 Y77.027 E0.01907 ; perimeter
G1 X199.721 Y77.400 E0.01836 ; perimeter
G1 X199.384 Y77.808 E0.02178 ; perimeter
G1 X199.009 Y78.162 E0.02128 ; perimeter
G1 X172.104 Y100.738 E1.44687 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
M73 P61 R52
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X148.658 Y100.738 E0.68760 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.203 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X148.197 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E0.97090 ; perimeter
G1 X198.396 Y77.460 E1.43213 ; perimeter
G1 X198.685 Y77.180 E0.01657 ; perimeter
G1 X198.933 Y76.858 E0.01678 ; perimeter
G1 X199.128 Y76.507 E0.01654 ; perimeter
G1 X199.264 Y76.138 E0.01621 ; perimeter
G1 X199.335 Y75.760 E0.01584 ; perimeter
G1 X199.339 Y75.385 E0.01546 ; perimeter
G1 X199.273 Y75.023 E0.01513 ; perimeter
G1 X199.139 Y74.690 E0.01481 ; perimeter
G1 X198.996 Y74.469 E0.01082 ; perimeter
G1 X197.938 Y73.202 E0.06799 ; perimeter
G1 X199.054 Y72.266 E0.05998 ; perimeter
G1 X200.209 Y73.643 E0.07404 ; perimeter
G1 X200.459 Y74.000 E0.01795 ; perimeter
G1 X200.642 Y74.386 E0.01760 ; perimeter
G1 X200.763 Y74.808 E0.01807 ; perimeter
G1 X200.819 Y75.351 E0.02249 ; perimeter
G1 X200.802 Y75.731 E0.01569 ; perimeter
G1 X200.716 Y76.215 E0.02024 ; perimeter
G1 X200.536 Y76.761 E0.02369 ; perimeter
G1 X200.310 Y77.223 E0.02118 ; perimeter
G1 X200.041 Y77.635 E0.02028 ; perimeter
G1 X199.674 Y78.079 E0.02372 ; perimeter
G1 X199.272 Y78.458 E0.02276 ; perimeter
G1 X172.248 Y101.134 E1.45329 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X148.263 Y101.134 E0.68752 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.411 Y100.792 F10800.000 ; move inwards before travel
G1 F8640
G1 X148.197 Y99.806 E-0.30702 ; wipe and retract
G1 X150.159 Y99.806 E-0.45298 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X165.860 Y101.722 ; move to first infill point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.069 Y101.931 E0.01484 ; infill
G1 X166.754 Y101.931 E0.03448 ; infill
G1 X166.061 Y101.238 E0.04930 ; infill
G1 X166.061 Y100.915 E0.01627 ; infill
G1 X166.423 Y100.915 E0.01821 ; infill
G1 X167.439 Y101.931 E0.07230 ; infill
G1 X168.124 Y101.931 E0.03448 ; infill
G1 X167.108 Y100.915 E0.07230 ; infill
G1 X167.793 Y100.915 E0.03448 ; infill
G1 X168.808 Y101.931 E0.07230 ; infill
G1 X169.493 Y101.931 E0.03448 ; infill
G1 X168.478 Y100.915 E0.07230 ; infill
G1 X169.163 Y100.915 E0.03448 ; infill
G1 X169.945 Y101.697 E0.05567 ; infill
G1 F8640
G1 X169.163 Y100.915 E-0.25535 ; wipe and retract
G1 X168.478 Y100.915 E-0.15815 ; wipe and retract
G1 X169.493 Y101.931 E-0.33164 ; wipe and retract
G1 X169.429 Y101.931 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X101.117 Y138.884 ; move to first perimeter point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.69007 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X50.706 Y116.308 E1.44687 ; perimeter
G1 X50.329 Y115.952 E0.02136 ; perimeter
G1 X50.013 Y115.575 E0.02029 ; perimeter
G1 X49.750 Y115.172 E0.01980 ; perimeter
G1 X49.545 Y114.754 E0.01918 ; perimeter
G1 X49.401 Y114.333 E0.01832 ; perimeter
G1 X49.308 Y113.834 E0.02092 ; perimeter
G1 X49.295 Y113.424 E0.01691 ; perimeter
G1 X49.341 Y113.034 E0.01619 ; perimeter
G1 X49.444 Y112.673 E0.01548 ; perimeter
G1 X49.600 Y112.345 E0.01496 ; perimeter
G1 X49.820 Y112.031 E0.01578 ; perimeter
G1 X50.710 Y110.971 E0.05702 ; perimeter
G1 X51.218 Y111.397 E0.02729 ; perimeter
G1 X50.453 Y112.308 E0.04901 ; perimeter
G1 X50.225 Y112.648 E0.01685 ; perimeter
G1 X50.060 Y113.059 E0.01826 ; perimeter
G1 X49.980 Y113.497 E0.01834 ; perimeter
G1 X49.984 Y113.945 E0.01847 ; perimeter
G1 X50.068 Y114.390 E0.01864 ; perimeter
G1 X50.225 Y114.819 E0.01884 ; perimeter
G1 X50.450 Y115.223 E0.01903 ; perimeter
G1 X50.734 Y115.591 E0.01917 ; perimeter
G1 X51.054 Y115.901 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.43866 ; perimeter
G1 X101.120 Y138.349 E0.96043 ; perimeter
G1 X101.117 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.511 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.68999 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03671 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X50.442 Y116.604 E1.45329 ; perimeter
G1 X50.040 Y116.225 E0.02279 ; perimeter
G1 X49.694 Y115.811 E0.02222 ; perimeter
G1 X49.405 Y115.369 E0.02177 ; perimeter
G1 X49.178 Y114.906 E0.02122 ; perimeter
G1 X49.017 Y114.435 E0.02053 ; perimeter
G1 X48.913 Y113.878 E0.02334 ; perimeter
G1 X48.897 Y113.407 E0.01940 ; perimeter
G1 X48.951 Y112.956 E0.01873 ; perimeter
G1 X49.072 Y112.532 E0.01813 ; perimeter
G1 X49.256 Y112.144 E0.01770 ; perimeter
G1 X49.506 Y111.789 E0.01787 ; perimeter
G1 X50.661 Y110.412 E0.07404 ; perimeter
G1 X51.776 Y111.348 E0.05995 ; perimeter
G1 X50.770 Y112.547 E0.06447 ; perimeter
G1 X50.577 Y112.834 E0.01426 ; perimeter
G1 X50.442 Y113.169 E0.01489 ; perimeter
G1 X50.376 Y113.531 E0.01513 ; perimeter
G1 X50.380 Y113.906 E0.01546 ; perimeter
G1 X50.451 Y114.284 E0.01584 ; perimeter
G1 X50.587 Y114.653 E0.01621 ; perimeter
G1 X50.782 Y115.004 E0.01654 ; perimeter
G1 X51.030 Y115.327 E0.01678 ; perimeter
G1 X51.319 Y115.607 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.43213 ; perimeter
G1 X101.518 Y137.952 E0.97090 ; perimeter
G1 X101.512 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.111 Y139.273 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.220 Y139.232 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X83.854 Y139.843 ; move to first infill point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.072 Y139.061 E0.05567 ; infill
G1 X82.388 Y139.061 E0.03448 ; infill
G1 X83.403 Y140.077 E0.07230 ; infill
G1 X82.718 Y140.077 E0.03448 ; infill
G1 X81.703 Y139.061 E0.07230 ; infill
G1 X81.018 Y139.061 E0.03448 ; infill
G1 X82.033 Y140.077 E0.07230 ; infill
G1 X81.348 Y140.077 E0.03448 ; infill
G1 X80.333 Y139.061 E0.07230 ; infill
G1 X79.971 Y139.061 E0.01821 ; infill
G1 X79.971 Y139.384 E0.01627 ; infill
G1 X80.663 Y140.077 E0.04930 ; infill
G1 X79.978 Y140.077 E0.03448 ; infill
G1 X79.770 Y139.868 E0.01483 ; infill
G1 F8640
G1 X79.978 Y140.077 E-0.06804 ; wipe and retract
G1 X80.663 Y140.077 E-0.15815 ; wipe and retract
G1 X79.971 Y139.384 E-0.22612 ; wipe and retract
G1 X79.971 Y139.061 E-0.07462 ; wipe and retract
G1 X80.333 Y139.061 E-0.08353 ; wipe and retract
G1 X80.791 Y139.519 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X57.242 Y109.525 ; move to first perimeter point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X54.629 Y107.331 E0.14056 ; perimeter
G1 X52.180 Y110.250 E0.15696 ; perimeter
G1 X51.672 Y109.824 E0.02729 ; perimeter
G1 X60.669 Y99.102 E0.57663 ; perimeter
G1 X61.177 Y99.528 E0.02729 ; perimeter
G1 X58.728 Y102.446 E0.15696 ; perimeter
G1 X61.342 Y104.639 E0.14056 ; perimeter
G1 X60.998 Y105.049 E0.02205 ; perimeter
G1 X58.384 Y102.856 E0.14056 ; perimeter
G1 X54.973 Y106.921 E0.21861 ; perimeter
G1 X57.587 Y109.115 E0.14056 ; perimeter
G1 X57.281 Y109.479 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.291 Y110.083 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X54.678 Y107.890 E0.14056 ; perimeter
G1 X52.229 Y110.809 E0.15696 ; perimeter
G1 X51.114 Y109.873 E0.05995 ; perimeter
G1 X60.621 Y98.543 E0.60929 ; perimeter
G1 X61.735 Y99.479 E0.05995 ; perimeter
G1 X59.286 Y102.397 E0.15696 ; perimeter
G1 X61.900 Y104.591 E0.14056 ; perimeter
G1 X61.046 Y105.608 E0.05471 ; perimeter
G1 X58.433 Y103.415 E0.14056 ; perimeter
G1 X55.531 Y106.873 E0.18596 ; perimeter
G1 X58.145 Y109.066 E0.14056 ; perimeter
G1 X57.330 Y110.037 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.019 Y109.790 F10800.000 ; move inwards before travel
G1 F8640
G1 X54.772 Y107.966 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X98.702 Y119.184 ; move to first perimeter point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.04695 ; perimeter
G1 X97.562 Y115.839 E0.13779 ; perimeter
G1 X98.702 Y115.839 E0.04695 ; perimeter
G1 X98.702 Y119.124 E0.13532 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.15621 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X65.404 Y98.799 E0.86313 ; perimeter
G1 X65.043 Y98.538 E0.01834 ; perimeter
G1 X64.631 Y98.323 E0.01917 ; perimeter
G1 X64.194 Y98.171 E0.01903 ; perimeter
G1 X63.744 Y98.091 E0.01884 ; perimeter
G1 X63.291 Y98.085 E0.01864 ; perimeter
G1 X62.849 Y98.159 E0.01847 ; perimeter
G1 X62.432 Y98.314 E0.01834 ; perimeter
G1 X62.218 Y98.447 E0.01039 ; perimeter
G1 X61.659 Y97.978 E0.03005 ; perimeter
G1 X61.945 Y97.775 E0.01444 ; perimeter
G1 X62.278 Y97.613 E0.01526 ; perimeter
G1 X62.742 Y97.481 E0.01987 ; perimeter
G1 X63.065 Y97.438 E0.01342 ; perimeter
G1 X63.501 Y97.439 E0.01798 ; perimeter
G1 X64.015 Y97.514 E0.02140 ; perimeter
G1 X64.460 Y97.642 E0.01905 ; perimeter
G1 X64.902 Y97.831 E0.01981 ; perimeter
G1 X65.313 Y98.068 E0.01956 ; perimeter
G1 X65.745 Y98.387 E0.02212 ; perimeter
G1 X81.649 Y111.732 E0.85525 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y115.443 E0.14840 ; perimeter
G1 X99.098 Y115.443 E0.07960 ; perimeter
G1 X99.098 Y119.520 E0.16798 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.17848 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X65.160 Y99.112 E0.86849 ; perimeter
G1 X64.834 Y98.876 E0.01657 ; perimeter
G1 X64.473 Y98.687 E0.01678 ; perimeter
G1 X64.094 Y98.556 E0.01654 ; perimeter
G1 X63.706 Y98.487 E0.01621 ; perimeter
G1 X63.322 Y98.482 E0.01584 ; perimeter
G1 X62.952 Y98.544 E0.01546 ; perimeter
G1 X62.607 Y98.672 E0.01513 ; perimeter
G1 X62.300 Y98.863 E0.01489 ; perimeter
G1 X62.205 Y98.954 E0.00544 ; perimeter
G1 X61.073 Y98.004 E0.06089 ; perimeter
G1 X61.392 Y97.682 E0.01867 ; perimeter
G1 X61.742 Y97.433 E0.01770 ; perimeter
G1 X62.136 Y97.241 E0.01805 ; perimeter
G1 X62.661 Y97.092 E0.02249 ; perimeter
G1 X63.039 Y97.042 E0.01569 ; perimeter
G1 X63.530 Y97.043 E0.02024 ; perimeter
G1 X64.099 Y97.126 E0.02369 ; perimeter
G1 X64.593 Y97.268 E0.02117 ; perimeter
G1 X65.079 Y97.476 E0.02178 ; perimeter
G1 X65.531 Y97.736 E0.02146 ; perimeter
G1 X65.990 Y98.076 E0.02356 ; perimeter
G1 X81.793 Y111.335 E0.84981 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y115.046 E0.14840 ; perimeter
G1 X99.494 Y115.046 E0.11226 ; perimeter
G1 X99.494 Y119.916 E0.20063 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.119 Y119.837 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.203 Y119.962 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X98.587 Y118.994 ; move to first infill point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7426.72
G1 X97.878 Y118.286 E0.05048 ; infill
G1 X97.878 Y117.600 E0.03454 ; infill
G1 X98.386 Y118.108 E0.03617 ; infill
G1 X98.386 Y117.422 E0.03454 ; infill
G1 X97.878 Y116.915 E0.03617 ; infill
G1 X97.878 Y116.229 E0.03454 ; infill
G1 X98.587 Y116.938 E0.05048 ; infill
G1 F8640
G1 X97.878 Y116.229 E-0.23134 ; wipe and retract
G1 X97.878 Y116.915 E-0.15829 ; wipe and retract
G1 X98.386 Y117.422 E-0.16575 ; wipe and retract
G1 X98.386 Y118.108 E-0.15829 ; wipe and retract
G1 X98.244 Y117.966 E-0.04633 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.627 Y124.952 E0.14391 ; perimeter
G1 X75.972 Y124.542 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.14391 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.648 Y116.585 E0.14391 ; perimeter
G1 X82.992 Y116.175 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.14391 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.069 Y125.000 E0.14391 ; perimeter
G1 X75.923 Y123.983 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.14391 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X82.090 Y116.634 E0.14391 ; perimeter
G1 X82.943 Y115.616 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.14391 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.438 Y116.175 E0.14391 ; perimeter
G1 X166.782 Y116.585 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.14391 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.458 Y124.542 E0.14391 ; perimeter
G1 X173.802 Y124.952 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.14391 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.486 Y115.616 E0.14391 ; perimeter
G1 X167.340 Y116.634 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.14391 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.507 Y123.983 E0.14391 ; perimeter
G1 X174.361 Y125.000 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.14391 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X150.728 Y119.184 ; move to first perimeter point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y115.839 E0.13779 ; perimeter
G1 X151.868 Y115.839 E0.04695 ; perimeter
G1 X151.868 Y119.184 E0.13779 ; perimeter
G1 X150.788 Y119.184 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.332 Y115.443 E0.17045 ; perimeter
G1 X152.264 Y115.443 E0.07960 ; perimeter
G1 X152.264 Y119.045 E0.14840 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X183.685 Y98.387 E0.85525 ; perimeter
G1 X184.116 Y98.068 E0.02212 ; perimeter
G1 X184.528 Y97.831 E0.01956 ; perimeter
G1 X184.970 Y97.642 E0.01981 ; perimeter
G1 X185.417 Y97.513 E0.01918 ; perimeter
G1 X185.857 Y97.444 E0.01832 ; perimeter
G1 X186.364 Y97.439 E0.02092 ; perimeter
G1 X186.774 Y97.498 E0.01703 ; perimeter
G1 X187.064 Y97.582 E0.01245 ; perimeter
G1 X187.490 Y97.779 E0.01935 ; perimeter
G1 X187.771 Y97.978 E0.01418 ; perimeter
G1 X187.212 Y98.447 E0.03005 ; perimeter
G1 X186.998 Y98.314 E0.01039 ; perimeter
G1 X186.580 Y98.159 E0.01834 ; perimeter
G1 X186.138 Y98.085 E0.01847 ; perimeter
G1 X185.686 Y98.091 E0.01864 ; perimeter
G1 X185.236 Y98.171 E0.01884 ; perimeter
G1 X184.799 Y98.323 E0.01903 ; perimeter
G1 X184.391 Y98.536 E0.01897 ; perimeter
G1 X184.131 Y98.718 E0.01310 ; perimeter
G1 X167.976 Y112.267 E0.86857 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X150.392 Y119.580 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.935 Y115.046 E0.20310 ; perimeter
G1 X152.660 Y115.046 E0.11226 ; perimeter
G1 X152.660 Y118.648 E0.14840 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X183.439 Y98.076 E0.84981 ; perimeter
G1 X183.899 Y97.736 E0.02356 ; perimeter
G1 X184.351 Y97.476 E0.02146 ; perimeter
G1 X184.837 Y97.268 E0.02178 ; perimeter
G1 X185.331 Y97.125 E0.02122 ; perimeter
G1 X185.824 Y97.048 E0.02053 ; perimeter
G1 X186.391 Y97.042 E0.02334 ; perimeter
G1 X186.858 Y97.109 E0.01944 ; perimeter
G1 X187.203 Y97.210 E0.01482 ; perimeter
G1 X187.690 Y97.434 E0.02208 ; perimeter
G1 X188.038 Y97.682 E0.01760 ; perimeter
G1 X188.357 Y98.004 E0.01867 ; perimeter
G1 X187.224 Y98.954 E0.06089 ; perimeter
G1 X187.129 Y98.863 E0.00544 ; perimeter
G1 X186.822 Y98.672 E0.01489 ; perimeter
G1 X186.478 Y98.544 E0.01513 ; perimeter
G1 X186.108 Y98.482 E0.01546 ; perimeter
G1 X185.723 Y98.487 E0.01584 ; perimeter
G1 X185.336 Y98.556 E0.01621 ; perimeter
G1 X184.957 Y98.687 E0.01654 ; perimeter
G1 X184.597 Y98.875 E0.01670 ; perimeter
G1 X184.372 Y99.033 E0.01133 ; perimeter
G1 X168.120 Y112.663 E0.87380 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X149.995 Y119.976 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.074 Y119.601 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.955 Y116.685 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X151.752 Y118.994 ; move to first infill point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7426.74
G1 X151.044 Y118.286 E0.05048 ; infill
G1 X151.044 Y117.600 E0.03454 ; infill
G1 X151.552 Y118.108 E0.03617 ; infill
G1 X151.552 Y117.422 E0.03454 ; infill
G1 X151.044 Y116.915 E0.03617 ; infill
G1 X151.044 Y116.229 E0.03454 ; infill
G1 X151.752 Y116.938 E0.05048 ; infill
G1 F8640
G1 X151.044 Y116.229 E-0.23134 ; wipe and retract
G1 X151.044 Y116.915 E-0.15829 ; wipe and retract
G1 X151.552 Y117.422 E-0.16575 ; wipe and retract
G1 X151.552 Y118.108 E-0.15829 ; wipe and retract
G1 X151.410 Y117.966 E-0.04633 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X192.187 Y109.525 ; move to first perimeter point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X191.843 Y109.115 E0.02205 ; perimeter
G1 X194.457 Y106.921 E0.14056 ; perimeter
G1 X191.046 Y102.856 E0.21861 ; perimeter
G1 X188.432 Y105.049 E0.14056 ; perimeter
G1 X188.088 Y104.639 E0.02205 ; perimeter
G1 X190.702 Y102.446 E0.14056 ; perimeter
G1 X188.253 Y99.528 E0.15696 ; perimeter
G1 X188.760 Y99.102 E0.02729 ; perimeter
G1 X197.758 Y109.824 E0.57663 ; perimeter
G1 X197.250 Y110.250 E0.02729 ; perimeter
G1 X194.801 Y107.331 E0.15696 ; perimeter
G1 X192.233 Y109.486 E0.13809 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.138 Y110.083 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X191.285 Y109.066 E0.05471 ; perimeter
G1 X193.898 Y106.873 E0.14056 ; perimeter
G1 X190.997 Y103.415 E0.18596 ; perimeter
G1 X188.383 Y105.608 E0.14056 ; perimeter
G1 X187.530 Y104.591 E0.05471 ; perimeter
G1 X190.143 Y102.397 E0.14056 ; perimeter
G1 X187.694 Y99.479 E0.15696 ; perimeter
G1 X188.809 Y98.543 E0.05995 ; perimeter
G1 X198.316 Y109.873 E0.60929 ; perimeter
G1 X197.201 Y110.809 E0.05995 ; perimeter
G1 X194.752 Y107.890 E0.15696 ; perimeter
G1 X192.184 Y110.045 E0.13809 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.181 Y109.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X191.285 Y109.066 E-0.30695 ; wipe and retract
G1 X192.788 Y107.805 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X148.313 Y138.884 ; move to first perimeter point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X148.310 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E0.96043 ; perimeter
G1 X198.376 Y115.901 E1.43866 ; perimeter
G1 X198.696 Y115.591 E0.01834 ; perimeter
G1 X198.980 Y115.223 E0.01918 ; perimeter
G1 X199.204 Y114.819 E0.01903 ; perimeter
G1 X199.362 Y114.390 E0.01884 ; perimeter
G1 X199.446 Y113.945 E0.01864 ; perimeter
G1 X199.450 Y113.497 E0.01847 ; perimeter
G1 X199.370 Y113.059 E0.01834 ; perimeter
G1 X199.207 Y112.652 E0.01804 ; perimeter
G1 X199.030 Y112.380 E0.01339 ; perimeter
G1 X198.211 Y111.398 E0.05269 ; perimeter
G1 X198.720 Y110.971 E0.02736 ; perimeter
G1 X199.609 Y112.031 E0.05702 ; perimeter
G1 X199.833 Y112.349 E0.01600 ; perimeter
G1 X199.985 Y112.671 E0.01469 ; perimeter
G1 X200.087 Y113.029 E0.01532 ; perimeter
G1 X200.136 Y113.509 E0.01987 ; perimeter
G1 X200.122 Y113.834 E0.01342 ; perimeter
G1 X200.046 Y114.264 E0.01798 ; perimeter
G1 X199.883 Y114.757 E0.02140 ; perimeter
G1 X199.679 Y115.173 E0.01907 ; perimeter
G1 X199.436 Y115.546 E0.01836 ; perimeter
G1 X199.099 Y115.954 E0.02178 ; perimeter
G1 X198.724 Y116.308 E0.02128 ; perimeter
G1 X171.819 Y138.884 E1.44687 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X148.373 Y138.884 E0.68760 ; perimeter
M204 S1000 ; adjust acceleration
G1 X147.918 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X147.912 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E0.97090 ; perimeter
M73 Q61 S53
G1 X198.110 Y115.607 E1.43213 ; perimeter
G1 X198.399 Y115.327 E0.01657 ; perimeter
G1 X198.648 Y115.004 E0.01678 ; perimeter
G1 X198.843 Y114.653 E0.01654 ; perimeter
G1 X198.979 Y114.284 E0.01621 ; perimeter
G1 X199.050 Y113.906 E0.01584 ; perimeter
G1 X199.053 Y113.531 E0.01546 ; perimeter
G1 X198.987 Y113.169 E0.01513 ; perimeter
G1 X198.853 Y112.836 E0.01481 ; perimeter
G1 X198.711 Y112.615 E0.01082 ; perimeter
G1 X197.653 Y111.348 E0.06799 ; perimeter
G1 X198.768 Y110.412 E0.05998 ; perimeter
G1 X199.924 Y111.789 E0.07404 ; perimeter
G1 X200.174 Y112.146 E0.01795 ; perimeter
G1 X200.357 Y112.532 E0.01760 ; perimeter
G1 X200.478 Y112.954 E0.01807 ; perimeter
G1 X200.533 Y113.497 E0.02249 ; perimeter
G1 X200.517 Y113.878 E0.01569 ; perimeter
G1 X200.431 Y114.361 E0.02024 ; perimeter
G1 X200.251 Y114.907 E0.02369 ; perimeter
G1 X200.025 Y115.369 E0.02118 ; perimeter
G1 X199.756 Y115.781 E0.02028 ; perimeter
G1 X199.389 Y116.225 E0.02372 ; perimeter
G1 X198.987 Y116.604 E0.02276 ; perimeter
G1 X171.963 Y139.280 E1.45329 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X147.978 Y139.280 E0.68752 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.126 Y138.938 F10800.000 ; move inwards before travel
G1 F8640
G1 X147.912 Y137.952 E-0.30702 ; wipe and retract
G1 X149.873 Y137.952 E-0.45298 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
G1 X165.575 Y139.868 ; move to first infill point
G1 Z13.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.784 Y140.077 E0.01484 ; infill
G1 X166.469 Y140.077 E0.03448 ; infill
G1 X165.776 Y139.384 E0.04930 ; infill
G1 X165.776 Y139.061 E0.01627 ; infill
G1 X166.138 Y139.061 E0.01821 ; infill
G1 X167.153 Y140.077 E0.07230 ; infill
G1 X167.838 Y140.077 E0.03448 ; infill
G1 X166.823 Y139.061 E0.07230 ; infill
G1 X167.508 Y139.061 E0.03448 ; infill
G1 X168.523 Y140.077 E0.07230 ; infill
G1 X169.208 Y140.077 E0.03448 ; infill
G1 X168.193 Y139.061 E0.07230 ; infill
G1 X168.878 Y139.061 E0.03448 ; infill
G1 X169.660 Y139.843 E0.05567 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;13.5


G1 F8640
G1 X168.878 Y139.061 E-0.25535 ; wipe and retract
G1 X168.193 Y139.061 E-0.15815 ; wipe and retract
G1 X169.208 Y140.077 E-0.33164 ; wipe and retract
G1 X169.144 Y140.077 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z13.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;13.5
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X101.072 Y100.738 ; move to first perimeter point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.67647 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X50.857 Y78.050 E1.45408 ; perimeter
G1 X50.481 Y77.695 E0.02129 ; perimeter
G1 X50.166 Y77.318 E0.02023 ; perimeter
G1 X49.903 Y76.917 E0.01975 ; perimeter
G1 X49.698 Y76.500 E0.01914 ; perimeter
G1 X49.554 Y76.081 E0.01825 ; perimeter
G1 X49.458 Y75.569 E0.02145 ; perimeter
G1 X49.446 Y75.161 E0.01682 ; perimeter
G1 X49.493 Y74.772 E0.01614 ; perimeter
G1 X49.596 Y74.412 E0.01543 ; perimeter
G1 X49.752 Y74.085 E0.01492 ; perimeter
G1 X49.971 Y73.772 E0.01574 ; perimeter
G1 X50.861 Y72.712 E0.05702 ; perimeter
G1 X51.369 Y73.138 E0.02729 ; perimeter
G1 X50.604 Y74.049 E0.04901 ; perimeter
G1 X50.376 Y74.389 E0.01685 ; perimeter
G1 X50.211 Y74.800 E0.01826 ; perimeter
G1 X50.131 Y75.238 E0.01834 ; perimeter
G1 X50.135 Y75.686 E0.01847 ; perimeter
G1 X50.219 Y76.131 E0.01864 ; perimeter
G1 X50.376 Y76.560 E0.01884 ; perimeter
G1 X50.601 Y76.964 E0.01903 ; perimeter
G1 X50.885 Y77.333 E0.01917 ; perimeter
G1 X51.205 Y77.642 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.44587 ; perimeter
G1 X101.072 Y100.203 E0.94674 ; perimeter
G1 X101.072 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.468 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.67646 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03671 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X50.593 Y78.346 E1.46050 ; perimeter
G1 X50.192 Y77.967 E0.02272 ; perimeter
G1 X49.847 Y77.555 E0.02215 ; perimeter
G1 X49.558 Y77.114 E0.02172 ; perimeter
G1 X49.332 Y76.653 E0.02117 ; perimeter
G1 X49.170 Y76.183 E0.02047 ; perimeter
G1 X49.063 Y75.612 E0.02391 ; perimeter
G1 X49.049 Y75.143 E0.01933 ; perimeter
G1 X49.103 Y74.693 E0.01867 ; perimeter
G1 X49.224 Y74.271 E0.01808 ; perimeter
G1 X49.408 Y73.884 E0.01765 ; perimeter
G1 X49.657 Y73.531 E0.01782 ; perimeter
G1 X50.812 Y72.154 E0.07405 ; perimeter
G1 X51.927 Y73.089 E0.05995 ; perimeter
G1 X50.921 Y74.288 E0.06447 ; perimeter
G1 X50.728 Y74.575 E0.01426 ; perimeter
G1 X50.593 Y74.911 E0.01489 ; perimeter
G1 X50.527 Y75.272 E0.01513 ; perimeter
G1 X50.531 Y75.647 E0.01546 ; perimeter
G1 X50.602 Y76.025 E0.01584 ; perimeter
G1 X50.738 Y76.395 E0.01621 ; perimeter
G1 X50.933 Y76.745 E0.01654 ; perimeter
G1 X51.181 Y77.068 E0.01678 ; perimeter
G1 X51.470 Y77.348 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.43934 ; perimeter
G1 X101.469 Y99.806 E0.95713 ; perimeter
G1 X101.468 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.068 Y101.127 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.177 Y101.086 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X83.730 Y102.131 ; move to first infill point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.939 Y101.923 E0.01484 ; infill
G1 X83.939 Y101.238 E0.03448 ; infill
G1 X83.246 Y101.931 E0.04931 ; infill
G1 X82.561 Y101.931 E0.03448 ; infill
G1 X83.577 Y100.915 E0.07230 ; infill
G1 X82.892 Y100.915 E0.03448 ; infill
G1 X81.876 Y101.931 E0.07230 ; infill
G1 X81.191 Y101.931 E0.03448 ; infill
G1 X82.207 Y100.915 E0.07230 ; infill
G1 X81.522 Y100.915 E0.03448 ; infill
G1 X80.506 Y101.931 E0.07230 ; infill
G1 X80.256 Y101.931 E0.01260 ; infill
G1 X80.256 Y101.496 E0.02188 ; infill
G1 X81.038 Y100.714 E0.05566 ; infill
G1 F8640
G1 X80.256 Y101.496 E-0.25530 ; wipe and retract
G1 X80.256 Y101.931 E-0.10036 ; wipe and retract
G1 X80.506 Y101.931 E-0.05779 ; wipe and retract
G1 X81.522 Y100.915 E-0.33164 ; wipe and retract
G1 X81.587 Y100.915 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X57.388 Y71.262 ; move to first perimeter point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X54.780 Y69.073 E0.14029 ; perimeter
G1 X52.331 Y71.991 E0.15696 ; perimeter
G1 X51.823 Y71.566 E0.02729 ; perimeter
G1 X60.820 Y60.843 E0.57663 ; perimeter
G1 X61.328 Y61.269 E0.02729 ; perimeter
G1 X58.879 Y64.188 E0.15696 ; perimeter
G1 X61.488 Y66.377 E0.14029 ; perimeter
G1 X61.144 Y66.787 E0.02205 ; perimeter
G1 X58.535 Y64.598 E0.14029 ; perimeter
G1 X55.124 Y68.663 E0.21861 ; perimeter
G1 X57.733 Y70.852 E0.14029 ; perimeter
G1 X57.427 Y71.216 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.437 Y71.820 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X54.829 Y69.631 E0.14029 ; perimeter
G1 X52.380 Y72.550 E0.15696 ; perimeter
G1 X51.265 Y71.614 E0.05995 ; perimeter
G1 X60.772 Y60.285 E0.60929 ; perimeter
G1 X61.886 Y61.220 E0.05995 ; perimeter
G1 X59.437 Y64.139 E0.15696 ; perimeter
G1 X62.046 Y66.328 E0.14029 ; perimeter
G1 X61.193 Y67.345 E0.05471 ; perimeter
G1 X58.584 Y65.156 E0.14029 ; perimeter
G1 X55.682 Y68.614 E0.18596 ; perimeter
G1 X58.291 Y70.803 E0.14029 ; perimeter
G1 X57.476 Y71.774 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.165 Y71.527 F10800.000 ; move inwards before travel
G1 F8640
G1 X54.918 Y69.703 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X98.987 Y81.038 ; move to first perimeter point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.04695 ; perimeter
G1 X97.847 Y77.518 E0.14500 ; perimeter
G1 X98.987 Y77.518 E0.04695 ; perimeter
M73 P62 R51
G1 X98.987 Y80.978 E0.14253 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.15621 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X65.555 Y60.541 E0.87034 ; perimeter
G1 X65.194 Y60.280 E0.01834 ; perimeter
G1 X64.782 Y60.064 E0.01917 ; perimeter
G1 X64.345 Y59.913 E0.01903 ; perimeter
G1 X63.895 Y59.832 E0.01884 ; perimeter
G1 X63.442 Y59.827 E0.01864 ; perimeter
G1 X63.000 Y59.901 E0.01847 ; perimeter
G1 X62.583 Y60.055 E0.01834 ; perimeter
G1 X62.369 Y60.188 E0.01039 ; perimeter
G1 X61.810 Y59.720 E0.03005 ; perimeter
G1 X62.094 Y59.518 E0.01436 ; perimeter
G1 X62.425 Y59.356 E0.01519 ; perimeter
G1 X62.902 Y59.221 E0.02040 ; perimeter
G1 X63.210 Y59.180 E0.01279 ; perimeter
G1 X63.644 Y59.180 E0.01791 ; perimeter
G1 X64.172 Y59.257 E0.02196 ; perimeter
G1 X64.614 Y59.385 E0.01898 ; perimeter
G1 X65.056 Y59.574 E0.01977 ; perimeter
G1 X65.451 Y59.801 E0.01878 ; perimeter
G1 X65.897 Y60.129 E0.02280 ; perimeter
G1 X81.934 Y73.586 E0.86242 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y77.121 E0.15561 ; perimeter
G1 X99.383 Y77.121 E0.07960 ; perimeter
G1 X99.383 Y81.374 E0.17519 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.17848 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X65.311 Y60.853 E0.87570 ; perimeter
G1 X64.985 Y60.618 E0.01657 ; perimeter
G1 X64.624 Y60.429 E0.01678 ; perimeter
G1 X64.245 Y60.297 E0.01654 ; perimeter
G1 X63.857 Y60.228 E0.01621 ; perimeter
G1 X63.473 Y60.223 E0.01584 ; perimeter
G1 X63.103 Y60.285 E0.01546 ; perimeter
G1 X62.758 Y60.413 E0.01513 ; perimeter
G1 X62.451 Y60.604 E0.01489 ; perimeter
G1 X62.356 Y60.695 E0.00544 ; perimeter
G1 X61.224 Y59.745 E0.06089 ; perimeter
G1 X61.542 Y59.424 E0.01862 ; perimeter
G1 X61.891 Y59.176 E0.01765 ; perimeter
G1 X62.284 Y58.984 E0.01799 ; perimeter
G1 X62.822 Y58.832 E0.02303 ; perimeter
G1 X63.183 Y58.784 E0.01504 ; perimeter
G1 X63.673 Y58.784 E0.02017 ; perimeter
G1 X64.256 Y58.868 E0.02428 ; perimeter
G1 X64.748 Y59.011 E0.02111 ; perimeter
G1 X65.233 Y59.219 E0.02172 ; perimeter
G1 X65.668 Y59.469 E0.02066 ; perimeter
G1 X66.142 Y59.817 E0.02424 ; perimeter
G1 X82.078 Y73.189 E0.85701 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y76.725 E0.15561 ; perimeter
G1 X99.780 Y76.725 E0.11226 ; perimeter
G1 X99.780 Y81.770 E0.20784 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.405 Y81.689 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.488 Y81.816 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X97.962 Y80.804 ; move to first infill point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7123.55
G1 X98.671 Y80.096 E0.05263 ; infill
G1 X98.671 Y79.381 E0.03754 ; infill
G1 X98.163 Y79.889 E0.03771 ; infill
G1 X98.163 Y79.174 E0.03754 ; infill
G1 X98.671 Y78.666 E0.03771 ; infill
G1 X98.671 Y77.952 E0.03754 ; infill
G1 X97.962 Y78.660 E0.05263 ; infill
G1 F8640
G1 X98.671 Y77.952 E-0.23134 ; wipe and retract
G1 X98.671 Y78.666 E-0.16503 ; wipe and retract
G1 X98.163 Y79.174 E-0.16575 ; wipe and retract
G1 X98.163 Y79.889 E-0.16503 ; wipe and retract
G1 X98.264 Y79.788 E-0.03285 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X75.975 Y86.858 E0.14056 ; perimeter
G1 X76.319 Y86.448 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.14056 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X82.995 Y78.491 E0.14056 ; perimeter
G1 X83.339 Y78.081 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.14056 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.416 Y86.906 E0.14056 ; perimeter
G1 X76.270 Y85.889 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.14056 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.437 Y78.540 E0.14056 ; perimeter
G1 X83.291 Y77.522 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.14056 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X164.047 Y80.274 ; move to first perimeter point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X166.661 Y78.081 E0.14056 ; perimeter
G1 X167.005 Y78.491 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.14056 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.681 Y86.448 E0.14056 ; perimeter
G1 X174.025 Y86.858 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.14056 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.450 Y92.314 E0.02205 ; perimeter
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.008 Y80.228 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X166.566 Y78.157 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X173.401 Y92.872 ; move to first perimeter point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X166.709 Y77.522 E0.14056 ; perimeter
G1 X167.563 Y78.540 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.14056 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X173.730 Y85.889 E0.14056 ; perimeter
G1 X174.584 Y86.906 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.14056 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X151.013 Y81.038 ; move to first perimeter point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y77.518 E0.14500 ; perimeter
G1 X152.153 Y77.518 E0.04695 ; perimeter
G1 X152.153 Y81.038 E0.14500 ; perimeter
G1 X151.073 Y81.038 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.617 Y77.121 E0.17766 ; perimeter
G1 X152.549 Y77.121 E0.07960 ; perimeter
G1 X152.549 Y80.899 E0.15561 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X184.103 Y60.129 E0.86242 ; perimeter
G1 X184.549 Y59.801 E0.02280 ; perimeter
G1 X184.944 Y59.574 E0.01878 ; perimeter
G1 X185.386 Y59.385 E0.01977 ; perimeter
G1 X185.832 Y59.255 E0.01914 ; perimeter
G1 X186.269 Y59.187 E0.01825 ; perimeter
G1 X186.790 Y59.181 E0.02146 ; perimeter
G1 X187.198 Y59.240 E0.01696 ; perimeter
G1 X187.473 Y59.321 E0.01184 ; perimeter
G1 X187.912 Y59.522 E0.01987 ; perimeter
G1 X188.190 Y59.720 E0.01406 ; perimeter
G1 X187.631 Y60.188 E0.03005 ; perimeter
G1 X187.417 Y60.055 E0.01039 ; perimeter
G1 X187.000 Y59.901 E0.01834 ; perimeter
G1 X186.558 Y59.827 E0.01847 ; perimeter
G1 X186.105 Y59.832 E0.01864 ; perimeter
G1 X185.655 Y59.913 E0.01884 ; perimeter
G1 X185.218 Y60.064 E0.01903 ; perimeter
G1 X184.810 Y60.277 E0.01898 ; perimeter
G1 X184.546 Y60.463 E0.01329 ; perimeter
G1 X168.261 Y74.121 E0.87558 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X150.677 Y81.434 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X150.220 Y76.725 E0.21032 ; perimeter
G1 X152.945 Y76.725 E0.11226 ; perimeter
G1 X152.945 Y80.502 E0.15561 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X183.858 Y59.817 E0.85701 ; perimeter
G1 X184.332 Y59.469 E0.02424 ; perimeter
G1 X184.767 Y59.219 E0.02066 ; perimeter
G1 X185.252 Y59.011 E0.02172 ; perimeter
G1 X185.745 Y58.868 E0.02117 ; perimeter
G1 X186.236 Y58.791 E0.02047 ; perimeter
G1 X186.817 Y58.784 E0.02391 ; perimeter
G1 X187.282 Y58.852 E0.01938 ; perimeter
G1 X187.612 Y58.948 E0.01418 ; perimeter
G1 X188.111 Y59.177 E0.02260 ; perimeter
G1 X188.458 Y59.424 E0.01754 ; perimeter
G1 X188.776 Y59.745 E0.01862 ; perimeter
G1 X187.644 Y60.695 E0.06089 ; perimeter
G1 X187.549 Y60.604 E0.00544 ; perimeter
G1 X187.242 Y60.413 E0.01489 ; perimeter
G1 X186.897 Y60.285 E0.01513 ; perimeter
G1 X186.527 Y60.223 E0.01546 ; perimeter
G1 X186.143 Y60.228 E0.01584 ; perimeter
G1 X185.755 Y60.297 E0.01621 ; perimeter
G1 X185.376 Y60.429 E0.01654 ; perimeter
G1 X185.017 Y60.617 E0.01671 ; perimeter
G1 X184.788 Y60.777 E0.01152 ; perimeter
G1 X168.405 Y74.517 E0.88082 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X150.280 Y81.830 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.359 Y81.455 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.242 Y78.539 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X151.128 Y80.804 ; move to first infill point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7123.56
G1 X151.837 Y80.096 E0.05263 ; infill
G1 X151.837 Y79.381 E0.03754 ; infill
G1 X151.329 Y79.889 E0.03771 ; infill
G1 X151.329 Y79.174 E0.03754 ; infill
G1 X151.837 Y78.666 E0.03771 ; infill
G1 X151.837 Y77.952 E0.03754 ; infill
G1 X151.128 Y78.660 E0.05263 ; infill
G1 F8640
G1 X151.837 Y77.952 E-0.23134 ; wipe and retract
G1 X151.837 Y78.666 E-0.16502 ; wipe and retract
G1 X151.329 Y79.174 E-0.16575 ; wipe and retract
G1 X151.329 Y79.889 E-0.16502 ; wipe and retract
G1 X151.430 Y79.788 E-0.03285 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X192.612 Y71.262 ; move to first perimeter point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X192.267 Y70.852 E0.02205 ; perimeter
G1 X194.876 Y68.663 E0.14029 ; perimeter
G1 X191.465 Y64.598 E0.21861 ; perimeter
G1 X188.856 Y66.787 E0.14029 ; perimeter
G1 X188.512 Y66.377 E0.02205 ; perimeter
G1 X191.121 Y64.188 E0.14029 ; perimeter
G1 X188.672 Y61.269 E0.15696 ; perimeter
G1 X189.180 Y60.843 E0.02729 ; perimeter
G1 X198.177 Y71.566 E0.57663 ; perimeter
G1 X197.669 Y71.991 E0.02729 ; perimeter
G1 X195.220 Y69.073 E0.15696 ; perimeter
G1 X192.657 Y71.223 E0.13782 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.563 Y71.820 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X191.709 Y70.803 E0.05471 ; perimeter
G1 X194.318 Y68.614 E0.14029 ; perimeter
G1 X191.416 Y65.156 E0.18596 ; perimeter
G1 X188.807 Y67.345 E0.14029 ; perimeter
G1 X187.954 Y66.328 E0.05471 ; perimeter
G1 X190.563 Y64.139 E0.14029 ; perimeter
G1 X188.114 Y61.220 E0.15696 ; perimeter
G1 X189.228 Y60.285 E0.05995 ; perimeter
G1 X198.735 Y71.614 E0.60929 ; perimeter
G1 X197.620 Y72.550 E0.05995 ; perimeter
G1 X195.171 Y69.631 E0.15696 ; perimeter
G1 X192.609 Y71.782 E0.13782 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.605 Y71.422 F10800.000 ; move inwards before travel
G1 F8640
G1 X191.709 Y70.803 E-0.30695 ; wipe and retract
G1 X193.212 Y69.542 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X148.928 Y100.738 ; move to first perimeter point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X148.928 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E0.94674 ; perimeter
G1 X198.795 Y77.642 E1.44587 ; perimeter
G1 X199.115 Y77.333 E0.01834 ; perimeter
G1 X199.399 Y76.964 E0.01918 ; perimeter
G1 X199.624 Y76.560 E0.01903 ; perimeter
G1 X199.781 Y76.131 E0.01884 ; perimeter
G1 X199.865 Y75.686 E0.01864 ; perimeter
G1 X199.869 Y75.238 E0.01847 ; perimeter
G1 X199.789 Y74.800 E0.01834 ; perimeter
G1 X199.626 Y74.394 E0.01805 ; perimeter
G1 X199.447 Y74.118 E0.01353 ; perimeter
G1 X198.630 Y73.139 E0.05254 ; perimeter
G1 X199.139 Y72.712 E0.02736 ; perimeter
G1 X200.029 Y73.772 E0.05702 ; perimeter
G1 X200.251 Y74.089 E0.01595 ; perimeter
G1 X200.403 Y74.410 E0.01465 ; perimeter
G1 X200.505 Y74.766 E0.01525 ; perimeter
G1 X200.555 Y75.259 E0.02040 ; perimeter
G1 X200.542 Y75.569 E0.01279 ; perimeter
G1 X200.467 Y75.997 E0.01791 ; perimeter
G1 X200.300 Y76.504 E0.02196 ; perimeter
G1 X200.096 Y76.918 E0.01901 ; perimeter
G1 X199.863 Y77.276 E0.01761 ; perimeter
G1 X199.517 Y77.697 E0.02244 ; perimeter
G1 X199.143 Y78.050 E0.02118 ; perimeter
G1 X172.104 Y100.738 E1.45408 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X148.988 Y100.738 E0.67400 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.532 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X148.531 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E0.95713 ; perimeter
G1 X198.530 Y77.348 E1.43934 ; perimeter
G1 X198.819 Y77.068 E0.01657 ; perimeter
G1 X199.067 Y76.745 E0.01678 ; perimeter
G1 X199.262 Y76.395 E0.01654 ; perimeter
G1 X199.398 Y76.025 E0.01621 ; perimeter
G1 X199.469 Y75.647 E0.01584 ; perimeter
G1 X199.473 Y75.272 E0.01546 ; perimeter
G1 X199.407 Y74.911 E0.01513 ; perimeter
G1 X199.273 Y74.577 E0.01481 ; perimeter
G1 X199.128 Y74.354 E0.01096 ; perimeter
G1 X198.072 Y73.090 E0.06785 ; perimeter
G1 X199.188 Y72.154 E0.05997 ; perimeter
G1 X200.343 Y73.531 E0.07405 ; perimeter
G1 X200.593 Y73.886 E0.01790 ; perimeter
G1 X200.776 Y74.271 E0.01755 ; perimeter
G1 X200.896 Y74.691 E0.01801 ; perimeter
G1 X200.953 Y75.247 E0.02303 ; perimeter
G1 X200.937 Y75.612 E0.01504 ; perimeter
G1 X200.852 Y76.094 E0.02017 ; perimeter
G1 X200.668 Y76.654 E0.02428 ; perimeter
G1 X200.442 Y77.114 E0.02112 ; perimeter
G1 X200.183 Y77.511 E0.01950 ; perimeter
G1 X199.807 Y77.968 E0.02439 ; perimeter
G1 X199.407 Y78.346 E0.02268 ; perimeter
G1 X172.248 Y101.134 E1.46050 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X148.592 Y101.134 E0.67399 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.741 Y100.793 F10800.000 ; move inwards before travel
G1 F8640
G1 X148.531 Y99.806 E-0.30696 ; wipe and retract
G1 X150.493 Y99.806 E-0.45304 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X166.843 Y100.714 ; move to first infill point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.061 Y101.496 E0.05566 ; infill
G1 X166.061 Y101.931 E0.02188 ; infill
G1 X166.312 Y101.931 E0.01260 ; infill
G1 X167.327 Y100.915 E0.07230 ; infill
G1 X168.012 Y100.915 E0.03448 ; infill
G1 X166.996 Y101.931 E0.07230 ; infill
G1 X167.681 Y101.931 E0.03448 ; infill
G1 X168.697 Y100.915 E0.07230 ; infill
G1 X169.382 Y100.915 E0.03448 ; infill
G1 X168.366 Y101.931 E0.07230 ; infill
G1 X169.051 Y101.931 E0.03448 ; infill
G1 X169.744 Y101.238 E0.04931 ; infill
G1 X169.744 Y101.923 E0.03448 ; infill
G1 X169.535 Y102.131 E0.01484 ; infill
G1 F8640
G1 X169.744 Y101.923 E-0.06809 ; wipe and retract
G1 X169.744 Y101.238 E-0.15815 ; wipe and retract
G1 X169.051 Y101.931 E-0.22616 ; wipe and retract
G1 X168.366 Y101.931 E-0.15815 ; wipe and retract
G1 X168.824 Y101.473 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X100.787 Y138.884 ; move to first perimeter point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.67647 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X50.572 Y116.196 E1.45408 ; perimeter
G1 X50.196 Y115.841 E0.02129 ; perimeter
G1 X49.881 Y115.465 E0.02023 ; perimeter
G1 X49.618 Y115.063 E0.01975 ; perimeter
G1 X49.413 Y114.646 E0.01914 ; perimeter
G1 X49.269 Y114.227 E0.01825 ; perimeter
G1 X49.173 Y113.715 E0.02145 ; perimeter
G1 X49.161 Y113.307 E0.01682 ; perimeter
G1 X49.208 Y112.918 E0.01614 ; perimeter
G1 X49.311 Y112.558 E0.01543 ; perimeter
G1 X49.466 Y112.231 E0.01492 ; perimeter
G1 X49.686 Y111.919 E0.01574 ; perimeter
G1 X50.576 Y110.858 E0.05702 ; perimeter
G1 X51.084 Y111.284 E0.02729 ; perimeter
G1 X50.319 Y112.196 E0.04901 ; perimeter
G1 X50.091 Y112.535 E0.01685 ; perimeter
G1 X49.925 Y112.946 E0.01826 ; perimeter
G1 X49.845 Y113.384 E0.01834 ; perimeter
G1 X49.850 Y113.832 E0.01847 ; perimeter
G1 X49.933 Y114.277 E0.01864 ; perimeter
G1 X50.091 Y114.706 E0.01884 ; perimeter
G1 X50.316 Y115.110 E0.01903 ; perimeter
G1 X50.600 Y115.479 E0.01917 ; perimeter
G1 X50.919 Y115.788 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.44587 ; perimeter
G1 X100.787 Y138.349 E0.94674 ; perimeter
G1 X100.787 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.183 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.67646 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03671 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X50.308 Y116.492 E1.46050 ; perimeter
G1 X49.907 Y116.113 E0.02272 ; perimeter
G1 X49.562 Y115.701 E0.02215 ; perimeter
G1 X49.273 Y115.260 E0.02172 ; perimeter
G1 X49.046 Y114.799 E0.02117 ; perimeter
G1 X48.885 Y114.329 E0.02047 ; perimeter
G1 X48.778 Y113.758 E0.02391 ; perimeter
G1 X48.764 Y113.289 E0.01933 ; perimeter
G1 X48.818 Y112.839 E0.01867 ; perimeter
G1 X48.939 Y112.418 E0.01808 ; perimeter
G1 X49.123 Y112.031 E0.01765 ; perimeter
G1 X49.372 Y111.677 E0.01782 ; perimeter
G1 X50.527 Y110.300 E0.07405 ; perimeter
G1 X51.642 Y111.235 E0.05995 ; perimeter
G1 X50.636 Y112.434 E0.06447 ; perimeter
G1 X50.443 Y112.721 E0.01426 ; perimeter
G1 X50.308 Y113.057 E0.01489 ; perimeter
G1 X50.242 Y113.418 E0.01513 ; perimeter
G1 X50.246 Y113.794 E0.01546 ; perimeter
G1 X50.317 Y114.171 E0.01584 ; perimeter
G1 X50.452 Y114.541 E0.01621 ; perimeter
G1 X50.648 Y114.892 E0.01654 ; perimeter
G1 X50.896 Y115.214 E0.01678 ; perimeter
G1 X51.185 Y115.494 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.43934 ; perimeter
G1 X101.184 Y137.952 E0.95713 ; perimeter
G1 X101.183 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.783 Y139.273 F10800.000 ; move inwards before travel
G1 F8640
G1 X97.892 Y139.232 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X83.445 Y140.278 ; move to first infill point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.654 Y140.069 E0.01484 ; infill
G1 X83.654 Y139.384 E0.03448 ; infill
G1 X82.961 Y140.077 E0.04931 ; infill
G1 X82.276 Y140.077 E0.03448 ; infill
G1 X83.292 Y139.061 E0.07230 ; infill
G1 X82.607 Y139.061 E0.03448 ; infill
G1 X81.591 Y140.077 E0.07230 ; infill
G1 X80.906 Y140.077 E0.03448 ; infill
G1 X81.922 Y139.061 E0.07230 ; infill
G1 X81.237 Y139.061 E0.03448 ; infill
G1 X80.221 Y140.077 E0.07230 ; infill
G1 X79.971 Y140.077 E0.01260 ; infill
G1 X79.971 Y139.642 E0.02188 ; infill
G1 X80.753 Y138.860 E0.05566 ; infill
G1 F8640
G1 X79.971 Y139.642 E-0.25530 ; wipe and retract
G1 X79.971 Y140.077 E-0.10036 ; wipe and retract
G1 X80.221 Y140.077 E-0.05779 ; wipe and retract
G1 X81.237 Y139.061 E-0.33164 ; wipe and retract
G1 X81.301 Y139.061 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X57.103 Y109.408 ; move to first perimeter point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X54.495 Y107.219 E0.14029 ; perimeter
G1 X52.046 Y110.138 E0.15696 ; perimeter
G1 X51.538 Y109.712 E0.02729 ; perimeter
G1 X60.535 Y98.989 E0.57663 ; perimeter
G1 X61.043 Y99.415 E0.02729 ; perimeter
G1 X58.594 Y102.334 E0.15696 ; perimeter
G1 X61.203 Y104.523 E0.14029 ; perimeter
G1 X60.858 Y104.933 E0.02205 ; perimeter
G1 X58.250 Y102.744 E0.14029 ; perimeter
G1 X54.839 Y106.809 E0.21861 ; perimeter
G1 X57.447 Y108.998 E0.14029 ; perimeter
G1 X57.142 Y109.362 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.152 Y109.966 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X54.543 Y107.777 E0.14029 ; perimeter
G1 X52.094 Y110.696 E0.15696 ; perimeter
G1 X50.980 Y109.761 E0.05995 ; perimeter
G1 X60.486 Y98.431 E0.60929 ; perimeter
G1 X61.601 Y99.366 E0.05995 ; perimeter
G1 X59.152 Y102.285 E0.15696 ; perimeter
G1 X61.761 Y104.474 E0.14029 ; perimeter
G1 X60.907 Y105.491 E0.05471 ; perimeter
G1 X58.299 Y103.302 E0.14029 ; perimeter
G1 X55.397 Y106.760 E0.18596 ; perimeter
G1 X58.006 Y108.949 E0.14029 ; perimeter
G1 X57.191 Y109.920 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.880 Y109.673 F10800.000 ; move inwards before travel
G1 F8640
G1 X54.632 Y107.849 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X98.702 Y119.184 ; move to first perimeter point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q62 S52
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.04695 ; perimeter
G1 X97.562 Y115.664 E0.14500 ; perimeter
G1 X98.702 Y115.664 E0.04695 ; perimeter
G1 X98.702 Y119.124 E0.14253 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.15621 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X65.269 Y98.687 E0.87034 ; perimeter
G1 X64.909 Y98.426 E0.01834 ; perimeter
G1 X64.497 Y98.210 E0.01917 ; perimeter
G1 X64.060 Y98.059 E0.01903 ; perimeter
G1 X63.610 Y97.978 E0.01884 ; perimeter
G1 X63.157 Y97.973 E0.01864 ; perimeter
G1 X62.715 Y98.047 E0.01847 ; perimeter
G1 X62.298 Y98.201 E0.01834 ; perimeter
G1 X62.084 Y98.335 E0.01039 ; perimeter
G1 X61.525 Y97.866 E0.03005 ; perimeter
G1 X61.809 Y97.664 E0.01436 ; perimeter
G1 X62.140 Y97.502 E0.01519 ; perimeter
G1 X62.617 Y97.367 E0.02040 ; perimeter
G1 X62.924 Y97.327 E0.01279 ; perimeter
G1 X63.359 Y97.326 E0.01791 ; perimeter
G1 X63.887 Y97.403 E0.02196 ; perimeter
G1 X64.329 Y97.531 E0.01898 ; perimeter
G1 X64.770 Y97.720 E0.01977 ; perimeter
G1 X65.166 Y97.947 E0.01878 ; perimeter
G1 X65.612 Y98.275 E0.02280 ; perimeter
G1 X81.649 Y111.732 E0.86242 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y115.267 E0.15561 ; perimeter
G1 X99.098 Y115.267 E0.07960 ; perimeter
G1 X99.098 Y119.520 E0.17519 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.17848 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X65.026 Y99.000 E0.87570 ; perimeter
G1 X64.700 Y98.764 E0.01657 ; perimeter
G1 X64.339 Y98.575 E0.01678 ; perimeter
G1 X63.960 Y98.444 E0.01654 ; perimeter
G1 X63.572 Y98.374 E0.01621 ; perimeter
G1 X63.188 Y98.370 E0.01584 ; perimeter
G1 X62.818 Y98.431 E0.01546 ; perimeter
G1 X62.473 Y98.559 E0.01513 ; perimeter
G1 X62.166 Y98.750 E0.01489 ; perimeter
G1 X62.071 Y98.842 E0.00544 ; perimeter
G1 X60.939 Y97.891 E0.06089 ; perimeter
G1 X61.257 Y97.570 E0.01862 ; perimeter
G1 X61.606 Y97.322 E0.01765 ; perimeter
G1 X61.998 Y97.130 E0.01799 ; perimeter
G1 X62.536 Y96.978 E0.02303 ; perimeter
G1 X62.898 Y96.930 E0.01504 ; perimeter
G1 X63.388 Y96.930 E0.02017 ; perimeter
G1 X63.971 Y97.014 E0.02428 ; perimeter
G1 X64.463 Y97.157 E0.02111 ; perimeter
G1 X64.948 Y97.365 E0.02172 ; perimeter
G1 X65.382 Y97.615 E0.02066 ; perimeter
G1 X65.857 Y97.963 E0.02424 ; perimeter
G1 X81.793 Y111.335 E0.85701 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y114.871 E0.15561 ; perimeter
G1 X99.494 Y114.871 E0.11226 ; perimeter
G1 X99.494 Y119.916 E0.20784 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.120 Y119.835 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.203 Y119.962 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X97.677 Y118.950 ; move to first infill point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7123.55
G1 X98.386 Y118.242 E0.05263 ; infill
G1 X98.386 Y117.527 E0.03754 ; infill
G1 X97.878 Y118.035 E0.03771 ; infill
G1 X97.878 Y117.320 E0.03754 ; infill
G1 X98.386 Y116.813 E0.03771 ; infill
G1 X98.386 Y116.098 E0.03754 ; infill
G1 X97.677 Y116.806 E0.05263 ; infill
G1 F8640
G1 X98.386 Y116.098 E-0.23134 ; wipe and retract
G1 X98.386 Y116.813 E-0.16503 ; wipe and retract
G1 X97.878 Y117.320 E-0.16575 ; wipe and retract
G1 X97.878 Y118.035 E-0.16503 ; wipe and retract
G1 X97.979 Y117.934 E-0.03285 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.690 Y125.004 E0.14056 ; perimeter
G1 X76.034 Y124.594 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.14056 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.710 Y116.637 E0.14056 ; perimeter
G1 X83.054 Y116.227 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.14056 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.131 Y125.053 E0.14056 ; perimeter
G1 X75.985 Y124.035 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.14056 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X82.152 Y116.686 E0.14056 ; perimeter
G1 X83.005 Y115.669 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.14056 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X163.762 Y118.420 ; move to first perimeter point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X166.375 Y116.227 E0.14056 ; perimeter
G1 X166.719 Y116.637 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.14056 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.396 Y124.594 E0.14056 ; perimeter
G1 X173.740 Y125.004 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.14056 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.165 Y130.460 E0.02205 ; perimeter
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.723 Y118.374 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X166.281 Y116.303 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X173.116 Y131.018 ; move to first perimeter point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.424 Y115.669 E0.14056 ; perimeter
G1 X167.278 Y116.686 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.14056 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.445 Y124.035 E0.14056 ; perimeter
G1 X174.298 Y125.053 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.14056 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X150.728 Y119.184 ; move to first perimeter point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y115.664 E0.14500 ; perimeter
G1 X151.868 Y115.664 E0.04695 ; perimeter
G1 X151.868 Y119.184 E0.14500 ; perimeter
G1 X150.788 Y119.184 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.332 Y115.267 E0.17766 ; perimeter
G1 X152.264 Y115.267 E0.07960 ; perimeter
G1 X152.264 Y119.045 E0.15561 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X183.818 Y98.275 E0.86242 ; perimeter
G1 X184.264 Y97.947 E0.02280 ; perimeter
G1 X184.659 Y97.720 E0.01878 ; perimeter
G1 X185.100 Y97.531 E0.01977 ; perimeter
G1 X185.546 Y97.402 E0.01914 ; perimeter
G1 X185.984 Y97.333 E0.01825 ; perimeter
G1 X186.505 Y97.327 E0.02146 ; perimeter
G1 X186.912 Y97.386 E0.01696 ; perimeter
G1 X187.188 Y97.467 E0.01184 ; perimeter
G1 X187.627 Y97.668 E0.01987 ; perimeter
G1 X187.905 Y97.866 E0.01406 ; perimeter
G1 X187.346 Y98.335 E0.03005 ; perimeter
G1 X187.132 Y98.201 E0.01039 ; perimeter
G1 X186.715 Y98.047 E0.01834 ; perimeter
G1 X186.272 Y97.973 E0.01847 ; perimeter
G1 X185.820 Y97.978 E0.01864 ; perimeter
G1 X185.370 Y98.059 E0.01884 ; perimeter
G1 X184.933 Y98.210 E0.01903 ; perimeter
G1 X184.525 Y98.424 E0.01898 ; perimeter
G1 X184.261 Y98.609 E0.01329 ; perimeter
G1 X167.976 Y112.267 E0.87558 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X150.392 Y119.580 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.935 Y114.871 E0.21032 ; perimeter
G1 X152.660 Y114.871 E0.11226 ; perimeter
G1 X152.660 Y118.648 E0.15561 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
M73 P62 R50
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X183.573 Y97.963 E0.85701 ; perimeter
G1 X184.047 Y97.615 E0.02424 ; perimeter
G1 X184.482 Y97.365 E0.02066 ; perimeter
G1 X184.967 Y97.157 E0.02172 ; perimeter
G1 X185.460 Y97.014 E0.02117 ; perimeter
G1 X185.951 Y96.937 E0.02047 ; perimeter
G1 X186.531 Y96.930 E0.02391 ; perimeter
G1 X186.997 Y96.998 E0.01938 ; perimeter
G1 X187.327 Y97.094 E0.01418 ; perimeter
G1 X187.826 Y97.323 E0.02260 ; perimeter
G1 X188.173 Y97.570 E0.01754 ; perimeter
G1 X188.491 Y97.891 E0.01862 ; perimeter
G1 X187.358 Y98.842 E0.06089 ; perimeter
G1 X187.263 Y98.750 E0.00544 ; perimeter
G1 X186.957 Y98.559 E0.01489 ; perimeter
G1 X186.612 Y98.431 E0.01513 ; perimeter
G1 X186.242 Y98.370 E0.01546 ; perimeter
G1 X185.857 Y98.374 E0.01584 ; perimeter
G1 X185.470 Y98.444 E0.01621 ; perimeter
G1 X185.091 Y98.575 E0.01654 ; perimeter
G1 X184.731 Y98.763 E0.01671 ; perimeter
G1 X184.502 Y98.923 E0.01152 ; perimeter
G1 X168.120 Y112.663 E0.88082 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X149.995 Y119.976 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.074 Y119.601 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.957 Y116.685 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X150.843 Y118.950 ; move to first infill point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7123.56
G1 X151.552 Y118.242 E0.05263 ; infill
G1 X151.552 Y117.527 E0.03754 ; infill
G1 X151.044 Y118.035 E0.03771 ; infill
G1 X151.044 Y117.320 E0.03754 ; infill
G1 X151.552 Y116.813 E0.03771 ; infill
G1 X151.552 Y116.098 E0.03754 ; infill
G1 X150.843 Y116.806 E0.05263 ; infill
G1 F8640
G1 X151.552 Y116.098 E-0.23134 ; wipe and retract
G1 X151.552 Y116.813 E-0.16502 ; wipe and retract
G1 X151.044 Y117.320 E-0.16575 ; wipe and retract
G1 X151.044 Y118.035 E-0.16502 ; wipe and retract
G1 X151.145 Y117.934 E-0.03285 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X192.326 Y109.408 ; move to first perimeter point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X191.982 Y108.998 E0.02205 ; perimeter
G1 X194.591 Y106.809 E0.14029 ; perimeter
G1 X191.180 Y102.744 E0.21861 ; perimeter
G1 X188.571 Y104.933 E0.14029 ; perimeter
G1 X188.227 Y104.523 E0.02205 ; perimeter
G1 X190.836 Y102.334 E0.14029 ; perimeter
G1 X188.387 Y99.415 E0.15696 ; perimeter
G1 X188.894 Y98.989 E0.02729 ; perimeter
G1 X197.892 Y109.712 E0.57663 ; perimeter
G1 X197.384 Y110.138 E0.02729 ; perimeter
G1 X194.935 Y107.219 E0.15696 ; perimeter
G1 X192.372 Y109.369 E0.13782 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.277 Y109.966 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X191.424 Y108.949 E0.05471 ; perimeter
G1 X194.033 Y106.760 E0.14029 ; perimeter
G1 X191.131 Y103.302 E0.18596 ; perimeter
G1 X188.522 Y105.491 E0.14029 ; perimeter
G1 X187.669 Y104.474 E0.05471 ; perimeter
G1 X190.277 Y102.285 E0.14029 ; perimeter
G1 X187.828 Y99.366 E0.15696 ; perimeter
G1 X188.943 Y98.431 E0.05995 ; perimeter
G1 X198.450 Y109.761 E0.60929 ; perimeter
G1 X197.335 Y110.696 E0.05995 ; perimeter
G1 X194.886 Y107.777 E0.15696 ; perimeter
G1 X192.323 Y109.928 E0.13782 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.320 Y109.569 F10800.000 ; move inwards before travel
G1 F8640
G1 X191.424 Y108.949 E-0.30695 ; wipe and retract
G1 X192.927 Y107.688 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X148.643 Y138.884 ; move to first perimeter point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X148.642 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E0.94674 ; perimeter
G1 X198.510 Y115.788 E1.44587 ; perimeter
G1 X198.830 Y115.479 E0.01834 ; perimeter
G1 X199.114 Y115.110 E0.01918 ; perimeter
G1 X199.339 Y114.706 E0.01903 ; perimeter
G1 X199.496 Y114.277 E0.01884 ; perimeter
G1 X199.580 Y113.832 E0.01864 ; perimeter
G1 X199.584 Y113.384 E0.01847 ; perimeter
G1 X199.504 Y112.946 E0.01834 ; perimeter
G1 X199.341 Y112.540 E0.01805 ; perimeter
G1 X199.162 Y112.264 E0.01353 ; perimeter
G1 X198.345 Y111.285 E0.05254 ; perimeter
G1 X198.854 Y110.858 E0.02736 ; perimeter
G1 X199.743 Y111.919 E0.05702 ; perimeter
G1 X199.966 Y112.235 E0.01595 ; perimeter
G1 X200.118 Y112.557 E0.01465 ; perimeter
G1 X200.220 Y112.913 E0.01525 ; perimeter
G1 X200.270 Y113.405 E0.02040 ; perimeter
G1 X200.257 Y113.715 E0.01279 ; perimeter
G1 X200.182 Y114.144 E0.01791 ; perimeter
G1 X200.015 Y114.650 E0.02196 ; perimeter
G1 X199.811 Y115.064 E0.01901 ; perimeter
G1 X199.578 Y115.422 E0.01761 ; perimeter
G1 X199.232 Y115.843 E0.02244 ; perimeter
G1 X198.858 Y116.196 E0.02118 ; perimeter
G1 X171.819 Y138.884 E1.45408 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X148.703 Y138.884 E0.67400 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.247 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X148.246 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E0.95713 ; perimeter
G1 X198.245 Y115.494 E1.43934 ; perimeter
G1 X198.533 Y115.214 E0.01657 ; perimeter
G1 X198.782 Y114.892 E0.01678 ; perimeter
G1 X198.977 Y114.541 E0.01654 ; perimeter
G1 X199.113 Y114.171 E0.01621 ; perimeter
G1 X199.184 Y113.794 E0.01584 ; perimeter
G1 X199.187 Y113.418 E0.01546 ; perimeter
G1 X199.121 Y113.057 E0.01513 ; perimeter
G1 X198.987 Y112.723 E0.01481 ; perimeter
G1 X198.843 Y112.500 E0.01096 ; perimeter
G1 X197.787 Y111.236 E0.06785 ; perimeter
G1 X198.903 Y110.300 E0.05997 ; perimeter
G1 X200.058 Y111.677 E0.07405 ; perimeter
G1 X200.308 Y112.032 E0.01790 ; perimeter
G1 X200.491 Y112.417 E0.01755 ; perimeter
G1 X200.611 Y112.837 E0.01801 ; perimeter
G1 X200.667 Y113.394 E0.02303 ; perimeter
G1 X200.652 Y113.758 E0.01504 ; perimeter
G1 X200.567 Y114.240 E0.02017 ; perimeter
G1 X200.383 Y114.800 E0.02428 ; perimeter
G1 X200.156 Y115.260 E0.02112 ; perimeter
G1 X199.898 Y115.657 E0.01950 ; perimeter
G1 X199.522 Y116.114 E0.02439 ; perimeter
G1 X199.121 Y116.492 E0.02268 ; perimeter
G1 X171.963 Y139.280 E1.46050 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X148.307 Y139.280 E0.67399 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.455 Y138.939 F10800.000 ; move inwards before travel
G1 F8640
G1 X148.246 Y137.952 E-0.30696 ; wipe and retract
G1 X150.208 Y137.952 E-0.45304 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
G1 X166.558 Y138.860 ; move to first infill point
G1 Z13.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.776 Y139.642 E0.05566 ; infill
G1 X165.776 Y140.077 E0.02188 ; infill
G1 X166.026 Y140.077 E0.01260 ; infill
G1 X167.042 Y139.061 E0.07230 ; infill
G1 X167.727 Y139.061 E0.03448 ; infill
G1 X166.711 Y140.077 E0.07230 ; infill
G1 X167.396 Y140.077 E0.03448 ; infill
G1 X168.412 Y139.061 E0.07230 ; infill
G1 X169.097 Y139.061 E0.03448 ; infill
G1 X168.081 Y140.077 E0.07230 ; infill
G1 X168.766 Y140.077 E0.03448 ; infill
G1 X169.459 Y139.384 E0.04931 ; infill
G1 X169.459 Y140.069 E0.03448 ; infill
G1 X169.250 Y140.278 E0.01484 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;13.75


G1 F8640
G1 X169.459 Y140.069 E-0.06809 ; wipe and retract
G1 X169.459 Y139.384 E-0.15815 ; wipe and retract
G1 X168.766 Y140.077 E-0.22616 ; wipe and retract
G1 X168.081 Y140.077 E-0.15815 ; wipe and retract
G1 X168.539 Y139.619 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;13.75
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X100.742 Y100.738 ; move to first perimeter point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.66287 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X50.723 Y77.937 E1.46129 ; perimeter
G1 X50.348 Y77.583 E0.02123 ; perimeter
G1 X50.033 Y77.208 E0.02017 ; perimeter
G1 X49.771 Y76.808 E0.01970 ; perimeter
G1 X49.566 Y76.392 E0.01909 ; perimeter
G1 X49.421 Y75.971 E0.01838 ; perimeter
G1 X49.336 Y75.552 E0.01759 ; perimeter
G1 X49.311 Y75.150 E0.01661 ; perimeter
G1 X49.362 Y74.647 E0.02081 ; perimeter
G1 X49.459 Y74.305 E0.01467 ; perimeter
G1 X49.619 Y73.969 E0.01531 ; perimeter
G1 X49.770 Y73.751 E0.01092 ; perimeter
G1 X50.729 Y72.601 E0.06169 ; perimeter
G1 X51.235 Y73.025 E0.02721 ; perimeter
G1 X50.470 Y73.937 E0.04901 ; perimeter
G1 X50.242 Y74.276 E0.01685 ; perimeter
G1 X50.077 Y74.688 E0.01826 ; perimeter
G1 X49.997 Y75.125 E0.01834 ; perimeter
G1 X50.001 Y75.574 E0.01847 ; perimeter
G1 X50.085 Y76.018 E0.01864 ; perimeter
G1 X50.242 Y76.448 E0.01884 ; perimeter
G1 X50.467 Y76.851 E0.01903 ; perimeter
G1 X50.751 Y77.220 E0.01917 ; perimeter
G1 X51.071 Y77.530 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.45308 ; perimeter
G1 X100.740 Y100.203 E0.93304 ; perimeter
G1 X100.742 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X101.140 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.66293 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03671 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X50.459 Y78.233 E1.46771 ; perimeter
G1 X50.059 Y77.856 E0.02266 ; perimeter
G1 X49.715 Y77.445 E0.02209 ; perimeter
G1 X49.427 Y77.005 E0.02166 ; perimeter
G1 X49.200 Y76.545 E0.02112 ; perimeter
G1 X49.038 Y76.075 E0.02049 ; perimeter
G1 X48.942 Y75.604 E0.01981 ; perimeter
G1 X48.914 Y75.142 E0.01906 ; perimeter
G1 X48.971 Y74.574 E0.02353 ; perimeter
G1 X49.090 Y74.159 E0.01777 ; perimeter
G1 X49.275 Y73.770 E0.01776 ; perimeter
G1 X49.454 Y73.511 E0.01297 ; perimeter
G1 X50.679 Y72.042 E0.07881 ; perimeter
G1 X51.793 Y72.977 E0.05992 ; perimeter
G1 X50.787 Y74.175 E0.06447 ; perimeter
G1 X50.594 Y74.463 E0.01426 ; perimeter
G1 X50.459 Y74.798 E0.01489 ; perimeter
G1 X50.393 Y75.159 E0.01513 ; perimeter
G1 X50.397 Y75.535 E0.01546 ; perimeter
G1 X50.468 Y75.913 E0.01584 ; perimeter
G1 X50.604 Y76.282 E0.01621 ; perimeter
G1 X50.799 Y76.633 E0.01654 ; perimeter
G1 X51.047 Y76.955 E0.01678 ; perimeter
G1 X51.336 Y77.235 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.44655 ; perimeter
G1 X101.135 Y99.806 E0.94337 ; perimeter
G1 X101.139 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.740 Y101.127 F10800.000 ; move inwards before travel
G1 F8640
G1 X97.848 Y101.087 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X84.140 Y101.697 ; move to first infill point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.358 Y100.915 E0.05567 ; infill
G1 X82.673 Y100.915 E0.03448 ; infill
G1 X83.688 Y101.931 E0.07230 ; infill
G1 X83.003 Y101.931 E0.03448 ; infill
G1 X81.988 Y100.915 E0.07230 ; infill
G1 X81.303 Y100.915 E0.03448 ; infill
G1 X82.318 Y101.931 E0.07230 ; infill
G1 X81.634 Y101.931 E0.03448 ; infill
G1 X80.618 Y100.915 E0.07230 ; infill
G1 X80.256 Y100.915 E0.01821 ; infill
G1 X80.256 Y101.238 E0.01627 ; infill
G1 X80.949 Y101.931 E0.04930 ; infill
G1 X80.264 Y101.931 E0.03448 ; infill
G1 X80.055 Y101.722 E0.01483 ; infill
G1 F8640
G1 X80.264 Y101.931 E-0.06804 ; wipe and retract
G1 X80.949 Y101.931 E-0.15815 ; wipe and retract
G1 X80.256 Y101.238 E-0.22612 ; wipe and retract
G1 X80.256 Y100.915 E-0.07462 ; wipe and retract
G1 X80.618 Y100.915 E-0.08353 ; wipe and retract
G1 X81.076 Y101.373 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X57.249 Y71.145 ; move to first perimeter point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X54.646 Y68.960 E0.14002 ; perimeter
G1 X52.197 Y71.879 E0.15696 ; perimeter
G1 X51.689 Y71.453 E0.02729 ; perimeter
G1 X60.686 Y60.730 E0.57663 ; perimeter
G1 X61.194 Y61.156 E0.02729 ; perimeter
G1 X58.745 Y64.075 E0.15696 ; perimeter
G1 X61.349 Y66.260 E0.14002 ; perimeter
G1 X61.005 Y66.670 E0.02205 ; perimeter
G1 X58.401 Y64.485 E0.14002 ; perimeter
G1 X54.990 Y68.550 E0.21861 ; perimeter
G1 X57.593 Y70.735 E0.14002 ; perimeter
G1 X57.288 Y71.099 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.298 Y71.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X54.695 Y69.519 E0.14002 ; perimeter
G1 X52.246 Y72.437 E0.15696 ; perimeter
G1 X51.131 Y71.502 E0.05995 ; perimeter
G1 X60.638 Y60.172 E0.60929 ; perimeter
G1 X61.752 Y61.108 E0.05995 ; perimeter
G1 X59.303 Y64.026 E0.15696 ; perimeter
G1 X61.907 Y66.211 E0.14002 ; perimeter
G1 X61.053 Y67.228 E0.05471 ; perimeter
G1 X58.450 Y65.043 E0.14002 ; perimeter
G1 X55.548 Y68.501 E0.18596 ; perimeter
G1 X58.152 Y70.686 E0.14002 ; perimeter
G1 X57.337 Y71.657 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.026 Y71.410 F10800.000 ; move inwards before travel
G1 F8640
G1 X54.778 Y69.587 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X98.987 Y81.038 ; move to first perimeter point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.04695 ; perimeter
G1 X97.847 Y77.343 E0.15222 ; perimeter
G1 X98.987 Y77.343 E0.04695 ; perimeter
G1 X98.987 Y80.978 E0.14974 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.15621 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X65.421 Y60.428 E0.87756 ; perimeter
G1 X65.060 Y60.167 E0.01834 ; perimeter
G1 X64.648 Y59.951 E0.01917 ; perimeter
G1 X64.211 Y59.800 E0.01903 ; perimeter
G1 X63.761 Y59.720 E0.01884 ; perimeter
G1 X63.308 Y59.714 E0.01864 ; perimeter
G1 X62.866 Y59.788 E0.01847 ; perimeter
G1 X62.449 Y59.943 E0.01834 ; perimeter
G1 X62.235 Y60.076 E0.01039 ; perimeter
G1 X61.676 Y59.607 E0.03005 ; perimeter
G1 X61.958 Y59.406 E0.01428 ; perimeter
G1 X62.288 Y59.245 E0.01511 ; perimeter
G1 X62.777 Y59.107 E0.02093 ; perimeter
G1 X63.069 Y59.068 E0.01215 ; perimeter
G1 X63.502 Y59.067 E0.01785 ; perimeter
G1 X64.044 Y59.145 E0.02252 ; perimeter
G1 X64.484 Y59.274 E0.01891 ; perimeter
G1 X64.924 Y59.463 E0.01972 ; perimeter
G1 X65.303 Y59.681 E0.01801 ; perimeter
G1 X65.763 Y60.017 E0.02349 ; perimeter
G1 X81.934 Y73.586 E0.86960 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y76.946 E0.16282 ; perimeter
G1 X99.383 Y76.946 E0.07960 ; perimeter
G1 X99.383 Y81.374 E0.18240 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.17848 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X65.177 Y60.741 E0.88291 ; perimeter
G1 X64.851 Y60.505 E0.01657 ; perimeter
G1 X64.490 Y60.316 E0.01678 ; perimeter
G1 X64.111 Y60.185 E0.01654 ; perimeter
G1 X63.723 Y60.115 E0.01621 ; perimeter
G1 X63.339 Y60.111 E0.01584 ; perimeter
G1 X62.969 Y60.173 E0.01546 ; perimeter
G1 X62.624 Y60.300 E0.01513 ; perimeter
G1 X62.317 Y60.491 E0.01489 ; perimeter
G1 X62.222 Y60.583 E0.00544 ; perimeter
G1 X61.090 Y59.633 E0.06089 ; perimeter
G1 X61.407 Y59.312 E0.01857 ; perimeter
G1 X61.755 Y59.064 E0.01760 ; perimeter
G1 X62.146 Y58.873 E0.01792 ; perimeter
G1 X62.697 Y58.718 E0.02357 ; perimeter
G1 X63.043 Y58.672 E0.01438 ; perimeter
G1 X63.530 Y58.671 E0.02010 ; perimeter
G1 X64.128 Y58.757 E0.02486 ; perimeter
G1 X64.618 Y58.900 E0.02105 ; perimeter
G1 X65.102 Y59.108 E0.02167 ; perimeter
G1 X65.519 Y59.348 E0.01985 ; perimeter
G1 X66.008 Y59.705 E0.02492 ; perimeter
G1 X82.078 Y73.189 E0.86420 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y76.550 E0.16282 ; perimeter
G1 X99.780 Y76.550 E0.11226 ; perimeter
G1 X99.780 Y81.770 E0.21506 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.406 Y81.688 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.488 Y81.816 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X97.962 Y80.011 ; move to first infill point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7984.85
G1 X98.671 Y80.719 E0.04695 ; infill
G1 X98.671 Y80.082 E0.02988 ; infill
G1 X98.163 Y79.574 E0.03364 ; infill
G1 X98.163 Y78.936 E0.02988 ; infill
G1 X98.671 Y79.444 E0.03364 ; infill
G1 X98.671 Y78.806 E0.02988 ; infill
G1 X98.163 Y78.299 E0.03364 ; infill
G1 X98.163 Y77.661 E0.02988 ; infill
G1 X98.872 Y78.370 E0.04695 ; infill
G1 F8640
G1 X98.163 Y77.661 E-0.23134 ; wipe and retract
G1 X98.163 Y78.299 E-0.14722 ; wipe and retract
G1 X98.671 Y78.806 E-0.16575 ; wipe and retract
G1 X98.671 Y79.444 E-0.14722 ; wipe and retract
G1 X98.461 Y79.234 E-0.06845 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.037 Y86.910 E0.13721 ; perimeter
G1 X76.381 Y86.500 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.13721 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X83.058 Y78.543 E0.13721 ; perimeter
G1 X83.402 Y78.133 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.13721 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.479 Y86.959 E0.13721 ; perimeter
G1 X76.332 Y85.941 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.13721 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.499 Y78.592 E0.13721 ; perimeter
G1 X83.353 Y77.575 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.13721 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.598 Y78.133 E0.13721 ; perimeter
G1 X166.942 Y78.543 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.13721 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.619 Y86.500 E0.13721 ; perimeter
G1 X173.963 Y86.910 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.13721 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X166.647 Y77.575 E0.13721 ; perimeter
G1 X167.471 Y78.557 E0.05283 ; perimeter
G1 X167.501 Y78.592 E0.00188 ; perimeter
G1 X164.949 Y80.733 E0.13721 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X173.668 Y85.941 E0.13721 ; perimeter
G1 X174.521 Y86.959 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.13721 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X151.013 Y81.038 ; move to first perimeter point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y77.343 E0.15222 ; perimeter
G1 X152.153 Y77.343 E0.04695 ; perimeter
G1 X152.153 Y81.038 E0.15222 ; perimeter
G1 X151.073 Y81.038 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.617 Y76.946 E0.18487 ; perimeter
G1 X152.549 Y76.946 E0.07960 ; perimeter
G1 X152.549 Y80.899 E0.16282 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X184.237 Y60.017 E0.86960 ; perimeter
G1 X184.697 Y59.681 E0.02349 ; perimeter
G1 X185.076 Y59.463 E0.01801 ; perimeter
G1 X185.516 Y59.274 E0.01972 ; perimeter
G1 X185.961 Y59.144 E0.01909 ; perimeter
G1 X186.397 Y59.075 E0.01819 ; perimeter
G1 X186.931 Y59.069 E0.02199 ; perimeter
G1 X187.336 Y59.129 E0.01689 ; perimeter
G1 X187.598 Y59.205 E0.01124 ; perimeter
G1 X188.048 Y59.411 E0.02039 ; perimeter
G1 X188.324 Y59.607 E0.01394 ; perimeter
G1 X187.765 Y60.076 E0.03005 ; perimeter
G1 X187.551 Y59.943 E0.01039 ; perimeter
G1 X187.134 Y59.788 E0.01834 ; perimeter
G1 X186.692 Y59.714 E0.01847 ; perimeter
G1 X186.239 Y59.720 E0.01864 ; perimeter
G1 X185.789 Y59.800 E0.01884 ; perimeter
G1 X185.352 Y59.951 E0.01903 ; perimeter
G1 X184.944 Y60.165 E0.01899 ; perimeter
G1 X184.676 Y60.353 E0.01348 ; perimeter
G1 X168.261 Y74.121 E0.88259 ; perimeter
M73 Q63 S51
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X150.677 Y81.434 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X150.220 Y76.550 E0.21753 ; perimeter
G1 X152.945 Y76.550 E0.11226 ; perimeter
G1 X152.945 Y80.502 E0.16282 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X183.992 Y59.705 E0.86420 ; perimeter
G1 X184.481 Y59.348 E0.02492 ; perimeter
G1 X184.898 Y59.108 E0.01985 ; perimeter
G1 X185.382 Y58.900 E0.02167 ; perimeter
G1 X185.874 Y58.757 E0.02111 ; perimeter
G1 X186.363 Y58.679 E0.02042 ; perimeter
G1 X186.957 Y58.672 E0.02448 ; perimeter
G1 X187.421 Y58.740 E0.01931 ; perimeter
G1 X187.737 Y58.833 E0.01355 ; perimeter
G1 X188.247 Y59.066 E0.02312 ; perimeter
G1 X188.593 Y59.312 E0.01748 ; perimeter
G1 X188.910 Y59.633 E0.01857 ; perimeter
G1 X187.778 Y60.583 E0.06089 ; perimeter
G1 X187.683 Y60.491 E0.00544 ; perimeter
G1 X187.376 Y60.300 E0.01489 ; perimeter
G1 X187.031 Y60.173 E0.01513 ; perimeter
G1 X186.661 Y60.111 E0.01546 ; perimeter
G1 X186.277 Y60.115 E0.01584 ; perimeter
G1 X185.889 Y60.185 E0.01621 ; perimeter
G1 X185.510 Y60.316 E0.01654 ; perimeter
G1 X185.151 Y60.504 E0.01671 ; perimeter
G1 X184.918 Y60.668 E0.01172 ; perimeter
G1 X168.405 Y74.517 E0.88783 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X150.280 Y81.830 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.359 Y81.455 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.243 Y78.539 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X151.128 Y80.011 ; move to first infill point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7984.86
G1 X151.837 Y80.719 E0.04695 ; infill
G1 X151.837 Y80.082 E0.02988 ; infill
G1 X151.329 Y79.574 E0.03364 ; infill
G1 X151.329 Y78.936 E0.02988 ; infill
G1 X151.837 Y79.444 E0.03364 ; infill
G1 X151.837 Y78.806 E0.02988 ; infill
G1 X151.329 Y78.299 E0.03364 ; infill
G1 X151.329 Y77.661 E0.02988 ; infill
G1 X152.038 Y78.370 E0.04695 ; infill
G1 F8640
G1 X151.329 Y77.661 E-0.23134 ; wipe and retract
G1 X151.329 Y78.299 E-0.14722 ; wipe and retract
G1 X151.837 Y78.806 E-0.16575 ; wipe and retract
G1 X151.837 Y79.444 E-0.14722 ; wipe and retract
G1 X151.627 Y79.234 E-0.06846 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X192.751 Y71.145 ; move to first perimeter point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X192.407 Y70.735 E0.02205 ; perimeter
G1 X195.010 Y68.550 E0.14002 ; perimeter
G1 X191.599 Y64.485 E0.21861 ; perimeter
G1 X188.995 Y66.670 E0.14002 ; perimeter
G1 X188.651 Y66.260 E0.02205 ; perimeter
G1 X191.255 Y64.075 E0.14002 ; perimeter
G1 X188.806 Y61.156 E0.15696 ; perimeter
G1 X189.314 Y60.730 E0.02729 ; perimeter
G1 X198.311 Y71.453 E0.57663 ; perimeter
G1 X197.803 Y71.879 E0.02729 ; perimeter
G1 X195.354 Y68.960 E0.15696 ; perimeter
G1 X192.797 Y71.106 E0.13755 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.702 Y71.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X191.848 Y70.686 E0.05471 ; perimeter
G1 X194.452 Y68.501 E0.14002 ; perimeter
G1 X191.550 Y65.043 E0.18596 ; perimeter
G1 X188.947 Y67.228 E0.14002 ; perimeter
G1 X188.093 Y66.211 E0.05471 ; perimeter
G1 X190.697 Y64.026 E0.14002 ; perimeter
G1 X188.248 Y61.108 E0.15696 ; perimeter
G1 X189.362 Y60.172 E0.05995 ; perimeter
G1 X198.869 Y71.502 E0.60929 ; perimeter
G1 X197.754 Y72.437 E0.05995 ; perimeter
G1 X195.305 Y69.519 E0.15696 ; perimeter
G1 X192.748 Y71.665 E0.13755 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.744 Y71.306 F10800.000 ; move inwards before travel
G1 F8640
G1 X191.848 Y70.686 E-0.30695 ; wipe and retract
G1 X193.351 Y69.425 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X149.258 Y100.738 ; move to first perimeter point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X149.260 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E0.93304 ; perimeter
G1 X198.929 Y77.530 E1.45308 ; perimeter
G1 X199.249 Y77.220 E0.01834 ; perimeter
G1 X199.533 Y76.851 E0.01918 ; perimeter
G1 X199.758 Y76.448 E0.01903 ; perimeter
G1 X199.915 Y76.018 E0.01884 ; perimeter
G1 X199.999 Y75.574 E0.01864 ; perimeter
G1 X200.003 Y75.125 E0.01847 ; perimeter
G1 X199.923 Y74.688 E0.01834 ; perimeter
G1 X199.760 Y74.281 E0.01806 ; perimeter
G1 X199.579 Y74.003 E0.01366 ; perimeter
G1 X198.764 Y73.026 E0.05239 ; perimeter
G1 X199.273 Y72.600 E0.02736 ; perimeter
G1 X200.163 Y73.660 E0.05702 ; perimeter
G1 X200.385 Y73.976 E0.01590 ; perimeter
G1 X200.537 Y74.296 E0.01460 ; perimeter
G1 X200.639 Y74.650 E0.01518 ; perimeter
G1 X200.689 Y75.156 E0.02093 ; perimeter
G1 X200.677 Y75.450 E0.01215 ; perimeter
G1 X200.603 Y75.877 E0.01785 ; perimeter
G1 X200.432 Y76.396 E0.02252 ; perimeter
G1 X200.228 Y76.809 E0.01895 ; perimeter
G1 X200.005 Y77.152 E0.01686 ; perimeter
G1 X199.649 Y77.586 E0.02311 ; perimeter
G1 X199.277 Y77.937 E0.02109 ; perimeter
G1 X172.104 Y100.738 E1.46129 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X149.318 Y100.738 E0.66040 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.860 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X148.865 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E0.94337 ; perimeter
G1 X198.664 Y77.235 E1.44655 ; perimeter
G1 X198.953 Y76.955 E0.01657 ; perimeter
G1 X199.201 Y76.633 E0.01678 ; perimeter
G1 X199.396 Y76.282 E0.01654 ; perimeter
G1 X199.532 Y75.913 E0.01621 ; perimeter
G1 X199.603 Y75.535 E0.01584 ; perimeter
G1 X199.607 Y75.159 E0.01546 ; perimeter
G1 X199.541 Y74.798 E0.01513 ; perimeter
G1 X199.407 Y74.464 E0.01482 ; perimeter
G1 X199.260 Y74.239 E0.01110 ; perimeter
G1 X198.207 Y72.977 E0.06770 ; perimeter
G1 X199.322 Y72.041 E0.05997 ; perimeter
G1 X200.477 Y73.418 E0.07405 ; perimeter
G1 X200.726 Y73.772 E0.01785 ; perimeter
G1 X200.909 Y74.156 E0.01750 ; perimeter
G1 X201.029 Y74.575 E0.01795 ; perimeter
G1 X201.087 Y75.144 E0.02357 ; perimeter
G1 X201.072 Y75.493 E0.01438 ; perimeter
G1 X200.988 Y75.974 E0.02010 ; perimeter
G1 X200.800 Y76.547 E0.02486 ; perimeter
G1 X200.573 Y77.005 E0.02106 ; perimeter
G1 X200.326 Y77.386 E0.01873 ; perimeter
G1 X199.940 Y77.857 E0.02505 ; perimeter
G1 X199.541 Y78.233 E0.02261 ; perimeter
G1 X172.248 Y101.134 E1.46771 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X148.920 Y101.134 E0.66046 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.070 Y100.794 F10800.000 ; move inwards before travel
G1 F8640
G1 X148.865 Y99.806 E-0.30690 ; wipe and retract
G1 X150.828 Y99.806 E-0.45310 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X165.860 Y101.722 ; move to first infill point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.069 Y101.931 E0.01484 ; infill
G1 X166.754 Y101.931 E0.03448 ; infill
G1 X166.061 Y101.238 E0.04930 ; infill
G1 X166.061 Y100.915 E0.01627 ; infill
G1 X166.423 Y100.915 E0.01821 ; infill
G1 X167.439 Y101.931 E0.07230 ; infill
G1 X168.124 Y101.931 E0.03448 ; infill
G1 X167.108 Y100.915 E0.07230 ; infill
G1 X167.793 Y100.915 E0.03448 ; infill
G1 X168.808 Y101.931 E0.07230 ; infill
G1 X169.493 Y101.931 E0.03448 ; infill
G1 X168.478 Y100.915 E0.07230 ; infill
G1 X169.163 Y100.915 E0.03448 ; infill
G1 X169.945 Y101.697 E0.05567 ; infill
G1 F8640
G1 X169.163 Y100.915 E-0.25535 ; wipe and retract
G1 X168.478 Y100.915 E-0.15815 ; wipe and retract
G1 X169.493 Y101.931 E-0.33164 ; wipe and retract
G1 X169.429 Y101.931 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X100.457 Y138.884 ; move to first perimeter point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.66287 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X50.438 Y116.083 E1.46129 ; perimeter
M73 P63 R49
G1 X50.063 Y115.729 E0.02123 ; perimeter
G1 X49.748 Y115.354 E0.02017 ; perimeter
G1 X49.486 Y114.954 E0.01970 ; perimeter
G1 X49.281 Y114.539 E0.01909 ; perimeter
G1 X49.136 Y114.117 E0.01838 ; perimeter
G1 X49.051 Y113.698 E0.01759 ; perimeter
G1 X49.026 Y113.296 E0.01661 ; perimeter
G1 X49.077 Y112.793 E0.02081 ; perimeter
G1 X49.174 Y112.451 E0.01467 ; perimeter
G1 X49.334 Y112.115 E0.01531 ; perimeter
G1 X49.485 Y111.897 E0.01092 ; perimeter
G1 X50.443 Y110.747 E0.06169 ; perimeter
G1 X50.949 Y111.172 E0.02721 ; perimeter
G1 X50.185 Y112.083 E0.04901 ; perimeter
G1 X49.957 Y112.422 E0.01685 ; perimeter
G1 X49.791 Y112.834 E0.01826 ; perimeter
G1 X49.711 Y113.272 E0.01834 ; perimeter
G1 X49.715 Y113.720 E0.01847 ; perimeter
G1 X49.799 Y114.165 E0.01864 ; perimeter
G1 X49.957 Y114.594 E0.01884 ; perimeter
G1 X50.182 Y114.998 E0.01903 ; perimeter
G1 X50.466 Y115.366 E0.01917 ; perimeter
G1 X50.785 Y115.676 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.45308 ; perimeter
G1 X100.455 Y138.349 E0.93304 ; perimeter
G1 X100.456 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.854 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.66293 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03671 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X50.174 Y116.379 E1.46771 ; perimeter
G1 X49.774 Y116.002 E0.02266 ; perimeter
G1 X49.429 Y115.591 E0.02209 ; perimeter
G1 X49.141 Y115.151 E0.02166 ; perimeter
G1 X48.915 Y114.692 E0.02112 ; perimeter
G1 X48.752 Y114.221 E0.02049 ; perimeter
G1 X48.657 Y113.750 E0.01981 ; perimeter
G1 X48.628 Y113.288 E0.01906 ; perimeter
G1 X48.686 Y112.720 E0.02353 ; perimeter
G1 X48.804 Y112.305 E0.01777 ; perimeter
G1 X48.990 Y111.916 E0.01776 ; perimeter
G1 X49.169 Y111.657 E0.01297 ; perimeter
G1 X50.394 Y110.188 E0.07881 ; perimeter
G1 X51.508 Y111.123 E0.05992 ; perimeter
G1 X50.502 Y112.322 E0.06447 ; perimeter
G1 X50.309 Y112.609 E0.01426 ; perimeter
G1 X50.174 Y112.944 E0.01489 ; perimeter
G1 X50.108 Y113.306 E0.01513 ; perimeter
G1 X50.111 Y113.681 E0.01546 ; perimeter
G1 X50.183 Y114.059 E0.01584 ; perimeter
G1 X50.318 Y114.428 E0.01621 ; perimeter
G1 X50.514 Y114.779 E0.01654 ; perimeter
G1 X50.762 Y115.102 E0.01678 ; perimeter
G1 X51.051 Y115.381 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.44655 ; perimeter
G1 X100.850 Y137.952 E0.94337 ; perimeter
G1 X100.854 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.454 Y139.273 F10800.000 ; move inwards before travel
G1 F8640
G1 X97.563 Y139.233 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X83.854 Y139.843 ; move to first infill point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.072 Y139.061 E0.05567 ; infill
G1 X82.388 Y139.061 E0.03448 ; infill
G1 X83.403 Y140.077 E0.07230 ; infill
G1 X82.718 Y140.077 E0.03448 ; infill
G1 X81.703 Y139.061 E0.07230 ; infill
G1 X81.018 Y139.061 E0.03448 ; infill
G1 X82.033 Y140.077 E0.07230 ; infill
G1 X81.348 Y140.077 E0.03448 ; infill
G1 X80.333 Y139.061 E0.07230 ; infill
G1 X79.971 Y139.061 E0.01821 ; infill
G1 X79.971 Y139.384 E0.01627 ; infill
G1 X80.663 Y140.077 E0.04930 ; infill
G1 X79.978 Y140.077 E0.03448 ; infill
G1 X79.770 Y139.868 E0.01483 ; infill
G1 F8640
G1 X79.978 Y140.077 E-0.06804 ; wipe and retract
G1 X80.663 Y140.077 E-0.15815 ; wipe and retract
G1 X79.971 Y139.384 E-0.22612 ; wipe and retract
G1 X79.971 Y139.061 E-0.07462 ; wipe and retract
G1 X80.333 Y139.061 E-0.08353 ; wipe and retract
G1 X80.791 Y139.519 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X56.964 Y109.291 ; move to first perimeter point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X54.360 Y107.106 E0.14002 ; perimeter
G1 X51.911 Y110.025 E0.15696 ; perimeter
G1 X51.404 Y109.599 E0.02729 ; perimeter
G1 X60.401 Y98.877 E0.57663 ; perimeter
G1 X60.909 Y99.303 E0.02729 ; perimeter
G1 X58.460 Y102.221 E0.15696 ; perimeter
G1 X61.063 Y104.406 E0.14002 ; perimeter
G1 X60.719 Y104.816 E0.02205 ; perimeter
G1 X58.116 Y102.631 E0.14002 ; perimeter
G1 X54.705 Y106.696 E0.21861 ; perimeter
G1 X57.308 Y108.881 E0.14002 ; perimeter
G1 X57.003 Y109.245 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.013 Y109.850 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X54.409 Y107.665 E0.14002 ; perimeter
G1 X51.960 Y110.583 E0.15696 ; perimeter
G1 X50.846 Y109.648 E0.05995 ; perimeter
G1 X60.352 Y98.318 E0.60929 ; perimeter
G1 X61.467 Y99.254 E0.05995 ; perimeter
G1 X59.018 Y102.172 E0.15696 ; perimeter
G1 X61.622 Y104.357 E0.14002 ; perimeter
G1 X60.768 Y105.374 E0.05471 ; perimeter
G1 X58.165 Y103.190 E0.14002 ; perimeter
G1 X55.263 Y106.648 E0.18596 ; perimeter
G1 X57.867 Y108.832 E0.14002 ; perimeter
G1 X57.052 Y109.804 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.741 Y109.556 F10800.000 ; move inwards before travel
G1 F8640
G1 X54.493 Y107.733 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X98.702 Y119.184 ; move to first perimeter point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.04695 ; perimeter
G1 X97.562 Y115.489 E0.15222 ; perimeter
G1 X98.702 Y115.489 E0.04695 ; perimeter
G1 X98.702 Y119.124 E0.14974 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.15621 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X65.135 Y98.574 E0.87756 ; perimeter
G1 X64.775 Y98.313 E0.01834 ; perimeter
G1 X64.362 Y98.097 E0.01917 ; perimeter
G1 X63.926 Y97.946 E0.01903 ; perimeter
G1 X63.476 Y97.866 E0.01884 ; perimeter
G1 X63.023 Y97.860 E0.01864 ; perimeter
G1 X62.581 Y97.934 E0.01847 ; perimeter
G1 X62.164 Y98.089 E0.01834 ; perimeter
G1 X61.950 Y98.222 E0.01039 ; perimeter
G1 X61.391 Y97.753 E0.03005 ; perimeter
G1 X61.673 Y97.552 E0.01428 ; perimeter
G1 X62.003 Y97.391 E0.01511 ; perimeter
G1 X62.492 Y97.253 E0.02093 ; perimeter
G1 X62.784 Y97.215 E0.01215 ; perimeter
G1 X63.217 Y97.213 E0.01785 ; perimeter
G1 X63.758 Y97.292 E0.02252 ; perimeter
G1 X64.199 Y97.420 E0.01891 ; perimeter
G1 X64.639 Y97.609 E0.01972 ; perimeter
G1 X65.018 Y97.827 E0.01801 ; perimeter
G1 X65.478 Y98.163 E0.02349 ; perimeter
G1 X81.649 Y111.732 E0.86960 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y115.092 E0.16282 ; perimeter
G1 X99.098 Y115.092 E0.07960 ; perimeter
G1 X99.098 Y119.520 E0.18240 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.17848 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X64.891 Y98.887 E0.88291 ; perimeter
G1 X64.566 Y98.651 E0.01657 ; perimeter
G1 X64.205 Y98.462 E0.01678 ; perimeter
G1 X63.826 Y98.331 E0.01654 ; perimeter
G1 X63.438 Y98.262 E0.01621 ; perimeter
G1 X63.054 Y98.257 E0.01584 ; perimeter
G1 X62.683 Y98.319 E0.01546 ; perimeter
G1 X62.339 Y98.447 E0.01513 ; perimeter
G1 X62.032 Y98.638 E0.01489 ; perimeter
G1 X61.937 Y98.729 E0.00544 ; perimeter
G1 X60.805 Y97.779 E0.06089 ; perimeter
G1 X61.122 Y97.458 E0.01857 ; perimeter
G1 X61.470 Y97.210 E0.01760 ; perimeter
G1 X61.861 Y97.019 E0.01792 ; perimeter
G1 X62.411 Y96.864 E0.02357 ; perimeter
G1 X62.757 Y96.818 E0.01438 ; perimeter
G1 X63.245 Y96.817 E0.02010 ; perimeter
G1 X63.843 Y96.903 E0.02486 ; perimeter
G1 X64.333 Y97.046 E0.02105 ; perimeter
G1 X64.816 Y97.254 E0.02167 ; perimeter
G1 X65.234 Y97.494 E0.01985 ; perimeter
G1 X65.723 Y97.851 E0.02492 ; perimeter
G1 X81.793 Y111.335 E0.86420 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y114.696 E0.16282 ; perimeter
G1 X99.494 Y114.696 E0.11226 ; perimeter
G1 X99.494 Y119.916 E0.21506 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.121 Y119.834 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.203 Y119.962 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X97.677 Y118.157 ; move to first infill point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7984.85
G1 X98.386 Y118.865 E0.04695 ; infill
G1 X98.386 Y118.228 E0.02988 ; infill
G1 X97.878 Y117.720 E0.03364 ; infill
G1 X97.878 Y117.083 E0.02988 ; infill
G1 X98.386 Y117.590 E0.03364 ; infill
G1 X98.386 Y116.953 E0.02988 ; infill
G1 X97.878 Y116.445 E0.03364 ; infill
G1 X97.878 Y115.807 E0.02988 ; infill
G1 X98.587 Y116.516 E0.04695 ; infill
G1 F8640
G1 X97.878 Y115.807 E-0.23134 ; wipe and retract
G1 X97.878 Y116.445 E-0.14722 ; wipe and retract
G1 X98.386 Y116.953 E-0.16575 ; wipe and retract
G1 X98.386 Y117.590 E-0.14722 ; wipe and retract
G1 X98.176 Y117.380 E-0.06845 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.752 Y125.056 E0.13721 ; perimeter
G1 X76.096 Y124.646 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.13721 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.772 Y116.689 E0.13721 ; perimeter
G1 X83.117 Y116.279 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.13721 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.194 Y125.105 E0.13721 ; perimeter
G1 X76.047 Y124.088 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.13721 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X82.214 Y116.738 E0.13721 ; perimeter
G1 X83.068 Y115.721 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.13721 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.313 Y116.279 E0.13721 ; perimeter
G1 X166.657 Y116.689 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.13721 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.334 Y124.646 E0.13721 ; perimeter
G1 X173.678 Y125.056 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.13721 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.362 Y115.721 E0.13721 ; perimeter
G1 X167.186 Y116.703 E0.05283 ; perimeter
G1 X167.216 Y116.738 E0.00188 ; perimeter
G1 X164.664 Y118.879 E0.13721 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.382 Y124.088 E0.13721 ; perimeter
G1 X174.236 Y125.105 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.13721 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X150.728 Y119.184 ; move to first perimeter point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y115.489 E0.15222 ; perimeter
G1 X151.868 Y115.489 E0.04695 ; perimeter
G1 X151.868 Y119.184 E0.15222 ; perimeter
G1 X150.788 Y119.184 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.332 Y115.092 E0.18487 ; perimeter
G1 X152.264 Y115.092 E0.07960 ; perimeter
G1 X152.264 Y119.045 E0.16282 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X183.951 Y98.163 E0.86960 ; perimeter
G1 X184.412 Y97.827 E0.02349 ; perimeter
G1 X184.791 Y97.609 E0.01801 ; perimeter
G1 X185.231 Y97.420 E0.01972 ; perimeter
G1 X185.676 Y97.290 E0.01909 ; perimeter
G1 X186.112 Y97.221 E0.01819 ; perimeter
G1 X186.645 Y97.215 E0.02199 ; perimeter
G1 X187.051 Y97.275 E0.01689 ; perimeter
G1 X187.313 Y97.351 E0.01124 ; perimeter
G1 X187.763 Y97.557 E0.02039 ; perimeter
G1 X188.039 Y97.753 E0.01394 ; perimeter
G1 X187.480 Y98.222 E0.03005 ; perimeter
G1 X187.266 Y98.089 E0.01039 ; perimeter
G1 X186.849 Y97.934 E0.01834 ; perimeter
G1 X186.406 Y97.860 E0.01847 ; perimeter
G1 X185.954 Y97.866 E0.01864 ; perimeter
G1 X185.504 Y97.946 E0.01884 ; perimeter
G1 X185.067 Y98.097 E0.01903 ; perimeter
G1 X184.659 Y98.311 E0.01899 ; perimeter
G1 X184.391 Y98.499 E0.01348 ; perimeter
G1 X167.976 Y112.267 E0.88259 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X150.392 Y119.580 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.935 Y114.696 E0.21753 ; perimeter
G1 X152.660 Y114.696 E0.11226 ; perimeter
G1 X152.660 Y118.648 E0.16282 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X183.707 Y97.851 E0.86420 ; perimeter
G1 X184.195 Y97.494 E0.02492 ; perimeter
G1 X184.613 Y97.254 E0.01985 ; perimeter
G1 X185.097 Y97.046 E0.02167 ; perimeter
G1 X185.589 Y96.903 E0.02111 ; perimeter
G1 X186.078 Y96.825 E0.02042 ; perimeter
G1 X186.672 Y96.818 E0.02448 ; perimeter
G1 X187.136 Y96.887 E0.01931 ; perimeter
G1 X187.452 Y96.979 E0.01355 ; perimeter
G1 X187.962 Y97.212 E0.02312 ; perimeter
G1 X188.308 Y97.458 E0.01748 ; perimeter
G1 X188.625 Y97.779 E0.01857 ; perimeter
G1 X187.493 Y98.729 E0.06089 ; perimeter
G1 X187.397 Y98.638 E0.00544 ; perimeter
G1 X187.091 Y98.447 E0.01489 ; perimeter
G1 X186.746 Y98.319 E0.01513 ; perimeter
G1 X186.376 Y98.257 E0.01546 ; perimeter
G1 X185.991 Y98.262 E0.01584 ; perimeter
G1 X185.604 Y98.331 E0.01621 ; perimeter
G1 X185.225 Y98.462 E0.01654 ; perimeter
G1 X184.865 Y98.650 E0.01671 ; perimeter
G1 X184.633 Y98.814 E0.01172 ; perimeter
G1 X168.120 Y112.663 E0.88783 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X149.995 Y119.976 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.074 Y119.601 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.958 Y116.685 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X150.843 Y118.157 ; move to first infill point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7984.86
G1 X151.552 Y118.865 E0.04695 ; infill
G1 X151.552 Y118.228 E0.02988 ; infill
G1 X151.044 Y117.720 E0.03364 ; infill
G1 X151.044 Y117.083 E0.02988 ; infill
G1 X151.552 Y117.590 E0.03364 ; infill
G1 X151.552 Y116.953 E0.02988 ; infill
G1 X151.044 Y116.445 E0.03364 ; infill
G1 X151.044 Y115.807 E0.02988 ; infill
G1 X151.752 Y116.516 E0.04695 ; infill
G1 F8640
G1 X151.044 Y115.807 E-0.23134 ; wipe and retract
G1 X151.044 Y116.445 E-0.14722 ; wipe and retract
G1 X151.552 Y116.953 E-0.16575 ; wipe and retract
G1 X151.552 Y117.590 E-0.14722 ; wipe and retract
G1 X151.342 Y117.380 E-0.06846 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X192.465 Y109.291 ; move to first perimeter point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X192.121 Y108.881 E0.02205 ; perimeter
G1 X194.725 Y106.696 E0.14002 ; perimeter
G1 X191.314 Y102.631 E0.21861 ; perimeter
G1 X188.710 Y104.816 E0.14002 ; perimeter
G1 X188.366 Y104.406 E0.02205 ; perimeter
G1 X190.970 Y102.221 E0.14002 ; perimeter
G1 X188.521 Y99.303 E0.15696 ; perimeter
G1 X189.028 Y98.877 E0.02729 ; perimeter
G1 X198.026 Y109.599 E0.57663 ; perimeter
G1 X197.518 Y110.025 E0.02729 ; perimeter
G1 X195.069 Y107.106 E0.15696 ; perimeter
G1 X192.511 Y109.253 E0.13755 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.417 Y109.850 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X191.563 Y108.832 E0.05471 ; perimeter
G1 X194.167 Y106.648 E0.14002 ; perimeter
G1 X191.265 Y103.190 E0.18596 ; perimeter
G1 X188.661 Y105.374 E0.14002 ; perimeter
G1 X187.808 Y104.357 E0.05471 ; perimeter
G1 X190.412 Y102.172 E0.14002 ; perimeter
G1 X187.962 Y99.254 E0.15696 ; perimeter
G1 X189.077 Y98.318 E0.05995 ; perimeter
G1 X198.584 Y109.648 E0.60929 ; perimeter
G1 X197.469 Y110.583 E0.05995 ; perimeter
G1 X195.020 Y107.665 E0.15696 ; perimeter
G1 X192.463 Y109.811 E0.13755 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.459 Y109.452 F10800.000 ; move inwards before travel
G1 F8640
G1 X191.563 Y108.832 E-0.30695 ; wipe and retract
G1 X193.066 Y107.571 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X148.973 Y138.884 ; move to first perimeter point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X148.975 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E0.93304 ; perimeter
G1 X198.644 Y115.676 E1.45308 ; perimeter
G1 X198.964 Y115.366 E0.01834 ; perimeter
G1 X199.248 Y114.998 E0.01918 ; perimeter
G1 X199.473 Y114.594 E0.01903 ; perimeter
G1 X199.630 Y114.165 E0.01884 ; perimeter
G1 X199.714 Y113.720 E0.01864 ; perimeter
G1 X199.718 Y113.272 E0.01847 ; perimeter
G1 X199.638 Y112.834 E0.01834 ; perimeter
G1 X199.475 Y112.427 E0.01806 ; perimeter
G1 X199.294 Y112.149 E0.01366 ; perimeter
G1 X198.479 Y111.173 E0.05239 ; perimeter
G1 X198.988 Y110.746 E0.02736 ; perimeter
G1 X199.878 Y111.806 E0.05702 ; perimeter
G1 X200.100 Y112.122 E0.01590 ; perimeter
G1 X200.252 Y112.442 E0.01460 ; perimeter
G1 X200.353 Y112.796 E0.01518 ; perimeter
G1 X200.404 Y113.302 E0.02093 ; perimeter
G1 X200.392 Y113.597 E0.01215 ; perimeter
G1 X200.318 Y114.023 E0.01785 ; perimeter
G1 X200.147 Y114.543 E0.02252 ; perimeter
G1 X199.943 Y114.955 E0.01895 ; perimeter
G1 X199.720 Y115.298 E0.01686 ; perimeter
G1 X199.364 Y115.732 E0.02311 ; perimeter
G1 X198.992 Y116.083 E0.02109 ; perimeter
G1 X171.819 Y138.884 E1.46129 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X149.033 Y138.884 E0.66040 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.575 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X148.580 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E0.94337 ; perimeter
G1 X198.379 Y115.381 E1.44655 ; perimeter
G1 X198.668 Y115.102 E0.01657 ; perimeter
G1 X198.916 Y114.779 E0.01678 ; perimeter
G1 X199.111 Y114.428 E0.01654 ; perimeter
G1 X199.247 Y114.059 E0.01621 ; perimeter
G1 X199.318 Y113.681 E0.01584 ; perimeter
G1 X199.322 Y113.306 E0.01546 ; perimeter
G1 X199.256 Y112.944 E0.01513 ; perimeter
G1 X199.122 Y112.611 E0.01482 ; perimeter
G1 X198.975 Y112.385 E0.01110 ; perimeter
G1 X197.921 Y111.123 E0.06770 ; perimeter
G1 X199.037 Y110.187 E0.05997 ; perimeter
G1 X200.192 Y111.564 E0.07405 ; perimeter
G1 X200.441 Y111.919 E0.01785 ; perimeter
G1 X200.624 Y112.302 E0.01750 ; perimeter
G1 X200.744 Y112.721 E0.01795 ; perimeter
G1 X200.801 Y113.290 E0.02357 ; perimeter
G1 X200.787 Y113.639 E0.01438 ; perimeter
G1 X200.703 Y114.120 E0.02010 ; perimeter
G1 X200.514 Y114.693 E0.02486 ; perimeter
G1 X200.288 Y115.152 E0.02106 ; perimeter
G1 X200.040 Y115.533 E0.01873 ; perimeter
G1 X199.655 Y116.003 E0.02505 ; perimeter
G1 X199.255 Y116.379 E0.02261 ; perimeter
G1 X171.963 Y139.280 E1.46771 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X148.635 Y139.280 E0.66046 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.785 Y138.940 F10800.000 ; move inwards before travel
G1 F8640
G1 X148.580 Y137.952 E-0.30690 ; wipe and retract
G1 X150.542 Y137.952 E-0.45310 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
G1 X165.575 Y139.868 ; move to first infill point
G1 Z13.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.784 Y140.077 E0.01484 ; infill
G1 X166.469 Y140.077 E0.03448 ; infill
G1 X165.776 Y139.384 E0.04930 ; infill
G1 X165.776 Y139.061 E0.01627 ; infill
G1 X166.138 Y139.061 E0.01821 ; infill
G1 X167.153 Y140.077 E0.07230 ; infill
G1 X167.838 Y140.077 E0.03448 ; infill
G1 X166.823 Y139.061 E0.07230 ; infill
G1 X167.508 Y139.061 E0.03448 ; infill
G1 X168.523 Y140.077 E0.07230 ; infill
G1 X169.208 Y140.077 E0.03448 ; infill
G1 X168.193 Y139.061 E0.07230 ; infill
G1 X168.878 Y139.061 E0.03448 ; infill
G1 X169.660 Y139.843 E0.05567 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;14


G1 F8640
G1 X168.878 Y139.061 E-0.25535 ; wipe and retract
G1 X168.193 Y139.061 E-0.15815 ; wipe and retract
G1 X169.208 Y140.077 E-0.33164 ; wipe and retract
G1 X169.144 Y140.077 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;14
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q64 S50
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X100.416 Y100.738 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.64943 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X50.589 Y77.824 E1.46851 ; perimeter
G1 X50.215 Y77.472 E0.02117 ; perimeter
G1 X49.901 Y77.098 E0.02012 ; perimeter
G1 X49.639 Y76.699 E0.01965 ; perimeter
G1 X49.434 Y76.285 E0.01905 ; perimeter
G1 X49.288 Y75.864 E0.01834 ; perimeter
G1 X49.203 Y75.447 E0.01756 ; perimeter
G1 X49.177 Y75.046 E0.01655 ; perimeter
G1 X49.228 Y74.531 E0.02132 ; perimeter
G1 X49.326 Y74.190 E0.01459 ; perimeter
G1 X49.485 Y73.856 E0.01525 ; perimeter
G1 X49.639 Y73.635 E0.01109 ; perimeter
G1 X50.594 Y72.488 E0.06149 ; perimeter
G1 X51.100 Y72.913 E0.02721 ; perimeter
G1 X50.336 Y73.824 E0.04901 ; perimeter
G1 X50.108 Y74.164 E0.01685 ; perimeter
G1 X49.942 Y74.575 E0.01826 ; perimeter
G1 X49.862 Y75.013 E0.01834 ; perimeter
G1 X49.867 Y75.461 E0.01847 ; perimeter
G1 X49.950 Y75.906 E0.01864 ; perimeter
G1 X50.108 Y76.335 E0.01884 ; perimeter
G1 X50.333 Y76.739 E0.01903 ; perimeter
G1 X50.617 Y77.108 E0.01917 ; perimeter
G1 X50.936 Y77.417 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.46029 ; perimeter
G1 X100.415 Y100.203 E0.91965 ; perimeter
G1 X100.416 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.813 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.64946 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03671 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X50.325 Y78.121 E1.47492 ; perimeter
G1 X49.926 Y77.744 E0.02259 ; perimeter
G1 X49.582 Y77.335 E0.02203 ; perimeter
G1 X49.295 Y76.896 E0.02160 ; perimeter
G1 X49.068 Y76.438 E0.02106 ; perimeter
G1 X48.905 Y75.969 E0.02044 ; perimeter
G1 X48.809 Y75.499 E0.01977 ; perimeter
G1 X48.780 Y75.039 E0.01901 ; perimeter
G1 X48.837 Y74.457 E0.02406 ; perimeter
G1 X48.956 Y74.045 E0.01770 ; perimeter
G1 X49.141 Y73.657 E0.01770 ; perimeter
G1 X49.323 Y73.395 E0.01313 ; perimeter
G1 X50.545 Y71.929 E0.07860 ; perimeter
G1 X51.659 Y72.864 E0.05992 ; perimeter
G1 X50.653 Y74.063 E0.06447 ; perimeter
G1 X50.460 Y74.350 E0.01426 ; perimeter
G1 X50.325 Y74.686 E0.01489 ; perimeter
G1 X50.259 Y75.047 E0.01513 ; perimeter
G1 X50.263 Y75.422 E0.01546 ; perimeter
G1 X50.334 Y75.800 E0.01584 ; perimeter
G1 X50.469 Y76.170 E0.01621 ; perimeter
G1 X50.665 Y76.520 E0.01654 ; perimeter
G1 X50.913 Y76.843 E0.01678 ; perimeter
G1 X51.202 Y77.123 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.45377 ; perimeter
G1 X100.811 Y99.806 E0.93002 ; perimeter
G1 X100.813 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.413 Y101.126 F10800.000 ; move inwards before travel
G1 F8640
G1 X97.521 Y101.087 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X83.730 Y102.131 ; move to first infill point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.939 Y101.923 E0.01484 ; infill
G1 X83.939 Y101.238 E0.03448 ; infill
G1 X83.246 Y101.931 E0.04931 ; infill
G1 X82.561 Y101.931 E0.03448 ; infill
G1 X83.577 Y100.915 E0.07230 ; infill
G1 X82.892 Y100.915 E0.03448 ; infill
G1 X81.876 Y101.931 E0.07230 ; infill
G1 X81.191 Y101.931 E0.03448 ; infill
G1 X82.207 Y100.915 E0.07230 ; infill
G1 X81.522 Y100.915 E0.03448 ; infill
G1 X80.506 Y101.931 E0.07230 ; infill
G1 X80.256 Y101.931 E0.01260 ; infill
G1 X80.256 Y101.496 E0.02188 ; infill
G1 X81.038 Y100.714 E0.05566 ; infill
G1 F8640
G1 X80.256 Y101.496 E-0.25530 ; wipe and retract
G1 X80.256 Y101.931 E-0.10036 ; wipe and retract
G1 X80.506 Y101.931 E-0.05779 ; wipe and retract
G1 X81.522 Y100.915 E-0.33164 ; wipe and retract
G1 X81.587 Y100.915 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X57.110 Y71.028 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X54.512 Y68.848 E0.13975 ; perimeter
G1 X52.063 Y71.766 E0.15696 ; perimeter
G1 X51.555 Y71.341 E0.02729 ; perimeter
G1 X60.552 Y60.618 E0.57663 ; perimeter
G1 X61.060 Y61.044 E0.02729 ; perimeter
G1 X58.611 Y63.962 E0.15696 ; perimeter
G1 X61.209 Y66.143 E0.13975 ; perimeter
G1 X60.865 Y66.553 E0.02205 ; perimeter
G1 X58.267 Y64.373 E0.13975 ; perimeter
G1 X54.856 Y68.438 E0.21861 ; perimeter
G1 X57.454 Y70.618 E0.13975 ; perimeter
G1 X57.149 Y70.982 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.159 Y71.587 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X54.560 Y69.406 E0.13975 ; perimeter
G1 X52.111 Y72.325 E0.15696 ; perimeter
G1 X50.997 Y71.389 E0.05995 ; perimeter
G1 X60.503 Y60.060 E0.60929 ; perimeter
G1 X61.618 Y60.995 E0.05995 ; perimeter
G1 X59.169 Y63.914 E0.15696 ; perimeter
G1 X61.768 Y66.094 E0.13975 ; perimeter
G1 X60.914 Y67.111 E0.05471 ; perimeter
G1 X58.316 Y64.931 E0.13975 ; perimeter
G1 X55.414 Y68.389 E0.18596 ; perimeter
G1 X58.013 Y70.569 E0.13975 ; perimeter
G1 X57.198 Y71.541 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.887 Y71.294 F10800.000 ; move inwards before travel
G1 F8640
G1 X54.639 Y69.470 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X98.987 Y81.038 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.04695 ; perimeter
G1 X97.847 Y77.168 E0.15943 ; perimeter
G1 X98.987 Y77.168 E0.04695 ; perimeter
G1 X98.987 Y80.978 E0.15696 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.15621 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X65.286 Y60.316 E0.88477 ; perimeter
G1 X64.926 Y60.055 E0.01834 ; perimeter
G1 X64.514 Y59.839 E0.01917 ; perimeter
G1 X64.077 Y59.688 E0.01903 ; perimeter
G1 X63.627 Y59.607 E0.01884 ; perimeter
G1 X63.174 Y59.602 E0.01864 ; perimeter
G1 X62.732 Y59.675 E0.01847 ; perimeter
G1 X62.315 Y59.830 E0.01834 ; perimeter
G1 X62.101 Y59.963 E0.01039 ; perimeter
G1 X61.542 Y59.495 E0.03004 ; perimeter
G1 X61.823 Y59.295 E0.01419 ; perimeter
G1 X62.150 Y59.134 E0.01503 ; perimeter
G1 X62.652 Y58.993 E0.02146 ; perimeter
G1 X62.929 Y58.956 E0.01152 ; perimeter
G1 X63.360 Y58.954 E0.01778 ; perimeter
G1 X63.915 Y59.034 E0.02308 ; perimeter
G1 X64.354 Y59.163 E0.01884 ; perimeter
G1 X64.793 Y59.351 E0.01968 ; perimeter
G1 X65.155 Y59.560 E0.01723 ; perimeter
G1 X65.630 Y59.905 E0.02417 ; perimeter
G1 X81.934 Y73.586 E0.87678 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y76.771 E0.17003 ; perimeter
G1 X99.383 Y76.771 E0.07960 ; perimeter
G1 X99.383 Y81.374 E0.18961 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.17848 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X65.043 Y60.628 E0.89013 ; perimeter
G1 X64.717 Y60.392 E0.01657 ; perimeter
G1 X64.356 Y60.204 E0.01678 ; perimeter
G1 X63.977 Y60.072 E0.01654 ; perimeter
G1 X63.589 Y60.003 E0.01621 ; perimeter
G1 X63.205 Y59.998 E0.01584 ; perimeter
G1 X62.835 Y60.060 E0.01546 ; perimeter
G1 X62.490 Y60.188 E0.01513 ; perimeter
G1 X62.183 Y60.379 E0.01489 ; perimeter
G1 X62.088 Y60.470 E0.00544 ; perimeter
G1 X60.956 Y59.520 E0.06089 ; perimeter
G1 X61.272 Y59.200 E0.01853 ; perimeter
G1 X61.619 Y58.953 E0.01755 ; perimeter
G1 X62.008 Y58.762 E0.01786 ; perimeter
G1 X62.572 Y58.604 E0.02411 ; perimeter
G1 X62.902 Y58.560 E0.01372 ; perimeter
G1 X63.388 Y58.558 E0.02003 ; perimeter
G1 X63.999 Y58.646 E0.02545 ; perimeter
G1 X64.488 Y58.789 E0.02099 ; perimeter
G1 X64.970 Y58.996 E0.02161 ; perimeter
G1 X65.371 Y59.227 E0.01905 ; perimeter
G1 X65.874 Y59.592 E0.02561 ; perimeter
G1 X82.078 Y73.189 E0.87140 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y76.375 E0.17003 ; perimeter
G1 X99.780 Y76.375 E0.11226 ; perimeter
G1 X99.780 Y81.770 E0.22227 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.407 Y81.686 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.488 Y81.816 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X97.962 Y80.882 ; move to first infill point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7683.51
G1 X98.671 Y80.174 E0.04879 ; infill
G1 X98.671 Y79.511 E0.03227 ; infill
G1 X98.163 Y80.019 E0.03496 ; infill
G1 X98.163 Y79.356 E0.03227 ; infill
G1 X98.671 Y78.849 E0.03496 ; infill
G1 X98.671 Y78.186 E0.03227 ; infill
G1 X98.163 Y78.694 E0.03496 ; infill
G1 X98.163 Y78.031 E0.03227 ; infill
G1 X98.872 Y77.323 E0.04879 ; infill
G1 F8640
G1 X98.163 Y78.031 E-0.23134 ; wipe and retract
G1 X98.163 Y78.694 E-0.15300 ; wipe and retract
G1 X98.671 Y78.186 E-0.16575 ; wipe and retract
G1 X98.671 Y78.849 E-0.15300 ; wipe and retract
G1 X98.497 Y79.023 E-0.05690 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.099 Y86.962 E0.13387 ; perimeter
G1 X76.443 Y86.552 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.13387 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X83.120 Y78.595 E0.13387 ; perimeter
G1 X83.464 Y78.185 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.13387 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.541 Y87.011 E0.13387 ; perimeter
M73 P64 R48
G1 X76.395 Y85.994 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.13387 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.561 Y78.644 E0.13387 ; perimeter
G1 X83.415 Y77.627 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.13387 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.536 Y78.185 E0.13387 ; perimeter
G1 X166.880 Y78.595 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.13387 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.557 Y86.552 E0.13387 ; perimeter
G1 X173.901 Y86.962 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.13387 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X166.585 Y77.627 E0.13387 ; perimeter
G1 X167.380 Y78.574 E0.05094 ; perimeter
G1 X167.439 Y78.644 E0.00376 ; perimeter
G1 X164.949 Y80.733 E0.13387 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X173.605 Y85.994 E0.13387 ; perimeter
G1 X174.459 Y87.011 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.13387 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X151.013 Y81.038 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y77.168 E0.15943 ; perimeter
G1 X152.153 Y77.168 E0.04695 ; perimeter
G1 X152.153 Y81.038 E0.15943 ; perimeter
G1 X151.073 Y81.038 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.617 Y76.771 E0.19208 ; perimeter
G1 X152.549 Y76.771 E0.07960 ; perimeter
G1 X152.549 Y80.899 E0.17003 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X184.370 Y59.905 E0.87678 ; perimeter
G1 X184.845 Y59.560 E0.02417 ; perimeter
G1 X185.207 Y59.351 E0.01723 ; perimeter
G1 X185.646 Y59.163 E0.01968 ; perimeter
G1 X186.090 Y59.033 E0.01905 ; perimeter
G1 X186.524 Y58.963 E0.01812 ; perimeter
G1 X187.071 Y58.957 E0.02253 ; perimeter
G1 X187.475 Y59.017 E0.01683 ; perimeter
G1 X187.834 Y59.126 E0.01545 ; perimeter
G1 X188.177 Y59.295 E0.01577 ; perimeter
G1 X188.458 Y59.495 E0.01419 ; perimeter
G1 X187.899 Y59.963 E0.03004 ; perimeter
G1 X187.685 Y59.830 E0.01039 ; perimeter
G1 X187.268 Y59.675 E0.01834 ; perimeter
G1 X186.826 Y59.602 E0.01847 ; perimeter
G1 X186.373 Y59.607 E0.01864 ; perimeter
G1 X185.923 Y59.688 E0.01884 ; perimeter
G1 X185.486 Y59.839 E0.01903 ; perimeter
G1 X185.078 Y60.053 E0.01900 ; perimeter
G1 X184.806 Y60.244 E0.01367 ; perimeter
G1 X168.261 Y74.121 E0.88960 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X150.677 Y81.434 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X150.220 Y76.375 E0.22474 ; perimeter
G1 X152.945 Y76.375 E0.11226 ; perimeter
G1 X152.945 Y80.502 E0.17003 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X184.126 Y59.592 E0.87140 ; perimeter
G1 X184.629 Y59.227 E0.02561 ; perimeter
G1 X185.030 Y58.996 E0.01905 ; perimeter
G1 X185.512 Y58.789 E0.02161 ; perimeter
G1 X186.002 Y58.645 E0.02106 ; perimeter
G1 X186.490 Y58.567 E0.02036 ; perimeter
G1 X187.098 Y58.560 E0.02504 ; perimeter
G1 X187.560 Y58.629 E0.01924 ; perimeter
G1 X187.872 Y58.720 E0.01337 ; perimeter
G1 X188.381 Y58.953 E0.02308 ; perimeter
G1 X188.728 Y59.200 E0.01755 ; perimeter
G1 X189.044 Y59.520 E0.01853 ; perimeter
G1 X187.912 Y60.470 E0.06089 ; perimeter
G1 X187.817 Y60.379 E0.00544 ; perimeter
G1 X187.510 Y60.188 E0.01489 ; perimeter
G1 X187.165 Y60.060 E0.01513 ; perimeter
G1 X186.795 Y59.998 E0.01546 ; perimeter
G1 X186.411 Y60.003 E0.01584 ; perimeter
G1 X186.023 Y60.072 E0.01621 ; perimeter
G1 X185.644 Y60.204 E0.01654 ; perimeter
G1 X185.285 Y60.392 E0.01671 ; perimeter
G1 X185.048 Y60.558 E0.01191 ; perimeter
G1 X168.405 Y74.517 E0.89485 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X150.280 Y81.830 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.359 Y81.455 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.244 Y78.539 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X151.128 Y80.882 ; move to first infill point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7683.51
G1 X151.837 Y80.174 E0.04879 ; infill
G1 X151.837 Y79.511 E0.03227 ; infill
G1 X151.329 Y80.019 E0.03496 ; infill
G1 X151.329 Y79.356 E0.03227 ; infill
G1 X151.837 Y78.849 E0.03496 ; infill
G1 X151.837 Y78.186 E0.03227 ; infill
G1 X151.329 Y78.694 E0.03496 ; infill
G1 X151.329 Y78.031 E0.03227 ; infill
G1 X152.038 Y77.323 E0.04879 ; infill
G1 F8640
G1 X151.329 Y78.031 E-0.23134 ; wipe and retract
G1 X151.329 Y78.694 E-0.15300 ; wipe and retract
G1 X151.837 Y78.186 E-0.16575 ; wipe and retract
G1 X151.837 Y78.849 E-0.15300 ; wipe and retract
G1 X151.662 Y79.023 E-0.05691 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X192.890 Y71.028 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X192.546 Y70.618 E0.02205 ; perimeter
G1 X195.144 Y68.438 E0.13975 ; perimeter
G1 X191.733 Y64.373 E0.21861 ; perimeter
G1 X189.135 Y66.553 E0.13975 ; perimeter
G1 X188.791 Y66.143 E0.02205 ; perimeter
G1 X191.389 Y63.962 E0.13975 ; perimeter
G1 X188.940 Y61.044 E0.15696 ; perimeter
G1 X189.448 Y60.618 E0.02729 ; perimeter
G1 X198.445 Y71.341 E0.57663 ; perimeter
G1 X197.937 Y71.766 E0.02729 ; perimeter
G1 X195.488 Y68.848 E0.15696 ; perimeter
G1 X192.936 Y70.990 E0.13728 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.841 Y71.587 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X191.987 Y70.569 E0.05471 ; perimeter
G1 X194.586 Y68.389 E0.13975 ; perimeter
G1 X191.684 Y64.931 E0.18596 ; perimeter
G1 X189.086 Y67.111 E0.13975 ; perimeter
G1 X188.232 Y66.094 E0.05471 ; perimeter
G1 X190.831 Y63.914 E0.13975 ; perimeter
G1 X188.382 Y60.995 E0.15696 ; perimeter
G1 X189.497 Y60.060 E0.05995 ; perimeter
G1 X199.003 Y71.389 E0.60929 ; perimeter
G1 X197.889 Y72.325 E0.05995 ; perimeter
G1 X195.440 Y69.406 E0.15696 ; perimeter
G1 X192.887 Y71.548 E0.13728 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.883 Y71.189 F10800.000 ; move inwards before travel
G1 F8640
G1 X191.987 Y70.569 E-0.30695 ; wipe and retract
G1 X193.490 Y69.308 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X149.584 Y100.738 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X149.585 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E0.91965 ; perimeter
G1 X199.064 Y77.417 E1.46029 ; perimeter
G1 X199.383 Y77.108 E0.01834 ; perimeter
G1 X199.667 Y76.739 E0.01918 ; perimeter
G1 X199.892 Y76.335 E0.01903 ; perimeter
G1 X200.050 Y75.906 E0.01884 ; perimeter
G1 X200.133 Y75.461 E0.01864 ; perimeter
G1 X200.138 Y75.013 E0.01847 ; perimeter
G1 X200.058 Y74.575 E0.01834 ; perimeter
G1 X199.894 Y74.168 E0.01807 ; perimeter
G1 X199.711 Y73.887 E0.01380 ; perimeter
G1 X198.898 Y72.914 E0.05224 ; perimeter
G1 X199.407 Y72.487 E0.02736 ; perimeter
G1 X200.297 Y73.547 E0.05703 ; perimeter
G1 X200.518 Y73.862 E0.01585 ; perimeter
G1 X200.670 Y74.181 E0.01456 ; perimeter
G1 X200.772 Y74.534 E0.01512 ; perimeter
G1 X200.823 Y75.052 E0.02146 ; perimeter
G1 X200.812 Y75.332 E0.01152 ; perimeter
G1 X200.739 Y75.757 E0.01778 ; perimeter
G1 X200.564 Y76.289 E0.02308 ; perimeter
G1 X200.360 Y76.700 E0.01889 ; perimeter
G1 X200.147 Y77.028 E0.01610 ; perimeter
G1 X199.782 Y77.475 E0.02377 ; perimeter
G1 X199.411 Y77.824 E0.02100 ; perimeter
G1 X172.104 Y100.738 E1.46851 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X149.644 Y100.738 E0.64696 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.187 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.189 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E0.93002 ; perimeter
G1 X198.798 Y77.123 E1.45377 ; perimeter
G1 X199.087 Y76.843 E0.01657 ; perimeter
G1 X199.335 Y76.520 E0.01678 ; perimeter
G1 X199.531 Y76.170 E0.01654 ; perimeter
G1 X199.666 Y75.800 E0.01621 ; perimeter
G1 X199.737 Y75.422 E0.01584 ; perimeter
G1 X199.741 Y75.047 E0.01546 ; perimeter
G1 X199.675 Y74.686 E0.01513 ; perimeter
G1 X199.541 Y74.352 E0.01482 ; perimeter
G1 X199.392 Y74.123 E0.01123 ; perimeter
G1 X198.341 Y72.864 E0.06756 ; perimeter
G1 X199.456 Y71.929 E0.05997 ; perimeter
G1 X200.611 Y73.306 E0.07405 ; perimeter
G1 X200.860 Y73.659 E0.01780 ; perimeter
G1 X201.042 Y74.041 E0.01745 ; perimeter
G1 X201.163 Y74.459 E0.01789 ; perimeter
G1 X201.221 Y75.041 E0.02411 ; perimeter
G1 X201.206 Y75.374 E0.01372 ; perimeter
G1 X201.124 Y75.853 E0.02003 ; perimeter
G1 X200.931 Y76.440 E0.02545 ; perimeter
G1 X200.705 Y76.897 E0.02101 ; perimeter
G1 X200.468 Y77.262 E0.01795 ; perimeter
G1 X200.073 Y77.745 E0.02572 ; perimeter
G1 X199.675 Y78.121 E0.02253 ; perimeter
G1 X172.248 Y101.134 E1.47492 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X149.247 Y101.134 E0.64698 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.397 Y100.794 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.189 Y99.806 E-0.30693 ; wipe and retract
G1 X151.151 Y99.806 E-0.45307 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X166.843 Y100.714 ; move to first infill point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.061 Y101.496 E0.05566 ; infill
G1 X166.061 Y101.931 E0.02188 ; infill
G1 X166.312 Y101.931 E0.01260 ; infill
G1 X167.327 Y100.915 E0.07230 ; infill
G1 X168.012 Y100.915 E0.03448 ; infill
G1 X166.996 Y101.931 E0.07230 ; infill
G1 X167.681 Y101.931 E0.03448 ; infill
G1 X168.697 Y100.915 E0.07230 ; infill
G1 X169.382 Y100.915 E0.03448 ; infill
G1 X168.366 Y101.931 E0.07230 ; infill
G1 X169.051 Y101.931 E0.03448 ; infill
G1 X169.744 Y101.238 E0.04931 ; infill
G1 X169.744 Y101.923 E0.03448 ; infill
G1 X169.535 Y102.131 E0.01484 ; infill
G1 F8640
G1 X169.744 Y101.923 E-0.06809 ; wipe and retract
G1 X169.744 Y101.238 E-0.15815 ; wipe and retract
G1 X169.051 Y101.931 E-0.22616 ; wipe and retract
G1 X168.366 Y101.931 E-0.15815 ; wipe and retract
G1 X168.824 Y101.473 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X100.130 Y138.884 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.64943 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X50.304 Y115.971 E1.46851 ; perimeter
G1 X49.930 Y115.618 E0.02117 ; perimeter
G1 X49.616 Y115.244 E0.02012 ; perimeter
G1 X49.354 Y114.845 E0.01965 ; perimeter
G1 X49.149 Y114.431 E0.01905 ; perimeter
G1 X49.003 Y114.010 E0.01834 ; perimeter
G1 X48.918 Y113.593 E0.01756 ; perimeter
G1 X48.892 Y113.192 E0.01655 ; perimeter
G1 X48.943 Y112.677 E0.02132 ; perimeter
G1 X49.041 Y112.336 E0.01459 ; perimeter
G1 X49.200 Y112.002 E0.01525 ; perimeter
G1 X49.353 Y111.781 E0.01109 ; perimeter
G1 X50.309 Y110.634 E0.06149 ; perimeter
G1 X50.815 Y111.059 E0.02721 ; perimeter
G1 X50.051 Y111.970 E0.04901 ; perimeter
G1 X49.822 Y112.310 E0.01685 ; perimeter
G1 X49.657 Y112.721 E0.01826 ; perimeter
G1 X49.577 Y113.159 E0.01834 ; perimeter
G1 X49.581 Y113.607 E0.01847 ; perimeter
G1 X49.665 Y114.052 E0.01864 ; perimeter
G1 X49.823 Y114.481 E0.01884 ; perimeter
G1 X50.047 Y114.885 E0.01903 ; perimeter
G1 X50.332 Y115.254 E0.01917 ; perimeter
G1 X50.651 Y115.563 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.46029 ; perimeter
G1 X100.130 Y138.349 E0.91965 ; perimeter
G1 X100.130 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.527 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.64946 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03671 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X50.040 Y116.267 E1.47492 ; perimeter
G1 X49.641 Y115.891 E0.02259 ; perimeter
G1 X49.297 Y115.481 E0.02203 ; perimeter
G1 X49.009 Y115.043 E0.02160 ; perimeter
G1 X48.783 Y114.584 E0.02106 ; perimeter
G1 X48.620 Y114.115 E0.02044 ; perimeter
G1 X48.524 Y113.645 E0.01977 ; perimeter
G1 X48.494 Y113.185 E0.01901 ; perimeter
G1 X48.552 Y112.604 E0.02406 ; perimeter
G1 X48.671 Y112.191 E0.01770 ; perimeter
G1 X48.856 Y111.803 E0.01770 ; perimeter
G1 X49.038 Y111.541 E0.01313 ; perimeter
G1 X50.259 Y110.075 E0.07860 ; perimeter
G1 X51.374 Y111.010 E0.05992 ; perimeter
G1 X50.368 Y112.209 E0.06447 ; perimeter
G1 X50.175 Y112.496 E0.01426 ; perimeter
G1 X50.040 Y112.832 E0.01489 ; perimeter
G1 X49.974 Y113.193 E0.01513 ; perimeter
G1 X49.977 Y113.568 E0.01546 ; perimeter
G1 X50.049 Y113.946 E0.01584 ; perimeter
G1 X50.184 Y114.316 E0.01621 ; perimeter
G1 X50.379 Y114.666 E0.01654 ; perimeter
G1 X50.628 Y114.989 E0.01678 ; perimeter
G1 X50.917 Y115.269 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.45377 ; perimeter
G1 X100.526 Y137.952 E0.93002 ; perimeter
G1 X100.527 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.127 Y139.273 F10800.000 ; move inwards before travel
G1 F8640
G1 X97.236 Y139.233 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X83.445 Y140.278 ; move to first infill point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.654 Y140.069 E0.01484 ; infill
G1 X83.654 Y139.384 E0.03448 ; infill
G1 X82.961 Y140.077 E0.04931 ; infill
G1 X82.276 Y140.077 E0.03448 ; infill
G1 X83.292 Y139.061 E0.07230 ; infill
G1 X82.607 Y139.061 E0.03448 ; infill
G1 X81.591 Y140.077 E0.07230 ; infill
G1 X80.906 Y140.077 E0.03448 ; infill
G1 X81.922 Y139.061 E0.07230 ; infill
G1 X81.237 Y139.061 E0.03448 ; infill
G1 X80.221 Y140.077 E0.07230 ; infill
G1 X79.971 Y140.077 E0.01260 ; infill
G1 X79.971 Y139.642 E0.02188 ; infill
G1 X80.753 Y138.860 E0.05566 ; infill
G1 F8640
G1 X79.971 Y139.642 E-0.25530 ; wipe and retract
G1 X79.971 Y140.077 E-0.10036 ; wipe and retract
G1 X80.221 Y140.077 E-0.05779 ; wipe and retract
G1 X81.237 Y139.061 E-0.33164 ; wipe and retract
G1 X81.301 Y139.061 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X56.825 Y109.174 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X54.226 Y106.994 E0.13975 ; perimeter
G1 X51.777 Y109.913 E0.15696 ; perimeter
G1 X51.270 Y109.487 E0.02729 ; perimeter
G1 X60.267 Y98.764 E0.57663 ; perimeter
G1 X60.775 Y99.190 E0.02729 ; perimeter
G1 X58.326 Y102.109 E0.15696 ; perimeter
G1 X60.924 Y104.289 E0.13975 ; perimeter
G1 X60.580 Y104.699 E0.02205 ; perimeter
G1 X57.982 Y102.519 E0.13975 ; perimeter
G1 X54.570 Y106.584 E0.21861 ; perimeter
G1 X57.169 Y108.764 E0.13975 ; perimeter
G1 X56.864 Y109.128 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.874 Y109.733 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X54.275 Y107.552 E0.13975 ; perimeter
G1 X51.826 Y110.471 E0.15696 ; perimeter
G1 X50.711 Y109.536 E0.05995 ; perimeter
G1 X60.218 Y98.206 E0.60929 ; perimeter
G1 X61.333 Y99.141 E0.05995 ; perimeter
G1 X58.884 Y102.060 E0.15696 ; perimeter
G1 X61.483 Y104.240 E0.13975 ; perimeter
G1 X60.629 Y105.258 E0.05471 ; perimeter
G1 X58.030 Y103.077 E0.13975 ; perimeter
G1 X55.129 Y106.535 E0.18596 ; perimeter
G1 X57.727 Y108.716 E0.13975 ; perimeter
G1 X56.912 Y109.687 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.602 Y109.440 F10800.000 ; move inwards before travel
G1 F8640
G1 X54.354 Y107.616 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X98.702 Y119.184 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.04695 ; perimeter
G1 X97.562 Y115.314 E0.15943 ; perimeter
G1 X98.702 Y115.314 E0.04695 ; perimeter
G1 X98.702 Y119.124 E0.15696 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.15621 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X65.001 Y98.462 E0.88477 ; perimeter
G1 X64.641 Y98.201 E0.01834 ; perimeter
G1 X64.228 Y97.985 E0.01917 ; perimeter
G1 X63.792 Y97.834 E0.01903 ; perimeter
G1 X63.342 Y97.753 E0.01884 ; perimeter
G1 X62.889 Y97.748 E0.01864 ; perimeter
G1 X62.447 Y97.822 E0.01847 ; perimeter
G1 X62.030 Y97.976 E0.01834 ; perimeter
G1 X61.815 Y98.110 E0.01039 ; perimeter
G1 X61.257 Y97.641 E0.03004 ; perimeter
G1 X61.537 Y97.441 E0.01419 ; perimeter
G1 X61.865 Y97.280 E0.01503 ; perimeter
G1 X62.367 Y97.139 E0.02146 ; perimeter
G1 X62.644 Y97.103 E0.01152 ; perimeter
G1 X63.075 Y97.101 E0.01778 ; perimeter
G1 X63.630 Y97.180 E0.02308 ; perimeter
G1 X64.069 Y97.309 E0.01884 ; perimeter
G1 X64.507 Y97.498 E0.01968 ; perimeter
G1 X64.870 Y97.706 E0.01723 ; perimeter
G1 X65.345 Y98.051 E0.02417 ; perimeter
G1 X81.649 Y111.732 E0.87678 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y114.917 E0.17003 ; perimeter
G1 X99.098 Y114.917 E0.07960 ; perimeter
G1 X99.098 Y119.520 E0.18961 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.17848 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X64.757 Y98.774 E0.89013 ; perimeter
G1 X64.432 Y98.539 E0.01657 ; perimeter
G1 X64.071 Y98.350 E0.01678 ; perimeter
G1 X63.691 Y98.219 E0.01654 ; perimeter
G1 X63.304 Y98.149 E0.01621 ; perimeter
G1 X62.920 Y98.145 E0.01584 ; perimeter
G1 X62.549 Y98.206 E0.01546 ; perimeter
G1 X62.205 Y98.334 E0.01513 ; perimeter
G1 X61.898 Y98.525 E0.01489 ; perimeter
G1 X61.803 Y98.616 E0.00544 ; perimeter
G1 X60.671 Y97.666 E0.06089 ; perimeter
G1 X60.987 Y97.347 E0.01853 ; perimeter
G1 X61.334 Y97.099 E0.01755 ; perimeter
G1 X61.723 Y96.908 E0.01786 ; perimeter
G1 X62.286 Y96.750 E0.02411 ; perimeter
G1 X62.617 Y96.706 E0.01372 ; perimeter
G1 X63.103 Y96.704 E0.02003 ; perimeter
G1 X63.714 Y96.792 E0.02545 ; perimeter
G1 X64.203 Y96.935 E0.02099 ; perimeter
G1 X64.685 Y97.143 E0.02161 ; perimeter
G1 X65.086 Y97.373 E0.01905 ; perimeter
G1 X65.589 Y97.739 E0.02561 ; perimeter
G1 X81.793 Y111.335 E0.87140 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y114.521 E0.17003 ; perimeter
M73 Q64 S49
G1 X99.494 Y114.521 E0.11226 ; perimeter
G1 X99.494 Y119.916 E0.22227 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.121 Y119.832 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.203 Y119.962 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X97.677 Y119.029 ; move to first infill point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7683.51
G1 X98.386 Y118.320 E0.04879 ; infill
G1 X98.386 Y117.657 E0.03227 ; infill
G1 X97.878 Y118.165 E0.03496 ; infill
G1 X97.878 Y117.502 E0.03227 ; infill
G1 X98.386 Y116.995 E0.03496 ; infill
G1 X98.386 Y116.332 E0.03227 ; infill
G1 X97.878 Y116.840 E0.03496 ; infill
G1 X97.878 Y116.177 E0.03227 ; infill
G1 X98.587 Y115.469 E0.04879 ; infill
G1 F8640
G1 X97.878 Y116.177 E-0.23134 ; wipe and retract
G1 X97.878 Y116.840 E-0.15300 ; wipe and retract
G1 X98.386 Y116.332 E-0.16575 ; wipe and retract
G1 X98.386 Y116.995 E-0.15300 ; wipe and retract
G1 X98.211 Y117.169 E-0.05690 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.814 Y125.108 E0.13387 ; perimeter
G1 X76.158 Y124.698 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.13387 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.835 Y116.741 E0.13387 ; perimeter
G1 X83.179 Y116.331 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.13387 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.256 Y125.157 E0.13387 ; perimeter
G1 X76.109 Y124.140 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.13387 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X82.276 Y116.790 E0.13387 ; perimeter
G1 X83.130 Y115.773 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.13387 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.251 Y116.331 E0.13387 ; perimeter
G1 X166.595 Y116.741 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.13387 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.271 Y124.698 E0.13387 ; perimeter
G1 X173.615 Y125.108 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.13387 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.300 Y115.773 E0.13387 ; perimeter
G1 X167.095 Y116.720 E0.05094 ; perimeter
G1 X167.153 Y116.790 E0.00376 ; perimeter
G1 X164.664 Y118.879 E0.13387 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.320 Y124.140 E0.13387 ; perimeter
G1 X174.174 Y125.157 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.13387 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X150.728 Y119.184 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y115.314 E0.15943 ; perimeter
G1 X151.868 Y115.314 E0.04695 ; perimeter
G1 X151.868 Y119.184 E0.15943 ; perimeter
G1 X150.788 Y119.184 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.332 Y114.917 E0.19208 ; perimeter
G1 X152.264 Y114.917 E0.07960 ; perimeter
G1 X152.264 Y119.045 E0.17003 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X184.085 Y98.051 E0.87678 ; perimeter
G1 X184.560 Y97.706 E0.02417 ; perimeter
G1 X184.922 Y97.498 E0.01723 ; perimeter
G1 X185.361 Y97.309 E0.01968 ; perimeter
G1 X185.805 Y97.179 E0.01905 ; perimeter
G1 X186.239 Y97.109 E0.01812 ; perimeter
G1 X186.786 Y97.103 E0.02253 ; perimeter
G1 X187.190 Y97.163 E0.01683 ; perimeter
G1 X187.549 Y97.272 E0.01545 ; perimeter
G1 X187.892 Y97.441 E0.01577 ; perimeter
G1 X188.173 Y97.641 E0.01419 ; perimeter
G1 X187.614 Y98.110 E0.03004 ; perimeter
G1 X187.400 Y97.976 E0.01039 ; perimeter
G1 X186.983 Y97.822 E0.01834 ; perimeter
G1 X186.541 Y97.748 E0.01847 ; perimeter
G1 X186.088 Y97.753 E0.01864 ; perimeter
G1 X185.638 Y97.834 E0.01884 ; perimeter
G1 X185.201 Y97.985 E0.01903 ; perimeter
G1 X184.793 Y98.199 E0.01900 ; perimeter
G1 X184.521 Y98.390 E0.01367 ; perimeter
G1 X167.976 Y112.267 E0.88960 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X150.392 Y119.580 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.935 Y114.521 E0.22474 ; perimeter
G1 X152.660 Y114.521 E0.11226 ; perimeter
G1 X152.660 Y118.648 E0.17003 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X183.841 Y97.739 E0.87140 ; perimeter
G1 X184.344 Y97.373 E0.02561 ; perimeter
G1 X184.744 Y97.143 E0.01905 ; perimeter
G1 X185.226 Y96.935 E0.02161 ; perimeter
G1 X185.717 Y96.792 E0.02106 ; perimeter
G1 X186.205 Y96.713 E0.02036 ; perimeter
G1 X186.813 Y96.707 E0.02504 ; perimeter
G1 X187.275 Y96.775 E0.01924 ; perimeter
G1 X187.586 Y96.866 E0.01337 ; perimeter
G1 X188.096 Y97.099 E0.02308 ; perimeter
G1 X188.443 Y97.347 E0.01755 ; perimeter
G1 X188.759 Y97.666 E0.01853 ; perimeter
G1 X187.627 Y98.616 E0.06089 ; perimeter
G1 X187.532 Y98.525 E0.00544 ; perimeter
G1 X187.225 Y98.334 E0.01489 ; perimeter
G1 X186.880 Y98.206 E0.01513 ; perimeter
G1 X186.510 Y98.145 E0.01546 ; perimeter
G1 X186.126 Y98.149 E0.01584 ; perimeter
G1 X185.738 Y98.219 E0.01621 ; perimeter
G1 X185.359 Y98.350 E0.01654 ; perimeter
G1 X184.999 Y98.538 E0.01671 ; perimeter
G1 X184.763 Y98.704 E0.01191 ; perimeter
G1 X168.120 Y112.663 E0.89485 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X149.995 Y119.976 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.074 Y119.601 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.959 Y116.685 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X150.843 Y119.029 ; move to first infill point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7683.51
G1 X151.552 Y118.320 E0.04879 ; infill
G1 X151.552 Y117.657 E0.03227 ; infill
G1 X151.044 Y118.165 E0.03496 ; infill
G1 X151.044 Y117.502 E0.03227 ; infill
G1 X151.552 Y116.995 E0.03496 ; infill
G1 X151.552 Y116.332 E0.03227 ; infill
G1 X151.044 Y116.840 E0.03496 ; infill
G1 X151.044 Y116.177 E0.03227 ; infill
G1 X151.752 Y115.469 E0.04879 ; infill
G1 F8640
G1 X151.044 Y116.177 E-0.23134 ; wipe and retract
G1 X151.044 Y116.840 E-0.15300 ; wipe and retract
G1 X151.552 Y116.332 E-0.16575 ; wipe and retract
G1 X151.552 Y116.995 E-0.15300 ; wipe and retract
G1 X151.377 Y117.169 E-0.05691 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X192.605 Y109.174 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X192.261 Y108.764 E0.02205 ; perimeter
G1 X194.859 Y106.584 E0.13975 ; perimeter
G1 X191.448 Y102.519 E0.21861 ; perimeter
G1 X188.849 Y104.699 E0.13975 ; perimeter
G1 X188.505 Y104.289 E0.02205 ; perimeter
G1 X191.104 Y102.109 E0.13975 ; perimeter
G1 X188.655 Y99.190 E0.15696 ; perimeter
G1 X189.163 Y98.764 E0.02729 ; perimeter
G1 X198.160 Y109.487 E0.57663 ; perimeter
G1 X197.652 Y109.913 E0.02729 ; perimeter
G1 X195.203 Y106.994 E0.15696 ; perimeter
G1 X192.651 Y109.136 E0.13728 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.556 Y109.733 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X191.702 Y108.716 E0.05471 ; perimeter
G1 X194.301 Y106.535 E0.13975 ; perimeter
G1 X191.399 Y103.077 E0.18596 ; perimeter
G1 X188.801 Y105.258 E0.13975 ; perimeter
G1 X187.947 Y104.240 E0.05471 ; perimeter
G1 X190.546 Y102.060 E0.13975 ; perimeter
G1 X188.097 Y99.141 E0.15696 ; perimeter
G1 X189.211 Y98.206 E0.05995 ; perimeter
G1 X198.718 Y109.536 E0.60929 ; perimeter
G1 X197.603 Y110.471 E0.05995 ; perimeter
G1 X195.154 Y107.552 E0.15696 ; perimeter
G1 X192.602 Y109.694 E0.13728 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.598 Y109.335 F10800.000 ; move inwards before travel
G1 F8640
G1 X191.702 Y108.716 E-0.30695 ; wipe and retract
G1 X193.205 Y107.454 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X149.299 Y138.884 ; move to first perimeter point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X149.300 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E0.91965 ; perimeter
G1 X198.778 Y115.563 E1.46029 ; perimeter
M73 P65 R47
G1 X199.098 Y115.254 E0.01834 ; perimeter
G1 X199.382 Y114.885 E0.01918 ; perimeter
G1 X199.607 Y114.481 E0.01903 ; perimeter
G1 X199.764 Y114.052 E0.01884 ; perimeter
G1 X199.848 Y113.607 E0.01864 ; perimeter
G1 X199.852 Y113.159 E0.01847 ; perimeter
G1 X199.772 Y112.721 E0.01834 ; perimeter
G1 X199.609 Y112.314 E0.01807 ; perimeter
G1 X199.426 Y112.033 E0.01380 ; perimeter
G1 X198.613 Y111.060 E0.05224 ; perimeter
G1 X199.122 Y110.633 E0.02736 ; perimeter
G1 X200.012 Y111.694 E0.05703 ; perimeter
G1 X200.233 Y112.008 E0.01585 ; perimeter
G1 X200.385 Y112.327 E0.01456 ; perimeter
G1 X200.487 Y112.680 E0.01512 ; perimeter
G1 X200.538 Y113.198 E0.02146 ; perimeter
G1 X200.526 Y113.478 E0.01152 ; perimeter
G1 X200.453 Y113.903 E0.01778 ; perimeter
G1 X200.278 Y114.435 E0.02308 ; perimeter
G1 X200.075 Y114.846 E0.01889 ; perimeter
G1 X199.862 Y115.174 E0.01610 ; perimeter
G1 X199.497 Y115.621 E0.02377 ; perimeter
G1 X199.126 Y115.971 E0.02100 ; perimeter
G1 X171.819 Y138.884 E1.46851 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X149.359 Y138.884 E0.64696 ; perimeter
M204 S1000 ; adjust acceleration
G1 X148.902 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X148.904 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E0.93002 ; perimeter
G1 X198.513 Y115.269 E1.45377 ; perimeter
G1 X198.802 Y114.989 E0.01657 ; perimeter
G1 X199.050 Y114.666 E0.01678 ; perimeter
G1 X199.245 Y114.316 E0.01654 ; perimeter
G1 X199.381 Y113.946 E0.01621 ; perimeter
G1 X199.452 Y113.568 E0.01584 ; perimeter
G1 X199.456 Y113.193 E0.01546 ; perimeter
G1 X199.390 Y112.832 E0.01513 ; perimeter
G1 X199.256 Y112.498 E0.01482 ; perimeter
G1 X199.107 Y112.269 E0.01123 ; perimeter
G1 X198.056 Y111.011 E0.06756 ; perimeter
G1 X199.171 Y110.075 E0.05997 ; perimeter
G1 X200.326 Y111.452 E0.07405 ; perimeter
G1 X200.575 Y111.805 E0.01780 ; perimeter
G1 X200.757 Y112.187 E0.01745 ; perimeter
G1 X200.877 Y112.605 E0.01789 ; perimeter
G1 X200.935 Y113.187 E0.02411 ; perimeter
G1 X200.921 Y113.520 E0.01372 ; perimeter
G1 X200.839 Y113.999 E0.02003 ; perimeter
G1 X200.646 Y114.586 E0.02545 ; perimeter
G1 X200.420 Y115.043 E0.02101 ; perimeter
G1 X200.182 Y115.408 E0.01795 ; perimeter
G1 X199.787 Y115.892 E0.02572 ; perimeter
G1 X199.390 Y116.267 E0.02253 ; perimeter
G1 X171.963 Y139.280 E1.47492 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X148.962 Y139.280 E0.64698 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.112 Y138.940 F10800.000 ; move inwards before travel
G1 F8640
G1 X148.904 Y137.952 E-0.30693 ; wipe and retract
G1 X150.866 Y137.952 E-0.45307 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
G1 X166.558 Y138.860 ; move to first infill point
G1 Z14.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.776 Y139.642 E0.05566 ; infill
G1 X165.776 Y140.077 E0.02188 ; infill
G1 X166.026 Y140.077 E0.01260 ; infill
G1 X167.042 Y139.061 E0.07230 ; infill
G1 X167.727 Y139.061 E0.03448 ; infill
G1 X166.711 Y140.077 E0.07230 ; infill
G1 X167.396 Y140.077 E0.03448 ; infill
G1 X168.412 Y139.061 E0.07230 ; infill
G1 X169.097 Y139.061 E0.03448 ; infill
G1 X168.081 Y140.077 E0.07230 ; infill
G1 X168.766 Y140.077 E0.03448 ; infill
G1 X169.459 Y139.384 E0.04931 ; infill
G1 X169.459 Y140.069 E0.03448 ; infill
G1 X169.250 Y140.278 E0.01484 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;14.25


G1 F8640
G1 X169.459 Y140.069 E-0.06809 ; wipe and retract
G1 X169.459 Y139.384 E-0.15815 ; wipe and retract
G1 X168.766 Y140.077 E-0.22616 ; wipe and retract
G1 X168.081 Y140.077 E-0.15815 ; wipe and retract
G1 X168.539 Y139.619 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;14.25
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X100.100 Y100.738 ; move to first perimeter point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.63642 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X50.455 Y77.712 E1.47572 ; perimeter
G1 X50.082 Y77.360 E0.02111 ; perimeter
G1 X49.768 Y76.988 E0.02006 ; perimeter
G1 X49.507 Y76.590 E0.01960 ; perimeter
G1 X49.302 Y76.177 E0.01900 ; perimeter
G1 X49.156 Y75.757 E0.01830 ; perimeter
G1 X49.070 Y75.341 E0.01752 ; perimeter
G1 X49.043 Y74.936 E0.01673 ; perimeter
G1 X49.074 Y74.549 E0.01597 ; perimeter
G1 X49.193 Y74.075 E0.02012 ; perimeter
G1 X49.352 Y73.743 E0.01519 ; perimeter
G1 X49.507 Y73.518 E0.01126 ; perimeter
G1 X50.460 Y72.376 E0.06128 ; perimeter
G1 X50.966 Y72.800 E0.02722 ; perimeter
G1 X50.202 Y73.712 E0.04901 ; perimeter
G1 X49.974 Y74.051 E0.01685 ; perimeter
G1 X49.808 Y74.462 E0.01826 ; perimeter
G1 X49.728 Y74.900 E0.01834 ; perimeter
G1 X49.732 Y75.349 E0.01847 ; perimeter
G1 X49.798 Y75.697 E0.01459 ; perimeter
G1 X49.969 Y76.214 E0.02244 ; perimeter
G1 X50.199 Y76.626 E0.01945 ; perimeter
G1 X50.483 Y76.995 E0.01917 ; perimeter
G1 X50.802 Y77.305 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.46750 ; perimeter
G1 X100.102 Y100.203 E0.90676 ; perimeter
G1 X100.100 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.494 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.63635 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03671 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X50.191 Y78.008 E1.48214 ; perimeter
G1 X49.793 Y77.633 E0.02253 ; perimeter
G1 X49.450 Y77.225 E0.02197 ; perimeter
G1 X49.163 Y76.788 E0.02155 ; perimeter
G1 X48.936 Y76.331 E0.02101 ; perimeter
G1 X48.773 Y75.863 E0.02039 ; perimeter
G1 X48.676 Y75.394 E0.01973 ; perimeter
G1 X48.645 Y74.933 E0.01905 ; perimeter
G1 X48.681 Y74.487 E0.01842 ; perimeter
G1 X48.823 Y73.930 E0.02370 ; perimeter
G1 X49.008 Y73.543 E0.01765 ; perimeter
G1 X49.192 Y73.278 E0.01330 ; perimeter
G1 X50.411 Y71.817 E0.07839 ; perimeter
G1 X51.525 Y72.752 E0.05992 ; perimeter
G1 X50.519 Y73.950 E0.06447 ; perimeter
G1 X50.326 Y74.238 E0.01426 ; perimeter
G1 X50.191 Y74.573 E0.01489 ; perimeter
G1 X50.125 Y74.934 E0.01513 ; perimeter
G1 X50.128 Y75.310 E0.01546 ; perimeter
G1 X50.183 Y75.597 E0.01205 ; perimeter
G1 X50.334 Y76.054 E0.01980 ; perimeter
G1 X50.531 Y76.408 E0.01669 ; perimeter
G1 X50.779 Y76.730 E0.01678 ; perimeter
G1 X51.068 Y77.010 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.46098 ; perimeter
G1 X100.500 Y99.806 E0.91721 ; perimeter
G1 X100.495 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.095 Y101.126 F10800.000 ; move inwards before travel
G1 F8640
G1 X97.203 Y101.087 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X84.140 Y101.697 ; move to first infill point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.358 Y100.915 E0.05567 ; infill
G1 X82.673 Y100.915 E0.03448 ; infill
G1 X83.688 Y101.931 E0.07230 ; infill
G1 X83.003 Y101.931 E0.03448 ; infill
G1 X81.988 Y100.915 E0.07230 ; infill
G1 X81.303 Y100.915 E0.03448 ; infill
G1 X82.318 Y101.931 E0.07230 ; infill
G1 X81.634 Y101.931 E0.03448 ; infill
G1 X80.618 Y100.915 E0.07230 ; infill
G1 X80.256 Y100.915 E0.01821 ; infill
G1 X80.256 Y101.238 E0.01627 ; infill
G1 X80.949 Y101.931 E0.04930 ; infill
G1 X80.264 Y101.931 E0.03448 ; infill
G1 X80.055 Y101.722 E0.01483 ; infill
G1 F8640
G1 X80.264 Y101.931 E-0.06804 ; wipe and retract
G1 X80.949 Y101.931 E-0.15815 ; wipe and retract
G1 X80.256 Y101.238 E-0.22612 ; wipe and retract
G1 X80.256 Y100.915 E-0.07462 ; wipe and retract
G1 X80.618 Y100.915 E-0.08353 ; wipe and retract
G1 X81.076 Y101.373 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X56.971 Y70.912 ; move to first perimeter point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X54.377 Y68.735 E0.13948 ; perimeter
G1 X51.928 Y71.654 E0.15696 ; perimeter
G1 X51.421 Y71.228 E0.02729 ; perimeter
G1 X60.418 Y60.505 E0.57663 ; perimeter
G1 X60.926 Y60.931 E0.02729 ; perimeter
G1 X58.477 Y63.850 E0.15696 ; perimeter
G1 X61.070 Y66.026 E0.13948 ; perimeter
G1 X60.726 Y66.436 E0.02205 ; perimeter
G1 X58.133 Y64.260 E0.13948 ; perimeter
G1 X54.722 Y68.325 E0.21861 ; perimeter
G1 X57.315 Y70.501 E0.13948 ; perimeter
G1 X57.010 Y70.866 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X57.020 Y71.470 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X54.426 Y69.294 E0.13948 ; perimeter
G1 X51.977 Y72.212 E0.15696 ; perimeter
G1 X50.863 Y71.277 E0.05995 ; perimeter
G1 X60.369 Y59.947 E0.60929 ; perimeter
G1 X61.484 Y60.882 E0.05995 ; perimeter
G1 X59.035 Y63.801 E0.15696 ; perimeter
G1 X61.629 Y65.977 E0.13948 ; perimeter
G1 X60.775 Y66.995 E0.05471 ; perimeter
G1 X58.181 Y64.818 E0.13948 ; perimeter
G1 X55.280 Y68.276 E0.18596 ; perimeter
G1 X57.874 Y70.453 E0.13948 ; perimeter
G1 X57.058 Y71.424 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.748 Y71.177 F10800.000 ; move inwards before travel
G1 F8640
G1 X54.500 Y69.353 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X98.987 Y81.038 ; move to first perimeter point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.04695 ; perimeter
G1 X97.847 Y76.993 E0.16664 ; perimeter
G1 X98.987 Y76.993 E0.04695 ; perimeter
G1 X98.987 Y80.978 E0.16417 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.15621 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X65.152 Y60.203 E0.89198 ; perimeter
G1 X64.792 Y59.942 E0.01834 ; perimeter
G1 X64.379 Y59.726 E0.01917 ; perimeter
G1 X63.943 Y59.575 E0.01903 ; perimeter
G1 X63.493 Y59.494 E0.01884 ; perimeter
G1 X63.040 Y59.489 E0.01864 ; perimeter
G1 X62.598 Y59.563 E0.01847 ; perimeter
G1 X62.251 Y59.692 E0.01527 ; perimeter
G1 X61.970 Y59.854 E0.01335 ; perimeter
G1 X61.408 Y59.382 E0.03021 ; perimeter
G1 X61.687 Y59.183 E0.01411 ; perimeter
G1 X62.020 Y59.019 E0.01529 ; perimeter
G1 X62.402 Y58.901 E0.01649 ; perimeter
G1 X62.788 Y58.844 E0.01607 ; perimeter
G1 X63.218 Y58.842 E0.01771 ; perimeter
G1 X63.787 Y58.923 E0.02364 ; perimeter
G1 X64.224 Y59.052 E0.01877 ; perimeter
G1 X64.661 Y59.240 E0.01963 ; perimeter
G1 X65.007 Y59.439 E0.01645 ; perimeter
G1 X65.496 Y59.793 E0.02486 ; perimeter
G1 X81.934 Y73.586 E0.88396 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y76.596 E0.17724 ; perimeter
G1 X99.383 Y76.596 E0.07960 ; perimeter
G1 X99.383 Y81.374 E0.19682 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.17848 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X64.908 Y60.516 E0.89734 ; perimeter
G1 X64.583 Y60.280 E0.01657 ; perimeter
G1 X64.222 Y60.091 E0.01678 ; perimeter
G1 X63.843 Y59.960 E0.01654 ; perimeter
G1 X63.455 Y59.890 E0.01621 ; perimeter
G1 X63.071 Y59.886 E0.01584 ; perimeter
G1 X62.700 Y59.948 E0.01546 ; perimeter
G1 X62.420 Y60.052 E0.01234 ; perimeter
G1 X62.052 Y60.264 E0.01748 ; perimeter
G1 X61.954 Y60.358 E0.00559 ; perimeter
G1 X60.822 Y59.408 E0.06089 ; perimeter
G1 X61.137 Y59.089 E0.01848 ; perimeter
G1 X61.483 Y58.842 E0.01750 ; perimeter
G1 X61.873 Y58.650 E0.01792 ; perimeter
G1 X62.307 Y58.516 E0.01868 ; perimeter
G1 X62.761 Y58.448 E0.01893 ; perimeter
G1 X63.245 Y58.445 E0.01996 ; perimeter
G1 X63.871 Y58.535 E0.02604 ; perimeter
G1 X64.358 Y58.678 E0.02093 ; perimeter
G1 X64.839 Y58.885 E0.02156 ; perimeter
G1 X65.223 Y59.106 E0.01824 ; perimeter
G1 X65.740 Y59.480 E0.02629 ; perimeter
G1 X82.078 Y73.189 E0.87860 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y76.200 E0.17724 ; perimeter
G1 X99.780 Y76.200 E0.11226 ; perimeter
G1 X99.780 Y81.770 E0.22948 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.407 Y81.684 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.488 Y81.816 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X97.962 Y79.936 ; move to first infill point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7404.07
G1 X98.671 Y80.644 E0.05063 ; infill
G1 X98.671 Y79.957 E0.03475 ; infill
G1 X98.163 Y79.449 E0.03628 ; infill
G1 X98.163 Y78.761 E0.03475 ; infill
G1 X98.671 Y79.269 E0.03628 ; infill
G1 X98.671 Y78.581 E0.03475 ; infill
G1 X98.163 Y78.074 E0.03628 ; infill
G1 X98.163 Y77.386 E0.03475 ; infill
G1 X98.872 Y78.095 E0.05063 ; infill
G1 F8640
G1 X98.163 Y77.386 E-0.23134 ; wipe and retract
G1 X98.163 Y78.074 E-0.15877 ; wipe and retract
G1 X98.671 Y78.581 E-0.16575 ; wipe and retract
G1 X98.671 Y79.269 E-0.15877 ; wipe and retract
G1 X98.532 Y79.130 E-0.04536 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.162 Y87.014 E0.13052 ; perimeter
G1 X76.506 Y86.604 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.13052 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X83.182 Y78.648 E0.13052 ; perimeter
G1 X83.526 Y78.237 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.13052 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.603 Y87.063 E0.13052 ; perimeter
G1 X76.457 Y86.046 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.13052 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.624 Y78.696 E0.13052 ; perimeter
G1 X83.477 Y77.679 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.13052 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.474 Y78.237 E0.13052 ; perimeter
G1 X166.818 Y78.648 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.13052 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.494 Y86.604 E0.13052 ; perimeter
G1 X173.838 Y87.014 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.13052 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X166.523 Y77.679 E0.13052 ; perimeter
G1 X167.376 Y78.696 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.13052 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X173.543 Y86.046 E0.13052 ; perimeter
G1 X174.397 Y87.063 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.13052 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X151.013 Y81.038 ; move to first perimeter point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y76.993 E0.16664 ; perimeter
G1 X152.153 Y76.993 E0.04695 ; perimeter
G1 X152.153 Y81.038 E0.16664 ; perimeter
G1 X151.073 Y81.038 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.617 Y76.596 E0.19929 ; perimeter
G1 X152.549 Y76.596 E0.07960 ; perimeter
G1 X152.549 Y80.899 E0.17724 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X184.504 Y59.793 E0.88396 ; perimeter
G1 X184.993 Y59.439 E0.02486 ; perimeter
G1 X185.339 Y59.240 E0.01645 ; perimeter
G1 X185.776 Y59.052 E0.01963 ; perimeter
G1 X186.219 Y58.922 E0.01900 ; perimeter
G1 X186.652 Y58.851 E0.01806 ; perimeter
G1 X187.212 Y58.845 E0.02307 ; perimeter
G1 X187.614 Y58.906 E0.01676 ; perimeter
G1 X187.971 Y59.015 E0.01539 ; perimeter
G1 X188.313 Y59.183 E0.01570 ; perimeter
G1 X188.592 Y59.382 E0.01411 ; perimeter
G1 X188.033 Y59.851 E0.03004 ; perimeter
G1 X187.819 Y59.718 E0.01039 ; perimeter
G1 X187.402 Y59.563 E0.01834 ; perimeter
G1 X186.960 Y59.489 E0.01847 ; perimeter
G1 X186.507 Y59.494 E0.01864 ; perimeter
G1 X186.057 Y59.575 E0.01884 ; perimeter
G1 X185.621 Y59.726 E0.01903 ; perimeter
G1 X185.212 Y59.940 E0.01901 ; perimeter
G1 X184.937 Y60.134 E0.01386 ; perimeter
G1 X168.261 Y74.121 E0.89661 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X150.677 Y81.434 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X150.220 Y76.200 E0.23195 ; perimeter
G1 X152.945 Y76.200 E0.11226 ; perimeter
G1 X152.945 Y80.502 E0.17724 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X184.260 Y59.480 E0.87860 ; perimeter
G1 X184.777 Y59.106 E0.02629 ; perimeter
G1 X185.161 Y58.885 E0.01824 ; perimeter
G1 X185.642 Y58.678 E0.02156 ; perimeter
G1 X186.131 Y58.534 E0.02101 ; perimeter
G1 X186.617 Y58.455 E0.02031 ; perimeter
G1 X187.239 Y58.449 E0.02561 ; perimeter
G1 X187.699 Y58.518 E0.01918 ; perimeter
G1 X187.996 Y58.604 E0.01273 ; perimeter
G1 X188.124 Y58.648 E0.00556 ; perimeter
G1 X188.517 Y58.842 E0.01807 ; perimeter
G1 X188.863 Y59.089 E0.01750 ; perimeter
G1 X189.178 Y59.408 E0.01848 ; perimeter
G1 X188.046 Y60.358 E0.06089 ; perimeter
G1 X187.951 Y60.266 E0.00544 ; perimeter
G1 X187.644 Y60.075 E0.01489 ; perimeter
G1 X187.300 Y59.948 E0.01513 ; perimeter
G1 X186.929 Y59.886 E0.01546 ; perimeter
G1 X186.545 Y59.890 E0.01584 ; perimeter
G1 X186.157 Y59.960 E0.01621 ; perimeter
G1 X185.778 Y60.091 E0.01654 ; perimeter
G1 X185.419 Y60.279 E0.01672 ; perimeter
G1 X185.179 Y60.448 E0.01210 ; perimeter
G1 X168.405 Y74.517 E0.90187 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X150.280 Y81.830 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.359 Y81.455 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.245 Y78.539 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X151.128 Y79.936 ; move to first infill point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7404.07
G1 X151.837 Y80.644 E0.05063 ; infill
G1 X151.837 Y79.957 E0.03475 ; infill
G1 X151.329 Y79.449 E0.03628 ; infill
G1 X151.329 Y78.761 E0.03475 ; infill
G1 X151.837 Y79.269 E0.03628 ; infill
G1 X151.837 Y78.581 E0.03475 ; infill
G1 X151.329 Y78.074 E0.03628 ; infill
G1 X151.329 Y77.386 E0.03475 ; infill
G1 X152.038 Y78.095 E0.05063 ; infill
G1 F8640
G1 X151.329 Y77.386 E-0.23134 ; wipe and retract
G1 X151.329 Y78.074 E-0.15877 ; wipe and retract
G1 X151.837 Y78.581 E-0.16575 ; wipe and retract
G1 X151.837 Y79.269 E-0.15877 ; wipe and retract
G1 X151.698 Y79.130 E-0.04536 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X193.029 Y70.912 ; move to first perimeter point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X192.685 Y70.501 E0.02205 ; perimeter
G1 X195.278 Y68.325 E0.13948 ; perimeter
M73 Q65 S48
G1 X191.867 Y64.260 E0.21861 ; perimeter
G1 X189.274 Y66.436 E0.13948 ; perimeter
G1 X188.930 Y66.026 E0.02205 ; perimeter
G1 X191.523 Y63.850 E0.13948 ; perimeter
G1 X189.074 Y60.931 E0.15696 ; perimeter
G1 X189.582 Y60.505 E0.02730 ; perimeter
G1 X198.579 Y71.228 E0.57663 ; perimeter
G1 X198.072 Y71.654 E0.02729 ; perimeter
G1 X195.623 Y68.735 E0.15696 ; perimeter
G1 X193.075 Y70.873 E0.13700 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.980 Y71.470 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X192.126 Y70.453 E0.05471 ; perimeter
G1 X194.720 Y68.276 E0.13948 ; perimeter
G1 X191.818 Y64.818 E0.18596 ; perimeter
G1 X189.225 Y66.995 E0.13948 ; perimeter
G1 X188.371 Y65.977 E0.05471 ; perimeter
G1 X190.965 Y63.801 E0.13948 ; perimeter
G1 X188.516 Y60.882 E0.15696 ; perimeter
G1 X189.631 Y59.947 E0.05995 ; perimeter
G1 X199.137 Y71.277 E0.60929 ; perimeter
G1 X198.023 Y72.212 E0.05995 ; perimeter
G1 X195.574 Y69.294 E0.15696 ; perimeter
G1 X193.026 Y71.431 E0.13700 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.023 Y71.072 F10800.000 ; move inwards before travel
G1 F8640
G1 X192.126 Y70.453 E-0.30695 ; wipe and retract
G1 X193.629 Y69.191 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X149.900 Y100.738 ; move to first perimeter point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X149.898 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E0.90676 ; perimeter
G1 X199.198 Y77.305 E1.46750 ; perimeter
G1 X199.517 Y76.995 E0.01834 ; perimeter
G1 X199.801 Y76.626 E0.01918 ; perimeter
G1 X200.026 Y76.223 E0.01903 ; perimeter
G1 X200.184 Y75.793 E0.01884 ; perimeter
G1 X200.268 Y75.349 E0.01864 ; perimeter
G1 X200.272 Y74.900 E0.01847 ; perimeter
G1 X200.192 Y74.462 E0.01834 ; perimeter
G1 X200.028 Y74.055 E0.01808 ; perimeter
G1 X199.843 Y73.772 E0.01394 ; perimeter
G1 X199.033 Y72.801 E0.05209 ; perimeter
G1 X199.541 Y72.375 E0.02735 ; perimeter
G1 X200.431 Y73.435 E0.05703 ; perimeter
G1 X200.652 Y73.749 E0.01580 ; perimeter
G1 X200.803 Y74.067 E0.01452 ; perimeter
G1 X200.907 Y74.426 E0.01539 ; perimeter
G1 X200.957 Y74.823 E0.01649 ; perimeter
G1 X200.946 Y75.213 E0.01608 ; perimeter
G1 X200.874 Y75.637 E0.01771 ; perimeter
G1 X200.695 Y76.182 E0.02364 ; perimeter
G1 X200.492 Y76.591 E0.01883 ; perimeter
G1 X200.289 Y76.904 E0.01535 ; perimeter
G1 X199.915 Y77.364 E0.02443 ; perimeter
G1 X199.545 Y77.712 E0.02091 ; perimeter
G1 X172.104 Y100.738 E1.47572 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X149.960 Y100.738 E0.63395 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.506 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.500 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E0.91721 ; perimeter
G1 X198.932 Y77.010 E1.46098 ; perimeter
G1 X199.221 Y76.730 E0.01657 ; perimeter
G1 X199.469 Y76.408 E0.01678 ; perimeter
G1 X199.665 Y76.057 E0.01654 ; perimeter
G1 X199.800 Y75.688 E0.01621 ; perimeter
G1 X199.872 Y75.310 E0.01584 ; perimeter
G1 X199.875 Y74.934 E0.01546 ; perimeter
G1 X199.809 Y74.573 E0.01513 ; perimeter
G1 X199.675 Y74.239 E0.01482 ; perimeter
G1 X199.524 Y74.008 E0.01137 ; perimeter
G1 X198.475 Y72.752 E0.06742 ; perimeter
G1 X199.590 Y71.816 E0.05997 ; perimeter
G1 X200.745 Y73.193 E0.07405 ; perimeter
G1 X200.993 Y73.545 E0.01775 ; perimeter
G1 X201.175 Y73.927 E0.01741 ; perimeter
G1 X201.297 Y74.345 E0.01795 ; perimeter
G1 X201.353 Y74.795 E0.01868 ; perimeter
G1 X201.341 Y75.254 E0.01893 ; perimeter
G1 X201.260 Y75.732 E0.01996 ; perimeter
G1 X201.063 Y76.333 E0.02604 ; perimeter
G1 X200.837 Y76.788 E0.02095 ; perimeter
G1 X200.610 Y77.138 E0.01717 ; perimeter
G1 X200.205 Y77.634 E0.02638 ; perimeter
G1 X199.809 Y78.008 E0.02245 ; perimeter
G1 X172.248 Y101.134 E1.48213 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X149.566 Y101.134 E0.63388 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.714 Y100.793 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.500 Y99.806 E-0.30701 ; wipe and retract
G1 X151.462 Y99.806 E-0.45299 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X165.860 Y101.722 ; move to first infill point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.069 Y101.931 E0.01484 ; infill
G1 X166.754 Y101.931 E0.03448 ; infill
G1 X166.061 Y101.238 E0.04930 ; infill
G1 X166.061 Y100.915 E0.01627 ; infill
G1 X166.423 Y100.915 E0.01821 ; infill
G1 X167.439 Y101.931 E0.07230 ; infill
G1 X168.124 Y101.931 E0.03448 ; infill
G1 X167.108 Y100.915 E0.07230 ; infill
G1 X167.793 Y100.915 E0.03448 ; infill
G1 X168.808 Y101.931 E0.07230 ; infill
G1 X169.493 Y101.931 E0.03448 ; infill
G1 X168.478 Y100.915 E0.07230 ; infill
G1 X169.163 Y100.915 E0.03448 ; infill
G1 X169.945 Y101.697 E0.05567 ; infill
G1 F8640
G1 X169.163 Y100.915 E-0.25535 ; wipe and retract
G1 X168.478 Y100.915 E-0.15815 ; wipe and retract
G1 X169.493 Y101.931 E-0.33164 ; wipe and retract
G1 X169.429 Y101.931 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X99.815 Y138.884 ; move to first perimeter point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.63642 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X50.170 Y115.858 E1.47572 ; perimeter
G1 X49.797 Y115.507 E0.02111 ; perimeter
G1 X49.483 Y115.134 E0.02006 ; perimeter
G1 X49.222 Y114.736 E0.01960 ; perimeter
G1 X49.017 Y114.323 E0.01900 ; perimeter
G1 X48.871 Y113.904 E0.01830 ; perimeter
G1 X48.785 Y113.487 E0.01752 ; perimeter
G1 X48.758 Y113.082 E0.01673 ; perimeter
G1 X48.789 Y112.695 E0.01597 ; perimeter
G1 X48.908 Y112.222 E0.02012 ; perimeter
G1 X49.067 Y111.889 E0.01519 ; perimeter
G1 X49.222 Y111.664 E0.01126 ; perimeter
G1 X50.175 Y110.522 E0.06128 ; perimeter
G1 X50.681 Y110.947 E0.02722 ; perimeter
G1 X49.916 Y111.858 E0.04901 ; perimeter
G1 X49.688 Y112.197 E0.01685 ; perimeter
G1 X49.523 Y112.609 E0.01826 ; perimeter
G1 X49.443 Y113.047 E0.01834 ; perimeter
G1 X49.447 Y113.495 E0.01847 ; perimeter
G1 X49.513 Y113.843 E0.01459 ; perimeter
G1 X49.684 Y114.360 E0.02244 ; perimeter
G1 X49.913 Y114.773 E0.01945 ; perimeter
G1 X50.198 Y115.141 E0.01917 ; perimeter
G1 X50.517 Y115.451 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.46750 ; perimeter
G1 X99.817 Y138.349 E0.90676 ; perimeter
G1 X99.815 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.209 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.63635 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03671 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X49.906 Y116.154 E1.48214 ; perimeter
G1 X49.508 Y115.779 E0.02253 ; perimeter
G1 X49.165 Y115.371 E0.02197 ; perimeter
G1 X48.878 Y114.934 E0.02155 ; perimeter
G1 X48.651 Y114.477 E0.02101 ; perimeter
G1 X48.488 Y114.010 E0.02039 ; perimeter
G1 X48.391 Y113.541 E0.01973 ; perimeter
G1 X48.360 Y113.079 E0.01905 ; perimeter
G1 X48.396 Y112.633 E0.01842 ; perimeter
G1 X48.538 Y112.076 E0.02370 ; perimeter
G1 X48.723 Y111.689 E0.01765 ; perimeter
G1 X48.907 Y111.424 E0.01330 ; perimeter
G1 X50.125 Y109.963 E0.07839 ; perimeter
G1 X51.240 Y110.898 E0.05992 ; perimeter
G1 X50.234 Y112.097 E0.06447 ; perimeter
G1 X50.041 Y112.384 E0.01426 ; perimeter
G1 X49.906 Y112.719 E0.01489 ; perimeter
G1 X49.840 Y113.081 E0.01513 ; perimeter
G1 X49.843 Y113.456 E0.01546 ; perimeter
G1 X49.897 Y113.744 E0.01205 ; perimeter
G1 X50.048 Y114.200 E0.01980 ; perimeter
G1 X50.245 Y114.554 E0.01669 ; perimeter
G1 X50.494 Y114.877 E0.01678 ; perimeter
G1 X50.783 Y115.156 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.46098 ; perimeter
G1 X100.215 Y137.952 E0.91721 ; perimeter
G1 X100.210 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.809 Y139.272 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.918 Y139.233 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X83.854 Y139.843 ; move to first infill point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.072 Y139.061 E0.05567 ; infill
G1 X82.388 Y139.061 E0.03448 ; infill
G1 X83.403 Y140.077 E0.07230 ; infill
G1 X82.718 Y140.077 E0.03448 ; infill
G1 X81.703 Y139.061 E0.07230 ; infill
G1 X81.018 Y139.061 E0.03448 ; infill
G1 X82.033 Y140.077 E0.07230 ; infill
G1 X81.348 Y140.077 E0.03448 ; infill
G1 X80.333 Y139.061 E0.07230 ; infill
G1 X79.971 Y139.061 E0.01821 ; infill
G1 X79.971 Y139.384 E0.01627 ; infill
G1 X80.663 Y140.077 E0.04930 ; infill
G1 X79.978 Y140.077 E0.03448 ; infill
G1 X79.770 Y139.868 E0.01483 ; infill
G1 F8640
G1 X79.978 Y140.077 E-0.06804 ; wipe and retract
G1 X80.663 Y140.077 E-0.15815 ; wipe and retract
G1 X79.971 Y139.384 E-0.22612 ; wipe and retract
G1 X79.971 Y139.061 E-0.07462 ; wipe and retract
G1 X80.333 Y139.061 E-0.08353 ; wipe and retract
G1 X80.791 Y139.519 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X56.686 Y109.058 ; move to first perimeter point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X54.092 Y106.881 E0.13948 ; perimeter
G1 X51.643 Y109.800 E0.15696 ; perimeter
G1 X51.136 Y109.374 E0.02729 ; perimeter
G1 X60.133 Y98.652 E0.57663 ; perimeter
G1 X60.641 Y99.077 E0.02729 ; perimeter
G1 X58.192 Y101.996 E0.15696 ; perimeter
G1 X60.785 Y104.172 E0.13948 ; perimeter
G1 X60.441 Y104.582 E0.02205 ; perimeter
G1 X57.847 Y102.406 E0.13948 ; perimeter
G1 X54.436 Y106.471 E0.21861 ; perimeter
G1 X57.030 Y108.648 E0.13948 ; perimeter
G1 X56.724 Y109.012 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.735 Y109.616 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X54.141 Y107.440 E0.13948 ; perimeter
G1 X51.692 Y110.358 E0.15696 ; perimeter
G1 X50.577 Y109.423 E0.05995 ; perimeter
G1 X60.084 Y98.093 E0.60929 ; perimeter
G1 X61.199 Y99.029 E0.05995 ; perimeter
G1 X58.750 Y101.947 E0.15696 ; perimeter
G1 X61.344 Y104.124 E0.13948 ; perimeter
G1 X60.490 Y105.141 E0.05471 ; perimeter
G1 X57.896 Y102.965 E0.13948 ; perimeter
G1 X54.995 Y106.422 E0.18596 ; perimeter
M73 P65 R46
G1 X57.588 Y108.599 E0.13948 ; perimeter
G1 X56.773 Y109.570 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.463 Y109.323 F10800.000 ; move inwards before travel
G1 F8640
G1 X54.215 Y107.499 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X98.702 Y119.184 ; move to first perimeter point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.04695 ; perimeter
G1 X97.562 Y115.139 E0.16664 ; perimeter
G1 X98.702 Y115.139 E0.04695 ; perimeter
G1 X98.702 Y119.124 E0.16417 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.15621 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X64.867 Y98.349 E0.89198 ; perimeter
G1 X64.507 Y98.088 E0.01834 ; perimeter
G1 X64.094 Y97.872 E0.01917 ; perimeter
G1 X63.658 Y97.721 E0.01903 ; perimeter
G1 X63.208 Y97.641 E0.01884 ; perimeter
G1 X62.755 Y97.635 E0.01864 ; perimeter
G1 X62.313 Y97.709 E0.01847 ; perimeter
G1 X61.965 Y97.838 E0.01527 ; perimeter
G1 X61.685 Y98.000 E0.01335 ; perimeter
G1 X61.123 Y97.528 E0.03021 ; perimeter
G1 X61.402 Y97.329 E0.01411 ; perimeter
G1 X61.735 Y97.165 E0.01529 ; perimeter
G1 X62.117 Y97.047 E0.01649 ; perimeter
G1 X62.503 Y96.991 E0.01607 ; perimeter
G1 X62.933 Y96.988 E0.01771 ; perimeter
G1 X63.501 Y97.069 E0.02364 ; perimeter
G1 X63.938 Y97.198 E0.01877 ; perimeter
G1 X64.376 Y97.386 E0.01963 ; perimeter
G1 X64.722 Y97.586 E0.01645 ; perimeter
G1 X65.211 Y97.939 E0.02486 ; perimeter
G1 X81.649 Y111.732 E0.88396 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y114.742 E0.17724 ; perimeter
G1 X99.098 Y114.742 E0.07960 ; perimeter
G1 X99.098 Y119.520 E0.19682 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.17848 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X64.623 Y98.662 E0.89734 ; perimeter
G1 X64.297 Y98.426 E0.01657 ; perimeter
G1 X63.937 Y98.237 E0.01678 ; perimeter
G1 X63.557 Y98.106 E0.01654 ; perimeter
G1 X63.170 Y98.037 E0.01621 ; perimeter
G1 X62.786 Y98.032 E0.01584 ; perimeter
G1 X62.415 Y98.094 E0.01546 ; perimeter
G1 X62.134 Y98.198 E0.01234 ; perimeter
G1 X61.767 Y98.410 E0.01748 ; perimeter
G1 X61.669 Y98.504 E0.00559 ; perimeter
G1 X60.537 Y97.554 E0.06089 ; perimeter
G1 X60.852 Y97.235 E0.01848 ; perimeter
G1 X61.198 Y96.988 E0.01750 ; perimeter
G1 X61.588 Y96.796 E0.01792 ; perimeter
G1 X62.021 Y96.662 E0.01868 ; perimeter
G1 X62.476 Y96.594 E0.01893 ; perimeter
G1 X62.960 Y96.591 E0.01996 ; perimeter
G1 X63.586 Y96.681 E0.02604 ; perimeter
G1 X64.073 Y96.824 E0.02093 ; perimeter
G1 X64.554 Y97.031 E0.02156 ; perimeter
G1 X64.938 Y97.252 E0.01824 ; perimeter
G1 X65.455 Y97.626 E0.02629 ; perimeter
G1 X81.793 Y111.335 E0.87860 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y114.346 E0.17724 ; perimeter
G1 X99.494 Y114.346 E0.11226 ; perimeter
G1 X99.494 Y119.916 E0.22948 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.122 Y119.831 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.203 Y119.962 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X97.677 Y118.082 ; move to first infill point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7404.07
G1 X98.386 Y118.790 E0.05063 ; infill
G1 X98.386 Y118.103 E0.03475 ; infill
G1 X97.878 Y117.595 E0.03628 ; infill
G1 X97.878 Y116.907 E0.03475 ; infill
G1 X98.386 Y117.415 E0.03628 ; infill
G1 X98.386 Y116.727 E0.03475 ; infill
G1 X97.878 Y116.220 E0.03628 ; infill
G1 X97.878 Y115.532 E0.03475 ; infill
G1 X98.587 Y116.241 E0.05063 ; infill
G1 F8640
G1 X97.878 Y115.532 E-0.23134 ; wipe and retract
G1 X97.878 Y116.220 E-0.15877 ; wipe and retract
G1 X98.386 Y116.727 E-0.16575 ; wipe and retract
G1 X98.386 Y117.415 E-0.15877 ; wipe and retract
G1 X98.247 Y117.276 E-0.04536 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.876 Y125.160 E0.13052 ; perimeter
G1 X76.220 Y124.750 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.13052 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.897 Y116.794 E0.13052 ; perimeter
G1 X83.241 Y116.384 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.13052 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.318 Y125.209 E0.13052 ; perimeter
G1 X76.172 Y124.192 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.13052 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X82.339 Y116.843 E0.13052 ; perimeter
G1 X83.192 Y115.825 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.13052 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.189 Y116.384 E0.13052 ; perimeter
G1 X166.533 Y116.794 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.13052 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.209 Y124.750 E0.13052 ; perimeter
G1 X173.553 Y125.160 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.13052 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.237 Y115.825 E0.13052 ; perimeter
G1 X167.091 Y116.843 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.13052 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.258 Y124.192 E0.13052 ; perimeter
G1 X174.112 Y125.209 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.13052 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X150.728 Y119.184 ; move to first perimeter point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y115.139 E0.16664 ; perimeter
G1 X151.868 Y115.139 E0.04695 ; perimeter
G1 X151.868 Y119.184 E0.16664 ; perimeter
G1 X150.788 Y119.184 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.332 Y114.742 E0.19929 ; perimeter
G1 X152.264 Y114.742 E0.07960 ; perimeter
G1 X152.264 Y119.045 E0.17724 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X184.218 Y97.939 E0.88396 ; perimeter
G1 X184.707 Y97.586 E0.02486 ; perimeter
G1 X185.054 Y97.386 E0.01645 ; perimeter
G1 X185.491 Y97.198 E0.01963 ; perimeter
G1 X185.934 Y97.068 E0.01900 ; perimeter
G1 X186.366 Y96.997 E0.01806 ; perimeter
G1 X186.926 Y96.991 E0.02307 ; perimeter
G1 X187.329 Y97.052 E0.01676 ; perimeter
G1 X187.686 Y97.161 E0.01539 ; perimeter
G1 X188.028 Y97.329 E0.01570 ; perimeter
G1 X188.307 Y97.528 E0.01411 ; perimeter
G1 X187.748 Y97.997 E0.03004 ; perimeter
G1 X187.534 Y97.864 E0.01039 ; perimeter
G1 X187.117 Y97.709 E0.01834 ; perimeter
G1 X186.675 Y97.635 E0.01847 ; perimeter
G1 X186.222 Y97.641 E0.01864 ; perimeter
G1 X185.772 Y97.721 E0.01884 ; perimeter
G1 X185.335 Y97.872 E0.01903 ; perimeter
G1 X184.927 Y98.086 E0.01901 ; perimeter
G1 X184.651 Y98.280 E0.01386 ; perimeter
G1 X167.976 Y112.267 E0.89661 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X150.392 Y119.580 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.935 Y114.346 E0.23195 ; perimeter
G1 X152.660 Y114.346 E0.11226 ; perimeter
G1 X152.660 Y118.648 E0.17724 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X183.975 Y97.626 E0.87860 ; perimeter
G1 X184.492 Y97.252 E0.02629 ; perimeter
G1 X184.876 Y97.031 E0.01824 ; perimeter
G1 X185.356 Y96.824 E0.02156 ; perimeter
G1 X185.846 Y96.680 E0.02101 ; perimeter
G1 X186.332 Y96.601 E0.02031 ; perimeter
G1 X186.954 Y96.595 E0.02561 ; perimeter
G1 X187.414 Y96.664 E0.01918 ; perimeter
G1 X187.711 Y96.751 E0.01273 ; perimeter
G1 X187.838 Y96.794 E0.00556 ; perimeter
G1 X188.232 Y96.988 E0.01807 ; perimeter
G1 X188.578 Y97.235 E0.01750 ; perimeter
G1 X188.893 Y97.554 E0.01848 ; perimeter
G1 X187.761 Y98.504 E0.06089 ; perimeter
G1 X187.666 Y98.412 E0.00544 ; perimeter
G1 X187.359 Y98.222 E0.01489 ; perimeter
G1 X187.014 Y98.094 E0.01513 ; perimeter
G1 X186.644 Y98.032 E0.01546 ; perimeter
G1 X186.260 Y98.037 E0.01584 ; perimeter
G1 X185.872 Y98.106 E0.01621 ; perimeter
G1 X185.493 Y98.237 E0.01654 ; perimeter
G1 X185.133 Y98.425 E0.01672 ; perimeter
G1 X184.893 Y98.595 E0.01210 ; perimeter
G1 X168.120 Y112.663 E0.90187 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X149.995 Y119.976 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.074 Y119.601 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.960 Y116.685 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X150.843 Y118.082 ; move to first infill point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7404.07
G1 X151.552 Y118.790 E0.05063 ; infill
G1 X151.552 Y118.103 E0.03475 ; infill
G1 X151.044 Y117.595 E0.03628 ; infill
G1 X151.044 Y116.907 E0.03475 ; infill
G1 X151.552 Y117.415 E0.03628 ; infill
G1 X151.552 Y116.727 E0.03475 ; infill
G1 X151.044 Y116.220 E0.03628 ; infill
G1 X151.044 Y115.532 E0.03475 ; infill
G1 X151.752 Y116.241 E0.05063 ; infill
G1 F8640
G1 X151.044 Y115.532 E-0.23134 ; wipe and retract
G1 X151.044 Y116.220 E-0.15877 ; wipe and retract
G1 X151.552 Y116.727 E-0.16575 ; wipe and retract
G1 X151.552 Y117.415 E-0.15877 ; wipe and retract
G1 X151.413 Y117.276 E-0.04536 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X192.744 Y109.058 ; move to first perimeter point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X192.400 Y108.648 E0.02205 ; perimeter
G1 X194.993 Y106.471 E0.13948 ; perimeter
G1 X191.582 Y102.406 E0.21861 ; perimeter
G1 X188.989 Y104.582 E0.13948 ; perimeter
G1 X188.644 Y104.172 E0.02205 ; perimeter
G1 X191.238 Y101.996 E0.13948 ; perimeter
G1 X188.789 Y99.077 E0.15696 ; perimeter
G1 X189.297 Y98.652 E0.02730 ; perimeter
G1 X198.294 Y109.374 E0.57663 ; perimeter
G1 X197.786 Y109.800 E0.02729 ; perimeter
G1 X195.337 Y106.881 E0.15696 ; perimeter
G1 X192.790 Y109.019 E0.13700 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.695 Y109.616 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X191.841 Y108.599 E0.05471 ; perimeter
G1 X194.435 Y106.422 E0.13948 ; perimeter
G1 X191.533 Y102.965 E0.18596 ; perimeter
G1 X188.940 Y105.141 E0.13948 ; perimeter
G1 X188.086 Y104.124 E0.05471 ; perimeter
G1 X190.680 Y101.947 E0.13948 ; perimeter
G1 X188.231 Y99.029 E0.15696 ; perimeter
G1 X189.345 Y98.093 E0.05995 ; perimeter
G1 X198.852 Y109.423 E0.60929 ; perimeter
G1 X197.738 Y110.358 E0.05995 ; perimeter
G1 X195.288 Y107.440 E0.15696 ; perimeter
G1 X192.741 Y109.578 E0.13700 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.738 Y109.218 F10800.000 ; move inwards before travel
G1 F8640
G1 X191.841 Y108.599 E-0.30695 ; wipe and retract
G1 X193.344 Y107.338 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X149.615 Y138.884 ; move to first perimeter point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X149.613 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E0.90676 ; perimeter
G1 X198.912 Y115.451 E1.46750 ; perimeter
G1 X199.232 Y115.141 E0.01834 ; perimeter
G1 X199.516 Y114.773 E0.01918 ; perimeter
G1 X199.741 Y114.369 E0.01903 ; perimeter
G1 X199.899 Y113.940 E0.01884 ; perimeter
G1 X199.982 Y113.495 E0.01864 ; perimeter
G1 X199.986 Y113.047 E0.01847 ; perimeter
G1 X199.906 Y112.609 E0.01834 ; perimeter
G1 X199.743 Y112.201 E0.01808 ; perimeter
G1 X199.558 Y111.918 E0.01394 ; perimeter
G1 X198.747 Y110.947 E0.05209 ; perimeter
G1 X199.256 Y110.521 E0.02735 ; perimeter
G1 X200.146 Y111.581 E0.05703 ; perimeter
G1 X200.367 Y111.895 E0.01580 ; perimeter
G1 X200.518 Y112.213 E0.01452 ; perimeter
G1 X200.622 Y112.572 E0.01539 ; perimeter
G1 X200.672 Y112.969 E0.01649 ; perimeter
G1 X200.661 Y113.359 E0.01608 ; perimeter
G1 X200.589 Y113.783 E0.01771 ; perimeter
G1 X200.410 Y114.328 E0.02364 ; perimeter
G1 X200.207 Y114.738 E0.01883 ; perimeter
G1 X200.004 Y115.050 E0.01535 ; perimeter
G1 X199.629 Y115.510 E0.02443 ; perimeter
G1 X199.260 Y115.858 E0.02091 ; perimeter
G1 X171.819 Y138.884 E1.47572 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X149.675 Y138.884 E0.63395 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.220 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.215 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E0.91721 ; perimeter
G1 X198.647 Y115.156 E1.46098 ; perimeter
G1 X198.936 Y114.877 E0.01657 ; perimeter
G1 X199.184 Y114.554 E0.01678 ; perimeter
G1 X199.379 Y114.203 E0.01654 ; perimeter
G1 X199.515 Y113.834 E0.01621 ; perimeter
G1 X199.586 Y113.456 E0.01584 ; perimeter
G1 X199.590 Y113.081 E0.01546 ; perimeter
G1 X199.524 Y112.719 E0.01513 ; perimeter
G1 X199.390 Y112.385 E0.01482 ; perimeter
G1 X199.239 Y112.154 E0.01137 ; perimeter
G1 X198.190 Y110.898 E0.06742 ; perimeter
G1 X199.305 Y109.962 E0.05997 ; perimeter
G1 X200.460 Y111.339 E0.07405 ; perimeter
G1 X200.708 Y111.691 E0.01775 ; perimeter
G1 X200.890 Y112.073 E0.01741 ; perimeter
G1 X201.012 Y112.491 E0.01795 ; perimeter
G1 X201.068 Y112.941 E0.01868 ; perimeter
G1 X201.056 Y113.401 E0.01893 ; perimeter
G1 X200.975 Y113.878 E0.01996 ; perimeter
G1 X200.778 Y114.479 E0.02604 ; perimeter
G1 X200.552 Y114.934 E0.02095 ; perimeter
G1 X200.325 Y115.284 E0.01717 ; perimeter
G1 X199.920 Y115.780 E0.02638 ; perimeter
G1 X199.524 Y116.154 E0.02245 ; perimeter
G1 X171.963 Y139.280 E1.48213 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X149.280 Y139.280 E0.63388 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.429 Y138.939 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.215 Y137.952 E-0.30701 ; wipe and retract
G1 X151.177 Y137.952 E-0.45299 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
G1 X165.575 Y139.868 ; move to first infill point
G1 Z14.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.784 Y140.077 E0.01484 ; infill
G1 X166.469 Y140.077 E0.03448 ; infill
G1 X165.776 Y139.384 E0.04930 ; infill
G1 X165.776 Y139.061 E0.01627 ; infill
G1 X166.138 Y139.061 E0.01821 ; infill
G1 X167.153 Y140.077 E0.07230 ; infill
G1 X167.838 Y140.077 E0.03448 ; infill
G1 X166.823 Y139.061 E0.07230 ; infill
G1 X167.508 Y139.061 E0.03448 ; infill
G1 X168.523 Y140.077 E0.07230 ; infill
G1 X169.208 Y140.077 E0.03448 ; infill
G1 X168.193 Y139.061 E0.07230 ; infill
G1 X168.878 Y139.061 E0.03448 ; infill
G1 X169.660 Y139.843 E0.05567 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;14.5


G1 F8640
G1 X168.878 Y139.061 E-0.25535 ; wipe and retract
G1 X168.193 Y139.061 E-0.15815 ; wipe and retract
G1 X169.208 Y140.077 E-0.33164 ; wipe and retract
G1 X169.144 Y140.077 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z14.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;14.5
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X99.795 Y100.738 ; move to first perimeter point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.62388 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X50.321 Y77.599 E1.48293 ; perimeter
G1 X49.949 Y77.249 E0.02105 ; perimeter
G1 X49.636 Y76.877 E0.02001 ; perimeter
G1 X49.375 Y76.481 E0.01955 ; perimeter
G1 X49.170 Y76.069 E0.01895 ; perimeter
G1 X49.024 Y75.651 E0.01826 ; perimeter
G1 X48.937 Y75.235 E0.01749 ; perimeter
G1 X48.909 Y74.831 E0.01670 ; perimeter
G1 X48.939 Y74.445 E0.01595 ; perimeter
G1 X49.060 Y73.961 E0.02056 ; perimeter
G1 X49.218 Y73.630 E0.01513 ; perimeter
G1 X49.376 Y73.402 E0.01143 ; perimeter
G1 X50.326 Y72.263 E0.06108 ; perimeter
G1 X50.832 Y72.688 E0.02722 ; perimeter
G1 X50.068 Y73.599 E0.04901 ; perimeter
G1 X49.839 Y73.939 E0.01685 ; perimeter
G1 X49.674 Y74.350 E0.01826 ; perimeter
G1 X49.594 Y74.788 E0.01834 ; perimeter
G1 X49.598 Y75.236 E0.01847 ; perimeter
G1 X49.682 Y75.681 E0.01864 ; perimeter
G1 X49.840 Y76.110 E0.01884 ; perimeter
G1 X50.064 Y76.514 E0.01903 ; perimeter
G1 X50.349 Y76.883 E0.01917 ; perimeter
G1 X50.668 Y77.192 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.47472 ; perimeter
G1 X99.795 Y100.203 E0.89412 ; perimeter
G1 X99.795 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X100.192 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.62388 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03671 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
M73 Q66 S47
G1 X50.057 Y77.896 E1.48935 ; perimeter
G1 X49.660 Y77.522 E0.02246 ; perimeter
G1 X49.318 Y77.115 E0.02191 ; perimeter
G1 X49.031 Y76.679 E0.02149 ; perimeter
G1 X48.804 Y76.223 E0.02096 ; perimeter
G1 X48.641 Y75.757 E0.02035 ; perimeter
G1 X48.543 Y75.290 E0.01968 ; perimeter
G1 X48.511 Y74.829 E0.01901 ; perimeter
G1 X48.546 Y74.384 E0.01838 ; perimeter
G1 X48.690 Y73.815 E0.02420 ; perimeter
G1 X48.874 Y73.430 E0.01759 ; perimeter
G1 X49.061 Y73.161 E0.01347 ; perimeter
G1 X50.276 Y71.704 E0.07818 ; perimeter
G1 X51.391 Y72.639 E0.05992 ; perimeter
G1 X50.385 Y73.838 E0.06447 ; perimeter
G1 X50.192 Y74.125 E0.01426 ; perimeter
G1 X50.057 Y74.461 E0.01489 ; perimeter
G1 X49.991 Y74.822 E0.01513 ; perimeter
G1 X49.994 Y75.197 E0.01546 ; perimeter
G1 X50.066 Y75.575 E0.01584 ; perimeter
G1 X50.201 Y75.945 E0.01621 ; perimeter
G1 X50.396 Y76.295 E0.01654 ; perimeter
G1 X50.645 Y76.618 E0.01678 ; perimeter
G1 X50.934 Y76.898 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.46819 ; perimeter
G1 X100.191 Y99.806 E0.90450 ; perimeter
G1 X100.192 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.792 Y101.126 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.900 Y101.087 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X83.730 Y102.131 ; move to first infill point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.939 Y101.923 E0.01484 ; infill
G1 X83.939 Y101.238 E0.03448 ; infill
G1 X83.246 Y101.931 E0.04931 ; infill
G1 X82.561 Y101.931 E0.03448 ; infill
G1 X83.577 Y100.915 E0.07230 ; infill
G1 X82.892 Y100.915 E0.03448 ; infill
G1 X81.876 Y101.931 E0.07230 ; infill
G1 X81.191 Y101.931 E0.03448 ; infill
G1 X82.207 Y100.915 E0.07230 ; infill
G1 X81.522 Y100.915 E0.03448 ; infill
G1 X80.506 Y101.931 E0.07230 ; infill
G1 X80.256 Y101.931 E0.01260 ; infill
G1 X80.256 Y101.496 E0.02188 ; infill
G1 X81.038 Y100.714 E0.05566 ; infill
G1 F8640
G1 X80.256 Y101.496 E-0.25530 ; wipe and retract
G1 X80.256 Y101.931 E-0.10036 ; wipe and retract
G1 X80.506 Y101.931 E-0.05779 ; wipe and retract
G1 X81.522 Y100.915 E-0.33164 ; wipe and retract
G1 X81.587 Y100.915 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X56.832 Y70.795 ; move to first perimeter point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X54.243 Y68.623 E0.13920 ; perimeter
G1 X51.794 Y71.541 E0.15696 ; perimeter
G1 X51.287 Y71.115 E0.02729 ; perimeter
G1 X60.284 Y60.393 E0.57663 ; perimeter
G1 X60.792 Y60.819 E0.02729 ; perimeter
G1 X58.343 Y63.737 E0.15696 ; perimeter
G1 X60.931 Y65.909 E0.13920 ; perimeter
G1 X60.587 Y66.320 E0.02205 ; perimeter
G1 X57.999 Y64.148 E0.13920 ; perimeter
G1 X54.587 Y68.213 E0.21861 ; perimeter
G1 X57.176 Y70.385 E0.13920 ; perimeter
G1 X56.870 Y70.749 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.881 Y71.353 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X54.292 Y69.181 E0.13920 ; perimeter
G1 X51.843 Y72.100 E0.15696 ; perimeter
G1 X50.728 Y71.164 E0.05995 ; perimeter
G1 X60.235 Y59.835 E0.60929 ; perimeter
G1 X61.350 Y60.770 E0.05995 ; perimeter
G1 X58.901 Y63.689 E0.15696 ; perimeter
G1 X61.490 Y65.861 E0.13920 ; perimeter
G1 X60.636 Y66.878 E0.05471 ; perimeter
G1 X58.047 Y64.706 E0.13920 ; perimeter
G1 X55.146 Y68.164 E0.18596 ; perimeter
G1 X57.734 Y70.336 E0.13920 ; perimeter
G1 X56.919 Y71.307 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.609 Y71.060 F10800.000 ; move inwards before travel
G1 F8640
G1 X54.361 Y69.237 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X98.987 Y81.038 ; move to first perimeter point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.04695 ; perimeter
G1 X97.847 Y76.817 E0.17385 ; perimeter
G1 X98.987 Y76.817 E0.04695 ; perimeter
G1 X98.987 Y80.978 E0.17138 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.15621 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X65.018 Y60.091 E0.89919 ; perimeter
G1 X64.658 Y59.830 E0.01834 ; perimeter
G1 X64.245 Y59.614 E0.01917 ; perimeter
G1 X63.809 Y59.463 E0.01903 ; perimeter
G1 X63.359 Y59.382 E0.01884 ; perimeter
G1 X62.906 Y59.377 E0.01864 ; perimeter
G1 X62.464 Y59.450 E0.01847 ; perimeter
G1 X62.047 Y59.605 E0.01834 ; perimeter
G1 X61.832 Y59.738 E0.01039 ; perimeter
G1 X61.274 Y59.270 E0.03004 ; perimeter
G1 X61.551 Y59.072 E0.01403 ; perimeter
G1 X61.883 Y58.908 E0.01525 ; perimeter
G1 X62.264 Y58.790 E0.01642 ; perimeter
G1 X62.648 Y58.732 E0.01602 ; perimeter
G1 X63.076 Y58.729 E0.01765 ; perimeter
G1 X63.658 Y58.812 E0.02420 ; perimeter
G1 X64.093 Y58.941 E0.01869 ; perimeter
G1 X64.530 Y59.129 E0.01959 ; perimeter
G1 X64.859 Y59.319 E0.01567 ; perimeter
G1 X65.363 Y59.681 E0.02554 ; perimeter
G1 X81.934 Y73.586 E0.89114 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y76.421 E0.18445 ; perimeter
G1 X99.383 Y76.421 E0.07960 ; perimeter
G1 X99.383 Y81.374 E0.20403 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.17848 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X64.774 Y60.403 E0.90455 ; perimeter
G1 X64.449 Y60.167 E0.01657 ; perimeter
G1 X64.088 Y59.979 E0.01678 ; perimeter
G1 X63.708 Y59.847 E0.01654 ; perimeter
G1 X63.321 Y59.778 E0.01621 ; perimeter
G1 X62.937 Y59.773 E0.01584 ; perimeter
G1 X62.566 Y59.835 E0.01546 ; perimeter
G1 X62.222 Y59.963 E0.01513 ; perimeter
G1 X61.915 Y60.154 E0.01489 ; perimeter
G1 X61.820 Y60.245 E0.00544 ; perimeter
G1 X60.688 Y59.295 E0.06089 ; perimeter
G1 X61.002 Y58.977 E0.01843 ; perimeter
G1 X61.347 Y58.730 E0.01746 ; perimeter
G1 X61.736 Y58.539 E0.01787 ; perimeter
G1 X62.167 Y58.405 E0.01862 ; perimeter
G1 X62.620 Y58.336 E0.01887 ; perimeter
G1 X63.103 Y58.332 E0.01989 ; perimeter
G1 X63.743 Y58.424 E0.02662 ; perimeter
G1 X64.228 Y58.567 E0.02087 ; perimeter
G1 X64.708 Y58.774 E0.02150 ; perimeter
G1 X65.075 Y58.985 E0.01744 ; perimeter
G1 X65.606 Y59.368 E0.02698 ; perimeter
G1 X82.078 Y73.189 E0.88580 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y76.025 E0.18445 ; perimeter
G1 X99.780 Y76.025 E0.11226 ; perimeter
G1 X99.780 Y81.770 E0.23669 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.408 Y81.683 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.488 Y81.816 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X97.962 Y80.807 ; move to first infill point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7144.25
G1 X98.671 Y80.099 E0.05247 ; infill
G1 X98.671 Y79.386 E0.03732 ; infill
G1 X98.163 Y79.894 E0.03760 ; infill
G1 X98.163 Y79.181 E0.03732 ; infill
G1 X98.671 Y78.674 E0.03760 ; infill
G1 X98.671 Y77.961 E0.03732 ; infill
G1 X98.163 Y78.469 E0.03760 ; infill
G1 X98.163 Y77.756 E0.03732 ; infill
G1 X98.872 Y77.048 E0.05247 ; infill
G1 F8640
G1 X98.163 Y77.756 E-0.23134 ; wipe and retract
G1 X98.163 Y78.469 E-0.16455 ; wipe and retract
G1 X98.671 Y77.961 E-0.16575 ; wipe and retract
G1 X98.671 Y78.674 E-0.16455 ; wipe and retract
G1 X98.567 Y78.777 E-0.03381 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.224 Y87.066 E0.12717 ; perimeter
G1 X76.568 Y86.656 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.12717 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X83.244 Y78.700 E0.12717 ; perimeter
G1 X83.588 Y78.290 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.12717 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.665 Y87.115 E0.12717 ; perimeter
G1 X76.519 Y86.098 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.12717 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.686 Y78.749 E0.12717 ; perimeter
G1 X83.540 Y77.731 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.12717 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.412 Y78.290 E0.12717 ; perimeter
G1 X166.756 Y78.700 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.12717 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.432 Y86.656 E0.12717 ; perimeter
G1 X173.776 Y87.066 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.12717 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X166.460 Y77.731 E0.12717 ; perimeter
G1 X167.196 Y78.608 E0.04717 ; perimeter
G1 X167.314 Y78.749 E0.00754 ; perimeter
G1 X164.949 Y80.733 E0.12717 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X173.481 Y86.098 E0.12717 ; perimeter
G1 X174.335 Y87.115 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.12717 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X151.013 Y81.038 ; move to first perimeter point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y76.817 E0.17385 ; perimeter
G1 X152.153 Y76.817 E0.04695 ; perimeter
G1 X152.153 Y81.038 E0.17385 ; perimeter
G1 X151.073 Y81.038 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.617 Y76.421 E0.20651 ; perimeter
G1 X152.549 Y76.421 E0.07960 ; perimeter
G1 X152.549 Y80.899 E0.18445 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X184.637 Y59.681 E0.89114 ; perimeter
G1 X185.140 Y59.319 E0.02554 ; perimeter
G1 X185.470 Y59.129 E0.01567 ; perimeter
G1 X185.907 Y58.941 E0.01959 ; perimeter
G1 X186.348 Y58.810 E0.01895 ; perimeter
G1 X186.779 Y58.740 E0.01799 ; perimeter
G1 X187.352 Y58.733 E0.02361 ; perimeter
G1 X187.753 Y58.794 E0.01669 ; perimeter
G1 X188.109 Y58.904 E0.01534 ; perimeter
G1 X188.449 Y59.072 E0.01564 ; perimeter
G1 X188.726 Y59.270 E0.01403 ; perimeter
G1 X188.168 Y59.738 E0.03004 ; perimeter
G1 X187.953 Y59.605 E0.01039 ; perimeter
G1 X187.536 Y59.450 E0.01834 ; perimeter
G1 X187.094 Y59.377 E0.01847 ; perimeter
G1 X186.641 Y59.382 E0.01864 ; perimeter
G1 X186.191 Y59.463 E0.01884 ; perimeter
G1 X185.755 Y59.614 E0.01903 ; perimeter
G1 X185.346 Y59.828 E0.01902 ; perimeter
G1 X185.067 Y60.025 E0.01405 ; perimeter
G1 X168.261 Y74.121 E0.90362 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X150.677 Y81.434 E0.15374 ; perimeter
M73 P66 R45
M204 S1000 ; adjust acceleration
G1 X150.220 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X150.220 Y76.025 E0.23916 ; perimeter
G1 X152.945 Y76.025 E0.11226 ; perimeter
G1 X152.945 Y80.502 E0.18445 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X184.394 Y59.368 E0.88580 ; perimeter
G1 X184.925 Y58.985 E0.02698 ; perimeter
G1 X185.292 Y58.774 E0.01744 ; perimeter
G1 X185.772 Y58.567 E0.02150 ; perimeter
G1 X186.259 Y58.423 E0.02096 ; perimeter
G1 X186.745 Y58.344 E0.02025 ; perimeter
G1 X187.380 Y58.337 E0.02617 ; perimeter
G1 X187.838 Y58.406 E0.01911 ; perimeter
G1 X188.120 Y58.489 E0.01209 ; perimeter
G1 X188.261 Y58.537 E0.00614 ; perimeter
G1 X188.653 Y58.730 E0.01801 ; perimeter
G1 X188.998 Y58.977 E0.01746 ; perimeter
G1 X189.312 Y59.295 E0.01843 ; perimeter
G1 X188.180 Y60.245 E0.06089 ; perimeter
G1 X188.085 Y60.154 E0.00544 ; perimeter
G1 X187.778 Y59.963 E0.01489 ; perimeter
G1 X187.434 Y59.835 E0.01513 ; perimeter
G1 X187.063 Y59.773 E0.01546 ; perimeter
G1 X186.679 Y59.778 E0.01584 ; perimeter
G1 X186.292 Y59.847 E0.01621 ; perimeter
G1 X185.912 Y59.979 E0.01654 ; perimeter
G1 X185.553 Y60.167 E0.01672 ; perimeter
G1 X185.309 Y60.339 E0.01229 ; perimeter
G1 X168.405 Y74.517 E0.90888 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X150.280 Y81.830 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.359 Y81.455 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.246 Y78.539 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X151.128 Y80.807 ; move to first infill point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7144.25
G1 X151.837 Y80.099 E0.05247 ; infill
G1 X151.837 Y79.386 E0.03732 ; infill
G1 X151.329 Y79.894 E0.03760 ; infill
G1 X151.329 Y79.181 E0.03732 ; infill
G1 X151.837 Y78.674 E0.03760 ; infill
G1 X151.837 Y77.961 E0.03732 ; infill
G1 X151.329 Y78.469 E0.03760 ; infill
G1 X151.329 Y77.756 E0.03732 ; infill
G1 X152.038 Y77.048 E0.05247 ; infill
G1 F8640
G1 X151.329 Y77.756 E-0.23134 ; wipe and retract
G1 X151.329 Y78.469 E-0.16455 ; wipe and retract
G1 X151.837 Y77.961 E-0.16575 ; wipe and retract
G1 X151.837 Y78.674 E-0.16455 ; wipe and retract
G1 X151.733 Y78.777 E-0.03381 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X193.168 Y70.795 ; move to first perimeter point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X192.824 Y70.385 E0.02205 ; perimeter
G1 X195.413 Y68.213 E0.13920 ; perimeter
G1 X192.001 Y64.148 E0.21861 ; perimeter
G1 X189.413 Y66.320 E0.13920 ; perimeter
G1 X189.069 Y65.909 E0.02205 ; perimeter
G1 X191.657 Y63.737 E0.13920 ; perimeter
G1 X189.208 Y60.819 E0.15696 ; perimeter
G1 X189.716 Y60.393 E0.02729 ; perimeter
G1 X198.713 Y71.115 E0.57663 ; perimeter
G1 X198.206 Y71.541 E0.02729 ; perimeter
G1 X195.757 Y68.623 E0.15696 ; perimeter
G1 X193.214 Y70.756 E0.13673 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.119 Y71.353 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X192.266 Y70.336 E0.05471 ; perimeter
G1 X194.854 Y68.164 E0.13920 ; perimeter
G1 X191.953 Y64.706 E0.18596 ; perimeter
G1 X189.364 Y66.878 E0.13920 ; perimeter
G1 X188.510 Y65.861 E0.05471 ; perimeter
G1 X191.099 Y63.689 E0.13920 ; perimeter
G1 X188.650 Y60.770 E0.15696 ; perimeter
G1 X189.765 Y59.835 E0.05995 ; perimeter
G1 X199.272 Y71.164 E0.60929 ; perimeter
G1 X198.157 Y72.100 E0.05995 ; perimeter
G1 X195.708 Y69.181 E0.15696 ; perimeter
G1 X193.165 Y71.315 E0.13673 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.162 Y70.955 F10800.000 ; move inwards before travel
G1 F8640
G1 X192.266 Y70.336 E-0.30695 ; wipe and retract
G1 X193.769 Y69.075 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X150.205 Y100.738 ; move to first perimeter point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.205 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E0.89412 ; perimeter
G1 X199.332 Y77.192 E1.47472 ; perimeter
G1 X199.651 Y76.883 E0.01834 ; perimeter
G1 X199.936 Y76.514 E0.01918 ; perimeter
G1 X200.160 Y76.110 E0.01903 ; perimeter
G1 X200.318 Y75.681 E0.01884 ; perimeter
G1 X200.402 Y75.236 E0.01864 ; perimeter
G1 X200.406 Y74.788 E0.01847 ; perimeter
G1 X200.326 Y74.350 E0.01834 ; perimeter
G1 X200.162 Y73.942 E0.01809 ; perimeter
G1 X199.975 Y73.656 E0.01408 ; perimeter
G1 X199.167 Y72.689 E0.05195 ; perimeter
G1 X199.675 Y72.262 E0.02735 ; perimeter
G1 X200.566 Y73.324 E0.05709 ; perimeter
G1 X200.782 Y73.629 E0.01540 ; perimeter
G1 X200.937 Y73.955 E0.01486 ; perimeter
G1 X201.041 Y74.310 E0.01525 ; perimeter
G1 X201.091 Y74.705 E0.01642 ; perimeter
G1 X201.081 Y75.094 E0.01602 ; perimeter
G1 X201.010 Y75.516 E0.01765 ; perimeter
G1 X200.827 Y76.075 E0.02420 ; perimeter
G1 X200.624 Y76.483 E0.01877 ; perimeter
G1 X200.431 Y76.780 E0.01460 ; perimeter
G1 X200.047 Y77.253 E0.02510 ; perimeter
G1 X199.679 Y77.599 E0.02082 ; perimeter
G1 X172.104 Y100.738 E1.48293 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X150.265 Y100.738 E0.62141 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.808 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.809 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E0.90450 ; perimeter
G1 X199.066 Y76.898 E1.46819 ; perimeter
G1 X199.355 Y76.618 E0.01657 ; perimeter
G1 X199.604 Y76.295 E0.01678 ; perimeter
G1 X199.799 Y75.945 E0.01654 ; perimeter
G1 X199.934 Y75.575 E0.01621 ; perimeter
G1 X200.006 Y75.197 E0.01584 ; perimeter
G1 X200.009 Y74.822 E0.01546 ; perimeter
G1 X199.943 Y74.461 E0.01513 ; perimeter
G1 X199.809 Y74.127 E0.01483 ; perimeter
G1 X199.656 Y73.893 E0.01151 ; perimeter
G1 X198.609 Y72.639 E0.06728 ; perimeter
G1 X199.724 Y71.704 E0.05997 ; perimeter
G1 X200.880 Y73.081 E0.07407 ; perimeter
G1 X201.126 Y73.430 E0.01757 ; perimeter
G1 X201.309 Y73.813 E0.01750 ; perimeter
G1 X201.430 Y74.229 E0.01787 ; perimeter
G1 X201.487 Y74.677 E0.01862 ; perimeter
G1 X201.476 Y75.135 E0.01887 ; perimeter
G1 X201.396 Y75.611 E0.01989 ; perimeter
G1 X201.195 Y76.226 E0.02662 ; perimeter
G1 X200.969 Y76.680 E0.02089 ; perimeter
G1 X200.752 Y77.013 E0.01639 ; perimeter
G1 X200.338 Y77.523 E0.02705 ; perimeter
G1 X199.943 Y77.896 E0.02238 ; perimeter
G1 X172.248 Y101.134 E1.48935 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X149.868 Y101.134 E0.62141 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.018 Y100.794 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.809 Y99.806 E-0.30695 ; wipe and retract
G1 X151.771 Y99.806 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X166.843 Y100.714 ; move to first infill point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.061 Y101.496 E0.05566 ; infill
G1 X166.061 Y101.931 E0.02188 ; infill
G1 X166.312 Y101.931 E0.01260 ; infill
G1 X167.327 Y100.915 E0.07230 ; infill
G1 X168.012 Y100.915 E0.03448 ; infill
G1 X166.996 Y101.931 E0.07230 ; infill
G1 X167.681 Y101.931 E0.03448 ; infill
G1 X168.697 Y100.915 E0.07230 ; infill
G1 X169.382 Y100.915 E0.03448 ; infill
G1 X168.366 Y101.931 E0.07230 ; infill
G1 X169.051 Y101.931 E0.03448 ; infill
G1 X169.744 Y101.238 E0.04931 ; infill
G1 X169.744 Y101.923 E0.03448 ; infill
G1 X169.535 Y102.131 E0.01484 ; infill
G1 F8640
G1 X169.744 Y101.923 E-0.06809 ; wipe and retract
G1 X169.744 Y101.238 E-0.15815 ; wipe and retract
G1 X169.051 Y101.931 E-0.22616 ; wipe and retract
G1 X168.366 Y101.931 E-0.15815 ; wipe and retract
G1 X168.824 Y101.473 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X99.510 Y138.884 ; move to first perimeter point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.62388 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X50.035 Y115.745 E1.48293 ; perimeter
G1 X49.664 Y115.395 E0.02105 ; perimeter
G1 X49.351 Y115.023 E0.02001 ; perimeter
G1 X49.090 Y114.627 E0.01955 ; perimeter
G1 X48.885 Y114.215 E0.01895 ; perimeter
G1 X48.738 Y113.797 E0.01826 ; perimeter
G1 X48.651 Y113.381 E0.01749 ; perimeter
G1 X48.624 Y112.977 E0.01670 ; perimeter
G1 X48.653 Y112.591 E0.01595 ; perimeter
G1 X48.774 Y112.107 E0.02056 ; perimeter
G1 X48.933 Y111.776 E0.01513 ; perimeter
G1 X49.091 Y111.548 E0.01143 ; perimeter
G1 X50.041 Y110.409 E0.06108 ; perimeter
G1 X50.547 Y110.834 E0.02722 ; perimeter
G1 X49.782 Y111.745 E0.04901 ; perimeter
G1 X49.554 Y112.085 E0.01685 ; perimeter
G1 X49.389 Y112.496 E0.01826 ; perimeter
G1 X49.309 Y112.934 E0.01834 ; perimeter
G1 X49.313 Y113.382 E0.01847 ; perimeter
G1 X49.397 Y113.827 E0.01864 ; perimeter
G1 X49.555 Y114.256 E0.01884 ; perimeter
G1 X49.779 Y114.660 E0.01903 ; perimeter
G1 X50.063 Y115.029 E0.01917 ; perimeter
G1 X50.383 Y115.338 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.47472 ; perimeter
G1 X99.510 Y138.349 E0.89412 ; perimeter
G1 X99.510 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.907 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.62388 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03671 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X49.772 Y116.042 E1.48935 ; perimeter
G1 X49.375 Y115.668 E0.02246 ; perimeter
G1 X49.033 Y115.261 E0.02191 ; perimeter
G1 X48.746 Y114.825 E0.02149 ; perimeter
G1 X48.519 Y114.370 E0.02096 ; perimeter
G1 X48.356 Y113.904 E0.02035 ; perimeter
G1 X48.258 Y113.436 E0.01968 ; perimeter
G1 X48.226 Y112.975 E0.01901 ; perimeter
G1 X48.260 Y112.530 E0.01838 ; perimeter
G1 X48.405 Y111.961 E0.02420 ; perimeter
G1 X48.589 Y111.576 E0.01759 ; perimeter
G1 X48.776 Y111.307 E0.01347 ; perimeter
G1 X49.991 Y109.850 E0.07818 ; perimeter
G1 X51.106 Y110.785 E0.05992 ; perimeter
G1 X50.100 Y111.984 E0.06447 ; perimeter
G1 X49.906 Y112.271 E0.01426 ; perimeter
G1 X49.772 Y112.607 E0.01489 ; perimeter
G1 X49.706 Y112.968 E0.01513 ; perimeter
G1 X49.709 Y113.343 E0.01546 ; perimeter
G1 X49.780 Y113.721 E0.01584 ; perimeter
G1 X49.916 Y114.091 E0.01621 ; perimeter
G1 X50.111 Y114.441 E0.01654 ; perimeter
G1 X50.360 Y114.764 E0.01678 ; perimeter
G1 X50.649 Y115.044 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.46819 ; perimeter
G1 X99.906 Y137.952 E0.90450 ; perimeter
G1 X99.907 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.507 Y139.272 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.615 Y139.233 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X83.445 Y140.278 ; move to first infill point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.654 Y140.069 E0.01484 ; infill
G1 X83.654 Y139.384 E0.03448 ; infill
G1 X82.961 Y140.077 E0.04931 ; infill
G1 X82.276 Y140.077 E0.03448 ; infill
G1 X83.292 Y139.061 E0.07230 ; infill
G1 X82.607 Y139.061 E0.03448 ; infill
G1 X81.591 Y140.077 E0.07230 ; infill
G1 X80.906 Y140.077 E0.03448 ; infill
G1 X81.922 Y139.061 E0.07230 ; infill
G1 X81.237 Y139.061 E0.03448 ; infill
G1 X80.221 Y140.077 E0.07230 ; infill
G1 X79.971 Y140.077 E0.01260 ; infill
G1 X79.971 Y139.642 E0.02188 ; infill
G1 X80.753 Y138.860 E0.05566 ; infill
G1 F8640
G1 X79.971 Y139.642 E-0.25530 ; wipe and retract
G1 X79.971 Y140.077 E-0.10036 ; wipe and retract
G1 X80.221 Y140.077 E-0.05779 ; wipe and retract
G1 X81.237 Y139.061 E-0.33164 ; wipe and retract
G1 X81.301 Y139.061 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X56.547 Y108.941 ; move to first perimeter point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X53.958 Y106.769 E0.13920 ; perimeter
G1 X51.509 Y109.688 E0.15696 ; perimeter
G1 X51.002 Y109.262 E0.02729 ; perimeter
G1 X59.999 Y98.539 E0.57663 ; perimeter
G1 X60.506 Y98.965 E0.02729 ; perimeter
G1 X58.057 Y101.884 E0.15696 ; perimeter
G1 X60.646 Y104.056 E0.13920 ; perimeter
G1 X60.302 Y104.466 E0.02205 ; perimeter
G1 X57.713 Y102.294 E0.13920 ; perimeter
G1 X54.302 Y106.359 E0.21861 ; perimeter
G1 X56.891 Y108.531 E0.13920 ; perimeter
G1 X56.585 Y108.895 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.596 Y109.499 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X54.007 Y107.327 E0.13920 ; perimeter
G1 X51.558 Y110.246 E0.15696 ; perimeter
G1 X50.443 Y109.310 E0.05995 ; perimeter
G1 X59.950 Y97.981 E0.60929 ; perimeter
G1 X61.065 Y98.916 E0.05995 ; perimeter
G1 X58.616 Y101.835 E0.15696 ; perimeter
G1 X61.204 Y104.007 E0.13920 ; perimeter
G1 X60.351 Y105.024 E0.05471 ; perimeter
G1 X57.762 Y102.852 E0.13920 ; perimeter
G1 X54.861 Y106.310 E0.18596 ; perimeter
G1 X57.449 Y108.482 E0.13920 ; perimeter
G1 X56.634 Y109.453 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.324 Y109.206 F10800.000 ; move inwards before travel
G1 F8640
G1 X54.076 Y107.383 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X98.702 Y119.184 ; move to first perimeter point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.04695 ; perimeter
G1 X97.562 Y114.964 E0.17385 ; perimeter
G1 X98.702 Y114.964 E0.04695 ; perimeter
G1 X98.702 Y119.124 E0.17138 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.15621 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X64.733 Y98.237 E0.89919 ; perimeter
G1 X64.373 Y97.976 E0.01834 ; perimeter
G1 X63.960 Y97.760 E0.01917 ; perimeter
G1 X63.524 Y97.609 E0.01903 ; perimeter
G1 X63.073 Y97.528 E0.01884 ; perimeter
G1 X62.621 Y97.523 E0.01864 ; perimeter
G1 X62.179 Y97.597 E0.01847 ; perimeter
G1 X61.761 Y97.751 E0.01834 ; perimeter
G1 X61.547 Y97.885 E0.01039 ; perimeter
G1 X60.989 Y97.416 E0.03004 ; perimeter
G1 X61.266 Y97.218 E0.01403 ; perimeter
G1 X61.598 Y97.054 E0.01525 ; perimeter
G1 X61.978 Y96.936 E0.01642 ; perimeter
G1 X62.363 Y96.879 E0.01602 ; perimeter
G1 X62.791 Y96.875 E0.01765 ; perimeter
G1 X63.373 Y96.958 E0.02420 ; perimeter
G1 X63.808 Y97.087 E0.01869 ; perimeter
G1 X64.245 Y97.275 E0.01959 ; perimeter
G1 X64.574 Y97.465 E0.01567 ; perimeter
G1 X65.078 Y97.827 E0.02554 ; perimeter
G1 X81.649 Y111.732 E0.89114 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y114.567 E0.18445 ; perimeter
G1 X99.098 Y114.567 E0.07960 ; perimeter
G1 X99.098 Y119.520 E0.20403 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.17848 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X64.489 Y98.549 E0.90455 ; perimeter
G1 X64.163 Y98.314 E0.01657 ; perimeter
G1 X63.803 Y98.125 E0.01678 ; perimeter
G1 X63.423 Y97.993 E0.01654 ; perimeter
G1 X63.036 Y97.924 E0.01621 ; perimeter
G1 X62.651 Y97.920 E0.01584 ; perimeter
G1 X62.281 Y97.981 E0.01546 ; perimeter
G1 X61.937 Y98.109 E0.01513 ; perimeter
G1 X61.630 Y98.300 E0.01489 ; perimeter
G1 X61.535 Y98.391 E0.00544 ; perimeter
G1 X60.403 Y97.441 E0.06089 ; perimeter
G1 X60.717 Y97.123 E0.01843 ; perimeter
G1 X61.062 Y96.876 E0.01746 ; perimeter
G1 X61.451 Y96.685 E0.01787 ; perimeter
G1 X61.882 Y96.551 E0.01862 ; perimeter
G1 X62.335 Y96.482 E0.01887 ; perimeter
G1 X62.818 Y96.478 E0.01989 ; perimeter
G1 X63.458 Y96.570 E0.02662 ; perimeter
G1 X63.943 Y96.713 E0.02087 ; perimeter
G1 X64.422 Y96.920 E0.02150 ; perimeter
G1 X64.789 Y97.131 E0.01744 ; perimeter
G1 X65.321 Y97.514 E0.02698 ; perimeter
G1 X81.793 Y111.335 E0.88580 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y114.171 E0.18445 ; perimeter
G1 X99.494 Y114.171 E0.11226 ; perimeter
G1 X99.494 Y119.916 E0.23669 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.123 Y119.829 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.203 Y119.962 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X97.677 Y118.954 ; move to first infill point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7144.25
G1 X98.386 Y118.245 E0.05247 ; infill
G1 X98.386 Y117.532 E0.03732 ; infill
G1 X97.878 Y118.040 E0.03760 ; infill
G1 X97.878 Y117.327 E0.03732 ; infill
G1 X98.386 Y116.820 E0.03760 ; infill
G1 X98.386 Y116.107 E0.03732 ; infill
G1 X97.878 Y116.615 E0.03760 ; infill
G1 X97.878 Y115.902 E0.03732 ; infill
G1 X98.587 Y115.194 E0.05247 ; infill
G1 F8640
G1 X97.878 Y115.902 E-0.23134 ; wipe and retract
G1 X97.878 Y116.615 E-0.16455 ; wipe and retract
G1 X98.386 Y116.107 E-0.16575 ; wipe and retract
G1 X98.386 Y116.820 E-0.16455 ; wipe and retract
G1 X98.282 Y116.923 E-0.03381 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X75.939 Y125.213 E0.12717 ; perimeter
G1 X76.283 Y124.803 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.12717 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X82.959 Y116.846 E0.12717 ; perimeter
G1 X83.303 Y116.436 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.12717 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.380 Y125.261 E0.12717 ; perimeter
G1 X76.234 Y124.244 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.12717 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X82.401 Y116.895 E0.12717 ; perimeter
G1 X83.254 Y115.877 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.12717 ; perimeter
M73 Q66 S46
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.126 Y116.436 E0.12717 ; perimeter
G1 X166.471 Y116.846 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.12717 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.147 Y124.803 E0.12717 ; perimeter
G1 X173.491 Y125.213 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.12717 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.175 Y115.877 E0.12717 ; perimeter
G1 X166.911 Y116.754 E0.04717 ; perimeter
G1 X167.029 Y116.895 E0.00754 ; perimeter
G1 X164.664 Y118.879 E0.12717 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.196 Y124.244 E0.12717 ; perimeter
G1 X174.049 Y125.261 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.12717 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X150.728 Y119.184 ; move to first perimeter point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y114.964 E0.17385 ; perimeter
G1 X151.868 Y114.964 E0.04695 ; perimeter
G1 X151.868 Y119.184 E0.17385 ; perimeter
G1 X150.788 Y119.184 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.332 Y114.567 E0.20651 ; perimeter
G1 X152.264 Y114.567 E0.07960 ; perimeter
G1 X152.264 Y119.045 E0.18445 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X184.352 Y97.827 E0.89114 ; perimeter
G1 X184.855 Y97.465 E0.02554 ; perimeter
G1 X185.185 Y97.275 E0.01567 ; perimeter
G1 X185.622 Y97.087 E0.01959 ; perimeter
G1 X186.063 Y96.956 E0.01895 ; perimeter
G1 X186.494 Y96.886 E0.01799 ; perimeter
G1 X187.067 Y96.879 E0.02361 ; perimeter
G1 X187.467 Y96.940 E0.01669 ; perimeter
G1 X187.823 Y97.050 E0.01534 ; perimeter
G1 X188.164 Y97.218 E0.01564 ; perimeter
G1 X188.441 Y97.416 E0.01403 ; perimeter
G1 X187.882 Y97.885 E0.03004 ; perimeter
G1 X187.668 Y97.751 E0.01039 ; perimeter
G1 X187.251 Y97.597 E0.01834 ; perimeter
G1 X186.809 Y97.523 E0.01847 ; perimeter
G1 X186.356 Y97.528 E0.01864 ; perimeter
G1 X185.906 Y97.609 E0.01884 ; perimeter
G1 X185.470 Y97.760 E0.01903 ; perimeter
G1 X185.060 Y97.974 E0.01902 ; perimeter
G1 X184.782 Y98.171 E0.01405 ; perimeter
G1 X167.976 Y112.267 E0.90362 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X150.392 Y119.580 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.935 Y114.171 E0.23916 ; perimeter
G1 X152.660 Y114.171 E0.11226 ; perimeter
G1 X152.660 Y118.648 E0.18445 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X184.109 Y97.514 E0.88580 ; perimeter
G1 X184.640 Y97.131 E0.02698 ; perimeter
G1 X185.007 Y96.920 E0.01744 ; perimeter
G1 X185.486 Y96.713 E0.02150 ; perimeter
G1 X185.974 Y96.569 E0.02096 ; perimeter
G1 X186.459 Y96.490 E0.02025 ; perimeter
G1 X187.095 Y96.483 E0.02617 ; perimeter
G1 X187.553 Y96.552 E0.01911 ; perimeter
G1 X187.835 Y96.635 E0.01209 ; perimeter
G1 X187.976 Y96.683 E0.00614 ; perimeter
G1 X188.368 Y96.876 E0.01801 ; perimeter
G1 X188.713 Y97.123 E0.01746 ; perimeter
G1 X189.027 Y97.441 E0.01843 ; perimeter
G1 X187.895 Y98.391 E0.06089 ; perimeter
G1 X187.800 Y98.300 E0.00544 ; perimeter
G1 X187.493 Y98.109 E0.01489 ; perimeter
G1 X187.148 Y97.981 E0.01513 ; perimeter
G1 X186.778 Y97.920 E0.01546 ; perimeter
G1 X186.394 Y97.924 E0.01584 ; perimeter
G1 X186.006 Y97.993 E0.01621 ; perimeter
G1 X185.627 Y98.125 E0.01654 ; perimeter
G1 X185.267 Y98.313 E0.01672 ; perimeter
G1 X185.024 Y98.485 E0.01229 ; perimeter
G1 X168.120 Y112.663 E0.90888 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X149.995 Y119.976 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.074 Y119.601 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.961 Y116.685 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X150.843 Y118.954 ; move to first infill point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7144.25
G1 X151.552 Y118.245 E0.05247 ; infill
G1 X151.552 Y117.532 E0.03732 ; infill
G1 X151.044 Y118.040 E0.03760 ; infill
G1 X151.044 Y117.327 E0.03732 ; infill
G1 X151.552 Y116.820 E0.03760 ; infill
G1 X151.552 Y116.107 E0.03732 ; infill
G1 X151.044 Y116.615 E0.03760 ; infill
G1 X151.044 Y115.902 E0.03732 ; infill
G1 X151.752 Y115.194 E0.05247 ; infill
G1 F8640
G1 X151.044 Y115.902 E-0.23134 ; wipe and retract
G1 X151.044 Y116.615 E-0.16455 ; wipe and retract
G1 X151.552 Y116.107 E-0.16575 ; wipe and retract
G1 X151.552 Y116.820 E-0.16455 ; wipe and retract
G1 X151.448 Y116.923 E-0.03381 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X192.883 Y108.941 ; move to first perimeter point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X192.539 Y108.531 E0.02205 ; perimeter
G1 X195.127 Y106.359 E0.13920 ; perimeter
G1 X191.716 Y102.294 E0.21861 ; perimeter
G1 X189.128 Y104.466 E0.13920 ; perimeter
G1 X188.784 Y104.056 E0.02205 ; perimeter
G1 X191.372 Y101.884 E0.13920 ; perimeter
G1 X188.923 Y98.965 E0.15696 ; perimeter
G1 X189.431 Y98.539 E0.02729 ; perimeter
G1 X198.428 Y109.262 E0.57663 ; perimeter
G1 X197.920 Y109.688 E0.02729 ; perimeter
G1 X195.471 Y106.769 E0.15696 ; perimeter
G1 X192.929 Y108.902 E0.13673 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.834 Y109.499 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X191.980 Y108.482 E0.05471 ; perimeter
G1 X194.569 Y106.310 E0.13920 ; perimeter
G1 X191.667 Y102.852 E0.18596 ; perimeter
G1 X189.079 Y105.024 E0.13920 ; perimeter
G1 X188.225 Y104.007 E0.05471 ; perimeter
G1 X190.814 Y101.835 E0.13920 ; perimeter
G1 X188.365 Y98.916 E0.15696 ; perimeter
G1 X189.480 Y97.981 E0.05995 ; perimeter
G1 X198.986 Y109.310 E0.60929 ; perimeter
G1 X197.872 Y110.246 E0.05995 ; perimeter
G1 X195.423 Y107.327 E0.15696 ; perimeter
G1 X192.880 Y109.461 E0.13673 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.877 Y109.102 F10800.000 ; move inwards before travel
G1 F8640
G1 X191.980 Y108.482 E-0.30695 ; wipe and retract
G1 X193.483 Y107.221 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X149.919 Y138.884 ; move to first perimeter point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X149.920 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E0.89412 ; perimeter
G1 X199.047 Y115.338 E1.47472 ; perimeter
G1 X199.366 Y115.029 E0.01834 ; perimeter
G1 X199.650 Y114.660 E0.01918 ; perimeter
G1 X199.875 Y114.256 E0.01903 ; perimeter
G1 X200.033 Y113.827 E0.01884 ; perimeter
G1 X200.116 Y113.382 E0.01864 ; perimeter
G1 X200.121 Y112.934 E0.01847 ; perimeter
G1 X200.041 Y112.496 E0.01834 ; perimeter
G1 X199.877 Y112.089 E0.01809 ; perimeter
G1 X199.690 Y111.803 E0.01408 ; perimeter
G1 X198.881 Y110.835 E0.05195 ; perimeter
G1 X199.390 Y110.408 E0.02735 ; perimeter
G1 X200.281 Y111.470 E0.05709 ; perimeter
G1 X200.496 Y111.775 E0.01540 ; perimeter
G1 X200.652 Y112.101 E0.01486 ; perimeter
G1 X200.756 Y112.456 E0.01525 ; perimeter
G1 X200.806 Y112.851 E0.01642 ; perimeter
G1 X200.796 Y113.240 E0.01602 ; perimeter
G1 X200.725 Y113.663 E0.01765 ; perimeter
G1 X200.542 Y114.221 E0.02420 ; perimeter
G1 X200.339 Y114.629 E0.01877 ; perimeter
G1 X200.146 Y114.926 E0.01460 ; perimeter
G1 X199.762 Y115.399 E0.02510 ; perimeter
G1 X199.394 Y115.745 E0.02082 ; perimeter
G1 X171.819 Y138.884 E1.48293 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X149.979 Y138.884 E0.62141 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.523 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.523 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E0.90450 ; perimeter
G1 X198.781 Y115.044 E1.46819 ; perimeter
G1 X199.070 Y114.764 E0.01657 ; perimeter
G1 X199.318 Y114.441 E0.01678 ; perimeter
G1 X199.514 Y114.091 E0.01654 ; perimeter
G1 X199.649 Y113.721 E0.01621 ; perimeter
G1 X199.720 Y113.343 E0.01584 ; perimeter
G1 X199.724 Y112.968 E0.01546 ; perimeter
G1 X199.658 Y112.607 E0.01513 ; perimeter
G1 X199.524 Y112.273 E0.01483 ; perimeter
G1 X199.371 Y112.039 E0.01151 ; perimeter
G1 X198.324 Y110.786 E0.06728 ; perimeter
G1 X199.439 Y109.850 E0.05997 ; perimeter
G1 X200.595 Y111.227 E0.07407 ; perimeter
G1 X200.840 Y111.576 E0.01757 ; perimeter
G1 X201.024 Y111.959 E0.01750 ; perimeter
G1 X201.145 Y112.375 E0.01787 ; perimeter
G1 X201.202 Y112.824 E0.01862 ; perimeter
G1 X201.191 Y113.281 E0.01887 ; perimeter
G1 X201.111 Y113.758 E0.01989 ; perimeter
G1 X200.910 Y114.372 E0.02662 ; perimeter
G1 X200.684 Y114.826 E0.02089 ; perimeter
G1 X200.467 Y115.159 E0.01639 ; perimeter
G1 X200.053 Y115.669 E0.02705 ; perimeter
G1 X199.658 Y116.042 E0.02238 ; perimeter
G1 X171.963 Y139.280 E1.48935 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X149.583 Y139.280 E0.62141 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.733 Y138.940 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.523 Y137.952 E-0.30695 ; wipe and retract
G1 X151.486 Y137.952 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
G1 X166.558 Y138.860 ; move to first infill point
G1 Z14.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.776 Y139.642 E0.05566 ; infill
G1 X165.776 Y140.077 E0.02188 ; infill
G1 X166.026 Y140.077 E0.01260 ; infill
G1 X167.042 Y139.061 E0.07230 ; infill
G1 X167.727 Y139.061 E0.03448 ; infill
G1 X166.711 Y140.077 E0.07230 ; infill
G1 X167.396 Y140.077 E0.03448 ; infill
G1 X168.412 Y139.061 E0.07230 ; infill
G1 X169.097 Y139.061 E0.03448 ; infill
G1 X168.081 Y140.077 E0.07230 ; infill
G1 X168.766 Y140.077 E0.03448 ; infill
G1 X169.459 Y139.384 E0.04931 ; infill
G1 X169.459 Y140.069 E0.03448 ; infill
G1 X169.250 Y140.278 E0.01484 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;14.75


G1 F8640
G1 X169.459 Y140.069 E-0.06809 ; wipe and retract
G1 X169.459 Y139.384 E-0.15815 ; wipe and retract
G1 X168.766 Y140.077 E-0.22616 ; wipe and retract
G1 X168.081 Y140.077 E-0.15815 ; wipe and retract
G1 X168.539 Y139.619 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;14.75
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X99.491 Y100.738 ; move to first perimeter point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.61134 ; perimeter
M73 P67 R44
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X50.186 Y77.487 E1.49015 ; perimeter
G1 X49.816 Y77.137 E0.02099 ; perimeter
G1 X49.504 Y76.767 E0.01995 ; perimeter
G1 X49.243 Y76.372 E0.01950 ; perimeter
G1 X49.038 Y75.961 E0.01891 ; perimeter
G1 X48.891 Y75.544 E0.01822 ; perimeter
G1 X48.804 Y75.130 E0.01745 ; perimeter
G1 X48.775 Y74.726 E0.01667 ; perimeter
G1 X48.824 Y74.199 E0.02181 ; perimeter
G1 X48.926 Y73.846 E0.01513 ; perimeter
G1 X49.084 Y73.516 E0.01506 ; perimeter
G1 X49.245 Y73.285 E0.01160 ; perimeter
G1 X50.192 Y72.151 E0.06087 ; perimeter
G1 X50.698 Y72.575 E0.02723 ; perimeter
G1 X49.933 Y73.487 E0.04901 ; perimeter
G1 X49.705 Y73.826 E0.01685 ; perimeter
G1 X49.540 Y74.237 E0.01826 ; perimeter
G1 X49.460 Y74.675 E0.01834 ; perimeter
G1 X49.464 Y75.124 E0.01847 ; perimeter
G1 X49.548 Y75.568 E0.01864 ; perimeter
G1 X49.706 Y75.998 E0.01884 ; perimeter
G1 X49.930 Y76.401 E0.01903 ; perimeter
G1 X50.214 Y76.770 E0.01917 ; perimeter
G1 X50.534 Y77.080 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.48193 ; perimeter
G1 X99.488 Y100.203 E0.88148 ; perimeter
G1 X99.491 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.889 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.61141 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03672 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X49.923 Y77.783 E1.49656 ; perimeter
G1 X49.527 Y77.410 E0.02240 ; perimeter
G1 X49.186 Y77.005 E0.02185 ; perimeter
G1 X48.899 Y76.570 E0.02143 ; perimeter
G1 X48.672 Y76.116 E0.02091 ; perimeter
G1 X48.509 Y75.651 E0.02030 ; perimeter
G1 X48.410 Y75.185 E0.01964 ; perimeter
G1 X48.378 Y74.725 E0.01898 ; perimeter
G1 X48.436 Y74.115 E0.02528 ; perimeter
G1 X48.557 Y73.700 E0.01779 ; perimeter
G1 X48.741 Y73.316 E0.01754 ; perimeter
G1 X48.930 Y73.045 E0.01363 ; perimeter
G1 X50.142 Y71.592 E0.07797 ; perimeter
G1 X51.257 Y72.527 E0.05993 ; perimeter
G1 X50.251 Y73.725 E0.06447 ; perimeter
G1 X50.058 Y74.013 E0.01426 ; perimeter
G1 X49.923 Y74.348 E0.01489 ; perimeter
G1 X49.857 Y74.709 E0.01513 ; perimeter
G1 X49.860 Y75.085 E0.01546 ; perimeter
G1 X49.932 Y75.463 E0.01584 ; perimeter
G1 X50.067 Y75.832 E0.01621 ; perimeter
G1 X50.262 Y76.183 E0.01654 ; perimeter
G1 X50.511 Y76.505 E0.01678 ; perimeter
G1 X50.800 Y76.785 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.47540 ; perimeter
G1 X99.883 Y99.806 E0.89179 ; perimeter
G1 X99.889 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.489 Y101.126 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.597 Y101.088 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X84.140 Y101.697 ; move to first infill point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.15
G1 X83.358 Y100.915 E0.05567 ; infill
G1 X82.673 Y100.915 E0.03448 ; infill
G1 X83.688 Y101.931 E0.07230 ; infill
G1 X83.003 Y101.931 E0.03448 ; infill
G1 X81.988 Y100.915 E0.07230 ; infill
G1 X81.303 Y100.915 E0.03448 ; infill
G1 X82.318 Y101.931 E0.07230 ; infill
G1 X81.634 Y101.931 E0.03448 ; infill
G1 X80.618 Y100.915 E0.07230 ; infill
G1 X80.256 Y100.915 E0.01821 ; infill
G1 X80.256 Y101.238 E0.01627 ; infill
G1 X80.949 Y101.931 E0.04930 ; infill
G1 X80.264 Y101.931 E0.03448 ; infill
G1 X80.055 Y101.722 E0.01483 ; infill
G1 F8640
G1 X80.264 Y101.931 E-0.06805 ; wipe and retract
G1 X80.949 Y101.931 E-0.15815 ; wipe and retract
G1 X80.256 Y101.238 E-0.22612 ; wipe and retract
G1 X80.256 Y100.915 E-0.07462 ; wipe and retract
G1 X80.618 Y100.915 E-0.08353 ; wipe and retract
G1 X81.076 Y101.373 E-0.14953 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X56.693 Y70.678 ; move to first perimeter point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X54.109 Y68.510 E0.13893 ; perimeter
G1 X51.660 Y71.429 E0.15696 ; perimeter
G1 X51.153 Y71.003 E0.02729 ; perimeter
G1 X60.150 Y60.280 E0.57663 ; perimeter
G1 X60.658 Y60.706 E0.02729 ; perimeter
G1 X58.209 Y63.625 E0.15696 ; perimeter
G1 X60.792 Y65.793 E0.13893 ; perimeter
G1 X60.448 Y66.203 E0.02205 ; perimeter
G1 X57.864 Y64.035 E0.13893 ; perimeter
G1 X54.453 Y68.100 E0.21861 ; perimeter
G1 X57.037 Y70.268 E0.13893 ; perimeter
G1 X56.731 Y70.632 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.742 Y71.236 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X54.158 Y69.069 E0.13893 ; perimeter
G1 X51.709 Y71.987 E0.15696 ; perimeter
G1 X50.594 Y71.052 E0.05995 ; perimeter
G1 X60.101 Y59.722 E0.60929 ; perimeter
G1 X61.216 Y60.657 E0.05995 ; perimeter
G1 X58.767 Y63.576 E0.15696 ; perimeter
G1 X61.350 Y65.744 E0.13893 ; perimeter
G1 X60.497 Y66.761 E0.05471 ; perimeter
G1 X57.913 Y64.593 E0.13893 ; perimeter
G1 X55.012 Y68.051 E0.18596 ; perimeter
G1 X57.595 Y70.219 E0.13893 ; perimeter
G1 X56.780 Y71.190 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.470 Y70.943 F10800.000 ; move inwards before travel
G1 F8640
G1 X54.222 Y69.120 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X98.987 Y81.038 ; move to first perimeter point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.04695 ; perimeter
G1 X97.847 Y76.642 E0.18106 ; perimeter
G1 X98.987 Y76.642 E0.04695 ; perimeter
G1 X98.987 Y80.978 E0.17859 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.15621 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X64.884 Y59.978 E0.90640 ; perimeter
G1 X64.524 Y59.717 E0.01834 ; perimeter
G1 X64.111 Y59.501 E0.01917 ; perimeter
G1 X63.675 Y59.350 E0.01903 ; perimeter
G1 X63.225 Y59.269 E0.01884 ; perimeter
G1 X62.772 Y59.264 E0.01864 ; perimeter
G1 X62.330 Y59.338 E0.01847 ; perimeter
G1 X61.912 Y59.493 E0.01834 ; perimeter
G1 X61.698 Y59.626 E0.01039 ; perimeter
G1 X61.140 Y59.157 E0.03004 ; perimeter
G1 X61.415 Y58.960 E0.01395 ; perimeter
G1 X61.746 Y58.797 E0.01520 ; perimeter
G1 X62.125 Y58.679 E0.01634 ; perimeter
G1 X62.508 Y58.620 E0.01596 ; perimeter
G1 X62.934 Y58.616 E0.01758 ; perimeter
G1 X63.530 Y58.701 E0.02476 ; perimeter
G1 X63.963 Y58.829 E0.01862 ; perimeter
G1 X64.398 Y59.018 E0.01954 ; perimeter
G1 X64.712 Y59.198 E0.01489 ; perimeter
G1 X65.229 Y59.569 E0.02623 ; perimeter
G1 X81.934 Y73.586 E0.89832 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y76.246 E0.19166 ; perimeter
G1 X99.383 Y76.246 E0.07960 ; perimeter
G1 X99.383 Y81.374 E0.21125 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.17848 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X64.640 Y60.291 E0.91176 ; perimeter
G1 X64.314 Y60.055 E0.01657 ; perimeter
G1 X63.954 Y59.866 E0.01678 ; perimeter
G1 X63.574 Y59.735 E0.01654 ; perimeter
G1 X63.187 Y59.665 E0.01621 ; perimeter
G1 X62.803 Y59.661 E0.01584 ; perimeter
G1 X62.432 Y59.723 E0.01546 ; perimeter
G1 X62.088 Y59.850 E0.01513 ; perimeter
G1 X61.781 Y60.041 E0.01489 ; perimeter
G1 X61.686 Y60.133 E0.00544 ; perimeter
G1 X60.554 Y59.183 E0.06089 ; perimeter
G1 X60.867 Y58.865 E0.01838 ; perimeter
G1 X61.211 Y58.619 E0.01741 ; perimeter
G1 X61.598 Y58.427 E0.01782 ; perimeter
G1 X62.028 Y58.293 E0.01855 ; perimeter
G1 X62.479 Y58.224 E0.01880 ; perimeter
G1 X62.960 Y58.219 E0.01982 ; perimeter
G1 X63.614 Y58.313 E0.02721 ; perimeter
G1 X64.099 Y58.456 E0.02080 ; perimeter
G1 X64.576 Y58.663 E0.02145 ; perimeter
G1 X64.926 Y58.864 E0.01663 ; perimeter
G1 X65.472 Y59.255 E0.02766 ; perimeter
G1 X82.078 Y73.189 E0.89301 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y75.850 E0.19166 ; perimeter
G1 X99.780 Y75.850 E0.11226 ; perimeter
G1 X99.780 Y81.770 E0.24390 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.408 Y81.681 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.488 Y81.816 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X98.872 Y80.908 ; move to first infill point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7888.04
G1 X98.163 Y80.200 E0.04753 ; infill
G1 X98.163 Y79.554 E0.03062 ; infill
G1 X98.671 Y80.062 E0.03405 ; infill
G1 X98.671 Y79.417 E0.03062 ; infill
G1 X98.163 Y78.909 E0.03405 ; infill
G1 X98.163 Y78.264 E0.03062 ; infill
G1 X98.671 Y78.771 E0.03405 ; infill
G1 X98.671 Y78.126 E0.03062 ; infill
G1 X98.163 Y77.618 E0.03405 ; infill
G1 X98.163 Y76.973 E0.03062 ; infill
G1 X98.872 Y77.681 E0.04753 ; infill
G1 F8640
G1 X98.163 Y76.973 E-0.23134 ; wipe and retract
G1 X98.163 Y77.618 E-0.14903 ; wipe and retract
G1 X98.671 Y78.126 E-0.16575 ; wipe and retract
G1 X98.671 Y78.771 E-0.14903 ; wipe and retract
G1 X98.472 Y78.573 E-0.06484 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.286 Y87.119 E0.12383 ; perimeter
G1 X76.630 Y86.709 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.12383 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X83.307 Y78.752 E0.12383 ; perimeter
G1 X83.651 Y78.342 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.12383 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.728 Y87.168 E0.12383 ; perimeter
G1 X76.581 Y86.150 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.12383 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.748 Y78.801 E0.12383 ; perimeter
G1 X83.602 Y77.784 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.12383 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.349 Y78.342 E0.12383 ; perimeter
G1 X166.693 Y78.752 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.12383 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.370 Y86.709 E0.12383 ; perimeter
G1 X173.714 Y87.119 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.12383 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X166.398 Y77.784 E0.12383 ; perimeter
G1 X167.105 Y78.625 E0.04528 ; perimeter
G1 X167.252 Y78.801 E0.00943 ; perimeter
G1 X164.949 Y80.733 E0.12383 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X173.419 Y86.150 E0.12383 ; perimeter
G1 X174.272 Y87.168 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.12383 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X151.013 Y81.038 ; move to first perimeter point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y76.642 E0.18106 ; perimeter
G1 X152.153 Y76.642 E0.04695 ; perimeter
G1 X152.153 Y81.038 E0.18106 ; perimeter
G1 X151.073 Y81.038 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.617 Y76.246 E0.21372 ; perimeter
G1 X152.549 Y76.246 E0.07960 ; perimeter
G1 X152.549 Y80.899 E0.19166 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X184.771 Y59.569 E0.89832 ; perimeter
G1 X185.288 Y59.198 E0.02623 ; perimeter
G1 X185.602 Y59.018 E0.01489 ; perimeter
G1 X186.037 Y58.829 E0.01954 ; perimeter
G1 X186.477 Y58.699 E0.01891 ; perimeter
G1 X186.906 Y58.628 E0.01792 ; perimeter
G1 X187.493 Y58.621 E0.02415 ; perimeter
G1 X187.891 Y58.683 E0.01663 ; perimeter
G1 X188.246 Y58.793 E0.01529 ; perimeter
G1 X188.585 Y58.960 E0.01557 ; perimeter
G1 X188.860 Y59.157 E0.01395 ; perimeter
G1 X188.302 Y59.626 E0.03004 ; perimeter
G1 X188.088 Y59.493 E0.01039 ; perimeter
G1 X187.670 Y59.338 E0.01834 ; perimeter
G1 X187.228 Y59.264 E0.01847 ; perimeter
G1 X186.775 Y59.269 E0.01864 ; perimeter
G1 X186.325 Y59.350 E0.01884 ; perimeter
G1 X185.889 Y59.501 E0.01903 ; perimeter
G1 X185.479 Y59.715 E0.01903 ; perimeter
G1 X185.197 Y59.915 E0.01424 ; perimeter
G1 X168.261 Y74.121 E0.91063 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X150.677 Y81.434 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X150.220 Y75.850 E0.24637 ; perimeter
G1 X152.945 Y75.850 E0.11226 ; perimeter
G1 X152.945 Y80.502 E0.19166 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X184.528 Y59.255 E0.89301 ; perimeter
G1 X185.074 Y58.864 E0.02766 ; perimeter
G1 X185.424 Y58.663 E0.01663 ; perimeter
G1 X185.901 Y58.456 E0.02145 ; perimeter
G1 X186.388 Y58.312 E0.02091 ; perimeter
G1 X186.872 Y58.232 E0.02019 ; perimeter
G1 X187.521 Y58.225 E0.02674 ; perimeter
G1 X187.978 Y58.295 E0.01904 ; perimeter
G1 X188.244 Y58.373 E0.01145 ; perimeter
G1 X188.399 Y58.426 E0.00673 ; perimeter
G1 X188.789 Y58.619 E0.01795 ; perimeter
G1 X189.133 Y58.865 E0.01741 ; perimeter
G1 X189.446 Y59.183 E0.01839 ; perimeter
G1 X188.314 Y60.133 E0.06089 ; perimeter
G1 X188.219 Y60.041 E0.00544 ; perimeter
G1 X187.912 Y59.850 E0.01489 ; perimeter
G1 X187.568 Y59.723 E0.01513 ; perimeter
G1 X187.198 Y59.661 E0.01546 ; perimeter
G1 X186.813 Y59.665 E0.01584 ; perimeter
G1 X186.426 Y59.735 E0.01621 ; perimeter
G1 X186.046 Y59.866 E0.01654 ; perimeter
G1 X185.687 Y60.054 E0.01672 ; perimeter
G1 X185.439 Y60.229 E0.01248 ; perimeter
G1 X168.405 Y74.517 E0.91590 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X150.280 Y81.830 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.359 Y81.455 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.247 Y78.539 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X152.038 Y80.908 ; move to first infill point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7888.04
G1 X151.329 Y80.200 E0.04753 ; infill
G1 X151.329 Y79.554 E0.03062 ; infill
G1 X151.837 Y80.062 E0.03405 ; infill
G1 X151.837 Y79.417 E0.03062 ; infill
G1 X151.329 Y78.909 E0.03405 ; infill
G1 X151.329 Y78.264 E0.03062 ; infill
G1 X151.837 Y78.771 E0.03405 ; infill
G1 X151.837 Y78.126 E0.03062 ; infill
G1 X151.329 Y77.618 E0.03405 ; infill
G1 X151.329 Y76.973 E0.03062 ; infill
G1 X152.038 Y77.681 E0.04753 ; infill
G1 F8640
G1 X151.329 Y76.973 E-0.23134 ; wipe and retract
G1 X151.329 Y77.618 E-0.14903 ; wipe and retract
G1 X151.837 Y78.126 E-0.16575 ; wipe and retract
G1 X151.837 Y78.771 E-0.14903 ; wipe and retract
G1 X151.638 Y78.573 E-0.06484 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X193.307 Y70.678 ; move to first perimeter point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X192.963 Y70.268 E0.02205 ; perimeter
G1 X195.547 Y68.100 E0.13893 ; perimeter
G1 X192.136 Y64.035 E0.21861 ; perimeter
G1 X189.552 Y66.203 E0.13893 ; perimeter
G1 X189.208 Y65.793 E0.02205 ; perimeter
G1 X191.791 Y63.625 E0.13893 ; perimeter
G1 X189.342 Y60.706 E0.15696 ; perimeter
G1 X189.850 Y60.280 E0.02729 ; perimeter
G1 X198.847 Y71.003 E0.57663 ; perimeter
G1 X198.340 Y71.429 E0.02729 ; perimeter
G1 X195.891 Y68.510 E0.15696 ; perimeter
G1 X193.353 Y70.639 E0.13646 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.258 Y71.236 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X192.405 Y70.219 E0.05471 ; perimeter
G1 X194.988 Y68.051 E0.13893 ; perimeter
G1 X192.087 Y64.593 E0.18596 ; perimeter
G1 X189.503 Y66.761 E0.13893 ; perimeter
G1 X188.650 Y65.744 E0.05471 ; perimeter
G1 X191.233 Y63.576 E0.13893 ; perimeter
G1 X188.784 Y60.657 E0.15696 ; perimeter
G1 X189.899 Y59.722 E0.05995 ; perimeter
G1 X199.406 Y71.052 E0.60929 ; perimeter
G1 X198.291 Y71.987 E0.05995 ; perimeter
G1 X195.842 Y69.069 E0.15696 ; perimeter
G1 X193.304 Y71.198 E0.13646 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.301 Y70.839 F10800.000 ; move inwards before travel
G1 F8640
G1 X192.405 Y70.219 E-0.30695 ; wipe and retract
G1 X193.908 Y68.958 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
M73 Q67 S45
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X150.509 Y100.738 ; move to first perimeter point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.512 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E0.88148 ; perimeter
G1 X199.466 Y77.080 E1.48193 ; perimeter
G1 X199.786 Y76.770 E0.01834 ; perimeter
G1 X200.070 Y76.401 E0.01918 ; perimeter
G1 X200.294 Y75.998 E0.01903 ; perimeter
G1 X200.452 Y75.568 E0.01884 ; perimeter
G1 X200.536 Y75.124 E0.01864 ; perimeter
G1 X200.540 Y74.675 E0.01847 ; perimeter
G1 X200.460 Y74.237 E0.01834 ; perimeter
G1 X200.296 Y73.830 E0.01810 ; perimeter
G1 X200.107 Y73.541 E0.01421 ; perimeter
G1 X199.301 Y72.576 E0.05180 ; perimeter
G1 X199.809 Y72.150 E0.02735 ; perimeter
G1 X200.699 Y73.210 E0.05703 ; perimeter
G1 X200.916 Y73.518 E0.01553 ; perimeter
G1 X201.071 Y73.840 E0.01471 ; perimeter
G1 X201.174 Y74.194 E0.01520 ; perimeter
G1 X201.225 Y74.588 E0.01634 ; perimeter
G1 X201.216 Y74.975 E0.01596 ; perimeter
G1 X201.146 Y75.396 E0.01758 ; perimeter
G1 X200.959 Y75.967 E0.02476 ; perimeter
G1 X200.756 Y76.374 E0.01871 ; perimeter
G1 X200.573 Y76.655 E0.01384 ; perimeter
G1 X200.180 Y77.142 E0.02576 ; perimeter
G1 X199.814 Y77.487 E0.02073 ; perimeter
G1 X172.104 Y100.738 E1.49015 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X150.569 Y100.738 E0.60886 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.111 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X150.117 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E0.89179 ; perimeter
G1 X199.200 Y76.785 E1.47540 ; perimeter
G1 X199.489 Y76.505 E0.01657 ; perimeter
G1 X199.738 Y76.183 E0.01678 ; perimeter
G1 X199.933 Y75.832 E0.01654 ; perimeter
G1 X200.068 Y75.463 E0.01621 ; perimeter
G1 X200.140 Y75.085 E0.01584 ; perimeter
G1 X200.143 Y74.709 E0.01546 ; perimeter
G1 X200.077 Y74.348 E0.01513 ; perimeter
G1 X199.943 Y74.014 E0.01483 ; perimeter
G1 X199.788 Y73.778 E0.01164 ; perimeter
G1 X198.743 Y72.527 E0.06714 ; perimeter
G1 X199.858 Y71.591 E0.05997 ; perimeter
G1 X201.014 Y72.968 E0.07405 ; perimeter
G1 X201.260 Y73.317 E0.01758 ; perimeter
G1 X201.442 Y73.698 E0.01741 ; perimeter
G1 X201.563 Y74.113 E0.01782 ; perimeter
G1 X201.621 Y74.560 E0.01855 ; perimeter
G1 X201.610 Y75.016 E0.01880 ; perimeter
G1 X201.532 Y75.491 E0.01982 ; perimeter
G1 X201.326 Y76.118 E0.02721 ; perimeter
G1 X201.101 Y76.571 E0.02083 ; perimeter
G1 X200.894 Y76.889 E0.01561 ; perimeter
G1 X200.471 Y77.412 E0.02771 ; perimeter
G1 X200.077 Y77.783 E0.02230 ; perimeter
G1 X172.248 Y101.134 E1.49656 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X150.171 Y101.134 E0.60894 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.322 Y100.794 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.117 Y99.806 E-0.30689 ; wipe and retract
G1 X152.080 Y99.806 E-0.45311 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X165.860 Y101.722 ; move to first infill point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.069 Y101.931 E0.01484 ; infill
G1 X166.754 Y101.931 E0.03448 ; infill
G1 X166.061 Y101.238 E0.04930 ; infill
G1 X166.061 Y100.915 E0.01627 ; infill
G1 X166.423 Y100.915 E0.01821 ; infill
G1 X167.439 Y101.931 E0.07230 ; infill
G1 X168.124 Y101.931 E0.03448 ; infill
G1 X167.108 Y100.915 E0.07230 ; infill
G1 X167.793 Y100.915 E0.03448 ; infill
G1 X168.808 Y101.931 E0.07230 ; infill
G1 X169.493 Y101.931 E0.03448 ; infill
G1 X168.478 Y100.915 E0.07230 ; infill
G1 X169.163 Y100.915 E0.03448 ; infill
G1 X169.945 Y101.697 E0.05567 ; infill
G1 F8640
G1 X169.163 Y100.915 E-0.25535 ; wipe and retract
G1 X168.478 Y100.915 E-0.15815 ; wipe and retract
G1 X169.493 Y101.931 E-0.33164 ; wipe and retract
G1 X169.429 Y101.931 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X99.206 Y138.884 ; move to first perimeter point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.61134 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X49.901 Y115.633 E1.49015 ; perimeter
G1 X49.530 Y115.284 E0.02099 ; perimeter
G1 X49.218 Y114.913 E0.01995 ; perimeter
G1 X48.958 Y114.518 E0.01950 ; perimeter
G1 X48.753 Y114.107 E0.01891 ; perimeter
G1 X48.606 Y113.690 E0.01822 ; perimeter
G1 X48.518 Y113.276 E0.01745 ; perimeter
G1 X48.490 Y112.872 E0.01667 ; perimeter
G1 X48.539 Y112.345 E0.02181 ; perimeter
G1 X48.641 Y111.992 E0.01513 ; perimeter
G1 X48.799 Y111.663 E0.01506 ; perimeter
G1 X48.960 Y111.431 E0.01160 ; perimeter
G1 X49.907 Y110.297 E0.06087 ; perimeter
G1 X50.413 Y110.722 E0.02723 ; perimeter
G1 X49.648 Y111.633 E0.04901 ; perimeter
G1 X49.420 Y111.972 E0.01685 ; perimeter
G1 X49.255 Y112.384 E0.01826 ; perimeter
G1 X49.175 Y112.821 E0.01834 ; perimeter
G1 X49.179 Y113.270 E0.01847 ; perimeter
G1 X49.263 Y113.715 E0.01864 ; perimeter
G1 X49.421 Y114.144 E0.01884 ; perimeter
G1 X49.645 Y114.547 E0.01903 ; perimeter
G1 X49.929 Y114.916 E0.01917 ; perimeter
G1 X50.249 Y115.226 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.48193 ; perimeter
G1 X99.203 Y138.349 E0.88148 ; perimeter
G1 X99.205 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.604 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.61141 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03672 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X49.638 Y115.929 E1.49656 ; perimeter
G1 X49.242 Y115.556 E0.02240 ; perimeter
G1 X48.900 Y115.151 E0.02185 ; perimeter
G1 X48.614 Y114.716 E0.02143 ; perimeter
G1 X48.387 Y114.262 E0.02091 ; perimeter
G1 X48.224 Y113.798 E0.02030 ; perimeter
G1 X48.125 Y113.331 E0.01964 ; perimeter
G1 X48.092 Y112.872 E0.01898 ; perimeter
G1 X48.151 Y112.261 E0.02528 ; perimeter
G1 X48.272 Y111.846 E0.01779 ; perimeter
G1 X48.456 Y111.462 E0.01754 ; perimeter
G1 X48.644 Y111.191 E0.01363 ; perimeter
G1 X49.857 Y109.738 E0.07797 ; perimeter
G1 X50.971 Y110.673 E0.05993 ; perimeter
G1 X49.965 Y111.872 E0.06447 ; perimeter
G1 X49.772 Y112.159 E0.01426 ; perimeter
G1 X49.638 Y112.494 E0.01489 ; perimeter
G1 X49.572 Y112.856 E0.01513 ; perimeter
G1 X49.575 Y113.231 E0.01546 ; perimeter
G1 X49.646 Y113.609 E0.01584 ; perimeter
G1 X49.782 Y113.978 E0.01621 ; perimeter
G1 X49.977 Y114.329 E0.01654 ; perimeter
G1 X50.226 Y114.651 E0.01678 ; perimeter
G1 X50.515 Y114.931 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.47540 ; perimeter
G1 X99.598 Y137.952 E0.89179 ; perimeter
G1 X99.604 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.204 Y139.272 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.312 Y139.234 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X83.854 Y139.843 ; move to first infill point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.15
G1 X83.072 Y139.061 E0.05567 ; infill
G1 X82.388 Y139.061 E0.03448 ; infill
G1 X83.403 Y140.077 E0.07230 ; infill
G1 X82.718 Y140.077 E0.03448 ; infill
G1 X81.703 Y139.061 E0.07230 ; infill
G1 X81.018 Y139.061 E0.03448 ; infill
G1 X82.033 Y140.077 E0.07230 ; infill
G1 X81.348 Y140.077 E0.03448 ; infill
G1 X80.333 Y139.061 E0.07230 ; infill
G1 X79.971 Y139.061 E0.01821 ; infill
G1 X79.971 Y139.384 E0.01627 ; infill
G1 X80.663 Y140.077 E0.04930 ; infill
G1 X79.979 Y140.077 E0.03448 ; infill
G1 X79.770 Y139.868 E0.01483 ; infill
G1 F8640
G1 X79.979 Y140.077 E-0.06805 ; wipe and retract
G1 X80.663 Y140.077 E-0.15815 ; wipe and retract
G1 X79.971 Y139.384 E-0.22612 ; wipe and retract
G1 X79.971 Y139.061 E-0.07462 ; wipe and retract
G1 X80.333 Y139.061 E-0.08353 ; wipe and retract
G1 X80.791 Y139.519 E-0.14953 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X56.408 Y108.824 ; move to first perimeter point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X53.824 Y106.656 E0.13893 ; perimeter
G1 X51.375 Y109.575 E0.15696 ; perimeter
G1 X50.868 Y109.149 E0.02729 ; perimeter
G1 X59.865 Y98.427 E0.57663 ; perimeter
G1 X60.372 Y98.852 E0.02729 ; perimeter
G1 X57.923 Y101.771 E0.15696 ; perimeter
G1 X60.507 Y103.939 E0.13893 ; perimeter
G1 X60.163 Y104.349 E0.02205 ; perimeter
G1 X57.579 Y102.181 E0.13893 ; perimeter
G1 X54.168 Y106.246 E0.21861 ; perimeter
G1 X56.752 Y108.414 E0.13893 ; perimeter
G1 X56.446 Y108.778 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.456 Y109.383 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X53.873 Y107.215 E0.13893 ; perimeter
G1 X51.424 Y110.133 E0.15696 ; perimeter
G1 X50.309 Y109.198 E0.05995 ; perimeter
G1 X59.816 Y97.868 E0.60929 ; perimeter
G1 X60.931 Y98.804 E0.05995 ; perimeter
G1 X58.482 Y101.722 E0.15696 ; perimeter
G1 X61.065 Y103.890 E0.13893 ; perimeter
G1 X60.212 Y104.907 E0.05471 ; perimeter
G1 X57.628 Y102.740 E0.13893 ; perimeter
G1 X54.727 Y106.197 E0.18596 ; perimeter
G1 X57.310 Y108.365 E0.13893 ; perimeter
G1 X56.495 Y109.337 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.184 Y109.089 F10800.000 ; move inwards before travel
G1 F8640
G1 X53.936 Y107.266 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X98.702 Y119.184 ; move to first perimeter point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.04695 ; perimeter
G1 X97.562 Y114.789 E0.18106 ; perimeter
G1 X98.702 Y114.789 E0.04695 ; perimeter
G1 X98.702 Y119.124 E0.17859 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.15621 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X64.599 Y98.124 E0.90640 ; perimeter
G1 X64.238 Y97.863 E0.01834 ; perimeter
G1 X63.826 Y97.647 E0.01917 ; perimeter
G1 X63.390 Y97.496 E0.01903 ; perimeter
G1 X62.939 Y97.416 E0.01884 ; perimeter
G1 X62.487 Y97.410 E0.01864 ; perimeter
G1 X62.045 Y97.484 E0.01847 ; perimeter
G1 X61.627 Y97.639 E0.01834 ; perimeter
G1 X61.413 Y97.772 E0.01039 ; perimeter
G1 X60.855 Y97.303 E0.03004 ; perimeter
G1 X61.130 Y97.106 E0.01395 ; perimeter
G1 X61.461 Y96.943 E0.01520 ; perimeter
G1 X61.840 Y96.825 E0.01634 ; perimeter
G1 X62.223 Y96.767 E0.01596 ; perimeter
G1 X62.649 Y96.762 E0.01758 ; perimeter
G1 X63.244 Y96.847 E0.02476 ; perimeter
G1 X63.678 Y96.976 E0.01862 ; perimeter
G1 X64.113 Y97.164 E0.01954 ; perimeter
G1 X64.426 Y97.344 E0.01489 ; perimeter
G1 X64.944 Y97.715 E0.02623 ; perimeter
G1 X81.649 Y111.732 E0.89832 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y114.392 E0.19166 ; perimeter
G1 X99.098 Y114.392 E0.07960 ; perimeter
G1 X99.098 Y119.520 E0.21125 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.17848 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X64.355 Y98.437 E0.91176 ; perimeter
G1 X64.029 Y98.201 E0.01657 ; perimeter
G1 X63.668 Y98.012 E0.01678 ; perimeter
G1 X63.289 Y97.881 E0.01654 ; perimeter
G1 X62.902 Y97.812 E0.01621 ; perimeter
G1 X62.517 Y97.807 E0.01584 ; perimeter
G1 X62.147 Y97.869 E0.01546 ; perimeter
G1 X61.803 Y97.997 E0.01513 ; perimeter
G1 X61.496 Y98.187 E0.01489 ; perimeter
G1 X61.401 Y98.279 E0.00544 ; perimeter
G1 X60.268 Y97.329 E0.06089 ; perimeter
G1 X60.582 Y97.011 E0.01838 ; perimeter
G1 X60.925 Y96.765 E0.01741 ; perimeter
G1 X61.313 Y96.574 E0.01782 ; perimeter
G1 X61.743 Y96.440 E0.01855 ; perimeter
G1 X62.194 Y96.371 E0.01880 ; perimeter
G1 X62.675 Y96.365 E0.01982 ; perimeter
G1 X63.329 Y96.459 E0.02721 ; perimeter
G1 X63.813 Y96.602 E0.02080 ; perimeter
G1 X64.291 Y96.809 E0.02145 ; perimeter
G1 X64.641 Y97.011 E0.01663 ; perimeter
G1 X65.187 Y97.402 E0.02766 ; perimeter
G1 X81.793 Y111.335 E0.89301 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y113.996 E0.19166 ; perimeter
G1 X99.494 Y113.996 E0.11226 ; perimeter
G1 X99.494 Y119.916 E0.24390 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.123 Y119.828 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.203 Y119.962 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X98.587 Y119.054 ; move to first infill point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7888.04
G1 X97.878 Y118.346 E0.04753 ; infill
G1 X97.878 Y117.701 E0.03062 ; infill
G1 X98.386 Y118.208 E0.03405 ; infill
G1 X98.386 Y117.563 E0.03062 ; infill
G1 X97.878 Y117.055 E0.03405 ; infill
G1 X97.878 Y116.410 E0.03062 ; infill
G1 X98.386 Y116.917 E0.03405 ; infill
G1 X98.386 Y116.272 E0.03062 ; infill
G1 X97.878 Y115.764 E0.03405 ; infill
G1 X97.878 Y115.119 E0.03062 ; infill
G1 X98.587 Y115.827 E0.04753 ; infill
G1 F8640
G1 X97.878 Y115.119 E-0.23134 ; wipe and retract
G1 X97.878 Y115.764 E-0.14903 ; wipe and retract
G1 X98.386 Y116.272 E-0.16575 ; wipe and retract
G1 X98.386 Y116.917 E-0.14903 ; wipe and retract
G1 X98.187 Y116.719 E-0.06484 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X76.001 Y125.265 E0.12383 ; perimeter
M73 P68 R43
G1 X76.345 Y124.855 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.12383 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X83.021 Y116.898 E0.12383 ; perimeter
G1 X83.365 Y116.488 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.12383 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.442 Y125.314 E0.12383 ; perimeter
G1 X76.296 Y124.296 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.12383 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X82.463 Y116.947 E0.12383 ; perimeter
G1 X83.317 Y115.930 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.12383 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.064 Y116.488 E0.12383 ; perimeter
G1 X166.408 Y116.898 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.12383 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.085 Y124.855 E0.12383 ; perimeter
G1 X173.429 Y125.265 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.12383 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.113 Y115.930 E0.12383 ; perimeter
G1 X166.820 Y116.772 E0.04528 ; perimeter
G1 X166.967 Y116.947 E0.00943 ; perimeter
G1 X164.664 Y118.879 E0.12383 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.134 Y124.296 E0.12383 ; perimeter
G1 X173.987 Y125.314 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.12383 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X150.728 Y119.184 ; move to first perimeter point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y114.789 E0.18106 ; perimeter
G1 X151.868 Y114.789 E0.04695 ; perimeter
G1 X151.868 Y119.184 E0.18106 ; perimeter
G1 X150.788 Y119.184 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.332 Y114.392 E0.21372 ; perimeter
G1 X152.264 Y114.392 E0.07960 ; perimeter
G1 X152.264 Y119.045 E0.19166 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X184.486 Y97.715 E0.89832 ; perimeter
G1 X185.003 Y97.344 E0.02623 ; perimeter
G1 X185.317 Y97.164 E0.01489 ; perimeter
G1 X185.752 Y96.976 E0.01954 ; perimeter
G1 X186.192 Y96.845 E0.01891 ; perimeter
G1 X186.621 Y96.774 E0.01792 ; perimeter
G1 X187.207 Y96.768 E0.02415 ; perimeter
G1 X187.606 Y96.829 E0.01663 ; perimeter
G1 X187.961 Y96.939 E0.01529 ; perimeter
G1 X188.300 Y97.106 E0.01557 ; perimeter
G1 X188.575 Y97.303 E0.01395 ; perimeter
G1 X188.016 Y97.772 E0.03004 ; perimeter
G1 X187.802 Y97.639 E0.01039 ; perimeter
G1 X187.385 Y97.484 E0.01834 ; perimeter
G1 X186.943 Y97.410 E0.01847 ; perimeter
G1 X186.490 Y97.416 E0.01864 ; perimeter
G1 X186.040 Y97.496 E0.01884 ; perimeter
G1 X185.604 Y97.647 E0.01903 ; perimeter
G1 X185.194 Y97.862 E0.01903 ; perimeter
G1 X184.912 Y98.061 E0.01424 ; perimeter
G1 X167.976 Y112.267 E0.91063 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X150.392 Y119.580 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.935 Y113.996 E0.24637 ; perimeter
G1 X152.660 Y113.996 E0.11226 ; perimeter
G1 X152.660 Y118.648 E0.19166 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X184.242 Y97.402 E0.89301 ; perimeter
G1 X184.788 Y97.011 E0.02766 ; perimeter
G1 X185.138 Y96.809 E0.01663 ; perimeter
G1 X185.616 Y96.602 E0.02145 ; perimeter
G1 X186.103 Y96.458 E0.02091 ; perimeter
G1 X186.586 Y96.378 E0.02019 ; perimeter
G1 X187.235 Y96.371 E0.02674 ; perimeter
G1 X187.692 Y96.441 E0.01904 ; perimeter
G1 X187.959 Y96.519 E0.01145 ; perimeter
G1 X188.114 Y96.572 E0.00673 ; perimeter
G1 X188.504 Y96.765 E0.01795 ; perimeter
G1 X188.848 Y97.011 E0.01741 ; perimeter
G1 X189.161 Y97.329 E0.01839 ; perimeter
G1 X188.029 Y98.279 E0.06089 ; perimeter
G1 X187.934 Y98.187 E0.00544 ; perimeter
G1 X187.627 Y97.997 E0.01489 ; perimeter
G1 X187.283 Y97.869 E0.01513 ; perimeter
G1 X186.912 Y97.807 E0.01546 ; perimeter
G1 X186.528 Y97.812 E0.01584 ; perimeter
G1 X186.141 Y97.881 E0.01621 ; perimeter
G1 X185.761 Y98.012 E0.01654 ; perimeter
G1 X185.401 Y98.200 E0.01672 ; perimeter
G1 X185.154 Y98.375 E0.01248 ; perimeter
G1 X168.120 Y112.663 E0.91590 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X149.995 Y119.976 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.074 Y119.601 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.962 Y116.685 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X151.752 Y119.054 ; move to first infill point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7888.04
G1 X151.044 Y118.346 E0.04753 ; infill
G1 X151.044 Y117.701 E0.03062 ; infill
G1 X151.552 Y118.208 E0.03405 ; infill
G1 X151.552 Y117.563 E0.03062 ; infill
G1 X151.044 Y117.055 E0.03405 ; infill
G1 X151.044 Y116.410 E0.03062 ; infill
G1 X151.552 Y116.917 E0.03405 ; infill
G1 X151.552 Y116.272 E0.03062 ; infill
G1 X151.044 Y115.764 E0.03405 ; infill
G1 X151.044 Y115.119 E0.03062 ; infill
G1 X151.752 Y115.827 E0.04753 ; infill
G1 F8640
G1 X151.044 Y115.119 E-0.23134 ; wipe and retract
G1 X151.044 Y115.764 E-0.14903 ; wipe and retract
G1 X151.552 Y116.272 E-0.16575 ; wipe and retract
G1 X151.552 Y116.917 E-0.14903 ; wipe and retract
G1 X151.353 Y116.719 E-0.06484 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X193.022 Y108.824 ; move to first perimeter point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X192.678 Y108.414 E0.02205 ; perimeter
G1 X195.261 Y106.246 E0.13893 ; perimeter
G1 X191.850 Y102.181 E0.21861 ; perimeter
G1 X189.267 Y104.349 E0.13893 ; perimeter
G1 X188.923 Y103.939 E0.02205 ; perimeter
G1 X191.506 Y101.771 E0.13893 ; perimeter
G1 X189.057 Y98.852 E0.15696 ; perimeter
G1 X189.565 Y98.427 E0.02729 ; perimeter
G1 X198.562 Y109.149 E0.57663 ; perimeter
G1 X198.055 Y109.575 E0.02729 ; perimeter
G1 X195.606 Y106.656 E0.15696 ; perimeter
G1 X193.068 Y108.786 E0.13646 ; perimeter
M204 S1000 ; adjust acceleration
G1 X192.973 Y109.383 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X192.120 Y108.365 E0.05471 ; perimeter
G1 X194.703 Y106.197 E0.13893 ; perimeter
G1 X191.802 Y102.740 E0.18596 ; perimeter
G1 X189.218 Y104.907 E0.13893 ; perimeter
G1 X188.364 Y103.890 E0.05471 ; perimeter
G1 X190.948 Y101.722 E0.13893 ; perimeter
G1 X188.499 Y98.804 E0.15696 ; perimeter
G1 X189.614 Y97.868 E0.05995 ; perimeter
G1 X199.121 Y109.198 E0.60929 ; perimeter
G1 X198.006 Y110.133 E0.05995 ; perimeter
G1 X195.557 Y107.215 E0.15696 ; perimeter
G1 X193.019 Y109.344 E0.13646 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.016 Y108.985 F10800.000 ; move inwards before travel
G1 F8640
G1 X192.120 Y108.365 E-0.30695 ; wipe and retract
G1 X193.623 Y107.104 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X150.224 Y138.884 ; move to first perimeter point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.226 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E0.88148 ; perimeter
G1 X199.181 Y115.226 E1.48193 ; perimeter
G1 X199.500 Y114.916 E0.01834 ; perimeter
G1 X199.784 Y114.547 E0.01918 ; perimeter
G1 X200.009 Y114.144 E0.01903 ; perimeter
G1 X200.167 Y113.715 E0.01884 ; perimeter
G1 X200.251 Y113.270 E0.01864 ; perimeter
G1 X200.255 Y112.821 E0.01847 ; perimeter
G1 X200.175 Y112.384 E0.01834 ; perimeter
G1 X200.011 Y111.976 E0.01810 ; perimeter
G1 X199.822 Y111.687 E0.01421 ; perimeter
G1 X199.016 Y110.722 E0.05180 ; perimeter
G1 X199.524 Y110.296 E0.02735 ; perimeter
G1 X200.414 Y111.356 E0.05703 ; perimeter
G1 X200.631 Y111.664 E0.01553 ; perimeter
G1 X200.786 Y111.986 E0.01471 ; perimeter
G1 X200.889 Y112.341 E0.01520 ; perimeter
G1 X200.940 Y112.734 E0.01634 ; perimeter
G1 X200.930 Y113.121 E0.01596 ; perimeter
G1 X200.861 Y113.542 E0.01758 ; perimeter
G1 X200.674 Y114.114 E0.02476 ; perimeter
G1 X200.471 Y114.520 E0.01871 ; perimeter
G1 X200.288 Y114.802 E0.01384 ; perimeter
G1 X199.895 Y115.288 E0.02576 ; perimeter
G1 X199.528 Y115.633 E0.02073 ; perimeter
G1 X171.819 Y138.884 E1.49015 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X150.284 Y138.884 E0.60886 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.826 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.832 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E0.89179 ; perimeter
G1 X198.915 Y114.931 E1.47540 ; perimeter
G1 X199.204 Y114.651 E0.01657 ; perimeter
G1 X199.452 Y114.329 E0.01678 ; perimeter
G1 X199.648 Y113.978 E0.01654 ; perimeter
G1 X199.783 Y113.609 E0.01621 ; perimeter
G1 X199.855 Y113.231 E0.01584 ; perimeter
G1 X199.858 Y112.856 E0.01546 ; perimeter
G1 X199.792 Y112.494 E0.01513 ; perimeter
G1 X199.658 Y112.160 E0.01483 ; perimeter
G1 X199.503 Y111.924 E0.01164 ; perimeter
G1 X198.458 Y110.673 E0.06714 ; perimeter
G1 X199.573 Y109.737 E0.05997 ; perimeter
G1 X200.728 Y111.114 E0.07405 ; perimeter
G1 X200.974 Y111.463 E0.01758 ; perimeter
G1 X201.157 Y111.844 E0.01741 ; perimeter
G1 X201.278 Y112.259 E0.01782 ; perimeter
G1 X201.336 Y112.706 E0.01855 ; perimeter
G1 X201.325 Y113.162 E0.01880 ; perimeter
G1 X201.247 Y113.637 E0.01982 ; perimeter
G1 X201.041 Y114.265 E0.02721 ; perimeter
G1 X200.815 Y114.717 E0.02083 ; perimeter
G1 X200.609 Y115.035 E0.01561 ; perimeter
G1 X200.186 Y115.558 E0.02771 ; perimeter
G1 X199.792 Y115.929 E0.02230 ; perimeter
G1 X171.963 Y139.280 E1.49656 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X149.886 Y139.280 E0.60894 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.037 Y138.941 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.832 Y137.952 E-0.30689 ; wipe and retract
G1 X151.794 Y137.952 E-0.45311 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
G1 X165.575 Y139.868 ; move to first infill point
G1 Z14.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.784 Y140.077 E0.01484 ; infill
G1 X166.469 Y140.077 E0.03448 ; infill
G1 X165.776 Y139.384 E0.04930 ; infill
G1 X165.776 Y139.061 E0.01627 ; infill
G1 X166.138 Y139.061 E0.01821 ; infill
G1 X167.153 Y140.077 E0.07230 ; infill
G1 X167.838 Y140.077 E0.03448 ; infill
G1 X166.823 Y139.061 E0.07230 ; infill
G1 X167.508 Y139.061 E0.03448 ; infill
G1 X168.523 Y140.077 E0.07230 ; infill
G1 X169.208 Y140.077 E0.03448 ; infill
G1 X168.193 Y139.061 E0.07230 ; infill
G1 X168.878 Y139.061 E0.03448 ; infill
G1 X169.660 Y139.843 E0.05567 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;15


G1 F8640
G1 X168.878 Y139.061 E-0.25535 ; wipe and retract
G1 X168.193 Y139.061 E-0.15815 ; wipe and retract
G1 X169.208 Y140.077 E-0.33164 ; wipe and retract
G1 X169.144 Y140.077 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;15
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X99.192 Y100.738 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.59903 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X50.052 Y77.374 E1.49736 ; perimeter
G1 X49.683 Y77.026 E0.02092 ; perimeter
G1 X49.371 Y76.657 E0.01990 ; perimeter
G1 X49.111 Y76.263 E0.01945 ; perimeter
G1 X48.906 Y75.853 E0.01886 ; perimeter
G1 X48.759 Y75.438 E0.01818 ; perimeter
G1 X48.671 Y75.024 E0.01742 ; perimeter
G1 X48.641 Y74.621 E0.01664 ; perimeter
G1 X48.691 Y74.083 E0.02228 ; perimeter
G1 X48.793 Y73.731 E0.01507 ; perimeter
G1 X48.951 Y73.403 E0.01500 ; perimeter
G1 X49.114 Y73.169 E0.01177 ; perimeter
G1 X50.058 Y72.038 E0.06067 ; perimeter
G1 X50.564 Y72.463 E0.02723 ; perimeter
G1 X49.799 Y73.374 E0.04901 ; perimeter
G1 X49.571 Y73.714 E0.01685 ; perimeter
G1 X49.406 Y74.125 E0.01826 ; perimeter
G1 X49.326 Y74.563 E0.01834 ; perimeter
G1 X49.330 Y75.011 E0.01847 ; perimeter
G1 X49.414 Y75.456 E0.01864 ; perimeter
G1 X49.555 Y75.839 E0.01682 ; perimeter
G1 X49.793 Y76.285 E0.02082 ; perimeter
G1 X50.080 Y76.657 E0.01939 ; perimeter
G1 X50.400 Y76.967 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.48914 ; perimeter
G1 X99.192 Y100.203 E0.86928 ; perimeter
G1 X99.192 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.588 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.59903 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03672 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X49.789 Y77.671 E1.50377 ; perimeter
G1 X49.394 Y77.299 E0.02233 ; perimeter
G1 X49.053 Y76.895 E0.02179 ; perimeter
G1 X48.767 Y76.462 E0.02138 ; perimeter
G1 X48.541 Y76.009 E0.02086 ; perimeter
G1 X48.377 Y75.545 E0.02025 ; perimeter
G1 X48.277 Y75.080 E0.01960 ; perimeter
G1 X48.244 Y74.622 E0.01894 ; perimeter
G1 X48.303 Y73.998 E0.02579 ; perimeter
G1 X48.424 Y73.585 E0.01773 ; perimeter
G1 X48.607 Y73.203 E0.01748 ; perimeter
G1 X48.799 Y72.928 E0.01380 ; perimeter
G1 X50.008 Y71.479 E0.07775 ; perimeter
G1 X51.122 Y72.414 E0.05993 ; perimeter
G1 X50.117 Y73.613 E0.06447 ; perimeter
G1 X49.923 Y73.900 E0.01426 ; perimeter
G1 X49.789 Y74.236 E0.01489 ; perimeter
G1 X49.723 Y74.597 E0.01513 ; perimeter
G1 X49.726 Y74.972 E0.01546 ; perimeter
G1 X49.797 Y75.350 E0.01584 ; perimeter
G1 X49.917 Y75.676 E0.01432 ; perimeter
G1 X50.127 Y76.069 E0.01833 ; perimeter
G1 X50.377 Y76.393 E0.01685 ; perimeter
G1 X50.666 Y76.673 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.48261 ; perimeter
G1 X99.588 Y99.806 E0.87966 ; perimeter
G1 X99.588 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.189 Y101.126 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.297 Y101.088 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X83.730 Y102.131 ; move to first infill point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.939 Y101.923 E0.01484 ; infill
G1 X83.939 Y101.238 E0.03448 ; infill
G1 X83.246 Y101.931 E0.04931 ; infill
G1 X82.561 Y101.931 E0.03448 ; infill
G1 X83.577 Y100.915 E0.07230 ; infill
G1 X82.892 Y100.915 E0.03448 ; infill
G1 X81.876 Y101.931 E0.07230 ; infill
G1 X81.191 Y101.931 E0.03448 ; infill
G1 X82.207 Y100.915 E0.07230 ; infill
G1 X81.522 Y100.915 E0.03448 ; infill
G1 X80.506 Y101.931 E0.07230 ; infill
G1 X80.256 Y101.931 E0.01260 ; infill
G1 X80.256 Y101.496 E0.02188 ; infill
G1 X81.038 Y100.714 E0.05566 ; infill
G1 F8640
G1 X80.256 Y101.496 E-0.25531 ; wipe and retract
G1 X80.256 Y101.931 E-0.10036 ; wipe and retract
G1 X80.506 Y101.931 E-0.05779 ; wipe and retract
G1 X81.522 Y100.915 E-0.33164 ; wipe and retract
G1 X81.587 Y100.915 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X56.554 Y70.561 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q68 S44
M204 S800 ; adjust acceleration
G1 F4800
G1 X53.975 Y68.398 E0.13866 ; perimeter
G1 X51.526 Y71.316 E0.15696 ; perimeter
G1 X51.019 Y70.890 E0.02729 ; perimeter
G1 X60.016 Y60.168 E0.57663 ; perimeter
G1 X60.523 Y60.594 E0.02729 ; perimeter
G1 X58.074 Y63.512 E0.15696 ; perimeter
G1 X60.653 Y65.676 E0.13866 ; perimeter
G1 X60.309 Y66.086 E0.02205 ; perimeter
G1 X57.730 Y63.922 E0.13866 ; perimeter
G1 X54.319 Y67.988 E0.21861 ; perimeter
G1 X56.898 Y70.151 E0.13866 ; perimeter
G1 X56.592 Y70.515 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.602 Y71.120 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X54.024 Y68.956 E0.13866 ; perimeter
G1 X51.575 Y71.875 E0.15696 ; perimeter
G1 X50.460 Y70.939 E0.05995 ; perimeter
G1 X59.967 Y59.609 E0.60929 ; perimeter
G1 X61.082 Y60.545 E0.05995 ; perimeter
G1 X58.633 Y63.464 E0.15696 ; perimeter
G1 X61.211 Y65.627 E0.13866 ; perimeter
G1 X60.358 Y66.644 E0.05471 ; perimeter
G1 X57.779 Y64.481 E0.13866 ; perimeter
G1 X54.878 Y67.939 E0.18596 ; perimeter
G1 X57.456 Y70.102 E0.13866 ; perimeter
G1 X56.641 Y71.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.331 Y70.826 F10800.000 ; move inwards before travel
G1 F8640
G1 X54.082 Y69.003 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X98.987 Y81.038 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.04695 ; perimeter
G1 X97.847 Y76.467 E0.18827 ; perimeter
G1 X98.987 Y76.467 E0.04695 ; perimeter
G1 X98.987 Y80.978 E0.18580 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.15621 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X64.750 Y59.866 E0.91361 ; perimeter
G1 X64.390 Y59.605 E0.01834 ; perimeter
G1 X63.977 Y59.389 E0.01917 ; perimeter
G1 X63.541 Y59.238 E0.01903 ; perimeter
G1 X63.090 Y59.157 E0.01884 ; perimeter
G1 X62.638 Y59.152 E0.01864 ; perimeter
G1 X62.196 Y59.225 E0.01847 ; perimeter
G1 X61.788 Y59.377 E0.01790 ; perimeter
G1 X61.565 Y59.514 E0.01080 ; perimeter
G1 X61.006 Y59.045 E0.03006 ; perimeter
G1 X61.279 Y58.849 E0.01387 ; perimeter
G1 X61.609 Y58.685 E0.01516 ; perimeter
G1 X61.986 Y58.567 E0.01627 ; perimeter
G1 X62.367 Y58.508 E0.01590 ; perimeter
G1 X62.813 Y58.503 E0.01837 ; perimeter
G1 X63.394 Y58.588 E0.02417 ; perimeter
G1 X63.833 Y58.718 E0.01886 ; perimeter
G1 X64.267 Y58.907 E0.01950 ; perimeter
G1 X64.564 Y59.078 E0.01411 ; perimeter
G1 X65.096 Y59.457 E0.02691 ; perimeter
G1 X81.934 Y73.586 E0.90551 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y76.071 E0.19888 ; perimeter
G1 X99.383 Y76.071 E0.07960 ; perimeter
G1 X99.383 Y81.374 E0.21846 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.17848 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X64.506 Y60.178 E0.91897 ; perimeter
G1 X64.180 Y59.942 E0.01657 ; perimeter
G1 X63.820 Y59.754 E0.01678 ; perimeter
G1 X63.440 Y59.622 E0.01654 ; perimeter
G1 X63.053 Y59.553 E0.01621 ; perimeter
G1 X62.668 Y59.548 E0.01584 ; perimeter
G1 X62.298 Y59.610 E0.01546 ; perimeter
G1 X61.963 Y59.735 E0.01474 ; perimeter
G1 X61.647 Y59.928 E0.01524 ; perimeter
G1 X61.552 Y60.020 E0.00547 ; perimeter
G1 X60.420 Y59.070 E0.06089 ; perimeter
G1 X60.732 Y58.753 E0.01834 ; perimeter
G1 X61.075 Y58.508 E0.01736 ; perimeter
G1 X61.461 Y58.316 E0.01776 ; perimeter
G1 X61.889 Y58.182 E0.01849 ; perimeter
G1 X62.339 Y58.112 E0.01874 ; perimeter
G1 X62.994 Y58.119 E0.02701 ; perimeter
G1 X63.483 Y58.201 E0.02043 ; perimeter
G1 X63.969 Y58.345 E0.02086 ; perimeter
G1 X64.445 Y58.552 E0.02140 ; perimeter
G1 X64.778 Y58.744 E0.01583 ; perimeter
G1 X65.338 Y59.143 E0.02835 ; perimeter
G1 X82.078 Y73.189 E0.90021 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y75.675 E0.19888 ; perimeter
G1 X99.780 Y75.675 E0.11226 ; perimeter
G1 X99.780 Y81.770 E0.25111 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.409 Y81.680 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.488 Y81.816 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X97.962 Y80.875 ; move to first infill point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7629.38
G1 X98.671 Y80.167 E0.04914 ; infill
G1 X98.671 Y79.500 E0.03273 ; infill
G1 X98.163 Y80.007 E0.03521 ; infill
G1 X98.163 Y79.340 E0.03273 ; infill
G1 X98.671 Y78.832 E0.03521 ; infill
G1 X98.671 Y78.165 E0.03273 ; infill
G1 X98.163 Y78.673 E0.03521 ; infill
G1 X98.163 Y78.005 E0.03273 ; infill
G1 X98.671 Y77.498 E0.03521 ; infill
G1 X98.671 Y76.830 E0.03273 ; infill
G1 X97.962 Y77.539 E0.04914 ; infill
G1 F8640
G1 X98.671 Y76.830 E-0.23134 ; wipe and retract
G1 X98.671 Y77.498 E-0.15408 ; wipe and retract
G1 X98.163 Y78.005 E-0.16575 ; wipe and retract
G1 X98.163 Y78.673 E-0.15408 ; wipe and retract
G1 X98.331 Y78.505 E-0.05473 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.348 Y87.171 E0.12048 ; perimeter
G1 X76.692 Y86.761 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.12048 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X83.369 Y78.804 E0.12048 ; perimeter
G1 X83.713 Y78.394 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.12048 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.790 Y87.220 E0.12048 ; perimeter
G1 X76.643 Y86.202 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.12048 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.810 Y78.853 E0.12048 ; perimeter
G1 X83.664 Y77.836 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.12048 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.287 Y78.394 E0.12048 ; perimeter
G1 X166.631 Y78.804 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.12048 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.308 Y86.761 E0.12048 ; perimeter
G1 X173.652 Y87.171 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.12048 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X166.336 Y77.836 E0.12048 ; perimeter
G1 X167.013 Y78.643 E0.04339 ; perimeter
G1 X167.190 Y78.853 E0.01132 ; perimeter
G1 X164.949 Y80.733 E0.12048 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X173.357 Y86.202 E0.12048 ; perimeter
G1 X174.210 Y87.220 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.12048 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X151.013 Y81.038 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y76.467 E0.18827 ; perimeter
G1 X152.153 Y76.467 E0.04695 ; perimeter
G1 X152.153 Y81.038 E0.18827 ; perimeter
G1 X151.073 Y81.038 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.617 Y76.071 E0.22093 ; perimeter
G1 X152.549 Y76.071 E0.07960 ; perimeter
G1 X152.549 Y80.899 E0.19888 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X184.904 Y59.457 E0.90551 ; perimeter
G1 X185.436 Y59.078 E0.02691 ; perimeter
G1 X185.733 Y58.907 E0.01411 ; perimeter
G1 X186.167 Y58.718 E0.01950 ; perimeter
G1 X186.606 Y58.588 E0.01886 ; perimeter
G1 X187.034 Y58.516 E0.01786 ; perimeter
G1 X187.633 Y58.510 E0.02469 ; perimeter
G1 X188.030 Y58.571 E0.01656 ; perimeter
G1 X188.383 Y58.681 E0.01524 ; perimeter
G1 X188.721 Y58.849 E0.01551 ; perimeter
G1 X188.994 Y59.045 E0.01387 ; perimeter
G1 X188.436 Y59.513 E0.03003 ; perimeter
G1 X188.222 Y59.380 E0.01039 ; perimeter
G1 X187.804 Y59.225 E0.01834 ; perimeter
G1 X187.362 Y59.152 E0.01847 ; perimeter
G1 X186.910 Y59.157 E0.01864 ; perimeter
G1 X186.459 Y59.238 E0.01884 ; perimeter
G1 X186.023 Y59.389 E0.01903 ; perimeter
G1 X185.613 Y59.603 E0.01904 ; perimeter
G1 X185.327 Y59.805 E0.01444 ; perimeter
G1 X168.261 Y74.121 E0.91764 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X150.677 Y81.434 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X150.220 Y75.675 E0.25358 ; perimeter
G1 X152.945 Y75.675 E0.11226 ; perimeter
G1 X152.945 Y80.502 E0.19888 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X184.662 Y59.143 E0.90021 ; perimeter
G1 X185.222 Y58.744 E0.02835 ; perimeter
G1 X185.555 Y58.552 E0.01583 ; perimeter
G1 X186.031 Y58.345 E0.02140 ; perimeter
G1 X186.517 Y58.201 E0.02086 ; perimeter
G1 X186.999 Y58.120 E0.02014 ; perimeter
G1 X187.661 Y58.113 E0.02730 ; perimeter
G1 X188.117 Y58.184 E0.01898 ; perimeter
G1 X188.369 Y58.257 E0.01081 ; perimeter
G1 X188.536 Y58.315 E0.00731 ; perimeter
G1 X188.925 Y58.508 E0.01789 ; perimeter
G1 X189.268 Y58.753 E0.01736 ; perimeter
G1 X189.580 Y59.070 E0.01834 ; perimeter
G1 X188.448 Y60.020 E0.06089 ; perimeter
G1 X188.353 Y59.929 E0.00544 ; perimeter
G1 X188.046 Y59.738 E0.01489 ; perimeter
G1 X187.702 Y59.610 E0.01513 ; perimeter
G1 X187.332 Y59.548 E0.01546 ; perimeter
G1 X186.947 Y59.553 E0.01584 ; perimeter
G1 X186.560 Y59.622 E0.01621 ; perimeter
G1 X186.180 Y59.754 E0.01654 ; perimeter
G1 X185.821 Y59.942 E0.01673 ; perimeter
G1 X185.570 Y60.120 E0.01267 ; perimeter
G1 X168.405 Y74.517 E0.92292 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X150.280 Y81.830 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.359 Y81.455 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.248 Y78.539 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X151.128 Y80.875 ; move to first infill point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7629.4
G1 X151.837 Y80.167 E0.04914 ; infill
G1 X151.837 Y79.500 E0.03273 ; infill
G1 X151.329 Y80.007 E0.03521 ; infill
G1 X151.329 Y79.340 E0.03273 ; infill
G1 X151.837 Y78.832 E0.03521 ; infill
G1 X151.837 Y78.165 E0.03273 ; infill
G1 X151.329 Y78.673 E0.03521 ; infill
G1 X151.329 Y78.005 E0.03273 ; infill
G1 X151.837 Y77.498 E0.03521 ; infill
G1 X151.837 Y76.830 E0.03273 ; infill
G1 X151.128 Y77.539 E0.04914 ; infill
G1 F8640
G1 X151.837 Y76.830 E-0.23134 ; wipe and retract
G1 X151.837 Y77.498 E-0.15408 ; wipe and retract
G1 X151.329 Y78.005 E-0.16575 ; wipe and retract
G1 X151.329 Y78.673 E-0.15408 ; wipe and retract
G1 X151.497 Y78.505 E-0.05474 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X193.446 Y70.561 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X193.102 Y70.151 E0.02205 ; perimeter
G1 X195.681 Y67.988 E0.13866 ; perimeter
G1 X192.270 Y63.922 E0.21861 ; perimeter
G1 X189.691 Y66.086 E0.13866 ; perimeter
G1 X189.347 Y65.676 E0.02205 ; perimeter
G1 X191.926 Y63.512 E0.13866 ; perimeter
G1 X189.477 Y60.594 E0.15696 ; perimeter
G1 X189.984 Y60.168 E0.02729 ; perimeter
G1 X198.981 Y70.890 E0.57663 ; perimeter
G1 X198.474 Y71.316 E0.02729 ; perimeter
G1 X196.025 Y68.398 E0.15696 ; perimeter
G1 X193.492 Y70.523 E0.13619 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.398 Y71.120 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X192.544 Y70.102 E0.05471 ; perimeter
G1 X195.122 Y67.939 E0.13866 ; perimeter
G1 X192.221 Y64.481 E0.18596 ; perimeter
G1 X189.642 Y66.644 E0.13866 ; perimeter
G1 X188.789 Y65.627 E0.05471 ; perimeter
G1 X191.367 Y63.464 E0.13866 ; perimeter
G1 X188.918 Y60.545 E0.15696 ; perimeter
G1 X190.033 Y59.609 E0.05995 ; perimeter
G1 X199.540 Y70.939 E0.60929 ; perimeter
G1 X198.425 Y71.875 E0.05995 ; perimeter
G1 X195.976 Y68.956 E0.15696 ; perimeter
G1 X193.443 Y71.081 E0.13619 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.441 Y70.722 F10800.000 ; move inwards before travel
G1 F8640
G1 X192.544 Y70.102 E-0.30695 ; wipe and retract
G1 X194.047 Y68.841 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 P68 R42
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X150.808 Y100.738 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.808 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E0.86928 ; perimeter
G1 X199.600 Y76.967 E1.48914 ; perimeter
G1 X199.920 Y76.657 E0.01834 ; perimeter
G1 X200.204 Y76.289 E0.01917 ; perimeter
G1 X200.428 Y75.885 E0.01903 ; perimeter
G1 X200.586 Y75.456 E0.01884 ; perimeter
G1 X200.670 Y75.011 E0.01864 ; perimeter
G1 X200.674 Y74.563 E0.01847 ; perimeter
G1 X200.594 Y74.125 E0.01834 ; perimeter
G1 X200.430 Y73.717 E0.01810 ; perimeter
G1 X200.239 Y73.426 E0.01436 ; perimeter
G1 X199.435 Y72.464 E0.05165 ; perimeter
G1 X199.943 Y72.037 E0.02734 ; perimeter
G1 X200.833 Y73.098 E0.05704 ; perimeter
G1 X201.050 Y73.405 E0.01549 ; perimeter
G1 X201.204 Y73.726 E0.01467 ; perimeter
G1 X201.308 Y74.079 E0.01516 ; perimeter
G1 X201.359 Y74.470 E0.01627 ; perimeter
G1 X201.350 Y74.856 E0.01590 ; perimeter
G1 X201.278 Y75.296 E0.01837 ; perimeter
G1 X201.094 Y75.853 E0.02417 ; perimeter
G1 X200.888 Y76.265 E0.01896 ; perimeter
G1 X200.715 Y76.531 E0.01308 ; perimeter
G1 X200.312 Y77.031 E0.02643 ; perimeter
G1 X199.948 Y77.374 E0.02064 ; perimeter
G1 X172.104 Y100.738 E1.49736 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X150.868 Y100.738 E0.59656 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.412 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X150.412 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E0.87966 ; perimeter
G1 X199.334 Y76.673 E1.48261 ; perimeter
G1 X199.623 Y76.393 E0.01657 ; perimeter
G1 X199.872 Y76.070 E0.01678 ; perimeter
G1 X200.067 Y75.720 E0.01654 ; perimeter
G1 X200.203 Y75.350 E0.01621 ; perimeter
G1 X200.274 Y74.972 E0.01584 ; perimeter
G1 X200.277 Y74.597 E0.01546 ; perimeter
G1 X200.211 Y74.236 E0.01513 ; perimeter
G1 X200.077 Y73.901 E0.01483 ; perimeter
G1 X199.920 Y73.662 E0.01178 ; perimeter
G1 X198.877 Y72.414 E0.06700 ; perimeter
G1 X199.992 Y71.479 E0.05997 ; perimeter
G1 X201.148 Y72.856 E0.07405 ; perimeter
G1 X201.393 Y73.203 E0.01754 ; perimeter
G1 X201.575 Y73.583 E0.01736 ; perimeter
G1 X201.697 Y73.997 E0.01776 ; perimeter
G1 X201.755 Y74.442 E0.01849 ; perimeter
G1 X201.745 Y74.897 E0.01874 ; perimeter
G1 X201.667 Y75.377 E0.02006 ; perimeter
G1 X201.459 Y76.009 E0.02738 ; perimeter
G1 X201.232 Y76.462 E0.02089 ; perimeter
G1 X201.036 Y76.764 E0.01483 ; perimeter
G1 X200.604 Y77.301 E0.02838 ; perimeter
G1 X200.211 Y77.671 E0.02223 ; perimeter
G1 X172.248 Y101.134 E1.50377 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X150.472 Y101.134 E0.59656 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.622 Y100.794 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.412 Y99.806 E-0.30695 ; wipe and retract
G1 X152.374 Y99.806 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X166.843 Y100.714 ; move to first infill point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.061 Y101.496 E0.05566 ; infill
G1 X166.061 Y101.931 E0.02188 ; infill
G1 X166.312 Y101.931 E0.01260 ; infill
G1 X167.327 Y100.915 E0.07230 ; infill
G1 X168.012 Y100.915 E0.03448 ; infill
G1 X166.996 Y101.931 E0.07230 ; infill
G1 X167.681 Y101.931 E0.03448 ; infill
G1 X168.697 Y100.915 E0.07230 ; infill
G1 X169.382 Y100.915 E0.03448 ; infill
G1 X168.366 Y101.931 E0.07230 ; infill
G1 X169.051 Y101.931 E0.03448 ; infill
G1 X169.744 Y101.238 E0.04931 ; infill
G1 X169.744 Y101.923 E0.03448 ; infill
G1 X169.535 Y102.131 E0.01484 ; infill
G1 F8640
G1 X169.744 Y101.923 E-0.06809 ; wipe and retract
G1 X169.744 Y101.238 E-0.15815 ; wipe and retract
G1 X169.051 Y101.931 E-0.22616 ; wipe and retract
G1 X168.366 Y101.931 E-0.15815 ; wipe and retract
G1 X168.824 Y101.473 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X98.907 Y138.884 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.59903 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X49.767 Y115.520 E1.49736 ; perimeter
G1 X49.397 Y115.172 E0.02092 ; perimeter
G1 X49.086 Y114.803 E0.01990 ; perimeter
G1 X48.826 Y114.409 E0.01945 ; perimeter
G1 X48.621 Y114.000 E0.01886 ; perimeter
G1 X48.474 Y113.584 E0.01818 ; perimeter
G1 X48.385 Y113.170 E0.01742 ; perimeter
G1 X48.356 Y112.767 E0.01664 ; perimeter
G1 X48.405 Y112.229 E0.02228 ; perimeter
G1 X48.508 Y111.878 E0.01507 ; perimeter
G1 X48.666 Y111.549 E0.01500 ; perimeter
G1 X48.829 Y111.315 E0.01177 ; perimeter
G1 X49.773 Y110.184 E0.06067 ; perimeter
G1 X50.279 Y110.609 E0.02723 ; perimeter
G1 X49.514 Y111.520 E0.04901 ; perimeter
G1 X49.286 Y111.860 E0.01685 ; perimeter
G1 X49.121 Y112.271 E0.01826 ; perimeter
G1 X49.041 Y112.709 E0.01834 ; perimeter
G1 X49.045 Y113.157 E0.01847 ; perimeter
G1 X49.129 Y113.602 E0.01864 ; perimeter
G1 X49.270 Y113.985 E0.01682 ; perimeter
G1 X49.508 Y114.431 E0.02082 ; perimeter
G1 X49.795 Y114.804 E0.01939 ; perimeter
G1 X50.115 Y115.113 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.48914 ; perimeter
G1 X98.907 Y138.349 E0.86928 ; perimeter
G1 X98.907 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.303 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.59903 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03672 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X49.504 Y115.817 E1.50377 ; perimeter
G1 X49.109 Y115.445 E0.02233 ; perimeter
G1 X48.768 Y115.041 E0.02179 ; perimeter
G1 X48.482 Y114.608 E0.02138 ; perimeter
G1 X48.255 Y114.155 E0.02086 ; perimeter
G1 X48.091 Y113.692 E0.02025 ; perimeter
G1 X47.992 Y113.226 E0.01960 ; perimeter
G1 X47.958 Y112.768 E0.01894 ; perimeter
G1 X48.017 Y112.145 E0.02579 ; perimeter
G1 X48.138 Y111.731 E0.01773 ; perimeter
G1 X48.322 Y111.349 E0.01748 ; perimeter
G1 X48.513 Y111.074 E0.01380 ; perimeter
G1 X49.723 Y109.625 E0.07775 ; perimeter
G1 X50.837 Y110.560 E0.05993 ; perimeter
G1 X49.831 Y111.759 E0.06447 ; perimeter
G1 X49.638 Y112.046 E0.01426 ; perimeter
G1 X49.504 Y112.382 E0.01489 ; perimeter
G1 X49.438 Y112.743 E0.01513 ; perimeter
G1 X49.441 Y113.118 E0.01546 ; perimeter
G1 X49.512 Y113.496 E0.01584 ; perimeter
G1 X49.632 Y113.823 E0.01432 ; perimeter
G1 X49.842 Y114.215 E0.01833 ; perimeter
G1 X50.092 Y114.539 E0.01685 ; perimeter
G1 X50.380 Y114.819 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.48261 ; perimeter
G1 X99.303 Y137.952 E0.87966 ; perimeter
G1 X99.303 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X98.903 Y139.272 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.012 Y139.234 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X83.445 Y140.278 ; move to first infill point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.654 Y140.069 E0.01484 ; infill
G1 X83.654 Y139.384 E0.03448 ; infill
G1 X82.961 Y140.077 E0.04931 ; infill
G1 X82.276 Y140.077 E0.03448 ; infill
G1 X83.292 Y139.061 E0.07230 ; infill
G1 X82.607 Y139.061 E0.03448 ; infill
G1 X81.591 Y140.077 E0.07230 ; infill
G1 X80.906 Y140.077 E0.03448 ; infill
G1 X81.922 Y139.061 E0.07230 ; infill
G1 X81.237 Y139.061 E0.03448 ; infill
G1 X80.221 Y140.077 E0.07230 ; infill
G1 X79.971 Y140.077 E0.01260 ; infill
G1 X79.971 Y139.642 E0.02188 ; infill
G1 X80.753 Y138.860 E0.05566 ; infill
G1 F8640
G1 X79.971 Y139.642 E-0.25531 ; wipe and retract
G1 X79.971 Y140.077 E-0.10036 ; wipe and retract
G1 X80.221 Y140.077 E-0.05779 ; wipe and retract
G1 X81.237 Y139.061 E-0.33164 ; wipe and retract
G1 X81.301 Y139.061 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X56.268 Y108.707 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X53.690 Y106.544 E0.13866 ; perimeter
G1 X51.241 Y109.462 E0.15696 ; perimeter
G1 X50.733 Y109.037 E0.02729 ; perimeter
G1 X59.731 Y98.314 E0.57663 ; perimeter
G1 X60.238 Y98.740 E0.02729 ; perimeter
G1 X57.789 Y101.659 E0.15696 ; perimeter
G1 X60.368 Y103.822 E0.13866 ; perimeter
G1 X60.024 Y104.232 E0.02205 ; perimeter
G1 X57.445 Y102.069 E0.13866 ; perimeter
G1 X54.034 Y106.134 E0.21861 ; perimeter
G1 X56.613 Y108.297 E0.13866 ; perimeter
G1 X56.307 Y108.661 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.317 Y109.266 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X53.739 Y107.102 E0.13866 ; perimeter
G1 X51.290 Y110.021 E0.15696 ; perimeter
G1 X50.175 Y109.085 E0.05995 ; perimeter
G1 X59.682 Y97.756 E0.60929 ; perimeter
G1 X60.797 Y98.691 E0.05995 ; perimeter
G1 X58.348 Y101.610 E0.15696 ; perimeter
G1 X60.926 Y103.773 E0.13866 ; perimeter
G1 X60.072 Y104.791 E0.05471 ; perimeter
G1 X57.494 Y102.627 E0.13866 ; perimeter
G1 X54.592 Y106.085 E0.18596 ; perimeter
G1 X57.171 Y108.249 E0.13866 ; perimeter
G1 X56.356 Y109.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.045 Y108.972 F10800.000 ; move inwards before travel
G1 F8640
G1 X53.797 Y107.149 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X98.702 Y119.184 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.04695 ; perimeter
G1 X97.562 Y114.614 E0.18827 ; perimeter
G1 X98.702 Y114.614 E0.04695 ; perimeter
G1 X98.702 Y119.124 E0.18580 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.15621 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X64.465 Y98.012 E0.91361 ; perimeter
G1 X64.104 Y97.751 E0.01834 ; perimeter
G1 X63.692 Y97.535 E0.01917 ; perimeter
G1 X63.255 Y97.384 E0.01903 ; perimeter
G1 X62.805 Y97.303 E0.01884 ; perimeter
G1 X62.353 Y97.298 E0.01864 ; perimeter
G1 X61.910 Y97.372 E0.01847 ; perimeter
G1 X61.503 Y97.523 E0.01790 ; perimeter
G1 X61.280 Y97.660 E0.01080 ; perimeter
G1 X60.721 Y97.191 E0.03006 ; perimeter
G1 X60.994 Y96.995 E0.01387 ; perimeter
G1 X61.324 Y96.831 E0.01516 ; perimeter
G1 X61.701 Y96.713 E0.01627 ; perimeter
G1 X62.082 Y96.655 E0.01590 ; perimeter
G1 X62.528 Y96.649 E0.01837 ; perimeter
G1 X63.109 Y96.734 E0.02417 ; perimeter
G1 X63.547 Y96.865 E0.01886 ; perimeter
G1 X63.982 Y97.053 E0.01950 ; perimeter
G1 X64.278 Y97.224 E0.01411 ; perimeter
G1 X64.810 Y97.603 E0.02691 ; perimeter
G1 X81.649 Y111.732 E0.90551 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y114.217 E0.19888 ; perimeter
G1 X99.098 Y114.217 E0.07960 ; perimeter
G1 X99.098 Y119.520 E0.21846 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.17848 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X64.221 Y98.324 E0.91897 ; perimeter
G1 X63.895 Y98.089 E0.01657 ; perimeter
G1 X63.534 Y97.900 E0.01678 ; perimeter
G1 X63.155 Y97.768 E0.01654 ; perimeter
G1 X62.768 Y97.699 E0.01621 ; perimeter
G1 X62.383 Y97.694 E0.01584 ; perimeter
G1 X62.013 Y97.756 E0.01546 ; perimeter
G1 X61.677 Y97.881 E0.01474 ; perimeter
G1 X61.362 Y98.074 E0.01524 ; perimeter
G1 X61.267 Y98.166 E0.00547 ; perimeter
G1 X60.134 Y97.216 E0.06089 ; perimeter
G1 X60.447 Y96.899 E0.01834 ; perimeter
G1 X60.789 Y96.654 E0.01736 ; perimeter
G1 X61.176 Y96.462 E0.01776 ; perimeter
G1 X61.604 Y96.328 E0.01849 ; perimeter
G1 X62.053 Y96.259 E0.01874 ; perimeter
G1 X62.709 Y96.265 E0.02701 ; perimeter
G1 X63.198 Y96.347 E0.02043 ; perimeter
G1 X63.683 Y96.491 E0.02086 ; perimeter
G1 X64.160 Y96.698 E0.02140 ; perimeter
G1 X64.493 Y96.890 E0.01583 ; perimeter
G1 X65.053 Y97.289 E0.02835 ; perimeter
G1 X81.793 Y111.335 E0.90021 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y113.821 E0.19888 ; perimeter
G1 X99.494 Y113.821 E0.11226 ; perimeter
G1 X99.494 Y119.916 E0.25111 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.124 Y119.826 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.203 Y119.962 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X97.677 Y119.021 ; move to first infill point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7629.38
G1 X98.386 Y118.313 E0.04914 ; infill
G1 X98.386 Y117.646 E0.03273 ; infill
G1 X97.878 Y118.153 E0.03521 ; infill
G1 X97.878 Y117.486 E0.03273 ; infill
G1 X98.386 Y116.978 E0.03521 ; infill
G1 X98.386 Y116.311 E0.03273 ; infill
G1 X97.878 Y116.819 E0.03521 ; infill
G1 X97.878 Y116.151 E0.03273 ; infill
G1 X98.386 Y115.644 E0.03521 ; infill
G1 X98.386 Y114.976 E0.03273 ; infill
G1 X97.677 Y115.685 E0.04914 ; infill
G1 F8640
G1 X98.386 Y114.976 E-0.23134 ; wipe and retract
G1 X98.386 Y115.644 E-0.15408 ; wipe and retract
G1 X97.878 Y116.151 E-0.16575 ; wipe and retract
G1 X97.878 Y116.819 E-0.15408 ; wipe and retract
G1 X98.046 Y116.651 E-0.05473 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X76.063 Y125.317 E0.12048 ; perimeter
G1 X76.407 Y124.907 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.12048 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X83.084 Y116.950 E0.12048 ; perimeter
G1 X83.428 Y116.540 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.12048 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.505 Y125.366 E0.12048 ; perimeter
G1 X76.358 Y124.349 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.12048 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X82.525 Y116.999 E0.12048 ; perimeter
G1 X83.379 Y115.982 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.12048 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X166.002 Y116.540 E0.12048 ; perimeter
G1 X166.346 Y116.950 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.12048 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X173.022 Y124.907 E0.12048 ; perimeter
G1 X173.367 Y125.317 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.12048 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
M73 Q69 S43
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X166.051 Y115.982 E0.12048 ; perimeter
G1 X166.728 Y116.789 E0.04339 ; perimeter
G1 X166.904 Y116.999 E0.01132 ; perimeter
G1 X164.664 Y118.879 E0.12048 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.071 Y124.349 E0.12048 ; perimeter
G1 X173.925 Y125.366 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.12048 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X150.728 Y119.184 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y114.614 E0.18827 ; perimeter
G1 X151.868 Y114.614 E0.04695 ; perimeter
G1 X151.868 Y119.184 E0.18827 ; perimeter
G1 X150.788 Y119.184 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.332 Y114.217 E0.22093 ; perimeter
G1 X152.264 Y114.217 E0.07960 ; perimeter
G1 X152.264 Y119.045 E0.19888 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X184.619 Y97.603 E0.90551 ; perimeter
G1 X185.151 Y97.224 E0.02691 ; perimeter
G1 X185.448 Y97.053 E0.01411 ; perimeter
G1 X185.882 Y96.865 E0.01950 ; perimeter
G1 X186.321 Y96.734 E0.01886 ; perimeter
G1 X186.749 Y96.662 E0.01786 ; perimeter
G1 X187.348 Y96.656 E0.02469 ; perimeter
G1 X187.745 Y96.717 E0.01656 ; perimeter
G1 X188.098 Y96.828 E0.01524 ; perimeter
G1 X188.435 Y96.995 E0.01551 ; perimeter
G1 X188.709 Y97.191 E0.01387 ; perimeter
G1 X188.151 Y97.659 E0.03003 ; perimeter
G1 X187.936 Y97.526 E0.01039 ; perimeter
G1 X187.519 Y97.372 E0.01834 ; perimeter
G1 X187.077 Y97.298 E0.01847 ; perimeter
G1 X186.624 Y97.303 E0.01864 ; perimeter
G1 X186.174 Y97.384 E0.01884 ; perimeter
G1 X185.738 Y97.535 E0.01903 ; perimeter
G1 X185.328 Y97.749 E0.01904 ; perimeter
G1 X185.042 Y97.952 E0.01444 ; perimeter
G1 X167.976 Y112.267 E0.91764 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X150.392 Y119.580 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.935 Y113.821 E0.25358 ; perimeter
G1 X152.660 Y113.821 E0.11226 ; perimeter
G1 X152.660 Y118.648 E0.19888 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X184.376 Y97.289 E0.90021 ; perimeter
G1 X184.937 Y96.890 E0.02835 ; perimeter
G1 X185.270 Y96.698 E0.01583 ; perimeter
G1 X185.746 Y96.491 E0.02140 ; perimeter
G1 X186.231 Y96.347 E0.02086 ; perimeter
G1 X186.714 Y96.266 E0.02014 ; perimeter
G1 X187.376 Y96.259 E0.02730 ; perimeter
G1 X187.831 Y96.330 E0.01898 ; perimeter
G1 X188.083 Y96.403 E0.01081 ; perimeter
G1 X188.251 Y96.461 E0.00731 ; perimeter
G1 X188.640 Y96.654 E0.01789 ; perimeter
G1 X188.983 Y96.899 E0.01736 ; perimeter
G1 X189.295 Y97.216 E0.01834 ; perimeter
G1 X188.163 Y98.166 E0.06089 ; perimeter
G1 X188.068 Y98.075 E0.00544 ; perimeter
G1 X187.761 Y97.884 E0.01489 ; perimeter
G1 X187.417 Y97.756 E0.01513 ; perimeter
G1 X187.046 Y97.694 E0.01546 ; perimeter
G1 X186.662 Y97.699 E0.01584 ; perimeter
G1 X186.275 Y97.768 E0.01621 ; perimeter
G1 X185.895 Y97.900 E0.01654 ; perimeter
G1 X185.536 Y98.088 E0.01673 ; perimeter
G1 X185.284 Y98.266 E0.01267 ; perimeter
G1 X168.120 Y112.663 E0.92292 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X149.995 Y119.976 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.074 Y119.601 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.963 Y116.685 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X150.843 Y119.021 ; move to first infill point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7629.4
G1 X151.552 Y118.313 E0.04914 ; infill
G1 X151.552 Y117.646 E0.03273 ; infill
G1 X151.044 Y118.153 E0.03521 ; infill
G1 X151.044 Y117.486 E0.03273 ; infill
G1 X151.552 Y116.978 E0.03521 ; infill
G1 X151.552 Y116.311 E0.03273 ; infill
G1 X151.044 Y116.819 E0.03521 ; infill
G1 X151.044 Y116.151 E0.03273 ; infill
G1 X151.552 Y115.644 E0.03521 ; infill
G1 X151.552 Y114.976 E0.03273 ; infill
G1 X150.843 Y115.685 E0.04914 ; infill
G1 F8640
G1 X151.552 Y114.976 E-0.23134 ; wipe and retract
G1 X151.552 Y115.644 E-0.15408 ; wipe and retract
G1 X151.044 Y116.151 E-0.16575 ; wipe and retract
G1 X151.044 Y116.819 E-0.15408 ; wipe and retract
G1 X151.212 Y116.651 E-0.05474 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X193.161 Y108.707 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X192.817 Y108.297 E0.02205 ; perimeter
G1 X195.396 Y106.134 E0.13866 ; perimeter
G1 X191.984 Y102.069 E0.21861 ; perimeter
G1 X189.406 Y104.232 E0.13866 ; perimeter
G1 X189.062 Y103.822 E0.02205 ; perimeter
G1 X191.640 Y101.659 E0.13866 ; perimeter
G1 X189.191 Y98.740 E0.15696 ; perimeter
G1 X189.699 Y98.314 E0.02729 ; perimeter
G1 X198.696 Y109.037 E0.57663 ; perimeter
G1 X198.189 Y109.462 E0.02729 ; perimeter
G1 X195.740 Y106.544 E0.15696 ; perimeter
G1 X193.207 Y108.669 E0.13619 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.112 Y109.266 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X192.259 Y108.249 E0.05471 ; perimeter
G1 X194.837 Y106.085 E0.13866 ; perimeter
G1 X191.936 Y102.627 E0.18596 ; perimeter
G1 X189.357 Y104.791 E0.13866 ; perimeter
G1 X188.504 Y103.773 E0.05471 ; perimeter
G1 X191.082 Y101.610 E0.13866 ; perimeter
G1 X188.633 Y98.691 E0.15696 ; perimeter
G1 X189.748 Y97.756 E0.05995 ; perimeter
G1 X199.255 Y109.085 E0.60929 ; perimeter
G1 X198.140 Y110.021 E0.05995 ; perimeter
G1 X195.691 Y107.102 E0.15696 ; perimeter
G1 X193.158 Y109.227 E0.13619 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.155 Y108.868 F10800.000 ; move inwards before travel
G1 F8640
G1 X192.259 Y108.249 E-0.30695 ; wipe and retract
G1 X193.762 Y106.987 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X150.523 Y138.884 ; move to first perimeter point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.523 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E0.86928 ; perimeter
G1 X199.315 Y115.113 E1.48914 ; perimeter
G1 X199.634 Y114.804 E0.01834 ; perimeter
G1 X199.919 Y114.435 E0.01917 ; perimeter
G1 X200.143 Y114.031 E0.01903 ; perimeter
G1 X200.301 Y113.602 E0.01884 ; perimeter
G1 X200.385 Y113.157 E0.01864 ; perimeter
G1 X200.389 Y112.709 E0.01847 ; perimeter
G1 X200.309 Y112.271 E0.01834 ; perimeter
G1 X200.145 Y111.863 E0.01810 ; perimeter
G1 X199.954 Y111.572 E0.01436 ; perimeter
G1 X199.150 Y110.610 E0.05165 ; perimeter
G1 X199.658 Y110.183 E0.02734 ; perimeter
G1 X200.548 Y111.244 E0.05704 ; perimeter
G1 X200.765 Y111.551 E0.01549 ; perimeter
G1 X200.919 Y111.872 E0.01467 ; perimeter
G1 X201.023 Y112.225 E0.01516 ; perimeter
G1 X201.073 Y112.617 E0.01627 ; perimeter
G1 X201.065 Y113.002 E0.01590 ; perimeter
G1 X200.993 Y113.442 E0.01837 ; perimeter
G1 X200.809 Y114.000 E0.02417 ; perimeter
G1 X200.603 Y114.411 E0.01896 ; perimeter
G1 X200.430 Y114.677 E0.01308 ; perimeter
G1 X200.027 Y115.177 E0.02643 ; perimeter
G1 X199.663 Y115.520 E0.02064 ; perimeter
G1 X171.819 Y138.884 E1.49736 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X150.583 Y138.884 E0.59656 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.126 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X150.126 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E0.87966 ; perimeter
G1 X199.049 Y114.819 E1.48261 ; perimeter
G1 X199.338 Y114.539 E0.01657 ; perimeter
G1 X199.587 Y114.216 E0.01678 ; perimeter
G1 X199.782 Y113.866 E0.01654 ; perimeter
G1 X199.917 Y113.496 E0.01621 ; perimeter
G1 X199.989 Y113.118 E0.01584 ; perimeter
G1 X199.992 Y112.743 E0.01546 ; perimeter
G1 X199.926 Y112.382 E0.01513 ; perimeter
G1 X199.792 Y112.048 E0.01483 ; perimeter
G1 X199.635 Y111.808 E0.01178 ; perimeter
G1 X198.592 Y110.560 E0.06700 ; perimeter
G1 X199.707 Y109.625 E0.05997 ; perimeter
G1 X200.863 Y111.002 E0.07405 ; perimeter
G1 X201.108 Y111.350 E0.01754 ; perimeter
G1 X201.290 Y111.729 E0.01736 ; perimeter
G1 X201.412 Y112.143 E0.01776 ; perimeter
G1 X201.469 Y112.588 E0.01849 ; perimeter
G1 X201.460 Y113.043 E0.01874 ; perimeter
G1 X201.381 Y113.524 E0.02006 ; perimeter
G1 X201.174 Y114.155 E0.02738 ; perimeter
G1 X200.947 Y114.608 E0.02089 ; perimeter
G1 X200.751 Y114.910 E0.01483 ; perimeter
G1 X200.319 Y115.447 E0.02838 ; perimeter
G1 X199.926 Y115.817 E0.02223 ; perimeter
G1 X171.963 Y139.280 E1.50377 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X150.186 Y139.280 E0.59656 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.336 Y138.940 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.126 Y137.952 E-0.30695 ; wipe and retract
G1 X152.088 Y137.952 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
G1 X166.558 Y138.860 ; move to first infill point
G1 Z15.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.776 Y139.642 E0.05566 ; infill
G1 X165.776 Y140.077 E0.02188 ; infill
G1 X166.026 Y140.077 E0.01260 ; infill
G1 X167.042 Y139.061 E0.07230 ; infill
G1 X167.727 Y139.061 E0.03448 ; infill
G1 X166.711 Y140.077 E0.07230 ; infill
G1 X167.396 Y140.077 E0.03448 ; infill
G1 X168.412 Y139.061 E0.07230 ; infill
G1 X169.097 Y139.061 E0.03448 ; infill
G1 X168.081 Y140.077 E0.07230 ; infill
G1 X168.766 Y140.077 E0.03448 ; infill
G1 X169.459 Y139.384 E0.04931 ; infill
G1 X169.459 Y140.069 E0.03448 ; infill
G1 X169.250 Y140.278 E0.01484 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;15.25


G1 F8640
G1 X169.459 Y140.069 E-0.06809 ; wipe and retract
G1 X169.459 Y139.384 E-0.15815 ; wipe and retract
G1 X168.766 Y140.077 E-0.22616 ; wipe and retract
G1 X168.081 Y140.077 E-0.15815 ; wipe and retract
G1 X168.539 Y139.619 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;15.25
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X98.901 Y100.738 ; move to first perimeter point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.58704 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X49.918 Y77.262 E1.50457 ; perimeter
G1 X49.549 Y76.915 E0.02086 ; perimeter
G1 X49.239 Y76.546 E0.01984 ; perimeter
G1 X48.979 Y76.154 E0.01940 ; perimeter
G1 X48.774 Y75.746 E0.01882 ; perimeter
G1 X48.626 Y75.331 E0.01814 ; perimeter
G1 X48.535 Y74.905 E0.01796 ; perimeter
G1 X48.509 Y74.343 E0.02316 ; perimeter
G1 X48.559 Y73.963 E0.01578 ; perimeter
G1 X48.662 Y73.611 E0.01511 ; perimeter
G1 X48.816 Y73.291 E0.01463 ; perimeter
G1 X49.032 Y72.985 E0.01545 ; perimeter
G1 X49.922 Y71.924 E0.05704 ; perimeter
G1 X50.430 Y72.350 E0.02729 ; perimeter
G1 X49.665 Y73.262 E0.04901 ; perimeter
G1 X49.437 Y73.601 E0.01685 ; perimeter
G1 X49.272 Y74.012 E0.01826 ; perimeter
G1 X49.192 Y74.450 E0.01834 ; perimeter
G1 X49.196 Y74.899 E0.01847 ; perimeter
G1 X49.280 Y75.343 E0.01864 ; perimeter
G1 X49.438 Y75.773 E0.01884 ; perimeter
G1 X49.662 Y76.176 E0.01903 ; perimeter
G1 X49.946 Y76.545 E0.01917 ; perimeter
G1 X50.266 Y76.855 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.49635 ; perimeter
G1 X98.903 Y100.203 E0.85738 ; perimeter
G1 X98.901 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.296 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.58698 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03672 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X49.655 Y77.558 E1.51098 ; perimeter
G1 X49.261 Y77.188 E0.02227 ; perimeter
G1 X48.921 Y76.784 E0.02173 ; perimeter
G1 X48.635 Y76.353 E0.02132 ; perimeter
G1 X48.409 Y75.902 E0.02080 ; perimeter
G1 X48.244 Y75.439 E0.02021 ; perimeter
G1 X48.143 Y74.970 E0.01977 ; perimeter
G1 X48.121 Y74.785 E0.00771 ; perimeter
G1 X48.112 Y74.321 E0.01912 ; perimeter
G1 X48.170 Y73.881 E0.01827 ; perimeter
G1 X48.291 Y73.469 E0.01771 ; perimeter
G1 X48.473 Y73.090 E0.01731 ; perimeter
G1 X48.718 Y72.743 E0.01749 ; perimeter
G1 X49.874 Y71.366 E0.07405 ; perimeter
G1 X50.988 Y72.301 E0.05995 ; perimeter
G1 X49.982 Y73.500 E0.06447 ; perimeter
G1 X49.789 Y73.788 E0.01426 ; perimeter
G1 X49.655 Y74.123 E0.01489 ; perimeter
G1 X49.589 Y74.484 E0.01513 ; perimeter
G1 X49.592 Y74.860 E0.01546 ; perimeter
G1 X49.663 Y75.238 E0.01584 ; perimeter
G1 X49.799 Y75.607 E0.01621 ; perimeter
G1 X49.994 Y75.958 E0.01654 ; perimeter
G1 X50.243 Y76.280 E0.01678 ; perimeter
G1 X50.532 Y76.560 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.48982 ; perimeter
G1 X99.301 Y99.806 E0.86783 ; perimeter
G1 X99.296 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X98.896 Y101.126 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.005 Y101.088 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X84.140 Y101.697 ; move to first infill point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.358 Y100.915 E0.05567 ; infill
G1 X82.673 Y100.915 E0.03448 ; infill
G1 X83.688 Y101.931 E0.07230 ; infill
G1 X83.003 Y101.931 E0.03448 ; infill
G1 X81.988 Y100.915 E0.07230 ; infill
G1 X81.303 Y100.915 E0.03448 ; infill
G1 X82.318 Y101.931 E0.07230 ; infill
G1 X81.634 Y101.931 E0.03448 ; infill
G1 X80.618 Y100.915 E0.07230 ; infill
G1 X80.256 Y100.915 E0.01821 ; infill
G1 X80.256 Y101.238 E0.01627 ; infill
G1 X80.949 Y101.931 E0.04930 ; infill
G1 X80.264 Y101.931 E0.03448 ; infill
G1 X80.055 Y101.722 E0.01483 ; infill
G1 F8640
G1 X80.264 Y101.931 E-0.06804 ; wipe and retract
G1 X80.949 Y101.931 E-0.15815 ; wipe and retract
G1 X80.256 Y101.238 E-0.22612 ; wipe and retract
G1 X80.256 Y100.915 E-0.07462 ; wipe and retract
G1 X80.618 Y100.915 E-0.08353 ; wipe and retract
G1 X81.076 Y101.373 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X56.414 Y70.445 ; move to first perimeter point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X53.841 Y68.285 E0.13839 ; perimeter
G1 X51.392 Y71.204 E0.15696 ; perimeter
G1 X50.885 Y70.778 E0.02729 ; perimeter
G1 X59.882 Y60.055 E0.57663 ; perimeter
M73 P69 R41
G1 X60.389 Y60.481 E0.02729 ; perimeter
G1 X57.940 Y63.400 E0.15696 ; perimeter
G1 X60.514 Y65.559 E0.13839 ; perimeter
G1 X60.170 Y65.969 E0.02205 ; perimeter
G1 X57.596 Y63.810 E0.13839 ; perimeter
G1 X54.185 Y67.875 E0.21861 ; perimeter
G1 X56.759 Y70.034 E0.13839 ; perimeter
G1 X56.453 Y70.399 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.463 Y71.003 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X53.890 Y68.844 E0.13839 ; perimeter
G1 X51.441 Y71.762 E0.15696 ; perimeter
G1 X50.326 Y70.827 E0.05995 ; perimeter
G1 X59.833 Y59.497 E0.60929 ; perimeter
G1 X60.948 Y60.432 E0.05995 ; perimeter
G1 X58.499 Y63.351 E0.15696 ; perimeter
G1 X61.072 Y65.510 E0.13839 ; perimeter
G1 X60.219 Y66.528 E0.05471 ; perimeter
G1 X57.645 Y64.368 E0.13839 ; perimeter
G1 X54.744 Y67.826 E0.18596 ; perimeter
G1 X57.317 Y69.986 E0.13839 ; perimeter
G1 X56.502 Y70.957 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.192 Y70.709 F10800.000 ; move inwards before travel
G1 F8640
G1 X53.943 Y68.887 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X98.987 Y81.038 ; move to first perimeter point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.04695 ; perimeter
G1 X97.847 Y76.292 E0.19548 ; perimeter
G1 X98.987 Y76.292 E0.04695 ; perimeter
G1 X98.987 Y80.978 E0.19301 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.15621 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X64.616 Y59.753 E0.92082 ; perimeter
G1 X64.255 Y59.492 E0.01834 ; perimeter
G1 X63.843 Y59.276 E0.01917 ; perimeter
G1 X63.407 Y59.125 E0.01903 ; perimeter
G1 X62.956 Y59.044 E0.01884 ; perimeter
G1 X62.504 Y59.039 E0.01864 ; perimeter
G1 X62.062 Y59.113 E0.01847 ; perimeter
G1 X61.644 Y59.268 E0.01834 ; perimeter
G1 X61.430 Y59.401 E0.01039 ; perimeter
G1 X60.872 Y58.932 E0.03003 ; perimeter
G1 X61.144 Y58.737 E0.01378 ; perimeter
G1 X61.472 Y58.574 E0.01511 ; perimeter
G1 X61.847 Y58.456 E0.01619 ; perimeter
G1 X62.227 Y58.396 E0.01584 ; perimeter
G1 X62.671 Y58.390 E0.01830 ; perimeter
G1 X63.265 Y58.476 E0.02471 ; perimeter
G1 X63.702 Y58.607 E0.01882 ; perimeter
G1 X64.135 Y58.796 E0.01945 ; perimeter
G1 X64.548 Y59.035 E0.01966 ; perimeter
G1 X64.956 Y59.340 E0.02099 ; perimeter
G1 X81.934 Y73.586 E0.91300 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y75.896 E0.20609 ; perimeter
G1 X99.383 Y75.896 E0.07960 ; perimeter
G1 X99.383 Y81.374 E0.22567 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.17848 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X64.372 Y60.066 E0.92618 ; perimeter
G1 X64.046 Y59.830 E0.01657 ; perimeter
G1 X63.685 Y59.641 E0.01678 ; perimeter
G1 X63.306 Y59.510 E0.01654 ; perimeter
G1 X62.919 Y59.440 E0.01621 ; perimeter
G1 X62.534 Y59.436 E0.01584 ; perimeter
G1 X62.164 Y59.498 E0.01546 ; perimeter
G1 X61.820 Y59.625 E0.01513 ; perimeter
G1 X61.513 Y59.816 E0.01489 ; perimeter
G1 X61.418 Y59.908 E0.00544 ; perimeter
G1 X60.285 Y58.958 E0.06089 ; perimeter
G1 X60.597 Y58.641 E0.01829 ; perimeter
G1 X60.938 Y58.396 E0.01731 ; perimeter
G1 X61.324 Y58.205 E0.01771 ; perimeter
G1 X61.750 Y58.071 E0.01842 ; perimeter
G1 X62.198 Y58.001 E0.01868 ; perimeter
G1 X62.867 Y58.007 E0.02757 ; perimeter
G1 X63.355 Y58.090 E0.02038 ; perimeter
G1 X63.839 Y58.234 E0.02080 ; perimeter
G1 X64.314 Y58.441 E0.02134 ; perimeter
G1 X64.768 Y58.705 E0.02166 ; perimeter
G1 X65.202 Y59.029 E0.02231 ; perimeter
G1 X82.078 Y73.189 E0.90752 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y75.500 E0.20609 ; perimeter
G1 X99.780 Y75.500 E0.11226 ; perimeter
G1 X99.780 Y81.770 E0.25832 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.409 Y81.679 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.488 Y81.816 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X98.872 Y80.843 ; move to first infill point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7387.16
G1 X98.163 Y80.134 E0.05075 ; infill
G1 X98.163 Y79.445 E0.03491 ; infill
G1 X98.671 Y79.953 E0.03636 ; infill
G1 X98.671 Y79.263 E0.03491 ; infill
G1 X98.163 Y78.756 E0.03636 ; infill
G1 X98.163 Y78.067 E0.03491 ; infill
G1 X98.671 Y78.574 E0.03636 ; infill
G1 X98.671 Y77.885 E0.03491 ; infill
G1 X98.163 Y77.377 E0.03636 ; infill
G1 X98.163 Y76.688 E0.03491 ; infill
G1 X98.872 Y77.397 E0.05075 ; infill
G1 F8640
G1 X98.163 Y76.688 E-0.23134 ; wipe and retract
G1 X98.163 Y77.377 E-0.15914 ; wipe and retract
G1 X98.671 Y77.885 E-0.16575 ; wipe and retract
G1 X98.671 Y78.574 E-0.15914 ; wipe and retract
G1 X98.534 Y78.438 E-0.04463 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.410 Y87.223 E0.11713 ; perimeter
G1 X76.755 Y86.813 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.11713 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X83.431 Y78.856 E0.11713 ; perimeter
G1 X83.775 Y78.446 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.11713 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.852 Y87.272 E0.11713 ; perimeter
G1 X76.706 Y86.255 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.11713 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.873 Y78.905 E0.11713 ; perimeter
G1 X83.726 Y77.888 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.11713 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.225 Y78.446 E0.11713 ; perimeter
G1 X166.569 Y78.856 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.11714 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.245 Y86.813 E0.11713 ; perimeter
G1 X173.590 Y87.223 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.11714 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X166.274 Y77.888 E0.11713 ; perimeter
G1 X166.921 Y78.660 E0.04150 ; perimeter
G1 X167.127 Y78.905 E0.01321 ; perimeter
G1 X164.949 Y80.733 E0.11714 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X173.294 Y86.255 E0.11713 ; perimeter
G1 X174.148 Y87.272 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.11714 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X151.013 Y81.038 ; move to first perimeter point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y76.292 E0.19548 ; perimeter
G1 X152.153 Y76.292 E0.04695 ; perimeter
G1 X152.153 Y81.038 E0.19548 ; perimeter
G1 X151.073 Y81.038 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.617 Y75.896 E0.22814 ; perimeter
G1 X152.549 Y75.896 E0.07960 ; perimeter
G1 X152.549 Y80.899 E0.20609 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X185.044 Y59.340 E0.91300 ; perimeter
G1 X185.452 Y59.035 E0.02099 ; perimeter
G1 X185.865 Y58.796 E0.01966 ; perimeter
G1 X186.298 Y58.607 E0.01945 ; perimeter
G1 X186.735 Y58.476 E0.01882 ; perimeter
G1 X187.169 Y58.403 E0.01814 ; perimeter
G1 X187.605 Y58.387 E0.01796 ; perimeter
G1 X188.169 Y58.460 E0.02342 ; perimeter
G1 X188.521 Y58.570 E0.01519 ; perimeter
G1 X188.856 Y58.737 E0.01544 ; perimeter
G1 X189.128 Y58.932 E0.01379 ; perimeter
G1 X188.570 Y59.401 E0.03003 ; perimeter
G1 X188.356 Y59.268 E0.01039 ; perimeter
G1 X187.938 Y59.113 E0.01834 ; perimeter
G1 X187.496 Y59.039 E0.01847 ; perimeter
G1 X187.044 Y59.044 E0.01864 ; perimeter
G1 X186.593 Y59.125 E0.01884 ; perimeter
G1 X186.157 Y59.276 E0.01903 ; perimeter
G1 X185.747 Y59.491 E0.01905 ; perimeter
G1 X185.458 Y59.696 E0.01463 ; perimeter
G1 X168.261 Y74.121 E0.92466 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X150.677 Y81.434 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X150.220 Y75.500 E0.26080 ; perimeter
G1 X152.945 Y75.500 E0.11226 ; perimeter
G1 X152.945 Y80.502 E0.20609 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X184.798 Y59.029 E0.90752 ; perimeter
G1 X185.232 Y58.705 E0.02231 ; perimeter
G1 X185.686 Y58.441 E0.02166 ; perimeter
G1 X186.161 Y58.234 E0.02134 ; perimeter
G1 X186.645 Y58.090 E0.02080 ; perimeter
G1 X187.129 Y58.008 E0.02020 ; perimeter
G1 X187.795 Y58.000 E0.02745 ; perimeter
G1 X188.256 Y58.072 E0.01921 ; perimeter
G1 X188.493 Y58.142 E0.01017 ; perimeter
G1 X188.674 Y58.204 E0.00789 ; perimeter
G1 X189.062 Y58.396 E0.01783 ; perimeter
G1 X189.403 Y58.641 E0.01731 ; perimeter
G1 X189.715 Y58.958 E0.01829 ; perimeter
G1 X188.582 Y59.908 E0.06089 ; perimeter
G1 X188.487 Y59.816 E0.00544 ; perimeter
G1 X188.180 Y59.625 E0.01489 ; perimeter
G1 X187.836 Y59.498 E0.01513 ; perimeter
G1 X187.466 Y59.436 E0.01546 ; perimeter
G1 X187.081 Y59.440 E0.01584 ; perimeter
G1 X186.694 Y59.510 E0.01621 ; perimeter
G1 X186.315 Y59.641 E0.01654 ; perimeter
G1 X185.955 Y59.829 E0.01673 ; perimeter
G1 X185.700 Y60.010 E0.01286 ; perimeter
G1 X168.405 Y74.517 E0.92993 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X150.280 Y81.830 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.359 Y81.455 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.249 Y78.539 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X152.038 Y80.843 ; move to first infill point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7387.16
G1 X151.329 Y80.134 E0.05075 ; infill
G1 X151.329 Y79.445 E0.03491 ; infill
G1 X151.837 Y79.953 E0.03636 ; infill
G1 X151.837 Y79.263 E0.03491 ; infill
G1 X151.329 Y78.756 E0.03636 ; infill
G1 X151.329 Y78.067 E0.03491 ; infill
G1 X151.837 Y78.574 E0.03636 ; infill
G1 X151.837 Y77.885 E0.03491 ; infill
G1 X151.329 Y77.377 E0.03636 ; infill
G1 X151.329 Y76.688 E0.03491 ; infill
G1 X152.038 Y77.397 E0.05075 ; infill
G1 F8640
G1 X151.329 Y76.688 E-0.23134 ; wipe and retract
G1 X151.329 Y77.377 E-0.15914 ; wipe and retract
G1 X151.837 Y77.885 E-0.16575 ; wipe and retract
G1 X151.837 Y78.574 E-0.15914 ; wipe and retract
G1 X151.700 Y78.438 E-0.04463 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X193.585 Y70.445 ; move to first perimeter point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X193.241 Y70.034 E0.02205 ; perimeter
G1 X195.815 Y67.875 E0.13839 ; perimeter
G1 X192.404 Y63.810 E0.21861 ; perimeter
G1 X189.830 Y65.969 E0.13839 ; perimeter
G1 X189.486 Y65.559 E0.02205 ; perimeter
G1 X192.060 Y63.400 E0.13839 ; perimeter
G1 X189.611 Y60.481 E0.15696 ; perimeter
G1 X190.118 Y60.055 E0.02730 ; perimeter
G1 X199.115 Y70.778 E0.57663 ; perimeter
G1 X198.608 Y71.204 E0.02729 ; perimeter
G1 X196.159 Y68.285 E0.15696 ; perimeter
G1 X193.631 Y70.406 E0.13592 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.537 Y71.003 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X192.683 Y69.986 E0.05471 ; perimeter
G1 X195.256 Y67.826 E0.13839 ; perimeter
G1 X192.355 Y64.368 E0.18596 ; perimeter
G1 X189.781 Y66.528 E0.13839 ; perimeter
G1 X188.928 Y65.510 E0.05471 ; perimeter
G1 X191.501 Y63.351 E0.13839 ; perimeter
G1 X189.052 Y60.432 E0.15696 ; perimeter
G1 X190.167 Y59.497 E0.05995 ; perimeter
G1 X199.674 Y70.827 E0.60929 ; perimeter
G1 X198.559 Y71.762 E0.05995 ; perimeter
G1 X196.110 Y68.844 E0.15696 ; perimeter
G1 X193.583 Y70.964 E0.13592 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.580 Y70.605 F10800.000 ; move inwards before travel
G1 F8640
G1 X192.683 Y69.986 E-0.30695 ; wipe and retract
G1 X194.186 Y68.724 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X151.099 Y100.738 ; move to first perimeter point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X151.097 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E0.85738 ; perimeter
G1 X199.734 Y76.855 E1.49635 ; perimeter
G1 X200.054 Y76.545 E0.01834 ; perimeter
G1 X200.338 Y76.176 E0.01917 ; perimeter
G1 X200.562 Y75.773 E0.01903 ; perimeter
G1 X200.720 Y75.343 E0.01884 ; perimeter
G1 X200.804 Y74.899 E0.01864 ; perimeter
G1 X200.808 Y74.450 E0.01847 ; perimeter
G1 X200.728 Y74.012 E0.01834 ; perimeter
G1 X200.564 Y73.604 E0.01812 ; perimeter
G1 X200.371 Y73.310 E0.01449 ; perimeter
G1 X199.569 Y72.351 E0.05150 ; perimeter
G1 X200.078 Y71.924 E0.02734 ; perimeter
G1 X200.968 Y72.985 E0.05704 ; perimeter
G1 X201.184 Y73.291 E0.01545 ; perimeter
G1 X201.338 Y73.611 E0.01463 ; perimeter
G1 X201.441 Y73.963 E0.01511 ; perimeter
G1 X201.492 Y74.353 E0.01619 ; perimeter
G1 X201.485 Y74.738 E0.01584 ; perimeter
G1 X201.414 Y75.176 E0.01829 ; perimeter
G1 X201.226 Y75.746 E0.02471 ; perimeter
G1 X201.020 Y76.156 E0.01892 ; perimeter
G1 X200.765 Y76.543 E0.01908 ; perimeter
G1 X200.451 Y76.915 E0.02005 ; perimeter
G1 X200.082 Y77.262 E0.02086 ; perimeter
G1 X172.104 Y100.738 E1.50457 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X151.159 Y100.738 E0.58457 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.704 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X150.699 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E0.86783 ; perimeter
G1 X199.468 Y76.560 E1.48982 ; perimeter
M73 Q69 S42
G1 X199.757 Y76.280 E0.01657 ; perimeter
G1 X200.006 Y75.958 E0.01678 ; perimeter
G1 X200.201 Y75.607 E0.01654 ; perimeter
G1 X200.337 Y75.238 E0.01621 ; perimeter
G1 X200.408 Y74.860 E0.01584 ; perimeter
G1 X200.411 Y74.484 E0.01546 ; perimeter
G1 X200.345 Y74.123 E0.01513 ; perimeter
G1 X200.211 Y73.789 E0.01484 ; perimeter
G1 X200.052 Y73.547 E0.01192 ; perimeter
G1 X199.011 Y72.302 E0.06686 ; perimeter
G1 X200.126 Y71.366 E0.05997 ; perimeter
G1 X201.282 Y72.743 E0.07405 ; perimeter
G1 X201.527 Y73.090 E0.01749 ; perimeter
G1 X201.709 Y73.469 E0.01731 ; perimeter
G1 X201.830 Y73.881 E0.01771 ; perimeter
G1 X201.888 Y74.324 E0.01842 ; perimeter
G1 X201.880 Y74.778 E0.01868 ; perimeter
G1 X201.803 Y75.257 E0.01999 ; perimeter
G1 X201.591 Y75.902 E0.02796 ; perimeter
G1 X201.364 Y76.354 E0.02084 ; perimeter
G1 X201.080 Y76.783 E0.02121 ; perimeter
G1 X200.739 Y77.188 E0.02180 ; perimeter
G1 X200.345 Y77.558 E0.02227 ; perimeter
G1 X172.248 Y101.134 E1.51098 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X150.764 Y101.134 E0.58450 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.913 Y100.793 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.699 Y99.806 E-0.30701 ; wipe and retract
G1 X152.661 Y99.806 E-0.45299 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X165.860 Y101.722 ; move to first infill point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.069 Y101.931 E0.01484 ; infill
G1 X166.754 Y101.931 E0.03448 ; infill
G1 X166.061 Y101.238 E0.04930 ; infill
G1 X166.061 Y100.915 E0.01627 ; infill
G1 X166.423 Y100.915 E0.01821 ; infill
G1 X167.439 Y101.931 E0.07230 ; infill
G1 X168.124 Y101.931 E0.03448 ; infill
G1 X167.108 Y100.915 E0.07230 ; infill
G1 X167.793 Y100.915 E0.03448 ; infill
G1 X168.808 Y101.931 E0.07230 ; infill
G1 X169.493 Y101.931 E0.03448 ; infill
G1 X168.478 Y100.915 E0.07230 ; infill
G1 X169.163 Y100.915 E0.03448 ; infill
G1 X169.945 Y101.697 E0.05567 ; infill
G1 F8640
G1 X169.163 Y100.915 E-0.25535 ; wipe and retract
G1 X168.478 Y100.915 E-0.15815 ; wipe and retract
G1 X169.493 Y101.931 E-0.33164 ; wipe and retract
G1 X169.429 Y101.931 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X98.616 Y138.884 ; move to first perimeter point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.58704 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X49.633 Y115.408 E1.50457 ; perimeter
G1 X49.264 Y115.061 E0.02086 ; perimeter
G1 X48.954 Y114.693 E0.01984 ; perimeter
G1 X48.694 Y114.300 E0.01940 ; perimeter
G1 X48.489 Y113.892 E0.01882 ; perimeter
G1 X48.341 Y113.477 E0.01814 ; perimeter
G1 X48.249 Y113.051 E0.01796 ; perimeter
G1 X48.224 Y112.489 E0.02316 ; perimeter
G1 X48.274 Y112.109 E0.01578 ; perimeter
G1 X48.377 Y111.758 E0.01511 ; perimeter
G1 X48.531 Y111.438 E0.01463 ; perimeter
G1 X48.747 Y111.131 E0.01545 ; perimeter
G1 X49.637 Y110.071 E0.05704 ; perimeter
G1 X50.145 Y110.496 E0.02729 ; perimeter
G1 X49.380 Y111.408 E0.04901 ; perimeter
G1 X49.152 Y111.747 E0.01685 ; perimeter
G1 X48.987 Y112.159 E0.01826 ; perimeter
G1 X48.907 Y112.596 E0.01834 ; perimeter
G1 X48.911 Y113.045 E0.01847 ; perimeter
G1 X48.995 Y113.489 E0.01864 ; perimeter
G1 X49.152 Y113.919 E0.01884 ; perimeter
G1 X49.377 Y114.322 E0.01903 ; perimeter
G1 X49.661 Y114.691 E0.01917 ; perimeter
G1 X49.981 Y115.001 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.49635 ; perimeter
G1 X98.618 Y138.349 E0.85738 ; perimeter
G1 X98.616 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.011 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.58698 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03672 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X49.370 Y115.704 E1.51098 ; perimeter
G1 X48.976 Y115.334 E0.02227 ; perimeter
G1 X48.636 Y114.931 E0.02173 ; perimeter
G1 X48.350 Y114.499 E0.02132 ; perimeter
G1 X48.124 Y114.048 E0.02080 ; perimeter
G1 X47.959 Y113.586 E0.02021 ; perimeter
G1 X47.858 Y113.117 E0.01977 ; perimeter
G1 X47.836 Y112.931 E0.00771 ; perimeter
G1 X47.827 Y112.467 E0.01912 ; perimeter
G1 X47.885 Y112.027 E0.01827 ; perimeter
G1 X48.006 Y111.615 E0.01771 ; perimeter
G1 X48.188 Y111.236 E0.01731 ; perimeter
G1 X48.433 Y110.889 E0.01749 ; perimeter
G1 X49.588 Y109.512 E0.07405 ; perimeter
G1 X50.703 Y110.448 E0.05995 ; perimeter
G1 X49.697 Y111.646 E0.06447 ; perimeter
G1 X49.504 Y111.934 E0.01426 ; perimeter
G1 X49.369 Y112.269 E0.01489 ; perimeter
G1 X49.303 Y112.631 E0.01513 ; perimeter
G1 X49.307 Y113.006 E0.01546 ; perimeter
G1 X49.378 Y113.384 E0.01584 ; perimeter
G1 X49.514 Y113.753 E0.01621 ; perimeter
G1 X49.709 Y114.104 E0.01654 ; perimeter
G1 X49.958 Y114.426 E0.01678 ; perimeter
G1 X50.246 Y114.706 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.48982 ; perimeter
G1 X99.016 Y137.952 E0.86783 ; perimeter
G1 X99.011 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X98.611 Y139.272 F10800.000 ; move inwards before travel
G1 F8640
G1 X95.720 Y139.234 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X83.854 Y139.843 ; move to first infill point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.072 Y139.061 E0.05567 ; infill
G1 X82.388 Y139.061 E0.03448 ; infill
G1 X83.403 Y140.077 E0.07230 ; infill
G1 X82.718 Y140.077 E0.03448 ; infill
G1 X81.703 Y139.061 E0.07230 ; infill
G1 X81.018 Y139.061 E0.03448 ; infill
G1 X82.033 Y140.077 E0.07230 ; infill
G1 X81.348 Y140.077 E0.03448 ; infill
G1 X80.333 Y139.061 E0.07230 ; infill
G1 X79.971 Y139.061 E0.01821 ; infill
G1 X79.971 Y139.384 E0.01627 ; infill
G1 X80.663 Y140.077 E0.04930 ; infill
G1 X79.978 Y140.077 E0.03448 ; infill
G1 X79.770 Y139.868 E0.01483 ; infill
G1 F8640
G1 X79.978 Y140.077 E-0.06804 ; wipe and retract
G1 X80.663 Y140.077 E-0.15815 ; wipe and retract
G1 X79.971 Y139.384 E-0.22612 ; wipe and retract
G1 X79.971 Y139.061 E-0.07462 ; wipe and retract
G1 X80.333 Y139.061 E-0.08353 ; wipe and retract
G1 X80.791 Y139.519 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X56.129 Y108.591 ; move to first perimeter point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X53.556 Y106.431 E0.13839 ; perimeter
G1 X51.107 Y109.350 E0.15696 ; perimeter
G1 X50.599 Y108.924 E0.02729 ; perimeter
G1 X59.597 Y98.202 E0.57663 ; perimeter
G1 X60.104 Y98.627 E0.02729 ; perimeter
G1 X57.655 Y101.546 E0.15696 ; perimeter
G1 X60.229 Y103.705 E0.13839 ; perimeter
G1 X59.884 Y104.115 E0.02205 ; perimeter
G1 X57.311 Y101.956 E0.13839 ; perimeter
G1 X53.900 Y106.021 E0.21861 ; perimeter
G1 X56.473 Y108.181 E0.13839 ; perimeter
G1 X56.168 Y108.545 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.178 Y109.149 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X53.605 Y106.990 E0.13839 ; perimeter
G1 X51.156 Y109.908 E0.15696 ; perimeter
G1 X50.041 Y108.973 E0.05995 ; perimeter
G1 X59.548 Y97.643 E0.60929 ; perimeter
G1 X60.663 Y98.579 E0.05995 ; perimeter
G1 X58.214 Y101.497 E0.15696 ; perimeter
G1 X60.787 Y103.657 E0.13839 ; perimeter
G1 X59.933 Y104.674 E0.05471 ; perimeter
G1 X57.360 Y102.514 E0.13839 ; perimeter
G1 X54.458 Y105.972 E0.18596 ; perimeter
G1 X57.032 Y108.132 E0.13839 ; perimeter
G1 X56.217 Y109.103 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.906 Y108.856 F10800.000 ; move inwards before travel
G1 F8640
G1 X53.658 Y107.033 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X98.702 Y119.184 ; move to first perimeter point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.04695 ; perimeter
G1 X97.562 Y114.438 E0.19548 ; perimeter
G1 X98.702 Y114.438 E0.04695 ; perimeter
G1 X98.702 Y119.124 E0.19301 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.15621 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X64.331 Y97.899 E0.92082 ; perimeter
G1 X63.970 Y97.638 E0.01834 ; perimeter
G1 X63.558 Y97.422 E0.01917 ; perimeter
G1 X63.121 Y97.271 E0.01903 ; perimeter
G1 X62.671 Y97.191 E0.01884 ; perimeter
G1 X62.219 Y97.185 E0.01864 ; perimeter
G1 X61.776 Y97.259 E0.01847 ; perimeter
G1 X61.359 Y97.414 E0.01834 ; perimeter
G1 X61.145 Y97.547 E0.01039 ; perimeter
G1 X60.587 Y97.078 E0.03003 ; perimeter
G1 X60.858 Y96.883 E0.01378 ; perimeter
G1 X61.187 Y96.720 E0.01511 ; perimeter
G1 X61.562 Y96.602 E0.01619 ; perimeter
G1 X61.942 Y96.543 E0.01584 ; perimeter
G1 X62.386 Y96.536 E0.01830 ; perimeter
G1 X62.979 Y96.622 E0.02471 ; perimeter
G1 X63.417 Y96.753 E0.01882 ; perimeter
G1 X63.850 Y96.942 E0.01945 ; perimeter
G1 X64.263 Y97.181 E0.01966 ; perimeter
G1 X64.671 Y97.486 E0.02099 ; perimeter
G1 X81.649 Y111.732 E0.91300 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y114.042 E0.20609 ; perimeter
G1 X99.098 Y114.042 E0.07960 ; perimeter
G1 X99.098 Y119.520 E0.22567 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.17848 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X64.087 Y98.212 E0.92618 ; perimeter
G1 X63.761 Y97.976 E0.01657 ; perimeter
G1 X63.400 Y97.787 E0.01678 ; perimeter
G1 X63.021 Y97.656 E0.01654 ; perimeter
G1 X62.634 Y97.586 E0.01621 ; perimeter
G1 X62.249 Y97.582 E0.01584 ; perimeter
G1 X61.879 Y97.644 E0.01546 ; perimeter
G1 X61.534 Y97.771 E0.01513 ; perimeter
G1 X61.228 Y97.962 E0.01489 ; perimeter
G1 X61.133 Y98.054 E0.00544 ; perimeter
G1 X60.000 Y97.104 E0.06089 ; perimeter
G1 X60.312 Y96.788 E0.01829 ; perimeter
G1 X60.653 Y96.542 E0.01731 ; perimeter
G1 X61.038 Y96.351 E0.01771 ; perimeter
G1 X61.465 Y96.217 E0.01842 ; perimeter
G1 X61.913 Y96.147 E0.01868 ; perimeter
G1 X62.582 Y96.153 E0.02757 ; perimeter
G1 X63.070 Y96.236 E0.02038 ; perimeter
G1 X63.553 Y96.380 E0.02080 ; perimeter
G1 X64.029 Y96.587 E0.02134 ; perimeter
G1 X64.483 Y96.851 E0.02166 ; perimeter
G1 X64.917 Y97.175 E0.02231 ; perimeter
G1 X81.793 Y111.335 E0.90752 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y113.646 E0.20609 ; perimeter
G1 X99.494 Y113.646 E0.11226 ; perimeter
G1 X99.494 Y119.916 E0.25832 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.124 Y119.825 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.203 Y119.962 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X98.587 Y118.989 ; move to first infill point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7387.16
G1 X97.878 Y118.280 E0.05075 ; infill
G1 X97.878 Y117.591 E0.03491 ; infill
G1 X98.386 Y118.099 E0.03636 ; infill
G1 X98.386 Y117.410 E0.03491 ; infill
G1 X97.878 Y116.902 E0.03636 ; infill
G1 X97.878 Y116.213 E0.03491 ; infill
G1 X98.386 Y116.720 E0.03636 ; infill
G1 X98.386 Y116.031 E0.03491 ; infill
G1 X97.878 Y115.524 E0.03636 ; infill
G1 X97.878 Y114.834 E0.03491 ; infill
G1 X98.587 Y115.543 E0.05075 ; infill
G1 F8640
G1 X97.878 Y114.834 E-0.23134 ; wipe and retract
G1 X97.878 Y115.524 E-0.15914 ; wipe and retract
G1 X98.386 Y116.031 E-0.16575 ; wipe and retract
G1 X98.386 Y116.720 E-0.15914 ; wipe and retract
G1 X98.249 Y116.584 E-0.04463 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X76.125 Y125.369 E0.11713 ; perimeter
G1 X76.469 Y124.959 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.11713 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X83.146 Y117.003 E0.11713 ; perimeter
G1 X83.490 Y116.592 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.11713 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.567 Y125.418 E0.11713 ; perimeter
G1 X76.421 Y124.401 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.11713 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X82.587 Y117.051 E0.11713 ; perimeter
G1 X83.441 Y116.034 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.11713 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X165.940 Y116.592 E0.11713 ; perimeter
G1 X166.284 Y117.003 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.11714 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X172.960 Y124.959 E0.11713 ; perimeter
G1 X173.304 Y125.369 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.11714 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X165.989 Y116.034 E0.11713 ; perimeter
G1 X166.636 Y116.806 E0.04150 ; perimeter
G1 X166.842 Y117.051 E0.01321 ; perimeter
G1 X164.664 Y118.879 E0.11714 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X173.009 Y124.401 E0.11713 ; perimeter
G1 X173.863 Y125.418 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.11714 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X150.728 Y119.184 ; move to first perimeter point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y114.438 E0.19548 ; perimeter
M73 P70 R40
G1 X151.868 Y114.438 E0.04695 ; perimeter
G1 X151.868 Y119.184 E0.19548 ; perimeter
G1 X150.788 Y119.184 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.332 Y114.042 E0.22814 ; perimeter
G1 X152.264 Y114.042 E0.07960 ; perimeter
G1 X152.264 Y119.045 E0.20609 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X184.758 Y97.486 E0.91300 ; perimeter
G1 X185.167 Y97.181 E0.02099 ; perimeter
G1 X185.580 Y96.942 E0.01966 ; perimeter
G1 X186.013 Y96.753 E0.01945 ; perimeter
G1 X186.450 Y96.622 E0.01882 ; perimeter
G1 X186.884 Y96.549 E0.01814 ; perimeter
G1 X187.320 Y96.533 E0.01796 ; perimeter
G1 X187.884 Y96.606 E0.02342 ; perimeter
G1 X188.236 Y96.716 E0.01519 ; perimeter
G1 X188.571 Y96.883 E0.01544 ; perimeter
G1 X188.843 Y97.078 E0.01379 ; perimeter
G1 X188.285 Y97.547 E0.03003 ; perimeter
G1 X188.071 Y97.414 E0.01039 ; perimeter
G1 X187.653 Y97.259 E0.01834 ; perimeter
G1 X187.211 Y97.185 E0.01847 ; perimeter
G1 X186.758 Y97.191 E0.01864 ; perimeter
G1 X186.308 Y97.271 E0.01884 ; perimeter
G1 X185.872 Y97.422 E0.01903 ; perimeter
G1 X185.462 Y97.637 E0.01905 ; perimeter
G1 X185.172 Y97.842 E0.01463 ; perimeter
G1 X167.976 Y112.267 E0.92466 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X150.392 Y119.580 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.935 Y113.646 E0.26080 ; perimeter
G1 X152.660 Y113.646 E0.11226 ; perimeter
G1 X152.660 Y118.648 E0.20609 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X184.512 Y97.175 E0.90752 ; perimeter
G1 X184.946 Y96.851 E0.02231 ; perimeter
G1 X185.401 Y96.587 E0.02166 ; perimeter
G1 X185.876 Y96.380 E0.02134 ; perimeter
G1 X186.360 Y96.236 E0.02080 ; perimeter
G1 X186.844 Y96.154 E0.02020 ; perimeter
G1 X187.510 Y96.146 E0.02745 ; perimeter
G1 X187.971 Y96.218 E0.01921 ; perimeter
G1 X188.208 Y96.288 E0.01017 ; perimeter
G1 X188.389 Y96.350 E0.00789 ; perimeter
G1 X188.776 Y96.542 E0.01783 ; perimeter
G1 X189.118 Y96.788 E0.01731 ; perimeter
G1 X189.429 Y97.104 E0.01829 ; perimeter
G1 X188.297 Y98.054 E0.06089 ; perimeter
G1 X188.202 Y97.962 E0.00544 ; perimeter
G1 X187.895 Y97.771 E0.01489 ; perimeter
G1 X187.551 Y97.644 E0.01513 ; perimeter
G1 X187.181 Y97.582 E0.01546 ; perimeter
G1 X186.796 Y97.586 E0.01584 ; perimeter
G1 X186.409 Y97.656 E0.01621 ; perimeter
G1 X186.029 Y97.787 E0.01654 ; perimeter
G1 X185.670 Y97.975 E0.01673 ; perimeter
G1 X185.415 Y98.156 E0.01286 ; perimeter
G1 X168.120 Y112.663 E0.92993 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X149.995 Y119.976 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.074 Y119.601 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.964 Y116.685 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X151.752 Y118.989 ; move to first infill point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7387.16
G1 X151.044 Y118.280 E0.05075 ; infill
G1 X151.044 Y117.591 E0.03491 ; infill
G1 X151.552 Y118.099 E0.03636 ; infill
G1 X151.552 Y117.410 E0.03491 ; infill
G1 X151.044 Y116.902 E0.03636 ; infill
G1 X151.044 Y116.213 E0.03491 ; infill
G1 X151.552 Y116.720 E0.03636 ; infill
G1 X151.552 Y116.031 E0.03491 ; infill
G1 X151.044 Y115.524 E0.03636 ; infill
G1 X151.044 Y114.834 E0.03491 ; infill
G1 X151.752 Y115.543 E0.05075 ; infill
G1 F8640
G1 X151.044 Y114.834 E-0.23134 ; wipe and retract
G1 X151.044 Y115.524 E-0.15914 ; wipe and retract
G1 X151.552 Y116.031 E-0.16575 ; wipe and retract
G1 X151.552 Y116.720 E-0.15914 ; wipe and retract
G1 X151.415 Y116.584 E-0.04463 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X193.300 Y108.591 ; move to first perimeter point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X192.956 Y108.181 E0.02205 ; perimeter
G1 X195.530 Y106.021 E0.13839 ; perimeter
G1 X192.119 Y101.956 E0.21861 ; perimeter
G1 X189.545 Y104.115 E0.13839 ; perimeter
G1 X189.201 Y103.705 E0.02205 ; perimeter
G1 X191.774 Y101.546 E0.13839 ; perimeter
G1 X189.325 Y98.627 E0.15696 ; perimeter
G1 X189.833 Y98.202 E0.02730 ; perimeter
G1 X198.830 Y108.924 E0.57663 ; perimeter
G1 X198.323 Y109.350 E0.02729 ; perimeter
G1 X195.874 Y106.431 E0.15696 ; perimeter
G1 X193.346 Y108.552 E0.13592 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.251 Y109.149 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X192.398 Y108.132 E0.05471 ; perimeter
G1 X194.971 Y105.972 E0.13839 ; perimeter
G1 X192.070 Y102.514 E0.18596 ; perimeter
G1 X189.496 Y104.674 E0.13839 ; perimeter
G1 X188.643 Y103.657 E0.05471 ; perimeter
G1 X191.216 Y101.497 E0.13839 ; perimeter
G1 X188.767 Y98.579 E0.15696 ; perimeter
G1 X189.882 Y97.643 E0.05995 ; perimeter
G1 X199.389 Y108.973 E0.60929 ; perimeter
G1 X198.274 Y109.908 E0.05995 ; perimeter
G1 X195.825 Y106.990 E0.15696 ; perimeter
G1 X193.297 Y109.110 E0.13592 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.295 Y108.751 F10800.000 ; move inwards before travel
G1 F8640
G1 X192.398 Y108.132 E-0.30695 ; wipe and retract
G1 X193.901 Y106.871 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X150.814 Y138.884 ; move to first perimeter point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.812 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E0.85738 ; perimeter
G1 X199.449 Y115.001 E1.49635 ; perimeter
G1 X199.769 Y114.691 E0.01834 ; perimeter
G1 X200.053 Y114.322 E0.01917 ; perimeter
G1 X200.277 Y113.919 E0.01903 ; perimeter
G1 X200.435 Y113.489 E0.01884 ; perimeter
G1 X200.519 Y113.045 E0.01864 ; perimeter
G1 X200.523 Y112.596 E0.01847 ; perimeter
G1 X200.443 Y112.159 E0.01834 ; perimeter
G1 X200.279 Y111.750 E0.01812 ; perimeter
G1 X200.086 Y111.456 E0.01449 ; perimeter
G1 X199.284 Y110.497 E0.05150 ; perimeter
G1 X199.792 Y110.071 E0.02734 ; perimeter
G1 X200.682 Y111.131 E0.05704 ; perimeter
G1 X200.899 Y111.438 E0.01545 ; perimeter
G1 X201.052 Y111.758 E0.01463 ; perimeter
G1 X201.156 Y112.109 E0.01511 ; perimeter
G1 X201.207 Y112.499 E0.01619 ; perimeter
G1 X201.200 Y112.884 E0.01584 ; perimeter
G1 X201.129 Y113.322 E0.01829 ; perimeter
G1 X200.941 Y113.892 E0.02471 ; perimeter
G1 X200.735 Y114.302 E0.01892 ; perimeter
G1 X200.479 Y114.689 E0.01908 ; perimeter
G1 X200.165 Y115.061 E0.02005 ; perimeter
G1 X199.797 Y115.408 E0.02086 ; perimeter
G1 X171.819 Y138.884 E1.50457 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X150.874 Y138.884 E0.58457 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.419 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X150.414 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E0.86783 ; perimeter
G1 X199.183 Y114.706 E1.48982 ; perimeter
G1 X199.472 Y114.426 E0.01657 ; perimeter
G1 X199.721 Y114.104 E0.01678 ; perimeter
G1 X199.916 Y113.753 E0.01654 ; perimeter
G1 X200.052 Y113.384 E0.01621 ; perimeter
G1 X200.123 Y113.006 E0.01584 ; perimeter
G1 X200.126 Y112.631 E0.01546 ; perimeter
G1 X200.060 Y112.269 E0.01513 ; perimeter
G1 X199.926 Y111.935 E0.01484 ; perimeter
G1 X199.767 Y111.693 E0.01192 ; perimeter
G1 X198.726 Y110.448 E0.06686 ; perimeter
G1 X199.841 Y109.512 E0.05997 ; perimeter
G1 X200.997 Y110.889 E0.07405 ; perimeter
G1 X201.241 Y111.236 E0.01749 ; perimeter
G1 X201.424 Y111.615 E0.01731 ; perimeter
G1 X201.545 Y112.027 E0.01771 ; perimeter
G1 X201.603 Y112.471 E0.01842 ; perimeter
G1 X201.595 Y112.924 E0.01868 ; perimeter
G1 X201.517 Y113.403 E0.01999 ; perimeter
G1 X201.306 Y114.048 E0.02796 ; perimeter
G1 X201.079 Y114.500 E0.02084 ; perimeter
G1 X200.795 Y114.929 E0.02121 ; perimeter
G1 X200.454 Y115.334 E0.02180 ; perimeter
G1 X200.060 Y115.704 E0.02227 ; perimeter
G1 X171.963 Y139.280 E1.51098 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X150.479 Y139.280 E0.58450 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.628 Y138.940 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.414 Y137.952 E-0.30701 ; wipe and retract
G1 X152.375 Y137.952 E-0.45299 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
G1 X165.575 Y139.868 ; move to first infill point
G1 Z15.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.784 Y140.077 E0.01484 ; infill
G1 X166.469 Y140.077 E0.03448 ; infill
G1 X165.776 Y139.384 E0.04930 ; infill
G1 X165.776 Y139.061 E0.01627 ; infill
G1 X166.138 Y139.061 E0.01821 ; infill
G1 X167.153 Y140.077 E0.07230 ; infill
G1 X167.838 Y140.077 E0.03448 ; infill
G1 X166.823 Y139.061 E0.07230 ; infill
G1 X167.508 Y139.061 E0.03448 ; infill
G1 X168.523 Y140.077 E0.07230 ; infill
G1 X169.208 Y140.077 E0.03448 ; infill
G1 X168.193 Y139.061 E0.07230 ; infill
G1 X168.878 Y139.061 E0.03448 ; infill
G1 X169.660 Y139.843 E0.05567 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;15.5


G1 F8640
G1 X168.878 Y139.061 E-0.25535 ; wipe and retract
G1 X168.193 Y139.061 E-0.15815 ; wipe and retract
G1 X169.208 Y140.077 E-0.33164 ; wipe and retract
G1 X169.144 Y140.077 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z15.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;15.5
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X98.620 Y100.738 ; move to first perimeter point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.57546 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X49.784 Y77.149 E1.51179 ; perimeter
G1 X49.416 Y76.803 E0.02080 ; perimeter
G1 X49.106 Y76.436 E0.01978 ; perimeter
G1 X48.847 Y76.045 E0.01935 ; perimeter
G1 X48.642 Y75.638 E0.01877 ; perimeter
G1 X48.494 Y75.224 E0.01810 ; perimeter
G1 X48.402 Y74.800 E0.01790 ; perimeter
G1 X48.375 Y74.226 E0.02365 ; perimeter
G1 X48.425 Y73.848 E0.01573 ; perimeter
G1 X48.529 Y73.497 E0.01506 ; perimeter
G1 X48.683 Y73.178 E0.01458 ; perimeter
G1 X48.898 Y72.873 E0.01540 ; perimeter
G1 X49.788 Y71.812 E0.05704 ; perimeter
G1 X50.296 Y72.238 E0.02729 ; perimeter
G1 X49.531 Y73.149 E0.04901 ; perimeter
G1 X49.303 Y73.489 E0.01685 ; perimeter
G1 X49.138 Y73.900 E0.01826 ; perimeter
G1 X49.058 Y74.338 E0.01834 ; perimeter
G1 X49.062 Y74.786 E0.01847 ; perimeter
G1 X49.146 Y75.231 E0.01864 ; perimeter
G1 X49.303 Y75.660 E0.01884 ; perimeter
G1 X49.528 Y76.064 E0.01903 ; perimeter
G1 X49.812 Y76.432 E0.01917 ; perimeter
G1 X50.132 Y76.742 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.50356 ; perimeter
G1 X98.620 Y100.203 E0.84571 ; perimeter
G1 X98.620 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.017 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.57547 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03671 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X49.521 Y77.445 E1.51820 ; perimeter
G1 X49.128 Y77.076 E0.02220 ; perimeter
G1 X48.789 Y76.674 E0.02167 ; perimeter
G1 X48.504 Y76.244 E0.02126 ; perimeter
G1 X48.277 Y75.794 E0.02075 ; perimeter
G1 X48.112 Y75.333 E0.02016 ; perimeter
G1 X48.010 Y74.866 E0.01971 ; perimeter
G1 X47.986 Y74.665 E0.00832 ; perimeter
G1 X47.978 Y74.203 E0.01904 ; perimeter
G1 X48.036 Y73.765 E0.01821 ; perimeter
G1 X48.158 Y73.354 E0.01766 ; perimeter
G1 X48.340 Y72.976 E0.01726 ; perimeter
G1 X48.584 Y72.631 E0.01744 ; perimeter
G1 X49.740 Y71.254 E0.07405 ; perimeter
G1 X50.854 Y72.189 E0.05995 ; perimeter
G1 X49.848 Y73.388 E0.06447 ; perimeter
G1 X49.655 Y73.675 E0.01426 ; perimeter
G1 X49.521 Y74.010 E0.01489 ; perimeter
G1 X49.455 Y74.372 E0.01513 ; perimeter
G1 X49.458 Y74.747 E0.01546 ; perimeter
G1 X49.529 Y75.125 E0.01584 ; perimeter
G1 X49.665 Y75.494 E0.01621 ; perimeter
G1 X49.860 Y75.845 E0.01654 ; perimeter
G1 X50.109 Y76.168 E0.01678 ; perimeter
G1 X50.397 Y76.448 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.49703 ; perimeter
G1 X99.016 Y99.806 E0.85608 ; perimeter
G1 X99.017 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X98.617 Y101.126 F10800.000 ; move inwards before travel
G1 F8640
G1 X95.725 Y101.088 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X83.730 Y102.131 ; move to first infill point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.939 Y101.923 E0.01484 ; infill
G1 X83.939 Y101.238 E0.03448 ; infill
G1 X83.246 Y101.931 E0.04931 ; infill
G1 X82.561 Y101.931 E0.03448 ; infill
G1 X83.577 Y100.915 E0.07230 ; infill
G1 X82.892 Y100.915 E0.03448 ; infill
G1 X81.876 Y101.931 E0.07230 ; infill
G1 X81.191 Y101.931 E0.03448 ; infill
G1 X82.207 Y100.915 E0.07230 ; infill
G1 X81.522 Y100.915 E0.03448 ; infill
G1 X80.506 Y101.931 E0.07230 ; infill
G1 X80.256 Y101.931 E0.01260 ; infill
G1 X80.256 Y101.496 E0.02188 ; infill
G1 X81.038 Y100.714 E0.05566 ; infill
G1 F8640
G1 X80.256 Y101.496 E-0.25530 ; wipe and retract
G1 X80.256 Y101.931 E-0.10036 ; wipe and retract
G1 X80.506 Y101.931 E-0.05779 ; wipe and retract
G1 X81.522 Y100.915 E-0.33164 ; wipe and retract
G1 X81.587 Y100.915 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X56.275 Y70.328 ; move to first perimeter point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X53.707 Y68.173 E0.13812 ; perimeter
G1 X51.258 Y71.091 E0.15696 ; perimeter
G1 X50.750 Y70.665 E0.02729 ; perimeter
G1 X59.748 Y59.943 E0.57663 ; perimeter
G1 X60.255 Y60.369 E0.02729 ; perimeter
G1 X57.806 Y63.287 E0.15696 ; perimeter
G1 X60.375 Y65.442 E0.13812 ; perimeter
G1 X60.031 Y65.853 E0.02205 ; perimeter
G1 X57.462 Y63.697 E0.13812 ; perimeter
G1 X54.051 Y67.763 E0.21861 ; perimeter
G1 X56.619 Y69.918 E0.13812 ; perimeter
G1 X56.314 Y70.282 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.324 Y70.886 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X53.756 Y68.731 E0.13812 ; perimeter
G1 X51.307 Y71.650 E0.15696 ; perimeter
G1 X50.192 Y70.714 E0.05995 ; perimeter
G1 X59.699 Y59.384 E0.60929 ; perimeter
G1 X60.814 Y60.320 E0.05995 ; perimeter
G1 X58.365 Y63.239 E0.15696 ; perimeter
G1 X60.933 Y65.394 E0.13812 ; perimeter
G1 X60.079 Y66.411 E0.05471 ; perimeter
G1 X57.511 Y64.256 E0.13812 ; perimeter
G1 X54.609 Y67.714 E0.18596 ; perimeter
G1 X57.178 Y69.869 E0.13812 ; perimeter
G1 X56.363 Y70.840 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.052 Y70.593 F10800.000 ; move inwards before travel
G1 F8640
G1 X53.804 Y68.770 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X98.987 Y81.038 ; move to first perimeter point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.04695 ; perimeter
G1 X97.847 Y76.117 E0.20270 ; perimeter
M73 Q70 S41
G1 X98.987 Y76.117 E0.04695 ; perimeter
G1 X98.987 Y80.978 E0.20022 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.15621 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X64.482 Y59.640 E0.92804 ; perimeter
G1 X64.121 Y59.379 E0.01834 ; perimeter
G1 X63.709 Y59.164 E0.01917 ; perimeter
G1 X63.272 Y59.013 E0.01903 ; perimeter
G1 X62.822 Y58.932 E0.01884 ; perimeter
G1 X62.370 Y58.927 E0.01864 ; perimeter
G1 X61.927 Y59.000 E0.01847 ; perimeter
G1 X61.541 Y59.144 E0.01700 ; perimeter
G1 X61.298 Y59.290 E0.01167 ; perimeter
G1 X60.738 Y58.820 E0.03011 ; perimeter
G1 X61.008 Y58.626 E0.01370 ; perimeter
G1 X61.335 Y58.463 E0.01506 ; perimeter
G1 X61.708 Y58.344 E0.01612 ; perimeter
G1 X62.087 Y58.284 E0.01578 ; perimeter
G1 X62.529 Y58.277 E0.01822 ; perimeter
G1 X63.136 Y58.365 E0.02525 ; perimeter
G1 X63.572 Y58.496 E0.01877 ; perimeter
G1 X64.004 Y58.684 E0.01941 ; perimeter
G1 X64.415 Y58.923 E0.01960 ; perimeter
G1 X64.822 Y59.227 E0.02092 ; perimeter
G1 X81.934 Y73.586 E0.92021 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y75.721 E0.21330 ; perimeter
G1 X99.383 Y75.721 E0.07960 ; perimeter
G1 X99.383 Y81.374 E0.23288 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.17848 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X64.238 Y59.953 E0.93339 ; perimeter
G1 X63.912 Y59.717 E0.01657 ; perimeter
G1 X63.551 Y59.529 E0.01678 ; perimeter
G1 X63.172 Y59.397 E0.01654 ; perimeter
G1 X62.785 Y59.328 E0.01621 ; perimeter
G1 X62.400 Y59.323 E0.01584 ; perimeter
G1 X62.030 Y59.385 E0.01546 ; perimeter
G1 X61.713 Y59.503 E0.01393 ; perimeter
G1 X61.380 Y59.702 E0.01599 ; perimeter
G1 X61.284 Y59.795 E0.00551 ; perimeter
G1 X60.151 Y58.845 E0.06089 ; perimeter
G1 X60.462 Y58.530 E0.01824 ; perimeter
G1 X60.802 Y58.285 E0.01726 ; perimeter
G1 X61.186 Y58.094 E0.01766 ; perimeter
G1 X61.611 Y57.960 E0.01835 ; perimeter
G1 X62.057 Y57.889 E0.01861 ; perimeter
G1 X62.540 Y57.880 E0.01991 ; perimeter
G1 X62.740 Y57.895 E0.00824 ; perimeter
G1 X63.226 Y57.978 E0.02032 ; perimeter
G1 X63.709 Y58.123 E0.02075 ; perimeter
G1 X64.182 Y58.330 E0.02129 ; perimeter
G1 X64.636 Y58.593 E0.02160 ; perimeter
G1 X65.068 Y58.916 E0.02225 ; perimeter
G1 X82.078 Y73.189 E0.91473 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y75.325 E0.21330 ; perimeter
G1 X99.780 Y75.325 E0.11226 ; perimeter
G1 X99.780 Y81.770 E0.26554 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.410 Y81.678 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.488 Y81.816 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X97.968 Y80.922 ; move to first infill point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8054.75
G1 X98.671 Y80.220 E0.04616 ; infill
G1 X98.671 Y79.588 E0.02936 ; infill
G1 X98.163 Y80.095 E0.03335 ; infill
G1 X98.163 Y79.463 E0.02936 ; infill
G1 X98.671 Y78.956 E0.03335 ; infill
G1 X98.671 Y78.324 E0.02936 ; infill
G1 X98.163 Y78.831 E0.03335 ; infill
G1 X98.163 Y78.199 E0.02936 ; infill
G1 X98.671 Y77.691 E0.03335 ; infill
G1 X98.671 Y77.059 E0.02936 ; infill
G1 X98.163 Y77.567 E0.03335 ; infill
G1 X98.163 Y76.935 E0.02936 ; infill
G1 X98.866 Y76.232 E0.04615 ; infill
G1 F8640
G1 X98.163 Y76.935 E-0.22941 ; wipe and retract
G1 X98.163 Y77.567 E-0.14595 ; wipe and retract
G1 X98.671 Y77.059 E-0.16576 ; wipe and retract
G1 X98.671 Y77.691 E-0.14595 ; wipe and retract
G1 X98.448 Y77.915 E-0.07293 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.473 Y87.275 E0.11379 ; perimeter
G1 X76.817 Y86.865 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.11379 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X83.493 Y78.909 E0.11379 ; perimeter
G1 X83.837 Y78.499 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.11379 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.914 Y87.324 E0.11379 ; perimeter
G1 X76.768 Y86.307 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.11379 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.935 Y78.957 E0.11379 ; perimeter
G1 X83.788 Y77.940 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.11379 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.163 Y78.499 E0.11379 ; perimeter
G1 X166.507 Y78.909 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.11379 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.183 Y86.865 E0.11379 ; perimeter
G1 X173.527 Y87.275 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.11379 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X166.212 Y77.940 E0.11379 ; perimeter
G1 X166.830 Y78.677 E0.03961 ; perimeter
G1 X167.065 Y78.957 E0.01510 ; perimeter
G1 X164.949 Y80.733 E0.11379 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X173.232 Y86.307 E0.11379 ; perimeter
G1 X174.086 Y87.324 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.11379 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X151.013 Y81.038 ; move to first perimeter point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y76.117 E0.20270 ; perimeter
G1 X152.153 Y76.117 E0.04695 ; perimeter
G1 X152.153 Y81.038 E0.20270 ; perimeter
G1 X151.073 Y81.038 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.617 Y75.721 E0.23535 ; perimeter
G1 X152.549 Y75.721 E0.07960 ; perimeter
G1 X152.549 Y80.899 E0.21330 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X185.178 Y59.227 E0.92021 ; perimeter
G1 X185.585 Y58.923 E0.02092 ; perimeter
G1 X185.996 Y58.684 E0.01960 ; perimeter
G1 X186.428 Y58.496 E0.01941 ; perimeter
G1 X186.864 Y58.365 E0.01877 ; perimeter
G1 X187.297 Y58.291 E0.01810 ; perimeter
G1 X187.732 Y58.274 E0.01790 ; perimeter
G1 X188.308 Y58.348 E0.02394 ; perimeter
G1 X188.658 Y58.459 E0.01513 ; perimeter
G1 X188.992 Y58.626 E0.01538 ; perimeter
G1 X189.262 Y58.820 E0.01370 ; perimeter
G1 X188.704 Y59.288 E0.03003 ; perimeter
G1 X188.490 Y59.155 E0.01039 ; perimeter
G1 X188.073 Y59.000 E0.01834 ; perimeter
G1 X187.630 Y58.927 E0.01847 ; perimeter
G1 X187.178 Y58.932 E0.01864 ; perimeter
G1 X186.728 Y59.013 E0.01884 ; perimeter
G1 X186.291 Y59.164 E0.01903 ; perimeter
G1 X185.881 Y59.378 E0.01906 ; perimeter
G1 X185.588 Y59.586 E0.01482 ; perimeter
G1 X168.261 Y74.121 E0.93167 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X150.677 Y81.434 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X150.220 Y75.325 E0.26801 ; perimeter
G1 X152.945 Y75.325 E0.11226 ; perimeter
G1 X152.945 Y80.502 E0.21330 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X184.932 Y58.916 E0.91473 ; perimeter
G1 X185.364 Y58.593 E0.02224 ; perimeter
G1 X185.818 Y58.330 E0.02160 ; perimeter
G1 X186.291 Y58.123 E0.02129 ; perimeter
G1 X186.774 Y57.978 E0.02075 ; perimeter
G1 X187.256 Y57.896 E0.02016 ; perimeter
G1 X187.734 Y57.877 E0.01971 ; perimeter
G1 X187.936 Y57.888 E0.00832 ; perimeter
G1 X188.395 Y57.961 E0.01915 ; perimeter
G1 X188.617 Y58.026 E0.00953 ; perimeter
G1 X188.811 Y58.093 E0.00847 ; perimeter
G1 X189.198 Y58.285 E0.01777 ; perimeter
G1 X189.538 Y58.530 E0.01726 ; perimeter
G1 X189.849 Y58.845 E0.01825 ; perimeter
G1 X188.716 Y59.795 E0.06089 ; perimeter
G1 X188.621 Y59.704 E0.00544 ; perimeter
G1 X188.314 Y59.513 E0.01489 ; perimeter
G1 X187.970 Y59.385 E0.01513 ; perimeter
G1 X187.600 Y59.323 E0.01546 ; perimeter
G1 X187.215 Y59.328 E0.01584 ; perimeter
G1 X186.828 Y59.397 E0.01621 ; perimeter
G1 X186.449 Y59.529 E0.01654 ; perimeter
G1 X186.089 Y59.717 E0.01673 ; perimeter
G1 X185.830 Y59.900 E0.01305 ; perimeter
G1 X168.405 Y74.517 E0.93695 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X150.280 Y81.830 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.359 Y81.455 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.250 Y78.539 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X151.134 Y80.922 ; move to first infill point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8054.77
G1 X151.837 Y80.220 E0.04616 ; infill
G1 X151.837 Y79.588 E0.02936 ; infill
G1 X151.329 Y80.095 E0.03335 ; infill
G1 X151.329 Y79.463 E0.02936 ; infill
G1 X151.837 Y78.956 E0.03335 ; infill
G1 X151.837 Y78.324 E0.02936 ; infill
G1 X151.329 Y78.831 E0.03335 ; infill
G1 X151.329 Y78.199 E0.02936 ; infill
G1 X151.837 Y77.691 E0.03335 ; infill
G1 X151.837 Y77.059 E0.02936 ; infill
G1 X151.329 Y77.567 E0.03335 ; infill
G1 X151.329 Y76.935 E0.02936 ; infill
G1 X152.032 Y76.232 E0.04615 ; infill
G1 F8640
G1 X151.329 Y76.935 E-0.22942 ; wipe and retract
G1 X151.329 Y77.567 E-0.14595 ; wipe and retract
G1 X151.837 Y77.059 E-0.16576 ; wipe and retract
G1 X151.837 Y77.691 E-0.14595 ; wipe and retract
G1 X151.613 Y77.915 E-0.07293 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X193.725 Y70.328 ; move to first perimeter point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X193.381 Y69.918 E0.02205 ; perimeter
G1 X195.949 Y67.763 E0.13812 ; perimeter
G1 X192.538 Y63.697 E0.21861 ; perimeter
G1 X189.969 Y65.853 E0.13812 ; perimeter
G1 X189.625 Y65.442 E0.02205 ; perimeter
G1 X192.194 Y63.287 E0.13812 ; perimeter
G1 X189.745 Y60.369 E0.15696 ; perimeter
G1 X190.252 Y59.943 E0.02729 ; perimeter
G1 X199.250 Y70.665 E0.57663 ; perimeter
G1 X198.742 Y71.091 E0.02729 ; perimeter
G1 X196.293 Y68.173 E0.15696 ; perimeter
G1 X193.771 Y70.289 E0.13565 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.676 Y70.886 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X192.822 Y69.869 E0.05471 ; perimeter
G1 X195.391 Y67.714 E0.13812 ; perimeter
G1 X192.489 Y64.256 E0.18596 ; perimeter
G1 X189.921 Y66.411 E0.13812 ; perimeter
G1 X189.067 Y65.394 E0.05471 ; perimeter
G1 X191.635 Y63.239 E0.13812 ; perimeter
G1 X189.186 Y60.320 E0.15696 ; perimeter
G1 X190.301 Y59.384 E0.05995 ; perimeter
G1 X199.808 Y70.714 E0.60929 ; perimeter
G1 X198.693 Y71.650 E0.05995 ; perimeter
G1 X196.244 Y68.731 E0.15696 ; perimeter
G1 X193.722 Y70.848 E0.13565 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.719 Y70.489 F10800.000 ; move inwards before travel
G1 F8640
G1 X192.822 Y69.869 E-0.30695 ; wipe and retract
G1 X194.325 Y68.608 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X151.380 Y100.738 ; move to first perimeter point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X151.380 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E0.84571 ; perimeter
G1 X199.868 Y76.742 E1.50356 ; perimeter
G1 X200.188 Y76.432 E0.01834 ; perimeter
G1 X200.472 Y76.064 E0.01917 ; perimeter
G1 X200.697 Y75.660 E0.01903 ; perimeter
G1 X200.854 Y75.231 E0.01884 ; perimeter
G1 X200.938 Y74.786 E0.01864 ; perimeter
G1 X200.942 Y74.338 E0.01847 ; perimeter
G1 X200.862 Y73.900 E0.01834 ; perimeter
G1 X200.698 Y73.491 E0.01813 ; perimeter
G1 X200.503 Y73.195 E0.01463 ; perimeter
G1 X199.703 Y72.239 E0.05136 ; perimeter
G1 X200.212 Y71.812 E0.02734 ; perimeter
G1 X201.102 Y72.873 E0.05704 ; perimeter
G1 X201.317 Y73.178 E0.01540 ; perimeter
G1 X201.471 Y73.497 E0.01458 ; perimeter
G1 X201.575 Y73.848 E0.01506 ; perimeter
G1 X201.626 Y74.236 E0.01612 ; perimeter
G1 X201.619 Y74.619 E0.01578 ; perimeter
G1 X201.550 Y75.056 E0.01822 ; perimeter
G1 X201.358 Y75.638 E0.02525 ; perimeter
G1 X201.152 Y76.047 E0.01889 ; perimeter
G1 X200.897 Y76.432 E0.01903 ; perimeter
G1 X200.584 Y76.803 E0.01999 ; perimeter
G1 X200.216 Y77.149 E0.02080 ; perimeter
G1 X172.104 Y100.738 E1.51179 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X151.440 Y100.738 E0.57299 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.983 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X150.984 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E0.85608 ; perimeter
G1 X199.603 Y76.448 E1.49703 ; perimeter
G1 X199.891 Y76.168 E0.01657 ; perimeter
G1 X200.140 Y75.845 E0.01678 ; perimeter
G1 X200.335 Y75.494 E0.01654 ; perimeter
G1 X200.471 Y75.125 E0.01621 ; perimeter
G1 X200.542 Y74.747 E0.01584 ; perimeter
G1 X200.545 Y74.372 E0.01546 ; perimeter
G1 X200.479 Y74.010 E0.01513 ; perimeter
G1 X200.345 Y73.676 E0.01484 ; perimeter
G1 X200.184 Y73.432 E0.01205 ; perimeter
G1 X199.145 Y72.189 E0.06672 ; perimeter
G1 X200.261 Y71.254 E0.05997 ; perimeter
G1 X201.416 Y72.631 E0.07405 ; perimeter
G1 X201.660 Y72.976 E0.01744 ; perimeter
G1 X201.842 Y73.354 E0.01726 ; perimeter
G1 X201.964 Y73.765 E0.01766 ; perimeter
G1 X202.022 Y74.207 E0.01835 ; perimeter
G1 X202.015 Y74.658 E0.01861 ; perimeter
G1 X201.939 Y75.136 E0.01991 ; perimeter
G1 X201.889 Y75.330 E0.00824 ; perimeter
G1 X201.723 Y75.794 E0.02032 ; perimeter
G1 X201.496 Y76.245 E0.02079 ; perimeter
G1 X201.212 Y76.673 E0.02115 ; perimeter
G1 X200.872 Y77.076 E0.02174 ; perimeter
G1 X200.479 Y77.445 E0.02220 ; perimeter
G1 X172.248 Y101.134 E1.51820 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X151.043 Y101.134 E0.57300 ; perimeter
M204 S1000 ; adjust acceleration
G1 X151.194 Y100.794 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.984 Y99.806 E-0.30694 ; wipe and retract
G1 X152.946 Y99.806 E-0.45306 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X166.843 Y100.714 ; move to first infill point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.061 Y101.496 E0.05566 ; infill
G1 X166.061 Y101.931 E0.02188 ; infill
G1 X166.312 Y101.931 E0.01260 ; infill
M73 P70 R39
G1 X167.327 Y100.915 E0.07230 ; infill
G1 X168.012 Y100.915 E0.03448 ; infill
G1 X166.996 Y101.931 E0.07230 ; infill
G1 X167.681 Y101.931 E0.03448 ; infill
G1 X168.697 Y100.915 E0.07230 ; infill
G1 X169.382 Y100.915 E0.03448 ; infill
G1 X168.366 Y101.931 E0.07230 ; infill
G1 X169.051 Y101.931 E0.03448 ; infill
G1 X169.744 Y101.238 E0.04931 ; infill
G1 X169.744 Y101.923 E0.03448 ; infill
G1 X169.535 Y102.131 E0.01484 ; infill
G1 F8640
G1 X169.744 Y101.923 E-0.06809 ; wipe and retract
G1 X169.744 Y101.238 E-0.15815 ; wipe and retract
G1 X169.051 Y101.931 E-0.22616 ; wipe and retract
G1 X168.366 Y101.931 E-0.15815 ; wipe and retract
G1 X168.824 Y101.473 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X98.335 Y138.884 ; move to first perimeter point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.57546 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X49.499 Y115.295 E1.51179 ; perimeter
G1 X49.131 Y114.949 E0.02080 ; perimeter
G1 X48.821 Y114.582 E0.01978 ; perimeter
G1 X48.562 Y114.191 E0.01935 ; perimeter
G1 X48.357 Y113.784 E0.01877 ; perimeter
G1 X48.209 Y113.370 E0.01810 ; perimeter
G1 X48.116 Y112.946 E0.01790 ; perimeter
G1 X48.090 Y112.372 E0.02365 ; perimeter
G1 X48.140 Y111.994 E0.01573 ; perimeter
G1 X48.244 Y111.643 E0.01506 ; perimeter
G1 X48.398 Y111.324 E0.01458 ; perimeter
G1 X48.613 Y111.019 E0.01540 ; perimeter
G1 X49.503 Y109.958 E0.05704 ; perimeter
G1 X50.011 Y110.384 E0.02729 ; perimeter
G1 X49.246 Y111.295 E0.04901 ; perimeter
G1 X49.018 Y111.635 E0.01685 ; perimeter
G1 X48.853 Y112.046 E0.01826 ; perimeter
G1 X48.773 Y112.484 E0.01834 ; perimeter
G1 X48.777 Y112.932 E0.01847 ; perimeter
G1 X48.861 Y113.377 E0.01864 ; perimeter
G1 X49.018 Y113.806 E0.01884 ; perimeter
G1 X49.243 Y114.210 E0.01903 ; perimeter
G1 X49.527 Y114.579 E0.01917 ; perimeter
G1 X49.847 Y114.888 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.50356 ; perimeter
G1 X98.335 Y138.349 E0.84571 ; perimeter
G1 X98.335 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X98.731 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.57547 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03671 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X49.235 Y115.592 E1.51820 ; perimeter
G1 X48.843 Y115.222 E0.02220 ; perimeter
G1 X48.504 Y114.821 E0.02167 ; perimeter
G1 X48.218 Y114.390 E0.02126 ; perimeter
G1 X47.992 Y113.940 E0.02075 ; perimeter
G1 X47.827 Y113.480 E0.02016 ; perimeter
G1 X47.725 Y113.012 E0.01971 ; perimeter
G1 X47.701 Y112.812 E0.00832 ; perimeter
G1 X47.693 Y112.349 E0.01904 ; perimeter
G1 X47.751 Y111.911 E0.01821 ; perimeter
G1 X47.873 Y111.500 E0.01766 ; perimeter
G1 X48.055 Y111.123 E0.01726 ; perimeter
G1 X48.299 Y110.777 E0.01744 ; perimeter
G1 X49.454 Y109.400 E0.07405 ; perimeter
G1 X50.569 Y110.335 E0.05995 ; perimeter
G1 X49.563 Y111.534 E0.06447 ; perimeter
G1 X49.370 Y111.821 E0.01426 ; perimeter
G1 X49.235 Y112.157 E0.01489 ; perimeter
G1 X49.169 Y112.518 E0.01513 ; perimeter
G1 X49.173 Y112.893 E0.01546 ; perimeter
G1 X49.244 Y113.271 E0.01584 ; perimeter
G1 X49.380 Y113.641 E0.01621 ; perimeter
G1 X49.575 Y113.991 E0.01654 ; perimeter
G1 X49.823 Y114.314 E0.01678 ; perimeter
G1 X50.112 Y114.594 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.49703 ; perimeter
G1 X98.731 Y137.952 E0.85608 ; perimeter
G1 X98.731 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X98.332 Y139.272 F10800.000 ; move inwards before travel
G1 F8640
G1 X95.440 Y139.235 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X83.445 Y140.278 ; move to first infill point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.654 Y140.069 E0.01484 ; infill
G1 X83.654 Y139.384 E0.03448 ; infill
G1 X82.961 Y140.077 E0.04931 ; infill
G1 X82.276 Y140.077 E0.03448 ; infill
G1 X83.292 Y139.061 E0.07230 ; infill
G1 X82.607 Y139.061 E0.03448 ; infill
G1 X81.591 Y140.077 E0.07230 ; infill
G1 X80.906 Y140.077 E0.03448 ; infill
G1 X81.922 Y139.061 E0.07230 ; infill
G1 X81.237 Y139.061 E0.03448 ; infill
G1 X80.221 Y140.077 E0.07230 ; infill
G1 X79.971 Y140.077 E0.01260 ; infill
G1 X79.971 Y139.642 E0.02188 ; infill
G1 X80.753 Y138.860 E0.05566 ; infill
G1 F8640
G1 X79.971 Y139.642 E-0.25530 ; wipe and retract
G1 X79.971 Y140.077 E-0.10036 ; wipe and retract
G1 X80.221 Y140.077 E-0.05779 ; wipe and retract
G1 X81.237 Y139.061 E-0.33164 ; wipe and retract
G1 X81.301 Y139.061 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X55.990 Y108.474 ; move to first perimeter point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X53.422 Y106.319 E0.13812 ; perimeter
G1 X50.973 Y109.237 E0.15696 ; perimeter
G1 X50.465 Y108.812 E0.02729 ; perimeter
G1 X59.463 Y98.089 E0.57663 ; perimeter
G1 X59.970 Y98.515 E0.02729 ; perimeter
G1 X57.521 Y101.434 E0.15696 ; perimeter
G1 X60.089 Y103.589 E0.13812 ; perimeter
G1 X59.745 Y103.999 E0.02205 ; perimeter
G1 X57.177 Y101.844 E0.13812 ; perimeter
G1 X53.766 Y105.909 E0.21861 ; perimeter
G1 X56.334 Y108.064 E0.13812 ; perimeter
G1 X56.029 Y108.428 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.039 Y109.032 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X53.471 Y106.877 E0.13812 ; perimeter
G1 X51.022 Y109.796 E0.15696 ; perimeter
G1 X49.907 Y108.860 E0.05995 ; perimeter
G1 X59.414 Y97.531 E0.60929 ; perimeter
G1 X60.528 Y98.466 E0.05995 ; perimeter
G1 X58.079 Y101.385 E0.15696 ; perimeter
G1 X60.648 Y103.540 E0.13812 ; perimeter
G1 X59.794 Y104.557 E0.05471 ; perimeter
G1 X57.226 Y102.402 E0.13812 ; perimeter
G1 X54.324 Y105.860 E0.18596 ; perimeter
G1 X56.893 Y108.015 E0.13812 ; perimeter
G1 X56.078 Y108.986 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.767 Y108.739 F10800.000 ; move inwards before travel
G1 F8640
G1 X53.519 Y106.916 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X98.702 Y119.184 ; move to first perimeter point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.04695 ; perimeter
G1 X97.562 Y114.263 E0.20270 ; perimeter
G1 X98.702 Y114.263 E0.04695 ; perimeter
G1 X98.702 Y119.124 E0.20022 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.15621 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X64.197 Y97.787 E0.92804 ; perimeter
G1 X63.836 Y97.526 E0.01834 ; perimeter
G1 X63.424 Y97.310 E0.01917 ; perimeter
G1 X62.987 Y97.159 E0.01903 ; perimeter
G1 X62.537 Y97.078 E0.01884 ; perimeter
G1 X62.085 Y97.073 E0.01864 ; perimeter
G1 X61.642 Y97.146 E0.01847 ; perimeter
G1 X61.255 Y97.290 E0.01700 ; perimeter
G1 X61.012 Y97.436 E0.01167 ; perimeter
G1 X60.453 Y96.966 E0.03011 ; perimeter
G1 X60.723 Y96.772 E0.01370 ; perimeter
G1 X61.050 Y96.609 E0.01506 ; perimeter
G1 X61.423 Y96.491 E0.01612 ; perimeter
G1 X61.801 Y96.431 E0.01578 ; perimeter
G1 X62.244 Y96.423 E0.01822 ; perimeter
G1 X62.850 Y96.511 E0.02525 ; perimeter
G1 X63.287 Y96.642 E0.01877 ; perimeter
G1 X63.719 Y96.830 E0.01941 ; perimeter
G1 X64.130 Y97.070 E0.01960 ; perimeter
G1 X64.537 Y97.373 E0.02092 ; perimeter
G1 X81.649 Y111.732 E0.92021 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y113.867 E0.21330 ; perimeter
G1 X99.098 Y113.867 E0.07960 ; perimeter
G1 X99.098 Y119.520 E0.23288 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.17848 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X63.953 Y98.099 E0.93339 ; perimeter
G1 X63.627 Y97.863 E0.01657 ; perimeter
G1 X63.266 Y97.675 E0.01678 ; perimeter
G1 X62.887 Y97.543 E0.01654 ; perimeter
G1 X62.499 Y97.474 E0.01621 ; perimeter
G1 X62.115 Y97.469 E0.01584 ; perimeter
G1 X61.745 Y97.531 E0.01546 ; perimeter
G1 X61.428 Y97.649 E0.01393 ; perimeter
G1 X61.095 Y97.849 E0.01599 ; perimeter
G1 X60.998 Y97.941 E0.00551 ; perimeter
G1 X59.866 Y96.991 E0.06089 ; perimeter
G1 X60.177 Y96.676 E0.01824 ; perimeter
G1 X60.517 Y96.431 E0.01726 ; perimeter
G1 X60.901 Y96.240 E0.01766 ; perimeter
G1 X61.326 Y96.106 E0.01835 ; perimeter
G1 X61.772 Y96.035 E0.01861 ; perimeter
G1 X62.255 Y96.027 E0.01991 ; perimeter
G1 X62.455 Y96.042 E0.00824 ; perimeter
G1 X62.941 Y96.124 E0.02032 ; perimeter
G1 X63.424 Y96.269 E0.02075 ; perimeter
G1 X63.897 Y96.476 E0.02129 ; perimeter
G1 X64.350 Y96.740 E0.02160 ; perimeter
G1 X64.783 Y97.063 E0.02225 ; perimeter
G1 X81.793 Y111.335 E0.91473 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y113.471 E0.21330 ; perimeter
G1 X99.494 Y113.471 E0.11226 ; perimeter
G1 X99.494 Y119.916 E0.26554 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.125 Y119.824 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.203 Y119.962 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X97.683 Y119.069 ; move to first infill point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8054.75
G1 X98.386 Y118.366 E0.04616 ; infill
G1 X98.386 Y117.734 E0.02936 ; infill
G1 X97.878 Y118.241 E0.03335 ; infill
G1 X97.878 Y117.609 E0.02936 ; infill
G1 X98.386 Y117.102 E0.03335 ; infill
G1 X98.386 Y116.470 E0.02936 ; infill
G1 X97.878 Y116.977 E0.03335 ; infill
G1 X97.878 Y116.345 E0.02936 ; infill
G1 X98.386 Y115.838 E0.03335 ; infill
G1 X98.386 Y115.206 E0.02936 ; infill
G1 X97.878 Y115.713 E0.03335 ; infill
G1 X97.878 Y115.081 E0.02936 ; infill
G1 X98.581 Y114.379 E0.04615 ; infill
G1 F8640
G1 X97.878 Y115.081 E-0.22941 ; wipe and retract
G1 X97.878 Y115.713 E-0.14595 ; wipe and retract
G1 X98.386 Y115.206 E-0.16576 ; wipe and retract
G1 X98.386 Y115.838 E-0.14595 ; wipe and retract
G1 X98.162 Y116.061 E-0.07293 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X76.188 Y125.421 E0.11379 ; perimeter
G1 X76.532 Y125.011 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.11379 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X83.208 Y117.055 E0.11379 ; perimeter
G1 X83.552 Y116.645 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.11379 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.629 Y125.470 E0.11379 ; perimeter
G1 X76.483 Y124.453 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.11379 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X82.650 Y117.104 E0.11379 ; perimeter
G1 X83.503 Y116.086 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.11379 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X165.878 Y116.645 E0.11379 ; perimeter
G1 X166.222 Y117.055 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.11379 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X172.898 Y125.011 E0.11379 ; perimeter
G1 X173.242 Y125.421 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.11379 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X165.926 Y116.086 E0.11379 ; perimeter
G1 X166.544 Y116.823 E0.03961 ; perimeter
G1 X166.780 Y117.104 E0.01510 ; perimeter
G1 X164.664 Y118.879 E0.11379 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X172.947 Y124.453 E0.11379 ; perimeter
G1 X173.801 Y125.470 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.11379 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X150.728 Y119.184 ; move to first perimeter point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y114.263 E0.20270 ; perimeter
G1 X151.868 Y114.263 E0.04695 ; perimeter
G1 X151.868 Y119.184 E0.20270 ; perimeter
G1 X150.788 Y119.184 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.332 Y113.867 E0.23535 ; perimeter
G1 X152.264 Y113.867 E0.07960 ; perimeter
G1 X152.264 Y119.045 E0.21330 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X184.893 Y97.373 E0.92021 ; perimeter
G1 X185.300 Y97.070 E0.02092 ; perimeter
G1 X185.711 Y96.830 E0.01960 ; perimeter
G1 X186.143 Y96.642 E0.01941 ; perimeter
G1 X186.579 Y96.511 E0.01877 ; perimeter
G1 X187.012 Y96.437 E0.01810 ; perimeter
G1 X187.446 Y96.420 E0.01790 ; perimeter
G1 X188.023 Y96.495 E0.02394 ; perimeter
G1 X188.373 Y96.605 E0.01513 ; perimeter
G1 X188.707 Y96.772 E0.01538 ; perimeter
G1 X188.977 Y96.966 E0.01370 ; perimeter
G1 X188.419 Y97.434 E0.03003 ; perimeter
G1 X188.205 Y97.301 E0.01039 ; perimeter
G1 X187.787 Y97.146 E0.01834 ; perimeter
G1 X187.345 Y97.073 E0.01847 ; perimeter
G1 X186.893 Y97.078 E0.01864 ; perimeter
G1 X186.442 Y97.159 E0.01884 ; perimeter
M73 Q71 S40
G1 X186.006 Y97.310 E0.01903 ; perimeter
G1 X185.596 Y97.524 E0.01906 ; perimeter
G1 X185.303 Y97.733 E0.01482 ; perimeter
G1 X167.976 Y112.267 E0.93167 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X150.392 Y119.580 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.935 Y113.471 E0.26801 ; perimeter
G1 X152.660 Y113.471 E0.11226 ; perimeter
G1 X152.660 Y118.648 E0.21330 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X184.646 Y97.063 E0.91473 ; perimeter
G1 X185.079 Y96.740 E0.02224 ; perimeter
G1 X185.532 Y96.476 E0.02160 ; perimeter
G1 X186.006 Y96.269 E0.02129 ; perimeter
G1 X186.489 Y96.124 E0.02075 ; perimeter
G1 X186.971 Y96.042 E0.02016 ; perimeter
G1 X187.449 Y96.023 E0.01971 ; perimeter
G1 X187.651 Y96.034 E0.00832 ; perimeter
G1 X188.110 Y96.107 E0.01915 ; perimeter
G1 X188.332 Y96.172 E0.00953 ; perimeter
G1 X188.526 Y96.239 E0.00847 ; perimeter
G1 X188.912 Y96.431 E0.01777 ; perimeter
G1 X189.253 Y96.676 E0.01726 ; perimeter
G1 X189.563 Y96.991 E0.01825 ; perimeter
G1 X188.431 Y97.941 E0.06089 ; perimeter
G1 X188.336 Y97.850 E0.00544 ; perimeter
G1 X188.029 Y97.659 E0.01489 ; perimeter
G1 X187.685 Y97.531 E0.01513 ; perimeter
G1 X187.315 Y97.469 E0.01546 ; perimeter
G1 X186.930 Y97.474 E0.01584 ; perimeter
G1 X186.543 Y97.543 E0.01621 ; perimeter
G1 X186.163 Y97.675 E0.01654 ; perimeter
G1 X185.804 Y97.863 E0.01673 ; perimeter
G1 X185.545 Y98.046 E0.01305 ; perimeter
G1 X168.120 Y112.663 E0.93695 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X149.995 Y119.976 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.074 Y119.601 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.965 Y116.685 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X150.849 Y119.069 ; move to first infill point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F8054.77
G1 X151.552 Y118.366 E0.04616 ; infill
G1 X151.552 Y117.734 E0.02936 ; infill
G1 X151.044 Y118.241 E0.03335 ; infill
G1 X151.044 Y117.609 E0.02936 ; infill
G1 X151.552 Y117.102 E0.03335 ; infill
G1 X151.552 Y116.470 E0.02936 ; infill
G1 X151.044 Y116.977 E0.03335 ; infill
G1 X151.044 Y116.345 E0.02936 ; infill
G1 X151.552 Y115.838 E0.03335 ; infill
G1 X151.552 Y115.206 E0.02936 ; infill
G1 X151.044 Y115.713 E0.03335 ; infill
G1 X151.044 Y115.081 E0.02936 ; infill
G1 X151.746 Y114.379 E0.04615 ; infill
G1 F8640
G1 X151.044 Y115.081 E-0.22942 ; wipe and retract
G1 X151.044 Y115.713 E-0.14595 ; wipe and retract
G1 X151.552 Y115.206 E-0.16576 ; wipe and retract
G1 X151.552 Y115.838 E-0.14595 ; wipe and retract
G1 X151.328 Y116.061 E-0.07293 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X193.439 Y108.474 ; move to first perimeter point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X193.095 Y108.064 E0.02205 ; perimeter
G1 X195.664 Y105.909 E0.13812 ; perimeter
G1 X192.253 Y101.844 E0.21861 ; perimeter
G1 X189.684 Y103.999 E0.13812 ; perimeter
G1 X189.340 Y103.589 E0.02205 ; perimeter
G1 X191.909 Y101.434 E0.13812 ; perimeter
G1 X189.460 Y98.515 E0.15696 ; perimeter
G1 X189.967 Y98.089 E0.02729 ; perimeter
G1 X198.964 Y108.812 E0.57663 ; perimeter
G1 X198.457 Y109.237 E0.02729 ; perimeter
G1 X196.008 Y106.319 E0.15696 ; perimeter
G1 X193.485 Y108.435 E0.13565 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.391 Y109.032 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X192.537 Y108.015 E0.05471 ; perimeter
G1 X195.105 Y105.860 E0.13812 ; perimeter
G1 X192.204 Y102.402 E0.18596 ; perimeter
G1 X189.635 Y104.557 E0.13812 ; perimeter
G1 X188.782 Y103.540 E0.05471 ; perimeter
G1 X191.350 Y101.385 E0.13812 ; perimeter
G1 X188.901 Y98.466 E0.15696 ; perimeter
G1 X190.016 Y97.531 E0.05995 ; perimeter
G1 X199.523 Y108.860 E0.60929 ; perimeter
G1 X198.408 Y109.796 E0.05995 ; perimeter
G1 X195.959 Y106.877 E0.15696 ; perimeter
G1 X193.437 Y108.994 E0.13565 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.434 Y108.635 F10800.000 ; move inwards before travel
G1 F8640
G1 X192.537 Y108.015 E-0.30695 ; wipe and retract
G1 X194.040 Y106.754 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X151.095 Y138.884 ; move to first perimeter point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X151.095 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E0.84571 ; perimeter
G1 X199.583 Y114.888 E1.50356 ; perimeter
G1 X199.903 Y114.579 E0.01834 ; perimeter
G1 X200.187 Y114.210 E0.01917 ; perimeter
G1 X200.411 Y113.806 E0.01903 ; perimeter
G1 X200.569 Y113.377 E0.01884 ; perimeter
G1 X200.653 Y112.932 E0.01864 ; perimeter
G1 X200.657 Y112.484 E0.01847 ; perimeter
G1 X200.577 Y112.046 E0.01834 ; perimeter
G1 X200.413 Y111.638 E0.01813 ; perimeter
G1 X200.218 Y111.341 E0.01463 ; perimeter
G1 X199.418 Y110.385 E0.05136 ; perimeter
G1 X199.926 Y109.958 E0.02734 ; perimeter
G1 X200.817 Y111.019 E0.05704 ; perimeter
G1 X201.032 Y111.324 E0.01540 ; perimeter
G1 X201.186 Y111.643 E0.01458 ; perimeter
G1 X201.289 Y111.994 E0.01506 ; perimeter
G1 X201.341 Y112.382 E0.01612 ; perimeter
G1 X201.334 Y112.765 E0.01578 ; perimeter
G1 X201.265 Y113.202 E0.01822 ; perimeter
G1 X201.073 Y113.784 E0.02525 ; perimeter
G1 X200.867 Y114.193 E0.01889 ; perimeter
G1 X200.612 Y114.579 E0.01903 ; perimeter
G1 X200.299 Y114.949 E0.01999 ; perimeter
G1 X199.931 Y115.295 E0.02080 ; perimeter
G1 X171.819 Y138.884 E1.51179 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X151.155 Y138.884 E0.57299 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.698 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X150.699 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E0.85608 ; perimeter
G1 X199.317 Y114.594 E1.49703 ; perimeter
G1 X199.606 Y114.314 E0.01657 ; perimeter
G1 X199.855 Y113.991 E0.01678 ; perimeter
G1 X200.050 Y113.641 E0.01654 ; perimeter
G1 X200.186 Y113.271 E0.01621 ; perimeter
G1 X200.257 Y112.893 E0.01584 ; perimeter
G1 X200.260 Y112.518 E0.01546 ; perimeter
G1 X200.194 Y112.157 E0.01513 ; perimeter
G1 X200.060 Y111.822 E0.01484 ; perimeter
G1 X199.899 Y111.578 E0.01205 ; perimeter
G1 X198.860 Y110.335 E0.06672 ; perimeter
G1 X199.975 Y109.400 E0.05997 ; perimeter
G1 X201.131 Y110.777 E0.07405 ; perimeter
G1 X201.375 Y111.123 E0.01744 ; perimeter
G1 X201.557 Y111.500 E0.01726 ; perimeter
G1 X201.678 Y111.911 E0.01766 ; perimeter
G1 X201.737 Y112.353 E0.01835 ; perimeter
G1 X201.729 Y112.805 E0.01861 ; perimeter
G1 X201.653 Y113.282 E0.01991 ; perimeter
G1 X201.604 Y113.476 E0.00824 ; perimeter
G1 X201.438 Y113.940 E0.02032 ; perimeter
G1 X201.211 Y114.391 E0.02079 ; perimeter
G1 X200.927 Y114.819 E0.02115 ; perimeter
G1 X200.587 Y115.222 E0.02174 ; perimeter
G1 X200.194 Y115.592 E0.02220 ; perimeter
G1 X171.963 Y139.280 E1.51820 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X150.758 Y139.280 E0.57300 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.909 Y138.940 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.699 Y137.952 E-0.30694 ; wipe and retract
G1 X152.661 Y137.952 E-0.45306 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
G1 X166.558 Y138.860 ; move to first infill point
G1 Z15.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.776 Y139.642 E0.05566 ; infill
G1 X165.776 Y140.077 E0.02188 ; infill
G1 X166.026 Y140.077 E0.01260 ; infill
G1 X167.042 Y139.061 E0.07230 ; infill
G1 X167.727 Y139.061 E0.03448 ; infill
G1 X166.711 Y140.077 E0.07230 ; infill
G1 X167.396 Y140.077 E0.03448 ; infill
G1 X168.412 Y139.061 E0.07230 ; infill
G1 X169.097 Y139.061 E0.03448 ; infill
G1 X168.081 Y140.077 E0.07230 ; infill
G1 X168.766 Y140.077 E0.03448 ; infill
G1 X169.459 Y139.384 E0.04931 ; infill
G1 X169.459 Y140.069 E0.03448 ; infill
G1 X169.250 Y140.278 E0.01484 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;15.75


G1 F8640
G1 X169.459 Y140.069 E-0.06809 ; wipe and retract
G1 X169.459 Y139.384 E-0.15815 ; wipe and retract
G1 X168.766 Y140.077 E-0.22616 ; wipe and retract
G1 X168.081 Y140.077 E-0.15815 ; wipe and retract
G1 X168.539 Y139.619 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;15.75
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X98.339 Y100.738 ; move to first perimeter point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.56389 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X49.650 Y77.037 E1.51900 ; perimeter
G1 X49.283 Y76.692 E0.02074 ; perimeter
G1 X48.974 Y76.326 E0.01973 ; perimeter
G1 X48.715 Y75.936 E0.01929 ; perimeter
G1 X48.510 Y75.530 E0.01873 ; perimeter
G1 X48.362 Y75.118 E0.01806 ; perimeter
G1 X48.269 Y74.695 E0.01783 ; perimeter
G1 X48.247 Y74.519 E0.00728 ; perimeter
G1 X48.241 Y74.109 E0.01689 ; perimeter
G1 X48.292 Y73.732 E0.01567 ; perimeter
G1 X48.396 Y73.383 E0.01502 ; perimeter
G1 X48.549 Y73.065 E0.01454 ; perimeter
G1 X48.764 Y72.760 E0.01536 ; perimeter
G1 X49.654 Y71.699 E0.05705 ; perimeter
G1 X50.162 Y72.125 E0.02729 ; perimeter
G1 X49.397 Y73.037 E0.04901 ; perimeter
G1 X49.169 Y73.376 E0.01685 ; perimeter
G1 X49.004 Y73.787 E0.01826 ; perimeter
G1 X48.924 Y74.225 E0.01834 ; perimeter
G1 X48.928 Y74.674 E0.01847 ; perimeter
G1 X49.012 Y75.118 E0.01864 ; perimeter
G1 X49.169 Y75.548 E0.01884 ; perimeter
G1 X49.394 Y75.951 E0.01903 ; perimeter
G1 X49.678 Y76.320 E0.01917 ; perimeter
G1 X49.998 Y76.630 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.51077 ; perimeter
G1 X98.336 Y100.203 E0.83403 ; perimeter
G1 X98.339 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X98.737 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.56397 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03671 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X49.386 Y77.333 E1.52541 ; perimeter
G1 X48.995 Y76.965 E0.02213 ; perimeter
G1 X48.657 Y76.564 E0.02161 ; perimeter
G1 X48.372 Y76.135 E0.02121 ; perimeter
G1 X48.145 Y75.687 E0.02070 ; perimeter
G1 X47.980 Y75.228 E0.02011 ; perimeter
G1 X47.878 Y74.761 E0.01966 ; perimeter
G1 X47.851 Y74.546 E0.00893 ; perimeter
G1 X47.845 Y74.086 E0.01897 ; perimeter
G1 X47.903 Y73.649 E0.01816 ; perimeter
G1 X48.025 Y73.239 E0.01761 ; perimeter
G1 X48.206 Y72.863 E0.01721 ; perimeter
G1 X48.450 Y72.518 E0.01739 ; perimeter
G1 X49.605 Y71.141 E0.07405 ; perimeter
G1 X50.720 Y72.076 E0.05995 ; perimeter
G1 X49.714 Y73.275 E0.06447 ; perimeter
G1 X49.521 Y73.563 E0.01426 ; perimeter
G1 X49.386 Y73.898 E0.01489 ; perimeter
G1 X49.320 Y74.259 E0.01513 ; perimeter
G1 X49.324 Y74.635 E0.01546 ; perimeter
G1 X49.395 Y75.013 E0.01584 ; perimeter
G1 X49.531 Y75.382 E0.01621 ; perimeter
G1 X49.726 Y75.733 E0.01654 ; perimeter
G1 X49.975 Y76.055 E0.01678 ; perimeter
G1 X50.263 Y76.335 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.50424 ; perimeter
G1 X98.731 Y99.806 E0.84433 ; perimeter
G1 X98.737 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X98.338 Y101.126 F10800.000 ; move inwards before travel
G1 F8640
G1 X95.446 Y101.089 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X84.140 Y101.697 ; move to first infill point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.358 Y100.915 E0.05567 ; infill
G1 X82.673 Y100.915 E0.03448 ; infill
G1 X83.688 Y101.931 E0.07230 ; infill
G1 X83.003 Y101.931 E0.03448 ; infill
G1 X81.988 Y100.915 E0.07230 ; infill
G1 X81.303 Y100.915 E0.03448 ; infill
G1 X82.318 Y101.931 E0.07230 ; infill
G1 X81.634 Y101.931 E0.03448 ; infill
G1 X80.618 Y100.915 E0.07230 ; infill
G1 X80.256 Y100.915 E0.01821 ; infill
G1 X80.256 Y101.238 E0.01627 ; infill
G1 X80.949 Y101.931 E0.04930 ; infill
G1 X80.264 Y101.931 E0.03448 ; infill
G1 X80.055 Y101.722 E0.01483 ; infill
G1 F8640
G1 X80.264 Y101.931 E-0.06804 ; wipe and retract
G1 X80.949 Y101.931 E-0.15815 ; wipe and retract
G1 X80.256 Y101.238 E-0.22612 ; wipe and retract
G1 X80.256 Y100.915 E-0.07462 ; wipe and retract
G1 X80.618 Y100.915 E-0.08353 ; wipe and retract
G1 X81.076 Y101.373 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X56.136 Y70.211 ; move to first perimeter point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X53.573 Y68.060 E0.13785 ; perimeter
G1 X51.124 Y70.979 E0.15696 ; perimeter
G1 X50.616 Y70.553 E0.02729 ; perimeter
G1 X59.614 Y59.830 E0.57663 ; perimeter
G1 X60.121 Y60.256 E0.02729 ; perimeter
G1 X57.672 Y63.175 E0.15696 ; perimeter
G1 X60.235 Y65.326 E0.13785 ; perimeter
G1 X59.891 Y65.736 E0.02205 ; perimeter
G1 X57.328 Y63.585 E0.13785 ; perimeter
G1 X53.917 Y67.650 E0.21861 ; perimeter
G1 X56.480 Y69.801 E0.13785 ; perimeter
G1 X56.175 Y70.165 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.185 Y70.769 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X53.622 Y68.619 E0.13785 ; perimeter
G1 X51.173 Y71.537 E0.15696 ; perimeter
G1 X50.058 Y70.602 E0.05995 ; perimeter
G1 X59.565 Y59.272 E0.60929 ; perimeter
G1 X60.680 Y60.207 E0.05995 ; perimeter
G1 X58.231 Y63.126 E0.15696 ; perimeter
G1 X60.794 Y65.277 E0.13785 ; perimeter
G1 X59.940 Y66.294 E0.05471 ; perimeter
G1 X57.377 Y64.143 E0.13785 ; perimeter
G1 X54.475 Y67.601 E0.18596 ; perimeter
G1 X57.039 Y69.752 E0.13785 ; perimeter
G1 X56.224 Y70.723 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.913 Y70.476 F10800.000 ; move inwards before travel
G1 F8640
G1 X53.665 Y68.653 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X98.987 Y81.038 ; move to first perimeter point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.04695 ; perimeter
G1 X97.847 Y75.942 E0.20991 ; perimeter
G1 X98.987 Y75.942 E0.04695 ; perimeter
G1 X98.987 Y80.978 E0.20743 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.15621 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X64.348 Y59.528 E0.93525 ; perimeter
G1 X63.987 Y59.267 E0.01834 ; perimeter
G1 X63.575 Y59.051 E0.01917 ; perimeter
G1 X63.138 Y58.900 E0.01903 ; perimeter
G1 X62.688 Y58.819 E0.01884 ; perimeter
G1 X62.236 Y58.814 E0.01864 ; perimeter
G1 X61.793 Y58.888 E0.01847 ; perimeter
G1 X61.426 Y59.024 E0.01614 ; perimeter
G1 X61.164 Y59.178 E0.01250 ; perimeter
G1 X60.604 Y58.707 E0.03016 ; perimeter
G1 X60.872 Y58.514 E0.01362 ; perimeter
G1 X61.198 Y58.351 E0.01502 ; perimeter
G1 X61.569 Y58.233 E0.01604 ; perimeter
G1 X61.946 Y58.172 E0.01573 ; perimeter
G1 X62.387 Y58.164 E0.01815 ; perimeter
G1 X63.006 Y58.254 E0.02579 ; perimeter
G1 X63.442 Y58.385 E0.01873 ; perimeter
G1 X63.872 Y58.573 E0.01936 ; perimeter
G1 X64.282 Y58.812 E0.01954 ; perimeter
G1 X64.688 Y59.115 E0.02086 ; perimeter
G1 X81.934 Y73.586 E0.92742 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y75.546 E0.22051 ; perimeter
G1 X99.383 Y75.546 E0.07960 ; perimeter
G1 X99.383 Y81.374 E0.24009 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.17848 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X64.104 Y59.841 E0.94061 ; perimeter
G1 X63.778 Y59.605 E0.01657 ; perimeter
G1 X63.417 Y59.416 E0.01678 ; perimeter
G1 X63.038 Y59.285 E0.01654 ; perimeter
G1 X62.651 Y59.215 E0.01621 ; perimeter
G1 X62.266 Y59.211 E0.01584 ; perimeter
G1 X61.896 Y59.273 E0.01546 ; perimeter
G1 X61.597 Y59.384 E0.01315 ; perimeter
G1 X61.247 Y59.589 E0.01672 ; perimeter
G1 X61.150 Y59.683 E0.00555 ; perimeter
G1 X60.017 Y58.733 E0.06089 ; perimeter
G1 X60.327 Y58.418 E0.01820 ; perimeter
G1 X60.666 Y58.174 E0.01721 ; perimeter
G1 X61.049 Y57.983 E0.01761 ; perimeter
G1 X61.472 Y57.848 E0.01829 ; perimeter
M73 P71 R38
G1 X61.916 Y57.777 E0.01855 ; perimeter
G1 X62.398 Y57.768 E0.01984 ; perimeter
G1 X62.613 Y57.784 E0.00888 ; perimeter
G1 X63.098 Y57.867 E0.02027 ; perimeter
G1 X63.579 Y58.012 E0.02070 ; perimeter
G1 X64.051 Y58.219 E0.02123 ; perimeter
G1 X64.503 Y58.482 E0.02154 ; perimeter
G1 X64.934 Y58.804 E0.02218 ; perimeter
G1 X82.078 Y73.189 E0.92194 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y75.150 E0.22051 ; perimeter
G1 X99.780 Y75.150 E0.11226 ; perimeter
G1 X99.780 Y81.770 E0.27275 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.410 Y81.677 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.488 Y81.816 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X97.962 Y79.990 ; move to first infill point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7814.3
G1 X98.671 Y80.698 E0.04798 ; infill
G1 X98.671 Y80.047 E0.03120 ; infill
G1 X98.163 Y79.539 E0.03437 ; infill
G1 X98.163 Y78.888 E0.03120 ; infill
G1 X98.671 Y79.395 E0.03437 ; infill
G1 X98.671 Y78.744 E0.03120 ; infill
G1 X98.163 Y78.236 E0.03437 ; infill
G1 X98.163 Y77.585 E0.03120 ; infill
G1 X98.671 Y78.092 E0.03437 ; infill
G1 X98.671 Y77.441 E0.03120 ; infill
G1 X98.163 Y76.933 E0.03437 ; infill
G1 X98.163 Y76.282 E0.03120 ; infill
G1 X98.872 Y76.990 E0.04798 ; infill
G1 F8640
G1 X98.163 Y76.282 E-0.23135 ; wipe and retract
G1 X98.163 Y76.933 E-0.15044 ; wipe and retract
G1 X98.671 Y77.441 E-0.16576 ; wipe and retract
G1 X98.671 Y78.092 E-0.15044 ; wipe and retract
G1 X98.481 Y77.902 E-0.06201 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.535 Y87.328 E0.11044 ; perimeter
G1 X76.879 Y86.917 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.11044 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X83.555 Y78.961 E0.11044 ; perimeter
G1 X83.900 Y78.551 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.11044 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X75.977 Y87.376 E0.11044 ; perimeter
G1 X76.830 Y86.359 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.11044 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X82.997 Y79.010 E0.11044 ; perimeter
G1 X83.851 Y77.992 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.11044 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.100 Y78.551 E0.11044 ; perimeter
G1 X166.445 Y78.961 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.11044 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.121 Y86.917 E0.11044 ; perimeter
G1 X173.465 Y87.328 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.11044 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X166.149 Y77.992 E0.11044 ; perimeter
G1 X167.003 Y79.010 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.11044 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X173.170 Y86.359 E0.11044 ; perimeter
G1 X174.023 Y87.376 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.11044 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X151.013 Y81.038 ; move to first perimeter point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y75.942 E0.20991 ; perimeter
G1 X152.153 Y75.942 E0.04695 ; perimeter
G1 X152.153 Y81.038 E0.20991 ; perimeter
G1 X151.073 Y81.038 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.617 Y75.546 E0.24256 ; perimeter
G1 X152.549 Y75.546 E0.07960 ; perimeter
G1 X152.549 Y80.899 E0.22051 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X185.312 Y59.115 E0.92742 ; perimeter
G1 X185.718 Y58.812 E0.02086 ; perimeter
G1 X186.128 Y58.573 E0.01954 ; perimeter
G1 X186.558 Y58.385 E0.01936 ; perimeter
G1 X186.994 Y58.254 E0.01873 ; perimeter
G1 X187.425 Y58.179 E0.01806 ; perimeter
G1 X187.858 Y58.161 E0.01783 ; perimeter
G1 X188.035 Y58.171 E0.00728 ; perimeter
G1 X188.447 Y58.237 E0.01719 ; perimeter
G1 X188.795 Y58.348 E0.01508 ; perimeter
G1 X189.128 Y58.514 E0.01531 ; perimeter
G1 X189.396 Y58.707 E0.01362 ; perimeter
G1 X188.838 Y59.176 E0.03003 ; perimeter
G1 X188.624 Y59.043 E0.01039 ; perimeter
G1 X188.207 Y58.888 E0.01834 ; perimeter
G1 X187.764 Y58.814 E0.01847 ; perimeter
G1 X187.312 Y58.819 E0.01864 ; perimeter
G1 X186.862 Y58.900 E0.01884 ; perimeter
G1 X186.425 Y59.051 E0.01903 ; perimeter
G1 X186.015 Y59.266 E0.01906 ; perimeter
G1 X185.718 Y59.477 E0.01501 ; perimeter
G1 X168.261 Y74.121 E0.93868 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X150.677 Y81.434 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X150.220 Y75.150 E0.27522 ; perimeter
G1 X152.945 Y75.150 E0.11226 ; perimeter
G1 X152.945 Y80.502 E0.22051 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X185.066 Y58.804 E0.92194 ; perimeter
G1 X185.497 Y58.482 E0.02218 ; perimeter
G1 X185.949 Y58.219 E0.02154 ; perimeter
G1 X186.421 Y58.012 E0.02123 ; perimeter
G1 X186.902 Y57.867 E0.02070 ; perimeter
G1 X187.383 Y57.784 E0.02011 ; perimeter
G1 X187.860 Y57.764 E0.01966 ; perimeter
G1 X188.077 Y57.776 E0.00893 ; perimeter
G1 X188.534 Y57.850 E0.01908 ; perimeter
G1 X188.741 Y57.910 E0.00889 ; perimeter
G1 X188.949 Y57.982 E0.00905 ; perimeter
G1 X189.334 Y58.174 E0.01771 ; perimeter
G1 X189.673 Y58.418 E0.01721 ; perimeter
G1 X189.983 Y58.733 E0.01820 ; perimeter
G1 X188.851 Y59.683 E0.06089 ; perimeter
G1 X188.755 Y59.591 E0.00544 ; perimeter
G1 X188.449 Y59.400 E0.01489 ; perimeter
G1 X188.104 Y59.273 E0.01513 ; perimeter
G1 X187.734 Y59.211 E0.01546 ; perimeter
G1 X187.349 Y59.215 E0.01584 ; perimeter
G1 X186.962 Y59.285 E0.01621 ; perimeter
G1 X186.583 Y59.416 E0.01654 ; perimeter
G1 X186.223 Y59.604 E0.01674 ; perimeter
G1 X185.961 Y59.791 E0.01325 ; perimeter
G1 X168.405 Y74.517 E0.94397 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X150.280 Y81.830 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.359 Y81.455 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.251 Y78.539 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X151.128 Y79.990 ; move to first infill point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7814.3
G1 X151.837 Y80.698 E0.04798 ; infill
G1 X151.837 Y80.047 E0.03120 ; infill
G1 X151.329 Y79.539 E0.03437 ; infill
G1 X151.329 Y78.888 E0.03120 ; infill
G1 X151.837 Y79.395 E0.03437 ; infill
G1 X151.837 Y78.744 E0.03120 ; infill
G1 X151.329 Y78.236 E0.03437 ; infill
G1 X151.329 Y77.585 E0.03120 ; infill
G1 X151.837 Y78.092 E0.03437 ; infill
G1 X151.837 Y77.441 E0.03120 ; infill
G1 X151.329 Y76.933 E0.03437 ; infill
G1 X151.329 Y76.282 E0.03120 ; infill
G1 X152.038 Y76.990 E0.04798 ; infill
G1 F8640
G1 X151.329 Y76.282 E-0.23135 ; wipe and retract
G1 X151.329 Y76.933 E-0.15044 ; wipe and retract
G1 X151.837 Y77.441 E-0.16576 ; wipe and retract
G1 X151.837 Y78.092 E-0.15044 ; wipe and retract
G1 X151.647 Y77.902 E-0.06202 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X193.864 Y70.211 ; move to first perimeter point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X193.520 Y69.801 E0.02205 ; perimeter
G1 X196.083 Y67.650 E0.13785 ; perimeter
G1 X192.672 Y63.585 E0.21861 ; perimeter
G1 X190.109 Y65.736 E0.13785 ; perimeter
G1 X189.765 Y65.326 E0.02205 ; perimeter
G1 X192.328 Y63.175 E0.13785 ; perimeter
G1 X189.879 Y60.256 E0.15696 ; perimeter
G1 X190.386 Y59.830 E0.02729 ; perimeter
G1 X199.384 Y70.553 E0.57663 ; perimeter
G1 X198.876 Y70.979 E0.02729 ; perimeter
G1 X196.427 Y68.060 E0.15696 ; perimeter
G1 X193.910 Y70.172 E0.13538 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.815 Y70.769 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X192.961 Y69.752 E0.05471 ; perimeter
G1 X195.525 Y67.601 E0.13785 ; perimeter
G1 X192.623 Y64.143 E0.18596 ; perimeter
G1 X190.060 Y66.294 E0.13785 ; perimeter
G1 X189.206 Y65.277 E0.05471 ; perimeter
G1 X191.769 Y63.126 E0.13785 ; perimeter
G1 X189.320 Y60.207 E0.15696 ; perimeter
G1 X190.435 Y59.272 E0.05995 ; perimeter
G1 X199.942 Y70.602 E0.60929 ; perimeter
G1 X198.827 Y71.537 E0.05995 ; perimeter
G1 X196.378 Y68.619 E0.15696 ; perimeter
G1 X193.861 Y70.731 E0.13538 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.858 Y70.372 F10800.000 ; move inwards before travel
G1 F8640
G1 X192.961 Y69.752 E-0.30695 ; wipe and retract
G1 X194.464 Y68.491 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X151.661 Y100.738 ; move to first perimeter point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X151.664 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E0.83403 ; perimeter
G1 X200.002 Y76.630 E1.51077 ; perimeter
G1 X200.322 Y76.320 E0.01834 ; perimeter
G1 X200.606 Y75.951 E0.01917 ; perimeter
G1 X200.831 Y75.548 E0.01903 ; perimeter
G1 X200.988 Y75.118 E0.01884 ; perimeter
G1 X201.072 Y74.674 E0.01864 ; perimeter
G1 X201.076 Y74.225 E0.01847 ; perimeter
G1 X200.996 Y73.787 E0.01834 ; perimeter
G1 X200.832 Y73.379 E0.01814 ; perimeter
G1 X200.635 Y73.080 E0.01476 ; perimeter
G1 X199.837 Y72.126 E0.05121 ; perimeter
G1 X200.346 Y71.699 E0.02734 ; perimeter
G1 X201.236 Y72.760 E0.05705 ; perimeter
G1 X201.451 Y73.065 E0.01536 ; perimeter
G1 X201.604 Y73.383 E0.01454 ; perimeter
G1 X201.708 Y73.732 E0.01502 ; perimeter
G1 X201.760 Y74.118 E0.01604 ; perimeter
G1 X201.754 Y74.500 E0.01573 ; perimeter
G1 X201.686 Y74.935 E0.01815 ; perimeter
G1 X201.490 Y75.530 E0.02579 ; perimeter
G1 X201.284 Y75.939 E0.01885 ; perimeter
G1 X201.029 Y76.322 E0.01898 ; perimeter
G1 X200.717 Y76.692 E0.01992 ; perimeter
G1 X200.350 Y77.037 E0.02074 ; perimeter
G1 X172.104 Y100.738 E1.51900 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X151.721 Y100.738 E0.56141 ; perimeter
M204 S1000 ; adjust acceleration
G1 X151.263 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X151.269 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E0.84433 ; perimeter
G1 X199.737 Y76.335 E1.50424 ; perimeter
G1 X200.025 Y76.055 E0.01657 ; perimeter
G1 X200.274 Y75.733 E0.01678 ; perimeter
G1 X200.469 Y75.382 E0.01654 ; perimeter
G1 X200.605 Y75.013 E0.01621 ; perimeter
G1 X200.676 Y74.635 E0.01584 ; perimeter
G1 X200.680 Y74.259 E0.01546 ; perimeter
G1 X200.614 Y73.898 E0.01513 ; perimeter
G1 X200.479 Y73.564 E0.01485 ; perimeter
G1 X200.316 Y73.316 E0.01219 ; perimeter
G1 X199.280 Y72.077 E0.06658 ; perimeter
G1 X200.395 Y71.141 E0.05997 ; perimeter
G1 X201.550 Y72.518 E0.07405 ; perimeter
G1 X201.794 Y72.863 E0.01739 ; perimeter
G1 X201.975 Y73.239 E0.01721 ; perimeter
G1 X202.097 Y73.649 E0.01761 ; perimeter
G1 X202.156 Y74.089 E0.01829 ; perimeter
G1 X202.149 Y74.539 E0.01855 ; perimeter
G1 X202.074 Y75.015 E0.01984 ; perimeter
G1 X202.021 Y75.224 E0.00888 ; perimeter
G1 X201.855 Y75.687 E0.02027 ; perimeter
G1 X201.628 Y76.136 E0.02075 ; perimeter
G1 X201.345 Y76.563 E0.02109 ; perimeter
G1 X201.005 Y76.965 E0.02167 ; perimeter
G1 X200.614 Y77.333 E0.02213 ; perimeter
G1 X172.248 Y101.134 E1.52541 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X151.323 Y101.134 E0.56150 ; perimeter
M204 S1000 ; adjust acceleration
G1 X151.474 Y100.795 F10800.000 ; move inwards before travel
G1 F8640
G1 X151.269 Y99.806 E-0.30689 ; wipe and retract
G1 X153.232 Y99.806 E-0.45311 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X165.860 Y101.722 ; move to first infill point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.069 Y101.931 E0.01484 ; infill
G1 X166.754 Y101.931 E0.03448 ; infill
G1 X166.061 Y101.238 E0.04930 ; infill
G1 X166.061 Y100.915 E0.01627 ; infill
G1 X166.423 Y100.915 E0.01821 ; infill
G1 X167.439 Y101.931 E0.07230 ; infill
G1 X168.124 Y101.931 E0.03448 ; infill
G1 X167.108 Y100.915 E0.07230 ; infill
G1 X167.793 Y100.915 E0.03448 ; infill
G1 X168.808 Y101.931 E0.07230 ; infill
G1 X169.493 Y101.931 E0.03448 ; infill
G1 X168.478 Y100.915 E0.07230 ; infill
M73 Q72 S39
G1 X169.163 Y100.915 E0.03448 ; infill
G1 X169.945 Y101.697 E0.05567 ; infill
G1 F8640
G1 X169.163 Y100.915 E-0.25535 ; wipe and retract
G1 X168.478 Y100.915 E-0.15815 ; wipe and retract
G1 X169.493 Y101.931 E-0.33164 ; wipe and retract
G1 X169.429 Y101.931 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X98.054 Y138.884 ; move to first perimeter point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.56389 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X49.365 Y115.183 E1.51900 ; perimeter
G1 X48.998 Y114.838 E0.02074 ; perimeter
G1 X48.689 Y114.472 E0.01973 ; perimeter
G1 X48.430 Y114.082 E0.01929 ; perimeter
G1 X48.225 Y113.676 E0.01873 ; perimeter
G1 X48.076 Y113.264 E0.01806 ; perimeter
G1 X47.984 Y112.841 E0.01783 ; perimeter
G1 X47.962 Y112.665 E0.00728 ; perimeter
G1 X47.956 Y112.255 E0.01689 ; perimeter
G1 X48.007 Y111.878 E0.01567 ; perimeter
G1 X48.110 Y111.529 E0.01502 ; perimeter
G1 X48.264 Y111.211 E0.01454 ; perimeter
G1 X48.479 Y110.906 E0.01536 ; perimeter
G1 X49.369 Y109.846 E0.05705 ; perimeter
G1 X49.877 Y110.271 E0.02729 ; perimeter
G1 X49.112 Y111.183 E0.04901 ; perimeter
G1 X48.884 Y111.522 E0.01685 ; perimeter
G1 X48.719 Y111.933 E0.01826 ; perimeter
G1 X48.639 Y112.371 E0.01834 ; perimeter
G1 X48.643 Y112.820 E0.01847 ; perimeter
G1 X48.727 Y113.264 E0.01864 ; perimeter
G1 X48.884 Y113.694 E0.01884 ; perimeter
G1 X49.109 Y114.097 E0.01903 ; perimeter
G1 X49.393 Y114.466 E0.01917 ; perimeter
G1 X49.713 Y114.776 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.51077 ; perimeter
G1 X98.051 Y138.349 E0.83403 ; perimeter
G1 X98.054 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X98.452 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.56397 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03671 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X49.101 Y115.479 E1.52541 ; perimeter
G1 X48.710 Y115.111 E0.02213 ; perimeter
G1 X48.371 Y114.710 E0.02161 ; perimeter
G1 X48.086 Y114.282 E0.02121 ; perimeter
G1 X47.860 Y113.833 E0.02070 ; perimeter
G1 X47.695 Y113.374 E0.02011 ; perimeter
G1 X47.592 Y112.908 E0.01966 ; perimeter
G1 X47.566 Y112.692 E0.00893 ; perimeter
G1 X47.559 Y112.232 E0.01897 ; perimeter
G1 X47.618 Y111.795 E0.01816 ; perimeter
G1 X47.740 Y111.385 E0.01761 ; perimeter
G1 X47.921 Y111.009 E0.01721 ; perimeter
G1 X48.165 Y110.664 E0.01739 ; perimeter
G1 X49.320 Y109.287 E0.07405 ; perimeter
G1 X50.435 Y110.223 E0.05995 ; perimeter
G1 X49.429 Y111.421 E0.06447 ; perimeter
G1 X49.236 Y111.709 E0.01426 ; perimeter
G1 X49.101 Y112.044 E0.01489 ; perimeter
G1 X49.035 Y112.405 E0.01513 ; perimeter
G1 X49.039 Y112.781 E0.01546 ; perimeter
G1 X49.110 Y113.159 E0.01584 ; perimeter
G1 X49.246 Y113.528 E0.01621 ; perimeter
G1 X49.441 Y113.879 E0.01654 ; perimeter
G1 X49.689 Y114.201 E0.01678 ; perimeter
G1 X49.978 Y114.481 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.50424 ; perimeter
G1 X98.446 Y137.952 E0.84433 ; perimeter
G1 X98.452 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X98.052 Y139.272 F10800.000 ; move inwards before travel
G1 F8640
G1 X95.161 Y139.235 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X83.854 Y139.843 ; move to first infill point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.072 Y139.061 E0.05567 ; infill
G1 X82.388 Y139.061 E0.03448 ; infill
G1 X83.403 Y140.077 E0.07230 ; infill
G1 X82.718 Y140.077 E0.03448 ; infill
G1 X81.703 Y139.061 E0.07230 ; infill
G1 X81.018 Y139.061 E0.03448 ; infill
G1 X82.033 Y140.077 E0.07230 ; infill
G1 X81.348 Y140.077 E0.03448 ; infill
G1 X80.333 Y139.061 E0.07230 ; infill
G1 X79.971 Y139.061 E0.01821 ; infill
G1 X79.971 Y139.384 E0.01627 ; infill
G1 X80.663 Y140.077 E0.04930 ; infill
G1 X79.978 Y140.077 E0.03448 ; infill
G1 X79.770 Y139.868 E0.01483 ; infill
G1 F8640
G1 X79.978 Y140.077 E-0.06804 ; wipe and retract
G1 X80.663 Y140.077 E-0.15815 ; wipe and retract
G1 X79.971 Y139.384 E-0.22612 ; wipe and retract
G1 X79.971 Y139.061 E-0.07462 ; wipe and retract
G1 X80.333 Y139.061 E-0.08353 ; wipe and retract
G1 X80.791 Y139.519 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X55.851 Y108.357 ; move to first perimeter point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X53.288 Y106.206 E0.13785 ; perimeter
G1 X50.839 Y109.125 E0.15696 ; perimeter
G1 X50.331 Y108.699 E0.02729 ; perimeter
G1 X59.328 Y97.976 E0.57663 ; perimeter
G1 X59.836 Y98.402 E0.02729 ; perimeter
G1 X57.387 Y101.321 E0.15696 ; perimeter
G1 X59.950 Y103.472 E0.13785 ; perimeter
G1 X59.606 Y103.882 E0.02205 ; perimeter
G1 X57.043 Y101.731 E0.13785 ; perimeter
G1 X53.632 Y105.796 E0.21861 ; perimeter
G1 X56.195 Y107.947 E0.13785 ; perimeter
G1 X55.890 Y108.311 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.900 Y108.916 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X53.337 Y106.765 E0.13785 ; perimeter
G1 X50.888 Y109.683 E0.15696 ; perimeter
G1 X49.773 Y108.748 E0.05995 ; perimeter
G1 X59.280 Y97.418 E0.60929 ; perimeter
G1 X60.394 Y98.354 E0.05995 ; perimeter
G1 X57.945 Y101.272 E0.15696 ; perimeter
G1 X60.509 Y103.423 E0.13785 ; perimeter
G1 X59.655 Y104.440 E0.05471 ; perimeter
G1 X57.092 Y102.289 E0.13785 ; perimeter
G1 X54.190 Y105.747 E0.18596 ; perimeter
G1 X56.754 Y107.898 E0.13785 ; perimeter
G1 X55.938 Y108.870 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.628 Y108.622 F10800.000 ; move inwards before travel
G1 F8640
G1 X53.380 Y106.799 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X98.702 Y119.184 ; move to first perimeter point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.04695 ; perimeter
G1 X97.562 Y114.088 E0.20991 ; perimeter
G1 X98.702 Y114.088 E0.04695 ; perimeter
G1 X98.702 Y119.124 E0.20743 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.15621 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X64.063 Y97.674 E0.93525 ; perimeter
G1 X63.702 Y97.413 E0.01834 ; perimeter
G1 X63.290 Y97.197 E0.01917 ; perimeter
G1 X62.853 Y97.046 E0.01903 ; perimeter
G1 X62.403 Y96.966 E0.01884 ; perimeter
G1 X61.950 Y96.960 E0.01864 ; perimeter
G1 X61.508 Y97.034 E0.01847 ; perimeter
G1 X61.141 Y97.170 E0.01614 ; perimeter
G1 X60.879 Y97.324 E0.01250 ; perimeter
G1 X60.318 Y96.853 E0.03016 ; perimeter
G1 X60.587 Y96.660 E0.01362 ; perimeter
G1 X60.913 Y96.497 E0.01502 ; perimeter
G1 X61.284 Y96.379 E0.01604 ; perimeter
G1 X61.661 Y96.319 E0.01573 ; perimeter
G1 X62.102 Y96.310 E0.01815 ; perimeter
G1 X62.721 Y96.400 E0.02579 ; perimeter
G1 X63.156 Y96.531 E0.01873 ; perimeter
G1 X63.587 Y96.719 E0.01936 ; perimeter
G1 X63.997 Y96.958 E0.01954 ; perimeter
G1 X64.403 Y97.261 E0.02086 ; perimeter
G1 X81.649 Y111.732 E0.92742 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y113.692 E0.22051 ; perimeter
G1 X99.098 Y113.692 E0.07960 ; perimeter
G1 X99.098 Y119.520 E0.24009 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.17848 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X63.819 Y97.987 E0.94061 ; perimeter
G1 X63.493 Y97.751 E0.01657 ; perimeter
G1 X63.132 Y97.562 E0.01678 ; perimeter
G1 X62.753 Y97.431 E0.01654 ; perimeter
G1 X62.365 Y97.361 E0.01621 ; perimeter
G1 X61.981 Y97.357 E0.01584 ; perimeter
G1 X61.611 Y97.419 E0.01546 ; perimeter
G1 X61.311 Y97.530 E0.01315 ; perimeter
G1 X60.961 Y97.735 E0.01672 ; perimeter
G1 X60.864 Y97.829 E0.00555 ; perimeter
G1 X59.732 Y96.879 E0.06089 ; perimeter
G1 X60.042 Y96.564 E0.01820 ; perimeter
G1 X60.381 Y96.320 E0.01721 ; perimeter
G1 X60.763 Y96.129 E0.01761 ; perimeter
G1 X61.187 Y95.994 E0.01829 ; perimeter
G1 X61.631 Y95.923 E0.01855 ; perimeter
G1 X62.113 Y95.914 E0.01984 ; perimeter
G1 X62.328 Y95.930 E0.00888 ; perimeter
G1 X62.813 Y96.013 E0.02027 ; perimeter
G1 X63.294 Y96.159 E0.02070 ; perimeter
G1 X63.766 Y96.365 E0.02123 ; perimeter
G1 X64.218 Y96.628 E0.02154 ; perimeter
G1 X64.649 Y96.950 E0.02218 ; perimeter
G1 X81.793 Y111.335 E0.92194 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y113.296 E0.22051 ; perimeter
G1 X99.494 Y113.296 E0.11226 ; perimeter
G1 X99.494 Y119.916 E0.27275 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.125 Y119.823 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.203 Y119.962 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X97.677 Y118.136 ; move to first infill point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7814.3
G1 X98.386 Y118.844 E0.04798 ; infill
G1 X98.386 Y118.193 E0.03120 ; infill
G1 X97.878 Y117.685 E0.03437 ; infill
G1 X97.878 Y117.034 E0.03120 ; infill
G1 X98.386 Y117.541 E0.03437 ; infill
G1 X98.386 Y116.890 E0.03120 ; infill
G1 X97.878 Y116.382 E0.03437 ; infill
G1 X97.878 Y115.731 E0.03120 ; infill
G1 X98.386 Y116.238 E0.03437 ; infill
G1 X98.386 Y115.587 E0.03120 ; infill
G1 X97.878 Y115.079 E0.03437 ; infill
G1 X97.878 Y114.428 E0.03120 ; infill
G1 X98.587 Y115.136 E0.04798 ; infill
G1 F8640
G1 X97.878 Y114.428 E-0.23135 ; wipe and retract
G1 X97.878 Y115.079 E-0.15044 ; wipe and retract
G1 X98.386 Y115.587 E-0.16576 ; wipe and retract
G1 X98.386 Y116.238 E-0.15044 ; wipe and retract
G1 X98.196 Y116.048 E-0.06201 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X76.250 Y125.474 E0.11044 ; perimeter
G1 X76.594 Y125.064 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.11044 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X83.270 Y117.107 E0.11044 ; perimeter
G1 X83.614 Y116.697 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.11044 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.691 Y125.523 E0.11044 ; perimeter
G1 X76.545 Y124.505 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.11044 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X82.712 Y117.156 E0.11044 ; perimeter
G1 X83.565 Y116.139 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.11044 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X165.815 Y116.697 E0.11044 ; perimeter
G1 X166.159 Y117.107 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.11044 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X172.836 Y125.064 E0.11044 ; perimeter
G1 X173.180 Y125.474 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.11044 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X165.864 Y116.139 E0.11044 ; perimeter
G1 X166.718 Y117.156 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.11044 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X172.885 Y124.505 E0.11044 ; perimeter
G1 X173.738 Y125.523 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.11044 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X150.728 Y119.184 ; move to first perimeter point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y114.088 E0.20991 ; perimeter
G1 X151.868 Y114.088 E0.04695 ; perimeter
G1 X151.868 Y119.184 E0.20991 ; perimeter
G1 X150.788 Y119.184 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.332 Y113.692 E0.24256 ; perimeter
G1 X152.264 Y113.692 E0.07960 ; perimeter
G1 X152.264 Y119.045 E0.22051 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X185.027 Y97.261 E0.92742 ; perimeter
G1 X185.432 Y96.958 E0.02086 ; perimeter
G1 X185.842 Y96.719 E0.01954 ; perimeter
G1 X186.273 Y96.531 E0.01936 ; perimeter
G1 X186.708 Y96.400 E0.01873 ; perimeter
G1 X187.140 Y96.325 E0.01806 ; perimeter
G1 X187.573 Y96.307 E0.01783 ; perimeter
G1 X187.749 Y96.317 E0.00728 ; perimeter
G1 X188.161 Y96.383 E0.01719 ; perimeter
G1 X188.510 Y96.494 E0.01508 ; perimeter
G1 X188.843 Y96.660 E0.01531 ; perimeter
G1 X189.111 Y96.853 E0.01362 ; perimeter
G1 X188.553 Y97.322 E0.03003 ; perimeter
G1 X188.339 Y97.189 E0.01039 ; perimeter
G1 X187.921 Y97.034 E0.01834 ; perimeter
G1 X187.479 Y96.960 E0.01847 ; perimeter
G1 X187.027 Y96.966 E0.01864 ; perimeter
G1 X186.576 Y97.046 E0.01884 ; perimeter
G1 X186.140 Y97.197 E0.01903 ; perimeter
G1 X185.730 Y97.412 E0.01906 ; perimeter
G1 X185.433 Y97.623 E0.01501 ; perimeter
G1 X167.976 Y112.267 E0.93868 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X150.392 Y119.580 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.935 Y113.296 E0.27522 ; perimeter
G1 X152.660 Y113.296 E0.11226 ; perimeter
G1 X152.660 Y118.648 E0.22051 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X184.781 Y96.950 E0.92194 ; perimeter
G1 X185.212 Y96.628 E0.02218 ; perimeter
G1 X185.664 Y96.365 E0.02154 ; perimeter
G1 X186.136 Y96.159 E0.02123 ; perimeter
G1 X186.617 Y96.013 E0.02070 ; perimeter
G1 X187.098 Y95.930 E0.02011 ; perimeter
G1 X187.575 Y95.911 E0.01966 ; perimeter
G1 X187.792 Y95.922 E0.00893 ; perimeter
G1 X188.249 Y95.996 E0.01908 ; perimeter
G1 X188.456 Y96.056 E0.00889 ; perimeter
G1 X188.664 Y96.128 E0.00905 ; perimeter
G1 X189.049 Y96.320 E0.01771 ; perimeter
G1 X189.388 Y96.564 E0.01721 ; perimeter
G1 X189.698 Y96.879 E0.01820 ; perimeter
G1 X188.565 Y97.829 E0.06089 ; perimeter
G1 X188.470 Y97.737 E0.00544 ; perimeter
G1 X188.163 Y97.546 E0.01489 ; perimeter
G1 X187.819 Y97.419 E0.01513 ; perimeter
G1 X187.449 Y97.357 E0.01546 ; perimeter
G1 X187.064 Y97.361 E0.01584 ; perimeter
G1 X186.677 Y97.431 E0.01621 ; perimeter
G1 X186.298 Y97.562 E0.01654 ; perimeter
G1 X185.938 Y97.751 E0.01674 ; perimeter
G1 X185.676 Y97.937 E0.01325 ; perimeter
G1 X168.120 Y112.663 E0.94397 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X149.995 Y119.976 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.074 Y119.601 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.966 Y116.685 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X150.843 Y118.136 ; move to first infill point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7814.3
G1 X151.552 Y118.844 E0.04798 ; infill
G1 X151.552 Y118.193 E0.03120 ; infill
G1 X151.044 Y117.685 E0.03437 ; infill
G1 X151.044 Y117.034 E0.03120 ; infill
G1 X151.552 Y117.541 E0.03437 ; infill
G1 X151.552 Y116.890 E0.03120 ; infill
G1 X151.044 Y116.382 E0.03437 ; infill
G1 X151.044 Y115.731 E0.03120 ; infill
G1 X151.552 Y116.238 E0.03437 ; infill
G1 X151.552 Y115.587 E0.03120 ; infill
G1 X151.044 Y115.079 E0.03437 ; infill
G1 X151.044 Y114.428 E0.03120 ; infill
G1 X151.752 Y115.136 E0.04798 ; infill
G1 F8640
G1 X151.044 Y114.428 E-0.23135 ; wipe and retract
G1 X151.044 Y115.079 E-0.15044 ; wipe and retract
G1 X151.552 Y115.587 E-0.16576 ; wipe and retract
G1 X151.552 Y116.238 E-0.15044 ; wipe and retract
G1 X151.362 Y116.048 E-0.06202 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X193.579 Y108.357 ; move to first perimeter point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 P72 R37
M204 S800 ; adjust acceleration
G1 F4800
G1 X193.235 Y107.947 E0.02205 ; perimeter
G1 X195.798 Y105.796 E0.13785 ; perimeter
G1 X192.387 Y101.731 E0.21861 ; perimeter
G1 X189.823 Y103.882 E0.13785 ; perimeter
G1 X189.479 Y103.472 E0.02205 ; perimeter
G1 X192.043 Y101.321 E0.13785 ; perimeter
G1 X189.594 Y98.402 E0.15696 ; perimeter
G1 X190.101 Y97.976 E0.02729 ; perimeter
G1 X199.099 Y108.699 E0.57663 ; perimeter
G1 X198.591 Y109.125 E0.02729 ; perimeter
G1 X196.142 Y106.206 E0.15696 ; perimeter
G1 X193.625 Y108.319 E0.13538 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.530 Y108.916 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X192.676 Y107.898 E0.05471 ; perimeter
G1 X195.239 Y105.747 E0.13785 ; perimeter
G1 X192.338 Y102.289 E0.18596 ; perimeter
G1 X189.775 Y104.440 E0.13785 ; perimeter
G1 X188.921 Y103.423 E0.05471 ; perimeter
G1 X191.484 Y101.272 E0.13785 ; perimeter
G1 X189.035 Y98.354 E0.15696 ; perimeter
G1 X190.150 Y97.418 E0.05995 ; perimeter
G1 X199.657 Y108.748 E0.60929 ; perimeter
G1 X198.542 Y109.683 E0.05995 ; perimeter
G1 X196.093 Y106.765 E0.15696 ; perimeter
G1 X193.576 Y108.877 E0.13538 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.573 Y108.518 F10800.000 ; move inwards before travel
G1 F8640
G1 X192.676 Y107.898 E-0.30695 ; wipe and retract
G1 X194.179 Y106.637 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X151.376 Y138.884 ; move to first perimeter point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X151.378 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E0.83403 ; perimeter
G1 X199.717 Y114.776 E1.51077 ; perimeter
G1 X200.037 Y114.466 E0.01834 ; perimeter
G1 X200.321 Y114.097 E0.01917 ; perimeter
G1 X200.545 Y113.694 E0.01903 ; perimeter
G1 X200.703 Y113.264 E0.01884 ; perimeter
G1 X200.787 Y112.820 E0.01864 ; perimeter
G1 X200.791 Y112.371 E0.01847 ; perimeter
G1 X200.711 Y111.933 E0.01834 ; perimeter
G1 X200.547 Y111.525 E0.01814 ; perimeter
G1 X200.350 Y111.226 E0.01476 ; perimeter
G1 X199.552 Y110.272 E0.05121 ; perimeter
G1 X200.061 Y109.846 E0.02734 ; perimeter
G1 X200.951 Y110.906 E0.05705 ; perimeter
G1 X201.166 Y111.211 E0.01536 ; perimeter
G1 X201.319 Y111.529 E0.01454 ; perimeter
G1 X201.423 Y111.878 E0.01502 ; perimeter
G1 X201.475 Y112.264 E0.01604 ; perimeter
G1 X201.469 Y112.646 E0.01573 ; perimeter
G1 X201.401 Y113.081 E0.01815 ; perimeter
G1 X201.205 Y113.676 E0.02579 ; perimeter
G1 X200.999 Y114.085 E0.01885 ; perimeter
G1 X200.744 Y114.468 E0.01898 ; perimeter
G1 X200.432 Y114.838 E0.01992 ; perimeter
G1 X200.065 Y115.183 E0.02074 ; perimeter
G1 X171.819 Y138.884 E1.51900 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X151.436 Y138.884 E0.56141 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.977 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X150.984 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E0.84433 ; perimeter
G1 X199.451 Y114.481 E1.50424 ; perimeter
G1 X199.740 Y114.201 E0.01657 ; perimeter
G1 X199.989 Y113.879 E0.01678 ; perimeter
G1 X200.184 Y113.528 E0.01654 ; perimeter
G1 X200.320 Y113.159 E0.01621 ; perimeter
G1 X200.391 Y112.781 E0.01584 ; perimeter
G1 X200.394 Y112.405 E0.01546 ; perimeter
G1 X200.328 Y112.044 E0.01513 ; perimeter
G1 X200.194 Y111.710 E0.01485 ; perimeter
G1 X200.031 Y111.463 E0.01219 ; perimeter
G1 X198.994 Y110.223 E0.06658 ; perimeter
G1 X200.109 Y109.287 E0.05997 ; perimeter
G1 X201.265 Y110.664 E0.07405 ; perimeter
G1 X201.508 Y111.009 E0.01739 ; perimeter
G1 X201.690 Y111.385 E0.01721 ; perimeter
G1 X201.812 Y111.795 E0.01761 ; perimeter
G1 X201.871 Y112.235 E0.01829 ; perimeter
G1 X201.864 Y112.685 E0.01855 ; perimeter
G1 X201.789 Y113.161 E0.01984 ; perimeter
G1 X201.736 Y113.370 E0.00888 ; perimeter
G1 X201.570 Y113.833 E0.02027 ; perimeter
G1 X201.343 Y114.283 E0.02075 ; perimeter
G1 X201.059 Y114.709 E0.02109 ; perimeter
G1 X200.720 Y115.111 E0.02167 ; perimeter
G1 X200.328 Y115.479 E0.02213 ; perimeter
G1 X171.963 Y139.280 E1.52541 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X151.037 Y139.280 E0.56150 ; perimeter
M204 S1000 ; adjust acceleration
G1 X151.189 Y138.941 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.984 Y137.952 E-0.30689 ; wipe and retract
G1 X152.946 Y137.952 E-0.45311 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
G1 X165.575 Y139.868 ; move to first infill point
G1 Z15.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.784 Y140.077 E0.01484 ; infill
G1 X166.469 Y140.077 E0.03448 ; infill
G1 X165.776 Y139.384 E0.04930 ; infill
G1 X165.776 Y139.061 E0.01627 ; infill
G1 X166.138 Y139.061 E0.01821 ; infill
G1 X167.153 Y140.077 E0.07230 ; infill
G1 X167.838 Y140.077 E0.03448 ; infill
G1 X166.823 Y139.061 E0.07230 ; infill
G1 X167.508 Y139.061 E0.03448 ; infill
G1 X168.523 Y140.077 E0.07230 ; infill
G1 X169.208 Y140.077 E0.03448 ; infill
G1 X168.193 Y139.061 E0.07230 ; infill
G1 X168.878 Y139.061 E0.03448 ; infill
G1 X169.660 Y139.843 E0.05567 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;16


G1 F8640
G1 X168.878 Y139.061 E-0.25535 ; wipe and retract
G1 X168.193 Y139.061 E-0.15815 ; wipe and retract
G1 X169.208 Y140.077 E-0.33164 ; wipe and retract
G1 X169.144 Y140.077 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;16
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X98.064 Y100.738 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.55254 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X49.516 Y76.924 E1.52621 ; perimeter
G1 X49.150 Y76.580 E0.02068 ; perimeter
G1 X48.842 Y76.216 E0.01967 ; perimeter
G1 X48.583 Y75.827 E0.01924 ; perimeter
G1 X48.378 Y75.422 E0.01868 ; perimeter
G1 X48.229 Y75.011 E0.01802 ; perimeter
G1 X48.136 Y74.590 E0.01776 ; perimeter
G1 X48.113 Y74.400 E0.00786 ; perimeter
G1 X48.107 Y73.992 E0.01681 ; perimeter
G1 X48.158 Y73.617 E0.01562 ; perimeter
G1 X48.262 Y73.268 E0.01497 ; perimeter
G1 X48.415 Y72.951 E0.01450 ; perimeter
G1 X48.630 Y72.648 E0.01532 ; perimeter
G1 X49.520 Y71.587 E0.05705 ; perimeter
G1 X50.028 Y72.013 E0.02729 ; perimeter
G1 X49.263 Y72.924 E0.04901 ; perimeter
G1 X49.035 Y73.264 E0.01685 ; perimeter
G1 X48.870 Y73.675 E0.01826 ; perimeter
G1 X48.790 Y74.113 E0.01834 ; perimeter
G1 X48.794 Y74.561 E0.01847 ; perimeter
G1 X48.878 Y75.006 E0.01864 ; perimeter
G1 X49.035 Y75.435 E0.01884 ; perimeter
G1 X49.260 Y75.839 E0.01903 ; perimeter
G1 X49.544 Y76.207 E0.01917 ; perimeter
G1 X49.864 Y76.517 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.51798 ; perimeter
G1 X98.063 Y100.203 E0.82278 ; perimeter
G1 X98.064 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X98.460 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.55255 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03671 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X49.252 Y77.220 E1.53262 ; perimeter
G1 X48.862 Y76.853 E0.02207 ; perimeter
G1 X48.524 Y76.454 E0.02154 ; perimeter
G1 X48.240 Y76.027 E0.02115 ; perimeter
G1 X48.013 Y75.580 E0.02065 ; perimeter
G1 X47.848 Y75.122 E0.02007 ; perimeter
G1 X47.745 Y74.657 E0.01961 ; perimeter
G1 X47.717 Y74.427 E0.00954 ; perimeter
G1 X47.711 Y73.968 E0.01890 ; perimeter
G1 X47.770 Y73.533 E0.01810 ; perimeter
G1 X47.891 Y73.125 E0.01756 ; perimeter
G1 X48.073 Y72.749 E0.01716 ; perimeter
G1 X48.316 Y72.406 E0.01734 ; perimeter
G1 X49.471 Y71.029 E0.07406 ; perimeter
G1 X50.586 Y71.964 E0.05995 ; perimeter
G1 X49.580 Y73.163 E0.06447 ; perimeter
G1 X49.387 Y73.450 E0.01426 ; perimeter
G1 X49.252 Y73.785 E0.01489 ; perimeter
G1 X49.186 Y74.147 E0.01513 ; perimeter
G1 X49.190 Y74.522 E0.01546 ; perimeter
G1 X49.261 Y74.900 E0.01584 ; perimeter
G1 X49.397 Y75.269 E0.01621 ; perimeter
G1 X49.592 Y75.620 E0.01654 ; perimeter
G1 X49.840 Y75.943 E0.01678 ; perimeter
G1 X50.129 Y76.223 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.51146 ; perimeter
G1 X98.460 Y99.806 E0.83316 ; perimeter
G1 X98.460 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X98.060 Y101.126 F10800.000 ; move inwards before travel
G1 F8640
G1 X95.169 Y101.089 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X83.730 Y102.131 ; move to first infill point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.939 Y101.923 E0.01484 ; infill
G1 X83.939 Y101.238 E0.03448 ; infill
G1 X83.246 Y101.931 E0.04931 ; infill
G1 X82.561 Y101.931 E0.03448 ; infill
G1 X83.577 Y100.915 E0.07230 ; infill
G1 X82.892 Y100.915 E0.03448 ; infill
G1 X81.876 Y101.931 E0.07230 ; infill
G1 X81.191 Y101.931 E0.03448 ; infill
G1 X82.207 Y100.915 E0.07230 ; infill
G1 X81.522 Y100.915 E0.03448 ; infill
G1 X80.506 Y101.931 E0.07230 ; infill
G1 X80.256 Y101.931 E0.01260 ; infill
G1 X80.256 Y101.496 E0.02188 ; infill
G1 X81.038 Y100.714 E0.05566 ; infill
G1 F8640
G1 X80.256 Y101.496 E-0.25530 ; wipe and retract
G1 X80.256 Y101.931 E-0.10036 ; wipe and retract
G1 X80.506 Y101.931 E-0.05779 ; wipe and retract
G1 X81.522 Y100.915 E-0.33164 ; wipe and retract
G1 X81.587 Y100.915 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X55.997 Y70.094 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X53.439 Y67.948 E0.13758 ; perimeter
G1 X50.990 Y70.866 E0.15696 ; perimeter
G1 X50.482 Y70.440 E0.02729 ; perimeter
G1 X59.480 Y59.718 E0.57663 ; perimeter
G1 X59.987 Y60.144 E0.02729 ; perimeter
G1 X57.538 Y63.062 E0.15696 ; perimeter
G1 X60.096 Y65.209 E0.13758 ; perimeter
G1 X59.752 Y65.619 E0.02205 ; perimeter
G1 X57.194 Y63.472 E0.13758 ; perimeter
G1 X53.783 Y67.538 E0.21861 ; perimeter
G1 X56.341 Y69.684 E0.13758 ; perimeter
G1 X56.036 Y70.048 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X56.046 Y70.653 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X53.488 Y68.506 E0.13758 ; perimeter
G1 X51.039 Y71.425 E0.15696 ; perimeter
G1 X49.924 Y70.489 E0.05995 ; perimeter
G1 X59.431 Y59.159 E0.60929 ; perimeter
G1 X60.545 Y60.095 E0.05995 ; perimeter
G1 X58.096 Y63.013 E0.15696 ; perimeter
G1 X60.655 Y65.160 E0.13758 ; perimeter
G1 X59.801 Y66.177 E0.05471 ; perimeter
G1 X57.243 Y64.031 E0.13758 ; perimeter
G1 X54.341 Y67.489 E0.18596 ; perimeter
G1 X56.900 Y69.635 E0.13758 ; perimeter
G1 X56.084 Y70.607 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.774 Y70.359 F10800.000 ; move inwards before travel
G1 F8640
G1 X53.526 Y68.537 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X98.987 Y81.038 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.04695 ; perimeter
G1 X97.847 Y75.767 E0.21712 ; perimeter
G1 X98.987 Y75.767 E0.04695 ; perimeter
G1 X98.987 Y80.978 E0.21465 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.15621 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X64.214 Y59.415 E0.94246 ; perimeter
G1 X63.853 Y59.154 E0.01834 ; perimeter
G1 X63.441 Y58.939 E0.01917 ; perimeter
G1 X63.004 Y58.788 E0.01903 ; perimeter
G1 X62.554 Y58.707 E0.01884 ; perimeter
G1 X62.101 Y58.701 E0.01864 ; perimeter
G1 X61.659 Y58.775 E0.01847 ; perimeter
G1 X61.311 Y58.904 E0.01529 ; perimeter
G1 X61.031 Y59.066 E0.01332 ; perimeter
G1 X60.470 Y58.595 E0.03019 ; perimeter
G1 X60.736 Y58.402 E0.01354 ; perimeter
G1 X61.061 Y58.240 E0.01497 ; perimeter
G1 X61.430 Y58.122 E0.01597 ; perimeter
G1 X61.806 Y58.061 E0.01567 ; perimeter
G1 X62.245 Y58.051 E0.01808 ; perimeter
G1 X62.437 Y58.066 E0.00794 ; perimeter
G1 X62.877 Y58.142 E0.01842 ; perimeter
G1 X63.311 Y58.274 E0.01868 ; perimeter
G1 X63.741 Y58.462 E0.01932 ; perimeter
G1 X64.150 Y58.700 E0.01949 ; perimeter
G1 X64.554 Y59.002 E0.02079 ; perimeter
G1 X81.934 Y73.586 E0.93464 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y75.371 E0.22772 ; perimeter
G1 X99.383 Y75.381 E0.07960 ; perimeter
G1 X99.383 Y81.374 E0.24688 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.17848 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
M73 Q72 S38
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X63.970 Y59.728 E0.94782 ; perimeter
G1 X63.644 Y59.492 E0.01657 ; perimeter
G1 X63.283 Y59.304 E0.01678 ; perimeter
G1 X62.904 Y59.172 E0.01654 ; perimeter
G1 X62.516 Y59.103 E0.01621 ; perimeter
G1 X62.132 Y59.098 E0.01584 ; perimeter
G1 X61.762 Y59.160 E0.01546 ; perimeter
G1 X61.480 Y59.264 E0.01237 ; perimeter
G1 X61.113 Y59.476 E0.01746 ; perimeter
G1 X61.015 Y59.570 E0.00559 ; perimeter
G1 X59.883 Y58.620 E0.06089 ; perimeter
G1 X60.192 Y58.306 E0.01815 ; perimeter
G1 X60.530 Y58.062 E0.01716 ; perimeter
G1 X60.911 Y57.872 E0.01756 ; perimeter
G1 X61.333 Y57.737 E0.01822 ; perimeter
G1 X61.776 Y57.665 E0.01849 ; perimeter
G1 X62.255 Y57.655 E0.01977 ; perimeter
G1 X62.486 Y57.672 E0.00952 ; perimeter
G1 X62.969 Y57.756 E0.02021 ; perimeter
G1 X63.449 Y57.901 E0.02065 ; perimeter
G1 X63.920 Y58.108 E0.02118 ; perimeter
G1 X64.370 Y58.370 E0.02148 ; perimeter
G1 X64.800 Y58.691 E0.02211 ; perimeter
G1 X82.078 Y73.189 E0.92916 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y74.974 E0.22772 ; perimeter
G1 X99.371 Y74.974 E0.09541 ; perimeter
G1 X99.780 Y75.056 E0.01717 ; perimeter
G1 X99.780 Y81.770 E0.27662 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.429 Y81.637 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.488 Y81.816 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X97.962 Y80.870 ; move to first infill point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7587.78
G1 X98.671 Y80.161 E0.04941 ; infill
G1 X98.671 Y79.490 E0.03309 ; infill
G1 X98.163 Y79.998 E0.03540 ; infill
G1 X98.163 Y79.327 E0.03309 ; infill
G1 X98.671 Y78.819 E0.03540 ; infill
G1 X98.671 Y78.148 E0.03309 ; infill
G1 X98.163 Y78.656 E0.03540 ; infill
G1 X98.163 Y77.985 E0.03309 ; infill
G1 X98.671 Y77.478 E0.03540 ; infill
G1 X98.671 Y76.807 E0.03309 ; infill
G1 X98.163 Y77.314 E0.03540 ; infill
G1 X98.163 Y76.643 E0.03309 ; infill
G1 X98.872 Y75.935 E0.04941 ; infill
G1 F8640
G1 X98.163 Y76.643 E-0.23135 ; wipe and retract
G1 X98.163 Y77.314 E-0.15493 ; wipe and retract
G1 X98.671 Y76.807 E-0.16576 ; wipe and retract
G1 X98.671 Y77.478 E-0.15493 ; wipe and retract
G1 X98.509 Y77.640 E-0.05303 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.597 Y87.380 E0.10710 ; perimeter
G1 X76.941 Y86.970 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.10710 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X83.618 Y79.013 E0.10710 ; perimeter
G1 X83.962 Y78.603 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.10710 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X76.039 Y87.429 E0.10710 ; perimeter
G1 X76.892 Y86.411 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.10710 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X83.059 Y79.062 E0.10710 ; perimeter
G1 X83.913 Y78.045 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.10710 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X166.038 Y78.603 E0.10710 ; perimeter
G1 X166.382 Y79.013 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.10710 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X173.059 Y86.970 E0.10710 ; perimeter
G1 X173.403 Y87.380 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.10710 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X166.087 Y78.045 E0.10710 ; perimeter
G1 X166.941 Y79.062 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.10710 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X173.108 Y86.411 E0.10710 ; perimeter
G1 X173.961 Y87.429 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.10710 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X151.013 Y81.038 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y75.767 E0.21712 ; perimeter
G1 X152.153 Y75.767 E0.04695 ; perimeter
G1 X152.153 Y81.038 E0.21712 ; perimeter
G1 X151.073 Y81.038 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.617 Y75.381 E0.24935 ; perimeter
G1 X152.549 Y75.371 E0.07960 ; perimeter
G1 X152.549 Y80.899 E0.22772 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X185.446 Y59.002 E0.93464 ; perimeter
G1 X185.850 Y58.700 E0.02079 ; perimeter
G1 X186.259 Y58.462 E0.01949 ; perimeter
G1 X186.689 Y58.274 E0.01932 ; perimeter
G1 X187.123 Y58.142 E0.01868 ; perimeter
G1 X187.554 Y58.067 E0.01802 ; perimeter
G1 X187.984 Y58.049 E0.01776 ; perimeter
G1 X188.175 Y58.059 E0.00786 ; perimeter
G1 X188.585 Y58.126 E0.01713 ; perimeter
G1 X188.933 Y58.237 E0.01503 ; perimeter
G1 X189.264 Y58.402 E0.01525 ; perimeter
G1 X189.530 Y58.595 E0.01354 ; perimeter
G1 X188.972 Y59.063 E0.03002 ; perimeter
G1 X188.758 Y58.930 E0.01039 ; perimeter
G1 X188.341 Y58.775 E0.01834 ; perimeter
G1 X187.899 Y58.701 E0.01847 ; perimeter
G1 X187.446 Y58.707 E0.01864 ; perimeter
G1 X186.996 Y58.788 E0.01884 ; perimeter
G1 X186.559 Y58.939 E0.01903 ; perimeter
G1 X186.149 Y59.153 E0.01907 ; perimeter
G1 X185.848 Y59.367 E0.01520 ; perimeter
G1 X168.261 Y74.121 E0.94569 ; perimeter
G1 X163.124 Y74.121 E0.21163 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X150.677 Y81.434 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X150.220 Y75.056 E0.27909 ; perimeter
G1 X150.629 Y74.974 E0.01717 ; perimeter
G1 X152.945 Y74.974 E0.09541 ; perimeter
G1 X152.945 Y80.502 E0.22772 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X185.200 Y58.691 E0.92916 ; perimeter
G1 X185.630 Y58.370 E0.02211 ; perimeter
G1 X186.080 Y58.108 E0.02148 ; perimeter
G1 X186.551 Y57.901 E0.02118 ; perimeter
G1 X187.031 Y57.756 E0.02065 ; perimeter
G1 X187.511 Y57.673 E0.02007 ; perimeter
G1 X187.986 Y57.652 E0.01961 ; perimeter
G1 X188.218 Y57.664 E0.00954 ; perimeter
G1 X188.673 Y57.738 E0.01902 ; perimeter
G1 X188.865 Y57.794 E0.00825 ; perimeter
G1 X189.087 Y57.870 E0.00964 ; perimeter
G1 X189.470 Y58.062 E0.01766 ; perimeter
G1 X189.808 Y58.306 E0.01716 ; perimeter
G1 X190.117 Y58.620 E0.01815 ; perimeter
G1 X188.985 Y59.570 E0.06089 ; perimeter
G1 X188.890 Y59.479 E0.00544 ; perimeter
G1 X188.583 Y59.288 E0.01489 ; perimeter
G1 X188.238 Y59.160 E0.01513 ; perimeter
G1 X187.868 Y59.098 E0.01546 ; perimeter
G1 X187.484 Y59.103 E0.01584 ; perimeter
G1 X187.096 Y59.172 E0.01621 ; perimeter
G1 X186.717 Y59.304 E0.01654 ; perimeter
G1 X186.357 Y59.492 E0.01674 ; perimeter
G1 X186.091 Y59.681 E0.01344 ; perimeter
G1 X168.405 Y74.517 E0.95099 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X150.280 Y81.830 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.359 Y81.455 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.251 Y78.539 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X151.128 Y80.870 ; move to first infill point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7587.78
G1 X151.837 Y80.161 E0.04941 ; infill
G1 X151.837 Y79.490 E0.03309 ; infill
G1 X151.329 Y79.998 E0.03540 ; infill
G1 X151.329 Y79.327 E0.03309 ; infill
G1 X151.837 Y78.819 E0.03540 ; infill
G1 X151.837 Y78.148 E0.03309 ; infill
G1 X151.329 Y78.656 E0.03540 ; infill
G1 X151.329 Y77.985 E0.03309 ; infill
G1 X151.837 Y77.478 E0.03540 ; infill
G1 X151.837 Y76.807 E0.03309 ; infill
G1 X151.329 Y77.314 E0.03540 ; infill
G1 X151.329 Y76.643 E0.03309 ; infill
G1 X152.038 Y75.935 E0.04941 ; infill
G1 F8640
G1 X151.329 Y76.643 E-0.23135 ; wipe and retract
G1 X151.329 Y77.314 E-0.15493 ; wipe and retract
G1 X151.837 Y76.807 E-0.16576 ; wipe and retract
G1 X151.837 Y77.478 E-0.15493 ; wipe and retract
G1 X151.674 Y77.640 E-0.05303 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X194.003 Y70.094 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X193.659 Y69.684 E0.02205 ; perimeter
G1 X196.217 Y67.538 E0.13758 ; perimeter
G1 X192.806 Y63.472 E0.21861 ; perimeter
G1 X190.248 Y65.619 E0.13758 ; perimeter
G1 X189.904 Y65.209 E0.02205 ; perimeter
G1 X192.462 Y63.062 E0.13758 ; perimeter
G1 X190.013 Y60.144 E0.15696 ; perimeter
G1 X190.520 Y59.718 E0.02729 ; perimeter
G1 X199.518 Y70.440 E0.57663 ; perimeter
G1 X199.010 Y70.866 E0.02729 ; perimeter
G1 X196.561 Y67.948 E0.15696 ; perimeter
G1 X194.049 Y70.056 E0.13511 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.954 Y70.653 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X193.100 Y69.635 E0.05471 ; perimeter
G1 X195.659 Y67.489 E0.13758 ; perimeter
G1 X192.757 Y64.031 E0.18596 ; perimeter
G1 X190.199 Y66.177 E0.13758 ; perimeter
G1 X189.345 Y65.160 E0.05471 ; perimeter
G1 X191.904 Y63.013 E0.13758 ; perimeter
G1 X189.455 Y60.095 E0.15696 ; perimeter
G1 X190.569 Y59.159 E0.05995 ; perimeter
G1 X200.076 Y70.489 E0.60929 ; perimeter
G1 X198.961 Y71.425 E0.05995 ; perimeter
G1 X196.512 Y68.506 E0.15696 ; perimeter
G1 X194.000 Y70.614 E0.13511 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.998 Y70.255 F10800.000 ; move inwards before travel
G1 F8640
G1 X193.100 Y69.635 E-0.30695 ; wipe and retract
G1 X194.603 Y68.374 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X151.936 Y100.738 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X151.937 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E0.82278 ; perimeter
G1 X200.136 Y76.517 E1.51798 ; perimeter
G1 X200.456 Y76.207 E0.01834 ; perimeter
G1 X200.740 Y75.839 E0.01917 ; perimeter
G1 X200.965 Y75.435 E0.01903 ; perimeter
G1 X201.122 Y75.006 E0.01884 ; perimeter
G1 X201.206 Y74.561 E0.01864 ; perimeter
G1 X201.210 Y74.113 E0.01847 ; perimeter
G1 X201.130 Y73.675 E0.01834 ; perimeter
G1 X200.966 Y73.266 E0.01815 ; perimeter
G1 X200.767 Y72.964 E0.01490 ; perimeter
G1 X199.972 Y72.013 E0.05106 ; perimeter
G1 X200.480 Y71.587 E0.02733 ; perimeter
G1 X201.370 Y72.648 E0.05705 ; perimeter
G1 X201.585 Y72.951 E0.01532 ; perimeter
G1 X201.738 Y73.268 E0.01450 ; perimeter
G1 X201.844 Y73.623 E0.01525 ; perimeter
G1 X201.893 Y73.985 E0.01503 ; perimeter
G1 X201.887 Y74.400 E0.01713 ; perimeter
G1 X201.864 Y74.590 E0.00786 ; perimeter
G1 X201.771 Y75.011 E0.01776 ; perimeter
G1 X201.622 Y75.422 E0.01802 ; perimeter
G1 X201.416 Y75.830 E0.01882 ; perimeter
G1 X201.161 Y76.212 E0.01893 ; perimeter
G1 X200.850 Y76.580 E0.01985 ; perimeter
G1 X200.484 Y76.924 E0.02068 ; perimeter
G1 X172.104 Y100.738 E1.52621 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X151.996 Y100.738 E0.55007 ; perimeter
M204 S1000 ; adjust acceleration
G1 X151.540 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X151.540 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E0.83316 ; perimeter
G1 X199.871 Y76.223 E1.51146 ; perimeter
G1 X200.160 Y75.943 E0.01657 ; perimeter
G1 X200.408 Y75.620 E0.01678 ; perimeter
G1 X200.603 Y75.269 E0.01654 ; perimeter
G1 X200.739 Y74.900 E0.01621 ; perimeter
G1 X200.810 Y74.522 E0.01584 ; perimeter
G1 X200.814 Y74.147 E0.01546 ; perimeter
G1 X200.748 Y73.785 E0.01513 ; perimeter
G1 X200.613 Y73.451 E0.01485 ; perimeter
G1 X200.448 Y73.201 E0.01233 ; perimeter
G1 X199.414 Y71.964 E0.06644 ; perimeter
G1 X200.529 Y71.029 E0.05997 ; perimeter
G1 X201.684 Y72.406 E0.07406 ; perimeter
G1 X201.927 Y72.749 E0.01734 ; perimeter
G1 X202.109 Y73.125 E0.01716 ; perimeter
G1 X202.231 Y73.535 E0.01766 ; perimeter
G1 X202.289 Y73.965 E0.01788 ; perimeter
G1 X202.283 Y74.427 E0.01902 ; perimeter
G1 X202.255 Y74.657 E0.00954 ; perimeter
G1 X202.152 Y75.122 E0.01961 ; perimeter
G1 X201.987 Y75.580 E0.02007 ; perimeter
G1 X201.760 Y76.028 E0.02070 ; perimeter
G1 X201.477 Y76.453 E0.02104 ; perimeter
G1 X201.138 Y76.853 E0.02161 ; perimeter
G1 X200.748 Y77.220 E0.02207 ; perimeter
G1 X172.248 Y101.134 E1.53262 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X151.600 Y101.134 E0.55008 ; perimeter
M204 S1000 ; adjust acceleration
G1 X151.751 Y100.794 F10800.000 ; move inwards before travel
G1 F8640
G1 X151.540 Y99.806 E-0.30695 ; wipe and retract
G1 X153.502 Y99.806 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X166.843 Y100.714 ; move to first infill point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.061 Y101.496 E0.05566 ; infill
G1 X166.061 Y101.931 E0.02188 ; infill
G1 X166.312 Y101.931 E0.01260 ; infill
G1 X167.327 Y100.915 E0.07230 ; infill
G1 X168.012 Y100.915 E0.03448 ; infill
G1 X166.996 Y101.931 E0.07230 ; infill
G1 X167.681 Y101.931 E0.03448 ; infill
G1 X168.697 Y100.915 E0.07230 ; infill
G1 X169.382 Y100.915 E0.03448 ; infill
G1 X168.366 Y101.931 E0.07230 ; infill
G1 X169.051 Y101.931 E0.03448 ; infill
G1 X169.744 Y101.238 E0.04931 ; infill
G1 X169.744 Y101.923 E0.03448 ; infill
G1 X169.535 Y102.131 E0.01484 ; infill
G1 F8640
G1 X169.744 Y101.923 E-0.06809 ; wipe and retract
G1 X169.744 Y101.238 E-0.15815 ; wipe and retract
G1 X169.051 Y101.931 E-0.22616 ; wipe and retract
G1 X168.366 Y101.931 E-0.15815 ; wipe and retract
G1 X168.824 Y101.473 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X97.779 Y138.884 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.55254 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X49.231 Y115.070 E1.52621 ; perimeter
G1 X48.865 Y114.726 E0.02068 ; perimeter
G1 X48.556 Y114.362 E0.01967 ; perimeter
G1 X48.298 Y113.973 E0.01924 ; perimeter
G1 X48.093 Y113.568 E0.01868 ; perimeter
G1 X47.944 Y113.157 E0.01802 ; perimeter
G1 X47.851 Y112.736 E0.01776 ; perimeter
G1 X47.828 Y112.547 E0.00786 ; perimeter
G1 X47.822 Y112.139 E0.01681 ; perimeter
G1 X47.873 Y111.763 E0.01562 ; perimeter
G1 X47.977 Y111.414 E0.01497 ; perimeter
G1 X48.130 Y111.098 E0.01450 ; perimeter
G1 X48.345 Y110.794 E0.01532 ; perimeter
G1 X49.235 Y109.733 E0.05705 ; perimeter
G1 X49.743 Y110.159 E0.02729 ; perimeter
G1 X48.978 Y111.070 E0.04901 ; perimeter
G1 X48.750 Y111.410 E0.01685 ; perimeter
G1 X48.584 Y111.821 E0.01826 ; perimeter
G1 X48.504 Y112.259 E0.01834 ; perimeter
G1 X48.509 Y112.707 E0.01847 ; perimeter
G1 X48.592 Y113.152 E0.01864 ; perimeter
G1 X48.750 Y113.581 E0.01884 ; perimeter
G1 X48.975 Y113.985 E0.01903 ; perimeter
G1 X49.259 Y114.354 E0.01917 ; perimeter
G1 X49.578 Y114.663 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.51798 ; perimeter
G1 X97.778 Y138.349 E0.82278 ; perimeter
G1 X97.778 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X98.175 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.55255 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03671 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X48.967 Y115.367 E1.53262 ; perimeter
G1 X48.577 Y115.000 E0.02207 ; perimeter
G1 X48.239 Y114.600 E0.02154 ; perimeter
G1 X47.955 Y114.173 E0.02115 ; perimeter
G1 X47.728 Y113.726 E0.02065 ; perimeter
G1 X47.563 Y113.268 E0.02007 ; perimeter
G1 X47.460 Y112.803 E0.01961 ; perimeter
G1 X47.432 Y112.573 E0.00954 ; perimeter
G1 X47.426 Y112.114 E0.01890 ; perimeter
G1 X47.485 Y111.679 E0.01810 ; perimeter
G1 X47.606 Y111.271 E0.01756 ; perimeter
G1 X47.788 Y110.896 E0.01716 ; perimeter
G1 X48.031 Y110.552 E0.01734 ; perimeter
G1 X49.186 Y109.175 E0.07406 ; perimeter
G1 X50.301 Y110.110 E0.05995 ; perimeter
G1 X49.295 Y111.309 E0.06447 ; perimeter
M73 P73 R36
G1 X49.102 Y111.596 E0.01426 ; perimeter
G1 X48.967 Y111.932 E0.01489 ; perimeter
G1 X48.901 Y112.293 E0.01513 ; perimeter
G1 X48.905 Y112.668 E0.01546 ; perimeter
G1 X48.976 Y113.046 E0.01584 ; perimeter
G1 X49.111 Y113.416 E0.01621 ; perimeter
G1 X49.307 Y113.766 E0.01654 ; perimeter
G1 X49.555 Y114.089 E0.01678 ; perimeter
G1 X49.844 Y114.369 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.51146 ; perimeter
G1 X98.174 Y137.952 E0.83316 ; perimeter
G1 X98.175 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X97.775 Y139.272 F10800.000 ; move inwards before travel
G1 F8640
G1 X94.884 Y139.235 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X83.445 Y140.278 ; move to first infill point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.654 Y140.069 E0.01484 ; infill
G1 X83.654 Y139.384 E0.03448 ; infill
G1 X82.961 Y140.077 E0.04931 ; infill
G1 X82.276 Y140.077 E0.03448 ; infill
G1 X83.292 Y139.061 E0.07230 ; infill
G1 X82.607 Y139.061 E0.03448 ; infill
G1 X81.591 Y140.077 E0.07230 ; infill
G1 X80.906 Y140.077 E0.03448 ; infill
G1 X81.922 Y139.061 E0.07230 ; infill
G1 X81.237 Y139.061 E0.03448 ; infill
G1 X80.221 Y140.077 E0.07230 ; infill
G1 X79.971 Y140.077 E0.01260 ; infill
G1 X79.971 Y139.642 E0.02188 ; infill
G1 X80.753 Y138.860 E0.05566 ; infill
G1 F8640
G1 X79.971 Y139.642 E-0.25530 ; wipe and retract
G1 X79.971 Y140.077 E-0.10036 ; wipe and retract
G1 X80.221 Y140.077 E-0.05779 ; wipe and retract
G1 X81.237 Y139.061 E-0.33164 ; wipe and retract
G1 X81.301 Y139.061 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X55.712 Y108.240 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X53.154 Y106.094 E0.13758 ; perimeter
G1 X50.705 Y109.012 E0.15696 ; perimeter
G1 X50.197 Y108.587 E0.02729 ; perimeter
G1 X59.194 Y97.864 E0.57663 ; perimeter
G1 X59.702 Y98.290 E0.02729 ; perimeter
G1 X57.253 Y101.208 E0.15696 ; perimeter
G1 X59.811 Y103.355 E0.13758 ; perimeter
G1 X59.467 Y103.765 E0.02205 ; perimeter
G1 X56.909 Y101.619 E0.13758 ; perimeter
G1 X53.498 Y105.684 E0.21861 ; perimeter
G1 X56.056 Y107.830 E0.13758 ; perimeter
G1 X55.750 Y108.194 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.761 Y108.799 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X53.202 Y106.652 E0.13758 ; perimeter
G1 X50.753 Y109.571 E0.15696 ; perimeter
G1 X49.639 Y108.635 E0.05995 ; perimeter
G1 X59.145 Y97.306 E0.60929 ; perimeter
G1 X60.260 Y98.241 E0.05995 ; perimeter
G1 X57.811 Y101.160 E0.15696 ; perimeter
G1 X60.370 Y103.306 E0.13758 ; perimeter
G1 X59.516 Y104.324 E0.05471 ; perimeter
G1 X56.958 Y102.177 E0.13758 ; perimeter
G1 X54.056 Y105.635 E0.18596 ; perimeter
G1 X56.614 Y107.781 E0.13758 ; perimeter
G1 X55.799 Y108.753 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.489 Y108.505 F10800.000 ; move inwards before travel
G1 F8640
G1 X53.240 Y106.683 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X98.702 Y119.184 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.04695 ; perimeter
G1 X97.562 Y113.913 E0.21712 ; perimeter
G1 X98.702 Y113.913 E0.04695 ; perimeter
G1 X98.702 Y119.124 E0.21465 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.15621 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X63.928 Y97.562 E0.94246 ; perimeter
G1 X63.568 Y97.301 E0.01834 ; perimeter
G1 X63.156 Y97.085 E0.01917 ; perimeter
G1 X62.719 Y96.934 E0.01903 ; perimeter
G1 X62.269 Y96.853 E0.01884 ; perimeter
G1 X61.816 Y96.848 E0.01864 ; perimeter
G1 X61.374 Y96.921 E0.01847 ; perimeter
G1 X61.026 Y97.051 E0.01529 ; perimeter
G1 X60.746 Y97.212 E0.01332 ; perimeter
G1 X60.184 Y96.741 E0.03019 ; perimeter
G1 X60.451 Y96.549 E0.01354 ; perimeter
G1 X60.776 Y96.386 E0.01497 ; perimeter
G1 X61.145 Y96.268 E0.01597 ; perimeter
G1 X61.521 Y96.207 E0.01567 ; perimeter
G1 X61.959 Y96.197 E0.01808 ; perimeter
G1 X62.152 Y96.212 E0.00794 ; perimeter
G1 X62.592 Y96.288 E0.01842 ; perimeter
G1 X63.026 Y96.420 E0.01868 ; perimeter
G1 X63.456 Y96.608 E0.01932 ; perimeter
G1 X63.864 Y96.846 E0.01949 ; perimeter
G1 X64.269 Y97.148 E0.02079 ; perimeter
G1 X81.649 Y111.732 E0.93464 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y113.517 E0.22772 ; perimeter
G1 X99.098 Y113.527 E0.07960 ; perimeter
G1 X99.098 Y119.520 E0.24688 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.17848 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X63.685 Y97.874 E0.94782 ; perimeter
G1 X63.359 Y97.638 E0.01657 ; perimeter
G1 X62.998 Y97.450 E0.01678 ; perimeter
G1 X62.619 Y97.318 E0.01654 ; perimeter
G1 X62.231 Y97.249 E0.01621 ; perimeter
G1 X61.847 Y97.244 E0.01584 ; perimeter
G1 X61.477 Y97.306 E0.01546 ; perimeter
G1 X61.195 Y97.411 E0.01237 ; perimeter
G1 X60.828 Y97.622 E0.01746 ; perimeter
G1 X60.730 Y97.716 E0.00559 ; perimeter
G1 X59.598 Y96.766 E0.06089 ; perimeter
G1 X59.907 Y96.452 E0.01815 ; perimeter
G1 X60.245 Y96.208 E0.01716 ; perimeter
G1 X60.626 Y96.018 E0.01756 ; perimeter
G1 X61.047 Y95.883 E0.01822 ; perimeter
G1 X61.490 Y95.811 E0.01849 ; perimeter
G1 X61.970 Y95.801 E0.01977 ; perimeter
G1 X62.201 Y95.818 E0.00952 ; perimeter
G1 X62.684 Y95.902 E0.02021 ; perimeter
G1 X63.164 Y96.048 E0.02065 ; perimeter
G1 X63.635 Y96.254 E0.02118 ; perimeter
G1 X64.085 Y96.516 E0.02148 ; perimeter
G1 X64.515 Y96.837 E0.02211 ; perimeter
G1 X81.793 Y111.335 E0.92916 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y113.121 E0.22772 ; perimeter
G1 X99.086 Y113.121 E0.09541 ; perimeter
G1 X99.494 Y113.202 E0.01717 ; perimeter
G1 X99.494 Y119.916 E0.27662 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.144 Y119.783 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.203 Y119.962 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X97.677 Y119.016 ; move to first infill point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7587.78
G1 X98.386 Y118.308 E0.04941 ; infill
G1 X98.386 Y117.637 E0.03309 ; infill
G1 X97.878 Y118.144 E0.03540 ; infill
G1 X97.878 Y117.473 E0.03309 ; infill
G1 X98.386 Y116.966 E0.03540 ; infill
G1 X98.386 Y116.295 E0.03309 ; infill
G1 X97.878 Y116.802 E0.03540 ; infill
G1 X97.878 Y116.131 E0.03309 ; infill
G1 X98.386 Y115.624 E0.03540 ; infill
G1 X98.386 Y114.953 E0.03309 ; infill
G1 X97.878 Y115.460 E0.03540 ; infill
G1 X97.878 Y114.789 E0.03309 ; infill
G1 X98.587 Y114.081 E0.04941 ; infill
G1 F8640
G1 X97.878 Y114.789 E-0.23135 ; wipe and retract
G1 X97.878 Y115.460 E-0.15493 ; wipe and retract
G1 X98.386 Y114.953 E-0.16576 ; wipe and retract
G1 X98.386 Y115.624 E-0.15493 ; wipe and retract
G1 X98.223 Y115.786 E-0.05303 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X76.312 Y125.526 E0.10710 ; perimeter
G1 X76.656 Y125.116 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.10710 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X83.332 Y117.159 E0.10710 ; perimeter
G1 X83.677 Y116.749 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.10710 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.754 Y125.575 E0.10710 ; perimeter
G1 X76.607 Y124.557 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.10710 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X82.774 Y117.208 E0.10710 ; perimeter
G1 X83.628 Y116.191 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.10710 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X165.753 Y116.749 E0.10710 ; perimeter
G1 X166.097 Y117.159 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.10710 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X172.774 Y125.116 E0.10710 ; perimeter
G1 X173.118 Y125.526 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.10710 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X165.802 Y116.191 E0.10710 ; perimeter
G1 X166.656 Y117.208 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.10710 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X172.822 Y124.557 E0.10710 ; perimeter
G1 X173.676 Y125.575 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.10710 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X150.728 Y119.184 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y113.913 E0.21712 ; perimeter
G1 X151.868 Y113.913 E0.04695 ; perimeter
G1 X151.868 Y119.184 E0.21712 ; perimeter
G1 X150.788 Y119.184 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.332 Y113.527 E0.24935 ; perimeter
G1 X152.264 Y113.517 E0.07960 ; perimeter
G1 X152.264 Y119.045 E0.22772 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X185.161 Y97.148 E0.93464 ; perimeter
G1 X185.565 Y96.846 E0.02079 ; perimeter
G1 X185.974 Y96.608 E0.01949 ; perimeter
G1 X186.404 Y96.420 E0.01932 ; perimeter
G1 X186.837 Y96.288 E0.01868 ; perimeter
G1 X187.268 Y96.214 E0.01802 ; perimeter
G1 X187.699 Y96.195 E0.01776 ; perimeter
G1 X187.890 Y96.205 E0.00786 ; perimeter
G1 X188.300 Y96.272 E0.01713 ; perimeter
G1 X188.648 Y96.383 E0.01503 ; perimeter
G1 X188.979 Y96.549 E0.01525 ; perimeter
G1 X189.245 Y96.741 E0.01354 ; perimeter
G1 X188.687 Y97.209 E0.03002 ; perimeter
G1 X188.473 Y97.076 E0.01039 ; perimeter
G1 X188.056 Y96.921 E0.01834 ; perimeter
G1 X187.613 Y96.848 E0.01847 ; perimeter
G1 X187.161 Y96.853 E0.01864 ; perimeter
G1 X186.711 Y96.934 E0.01884 ; perimeter
G1 X186.274 Y97.085 E0.01903 ; perimeter
G1 X185.864 Y97.299 E0.01907 ; perimeter
G1 X185.563 Y97.513 E0.01520 ; perimeter
G1 X167.976 Y112.267 E0.94569 ; perimeter
G1 X162.839 Y112.267 E0.21163 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X150.392 Y119.580 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.935 Y113.202 E0.27909 ; perimeter
G1 X150.344 Y113.121 E0.01717 ; perimeter
G1 X152.660 Y113.121 E0.09541 ; perimeter
G1 X152.660 Y118.648 E0.22772 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X184.915 Y96.837 E0.92916 ; perimeter
G1 X185.345 Y96.516 E0.02211 ; perimeter
G1 X185.795 Y96.254 E0.02148 ; perimeter
G1 X186.266 Y96.048 E0.02118 ; perimeter
G1 X186.746 Y95.902 E0.02065 ; perimeter
G1 X187.226 Y95.819 E0.02007 ; perimeter
G1 X187.701 Y95.798 E0.01961 ; perimeter
G1 X187.932 Y95.810 E0.00954 ; perimeter
G1 X188.388 Y95.884 E0.01902 ; perimeter
G1 X188.580 Y95.941 E0.00825 ; perimeter
G1 X188.801 Y96.017 E0.00964 ; perimeter
G1 X189.185 Y96.208 E0.01766 ; perimeter
G1 X189.523 Y96.452 E0.01716 ; perimeter
G1 X189.832 Y96.766 E0.01815 ; perimeter
G1 X188.699 Y97.716 E0.06089 ; perimeter
G1 X188.604 Y97.625 E0.00544 ; perimeter
G1 X188.297 Y97.434 E0.01489 ; perimeter
G1 X187.953 Y97.306 E0.01513 ; perimeter
G1 X187.583 Y97.244 E0.01546 ; perimeter
G1 X187.198 Y97.249 E0.01584 ; perimeter
G1 X186.811 Y97.318 E0.01621 ; perimeter
G1 X186.432 Y97.450 E0.01654 ; perimeter
G1 X186.072 Y97.638 E0.01674 ; perimeter
G1 X185.806 Y97.827 E0.01344 ; perimeter
G1 X168.120 Y112.663 E0.95099 ; perimeter
M73 Q73 S37
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X149.995 Y119.976 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.074 Y119.601 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.966 Y116.685 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X150.843 Y119.016 ; move to first infill point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7587.78
G1 X151.552 Y118.308 E0.04941 ; infill
G1 X151.552 Y117.637 E0.03309 ; infill
G1 X151.044 Y118.144 E0.03540 ; infill
G1 X151.044 Y117.473 E0.03309 ; infill
G1 X151.552 Y116.966 E0.03540 ; infill
G1 X151.552 Y116.295 E0.03309 ; infill
G1 X151.044 Y116.802 E0.03540 ; infill
G1 X151.044 Y116.131 E0.03309 ; infill
G1 X151.552 Y115.624 E0.03540 ; infill
G1 X151.552 Y114.953 E0.03309 ; infill
G1 X151.044 Y115.460 E0.03540 ; infill
G1 X151.044 Y114.789 E0.03309 ; infill
G1 X151.752 Y114.081 E0.04941 ; infill
G1 F8640
G1 X151.044 Y114.789 E-0.23135 ; wipe and retract
G1 X151.044 Y115.460 E-0.15493 ; wipe and retract
G1 X151.552 Y114.953 E-0.16576 ; wipe and retract
G1 X151.552 Y115.624 E-0.15493 ; wipe and retract
G1 X151.389 Y115.786 E-0.05303 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X193.718 Y108.240 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X193.374 Y107.830 E0.02205 ; perimeter
G1 X195.932 Y105.684 E0.13758 ; perimeter
G1 X192.521 Y101.619 E0.21861 ; perimeter
G1 X189.963 Y103.765 E0.13758 ; perimeter
G1 X189.618 Y103.355 E0.02205 ; perimeter
G1 X192.177 Y101.208 E0.13758 ; perimeter
G1 X189.728 Y98.290 E0.15696 ; perimeter
G1 X190.235 Y97.864 E0.02729 ; perimeter
G1 X199.233 Y108.587 E0.57663 ; perimeter
G1 X198.725 Y109.012 E0.02729 ; perimeter
G1 X196.276 Y106.094 E0.15696 ; perimeter
G1 X193.764 Y108.202 E0.13511 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.669 Y108.799 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X192.815 Y107.781 E0.05471 ; perimeter
G1 X195.374 Y105.635 E0.13758 ; perimeter
G1 X192.472 Y102.177 E0.18596 ; perimeter
G1 X189.914 Y104.324 E0.13758 ; perimeter
G1 X189.060 Y103.306 E0.05471 ; perimeter
G1 X191.618 Y101.160 E0.13758 ; perimeter
G1 X189.169 Y98.241 E0.15696 ; perimeter
G1 X190.284 Y97.306 E0.05995 ; perimeter
G1 X199.791 Y108.635 E0.60929 ; perimeter
G1 X198.676 Y109.571 E0.05995 ; perimeter
G1 X196.227 Y106.652 E0.15696 ; perimeter
G1 X193.715 Y108.760 E0.13511 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.712 Y108.401 F10800.000 ; move inwards before travel
G1 F8640
G1 X192.815 Y107.781 E-0.30695 ; wipe and retract
G1 X194.318 Y106.520 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X151.651 Y138.884 ; move to first perimeter point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X151.651 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E0.82278 ; perimeter
G1 X199.851 Y114.663 E1.51798 ; perimeter
G1 X200.171 Y114.354 E0.01834 ; perimeter
G1 X200.455 Y113.985 E0.01917 ; perimeter
G1 X200.680 Y113.581 E0.01903 ; perimeter
G1 X200.837 Y113.152 E0.01884 ; perimeter
G1 X200.921 Y112.707 E0.01864 ; perimeter
G1 X200.925 Y112.259 E0.01847 ; perimeter
G1 X200.845 Y111.821 E0.01834 ; perimeter
G1 X200.681 Y111.412 E0.01815 ; perimeter
G1 X200.482 Y111.110 E0.01490 ; perimeter
G1 X199.686 Y110.160 E0.05106 ; perimeter
G1 X200.195 Y109.733 E0.02733 ; perimeter
G1 X201.085 Y110.794 E0.05705 ; perimeter
G1 X201.299 Y111.098 E0.01532 ; perimeter
G1 X201.453 Y111.414 E0.01450 ; perimeter
G1 X201.558 Y111.769 E0.01525 ; perimeter
G1 X201.607 Y112.131 E0.01503 ; perimeter
G1 X201.602 Y112.547 E0.01713 ; perimeter
G1 X201.579 Y112.736 E0.00786 ; perimeter
G1 X201.486 Y113.157 E0.01776 ; perimeter
G1 X201.337 Y113.568 E0.01802 ; perimeter
G1 X201.131 Y113.976 E0.01882 ; perimeter
G1 X200.876 Y114.358 E0.01893 ; perimeter
G1 X200.565 Y114.726 E0.01985 ; perimeter
G1 X200.199 Y115.070 E0.02068 ; perimeter
G1 X171.819 Y138.884 E1.52621 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X151.711 Y138.884 E0.55007 ; perimeter
M204 S1000 ; adjust acceleration
G1 X151.255 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X151.255 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E0.83316 ; perimeter
G1 X199.586 Y114.369 E1.51146 ; perimeter
G1 X199.874 Y114.089 E0.01657 ; perimeter
G1 X200.123 Y113.766 E0.01678 ; perimeter
G1 X200.318 Y113.416 E0.01654 ; perimeter
G1 X200.454 Y113.046 E0.01621 ; perimeter
G1 X200.525 Y112.668 E0.01584 ; perimeter
G1 X200.528 Y112.293 E0.01546 ; perimeter
G1 X200.462 Y111.932 E0.01513 ; perimeter
G1 X200.328 Y111.597 E0.01485 ; perimeter
G1 X200.163 Y111.347 E0.01233 ; perimeter
G1 X199.128 Y110.110 E0.06644 ; perimeter
G1 X200.244 Y109.175 E0.05997 ; perimeter
G1 X201.399 Y110.552 E0.07406 ; perimeter
G1 X201.642 Y110.896 E0.01734 ; perimeter
G1 X201.823 Y111.271 E0.01716 ; perimeter
G1 X201.946 Y111.681 E0.01766 ; perimeter
G1 X202.004 Y112.112 E0.01788 ; perimeter
G1 X201.998 Y112.573 E0.01902 ; perimeter
G1 X201.970 Y112.803 E0.00954 ; perimeter
G1 X201.867 Y113.268 E0.01961 ; perimeter
G1 X201.702 Y113.726 E0.02007 ; perimeter
G1 X201.474 Y114.174 E0.02070 ; perimeter
G1 X201.192 Y114.599 E0.02104 ; perimeter
G1 X200.853 Y115.000 E0.02161 ; perimeter
G1 X200.462 Y115.367 E0.02207 ; perimeter
G1 X171.963 Y139.280 E1.53262 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X151.315 Y139.280 E0.55008 ; perimeter
M204 S1000 ; adjust acceleration
G1 X151.466 Y138.941 F10800.000 ; move inwards before travel
G1 F8640
G1 X151.255 Y137.952 E-0.30695 ; wipe and retract
G1 X153.217 Y137.952 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
G1 X166.558 Y138.860 ; move to first infill point
G1 Z16.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.776 Y139.642 E0.05566 ; infill
G1 X165.776 Y140.077 E0.02188 ; infill
G1 X166.026 Y140.077 E0.01260 ; infill
G1 X167.042 Y139.061 E0.07230 ; infill
G1 X167.727 Y139.061 E0.03448 ; infill
G1 X166.711 Y140.077 E0.07230 ; infill
G1 X167.396 Y140.077 E0.03448 ; infill
G1 X168.412 Y139.061 E0.07230 ; infill
G1 X169.097 Y139.061 E0.03448 ; infill
G1 X168.081 Y140.077 E0.07230 ; infill
G1 X168.766 Y140.077 E0.03448 ; infill
G1 X169.459 Y139.384 E0.04931 ; infill
G1 X169.459 Y140.069 E0.03448 ; infill
G1 X169.250 Y140.278 E0.01484 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;16.25


G1 F8640
G1 X169.459 Y140.069 E-0.06809 ; wipe and retract
G1 X169.459 Y139.384 E-0.15815 ; wipe and retract
G1 X168.766 Y140.077 E-0.22616 ; wipe and retract
G1 X168.081 Y140.077 E-0.15815 ; wipe and retract
G1 X168.539 Y139.619 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;16.25
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X97.793 Y100.738 ; move to first perimeter point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.54138 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X49.382 Y76.811 E1.53343 ; perimeter
G1 X49.017 Y76.469 E0.02062 ; perimeter
G1 X48.709 Y76.105 E0.01962 ; perimeter
G1 X48.451 Y75.718 E0.01919 ; perimeter
G1 X48.246 Y75.314 E0.01864 ; perimeter
G1 X48.097 Y74.904 E0.01798 ; perimeter
G1 X48.003 Y74.485 E0.01770 ; perimeter
G1 X47.978 Y74.282 E0.00844 ; perimeter
G1 X47.974 Y73.876 E0.01672 ; perimeter
G1 X48.025 Y73.501 E0.01557 ; perimeter
G1 X48.129 Y73.154 E0.01493 ; perimeter
G1 X48.282 Y72.838 E0.01446 ; perimeter
G1 X48.496 Y72.535 E0.01528 ; perimeter
G1 X49.386 Y71.474 E0.05705 ; perimeter
G1 X49.894 Y71.900 E0.02729 ; perimeter
G1 X49.129 Y72.812 E0.04901 ; perimeter
G1 X48.901 Y73.151 E0.01685 ; perimeter
G1 X48.736 Y73.562 E0.01826 ; perimeter
G1 X48.656 Y74.000 E0.01834 ; perimeter
G1 X48.660 Y74.448 E0.01847 ; perimeter
G1 X48.744 Y74.893 E0.01864 ; perimeter
G1 X48.901 Y75.323 E0.01884 ; perimeter
G1 X49.126 Y75.726 E0.01903 ; perimeter
G1 X49.410 Y76.095 E0.01917 ; perimeter
G1 X49.730 Y76.405 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.52520 ; perimeter
G1 X97.795 Y100.203 E0.81174 ; perimeter
G1 X97.793 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X98.187 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.54131 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03671 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X49.118 Y77.108 E1.53983 ; perimeter
G1 X48.729 Y76.742 E0.02200 ; perimeter
G1 X48.392 Y76.344 E0.02148 ; perimeter
G1 X48.108 Y75.918 E0.02110 ; perimeter
G1 X47.881 Y75.472 E0.02060 ; perimeter
G1 X47.716 Y75.016 E0.02002 ; perimeter
G1 X47.612 Y74.552 E0.01955 ; perimeter
G1 X47.582 Y74.308 E0.01015 ; perimeter
G1 X47.577 Y73.851 E0.01883 ; perimeter
G1 X47.636 Y73.417 E0.01804 ; perimeter
G1 X47.758 Y73.010 E0.01750 ; perimeter
G1 X47.939 Y72.636 E0.01712 ; perimeter
G1 X48.182 Y72.293 E0.01730 ; perimeter
G1 X49.337 Y70.916 E0.07406 ; perimeter
G1 X50.452 Y71.851 E0.05995 ; perimeter
G1 X49.446 Y73.050 E0.06447 ; perimeter
G1 X49.253 Y73.338 E0.01426 ; perimeter
G1 X49.118 Y73.673 E0.01489 ; perimeter
G1 X49.052 Y74.034 E0.01513 ; perimeter
G1 X49.056 Y74.410 E0.01546 ; perimeter
G1 X49.127 Y74.787 E0.01584 ; perimeter
G1 X49.263 Y75.157 E0.01621 ; perimeter
G1 X49.458 Y75.508 E0.01654 ; perimeter
G1 X49.706 Y75.830 E0.01678 ; perimeter
G1 X49.995 Y76.110 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.51867 ; perimeter
G1 X98.194 Y99.806 E0.82220 ; perimeter
G1 X98.188 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X97.787 Y101.125 F10800.000 ; move inwards before travel
G1 F8640
G1 X94.896 Y101.089 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X84.140 Y101.697 ; move to first infill point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X83.358 Y100.915 E0.05567 ; infill
G1 X82.673 Y100.915 E0.03448 ; infill
G1 X83.688 Y101.931 E0.07230 ; infill
G1 X83.003 Y101.931 E0.03448 ; infill
G1 X81.988 Y100.915 E0.07230 ; infill
G1 X81.303 Y100.915 E0.03448 ; infill
G1 X82.318 Y101.931 E0.07230 ; infill
G1 X81.634 Y101.931 E0.03448 ; infill
G1 X80.618 Y100.915 E0.07230 ; infill
G1 X80.256 Y100.915 E0.01821 ; infill
G1 X80.256 Y101.238 E0.01627 ; infill
G1 X80.949 Y101.931 E0.04930 ; infill
G1 X80.264 Y101.931 E0.03448 ; infill
G1 X80.055 Y101.722 E0.01483 ; infill
G1 F8640
G1 X80.264 Y101.931 E-0.06804 ; wipe and retract
G1 X80.949 Y101.931 E-0.15815 ; wipe and retract
G1 X80.256 Y101.238 E-0.22612 ; wipe and retract
G1 X80.256 Y100.915 E-0.07462 ; wipe and retract
G1 X80.618 Y100.915 E-0.08353 ; wipe and retract
G1 X81.076 Y101.373 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X55.858 Y69.978 ; move to first perimeter point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X53.305 Y67.835 E0.13731 ; perimeter
G1 X50.856 Y70.754 E0.15696 ; perimeter
G1 X50.348 Y70.328 E0.02729 ; perimeter
G1 X59.345 Y59.605 E0.57663 ; perimeter
G1 X59.853 Y60.031 E0.02729 ; perimeter
G1 X57.404 Y62.950 E0.15696 ; perimeter
G1 X59.957 Y65.092 E0.13731 ; perimeter
G1 X59.613 Y65.502 E0.02205 ; perimeter
G1 X57.060 Y63.360 E0.13731 ; perimeter
G1 X53.649 Y67.425 E0.21861 ; perimeter
G1 X56.202 Y69.567 E0.13731 ; perimeter
G1 X55.897 Y69.932 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.907 Y70.536 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X53.354 Y68.393 E0.13731 ; perimeter
G1 X50.905 Y71.312 E0.15696 ; perimeter
G1 X49.790 Y70.377 E0.05995 ; perimeter
G1 X59.297 Y59.047 E0.60929 ; perimeter
G1 X60.411 Y59.982 E0.05995 ; perimeter
G1 X57.962 Y62.901 E0.15696 ; perimeter
G1 X60.516 Y65.043 E0.13731 ; perimeter
G1 X59.662 Y66.061 E0.05471 ; perimeter
G1 X57.109 Y63.918 E0.13731 ; perimeter
G1 X54.207 Y67.376 E0.18596 ; perimeter
G1 X56.760 Y69.519 E0.13731 ; perimeter
G1 X55.945 Y70.490 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.635 Y70.242 F10800.000 ; move inwards before travel
G1 F8640
G1 X53.386 Y68.420 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X98.987 Y81.038 ; move to first perimeter point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y81.038 E0.04695 ; perimeter
G1 X97.847 Y75.592 E0.22433 ; perimeter
G1 X98.453 Y75.592 E0.02493 ; perimeter
G1 X98.987 Y75.701 E0.02247 ; perimeter
G1 X98.987 Y80.978 E0.21736 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.591 Y81.434 E0.15621 ; perimeter
G1 X86.876 Y74.121 E0.46869 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X64.080 Y59.303 E0.94967 ; perimeter
G1 X63.719 Y59.042 E0.01834 ; perimeter
G1 X63.307 Y58.826 E0.01917 ; perimeter
G1 X62.870 Y58.675 E0.01903 ; perimeter
G1 X62.420 Y58.594 E0.01884 ; perimeter
G1 X61.967 Y58.589 E0.01864 ; perimeter
G1 X61.525 Y58.663 E0.01847 ; perimeter
G1 X61.108 Y58.818 E0.01834 ; perimeter
G1 X60.894 Y58.951 E0.01038 ; perimeter
G1 X60.336 Y58.482 E0.03002 ; perimeter
G1 X60.600 Y58.291 E0.01346 ; perimeter
G1 X60.924 Y58.128 E0.01493 ; perimeter
G1 X61.292 Y58.010 E0.01590 ; perimeter
G1 X61.665 Y57.949 E0.01561 ; perimeter
G1 X62.103 Y57.938 E0.01801 ; perimeter
G1 X62.309 Y57.954 E0.00855 ; perimeter
G1 X62.748 Y58.031 E0.01835 ; perimeter
G1 X63.181 Y58.163 E0.01864 ; perimeter
G1 X63.609 Y58.351 E0.01927 ; perimeter
G1 X64.017 Y58.589 E0.01943 ; perimeter
G1 X64.420 Y58.890 E0.02072 ; perimeter
G1 X81.934 Y73.586 E0.94185 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X95.786 Y80.899 E0.46869 ; perimeter
G1 X97.451 Y80.899 E0.06858 ; perimeter
G1 X97.451 Y75.196 E0.23493 ; perimeter
G1 X98.493 Y75.196 E0.04291 ; perimeter
G1 X99.383 Y75.378 E0.03745 ; perimeter
G1 X99.383 Y81.374 E0.24701 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.447 Y81.830 E0.17848 ; perimeter
G1 X86.732 Y74.517 E0.46869 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X63.836 Y59.616 E0.95503 ; perimeter
G1 X63.510 Y59.380 E0.01657 ; perimeter
G1 X63.149 Y59.191 E0.01678 ; perimeter
G1 X62.770 Y59.060 E0.01654 ; perimeter
G1 X62.382 Y58.990 E0.01621 ; perimeter
G1 X61.998 Y58.986 E0.01584 ; perimeter
G1 X61.628 Y59.048 E0.01546 ; perimeter
G1 X61.283 Y59.175 E0.01513 ; perimeter
G1 X60.976 Y59.366 E0.01489 ; perimeter
G1 X60.881 Y59.458 E0.00544 ; perimeter
G1 X59.749 Y58.508 E0.06089 ; perimeter
G1 X60.057 Y58.194 E0.01811 ; perimeter
G1 X60.394 Y57.951 E0.01712 ; perimeter
G1 X60.774 Y57.760 E0.01750 ; perimeter
G1 X61.193 Y57.626 E0.01816 ; perimeter
G1 X61.635 Y57.553 E0.01842 ; perimeter
G1 X62.113 Y57.542 E0.01970 ; perimeter
G1 X62.359 Y57.560 E0.01016 ; perimeter
G1 X62.841 Y57.645 E0.02015 ; perimeter
G1 X63.319 Y57.790 E0.02060 ; perimeter
G1 X63.788 Y57.996 E0.02112 ; perimeter
G1 X64.237 Y58.259 E0.02142 ; perimeter
G1 X64.666 Y58.579 E0.02204 ; perimeter
G1 X82.078 Y73.189 E0.93637 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X95.930 Y80.502 E0.46869 ; perimeter
G1 X97.055 Y80.502 E0.04631 ; perimeter
G1 X97.055 Y74.799 E0.23493 ; perimeter
G1 X98.533 Y74.799 E0.06089 ; perimeter
G1 X99.780 Y75.054 E0.05243 ; perimeter
G1 X99.780 Y81.770 E0.27667 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.422 Y81.651 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.488 Y81.816 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X97.962 Y79.947 ; move to first infill point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X98.671 Y80.655 E0.05009 ; infill
G1 X98.671 Y79.975 E0.03400 ; infill
G1 X98.163 Y79.468 E0.03589 ; infill
G1 X98.163 Y78.787 E0.03400 ; infill
G1 X98.671 Y79.295 E0.03589 ; infill
G1 X98.671 Y78.615 E0.03400 ; infill
G1 X98.163 Y78.107 E0.03589 ; infill
G1 X98.163 Y77.427 E0.03400 ; infill
G1 X98.671 Y77.935 E0.03589 ; infill
G1 X98.671 Y77.254 E0.03400 ; infill
G1 X98.163 Y76.747 E0.03589 ; infill
G1 X98.163 Y76.067 E0.03400 ; infill
G1 X98.872 Y76.775 E0.05009 ; infill
G1 F8640
G1 X98.163 Y76.067 E-0.23135 ; wipe and retract
G1 X98.163 Y76.747 E-0.15705 ; wipe and retract
G1 X98.671 Y77.254 E-0.16576 ; wipe and retract
G1 X98.671 Y77.935 E-0.15705 ; wipe and retract
G1 X98.522 Y77.785 E-0.04878 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.659 Y87.432 E0.10375 ; perimeter
G1 X77.003 Y87.022 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.10375 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X83.680 Y79.065 E0.10375 ; perimeter
G1 X84.024 Y78.655 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.10375 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X76.101 Y87.481 E0.10375 ; perimeter
G1 X76.955 Y86.464 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.10375 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X83.122 Y79.114 E0.10375 ; perimeter
G1 X83.975 Y78.097 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.10375 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 P73 R35
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X165.976 Y78.655 E0.10375 ; perimeter
G1 X166.320 Y79.065 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.10375 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X172.997 Y87.022 E0.10375 ; perimeter
G1 X173.341 Y87.432 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.10375 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X166.025 Y78.097 E0.10375 ; perimeter
G1 X166.878 Y79.114 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.10375 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X173.045 Y86.464 E0.10375 ; perimeter
G1 X173.899 Y87.481 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.10375 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X151.013 Y81.038 ; move to first perimeter point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y75.701 E0.21983 ; perimeter
G1 X151.547 Y75.592 E0.02247 ; perimeter
G1 X152.153 Y75.592 E0.02493 ; perimeter
G1 X152.153 Y81.038 E0.22433 ; perimeter
G1 X151.073 Y81.038 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y81.434 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.617 Y75.378 E0.24948 ; perimeter
G1 X151.507 Y75.196 E0.03745 ; perimeter
G1 X152.549 Y75.196 E0.04291 ; perimeter
G1 X152.549 Y80.899 E0.23493 ; perimeter
G1 X154.214 Y80.899 E0.06858 ; perimeter
G1 X162.929 Y73.586 E0.46869 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X185.580 Y58.890 E0.94185 ; perimeter
G1 X185.983 Y58.589 E0.02072 ; perimeter
G1 X186.391 Y58.351 E0.01943 ; perimeter
G1 X186.819 Y58.163 E0.01927 ; perimeter
G1 X187.252 Y58.031 E0.01864 ; perimeter
G1 X187.682 Y57.956 E0.01798 ; perimeter
G1 X188.111 Y57.936 E0.01770 ; perimeter
G1 X188.315 Y57.947 E0.00844 ; perimeter
G1 X188.724 Y58.014 E0.01706 ; perimeter
G1 X189.070 Y58.126 E0.01498 ; perimeter
G1 X189.400 Y58.291 E0.01519 ; perimeter
G1 X189.664 Y58.482 E0.01346 ; perimeter
G1 X189.106 Y58.951 E0.03002 ; perimeter
G1 X188.892 Y58.818 E0.01039 ; perimeter
G1 X188.475 Y58.663 E0.01834 ; perimeter
G1 X188.033 Y58.589 E0.01847 ; perimeter
G1 X187.580 Y58.594 E0.01864 ; perimeter
G1 X187.130 Y58.675 E0.01884 ; perimeter
G1 X186.693 Y58.826 E0.01903 ; perimeter
G1 X186.283 Y59.041 E0.01908 ; perimeter
G1 X185.979 Y59.258 E0.01539 ; perimeter
G1 X168.261 Y74.121 E0.95270 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X154.409 Y81.434 E0.46869 ; perimeter
G1 X150.677 Y81.434 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y81.830 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X150.220 Y75.054 E0.27914 ; perimeter
G1 X151.467 Y74.799 E0.05243 ; perimeter
G1 X152.945 Y74.799 E0.06089 ; perimeter
G1 X152.945 Y80.502 E0.23493 ; perimeter
G1 X154.070 Y80.502 E0.04631 ; perimeter
G1 X162.785 Y73.189 E0.46869 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X185.334 Y58.579 E0.93637 ; perimeter
G1 X185.763 Y58.259 E0.02204 ; perimeter
G1 X186.212 Y57.996 E0.02142 ; perimeter
G1 X186.681 Y57.790 E0.02112 ; perimeter
G1 X187.159 Y57.645 E0.02060 ; perimeter
G1 X187.638 Y57.561 E0.02002 ; perimeter
G1 X188.112 Y57.539 E0.01955 ; perimeter
G1 X188.358 Y57.552 E0.01015 ; perimeter
G1 X188.812 Y57.627 E0.01895 ; perimeter
G1 X188.990 Y57.679 E0.00761 ; perimeter
G1 X189.224 Y57.759 E0.01022 ; perimeter
G1 X189.606 Y57.951 E0.01760 ; perimeter
G1 X189.943 Y58.194 E0.01712 ; perimeter
G1 X190.251 Y58.508 E0.01811 ; perimeter
G1 X189.119 Y59.458 E0.06089 ; perimeter
G1 X189.024 Y59.366 E0.00544 ; perimeter
G1 X188.717 Y59.175 E0.01489 ; perimeter
G1 X188.372 Y59.048 E0.01513 ; perimeter
G1 X188.002 Y58.986 E0.01546 ; perimeter
G1 X187.618 Y58.990 E0.01584 ; perimeter
G1 X187.230 Y59.060 E0.01621 ; perimeter
G1 X186.851 Y59.191 E0.01654 ; perimeter
G1 X186.491 Y59.379 E0.01674 ; perimeter
G1 X186.221 Y59.571 E0.01363 ; perimeter
G1 X168.405 Y74.517 E0.95800 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X154.553 Y81.830 E0.46869 ; perimeter
G1 X150.280 Y81.830 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.359 Y81.455 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.251 Y78.539 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X151.128 Y79.932 ; move to first infill point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X151.837 Y80.640 E0.05084 ; infill
G1 X151.837 Y79.950 E0.03503 ; infill
G1 X151.329 Y79.442 E0.03643 ; infill
G1 X151.329 Y78.752 E0.03503 ; infill
G1 X151.837 Y79.259 E0.03643 ; infill
G1 X151.837 Y78.569 E0.03503 ; infill
G1 X151.329 Y78.061 E0.03643 ; infill
G1 X151.329 Y77.371 E0.03503 ; infill
G1 X151.837 Y77.878 E0.03643 ; infill
G1 X151.837 Y77.188 E0.03503 ; infill
G1 X151.329 Y76.680 E0.03643 ; infill
G1 X151.329 Y75.990 E0.03503 ; infill
G1 X152.038 Y76.698 E0.05084 ; infill
G1 F8640
G1 X151.329 Y75.990 E-0.23135 ; wipe and retract
G1 X151.329 Y76.680 E-0.15942 ; wipe and retract
G1 X151.837 Y77.188 E-0.16576 ; wipe and retract
G1 X151.837 Y77.878 E-0.15942 ; wipe and retract
G1 X151.702 Y77.743 E-0.04405 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X194.142 Y69.978 ; move to first perimeter point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X193.798 Y69.567 E0.02205 ; perimeter
G1 X196.351 Y67.425 E0.13731 ; perimeter
G1 X192.940 Y63.360 E0.21861 ; perimeter
G1 X190.387 Y65.502 E0.13731 ; perimeter
G1 X190.043 Y65.092 E0.02205 ; perimeter
G1 X192.596 Y62.950 E0.13731 ; perimeter
G1 X190.147 Y60.031 E0.15696 ; perimeter
G1 X190.655 Y59.605 E0.02729 ; perimeter
G1 X199.652 Y70.328 E0.57663 ; perimeter
G1 X199.144 Y70.754 E0.02729 ; perimeter
G1 X196.695 Y67.835 E0.15696 ; perimeter
G1 X194.188 Y69.939 E0.13483 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.093 Y70.536 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X193.240 Y69.519 E0.05471 ; perimeter
G1 X195.793 Y67.376 E0.13731 ; perimeter
G1 X192.891 Y63.918 E0.18596 ; perimeter
G1 X190.338 Y66.061 E0.13731 ; perimeter
G1 X189.484 Y65.043 E0.05471 ; perimeter
G1 X192.038 Y62.901 E0.13731 ; perimeter
G1 X189.589 Y59.982 E0.15696 ; perimeter
G1 X190.703 Y59.047 E0.05995 ; perimeter
G1 X200.210 Y70.377 E0.60929 ; perimeter
G1 X199.095 Y71.312 E0.05995 ; perimeter
G1 X196.646 Y68.393 E0.15696 ; perimeter
G1 X194.139 Y70.497 E0.13483 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.137 Y70.138 F10800.000 ; move inwards before travel
G1 F8640
G1 X193.240 Y69.519 E-0.30695 ; wipe and retract
G1 X194.743 Y68.257 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X152.207 Y100.738 ; move to first perimeter point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X152.205 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E0.81174 ; perimeter
G1 X200.270 Y76.405 E1.52519 ; perimeter
G1 X200.590 Y76.095 E0.01834 ; perimeter
G1 X200.874 Y75.726 E0.01917 ; perimeter
G1 X201.099 Y75.323 E0.01903 ; perimeter
G1 X201.256 Y74.893 E0.01884 ; perimeter
G1 X201.340 Y74.448 E0.01864 ; perimeter
G1 X201.344 Y74.000 E0.01847 ; perimeter
G1 X201.264 Y73.562 E0.01834 ; perimeter
G1 X201.100 Y73.153 E0.01816 ; perimeter
G1 X200.899 Y72.849 E0.01504 ; perimeter
G1 X200.106 Y71.901 E0.05092 ; perimeter
G1 X200.614 Y71.474 E0.02733 ; perimeter
G1 X201.504 Y72.535 E0.05705 ; perimeter
G1 X201.718 Y72.838 E0.01528 ; perimeter
G1 X201.871 Y73.154 E0.01446 ; perimeter
G1 X201.977 Y73.507 E0.01519 ; perimeter
G1 X202.027 Y73.867 E0.01498 ; perimeter
G1 X202.022 Y74.282 E0.01706 ; perimeter
G1 X201.997 Y74.485 E0.00844 ; perimeter
G1 X201.903 Y74.904 E0.01770 ; perimeter
G1 X201.754 Y75.314 E0.01798 ; perimeter
G1 X201.548 Y75.721 E0.01879 ; perimeter
G1 X201.294 Y76.102 E0.01888 ; perimeter
G1 X200.983 Y76.469 E0.01979 ; perimeter
G1 X200.618 Y76.811 E0.02062 ; perimeter
G1 X172.104 Y100.738 E1.53343 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X152.267 Y100.738 E0.53891 ; perimeter
M204 S1000 ; adjust acceleration
G1 X151.813 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X151.806 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E0.82220 ; perimeter
G1 X200.005 Y76.110 E1.51867 ; perimeter
G1 X200.294 Y75.830 E0.01657 ; perimeter
G1 X200.542 Y75.508 E0.01678 ; perimeter
G1 X200.737 Y75.157 E0.01654 ; perimeter
G1 X200.873 Y74.787 E0.01621 ; perimeter
G1 X200.944 Y74.410 E0.01584 ; perimeter
G1 X200.948 Y74.034 E0.01546 ; perimeter
G1 X200.882 Y73.673 E0.01513 ; perimeter
G1 X200.747 Y73.338 E0.01485 ; perimeter
G1 X200.581 Y73.086 E0.01246 ; perimeter
G1 X199.548 Y71.852 E0.06630 ; perimeter
G1 X200.663 Y70.916 E0.05996 ; perimeter
G1 X201.818 Y72.293 E0.07406 ; perimeter
G1 X202.061 Y72.636 E0.01730 ; perimeter
G1 X202.242 Y73.010 E0.01712 ; perimeter
G1 X202.364 Y73.419 E0.01760 ; perimeter
G1 X202.423 Y73.848 E0.01783 ; perimeter
G1 X202.418 Y74.308 E0.01895 ; perimeter
G1 X202.388 Y74.552 E0.01015 ; perimeter
G1 X202.284 Y75.016 E0.01955 ; perimeter
G1 X202.119 Y75.472 E0.02002 ; perimeter
G1 X201.891 Y75.919 E0.02065 ; perimeter
G1 X201.609 Y76.343 E0.02098 ; perimeter
G1 X201.271 Y76.742 E0.02154 ; perimeter
G1 X200.882 Y77.108 E0.02200 ; perimeter
G1 X172.248 Y101.134 E1.53983 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X151.873 Y101.134 E0.53883 ; perimeter
M204 S1000 ; adjust acceleration
G1 X152.023 Y100.794 F10800.000 ; move inwards before travel
G1 F8640
G1 X151.806 Y99.806 E-0.30702 ; wipe and retract
G1 X153.768 Y99.806 E-0.45298 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X165.860 Y101.722 ; move to first infill point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X166.069 Y101.931 E0.01484 ; infill
G1 X166.754 Y101.931 E0.03448 ; infill
G1 X166.061 Y101.238 E0.04930 ; infill
G1 X166.061 Y100.915 E0.01627 ; infill
G1 X166.423 Y100.915 E0.01821 ; infill
G1 X167.439 Y101.931 E0.07230 ; infill
G1 X168.124 Y101.931 E0.03448 ; infill
G1 X167.108 Y100.915 E0.07230 ; infill
G1 X167.793 Y100.915 E0.03448 ; infill
G1 X168.808 Y101.931 E0.07230 ; infill
G1 X169.493 Y101.931 E0.03448 ; infill
G1 X168.478 Y100.915 E0.07230 ; infill
G1 X169.163 Y100.915 E0.03448 ; infill
G1 X169.945 Y101.697 E0.05567 ; infill
G1 F8640
G1 X169.163 Y100.915 E-0.25535 ; wipe and retract
G1 X168.478 Y100.915 E-0.15815 ; wipe and retract
G1 X169.493 Y101.931 E-0.33164 ; wipe and retract
G1 X169.429 Y101.931 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X97.508 Y138.884 ; move to first perimeter point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.54138 ; perimeter
M73 Q74 S36
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X49.096 Y114.958 E1.53343 ; perimeter
G1 X48.732 Y114.615 E0.02062 ; perimeter
G1 X48.424 Y114.251 E0.01962 ; perimeter
G1 X48.165 Y113.864 E0.01919 ; perimeter
G1 X47.961 Y113.461 E0.01864 ; perimeter
G1 X47.812 Y113.050 E0.01798 ; perimeter
G1 X47.718 Y112.631 E0.01770 ; perimeter
G1 X47.693 Y112.428 E0.00844 ; perimeter
G1 X47.688 Y112.022 E0.01672 ; perimeter
G1 X47.740 Y111.647 E0.01557 ; perimeter
G1 X47.844 Y111.300 E0.01493 ; perimeter
G1 X47.997 Y110.984 E0.01446 ; perimeter
G1 X48.211 Y110.681 E0.01528 ; perimeter
G1 X49.101 Y109.621 E0.05705 ; perimeter
G1 X49.608 Y110.046 E0.02729 ; perimeter
G1 X48.844 Y110.958 E0.04901 ; perimeter
G1 X48.616 Y111.297 E0.01685 ; perimeter
G1 X48.450 Y111.708 E0.01826 ; perimeter
G1 X48.370 Y112.146 E0.01834 ; perimeter
G1 X48.374 Y112.595 E0.01847 ; perimeter
G1 X48.458 Y113.039 E0.01864 ; perimeter
G1 X48.616 Y113.469 E0.01884 ; perimeter
G1 X48.841 Y113.872 E0.01903 ; perimeter
G1 X49.125 Y114.241 E0.01917 ; perimeter
G1 X49.444 Y114.551 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.52520 ; perimeter
G1 X97.510 Y138.349 E0.81174 ; perimeter
G1 X97.508 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X97.902 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.54131 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03671 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X48.833 Y115.254 E1.53983 ; perimeter
G1 X48.444 Y114.888 E0.02200 ; perimeter
G1 X48.107 Y114.490 E0.02148 ; perimeter
G1 X47.823 Y114.064 E0.02110 ; perimeter
G1 X47.596 Y113.618 E0.02060 ; perimeter
G1 X47.430 Y113.162 E0.02002 ; perimeter
G1 X47.327 Y112.699 E0.01955 ; perimeter
G1 X47.297 Y112.454 E0.01015 ; perimeter
G1 X47.292 Y111.997 E0.01883 ; perimeter
G1 X47.351 Y111.563 E0.01804 ; perimeter
G1 X47.473 Y111.156 E0.01750 ; perimeter
G1 X47.654 Y110.782 E0.01712 ; perimeter
G1 X47.897 Y110.439 E0.01730 ; perimeter
G1 X49.052 Y109.062 E0.07406 ; perimeter
G1 X50.167 Y109.998 E0.05995 ; perimeter
G1 X49.161 Y111.196 E0.06447 ; perimeter
G1 X48.968 Y111.484 E0.01426 ; perimeter
G1 X48.833 Y111.819 E0.01489 ; perimeter
G1 X48.767 Y112.180 E0.01513 ; perimeter
G1 X48.771 Y112.556 E0.01546 ; perimeter
G1 X48.842 Y112.934 E0.01584 ; perimeter
G1 X48.977 Y113.303 E0.01621 ; perimeter
G1 X49.173 Y113.654 E0.01654 ; perimeter
G1 X49.421 Y113.976 E0.01678 ; perimeter
G1 X49.710 Y114.256 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.51867 ; perimeter
G1 X97.908 Y137.952 E0.82220 ; perimeter
G1 X97.902 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X97.502 Y139.272 F10800.000 ; move inwards before travel
G1 F8640
G1 X94.611 Y139.235 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X83.854 Y139.843 ; move to first infill point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X83.072 Y139.061 E0.05567 ; infill
G1 X82.388 Y139.061 E0.03448 ; infill
G1 X83.403 Y140.077 E0.07230 ; infill
G1 X82.718 Y140.077 E0.03448 ; infill
G1 X81.703 Y139.061 E0.07230 ; infill
G1 X81.018 Y139.061 E0.03448 ; infill
G1 X82.033 Y140.077 E0.07230 ; infill
G1 X81.348 Y140.077 E0.03448 ; infill
G1 X80.333 Y139.061 E0.07230 ; infill
G1 X79.971 Y139.061 E0.01821 ; infill
G1 X79.971 Y139.384 E0.01627 ; infill
G1 X80.663 Y140.077 E0.04930 ; infill
G1 X79.978 Y140.077 E0.03448 ; infill
G1 X79.770 Y139.868 E0.01483 ; infill
G1 F8640
G1 X79.978 Y140.077 E-0.06804 ; wipe and retract
G1 X80.663 Y140.077 E-0.15815 ; wipe and retract
G1 X79.971 Y139.384 E-0.22612 ; wipe and retract
G1 X79.971 Y139.061 E-0.07462 ; wipe and retract
G1 X80.333 Y139.061 E-0.08353 ; wipe and retract
G1 X80.791 Y139.519 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X55.573 Y108.124 ; move to first perimeter point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X53.020 Y105.981 E0.13731 ; perimeter
G1 X50.570 Y108.900 E0.15696 ; perimeter
G1 X50.063 Y108.474 E0.02729 ; perimeter
G1 X59.060 Y97.751 E0.57663 ; perimeter
G1 X59.568 Y98.177 E0.02729 ; perimeter
G1 X57.119 Y101.096 E0.15696 ; perimeter
G1 X59.672 Y103.238 E0.13731 ; perimeter
G1 X59.328 Y103.648 E0.02205 ; perimeter
G1 X56.775 Y101.506 E0.13731 ; perimeter
G1 X53.364 Y105.571 E0.21861 ; perimeter
G1 X55.917 Y107.714 E0.13731 ; perimeter
G1 X55.611 Y108.078 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.622 Y108.682 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X53.068 Y106.540 E0.13731 ; perimeter
G1 X50.619 Y109.458 E0.15696 ; perimeter
G1 X49.505 Y108.523 E0.05995 ; perimeter
G1 X59.011 Y97.193 E0.60929 ; perimeter
G1 X60.126 Y98.128 E0.05995 ; perimeter
G1 X57.677 Y101.047 E0.15696 ; perimeter
G1 X60.230 Y103.190 E0.13731 ; perimeter
G1 X59.377 Y104.207 E0.05471 ; perimeter
G1 X56.824 Y102.064 E0.13731 ; perimeter
G1 X53.922 Y105.522 E0.18596 ; perimeter
G1 X56.475 Y107.665 E0.13731 ; perimeter
G1 X55.660 Y108.636 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.350 Y108.388 F10800.000 ; move inwards before travel
G1 F8640
G1 X53.101 Y106.566 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X98.702 Y119.184 ; move to first perimeter point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y119.184 E0.04695 ; perimeter
G1 X97.562 Y113.738 E0.22433 ; perimeter
G1 X98.167 Y113.738 E0.02493 ; perimeter
G1 X98.702 Y113.848 E0.02247 ; perimeter
G1 X98.702 Y119.124 E0.21736 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X95.306 Y119.580 E0.15621 ; perimeter
G1 X86.591 Y112.267 E0.46869 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X63.794 Y97.449 E0.94967 ; perimeter
G1 X63.434 Y97.188 E0.01834 ; perimeter
G1 X63.021 Y96.972 E0.01917 ; perimeter
G1 X62.585 Y96.821 E0.01903 ; perimeter
G1 X62.135 Y96.740 E0.01884 ; perimeter
G1 X61.682 Y96.735 E0.01864 ; perimeter
G1 X61.240 Y96.809 E0.01847 ; perimeter
G1 X60.823 Y96.964 E0.01834 ; perimeter
G1 X60.609 Y97.097 E0.01038 ; perimeter
G1 X60.050 Y96.628 E0.03002 ; perimeter
G1 X60.315 Y96.437 E0.01346 ; perimeter
G1 X60.639 Y96.275 E0.01493 ; perimeter
G1 X61.006 Y96.156 E0.01590 ; perimeter
G1 X61.380 Y96.095 E0.01561 ; perimeter
G1 X61.817 Y96.085 E0.01801 ; perimeter
G1 X62.024 Y96.100 E0.00855 ; perimeter
G1 X62.463 Y96.177 E0.01835 ; perimeter
G1 X62.896 Y96.309 E0.01864 ; perimeter
G1 X63.324 Y96.497 E0.01927 ; perimeter
G1 X63.732 Y96.735 E0.01943 ; perimeter
G1 X64.135 Y97.036 E0.02072 ; perimeter
G1 X81.649 Y111.732 E0.94185 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X95.501 Y119.045 E0.46869 ; perimeter
G1 X97.166 Y119.045 E0.06858 ; perimeter
G1 X97.166 Y113.342 E0.23493 ; perimeter
G1 X98.207 Y113.342 E0.04291 ; perimeter
G1 X99.098 Y113.524 E0.03745 ; perimeter
G1 X99.098 Y119.520 E0.24701 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X95.162 Y119.976 E0.17848 ; perimeter
G1 X86.446 Y112.663 E0.46869 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X63.550 Y97.762 E0.95503 ; perimeter
G1 X63.225 Y97.526 E0.01657 ; perimeter
G1 X62.864 Y97.337 E0.01678 ; perimeter
G1 X62.485 Y97.206 E0.01654 ; perimeter
G1 X62.097 Y97.136 E0.01621 ; perimeter
G1 X61.713 Y97.132 E0.01584 ; perimeter
G1 X61.342 Y97.194 E0.01546 ; perimeter
G1 X60.998 Y97.321 E0.01513 ; perimeter
G1 X60.691 Y97.512 E0.01489 ; perimeter
G1 X60.596 Y97.604 E0.00544 ; perimeter
G1 X59.464 Y96.654 E0.06089 ; perimeter
G1 X59.772 Y96.340 E0.01811 ; perimeter
G1 X60.109 Y96.097 E0.01712 ; perimeter
G1 X60.489 Y95.907 E0.01750 ; perimeter
G1 X60.908 Y95.772 E0.01816 ; perimeter
G1 X61.350 Y95.699 E0.01842 ; perimeter
G1 X61.828 Y95.688 E0.01970 ; perimeter
G1 X62.073 Y95.706 E0.01016 ; perimeter
G1 X62.555 Y95.791 E0.02015 ; perimeter
G1 X63.034 Y95.937 E0.02060 ; perimeter
G1 X63.503 Y96.143 E0.02112 ; perimeter
G1 X63.952 Y96.405 E0.02142 ; perimeter
G1 X64.381 Y96.725 E0.02204 ; perimeter
G1 X81.793 Y111.335 E0.93637 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X95.645 Y118.648 E0.46869 ; perimeter
G1 X96.769 Y118.648 E0.04631 ; perimeter
G1 X96.769 Y112.946 E0.23493 ; perimeter
G1 X98.248 Y112.946 E0.06089 ; perimeter
G1 X99.494 Y113.201 E0.05243 ; perimeter
G1 X99.494 Y119.916 E0.27667 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.137 Y119.797 F10800.000 ; move inwards before travel
G1 F8640
G1 X96.203 Y119.962 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X97.677 Y118.093 ; move to first infill point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X98.386 Y118.801 E0.05009 ; infill
G1 X98.386 Y118.121 E0.03400 ; infill
G1 X97.878 Y117.614 E0.03589 ; infill
G1 X97.878 Y116.934 E0.03400 ; infill
G1 X98.386 Y117.441 E0.03589 ; infill
G1 X98.386 Y116.761 E0.03400 ; infill
G1 X97.878 Y116.253 E0.03589 ; infill
G1 X97.878 Y115.573 E0.03400 ; infill
G1 X98.386 Y116.081 E0.03589 ; infill
G1 X98.386 Y115.401 E0.03400 ; infill
G1 X97.878 Y114.893 E0.03589 ; infill
G1 X97.878 Y114.213 E0.03400 ; infill
G1 X98.587 Y114.921 E0.05009 ; infill
G1 F8640
G1 X97.878 Y114.213 E-0.23135 ; wipe and retract
G1 X97.878 Y114.893 E-0.15705 ; wipe and retract
G1 X98.386 Y115.401 E-0.16576 ; wipe and retract
G1 X98.386 Y116.081 E-0.15705 ; wipe and retract
G1 X98.236 Y115.931 E-0.04878 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X76.374 Y125.578 E0.10375 ; perimeter
G1 X76.718 Y125.168 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.10375 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X83.395 Y117.211 E0.10375 ; perimeter
G1 X83.739 Y116.801 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.10375 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.816 Y125.627 E0.10375 ; perimeter
G1 X76.669 Y124.610 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.10375 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X82.836 Y117.260 E0.10375 ; perimeter
G1 X83.690 Y116.243 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.10375 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X165.691 Y116.801 E0.10375 ; perimeter
G1 X166.035 Y117.211 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.10375 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X172.711 Y125.168 E0.10375 ; perimeter
G1 X173.055 Y125.578 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.10375 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X165.740 Y116.243 E0.10375 ; perimeter
G1 X166.593 Y117.260 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.10375 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X172.760 Y124.610 E0.10375 ; perimeter
G1 X173.614 Y125.627 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.10375 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X150.728 Y119.184 ; move to first perimeter point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y113.848 E0.21983 ; perimeter
G1 X151.262 Y113.738 E0.02247 ; perimeter
G1 X151.868 Y113.738 E0.02493 ; perimeter
G1 X151.868 Y119.184 E0.22433 ; perimeter
G1 X150.788 Y119.184 E0.04447 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y119.580 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X150.332 Y113.524 E0.24948 ; perimeter
G1 X151.222 Y113.342 E0.03745 ; perimeter
G1 X152.264 Y113.342 E0.04291 ; perimeter
G1 X152.264 Y119.045 E0.23493 ; perimeter
G1 X153.929 Y119.045 E0.06858 ; perimeter
G1 X162.644 Y111.732 E0.46869 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X185.295 Y97.036 E0.94185 ; perimeter
G1 X185.698 Y96.735 E0.02072 ; perimeter
G1 X186.105 Y96.497 E0.01943 ; perimeter
G1 X186.534 Y96.309 E0.01927 ; perimeter
G1 X186.967 Y96.177 E0.01864 ; perimeter
G1 X187.396 Y96.102 E0.01798 ; perimeter
G1 X187.826 Y96.082 E0.01770 ; perimeter
G1 X188.030 Y96.093 E0.00844 ; perimeter
G1 X188.439 Y96.160 E0.01706 ; perimeter
G1 X188.785 Y96.272 E0.01498 ; perimeter
G1 X189.114 Y96.437 E0.01519 ; perimeter
G1 X189.379 Y96.628 E0.01346 ; perimeter
G1 X188.821 Y97.097 E0.03002 ; perimeter
G1 X188.607 Y96.964 E0.01039 ; perimeter
G1 X188.190 Y96.809 E0.01834 ; perimeter
G1 X187.747 Y96.735 E0.01847 ; perimeter
G1 X187.295 Y96.740 E0.01864 ; perimeter
G1 X186.845 Y96.821 E0.01884 ; perimeter
G1 X186.408 Y96.972 E0.01903 ; perimeter
G1 X185.998 Y97.187 E0.01908 ; perimeter
G1 X185.694 Y97.404 E0.01539 ; perimeter
G1 X167.976 Y112.267 E0.95270 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X154.124 Y119.580 E0.46869 ; perimeter
G1 X150.392 Y119.580 E0.15374 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y119.976 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X149.935 Y113.201 E0.27914 ; perimeter
G1 X151.182 Y112.946 E0.05243 ; perimeter
G1 X152.660 Y112.946 E0.06089 ; perimeter
G1 X152.660 Y118.648 E0.23493 ; perimeter
G1 X153.784 Y118.648 E0.04631 ; perimeter
G1 X162.500 Y111.335 E0.46869 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X185.049 Y96.725 E0.93637 ; perimeter
G1 X185.477 Y96.405 E0.02204 ; perimeter
G1 X185.926 Y96.143 E0.02142 ; perimeter
G1 X186.396 Y95.937 E0.02112 ; perimeter
G1 X186.874 Y95.791 E0.02060 ; perimeter
G1 X187.353 Y95.707 E0.02002 ; perimeter
G1 X187.827 Y95.685 E0.01955 ; perimeter
G1 X188.073 Y95.698 E0.01015 ; perimeter
G1 X188.527 Y95.773 E0.01895 ; perimeter
G1 X188.704 Y95.825 E0.00761 ; perimeter
G1 X188.939 Y95.906 E0.01022 ; perimeter
G1 X189.321 Y96.097 E0.01760 ; perimeter
G1 X189.658 Y96.340 E0.01712 ; perimeter
G1 X189.966 Y96.654 E0.01811 ; perimeter
G1 X188.834 Y97.604 E0.06089 ; perimeter
G1 X188.738 Y97.512 E0.00544 ; perimeter
G1 X188.432 Y97.321 E0.01489 ; perimeter
G1 X188.087 Y97.194 E0.01513 ; perimeter
G1 X187.717 Y97.132 E0.01546 ; perimeter
G1 X187.332 Y97.136 E0.01584 ; perimeter
G1 X186.945 Y97.206 E0.01621 ; perimeter
G1 X186.566 Y97.337 E0.01654 ; perimeter
G1 X186.206 Y97.526 E0.01674 ; perimeter
G1 X185.936 Y97.718 E0.01363 ; perimeter
G1 X168.120 Y112.663 E0.95800 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X154.268 Y119.976 E0.46869 ; perimeter
G1 X149.995 Y119.976 E0.17601 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.074 Y119.601 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.966 Y116.685 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X150.843 Y118.078 ; move to first infill point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X151.552 Y118.786 E0.05084 ; infill
G1 X151.552 Y118.096 E0.03503 ; infill
G1 X151.044 Y117.588 E0.03643 ; infill
G1 X151.044 Y116.898 E0.03503 ; infill
G1 X151.552 Y117.405 E0.03643 ; infill
G1 X151.552 Y116.715 E0.03503 ; infill
G1 X151.044 Y116.207 E0.03643 ; infill
G1 X151.044 Y115.517 E0.03503 ; infill
G1 X151.552 Y116.024 E0.03643 ; infill
G1 X151.552 Y115.334 E0.03503 ; infill
G1 X151.044 Y114.826 E0.03643 ; infill
G1 X151.044 Y114.136 E0.03503 ; infill
G1 X151.752 Y114.844 E0.05084 ; infill
G1 F8640
G1 X151.044 Y114.136 E-0.23135 ; wipe and retract
G1 X151.044 Y114.826 E-0.15942 ; wipe and retract
G1 X151.552 Y115.334 E-0.16576 ; wipe and retract
G1 X151.552 Y116.024 E-0.15942 ; wipe and retract
G1 X151.417 Y115.890 E-0.04405 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X193.857 Y108.124 ; move to first perimeter point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X193.513 Y107.714 E0.02205 ; perimeter
G1 X196.066 Y105.571 E0.13731 ; perimeter
G1 X192.655 Y101.506 E0.21861 ; perimeter
G1 X190.102 Y103.648 E0.13731 ; perimeter
G1 X189.758 Y103.238 E0.02205 ; perimeter
G1 X192.311 Y101.096 E0.13731 ; perimeter
G1 X189.862 Y98.177 E0.15696 ; perimeter
G1 X190.369 Y97.751 E0.02729 ; perimeter
G1 X199.367 Y108.474 E0.57663 ; perimeter
G1 X198.859 Y108.900 E0.02729 ; perimeter
G1 X196.410 Y105.981 E0.15696 ; perimeter
G1 X193.903 Y108.085 E0.13483 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.808 Y108.682 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X192.954 Y107.665 E0.05471 ; perimeter
G1 X195.508 Y105.522 E0.13731 ; perimeter
G1 X192.606 Y102.064 E0.18596 ; perimeter
G1 X190.053 Y104.207 E0.13731 ; perimeter
G1 X189.199 Y103.190 E0.05471 ; perimeter
G1 X191.752 Y101.047 E0.13731 ; perimeter
G1 X189.303 Y98.128 E0.15696 ; perimeter
G1 X190.418 Y97.193 E0.05995 ; perimeter
G1 X199.925 Y108.523 E0.60929 ; perimeter
G1 X198.810 Y109.458 E0.05995 ; perimeter
G1 X196.361 Y106.540 E0.15696 ; perimeter
G1 X193.854 Y108.643 E0.13483 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.852 Y108.284 F10800.000 ; move inwards before travel
G1 F8640
G1 X192.954 Y107.665 E-0.30695 ; wipe and retract
G1 X194.457 Y106.404 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X151.922 Y138.884 ; move to first perimeter point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X151.919 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E0.81174 ; perimeter
G1 X199.985 Y114.551 E1.52519 ; perimeter
G1 X200.305 Y114.241 E0.01834 ; perimeter
G1 X200.589 Y113.872 E0.01917 ; perimeter
G1 X200.814 Y113.469 E0.01903 ; perimeter
G1 X200.971 Y113.039 E0.01884 ; perimeter
G1 X201.055 Y112.595 E0.01864 ; perimeter
G1 X201.059 Y112.146 E0.01847 ; perimeter
G1 X200.979 Y111.708 E0.01834 ; perimeter
G1 X200.815 Y111.299 E0.01816 ; perimeter
G1 X200.614 Y110.995 E0.01504 ; perimeter
G1 X199.821 Y110.047 E0.05092 ; perimeter
G1 X200.329 Y109.621 E0.02733 ; perimeter
G1 X201.219 Y110.681 E0.05705 ; perimeter
G1 X201.433 Y110.984 E0.01528 ; perimeter
G1 X201.586 Y111.300 E0.01446 ; perimeter
G1 X201.692 Y111.653 E0.01519 ; perimeter
G1 X201.741 Y112.014 E0.01498 ; perimeter
G1 X201.737 Y112.428 E0.01706 ; perimeter
G1 X201.712 Y112.631 E0.00844 ; perimeter
G1 X201.618 Y113.050 E0.01770 ; perimeter
G1 X201.469 Y113.461 E0.01798 ; perimeter
G1 X201.263 Y113.867 E0.01879 ; perimeter
G1 X201.008 Y114.248 E0.01888 ; perimeter
G1 X200.698 Y114.615 E0.01979 ; perimeter
G1 X200.333 Y114.958 E0.02062 ; perimeter
G1 X171.819 Y138.884 E1.53343 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X151.982 Y138.884 E0.53891 ; perimeter
M73 P74 R34
M204 S1000 ; adjust acceleration
G1 X151.528 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X151.521 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E0.82220 ; perimeter
G1 X199.720 Y114.256 E1.51867 ; perimeter
G1 X200.008 Y113.976 E0.01657 ; perimeter
G1 X200.257 Y113.654 E0.01678 ; perimeter
G1 X200.452 Y113.303 E0.01654 ; perimeter
G1 X200.588 Y112.934 E0.01621 ; perimeter
G1 X200.659 Y112.556 E0.01584 ; perimeter
G1 X200.663 Y112.180 E0.01546 ; perimeter
G1 X200.597 Y111.819 E0.01513 ; perimeter
G1 X200.462 Y111.485 E0.01485 ; perimeter
G1 X200.295 Y111.232 E0.01246 ; perimeter
G1 X199.263 Y109.998 E0.06630 ; perimeter
G1 X200.378 Y109.062 E0.05996 ; perimeter
G1 X201.533 Y110.439 E0.07406 ; perimeter
G1 X201.775 Y110.782 E0.01730 ; perimeter
G1 X201.957 Y111.156 E0.01712 ; perimeter
G1 X202.079 Y111.565 E0.01760 ; perimeter
G1 X202.138 Y111.994 E0.01783 ; perimeter
G1 X202.133 Y112.454 E0.01895 ; perimeter
G1 X202.103 Y112.699 E0.01015 ; perimeter
G1 X201.999 Y113.162 E0.01955 ; perimeter
G1 X201.833 Y113.618 E0.02002 ; perimeter
G1 X201.606 Y114.065 E0.02065 ; perimeter
G1 X201.324 Y114.489 E0.02098 ; perimeter
G1 X200.986 Y114.888 E0.02154 ; perimeter
G1 X200.597 Y115.254 E0.02200 ; perimeter
G1 X171.963 Y139.280 E1.53983 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X151.588 Y139.280 E0.53883 ; perimeter
M204 S1000 ; adjust acceleration
G1 X151.737 Y138.940 F10800.000 ; move inwards before travel
G1 F8640
G1 X151.521 Y137.952 E-0.30702 ; wipe and retract
G1 X153.483 Y137.952 E-0.45298 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
G1 X165.575 Y139.868 ; move to first infill point
G1 Z16.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F3600
G1 X165.784 Y140.077 E0.01484 ; infill
G1 X166.469 Y140.077 E0.03448 ; infill
G1 X165.776 Y139.384 E0.04930 ; infill
G1 X165.776 Y139.061 E0.01627 ; infill
G1 X166.138 Y139.061 E0.01821 ; infill
G1 X167.153 Y140.077 E0.07230 ; infill
G1 X167.838 Y140.077 E0.03448 ; infill
G1 X166.823 Y139.061 E0.07230 ; infill
G1 X167.508 Y139.061 E0.03448 ; infill
G1 X168.523 Y140.077 E0.07230 ; infill
G1 X169.208 Y140.077 E0.03448 ; infill
G1 X168.193 Y139.061 E0.07230 ; infill
G1 X168.878 Y139.061 E0.03448 ; infill
G1 X169.660 Y139.843 E0.05567 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;16.5


G1 F8640
G1 X168.878 Y139.061 E-0.25535 ; wipe and retract
G1 X168.193 Y139.061 E-0.15815 ; wipe and retract
G1 X169.208 Y140.077 E-0.33164 ; wipe and retract
G1 X169.144 Y140.077 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z16.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;16.5
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X97.533 Y100.738 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.53069 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X49.247 Y76.699 E1.54064 ; perimeter
G1 X48.884 Y76.357 E0.02056 ; perimeter
G1 X48.577 Y75.995 E0.01956 ; perimeter
G1 X48.319 Y75.609 E0.01914 ; perimeter
G1 X48.114 Y75.207 E0.01859 ; perimeter
G1 X47.964 Y74.797 E0.01794 ; perimeter
G1 X47.870 Y74.380 E0.01763 ; perimeter
G1 X47.843 Y74.163 E0.00902 ; perimeter
G1 X47.840 Y73.759 E0.01664 ; perimeter
G1 X47.891 Y73.386 E0.01552 ; perimeter
G1 X47.995 Y73.040 E0.01488 ; perimeter
G1 X48.148 Y72.725 E0.01442 ; perimeter
G1 X48.362 Y72.423 E0.01523 ; perimeter
G1 X49.252 Y71.362 E0.05706 ; perimeter
G1 X49.760 Y71.788 E0.02729 ; perimeter
G1 X48.995 Y72.699 E0.04901 ; perimeter
G1 X48.767 Y73.039 E0.01685 ; perimeter
G1 X48.601 Y73.450 E0.01826 ; perimeter
G1 X48.521 Y73.888 E0.01834 ; perimeter
G1 X48.526 Y74.336 E0.01847 ; perimeter
G1 X48.609 Y74.781 E0.01864 ; perimeter
G1 X48.767 Y75.210 E0.01884 ; perimeter
G1 X48.992 Y75.614 E0.01903 ; perimeter
G1 X49.276 Y75.982 E0.01917 ; perimeter
G1 X49.595 Y76.292 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.53241 ; perimeter
G1 X97.533 Y100.203 E0.80094 ; perimeter
G1 X97.533 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X97.929 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.53068 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03671 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X48.984 Y76.995 E1.54704 ; perimeter
G1 X48.596 Y76.631 E0.02194 ; perimeter
G1 X48.260 Y76.234 E0.02142 ; perimeter
G1 X47.976 Y75.809 E0.02104 ; perimeter
G1 X47.750 Y75.365 E0.02055 ; perimeter
G1 X47.583 Y74.910 E0.01997 ; perimeter
G1 X47.479 Y74.448 E0.01950 ; perimeter
G1 X47.447 Y74.189 E0.01076 ; perimeter
G1 X47.443 Y73.733 E0.01875 ; perimeter
G1 X47.503 Y73.301 E0.01798 ; perimeter
G1 X47.625 Y72.895 E0.01745 ; perimeter
G1 X47.806 Y72.522 E0.01707 ; perimeter
G1 X48.048 Y72.181 E0.01725 ; perimeter
G1 X49.203 Y70.803 E0.07406 ; perimeter
G1 X50.318 Y71.739 E0.05995 ; perimeter
G1 X49.312 Y72.938 E0.06447 ; perimeter
G1 X49.119 Y73.225 E0.01426 ; perimeter
G1 X48.984 Y73.560 E0.01489 ; perimeter
G1 X48.918 Y73.922 E0.01513 ; perimeter
G1 X48.922 Y74.297 E0.01546 ; perimeter
G1 X48.993 Y74.675 E0.01584 ; perimeter
G1 X49.128 Y75.044 E0.01621 ; perimeter
G1 X49.324 Y75.395 E0.01654 ; perimeter
G1 X49.572 Y75.718 E0.01678 ; perimeter
G1 X49.861 Y75.998 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.52588 ; perimeter
G1 X97.930 Y99.806 E0.81133 ; perimeter
G1 X97.929 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X97.530 Y101.125 F10800.000 ; move inwards before travel
G1 F8640
G1 X94.638 Y101.090 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X83.730 Y102.131 ; move to first infill point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.939 Y101.923 E0.01484 ; infill
G1 X83.939 Y101.238 E0.03448 ; infill
G1 X83.246 Y101.931 E0.04931 ; infill
G1 X82.561 Y101.931 E0.03448 ; infill
G1 X83.577 Y100.915 E0.07230 ; infill
G1 X82.892 Y100.915 E0.03448 ; infill
G1 X81.876 Y101.931 E0.07230 ; infill
G1 X81.191 Y101.931 E0.03448 ; infill
G1 X82.207 Y100.915 E0.07230 ; infill
G1 X81.522 Y100.915 E0.03448 ; infill
G1 X80.506 Y101.931 E0.07230 ; infill
G1 X80.256 Y101.931 E0.01260 ; infill
G1 X80.256 Y101.496 E0.02188 ; infill
G1 X81.038 Y100.714 E0.05566 ; infill
G1 F8640
G1 X80.256 Y101.496 E-0.25530 ; wipe and retract
G1 X80.256 Y101.931 E-0.10036 ; wipe and retract
G1 X80.506 Y101.931 E-0.05779 ; wipe and retract
G1 X81.522 Y100.915 E-0.33164 ; wipe and retract
G1 X81.587 Y100.915 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X55.719 Y69.861 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X53.171 Y67.723 E0.13703 ; perimeter
G1 X50.722 Y70.641 E0.15696 ; perimeter
G1 X50.214 Y70.215 E0.02729 ; perimeter
G1 X59.211 Y59.493 E0.57663 ; perimeter
G1 X59.719 Y59.919 E0.02729 ; perimeter
G1 X57.270 Y62.837 E0.15696 ; perimeter
G1 X59.818 Y64.975 E0.13703 ; perimeter
G1 X59.474 Y65.386 E0.02205 ; perimeter
G1 X56.926 Y63.247 E0.13703 ; perimeter
G1 X53.515 Y67.313 E0.21861 ; perimeter
G1 X56.063 Y69.451 E0.13703 ; perimeter
G1 X55.757 Y69.815 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.768 Y70.419 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X53.219 Y68.281 E0.13703 ; perimeter
G1 X50.770 Y71.200 E0.15696 ; perimeter
G1 X49.656 Y70.264 E0.05995 ; perimeter
G1 X59.162 Y58.934 E0.60929 ; perimeter
G1 X60.277 Y59.870 E0.05995 ; perimeter
G1 X57.828 Y62.788 E0.15696 ; perimeter
G1 X60.376 Y64.927 E0.13703 ; perimeter
G1 X59.523 Y65.944 E0.05471 ; perimeter
G1 X56.975 Y63.806 E0.13703 ; perimeter
G1 X54.073 Y67.264 E0.18596 ; perimeter
G1 X56.621 Y69.402 E0.13703 ; perimeter
G1 X55.806 Y70.373 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.496 Y70.125 F10800.000 ; move inwards before travel
G1 F8640
G1 X53.247 Y68.303 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X91.743 Y78.205 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.26174 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X63.945 Y59.190 E0.95688 ; perimeter
G1 X63.585 Y58.929 E0.01834 ; perimeter
G1 X63.173 Y58.714 E0.01917 ; perimeter
G1 X62.736 Y58.562 E0.01903 ; perimeter
G1 X62.286 Y58.482 E0.01884 ; perimeter
G1 X61.833 Y58.476 E0.01864 ; perimeter
G1 X61.391 Y58.550 E0.01847 ; perimeter
G1 X60.974 Y58.705 E0.01834 ; perimeter
G1 X60.760 Y58.838 E0.01039 ; perimeter
G1 X60.201 Y58.370 E0.03002 ; perimeter
G1 X60.465 Y58.179 E0.01338 ; perimeter
G1 X60.787 Y58.017 E0.01488 ; perimeter
G1 X61.153 Y57.899 E0.01582 ; perimeter
G1 X61.525 Y57.837 E0.01555 ; perimeter
G1 X61.960 Y57.826 E0.01794 ; perimeter
G1 X62.182 Y57.842 E0.00916 ; perimeter
G1 X62.619 Y57.920 E0.01828 ; perimeter
G1 X63.051 Y58.052 E0.01859 ; perimeter
G1 X63.478 Y58.240 E0.01923 ; perimeter
G1 X63.884 Y58.477 E0.01938 ; perimeter
G1 X64.286 Y58.777 E0.02065 ; perimeter
G1 X81.934 Y73.586 E0.94906 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X92.087 Y77.795 E0.26976 ; perimeter
G1 X91.782 Y78.159 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X91.792 Y78.763 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.27212 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X63.702 Y59.503 E0.96224 ; perimeter
G1 X63.376 Y59.267 E0.01657 ; perimeter
G1 X63.015 Y59.078 E0.01678 ; perimeter
G1 X62.636 Y58.947 E0.01654 ; perimeter
G1 X62.248 Y58.878 E0.01621 ; perimeter
G1 X61.864 Y58.873 E0.01584 ; perimeter
G1 X61.494 Y58.935 E0.01546 ; perimeter
G1 X61.149 Y59.063 E0.01513 ; perimeter
G1 X60.842 Y59.254 E0.01489 ; perimeter
G1 X60.747 Y59.345 E0.00544 ; perimeter
G1 X59.615 Y58.395 E0.06089 ; perimeter
G1 X59.922 Y58.083 E0.01806 ; perimeter
G1 X60.258 Y57.840 E0.01707 ; perimeter
G1 X60.636 Y57.649 E0.01745 ; perimeter
G1 X61.054 Y57.514 E0.01809 ; perimeter
G1 X61.494 Y57.441 E0.01836 ; perimeter
G1 X61.970 Y57.429 E0.01963 ; perimeter
G1 X62.232 Y57.448 E0.01079 ; perimeter
G1 X62.712 Y57.534 E0.02010 ; perimeter
G1 X63.189 Y57.679 E0.02055 ; perimeter
G1 X63.657 Y57.885 E0.02107 ; perimeter
G1 X64.105 Y58.147 E0.02136 ; perimeter
G1 X64.532 Y58.466 E0.02197 ; perimeter
G1 X82.078 Y73.189 E0.94358 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X92.645 Y77.746 E0.29203 ; perimeter
G1 X91.830 Y78.717 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X91.502 Y78.488 F10800.000 ; move inwards before travel
G1 F8640
G1 X89.290 Y76.624 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.722 Y87.484 E0.10040 ; perimeter
G1 X77.066 Y87.074 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.10040 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X83.742 Y79.117 E0.10040 ; perimeter
G1 X84.086 Y78.707 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.10040 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X76.163 Y87.533 E0.10040 ; perimeter
G1 X77.017 Y86.516 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.10040 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
M73 Q74 S35
G1 X83.184 Y79.166 E0.10040 ; perimeter
G1 X84.037 Y78.149 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.10040 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X98.987 Y76.219 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y75.969 E0.04806 ; perimeter
G1 X97.847 Y75.455 E0.02116 ; perimeter
G1 X98.987 Y75.696 E0.04798 ; perimeter
G1 X98.987 Y76.159 E0.01905 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y76.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.451 Y76.288 E0.08142 ; perimeter
G1 X97.451 Y75.021 E0.05220 ; perimeter
G1 X97.708 Y75.021 E0.01057 ; perimeter
G1 X99.383 Y75.375 E0.07055 ; perimeter
G1 X99.383 Y76.643 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y77.183 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.988 Y77.030 E0.03321 ; perimeter
G1 X97.055 Y76.607 E0.08153 ; perimeter
G1 X97.055 Y74.624 E0.08166 ; perimeter
G1 X97.749 Y74.624 E0.02861 ; perimeter
G1 X99.780 Y75.053 E0.08550 ; perimeter
G1 X99.780 Y77.123 E0.08525 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.415 Y77.017 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.988 Y77.030 E-0.18405 ; wipe and retract
G1 X97.055 Y76.607 E-0.45698 ; wipe and retract
G1 X97.055 Y76.091 E-0.11896 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X151.013 Y76.219 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y75.696 E0.02153 ; perimeter
G1 X152.153 Y75.455 E0.04798 ; perimeter
G1 X152.153 Y75.969 E0.02116 ; perimeter
G1 X151.072 Y76.206 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y76.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.617 Y75.375 E0.05471 ; perimeter
G1 X152.292 Y75.021 E0.07055 ; perimeter
G1 X152.549 Y75.021 E0.01057 ; perimeter
G1 X152.549 Y76.288 E0.05220 ; perimeter
G1 X150.676 Y76.691 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y77.183 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.220 Y75.053 E0.08772 ; perimeter
G1 X152.251 Y74.624 E0.08550 ; perimeter
G1 X152.945 Y74.624 E0.02861 ; perimeter
G1 X152.945 Y76.607 E0.08166 ; perimeter
G1 X151.012 Y77.030 E0.08153 ; perimeter
G1 X150.279 Y77.171 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.396 Y76.823 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.220 Y75.053 E-0.48926 ; wipe and retract
G1 X151.368 Y74.811 E-0.27074 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X165.914 Y78.707 E0.10040 ; perimeter
G1 X166.258 Y79.117 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.10040 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X172.934 Y87.074 E0.10040 ; perimeter
G1 X173.278 Y87.484 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.10040 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X165.963 Y78.149 E0.10040 ; perimeter
G1 X166.816 Y79.166 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.10040 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X172.983 Y86.516 E0.10040 ; perimeter
G1 X173.837 Y87.533 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.10040 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X158.257 Y78.205 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X157.913 Y77.795 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.26976 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X185.714 Y58.777 E0.94906 ; perimeter
G1 X186.116 Y58.477 E0.02065 ; perimeter
G1 X186.522 Y58.240 E0.01938 ; perimeter
G1 X186.949 Y58.052 E0.01923 ; perimeter
G1 X187.381 Y57.920 E0.01859 ; perimeter
G1 X187.810 Y57.844 E0.01794 ; perimeter
G1 X188.237 Y57.823 E0.01763 ; perimeter
G1 X188.456 Y57.835 E0.00902 ; perimeter
G1 X188.863 Y57.903 E0.01700 ; perimeter
G1 X189.208 Y58.014 E0.01493 ; perimeter
G1 X189.535 Y58.179 E0.01512 ; perimeter
G1 X189.799 Y58.370 E0.01338 ; perimeter
G1 X189.240 Y58.838 E0.03002 ; perimeter
G1 X189.026 Y58.705 E0.01039 ; perimeter
G1 X188.609 Y58.550 E0.01834 ; perimeter
G1 X188.167 Y58.476 E0.01847 ; perimeter
G1 X187.714 Y58.482 E0.01864 ; perimeter
G1 X187.264 Y58.562 E0.01884 ; perimeter
G1 X186.827 Y58.714 E0.01903 ; perimeter
G1 X186.417 Y58.928 E0.01909 ; perimeter
G1 X186.109 Y59.148 E0.01558 ; perimeter
G1 X168.261 Y74.121 E0.95972 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X158.303 Y78.166 E0.25926 ; perimeter
M204 S1000 ; adjust acceleration
G1 X158.208 Y78.763 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X157.355 Y77.746 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.29203 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X185.468 Y58.466 E0.94358 ; perimeter
G1 X185.895 Y58.147 E0.02197 ; perimeter
G1 X186.343 Y57.885 E0.02136 ; perimeter
G1 X186.811 Y57.679 E0.02107 ; perimeter
G1 X187.288 Y57.534 E0.02055 ; perimeter
G1 X187.765 Y57.449 E0.01997 ; perimeter
G1 X188.238 Y57.426 E0.01950 ; perimeter
G1 X188.499 Y57.440 E0.01077 ; perimeter
G1 X188.951 Y57.516 E0.01888 ; perimeter
G1 X189.114 Y57.563 E0.00698 ; perimeter
G1 X189.362 Y57.648 E0.01080 ; perimeter
G1 X189.742 Y57.840 E0.01754 ; perimeter
G1 X190.078 Y58.083 E0.01707 ; perimeter
G1 X190.385 Y58.395 E0.01806 ; perimeter
G1 X189.253 Y59.345 E0.06089 ; perimeter
G1 X189.158 Y59.254 E0.00544 ; perimeter
G1 X188.851 Y59.063 E0.01489 ; perimeter
G1 X188.506 Y58.935 E0.01513 ; perimeter
G1 X188.136 Y58.873 E0.01546 ; perimeter
G1 X187.752 Y58.878 E0.01584 ; perimeter
G1 X187.364 Y58.947 E0.01621 ; perimeter
G1 X186.985 Y59.078 E0.01654 ; perimeter
G1 X186.625 Y59.267 E0.01674 ; perimeter
G1 X186.352 Y59.462 E0.01382 ; perimeter
G1 X168.405 Y74.517 E0.96502 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X158.254 Y78.725 E0.26965 ; perimeter
M204 S1000 ; adjust acceleration
G1 X158.179 Y78.364 F10800.000 ; move inwards before travel
G1 F8640
G1 X157.355 Y77.746 E-0.30695 ; wipe and retract
G1 X158.858 Y76.485 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X194.281 Y69.861 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X193.937 Y69.451 E0.02205 ; perimeter
G1 X196.485 Y67.313 E0.13703 ; perimeter
G1 X193.074 Y63.247 E0.21861 ; perimeter
G1 X190.526 Y65.386 E0.13703 ; perimeter
G1 X190.182 Y64.975 E0.02205 ; perimeter
G1 X192.730 Y62.837 E0.13703 ; perimeter
G1 X190.281 Y59.919 E0.15696 ; perimeter
G1 X190.789 Y59.493 E0.02730 ; perimeter
G1 X199.786 Y70.215 E0.57663 ; perimeter
G1 X199.278 Y70.641 E0.02729 ; perimeter
G1 X196.829 Y67.723 E0.15696 ; perimeter
G1 X194.327 Y69.822 E0.13456 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.232 Y70.419 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X193.379 Y69.402 E0.05471 ; perimeter
G1 X195.927 Y67.264 E0.13703 ; perimeter
G1 X193.025 Y63.806 E0.18596 ; perimeter
G1 X190.477 Y65.944 E0.13703 ; perimeter
G1 X189.624 Y64.927 E0.05471 ; perimeter
G1 X192.172 Y62.788 E0.13703 ; perimeter
G1 X189.723 Y59.870 E0.15696 ; perimeter
G1 X190.838 Y58.934 E0.05995 ; perimeter
G1 X200.344 Y70.264 E0.60929 ; perimeter
G1 X199.230 Y71.200 E0.05995 ; perimeter
G1 X196.781 Y68.281 E0.15696 ; perimeter
G1 X194.278 Y70.381 E0.13456 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.276 Y70.022 F10800.000 ; move inwards before travel
G1 F8640
G1 X193.379 Y69.402 E-0.30695 ; wipe and retract
G1 X194.882 Y68.141 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X152.467 Y100.738 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X152.467 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E0.80094 ; perimeter
G1 X200.405 Y76.292 E1.53241 ; perimeter
G1 X200.724 Y75.982 E0.01834 ; perimeter
G1 X201.008 Y75.614 E0.01917 ; perimeter
G1 X201.233 Y75.210 E0.01903 ; perimeter
G1 X201.391 Y74.781 E0.01884 ; perimeter
G1 X201.474 Y74.336 E0.01864 ; perimeter
G1 X201.479 Y73.888 E0.01847 ; perimeter
G1 X201.399 Y73.450 E0.01834 ; perimeter
G1 X201.234 Y73.041 E0.01817 ; perimeter
G1 X201.031 Y72.733 E0.01518 ; perimeter
G1 X200.240 Y71.788 E0.05077 ; perimeter
G1 X200.748 Y71.362 E0.02733 ; perimeter
G1 X201.638 Y72.423 E0.05706 ; perimeter
G1 X201.852 Y72.725 E0.01523 ; perimeter
G1 X202.005 Y73.040 E0.01442 ; perimeter
G1 X202.110 Y73.391 E0.01512 ; perimeter
G1 X202.160 Y73.750 E0.01493 ; perimeter
G1 X202.157 Y74.163 E0.01700 ; perimeter
G1 X202.130 Y74.380 E0.00902 ; perimeter
G1 X202.036 Y74.797 E0.01763 ; perimeter
G1 X201.886 Y75.207 E0.01794 ; perimeter
G1 X201.680 Y75.612 E0.01875 ; perimeter
G1 X201.426 Y75.992 E0.01883 ; perimeter
G1 X201.116 Y76.357 E0.01972 ; perimeter
G1 X200.753 Y76.699 E0.02056 ; perimeter
G1 X172.104 Y100.738 E1.54064 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X152.527 Y100.738 E0.52821 ; perimeter
M204 S1000 ; adjust acceleration
G1 X152.071 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X152.070 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E0.81133 ; perimeter
G1 X200.139 Y75.998 E1.52588 ; perimeter
G1 X200.428 Y75.718 E0.01657 ; perimeter
G1 X200.676 Y75.395 E0.01678 ; perimeter
G1 X200.872 Y75.044 E0.01654 ; perimeter
G1 X201.007 Y74.675 E0.01621 ; perimeter
G1 X201.078 Y74.297 E0.01584 ; perimeter
G1 X201.082 Y73.922 E0.01546 ; perimeter
G1 X201.016 Y73.560 E0.01513 ; perimeter
G1 X200.881 Y73.226 E0.01486 ; perimeter
G1 X200.713 Y72.971 E0.01260 ; perimeter
G1 X199.682 Y71.739 E0.06616 ; perimeter
G1 X200.797 Y70.803 E0.05996 ; perimeter
G1 X201.952 Y72.181 E0.07406 ; perimeter
G1 X202.194 Y72.522 E0.01725 ; perimeter
G1 X202.375 Y72.895 E0.01707 ; perimeter
G1 X202.498 Y73.303 E0.01754 ; perimeter
G1 X202.557 Y73.730 E0.01777 ; perimeter
G1 X202.553 Y74.189 E0.01888 ; perimeter
G1 X202.521 Y74.448 E0.01076 ; perimeter
G1 X202.417 Y74.910 E0.01950 ; perimeter
G1 X202.250 Y75.365 E0.01997 ; perimeter
G1 X202.023 Y75.811 E0.02060 ; perimeter
G1 X201.741 Y76.233 E0.02092 ; perimeter
G1 X201.404 Y76.631 E0.02148 ; perimeter
G1 X201.016 Y76.995 E0.02194 ; perimeter
G1 X172.248 Y101.134 E1.54704 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X152.131 Y101.134 E0.52821 ; perimeter
M204 S1000 ; adjust acceleration
G1 X152.282 Y100.795 F10800.000 ; move inwards before travel
G1 F8640
G1 X152.070 Y99.806 E-0.30695 ; wipe and retract
G1 X154.032 Y99.806 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X166.843 Y100.714 ; move to first infill point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.061 Y101.496 E0.05566 ; infill
G1 X166.061 Y101.931 E0.02188 ; infill
G1 X166.312 Y101.931 E0.01260 ; infill
G1 X167.327 Y100.915 E0.07230 ; infill
G1 X168.012 Y100.915 E0.03448 ; infill
G1 X166.996 Y101.931 E0.07230 ; infill
G1 X167.681 Y101.931 E0.03448 ; infill
G1 X168.697 Y100.915 E0.07230 ; infill
G1 X169.382 Y100.915 E0.03448 ; infill
G1 X168.366 Y101.931 E0.07230 ; infill
G1 X169.051 Y101.931 E0.03448 ; infill
G1 X169.744 Y101.238 E0.04931 ; infill
G1 X169.744 Y101.923 E0.03448 ; infill
G1 X169.535 Y102.131 E0.01484 ; infill
G1 F8640
G1 X169.744 Y101.923 E-0.06809 ; wipe and retract
G1 X169.744 Y101.238 E-0.15815 ; wipe and retract
G1 X169.051 Y101.931 E-0.22616 ; wipe and retract
G1 X168.366 Y101.931 E-0.15815 ; wipe and retract
G1 X168.824 Y101.473 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X97.248 Y138.884 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.53069 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X48.962 Y114.845 E1.54064 ; perimeter
G1 X48.599 Y114.503 E0.02056 ; perimeter
G1 X48.292 Y114.141 E0.01956 ; perimeter
G1 X48.033 Y113.755 E0.01914 ; perimeter
G1 X47.828 Y113.353 E0.01859 ; perimeter
G1 X47.679 Y112.944 E0.01794 ; perimeter
G1 X47.585 Y112.526 E0.01763 ; perimeter
G1 X47.558 Y112.309 E0.00902 ; perimeter
G1 X47.555 Y111.905 E0.01664 ; perimeter
G1 X47.606 Y111.532 E0.01552 ; perimeter
G1 X47.710 Y111.186 E0.01488 ; perimeter
G1 X47.863 Y110.871 E0.01442 ; perimeter
G1 X48.077 Y110.569 E0.01523 ; perimeter
G1 X48.967 Y109.508 E0.05706 ; perimeter
G1 X49.474 Y109.934 E0.02729 ; perimeter
G1 X48.710 Y110.845 E0.04901 ; perimeter
G1 X48.481 Y111.185 E0.01685 ; perimeter
G1 X48.316 Y111.596 E0.01826 ; perimeter
G1 X48.236 Y112.034 E0.01834 ; perimeter
G1 X48.240 Y112.482 E0.01847 ; perimeter
G1 X48.324 Y112.927 E0.01864 ; perimeter
G1 X48.482 Y113.356 E0.01884 ; perimeter
G1 X48.706 Y113.760 E0.01903 ; perimeter
G1 X48.991 Y114.128 E0.01917 ; perimeter
G1 X49.310 Y114.438 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.53241 ; perimeter
G1 X97.248 Y138.349 E0.80094 ; perimeter
G1 X97.248 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X97.644 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.53068 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03671 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X48.699 Y115.141 E1.54704 ; perimeter
G1 X48.311 Y114.777 E0.02194 ; perimeter
G1 X47.975 Y114.380 E0.02142 ; perimeter
G1 X47.691 Y113.956 E0.02104 ; perimeter
G1 X47.464 Y113.511 E0.02055 ; perimeter
G1 X47.298 Y113.056 E0.01997 ; perimeter
G1 X47.194 Y112.594 E0.01950 ; perimeter
G1 X47.162 Y112.335 E0.01076 ; perimeter
G1 X47.158 Y111.879 E0.01875 ; perimeter
G1 X47.218 Y111.447 E0.01798 ; perimeter
G1 X47.340 Y111.041 E0.01745 ; perimeter
G1 X47.521 Y110.669 E0.01707 ; perimeter
G1 X47.762 Y110.327 E0.01725 ; perimeter
G1 X48.918 Y108.950 E0.07406 ; perimeter
G1 X50.033 Y109.885 E0.05995 ; perimeter
G1 X49.027 Y111.084 E0.06447 ; perimeter
G1 X48.834 Y111.371 E0.01426 ; perimeter
G1 X48.699 Y111.707 E0.01489 ; perimeter
G1 X48.633 Y112.068 E0.01513 ; perimeter
G1 X48.636 Y112.443 E0.01546 ; perimeter
G1 X48.708 Y112.821 E0.01584 ; perimeter
G1 X48.843 Y113.191 E0.01621 ; perimeter
G1 X49.038 Y113.541 E0.01654 ; perimeter
G1 X49.287 Y113.864 E0.01678 ; perimeter
G1 X49.576 Y114.144 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.52588 ; perimeter
G1 X97.644 Y137.952 E0.81133 ; perimeter
G1 X97.644 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X97.244 Y139.271 F10800.000 ; move inwards before travel
G1 F8640
G1 X94.353 Y139.236 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X83.445 Y140.278 ; move to first infill point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.654 Y140.069 E0.01484 ; infill
G1 X83.654 Y139.384 E0.03448 ; infill
G1 X82.961 Y140.077 E0.04931 ; infill
G1 X82.276 Y140.077 E0.03448 ; infill
G1 X83.292 Y139.061 E0.07230 ; infill
G1 X82.607 Y139.061 E0.03448 ; infill
G1 X81.591 Y140.077 E0.07230 ; infill
G1 X80.906 Y140.077 E0.03448 ; infill
G1 X81.922 Y139.061 E0.07230 ; infill
G1 X81.237 Y139.061 E0.03448 ; infill
G1 X80.221 Y140.077 E0.07230 ; infill
G1 X79.971 Y140.077 E0.01260 ; infill
G1 X79.971 Y139.642 E0.02188 ; infill
G1 X80.753 Y138.860 E0.05566 ; infill
G1 F8640
G1 X79.971 Y139.642 E-0.25530 ; wipe and retract
G1 X79.971 Y140.077 E-0.10036 ; wipe and retract
G1 X80.221 Y140.077 E-0.05779 ; wipe and retract
G1 X81.237 Y139.061 E-0.33164 ; wipe and retract
G1 X81.301 Y139.061 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X55.434 Y108.007 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X52.885 Y105.869 E0.13703 ; perimeter
G1 X50.436 Y108.787 E0.15696 ; perimeter
G1 X49.929 Y108.361 E0.02729 ; perimeter
G1 X58.926 Y97.639 E0.57663 ; perimeter
G1 X59.434 Y98.065 E0.02729 ; perimeter
G1 X56.985 Y100.983 E0.15696 ; perimeter
G1 X59.533 Y103.122 E0.13703 ; perimeter
G1 X59.189 Y103.532 E0.02205 ; perimeter
G1 X56.641 Y101.393 E0.13703 ; perimeter
G1 X53.230 Y105.459 E0.21861 ; perimeter
G1 X55.778 Y107.597 E0.13703 ; perimeter
G1 X55.472 Y107.961 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.482 Y108.565 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X52.934 Y106.427 E0.13703 ; perimeter
G1 X50.485 Y109.346 E0.15696 ; perimeter
G1 X49.370 Y108.410 E0.05995 ; perimeter
G1 X58.877 Y97.081 E0.60929 ; perimeter
G1 X59.992 Y98.016 E0.05995 ; perimeter
G1 X57.543 Y100.935 E0.15696 ; perimeter
G1 X60.091 Y103.073 E0.13703 ; perimeter
G1 X59.238 Y104.090 E0.05471 ; perimeter
G1 X56.689 Y101.952 E0.13703 ; perimeter
G1 X53.788 Y105.410 E0.18596 ; perimeter
G1 X56.336 Y107.548 E0.13703 ; perimeter
G1 X55.521 Y108.519 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.211 Y108.272 F10800.000 ; move inwards before travel
G1 F8640
G1 X52.962 Y106.449 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X91.458 Y116.351 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.26174 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X63.660 Y97.337 E0.95688 ; perimeter
G1 X63.300 Y97.076 E0.01834 ; perimeter
G1 X62.887 Y96.860 E0.01917 ; perimeter
G1 X62.451 Y96.709 E0.01903 ; perimeter
G1 X62.001 Y96.628 E0.01884 ; perimeter
G1 X61.548 Y96.623 E0.01864 ; perimeter
G1 X61.106 Y96.696 E0.01847 ; perimeter
G1 X60.689 Y96.851 E0.01834 ; perimeter
G1 X60.475 Y96.984 E0.01039 ; perimeter
G1 X59.916 Y96.516 E0.03002 ; perimeter
G1 X60.179 Y96.326 E0.01338 ; perimeter
G1 X60.502 Y96.163 E0.01488 ; perimeter
G1 X60.868 Y96.045 E0.01582 ; perimeter
G1 X61.240 Y95.983 E0.01555 ; perimeter
G1 X61.675 Y95.972 E0.01794 ; perimeter
G1 X61.897 Y95.988 E0.00916 ; perimeter
G1 X62.334 Y96.066 E0.01828 ; perimeter
G1 X62.765 Y96.198 E0.01859 ; perimeter
G1 X63.193 Y96.386 E0.01923 ; perimeter
G1 X63.599 Y96.623 E0.01938 ; perimeter
G1 X64.000 Y96.923 E0.02065 ; perimeter
G1 X81.649 Y111.732 E0.94906 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X91.802 Y115.941 E0.26976 ; perimeter
G1 X91.496 Y116.305 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X91.507 Y116.909 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.27212 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X63.416 Y97.649 E0.96224 ; perimeter
G1 X63.091 Y97.413 E0.01657 ; perimeter
G1 X62.730 Y97.225 E0.01678 ; perimeter
G1 X62.350 Y97.093 E0.01654 ; perimeter
G1 X61.963 Y97.024 E0.01621 ; perimeter
G1 X61.579 Y97.019 E0.01584 ; perimeter
G1 X61.208 Y97.081 E0.01546 ; perimeter
G1 X60.864 Y97.209 E0.01513 ; perimeter
G1 X60.557 Y97.400 E0.01489 ; perimeter
G1 X60.462 Y97.491 E0.00544 ; perimeter
G1 X59.330 Y96.541 E0.06089 ; perimeter
G1 X59.637 Y96.229 E0.01806 ; perimeter
G1 X59.973 Y95.986 E0.01707 ; perimeter
G1 X60.351 Y95.795 E0.01745 ; perimeter
G1 X60.769 Y95.660 E0.01809 ; perimeter
G1 X61.209 Y95.587 E0.01836 ; perimeter
G1 X61.685 Y95.575 E0.01963 ; perimeter
G1 X61.946 Y95.595 E0.01079 ; perimeter
G1 X62.427 Y95.680 E0.02010 ; perimeter
G1 X62.904 Y95.826 E0.02055 ; perimeter
G1 X63.372 Y96.031 E0.02107 ; perimeter
G1 X63.819 Y96.293 E0.02136 ; perimeter
G1 X64.247 Y96.612 E0.02197 ; perimeter
G1 X81.793 Y111.335 E0.94358 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X92.360 Y115.892 E0.29203 ; perimeter
M73 P75 R33
G1 X91.545 Y116.863 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X91.217 Y116.634 F10800.000 ; move inwards before travel
G1 F8640
G1 X89.005 Y114.771 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X76.436 Y125.630 E0.10040 ; perimeter
G1 X76.780 Y125.220 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.10040 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X83.457 Y117.264 E0.10040 ; perimeter
G1 X83.801 Y116.854 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.10040 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.878 Y125.679 E0.10040 ; perimeter
G1 X76.732 Y124.662 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.10040 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X82.899 Y117.312 E0.10040 ; perimeter
G1 X83.752 Y116.295 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.10040 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X98.702 Y114.365 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y114.115 E0.04806 ; perimeter
G1 X97.562 Y113.601 E0.02116 ; perimeter
G1 X98.702 Y113.842 E0.04798 ; perimeter
G1 X98.702 Y114.305 E0.01905 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y114.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.166 Y114.434 E0.08142 ; perimeter
G1 X97.166 Y113.167 E0.05220 ; perimeter
G1 X97.422 Y113.167 E0.01057 ; perimeter
G1 X99.098 Y113.521 E0.07055 ; perimeter
G1 X99.098 Y114.789 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y115.329 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.703 Y115.176 E0.03321 ; perimeter
G1 X96.769 Y114.753 E0.08153 ; perimeter
G1 X96.769 Y112.771 E0.08166 ; perimeter
G1 X97.464 Y112.771 E0.02861 ; perimeter
G1 X99.494 Y113.199 E0.08550 ; perimeter
G1 X99.494 Y115.269 E0.08525 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.130 Y115.163 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.703 Y115.176 E-0.18405 ; wipe and retract
G1 X96.769 Y114.753 E-0.45698 ; wipe and retract
G1 X96.769 Y114.238 E-0.11896 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X150.728 Y114.365 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y113.842 E0.02153 ; perimeter
G1 X151.868 Y113.601 E0.04798 ; perimeter
G1 X151.868 Y114.115 E0.02116 ; perimeter
G1 X150.787 Y114.352 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y114.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.332 Y113.521 E0.05471 ; perimeter
G1 X152.007 Y113.167 E0.07055 ; perimeter
G1 X152.264 Y113.167 E0.01057 ; perimeter
G1 X152.264 Y114.434 E0.05220 ; perimeter
G1 X150.390 Y114.837 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y115.329 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.935 Y113.199 E0.08772 ; perimeter
G1 X151.966 Y112.771 E0.08550 ; perimeter
G1 X152.660 Y112.771 E0.02861 ; perimeter
G1 X152.660 Y114.753 E0.08166 ; perimeter
G1 X150.727 Y115.176 E0.08153 ; perimeter
G1 X149.994 Y115.317 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.111 Y114.969 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.935 Y113.199 E-0.48926 ; wipe and retract
G1 X151.082 Y112.957 E-0.27074 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X165.629 Y116.854 E0.10040 ; perimeter
G1 X165.973 Y117.264 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.10040 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X172.649 Y125.220 E0.10040 ; perimeter
G1 X172.993 Y125.630 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.10040 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X165.677 Y116.295 E0.10040 ; perimeter
G1 X166.531 Y117.312 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.10040 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X172.698 Y124.662 E0.10040 ; perimeter
G1 X173.552 Y125.679 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.10040 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X157.972 Y116.351 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X157.628 Y115.941 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.26976 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X185.429 Y96.923 E0.94906 ; perimeter
G1 X185.831 Y96.623 E0.02065 ; perimeter
G1 X186.237 Y96.386 E0.01938 ; perimeter
G1 X186.664 Y96.198 E0.01923 ; perimeter
G1 X187.096 Y96.066 E0.01859 ; perimeter
G1 X187.524 Y95.990 E0.01794 ; perimeter
G1 X187.952 Y95.969 E0.01763 ; perimeter
G1 X188.171 Y95.981 E0.00902 ; perimeter
G1 X188.578 Y96.049 E0.01700 ; perimeter
G1 X188.922 Y96.161 E0.01493 ; perimeter
G1 X189.250 Y96.326 E0.01512 ; perimeter
G1 X189.513 Y96.516 E0.01338 ; perimeter
G1 X188.955 Y96.984 E0.03002 ; perimeter
G1 X188.741 Y96.851 E0.01039 ; perimeter
G1 X188.324 Y96.696 E0.01834 ; perimeter
G1 X187.882 Y96.623 E0.01847 ; perimeter
G1 X187.429 Y96.628 E0.01864 ; perimeter
G1 X186.979 Y96.709 E0.01884 ; perimeter
G1 X186.542 Y96.860 E0.01903 ; perimeter
G1 X186.132 Y97.075 E0.01909 ; perimeter
G1 X185.824 Y97.294 E0.01558 ; perimeter
G1 X167.976 Y112.267 E0.95972 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X158.018 Y116.312 E0.25926 ; perimeter
M204 S1000 ; adjust acceleration
G1 X157.923 Y116.909 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X157.069 Y115.892 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.29203 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X185.183 Y96.612 E0.94358 ; perimeter
G1 X185.610 Y96.293 E0.02197 ; perimeter
G1 X186.058 Y96.031 E0.02136 ; perimeter
G1 X186.526 Y95.826 E0.02107 ; perimeter
G1 X187.003 Y95.680 E0.02055 ; perimeter
G1 X187.480 Y95.595 E0.01997 ; perimeter
G1 X187.953 Y95.572 E0.01950 ; perimeter
G1 X188.214 Y95.586 E0.01077 ; perimeter
G1 X188.666 Y95.662 E0.01888 ; perimeter
G1 X188.829 Y95.709 E0.00698 ; perimeter
G1 X189.077 Y95.794 E0.01080 ; perimeter
G1 X189.457 Y95.986 E0.01754 ; perimeter
G1 X189.792 Y96.229 E0.01707 ; perimeter
G1 X190.100 Y96.541 E0.01806 ; perimeter
G1 X188.968 Y97.491 E0.06089 ; perimeter
G1 X188.873 Y97.400 E0.00544 ; perimeter
G1 X188.566 Y97.209 E0.01489 ; perimeter
G1 X188.221 Y97.081 E0.01513 ; perimeter
G1 X187.851 Y97.019 E0.01546 ; perimeter
G1 X187.467 Y97.024 E0.01584 ; perimeter
G1 X187.079 Y97.093 E0.01621 ; perimeter
G1 X186.700 Y97.225 E0.01654 ; perimeter
G1 X186.340 Y97.413 E0.01674 ; perimeter
G1 X186.067 Y97.608 E0.01382 ; perimeter
G1 X168.120 Y112.663 E0.96502 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X157.969 Y116.871 E0.26965 ; perimeter
M204 S1000 ; adjust acceleration
G1 X157.894 Y116.510 F10800.000 ; move inwards before travel
G1 F8640
G1 X157.069 Y115.892 E-0.30695 ; wipe and retract
G1 X158.572 Y114.631 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X193.996 Y108.007 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X193.652 Y107.597 E0.02205 ; perimeter
G1 X196.200 Y105.459 E0.13703 ; perimeter
G1 X192.789 Y101.393 E0.21861 ; perimeter
G1 X190.241 Y103.532 E0.13703 ; perimeter
G1 X189.897 Y103.122 E0.02205 ; perimeter
G1 X192.445 Y100.983 E0.13703 ; perimeter
G1 X189.996 Y98.065 E0.15696 ; perimeter
G1 X190.504 Y97.639 E0.02730 ; perimeter
G1 X199.501 Y108.361 E0.57663 ; perimeter
G1 X198.993 Y108.787 E0.02729 ; perimeter
G1 X196.544 Y105.869 E0.15696 ; perimeter
G1 X194.042 Y107.968 E0.13456 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.947 Y108.565 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X193.094 Y107.548 E0.05471 ; perimeter
G1 X195.642 Y105.410 E0.13703 ; perimeter
G1 X192.740 Y101.952 E0.18596 ; perimeter
G1 X190.192 Y104.090 E0.13703 ; perimeter
G1 X189.338 Y103.073 E0.05471 ; perimeter
G1 X191.887 Y100.935 E0.13703 ; perimeter
G1 X189.438 Y98.016 E0.15696 ; perimeter
G1 X190.552 Y97.081 E0.05995 ; perimeter
G1 X200.059 Y108.410 E0.60929 ; perimeter
G1 X198.944 Y109.346 E0.05995 ; perimeter
G1 X196.495 Y106.427 E0.15696 ; perimeter
G1 X193.993 Y108.527 E0.13456 ; perimeter
M204 S1000 ; adjust acceleration
G1 X193.991 Y108.168 F10800.000 ; move inwards before travel
G1 F8640
G1 X193.094 Y107.548 E-0.30695 ; wipe and retract
G1 X194.597 Y106.287 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X152.182 Y138.884 ; move to first perimeter point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X152.182 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E0.80094 ; perimeter
G1 X200.119 Y114.438 E1.53241 ; perimeter
G1 X200.439 Y114.128 E0.01834 ; perimeter
G1 X200.723 Y113.760 E0.01917 ; perimeter
G1 X200.948 Y113.356 E0.01903 ; perimeter
G1 X201.105 Y112.927 E0.01884 ; perimeter
G1 X201.189 Y112.482 E0.01864 ; perimeter
G1 X201.193 Y112.034 E0.01847 ; perimeter
G1 X201.113 Y111.596 E0.01834 ; perimeter
G1 X200.949 Y111.187 E0.01817 ; perimeter
G1 X200.746 Y110.880 E0.01518 ; perimeter
G1 X199.955 Y109.934 E0.05077 ; perimeter
G1 X200.463 Y109.508 E0.02733 ; perimeter
G1 X201.353 Y110.569 E0.05706 ; perimeter
G1 X201.567 Y110.871 E0.01523 ; perimeter
G1 X201.719 Y111.186 E0.01442 ; perimeter
G1 X201.825 Y111.537 E0.01512 ; perimeter
G1 X201.875 Y111.896 E0.01493 ; perimeter
G1 X201.871 Y112.309 E0.01700 ; perimeter
G1 X201.845 Y112.526 E0.00902 ; perimeter
G1 X201.750 Y112.944 E0.01763 ; perimeter
G1 X201.601 Y113.353 E0.01794 ; perimeter
G1 X201.394 Y113.758 E0.01875 ; perimeter
G1 X201.141 Y114.138 E0.01883 ; perimeter
G1 X200.831 Y114.503 E0.01972 ; perimeter
G1 X200.467 Y114.845 E0.02056 ; perimeter
G1 X171.819 Y138.884 E1.54064 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
M73 Q75 S34
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X152.242 Y138.884 E0.52821 ; perimeter
M204 S1000 ; adjust acceleration
G1 X151.785 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X151.785 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E0.81133 ; perimeter
G1 X199.854 Y114.144 E1.52588 ; perimeter
G1 X200.143 Y113.864 E0.01657 ; perimeter
G1 X200.391 Y113.541 E0.01678 ; perimeter
G1 X200.586 Y113.191 E0.01654 ; perimeter
G1 X200.722 Y112.821 E0.01621 ; perimeter
G1 X200.793 Y112.443 E0.01584 ; perimeter
G1 X200.797 Y112.068 E0.01546 ; perimeter
G1 X200.731 Y111.707 E0.01513 ; perimeter
G1 X200.596 Y111.372 E0.01486 ; perimeter
G1 X200.427 Y111.117 E0.01260 ; perimeter
G1 X199.397 Y109.885 E0.06616 ; perimeter
G1 X200.512 Y108.950 E0.05996 ; perimeter
G1 X201.667 Y110.327 E0.07406 ; perimeter
G1 X201.909 Y110.669 E0.01725 ; perimeter
G1 X202.090 Y111.041 E0.01707 ; perimeter
G1 X202.212 Y111.449 E0.01754 ; perimeter
G1 X202.272 Y111.876 E0.01777 ; perimeter
G1 X202.267 Y112.335 E0.01888 ; perimeter
G1 X202.236 Y112.594 E0.01076 ; perimeter
G1 X202.131 Y113.056 E0.01950 ; perimeter
G1 X201.965 Y113.511 E0.01997 ; perimeter
G1 X201.738 Y113.957 E0.02060 ; perimeter
G1 X201.456 Y114.379 E0.02092 ; perimeter
G1 X201.119 Y114.777 E0.02148 ; perimeter
G1 X200.731 Y115.141 E0.02194 ; perimeter
G1 X171.963 Y139.280 E1.54704 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X151.845 Y139.280 E0.52821 ; perimeter
M204 S1000 ; adjust acceleration
G1 X151.997 Y138.941 F10800.000 ; move inwards before travel
G1 F8640
G1 X151.785 Y137.952 E-0.30695 ; wipe and retract
G1 X153.747 Y137.952 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
G1 X166.558 Y138.860 ; move to first infill point
G1 Z16.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.776 Y139.642 E0.05566 ; infill
G1 X165.776 Y140.077 E0.02188 ; infill
G1 X166.026 Y140.077 E0.01260 ; infill
G1 X167.042 Y139.061 E0.07230 ; infill
G1 X167.727 Y139.061 E0.03448 ; infill
G1 X166.711 Y140.077 E0.07230 ; infill
G1 X167.396 Y140.077 E0.03448 ; infill
G1 X168.412 Y139.061 E0.07230 ; infill
G1 X169.097 Y139.061 E0.03448 ; infill
G1 X168.081 Y140.077 E0.07230 ; infill
G1 X168.766 Y140.077 E0.03448 ; infill
G1 X169.459 Y139.384 E0.04931 ; infill
G1 X169.459 Y140.069 E0.03448 ; infill
G1 X169.250 Y140.278 E0.01484 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;16.75


G1 F8640
G1 X169.459 Y140.069 E-0.06809 ; wipe and retract
G1 X169.459 Y139.384 E-0.15815 ; wipe and retract
G1 X168.766 Y140.077 E-0.22616 ; wipe and retract
G1 X168.081 Y140.077 E-0.15815 ; wipe and retract
G1 X168.539 Y139.619 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;16.75
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X97.274 Y100.738 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.51999 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X49.113 Y76.586 E1.54786 ; perimeter
G1 X48.751 Y76.246 E0.02049 ; perimeter
G1 X48.444 Y75.885 E0.01951 ; perimeter
G1 X48.187 Y75.500 E0.01909 ; perimeter
G1 X47.982 Y75.099 E0.01855 ; perimeter
G1 X47.832 Y74.691 E0.01790 ; perimeter
G1 X47.737 Y74.275 E0.01756 ; perimeter
G1 X47.709 Y74.044 E0.00960 ; perimeter
G1 X47.706 Y73.642 E0.01655 ; perimeter
G1 X47.758 Y73.270 E0.01547 ; perimeter
G1 X47.862 Y72.925 E0.01484 ; perimeter
G1 X48.015 Y72.611 E0.01438 ; perimeter
G1 X48.228 Y72.310 E0.01519 ; perimeter
G1 X49.118 Y71.249 E0.05706 ; perimeter
G1 X49.625 Y71.675 E0.02729 ; perimeter
G1 X48.861 Y72.587 E0.04901 ; perimeter
G1 X48.633 Y72.926 E0.01685 ; perimeter
G1 X48.467 Y73.337 E0.01826 ; perimeter
G1 X48.387 Y73.775 E0.01834 ; perimeter
G1 X48.391 Y74.223 E0.01847 ; perimeter
G1 X48.475 Y74.668 E0.01864 ; perimeter
G1 X48.633 Y75.098 E0.01884 ; perimeter
G1 X48.858 Y75.501 E0.01903 ; perimeter
G1 X49.142 Y75.870 E0.01917 ; perimeter
G1 X49.461 Y76.180 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.53962 ; perimeter
G1 X97.271 Y100.203 E0.79015 ; perimeter
G1 X97.273 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X97.672 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.52006 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03671 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X48.850 Y76.883 E1.55426 ; perimeter
G1 X48.463 Y76.519 E0.02187 ; perimeter
G1 X48.127 Y76.124 E0.02136 ; perimeter
G1 X47.844 Y75.701 E0.02098 ; perimeter
G1 X47.618 Y75.258 E0.02050 ; perimeter
G1 X47.451 Y74.804 E0.01993 ; perimeter
G1 X47.346 Y74.343 E0.01944 ; perimeter
G1 X47.313 Y74.069 E0.01138 ; perimeter
G1 X47.309 Y73.616 E0.01868 ; perimeter
G1 X47.370 Y73.185 E0.01793 ; perimeter
G1 X47.492 Y72.780 E0.01740 ; perimeter
G1 X47.672 Y72.409 E0.01702 ; perimeter
G1 X47.913 Y72.068 E0.01720 ; perimeter
G1 X49.069 Y70.691 E0.07406 ; perimeter
G1 X50.184 Y71.626 E0.05995 ; perimeter
G1 X49.178 Y72.825 E0.06447 ; perimeter
G1 X48.985 Y73.113 E0.01426 ; perimeter
G1 X48.850 Y73.448 E0.01489 ; perimeter
G1 X48.784 Y73.809 E0.01513 ; perimeter
G1 X48.787 Y74.185 E0.01546 ; perimeter
G1 X48.859 Y74.562 E0.01584 ; perimeter
G1 X48.994 Y74.932 E0.01621 ; perimeter
G1 X49.190 Y75.283 E0.01654 ; perimeter
G1 X49.438 Y75.605 E0.01678 ; perimeter
G1 X49.727 Y75.885 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.53309 ; perimeter
G1 X97.666 Y99.806 E0.80046 ; perimeter
G1 X97.671 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X97.272 Y101.125 F10800.000 ; move inwards before travel
G1 F8640
G1 X94.380 Y101.090 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X84.140 Y101.697 ; move to first infill point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.358 Y100.915 E0.05567 ; infill
G1 X82.673 Y100.915 E0.03448 ; infill
G1 X83.688 Y101.931 E0.07230 ; infill
G1 X83.003 Y101.931 E0.03448 ; infill
G1 X81.988 Y100.915 E0.07230 ; infill
G1 X81.303 Y100.915 E0.03448 ; infill
G1 X82.318 Y101.931 E0.07230 ; infill
G1 X81.634 Y101.931 E0.03448 ; infill
G1 X80.618 Y100.915 E0.07230 ; infill
G1 X80.256 Y100.915 E0.01821 ; infill
G1 X80.256 Y101.238 E0.01627 ; infill
G1 X80.949 Y101.931 E0.04930 ; infill
G1 X80.264 Y101.931 E0.03448 ; infill
G1 X80.055 Y101.722 E0.01483 ; infill
G1 F8640
G1 X80.264 Y101.931 E-0.06804 ; wipe and retract
G1 X80.949 Y101.931 E-0.15815 ; wipe and retract
G1 X80.256 Y101.238 E-0.22612 ; wipe and retract
G1 X80.256 Y100.915 E-0.07462 ; wipe and retract
G1 X80.618 Y100.915 E-0.08353 ; wipe and retract
G1 X81.076 Y101.373 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X55.580 Y69.744 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X53.037 Y67.610 E0.13676 ; perimeter
G1 X50.587 Y70.529 E0.15696 ; perimeter
G1 X50.080 Y70.103 E0.02729 ; perimeter
G1 X59.077 Y59.380 E0.57663 ; perimeter
G1 X59.585 Y59.806 E0.02729 ; perimeter
G1 X57.136 Y62.725 E0.15696 ; perimeter
G1 X59.679 Y64.859 E0.13676 ; perimeter
G1 X59.335 Y65.269 E0.02205 ; perimeter
G1 X56.792 Y63.135 E0.13676 ; perimeter
G1 X53.381 Y67.200 E0.21861 ; perimeter
G1 X55.924 Y69.334 E0.13676 ; perimeter
G1 X55.618 Y69.698 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.629 Y70.302 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X53.085 Y68.168 E0.13676 ; perimeter
G1 X50.636 Y71.087 E0.15696 ; perimeter
G1 X49.522 Y70.152 E0.05995 ; perimeter
G1 X59.028 Y58.822 E0.60929 ; perimeter
G1 X60.143 Y59.757 E0.05995 ; perimeter
G1 X57.694 Y62.676 E0.15696 ; perimeter
G1 X60.237 Y64.810 E0.13676 ; perimeter
G1 X59.384 Y65.827 E0.05471 ; perimeter
G1 X56.841 Y63.693 E0.13676 ; perimeter
G1 X53.939 Y67.151 E0.18596 ; perimeter
G1 X56.482 Y69.285 E0.13676 ; perimeter
G1 X55.667 Y70.256 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.357 Y70.009 F10800.000 ; move inwards before travel
G1 F8640
G1 X53.108 Y68.187 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X91.551 Y78.044 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.25144 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X63.811 Y59.078 E0.96409 ; perimeter
G1 X63.451 Y58.817 E0.01834 ; perimeter
G1 X63.038 Y58.601 E0.01917 ; perimeter
G1 X62.602 Y58.450 E0.01903 ; perimeter
G1 X62.152 Y58.369 E0.01884 ; perimeter
G1 X61.699 Y58.364 E0.01864 ; perimeter
G1 X61.257 Y58.438 E0.01847 ; perimeter
G1 X60.840 Y58.593 E0.01834 ; perimeter
G1 X60.626 Y58.726 E0.01039 ; perimeter
G1 X60.067 Y58.257 E0.03002 ; perimeter
G1 X60.329 Y58.068 E0.01330 ; perimeter
G1 X60.650 Y57.906 E0.01484 ; perimeter
G1 X61.014 Y57.788 E0.01575 ; perimeter
G1 X61.385 Y57.725 E0.01550 ; perimeter
G1 X61.818 Y57.713 E0.01787 ; perimeter
G1 X62.055 Y57.730 E0.00976 ; perimeter
G1 X62.490 Y57.808 E0.01822 ; perimeter
G1 X62.920 Y57.940 E0.01855 ; perimeter
G1 X63.346 Y58.128 E0.01919 ; perimeter
G1 X63.751 Y58.365 E0.01932 ; perimeter
G1 X64.152 Y58.664 E0.02059 ; perimeter
G1 X81.934 Y73.586 E0.95628 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X91.896 Y77.634 E0.25946 ; perimeter
G1 X91.590 Y77.998 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X91.600 Y78.602 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.26182 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X63.567 Y59.391 E0.96945 ; perimeter
G1 X63.242 Y59.155 E0.01657 ; perimeter
G1 X62.881 Y58.966 E0.01678 ; perimeter
G1 X62.502 Y58.835 E0.01654 ; perimeter
G1 X62.114 Y58.765 E0.01621 ; perimeter
G1 X61.730 Y58.761 E0.01584 ; perimeter
G1 X61.359 Y58.822 E0.01546 ; perimeter
G1 X61.015 Y58.950 E0.01513 ; perimeter
G1 X60.708 Y59.141 E0.01489 ; perimeter
G1 X60.613 Y59.233 E0.00544 ; perimeter
G1 X59.481 Y58.283 E0.06089 ; perimeter
G1 X59.787 Y57.971 E0.01801 ; perimeter
G1 X60.122 Y57.728 E0.01702 ; perimeter
G1 X60.499 Y57.538 E0.01740 ; perimeter
G1 X60.915 Y57.403 E0.01803 ; perimeter
G1 X61.353 Y57.329 E0.01830 ; perimeter
G1 X61.828 Y57.316 E0.01956 ; perimeter
G1 X62.104 Y57.337 E0.01143 ; perimeter
G1 X62.583 Y57.422 E0.02004 ; perimeter
G1 X63.059 Y57.568 E0.02050 ; perimeter
G1 X63.526 Y57.774 E0.02102 ; perimeter
G1 X63.972 Y58.035 E0.02129 ; perimeter
G1 X64.398 Y58.354 E0.02191 ; perimeter
G1 X82.078 Y73.189 E0.95079 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X92.454 Y77.585 E0.28173 ; perimeter
G1 X91.639 Y78.556 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X91.311 Y78.326 F10800.000 ; move inwards before travel
G1 F8640
G1 X89.098 Y76.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.784 Y87.536 E0.09706 ; perimeter
G1 X77.128 Y87.126 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.09706 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X83.804 Y79.170 E0.09706 ; perimeter
G1 X84.148 Y78.760 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.09706 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X76.225 Y87.585 E0.09706 ; perimeter
G1 X77.079 Y86.568 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.09706 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X83.246 Y79.219 E0.09706 ; perimeter
G1 X84.100 Y78.201 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.09706 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X98.987 Y76.219 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y75.969 E0.04806 ; perimeter
G1 X97.847 Y75.456 E0.02112 ; perimeter
G1 X98.987 Y75.701 E0.04802 ; perimeter
G1 X98.987 Y76.159 E0.01883 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y76.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.451 Y76.288 E0.08142 ; perimeter
G1 X97.451 Y74.958 E0.05478 ; perimeter
G1 X99.383 Y75.378 E0.08146 ; perimeter
G1 X99.383 Y76.643 E0.05211 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y77.183 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.988 Y77.030 E0.03321 ; perimeter
G1 X97.055 Y76.607 E0.08153 ; perimeter
G1 X97.055 Y74.460 E0.08844 ; perimeter
G1 X98.485 Y74.790 E0.06046 ; perimeter
G1 X99.780 Y75.054 E0.05445 ; perimeter
G1 X99.780 Y77.123 E0.08520 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.426 Y76.996 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.988 Y77.030 E-0.18405 ; wipe and retract
G1 X97.055 Y76.607 E-0.45698 ; wipe and retract
G1 X97.055 Y76.091 E-0.11896 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X151.013 Y76.220 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y75.701 E0.02135 ; perimeter
G1 X152.153 Y75.456 E0.04802 ; perimeter
G1 X152.153 Y75.969 E0.02114 ; perimeter
G1 X151.072 Y76.207 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y76.701 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.617 Y75.378 E0.05452 ; perimeter
G1 X152.549 Y74.958 E0.08146 ; perimeter
G1 X152.549 Y76.288 E0.05480 ; perimeter
G1 X150.676 Y76.690 E0.07893 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y77.182 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.220 Y75.054 E0.08765 ; perimeter
G1 X151.515 Y74.790 E0.05445 ; perimeter
G1 X152.945 Y74.460 E0.06046 ; perimeter
G1 X152.945 Y76.607 E0.08845 ; perimeter
G1 X151.136 Y77.004 E0.07630 ; perimeter
G1 X150.279 Y77.171 E0.03597 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.396 Y76.823 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.220 Y75.054 E-0.48884 ; wipe and retract
G1 X151.371 Y74.819 E-0.27116 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X165.852 Y78.760 E0.09706 ; perimeter
G1 X166.196 Y79.170 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.09706 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X172.872 Y87.126 E0.09706 ; perimeter
G1 X173.216 Y87.536 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.09706 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X165.900 Y78.201 E0.09706 ; perimeter
G1 X166.754 Y79.219 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.09706 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X172.921 Y86.568 E0.09706 ; perimeter
G1 X173.775 Y87.585 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.09706 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X158.449 Y78.044 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X158.104 Y77.634 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.25946 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X185.848 Y58.664 E0.95628 ; perimeter
G1 X186.249 Y58.365 E0.02059 ; perimeter
G1 X186.654 Y58.128 E0.01932 ; perimeter
G1 X187.080 Y57.940 E0.01919 ; perimeter
G1 X187.510 Y57.808 E0.01855 ; perimeter
G1 X187.938 Y57.732 E0.01790 ; perimeter
G1 X188.364 Y57.710 E0.01756 ; perimeter
G1 X188.596 Y57.723 E0.00960 ; perimeter
G1 X189.002 Y57.791 E0.01693 ; perimeter
G1 X189.345 Y57.903 E0.01488 ; perimeter
G1 X189.671 Y58.068 E0.01506 ; perimeter
G1 X189.933 Y58.257 E0.01330 ; perimeter
G1 X189.374 Y58.726 E0.03002 ; perimeter
G1 X189.160 Y58.593 E0.01039 ; perimeter
G1 X188.743 Y58.438 E0.01834 ; perimeter
G1 X188.301 Y58.364 E0.01847 ; perimeter
G1 X187.848 Y58.369 E0.01864 ; perimeter
G1 X187.398 Y58.450 E0.01884 ; perimeter
G1 X186.962 Y58.601 E0.01903 ; perimeter
G1 X186.551 Y58.816 E0.01909 ; perimeter
G1 X186.239 Y59.039 E0.01578 ; perimeter
G1 X168.261 Y74.121 E0.96673 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X158.495 Y78.006 E0.24896 ; perimeter
M204 S1000 ; adjust acceleration
G1 X158.400 Y78.602 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X157.546 Y77.585 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.28173 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X185.602 Y58.354 E0.95079 ; perimeter
G1 X186.028 Y58.035 E0.02191 ; perimeter
G1 X186.474 Y57.774 E0.02129 ; perimeter
G1 X186.941 Y57.568 E0.02102 ; perimeter
G1 X187.417 Y57.422 E0.02050 ; perimeter
G1 X187.893 Y57.337 E0.01993 ; perimeter
G1 X188.364 Y57.314 E0.01944 ; perimeter
G1 X188.640 Y57.328 E0.01138 ; perimeter
G1 X189.090 Y57.404 E0.01882 ; perimeter
G1 X189.238 Y57.447 E0.00634 ; perimeter
G1 X189.499 Y57.537 E0.01138 ; perimeter
G1 X189.878 Y57.728 E0.01748 ; perimeter
G1 X190.213 Y57.971 E0.01702 ; perimeter
G1 X190.519 Y58.283 E0.01801 ; perimeter
G1 X189.387 Y59.233 E0.06089 ; perimeter
G1 X189.292 Y59.141 E0.00544 ; perimeter
G1 X188.985 Y58.950 E0.01489 ; perimeter
G1 X188.641 Y58.822 E0.01513 ; perimeter
G1 X188.270 Y58.761 E0.01546 ; perimeter
G1 X187.886 Y58.765 E0.01584 ; perimeter
G1 X187.498 Y58.835 E0.01621 ; perimeter
G1 X187.119 Y58.966 E0.01654 ; perimeter
G1 X186.759 Y59.154 E0.01675 ; perimeter
G1 X186.482 Y59.352 E0.01401 ; perimeter
G1 X168.405 Y74.517 E0.97204 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X158.446 Y78.564 E0.25935 ; perimeter
M204 S1000 ; adjust acceleration
G1 X158.371 Y78.203 F10800.000 ; move inwards before travel
G1 F8640
G1 X157.546 Y77.585 E-0.30695 ; wipe and retract
G1 X159.049 Y76.324 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X194.420 Y69.744 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X194.076 Y69.334 E0.02205 ; perimeter
G1 X196.619 Y67.200 E0.13676 ; perimeter
G1 X193.208 Y63.135 E0.21861 ; perimeter
G1 X190.665 Y65.269 E0.13676 ; perimeter
G1 X190.321 Y64.859 E0.02205 ; perimeter
G1 X192.864 Y62.725 E0.13676 ; perimeter
G1 X190.415 Y59.806 E0.15696 ; perimeter
G1 X190.923 Y59.380 E0.02729 ; perimeter
G1 X199.920 Y70.103 E0.57663 ; perimeter
G1 X199.413 Y70.529 E0.02729 ; perimeter
G1 X196.964 Y67.610 E0.15696 ; perimeter
G1 X194.466 Y69.705 E0.13429 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.371 Y70.302 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X193.518 Y69.285 E0.05471 ; perimeter
G1 X196.061 Y67.151 E0.13676 ; perimeter
G1 X193.159 Y63.693 E0.18596 ; perimeter
G1 X190.616 Y65.827 E0.13676 ; perimeter
G1 X189.763 Y64.810 E0.05471 ; perimeter
G1 X192.306 Y62.676 E0.13676 ; perimeter
G1 X189.857 Y59.757 E0.15696 ; perimeter
G1 X190.972 Y58.822 E0.05995 ; perimeter
G1 X200.478 Y70.152 E0.60929 ; perimeter
G1 X199.364 Y71.087 E0.05995 ; perimeter
G1 X196.915 Y68.168 E0.15696 ; perimeter
G1 X194.417 Y70.264 E0.13429 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.415 Y69.905 F10800.000 ; move inwards before travel
G1 F8640
G1 X193.518 Y69.285 E-0.30695 ; wipe and retract
G1 X195.021 Y68.024 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X152.726 Y100.738 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X152.729 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E0.79014 ; perimeter
M73 P76 R32
G1 X200.539 Y76.180 E1.53962 ; perimeter
G1 X200.858 Y75.870 E0.01834 ; perimeter
G1 X201.142 Y75.501 E0.01917 ; perimeter
G1 X201.367 Y75.098 E0.01903 ; perimeter
G1 X201.525 Y74.668 E0.01884 ; perimeter
G1 X201.609 Y74.223 E0.01864 ; perimeter
G1 X201.613 Y73.775 E0.01847 ; perimeter
G1 X201.533 Y73.337 E0.01834 ; perimeter
G1 X201.368 Y72.928 E0.01817 ; perimeter
G1 X201.163 Y72.618 E0.01532 ; perimeter
G1 X200.374 Y71.676 E0.05062 ; perimeter
G1 X200.882 Y71.249 E0.02733 ; perimeter
G1 X201.772 Y72.310 E0.05706 ; perimeter
G1 X201.985 Y72.611 E0.01519 ; perimeter
G1 X202.138 Y72.925 E0.01438 ; perimeter
G1 X202.244 Y73.275 E0.01506 ; perimeter
G1 X202.294 Y73.633 E0.01488 ; perimeter
G1 X202.291 Y74.044 E0.01693 ; perimeter
G1 X202.263 Y74.275 E0.00960 ; perimeter
G1 X202.168 Y74.691 E0.01756 ; perimeter
G1 X202.018 Y75.099 E0.01790 ; perimeter
G1 X201.812 Y75.503 E0.01872 ; perimeter
G1 X201.558 Y75.882 E0.01878 ; perimeter
G1 X201.249 Y76.246 E0.01966 ; perimeter
G1 X200.887 Y76.586 E0.02050 ; perimeter
G1 X172.104 Y100.738 E1.54786 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X152.786 Y100.738 E0.51752 ; perimeter
M204 S1000 ; adjust acceleration
G1 X152.328 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X152.334 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E0.80046 ; perimeter
G1 X200.273 Y75.885 E1.53309 ; perimeter
G1 X200.562 Y75.605 E0.01657 ; perimeter
G1 X200.810 Y75.283 E0.01678 ; perimeter
G1 X201.006 Y74.932 E0.01654 ; perimeter
G1 X201.141 Y74.562 E0.01621 ; perimeter
G1 X201.213 Y74.185 E0.01584 ; perimeter
G1 X201.216 Y73.809 E0.01546 ; perimeter
G1 X201.150 Y73.448 E0.01513 ; perimeter
G1 X201.016 Y73.113 E0.01486 ; perimeter
G1 X200.845 Y72.855 E0.01274 ; perimeter
G1 X199.816 Y71.627 E0.06602 ; perimeter
G1 X200.931 Y70.691 E0.05996 ; perimeter
G1 X202.087 Y72.068 E0.07406 ; perimeter
G1 X202.328 Y72.409 E0.01720 ; perimeter
G1 X202.508 Y72.780 E0.01702 ; perimeter
G1 X202.631 Y73.187 E0.01748 ; perimeter
G1 X202.691 Y73.612 E0.01771 ; perimeter
G1 X202.687 Y74.069 E0.01882 ; perimeter
G1 X202.654 Y74.343 E0.01138 ; perimeter
G1 X202.549 Y74.804 E0.01944 ; perimeter
G1 X202.382 Y75.258 E0.01993 ; perimeter
G1 X202.155 Y75.702 E0.02056 ; perimeter
G1 X201.873 Y76.123 E0.02087 ; perimeter
G1 X201.537 Y76.519 E0.02142 ; perimeter
G1 X201.150 Y76.883 E0.02187 ; perimeter
G1 X172.248 Y101.134 E1.55426 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X152.388 Y101.134 E0.51759 ; perimeter
M204 S1000 ; adjust acceleration
G1 X152.541 Y100.795 F10800.000 ; move inwards before travel
G1 F8640
G1 X152.334 Y99.806 E-0.30689 ; wipe and retract
G1 X154.297 Y99.806 E-0.45311 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X165.860 Y101.722 ; move to first infill point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.069 Y101.931 E0.01484 ; infill
G1 X166.754 Y101.931 E0.03448 ; infill
G1 X166.061 Y101.238 E0.04930 ; infill
G1 X166.061 Y100.915 E0.01627 ; infill
G1 X166.423 Y100.915 E0.01821 ; infill
G1 X167.439 Y101.931 E0.07230 ; infill
G1 X168.124 Y101.931 E0.03448 ; infill
G1 X167.108 Y100.915 E0.07230 ; infill
G1 X167.793 Y100.915 E0.03448 ; infill
G1 X168.808 Y101.931 E0.07230 ; infill
G1 X169.493 Y101.931 E0.03448 ; infill
G1 X168.478 Y100.915 E0.07230 ; infill
G1 X169.163 Y100.915 E0.03448 ; infill
G1 X169.945 Y101.697 E0.05567 ; infill
G1 F8640
G1 X169.163 Y100.915 E-0.25535 ; wipe and retract
G1 X168.478 Y100.915 E-0.15815 ; wipe and retract
G1 X169.493 Y101.931 E-0.33164 ; wipe and retract
G1 X169.429 Y101.931 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X96.988 Y138.884 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.51999 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X48.828 Y114.732 E1.54786 ; perimeter
G1 X48.466 Y114.392 E0.02049 ; perimeter
G1 X48.159 Y114.031 E0.01951 ; perimeter
G1 X47.901 Y113.646 E0.01909 ; perimeter
G1 X47.696 Y113.245 E0.01855 ; perimeter
G1 X47.547 Y112.837 E0.01790 ; perimeter
G1 X47.452 Y112.421 E0.01756 ; perimeter
G1 X47.424 Y112.190 E0.00960 ; perimeter
G1 X47.421 Y111.788 E0.01655 ; perimeter
G1 X47.473 Y111.416 E0.01547 ; perimeter
G1 X47.577 Y111.071 E0.01484 ; perimeter
G1 X47.729 Y110.758 E0.01438 ; perimeter
G1 X47.942 Y110.456 E0.01519 ; perimeter
G1 X48.833 Y109.395 E0.05706 ; perimeter
G1 X49.340 Y109.821 E0.02729 ; perimeter
G1 X48.575 Y110.733 E0.04901 ; perimeter
G1 X48.347 Y111.072 E0.01685 ; perimeter
G1 X48.182 Y111.483 E0.01826 ; perimeter
G1 X48.102 Y111.921 E0.01834 ; perimeter
G1 X48.106 Y112.370 E0.01847 ; perimeter
G1 X48.190 Y112.814 E0.01864 ; perimeter
G1 X48.348 Y113.244 E0.01884 ; perimeter
G1 X48.572 Y113.647 E0.01903 ; perimeter
G1 X48.857 Y114.016 E0.01917 ; perimeter
G1 X49.176 Y114.326 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.53962 ; perimeter
G1 X96.986 Y138.349 E0.79015 ; perimeter
G1 X96.988 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X97.386 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.52006 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03671 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X48.565 Y115.029 E1.55426 ; perimeter
G1 X48.178 Y114.665 E0.02187 ; perimeter
G1 X47.842 Y114.270 E0.02136 ; perimeter
G1 X47.559 Y113.847 E0.02098 ; perimeter
G1 X47.333 Y113.404 E0.02050 ; perimeter
G1 X47.166 Y112.950 E0.01993 ; perimeter
G1 X47.061 Y112.490 E0.01944 ; perimeter
G1 X47.028 Y112.215 E0.01138 ; perimeter
G1 X47.024 Y111.762 E0.01868 ; perimeter
G1 X47.085 Y111.331 E0.01793 ; perimeter
G1 X47.207 Y110.927 E0.01740 ; perimeter
G1 X47.387 Y110.555 E0.01702 ; perimeter
G1 X47.628 Y110.214 E0.01720 ; perimeter
G1 X48.784 Y108.837 E0.07406 ; perimeter
G1 X49.899 Y109.773 E0.05995 ; perimeter
G1 X48.893 Y110.971 E0.06447 ; perimeter
G1 X48.700 Y111.259 E0.01426 ; perimeter
G1 X48.565 Y111.594 E0.01489 ; perimeter
G1 X48.499 Y111.955 E0.01513 ; perimeter
G1 X48.502 Y112.331 E0.01546 ; perimeter
G1 X48.574 Y112.709 E0.01584 ; perimeter
G1 X48.709 Y113.078 E0.01621 ; perimeter
G1 X48.904 Y113.429 E0.01654 ; perimeter
G1 X49.153 Y113.751 E0.01678 ; perimeter
G1 X49.442 Y114.031 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.53309 ; perimeter
G1 X97.381 Y137.952 E0.80046 ; perimeter
G1 X97.386 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X96.987 Y139.271 F10800.000 ; move inwards before travel
G1 F8640
G1 X94.095 Y139.236 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X83.854 Y139.843 ; move to first infill point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.072 Y139.061 E0.05567 ; infill
G1 X82.388 Y139.061 E0.03448 ; infill
G1 X83.403 Y140.077 E0.07230 ; infill
G1 X82.718 Y140.077 E0.03448 ; infill
G1 X81.703 Y139.061 E0.07230 ; infill
G1 X81.018 Y139.061 E0.03448 ; infill
G1 X82.033 Y140.077 E0.07230 ; infill
G1 X81.348 Y140.077 E0.03448 ; infill
G1 X80.333 Y139.061 E0.07230 ; infill
G1 X79.971 Y139.061 E0.01821 ; infill
G1 X79.971 Y139.384 E0.01627 ; infill
G1 X80.663 Y140.077 E0.04930 ; infill
G1 X79.978 Y140.077 E0.03448 ; infill
G1 X79.770 Y139.868 E0.01483 ; infill
G1 F8640
G1 X79.978 Y140.077 E-0.06804 ; wipe and retract
G1 X80.663 Y140.077 E-0.15815 ; wipe and retract
G1 X79.971 Y139.384 E-0.22612 ; wipe and retract
G1 X79.971 Y139.061 E-0.07462 ; wipe and retract
G1 X80.333 Y139.061 E-0.08353 ; wipe and retract
G1 X80.791 Y139.519 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X55.294 Y107.890 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X52.751 Y105.756 E0.13676 ; perimeter
G1 X50.302 Y108.675 E0.15696 ; perimeter
G1 X49.795 Y108.249 E0.02729 ; perimeter
G1 X58.792 Y97.526 E0.57663 ; perimeter
G1 X59.300 Y97.952 E0.02729 ; perimeter
G1 X56.851 Y100.871 E0.15696 ; perimeter
G1 X59.394 Y103.005 E0.13676 ; perimeter
G1 X59.050 Y103.415 E0.02205 ; perimeter
G1 X56.506 Y101.281 E0.13676 ; perimeter
G1 X53.095 Y105.346 E0.21861 ; perimeter
G1 X55.639 Y107.480 E0.13676 ; perimeter
G1 X55.333 Y107.844 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.343 Y108.449 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X52.800 Y106.315 E0.13676 ; perimeter
G1 X50.351 Y109.233 E0.15696 ; perimeter
G1 X49.236 Y108.298 E0.05995 ; perimeter
G1 X58.743 Y96.968 E0.60929 ; perimeter
G1 X59.858 Y97.903 E0.05995 ; perimeter
G1 X57.409 Y100.822 E0.15696 ; perimeter
G1 X59.952 Y102.956 E0.13676 ; perimeter
G1 X59.098 Y103.973 E0.05471 ; perimeter
G1 X56.555 Y101.839 E0.13676 ; perimeter
G1 X53.654 Y105.297 E0.18596 ; perimeter
G1 X56.197 Y107.431 E0.13676 ; perimeter
G1 X55.382 Y108.403 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.072 Y108.155 F10800.000 ; move inwards before travel
G1 F8640
G1 X52.823 Y106.333 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X91.266 Y116.190 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.25144 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X63.526 Y97.224 E0.96409 ; perimeter
G1 X63.166 Y96.963 E0.01834 ; perimeter
G1 X62.753 Y96.747 E0.01917 ; perimeter
G1 X62.317 Y96.596 E0.01903 ; perimeter
G1 X61.867 Y96.515 E0.01884 ; perimeter
G1 X61.414 Y96.510 E0.01864 ; perimeter
G1 X60.972 Y96.584 E0.01847 ; perimeter
G1 X60.554 Y96.739 E0.01834 ; perimeter
G1 X60.340 Y96.872 E0.01039 ; perimeter
G1 X59.782 Y96.403 E0.03002 ; perimeter
G1 X60.044 Y96.214 E0.01330 ; perimeter
G1 X60.365 Y96.052 E0.01484 ; perimeter
G1 X60.729 Y95.934 E0.01575 ; perimeter
G1 X61.100 Y95.871 E0.01550 ; perimeter
G1 X61.533 Y95.859 E0.01787 ; perimeter
G1 X61.769 Y95.877 E0.00976 ; perimeter
G1 X62.205 Y95.954 E0.01822 ; perimeter
G1 X62.635 Y96.087 E0.01855 ; perimeter
G1 X63.061 Y96.275 E0.01919 ; perimeter
G1 X63.466 Y96.511 E0.01932 ; perimeter
G1 X63.866 Y96.811 E0.02059 ; perimeter
G1 X81.649 Y111.732 E0.95628 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X91.610 Y115.780 E0.25946 ; perimeter
G1 X91.305 Y116.144 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X91.315 Y116.749 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.26182 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
M73 Q76 S33
G1 X63.282 Y97.537 E0.96945 ; perimeter
G1 X62.956 Y97.301 E0.01657 ; perimeter
G1 X62.596 Y97.112 E0.01678 ; perimeter
G1 X62.216 Y96.981 E0.01654 ; perimeter
G1 X61.829 Y96.911 E0.01621 ; perimeter
G1 X61.445 Y96.907 E0.01584 ; perimeter
G1 X61.074 Y96.969 E0.01546 ; perimeter
G1 X60.730 Y97.096 E0.01513 ; perimeter
G1 X60.423 Y97.287 E0.01489 ; perimeter
G1 X60.328 Y97.379 E0.00544 ; perimeter
G1 X59.196 Y96.429 E0.06089 ; perimeter
G1 X59.502 Y96.117 E0.01801 ; perimeter
G1 X59.837 Y95.875 E0.01702 ; perimeter
G1 X60.214 Y95.684 E0.01740 ; perimeter
G1 X60.630 Y95.549 E0.01803 ; perimeter
G1 X61.068 Y95.475 E0.01830 ; perimeter
G1 X61.543 Y95.462 E0.01956 ; perimeter
G1 X61.819 Y95.483 E0.01143 ; perimeter
G1 X62.298 Y95.568 E0.02004 ; perimeter
G1 X62.774 Y95.715 E0.02050 ; perimeter
G1 X63.241 Y95.920 E0.02102 ; perimeter
G1 X63.687 Y96.181 E0.02129 ; perimeter
G1 X64.113 Y96.500 E0.02191 ; perimeter
G1 X81.793 Y111.335 E0.95079 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X92.169 Y115.731 E0.28173 ; perimeter
G1 X91.354 Y116.703 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X91.026 Y116.472 F10800.000 ; move inwards before travel
G1 F8640
G1 X88.812 Y114.611 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X76.499 Y125.683 E0.09706 ; perimeter
G1 X76.843 Y125.272 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.09706 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X83.519 Y117.316 E0.09706 ; perimeter
G1 X83.863 Y116.906 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.09706 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X75.940 Y125.731 E0.09706 ; perimeter
G1 X76.794 Y124.714 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.09706 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X82.961 Y117.365 E0.09706 ; perimeter
G1 X83.814 Y116.347 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.09706 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X98.702 Y114.365 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y114.115 E0.04806 ; perimeter
G1 X97.562 Y113.602 E0.02112 ; perimeter
G1 X98.702 Y113.848 E0.04802 ; perimeter
G1 X98.702 Y114.305 E0.01883 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y114.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.166 Y114.434 E0.08142 ; perimeter
G1 X97.166 Y113.104 E0.05478 ; perimeter
G1 X99.098 Y113.524 E0.08146 ; perimeter
G1 X99.098 Y114.789 E0.05211 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y115.329 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.703 Y115.176 E0.03321 ; perimeter
G1 X96.769 Y114.753 E0.08153 ; perimeter
G1 X96.769 Y112.606 E0.08844 ; perimeter
G1 X98.200 Y112.936 E0.06046 ; perimeter
G1 X99.494 Y113.201 E0.05445 ; perimeter
G1 X99.494 Y115.269 E0.08520 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.141 Y115.142 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.703 Y115.176 E-0.18405 ; wipe and retract
G1 X96.769 Y114.753 E-0.45698 ; wipe and retract
G1 X96.769 Y114.238 E-0.11896 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X150.728 Y114.366 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y113.848 E0.02135 ; perimeter
G1 X151.868 Y113.602 E0.04802 ; perimeter
G1 X151.868 Y114.115 E0.02114 ; perimeter
G1 X150.787 Y114.353 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y114.847 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.332 Y113.524 E0.05452 ; perimeter
G1 X152.264 Y113.104 E0.08146 ; perimeter
G1 X152.264 Y114.434 E0.05480 ; perimeter
G1 X150.390 Y114.836 E0.07893 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y115.328 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.935 Y113.201 E0.08765 ; perimeter
G1 X151.230 Y112.936 E0.05445 ; perimeter
G1 X152.660 Y112.606 E0.06046 ; perimeter
G1 X152.660 Y114.753 E0.08845 ; perimeter
G1 X150.851 Y115.150 E0.07630 ; perimeter
G1 X149.994 Y115.317 E0.03597 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.111 Y114.969 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.935 Y113.201 E-0.48884 ; wipe and retract
G1 X151.086 Y112.965 E-0.27116 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X165.566 Y116.906 E0.09706 ; perimeter
G1 X165.910 Y117.316 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.09706 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X172.587 Y125.272 E0.09706 ; perimeter
G1 X172.931 Y125.683 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.09706 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X165.615 Y116.347 E0.09706 ; perimeter
G1 X166.469 Y117.365 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.09706 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X172.636 Y124.714 E0.09706 ; perimeter
G1 X173.489 Y125.731 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.09706 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X158.163 Y116.190 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X157.819 Y115.780 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.25946 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X185.563 Y96.811 E0.95628 ; perimeter
G1 X185.963 Y96.511 E0.02059 ; perimeter
G1 X186.368 Y96.275 E0.01932 ; perimeter
G1 X186.795 Y96.087 E0.01919 ; perimeter
G1 X187.225 Y95.954 E0.01855 ; perimeter
G1 X187.653 Y95.878 E0.01790 ; perimeter
G1 X188.078 Y95.857 E0.01756 ; perimeter
G1 X188.311 Y95.869 E0.00960 ; perimeter
G1 X188.716 Y95.937 E0.01693 ; perimeter
G1 X189.060 Y96.049 E0.01488 ; perimeter
G1 X189.386 Y96.214 E0.01506 ; perimeter
G1 X189.647 Y96.403 E0.01330 ; perimeter
G1 X189.089 Y96.872 E0.03002 ; perimeter
G1 X188.875 Y96.739 E0.01039 ; perimeter
G1 X188.458 Y96.584 E0.01834 ; perimeter
G1 X188.016 Y96.510 E0.01847 ; perimeter
G1 X187.563 Y96.515 E0.01864 ; perimeter
G1 X187.113 Y96.596 E0.01884 ; perimeter
G1 X186.676 Y96.747 E0.01903 ; perimeter
G1 X186.266 Y96.962 E0.01909 ; perimeter
G1 X185.954 Y97.185 E0.01578 ; perimeter
G1 X167.976 Y112.267 E0.96673 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X158.209 Y116.152 E0.24896 ; perimeter
M204 S1000 ; adjust acceleration
G1 X158.115 Y116.749 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X157.261 Y115.731 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.28173 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X185.317 Y96.500 E0.95079 ; perimeter
G1 X185.743 Y96.181 E0.02191 ; perimeter
G1 X186.189 Y95.920 E0.02129 ; perimeter
G1 X186.656 Y95.715 E0.02102 ; perimeter
G1 X187.131 Y95.568 E0.02050 ; perimeter
G1 X187.608 Y95.483 E0.01993 ; perimeter
G1 X188.079 Y95.460 E0.01944 ; perimeter
G1 X188.355 Y95.474 E0.01138 ; perimeter
G1 X188.805 Y95.550 E0.01882 ; perimeter
G1 X188.953 Y95.594 E0.00634 ; perimeter
G1 X189.214 Y95.683 E0.01138 ; perimeter
G1 X189.593 Y95.875 E0.01748 ; perimeter
G1 X189.927 Y96.117 E0.01702 ; perimeter
G1 X190.234 Y96.429 E0.01801 ; perimeter
G1 X189.102 Y97.379 E0.06089 ; perimeter
G1 X189.007 Y97.287 E0.00544 ; perimeter
G1 X188.700 Y97.096 E0.01489 ; perimeter
G1 X188.355 Y96.969 E0.01513 ; perimeter
G1 X187.985 Y96.907 E0.01546 ; perimeter
G1 X187.601 Y96.911 E0.01584 ; perimeter
G1 X187.213 Y96.981 E0.01621 ; perimeter
G1 X186.834 Y97.112 E0.01654 ; perimeter
G1 X186.474 Y97.301 E0.01675 ; perimeter
G1 X186.197 Y97.498 E0.01401 ; perimeter
G1 X168.120 Y112.663 E0.97204 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X158.160 Y116.710 E0.25935 ; perimeter
M204 S1000 ; adjust acceleration
G1 X158.086 Y116.350 F10800.000 ; move inwards before travel
G1 F8640
G1 X157.261 Y115.731 E-0.30695 ; wipe and retract
G1 X158.764 Y114.470 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X194.135 Y107.890 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X193.791 Y107.480 E0.02205 ; perimeter
G1 X196.334 Y105.346 E0.13676 ; perimeter
G1 X192.923 Y101.281 E0.21861 ; perimeter
G1 X190.380 Y103.415 E0.13676 ; perimeter
G1 X190.036 Y103.005 E0.02205 ; perimeter
G1 X192.579 Y100.871 E0.13676 ; perimeter
G1 X190.130 Y97.952 E0.15696 ; perimeter
G1 X190.638 Y97.526 E0.02729 ; perimeter
G1 X199.635 Y108.249 E0.57663 ; perimeter
G1 X199.127 Y108.675 E0.02729 ; perimeter
G1 X196.678 Y105.756 E0.15696 ; perimeter
G1 X194.181 Y107.852 E0.13429 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.086 Y108.449 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X193.233 Y107.431 E0.05471 ; perimeter
G1 X195.776 Y105.297 E0.13676 ; perimeter
G1 X192.874 Y101.839 E0.18596 ; perimeter
G1 X190.331 Y103.973 E0.13676 ; perimeter
G1 X189.478 Y102.956 E0.05471 ; perimeter
G1 X192.021 Y100.822 E0.13676 ; perimeter
G1 X189.572 Y97.903 E0.15696 ; perimeter
G1 X190.686 Y96.968 E0.05995 ; perimeter
G1 X200.193 Y108.298 E0.60929 ; perimeter
G1 X199.078 Y109.233 E0.05995 ; perimeter
G1 X196.629 Y106.315 E0.15696 ; perimeter
G1 X194.132 Y108.410 E0.13429 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.130 Y108.051 F10800.000 ; move inwards before travel
G1 F8640
G1 X193.233 Y107.431 E-0.30695 ; wipe and retract
G1 X194.736 Y106.170 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X152.441 Y138.884 ; move to first perimeter point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X152.444 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E0.79014 ; perimeter
G1 X200.253 Y114.326 E1.53962 ; perimeter
G1 X200.573 Y114.016 E0.01834 ; perimeter
G1 X200.857 Y113.647 E0.01917 ; perimeter
G1 X201.082 Y113.244 E0.01903 ; perimeter
G1 X201.239 Y112.814 E0.01884 ; perimeter
G1 X201.323 Y112.370 E0.01864 ; perimeter
G1 X201.327 Y111.921 E0.01847 ; perimeter
G1 X201.247 Y111.483 E0.01834 ; perimeter
G1 X201.083 Y111.074 E0.01817 ; perimeter
G1 X200.878 Y110.764 E0.01532 ; perimeter
G1 X200.089 Y109.822 E0.05062 ; perimeter
G1 X200.597 Y109.395 E0.02733 ; perimeter
G1 X201.487 Y110.456 E0.05706 ; perimeter
G1 X201.700 Y110.758 E0.01519 ; perimeter
G1 X201.853 Y111.071 E0.01438 ; perimeter
G1 X201.958 Y111.421 E0.01506 ; perimeter
G1 X202.009 Y111.779 E0.01488 ; perimeter
G1 X202.006 Y112.190 E0.01693 ; perimeter
G1 X201.978 Y112.421 E0.00960 ; perimeter
G1 X201.883 Y112.837 E0.01756 ; perimeter
G1 X201.733 Y113.245 E0.01790 ; perimeter
G1 X201.526 Y113.649 E0.01872 ; perimeter
G1 X201.273 Y114.028 E0.01878 ; perimeter
G1 X200.964 Y114.392 E0.01966 ; perimeter
G1 X200.601 Y114.732 E0.02050 ; perimeter
G1 X171.819 Y138.884 E1.54786 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X152.501 Y138.884 E0.51752 ; perimeter
M204 S1000 ; adjust acceleration
G1 X152.043 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X152.049 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E0.80046 ; perimeter
G1 X199.988 Y114.031 E1.53309 ; perimeter
G1 X200.277 Y113.751 E0.01657 ; perimeter
G1 X200.525 Y113.429 E0.01678 ; perimeter
G1 X200.720 Y113.078 E0.01654 ; perimeter
G1 X200.856 Y112.709 E0.01621 ; perimeter
G1 X200.927 Y112.331 E0.01584 ; perimeter
G1 X200.931 Y111.955 E0.01546 ; perimeter
G1 X200.865 Y111.594 E0.01513 ; perimeter
G1 X200.730 Y111.259 E0.01486 ; perimeter
G1 X200.559 Y111.002 E0.01274 ; perimeter
G1 X199.531 Y109.773 E0.06602 ; perimeter
G1 X200.646 Y108.837 E0.05996 ; perimeter
G1 X201.801 Y110.214 E0.07406 ; perimeter
G1 X202.043 Y110.555 E0.01720 ; perimeter
G1 X202.223 Y110.927 E0.01702 ; perimeter
G1 X202.346 Y111.333 E0.01748 ; perimeter
G1 X202.406 Y111.759 E0.01771 ; perimeter
G1 X202.402 Y112.215 E0.01882 ; perimeter
G1 X202.369 Y112.490 E0.01138 ; perimeter
G1 X202.264 Y112.950 E0.01944 ; perimeter
G1 X202.097 Y113.404 E0.01993 ; perimeter
G1 X201.870 Y113.848 E0.02056 ; perimeter
G1 X201.588 Y114.269 E0.02087 ; perimeter
G1 X201.252 Y114.665 E0.02142 ; perimeter
G1 X200.865 Y115.029 E0.02187 ; perimeter
G1 X171.963 Y139.280 E1.55426 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X152.103 Y139.280 E0.51759 ; perimeter
M204 S1000 ; adjust acceleration
G1 X152.256 Y138.942 F10800.000 ; move inwards before travel
G1 F8640
G1 X152.049 Y137.952 E-0.30689 ; wipe and retract
G1 X154.011 Y137.952 E-0.45311 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
G1 X165.575 Y139.868 ; move to first infill point
G1 Z16.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.784 Y140.077 E0.01484 ; infill
G1 X166.469 Y140.077 E0.03448 ; infill
G1 X165.776 Y139.384 E0.04930 ; infill
G1 X165.776 Y139.061 E0.01627 ; infill
G1 X166.138 Y139.061 E0.01821 ; infill
G1 X167.153 Y140.077 E0.07230 ; infill
G1 X167.838 Y140.077 E0.03448 ; infill
G1 X166.823 Y139.061 E0.07230 ; infill
G1 X167.508 Y139.061 E0.03448 ; infill
G1 X168.523 Y140.077 E0.07230 ; infill
G1 X169.208 Y140.077 E0.03448 ; infill
G1 X168.193 Y139.061 E0.07230 ; infill
G1 X168.878 Y139.061 E0.03448 ; infill
G1 X169.660 Y139.843 E0.05567 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;17


G1 F8640
G1 X168.878 Y139.061 E-0.25535 ; wipe and retract
G1 X168.193 Y139.061 E-0.15815 ; wipe and retract
G1 X169.208 Y140.077 E-0.33164 ; wipe and retract
G1 X169.144 Y140.077 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;17
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.840 Y102.239 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X97.018 Y100.738 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.651 Y100.738 E0.50948 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.253 Y102.643 E0.02319 ; perimeter
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X48.979 Y76.474 E1.55507 ; perimeter
G1 X48.618 Y76.134 E0.02043 ; perimeter
G1 X48.312 Y75.774 E0.01945 ; perimeter
G1 X48.054 Y75.390 E0.01904 ; perimeter
G1 X47.849 Y74.991 E0.01850 ; perimeter
G1 X47.700 Y74.584 E0.01786 ; perimeter
G1 X47.604 Y74.170 E0.01750 ; perimeter
G1 X47.574 Y73.925 E0.01018 ; perimeter
G1 X47.572 Y73.525 E0.01647 ; perimeter
G1 X47.625 Y73.155 E0.01542 ; perimeter
G1 X47.729 Y72.811 E0.01479 ; perimeter
G1 X47.881 Y72.498 E0.01434 ; perimeter
G1 X48.093 Y72.198 E0.01515 ; perimeter
G1 X48.984 Y71.137 E0.05706 ; perimeter
G1 X49.491 Y71.563 E0.02729 ; perimeter
G1 X48.727 Y72.474 E0.04901 ; perimeter
G1 X48.498 Y72.814 E0.01685 ; perimeter
G1 X48.333 Y73.225 E0.01826 ; perimeter
G1 X48.253 Y73.663 E0.01834 ; perimeter
G1 X48.257 Y74.111 E0.01847 ; perimeter
G1 X48.341 Y74.556 E0.01864 ; perimeter
G1 X48.499 Y74.985 E0.01884 ; perimeter
G1 X48.723 Y75.389 E0.01903 ; perimeter
G1 X49.008 Y75.757 E0.01917 ; perimeter
G1 X49.327 Y76.067 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.54683 ; perimeter
G1 X97.017 Y100.203 E0.77969 ; perimeter
G1 X97.018 Y100.678 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X97.415 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.50951 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03671 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X48.716 Y76.770 E1.56147 ; perimeter
G1 X48.330 Y76.408 E0.02181 ; perimeter
G1 X47.995 Y76.014 E0.02130 ; perimeter
G1 X47.712 Y75.592 E0.02093 ; perimeter
G1 X47.486 Y75.150 E0.02044 ; perimeter
G1 X47.319 Y74.698 E0.01988 ; perimeter
G1 X47.213 Y74.239 E0.01939 ; perimeter
G1 X47.178 Y73.950 E0.01199 ; perimeter
G1 X47.175 Y73.498 E0.01861 ; perimeter
G1 X47.236 Y73.069 E0.01787 ; perimeter
G1 X47.358 Y72.666 E0.01735 ; perimeter
G1 X47.539 Y72.295 E0.01697 ; perimeter
G1 X47.779 Y71.956 E0.01715 ; perimeter
G1 X48.935 Y70.578 E0.07406 ; perimeter
G1 X50.050 Y71.514 E0.05995 ; perimeter
G1 X49.044 Y72.713 E0.06447 ; perimeter
G1 X48.851 Y73.000 E0.01426 ; perimeter
G1 X48.716 Y73.335 E0.01489 ; perimeter
G1 X48.650 Y73.697 E0.01513 ; perimeter
G1 X48.653 Y74.072 E0.01546 ; perimeter
G1 X48.725 Y74.450 E0.01584 ; perimeter
G1 X48.860 Y74.819 E0.01621 ; perimeter
G1 X49.055 Y75.170 E0.01654 ; perimeter
G1 X49.304 Y75.493 E0.01678 ; perimeter
G1 X49.593 Y75.773 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.54030 ; perimeter
G1 X97.413 Y99.806 E0.79005 ; perimeter
G1 X97.415 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X97.016 Y101.125 F10800.000 ; move inwards before travel
G1 F8640
G1 X94.124 Y101.090 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X83.730 Y102.131 ; move to first infill point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.939 Y101.923 E0.01484 ; infill
G1 X83.939 Y101.238 E0.03448 ; infill
G1 X83.246 Y101.931 E0.04931 ; infill
G1 X82.561 Y101.931 E0.03448 ; infill
G1 X83.577 Y100.915 E0.07230 ; infill
G1 X82.892 Y100.915 E0.03448 ; infill
G1 X81.876 Y101.931 E0.07230 ; infill
G1 X81.191 Y101.931 E0.03448 ; infill
G1 X82.207 Y100.915 E0.07230 ; infill
G1 X81.522 Y100.915 E0.03448 ; infill
G1 X80.506 Y101.931 E0.07230 ; infill
G1 X80.256 Y101.931 E0.01260 ; infill
G1 X80.256 Y101.496 E0.02188 ; infill
G1 X81.038 Y100.714 E0.05566 ; infill
G1 F8640
G1 X80.256 Y101.496 E-0.25530 ; wipe and retract
G1 X80.256 Y101.931 E-0.10036 ; wipe and retract
G1 X80.506 Y101.931 E-0.05779 ; wipe and retract
G1 X81.522 Y100.915 E-0.33164 ; wipe and retract
G1 X81.587 Y100.915 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X55.441 Y69.627 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X52.902 Y67.498 E0.13649 ; perimeter
G1 X50.453 Y70.416 E0.15696 ; perimeter
G1 X49.946 Y69.990 E0.02729 ; perimeter
G1 X58.943 Y59.268 E0.57663 ; perimeter
G1 X59.451 Y59.694 E0.02729 ; perimeter
G1 X57.002 Y62.612 E0.15696 ; perimeter
G1 X59.540 Y64.742 E0.13649 ; perimeter
G1 X59.196 Y65.152 E0.02205 ; perimeter
G1 X56.658 Y63.022 E0.13649 ; perimeter
G1 X53.246 Y67.087 E0.21861 ; perimeter
G1 X55.785 Y69.217 E0.13649 ; perimeter
G1 X55.479 Y69.581 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.489 Y70.186 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X52.951 Y68.056 E0.13649 ; perimeter
G1 X50.502 Y70.975 E0.15696 ; perimeter
G1 X49.387 Y70.039 E0.05995 ; perimeter
G1 X58.894 Y58.709 E0.60929 ; perimeter
G1 X60.009 Y59.645 E0.05995 ; perimeter
G1 X57.560 Y62.563 E0.15696 ; perimeter
G1 X60.098 Y64.693 E0.13649 ; perimeter
G1 X59.245 Y65.710 E0.05471 ; perimeter
G1 X56.706 Y63.581 E0.13649 ; perimeter
G1 X53.805 Y67.039 E0.18596 ; perimeter
G1 X56.343 Y69.168 E0.13649 ; perimeter
G1 X55.528 Y70.140 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.218 Y69.892 F10800.000 ; move inwards before travel
G1 F8640
G1 X52.969 Y68.070 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X91.360 Y77.883 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.24114 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X63.677 Y58.965 E0.97130 ; perimeter
G1 X63.317 Y58.704 E0.01834 ; perimeter
G1 X62.904 Y58.489 E0.01917 ; perimeter
G1 X62.468 Y58.337 E0.01903 ; perimeter
G1 X62.018 Y58.257 E0.01884 ; perimeter
G1 X61.565 Y58.251 E0.01864 ; perimeter
G1 X61.123 Y58.325 E0.01847 ; perimeter
G1 X60.706 Y58.480 E0.01834 ; perimeter
G1 X60.492 Y58.613 E0.01039 ; perimeter
G1 X59.933 Y58.145 E0.03002 ; perimeter
G1 X60.193 Y57.956 E0.01322 ; perimeter
G1 X60.513 Y57.794 E0.01479 ; perimeter
G1 X60.875 Y57.676 E0.01567 ; perimeter
G1 X61.244 Y57.613 E0.01544 ; perimeter
G1 X61.676 Y57.600 E0.01780 ; perimeter
G1 X61.927 Y57.619 E0.01037 ; perimeter
G1 X62.361 Y57.697 E0.01815 ; perimeter
G1 X62.790 Y57.829 E0.01850 ; perimeter
G1 X63.215 Y58.017 E0.01914 ; perimeter
G1 X63.619 Y58.254 E0.01927 ; perimeter
G1 X64.017 Y58.552 E0.02052 ; perimeter
G1 X81.934 Y73.586 E0.96349 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X91.704 Y77.473 E0.24916 ; perimeter
M73 P76 R31
G1 X91.398 Y77.837 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X91.409 Y78.442 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.25152 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X63.433 Y59.278 E0.97666 ; perimeter
G1 X63.108 Y59.042 E0.01657 ; perimeter
G1 X62.747 Y58.853 E0.01678 ; perimeter
G1 X62.367 Y58.722 E0.01654 ; perimeter
G1 X61.980 Y58.653 E0.01621 ; perimeter
G1 X61.596 Y58.648 E0.01584 ; perimeter
G1 X61.225 Y58.710 E0.01546 ; perimeter
G1 X60.881 Y58.838 E0.01513 ; perimeter
G1 X60.574 Y59.029 E0.01489 ; perimeter
G1 X60.479 Y59.120 E0.00544 ; perimeter
G1 X59.347 Y58.170 E0.06089 ; perimeter
G1 X59.652 Y57.859 E0.01797 ; perimeter
G1 X59.986 Y57.617 E0.01697 ; perimeter
G1 X60.362 Y57.427 E0.01735 ; perimeter
G1 X60.776 Y57.292 E0.01796 ; perimeter
G1 X61.212 Y57.217 E0.01824 ; perimeter
G1 X61.685 Y57.203 E0.01949 ; perimeter
G1 X61.977 Y57.225 E0.01207 ; perimeter
G1 X62.455 Y57.311 E0.01999 ; perimeter
G1 X62.929 Y57.457 E0.02044 ; perimeter
G1 X63.394 Y57.663 E0.02096 ; perimeter
G1 X63.839 Y57.924 E0.02123 ; perimeter
G1 X64.264 Y58.241 E0.02184 ; perimeter
G1 X82.078 Y73.189 E0.95801 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X92.262 Y77.424 E0.27143 ; perimeter
G1 X91.447 Y78.396 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X91.120 Y78.165 F10800.000 ; move inwards before travel
G1 F8640
G1 X88.905 Y76.305 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.846 Y87.589 E0.09371 ; perimeter
G1 X77.190 Y87.179 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.09371 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X83.867 Y79.222 E0.09371 ; perimeter
G1 X84.211 Y78.812 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.09371 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X76.288 Y87.637 E0.09371 ; perimeter
G1 X77.141 Y86.620 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.09371 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X83.308 Y79.271 E0.09371 ; perimeter
G1 X84.162 Y78.253 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.09371 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X98.987 Y76.219 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.848 Y75.969 E0.04804 ; perimeter
G1 X97.848 Y75.457 E0.02109 ; perimeter
G1 X98.987 Y75.700 E0.04798 ; perimeter
G1 X98.987 Y76.159 E0.01887 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y76.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.451 Y76.288 E0.08141 ; perimeter
G1 X97.452 Y74.958 E0.05480 ; perimeter
G1 X98.269 Y75.148 E0.03456 ; perimeter
G1 X99.383 Y75.377 E0.04687 ; perimeter
G1 X99.383 Y76.643 E0.05213 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y77.183 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.988 Y77.030 E0.03321 ; perimeter
G1 X97.055 Y76.607 E0.08153 ; perimeter
G1 X97.056 Y74.458 E0.08851 ; perimeter
G1 X98.354 Y74.761 E0.05491 ; perimeter
G1 X99.780 Y75.054 E0.05996 ; perimeter
G1 X99.780 Y77.123 E0.08521 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.424 Y77.000 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.988 Y77.030 E-0.18405 ; wipe and retract
G1 X97.055 Y76.607 E-0.45696 ; wipe and retract
G1 X97.055 Y76.091 E-0.11899 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X151.013 Y76.219 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y75.700 E0.02134 ; perimeter
G1 X152.153 Y75.457 E0.04801 ; perimeter
G1 X152.153 Y75.969 E0.02110 ; perimeter
G1 X151.072 Y76.206 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y76.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.617 Y75.377 E0.05460 ; perimeter
G1 X151.731 Y75.148 E0.04687 ; perimeter
G1 X152.549 Y74.957 E0.03460 ; perimeter
G1 X152.549 Y76.288 E0.05481 ; perimeter
G1 X150.676 Y76.691 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y77.183 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.220 Y75.054 E0.08768 ; perimeter
G1 X151.646 Y74.761 E0.05996 ; perimeter
G1 X152.945 Y74.458 E0.05496 ; perimeter
G1 X152.945 Y76.607 E0.08852 ; perimeter
G1 X151.012 Y77.030 E0.08153 ; perimeter
G1 X150.279 Y77.171 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.396 Y76.823 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.220 Y75.054 E-0.48903 ; wipe and retract
G1 X151.370 Y74.818 E-0.27097 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X165.789 Y78.812 E0.09371 ; perimeter
G1 X166.133 Y79.222 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.09371 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X172.810 Y87.179 E0.09371 ; perimeter
G1 X173.154 Y87.589 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.09371 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X165.838 Y78.253 E0.09371 ; perimeter
G1 X166.692 Y79.271 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.09371 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X172.859 Y86.620 E0.09371 ; perimeter
G1 X173.712 Y87.637 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.09371 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X158.640 Y77.883 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X158.296 Y77.473 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.24916 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X185.983 Y58.552 E0.96349 ; perimeter
G1 X186.381 Y58.254 E0.02052 ; perimeter
G1 X186.785 Y58.017 E0.01927 ; perimeter
G1 X187.210 Y57.829 E0.01914 ; perimeter
G1 X187.639 Y57.697 E0.01850 ; perimeter
G1 X188.066 Y57.620 E0.01786 ; perimeter
G1 X188.490 Y57.598 E0.01750 ; perimeter
G1 X188.737 Y57.611 E0.01018 ; perimeter
G1 X189.140 Y57.680 E0.01687 ; perimeter
G1 X189.482 Y57.792 E0.01483 ; perimeter
G1 X189.807 Y57.956 E0.01499 ; perimeter
G1 X190.067 Y58.145 E0.01322 ; perimeter
G1 X189.508 Y58.613 E0.03002 ; perimeter
G1 X189.294 Y58.480 E0.01039 ; perimeter
G1 X188.877 Y58.325 E0.01834 ; perimeter
G1 X188.435 Y58.251 E0.01847 ; perimeter
G1 X187.982 Y58.257 E0.01864 ; perimeter
G1 X187.532 Y58.337 E0.01884 ; perimeter
G1 X187.096 Y58.489 E0.01903 ; perimeter
G1 X186.685 Y58.704 E0.01910 ; perimeter
G1 X186.370 Y58.929 E0.01597 ; perimeter
G1 X168.261 Y74.121 E0.97374 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X158.686 Y77.845 E0.23867 ; perimeter
M204 S1000 ; adjust acceleration
G1 X158.591 Y78.442 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X157.738 Y77.424 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.27143 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X185.736 Y58.241 E0.95801 ; perimeter
G1 X186.161 Y57.924 E0.02184 ; perimeter
G1 X186.606 Y57.663 E0.02123 ; perimeter
G1 X187.071 Y57.457 E0.02096 ; perimeter
G1 X187.545 Y57.311 E0.02044 ; perimeter
G1 X188.020 Y57.225 E0.01988 ; perimeter
G1 X188.490 Y57.201 E0.01939 ; perimeter
G1 X188.781 Y57.216 E0.01199 ; perimeter
G1 X189.362 Y57.332 E0.02442 ; perimeter
G1 X189.637 Y57.426 E0.01196 ; perimeter
G1 X190.014 Y57.617 E0.01742 ; perimeter
G1 X190.348 Y57.859 E0.01697 ; perimeter
G1 X190.653 Y58.170 E0.01797 ; perimeter
G1 X189.521 Y59.120 E0.06089 ; perimeter
G1 X189.426 Y59.029 E0.00544 ; perimeter
G1 X189.119 Y58.838 E0.01489 ; perimeter
G1 X188.775 Y58.710 E0.01513 ; perimeter
G1 X188.404 Y58.648 E0.01546 ; perimeter
G1 X188.020 Y58.653 E0.01584 ; perimeter
G1 X187.633 Y58.722 E0.01621 ; perimeter
G1 X187.253 Y58.853 E0.01654 ; perimeter
G1 X186.893 Y59.042 E0.01675 ; perimeter
G1 X186.613 Y59.243 E0.01420 ; perimeter
G1 X168.405 Y74.517 E0.97906 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X158.637 Y78.403 E0.24905 ; perimeter
M204 S1000 ; adjust acceleration
G1 X158.564 Y78.043 F10800.000 ; move inwards before travel
G1 F8640
G1 X157.738 Y77.424 E-0.30695 ; wipe and retract
G1 X159.241 Y76.163 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X194.559 Y69.627 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X194.215 Y69.217 E0.02205 ; perimeter
G1 X196.754 Y67.087 E0.13649 ; perimeter
G1 X193.342 Y63.022 E0.21861 ; perimeter
G1 X190.804 Y65.152 E0.13649 ; perimeter
G1 X190.460 Y64.742 E0.02205 ; perimeter
G1 X192.998 Y62.612 E0.13649 ; perimeter
G1 X190.549 Y59.694 E0.15696 ; perimeter
G1 X191.057 Y59.268 E0.02730 ; perimeter
G1 X200.054 Y69.990 E0.57663 ; perimeter
G1 X199.547 Y70.416 E0.02729 ; perimeter
G1 X197.098 Y67.498 E0.15696 ; perimeter
G1 X194.605 Y69.589 E0.13402 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.511 Y70.186 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X193.657 Y69.168 E0.05471 ; perimeter
G1 X196.195 Y67.039 E0.13649 ; perimeter
G1 X193.294 Y63.581 E0.18596 ; perimeter
G1 X190.755 Y65.710 E0.13649 ; perimeter
G1 X189.902 Y64.693 E0.05471 ; perimeter
G1 X192.440 Y62.563 E0.13649 ; perimeter
G1 X189.991 Y59.645 E0.15696 ; perimeter
G1 X191.106 Y58.709 E0.05995 ; perimeter
G1 X200.613 Y70.039 E0.60929 ; perimeter
G1 X199.498 Y70.975 E0.05995 ; perimeter
G1 X197.049 Y68.056 E0.15696 ; perimeter
G1 X194.557 Y70.147 E0.13402 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.555 Y69.788 F10800.000 ; move inwards before travel
G1 F8640
G1 X193.657 Y69.168 E-0.30695 ; wipe and retract
M73 Q77 S32
G1 X195.160 Y67.907 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.745 Y102.081 E-0.06470 ; wipe and retract
G1 X165.745 Y100.599 E-0.34214 ; wipe and retract
G1 X167.275 Y100.599 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X152.982 Y100.738 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X152.983 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E0.77969 ; perimeter
G1 X200.673 Y76.067 E1.54683 ; perimeter
G1 X200.992 Y75.757 E0.01834 ; perimeter
G1 X201.277 Y75.389 E0.01917 ; perimeter
G1 X201.501 Y74.985 E0.01903 ; perimeter
G1 X201.659 Y74.556 E0.01884 ; perimeter
G1 X201.743 Y74.111 E0.01864 ; perimeter
G1 X201.747 Y73.663 E0.01847 ; perimeter
G1 X201.667 Y73.225 E0.01834 ; perimeter
G1 X201.502 Y72.814 E0.01826 ; perimeter
G1 X201.273 Y72.474 E0.01685 ; perimeter
G1 X200.509 Y71.563 E0.04901 ; perimeter
G1 X201.016 Y71.137 E0.02729 ; perimeter
G1 X201.907 Y72.198 E0.05706 ; perimeter
G1 X202.119 Y72.498 E0.01515 ; perimeter
G1 X202.271 Y72.811 E0.01434 ; perimeter
G1 X202.377 Y73.159 E0.01499 ; perimeter
G1 X202.428 Y73.516 E0.01483 ; perimeter
G1 X202.426 Y73.925 E0.01687 ; perimeter
G1 X202.396 Y74.170 E0.01018 ; perimeter
G1 X202.300 Y74.584 E0.01750 ; perimeter
G1 X202.151 Y74.991 E0.01786 ; perimeter
G1 X201.944 Y75.394 E0.01868 ; perimeter
G1 X201.690 Y75.772 E0.01872 ; perimeter
G1 X201.382 Y76.134 E0.01959 ; perimeter
G1 X201.021 Y76.474 E0.02043 ; perimeter
G1 X172.104 Y100.738 E1.55507 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.747 Y102.643 E0.17761 ; perimeter
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X153.042 Y100.738 E0.50701 ; perimeter
M204 S1000 ; adjust acceleration
G1 X152.585 Y101.134 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X152.587 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E0.79005 ; perimeter
G1 X200.407 Y75.773 E1.54030 ; perimeter
G1 X200.696 Y75.493 E0.01657 ; perimeter
G1 X200.945 Y75.170 E0.01678 ; perimeter
G1 X201.140 Y74.819 E0.01654 ; perimeter
G1 X201.275 Y74.450 E0.01621 ; perimeter
G1 X201.347 Y74.072 E0.01584 ; perimeter
G1 X201.350 Y73.697 E0.01546 ; perimeter
G1 X201.284 Y73.335 E0.01513 ; perimeter
G1 X201.149 Y73.000 E0.01489 ; perimeter
G1 X200.956 Y72.713 E0.01426 ; perimeter
G1 X199.950 Y71.514 E0.06447 ; perimeter
G1 X201.065 Y70.578 E0.05995 ; perimeter
G1 X202.221 Y71.956 E0.07406 ; perimeter
G1 X202.461 Y72.295 E0.01715 ; perimeter
G1 X202.642 Y72.666 E0.01697 ; perimeter
G1 X202.764 Y73.070 E0.01742 ; perimeter
G1 X202.825 Y73.495 E0.01766 ; perimeter
G1 X202.822 Y73.950 E0.01875 ; perimeter
G1 X202.787 Y74.239 E0.01199 ; perimeter
G1 X202.681 Y74.698 E0.01939 ; perimeter
G1 X202.514 Y75.150 E0.01988 ; perimeter
G1 X202.287 Y75.593 E0.02051 ; perimeter
G1 X202.006 Y76.013 E0.02081 ; perimeter
G1 X201.670 Y76.408 E0.02135 ; perimeter
G1 X201.284 Y76.770 E0.02181 ; perimeter
G1 X172.248 Y101.134 E1.56147 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X152.645 Y101.134 E0.50704 ; perimeter
M204 S1000 ; adjust acceleration
G1 X152.797 Y100.795 F10800.000 ; move inwards before travel
G1 F8640
G1 X152.587 Y99.806 E-0.30693 ; wipe and retract
G1 X154.549 Y99.806 E-0.45307 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X166.843 Y100.714 ; move to first infill point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.061 Y101.496 E0.05566 ; infill
G1 X166.061 Y101.931 E0.02188 ; infill
G1 X166.312 Y101.931 E0.01260 ; infill
G1 X167.327 Y100.915 E0.07230 ; infill
G1 X168.012 Y100.915 E0.03448 ; infill
G1 X166.996 Y101.931 E0.07230 ; infill
G1 X167.681 Y101.931 E0.03448 ; infill
G1 X168.697 Y100.915 E0.07230 ; infill
G1 X169.382 Y100.915 E0.03448 ; infill
G1 X168.366 Y101.931 E0.07230 ; infill
G1 X169.051 Y101.931 E0.03448 ; infill
G1 X169.744 Y101.238 E0.04931 ; infill
G1 X169.744 Y101.923 E0.03448 ; infill
G1 X169.535 Y102.131 E0.01484 ; infill
G1 F8640
G1 X169.744 Y101.923 E-0.06809 ; wipe and retract
G1 X169.744 Y101.238 E-0.15815 ; wipe and retract
G1 X169.051 Y101.931 E-0.22616 ; wipe and retract
G1 X168.366 Y101.931 E-0.15815 ; wipe and retract
G1 X168.824 Y101.473 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.555 Y140.385 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X96.733 Y138.884 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X84.366 Y138.884 E0.50948 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X83.968 Y140.789 E0.02319 ; perimeter
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X48.694 Y114.620 E1.55507 ; perimeter
G1 X48.332 Y114.280 E0.02043 ; perimeter
G1 X48.027 Y113.921 E0.01945 ; perimeter
G1 X47.769 Y113.537 E0.01904 ; perimeter
G1 X47.564 Y113.137 E0.01850 ; perimeter
G1 X47.414 Y112.730 E0.01786 ; perimeter
G1 X47.319 Y112.316 E0.01750 ; perimeter
G1 X47.289 Y112.071 E0.01018 ; perimeter
G1 X47.287 Y111.671 E0.01647 ; perimeter
G1 X47.339 Y111.301 E0.01542 ; perimeter
G1 X47.443 Y110.957 E0.01479 ; perimeter
G1 X47.596 Y110.644 E0.01434 ; perimeter
G1 X47.808 Y110.344 E0.01515 ; perimeter
G1 X48.699 Y109.283 E0.05706 ; perimeter
G1 X49.206 Y109.709 E0.02729 ; perimeter
G1 X48.441 Y110.620 E0.04901 ; perimeter
G1 X48.213 Y110.960 E0.01685 ; perimeter
G1 X48.048 Y111.371 E0.01826 ; perimeter
G1 X47.968 Y111.809 E0.01834 ; perimeter
G1 X47.972 Y112.257 E0.01847 ; perimeter
G1 X48.056 Y112.702 E0.01864 ; perimeter
G1 X48.214 Y113.131 E0.01884 ; perimeter
G1 X48.438 Y113.535 E0.01903 ; perimeter
G1 X48.722 Y113.903 E0.01917 ; perimeter
G1 X49.042 Y114.213 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.54683 ; perimeter
G1 X96.732 Y138.349 E0.77969 ; perimeter
G1 X96.733 Y138.824 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X97.130 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.50951 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03671 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X48.431 Y114.916 E1.56147 ; perimeter
G1 X48.045 Y114.554 E0.02181 ; perimeter
G1 X47.710 Y114.160 E0.02130 ; perimeter
G1 X47.427 Y113.738 E0.02093 ; perimeter
G1 X47.201 Y113.297 E0.02044 ; perimeter
G1 X47.034 Y112.844 E0.01988 ; perimeter
G1 X46.928 Y112.385 E0.01939 ; perimeter
G1 X46.893 Y112.096 E0.01199 ; perimeter
G1 X46.890 Y111.644 E0.01861 ; perimeter
G1 X46.951 Y111.215 E0.01787 ; perimeter
G1 X47.073 Y110.812 E0.01735 ; perimeter
G1 X47.254 Y110.442 E0.01697 ; perimeter
G1 X47.494 Y110.102 E0.01715 ; perimeter
G1 X48.650 Y108.725 E0.07406 ; perimeter
G1 X49.765 Y109.660 E0.05995 ; perimeter
G1 X48.759 Y110.859 E0.06447 ; perimeter
G1 X48.565 Y111.146 E0.01426 ; perimeter
G1 X48.431 Y111.481 E0.01489 ; perimeter
G1 X48.365 Y111.843 E0.01513 ; perimeter
G1 X48.368 Y112.218 E0.01546 ; perimeter
G1 X48.439 Y112.596 E0.01584 ; perimeter
G1 X48.575 Y112.965 E0.01621 ; perimeter
G1 X48.770 Y113.316 E0.01654 ; perimeter
G1 X49.019 Y113.639 E0.01678 ; perimeter
G1 X49.308 Y113.919 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.54030 ; perimeter
G1 X97.128 Y137.952 E0.79005 ; perimeter
G1 X97.130 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X96.730 Y139.271 F10800.000 ; move inwards before travel
G1 F8640
G1 X93.839 Y139.236 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X83.445 Y140.278 ; move to first infill point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.654 Y140.069 E0.01484 ; infill
G1 X83.654 Y139.384 E0.03448 ; infill
G1 X82.961 Y140.077 E0.04931 ; infill
G1 X82.276 Y140.077 E0.03448 ; infill
G1 X83.292 Y139.061 E0.07230 ; infill
G1 X82.607 Y139.061 E0.03448 ; infill
G1 X81.591 Y140.077 E0.07230 ; infill
G1 X80.906 Y140.077 E0.03448 ; infill
G1 X81.922 Y139.061 E0.07230 ; infill
G1 X81.237 Y139.061 E0.03448 ; infill
G1 X80.221 Y140.077 E0.07230 ; infill
G1 X79.971 Y140.077 E0.01260 ; infill
G1 X79.971 Y139.642 E0.02188 ; infill
G1 X80.753 Y138.860 E0.05566 ; infill
G1 F8640
G1 X79.971 Y139.642 E-0.25530 ; wipe and retract
G1 X79.971 Y140.077 E-0.10036 ; wipe and retract
G1 X80.221 Y140.077 E-0.05779 ; wipe and retract
G1 X81.237 Y139.061 E-0.33164 ; wipe and retract
G1 X81.301 Y139.061 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X55.155 Y107.773 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X52.617 Y105.644 E0.13649 ; perimeter
G1 X50.168 Y108.562 E0.15696 ; perimeter
G1 X49.661 Y108.136 E0.02729 ; perimeter
G1 X58.658 Y97.414 E0.57663 ; perimeter
G1 X59.165 Y97.840 E0.02729 ; perimeter
G1 X56.716 Y100.758 E0.15696 ; perimeter
G1 X59.255 Y102.888 E0.13649 ; perimeter
G1 X58.910 Y103.298 E0.02205 ; perimeter
G1 X56.372 Y101.168 E0.13649 ; perimeter
G1 X52.961 Y105.234 E0.21861 ; perimeter
G1 X55.499 Y107.363 E0.13649 ; perimeter
G1 X55.194 Y107.727 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.204 Y108.332 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X52.666 Y106.202 E0.13649 ; perimeter
G1 X50.217 Y109.121 E0.15696 ; perimeter
G1 X49.102 Y108.185 E0.05995 ; perimeter
G1 X58.609 Y96.855 E0.60929 ; perimeter
G1 X59.724 Y97.791 E0.05995 ; perimeter
G1 X57.275 Y100.710 E0.15696 ; perimeter
G1 X59.813 Y102.839 E0.13649 ; perimeter
G1 X58.959 Y103.857 E0.05471 ; perimeter
G1 X56.421 Y101.727 E0.13649 ; perimeter
G1 X53.520 Y105.185 E0.18596 ; perimeter
G1 X56.058 Y107.314 E0.13649 ; perimeter
G1 X55.243 Y108.286 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.933 Y108.038 F10800.000 ; move inwards before travel
G1 F8640
G1 X52.683 Y106.216 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X91.075 Y116.030 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.24114 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X63.392 Y97.111 E0.97130 ; perimeter
G1 X63.032 Y96.850 E0.01834 ; perimeter
G1 X62.619 Y96.635 E0.01917 ; perimeter
G1 X62.183 Y96.484 E0.01903 ; perimeter
G1 X61.732 Y96.403 E0.01884 ; perimeter
G1 X61.280 Y96.398 E0.01864 ; perimeter
G1 X60.838 Y96.471 E0.01847 ; perimeter
G1 X60.420 Y96.626 E0.01834 ; perimeter
G1 X60.206 Y96.759 E0.01039 ; perimeter
G1 X59.648 Y96.291 E0.03002 ; perimeter
G1 X59.908 Y96.103 E0.01322 ; perimeter
G1 X60.228 Y95.940 E0.01479 ; perimeter
G1 X60.590 Y95.822 E0.01567 ; perimeter
G1 X60.959 Y95.759 E0.01544 ; perimeter
G1 X61.391 Y95.746 E0.01780 ; perimeter
G1 X61.642 Y95.765 E0.01037 ; perimeter
G1 X62.076 Y95.843 E0.01815 ; perimeter
G1 X62.505 Y95.975 E0.01850 ; perimeter
G1 X62.930 Y96.163 E0.01914 ; perimeter
G1 X63.333 Y96.400 E0.01927 ; perimeter
G1 X63.732 Y96.698 E0.02052 ; perimeter
G1 X81.649 Y111.732 E0.96349 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X91.419 Y115.619 E0.24916 ; perimeter
G1 X91.113 Y115.984 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X91.124 Y116.588 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.25152 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X63.148 Y97.424 E0.97666 ; perimeter
G1 X62.822 Y97.188 E0.01657 ; perimeter
G1 X62.462 Y97.000 E0.01678 ; perimeter
G1 X62.082 Y96.868 E0.01654 ; perimeter
G1 X61.695 Y96.799 E0.01621 ; perimeter
G1 X61.310 Y96.794 E0.01584 ; perimeter
G1 X60.940 Y96.856 E0.01546 ; perimeter
G1 X60.596 Y96.984 E0.01513 ; perimeter
G1 X60.289 Y97.175 E0.01489 ; perimeter
G1 X60.194 Y97.266 E0.00544 ; perimeter
G1 X59.062 Y96.316 E0.06089 ; perimeter
G1 X59.367 Y96.005 E0.01797 ; perimeter
G1 X59.701 Y95.763 E0.01697 ; perimeter
G1 X60.076 Y95.573 E0.01735 ; perimeter
G1 X60.491 Y95.438 E0.01796 ; perimeter
G1 X60.927 Y95.363 E0.01824 ; perimeter
G1 X61.400 Y95.349 E0.01949 ; perimeter
G1 X61.692 Y95.371 E0.01207 ; perimeter
G1 X62.170 Y95.457 E0.01999 ; perimeter
G1 X62.644 Y95.604 E0.02044 ; perimeter
G1 X63.109 Y95.809 E0.02096 ; perimeter
G1 X63.554 Y96.070 E0.02123 ; perimeter
G1 X63.978 Y96.387 E0.02184 ; perimeter
G1 X81.793 Y111.335 E0.95801 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X91.977 Y115.571 E0.27143 ; perimeter
G1 X91.162 Y116.542 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X90.835 Y116.311 F10800.000 ; move inwards before travel
G1 F8640
G1 X88.620 Y114.451 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X76.561 Y125.735 E0.09371 ; perimeter
G1 X76.905 Y125.325 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.09371 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X83.581 Y117.368 E0.09371 ; perimeter
G1 X83.925 Y116.958 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.09371 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X76.002 Y125.784 E0.09371 ; perimeter
G1 X76.856 Y124.766 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.09371 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X83.023 Y117.417 E0.09371 ; perimeter
G1 X83.877 Y116.400 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.09371 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X98.702 Y114.365 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.563 Y114.115 E0.04804 ; perimeter
G1 X97.563 Y113.603 E0.02109 ; perimeter
G1 X98.702 Y113.847 E0.04798 ; perimeter
G1 X98.702 Y114.305 E0.01887 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y114.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.166 Y114.434 E0.08141 ; perimeter
G1 X97.167 Y113.104 E0.05480 ; perimeter
G1 X97.984 Y113.294 E0.03456 ; perimeter
G1 X99.098 Y113.523 E0.04687 ; perimeter
G1 X99.098 Y114.789 E0.05213 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y115.329 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.703 Y115.176 E0.03321 ; perimeter
G1 X96.770 Y114.753 E0.08153 ; perimeter
G1 X96.771 Y112.604 E0.08851 ; perimeter
G1 X98.069 Y112.907 E0.05491 ; perimeter
G1 X99.494 Y113.200 E0.05996 ; perimeter
G1 X99.494 Y115.269 E0.08521 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.138 Y115.146 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.703 Y115.176 E-0.18405 ; wipe and retract
G1 X96.770 Y114.753 E-0.45696 ; wipe and retract
G1 X96.770 Y114.238 E-0.11899 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X150.728 Y114.365 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y113.847 E0.02134 ; perimeter
G1 X151.868 Y113.603 E0.04801 ; perimeter
G1 X151.868 Y114.115 E0.02110 ; perimeter
G1 X150.787 Y114.352 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y114.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.332 Y113.523 E0.05460 ; perimeter
G1 X151.446 Y113.294 E0.04687 ; perimeter
G1 X152.264 Y113.103 E0.03460 ; perimeter
G1 X152.264 Y114.434 E0.05481 ; perimeter
G1 X150.390 Y114.837 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y115.329 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.935 Y113.200 E0.08768 ; perimeter
G1 X151.361 Y112.907 E0.05996 ; perimeter
G1 X152.660 Y112.604 E0.05496 ; perimeter
G1 X152.660 Y114.753 E0.08852 ; perimeter
G1 X150.727 Y115.176 E0.08153 ; perimeter
G1 X149.994 Y115.317 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.111 Y114.969 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.935 Y113.200 E-0.48903 ; wipe and retract
G1 X151.085 Y112.964 E-0.27097 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X165.504 Y116.958 E0.09371 ; perimeter
G1 X165.848 Y117.368 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.09371 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X172.525 Y125.325 E0.09371 ; perimeter
G1 X172.869 Y125.735 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.09371 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X165.553 Y116.400 E0.09371 ; perimeter
G1 X166.407 Y117.417 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.09371 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X172.574 Y124.766 E0.09371 ; perimeter
G1 X173.427 Y125.784 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.09371 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X158.355 Y116.030 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X158.011 Y115.619 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.24916 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X185.697 Y96.698 E0.96349 ; perimeter
G1 X186.096 Y96.400 E0.02052 ; perimeter
G1 X186.500 Y96.163 E0.01927 ; perimeter
G1 X186.925 Y95.975 E0.01914 ; perimeter
G1 X187.354 Y95.843 E0.01850 ; perimeter
G1 X187.781 Y95.766 E0.01786 ; perimeter
G1 X188.205 Y95.744 E0.01750 ; perimeter
G1 X188.452 Y95.757 E0.01018 ; perimeter
G1 X188.855 Y95.826 E0.01687 ; perimeter
G1 X189.197 Y95.938 E0.01483 ; perimeter
G1 X189.522 Y96.103 E0.01499 ; perimeter
G1 X189.781 Y96.291 E0.01322 ; perimeter
G1 X189.223 Y96.759 E0.03002 ; perimeter
G1 X189.009 Y96.626 E0.01039 ; perimeter
G1 X188.592 Y96.471 E0.01834 ; perimeter
G1 X188.150 Y96.398 E0.01847 ; perimeter
G1 X187.697 Y96.403 E0.01864 ; perimeter
G1 X187.247 Y96.484 E0.01884 ; perimeter
G1 X186.810 Y96.635 E0.01903 ; perimeter
G1 X186.400 Y96.850 E0.01910 ; perimeter
G1 X186.084 Y97.075 E0.01597 ; perimeter
G1 X167.976 Y112.267 E0.97374 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X158.401 Y115.991 E0.23867 ; perimeter
M204 S1000 ; adjust acceleration
G1 X158.306 Y116.588 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X157.452 Y115.571 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.27143 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X185.451 Y96.387 E0.95801 ; perimeter
G1 X185.876 Y96.070 E0.02184 ; perimeter
G1 X186.320 Y95.809 E0.02123 ; perimeter
G1 X186.786 Y95.604 E0.02096 ; perimeter
G1 X187.260 Y95.457 E0.02044 ; perimeter
G1 X187.735 Y95.372 E0.01988 ; perimeter
G1 X188.205 Y95.347 E0.01939 ; perimeter
G1 X188.496 Y95.363 E0.01199 ; perimeter
G1 X189.077 Y95.478 E0.02442 ; perimeter
G1 X189.352 Y95.572 E0.01196 ; perimeter
G1 X189.729 Y95.763 E0.01742 ; perimeter
G1 X190.062 Y96.005 E0.01697 ; perimeter
G1 X190.368 Y96.316 E0.01797 ; perimeter
G1 X189.236 Y97.266 E0.06089 ; perimeter
G1 X189.141 Y97.175 E0.00544 ; perimeter
G1 X188.834 Y96.984 E0.01489 ; perimeter
G1 X188.489 Y96.856 E0.01513 ; perimeter
G1 X188.119 Y96.794 E0.01546 ; perimeter
G1 X187.735 Y96.799 E0.01584 ; perimeter
G1 X187.347 Y96.868 E0.01621 ; perimeter
G1 X186.968 Y97.000 E0.01654 ; perimeter
G1 X186.608 Y97.188 E0.01675 ; perimeter
G1 X186.327 Y97.389 E0.01420 ; perimeter
G1 X168.120 Y112.663 E0.97906 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X158.352 Y116.549 E0.24905 ; perimeter
M204 S1000 ; adjust acceleration
G1 X158.279 Y116.189 F10800.000 ; move inwards before travel
G1 F8640
G1 X157.452 Y115.571 E-0.30695 ; wipe and retract
G1 X158.955 Y114.309 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X194.274 Y107.773 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X193.930 Y107.363 E0.02205 ; perimeter
G1 X196.468 Y105.234 E0.13649 ; perimeter
G1 X193.057 Y101.168 E0.21861 ; perimeter
G1 X190.519 Y103.298 E0.13649 ; perimeter
G1 X190.175 Y102.888 E0.02205 ; perimeter
G1 X192.713 Y100.758 E0.13649 ; perimeter
G1 X190.264 Y97.840 E0.15696 ; perimeter
G1 X190.772 Y97.414 E0.02730 ; perimeter
G1 X199.769 Y108.136 E0.57663 ; perimeter
G1 X199.261 Y108.562 E0.02729 ; perimeter
G1 X196.812 Y105.644 E0.15696 ; perimeter
G1 X194.320 Y107.735 E0.13402 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.225 Y108.332 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X193.372 Y107.314 E0.05471 ; perimeter
G1 X195.910 Y105.185 E0.13649 ; perimeter
G1 X193.008 Y101.727 E0.18596 ; perimeter
G1 X190.470 Y103.857 E0.13649 ; perimeter
G1 X189.617 Y102.839 E0.05471 ; perimeter
G1 X192.155 Y100.710 E0.13649 ; perimeter
G1 X189.706 Y97.791 E0.15696 ; perimeter
G1 X190.821 Y96.855 E0.05995 ; perimeter
G1 X200.327 Y108.185 E0.60929 ; perimeter
G1 X199.213 Y109.121 E0.05995 ; perimeter
G1 X196.764 Y106.202 E0.15696 ; perimeter
G1 X194.271 Y108.293 E0.13402 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.270 Y107.934 F10800.000 ; move inwards before travel
G1 F8640
G1 X193.372 Y107.314 E-0.30695 ; wipe and retract
G1 X194.875 Y106.053 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 P77 R30
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.460 Y140.227 E-0.06470 ; wipe and retract
G1 X165.460 Y138.745 E-0.34214 ; wipe and retract
G1 X166.990 Y138.745 E-0.35316 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X152.696 Y138.884 ; move to first perimeter point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X152.697 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E0.77969 ; perimeter
G1 X200.388 Y114.213 E1.54683 ; perimeter
G1 X200.707 Y113.903 E0.01834 ; perimeter
G1 X200.991 Y113.535 E0.01917 ; perimeter
G1 X201.216 Y113.131 E0.01903 ; perimeter
G1 X201.374 Y112.702 E0.01884 ; perimeter
G1 X201.457 Y112.257 E0.01864 ; perimeter
G1 X201.462 Y111.809 E0.01847 ; perimeter
G1 X201.382 Y111.371 E0.01834 ; perimeter
G1 X201.216 Y110.960 E0.01826 ; perimeter
G1 X200.988 Y110.620 E0.01685 ; perimeter
G1 X200.223 Y109.709 E0.04901 ; perimeter
G1 X200.731 Y109.283 E0.02729 ; perimeter
G1 X201.621 Y110.344 E0.05706 ; perimeter
G1 X201.834 Y110.644 E0.01515 ; perimeter
G1 X201.986 Y110.957 E0.01434 ; perimeter
G1 X202.092 Y111.305 E0.01499 ; perimeter
G1 X202.143 Y111.662 E0.01483 ; perimeter
G1 X202.141 Y112.071 E0.01687 ; perimeter
G1 X202.111 Y112.316 E0.01018 ; perimeter
G1 X202.015 Y112.730 E0.01750 ; perimeter
G1 X201.865 Y113.137 E0.01786 ; perimeter
G1 X201.658 Y113.541 E0.01868 ; perimeter
G1 X201.405 Y113.918 E0.01872 ; perimeter
G1 X201.097 Y114.280 E0.01959 ; perimeter
G1 X200.736 Y114.620 E0.02043 ; perimeter
G1 X171.819 Y138.884 E1.55507 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.462 Y140.789 E0.17761 ; perimeter
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X152.756 Y138.884 E0.50701 ; perimeter
M204 S1000 ; adjust acceleration
G1 X152.299 Y139.280 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X152.302 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E0.79005 ; perimeter
G1 X200.122 Y113.919 E1.54030 ; perimeter
G1 X200.411 Y113.639 E0.01657 ; perimeter
G1 X200.659 Y113.316 E0.01678 ; perimeter
G1 X200.855 Y112.965 E0.01654 ; perimeter
G1 X200.990 Y112.596 E0.01621 ; perimeter
G1 X201.061 Y112.218 E0.01584 ; perimeter
G1 X201.065 Y111.843 E0.01546 ; perimeter
G1 X200.999 Y111.481 E0.01513 ; perimeter
G1 X200.864 Y111.146 E0.01489 ; perimeter
G1 X200.671 Y110.859 E0.01426 ; perimeter
G1 X199.665 Y109.660 E0.06447 ; perimeter
G1 X200.780 Y108.725 E0.05995 ; perimeter
G1 X201.935 Y110.102 E0.07406 ; perimeter
G1 X202.176 Y110.442 E0.01715 ; perimeter
G1 X202.356 Y110.812 E0.01697 ; perimeter
G1 X202.479 Y111.217 E0.01742 ; perimeter
G1 X202.539 Y111.641 E0.01766 ; perimeter
G1 X202.537 Y112.096 E0.01875 ; perimeter
G1 X202.502 Y112.385 E0.01199 ; perimeter
G1 X202.396 Y112.844 E0.01939 ; perimeter
G1 X202.229 Y113.297 E0.01988 ; perimeter
G1 X202.002 Y113.740 E0.02051 ; perimeter
G1 X201.720 Y114.159 E0.02081 ; perimeter
G1 X201.385 Y114.554 E0.02135 ; perimeter
G1 X200.999 Y114.916 E0.02181 ; perimeter
G1 X171.963 Y139.280 E1.56147 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X152.359 Y139.280 E0.50704 ; perimeter
M204 S1000 ; adjust acceleration
G1 X152.512 Y138.941 F10800.000 ; move inwards before travel
G1 F8640
G1 X152.302 Y137.952 E-0.30693 ; wipe and retract
G1 X154.264 Y137.952 E-0.45307 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
G1 X166.558 Y138.860 ; move to first infill point
G1 Z17.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.776 Y139.642 E0.05566 ; infill
G1 X165.776 Y140.077 E0.02188 ; infill
G1 X166.026 Y140.077 E0.01260 ; infill
G1 X167.042 Y139.061 E0.07230 ; infill
G1 X167.727 Y139.061 E0.03448 ; infill
G1 X166.711 Y140.077 E0.07230 ; infill
G1 X167.396 Y140.077 E0.03448 ; infill
G1 X168.412 Y139.061 E0.07230 ; infill
G1 X169.097 Y139.061 E0.03448 ; infill
G1 X168.081 Y140.077 E0.07230 ; infill
G1 X168.766 Y140.077 E0.03448 ; infill
G1 X169.459 Y139.384 E0.04931 ; infill
G1 X169.459 Y140.069 E0.03448 ; infill
G1 X169.250 Y140.278 E0.01484 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;17.25


G1 F8640
G1 X169.459 Y140.069 E-0.06809 ; wipe and retract
G1 X169.459 Y139.384 E-0.15815 ; wipe and retract
G1 X168.766 Y140.077 E-0.22616 ; wipe and retract
G1 X168.081 Y140.077 E-0.15815 ; wipe and retract
G1 X168.539 Y139.619 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;17.25
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.253 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X48.845 Y76.361 E1.56228 ; perimeter
G1 X48.485 Y76.023 E0.02037 ; perimeter
G1 X48.179 Y75.664 E0.01940 ; perimeter
G1 X47.922 Y75.281 E0.01899 ; perimeter
G1 X47.717 Y74.883 E0.01846 ; perimeter
G1 X47.567 Y74.477 E0.01782 ; perimeter
G1 X47.471 Y74.065 E0.01743 ; perimeter
G1 X47.440 Y73.806 E0.01076 ; perimeter
G1 X47.438 Y73.408 E0.01638 ; perimeter
G1 X47.491 Y73.039 E0.01537 ; perimeter
G1 X47.595 Y72.697 E0.01475 ; perimeter
G1 X47.747 Y72.385 E0.01429 ; perimeter
G1 X47.959 Y72.085 E0.01511 ; perimeter
G1 X48.850 Y71.024 E0.05706 ; perimeter
G1 X49.357 Y71.450 E0.02729 ; perimeter
G1 X48.592 Y72.362 E0.04901 ; perimeter
G1 X48.364 Y72.701 E0.01685 ; perimeter
G1 X48.199 Y73.112 E0.01826 ; perimeter
G1 X48.119 Y73.550 E0.01834 ; perimeter
G1 X48.123 Y73.998 E0.01847 ; perimeter
G1 X48.207 Y74.443 E0.01864 ; perimeter
G1 X48.365 Y74.872 E0.01884 ; perimeter
G1 X48.589 Y75.276 E0.01903 ; perimeter
G1 X48.874 Y75.645 E0.01917 ; perimeter
G1 X49.193 Y75.955 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.55404 ; perimeter
G1 X96.768 Y100.203 E0.76942 ; perimeter
G1 X96.766 Y100.738 E0.02205 ; perimeter
G1 X84.651 Y100.738 E0.49907 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.296 Y102.600 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X81.004 Y102.633 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X97.160 Y101.134 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X85.047 Y101.134 E0.49899 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.417 Y103.039 E0.03671 ; perimeter
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X48.582 Y76.658 E1.56868 ; perimeter
G1 X48.197 Y76.296 E0.02174 ; perimeter
G1 X47.863 Y75.904 E0.02124 ; perimeter
G1 X47.580 Y75.483 E0.02087 ; perimeter
G1 X47.354 Y75.043 E0.02039 ; perimeter
G1 X47.187 Y74.592 E0.01983 ; perimeter
G1 X47.080 Y74.134 E0.01934 ; perimeter
G1 X47.043 Y73.831 E0.01260 ; perimeter
G1 X47.042 Y73.381 E0.01854 ; perimeter
G1 X47.103 Y72.953 E0.01781 ; perimeter
G1 X47.225 Y72.551 E0.01729 ; perimeter
G1 X47.405 Y72.182 E0.01692 ; perimeter
G1 X47.645 Y71.843 E0.01711 ; perimeter
G1 X48.801 Y70.466 E0.07406 ; perimeter
G1 X49.916 Y71.401 E0.05995 ; perimeter
G1 X48.910 Y72.600 E0.06447 ; perimeter
G1 X48.717 Y72.887 E0.01426 ; perimeter
G1 X48.582 Y73.223 E0.01489 ; perimeter
G1 X48.516 Y73.584 E0.01513 ; perimeter
G1 X48.519 Y73.960 E0.01546 ; perimeter
G1 X48.591 Y74.337 E0.01584 ; perimeter
G1 X48.726 Y74.707 E0.01621 ; perimeter
G1 X48.921 Y75.058 E0.01654 ; perimeter
G1 X49.170 Y75.380 E0.01678 ; perimeter
G1 X49.459 Y75.660 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.54751 ; perimeter
G1 X97.166 Y99.806 E0.77988 ; perimeter
G1 X97.160 Y101.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X96.760 Y101.125 F10800.000 ; move inwards before travel
G1 F8640
G1 X93.869 Y101.091 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X84.140 Y101.697 ; move to first infill point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.358 Y100.915 E0.05567 ; infill
G1 X82.673 Y100.915 E0.03448 ; infill
G1 X83.688 Y101.931 E0.07230 ; infill
G1 X83.003 Y101.931 E0.03448 ; infill
G1 X81.988 Y100.915 E0.07230 ; infill
G1 X81.303 Y100.915 E0.03448 ; infill
G1 X82.318 Y101.931 E0.07230 ; infill
G1 X81.634 Y101.931 E0.03448 ; infill
G1 X80.618 Y100.915 E0.07230 ; infill
G1 X80.256 Y100.915 E0.01821 ; infill
G1 X80.256 Y101.238 E0.01627 ; infill
G1 X80.949 Y101.931 E0.04930 ; infill
G1 X80.264 Y101.931 E0.03448 ; infill
G1 X80.055 Y101.722 E0.01483 ; infill
G1 F8640
G1 X80.264 Y101.931 E-0.06804 ; wipe and retract
G1 X80.949 Y101.931 E-0.15815 ; wipe and retract
G1 X80.256 Y101.238 E-0.22612 ; wipe and retract
G1 X80.256 Y100.915 E-0.07462 ; wipe and retract
G1 X80.618 Y100.915 E-0.08353 ; wipe and retract
G1 X81.076 Y101.373 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X55.301 Y69.511 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X52.768 Y67.385 E0.13622 ; perimeter
G1 X50.319 Y70.304 E0.15696 ; perimeter
G1 X49.812 Y69.878 E0.02729 ; perimeter
G1 X58.809 Y59.155 E0.57663 ; perimeter
G1 X59.317 Y59.581 E0.02729 ; perimeter
G1 X56.868 Y62.500 E0.15696 ; perimeter
G1 X59.401 Y64.625 E0.13622 ; perimeter
G1 X59.057 Y65.035 E0.02205 ; perimeter
G1 X56.523 Y62.910 E0.13622 ; perimeter
G1 X53.112 Y66.975 E0.21861 ; perimeter
G1 X55.645 Y69.100 E0.13622 ; perimeter
G1 X55.340 Y69.465 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.350 Y70.069 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X52.817 Y67.943 E0.13622 ; perimeter
G1 X50.368 Y70.862 E0.15696 ; perimeter
G1 X49.253 Y69.927 E0.05995 ; perimeter
M73 Q77 S31
G1 X58.760 Y58.597 E0.60929 ; perimeter
G1 X59.875 Y59.532 E0.05995 ; perimeter
G1 X57.426 Y62.451 E0.15696 ; perimeter
G1 X59.959 Y64.576 E0.13622 ; perimeter
G1 X59.105 Y65.594 E0.05471 ; perimeter
G1 X56.572 Y63.468 E0.13622 ; perimeter
G1 X53.671 Y66.926 E0.18596 ; perimeter
G1 X56.204 Y69.052 E0.13622 ; perimeter
G1 X55.389 Y70.023 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.079 Y69.775 F10800.000 ; move inwards before travel
G1 F8640
G1 X52.829 Y67.953 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X91.168 Y77.723 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.23084 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X63.543 Y58.853 E0.97852 ; perimeter
G1 X63.183 Y58.592 E0.01834 ; perimeter
G1 X62.770 Y58.376 E0.01917 ; perimeter
G1 X62.334 Y58.225 E0.01903 ; perimeter
G1 X61.884 Y58.144 E0.01884 ; perimeter
G1 X61.431 Y58.139 E0.01864 ; perimeter
G1 X60.989 Y58.213 E0.01847 ; perimeter
G1 X60.571 Y58.367 E0.01834 ; perimeter
G1 X60.357 Y58.501 E0.01039 ; perimeter
G1 X59.799 Y58.032 E0.03002 ; perimeter
G1 X60.057 Y57.845 E0.01314 ; perimeter
G1 X60.376 Y57.683 E0.01475 ; perimeter
G1 X60.736 Y57.565 E0.01560 ; perimeter
G1 X60.979 Y57.519 E0.01018 ; perimeter
G1 X61.541 Y57.487 E0.02320 ; perimeter
G1 X61.800 Y57.507 E0.01067 ; perimeter
G1 X62.232 Y57.586 E0.01809 ; perimeter
G1 X62.660 Y57.718 E0.01846 ; perimeter
G1 X63.084 Y57.906 E0.01910 ; perimeter
G1 X63.486 Y58.142 E0.01921 ; perimeter
G1 X63.883 Y58.439 E0.02045 ; perimeter
G1 X81.934 Y73.586 E0.97071 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X91.512 Y77.313 E0.23886 ; perimeter
G1 X91.207 Y77.677 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X91.217 Y78.281 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.24122 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X63.299 Y59.166 E0.98387 ; perimeter
G1 X62.973 Y58.930 E0.01657 ; perimeter
G1 X62.613 Y58.741 E0.01678 ; perimeter
G1 X62.233 Y58.610 E0.01654 ; perimeter
G1 X61.846 Y58.540 E0.01621 ; perimeter
G1 X61.462 Y58.536 E0.01584 ; perimeter
G1 X61.091 Y58.597 E0.01546 ; perimeter
G1 X60.747 Y58.725 E0.01513 ; perimeter
G1 X60.440 Y58.916 E0.01489 ; perimeter
G1 X60.345 Y59.008 E0.00544 ; perimeter
G1 X59.213 Y58.058 E0.06089 ; perimeter
G1 X59.517 Y57.747 E0.01792 ; perimeter
G1 X59.850 Y57.506 E0.01692 ; perimeter
G1 X60.224 Y57.316 E0.01730 ; perimeter
G1 X60.637 Y57.180 E0.01790 ; perimeter
G1 X60.931 Y57.124 E0.01232 ; perimeter
G1 X61.545 Y57.090 E0.02536 ; perimeter
G1 X61.850 Y57.113 E0.01260 ; perimeter
G1 X62.326 Y57.200 E0.01993 ; perimeter
G1 X62.799 Y57.346 E0.02039 ; perimeter
G1 X63.263 Y57.552 E0.02091 ; perimeter
G1 X63.706 Y57.812 E0.02117 ; perimeter
G1 X64.130 Y58.129 E0.02177 ; perimeter
G1 X82.078 Y73.189 E0.96522 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X92.071 Y77.264 E0.26114 ; perimeter
G1 X91.256 Y78.235 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X90.929 Y78.003 F10800.000 ; move inwards before travel
G1 F8640
G1 X88.713 Y76.145 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.908 Y87.641 E0.09036 ; perimeter
G1 X77.252 Y87.231 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.09036 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X83.929 Y79.274 E0.09036 ; perimeter
G1 X84.273 Y78.864 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.09036 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X76.350 Y87.690 E0.09036 ; perimeter
G1 X77.204 Y86.672 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.09036 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X83.370 Y79.323 E0.09036 ; perimeter
G1 X84.224 Y78.306 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.09036 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X98.987 Y76.219 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.848 Y75.969 E0.04801 ; perimeter
G1 X97.849 Y75.457 E0.02108 ; perimeter
G1 X98.987 Y75.700 E0.04793 ; perimeter
G1 X98.987 Y76.159 E0.01888 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y76.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.452 Y76.288 E0.08139 ; perimeter
G1 X97.453 Y74.958 E0.05479 ; perimeter
G1 X98.242 Y75.142 E0.03335 ; perimeter
G1 X99.383 Y75.377 E0.04801 ; perimeter
G1 X99.383 Y76.643 E0.05214 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y77.183 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.988 Y77.030 E0.03321 ; perimeter
G1 X97.055 Y76.607 E0.08152 ; perimeter
G1 X97.058 Y74.459 E0.08849 ; perimeter
G1 X98.327 Y74.755 E0.05369 ; perimeter
G1 X99.780 Y75.054 E0.06110 ; perimeter
G1 X99.780 Y77.123 E0.08521 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.423 Y77.001 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.988 Y77.030 E-0.18405 ; wipe and retract
G1 X97.055 Y76.607 E-0.45693 ; wipe and retract
G1 X97.056 Y76.091 E-0.11902 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X151.013 Y76.219 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y75.700 E0.02135 ; perimeter
G1 X152.153 Y75.457 E0.04800 ; perimeter
G1 X152.153 Y75.969 E0.02109 ; perimeter
G1 X151.072 Y76.206 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y76.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.617 Y75.377 E0.05461 ; perimeter
G1 X151.758 Y75.142 E0.04801 ; perimeter
G1 X152.549 Y74.957 E0.03345 ; perimeter
G1 X152.549 Y76.288 E0.05480 ; perimeter
G1 X150.676 Y76.691 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y77.183 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.220 Y75.054 E0.08768 ; perimeter
G1 X151.673 Y74.755 E0.06110 ; perimeter
G1 X152.945 Y74.458 E0.05382 ; perimeter
G1 X152.945 Y76.607 E0.08852 ; perimeter
G1 X151.012 Y77.030 E0.08153 ; perimeter
G1 X150.279 Y77.171 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.396 Y76.823 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.220 Y75.054 E-0.48904 ; wipe and retract
G1 X151.370 Y74.817 E-0.27096 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X165.727 Y78.864 E0.09036 ; perimeter
G1 X166.071 Y79.274 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.09036 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X172.748 Y87.231 E0.09036 ; perimeter
G1 X173.092 Y87.641 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.09036 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X165.776 Y78.306 E0.09036 ; perimeter
G1 X166.630 Y79.323 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.09036 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X172.796 Y86.672 E0.09036 ; perimeter
G1 X173.650 Y87.690 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.09036 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X158.832 Y77.723 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X158.487 Y77.313 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.23886 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X186.117 Y58.439 E0.97071 ; perimeter
G1 X186.514 Y58.142 E0.02045 ; perimeter
G1 X186.916 Y57.906 E0.01921 ; perimeter
G1 X187.340 Y57.718 E0.01910 ; perimeter
G1 X187.768 Y57.586 E0.01846 ; perimeter
G1 X188.194 Y57.508 E0.01782 ; perimeter
G1 X188.616 Y57.485 E0.01743 ; perimeter
G1 X188.869 Y57.499 E0.01043 ; perimeter
G1 X189.392 Y57.603 E0.02198 ; perimeter
G1 X189.620 Y57.681 E0.00990 ; perimeter
G1 X189.943 Y57.845 E0.01493 ; perimeter
G1 X190.201 Y58.032 E0.01314 ; perimeter
G1 X189.643 Y58.501 E0.03002 ; perimeter
G1 X189.429 Y58.367 E0.01039 ; perimeter
G1 X189.011 Y58.213 E0.01834 ; perimeter
G1 X188.569 Y58.139 E0.01847 ; perimeter
G1 X188.116 Y58.144 E0.01864 ; perimeter
G1 X187.666 Y58.225 E0.01884 ; perimeter
G1 X187.230 Y58.376 E0.01903 ; perimeter
G1 X186.819 Y58.591 E0.01911 ; perimeter
G1 X186.500 Y58.819 E0.01616 ; perimeter
G1 X168.261 Y74.121 E0.98076 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X158.878 Y77.684 E0.22837 ; perimeter
M204 S1000 ; adjust acceleration
G1 X158.783 Y78.281 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X157.929 Y77.264 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.26114 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X185.870 Y58.129 E0.96522 ; perimeter
G1 X186.294 Y57.812 E0.02177 ; perimeter
G1 X186.737 Y57.552 E0.02117 ; perimeter
G1 X187.201 Y57.346 E0.02091 ; perimeter
G1 X187.674 Y57.200 E0.02039 ; perimeter
G1 X188.147 Y57.114 E0.01983 ; perimeter
G1 X188.616 Y57.088 E0.01934 ; perimeter
G1 X188.919 Y57.104 E0.01248 ; perimeter
G1 X189.496 Y57.219 E0.02424 ; perimeter
G1 X189.774 Y57.315 E0.01214 ; perimeter
G1 X190.150 Y57.506 E0.01736 ; perimeter
G1 X190.483 Y57.747 E0.01692 ; perimeter
G1 X190.787 Y58.058 E0.01792 ; perimeter
G1 X189.655 Y59.008 E0.06089 ; perimeter
G1 X189.560 Y58.916 E0.00544 ; perimeter
G1 X189.253 Y58.725 E0.01489 ; perimeter
G1 X188.909 Y58.597 E0.01513 ; perimeter
G1 X188.538 Y58.536 E0.01546 ; perimeter
G1 X188.154 Y58.540 E0.01584 ; perimeter
G1 X187.767 Y58.610 E0.01621 ; perimeter
G1 X187.387 Y58.741 E0.01654 ; perimeter
G1 X187.027 Y58.929 E0.01675 ; perimeter
G1 X186.743 Y59.133 E0.01439 ; perimeter
G1 X168.405 Y74.517 E0.98607 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X158.829 Y78.242 E0.23875 ; perimeter
M204 S1000 ; adjust acceleration
G1 X158.756 Y77.882 F10800.000 ; move inwards before travel
G1 F8640
G1 X157.929 Y77.264 E-0.30695 ; wipe and retract
G1 X159.432 Y76.003 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X194.699 Y69.511 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X194.355 Y69.100 E0.02205 ; perimeter
G1 X196.888 Y66.975 E0.13622 ; perimeter
G1 X193.477 Y62.910 E0.21861 ; perimeter
G1 X190.943 Y65.035 E0.13622 ; perimeter
G1 X190.599 Y64.625 E0.02205 ; perimeter
G1 X193.132 Y62.500 E0.13622 ; perimeter
G1 X190.683 Y59.581 E0.15696 ; perimeter
G1 X191.191 Y59.155 E0.02729 ; perimeter
G1 X200.188 Y69.878 E0.57663 ; perimeter
G1 X199.681 Y70.304 E0.02729 ; perimeter
G1 X197.232 Y67.385 E0.15696 ; perimeter
G1 X194.745 Y69.472 E0.13375 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.650 Y70.069 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X193.796 Y69.052 E0.05471 ; perimeter
G1 X196.329 Y66.926 E0.13622 ; perimeter
G1 X193.428 Y63.468 E0.18596 ; perimeter
G1 X190.895 Y65.594 E0.13622 ; perimeter
G1 X190.041 Y64.576 E0.05471 ; perimeter
G1 X192.574 Y62.451 E0.13622 ; perimeter
G1 X190.125 Y59.532 E0.15696 ; perimeter
G1 X191.240 Y58.597 E0.05995 ; perimeter
G1 X200.747 Y69.927 E0.60929 ; perimeter
G1 X199.632 Y70.862 E0.05995 ; perimeter
G1 X197.183 Y67.943 E0.15696 ; perimeter
G1 X194.696 Y70.030 E0.13375 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.694 Y69.671 F10800.000 ; move inwards before travel
G1 F8640
G1 X193.796 Y69.052 E-0.30695 ; wipe and retract
G1 X195.299 Y67.790 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.747 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X153.234 Y100.738 E0.49906 ; perimeter
G1 X153.232 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E0.76942 ; perimeter
G1 X200.807 Y75.955 E1.55404 ; perimeter
G1 X201.126 Y75.645 E0.01834 ; perimeter
G1 X201.411 Y75.276 E0.01917 ; perimeter
G1 X201.635 Y74.872 E0.01903 ; perimeter
G1 X201.793 Y74.443 E0.01884 ; perimeter
G1 X201.877 Y73.998 E0.01864 ; perimeter
G1 X201.881 Y73.550 E0.01847 ; perimeter
G1 X201.801 Y73.112 E0.01834 ; perimeter
G1 X201.636 Y72.701 E0.01826 ; perimeter
G1 X201.408 Y72.362 E0.01685 ; perimeter
G1 X200.643 Y71.450 E0.04901 ; perimeter
G1 X201.150 Y71.024 E0.02729 ; perimeter
G1 X202.041 Y72.085 E0.05706 ; perimeter
G1 X202.253 Y72.385 E0.01511 ; perimeter
G1 X202.405 Y72.697 E0.01429 ; perimeter
G1 X202.510 Y73.043 E0.01493 ; perimeter
G1 X202.548 Y73.281 E0.00990 ; perimeter
G1 X202.559 Y73.814 E0.02198 ; perimeter
G1 X202.529 Y74.065 E0.01043 ; perimeter
G1 X202.433 Y74.477 E0.01743 ; perimeter
G1 X202.283 Y74.883 E0.01782 ; perimeter
G1 X202.076 Y75.286 E0.01865 ; perimeter
G1 X201.823 Y75.662 E0.01867 ; perimeter
G1 X201.515 Y76.023 E0.01952 ; perimeter
G1 X201.155 Y76.361 E0.02037 ; perimeter
G1 X172.104 Y100.738 E1.56228 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.807 Y102.643 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.349 Y102.245 E-0.14011 ; wipe and retract
G1 X165.349 Y100.738 E-0.34797 ; wipe and retract
G1 X164.171 Y100.738 E-0.27192 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X152.840 Y101.134 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X152.834 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E0.77988 ; perimeter
G1 X200.541 Y75.660 E1.54751 ; perimeter
G1 X200.830 Y75.380 E0.01657 ; perimeter
G1 X201.079 Y75.058 E0.01678 ; perimeter
G1 X201.274 Y74.707 E0.01654 ; perimeter
G1 X201.409 Y74.337 E0.01621 ; perimeter
G1 X201.481 Y73.960 E0.01584 ; perimeter
G1 X201.484 Y73.584 E0.01546 ; perimeter
G1 X201.418 Y73.223 E0.01513 ; perimeter
G1 X201.283 Y72.887 E0.01489 ; perimeter
G1 X201.090 Y72.600 E0.01426 ; perimeter
G1 X200.084 Y71.401 E0.06447 ; perimeter
G1 X201.199 Y70.466 E0.05995 ; perimeter
G1 X202.355 Y71.843 E0.07406 ; perimeter
G1 X202.595 Y72.182 E0.01711 ; perimeter
G1 X202.775 Y72.551 E0.01692 ; perimeter
G1 X202.897 Y72.954 E0.01736 ; perimeter
G1 X202.943 Y73.245 E0.01214 ; perimeter
G1 X202.956 Y73.834 E0.02425 ; perimeter
G1 X202.920 Y74.134 E0.01248 ; perimeter
G1 X202.813 Y74.592 E0.01934 ; perimeter
G1 X202.646 Y75.043 E0.01983 ; perimeter
G1 X202.419 Y75.485 E0.02046 ; perimeter
G1 X202.138 Y75.903 E0.02075 ; perimeter
G1 X201.803 Y76.296 E0.02129 ; perimeter
G1 X201.418 Y76.658 E0.02174 ; perimeter
G1 X172.248 Y101.134 E1.56868 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.583 Y103.039 E0.19113 ; perimeter
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X152.900 Y101.134 E0.49652 ; perimeter
M204 S1000 ; adjust acceleration
G1 X153.051 Y100.794 F10800.000 ; move inwards before travel
G1 F8640
G1 X152.834 Y99.806 E-0.30702 ; wipe and retract
G1 X154.796 Y99.806 E-0.45298 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X165.860 Y101.722 ; move to first infill point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.069 Y101.931 E0.01484 ; infill
G1 X166.754 Y101.931 E0.03448 ; infill
G1 X166.061 Y101.238 E0.04930 ; infill
G1 X166.061 Y100.915 E0.01627 ; infill
G1 X166.423 Y100.915 E0.01821 ; infill
G1 X167.439 Y101.931 E0.07230 ; infill
G1 X168.124 Y101.931 E0.03448 ; infill
G1 X167.108 Y100.915 E0.07230 ; infill
G1 X167.793 Y100.915 E0.03448 ; infill
G1 X168.808 Y101.931 E0.07230 ; infill
G1 X169.493 Y101.931 E0.03448 ; infill
G1 X168.478 Y100.915 E0.07230 ; infill
G1 X169.163 Y100.915 E0.03448 ; infill
G1 X169.945 Y101.697 E0.05567 ; infill
G1 F8640
G1 X169.163 Y100.915 E-0.25535 ; wipe and retract
G1 X168.478 Y100.915 E-0.15815 ; wipe and retract
G1 X169.493 Y101.931 E-0.33164 ; wipe and retract
G1 X169.429 Y101.931 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.968 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X48.560 Y114.507 E1.56228 ; perimeter
G1 X48.199 Y114.169 E0.02037 ; perimeter
G1 X47.894 Y113.810 E0.01940 ; perimeter
G1 X47.637 Y113.428 E0.01899 ; perimeter
G1 X47.432 Y113.029 E0.01846 ; perimeter
G1 X47.282 Y112.624 E0.01782 ; perimeter
G1 X47.186 Y112.211 E0.01743 ; perimeter
G1 X47.154 Y111.952 E0.01076 ; perimeter
G1 X47.153 Y111.554 E0.01638 ; perimeter
G1 X47.206 Y111.185 E0.01537 ; perimeter
G1 X47.310 Y110.843 E0.01475 ; perimeter
G1 X47.462 Y110.531 E0.01429 ; perimeter
G1 X47.674 Y110.232 E0.01511 ; perimeter
G1 X48.564 Y109.170 E0.05706 ; perimeter
G1 X49.072 Y109.596 E0.02729 ; perimeter
G1 X48.307 Y110.508 E0.04901 ; perimeter
G1 X48.079 Y110.847 E0.01685 ; perimeter
G1 X47.914 Y111.258 E0.01826 ; perimeter
G1 X47.834 Y111.696 E0.01834 ; perimeter
G1 X47.838 Y112.145 E0.01847 ; perimeter
G1 X47.922 Y112.589 E0.01864 ; perimeter
G1 X48.080 Y113.019 E0.01884 ; perimeter
G1 X48.304 Y113.422 E0.01903 ; perimeter
G1 X48.588 Y113.791 E0.01917 ; perimeter
G1 X48.908 Y114.101 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.55404 ; perimeter
G1 X96.483 Y138.349 E0.76942 ; perimeter
G1 X96.480 Y138.884 E0.02205 ; perimeter
G1 X84.366 Y138.884 E0.49907 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X84.010 Y140.747 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.719 Y140.779 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X96.875 Y139.280 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X84.762 Y139.280 E0.49899 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.132 Y141.185 E0.03671 ; perimeter
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X48.297 Y114.804 E1.56868 ; perimeter
G1 X47.912 Y114.443 E0.02174 ; perimeter
G1 X47.578 Y114.050 E0.02124 ; perimeter
G1 X47.295 Y113.629 E0.02087 ; perimeter
G1 X47.069 Y113.189 E0.02039 ; perimeter
G1 X46.902 Y112.738 E0.01983 ; perimeter
G1 X46.795 Y112.281 E0.01934 ; perimeter
G1 X46.758 Y111.977 E0.01260 ; perimeter
G1 X46.756 Y111.527 E0.01854 ; perimeter
G1 X46.818 Y111.099 E0.01781 ; perimeter
G1 X46.940 Y110.697 E0.01729 ; perimeter
G1 X47.120 Y110.328 E0.01692 ; perimeter
G1 X47.360 Y109.989 E0.01711 ; perimeter
G1 X48.516 Y108.612 E0.07406 ; perimeter
G1 X49.630 Y109.547 E0.05995 ; perimeter
G1 X48.624 Y110.746 E0.06447 ; perimeter
G1 X48.431 Y111.034 E0.01426 ; perimeter
G1 X48.297 Y111.369 E0.01489 ; perimeter
G1 X48.231 Y111.730 E0.01513 ; perimeter
G1 X48.234 Y112.106 E0.01546 ; perimeter
G1 X48.305 Y112.484 E0.01584 ; perimeter
G1 X48.441 Y112.853 E0.01621 ; perimeter
G1 X48.636 Y113.204 E0.01654 ; perimeter
G1 X48.885 Y113.526 E0.01678 ; perimeter
G1 X49.174 Y113.806 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.54751 ; perimeter
G1 X96.881 Y137.952 E0.77988 ; perimeter
G1 X96.875 Y139.220 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X96.475 Y139.271 F10800.000 ; move inwards before travel
G1 F8640
G1 X93.584 Y139.237 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X83.854 Y139.843 ; move to first infill point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.072 Y139.061 E0.05567 ; infill
G1 X82.388 Y139.061 E0.03448 ; infill
G1 X83.403 Y140.077 E0.07230 ; infill
G1 X82.718 Y140.077 E0.03448 ; infill
G1 X81.703 Y139.061 E0.07230 ; infill
G1 X81.018 Y139.061 E0.03448 ; infill
G1 X82.033 Y140.077 E0.07230 ; infill
G1 X81.348 Y140.077 E0.03448 ; infill
G1 X80.333 Y139.061 E0.07230 ; infill
G1 X79.971 Y139.061 E0.01821 ; infill
G1 X79.971 Y139.384 E0.01627 ; infill
G1 X80.663 Y140.077 E0.04930 ; infill
G1 X79.978 Y140.077 E0.03448 ; infill
G1 X79.770 Y139.868 E0.01483 ; infill
G1 F8640
G1 X79.978 Y140.077 E-0.06804 ; wipe and retract
G1 X80.663 Y140.077 E-0.15815 ; wipe and retract
G1 X79.971 Y139.384 E-0.22612 ; wipe and retract
G1 X79.971 Y139.061 E-0.07462 ; wipe and retract
G1 X80.333 Y139.061 E-0.08353 ; wipe and retract
G1 X80.791 Y139.519 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X55.016 Y107.657 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X52.483 Y105.531 E0.13622 ; perimeter
G1 X50.034 Y108.450 E0.15696 ; perimeter
G1 X49.527 Y108.024 E0.02729 ; perimeter
G1 X58.524 Y97.301 E0.57663 ; perimeter
G1 X59.031 Y97.727 E0.02729 ; perimeter
G1 X56.582 Y100.646 E0.15696 ; perimeter
G1 X59.115 Y102.771 E0.13622 ; perimeter
G1 X58.771 Y103.181 E0.02205 ; perimeter
G1 X56.238 Y101.056 E0.13622 ; perimeter
G1 X52.827 Y105.121 E0.21861 ; perimeter
G1 X55.360 Y107.247 E0.13622 ; perimeter
G1 X55.055 Y107.611 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.065 Y108.215 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X52.532 Y106.090 E0.13622 ; perimeter
G1 X50.083 Y109.008 E0.15696 ; perimeter
G1 X48.968 Y108.073 E0.05995 ; perimeter
G1 X58.475 Y96.743 E0.60929 ; perimeter
G1 X59.590 Y97.678 E0.05995 ; perimeter
G1 X57.141 Y100.597 E0.15696 ; perimeter
G1 X59.674 Y102.722 E0.13622 ; perimeter
G1 X58.820 Y103.740 E0.05471 ; perimeter
G1 X56.287 Y101.614 E0.13622 ; perimeter
G1 X53.386 Y105.072 E0.18596 ; perimeter
G1 X55.919 Y107.198 E0.13622 ; perimeter
G1 X55.104 Y108.169 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.794 Y107.921 F10800.000 ; move inwards before travel
G1 F8640
G1 X52.544 Y106.099 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X90.883 Y115.869 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 P78 R29
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.23084 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X63.258 Y96.999 E0.97852 ; perimeter
G1 X62.897 Y96.738 E0.01834 ; perimeter
G1 X62.485 Y96.522 E0.01917 ; perimeter
G1 X62.049 Y96.371 E0.01903 ; perimeter
G1 X61.598 Y96.290 E0.01884 ; perimeter
G1 X61.146 Y96.285 E0.01864 ; perimeter
G1 X60.704 Y96.359 E0.01847 ; perimeter
G1 X60.286 Y96.514 E0.01834 ; perimeter
G1 X60.072 Y96.647 E0.01039 ; perimeter
G1 X59.514 Y96.178 E0.03002 ; perimeter
G1 X59.772 Y95.991 E0.01314 ; perimeter
G1 X60.091 Y95.829 E0.01475 ; perimeter
G1 X60.451 Y95.711 E0.01560 ; perimeter
G1 X60.694 Y95.665 E0.01018 ; perimeter
G1 X61.256 Y95.634 E0.02320 ; perimeter
G1 X61.515 Y95.653 E0.01067 ; perimeter
G1 X61.947 Y95.732 E0.01809 ; perimeter
G1 X62.374 Y95.864 E0.01846 ; perimeter
G1 X62.798 Y96.052 E0.01910 ; perimeter
G1 X63.201 Y96.288 E0.01921 ; perimeter
G1 X63.598 Y96.586 E0.02045 ; perimeter
G1 X81.649 Y111.732 E0.97071 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X91.227 Y115.459 E0.23886 ; perimeter
G1 X90.922 Y115.823 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X90.932 Y116.427 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.24122 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X63.014 Y97.312 E0.98387 ; perimeter
G1 X62.688 Y97.076 E0.01657 ; perimeter
G1 X62.327 Y96.887 E0.01678 ; perimeter
G1 X61.948 Y96.756 E0.01654 ; perimeter
G1 X61.561 Y96.686 E0.01621 ; perimeter
G1 X61.176 Y96.682 E0.01584 ; perimeter
G1 X60.806 Y96.744 E0.01546 ; perimeter
G1 X60.462 Y96.871 E0.01513 ; perimeter
G1 X60.155 Y97.062 E0.01489 ; perimeter
G1 X60.060 Y97.154 E0.00544 ; perimeter
G1 X58.928 Y96.204 E0.06089 ; perimeter
G1 X59.232 Y95.893 E0.01792 ; perimeter
G1 X59.565 Y95.652 E0.01692 ; perimeter
G1 X59.939 Y95.462 E0.01730 ; perimeter
G1 X60.352 Y95.326 E0.01790 ; perimeter
G1 X60.646 Y95.270 E0.01232 ; perimeter
G1 X61.260 Y95.236 E0.02536 ; perimeter
G1 X61.565 Y95.259 E0.01260 ; perimeter
G1 X62.041 Y95.346 E0.01993 ; perimeter
G1 X62.514 Y95.493 E0.02039 ; perimeter
G1 X62.978 Y95.698 E0.02091 ; perimeter
G1 X63.421 Y95.958 E0.02117 ; perimeter
G1 X63.844 Y96.275 E0.02177 ; perimeter
G1 X81.793 Y111.335 E0.96522 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X91.786 Y115.410 E0.26114 ; perimeter
G1 X90.971 Y116.381 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X90.644 Y116.150 F10800.000 ; move inwards before travel
G1 F8640
G1 X88.428 Y114.292 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X76.623 Y125.787 E0.09036 ; perimeter
G1 X76.967 Y125.377 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.09036 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X83.644 Y117.420 E0.09036 ; perimeter
G1 X83.988 Y117.010 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.09036 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X76.065 Y125.836 E0.09036 ; perimeter
G1 X76.918 Y124.819 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.09036 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X83.085 Y117.469 E0.09036 ; perimeter
G1 X83.939 Y116.452 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.09036 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X98.702 Y114.365 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.563 Y114.115 E0.04801 ; perimeter
G1 X97.564 Y113.604 E0.02108 ; perimeter
G1 X98.702 Y113.846 E0.04793 ; perimeter
G1 X98.702 Y114.305 E0.01888 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y114.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.166 Y114.434 E0.08139 ; perimeter
G1 X97.168 Y113.104 E0.05479 ; perimeter
G1 X97.957 Y113.288 E0.03335 ; perimeter
G1 X99.098 Y113.523 E0.04801 ; perimeter
G1 X99.098 Y114.789 E0.05214 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y115.329 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.703 Y115.176 E0.03321 ; perimeter
G1 X96.770 Y114.753 E0.08152 ; perimeter
G1 X96.773 Y112.605 E0.08849 ; perimeter
G1 X98.042 Y112.901 E0.05369 ; perimeter
G1 X99.494 Y113.200 E0.06110 ; perimeter
G1 X99.494 Y115.269 E0.08521 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.138 Y115.147 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.703 Y115.176 E-0.18405 ; wipe and retract
G1 X96.770 Y114.753 E-0.45693 ; wipe and retract
G1 X96.770 Y114.237 E-0.11902 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X150.728 Y114.365 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y113.846 E0.02135 ; perimeter
G1 X151.868 Y113.603 E0.04800 ; perimeter
G1 X151.868 Y114.115 E0.02109 ; perimeter
G1 X150.787 Y114.352 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y114.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.332 Y113.523 E0.05461 ; perimeter
G1 X151.473 Y113.288 E0.04801 ; perimeter
G1 X152.264 Y113.104 E0.03345 ; perimeter
G1 X152.264 Y114.434 E0.05480 ; perimeter
G1 X150.390 Y114.837 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y115.329 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.935 Y113.200 E0.08768 ; perimeter
G1 X151.388 Y112.901 E0.06110 ; perimeter
G1 X152.660 Y112.604 E0.05382 ; perimeter
G1 X152.660 Y114.753 E0.08852 ; perimeter
G1 X150.727 Y115.176 E0.08153 ; perimeter
G1 X149.994 Y115.317 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.111 Y114.969 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.935 Y113.200 E-0.48904 ; wipe and retract
G1 X151.085 Y112.964 E-0.27096 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X165.442 Y117.010 E0.09036 ; perimeter
G1 X165.786 Y117.420 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.09036 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X172.462 Y125.377 E0.09036 ; perimeter
G1 X172.807 Y125.787 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.09036 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X165.491 Y116.452 E0.09036 ; perimeter
G1 X166.344 Y117.469 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.09036 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X172.511 Y124.819 E0.09036 ; perimeter
G1 X173.365 Y125.836 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.09036 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X158.546 Y115.869 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X158.202 Y115.459 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.23886 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X185.832 Y96.586 E0.97071 ; perimeter
G1 X186.229 Y96.288 E0.02045 ; perimeter
G1 X186.631 Y96.052 E0.01921 ; perimeter
G1 X187.055 Y95.864 E0.01910 ; perimeter
G1 X187.483 Y95.732 E0.01846 ; perimeter
G1 X187.909 Y95.654 E0.01782 ; perimeter
G1 X188.331 Y95.631 E0.01743 ; perimeter
G1 X188.584 Y95.645 E0.01043 ; perimeter
G1 X189.107 Y95.749 E0.02198 ; perimeter
G1 X189.334 Y95.827 E0.00990 ; perimeter
G1 X189.658 Y95.991 E0.01493 ; perimeter
G1 X189.916 Y96.178 E0.01314 ; perimeter
G1 X189.357 Y96.647 E0.03002 ; perimeter
G1 X189.143 Y96.514 E0.01039 ; perimeter
G1 X188.726 Y96.359 E0.01834 ; perimeter
G1 X188.284 Y96.285 E0.01847 ; perimeter
G1 X187.831 Y96.290 E0.01864 ; perimeter
G1 X187.381 Y96.371 E0.01884 ; perimeter
G1 X186.945 Y96.522 E0.01903 ; perimeter
G1 X186.534 Y96.737 E0.01911 ; perimeter
G1 X186.215 Y96.966 E0.01616 ; perimeter
G1 X167.976 Y112.267 E0.98076 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X158.592 Y115.830 E0.22837 ; perimeter
M204 S1000 ; adjust acceleration
G1 X158.498 Y116.427 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X157.644 Y115.410 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.26114 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X185.585 Y96.275 E0.96522 ; perimeter
G1 X186.008 Y95.958 E0.02177 ; perimeter
G1 X186.452 Y95.698 E0.02117 ; perimeter
G1 X186.916 Y95.493 E0.02091 ; perimeter
G1 X187.389 Y95.346 E0.02039 ; perimeter
G1 X187.862 Y95.260 E0.01983 ; perimeter
G1 X188.331 Y95.234 E0.01934 ; perimeter
G1 X188.633 Y95.250 E0.01248 ; perimeter
G1 X189.211 Y95.365 E0.02424 ; perimeter
G1 X189.489 Y95.461 E0.01214 ; perimeter
G1 X189.865 Y95.652 E0.01736 ; perimeter
G1 X190.197 Y95.893 E0.01692 ; perimeter
G1 X190.502 Y96.204 E0.01792 ; perimeter
G1 X189.370 Y97.154 E0.06089 ; perimeter
G1 X189.275 Y97.062 E0.00544 ; perimeter
G1 X188.968 Y96.871 E0.01489 ; perimeter
G1 X188.624 Y96.744 E0.01513 ; perimeter
G1 X188.253 Y96.682 E0.01546 ; perimeter
G1 X187.869 Y96.686 E0.01584 ; perimeter
G1 X187.481 Y96.756 E0.01621 ; perimeter
G1 X187.102 Y96.887 E0.01654 ; perimeter
G1 X186.742 Y97.076 E0.01675 ; perimeter
G1 X186.458 Y97.279 E0.01439 ; perimeter
G1 X168.120 Y112.663 E0.98607 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X158.544 Y116.389 E0.23875 ; perimeter
M73 Q78 S30
M204 S1000 ; adjust acceleration
G1 X158.471 Y116.028 F10800.000 ; move inwards before travel
G1 F8640
G1 X157.644 Y115.410 E-0.30695 ; wipe and retract
G1 X159.147 Y114.149 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X194.413 Y107.657 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X194.069 Y107.247 E0.02205 ; perimeter
G1 X196.602 Y105.121 E0.13622 ; perimeter
G1 X193.191 Y101.056 E0.21861 ; perimeter
G1 X190.658 Y103.181 E0.13622 ; perimeter
G1 X190.314 Y102.771 E0.02205 ; perimeter
G1 X192.847 Y100.646 E0.13622 ; perimeter
G1 X190.398 Y97.727 E0.15696 ; perimeter
G1 X190.906 Y97.301 E0.02729 ; perimeter
G1 X199.903 Y108.024 E0.57663 ; perimeter
G1 X199.396 Y108.450 E0.02729 ; perimeter
G1 X196.947 Y105.531 E0.15696 ; perimeter
G1 X194.459 Y107.618 E0.13375 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.365 Y108.215 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X193.511 Y107.198 E0.05471 ; perimeter
G1 X196.044 Y105.072 E0.13622 ; perimeter
G1 X193.142 Y101.614 E0.18596 ; perimeter
G1 X190.609 Y103.740 E0.13622 ; perimeter
G1 X189.756 Y102.722 E0.05471 ; perimeter
G1 X192.289 Y100.597 E0.13622 ; perimeter
G1 X189.840 Y97.678 E0.15696 ; perimeter
G1 X190.955 Y96.743 E0.05995 ; perimeter
G1 X200.461 Y108.073 E0.60929 ; perimeter
G1 X199.347 Y109.008 E0.05995 ; perimeter
G1 X196.898 Y106.090 E0.15696 ; perimeter
G1 X194.411 Y108.176 E0.13375 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.409 Y107.817 F10800.000 ; move inwards before travel
G1 F8640
G1 X193.511 Y107.198 E-0.30695 ; wipe and retract
G1 X195.014 Y105.937 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.462 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X152.949 Y138.884 E0.49906 ; perimeter
G1 X152.947 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E0.76942 ; perimeter
G1 X200.522 Y114.101 E1.55404 ; perimeter
G1 X200.841 Y113.791 E0.01834 ; perimeter
G1 X201.125 Y113.422 E0.01917 ; perimeter
G1 X201.350 Y113.019 E0.01903 ; perimeter
G1 X201.508 Y112.589 E0.01884 ; perimeter
G1 X201.592 Y112.145 E0.01864 ; perimeter
G1 X201.596 Y111.696 E0.01847 ; perimeter
G1 X201.516 Y111.258 E0.01834 ; perimeter
G1 X201.350 Y110.847 E0.01826 ; perimeter
G1 X201.122 Y110.508 E0.01685 ; perimeter
G1 X200.358 Y109.596 E0.04901 ; perimeter
G1 X200.865 Y109.170 E0.02729 ; perimeter
G1 X201.756 Y110.232 E0.05706 ; perimeter
G1 X201.968 Y110.531 E0.01511 ; perimeter
G1 X202.120 Y110.843 E0.01429 ; perimeter
G1 X202.225 Y111.189 E0.01493 ; perimeter
G1 X202.262 Y111.427 E0.00990 ; perimeter
G1 X202.274 Y111.960 E0.02198 ; perimeter
G1 X202.244 Y112.211 E0.01043 ; perimeter
G1 X202.148 Y112.624 E0.01743 ; perimeter
G1 X201.997 Y113.029 E0.01782 ; perimeter
G1 X201.790 Y113.432 E0.01865 ; perimeter
G1 X201.537 Y113.808 E0.01867 ; perimeter
G1 X201.230 Y114.169 E0.01952 ; perimeter
G1 X200.870 Y114.507 E0.02037 ; perimeter
G1 X171.819 Y138.884 E1.56228 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.522 Y140.789 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.064 Y140.391 E-0.14011 ; wipe and retract
G1 X165.064 Y138.884 E-0.34797 ; wipe and retract
G1 X163.886 Y138.884 E-0.27192 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X152.555 Y139.280 ; move to first perimeter point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X152.549 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E0.77988 ; perimeter
G1 X200.256 Y113.806 E1.54751 ; perimeter
G1 X200.545 Y113.526 E0.01657 ; perimeter
G1 X200.793 Y113.204 E0.01678 ; perimeter
G1 X200.989 Y112.853 E0.01654 ; perimeter
G1 X201.124 Y112.484 E0.01621 ; perimeter
G1 X201.196 Y112.106 E0.01584 ; perimeter
G1 X201.199 Y111.730 E0.01546 ; perimeter
G1 X201.133 Y111.369 E0.01513 ; perimeter
G1 X200.998 Y111.034 E0.01489 ; perimeter
G1 X200.805 Y110.746 E0.01426 ; perimeter
G1 X199.799 Y109.547 E0.06447 ; perimeter
G1 X200.914 Y108.612 E0.05995 ; perimeter
G1 X202.070 Y109.989 E0.07406 ; perimeter
G1 X202.310 Y110.328 E0.01711 ; perimeter
G1 X202.490 Y110.697 E0.01692 ; perimeter
G1 X202.612 Y111.100 E0.01736 ; perimeter
G1 X202.658 Y111.391 E0.01214 ; perimeter
G1 X202.671 Y111.980 E0.02425 ; perimeter
G1 X202.634 Y112.281 E0.01248 ; perimeter
G1 X202.528 Y112.738 E0.01934 ; perimeter
G1 X202.361 Y113.189 E0.01983 ; perimeter
G1 X202.134 Y113.631 E0.02046 ; perimeter
G1 X201.853 Y114.049 E0.02075 ; perimeter
G1 X201.518 Y114.443 E0.02129 ; perimeter
G1 X201.133 Y114.804 E0.02174 ; perimeter
G1 X171.963 Y139.280 E1.56868 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.298 Y141.185 E0.19113 ; perimeter
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X152.615 Y139.280 E0.49652 ; perimeter
M204 S1000 ; adjust acceleration
G1 X152.766 Y138.941 F10800.000 ; move inwards before travel
G1 F8640
G1 X152.549 Y137.952 E-0.30702 ; wipe and retract
G1 X154.510 Y137.952 E-0.45298 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
G1 X165.575 Y139.868 ; move to first infill point
G1 Z17.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.784 Y140.077 E0.01484 ; infill
G1 X166.469 Y140.077 E0.03448 ; infill
G1 X165.776 Y139.384 E0.04930 ; infill
G1 X165.776 Y139.061 E0.01627 ; infill
G1 X166.138 Y139.061 E0.01821 ; infill
G1 X167.153 Y140.077 E0.07230 ; infill
G1 X167.838 Y140.077 E0.03448 ; infill
G1 X166.823 Y139.061 E0.07230 ; infill
G1 X167.508 Y139.061 E0.03448 ; infill
G1 X168.523 Y140.077 E0.07230 ; infill
G1 X169.208 Y140.077 E0.03448 ; infill
G1 X168.193 Y139.061 E0.07230 ; infill
G1 X168.878 Y139.061 E0.03448 ; infill
G1 X169.660 Y139.843 E0.05567 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;17.5


G1 F8640
G1 X168.878 Y139.061 E-0.25535 ; wipe and retract
G1 X168.193 Y139.061 E-0.15815 ; wipe and retract
G1 X169.208 Y140.077 E-0.33164 ; wipe and retract
G1 X169.144 Y140.077 E-0.01486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z17.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;17.5
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.253 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X48.711 Y76.249 E1.56950 ; perimeter
G1 X48.351 Y75.911 E0.02031 ; perimeter
G1 X48.047 Y75.554 E0.01934 ; perimeter
G1 X47.790 Y75.172 E0.01894 ; perimeter
G1 X47.585 Y74.775 E0.01841 ; perimeter
G1 X47.435 Y74.371 E0.01778 ; perimeter
G1 X47.338 Y73.960 E0.01736 ; perimeter
G1 X47.305 Y73.687 E0.01134 ; perimeter
G1 X47.304 Y73.292 E0.01630 ; perimeter
G1 X47.358 Y72.924 E0.01532 ; perimeter
G1 X47.462 Y72.582 E0.01470 ; perimeter
G1 X47.614 Y72.271 E0.01425 ; perimeter
G1 X47.825 Y71.973 E0.01507 ; perimeter
G1 X48.716 Y70.912 E0.05707 ; perimeter
G1 X49.223 Y71.338 E0.02729 ; perimeter
G1 X48.458 Y72.249 E0.04901 ; perimeter
G1 X48.230 Y72.589 E0.01685 ; perimeter
G1 X48.065 Y73.000 E0.01826 ; perimeter
G1 X47.985 Y73.438 E0.01834 ; perimeter
G1 X47.989 Y73.886 E0.01847 ; perimeter
G1 X48.073 Y74.331 E0.01864 ; perimeter
G1 X48.231 Y74.760 E0.01884 ; perimeter
G1 X48.455 Y75.164 E0.01903 ; perimeter
G1 X48.739 Y75.532 E0.01917 ; perimeter
G1 X49.059 Y75.842 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.56125 ; perimeter
G1 X96.525 Y100.203 E0.75939 ; perimeter
G1 X96.524 Y100.738 E0.02205 ; perimeter
G1 X84.651 Y100.738 E0.48911 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.296 Y102.600 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.417 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X48.448 Y76.545 E1.57589 ; perimeter
G1 X48.064 Y76.185 E0.02168 ; perimeter
G1 X47.731 Y75.794 E0.02118 ; perimeter
G1 X47.449 Y75.375 E0.02081 ; perimeter
G1 X47.222 Y74.936 E0.02034 ; perimeter
G1 X47.055 Y74.486 E0.01979 ; perimeter
G1 X46.947 Y74.030 E0.01928 ; perimeter
G1 X46.909 Y73.712 E0.01321 ; perimeter
G1 X46.908 Y73.263 E0.01847 ; perimeter
G1 X46.970 Y72.837 E0.01776 ; perimeter
G1 X47.092 Y72.436 E0.01724 ; perimeter
G1 X47.272 Y72.068 E0.01687 ; perimeter
G1 X47.511 Y71.731 E0.01706 ; perimeter
G1 X48.667 Y70.353 E0.07406 ; perimeter
G1 X49.782 Y71.289 E0.05995 ; perimeter
G1 X48.776 Y72.488 E0.06447 ; perimeter
G1 X48.582 Y72.775 E0.01426 ; perimeter
G1 X48.448 Y73.110 E0.01489 ; perimeter
G1 X48.382 Y73.472 E0.01513 ; perimeter
G1 X48.385 Y73.847 E0.01546 ; perimeter
G1 X48.456 Y74.225 E0.01584 ; perimeter
G1 X48.592 Y74.594 E0.01621 ; perimeter
G1 X48.787 Y74.945 E0.01654 ; perimeter
G1 X49.036 Y75.268 E0.01678 ; perimeter
G1 X49.325 Y75.548 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.55472 ; perimeter
G1 X96.922 Y99.806 E0.76980 ; perimeter
G1 X96.920 Y101.134 E0.05471 ; perimeter
G1 X85.047 Y101.134 E0.48908 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.460 Y102.997 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.094 Y102.804 F10800.000 ; move inwards before travel
G1 F8640
G1 X81.168 Y103.027 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
G1 X83.730 Y102.131 ; move to first infill point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.939 Y101.923 E0.01484 ; infill
G1 X83.939 Y101.238 E0.03448 ; infill
G1 X83.246 Y101.931 E0.04931 ; infill
G1 X82.561 Y101.931 E0.03448 ; infill
G1 X83.577 Y100.915 E0.07230 ; infill
G1 X82.892 Y100.915 E0.03448 ; infill
G1 X81.876 Y101.931 E0.07230 ; infill
G1 X81.191 Y101.931 E0.03448 ; infill
G1 X82.207 Y100.915 E0.07230 ; infill
G1 X81.522 Y100.915 E0.03448 ; infill
G1 X80.506 Y101.931 E0.07230 ; infill
G1 X80.256 Y101.931 E0.01260 ; infill
G1 X80.256 Y101.496 E0.02188 ; infill
G1 X81.038 Y100.714 E0.05566 ; infill
G1 F8640
G1 X80.256 Y101.496 E-0.25531 ; wipe and retract
G1 X80.256 Y101.931 E-0.10036 ; wipe and retract
G1 X80.506 Y101.931 E-0.05779 ; wipe and retract
G1 X81.522 Y100.915 E-0.33164 ; wipe and retract
G1 X81.587 Y100.915 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
G1 X55.162 Y69.394 ; move to first perimeter point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X52.634 Y67.272 E0.13595 ; perimeter
G1 X50.185 Y70.191 E0.15696 ; perimeter
G1 X49.678 Y69.765 E0.02729 ; perimeter
G1 X58.675 Y59.043 E0.57663 ; perimeter
G1 X59.182 Y59.469 E0.02729 ; perimeter
G1 X56.733 Y62.387 E0.15696 ; perimeter
G1 X59.261 Y64.508 E0.13595 ; perimeter
G1 X58.917 Y64.919 E0.02205 ; perimeter
G1 X56.389 Y62.797 E0.13595 ; perimeter
G1 X52.978 Y66.862 E0.21861 ; perimeter
G1 X55.506 Y68.984 E0.13595 ; perimeter
G1 X55.201 Y69.348 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.211 Y69.952 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X52.683 Y67.831 E0.13595 ; perimeter
G1 X50.234 Y70.750 E0.15696 ; perimeter
G1 X49.119 Y69.814 E0.05995 ; perimeter
G1 X58.626 Y58.484 E0.60929 ; perimeter
G1 X59.741 Y59.420 E0.05995 ; perimeter
G1 X57.292 Y62.338 E0.15696 ; perimeter
G1 X59.820 Y64.460 E0.13595 ; perimeter
G1 X58.966 Y65.477 E0.05471 ; perimeter
G1 X56.438 Y63.356 E0.13595 ; perimeter
G1 X53.537 Y66.814 E0.18596 ; perimeter
G1 X56.065 Y68.935 E0.13595 ; perimeter
G1 X55.250 Y69.906 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.940 Y69.658 F10800.000 ; move inwards before travel
G1 F8640
G1 X52.690 Y67.837 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
G1 X90.977 Y77.562 ; move to first perimeter point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.22054 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X63.409 Y58.740 E0.98573 ; perimeter
G1 X63.049 Y58.479 E0.01834 ; perimeter
G1 X62.636 Y58.264 E0.01917 ; perimeter
G1 X62.200 Y58.112 E0.01903 ; perimeter
G1 X61.749 Y58.032 E0.01884 ; perimeter
G1 X61.297 Y58.026 E0.01864 ; perimeter
G1 X60.855 Y58.100 E0.01847 ; perimeter
G1 X60.437 Y58.255 E0.01834 ; perimeter
G1 X60.223 Y58.388 E0.01039 ; perimeter
G1 X59.665 Y57.920 E0.03001 ; perimeter
G1 X59.921 Y57.733 E0.01306 ; perimeter
G1 X60.240 Y57.571 E0.01470 ; perimeter
G1 X60.597 Y57.453 E0.01552 ; perimeter
G1 X60.854 Y57.404 E0.01077 ; perimeter
G1 X61.399 Y57.375 E0.02246 ; perimeter
G1 X61.672 Y57.395 E0.01131 ; perimeter
G1 X62.103 Y57.474 E0.01802 ; perimeter
G1 X62.529 Y57.607 E0.01841 ; perimeter
G1 X62.952 Y57.795 E0.01905 ; perimeter
G1 X63.353 Y58.030 E0.01916 ; perimeter
G1 X63.749 Y58.327 E0.02038 ; perimeter
G1 X81.934 Y73.586 E0.97792 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X91.321 Y77.152 E0.22857 ; perimeter
G1 X91.015 Y77.516 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X91.026 Y78.120 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.23092 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X63.165 Y59.053 E0.99109 ; perimeter
G1 X62.839 Y58.817 E0.01657 ; perimeter
G1 X62.479 Y58.628 E0.01678 ; perimeter
G1 X62.099 Y58.497 E0.01654 ; perimeter
G1 X61.712 Y58.428 E0.01621 ; perimeter
G1 X61.327 Y58.423 E0.01584 ; perimeter
G1 X60.957 Y58.485 E0.01546 ; perimeter
G1 X60.613 Y58.613 E0.01513 ; perimeter
G1 X60.306 Y58.804 E0.01489 ; perimeter
G1 X60.211 Y58.895 E0.00544 ; perimeter
G1 X59.079 Y57.945 E0.06089 ; perimeter
G1 X59.382 Y57.635 E0.01787 ; perimeter
G1 X59.714 Y57.394 E0.01687 ; perimeter
G1 X60.087 Y57.204 E0.01724 ; perimeter
G1 X60.498 Y57.069 E0.01783 ; perimeter
G1 X60.806 Y57.010 E0.01292 ; perimeter
G1 X61.403 Y56.977 E0.02462 ; perimeter
G1 X61.723 Y57.001 E0.01324 ; perimeter
G1 X62.198 Y57.089 E0.01987 ; perimeter
G1 X62.669 Y57.235 E0.02034 ; perimeter
G1 X63.132 Y57.441 E0.02085 ; perimeter
G1 X63.574 Y57.700 E0.02111 ; perimeter
G1 X63.995 Y58.016 E0.02170 ; perimeter
G1 X82.078 Y73.189 E0.97243 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X91.879 Y77.103 E0.25084 ; perimeter
G1 X91.064 Y78.074 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X90.739 Y77.842 F10800.000 ; move inwards before travel
G1 F8640
G1 X88.520 Y75.986 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X76.970 Y87.693 E0.08702 ; perimeter
G1 X77.315 Y87.283 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.08702 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X83.991 Y79.326 E0.08702 ; perimeter
G1 X84.335 Y78.916 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.08702 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X76.412 Y87.742 E0.08702 ; perimeter
G1 X77.266 Y86.725 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.08702 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X83.433 Y79.375 E0.08702 ; perimeter
G1 X84.286 Y78.358 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.08702 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
G1 X98.987 Y76.219 ; move to first perimeter point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.849 Y75.969 E0.04799 ; perimeter
G1 X97.850 Y75.458 E0.02107 ; perimeter
G1 X98.987 Y75.700 E0.04788 ; perimeter
G1 X98.987 Y76.159 E0.01889 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y76.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.452 Y76.288 E0.08137 ; perimeter
G1 X97.455 Y74.959 E0.05477 ; perimeter
G1 X99.383 Y75.377 E0.08129 ; perimeter
G1 X99.383 Y76.643 E0.05214 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y77.183 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.988 Y77.030 E0.03321 ; perimeter
G1 X97.055 Y76.607 E0.08152 ; perimeter
G1 X97.060 Y74.459 E0.08847 ; perimeter
G1 X98.300 Y74.749 E0.05246 ; perimeter
G1 X99.780 Y75.054 E0.06225 ; perimeter
G1 X99.780 Y77.123 E0.08521 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.423 Y77.002 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.988 Y77.030 E-0.18405 ; wipe and retract
G1 X97.055 Y76.607 E-0.45689 ; wipe and retract
G1 X97.056 Y76.091 E-0.11906 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
G1 X151.013 Y76.219 ; move to first perimeter point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y75.700 E0.02136 ; perimeter
G1 X152.153 Y75.457 E0.04800 ; perimeter
G1 X152.153 Y75.969 E0.02108 ; perimeter
G1 X151.072 Y76.206 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y76.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.617 Y75.377 E0.05461 ; perimeter
G1 X152.549 Y74.958 E0.08146 ; perimeter
G1 X152.549 Y76.288 E0.05480 ; perimeter
G1 X150.676 Y76.691 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y77.183 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.220 Y75.054 E0.08769 ; perimeter
G1 X151.700 Y74.749 E0.06225 ; perimeter
G1 X152.945 Y74.458 E0.05268 ; perimeter
G1 X152.945 Y76.607 E0.08852 ; perimeter
G1 X151.012 Y77.030 E0.08153 ; perimeter
G1 X150.279 Y77.171 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.396 Y76.823 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.220 Y75.054 E-0.48905 ; wipe and retract
G1 X151.370 Y74.817 E-0.27095 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X165.665 Y78.916 E0.08702 ; perimeter
G1 X166.009 Y79.326 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.08702 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X172.685 Y87.283 E0.08702 ; perimeter
G1 X173.030 Y87.693 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.08702 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X165.714 Y78.358 E0.08702 ; perimeter
G1 X166.567 Y79.375 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.08702 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X172.734 Y86.725 E0.08702 ; perimeter
G1 X173.588 Y87.742 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.08702 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
G1 X159.023 Y77.562 ; move to first perimeter point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X158.679 Y77.152 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.22857 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X186.251 Y58.327 E0.97792 ; perimeter
G1 X186.647 Y58.030 E0.02038 ; perimeter
G1 X187.048 Y57.795 E0.01916 ; perimeter
G1 X187.471 Y57.607 E0.01906 ; perimeter
G1 X187.897 Y57.474 E0.01841 ; perimeter
G1 X188.322 Y57.396 E0.01778 ; perimeter
G1 X188.743 Y57.372 E0.01736 ; perimeter
G1 X189.010 Y57.387 E0.01104 ; perimeter
G1 X189.517 Y57.487 E0.02127 ; perimeter
G1 X189.757 Y57.570 E0.01047 ; perimeter
G1 X190.079 Y57.733 E0.01486 ; perimeter
G1 X190.335 Y57.920 E0.01306 ; perimeter
G1 X189.777 Y58.388 E0.03001 ; perimeter
G1 X189.563 Y58.255 E0.01039 ; perimeter
G1 X189.145 Y58.100 E0.01834 ; perimeter
G1 X188.703 Y58.026 E0.01847 ; perimeter
G1 X188.251 Y58.032 E0.01864 ; perimeter
G1 X187.800 Y58.112 E0.01884 ; perimeter
G1 X187.364 Y58.264 E0.01903 ; perimeter
G1 X186.953 Y58.479 E0.01912 ; perimeter
G1 X186.630 Y58.710 E0.01635 ; perimeter
G1 X168.261 Y74.121 E0.98777 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X159.069 Y77.523 E0.21807 ; perimeter
M204 S1000 ; adjust acceleration
G1 X158.974 Y78.120 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X158.121 Y77.103 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.25084 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X186.005 Y58.016 E0.97243 ; perimeter
G1 X186.426 Y57.700 E0.02170 ; perimeter
G1 X186.868 Y57.441 E0.02111 ; perimeter
G1 X187.331 Y57.235 E0.02085 ; perimeter
G1 X187.802 Y57.089 E0.02034 ; perimeter
G1 X188.275 Y57.002 E0.01979 ; perimeter
G1 X188.742 Y56.975 E0.01928 ; perimeter
G1 X189.060 Y56.992 E0.01310 ; perimeter
G1 X189.620 Y57.104 E0.02354 ; perimeter
G1 X189.912 Y57.204 E0.01272 ; perimeter
G1 X190.286 Y57.394 E0.01730 ; perimeter
G1 X190.618 Y57.635 E0.01687 ; perimeter
G1 X190.921 Y57.945 E0.01787 ; perimeter
G1 X189.789 Y58.895 E0.06089 ; perimeter
G1 X189.694 Y58.804 E0.00544 ; perimeter
G1 X189.387 Y58.613 E0.01489 ; perimeter
G1 X189.043 Y58.485 E0.01513 ; perimeter
G1 X188.673 Y58.423 E0.01546 ; perimeter
G1 X188.288 Y58.428 E0.01584 ; perimeter
G1 X187.901 Y58.497 E0.01621 ; perimeter
G1 X187.521 Y58.628 E0.01654 ; perimeter
G1 X187.161 Y58.817 E0.01675 ; perimeter
G1 X186.873 Y59.023 E0.01458 ; perimeter
G1 X168.405 Y74.517 E0.99309 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X159.020 Y78.082 E0.22845 ; perimeter
M204 S1000 ; adjust acceleration
G1 X158.949 Y77.721 F10800.000 ; move inwards before travel
G1 F8640
G1 X158.121 Y77.103 E-0.30695 ; wipe and retract
G1 X159.624 Y75.842 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
G1 X194.838 Y69.394 ; move to first perimeter point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X194.494 Y68.984 E0.02205 ; perimeter
G1 X197.022 Y66.862 E0.13595 ; perimeter
G1 X193.611 Y62.797 E0.21861 ; perimeter
G1 X191.083 Y64.919 E0.13595 ; perimeter
G1 X190.739 Y64.508 E0.02205 ; perimeter
G1 X193.267 Y62.387 E0.13595 ; perimeter
G1 X190.818 Y59.469 E0.15696 ; perimeter
G1 X191.325 Y59.043 E0.02730 ; perimeter
G1 X200.322 Y69.765 E0.57663 ; perimeter
G1 X199.815 Y70.191 E0.02729 ; perimeter
G1 X197.366 Y67.272 E0.15696 ; perimeter
G1 X194.884 Y69.355 E0.13348 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.789 Y69.952 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X193.935 Y68.935 E0.05471 ; perimeter
G1 X196.463 Y66.814 E0.13595 ; perimeter
G1 X193.562 Y63.356 E0.18596 ; perimeter
G1 X191.034 Y65.477 E0.13595 ; perimeter
G1 X190.180 Y64.460 E0.05471 ; perimeter
G1 X192.708 Y62.338 E0.13595 ; perimeter
G1 X190.259 Y59.420 E0.15696 ; perimeter
G1 X191.374 Y58.484 E0.05995 ; perimeter
G1 X200.881 Y69.814 E0.60929 ; perimeter
G1 X199.766 Y70.750 E0.05995 ; perimeter
G1 X197.317 Y67.831 E0.15696 ; perimeter
G1 X194.835 Y69.914 E0.13348 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.833 Y69.555 F10800.000 ; move inwards before travel
G1 F8640
G1 X193.935 Y68.935 E-0.30695 ; wipe and retract
M73 P79 R28
G1 X195.438 Y67.674 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.747 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X153.476 Y100.738 E0.48911 ; perimeter
G1 X153.475 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E0.75939 ; perimeter
G1 X200.941 Y75.842 E1.56125 ; perimeter
G1 X201.261 Y75.532 E0.01834 ; perimeter
G1 X201.545 Y75.164 E0.01917 ; perimeter
G1 X201.769 Y74.760 E0.01903 ; perimeter
G1 X201.927 Y74.331 E0.01884 ; perimeter
G1 X202.011 Y73.886 E0.01864 ; perimeter
G1 X202.015 Y73.438 E0.01847 ; perimeter
G1 X201.935 Y73.000 E0.01834 ; perimeter
G1 X201.770 Y72.589 E0.01826 ; perimeter
G1 X201.542 Y72.249 E0.01685 ; perimeter
G1 X200.777 Y71.338 E0.04901 ; perimeter
G1 X201.284 Y70.912 E0.02729 ; perimeter
G1 X202.175 Y71.973 E0.05707 ; perimeter
G1 X202.386 Y72.271 E0.01507 ; perimeter
G1 X202.538 Y72.582 E0.01425 ; perimeter
G1 X202.644 Y72.927 E0.01486 ; perimeter
G1 X202.683 Y73.178 E0.01047 ; perimeter
G1 X202.694 Y73.694 E0.02127 ; perimeter
G1 X202.662 Y73.960 E0.01104 ; perimeter
G1 X202.565 Y74.371 E0.01736 ; perimeter
G1 X202.415 Y74.775 E0.01778 ; perimeter
G1 X202.207 Y75.177 E0.01862 ; perimeter
G1 X201.955 Y75.552 E0.01862 ; perimeter
G1 X201.649 Y75.911 E0.01946 ; perimeter
G1 X201.289 Y76.249 E0.02031 ; perimeter
G1 X172.104 Y100.738 E1.56950 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.807 Y102.643 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.583 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X153.080 Y101.134 E0.48908 ; perimeter
G1 X153.078 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E0.76980 ; perimeter
G1 X200.675 Y75.548 E1.55472 ; perimeter
G1 X200.964 Y75.268 E0.01657 ; perimeter
G1 X201.213 Y74.945 E0.01678 ; perimeter
G1 X201.408 Y74.594 E0.01654 ; perimeter
G1 X201.544 Y74.225 E0.01621 ; perimeter
G1 X201.615 Y73.847 E0.01584 ; perimeter
G1 X201.618 Y73.472 E0.01546 ; perimeter
G1 X201.552 Y73.110 E0.01513 ; perimeter
G1 X201.418 Y72.775 E0.01489 ; perimeter
G1 X201.224 Y72.488 E0.01426 ; perimeter
G1 X200.218 Y71.289 E0.06447 ; perimeter
G1 X201.333 Y70.353 E0.05995 ; perimeter
G1 X202.489 Y71.731 E0.07406 ; perimeter
G1 X202.728 Y72.068 E0.01706 ; perimeter
G1 X202.908 Y72.436 E0.01687 ; perimeter
G1 X203.031 Y72.838 E0.01730 ; perimeter
G1 X203.079 Y73.143 E0.01272 ; perimeter
G1 X203.091 Y73.714 E0.02354 ; perimeter
G1 X203.053 Y74.030 E0.01310 ; perimeter
G1 X202.945 Y74.486 E0.01928 ; perimeter
G1 X202.778 Y74.936 E0.01979 ; perimeter
G1 X202.551 Y75.376 E0.02041 ; perimeter
G1 X202.270 Y75.793 E0.02070 ; perimeter
G1 X201.936 Y76.185 E0.02122 ; perimeter
G1 X201.552 Y76.545 E0.02168 ; perimeter
G1 X172.248 Y101.134 E1.57589 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.643 Y103.039 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.567 Y102.640 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.953 Y102.409 E-0.21581 ; wipe and retract
G1 X164.953 Y101.134 E-0.29436 ; wipe and retract
G1 X163.871 Y101.134 E-0.24983 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
G1 X166.843 Y100.714 ; move to first infill point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.061 Y101.496 E0.05566 ; infill
G1 X166.061 Y101.931 E0.02188 ; infill
G1 X166.312 Y101.931 E0.01260 ; infill
G1 X167.327 Y100.915 E0.07230 ; infill
G1 X168.012 Y100.915 E0.03448 ; infill
G1 X166.996 Y101.931 E0.07230 ; infill
G1 X167.681 Y101.931 E0.03448 ; infill
G1 X168.697 Y100.915 E0.07230 ; infill
G1 X169.382 Y100.915 E0.03448 ; infill
G1 X168.366 Y101.931 E0.07230 ; infill
G1 X169.051 Y101.931 E0.03448 ; infill
G1 X169.744 Y101.238 E0.04931 ; infill
G1 X169.744 Y101.923 E0.03448 ; infill
G1 X169.535 Y102.131 E0.01484 ; infill
G1 F8640
G1 X169.744 Y101.923 E-0.06809 ; wipe and retract
G1 X169.744 Y101.238 E-0.15815 ; wipe and retract
G1 X169.051 Y101.931 E-0.22616 ; wipe and retract
G1 X168.366 Y101.931 E-0.15815 ; wipe and retract
G1 X168.824 Y101.473 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.968 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X48.426 Y114.395 E1.56950 ; perimeter
G1 X48.066 Y114.057 E0.02031 ; perimeter
G1 X47.762 Y113.700 E0.01934 ; perimeter
G1 X47.505 Y113.319 E0.01894 ; perimeter
G1 X47.300 Y112.921 E0.01841 ; perimeter
G1 X47.150 Y112.517 E0.01778 ; perimeter
G1 X47.053 Y112.107 E0.01736 ; perimeter
G1 X47.020 Y111.833 E0.01134 ; perimeter
G1 X47.019 Y111.438 E0.01630 ; perimeter
G1 X47.072 Y111.070 E0.01532 ; perimeter
G1 X47.177 Y110.728 E0.01470 ; perimeter
G1 X47.328 Y110.418 E0.01425 ; perimeter
G1 X47.540 Y110.119 E0.01507 ; perimeter
G1 X48.430 Y109.058 E0.05707 ; perimeter
G1 X48.938 Y109.484 E0.02729 ; perimeter
G1 X48.173 Y110.395 E0.04901 ; perimeter
G1 X47.945 Y110.735 E0.01685 ; perimeter
G1 X47.780 Y111.146 E0.01826 ; perimeter
G1 X47.700 Y111.584 E0.01834 ; perimeter
G1 X47.704 Y112.032 E0.01847 ; perimeter
G1 X47.788 Y112.477 E0.01864 ; perimeter
G1 X47.946 Y112.906 E0.01884 ; perimeter
G1 X48.170 Y113.310 E0.01903 ; perimeter
G1 X48.454 Y113.678 E0.01917 ; perimeter
G1 X48.774 Y113.988 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.56125 ; perimeter
G1 X96.240 Y138.349 E0.75939 ; perimeter
G1 X96.239 Y138.884 E0.02205 ; perimeter
G1 X84.366 Y138.884 E0.48911 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X84.010 Y140.747 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.132 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X48.163 Y114.691 E1.57589 ; perimeter
G1 X47.779 Y114.331 E0.02168 ; perimeter
G1 X47.446 Y113.940 E0.02118 ; perimeter
G1 X47.163 Y113.521 E0.02081 ; perimeter
G1 X46.937 Y113.082 E0.02034 ; perimeter
G1 X46.769 Y112.632 E0.01979 ; perimeter
G1 X46.662 Y112.176 E0.01928 ; perimeter
G1 X46.624 Y111.858 E0.01321 ; perimeter
G1 X46.623 Y111.410 E0.01847 ; perimeter
G1 X46.684 Y110.983 E0.01776 ; perimeter
G1 X46.807 Y110.583 E0.01724 ; perimeter
G1 X46.987 Y110.215 E0.01687 ; perimeter
G1 X47.226 Y109.877 E0.01706 ; perimeter
G1 X48.382 Y108.500 E0.07406 ; perimeter
G1 X49.496 Y109.435 E0.05995 ; perimeter
G1 X48.490 Y110.634 E0.06447 ; perimeter
G1 X48.297 Y110.921 E0.01426 ; perimeter
G1 X48.163 Y111.256 E0.01489 ; perimeter
G1 X48.097 Y111.618 E0.01513 ; perimeter
G1 X48.100 Y111.993 E0.01546 ; perimeter
G1 X48.171 Y112.371 E0.01584 ; perimeter
G1 X48.307 Y112.740 E0.01621 ; perimeter
G1 X48.502 Y113.091 E0.01654 ; perimeter
G1 X48.751 Y113.414 E0.01678 ; perimeter
G1 X49.040 Y113.694 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.55472 ; perimeter
G1 X96.636 Y137.952 E0.76980 ; perimeter
G1 X96.634 Y139.280 E0.05471 ; perimeter
G1 X84.762 Y139.280 E0.48908 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.175 Y141.143 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.809 Y140.950 F10800.000 ; move inwards before travel
G1 F8640
G1 X80.883 Y141.173 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
G1 X83.445 Y140.278 ; move to first infill point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.654 Y140.069 E0.01484 ; infill
G1 X83.654 Y139.384 E0.03448 ; infill
G1 X82.961 Y140.077 E0.04931 ; infill
G1 X82.276 Y140.077 E0.03448 ; infill
G1 X83.292 Y139.061 E0.07230 ; infill
G1 X82.607 Y139.061 E0.03448 ; infill
G1 X81.591 Y140.077 E0.07230 ; infill
G1 X80.906 Y140.077 E0.03448 ; infill
G1 X81.922 Y139.061 E0.07230 ; infill
G1 X81.237 Y139.061 E0.03448 ; infill
G1 X80.221 Y140.077 E0.07230 ; infill
G1 X79.971 Y140.077 E0.01260 ; infill
G1 X79.971 Y139.642 E0.02188 ; infill
G1 X80.753 Y138.860 E0.05566 ; infill
G1 F8640
G1 X79.971 Y139.642 E-0.25531 ; wipe and retract
G1 X79.971 Y140.077 E-0.10036 ; wipe and retract
G1 X80.221 Y140.077 E-0.05779 ; wipe and retract
G1 X81.237 Y139.061 E-0.33164 ; wipe and retract
G1 X81.301 Y139.061 E-0.01490 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
G1 X54.877 Y107.540 ; move to first perimeter point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X52.349 Y105.419 E0.13595 ; perimeter
G1 X49.900 Y108.337 E0.15696 ; perimeter
M73 Q79 S29
G1 X49.392 Y107.911 E0.02729 ; perimeter
G1 X58.390 Y97.189 E0.57663 ; perimeter
G1 X58.897 Y97.615 E0.02729 ; perimeter
G1 X56.448 Y100.533 E0.15696 ; perimeter
G1 X58.976 Y102.655 E0.13595 ; perimeter
G1 X58.632 Y103.065 E0.02205 ; perimeter
G1 X56.104 Y100.943 E0.13595 ; perimeter
G1 X52.693 Y105.009 E0.21861 ; perimeter
G1 X55.221 Y107.130 E0.13595 ; perimeter
G1 X54.916 Y107.494 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.926 Y108.098 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X52.398 Y105.977 E0.13595 ; perimeter
G1 X49.949 Y108.896 E0.15696 ; perimeter
G1 X48.834 Y107.960 E0.05995 ; perimeter
G1 X58.341 Y96.630 E0.60929 ; perimeter
G1 X59.456 Y97.566 E0.05995 ; perimeter
G1 X57.007 Y100.484 E0.15696 ; perimeter
G1 X59.535 Y102.606 E0.13595 ; perimeter
G1 X58.681 Y103.623 E0.05471 ; perimeter
G1 X56.153 Y101.502 E0.13595 ; perimeter
G1 X53.252 Y104.960 E0.18596 ; perimeter
G1 X55.780 Y107.081 E0.13595 ; perimeter
G1 X54.964 Y108.052 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.655 Y107.804 F10800.000 ; move inwards before travel
G1 F8640
G1 X52.405 Y105.983 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
G1 X90.692 Y115.708 ; move to first perimeter point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.22054 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X63.124 Y96.886 E0.98573 ; perimeter
G1 X62.763 Y96.625 E0.01834 ; perimeter
G1 X62.351 Y96.410 E0.01917 ; perimeter
G1 X61.914 Y96.259 E0.01903 ; perimeter
G1 X61.464 Y96.178 E0.01884 ; perimeter
G1 X61.012 Y96.173 E0.01864 ; perimeter
G1 X60.570 Y96.246 E0.01847 ; perimeter
G1 X60.152 Y96.401 E0.01834 ; perimeter
G1 X59.938 Y96.534 E0.01039 ; perimeter
G1 X59.380 Y96.066 E0.03001 ; perimeter
G1 X59.636 Y95.879 E0.01306 ; perimeter
G1 X59.954 Y95.718 E0.01470 ; perimeter
G1 X60.312 Y95.600 E0.01552 ; perimeter
G1 X60.569 Y95.551 E0.01077 ; perimeter
G1 X61.113 Y95.521 E0.02246 ; perimeter
G1 X61.387 Y95.541 E0.01131 ; perimeter
G1 X61.817 Y95.620 E0.01802 ; perimeter
G1 X62.244 Y95.753 E0.01841 ; perimeter
G1 X62.667 Y95.941 E0.01905 ; perimeter
G1 X63.068 Y96.176 E0.01916 ; perimeter
G1 X63.464 Y96.473 E0.02038 ; perimeter
G1 X81.649 Y111.732 E0.97792 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X91.036 Y115.298 E0.22857 ; perimeter
G1 X90.730 Y115.662 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X90.741 Y116.267 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.23092 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X62.880 Y97.199 E0.99109 ; perimeter
G1 X62.554 Y96.963 E0.01657 ; perimeter
G1 X62.193 Y96.775 E0.01678 ; perimeter
G1 X61.814 Y96.643 E0.01654 ; perimeter
G1 X61.427 Y96.574 E0.01621 ; perimeter
G1 X61.042 Y96.569 E0.01584 ; perimeter
G1 X60.672 Y96.631 E0.01546 ; perimeter
G1 X60.328 Y96.759 E0.01513 ; perimeter
G1 X60.021 Y96.950 E0.01489 ; perimeter
G1 X59.926 Y97.041 E0.00544 ; perimeter
G1 X58.793 Y96.091 E0.06089 ; perimeter
G1 X59.097 Y95.782 E0.01787 ; perimeter
G1 X59.428 Y95.541 E0.01687 ; perimeter
G1 X59.802 Y95.351 E0.01724 ; perimeter
G1 X60.213 Y95.215 E0.01783 ; perimeter
G1 X60.521 Y95.156 E0.01292 ; perimeter
G1 X61.117 Y95.124 E0.02462 ; perimeter
G1 X61.438 Y95.148 E0.01324 ; perimeter
G1 X61.912 Y95.235 E0.01987 ; perimeter
G1 X62.384 Y95.382 E0.02034 ; perimeter
G1 X62.847 Y95.587 E0.02085 ; perimeter
G1 X63.288 Y95.847 E0.02111 ; perimeter
G1 X63.710 Y96.162 E0.02170 ; perimeter
G1 X81.793 Y111.335 E0.97243 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X91.594 Y115.249 E0.25084 ; perimeter
G1 X90.779 Y116.221 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X90.453 Y115.988 F10800.000 ; move inwards before travel
G1 F8640
G1 X88.235 Y114.132 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X76.685 Y125.839 E0.08702 ; perimeter
G1 X77.029 Y125.429 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.08702 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X83.706 Y117.472 E0.08702 ; perimeter
G1 X84.050 Y117.062 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.08702 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X76.127 Y125.888 E0.08702 ; perimeter
G1 X76.981 Y124.871 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.08702 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X83.147 Y117.521 E0.08702 ; perimeter
G1 X84.001 Y116.504 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.08702 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
G1 X98.702 Y114.365 ; move to first perimeter point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.564 Y114.115 E0.04799 ; perimeter
G1 X97.565 Y113.604 E0.02107 ; perimeter
G1 X98.702 Y113.846 E0.04788 ; perimeter
G1 X98.702 Y114.305 E0.01889 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y114.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.167 Y114.434 E0.08137 ; perimeter
G1 X97.170 Y113.105 E0.05477 ; perimeter
G1 X99.098 Y113.523 E0.08129 ; perimeter
G1 X99.098 Y114.789 E0.05214 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y115.329 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.703 Y115.176 E0.03321 ; perimeter
G1 X96.770 Y114.753 E0.08152 ; perimeter
G1 X96.774 Y112.605 E0.08847 ; perimeter
G1 X98.015 Y112.895 E0.05246 ; perimeter
G1 X99.494 Y113.200 E0.06225 ; perimeter
G1 X99.494 Y115.269 E0.08521 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.137 Y115.148 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.703 Y115.176 E-0.18405 ; wipe and retract
G1 X96.770 Y114.753 E-0.45689 ; wipe and retract
G1 X96.771 Y114.237 E-0.11906 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
G1 X150.728 Y114.365 ; move to first perimeter point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y113.846 E0.02136 ; perimeter
G1 X151.868 Y113.603 E0.04800 ; perimeter
G1 X151.868 Y114.115 E0.02108 ; perimeter
G1 X150.787 Y114.352 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y114.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.332 Y113.523 E0.05461 ; perimeter
G1 X152.264 Y113.104 E0.08146 ; perimeter
G1 X152.264 Y114.434 E0.05480 ; perimeter
G1 X150.390 Y114.837 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y115.329 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.935 Y113.200 E0.08769 ; perimeter
G1 X151.415 Y112.895 E0.06225 ; perimeter
G1 X152.660 Y112.604 E0.05268 ; perimeter
G1 X152.660 Y114.753 E0.08852 ; perimeter
G1 X150.727 Y115.176 E0.08153 ; perimeter
G1 X149.994 Y115.317 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.111 Y114.969 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.935 Y113.200 E-0.48905 ; wipe and retract
G1 X151.084 Y112.963 E-0.27095 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X165.380 Y117.062 E0.08702 ; perimeter
G1 X165.724 Y117.472 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.08702 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X172.400 Y125.429 E0.08702 ; perimeter
G1 X172.744 Y125.839 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.08702 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X165.429 Y116.504 E0.08702 ; perimeter
G1 X166.282 Y117.521 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.08702 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X172.449 Y124.871 E0.08702 ; perimeter
G1 X173.303 Y125.888 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.08702 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
G1 X158.738 Y115.708 ; move to first perimeter point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X158.394 Y115.298 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.22857 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X185.966 Y96.473 E0.97792 ; perimeter
G1 X186.362 Y96.176 E0.02038 ; perimeter
G1 X186.763 Y95.941 E0.01916 ; perimeter
G1 X187.186 Y95.753 E0.01906 ; perimeter
G1 X187.612 Y95.620 E0.01841 ; perimeter
G1 X188.037 Y95.542 E0.01778 ; perimeter
G1 X188.458 Y95.519 E0.01736 ; perimeter
G1 X188.725 Y95.533 E0.01104 ; perimeter
G1 X189.232 Y95.633 E0.02127 ; perimeter
G1 X189.472 Y95.716 E0.01047 ; perimeter
G1 X189.793 Y95.879 E0.01486 ; perimeter
G1 X190.050 Y96.066 E0.01306 ; perimeter
G1 X189.492 Y96.534 E0.03001 ; perimeter
G1 X189.277 Y96.401 E0.01039 ; perimeter
G1 X188.860 Y96.246 E0.01834 ; perimeter
G1 X188.418 Y96.173 E0.01847 ; perimeter
G1 X187.965 Y96.178 E0.01864 ; perimeter
G1 X187.515 Y96.259 E0.01884 ; perimeter
G1 X187.079 Y96.410 E0.01903 ; perimeter
G1 X186.668 Y96.625 E0.01912 ; perimeter
G1 X186.345 Y96.856 E0.01635 ; perimeter
G1 X167.976 Y112.267 E0.98777 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X158.784 Y115.670 E0.21807 ; perimeter
M204 S1000 ; adjust acceleration
G1 X158.689 Y116.267 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X157.835 Y115.249 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.25084 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X185.719 Y96.162 E0.97243 ; perimeter
G1 X186.141 Y95.847 E0.02170 ; perimeter
G1 X186.583 Y95.587 E0.02111 ; perimeter
G1 X187.046 Y95.382 E0.02085 ; perimeter
G1 X187.517 Y95.235 E0.02034 ; perimeter
G1 X187.990 Y95.148 E0.01979 ; perimeter
G1 X188.457 Y95.122 E0.01928 ; perimeter
G1 X188.775 Y95.139 E0.01310 ; perimeter
G1 X189.335 Y95.250 E0.02354 ; perimeter
G1 X189.627 Y95.350 E0.01272 ; perimeter
G1 X190.001 Y95.541 E0.01730 ; perimeter
G1 X190.332 Y95.782 E0.01687 ; perimeter
G1 X190.636 Y96.091 E0.01787 ; perimeter
G1 X189.504 Y97.041 E0.06089 ; perimeter
G1 X189.409 Y96.950 E0.00544 ; perimeter
G1 X189.102 Y96.759 E0.01489 ; perimeter
G1 X188.758 Y96.631 E0.01513 ; perimeter
G1 X188.387 Y96.569 E0.01546 ; perimeter
G1 X188.003 Y96.574 E0.01584 ; perimeter
G1 X187.616 Y96.643 E0.01621 ; perimeter
G1 X187.236 Y96.775 E0.01654 ; perimeter
G1 X186.876 Y96.963 E0.01675 ; perimeter
G1 X186.588 Y97.169 E0.01458 ; perimeter
G1 X168.120 Y112.663 E0.99309 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X158.735 Y116.228 E0.22845 ; perimeter
M204 S1000 ; adjust acceleration
G1 X158.664 Y115.867 F10800.000 ; move inwards before travel
G1 F8640
G1 X157.835 Y115.249 E-0.30695 ; wipe and retract
G1 X159.338 Y113.988 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
G1 X194.553 Y107.540 ; move to first perimeter point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X194.209 Y107.130 E0.02205 ; perimeter
G1 X196.737 Y105.009 E0.13595 ; perimeter
G1 X193.325 Y100.943 E0.21861 ; perimeter
G1 X190.797 Y103.065 E0.13595 ; perimeter
G1 X190.453 Y102.655 E0.02205 ; perimeter
G1 X192.981 Y100.533 E0.13595 ; perimeter
G1 X190.532 Y97.615 E0.15696 ; perimeter
G1 X191.040 Y97.189 E0.02730 ; perimeter
G1 X200.037 Y107.911 E0.57663 ; perimeter
G1 X199.530 Y108.337 E0.02729 ; perimeter
G1 X197.081 Y105.419 E0.15696 ; perimeter
G1 X194.599 Y107.501 E0.13348 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.504 Y108.098 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X193.650 Y107.081 E0.05471 ; perimeter
G1 X196.178 Y104.960 E0.13595 ; perimeter
G1 X193.277 Y101.502 E0.18596 ; perimeter
G1 X190.749 Y103.623 E0.13595 ; perimeter
G1 X189.895 Y102.606 E0.05471 ; perimeter
G1 X192.423 Y100.484 E0.13595 ; perimeter
G1 X189.974 Y97.566 E0.15696 ; perimeter
G1 X191.089 Y96.630 E0.05995 ; perimeter
G1 X200.596 Y107.960 E0.60929 ; perimeter
G1 X199.481 Y108.896 E0.05995 ; perimeter
G1 X197.032 Y105.977 E0.15696 ; perimeter
G1 X194.550 Y108.060 E0.13348 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.548 Y107.701 F10800.000 ; move inwards before travel
G1 F8640
G1 X193.650 Y107.081 E-0.30695 ; wipe and retract
G1 X195.153 Y105.820 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.462 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X153.191 Y138.884 E0.48911 ; perimeter
G1 X153.190 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E0.75939 ; perimeter
G1 X200.656 Y113.988 E1.56125 ; perimeter
G1 X200.975 Y113.678 E0.01834 ; perimeter
G1 X201.260 Y113.310 E0.01917 ; perimeter
G1 X201.484 Y112.906 E0.01903 ; perimeter
G1 X201.642 Y112.477 E0.01884 ; perimeter
G1 X201.726 Y112.032 E0.01864 ; perimeter
G1 X201.730 Y111.584 E0.01847 ; perimeter
G1 X201.650 Y111.146 E0.01834 ; perimeter
G1 X201.485 Y110.735 E0.01826 ; perimeter
G1 X201.256 Y110.395 E0.01685 ; perimeter
G1 X200.492 Y109.484 E0.04901 ; perimeter
G1 X200.999 Y109.058 E0.02729 ; perimeter
G1 X201.890 Y110.119 E0.05707 ; perimeter
G1 X202.101 Y110.418 E0.01507 ; perimeter
G1 X202.253 Y110.728 E0.01425 ; perimeter
G1 X202.358 Y111.073 E0.01486 ; perimeter
G1 X202.398 Y111.324 E0.01047 ; perimeter
G1 X202.409 Y111.841 E0.02127 ; perimeter
G1 X202.377 Y112.107 E0.01104 ; perimeter
G1 X202.280 Y112.517 E0.01736 ; perimeter
G1 X202.129 Y112.921 E0.01778 ; perimeter
G1 X201.922 Y113.323 E0.01862 ; perimeter
G1 X201.670 Y113.698 E0.01862 ; perimeter
G1 X201.363 Y114.057 E0.01946 ; perimeter
G1 X201.004 Y114.395 E0.02031 ; perimeter
G1 X171.819 Y138.884 E1.56950 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.522 Y140.789 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.298 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X152.795 Y139.280 E0.48908 ; perimeter
G1 X152.793 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E0.76980 ; perimeter
G1 X200.390 Y113.694 E1.55472 ; perimeter
G1 X200.679 Y113.414 E0.01657 ; perimeter
G1 X200.928 Y113.091 E0.01678 ; perimeter
G1 X201.123 Y112.740 E0.01654 ; perimeter
G1 X201.258 Y112.371 E0.01621 ; perimeter
G1 X201.330 Y111.993 E0.01584 ; perimeter
G1 X201.333 Y111.618 E0.01546 ; perimeter
G1 X201.267 Y111.256 E0.01513 ; perimeter
G1 X201.132 Y110.921 E0.01489 ; perimeter
G1 X200.939 Y110.634 E0.01426 ; perimeter
G1 X199.933 Y109.435 E0.06447 ; perimeter
G1 X201.048 Y108.500 E0.05995 ; perimeter
G1 X202.204 Y109.877 E0.07406 ; perimeter
G1 X202.443 Y110.215 E0.01706 ; perimeter
G1 X202.623 Y110.583 E0.01687 ; perimeter
G1 X202.746 Y110.984 E0.01730 ; perimeter
G1 X202.794 Y111.289 E0.01272 ; perimeter
G1 X202.806 Y111.860 E0.02354 ; perimeter
G1 X202.767 Y112.176 E0.01310 ; perimeter
G1 X202.660 Y112.632 E0.01928 ; perimeter
G1 X202.493 Y113.082 E0.01979 ; perimeter
G1 X202.265 Y113.522 E0.02041 ; perimeter
G1 X201.985 Y113.939 E0.02070 ; perimeter
G1 X201.651 Y114.331 E0.02122 ; perimeter
G1 X201.267 Y114.691 E0.02168 ; perimeter
G1 X171.963 Y139.280 E1.57589 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.358 Y141.185 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.282 Y140.786 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.667 Y140.555 E-0.21581 ; wipe and retract
G1 X164.667 Y139.280 E-0.29436 ; wipe and retract
G1 X163.585 Y139.280 E-0.24983 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
G1 X166.558 Y138.860 ; move to first infill point
G1 Z17.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.776 Y139.642 E0.05566 ; infill
G1 X165.776 Y140.077 E0.02188 ; infill
G1 X166.026 Y140.077 E0.01260 ; infill
G1 X167.042 Y139.061 E0.07230 ; infill
G1 X167.727 Y139.061 E0.03448 ; infill
G1 X166.711 Y140.077 E0.07230 ; infill
G1 X167.396 Y140.077 E0.03448 ; infill
G1 X168.412 Y139.061 E0.07230 ; infill
G1 X169.097 Y139.061 E0.03448 ; infill
G1 X168.081 Y140.077 E0.07230 ; infill
G1 X168.766 Y140.077 E0.03448 ; infill
G1 X169.459 Y139.384 E0.04931 ; infill
G1 X169.459 Y140.069 E0.03448 ; infill
G1 X169.250 Y140.278 E0.01484 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;17.75


G1 F8640
G1 X169.459 Y140.069 E-0.06809 ; wipe and retract
G1 X169.459 Y139.384 E-0.15815 ; wipe and retract
G1 X168.766 Y140.077 E-0.22616 ; wipe and retract
G1 X168.081 Y140.077 E-0.15815 ; wipe and retract
G1 X168.539 Y139.619 E-0.14944 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;17.75
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.599 E0.06104 ; perimeter
G1 X84.255 Y100.599 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.06104 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.253 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X48.577 Y76.136 E1.57671 ; perimeter
G1 X48.218 Y75.800 E0.02025 ; perimeter
G1 X47.915 Y75.444 E0.01929 ; perimeter
G1 X47.658 Y75.063 E0.01889 ; perimeter
G1 X47.453 Y74.667 E0.01837 ; perimeter
G1 X47.302 Y74.264 E0.01774 ; perimeter
G1 X47.205 Y73.855 E0.01730 ; perimeter
G1 X47.170 Y73.568 E0.01192 ; perimeter
G1 X47.170 Y73.175 E0.01621 ; perimeter
G1 X47.224 Y72.808 E0.01527 ; perimeter
G1 X47.328 Y72.468 E0.01466 ; perimeter
G1 X47.480 Y72.158 E0.01421 ; perimeter
G1 X47.691 Y71.860 E0.01503 ; perimeter
G1 X48.581 Y70.799 E0.05707 ; perimeter
G1 X49.089 Y71.225 E0.02729 ; perimeter
G1 X48.324 Y72.137 E0.04901 ; perimeter
G1 X48.096 Y72.476 E0.01685 ; perimeter
G1 X47.931 Y72.887 E0.01826 ; perimeter
G1 X47.851 Y73.325 E0.01834 ; perimeter
G1 X47.855 Y73.773 E0.01847 ; perimeter
G1 X47.939 Y74.218 E0.01864 ; perimeter
G1 X48.097 Y74.647 E0.01884 ; perimeter
G1 X48.321 Y75.051 E0.01903 ; perimeter
G1 X48.605 Y75.420 E0.01917 ; perimeter
G1 X48.925 Y75.729 E0.01834 ; perimeter
G1 X78.091 Y100.203 E1.56846 ; perimeter
G1 X96.282 Y100.203 E0.74941 ; perimeter
G1 X96.284 Y100.738 E0.02205 ; perimeter
G1 X84.651 Y100.738 E0.47922 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.296 Y102.600 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.417 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X48.314 Y76.433 E1.58311 ; perimeter
G1 X47.931 Y76.074 E0.02161 ; perimeter
G1 X47.598 Y75.684 E0.02112 ; perimeter
G1 X47.317 Y75.266 E0.02076 ; perimeter
G1 X47.090 Y74.828 E0.02029 ; perimeter
G1 X46.922 Y74.380 E0.01974 ; perimeter
G1 X46.815 Y73.925 E0.01923 ; perimeter
G1 X46.774 Y73.592 E0.01382 ; perimeter
G1 X46.774 Y73.146 E0.01839 ; perimeter
G1 X46.836 Y72.721 E0.01770 ; perimeter
G1 X46.959 Y72.322 E0.01719 ; perimeter
G1 X47.138 Y71.955 E0.01682 ; perimeter
G1 X47.377 Y71.618 E0.01701 ; perimeter
G1 X48.533 Y70.241 E0.07406 ; perimeter
G1 X49.647 Y71.176 E0.05995 ; perimeter
G1 X48.641 Y72.375 E0.06447 ; perimeter
G1 X48.448 Y72.662 E0.01426 ; perimeter
G1 X48.314 Y72.998 E0.01489 ; perimeter
G1 X48.248 Y73.359 E0.01513 ; perimeter
G1 X48.251 Y73.735 E0.01546 ; perimeter
G1 X48.322 Y74.112 E0.01584 ; perimeter
G1 X48.458 Y74.482 E0.01621 ; perimeter
G1 X48.653 Y74.833 E0.01654 ; perimeter
G1 X48.902 Y75.155 E0.01678 ; perimeter
G1 X49.191 Y75.435 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.56194 ; perimeter
G1 X96.677 Y99.806 E0.75974 ; perimeter
G1 X96.682 Y101.134 E0.05471 ; perimeter
G1 X85.047 Y101.134 E0.47927 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.460 Y102.997 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.094 Y102.804 F10800.000 ; move inwards before travel
G1 F8640
G1 X81.168 Y103.027 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
G1 X84.140 Y101.697 ; move to first infill point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.358 Y100.915 E0.05567 ; infill
G1 X82.673 Y100.915 E0.03448 ; infill
G1 X83.688 Y101.931 E0.07230 ; infill
G1 X83.003 Y101.931 E0.03448 ; infill
G1 X81.988 Y100.915 E0.07230 ; infill
G1 X81.303 Y100.915 E0.03448 ; infill
G1 X82.318 Y101.931 E0.07230 ; infill
G1 X81.634 Y101.931 E0.03448 ; infill
G1 X80.618 Y100.915 E0.07230 ; infill
G1 X80.256 Y100.915 E0.01821 ; infill
G1 X80.256 Y101.238 E0.01627 ; infill
G1 X80.949 Y101.931 E0.04930 ; infill
G1 X80.264 Y101.931 E0.03448 ; infill
G1 X80.055 Y101.722 E0.01483 ; infill
G1 F8640
G1 X80.264 Y101.931 E-0.06804 ; wipe and retract
G1 X80.949 Y101.931 E-0.15815 ; wipe and retract
G1 X80.256 Y101.238 E-0.22612 ; wipe and retract
G1 X80.256 Y100.915 E-0.07462 ; wipe and retract
G1 X80.618 Y100.915 E-0.08353 ; wipe and retract
G1 X81.076 Y101.373 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
G1 X55.023 Y69.277 ; move to first perimeter point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X52.500 Y67.160 E0.13568 ; perimeter
G1 X50.051 Y70.079 E0.15696 ; perimeter
G1 X49.544 Y69.653 E0.02729 ; perimeter
G1 X58.541 Y58.930 E0.57663 ; perimeter
G1 X59.048 Y59.356 E0.02729 ; perimeter
G1 X56.599 Y62.275 E0.15696 ; perimeter
G1 X59.122 Y64.392 E0.13568 ; perimeter
G1 X58.778 Y64.802 E0.02205 ; perimeter
G1 X56.255 Y62.685 E0.13568 ; perimeter
G1 X52.844 Y66.750 E0.21861 ; perimeter
G1 X55.367 Y68.867 E0.13568 ; perimeter
G1 X55.062 Y69.231 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X55.072 Y69.835 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X52.549 Y67.718 E0.13568 ; perimeter
G1 X50.100 Y70.637 E0.15696 ; perimeter
G1 X48.985 Y69.702 E0.05995 ; perimeter
G1 X58.492 Y58.372 E0.60929 ; perimeter
G1 X59.607 Y59.307 E0.05995 ; perimeter
G1 X57.158 Y62.226 E0.15696 ; perimeter
G1 X59.681 Y64.343 E0.13568 ; perimeter
G1 X58.827 Y65.360 E0.05471 ; perimeter
G1 X56.304 Y63.243 E0.13568 ; perimeter
G1 X53.403 Y66.701 E0.18596 ; perimeter
G1 X55.926 Y68.818 E0.13568 ; perimeter
G1 X55.111 Y69.789 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.801 Y69.541 F10800.000 ; move inwards before travel
G1 F8640
G1 X52.551 Y67.720 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
G1 X90.785 Y77.401 ; move to first perimeter point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.21024 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X63.275 Y58.628 E0.99294 ; perimeter
G1 X62.914 Y58.367 E0.01834 ; perimeter
G1 X62.502 Y58.151 E0.01917 ; perimeter
G1 X62.066 Y58.000 E0.01903 ; perimeter
G1 X61.615 Y57.919 E0.01884 ; perimeter
G1 X61.163 Y57.914 E0.01864 ; perimeter
G1 X60.721 Y57.988 E0.01847 ; perimeter
G1 X60.303 Y58.142 E0.01834 ; perimeter
G1 X60.089 Y58.276 E0.01039 ; perimeter
G1 X59.531 Y57.807 E0.03001 ; perimeter
G1 X59.786 Y57.622 E0.01298 ; perimeter
G1 X60.103 Y57.460 E0.01466 ; perimeter
G1 X60.459 Y57.342 E0.01545 ; perimeter
G1 X60.729 Y57.290 E0.01135 ; perimeter
G1 X61.256 Y57.262 E0.02172 ; perimeter
G1 X61.545 Y57.283 E0.01194 ; perimeter
G1 X61.973 Y57.363 E0.01795 ; perimeter
G1 X62.399 Y57.496 E0.01837 ; perimeter
G1 X62.821 Y57.684 E0.01901 ; perimeter
G1 X63.220 Y57.919 E0.01910 ; perimeter
G1 X63.615 Y58.214 E0.02032 ; perimeter
G1 X81.934 Y73.586 E0.98513 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X91.129 Y76.991 E0.21827 ; perimeter
G1 X90.824 Y77.355 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X90.834 Y77.960 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.22063 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X63.031 Y58.941 E0.99830 ; perimeter
M73 P79 R27
G1 X62.705 Y58.705 E0.01657 ; perimeter
G1 X62.344 Y58.516 E0.01678 ; perimeter
G1 X61.965 Y58.385 E0.01654 ; perimeter
G1 X61.578 Y58.315 E0.01621 ; perimeter
G1 X61.193 Y58.311 E0.01584 ; perimeter
G1 X60.823 Y58.372 E0.01546 ; perimeter
G1 X60.479 Y58.500 E0.01513 ; perimeter
G1 X60.172 Y58.691 E0.01489 ; perimeter
G1 X60.077 Y58.783 E0.00544 ; perimeter
G1 X58.944 Y57.832 E0.06089 ; perimeter
G1 X59.248 Y57.524 E0.01783 ; perimeter
G1 X59.578 Y57.283 E0.01682 ; perimeter
G1 X59.949 Y57.093 E0.01719 ; perimeter
G1 X60.359 Y56.958 E0.01777 ; perimeter
G1 X60.681 Y56.896 E0.01352 ; perimeter
G1 X61.260 Y56.864 E0.02388 ; perimeter
G1 X61.596 Y56.890 E0.01389 ; perimeter
G1 X62.069 Y56.977 E0.01982 ; perimeter
G1 X62.539 Y57.125 E0.02029 ; perimeter
G1 X63.000 Y57.330 E0.02080 ; perimeter
G1 X63.441 Y57.589 E0.02105 ; perimeter
G1 X63.861 Y57.904 E0.02164 ; perimeter
G1 X82.078 Y73.189 E0.97964 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X91.688 Y76.942 E0.24054 ; perimeter
G1 X90.873 Y77.914 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X90.548 Y77.680 F10800.000 ; move inwards before travel
G1 F8640
G1 X88.328 Y75.826 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X77.033 Y87.745 E0.08367 ; perimeter
G1 X77.377 Y87.335 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.08367 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X84.053 Y79.379 E0.08367 ; perimeter
G1 X84.397 Y78.968 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.08367 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X76.474 Y87.794 E0.08367 ; perimeter
G1 X77.328 Y86.777 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.08367 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X83.495 Y79.427 E0.08367 ; perimeter
G1 X84.348 Y78.410 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.08367 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
G1 X98.987 Y76.215 ; move to first perimeter point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.850 Y75.972 E0.04790 ; perimeter
G1 X97.851 Y75.458 E0.02117 ; perimeter
G1 X98.987 Y75.700 E0.04783 ; perimeter
G1 X98.987 Y76.155 E0.01876 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y76.698 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.452 Y76.290 E0.08130 ; perimeter
G1 X97.456 Y74.959 E0.05482 ; perimeter
G1 X99.383 Y75.377 E0.08123 ; perimeter
G1 X99.383 Y76.638 E0.05195 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y77.181 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.393 Y76.905 E0.05825 ; perimeter
G1 X97.055 Y76.607 E0.05645 ; perimeter
G1 X97.061 Y74.460 E0.08848 ; perimeter
G1 X98.273 Y74.743 E0.05124 ; perimeter
G1 X99.780 Y75.054 E0.06339 ; perimeter
G1 X99.780 Y77.121 E0.08515 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.423 Y77.000 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.393 Y76.905 E-0.32407 ; wipe and retract
G1 X97.055 Y76.607 E-0.31643 ; wipe and retract
G1 X97.057 Y76.090 E-0.11950 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
G1 X151.013 Y76.219 ; move to first perimeter point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y75.700 E0.02137 ; perimeter
G1 X152.153 Y75.457 E0.04800 ; perimeter
G1 X152.153 Y75.969 E0.02107 ; perimeter
G1 X151.072 Y76.206 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y76.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.617 Y75.377 E0.05462 ; perimeter
G1 X152.549 Y74.958 E0.08145 ; perimeter
G1 X152.549 Y76.288 E0.05479 ; perimeter
G1 X150.676 Y76.691 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y77.183 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.220 Y75.054 E0.08769 ; perimeter
G1 X151.727 Y74.743 E0.06339 ; perimeter
G1 X152.945 Y74.458 E0.05153 ; perimeter
G1 X152.945 Y76.607 E0.08852 ; perimeter
G1 X151.012 Y77.030 E0.08153 ; perimeter
G1 X150.279 Y77.171 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.396 Y76.823 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.220 Y75.054 E-0.48906 ; wipe and retract
G1 X151.370 Y74.817 E-0.27094 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X165.603 Y78.968 E0.08367 ; perimeter
G1 X165.947 Y79.379 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.08367 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X172.623 Y87.335 E0.08367 ; perimeter
G1 X172.967 Y87.745 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.08367 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X165.652 Y78.410 E0.08367 ; perimeter
G1 X166.505 Y79.427 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.08367 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X172.672 Y86.777 E0.08367 ; perimeter
G1 X173.526 Y87.794 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.08367 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
G1 X159.215 Y77.401 ; move to first perimeter point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X158.871 Y76.991 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.21827 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X186.385 Y58.214 E0.98513 ; perimeter
G1 X186.780 Y57.919 E0.02031 ; perimeter
G1 X187.179 Y57.684 E0.01910 ; perimeter
G1 X187.601 Y57.496 E0.01901 ; perimeter
G1 X188.027 Y57.363 E0.01837 ; perimeter
G1 X188.450 Y57.284 E0.01774 ; perimeter
G1 X188.869 Y57.260 E0.01730 ; perimeter
G1 X189.152 Y57.275 E0.01165 ; perimeter
G1 X189.641 Y57.372 E0.02056 ; perimeter
G1 X189.894 Y57.458 E0.01103 ; perimeter
G1 X190.214 Y57.622 E0.01480 ; perimeter
G1 X190.469 Y57.807 E0.01298 ; perimeter
G1 X189.911 Y58.276 E0.03001 ; perimeter
G1 X189.697 Y58.142 E0.01039 ; perimeter
G1 X189.279 Y57.988 E0.01834 ; perimeter
G1 X188.837 Y57.914 E0.01847 ; perimeter
G1 X188.385 Y57.919 E0.01864 ; perimeter
G1 X187.934 Y58.000 E0.01884 ; perimeter
G1 X187.498 Y58.151 E0.01903 ; perimeter
G1 X187.087 Y58.366 E0.01912 ; perimeter
G1 X186.760 Y58.600 E0.01654 ; perimeter
G1 X168.261 Y74.121 E0.99478 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X159.261 Y77.363 E0.20777 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.166 Y77.960 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X158.312 Y76.942 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.24054 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X186.139 Y57.904 E0.97964 ; perimeter
G1 X186.559 Y57.589 E0.02164 ; perimeter
G1 X187.000 Y57.330 E0.02105 ; perimeter
G1 X187.461 Y57.125 E0.02080 ; perimeter
G1 X187.931 Y56.977 E0.02029 ; perimeter
G1 X188.402 Y56.890 E0.01974 ; perimeter
G1 X188.868 Y56.863 E0.01923 ; perimeter
G1 X189.201 Y56.881 E0.01373 ; perimeter
G1 X189.744 Y56.988 E0.02283 ; perimeter
G1 X190.050 Y57.093 E0.01329 ; perimeter
G1 X190.422 Y57.283 E0.01724 ; perimeter
G1 X190.752 Y57.524 E0.01682 ; perimeter
G1 X191.056 Y57.832 E0.01783 ; perimeter
G1 X189.923 Y58.783 E0.06089 ; perimeter
G1 X189.828 Y58.691 E0.00544 ; perimeter
G1 X189.521 Y58.500 E0.01489 ; perimeter
G1 X189.177 Y58.372 E0.01513 ; perimeter
G1 X188.807 Y58.311 E0.01546 ; perimeter
G1 X188.422 Y58.315 E0.01584 ; perimeter
G1 X188.035 Y58.385 E0.01621 ; perimeter
G1 X187.656 Y58.516 E0.01654 ; perimeter
G1 X187.295 Y58.704 E0.01676 ; perimeter
G1 X187.004 Y58.914 E0.01478 ; perimeter
G1 X168.405 Y74.517 E1.00011 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X159.212 Y77.921 E0.21815 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.141 Y77.560 F10800.000 ; move inwards before travel
G1 F8640
G1 X158.312 Y76.942 E-0.30695 ; wipe and retract
M73 Q79 S28
G1 X159.815 Y75.681 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
G1 X194.977 Y69.277 ; move to first perimeter point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X194.633 Y68.867 E0.02205 ; perimeter
G1 X197.156 Y66.750 E0.13568 ; perimeter
G1 X193.745 Y62.685 E0.21861 ; perimeter
G1 X191.222 Y64.802 E0.13568 ; perimeter
G1 X190.878 Y64.392 E0.02205 ; perimeter
G1 X193.401 Y62.275 E0.13568 ; perimeter
G1 X190.952 Y59.356 E0.15696 ; perimeter
G1 X191.459 Y58.930 E0.02729 ; perimeter
G1 X200.456 Y69.653 E0.57663 ; perimeter
G1 X199.949 Y70.079 E0.02729 ; perimeter
G1 X197.500 Y67.160 E0.15696 ; perimeter
G1 X195.023 Y69.238 E0.13321 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.928 Y69.835 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X194.074 Y68.818 E0.05471 ; perimeter
G1 X196.597 Y66.701 E0.13568 ; perimeter
G1 X193.696 Y63.243 E0.18596 ; perimeter
G1 X191.173 Y65.360 E0.13568 ; perimeter
G1 X190.319 Y64.343 E0.05471 ; perimeter
G1 X192.842 Y62.226 E0.13568 ; perimeter
G1 X190.393 Y59.307 E0.15696 ; perimeter
G1 X191.508 Y58.372 E0.05995 ; perimeter
G1 X201.015 Y69.702 E0.60929 ; perimeter
G1 X199.900 Y70.637 E0.05995 ; perimeter
G1 X197.451 Y67.718 E0.15696 ; perimeter
G1 X194.974 Y69.797 E0.13321 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.973 Y69.438 F10800.000 ; move inwards before travel
G1 F8640
G1 X194.074 Y68.818 E-0.30695 ; wipe and retract
G1 X195.577 Y67.557 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.599 E0.06104 ; perimeter
G1 X170.060 Y100.599 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.06104 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.747 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X153.716 Y100.738 E0.47922 ; perimeter
G1 X153.718 Y100.203 E0.02205 ; perimeter
G1 X171.909 Y100.203 E0.74941 ; perimeter
G1 X201.075 Y75.729 E1.56846 ; perimeter
G1 X201.395 Y75.420 E0.01834 ; perimeter
G1 X201.679 Y75.051 E0.01917 ; perimeter
G1 X201.903 Y74.647 E0.01903 ; perimeter
G1 X202.061 Y74.218 E0.01884 ; perimeter
G1 X202.145 Y73.773 E0.01864 ; perimeter
G1 X202.149 Y73.325 E0.01847 ; perimeter
G1 X202.069 Y72.887 E0.01834 ; perimeter
G1 X201.904 Y72.476 E0.01826 ; perimeter
G1 X201.676 Y72.137 E0.01685 ; perimeter
G1 X200.911 Y71.225 E0.04901 ; perimeter
G1 X201.419 Y70.799 E0.02729 ; perimeter
G1 X202.309 Y71.860 E0.05707 ; perimeter
G1 X202.520 Y72.158 E0.01503 ; perimeter
G1 X202.672 Y72.468 E0.01421 ; perimeter
G1 X202.777 Y72.811 E0.01480 ; perimeter
G1 X202.819 Y73.076 E0.01103 ; perimeter
G1 X202.829 Y73.575 E0.02056 ; perimeter
G1 X202.795 Y73.855 E0.01165 ; perimeter
G1 X202.698 Y74.264 E0.01730 ; perimeter
G1 X202.547 Y74.667 E0.01774 ; perimeter
G1 X202.339 Y75.068 E0.01858 ; perimeter
G1 X202.087 Y75.442 E0.01857 ; perimeter
G1 X201.782 Y75.800 E0.01939 ; perimeter
G1 X201.423 Y76.136 E0.02025 ; perimeter
G1 X172.104 Y100.738 E1.57671 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.807 Y102.643 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.583 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X153.318 Y101.134 E0.47927 ; perimeter
G1 X153.323 Y99.806 E0.05471 ; perimeter
G1 X171.765 Y99.806 E0.75974 ; perimeter
G1 X200.809 Y75.435 E1.56194 ; perimeter
G1 X201.098 Y75.155 E0.01657 ; perimeter
G1 X201.347 Y74.833 E0.01678 ; perimeter
G1 X201.542 Y74.482 E0.01654 ; perimeter
G1 X201.678 Y74.112 E0.01621 ; perimeter
G1 X201.749 Y73.735 E0.01584 ; perimeter
G1 X201.752 Y73.359 E0.01546 ; perimeter
G1 X201.686 Y72.998 E0.01513 ; perimeter
G1 X201.552 Y72.662 E0.01489 ; perimeter
G1 X201.359 Y72.375 E0.01426 ; perimeter
G1 X200.353 Y71.176 E0.06447 ; perimeter
G1 X201.467 Y70.241 E0.05995 ; perimeter
G1 X202.623 Y71.618 E0.07406 ; perimeter
G1 X202.862 Y71.955 E0.01701 ; perimeter
G1 X203.041 Y72.322 E0.01682 ; perimeter
G1 X203.164 Y72.722 E0.01724 ; perimeter
G1 X203.214 Y73.041 E0.01329 ; perimeter
G1 X203.226 Y73.595 E0.02283 ; perimeter
G1 X203.185 Y73.925 E0.01372 ; perimeter
G1 X203.078 Y74.380 E0.01923 ; perimeter
G1 X202.910 Y74.828 E0.01974 ; perimeter
G1 X202.682 Y75.268 E0.02037 ; perimeter
G1 X202.402 Y75.683 E0.02064 ; perimeter
G1 X202.069 Y76.074 E0.02116 ; perimeter
G1 X201.686 Y76.433 E0.02161 ; perimeter
G1 X172.248 Y101.134 E1.58311 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.643 Y103.039 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.567 Y102.640 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.953 Y102.409 E-0.21581 ; wipe and retract
G1 X164.953 Y101.134 E-0.29436 ; wipe and retract
G1 X163.871 Y101.134 E-0.24983 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
G1 X165.860 Y101.722 ; move to first infill point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X166.069 Y101.931 E0.01484 ; infill
G1 X166.754 Y101.931 E0.03448 ; infill
G1 X166.061 Y101.238 E0.04930 ; infill
G1 X166.061 Y100.915 E0.01627 ; infill
G1 X166.423 Y100.915 E0.01821 ; infill
G1 X167.439 Y101.931 E0.07230 ; infill
G1 X168.124 Y101.931 E0.03448 ; infill
G1 X167.108 Y100.915 E0.07230 ; infill
G1 X167.793 Y100.915 E0.03448 ; infill
G1 X168.808 Y101.931 E0.07230 ; infill
G1 X169.493 Y101.931 E0.03448 ; infill
G1 X168.478 Y100.915 E0.07230 ; infill
G1 X169.163 Y100.915 E0.03448 ; infill
G1 X169.945 Y101.697 E0.05567 ; infill
G1 F8640
G1 X169.163 Y100.915 E-0.25535 ; wipe and retract
G1 X168.478 Y100.915 E-0.15815 ; wipe and retract
G1 X169.493 Y101.931 E-0.33164 ; wipe and retract
G1 X169.429 Y101.931 E-0.01485 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.745 E0.06104 ; perimeter
G1 X83.970 Y138.745 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.06104 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.968 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X48.292 Y114.282 E1.57671 ; perimeter
G1 X47.933 Y113.946 E0.02025 ; perimeter
G1 X47.629 Y113.590 E0.01929 ; perimeter
G1 X47.373 Y113.209 E0.01889 ; perimeter
G1 X47.168 Y112.813 E0.01837 ; perimeter
G1 X47.017 Y112.410 E0.01774 ; perimeter
G1 X46.920 Y112.002 E0.01730 ; perimeter
G1 X46.885 Y111.714 E0.01192 ; perimeter
G1 X46.885 Y111.321 E0.01621 ; perimeter
G1 X46.939 Y110.954 E0.01527 ; perimeter
G1 X47.043 Y110.614 E0.01466 ; perimeter
G1 X47.195 Y110.304 E0.01421 ; perimeter
G1 X47.406 Y110.007 E0.01503 ; perimeter
G1 X48.296 Y108.945 E0.05707 ; perimeter
G1 X48.804 Y109.371 E0.02729 ; perimeter
G1 X48.039 Y110.283 E0.04901 ; perimeter
G1 X47.811 Y110.622 E0.01685 ; perimeter
G1 X47.646 Y111.033 E0.01826 ; perimeter
G1 X47.566 Y111.471 E0.01834 ; perimeter
G1 X47.570 Y111.920 E0.01847 ; perimeter
G1 X47.654 Y112.364 E0.01864 ; perimeter
G1 X47.811 Y112.794 E0.01884 ; perimeter
G1 X48.036 Y113.197 E0.01903 ; perimeter
G1 X48.320 Y113.566 E0.01917 ; perimeter
G1 X48.640 Y113.876 E0.01834 ; perimeter
G1 X77.806 Y138.349 E1.56846 ; perimeter
G1 X95.997 Y138.349 E0.74941 ; perimeter
G1 X95.999 Y138.884 E0.02205 ; perimeter
G1 X84.366 Y138.884 E0.47922 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X84.010 Y140.747 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.132 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X48.028 Y114.579 E1.58311 ; perimeter
G1 X47.646 Y114.220 E0.02161 ; perimeter
G1 X47.313 Y113.830 E0.02112 ; perimeter
G1 X47.032 Y113.412 E0.02076 ; perimeter
G1 X46.805 Y112.975 E0.02029 ; perimeter
G1 X46.637 Y112.526 E0.01974 ; perimeter
G1 X46.529 Y112.072 E0.01923 ; perimeter
G1 X46.489 Y111.739 E0.01382 ; perimeter
G1 X46.489 Y111.292 E0.01839 ; perimeter
G1 X46.551 Y110.867 E0.01770 ; perimeter
G1 X46.673 Y110.468 E0.01719 ; perimeter
G1 X46.853 Y110.101 E0.01682 ; perimeter
G1 X47.092 Y109.764 E0.01701 ; perimeter
G1 X48.247 Y108.387 E0.07406 ; perimeter
G1 X49.362 Y109.322 E0.05995 ; perimeter
G1 X48.356 Y110.521 E0.06447 ; perimeter
G1 X48.163 Y110.809 E0.01426 ; perimeter
G1 X48.028 Y111.144 E0.01489 ; perimeter
G1 X47.962 Y111.505 E0.01513 ; perimeter
G1 X47.966 Y111.881 E0.01546 ; perimeter
G1 X48.037 Y112.259 E0.01584 ; perimeter
G1 X48.173 Y112.628 E0.01621 ; perimeter
G1 X48.368 Y112.979 E0.01654 ; perimeter
G1 X48.617 Y113.301 E0.01678 ; perimeter
G1 X48.905 Y113.581 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.56194 ; perimeter
G1 X96.392 Y137.952 E0.75974 ; perimeter
G1 X96.396 Y139.280 E0.05471 ; perimeter
G1 X84.762 Y139.280 E0.47927 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.175 Y141.143 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.809 Y140.950 F10800.000 ; move inwards before travel
G1 F8640
G1 X80.883 Y141.173 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
G1 X83.854 Y139.843 ; move to first infill point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X83.072 Y139.061 E0.05567 ; infill
G1 X82.388 Y139.061 E0.03448 ; infill
G1 X83.403 Y140.077 E0.07230 ; infill
G1 X82.718 Y140.077 E0.03448 ; infill
G1 X81.703 Y139.061 E0.07230 ; infill
G1 X81.018 Y139.061 E0.03448 ; infill
G1 X82.033 Y140.077 E0.07230 ; infill
G1 X81.348 Y140.077 E0.03448 ; infill
G1 X80.333 Y139.061 E0.07230 ; infill
G1 X79.971 Y139.061 E0.01821 ; infill
G1 X79.971 Y139.384 E0.01627 ; infill
G1 X80.663 Y140.077 E0.04930 ; infill
G1 X79.978 Y140.077 E0.03448 ; infill
G1 X79.770 Y139.868 E0.01483 ; infill
G1 F8640
G1 X79.978 Y140.077 E-0.06804 ; wipe and retract
G1 X80.663 Y140.077 E-0.15815 ; wipe and retract
G1 X79.971 Y139.384 E-0.22612 ; wipe and retract
G1 X79.971 Y139.061 E-0.07462 ; wipe and retract
G1 X80.333 Y139.061 E-0.08353 ; wipe and retract
G1 X80.791 Y139.519 E-0.14954 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
G1 X54.738 Y107.423 ; move to first perimeter point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X52.215 Y105.306 E0.13568 ; perimeter
G1 X49.766 Y108.225 E0.15696 ; perimeter
G1 X49.258 Y107.799 E0.02729 ; perimeter
G1 X58.256 Y97.076 E0.57663 ; perimeter
G1 X58.763 Y97.502 E0.02729 ; perimeter
G1 X56.314 Y100.421 E0.15696 ; perimeter
G1 X58.837 Y102.538 E0.13568 ; perimeter
G1 X58.493 Y102.948 E0.02205 ; perimeter
G1 X55.970 Y100.831 E0.13568 ; perimeter
G1 X52.559 Y104.896 E0.21861 ; perimeter
G1 X55.082 Y107.013 E0.13568 ; perimeter
G1 X54.776 Y107.377 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.787 Y107.982 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X52.264 Y105.865 E0.13568 ; perimeter
G1 X49.815 Y108.783 E0.15696 ; perimeter
G1 X48.700 Y107.848 E0.05995 ; perimeter
G1 X58.207 Y96.518 E0.60929 ; perimeter
G1 X59.322 Y97.453 E0.05995 ; perimeter
G1 X56.873 Y100.372 E0.15696 ; perimeter
G1 X59.396 Y102.489 E0.13568 ; perimeter
G1 X58.542 Y103.506 E0.05471 ; perimeter
G1 X56.019 Y101.389 E0.13568 ; perimeter
G1 X53.117 Y104.847 E0.18596 ; perimeter
G1 X55.640 Y106.964 E0.13568 ; perimeter
G1 X54.825 Y107.936 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.516 Y107.687 F10800.000 ; move inwards before travel
G1 F8640
G1 X52.266 Y105.866 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
G1 X90.500 Y115.547 ; move to first perimeter point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.21024 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X62.990 Y96.774 E0.99294 ; perimeter
G1 X62.629 Y96.513 E0.01834 ; perimeter
G1 X62.217 Y96.297 E0.01917 ; perimeter
G1 X61.780 Y96.146 E0.01903 ; perimeter
G1 X61.330 Y96.065 E0.01884 ; perimeter
G1 X60.878 Y96.060 E0.01864 ; perimeter
G1 X60.435 Y96.134 E0.01847 ; perimeter
G1 X60.018 Y96.289 E0.01834 ; perimeter
G1 X59.804 Y96.422 E0.01039 ; perimeter
G1 X59.246 Y95.953 E0.03001 ; perimeter
G1 X59.501 Y95.768 E0.01298 ; perimeter
G1 X59.817 Y95.606 E0.01466 ; perimeter
G1 X60.173 Y95.488 E0.01545 ; perimeter
G1 X60.444 Y95.437 E0.01135 ; perimeter
G1 X60.971 Y95.408 E0.02172 ; perimeter
G1 X61.260 Y95.429 E0.01194 ; perimeter
G1 X61.688 Y95.509 E0.01795 ; perimeter
G1 X62.114 Y95.642 E0.01837 ; perimeter
G1 X62.535 Y95.830 E0.01901 ; perimeter
G1 X62.935 Y96.065 E0.01910 ; perimeter
G1 X63.330 Y96.360 E0.02032 ; perimeter
G1 X81.649 Y111.732 E0.98513 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X90.844 Y115.137 E0.21827 ; perimeter
G1 X90.539 Y115.501 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X90.549 Y116.106 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.22063 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X62.746 Y97.087 E0.99830 ; perimeter
G1 X62.420 Y96.851 E0.01657 ; perimeter
G1 X62.059 Y96.662 E0.01678 ; perimeter
G1 X61.680 Y96.531 E0.01654 ; perimeter
G1 X61.293 Y96.461 E0.01621 ; perimeter
G1 X60.908 Y96.457 E0.01584 ; perimeter
G1 X60.538 Y96.519 E0.01546 ; perimeter
G1 X60.193 Y96.646 E0.01513 ; perimeter
G1 X59.887 Y96.837 E0.01489 ; perimeter
G1 X59.792 Y96.929 E0.00544 ; perimeter
G1 X58.659 Y95.979 E0.06089 ; perimeter
G1 X58.962 Y95.670 E0.01783 ; perimeter
G1 X59.292 Y95.429 E0.01682 ; perimeter
G1 X59.664 Y95.239 E0.01719 ; perimeter
G1 X60.073 Y95.104 E0.01777 ; perimeter
G1 X60.396 Y95.042 E0.01352 ; perimeter
G1 X60.975 Y95.011 E0.02388 ; perimeter
G1 X61.311 Y95.036 E0.01389 ; perimeter
G1 X61.784 Y95.124 E0.01982 ; perimeter
G1 X62.254 Y95.271 E0.02029 ; perimeter
G1 X62.715 Y95.476 E0.02080 ; perimeter
G1 X63.156 Y95.735 E0.02105 ; perimeter
G1 X63.576 Y96.050 E0.02164 ; perimeter
G1 X81.793 Y111.335 E0.97964 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X91.403 Y115.089 E0.24054 ; perimeter
G1 X90.588 Y116.060 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X90.263 Y115.827 F10800.000 ; move inwards before travel
G1 F8640
G1 X88.043 Y113.973 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X76.748 Y125.891 E0.08367 ; perimeter
G1 X77.092 Y125.481 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.08367 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X83.768 Y117.525 E0.08367 ; perimeter
G1 X84.112 Y117.115 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.08367 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X76.189 Y125.940 E0.08367 ; perimeter
G1 X77.043 Y124.923 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.08367 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X83.210 Y117.574 E0.08367 ; perimeter
G1 X84.063 Y116.556 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.08367 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
G1 X98.702 Y114.361 ; move to first perimeter point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.565 Y114.118 E0.04790 ; perimeter
G1 X97.566 Y113.604 E0.02117 ; perimeter
G1 X98.702 Y113.846 E0.04783 ; perimeter
G1 X98.702 Y114.301 E0.01876 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y114.844 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.167 Y114.436 E0.08130 ; perimeter
G1 X97.171 Y113.105 E0.05482 ; perimeter
G1 X99.098 Y113.523 E0.08123 ; perimeter
G1 X99.098 Y114.784 E0.05195 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y115.327 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.108 Y115.051 E0.05825 ; perimeter
G1 X96.770 Y114.754 E0.05645 ; perimeter
G1 X96.776 Y112.606 E0.08848 ; perimeter
G1 X97.987 Y112.889 E0.05124 ; perimeter
G1 X99.494 Y113.200 E0.06339 ; perimeter
G1 X99.494 Y115.267 E0.08515 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.138 Y115.146 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.108 Y115.051 E-0.32407 ; wipe and retract
G1 X96.770 Y114.754 E-0.31643 ; wipe and retract
G1 X96.771 Y114.236 E-0.11950 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
G1 X150.728 Y114.365 ; move to first perimeter point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y113.846 E0.02137 ; perimeter
G1 X151.868 Y113.604 E0.04800 ; perimeter
G1 X151.868 Y114.115 E0.02107 ; perimeter
G1 X150.787 Y114.352 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y114.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.332 Y113.523 E0.05462 ; perimeter
G1 X152.264 Y113.104 E0.08145 ; perimeter
G1 X152.264 Y114.434 E0.05479 ; perimeter
G1 X150.390 Y114.837 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y115.329 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.935 Y113.200 E0.08769 ; perimeter
G1 X151.442 Y112.889 E0.06339 ; perimeter
G1 X152.660 Y112.604 E0.05153 ; perimeter
G1 X152.660 Y114.753 E0.08852 ; perimeter
G1 X150.727 Y115.176 E0.08153 ; perimeter
G1 X149.994 Y115.317 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.111 Y114.969 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.935 Y113.200 E-0.48906 ; wipe and retract
G1 X151.084 Y112.963 E-0.27094 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X165.317 Y117.115 E0.08367 ; perimeter
G1 X165.662 Y117.525 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.08367 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X172.338 Y125.481 E0.08367 ; perimeter
G1 X172.682 Y125.891 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.08367 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X165.366 Y116.556 E0.08367 ; perimeter
G1 X166.220 Y117.574 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.08367 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X172.387 Y124.923 E0.08367 ; perimeter
G1 X173.240 Y125.940 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.08367 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
G1 X158.929 Y115.547 ; move to first perimeter point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X158.585 Y115.137 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.21827 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X186.100 Y96.360 E0.98513 ; perimeter
G1 X186.495 Y96.065 E0.02031 ; perimeter
G1 X186.894 Y95.830 E0.01910 ; perimeter
G1 X187.316 Y95.642 E0.01901 ; perimeter
G1 X187.741 Y95.509 E0.01837 ; perimeter
G1 X188.165 Y95.430 E0.01774 ; perimeter
G1 X188.584 Y95.406 E0.01730 ; perimeter
G1 X188.866 Y95.421 E0.01165 ; perimeter
G1 X189.356 Y95.518 E0.02056 ; perimeter
G1 X189.609 Y95.605 E0.01103 ; perimeter
G1 X189.929 Y95.768 E0.01480 ; perimeter
G1 X190.184 Y95.953 E0.01298 ; perimeter
G1 X189.626 Y96.422 E0.03001 ; perimeter
G1 X189.412 Y96.289 E0.01039 ; perimeter
G1 X188.994 Y96.134 E0.01834 ; perimeter
G1 X188.552 Y96.060 E0.01847 ; perimeter
G1 X188.099 Y96.065 E0.01864 ; perimeter
G1 X187.649 Y96.146 E0.01884 ; perimeter
G1 X187.213 Y96.297 E0.01903 ; perimeter
G1 X186.801 Y96.512 E0.01912 ; perimeter
G1 X186.475 Y96.746 E0.01654 ; perimeter
G1 X167.976 Y112.267 E0.99478 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X158.975 Y115.509 E0.20777 ; perimeter
M204 S1000 ; adjust acceleration
G1 X158.881 Y116.106 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X158.027 Y115.089 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.24054 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X185.853 Y96.050 E0.97964 ; perimeter
G1 X186.274 Y95.735 E0.02164 ; perimeter
G1 X186.714 Y95.476 E0.02105 ; perimeter
G1 X187.176 Y95.271 E0.02080 ; perimeter
G1 X187.646 Y95.124 E0.02029 ; perimeter
G1 X188.117 Y95.036 E0.01974 ; perimeter
G1 X188.583 Y95.009 E0.01923 ; perimeter
G1 X188.916 Y95.027 E0.01373 ; perimeter
G1 X189.459 Y95.134 E0.02283 ; perimeter
G1 X189.764 Y95.239 E0.01329 ; perimeter
G1 X190.137 Y95.429 E0.01724 ; perimeter
G1 X190.467 Y95.670 E0.01682 ; perimeter
G1 X190.770 Y95.979 E0.01783 ; perimeter
G1 X189.638 Y96.929 E0.06089 ; perimeter
G1 X189.543 Y96.837 E0.00544 ; perimeter
G1 X189.236 Y96.646 E0.01489 ; perimeter
G1 X188.892 Y96.519 E0.01513 ; perimeter
G1 X188.521 Y96.457 E0.01546 ; perimeter
G1 X188.137 Y96.461 E0.01584 ; perimeter
G1 X187.750 Y96.531 E0.01621 ; perimeter
G1 X187.370 Y96.662 E0.01654 ; perimeter
G1 X187.010 Y96.851 E0.01676 ; perimeter
G1 X186.719 Y97.060 E0.01478 ; perimeter
G1 X168.120 Y112.663 E1.00011 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X158.927 Y116.067 E0.21815 ; perimeter
M204 S1000 ; adjust acceleration
G1 X158.856 Y115.707 F10800.000 ; move inwards before travel
G1 F8640
G1 X158.027 Y115.089 E-0.30695 ; wipe and retract
G1 X159.530 Y113.827 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
G1 X194.692 Y107.423 ; move to first perimeter point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X194.348 Y107.013 E0.02205 ; perimeter
G1 X196.871 Y104.896 E0.13568 ; perimeter
G1 X193.460 Y100.831 E0.21861 ; perimeter
G1 X190.937 Y102.948 E0.13568 ; perimeter
G1 X190.592 Y102.538 E0.02205 ; perimeter
G1 X193.115 Y100.421 E0.13568 ; perimeter
G1 X190.666 Y97.502 E0.15696 ; perimeter
G1 X191.174 Y97.076 E0.02729 ; perimeter
G1 X200.171 Y107.799 E0.57663 ; perimeter
G1 X199.664 Y108.225 E0.02729 ; perimeter
G1 X197.215 Y105.306 E0.15696 ; perimeter
G1 X194.738 Y107.385 E0.13321 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.643 Y107.982 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X193.789 Y106.964 E0.05471 ; perimeter
G1 X196.312 Y104.847 E0.13568 ; perimeter
G1 X193.411 Y101.389 E0.18596 ; perimeter
G1 X190.888 Y103.506 E0.13568 ; perimeter
G1 X190.034 Y102.489 E0.05471 ; perimeter
G1 X192.557 Y100.372 E0.13568 ; perimeter
G1 X190.108 Y97.453 E0.15696 ; perimeter
G1 X191.223 Y96.518 E0.05995 ; perimeter
G1 X200.730 Y107.848 E0.60929 ; perimeter
G1 X199.615 Y108.783 E0.05995 ; perimeter
G1 X197.166 Y105.865 E0.15696 ; perimeter
G1 X194.689 Y107.943 E0.13321 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.687 Y107.584 F10800.000 ; move inwards before travel
G1 F8640
G1 X193.789 Y106.964 E-0.30695 ; wipe and retract
G1 X195.292 Y105.703 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.745 E0.06104 ; perimeter
G1 X169.775 Y138.745 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.06104 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.462 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X153.431 Y138.884 E0.47922 ; perimeter
G1 X153.433 Y138.349 E0.02205 ; perimeter
G1 X171.624 Y138.349 E0.74941 ; perimeter
G1 X200.790 Y113.876 E1.56846 ; perimeter
G1 X201.110 Y113.566 E0.01834 ; perimeter
G1 X201.394 Y113.197 E0.01917 ; perimeter
G1 X201.618 Y112.794 E0.01903 ; perimeter
G1 X201.776 Y112.364 E0.01884 ; perimeter
G1 X201.860 Y111.920 E0.01864 ; perimeter
G1 X201.864 Y111.471 E0.01847 ; perimeter
G1 X201.784 Y111.033 E0.01834 ; perimeter
G1 X201.619 Y110.622 E0.01826 ; perimeter
G1 X201.391 Y110.283 E0.01685 ; perimeter
G1 X200.626 Y109.371 E0.04901 ; perimeter
G1 X201.133 Y108.945 E0.02729 ; perimeter
G1 X202.024 Y110.007 E0.05707 ; perimeter
G1 X202.235 Y110.304 E0.01503 ; perimeter
G1 X202.386 Y110.614 E0.01421 ; perimeter
G1 X202.492 Y110.957 E0.01480 ; perimeter
G1 X202.533 Y111.222 E0.01103 ; perimeter
G1 X202.544 Y111.721 E0.02056 ; perimeter
G1 X202.509 Y112.002 E0.01165 ; perimeter
G1 X202.412 Y112.410 E0.01730 ; perimeter
G1 X202.262 Y112.813 E0.01774 ; perimeter
G1 X202.054 Y113.214 E0.01858 ; perimeter
G1 X201.802 Y113.588 E0.01857 ; perimeter
G1 X201.497 Y113.946 E0.01939 ; perimeter
G1 X201.138 Y114.282 E0.02025 ; perimeter
G1 X171.819 Y138.884 E1.57671 ; perimeter
M73 P80 R26
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.522 Y140.789 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.298 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X153.033 Y139.280 E0.47927 ; perimeter
G1 X153.037 Y137.952 E0.05471 ; perimeter
G1 X171.480 Y137.952 E0.75974 ; perimeter
G1 X200.524 Y113.581 E1.56194 ; perimeter
G1 X200.813 Y113.301 E0.01657 ; perimeter
G1 X201.062 Y112.979 E0.01678 ; perimeter
G1 X201.257 Y112.628 E0.01654 ; perimeter
G1 X201.392 Y112.258 E0.01621 ; perimeter
G1 X201.464 Y111.881 E0.01584 ; perimeter
G1 X201.467 Y111.505 E0.01546 ; perimeter
G1 X201.401 Y111.144 E0.01513 ; perimeter
G1 X201.266 Y110.809 E0.01489 ; perimeter
G1 X201.073 Y110.521 E0.01426 ; perimeter
G1 X200.067 Y109.322 E0.06447 ; perimeter
G1 X201.182 Y108.387 E0.05995 ; perimeter
G1 X202.338 Y109.764 E0.07406 ; perimeter
G1 X202.577 Y110.101 E0.01701 ; perimeter
G1 X202.756 Y110.468 E0.01682 ; perimeter
G1 X202.879 Y110.868 E0.01724 ; perimeter
G1 X202.929 Y111.187 E0.01329 ; perimeter
G1 X202.940 Y111.741 E0.02283 ; perimeter
G1 X202.900 Y112.072 E0.01372 ; perimeter
G1 X202.792 Y112.526 E0.01923 ; perimeter
G1 X202.624 Y112.975 E0.01974 ; perimeter
G1 X202.397 Y113.414 E0.02037 ; perimeter
G1 X202.117 Y113.829 E0.02064 ; perimeter
G1 X201.784 Y114.220 E0.02116 ; perimeter
G1 X201.401 Y114.579 E0.02161 ; perimeter
G1 X171.963 Y139.280 E1.58311 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.358 Y141.185 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.282 Y140.786 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.667 Y140.555 E-0.21581 ; wipe and retract
G1 X164.667 Y139.280 E-0.29436 ; wipe and retract
G1 X163.585 Y139.280 E-0.24983 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
G1 X165.575 Y139.868 ; move to first infill point
G1 Z17.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7433.13
G1 X165.784 Y140.077 E0.01484 ; infill
G1 X166.469 Y140.077 E0.03448 ; infill
G1 X165.776 Y139.384 E0.04930 ; infill
G1 X165.776 Y139.061 E0.01627 ; infill
G1 X166.138 Y139.061 E0.01821 ; infill
G1 X167.153 Y140.077 E0.07230 ; infill
G1 X167.838 Y140.077 E0.03448 ; infill
G1 X166.823 Y139.061 E0.07230 ; infill
G1 X167.508 Y139.061 E0.03448 ; infill
G1 X168.523 Y140.077 E0.07230 ; infill
G1 X169.208 Y140.077 E0.03448 ; infill
G1 X168.193 Y139.061 E0.07230 ; infill
G1 X168.878 Y139.061 E0.03448 ; infill
G1 X169.660 Y139.843 E0.05567 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;18


G1 F8640
G1 X168.878 Y139.061 E-0.25535 ; wipe and retract
G1 X168.193 Y139.061 E-0.15815 ; wipe and retract
G1 X169.208 Y140.077 E-0.33164 ; wipe and retract
G1 X169.144 Y140.077 E-0.01485 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;18
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.694 E0.05713 ; perimeter
G1 X84.255 Y100.694 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.05713 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.253 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X48.443 Y76.024 E1.58392 ; perimeter
G1 X48.085 Y75.688 E0.02019 ; perimeter
G1 X47.782 Y75.333 E0.01923 ; perimeter
G1 X47.526 Y74.954 E0.01884 ; perimeter
G1 X47.321 Y74.559 E0.01832 ; perimeter
G1 X47.170 Y74.157 E0.01770 ; perimeter
G1 X47.072 Y73.751 E0.01723 ; perimeter
G1 X47.036 Y73.449 E0.01249 ; perimeter
G1 X47.037 Y73.058 E0.01613 ; perimeter
G1 X47.091 Y72.693 E0.01522 ; perimeter
G1 X47.195 Y72.354 E0.01461 ; perimeter
G1 X47.346 Y72.045 E0.01417 ; perimeter
G1 X47.557 Y71.748 E0.01498 ; perimeter
G1 X48.447 Y70.687 E0.05707 ; perimeter
G1 X48.955 Y71.113 E0.02729 ; perimeter
G1 X48.190 Y72.024 E0.04901 ; perimeter
G1 X47.962 Y72.363 E0.01685 ; perimeter
G1 X47.797 Y72.775 E0.01826 ; perimeter
G1 X47.717 Y73.213 E0.01834 ; perimeter
G1 X47.721 Y73.661 E0.01847 ; perimeter
G1 X47.805 Y74.106 E0.01864 ; perimeter
G1 X47.962 Y74.535 E0.01884 ; perimeter
G1 X48.187 Y74.939 E0.01903 ; perimeter
G1 X48.471 Y75.307 E0.01917 ; perimeter
G1 X48.791 Y75.617 E0.01834 ; perimeter
G1 X78.013 Y100.137 E1.57148 ; perimeter
G1 X77.878 Y100.298 E0.00863 ; perimeter
G1 X96.043 Y100.298 E0.74833 ; perimeter
G1 X96.046 Y100.738 E0.01814 ; perimeter
G1 X84.651 Y100.738 E0.46941 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.296 Y102.600 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.417 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X48.179 Y76.320 E1.59032 ; perimeter
G1 X47.798 Y75.962 E0.02155 ; perimeter
G1 X47.466 Y75.574 E0.02106 ; perimeter
G1 X47.185 Y75.157 E0.02070 ; perimeter
G1 X46.958 Y74.721 E0.02024 ; perimeter
G1 X46.790 Y74.274 E0.01970 ; perimeter
G1 X46.682 Y73.821 E0.01918 ; perimeter
G1 X46.639 Y73.473 E0.01443 ; perimeter
G1 X46.640 Y73.028 E0.01832 ; perimeter
G1 X46.703 Y72.605 E0.01764 ; perimeter
G1 X46.825 Y72.207 E0.01714 ; perimeter
G1 X47.005 Y71.841 E0.01678 ; perimeter
G1 X47.243 Y71.506 E0.01696 ; perimeter
G1 X48.399 Y70.128 E0.07406 ; perimeter
G1 X49.513 Y71.064 E0.05995 ; perimeter
G1 X48.507 Y72.263 E0.06447 ; perimeter
G1 X48.314 Y72.550 E0.01426 ; perimeter
G1 X48.180 Y72.885 E0.01489 ; perimeter
G1 X48.114 Y73.247 E0.01513 ; perimeter
G1 X48.117 Y73.622 E0.01546 ; perimeter
G1 X48.188 Y74.000 E0.01584 ; perimeter
G1 X48.324 Y74.369 E0.01621 ; perimeter
G1 X48.519 Y74.720 E0.01654 ; perimeter
G1 X48.768 Y75.043 E0.01678 ; perimeter
G1 X49.056 Y75.322 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.56915 ; perimeter
G1 X78.808 Y99.806 E0.02359 ; perimeter
G1 X78.728 Y99.901 E0.00511 ; perimeter
G1 X96.438 Y99.901 E0.72956 ; perimeter
G1 X96.444 Y101.134 E0.05080 ; perimeter
G1 X85.047 Y101.134 E0.46949 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.460 Y102.997 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.094 Y102.804 F10800.000 ; move inwards before travel
G1 F8640
G1 X81.168 Y103.027 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
G1 X83.736 Y102.131 ; move to first infill point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7564.28
G1 X83.939 Y101.929 E0.01417 ; infill
G1 X83.939 Y101.256 E0.03329 ; infill
G1 X83.264 Y101.931 E0.04720 ; infill
G1 X82.591 Y101.931 E0.03329 ; infill
G1 X83.512 Y101.010 E0.06440 ; infill
G1 X82.838 Y101.010 E0.03329 ; infill
G1 X81.918 Y101.931 E0.06440 ; infill
G1 X81.245 Y101.931 E0.03329 ; infill
G1 X82.165 Y101.010 E0.06440 ; infill
G1 X81.492 Y101.010 E0.03329 ; infill
G1 X80.572 Y101.931 E0.06440 ; infill
G1 X80.256 Y101.931 E0.01561 ; infill
G1 X80.256 Y101.573 E0.01768 ; infill
G1 X81.020 Y100.809 E0.05345 ; infill
G1 F8640
G1 X80.256 Y101.573 E-0.24949 ; wipe and retract
G1 X80.256 Y101.931 E-0.08253 ; wipe and retract
G1 X80.572 Y101.931 E-0.07288 ; wipe and retract
G1 X81.492 Y101.010 E-0.30062 ; wipe and retract
G1 X81.728 Y101.010 E-0.05448 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
G1 X54.884 Y69.160 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X52.366 Y67.047 E0.13541 ; perimeter
G1 X49.917 Y69.966 E0.15696 ; perimeter
G1 X49.409 Y69.540 E0.02729 ; perimeter
G1 X58.407 Y58.818 E0.57663 ; perimeter
G1 X58.914 Y59.244 E0.02729 ; perimeter
G1 X56.465 Y62.162 E0.15696 ; perimeter
G1 X58.983 Y64.275 E0.13541 ; perimeter
G1 X58.639 Y64.685 E0.02205 ; perimeter
G1 X56.121 Y62.572 E0.13541 ; perimeter
G1 X52.710 Y66.637 E0.21861 ; perimeter
M73 Q80 S27
G1 X55.228 Y68.750 E0.13541 ; perimeter
G1 X54.923 Y69.114 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.933 Y69.719 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X52.415 Y67.606 E0.13541 ; perimeter
G1 X49.966 Y70.524 E0.15696 ; perimeter
G1 X48.851 Y69.589 E0.05995 ; perimeter
G1 X58.358 Y58.259 E0.60929 ; perimeter
G1 X59.473 Y59.195 E0.05995 ; perimeter
G1 X57.024 Y62.113 E0.15696 ; perimeter
G1 X59.542 Y64.226 E0.13541 ; perimeter
G1 X58.688 Y65.243 E0.05471 ; perimeter
G1 X56.170 Y63.131 E0.13541 ; perimeter
G1 X53.268 Y66.589 E0.18596 ; perimeter
G1 X55.786 Y68.701 E0.13541 ; perimeter
G1 X54.971 Y69.673 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.662 Y69.425 F10800.000 ; move inwards before travel
G1 F8640
G1 X52.415 Y67.606 E-0.75909 ; wipe and retract
G1 X52.412 Y67.609 E-0.00091 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
G1 X90.594 Y77.241 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.19994 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X63.141 Y58.515 E1.00015 ; perimeter
G1 X62.780 Y58.254 E0.01834 ; perimeter
G1 X62.368 Y58.038 E0.01917 ; perimeter
G1 X61.931 Y57.887 E0.01903 ; perimeter
G1 X61.481 Y57.807 E0.01884 ; perimeter
G1 X61.029 Y57.801 E0.01864 ; perimeter
G1 X60.587 Y57.875 E0.01847 ; perimeter
G1 X60.169 Y58.030 E0.01834 ; perimeter
G1 X59.955 Y58.163 E0.01039 ; perimeter
G1 X59.397 Y57.695 E0.03001 ; perimeter
G1 X59.650 Y57.510 E0.01290 ; perimeter
G1 X59.966 Y57.349 E0.01461 ; perimeter
G1 X60.320 Y57.231 E0.01537 ; perimeter
G1 X60.604 Y57.176 E0.01194 ; perimeter
G1 X61.113 Y57.149 E0.02098 ; perimeter
G1 X61.417 Y57.172 E0.01258 ; perimeter
G1 X61.844 Y57.251 E0.01789 ; perimeter
G1 X62.269 Y57.385 E0.01832 ; perimeter
G1 X62.689 Y57.572 E0.01897 ; perimeter
G1 X63.087 Y57.807 E0.01905 ; perimeter
G1 X63.481 Y58.102 E0.02025 ; perimeter
G1 X81.934 Y73.586 E0.99235 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.938 Y76.831 E0.20797 ; perimeter
G1 X90.632 Y77.195 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X90.643 Y77.799 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.21033 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X62.897 Y58.828 E1.00551 ; perimeter
G1 X62.571 Y58.592 E0.01657 ; perimeter
G1 X62.210 Y58.403 E0.01678 ; perimeter
G1 X61.831 Y58.272 E0.01654 ; perimeter
G1 X61.444 Y58.203 E0.01621 ; perimeter
G1 X61.059 Y58.198 E0.01584 ; perimeter
G1 X60.689 Y58.260 E0.01546 ; perimeter
G1 X60.345 Y58.388 E0.01513 ; perimeter
G1 X60.038 Y58.579 E0.01489 ; perimeter
G1 X59.943 Y58.670 E0.00544 ; perimeter
G1 X58.810 Y57.720 E0.06089 ; perimeter
G1 X59.113 Y57.412 E0.01778 ; perimeter
G1 X59.442 Y57.172 E0.01678 ; perimeter
G1 X59.812 Y56.982 E0.01714 ; perimeter
G1 X60.220 Y56.846 E0.01770 ; perimeter
G1 X60.556 Y56.782 E0.01412 ; perimeter
G1 X61.117 Y56.752 E0.02314 ; perimeter
G1 X61.469 Y56.778 E0.01454 ; perimeter
G1 X61.940 Y56.866 E0.01976 ; perimeter
G1 X62.409 Y57.014 E0.02024 ; perimeter
G1 X62.869 Y57.219 E0.02075 ; perimeter
G1 X63.308 Y57.477 E0.02099 ; perimeter
G1 X63.727 Y57.791 E0.02157 ; perimeter
G1 X82.078 Y73.189 E0.98685 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X91.496 Y76.782 E0.23024 ; perimeter
G1 X90.681 Y77.753 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X90.357 Y77.519 F10800.000 ; move inwards before travel
G1 F8640
G1 X88.135 Y75.667 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X77.095 Y87.797 E0.08033 ; perimeter
G1 X77.439 Y87.387 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.08033 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X84.115 Y79.431 E0.08033 ; perimeter
G1 X84.460 Y79.021 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.08033 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X76.537 Y87.846 E0.08033 ; perimeter
G1 X77.390 Y86.829 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.08033 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X83.557 Y79.480 E0.08033 ; perimeter
G1 X84.411 Y78.462 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.08033 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
G1 X98.987 Y76.219 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.850 Y75.970 E0.04793 ; perimeter
G1 X97.852 Y75.459 E0.02104 ; perimeter
G1 X98.987 Y75.700 E0.04778 ; perimeter
G1 X98.987 Y76.159 E0.01891 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y76.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.453 Y76.288 E0.08134 ; perimeter
G1 X97.458 Y74.960 E0.05474 ; perimeter
G1 X99.383 Y75.377 E0.08116 ; perimeter
G1 X99.383 Y76.643 E0.05215 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y77.183 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.988 Y77.030 E0.03321 ; perimeter
G1 X97.055 Y76.607 E0.08150 ; perimeter
G1 X97.063 Y74.460 E0.08843 ; perimeter
G1 X98.246 Y74.737 E0.05002 ; perimeter
G1 X99.780 Y75.054 E0.06453 ; perimeter
G1 X99.780 Y77.123 E0.08522 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.422 Y77.004 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.988 Y77.030 E-0.18405 ; wipe and retract
G1 X97.055 Y76.607 E-0.45683 ; wipe and retract
G1 X97.057 Y76.091 E-0.11912 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
G1 X151.013 Y76.219 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y75.700 E0.02138 ; perimeter
G1 X152.153 Y75.458 E0.04799 ; perimeter
G1 X152.153 Y75.969 E0.02106 ; perimeter
G1 X151.072 Y76.206 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y76.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.617 Y75.377 E0.05462 ; perimeter
G1 X152.549 Y74.958 E0.08145 ; perimeter
G1 X152.549 Y76.288 E0.05479 ; perimeter
G1 X150.676 Y76.691 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y77.183 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.220 Y75.054 E0.08769 ; perimeter
G1 X151.754 Y74.737 E0.06453 ; perimeter
G1 X152.945 Y74.458 E0.05039 ; perimeter
G1 X152.945 Y76.607 E0.08851 ; perimeter
G1 X151.012 Y77.030 E0.08153 ; perimeter
G1 X150.279 Y77.171 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.396 Y76.823 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.220 Y75.054 E-0.48908 ; wipe and retract
G1 X151.369 Y74.816 E-0.27092 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X165.540 Y79.021 E0.08033 ; perimeter
G1 X165.885 Y79.431 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.08033 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X172.561 Y87.387 E0.08033 ; perimeter
G1 X172.905 Y87.797 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.08033 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X165.589 Y78.462 E0.08033 ; perimeter
G1 X166.443 Y79.480 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.08033 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X172.610 Y86.829 E0.08033 ; perimeter
G1 X173.463 Y87.846 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.08033 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
G1 X159.406 Y77.241 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.062 Y76.831 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.20797 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X186.519 Y58.102 E0.99235 ; perimeter
G1 X186.913 Y57.807 E0.02025 ; perimeter
G1 X187.311 Y57.572 E0.01905 ; perimeter
G1 X187.731 Y57.385 E0.01897 ; perimeter
G1 X188.156 Y57.251 E0.01832 ; perimeter
G1 X188.578 Y57.172 E0.01770 ; perimeter
G1 X188.996 Y57.147 E0.01723 ; perimeter
G1 X189.293 Y57.163 E0.01227 ; perimeter
G1 X189.766 Y57.256 E0.01985 ; perimeter
G1 X190.032 Y57.347 E0.01159 ; perimeter
G1 X190.350 Y57.510 E0.01473 ; perimeter
G1 X190.603 Y57.695 E0.01290 ; perimeter
G1 X190.045 Y58.163 E0.03001 ; perimeter
G1 X189.831 Y58.030 E0.01039 ; perimeter
G1 X189.413 Y57.875 E0.01834 ; perimeter
G1 X188.971 Y57.801 E0.01847 ; perimeter
G1 X188.519 Y57.807 E0.01864 ; perimeter
G1 X188.069 Y57.887 E0.01884 ; perimeter
G1 X187.632 Y58.038 E0.01903 ; perimeter
G1 X187.221 Y58.254 E0.01913 ; perimeter
G1 X186.891 Y58.491 E0.01673 ; perimeter
G1 X168.261 Y74.121 E1.00180 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X159.452 Y77.202 E0.19747 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.357 Y77.799 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X158.504 Y76.782 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.23024 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X186.273 Y57.791 E0.98685 ; perimeter
G1 X186.692 Y57.477 E0.02157 ; perimeter
G1 X187.131 Y57.219 E0.02099 ; perimeter
G1 X187.591 Y57.014 E0.02075 ; perimeter
G1 X188.060 Y56.866 E0.02024 ; perimeter
G1 X188.529 Y56.778 E0.01970 ; perimeter
G1 X188.994 Y56.750 E0.01918 ; perimeter
G1 X189.342 Y56.769 E0.01435 ; perimeter
G1 X189.869 Y56.872 E0.02212 ; perimeter
G1 X190.187 Y56.982 E0.01387 ; perimeter
G1 X190.558 Y57.172 E0.01718 ; perimeter
G1 X190.887 Y57.412 E0.01678 ; perimeter
G1 X191.190 Y57.720 E0.01778 ; perimeter
G1 X190.057 Y58.670 E0.06089 ; perimeter
G1 X189.962 Y58.579 E0.00544 ; perimeter
G1 X189.655 Y58.388 E0.01489 ; perimeter
G1 X189.311 Y58.260 E0.01513 ; perimeter
G1 X188.941 Y58.198 E0.01546 ; perimeter
G1 X188.556 Y58.203 E0.01584 ; perimeter
G1 X188.169 Y58.272 E0.01621 ; perimeter
G1 X187.790 Y58.403 E0.01654 ; perimeter
G1 X187.429 Y58.592 E0.01676 ; perimeter
G1 X187.134 Y58.804 E0.01497 ; perimeter
G1 X168.405 Y74.517 E1.00713 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X159.403 Y77.760 E0.20785 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.334 Y77.400 F10800.000 ; move inwards before travel
G1 F8640
G1 X158.504 Y76.782 E-0.30695 ; wipe and retract
G1 X160.007 Y75.520 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
G1 X195.116 Y69.160 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X194.772 Y68.750 E0.02205 ; perimeter
G1 X197.290 Y66.637 E0.13541 ; perimeter
G1 X193.879 Y62.572 E0.21861 ; perimeter
G1 X191.361 Y64.685 E0.13541 ; perimeter
G1 X191.017 Y64.275 E0.02205 ; perimeter
G1 X193.535 Y62.162 E0.13541 ; perimeter
G1 X191.086 Y59.244 E0.15696 ; perimeter
G1 X191.593 Y58.818 E0.02730 ; perimeter
G1 X200.591 Y69.540 E0.57663 ; perimeter
G1 X200.083 Y69.966 E0.02730 ; perimeter
G1 X197.634 Y67.047 E0.15696 ; perimeter
G1 X195.162 Y69.122 E0.13294 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.067 Y69.719 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X194.214 Y68.701 E0.05471 ; perimeter
G1 X196.732 Y66.589 E0.13541 ; perimeter
G1 X193.830 Y63.131 E0.18596 ; perimeter
G1 X191.312 Y65.243 E0.13541 ; perimeter
G1 X190.458 Y64.226 E0.05471 ; perimeter
G1 X192.976 Y62.113 E0.13541 ; perimeter
G1 X190.527 Y59.195 E0.15696 ; perimeter
G1 X191.642 Y58.259 E0.05995 ; perimeter
G1 X201.149 Y69.589 E0.60929 ; perimeter
G1 X200.034 Y70.524 E0.05995 ; perimeter
G1 X197.585 Y67.606 E0.15696 ; perimeter
G1 X195.113 Y69.680 E0.13294 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.112 Y69.321 F10800.000 ; move inwards before travel
G1 F8640
G1 X194.214 Y68.701 E-0.30695 ; wipe and retract
G1 X195.717 Y67.440 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.694 E0.05713 ; perimeter
G1 X170.060 Y100.694 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.05713 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.747 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X153.954 Y100.738 E0.46941 ; perimeter
G1 X153.957 Y100.298 E0.01814 ; perimeter
G1 X172.122 Y100.298 E0.74833 ; perimeter
G1 X171.987 Y100.137 E0.00863 ; perimeter
G1 X201.209 Y75.617 E1.57148 ; perimeter
G1 X201.529 Y75.307 E0.01834 ; perimeter
G1 X201.813 Y74.939 E0.01917 ; perimeter
G1 X202.038 Y74.535 E0.01903 ; perimeter
G1 X202.195 Y74.106 E0.01884 ; perimeter
G1 X202.279 Y73.661 E0.01864 ; perimeter
G1 X202.283 Y73.213 E0.01847 ; perimeter
G1 X202.203 Y72.775 E0.01834 ; perimeter
G1 X202.038 Y72.363 E0.01826 ; perimeter
G1 X201.810 Y72.024 E0.01685 ; perimeter
G1 X201.045 Y71.113 E0.04901 ; perimeter
G1 X201.553 Y70.687 E0.02729 ; perimeter
G1 X202.314 Y71.594 E0.04880 ; perimeter
G1 X202.657 Y72.052 E0.02357 ; perimeter
G1 X202.805 Y72.354 E0.01383 ; perimeter
G1 X202.910 Y72.695 E0.01473 ; perimeter
G1 X202.954 Y72.973 E0.01159 ; perimeter
G1 X202.964 Y73.455 E0.01985 ; perimeter
G1 X202.928 Y73.751 E0.01227 ; perimeter
G1 X202.830 Y74.157 E0.01723 ; perimeter
G1 X202.681 Y74.553 E0.01742 ; perimeter
G1 X202.395 Y75.075 E0.02452 ; perimeter
G1 X202.219 Y75.331 E0.01281 ; perimeter
G1 X201.915 Y75.688 E0.01932 ; perimeter
G1 X201.557 Y76.024 E0.02019 ; perimeter
G1 X172.104 Y100.738 E1.58392 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.807 Y102.643 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.583 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X153.556 Y101.134 E0.46949 ; perimeter
G1 X153.562 Y99.901 E0.05080 ; perimeter
G1 X171.272 Y99.901 E0.72956 ; perimeter
G1 X171.192 Y99.806 E0.00511 ; perimeter
G1 X171.765 Y99.806 E0.02359 ; perimeter
G1 X200.944 Y75.322 E1.56915 ; perimeter
G1 X201.232 Y75.043 E0.01657 ; perimeter
G1 X201.481 Y74.720 E0.01678 ; perimeter
G1 X201.676 Y74.369 E0.01654 ; perimeter
G1 X201.812 Y74.000 E0.01621 ; perimeter
G1 X201.883 Y73.622 E0.01584 ; perimeter
G1 X201.886 Y73.247 E0.01546 ; perimeter
G1 X201.820 Y72.885 E0.01513 ; perimeter
G1 X201.686 Y72.550 E0.01489 ; perimeter
G1 X201.493 Y72.263 E0.01426 ; perimeter
G1 X200.487 Y71.064 E0.06447 ; perimeter
G1 X201.601 Y70.128 E0.05995 ; perimeter
G1 X202.625 Y71.348 E0.06557 ; perimeter
G1 X202.997 Y71.844 E0.02556 ; perimeter
G1 X203.175 Y72.207 E0.01665 ; perimeter
G1 X203.297 Y72.606 E0.01718 ; perimeter
G1 X203.350 Y72.938 E0.01387 ; perimeter
G1 X203.360 Y73.475 E0.02212 ; perimeter
G1 X203.318 Y73.821 E0.01435 ; perimeter
G1 X203.210 Y74.274 E0.01918 ; perimeter
G1 X203.042 Y74.719 E0.01959 ; perimeter
G1 X202.733 Y75.283 E0.02650 ; perimeter
G1 X202.534 Y75.573 E0.01449 ; perimeter
G1 X202.202 Y75.962 E0.02109 ; perimeter
G1 X201.821 Y76.320 E0.02155 ; perimeter
G1 X172.248 Y101.134 E1.59032 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.643 Y103.039 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.567 Y102.640 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.953 Y102.409 E-0.21581 ; wipe and retract
G1 X164.953 Y101.134 E-0.29436 ; wipe and retract
G1 X163.871 Y101.134 E-0.24983 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
G1 X166.825 Y100.809 ; move to first infill point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7564.28
G1 X166.061 Y101.573 E0.05345 ; infill
G1 X166.061 Y101.931 E0.01768 ; infill
G1 X166.377 Y101.931 E0.01561 ; infill
G1 X167.297 Y101.010 E0.06440 ; infill
G1 X167.971 Y101.010 E0.03329 ; infill
G1 X167.050 Y101.931 E0.06440 ; infill
G1 X167.723 Y101.931 E0.03329 ; infill
G1 X168.644 Y101.010 E0.06440 ; infill
G1 X169.317 Y101.010 E0.03329 ; infill
G1 X168.396 Y101.931 E0.06440 ; infill
G1 X169.069 Y101.931 E0.03329 ; infill
G1 X169.744 Y101.256 E0.04720 ; infill
G1 X169.744 Y101.929 E0.03329 ; infill
G1 X169.541 Y102.131 E0.01417 ; infill
G1 F8640
G1 X169.744 Y101.929 E-0.06615 ; wipe and retract
G1 X169.744 Y101.256 E-0.15541 ; wipe and retract
G1 X169.069 Y101.931 E-0.22035 ; wipe and retract
G1 X168.396 Y101.931 E-0.15541 ; wipe and retract
G1 X168.894 Y101.432 E-0.16268 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y138.840 E0.05713 ; perimeter
G1 X83.970 Y138.840 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.05713 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.968 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X48.157 Y114.170 E1.58392 ; perimeter
G1 X47.800 Y113.834 E0.02019 ; perimeter
G1 X47.497 Y113.479 E0.01923 ; perimeter
G1 X47.241 Y113.100 E0.01884 ; perimeter
G1 X47.036 Y112.706 E0.01832 ; perimeter
G1 X46.885 Y112.303 E0.01770 ; perimeter
G1 X46.787 Y111.897 E0.01723 ; perimeter
G1 X46.751 Y111.596 E0.01249 ; perimeter
G1 X46.751 Y111.204 E0.01613 ; perimeter
G1 X46.805 Y110.839 E0.01522 ; perimeter
G1 X46.910 Y110.500 E0.01461 ; perimeter
G1 X47.061 Y110.191 E0.01417 ; perimeter
G1 X47.272 Y109.894 E0.01498 ; perimeter
G1 X48.162 Y108.833 E0.05707 ; perimeter
G1 X48.670 Y109.259 E0.02729 ; perimeter
G1 X47.905 Y110.170 E0.04901 ; perimeter
G1 X47.677 Y110.510 E0.01685 ; perimeter
G1 X47.512 Y110.921 E0.01826 ; perimeter
G1 X47.432 Y111.359 E0.01834 ; perimeter
G1 X47.436 Y111.807 E0.01847 ; perimeter
G1 X47.520 Y112.252 E0.01864 ; perimeter
G1 X47.677 Y112.681 E0.01884 ; perimeter
G1 X47.902 Y113.085 E0.01903 ; perimeter
G1 X48.186 Y113.453 E0.01917 ; perimeter
G1 X48.506 Y113.763 E0.01834 ; perimeter
G1 X77.728 Y138.283 E1.57148 ; perimeter
G1 X77.593 Y138.444 E0.00863 ; perimeter
G1 X95.758 Y138.444 E0.74833 ; perimeter
G1 X95.760 Y138.884 E0.01814 ; perimeter
G1 X84.366 Y138.884 E0.46941 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X84.010 Y140.747 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.132 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X47.894 Y114.466 E1.59032 ; perimeter
G1 X47.513 Y114.108 E0.02155 ; perimeter
G1 X47.181 Y113.720 E0.02106 ; perimeter
G1 X46.900 Y113.303 E0.02070 ; perimeter
G1 X46.673 Y112.867 E0.02024 ; perimeter
G1 X46.505 Y112.420 E0.01970 ; perimeter
G1 X46.397 Y111.967 E0.01918 ; perimeter
G1 X46.354 Y111.619 E0.01443 ; perimeter
G1 X46.355 Y111.175 E0.01832 ; perimeter
G1 X46.418 Y110.751 E0.01764 ; perimeter
G1 X46.540 Y110.353 E0.01714 ; perimeter
G1 X46.719 Y109.988 E0.01678 ; perimeter
G1 X46.958 Y109.652 E0.01696 ; perimeter
G1 X48.113 Y108.274 E0.07406 ; perimeter
G1 X49.228 Y109.210 E0.05995 ; perimeter
G1 X48.222 Y110.409 E0.06447 ; perimeter
G1 X48.029 Y110.696 E0.01426 ; perimeter
G1 X47.894 Y111.031 E0.01489 ; perimeter
G1 X47.828 Y111.393 E0.01513 ; perimeter
G1 X47.832 Y111.768 E0.01546 ; perimeter
G1 X47.903 Y112.146 E0.01584 ; perimeter
G1 X48.039 Y112.515 E0.01621 ; perimeter
G1 X48.234 Y112.866 E0.01654 ; perimeter
G1 X48.482 Y113.189 E0.01678 ; perimeter
G1 X48.771 Y113.469 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.56915 ; perimeter
G1 X78.523 Y137.952 E0.02359 ; perimeter
G1 X78.443 Y138.047 E0.00511 ; perimeter
G1 X96.153 Y138.047 E0.72956 ; perimeter
G1 X96.159 Y139.280 E0.05080 ; perimeter
G1 X84.762 Y139.280 E0.46949 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
G1 X84.175 Y141.143 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.809 Y140.950 F10800.000 ; move inwards before travel
G1 F8640
G1 X80.883 Y141.173 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
G1 X83.451 Y140.278 ; move to first infill point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7564.28
G1 X83.654 Y140.075 E0.01417 ; infill
G1 X83.654 Y139.402 E0.03329 ; infill
G1 X82.979 Y140.077 E0.04720 ; infill
G1 X82.306 Y140.077 E0.03329 ; infill
G1 X83.226 Y139.156 E0.06440 ; infill
G1 X82.553 Y139.156 E0.03329 ; infill
G1 X81.633 Y140.077 E0.06440 ; infill
G1 X80.960 Y140.077 E0.03329 ; infill
G1 X81.880 Y139.156 E0.06440 ; infill
G1 X81.207 Y139.156 E0.03329 ; infill
G1 X80.287 Y140.077 E0.06440 ; infill
G1 X79.971 Y140.077 E0.01561 ; infill
G1 X79.971 Y139.719 E0.01768 ; infill
G1 X80.735 Y138.955 E0.05345 ; infill
G1 F8640
G1 X79.971 Y139.719 E-0.24949 ; wipe and retract
G1 X79.971 Y140.077 E-0.08253 ; wipe and retract
G1 X80.287 Y140.077 E-0.07288 ; wipe and retract
G1 X81.207 Y139.156 E-0.30062 ; wipe and retract
G1 X81.443 Y139.156 E-0.05448 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
G1 X54.599 Y107.306 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X52.081 Y105.194 E0.13541 ; perimeter
G1 X49.632 Y108.112 E0.15696 ; perimeter
G1 X49.124 Y107.686 E0.02729 ; perimeter
G1 X58.122 Y96.964 E0.57663 ; perimeter
G1 X58.629 Y97.390 E0.02729 ; perimeter
G1 X56.180 Y100.308 E0.15696 ; perimeter
G1 X58.698 Y102.421 E0.13541 ; perimeter
G1 X58.354 Y102.831 E0.02205 ; perimeter
G1 X55.836 Y100.718 E0.13541 ; perimeter
G1 X52.425 Y104.784 E0.21861 ; perimeter
G1 X54.943 Y106.896 E0.13541 ; perimeter
G1 X54.637 Y107.260 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.648 Y107.865 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X52.130 Y105.752 E0.13541 ; perimeter
G1 X49.681 Y108.671 E0.15696 ; perimeter
G1 X48.566 Y107.735 E0.05995 ; perimeter
G1 X58.073 Y96.405 E0.60929 ; perimeter
G1 X59.187 Y97.341 E0.05995 ; perimeter
G1 X56.738 Y100.259 E0.15696 ; perimeter
G1 X59.256 Y102.372 E0.13541 ; perimeter
G1 X58.403 Y103.390 E0.05471 ; perimeter
G1 X55.885 Y101.277 E0.13541 ; perimeter
G1 X52.983 Y104.735 E0.18596 ; perimeter
G1 X55.501 Y106.847 E0.13541 ; perimeter
G1 X54.686 Y107.819 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.377 Y107.571 F10800.000 ; move inwards before travel
G1 F8640
G1 X52.130 Y105.752 E-0.75909 ; wipe and retract
G1 X52.127 Y105.755 E-0.00091 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
G1 X90.309 Y115.387 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.19994 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X62.856 Y96.661 E1.00015 ; perimeter
G1 X62.495 Y96.400 E0.01834 ; perimeter
G1 X62.083 Y96.185 E0.01917 ; perimeter
G1 X61.646 Y96.034 E0.01903 ; perimeter
G1 X61.196 Y95.953 E0.01884 ; perimeter
G1 X60.744 Y95.947 E0.01864 ; perimeter
G1 X60.301 Y96.021 E0.01847 ; perimeter
G1 X59.884 Y96.176 E0.01834 ; perimeter
G1 X59.670 Y96.309 E0.01039 ; perimeter
G1 X59.112 Y95.841 E0.03001 ; perimeter
G1 X59.365 Y95.656 E0.01290 ; perimeter
G1 X59.680 Y95.495 E0.01461 ; perimeter
G1 X60.035 Y95.377 E0.01537 ; perimeter
G1 X60.319 Y95.323 E0.01194 ; perimeter
G1 X60.828 Y95.295 E0.02098 ; perimeter
G1 X61.132 Y95.318 E0.01258 ; perimeter
G1 X61.559 Y95.398 E0.01789 ; perimeter
G1 X61.983 Y95.531 E0.01832 ; perimeter
G1 X62.404 Y95.719 E0.01897 ; perimeter
G1 X62.802 Y95.953 E0.01905 ; perimeter
G1 X63.196 Y96.248 E0.02025 ; perimeter
G1 X81.649 Y111.732 E0.99235 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X90.653 Y114.977 E0.20797 ; perimeter
G1 X90.347 Y115.341 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X90.358 Y115.945 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.21033 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X62.612 Y96.974 E1.00551 ; perimeter
G1 X62.286 Y96.738 E0.01657 ; perimeter
G1 X61.925 Y96.549 E0.01678 ; perimeter
G1 X61.546 Y96.418 E0.01654 ; perimeter
G1 X61.159 Y96.349 E0.01621 ; perimeter
G1 X60.774 Y96.344 E0.01584 ; perimeter
G1 X60.404 Y96.406 E0.01546 ; perimeter
G1 X60.059 Y96.534 E0.01513 ; perimeter
G1 X59.753 Y96.725 E0.01489 ; perimeter
G1 X59.657 Y96.816 E0.00544 ; perimeter
G1 X58.525 Y95.866 E0.06089 ; perimeter
G1 X58.827 Y95.558 E0.01778 ; perimeter
G1 X59.156 Y95.318 E0.01678 ; perimeter
G1 X59.527 Y95.128 E0.01714 ; perimeter
G1 X59.934 Y94.992 E0.01770 ; perimeter
G1 X60.271 Y94.928 E0.01412 ; perimeter
G1 X60.832 Y94.898 E0.02314 ; perimeter
G1 X61.184 Y94.924 E0.01454 ; perimeter
G1 X61.655 Y95.012 E0.01976 ; perimeter
G1 X62.124 Y95.160 E0.02024 ; perimeter
G1 X62.584 Y95.365 E0.02075 ; perimeter
G1 X63.023 Y95.623 E0.02099 ; perimeter
G1 X63.442 Y95.937 E0.02157 ; perimeter
G1 X81.793 Y111.335 E0.98685 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X91.211 Y114.928 E0.23024 ; perimeter
G1 X90.396 Y115.899 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X90.072 Y115.665 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.850 Y113.813 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X76.810 Y125.944 E0.08033 ; perimeter
G1 X77.154 Y125.534 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.08033 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X83.830 Y117.577 E0.08033 ; perimeter
G1 X84.174 Y117.167 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.08033 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
M73 P81 R25
G1 X76.251 Y125.992 E0.08033 ; perimeter
G1 X77.105 Y124.975 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.08033 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X83.272 Y117.626 E0.08033 ; perimeter
G1 X84.126 Y116.608 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.08033 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
G1 X98.702 Y114.365 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.565 Y114.116 E0.04793 ; perimeter
G1 X97.567 Y113.605 E0.02104 ; perimeter
G1 X98.702 Y113.846 E0.04778 ; perimeter
G1 X98.702 Y114.305 E0.01891 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y114.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.168 Y114.434 E0.08134 ; perimeter
G1 X97.173 Y113.106 E0.05474 ; perimeter
G1 X99.098 Y113.523 E0.08116 ; perimeter
G1 X99.098 Y114.789 E0.05215 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y115.329 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.703 Y115.176 E0.03321 ; perimeter
G1 X96.770 Y114.753 E0.08150 ; perimeter
G1 X96.778 Y112.606 E0.08843 ; perimeter
G1 X97.960 Y112.883 E0.05002 ; perimeter
G1 X99.494 Y113.200 E0.06453 ; perimeter
G1 X99.494 Y115.269 E0.08522 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.137 Y115.150 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.703 Y115.176 E-0.18405 ; wipe and retract
G1 X96.770 Y114.753 E-0.45683 ; wipe and retract
G1 X96.772 Y114.237 E-0.11912 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
G1 X150.728 Y114.365 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y113.846 E0.02138 ; perimeter
G1 X151.868 Y113.604 E0.04799 ; perimeter
G1 X151.868 Y114.115 E0.02106 ; perimeter
G1 X150.787 Y114.352 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y114.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.332 Y113.523 E0.05462 ; perimeter
G1 X152.264 Y113.104 E0.08145 ; perimeter
G1 X152.264 Y114.434 E0.05479 ; perimeter
G1 X150.390 Y114.837 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y115.329 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.935 Y113.200 E0.08769 ; perimeter
G1 X151.469 Y112.883 E0.06453 ; perimeter
G1 X152.660 Y112.604 E0.05039 ; perimeter
G1 X152.660 Y114.753 E0.08851 ; perimeter
G1 X150.727 Y115.176 E0.08153 ; perimeter
G1 X149.994 Y115.317 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.111 Y114.969 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.935 Y113.200 E-0.48908 ; wipe and retract
G1 X151.084 Y112.963 E-0.27092 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X165.255 Y117.167 E0.08033 ; perimeter
G1 X165.599 Y117.577 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.08033 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X172.276 Y125.534 E0.08033 ; perimeter
G1 X172.620 Y125.944 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.08033 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X165.304 Y116.608 E0.08033 ; perimeter
G1 X166.158 Y117.626 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.08033 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X172.325 Y124.975 E0.08033 ; perimeter
G1 X173.178 Y125.992 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.08033 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
G1 X159.121 Y115.387 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X158.777 Y114.977 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.20797 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X186.234 Y96.248 E0.99235 ; perimeter
G1 X186.627 Y95.953 E0.02025 ; perimeter
G1 X187.026 Y95.719 E0.01905 ; perimeter
G1 X187.446 Y95.531 E0.01897 ; perimeter
G1 X187.871 Y95.398 E0.01832 ; perimeter
G1 X188.293 Y95.319 E0.01770 ; perimeter
G1 X188.710 Y95.293 E0.01723 ; perimeter
G1 X189.008 Y95.309 E0.01227 ; perimeter
G1 X189.480 Y95.402 E0.01985 ; perimeter
G1 X189.747 Y95.493 E0.01159 ; perimeter
G1 X190.065 Y95.656 E0.01473 ; perimeter
G1 X190.318 Y95.841 E0.01290 ; perimeter
G1 X189.760 Y96.309 E0.03001 ; perimeter
G1 X189.546 Y96.176 E0.01039 ; perimeter
G1 X189.128 Y96.021 E0.01834 ; perimeter
G1 X188.686 Y95.947 E0.01847 ; perimeter
G1 X188.234 Y95.953 E0.01864 ; perimeter
G1 X187.783 Y96.034 E0.01884 ; perimeter
G1 X187.347 Y96.185 E0.01903 ; perimeter
G1 X186.935 Y96.400 E0.01913 ; perimeter
G1 X186.606 Y96.637 E0.01673 ; perimeter
G1 X167.976 Y112.267 E1.00180 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.167 Y115.348 E0.19747 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.072 Y115.945 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X158.218 Y114.928 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.23024 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X185.988 Y95.937 E0.98685 ; perimeter
G1 X186.407 Y95.623 E0.02157 ; perimeter
G1 X186.846 Y95.365 E0.02099 ; perimeter
G1 X187.306 Y95.160 E0.02075 ; perimeter
G1 X187.774 Y95.012 E0.02024 ; perimeter
G1 X188.244 Y94.924 E0.01970 ; perimeter
G1 X188.709 Y94.896 E0.01918 ; perimeter
G1 X189.057 Y94.915 E0.01435 ; perimeter
G1 X189.584 Y95.018 E0.02212 ; perimeter
G1 X189.902 Y95.128 E0.01387 ; perimeter
G1 X190.273 Y95.318 E0.01718 ; perimeter
G1 X190.602 Y95.558 E0.01678 ; perimeter
G1 X190.904 Y95.866 E0.01778 ; perimeter
G1 X189.772 Y96.816 E0.06089 ; perimeter
G1 X189.677 Y96.725 E0.00544 ; perimeter
G1 X189.370 Y96.534 E0.01489 ; perimeter
G1 X189.026 Y96.406 E0.01513 ; perimeter
G1 X188.656 Y96.344 E0.01546 ; perimeter
G1 X188.271 Y96.349 E0.01584 ; perimeter
G1 X187.884 Y96.418 E0.01621 ; perimeter
G1 X187.504 Y96.549 E0.01654 ; perimeter
G1 X187.144 Y96.738 E0.01676 ; perimeter
G1 X186.849 Y96.950 E0.01497 ; perimeter
G1 X168.120 Y112.663 E1.00713 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X159.118 Y115.907 E0.20785 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.049 Y115.546 F10800.000 ; move inwards before travel
G1 F8640
G1 X158.218 Y114.928 E-0.30695 ; wipe and retract
G1 X159.721 Y113.667 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
G1 X194.831 Y107.306 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X194.487 Y106.896 E0.02205 ; perimeter
G1 X197.005 Y104.784 E0.13541 ; perimeter
M73 Q81 S26
G1 X193.594 Y100.718 E0.21861 ; perimeter
G1 X191.076 Y102.831 E0.13541 ; perimeter
G1 X190.732 Y102.421 E0.02205 ; perimeter
G1 X193.250 Y100.308 E0.13541 ; perimeter
G1 X190.801 Y97.390 E0.15696 ; perimeter
G1 X191.308 Y96.964 E0.02730 ; perimeter
G1 X200.305 Y107.686 E0.57663 ; perimeter
G1 X199.798 Y108.112 E0.02730 ; perimeter
G1 X197.349 Y105.194 E0.15696 ; perimeter
G1 X194.877 Y107.268 E0.13294 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.782 Y107.865 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X193.928 Y106.847 E0.05471 ; perimeter
G1 X196.446 Y104.735 E0.13541 ; perimeter
G1 X193.545 Y101.277 E0.18596 ; perimeter
G1 X191.027 Y103.390 E0.13541 ; perimeter
G1 X190.173 Y102.372 E0.05471 ; perimeter
G1 X192.691 Y100.259 E0.13541 ; perimeter
G1 X190.242 Y97.341 E0.15696 ; perimeter
G1 X191.357 Y96.405 E0.05995 ; perimeter
G1 X200.864 Y107.735 E0.60929 ; perimeter
G1 X199.749 Y108.671 E0.05995 ; perimeter
G1 X197.300 Y105.752 E0.15696 ; perimeter
G1 X194.828 Y107.826 E0.13294 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.827 Y107.467 F10800.000 ; move inwards before travel
G1 F8640
G1 X193.928 Y106.847 E-0.30695 ; wipe and retract
G1 X195.431 Y105.586 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y138.840 E0.05713 ; perimeter
G1 X169.775 Y138.840 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.05713 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.462 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X153.669 Y138.884 E0.46941 ; perimeter
G1 X153.671 Y138.444 E0.01814 ; perimeter
G1 X171.837 Y138.444 E0.74833 ; perimeter
G1 X171.702 Y138.283 E0.00863 ; perimeter
G1 X200.924 Y113.763 E1.57148 ; perimeter
G1 X201.244 Y113.453 E0.01834 ; perimeter
G1 X201.528 Y113.085 E0.01917 ; perimeter
G1 X201.752 Y112.681 E0.01903 ; perimeter
G1 X201.910 Y112.252 E0.01884 ; perimeter
G1 X201.994 Y111.807 E0.01864 ; perimeter
G1 X201.998 Y111.359 E0.01847 ; perimeter
G1 X201.918 Y110.921 E0.01834 ; perimeter
G1 X201.753 Y110.510 E0.01826 ; perimeter
G1 X201.525 Y110.170 E0.01685 ; perimeter
G1 X200.760 Y109.259 E0.04901 ; perimeter
G1 X201.267 Y108.833 E0.02729 ; perimeter
G1 X202.029 Y109.740 E0.04880 ; perimeter
G1 X202.372 Y110.198 E0.02357 ; perimeter
G1 X202.520 Y110.500 E0.01383 ; perimeter
G1 X202.625 Y110.842 E0.01473 ; perimeter
G1 X202.669 Y111.119 E0.01159 ; perimeter
G1 X202.678 Y111.601 E0.01985 ; perimeter
G1 X202.642 Y111.897 E0.01227 ; perimeter
G1 X202.545 Y112.303 E0.01723 ; perimeter
G1 X202.396 Y112.699 E0.01742 ; perimeter
G1 X202.110 Y113.221 E0.02452 ; perimeter
G1 X201.934 Y113.478 E0.01281 ; perimeter
G1 X201.630 Y113.834 E0.01932 ; perimeter
G1 X201.272 Y114.170 E0.02019 ; perimeter
G1 X171.819 Y138.884 E1.58392 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.522 Y140.789 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.298 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X153.271 Y139.280 E0.46949 ; perimeter
G1 X153.277 Y138.047 E0.05080 ; perimeter
G1 X170.987 Y138.047 E0.72956 ; perimeter
G1 X170.907 Y137.952 E0.00511 ; perimeter
G1 X171.480 Y137.952 E0.02359 ; perimeter
G1 X200.658 Y113.469 E1.56915 ; perimeter
G1 X200.947 Y113.189 E0.01657 ; perimeter
G1 X201.196 Y112.866 E0.01678 ; perimeter
G1 X201.391 Y112.515 E0.01654 ; perimeter
G1 X201.527 Y112.146 E0.01621 ; perimeter
G1 X201.598 Y111.768 E0.01584 ; perimeter
G1 X201.601 Y111.393 E0.01546 ; perimeter
G1 X201.535 Y111.031 E0.01513 ; perimeter
G1 X201.401 Y110.696 E0.01489 ; perimeter
G1 X201.207 Y110.409 E0.01426 ; perimeter
G1 X200.201 Y109.210 E0.06447 ; perimeter
G1 X201.316 Y108.274 E0.05995 ; perimeter
G1 X202.339 Y109.494 E0.06557 ; perimeter
G1 X202.711 Y109.990 E0.02556 ; perimeter
G1 X202.889 Y110.353 E0.01665 ; perimeter
G1 X203.012 Y110.752 E0.01718 ; perimeter
G1 X203.065 Y111.084 E0.01387 ; perimeter
G1 X203.075 Y111.621 E0.02212 ; perimeter
G1 X203.033 Y111.967 E0.01435 ; perimeter
G1 X202.925 Y112.420 E0.01918 ; perimeter
G1 X202.757 Y112.865 E0.01959 ; perimeter
G1 X202.448 Y113.429 E0.02650 ; perimeter
G1 X202.249 Y113.719 E0.01449 ; perimeter
G1 X201.917 Y114.108 E0.02109 ; perimeter
G1 X201.535 Y114.466 E0.02155 ; perimeter
G1 X171.963 Y139.280 E1.59032 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.358 Y141.185 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.282 Y140.786 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.667 Y140.555 E-0.21581 ; wipe and retract
G1 X164.667 Y139.280 E-0.29436 ; wipe and retract
G1 X163.585 Y139.280 E-0.24983 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
G1 X166.540 Y138.955 ; move to first infill point
G1 Z18.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7564.28
G1 X165.776 Y139.719 E0.05345 ; infill
G1 X165.776 Y140.077 E0.01768 ; infill
G1 X166.092 Y140.077 E0.01561 ; infill
G1 X167.012 Y139.156 E0.06440 ; infill
G1 X167.685 Y139.156 E0.03329 ; infill
G1 X166.765 Y140.077 E0.06440 ; infill
G1 X167.438 Y140.077 E0.03329 ; infill
G1 X168.358 Y139.156 E0.06440 ; infill
G1 X169.031 Y139.156 E0.03329 ; infill
G1 X168.111 Y140.077 E0.06440 ; infill
G1 X168.784 Y140.077 E0.03329 ; infill
G1 X169.459 Y139.402 E0.04720 ; infill
G1 X169.459 Y140.075 E0.03329 ; infill
G1 X169.256 Y140.278 E0.01417 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;18.25


G1 F8640
G1 X169.459 Y140.075 E-0.06615 ; wipe and retract
G1 X169.459 Y139.402 E-0.15541 ; wipe and retract
G1 X168.784 Y140.077 E-0.22035 ; wipe and retract
G1 X168.111 Y140.077 E-0.15541 ; wipe and retract
G1 X168.609 Y139.579 E-0.16268 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;18.25
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y100.944 E0.04683 ; perimeter
G1 X84.255 Y100.944 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.04683 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.253 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.738 E0.06208 ; perimeter
G1 X77.896 Y100.738 E0.06788 ; perimeter
G1 X77.669 Y100.548 E0.01220 ; perimeter
G1 X95.810 Y100.548 E0.74731 ; perimeter
G1 X95.810 Y100.738 E0.00784 ; perimeter
G1 X84.651 Y100.738 E0.45971 ; perimeter
G1 X84.651 Y102.245 E0.06208 ; perimeter
G1 X84.296 Y102.600 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X81.004 Y102.633 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X77.477 Y100.387 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X48.308 Y75.911 E1.56862 ; perimeter
G1 X47.952 Y75.577 E0.02013 ; perimeter
G1 X47.650 Y75.223 E0.01918 ; perimeter
G1 X47.394 Y74.845 E0.01879 ; perimeter
G1 X47.189 Y74.452 E0.01828 ; perimeter
G1 X47.037 Y74.051 E0.01766 ; perimeter
G1 X46.940 Y73.646 E0.01716 ; perimeter
G1 X46.901 Y73.331 E0.01307 ; perimeter
G1 X46.903 Y72.941 E0.01604 ; perimeter
G1 X46.957 Y72.577 E0.01517 ; perimeter
G1 X47.062 Y72.239 E0.01457 ; perimeter
G1 X47.213 Y71.931 E0.01413 ; perimeter
G1 X47.423 Y71.636 E0.01494 ; perimeter
G1 X48.313 Y70.574 E0.05708 ; perimeter
G1 X48.821 Y71.000 E0.02729 ; perimeter
G1 X48.056 Y71.911 E0.04901 ; perimeter
G1 X47.828 Y72.251 E0.01685 ; perimeter
G1 X47.663 Y72.662 E0.01826 ; perimeter
G1 X47.583 Y73.100 E0.01834 ; perimeter
G1 X47.587 Y73.548 E0.01847 ; perimeter
G1 X47.671 Y73.993 E0.01864 ; perimeter
G1 X47.828 Y74.422 E0.01884 ; perimeter
G1 X48.053 Y74.826 E0.01903 ; perimeter
G1 X48.337 Y75.195 E0.01917 ; perimeter
G1 X48.657 Y75.504 E0.01834 ; perimeter
G1 X77.821 Y99.976 E1.56839 ; perimeter
G1 X77.516 Y100.341 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X74.991 Y98.229 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X84.417 Y103.039 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.134 E0.05252 ; perimeter
G1 X77.752 Y101.134 E0.05750 ; perimeter
G1 X48.045 Y76.208 E1.59753 ; perimeter
G1 X47.665 Y75.851 E0.02148 ; perimeter
G1 X47.334 Y75.463 E0.02100 ; perimeter
G1 X47.053 Y75.048 E0.02064 ; perimeter
G1 X46.827 Y74.614 E0.02019 ; perimeter
G1 X46.658 Y74.168 E0.01965 ; perimeter
G1 X46.549 Y73.716 E0.01913 ; perimeter
G1 X46.505 Y73.354 E0.01504 ; perimeter
G1 X46.506 Y72.911 E0.01825 ; perimeter
G1 X46.570 Y72.489 E0.01759 ; perimeter
G1 X46.692 Y72.092 E0.01709 ; perimeter
G1 X46.871 Y71.728 E0.01673 ; perimeter
G1 X47.109 Y71.393 E0.01692 ; perimeter
G1 X48.264 Y70.016 E0.07407 ; perimeter
G1 X49.379 Y70.951 E0.05995 ; perimeter
G1 X48.373 Y72.150 E0.06447 ; perimeter
G1 X48.180 Y72.437 E0.01426 ; perimeter
G1 X48.045 Y72.773 E0.01489 ; perimeter
G1 X47.979 Y73.134 E0.01513 ; perimeter
G1 X47.983 Y73.509 E0.01546 ; perimeter
G1 X48.054 Y73.887 E0.01584 ; perimeter
G1 X48.190 Y74.257 E0.01621 ; perimeter
G1 X48.385 Y74.607 E0.01654 ; perimeter
G1 X48.634 Y74.930 E0.01678 ; perimeter
G1 X48.922 Y75.210 E0.01657 ; perimeter
G1 X78.235 Y99.806 E1.57636 ; perimeter
G1 X78.482 Y99.806 E0.01015 ; perimeter
G1 X78.192 Y100.151 E0.01855 ; perimeter
G1 X96.205 Y100.151 E0.74207 ; perimeter
G1 X96.208 Y101.134 E0.04050 ; perimeter
G1 X85.047 Y101.134 E0.45975 ; perimeter
G1 X85.047 Y102.409 E0.05252 ; perimeter
G1 X84.460 Y102.997 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.094 Y102.804 F10800.000 ; move inwards before travel
G1 F8640
G1 X81.168 Y103.027 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X84.140 Y101.977 ; move to first infill point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7932.61
G1 X83.422 Y101.260 E0.04785 ; infill
G1 X82.781 Y101.260 E0.03027 ; infill
G1 X83.451 Y101.931 E0.04473 ; infill
G1 X82.809 Y101.931 E0.03027 ; infill
G1 X82.139 Y101.260 E0.04473 ; infill
G1 X81.497 Y101.260 E0.03027 ; infill
G1 X82.168 Y101.931 E0.04473 ; infill
G1 X81.526 Y101.931 E0.03027 ; infill
G1 X80.855 Y101.260 E0.04473 ; infill
G1 X80.256 Y101.260 E0.02825 ; infill
G1 X80.256 Y101.303 E0.00202 ; infill
G1 X81.085 Y102.131 E0.05528 ; infill
G1 F8640
G1 X80.256 Y101.303 E-0.27058 ; wipe and retract
G1 X80.256 Y101.260 E-0.00989 ; wipe and retract
G1 X80.855 Y101.260 E-0.13830 ; wipe and retract
G1 X81.526 Y101.931 E-0.21898 ; wipe and retract
G1 X82.055 Y101.931 E-0.12224 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X54.745 Y69.043 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X52.232 Y66.935 E0.13514 ; perimeter
G1 X49.783 Y69.854 E0.15696 ; perimeter
G1 X49.275 Y69.428 E0.02729 ; perimeter
G1 X58.273 Y58.705 E0.57663 ; perimeter
G1 X58.780 Y59.131 E0.02729 ; perimeter
G1 X56.331 Y62.050 E0.15696 ; perimeter
G1 X58.844 Y64.158 E0.13514 ; perimeter
G1 X58.500 Y64.568 E0.02205 ; perimeter
G1 X55.987 Y62.460 E0.13514 ; perimeter
G1 X52.576 Y66.525 E0.21861 ; perimeter
G1 X55.089 Y68.633 E0.13514 ; perimeter
G1 X54.783 Y68.998 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.794 Y69.602 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X52.281 Y67.493 E0.13514 ; perimeter
G1 X49.832 Y70.412 E0.15696 ; perimeter
G1 X48.717 Y69.477 E0.05995 ; perimeter
G1 X58.224 Y58.147 E0.60929 ; perimeter
G1 X59.339 Y59.082 E0.05995 ; perimeter
G1 X56.890 Y62.001 E0.15696 ; perimeter
G1 X59.402 Y64.109 E0.13514 ; perimeter
G1 X58.549 Y65.127 E0.05471 ; perimeter
G1 X56.036 Y63.018 E0.13514 ; perimeter
G1 X53.134 Y66.476 E0.18596 ; perimeter
G1 X55.647 Y68.585 E0.13514 ; perimeter
G1 X54.832 Y69.556 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.523 Y69.308 F10800.000 ; move inwards before travel
G1 F8640
G1 X52.281 Y67.493 E-0.75757 ; wipe and retract
G1 X52.274 Y67.501 E-0.00243 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X90.402 Y77.080 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.18964 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X63.007 Y58.403 E1.00736 ; perimeter
G1 X62.646 Y58.142 E0.01834 ; perimeter
G1 X62.234 Y57.926 E0.01917 ; perimeter
G1 X61.797 Y57.775 E0.01903 ; perimeter
G1 X61.347 Y57.694 E0.01884 ; perimeter
G1 X60.895 Y57.689 E0.01864 ; perimeter
G1 X60.452 Y57.763 E0.01847 ; perimeter
G1 X60.035 Y57.917 E0.01834 ; perimeter
G1 X59.821 Y58.051 E0.01039 ; perimeter
G1 X59.263 Y57.582 E0.03001 ; perimeter
G1 X59.514 Y57.399 E0.01282 ; perimeter
G1 X59.829 Y57.237 E0.01457 ; perimeter
G1 X60.181 Y57.119 E0.01530 ; perimeter
G1 X60.479 Y57.062 E0.01252 ; perimeter
G1 X60.970 Y57.036 E0.02024 ; perimeter
G1 X61.290 Y57.060 E0.01322 ; perimeter
G1 X61.715 Y57.140 E0.01782 ; perimeter
G1 X62.132 Y57.272 E0.01799 ; perimeter
G1 X62.677 Y57.530 E0.02485 ; perimeter
G1 X62.955 Y57.695 E0.01332 ; perimeter
G1 X63.347 Y57.989 E0.02018 ; perimeter
G1 X81.934 Y73.586 E0.99956 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.746 Y76.670 E0.19767 ; perimeter
G1 X90.441 Y77.034 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X90.451 Y77.638 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.20003 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X62.763 Y58.715 E1.01272 ; perimeter
G1 X62.437 Y58.480 E0.01657 ; perimeter
G1 X62.076 Y58.291 E0.01678 ; perimeter
G1 X61.697 Y58.160 E0.01654 ; perimeter
G1 X61.310 Y58.090 E0.01621 ; perimeter
G1 X60.925 Y58.086 E0.01584 ; perimeter
G1 X60.555 Y58.147 E0.01546 ; perimeter
G1 X60.210 Y58.275 E0.01513 ; perimeter
G1 X59.904 Y58.466 E0.01489 ; perimeter
G1 X59.809 Y58.557 E0.00544 ; perimeter
G1 X58.676 Y57.607 E0.06089 ; perimeter
G1 X58.978 Y57.300 E0.01773 ; perimeter
G1 X59.305 Y57.060 E0.01673 ; perimeter
G1 X59.674 Y56.871 E0.01709 ; perimeter
G1 X60.080 Y56.735 E0.01764 ; perimeter
G1 X60.431 Y56.668 E0.01472 ; perimeter
G1 X60.974 Y56.639 E0.02240 ; perimeter
G1 X61.342 Y56.666 E0.01519 ; perimeter
G1 X61.812 Y56.755 E0.01971 ; perimeter
G1 X62.277 Y56.902 E0.02008 ; perimeter
G1 X62.863 Y57.180 E0.02674 ; perimeter
G1 X63.175 Y57.366 E0.01496 ; perimeter
G1 X63.593 Y57.679 E0.02150 ; perimeter
G1 X82.078 Y73.189 E0.99407 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X91.305 Y76.621 E0.21994 ; perimeter
G1 X90.490 Y77.592 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X90.167 Y77.357 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.942 Y75.508 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X77.157 Y87.850 E0.07698 ; perimeter
G1 X77.501 Y87.440 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.07698 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X84.178 Y79.483 E0.07698 ; perimeter
G1 X84.522 Y79.073 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.07698 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X76.599 Y87.899 E0.07698 ; perimeter
G1 X77.452 Y86.881 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.07698 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X83.619 Y79.532 E0.07698 ; perimeter
G1 X84.473 Y78.515 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.07698 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X98.987 Y76.217 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.851 Y75.971 E0.04787 ; perimeter
G1 X97.853 Y75.459 E0.02110 ; perimeter
G1 X98.987 Y75.699 E0.04773 ; perimeter
G1 X98.987 Y76.157 E0.01884 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y76.699 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.453 Y76.289 E0.08128 ; perimeter
G1 X97.459 Y74.960 E0.05476 ; perimeter
G1 X99.383 Y75.377 E0.08110 ; perimeter
G1 X99.383 Y76.639 E0.05200 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y77.181 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.561 Y76.941 E0.05116 ; perimeter
G1 X97.055 Y76.607 E0.06354 ; perimeter
G1 X97.065 Y74.461 E0.08843 ; perimeter
G1 X98.219 Y74.731 E0.04880 ; perimeter
G1 X99.780 Y75.054 E0.06567 ; perimeter
G1 X99.780 Y77.121 E0.08516 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.422 Y77.002 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.561 Y76.941 E-0.28437 ; wipe and retract
G1 X97.055 Y76.607 E-0.35614 ; wipe and retract
G1 X97.058 Y76.090 E-0.11949 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X151.013 Y76.219 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y75.699 E0.02139 ; perimeter
G1 X152.153 Y75.458 E0.04799 ; perimeter
G1 X152.153 Y75.969 E0.02105 ; perimeter
G1 X151.072 Y76.206 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y76.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.617 Y75.377 E0.05463 ; perimeter
G1 X152.549 Y74.958 E0.08145 ; perimeter
G1 X152.549 Y76.288 E0.05478 ; perimeter
G1 X150.676 Y76.691 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y77.183 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.220 Y75.054 E0.08769 ; perimeter
G1 X151.781 Y74.731 E0.06567 ; perimeter
G1 X152.945 Y74.458 E0.04925 ; perimeter
G1 X152.945 Y76.607 E0.08851 ; perimeter
G1 X151.012 Y77.030 E0.08153 ; perimeter
G1 X150.279 Y77.171 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.396 Y76.823 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.220 Y75.054 E-0.48909 ; wipe and retract
G1 X151.369 Y74.816 E-0.27091 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X165.478 Y79.073 E0.07698 ; perimeter
G1 X165.822 Y79.483 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.07698 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X172.499 Y87.440 E0.07698 ; perimeter
G1 X172.843 Y87.850 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.07698 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X165.527 Y78.515 E0.07698 ; perimeter
G1 X166.381 Y79.532 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.07698 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X172.548 Y86.881 E0.07698 ; perimeter
G1 X173.401 Y87.899 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.07698 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X159.598 Y77.080 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.254 Y76.670 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.19767 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X186.653 Y57.989 E0.99956 ; perimeter
G1 X187.045 Y57.695 E0.02018 ; perimeter
G1 X187.323 Y57.530 E0.01332 ; perimeter
G1 X187.868 Y57.272 E0.02486 ; perimeter
G1 X188.285 Y57.140 E0.01799 ; perimeter
G1 X188.706 Y57.061 E0.01766 ; perimeter
G1 X189.122 Y57.034 E0.01716 ; perimeter
G1 X189.434 Y57.051 E0.01288 ; perimeter
G1 X189.890 Y57.140 E0.01914 ; perimeter
G1 X190.169 Y57.236 E0.01215 ; perimeter
G1 X190.486 Y57.399 E0.01467 ; perimeter
G1 X190.737 Y57.582 E0.01282 ; perimeter
G1 X190.179 Y58.051 E0.03001 ; perimeter
G1 X189.965 Y57.917 E0.01038 ; perimeter
G1 X189.548 Y57.763 E0.01834 ; perimeter
G1 X189.105 Y57.689 E0.01847 ; perimeter
G1 X188.653 Y57.694 E0.01864 ; perimeter
G1 X188.203 Y57.775 E0.01884 ; perimeter
G1 X187.766 Y57.926 E0.01903 ; perimeter
G1 X187.355 Y58.141 E0.01913 ; perimeter
G1 X187.021 Y58.381 E0.01692 ; perimeter
G1 X168.261 Y74.121 E1.00881 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X159.644 Y77.041 E0.18717 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.549 Y77.638 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X158.695 Y76.621 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.21994 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X186.407 Y57.679 E0.99407 ; perimeter
G1 X186.825 Y57.366 E0.02150 ; perimeter
G1 X187.137 Y57.180 E0.01496 ; perimeter
G1 X187.723 Y56.902 E0.02674 ; perimeter
G1 X188.188 Y56.755 E0.02008 ; perimeter
G1 X188.657 Y56.666 E0.01965 ; perimeter
G1 X189.120 Y56.637 E0.01913 ; perimeter
G1 X189.483 Y56.657 E0.01497 ; perimeter
G1 X189.993 Y56.757 E0.02141 ; perimeter
G1 X190.325 Y56.871 E0.01445 ; perimeter
G1 X190.695 Y57.060 E0.01712 ; perimeter
G1 X191.022 Y57.300 E0.01673 ; perimeter
G1 X191.324 Y57.607 E0.01773 ; perimeter
G1 X190.191 Y58.557 E0.06089 ; perimeter
G1 X190.096 Y58.466 E0.00544 ; perimeter
G1 X189.790 Y58.275 E0.01489 ; perimeter
G1 X189.445 Y58.147 E0.01513 ; perimeter
G1 X189.075 Y58.086 E0.01546 ; perimeter
G1 X188.690 Y58.090 E0.01584 ; perimeter
G1 X188.303 Y58.160 E0.01621 ; perimeter
G1 X187.924 Y58.291 E0.01654 ; perimeter
G1 X187.563 Y58.479 E0.01676 ; perimeter
G1 X187.264 Y58.694 E0.01516 ; perimeter
G1 X168.405 Y74.517 E1.01414 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X159.595 Y77.600 E0.19756 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.527 Y77.239 F10800.000 ; move inwards before travel
G1 F8640
G1 X158.695 Y76.621 E-0.30695 ; wipe and retract
G1 X160.198 Y75.360 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X195.255 Y69.043 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X194.911 Y68.633 E0.02205 ; perimeter
G1 X197.424 Y66.525 E0.13514 ; perimeter
G1 X194.013 Y62.460 E0.21861 ; perimeter
G1 X191.500 Y64.568 E0.13514 ; perimeter
G1 X191.156 Y64.158 E0.02205 ; perimeter
G1 X193.669 Y62.050 E0.13514 ; perimeter
G1 X191.220 Y59.131 E0.15696 ; perimeter
G1 X191.727 Y58.705 E0.02729 ; perimeter
G1 X200.725 Y69.428 E0.57663 ; perimeter
G1 X200.217 Y69.854 E0.02729 ; perimeter
G1 X197.768 Y66.935 E0.15696 ; perimeter
G1 X195.301 Y69.005 E0.13266 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.206 Y69.602 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X194.353 Y68.585 E0.05471 ; perimeter
G1 X196.866 Y66.476 E0.13514 ; perimeter
G1 X193.964 Y63.018 E0.18596 ; perimeter
G1 X191.451 Y65.127 E0.13514 ; perimeter
G1 X190.598 Y64.109 E0.05471 ; perimeter
G1 X193.110 Y62.001 E0.13514 ; perimeter
G1 X190.661 Y59.082 E0.15696 ; perimeter
G1 X191.776 Y58.147 E0.05995 ; perimeter
G1 X201.283 Y69.477 E0.60929 ; perimeter
G1 X200.168 Y70.412 E0.05995 ; perimeter
G1 X197.719 Y67.493 E0.15696 ; perimeter
G1 X195.252 Y69.563 E0.13266 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.251 Y69.204 F10800.000 ; move inwards before travel
G1 F8640
G1 X194.353 Y68.585 E-0.30695 ; wipe and retract
G1 X195.856 Y67.323 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y100.944 E0.04683 ; perimeter
G1 X170.060 Y100.944 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.04683 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.747 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.738 E0.06208 ; perimeter
G1 X154.190 Y100.738 E0.45971 ; perimeter
G1 X154.190 Y100.548 E0.00784 ; perimeter
G1 X172.331 Y100.548 E0.74731 ; perimeter
G1 X172.104 Y100.738 E0.01220 ; perimeter
G1 X170.456 Y100.738 E0.06788 ; perimeter
G1 X170.456 Y102.245 E0.06208 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.807 Y102.643 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.349 Y102.245 E-0.14011 ; wipe and retract
G1 X165.349 Y100.738 E-0.34797 ; wipe and retract
G1 X164.171 Y100.738 E-0.27192 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X172.523 Y100.387 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X172.179 Y99.976 E0.02205 ; perimeter
G1 X201.343 Y75.504 E1.56839 ; perimeter
G1 X201.663 Y75.195 E0.01834 ; perimeter
G1 X201.947 Y74.826 E0.01917 ; perimeter
G1 X202.172 Y74.422 E0.01903 ; perimeter
G1 X202.329 Y73.993 E0.01884 ; perimeter
G1 X202.413 Y73.548 E0.01864 ; perimeter
G1 X202.417 Y73.100 E0.01847 ; perimeter
G1 X202.337 Y72.662 E0.01834 ; perimeter
G1 X202.172 Y72.251 E0.01826 ; perimeter
G1 X201.944 Y71.911 E0.01685 ; perimeter
G1 X201.179 Y71.000 E0.04901 ; perimeter
G1 X201.687 Y70.574 E0.02729 ; perimeter
G1 X202.472 Y71.510 E0.05035 ; perimeter
G1 X202.790 Y71.938 E0.02194 ; perimeter
G1 X202.938 Y72.239 E0.01384 ; perimeter
G1 X203.044 Y72.579 E0.01467 ; perimeter
G1 X203.090 Y72.871 E0.01215 ; perimeter
G1 X203.098 Y73.335 E0.01914 ; perimeter
G1 X203.060 Y73.646 E0.01288 ; perimeter
G1 X202.963 Y74.051 E0.01716 ; perimeter
G1 X202.813 Y74.446 E0.01741 ; perimeter
G1 X202.537 Y74.951 E0.02370 ; perimeter
G1 X202.352 Y75.221 E0.01352 ; perimeter
G1 X202.048 Y75.577 E0.01926 ; perimeter
G1 X201.692 Y75.911 E0.02013 ; perimeter
G1 X172.569 Y100.348 E1.56614 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X172.179 Y99.976 E-0.12438 ; wipe and retract
G1 X174.287 Y98.207 E-0.63562 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X165.583 Y103.039 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 P82 R24
M204 S800 ; adjust acceleration
G1 F3600
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.134 E0.05252 ; perimeter
G1 X153.792 Y101.134 E0.45975 ; perimeter
G1 X153.795 Y100.151 E0.04050 ; perimeter
G1 X171.808 Y100.151 E0.74207 ; perimeter
G1 X171.518 Y99.806 E0.01855 ; perimeter
G1 X171.765 Y99.806 E0.01015 ; perimeter
G1 X201.078 Y75.210 E1.57636 ; perimeter
G1 X201.366 Y74.930 E0.01657 ; perimeter
G1 X201.615 Y74.607 E0.01678 ; perimeter
G1 X201.810 Y74.257 E0.01654 ; perimeter
G1 X201.946 Y73.887 E0.01621 ; perimeter
G1 X202.017 Y73.509 E0.01584 ; perimeter
G1 X202.021 Y73.134 E0.01546 ; perimeter
G1 X201.955 Y72.773 E0.01513 ; perimeter
G1 X201.820 Y72.437 E0.01489 ; perimeter
G1 X201.627 Y72.150 E0.01426 ; perimeter
G1 X200.621 Y70.951 E0.06447 ; perimeter
G1 X201.736 Y70.016 E0.05995 ; perimeter
G1 X202.783 Y71.265 E0.06715 ; perimeter
G1 X203.130 Y71.730 E0.02392 ; perimeter
G1 X203.308 Y72.092 E0.01662 ; perimeter
G1 X203.431 Y72.490 E0.01712 ; perimeter
G1 X203.485 Y72.836 E0.01445 ; perimeter
G1 X203.495 Y73.356 E0.02141 ; perimeter
G1 X203.451 Y73.716 E0.01497 ; perimeter
G1 X203.342 Y74.168 E0.01913 ; perimeter
G1 X203.174 Y74.612 E0.01956 ; perimeter
G1 X202.875 Y75.158 E0.02566 ; perimeter
G1 X202.667 Y75.463 E0.01521 ; perimeter
G1 X202.335 Y75.851 E0.02103 ; perimeter
G1 X201.955 Y76.208 E0.02148 ; perimeter
G1 X172.248 Y101.134 E1.59753 ; perimeter
G1 X170.853 Y101.134 E0.05750 ; perimeter
G1 X170.853 Y102.409 E0.05252 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.643 Y103.039 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.567 Y102.640 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.953 Y102.409 E-0.21581 ; wipe and retract
G1 X164.953 Y101.134 E-0.29436 ; wipe and retract
G1 X163.871 Y101.134 E-0.24983 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X166.890 Y102.131 ; move to first infill point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7932.59
G1 X166.061 Y101.303 E0.05528 ; infill
G1 X166.061 Y101.260 E0.00202 ; infill
G1 X166.660 Y101.260 E0.02825 ; infill
G1 X167.331 Y101.931 E0.04473 ; infill
G1 X167.973 Y101.931 E0.03027 ; infill
G1 X167.302 Y101.260 E0.04473 ; infill
G1 X167.944 Y101.260 E0.03027 ; infill
G1 X168.614 Y101.931 E0.04473 ; infill
G1 X169.256 Y101.931 E0.03027 ; infill
G1 X168.586 Y101.260 E0.04473 ; infill
G1 X169.227 Y101.260 E0.03027 ; infill
G1 X169.945 Y101.977 E0.04785 ; infill
G1 F8640
G1 X169.227 Y101.260 E-0.23423 ; wipe and retract
G1 X168.586 Y101.260 E-0.14819 ; wipe and retract
G1 X169.256 Y101.931 E-0.21898 ; wipe and retract
G1 X168.614 Y101.931 E-0.14819 ; wipe and retract
G1 X168.583 Y101.899 E-0.01040 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y139.090 E0.04683 ; perimeter
G1 X83.970 Y139.090 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.04683 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.968 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.884 E0.06208 ; perimeter
G1 X77.611 Y138.884 E0.06788 ; perimeter
G1 X77.384 Y138.694 E0.01220 ; perimeter
G1 X95.525 Y138.694 E0.74731 ; perimeter
G1 X95.525 Y138.884 E0.00784 ; perimeter
G1 X84.366 Y138.884 E0.45971 ; perimeter
G1 X84.366 Y140.391 E0.06208 ; perimeter
G1 X84.010 Y140.747 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X80.719 Y140.779 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X77.192 Y138.533 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X48.023 Y114.057 E1.56862 ; perimeter
G1 X47.667 Y113.723 E0.02013 ; perimeter
G1 X47.364 Y113.369 E0.01918 ; perimeter
G1 X47.109 Y112.991 E0.01879 ; perimeter
G1 X46.904 Y112.598 E0.01828 ; perimeter
G1 X46.752 Y112.197 E0.01766 ; perimeter
G1 X46.654 Y111.792 E0.01716 ; perimeter
G1 X46.616 Y111.477 E0.01307 ; perimeter
G1 X46.617 Y111.087 E0.01604 ; perimeter
G1 X46.672 Y110.723 E0.01517 ; perimeter
G1 X46.776 Y110.385 E0.01457 ; perimeter
G1 X46.928 Y110.077 E0.01413 ; perimeter
G1 X47.138 Y109.782 E0.01494 ; perimeter
G1 X48.028 Y108.720 E0.05708 ; perimeter
G1 X48.536 Y109.146 E0.02729 ; perimeter
G1 X47.771 Y110.058 E0.04901 ; perimeter
G1 X47.543 Y110.397 E0.01685 ; perimeter
G1 X47.378 Y110.808 E0.01826 ; perimeter
G1 X47.298 Y111.246 E0.01834 ; perimeter
G1 X47.302 Y111.694 E0.01847 ; perimeter
G1 X47.386 Y112.139 E0.01864 ; perimeter
G1 X47.543 Y112.569 E0.01884 ; perimeter
G1 X47.768 Y112.972 E0.01903 ; perimeter
G1 X48.052 Y113.341 E0.01917 ; perimeter
G1 X48.372 Y113.651 E0.01834 ; perimeter
G1 X77.536 Y138.123 E1.56839 ; perimeter
G1 X77.231 Y138.487 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X74.706 Y136.375 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X84.132 Y141.185 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.280 E0.05252 ; perimeter
G1 X77.467 Y139.280 E0.05750 ; perimeter
G1 X47.760 Y114.354 E1.59753 ; perimeter
G1 X47.380 Y113.997 E0.02148 ; perimeter
G1 X47.049 Y113.610 E0.02100 ; perimeter
G1 X46.768 Y113.195 E0.02064 ; perimeter
G1 X46.541 Y112.760 E0.02019 ; perimeter
G1 X46.373 Y112.314 E0.01965 ; perimeter
G1 X46.264 Y111.863 E0.01913 ; perimeter
G1 X46.220 Y111.500 E0.01504 ; perimeter
G1 X46.221 Y111.057 E0.01825 ; perimeter
G1 X46.284 Y110.635 E0.01759 ; perimeter
G1 X46.407 Y110.239 E0.01709 ; perimeter
G1 X46.586 Y109.874 E0.01673 ; perimeter
G1 X46.824 Y109.539 E0.01692 ; perimeter
G1 X47.979 Y108.162 E0.07407 ; perimeter
G1 X49.094 Y109.097 E0.05995 ; perimeter
G1 X48.088 Y110.296 E0.06447 ; perimeter
G1 X47.895 Y110.584 E0.01426 ; perimeter
G1 X47.760 Y110.919 E0.01489 ; perimeter
G1 X47.694 Y111.280 E0.01513 ; perimeter
G1 X47.698 Y111.656 E0.01546 ; perimeter
G1 X47.769 Y112.033 E0.01584 ; perimeter
G1 X47.905 Y112.403 E0.01621 ; perimeter
G1 X48.100 Y112.754 E0.01654 ; perimeter
G1 X48.348 Y113.076 E0.01678 ; perimeter
G1 X48.637 Y113.356 E0.01657 ; perimeter
G1 X77.950 Y137.952 E1.57636 ; perimeter
G1 X78.196 Y137.952 E0.01015 ; perimeter
G1 X77.907 Y138.297 E0.01855 ; perimeter
G1 X95.920 Y138.297 E0.74207 ; perimeter
G1 X95.922 Y139.280 E0.04050 ; perimeter
G1 X84.762 Y139.280 E0.45975 ; perimeter
G1 X84.762 Y140.555 E0.05252 ; perimeter
M73 Q82 S25
G1 X84.175 Y141.143 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.809 Y140.950 F10800.000 ; move inwards before travel
G1 F8640
G1 X80.883 Y141.173 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X83.854 Y140.123 ; move to first infill point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7932.61
G1 X83.137 Y139.406 E0.04785 ; infill
G1 X82.495 Y139.406 E0.03027 ; infill
G1 X83.166 Y140.077 E0.04473 ; infill
G1 X82.524 Y140.077 E0.03027 ; infill
G1 X81.854 Y139.406 E0.04473 ; infill
G1 X81.212 Y139.406 E0.03027 ; infill
G1 X81.882 Y140.077 E0.04473 ; infill
G1 X81.241 Y140.077 E0.03027 ; infill
G1 X80.570 Y139.406 E0.04473 ; infill
G1 X79.971 Y139.406 E0.02825 ; infill
G1 X79.971 Y139.449 E0.00202 ; infill
G1 X80.800 Y140.278 E0.05528 ; infill
G1 F8640
G1 X79.971 Y139.449 E-0.27058 ; wipe and retract
G1 X79.971 Y139.406 E-0.00989 ; wipe and retract
G1 X80.570 Y139.406 E-0.13830 ; wipe and retract
G1 X81.241 Y140.077 E-0.21898 ; wipe and retract
G1 X81.770 Y140.077 E-0.12224 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X54.460 Y107.190 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X51.947 Y105.081 E0.13514 ; perimeter
G1 X49.498 Y108.000 E0.15696 ; perimeter
G1 X48.990 Y107.574 E0.02729 ; perimeter
G1 X57.987 Y96.851 E0.57663 ; perimeter
G1 X58.495 Y97.277 E0.02729 ; perimeter
G1 X56.046 Y100.196 E0.15696 ; perimeter
G1 X58.559 Y102.304 E0.13514 ; perimeter
G1 X58.215 Y102.714 E0.02205 ; perimeter
G1 X55.702 Y100.606 E0.13514 ; perimeter
G1 X52.291 Y104.671 E0.21861 ; perimeter
G1 X54.804 Y106.780 E0.13514 ; perimeter
G1 X54.498 Y107.144 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.508 Y107.748 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X51.996 Y105.639 E0.13514 ; perimeter
G1 X49.547 Y108.558 E0.15696 ; perimeter
G1 X48.432 Y107.623 E0.05995 ; perimeter
G1 X57.939 Y96.293 E0.60929 ; perimeter
G1 X59.053 Y97.228 E0.05995 ; perimeter
G1 X56.604 Y100.147 E0.15696 ; perimeter
G1 X59.117 Y102.255 E0.13514 ; perimeter
G1 X58.264 Y103.273 E0.05471 ; perimeter
G1 X55.751 Y101.164 E0.13514 ; perimeter
G1 X52.849 Y104.622 E0.18596 ; perimeter
G1 X55.362 Y106.731 E0.13514 ; perimeter
G1 X54.547 Y107.702 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.237 Y107.454 F10800.000 ; move inwards before travel
G1 F8640
G1 X51.996 Y105.639 E-0.75757 ; wipe and retract
G1 X51.989 Y105.648 E-0.00243 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X90.117 Y115.226 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.18964 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X62.722 Y96.549 E1.00736 ; perimeter
G1 X62.361 Y96.288 E0.01834 ; perimeter
G1 X61.949 Y96.072 E0.01917 ; perimeter
G1 X61.512 Y95.921 E0.01903 ; perimeter
G1 X61.062 Y95.840 E0.01884 ; perimeter
G1 X60.609 Y95.835 E0.01864 ; perimeter
G1 X60.167 Y95.909 E0.01847 ; perimeter
G1 X59.750 Y96.064 E0.01834 ; perimeter
G1 X59.536 Y96.197 E0.01039 ; perimeter
G1 X58.978 Y95.728 E0.03001 ; perimeter
G1 X59.229 Y95.545 E0.01282 ; perimeter
G1 X59.544 Y95.383 E0.01457 ; perimeter
G1 X59.896 Y95.265 E0.01530 ; perimeter
G1 X60.194 Y95.209 E0.01252 ; perimeter
G1 X60.685 Y95.182 E0.02024 ; perimeter
G1 X61.005 Y95.206 E0.01322 ; perimeter
G1 X61.430 Y95.286 E0.01782 ; perimeter
G1 X61.846 Y95.418 E0.01799 ; perimeter
G1 X62.392 Y95.676 E0.02485 ; perimeter
G1 X62.670 Y95.842 E0.01332 ; perimeter
G1 X63.062 Y96.135 E0.02018 ; perimeter
G1 X81.649 Y111.732 E0.99956 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X90.461 Y114.816 E0.19767 ; perimeter
G1 X90.156 Y115.180 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X90.166 Y115.784 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.20003 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X62.478 Y96.862 E1.01272 ; perimeter
G1 X62.152 Y96.626 E0.01657 ; perimeter
G1 X61.791 Y96.437 E0.01678 ; perimeter
G1 X61.412 Y96.306 E0.01654 ; perimeter
G1 X61.024 Y96.236 E0.01621 ; perimeter
G1 X60.640 Y96.232 E0.01584 ; perimeter
G1 X60.270 Y96.293 E0.01546 ; perimeter
G1 X59.925 Y96.421 E0.01513 ; perimeter
G1 X59.618 Y96.612 E0.01489 ; perimeter
G1 X59.523 Y96.704 E0.00544 ; perimeter
G1 X58.391 Y95.754 E0.06089 ; perimeter
G1 X58.692 Y95.446 E0.01773 ; perimeter
G1 X59.020 Y95.207 E0.01673 ; perimeter
G1 X59.389 Y95.017 E0.01709 ; perimeter
G1 X59.795 Y94.881 E0.01764 ; perimeter
G1 X60.146 Y94.814 E0.01472 ; perimeter
G1 X60.689 Y94.785 E0.02240 ; perimeter
G1 X61.057 Y94.812 E0.01519 ; perimeter
G1 X61.527 Y94.901 E0.01971 ; perimeter
G1 X61.992 Y95.048 E0.02008 ; perimeter
G1 X62.578 Y95.326 E0.02674 ; perimeter
G1 X62.890 Y95.512 E0.01496 ; perimeter
G1 X63.308 Y95.825 E0.02150 ; perimeter
G1 X81.793 Y111.335 E0.99407 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X91.020 Y114.767 E0.21994 ; perimeter
G1 X90.205 Y115.738 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.882 Y115.503 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.657 Y113.654 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X76.872 Y125.996 E0.07698 ; perimeter
G1 X77.216 Y125.586 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.07698 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X83.893 Y117.629 E0.07698 ; perimeter
G1 X84.237 Y117.219 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.07698 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X76.314 Y126.045 E0.07698 ; perimeter
G1 X77.167 Y125.027 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.07698 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X83.334 Y117.678 E0.07698 ; perimeter
G1 X84.188 Y116.661 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.07698 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X98.702 Y114.363 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.566 Y114.118 E0.04787 ; perimeter
G1 X97.568 Y113.606 E0.02110 ; perimeter
G1 X98.702 Y113.845 E0.04773 ; perimeter
G1 X98.702 Y114.303 E0.01884 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y114.845 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.168 Y114.435 E0.08128 ; perimeter
G1 X97.174 Y113.106 E0.05476 ; perimeter
G1 X99.098 Y113.523 E0.08110 ; perimeter
G1 X99.098 Y114.785 E0.05200 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y115.327 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.276 Y115.087 E0.05116 ; perimeter
G1 X96.770 Y114.753 E0.06354 ; perimeter
G1 X96.780 Y112.607 E0.08843 ; perimeter
G1 X97.933 Y112.877 E0.04880 ; perimeter
G1 X99.494 Y113.200 E0.06567 ; perimeter
G1 X99.494 Y115.267 E0.08516 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.137 Y115.148 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.276 Y115.087 E-0.28437 ; wipe and retract
G1 X96.770 Y114.753 E-0.35614 ; wipe and retract
G1 X96.773 Y114.236 E-0.11949 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X150.728 Y114.365 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y113.845 E0.02139 ; perimeter
G1 X151.868 Y113.604 E0.04799 ; perimeter
G1 X151.868 Y114.115 E0.02105 ; perimeter
G1 X150.787 Y114.352 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y114.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.332 Y113.523 E0.05463 ; perimeter
G1 X152.264 Y113.104 E0.08145 ; perimeter
G1 X152.264 Y114.434 E0.05478 ; perimeter
G1 X150.390 Y114.837 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y115.329 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.935 Y113.200 E0.08769 ; perimeter
G1 X151.496 Y112.877 E0.06567 ; perimeter
G1 X152.660 Y112.604 E0.04925 ; perimeter
G1 X152.660 Y114.753 E0.08851 ; perimeter
G1 X150.727 Y115.176 E0.08153 ; perimeter
G1 X149.994 Y115.317 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.111 Y114.969 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.935 Y113.200 E-0.48909 ; wipe and retract
G1 X151.084 Y112.962 E-0.27091 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X165.193 Y117.219 E0.07698 ; perimeter
G1 X165.537 Y117.629 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.07698 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X172.214 Y125.586 E0.07698 ; perimeter
G1 X172.558 Y125.996 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.07698 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X165.242 Y116.661 E0.07698 ; perimeter
G1 X166.096 Y117.678 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.07698 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X172.262 Y125.027 E0.07698 ; perimeter
G1 X173.116 Y126.045 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.07698 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X159.312 Y115.226 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X158.968 Y114.816 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.19767 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X186.368 Y96.135 E0.99956 ; perimeter
G1 X186.760 Y95.842 E0.02018 ; perimeter
G1 X187.038 Y95.676 E0.01332 ; perimeter
G1 X187.583 Y95.418 E0.02486 ; perimeter
G1 X188.000 Y95.286 E0.01799 ; perimeter
G1 X188.421 Y95.207 E0.01766 ; perimeter
G1 X188.837 Y95.181 E0.01716 ; perimeter
G1 X189.149 Y95.197 E0.01288 ; perimeter
G1 X189.605 Y95.286 E0.01914 ; perimeter
G1 X189.884 Y95.382 E0.01215 ; perimeter
G1 X190.201 Y95.545 E0.01467 ; perimeter
G1 X190.452 Y95.728 E0.01282 ; perimeter
G1 X189.894 Y96.197 E0.03001 ; perimeter
G1 X189.680 Y96.064 E0.01038 ; perimeter
G1 X189.262 Y95.909 E0.01834 ; perimeter
G1 X188.820 Y95.835 E0.01847 ; perimeter
G1 X188.368 Y95.840 E0.01864 ; perimeter
G1 X187.917 Y95.921 E0.01884 ; perimeter
G1 X187.481 Y96.072 E0.01903 ; perimeter
G1 X187.069 Y96.287 E0.01913 ; perimeter
G1 X186.736 Y96.527 E0.01692 ; perimeter
G1 X167.976 Y112.267 E1.00881 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.358 Y115.187 E0.18717 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.264 Y115.784 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X158.410 Y114.767 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.21994 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X186.122 Y95.825 E0.99407 ; perimeter
G1 X186.539 Y95.512 E0.02150 ; perimeter
G1 X186.851 Y95.326 E0.01496 ; perimeter
G1 X187.438 Y95.048 E0.02674 ; perimeter
G1 X187.903 Y94.901 E0.02008 ; perimeter
G1 X188.372 Y94.813 E0.01965 ; perimeter
G1 X188.835 Y94.784 E0.01913 ; perimeter
G1 X189.198 Y94.803 E0.01497 ; perimeter
G1 X189.708 Y94.903 E0.02141 ; perimeter
G1 X190.040 Y95.017 E0.01445 ; perimeter
G1 X190.409 Y95.207 E0.01712 ; perimeter
G1 X190.737 Y95.446 E0.01673 ; perimeter
G1 X191.039 Y95.754 E0.01773 ; perimeter
G1 X189.906 Y96.704 E0.06089 ; perimeter
G1 X189.811 Y96.612 E0.00544 ; perimeter
G1 X189.504 Y96.421 E0.01489 ; perimeter
G1 X189.160 Y96.293 E0.01513 ; perimeter
G1 X188.790 Y96.232 E0.01546 ; perimeter
G1 X188.405 Y96.236 E0.01584 ; perimeter
G1 X188.018 Y96.306 E0.01621 ; perimeter
G1 X187.639 Y96.437 E0.01654 ; perimeter
G1 X187.278 Y96.626 E0.01676 ; perimeter
G1 X186.979 Y96.840 E0.01516 ; perimeter
G1 X168.120 Y112.663 E1.01414 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X159.310 Y115.746 E0.19756 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.242 Y115.385 F10800.000 ; move inwards before travel
G1 F8640
G1 X158.410 Y114.767 E-0.30695 ; wipe and retract
G1 X159.913 Y113.506 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X194.970 Y107.190 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X194.626 Y106.780 E0.02205 ; perimeter
G1 X197.139 Y104.671 E0.13514 ; perimeter
G1 X193.728 Y100.606 E0.21861 ; perimeter
G1 X191.215 Y102.714 E0.13514 ; perimeter
G1 X190.871 Y102.304 E0.02205 ; perimeter
G1 X193.384 Y100.196 E0.13514 ; perimeter
G1 X190.935 Y97.277 E0.15696 ; perimeter
G1 X191.442 Y96.851 E0.02729 ; perimeter
G1 X200.439 Y107.574 E0.57663 ; perimeter
G1 X199.932 Y108.000 E0.02729 ; perimeter
G1 X197.483 Y105.081 E0.15696 ; perimeter
G1 X195.016 Y107.151 E0.13266 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.921 Y107.748 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X194.068 Y106.731 E0.05471 ; perimeter
G1 X196.580 Y104.622 E0.13514 ; perimeter
G1 X193.679 Y101.164 E0.18596 ; perimeter
G1 X191.166 Y103.273 E0.13514 ; perimeter
G1 X190.312 Y102.255 E0.05471 ; perimeter
G1 X192.825 Y100.147 E0.13514 ; perimeter
G1 X190.376 Y97.228 E0.15696 ; perimeter
G1 X191.491 Y96.293 E0.05995 ; perimeter
G1 X200.998 Y107.623 E0.60929 ; perimeter
G1 X199.883 Y108.558 E0.05995 ; perimeter
G1 X197.434 Y105.639 E0.15696 ; perimeter
G1 X194.967 Y107.709 E0.13266 ; perimeter
M204 S1000 ; adjust acceleration
G1 X194.966 Y107.351 F10800.000 ; move inwards before travel
G1 F8640
G1 X194.068 Y106.731 E-0.30695 ; wipe and retract
G1 X195.571 Y105.470 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y139.090 E0.04683 ; perimeter
G1 X169.775 Y139.090 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.04683 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.462 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.884 E0.06208 ; perimeter
G1 X153.905 Y138.884 E0.45971 ; perimeter
G1 X153.905 Y138.694 E0.00784 ; perimeter
G1 X172.046 Y138.694 E0.74731 ; perimeter
G1 X171.819 Y138.884 E0.01220 ; perimeter
G1 X170.171 Y138.884 E0.06788 ; perimeter
G1 X170.171 Y140.391 E0.06208 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.522 Y140.789 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X165.064 Y140.391 E-0.14011 ; wipe and retract
G1 X165.064 Y138.884 E-0.34797 ; wipe and retract
G1 X163.886 Y138.884 E-0.27192 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X172.238 Y138.533 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X171.893 Y138.123 E0.02205 ; perimeter
G1 X201.058 Y113.651 E1.56839 ; perimeter
G1 X201.378 Y113.341 E0.01834 ; perimeter
G1 X201.662 Y112.972 E0.01917 ; perimeter
G1 X201.886 Y112.569 E0.01903 ; perimeter
G1 X202.044 Y112.139 E0.01884 ; perimeter
G1 X202.128 Y111.694 E0.01864 ; perimeter
G1 X202.132 Y111.246 E0.01847 ; perimeter
G1 X202.052 Y110.808 E0.01834 ; perimeter
G1 X201.887 Y110.397 E0.01826 ; perimeter
G1 X201.659 Y110.058 E0.01685 ; perimeter
G1 X200.894 Y109.146 E0.04901 ; perimeter
G1 X201.402 Y108.720 E0.02729 ; perimeter
G1 X202.187 Y109.657 E0.05035 ; perimeter
G1 X202.505 Y110.084 E0.02194 ; perimeter
G1 X202.653 Y110.385 E0.01384 ; perimeter
G1 X202.758 Y110.726 E0.01467 ; perimeter
G1 X202.804 Y111.017 E0.01215 ; perimeter
G1 X202.813 Y111.481 E0.01914 ; perimeter
G1 X202.775 Y111.792 E0.01288 ; perimeter
G1 X202.677 Y112.197 E0.01716 ; perimeter
G1 X202.528 Y112.592 E0.01741 ; perimeter
G1 X202.252 Y113.097 E0.02370 ; perimeter
G1 X202.066 Y113.368 E0.01352 ; perimeter
G1 X201.763 Y113.723 E0.01926 ; perimeter
G1 X201.406 Y114.057 E0.02013 ; perimeter
G1 X172.284 Y138.494 E1.56614 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X171.893 Y138.123 E-0.12438 ; wipe and retract
G1 X174.002 Y136.353 E-0.63562 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X165.298 Y141.185 ; move to first perimeter point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.280 E0.05252 ; perimeter
G1 X153.507 Y139.280 E0.45975 ; perimeter
G1 X153.510 Y138.297 E0.04050 ; perimeter
G1 X171.523 Y138.297 E0.74207 ; perimeter
G1 X171.233 Y137.952 E0.01855 ; perimeter
G1 X171.480 Y137.952 E0.01015 ; perimeter
G1 X200.792 Y113.356 E1.57636 ; perimeter
G1 X201.081 Y113.076 E0.01657 ; perimeter
G1 X201.330 Y112.754 E0.01678 ; perimeter
G1 X201.525 Y112.403 E0.01654 ; perimeter
G1 X201.661 Y112.033 E0.01621 ; perimeter
G1 X201.732 Y111.656 E0.01584 ; perimeter
G1 X201.735 Y111.280 E0.01546 ; perimeter
G1 X201.669 Y110.919 E0.01513 ; perimeter
G1 X201.535 Y110.584 E0.01489 ; perimeter
G1 X201.342 Y110.296 E0.01426 ; perimeter
G1 X200.336 Y109.097 E0.06447 ; perimeter
G1 X201.450 Y108.162 E0.05995 ; perimeter
G1 X202.498 Y109.411 E0.06715 ; perimeter
G1 X202.845 Y109.876 E0.02392 ; perimeter
G1 X203.023 Y110.239 E0.01662 ; perimeter
G1 X203.146 Y110.636 E0.01712 ; perimeter
G1 X203.200 Y110.982 E0.01445 ; perimeter
G1 X203.210 Y111.502 E0.02141 ; perimeter
G1 X203.166 Y111.863 E0.01497 ; perimeter
G1 X203.057 Y112.314 E0.01913 ; perimeter
G1 X202.889 Y112.758 E0.01956 ; perimeter
G1 X202.590 Y113.305 E0.02566 ; perimeter
G1 X202.381 Y113.609 E0.01521 ; perimeter
G1 X202.050 Y113.997 E0.02103 ; perimeter
G1 X201.669 Y114.354 E0.02148 ; perimeter
G1 X171.963 Y139.280 E1.59753 ; perimeter
G1 X170.567 Y139.280 E0.05750 ; perimeter
G1 X170.567 Y140.555 E0.05252 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.358 Y141.185 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.282 Y140.786 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.667 Y140.555 E-0.21581 ; wipe and retract
G1 X164.667 Y139.280 E-0.29436 ; wipe and retract
G1 X163.585 Y139.280 E-0.24983 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
G1 X166.605 Y140.278 ; move to first infill point
G1 Z18.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7932.59
G1 X165.776 Y139.449 E0.05528 ; infill
G1 X165.776 Y139.406 E0.00202 ; infill
G1 X166.375 Y139.406 E0.02825 ; infill
G1 X167.046 Y140.077 E0.04473 ; infill
G1 X167.687 Y140.077 E0.03027 ; infill
G1 X167.017 Y139.406 E0.04473 ; infill
G1 X167.659 Y139.406 E0.03027 ; infill
G1 X168.329 Y140.077 E0.04473 ; infill
G1 X168.971 Y140.077 E0.03027 ; infill
G1 X168.300 Y139.406 E0.04473 ; infill
G1 X168.942 Y139.406 E0.03027 ; infill
G1 X169.660 Y140.123 E0.04785 ; infill
;BEFORE_LAYER_CHANGE
G92 E0.0
;18.5


G1 F8640
G1 X168.942 Y139.406 E-0.23423 ; wipe and retract
G1 X168.300 Y139.406 E-0.14819 ; wipe and retract
G1 X168.971 Y140.077 E-0.21898 ; wipe and retract
G1 X168.329 Y140.077 E-0.14819 ; wipe and retract
G1 X168.297 Y140.045 E-0.01040 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z18.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;18.5
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y101.107 E0.04011 ; perimeter
G1 X84.255 Y101.107 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.04011 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.253 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.711 E0.06321 ; perimeter
G1 X84.651 Y100.711 E0.21040 ; perimeter
G1 X84.651 Y102.245 E0.06321 ; perimeter
G1 X84.296 Y102.600 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.417 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y100.314 E0.08630 ; perimeter
G1 X85.047 Y100.314 E0.24305 ; perimeter
G1 X85.047 Y102.409 E0.08630 ; perimeter
G1 X84.460 Y102.997 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.087 Y102.814 F10800.000 ; move inwards before travel
G1 F8640
G1 X81.168 Y103.027 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X83.718 Y102.131 ; move to first infill point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.62
G1 X83.939 Y101.910 E0.01632 ; infill
G1 X83.939 Y101.423 E0.02544 ; infill
G1 X83.716 Y101.423 E0.01163 ; infill
G1 X83.208 Y101.931 E0.03747 ; infill
G1 X82.498 Y101.931 E0.03707 ; infill
G1 X83.006 Y101.423 E0.03747 ; infill
G1 X82.295 Y101.423 E0.03707 ; infill
G1 X81.788 Y101.931 E0.03747 ; infill
G1 X81.078 Y101.931 E0.03707 ; infill
G1 X81.585 Y101.423 E0.03747 ; infill
G1 X80.875 Y101.423 E0.03707 ; infill
G1 X80.167 Y102.131 E0.05230 ; infill
G1 F8640
G1 X80.875 Y101.423 E-0.23134 ; wipe and retract
G1 X81.585 Y101.423 E-0.16399 ; wipe and retract
G1 X81.078 Y101.931 E-0.16575 ; wipe and retract
G1 X81.788 Y101.931 E-0.16399 ; wipe and retract
G1 X81.895 Y101.824 E-0.03493 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X77.219 Y87.902 E0.07363 ; perimeter
G1 X77.563 Y87.492 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.07363 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X84.240 Y79.535 E0.07363 ; perimeter
G1 X84.584 Y79.125 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.07363 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X76.661 Y87.951 E0.07363 ; perimeter
G1 X77.515 Y86.933 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.07363 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X83.682 Y79.584 E0.07363 ; perimeter
G1 X84.535 Y78.567 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.07363 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X98.987 Y76.219 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y75.969 E0.04806 ; perimeter
G1 X97.847 Y75.458 E0.02103 ; perimeter
G1 X98.987 Y75.699 E0.04798 ; perimeter
G1 X98.987 Y76.159 E0.01892 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y76.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.451 Y76.288 E0.08142 ; perimeter
G1 X97.451 Y74.958 E0.05477 ; perimeter
G1 X99.383 Y75.376 E0.08145 ; perimeter
G1 X99.383 Y76.643 E0.05216 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y77.183 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.988 Y77.030 E0.03321 ; perimeter
G1 X97.055 Y76.607 E0.08153 ; perimeter
G1 X97.055 Y74.458 E0.08850 ; perimeter
G1 X98.191 Y74.725 E0.04810 ; perimeter
G1 X99.780 Y75.054 E0.06682 ; perimeter
G1 X99.780 Y77.123 E0.08522 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.421 Y77.005 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.988 Y77.030 E-0.18405 ; wipe and retract
G1 X97.055 Y76.607 E-0.45698 ; wipe and retract
G1 X97.055 Y76.091 E-0.11896 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X90.211 Y76.919 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.17934 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X62.873 Y58.290 E1.01457 ; perimeter
G1 X62.512 Y58.029 E0.01834 ; perimeter
G1 X62.100 Y57.813 E0.01917 ; perimeter
G1 X61.663 Y57.662 E0.01903 ; perimeter
G1 X61.213 Y57.582 E0.01884 ; perimeter
G1 X60.749 Y57.576 E0.01912 ; perimeter
G1 X60.233 Y57.682 E0.02171 ; perimeter
G1 X59.901 Y57.805 E0.01458 ; perimeter
G1 X59.687 Y57.938 E0.01039 ; perimeter
G1 X59.129 Y57.470 E0.03001 ; perimeter
G1 X59.378 Y57.287 E0.01274 ; perimeter
G1 X59.692 Y57.126 E0.01452 ; perimeter
G1 X60.042 Y57.008 E0.01522 ; perimeter
G1 X60.355 Y56.948 E0.01310 ; perimeter
G1 X60.827 Y56.923 E0.01950 ; perimeter
G1 X61.163 Y56.948 E0.01385 ; perimeter
G1 X61.586 Y57.029 E0.01776 ; perimeter
G1 X62.002 Y57.161 E0.01798 ; perimeter
G1 X62.529 Y57.409 E0.02399 ; perimeter
G1 X62.822 Y57.584 E0.01406 ; perimeter
G1 X63.213 Y57.877 E0.02011 ; perimeter
G1 X81.934 Y73.586 E1.00677 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.555 Y76.509 E0.18737 ; perimeter
G1 X90.249 Y76.873 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X90.260 Y77.478 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.18973 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X62.629 Y58.603 E1.01993 ; perimeter
G1 X62.303 Y58.367 E0.01657 ; perimeter
G1 X61.942 Y58.178 E0.01678 ; perimeter
G1 X61.563 Y58.047 E0.01654 ; perimeter
G1 X61.176 Y57.978 E0.01621 ; perimeter
G1 X60.787 Y57.973 E0.01601 ; perimeter
G1 X60.342 Y58.064 E0.01870 ; perimeter
G1 X60.076 Y58.163 E0.01168 ; perimeter
G1 X59.769 Y58.353 E0.01489 ; perimeter
G1 X59.674 Y58.445 E0.00544 ; perimeter
G1 X58.542 Y57.495 E0.06089 ; perimeter
G1 X58.843 Y57.188 E0.01769 ; perimeter
G1 X59.169 Y56.949 E0.01668 ; perimeter
G1 X59.537 Y56.760 E0.01704 ; perimeter
G1 X59.941 Y56.624 E0.01757 ; perimeter
G1 X60.306 Y56.554 E0.01532 ; perimeter
G1 X60.831 Y56.526 E0.02166 ; perimeter
G1 X61.215 Y56.554 E0.01584 ; perimeter
G1 X61.683 Y56.644 E0.01965 ; perimeter
G1 X62.147 Y56.791 E0.02004 ; perimeter
G1 X62.715 Y57.059 E0.02587 ; perimeter
G1 X63.043 Y57.254 E0.01571 ; perimeter
G1 X63.459 Y57.566 E0.02143 ; perimeter
G1 X82.078 Y73.189 E1.00128 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X91.113 Y76.460 E0.20964 ; perimeter
G1 X90.298 Y77.432 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.976 Y77.195 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.750 Y75.349 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X54.606 Y68.927 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X52.098 Y66.822 E0.13487 ; perimeter
G1 X49.649 Y69.741 E0.15696 ; perimeter
G1 X49.141 Y69.315 E0.02729 ; perimeter
G1 X58.139 Y58.593 E0.57663 ; perimeter
G1 X58.646 Y59.018 E0.02729 ; perimeter
G1 X56.197 Y61.937 E0.15696 ; perimeter
G1 X58.705 Y64.041 E0.13487 ; perimeter
G1 X58.361 Y64.452 E0.02205 ; perimeter
G1 X55.853 Y62.347 E0.13487 ; perimeter
G1 X52.442 Y66.412 E0.21861 ; perimeter
G1 X54.950 Y68.517 E0.13487 ; perimeter
G1 X54.644 Y68.881 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.655 Y69.485 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X52.147 Y67.381 E0.13487 ; perimeter
G1 X49.698 Y70.299 E0.15696 ; perimeter
G1 X48.583 Y69.364 E0.05995 ; perimeter
G1 X58.090 Y58.034 E0.60929 ; perimeter
G1 X59.204 Y58.970 E0.05995 ; perimeter
G1 X56.755 Y61.888 E0.15696 ; perimeter
G1 X59.263 Y63.993 E0.13487 ; perimeter
G1 X58.410 Y65.010 E0.05471 ; perimeter
G1 X55.902 Y62.906 E0.13487 ; perimeter
M73 P82 R23
G1 X53.000 Y66.363 E0.18596 ; perimeter
G1 X55.508 Y68.468 E0.13487 ; perimeter
G1 X54.693 Y69.439 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.384 Y69.191 F10800.000 ; move inwards before travel
G1 F8640
G1 X52.147 Y67.381 E-0.75605 ; wipe and retract
G1 X52.136 Y67.394 E-0.00395 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X77.286 Y100.226 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X48.174 Y75.798 E1.56553 ; perimeter
G1 X47.819 Y75.465 E0.02007 ; perimeter
G1 X47.517 Y75.113 E0.01912 ; perimeter
G1 X47.262 Y74.736 E0.01874 ; perimeter
G1 X47.057 Y74.344 E0.01823 ; perimeter
G1 X46.905 Y73.944 E0.01763 ; perimeter
G1 X46.807 Y73.541 E0.01710 ; perimeter
G1 X46.767 Y73.212 E0.01365 ; perimeter
G1 X46.769 Y72.824 E0.01596 ; perimeter
G1 X46.824 Y72.462 E0.01512 ; perimeter
G1 X46.928 Y72.125 E0.01452 ; perimeter
G1 X47.079 Y71.818 E0.01409 ; perimeter
G1 X47.289 Y71.523 E0.01490 ; perimeter
G1 X48.179 Y70.462 E0.05708 ; perimeter
G1 X48.687 Y70.888 E0.02729 ; perimeter
G1 X47.922 Y71.799 E0.04901 ; perimeter
G1 X47.694 Y72.138 E0.01685 ; perimeter
G1 X47.529 Y72.550 E0.01826 ; perimeter
G1 X47.449 Y72.987 E0.01834 ; perimeter
G1 X47.453 Y73.436 E0.01847 ; perimeter
G1 X47.537 Y73.881 E0.01864 ; perimeter
G1 X47.694 Y74.310 E0.01884 ; perimeter
G1 X47.919 Y74.714 E0.01903 ; perimeter
G1 X48.203 Y75.082 E0.01917 ; perimeter
G1 X48.523 Y75.392 E0.01834 ; perimeter
G1 X77.630 Y99.816 E1.56530 ; perimeter
G1 X77.324 Y100.180 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X77.335 Y100.784 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X47.911 Y76.095 E1.58231 ; perimeter
G1 X47.532 Y75.740 E0.02142 ; perimeter
G1 X47.202 Y75.353 E0.02094 ; perimeter
G1 X46.921 Y74.940 E0.02059 ; perimeter
G1 X46.695 Y74.506 E0.02014 ; perimeter
G1 X46.526 Y74.062 E0.01960 ; perimeter
G1 X46.416 Y73.612 E0.01907 ; perimeter
G1 X46.370 Y73.235 E0.01565 ; perimeter
G1 X46.373 Y72.793 E0.01818 ; perimeter
G1 X46.436 Y72.373 E0.01753 ; perimeter
G1 X46.559 Y71.978 E0.01704 ; perimeter
G1 X46.738 Y71.614 E0.01668 ; perimeter
G1 X46.975 Y71.281 E0.01687 ; perimeter
G1 X48.130 Y69.903 E0.07407 ; perimeter
G1 X49.245 Y70.839 E0.05995 ; perimeter
G1 X48.239 Y72.038 E0.06447 ; perimeter
G1 X48.046 Y72.325 E0.01426 ; perimeter
G1 X47.911 Y72.660 E0.01489 ; perimeter
G1 X47.845 Y73.022 E0.01513 ; perimeter
G1 X47.849 Y73.397 E0.01546 ; perimeter
G1 X47.920 Y73.775 E0.01584 ; perimeter
G1 X48.056 Y74.144 E0.01621 ; perimeter
G1 X48.251 Y74.495 E0.01654 ; perimeter
G1 X48.499 Y74.818 E0.01678 ; perimeter
G1 X48.788 Y75.097 E0.01657 ; perimeter
G1 X78.188 Y99.767 E1.58105 ; perimeter
G1 X77.373 Y100.738 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X77.031 Y100.524 F10800.000 ; move inwards before travel
G1 F8640
G1 X74.848 Y98.626 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X151.013 Y76.219 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y75.699 E0.02140 ; perimeter
G1 X152.153 Y75.458 E0.04798 ; perimeter
G1 X152.153 Y75.969 E0.02103 ; perimeter
G1 X151.072 Y76.206 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y76.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.617 Y75.376 E0.05463 ; perimeter
G1 X152.549 Y74.958 E0.08145 ; perimeter
G1 X152.549 Y76.288 E0.05477 ; perimeter
G1 X150.676 Y76.691 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y77.183 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.220 Y75.054 E0.08769 ; perimeter
G1 X151.809 Y74.725 E0.06682 ; perimeter
G1 X152.945 Y74.458 E0.04810 ; perimeter
G1 X152.945 Y76.607 E0.08851 ; perimeter
G1 X151.012 Y77.030 E0.08153 ; perimeter
G1 X150.279 Y77.171 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.396 Y76.823 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.220 Y75.054 E-0.48910 ; wipe and retract
G1 X151.369 Y74.816 E-0.27090 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X165.416 Y79.125 E0.07363 ; perimeter
G1 X165.760 Y79.535 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.07363 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X172.437 Y87.492 E0.07363 ; perimeter
G1 X172.781 Y87.902 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.07363 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X165.465 Y78.567 E0.07363 ; perimeter
G1 X166.318 Y79.584 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.07363 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X172.485 Y86.933 E0.07363 ; perimeter
G1 X173.339 Y87.951 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.07363 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y101.107 E0.04011 ; perimeter
G1 X170.060 Y101.107 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.04011 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.747 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.711 E0.06321 ; perimeter
G1 X170.456 Y100.711 E0.21040 ; perimeter
M73 Q82 S24
G1 X170.456 Y102.245 E0.06321 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.807 Y102.643 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.583 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y100.314 E0.08630 ; perimeter
G1 X170.853 Y100.314 E0.24306 ; perimeter
G1 X170.853 Y102.409 E0.08630 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.643 Y103.039 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.567 Y102.640 F10800.000 ; move inwards before travel
G1 X165.972 Y102.131 ; move to first infill point
G1 F7168.6
G1 X166.680 Y101.423 E0.05230 ; infill
G1 X167.390 Y101.423 E0.03707 ; infill
G1 X166.883 Y101.931 E0.03747 ; infill
G1 X167.593 Y101.931 E0.03707 ; infill
G1 X168.101 Y101.423 E0.03747 ; infill
G1 X168.811 Y101.423 E0.03707 ; infill
G1 X168.303 Y101.931 E0.03747 ; infill
G1 X169.013 Y101.931 E0.03707 ; infill
G1 X169.521 Y101.423 E0.03747 ; infill
G1 X169.744 Y101.423 E0.01163 ; infill
G1 X169.744 Y101.910 E0.02544 ; infill
G1 X169.523 Y102.131 E0.01633 ; infill
G1 F8640
G1 X169.744 Y101.910 E-0.07222 ; wipe and retract
G1 X169.744 Y101.423 E-0.11252 ; wipe and retract
G1 X169.521 Y101.423 E-0.05147 ; wipe and retract
G1 X169.013 Y101.931 E-0.16575 ; wipe and retract
G1 X168.303 Y101.931 E-0.16399 ; wipe and retract
G1 X168.811 Y101.423 E-0.16575 ; wipe and retract
G1 X168.688 Y101.423 E-0.02830 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X172.714 Y100.226 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X172.370 Y99.816 E0.02205 ; perimeter
G1 X201.477 Y75.392 E1.56530 ; perimeter
G1 X201.797 Y75.082 E0.01834 ; perimeter
G1 X202.081 Y74.714 E0.01917 ; perimeter
G1 X202.306 Y74.310 E0.01903 ; perimeter
G1 X202.467 Y73.870 E0.01930 ; perimeter
G1 X202.548 Y73.338 E0.02218 ; perimeter
G1 X202.551 Y72.988 E0.01443 ; perimeter
G1 X202.471 Y72.550 E0.01834 ; perimeter
G1 X202.306 Y72.138 E0.01826 ; perimeter
G1 X202.078 Y71.799 E0.01685 ; perimeter
G1 X201.313 Y70.888 E0.04901 ; perimeter
G1 X201.821 Y70.462 E0.02729 ; perimeter
G1 X202.631 Y71.427 E0.05189 ; perimeter
G1 X202.923 Y71.823 E0.02031 ; perimeter
G1 X203.072 Y72.125 E0.01385 ; perimeter
G1 X203.177 Y72.463 E0.01460 ; perimeter
G1 X203.225 Y72.768 E0.01271 ; perimeter
G1 X203.233 Y73.212 E0.01829 ; perimeter
G1 X203.180 Y73.612 E0.01660 ; perimeter
G1 X203.096 Y73.941 E0.01400 ; perimeter
G1 X202.945 Y74.339 E0.01753 ; perimeter
G1 X202.679 Y74.826 E0.02288 ; perimeter
G1 X202.484 Y75.111 E0.01423 ; perimeter
G1 X202.181 Y75.465 E0.01919 ; perimeter
G1 X201.826 Y75.798 E0.02007 ; perimeter
G1 X172.760 Y100.187 E1.56306 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.665 Y100.784 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.812 Y99.767 E0.05471 ; perimeter
G1 X201.212 Y75.097 E1.58105 ; perimeter
G1 X201.501 Y74.818 E0.01657 ; perimeter
G1 X201.749 Y74.495 E0.01678 ; perimeter
G1 X201.944 Y74.144 E0.01654 ; perimeter
G1 X202.081 Y73.771 E0.01638 ; perimeter
G1 X202.152 Y73.306 E0.01938 ; perimeter
G1 X202.155 Y73.022 E0.01172 ; perimeter
G1 X202.089 Y72.660 E0.01513 ; perimeter
G1 X201.954 Y72.325 E0.01489 ; perimeter
G1 X201.761 Y72.038 E0.01426 ; perimeter
G1 X200.755 Y70.839 E0.06447 ; perimeter
G1 X201.870 Y69.903 E0.05995 ; perimeter
G1 X202.942 Y71.181 E0.06873 ; perimeter
G1 X203.263 Y71.616 E0.02228 ; perimeter
G1 X203.441 Y71.978 E0.01659 ; perimeter
G1 X203.564 Y72.373 E0.01707 ; perimeter
G1 X203.621 Y72.734 E0.01503 ; perimeter
G1 X203.630 Y73.235 E0.02065 ; perimeter
G1 X203.570 Y73.687 E0.01878 ; perimeter
G1 X203.475 Y74.061 E0.01589 ; perimeter
G1 X203.306 Y74.505 E0.01957 ; perimeter
G1 X203.018 Y75.034 E0.02483 ; perimeter
G1 X202.799 Y75.353 E0.01594 ; perimeter
G1 X202.468 Y75.740 E0.02096 ; perimeter
G1 X202.089 Y76.095 E0.02142 ; perimeter
G1 X172.711 Y100.746 E1.57983 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.596 Y100.390 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.812 Y99.767 E-0.30695 ; wipe and retract
G1 X173.315 Y98.506 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X195.394 Y68.927 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X195.050 Y68.517 E0.02205 ; perimeter
G1 X197.558 Y66.412 E0.13487 ; perimeter
G1 X194.147 Y62.347 E0.21861 ; perimeter
G1 X191.639 Y64.452 E0.13486 ; perimeter
G1 X191.295 Y64.041 E0.02205 ; perimeter
G1 X193.803 Y61.937 E0.13487 ; perimeter
G1 X191.354 Y59.018 E0.15696 ; perimeter
G1 X191.861 Y58.593 E0.02729 ; perimeter
G1 X200.859 Y69.315 E0.57663 ; perimeter
G1 X200.351 Y69.741 E0.02729 ; perimeter
G1 X197.902 Y66.822 E0.15696 ; perimeter
G1 X195.440 Y68.888 E0.13239 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.345 Y69.485 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X194.492 Y68.468 E0.05471 ; perimeter
G1 X197.000 Y66.363 E0.13487 ; perimeter
G1 X194.098 Y62.906 E0.18596 ; perimeter
G1 X191.590 Y65.010 E0.13486 ; perimeter
G1 X190.737 Y63.993 E0.05471 ; perimeter
G1 X193.245 Y61.888 E0.13487 ; perimeter
G1 X190.796 Y58.970 E0.15696 ; perimeter
G1 X191.910 Y58.034 E0.05995 ; perimeter
G1 X201.417 Y69.364 E0.60929 ; perimeter
G1 X200.302 Y70.299 E0.05995 ; perimeter
G1 X197.853 Y67.381 E0.15696 ; perimeter
G1 X195.391 Y69.447 E0.13239 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.390 Y69.088 F10800.000 ; move inwards before travel
G1 F8640
G1 X194.492 Y68.468 E-0.30695 ; wipe and retract
G1 X195.995 Y67.207 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X159.789 Y76.919 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.445 Y76.509 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.18737 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X186.787 Y57.877 E1.00677 ; perimeter
G1 X187.178 Y57.584 E0.02011 ; perimeter
G1 X187.471 Y57.409 E0.01406 ; perimeter
G1 X187.998 Y57.161 E0.02399 ; perimeter
G1 X188.414 Y57.029 E0.01798 ; perimeter
G1 X188.834 Y56.949 E0.01763 ; perimeter
G1 X189.248 Y56.922 E0.01710 ; perimeter
G1 X189.576 Y56.939 E0.01349 ; perimeter
G1 X190.015 Y57.025 E0.01843 ; perimeter
G1 X190.306 Y57.125 E0.01271 ; perimeter
G1 X190.622 Y57.287 E0.01460 ; perimeter
G1 X190.871 Y57.470 E0.01274 ; perimeter
G1 X190.313 Y57.938 E0.03001 ; perimeter
G1 X190.099 Y57.805 E0.01038 ; perimeter
G1 X189.682 Y57.650 E0.01834 ; perimeter
G1 X189.239 Y57.576 E0.01847 ; perimeter
G1 X188.787 Y57.582 E0.01864 ; perimeter
G1 X188.337 Y57.662 E0.01884 ; perimeter
G1 X187.900 Y57.813 E0.01903 ; perimeter
G1 X187.489 Y58.029 E0.01914 ; perimeter
G1 X187.151 Y58.272 E0.01712 ; perimeter
G1 X168.261 Y74.121 E1.01583 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X159.835 Y76.881 E0.17687 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.740 Y77.478 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X158.887 Y76.460 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.20964 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X186.541 Y57.566 E1.00128 ; perimeter
G1 X186.957 Y57.254 E0.02143 ; perimeter
G1 X187.285 Y57.059 E0.01571 ; perimeter
G1 X187.853 Y56.791 E0.02587 ; perimeter
G1 X188.317 Y56.644 E0.02004 ; perimeter
G1 X188.784 Y56.555 E0.01960 ; perimeter
G1 X189.246 Y56.525 E0.01907 ; perimeter
G1 X189.624 Y56.545 E0.01560 ; perimeter
G1 X190.117 Y56.641 E0.02070 ; perimeter
G1 X190.462 Y56.759 E0.01503 ; perimeter
G1 X190.831 Y56.949 E0.01707 ; perimeter
G1 X191.157 Y57.188 E0.01668 ; perimeter
G1 X191.458 Y57.495 E0.01769 ; perimeter
G1 X190.326 Y58.445 E0.06089 ; perimeter
G1 X190.231 Y58.353 E0.00544 ; perimeter
G1 X189.924 Y58.163 E0.01489 ; perimeter
G1 X189.579 Y58.035 E0.01513 ; perimeter
G1 X189.209 Y57.973 E0.01546 ; perimeter
G1 X188.825 Y57.978 E0.01584 ; perimeter
G1 X188.437 Y58.047 E0.01621 ; perimeter
G1 X188.058 Y58.178 E0.01654 ; perimeter
G1 X187.697 Y58.367 E0.01676 ; perimeter
G1 X187.395 Y58.585 E0.01535 ; perimeter
G1 X168.405 Y74.517 E1.02116 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X159.786 Y77.439 E0.18726 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.720 Y77.078 F10800.000 ; move inwards before travel
G1 F8640
G1 X158.887 Y76.460 E-0.30695 ; wipe and retract
G1 X160.390 Y75.199 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y139.253 E0.04011 ; perimeter
G1 X83.970 Y139.253 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.04011 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.968 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.857 E0.06321 ; perimeter
G1 X84.366 Y138.857 E0.21040 ; perimeter
G1 X84.366 Y140.391 E0.06321 ; perimeter
G1 X84.010 Y140.747 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.132 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y138.460 E0.08630 ; perimeter
G1 X84.762 Y138.460 E0.24305 ; perimeter
G1 X84.762 Y140.555 E0.08630 ; perimeter
G1 X84.175 Y141.143 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.802 Y140.960 F10800.000 ; move inwards before travel
G1 F8640
G1 X80.883 Y141.173 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X83.432 Y140.278 ; move to first infill point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.62
G1 X83.654 Y140.056 E0.01632 ; infill
G1 X83.654 Y139.569 E0.02544 ; infill
G1 X83.431 Y139.569 E0.01163 ; infill
G1 X82.923 Y140.077 E0.03747 ; infill
G1 X82.213 Y140.077 E0.03707 ; infill
G1 X82.720 Y139.569 E0.03747 ; infill
G1 X82.010 Y139.569 E0.03707 ; infill
G1 X81.503 Y140.077 E0.03747 ; infill
G1 X80.792 Y140.077 E0.03707 ; infill
G1 X81.300 Y139.569 E0.03747 ; infill
G1 X80.590 Y139.569 E0.03707 ; infill
G1 X79.881 Y140.278 E0.05230 ; infill
G1 F8640
G1 X80.590 Y139.569 E-0.23134 ; wipe and retract
G1 X81.300 Y139.569 E-0.16399 ; wipe and retract
G1 X80.792 Y140.077 E-0.16575 ; wipe and retract
G1 X81.503 Y140.077 E-0.16399 ; wipe and retract
G1 X81.610 Y139.970 E-0.03493 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X76.934 Y126.048 E0.07363 ; perimeter
G1 X77.278 Y125.638 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.07363 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X83.955 Y117.681 E0.07363 ; perimeter
G1 X84.299 Y117.271 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.07363 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X76.376 Y126.097 E0.07363 ; perimeter
G1 X77.229 Y125.080 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.07363 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X83.396 Y117.730 E0.07363 ; perimeter
G1 X84.250 Y116.713 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.07363 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X98.702 Y114.365 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y114.115 E0.04806 ; perimeter
G1 X97.562 Y113.604 E0.02103 ; perimeter
G1 X98.702 Y113.845 E0.04798 ; perimeter
G1 X98.702 Y114.305 E0.01892 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y114.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.166 Y114.434 E0.08142 ; perimeter
G1 X97.166 Y113.104 E0.05477 ; perimeter
G1 X99.098 Y113.523 E0.08145 ; perimeter
G1 X99.098 Y114.789 E0.05216 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y115.329 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.703 Y115.176 E0.03321 ; perimeter
G1 X96.769 Y114.753 E0.08153 ; perimeter
G1 X96.769 Y112.604 E0.08850 ; perimeter
G1 X97.906 Y112.871 E0.04810 ; perimeter
G1 X99.494 Y113.200 E0.06682 ; perimeter
G1 X99.494 Y115.269 E0.08522 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.136 Y115.151 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.703 Y115.176 E-0.18405 ; wipe and retract
G1 X96.769 Y114.753 E-0.45698 ; wipe and retract
G1 X96.769 Y114.238 E-0.11896 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X89.926 Y115.065 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.17934 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X62.588 Y96.436 E1.01457 ; perimeter
G1 X62.227 Y96.175 E0.01834 ; perimeter
G1 X61.815 Y95.960 E0.01917 ; perimeter
G1 X61.378 Y95.808 E0.01903 ; perimeter
G1 X60.928 Y95.728 E0.01884 ; perimeter
G1 X60.464 Y95.722 E0.01912 ; perimeter
G1 X59.948 Y95.828 E0.02171 ; perimeter
G1 X59.616 Y95.951 E0.01458 ; perimeter
G1 X59.402 Y96.084 E0.01039 ; perimeter
G1 X58.844 Y95.616 E0.03001 ; perimeter
G1 X59.093 Y95.433 E0.01274 ; perimeter
G1 X59.407 Y95.272 E0.01452 ; perimeter
G1 X59.757 Y95.154 E0.01522 ; perimeter
G1 X60.069 Y95.094 E0.01310 ; perimeter
G1 X60.542 Y95.069 E0.01950 ; perimeter
G1 X60.877 Y95.094 E0.01385 ; perimeter
G1 X61.301 Y95.175 E0.01776 ; perimeter
G1 X61.717 Y95.307 E0.01798 ; perimeter
G1 X62.243 Y95.556 E0.02399 ; perimeter
G1 X62.537 Y95.730 E0.01406 ; perimeter
G1 X62.927 Y96.023 E0.02011 ; perimeter
G1 X81.649 Y111.732 E1.00677 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X90.270 Y114.655 E0.18737 ; perimeter
G1 X89.964 Y115.019 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.975 Y115.624 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.18973 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X62.344 Y96.749 E1.01993 ; perimeter
G1 X62.018 Y96.513 E0.01657 ; perimeter
G1 X61.657 Y96.324 E0.01678 ; perimeter
G1 X61.278 Y96.193 E0.01654 ; perimeter
G1 X60.890 Y96.124 E0.01621 ; perimeter
G1 X60.502 Y96.119 E0.01601 ; perimeter
G1 X60.057 Y96.210 E0.01870 ; perimeter
G1 X59.791 Y96.309 E0.01168 ; perimeter
G1 X59.484 Y96.500 E0.01489 ; perimeter
G1 X59.389 Y96.591 E0.00544 ; perimeter
G1 X58.257 Y95.641 E0.06089 ; perimeter
G1 X58.557 Y95.334 E0.01769 ; perimeter
G1 X58.884 Y95.095 E0.01668 ; perimeter
G1 X59.252 Y94.906 E0.01704 ; perimeter
G1 X59.656 Y94.770 E0.01757 ; perimeter
G1 X60.021 Y94.700 E0.01532 ; perimeter
G1 X60.546 Y94.672 E0.02166 ; perimeter
G1 X60.930 Y94.701 E0.01584 ; perimeter
G1 X61.398 Y94.790 E0.01965 ; perimeter
G1 X61.862 Y94.937 E0.02004 ; perimeter
G1 X62.430 Y95.205 E0.02587 ; perimeter
G1 X62.758 Y95.400 E0.01571 ; perimeter
G1 X63.174 Y95.712 E0.02143 ; perimeter
G1 X81.793 Y111.335 E1.00128 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X90.828 Y114.606 E0.20964 ; perimeter
G1 X90.013 Y115.578 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.691 Y115.341 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.464 Y113.495 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X54.320 Y107.073 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X51.813 Y104.969 E0.13487 ; perimeter
G1 X49.364 Y107.887 E0.15696 ; perimeter
G1 X48.856 Y107.461 E0.02729 ; perimeter
G1 X57.853 Y96.739 E0.57663 ; perimeter
G1 X58.361 Y97.165 E0.02729 ; perimeter
G1 X55.912 Y100.083 E0.15696 ; perimeter
G1 X58.420 Y102.188 E0.13487 ; perimeter
G1 X58.076 Y102.598 E0.02205 ; perimeter
G1 X55.568 Y100.493 E0.13487 ; perimeter
G1 X52.157 Y104.558 E0.21861 ; perimeter
G1 X54.665 Y106.663 E0.13487 ; perimeter
G1 X54.359 Y107.027 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.369 Y107.631 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X51.861 Y105.527 E0.13487 ; perimeter
G1 X49.412 Y108.446 E0.15696 ; perimeter
G1 X48.298 Y107.510 E0.05995 ; perimeter
G1 X57.805 Y96.180 E0.60929 ; perimeter
G1 X58.919 Y97.116 E0.05995 ; perimeter
G1 X56.470 Y100.034 E0.15696 ; perimeter
G1 X58.978 Y102.139 E0.13487 ; perimeter
G1 X58.125 Y103.156 E0.05471 ; perimeter
G1 X55.617 Y101.052 E0.13487 ; perimeter
G1 X52.715 Y104.510 E0.18596 ; perimeter
G1 X55.223 Y106.614 E0.13487 ; perimeter
G1 X54.408 Y107.585 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.098 Y107.337 F10800.000 ; move inwards before travel
G1 F8640
G1 X51.861 Y105.527 E-0.75605 ; wipe and retract
G1 X51.850 Y105.540 E-0.00395 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X77.001 Y138.372 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.889 Y113.945 E1.56553 ; perimeter
G1 X47.534 Y113.611 E0.02007 ; perimeter
G1 X47.232 Y113.259 E0.01912 ; perimeter
G1 X46.977 Y112.882 E0.01874 ; perimeter
G1 X46.772 Y112.490 E0.01823 ; perimeter
G1 X46.620 Y112.090 E0.01763 ; perimeter
G1 X46.521 Y111.687 E0.01710 ; perimeter
G1 X46.481 Y111.358 E0.01365 ; perimeter
G1 X46.484 Y110.971 E0.01596 ; perimeter
G1 X46.538 Y110.608 E0.01512 ; perimeter
G1 X46.643 Y110.271 E0.01452 ; perimeter
G1 X46.794 Y109.964 E0.01409 ; perimeter
G1 X47.003 Y109.669 E0.01490 ; perimeter
G1 X47.894 Y108.608 E0.05708 ; perimeter
G1 X48.402 Y109.034 E0.02729 ; perimeter
G1 X47.637 Y109.945 E0.04901 ; perimeter
G1 X47.409 Y110.285 E0.01685 ; perimeter
G1 X47.243 Y110.696 E0.01826 ; perimeter
G1 X47.164 Y111.134 E0.01834 ; perimeter
G1 X47.168 Y111.582 E0.01847 ; perimeter
G1 X47.251 Y112.027 E0.01864 ; perimeter
G1 X47.409 Y112.456 E0.01884 ; perimeter
G1 X47.634 Y112.860 E0.01903 ; perimeter
G1 X47.918 Y113.228 E0.01917 ; perimeter
G1 X48.237 Y113.538 E0.01834 ; perimeter
G1 X77.345 Y137.962 E1.56530 ; perimeter
G1 X77.039 Y138.326 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X77.049 Y138.930 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X47.626 Y114.241 E1.58231 ; perimeter
G1 X47.247 Y113.886 E0.02142 ; perimeter
G1 X46.916 Y113.500 E0.02094 ; perimeter
G1 X46.636 Y113.086 E0.02059 ; perimeter
G1 X46.410 Y112.653 E0.02014 ; perimeter
G1 X46.241 Y112.208 E0.01960 ; perimeter
G1 X46.131 Y111.758 E0.01907 ; perimeter
G1 X46.085 Y111.381 E0.01565 ; perimeter
G1 X46.087 Y110.940 E0.01818 ; perimeter
G1 X46.151 Y110.519 E0.01753 ; perimeter
G1 X46.274 Y110.124 E0.01704 ; perimeter
G1 X46.452 Y109.761 E0.01668 ; perimeter
G1 X46.689 Y109.427 E0.01687 ; perimeter
G1 X47.845 Y108.049 E0.07407 ; perimeter
G1 X48.960 Y108.985 E0.05995 ; perimeter
G1 X47.954 Y110.184 E0.06447 ; perimeter
G1 X47.761 Y110.471 E0.01426 ; perimeter
G1 X47.626 Y110.806 E0.01489 ; perimeter
G1 X47.560 Y111.168 E0.01513 ; perimeter
G1 X47.564 Y111.543 E0.01546 ; perimeter
G1 X47.635 Y111.921 E0.01584 ; perimeter
G1 X47.771 Y112.290 E0.01621 ; perimeter
G1 X47.966 Y112.641 E0.01654 ; perimeter
G1 X48.214 Y112.964 E0.01678 ; perimeter
G1 X48.503 Y113.244 E0.01657 ; perimeter
G1 X77.903 Y137.913 E1.58105 ; perimeter
G1 X77.088 Y138.884 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.746 Y138.670 F10800.000 ; move inwards before travel
G1 F8640
G1 X74.563 Y136.773 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X150.728 Y114.365 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y113.845 E0.02140 ; perimeter
G1 X151.868 Y113.604 E0.04798 ; perimeter
G1 X151.868 Y114.115 E0.02103 ; perimeter
G1 X150.787 Y114.352 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y114.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.332 Y113.523 E0.05463 ; perimeter
G1 X152.264 Y113.104 E0.08145 ; perimeter
G1 X152.264 Y114.434 E0.05477 ; perimeter
G1 X150.390 Y114.837 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y115.329 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.935 Y113.200 E0.08769 ; perimeter
G1 X151.523 Y112.871 E0.06682 ; perimeter
G1 X152.660 Y112.604 E0.04810 ; perimeter
G1 X152.660 Y114.753 E0.08851 ; perimeter
G1 X150.727 Y115.176 E0.08153 ; perimeter
G1 X149.994 Y115.317 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.111 Y114.969 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.935 Y113.200 E-0.48910 ; wipe and retract
G1 X151.084 Y112.962 E-0.27090 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X165.131 Y117.271 E0.07363 ; perimeter
G1 X165.475 Y117.681 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.07363 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X172.151 Y125.638 E0.07363 ; perimeter
G1 X172.495 Y126.048 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.07363 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X165.180 Y116.713 E0.07363 ; perimeter
G1 X166.033 Y117.730 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.07363 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X172.200 Y125.080 E0.07363 ; perimeter
G1 X173.054 Y126.097 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.07363 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y139.253 E0.04011 ; perimeter
G1 X169.775 Y139.253 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.04011 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.462 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.857 E0.06321 ; perimeter
G1 X170.171 Y138.857 E0.21040 ; perimeter
G1 X170.171 Y140.391 E0.06321 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.522 Y140.789 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.298 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y138.460 E0.08630 ; perimeter
G1 X170.567 Y138.460 E0.24306 ; perimeter
G1 X170.567 Y140.555 E0.08630 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.358 Y141.185 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.282 Y140.786 F10800.000 ; move inwards before travel
G1 X165.686 Y140.278 ; move to first infill point
G1 F7168.6
G1 X166.395 Y139.569 E0.05230 ; infill
G1 X167.105 Y139.569 E0.03707 ; infill
G1 X166.598 Y140.077 E0.03747 ; infill
G1 X167.308 Y140.077 E0.03707 ; infill
G1 X167.815 Y139.569 E0.03747 ; infill
G1 X168.526 Y139.569 E0.03707 ; infill
G1 X168.018 Y140.077 E0.03747 ; infill
G1 X168.728 Y140.077 E0.03707 ; infill
G1 X169.236 Y139.569 E0.03747 ; infill
G1 X169.459 Y139.569 E0.01163 ; infill
G1 X169.459 Y140.056 E0.02544 ; infill
G1 X169.238 Y140.278 E0.01633 ; infill
G1 F8640
G1 X169.459 Y140.056 E-0.07222 ; wipe and retract
G1 X169.459 Y139.569 E-0.11252 ; wipe and retract
G1 X169.236 Y139.569 E-0.05147 ; wipe and retract
G1 X168.728 Y140.077 E-0.16575 ; wipe and retract
G1 X168.018 Y140.077 E-0.16399 ; wipe and retract
G1 X168.526 Y139.569 E-0.16575 ; wipe and retract
G1 X168.403 Y139.569 E-0.02830 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X172.429 Y138.372 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X172.085 Y137.962 E0.02205 ; perimeter
G1 X201.192 Y113.538 E1.56530 ; perimeter
G1 X201.512 Y113.228 E0.01834 ; perimeter
G1 X201.796 Y112.860 E0.01917 ; perimeter
G1 X202.021 Y112.456 E0.01903 ; perimeter
G1 X202.182 Y112.016 E0.01930 ; perimeter
G1 X202.263 Y111.484 E0.02218 ; perimeter
G1 X202.266 Y111.134 E0.01443 ; perimeter
G1 X202.186 Y110.696 E0.01834 ; perimeter
G1 X202.021 Y110.285 E0.01826 ; perimeter
G1 X201.793 Y109.945 E0.01685 ; perimeter
G1 X201.028 Y109.034 E0.04901 ; perimeter
G1 X201.536 Y108.608 E0.02729 ; perimeter
G1 X202.345 Y109.573 E0.05189 ; perimeter
G1 X202.638 Y109.969 E0.02031 ; perimeter
G1 X202.787 Y110.271 E0.01385 ; perimeter
G1 X202.892 Y110.610 E0.01460 ; perimeter
G1 X202.940 Y110.914 E0.01271 ; perimeter
G1 X202.948 Y111.358 E0.01829 ; perimeter
G1 X202.895 Y111.758 E0.01660 ; perimeter
G1 X202.811 Y112.087 E0.01400 ; perimeter
G1 X202.660 Y112.485 E0.01753 ; perimeter
G1 X202.394 Y112.973 E0.02288 ; perimeter
G1 X202.199 Y113.257 E0.01423 ; perimeter
G1 X201.896 Y113.611 E0.01919 ; perimeter
G1 X201.540 Y113.945 E0.02007 ; perimeter
G1 X172.475 Y138.333 E1.56306 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.380 Y138.930 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.527 Y137.913 E0.05471 ; perimeter
G1 X200.927 Y113.244 E1.58105 ; perimeter
G1 X201.215 Y112.964 E0.01657 ; perimeter
G1 X201.464 Y112.641 E0.01678 ; perimeter
G1 X201.659 Y112.290 E0.01654 ; perimeter
G1 X201.796 Y111.917 E0.01638 ; perimeter
G1 X201.867 Y111.452 E0.01938 ; perimeter
G1 X201.869 Y111.168 E0.01172 ; perimeter
G1 X201.803 Y110.806 E0.01513 ; perimeter
G1 X201.669 Y110.471 E0.01489 ; perimeter
G1 X201.476 Y110.184 E0.01426 ; perimeter
G1 X200.470 Y108.985 E0.06447 ; perimeter
G1 X201.584 Y108.049 E0.05995 ; perimeter
G1 X202.657 Y109.327 E0.06873 ; perimeter
G1 X202.978 Y109.763 E0.02228 ; perimeter
G1 X203.156 Y110.124 E0.01659 ; perimeter
G1 X203.279 Y110.520 E0.01707 ; perimeter
G1 X203.336 Y110.880 E0.01503 ; perimeter
G1 X203.345 Y111.381 E0.02065 ; perimeter
G1 X203.285 Y111.833 E0.01878 ; perimeter
G1 X203.189 Y112.207 E0.01589 ; perimeter
G1 X203.021 Y112.651 E0.01957 ; perimeter
G1 X202.732 Y113.180 E0.02483 ; perimeter
G1 X202.514 Y113.499 E0.01594 ; perimeter
G1 X202.183 Y113.886 E0.02096 ; perimeter
G1 X201.804 Y114.241 E0.02142 ; perimeter
G1 X172.426 Y138.892 E1.57983 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.311 Y138.536 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.527 Y137.913 E-0.30695 ; wipe and retract
G1 X173.030 Y136.652 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X195.109 Y107.073 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X194.765 Y106.663 E0.02205 ; perimeter
G1 X197.273 Y104.558 E0.13487 ; perimeter
G1 X193.862 Y100.493 E0.21861 ; perimeter
G1 X191.354 Y102.598 E0.13486 ; perimeter
G1 X191.010 Y102.188 E0.02205 ; perimeter
G1 X193.518 Y100.083 E0.13487 ; perimeter
G1 X191.069 Y97.165 E0.15696 ; perimeter
G1 X191.576 Y96.739 E0.02729 ; perimeter
G1 X200.574 Y107.461 E0.57663 ; perimeter
G1 X200.066 Y107.887 E0.02729 ; perimeter
G1 X197.617 Y104.969 E0.15696 ; perimeter
G1 X195.155 Y107.034 E0.13239 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.060 Y107.631 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X194.207 Y106.614 E0.05471 ; perimeter
G1 X196.715 Y104.510 E0.13487 ; perimeter
G1 X193.813 Y101.052 E0.18596 ; perimeter
G1 X191.305 Y103.156 E0.13486 ; perimeter
G1 X190.452 Y102.139 E0.05471 ; perimeter
G1 X192.959 Y100.034 E0.13487 ; perimeter
G1 X190.510 Y97.116 E0.15696 ; perimeter
G1 X191.625 Y96.180 E0.05995 ; perimeter
G1 X201.132 Y107.510 E0.60929 ; perimeter
G1 X200.017 Y108.446 E0.05995 ; perimeter
G1 X197.568 Y105.527 E0.15696 ; perimeter
G1 X195.106 Y107.593 E0.13239 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.105 Y107.234 F10800.000 ; move inwards before travel
G1 F8640
G1 X194.207 Y106.614 E-0.30695 ; wipe and retract
G1 X195.710 Y105.353 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
G1 X159.504 Y115.065 ; move to first perimeter point
G1 Z18.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.160 Y114.655 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.18737 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X186.502 Y96.023 E1.00677 ; perimeter
G1 X186.893 Y95.730 E0.02011 ; perimeter
G1 X187.186 Y95.556 E0.01406 ; perimeter
G1 X187.713 Y95.307 E0.02399 ; perimeter
G1 X188.129 Y95.175 E0.01798 ; perimeter
G1 X188.549 Y95.095 E0.01763 ; perimeter
G1 X188.963 Y95.068 E0.01710 ; perimeter
G1 X189.290 Y95.085 E0.01349 ; perimeter
G1 X189.729 Y95.171 E0.01843 ; perimeter
G1 X190.021 Y95.271 E0.01271 ; perimeter
G1 X190.336 Y95.433 E0.01460 ; perimeter
G1 X190.586 Y95.616 E0.01274 ; perimeter
G1 X190.028 Y96.084 E0.03001 ; perimeter
G1 X189.814 Y95.951 E0.01038 ; perimeter
G1 X189.397 Y95.796 E0.01834 ; perimeter
G1 X188.954 Y95.722 E0.01847 ; perimeter
G1 X188.502 Y95.728 E0.01864 ; perimeter
G1 X188.052 Y95.808 E0.01884 ; perimeter
G1 X187.615 Y95.960 E0.01903 ; perimeter
G1 X187.203 Y96.175 E0.01914 ; perimeter
G1 X186.866 Y96.418 E0.01712 ; perimeter
G1 X167.976 Y112.267 E1.01583 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.550 Y115.027 E0.17687 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.455 Y115.624 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X158.601 Y114.606 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.20964 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X186.256 Y95.712 E1.00128 ; perimeter
G1 X186.672 Y95.400 E0.02143 ; perimeter
G1 X187.000 Y95.205 E0.01571 ; perimeter
G1 X187.568 Y94.937 E0.02587 ; perimeter
G1 X188.032 Y94.790 E0.02004 ; perimeter
G1 X188.499 Y94.701 E0.01960 ; perimeter
G1 X188.961 Y94.671 E0.01907 ; perimeter
G1 X189.339 Y94.691 E0.01560 ; perimeter
G1 X189.832 Y94.787 E0.02070 ; perimeter
G1 X190.177 Y94.906 E0.01503 ; perimeter
G1 X190.545 Y95.095 E0.01707 ; perimeter
G1 X190.872 Y95.334 E0.01668 ; perimeter
G1 X191.173 Y95.641 E0.01769 ; perimeter
G1 X190.040 Y96.591 E0.06089 ; perimeter
G1 X189.945 Y96.500 E0.00544 ; perimeter
G1 X189.638 Y96.309 E0.01489 ; perimeter
G1 X189.294 Y96.181 E0.01513 ; perimeter
G1 X188.924 Y96.119 E0.01546 ; perimeter
G1 X188.539 Y96.124 E0.01584 ; perimeter
G1 X188.152 Y96.193 E0.01621 ; perimeter
G1 X187.773 Y96.324 E0.01654 ; perimeter
G1 X187.412 Y96.513 E0.01676 ; perimeter
G1 X187.110 Y96.731 E0.01535 ; perimeter
G1 X168.120 Y112.663 E1.02116 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
M73 P83 R22
G1 X159.501 Y115.585 E0.18726 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.434 Y115.224 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;18.75


G1 F8640
G1 X158.601 Y114.606 E-0.30695 ; wipe and retract
G1 X160.105 Y113.345 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;18.75
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y101.107 E0.04011 ; perimeter
G1 X84.255 Y101.107 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.04011 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.253 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.711 E0.06321 ; perimeter
G1 X84.651 Y100.711 E0.21040 ; perimeter
G1 X84.651 Y102.245 E0.06321 ; perimeter
G1 X84.296 Y102.600 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.417 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y100.314 E0.08630 ; perimeter
G1 X85.047 Y100.314 E0.24305 ; perimeter
G1 X85.047 Y102.409 E0.08630 ; perimeter
G1 X84.460 Y102.997 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.087 Y102.814 F10800.000 ; move inwards before travel
G1 X84.028 Y102.131 ; move to first infill point
G1 F7168.62
G1 X83.320 Y101.423 E0.05230 ; infill
G1 X82.610 Y101.423 E0.03707 ; infill
G1 X83.117 Y101.931 E0.03747 ; infill
G1 X82.407 Y101.931 E0.03707 ; infill
G1 X81.899 Y101.423 E0.03747 ; infill
G1 X81.189 Y101.423 E0.03707 ; infill
G1 X81.697 Y101.931 E0.03747 ; infill
G1 X80.987 Y101.931 E0.03707 ; infill
G1 X80.479 Y101.423 E0.03747 ; infill
G1 X80.256 Y101.423 E0.01163 ; infill
G1 X80.256 Y101.910 E0.02544 ; infill
G1 X80.477 Y102.131 E0.01631 ; infill
G1 F8640
G1 X80.256 Y101.910 E-0.07217 ; wipe and retract
G1 X80.256 Y101.423 E-0.11255 ; wipe and retract
G1 X80.479 Y101.423 E-0.05144 ; wipe and retract
G1 X80.987 Y101.931 E-0.16576 ; wipe and retract
G1 X81.697 Y101.931 E-0.16399 ; wipe and retract
G1 X81.189 Y101.423 E-0.16576 ; wipe and retract
G1 X81.312 Y101.423 E-0.02834 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X77.282 Y87.954 E0.07029 ; perimeter
G1 X77.626 Y87.544 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.07029 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X84.302 Y79.587 E0.07029 ; perimeter
G1 X84.646 Y79.177 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.07029 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X76.723 Y88.003 E0.07029 ; perimeter
G1 X77.577 Y86.986 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.07029 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X83.744 Y79.636 E0.07029 ; perimeter
G1 X84.597 Y78.619 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.07029 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X98.987 Y76.219 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y75.969 E0.04806 ; perimeter
G1 X97.847 Y75.459 E0.02102 ; perimeter
G1 X98.987 Y75.699 E0.04798 ; perimeter
G1 X98.987 Y76.159 E0.01893 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y76.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.451 Y76.288 E0.08142 ; perimeter
G1 X97.451 Y74.958 E0.05476 ; perimeter
G1 X99.383 Y75.376 E0.08144 ; perimeter
G1 X99.383 Y76.643 E0.05217 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y77.183 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.988 Y77.030 E0.03321 ; perimeter
G1 X97.055 Y76.607 E0.08153 ; perimeter
G1 X97.055 Y74.458 E0.08850 ; perimeter
G1 X98.164 Y74.719 E0.04696 ; perimeter
G1 X99.780 Y75.054 E0.06796 ; perimeter
G1 X99.780 Y77.123 E0.08522 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.421 Y77.006 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.988 Y77.030 E-0.18405 ; wipe and retract
G1 X97.055 Y76.607 E-0.45698 ; wipe and retract
G1 X97.055 Y76.091 E-0.11896 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X90.019 Y76.758 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.16905 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X62.739 Y58.178 E1.02178 ; perimeter
G1 X62.378 Y57.917 E0.01834 ; perimeter
G1 X61.966 Y57.701 E0.01917 ; perimeter
G1 X61.529 Y57.550 E0.01903 ; perimeter
G1 X61.079 Y57.469 E0.01884 ; perimeter
G1 X60.626 Y57.464 E0.01864 ; perimeter
G1 X60.184 Y57.538 E0.01847 ; perimeter
G1 X59.767 Y57.692 E0.01834 ; perimeter
G1 X59.553 Y57.826 E0.01039 ; perimeter
G1 X58.995 Y57.357 E0.03001 ; perimeter
G1 X59.243 Y57.176 E0.01266 ; perimeter
G1 X59.555 Y57.014 E0.01448 ; perimeter
G1 X59.903 Y56.897 E0.01515 ; perimeter
G1 X60.230 Y56.834 E0.01369 ; perimeter
G1 X60.684 Y56.810 E0.01876 ; perimeter
G1 X61.035 Y56.836 E0.01449 ; perimeter
G1 X61.457 Y56.917 E0.01769 ; perimeter
G1 X61.872 Y57.050 E0.01797 ; perimeter
G1 X62.381 Y57.289 E0.02313 ; perimeter
G1 X62.689 Y57.472 E0.01479 ; perimeter
G1 X63.078 Y57.764 E0.02004 ; perimeter
G1 X81.934 Y73.586 E1.01399 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
M73 Q83 S23
G1 X90.363 Y76.348 E0.17707 ; perimeter
G1 X90.058 Y76.713 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X90.068 Y77.317 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.17943 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X62.495 Y58.490 E1.02714 ; perimeter
G1 X62.169 Y58.255 E0.01657 ; perimeter
G1 X61.808 Y58.066 E0.01678 ; perimeter
G1 X61.429 Y57.934 E0.01654 ; perimeter
G1 X61.041 Y57.865 E0.01621 ; perimeter
G1 X60.657 Y57.860 E0.01584 ; perimeter
G1 X60.287 Y57.922 E0.01546 ; perimeter
G1 X59.942 Y58.050 E0.01513 ; perimeter
G1 X59.635 Y58.241 E0.01489 ; perimeter
G1 X59.540 Y58.332 E0.00544 ; perimeter
G1 X58.408 Y57.382 E0.06089 ; perimeter
G1 X58.708 Y57.076 E0.01764 ; perimeter
G1 X59.033 Y56.838 E0.01663 ; perimeter
G1 X59.400 Y56.649 E0.01698 ; perimeter
G1 X59.802 Y56.512 E0.01750 ; perimeter
G1 X60.182 Y56.440 E0.01591 ; perimeter
G1 X60.689 Y56.413 E0.02092 ; perimeter
G1 X61.088 Y56.443 E0.01648 ; perimeter
G1 X61.555 Y56.533 E0.01960 ; perimeter
G1 X62.017 Y56.680 E0.02001 ; perimeter
G1 X62.567 Y56.938 E0.02500 ; perimeter
G1 X62.910 Y57.142 E0.01645 ; perimeter
G1 X63.325 Y57.453 E0.02136 ; perimeter
G1 X82.078 Y73.189 E1.00849 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X90.922 Y76.300 E0.19934 ; perimeter
G1 X90.107 Y77.271 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.786 Y77.033 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.556 Y75.190 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X54.467 Y68.810 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X51.964 Y66.710 E0.13459 ; perimeter
G1 X49.515 Y69.629 E0.15696 ; perimeter
G1 X49.007 Y69.203 E0.02729 ; perimeter
G1 X58.004 Y58.480 E0.57663 ; perimeter
G1 X58.512 Y58.906 E0.02729 ; perimeter
G1 X56.063 Y61.825 E0.15696 ; perimeter
G1 X58.566 Y63.925 E0.13459 ; perimeter
G1 X58.222 Y64.335 E0.02205 ; perimeter
G1 X55.719 Y62.235 E0.13459 ; perimeter
G1 X52.308 Y66.300 E0.21861 ; perimeter
G1 X54.811 Y68.400 E0.13459 ; perimeter
G1 X54.505 Y68.764 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.515 Y69.368 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X52.013 Y67.268 E0.13459 ; perimeter
G1 X49.564 Y70.187 E0.15696 ; perimeter
G1 X48.449 Y69.251 E0.05995 ; perimeter
G1 X57.956 Y57.922 E0.60929 ; perimeter
G1 X59.070 Y58.857 E0.05995 ; perimeter
G1 X56.621 Y61.776 E0.15696 ; perimeter
G1 X59.124 Y63.876 E0.13459 ; perimeter
G1 X58.271 Y64.893 E0.05471 ; perimeter
G1 X55.768 Y62.793 E0.13459 ; perimeter
G1 X52.866 Y66.251 E0.18596 ; perimeter
G1 X55.369 Y68.351 E0.13459 ; perimeter
G1 X54.554 Y69.322 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.244 Y69.074 F10800.000 ; move inwards before travel
G1 F8640
G1 X52.013 Y67.268 E-0.75453 ; wipe and retract
G1 X51.997 Y67.286 E-0.00547 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X77.094 Y100.065 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X48.040 Y75.686 E1.56244 ; perimeter
G1 X47.686 Y75.354 E0.02001 ; perimeter
G1 X47.385 Y75.002 E0.01907 ; perimeter
G1 X47.130 Y74.627 E0.01869 ; perimeter
G1 X46.925 Y74.236 E0.01819 ; perimeter
G1 X46.772 Y73.835 E0.01769 ; perimeter
G1 X46.684 Y73.491 E0.01460 ; perimeter
G1 X46.632 Y73.090 E0.01666 ; perimeter
G1 X46.635 Y72.708 E0.01577 ; perimeter
G1 X46.690 Y72.346 E0.01507 ; perimeter
G1 X46.795 Y72.011 E0.01448 ; perimeter
G1 X46.946 Y71.705 E0.01405 ; perimeter
G1 X47.154 Y71.411 E0.01486 ; perimeter
G1 X48.045 Y70.349 E0.05708 ; perimeter
G1 X48.553 Y70.775 E0.02729 ; perimeter
G1 X47.788 Y71.686 E0.04901 ; perimeter
G1 X47.560 Y72.026 E0.01685 ; perimeter
G1 X47.395 Y72.437 E0.01826 ; perimeter
G1 X47.315 Y72.875 E0.01834 ; perimeter
G1 X47.319 Y73.323 E0.01847 ; perimeter
G1 X47.403 Y73.768 E0.01864 ; perimeter
G1 X47.560 Y74.197 E0.01884 ; perimeter
G1 X47.785 Y74.601 E0.01903 ; perimeter
G1 X48.069 Y74.970 E0.01917 ; perimeter
G1 X48.389 Y75.279 E0.01834 ; perimeter
G1 X77.438 Y99.655 E1.56222 ; perimeter
G1 X77.133 Y100.019 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X77.143 Y100.624 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X47.777 Y75.983 E1.57922 ; perimeter
G1 X47.399 Y75.628 E0.02135 ; perimeter
G1 X47.069 Y75.243 E0.02087 ; perimeter
G1 X46.789 Y74.831 E0.02053 ; perimeter
G1 X46.563 Y74.399 E0.02009 ; perimeter
G1 X46.393 Y73.955 E0.01960 ; perimeter
G1 X46.294 Y73.566 E0.01652 ; perimeter
G1 X46.235 Y73.115 E0.01876 ; perimeter
G1 X46.239 Y72.676 E0.01807 ; perimeter
G1 X46.303 Y72.257 E0.01748 ; perimeter
G1 X46.426 Y71.863 E0.01698 ; perimeter
G1 X46.604 Y71.501 E0.01663 ; perimeter
G1 X46.841 Y71.168 E0.01682 ; perimeter
G1 X47.996 Y69.791 E0.07407 ; perimeter
G1 X49.111 Y70.726 E0.05995 ; perimeter
G1 X48.105 Y71.925 E0.06447 ; perimeter
G1 X47.912 Y72.212 E0.01426 ; perimeter
G1 X47.777 Y72.548 E0.01489 ; perimeter
G1 X47.711 Y72.909 E0.01513 ; perimeter
G1 X47.715 Y73.284 E0.01546 ; perimeter
G1 X47.786 Y73.662 E0.01584 ; perimeter
G1 X47.922 Y74.032 E0.01621 ; perimeter
G1 X48.117 Y74.382 E0.01654 ; perimeter
G1 X48.365 Y74.705 E0.01678 ; perimeter
G1 X48.654 Y74.985 E0.01657 ; perimeter
G1 X77.997 Y99.606 E1.57796 ; perimeter
G1 X77.182 Y100.578 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.840 Y100.363 F10800.000 ; move inwards before travel
G1 F8640
G1 X74.657 Y98.466 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X151.013 Y76.219 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y75.699 E0.02140 ; perimeter
G1 X152.153 Y75.459 E0.04798 ; perimeter
G1 X152.153 Y75.969 E0.02102 ; perimeter
G1 X151.072 Y76.206 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y76.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.617 Y75.376 E0.05464 ; perimeter
G1 X152.549 Y74.958 E0.08144 ; perimeter
G1 X152.549 Y76.288 E0.05476 ; perimeter
G1 X150.676 Y76.691 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y77.183 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.220 Y75.054 E0.08770 ; perimeter
G1 X151.836 Y74.719 E0.06796 ; perimeter
G1 X152.945 Y74.458 E0.04696 ; perimeter
G1 X152.945 Y76.607 E0.08851 ; perimeter
G1 X151.012 Y77.030 E0.08153 ; perimeter
G1 X150.279 Y77.171 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.396 Y76.823 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.220 Y75.054 E-0.48911 ; wipe and retract
G1 X151.369 Y74.815 E-0.27089 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X165.354 Y79.177 E0.07029 ; perimeter
G1 X165.698 Y79.587 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.07029 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X172.374 Y87.544 E0.07029 ; perimeter
G1 X172.718 Y87.954 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.07029 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X165.403 Y78.619 E0.07029 ; perimeter
G1 X166.256 Y79.636 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.07029 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X172.423 Y86.986 E0.07029 ; perimeter
G1 X173.277 Y88.003 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.07029 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y101.107 E0.04011 ; perimeter
G1 X170.060 Y101.107 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.04011 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.747 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.711 E0.06321 ; perimeter
G1 X170.456 Y100.711 E0.21040 ; perimeter
G1 X170.456 Y102.245 E0.06321 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.807 Y102.643 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.583 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y100.314 E0.08630 ; perimeter
G1 X170.853 Y100.314 E0.24306 ; perimeter
G1 X170.853 Y102.409 E0.08630 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.643 Y103.039 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.567 Y102.640 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.953 Y102.409 E-0.21581 ; wipe and retract
G1 X164.953 Y100.314 E-0.48370 ; wipe and retract
G1 X165.215 Y100.314 E-0.06050 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X166.282 Y102.131 ; move to first infill point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.6
G1 X166.061 Y101.910 E0.01632 ; infill
G1 X166.061 Y101.423 E0.02544 ; infill
G1 X166.284 Y101.423 E0.01163 ; infill
G1 X166.792 Y101.931 E0.03747 ; infill
G1 X167.502 Y101.931 E0.03707 ; infill
G1 X166.994 Y101.423 E0.03747 ; infill
G1 X167.704 Y101.423 E0.03707 ; infill
G1 X168.212 Y101.931 E0.03747 ; infill
G1 X168.922 Y101.931 E0.03707 ; infill
G1 X168.415 Y101.423 E0.03747 ; infill
G1 X169.125 Y101.423 E0.03707 ; infill
G1 X169.833 Y102.131 E0.05230 ; infill
G1 F8640
G1 X169.125 Y101.423 E-0.23134 ; wipe and retract
G1 X168.415 Y101.423 E-0.16399 ; wipe and retract
G1 X168.922 Y101.931 E-0.16575 ; wipe and retract
G1 X168.212 Y101.931 E-0.16399 ; wipe and retract
G1 X168.105 Y101.824 E-0.03493 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X172.906 Y100.065 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X172.562 Y99.655 E0.02205 ; perimeter
G1 X201.611 Y75.279 E1.56222 ; perimeter
G1 X201.931 Y74.970 E0.01834 ; perimeter
G1 X202.215 Y74.601 E0.01917 ; perimeter
G1 X202.440 Y74.197 E0.01903 ; perimeter
G1 X202.601 Y73.759 E0.01922 ; perimeter
G1 X202.682 Y73.246 E0.02142 ; perimeter
G1 X202.685 Y72.875 E0.01528 ; perimeter
G1 X202.605 Y72.437 E0.01834 ; perimeter
G1 X202.440 Y72.026 E0.01826 ; perimeter
G1 X202.212 Y71.686 E0.01685 ; perimeter
G1 X201.447 Y70.775 E0.04901 ; perimeter
G1 X201.955 Y70.349 E0.02729 ; perimeter
G1 X202.789 Y71.343 E0.05343 ; perimeter
G1 X203.056 Y71.709 E0.01868 ; perimeter
G1 X203.205 Y72.011 E0.01387 ; perimeter
G1 X203.310 Y72.347 E0.01454 ; perimeter
G1 X203.360 Y72.666 E0.01327 ; perimeter
G1 X203.368 Y73.093 E0.01761 ; perimeter
G1 X203.316 Y73.491 E0.01654 ; perimeter
G1 X203.228 Y73.835 E0.01460 ; perimeter
G1 X203.077 Y74.232 E0.01750 ; perimeter
G1 X202.821 Y74.702 E0.02206 ; perimeter
G1 X202.616 Y75.001 E0.01494 ; perimeter
G1 X202.314 Y75.354 E0.01913 ; perimeter
G1 X201.960 Y75.686 E0.02001 ; perimeter
G1 X172.952 Y100.027 E1.55997 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.857 Y100.624 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X172.003 Y99.606 E0.05471 ; perimeter
G1 X201.346 Y74.985 E1.57796 ; perimeter
G1 X201.635 Y74.705 E0.01657 ; perimeter
G1 X201.883 Y74.382 E0.01678 ; perimeter
G1 X202.078 Y74.032 E0.01654 ; perimeter
G1 X202.215 Y73.659 E0.01635 ; perimeter
G1 X202.286 Y73.213 E0.01862 ; perimeter
G1 X202.289 Y72.909 E0.01251 ; perimeter
G1 X202.223 Y72.548 E0.01513 ; perimeter
G1 X202.088 Y72.212 E0.01489 ; perimeter
G1 X201.895 Y71.925 E0.01426 ; perimeter
G1 X200.889 Y70.726 E0.06447 ; perimeter
G1 X202.004 Y69.791 E0.05995 ; perimeter
G1 X203.101 Y71.098 E0.07030 ; perimeter
G1 X203.397 Y71.502 E0.02064 ; perimeter
G1 X203.574 Y71.863 E0.01657 ; perimeter
G1 X203.697 Y72.257 E0.01701 ; perimeter
G1 X203.756 Y72.631 E0.01560 ; perimeter
G1 X203.764 Y73.116 E0.01995 ; perimeter
G1 X203.706 Y73.566 E0.01872 ; perimeter
G1 X203.607 Y73.955 E0.01652 ; perimeter
G1 X203.438 Y74.398 E0.01953 ; perimeter
G1 X203.160 Y74.909 E0.02399 ; perimeter
G1 X202.931 Y75.243 E0.01666 ; perimeter
G1 X202.601 Y75.628 E0.02090 ; perimeter
G1 X202.223 Y75.983 E0.02135 ; perimeter
G1 X172.903 Y100.585 E1.57675 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.787 Y100.230 F10800.000 ; move inwards before travel
G1 F8640
G1 X172.003 Y99.606 E-0.30695 ; wipe and retract
G1 X173.506 Y98.345 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X195.533 Y68.810 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X195.189 Y68.400 E0.02205 ; perimeter
G1 X197.692 Y66.300 E0.13459 ; perimeter
G1 X194.281 Y62.235 E0.21861 ; perimeter
G1 X191.778 Y64.335 E0.13459 ; perimeter
G1 X191.434 Y63.925 E0.02205 ; perimeter
G1 X193.937 Y61.825 E0.13459 ; perimeter
G1 X191.488 Y58.906 E0.15696 ; perimeter
G1 X191.996 Y58.480 E0.02729 ; perimeter
G1 X200.993 Y69.203 E0.57663 ; perimeter
G1 X200.485 Y69.629 E0.02729 ; perimeter
G1 X198.036 Y66.710 E0.15696 ; perimeter
G1 X195.579 Y68.771 E0.13212 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.485 Y69.368 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X194.631 Y68.351 E0.05471 ; perimeter
G1 X197.134 Y66.251 E0.13459 ; perimeter
G1 X194.232 Y62.793 E0.18596 ; perimeter
G1 X191.729 Y64.893 E0.13459 ; perimeter
G1 X190.876 Y63.876 E0.05471 ; perimeter
G1 X193.379 Y61.776 E0.13459 ; perimeter
G1 X190.930 Y58.857 E0.15696 ; perimeter
G1 X192.044 Y57.922 E0.05995 ; perimeter
G1 X201.551 Y69.251 E0.60929 ; perimeter
G1 X200.436 Y70.187 E0.05995 ; perimeter
G1 X197.987 Y67.268 E0.15696 ; perimeter
G1 X195.531 Y69.330 E0.13212 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.530 Y68.971 F10800.000 ; move inwards before travel
G1 F8640
G1 X194.631 Y68.351 E-0.30695 ; wipe and retract
G1 X196.134 Y67.090 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X159.981 Y76.758 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.637 Y76.348 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.17707 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X186.922 Y57.764 E1.01399 ; perimeter
G1 X187.311 Y57.472 E0.02004 ; perimeter
G1 X187.619 Y57.289 E0.01479 ; perimeter
G1 X188.128 Y57.050 E0.02314 ; perimeter
G1 X188.543 Y56.917 E0.01797 ; perimeter
G1 X188.962 Y56.837 E0.01759 ; perimeter
G1 X189.375 Y56.809 E0.01703 ; perimeter
G1 X189.717 Y56.827 E0.01411 ; perimeter
G1 X190.139 Y56.909 E0.01772 ; perimeter
G1 X190.444 Y57.014 E0.01327 ; perimeter
G1 X190.757 Y57.176 E0.01454 ; perimeter
G1 X191.005 Y57.357 E0.01266 ; perimeter
G1 X190.447 Y57.826 E0.03001 ; perimeter
G1 X190.233 Y57.692 E0.01038 ; perimeter
G1 X189.816 Y57.538 E0.01834 ; perimeter
G1 X189.374 Y57.464 E0.01847 ; perimeter
G1 X188.921 Y57.469 E0.01864 ; perimeter
G1 X188.471 Y57.550 E0.01884 ; perimeter
G1 X188.034 Y57.701 E0.01903 ; perimeter
G1 X187.623 Y57.916 E0.01915 ; perimeter
G1 X187.282 Y58.162 E0.01731 ; perimeter
G1 X168.261 Y74.121 E1.02284 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X160.027 Y76.720 E0.16657 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.932 Y77.317 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.078 Y76.300 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.19934 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X186.675 Y57.453 E1.00849 ; perimeter
G1 X187.090 Y57.142 E0.02136 ; perimeter
G1 X187.433 Y56.938 E0.01645 ; perimeter
G1 X187.983 Y56.680 E0.02500 ; perimeter
G1 X188.445 Y56.533 E0.02001 ; perimeter
G1 X188.911 Y56.443 E0.01956 ; perimeter
G1 X189.372 Y56.412 E0.01902 ; perimeter
G1 X189.765 Y56.433 E0.01622 ; perimeter
G1 X190.242 Y56.525 E0.01999 ; perimeter
G1 X190.600 Y56.648 E0.01560 ; perimeter
G1 X190.967 Y56.838 E0.01701 ; perimeter
G1 X191.292 Y57.076 E0.01663 ; perimeter
G1 X191.592 Y57.382 E0.01764 ; perimeter
G1 X190.460 Y58.332 E0.06089 ; perimeter
G1 X190.365 Y58.241 E0.00544 ; perimeter
G1 X190.058 Y58.050 E0.01489 ; perimeter
G1 X189.713 Y57.922 E0.01513 ; perimeter
G1 X189.343 Y57.860 E0.01546 ; perimeter
G1 X188.959 Y57.865 E0.01584 ; perimeter
G1 X188.571 Y57.934 E0.01621 ; perimeter
G1 X188.192 Y58.066 E0.01654 ; perimeter
G1 X187.831 Y58.254 E0.01677 ; perimeter
G1 X187.525 Y58.475 E0.01554 ; perimeter
G1 X168.405 Y74.517 E1.02818 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X159.978 Y77.278 E0.17696 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.913 Y76.917 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.078 Y76.300 E-0.30695 ; wipe and retract
G1 X160.581 Y75.038 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y139.253 E0.04011 ; perimeter
G1 X83.970 Y139.253 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.04011 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.968 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.857 E0.06321 ; perimeter
G1 X84.366 Y138.857 E0.21040 ; perimeter
G1 X84.366 Y140.391 E0.06321 ; perimeter
G1 X84.010 Y140.747 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.132 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y138.460 E0.08630 ; perimeter
G1 X84.762 Y138.460 E0.24305 ; perimeter
G1 X84.762 Y140.555 E0.08630 ; perimeter
G1 X84.175 Y141.143 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.802 Y140.960 F10800.000 ; move inwards before travel
G1 X83.743 Y140.278 ; move to first infill point
G1 F7168.62
G1 X83.035 Y139.569 E0.05230 ; infill
G1 X82.324 Y139.569 E0.03707 ; infill
G1 X82.832 Y140.077 E0.03747 ; infill
G1 X82.122 Y140.077 E0.03707 ; infill
G1 X81.614 Y139.569 E0.03747 ; infill
G1 X80.904 Y139.569 E0.03707 ; infill
G1 X81.412 Y140.077 E0.03747 ; infill
G1 X80.701 Y140.077 E0.03707 ; infill
G1 X80.194 Y139.569 E0.03747 ; infill
G1 X79.971 Y139.569 E0.01163 ; infill
G1 X79.971 Y140.057 E0.02544 ; infill
G1 X80.192 Y140.278 E0.01631 ; infill
G1 F8640
G1 X79.971 Y140.057 E-0.07217 ; wipe and retract
G1 X79.971 Y139.569 E-0.11255 ; wipe and retract
G1 X80.194 Y139.569 E-0.05144 ; wipe and retract
G1 X80.701 Y140.077 E-0.16576 ; wipe and retract
G1 X81.412 Y140.077 E-0.16399 ; wipe and retract
G1 X80.904 Y139.569 E-0.16576 ; wipe and retract
G1 X81.027 Y139.569 E-0.02834 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X76.996 Y126.100 E0.07029 ; perimeter
G1 X77.341 Y125.690 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.07029 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X84.017 Y117.734 E0.07029 ; perimeter
G1 X84.361 Y117.323 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.07029 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X76.438 Y126.149 E0.07029 ; perimeter
G1 X77.292 Y125.132 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.07029 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X83.459 Y117.782 E0.07029 ; perimeter
G1 X84.312 Y116.765 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.07029 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X98.702 Y114.365 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y114.115 E0.04806 ; perimeter
G1 X97.562 Y113.605 E0.02102 ; perimeter
G1 X98.702 Y113.845 E0.04798 ; perimeter
G1 X98.702 Y114.305 E0.01893 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y114.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.166 Y114.434 E0.08142 ; perimeter
G1 X97.166 Y113.105 E0.05476 ; perimeter
G1 X99.098 Y113.523 E0.08144 ; perimeter
G1 X99.098 Y114.789 E0.05217 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y115.329 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.703 Y115.176 E0.03321 ; perimeter
G1 X96.769 Y114.753 E0.08153 ; perimeter
G1 X96.769 Y112.605 E0.08850 ; perimeter
G1 X97.879 Y112.865 E0.04696 ; perimeter
G1 X99.494 Y113.200 E0.06796 ; perimeter
G1 X99.494 Y115.269 E0.08522 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.135 Y115.152 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.703 Y115.176 E-0.18405 ; wipe and retract
G1 X96.769 Y114.753 E-0.45698 ; wipe and retract
G1 X96.769 Y114.238 E-0.11896 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X89.734 Y114.905 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.16905 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X62.453 Y96.324 E1.02178 ; perimeter
G1 X62.093 Y96.063 E0.01834 ; perimeter
G1 X61.680 Y95.847 E0.01917 ; perimeter
G1 X61.244 Y95.696 E0.01903 ; perimeter
G1 X60.794 Y95.615 E0.01884 ; perimeter
G1 X60.341 Y95.610 E0.01864 ; perimeter
G1 X59.899 Y95.684 E0.01847 ; perimeter
G1 X59.482 Y95.838 E0.01834 ; perimeter
G1 X59.268 Y95.972 E0.01039 ; perimeter
G1 X58.710 Y95.503 E0.03001 ; perimeter
G1 X58.957 Y95.322 E0.01266 ; perimeter
G1 X59.270 Y95.161 E0.01448 ; perimeter
G1 X59.618 Y95.043 E0.01515 ; perimeter
G1 X59.944 Y94.980 E0.01369 ; perimeter
G1 X60.399 Y94.956 E0.01876 ; perimeter
G1 X60.750 Y94.982 E0.01449 ; perimeter
G1 X61.172 Y95.064 E0.01769 ; perimeter
G1 X61.587 Y95.196 E0.01797 ; perimeter
G1 X62.095 Y95.435 E0.02313 ; perimeter
G1 X62.404 Y95.618 E0.01479 ; perimeter
G1 X62.793 Y95.910 E0.02004 ; perimeter
G1 X81.649 Y111.732 E1.01399 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X90.078 Y114.495 E0.17707 ; perimeter
G1 X89.773 Y114.859 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.783 Y115.463 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.17943 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X62.210 Y96.637 E1.02714 ; perimeter
G1 X61.884 Y96.401 E0.01657 ; perimeter
G1 X61.523 Y96.212 E0.01678 ; perimeter
G1 X61.144 Y96.081 E0.01654 ; perimeter
G1 X60.756 Y96.011 E0.01621 ; perimeter
G1 X60.372 Y96.007 E0.01584 ; perimeter
G1 X60.001 Y96.068 E0.01546 ; perimeter
G1 X59.657 Y96.196 E0.01513 ; perimeter
G1 X59.350 Y96.387 E0.01489 ; perimeter
G1 X59.255 Y96.479 E0.00544 ; perimeter
G1 X58.123 Y95.529 E0.06089 ; perimeter
G1 X58.423 Y95.223 E0.01764 ; perimeter
G1 X58.748 Y94.984 E0.01663 ; perimeter
G1 X59.114 Y94.795 E0.01698 ; perimeter
G1 X59.517 Y94.659 E0.01750 ; perimeter
G1 X59.896 Y94.586 E0.01591 ; perimeter
G1 X60.403 Y94.559 E0.02092 ; perimeter
G1 X60.802 Y94.589 E0.01648 ; perimeter
G1 X61.270 Y94.679 E0.01960 ; perimeter
G1 X61.732 Y94.826 E0.02001 ; perimeter
G1 X62.281 Y95.084 E0.02500 ; perimeter
G1 X62.625 Y95.288 E0.01645 ; perimeter
G1 X63.040 Y95.600 E0.02136 ; perimeter
G1 X81.793 Y111.335 E1.00849 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X90.637 Y114.446 E0.19934 ; perimeter
G1 X89.822 Y115.417 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.501 Y115.180 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.271 Y113.336 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X54.181 Y106.956 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X51.679 Y104.856 E0.13459 ; perimeter
G1 X49.230 Y107.775 E0.15696 ; perimeter
G1 X48.722 Y107.349 E0.02729 ; perimeter
G1 X57.719 Y96.626 E0.57663 ; perimeter
G1 X58.227 Y97.052 E0.02729 ; perimeter
G1 X55.778 Y99.971 E0.15696 ; perimeter
G1 X58.281 Y102.071 E0.13459 ; perimeter
G1 X57.937 Y102.481 E0.02205 ; perimeter
G1 X55.434 Y100.381 E0.13459 ; perimeter
G1 X52.023 Y104.446 E0.21861 ; perimeter
G1 X54.525 Y106.546 E0.13459 ; perimeter
G1 X54.220 Y106.910 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.230 Y107.515 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X51.727 Y105.414 E0.13459 ; perimeter
G1 X49.278 Y108.333 E0.15696 ; perimeter
G1 X48.164 Y107.398 E0.05995 ; perimeter
G1 X57.670 Y96.068 E0.60929 ; perimeter
G1 X58.785 Y97.003 E0.05995 ; perimeter
G1 X56.336 Y99.922 E0.15696 ; perimeter
G1 X58.839 Y102.022 E0.13459 ; perimeter
G1 X57.985 Y103.039 E0.05471 ; perimeter
G1 X55.483 Y100.939 E0.13459 ; perimeter
G1 X52.581 Y104.397 E0.18596 ; perimeter
G1 X55.084 Y106.497 E0.13459 ; perimeter
G1 X54.269 Y107.469 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.959 Y107.220 F10800.000 ; move inwards before travel
G1 F8640
G1 X51.727 Y105.414 E-0.75453 ; wipe and retract
G1 X51.712 Y105.433 E-0.00547 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X76.809 Y138.211 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.755 Y113.832 E1.56244 ; perimeter
G1 X47.401 Y113.500 E0.02001 ; perimeter
G1 X47.100 Y113.148 E0.01907 ; perimeter
G1 X46.845 Y112.773 E0.01869 ; perimeter
G1 X46.640 Y112.382 E0.01819 ; perimeter
G1 X46.487 Y111.981 E0.01769 ; perimeter
G1 X46.399 Y111.637 E0.01460 ; perimeter
G1 X46.347 Y111.236 E0.01666 ; perimeter
G1 X46.350 Y110.854 E0.01577 ; perimeter
G1 X46.405 Y110.492 E0.01507 ; perimeter
G1 X46.510 Y110.157 E0.01448 ; perimeter
G1 X46.660 Y109.851 E0.01405 ; perimeter
G1 X46.869 Y109.557 E0.01486 ; perimeter
G1 X47.760 Y108.495 E0.05708 ; perimeter
G1 X48.267 Y108.921 E0.02729 ; perimeter
G1 X47.503 Y109.833 E0.04901 ; perimeter
G1 X47.275 Y110.172 E0.01685 ; perimeter
G1 X47.109 Y110.583 E0.01826 ; perimeter
G1 X47.029 Y111.021 E0.01834 ; perimeter
G1 X47.034 Y111.469 E0.01847 ; perimeter
G1 X47.117 Y111.914 E0.01864 ; perimeter
G1 X47.275 Y112.344 E0.01884 ; perimeter
G1 X47.500 Y112.747 E0.01903 ; perimeter
G1 X47.784 Y113.116 E0.01917 ; perimeter
G1 X48.103 Y113.426 E0.01834 ; perimeter
G1 X77.153 Y137.801 E1.56222 ; perimeter
G1 X76.848 Y138.165 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.858 Y138.770 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X47.492 Y114.129 E1.57922 ; perimeter
G1 X47.114 Y113.774 E0.02135 ; perimeter
G1 X46.784 Y113.389 E0.02087 ; perimeter
G1 X46.504 Y112.977 E0.02053 ; perimeter
G1 X46.278 Y112.545 E0.02009 ; perimeter
G1 X46.108 Y112.101 E0.01960 ; perimeter
G1 X46.009 Y111.712 E0.01652 ; perimeter
G1 X45.950 Y111.261 E0.01876 ; perimeter
G1 X45.954 Y110.822 E0.01807 ; perimeter
G1 X46.018 Y110.403 E0.01748 ; perimeter
G1 X46.140 Y110.009 E0.01698 ; perimeter
G1 X46.319 Y109.647 E0.01663 ; perimeter
G1 X46.555 Y109.314 E0.01682 ; perimeter
G1 X47.711 Y107.937 E0.07407 ; perimeter
G1 X48.826 Y108.872 E0.05995 ; perimeter
G1 X47.820 Y110.071 E0.06447 ; perimeter
G1 X47.627 Y110.359 E0.01426 ; perimeter
G1 X47.492 Y110.694 E0.01489 ; perimeter
G1 X47.426 Y111.055 E0.01513 ; perimeter
G1 X47.430 Y111.431 E0.01546 ; perimeter
G1 X47.501 Y111.808 E0.01584 ; perimeter
G1 X47.636 Y112.178 E0.01621 ; perimeter
G1 X47.832 Y112.529 E0.01654 ; perimeter
G1 X48.080 Y112.851 E0.01678 ; perimeter
G1 X48.369 Y113.131 E0.01657 ; perimeter
G1 X77.712 Y137.752 E1.57796 ; perimeter
G1 X76.896 Y138.724 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.554 Y138.509 F10800.000 ; move inwards before travel
G1 F8640
G1 X74.372 Y136.612 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X150.728 Y114.365 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y113.845 E0.02140 ; perimeter
G1 X151.868 Y113.605 E0.04798 ; perimeter
G1 X151.868 Y114.115 E0.02102 ; perimeter
G1 X150.787 Y114.352 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y114.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.332 Y113.523 E0.05464 ; perimeter
G1 X152.264 Y113.105 E0.08144 ; perimeter
G1 X152.264 Y114.434 E0.05476 ; perimeter
G1 X150.390 Y114.837 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y115.329 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.935 Y113.200 E0.08770 ; perimeter
G1 X151.550 Y112.865 E0.06796 ; perimeter
G1 X152.660 Y112.604 E0.04696 ; perimeter
G1 X152.660 Y114.753 E0.08851 ; perimeter
G1 X150.727 Y115.176 E0.08153 ; perimeter
G1 X149.994 Y115.317 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.111 Y114.969 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.935 Y113.200 E-0.48911 ; wipe and retract
G1 X151.084 Y112.962 E-0.27089 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X165.069 Y117.323 E0.07029 ; perimeter
G1 X165.413 Y117.734 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.07029 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X172.089 Y125.690 E0.07029 ; perimeter
G1 X172.433 Y126.100 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.07029 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
M73 P84 R21
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X165.117 Y116.765 E0.07029 ; perimeter
G1 X165.971 Y117.782 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.07029 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X172.138 Y125.132 E0.07029 ; perimeter
G1 X172.992 Y126.149 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.07029 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y139.253 E0.04011 ; perimeter
G1 X169.775 Y139.253 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.04011 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.462 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.857 E0.06321 ; perimeter
G1 X170.171 Y138.857 E0.21040 ; perimeter
G1 X170.171 Y140.391 E0.06321 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.522 Y140.789 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.298 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y138.460 E0.08630 ; perimeter
G1 X170.567 Y138.460 E0.24306 ; perimeter
G1 X170.567 Y140.555 E0.08630 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.358 Y141.185 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.282 Y140.786 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.667 Y140.555 E-0.21581 ; wipe and retract
G1 X164.667 Y138.460 E-0.48370 ; wipe and retract
G1 X164.929 Y138.460 E-0.06050 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X165.997 Y140.278 ; move to first infill point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.6
G1 X165.776 Y140.057 E0.01632 ; infill
G1 X165.776 Y139.569 E0.02544 ; infill
G1 X165.999 Y139.569 E0.01163 ; infill
G1 X166.506 Y140.077 E0.03747 ; infill
G1 X167.217 Y140.077 E0.03707 ; infill
G1 X166.709 Y139.569 E0.03747 ; infill
G1 X167.419 Y139.569 E0.03707 ; infill
G1 X167.927 Y140.077 E0.03747 ; infill
G1 X168.637 Y140.077 E0.03707 ; infill
G1 X168.129 Y139.569 E0.03747 ; infill
G1 X168.840 Y139.569 E0.03707 ; infill
G1 X169.548 Y140.278 E0.05230 ; infill
G1 F8640
G1 X168.840 Y139.569 E-0.23134 ; wipe and retract
G1 X168.129 Y139.569 E-0.16399 ; wipe and retract
G1 X168.637 Y140.077 E-0.16575 ; wipe and retract
G1 X167.927 Y140.077 E-0.16399 ; wipe and retract
G1 X167.820 Y139.970 E-0.03493 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X172.621 Y138.211 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X172.276 Y137.801 E0.02205 ; perimeter
G1 X201.326 Y113.426 E1.56222 ; perimeter
G1 X201.646 Y113.116 E0.01834 ; perimeter
G1 X201.930 Y112.747 E0.01917 ; perimeter
G1 X202.155 Y112.344 E0.01903 ; perimeter
G1 X202.315 Y111.906 E0.01922 ; perimeter
G1 X202.397 Y111.392 E0.02142 ; perimeter
G1 X202.400 Y111.021 E0.01528 ; perimeter
G1 X202.320 Y110.583 E0.01834 ; perimeter
G1 X202.155 Y110.172 E0.01826 ; perimeter
G1 X201.927 Y109.833 E0.01685 ; perimeter
G1 X201.162 Y108.921 E0.04901 ; perimeter
G1 X201.670 Y108.495 E0.02729 ; perimeter
G1 X202.503 Y109.489 E0.05343 ; perimeter
G1 X202.771 Y109.855 E0.01868 ; perimeter
G1 X202.920 Y110.157 E0.01387 ; perimeter
G1 X203.025 Y110.494 E0.01454 ; perimeter
G1 X203.075 Y110.812 E0.01327 ; perimeter
G1 X203.082 Y111.239 E0.01761 ; perimeter
G1 X203.031 Y111.637 E0.01654 ; perimeter
G1 X202.943 Y111.981 E0.01460 ; perimeter
G1 X202.792 Y112.378 E0.01750 ; perimeter
G1 X202.536 Y112.848 E0.02206 ; perimeter
G1 X202.331 Y113.147 E0.01494 ; perimeter
G1 X202.029 Y113.500 E0.01913 ; perimeter
G1 X201.675 Y113.832 E0.02001 ; perimeter
G1 X172.667 Y138.173 E1.55997 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.572 Y138.770 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.718 Y137.752 E0.05471 ; perimeter
G1 X201.061 Y113.131 E1.57796 ; perimeter
G1 X201.349 Y112.851 E0.01657 ; perimeter
G1 X201.598 Y112.529 E0.01678 ; perimeter
G1 X201.793 Y112.178 E0.01654 ; perimeter
G1 X201.930 Y111.805 E0.01635 ; perimeter
G1 X202.001 Y111.359 E0.01862 ; perimeter
G1 X202.004 Y111.055 E0.01251 ; perimeter
G1 X201.938 Y110.694 E0.01513 ; perimeter
G1 X201.803 Y110.359 E0.01489 ; perimeter
G1 X201.610 Y110.071 E0.01426 ; perimeter
G1 X200.604 Y108.872 E0.06447 ; perimeter
G1 X201.719 Y107.937 E0.05995 ; perimeter
G1 X202.816 Y109.244 E0.07030 ; perimeter
G1 X203.111 Y109.649 E0.02064 ; perimeter
G1 X203.289 Y110.009 E0.01657 ; perimeter
G1 X203.412 Y110.403 E0.01701 ; perimeter
G1 X203.471 Y110.777 E0.01560 ; perimeter
G1 X203.479 Y111.262 E0.01995 ; perimeter
G1 X203.421 Y111.712 E0.01872 ; perimeter
G1 X203.322 Y112.101 E0.01652 ; perimeter
G1 X203.152 Y112.544 E0.01953 ; perimeter
G1 X202.875 Y113.056 E0.02399 ; perimeter
G1 X202.646 Y113.389 E0.01666 ; perimeter
G1 X202.316 Y113.774 E0.02090 ; perimeter
G1 X201.938 Y114.129 E0.02135 ; perimeter
G1 X172.618 Y138.731 E1.57675 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.502 Y138.376 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.718 Y137.752 E-0.30695 ; wipe and retract
G1 X173.221 Y136.491 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X195.248 Y106.956 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X194.904 Y106.546 E0.02205 ; perimeter
G1 X197.407 Y104.446 E0.13459 ; perimeter
M73 Q84 S22
G1 X193.996 Y100.381 E0.21861 ; perimeter
G1 X191.493 Y102.481 E0.13459 ; perimeter
G1 X191.149 Y102.071 E0.02205 ; perimeter
G1 X193.652 Y99.971 E0.13459 ; perimeter
G1 X191.203 Y97.052 E0.15696 ; perimeter
G1 X191.710 Y96.626 E0.02729 ; perimeter
G1 X200.708 Y107.349 E0.57663 ; perimeter
G1 X200.200 Y107.775 E0.02729 ; perimeter
G1 X197.751 Y104.856 E0.15696 ; perimeter
G1 X195.294 Y106.918 E0.13212 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.199 Y107.515 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X194.346 Y106.497 E0.05471 ; perimeter
G1 X196.849 Y104.397 E0.13459 ; perimeter
G1 X193.947 Y100.939 E0.18596 ; perimeter
G1 X191.444 Y103.039 E0.13459 ; perimeter
G1 X190.591 Y102.022 E0.05471 ; perimeter
G1 X193.093 Y99.922 E0.13459 ; perimeter
G1 X190.644 Y97.003 E0.15696 ; perimeter
G1 X191.759 Y96.068 E0.05995 ; perimeter
G1 X201.266 Y107.398 E0.60929 ; perimeter
G1 X200.151 Y108.333 E0.05995 ; perimeter
G1 X197.702 Y105.414 E0.15696 ; perimeter
G1 X195.245 Y107.476 E0.13212 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.244 Y107.117 F10800.000 ; move inwards before travel
G1 F8640
G1 X194.346 Y106.497 E-0.30695 ; wipe and retract
G1 X195.849 Y105.236 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
G1 X159.695 Y114.905 ; move to first perimeter point
G1 Z18.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.351 Y114.495 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.17707 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X186.636 Y95.910 E1.01399 ; perimeter
G1 X187.026 Y95.618 E0.02004 ; perimeter
G1 X187.334 Y95.435 E0.01479 ; perimeter
G1 X187.842 Y95.196 E0.02314 ; perimeter
G1 X188.258 Y95.064 E0.01797 ; perimeter
G1 X188.677 Y94.983 E0.01759 ; perimeter
G1 X189.090 Y94.955 E0.01703 ; perimeter
G1 X189.432 Y94.973 E0.01411 ; perimeter
G1 X189.854 Y95.055 E0.01772 ; perimeter
G1 X190.159 Y95.160 E0.01327 ; perimeter
G1 X190.472 Y95.322 E0.01454 ; perimeter
G1 X190.720 Y95.503 E0.01266 ; perimeter
G1 X190.162 Y95.972 E0.03001 ; perimeter
G1 X189.948 Y95.839 E0.01038 ; perimeter
G1 X189.531 Y95.684 E0.01834 ; perimeter
G1 X189.088 Y95.610 E0.01847 ; perimeter
G1 X188.636 Y95.615 E0.01864 ; perimeter
G1 X188.186 Y95.696 E0.01884 ; perimeter
G1 X187.749 Y95.847 E0.01903 ; perimeter
G1 X187.337 Y96.063 E0.01915 ; perimeter
G1 X186.997 Y96.308 E0.01731 ; perimeter
G1 X167.976 Y112.267 E1.02284 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.741 Y114.866 E0.16657 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.647 Y115.463 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X158.793 Y114.446 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.19934 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X186.390 Y95.600 E1.00849 ; perimeter
G1 X186.805 Y95.288 E0.02136 ; perimeter
G1 X187.148 Y95.084 E0.01645 ; perimeter
G1 X187.697 Y94.826 E0.02500 ; perimeter
G1 X188.160 Y94.679 E0.02001 ; perimeter
G1 X188.626 Y94.589 E0.01956 ; perimeter
G1 X189.087 Y94.558 E0.01902 ; perimeter
G1 X189.480 Y94.579 E0.01622 ; perimeter
G1 X189.957 Y94.671 E0.01999 ; perimeter
G1 X190.315 Y94.794 E0.01560 ; perimeter
G1 X190.682 Y94.984 E0.01701 ; perimeter
G1 X191.007 Y95.223 E0.01663 ; perimeter
G1 X191.307 Y95.529 E0.01764 ; perimeter
G1 X190.174 Y96.479 E0.06089 ; perimeter
G1 X190.079 Y96.387 E0.00544 ; perimeter
G1 X189.773 Y96.196 E0.01489 ; perimeter
G1 X189.428 Y96.068 E0.01513 ; perimeter
G1 X189.058 Y96.007 E0.01546 ; perimeter
G1 X188.673 Y96.011 E0.01584 ; perimeter
G1 X188.286 Y96.081 E0.01621 ; perimeter
G1 X187.907 Y96.212 E0.01654 ; perimeter
G1 X187.546 Y96.401 E0.01677 ; perimeter
G1 X187.240 Y96.621 E0.01554 ; perimeter
G1 X168.120 Y112.663 E1.02818 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X159.693 Y115.424 E0.17696 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.627 Y115.063 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;19


G1 F8640
G1 X158.793 Y114.446 E-0.30695 ; wipe and retract
G1 X160.296 Y113.185 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;19
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y101.107 E0.04011 ; perimeter
G1 X84.255 Y101.107 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.04011 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.253 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.711 E0.06321 ; perimeter
G1 X84.651 Y100.711 E0.21040 ; perimeter
G1 X84.651 Y102.245 E0.06321 ; perimeter
G1 X84.296 Y102.600 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.417 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y100.314 E0.08630 ; perimeter
G1 X85.047 Y100.314 E0.24305 ; perimeter
G1 X85.047 Y102.409 E0.08630 ; perimeter
G1 X84.460 Y102.997 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.087 Y102.814 F10800.000 ; move inwards before travel
G1 F8640
G1 X81.168 Y103.027 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X83.718 Y102.131 ; move to first infill point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.6
G1 X83.939 Y101.910 E0.01632 ; infill
G1 X83.939 Y101.423 E0.02544 ; infill
G1 X83.716 Y101.423 E0.01163 ; infill
G1 X83.208 Y101.931 E0.03747 ; infill
G1 X82.498 Y101.931 E0.03707 ; infill
G1 X83.006 Y101.423 E0.03747 ; infill
G1 X82.295 Y101.423 E0.03707 ; infill
G1 X81.788 Y101.931 E0.03747 ; infill
G1 X81.078 Y101.931 E0.03707 ; infill
G1 X81.585 Y101.423 E0.03747 ; infill
G1 X80.875 Y101.423 E0.03707 ; infill
G1 X80.167 Y102.131 E0.05230 ; infill
G1 F8640
G1 X80.875 Y101.423 E-0.23134 ; wipe and retract
G1 X81.585 Y101.423 E-0.16399 ; wipe and retract
G1 X81.078 Y101.931 E-0.16576 ; wipe and retract
G1 X81.788 Y101.931 E-0.16399 ; wipe and retract
G1 X81.895 Y101.824 E-0.03492 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X77.344 Y88.006 E0.06694 ; perimeter
G1 X77.688 Y87.596 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.06694 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X84.364 Y79.640 E0.06694 ; perimeter
G1 X84.708 Y79.230 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.06694 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X76.785 Y88.055 E0.06694 ; perimeter
G1 X77.639 Y87.038 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.06694 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X83.806 Y79.688 E0.06694 ; perimeter
G1 X84.660 Y78.671 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.06694 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X98.987 Y76.219 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y75.969 E0.04806 ; perimeter
G1 X97.847 Y75.459 E0.02101 ; perimeter
G1 X98.987 Y75.699 E0.04798 ; perimeter
G1 X98.987 Y76.159 E0.01894 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y76.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.451 Y76.288 E0.08142 ; perimeter
G1 X97.451 Y74.959 E0.05475 ; perimeter
G1 X99.383 Y75.376 E0.08144 ; perimeter
G1 X99.383 Y76.643 E0.05217 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y77.183 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.988 Y77.030 E0.03321 ; perimeter
G1 X97.055 Y76.607 E0.08153 ; perimeter
G1 X97.055 Y74.458 E0.08850 ; perimeter
G1 X98.137 Y74.713 E0.04581 ; perimeter
G1 X99.780 Y75.054 E0.06910 ; perimeter
G1 X99.780 Y77.123 E0.08523 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.420 Y77.007 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.988 Y77.030 E-0.18405 ; wipe and retract
G1 X97.055 Y76.607 E-0.45698 ; wipe and retract
G1 X97.055 Y76.091 E-0.11896 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X89.828 Y76.598 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.15875 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X62.605 Y58.065 E1.02900 ; perimeter
G1 X62.244 Y57.804 E0.01834 ; perimeter
G1 X61.832 Y57.588 E0.01917 ; perimeter
G1 X61.395 Y57.437 E0.01903 ; perimeter
G1 X60.945 Y57.357 E0.01884 ; perimeter
G1 X60.485 Y57.351 E0.01893 ; perimeter
G1 X60.003 Y57.443 E0.02024 ; perimeter
G1 X59.633 Y57.580 E0.01625 ; perimeter
G1 X59.419 Y57.713 E0.01039 ; perimeter
G1 X58.861 Y57.245 E0.03000 ; perimeter
G1 X59.107 Y57.064 E0.01258 ; perimeter
G1 X59.418 Y56.903 E0.01443 ; perimeter
G1 X59.764 Y56.785 E0.01507 ; perimeter
G1 X60.105 Y56.720 E0.01427 ; perimeter
G1 X60.542 Y56.697 E0.01802 ; perimeter
G1 X60.908 Y56.724 E0.01513 ; perimeter
G1 X61.328 Y56.806 E0.01762 ; perimeter
G1 X61.743 Y56.939 E0.01796 ; perimeter
G1 X62.233 Y57.168 E0.02227 ; perimeter
G1 X62.556 Y57.361 E0.01552 ; perimeter
G1 X62.944 Y57.651 E0.01998 ; perimeter
G1 X81.934 Y73.586 E1.02120 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.172 Y76.188 E0.16677 ; perimeter
G1 X89.866 Y76.552 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.877 Y77.156 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.16913 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X62.361 Y58.378 E1.03435 ; perimeter
G1 X62.035 Y58.142 E0.01657 ; perimeter
G1 X61.674 Y57.953 E0.01678 ; perimeter
G1 X61.295 Y57.822 E0.01654 ; perimeter
G1 X60.907 Y57.753 E0.01621 ; perimeter
G1 X60.520 Y57.748 E0.01594 ; perimeter
G1 X60.109 Y57.826 E0.01724 ; perimeter
G1 X59.808 Y57.938 E0.01323 ; perimeter
G1 X59.501 Y58.128 E0.01489 ; perimeter
G1 X59.406 Y58.220 E0.00544 ; perimeter
G1 X58.274 Y57.270 E0.06089 ; perimeter
G1 X58.573 Y56.965 E0.01759 ; perimeter
G1 X58.897 Y56.726 E0.01658 ; perimeter
G1 X59.262 Y56.537 E0.01693 ; perimeter
G1 X59.663 Y56.401 E0.01744 ; perimeter
G1 X60.057 Y56.326 E0.01651 ; perimeter
G1 X60.546 Y56.300 E0.02018 ; perimeter
G1 X60.961 Y56.331 E0.01713 ; perimeter
G1 X61.426 Y56.421 E0.01954 ; perimeter
G1 X61.888 Y56.569 E0.01997 ; perimeter
G1 X62.418 Y56.817 E0.02413 ; perimeter
G1 X62.777 Y57.031 E0.01720 ; perimeter
G1 X63.191 Y57.341 E0.02130 ; perimeter
G1 X82.078 Y73.189 E1.01570 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X90.730 Y76.139 E0.18904 ; perimeter
G1 X89.915 Y77.110 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.596 Y76.871 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.363 Y75.032 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X54.327 Y68.693 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X51.830 Y66.597 E0.13432 ; perimeter
G1 X49.381 Y69.516 E0.15696 ; perimeter
G1 X48.873 Y69.090 E0.02729 ; perimeter
G1 X57.870 Y58.368 E0.57663 ; perimeter
G1 X58.378 Y58.793 E0.02729 ; perimeter
G1 X55.929 Y61.712 E0.15696 ; perimeter
G1 X58.427 Y63.808 E0.13432 ; perimeter
G1 X58.083 Y64.218 E0.02205 ; perimeter
G1 X55.585 Y62.122 E0.13432 ; perimeter
G1 X52.174 Y66.187 E0.21861 ; perimeter
G1 X54.671 Y68.283 E0.13432 ; perimeter
G1 X54.366 Y68.647 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.376 Y69.252 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X51.878 Y67.156 E0.13432 ; perimeter
G1 X49.429 Y70.074 E0.15696 ; perimeter
G1 X48.315 Y69.139 E0.05995 ; perimeter
G1 X57.821 Y57.809 E0.60929 ; perimeter
G1 X58.936 Y58.745 E0.05995 ; perimeter
G1 X56.487 Y61.663 E0.15696 ; perimeter
G1 X58.985 Y63.759 E0.13432 ; perimeter
G1 X58.131 Y64.776 E0.05471 ; perimeter
G1 X55.634 Y62.681 E0.13432 ; perimeter
G1 X52.732 Y66.138 E0.18596 ; perimeter
G1 X55.230 Y68.234 E0.13432 ; perimeter
G1 X54.415 Y69.206 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.105 Y68.957 F10800.000 ; move inwards before travel
G1 F8640
G1 X51.878 Y67.156 E-0.75301 ; wipe and retract
G1 X51.859 Y67.179 E-0.00699 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X76.903 Y99.904 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.906 Y75.573 E1.55936 ; perimeter
G1 X47.553 Y75.242 E0.01995 ; perimeter
G1 X47.252 Y74.892 E0.01901 ; perimeter
G1 X46.998 Y74.518 E0.01864 ; perimeter
G1 X46.793 Y74.128 E0.01815 ; perimeter
G1 X46.639 Y73.729 E0.01762 ; perimeter
G1 X46.548 Y73.371 E0.01520 ; perimeter
G1 X46.497 Y72.972 E0.01656 ; perimeter
G1 X46.501 Y72.591 E0.01571 ; perimeter
G1 X46.557 Y72.231 E0.01502 ; perimeter
G1 X46.661 Y71.896 E0.01443 ; perimeter
G1 X46.812 Y71.591 E0.01401 ; perimeter
G1 X47.020 Y71.298 E0.01482 ; perimeter
G1 X47.911 Y70.237 E0.05709 ; perimeter
G1 X48.419 Y70.663 E0.02729 ; perimeter
G1 X47.654 Y71.574 E0.04901 ; perimeter
G1 X47.426 Y71.913 E0.01685 ; perimeter
G1 X47.260 Y72.325 E0.01826 ; perimeter
G1 X47.181 Y72.762 E0.01834 ; perimeter
G1 X47.185 Y73.211 E0.01847 ; perimeter
G1 X47.268 Y73.656 E0.01864 ; perimeter
G1 X47.426 Y74.085 E0.01884 ; perimeter
G1 X47.651 Y74.488 E0.01903 ; perimeter
G1 X47.935 Y74.857 E0.01917 ; perimeter
G1 X48.254 Y75.167 E0.01834 ; perimeter
G1 X77.247 Y99.494 E1.55913 ; perimeter
G1 X76.941 Y99.858 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.952 Y100.463 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X47.643 Y75.870 E1.57613 ; perimeter
G1 X47.266 Y75.517 E0.02129 ; perimeter
G1 X46.937 Y75.133 E0.02081 ; perimeter
G1 X46.657 Y74.722 E0.02048 ; perimeter
G1 X46.431 Y74.292 E0.02004 ; perimeter
G1 X46.261 Y73.849 E0.01954 ; perimeter
G1 X46.158 Y73.445 E0.01716 ; perimeter
G1 X46.101 Y72.996 E0.01868 ; perimeter
G1 X46.105 Y72.559 E0.01800 ; perimeter
G1 X46.169 Y72.141 E0.01742 ; perimeter
G1 X46.292 Y71.748 E0.01693 ; perimeter
G1 X46.471 Y71.387 E0.01658 ; perimeter
G1 X46.706 Y71.056 E0.01677 ; perimeter
G1 X47.862 Y69.678 E0.07407 ; perimeter
G1 X48.977 Y70.614 E0.05995 ; perimeter
G1 X47.971 Y71.813 E0.06447 ; perimeter
G1 X47.778 Y72.100 E0.01426 ; perimeter
G1 X47.643 Y72.435 E0.01489 ; perimeter
G1 X47.577 Y72.797 E0.01513 ; perimeter
G1 X47.581 Y73.172 E0.01546 ; perimeter
G1 X47.652 Y73.550 E0.01584 ; perimeter
G1 X47.787 Y73.919 E0.01621 ; perimeter
G1 X47.983 Y74.270 E0.01654 ; perimeter
G1 X48.231 Y74.592 E0.01678 ; perimeter
G1 X48.520 Y74.872 E0.01657 ; perimeter
G1 X77.805 Y99.445 E1.57487 ; perimeter
G1 X76.990 Y100.417 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.648 Y100.202 F10800.000 ; move inwards before travel
G1 F8640
G1 X74.465 Y98.305 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X151.013 Y76.219 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y75.699 E0.02141 ; perimeter
G1 X152.153 Y75.459 E0.04798 ; perimeter
G1 X152.153 Y75.969 E0.02101 ; perimeter
G1 X151.072 Y76.206 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y76.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.617 Y75.376 E0.05464 ; perimeter
G1 X152.549 Y74.959 E0.08144 ; perimeter
G1 X152.549 Y76.288 E0.05476 ; perimeter
G1 X150.676 Y76.691 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y77.183 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.220 Y75.054 E0.08770 ; perimeter
G1 X151.863 Y74.713 E0.06910 ; perimeter
G1 X152.945 Y74.458 E0.04581 ; perimeter
G1 X152.945 Y76.607 E0.08850 ; perimeter
G1 X151.012 Y77.030 E0.08153 ; perimeter
G1 X150.279 Y77.171 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.396 Y76.823 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.220 Y75.054 E-0.48911 ; wipe and retract
G1 X151.369 Y74.815 E-0.27089 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X165.292 Y79.230 E0.06694 ; perimeter
G1 X165.636 Y79.640 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.06694 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X172.312 Y87.596 E0.06694 ; perimeter
G1 X172.656 Y88.006 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.06694 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X165.340 Y78.671 E0.06694 ; perimeter
G1 X166.194 Y79.688 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.06694 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X172.361 Y87.038 E0.06694 ; perimeter
G1 X173.215 Y88.055 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.06694 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y101.107 E0.04011 ; perimeter
G1 X170.060 Y101.107 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.04011 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.747 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.711 E0.06321 ; perimeter
G1 X170.456 Y100.711 E0.21040 ; perimeter
G1 X170.456 Y102.245 E0.06321 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.807 Y102.643 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.583 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y100.314 E0.08630 ; perimeter
G1 X170.853 Y100.314 E0.24306 ; perimeter
G1 X170.853 Y102.409 E0.08630 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.643 Y103.039 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.567 Y102.640 F10800.000 ; move inwards before travel
G1 X165.972 Y102.131 ; move to first infill point
G1 F7168.6
G1 X166.680 Y101.423 E0.05230 ; infill
G1 X167.390 Y101.423 E0.03707 ; infill
G1 X166.883 Y101.931 E0.03747 ; infill
G1 X167.593 Y101.931 E0.03707 ; infill
G1 X168.101 Y101.423 E0.03747 ; infill
G1 X168.811 Y101.423 E0.03707 ; infill
G1 X168.303 Y101.931 E0.03747 ; infill
G1 X169.013 Y101.931 E0.03707 ; infill
G1 X169.521 Y101.423 E0.03747 ; infill
G1 X169.744 Y101.423 E0.01163 ; infill
G1 X169.744 Y101.910 E0.02544 ; infill
G1 X169.523 Y102.131 E0.01633 ; infill
G1 F8640
G1 X169.744 Y101.910 E-0.07222 ; wipe and retract
G1 X169.744 Y101.423 E-0.11252 ; wipe and retract
G1 X169.521 Y101.423 E-0.05147 ; wipe and retract
G1 X169.013 Y101.931 E-0.16576 ; wipe and retract
G1 X168.303 Y101.931 E-0.16399 ; wipe and retract
G1 X168.811 Y101.423 E-0.16576 ; wipe and retract
G1 X168.688 Y101.423 E-0.02830 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X173.097 Y99.904 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X172.753 Y99.494 E0.02205 ; perimeter
G1 X201.746 Y75.167 E1.55913 ; perimeter
G1 X202.065 Y74.857 E0.01834 ; perimeter
G1 X202.349 Y74.488 E0.01917 ; perimeter
G1 X202.574 Y74.085 E0.01903 ; perimeter
G1 X202.734 Y73.649 E0.01913 ; perimeter
G1 X202.816 Y73.154 E0.02066 ; perimeter
G1 X202.819 Y72.762 E0.01614 ; perimeter
G1 X202.740 Y72.325 E0.01834 ; perimeter
G1 X202.574 Y71.913 E0.01826 ; perimeter
G1 X202.346 Y71.574 E0.01685 ; perimeter
G1 X201.581 Y70.663 E0.04901 ; perimeter
G1 X202.089 Y70.237 E0.02729 ; perimeter
G1 X202.947 Y71.259 E0.05496 ; perimeter
G1 X203.189 Y71.594 E0.01705 ; perimeter
G1 X203.339 Y71.896 E0.01390 ; perimeter
G1 X203.444 Y72.232 E0.01447 ; perimeter
G1 X203.496 Y72.563 E0.01383 ; perimeter
G1 X203.502 Y72.974 E0.01693 ; perimeter
G1 X203.452 Y73.371 E0.01648 ; perimeter
G1 X203.361 Y73.729 E0.01520 ; perimeter
G1 X203.209 Y74.125 E0.01747 ; perimeter
G1 X202.963 Y74.578 E0.02124 ; perimeter
G1 X202.748 Y74.891 E0.01565 ; perimeter
G1 X202.447 Y75.242 E0.01906 ; perimeter
G1 X202.094 Y75.573 E0.01995 ; perimeter
G1 X173.143 Y99.866 E1.55689 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.048 Y100.463 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X172.195 Y99.445 E0.05471 ; perimeter
G1 X201.480 Y74.872 E1.57487 ; perimeter
G1 X201.769 Y74.592 E0.01657 ; perimeter
G1 X202.017 Y74.270 E0.01678 ; perimeter
G1 X202.213 Y73.919 E0.01654 ; perimeter
G1 X202.349 Y73.547 E0.01632 ; perimeter
G1 X202.420 Y73.120 E0.01785 ; perimeter
G1 X202.423 Y72.797 E0.01332 ; perimeter
G1 X202.357 Y72.435 E0.01513 ; perimeter
G1 X202.222 Y72.100 E0.01489 ; perimeter
G1 X202.029 Y71.813 E0.01426 ; perimeter
G1 X201.023 Y70.614 E0.06447 ; perimeter
G1 X202.138 Y69.678 E0.05995 ; perimeter
G1 X203.259 Y71.015 E0.07187 ; perimeter
G1 X203.530 Y71.388 E0.01900 ; perimeter
G1 X203.708 Y71.748 E0.01654 ; perimeter
G1 X203.831 Y72.141 E0.01695 ; perimeter
G1 X203.892 Y72.529 E0.01618 ; perimeter
G1 X203.899 Y72.996 E0.01925 ; perimeter
G1 X203.842 Y73.445 E0.01865 ; perimeter
G1 X203.739 Y73.849 E0.01716 ; perimeter
G1 X203.569 Y74.291 E0.01948 ; perimeter
G1 X203.302 Y74.785 E0.02315 ; perimeter
G1 X203.063 Y75.133 E0.01738 ; perimeter
G1 X202.734 Y75.517 E0.02083 ; perimeter
G1 X202.357 Y75.870 E0.02129 ; perimeter
G1 X173.094 Y100.424 E1.57366 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.979 Y100.069 F10800.000 ; move inwards before travel
G1 F8640
G1 X172.195 Y99.445 E-0.30695 ; wipe and retract
G1 X173.698 Y98.184 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X195.673 Y68.693 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X195.329 Y68.283 E0.02205 ; perimeter
G1 X197.826 Y66.187 E0.13432 ; perimeter
G1 X194.415 Y62.122 E0.21861 ; perimeter
G1 X191.917 Y64.218 E0.13432 ; perimeter
G1 X191.573 Y63.808 E0.02205 ; perimeter
G1 X194.071 Y61.712 E0.13432 ; perimeter
G1 X191.622 Y58.793 E0.15696 ; perimeter
G1 X192.130 Y58.368 E0.02730 ; perimeter
G1 X201.127 Y69.090 E0.57663 ; perimeter
G1 X200.619 Y69.516 E0.02730 ; perimeter
G1 X198.170 Y66.597 E0.15696 ; perimeter
G1 X195.719 Y68.655 E0.13185 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.624 Y69.252 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X194.770 Y68.234 E0.05471 ; perimeter
G1 X197.268 Y66.138 E0.13432 ; perimeter
G1 X194.366 Y62.681 E0.18596 ; perimeter
G1 X191.869 Y64.776 E0.13432 ; perimeter
G1 X191.015 Y63.759 E0.05471 ; perimeter
G1 X193.513 Y61.663 E0.13432 ; perimeter
G1 X191.064 Y58.745 E0.15696 ; perimeter
G1 X192.179 Y57.809 E0.05995 ; perimeter
G1 X201.685 Y69.139 E0.60929 ; perimeter
G1 X200.571 Y70.074 E0.05995 ; perimeter
G1 X198.122 Y67.156 E0.15696 ; perimeter
G1 X195.670 Y69.213 E0.13185 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.669 Y68.854 F10800.000 ; move inwards before travel
G1 F8640
G1 X194.770 Y68.234 E-0.30695 ; wipe and retract
G1 X196.273 Y66.973 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X160.172 Y76.598 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.828 Y76.188 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.16677 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X187.056 Y57.651 E1.02120 ; perimeter
G1 X187.444 Y57.361 E0.01998 ; perimeter
G1 X187.767 Y57.168 E0.01552 ; perimeter
G1 X188.257 Y56.939 E0.02228 ; perimeter
G1 X188.672 Y56.806 E0.01796 ; perimeter
G1 X189.091 Y56.725 E0.01755 ; perimeter
G1 X189.501 Y56.696 E0.01696 ; perimeter
G1 X189.858 Y56.715 E0.01472 ; perimeter
G1 X190.264 Y56.794 E0.01701 ; perimeter
G1 X190.581 Y56.903 E0.01383 ; perimeter
G1 X190.893 Y57.064 E0.01447 ; perimeter
G1 X191.139 Y57.245 E0.01258 ; perimeter
G1 X190.581 Y57.713 E0.03000 ; perimeter
G1 X190.367 Y57.580 E0.01038 ; perimeter
G1 X189.950 Y57.425 E0.01834 ; perimeter
G1 X189.508 Y57.351 E0.01847 ; perimeter
G1 X189.055 Y57.357 E0.01864 ; perimeter
G1 X188.605 Y57.437 E0.01884 ; perimeter
G1 X188.168 Y57.588 E0.01903 ; perimeter
G1 X187.757 Y57.804 E0.01915 ; perimeter
G1 X187.412 Y58.052 E0.01750 ; perimeter
G1 X168.261 Y74.121 E1.02985 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X160.218 Y76.559 E0.15627 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.123 Y77.156 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.270 Y76.139 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.18904 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X186.809 Y57.341 E1.01570 ; perimeter
G1 X187.223 Y57.031 E0.02130 ; perimeter
G1 X187.582 Y56.817 E0.01720 ; perimeter
G1 X188.112 Y56.569 E0.02413 ; perimeter
G1 X188.574 Y56.421 E0.01997 ; perimeter
G1 X189.039 Y56.331 E0.01951 ; perimeter
G1 X189.498 Y56.299 E0.01897 ; perimeter
G1 X189.906 Y56.321 E0.01685 ; perimeter
G1 X190.366 Y56.410 E0.01928 ; perimeter
G1 X190.737 Y56.537 E0.01618 ; perimeter
G1 X191.103 Y56.726 E0.01695 ; perimeter
G1 X191.427 Y56.965 E0.01658 ; perimeter
G1 X191.726 Y57.270 E0.01759 ; perimeter
G1 X190.594 Y58.220 E0.06089 ; perimeter
G1 X190.499 Y58.128 E0.00544 ; perimeter
G1 X190.192 Y57.938 E0.01489 ; perimeter
G1 X189.847 Y57.810 E0.01513 ; perimeter
G1 X189.477 Y57.748 E0.01546 ; perimeter
G1 X189.093 Y57.753 E0.01584 ; perimeter
G1 X188.705 Y57.822 E0.01621 ; perimeter
G1 X188.326 Y57.953 E0.01654 ; perimeter
G1 X187.965 Y58.142 E0.01677 ; perimeter
G1 X187.656 Y58.365 E0.01573 ; perimeter
G1 X168.405 Y74.517 E1.03520 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X160.169 Y77.118 E0.16666 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.105 Y76.757 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.270 Y76.139 E-0.30695 ; wipe and retract
G1 X160.773 Y74.878 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y139.253 E0.04011 ; perimeter
G1 X83.970 Y139.253 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.04011 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.968 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.857 E0.06321 ; perimeter
G1 X84.366 Y138.857 E0.21040 ; perimeter
G1 X84.366 Y140.391 E0.06321 ; perimeter
G1 X84.010 Y140.747 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.132 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y138.460 E0.08630 ; perimeter
G1 X84.762 Y138.460 E0.24305 ; perimeter
G1 X84.762 Y140.555 E0.08630 ; perimeter
G1 X84.175 Y141.143 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.802 Y140.960 F10800.000 ; move inwards before travel
G1 F8640
G1 X80.883 Y141.173 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X83.432 Y140.278 ; move to first infill point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.6
G1 X83.654 Y140.056 E0.01632 ; infill
G1 X83.654 Y139.569 E0.02544 ; infill
G1 X83.431 Y139.569 E0.01163 ; infill
G1 X82.923 Y140.077 E0.03747 ; infill
G1 X82.213 Y140.077 E0.03707 ; infill
G1 X82.720 Y139.569 E0.03747 ; infill
G1 X82.010 Y139.569 E0.03707 ; infill
G1 X81.503 Y140.077 E0.03747 ; infill
G1 X80.792 Y140.077 E0.03707 ; infill
G1 X81.300 Y139.569 E0.03747 ; infill
G1 X80.590 Y139.569 E0.03707 ; infill
G1 X79.881 Y140.278 E0.05230 ; infill
G1 F8640
G1 X80.590 Y139.569 E-0.23134 ; wipe and retract
G1 X81.300 Y139.569 E-0.16399 ; wipe and retract
G1 X80.792 Y140.077 E-0.16576 ; wipe and retract
G1 X81.503 Y140.077 E-0.16399 ; wipe and retract
G1 X81.610 Y139.970 E-0.03492 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X77.059 Y126.152 E0.06694 ; perimeter
G1 X77.403 Y125.742 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.06694 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X84.079 Y117.786 E0.06694 ; perimeter
G1 X84.423 Y117.376 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.06694 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X76.500 Y126.201 E0.06694 ; perimeter
G1 X77.354 Y125.184 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.06694 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X83.521 Y117.835 E0.06694 ; perimeter
G1 X84.374 Y116.817 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.06694 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X98.702 Y114.365 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y114.115 E0.04806 ; perimeter
G1 X97.562 Y113.605 E0.02101 ; perimeter
G1 X98.702 Y113.845 E0.04798 ; perimeter
G1 X98.702 Y114.305 E0.01894 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y114.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.166 Y114.434 E0.08142 ; perimeter
G1 X97.166 Y113.105 E0.05475 ; perimeter
G1 X99.098 Y113.522 E0.08144 ; perimeter
G1 X99.098 Y114.789 E0.05217 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y115.329 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.703 Y115.176 E0.03321 ; perimeter
G1 X96.769 Y114.753 E0.08153 ; perimeter
G1 X96.769 Y112.605 E0.08850 ; perimeter
M73 P85 R20
G1 X97.852 Y112.859 E0.04581 ; perimeter
G1 X99.494 Y113.200 E0.06910 ; perimeter
G1 X99.494 Y115.269 E0.08523 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.135 Y115.153 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.703 Y115.176 E-0.18405 ; wipe and retract
G1 X96.769 Y114.753 E-0.45698 ; wipe and retract
G1 X96.769 Y114.238 E-0.11896 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X89.543 Y114.744 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.15875 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X62.319 Y96.211 E1.02900 ; perimeter
G1 X61.959 Y95.950 E0.01834 ; perimeter
G1 X61.546 Y95.735 E0.01917 ; perimeter
G1 X61.110 Y95.583 E0.01903 ; perimeter
G1 X60.660 Y95.503 E0.01884 ; perimeter
G1 X60.200 Y95.497 E0.01893 ; perimeter
G1 X59.717 Y95.589 E0.02024 ; perimeter
G1 X59.348 Y95.726 E0.01625 ; perimeter
G1 X59.134 Y95.859 E0.01039 ; perimeter
G1 X58.576 Y95.391 E0.03000 ; perimeter
G1 X58.822 Y95.210 E0.01258 ; perimeter
G1 X59.133 Y95.049 E0.01443 ; perimeter
G1 X59.479 Y94.931 E0.01507 ; perimeter
G1 X59.819 Y94.866 E0.01427 ; perimeter
G1 X60.256 Y94.843 E0.01802 ; perimeter
G1 X60.623 Y94.871 E0.01513 ; perimeter
G1 X61.042 Y94.952 E0.01762 ; perimeter
G1 X61.458 Y95.085 E0.01796 ; perimeter
G1 X61.947 Y95.314 E0.02227 ; perimeter
G1 X62.271 Y95.507 E0.01552 ; perimeter
G1 X62.659 Y95.798 E0.01998 ; perimeter
G1 X81.649 Y111.732 E1.02120 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X89.887 Y114.334 E0.16677 ; perimeter
G1 X89.581 Y114.698 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.592 Y115.302 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.16913 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X62.075 Y96.524 E1.03435 ; perimeter
G1 X61.750 Y96.288 E0.01657 ; perimeter
G1 X61.389 Y96.099 E0.01678 ; perimeter
G1 X61.009 Y95.968 E0.01654 ; perimeter
G1 X60.622 Y95.899 E0.01621 ; perimeter
G1 X60.235 Y95.894 E0.01594 ; perimeter
G1 X59.824 Y95.972 E0.01724 ; perimeter
G1 X59.523 Y96.084 E0.01323 ; perimeter
G1 X59.216 Y96.275 E0.01489 ; perimeter
G1 X59.121 Y96.366 E0.00544 ; perimeter
G1 X57.989 Y95.416 E0.06089 ; perimeter
G1 X58.288 Y95.111 E0.01759 ; perimeter
G1 X58.612 Y94.873 E0.01658 ; perimeter
G1 X58.977 Y94.683 E0.01693 ; perimeter
G1 X59.378 Y94.547 E0.01744 ; perimeter
G1 X59.772 Y94.472 E0.01651 ; perimeter
G1 X60.261 Y94.446 E0.02018 ; perimeter
G1 X60.675 Y94.477 E0.01713 ; perimeter
G1 X61.141 Y94.568 E0.01954 ; perimeter
G1 X61.603 Y94.715 E0.01997 ; perimeter
G1 X62.133 Y94.963 E0.02413 ; perimeter
G1 X62.492 Y95.177 E0.01720 ; perimeter
G1 X62.906 Y95.487 E0.02130 ; perimeter
G1 X81.793 Y111.335 E1.01570 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X90.445 Y114.285 E0.18904 ; perimeter
G1 X89.630 Y115.256 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.311 Y115.018 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.078 Y113.178 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X54.042 Y106.839 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X51.544 Y104.744 E0.13432 ; perimeter
G1 X49.095 Y107.662 E0.15696 ; perimeter
G1 X48.588 Y107.236 E0.02729 ; perimeter
G1 X57.585 Y96.514 E0.57663 ; perimeter
G1 X58.093 Y96.940 E0.02729 ; perimeter
G1 X55.644 Y99.858 E0.15696 ; perimeter
G1 X58.141 Y101.954 E0.13432 ; perimeter
G1 X57.797 Y102.364 E0.02205 ; perimeter
G1 X55.300 Y100.268 E0.13432 ; perimeter
G1 X51.889 Y104.333 E0.21861 ; perimeter
G1 X54.386 Y106.429 E0.13432 ; perimeter
G1 X54.081 Y106.793 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.091 Y107.398 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X51.593 Y105.302 E0.13432 ; perimeter
G1 X49.144 Y108.221 E0.15696 ; perimeter
G1 X48.029 Y107.285 E0.05995 ; perimeter
G1 X57.536 Y95.955 E0.60929 ; perimeter
G1 X58.651 Y96.891 E0.05995 ; perimeter
G1 X56.202 Y99.809 E0.15696 ; perimeter
G1 X58.700 Y101.905 E0.13432 ; perimeter
G1 X57.846 Y102.923 E0.05471 ; perimeter
G1 X55.348 Y100.827 E0.13432 ; perimeter
G1 X52.447 Y104.285 E0.18596 ; perimeter
G1 X54.945 Y106.380 E0.13432 ; perimeter
G1 X54.130 Y107.352 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.820 Y107.103 F10800.000 ; move inwards before travel
G1 F8640
G1 X51.593 Y105.302 E-0.75301 ; wipe and retract
G1 X51.574 Y105.325 E-0.00699 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X76.618 Y138.051 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q85 S21
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.621 Y113.719 E1.55936 ; perimeter
G1 X47.268 Y113.389 E0.01995 ; perimeter
G1 X46.967 Y113.038 E0.01901 ; perimeter
G1 X46.713 Y112.664 E0.01864 ; perimeter
G1 X46.508 Y112.274 E0.01815 ; perimeter
G1 X46.354 Y111.875 E0.01762 ; perimeter
G1 X46.263 Y111.517 E0.01520 ; perimeter
G1 X46.212 Y111.118 E0.01656 ; perimeter
G1 X46.216 Y110.737 E0.01571 ; perimeter
G1 X46.271 Y110.377 E0.01502 ; perimeter
G1 X46.376 Y110.042 E0.01443 ; perimeter
G1 X46.527 Y109.737 E0.01401 ; perimeter
G1 X46.735 Y109.444 E0.01482 ; perimeter
G1 X47.626 Y108.383 E0.05709 ; perimeter
G1 X48.133 Y108.809 E0.02729 ; perimeter
G1 X47.369 Y109.720 E0.04901 ; perimeter
G1 X47.140 Y110.060 E0.01685 ; perimeter
G1 X46.975 Y110.471 E0.01826 ; perimeter
G1 X46.895 Y110.909 E0.01834 ; perimeter
G1 X46.899 Y111.357 E0.01847 ; perimeter
G1 X46.983 Y111.802 E0.01864 ; perimeter
G1 X47.141 Y112.231 E0.01884 ; perimeter
G1 X47.366 Y112.635 E0.01903 ; perimeter
G1 X47.650 Y113.003 E0.01917 ; perimeter
G1 X47.969 Y113.313 E0.01834 ; perimeter
G1 X76.962 Y137.640 E1.55913 ; perimeter
G1 X76.656 Y138.005 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.666 Y138.609 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X47.358 Y114.016 E1.57613 ; perimeter
G1 X46.981 Y113.663 E0.02129 ; perimeter
G1 X46.652 Y113.279 E0.02081 ; perimeter
G1 X46.372 Y112.868 E0.02048 ; perimeter
G1 X46.146 Y112.438 E0.02004 ; perimeter
G1 X45.976 Y111.995 E0.01954 ; perimeter
G1 X45.873 Y111.592 E0.01716 ; perimeter
G1 X45.816 Y111.142 E0.01868 ; perimeter
G1 X45.820 Y110.705 E0.01800 ; perimeter
G1 X45.884 Y110.287 E0.01742 ; perimeter
G1 X46.007 Y109.895 E0.01693 ; perimeter
G1 X46.185 Y109.534 E0.01658 ; perimeter
G1 X46.421 Y109.202 E0.01677 ; perimeter
G1 X47.577 Y107.824 E0.07407 ; perimeter
G1 X48.692 Y108.760 E0.05995 ; perimeter
G1 X47.686 Y109.959 E0.06447 ; perimeter
G1 X47.493 Y110.246 E0.01426 ; perimeter
G1 X47.358 Y110.581 E0.01489 ; perimeter
G1 X47.292 Y110.943 E0.01513 ; perimeter
G1 X47.295 Y111.318 E0.01546 ; perimeter
G1 X47.367 Y111.696 E0.01584 ; perimeter
G1 X47.502 Y112.065 E0.01621 ; perimeter
G1 X47.697 Y112.416 E0.01654 ; perimeter
G1 X47.946 Y112.739 E0.01678 ; perimeter
G1 X48.235 Y113.019 E0.01657 ; perimeter
G1 X77.520 Y137.592 E1.57487 ; perimeter
G1 X76.705 Y138.563 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.363 Y138.348 F10800.000 ; move inwards before travel
G1 F8640
G1 X74.180 Y136.451 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X150.728 Y114.365 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y113.845 E0.02141 ; perimeter
G1 X151.868 Y113.605 E0.04798 ; perimeter
G1 X151.868 Y114.115 E0.02101 ; perimeter
G1 X150.787 Y114.352 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y114.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.332 Y113.522 E0.05464 ; perimeter
G1 X152.264 Y113.105 E0.08144 ; perimeter
G1 X152.264 Y114.434 E0.05476 ; perimeter
G1 X150.390 Y114.837 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y115.329 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.935 Y113.200 E0.08770 ; perimeter
G1 X151.578 Y112.859 E0.06910 ; perimeter
G1 X152.660 Y112.604 E0.04581 ; perimeter
G1 X152.660 Y114.753 E0.08850 ; perimeter
G1 X150.727 Y115.176 E0.08153 ; perimeter
G1 X149.994 Y115.317 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.111 Y114.969 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.935 Y113.200 E-0.48911 ; wipe and retract
G1 X151.084 Y112.961 E-0.27089 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X165.006 Y117.376 E0.06694 ; perimeter
G1 X165.350 Y117.786 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.06694 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X172.027 Y125.742 E0.06694 ; perimeter
G1 X172.371 Y126.152 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.06694 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X165.055 Y116.817 E0.06694 ; perimeter
G1 X165.909 Y117.835 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.06694 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X172.076 Y125.184 E0.06694 ; perimeter
G1 X172.929 Y126.201 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.06694 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y139.253 E0.04011 ; perimeter
G1 X169.775 Y139.253 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.04011 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.462 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.857 E0.06321 ; perimeter
G1 X170.171 Y138.857 E0.21040 ; perimeter
G1 X170.171 Y140.391 E0.06321 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.522 Y140.789 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.298 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y138.460 E0.08630 ; perimeter
G1 X170.567 Y138.460 E0.24306 ; perimeter
G1 X170.567 Y140.555 E0.08630 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.358 Y141.185 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.282 Y140.786 F10800.000 ; move inwards before travel
G1 X165.686 Y140.278 ; move to first infill point
G1 F7168.6
G1 X166.395 Y139.569 E0.05230 ; infill
G1 X167.105 Y139.569 E0.03707 ; infill
G1 X166.598 Y140.077 E0.03747 ; infill
G1 X167.308 Y140.077 E0.03707 ; infill
G1 X167.815 Y139.569 E0.03747 ; infill
G1 X168.526 Y139.569 E0.03707 ; infill
G1 X168.018 Y140.077 E0.03747 ; infill
G1 X168.728 Y140.077 E0.03707 ; infill
G1 X169.236 Y139.569 E0.03747 ; infill
G1 X169.459 Y139.569 E0.01163 ; infill
G1 X169.459 Y140.056 E0.02544 ; infill
G1 X169.238 Y140.278 E0.01633 ; infill
G1 F8640
G1 X169.459 Y140.056 E-0.07222 ; wipe and retract
G1 X169.459 Y139.569 E-0.11252 ; wipe and retract
G1 X169.236 Y139.569 E-0.05147 ; wipe and retract
G1 X168.728 Y140.077 E-0.16576 ; wipe and retract
G1 X168.018 Y140.077 E-0.16399 ; wipe and retract
G1 X168.526 Y139.569 E-0.16576 ; wipe and retract
G1 X168.403 Y139.569 E-0.02830 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X172.812 Y138.051 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X172.468 Y137.640 E0.02205 ; perimeter
G1 X201.460 Y113.313 E1.55913 ; perimeter
G1 X201.780 Y113.003 E0.01834 ; perimeter
G1 X202.064 Y112.635 E0.01917 ; perimeter
G1 X202.289 Y112.231 E0.01903 ; perimeter
G1 X202.449 Y111.795 E0.01913 ; perimeter
G1 X202.531 Y111.300 E0.02066 ; perimeter
G1 X202.534 Y110.909 E0.01614 ; perimeter
G1 X202.454 Y110.471 E0.01834 ; perimeter
G1 X202.289 Y110.060 E0.01826 ; perimeter
G1 X202.061 Y109.720 E0.01685 ; perimeter
G1 X201.296 Y108.809 E0.04901 ; perimeter
G1 X201.804 Y108.383 E0.02729 ; perimeter
G1 X202.661 Y109.405 E0.05496 ; perimeter
G1 X202.904 Y109.740 E0.01705 ; perimeter
G1 X203.054 Y110.042 E0.01390 ; perimeter
G1 X203.158 Y110.378 E0.01447 ; perimeter
G1 X203.211 Y110.709 E0.01383 ; perimeter
G1 X203.217 Y111.120 E0.01693 ; perimeter
G1 X203.166 Y111.517 E0.01648 ; perimeter
G1 X203.075 Y111.875 E0.01520 ; perimeter
G1 X202.923 Y112.271 E0.01747 ; perimeter
G1 X202.678 Y112.724 E0.02124 ; perimeter
G1 X202.463 Y113.037 E0.01565 ; perimeter
G1 X202.162 Y113.389 E0.01906 ; perimeter
G1 X201.809 Y113.719 E0.01995 ; perimeter
G1 X172.858 Y138.012 E1.55689 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.763 Y138.609 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X171.910 Y137.592 E0.05471 ; perimeter
G1 X201.195 Y113.019 E1.57487 ; perimeter
G1 X201.484 Y112.739 E0.01657 ; perimeter
G1 X201.732 Y112.416 E0.01678 ; perimeter
G1 X201.927 Y112.065 E0.01654 ; perimeter
G1 X202.064 Y111.694 E0.01632 ; perimeter
G1 X202.135 Y111.266 E0.01785 ; perimeter
G1 X202.138 Y110.943 E0.01332 ; perimeter
G1 X202.072 Y110.581 E0.01513 ; perimeter
G1 X201.937 Y110.246 E0.01489 ; perimeter
G1 X201.744 Y109.959 E0.01426 ; perimeter
G1 X200.738 Y108.760 E0.06447 ; perimeter
G1 X201.853 Y107.824 E0.05995 ; perimeter
G1 X202.974 Y109.161 E0.07187 ; perimeter
G1 X203.245 Y109.535 E0.01900 ; perimeter
G1 X203.423 Y109.895 E0.01654 ; perimeter
G1 X203.545 Y110.287 E0.01695 ; perimeter
G1 X203.607 Y110.675 E0.01618 ; perimeter
G1 X203.614 Y111.142 E0.01925 ; perimeter
G1 X203.557 Y111.592 E0.01865 ; perimeter
G1 X203.454 Y111.995 E0.01716 ; perimeter
G1 X203.284 Y112.437 E0.01948 ; perimeter
G1 X203.017 Y112.931 E0.02315 ; perimeter
G1 X202.778 Y113.279 E0.01738 ; perimeter
G1 X202.449 Y113.663 E0.02083 ; perimeter
G1 X202.072 Y114.016 E0.02129 ; perimeter
G1 X172.809 Y138.570 E1.57366 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.694 Y138.215 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.910 Y137.592 E-0.30695 ; wipe and retract
G1 X173.413 Y136.330 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X195.387 Y106.839 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X195.043 Y106.429 E0.02205 ; perimeter
G1 X197.541 Y104.333 E0.13432 ; perimeter
G1 X194.130 Y100.268 E0.21861 ; perimeter
G1 X191.632 Y102.364 E0.13432 ; perimeter
G1 X191.288 Y101.954 E0.02205 ; perimeter
G1 X193.786 Y99.858 E0.13432 ; perimeter
G1 X191.337 Y96.940 E0.15696 ; perimeter
G1 X191.844 Y96.514 E0.02730 ; perimeter
G1 X200.842 Y107.236 E0.57663 ; perimeter
G1 X200.334 Y107.662 E0.02730 ; perimeter
G1 X197.885 Y104.744 E0.15696 ; perimeter
G1 X195.433 Y106.801 E0.13185 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.339 Y107.398 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X194.485 Y106.380 E0.05471 ; perimeter
G1 X196.983 Y104.285 E0.13432 ; perimeter
G1 X194.081 Y100.827 E0.18596 ; perimeter
G1 X191.583 Y102.923 E0.13432 ; perimeter
G1 X190.730 Y101.905 E0.05471 ; perimeter
G1 X193.228 Y99.809 E0.13432 ; perimeter
G1 X190.779 Y96.891 E0.15696 ; perimeter
G1 X191.893 Y95.955 E0.05995 ; perimeter
G1 X201.400 Y107.285 E0.60929 ; perimeter
G1 X200.285 Y108.221 E0.05995 ; perimeter
G1 X197.836 Y105.302 E0.15696 ; perimeter
G1 X195.385 Y107.359 E0.13185 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.384 Y107.000 F10800.000 ; move inwards before travel
G1 F8640
G1 X194.485 Y106.380 E-0.30695 ; wipe and retract
G1 X195.988 Y105.119 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
G1 X159.887 Y114.744 ; move to first perimeter point
G1 Z19.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.543 Y114.334 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.16677 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X186.771 Y95.798 E1.02120 ; perimeter
G1 X187.158 Y95.507 E0.01998 ; perimeter
G1 X187.482 Y95.314 E0.01552 ; perimeter
G1 X187.972 Y95.085 E0.02228 ; perimeter
G1 X188.387 Y94.952 E0.01796 ; perimeter
G1 X188.805 Y94.871 E0.01755 ; perimeter
G1 X189.216 Y94.842 E0.01696 ; perimeter
G1 X189.573 Y94.862 E0.01472 ; perimeter
G1 X189.978 Y94.940 E0.01701 ; perimeter
G1 X190.296 Y95.049 E0.01383 ; perimeter
G1 X190.608 Y95.210 E0.01447 ; perimeter
G1 X190.854 Y95.391 E0.01258 ; perimeter
G1 X190.296 Y95.859 E0.03000 ; perimeter
G1 X190.082 Y95.726 E0.01038 ; perimeter
G1 X189.665 Y95.571 E0.01834 ; perimeter
G1 X189.223 Y95.497 E0.01847 ; perimeter
G1 X188.770 Y95.503 E0.01864 ; perimeter
G1 X188.320 Y95.583 E0.01884 ; perimeter
G1 X187.883 Y95.735 E0.01903 ; perimeter
G1 X187.471 Y95.950 E0.01915 ; perimeter
G1 X187.127 Y96.199 E0.01750 ; perimeter
G1 X167.976 Y112.267 E1.02985 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.933 Y114.705 E0.15627 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.838 Y115.302 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X158.985 Y114.285 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.18904 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X186.524 Y95.487 E1.01570 ; perimeter
G1 X186.938 Y95.177 E0.02130 ; perimeter
G1 X187.296 Y94.963 E0.01720 ; perimeter
G1 X187.827 Y94.715 E0.02413 ; perimeter
G1 X188.289 Y94.568 E0.01997 ; perimeter
G1 X188.754 Y94.477 E0.01951 ; perimeter
G1 X189.213 Y94.445 E0.01897 ; perimeter
G1 X189.621 Y94.467 E0.01685 ; perimeter
G1 X190.081 Y94.556 E0.01928 ; perimeter
G1 X190.452 Y94.683 E0.01618 ; perimeter
G1 X190.818 Y94.873 E0.01695 ; perimeter
G1 X191.142 Y95.111 E0.01658 ; perimeter
G1 X191.441 Y95.416 E0.01759 ; perimeter
G1 X190.309 Y96.366 E0.06089 ; perimeter
G1 X190.214 Y96.275 E0.00544 ; perimeter
G1 X189.907 Y96.084 E0.01489 ; perimeter
G1 X189.562 Y95.956 E0.01513 ; perimeter
G1 X189.192 Y95.894 E0.01546 ; perimeter
G1 X188.808 Y95.899 E0.01584 ; perimeter
G1 X188.420 Y95.968 E0.01621 ; perimeter
G1 X188.041 Y96.099 E0.01654 ; perimeter
G1 X187.680 Y96.288 E0.01677 ; perimeter
G1 X187.370 Y96.511 E0.01573 ; perimeter
G1 X168.120 Y112.663 E1.03520 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X159.884 Y115.264 E0.16666 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.820 Y114.903 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;19.25


G1 F8640
G1 X158.985 Y114.285 E-0.30695 ; wipe and retract
G1 X160.488 Y113.024 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;19.25
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y101.107 E0.04011 ; perimeter
G1 X84.255 Y101.107 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.04011 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.253 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.711 E0.06321 ; perimeter
G1 X84.651 Y100.711 E0.21040 ; perimeter
G1 X84.651 Y102.245 E0.06321 ; perimeter
G1 X84.296 Y102.600 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.417 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y100.314 E0.08630 ; perimeter
G1 X85.047 Y100.314 E0.24305 ; perimeter
G1 X85.047 Y102.409 E0.08630 ; perimeter
G1 X84.460 Y102.997 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.087 Y102.814 F10800.000 ; move inwards before travel
G1 X84.028 Y102.131 ; move to first infill point
G1 F7168.6
G1 X83.320 Y101.423 E0.05230 ; infill
G1 X82.610 Y101.423 E0.03707 ; infill
G1 X83.117 Y101.931 E0.03747 ; infill
G1 X82.407 Y101.931 E0.03707 ; infill
G1 X81.899 Y101.423 E0.03747 ; infill
G1 X81.189 Y101.423 E0.03707 ; infill
G1 X81.697 Y101.931 E0.03747 ; infill
G1 X80.987 Y101.931 E0.03707 ; infill
G1 X80.479 Y101.423 E0.03747 ; infill
G1 X80.256 Y101.423 E0.01163 ; infill
G1 X80.256 Y101.910 E0.02544 ; infill
G1 X80.477 Y102.131 E0.01631 ; infill
G1 F8640
G1 X80.256 Y101.910 E-0.07217 ; wipe and retract
G1 X80.256 Y101.423 E-0.11255 ; wipe and retract
G1 X80.479 Y101.423 E-0.05143 ; wipe and retract
G1 X80.987 Y101.931 E-0.16576 ; wipe and retract
G1 X81.697 Y101.931 E-0.16399 ; wipe and retract
G1 X81.189 Y101.423 E-0.16576 ; wipe and retract
G1 X81.312 Y101.423 E-0.02834 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X77.406 Y88.059 E0.06359 ; perimeter
G1 X77.750 Y87.648 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.06359 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X84.427 Y79.692 E0.06359 ; perimeter
G1 X84.771 Y79.282 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.06359 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X76.848 Y88.107 E0.06359 ; perimeter
G1 X77.701 Y87.090 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.06359 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X83.868 Y79.741 E0.06359 ; perimeter
G1 X84.722 Y78.723 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.06359 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X98.987 Y76.219 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y75.969 E0.04806 ; perimeter
G1 X97.847 Y75.459 E0.02100 ; perimeter
G1 X98.987 Y75.699 E0.04797 ; perimeter
G1 X98.987 Y76.159 E0.01895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y76.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.451 Y76.288 E0.08142 ; perimeter
G1 X97.451 Y74.959 E0.05475 ; perimeter
G1 X99.383 Y75.376 E0.08144 ; perimeter
G1 X99.383 Y76.643 E0.05217 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y77.183 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.988 Y77.030 E0.03321 ; perimeter
G1 X97.055 Y76.607 E0.08153 ; perimeter
G1 X97.055 Y74.459 E0.08849 ; perimeter
G1 X98.110 Y74.707 E0.04467 ; perimeter
G1 X99.780 Y75.054 E0.07024 ; perimeter
G1 X99.780 Y77.123 E0.08523 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.420 Y77.008 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.988 Y77.030 E-0.18405 ; wipe and retract
G1 X97.055 Y76.607 E-0.45698 ; wipe and retract
G1 X97.055 Y76.091 E-0.11896 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X89.774 Y76.553 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.15587 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X62.470 Y57.953 E1.03621 ; perimeter
G1 X62.110 Y57.692 E0.01834 ; perimeter
G1 X61.697 Y57.476 E0.01917 ; perimeter
G1 X61.261 Y57.325 E0.01903 ; perimeter
G1 X60.811 Y57.244 E0.01884 ; perimeter
G1 X60.354 Y57.239 E0.01882 ; perimeter
G1 X59.888 Y57.323 E0.01951 ; perimeter
G1 X59.499 Y57.467 E0.01710 ; perimeter
G1 X59.285 Y57.600 E0.01039 ; perimeter
G1 X58.727 Y57.132 E0.03000 ; perimeter
G1 X58.971 Y56.953 E0.01250 ; perimeter
G1 X59.281 Y56.792 E0.01439 ; perimeter
G1 X59.626 Y56.674 E0.01500 ; perimeter
G1 X59.980 Y56.606 E0.01485 ; perimeter
G1 X60.399 Y56.584 E0.01728 ; perimeter
G1 X60.780 Y56.613 E0.01576 ; perimeter
G1 X61.198 Y56.695 E0.01756 ; perimeter
G1 X61.613 Y56.828 E0.01795 ; perimeter
G1 X62.085 Y57.047 E0.02142 ; perimeter
G1 X62.424 Y57.249 E0.01624 ; perimeter
G1 X62.810 Y57.539 E0.01991 ; perimeter
G1 X81.934 Y73.586 E1.02841 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.118 Y76.143 E0.16390 ; perimeter
G1 X89.813 Y76.507 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.823 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.16626 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X62.227 Y58.265 E1.04157 ; perimeter
G1 X61.901 Y58.030 E0.01657 ; perimeter
G1 X61.540 Y57.841 E0.01678 ; perimeter
G1 X61.161 Y57.709 E0.01654 ; perimeter
G1 X60.773 Y57.640 E0.01621 ; perimeter
G1 X60.387 Y57.635 E0.01590 ; perimeter
G1 X59.993 Y57.707 E0.01651 ; perimeter
G1 X59.674 Y57.825 E0.01401 ; perimeter
G1 X59.367 Y58.016 E0.01489 ; perimeter
G1 X59.272 Y58.107 E0.00544 ; perimeter
G1 X58.140 Y57.157 E0.06089 ; perimeter
G1 X58.438 Y56.853 E0.01755 ; perimeter
G1 X58.761 Y56.615 E0.01654 ; perimeter
G1 X59.125 Y56.426 E0.01688 ; perimeter
G1 X59.524 Y56.290 E0.01737 ; perimeter
G1 X59.932 Y56.212 E0.01711 ; perimeter
G1 X60.403 Y56.187 E0.01944 ; perimeter
G1 X60.833 Y56.219 E0.01778 ; perimeter
G1 X61.298 Y56.310 E0.01948 ; perimeter
G1 X61.758 Y56.458 E0.01993 ; perimeter
G1 X62.270 Y56.696 E0.02326 ; perimeter
G1 X62.644 Y56.919 E0.01795 ; perimeter
G1 X63.057 Y57.228 E0.02123 ; perimeter
G1 X82.078 Y73.189 E1.02292 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X90.677 Y76.094 E0.18617 ; perimeter
G1 X89.862 Y77.065 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.543 Y76.826 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.309 Y74.987 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X54.188 Y68.576 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X51.696 Y66.485 E0.13405 ; perimeter
G1 X49.247 Y69.403 E0.15696 ; perimeter
G1 X48.739 Y68.978 E0.02729 ; perimeter
G1 X57.736 Y58.255 E0.57663 ; perimeter
G1 X58.244 Y58.681 E0.02729 ; perimeter
G1 X55.795 Y61.600 E0.15696 ; perimeter
G1 X58.287 Y63.691 E0.13405 ; perimeter
G1 X57.943 Y64.101 E0.02205 ; perimeter
G1 X55.451 Y62.010 E0.13405 ; perimeter
G1 X52.040 Y66.075 E0.21861 ; perimeter
G1 X54.532 Y68.166 E0.13405 ; perimeter
G1 X54.227 Y68.531 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.237 Y69.135 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X51.744 Y67.043 E0.13405 ; perimeter
G1 X49.295 Y69.962 E0.15696 ; perimeter
G1 X48.181 Y69.026 E0.05995 ; perimeter
G1 X57.687 Y57.697 E0.60929 ; perimeter
G1 X58.802 Y58.632 E0.05995 ; perimeter
G1 X56.353 Y61.551 E0.15696 ; perimeter
G1 X58.846 Y63.642 E0.13405 ; perimeter
G1 X57.992 Y64.660 E0.05471 ; perimeter
G1 X55.500 Y62.568 E0.13405 ; perimeter
G1 X52.598 Y66.026 E0.18596 ; perimeter
G1 X55.091 Y68.118 E0.13405 ; perimeter
G1 X54.276 Y69.089 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.966 Y68.840 F10800.000 ; move inwards before travel
G1 F8640
G1 X51.744 Y67.043 E-0.75149 ; wipe and retract
G1 X51.721 Y67.071 E-0.00851 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X76.711 Y99.744 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.772 Y75.461 E1.55627 ; perimeter
G1 X47.420 Y75.131 E0.01988 ; perimeter
G1 X47.120 Y74.782 E0.01896 ; perimeter
G1 X46.866 Y74.409 E0.01859 ; perimeter
G1 X46.661 Y74.020 E0.01810 ; perimeter
G1 X46.507 Y73.623 E0.01756 ; perimeter
G1 X46.413 Y73.251 E0.01581 ; perimeter
G1 X46.363 Y72.854 E0.01647 ; perimeter
G1 X46.367 Y72.474 E0.01565 ; perimeter
G1 X46.423 Y72.115 E0.01497 ; perimeter
G1 X46.528 Y71.782 E0.01439 ; perimeter
G1 X46.678 Y71.478 E0.01397 ; perimeter
G1 X46.886 Y71.186 E0.01478 ; perimeter
G1 X47.777 Y70.124 E0.05709 ; perimeter
G1 X48.284 Y70.550 E0.02729 ; perimeter
G1 X47.520 Y71.461 E0.04901 ; perimeter
G1 X47.292 Y71.801 E0.01685 ; perimeter
G1 X47.126 Y72.212 E0.01826 ; perimeter
G1 X47.046 Y72.650 E0.01834 ; perimeter
G1 X47.051 Y73.098 E0.01847 ; perimeter
G1 X47.134 Y73.543 E0.01864 ; perimeter
G1 X47.292 Y73.972 E0.01884 ; perimeter
G1 X47.517 Y74.376 E0.01903 ; perimeter
G1 X47.801 Y74.745 E0.01917 ; perimeter
G1 X48.120 Y75.054 E0.01834 ; perimeter
G1 X77.055 Y99.334 E1.55604 ; perimeter
G1 X76.750 Y99.698 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.760 Y100.302 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X47.509 Y75.757 E1.57305 ; perimeter
G1 X47.133 Y75.405 E0.02122 ; perimeter
G1 X46.805 Y75.023 E0.02075 ; perimeter
G1 X46.526 Y74.614 E0.02042 ; perimeter
G1 X46.299 Y74.185 E0.01998 ; perimeter
G1 X46.129 Y73.743 E0.01948 ; perimeter
G1 X46.022 Y73.325 E0.01780 ; perimeter
G1 X45.966 Y72.877 E0.01860 ; perimeter
G1 X45.971 Y72.441 E0.01794 ; perimeter
G1 X46.036 Y72.025 E0.01736 ; perimeter
G1 X46.159 Y71.634 E0.01688 ; perimeter
G1 X46.337 Y71.274 E0.01654 ; perimeter
G1 X46.572 Y70.943 E0.01673 ; perimeter
G1 X47.728 Y69.566 E0.07407 ; perimeter
G1 X48.843 Y70.501 E0.05995 ; perimeter
G1 X47.837 Y71.700 E0.06447 ; perimeter
G1 X47.644 Y71.987 E0.01426 ; perimeter
G1 X47.509 Y72.323 E0.01489 ; perimeter
G1 X47.443 Y72.684 E0.01513 ; perimeter
G1 X47.447 Y73.059 E0.01546 ; perimeter
G1 X47.518 Y73.437 E0.01584 ; perimeter
G1 X47.653 Y73.807 E0.01621 ; perimeter
G1 X47.849 Y74.157 E0.01654 ; perimeter
G1 X48.097 Y74.480 E0.01678 ; perimeter
G1 X48.386 Y74.760 E0.01657 ; perimeter
G1 X77.614 Y99.285 E1.57178 ; perimeter
G1 X76.799 Y100.256 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.457 Y100.041 F10800.000 ; move inwards before travel
G1 F8640
G1 X74.274 Y98.144 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X151.013 Y76.219 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y75.699 E0.02142 ; perimeter
G1 X152.153 Y75.459 E0.04797 ; perimeter
G1 X152.153 Y75.969 E0.02100 ; perimeter
G1 X151.072 Y76.206 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y76.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.617 Y75.376 E0.05465 ; perimeter
G1 X152.549 Y74.959 E0.08144 ; perimeter
G1 X152.549 Y76.288 E0.05475 ; perimeter
G1 X150.676 Y76.691 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y77.183 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.220 Y75.054 E0.08770 ; perimeter
G1 X151.890 Y74.707 E0.07024 ; perimeter
G1 X152.945 Y74.458 E0.04467 ; perimeter
G1 X152.945 Y76.607 E0.08850 ; perimeter
G1 X151.012 Y77.030 E0.08153 ; perimeter
G1 X150.279 Y77.171 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.396 Y76.823 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.220 Y75.054 E-0.48912 ; wipe and retract
G1 X151.369 Y74.815 E-0.27088 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X165.229 Y79.282 E0.06359 ; perimeter
G1 X165.573 Y79.692 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.06359 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X172.250 Y87.648 E0.06359 ; perimeter
G1 X172.594 Y88.059 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.06359 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X165.278 Y78.723 E0.06359 ; perimeter
G1 X166.132 Y79.741 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.06359 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X172.299 Y87.090 E0.06359 ; perimeter
G1 X173.152 Y88.107 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.06359 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y101.107 E0.04011 ; perimeter
G1 X170.060 Y101.107 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.04011 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.747 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.711 E0.06321 ; perimeter
G1 X170.456 Y100.711 E0.21040 ; perimeter
G1 X170.456 Y102.245 E0.06321 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.807 Y102.643 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.583 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y100.314 E0.08630 ; perimeter
G1 X170.853 Y100.314 E0.24306 ; perimeter
G1 X170.853 Y102.409 E0.08630 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.643 Y103.039 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.567 Y102.640 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.953 Y102.409 E-0.21581 ; wipe and retract
G1 X164.953 Y100.314 E-0.48370 ; wipe and retract
G1 X165.215 Y100.314 E-0.06050 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X166.282 Y102.131 ; move to first infill point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.6
G1 X166.061 Y101.910 E0.01632 ; infill
G1 X166.061 Y101.423 E0.02544 ; infill
G1 X166.284 Y101.423 E0.01163 ; infill
G1 X166.792 Y101.931 E0.03747 ; infill
G1 X167.502 Y101.931 E0.03707 ; infill
G1 X166.994 Y101.423 E0.03747 ; infill
G1 X167.704 Y101.423 E0.03707 ; infill
G1 X168.212 Y101.931 E0.03747 ; infill
G1 X168.922 Y101.931 E0.03707 ; infill
G1 X168.415 Y101.423 E0.03747 ; infill
G1 X169.125 Y101.423 E0.03707 ; infill
G1 X169.833 Y102.131 E0.05230 ; infill
G1 F8640
G1 X169.125 Y101.423 E-0.23134 ; wipe and retract
G1 X168.415 Y101.423 E-0.16399 ; wipe and retract
G1 X168.922 Y101.931 E-0.16576 ; wipe and retract
G1 X168.212 Y101.931 E-0.16399 ; wipe and retract
G1 X168.105 Y101.824 E-0.03492 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X173.289 Y99.744 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X172.945 Y99.334 E0.02205 ; perimeter
G1 X201.880 Y75.054 E1.55604 ; perimeter
G1 X202.199 Y74.745 E0.01834 ; perimeter
G1 X202.483 Y74.376 E0.01917 ; perimeter
G1 X202.708 Y73.972 E0.01903 ; perimeter
G1 X202.867 Y73.539 E0.01903 ; perimeter
G1 X202.950 Y73.063 E0.01990 ; perimeter
G1 X202.954 Y72.650 E0.01701 ; perimeter
G1 X202.874 Y72.212 E0.01834 ; perimeter
G1 X202.708 Y71.801 E0.01826 ; perimeter
G1 X202.480 Y71.461 E0.01685 ; perimeter
G1 X201.716 Y70.550 E0.04901 ; perimeter
G1 X202.223 Y70.124 E0.02729 ; perimeter
G1 X203.104 Y71.174 E0.05648 ; perimeter
G1 X203.322 Y71.479 E0.01542 ; perimeter
G1 X203.472 Y71.782 E0.01393 ; perimeter
G1 X203.577 Y72.116 E0.01441 ; perimeter
G1 X203.631 Y72.461 E0.01438 ; perimeter
G1 X203.637 Y72.855 E0.01625 ; perimeter
G1 X203.587 Y73.251 E0.01643 ; perimeter
G1 X203.493 Y73.623 E0.01581 ; perimeter
G1 X203.340 Y74.018 E0.01744 ; perimeter
G1 X203.105 Y74.454 E0.02041 ; perimeter
G1 X202.881 Y74.781 E0.01635 ; perimeter
G1 X202.580 Y75.131 E0.01899 ; perimeter
G1 X202.228 Y75.461 E0.01989 ; perimeter
G1 X173.335 Y99.705 E1.55380 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.240 Y100.302 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X172.386 Y99.285 E0.05471 ; perimeter
G1 X201.614 Y74.760 E1.57178 ; perimeter
G1 X201.903 Y74.480 E0.01657 ; perimeter
G1 X202.151 Y74.157 E0.01678 ; perimeter
G1 X202.347 Y73.807 E0.01654 ; perimeter
G1 X202.483 Y73.436 E0.01628 ; perimeter
G1 X202.554 Y73.027 E0.01709 ; perimeter
G1 X202.557 Y72.684 E0.01412 ; perimeter
G1 X202.491 Y72.323 E0.01513 ; perimeter
G1 X202.356 Y71.987 E0.01489 ; perimeter
G1 X202.163 Y71.700 E0.01426 ; perimeter
G1 X201.157 Y70.501 E0.06447 ; perimeter
G1 X202.272 Y69.566 E0.05995 ; perimeter
G1 X203.418 Y70.931 E0.07344 ; perimeter
G1 X203.663 Y71.274 E0.01737 ; perimeter
G1 X203.841 Y71.634 E0.01652 ; perimeter
G1 X203.964 Y72.025 E0.01689 ; perimeter
G1 X204.027 Y72.427 E0.01676 ; perimeter
G1 X204.034 Y72.877 E0.01855 ; perimeter
G1 X203.978 Y73.325 E0.01859 ; perimeter
G1 X203.871 Y73.743 E0.01780 ; perimeter
G1 X203.701 Y74.184 E0.01944 ; perimeter
G1 X203.444 Y74.660 E0.02232 ; perimeter
G1 X203.195 Y75.023 E0.01811 ; perimeter
G1 X202.867 Y75.405 E0.02077 ; perimeter
G1 X202.491 Y75.757 E0.02122 ; perimeter
G1 X173.286 Y100.264 E1.57057 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.170 Y99.908 F10800.000 ; move inwards before travel
G1 F8640
G1 X172.386 Y99.285 E-0.30695 ; wipe and retract
G1 X173.889 Y98.024 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X195.812 Y68.576 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 P85 R19
M204 S800 ; adjust acceleration
G1 F4800
G1 X195.468 Y68.166 E0.02205 ; perimeter
G1 X197.960 Y66.075 E0.13405 ; perimeter
G1 X194.549 Y62.010 E0.21861 ; perimeter
G1 X192.057 Y64.101 E0.13405 ; perimeter
G1 X191.713 Y63.691 E0.02205 ; perimeter
G1 X194.205 Y61.600 E0.13405 ; perimeter
G1 X191.756 Y58.681 E0.15696 ; perimeter
G1 X192.264 Y58.255 E0.02729 ; perimeter
G1 X201.261 Y68.978 E0.57663 ; perimeter
G1 X200.753 Y69.403 E0.02730 ; perimeter
G1 X198.304 Y66.485 E0.15696 ; perimeter
G1 X195.858 Y68.538 E0.13158 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.763 Y69.135 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X194.909 Y68.118 E0.05471 ; perimeter
G1 X197.402 Y66.026 E0.13405 ; perimeter
G1 X194.500 Y62.568 E0.18596 ; perimeter
G1 X192.008 Y64.660 E0.13405 ; perimeter
G1 X191.154 Y63.642 E0.05471 ; perimeter
G1 X193.647 Y61.551 E0.13405 ; perimeter
G1 X191.198 Y58.632 E0.15696 ; perimeter
G1 X192.313 Y57.697 E0.05995 ; perimeter
G1 X201.819 Y69.026 E0.60929 ; perimeter
G1 X200.705 Y69.962 E0.05995 ; perimeter
G1 X198.256 Y67.043 E0.15696 ; perimeter
G1 X195.809 Y69.096 E0.13158 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.808 Y68.737 F10800.000 ; move inwards before travel
G1 F8640
G1 X194.909 Y68.118 E-0.30695 ; wipe and retract
G1 X196.412 Y66.856 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X160.226 Y76.553 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.882 Y76.143 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.16390 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X187.190 Y57.539 E1.02841 ; perimeter
G1 X187.576 Y57.249 E0.01991 ; perimeter
G1 X187.915 Y57.047 E0.01624 ; perimeter
G1 X188.387 Y56.828 E0.02142 ; perimeter
G1 X188.802 Y56.695 E0.01795 ; perimeter
G1 X189.219 Y56.613 E0.01751 ; perimeter
G1 X189.628 Y56.584 E0.01689 ; perimeter
G1 X190.000 Y56.604 E0.01534 ; perimeter
G1 X190.388 Y56.678 E0.01630 ; perimeter
G1 X190.718 Y56.791 E0.01439 ; perimeter
G1 X191.029 Y56.953 E0.01441 ; perimeter
G1 X191.273 Y57.132 E0.01250 ; perimeter
G1 X190.715 Y57.600 E0.03000 ; perimeter
G1 X190.501 Y57.467 E0.01038 ; perimeter
G1 X190.084 Y57.313 E0.01834 ; perimeter
G1 X189.642 Y57.239 E0.01847 ; perimeter
G1 X189.189 Y57.244 E0.01864 ; perimeter
G1 X188.739 Y57.325 E0.01884 ; perimeter
G1 X188.303 Y57.476 E0.01903 ; perimeter
G1 X187.891 Y57.691 E0.01916 ; perimeter
G1 X187.542 Y57.943 E0.01769 ; perimeter
G1 X168.261 Y74.121 E1.03687 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X160.272 Y76.514 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.177 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.323 Y76.094 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.18617 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X186.943 Y57.228 E1.02292 ; perimeter
G1 X187.356 Y56.919 E0.02123 ; perimeter
G1 X187.730 Y56.696 E0.01795 ; perimeter
G1 X188.242 Y56.458 E0.02326 ; perimeter
G1 X188.702 Y56.310 E0.01993 ; perimeter
G1 X189.166 Y56.219 E0.01947 ; perimeter
G1 X189.624 Y56.187 E0.01891 ; perimeter
G1 X190.048 Y56.209 E0.01747 ; perimeter
G1 X190.490 Y56.294 E0.01857 ; perimeter
G1 X190.875 Y56.426 E0.01676 ; perimeter
G1 X191.239 Y56.615 E0.01689 ; perimeter
G1 X191.562 Y56.853 E0.01654 ; perimeter
G1 X191.860 Y57.157 E0.01755 ; perimeter
G1 X190.728 Y58.107 E0.06089 ; perimeter
G1 X190.633 Y58.016 E0.00544 ; perimeter
G1 X190.326 Y57.825 E0.01489 ; perimeter
G1 X189.982 Y57.697 E0.01513 ; perimeter
G1 X189.611 Y57.635 E0.01546 ; perimeter
G1 X189.227 Y57.640 E0.01584 ; perimeter
G1 X188.839 Y57.709 E0.01621 ; perimeter
G1 X188.460 Y57.841 E0.01654 ; perimeter
G1 X188.099 Y58.029 E0.01677 ; perimeter
G1 X187.786 Y58.256 E0.01592 ; perimeter
G1 X168.405 Y74.517 E1.04222 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X160.223 Y77.073 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.159 Y76.712 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.323 Y76.094 E-0.30695 ; wipe and retract
G1 X160.826 Y74.833 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q85 S20
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y139.253 E0.04011 ; perimeter
G1 X83.970 Y139.253 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.04011 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.968 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.857 E0.06321 ; perimeter
G1 X84.366 Y138.857 E0.21040 ; perimeter
G1 X84.366 Y140.391 E0.06321 ; perimeter
G1 X84.010 Y140.747 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.132 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y138.460 E0.08630 ; perimeter
G1 X84.762 Y138.460 E0.24305 ; perimeter
G1 X84.762 Y140.555 E0.08630 ; perimeter
G1 X84.175 Y141.143 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.802 Y140.960 F10800.000 ; move inwards before travel
G1 X83.743 Y140.278 ; move to first infill point
G1 F7168.6
G1 X83.035 Y139.569 E0.05230 ; infill
G1 X82.324 Y139.569 E0.03707 ; infill
G1 X82.832 Y140.077 E0.03747 ; infill
G1 X82.122 Y140.077 E0.03707 ; infill
G1 X81.614 Y139.569 E0.03747 ; infill
G1 X80.904 Y139.569 E0.03707 ; infill
G1 X81.412 Y140.077 E0.03747 ; infill
G1 X80.701 Y140.077 E0.03707 ; infill
G1 X80.194 Y139.569 E0.03747 ; infill
G1 X79.971 Y139.569 E0.01163 ; infill
G1 X79.971 Y140.057 E0.02544 ; infill
G1 X80.192 Y140.278 E0.01631 ; infill
G1 F8640
G1 X79.971 Y140.057 E-0.07217 ; wipe and retract
G1 X79.971 Y139.569 E-0.11255 ; wipe and retract
G1 X80.194 Y139.569 E-0.05143 ; wipe and retract
G1 X80.701 Y140.077 E-0.16576 ; wipe and retract
G1 X81.412 Y140.077 E-0.16399 ; wipe and retract
G1 X80.904 Y139.569 E-0.16576 ; wipe and retract
G1 X81.027 Y139.569 E-0.02834 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X77.121 Y126.205 E0.06359 ; perimeter
G1 X77.465 Y125.795 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.06359 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X84.141 Y117.838 E0.06359 ; perimeter
G1 X84.486 Y117.428 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.06359 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X76.563 Y126.254 E0.06359 ; perimeter
G1 X77.416 Y125.236 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.06359 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X83.583 Y117.887 E0.06359 ; perimeter
G1 X84.437 Y116.870 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.06359 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X98.702 Y114.365 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y114.115 E0.04806 ; perimeter
G1 X97.562 Y113.605 E0.02100 ; perimeter
G1 X98.702 Y113.845 E0.04797 ; perimeter
G1 X98.702 Y114.305 E0.01895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y114.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.166 Y114.434 E0.08142 ; perimeter
G1 X97.166 Y113.105 E0.05475 ; perimeter
G1 X99.098 Y113.522 E0.08144 ; perimeter
G1 X99.098 Y114.789 E0.05217 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y115.329 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.703 Y115.176 E0.03321 ; perimeter
G1 X96.769 Y114.753 E0.08153 ; perimeter
G1 X96.769 Y112.605 E0.08849 ; perimeter
G1 X97.825 Y112.853 E0.04467 ; perimeter
G1 X99.494 Y113.200 E0.07024 ; perimeter
G1 X99.494 Y115.269 E0.08523 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.135 Y115.154 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.703 Y115.176 E-0.18405 ; wipe and retract
G1 X96.769 Y114.753 E-0.45698 ; wipe and retract
G1 X96.769 Y114.238 E-0.11896 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X89.489 Y114.699 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.15587 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X62.185 Y96.099 E1.03621 ; perimeter
G1 X61.825 Y95.838 E0.01834 ; perimeter
G1 X61.412 Y95.622 E0.01917 ; perimeter
G1 X60.976 Y95.471 E0.01903 ; perimeter
G1 X60.526 Y95.390 E0.01884 ; perimeter
G1 X60.069 Y95.385 E0.01882 ; perimeter
G1 X59.603 Y95.469 E0.01951 ; perimeter
G1 X59.213 Y95.613 E0.01710 ; perimeter
G1 X58.999 Y95.747 E0.01039 ; perimeter
G1 X58.442 Y95.278 E0.03000 ; perimeter
G1 X58.686 Y95.099 E0.01250 ; perimeter
G1 X58.996 Y94.938 E0.01439 ; perimeter
G1 X59.340 Y94.820 E0.01500 ; perimeter
G1 X59.695 Y94.752 E0.01485 ; perimeter
G1 X60.113 Y94.730 E0.01728 ; perimeter
G1 X60.495 Y94.759 E0.01576 ; perimeter
G1 X60.913 Y94.841 E0.01756 ; perimeter
G1 X61.328 Y94.974 E0.01795 ; perimeter
G1 X61.799 Y95.193 E0.02142 ; perimeter
G1 X62.138 Y95.395 E0.01624 ; perimeter
G1 X62.525 Y95.685 E0.01991 ; perimeter
G1 X81.649 Y111.732 E1.02841 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X89.833 Y114.289 E0.16390 ; perimeter
G1 X89.528 Y114.653 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.538 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.16626 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X61.941 Y96.412 E1.04157 ; perimeter
G1 X61.616 Y96.176 E0.01657 ; perimeter
G1 X61.255 Y95.987 E0.01678 ; perimeter
G1 X60.875 Y95.856 E0.01654 ; perimeter
G1 X60.488 Y95.786 E0.01621 ; perimeter
G1 X60.102 Y95.782 E0.01590 ; perimeter
G1 X59.708 Y95.853 E0.01651 ; perimeter
G1 X59.389 Y95.971 E0.01401 ; perimeter
G1 X59.082 Y96.162 E0.01489 ; perimeter
G1 X58.987 Y96.254 E0.00544 ; perimeter
G1 X57.855 Y95.303 E0.06089 ; perimeter
G1 X58.153 Y94.999 E0.01755 ; perimeter
G1 X58.476 Y94.761 E0.01654 ; perimeter
G1 X58.840 Y94.572 E0.01688 ; perimeter
G1 X59.239 Y94.436 E0.01737 ; perimeter
G1 X59.647 Y94.358 E0.01711 ; perimeter
G1 X60.118 Y94.333 E0.01944 ; perimeter
G1 X60.548 Y94.365 E0.01778 ; perimeter
G1 X61.012 Y94.456 E0.01948 ; perimeter
G1 X61.473 Y94.604 E0.01993 ; perimeter
G1 X61.985 Y94.843 E0.02326 ; perimeter
G1 X62.359 Y95.065 E0.01795 ; perimeter
G1 X62.771 Y95.375 E0.02123 ; perimeter
G1 X81.793 Y111.335 E1.02292 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X90.392 Y114.240 E0.18617 ; perimeter
G1 X89.577 Y115.212 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.257 Y114.972 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.024 Y113.134 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X53.903 Y106.723 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X51.410 Y104.631 E0.13405 ; perimeter
G1 X48.961 Y107.550 E0.15696 ; perimeter
G1 X48.454 Y107.124 E0.02729 ; perimeter
G1 X57.451 Y96.401 E0.57663 ; perimeter
G1 X57.959 Y96.827 E0.02729 ; perimeter
G1 X55.510 Y99.746 E0.15696 ; perimeter
G1 X58.002 Y101.837 E0.13405 ; perimeter
G1 X57.658 Y102.247 E0.02205 ; perimeter
G1 X55.166 Y100.156 E0.13405 ; perimeter
G1 X51.754 Y104.221 E0.21861 ; perimeter
G1 X54.247 Y106.313 E0.13405 ; perimeter
G1 X53.942 Y106.677 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.952 Y107.281 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X51.459 Y105.189 E0.13405 ; perimeter
G1 X49.010 Y108.108 E0.15696 ; perimeter
G1 X47.895 Y107.173 E0.05995 ; perimeter
G1 X57.402 Y95.843 E0.60929 ; perimeter
G1 X58.517 Y96.778 E0.05995 ; perimeter
G1 X56.068 Y99.697 E0.15696 ; perimeter
G1 X58.561 Y101.788 E0.13405 ; perimeter
G1 X57.707 Y102.806 E0.05471 ; perimeter
G1 X55.214 Y100.714 E0.13405 ; perimeter
G1 X52.313 Y104.172 E0.18596 ; perimeter
G1 X54.806 Y106.264 E0.13405 ; perimeter
G1 X53.990 Y107.235 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.681 Y106.987 F10800.000 ; move inwards before travel
G1 F8640
G1 X51.459 Y105.189 E-0.75149 ; wipe and retract
G1 X51.435 Y105.218 E-0.00851 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X76.426 Y137.890 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.487 Y113.607 E1.55627 ; perimeter
G1 X47.134 Y113.277 E0.01988 ; perimeter
G1 X46.835 Y112.928 E0.01896 ; perimeter
G1 X46.580 Y112.555 E0.01859 ; perimeter
G1 X46.375 Y112.166 E0.01810 ; perimeter
G1 X46.222 Y111.769 E0.01756 ; perimeter
G1 X46.127 Y111.397 E0.01581 ; perimeter
G1 X46.078 Y111.000 E0.01647 ; perimeter
G1 X46.082 Y110.620 E0.01565 ; perimeter
G1 X46.138 Y110.261 E0.01497 ; perimeter
G1 X46.243 Y109.928 E0.01439 ; perimeter
G1 X46.393 Y109.624 E0.01397 ; perimeter
G1 X46.601 Y109.332 E0.01478 ; perimeter
G1 X47.492 Y108.270 E0.05709 ; perimeter
G1 X47.999 Y108.696 E0.02729 ; perimeter
G1 X47.235 Y109.608 E0.04901 ; perimeter
G1 X47.006 Y109.947 E0.01685 ; perimeter
G1 X46.841 Y110.358 E0.01826 ; perimeter
G1 X46.761 Y110.796 E0.01834 ; perimeter
G1 X46.765 Y111.244 E0.01847 ; perimeter
G1 X46.849 Y111.689 E0.01864 ; perimeter
G1 X47.007 Y112.118 E0.01884 ; perimeter
G1 X47.231 Y112.522 E0.01903 ; perimeter
G1 X47.516 Y112.891 E0.01917 ; perimeter
G1 X47.835 Y113.201 E0.01834 ; perimeter
G1 X76.770 Y137.480 E1.55604 ; perimeter
G1 X76.465 Y137.844 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.475 Y138.448 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X47.224 Y113.904 E1.57305 ; perimeter
G1 X46.848 Y113.552 E0.02122 ; perimeter
G1 X46.520 Y113.169 E0.02075 ; perimeter
G1 X46.240 Y112.760 E0.02042 ; perimeter
G1 X46.014 Y112.331 E0.01998 ; perimeter
G1 X45.844 Y111.889 E0.01948 ; perimeter
G1 X45.737 Y111.471 E0.01780 ; perimeter
G1 X45.681 Y111.023 E0.01860 ; perimeter
G1 X45.686 Y110.587 E0.01794 ; perimeter
G1 X45.751 Y110.171 E0.01736 ; perimeter
G1 X45.874 Y109.780 E0.01688 ; perimeter
G1 X46.052 Y109.420 E0.01654 ; perimeter
G1 X46.287 Y109.089 E0.01673 ; perimeter
G1 X47.443 Y107.712 E0.07407 ; perimeter
G1 X48.558 Y108.647 E0.05995 ; perimeter
G1 X47.552 Y109.846 E0.06447 ; perimeter
G1 X47.359 Y110.133 E0.01426 ; perimeter
G1 X47.224 Y110.469 E0.01489 ; perimeter
G1 X47.158 Y110.830 E0.01513 ; perimeter
G1 X47.161 Y111.206 E0.01546 ; perimeter
G1 X47.233 Y111.583 E0.01584 ; perimeter
G1 X47.368 Y111.953 E0.01621 ; perimeter
G1 X47.563 Y112.304 E0.01654 ; perimeter
G1 X47.812 Y112.626 E0.01678 ; perimeter
G1 X48.101 Y112.906 E0.01657 ; perimeter
G1 X77.329 Y137.431 E1.57178 ; perimeter
G1 X76.513 Y138.402 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.171 Y138.188 F10800.000 ; move inwards before travel
G1 F8640
G1 X73.989 Y136.291 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X150.728 Y114.365 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y113.845 E0.02142 ; perimeter
G1 X151.868 Y113.605 E0.04797 ; perimeter
G1 X151.868 Y114.115 E0.02100 ; perimeter
G1 X150.787 Y114.352 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y114.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.332 Y113.522 E0.05465 ; perimeter
G1 X152.264 Y113.105 E0.08144 ; perimeter
G1 X152.264 Y114.434 E0.05475 ; perimeter
G1 X150.390 Y114.837 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y115.329 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.935 Y113.200 E0.08770 ; perimeter
G1 X151.605 Y112.853 E0.07024 ; perimeter
G1 X152.660 Y112.604 E0.04467 ; perimeter
G1 X152.660 Y114.753 E0.08850 ; perimeter
G1 X150.727 Y115.176 E0.08153 ; perimeter
G1 X149.994 Y115.317 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.111 Y114.969 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.935 Y113.200 E-0.48912 ; wipe and retract
G1 X151.084 Y112.961 E-0.27088 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X164.944 Y117.428 E0.06359 ; perimeter
G1 X165.288 Y117.838 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.06359 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X171.965 Y125.795 E0.06359 ; perimeter
G1 X172.309 Y126.205 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.06359 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X164.993 Y116.870 E0.06359 ; perimeter
G1 X165.847 Y117.887 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.06359 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X172.014 Y125.236 E0.06359 ; perimeter
G1 X172.867 Y126.254 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.06359 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y139.253 E0.04011 ; perimeter
G1 X169.775 Y139.253 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.04011 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.462 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.857 E0.06321 ; perimeter
G1 X170.171 Y138.857 E0.21040 ; perimeter
G1 X170.171 Y140.391 E0.06321 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.522 Y140.789 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.298 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y138.460 E0.08630 ; perimeter
G1 X170.567 Y138.460 E0.24306 ; perimeter
G1 X170.567 Y140.555 E0.08630 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.358 Y141.185 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.282 Y140.786 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.667 Y140.555 E-0.21581 ; wipe and retract
G1 X164.667 Y138.460 E-0.48370 ; wipe and retract
G1 X164.929 Y138.460 E-0.06050 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X165.997 Y140.278 ; move to first infill point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.6
G1 X165.776 Y140.057 E0.01632 ; infill
G1 X165.776 Y139.569 E0.02544 ; infill
G1 X165.999 Y139.569 E0.01163 ; infill
G1 X166.506 Y140.077 E0.03747 ; infill
G1 X167.217 Y140.077 E0.03707 ; infill
G1 X166.709 Y139.569 E0.03747 ; infill
G1 X167.419 Y139.569 E0.03707 ; infill
G1 X167.927 Y140.077 E0.03747 ; infill
G1 X168.637 Y140.077 E0.03707 ; infill
G1 X168.129 Y139.569 E0.03747 ; infill
G1 X168.840 Y139.569 E0.03707 ; infill
G1 X169.548 Y140.278 E0.05230 ; infill
G1 F8640
G1 X168.840 Y139.569 E-0.23134 ; wipe and retract
G1 X168.129 Y139.569 E-0.16399 ; wipe and retract
G1 X168.637 Y140.077 E-0.16576 ; wipe and retract
G1 X167.927 Y140.077 E-0.16399 ; wipe and retract
G1 X167.820 Y139.970 E-0.03492 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X173.004 Y137.890 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X172.660 Y137.480 E0.02205 ; perimeter
G1 X201.594 Y113.201 E1.55604 ; perimeter
G1 X201.914 Y112.891 E0.01834 ; perimeter
G1 X202.198 Y112.522 E0.01917 ; perimeter
G1 X202.423 Y112.118 E0.01903 ; perimeter
G1 X202.582 Y111.685 E0.01903 ; perimeter
G1 X202.665 Y111.209 E0.01990 ; perimeter
G1 X202.668 Y110.796 E0.01701 ; perimeter
G1 X202.588 Y110.358 E0.01834 ; perimeter
G1 X202.423 Y109.947 E0.01826 ; perimeter
G1 X202.195 Y109.608 E0.01685 ; perimeter
G1 X201.430 Y108.696 E0.04901 ; perimeter
G1 X201.938 Y108.270 E0.02729 ; perimeter
G1 X202.819 Y109.321 E0.05648 ; perimeter
G1 X203.037 Y109.625 E0.01542 ; perimeter
G1 X203.187 Y109.928 E0.01393 ; perimeter
G1 X203.292 Y110.262 E0.01441 ; perimeter
G1 X203.346 Y110.607 E0.01438 ; perimeter
G1 X203.352 Y111.001 E0.01625 ; perimeter
G1 X203.302 Y111.397 E0.01643 ; perimeter
G1 X203.208 Y111.769 E0.01581 ; perimeter
G1 X203.055 Y112.164 E0.01744 ; perimeter
G1 X202.820 Y112.600 E0.02041 ; perimeter
G1 X202.595 Y112.927 E0.01635 ; perimeter
G1 X202.295 Y113.277 E0.01899 ; perimeter
G1 X201.943 Y113.607 E0.01989 ; perimeter
G1 X173.050 Y137.851 E1.55380 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.955 Y138.448 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X172.101 Y137.431 E0.05471 ; perimeter
G1 X201.329 Y112.906 E1.57178 ; perimeter
G1 X201.618 Y112.626 E0.01657 ; perimeter
G1 X201.866 Y112.304 E0.01678 ; perimeter
G1 X202.061 Y111.953 E0.01654 ; perimeter
G1 X202.198 Y111.582 E0.01628 ; perimeter
G1 X202.269 Y111.173 E0.01709 ; perimeter
G1 X202.272 Y110.830 E0.01412 ; perimeter
G1 X202.206 Y110.469 E0.01513 ; perimeter
G1 X202.071 Y110.133 E0.01489 ; perimeter
G1 X201.878 Y109.846 E0.01426 ; perimeter
G1 X200.872 Y108.647 E0.06447 ; perimeter
G1 X201.987 Y107.712 E0.05995 ; perimeter
G1 X203.133 Y109.078 E0.07344 ; perimeter
G1 X203.378 Y109.420 E0.01737 ; perimeter
G1 X203.556 Y109.780 E0.01652 ; perimeter
G1 X203.679 Y110.171 E0.01689 ; perimeter
G1 X203.742 Y110.573 E0.01676 ; perimeter
G1 X203.749 Y111.023 E0.01855 ; perimeter
G1 X203.692 Y111.471 E0.01859 ; perimeter
G1 X203.586 Y111.889 E0.01780 ; perimeter
G1 X203.416 Y112.330 E0.01944 ; perimeter
G1 X203.159 Y112.807 E0.02232 ; perimeter
G1 X202.910 Y113.169 E0.01811 ; perimeter
G1 X202.582 Y113.552 E0.02077 ; perimeter
G1 X202.206 Y113.904 E0.02122 ; perimeter
G1 X173.001 Y138.410 E1.57057 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.885 Y138.054 F10800.000 ; move inwards before travel
G1 F8640
G1 X172.101 Y137.431 E-0.30695 ; wipe and retract
G1 X173.604 Y136.170 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X195.527 Y106.723 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X195.182 Y106.313 E0.02205 ; perimeter
G1 X197.675 Y104.221 E0.13405 ; perimeter
G1 X194.264 Y100.156 E0.21861 ; perimeter
G1 X191.771 Y102.247 E0.13405 ; perimeter
G1 X191.427 Y101.837 E0.02205 ; perimeter
G1 X193.920 Y99.746 E0.13405 ; perimeter
G1 X191.471 Y96.827 E0.15696 ; perimeter
G1 X191.979 Y96.401 E0.02729 ; perimeter
G1 X200.976 Y107.124 E0.57663 ; perimeter
G1 X200.468 Y107.550 E0.02730 ; perimeter
G1 X198.019 Y104.631 E0.15696 ; perimeter
G1 X195.573 Y106.684 E0.13158 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.478 Y107.281 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X194.624 Y106.264 E0.05471 ; perimeter
G1 X197.117 Y104.172 E0.13405 ; perimeter
G1 X194.215 Y100.714 E0.18596 ; perimeter
G1 X191.723 Y102.806 E0.13405 ; perimeter
G1 X190.869 Y101.788 E0.05471 ; perimeter
G1 X193.362 Y99.697 E0.13405 ; perimeter
G1 X190.913 Y96.778 E0.15696 ; perimeter
G1 X192.027 Y95.843 E0.05995 ; perimeter
G1 X201.534 Y107.173 E0.60929 ; perimeter
G1 X200.419 Y108.108 E0.05995 ; perimeter
G1 X197.970 Y105.189 E0.15696 ; perimeter
G1 X195.524 Y107.242 E0.13158 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.523 Y106.884 F10800.000 ; move inwards before travel
G1 F8640
G1 X194.624 Y106.264 E-0.30695 ; wipe and retract
G1 X196.127 Y105.003 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
G1 X159.940 Y114.699 ; move to first perimeter point
G1 Z19.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.596 Y114.289 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.16390 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X186.905 Y95.685 E1.02841 ; perimeter
G1 X187.291 Y95.395 E0.01991 ; perimeter
G1 X187.630 Y95.193 E0.01624 ; perimeter
G1 X188.101 Y94.974 E0.02142 ; perimeter
G1 X188.516 Y94.841 E0.01795 ; perimeter
G1 X188.933 Y94.759 E0.01751 ; perimeter
G1 X189.343 Y94.730 E0.01689 ; perimeter
G1 X189.714 Y94.750 E0.01534 ; perimeter
G1 X190.103 Y94.824 E0.01630 ; perimeter
G1 X190.433 Y94.938 E0.01439 ; perimeter
G1 X190.744 Y95.099 E0.01441 ; perimeter
G1 X190.988 Y95.278 E0.01250 ; perimeter
G1 X190.430 Y95.747 E0.03000 ; perimeter
G1 X190.216 Y95.613 E0.01038 ; perimeter
G1 X189.799 Y95.459 E0.01834 ; perimeter
G1 X189.357 Y95.385 E0.01847 ; perimeter
G1 X188.904 Y95.390 E0.01864 ; perimeter
G1 X188.454 Y95.471 E0.01884 ; perimeter
G1 X188.017 Y95.622 E0.01903 ; perimeter
G1 X187.605 Y95.838 E0.01916 ; perimeter
G1 X187.257 Y96.089 E0.01769 ; perimeter
G1 X167.976 Y112.267 E1.03687 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.986 Y114.661 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.892 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.038 Y114.240 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.18617 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X186.658 Y95.375 E1.02292 ; perimeter
G1 X187.070 Y95.065 E0.02123 ; perimeter
G1 X187.445 Y94.843 E0.01795 ; perimeter
G1 X187.957 Y94.604 E0.02326 ; perimeter
G1 X188.417 Y94.456 E0.01993 ; perimeter
G1 X188.881 Y94.365 E0.01947 ; perimeter
G1 X189.339 Y94.333 E0.01891 ; perimeter
G1 X189.762 Y94.355 E0.01747 ; perimeter
G1 X190.205 Y94.440 E0.01857 ; perimeter
G1 X190.590 Y94.572 E0.01676 ; perimeter
G1 X190.954 Y94.761 E0.01689 ; perimeter
G1 X191.277 Y94.999 E0.01654 ; perimeter
G1 X191.575 Y95.303 E0.01755 ; perimeter
G1 X190.443 Y96.254 E0.06089 ; perimeter
G1 X190.348 Y96.162 E0.00544 ; perimeter
G1 X190.041 Y95.971 E0.01489 ; perimeter
G1 X189.696 Y95.843 E0.01513 ; perimeter
G1 X189.326 Y95.782 E0.01546 ; perimeter
G1 X188.942 Y95.786 E0.01584 ; perimeter
G1 X188.554 Y95.856 E0.01621 ; perimeter
G1 X188.175 Y95.987 E0.01654 ; perimeter
G1 X187.814 Y96.176 E0.01677 ; perimeter
G1 X187.501 Y96.402 E0.01592 ; perimeter
G1 X168.120 Y112.663 E1.04222 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X159.938 Y115.219 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.874 Y114.858 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;19.5


G1 F8640
G1 X159.038 Y114.240 E-0.30695 ; wipe and retract
G1 X160.541 Y112.979 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z19.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;19.5
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y101.107 E0.04011 ; perimeter
G1 X84.255 Y101.107 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.04011 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.253 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.711 E0.06321 ; perimeter
G1 X84.651 Y100.711 E0.21040 ; perimeter
G1 X84.651 Y102.245 E0.06321 ; perimeter
G1 X84.296 Y102.600 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.417 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y100.314 E0.08630 ; perimeter
G1 X85.047 Y100.314 E0.24305 ; perimeter
G1 X85.047 Y102.409 E0.08630 ; perimeter
G1 X84.460 Y102.997 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.087 Y102.814 F10800.000 ; move inwards before travel
G1 F8640
G1 X81.168 Y103.027 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X83.718 Y102.131 ; move to first infill point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.6
G1 X83.939 Y101.910 E0.01632 ; infill
G1 X83.939 Y101.423 E0.02544 ; infill
G1 X83.716 Y101.423 E0.01163 ; infill
G1 X83.208 Y101.931 E0.03747 ; infill
G1 X82.498 Y101.931 E0.03707 ; infill
G1 X83.006 Y101.423 E0.03747 ; infill
G1 X82.295 Y101.423 E0.03707 ; infill
G1 X81.788 Y101.931 E0.03747 ; infill
G1 X81.078 Y101.931 E0.03707 ; infill
G1 X81.585 Y101.423 E0.03747 ; infill
G1 X80.875 Y101.423 E0.03707 ; infill
G1 X80.167 Y102.131 E0.05230 ; infill
G1 F8640
G1 X80.875 Y101.423 E-0.23134 ; wipe and retract
G1 X81.585 Y101.423 E-0.16399 ; wipe and retract
G1 X81.078 Y101.931 E-0.16576 ; wipe and retract
G1 X81.788 Y101.931 E-0.16399 ; wipe and retract
G1 X81.895 Y101.824 E-0.03492 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X77.468 Y88.111 E0.06025 ; perimeter
G1 X77.812 Y87.701 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.06025 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X84.489 Y79.744 E0.06025 ; perimeter
G1 X84.833 Y79.334 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.06025 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X76.910 Y88.160 E0.06025 ; perimeter
G1 X77.764 Y87.142 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.06025 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X83.930 Y79.793 E0.06025 ; perimeter
G1 X84.784 Y78.776 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.06025 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X98.987 Y76.219 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y75.969 E0.04806 ; perimeter
G1 X97.847 Y75.459 E0.02098 ; perimeter
G1 X98.987 Y75.698 E0.04797 ; perimeter
G1 X98.987 Y76.159 E0.01895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y76.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.451 Y76.288 E0.08142 ; perimeter
G1 X97.451 Y74.959 E0.05474 ; perimeter
G1 X99.383 Y75.376 E0.08144 ; perimeter
G1 X99.383 Y76.643 E0.05218 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y77.183 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.988 Y77.030 E0.03321 ; perimeter
G1 X97.055 Y76.607 E0.08153 ; perimeter
G1 X97.055 Y74.459 E0.08849 ; perimeter
G1 X98.083 Y74.701 E0.04353 ; perimeter
G1 X99.780 Y75.054 E0.07139 ; perimeter
G1 X99.780 Y77.123 E0.08523 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.420 Y77.008 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.988 Y77.030 E-0.18405 ; wipe and retract
G1 X97.055 Y76.607 E-0.45698 ; wipe and retract
G1 X97.055 Y76.091 E-0.11896 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X89.774 Y76.553 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.15587 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X62.336 Y57.840 E1.04342 ; perimeter
G1 X61.976 Y57.579 E0.01834 ; perimeter
G1 X61.563 Y57.363 E0.01917 ; perimeter
G1 X61.127 Y57.212 E0.01903 ; perimeter
G1 X60.677 Y57.132 E0.01884 ; perimeter
G1 X60.224 Y57.126 E0.01864 ; perimeter
G1 X59.782 Y57.200 E0.01847 ; perimeter
G1 X59.365 Y57.355 E0.01834 ; perimeter
G1 X59.151 Y57.488 E0.01039 ; perimeter
G1 X58.665 Y57.081 E0.02609 ; perimeter
G1 X58.927 Y56.871 E0.01380 ; perimeter
G1 X59.220 Y56.693 E0.01414 ; perimeter
G1 X59.567 Y56.547 E0.01549 ; perimeter
G1 X59.859 Y56.492 E0.01224 ; perimeter
G1 X60.255 Y56.471 E0.01634 ; perimeter
G1 X60.670 Y56.503 E0.01714 ; perimeter
G1 X61.069 Y56.583 E0.01677 ; perimeter
G1 X61.484 Y56.717 E0.01797 ; perimeter
G1 X61.937 Y56.927 E0.02056 ; perimeter
G1 X62.291 Y57.137 E0.01697 ; perimeter
G1 X62.676 Y57.426 E0.01984 ; perimeter
G1 X81.934 Y73.586 E1.03563 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.118 Y76.143 E0.16390 ; perimeter
G1 X89.813 Y76.507 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.823 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.16626 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X62.092 Y58.153 E1.04878 ; perimeter
G1 X61.767 Y57.917 E0.01657 ; perimeter
G1 X61.406 Y57.728 E0.01678 ; perimeter
G1 X61.026 Y57.597 E0.01654 ; perimeter
G1 X60.639 Y57.527 E0.01621 ; perimeter
G1 X60.255 Y57.523 E0.01584 ; perimeter
G1 X59.884 Y57.585 E0.01546 ; perimeter
G1 X59.540 Y57.712 E0.01513 ; perimeter
G1 X59.233 Y57.903 E0.01489 ; perimeter
G1 X59.138 Y57.995 E0.00544 ; perimeter
G1 X58.093 Y57.118 E0.05618 ; perimeter
G1 X58.391 Y56.793 E0.01816 ; perimeter
G1 X58.699 Y56.546 E0.01628 ; perimeter
G1 X59.040 Y56.340 E0.01640 ; perimeter
G1 X59.451 Y56.166 E0.01841 ; perimeter
G1 X59.811 Y56.097 E0.01508 ; perimeter
G1 X60.260 Y56.074 E0.01851 ; perimeter
G1 X60.724 Y56.110 E0.01918 ; perimeter
G1 X61.169 Y56.199 E0.01869 ; perimeter
G1 X61.629 Y56.347 E0.01990 ; perimeter
G1 X62.122 Y56.576 E0.02239 ; perimeter
G1 X62.512 Y56.807 E0.01869 ; perimeter
G1 X62.923 Y57.116 E0.02116 ; perimeter
G1 X82.078 Y73.189 E1.03013 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X90.677 Y76.094 E0.18617 ; perimeter
G1 X89.862 Y77.065 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.543 Y76.826 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.309 Y74.987 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X54.049 Y68.460 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X51.561 Y66.372 E0.13378 ; perimeter
G1 X49.112 Y69.291 E0.15696 ; perimeter
G1 X48.685 Y68.932 E0.02299 ; perimeter
G1 X57.682 Y58.210 E0.57663 ; perimeter
G1 X58.110 Y58.568 E0.02299 ; perimeter
G1 X55.661 Y61.487 E0.15696 ; perimeter
G1 X58.148 Y63.574 E0.13378 ; perimeter
G1 X57.804 Y63.984 E0.02205 ; perimeter
G1 X55.317 Y61.897 E0.13378 ; perimeter
G1 X51.906 Y65.962 E0.21861 ; perimeter
G1 X54.393 Y68.050 E0.13378 ; perimeter
G1 X54.088 Y68.414 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X54.098 Y69.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X51.610 Y66.931 E0.13378 ; perimeter
G1 X49.161 Y69.849 E0.15696 ; perimeter
G1 X48.127 Y68.981 E0.05564 ; perimeter
G1 X57.633 Y57.651 E0.60929 ; perimeter
G1 X58.668 Y58.520 E0.05564 ; perimeter
G1 X56.219 Y61.438 E0.15696 ; perimeter
G1 X58.707 Y63.526 E0.13378 ; perimeter
G1 X57.853 Y64.543 E0.05471 ; perimeter
G1 X55.365 Y62.455 E0.13378 ; perimeter
G1 X52.464 Y65.913 E0.18596 ; perimeter
G1 X54.952 Y68.001 E0.13378 ; perimeter
G1 X54.137 Y68.972 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.827 Y68.724 F10800.000 ; move inwards before travel
G1 F8640
G1 X51.610 Y66.931 E-0.74997 ; wipe and retract
G1 X51.582 Y66.964 E-0.01003 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X76.520 Y99.583 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.638 Y75.348 E1.55319 ; perimeter
M73 P86 R18
G1 X47.286 Y75.019 E0.01982 ; perimeter
G1 X46.987 Y74.671 E0.01890 ; perimeter
G1 X46.734 Y74.300 E0.01854 ; perimeter
G1 X46.529 Y73.912 E0.01806 ; perimeter
G1 X46.375 Y73.517 E0.01747 ; perimeter
G1 X46.275 Y73.121 E0.01682 ; perimeter
G1 X46.228 Y72.736 E0.01598 ; perimeter
G1 X46.237 Y72.393 E0.01415 ; perimeter
G1 X46.316 Y72.072 E0.01360 ; perimeter
G1 X46.441 Y71.752 E0.01416 ; perimeter
G1 X46.609 Y71.444 E0.01447 ; perimeter
G1 X46.829 Y71.144 E0.01532 ; perimeter
G1 X47.723 Y70.079 E0.05727 ; perimeter
G1 X48.150 Y70.437 E0.02299 ; perimeter
G1 X47.386 Y71.349 E0.04901 ; perimeter
G1 X47.157 Y71.688 E0.01685 ; perimeter
G1 X46.992 Y72.100 E0.01826 ; perimeter
G1 X46.912 Y72.537 E0.01834 ; perimeter
G1 X46.916 Y72.986 E0.01847 ; perimeter
G1 X47.000 Y73.430 E0.01864 ; perimeter
G1 X47.158 Y73.860 E0.01884 ; perimeter
G1 X47.383 Y74.263 E0.01903 ; perimeter
G1 X47.667 Y74.632 E0.01917 ; perimeter
G1 X47.986 Y74.942 E0.01834 ; perimeter
G1 X76.864 Y99.173 E1.55295 ; perimeter
G1 X76.558 Y99.537 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.569 Y100.141 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X47.375 Y75.645 E1.56996 ; perimeter
G1 X47.000 Y75.294 E0.02116 ; perimeter
G1 X46.673 Y74.913 E0.02069 ; perimeter
G1 X46.394 Y74.505 E0.02036 ; perimeter
G1 X46.167 Y74.077 E0.01993 ; perimeter
G1 X45.997 Y73.638 E0.01942 ; perimeter
G1 X45.885 Y73.194 E0.01886 ; perimeter
G1 X45.831 Y72.755 E0.01821 ; perimeter
G1 X45.842 Y72.340 E0.01712 ; perimeter
G1 X45.937 Y71.952 E0.01642 ; perimeter
G1 X46.081 Y71.584 E0.01628 ; perimeter
G1 X46.274 Y71.230 E0.01661 ; perimeter
G1 X46.517 Y70.899 E0.01693 ; perimeter
G1 X47.674 Y69.520 E0.07414 ; perimeter
G1 X48.709 Y70.389 E0.05564 ; perimeter
G1 X47.703 Y71.587 E0.06447 ; perimeter
G1 X47.510 Y71.875 E0.01426 ; perimeter
G1 X47.375 Y72.210 E0.01489 ; perimeter
G1 X47.309 Y72.572 E0.01513 ; perimeter
G1 X47.312 Y72.947 E0.01546 ; perimeter
G1 X47.384 Y73.325 E0.01584 ; perimeter
G1 X47.519 Y73.694 E0.01621 ; perimeter
G1 X47.714 Y74.045 E0.01654 ; perimeter
G1 X47.963 Y74.367 E0.01678 ; perimeter
G1 X48.252 Y74.647 E0.01657 ; perimeter
G1 X77.422 Y99.124 E1.56870 ; perimeter
G1 X76.607 Y100.095 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.265 Y99.881 F10800.000 ; move inwards before travel
G1 F8640
G1 X74.082 Y97.984 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X151.013 Y76.219 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y75.698 E0.02143 ; perimeter
G1 X152.153 Y75.459 E0.04797 ; perimeter
G1 X152.153 Y75.969 E0.02098 ; perimeter
G1 X151.072 Y76.206 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y76.703 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.617 Y75.376 E0.05465 ; perimeter
G1 X152.549 Y74.959 E0.08144 ; perimeter
G1 X152.549 Y76.288 E0.05474 ; perimeter
G1 X150.676 Y76.691 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y77.183 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.220 Y75.054 E0.08770 ; perimeter
G1 X151.917 Y74.701 E0.07139 ; perimeter
G1 X152.945 Y74.458 E0.04353 ; perimeter
G1 X152.945 Y76.607 E0.08850 ; perimeter
G1 X151.012 Y77.030 E0.08153 ; perimeter
G1 X150.279 Y77.171 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.396 Y76.823 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.220 Y75.054 E-0.48913 ; wipe and retract
G1 X151.369 Y74.815 E-0.27087 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X165.167 Y79.334 E0.06025 ; perimeter
G1 X165.511 Y79.744 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.06025 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X172.188 Y87.701 E0.06025 ; perimeter
G1 X172.532 Y88.111 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.06025 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
M73 Q86 S19
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X165.216 Y78.776 E0.06025 ; perimeter
G1 X166.070 Y79.793 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.06025 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X172.236 Y87.142 E0.06025 ; perimeter
G1 X173.090 Y88.160 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.06025 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y101.107 E0.04011 ; perimeter
G1 X170.060 Y101.107 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.04011 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.747 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.711 E0.06321 ; perimeter
G1 X170.456 Y100.711 E0.21040 ; perimeter
G1 X170.456 Y102.245 E0.06321 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.807 Y102.643 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.583 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y100.314 E0.08630 ; perimeter
G1 X170.853 Y100.314 E0.24306 ; perimeter
G1 X170.853 Y102.409 E0.08630 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.643 Y103.039 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.567 Y102.640 F10800.000 ; move inwards before travel
G1 X165.972 Y102.131 ; move to first infill point
G1 F7168.6
G1 X166.680 Y101.423 E0.05230 ; infill
G1 X167.390 Y101.423 E0.03707 ; infill
G1 X166.883 Y101.931 E0.03747 ; infill
G1 X167.593 Y101.931 E0.03707 ; infill
G1 X168.101 Y101.423 E0.03747 ; infill
G1 X168.811 Y101.423 E0.03707 ; infill
G1 X168.303 Y101.931 E0.03747 ; infill
G1 X169.013 Y101.931 E0.03707 ; infill
G1 X169.521 Y101.423 E0.03747 ; infill
G1 X169.744 Y101.423 E0.01163 ; infill
G1 X169.744 Y101.910 E0.02544 ; infill
G1 X169.523 Y102.131 E0.01633 ; infill
G1 F8640
G1 X169.744 Y101.910 E-0.07222 ; wipe and retract
G1 X169.744 Y101.423 E-0.11252 ; wipe and retract
G1 X169.521 Y101.423 E-0.05147 ; wipe and retract
G1 X169.013 Y101.931 E-0.16576 ; wipe and retract
G1 X168.303 Y101.931 E-0.16399 ; wipe and retract
G1 X168.811 Y101.423 E-0.16576 ; wipe and retract
G1 X168.688 Y101.423 E-0.02829 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X173.480 Y99.583 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X173.136 Y99.173 E0.02205 ; perimeter
G1 X202.014 Y74.942 E1.55295 ; perimeter
G1 X202.333 Y74.632 E0.01834 ; perimeter
G1 X202.617 Y74.263 E0.01917 ; perimeter
G1 X202.842 Y73.860 E0.01903 ; perimeter
G1 X203.000 Y73.429 E0.01892 ; perimeter
G1 X203.084 Y72.972 E0.01914 ; perimeter
G1 X203.088 Y72.537 E0.01789 ; perimeter
G1 X203.008 Y72.100 E0.01834 ; perimeter
G1 X202.843 Y71.688 E0.01826 ; perimeter
G1 X202.614 Y71.349 E0.01685 ; perimeter
G1 X201.850 Y70.437 E0.04901 ; perimeter
G1 X202.277 Y70.079 E0.02299 ; perimeter
G1 X203.111 Y71.072 E0.05343 ; perimeter
G1 X203.392 Y71.447 E0.01931 ; perimeter
G1 X203.559 Y71.752 E0.01432 ; perimeter
G1 X203.684 Y72.072 E0.01416 ; perimeter
G1 X203.763 Y72.392 E0.01359 ; perimeter
G1 X203.771 Y72.740 E0.01430 ; perimeter
G1 X203.723 Y73.130 E0.01623 ; perimeter
G1 X203.625 Y73.516 E0.01641 ; perimeter
G1 X203.472 Y73.911 E0.01741 ; perimeter
G1 X203.247 Y74.329 E0.01959 ; perimeter
G1 X203.013 Y74.671 E0.01706 ; perimeter
G1 X202.714 Y75.019 E0.01893 ; perimeter
G1 X202.362 Y75.348 E0.01982 ; perimeter
G1 X173.526 Y99.544 E1.55072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.431 Y100.141 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X172.578 Y99.124 E0.05471 ; perimeter
G1 X201.748 Y74.647 E1.56870 ; perimeter
G1 X202.037 Y74.367 E0.01657 ; perimeter
G1 X202.286 Y74.045 E0.01678 ; perimeter
G1 X202.481 Y73.694 E0.01654 ; perimeter
G1 X202.617 Y73.324 E0.01624 ; perimeter
G1 X202.688 Y72.934 E0.01634 ; perimeter
G1 X202.691 Y72.572 E0.01493 ; perimeter
G1 X202.625 Y72.210 E0.01513 ; perimeter
G1 X202.490 Y71.875 E0.01489 ; perimeter
G1 X202.297 Y71.587 E0.01426 ; perimeter
G1 X201.291 Y70.389 E0.06447 ; perimeter
G1 X202.326 Y69.520 E0.05565 ; perimeter
G1 X203.421 Y70.826 E0.07019 ; perimeter
G1 X203.726 Y71.232 E0.02092 ; perimeter
G1 X203.919 Y71.584 E0.01655 ; perimeter
G1 X204.063 Y71.952 E0.01628 ; perimeter
G1 X204.158 Y72.339 E0.01642 ; perimeter
G1 X204.168 Y72.759 E0.01728 ; perimeter
G1 X204.114 Y73.204 E0.01847 ; perimeter
G1 X204.003 Y73.637 E0.01843 ; perimeter
G1 X203.833 Y74.077 E0.01940 ; perimeter
G1 X203.586 Y74.536 E0.02148 ; perimeter
G1 X203.328 Y74.913 E0.01883 ; perimeter
G1 X203.000 Y75.294 E0.02070 ; perimeter
G1 X202.625 Y75.645 E0.02116 ; perimeter
G1 X173.477 Y100.103 E1.56749 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.362 Y99.748 F10800.000 ; move inwards before travel
G1 F8640
G1 X172.578 Y99.124 E-0.30695 ; wipe and retract
G1 X174.081 Y97.863 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X195.951 Y68.460 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X195.607 Y68.050 E0.02205 ; perimeter
G1 X198.094 Y65.962 E0.13378 ; perimeter
G1 X194.683 Y61.897 E0.21861 ; perimeter
G1 X192.196 Y63.984 E0.13378 ; perimeter
G1 X191.852 Y63.574 E0.02205 ; perimeter
G1 X194.339 Y61.487 E0.13378 ; perimeter
G1 X191.890 Y58.568 E0.15696 ; perimeter
G1 X192.318 Y58.210 E0.02299 ; perimeter
G1 X201.315 Y68.932 E0.57663 ; perimeter
G1 X200.888 Y69.291 E0.02299 ; perimeter
G1 X198.439 Y66.372 E0.15696 ; perimeter
G1 X195.997 Y68.421 E0.13131 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.902 Y69.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X195.048 Y68.001 E0.05471 ; perimeter
G1 X197.536 Y65.913 E0.13378 ; perimeter
G1 X194.635 Y62.455 E0.18596 ; perimeter
G1 X192.147 Y64.543 E0.13378 ; perimeter
G1 X191.293 Y63.526 E0.05471 ; perimeter
G1 X193.781 Y61.438 E0.13378 ; perimeter
G1 X191.332 Y58.520 E0.15696 ; perimeter
G1 X192.367 Y57.651 E0.05564 ; perimeter
G1 X201.873 Y68.981 E0.60929 ; perimeter
G1 X200.839 Y69.849 E0.05565 ; perimeter
G1 X198.390 Y66.931 E0.15696 ; perimeter
G1 X195.948 Y68.980 E0.13131 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.947 Y68.621 F10800.000 ; move inwards before travel
G1 F8640
G1 X195.048 Y68.001 E-0.30695 ; wipe and retract
G1 X196.551 Y66.740 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X160.226 Y76.553 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.882 Y76.143 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.16390 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X187.324 Y57.426 E1.03563 ; perimeter
G1 X187.709 Y57.137 E0.01984 ; perimeter
G1 X188.063 Y56.927 E0.01697 ; perimeter
G1 X188.516 Y56.717 E0.02056 ; perimeter
G1 X188.931 Y56.583 E0.01795 ; perimeter
G1 X189.347 Y56.501 E0.01747 ; perimeter
G1 X189.754 Y56.471 E0.01683 ; perimeter
G1 X190.137 Y56.491 E0.01581 ; perimeter
G1 X190.479 Y56.561 E0.01435 ; perimeter
G1 X190.776 Y56.691 E0.01335 ; perimeter
G1 X191.073 Y56.871 E0.01432 ; perimeter
G1 X191.334 Y57.081 E0.01382 ; perimeter
G1 X190.849 Y57.488 E0.02607 ; perimeter
G1 X190.635 Y57.355 E0.01038 ; perimeter
G1 X190.218 Y57.200 E0.01834 ; perimeter
G1 X189.776 Y57.126 E0.01847 ; perimeter
G1 X189.323 Y57.132 E0.01864 ; perimeter
G1 X188.873 Y57.212 E0.01884 ; perimeter
G1 X188.437 Y57.363 E0.01903 ; perimeter
G1 X188.024 Y57.579 E0.01916 ; perimeter
G1 X187.673 Y57.833 E0.01788 ; perimeter
G1 X168.261 Y74.121 E1.04388 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X160.272 Y76.514 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.177 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.323 Y76.094 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.18617 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X187.077 Y57.116 E1.03013 ; perimeter
G1 X187.488 Y56.807 E0.02116 ; perimeter
G1 X187.878 Y56.576 E0.01869 ; perimeter
G1 X188.371 Y56.347 E0.02239 ; perimeter
G1 X188.831 Y56.199 E0.01989 ; perimeter
G1 X189.294 Y56.108 E0.01942 ; perimeter
G1 X189.750 Y56.074 E0.01886 ; perimeter
G1 X190.187 Y56.097 E0.01804 ; perimeter
G1 X190.599 Y56.180 E0.01731 ; perimeter
G1 X190.959 Y56.339 E0.01618 ; perimeter
G1 X191.301 Y56.546 E0.01646 ; perimeter
G1 X191.618 Y56.800 E0.01675 ; perimeter
G1 X191.907 Y57.118 E0.01770 ; perimeter
G1 X190.862 Y57.995 E0.05620 ; perimeter
G1 X190.767 Y57.903 E0.00544 ; perimeter
G1 X190.460 Y57.712 E0.01489 ; perimeter
G1 X190.116 Y57.585 E0.01513 ; perimeter
G1 X189.745 Y57.523 E0.01546 ; perimeter
G1 X189.361 Y57.527 E0.01584 ; perimeter
G1 X188.974 Y57.597 E0.01621 ; perimeter
G1 X188.594 Y57.728 E0.01654 ; perimeter
G1 X188.233 Y57.917 E0.01677 ; perimeter
G1 X187.916 Y58.146 E0.01612 ; perimeter
G1 X168.405 Y74.517 E1.04923 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X160.223 Y77.073 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.159 Y76.712 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.323 Y76.094 E-0.30695 ; wipe and retract
G1 X160.826 Y74.833 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y139.253 E0.04011 ; perimeter
G1 X83.970 Y139.253 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.04011 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.968 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.857 E0.06321 ; perimeter
G1 X84.366 Y138.857 E0.21040 ; perimeter
G1 X84.366 Y140.391 E0.06321 ; perimeter
G1 X84.010 Y140.747 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.132 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y138.460 E0.08630 ; perimeter
G1 X84.762 Y138.460 E0.24305 ; perimeter
G1 X84.762 Y140.555 E0.08630 ; perimeter
G1 X84.175 Y141.143 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.802 Y140.960 F10800.000 ; move inwards before travel
G1 F8640
G1 X80.883 Y141.173 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X83.432 Y140.278 ; move to first infill point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.6
G1 X83.654 Y140.056 E0.01632 ; infill
G1 X83.654 Y139.569 E0.02544 ; infill
G1 X83.431 Y139.569 E0.01163 ; infill
G1 X82.923 Y140.077 E0.03747 ; infill
G1 X82.213 Y140.077 E0.03707 ; infill
G1 X82.720 Y139.569 E0.03747 ; infill
G1 X82.010 Y139.569 E0.03707 ; infill
G1 X81.503 Y140.077 E0.03747 ; infill
G1 X80.792 Y140.077 E0.03707 ; infill
G1 X81.300 Y139.569 E0.03747 ; infill
G1 X80.590 Y139.569 E0.03707 ; infill
G1 X79.881 Y140.278 E0.05230 ; infill
G1 F8640
G1 X80.590 Y139.569 E-0.23134 ; wipe and retract
G1 X81.300 Y139.569 E-0.16399 ; wipe and retract
G1 X80.792 Y140.077 E-0.16576 ; wipe and retract
G1 X81.503 Y140.077 E-0.16399 ; wipe and retract
G1 X81.610 Y139.970 E-0.03492 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X77.183 Y126.257 E0.06025 ; perimeter
G1 X77.527 Y125.847 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.06025 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X84.204 Y117.890 E0.06025 ; perimeter
G1 X84.548 Y117.480 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.06025 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X76.625 Y126.306 E0.06025 ; perimeter
G1 X77.478 Y125.288 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.06025 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X83.645 Y117.939 E0.06025 ; perimeter
G1 X84.499 Y116.922 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.06025 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X98.702 Y114.365 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y114.115 E0.04806 ; perimeter
G1 X97.562 Y113.606 E0.02098 ; perimeter
G1 X98.702 Y113.845 E0.04797 ; perimeter
G1 X98.702 Y114.305 E0.01895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y114.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.166 Y114.434 E0.08142 ; perimeter
G1 X97.166 Y113.105 E0.05474 ; perimeter
G1 X99.098 Y113.522 E0.08144 ; perimeter
G1 X99.098 Y114.789 E0.05218 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y115.329 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.703 Y115.176 E0.03321 ; perimeter
G1 X96.769 Y114.753 E0.08153 ; perimeter
G1 X96.769 Y112.605 E0.08849 ; perimeter
G1 X97.798 Y112.847 E0.04353 ; perimeter
G1 X99.494 Y113.200 E0.07139 ; perimeter
G1 X99.494 Y115.269 E0.08523 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.134 Y115.155 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.703 Y115.176 E-0.18405 ; wipe and retract
G1 X96.769 Y114.753 E-0.45698 ; wipe and retract
G1 X96.769 Y114.238 E-0.11896 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X89.489 Y114.699 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.15587 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X62.051 Y95.986 E1.04342 ; perimeter
G1 X61.691 Y95.725 E0.01834 ; perimeter
G1 X61.278 Y95.509 E0.01917 ; perimeter
G1 X60.842 Y95.358 E0.01903 ; perimeter
G1 X60.391 Y95.278 E0.01884 ; perimeter
G1 X59.939 Y95.272 E0.01864 ; perimeter
G1 X59.497 Y95.346 E0.01847 ; perimeter
G1 X59.079 Y95.501 E0.01834 ; perimeter
G1 X58.865 Y95.634 E0.01039 ; perimeter
G1 X58.380 Y95.227 E0.02609 ; perimeter
G1 X58.642 Y95.018 E0.01380 ; perimeter
G1 X58.935 Y94.840 E0.01414 ; perimeter
G1 X59.282 Y94.693 E0.01549 ; perimeter
G1 X59.573 Y94.638 E0.01224 ; perimeter
G1 X59.970 Y94.617 E0.01634 ; perimeter
G1 X60.384 Y94.650 E0.01714 ; perimeter
G1 X60.784 Y94.729 E0.01677 ; perimeter
G1 X61.199 Y94.863 E0.01797 ; perimeter
G1 X61.652 Y95.073 E0.02056 ; perimeter
G1 X62.006 Y95.283 E0.01697 ; perimeter
G1 X62.391 Y95.573 E0.01984 ; perimeter
G1 X81.649 Y111.732 E1.03563 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X89.833 Y114.289 E0.16390 ; perimeter
G1 X89.528 Y114.653 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.538 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.16626 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X61.807 Y96.299 E1.04878 ; perimeter
G1 X61.481 Y96.063 E0.01657 ; perimeter
G1 X61.121 Y95.874 E0.01678 ; perimeter
G1 X60.741 Y95.743 E0.01654 ; perimeter
G1 X60.354 Y95.674 E0.01621 ; perimeter
G1 X59.969 Y95.669 E0.01584 ; perimeter
G1 X59.599 Y95.731 E0.01546 ; perimeter
G1 X59.255 Y95.859 E0.01513 ; perimeter
G1 X58.948 Y96.050 E0.01489 ; perimeter
G1 X58.853 Y96.141 E0.00544 ; perimeter
G1 X57.808 Y95.264 E0.05618 ; perimeter
G1 X58.106 Y94.939 E0.01816 ; perimeter
G1 X58.414 Y94.692 E0.01628 ; perimeter
G1 X58.754 Y94.486 E0.01640 ; perimeter
G1 X59.166 Y94.312 E0.01841 ; perimeter
G1 X59.526 Y94.243 E0.01508 ; perimeter
G1 X59.975 Y94.220 E0.01851 ; perimeter
G1 X60.439 Y94.256 E0.01918 ; perimeter
G1 X60.884 Y94.345 E0.01869 ; perimeter
G1 X61.343 Y94.493 E0.01990 ; perimeter
G1 X61.837 Y94.722 E0.02239 ; perimeter
G1 X62.227 Y94.954 E0.01869 ; perimeter
G1 X62.637 Y95.262 E0.02116 ; perimeter
G1 X81.793 Y111.335 E1.03013 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X90.392 Y114.240 E0.18617 ; perimeter
G1 X89.577 Y115.212 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.257 Y114.972 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.024 Y113.134 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X53.764 Y106.606 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X51.276 Y104.518 E0.13378 ; perimeter
G1 X48.827 Y107.437 E0.15696 ; perimeter
G1 X48.400 Y107.078 E0.02299 ; perimeter
G1 X57.397 Y96.356 E0.57663 ; perimeter
G1 X57.825 Y96.715 E0.02299 ; perimeter
G1 X55.375 Y99.633 E0.15696 ; perimeter
G1 X57.863 Y101.721 E0.13378 ; perimeter
G1 X57.519 Y102.131 E0.02205 ; perimeter
G1 X55.031 Y100.043 E0.13378 ; perimeter
G1 X51.620 Y104.108 E0.21861 ; perimeter
G1 X54.108 Y106.196 E0.13378 ; perimeter
G1 X53.802 Y106.560 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.813 Y107.164 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X51.325 Y105.077 E0.13378 ; perimeter
G1 X48.876 Y107.995 E0.15696 ; perimeter
G1 X47.841 Y107.127 E0.05564 ; perimeter
G1 X57.348 Y95.797 E0.60929 ; perimeter
G1 X58.383 Y96.666 E0.05564 ; perimeter
G1 X55.934 Y99.584 E0.15696 ; perimeter
G1 X58.422 Y101.672 E0.13378 ; perimeter
G1 X57.568 Y102.689 E0.05471 ; perimeter
G1 X55.080 Y100.602 E0.13378 ; perimeter
G1 X52.179 Y104.060 E0.18596 ; perimeter
G1 X54.666 Y106.147 E0.13378 ; perimeter
G1 X53.851 Y107.118 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.542 Y106.870 F10800.000 ; move inwards before travel
G1 F8640
G1 X51.325 Y105.077 E-0.74997 ; wipe and retract
G1 X51.297 Y105.110 E-0.01003 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X76.235 Y137.729 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.353 Y113.494 E1.55319 ; perimeter
G1 X47.001 Y113.166 E0.01982 ; perimeter
G1 X46.702 Y112.817 E0.01890 ; perimeter
G1 X46.448 Y112.446 E0.01854 ; perimeter
G1 X46.243 Y112.058 E0.01806 ; perimeter
G1 X46.090 Y111.663 E0.01747 ; perimeter
G1 X45.990 Y111.267 E0.01682 ; perimeter
G1 X45.943 Y110.882 E0.01598 ; perimeter
G1 X45.952 Y110.539 E0.01415 ; perimeter
G1 X46.031 Y110.218 E0.01360 ; perimeter
G1 X46.155 Y109.898 E0.01416 ; perimeter
G1 X46.324 Y109.590 E0.01447 ; perimeter
G1 X46.544 Y109.290 E0.01532 ; perimeter
G1 X47.438 Y108.225 E0.05727 ; perimeter
G1 X47.865 Y108.584 E0.02299 ; perimeter
G1 X47.100 Y109.495 E0.04901 ; perimeter
G1 X46.872 Y109.834 E0.01685 ; perimeter
G1 X46.707 Y110.246 E0.01826 ; perimeter
G1 X46.627 Y110.684 E0.01834 ; perimeter
G1 X46.631 Y111.132 E0.01847 ; perimeter
G1 X46.715 Y111.577 E0.01864 ; perimeter
G1 X46.873 Y112.006 E0.01884 ; perimeter
G1 X47.097 Y112.410 E0.01903 ; perimeter
G1 X47.381 Y112.778 E0.01917 ; perimeter
G1 X47.701 Y113.088 E0.01834 ; perimeter
G1 X76.579 Y137.319 E1.55295 ; perimeter
G1 X76.273 Y137.683 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.283 Y138.288 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X47.090 Y113.791 E1.56996 ; perimeter
G1 X46.715 Y113.440 E0.02116 ; perimeter
G1 X46.387 Y113.059 E0.02069 ; perimeter
G1 X46.108 Y112.651 E0.02036 ; perimeter
G1 X45.882 Y112.223 E0.01993 ; perimeter
G1 X45.712 Y111.784 E0.01942 ; perimeter
G1 X45.599 Y111.340 E0.01886 ; perimeter
G1 X45.546 Y110.901 E0.01821 ; perimeter
G1 X45.557 Y110.486 E0.01712 ; perimeter
G1 X45.652 Y110.099 E0.01642 ; perimeter
G1 X45.795 Y109.730 E0.01628 ; perimeter
G1 X45.989 Y109.377 E0.01661 ; perimeter
G1 X46.232 Y109.045 E0.01693 ; perimeter
G1 X47.389 Y107.667 E0.07414 ; perimeter
G1 X48.424 Y108.535 E0.05564 ; perimeter
G1 X47.418 Y109.734 E0.06447 ; perimeter
G1 X47.225 Y110.021 E0.01426 ; perimeter
G1 X47.090 Y110.356 E0.01489 ; perimeter
G1 X47.024 Y110.718 E0.01513 ; perimeter
G1 X47.027 Y111.093 E0.01546 ; perimeter
G1 X47.098 Y111.471 E0.01584 ; perimeter
G1 X47.234 Y111.840 E0.01621 ; perimeter
G1 X47.429 Y112.191 E0.01654 ; perimeter
G1 X47.678 Y112.514 E0.01678 ; perimeter
G1 X47.967 Y112.793 E0.01657 ; perimeter
G1 X77.137 Y137.270 E1.56870 ; perimeter
G1 X76.322 Y138.242 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.980 Y138.027 F10800.000 ; move inwards before travel
G1 F8640
G1 X73.797 Y136.130 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X150.728 Y114.365 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y113.845 E0.02143 ; perimeter
G1 X151.868 Y113.606 E0.04797 ; perimeter
G1 X151.868 Y114.115 E0.02098 ; perimeter
G1 X150.787 Y114.352 E0.04559 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y114.849 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.332 Y113.522 E0.05465 ; perimeter
G1 X152.264 Y113.105 E0.08144 ; perimeter
G1 X152.264 Y114.434 E0.05474 ; perimeter
G1 X150.390 Y114.837 E0.07895 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y115.329 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.935 Y113.200 E0.08770 ; perimeter
G1 X151.632 Y112.847 E0.07139 ; perimeter
G1 X152.660 Y112.605 E0.04353 ; perimeter
G1 X152.660 Y114.753 E0.08850 ; perimeter
G1 X150.727 Y115.176 E0.08153 ; perimeter
G1 X149.994 Y115.317 E0.03074 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.111 Y114.969 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.935 Y113.200 E-0.48913 ; wipe and retract
G1 X151.084 Y112.961 E-0.27087 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X164.882 Y117.480 E0.06025 ; perimeter
G1 X165.226 Y117.890 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.06025 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X171.902 Y125.847 E0.06025 ; perimeter
G1 X172.247 Y126.257 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.06025 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X164.931 Y116.922 E0.06025 ; perimeter
G1 X165.784 Y117.939 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.06025 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X171.951 Y125.288 E0.06025 ; perimeter
G1 X172.805 Y126.306 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.06025 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y139.253 E0.04011 ; perimeter
G1 X169.775 Y139.253 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.04011 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.462 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.857 E0.06321 ; perimeter
G1 X170.171 Y138.857 E0.21040 ; perimeter
G1 X170.171 Y140.391 E0.06321 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.522 Y140.789 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.298 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y138.460 E0.08630 ; perimeter
G1 X170.567 Y138.460 E0.24306 ; perimeter
G1 X170.567 Y140.555 E0.08630 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.358 Y141.185 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.282 Y140.786 F10800.000 ; move inwards before travel
G1 X165.686 Y140.278 ; move to first infill point
G1 F7168.6
G1 X166.395 Y139.569 E0.05230 ; infill
G1 X167.105 Y139.569 E0.03707 ; infill
G1 X166.598 Y140.077 E0.03747 ; infill
G1 X167.308 Y140.077 E0.03707 ; infill
G1 X167.815 Y139.569 E0.03747 ; infill
G1 X168.526 Y139.569 E0.03707 ; infill
G1 X168.018 Y140.077 E0.03747 ; infill
G1 X168.728 Y140.077 E0.03707 ; infill
G1 X169.236 Y139.569 E0.03747 ; infill
G1 X169.459 Y139.569 E0.01163 ; infill
G1 X169.459 Y140.056 E0.02544 ; infill
G1 X169.238 Y140.278 E0.01633 ; infill
G1 F8640
G1 X169.459 Y140.056 E-0.07222 ; wipe and retract
G1 X169.459 Y139.569 E-0.11252 ; wipe and retract
G1 X169.236 Y139.569 E-0.05147 ; wipe and retract
G1 X168.728 Y140.077 E-0.16576 ; wipe and retract
G1 X168.018 Y140.077 E-0.16399 ; wipe and retract
G1 X168.526 Y139.569 E-0.16576 ; wipe and retract
G1 X168.403 Y139.569 E-0.02829 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X173.195 Y137.729 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X172.851 Y137.319 E0.02205 ; perimeter
G1 X201.729 Y113.088 E1.55295 ; perimeter
G1 X202.048 Y112.778 E0.01834 ; perimeter
G1 X202.332 Y112.410 E0.01917 ; perimeter
G1 X202.557 Y112.006 E0.01903 ; perimeter
G1 X202.715 Y111.575 E0.01892 ; perimeter
G1 X202.799 Y111.118 E0.01914 ; perimeter
G1 X202.802 Y110.684 E0.01789 ; perimeter
G1 X202.723 Y110.246 E0.01834 ; perimeter
G1 X202.557 Y109.834 E0.01826 ; perimeter
G1 X202.329 Y109.495 E0.01685 ; perimeter
G1 X201.564 Y108.584 E0.04901 ; perimeter
G1 X201.992 Y108.225 E0.02299 ; perimeter
G1 X202.826 Y109.218 E0.05343 ; perimeter
G1 X203.107 Y109.593 E0.01931 ; perimeter
G1 X203.274 Y109.898 E0.01432 ; perimeter
G1 X203.399 Y110.218 E0.01416 ; perimeter
G1 X203.478 Y110.539 E0.01359 ; perimeter
G1 X203.486 Y110.886 E0.01430 ; perimeter
G1 X203.438 Y111.277 E0.01623 ; perimeter
G1 X203.340 Y111.663 E0.01641 ; perimeter
G1 X203.187 Y112.057 E0.01741 ; perimeter
G1 X202.962 Y112.476 E0.01959 ; perimeter
G1 X202.728 Y112.817 E0.01706 ; perimeter
G1 X202.428 Y113.166 E0.01893 ; perimeter
G1 X202.077 Y113.494 E0.01982 ; perimeter
G1 X173.241 Y137.691 E1.55072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.146 Y138.288 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X172.293 Y137.270 E0.05471 ; perimeter
G1 X201.463 Y112.793 E1.56870 ; perimeter
G1 X201.752 Y112.514 E0.01657 ; perimeter
G1 X202.000 Y112.191 E0.01678 ; perimeter
G1 X202.196 Y111.840 E0.01654 ; perimeter
G1 X202.331 Y111.470 E0.01624 ; perimeter
G1 X202.403 Y111.080 E0.01634 ; perimeter
G1 X202.406 Y110.718 E0.01493 ; perimeter
G1 X202.340 Y110.356 E0.01513 ; perimeter
G1 X202.205 Y110.021 E0.01489 ; perimeter
G1 X202.012 Y109.734 E0.01426 ; perimeter
G1 X201.006 Y108.535 E0.06447 ; perimeter
G1 X202.041 Y107.667 E0.05565 ; perimeter
G1 X203.136 Y108.972 E0.07019 ; perimeter
G1 X203.441 Y109.378 E0.02092 ; perimeter
G1 X203.634 Y109.730 E0.01655 ; perimeter
G1 X203.777 Y110.099 E0.01628 ; perimeter
G1 X203.873 Y110.486 E0.01642 ; perimeter
G1 X203.883 Y110.905 E0.01728 ; perimeter
G1 X203.828 Y111.350 E0.01847 ; perimeter
G1 X203.718 Y111.784 E0.01843 ; perimeter
G1 X203.548 Y112.223 E0.01940 ; perimeter
G1 X203.301 Y112.682 E0.02148 ; perimeter
G1 X203.042 Y113.059 E0.01883 ; perimeter
G1 X202.715 Y113.440 E0.02070 ; perimeter
G1 X202.340 Y113.791 E0.02116 ; perimeter
G1 X173.192 Y138.249 E1.56749 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.077 Y137.894 F10800.000 ; move inwards before travel
G1 F8640
G1 X172.293 Y137.270 E-0.30695 ; wipe and retract
G1 X173.796 Y136.009 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X195.666 Y106.606 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X195.322 Y106.196 E0.02205 ; perimeter
G1 X197.809 Y104.108 E0.13378 ; perimeter
G1 X194.398 Y100.043 E0.21861 ; perimeter
G1 X191.911 Y102.131 E0.13378 ; perimeter
G1 X191.566 Y101.721 E0.02205 ; perimeter
G1 X194.054 Y99.633 E0.13378 ; perimeter
G1 X191.605 Y96.715 E0.15696 ; perimeter
G1 X192.033 Y96.356 E0.02299 ; perimeter
G1 X201.030 Y107.078 E0.57663 ; perimeter
G1 X200.602 Y107.437 E0.02299 ; perimeter
G1 X198.153 Y104.518 E0.15696 ; perimeter
G1 X195.712 Y106.567 E0.13131 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.617 Y107.164 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X194.763 Y106.147 E0.05471 ; perimeter
G1 X197.251 Y104.060 E0.13378 ; perimeter
G1 X194.349 Y100.602 E0.18596 ; perimeter
G1 X191.862 Y102.689 E0.13378 ; perimeter
G1 X191.008 Y101.672 E0.05471 ; perimeter
G1 X193.496 Y99.584 E0.13378 ; perimeter
G1 X191.047 Y96.666 E0.15696 ; perimeter
G1 X192.081 Y95.797 E0.05564 ; perimeter
G1 X201.588 Y107.127 E0.60929 ; perimeter
G1 X200.554 Y107.995 E0.05565 ; perimeter
G1 X198.105 Y105.077 E0.15696 ; perimeter
G1 X195.663 Y107.126 E0.13131 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.662 Y106.767 F10800.000 ; move inwards before travel
G1 F8640
G1 X194.763 Y106.147 E-0.30695 ; wipe and retract
G1 X196.266 Y104.886 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
G1 X159.940 Y114.699 ; move to first perimeter point
G1 Z19.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.596 Y114.289 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.16390 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X187.039 Y95.573 E1.03563 ; perimeter
G1 X187.424 Y95.283 E0.01984 ; perimeter
G1 X187.778 Y95.073 E0.01697 ; perimeter
G1 X188.231 Y94.863 E0.02056 ; perimeter
G1 X188.646 Y94.729 E0.01795 ; perimeter
G1 X189.062 Y94.647 E0.01747 ; perimeter
G1 X189.469 Y94.617 E0.01683 ; perimeter
G1 X189.852 Y94.638 E0.01581 ; perimeter
G1 X190.194 Y94.707 E0.01435 ; perimeter
G1 X190.490 Y94.837 E0.01335 ; perimeter
G1 X190.788 Y95.017 E0.01432 ; perimeter
G1 X191.049 Y95.227 E0.01382 ; perimeter
G1 X190.564 Y95.634 E0.02607 ; perimeter
G1 X190.350 Y95.501 E0.01038 ; perimeter
G1 X189.933 Y95.346 E0.01834 ; perimeter
G1 X189.491 Y95.272 E0.01847 ; perimeter
G1 X189.038 Y95.278 E0.01864 ; perimeter
G1 X188.588 Y95.358 E0.01884 ; perimeter
G1 X188.151 Y95.509 E0.01903 ; perimeter
G1 X187.739 Y95.725 E0.01916 ; perimeter
G1 X187.387 Y95.979 E0.01788 ; perimeter
G1 X167.976 Y112.267 E1.04388 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.986 Y114.661 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.892 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.038 Y114.240 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.18617 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X186.792 Y95.262 E1.03013 ; perimeter
G1 X187.203 Y94.954 E0.02116 ; perimeter
G1 X187.593 Y94.722 E0.01869 ; perimeter
G1 X188.086 Y94.493 E0.02239 ; perimeter
G1 X188.546 Y94.345 E0.01989 ; perimeter
G1 X189.008 Y94.254 E0.01942 ; perimeter
G1 X189.465 Y94.220 E0.01886 ; perimeter
G1 X189.902 Y94.243 E0.01804 ; perimeter
G1 X190.314 Y94.327 E0.01731 ; perimeter
G1 X190.674 Y94.485 E0.01618 ; perimeter
G1 X191.015 Y94.692 E0.01646 ; perimeter
G1 X191.332 Y94.947 E0.01675 ; perimeter
G1 X191.622 Y95.264 E0.01770 ; perimeter
G1 X190.577 Y96.141 E0.05620 ; perimeter
G1 X190.482 Y96.050 E0.00544 ; perimeter
G1 X190.175 Y95.859 E0.01489 ; perimeter
G1 X189.830 Y95.731 E0.01513 ; perimeter
G1 X189.460 Y95.669 E0.01546 ; perimeter
G1 X189.076 Y95.674 E0.01584 ; perimeter
G1 X188.688 Y95.743 E0.01621 ; perimeter
G1 X188.309 Y95.874 E0.01654 ; perimeter
G1 X187.948 Y96.063 E0.01677 ; perimeter
G1 X187.631 Y96.292 E0.01612 ; perimeter
G1 X168.120 Y112.663 E1.04923 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X159.938 Y115.219 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.874 Y114.858 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;19.75


G1 F8640
G1 X159.038 Y114.240 E-0.30695 ; wipe and retract
G1 X160.541 Y112.979 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;19.75
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y101.107 E0.04011 ; perimeter
G1 X84.255 Y101.107 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.04011 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.253 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.711 E0.06321 ; perimeter
G1 X84.651 Y100.711 E0.21040 ; perimeter
M73 P87 R17
G1 X84.651 Y102.245 E0.06321 ; perimeter
G1 X84.296 Y102.600 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.417 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y100.314 E0.08630 ; perimeter
G1 X85.047 Y100.314 E0.24305 ; perimeter
G1 X85.047 Y102.409 E0.08630 ; perimeter
G1 X84.460 Y102.997 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.087 Y102.814 F10800.000 ; move inwards before travel
G1 X84.028 Y102.131 ; move to first infill point
G1 F7168.6
G1 X83.320 Y101.423 E0.05230 ; infill
G1 X82.610 Y101.423 E0.03707 ; infill
G1 X83.117 Y101.931 E0.03747 ; infill
G1 X82.407 Y101.931 E0.03707 ; infill
G1 X81.899 Y101.423 E0.03747 ; infill
G1 X81.189 Y101.423 E0.03707 ; infill
G1 X81.697 Y101.931 E0.03747 ; infill
G1 X80.987 Y101.931 E0.03707 ; infill
G1 X80.479 Y101.423 E0.03747 ; infill
G1 X80.256 Y101.423 E0.01163 ; infill
G1 X80.256 Y101.910 E0.02544 ; infill
G1 X80.477 Y102.131 E0.01631 ; infill
G1 F8640
G1 X80.256 Y101.910 E-0.07217 ; wipe and retract
G1 X80.256 Y101.423 E-0.11255 ; wipe and retract
G1 X80.479 Y101.423 E-0.05143 ; wipe and retract
G1 X80.987 Y101.931 E-0.16576 ; wipe and retract
G1 X81.697 Y101.931 E-0.16399 ; wipe and retract
G1 X81.189 Y101.423 E-0.16576 ; wipe and retract
G1 X81.312 Y101.423 E-0.02834 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X76.550 Y92.314 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02205 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X77.531 Y88.163 E0.05690 ; perimeter
G1 X77.875 Y87.753 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.05690 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X84.551 Y79.796 E0.05690 ; perimeter
G1 X84.895 Y79.386 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.05690 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.812 Y77.699 E0.02205 ; perimeter
G1 X76.588 Y92.268 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.599 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.05471 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X76.972 Y88.212 E0.05690 ; perimeter
G1 X77.826 Y87.195 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.05690 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X83.993 Y79.845 E0.05690 ; perimeter
G1 X84.846 Y78.828 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.05690 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.371 Y77.651 E0.05471 ; perimeter
G1 X76.637 Y92.826 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.453 Y92.499 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.30695 ; wipe and retract
G1 X76.842 Y90.515 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X98.987 Y76.074 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y75.836 E0.04796 ; perimeter
G1 X97.847 Y75.460 E0.01551 ; perimeter
G1 X98.987 Y75.698 E0.04796 ; perimeter
G1 X98.987 Y76.014 E0.01303 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y76.558 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.451 Y76.153 E0.08134 ; perimeter
G1 X97.451 Y74.959 E0.04916 ; perimeter
G1 X99.383 Y75.376 E0.08143 ; perimeter
G1 X99.383 Y76.498 E0.04624 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y77.042 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.017 Y76.688 E0.07405 ; perimeter
G1 X97.055 Y76.469 E0.04068 ; perimeter
G1 X97.055 Y74.459 E0.08281 ; perimeter
M73 Q87 S18
G1 X98.056 Y74.695 E0.04238 ; perimeter
G1 X99.780 Y75.054 E0.07253 ; perimeter
G1 X99.780 Y76.982 E0.07946 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.419 Y76.870 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.017 Y76.688 E-0.41254 ; wipe and retract
G1 X97.055 Y76.469 E-0.22799 ; wipe and retract
G1 X97.055 Y75.951 E-0.11946 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X89.774 Y76.553 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.15587 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X62.202 Y57.728 E1.05063 ; perimeter
G1 X61.842 Y57.467 E0.01834 ; perimeter
G1 X61.429 Y57.251 E0.01917 ; perimeter
G1 X60.988 Y57.098 E0.01925 ; perimeter
G1 X60.515 Y57.022 E0.01971 ; perimeter
G1 X60.073 Y57.061 E0.01828 ; perimeter
G1 X59.671 Y57.169 E0.01716 ; perimeter
G1 X59.295 Y57.344 E0.01709 ; perimeter
G1 X59.123 Y57.465 E0.00867 ; perimeter
G1 X58.666 Y57.082 E0.02456 ; perimeter
G1 X58.932 Y56.868 E0.01402 ; perimeter
G1 X59.225 Y56.691 E0.01411 ; perimeter
G1 X59.546 Y56.550 E0.01445 ; perimeter
G1 X59.882 Y56.452 E0.01443 ; perimeter
G1 X60.226 Y56.399 E0.01433 ; perimeter
G1 X60.552 Y56.395 E0.01345 ; perimeter
G1 X60.948 Y56.474 E0.01665 ; perimeter
G1 X61.356 Y56.607 E0.01766 ; perimeter
G1 X61.765 Y56.792 E0.01850 ; perimeter
G1 X62.158 Y57.026 E0.01885 ; perimeter
G1 X62.542 Y57.314 E0.01976 ; perimeter
G1 X81.934 Y73.586 E1.04284 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.118 Y76.143 E0.16390 ; perimeter
G1 X89.813 Y76.507 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.823 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.16626 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X61.958 Y58.040 E1.05599 ; perimeter
G1 X61.633 Y57.804 E0.01657 ; perimeter
G1 X61.272 Y57.616 E0.01678 ; perimeter
G1 X60.891 Y57.484 E0.01662 ; perimeter
G1 X60.501 Y57.421 E0.01625 ; perimeter
G1 X60.143 Y57.453 E0.01482 ; perimeter
G1 X59.807 Y57.543 E0.01432 ; perimeter
G1 X59.494 Y57.688 E0.01423 ; perimeter
G1 X59.201 Y57.894 E0.01476 ; perimeter
G1 X59.117 Y57.978 E0.00486 ; perimeter
G1 X58.094 Y57.119 E0.05505 ; perimeter
G1 X58.401 Y56.784 E0.01870 ; perimeter
G1 X58.705 Y56.542 E0.01599 ; perimeter
G1 X59.041 Y56.339 E0.01622 ; perimeter
G1 X59.410 Y56.177 E0.01658 ; perimeter
G1 X59.796 Y56.064 E0.01657 ; perimeter
G1 X60.193 Y56.003 E0.01653 ; perimeter
G1 X60.589 Y55.998 E0.01632 ; perimeter
G1 X61.049 Y56.090 E0.01933 ; perimeter
G1 X61.499 Y56.237 E0.01952 ; perimeter
G1 X61.948 Y56.440 E0.02031 ; perimeter
G1 X62.379 Y56.696 E0.02063 ; perimeter
G1 X62.788 Y57.003 E0.02109 ; perimeter
G1 X82.078 Y73.189 E1.03734 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X90.677 Y76.094 E0.18617 ; perimeter
G1 X89.862 Y77.065 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.543 Y76.826 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.309 Y74.987 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X53.910 Y68.343 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X51.544 Y66.358 E0.12723 ; perimeter
G1 X49.095 Y69.276 E0.15696 ; perimeter
G1 X48.685 Y68.932 E0.02205 ; perimeter
G1 X57.682 Y58.210 E0.57663 ; perimeter
G1 X58.092 Y58.554 E0.02205 ; perimeter
G1 X55.643 Y61.472 E0.15696 ; perimeter
G1 X58.009 Y63.458 E0.12723 ; perimeter
G1 X57.665 Y63.868 E0.02205 ; perimeter
G1 X55.299 Y61.882 E0.12723 ; perimeter
G1 X51.888 Y65.948 E0.21861 ; perimeter
G1 X54.254 Y67.933 E0.12723 ; perimeter
G1 X53.949 Y68.297 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.959 Y68.901 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X51.593 Y66.916 E0.12723 ; perimeter
G1 X49.144 Y69.835 E0.15696 ; perimeter
G1 X48.127 Y68.981 E0.05471 ; perimeter
G1 X57.633 Y57.651 E0.60929 ; perimeter
G1 X58.651 Y58.505 E0.05471 ; perimeter
G1 X56.202 Y61.424 E0.15696 ; perimeter
G1 X58.568 Y63.409 E0.12723 ; perimeter
G1 X57.714 Y64.426 E0.05471 ; perimeter
G1 X55.348 Y62.441 E0.12723 ; perimeter
G1 X52.446 Y65.899 E0.18596 ; perimeter
G1 X54.812 Y67.884 E0.12723 ; perimeter
G1 X53.997 Y68.855 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.690 Y68.605 F10800.000 ; move inwards before travel
G1 F8640
G1 X51.593 Y66.916 E-0.71329 ; wipe and retract
G1 X51.463 Y67.071 E-0.04671 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X76.328 Y99.422 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.504 Y75.236 E1.55010 ; perimeter
G1 X47.153 Y74.908 E0.01976 ; perimeter
G1 X46.855 Y74.561 E0.01885 ; perimeter
G1 X46.601 Y74.191 E0.01849 ; perimeter
G1 X46.398 Y73.807 E0.01790 ; perimeter
G1 X46.245 Y73.405 E0.01772 ; perimeter
G1 X46.200 Y73.111 E0.01223 ; perimeter
G1 X46.193 Y72.773 E0.01394 ; perimeter
G1 X46.230 Y72.425 E0.01443 ; perimeter
G1 X46.312 Y72.083 E0.01447 ; perimeter
G1 X46.439 Y71.755 E0.01451 ; perimeter
G1 X46.609 Y71.445 E0.01453 ; perimeter
G1 X46.829 Y71.144 E0.01539 ; perimeter
G1 X47.723 Y70.079 E0.05727 ; perimeter
G1 X48.133 Y70.423 E0.02205 ; perimeter
G1 X47.372 Y71.330 E0.04877 ; perimeter
G1 X47.148 Y71.650 E0.01612 ; perimeter
G1 X46.971 Y72.030 E0.01725 ; perimeter
G1 X46.862 Y72.434 E0.01725 ; perimeter
G1 X46.825 Y72.861 E0.01765 ; perimeter
G1 X46.885 Y73.370 E0.02113 ; perimeter
G1 X47.024 Y73.747 E0.01655 ; perimeter
G1 X47.248 Y74.151 E0.01903 ; perimeter
G1 X47.533 Y74.520 E0.01917 ; perimeter
G1 X47.852 Y74.829 E0.01834 ; perimeter
G1 X76.672 Y99.012 E1.54987 ; perimeter
G1 X76.367 Y99.376 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.377 Y99.981 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X47.241 Y75.532 E1.56687 ; perimeter
G1 X46.867 Y75.183 E0.02109 ; perimeter
G1 X46.540 Y74.803 E0.02063 ; perimeter
G1 X46.262 Y74.396 E0.02031 ; perimeter
G1 X46.036 Y73.971 E0.01984 ; perimeter
G1 X45.860 Y73.506 E0.02048 ; perimeter
G1 X45.805 Y73.146 E0.01502 ; perimeter
G1 X45.796 Y72.756 E0.01605 ; perimeter
G1 X45.839 Y72.357 E0.01655 ; perimeter
G1 X45.933 Y71.965 E0.01661 ; perimeter
G1 X46.079 Y71.588 E0.01666 ; perimeter
G1 X46.273 Y71.232 E0.01669 ; perimeter
G1 X46.517 Y70.899 E0.01701 ; perimeter
G1 X47.674 Y69.520 E0.07413 ; perimeter
G1 X48.691 Y70.374 E0.05471 ; perimeter
G1 X47.687 Y71.571 E0.06438 ; perimeter
G1 X47.492 Y71.849 E0.01398 ; perimeter
G1 X47.344 Y72.166 E0.01439 ; perimeter
G1 X47.254 Y72.503 E0.01439 ; perimeter
G1 X47.223 Y72.855 E0.01453 ; perimeter
G1 X47.273 Y73.277 E0.01753 ; perimeter
G1 X47.385 Y73.582 E0.01336 ; perimeter
G1 X47.580 Y73.932 E0.01654 ; perimeter
G1 X47.829 Y74.255 E0.01678 ; perimeter
G1 X48.118 Y74.535 E0.01657 ; perimeter
G1 X77.231 Y98.963 E1.56561 ; perimeter
G1 X76.416 Y99.935 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.074 Y99.720 F10800.000 ; move inwards before travel
G1 F8640
G1 X73.891 Y97.823 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X151.013 Y76.074 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y75.698 E0.01550 ; perimeter
G1 X152.153 Y75.460 E0.04796 ; perimeter
G1 X152.153 Y75.836 E0.01551 ; perimeter
G1 X151.072 Y76.063 E0.04549 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y76.558 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.617 Y75.376 E0.04871 ; perimeter
G1 X152.549 Y74.959 E0.08143 ; perimeter
G1 X152.549 Y76.153 E0.04916 ; perimeter
G1 X150.676 Y76.547 E0.07887 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y77.042 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.220 Y75.054 E0.08193 ; perimeter
G1 X151.944 Y74.695 E0.07253 ; perimeter
G1 X152.945 Y74.459 E0.04238 ; perimeter
G1 X152.945 Y76.469 E0.08282 ; perimeter
G1 X151.983 Y76.688 E0.04068 ; perimeter
G1 X150.279 Y77.031 E0.07158 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.396 Y76.683 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.220 Y75.054 E-0.45668 ; wipe and retract
G1 X151.506 Y74.786 E-0.30332 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X173.450 Y92.314 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.188 Y77.699 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02205 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X165.105 Y79.386 E0.05690 ; perimeter
G1 X165.449 Y79.796 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.05690 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X172.125 Y87.753 E0.05690 ; perimeter
G1 X172.469 Y88.163 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.05690 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.496 Y92.275 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.401 Y92.872 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.629 Y77.651 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05471 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X165.154 Y78.828 E0.05690 ; perimeter
G1 X166.007 Y79.845 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.05690 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X172.174 Y87.195 E0.05690 ; perimeter
G1 X173.028 Y88.212 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.05690 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.447 Y92.833 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.180 Y92.539 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.324 Y90.318 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y101.107 E0.04011 ; perimeter
G1 X170.060 Y101.107 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.04011 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.747 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.711 E0.06321 ; perimeter
G1 X170.456 Y100.711 E0.21040 ; perimeter
G1 X170.456 Y102.245 E0.06321 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.807 Y102.643 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.583 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y100.314 E0.08630 ; perimeter
G1 X170.853 Y100.314 E0.24306 ; perimeter
G1 X170.853 Y102.409 E0.08630 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.643 Y103.039 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.567 Y102.640 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.953 Y102.409 E-0.21581 ; wipe and retract
G1 X164.953 Y100.314 E-0.48370 ; wipe and retract
G1 X165.215 Y100.314 E-0.06049 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X166.282 Y102.131 ; move to first infill point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.59
G1 X166.061 Y101.910 E0.01631 ; infill
G1 X166.061 Y101.423 E0.02544 ; infill
G1 X166.284 Y101.423 E0.01163 ; infill
G1 X166.792 Y101.931 E0.03747 ; infill
G1 X167.502 Y101.931 E0.03707 ; infill
G1 X166.994 Y101.423 E0.03747 ; infill
G1 X167.704 Y101.423 E0.03707 ; infill
G1 X168.212 Y101.931 E0.03747 ; infill
G1 X168.922 Y101.931 E0.03707 ; infill
G1 X168.415 Y101.423 E0.03747 ; infill
G1 X169.125 Y101.423 E0.03707 ; infill
G1 X169.833 Y102.131 E0.05230 ; infill
G1 F8640
G1 X169.125 Y101.423 E-0.23135 ; wipe and retract
G1 X168.415 Y101.423 E-0.16399 ; wipe and retract
G1 X168.922 Y101.931 E-0.16576 ; wipe and retract
G1 X168.212 Y101.931 E-0.16399 ; wipe and retract
G1 X168.105 Y101.824 E-0.03492 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X173.672 Y99.422 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X173.328 Y99.012 E0.02205 ; perimeter
G1 X202.148 Y74.829 E1.54987 ; perimeter
G1 X202.467 Y74.520 E0.01834 ; perimeter
G1 X202.752 Y74.151 E0.01917 ; perimeter
G1 X202.979 Y73.743 E0.01925 ; perimeter
G1 X203.136 Y73.291 E0.01969 ; perimeter
G1 X203.174 Y72.851 E0.01819 ; perimeter
G1 X203.138 Y72.434 E0.01725 ; perimeter
G1 X203.029 Y72.030 E0.01725 ; perimeter
G1 X202.852 Y71.650 E0.01725 ; perimeter
G1 X202.628 Y71.330 E0.01612 ; perimeter
G1 X201.867 Y70.423 E0.04877 ; perimeter
G1 X202.277 Y70.079 E0.02205 ; perimeter
G1 X203.009 Y70.951 E0.04689 ; perimeter
G1 X203.395 Y71.452 E0.02607 ; perimeter
G1 X203.561 Y71.755 E0.01425 ; perimeter
G1 X203.678 Y72.055 E0.01324 ; perimeter
G1 X203.770 Y72.427 E0.01579 ; perimeter
G1 X203.807 Y72.773 E0.01434 ; perimeter
G1 X203.800 Y73.109 E0.01383 ; perimeter
G1 X203.747 Y73.436 E0.01366 ; perimeter
G1 X203.600 Y73.812 E0.01663 ; perimeter
G1 X203.399 Y74.191 E0.01766 ; perimeter
G1 X203.145 Y74.561 E0.01850 ; perimeter
G1 X202.847 Y74.908 E0.01885 ; perimeter
G1 X202.496 Y75.236 E0.01976 ; perimeter
G1 X173.718 Y99.384 E1.54763 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.623 Y99.981 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X172.769 Y98.963 E0.05471 ; perimeter
G1 X201.882 Y74.535 E1.56561 ; perimeter
G1 X202.171 Y74.255 E0.01657 ; perimeter
G1 X202.420 Y73.932 E0.01678 ; perimeter
G1 X202.616 Y73.580 E0.01662 ; perimeter
G1 X202.745 Y73.207 E0.01625 ; perimeter
G1 X202.776 Y72.851 E0.01473 ; perimeter
G1 X202.746 Y72.503 E0.01439 ; perimeter
G1 X202.656 Y72.166 E0.01439 ; perimeter
G1 X202.508 Y71.849 E0.01439 ; perimeter
G1 X202.313 Y71.571 E0.01398 ; perimeter
G1 X201.309 Y70.374 E0.06438 ; perimeter
G1 X202.326 Y69.520 E0.05471 ; perimeter
G1 X203.318 Y70.702 E0.06356 ; perimeter
G1 X203.728 Y71.235 E0.02769 ; perimeter
G1 X203.921 Y71.588 E0.01658 ; perimeter
G1 X204.056 Y71.935 E0.01533 ; perimeter
G1 X204.162 Y72.357 E0.01795 ; perimeter
G1 X204.204 Y72.756 E0.01652 ; perimeter
G1 X204.195 Y73.145 E0.01601 ; perimeter
G1 X204.132 Y73.541 E0.01654 ; perimeter
G1 X203.961 Y73.978 E0.01932 ; perimeter
G1 X203.738 Y74.396 E0.01952 ; perimeter
G1 X203.460 Y74.803 E0.02031 ; perimeter
G1 X203.133 Y75.183 E0.02063 ; perimeter
G1 X202.759 Y75.532 E0.02109 ; perimeter
G1 X173.669 Y99.942 E1.56440 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.553 Y99.587 F10800.000 ; move inwards before travel
G1 F8640
G1 X172.769 Y98.963 E-0.30695 ; wipe and retract
G1 X174.272 Y97.702 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X196.090 Y68.343 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X195.746 Y67.933 E0.02205 ; perimeter
G1 X198.112 Y65.948 E0.12723 ; perimeter
G1 X194.701 Y61.882 E0.21861 ; perimeter
G1 X192.335 Y63.868 E0.12723 ; perimeter
G1 X191.991 Y63.458 E0.02205 ; perimeter
G1 X194.357 Y61.472 E0.12723 ; perimeter
G1 X191.908 Y58.554 E0.15696 ; perimeter
G1 X192.318 Y58.210 E0.02205 ; perimeter
G1 X201.315 Y68.932 E0.57663 ; perimeter
G1 X200.905 Y69.276 E0.02205 ; perimeter
G1 X198.456 Y66.358 E0.15696 ; perimeter
G1 X196.136 Y68.304 E0.12476 ; perimeter
M204 S1000 ; adjust acceleration
G1 X196.041 Y68.901 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X195.188 Y67.884 E0.05471 ; perimeter
G1 X197.554 Y65.899 E0.12723 ; perimeter
G1 X194.652 Y62.441 E0.18596 ; perimeter
G1 X192.286 Y64.426 E0.12723 ; perimeter
G1 X191.432 Y63.409 E0.05471 ; perimeter
G1 X193.798 Y61.424 E0.12723 ; perimeter
G1 X191.349 Y58.505 E0.15696 ; perimeter
G1 X192.367 Y57.651 E0.05471 ; perimeter
G1 X201.873 Y68.981 E0.60929 ; perimeter
G1 X200.856 Y69.835 E0.05471 ; perimeter
G1 X198.407 Y66.916 E0.15696 ; perimeter
G1 X196.087 Y68.863 E0.12476 ; perimeter
M204 S1000 ; adjust acceleration
G1 X196.090 Y68.504 F10800.000 ; move inwards before travel
G1 F8640
G1 X195.188 Y67.884 E-0.30695 ; wipe and retract
G1 X196.691 Y66.623 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X160.226 Y76.553 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.882 Y76.143 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.16390 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X187.458 Y57.314 E1.04284 ; perimeter
G1 X187.842 Y57.026 E0.01977 ; perimeter
G1 X188.211 Y56.806 E0.01769 ; perimeter
G1 X188.645 Y56.606 E0.01970 ; perimeter
G1 X189.060 Y56.472 E0.01795 ; perimeter
G1 X189.447 Y56.395 E0.01626 ; perimeter
G1 X189.773 Y56.399 E0.01342 ; perimeter
G1 X190.134 Y56.456 E0.01505 ; perimeter
G1 X190.454 Y56.550 E0.01376 ; perimeter
G1 X190.775 Y56.691 E0.01445 ; perimeter
G1 X191.068 Y56.868 E0.01411 ; perimeter
G1 X191.334 Y57.082 E0.01402 ; perimeter
G1 X190.877 Y57.465 E0.02456 ; perimeter
G1 X190.705 Y57.344 E0.00866 ; perimeter
G1 X190.329 Y57.169 E0.01709 ; perimeter
G1 X189.927 Y57.061 E0.01716 ; perimeter
G1 X189.485 Y57.022 E0.01828 ; perimeter
G1 X189.012 Y57.098 E0.01971 ; perimeter
G1 X188.571 Y57.251 E0.01925 ; perimeter
G1 X188.158 Y57.467 E0.01917 ; perimeter
G1 X187.803 Y57.724 E0.01807 ; perimeter
G1 X168.261 Y74.121 E1.05090 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X160.272 Y76.514 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.177 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.323 Y76.094 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.18617 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X187.212 Y57.003 E1.03734 ; perimeter
G1 X187.621 Y56.696 E0.02109 ; perimeter
G1 X188.026 Y56.455 E0.01944 ; perimeter
G1 X188.501 Y56.236 E0.02152 ; perimeter
G1 X188.960 Y56.088 E0.01986 ; perimeter
G1 X189.410 Y55.998 E0.01894 ; perimeter
G1 X189.807 Y56.003 E0.01633 ; perimeter
G1 X190.221 Y56.069 E0.01726 ; perimeter
G1 X190.590 Y56.177 E0.01586 ; perimeter
G1 X190.959 Y56.339 E0.01658 ; perimeter
G1 X191.295 Y56.542 E0.01622 ; perimeter
G1 X191.599 Y56.784 E0.01599 ; perimeter
G1 X191.906 Y57.119 E0.01870 ; perimeter
G1 X190.883 Y57.978 E0.05505 ; perimeter
G1 X190.799 Y57.894 E0.00486 ; perimeter
G1 X190.506 Y57.688 E0.01476 ; perimeter
G1 X190.193 Y57.543 E0.01423 ; perimeter
G1 X189.857 Y57.453 E0.01432 ; perimeter
G1 X189.499 Y57.421 E0.01482 ; perimeter
G1 X189.109 Y57.484 E0.01625 ; perimeter
G1 X188.728 Y57.616 E0.01662 ; perimeter
G1 X188.368 Y57.804 E0.01677 ; perimeter
G1 X188.047 Y58.036 E0.01631 ; perimeter
G1 X168.405 Y74.517 E1.05625 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X160.223 Y77.073 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.159 Y76.712 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.323 Y76.094 E-0.30695 ; wipe and retract
G1 X160.826 Y74.833 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y139.253 E0.04011 ; perimeter
G1 X83.970 Y139.253 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.04011 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.968 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.857 E0.06321 ; perimeter
G1 X84.366 Y138.857 E0.21040 ; perimeter
G1 X84.366 Y140.391 E0.06321 ; perimeter
G1 X84.010 Y140.747 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.132 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y138.460 E0.08630 ; perimeter
G1 X84.762 Y138.460 E0.24305 ; perimeter
G1 X84.762 Y140.555 E0.08630 ; perimeter
G1 X84.175 Y141.143 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.802 Y140.960 F10800.000 ; move inwards before travel
G1 X83.743 Y140.278 ; move to first infill point
G1 F7168.6
G1 X83.035 Y139.569 E0.05230 ; infill
G1 X82.324 Y139.569 E0.03707 ; infill
G1 X82.832 Y140.077 E0.03747 ; infill
G1 X82.122 Y140.077 E0.03707 ; infill
G1 X81.614 Y139.569 E0.03747 ; infill
G1 X80.904 Y139.569 E0.03707 ; infill
G1 X81.412 Y140.077 E0.03747 ; infill
G1 X80.701 Y140.077 E0.03707 ; infill
G1 X80.194 Y139.569 E0.03747 ; infill
G1 X79.971 Y139.569 E0.01163 ; infill
G1 X79.971 Y140.057 E0.02544 ; infill
G1 X80.192 Y140.278 E0.01631 ; infill
G1 F8640
G1 X79.971 Y140.057 E-0.07217 ; wipe and retract
G1 X79.971 Y139.569 E-0.11255 ; wipe and retract
G1 X80.194 Y139.569 E-0.05143 ; wipe and retract
G1 X80.701 Y140.077 E-0.16576 ; wipe and retract
G1 X81.412 Y140.077 E-0.16399 ; wipe and retract
G1 X80.904 Y139.569 E-0.16576 ; wipe and retract
G1 X81.027 Y139.569 E-0.02834 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X76.264 Y130.460 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02205 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X77.245 Y126.309 E0.05690 ; perimeter
G1 X77.589 Y125.899 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.05690 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X84.266 Y117.942 E0.05690 ; perimeter
G1 X84.610 Y117.532 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.05690 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.527 Y115.846 E0.02205 ; perimeter
G1 X76.303 Y130.414 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.313 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.05471 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X76.687 Y126.358 E0.05690 ; perimeter
G1 X77.541 Y125.341 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.05690 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X83.707 Y117.991 E0.05690 ; perimeter
G1 X84.561 Y116.974 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.05690 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.086 Y115.797 E0.05471 ; perimeter
G1 X76.352 Y130.972 E0.81609 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.168 Y130.645 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.30695 ; wipe and retract
G1 X76.557 Y128.661 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X98.702 Y114.221 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y113.982 E0.04796 ; perimeter
G1 X97.562 Y113.606 E0.01551 ; perimeter
G1 X98.702 Y113.844 E0.04796 ; perimeter
G1 X98.702 Y114.161 E0.01303 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y114.705 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.166 Y114.299 E0.08134 ; perimeter
G1 X97.166 Y113.105 E0.04916 ; perimeter
G1 X99.098 Y113.522 E0.08143 ; perimeter
G1 X99.098 Y114.645 E0.04624 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y115.189 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.732 Y114.834 E0.07405 ; perimeter
G1 X96.769 Y114.615 E0.04068 ; perimeter
G1 X96.769 Y112.605 E0.08281 ; perimeter
G1 X97.771 Y112.841 E0.04238 ; perimeter
G1 X99.494 Y113.200 E0.07253 ; perimeter
G1 X99.494 Y115.129 E0.07946 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.133 Y115.016 F10800.000 ; move inwards before travel
G1 F8640
G1 X97.732 Y114.834 E-0.41254 ; wipe and retract
G1 X96.769 Y114.615 E-0.22799 ; wipe and retract
G1 X96.769 Y114.098 E-0.11946 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X89.489 Y114.699 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.15587 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X61.917 Y95.874 E1.05063 ; perimeter
G1 X61.556 Y95.613 E0.01834 ; perimeter
G1 X61.144 Y95.397 E0.01917 ; perimeter
G1 X60.702 Y95.244 E0.01925 ; perimeter
G1 X60.230 Y95.168 E0.01971 ; perimeter
G1 X59.788 Y95.207 E0.01828 ; perimeter
G1 X59.386 Y95.315 E0.01716 ; perimeter
G1 X59.010 Y95.490 E0.01709 ; perimeter
G1 X58.838 Y95.611 E0.00867 ; perimeter
G1 X58.381 Y95.228 E0.02456 ; perimeter
G1 X58.646 Y95.014 E0.01402 ; perimeter
G1 X58.939 Y94.837 E0.01411 ; perimeter
G1 X59.260 Y94.696 E0.01445 ; perimeter
G1 X59.597 Y94.598 E0.01443 ; perimeter
G1 X59.940 Y94.545 E0.01433 ; perimeter
G1 X60.267 Y94.541 E0.01345 ; perimeter
G1 X60.663 Y94.620 E0.01665 ; perimeter
G1 X61.071 Y94.753 E0.01766 ; perimeter
G1 X61.480 Y94.938 E0.01850 ; perimeter
G1 X61.873 Y95.172 E0.01885 ; perimeter
G1 X62.257 Y95.460 E0.01976 ; perimeter
G1 X81.649 Y111.732 E1.04284 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X89.833 Y114.289 E0.16390 ; perimeter
G1 X89.528 Y114.653 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.538 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.16626 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X61.673 Y96.186 E1.05599 ; perimeter
G1 X61.347 Y95.951 E0.01657 ; perimeter
G1 X60.987 Y95.762 E0.01678 ; perimeter
G1 X60.605 Y95.630 E0.01662 ; perimeter
G1 X60.216 Y95.567 E0.01625 ; perimeter
G1 X59.858 Y95.599 E0.01482 ; perimeter
G1 X59.522 Y95.689 E0.01432 ; perimeter
G1 X59.209 Y95.835 E0.01423 ; perimeter
G1 X58.916 Y96.040 E0.01476 ; perimeter
G1 X58.832 Y96.124 E0.00486 ; perimeter
G1 X57.809 Y95.265 E0.05505 ; perimeter
G1 X58.116 Y94.931 E0.01870 ; perimeter
G1 X58.419 Y94.689 E0.01599 ; perimeter
G1 X58.756 Y94.485 E0.01622 ; perimeter
G1 X59.125 Y94.323 E0.01658 ; perimeter
G1 X59.511 Y94.210 E0.01657 ; perimeter
G1 X59.907 Y94.149 E0.01653 ; perimeter
G1 X60.304 Y94.144 E0.01632 ; perimeter
G1 X60.764 Y94.236 E0.01933 ; perimeter
G1 X61.214 Y94.383 E0.01952 ; perimeter
G1 X61.663 Y94.586 E0.02031 ; perimeter
G1 X62.094 Y94.842 E0.02063 ; perimeter
G1 X62.503 Y95.149 E0.02109 ; perimeter
G1 X81.793 Y111.335 E1.03734 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X90.392 Y114.240 E0.18617 ; perimeter
G1 X89.577 Y115.212 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.257 Y114.972 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.024 Y113.134 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X53.625 Y106.489 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X51.259 Y104.504 E0.12723 ; perimeter
G1 X48.810 Y107.422 E0.15696 ; perimeter
G1 X48.400 Y107.078 E0.02205 ; perimeter
G1 X57.397 Y96.356 E0.57663 ; perimeter
G1 X57.807 Y96.700 E0.02205 ; perimeter
G1 X55.358 Y99.619 E0.15696 ; perimeter
G1 X57.724 Y101.604 E0.12723 ; perimeter
G1 X57.380 Y102.014 E0.02205 ; perimeter
G1 X55.014 Y100.029 E0.12723 ; perimeter
G1 X51.603 Y104.094 E0.21861 ; perimeter
G1 X53.969 Y106.079 E0.12723 ; perimeter
G1 X53.663 Y106.443 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.674 Y107.048 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X51.308 Y105.062 E0.12723 ; perimeter
G1 X48.859 Y107.981 E0.15696 ; perimeter
G1 X47.841 Y107.127 E0.05471 ; perimeter
G1 X57.348 Y95.797 E0.60929 ; perimeter
G1 X58.365 Y96.651 E0.05471 ; perimeter
G1 X55.916 Y99.570 E0.15696 ; perimeter
G1 X58.282 Y101.555 E0.12723 ; perimeter
G1 X57.429 Y102.572 E0.05471 ; perimeter
G1 X55.063 Y100.587 E0.12723 ; perimeter
G1 X52.161 Y104.045 E0.18596 ; perimeter
G1 X54.527 Y106.030 E0.12723 ; perimeter
G1 X53.712 Y107.002 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.405 Y106.751 F10800.000 ; move inwards before travel
G1 F8640
G1 X51.308 Y105.062 E-0.71329 ; wipe and retract
G1 X51.178 Y105.217 E-0.04671 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X76.043 Y137.568 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.218 Y113.382 E1.55010 ; perimeter
G1 X46.868 Y113.054 E0.01976 ; perimeter
G1 X46.570 Y112.707 E0.01885 ; perimeter
G1 X46.316 Y112.337 E0.01849 ; perimeter
G1 X46.113 Y111.953 E0.01790 ; perimeter
G1 X45.960 Y111.551 E0.01772 ; perimeter
G1 X45.915 Y111.257 E0.01223 ; perimeter
G1 X45.908 Y110.919 E0.01394 ; perimeter
G1 X45.945 Y110.571 E0.01443 ; perimeter
G1 X46.027 Y110.229 E0.01447 ; perimeter
G1 X46.154 Y109.901 E0.01451 ; perimeter
G1 X46.323 Y109.591 E0.01453 ; perimeter
G1 X46.544 Y109.290 E0.01539 ; perimeter
G1 X47.438 Y108.225 E0.05727 ; perimeter
G1 X47.848 Y108.569 E0.02205 ; perimeter
G1 X47.087 Y109.476 E0.04877 ; perimeter
G1 X46.862 Y109.796 E0.01612 ; perimeter
G1 X46.685 Y110.176 E0.01725 ; perimeter
G1 X46.577 Y110.580 E0.01725 ; perimeter
G1 X46.540 Y111.007 E0.01765 ; perimeter
G1 X46.600 Y111.516 E0.02113 ; perimeter
G1 X46.739 Y111.893 E0.01655 ; perimeter
G1 X46.963 Y112.297 E0.01903 ; perimeter
G1 X47.247 Y112.666 E0.01917 ; perimeter
G1 X47.567 Y112.975 E0.01834 ; perimeter
G1 X76.387 Y137.158 E1.54987 ; perimeter
G1 X76.082 Y137.523 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.092 Y138.127 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.956 Y113.679 E1.56687 ; perimeter
G1 X46.582 Y113.329 E0.02109 ; perimeter
G1 X46.255 Y112.949 E0.02063 ; perimeter
G1 X45.977 Y112.542 E0.02031 ; perimeter
G1 X45.751 Y112.117 E0.01984 ; perimeter
G1 X45.574 Y111.652 E0.02048 ; perimeter
G1 X45.519 Y111.292 E0.01502 ; perimeter
G1 X45.511 Y110.902 E0.01605 ; perimeter
G1 X45.553 Y110.503 E0.01655 ; perimeter
G1 X45.648 Y110.111 E0.01661 ; perimeter
G1 X45.794 Y109.734 E0.01666 ; perimeter
G1 X45.988 Y109.378 E0.01669 ; perimeter
G1 X46.232 Y109.045 E0.01701 ; perimeter
G1 X47.389 Y107.667 E0.07413 ; perimeter
G1 X48.406 Y108.520 E0.05471 ; perimeter
G1 X47.402 Y109.717 E0.06438 ; perimeter
G1 X47.207 Y109.995 E0.01398 ; perimeter
G1 X47.059 Y110.312 E0.01439 ; perimeter
G1 X46.969 Y110.649 E0.01439 ; perimeter
G1 X46.938 Y111.001 E0.01453 ; perimeter
G1 X46.988 Y111.423 E0.01753 ; perimeter
G1 X47.100 Y111.728 E0.01336 ; perimeter
G1 X47.295 Y112.079 E0.01654 ; perimeter
G1 X47.544 Y112.401 E0.01678 ; perimeter
G1 X47.833 Y112.681 E0.01657 ; perimeter
G1 X76.945 Y137.110 E1.56561 ; perimeter
G1 X76.130 Y138.081 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.788 Y137.866 F10800.000 ; move inwards before travel
G1 F8640
G1 X73.606 Y135.969 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X150.728 Y114.221 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y113.844 E0.01550 ; perimeter
G1 X151.868 Y113.606 E0.04796 ; perimeter
G1 X151.868 Y113.982 E0.01551 ; perimeter
G1 X150.787 Y114.209 E0.04549 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y114.705 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.332 Y113.522 E0.04871 ; perimeter
G1 X152.264 Y113.105 E0.08143 ; perimeter
G1 X152.264 Y114.299 E0.04916 ; perimeter
G1 X150.390 Y114.693 E0.07887 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y115.189 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.935 Y113.200 E0.08193 ; perimeter
G1 X151.659 Y112.841 E0.07253 ; perimeter
G1 X152.660 Y112.605 E0.04238 ; perimeter
G1 X152.660 Y114.615 E0.08282 ; perimeter
G1 X151.697 Y114.834 E0.04068 ; perimeter
G1 X149.994 Y115.177 E0.07158 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.111 Y114.829 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.935 Y113.200 E-0.45668 ; wipe and retract
G1 X151.221 Y112.932 E-0.30332 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X173.165 Y130.460 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.903 Y115.846 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02205 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X164.820 Y117.532 E0.05690 ; perimeter
G1 X165.164 Y117.942 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.05690 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X171.840 Y125.899 E0.05690 ; perimeter
G1 X172.184 Y126.309 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.05690 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.211 Y130.421 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.116 Y131.018 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.344 Y115.797 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05471 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X164.869 Y116.974 E0.05690 ; perimeter
G1 X165.722 Y117.991 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.05690 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X171.889 Y125.341 E0.05690 ; perimeter
G1 X172.743 Y126.358 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.05690 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.162 Y130.980 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.895 Y130.685 F10800.000 ; move inwards before travel
G1 F8640
G1 X171.039 Y128.465 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y139.253 E0.04011 ; perimeter
G1 X169.775 Y139.253 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.04011 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.462 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.857 E0.06321 ; perimeter
G1 X170.171 Y138.857 E0.21040 ; perimeter
M73 P87 R16
G1 X170.171 Y140.391 E0.06321 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.522 Y140.789 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.298 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y138.460 E0.08630 ; perimeter
G1 X170.567 Y138.460 E0.24306 ; perimeter
G1 X170.567 Y140.555 E0.08630 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.358 Y141.185 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.282 Y140.786 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.667 Y140.555 E-0.21581 ; wipe and retract
G1 X164.667 Y138.460 E-0.48370 ; wipe and retract
G1 X164.929 Y138.460 E-0.06049 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X165.997 Y140.278 ; move to first infill point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.59
G1 X165.776 Y140.057 E0.01631 ; infill
G1 X165.776 Y139.569 E0.02544 ; infill
G1 X165.999 Y139.569 E0.01163 ; infill
G1 X166.506 Y140.077 E0.03747 ; infill
G1 X167.217 Y140.077 E0.03707 ; infill
G1 X166.709 Y139.569 E0.03747 ; infill
G1 X167.419 Y139.569 E0.03707 ; infill
G1 X167.927 Y140.077 E0.03747 ; infill
G1 X168.637 Y140.077 E0.03707 ; infill
G1 X168.129 Y139.569 E0.03747 ; infill
G1 X168.840 Y139.569 E0.03707 ; infill
G1 X169.548 Y140.278 E0.05230 ; infill
G1 F8640
G1 X168.840 Y139.569 E-0.23135 ; wipe and retract
G1 X168.129 Y139.569 E-0.16399 ; wipe and retract
G1 X168.637 Y140.077 E-0.16576 ; wipe and retract
G1 X167.927 Y140.077 E-0.16399 ; wipe and retract
G1 X167.820 Y139.970 E-0.03492 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X173.387 Y137.568 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X173.043 Y137.158 E0.02205 ; perimeter
G1 X201.863 Y112.975 E1.54987 ; perimeter
G1 X202.182 Y112.666 E0.01834 ; perimeter
G1 X202.466 Y112.297 E0.01917 ; perimeter
G1 X202.694 Y111.889 E0.01925 ; perimeter
G1 X202.851 Y111.437 E0.01969 ; perimeter
G1 X202.889 Y110.997 E0.01819 ; perimeter
G1 X202.853 Y110.580 E0.01725 ; perimeter
G1 X202.744 Y110.176 E0.01725 ; perimeter
G1 X202.567 Y109.796 E0.01725 ; perimeter
G1 X202.343 Y109.476 E0.01612 ; perimeter
G1 X201.582 Y108.569 E0.04877 ; perimeter
G1 X201.992 Y108.225 E0.02205 ; perimeter
G1 X202.724 Y109.097 E0.04689 ; perimeter
G1 X203.110 Y109.598 E0.02607 ; perimeter
G1 X203.276 Y109.901 E0.01425 ; perimeter
G1 X203.392 Y110.201 E0.01324 ; perimeter
G1 X203.485 Y110.573 E0.01579 ; perimeter
G1 X203.522 Y110.919 E0.01434 ; perimeter
G1 X203.515 Y111.255 E0.01383 ; perimeter
G1 X203.462 Y111.582 E0.01366 ; perimeter
G1 X203.315 Y111.958 E0.01663 ; perimeter
G1 X203.114 Y112.337 E0.01766 ; perimeter
G1 X202.860 Y112.707 E0.01850 ; perimeter
G1 X202.561 Y113.054 E0.01885 ; perimeter
G1 X202.211 Y113.382 E0.01976 ; perimeter
G1 X173.433 Y137.530 E1.54763 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.338 Y138.127 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X172.484 Y137.110 E0.05471 ; perimeter
G1 X201.597 Y112.681 E1.56561 ; perimeter
G1 X201.886 Y112.401 E0.01657 ; perimeter
G1 X202.134 Y112.079 E0.01678 ; perimeter
G1 X202.331 Y111.726 E0.01662 ; perimeter
G1 X202.460 Y111.354 E0.01625 ; perimeter
G1 X202.491 Y110.997 E0.01473 ; perimeter
G1 X202.461 Y110.649 E0.01439 ; perimeter
G1 X202.370 Y110.312 E0.01439 ; perimeter
G1 X202.223 Y109.995 E0.01439 ; perimeter
G1 X202.028 Y109.717 E0.01398 ; perimeter
G1 X201.024 Y108.520 E0.06438 ; perimeter
G1 X202.041 Y107.667 E0.05471 ; perimeter
G1 X203.033 Y108.848 E0.06356 ; perimeter
G1 X203.443 Y109.381 E0.02769 ; perimeter
G1 X203.636 Y109.734 E0.01658 ; perimeter
G1 X203.771 Y110.081 E0.01533 ; perimeter
G1 X203.876 Y110.504 E0.01795 ; perimeter
G1 X203.919 Y110.902 E0.01652 ; perimeter
G1 X203.910 Y111.291 E0.01601 ; perimeter
G1 X203.846 Y111.687 E0.01654 ; perimeter
M73 Q87 S17
G1 X203.675 Y112.124 E0.01932 ; perimeter
G1 X203.453 Y112.542 E0.01952 ; perimeter
G1 X203.175 Y112.949 E0.02031 ; perimeter
G1 X202.848 Y113.329 E0.02063 ; perimeter
G1 X202.474 Y113.679 E0.02109 ; perimeter
G1 X173.384 Y138.088 E1.56440 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.268 Y137.733 F10800.000 ; move inwards before travel
G1 F8640
G1 X172.484 Y137.110 E-0.30695 ; wipe and retract
G1 X173.987 Y135.848 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X195.805 Y106.489 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X195.461 Y106.079 E0.02205 ; perimeter
G1 X197.827 Y104.094 E0.12723 ; perimeter
G1 X194.416 Y100.029 E0.21861 ; perimeter
G1 X192.050 Y102.014 E0.12723 ; perimeter
G1 X191.706 Y101.604 E0.02205 ; perimeter
G1 X194.072 Y99.619 E0.12723 ; perimeter
G1 X191.623 Y96.700 E0.15696 ; perimeter
G1 X192.033 Y96.356 E0.02205 ; perimeter
G1 X201.030 Y107.078 E0.57663 ; perimeter
G1 X200.620 Y107.422 E0.02205 ; perimeter
G1 X198.171 Y104.504 E0.15696 ; perimeter
G1 X195.851 Y106.451 E0.12476 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.756 Y107.048 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X194.902 Y106.030 E0.05471 ; perimeter
G1 X197.268 Y104.045 E0.12723 ; perimeter
G1 X194.367 Y100.587 E0.18596 ; perimeter
G1 X192.001 Y102.572 E0.12723 ; perimeter
G1 X191.147 Y101.555 E0.05471 ; perimeter
G1 X193.513 Y99.570 E0.12723 ; perimeter
G1 X191.064 Y96.651 E0.15696 ; perimeter
G1 X192.081 Y95.797 E0.05471 ; perimeter
G1 X201.588 Y107.127 E0.60929 ; perimeter
G1 X200.571 Y107.981 E0.05471 ; perimeter
G1 X198.122 Y105.062 E0.15696 ; perimeter
G1 X195.802 Y107.009 E0.12476 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.805 Y106.650 F10800.000 ; move inwards before travel
G1 F8640
G1 X194.902 Y106.030 E-0.30695 ; wipe and retract
G1 X196.405 Y104.769 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
G1 X159.940 Y114.699 ; move to first perimeter point
G1 Z19.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.596 Y114.289 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.16390 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X187.173 Y95.460 E1.04284 ; perimeter
G1 X187.557 Y95.172 E0.01977 ; perimeter
G1 X187.926 Y94.952 E0.01769 ; perimeter
G1 X188.360 Y94.752 E0.01970 ; perimeter
G1 X188.775 Y94.618 E0.01795 ; perimeter
G1 X189.162 Y94.541 E0.01626 ; perimeter
G1 X189.488 Y94.545 E0.01342 ; perimeter
G1 X189.849 Y94.602 E0.01505 ; perimeter
G1 X190.169 Y94.696 E0.01376 ; perimeter
G1 X190.490 Y94.837 E0.01445 ; perimeter
G1 X190.783 Y95.014 E0.01411 ; perimeter
G1 X191.049 Y95.228 E0.01402 ; perimeter
G1 X190.592 Y95.611 E0.02456 ; perimeter
G1 X190.420 Y95.490 E0.00866 ; perimeter
G1 X190.044 Y95.315 E0.01709 ; perimeter
G1 X189.641 Y95.207 E0.01716 ; perimeter
G1 X189.199 Y95.168 E0.01828 ; perimeter
G1 X188.727 Y95.244 E0.01971 ; perimeter
G1 X188.286 Y95.397 E0.01925 ; perimeter
G1 X187.873 Y95.613 E0.01917 ; perimeter
G1 X187.518 Y95.870 E0.01807 ; perimeter
G1 X167.976 Y112.267 E1.05090 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.986 Y114.661 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.892 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.038 Y114.240 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.18617 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X186.926 Y95.149 E1.03734 ; perimeter
G1 X187.336 Y94.842 E0.02109 ; perimeter
G1 X187.741 Y94.601 E0.01944 ; perimeter
G1 X188.216 Y94.383 E0.02152 ; perimeter
G1 X188.674 Y94.234 E0.01986 ; perimeter
G1 X189.125 Y94.144 E0.01894 ; perimeter
G1 X189.522 Y94.149 E0.01633 ; perimeter
G1 X189.935 Y94.215 E0.01726 ; perimeter
G1 X190.305 Y94.323 E0.01586 ; perimeter
G1 X190.673 Y94.485 E0.01658 ; perimeter
G1 X191.010 Y94.689 E0.01622 ; perimeter
G1 X191.314 Y94.931 E0.01599 ; perimeter
G1 X191.621 Y95.265 E0.01870 ; perimeter
G1 X190.597 Y96.124 E0.05505 ; perimeter
G1 X190.514 Y96.040 E0.00486 ; perimeter
G1 X190.221 Y95.835 E0.01476 ; perimeter
G1 X189.908 Y95.689 E0.01423 ; perimeter
G1 X189.572 Y95.599 E0.01432 ; perimeter
G1 X189.214 Y95.567 E0.01482 ; perimeter
G1 X188.824 Y95.630 E0.01625 ; perimeter
G1 X188.443 Y95.762 E0.01662 ; perimeter
G1 X188.082 Y95.951 E0.01677 ; perimeter
G1 X187.762 Y96.183 E0.01631 ; perimeter
G1 X168.120 Y112.663 E1.05625 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X159.938 Y115.219 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.874 Y114.858 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;20


G1 F8640
G1 X159.038 Y114.240 E-0.30695 ; wipe and retract
G1 X160.541 Y112.979 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;20
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y101.107 E0.04011 ; perimeter
G1 X84.255 Y101.107 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.04011 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.253 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.711 E0.06321 ; perimeter
G1 X84.651 Y100.711 E0.21040 ; perimeter
G1 X84.651 Y102.245 E0.06321 ; perimeter
G1 X84.296 Y102.600 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.417 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y100.314 E0.08630 ; perimeter
G1 X85.047 Y100.314 E0.24305 ; perimeter
G1 X85.047 Y102.409 E0.08630 ; perimeter
G1 X84.460 Y102.997 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.087 Y102.814 F10800.000 ; move inwards before travel
G1 F8640
G1 X81.168 Y103.027 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X83.718 Y102.131 ; move to first infill point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.6
G1 X83.939 Y101.910 E0.01632 ; infill
G1 X83.939 Y101.423 E0.02544 ; infill
G1 X83.716 Y101.423 E0.01163 ; infill
G1 X83.208 Y101.931 E0.03747 ; infill
G1 X82.498 Y101.931 E0.03707 ; infill
G1 X83.006 Y101.423 E0.03747 ; infill
G1 X82.295 Y101.423 E0.03707 ; infill
G1 X81.788 Y101.931 E0.03747 ; infill
G1 X81.078 Y101.931 E0.03707 ; infill
G1 X81.585 Y101.423 E0.03747 ; infill
G1 X80.875 Y101.423 E0.03707 ; infill
G1 X80.167 Y102.131 E0.05230 ; infill
G1 F8640
G1 X80.875 Y101.423 E-0.23135 ; wipe and retract
G1 X81.585 Y101.423 E-0.16399 ; wipe and retract
G1 X81.078 Y101.931 E-0.16576 ; wipe and retract
G1 X81.788 Y101.931 E-0.16399 ; wipe and retract
G1 X81.895 Y101.824 E-0.03492 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X76.598 Y92.354 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.02465 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X77.593 Y88.215 E0.05355 ; perimeter
G1 X77.937 Y87.805 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.05355 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X84.613 Y79.848 E0.05355 ; perimeter
G1 X84.957 Y79.438 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.05355 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X88.861 Y77.740 E0.02465 ; perimeter
G1 X76.636 Y92.308 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X76.140 Y91.969 E-0.13884 ; wipe and retract
G1 X77.869 Y89.909 E-0.62116 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X75.581 Y92.018 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X77.034 Y88.264 E0.05355 ; perimeter
G1 X77.888 Y87.247 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.05355 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X84.055 Y79.897 E0.05355 ; perimeter
G1 X84.909 Y78.880 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.05355 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.419 Y77.691 E0.05730 ; perimeter
G1 X76.647 Y92.912 E0.81856 ; perimeter
G1 X75.627 Y92.057 E0.05483 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.845 Y91.718 F10800.000 ; move inwards before travel
G1 F8640
G1 X77.703 Y89.502 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X98.987 Y75.928 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y75.688 E0.04798 ; perimeter
G1 X97.847 Y75.460 E0.00937 ; perimeter
G1 X98.987 Y75.698 E0.04796 ; perimeter
G1 X98.987 Y75.868 E0.00700 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y76.412 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.451 Y76.004 E0.08136 ; perimeter
G1 X97.451 Y74.959 E0.04303 ; perimeter
G1 X99.383 Y75.376 E0.08143 ; perimeter
G1 X99.383 Y76.352 E0.04020 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y76.896 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.109 Y76.560 E0.07020 ; perimeter
G1 X97.055 Y76.320 E0.04455 ; perimeter
G1 X97.055 Y74.459 E0.07669 ; perimeter
G1 X98.029 Y74.689 E0.04124 ; perimeter
G1 X99.780 Y75.054 E0.07367 ; perimeter
G1 X99.780 Y76.836 E0.07341 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.416 Y76.728 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.109 Y76.560 E-0.39095 ; wipe and retract
G1 X97.055 Y76.320 E-0.24968 ; wipe and retract
G1 X97.055 Y75.803 E-0.11937 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X89.774 Y76.553 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.15587 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X62.068 Y57.615 E1.05785 ; perimeter
G1 X61.698 Y57.348 E0.01880 ; perimeter
G1 X61.318 Y57.170 E0.01729 ; perimeter
G1 X60.907 Y57.060 E0.01752 ; perimeter
G1 X60.478 Y57.024 E0.01775 ; perimeter
G1 X60.066 Y57.062 E0.01702 ; perimeter
G1 X59.695 Y57.162 E0.01582 ; perimeter
G1 X59.302 Y57.340 E0.01781 ; perimeter
G1 X59.123 Y57.465 E0.00898 ; perimeter
G1 X58.666 Y57.082 E0.02457 ; perimeter
G1 X58.902 Y56.890 E0.01251 ; perimeter
G1 X59.227 Y56.690 E0.01573 ; perimeter
G1 X59.546 Y56.550 E0.01434 ; perimeter
G1 X59.882 Y56.452 E0.01443 ; perimeter
G1 X60.228 Y56.398 E0.01443 ; perimeter
G1 X60.579 Y56.391 E0.01443 ; perimeter
G1 X60.915 Y56.428 E0.01393 ; perimeter
G1 X61.252 Y56.509 E0.01429 ; perimeter
G1 X61.634 Y56.681 E0.01725 ; perimeter
G1 X62.025 Y56.914 E0.01876 ; perimeter
G1 X62.408 Y57.201 E0.01970 ; perimeter
G1 X81.934 Y73.586 E1.05006 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.118 Y76.143 E0.16390 ; perimeter
G1 X89.813 Y76.507 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.823 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.16626 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X61.824 Y57.928 E1.06320 ; perimeter
G1 X61.496 Y57.691 E0.01666 ; perimeter
G1 X61.182 Y57.544 E0.01432 ; perimeter
G1 X60.839 Y57.452 E0.01461 ; perimeter
G1 X60.480 Y57.422 E0.01485 ; perimeter
G1 X60.136 Y57.454 E0.01421 ; perimeter
G1 X59.829 Y57.536 E0.01309 ; perimeter
G1 X59.499 Y57.686 E0.01494 ; perimeter
G1 X59.196 Y57.899 E0.01527 ; perimeter
G1 X59.117 Y57.977 E0.00458 ; perimeter
G1 X58.093 Y57.118 E0.05509 ; perimeter
G1 X58.373 Y56.810 E0.01715 ; perimeter
G1 X58.672 Y56.566 E0.01590 ; perimeter
G1 X59.043 Y56.338 E0.01792 ; perimeter
G1 X59.410 Y56.176 E0.01654 ; perimeter
G1 X59.796 Y56.064 E0.01657 ; perimeter
G1 X60.194 Y56.003 E0.01657 ; perimeter
G1 X60.596 Y55.994 E0.01657 ; perimeter
G1 X60.983 Y56.036 E0.01604 ; perimeter
G1 X61.381 Y56.132 E0.01687 ; perimeter
G1 X61.817 Y56.329 E0.01971 ; perimeter
G1 X62.246 Y56.584 E0.02056 ; perimeter
G1 X62.654 Y56.891 E0.02102 ; perimeter
G1 X82.078 Y73.189 E1.04455 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X90.677 Y76.094 E0.18617 ; perimeter
G1 X89.862 Y77.065 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.543 Y76.826 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.309 Y74.987 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X53.724 Y68.187 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X51.544 Y66.358 E0.11723 ; perimeter
G1 X49.095 Y69.276 E0.15696 ; perimeter
G1 X48.637 Y68.892 E0.02465 ; perimeter
G1 X57.634 Y58.169 E0.57663 ; perimeter
G1 X58.092 Y58.554 E0.02465 ; perimeter
G1 X55.643 Y61.472 E0.15696 ; perimeter
G1 X57.823 Y63.302 E0.11723 ; perimeter
G1 X57.479 Y63.712 E0.02205 ; perimeter
G1 X55.299 Y61.882 E0.11723 ; perimeter
G1 X51.888 Y65.948 E0.21861 ; perimeter
G1 X54.068 Y67.777 E0.11723 ; perimeter
G1 X53.762 Y68.141 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.773 Y68.745 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X51.593 Y66.916 E0.11723 ; perimeter
G1 X49.144 Y69.835 E0.15696 ; perimeter
G1 X48.078 Y68.941 E0.05730 ; perimeter
G1 X57.585 Y57.611 E0.60929 ; perimeter
G1 X58.651 Y58.505 E0.05730 ; perimeter
G1 X56.202 Y61.424 E0.15696 ; perimeter
G1 X58.382 Y63.253 E0.11723 ; perimeter
G1 X57.528 Y64.270 E0.05471 ; perimeter
G1 X55.348 Y62.441 E0.11723 ; perimeter
G1 X52.446 Y65.899 E0.18596 ; perimeter
G1 X54.626 Y67.728 E0.11723 ; perimeter
G1 X53.811 Y68.699 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.507 Y68.446 F10800.000 ; move inwards before travel
G1 F8640
G1 X51.593 Y66.916 E-0.65720 ; wipe and retract
G1 X51.307 Y67.257 E-0.10280 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X76.137 Y99.262 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.370 Y75.123 E1.54702 ; perimeter
G1 X47.020 Y74.796 E0.01970 ; perimeter
G1 X46.723 Y74.451 E0.01876 ; perimeter
G1 X46.486 Y74.104 E0.01730 ; perimeter
G1 X46.351 Y73.795 E0.01391 ; perimeter
G1 X46.252 Y73.454 E0.01464 ; perimeter
G1 X46.200 Y73.099 E0.01478 ; perimeter
G1 X46.193 Y72.783 E0.01302 ; perimeter
G1 X46.229 Y72.431 E0.01456 ; perimeter
G1 X46.311 Y72.088 E0.01454 ; perimeter
G1 X46.438 Y71.758 E0.01458 ; perimeter
G1 X46.608 Y71.447 E0.01460 ; perimeter
G1 X46.829 Y71.144 E0.01547 ; perimeter
G1 X47.723 Y70.079 E0.05726 ; perimeter
G1 X48.133 Y70.423 E0.02205 ; perimeter
G1 X47.372 Y71.330 E0.04877 ; perimeter
G1 X47.148 Y71.650 E0.01612 ; perimeter
G1 X46.971 Y72.030 E0.01725 ; perimeter
G1 X46.862 Y72.434 E0.01725 ; perimeter
G1 X46.826 Y72.851 E0.01725 ; perimeter
G1 X46.862 Y73.268 E0.01725 ; perimeter
G1 X46.966 Y73.657 E0.01658 ; perimeter
G1 X47.146 Y74.050 E0.01781 ; perimeter
G1 X47.390 Y74.399 E0.01754 ; perimeter
G1 X47.717 Y74.716 E0.01876 ; perimeter
G1 X76.481 Y98.852 E1.54683 ; perimeter
G1 X76.175 Y99.216 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.186 Y99.820 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X47.107 Y75.420 E1.56379 ; perimeter
G1 X46.734 Y75.071 E0.02102 ; perimeter
G1 X46.408 Y74.693 E0.02056 ; perimeter
G1 X46.138 Y74.297 E0.01973 ; perimeter
G1 X45.977 Y73.930 E0.01651 ; perimeter
G1 X45.864 Y73.538 E0.01682 ; perimeter
G1 X45.804 Y73.133 E0.01690 ; perimeter
G1 X45.796 Y72.767 E0.01507 ; perimeter
G1 X45.837 Y72.365 E0.01666 ; perimeter
G1 X45.932 Y71.970 E0.01669 ; perimeter
G1 X46.077 Y71.591 E0.01674 ; perimeter
G1 X46.272 Y71.234 E0.01677 ; perimeter
G1 X46.517 Y70.899 E0.01709 ; perimeter
G1 X47.674 Y69.520 E0.07413 ; perimeter
G1 X48.691 Y70.374 E0.05471 ; perimeter
G1 X47.687 Y71.571 E0.06438 ; perimeter
G1 X47.492 Y71.849 E0.01398 ; perimeter
G1 X47.344 Y72.166 E0.01439 ; perimeter
G1 X47.254 Y72.503 E0.01439 ; perimeter
G1 X47.224 Y72.851 E0.01439 ; perimeter
G1 X47.254 Y73.199 E0.01439 ; perimeter
G1 X47.341 Y73.522 E0.01378 ; perimeter
G1 X47.492 Y73.852 E0.01495 ; perimeter
G1 X47.693 Y74.141 E0.01449 ; perimeter
G1 X47.983 Y74.422 E0.01662 ; perimeter
G1 X77.039 Y98.803 E1.56257 ; perimeter
G1 X76.224 Y99.774 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.882 Y99.559 F10800.000 ; move inwards before travel
G1 F8640
G1 X73.699 Y97.662 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X151.013 Y75.928 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y75.698 E0.00947 ; perimeter
G1 X152.153 Y75.460 E0.04796 ; perimeter
G1 X152.153 Y75.688 E0.00937 ; perimeter
G1 X151.072 Y75.916 E0.04551 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y76.412 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.617 Y75.376 E0.04268 ; perimeter
G1 X152.549 Y74.959 E0.08143 ; perimeter
G1 X152.549 Y76.004 E0.04304 ; perimeter
G1 X150.676 Y76.400 E0.07888 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y76.896 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.220 Y75.054 E0.07589 ; perimeter
G1 X151.971 Y74.689 E0.07367 ; perimeter
G1 X152.945 Y74.459 E0.04124 ; perimeter
G1 X152.945 Y76.320 E0.07670 ; perimeter
G1 X151.891 Y76.560 E0.04455 ; perimeter
G1 X150.279 Y76.884 E0.06772 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.396 Y76.536 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.220 Y75.054 E-0.42283 ; wipe and retract
G1 X151.650 Y74.756 E-0.33717 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X173.402 Y92.354 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X161.139 Y77.740 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.02465 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X165.043 Y79.438 E0.05355 ; perimeter
G1 X165.387 Y79.848 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.05355 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X172.063 Y87.805 E0.05355 ; perimeter
G1 X172.407 Y88.215 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.05355 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.448 Y92.315 E0.02218 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X171.324 Y89.801 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X164.096 Y79.716 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X165.091 Y78.880 E0.05355 ; perimeter
G1 X165.945 Y79.897 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.05355 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X172.112 Y87.247 E0.05355 ; perimeter
G1 X172.966 Y88.264 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.05355 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.353 Y92.912 E0.05730 ; perimeter
G1 X160.581 Y77.691 E0.81856 ; perimeter
G1 X161.647 Y76.797 E0.05730 ; perimeter
G1 X164.057 Y79.670 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X164.387 Y79.990 F10800.000 ; move inwards before travel
G1 F8640
G1 X165.091 Y78.880 E-0.30049 ; wipe and retract
G1 X165.945 Y79.897 E-0.30664 ; wipe and retract
G1 X165.438 Y80.323 E-0.15287 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y101.107 E0.04011 ; perimeter
G1 X170.060 Y101.107 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.04011 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.747 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.711 E0.06321 ; perimeter
G1 X170.456 Y100.711 E0.21040 ; perimeter
G1 X170.456 Y102.245 E0.06321 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.807 Y102.643 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.583 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y100.314 E0.08630 ; perimeter
G1 X170.853 Y100.314 E0.24306 ; perimeter
G1 X170.853 Y102.409 E0.08630 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.643 Y103.039 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.567 Y102.640 F10800.000 ; move inwards before travel
G1 X165.972 Y102.131 ; move to first infill point
G1 F7168.59
G1 X166.680 Y101.423 E0.05230 ; infill
G1 X167.390 Y101.423 E0.03707 ; infill
G1 X166.883 Y101.931 E0.03747 ; infill
G1 X167.593 Y101.931 E0.03707 ; infill
G1 X168.101 Y101.423 E0.03747 ; infill
G1 X168.811 Y101.423 E0.03707 ; infill
G1 X168.303 Y101.931 E0.03747 ; infill
G1 X169.013 Y101.931 E0.03707 ; infill
G1 X169.521 Y101.423 E0.03747 ; infill
G1 X169.744 Y101.423 E0.01163 ; infill
G1 X169.744 Y101.910 E0.02544 ; infill
G1 X169.523 Y102.131 E0.01633 ; infill
G1 F8640
G1 X169.744 Y101.910 E-0.07222 ; wipe and retract
G1 X169.744 Y101.423 E-0.11252 ; wipe and retract
G1 X169.521 Y101.423 E-0.05147 ; wipe and retract
G1 X169.013 Y101.931 E-0.16576 ; wipe and retract
G1 X168.303 Y101.931 E-0.16399 ; wipe and retract
G1 X168.811 Y101.423 E-0.16576 ; wipe and retract
G1 X168.688 Y101.423 E-0.02829 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X173.863 Y99.262 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X173.519 Y98.852 E0.02205 ; perimeter
G1 X202.282 Y74.717 E1.54678 ; perimeter
G1 X202.610 Y74.399 E0.01880 ; perimeter
G1 X202.852 Y74.052 E0.01744 ; perimeter
G1 X203.029 Y73.673 E0.01725 ; perimeter
G1 X203.138 Y73.268 E0.01725 ; perimeter
G1 X203.174 Y72.851 E0.01725 ; perimeter
G1 X203.138 Y72.434 E0.01725 ; perimeter
G1 X203.029 Y72.030 E0.01725 ; perimeter
G1 X202.852 Y71.650 E0.01725 ; perimeter
G1 X202.628 Y71.330 E0.01612 ; perimeter
G1 X201.867 Y70.423 E0.04877 ; perimeter
G1 X202.277 Y70.079 E0.02205 ; perimeter
G1 X203.171 Y71.144 E0.05726 ; perimeter
G1 X203.392 Y71.447 E0.01547 ; perimeter
G1 X203.562 Y71.758 E0.01460 ; perimeter
G1 X203.690 Y72.090 E0.01464 ; perimeter
G1 X203.762 Y72.384 E0.01248 ; perimeter
G1 X203.807 Y72.784 E0.01661 ; perimeter
G1 X203.798 Y73.133 E0.01435 ; perimeter
G1 X203.748 Y73.451 E0.01328 ; perimeter
G1 X203.645 Y73.806 E0.01522 ; perimeter
G1 X203.504 Y74.121 E0.01422 ; perimeter
G1 X203.277 Y74.451 E0.01648 ; perimeter
G1 X202.980 Y74.796 E0.01879 ; perimeter
G1 X202.630 Y75.123 E0.01970 ; perimeter
G1 X173.909 Y99.223 E1.54455 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.814 Y99.820 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X172.961 Y98.803 E0.05471 ; perimeter
G1 X202.016 Y74.422 E1.56252 ; perimeter
G1 X202.307 Y74.141 E0.01666 ; perimeter
G1 X202.508 Y73.853 E0.01446 ; perimeter
G1 X202.656 Y73.537 E0.01439 ; perimeter
G1 X202.746 Y73.199 E0.01439 ; perimeter
G1 X202.776 Y72.851 E0.01439 ; perimeter
G1 X202.746 Y72.503 E0.01439 ; perimeter
G1 X202.656 Y72.166 E0.01439 ; perimeter
G1 X202.508 Y71.849 E0.01439 ; perimeter
G1 X202.313 Y71.571 E0.01398 ; perimeter
G1 X201.309 Y70.374 E0.06438 ; perimeter
G1 X202.326 Y69.520 E0.05471 ; perimeter
G1 X203.483 Y70.899 E0.07413 ; perimeter
G1 X203.728 Y71.234 E0.01709 ; perimeter
G1 X203.923 Y71.591 E0.01677 ; perimeter
G1 X204.069 Y71.971 E0.01676 ; perimeter
G1 X204.152 Y72.314 E0.01455 ; perimeter
G1 X204.204 Y72.767 E0.01879 ; perimeter
G1 X204.193 Y73.168 E0.01653 ; perimeter
G1 X204.136 Y73.537 E0.01538 ; perimeter
G1 X204.018 Y73.943 E0.01741 ; perimeter
G1 X203.851 Y74.315 E0.01681 ; perimeter
G1 X203.592 Y74.693 E0.01885 ; perimeter
G1 X203.266 Y75.071 E0.02057 ; perimeter
G1 X202.893 Y75.420 E0.02103 ; perimeter
G1 X173.860 Y99.781 E1.56131 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.745 Y99.426 F10800.000 ; move inwards before travel
G1 F8640
G1 X172.961 Y98.803 E-0.30695 ; wipe and retract
G1 X174.464 Y97.542 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X196.276 Y68.187 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X195.932 Y67.777 E0.02205 ; perimeter
G1 X198.112 Y65.948 E0.11723 ; perimeter
G1 X194.701 Y61.882 E0.21861 ; perimeter
G1 X192.521 Y63.712 E0.11723 ; perimeter
G1 X192.177 Y63.302 E0.02205 ; perimeter
G1 X194.357 Y61.472 E0.11723 ; perimeter
G1 X191.909 Y58.556 E0.15684 ; perimeter
G1 X192.370 Y58.173 E0.02465 ; perimeter
G1 X201.363 Y68.892 E0.57641 ; perimeter
G1 X200.905 Y69.276 E0.02465 ; perimeter
G1 X198.456 Y66.358 E0.15696 ; perimeter
G1 X196.322 Y68.148 E0.11476 ; perimeter
M204 S1000 ; adjust acceleration
G1 X196.227 Y68.745 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X195.374 Y67.728 E0.05471 ; perimeter
G1 X197.554 Y65.899 E0.11723 ; perimeter
G1 X194.652 Y62.441 E0.18596 ; perimeter
G1 X192.472 Y64.270 E0.11723 ; perimeter
G1 X191.619 Y63.253 E0.05471 ; perimeter
G1 X193.798 Y61.424 E0.11723 ; perimeter
G1 X191.350 Y58.506 E0.15691 ; perimeter
G1 X192.419 Y57.616 E0.05730 ; perimeter
G1 X201.922 Y68.941 E0.60899 ; perimeter
G1 X200.856 Y69.835 E0.05730 ; perimeter
G1 X198.407 Y66.916 E0.15696 ; perimeter
G1 X196.273 Y68.707 E0.11476 ; perimeter
M204 S1000 ; adjust acceleration
G1 X196.281 Y68.349 F10800.000 ; move inwards before travel
G1 F8640
G1 X195.374 Y67.728 E-0.30695 ; wipe and retract
G1 X196.877 Y66.467 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X160.226 Y76.553 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.882 Y76.143 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.16390 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X187.592 Y57.201 E1.05006 ; perimeter
G1 X187.975 Y56.914 E0.01970 ; perimeter
G1 X188.367 Y56.681 E0.01879 ; perimeter
G1 X188.731 Y56.515 E0.01648 ; perimeter
G1 X189.073 Y56.429 E0.01452 ; perimeter
G1 X189.444 Y56.391 E0.01536 ; perimeter
G1 X189.772 Y56.398 E0.01351 ; perimeter
G1 X190.118 Y56.452 E0.01443 ; perimeter
G1 X190.454 Y56.550 E0.01443 ; perimeter
G1 X190.775 Y56.691 E0.01445 ; perimeter
G1 X191.064 Y56.865 E0.01388 ; perimeter
G1 X191.333 Y57.082 E0.01424 ; perimeter
G1 X190.877 Y57.465 E0.02452 ; perimeter
G1 X190.698 Y57.340 E0.00898 ; perimeter
G1 X190.305 Y57.162 E0.01781 ; perimeter
G1 X189.934 Y57.062 E0.01582 ; perimeter
G1 X189.522 Y57.024 E0.01702 ; perimeter
G1 X189.093 Y57.060 E0.01775 ; perimeter
G1 X188.682 Y57.170 E0.01752 ; perimeter
G1 X188.302 Y57.348 E0.01729 ; perimeter
G1 X187.933 Y57.614 E0.01876 ; perimeter
G1 X168.261 Y74.121 E1.05789 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X160.272 Y76.514 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.177 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.323 Y76.094 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.18617 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X187.346 Y56.891 E1.04455 ; perimeter
G1 X187.754 Y56.584 E0.02102 ; perimeter
G1 X188.183 Y56.329 E0.02057 ; perimeter
G1 X188.600 Y56.140 E0.01885 ; perimeter
G1 X189.004 Y56.038 E0.01718 ; perimeter
G1 X189.428 Y55.995 E0.01755 ; perimeter
G1 X189.806 Y56.003 E0.01559 ; perimeter
G1 X190.204 Y56.064 E0.01657 ; perimeter
G1 X190.590 Y56.176 E0.01657 ; perimeter
G1 X190.958 Y56.338 E0.01658 ; perimeter
G1 X191.290 Y56.539 E0.01598 ; perimeter
G1 X191.589 Y56.776 E0.01571 ; perimeter
G1 X191.906 Y57.119 E0.01924 ; perimeter
G1 X190.883 Y57.977 E0.05501 ; perimeter
G1 X190.804 Y57.899 E0.00458 ; perimeter
G1 X190.501 Y57.686 E0.01527 ; perimeter
G1 X190.171 Y57.536 E0.01494 ; perimeter
G1 X189.864 Y57.454 E0.01309 ; perimeter
G1 X189.520 Y57.422 E0.01421 ; perimeter
G1 X189.161 Y57.452 E0.01485 ; perimeter
G1 X188.818 Y57.544 E0.01461 ; perimeter
G1 X188.504 Y57.691 E0.01432 ; perimeter
G1 X188.177 Y57.927 E0.01662 ; perimeter
G1 X168.405 Y74.517 E1.06324 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X160.223 Y77.073 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.159 Y76.712 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.323 Y76.094 E-0.30695 ; wipe and retract
G1 X160.826 Y74.833 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y139.253 E0.04011 ; perimeter
G1 X83.970 Y139.253 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.04011 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.968 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.857 E0.06321 ; perimeter
G1 X84.366 Y138.857 E0.21040 ; perimeter
G1 X84.366 Y140.391 E0.06321 ; perimeter
G1 X84.010 Y140.747 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.132 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y138.460 E0.08630 ; perimeter
G1 X84.762 Y138.460 E0.24305 ; perimeter
G1 X84.762 Y140.555 E0.08630 ; perimeter
G1 X84.175 Y141.143 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.802 Y140.960 F10800.000 ; move inwards before travel
G1 F8640
G1 X80.883 Y141.173 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X83.432 Y140.278 ; move to first infill point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.6
G1 X83.654 Y140.056 E0.01632 ; infill
G1 X83.654 Y139.569 E0.02544 ; infill
G1 X83.431 Y139.569 E0.01163 ; infill
G1 X82.923 Y140.077 E0.03747 ; infill
G1 X82.213 Y140.077 E0.03707 ; infill
G1 X82.720 Y139.569 E0.03747 ; infill
G1 X82.010 Y139.569 E0.03707 ; infill
G1 X81.503 Y140.077 E0.03747 ; infill
G1 X80.792 Y140.077 E0.03707 ; infill
G1 X81.300 Y139.569 E0.03747 ; infill
G1 X80.590 Y139.569 E0.03707 ; infill
G1 X79.881 Y140.278 E0.05230 ; infill
G1 F8640
G1 X80.590 Y139.569 E-0.23135 ; wipe and retract
G1 X81.300 Y139.569 E-0.16399 ; wipe and retract
G1 X80.792 Y140.077 E-0.16576 ; wipe and retract
G1 X81.503 Y140.077 E-0.16399 ; wipe and retract
G1 X81.610 Y139.970 E-0.03492 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X76.313 Y130.500 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.02465 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X77.308 Y126.361 E0.05355 ; perimeter
G1 X77.652 Y125.951 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.05355 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X84.328 Y117.995 E0.05355 ; perimeter
G1 X84.672 Y117.585 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.05355 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.575 Y115.886 E0.02465 ; perimeter
G1 X76.351 Y130.454 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X75.854 Y130.116 E-0.13884 ; wipe and retract
G1 X77.584 Y128.055 E-0.62116 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X75.296 Y130.164 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X76.749 Y126.410 E0.05355 ; perimeter
G1 X77.603 Y125.393 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.05355 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X83.770 Y118.043 E0.05355 ; perimeter
G1 X84.623 Y117.026 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.05355 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.134 Y115.837 E0.05730 ; perimeter
G1 X76.362 Y131.059 E0.81856 ; perimeter
G1 X75.342 Y130.203 E0.05483 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.560 Y129.864 F10800.000 ; move inwards before travel
G1 F8640
G1 X77.418 Y127.649 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X98.702 Y114.074 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y113.834 E0.04798 ; perimeter
G1 X97.562 Y113.606 E0.00937 ; perimeter
G1 X98.702 Y113.844 E0.04796 ; perimeter
G1 X98.702 Y114.014 E0.00700 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y114.558 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.166 Y114.150 E0.08136 ; perimeter
G1 X97.166 Y113.106 E0.04303 ; perimeter
G1 X99.098 Y113.522 E0.08143 ; perimeter
G1 X99.098 Y114.498 E0.04020 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y115.042 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.824 Y114.706 E0.07020 ; perimeter
G1 X96.769 Y114.467 E0.04455 ; perimeter
G1 X96.769 Y112.605 E0.07669 ; perimeter
G1 X97.744 Y112.835 E0.04124 ; perimeter
G1 X99.494 Y113.200 E0.07367 ; perimeter
G1 X99.494 Y114.982 E0.07341 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.131 Y114.874 F10800.000 ; move inwards before travel
G1 F8640
G1 X97.824 Y114.706 E-0.39095 ; wipe and retract
G1 X96.769 Y114.467 E-0.24968 ; wipe and retract
G1 X96.769 Y113.950 E-0.11937 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X89.489 Y114.699 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.15587 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
M73 P88 R15
G1 X61.783 Y95.761 E1.05785 ; perimeter
G1 X61.413 Y95.494 E0.01880 ; perimeter
G1 X61.033 Y95.316 E0.01729 ; perimeter
G1 X60.622 Y95.206 E0.01752 ; perimeter
G1 X60.193 Y95.171 E0.01775 ; perimeter
G1 X59.781 Y95.208 E0.01702 ; perimeter
G1 X59.410 Y95.308 E0.01582 ; perimeter
G1 X59.016 Y95.486 E0.01781 ; perimeter
G1 X58.838 Y95.611 E0.00898 ; perimeter
G1 X58.381 Y95.228 E0.02457 ; perimeter
G1 X58.617 Y95.036 E0.01251 ; perimeter
G1 X58.942 Y94.836 E0.01573 ; perimeter
G1 X59.261 Y94.696 E0.01434 ; perimeter
G1 X59.597 Y94.598 E0.01443 ; perimeter
G1 X59.943 Y94.545 E0.01443 ; perimeter
G1 X60.294 Y94.537 E0.01443 ; perimeter
G1 X60.630 Y94.574 E0.01393 ; perimeter
G1 X60.967 Y94.655 E0.01429 ; perimeter
G1 X61.349 Y94.827 E0.01725 ; perimeter
G1 X61.740 Y95.060 E0.01876 ; perimeter
G1 X62.123 Y95.347 E0.01970 ; perimeter
G1 X81.649 Y111.732 E1.05006 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X89.833 Y114.289 E0.16390 ; perimeter
G1 X89.528 Y114.653 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.538 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.16626 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X61.539 Y96.074 E1.06320 ; perimeter
G1 X61.211 Y95.837 E0.01666 ; perimeter
G1 X60.896 Y95.690 E0.01432 ; perimeter
G1 X60.554 Y95.598 E0.01461 ; perimeter
G1 X60.195 Y95.568 E0.01485 ; perimeter
G1 X59.851 Y95.600 E0.01421 ; perimeter
G1 X59.544 Y95.682 E0.01309 ; perimeter
G1 X59.214 Y95.832 E0.01494 ; perimeter
G1 X58.910 Y96.045 E0.01527 ; perimeter
G1 X58.832 Y96.124 E0.00458 ; perimeter
G1 X57.808 Y95.264 E0.05509 ; perimeter
G1 X58.087 Y94.956 E0.01715 ; perimeter
G1 X58.387 Y94.712 E0.01590 ; perimeter
G1 X58.757 Y94.484 E0.01792 ; perimeter
G1 X59.125 Y94.323 E0.01654 ; perimeter
G1 X59.511 Y94.210 E0.01657 ; perimeter
G1 X59.909 Y94.149 E0.01657 ; perimeter
G1 X60.311 Y94.140 E0.01657 ; perimeter
G1 X60.698 Y94.183 E0.01604 ; perimeter
G1 X61.096 Y94.278 E0.01687 ; perimeter
G1 X61.532 Y94.475 E0.01971 ; perimeter
G1 X61.961 Y94.730 E0.02056 ; perimeter
G1 X62.369 Y95.037 E0.02102 ; perimeter
G1 X81.793 Y111.335 E1.04455 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X90.392 Y114.240 E0.18617 ; perimeter
G1 X89.577 Y115.212 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.257 Y114.972 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.024 Y113.134 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X53.439 Y106.333 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q88 S16
M204 S800 ; adjust acceleration
G1 F2400
G1 X51.259 Y104.504 E0.11723 ; perimeter
G1 X48.810 Y107.422 E0.15696 ; perimeter
G1 X48.351 Y107.038 E0.02465 ; perimeter
G1 X57.349 Y96.315 E0.57663 ; perimeter
G1 X57.807 Y96.700 E0.02465 ; perimeter
G1 X55.358 Y99.619 E0.15696 ; perimeter
G1 X57.538 Y101.448 E0.11723 ; perimeter
G1 X57.194 Y101.858 E0.02205 ; perimeter
G1 X55.014 Y100.029 E0.11723 ; perimeter
G1 X51.603 Y104.094 E0.21861 ; perimeter
G1 X53.783 Y105.923 E0.11723 ; perimeter
G1 X53.477 Y106.287 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.488 Y106.891 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X51.308 Y105.062 E0.11723 ; perimeter
G1 X48.859 Y107.981 E0.15696 ; perimeter
G1 X47.793 Y107.087 E0.05730 ; perimeter
G1 X57.300 Y95.757 E0.60929 ; perimeter
G1 X58.365 Y96.651 E0.05730 ; perimeter
G1 X55.916 Y99.570 E0.15696 ; perimeter
G1 X58.096 Y101.399 E0.11723 ; perimeter
G1 X57.243 Y102.416 E0.05471 ; perimeter
G1 X55.063 Y100.587 E0.11723 ; perimeter
G1 X52.161 Y104.045 E0.18596 ; perimeter
G1 X54.341 Y105.874 E0.11723 ; perimeter
G1 X53.526 Y106.845 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X53.222 Y106.593 F10800.000 ; move inwards before travel
G1 F8640
G1 X51.308 Y105.062 E-0.65720 ; wipe and retract
G1 X51.022 Y105.403 E-0.10280 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X75.852 Y137.408 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.084 Y113.269 E1.54702 ; perimeter
G1 X46.735 Y112.943 E0.01970 ; perimeter
G1 X46.438 Y112.597 E0.01876 ; perimeter
G1 X46.201 Y112.251 E0.01730 ; perimeter
G1 X46.066 Y111.942 E0.01391 ; perimeter
G1 X45.967 Y111.600 E0.01464 ; perimeter
G1 X45.914 Y111.245 E0.01478 ; perimeter
G1 X45.907 Y110.929 E0.01302 ; perimeter
G1 X45.944 Y110.578 E0.01456 ; perimeter
G1 X46.026 Y110.234 E0.01454 ; perimeter
G1 X46.153 Y109.904 E0.01458 ; perimeter
G1 X46.322 Y109.593 E0.01460 ; perimeter
G1 X46.544 Y109.290 E0.01547 ; perimeter
G1 X47.438 Y108.225 E0.05726 ; perimeter
G1 X47.848 Y108.569 E0.02205 ; perimeter
G1 X47.087 Y109.476 E0.04877 ; perimeter
G1 X46.862 Y109.796 E0.01612 ; perimeter
G1 X46.685 Y110.176 E0.01725 ; perimeter
G1 X46.577 Y110.580 E0.01725 ; perimeter
G1 X46.541 Y110.997 E0.01725 ; perimeter
G1 X46.577 Y111.414 E0.01725 ; perimeter
G1 X46.681 Y111.803 E0.01658 ; perimeter
G1 X46.861 Y112.196 E0.01781 ; perimeter
G1 X47.105 Y112.545 E0.01754 ; perimeter
G1 X47.432 Y112.862 E0.01876 ; perimeter
G1 X76.196 Y136.998 E1.54683 ; perimeter
G1 X75.890 Y137.362 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.900 Y137.966 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.821 Y113.566 E1.56379 ; perimeter
G1 X46.449 Y113.217 E0.02102 ; perimeter
G1 X46.123 Y112.839 E0.02056 ; perimeter
G1 X45.853 Y112.444 E0.01973 ; perimeter
G1 X45.692 Y112.077 E0.01651 ; perimeter
G1 X45.579 Y111.684 E0.01682 ; perimeter
G1 X45.519 Y111.279 E0.01690 ; perimeter
G1 X45.511 Y110.913 E0.01507 ; perimeter
G1 X45.552 Y110.511 E0.01666 ; perimeter
G1 X45.646 Y110.117 E0.01669 ; perimeter
G1 X45.792 Y109.737 E0.01674 ; perimeter
G1 X45.987 Y109.380 E0.01677 ; perimeter
G1 X46.232 Y109.045 E0.01709 ; perimeter
G1 X47.389 Y107.667 E0.07413 ; perimeter
G1 X48.406 Y108.520 E0.05471 ; perimeter
G1 X47.402 Y109.717 E0.06438 ; perimeter
G1 X47.207 Y109.995 E0.01398 ; perimeter
G1 X47.059 Y110.312 E0.01439 ; perimeter
G1 X46.969 Y110.649 E0.01439 ; perimeter
G1 X46.938 Y110.997 E0.01439 ; perimeter
G1 X46.969 Y111.345 E0.01439 ; perimeter
G1 X47.055 Y111.668 E0.01378 ; perimeter
G1 X47.206 Y111.999 E0.01495 ; perimeter
G1 X47.408 Y112.287 E0.01449 ; perimeter
G1 X47.698 Y112.568 E0.01662 ; perimeter
G1 X76.754 Y136.949 E1.56257 ; perimeter
G1 X75.939 Y137.920 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.597 Y137.705 F10800.000 ; move inwards before travel
G1 F8640
G1 X73.414 Y135.808 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X150.728 Y114.074 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y113.844 E0.00947 ; perimeter
G1 X151.868 Y113.606 E0.04796 ; perimeter
G1 X151.868 Y113.834 E0.00937 ; perimeter
G1 X150.787 Y114.062 E0.04551 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y114.558 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.332 Y113.522 E0.04268 ; perimeter
G1 X152.264 Y113.106 E0.08143 ; perimeter
G1 X152.264 Y114.150 E0.04304 ; perimeter
G1 X150.390 Y114.546 E0.07888 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y115.042 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.935 Y113.200 E0.07589 ; perimeter
G1 X151.686 Y112.835 E0.07367 ; perimeter
G1 X152.660 Y112.605 E0.04124 ; perimeter
G1 X152.660 Y114.467 E0.07670 ; perimeter
G1 X151.606 Y114.706 E0.04455 ; perimeter
G1 X149.994 Y115.030 E0.06772 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.111 Y114.682 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.935 Y113.200 E-0.42283 ; wipe and retract
G1 X151.365 Y112.902 E-0.33717 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X173.117 Y130.500 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.854 Y115.886 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.02465 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X164.757 Y117.585 E0.05355 ; perimeter
G1 X165.102 Y117.995 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.05355 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X171.778 Y125.951 E0.05355 ; perimeter
G1 X172.122 Y126.361 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.05355 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X173.163 Y130.462 E0.02218 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X171.039 Y127.947 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X163.810 Y117.862 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X164.806 Y117.026 E0.05355 ; perimeter
G1 X165.660 Y118.043 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.05355 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X171.827 Y125.393 E0.05355 ; perimeter
G1 X172.680 Y126.410 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.05355 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.068 Y131.059 E0.05730 ; perimeter
G1 X160.296 Y115.837 E0.81856 ; perimeter
G1 X161.361 Y114.943 E0.05730 ; perimeter
G1 X163.772 Y117.816 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X164.101 Y118.136 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.806 Y117.026 E-0.30049 ; wipe and retract
G1 X165.660 Y118.043 E-0.30664 ; wipe and retract
G1 X165.153 Y118.469 E-0.15287 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y139.253 E0.04011 ; perimeter
G1 X169.775 Y139.253 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.04011 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.462 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.857 E0.06321 ; perimeter
G1 X170.171 Y138.857 E0.21040 ; perimeter
G1 X170.171 Y140.391 E0.06321 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.522 Y140.789 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.298 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y138.460 E0.08630 ; perimeter
G1 X170.567 Y138.460 E0.24306 ; perimeter
G1 X170.567 Y140.555 E0.08630 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.358 Y141.185 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.282 Y140.786 F10800.000 ; move inwards before travel
G1 X165.686 Y140.278 ; move to first infill point
G1 F7168.59
G1 X166.395 Y139.569 E0.05230 ; infill
G1 X167.105 Y139.569 E0.03707 ; infill
G1 X166.598 Y140.077 E0.03747 ; infill
G1 X167.308 Y140.077 E0.03707 ; infill
G1 X167.815 Y139.569 E0.03747 ; infill
G1 X168.526 Y139.569 E0.03707 ; infill
G1 X168.018 Y140.077 E0.03747 ; infill
G1 X168.728 Y140.077 E0.03707 ; infill
G1 X169.236 Y139.569 E0.03747 ; infill
G1 X169.459 Y139.569 E0.01163 ; infill
G1 X169.459 Y140.056 E0.02544 ; infill
G1 X169.238 Y140.278 E0.01633 ; infill
G1 F8640
G1 X169.459 Y140.056 E-0.07222 ; wipe and retract
G1 X169.459 Y139.569 E-0.11252 ; wipe and retract
G1 X169.236 Y139.569 E-0.05147 ; wipe and retract
G1 X168.728 Y140.077 E-0.16576 ; wipe and retract
G1 X168.018 Y140.077 E-0.16399 ; wipe and retract
G1 X168.526 Y139.569 E-0.16576 ; wipe and retract
G1 X168.403 Y139.569 E-0.02829 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X173.578 Y137.408 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X173.234 Y136.998 E0.02205 ; perimeter
G1 X201.997 Y112.863 E1.54678 ; perimeter
G1 X202.324 Y112.545 E0.01880 ; perimeter
G1 X202.567 Y112.198 E0.01744 ; perimeter
G1 X202.744 Y111.819 E0.01725 ; perimeter
G1 X202.853 Y111.414 E0.01725 ; perimeter
G1 X202.889 Y110.997 E0.01725 ; perimeter
G1 X202.853 Y110.580 E0.01725 ; perimeter
G1 X202.744 Y110.176 E0.01725 ; perimeter
G1 X202.567 Y109.796 E0.01725 ; perimeter
G1 X202.343 Y109.476 E0.01612 ; perimeter
G1 X201.582 Y108.569 E0.04877 ; perimeter
G1 X201.992 Y108.225 E0.02205 ; perimeter
G1 X202.885 Y109.290 E0.05726 ; perimeter
G1 X203.107 Y109.593 E0.01547 ; perimeter
G1 X203.277 Y109.904 E0.01460 ; perimeter
G1 X203.404 Y110.236 E0.01464 ; perimeter
G1 X203.476 Y110.530 E0.01248 ; perimeter
G1 X203.522 Y110.931 E0.01661 ; perimeter
G1 X203.512 Y111.279 E0.01435 ; perimeter
G1 X203.463 Y111.597 E0.01328 ; perimeter
G1 X203.360 Y111.952 E0.01522 ; perimeter
G1 X203.219 Y112.267 E0.01422 ; perimeter
G1 X202.992 Y112.597 E0.01648 ; perimeter
G1 X202.695 Y112.943 E0.01879 ; perimeter
G1 X202.345 Y113.269 E0.01970 ; perimeter
G1 X173.624 Y137.369 E1.54455 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.529 Y137.966 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X172.676 Y136.949 E0.05471 ; perimeter
G1 X201.731 Y112.568 E1.56252 ; perimeter
G1 X202.021 Y112.287 E0.01666 ; perimeter
G1 X202.223 Y111.999 E0.01446 ; perimeter
G1 X202.370 Y111.683 E0.01439 ; perimeter
G1 X202.461 Y111.345 E0.01439 ; perimeter
G1 X202.491 Y110.997 E0.01439 ; perimeter
G1 X202.461 Y110.649 E0.01439 ; perimeter
G1 X202.370 Y110.312 E0.01439 ; perimeter
G1 X202.223 Y109.995 E0.01439 ; perimeter
G1 X202.028 Y109.717 E0.01398 ; perimeter
G1 X201.024 Y108.520 E0.06438 ; perimeter
G1 X202.041 Y107.667 E0.05471 ; perimeter
G1 X203.198 Y109.045 E0.07413 ; perimeter
G1 X203.443 Y109.380 E0.01709 ; perimeter
G1 X203.637 Y109.737 E0.01677 ; perimeter
G1 X203.783 Y110.117 E0.01676 ; perimeter
G1 X203.867 Y110.460 E0.01455 ; perimeter
G1 X203.919 Y110.914 E0.01879 ; perimeter
G1 X203.908 Y111.315 E0.01653 ; perimeter
G1 X203.851 Y111.683 E0.01538 ; perimeter
G1 X203.733 Y112.089 E0.01741 ; perimeter
G1 X203.566 Y112.462 E0.01681 ; perimeter
G1 X203.307 Y112.839 E0.01885 ; perimeter
G1 X202.981 Y113.217 E0.02057 ; perimeter
G1 X202.608 Y113.566 E0.02103 ; perimeter
G1 X173.575 Y137.928 E1.56131 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.460 Y137.572 F10800.000 ; move inwards before travel
G1 F8640
G1 X172.676 Y136.949 E-0.30695 ; wipe and retract
G1 X174.179 Y135.688 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X195.991 Y106.333 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X195.647 Y105.923 E0.02205 ; perimeter
G1 X197.827 Y104.094 E0.11723 ; perimeter
G1 X194.416 Y100.029 E0.21861 ; perimeter
G1 X192.236 Y101.858 E0.11723 ; perimeter
G1 X191.892 Y101.448 E0.02205 ; perimeter
G1 X194.072 Y99.619 E0.11723 ; perimeter
G1 X191.624 Y96.702 E0.15684 ; perimeter
G1 X192.084 Y96.319 E0.02465 ; perimeter
G1 X201.078 Y107.038 E0.57641 ; perimeter
G1 X200.620 Y107.422 E0.02465 ; perimeter
G1 X198.171 Y104.504 E0.15696 ; perimeter
G1 X196.037 Y106.294 E0.11476 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.942 Y106.891 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X195.088 Y105.874 E0.05471 ; perimeter
G1 X197.268 Y104.045 E0.11723 ; perimeter
G1 X194.367 Y100.587 E0.18596 ; perimeter
G1 X192.187 Y102.416 E0.11723 ; perimeter
G1 X191.333 Y101.399 E0.05471 ; perimeter
G1 X193.513 Y99.570 E0.11723 ; perimeter
G1 X191.065 Y96.652 E0.15691 ; perimeter
G1 X192.134 Y95.762 E0.05730 ; perimeter
G1 X201.637 Y107.087 E0.60899 ; perimeter
G1 X200.571 Y107.981 E0.05730 ; perimeter
G1 X198.122 Y105.062 E0.15696 ; perimeter
G1 X195.988 Y106.853 E0.11476 ; perimeter
M204 S1000 ; adjust acceleration
G1 X195.996 Y106.495 F10800.000 ; move inwards before travel
G1 F8640
G1 X195.088 Y105.874 E-0.30695 ; wipe and retract
G1 X196.592 Y104.613 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
G1 X159.940 Y114.699 ; move to first perimeter point
G1 Z20.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.596 Y114.289 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.16390 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X187.307 Y95.347 E1.05006 ; perimeter
G1 X187.689 Y95.060 E0.01970 ; perimeter
G1 X188.082 Y94.827 E0.01879 ; perimeter
G1 X188.446 Y94.661 E0.01648 ; perimeter
G1 X188.788 Y94.576 E0.01452 ; perimeter
G1 X189.159 Y94.537 E0.01536 ; perimeter
G1 X189.486 Y94.545 E0.01351 ; perimeter
G1 X189.833 Y94.598 E0.01443 ; perimeter
G1 X190.169 Y94.696 E0.01443 ; perimeter
G1 X190.490 Y94.837 E0.01445 ; perimeter
G1 X190.779 Y95.011 E0.01388 ; perimeter
G1 X191.048 Y95.229 E0.01424 ; perimeter
G1 X190.592 Y95.611 E0.02452 ; perimeter
G1 X190.413 Y95.486 E0.00898 ; perimeter
G1 X190.019 Y95.308 E0.01781 ; perimeter
G1 X189.648 Y95.208 E0.01582 ; perimeter
G1 X189.237 Y95.171 E0.01702 ; perimeter
G1 X188.808 Y95.206 E0.01775 ; perimeter
G1 X188.397 Y95.316 E0.01752 ; perimeter
G1 X188.017 Y95.494 E0.01729 ; perimeter
G1 X187.648 Y95.760 E0.01876 ; perimeter
G1 X167.976 Y112.267 E1.05789 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.986 Y114.661 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.892 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.038 Y114.240 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.18617 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X187.061 Y95.037 E1.04455 ; perimeter
G1 X187.469 Y94.730 E0.02102 ; perimeter
G1 X187.898 Y94.475 E0.02057 ; perimeter
G1 X188.314 Y94.286 E0.01885 ; perimeter
G1 X188.719 Y94.184 E0.01718 ; perimeter
G1 X189.143 Y94.141 E0.01755 ; perimeter
G1 X189.521 Y94.149 E0.01559 ; perimeter
G1 X189.919 Y94.210 E0.01657 ; perimeter
G1 X190.305 Y94.323 E0.01657 ; perimeter
G1 X190.673 Y94.485 E0.01658 ; perimeter
G1 X191.005 Y94.685 E0.01598 ; perimeter
G1 X191.304 Y94.922 E0.01571 ; perimeter
G1 X191.621 Y95.265 E0.01924 ; perimeter
G1 X190.598 Y96.124 E0.05501 ; perimeter
G1 X190.519 Y96.045 E0.00458 ; perimeter
G1 X190.216 Y95.832 E0.01527 ; perimeter
G1 X189.886 Y95.682 E0.01494 ; perimeter
G1 X189.579 Y95.600 E0.01309 ; perimeter
G1 X189.235 Y95.568 E0.01421 ; perimeter
G1 X188.876 Y95.598 E0.01485 ; perimeter
G1 X188.533 Y95.690 E0.01461 ; perimeter
G1 X188.218 Y95.837 E0.01432 ; perimeter
G1 X187.891 Y96.073 E0.01662 ; perimeter
G1 X168.120 Y112.663 E1.06324 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X159.938 Y115.219 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.874 Y114.858 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;20.25


G1 F8640
G1 X159.038 Y114.240 E-0.30695 ; wipe and retract
G1 X160.541 Y112.979 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;20.25
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y101.107 E0.04011 ; perimeter
G1 X84.255 Y101.107 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.04011 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.253 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.711 E0.06321 ; perimeter
G1 X84.651 Y100.711 E0.21040 ; perimeter
G1 X84.651 Y102.245 E0.06321 ; perimeter
G1 X84.296 Y102.600 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.417 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y100.314 E0.08630 ; perimeter
G1 X85.047 Y100.314 E0.24305 ; perimeter
G1 X85.047 Y102.409 E0.08630 ; perimeter
G1 X84.460 Y102.997 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.087 Y102.814 F10800.000 ; move inwards before travel
G1 X84.028 Y102.131 ; move to first infill point
G1 F7168.6
G1 X83.320 Y101.423 E0.05230 ; infill
G1 X82.610 Y101.423 E0.03707 ; infill
G1 X83.117 Y101.931 E0.03747 ; infill
G1 X82.407 Y101.931 E0.03707 ; infill
G1 X81.899 Y101.423 E0.03747 ; infill
G1 X81.189 Y101.423 E0.03707 ; infill
G1 X81.697 Y101.931 E0.03747 ; infill
G1 X80.987 Y101.931 E0.03707 ; infill
G1 X80.479 Y101.423 E0.03747 ; infill
G1 X80.256 Y101.423 E0.01163 ; infill
G1 X80.256 Y101.910 E0.02544 ; infill
G1 X80.477 Y102.131 E0.01631 ; infill
G1 F8640
G1 X80.256 Y101.910 E-0.07217 ; wipe and retract
G1 X80.256 Y101.423 E-0.11255 ; wipe and retract
G1 X80.479 Y101.423 E-0.05143 ; wipe and retract
G1 X80.987 Y101.931 E-0.16576 ; wipe and retract
G1 X81.697 Y101.931 E-0.16399 ; wipe and retract
G1 X81.189 Y101.423 E-0.16576 ; wipe and retract
G1 X81.312 Y101.423 E-0.02834 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X76.741 Y91.956 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X76.698 Y91.921 E0.00229 ; perimeter
G1 X88.451 Y77.914 E0.75325 ; perimeter
G1 X88.494 Y77.950 E0.00229 ; perimeter
G1 X76.779 Y91.910 E0.75078 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.789 Y92.515 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.140 Y91.969 E0.03495 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X77.655 Y88.267 E0.05021 ; perimeter
G1 X77.999 Y87.857 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.05021 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X84.676 Y79.901 E0.05021 ; perimeter
G1 X85.020 Y79.491 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.05021 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X89.052 Y77.901 E0.03495 ; perimeter
G1 X76.828 Y92.469 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X76.140 Y91.969 E-0.19636 ; wipe and retract
G1 X77.709 Y90.100 E-0.56364 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X75.581 Y92.018 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X77.097 Y88.316 E0.05021 ; perimeter
G1 X77.950 Y87.299 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.05021 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X84.117 Y79.950 E0.05021 ; perimeter
G1 X84.971 Y78.932 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.05021 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.472 Y77.735 E0.06014 ; perimeter
G1 X89.494 Y77.991 E0.01056 ; perimeter
G1 X76.955 Y92.934 E0.80363 ; perimeter
G1 X76.699 Y92.957 E0.01056 ; perimeter
G1 X75.627 Y92.057 E0.05767 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.952 Y91.868 F10800.000 ; move inwards before travel
G1 F8640
G1 X77.703 Y89.502 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X98.987 Y75.781 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.847 Y75.539 E0.04800 ; perimeter
G1 X97.847 Y75.460 E0.00325 ; perimeter
G1 X98.987 Y75.698 E0.04796 ; perimeter
G1 X98.987 Y75.721 E0.00097 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.383 Y76.265 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.451 Y75.856 E0.08137 ; perimeter
G1 X97.451 Y74.960 E0.03690 ; perimeter
G1 X99.383 Y75.376 E0.08143 ; perimeter
G1 X99.383 Y76.205 E0.03417 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y76.749 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.201 Y76.432 E0.06634 ; perimeter
G1 X97.055 Y76.172 E0.04842 ; perimeter
G1 X97.055 Y74.459 E0.07057 ; perimeter
G1 X98.002 Y74.683 E0.04010 ; perimeter
G1 X99.780 Y75.054 E0.07481 ; perimeter
G1 X99.780 Y76.689 E0.06737 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.414 Y76.586 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.201 Y76.432 E-0.36936 ; wipe and retract
G1 X97.055 Y76.172 E-0.27137 ; wipe and retract
G1 X97.055 Y75.655 E-0.11927 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X89.774 Y76.553 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.15587 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X62.015 Y57.570 E1.06071 ; perimeter
G1 X61.697 Y57.348 E0.01596 ; perimeter
G1 X61.301 Y57.164 E0.01799 ; perimeter
G1 X60.878 Y57.057 E0.01801 ; perimeter
G1 X60.501 Y57.024 E0.01557 ; perimeter
G1 X60.098 Y57.057 E0.01664 ; perimeter
G1 X59.671 Y57.169 E0.01818 ; perimeter
G1 X59.303 Y57.339 E0.01673 ; perimeter
G1 X59.124 Y57.465 E0.00903 ; perimeter
G1 X58.667 Y57.082 E0.02458 ; perimeter
G1 X58.893 Y56.897 E0.01202 ; perimeter
G1 X59.228 Y56.689 E0.01626 ; perimeter
G1 X59.546 Y56.550 E0.01431 ; perimeter
G1 X59.882 Y56.452 E0.01443 ; perimeter
G1 X60.229 Y56.398 E0.01443 ; perimeter
G1 X60.579 Y56.391 E0.01443 ; perimeter
G1 X60.891 Y56.425 E0.01294 ; perimeter
G1 X61.271 Y56.514 E0.01605 ; perimeter
G1 X61.593 Y56.639 E0.01427 ; perimeter
G1 X61.901 Y56.808 E0.01445 ; perimeter
G1 X62.274 Y57.089 E0.01922 ; perimeter
G1 X81.934 Y73.586 E1.05727 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.118 Y76.143 E0.16390 ; perimeter
G1 X89.813 Y76.507 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.823 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.16626 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X61.773 Y57.885 E1.06595 ; perimeter
G1 X61.499 Y57.692 E0.01381 ; perimeter
G1 X61.168 Y57.539 E0.01500 ; perimeter
G1 X60.811 Y57.449 E0.01517 ; perimeter
G1 X60.500 Y57.422 E0.01288 ; perimeter
G1 X60.165 Y57.449 E0.01383 ; perimeter
G1 X59.806 Y57.543 E0.01529 ; perimeter
G1 X59.502 Y57.684 E0.01380 ; perimeter
G1 X59.191 Y57.903 E0.01568 ; perimeter
G1 X59.117 Y57.977 E0.00431 ; perimeter
G1 X58.093 Y57.118 E0.05509 ; perimeter
G1 X58.368 Y56.814 E0.01687 ; perimeter
G1 X58.662 Y56.574 E0.01565 ; perimeter
G1 X59.043 Y56.338 E0.01847 ; perimeter
G1 X59.410 Y56.176 E0.01653 ; perimeter
G1 X59.797 Y56.064 E0.01657 ; perimeter
G1 X60.194 Y56.003 E0.01657 ; perimeter
G1 X60.596 Y55.994 E0.01657 ; perimeter
G1 X60.958 Y56.034 E0.01499 ; perimeter
G1 X61.388 Y56.134 E0.01819 ; perimeter
G1 X61.762 Y56.279 E0.01652 ; perimeter
G1 X62.116 Y56.475 E0.01669 ; perimeter
G1 X62.520 Y56.778 E0.02081 ; perimeter
G1 X82.078 Y73.189 E1.05176 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X90.677 Y76.094 E0.18617 ; perimeter
G1 X89.862 Y77.065 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.543 Y76.826 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.309 Y74.987 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X49.046 Y68.718 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X49.004 Y68.682 E0.00229 ; perimeter
G1 X57.491 Y58.567 E0.54397 ; perimeter
G1 X57.534 Y58.603 E0.00229 ; perimeter
G1 X49.085 Y68.672 E0.54150 ; perimeter
M204 S1000 ; adjust acceleration
G1 X49.095 Y69.276 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.445 Y68.731 E0.03495 ; perimeter
G1 X57.442 Y58.008 E0.57663 ; perimeter
G1 X58.092 Y58.554 E0.03495 ; perimeter
G1 X55.643 Y61.472 E0.15696 ; perimeter
G1 X57.547 Y63.070 E0.10239 ; perimeter
G1 X57.203 Y63.480 E0.02205 ; perimeter
G1 X55.299 Y61.882 E0.10239 ; perimeter
G1 X51.888 Y65.948 E0.21861 ; perimeter
G1 X53.792 Y67.545 E0.10239 ; perimeter
G1 X53.448 Y67.955 E0.02205 ; perimeter
G1 X51.544 Y66.358 E0.10239 ; perimeter
G1 X49.134 Y69.230 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X49.144 Y69.835 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X48.026 Y68.896 E0.06014 ; perimeter
G1 X48.003 Y68.641 E0.01056 ; perimeter
G1 X57.277 Y57.589 E0.59436 ; perimeter
G1 X57.532 Y57.567 E0.01056 ; perimeter
G1 X58.651 Y58.505 E0.06014 ; perimeter
G1 X56.202 Y61.424 E0.15696 ; perimeter
G1 X58.106 Y63.021 E0.10239 ; perimeter
G1 X57.252 Y64.039 E0.05471 ; perimeter
G1 X55.348 Y62.441 E0.10239 ; perimeter
G1 X52.446 Y65.899 E0.18596 ; perimeter
G1 X54.351 Y67.496 E0.10239 ; perimeter
G1 X53.497 Y68.514 E0.05471 ; perimeter
G1 X51.593 Y66.916 E0.10239 ; perimeter
G1 X49.182 Y69.789 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X49.082 Y69.440 F10800.000 ; move inwards before travel
G1 F8640
G1 X48.026 Y68.896 E-0.33736 ; wipe and retract
G1 X48.003 Y68.641 E-0.05917 ; wipe and retract
G1 X49.015 Y67.435 E-0.36347 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X75.945 Y99.101 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.235 Y75.011 E1.54393 ; perimeter
G1 X46.895 Y74.692 E0.01921 ; perimeter
G1 X46.674 Y74.417 E0.01454 ; perimeter
G1 X46.490 Y74.114 E0.01458 ; perimeter
G1 X46.348 Y73.788 E0.01466 ; perimeter
G1 X46.251 Y73.445 E0.01471 ; perimeter
G1 X46.199 Y73.087 E0.01491 ; perimeter
G1 X46.192 Y72.793 E0.01210 ; perimeter
G1 X46.228 Y72.438 E0.01469 ; perimeter
G1 X46.310 Y72.093 E0.01461 ; perimeter
G1 X46.437 Y71.761 E0.01465 ; perimeter
G1 X46.607 Y71.448 E0.01467 ; perimeter
G1 X46.829 Y71.144 E0.01554 ; perimeter
G1 X47.723 Y70.079 E0.05726 ; perimeter
G1 X48.133 Y70.423 E0.02205 ; perimeter
G1 X47.372 Y71.330 E0.04877 ; perimeter
G1 X47.148 Y71.650 E0.01612 ; perimeter
G1 X46.971 Y72.030 E0.01725 ; perimeter
G1 X46.862 Y72.434 E0.01725 ; perimeter
G1 X46.826 Y72.851 E0.01725 ; perimeter
G1 X46.862 Y73.268 E0.01725 ; perimeter
G1 X46.961 Y73.636 E0.01570 ; perimeter
G1 X47.145 Y74.048 E0.01856 ; perimeter
G1 X47.388 Y74.395 E0.01746 ; perimeter
G1 X47.664 Y74.672 E0.01612 ; perimeter
G1 X76.289 Y98.691 E1.53937 ; perimeter
G1 X75.984 Y99.055 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.994 Y99.659 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.972 Y75.307 E1.56070 ; perimeter
G1 X46.604 Y74.962 E0.02080 ; perimeter
G1 X46.348 Y74.645 E0.01679 ; perimeter
G1 X46.138 Y74.297 E0.01676 ; perimeter
G1 X45.974 Y73.922 E0.01684 ; perimeter
G1 X45.862 Y73.528 E0.01689 ; perimeter
G1 X45.803 Y73.119 E0.01699 ; perimeter
G1 X45.796 Y72.778 E0.01409 ; perimeter
G1 X45.836 Y72.373 E0.01677 ; perimeter
G1 X45.930 Y71.976 E0.01678 ; perimeter
G1 X46.076 Y71.595 E0.01682 ; perimeter
G1 X46.271 Y71.235 E0.01685 ; perimeter
G1 X46.517 Y70.899 E0.01718 ; perimeter
G1 X47.674 Y69.520 E0.07413 ; perimeter
G1 X48.691 Y70.374 E0.05471 ; perimeter
G1 X47.687 Y71.571 E0.06438 ; perimeter
G1 X47.492 Y71.849 E0.01398 ; perimeter
G1 X47.344 Y72.166 E0.01439 ; perimeter
G1 X47.254 Y72.503 E0.01439 ; perimeter
G1 X47.224 Y72.851 E0.01439 ; perimeter
G1 X47.254 Y73.199 E0.01439 ; perimeter
G1 X47.336 Y73.503 E0.01298 ; perimeter
G1 X47.491 Y73.852 E0.01570 ; perimeter
G1 X47.692 Y74.139 E0.01447 ; perimeter
G1 X47.932 Y74.379 E0.01398 ; perimeter
G1 X76.848 Y98.642 E1.55498 ; perimeter
G1 X76.033 Y99.613 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.691 Y99.399 F10800.000 ; move inwards before travel
G1 F8640
G1 X73.508 Y97.502 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X151.013 Y75.781 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.013 Y75.698 E0.00344 ; perimeter
G1 X152.153 Y75.460 E0.04796 ; perimeter
G1 X152.153 Y75.539 E0.00325 ; perimeter
G1 X151.072 Y75.770 E0.04552 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.617 Y76.265 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.617 Y75.376 E0.03664 ; perimeter
G1 X152.549 Y74.960 E0.08143 ; perimeter
G1 X152.549 Y75.856 E0.03691 ; perimeter
G1 X150.676 Y76.253 E0.07890 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y76.749 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.220 Y75.054 E0.06984 ; perimeter
G1 X151.998 Y74.683 E0.07482 ; perimeter
G1 X152.945 Y74.459 E0.04010 ; perimeter
G1 X152.945 Y76.172 E0.07058 ; perimeter
G1 X151.799 Y76.432 E0.04842 ; perimeter
G1 X150.279 Y76.737 E0.06387 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.396 Y76.390 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.220 Y75.054 E-0.38898 ; wipe and retract
G1 X151.793 Y74.725 E-0.37102 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X173.259 Y91.956 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X161.506 Y77.950 E0.75325 ; perimeter
G1 X161.549 Y77.914 E0.00229 ; perimeter
G1 X173.299 Y91.917 E0.75307 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X171.176 Y89.402 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X164.047 Y80.274 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X164.980 Y79.491 E0.05021 ; perimeter
G1 X165.324 Y79.901 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.05021 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X172.001 Y87.857 E0.05021 ; perimeter
G1 X172.345 Y88.267 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.05021 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.211 Y92.515 E0.03495 ; perimeter
G1 X160.948 Y77.901 E0.78590 ; perimeter
G1 X161.598 Y77.355 E0.03495 ; perimeter
G1 X164.008 Y80.228 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X164.096 Y79.716 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X165.029 Y78.932 E0.05021 ; perimeter
G1 X165.883 Y79.950 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.05021 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X172.050 Y87.299 E0.05021 ; perimeter
G1 X172.903 Y88.316 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.05021 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.301 Y92.957 E0.06014 ; perimeter
G1 X173.045 Y92.934 E0.01056 ; perimeter
G1 X164.068 Y82.235 E0.57537 ; perimeter
G1 X160.506 Y77.991 E0.22826 ; perimeter
G1 X160.528 Y77.735 E0.01056 ; perimeter
G1 X161.647 Y76.797 E0.06014 ; perimeter
G1 X164.057 Y79.670 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X164.388 Y79.988 F10800.000 ; move inwards before travel
G1 F8640
G1 X165.029 Y78.932 E-0.28176 ; wipe and retract
G1 X165.883 Y79.950 E-0.30664 ; wipe and retract
G1 X165.314 Y80.427 E-0.17160 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y101.107 E0.04011 ; perimeter
G1 X170.060 Y101.107 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.04011 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.747 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.711 E0.06321 ; perimeter
G1 X170.456 Y100.711 E0.21040 ; perimeter
G1 X170.456 Y102.245 E0.06321 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.807 Y102.643 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.583 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y100.314 E0.08630 ; perimeter
G1 X170.853 Y100.314 E0.24306 ; perimeter
G1 X170.853 Y102.409 E0.08630 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.643 Y103.039 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.567 Y102.640 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.953 Y102.409 E-0.21581 ; wipe and retract
G1 X164.953 Y100.314 E-0.48370 ; wipe and retract
G1 X165.215 Y100.314 E-0.06049 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X166.282 Y102.131 ; move to first infill point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.59
G1 X166.061 Y101.910 E0.01631 ; infill
G1 X166.061 Y101.423 E0.02544 ; infill
G1 X166.284 Y101.423 E0.01163 ; infill
G1 X166.792 Y101.931 E0.03747 ; infill
G1 X167.502 Y101.931 E0.03707 ; infill
G1 X166.994 Y101.423 E0.03747 ; infill
G1 X167.704 Y101.423 E0.03707 ; infill
G1 X168.212 Y101.931 E0.03747 ; infill
G1 X168.922 Y101.931 E0.03707 ; infill
G1 X168.415 Y101.423 E0.03747 ; infill
G1 X169.125 Y101.423 E0.03707 ; infill
G1 X169.833 Y102.131 E0.05230 ; infill
G1 F8640
G1 X169.125 Y101.423 E-0.23135 ; wipe and retract
G1 X168.415 Y101.423 E-0.16399 ; wipe and retract
G1 X168.922 Y101.931 E-0.16576 ; wipe and retract
G1 X168.212 Y101.931 E-0.16399 ; wipe and retract
G1 X168.105 Y101.824 E-0.03492 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X174.055 Y99.101 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X173.711 Y98.691 E0.02205 ; perimeter
G1 X202.336 Y74.672 E1.53937 ; perimeter
M73 P89 R14
G1 X202.612 Y74.395 E0.01613 ; perimeter
G1 X202.852 Y74.052 E0.01725 ; perimeter
G1 X203.029 Y73.673 E0.01725 ; perimeter
G1 X203.138 Y73.268 E0.01725 ; perimeter
G1 X203.174 Y72.851 E0.01725 ; perimeter
G1 X203.138 Y72.434 E0.01725 ; perimeter
G1 X203.029 Y72.030 E0.01725 ; perimeter
G1 X202.852 Y71.650 E0.01725 ; perimeter
G1 X202.628 Y71.330 E0.01612 ; perimeter
G1 X201.867 Y70.423 E0.04877 ; perimeter
G1 X202.277 Y70.079 E0.02205 ; perimeter
G1 X203.171 Y71.144 E0.05726 ; perimeter
G1 X203.393 Y71.448 E0.01554 ; perimeter
G1 X203.563 Y71.761 E0.01467 ; perimeter
G1 X203.690 Y72.093 E0.01465 ; perimeter
G1 X203.773 Y72.441 E0.01473 ; perimeter
G1 X203.804 Y72.724 E0.01173 ; perimeter
G1 X203.795 Y73.149 E0.01750 ; perimeter
G1 X203.750 Y73.442 E0.01222 ; perimeter
G1 X203.652 Y73.786 E0.01475 ; perimeter
G1 X203.496 Y74.138 E0.01587 ; perimeter
G1 X203.327 Y74.417 E0.01342 ; perimeter
G1 X203.105 Y74.692 E0.01456 ; perimeter
G1 X202.765 Y75.011 E0.01921 ; perimeter
G1 X174.101 Y99.062 E1.54146 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.006 Y99.659 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X173.152 Y98.642 E0.05471 ; perimeter
G1 X202.068 Y74.379 E1.55498 ; perimeter
G1 X202.308 Y74.139 E0.01398 ; perimeter
G1 X202.508 Y73.853 E0.01439 ; perimeter
G1 X202.656 Y73.537 E0.01439 ; perimeter
G1 X202.746 Y73.199 E0.01439 ; perimeter
G1 X202.776 Y72.851 E0.01439 ; perimeter
G1 X202.746 Y72.503 E0.01439 ; perimeter
G1 X202.656 Y72.166 E0.01439 ; perimeter
G1 X202.508 Y71.849 E0.01439 ; perimeter
G1 X202.313 Y71.571 E0.01398 ; perimeter
G1 X201.309 Y70.374 E0.06438 ; perimeter
G1 X202.326 Y69.520 E0.05471 ; perimeter
G1 X203.483 Y70.899 E0.07413 ; perimeter
G1 X203.729 Y71.235 E0.01718 ; perimeter
G1 X203.924 Y71.595 E0.01685 ; perimeter
G1 X204.070 Y71.976 E0.01682 ; perimeter
G1 X204.164 Y72.374 E0.01682 ; perimeter
G1 X204.200 Y72.706 E0.01379 ; perimeter
G1 X204.191 Y73.183 E0.01964 ; perimeter
G1 X204.138 Y73.527 E0.01433 ; perimeter
G1 X204.026 Y73.921 E0.01691 ; perimeter
G1 X203.848 Y74.322 E0.01806 ; perimeter
G1 X203.652 Y74.645 E0.01555 ; perimeter
G1 X203.396 Y74.962 E0.01680 ; perimeter
G1 X203.028 Y75.307 E0.02080 ; perimeter
G1 X174.052 Y99.621 E1.55823 ; perimeter
M73 Q89 S15
M204 S1000 ; adjust acceleration
G1 X173.936 Y99.265 F10800.000 ; move inwards before travel
G1 F8640
G1 X173.152 Y98.642 E-0.30695 ; wipe and retract
G1 X174.655 Y97.381 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X200.954 Y68.718 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X192.466 Y58.603 E0.54397 ; perimeter
G1 X192.509 Y58.567 E0.00229 ; perimeter
G1 X200.994 Y68.679 E0.54379 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.905 Y69.276 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.456 Y66.358 E0.15696 ; perimeter
G1 X196.552 Y67.955 E0.10239 ; perimeter
G1 X196.208 Y67.545 E0.02205 ; perimeter
G1 X198.112 Y65.948 E0.10239 ; perimeter
G1 X194.701 Y61.882 E0.21861 ; perimeter
G1 X192.797 Y63.480 E0.10239 ; perimeter
G1 X192.453 Y63.070 E0.02205 ; perimeter
G1 X194.357 Y61.472 E0.10239 ; perimeter
G1 X191.908 Y58.554 E0.15696 ; perimeter
G1 X192.558 Y58.008 E0.03495 ; perimeter
G1 X201.555 Y68.731 E0.57663 ; perimeter
G1 X200.951 Y69.238 E0.03247 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.856 Y69.835 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X198.407 Y66.916 E0.15696 ; perimeter
G1 X196.503 Y68.514 E0.10239 ; perimeter
G1 X195.649 Y67.496 E0.05471 ; perimeter
G1 X197.554 Y65.899 E0.10239 ; perimeter
G1 X194.652 Y62.441 E0.18596 ; perimeter
G1 X192.748 Y64.039 E0.10239 ; perimeter
G1 X191.894 Y63.021 E0.05471 ; perimeter
G1 X193.798 Y61.424 E0.10239 ; perimeter
G1 X191.349 Y58.505 E0.15696 ; perimeter
G1 X192.468 Y57.567 E0.06014 ; perimeter
G1 X192.723 Y57.589 E0.01056 ; perimeter
G1 X201.997 Y68.641 E0.59436 ; perimeter
G1 X201.974 Y68.896 E0.01056 ; perimeter
G1 X200.902 Y69.796 E0.05767 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.772 Y69.444 F10800.000 ; move inwards before travel
G1 F8640
G1 X198.747 Y67.308 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X160.226 Y76.553 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.882 Y76.143 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.16390 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X187.726 Y57.089 E1.05727 ; perimeter
G1 X188.099 Y56.808 E0.01922 ; perimeter
G1 X188.407 Y56.639 E0.01445 ; perimeter
G1 X188.733 Y56.512 E0.01441 ; perimeter
G1 X189.069 Y56.430 E0.01426 ; perimeter
G1 X189.467 Y56.392 E0.01647 ; perimeter
G1 X189.771 Y56.398 E0.01255 ; perimeter
G1 X190.118 Y56.452 E0.01443 ; perimeter
G1 X190.454 Y56.550 E0.01443 ; perimeter
G1 X190.775 Y56.691 E0.01446 ; perimeter
G1 X191.059 Y56.862 E0.01366 ; perimeter
G1 X191.333 Y57.082 E0.01447 ; perimeter
G1 X190.876 Y57.465 E0.02457 ; perimeter
G1 X190.697 Y57.339 E0.00903 ; perimeter
G1 X190.329 Y57.169 E0.01673 ; perimeter
G1 X189.902 Y57.057 E0.01818 ; perimeter
G1 X189.499 Y57.024 E0.01664 ; perimeter
G1 X189.122 Y57.057 E0.01557 ; perimeter
G1 X188.699 Y57.164 E0.01801 ; perimeter
G1 X188.303 Y57.348 E0.01799 ; perimeter
G1 X187.985 Y57.570 E0.01596 ; perimeter
G1 X168.261 Y74.121 E1.06071 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X160.272 Y76.514 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.177 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.323 Y76.094 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.18617 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X187.480 Y56.778 E1.05176 ; perimeter
G1 X187.884 Y56.475 E0.02080 ; perimeter
G1 X188.238 Y56.279 E0.01669 ; perimeter
G1 X188.613 Y56.134 E0.01657 ; perimeter
G1 X189.002 Y56.038 E0.01651 ; perimeter
G1 X189.452 Y55.995 E0.01861 ; perimeter
G1 X189.806 Y56.003 E0.01457 ; perimeter
G1 X190.203 Y56.064 E0.01657 ; perimeter
G1 X190.590 Y56.176 E0.01657 ; perimeter
G1 X190.958 Y56.338 E0.01658 ; perimeter
G1 X191.285 Y56.536 E0.01573 ; perimeter
G1 X191.581 Y56.769 E0.01554 ; perimeter
G1 X191.914 Y57.112 E0.01968 ; perimeter
G1 X190.883 Y57.977 E0.05545 ; perimeter
G1 X190.809 Y57.903 E0.00431 ; perimeter
G1 X190.498 Y57.684 E0.01568 ; perimeter
G1 X190.194 Y57.543 E0.01380 ; perimeter
G1 X189.835 Y57.449 E0.01529 ; perimeter
G1 X189.500 Y57.422 E0.01383 ; perimeter
G1 X189.189 Y57.449 E0.01288 ; perimeter
G1 X188.832 Y57.539 E0.01517 ; perimeter
G1 X188.501 Y57.692 E0.01500 ; perimeter
G1 X188.227 Y57.885 E0.01381 ; perimeter
G1 X168.405 Y74.517 E1.06595 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X160.223 Y77.073 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.159 Y76.712 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.323 Y76.094 E-0.30695 ; wipe and retract
G1 X160.826 Y74.833 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y139.253 E0.04011 ; perimeter
G1 X83.970 Y139.253 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.04011 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.968 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.857 E0.06321 ; perimeter
G1 X84.366 Y138.857 E0.21040 ; perimeter
G1 X84.366 Y140.391 E0.06321 ; perimeter
G1 X84.010 Y140.747 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.132 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y138.460 E0.08630 ; perimeter
G1 X84.762 Y138.460 E0.24305 ; perimeter
G1 X84.762 Y140.555 E0.08630 ; perimeter
G1 X84.175 Y141.143 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.802 Y140.960 F10800.000 ; move inwards before travel
G1 X83.743 Y140.278 ; move to first infill point
G1 F7168.6
G1 X83.035 Y139.569 E0.05230 ; infill
G1 X82.324 Y139.569 E0.03707 ; infill
G1 X82.832 Y140.077 E0.03747 ; infill
G1 X82.122 Y140.077 E0.03707 ; infill
G1 X81.614 Y139.569 E0.03747 ; infill
G1 X80.904 Y139.569 E0.03707 ; infill
G1 X81.412 Y140.077 E0.03747 ; infill
G1 X80.701 Y140.077 E0.03707 ; infill
G1 X80.194 Y139.569 E0.03747 ; infill
G1 X79.971 Y139.569 E0.01163 ; infill
G1 X79.971 Y140.057 E0.02544 ; infill
G1 X80.192 Y140.278 E0.01631 ; infill
G1 F8640
G1 X79.971 Y140.057 E-0.07217 ; wipe and retract
G1 X79.971 Y139.569 E-0.11255 ; wipe and retract
G1 X80.194 Y139.569 E-0.05143 ; wipe and retract
G1 X80.701 Y140.077 E-0.16576 ; wipe and retract
G1 X81.412 Y140.077 E-0.16399 ; wipe and retract
G1 X80.904 Y139.569 E-0.16576 ; wipe and retract
G1 X81.027 Y139.569 E-0.02834 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X76.455 Y130.102 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X76.413 Y130.067 E0.00229 ; perimeter
G1 X88.166 Y116.060 E0.75325 ; perimeter
G1 X88.209 Y116.096 E0.00229 ; perimeter
G1 X76.494 Y130.057 E0.75078 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.504 Y130.661 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X75.854 Y130.116 E0.03495 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X77.370 Y126.414 E0.05021 ; perimeter
G1 X77.714 Y126.003 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.05021 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X84.390 Y118.047 E0.05021 ; perimeter
G1 X84.734 Y117.637 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.05021 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.767 Y116.047 E0.03495 ; perimeter
G1 X76.543 Y130.615 E0.78343 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X75.854 Y130.116 E-0.19636 ; wipe and retract
G1 X77.423 Y128.246 E-0.56364 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X75.296 Y130.164 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X76.811 Y126.462 E0.05021 ; perimeter
G1 X77.665 Y125.445 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.05021 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X83.832 Y118.096 E0.05021 ; perimeter
G1 X84.686 Y117.078 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.05021 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.186 Y115.881 E0.06014 ; perimeter
G1 X89.209 Y116.137 E0.01056 ; perimeter
G1 X76.670 Y131.080 E0.80363 ; perimeter
G1 X76.414 Y131.103 E0.01056 ; perimeter
G1 X75.342 Y130.203 E0.05767 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.667 Y130.014 F10800.000 ; move inwards before travel
G1 F8640
G1 X77.418 Y127.649 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X98.702 Y113.928 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.562 Y113.685 E0.04800 ; perimeter
G1 X97.562 Y113.606 E0.00325 ; perimeter
G1 X98.702 Y113.844 E0.04796 ; perimeter
G1 X98.702 Y113.868 E0.00097 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.098 Y114.411 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.166 Y114.002 E0.08137 ; perimeter
G1 X97.166 Y113.106 E0.03690 ; perimeter
G1 X99.098 Y113.522 E0.08143 ; perimeter
G1 X99.098 Y114.351 E0.03417 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y114.895 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.916 Y114.578 E0.06634 ; perimeter
G1 X96.769 Y114.318 E0.04842 ; perimeter
G1 X96.769 Y112.605 E0.07057 ; perimeter
G1 X97.717 Y112.829 E0.04010 ; perimeter
G1 X99.494 Y113.200 E0.07481 ; perimeter
G1 X99.494 Y114.835 E0.06737 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.129 Y114.732 F10800.000 ; move inwards before travel
G1 F8640
G1 X97.916 Y114.578 E-0.36936 ; wipe and retract
G1 X96.769 Y114.318 E-0.27137 ; wipe and retract
G1 X96.769 Y113.802 E-0.11927 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X89.489 Y114.699 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.15587 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X61.729 Y95.716 E1.06071 ; perimeter
G1 X61.412 Y95.494 E0.01596 ; perimeter
G1 X61.016 Y95.310 E0.01799 ; perimeter
G1 X60.592 Y95.203 E0.01801 ; perimeter
G1 X60.216 Y95.170 E0.01557 ; perimeter
G1 X59.813 Y95.203 E0.01664 ; perimeter
G1 X59.386 Y95.315 E0.01818 ; perimeter
G1 X59.018 Y95.485 E0.01673 ; perimeter
G1 X58.839 Y95.612 E0.00903 ; perimeter
G1 X58.381 Y95.228 E0.02458 ; perimeter
G1 X58.607 Y95.043 E0.01202 ; perimeter
G1 X58.943 Y94.836 E0.01626 ; perimeter
G1 X59.261 Y94.696 E0.01431 ; perimeter
G1 X59.597 Y94.598 E0.01443 ; perimeter
G1 X59.943 Y94.545 E0.01443 ; perimeter
G1 X60.294 Y94.537 E0.01443 ; perimeter
G1 X60.606 Y94.571 E0.01294 ; perimeter
G1 X60.985 Y94.660 E0.01605 ; perimeter
G1 X61.308 Y94.785 E0.01427 ; perimeter
G1 X61.616 Y94.955 E0.01445 ; perimeter
G1 X61.988 Y95.235 E0.01922 ; perimeter
G1 X81.649 Y111.732 E1.05727 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X89.833 Y114.289 E0.16390 ; perimeter
G1 X89.528 Y114.653 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.538 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.16626 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X61.488 Y96.031 E1.06595 ; perimeter
G1 X61.213 Y95.838 E0.01381 ; perimeter
G1 X60.883 Y95.685 E0.01500 ; perimeter
G1 X60.526 Y95.595 E0.01517 ; perimeter
G1 X60.215 Y95.568 E0.01288 ; perimeter
G1 X59.880 Y95.595 E0.01383 ; perimeter
G1 X59.521 Y95.689 E0.01529 ; perimeter
G1 X59.217 Y95.830 E0.01380 ; perimeter
G1 X58.905 Y96.049 E0.01568 ; perimeter
G1 X58.832 Y96.123 E0.00431 ; perimeter
G1 X57.807 Y95.264 E0.05509 ; perimeter
G1 X58.082 Y94.960 E0.01687 ; perimeter
G1 X58.377 Y94.720 E0.01565 ; perimeter
G1 X58.758 Y94.484 E0.01847 ; perimeter
G1 X59.125 Y94.322 E0.01653 ; perimeter
G1 X59.511 Y94.210 E0.01657 ; perimeter
G1 X59.909 Y94.149 E0.01657 ; perimeter
G1 X60.311 Y94.140 E0.01657 ; perimeter
G1 X60.673 Y94.180 E0.01499 ; perimeter
G1 X61.103 Y94.280 E0.01819 ; perimeter
G1 X61.477 Y94.425 E0.01652 ; perimeter
G1 X61.831 Y94.621 E0.01669 ; perimeter
G1 X62.235 Y94.924 E0.02081 ; perimeter
G1 X81.793 Y111.335 E1.05176 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X90.392 Y114.240 E0.18617 ; perimeter
G1 X89.577 Y115.212 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.257 Y114.972 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.024 Y113.134 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X48.761 Y106.864 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.718 Y106.828 E0.00229 ; perimeter
G1 X57.206 Y96.713 E0.54397 ; perimeter
G1 X57.249 Y96.749 E0.00229 ; perimeter
G1 X48.800 Y106.818 E0.54150 ; perimeter
M204 S1000 ; adjust acceleration
G1 X48.810 Y107.422 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.160 Y106.877 E0.03495 ; perimeter
G1 X57.157 Y96.155 E0.57663 ; perimeter
G1 X57.807 Y96.700 E0.03495 ; perimeter
G1 X55.358 Y99.619 E0.15696 ; perimeter
G1 X57.262 Y101.216 E0.10239 ; perimeter
G1 X56.918 Y101.626 E0.02205 ; perimeter
G1 X55.014 Y100.029 E0.10239 ; perimeter
G1 X51.603 Y104.094 E0.21861 ; perimeter
G1 X53.507 Y105.691 E0.10239 ; perimeter
G1 X53.163 Y106.102 E0.02205 ; perimeter
G1 X51.259 Y104.504 E0.10239 ; perimeter
G1 X48.848 Y107.377 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X48.859 Y107.981 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X47.740 Y107.043 E0.06014 ; perimeter
G1 X47.718 Y106.787 E0.01056 ; perimeter
G1 X56.992 Y95.735 E0.59436 ; perimeter
G1 X57.247 Y95.713 E0.01056 ; perimeter
G1 X58.365 Y96.651 E0.06014 ; perimeter
G1 X55.916 Y99.570 E0.15696 ; perimeter
G1 X57.821 Y101.167 E0.10239 ; perimeter
G1 X56.967 Y102.185 E0.05471 ; perimeter
G1 X55.063 Y100.587 E0.10239 ; perimeter
G1 X52.161 Y104.045 E0.18596 ; perimeter
G1 X54.065 Y105.643 E0.10239 ; perimeter
G1 X53.212 Y106.660 E0.05471 ; perimeter
G1 X51.308 Y105.062 E0.10239 ; perimeter
G1 X48.897 Y107.935 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X48.796 Y107.586 F10800.000 ; move inwards before travel
G1 F8640
G1 X47.740 Y107.043 E-0.33736 ; wipe and retract
G1 X47.718 Y106.787 E-0.05917 ; wipe and retract
G1 X48.730 Y105.581 E-0.36347 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X75.660 Y137.247 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X46.950 Y113.157 E1.54393 ; perimeter
G1 X46.610 Y112.838 E0.01921 ; perimeter
G1 X46.388 Y112.563 E0.01454 ; perimeter
G1 X46.205 Y112.261 E0.01458 ; perimeter
G1 X46.063 Y111.934 E0.01466 ; perimeter
G1 X45.965 Y111.591 E0.01471 ; perimeter
G1 X45.914 Y111.233 E0.01491 ; perimeter
G1 X45.907 Y110.939 E0.01210 ; perimeter
G1 X45.943 Y110.584 E0.01469 ; perimeter
G1 X46.024 Y110.239 E0.01461 ; perimeter
G1 X46.151 Y109.907 E0.01465 ; perimeter
G1 X46.322 Y109.594 E0.01467 ; perimeter
G1 X46.544 Y109.290 E0.01554 ; perimeter
G1 X47.438 Y108.225 E0.05726 ; perimeter
G1 X47.848 Y108.569 E0.02205 ; perimeter
G1 X47.087 Y109.476 E0.04877 ; perimeter
G1 X46.862 Y109.796 E0.01612 ; perimeter
G1 X46.685 Y110.176 E0.01725 ; perimeter
G1 X46.577 Y110.580 E0.01725 ; perimeter
G1 X46.541 Y110.997 E0.01725 ; perimeter
G1 X46.577 Y111.414 E0.01725 ; perimeter
G1 X46.676 Y111.783 E0.01570 ; perimeter
G1 X46.859 Y112.194 E0.01856 ; perimeter
G1 X47.102 Y112.541 E0.01746 ; perimeter
G1 X47.379 Y112.818 E0.01612 ; perimeter
G1 X76.004 Y136.837 E1.53937 ; perimeter
G1 X75.699 Y137.201 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.709 Y137.805 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.687 Y113.453 E1.56070 ; perimeter
G1 X46.318 Y113.109 E0.02080 ; perimeter
G1 X46.063 Y112.791 E0.01679 ; perimeter
G1 X45.852 Y112.443 E0.01676 ; perimeter
G1 X45.689 Y112.068 E0.01684 ; perimeter
G1 X45.577 Y111.674 E0.01689 ; perimeter
G1 X45.518 Y111.266 E0.01699 ; perimeter
G1 X45.510 Y110.924 E0.01409 ; perimeter
G1 X45.551 Y110.519 E0.01677 ; perimeter
G1 X45.645 Y110.122 E0.01678 ; perimeter
G1 X45.791 Y109.741 E0.01682 ; perimeter
G1 X45.986 Y109.382 E0.01685 ; perimeter
G1 X46.232 Y109.045 E0.01718 ; perimeter
G1 X47.389 Y107.667 E0.07413 ; perimeter
G1 X48.406 Y108.520 E0.05471 ; perimeter
G1 X47.402 Y109.717 E0.06438 ; perimeter
G1 X47.207 Y109.995 E0.01398 ; perimeter
G1 X47.059 Y110.312 E0.01439 ; perimeter
G1 X46.969 Y110.649 E0.01439 ; perimeter
G1 X46.938 Y110.997 E0.01439 ; perimeter
G1 X46.969 Y111.345 E0.01439 ; perimeter
G1 X47.050 Y111.650 E0.01298 ; perimeter
G1 X47.206 Y111.998 E0.01570 ; perimeter
G1 X47.407 Y112.285 E0.01447 ; perimeter
G1 X47.647 Y112.525 E0.01398 ; perimeter
G1 X76.562 Y136.788 E1.55498 ; perimeter
G1 X75.747 Y137.760 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.405 Y137.545 F10800.000 ; move inwards before travel
G1 F8640
G1 X73.223 Y135.648 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X150.728 Y113.928 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.728 Y113.844 E0.00344 ; perimeter
G1 X151.868 Y113.606 E0.04796 ; perimeter
G1 X151.868 Y113.685 E0.00325 ; perimeter
G1 X150.787 Y113.916 E0.04552 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.332 Y114.411 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.332 Y113.522 E0.03664 ; perimeter
G1 X152.264 Y113.106 E0.08143 ; perimeter
G1 X152.264 Y114.002 E0.03691 ; perimeter
G1 X150.390 Y114.400 E0.07890 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y114.895 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.935 Y113.200 E0.06984 ; perimeter
G1 X151.713 Y112.829 E0.07482 ; perimeter
G1 X152.660 Y112.605 E0.04010 ; perimeter
G1 X152.660 Y114.318 E0.07058 ; perimeter
G1 X151.514 Y114.578 E0.04842 ; perimeter
G1 X149.994 Y114.883 E0.06387 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.111 Y114.536 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.935 Y113.200 E-0.38898 ; wipe and retract
G1 X151.508 Y112.871 E-0.37102 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X172.974 Y130.102 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X161.221 Y116.096 E0.75325 ; perimeter
G1 X161.264 Y116.060 E0.00229 ; perimeter
G1 X173.014 Y130.063 E0.75307 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X170.891 Y127.548 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X163.762 Y118.420 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X164.695 Y117.637 E0.05021 ; perimeter
G1 X165.039 Y118.047 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.05021 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X171.716 Y126.003 E0.05021 ; perimeter
G1 X172.060 Y126.414 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.05021 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X172.925 Y130.661 E0.03495 ; perimeter
G1 X160.663 Y116.047 E0.78590 ; perimeter
G1 X161.313 Y115.502 E0.03495 ; perimeter
G1 X163.723 Y118.374 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X163.810 Y117.862 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X164.744 Y117.078 E0.05021 ; perimeter
G1 X165.598 Y118.096 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.05021 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X171.765 Y125.445 E0.05021 ; perimeter
G1 X172.618 Y126.462 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.05021 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.015 Y131.103 E0.06014 ; perimeter
G1 X172.760 Y131.080 E0.01056 ; perimeter
G1 X163.782 Y120.381 E0.57537 ; perimeter
G1 X160.221 Y116.137 E0.22826 ; perimeter
G1 X160.243 Y115.881 E0.01056 ; perimeter
G1 X161.361 Y114.943 E0.06014 ; perimeter
G1 X163.772 Y117.816 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X164.103 Y118.135 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.744 Y117.078 E-0.28176 ; wipe and retract
G1 X165.598 Y118.096 E-0.30664 ; wipe and retract
G1 X165.028 Y118.573 E-0.17160 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y139.253 E0.04011 ; perimeter
G1 X169.775 Y139.253 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.04011 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.462 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.857 E0.06321 ; perimeter
G1 X170.171 Y138.857 E0.21040 ; perimeter
G1 X170.171 Y140.391 E0.06321 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.522 Y140.789 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.298 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y138.460 E0.08630 ; perimeter
G1 X170.567 Y138.460 E0.24306 ; perimeter
G1 X170.567 Y140.555 E0.08630 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.358 Y141.185 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.282 Y140.786 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.667 Y140.555 E-0.21581 ; wipe and retract
G1 X164.667 Y138.460 E-0.48370 ; wipe and retract
G1 X164.929 Y138.460 E-0.06049 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X165.997 Y140.278 ; move to first infill point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.59
G1 X165.776 Y140.057 E0.01631 ; infill
G1 X165.776 Y139.569 E0.02544 ; infill
G1 X165.999 Y139.569 E0.01163 ; infill
G1 X166.506 Y140.077 E0.03747 ; infill
G1 X167.217 Y140.077 E0.03707 ; infill
G1 X166.709 Y139.569 E0.03747 ; infill
G1 X167.419 Y139.569 E0.03707 ; infill
G1 X167.927 Y140.077 E0.03747 ; infill
G1 X168.637 Y140.077 E0.03707 ; infill
G1 X168.129 Y139.569 E0.03747 ; infill
G1 X168.840 Y139.569 E0.03707 ; infill
G1 X169.548 Y140.278 E0.05230 ; infill
G1 F8640
G1 X168.840 Y139.569 E-0.23135 ; wipe and retract
G1 X168.129 Y139.569 E-0.16399 ; wipe and retract
G1 X168.637 Y140.077 E-0.16576 ; wipe and retract
G1 X167.927 Y140.077 E-0.16399 ; wipe and retract
G1 X167.820 Y139.970 E-0.03492 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X173.770 Y137.247 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X173.426 Y136.837 E0.02205 ; perimeter
G1 X202.050 Y112.818 E1.53937 ; perimeter
G1 X202.327 Y112.541 E0.01613 ; perimeter
G1 X202.567 Y112.198 E0.01725 ; perimeter
G1 X202.744 Y111.819 E0.01725 ; perimeter
G1 X202.853 Y111.414 E0.01725 ; perimeter
G1 X202.889 Y110.997 E0.01725 ; perimeter
G1 X202.853 Y110.580 E0.01725 ; perimeter
G1 X202.744 Y110.176 E0.01725 ; perimeter
G1 X202.567 Y109.796 E0.01725 ; perimeter
G1 X202.343 Y109.476 E0.01612 ; perimeter
G1 X201.582 Y108.569 E0.04877 ; perimeter
G1 X201.992 Y108.225 E0.02205 ; perimeter
G1 X202.885 Y109.290 E0.05726 ; perimeter
G1 X203.108 Y109.594 E0.01554 ; perimeter
G1 X203.278 Y109.907 E0.01467 ; perimeter
G1 X203.405 Y110.239 E0.01465 ; perimeter
G1 X203.488 Y110.587 E0.01473 ; perimeter
G1 X203.518 Y110.870 E0.01173 ; perimeter
G1 X203.510 Y111.295 E0.01750 ; perimeter
G1 X203.465 Y111.588 E0.01222 ; perimeter
G1 X203.367 Y111.932 E0.01475 ; perimeter
G1 X203.211 Y112.284 E0.01587 ; perimeter
G1 X203.042 Y112.563 E0.01342 ; perimeter
G1 X202.820 Y112.838 E0.01456 ; perimeter
G1 X202.479 Y113.157 E0.01921 ; perimeter
G1 X173.816 Y137.209 E1.54146 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.721 Y137.805 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X172.867 Y136.788 E0.05471 ; perimeter
G1 X201.782 Y112.525 E1.55498 ; perimeter
G1 X202.022 Y112.285 E0.01398 ; perimeter
G1 X202.223 Y111.999 E0.01439 ; perimeter
G1 X202.370 Y111.683 E0.01439 ; perimeter
G1 X202.461 Y111.345 E0.01439 ; perimeter
G1 X202.491 Y110.997 E0.01439 ; perimeter
G1 X202.461 Y110.649 E0.01439 ; perimeter
G1 X202.370 Y110.312 E0.01439 ; perimeter
G1 X202.223 Y109.995 E0.01439 ; perimeter
G1 X202.028 Y109.717 E0.01398 ; perimeter
G1 X201.024 Y108.520 E0.06438 ; perimeter
G1 X202.041 Y107.667 E0.05471 ; perimeter
G1 X203.197 Y109.045 E0.07413 ; perimeter
G1 X203.444 Y109.382 E0.01718 ; perimeter
G1 X203.639 Y109.741 E0.01685 ; perimeter
G1 X203.785 Y110.122 E0.01682 ; perimeter
G1 X203.879 Y110.520 E0.01682 ; perimeter
G1 X203.915 Y110.852 E0.01379 ; perimeter
G1 X203.906 Y111.329 E0.01964 ; perimeter
G1 X203.853 Y111.673 E0.01433 ; perimeter
G1 X203.741 Y112.068 E0.01691 ; perimeter
G1 X203.563 Y112.468 E0.01806 ; perimeter
G1 X203.367 Y112.791 E0.01555 ; perimeter
G1 X203.111 Y113.109 E0.01680 ; perimeter
G1 X202.742 Y113.453 E0.02080 ; perimeter
G1 X173.767 Y137.767 E1.55823 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.651 Y137.412 F10800.000 ; move inwards before travel
G1 F8640
G1 X172.867 Y136.788 E-0.30695 ; wipe and retract
G1 X174.370 Y135.527 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X200.669 Y106.864 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X192.181 Y96.749 E0.54397 ; perimeter
G1 X192.224 Y96.713 E0.00229 ; perimeter
G1 X200.708 Y106.825 E0.54379 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.620 Y107.422 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.171 Y104.504 E0.15696 ; perimeter
G1 X196.267 Y106.102 E0.10239 ; perimeter
G1 X195.923 Y105.691 E0.02205 ; perimeter
G1 X197.827 Y104.094 E0.10239 ; perimeter
G1 X194.416 Y100.029 E0.21861 ; perimeter
G1 X192.512 Y101.626 E0.10239 ; perimeter
G1 X192.168 Y101.216 E0.02205 ; perimeter
G1 X194.072 Y99.619 E0.10239 ; perimeter
G1 X191.623 Y96.700 E0.15696 ; perimeter
G1 X192.272 Y96.155 E0.03495 ; perimeter
G1 X201.270 Y106.877 E0.57663 ; perimeter
G1 X200.666 Y107.384 E0.03247 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.571 Y107.981 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X198.122 Y105.062 E0.15696 ; perimeter
G1 X196.218 Y106.660 E0.10239 ; perimeter
G1 X195.364 Y105.643 E0.05471 ; perimeter
G1 X197.268 Y104.045 E0.10239 ; perimeter
G1 X194.367 Y100.587 E0.18596 ; perimeter
G1 X192.463 Y102.185 E0.10239 ; perimeter
G1 X191.609 Y101.167 E0.05471 ; perimeter
G1 X193.513 Y99.570 E0.10239 ; perimeter
G1 X191.064 Y96.651 E0.15696 ; perimeter
G1 X192.182 Y95.713 E0.06014 ; perimeter
G1 X192.438 Y95.735 E0.01056 ; perimeter
G1 X201.712 Y106.787 E0.59436 ; perimeter
G1 X201.689 Y107.043 E0.01056 ; perimeter
G1 X200.617 Y107.942 E0.05767 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.487 Y107.590 F10800.000 ; move inwards before travel
G1 F8640
G1 X198.462 Y105.455 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
G1 X159.940 Y114.699 ; move to first perimeter point
G1 Z20.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.596 Y114.289 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.16390 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X187.441 Y95.235 E1.05727 ; perimeter
G1 X187.814 Y94.955 E0.01922 ; perimeter
G1 X188.121 Y94.785 E0.01445 ; perimeter
G1 X188.447 Y94.659 E0.01441 ; perimeter
G1 X188.784 Y94.576 E0.01426 ; perimeter
G1 X189.182 Y94.538 E0.01647 ; perimeter
G1 X189.486 Y94.545 E0.01255 ; perimeter
G1 X189.832 Y94.598 E0.01443 ; perimeter
G1 X190.169 Y94.696 E0.01443 ; perimeter
G1 X190.490 Y94.837 E0.01446 ; perimeter
G1 X190.774 Y95.008 E0.01366 ; perimeter
G1 X191.048 Y95.228 E0.01447 ; perimeter
G1 X190.591 Y95.612 E0.02457 ; perimeter
G1 X190.412 Y95.485 E0.00903 ; perimeter
G1 X190.043 Y95.315 E0.01673 ; perimeter
G1 X189.616 Y95.203 E0.01818 ; perimeter
G1 X189.214 Y95.170 E0.01664 ; perimeter
G1 X188.837 Y95.203 E0.01557 ; perimeter
G1 X188.413 Y95.310 E0.01801 ; perimeter
G1 X188.017 Y95.494 E0.01799 ; perimeter
G1 X187.700 Y95.716 E0.01596 ; perimeter
G1 X167.976 Y112.267 E1.06071 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.986 Y114.661 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.892 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.038 Y114.240 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.18617 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X187.195 Y94.924 E1.05176 ; perimeter
G1 X187.598 Y94.621 E0.02080 ; perimeter
G1 X187.953 Y94.425 E0.01669 ; perimeter
G1 X188.328 Y94.280 E0.01657 ; perimeter
G1 X188.717 Y94.184 E0.01651 ; perimeter
G1 X189.167 Y94.141 E0.01861 ; perimeter
G1 X189.521 Y94.149 E0.01457 ; perimeter
G1 X189.918 Y94.210 E0.01657 ; perimeter
G1 X190.304 Y94.322 E0.01657 ; perimeter
G1 X190.673 Y94.484 E0.01658 ; perimeter
G1 X191.000 Y94.682 E0.01573 ; perimeter
G1 X191.296 Y94.915 E0.01554 ; perimeter
G1 X191.629 Y95.258 E0.01968 ; perimeter
G1 X190.598 Y96.123 E0.05545 ; perimeter
G1 X190.524 Y96.049 E0.00431 ; perimeter
G1 X190.213 Y95.830 E0.01568 ; perimeter
G1 X189.909 Y95.689 E0.01380 ; perimeter
G1 X189.550 Y95.595 E0.01529 ; perimeter
G1 X189.215 Y95.568 E0.01383 ; perimeter
G1 X188.903 Y95.595 E0.01288 ; perimeter
G1 X188.546 Y95.685 E0.01517 ; perimeter
G1 X188.216 Y95.838 E0.01500 ; perimeter
G1 X187.942 Y96.031 E0.01381 ; perimeter
G1 X168.120 Y112.663 E1.06595 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X159.938 Y115.219 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.874 Y114.858 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;20.5


G1 F8640
G1 X159.038 Y114.240 E-0.30695 ; wipe and retract
G1 X160.541 Y112.979 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z20.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;20.5
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y101.107 E0.04011 ; perimeter
G1 X84.255 Y101.107 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.04011 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.253 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.711 E0.06321 ; perimeter
G1 X84.651 Y100.711 E0.21040 ; perimeter
G1 X84.651 Y102.245 E0.06321 ; perimeter
G1 X84.296 Y102.600 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.417 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y100.314 E0.08630 ; perimeter
G1 X85.047 Y100.314 E0.24305 ; perimeter
G1 X85.047 Y102.409 E0.08630 ; perimeter
G1 X84.460 Y102.997 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.087 Y102.814 F10800.000 ; move inwards before travel
G1 F8640
G1 X81.168 Y103.027 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X83.718 Y102.131 ; move to first infill point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.6
G1 X83.939 Y101.910 E0.01632 ; infill
G1 X83.939 Y101.423 E0.02544 ; infill
G1 X83.716 Y101.423 E0.01163 ; infill
G1 X83.208 Y101.931 E0.03747 ; infill
G1 X82.498 Y101.931 E0.03707 ; infill
G1 X83.006 Y101.423 E0.03747 ; infill
G1 X82.295 Y101.423 E0.03707 ; infill
G1 X81.788 Y101.931 E0.03747 ; infill
G1 X81.078 Y101.931 E0.03707 ; infill
G1 X81.585 Y101.423 E0.03747 ; infill
G1 X80.875 Y101.423 E0.03707 ; infill
G1 X80.167 Y102.131 E0.05230 ; infill
G1 F8640
G1 X80.875 Y101.423 E-0.23135 ; wipe and retract
G1 X81.585 Y101.423 E-0.16399 ; wipe and retract
G1 X81.078 Y101.931 E-0.16576 ; wipe and retract
G1 X81.788 Y101.931 E-0.16399 ; wipe and retract
G1 X81.895 Y101.824 E-0.03492 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X76.932 Y92.117 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X76.698 Y91.921 E0.01259 ; perimeter
G1 X88.451 Y77.914 E0.75325 ; perimeter
G1 X88.685 Y78.110 E0.01259 ; perimeter
G1 X76.971 Y92.071 E0.75078 ; perimeter
M204 S1000 ; adjust acceleration
G1 X77.109 Y92.523 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.828 Y92.547 E0.01159 ; perimeter
G1 X76.140 Y91.969 E0.03705 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X77.717 Y88.320 E0.04686 ; perimeter
G1 X78.061 Y87.910 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.04686 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X84.738 Y79.953 E0.04686 ; perimeter
G1 X85.082 Y79.543 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.04686 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X89.091 Y77.933 E0.03705 ; perimeter
G1 X89.116 Y78.214 E0.01159 ; perimeter
G1 X77.147 Y92.477 E0.76703 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.699 Y92.957 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.06014 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X77.159 Y88.368 E0.04686 ; perimeter
G1 X78.012 Y87.351 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.04686 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X84.179 Y80.002 E0.04686 ; perimeter
G1 X85.033 Y78.984 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.04686 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.472 Y77.735 E0.06014 ; perimeter
G1 X89.525 Y78.343 E0.02512 ; perimeter
G1 X77.307 Y92.903 E0.78303 ; perimeter
G1 X76.759 Y92.951 E0.02265 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.565 Y92.580 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.34701 ; wipe and retract
G1 X76.731 Y90.648 E-0.41299 ; wipe and retract
M73 P90 R13
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X99.383 Y76.119 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.451 Y75.707 E0.08139 ; perimeter
G1 X97.451 Y74.960 E0.03077 ; perimeter
G1 X99.383 Y75.376 E0.08142 ; perimeter
G1 X99.383 Y76.059 E0.02813 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y76.602 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.292 Y76.304 E0.06249 ; perimeter
G1 X97.055 Y76.024 E0.05229 ; perimeter
G1 X97.055 Y74.459 E0.06445 ; perimeter
G1 X97.975 Y74.677 E0.03895 ; perimeter
G1 X99.780 Y75.054 E0.07596 ; perimeter
G1 X99.780 Y76.542 E0.06133 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.412 Y76.445 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.292 Y76.304 E-0.34777 ; wipe and retract
G1 X97.055 Y76.024 E-0.29306 ; wipe and retract
G1 X97.055 Y75.507 E-0.11916 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X89.774 Y76.553 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q90 S14
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.15587 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X62.015 Y57.570 E1.06070 ; perimeter
G1 X61.701 Y57.350 E0.01579 ; perimeter
G1 X61.293 Y57.161 E0.01854 ; perimeter
G1 X60.859 Y57.055 E0.01840 ; perimeter
G1 X60.505 Y57.024 E0.01465 ; perimeter
G1 X60.108 Y57.056 E0.01640 ; perimeter
G1 X59.671 Y57.168 E0.01857 ; perimeter
G1 X59.307 Y57.337 E0.01654 ; perimeter
G1 X59.124 Y57.466 E0.00922 ; perimeter
G1 X58.667 Y57.082 E0.02460 ; perimeter
G1 X58.883 Y56.904 E0.01154 ; perimeter
G1 X59.229 Y56.689 E0.01678 ; perimeter
G1 X59.546 Y56.550 E0.01427 ; perimeter
G1 X59.883 Y56.452 E0.01443 ; perimeter
G1 X60.229 Y56.398 E0.01443 ; perimeter
G1 X60.579 Y56.391 E0.01443 ; perimeter
G1 X60.867 Y56.422 E0.01195 ; perimeter
G1 X61.273 Y56.514 E0.01711 ; perimeter
G1 X61.594 Y56.639 E0.01421 ; perimeter
G1 X61.901 Y56.808 E0.01443 ; perimeter
G1 X62.200 Y57.027 E0.01528 ; perimeter
G1 X81.934 Y73.586 E1.06121 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.118 Y76.143 E0.16390 ; perimeter
G1 X89.813 Y76.507 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.823 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.16626 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X61.773 Y57.885 E1.06595 ; perimeter
G1 X61.502 Y57.695 E0.01363 ; perimeter
G1 X61.162 Y57.537 E0.01547 ; perimeter
G1 X60.795 Y57.447 E0.01556 ; perimeter
G1 X60.503 Y57.422 E0.01205 ; perimeter
G1 X60.174 Y57.448 E0.01361 ; perimeter
G1 X59.805 Y57.543 E0.01568 ; perimeter
G1 X59.506 Y57.682 E0.01358 ; perimeter
G1 X59.186 Y57.907 E0.01614 ; perimeter
G1 X59.117 Y57.977 E0.00404 ; perimeter
G1 X58.092 Y57.118 E0.05508 ; perimeter
G1 X58.363 Y56.819 E0.01659 ; perimeter
G1 X58.652 Y56.582 E0.01541 ; perimeter
G1 X59.044 Y56.337 E0.01902 ; perimeter
G1 X59.411 Y56.176 E0.01651 ; perimeter
G1 X59.797 Y56.064 E0.01657 ; perimeter
G1 X60.194 Y56.003 E0.01657 ; perimeter
G1 X60.596 Y55.994 E0.01657 ; perimeter
G1 X60.933 Y56.031 E0.01395 ; perimeter
G1 X61.389 Y56.134 E0.01926 ; perimeter
G1 X61.762 Y56.279 E0.01649 ; perimeter
G1 X62.115 Y56.473 E0.01657 ; perimeter
G1 X62.445 Y56.715 E0.01688 ; perimeter
G1 X82.078 Y73.189 E1.05580 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X90.677 Y76.094 E0.18617 ; perimeter
G1 X89.862 Y77.065 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.543 Y76.826 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.309 Y74.987 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X49.046 Y68.718 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.812 Y68.522 E0.01259 ; perimeter
G1 X57.300 Y58.406 E0.54397 ; perimeter
G1 X57.534 Y58.603 E0.01259 ; perimeter
G1 X49.085 Y68.672 E0.54150 ; perimeter
M204 S1000 ; adjust acceleration
G1 X49.095 Y69.276 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.406 Y68.698 E0.03705 ; perimeter
G1 X48.382 Y68.418 E0.01159 ; perimeter
G1 X57.123 Y58.000 E0.56023 ; perimeter
G1 X57.403 Y57.976 E0.01159 ; perimeter
G1 X58.092 Y58.554 E0.03705 ; perimeter
G1 X55.643 Y61.472 E0.15696 ; perimeter
G1 X57.271 Y62.839 E0.08756 ; perimeter
G1 X56.927 Y63.249 E0.02205 ; perimeter
G1 X55.299 Y61.882 E0.08756 ; perimeter
G1 X51.888 Y65.948 E0.21861 ; perimeter
G1 X53.516 Y67.314 E0.08756 ; perimeter
G1 X53.172 Y67.724 E0.02205 ; perimeter
G1 X51.544 Y66.358 E0.08756 ; perimeter
G1 X49.134 Y69.230 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X49.144 Y69.835 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X48.026 Y68.896 E0.06014 ; perimeter
G1 X47.972 Y68.289 E0.02512 ; perimeter
G1 X56.925 Y57.620 E0.57376 ; perimeter
G1 X57.532 Y57.567 E0.02512 ; perimeter
G1 X58.651 Y58.505 E0.06014 ; perimeter
G1 X56.202 Y61.424 E0.15696 ; perimeter
G1 X57.830 Y62.790 E0.08756 ; perimeter
G1 X56.976 Y63.807 E0.05471 ; perimeter
G1 X55.348 Y62.441 E0.08756 ; perimeter
G1 X52.446 Y65.899 E0.18596 ; perimeter
G1 X54.075 Y67.265 E0.08756 ; perimeter
G1 X53.221 Y68.282 E0.05471 ; perimeter
G1 X51.593 Y66.916 E0.08756 ; perimeter
G1 X49.182 Y69.789 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X49.072 Y69.441 F10800.000 ; move inwards before travel
G1 F8640
G1 X48.026 Y68.896 E-0.33736 ; wipe and retract
G1 X47.972 Y68.289 E-0.14081 ; wipe and retract
G1 X48.757 Y67.354 E-0.28184 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X75.754 Y98.940 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.162 Y74.949 E1.53757 ; perimeter
G1 X46.893 Y74.691 E0.01536 ; perimeter
G1 X46.672 Y74.414 E0.01460 ; perimeter
G1 X46.488 Y74.109 E0.01467 ; perimeter
G1 X46.346 Y73.781 E0.01473 ; perimeter
G1 X46.248 Y73.432 E0.01495 ; perimeter
G1 X46.205 Y73.157 E0.01144 ; perimeter
G1 X46.193 Y72.799 E0.01477 ; perimeter
G1 X46.227 Y72.445 E0.01464 ; perimeter
G1 X46.308 Y72.098 E0.01469 ; perimeter
G1 X46.435 Y71.764 E0.01472 ; perimeter
G1 X46.606 Y71.449 E0.01474 ; perimeter
G1 X46.830 Y71.143 E0.01562 ; perimeter
G1 X47.723 Y70.079 E0.05725 ; perimeter
G1 X48.133 Y70.423 E0.02205 ; perimeter
G1 X47.372 Y71.330 E0.04877 ; perimeter
G1 X47.148 Y71.650 E0.01612 ; perimeter
G1 X46.971 Y72.030 E0.01725 ; perimeter
G1 X46.862 Y72.434 E0.01725 ; perimeter
G1 X46.826 Y72.851 E0.01725 ; perimeter
G1 X46.862 Y73.268 E0.01725 ; perimeter
G1 X46.955 Y73.616 E0.01484 ; perimeter
G1 X47.143 Y74.046 E0.01931 ; perimeter
G1 X47.388 Y74.395 E0.01756 ; perimeter
G1 X47.664 Y74.672 E0.01612 ; perimeter
G1 X76.098 Y98.530 E1.52907 ; perimeter
G1 X75.792 Y98.894 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.803 Y99.499 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.897 Y75.244 E1.55444 ; perimeter
G1 X46.600 Y74.959 E0.01698 ; perimeter
G1 X46.346 Y74.641 E0.01677 ; perimeter
G1 X46.135 Y74.291 E0.01685 ; perimeter
G1 X45.972 Y73.914 E0.01692 ; perimeter
G1 X45.860 Y73.516 E0.01703 ; perimeter
G1 X45.810 Y73.194 E0.01339 ; perimeter
G1 X45.796 Y72.787 E0.01681 ; perimeter
G1 X45.835 Y72.381 E0.01681 ; perimeter
G1 X45.928 Y71.982 E0.01687 ; perimeter
G1 X46.074 Y71.598 E0.01691 ; perimeter
G1 X46.270 Y71.237 E0.01693 ; perimeter
G1 X46.517 Y70.899 E0.01726 ; perimeter
G1 X47.674 Y69.520 E0.07413 ; perimeter
G1 X48.691 Y70.374 E0.05471 ; perimeter
G1 X47.687 Y71.571 E0.06438 ; perimeter
G1 X47.492 Y71.849 E0.01398 ; perimeter
G1 X47.344 Y72.166 E0.01439 ; perimeter
G1 X47.254 Y72.503 E0.01439 ; perimeter
G1 X47.224 Y72.851 E0.01439 ; perimeter
G1 X47.254 Y73.199 E0.01439 ; perimeter
G1 X47.331 Y73.485 E0.01218 ; perimeter
G1 X47.490 Y73.851 E0.01646 ; perimeter
G1 X47.692 Y74.139 E0.01450 ; perimeter
G1 X47.932 Y74.379 E0.01398 ; perimeter
G1 X76.656 Y98.481 E1.54468 ; perimeter
G1 X75.841 Y99.453 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.499 Y99.238 F10800.000 ; move inwards before travel
G1 F8640
G1 X73.316 Y97.341 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X150.617 Y76.119 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.617 Y75.376 E0.03061 ; perimeter
G1 X152.549 Y74.960 E0.08142 ; perimeter
G1 X152.549 Y75.707 E0.03078 ; perimeter
G1 X150.676 Y76.107 E0.07892 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y76.602 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.220 Y75.054 E0.06380 ; perimeter
G1 X152.025 Y74.676 E0.07596 ; perimeter
G1 X152.945 Y74.459 E0.03895 ; perimeter
G1 X152.945 Y76.024 E0.06446 ; perimeter
G1 X151.708 Y76.304 E0.05229 ; perimeter
G1 X150.279 Y76.590 E0.06001 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.396 Y76.243 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.220 Y75.054 E-0.35514 ; wipe and retract
G1 X151.937 Y74.695 E-0.40486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X173.068 Y92.117 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X161.315 Y78.110 E0.75325 ; perimeter
G1 X161.549 Y77.914 E0.01259 ; perimeter
G1 X173.302 Y91.921 E0.75325 ; perimeter
G1 X173.114 Y92.078 E0.01012 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X170.990 Y89.564 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X164.047 Y80.274 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X164.918 Y79.543 E0.04686 ; perimeter
G1 X165.262 Y79.953 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.04686 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X171.939 Y87.910 E0.04686 ; perimeter
G1 X172.283 Y88.320 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.04686 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.172 Y92.547 E0.03705 ; perimeter
G1 X172.891 Y92.523 E0.01159 ; perimeter
G1 X167.233 Y85.780 E0.36263 ; perimeter
G1 X160.884 Y78.214 E0.40687 ; perimeter
G1 X160.909 Y77.933 E0.01159 ; perimeter
G1 X161.598 Y77.355 E0.03705 ; perimeter
G1 X164.008 Y80.228 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X164.096 Y79.716 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X164.967 Y78.984 E0.04686 ; perimeter
G1 X165.821 Y80.002 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.04686 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X171.988 Y87.351 E0.04686 ; perimeter
G1 X172.841 Y88.368 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.04686 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.301 Y92.957 E0.06014 ; perimeter
G1 X172.693 Y92.903 E0.02512 ; perimeter
G1 X166.929 Y86.034 E0.36940 ; perimeter
G1 X160.475 Y78.343 E0.41364 ; perimeter
G1 X160.528 Y77.735 E0.02512 ; perimeter
G1 X161.647 Y76.797 E0.06014 ; perimeter
G1 X164.057 Y79.670 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X164.388 Y79.988 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.967 Y78.984 E-0.26303 ; wipe and retract
G1 X165.821 Y80.002 E-0.30664 ; wipe and retract
G1 X165.189 Y80.532 E-0.19033 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y101.107 E0.04011 ; perimeter
G1 X170.060 Y101.107 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.04011 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.747 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.711 E0.06321 ; perimeter
G1 X170.456 Y100.711 E0.21040 ; perimeter
G1 X170.456 Y102.245 E0.06321 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.807 Y102.643 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.583 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y100.314 E0.08630 ; perimeter
G1 X170.853 Y100.314 E0.24306 ; perimeter
G1 X170.853 Y102.409 E0.08630 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.643 Y103.039 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.567 Y102.640 F10800.000 ; move inwards before travel
G1 X165.972 Y102.131 ; move to first infill point
G1 F7168.59
G1 X166.680 Y101.423 E0.05230 ; infill
G1 X167.390 Y101.423 E0.03707 ; infill
G1 X166.883 Y101.931 E0.03747 ; infill
G1 X167.593 Y101.931 E0.03707 ; infill
G1 X168.101 Y101.423 E0.03747 ; infill
G1 X168.811 Y101.423 E0.03707 ; infill
G1 X168.303 Y101.931 E0.03747 ; infill
G1 X169.013 Y101.931 E0.03707 ; infill
G1 X169.521 Y101.423 E0.03747 ; infill
G1 X169.744 Y101.423 E0.01163 ; infill
G1 X169.744 Y101.910 E0.02544 ; infill
G1 X169.523 Y102.131 E0.01633 ; infill
G1 F8640
G1 X169.744 Y101.910 E-0.07222 ; wipe and retract
G1 X169.744 Y101.423 E-0.11252 ; wipe and retract
G1 X169.521 Y101.423 E-0.05147 ; wipe and retract
G1 X169.013 Y101.931 E-0.16576 ; wipe and retract
G1 X168.303 Y101.931 E-0.16399 ; wipe and retract
G1 X168.811 Y101.423 E-0.16576 ; wipe and retract
G1 X168.688 Y101.423 E-0.02829 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X174.246 Y98.940 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X173.902 Y98.530 E0.02205 ; perimeter
G1 X202.336 Y74.672 E1.52907 ; perimeter
G1 X202.612 Y74.395 E0.01613 ; perimeter
G1 X202.852 Y74.052 E0.01725 ; perimeter
G1 X203.029 Y73.673 E0.01725 ; perimeter
G1 X203.138 Y73.268 E0.01725 ; perimeter
G1 X203.174 Y72.851 E0.01725 ; perimeter
G1 X203.138 Y72.434 E0.01725 ; perimeter
G1 X203.029 Y72.030 E0.01725 ; perimeter
G1 X202.852 Y71.650 E0.01725 ; perimeter
G1 X202.628 Y71.330 E0.01612 ; perimeter
G1 X201.867 Y70.423 E0.04877 ; perimeter
G1 X202.277 Y70.079 E0.02205 ; perimeter
G1 X203.170 Y71.143 E0.05725 ; perimeter
G1 X203.394 Y71.449 E0.01562 ; perimeter
G1 X203.565 Y71.764 E0.01474 ; perimeter
G1 X203.692 Y72.098 E0.01472 ; perimeter
G1 X203.774 Y72.449 E0.01484 ; perimeter
G1 X203.802 Y72.709 E0.01077 ; perimeter
G1 X203.794 Y73.162 E0.01869 ; perimeter
G1 X203.752 Y73.432 E0.01122 ; perimeter
G1 X203.655 Y73.777 E0.01479 ; perimeter
G1 X203.485 Y74.156 E0.01712 ; perimeter
G1 X203.329 Y74.413 E0.01239 ; perimeter
G1 X203.107 Y74.691 E0.01466 ; perimeter
G1 X202.838 Y74.949 E0.01536 ; perimeter
G1 X174.292 Y98.902 E1.53510 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.197 Y99.499 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X173.344 Y98.481 E0.05471 ; perimeter
G1 X202.068 Y74.379 E1.54468 ; perimeter
G1 X202.308 Y74.139 E0.01398 ; perimeter
G1 X202.508 Y73.853 E0.01439 ; perimeter
G1 X202.656 Y73.537 E0.01439 ; perimeter
G1 X202.746 Y73.199 E0.01439 ; perimeter
G1 X202.776 Y72.851 E0.01439 ; perimeter
G1 X202.746 Y72.503 E0.01439 ; perimeter
G1 X202.656 Y72.166 E0.01439 ; perimeter
G1 X202.508 Y71.849 E0.01439 ; perimeter
G1 X202.313 Y71.571 E0.01398 ; perimeter
G1 X201.309 Y70.374 E0.06438 ; perimeter
G1 X202.326 Y69.520 E0.05471 ; perimeter
G1 X203.483 Y70.899 E0.07413 ; perimeter
G1 X203.730 Y71.237 E0.01726 ; perimeter
G1 X203.926 Y71.598 E0.01693 ; perimeter
G1 X204.072 Y71.982 E0.01691 ; perimeter
G1 X204.165 Y72.382 E0.01692 ; perimeter
G1 X204.199 Y72.691 E0.01281 ; perimeter
G1 X204.190 Y73.196 E0.02083 ; perimeter
G1 X204.140 Y73.516 E0.01331 ; perimeter
G1 X204.029 Y73.912 E0.01698 ; perimeter
G1 X203.837 Y74.341 E0.01934 ; perimeter
G1 X203.655 Y74.641 E0.01446 ; perimeter
G1 X203.400 Y74.959 E0.01679 ; perimeter
G1 X203.103 Y75.244 E0.01698 ; perimeter
G1 X174.243 Y99.460 E1.55196 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.128 Y99.105 F10800.000 ; move inwards before travel
G1 F8640
G1 X173.344 Y98.481 E-0.30695 ; wipe and retract
G1 X174.847 Y97.220 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X200.954 Y68.718 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X192.466 Y58.603 E0.54397 ; perimeter
G1 X192.700 Y58.406 E0.01259 ; perimeter
G1 X201.188 Y68.522 E0.54397 ; perimeter
G1 X201.000 Y68.679 E0.01012 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.905 Y69.276 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.456 Y66.358 E0.15696 ; perimeter
G1 X196.828 Y67.724 E0.08756 ; perimeter
G1 X196.484 Y67.314 E0.02205 ; perimeter
G1 X198.112 Y65.948 E0.08756 ; perimeter
G1 X194.701 Y61.882 E0.21861 ; perimeter
G1 X193.073 Y63.249 E0.08756 ; perimeter
G1 X192.729 Y62.839 E0.02205 ; perimeter
G1 X194.357 Y61.472 E0.08756 ; perimeter
G1 X191.908 Y58.554 E0.15696 ; perimeter
G1 X192.597 Y57.976 E0.03705 ; perimeter
G1 X192.877 Y58.000 E0.01160 ; perimeter
G1 X201.618 Y68.418 E0.56023 ; perimeter
G1 X201.594 Y68.698 E0.01159 ; perimeter
G1 X200.951 Y69.238 E0.03457 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.856 Y69.835 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X198.407 Y66.916 E0.15696 ; perimeter
G1 X196.779 Y68.282 E0.08756 ; perimeter
G1 X195.925 Y67.265 E0.05471 ; perimeter
G1 X197.554 Y65.899 E0.08756 ; perimeter
G1 X194.652 Y62.441 E0.18596 ; perimeter
G1 X193.024 Y63.807 E0.08756 ; perimeter
G1 X192.170 Y62.790 E0.05471 ; perimeter
G1 X193.798 Y61.424 E0.08756 ; perimeter
G1 X191.349 Y58.505 E0.15696 ; perimeter
G1 X192.468 Y57.567 E0.06014 ; perimeter
G1 X193.075 Y57.620 E0.02512 ; perimeter
G1 X202.028 Y68.289 E0.57376 ; perimeter
G1 X201.974 Y68.896 E0.02512 ; perimeter
G1 X200.902 Y69.796 E0.05767 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.757 Y69.447 F10800.000 ; move inwards before travel
G1 F8640
G1 X198.747 Y67.308 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X160.226 Y76.553 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.882 Y76.143 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.16390 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X187.798 Y57.029 E1.06111 ; perimeter
G1 X188.121 Y56.796 E0.01642 ; perimeter
G1 X188.406 Y56.639 E0.01338 ; perimeter
G1 X188.732 Y56.512 E0.01443 ; perimeter
G1 X189.067 Y56.431 E0.01418 ; perimeter
G1 X189.490 Y56.392 E0.01751 ; perimeter
G1 X189.771 Y56.398 E0.01157 ; perimeter
G1 X190.117 Y56.452 E0.01443 ; perimeter
G1 X190.454 Y56.550 E0.01443 ; perimeter
G1 X190.775 Y56.691 E0.01447 ; perimeter
G1 X191.055 Y56.859 E0.01344 ; perimeter
G1 X191.333 Y57.082 E0.01469 ; perimeter
G1 X190.876 Y57.466 E0.02457 ; perimeter
G1 X190.693 Y57.337 E0.00922 ; perimeter
G1 X190.329 Y57.168 E0.01654 ; perimeter
G1 X189.892 Y57.056 E0.01857 ; perimeter
G1 X189.495 Y57.024 E0.01640 ; perimeter
G1 X189.141 Y57.055 E0.01465 ; perimeter
G1 X188.707 Y57.161 E0.01840 ; perimeter
G1 X188.299 Y57.350 E0.01854 ; perimeter
G1 X187.985 Y57.570 E0.01579 ; perimeter
G1 X168.261 Y74.121 E1.06070 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X160.272 Y76.514 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.177 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.323 Y76.094 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.18617 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X187.554 Y56.716 E1.05576 ; perimeter
G1 X187.909 Y56.460 E0.01803 ; perimeter
G1 X188.238 Y56.279 E0.01545 ; perimeter
G1 X188.613 Y56.134 E0.01657 ; perimeter
G1 X189.002 Y56.038 E0.01648 ; perimeter
G1 X189.477 Y55.996 E0.01965 ; perimeter
G1 X189.806 Y56.003 E0.01355 ; perimeter
G1 X190.203 Y56.064 E0.01657 ; perimeter
G1 X190.589 Y56.176 E0.01657 ; perimeter
G1 X190.958 Y56.338 E0.01658 ; perimeter
G1 X191.280 Y56.532 E0.01549 ; perimeter
G1 X191.572 Y56.761 E0.01529 ; perimeter
G1 X191.912 Y57.114 E0.02017 ; perimeter
G1 X190.883 Y57.977 E0.05531 ; perimeter
G1 X190.814 Y57.907 E0.00404 ; perimeter
G1 X190.494 Y57.682 E0.01614 ; perimeter
G1 X190.195 Y57.543 E0.01358 ; perimeter
G1 X189.826 Y57.448 E0.01568 ; perimeter
G1 X189.497 Y57.422 E0.01361 ; perimeter
G1 X189.205 Y57.447 E0.01205 ; perimeter
G1 X188.838 Y57.537 E0.01556 ; perimeter
G1 X188.498 Y57.695 E0.01547 ; perimeter
G1 X188.227 Y57.885 E0.01363 ; perimeter
G1 X168.405 Y74.517 E1.06595 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X160.223 Y77.073 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.159 Y76.712 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.323 Y76.094 E-0.30695 ; wipe and retract
G1 X160.826 Y74.833 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y139.253 E0.04011 ; perimeter
G1 X83.970 Y139.253 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.04011 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.968 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.857 E0.06321 ; perimeter
G1 X84.366 Y138.857 E0.21040 ; perimeter
G1 X84.366 Y140.391 E0.06321 ; perimeter
G1 X84.010 Y140.747 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.132 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y138.460 E0.08630 ; perimeter
G1 X84.762 Y138.460 E0.24305 ; perimeter
G1 X84.762 Y140.555 E0.08630 ; perimeter
G1 X84.175 Y141.143 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.802 Y140.960 F10800.000 ; move inwards before travel
G1 F8640
G1 X80.883 Y141.173 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X83.432 Y140.278 ; move to first infill point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.6
G1 X83.654 Y140.056 E0.01632 ; infill
G1 X83.654 Y139.569 E0.02544 ; infill
G1 X83.431 Y139.569 E0.01163 ; infill
G1 X82.923 Y140.077 E0.03747 ; infill
G1 X82.213 Y140.077 E0.03707 ; infill
G1 X82.720 Y139.569 E0.03747 ; infill
G1 X82.010 Y139.569 E0.03707 ; infill
G1 X81.503 Y140.077 E0.03747 ; infill
G1 X80.792 Y140.077 E0.03707 ; infill
G1 X81.300 Y139.569 E0.03747 ; infill
G1 X80.590 Y139.569 E0.03707 ; infill
G1 X79.881 Y140.278 E0.05230 ; infill
G1 F8640
G1 X80.590 Y139.569 E-0.23135 ; wipe and retract
G1 X81.300 Y139.569 E-0.16399 ; wipe and retract
G1 X80.792 Y140.077 E-0.16576 ; wipe and retract
G1 X81.503 Y140.077 E-0.16399 ; wipe and retract
G1 X81.610 Y139.970 E-0.03492 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X76.647 Y130.263 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X76.413 Y130.067 E0.01259 ; perimeter
G1 X88.166 Y116.060 E0.75325 ; perimeter
G1 X88.400 Y116.256 E0.01259 ; perimeter
G1 X76.685 Y130.217 E0.75078 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.824 Y130.669 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.543 Y130.694 E0.01159 ; perimeter
G1 X75.854 Y130.116 E0.03705 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X77.432 Y126.466 E0.04686 ; perimeter
G1 X77.776 Y126.056 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.04686 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X84.453 Y118.099 E0.04686 ; perimeter
G1 X84.797 Y117.689 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.04686 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.806 Y116.080 E0.03705 ; perimeter
G1 X88.830 Y116.360 E0.01159 ; perimeter
G1 X76.862 Y130.623 E0.76703 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.414 Y131.103 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.06014 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X76.874 Y126.515 E0.04686 ; perimeter
G1 X77.727 Y125.497 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.04686 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X83.894 Y118.148 E0.04686 ; perimeter
G1 X84.748 Y117.131 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.04686 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.186 Y115.881 E0.06014 ; perimeter
G1 X89.240 Y116.489 E0.02512 ; perimeter
G1 X77.022 Y131.050 E0.78303 ; perimeter
G1 X76.474 Y131.098 E0.02265 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.280 Y130.726 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.34701 ; wipe and retract
G1 X76.446 Y128.794 E-0.41299 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X99.098 Y114.265 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.166 Y113.853 E0.08139 ; perimeter
G1 X97.166 Y113.106 E0.03077 ; perimeter
G1 X99.098 Y113.522 E0.08142 ; perimeter
G1 X99.098 Y114.205 E0.02813 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y114.748 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.007 Y114.450 E0.06249 ; perimeter
G1 X96.769 Y114.170 E0.05229 ; perimeter
G1 X96.769 Y112.605 E0.06445 ; perimeter
G1 X97.690 Y112.823 E0.03895 ; perimeter
G1 X99.494 Y113.200 E0.07596 ; perimeter
G1 X99.494 Y114.688 E0.06133 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.127 Y114.591 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.007 Y114.450 E-0.34777 ; wipe and retract
G1 X96.769 Y114.170 E-0.29306 ; wipe and retract
G1 X96.769 Y113.654 E-0.11916 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X89.489 Y114.699 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.15587 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X61.730 Y95.717 E1.06070 ; perimeter
G1 X61.416 Y95.496 E0.01579 ; perimeter
G1 X61.008 Y95.307 E0.01854 ; perimeter
G1 X60.574 Y95.201 E0.01840 ; perimeter
G1 X60.220 Y95.170 E0.01465 ; perimeter
G1 X59.823 Y95.202 E0.01640 ; perimeter
G1 X59.386 Y95.315 E0.01857 ; perimeter
G1 X59.022 Y95.483 E0.01654 ; perimeter
G1 X58.839 Y95.612 E0.00922 ; perimeter
G1 X58.382 Y95.228 E0.02460 ; perimeter
G1 X58.598 Y95.050 E0.01154 ; perimeter
G1 X58.944 Y94.835 E0.01678 ; perimeter
G1 X59.261 Y94.696 E0.01427 ; perimeter
G1 X59.597 Y94.598 E0.01443 ; perimeter
G1 X59.944 Y94.545 E0.01443 ; perimeter
G1 X60.294 Y94.537 E0.01443 ; perimeter
G1 X60.582 Y94.569 E0.01195 ; perimeter
G1 X60.987 Y94.660 E0.01711 ; perimeter
G1 X61.309 Y94.786 E0.01421 ; perimeter
G1 X61.616 Y94.954 E0.01443 ; perimeter
G1 X61.915 Y95.173 E0.01528 ; perimeter
G1 X81.649 Y111.732 E1.06121 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X89.833 Y114.289 E0.16390 ; perimeter
G1 X89.528 Y114.653 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.538 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.16626 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X61.488 Y96.031 E1.06595 ; perimeter
G1 X61.217 Y95.841 E0.01363 ; perimeter
G1 X60.876 Y95.683 E0.01547 ; perimeter
G1 X60.509 Y95.594 E0.01556 ; perimeter
G1 X60.218 Y95.568 E0.01205 ; perimeter
G1 X59.889 Y95.594 E0.01361 ; perimeter
G1 X59.520 Y95.689 E0.01568 ; perimeter
G1 X59.221 Y95.828 E0.01358 ; perimeter
G1 X58.900 Y96.053 E0.01614 ; perimeter
G1 X58.832 Y96.123 E0.00404 ; perimeter
G1 X57.807 Y95.264 E0.05508 ; perimeter
G1 X58.078 Y94.965 E0.01659 ; perimeter
G1 X58.366 Y94.728 E0.01541 ; perimeter
G1 X58.758 Y94.484 E0.01902 ; perimeter
G1 X59.125 Y94.322 E0.01651 ; perimeter
G1 X59.512 Y94.210 E0.01657 ; perimeter
G1 X59.909 Y94.149 E0.01657 ; perimeter
G1 X60.311 Y94.140 E0.01657 ; perimeter
G1 X60.648 Y94.177 E0.01395 ; perimeter
G1 X61.104 Y94.280 E0.01926 ; perimeter
G1 X61.477 Y94.426 E0.01649 ; perimeter
G1 X61.830 Y94.619 E0.01657 ; perimeter
G1 X62.160 Y94.861 E0.01688 ; perimeter
G1 X81.793 Y111.335 E1.05580 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X90.392 Y114.240 E0.18617 ; perimeter
G1 X89.577 Y115.212 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.257 Y114.972 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.024 Y113.134 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X48.761 Y106.864 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.527 Y106.668 E0.01259 ; perimeter
G1 X57.015 Y96.552 E0.54397 ; perimeter
G1 X57.249 Y96.749 E0.01259 ; perimeter
G1 X48.800 Y106.818 E0.54150 ; perimeter
M204 S1000 ; adjust acceleration
G1 X48.810 Y107.422 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.121 Y106.844 E0.03705 ; perimeter
G1 X48.096 Y106.564 E0.01159 ; perimeter
G1 X56.838 Y96.146 E0.56023 ; perimeter
G1 X57.118 Y96.122 E0.01159 ; perimeter
G1 X57.807 Y96.700 E0.03705 ; perimeter
G1 X55.358 Y99.619 E0.15696 ; perimeter
G1 X56.986 Y100.985 E0.08756 ; perimeter
G1 X56.642 Y101.395 E0.02205 ; perimeter
G1 X55.014 Y100.029 E0.08756 ; perimeter
G1 X51.603 Y104.094 E0.21861 ; perimeter
G1 X53.231 Y105.460 E0.08756 ; perimeter
G1 X52.887 Y105.870 E0.02205 ; perimeter
G1 X51.259 Y104.504 E0.08756 ; perimeter
G1 X48.848 Y107.377 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X48.859 Y107.981 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X47.740 Y107.043 E0.06014 ; perimeter
G1 X47.687 Y106.435 E0.02512 ; perimeter
G1 X56.640 Y95.766 E0.57376 ; perimeter
G1 X57.247 Y95.713 E0.02512 ; perimeter
G1 X58.365 Y96.651 E0.06014 ; perimeter
G1 X55.916 Y99.570 E0.15696 ; perimeter
G1 X57.545 Y100.936 E0.08756 ; perimeter
G1 X56.691 Y101.953 E0.05471 ; perimeter
G1 X55.063 Y100.587 E0.08756 ; perimeter
G1 X52.161 Y104.045 E0.18596 ; perimeter
G1 X53.790 Y105.411 E0.08756 ; perimeter
G1 X52.936 Y106.428 E0.05471 ; perimeter
G1 X51.308 Y105.062 E0.08756 ; perimeter
G1 X48.897 Y107.935 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X48.787 Y107.587 F10800.000 ; move inwards before travel
G1 F8640
G1 X47.740 Y107.043 E-0.33736 ; wipe and retract
G1 X47.687 Y106.435 E-0.14081 ; wipe and retract
G1 X48.472 Y105.500 E-0.28184 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X75.468 Y137.086 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X46.877 Y113.095 E1.53757 ; perimeter
G1 X46.608 Y112.837 E0.01536 ; perimeter
G1 X46.386 Y112.560 E0.01460 ; perimeter
G1 X46.203 Y112.255 E0.01467 ; perimeter
G1 X46.061 Y111.927 E0.01473 ; perimeter
G1 X45.963 Y111.578 E0.01495 ; perimeter
G1 X45.920 Y111.303 E0.01144 ; perimeter
G1 X45.907 Y110.945 E0.01477 ; perimeter
G1 X45.942 Y110.591 E0.01464 ; perimeter
G1 X46.023 Y110.244 E0.01469 ; perimeter
G1 X46.150 Y109.910 E0.01472 ; perimeter
G1 X46.321 Y109.596 E0.01474 ; perimeter
G1 X46.544 Y109.290 E0.01562 ; perimeter
G1 X47.438 Y108.225 E0.05725 ; perimeter
G1 X47.848 Y108.569 E0.02205 ; perimeter
G1 X47.087 Y109.476 E0.04877 ; perimeter
G1 X46.862 Y109.796 E0.01612 ; perimeter
G1 X46.685 Y110.176 E0.01725 ; perimeter
G1 X46.577 Y110.580 E0.01725 ; perimeter
G1 X46.541 Y110.997 E0.01725 ; perimeter
G1 X46.577 Y111.414 E0.01725 ; perimeter
G1 X46.670 Y111.762 E0.01484 ; perimeter
G1 X46.858 Y112.192 E0.01931 ; perimeter
G1 X47.102 Y112.541 E0.01756 ; perimeter
G1 X47.379 Y112.818 E0.01612 ; perimeter
G1 X75.813 Y136.676 E1.52907 ; perimeter
G1 X75.507 Y137.040 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.517 Y137.645 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.612 Y113.391 E1.55444 ; perimeter
G1 X46.315 Y113.105 E0.01698 ; perimeter
G1 X46.060 Y112.787 E0.01677 ; perimeter
G1 X45.849 Y112.437 E0.01685 ; perimeter
G1 X45.686 Y112.060 E0.01692 ; perimeter
G1 X45.575 Y111.662 E0.01703 ; perimeter
G1 X45.525 Y111.341 E0.01339 ; perimeter
G1 X45.510 Y110.933 E0.01681 ; perimeter
G1 X45.550 Y110.527 E0.01681 ; perimeter
G1 X45.643 Y110.128 E0.01687 ; perimeter
G1 X45.789 Y109.744 E0.01691 ; perimeter
G1 X45.985 Y109.383 E0.01693 ; perimeter
G1 X46.232 Y109.045 E0.01726 ; perimeter
G1 X47.389 Y107.667 E0.07413 ; perimeter
G1 X48.406 Y108.520 E0.05471 ; perimeter
G1 X47.402 Y109.717 E0.06438 ; perimeter
G1 X47.207 Y109.995 E0.01398 ; perimeter
G1 X47.059 Y110.312 E0.01439 ; perimeter
G1 X46.969 Y110.649 E0.01439 ; perimeter
G1 X46.938 Y110.997 E0.01439 ; perimeter
G1 X46.969 Y111.345 E0.01439 ; perimeter
G1 X47.045 Y111.631 E0.01218 ; perimeter
G1 X47.205 Y111.997 E0.01646 ; perimeter
G1 X47.407 Y112.285 E0.01450 ; perimeter
G1 X47.647 Y112.525 E0.01398 ; perimeter
G1 X76.371 Y136.627 E1.54468 ; perimeter
G1 X75.556 Y137.599 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.214 Y137.384 F10800.000 ; move inwards before travel
G1 F8640
G1 X73.031 Y135.487 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X150.332 Y114.265 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.332 Y113.522 E0.03061 ; perimeter
G1 X152.264 Y113.106 E0.08142 ; perimeter
G1 X152.264 Y113.853 E0.03078 ; perimeter
G1 X150.390 Y114.253 E0.07892 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y114.748 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.935 Y113.200 E0.06380 ; perimeter
G1 X151.740 Y112.823 E0.07596 ; perimeter
G1 X152.660 Y112.605 E0.03895 ; perimeter
G1 X152.660 Y114.170 E0.06446 ; perimeter
G1 X151.422 Y114.450 E0.05229 ; perimeter
G1 X149.994 Y114.737 E0.06001 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.111 Y114.389 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.935 Y113.200 E-0.35514 ; wipe and retract
G1 X151.652 Y112.841 E-0.40486 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X172.783 Y130.263 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X161.030 Y116.256 E0.75325 ; perimeter
G1 X161.264 Y116.060 E0.01259 ; perimeter
G1 X173.017 Y130.067 E0.75325 ; perimeter
G1 X172.829 Y130.225 E0.01012 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X170.705 Y127.710 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X163.762 Y118.420 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X164.633 Y117.689 E0.04686 ; perimeter
G1 X164.977 Y118.099 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.04686 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X171.654 Y126.056 E0.04686 ; perimeter
G1 X171.998 Y126.466 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.04686 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X172.886 Y130.694 E0.03705 ; perimeter
G1 X172.606 Y130.669 E0.01159 ; perimeter
G1 X166.948 Y123.926 E0.36263 ; perimeter
G1 X160.599 Y116.360 E0.40687 ; perimeter
G1 X160.624 Y116.080 E0.01159 ; perimeter
G1 X161.313 Y115.502 E0.03705 ; perimeter
G1 X163.723 Y118.374 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X163.810 Y117.862 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X164.682 Y117.131 E0.04686 ; perimeter
G1 X165.535 Y118.148 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.04686 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X171.702 Y125.497 E0.04686 ; perimeter
G1 X172.556 Y126.515 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.04686 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.015 Y131.103 E0.06014 ; perimeter
G1 X172.408 Y131.050 E0.02512 ; perimeter
G1 X166.644 Y124.181 E0.36940 ; perimeter
G1 X160.190 Y116.489 E0.41364 ; perimeter
M73 P90 R12
G1 X160.243 Y115.881 E0.02512 ; perimeter
G1 X161.361 Y114.943 E0.06014 ; perimeter
G1 X163.772 Y117.816 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X164.103 Y118.135 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.682 Y117.131 E-0.26303 ; wipe and retract
G1 X165.535 Y118.148 E-0.30664 ; wipe and retract
G1 X164.904 Y118.678 E-0.19033 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q90 S13
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y139.253 E0.04011 ; perimeter
G1 X169.775 Y139.253 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.04011 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.462 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.857 E0.06321 ; perimeter
G1 X170.171 Y138.857 E0.21040 ; perimeter
G1 X170.171 Y140.391 E0.06321 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.522 Y140.789 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.298 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y138.460 E0.08630 ; perimeter
G1 X170.567 Y138.460 E0.24306 ; perimeter
G1 X170.567 Y140.555 E0.08630 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.358 Y141.185 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.282 Y140.786 F10800.000 ; move inwards before travel
G1 X165.686 Y140.278 ; move to first infill point
G1 F7168.59
G1 X166.395 Y139.569 E0.05230 ; infill
G1 X167.105 Y139.569 E0.03707 ; infill
G1 X166.598 Y140.077 E0.03747 ; infill
G1 X167.308 Y140.077 E0.03707 ; infill
G1 X167.815 Y139.569 E0.03747 ; infill
G1 X168.526 Y139.569 E0.03707 ; infill
G1 X168.018 Y140.077 E0.03747 ; infill
G1 X168.728 Y140.077 E0.03707 ; infill
G1 X169.236 Y139.569 E0.03747 ; infill
G1 X169.459 Y139.569 E0.01163 ; infill
G1 X169.459 Y140.056 E0.02544 ; infill
G1 X169.238 Y140.278 E0.01633 ; infill
G1 F8640
G1 X169.459 Y140.056 E-0.07222 ; wipe and retract
G1 X169.459 Y139.569 E-0.11252 ; wipe and retract
G1 X169.236 Y139.569 E-0.05147 ; wipe and retract
G1 X168.728 Y140.077 E-0.16576 ; wipe and retract
G1 X168.018 Y140.077 E-0.16399 ; wipe and retract
G1 X168.526 Y139.569 E-0.16576 ; wipe and retract
G1 X168.403 Y139.569 E-0.02829 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X173.961 Y137.086 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X173.617 Y136.676 E0.02205 ; perimeter
G1 X202.050 Y112.818 E1.52907 ; perimeter
G1 X202.327 Y112.541 E0.01613 ; perimeter
G1 X202.567 Y112.198 E0.01725 ; perimeter
G1 X202.744 Y111.819 E0.01725 ; perimeter
G1 X202.853 Y111.414 E0.01725 ; perimeter
G1 X202.889 Y110.997 E0.01725 ; perimeter
G1 X202.853 Y110.580 E0.01725 ; perimeter
G1 X202.744 Y110.176 E0.01725 ; perimeter
G1 X202.567 Y109.796 E0.01725 ; perimeter
G1 X202.343 Y109.476 E0.01612 ; perimeter
G1 X201.582 Y108.569 E0.04877 ; perimeter
G1 X201.992 Y108.225 E0.02205 ; perimeter
G1 X202.885 Y109.290 E0.05725 ; perimeter
G1 X203.109 Y109.596 E0.01562 ; perimeter
G1 X203.280 Y109.910 E0.01474 ; perimeter
G1 X203.407 Y110.244 E0.01472 ; perimeter
G1 X203.489 Y110.595 E0.01484 ; perimeter
G1 X203.517 Y110.855 E0.01077 ; perimeter
G1 X203.509 Y111.308 E0.01869 ; perimeter
G1 X203.467 Y111.578 E0.01122 ; perimeter
G1 X203.370 Y111.923 E0.01479 ; perimeter
G1 X203.200 Y112.303 E0.01712 ; perimeter
G1 X203.044 Y112.559 E0.01239 ; perimeter
G1 X202.822 Y112.837 E0.01466 ; perimeter
G1 X202.553 Y113.095 E0.01536 ; perimeter
G1 X174.007 Y137.048 E1.53510 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.912 Y137.645 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X173.059 Y136.627 E0.05471 ; perimeter
G1 X201.782 Y112.525 E1.54468 ; perimeter
G1 X202.022 Y112.285 E0.01398 ; perimeter
G1 X202.223 Y111.999 E0.01439 ; perimeter
G1 X202.370 Y111.683 E0.01439 ; perimeter
G1 X202.461 Y111.345 E0.01439 ; perimeter
G1 X202.491 Y110.997 E0.01439 ; perimeter
G1 X202.461 Y110.649 E0.01439 ; perimeter
G1 X202.370 Y110.312 E0.01439 ; perimeter
G1 X202.223 Y109.995 E0.01439 ; perimeter
G1 X202.028 Y109.717 E0.01398 ; perimeter
G1 X201.024 Y108.520 E0.06438 ; perimeter
G1 X202.041 Y107.667 E0.05471 ; perimeter
G1 X203.197 Y109.045 E0.07413 ; perimeter
G1 X203.445 Y109.383 E0.01726 ; perimeter
G1 X203.641 Y109.744 E0.01693 ; perimeter
G1 X203.787 Y110.128 E0.01691 ; perimeter
G1 X203.880 Y110.528 E0.01692 ; perimeter
G1 X203.914 Y110.837 E0.01281 ; perimeter
G1 X203.904 Y111.343 E0.02083 ; perimeter
G1 X203.855 Y111.662 E0.01331 ; perimeter
G1 X203.744 Y112.059 E0.01698 ; perimeter
G1 X203.552 Y112.487 E0.01934 ; perimeter
G1 X203.370 Y112.787 E0.01446 ; perimeter
G1 X203.115 Y113.105 E0.01679 ; perimeter
G1 X202.817 Y113.391 E0.01698 ; perimeter
G1 X173.958 Y137.606 E1.55196 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.843 Y137.251 F10800.000 ; move inwards before travel
G1 F8640
G1 X173.059 Y136.627 E-0.30695 ; wipe and retract
G1 X174.562 Y135.366 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X200.669 Y106.864 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X192.181 Y96.749 E0.54397 ; perimeter
G1 X192.415 Y96.552 E0.01259 ; perimeter
G1 X200.903 Y106.668 E0.54397 ; perimeter
G1 X200.715 Y106.826 E0.01012 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.620 Y107.422 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.171 Y104.504 E0.15696 ; perimeter
G1 X196.543 Y105.870 E0.08756 ; perimeter
G1 X196.198 Y105.460 E0.02205 ; perimeter
G1 X197.827 Y104.094 E0.08756 ; perimeter
G1 X194.416 Y100.029 E0.21861 ; perimeter
G1 X192.787 Y101.395 E0.08756 ; perimeter
G1 X192.443 Y100.985 E0.02205 ; perimeter
G1 X194.072 Y99.619 E0.08756 ; perimeter
G1 X191.623 Y96.700 E0.15696 ; perimeter
G1 X192.311 Y96.122 E0.03705 ; perimeter
G1 X192.592 Y96.146 E0.01160 ; perimeter
G1 X201.333 Y106.564 E0.56023 ; perimeter
G1 X201.309 Y106.844 E0.01159 ; perimeter
G1 X200.666 Y107.384 E0.03457 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.571 Y107.981 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X198.122 Y105.062 E0.15696 ; perimeter
G1 X196.494 Y106.428 E0.08756 ; perimeter
G1 X195.640 Y105.411 E0.05471 ; perimeter
G1 X197.268 Y104.045 E0.08756 ; perimeter
G1 X194.367 Y100.587 E0.18596 ; perimeter
G1 X192.739 Y101.953 E0.08756 ; perimeter
G1 X191.885 Y100.936 E0.05471 ; perimeter
G1 X193.513 Y99.570 E0.08756 ; perimeter
G1 X191.064 Y96.651 E0.15696 ; perimeter
G1 X192.182 Y95.713 E0.06014 ; perimeter
G1 X192.790 Y95.766 E0.02512 ; perimeter
G1 X201.742 Y106.435 E0.57376 ; perimeter
G1 X201.689 Y107.043 E0.02512 ; perimeter
G1 X200.617 Y107.942 E0.05767 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.472 Y107.593 F10800.000 ; move inwards before travel
G1 F8640
G1 X198.462 Y105.455 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
G1 X159.940 Y114.699 ; move to first perimeter point
G1 Z20.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.596 Y114.289 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.16390 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X187.513 Y95.175 E1.06111 ; perimeter
G1 X187.836 Y94.942 E0.01642 ; perimeter
G1 X188.121 Y94.786 E0.01338 ; perimeter
G1 X188.447 Y94.659 E0.01443 ; perimeter
G1 X188.782 Y94.577 E0.01418 ; perimeter
G1 X189.205 Y94.538 E0.01751 ; perimeter
G1 X189.486 Y94.545 E0.01157 ; perimeter
G1 X189.832 Y94.598 E0.01443 ; perimeter
G1 X190.169 Y94.696 E0.01443 ; perimeter
G1 X190.490 Y94.837 E0.01447 ; perimeter
G1 X190.770 Y95.005 E0.01344 ; perimeter
G1 X191.048 Y95.229 E0.01469 ; perimeter
G1 X190.591 Y95.612 E0.02457 ; perimeter
G1 X190.408 Y95.483 E0.00922 ; perimeter
G1 X190.043 Y95.315 E0.01654 ; perimeter
G1 X189.607 Y95.202 E0.01857 ; perimeter
G1 X189.210 Y95.170 E0.01640 ; perimeter
G1 X188.856 Y95.201 E0.01465 ; perimeter
G1 X188.422 Y95.307 E0.01840 ; perimeter
G1 X188.014 Y95.496 E0.01854 ; perimeter
G1 X187.700 Y95.717 E0.01579 ; perimeter
G1 X167.976 Y112.267 E1.06070 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.986 Y114.661 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.892 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.038 Y114.240 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.18617 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X187.269 Y94.862 E1.05576 ; perimeter
G1 X187.624 Y94.606 E0.01803 ; perimeter
G1 X187.953 Y94.426 E0.01545 ; perimeter
G1 X188.328 Y94.280 E0.01657 ; perimeter
G1 X188.716 Y94.185 E0.01648 ; perimeter
G1 X189.192 Y94.142 E0.01965 ; perimeter
G1 X189.520 Y94.149 E0.01355 ; perimeter
G1 X189.918 Y94.210 E0.01657 ; perimeter
G1 X190.304 Y94.322 E0.01657 ; perimeter
G1 X190.673 Y94.484 E0.01658 ; perimeter
G1 X190.995 Y94.678 E0.01549 ; perimeter
G1 X191.287 Y94.907 E0.01529 ; perimeter
G1 X191.627 Y95.260 E0.02017 ; perimeter
G1 X190.598 Y96.123 E0.05531 ; perimeter
G1 X190.529 Y96.053 E0.00404 ; perimeter
G1 X190.209 Y95.828 E0.01614 ; perimeter
G1 X189.909 Y95.689 E0.01358 ; perimeter
G1 X189.541 Y95.594 E0.01568 ; perimeter
G1 X189.212 Y95.568 E0.01361 ; perimeter
G1 X188.920 Y95.594 E0.01205 ; perimeter
G1 X188.553 Y95.683 E0.01556 ; perimeter
G1 X188.212 Y95.841 E0.01547 ; perimeter
G1 X187.942 Y96.031 E0.01363 ; perimeter
G1 X168.120 Y112.663 E1.06595 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X159.938 Y115.219 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.874 Y114.858 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;20.75


G1 F8640
G1 X159.038 Y114.240 E-0.30695 ; wipe and retract
G1 X160.541 Y112.979 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;20.75
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y101.107 E0.04011 ; perimeter
G1 X84.255 Y101.107 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.04011 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.253 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.711 E0.06321 ; perimeter
G1 X84.651 Y100.711 E0.21040 ; perimeter
G1 X84.651 Y102.245 E0.06321 ; perimeter
G1 X84.296 Y102.600 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.417 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y100.314 E0.08630 ; perimeter
G1 X85.047 Y100.314 E0.24305 ; perimeter
G1 X85.047 Y102.409 E0.08630 ; perimeter
G1 X84.460 Y102.997 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.087 Y102.814 F10800.000 ; move inwards before travel
G1 X84.028 Y102.131 ; move to first infill point
G1 F7168.6
G1 X83.320 Y101.423 E0.05230 ; infill
G1 X82.610 Y101.423 E0.03707 ; infill
G1 X83.117 Y101.931 E0.03747 ; infill
G1 X82.407 Y101.931 E0.03707 ; infill
G1 X81.899 Y101.423 E0.03747 ; infill
G1 X81.189 Y101.423 E0.03707 ; infill
G1 X81.697 Y101.931 E0.03747 ; infill
G1 X80.987 Y101.931 E0.03707 ; infill
G1 X80.479 Y101.423 E0.03747 ; infill
G1 X80.256 Y101.423 E0.01163 ; infill
G1 X80.256 Y101.910 E0.02544 ; infill
G1 X80.477 Y102.131 E0.01631 ; infill
G1 F8640
G1 X80.256 Y101.910 E-0.07217 ; wipe and retract
G1 X80.256 Y101.423 E-0.11255 ; wipe and retract
G1 X80.479 Y101.423 E-0.05143 ; wipe and retract
G1 X80.987 Y101.931 E-0.16576 ; wipe and retract
G1 X81.697 Y101.931 E-0.16399 ; wipe and retract
G1 X81.189 Y101.423 E-0.16576 ; wipe and retract
G1 X81.312 Y101.423 E-0.02834 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X77.263 Y92.112 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X76.957 Y92.138 E0.01263 ; perimeter
G1 X76.698 Y91.921 E0.01396 ; perimeter
G1 X88.451 Y77.914 E0.75325 ; perimeter
G1 X88.711 Y78.132 E0.01396 ; perimeter
G1 X88.737 Y78.437 E0.01263 ; perimeter
G1 X77.302 Y92.066 E0.73291 ; perimeter
M204 S1000 ; adjust acceleration
G1 X77.461 Y92.492 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.828 Y92.547 E0.02616 ; perimeter
G1 X76.140 Y91.969 E0.03705 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X77.779 Y88.372 E0.04352 ; perimeter
G1 X78.124 Y87.962 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.04352 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X84.800 Y80.005 E0.04352 ; perimeter
G1 X85.144 Y79.595 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.04352 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X89.091 Y77.933 E0.03705 ; perimeter
G1 X89.146 Y78.566 E0.02616 ; perimeter
G1 X77.500 Y92.446 E0.74644 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.699 Y92.957 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.06014 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X77.221 Y88.421 E0.04352 ; perimeter
G1 X78.075 Y87.403 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.04352 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X84.242 Y80.054 E0.04352 ; perimeter
G1 X85.095 Y79.037 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.04352 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.472 Y77.735 E0.06014 ; perimeter
G1 X89.556 Y78.695 E0.03969 ; perimeter
G1 X77.659 Y92.873 E0.76243 ; perimeter
G1 X76.759 Y92.951 E0.03721 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.567 Y92.579 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.34701 ; wipe and retract
G1 X76.731 Y90.648 E-0.41299 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X99.383 Y75.972 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.451 Y75.558 E0.08141 ; perimeter
G1 X97.451 Y74.960 E0.02465 ; perimeter
G1 X99.383 Y75.376 E0.08142 ; perimeter
G1 X99.383 Y75.912 E0.02210 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.780 Y76.456 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.384 Y76.176 E0.05863 ; perimeter
G1 X97.055 Y75.875 E0.05616 ; perimeter
G1 X97.055 Y74.459 E0.05833 ; perimeter
G1 X97.948 Y74.670 E0.03781 ; perimeter
G1 X99.780 Y75.054 E0.07710 ; perimeter
G1 X99.780 Y76.396 E0.05529 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.410 Y76.304 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.384 Y76.176 E-0.32619 ; wipe and retract
G1 X97.055 Y75.875 E-0.31475 ; wipe and retract
G1 X97.055 Y75.359 E-0.11906 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X89.774 Y76.553 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.15587 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X62.015 Y57.571 E1.06069 ; perimeter
G1 X61.705 Y57.352 E0.01562 ; perimeter
G1 X61.285 Y57.158 E0.01908 ; perimeter
G1 X60.841 Y57.053 E0.01879 ; perimeter
G1 X60.509 Y57.024 E0.01373 ; perimeter
G1 X60.118 Y57.054 E0.01616 ; perimeter
G1 X59.671 Y57.168 E0.01897 ; perimeter
G1 X59.311 Y57.335 E0.01634 ; perimeter
G1 X59.125 Y57.466 E0.00941 ; perimeter
G1 X58.667 Y57.082 E0.02461 ; perimeter
G1 X58.874 Y56.911 E0.01105 ; perimeter
G1 X59.230 Y56.689 E0.01731 ; perimeter
G1 X59.547 Y56.549 E0.01424 ; perimeter
G1 X59.883 Y56.452 E0.01443 ; perimeter
G1 X60.229 Y56.398 E0.01443 ; perimeter
G1 X60.579 Y56.391 E0.01443 ; perimeter
G1 X60.843 Y56.420 E0.01094 ; perimeter
G1 X61.274 Y56.515 E0.01818 ; perimeter
G1 X61.594 Y56.639 E0.01414 ; perimeter
G1 X61.901 Y56.808 E0.01443 ; perimeter
G1 X62.200 Y57.027 E0.01527 ; perimeter
G1 X81.934 Y73.586 E1.06121 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.118 Y76.143 E0.16390 ; perimeter
G1 X89.813 Y76.507 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.823 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.16626 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X61.773 Y57.885 E1.06594 ; perimeter
G1 X61.506 Y57.697 E0.01346 ; perimeter
G1 X61.155 Y57.534 E0.01594 ; perimeter
G1 X60.778 Y57.446 E0.01596 ; perimeter
G1 X60.507 Y57.422 E0.01122 ; perimeter
G1 X60.182 Y57.447 E0.01339 ; perimeter
G1 X59.805 Y57.543 E0.01606 ; perimeter
G1 X59.510 Y57.679 E0.01337 ; perimeter
G1 X59.181 Y57.912 E0.01661 ; perimeter
G1 X59.116 Y57.977 E0.00376 ; perimeter
G1 X58.092 Y57.117 E0.05508 ; perimeter
G1 X58.358 Y56.824 E0.01631 ; perimeter
G1 X58.641 Y56.589 E0.01516 ; perimeter
G1 X59.044 Y56.337 E0.01957 ; perimeter
G1 X59.411 Y56.176 E0.01650 ; perimeter
G1 X59.797 Y56.064 E0.01657 ; perimeter
G1 X60.195 Y56.003 E0.01657 ; perimeter
G1 X60.597 Y55.994 E0.01657 ; perimeter
G1 X60.908 Y56.028 E0.01290 ; perimeter
G1 X61.390 Y56.135 E0.02032 ; perimeter
G1 X61.762 Y56.279 E0.01647 ; perimeter
G1 X62.115 Y56.473 E0.01657 ; perimeter
G1 X62.445 Y56.715 E0.01688 ; perimeter
G1 X82.078 Y73.189 E1.05580 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X90.677 Y76.094 E0.18617 ; perimeter
G1 X89.862 Y77.065 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.543 Y76.826 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.309 Y74.987 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X49.046 Y68.718 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.787 Y68.500 E0.01396 ; perimeter
G1 X48.760 Y68.195 E0.01263 ; perimeter
G1 X56.969 Y58.412 E0.52611 ; perimeter
G1 X57.274 Y58.385 E0.01263 ; perimeter
G1 X57.534 Y58.603 E0.01396 ; perimeter
G1 X49.085 Y68.672 E0.54150 ; perimeter
M204 S1000 ; adjust acceleration
G1 X49.095 Y69.276 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.406 Y68.698 E0.03705 ; perimeter
G1 X48.351 Y68.066 E0.02616 ; perimeter
G1 X56.771 Y58.031 E0.53963 ; perimeter
G1 X57.403 Y57.976 E0.02616 ; perimeter
G1 X58.092 Y58.554 E0.03705 ; perimeter
G1 X55.643 Y61.472 E0.15696 ; perimeter
G1 X56.996 Y62.607 E0.07273 ; perimeter
G1 X56.652 Y63.017 E0.02205 ; perimeter
G1 X55.299 Y61.882 E0.07273 ; perimeter
G1 X51.888 Y65.948 E0.21861 ; perimeter
G1 X53.241 Y67.082 E0.07273 ; perimeter
G1 X52.896 Y67.493 E0.02205 ; perimeter
G1 X51.544 Y66.358 E0.07273 ; perimeter
G1 X49.134 Y69.230 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X49.144 Y69.835 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.026 Y68.896 E0.06014 ; perimeter
G1 X47.942 Y67.937 E0.03969 ; perimeter
G1 X56.573 Y57.651 E0.55316 ; perimeter
G1 X57.532 Y57.567 E0.03969 ; perimeter
G1 X58.651 Y58.505 E0.06014 ; perimeter
G1 X56.202 Y61.424 E0.15696 ; perimeter
G1 X57.554 Y62.558 E0.07273 ; perimeter
G1 X56.700 Y63.576 E0.05471 ; perimeter
G1 X55.348 Y62.441 E0.07273 ; perimeter
G1 X52.446 Y65.899 E0.18596 ; perimeter
G1 X53.799 Y67.034 E0.07273 ; perimeter
G1 X52.945 Y68.051 E0.05471 ; perimeter
G1 X51.593 Y66.916 E0.07273 ; perimeter
G1 X49.182 Y69.789 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X49.063 Y69.443 F10800.000 ; move inwards before travel
G1 F8640
G1 X48.026 Y68.896 E-0.33736 ; wipe and retract
G1 X47.942 Y67.937 E-0.22244 ; wipe and retract
G1 X48.499 Y67.272 E-0.20020 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X75.562 Y98.780 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.162 Y74.949 E1.52727 ; perimeter
G1 X46.892 Y74.690 E0.01545 ; perimeter
G1 X46.669 Y74.411 E0.01468 ; perimeter
G1 X46.485 Y74.104 E0.01475 ; perimeter
G1 X46.344 Y73.774 E0.01480 ; perimeter
G1 X46.247 Y73.426 E0.01484 ; perimeter
G1 X46.198 Y73.069 E0.01487 ; perimeter
G1 X46.198 Y72.707 E0.01489 ; perimeter
G1 X46.247 Y72.349 E0.01490 ; perimeter
G1 X46.347 Y71.990 E0.01534 ; perimeter
G1 X46.432 Y71.770 E0.00974 ; perimeter
G1 X46.606 Y71.450 E0.01498 ; perimeter
G1 X46.829 Y71.144 E0.01561 ; perimeter
G1 X47.723 Y70.079 E0.05727 ; perimeter
G1 X48.133 Y70.423 E0.02205 ; perimeter
G1 X47.372 Y71.330 E0.04877 ; perimeter
G1 X47.148 Y71.650 E0.01612 ; perimeter
G1 X46.971 Y72.030 E0.01725 ; perimeter
G1 X46.862 Y72.434 E0.01725 ; perimeter
G1 X46.826 Y72.851 E0.01725 ; perimeter
G1 X46.862 Y73.268 E0.01725 ; perimeter
G1 X46.971 Y73.673 E0.01725 ; perimeter
G1 X47.148 Y74.052 E0.01725 ; perimeter
G1 X47.388 Y74.395 E0.01725 ; perimeter
G1 X47.664 Y74.672 E0.01612 ; perimeter
G1 X75.906 Y98.369 E1.51877 ; perimeter
G1 X75.601 Y98.734 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.611 Y99.338 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.897 Y75.244 E1.54413 ; perimeter
G1 X46.598 Y74.957 E0.01708 ; perimeter
G1 X46.343 Y74.637 E0.01686 ; perimeter
G1 X46.132 Y74.285 E0.01694 ; perimeter
G1 X45.969 Y73.905 E0.01700 ; perimeter
G1 X45.858 Y73.507 E0.01705 ; perimeter
G1 X45.802 Y73.096 E0.01708 ; perimeter
G1 X45.802 Y72.681 E0.01710 ; perimeter
G1 X45.858 Y72.269 E0.01711 ; perimeter
G1 X45.970 Y71.865 E0.01727 ; perimeter
G1 X46.072 Y71.603 E0.01159 ; perimeter
G1 X46.269 Y71.238 E0.01708 ; perimeter
G1 X46.517 Y70.899 E0.01731 ; perimeter
G1 X47.674 Y69.520 E0.07414 ; perimeter
G1 X48.691 Y70.374 E0.05471 ; perimeter
G1 X47.687 Y71.571 E0.06438 ; perimeter
G1 X47.492 Y71.849 E0.01398 ; perimeter
G1 X47.344 Y72.166 E0.01439 ; perimeter
G1 X47.254 Y72.503 E0.01439 ; perimeter
G1 X47.224 Y72.851 E0.01439 ; perimeter
G1 X47.254 Y73.199 E0.01439 ; perimeter
G1 X47.344 Y73.537 E0.01439 ; perimeter
G1 X47.492 Y73.853 E0.01439 ; perimeter
G1 X47.692 Y74.139 E0.01439 ; perimeter
G1 X47.932 Y74.379 E0.01398 ; perimeter
G1 X76.465 Y98.321 E1.53438 ; perimeter
G1 X75.650 Y99.292 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.308 Y99.077 F10800.000 ; move inwards before travel
G1 F8640
G1 X73.125 Y97.180 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X150.617 Y75.972 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.617 Y75.376 E0.02457 ; perimeter
G1 X152.549 Y74.960 E0.08142 ; perimeter
G1 X152.549 Y75.558 E0.02465 ; perimeter
G1 X150.676 Y75.960 E0.07893 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.220 Y76.456 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.220 Y75.054 E0.05776 ; perimeter
G1 X152.052 Y74.670 E0.07710 ; perimeter
G1 X152.945 Y74.459 E0.03781 ; perimeter
G1 X152.945 Y75.875 E0.05834 ; perimeter
G1 X151.616 Y76.176 E0.05616 ; perimeter
G1 X150.279 Y76.444 E0.05616 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.396 Y76.096 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.220 Y75.054 E-0.32130 ; wipe and retract
G1 X152.052 Y74.670 E-0.43215 ; wipe and retract
G1 X152.080 Y74.664 E-0.00655 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X172.737 Y92.112 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X161.263 Y78.437 E0.73538 ; perimeter
G1 X161.289 Y78.132 E0.01263 ; perimeter
G1 X161.549 Y77.914 E0.01396 ; perimeter
G1 X173.302 Y91.921 E0.75325 ; perimeter
G1 X173.043 Y92.138 E0.01396 ; perimeter
G1 X172.797 Y92.117 E0.01016 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.539 Y92.492 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.854 Y78.566 E0.74891 ; perimeter
G1 X160.909 Y77.933 E0.02616 ; perimeter
G1 X161.598 Y77.355 E0.03705 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X164.856 Y79.595 E0.04352 ; perimeter
G1 X165.200 Y80.005 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.04352 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X171.876 Y87.962 E0.04352 ; perimeter
G1 X172.221 Y88.372 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.04352 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.172 Y92.547 E0.03705 ; perimeter
G1 X172.599 Y92.497 E0.02369 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X170.477 Y89.981 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X164.096 Y79.716 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X164.905 Y79.037 E0.04352 ; perimeter
G1 X165.758 Y80.054 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.04352 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X171.925 Y87.403 E0.04352 ; perimeter
G1 X172.779 Y88.421 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.04352 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.301 Y92.957 E0.06014 ; perimeter
G1 X172.341 Y92.873 E0.03969 ; perimeter
G1 X160.444 Y78.695 E0.76243 ; perimeter
G1 X160.528 Y77.735 E0.03969 ; perimeter
G1 X161.647 Y76.797 E0.06014 ; perimeter
G1 X164.057 Y79.670 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X164.388 Y79.988 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.905 Y79.037 E-0.24430 ; wipe and retract
G1 X165.758 Y80.054 E-0.30664 ; wipe and retract
G1 X165.065 Y80.636 E-0.20906 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y101.107 E0.04011 ; perimeter
G1 X170.060 Y101.107 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.04011 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.747 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.711 E0.06321 ; perimeter
G1 X170.456 Y100.711 E0.21040 ; perimeter
G1 X170.456 Y102.245 E0.06321 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.807 Y102.643 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.583 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y100.314 E0.08630 ; perimeter
G1 X170.853 Y100.314 E0.24306 ; perimeter
G1 X170.853 Y102.409 E0.08630 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.643 Y103.039 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.567 Y102.640 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.953 Y102.409 E-0.21581 ; wipe and retract
G1 X164.953 Y100.314 E-0.48370 ; wipe and retract
G1 X165.215 Y100.314 E-0.06049 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X166.282 Y102.131 ; move to first infill point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.59
G1 X166.061 Y101.910 E0.01631 ; infill
G1 X166.061 Y101.423 E0.02544 ; infill
G1 X166.284 Y101.423 E0.01163 ; infill
G1 X166.792 Y101.931 E0.03747 ; infill
G1 X167.502 Y101.931 E0.03707 ; infill
G1 X166.994 Y101.423 E0.03747 ; infill
G1 X167.704 Y101.423 E0.03707 ; infill
G1 X168.212 Y101.931 E0.03747 ; infill
G1 X168.922 Y101.931 E0.03707 ; infill
G1 X168.415 Y101.423 E0.03747 ; infill
G1 X169.125 Y101.423 E0.03707 ; infill
G1 X169.833 Y102.131 E0.05230 ; infill
G1 F8640
G1 X169.125 Y101.423 E-0.23135 ; wipe and retract
G1 X168.415 Y101.423 E-0.16399 ; wipe and retract
G1 X168.922 Y101.931 E-0.16576 ; wipe and retract
G1 X168.212 Y101.931 E-0.16399 ; wipe and retract
G1 X168.105 Y101.824 E-0.03492 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X174.438 Y98.780 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X174.094 Y98.369 E0.02205 ; perimeter
G1 X202.336 Y74.672 E1.51877 ; perimeter
G1 X202.612 Y74.395 E0.01613 ; perimeter
G1 X202.852 Y74.052 E0.01725 ; perimeter
G1 X203.029 Y73.673 E0.01725 ; perimeter
G1 X203.138 Y73.268 E0.01725 ; perimeter
G1 X203.174 Y72.851 E0.01725 ; perimeter
G1 X203.138 Y72.434 E0.01725 ; perimeter
G1 X203.029 Y72.030 E0.01725 ; perimeter
G1 X202.852 Y71.650 E0.01725 ; perimeter
G1 X202.628 Y71.330 E0.01612 ; perimeter
G1 X201.867 Y70.423 E0.04877 ; perimeter
G1 X202.277 Y70.079 E0.02205 ; perimeter
G1 X203.171 Y71.144 E0.05727 ; perimeter
G1 X203.394 Y71.450 E0.01561 ; perimeter
G1 X203.566 Y71.767 E0.01487 ; perimeter
G1 X203.693 Y72.103 E0.01479 ; perimeter
G1 X203.775 Y72.457 E0.01495 ; perimeter
G1 X203.801 Y72.693 E0.00981 ; perimeter
G1 X203.792 Y73.176 E0.01988 ; perimeter
G1 X203.754 Y73.421 E0.01023 ; perimeter
G1 X203.658 Y73.768 E0.01483 ; perimeter
G1 X203.475 Y74.175 E0.01837 ; perimeter
G1 X203.332 Y74.409 E0.01132 ; perimeter
G1 X203.108 Y74.690 E0.01476 ; perimeter
G1 X202.838 Y74.949 E0.01545 ; perimeter
G1 X174.484 Y98.741 E1.52479 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.389 Y99.338 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X173.535 Y98.321 E0.05471 ; perimeter
G1 X202.068 Y74.379 E1.53438 ; perimeter
G1 X202.308 Y74.139 E0.01398 ; perimeter
G1 X202.508 Y73.853 E0.01439 ; perimeter
G1 X202.656 Y73.537 E0.01439 ; perimeter
G1 X202.746 Y73.199 E0.01439 ; perimeter
G1 X202.776 Y72.851 E0.01439 ; perimeter
G1 X202.746 Y72.503 E0.01439 ; perimeter
G1 X202.656 Y72.166 E0.01439 ; perimeter
G1 X202.508 Y71.849 E0.01439 ; perimeter
G1 X202.313 Y71.571 E0.01398 ; perimeter
G1 X201.309 Y70.374 E0.06438 ; perimeter
G1 X202.326 Y69.520 E0.05471 ; perimeter
G1 X203.483 Y70.899 E0.07414 ; perimeter
G1 X203.731 Y71.238 E0.01731 ; perimeter
G1 X203.928 Y71.602 E0.01703 ; perimeter
G1 X204.073 Y71.988 E0.01699 ; perimeter
G1 X204.167 Y72.390 E0.01702 ; perimeter
G1 X204.198 Y72.675 E0.01182 ; perimeter
G1 X204.188 Y73.210 E0.02202 ; perimeter
G1 X204.142 Y73.505 E0.01229 ; perimeter
G1 X204.032 Y73.903 E0.01705 ; perimeter
G1 X203.826 Y74.360 E0.02062 ; perimeter
G1 X203.658 Y74.637 E0.01336 ; perimeter
G1 X203.402 Y74.957 E0.01689 ; perimeter
G1 X203.103 Y75.244 E0.01708 ; perimeter
G1 X174.435 Y99.299 E1.54166 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.319 Y98.944 F10800.000 ; move inwards before travel
G1 F8640
G1 X173.535 Y98.321 E-0.30695 ; wipe and retract
G1 X175.038 Y97.059 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X200.954 Y68.718 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X192.466 Y58.603 E0.54397 ; perimeter
G1 X192.726 Y58.385 E0.01396 ; perimeter
G1 X193.031 Y58.412 E0.01263 ; perimeter
G1 X201.240 Y68.195 E0.52611 ; perimeter
G1 X201.213 Y68.500 E0.01263 ; perimeter
G1 X201.000 Y68.679 E0.01148 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.905 Y69.276 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.456 Y66.358 E0.15696 ; perimeter
G1 X197.104 Y67.493 E0.07273 ; perimeter
G1 X196.759 Y67.082 E0.02205 ; perimeter
G1 X198.112 Y65.948 E0.07273 ; perimeter
G1 X194.701 Y61.882 E0.21861 ; perimeter
G1 X193.348 Y63.017 E0.07273 ; perimeter
G1 X193.004 Y62.607 E0.02205 ; perimeter
G1 X194.357 Y61.472 E0.07273 ; perimeter
G1 X191.908 Y58.554 E0.15696 ; perimeter
G1 X192.597 Y57.976 E0.03705 ; perimeter
G1 X193.229 Y58.031 E0.02616 ; perimeter
G1 X201.649 Y68.066 E0.53963 ; perimeter
G1 X201.594 Y68.698 E0.02616 ; perimeter
G1 X200.951 Y69.238 E0.03457 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.856 Y69.835 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.407 Y66.916 E0.15696 ; perimeter
G1 X197.055 Y68.051 E0.07273 ; perimeter
G1 X196.201 Y67.034 E0.05471 ; perimeter
G1 X197.554 Y65.899 E0.07273 ; perimeter
G1 X194.652 Y62.441 E0.18596 ; perimeter
G1 X193.300 Y63.576 E0.07273 ; perimeter
G1 X192.446 Y62.558 E0.05471 ; perimeter
G1 X193.798 Y61.424 E0.07273 ; perimeter
G1 X191.349 Y58.505 E0.15696 ; perimeter
G1 X192.468 Y57.567 E0.06014 ; perimeter
G1 X193.427 Y57.651 E0.03969 ; perimeter
G1 X202.058 Y67.937 E0.55316 ; perimeter
G1 X201.974 Y68.896 E0.03969 ; perimeter
G1 X200.902 Y69.796 E0.05767 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.747 Y69.450 F10800.000 ; move inwards before travel
G1 F8640
G1 X198.747 Y67.308 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X160.226 Y76.553 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.882 Y76.143 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.16390 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X187.796 Y57.030 E1.06102 ; perimeter
G1 X188.144 Y56.783 E0.01760 ; perimeter
G1 X188.406 Y56.639 E0.01228 ; perimeter
G1 X188.732 Y56.512 E0.01443 ; perimeter
G1 X189.065 Y56.431 E0.01411 ; perimeter
G1 X189.514 Y56.393 E0.01855 ; perimeter
G1 X189.771 Y56.398 E0.01059 ; perimeter
G1 X190.117 Y56.452 E0.01443 ; perimeter
G1 X190.453 Y56.549 E0.01443 ; perimeter
G1 X190.775 Y56.691 E0.01448 ; perimeter
G1 X191.050 Y56.856 E0.01322 ; perimeter
G1 X191.332 Y57.083 E0.01491 ; perimeter
G1 X190.875 Y57.466 E0.02457 ; perimeter
G1 X190.689 Y57.335 E0.00941 ; perimeter
G1 X190.329 Y57.168 E0.01634 ; perimeter
G1 X189.882 Y57.054 E0.01897 ; perimeter
G1 X189.491 Y57.024 E0.01616 ; perimeter
G1 X189.159 Y57.053 E0.01373 ; perimeter
G1 X188.715 Y57.158 E0.01879 ; perimeter
G1 X188.295 Y57.352 E0.01908 ; perimeter
G1 X187.985 Y57.571 E0.01562 ; perimeter
G1 X168.261 Y74.121 E1.06069 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X160.272 Y76.514 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.177 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.323 Y76.094 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.18617 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X187.554 Y56.716 E1.05573 ; perimeter
G1 X187.934 Y56.446 E0.01920 ; perimeter
G1 X188.238 Y56.279 E0.01430 ; perimeter
G1 X188.613 Y56.134 E0.01657 ; perimeter
G1 X189.001 Y56.039 E0.01646 ; perimeter
G1 X189.501 Y55.996 E0.02069 ; perimeter
G1 X189.805 Y56.003 E0.01253 ; perimeter
G1 X190.203 Y56.064 E0.01657 ; perimeter
G1 X190.589 Y56.176 E0.01657 ; perimeter
G1 X190.958 Y56.338 E0.01659 ; perimeter
G1 X191.275 Y56.529 E0.01525 ; perimeter
G1 X191.562 Y56.753 E0.01502 ; perimeter
G1 X191.911 Y57.114 E0.02070 ; perimeter
G1 X190.884 Y57.977 E0.05527 ; perimeter
G1 X190.819 Y57.912 E0.00376 ; perimeter
G1 X190.490 Y57.679 E0.01661 ; perimeter
G1 X190.195 Y57.543 E0.01337 ; perimeter
G1 X189.818 Y57.447 E0.01606 ; perimeter
G1 X189.493 Y57.422 E0.01339 ; perimeter
G1 X189.222 Y57.446 E0.01122 ; perimeter
G1 X188.845 Y57.534 E0.01596 ; perimeter
G1 X188.494 Y57.697 E0.01594 ; perimeter
G1 X188.227 Y57.885 E0.01346 ; perimeter
G1 X168.405 Y74.517 E1.06594 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X160.223 Y77.073 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.159 Y76.712 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.323 Y76.094 E-0.30695 ; wipe and retract
G1 X160.826 Y74.833 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y139.253 E0.04011 ; perimeter
G1 X83.970 Y139.253 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.04011 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.968 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.857 E0.06321 ; perimeter
G1 X84.366 Y138.857 E0.21040 ; perimeter
G1 X84.366 Y140.391 E0.06321 ; perimeter
G1 X84.010 Y140.747 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.132 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y138.460 E0.08630 ; perimeter
G1 X84.762 Y138.460 E0.24305 ; perimeter
G1 X84.762 Y140.555 E0.08630 ; perimeter
G1 X84.175 Y141.143 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.802 Y140.960 F10800.000 ; move inwards before travel
G1 X83.743 Y140.278 ; move to first infill point
G1 F7168.6
G1 X83.035 Y139.569 E0.05230 ; infill
G1 X82.324 Y139.569 E0.03707 ; infill
G1 X82.832 Y140.077 E0.03747 ; infill
G1 X82.122 Y140.077 E0.03707 ; infill
G1 X81.614 Y139.569 E0.03747 ; infill
G1 X80.904 Y139.569 E0.03707 ; infill
G1 X81.412 Y140.077 E0.03747 ; infill
G1 X80.701 Y140.077 E0.03707 ; infill
G1 X80.194 Y139.569 E0.03747 ; infill
G1 X79.971 Y139.569 E0.01163 ; infill
G1 X79.971 Y140.057 E0.02544 ; infill
G1 X80.192 Y140.278 E0.01631 ; infill
G1 F8640
G1 X79.971 Y140.057 E-0.07217 ; wipe and retract
G1 X79.971 Y139.569 E-0.11255 ; wipe and retract
G1 X80.194 Y139.569 E-0.05143 ; wipe and retract
G1 X80.701 Y140.077 E-0.16576 ; wipe and retract
G1 X81.412 Y140.077 E-0.16399 ; wipe and retract
G1 X80.904 Y139.569 E-0.16576 ; wipe and retract
G1 X81.027 Y139.569 E-0.02834 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X76.978 Y130.258 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X76.672 Y130.284 E0.01263 ; perimeter
G1 X76.413 Y130.067 E0.01396 ; perimeter
G1 X88.166 Y116.060 E0.75325 ; perimeter
M73 Q91 S12
M73 P91 R11
G1 X88.425 Y116.278 E0.01396 ; perimeter
G1 X88.452 Y116.583 E0.01263 ; perimeter
G1 X77.016 Y130.212 E0.73291 ; perimeter
M204 S1000 ; adjust acceleration
G1 X77.176 Y130.638 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.543 Y130.694 E0.02616 ; perimeter
G1 X75.854 Y130.116 E0.03705 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X77.494 Y126.518 E0.04352 ; perimeter
G1 X77.838 Y126.108 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.04352 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X84.515 Y118.151 E0.04352 ; perimeter
G1 X84.859 Y117.741 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.04352 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.806 Y116.080 E0.03705 ; perimeter
G1 X88.861 Y116.712 E0.02616 ; perimeter
G1 X77.214 Y130.592 E0.74644 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.414 Y131.103 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.06014 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X76.936 Y126.567 E0.04352 ; perimeter
G1 X77.789 Y125.550 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.04352 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X83.956 Y118.200 E0.04352 ; perimeter
G1 X84.810 Y117.183 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.04352 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.186 Y115.881 E0.06014 ; perimeter
G1 X89.270 Y116.841 E0.03969 ; perimeter
G1 X77.374 Y131.019 E0.76243 ; perimeter
G1 X76.474 Y131.098 E0.03721 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.282 Y130.725 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.34701 ; wipe and retract
G1 X76.446 Y128.794 E-0.41299 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X99.098 Y114.118 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.166 Y113.705 E0.08141 ; perimeter
G1 X97.166 Y113.106 E0.02465 ; perimeter
G1 X99.098 Y113.522 E0.08142 ; perimeter
G1 X99.098 Y114.058 E0.02210 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.494 Y114.602 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.099 Y114.322 E0.05863 ; perimeter
G1 X96.769 Y114.021 E0.05616 ; perimeter
G1 X96.769 Y112.605 E0.05833 ; perimeter
G1 X97.663 Y112.817 E0.03781 ; perimeter
G1 X99.494 Y113.200 E0.07710 ; perimeter
G1 X99.494 Y114.542 E0.05529 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.124 Y114.450 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.099 Y114.322 E-0.32619 ; wipe and retract
G1 X96.769 Y114.021 E-0.31475 ; wipe and retract
G1 X96.769 Y113.506 E-0.11906 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X89.489 Y114.699 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.15587 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X61.730 Y95.717 E1.06069 ; perimeter
G1 X61.420 Y95.498 E0.01562 ; perimeter
G1 X61.000 Y95.304 E0.01908 ; perimeter
G1 X60.556 Y95.199 E0.01879 ; perimeter
G1 X60.224 Y95.170 E0.01373 ; perimeter
G1 X59.832 Y95.200 E0.01616 ; perimeter
G1 X59.386 Y95.315 E0.01897 ; perimeter
G1 X59.026 Y95.481 E0.01634 ; perimeter
G1 X58.839 Y95.612 E0.00941 ; perimeter
G1 X58.382 Y95.228 E0.02461 ; perimeter
G1 X58.589 Y95.058 E0.01105 ; perimeter
G1 X58.945 Y94.835 E0.01731 ; perimeter
G1 X59.261 Y94.696 E0.01424 ; perimeter
G1 X59.598 Y94.598 E0.01443 ; perimeter
G1 X59.944 Y94.545 E0.01443 ; perimeter
G1 X60.294 Y94.537 E0.01443 ; perimeter
G1 X60.558 Y94.566 E0.01094 ; perimeter
G1 X60.989 Y94.661 E0.01818 ; perimeter
G1 X61.309 Y94.786 E0.01414 ; perimeter
G1 X61.616 Y94.954 E0.01443 ; perimeter
G1 X61.915 Y95.173 E0.01527 ; perimeter
G1 X81.649 Y111.732 E1.06121 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X89.833 Y114.289 E0.16390 ; perimeter
G1 X89.528 Y114.653 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.538 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.16626 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X61.488 Y96.031 E1.06594 ; perimeter
G1 X61.221 Y95.843 E0.01346 ; perimeter
G1 X60.870 Y95.680 E0.01594 ; perimeter
G1 X60.493 Y95.592 E0.01596 ; perimeter
G1 X60.221 Y95.568 E0.01122 ; perimeter
G1 X59.897 Y95.593 E0.01339 ; perimeter
G1 X59.520 Y95.690 E0.01606 ; perimeter
G1 X59.225 Y95.826 E0.01337 ; perimeter
G1 X58.895 Y96.058 E0.01661 ; perimeter
G1 X58.831 Y96.123 E0.00376 ; perimeter
G1 X57.807 Y95.264 E0.05508 ; perimeter
G1 X58.073 Y94.970 E0.01631 ; perimeter
G1 X58.356 Y94.735 E0.01516 ; perimeter
G1 X58.759 Y94.483 E0.01957 ; perimeter
G1 X59.126 Y94.322 E0.01650 ; perimeter
G1 X59.512 Y94.210 E0.01657 ; perimeter
G1 X59.909 Y94.149 E0.01657 ; perimeter
G1 X60.312 Y94.140 E0.01657 ; perimeter
G1 X60.623 Y94.174 E0.01290 ; perimeter
G1 X61.104 Y94.281 E0.02032 ; perimeter
G1 X61.477 Y94.426 E0.01647 ; perimeter
G1 X61.830 Y94.619 E0.01657 ; perimeter
G1 X62.160 Y94.861 E0.01688 ; perimeter
G1 X81.793 Y111.335 E1.05580 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X90.392 Y114.240 E0.18617 ; perimeter
G1 X89.577 Y115.212 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.257 Y114.972 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.024 Y113.134 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X48.761 Y106.864 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.501 Y106.646 E0.01396 ; perimeter
G1 X48.475 Y106.341 E0.01263 ; perimeter
G1 X56.684 Y96.558 E0.52611 ; perimeter
G1 X56.989 Y96.531 E0.01263 ; perimeter
G1 X57.249 Y96.749 E0.01396 ; perimeter
G1 X48.800 Y106.818 E0.54150 ; perimeter
M204 S1000 ; adjust acceleration
G1 X48.810 Y107.422 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.121 Y106.844 E0.03705 ; perimeter
G1 X48.066 Y106.212 E0.02616 ; perimeter
G1 X56.486 Y96.177 E0.53963 ; perimeter
G1 X57.118 Y96.122 E0.02616 ; perimeter
G1 X57.807 Y96.700 E0.03705 ; perimeter
G1 X55.358 Y99.619 E0.15696 ; perimeter
G1 X56.710 Y100.753 E0.07273 ; perimeter
G1 X56.366 Y101.163 E0.02205 ; perimeter
G1 X55.014 Y100.029 E0.07273 ; perimeter
G1 X51.603 Y104.094 E0.21861 ; perimeter
G1 X52.955 Y105.229 E0.07273 ; perimeter
G1 X52.611 Y105.639 E0.02205 ; perimeter
G1 X51.259 Y104.504 E0.07273 ; perimeter
G1 X48.848 Y107.377 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X48.859 Y107.981 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X47.740 Y107.043 E0.06014 ; perimeter
G1 X47.656 Y106.083 E0.03969 ; perimeter
G1 X56.288 Y95.797 E0.55316 ; perimeter
G1 X57.247 Y95.713 E0.03969 ; perimeter
G1 X58.365 Y96.651 E0.06014 ; perimeter
G1 X55.916 Y99.570 E0.15696 ; perimeter
G1 X57.269 Y100.705 E0.07273 ; perimeter
G1 X56.415 Y101.722 E0.05471 ; perimeter
G1 X55.063 Y100.587 E0.07273 ; perimeter
G1 X52.161 Y104.045 E0.18596 ; perimeter
G1 X53.514 Y105.180 E0.07273 ; perimeter
G1 X52.660 Y106.197 E0.05471 ; perimeter
G1 X51.308 Y105.062 E0.07273 ; perimeter
G1 X48.897 Y107.935 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X48.777 Y107.589 F10800.000 ; move inwards before travel
G1 F8640
G1 X47.740 Y107.043 E-0.33736 ; wipe and retract
G1 X47.656 Y106.083 E-0.22244 ; wipe and retract
G1 X48.214 Y105.419 E-0.20020 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X75.277 Y136.926 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X46.877 Y113.095 E1.52727 ; perimeter
G1 X46.606 Y112.836 E0.01545 ; perimeter
G1 X46.384 Y112.557 E0.01468 ; perimeter
G1 X46.200 Y112.250 E0.01475 ; perimeter
G1 X46.058 Y111.920 E0.01480 ; perimeter
G1 X45.962 Y111.573 E0.01484 ; perimeter
G1 X45.913 Y111.215 E0.01487 ; perimeter
G1 X45.913 Y110.853 E0.01489 ; perimeter
G1 X45.962 Y110.495 E0.01490 ; perimeter
G1 X46.062 Y110.136 E0.01534 ; perimeter
G1 X46.147 Y109.916 E0.00974 ; perimeter
G1 X46.320 Y109.596 E0.01498 ; perimeter
G1 X46.544 Y109.290 E0.01561 ; perimeter
G1 X47.438 Y108.225 E0.05727 ; perimeter
G1 X47.848 Y108.569 E0.02205 ; perimeter
G1 X47.087 Y109.476 E0.04877 ; perimeter
G1 X46.862 Y109.796 E0.01612 ; perimeter
G1 X46.685 Y110.176 E0.01725 ; perimeter
G1 X46.577 Y110.580 E0.01725 ; perimeter
G1 X46.541 Y110.997 E0.01725 ; perimeter
G1 X46.577 Y111.414 E0.01725 ; perimeter
G1 X46.685 Y111.819 E0.01725 ; perimeter
G1 X46.862 Y112.198 E0.01725 ; perimeter
G1 X47.102 Y112.541 E0.01725 ; perimeter
G1 X47.379 Y112.818 E0.01612 ; perimeter
G1 X75.621 Y136.516 E1.51877 ; perimeter
G1 X75.316 Y136.880 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.326 Y137.484 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.612 Y113.391 E1.54413 ; perimeter
G1 X46.313 Y113.104 E0.01708 ; perimeter
G1 X46.058 Y112.784 E0.01686 ; perimeter
G1 X45.846 Y112.431 E0.01694 ; perimeter
G1 X45.684 Y112.052 E0.01700 ; perimeter
G1 X45.573 Y111.653 E0.01705 ; perimeter
G1 X45.517 Y111.242 E0.01708 ; perimeter
G1 X45.517 Y110.827 E0.01710 ; perimeter
G1 X45.573 Y110.415 E0.01711 ; perimeter
G1 X45.685 Y110.011 E0.01727 ; perimeter
G1 X45.787 Y109.749 E0.01159 ; perimeter
G1 X45.984 Y109.384 E0.01708 ; perimeter
G1 X46.232 Y109.045 E0.01731 ; perimeter
G1 X47.389 Y107.667 E0.07414 ; perimeter
G1 X48.406 Y108.520 E0.05471 ; perimeter
G1 X47.402 Y109.717 E0.06438 ; perimeter
G1 X47.207 Y109.995 E0.01398 ; perimeter
G1 X47.059 Y110.312 E0.01439 ; perimeter
G1 X46.969 Y110.649 E0.01439 ; perimeter
G1 X46.938 Y110.997 E0.01439 ; perimeter
G1 X46.969 Y111.345 E0.01439 ; perimeter
G1 X47.059 Y111.683 E0.01439 ; perimeter
G1 X47.207 Y111.999 E0.01439 ; perimeter
G1 X47.407 Y112.285 E0.01439 ; perimeter
G1 X47.647 Y112.525 E0.01398 ; perimeter
G1 X76.179 Y136.467 E1.53438 ; perimeter
G1 X75.364 Y137.438 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.022 Y137.223 F10800.000 ; move inwards before travel
G1 F8640
G1 X72.840 Y135.326 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X150.332 Y114.118 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.332 Y113.522 E0.02457 ; perimeter
G1 X152.264 Y113.106 E0.08142 ; perimeter
G1 X152.264 Y113.705 E0.02465 ; perimeter
G1 X150.390 Y114.106 E0.07893 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.935 Y114.602 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.935 Y113.200 E0.05776 ; perimeter
G1 X151.767 Y112.817 E0.07710 ; perimeter
G1 X152.660 Y112.605 E0.03781 ; perimeter
G1 X152.660 Y114.021 E0.05834 ; perimeter
G1 X151.331 Y114.322 E0.05616 ; perimeter
G1 X149.994 Y114.590 E0.05616 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.111 Y114.242 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.935 Y113.200 E-0.32130 ; wipe and retract
G1 X151.767 Y112.817 E-0.43215 ; wipe and retract
G1 X151.795 Y112.810 E-0.00655 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X172.452 Y130.258 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X160.977 Y116.583 E0.73538 ; perimeter
G1 X161.004 Y116.278 E0.01263 ; perimeter
G1 X161.264 Y116.060 E0.01396 ; perimeter
G1 X173.017 Y130.067 E0.75325 ; perimeter
G1 X172.757 Y130.284 E0.01396 ; perimeter
G1 X172.512 Y130.263 E0.01016 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.254 Y130.638 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.568 Y116.712 E0.74891 ; perimeter
G1 X160.624 Y116.080 E0.02616 ; perimeter
G1 X161.313 Y115.502 E0.03705 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X164.571 Y117.741 E0.04352 ; perimeter
G1 X164.915 Y118.151 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.04352 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X171.591 Y126.108 E0.04352 ; perimeter
G1 X171.935 Y126.518 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.04352 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X172.886 Y130.694 E0.03705 ; perimeter
G1 X172.314 Y130.644 E0.02369 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X170.192 Y128.127 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X163.810 Y117.862 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X164.620 Y117.183 E0.04352 ; perimeter
G1 X165.473 Y118.200 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.04352 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X171.640 Y125.550 E0.04352 ; perimeter
G1 X172.494 Y126.567 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.04352 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.015 Y131.103 E0.06014 ; perimeter
G1 X172.056 Y131.019 E0.03969 ; perimeter
G1 X160.159 Y116.841 E0.76243 ; perimeter
G1 X160.243 Y115.881 E0.03969 ; perimeter
G1 X161.361 Y114.943 E0.06014 ; perimeter
G1 X163.772 Y117.816 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X164.103 Y118.135 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.620 Y117.183 E-0.24430 ; wipe and retract
G1 X165.473 Y118.200 E-0.30664 ; wipe and retract
G1 X164.780 Y118.782 E-0.20906 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y139.253 E0.04011 ; perimeter
G1 X169.775 Y139.253 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.04011 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.462 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.857 E0.06321 ; perimeter
G1 X170.171 Y138.857 E0.21040 ; perimeter
G1 X170.171 Y140.391 E0.06321 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.522 Y140.789 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.298 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y138.460 E0.08630 ; perimeter
G1 X170.567 Y138.460 E0.24306 ; perimeter
G1 X170.567 Y140.555 E0.08630 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.358 Y141.185 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.282 Y140.786 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.667 Y140.555 E-0.21581 ; wipe and retract
G1 X164.667 Y138.460 E-0.48370 ; wipe and retract
G1 X164.929 Y138.460 E-0.06049 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X165.997 Y140.278 ; move to first infill point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.59
G1 X165.776 Y140.057 E0.01631 ; infill
G1 X165.776 Y139.569 E0.02544 ; infill
G1 X165.999 Y139.569 E0.01163 ; infill
G1 X166.506 Y140.077 E0.03747 ; infill
G1 X167.217 Y140.077 E0.03707 ; infill
G1 X166.709 Y139.569 E0.03747 ; infill
G1 X167.419 Y139.569 E0.03707 ; infill
G1 X167.927 Y140.077 E0.03747 ; infill
G1 X168.637 Y140.077 E0.03707 ; infill
G1 X168.129 Y139.569 E0.03747 ; infill
G1 X168.840 Y139.569 E0.03707 ; infill
G1 X169.548 Y140.278 E0.05230 ; infill
G1 F8640
G1 X168.840 Y139.569 E-0.23135 ; wipe and retract
G1 X168.129 Y139.569 E-0.16399 ; wipe and retract
G1 X168.637 Y140.077 E-0.16576 ; wipe and retract
G1 X167.927 Y140.077 E-0.16399 ; wipe and retract
G1 X167.820 Y139.970 E-0.03492 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X174.153 Y136.926 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X173.809 Y136.516 E0.02205 ; perimeter
G1 X202.050 Y112.818 E1.51877 ; perimeter
G1 X202.327 Y112.541 E0.01613 ; perimeter
G1 X202.567 Y112.198 E0.01725 ; perimeter
G1 X202.744 Y111.819 E0.01725 ; perimeter
G1 X202.853 Y111.414 E0.01725 ; perimeter
G1 X202.889 Y110.997 E0.01725 ; perimeter
G1 X202.853 Y110.580 E0.01725 ; perimeter
G1 X202.744 Y110.176 E0.01725 ; perimeter
G1 X202.567 Y109.796 E0.01725 ; perimeter
G1 X202.343 Y109.476 E0.01612 ; perimeter
G1 X201.582 Y108.569 E0.04877 ; perimeter
G1 X201.992 Y108.225 E0.02205 ; perimeter
G1 X202.886 Y109.290 E0.05727 ; perimeter
G1 X203.109 Y109.596 E0.01561 ; perimeter
G1 X203.281 Y109.913 E0.01487 ; perimeter
G1 X203.408 Y110.249 E0.01479 ; perimeter
G1 X203.490 Y110.603 E0.01495 ; perimeter
G1 X203.516 Y110.840 E0.00981 ; perimeter
G1 X203.507 Y111.322 E0.01988 ; perimeter
G1 X203.469 Y111.567 E0.01023 ; perimeter
G1 X203.373 Y111.914 E0.01483 ; perimeter
G1 X203.189 Y112.321 E0.01837 ; perimeter
G1 X203.047 Y112.556 E0.01132 ; perimeter
G1 X202.823 Y112.836 E0.01476 ; perimeter
G1 X202.553 Y113.095 E0.01545 ; perimeter
G1 X174.199 Y136.887 E1.52479 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.104 Y137.484 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X173.250 Y136.467 E0.05471 ; perimeter
G1 X201.782 Y112.525 E1.53438 ; perimeter
G1 X202.022 Y112.285 E0.01398 ; perimeter
G1 X202.223 Y111.999 E0.01439 ; perimeter
G1 X202.370 Y111.683 E0.01439 ; perimeter
G1 X202.461 Y111.345 E0.01439 ; perimeter
G1 X202.491 Y110.997 E0.01439 ; perimeter
G1 X202.461 Y110.649 E0.01439 ; perimeter
G1 X202.370 Y110.312 E0.01439 ; perimeter
G1 X202.223 Y109.995 E0.01439 ; perimeter
G1 X202.028 Y109.717 E0.01398 ; perimeter
G1 X201.024 Y108.520 E0.06438 ; perimeter
G1 X202.041 Y107.667 E0.05471 ; perimeter
G1 X203.198 Y109.045 E0.07414 ; perimeter
G1 X203.445 Y109.384 E0.01731 ; perimeter
G1 X203.642 Y109.748 E0.01703 ; perimeter
G1 X203.788 Y110.134 E0.01699 ; perimeter
G1 X203.881 Y110.536 E0.01702 ; perimeter
G1 X203.913 Y110.822 E0.01182 ; perimeter
G1 X203.903 Y111.356 E0.02202 ; perimeter
G1 X203.857 Y111.651 E0.01229 ; perimeter
G1 X203.747 Y112.050 E0.01705 ; perimeter
G1 X203.541 Y112.506 E0.02062 ; perimeter
G1 X203.372 Y112.783 E0.01336 ; perimeter
G1 X203.117 Y113.104 E0.01689 ; perimeter
G1 X202.817 Y113.391 E0.01708 ; perimeter
G1 X174.150 Y137.446 E1.54166 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.034 Y137.090 F10800.000 ; move inwards before travel
G1 F8640
G1 X173.250 Y136.467 E-0.30695 ; wipe and retract
G1 X174.753 Y135.206 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X200.669 Y106.864 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X192.181 Y96.749 E0.54397 ; perimeter
G1 X192.440 Y96.531 E0.01396 ; perimeter
G1 X192.746 Y96.558 E0.01263 ; perimeter
G1 X200.955 Y106.341 E0.52611 ; perimeter
G1 X200.928 Y106.646 E0.01263 ; perimeter
G1 X200.715 Y106.826 E0.01148 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.620 Y107.422 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.171 Y104.504 E0.15696 ; perimeter
G1 X196.818 Y105.639 E0.07273 ; perimeter
G1 X196.474 Y105.229 E0.02205 ; perimeter
G1 X197.827 Y104.094 E0.07273 ; perimeter
G1 X194.416 Y100.029 E0.21861 ; perimeter
G1 X193.063 Y101.163 E0.07273 ; perimeter
G1 X192.719 Y100.753 E0.02205 ; perimeter
G1 X194.072 Y99.619 E0.07273 ; perimeter
G1 X191.623 Y96.700 E0.15696 ; perimeter
G1 X192.311 Y96.122 E0.03705 ; perimeter
G1 X192.944 Y96.177 E0.02616 ; perimeter
G1 X201.364 Y106.212 E0.53963 ; perimeter
G1 X201.309 Y106.844 E0.02616 ; perimeter
G1 X200.666 Y107.384 E0.03457 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.571 Y107.981 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.122 Y105.062 E0.15696 ; perimeter
G1 X196.770 Y106.197 E0.07273 ; perimeter
G1 X195.916 Y105.180 E0.05471 ; perimeter
G1 X197.268 Y104.045 E0.07273 ; perimeter
G1 X194.367 Y100.587 E0.18596 ; perimeter
G1 X193.014 Y101.722 E0.07273 ; perimeter
G1 X192.161 Y100.705 E0.05471 ; perimeter
G1 X193.513 Y99.570 E0.07273 ; perimeter
G1 X191.064 Y96.651 E0.15696 ; perimeter
G1 X192.182 Y95.713 E0.06014 ; perimeter
G1 X193.142 Y95.797 E0.03969 ; perimeter
G1 X201.773 Y106.083 E0.55316 ; perimeter
G1 X201.689 Y107.043 E0.03969 ; perimeter
G1 X200.617 Y107.942 E0.05767 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.462 Y107.596 F10800.000 ; move inwards before travel
G1 F8640
G1 X198.462 Y105.455 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
G1 X159.940 Y114.699 ; move to first perimeter point
G1 Z20.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.596 Y114.289 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.16390 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X187.511 Y95.176 E1.06102 ; perimeter
G1 X187.859 Y94.929 E0.01760 ; perimeter
G1 X188.121 Y94.786 E0.01228 ; perimeter
G1 X188.447 Y94.659 E0.01443 ; perimeter
G1 X188.780 Y94.577 E0.01411 ; perimeter
G1 X189.229 Y94.539 E0.01855 ; perimeter
G1 X189.486 Y94.545 E0.01059 ; perimeter
G1 X189.832 Y94.598 E0.01443 ; perimeter
G1 X190.168 Y94.696 E0.01443 ; perimeter
G1 X190.490 Y94.837 E0.01448 ; perimeter
G1 X190.765 Y95.002 E0.01322 ; perimeter
G1 X191.047 Y95.229 E0.01491 ; perimeter
G1 X190.590 Y95.612 E0.02457 ; perimeter
G1 X190.404 Y95.481 E0.00941 ; perimeter
G1 X190.043 Y95.315 E0.01634 ; perimeter
G1 X189.597 Y95.200 E0.01897 ; perimeter
G1 X189.206 Y95.170 E0.01616 ; perimeter
G1 X188.874 Y95.199 E0.01373 ; perimeter
G1 X188.430 Y95.304 E0.01879 ; perimeter
G1 X188.010 Y95.498 E0.01908 ; perimeter
G1 X187.700 Y95.717 E0.01562 ; perimeter
G1 X167.976 Y112.267 E1.06069 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.986 Y114.661 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.892 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.038 Y114.240 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.18617 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X187.268 Y94.863 E1.05573 ; perimeter
G1 X187.648 Y94.593 E0.01920 ; perimeter
G1 X187.953 Y94.426 E0.01430 ; perimeter
G1 X188.328 Y94.280 E0.01657 ; perimeter
G1 X188.716 Y94.185 E0.01646 ; perimeter
G1 X189.216 Y94.142 E0.02069 ; perimeter
G1 X189.520 Y94.149 E0.01253 ; perimeter
G1 X189.918 Y94.210 E0.01657 ; perimeter
G1 X190.304 Y94.322 E0.01657 ; perimeter
G1 X190.673 Y94.484 E0.01659 ; perimeter
G1 X190.990 Y94.675 E0.01525 ; perimeter
G1 X191.277 Y94.899 E0.01502 ; perimeter
G1 X191.626 Y95.260 E0.02070 ; perimeter
G1 X190.598 Y96.123 E0.05527 ; perimeter
G1 X190.534 Y96.058 E0.00376 ; perimeter
G1 X190.205 Y95.826 E0.01661 ; perimeter
G1 X189.910 Y95.690 E0.01337 ; perimeter
G1 X189.532 Y95.593 E0.01606 ; perimeter
G1 X189.208 Y95.568 E0.01339 ; perimeter
G1 X188.937 Y95.592 E0.01122 ; perimeter
G1 X188.560 Y95.680 E0.01596 ; perimeter
G1 X188.209 Y95.843 E0.01594 ; perimeter
G1 X187.942 Y96.031 E0.01346 ; perimeter
G1 X168.120 Y112.663 E1.06594 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X159.938 Y115.219 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.874 Y114.858 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;21


G1 F8640
G1 X159.038 Y114.240 E-0.30695 ; wipe and retract
G1 X160.541 Y112.979 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;21
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y101.107 E0.04011 ; perimeter
G1 X84.255 Y101.107 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.04011 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.253 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.711 E0.06321 ; perimeter
G1 X84.651 Y100.711 E0.21040 ; perimeter
G1 X84.651 Y102.245 E0.06321 ; perimeter
G1 X84.296 Y102.600 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.417 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y100.314 E0.08630 ; perimeter
G1 X85.047 Y100.314 E0.24305 ; perimeter
G1 X85.047 Y102.409 E0.08630 ; perimeter
G1 X84.460 Y102.997 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.087 Y102.814 F10800.000 ; move inwards before travel
G1 F8640
G1 X81.168 Y103.027 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X83.718 Y102.131 ; move to first infill point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.6
G1 X83.939 Y101.910 E0.01632 ; infill
G1 X83.939 Y101.423 E0.02544 ; infill
G1 X83.716 Y101.423 E0.01163 ; infill
G1 X83.208 Y101.931 E0.03747 ; infill
G1 X82.498 Y101.931 E0.03707 ; infill
G1 X83.006 Y101.423 E0.03747 ; infill
G1 X82.295 Y101.423 E0.03707 ; infill
G1 X81.788 Y101.931 E0.03747 ; infill
G1 X81.078 Y101.931 E0.03707 ; infill
G1 X81.585 Y101.423 E0.03747 ; infill
G1 X80.875 Y101.423 E0.03707 ; infill
G1 X80.167 Y102.131 E0.05230 ; infill
G1 F8640
G1 X80.875 Y101.423 E-0.23135 ; wipe and retract
G1 X81.585 Y101.423 E-0.16399 ; wipe and retract
G1 X81.078 Y101.931 E-0.16576 ; wipe and retract
G1 X81.788 Y101.931 E-0.16399 ; wipe and retract
G1 X81.895 Y101.824 E-0.03492 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X77.549 Y92.087 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X76.957 Y92.138 E0.02446 ; perimeter
G1 X76.698 Y91.921 E0.01396 ; perimeter
G1 X88.451 Y77.914 E0.75325 ; perimeter
G1 X88.711 Y78.132 E0.01396 ; perimeter
G1 X88.762 Y78.723 E0.02446 ; perimeter
G1 X77.588 Y92.041 E0.71618 ; perimeter
M204 S1000 ; adjust acceleration
G1 X77.747 Y92.467 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.828 Y92.547 E0.03799 ; perimeter
G1 X76.140 Y91.969 E0.03705 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X77.842 Y88.424 E0.04017 ; perimeter
G1 X78.186 Y88.014 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.04017 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X84.862 Y80.057 E0.04017 ; perimeter
G1 X85.206 Y79.647 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.04017 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X89.091 Y77.933 E0.03705 ; perimeter
G1 X89.172 Y78.852 E0.03799 ; perimeter
G1 X77.786 Y92.421 E0.72971 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X76.828 Y92.547 E-0.22293 ; wipe and retract
G1 X76.140 Y91.969 E-0.20765 ; wipe and retract
G1 X77.057 Y90.877 E-0.32943 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X76.699 Y92.957 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.581 Y92.018 E0.06014 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X77.283 Y88.473 E0.04017 ; perimeter
G1 X78.137 Y87.456 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.04017 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X84.304 Y80.106 E0.04017 ; perimeter
G1 X85.157 Y79.089 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.04017 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.472 Y77.735 E0.06014 ; perimeter
G1 X89.581 Y78.981 E0.05151 ; perimeter
G1 X77.945 Y92.848 E0.74571 ; perimeter
G1 X76.759 Y92.951 E0.04904 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.569 Y92.579 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.581 Y92.018 E-0.34701 ; wipe and retract
G1 X76.731 Y90.648 E-0.41299 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X99.336 Y75.816 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.498 Y75.421 E0.07746 ; perimeter
G1 X97.498 Y75.020 E0.01653 ; perimeter
G1 X99.336 Y75.414 E0.07745 ; perimeter
G1 X99.336 Y75.756 E0.01409 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.733 Y76.300 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.476 Y76.048 E0.05280 ; perimeter
G1 X97.102 Y75.738 E0.05804 ; perimeter
G1 X97.102 Y74.519 E0.05022 ; perimeter
G1 X97.936 Y74.716 E0.03532 ; perimeter
G1 X99.733 Y75.092 E0.07562 ; perimeter
G1 X99.733 Y76.240 E0.04727 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.360 Y76.154 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.476 Y76.048 E-0.29356 ; wipe and retract
G1 X97.102 Y75.738 E-0.32529 ; wipe and retract
G1 X97.102 Y75.126 E-0.14114 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X89.774 Y76.553 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.15587 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X62.015 Y57.571 E1.06068 ; perimeter
G1 X61.709 Y57.354 E0.01545 ; perimeter
G1 X61.277 Y57.155 E0.01962 ; perimeter
G1 X60.823 Y57.052 E0.01919 ; perimeter
G1 X60.513 Y57.024 E0.01282 ; perimeter
G1 X60.127 Y57.053 E0.01592 ; perimeter
G1 X59.671 Y57.168 E0.01937 ; perimeter
G1 X59.315 Y57.332 E0.01615 ; perimeter
G1 X59.125 Y57.467 E0.00959 ; perimeter
G1 X58.667 Y57.082 E0.02463 ; perimeter
G1 X58.864 Y56.919 E0.01056 ; perimeter
G1 X59.231 Y56.688 E0.01783 ; perimeter
G1 X59.547 Y56.549 E0.01421 ; perimeter
G1 X59.883 Y56.452 E0.01443 ; perimeter
G1 X60.229 Y56.398 E0.01443 ; perimeter
G1 X60.580 Y56.391 E0.01443 ; perimeter
G1 X60.819 Y56.417 E0.00993 ; perimeter
G1 X61.276 Y56.516 E0.01925 ; perimeter
G1 X61.594 Y56.639 E0.01407 ; perimeter
G1 X61.901 Y56.808 E0.01443 ; perimeter
G1 X62.200 Y57.027 E0.01527 ; perimeter
G1 X81.934 Y73.586 E1.06121 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.118 Y76.143 E0.16390 ; perimeter
G1 X89.813 Y76.507 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.823 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.16626 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X61.773 Y57.885 E1.06594 ; perimeter
G1 X61.510 Y57.699 E0.01328 ; perimeter
G1 X61.148 Y57.532 E0.01641 ; perimeter
G1 X60.761 Y57.444 E0.01636 ; perimeter
G1 X60.510 Y57.422 E0.01039 ; perimeter
G1 X60.191 Y57.446 E0.01317 ; perimeter
G1 X59.804 Y57.544 E0.01644 ; perimeter
G1 X59.514 Y57.677 E0.01315 ; perimeter
G1 X59.176 Y57.916 E0.01707 ; perimeter
G1 X59.116 Y57.977 E0.00349 ; perimeter
G1 X58.092 Y57.117 E0.05507 ; perimeter
G1 X58.353 Y56.828 E0.01603 ; perimeter
G1 X58.631 Y56.597 E0.01491 ; perimeter
G1 X59.045 Y56.337 E0.02012 ; perimeter
G1 X59.411 Y56.176 E0.01649 ; perimeter
G1 X59.797 Y56.064 E0.01657 ; perimeter
G1 X60.195 Y56.003 E0.01657 ; perimeter
G1 X60.597 Y55.994 E0.01657 ; perimeter
G1 X60.883 Y56.025 E0.01184 ; perimeter
G1 X61.390 Y56.135 E0.02139 ; perimeter
G1 X61.762 Y56.280 E0.01644 ; perimeter
G1 X62.115 Y56.473 E0.01657 ; perimeter
G1 X62.445 Y56.715 E0.01688 ; perimeter
G1 X82.078 Y73.189 E1.05580 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X90.677 Y76.094 E0.18617 ; perimeter
G1 X89.862 Y77.065 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.543 Y76.826 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.309 Y74.987 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X49.046 Y68.718 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.787 Y68.500 E0.01396 ; perimeter
G1 X48.735 Y67.909 E0.02446 ; perimeter
G1 X56.683 Y58.437 E0.50938 ; perimeter
G1 X57.274 Y58.385 E0.02446 ; perimeter
G1 X57.534 Y58.603 E0.01396 ; perimeter
G1 X49.085 Y68.672 E0.54150 ; perimeter
M204 S1000 ; adjust acceleration
G1 X49.095 Y69.276 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.406 Y68.698 E0.03705 ; perimeter
G1 X48.326 Y67.780 E0.03799 ; perimeter
G1 X56.485 Y58.056 E0.52291 ; perimeter
G1 X57.403 Y57.976 E0.03799 ; perimeter
G1 X58.092 Y58.554 E0.03705 ; perimeter
G1 X55.643 Y61.472 E0.15696 ; perimeter
G1 X56.720 Y62.376 E0.05790 ; perimeter
G1 X56.376 Y62.786 E0.02205 ; perimeter
G1 X55.299 Y61.882 E0.05790 ; perimeter
G1 X51.888 Y65.948 E0.21861 ; perimeter
G1 X52.965 Y66.851 E0.05790 ; perimeter
G1 X52.621 Y67.261 E0.02205 ; perimeter
G1 X51.544 Y66.358 E0.05790 ; perimeter
G1 X49.134 Y69.230 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X49.144 Y69.835 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.026 Y68.896 E0.06014 ; perimeter
G1 X47.917 Y67.651 E0.05151 ; perimeter
G1 X56.287 Y57.676 E0.53643 ; perimeter
G1 X57.532 Y57.567 E0.05151 ; perimeter
G1 X58.651 Y58.505 E0.06014 ; perimeter
G1 X56.202 Y61.424 E0.15696 ; perimeter
G1 X57.278 Y62.327 E0.05790 ; perimeter
G1 X56.425 Y63.344 E0.05471 ; perimeter
G1 X55.348 Y62.441 E0.05790 ; perimeter
G1 X52.446 Y65.899 E0.18596 ; perimeter
G1 X53.523 Y66.802 E0.05790 ; perimeter
G1 X52.669 Y67.819 E0.05471 ; perimeter
G1 X51.593 Y66.916 E0.05790 ; perimeter
G1 X49.182 Y69.789 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X49.052 Y69.445 F10800.000 ; move inwards before travel
G1 F8640
G1 X48.026 Y68.896 E-0.33736 ; wipe and retract
G1 X47.917 Y67.651 E-0.28873 ; wipe and retract
G1 X48.289 Y67.206 E-0.13391 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X75.371 Y98.619 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.162 Y74.949 E1.51696 ; perimeter
G1 X46.890 Y74.688 E0.01554 ; perimeter
G1 X46.667 Y74.408 E0.01476 ; perimeter
G1 X46.483 Y74.099 E0.01482 ; perimeter
G1 X46.341 Y73.766 E0.01487 ; perimeter
G1 X46.246 Y73.417 E0.01491 ; perimeter
G1 X46.198 Y73.058 E0.01494 ; perimeter
G1 X46.199 Y72.695 E0.01495 ; perimeter
G1 X46.250 Y72.335 E0.01496 ; perimeter
G1 X46.353 Y71.974 E0.01549 ; perimeter
G1 X46.431 Y71.773 E0.00886 ; perimeter
G1 X46.605 Y71.451 E0.01507 ; perimeter
G1 X46.829 Y71.144 E0.01569 ; perimeter
G1 X47.723 Y70.079 E0.05727 ; perimeter
G1 X48.133 Y70.423 E0.02205 ; perimeter
G1 X47.372 Y71.330 E0.04877 ; perimeter
G1 X47.148 Y71.650 E0.01612 ; perimeter
G1 X46.971 Y72.030 E0.01725 ; perimeter
G1 X46.862 Y72.434 E0.01725 ; perimeter
G1 X46.826 Y72.851 E0.01725 ; perimeter
G1 X46.862 Y73.268 E0.01725 ; perimeter
G1 X46.971 Y73.673 E0.01725 ; perimeter
G1 X47.148 Y74.052 E0.01725 ; perimeter
G1 X47.388 Y74.395 E0.01725 ; perimeter
G1 X47.664 Y74.672 E0.01612 ; perimeter
G1 X75.715 Y98.209 E1.50847 ; perimeter
G1 X75.409 Y98.573 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.419 Y99.177 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.898 Y75.244 E1.53383 ; perimeter
G1 X46.597 Y74.956 E0.01718 ; perimeter
G1 X46.340 Y74.634 E0.01696 ; perimeter
G1 X46.129 Y74.279 E0.01703 ; perimeter
G1 X45.966 Y73.897 E0.01708 ; perimeter
G1 X45.856 Y73.496 E0.01713 ; perimeter
G1 X45.801 Y73.083 E0.01716 ; perimeter
G1 X45.803 Y72.666 E0.01718 ; perimeter
G1 X45.862 Y72.253 E0.01718 ; perimeter
G1 X45.977 Y71.848 E0.01737 ; perimeter
G1 X46.070 Y71.607 E0.01065 ; perimeter
G1 X46.268 Y71.240 E0.01716 ; perimeter
G1 X46.517 Y70.899 E0.01739 ; perimeter
G1 X47.674 Y69.520 E0.07414 ; perimeter
G1 X48.691 Y70.374 E0.05471 ; perimeter
G1 X47.687 Y71.571 E0.06438 ; perimeter
G1 X47.492 Y71.849 E0.01398 ; perimeter
G1 X47.344 Y72.166 E0.01439 ; perimeter
G1 X47.254 Y72.503 E0.01439 ; perimeter
G1 X47.224 Y72.851 E0.01439 ; perimeter
G1 X47.254 Y73.199 E0.01439 ; perimeter
G1 X47.344 Y73.537 E0.01439 ; perimeter
G1 X47.492 Y73.853 E0.01439 ; perimeter
G1 X47.692 Y74.139 E0.01439 ; perimeter
G1 X47.932 Y74.379 E0.01398 ; perimeter
G1 X76.273 Y98.160 E1.52408 ; perimeter
G1 X75.458 Y99.131 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.116 Y98.916 F10800.000 ; move inwards before travel
G1 F8640
G1 X72.933 Y97.020 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X150.664 Y75.816 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q92 S11
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.664 Y75.414 E0.01656 ; perimeter
G1 X152.502 Y75.020 E0.07745 ; perimeter
G1 X152.502 Y75.421 E0.01653 ; perimeter
G1 X150.723 Y75.804 E0.07499 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.267 Y76.300 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.267 Y75.092 E0.04975 ; perimeter
G1 X152.064 Y74.716 E0.07562 ; perimeter
G1 X152.898 Y74.518 E0.03532 ; perimeter
G1 X152.898 Y75.738 E0.05023 ; perimeter
G1 X151.524 Y76.048 E0.05804 ; perimeter
G1 X150.326 Y76.288 E0.05033 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.443 Y75.940 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.267 Y75.092 E-0.27644 ; wipe and retract
G1 X152.064 Y74.716 E-0.42385 ; wipe and retract
G1 X152.316 Y74.656 E-0.05971 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X172.451 Y92.087 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 P92 R10
M204 S800 ; adjust acceleration
G1 F2400
G1 X161.238 Y78.723 E0.71866 ; perimeter
G1 X161.289 Y78.132 E0.02446 ; perimeter
G1 X161.549 Y77.914 E0.01396 ; perimeter
G1 X173.302 Y91.921 E0.75325 ; perimeter
G1 X173.043 Y92.138 E0.01396 ; perimeter
G1 X172.511 Y92.092 E0.02199 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.253 Y92.467 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.829 Y78.852 E0.73218 ; perimeter
G1 X160.909 Y77.933 E0.03799 ; perimeter
G1 X161.598 Y77.355 E0.03705 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X164.794 Y79.647 E0.04017 ; perimeter
G1 X165.138 Y80.057 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.04017 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X171.814 Y88.014 E0.04017 ; perimeter
G1 X172.158 Y88.424 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.04017 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.172 Y92.547 E0.03705 ; perimeter
G1 X172.313 Y92.472 E0.03551 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X170.191 Y89.956 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X164.096 Y79.716 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X164.843 Y79.089 E0.04017 ; perimeter
G1 X165.696 Y80.106 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.04017 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X171.863 Y87.456 E0.04017 ; perimeter
G1 X172.717 Y88.473 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.04017 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.301 Y92.957 E0.06014 ; perimeter
G1 X172.055 Y92.848 E0.05151 ; perimeter
G1 X160.419 Y78.981 E0.74571 ; perimeter
G1 X160.528 Y77.735 E0.05151 ; perimeter
G1 X161.647 Y76.797 E0.06014 ; perimeter
G1 X164.057 Y79.670 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X164.388 Y79.988 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.843 Y79.089 E-0.22558 ; wipe and retract
G1 X165.696 Y80.106 E-0.30664 ; wipe and retract
G1 X164.949 Y80.733 E-0.22515 ; wipe and retract
G1 X164.957 Y80.742 E-0.00264 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y101.107 E0.04011 ; perimeter
G1 X170.060 Y101.107 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.04011 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.747 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.711 E0.06321 ; perimeter
G1 X170.456 Y100.711 E0.21040 ; perimeter
G1 X170.456 Y102.245 E0.06321 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.807 Y102.643 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.583 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y100.314 E0.08630 ; perimeter
G1 X170.853 Y100.314 E0.24306 ; perimeter
G1 X170.853 Y102.409 E0.08630 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.643 Y103.039 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.567 Y102.640 F10800.000 ; move inwards before travel
G1 X165.972 Y102.131 ; move to first infill point
G1 F7168.59
G1 X166.680 Y101.423 E0.05230 ; infill
G1 X167.390 Y101.423 E0.03707 ; infill
G1 X166.883 Y101.931 E0.03747 ; infill
G1 X167.593 Y101.931 E0.03707 ; infill
G1 X168.101 Y101.423 E0.03747 ; infill
G1 X168.811 Y101.423 E0.03707 ; infill
G1 X168.303 Y101.931 E0.03747 ; infill
G1 X169.013 Y101.931 E0.03707 ; infill
G1 X169.521 Y101.423 E0.03747 ; infill
G1 X169.744 Y101.423 E0.01163 ; infill
G1 X169.744 Y101.910 E0.02544 ; infill
G1 X169.523 Y102.131 E0.01633 ; infill
G1 F8640
G1 X169.744 Y101.910 E-0.07222 ; wipe and retract
G1 X169.744 Y101.423 E-0.11252 ; wipe and retract
G1 X169.521 Y101.423 E-0.05147 ; wipe and retract
G1 X169.013 Y101.931 E-0.16576 ; wipe and retract
G1 X168.303 Y101.931 E-0.16399 ; wipe and retract
G1 X168.811 Y101.423 E-0.16576 ; wipe and retract
G1 X168.688 Y101.423 E-0.02829 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X174.629 Y98.619 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X174.285 Y98.209 E0.02205 ; perimeter
G1 X202.336 Y74.672 E1.50847 ; perimeter
G1 X202.612 Y74.395 E0.01613 ; perimeter
G1 X202.852 Y74.052 E0.01725 ; perimeter
G1 X203.029 Y73.673 E0.01725 ; perimeter
G1 X203.138 Y73.268 E0.01725 ; perimeter
G1 X203.174 Y72.851 E0.01725 ; perimeter
G1 X203.138 Y72.434 E0.01725 ; perimeter
G1 X203.029 Y72.030 E0.01725 ; perimeter
G1 X202.852 Y71.650 E0.01725 ; perimeter
G1 X202.628 Y71.330 E0.01612 ; perimeter
G1 X201.867 Y70.423 E0.04877 ; perimeter
G1 X202.277 Y70.079 E0.02205 ; perimeter
G1 X203.170 Y71.143 E0.05725 ; perimeter
G1 X203.396 Y71.452 E0.01576 ; perimeter
G1 X203.569 Y71.773 E0.01502 ; perimeter
G1 X203.654 Y71.992 E0.00969 ; perimeter
G1 X203.775 Y72.459 E0.01985 ; perimeter
G1 X203.808 Y72.817 E0.01479 ; perimeter
G1 X203.792 Y73.182 E0.01505 ; perimeter
G1 X203.756 Y73.411 E0.00956 ; perimeter
G1 X203.661 Y73.759 E0.01488 ; perimeter
G1 X203.464 Y74.193 E0.01962 ; perimeter
G1 X203.335 Y74.406 E0.01026 ; perimeter
G1 X203.110 Y74.688 E0.01487 ; perimeter
G1 X202.838 Y74.949 E0.01555 ; perimeter
G1 X174.675 Y98.580 E1.51449 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.581 Y99.177 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X173.727 Y98.160 E0.05471 ; perimeter
G1 X202.068 Y74.379 E1.52408 ; perimeter
G1 X202.308 Y74.139 E0.01398 ; perimeter
G1 X202.508 Y73.853 E0.01439 ; perimeter
G1 X202.656 Y73.537 E0.01439 ; perimeter
G1 X202.746 Y73.199 E0.01439 ; perimeter
G1 X202.776 Y72.851 E0.01439 ; perimeter
G1 X202.746 Y72.503 E0.01439 ; perimeter
G1 X202.656 Y72.166 E0.01439 ; perimeter
G1 X202.508 Y71.849 E0.01439 ; perimeter
G1 X202.313 Y71.571 E0.01398 ; perimeter
G1 X201.309 Y70.374 E0.06438 ; perimeter
G1 X202.326 Y69.520 E0.05471 ; perimeter
G1 X203.483 Y70.899 E0.07413 ; perimeter
G1 X203.732 Y71.240 E0.01742 ; perimeter
G1 X203.930 Y71.607 E0.01715 ; perimeter
G1 X204.026 Y71.854 E0.01095 ; perimeter
G1 X204.167 Y72.397 E0.02308 ; perimeter
G1 X204.205 Y72.807 E0.01699 ; perimeter
G1 X204.187 Y73.221 E0.01704 ; perimeter
G1 X204.144 Y73.494 E0.01139 ; perimeter
G1 X204.035 Y73.894 E0.01712 ; perimeter
G1 X203.815 Y74.378 E0.02190 ; perimeter
G1 X203.660 Y74.633 E0.01226 ; perimeter
G1 X203.403 Y74.956 E0.01699 ; perimeter
G1 X203.102 Y75.244 E0.01718 ; perimeter
G1 X174.626 Y99.139 E1.53136 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.511 Y98.783 F10800.000 ; move inwards before travel
G1 F8640
G1 X173.727 Y98.160 E-0.30695 ; wipe and retract
G1 X175.230 Y96.899 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X200.954 Y68.718 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X192.466 Y58.603 E0.54397 ; perimeter
G1 X192.726 Y58.385 E0.01396 ; perimeter
G1 X193.317 Y58.437 E0.02446 ; perimeter
G1 X201.265 Y67.909 E0.50938 ; perimeter
G1 X201.213 Y68.500 E0.02446 ; perimeter
G1 X201.000 Y68.679 E0.01148 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.905 Y69.276 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.456 Y66.358 E0.15696 ; perimeter
G1 X197.379 Y67.261 E0.05790 ; perimeter
G1 X197.035 Y66.851 E0.02205 ; perimeter
G1 X198.112 Y65.948 E0.05790 ; perimeter
G1 X194.701 Y61.882 E0.21861 ; perimeter
G1 X193.624 Y62.786 E0.05790 ; perimeter
G1 X193.280 Y62.376 E0.02205 ; perimeter
G1 X194.357 Y61.472 E0.05790 ; perimeter
G1 X191.908 Y58.554 E0.15696 ; perimeter
G1 X192.597 Y57.976 E0.03705 ; perimeter
G1 X193.515 Y58.056 E0.03799 ; perimeter
G1 X201.674 Y67.780 E0.52291 ; perimeter
G1 X201.594 Y68.698 E0.03799 ; perimeter
G1 X200.951 Y69.238 E0.03457 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.856 Y69.835 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.407 Y66.916 E0.15696 ; perimeter
G1 X197.331 Y67.819 E0.05790 ; perimeter
G1 X196.477 Y66.802 E0.05471 ; perimeter
G1 X197.554 Y65.899 E0.05790 ; perimeter
G1 X194.652 Y62.441 E0.18596 ; perimeter
G1 X193.575 Y63.344 E0.05790 ; perimeter
G1 X192.722 Y62.327 E0.05471 ; perimeter
G1 X193.798 Y61.424 E0.05790 ; perimeter
G1 X191.349 Y58.505 E0.15696 ; perimeter
G1 X192.468 Y57.567 E0.06014 ; perimeter
G1 X193.713 Y57.676 E0.05151 ; perimeter
G1 X202.083 Y67.651 E0.53643 ; perimeter
G1 X201.974 Y68.896 E0.05151 ; perimeter
G1 X200.902 Y69.796 E0.05767 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.740 Y69.452 F10800.000 ; move inwards before travel
G1 F8640
G1 X198.747 Y67.308 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X160.226 Y76.553 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.882 Y76.143 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.16390 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X187.795 Y57.032 E1.06093 ; perimeter
G1 X188.168 Y56.770 E0.01878 ; perimeter
G1 X188.406 Y56.639 E0.01118 ; perimeter
G1 X188.732 Y56.512 E0.01443 ; perimeter
G1 X189.072 Y56.429 E0.01443 ; perimeter
G1 X189.421 Y56.391 E0.01444 ; perimeter
G1 X189.771 Y56.398 E0.01441 ; perimeter
G1 X190.117 Y56.452 E0.01443 ; perimeter
G1 X190.453 Y56.549 E0.01443 ; perimeter
G1 X190.775 Y56.691 E0.01449 ; perimeter
G1 X191.046 Y56.853 E0.01300 ; perimeter
G1 X191.332 Y57.083 E0.01513 ; perimeter
G1 X190.875 Y57.467 E0.02457 ; perimeter
G1 X190.685 Y57.332 E0.00959 ; perimeter
G1 X190.329 Y57.168 E0.01615 ; perimeter
G1 X189.873 Y57.053 E0.01937 ; perimeter
G1 X189.487 Y57.024 E0.01592 ; perimeter
G1 X189.177 Y57.052 E0.01282 ; perimeter
G1 X188.723 Y57.155 E0.01919 ; perimeter
G1 X188.291 Y57.354 E0.01962 ; perimeter
G1 X187.985 Y57.571 E0.01545 ; perimeter
G1 X168.261 Y74.121 E1.06068 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X160.272 Y76.514 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.177 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.323 Y76.094 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.18617 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X187.553 Y56.717 E1.05570 ; perimeter
G1 X187.958 Y56.433 E0.02038 ; perimeter
G1 X188.238 Y56.280 E0.01314 ; perimeter
G1 X188.613 Y56.134 E0.01657 ; perimeter
G1 X189.003 Y56.038 E0.01657 ; perimeter
G1 X189.515 Y55.996 E0.02113 ; perimeter
G1 X189.805 Y56.003 E0.01197 ; perimeter
G1 X190.203 Y56.064 E0.01657 ; perimeter
G1 X190.589 Y56.176 E0.01657 ; perimeter
G1 X190.957 Y56.338 E0.01659 ; perimeter
G1 X191.270 Y56.525 E0.01501 ; perimeter
G1 X191.553 Y56.745 E0.01474 ; perimeter
G1 X191.911 Y57.115 E0.02122 ; perimeter
G1 X190.884 Y57.977 E0.05524 ; perimeter
G1 X190.824 Y57.916 E0.00349 ; perimeter
G1 X190.486 Y57.677 E0.01707 ; perimeter
G1 X190.196 Y57.544 E0.01315 ; perimeter
G1 X189.809 Y57.446 E0.01644 ; perimeter
G1 X189.490 Y57.422 E0.01317 ; perimeter
G1 X189.239 Y57.444 E0.01039 ; perimeter
G1 X188.852 Y57.532 E0.01636 ; perimeter
G1 X188.490 Y57.699 E0.01641 ; perimeter
G1 X188.227 Y57.885 E0.01328 ; perimeter
G1 X168.405 Y74.517 E1.06594 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X160.223 Y77.073 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.159 Y76.712 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.323 Y76.094 E-0.30695 ; wipe and retract
G1 X160.826 Y74.833 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y139.253 E0.04011 ; perimeter
G1 X83.970 Y139.253 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.04011 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.968 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.857 E0.06321 ; perimeter
G1 X84.366 Y138.857 E0.21040 ; perimeter
G1 X84.366 Y140.391 E0.06321 ; perimeter
G1 X84.010 Y140.747 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.132 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y138.460 E0.08630 ; perimeter
G1 X84.762 Y138.460 E0.24305 ; perimeter
G1 X84.762 Y140.555 E0.08630 ; perimeter
G1 X84.175 Y141.143 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.802 Y140.960 F10800.000 ; move inwards before travel
G1 F8640
G1 X80.883 Y141.173 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X83.432 Y140.278 ; move to first infill point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.6
G1 X83.654 Y140.056 E0.01632 ; infill
G1 X83.654 Y139.569 E0.02544 ; infill
G1 X83.431 Y139.569 E0.01163 ; infill
G1 X82.923 Y140.077 E0.03747 ; infill
G1 X82.213 Y140.077 E0.03707 ; infill
G1 X82.720 Y139.569 E0.03747 ; infill
G1 X82.010 Y139.569 E0.03707 ; infill
G1 X81.503 Y140.077 E0.03747 ; infill
G1 X80.792 Y140.077 E0.03707 ; infill
G1 X81.300 Y139.569 E0.03747 ; infill
G1 X80.590 Y139.569 E0.03707 ; infill
G1 X79.881 Y140.278 E0.05230 ; infill
G1 F8640
G1 X80.590 Y139.569 E-0.23135 ; wipe and retract
G1 X81.300 Y139.569 E-0.16399 ; wipe and retract
G1 X80.792 Y140.077 E-0.16576 ; wipe and retract
G1 X81.503 Y140.077 E-0.16399 ; wipe and retract
G1 X81.610 Y139.970 E-0.03492 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X77.264 Y130.233 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X76.672 Y130.284 E0.02446 ; perimeter
G1 X76.413 Y130.067 E0.01396 ; perimeter
G1 X88.166 Y116.060 E0.75325 ; perimeter
G1 X88.425 Y116.278 E0.01396 ; perimeter
G1 X88.477 Y116.869 E0.02446 ; perimeter
G1 X77.302 Y130.187 E0.71618 ; perimeter
M204 S1000 ; adjust acceleration
G1 X77.462 Y130.613 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.543 Y130.694 E0.03799 ; perimeter
G1 X75.854 Y130.116 E0.03705 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X77.556 Y126.570 E0.04017 ; perimeter
G1 X77.901 Y126.160 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.04017 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X84.577 Y118.203 E0.04017 ; perimeter
G1 X84.921 Y117.793 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.04017 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.806 Y116.080 E0.03705 ; perimeter
G1 X88.886 Y116.998 E0.03799 ; perimeter
G1 X77.500 Y130.567 E0.72971 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X76.543 Y130.694 E-0.22293 ; wipe and retract
G1 X75.854 Y130.116 E-0.20765 ; wipe and retract
G1 X76.771 Y129.023 E-0.32943 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X76.414 Y131.103 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X75.296 Y130.164 E0.06014 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X76.998 Y126.619 E0.04017 ; perimeter
G1 X77.852 Y125.602 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.04017 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X84.019 Y118.252 E0.04017 ; perimeter
G1 X84.872 Y117.235 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.04017 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.186 Y115.881 E0.06014 ; perimeter
G1 X89.295 Y117.127 E0.05151 ; perimeter
G1 X77.660 Y130.994 E0.74571 ; perimeter
G1 X76.474 Y131.098 E0.04904 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.283 Y130.725 F10800.000 ; move inwards before travel
G1 F8640
G1 X75.296 Y130.164 E-0.34701 ; wipe and retract
G1 X76.446 Y128.794 E-0.41299 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X99.051 Y113.962 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.213 Y113.567 E0.07746 ; perimeter
G1 X97.213 Y113.166 E0.01653 ; perimeter
G1 X99.051 Y113.560 E0.07745 ; perimeter
G1 X99.051 Y113.902 E0.01409 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.447 Y114.446 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.191 Y114.194 E0.05280 ; perimeter
G1 X96.816 Y113.884 E0.05804 ; perimeter
G1 X96.816 Y112.665 E0.05022 ; perimeter
G1 X97.651 Y112.862 E0.03532 ; perimeter
G1 X99.447 Y113.238 E0.07562 ; perimeter
G1 X99.447 Y114.386 E0.04727 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.075 Y114.300 F10800.000 ; move inwards before travel
G1 F8640
G1 X98.191 Y114.194 E-0.29356 ; wipe and retract
G1 X96.816 Y113.884 E-0.32529 ; wipe and retract
G1 X96.816 Y113.273 E-0.14114 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X89.489 Y114.699 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.15587 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X61.730 Y95.717 E1.06068 ; perimeter
G1 X61.424 Y95.501 E0.01545 ; perimeter
G1 X60.992 Y95.301 E0.01962 ; perimeter
G1 X60.537 Y95.198 E0.01919 ; perimeter
G1 X60.227 Y95.170 E0.01282 ; perimeter
G1 X59.842 Y95.199 E0.01592 ; perimeter
G1 X59.386 Y95.315 E0.01937 ; perimeter
G1 X59.030 Y95.479 E0.01615 ; perimeter
G1 X58.840 Y95.613 E0.00959 ; perimeter
G1 X58.382 Y95.229 E0.02463 ; perimeter
G1 X58.579 Y95.065 E0.01056 ; perimeter
G1 X58.946 Y94.834 E0.01783 ; perimeter
G1 X59.262 Y94.695 E0.01421 ; perimeter
G1 X59.598 Y94.598 E0.01443 ; perimeter
G1 X59.944 Y94.545 E0.01443 ; perimeter
G1 X60.294 Y94.537 E0.01443 ; perimeter
G1 X60.534 Y94.563 E0.00993 ; perimeter
G1 X60.991 Y94.662 E0.01925 ; perimeter
G1 X61.309 Y94.786 E0.01407 ; perimeter
G1 X61.616 Y94.954 E0.01443 ; perimeter
G1 X61.915 Y95.173 E0.01527 ; perimeter
G1 X81.649 Y111.732 E1.06121 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X89.833 Y114.289 E0.16390 ; perimeter
G1 X89.528 Y114.653 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.538 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.16626 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X61.488 Y96.031 E1.06594 ; perimeter
G1 X61.225 Y95.845 E0.01328 ; perimeter
G1 X60.863 Y95.678 E0.01641 ; perimeter
G1 X60.476 Y95.590 E0.01636 ; perimeter
G1 X60.225 Y95.568 E0.01039 ; perimeter
G1 X59.906 Y95.592 E0.01317 ; perimeter
G1 X59.519 Y95.690 E0.01644 ; perimeter
G1 X59.229 Y95.823 E0.01315 ; perimeter
G1 X58.890 Y96.062 E0.01707 ; perimeter
G1 X58.831 Y96.123 E0.00349 ; perimeter
G1 X57.807 Y95.263 E0.05507 ; perimeter
G1 X58.068 Y94.974 E0.01603 ; perimeter
G1 X58.346 Y94.743 E0.01491 ; perimeter
G1 X58.760 Y94.483 E0.02012 ; perimeter
G1 X59.126 Y94.322 E0.01649 ; perimeter
G1 X59.512 Y94.210 E0.01657 ; perimeter
G1 X59.910 Y94.149 E0.01657 ; perimeter
G1 X60.312 Y94.140 E0.01657 ; perimeter
G1 X60.597 Y94.172 E0.01184 ; perimeter
G1 X61.105 Y94.281 E0.02139 ; perimeter
G1 X61.477 Y94.426 E0.01644 ; perimeter
G1 X61.830 Y94.619 E0.01657 ; perimeter
G1 X62.160 Y94.861 E0.01688 ; perimeter
G1 X81.793 Y111.335 E1.05580 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X90.392 Y114.240 E0.18617 ; perimeter
G1 X89.577 Y115.212 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.257 Y114.972 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.024 Y113.134 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X48.761 Y106.864 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.501 Y106.646 E0.01396 ; perimeter
G1 X48.450 Y106.055 E0.02446 ; perimeter
G1 X56.398 Y96.583 E0.50938 ; perimeter
G1 X56.989 Y96.531 E0.02446 ; perimeter
G1 X57.249 Y96.749 E0.01396 ; perimeter
G1 X48.800 Y106.818 E0.54150 ; perimeter
M204 S1000 ; adjust acceleration
G1 X48.810 Y107.422 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.121 Y106.844 E0.03705 ; perimeter
G1 X48.041 Y105.926 E0.03799 ; perimeter
G1 X56.200 Y96.202 E0.52291 ; perimeter
G1 X57.118 Y96.122 E0.03799 ; perimeter
G1 X57.807 Y96.700 E0.03705 ; perimeter
G1 X55.358 Y99.619 E0.15696 ; perimeter
G1 X56.435 Y100.522 E0.05790 ; perimeter
G1 X56.091 Y100.932 E0.02205 ; perimeter
G1 X55.014 Y100.029 E0.05790 ; perimeter
G1 X51.603 Y104.094 E0.21861 ; perimeter
G1 X52.680 Y104.997 E0.05790 ; perimeter
G1 X52.335 Y105.407 E0.02205 ; perimeter
G1 X51.259 Y104.504 E0.05790 ; perimeter
G1 X48.848 Y107.377 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X48.859 Y107.981 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X47.740 Y107.043 E0.06014 ; perimeter
G1 X47.631 Y105.797 E0.05151 ; perimeter
G1 X56.002 Y95.822 E0.53643 ; perimeter
G1 X57.247 Y95.713 E0.05151 ; perimeter
G1 X58.365 Y96.651 E0.06014 ; perimeter
G1 X55.916 Y99.570 E0.15696 ; perimeter
G1 X56.993 Y100.473 E0.05790 ; perimeter
G1 X56.139 Y101.490 E0.05471 ; perimeter
G1 X55.063 Y100.587 E0.05790 ; perimeter
G1 X52.161 Y104.045 E0.18596 ; perimeter
G1 X53.238 Y104.948 E0.05790 ; perimeter
G1 X52.384 Y105.966 E0.05471 ; perimeter
G1 X51.308 Y105.062 E0.05790 ; perimeter
G1 X48.897 Y107.935 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X48.767 Y107.592 F10800.000 ; move inwards before travel
G1 F8640
G1 X47.740 Y107.043 E-0.33736 ; wipe and retract
G1 X47.631 Y105.797 E-0.28873 ; wipe and retract
G1 X48.004 Y105.353 E-0.13391 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X75.085 Y136.765 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X46.877 Y113.095 E1.51696 ; perimeter
G1 X46.605 Y112.834 E0.01554 ; perimeter
G1 X46.382 Y112.554 E0.01476 ; perimeter
G1 X46.197 Y112.245 E0.01482 ; perimeter
G1 X46.056 Y111.913 E0.01487 ; perimeter
G1 X45.960 Y111.563 E0.01491 ; perimeter
G1 X45.913 Y111.204 E0.01494 ; perimeter
G1 X45.914 Y110.841 E0.01495 ; perimeter
G1 X45.965 Y110.481 E0.01496 ; perimeter
G1 X46.068 Y110.120 E0.01549 ; perimeter
G1 X46.146 Y109.919 E0.00886 ; perimeter
G1 X46.319 Y109.597 E0.01507 ; perimeter
G1 X46.544 Y109.290 E0.01569 ; perimeter
G1 X47.438 Y108.225 E0.05727 ; perimeter
G1 X47.848 Y108.569 E0.02205 ; perimeter
G1 X47.087 Y109.476 E0.04877 ; perimeter
G1 X46.862 Y109.796 E0.01612 ; perimeter
G1 X46.685 Y110.176 E0.01725 ; perimeter
G1 X46.577 Y110.580 E0.01725 ; perimeter
G1 X46.541 Y110.997 E0.01725 ; perimeter
G1 X46.577 Y111.414 E0.01725 ; perimeter
G1 X46.685 Y111.819 E0.01725 ; perimeter
G1 X46.862 Y112.198 E0.01725 ; perimeter
G1 X47.102 Y112.541 E0.01725 ; perimeter
G1 X47.379 Y112.818 E0.01612 ; perimeter
G1 X75.430 Y136.355 E1.50847 ; perimeter
G1 X75.124 Y136.719 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.134 Y137.323 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.612 Y113.391 E1.53383 ; perimeter
G1 X46.311 Y113.102 E0.01718 ; perimeter
G1 X46.055 Y112.780 E0.01696 ; perimeter
G1 X45.843 Y112.425 E0.01703 ; perimeter
G1 X45.681 Y112.043 E0.01708 ; perimeter
G1 X45.571 Y111.642 E0.01713 ; perimeter
G1 X45.516 Y111.229 E0.01716 ; perimeter
G1 X45.518 Y110.812 E0.01718 ; perimeter
G1 X45.576 Y110.399 E0.01718 ; perimeter
G1 X45.691 Y109.994 E0.01737 ; perimeter
G1 X45.785 Y109.753 E0.01065 ; perimeter
G1 X45.983 Y109.386 E0.01716 ; perimeter
G1 X46.232 Y109.045 E0.01739 ; perimeter
G1 X47.389 Y107.667 E0.07414 ; perimeter
G1 X48.406 Y108.520 E0.05471 ; perimeter
G1 X47.402 Y109.717 E0.06438 ; perimeter
G1 X47.207 Y109.995 E0.01398 ; perimeter
G1 X47.059 Y110.312 E0.01439 ; perimeter
G1 X46.969 Y110.649 E0.01439 ; perimeter
G1 X46.938 Y110.997 E0.01439 ; perimeter
G1 X46.969 Y111.345 E0.01439 ; perimeter
G1 X47.059 Y111.683 E0.01439 ; perimeter
G1 X47.207 Y111.999 E0.01439 ; perimeter
G1 X47.407 Y112.285 E0.01439 ; perimeter
G1 X47.647 Y112.525 E0.01398 ; perimeter
G1 X75.988 Y136.306 E1.52408 ; perimeter
G1 X75.173 Y137.277 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X74.831 Y137.063 F10800.000 ; move inwards before travel
G1 F8640
G1 X72.648 Y135.166 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X150.379 Y113.962 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.379 Y113.560 E0.01656 ; perimeter
G1 X152.217 Y113.166 E0.07745 ; perimeter
G1 X152.217 Y113.567 E0.01653 ; perimeter
G1 X150.437 Y113.951 E0.07499 ; perimeter
M204 S1000 ; adjust acceleration
G1 X149.982 Y114.446 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X149.982 Y113.238 E0.04975 ; perimeter
G1 X151.779 Y112.862 E0.07562 ; perimeter
G1 X152.613 Y112.665 E0.03532 ; perimeter
G1 X152.613 Y113.884 E0.05023 ; perimeter
G1 X151.239 Y114.194 E0.05804 ; perimeter
G1 X150.041 Y114.434 E0.05033 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.157 Y114.086 F10800.000 ; move inwards before travel
G1 F8640
G1 X149.982 Y113.238 E-0.27644 ; wipe and retract
G1 X151.779 Y112.862 E-0.42385 ; wipe and retract
G1 X152.031 Y112.803 E-0.05971 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X172.166 Y130.233 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X160.952 Y116.869 E0.71866 ; perimeter
G1 X161.004 Y116.278 E0.02446 ; perimeter
G1 X161.264 Y116.060 E0.01396 ; perimeter
G1 X173.017 Y130.067 E0.75325 ; perimeter
G1 X172.757 Y130.284 E0.01396 ; perimeter
G1 X172.226 Y130.238 E0.02199 ; perimeter
M204 S1000 ; adjust acceleration
G1 X171.968 Y130.613 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.543 Y116.998 E0.73218 ; perimeter
G1 X160.624 Y116.080 E0.03799 ; perimeter
G1 X161.313 Y115.502 E0.03705 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X164.509 Y117.793 E0.04017 ; perimeter
G1 X164.853 Y118.203 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.04017 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X171.529 Y126.160 E0.04017 ; perimeter
G1 X171.873 Y126.570 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.04017 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X172.886 Y130.694 E0.03705 ; perimeter
G1 X172.028 Y130.619 E0.03551 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X169.906 Y128.102 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X163.810 Y117.862 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F3600
G1 X164.557 Y117.235 E0.04017 ; perimeter
G1 X165.411 Y118.252 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.04017 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X171.578 Y125.602 E0.04017 ; perimeter
G1 X172.432 Y126.619 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.04017 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.015 Y131.103 E0.06014 ; perimeter
G1 X171.770 Y130.994 E0.05151 ; perimeter
G1 X160.134 Y117.127 E0.74571 ; perimeter
G1 X160.243 Y115.881 E0.05151 ; perimeter
G1 X161.361 Y114.943 E0.06014 ; perimeter
G1 X163.772 Y117.816 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X164.103 Y118.135 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.557 Y117.235 E-0.22558 ; wipe and retract
G1 X165.411 Y118.252 E-0.30664 ; wipe and retract
G1 X164.664 Y118.879 E-0.22515 ; wipe and retract
G1 X164.671 Y118.888 E-0.00264 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y139.253 E0.04011 ; perimeter
G1 X169.775 Y139.253 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.04011 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.462 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.857 E0.06321 ; perimeter
G1 X170.171 Y138.857 E0.21040 ; perimeter
G1 X170.171 Y140.391 E0.06321 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.522 Y140.789 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.298 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y138.460 E0.08630 ; perimeter
G1 X170.567 Y138.460 E0.24306 ; perimeter
G1 X170.567 Y140.555 E0.08630 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.358 Y141.185 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.282 Y140.786 F10800.000 ; move inwards before travel
G1 X165.686 Y140.278 ; move to first infill point
G1 F7168.59
G1 X166.395 Y139.569 E0.05230 ; infill
G1 X167.105 Y139.569 E0.03707 ; infill
G1 X166.598 Y140.077 E0.03747 ; infill
G1 X167.308 Y140.077 E0.03707 ; infill
G1 X167.815 Y139.569 E0.03747 ; infill
G1 X168.526 Y139.569 E0.03707 ; infill
G1 X168.018 Y140.077 E0.03747 ; infill
G1 X168.728 Y140.077 E0.03707 ; infill
G1 X169.236 Y139.569 E0.03747 ; infill
G1 X169.459 Y139.569 E0.01163 ; infill
G1 X169.459 Y140.056 E0.02544 ; infill
G1 X169.238 Y140.278 E0.01633 ; infill
G1 F8640
G1 X169.459 Y140.056 E-0.07222 ; wipe and retract
G1 X169.459 Y139.569 E-0.11252 ; wipe and retract
G1 X169.236 Y139.569 E-0.05147 ; wipe and retract
G1 X168.728 Y140.077 E-0.16576 ; wipe and retract
G1 X168.018 Y140.077 E-0.16399 ; wipe and retract
G1 X168.526 Y139.569 E-0.16576 ; wipe and retract
G1 X168.403 Y139.569 E-0.02829 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X174.344 Y136.765 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X174.000 Y136.355 E0.02205 ; perimeter
G1 X202.050 Y112.818 E1.50847 ; perimeter
G1 X202.327 Y112.541 E0.01613 ; perimeter
G1 X202.567 Y112.198 E0.01725 ; perimeter
G1 X202.744 Y111.819 E0.01725 ; perimeter
G1 X202.853 Y111.414 E0.01725 ; perimeter
G1 X202.889 Y110.997 E0.01725 ; perimeter
G1 X202.853 Y110.580 E0.01725 ; perimeter
G1 X202.744 Y110.176 E0.01725 ; perimeter
G1 X202.567 Y109.796 E0.01725 ; perimeter
G1 X202.343 Y109.476 E0.01612 ; perimeter
G1 X201.582 Y108.569 E0.04877 ; perimeter
G1 X201.992 Y108.225 E0.02205 ; perimeter
G1 X202.885 Y109.289 E0.05725 ; perimeter
G1 X203.111 Y109.599 E0.01576 ; perimeter
G1 X203.284 Y109.919 E0.01502 ; perimeter
G1 X203.369 Y110.139 E0.00969 ; perimeter
G1 X203.490 Y110.605 E0.01985 ; perimeter
G1 X203.522 Y110.963 E0.01479 ; perimeter
G1 X203.506 Y111.328 E0.01505 ; perimeter
G1 X203.471 Y111.557 E0.00956 ; perimeter
G1 X203.376 Y111.905 E0.01488 ; perimeter
G1 X203.179 Y112.339 E0.01962 ; perimeter
G1 X203.049 Y112.552 E0.01026 ; perimeter
G1 X202.825 Y112.834 E0.01487 ; perimeter
G1 X202.552 Y113.095 E0.01555 ; perimeter
G1 X174.390 Y136.726 E1.51449 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.295 Y137.323 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X173.442 Y136.306 E0.05471 ; perimeter
G1 X201.782 Y112.525 E1.52408 ; perimeter
G1 X202.022 Y112.285 E0.01398 ; perimeter
G1 X202.223 Y111.999 E0.01439 ; perimeter
G1 X202.370 Y111.683 E0.01439 ; perimeter
G1 X202.461 Y111.345 E0.01439 ; perimeter
G1 X202.491 Y110.997 E0.01439 ; perimeter
G1 X202.461 Y110.649 E0.01439 ; perimeter
G1 X202.370 Y110.312 E0.01439 ; perimeter
G1 X202.223 Y109.995 E0.01439 ; perimeter
G1 X202.028 Y109.717 E0.01398 ; perimeter
G1 X201.024 Y108.520 E0.06438 ; perimeter
G1 X202.041 Y107.667 E0.05471 ; perimeter
G1 X203.197 Y109.045 E0.07413 ; perimeter
G1 X203.447 Y109.387 E0.01742 ; perimeter
G1 X203.645 Y109.753 E0.01715 ; perimeter
G1 X203.741 Y110.000 E0.01095 ; perimeter
G1 X203.882 Y110.543 E0.02308 ; perimeter
G1 X203.919 Y110.953 E0.01699 ; perimeter
G1 X203.901 Y111.367 E0.01704 ; perimeter
G1 X203.859 Y111.640 E0.01139 ; perimeter
G1 X203.750 Y112.041 E0.01712 ; perimeter
G1 X203.530 Y112.524 E0.02190 ; perimeter
G1 X203.375 Y112.779 E0.01226 ; perimeter
G1 X203.118 Y113.102 E0.01699 ; perimeter
G1 X202.817 Y113.391 E0.01718 ; perimeter
G1 X174.341 Y137.285 E1.53136 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.226 Y136.929 F10800.000 ; move inwards before travel
G1 F8640
G1 X173.442 Y136.306 E-0.30695 ; wipe and retract
G1 X174.945 Y135.045 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X200.669 Y106.864 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X192.181 Y96.749 E0.54397 ; perimeter
G1 X192.440 Y96.531 E0.01396 ; perimeter
G1 X193.032 Y96.583 E0.02446 ; perimeter
G1 X200.980 Y106.055 E0.50938 ; perimeter
G1 X200.928 Y106.646 E0.02446 ; perimeter
G1 X200.715 Y106.826 E0.01148 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.620 Y107.422 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.171 Y104.504 E0.15696 ; perimeter
G1 X197.094 Y105.407 E0.05790 ; perimeter
G1 X196.750 Y104.997 E0.02205 ; perimeter
G1 X197.827 Y104.094 E0.05790 ; perimeter
G1 X194.416 Y100.029 E0.21861 ; perimeter
G1 X193.339 Y100.932 E0.05790 ; perimeter
G1 X192.995 Y100.522 E0.02205 ; perimeter
G1 X194.072 Y99.619 E0.05790 ; perimeter
G1 X191.623 Y96.700 E0.15696 ; perimeter
G1 X192.311 Y96.122 E0.03705 ; perimeter
G1 X193.230 Y96.202 E0.03799 ; perimeter
G1 X201.389 Y105.926 E0.52291 ; perimeter
G1 X201.309 Y106.844 E0.03799 ; perimeter
G1 X200.666 Y107.384 E0.03457 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.571 Y107.981 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.122 Y105.062 E0.15696 ; perimeter
G1 X197.045 Y105.966 E0.05790 ; perimeter
G1 X196.192 Y104.948 E0.05471 ; perimeter
G1 X197.268 Y104.045 E0.05790 ; perimeter
G1 X194.367 Y100.587 E0.18596 ; perimeter
G1 X193.290 Y101.490 E0.05790 ; perimeter
G1 X192.437 Y100.473 E0.05471 ; perimeter
G1 X193.513 Y99.570 E0.05790 ; perimeter
G1 X191.064 Y96.651 E0.15696 ; perimeter
G1 X192.182 Y95.713 E0.06014 ; perimeter
G1 X193.428 Y95.822 E0.05151 ; perimeter
G1 X201.798 Y105.797 E0.53643 ; perimeter
G1 X201.689 Y107.043 E0.05151 ; perimeter
G1 X200.617 Y107.942 E0.05767 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.455 Y107.598 F10800.000 ; move inwards before travel
G1 F8640
G1 X198.462 Y105.455 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
G1 X159.940 Y114.699 ; move to first perimeter point
G1 Z21.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.596 Y114.289 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.16390 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X187.509 Y95.178 E1.06093 ; perimeter
G1 X187.883 Y94.916 E0.01878 ; perimeter
G1 X188.121 Y94.786 E0.01118 ; perimeter
G1 X188.447 Y94.659 E0.01443 ; perimeter
G1 X188.787 Y94.575 E0.01443 ; perimeter
G1 X189.136 Y94.537 E0.01444 ; perimeter
G1 X189.485 Y94.545 E0.01441 ; perimeter
G1 X189.832 Y94.598 E0.01443 ; perimeter
G1 X190.168 Y94.695 E0.01443 ; perimeter
G1 X190.490 Y94.837 E0.01449 ; perimeter
G1 X190.761 Y94.999 E0.01300 ; perimeter
G1 X191.047 Y95.229 E0.01513 ; perimeter
G1 X190.590 Y95.613 E0.02457 ; perimeter
G1 X190.399 Y95.479 E0.00959 ; perimeter
G1 X190.043 Y95.315 E0.01615 ; perimeter
G1 X189.588 Y95.199 E0.01937 ; perimeter
G1 X189.202 Y95.170 E0.01592 ; perimeter
G1 X188.892 Y95.198 E0.01282 ; perimeter
G1 X188.438 Y95.301 E0.01919 ; perimeter
G1 X188.006 Y95.501 E0.01962 ; perimeter
G1 X187.699 Y95.717 E0.01545 ; perimeter
G1 X167.976 Y112.267 E1.06068 ; perimeter
M73 Q93 S10
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.986 Y114.661 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.892 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.038 Y114.240 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.18617 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X187.268 Y94.863 E1.05570 ; perimeter
G1 X187.673 Y94.579 E0.02038 ; perimeter
G1 X187.953 Y94.426 E0.01314 ; perimeter
G1 X188.328 Y94.280 E0.01657 ; perimeter
G1 X188.718 Y94.184 E0.01657 ; perimeter
G1 X189.229 Y94.143 E0.02113 ; perimeter
G1 X189.520 Y94.149 E0.01197 ; perimeter
G1 X189.917 Y94.210 E0.01657 ; perimeter
G1 X190.304 Y94.322 E0.01657 ; perimeter
G1 X190.672 Y94.484 E0.01659 ; perimeter
G1 X190.985 Y94.671 E0.01501 ; perimeter
G1 X191.268 Y94.891 E0.01474 ; perimeter
G1 X191.626 Y95.261 E0.02122 ; perimeter
G1 X190.599 Y96.123 E0.05524 ; perimeter
G1 X190.539 Y96.062 E0.00349 ; perimeter
G1 X190.201 Y95.823 E0.01707 ; perimeter
G1 X189.911 Y95.690 E0.01315 ; perimeter
G1 X189.524 Y95.592 E0.01644 ; perimeter
G1 X189.205 Y95.568 E0.01317 ; perimeter
G1 X188.954 Y95.590 E0.01039 ; perimeter
G1 X188.567 Y95.678 E0.01636 ; perimeter
G1 X188.205 Y95.845 E0.01641 ; perimeter
G1 X187.942 Y96.031 E0.01328 ; perimeter
G1 X168.120 Y112.663 E1.06594 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
M73 P93 R9
G1 X159.938 Y115.219 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.874 Y114.858 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;21.25


G1 F8640
G1 X159.038 Y114.240 E-0.30695 ; wipe and retract
G1 X160.541 Y112.979 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;21.25
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y101.107 E0.04011 ; perimeter
G1 X84.255 Y101.107 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.04011 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.253 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.711 E0.06321 ; perimeter
G1 X84.651 Y100.711 E0.21040 ; perimeter
G1 X84.651 Y102.245 E0.06321 ; perimeter
G1 X84.296 Y102.600 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.417 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y100.314 E0.08630 ; perimeter
G1 X85.047 Y100.314 E0.24305 ; perimeter
G1 X85.047 Y102.409 E0.08630 ; perimeter
G1 X84.460 Y102.997 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.087 Y102.814 F10800.000 ; move inwards before travel
G1 X84.028 Y102.131 ; move to first infill point
G1 F7168.6
G1 X83.320 Y101.423 E0.05230 ; infill
G1 X82.610 Y101.423 E0.03707 ; infill
G1 X83.117 Y101.931 E0.03747 ; infill
G1 X82.407 Y101.931 E0.03707 ; infill
G1 X81.899 Y101.423 E0.03747 ; infill
G1 X81.189 Y101.423 E0.03707 ; infill
G1 X81.697 Y101.931 E0.03747 ; infill
G1 X80.987 Y101.931 E0.03707 ; infill
G1 X80.479 Y101.423 E0.03747 ; infill
G1 X80.256 Y101.423 E0.01163 ; infill
G1 X80.256 Y101.910 E0.02544 ; infill
G1 X80.477 Y102.131 E0.01631 ; infill
G1 F8640
G1 X80.256 Y101.910 E-0.07217 ; wipe and retract
G1 X80.256 Y101.423 E-0.11255 ; wipe and retract
G1 X80.479 Y101.423 E-0.05143 ; wipe and retract
G1 X80.987 Y101.931 E-0.16576 ; wipe and retract
G1 X81.697 Y101.931 E-0.16399 ; wipe and retract
G1 X81.189 Y101.423 E-0.16576 ; wipe and retract
G1 X81.312 Y101.423 E-0.02834 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X77.488 Y92.092 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X76.957 Y92.138 E0.02196 ; perimeter
G1 X76.698 Y91.921 E0.01396 ; perimeter
G1 X88.451 Y77.914 E0.75325 ; perimeter
G1 X88.711 Y78.132 E0.01396 ; perimeter
G1 X88.757 Y78.662 E0.02195 ; perimeter
G1 X77.527 Y92.046 E0.71973 ; perimeter
M204 S1000 ; adjust acceleration
G1 X77.686 Y92.472 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.828 Y92.547 E0.03548 ; perimeter
G1 X76.140 Y91.969 E0.03705 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X77.904 Y88.476 E0.03682 ; perimeter
G1 X78.248 Y88.066 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.03682 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X84.924 Y80.110 E0.03682 ; perimeter
G1 X85.268 Y79.699 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.03682 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X89.091 Y77.933 E0.03705 ; perimeter
G1 X89.166 Y78.791 E0.03548 ; perimeter
G1 X77.725 Y92.426 E0.73325 ; perimeter
M204 S1000 ; adjust acceleration
G1 X77.885 Y92.853 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X76.699 Y92.957 E0.04901 ; perimeter
G1 X75.581 Y92.018 E0.06014 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X77.345 Y88.525 E0.03682 ; perimeter
G1 X78.199 Y87.508 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.03682 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X84.366 Y80.158 E0.03682 ; perimeter
G1 X85.220 Y79.141 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.03682 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.472 Y77.735 E0.06014 ; perimeter
G1 X89.575 Y78.920 E0.04901 ; perimeter
G1 X77.923 Y92.807 E0.74678 ; perimeter
M204 S1000 ; adjust acceleration
G1 X77.574 Y92.600 F10800.000 ; move inwards before travel
G1 F8640
G1 X76.699 Y92.957 E-0.28466 ; wipe and retract
G1 X75.581 Y92.018 E-0.33707 ; wipe and retract
G1 X75.966 Y91.560 E-0.13827 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X99.086 Y75.620 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.318 Y75.458 E0.03236 ; perimeter
G1 X99.028 Y75.607 E0.02992 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.483 Y76.104 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.352 Y75.648 E0.08978 ; perimeter
G1 X97.352 Y74.835 E0.03349 ; perimeter
G1 X99.483 Y75.298 E0.08984 ; perimeter
G1 X99.483 Y76.044 E0.03075 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.103 Y75.978 F10800.000 ; move inwards before travel
G1 F8640
G1 X97.352 Y75.648 E-0.50049 ; wipe and retract
G1 X97.352 Y74.835 E-0.18772 ; wipe and retract
G1 X97.655 Y74.901 E-0.07178 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X89.774 Y76.553 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.15587 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X62.016 Y57.571 E1.06066 ; perimeter
G1 X61.713 Y57.357 E0.01528 ; perimeter
G1 X61.269 Y57.152 E0.02015 ; perimeter
G1 X60.804 Y57.050 E0.01958 ; perimeter
G1 X60.517 Y57.024 E0.01191 ; perimeter
G1 X60.137 Y57.052 E0.01568 ; perimeter
G1 X59.671 Y57.168 E0.01977 ; perimeter
G1 X59.320 Y57.330 E0.01595 ; perimeter
G1 X59.126 Y57.467 E0.00978 ; perimeter
G1 X58.667 Y57.082 E0.02464 ; perimeter
G1 X58.855 Y56.926 E0.01008 ; perimeter
G1 X59.232 Y56.688 E0.01836 ; perimeter
G1 X59.547 Y56.549 E0.01419 ; perimeter
G1 X59.883 Y56.451 E0.01443 ; perimeter
G1 X60.229 Y56.398 E0.01443 ; perimeter
G1 X60.580 Y56.391 E0.01443 ; perimeter
G1 X60.825 Y56.418 E0.01017 ; perimeter
G1 X61.268 Y56.513 E0.01866 ; perimeter
G1 X61.594 Y56.640 E0.01443 ; perimeter
G1 X61.901 Y56.808 E0.01443 ; perimeter
G1 X62.200 Y57.027 E0.01527 ; perimeter
G1 X81.934 Y73.586 E1.06121 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.118 Y76.143 E0.16390 ; perimeter
G1 X89.813 Y76.507 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.823 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.16626 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X61.773 Y57.885 E1.06593 ; perimeter
G1 X61.514 Y57.701 E0.01310 ; perimeter
G1 X61.142 Y57.530 E0.01688 ; perimeter
G1 X60.744 Y57.442 E0.01676 ; perimeter
G1 X60.513 Y57.422 E0.00956 ; perimeter
G1 X60.200 Y57.444 E0.01295 ; perimeter
G1 X59.803 Y57.544 E0.01683 ; perimeter
G1 X59.518 Y57.675 E0.01293 ; perimeter
G1 X59.116 Y57.976 E0.02071 ; perimeter
G1 X58.092 Y57.117 E0.05506 ; perimeter
G1 X58.348 Y56.833 E0.01575 ; perimeter
G1 X58.621 Y56.605 E0.01467 ; perimeter
G1 X59.045 Y56.337 E0.02067 ; perimeter
G1 X59.412 Y56.176 E0.01648 ; perimeter
G1 X59.798 Y56.064 E0.01656 ; perimeter
G1 X60.195 Y56.003 E0.01656 ; perimeter
G1 X60.597 Y55.994 E0.01657 ; perimeter
G1 X60.997 Y56.038 E0.01656 ; perimeter
G1 X61.387 Y56.134 E0.01657 ; perimeter
G1 X61.762 Y56.280 E0.01657 ; perimeter
G1 X62.115 Y56.473 E0.01657 ; perimeter
G1 X62.445 Y56.715 E0.01687 ; perimeter
G1 X82.078 Y73.189 E1.05580 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X90.677 Y76.094 E0.18617 ; perimeter
G1 X89.862 Y77.065 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.543 Y76.826 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.309 Y74.987 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X49.046 Y68.718 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.787 Y68.500 E0.01396 ; perimeter
G1 X48.740 Y67.969 E0.02196 ; perimeter
G1 X56.743 Y58.431 E0.51292 ; perimeter
G1 X57.274 Y58.385 E0.02195 ; perimeter
G1 X57.534 Y58.603 E0.01396 ; perimeter
G1 X55.250 Y61.324 E0.14635 ; perimeter
G1 X55.217 Y61.296 E0.00177 ; perimeter
G1 X51.297 Y65.969 E0.25127 ; perimeter
G1 X51.330 Y65.996 E0.00177 ; perimeter
G1 X49.085 Y68.672 E0.14388 ; perimeter
M204 S1000 ; adjust acceleration
G1 X49.095 Y69.276 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.406 Y68.698 E0.03705 ; perimeter
G1 X48.331 Y67.840 E0.03548 ; perimeter
G1 X56.545 Y58.051 E0.52645 ; perimeter
G1 X57.403 Y57.976 E0.03548 ; perimeter
G1 X58.092 Y58.554 E0.03705 ; perimeter
G1 X55.643 Y61.472 E0.15696 ; perimeter
G1 X56.444 Y62.144 E0.04306 ; perimeter
G1 X56.100 Y62.554 E0.02205 ; perimeter
G1 X55.266 Y61.855 E0.04484 ; perimeter
G1 X51.855 Y65.920 E0.21861 ; perimeter
G1 X52.689 Y66.620 E0.04484 ; perimeter
G1 X52.345 Y67.030 E0.02205 ; perimeter
G1 X51.544 Y66.358 E0.04306 ; perimeter
G1 X49.134 Y69.230 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X49.144 Y69.835 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.026 Y68.896 E0.06014 ; perimeter
G1 X47.922 Y67.711 E0.04901 ; perimeter
G1 X56.347 Y57.670 E0.53998 ; perimeter
G1 X57.532 Y57.567 E0.04901 ; perimeter
G1 X58.651 Y58.505 E0.06014 ; perimeter
G1 X56.202 Y61.424 E0.15696 ; perimeter
G1 X57.002 Y62.095 E0.04306 ; perimeter
G1 X56.149 Y63.113 E0.05471 ; perimeter
G1 X55.315 Y62.413 E0.04484 ; perimeter
G1 X52.414 Y65.871 E0.18596 ; perimeter
G1 X53.247 Y66.571 E0.04484 ; perimeter
G1 X52.394 Y67.588 E0.05471 ; perimeter
G1 X51.593 Y66.916 E0.04306 ; perimeter
G1 X49.182 Y69.789 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X49.041 Y69.448 F10800.000 ; move inwards before travel
G1 F8640
G1 X48.026 Y68.896 E-0.33736 ; wipe and retract
G1 X47.922 Y67.711 E-0.27469 ; wipe and retract
G1 X48.334 Y67.220 E-0.14795 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X75.179 Y98.458 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.163 Y74.949 E1.50666 ; perimeter
G1 X46.889 Y74.686 E0.01564 ; perimeter
G1 X46.665 Y74.404 E0.01485 ; perimeter
G1 X46.480 Y74.093 E0.01490 ; perimeter
G1 X46.339 Y73.759 E0.01494 ; perimeter
G1 X46.242 Y73.400 E0.01530 ; perimeter
G1 X46.210 Y73.194 E0.00861 ; perimeter
G1 X46.192 Y72.825 E0.01519 ; perimeter
G1 X46.224 Y72.466 E0.01487 ; perimeter
G1 X46.304 Y72.113 E0.01491 ; perimeter
G1 X46.431 Y71.773 E0.01494 ; perimeter
G1 X46.603 Y71.454 E0.01496 ; perimeter
G1 X46.830 Y71.143 E0.01584 ; perimeter
G1 X47.723 Y70.079 E0.05724 ; perimeter
G1 X48.133 Y70.423 E0.02205 ; perimeter
G1 X47.372 Y71.330 E0.04877 ; perimeter
G1 X47.148 Y71.650 E0.01612 ; perimeter
G1 X46.971 Y72.030 E0.01725 ; perimeter
G1 X46.862 Y72.434 E0.01725 ; perimeter
G1 X46.826 Y72.851 E0.01725 ; perimeter
G1 X46.862 Y73.268 E0.01725 ; perimeter
G1 X46.971 Y73.673 E0.01725 ; perimeter
G1 X47.148 Y74.052 E0.01725 ; perimeter
G1 X47.388 Y74.395 E0.01725 ; perimeter
G1 X47.664 Y74.672 E0.01612 ; perimeter
G1 X75.523 Y98.048 E1.49817 ; perimeter
G1 X75.218 Y98.412 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.228 Y99.017 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.898 Y75.244 E1.52353 ; perimeter
G1 X46.595 Y74.954 E0.01729 ; perimeter
G1 X46.338 Y74.630 E0.01705 ; perimeter
G1 X46.125 Y74.272 E0.01711 ; perimeter
G1 X45.963 Y73.889 E0.01717 ; perimeter
G1 X45.853 Y73.483 E0.01732 ; perimeter
G1 X45.815 Y73.234 E0.01038 ; perimeter
G1 X45.795 Y72.818 E0.01716 ; perimeter
G1 X45.831 Y72.405 E0.01708 ; perimeter
G1 X45.923 Y71.999 E0.01712 ; perimeter
G1 X46.069 Y71.609 E0.01716 ; perimeter
G1 X46.267 Y71.242 E0.01718 ; perimeter
G1 X46.517 Y70.899 E0.01750 ; perimeter
G1 X47.674 Y69.520 E0.07413 ; perimeter
G1 X48.691 Y70.374 E0.05471 ; perimeter
G1 X47.687 Y71.571 E0.06438 ; perimeter
G1 X47.492 Y71.849 E0.01398 ; perimeter
G1 X47.344 Y72.166 E0.01439 ; perimeter
G1 X47.254 Y72.503 E0.01439 ; perimeter
G1 X47.224 Y72.851 E0.01439 ; perimeter
G1 X47.254 Y73.199 E0.01439 ; perimeter
G1 X47.344 Y73.537 E0.01439 ; perimeter
G1 X47.492 Y73.853 E0.01439 ; perimeter
G1 X47.692 Y74.139 E0.01439 ; perimeter
G1 X47.932 Y74.379 E0.01398 ; perimeter
G1 X76.082 Y97.999 E1.51378 ; perimeter
G1 X75.267 Y98.971 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X74.925 Y98.756 F10800.000 ; move inwards before travel
G1 F8640
G1 X72.742 Y96.859 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X150.914 Y75.620 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.682 Y75.458 E0.03236 ; perimeter
G1 X150.973 Y75.608 E0.02989 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.517 Y76.104 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.517 Y75.298 E0.03322 ; perimeter
G1 X152.648 Y74.835 E0.08984 ; perimeter
G1 X152.648 Y75.648 E0.03350 ; perimeter
G1 X150.576 Y76.092 E0.08731 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.652 Y75.728 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.517 Y75.298 E-0.18400 ; wipe and retract
G1 X152.648 Y74.835 E-0.50354 ; wipe and retract
G1 X152.648 Y75.148 E-0.07246 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X172.512 Y92.092 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X161.243 Y78.662 E0.72220 ; perimeter
G1 X161.289 Y78.132 E0.02195 ; perimeter
G1 X161.549 Y77.914 E0.01396 ; perimeter
G1 X173.302 Y91.921 E0.75325 ; perimeter
G1 X173.043 Y92.138 E0.01396 ; perimeter
G1 X172.571 Y92.097 E0.01948 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.314 Y92.472 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.834 Y78.791 E0.73573 ; perimeter
G1 X160.909 Y77.933 E0.03548 ; perimeter
G1 X161.598 Y77.355 E0.03705 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X164.732 Y79.699 E0.03682 ; perimeter
G1 X165.076 Y80.110 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.03682 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X171.752 Y88.066 E0.03682 ; perimeter
G1 X172.096 Y88.476 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.03682 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.172 Y92.547 E0.03705 ; perimeter
G1 X172.373 Y92.478 E0.03301 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.115 Y92.853 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.425 Y78.920 E0.74925 ; perimeter
G1 X160.528 Y77.735 E0.04901 ; perimeter
G1 X161.647 Y76.797 E0.06014 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X164.780 Y79.141 E0.03682 ; perimeter
G1 X165.634 Y80.158 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.03682 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X171.801 Y87.508 E0.03682 ; perimeter
G1 X172.655 Y88.525 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.03682 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.301 Y92.957 E0.06014 ; perimeter
G1 X172.175 Y92.858 E0.04654 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.092 Y92.454 F10800.000 ; move inwards before travel
G1 F8640
G1 X170.054 Y90.342 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y101.107 E0.04011 ; perimeter
G1 X170.060 Y101.107 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.04011 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.747 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.711 E0.06321 ; perimeter
G1 X170.456 Y100.711 E0.21040 ; perimeter
G1 X170.456 Y102.245 E0.06321 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.807 Y102.643 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.583 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y100.314 E0.08630 ; perimeter
G1 X170.853 Y100.314 E0.24306 ; perimeter
G1 X170.853 Y102.409 E0.08630 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.643 Y103.039 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.567 Y102.640 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.953 Y102.409 E-0.21581 ; wipe and retract
G1 X164.953 Y100.314 E-0.48370 ; wipe and retract
G1 X165.215 Y100.314 E-0.06049 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X166.282 Y102.131 ; move to first infill point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.59
G1 X166.061 Y101.910 E0.01631 ; infill
G1 X166.061 Y101.423 E0.02544 ; infill
G1 X166.284 Y101.423 E0.01163 ; infill
G1 X166.792 Y101.931 E0.03747 ; infill
G1 X167.502 Y101.931 E0.03707 ; infill
G1 X166.994 Y101.423 E0.03747 ; infill
G1 X167.704 Y101.423 E0.03707 ; infill
G1 X168.212 Y101.931 E0.03747 ; infill
G1 X168.922 Y101.931 E0.03707 ; infill
G1 X168.415 Y101.423 E0.03747 ; infill
G1 X169.125 Y101.423 E0.03707 ; infill
G1 X169.833 Y102.131 E0.05230 ; infill
G1 F8640
G1 X169.125 Y101.423 E-0.23135 ; wipe and retract
G1 X168.415 Y101.423 E-0.16399 ; wipe and retract
G1 X168.922 Y101.931 E-0.16576 ; wipe and retract
G1 X168.212 Y101.931 E-0.16399 ; wipe and retract
G1 X168.105 Y101.824 E-0.03492 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X174.821 Y98.458 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X174.477 Y98.048 E0.02205 ; perimeter
G1 X202.336 Y74.672 E1.49817 ; perimeter
G1 X202.612 Y74.395 E0.01613 ; perimeter
G1 X202.852 Y74.052 E0.01725 ; perimeter
G1 X203.029 Y73.673 E0.01725 ; perimeter
G1 X203.138 Y73.268 E0.01725 ; perimeter
G1 X203.174 Y72.851 E0.01725 ; perimeter
G1 X203.138 Y72.434 E0.01725 ; perimeter
G1 X203.029 Y72.030 E0.01725 ; perimeter
G1 X202.852 Y71.650 E0.01725 ; perimeter
G1 X202.628 Y71.330 E0.01612 ; perimeter
G1 X201.867 Y70.423 E0.04877 ; perimeter
G1 X202.277 Y70.079 E0.02205 ; perimeter
G1 X203.170 Y71.143 E0.05724 ; perimeter
G1 X203.397 Y71.454 E0.01584 ; perimeter
G1 X203.571 Y71.777 E0.01512 ; perimeter
G1 X203.648 Y71.974 E0.00873 ; perimeter
G1 X203.776 Y72.466 E0.02093 ; perimeter
G1 X203.808 Y72.825 E0.01487 ; perimeter
G1 X203.790 Y73.194 E0.01519 ; perimeter
G1 X203.758 Y73.400 E0.00861 ; perimeter
G1 X203.661 Y73.759 E0.01530 ; perimeter
G1 X203.467 Y74.188 E0.01940 ; perimeter
G1 X203.337 Y74.402 E0.01030 ; perimeter
G1 X203.111 Y74.686 E0.01497 ; perimeter
G1 X202.837 Y74.949 E0.01564 ; perimeter
G1 X174.867 Y98.420 E1.50418 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.772 Y99.017 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X173.918 Y97.999 E0.05471 ; perimeter
G1 X202.068 Y74.379 E1.51378 ; perimeter
G1 X202.308 Y74.139 E0.01398 ; perimeter
G1 X202.508 Y73.853 E0.01439 ; perimeter
G1 X202.656 Y73.537 E0.01439 ; perimeter
G1 X202.746 Y73.199 E0.01439 ; perimeter
G1 X202.776 Y72.851 E0.01439 ; perimeter
G1 X202.746 Y72.503 E0.01439 ; perimeter
G1 X202.656 Y72.166 E0.01439 ; perimeter
G1 X202.508 Y71.849 E0.01439 ; perimeter
G1 X202.313 Y71.571 E0.01398 ; perimeter
G1 X201.309 Y70.374 E0.06438 ; perimeter
G1 X202.326 Y69.520 E0.05471 ; perimeter
G1 X203.483 Y70.899 E0.07413 ; perimeter
G1 X203.733 Y71.242 E0.01750 ; perimeter
G1 X203.931 Y71.610 E0.01724 ; perimeter
G1 X204.019 Y71.836 E0.00998 ; perimeter
G1 X204.076 Y71.997 E0.00704 ; perimeter
G1 X204.169 Y72.405 E0.01720 ; perimeter
G1 X204.205 Y72.818 E0.01708 ; perimeter
G1 X204.185 Y73.234 E0.01716 ; perimeter
G1 X204.147 Y73.483 E0.01038 ; perimeter
G1 X204.037 Y73.889 E0.01732 ; perimeter
G1 X203.809 Y74.389 E0.02264 ; perimeter
G1 X203.663 Y74.629 E0.01157 ; perimeter
G1 X203.405 Y74.954 E0.01710 ; perimeter
G1 X203.102 Y75.244 E0.01729 ; perimeter
G1 X174.818 Y98.978 E1.52106 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.702 Y98.623 F10800.000 ; move inwards before travel
G1 F8640
G1 X173.918 Y97.999 E-0.30695 ; wipe and retract
G1 X175.421 Y96.738 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X200.954 Y68.718 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.670 Y65.996 E0.14635 ; perimeter
G1 X198.703 Y65.969 E0.00177 ; perimeter
G1 X194.783 Y61.296 E0.25127 ; perimeter
G1 X194.750 Y61.324 E0.00177 ; perimeter
G1 X192.466 Y58.603 E0.14635 ; perimeter
G1 X192.726 Y58.385 E0.01396 ; perimeter
G1 X193.257 Y58.431 E0.02195 ; perimeter
G1 X201.260 Y67.969 E0.51292 ; perimeter
G1 X201.213 Y68.500 E0.02195 ; perimeter
G1 X201.000 Y68.679 E0.01148 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.905 Y69.276 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.456 Y66.358 E0.15696 ; perimeter
G1 X197.655 Y67.030 E0.04306 ; perimeter
G1 X197.311 Y66.620 E0.02205 ; perimeter
G1 X198.145 Y65.920 E0.04484 ; perimeter
G1 X194.734 Y61.855 E0.21861 ; perimeter
G1 X193.900 Y62.554 E0.04484 ; perimeter
G1 X193.556 Y62.144 E0.02205 ; perimeter
G1 X194.357 Y61.472 E0.04306 ; perimeter
G1 X191.908 Y58.554 E0.15696 ; perimeter
G1 X192.597 Y57.976 E0.03705 ; perimeter
G1 X193.455 Y58.051 E0.03548 ; perimeter
G1 X201.669 Y67.840 E0.52645 ; perimeter
G1 X201.594 Y68.698 E0.03548 ; perimeter
G1 X200.951 Y69.238 E0.03457 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.856 Y69.835 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.407 Y66.916 E0.15696 ; perimeter
G1 X197.606 Y67.588 E0.04306 ; perimeter
G1 X196.753 Y66.571 E0.05471 ; perimeter
G1 X197.586 Y65.871 E0.04484 ; perimeter
G1 X194.685 Y62.413 E0.18596 ; perimeter
G1 X193.851 Y63.113 E0.04484 ; perimeter
G1 X192.998 Y62.095 E0.05471 ; perimeter
G1 X193.798 Y61.424 E0.04306 ; perimeter
G1 X191.349 Y58.505 E0.15696 ; perimeter
G1 X192.468 Y57.567 E0.06014 ; perimeter
G1 X193.653 Y57.670 E0.04901 ; perimeter
G1 X202.078 Y67.711 E0.53998 ; perimeter
G1 X201.974 Y68.896 E0.04901 ; perimeter
G1 X200.902 Y69.796 E0.05767 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.741 Y69.452 F10800.000 ; move inwards before travel
G1 F8640
G1 X198.747 Y67.308 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X160.226 Y76.553 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.882 Y76.143 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.16390 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X187.793 Y57.033 E1.06086 ; perimeter
G1 X188.191 Y56.757 E0.01995 ; perimeter
G1 X188.406 Y56.640 E0.01007 ; perimeter
G1 X188.732 Y56.513 E0.01443 ; perimeter
G1 X189.072 Y56.429 E0.01443 ; perimeter
G1 X189.421 Y56.391 E0.01444 ; perimeter
G1 X189.770 Y56.398 E0.01441 ; perimeter
G1 X190.117 Y56.451 E0.01443 ; perimeter
G1 X190.453 Y56.549 E0.01443 ; perimeter
G1 X190.775 Y56.691 E0.01450 ; perimeter
G1 X191.041 Y56.850 E0.01278 ; perimeter
G1 X191.332 Y57.083 E0.01534 ; perimeter
G1 X190.874 Y57.467 E0.02458 ; perimeter
G1 X190.680 Y57.330 E0.00978 ; perimeter
G1 X190.329 Y57.168 E0.01595 ; perimeter
G1 X189.863 Y57.052 E0.01977 ; perimeter
G1 X189.483 Y57.024 E0.01568 ; perimeter
G1 X189.196 Y57.050 E0.01191 ; perimeter
G1 X188.731 Y57.152 E0.01958 ; perimeter
G1 X188.287 Y57.357 E0.02015 ; perimeter
G1 X187.984 Y57.571 E0.01528 ; perimeter
G1 X168.261 Y74.121 E1.06066 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X160.272 Y76.514 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.177 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.323 Y76.094 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.18617 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X187.553 Y56.717 E1.05567 ; perimeter
G1 X187.983 Y56.419 E0.02156 ; perimeter
G1 X188.238 Y56.280 E0.01198 ; perimeter
G1 X188.613 Y56.134 E0.01657 ; perimeter
G1 X189.003 Y56.038 E0.01657 ; perimeter
G1 X189.403 Y55.994 E0.01657 ; perimeter
G1 X189.540 Y55.997 E0.00564 ; perimeter
G1 X189.805 Y56.003 E0.01092 ; perimeter
G1 X190.202 Y56.064 E0.01657 ; perimeter
G1 X190.588 Y56.176 E0.01656 ; perimeter
G1 X190.957 Y56.338 E0.01659 ; perimeter
G1 X191.265 Y56.522 E0.01476 ; perimeter
G1 X191.543 Y56.736 E0.01447 ; perimeter
G1 X191.911 Y57.115 E0.02174 ; perimeter
G1 X190.884 Y57.976 E0.05521 ; perimeter
G1 X190.482 Y57.675 E0.02071 ; perimeter
G1 X190.197 Y57.544 E0.01293 ; perimeter
G1 X189.800 Y57.444 E0.01683 ; perimeter
G1 X189.487 Y57.422 E0.01295 ; perimeter
G1 X189.256 Y57.442 E0.00956 ; perimeter
G1 X188.858 Y57.530 E0.01676 ; perimeter
G1 X188.486 Y57.701 E0.01688 ; perimeter
G1 X188.227 Y57.885 E0.01310 ; perimeter
G1 X168.405 Y74.517 E1.06593 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X160.223 Y77.073 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.159 Y76.712 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.323 Y76.094 E-0.30695 ; wipe and retract
G1 X160.826 Y74.833 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y139.253 E0.04011 ; perimeter
G1 X83.970 Y139.253 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.04011 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.968 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.857 E0.06321 ; perimeter
G1 X84.366 Y138.857 E0.21040 ; perimeter
G1 X84.366 Y140.391 E0.06321 ; perimeter
G1 X84.010 Y140.747 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.132 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y138.460 E0.08630 ; perimeter
G1 X84.762 Y138.460 E0.24305 ; perimeter
G1 X84.762 Y140.555 E0.08630 ; perimeter
G1 X84.175 Y141.143 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.802 Y140.960 F10800.000 ; move inwards before travel
G1 X83.743 Y140.278 ; move to first infill point
G1 F7168.6
G1 X83.035 Y139.569 E0.05230 ; infill
G1 X82.324 Y139.569 E0.03707 ; infill
G1 X82.832 Y140.077 E0.03747 ; infill
G1 X82.122 Y140.077 E0.03707 ; infill
G1 X81.614 Y139.569 E0.03747 ; infill
G1 X80.904 Y139.569 E0.03707 ; infill
G1 X81.412 Y140.077 E0.03747 ; infill
G1 X80.701 Y140.077 E0.03707 ; infill
G1 X80.194 Y139.569 E0.03747 ; infill
G1 X79.971 Y139.569 E0.01163 ; infill
G1 X79.971 Y140.057 E0.02544 ; infill
G1 X80.192 Y140.278 E0.01631 ; infill
G1 F8640
G1 X79.971 Y140.057 E-0.07217 ; wipe and retract
G1 X79.971 Y139.569 E-0.11255 ; wipe and retract
G1 X80.194 Y139.569 E-0.05143 ; wipe and retract
G1 X80.701 Y140.077 E-0.16576 ; wipe and retract
G1 X81.412 Y140.077 E-0.16399 ; wipe and retract
G1 X80.904 Y139.569 E-0.16576 ; wipe and retract
G1 X81.027 Y139.569 E-0.02834 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X77.203 Y130.238 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X76.672 Y130.284 E0.02196 ; perimeter
G1 X76.413 Y130.067 E0.01396 ; perimeter
G1 X88.166 Y116.060 E0.75325 ; perimeter
G1 X88.425 Y116.278 E0.01396 ; perimeter
G1 X88.472 Y116.809 E0.02195 ; perimeter
G1 X77.242 Y130.192 E0.71973 ; perimeter
M204 S1000 ; adjust acceleration
G1 X77.401 Y130.619 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.543 Y130.694 E0.03548 ; perimeter
G1 X75.854 Y130.116 E0.03705 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X77.619 Y126.622 E0.03682 ; perimeter
G1 X77.963 Y126.212 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.03682 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X84.639 Y118.256 E0.03682 ; perimeter
G1 X84.983 Y117.846 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.03682 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.806 Y116.080 E0.03705 ; perimeter
G1 X88.881 Y116.938 E0.03548 ; perimeter
G1 X77.440 Y130.573 E0.73325 ; perimeter
M204 S1000 ; adjust acceleration
G1 X77.599 Y130.999 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X76.414 Y131.103 E0.04901 ; perimeter
G1 X75.296 Y130.164 E0.06014 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X77.060 Y126.671 E0.03682 ; perimeter
G1 X77.914 Y125.654 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.03682 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X84.081 Y118.305 E0.03682 ; perimeter
G1 X84.934 Y117.287 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.03682 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.186 Y115.881 E0.06014 ; perimeter
G1 X89.290 Y117.067 E0.04901 ; perimeter
G1 X77.638 Y130.953 E0.74678 ; perimeter
M204 S1000 ; adjust acceleration
G1 X77.289 Y130.747 F10800.000 ; move inwards before travel
G1 F8640
G1 X76.414 Y131.103 E-0.28466 ; wipe and retract
G1 X75.296 Y130.164 E-0.33707 ; wipe and retract
G1 X75.681 Y129.706 E-0.13827 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X98.801 Y113.766 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X98.032 Y113.604 E0.03236 ; perimeter
G1 X98.743 Y113.753 E0.02992 ; perimeter
M204 S1000 ; adjust acceleration
G1 X99.197 Y114.250 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.066 Y113.794 E0.08978 ; perimeter
G1 X97.066 Y112.981 E0.03349 ; perimeter
G1 X99.197 Y113.444 E0.08984 ; perimeter
G1 X99.197 Y114.190 E0.03075 ; perimeter
M204 S1000 ; adjust acceleration
G1 X98.818 Y114.125 F10800.000 ; move inwards before travel
G1 F8640
G1 X97.066 Y113.794 E-0.50049 ; wipe and retract
G1 X97.066 Y112.981 E-0.18772 ; wipe and retract
G1 X97.370 Y113.047 E-0.07178 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X89.489 Y114.699 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.15587 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X61.730 Y95.717 E1.06066 ; perimeter
G1 X61.428 Y95.503 E0.01528 ; perimeter
G1 X60.984 Y95.298 E0.02015 ; perimeter
G1 X60.519 Y95.196 E0.01958 ; perimeter
G1 X60.231 Y95.171 E0.01191 ; perimeter
G1 X59.852 Y95.198 E0.01568 ; perimeter
G1 X59.386 Y95.315 E0.01977 ; perimeter
G1 X59.034 Y95.476 E0.01595 ; perimeter
G1 X58.840 Y95.613 E0.00978 ; perimeter
G1 X58.382 Y95.229 E0.02464 ; perimeter
G1 X58.570 Y95.072 E0.01008 ; perimeter
G1 X58.947 Y94.834 E0.01836 ; perimeter
G1 X59.262 Y94.695 E0.01419 ; perimeter
G1 X59.598 Y94.598 E0.01443 ; perimeter
G1 X59.944 Y94.545 E0.01443 ; perimeter
G1 X60.295 Y94.537 E0.01443 ; perimeter
G1 X60.540 Y94.564 E0.01017 ; perimeter
G1 X60.983 Y94.659 E0.01866 ; perimeter
G1 X61.309 Y94.786 E0.01443 ; perimeter
G1 X61.616 Y94.954 E0.01443 ; perimeter
G1 X61.915 Y95.173 E0.01527 ; perimeter
G1 X81.649 Y111.732 E1.06121 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X89.833 Y114.289 E0.16390 ; perimeter
G1 X89.528 Y114.653 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.538 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.16626 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X61.488 Y96.031 E1.06593 ; perimeter
G1 X61.229 Y95.848 E0.01310 ; perimeter
G1 X60.857 Y95.676 E0.01688 ; perimeter
G1 X60.459 Y95.588 E0.01676 ; perimeter
G1 X60.228 Y95.568 E0.00956 ; perimeter
G1 X59.914 Y95.591 E0.01295 ; perimeter
G1 X59.518 Y95.690 E0.01683 ; perimeter
G1 X59.233 Y95.821 E0.01293 ; perimeter
G1 X58.831 Y96.122 E0.02071 ; perimeter
G1 X57.807 Y95.263 E0.05506 ; perimeter
G1 X58.063 Y94.979 E0.01575 ; perimeter
G1 X58.336 Y94.751 E0.01467 ; perimeter
G1 X58.760 Y94.483 E0.02067 ; perimeter
G1 X59.126 Y94.322 E0.01648 ; perimeter
G1 X59.512 Y94.210 E0.01656 ; perimeter
G1 X59.910 Y94.149 E0.01656 ; perimeter
G1 X60.312 Y94.140 E0.01657 ; perimeter
G1 X60.712 Y94.184 E0.01656 ; perimeter
G1 X61.102 Y94.280 E0.01657 ; perimeter
G1 X61.477 Y94.426 E0.01657 ; perimeter
G1 X61.830 Y94.619 E0.01657 ; perimeter
G1 X62.160 Y94.861 E0.01687 ; perimeter
G1 X81.793 Y111.335 E1.05580 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X90.392 Y114.240 E0.18617 ; perimeter
G1 X89.577 Y115.212 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.257 Y114.972 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.024 Y113.134 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X48.761 Y106.864 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.501 Y106.646 E0.01396 ; perimeter
G1 X48.455 Y106.115 E0.02196 ; perimeter
G1 X56.458 Y96.577 E0.51292 ; perimeter
G1 X56.989 Y96.531 E0.02195 ; perimeter
G1 X57.249 Y96.749 E0.01396 ; perimeter
G1 X54.965 Y99.470 E0.14635 ; perimeter
G1 X54.932 Y99.443 E0.00177 ; perimeter
G1 X51.012 Y104.115 E0.25127 ; perimeter
G1 X51.045 Y104.143 E0.00177 ; perimeter
G1 X48.800 Y106.818 E0.14388 ; perimeter
M204 S1000 ; adjust acceleration
G1 X48.810 Y107.422 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.121 Y106.844 E0.03705 ; perimeter
G1 X48.046 Y105.986 E0.03548 ; perimeter
G1 X56.260 Y96.197 E0.52645 ; perimeter
G1 X57.118 Y96.122 E0.03548 ; perimeter
G1 X57.807 Y96.700 E0.03705 ; perimeter
G1 X55.358 Y99.619 E0.15696 ; perimeter
G1 X56.159 Y100.290 E0.04306 ; perimeter
G1 X55.815 Y100.701 E0.02205 ; perimeter
G1 X54.981 Y100.001 E0.04484 ; perimeter
G1 X51.570 Y104.066 E0.21861 ; perimeter
G1 X52.404 Y104.766 E0.04484 ; perimeter
G1 X52.060 Y105.176 E0.02205 ; perimeter
G1 X51.259 Y104.504 E0.04306 ; perimeter
G1 X48.848 Y107.377 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X48.859 Y107.981 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X47.740 Y107.043 E0.06014 ; perimeter
G1 X47.637 Y105.857 E0.04901 ; perimeter
G1 X56.062 Y95.816 E0.53998 ; perimeter
G1 X57.247 Y95.713 E0.04901 ; perimeter
G1 X58.365 Y96.651 E0.06014 ; perimeter
G1 X55.916 Y99.570 E0.15696 ; perimeter
G1 X56.717 Y100.242 E0.04306 ; perimeter
G1 X55.864 Y101.259 E0.05471 ; perimeter
G1 X55.030 Y100.559 E0.04484 ; perimeter
G1 X52.128 Y104.017 E0.18596 ; perimeter
G1 X52.962 Y104.717 E0.04484 ; perimeter
G1 X52.108 Y105.734 E0.05471 ; perimeter
G1 X51.308 Y105.062 E0.04306 ; perimeter
G1 X48.897 Y107.935 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X48.756 Y107.594 F10800.000 ; move inwards before travel
G1 F8640
G1 X47.740 Y107.043 E-0.33736 ; wipe and retract
G1 X47.637 Y105.857 E-0.27469 ; wipe and retract
G1 X48.049 Y105.367 E-0.14795 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X74.894 Y136.604 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q93 S9
M204 S800 ; adjust acceleration
G1 F4800
G1 X46.877 Y113.096 E1.50666 ; perimeter
G1 X46.604 Y112.833 E0.01564 ; perimeter
G1 X46.380 Y112.550 E0.01485 ; perimeter
G1 X46.195 Y112.239 E0.01490 ; perimeter
G1 X46.054 Y111.905 E0.01494 ; perimeter
G1 X45.957 Y111.547 E0.01530 ; perimeter
G1 X45.925 Y111.340 E0.00861 ; perimeter
G1 X45.907 Y110.972 E0.01519 ; perimeter
G1 X45.939 Y110.612 E0.01487 ; perimeter
G1 X46.019 Y110.259 E0.01491 ; perimeter
G1 X46.146 Y109.920 E0.01494 ; perimeter
G1 X46.318 Y109.600 E0.01496 ; perimeter
G1 X46.545 Y109.289 E0.01584 ; perimeter
G1 X47.438 Y108.225 E0.05724 ; perimeter
G1 X47.848 Y108.569 E0.02205 ; perimeter
G1 X47.087 Y109.476 E0.04877 ; perimeter
G1 X46.862 Y109.796 E0.01612 ; perimeter
G1 X46.685 Y110.176 E0.01725 ; perimeter
G1 X46.577 Y110.580 E0.01725 ; perimeter
G1 X46.541 Y110.997 E0.01725 ; perimeter
G1 X46.577 Y111.414 E0.01725 ; perimeter
G1 X46.685 Y111.819 E0.01725 ; perimeter
G1 X46.862 Y112.198 E0.01725 ; perimeter
G1 X47.102 Y112.541 E0.01725 ; perimeter
G1 X47.379 Y112.818 E0.01612 ; perimeter
G1 X75.238 Y136.194 E1.49817 ; perimeter
G1 X74.933 Y136.558 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X74.943 Y137.163 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.612 Y113.391 E1.52353 ; perimeter
G1 X46.310 Y113.100 E0.01729 ; perimeter
G1 X46.052 Y112.776 E0.01705 ; perimeter
G1 X45.840 Y112.419 E0.01711 ; perimeter
G1 X45.678 Y112.035 E0.01717 ; perimeter
G1 X45.568 Y111.629 E0.01732 ; perimeter
G1 X45.530 Y111.380 E0.01038 ; perimeter
G1 X45.510 Y110.964 E0.01716 ; perimeter
G1 X45.546 Y110.551 E0.01708 ; perimeter
G1 X45.638 Y110.145 E0.01712 ; perimeter
G1 X45.784 Y109.755 E0.01716 ; perimeter
G1 X45.982 Y109.388 E0.01718 ; perimeter
G1 X46.232 Y109.045 E0.01750 ; perimeter
G1 X47.389 Y107.667 E0.07413 ; perimeter
G1 X48.406 Y108.520 E0.05471 ; perimeter
G1 X47.402 Y109.717 E0.06438 ; perimeter
G1 X47.207 Y109.995 E0.01398 ; perimeter
G1 X47.059 Y110.312 E0.01439 ; perimeter
G1 X46.969 Y110.649 E0.01439 ; perimeter
G1 X46.938 Y110.997 E0.01439 ; perimeter
G1 X46.969 Y111.345 E0.01439 ; perimeter
G1 X47.059 Y111.683 E0.01439 ; perimeter
G1 X47.207 Y111.999 E0.01439 ; perimeter
G1 X47.407 Y112.285 E0.01439 ; perimeter
G1 X47.647 Y112.525 E0.01398 ; perimeter
G1 X75.796 Y136.145 E1.51378 ; perimeter
M73 P93 R8
G1 X74.981 Y137.117 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X74.640 Y136.902 F10800.000 ; move inwards before travel
G1 F8640
G1 X72.457 Y135.005 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X150.629 Y113.766 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X151.397 Y113.604 E0.03236 ; perimeter
G1 X150.687 Y113.755 E0.02989 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.232 Y114.250 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.232 Y113.444 E0.03322 ; perimeter
G1 X152.363 Y112.981 E0.08984 ; perimeter
G1 X152.363 Y113.794 E0.03350 ; perimeter
G1 X150.291 Y114.238 E0.08731 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.367 Y113.874 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.232 Y113.444 E-0.18400 ; wipe and retract
G1 X152.363 Y112.981 E-0.50354 ; wipe and retract
G1 X152.363 Y113.295 E-0.07246 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X172.226 Y130.238 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X160.958 Y116.809 E0.72220 ; perimeter
G1 X161.004 Y116.278 E0.02195 ; perimeter
G1 X161.264 Y116.060 E0.01396 ; perimeter
G1 X173.017 Y130.067 E0.75325 ; perimeter
G1 X172.757 Y130.284 E0.01396 ; perimeter
G1 X172.286 Y130.243 E0.01948 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.028 Y130.619 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.549 Y116.938 E0.73573 ; perimeter
G1 X160.624 Y116.080 E0.03548 ; perimeter
G1 X161.313 Y115.502 E0.03705 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X164.446 Y117.846 E0.03682 ; perimeter
G1 X164.790 Y118.256 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.03682 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X171.467 Y126.212 E0.03682 ; perimeter
G1 X171.811 Y126.622 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.03682 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X172.886 Y130.694 E0.03705 ; perimeter
G1 X172.088 Y130.624 E0.03301 ; perimeter
M204 S1000 ; adjust acceleration
G1 X171.830 Y130.999 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.139 Y117.067 E0.74925 ; perimeter
G1 X160.243 Y115.881 E0.04901 ; perimeter
G1 X161.361 Y114.943 E0.06014 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X164.495 Y117.287 E0.03682 ; perimeter
G1 X165.349 Y118.305 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.03682 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X171.516 Y125.654 E0.03682 ; perimeter
G1 X172.369 Y126.671 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.03682 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.015 Y131.103 E0.06014 ; perimeter
G1 X171.890 Y131.004 E0.04654 ; perimeter
M204 S1000 ; adjust acceleration
G1 X171.807 Y130.600 F10800.000 ; move inwards before travel
G1 F8640
G1 X169.768 Y128.488 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y139.253 E0.04011 ; perimeter
G1 X169.775 Y139.253 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.04011 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.462 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.857 E0.06321 ; perimeter
G1 X170.171 Y138.857 E0.21040 ; perimeter
G1 X170.171 Y140.391 E0.06321 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.522 Y140.789 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.298 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y138.460 E0.08630 ; perimeter
G1 X170.567 Y138.460 E0.24306 ; perimeter
G1 X170.567 Y140.555 E0.08630 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.358 Y141.185 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.282 Y140.786 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.667 Y140.555 E-0.21581 ; wipe and retract
G1 X164.667 Y138.460 E-0.48370 ; wipe and retract
G1 X164.929 Y138.460 E-0.06049 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X165.997 Y140.278 ; move to first infill point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7168.59
G1 X165.776 Y140.057 E0.01631 ; infill
G1 X165.776 Y139.569 E0.02544 ; infill
G1 X165.999 Y139.569 E0.01163 ; infill
G1 X166.506 Y140.077 E0.03747 ; infill
G1 X167.217 Y140.077 E0.03707 ; infill
G1 X166.709 Y139.569 E0.03747 ; infill
G1 X167.419 Y139.569 E0.03707 ; infill
G1 X167.927 Y140.077 E0.03747 ; infill
G1 X168.637 Y140.077 E0.03707 ; infill
G1 X168.129 Y139.569 E0.03747 ; infill
G1 X168.840 Y139.569 E0.03707 ; infill
G1 X169.548 Y140.278 E0.05230 ; infill
G1 F8640
G1 X168.840 Y139.569 E-0.23135 ; wipe and retract
G1 X168.129 Y139.569 E-0.16399 ; wipe and retract
G1 X168.637 Y140.077 E-0.16576 ; wipe and retract
G1 X167.927 Y140.077 E-0.16399 ; wipe and retract
G1 X167.820 Y139.970 E-0.03492 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X174.536 Y136.604 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X174.192 Y136.194 E0.02205 ; perimeter
G1 X202.050 Y112.818 E1.49817 ; perimeter
G1 X202.327 Y112.541 E0.01613 ; perimeter
G1 X202.567 Y112.198 E0.01725 ; perimeter
G1 X202.744 Y111.819 E0.01725 ; perimeter
G1 X202.853 Y111.414 E0.01725 ; perimeter
G1 X202.889 Y110.997 E0.01725 ; perimeter
G1 X202.853 Y110.580 E0.01725 ; perimeter
G1 X202.744 Y110.176 E0.01725 ; perimeter
G1 X202.567 Y109.796 E0.01725 ; perimeter
G1 X202.343 Y109.476 E0.01612 ; perimeter
G1 X201.582 Y108.569 E0.04877 ; perimeter
G1 X201.992 Y108.225 E0.02205 ; perimeter
G1 X202.885 Y109.289 E0.05724 ; perimeter
G1 X203.112 Y109.600 E0.01584 ; perimeter
G1 X203.286 Y109.923 E0.01512 ; perimeter
G1 X203.362 Y110.120 E0.00873 ; perimeter
G1 X203.491 Y110.612 E0.02093 ; perimeter
G1 X203.522 Y110.972 E0.01487 ; perimeter
G1 X203.505 Y111.340 E0.01519 ; perimeter
G1 X203.473 Y111.547 E0.00861 ; perimeter
G1 X203.376 Y111.905 E0.01530 ; perimeter
G1 X203.182 Y112.334 E0.01940 ; perimeter
G1 X203.052 Y112.548 E0.01030 ; perimeter
G1 X202.826 Y112.833 E0.01497 ; perimeter
G1 X202.552 Y113.096 E0.01564 ; perimeter
G1 X174.582 Y136.566 E1.50418 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.487 Y137.163 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X173.633 Y136.145 E0.05471 ; perimeter
G1 X201.782 Y112.525 E1.51378 ; perimeter
G1 X202.022 Y112.285 E0.01398 ; perimeter
G1 X202.223 Y111.999 E0.01439 ; perimeter
G1 X202.370 Y111.683 E0.01439 ; perimeter
G1 X202.461 Y111.345 E0.01439 ; perimeter
G1 X202.491 Y110.997 E0.01439 ; perimeter
G1 X202.461 Y110.649 E0.01439 ; perimeter
G1 X202.370 Y110.312 E0.01439 ; perimeter
G1 X202.223 Y109.995 E0.01439 ; perimeter
G1 X202.028 Y109.717 E0.01398 ; perimeter
G1 X201.024 Y108.520 E0.06438 ; perimeter
G1 X202.041 Y107.667 E0.05471 ; perimeter
G1 X203.197 Y109.045 E0.07413 ; perimeter
G1 X203.448 Y109.388 E0.01750 ; perimeter
G1 X203.646 Y109.757 E0.01724 ; perimeter
G1 X203.734 Y109.982 E0.00998 ; perimeter
G1 X203.791 Y110.143 E0.00704 ; perimeter
G1 X203.883 Y110.551 E0.01720 ; perimeter
G1 X203.920 Y110.964 E0.01708 ; perimeter
G1 X203.900 Y111.380 E0.01716 ; perimeter
G1 X203.861 Y111.629 E0.01038 ; perimeter
G1 X203.752 Y112.035 E0.01732 ; perimeter
G1 X203.524 Y112.535 E0.02264 ; perimeter
G1 X203.378 Y112.775 E0.01157 ; perimeter
G1 X203.120 Y113.100 E0.01710 ; perimeter
G1 X202.817 Y113.391 E0.01729 ; perimeter
G1 X174.533 Y137.124 E1.52106 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.417 Y136.769 F10800.000 ; move inwards before travel
G1 F8640
G1 X173.633 Y136.145 E-0.30695 ; wipe and retract
G1 X175.136 Y134.884 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X200.669 Y106.864 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.385 Y104.143 E0.14635 ; perimeter
G1 X198.418 Y104.115 E0.00177 ; perimeter
G1 X194.497 Y99.443 E0.25127 ; perimeter
G1 X194.464 Y99.470 E0.00177 ; perimeter
G1 X192.181 Y96.749 E0.14635 ; perimeter
G1 X192.440 Y96.531 E0.01396 ; perimeter
G1 X192.971 Y96.577 E0.02195 ; perimeter
G1 X200.975 Y106.115 E0.51292 ; perimeter
G1 X200.928 Y106.646 E0.02195 ; perimeter
G1 X200.715 Y106.826 E0.01148 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.620 Y107.422 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.171 Y104.504 E0.15696 ; perimeter
G1 X197.370 Y105.176 E0.04306 ; perimeter
G1 X197.026 Y104.766 E0.02205 ; perimeter
G1 X197.860 Y104.066 E0.04484 ; perimeter
G1 X194.449 Y100.001 E0.21861 ; perimeter
G1 X193.615 Y100.701 E0.04484 ; perimeter
G1 X193.271 Y100.290 E0.02205 ; perimeter
G1 X194.072 Y99.619 E0.04306 ; perimeter
G1 X191.623 Y96.700 E0.15696 ; perimeter
G1 X192.311 Y96.122 E0.03705 ; perimeter
G1 X193.169 Y96.197 E0.03548 ; perimeter
G1 X201.384 Y105.986 E0.52645 ; perimeter
G1 X201.309 Y106.844 E0.03548 ; perimeter
G1 X200.666 Y107.384 E0.03457 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.571 Y107.981 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.122 Y105.062 E0.15696 ; perimeter
G1 X197.321 Y105.734 E0.04306 ; perimeter
G1 X196.468 Y104.717 E0.05471 ; perimeter
G1 X197.301 Y104.017 E0.04484 ; perimeter
G1 X194.400 Y100.559 E0.18596 ; perimeter
G1 X193.566 Y101.259 E0.04484 ; perimeter
G1 X192.712 Y100.242 E0.05471 ; perimeter
G1 X193.513 Y99.570 E0.04306 ; perimeter
G1 X191.064 Y96.651 E0.15696 ; perimeter
G1 X192.182 Y95.713 E0.06014 ; perimeter
G1 X193.368 Y95.816 E0.04901 ; perimeter
G1 X201.793 Y105.857 E0.53998 ; perimeter
G1 X201.689 Y107.043 E0.04901 ; perimeter
G1 X200.617 Y107.942 E0.05767 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.456 Y107.598 F10800.000 ; move inwards before travel
G1 F8640
G1 X198.462 Y105.455 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
G1 X159.940 Y114.699 ; move to first perimeter point
G1 Z21.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.596 Y114.289 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.16390 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X187.508 Y95.179 E1.06086 ; perimeter
G1 X187.906 Y94.903 E0.01995 ; perimeter
G1 X188.120 Y94.786 E0.01007 ; perimeter
G1 X188.447 Y94.659 E0.01443 ; perimeter
G1 X188.787 Y94.575 E0.01443 ; perimeter
G1 X189.135 Y94.537 E0.01444 ; perimeter
G1 X189.485 Y94.545 E0.01441 ; perimeter
G1 X189.831 Y94.598 E0.01443 ; perimeter
G1 X190.168 Y94.695 E0.01443 ; perimeter
G1 X190.490 Y94.837 E0.01450 ; perimeter
G1 X190.756 Y94.996 E0.01278 ; perimeter
G1 X191.046 Y95.230 E0.01534 ; perimeter
G1 X190.589 Y95.613 E0.02458 ; perimeter
G1 X190.395 Y95.476 E0.00978 ; perimeter
G1 X190.044 Y95.315 E0.01595 ; perimeter
G1 X189.578 Y95.198 E0.01977 ; perimeter
G1 X189.198 Y95.171 E0.01568 ; perimeter
G1 X188.910 Y95.196 E0.01191 ; perimeter
G1 X188.446 Y95.298 E0.01958 ; perimeter
G1 X188.002 Y95.503 E0.02015 ; perimeter
G1 X187.699 Y95.717 E0.01528 ; perimeter
G1 X167.976 Y112.267 E1.06066 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.986 Y114.661 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.892 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.038 Y114.240 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.18617 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X187.267 Y94.863 E1.05567 ; perimeter
G1 X187.698 Y94.566 E0.02156 ; perimeter
G1 X187.953 Y94.426 E0.01198 ; perimeter
G1 X188.327 Y94.280 E0.01657 ; perimeter
G1 X188.718 Y94.184 E0.01657 ; perimeter
G1 X189.118 Y94.140 E0.01657 ; perimeter
G1 X189.255 Y94.143 E0.00564 ; perimeter
G1 X189.520 Y94.149 E0.01092 ; perimeter
G1 X189.917 Y94.210 E0.01657 ; perimeter
G1 X190.303 Y94.322 E0.01656 ; perimeter
G1 X190.672 Y94.484 E0.01659 ; perimeter
G1 X190.980 Y94.668 E0.01476 ; perimeter
G1 X191.258 Y94.882 E0.01447 ; perimeter
G1 X191.626 Y95.261 E0.02174 ; perimeter
G1 X190.599 Y96.122 E0.05521 ; perimeter
G1 X190.197 Y95.821 E0.02071 ; perimeter
G1 X189.911 Y95.690 E0.01293 ; perimeter
G1 X189.515 Y95.591 E0.01683 ; perimeter
G1 X189.202 Y95.568 E0.01295 ; perimeter
G1 X188.970 Y95.588 E0.00956 ; perimeter
G1 X188.573 Y95.676 E0.01676 ; perimeter
G1 X188.201 Y95.848 E0.01688 ; perimeter
G1 X187.941 Y96.031 E0.01310 ; perimeter
G1 X168.120 Y112.663 E1.06593 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X159.938 Y115.219 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.874 Y114.858 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;21.5


G1 F8640
G1 X159.038 Y114.240 E-0.30695 ; wipe and retract
G1 X160.541 Y112.979 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z21.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;21.5
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y101.226 E0.03520 ; perimeter
G1 X84.255 Y101.226 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.03520 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.253 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.830 E0.05829 ; perimeter
G1 X84.651 Y100.830 E0.21040 ; perimeter
G1 X84.651 Y102.245 E0.05829 ; perimeter
G1 X84.296 Y102.600 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.417 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y100.434 E0.08138 ; perimeter
G1 X85.047 Y100.434 E0.24305 ; perimeter
G1 X85.047 Y102.409 E0.08138 ; perimeter
G1 X84.460 Y102.997 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.088 Y102.813 F10800.000 ; move inwards before travel
G1 F8640
G1 X81.168 Y103.027 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X83.726 Y102.131 ; move to first infill point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7344.92
G1 X83.939 Y101.919 E0.01532 ; infill
G1 X83.939 Y101.542 E0.01918 ; infill
G1 X83.622 Y101.542 E0.01613 ; infill
G1 X83.234 Y101.931 E0.02797 ; infill
G1 X82.541 Y101.931 E0.03531 ; infill
G1 X82.929 Y101.542 E0.02797 ; infill
G1 X82.236 Y101.542 E0.03531 ; infill
G1 X81.848 Y101.931 E0.02797 ; infill
G1 X81.154 Y101.931 E0.03531 ; infill
G1 X81.543 Y101.542 E0.02797 ; infill
G1 X80.849 Y101.542 E0.03531 ; infill
G1 X80.260 Y102.131 E0.04244 ; infill
G1 F8640
G1 X80.849 Y101.542 E-0.19238 ; wipe and retract
G1 X81.543 Y101.542 E-0.16005 ; wipe and retract
G1 X81.154 Y101.931 E-0.12679 ; wipe and retract
G1 X81.848 Y101.931 E-0.16005 ; wipe and retract
G1 X82.217 Y101.561 E-0.12073 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X77.136 Y92.123 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X76.957 Y92.138 E0.00739 ; perimeter
G1 X76.698 Y91.921 E0.01396 ; perimeter
G1 X88.451 Y77.914 E0.75325 ; perimeter
G1 X88.711 Y78.132 E0.01396 ; perimeter
G1 X88.726 Y78.310 E0.00739 ; perimeter
G1 X77.175 Y92.077 E0.74032 ; perimeter
M204 S1000 ; adjust acceleration
G1 X77.334 Y92.503 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.828 Y92.547 E0.02092 ; perimeter
G1 X76.140 Y91.969 E0.03705 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X77.966 Y88.528 E0.03348 ; perimeter
G1 X78.310 Y88.118 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.03348 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X84.987 Y80.162 E0.03348 ; perimeter
G1 X85.331 Y79.752 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.03348 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X89.091 Y77.933 E0.03705 ; perimeter
G1 X89.135 Y78.439 E0.02092 ; perimeter
G1 X77.373 Y92.457 E0.75385 ; perimeter
M204 S1000 ; adjust acceleration
G1 X77.532 Y92.884 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X76.699 Y92.957 E0.03444 ; perimeter
G1 X75.581 Y92.018 E0.06014 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X77.408 Y88.577 E0.03348 ; perimeter
G1 X78.261 Y87.560 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.03348 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X84.428 Y80.211 E0.03348 ; perimeter
G1 X85.282 Y79.193 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.03348 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.472 Y77.735 E0.06014 ; perimeter
G1 X89.545 Y78.568 E0.03444 ; perimeter
G1 X77.571 Y92.838 E0.76738 ; perimeter
M204 S1000 ; adjust acceleration
G1 X77.223 Y92.630 F10800.000 ; move inwards before travel
G1 F8640
G1 X76.699 Y92.957 E-0.20309 ; wipe and retract
G1 X75.581 Y92.018 E-0.33707 ; wipe and retract
G1 X76.193 Y91.289 E-0.21984 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X99.233 Y75.905 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.604 Y75.557 E0.06863 ; perimeter
G1 X97.608 Y75.148 E0.01682 ; perimeter
G1 X99.233 Y75.502 E0.06849 ; perimeter
G1 X99.233 Y75.845 E0.01415 ; perimeter
M204 S1000 ; adjust acceleration
G1 X98.849 Y75.792 F10800.000 ; move inwards before travel
G1 F8640
G1 X97.604 Y75.557 E-0.38199 ; wipe and retract
G1 X97.608 Y75.148 E-0.09429 ; wipe and retract
G1 X98.809 Y75.410 E-0.28372 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X89.774 Y76.553 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.15587 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X62.016 Y57.571 E1.06065 ; perimeter
G1 X61.717 Y57.359 E0.01511 ; perimeter
G1 X61.261 Y57.149 E0.02068 ; perimeter
G1 X60.787 Y57.048 E0.01998 ; perimeter
G1 X60.520 Y57.025 E0.01100 ; perimeter
G1 X60.146 Y57.050 E0.01545 ; perimeter
G1 X59.671 Y57.168 E0.02017 ; perimeter
G1 X59.324 Y57.328 E0.01575 ; perimeter
G1 X59.126 Y57.467 E0.00997 ; perimeter
G1 X58.667 Y57.083 E0.02466 ; perimeter
G1 X58.846 Y56.933 E0.00959 ; perimeter
G1 X59.233 Y56.687 E0.01888 ; perimeter
G1 X59.547 Y56.549 E0.01416 ; perimeter
G1 X59.884 Y56.451 E0.01442 ; perimeter
G1 X60.230 Y56.398 E0.01443 ; perimeter
G1 X60.580 Y56.391 E0.01443 ; perimeter
G1 X60.799 Y56.415 E0.00909 ; perimeter
G1 X61.268 Y56.513 E0.01973 ; perimeter
G1 X61.594 Y56.640 E0.01443 ; perimeter
G1 X61.901 Y56.808 E0.01443 ; perimeter
G1 X62.200 Y57.027 E0.01527 ; perimeter
G1 X81.934 Y73.586 E1.06121 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.118 Y76.143 E0.16390 ; perimeter
G1 X89.813 Y76.507 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.823 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.16626 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X61.773 Y57.885 E1.06593 ; perimeter
G1 X61.518 Y57.704 E0.01293 ; perimeter
G1 X61.135 Y57.527 E0.01735 ; perimeter
G1 X60.728 Y57.441 E0.01716 ; perimeter
G1 X60.517 Y57.422 E0.00873 ; perimeter
G1 X60.208 Y57.443 E0.01273 ; perimeter
G1 X59.803 Y57.544 E0.01721 ; perimeter
G1 X59.522 Y57.673 E0.01271 ; perimeter
G1 X59.116 Y57.976 E0.02090 ; perimeter
G1 X58.092 Y57.117 E0.05506 ; perimeter
G1 X58.343 Y56.838 E0.01548 ; perimeter
G1 X58.611 Y56.612 E0.01442 ; perimeter
G1 X59.046 Y56.336 E0.02122 ; perimeter
G1 X59.412 Y56.176 E0.01647 ; perimeter
G1 X59.798 Y56.064 E0.01656 ; perimeter
G1 X60.195 Y56.003 E0.01656 ; perimeter
G1 X60.597 Y55.994 E0.01657 ; perimeter
G1 X60.997 Y56.038 E0.01656 ; perimeter
G1 X61.388 Y56.134 E0.01657 ; perimeter
G1 X61.762 Y56.280 E0.01657 ; perimeter
G1 X62.115 Y56.473 E0.01657 ; perimeter
G1 X62.445 Y56.715 E0.01687 ; perimeter
G1 X82.078 Y73.189 E1.05580 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X90.677 Y76.094 E0.18617 ; perimeter
G1 X89.862 Y77.065 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.543 Y76.826 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.309 Y74.987 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X49.046 Y68.718 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.787 Y68.500 E0.01396 ; perimeter
G1 X48.771 Y68.321 E0.00739 ; perimeter
G1 X57.096 Y58.401 E0.53352 ; perimeter
G1 X57.274 Y58.385 E0.00739 ; perimeter
G1 X57.534 Y58.603 E0.01396 ; perimeter
G1 X55.250 Y61.324 E0.14635 ; perimeter
G1 X55.026 Y61.136 E0.01207 ; perimeter
G1 X51.105 Y65.808 E0.25127 ; perimeter
G1 X51.330 Y65.996 E0.01207 ; perimeter
G1 X49.085 Y68.672 E0.14388 ; perimeter
M204 S1000 ; adjust acceleration
G1 X49.095 Y69.276 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.406 Y68.698 E0.03705 ; perimeter
G1 X48.362 Y68.192 E0.02092 ; perimeter
G1 X56.898 Y58.020 E0.54705 ; perimeter
G1 X57.403 Y57.976 E0.02092 ; perimeter
G1 X58.092 Y58.554 E0.03705 ; perimeter
G1 X55.643 Y61.472 E0.15696 ; perimeter
G1 X56.168 Y61.913 E0.02823 ; perimeter
G1 X55.824 Y62.323 E0.02205 ; perimeter
G1 X55.075 Y61.694 E0.04030 ; perimeter
G1 X51.664 Y65.759 E0.21861 ; perimeter
G1 X52.413 Y66.388 E0.04030 ; perimeter
G1 X52.069 Y66.798 E0.02205 ; perimeter
G1 X51.544 Y66.358 E0.02823 ; perimeter
G1 X49.134 Y69.230 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X49.144 Y69.835 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.026 Y68.896 E0.06014 ; perimeter
G1 X47.953 Y68.063 E0.03444 ; perimeter
G1 X56.699 Y57.639 E0.56058 ; perimeter
G1 X57.532 Y57.567 E0.03444 ; perimeter
G1 X58.651 Y58.505 E0.06014 ; perimeter
G1 X56.202 Y61.424 E0.15696 ; perimeter
G1 X56.727 Y61.864 E0.02823 ; perimeter
G1 X55.873 Y62.881 E0.05471 ; perimeter
G1 X55.124 Y62.253 E0.04030 ; perimeter
G1 X52.222 Y65.710 E0.18596 ; perimeter
G1 X52.971 Y66.339 E0.04030 ; perimeter
G1 X52.118 Y67.357 E0.05471 ; perimeter
G1 X51.593 Y66.916 E0.02823 ; perimeter
G1 X49.182 Y69.789 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X49.030 Y69.451 F10800.000 ; move inwards before travel
G1 F8640
G1 X48.026 Y68.896 E-0.33736 ; wipe and retract
G1 X47.953 Y68.063 E-0.19305 ; wipe and retract
G1 X48.592 Y67.302 E-0.22959 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X74.988 Y98.297 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.163 Y74.949 E1.49635 ; perimeter
G1 X46.887 Y74.685 E0.01573 ; perimeter
G1 X46.662 Y74.401 E0.01493 ; perimeter
G1 X46.477 Y74.088 E0.01498 ; perimeter
G1 X46.336 Y73.752 E0.01502 ; perimeter
G1 X46.240 Y73.390 E0.01542 ; perimeter
G1 X46.211 Y73.206 E0.00767 ; perimeter
G1 X46.192 Y72.834 E0.01533 ; perimeter
G1 X46.223 Y72.473 E0.01495 ; perimeter
G1 X46.302 Y72.118 E0.01498 ; perimeter
G1 X46.430 Y71.777 E0.01501 ; perimeter
G1 X46.602 Y71.455 E0.01503 ; perimeter
G1 X46.830 Y71.143 E0.01591 ; perimeter
G1 X47.723 Y70.079 E0.05724 ; perimeter
G1 X48.133 Y70.423 E0.02205 ; perimeter
G1 X47.372 Y71.330 E0.04877 ; perimeter
G1 X47.148 Y71.650 E0.01612 ; perimeter
G1 X46.971 Y72.030 E0.01725 ; perimeter
G1 X46.862 Y72.434 E0.01725 ; perimeter
G1 X46.826 Y72.851 E0.01725 ; perimeter
G1 X46.862 Y73.268 E0.01725 ; perimeter
G1 X46.971 Y73.673 E0.01725 ; perimeter
G1 X47.148 Y74.052 E0.01725 ; perimeter
G1 X47.388 Y74.395 E0.01725 ; perimeter
G1 X47.664 Y74.672 E0.01612 ; perimeter
G1 X75.332 Y97.887 E1.48787 ; perimeter
G1 X75.026 Y98.251 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X75.036 Y98.856 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.898 Y75.244 E1.51323 ; perimeter
G1 X46.593 Y74.952 E0.01739 ; perimeter
G1 X46.335 Y74.626 E0.01714 ; perimeter
G1 X46.122 Y74.266 E0.01720 ; perimeter
G1 X45.960 Y73.880 E0.01725 ; perimeter
G1 X45.851 Y73.472 E0.01742 ; perimeter
G1 X45.817 Y73.247 E0.00938 ; perimeter
G1 X45.795 Y72.828 E0.01727 ; perimeter
G1 X45.830 Y72.413 E0.01717 ; perimeter
G1 X45.921 Y72.005 E0.01721 ; perimeter
G1 X46.068 Y71.613 E0.01724 ; perimeter
G1 X46.266 Y71.244 E0.01726 ; perimeter
G1 X46.517 Y70.899 E0.01759 ; perimeter
G1 X47.674 Y69.520 E0.07412 ; perimeter
G1 X48.691 Y70.374 E0.05471 ; perimeter
G1 X47.687 Y71.571 E0.06438 ; perimeter
G1 X47.492 Y71.849 E0.01398 ; perimeter
G1 X47.344 Y72.166 E0.01439 ; perimeter
G1 X47.254 Y72.503 E0.01439 ; perimeter
G1 X47.224 Y72.851 E0.01439 ; perimeter
G1 X47.254 Y73.199 E0.01439 ; perimeter
G1 X47.344 Y73.537 E0.01439 ; perimeter
G1 X47.492 Y73.853 E0.01439 ; perimeter
G1 X47.692 Y74.139 E0.01439 ; perimeter
G1 X47.932 Y74.379 E0.01398 ; perimeter
G1 X75.890 Y97.839 E1.50349 ; perimeter
G1 X75.075 Y98.810 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X74.733 Y98.595 F10800.000 ; move inwards before travel
G1 F8640
G1 X72.550 Y96.698 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X150.767 Y75.905 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.767 Y75.502 E0.01662 ; perimeter
G1 X152.398 Y75.147 E0.06876 ; perimeter
G1 X152.398 Y75.556 E0.01687 ; perimeter
G1 X150.826 Y75.893 E0.06624 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.915 Y75.534 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.767 Y75.502 E-0.09127 ; wipe and retract
G1 X152.398 Y75.147 E-0.38542 ; wipe and retract
G1 X152.398 Y75.556 E-0.09457 ; wipe and retract
G1 X151.599 Y75.727 E-0.18873 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X172.864 Y92.123 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X161.274 Y78.310 E0.74280 ; perimeter
G1 X161.289 Y78.132 E0.00739 ; perimeter
G1 X161.549 Y77.914 E0.01396 ; perimeter
G1 X173.302 Y91.921 E0.75325 ; perimeter
G1 X173.043 Y92.138 E0.01396 ; perimeter
G1 X172.924 Y92.128 E0.00492 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.666 Y92.503 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.865 Y78.439 E0.75632 ; perimeter
G1 X160.909 Y77.933 E0.02092 ; perimeter
G1 X161.598 Y77.355 E0.03705 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X164.669 Y79.752 E0.03348 ; perimeter
G1 X165.013 Y80.162 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.03348 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X171.690 Y88.118 E0.03348 ; perimeter
G1 X172.034 Y88.528 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.03348 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.172 Y92.547 E0.03705 ; perimeter
G1 X172.725 Y92.508 E0.01845 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.468 Y92.884 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.455 Y78.568 E0.76985 ; perimeter
G1 X160.528 Y77.735 E0.03444 ; perimeter
G1 X161.647 Y76.797 E0.06014 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X164.718 Y79.193 E0.03348 ; perimeter
G1 X165.572 Y80.211 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.03348 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X171.739 Y87.560 E0.03348 ; perimeter
G1 X172.592 Y88.577 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.03348 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.301 Y92.957 E0.06014 ; perimeter
G1 X172.527 Y92.889 E0.03197 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.435 Y92.485 F10800.000 ; move inwards before travel
G1 F8640
G1 X170.406 Y90.372 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y101.226 E0.03520 ; perimeter
G1 X170.060 Y101.226 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.03520 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.747 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.830 E0.05829 ; perimeter
G1 X170.456 Y100.830 E0.21040 ; perimeter
G1 X170.456 Y102.245 E0.05829 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.807 Y102.643 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.583 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y100.434 E0.08138 ; perimeter
G1 X170.853 Y100.434 E0.24306 ; perimeter
G1 X170.853 Y102.409 E0.08138 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.643 Y103.039 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.567 Y102.640 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.953 Y102.409 E-0.21581 ; wipe and retract
G1 X164.953 Y100.434 E-0.45614 ; wipe and retract
G1 X165.334 Y100.434 E-0.08805 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X166.065 Y102.131 ; move to first infill point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7344.9
G1 X166.655 Y101.542 E0.04244 ; infill
G1 X167.348 Y101.542 E0.03531 ; infill
G1 X166.959 Y101.931 E0.02797 ; infill
G1 X167.653 Y101.931 E0.03531 ; infill
G1 X168.041 Y101.542 E0.02797 ; infill
G1 X168.734 Y101.542 E0.03531 ; infill
G1 X168.346 Y101.931 E0.02797 ; infill
G1 X169.039 Y101.931 E0.03531 ; infill
G1 X169.427 Y101.542 E0.02797 ; infill
G1 X169.744 Y101.542 E0.01613 ; infill
G1 X169.744 Y101.919 E0.01918 ; infill
G1 X169.531 Y102.131 E0.01532 ; infill
G1 F8640
G1 X169.744 Y101.919 E-0.06943 ; wipe and retract
G1 X169.744 Y101.542 E-0.08693 ; wipe and retract
G1 X169.427 Y101.542 E-0.07312 ; wipe and retract
G1 X169.039 Y101.931 E-0.12679 ; wipe and retract
G1 X168.346 Y101.931 E-0.16005 ; wipe and retract
G1 X168.734 Y101.542 E-0.12679 ; wipe and retract
G1 X168.228 Y101.542 E-0.11689 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X175.012 Y98.297 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X174.668 Y97.887 E0.02205 ; perimeter
G1 X202.336 Y74.672 E1.48787 ; perimeter
G1 X202.612 Y74.395 E0.01613 ; perimeter
G1 X202.852 Y74.052 E0.01725 ; perimeter
G1 X203.029 Y73.673 E0.01725 ; perimeter
G1 X203.138 Y73.268 E0.01725 ; perimeter
G1 X203.174 Y72.851 E0.01725 ; perimeter
G1 X203.138 Y72.434 E0.01725 ; perimeter
G1 X203.029 Y72.030 E0.01725 ; perimeter
G1 X202.852 Y71.650 E0.01725 ; perimeter
G1 X202.628 Y71.330 E0.01612 ; perimeter
G1 X201.867 Y70.423 E0.04877 ; perimeter
G1 X202.277 Y70.079 E0.02205 ; perimeter
G1 X203.170 Y71.143 E0.05724 ; perimeter
G1 X203.398 Y71.455 E0.01591 ; perimeter
G1 X203.573 Y71.780 E0.01521 ; perimeter
G1 X203.641 Y71.956 E0.00777 ; perimeter
G1 X203.697 Y72.113 E0.00686 ; perimeter
G1 X203.777 Y72.473 E0.01518 ; perimeter
G1 X203.808 Y72.834 E0.01495 ; perimeter
G1 X203.789 Y73.206 E0.01533 ; perimeter
G1 X203.760 Y73.390 E0.00767 ; perimeter
G1 X203.664 Y73.752 E0.01542 ; perimeter
G1 X203.456 Y74.207 E0.02062 ; perimeter
G1 X203.340 Y74.398 E0.00920 ; perimeter
G1 X203.113 Y74.685 E0.01508 ; perimeter
G1 X202.837 Y74.949 E0.01573 ; perimeter
G1 X175.058 Y98.259 E1.49388 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.964 Y98.856 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X174.110 Y97.839 E0.05471 ; perimeter
G1 X202.068 Y74.379 E1.50349 ; perimeter
G1 X202.308 Y74.139 E0.01398 ; perimeter
G1 X202.508 Y73.853 E0.01439 ; perimeter
G1 X202.656 Y73.537 E0.01439 ; perimeter
G1 X202.746 Y73.199 E0.01439 ; perimeter
G1 X202.776 Y72.851 E0.01439 ; perimeter
G1 X202.746 Y72.503 E0.01439 ; perimeter
G1 X202.656 Y72.166 E0.01439 ; perimeter
G1 X202.508 Y71.849 E0.01439 ; perimeter
G1 X202.313 Y71.571 E0.01398 ; perimeter
G1 X201.309 Y70.374 E0.06438 ; perimeter
G1 X202.326 Y69.520 E0.05471 ; perimeter
G1 X203.483 Y70.899 E0.07412 ; perimeter
G1 X203.734 Y71.244 E0.01759 ; perimeter
G1 X203.933 Y71.614 E0.01733 ; perimeter
G1 X204.012 Y71.818 E0.00901 ; perimeter
G1 X204.078 Y72.003 E0.00809 ; perimeter
G1 X204.170 Y72.413 E0.01728 ; perimeter
G1 X204.205 Y72.828 E0.01717 ; perimeter
G1 X204.183 Y73.247 E0.01727 ; perimeter
G1 X204.149 Y73.472 E0.00938 ; perimeter
G1 X204.040 Y73.880 E0.01742 ; perimeter
G1 X203.877 Y74.268 E0.01733 ; perimeter
G1 X203.798 Y74.408 E0.00661 ; perimeter
G1 X203.666 Y74.625 E0.01046 ; perimeter
G1 X203.407 Y74.952 E0.01720 ; perimeter
G1 X203.102 Y75.244 E0.01739 ; perimeter
G1 X175.009 Y98.817 E1.51076 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.894 Y98.462 F10800.000 ; move inwards before travel
G1 F8640
G1 X174.110 Y97.839 E-0.30695 ; wipe and retract
G1 X175.613 Y96.577 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X200.954 Y68.718 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.670 Y65.996 E0.14635 ; perimeter
G1 X198.895 Y65.808 E0.01207 ; perimeter
G1 X194.974 Y61.136 E0.25127 ; perimeter
G1 X194.750 Y61.324 E0.01207 ; perimeter
G1 X192.466 Y58.603 E0.14635 ; perimeter
G1 X192.726 Y58.385 E0.01396 ; perimeter
G1 X192.904 Y58.401 E0.00739 ; perimeter
G1 X201.229 Y68.321 E0.53352 ; perimeter
G1 X201.213 Y68.500 E0.00739 ; perimeter
G1 X201.000 Y68.679 E0.01148 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.905 Y69.276 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.456 Y66.358 E0.15696 ; perimeter
G1 X197.931 Y66.798 E0.02823 ; perimeter
G1 X197.587 Y66.388 E0.02205 ; perimeter
G1 X198.336 Y65.759 E0.04030 ; perimeter
G1 X194.925 Y61.694 E0.21861 ; perimeter
G1 X194.176 Y62.323 E0.04030 ; perimeter
G1 X193.832 Y61.913 E0.02205 ; perimeter
G1 X194.357 Y61.472 E0.02823 ; perimeter
G1 X191.908 Y58.554 E0.15696 ; perimeter
G1 X192.597 Y57.976 E0.03705 ; perimeter
G1 X193.102 Y58.020 E0.02092 ; perimeter
G1 X201.638 Y68.192 E0.54705 ; perimeter
G1 X201.594 Y68.698 E0.02092 ; perimeter
G1 X200.951 Y69.238 E0.03457 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.856 Y69.835 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.407 Y66.916 E0.15696 ; perimeter
G1 X197.882 Y67.357 E0.02823 ; perimeter
G1 X197.029 Y66.339 E0.05471 ; perimeter
G1 X197.778 Y65.710 E0.04030 ; perimeter
G1 X194.876 Y62.253 E0.18596 ; perimeter
G1 X194.127 Y62.881 E0.04030 ; perimeter
G1 X193.273 Y61.864 E0.05471 ; perimeter
G1 X193.798 Y61.424 E0.02823 ; perimeter
G1 X191.349 Y58.505 E0.15696 ; perimeter
G1 X192.468 Y57.567 E0.06014 ; perimeter
G1 X193.301 Y57.639 E0.03444 ; perimeter
G1 X202.047 Y68.063 E0.56058 ; perimeter
G1 X201.974 Y68.896 E0.03444 ; perimeter
G1 X200.902 Y69.796 E0.05767 ; perimeter
M73 Q94 S8
M204 S1000 ; adjust acceleration
G1 X200.750 Y69.449 F10800.000 ; move inwards before travel
G1 F8640
G1 X198.747 Y67.308 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X160.226 Y76.553 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.882 Y76.143 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.16390 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X187.800 Y57.027 E1.06121 ; perimeter
G1 X188.099 Y56.808 E0.01527 ; perimeter
G1 X188.406 Y56.640 E0.01442 ; perimeter
G1 X188.732 Y56.513 E0.01443 ; perimeter
G1 X189.072 Y56.429 E0.01443 ; perimeter
G1 X189.420 Y56.391 E0.01444 ; perimeter
G1 X189.770 Y56.398 E0.01441 ; perimeter
G1 X190.116 Y56.451 E0.01443 ; perimeter
G1 X190.453 Y56.549 E0.01442 ; perimeter
G1 X190.775 Y56.691 E0.01451 ; perimeter
G1 X191.037 Y56.847 E0.01256 ; perimeter
G1 X191.331 Y57.084 E0.01556 ; perimeter
G1 X190.874 Y57.467 E0.02460 ; perimeter
G1 X190.676 Y57.328 E0.00997 ; perimeter
G1 X190.329 Y57.168 E0.01575 ; perimeter
G1 X189.854 Y57.050 E0.02017 ; perimeter
G1 X189.480 Y57.025 E0.01545 ; perimeter
G1 X189.213 Y57.048 E0.01100 ; perimeter
G1 X188.739 Y57.149 E0.01998 ; perimeter
G1 X188.283 Y57.359 E0.02068 ; perimeter
G1 X187.984 Y57.571 E0.01511 ; perimeter
G1 X168.261 Y74.121 E1.06065 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X160.272 Y76.514 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.177 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.323 Y76.094 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.18617 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X187.555 Y56.715 E1.05580 ; perimeter
G1 X187.885 Y56.473 E0.01687 ; perimeter
G1 X188.238 Y56.280 E0.01657 ; perimeter
G1 X188.612 Y56.134 E0.01657 ; perimeter
G1 X189.003 Y56.038 E0.01656 ; perimeter
G1 X189.403 Y55.994 E0.01657 ; perimeter
G1 X189.565 Y55.997 E0.00668 ; perimeter
G1 X189.805 Y56.003 E0.00988 ; perimeter
G1 X190.202 Y56.064 E0.01657 ; perimeter
G1 X190.588 Y56.176 E0.01656 ; perimeter
G1 X190.957 Y56.338 E0.01659 ; perimeter
G1 X191.260 Y56.518 E0.01452 ; perimeter
G1 X191.533 Y56.728 E0.01420 ; perimeter
G1 X191.910 Y57.115 E0.02226 ; perimeter
G1 X190.884 Y57.976 E0.05518 ; perimeter
G1 X190.478 Y57.673 E0.02090 ; perimeter
G1 X190.197 Y57.544 E0.01271 ; perimeter
G1 X189.792 Y57.443 E0.01721 ; perimeter
G1 X189.483 Y57.422 E0.01274 ; perimeter
G1 X189.272 Y57.441 E0.00873 ; perimeter
G1 X188.865 Y57.527 E0.01716 ; perimeter
G1 X188.482 Y57.704 E0.01735 ; perimeter
G1 X188.227 Y57.885 E0.01293 ; perimeter
G1 X168.405 Y74.517 E1.06593 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X160.223 Y77.073 E0.16378 ; perimeter
M73 P94 R7
M204 S1000 ; adjust acceleration
G1 X160.159 Y76.712 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.323 Y76.094 E-0.30695 ; wipe and retract
G1 X160.826 Y74.833 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y139.372 E0.03520 ; perimeter
G1 X83.970 Y139.372 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.03520 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.968 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y138.976 E0.05829 ; perimeter
G1 X84.366 Y138.976 E0.21040 ; perimeter
G1 X84.366 Y140.391 E0.05829 ; perimeter
G1 X84.010 Y140.747 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.132 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y138.580 E0.08138 ; perimeter
G1 X84.762 Y138.580 E0.24305 ; perimeter
G1 X84.762 Y140.555 E0.08138 ; perimeter
G1 X84.175 Y141.143 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.803 Y140.959 F10800.000 ; move inwards before travel
G1 F8640
G1 X80.883 Y141.173 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X83.441 Y140.278 ; move to first infill point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7344.92
G1 X83.654 Y140.065 E0.01532 ; infill
G1 X83.654 Y139.688 E0.01918 ; infill
G1 X83.337 Y139.688 E0.01613 ; infill
G1 X82.949 Y140.077 E0.02797 ; infill
G1 X82.255 Y140.077 E0.03531 ; infill
G1 X82.644 Y139.688 E0.02797 ; infill
G1 X81.951 Y139.688 E0.03531 ; infill
G1 X81.562 Y140.077 E0.02797 ; infill
G1 X80.869 Y140.077 E0.03531 ; infill
G1 X81.257 Y139.688 E0.02797 ; infill
G1 X80.564 Y139.688 E0.03531 ; infill
G1 X79.975 Y140.278 E0.04244 ; infill
G1 F8640
G1 X80.564 Y139.688 E-0.19238 ; wipe and retract
G1 X81.257 Y139.688 E-0.16005 ; wipe and retract
G1 X80.869 Y140.077 E-0.12679 ; wipe and retract
G1 X81.562 Y140.077 E-0.16005 ; wipe and retract
G1 X81.932 Y139.707 E-0.12073 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X76.851 Y130.269 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X76.672 Y130.284 E0.00739 ; perimeter
G1 X76.413 Y130.067 E0.01396 ; perimeter
G1 X88.166 Y116.060 E0.75325 ; perimeter
G1 X88.425 Y116.278 E0.01396 ; perimeter
G1 X88.441 Y116.456 E0.00739 ; perimeter
G1 X76.890 Y130.223 E0.74032 ; perimeter
M204 S1000 ; adjust acceleration
G1 X77.049 Y130.649 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.543 Y130.694 E0.02092 ; perimeter
G1 X75.854 Y130.116 E0.03705 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X77.681 Y126.675 E0.03348 ; perimeter
G1 X78.025 Y126.265 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.03348 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X84.701 Y118.308 E0.03348 ; perimeter
G1 X85.046 Y117.898 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.03348 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.806 Y116.080 E0.03705 ; perimeter
G1 X88.850 Y116.585 E0.02092 ; perimeter
G1 X77.088 Y130.603 E0.75385 ; perimeter
M204 S1000 ; adjust acceleration
G1 X77.247 Y131.030 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X76.414 Y131.103 E0.03444 ; perimeter
G1 X75.296 Y130.164 E0.06014 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X77.123 Y126.723 E0.03348 ; perimeter
G1 X77.976 Y125.706 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.03348 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X84.143 Y118.357 E0.03348 ; perimeter
G1 X84.997 Y117.339 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.03348 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.186 Y115.881 E0.06014 ; perimeter
G1 X89.259 Y116.714 E0.03444 ; perimeter
G1 X77.286 Y130.984 E0.76738 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.938 Y130.776 F10800.000 ; move inwards before travel
G1 F8640
G1 X76.414 Y131.103 E-0.20309 ; wipe and retract
G1 X75.296 Y130.164 E-0.33707 ; wipe and retract
G1 X75.908 Y129.435 E-0.21984 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X98.947 Y114.051 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X97.318 Y113.703 E0.06863 ; perimeter
G1 X97.323 Y113.295 E0.01682 ; perimeter
G1 X98.947 Y113.648 E0.06849 ; perimeter
G1 X98.947 Y113.991 E0.01415 ; perimeter
M204 S1000 ; adjust acceleration
G1 X98.564 Y113.939 F10800.000 ; move inwards before travel
G1 F8640
G1 X97.318 Y113.703 E-0.38199 ; wipe and retract
G1 X97.323 Y113.295 E-0.09429 ; wipe and retract
G1 X98.524 Y113.556 E-0.28372 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X89.489 Y114.699 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.15587 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X61.731 Y95.717 E1.06065 ; perimeter
G1 X61.432 Y95.505 E0.01511 ; perimeter
G1 X60.976 Y95.295 E0.02068 ; perimeter
G1 X60.501 Y95.194 E0.01998 ; perimeter
G1 X60.235 Y95.171 E0.01100 ; perimeter
G1 X59.861 Y95.196 E0.01545 ; perimeter
G1 X59.386 Y95.315 E0.02017 ; perimeter
G1 X59.038 Y95.474 E0.01575 ; perimeter
G1 X58.841 Y95.614 E0.00997 ; perimeter
G1 X58.382 Y95.229 E0.02466 ; perimeter
G1 X58.560 Y95.079 E0.00959 ; perimeter
G1 X58.947 Y94.833 E0.01888 ; perimeter
G1 X59.262 Y94.695 E0.01416 ; perimeter
G1 X59.598 Y94.598 E0.01442 ; perimeter
G1 X59.945 Y94.545 E0.01443 ; perimeter
G1 X60.295 Y94.537 E0.01443 ; perimeter
G1 X60.514 Y94.561 E0.00909 ; perimeter
G1 X60.983 Y94.659 E0.01973 ; perimeter
G1 X61.309 Y94.786 E0.01443 ; perimeter
G1 X61.616 Y94.954 E0.01443 ; perimeter
G1 X61.915 Y95.173 E0.01527 ; perimeter
G1 X81.649 Y111.732 E1.06121 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X89.833 Y114.289 E0.16390 ; perimeter
G1 X89.528 Y114.653 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.538 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.16626 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X61.488 Y96.031 E1.06593 ; perimeter
G1 X61.232 Y95.850 E0.01293 ; perimeter
G1 X60.850 Y95.674 E0.01735 ; perimeter
G1 X60.442 Y95.587 E0.01716 ; perimeter
G1 X60.231 Y95.568 E0.00873 ; perimeter
G1 X59.923 Y95.589 E0.01273 ; perimeter
G1 X59.518 Y95.690 E0.01721 ; perimeter
G1 X59.237 Y95.819 E0.01271 ; perimeter
G1 X58.830 Y96.122 E0.02090 ; perimeter
G1 X57.807 Y95.263 E0.05506 ; perimeter
G1 X58.058 Y94.984 E0.01548 ; perimeter
G1 X58.326 Y94.758 E0.01442 ; perimeter
G1 X58.761 Y94.483 E0.02122 ; perimeter
G1 X59.127 Y94.322 E0.01647 ; perimeter
G1 X59.513 Y94.210 E0.01656 ; perimeter
G1 X59.910 Y94.149 E0.01656 ; perimeter
G1 X60.312 Y94.140 E0.01657 ; perimeter
G1 X60.712 Y94.184 E0.01656 ; perimeter
G1 X61.102 Y94.280 E0.01657 ; perimeter
G1 X61.477 Y94.426 E0.01657 ; perimeter
G1 X61.830 Y94.619 E0.01657 ; perimeter
G1 X62.160 Y94.861 E0.01687 ; perimeter
G1 X81.793 Y111.335 E1.05580 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X90.392 Y114.240 E0.18617 ; perimeter
G1 X89.577 Y115.212 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.257 Y114.972 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.024 Y113.134 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X48.761 Y106.864 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.501 Y106.646 E0.01396 ; perimeter
G1 X48.486 Y106.468 E0.00739 ; perimeter
G1 X56.811 Y96.547 E0.53352 ; perimeter
G1 X56.989 Y96.531 E0.00739 ; perimeter
G1 X57.249 Y96.749 E0.01396 ; perimeter
G1 X54.965 Y99.470 E0.14635 ; perimeter
G1 X54.741 Y99.282 E0.01207 ; perimeter
G1 X50.820 Y103.954 E0.25127 ; perimeter
G1 X51.045 Y104.143 E0.01207 ; perimeter
G1 X48.800 Y106.818 E0.14388 ; perimeter
M204 S1000 ; adjust acceleration
G1 X48.810 Y107.422 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.121 Y106.844 E0.03705 ; perimeter
G1 X48.077 Y106.339 E0.02092 ; perimeter
G1 X56.612 Y96.166 E0.54705 ; perimeter
G1 X57.118 Y96.122 E0.02092 ; perimeter
G1 X57.807 Y96.700 E0.03705 ; perimeter
G1 X55.358 Y99.619 E0.15696 ; perimeter
G1 X55.883 Y100.059 E0.02823 ; perimeter
G1 X55.539 Y100.469 E0.02205 ; perimeter
G1 X54.790 Y99.840 E0.04030 ; perimeter
G1 X51.378 Y103.905 E0.21861 ; perimeter
G1 X52.128 Y104.534 E0.04030 ; perimeter
G1 X51.784 Y104.944 E0.02205 ; perimeter
G1 X51.259 Y104.504 E0.02823 ; perimeter
G1 X48.848 Y107.377 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X48.859 Y107.981 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X47.740 Y107.043 E0.06014 ; perimeter
G1 X47.668 Y106.210 E0.03444 ; perimeter
G1 X56.414 Y95.786 E0.56058 ; perimeter
G1 X57.247 Y95.713 E0.03444 ; perimeter
G1 X58.365 Y96.651 E0.06014 ; perimeter
G1 X55.916 Y99.570 E0.15696 ; perimeter
G1 X56.441 Y100.010 E0.02823 ; perimeter
G1 X55.588 Y101.028 E0.05471 ; perimeter
G1 X54.838 Y100.399 E0.04030 ; perimeter
G1 X51.937 Y103.857 E0.18596 ; perimeter
G1 X52.686 Y104.485 E0.04030 ; perimeter
G1 X51.833 Y105.503 E0.05471 ; perimeter
G1 X51.308 Y105.062 E0.02823 ; perimeter
G1 X48.897 Y107.935 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X48.744 Y107.598 F10800.000 ; move inwards before travel
G1 F8640
G1 X47.740 Y107.043 E-0.33736 ; wipe and retract
G1 X47.668 Y106.210 E-0.19305 ; wipe and retract
G1 X48.307 Y105.448 E-0.22959 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X74.702 Y136.444 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X46.877 Y113.096 E1.49635 ; perimeter
G1 X46.602 Y112.831 E0.01573 ; perimeter
G1 X46.377 Y112.547 E0.01493 ; perimeter
G1 X46.192 Y112.234 E0.01498 ; perimeter
G1 X46.051 Y111.898 E0.01502 ; perimeter
G1 X45.955 Y111.536 E0.01542 ; perimeter
G1 X45.926 Y111.352 E0.00767 ; perimeter
G1 X45.907 Y110.981 E0.01533 ; perimeter
G1 X45.938 Y110.619 E0.01495 ; perimeter
G1 X46.017 Y110.264 E0.01498 ; perimeter
G1 X46.144 Y109.923 E0.01501 ; perimeter
G1 X46.317 Y109.601 E0.01503 ; perimeter
G1 X46.545 Y109.289 E0.01591 ; perimeter
G1 X47.438 Y108.225 E0.05724 ; perimeter
G1 X47.848 Y108.569 E0.02205 ; perimeter
G1 X47.087 Y109.476 E0.04877 ; perimeter
G1 X46.862 Y109.796 E0.01612 ; perimeter
G1 X46.685 Y110.176 E0.01725 ; perimeter
G1 X46.577 Y110.580 E0.01725 ; perimeter
G1 X46.541 Y110.997 E0.01725 ; perimeter
G1 X46.577 Y111.414 E0.01725 ; perimeter
G1 X46.685 Y111.819 E0.01725 ; perimeter
G1 X46.862 Y112.198 E0.01725 ; perimeter
G1 X47.102 Y112.541 E0.01725 ; perimeter
G1 X47.379 Y112.818 E0.01612 ; perimeter
G1 X75.047 Y136.034 E1.48787 ; perimeter
G1 X74.741 Y136.398 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X74.751 Y137.002 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.612 Y113.391 E1.51323 ; perimeter
G1 X46.308 Y113.098 E0.01739 ; perimeter
G1 X46.050 Y112.772 E0.01714 ; perimeter
G1 X45.837 Y112.412 E0.01720 ; perimeter
G1 X45.675 Y112.026 E0.01725 ; perimeter
G1 X45.566 Y111.618 E0.01742 ; perimeter
G1 X45.531 Y111.393 E0.00938 ; perimeter
G1 X45.510 Y110.974 E0.01727 ; perimeter
G1 X45.545 Y110.559 E0.01717 ; perimeter
G1 X45.636 Y110.151 E0.01721 ; perimeter
G1 X45.782 Y109.759 E0.01724 ; perimeter
G1 X45.981 Y109.390 E0.01726 ; perimeter
G1 X46.232 Y109.045 E0.01759 ; perimeter
G1 X47.389 Y107.667 E0.07412 ; perimeter
G1 X48.406 Y108.520 E0.05471 ; perimeter
G1 X47.402 Y109.717 E0.06438 ; perimeter
G1 X47.207 Y109.995 E0.01398 ; perimeter
G1 X47.059 Y110.312 E0.01439 ; perimeter
G1 X46.969 Y110.649 E0.01439 ; perimeter
G1 X46.938 Y110.997 E0.01439 ; perimeter
G1 X46.969 Y111.345 E0.01439 ; perimeter
G1 X47.059 Y111.683 E0.01439 ; perimeter
G1 X47.207 Y111.999 E0.01439 ; perimeter
G1 X47.407 Y112.285 E0.01439 ; perimeter
G1 X47.647 Y112.525 E0.01398 ; perimeter
G1 X75.605 Y135.985 E1.50349 ; perimeter
G1 X74.790 Y136.956 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X74.448 Y136.741 F10800.000 ; move inwards before travel
G1 F8640
G1 X72.265 Y134.844 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X150.482 Y114.051 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X150.482 Y113.648 E0.01662 ; perimeter
G1 X152.113 Y113.293 E0.06876 ; perimeter
G1 X152.113 Y113.702 E0.01687 ; perimeter
G1 X150.541 Y114.039 E0.06624 ; perimeter
M204 S1000 ; adjust acceleration
G1 X150.630 Y113.680 F10800.000 ; move inwards before travel
G1 F8640
G1 X150.482 Y113.648 E-0.09127 ; wipe and retract
G1 X152.113 Y113.293 E-0.38542 ; wipe and retract
G1 X152.113 Y113.702 E-0.09457 ; wipe and retract
G1 X151.314 Y113.873 E-0.18873 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X172.579 Y130.269 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X160.989 Y116.456 E0.74280 ; perimeter
G1 X161.004 Y116.278 E0.00739 ; perimeter
G1 X161.264 Y116.060 E0.01396 ; perimeter
G1 X173.017 Y130.067 E0.75325 ; perimeter
G1 X172.757 Y130.284 E0.01396 ; perimeter
G1 X172.638 Y130.274 E0.00492 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.381 Y130.649 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.579 Y116.585 E0.75632 ; perimeter
G1 X160.624 Y116.080 E0.02092 ; perimeter
G1 X161.313 Y115.502 E0.03705 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X164.384 Y117.898 E0.03348 ; perimeter
G1 X164.728 Y118.308 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.03348 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X171.405 Y126.265 E0.03348 ; perimeter
G1 X171.749 Y126.675 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.03348 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X172.886 Y130.694 E0.03705 ; perimeter
G1 X172.440 Y130.655 E0.01845 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.182 Y131.030 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.170 Y116.714 E0.76985 ; perimeter
G1 X160.243 Y115.881 E0.03444 ; perimeter
G1 X161.361 Y114.943 E0.06014 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X164.433 Y117.339 E0.03348 ; perimeter
G1 X165.287 Y118.357 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.03348 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X171.453 Y125.706 E0.03348 ; perimeter
G1 X172.307 Y126.723 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.03348 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.015 Y131.103 E0.06014 ; perimeter
G1 X172.242 Y131.035 E0.03197 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.150 Y130.631 F10800.000 ; move inwards before travel
G1 F8640
G1 X170.121 Y128.519 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y139.372 E0.03520 ; perimeter
G1 X169.775 Y139.372 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.03520 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.462 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y138.976 E0.05829 ; perimeter
G1 X170.171 Y138.976 E0.21040 ; perimeter
G1 X170.171 Y140.391 E0.05829 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.522 Y140.789 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.298 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y138.580 E0.08138 ; perimeter
G1 X170.567 Y138.580 E0.24306 ; perimeter
G1 X170.567 Y140.555 E0.08138 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.358 Y141.185 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.282 Y140.786 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.667 Y140.555 E-0.21581 ; wipe and retract
G1 X164.667 Y138.580 E-0.45614 ; wipe and retract
G1 X165.049 Y138.580 E-0.08805 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X165.780 Y140.278 ; move to first infill point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7344.9
G1 X166.369 Y139.688 E0.04244 ; infill
G1 X167.063 Y139.688 E0.03531 ; infill
G1 X166.674 Y140.077 E0.02797 ; infill
G1 X167.367 Y140.077 E0.03531 ; infill
G1 X167.756 Y139.688 E0.02797 ; infill
G1 X168.449 Y139.688 E0.03531 ; infill
G1 X168.061 Y140.077 E0.02797 ; infill
G1 X168.754 Y140.077 E0.03531 ; infill
G1 X169.142 Y139.688 E0.02797 ; infill
G1 X169.459 Y139.688 E0.01613 ; infill
G1 X169.459 Y140.065 E0.01918 ; infill
G1 X169.246 Y140.278 E0.01532 ; infill
G1 F8640
G1 X169.459 Y140.065 E-0.06943 ; wipe and retract
G1 X169.459 Y139.688 E-0.08693 ; wipe and retract
G1 X169.142 Y139.688 E-0.07312 ; wipe and retract
G1 X168.754 Y140.077 E-0.12679 ; wipe and retract
G1 X168.061 Y140.077 E-0.16005 ; wipe and retract
G1 X168.449 Y139.688 E-0.12679 ; wipe and retract
G1 X167.943 Y139.688 E-0.11689 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X174.727 Y136.444 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X174.383 Y136.034 E0.02205 ; perimeter
G1 X202.050 Y112.818 E1.48787 ; perimeter
G1 X202.327 Y112.541 E0.01613 ; perimeter
G1 X202.567 Y112.198 E0.01725 ; perimeter
G1 X202.744 Y111.819 E0.01725 ; perimeter
G1 X202.853 Y111.414 E0.01725 ; perimeter
G1 X202.889 Y110.997 E0.01725 ; perimeter
G1 X202.853 Y110.580 E0.01725 ; perimeter
G1 X202.744 Y110.176 E0.01725 ; perimeter
G1 X202.567 Y109.796 E0.01725 ; perimeter
G1 X202.343 Y109.476 E0.01612 ; perimeter
G1 X201.582 Y108.569 E0.04877 ; perimeter
G1 X201.992 Y108.225 E0.02205 ; perimeter
G1 X202.885 Y109.289 E0.05724 ; perimeter
G1 X203.113 Y109.601 E0.01591 ; perimeter
G1 X203.287 Y109.927 E0.01521 ; perimeter
G1 X203.356 Y110.102 E0.00777 ; perimeter
G1 X203.411 Y110.259 E0.00686 ; perimeter
G1 X203.492 Y110.619 E0.01518 ; perimeter
G1 X203.523 Y110.981 E0.01495 ; perimeter
G1 X203.503 Y111.352 E0.01533 ; perimeter
G1 X203.475 Y111.536 E0.00767 ; perimeter
G1 X203.379 Y111.898 E0.01542 ; perimeter
G1 X203.171 Y112.353 E0.02062 ; perimeter
G1 X203.055 Y112.544 E0.00920 ; perimeter
G1 X202.827 Y112.831 E0.01508 ; perimeter
G1 X202.552 Y113.096 E0.01573 ; perimeter
G1 X174.773 Y136.405 E1.49388 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.678 Y137.002 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X173.825 Y135.985 E0.05471 ; perimeter
G1 X201.782 Y112.525 E1.50349 ; perimeter
G1 X202.022 Y112.285 E0.01398 ; perimeter
G1 X202.223 Y111.999 E0.01439 ; perimeter
G1 X202.370 Y111.683 E0.01439 ; perimeter
G1 X202.461 Y111.345 E0.01439 ; perimeter
G1 X202.491 Y110.997 E0.01439 ; perimeter
G1 X202.461 Y110.649 E0.01439 ; perimeter
G1 X202.370 Y110.312 E0.01439 ; perimeter
G1 X202.223 Y109.995 E0.01439 ; perimeter
G1 X202.028 Y109.717 E0.01398 ; perimeter
G1 X201.024 Y108.520 E0.06438 ; perimeter
G1 X202.041 Y107.667 E0.05471 ; perimeter
G1 X203.197 Y109.045 E0.07412 ; perimeter
G1 X203.449 Y109.390 E0.01759 ; perimeter
G1 X203.648 Y109.760 E0.01733 ; perimeter
G1 X203.727 Y109.964 E0.00901 ; perimeter
G1 X203.793 Y110.149 E0.00809 ; perimeter
G1 X203.885 Y110.559 E0.01728 ; perimeter
G1 X203.920 Y110.974 E0.01717 ; perimeter
G1 X203.898 Y111.393 E0.01727 ; perimeter
G1 X203.864 Y111.618 E0.00938 ; perimeter
G1 X203.754 Y112.026 E0.01742 ; perimeter
G1 X203.592 Y112.414 E0.01733 ; perimeter
G1 X203.512 Y112.554 E0.00661 ; perimeter
G1 X203.381 Y112.771 E0.01046 ; perimeter
G1 X203.122 Y113.098 E0.01720 ; perimeter
G1 X202.817 Y113.391 E0.01739 ; perimeter
G1 X174.724 Y136.963 E1.51076 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.609 Y136.608 F10800.000 ; move inwards before travel
G1 F8640
G1 X173.825 Y135.985 E-0.30695 ; wipe and retract
G1 X175.328 Y134.723 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X200.669 Y106.864 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.385 Y104.143 E0.14635 ; perimeter
G1 X198.610 Y103.954 E0.01207 ; perimeter
G1 X194.689 Y99.282 E0.25127 ; perimeter
G1 X194.464 Y99.470 E0.01207 ; perimeter
G1 X192.181 Y96.749 E0.14635 ; perimeter
G1 X192.440 Y96.531 E0.01396 ; perimeter
G1 X192.619 Y96.547 E0.00739 ; perimeter
G1 X200.944 Y106.468 E0.53352 ; perimeter
G1 X200.928 Y106.646 E0.00739 ; perimeter
G1 X200.715 Y106.826 E0.01148 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.620 Y107.422 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.171 Y104.504 E0.15696 ; perimeter
G1 X197.646 Y104.944 E0.02823 ; perimeter
G1 X197.302 Y104.534 E0.02205 ; perimeter
G1 X198.051 Y103.905 E0.04030 ; perimeter
G1 X194.640 Y99.840 E0.21861 ; perimeter
G1 X193.891 Y100.469 E0.04030 ; perimeter
G1 X193.547 Y100.059 E0.02205 ; perimeter
G1 X194.072 Y99.619 E0.02823 ; perimeter
G1 X191.623 Y96.700 E0.15696 ; perimeter
G1 X192.311 Y96.122 E0.03705 ; perimeter
G1 X192.817 Y96.166 E0.02092 ; perimeter
G1 X201.353 Y106.339 E0.54705 ; perimeter
G1 X201.309 Y106.844 E0.02092 ; perimeter
G1 X200.666 Y107.384 E0.03457 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.571 Y107.981 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.122 Y105.062 E0.15696 ; perimeter
G1 X197.597 Y105.503 E0.02823 ; perimeter
G1 X196.743 Y104.485 E0.05471 ; perimeter
G1 X197.493 Y103.857 E0.04030 ; perimeter
G1 X194.591 Y100.399 E0.18596 ; perimeter
G1 X193.842 Y101.028 E0.04030 ; perimeter
G1 X192.988 Y100.010 E0.05471 ; perimeter
G1 X193.513 Y99.570 E0.02823 ; perimeter
G1 X191.064 Y96.651 E0.15696 ; perimeter
G1 X192.182 Y95.713 E0.06014 ; perimeter
G1 X193.015 Y95.786 E0.03444 ; perimeter
G1 X201.762 Y106.210 E0.56058 ; perimeter
G1 X201.689 Y107.043 E0.03444 ; perimeter
G1 X200.617 Y107.942 E0.05767 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.465 Y107.595 F10800.000 ; move inwards before travel
G1 F8640
G1 X198.462 Y105.455 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
G1 X159.940 Y114.699 ; move to first perimeter point
G1 Z21.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.596 Y114.289 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.16390 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X187.515 Y95.173 E1.06121 ; perimeter
G1 X187.813 Y94.954 E0.01527 ; perimeter
G1 X188.120 Y94.786 E0.01442 ; perimeter
G1 X188.447 Y94.659 E0.01443 ; perimeter
G1 X188.787 Y94.575 E0.01443 ; perimeter
G1 X189.135 Y94.537 E0.01444 ; perimeter
G1 X189.485 Y94.545 E0.01441 ; perimeter
G1 X189.831 Y94.598 E0.01443 ; perimeter
G1 X190.167 Y94.695 E0.01442 ; perimeter
G1 X190.490 Y94.837 E0.01451 ; perimeter
G1 X190.752 Y94.993 E0.01256 ; perimeter
G1 X191.046 Y95.230 E0.01556 ; perimeter
G1 X190.589 Y95.614 E0.02460 ; perimeter
G1 X190.391 Y95.474 E0.00997 ; perimeter
G1 X190.044 Y95.315 E0.01575 ; perimeter
G1 X189.568 Y95.196 E0.02017 ; perimeter
G1 X189.194 Y95.171 E0.01545 ; perimeter
G1 X188.928 Y95.194 E0.01100 ; perimeter
G1 X188.454 Y95.295 E0.01998 ; perimeter
G1 X187.998 Y95.505 E0.02068 ; perimeter
G1 X187.699 Y95.717 E0.01511 ; perimeter
G1 X167.976 Y112.267 E1.06065 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.986 Y114.661 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.892 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.038 Y114.240 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.18617 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X187.270 Y94.861 E1.05580 ; perimeter
G1 X187.600 Y94.619 E0.01687 ; perimeter
G1 X187.953 Y94.426 E0.01657 ; perimeter
G1 X188.327 Y94.280 E0.01657 ; perimeter
G1 X188.718 Y94.184 E0.01656 ; perimeter
G1 X189.118 Y94.140 E0.01657 ; perimeter
G1 X189.280 Y94.144 E0.00668 ; perimeter
G1 X189.519 Y94.149 E0.00988 ; perimeter
G1 X189.917 Y94.210 E0.01657 ; perimeter
G1 X190.303 Y94.322 E0.01656 ; perimeter
G1 X190.672 Y94.484 E0.01659 ; perimeter
G1 X190.975 Y94.664 E0.01452 ; perimeter
G1 X191.248 Y94.874 E0.01420 ; perimeter
G1 X191.625 Y95.261 E0.02226 ; perimeter
G1 X190.599 Y96.122 E0.05518 ; perimeter
G1 X190.192 Y95.819 E0.02090 ; perimeter
G1 X189.912 Y95.690 E0.01271 ; perimeter
G1 X189.507 Y95.589 E0.01721 ; perimeter
G1 X189.198 Y95.568 E0.01274 ; perimeter
G1 X188.987 Y95.587 E0.00873 ; perimeter
G1 X188.580 Y95.674 E0.01716 ; perimeter
G1 X188.197 Y95.850 E0.01735 ; perimeter
G1 X187.941 Y96.031 E0.01293 ; perimeter
G1 X168.120 Y112.663 E1.06593 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X159.938 Y115.219 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.874 Y114.858 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;21.75


G1 F8640
G1 X159.038 Y114.240 E-0.30695 ; wipe and retract
G1 X160.541 Y112.979 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;21.75
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y101.371 E0.02925 ; perimeter
G1 X84.255 Y101.371 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.02925 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.253 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y100.974 E0.05234 ; perimeter
G1 X84.651 Y100.974 E0.21040 ; perimeter
G1 X84.651 Y102.245 E0.05234 ; perimeter
G1 X84.296 Y102.600 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.417 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y100.578 E0.07543 ; perimeter
G1 X85.047 Y100.578 E0.24305 ; perimeter
G1 X85.047 Y102.409 E0.07543 ; perimeter
G1 X84.460 Y102.997 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.089 Y102.811 F10800.000 ; move inwards before travel
G1 F8640
G1 X81.168 Y103.027 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X83.821 Y102.131 ; move to first infill point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7570.1
G1 X83.376 Y101.687 E0.03109 ; infill
G1 X82.704 Y101.687 E0.03324 ; infill
G1 X82.948 Y101.931 E0.01705 ; infill
G1 X82.275 Y101.931 E0.03324 ; infill
G1 X82.031 Y101.687 E0.01705 ; infill
G1 X81.359 Y101.687 E0.03324 ; infill
G1 X81.603 Y101.931 E0.01705 ; infill
G1 X80.930 Y101.931 E0.03324 ; infill
G1 X80.686 Y101.687 E0.01705 ; infill
G1 X80.256 Y101.687 E0.02125 ; infill
G1 X80.256 Y101.929 E0.01199 ; infill
G1 X80.458 Y102.131 E0.01413 ; infill
G1 F8640
G1 X80.256 Y101.929 E-0.06602 ; wipe and retract
G1 X80.256 Y101.687 E-0.05602 ; wipe and retract
G1 X80.686 Y101.687 E-0.09927 ; wipe and retract
G1 X80.930 Y101.931 E-0.07965 ; wipe and retract
G1 X81.603 Y101.931 E-0.15529 ; wipe and retract
G1 X81.359 Y101.687 E-0.07965 ; wipe and retract
G1 X82.031 Y101.687 E-0.15529 ; wipe and retract
G1 X82.242 Y101.897 E-0.06880 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X76.863 Y92.059 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X76.698 Y91.921 E0.00888 ; perimeter
G1 X88.451 Y77.914 E0.75325 ; perimeter
G1 X88.616 Y78.052 E0.00888 ; perimeter
G1 X76.902 Y92.013 E0.75078 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.982 Y92.534 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.828 Y92.547 E0.00635 ; perimeter
G1 X76.140 Y91.969 E0.03705 ; perimeter
G1 X78.589 Y89.051 E0.15696 ; perimeter
G1 X78.028 Y88.581 E0.03013 ; perimeter
G1 X78.372 Y88.171 E0.02205 ; perimeter
G1 X78.933 Y88.641 E0.03013 ; perimeter
G1 X85.609 Y80.684 E0.42789 ; perimeter
G1 X85.049 Y80.214 E0.03013 ; perimeter
G1 X85.393 Y79.804 E0.02205 ; perimeter
G1 X85.953 Y80.274 E0.03013 ; perimeter
G1 X88.402 Y77.355 E0.15696 ; perimeter
G1 X89.091 Y77.933 E0.03705 ; perimeter
G1 X89.105 Y78.087 E0.00635 ; perimeter
G1 X77.021 Y92.488 E0.77445 ; perimeter
M204 S1000 ; adjust acceleration
G1 X77.180 Y92.915 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X76.699 Y92.957 E0.01988 ; perimeter
G1 X75.581 Y92.018 E0.06014 ; perimeter
G1 X78.030 Y89.100 E0.15696 ; perimeter
G1 X77.470 Y88.630 E0.03013 ; perimeter
G1 X78.324 Y87.612 E0.05471 ; perimeter
G1 X78.884 Y88.082 E0.03013 ; perimeter
G1 X85.051 Y80.733 E0.39523 ; perimeter
G1 X84.490 Y80.263 E0.03013 ; perimeter
G1 X85.344 Y79.245 E0.05471 ; perimeter
G1 X85.904 Y79.716 E0.03013 ; perimeter
G1 X88.353 Y76.797 E0.15696 ; perimeter
G1 X89.472 Y77.735 E0.06014 ; perimeter
G1 X89.514 Y78.216 E0.01988 ; perimeter
G1 X77.219 Y92.869 E0.78798 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.872 Y92.659 F10800.000 ; move inwards before travel
G1 F8640
G1 X76.699 Y92.957 E-0.12161 ; wipe and retract
G1 X75.581 Y92.018 E-0.33707 ; wipe and retract
G1 X76.420 Y91.019 E-0.30132 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X89.774 Y76.553 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.15587 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X62.016 Y57.572 E1.06063 ; perimeter
G1 X61.721 Y57.361 E0.01494 ; perimeter
G1 X61.253 Y57.146 E0.02121 ; perimeter
G1 X60.769 Y57.046 E0.02038 ; perimeter
G1 X60.524 Y57.025 E0.01010 ; perimeter
G1 X60.156 Y57.049 E0.01521 ; perimeter
G1 X59.671 Y57.169 E0.02057 ; perimeter
G1 X59.328 Y57.325 E0.01555 ; perimeter
G1 X59.127 Y57.468 E0.01016 ; perimeter
G1 X58.667 Y57.083 E0.02469 ; perimeter
G1 X58.836 Y56.940 E0.00911 ; perimeter
G1 X59.234 Y56.687 E0.01941 ; perimeter
G1 X59.387 Y56.619 E0.00690 ; perimeter
G1 X59.547 Y56.549 E0.00721 ; perimeter
G1 X59.884 Y56.451 E0.01444 ; perimeter
G1 X60.230 Y56.398 E0.01442 ; perimeter
G1 X60.580 Y56.391 E0.01443 ; perimeter
G1 X60.773 Y56.412 E0.00801 ; perimeter
G1 X60.928 Y56.429 E0.00640 ; perimeter
G1 X61.268 Y56.513 E0.01443 ; perimeter
G1 X61.594 Y56.640 E0.01443 ; perimeter
G1 X61.901 Y56.808 E0.01443 ; perimeter
G1 X62.200 Y57.027 E0.01527 ; perimeter
G1 X81.934 Y73.586 E1.06121 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.118 Y76.143 E0.16390 ; perimeter
G1 X89.813 Y76.507 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.823 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.16626 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X61.774 Y57.885 E1.06592 ; perimeter
G1 X61.521 Y57.706 E0.01275 ; perimeter
G1 X61.129 Y57.525 E0.01781 ; perimeter
G1 X60.711 Y57.439 E0.01756 ; perimeter
G1 X60.520 Y57.422 E0.00790 ; perimeter
G1 X60.217 Y57.442 E0.01252 ; perimeter
G1 X59.802 Y57.544 E0.01760 ; perimeter
G1 X59.526 Y57.670 E0.01249 ; perimeter
G1 X59.115 Y57.976 E0.02110 ; perimeter
G1 X58.092 Y57.117 E0.05505 ; perimeter
G1 X58.338 Y56.842 E0.01520 ; perimeter
G1 X58.601 Y56.620 E0.01417 ; perimeter
G1 X59.046 Y56.336 E0.02177 ; perimeter
G1 X59.412 Y56.176 E0.01645 ; perimeter
G1 X59.798 Y56.064 E0.01657 ; perimeter
G1 X60.196 Y56.003 E0.01656 ; perimeter
G1 X60.598 Y55.994 E0.01656 ; perimeter
G1 X60.997 Y56.038 E0.01656 ; perimeter
G1 X61.388 Y56.134 E0.01657 ; perimeter
G1 X61.762 Y56.280 E0.01656 ; perimeter
G1 X62.115 Y56.473 E0.01657 ; perimeter
G1 X62.445 Y56.715 E0.01687 ; perimeter
G1 X82.078 Y73.189 E1.05580 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X90.677 Y76.094 E0.18617 ; perimeter
G1 X89.862 Y77.065 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.543 Y76.826 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.309 Y74.987 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X49.046 Y68.718 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.881 Y68.579 E0.00888 ; perimeter
G1 X51.165 Y65.858 E0.14635 ; perimeter
G1 X51.330 Y65.996 E0.00888 ; perimeter
G1 X49.085 Y68.672 E0.14388 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X48.881 Y68.579 E-0.05168 ; wipe and retract
G1 X50.853 Y66.229 E-0.70832 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X55.250 Y61.324 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X55.085 Y61.185 E0.00888 ; perimeter
G1 X57.369 Y58.464 E0.14635 ; perimeter
G1 X57.534 Y58.603 E0.00888 ; perimeter
G1 X55.289 Y61.278 E0.14388 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X55.085 Y61.185 E-0.05168 ; wipe and retract
G1 X57.057 Y58.836 E-0.70832 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X49.095 Y69.276 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.406 Y68.698 E0.03705 ; perimeter
G1 X48.393 Y68.545 E0.00635 ; perimeter
G1 X57.250 Y57.989 E0.56765 ; perimeter
G1 X57.403 Y57.976 E0.00635 ; perimeter
G1 X58.092 Y58.554 E0.03705 ; perimeter
G1 X55.643 Y61.472 E0.15696 ; perimeter
G1 X55.892 Y61.681 E0.01340 ; perimeter
G1 X55.548 Y62.092 E0.02205 ; perimeter
G1 X54.883 Y61.533 E0.03577 ; perimeter
G1 X51.472 Y65.599 E0.21861 ; perimeter
G1 X52.137 Y66.157 E0.03577 ; perimeter
G1 X51.793 Y66.567 E0.02205 ; perimeter
G1 X51.544 Y66.358 E0.01340 ; perimeter
G1 X49.134 Y69.230 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X49.144 Y69.835 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.026 Y68.896 E0.06014 ; perimeter
G1 X47.984 Y68.416 E0.01988 ; perimeter
G1 X57.052 Y57.609 E0.58117 ; perimeter
G1 X57.532 Y57.567 E0.01988 ; perimeter
G1 X58.651 Y58.505 E0.06014 ; perimeter
G1 X56.202 Y61.424 E0.15696 ; perimeter
M73 Q95 S7
G1 X56.451 Y61.633 E0.01340 ; perimeter
G1 X55.597 Y62.650 E0.05471 ; perimeter
G1 X54.932 Y62.092 E0.03577 ; perimeter
G1 X52.031 Y65.550 E0.18596 ; perimeter
G1 X52.696 Y66.108 E0.03577 ; perimeter
G1 X51.842 Y67.125 E0.05471 ; perimeter
G1 X51.593 Y66.916 E0.01340 ; perimeter
G1 X49.182 Y69.789 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X49.018 Y69.455 F10800.000 ; move inwards before travel
G1 F8640
G1 X48.026 Y68.896 E-0.33736 ; wipe and retract
G1 X47.984 Y68.416 E-0.11142 ; wipe and retract
G1 X48.850 Y67.383 E-0.31123 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X74.796 Y98.137 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.163 Y74.950 E1.48605 ; perimeter
G1 X46.886 Y74.683 E0.01582 ; perimeter
G1 X46.660 Y74.397 E0.01501 ; perimeter
G1 X46.475 Y74.083 E0.01505 ; perimeter
G1 X46.334 Y73.744 E0.01509 ; perimeter
G1 X46.213 Y73.218 E0.02224 ; perimeter
G1 X46.192 Y72.843 E0.01547 ; perimeter
G1 X46.222 Y72.480 E0.01503 ; perimeter
G1 X46.301 Y72.123 E0.01506 ; perimeter
G1 X46.428 Y71.780 E0.01508 ; perimeter
G1 X46.601 Y71.457 E0.01510 ; perimeter
G1 X46.830 Y71.143 E0.01599 ; perimeter
G1 X47.723 Y70.079 E0.05723 ; perimeter
G1 X48.133 Y70.423 E0.02205 ; perimeter
G1 X47.372 Y71.330 E0.04877 ; perimeter
G1 X47.148 Y71.650 E0.01612 ; perimeter
G1 X46.971 Y72.030 E0.01725 ; perimeter
G1 X46.862 Y72.434 E0.01725 ; perimeter
G1 X46.826 Y72.851 E0.01725 ; perimeter
G1 X46.862 Y73.268 E0.01725 ; perimeter
G1 X46.971 Y73.673 E0.01725 ; perimeter
G1 X47.148 Y74.052 E0.01725 ; perimeter
G1 X47.388 Y74.395 E0.01725 ; perimeter
G1 X47.664 Y74.672 E0.01612 ; perimeter
G1 X75.140 Y97.727 E1.47757 ; perimeter
G1 X74.835 Y98.091 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X74.845 Y98.695 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.898 Y75.245 E1.50293 ; perimeter
G1 X46.592 Y74.950 E0.01749 ; perimeter
G1 X46.332 Y74.622 E0.01724 ; perimeter
G1 X46.119 Y74.260 E0.01729 ; perimeter
G1 X45.958 Y73.872 E0.01733 ; perimeter
G1 X45.849 Y73.461 E0.01752 ; perimeter
G1 X45.818 Y73.260 E0.00838 ; perimeter
G1 X45.795 Y72.838 E0.01739 ; perimeter
G1 X45.829 Y72.421 E0.01726 ; perimeter
G1 X45.920 Y72.011 E0.01730 ; perimeter
G1 X46.066 Y71.616 E0.01732 ; perimeter
G1 X46.265 Y71.245 E0.01734 ; perimeter
G1 X46.517 Y70.899 E0.01767 ; perimeter
G1 X47.674 Y69.520 E0.07412 ; perimeter
G1 X48.691 Y70.374 E0.05471 ; perimeter
G1 X47.687 Y71.571 E0.06438 ; perimeter
G1 X47.492 Y71.849 E0.01398 ; perimeter
G1 X47.344 Y72.166 E0.01439 ; perimeter
G1 X47.254 Y72.503 E0.01439 ; perimeter
G1 X47.224 Y72.851 E0.01439 ; perimeter
G1 X47.254 Y73.199 E0.01439 ; perimeter
G1 X47.344 Y73.537 E0.01439 ; perimeter
G1 X47.492 Y73.853 E0.01439 ; perimeter
G1 X47.692 Y74.139 E0.01439 ; perimeter
G1 X47.932 Y74.379 E0.01398 ; perimeter
G1 X75.699 Y97.678 E1.49319 ; perimeter
G1 X74.884 Y98.649 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X74.542 Y98.434 F10800.000 ; move inwards before travel
G1 F8640
G1 X72.359 Y96.538 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X173.137 Y92.059 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 P95 R6
M204 S800 ; adjust acceleration
G1 F2400
G1 X161.384 Y78.052 E0.75325 ; perimeter
G1 X161.549 Y77.914 E0.00888 ; perimeter
G1 X173.302 Y91.921 E0.75325 ; perimeter
G1 X173.183 Y92.021 E0.00641 ; perimeter
M204 S1000 ; adjust acceleration
G1 X173.018 Y92.534 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.895 Y78.087 E0.77692 ; perimeter
G1 X160.909 Y77.933 E0.00635 ; perimeter
G1 X161.598 Y77.355 E0.03705 ; perimeter
G1 X164.047 Y80.274 E0.15696 ; perimeter
G1 X164.607 Y79.804 E0.03013 ; perimeter
G1 X164.951 Y80.214 E0.02205 ; perimeter
G1 X164.391 Y80.684 E0.03013 ; perimeter
G1 X171.067 Y88.641 E0.42789 ; perimeter
G1 X171.628 Y88.171 E0.03013 ; perimeter
G1 X171.972 Y88.581 E0.02205 ; perimeter
G1 X171.411 Y89.051 E0.03013 ; perimeter
G1 X173.860 Y91.969 E0.15696 ; perimeter
G1 X173.172 Y92.547 E0.03705 ; perimeter
G1 X173.078 Y92.539 E0.00388 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.820 Y92.915 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.486 Y78.216 E0.79045 ; perimeter
G1 X160.528 Y77.735 E0.01988 ; perimeter
G1 X161.647 Y76.797 E0.06014 ; perimeter
G1 X164.096 Y79.716 E0.15696 ; perimeter
G1 X164.656 Y79.245 E0.03013 ; perimeter
G1 X165.510 Y80.263 E0.05471 ; perimeter
G1 X164.949 Y80.733 E0.03013 ; perimeter
G1 X171.116 Y88.082 E0.39523 ; perimeter
G1 X171.676 Y87.612 E0.03013 ; perimeter
G1 X172.530 Y88.630 E0.05471 ; perimeter
G1 X171.970 Y89.100 E0.03013 ; perimeter
G1 X174.419 Y92.018 E0.15696 ; perimeter
G1 X173.301 Y92.957 E0.06014 ; perimeter
G1 X172.880 Y92.920 E0.01741 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.775 Y92.517 F10800.000 ; move inwards before travel
G1 F8640
G1 X170.758 Y90.403 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y101.371 E0.02925 ; perimeter
G1 X170.060 Y101.371 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.02925 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.747 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y100.974 E0.05234 ; perimeter
G1 X170.456 Y100.974 E0.21040 ; perimeter
G1 X170.456 Y102.245 E0.05234 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.807 Y102.643 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.583 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y100.578 E0.07543 ; perimeter
G1 X170.853 Y100.578 E0.24306 ; perimeter
G1 X170.853 Y102.409 E0.07543 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.643 Y103.039 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.567 Y102.640 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.953 Y102.409 E-0.21581 ; wipe and retract
G1 X164.953 Y100.578 E-0.42281 ; wipe and retract
G1 X165.478 Y100.578 E-0.12138 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X166.263 Y102.131 ; move to first infill point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7570.1
G1 X166.061 Y101.929 E0.01413 ; infill
G1 X166.061 Y101.687 E0.01199 ; infill
G1 X166.491 Y101.687 E0.02125 ; infill
G1 X166.735 Y101.931 E0.01705 ; infill
G1 X167.408 Y101.931 E0.03324 ; infill
G1 X167.164 Y101.687 E0.01705 ; infill
G1 X167.836 Y101.687 E0.03324 ; infill
G1 X168.080 Y101.931 E0.01705 ; infill
G1 X168.753 Y101.931 E0.03324 ; infill
G1 X168.509 Y101.687 E0.01705 ; infill
G1 X169.181 Y101.687 E0.03324 ; infill
G1 X169.626 Y102.131 E0.03109 ; infill
G1 F8640
G1 X169.181 Y101.687 E-0.14524 ; wipe and retract
G1 X168.509 Y101.687 E-0.15529 ; wipe and retract
G1 X168.753 Y101.931 E-0.07965 ; wipe and retract
G1 X168.080 Y101.931 E-0.15529 ; wipe and retract
G1 X167.836 Y101.687 E-0.07965 ; wipe and retract
G1 X167.209 Y101.687 E-0.14487 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X175.204 Y98.137 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X174.860 Y97.727 E0.02205 ; perimeter
G1 X202.336 Y74.672 E1.47757 ; perimeter
G1 X202.612 Y74.395 E0.01613 ; perimeter
G1 X202.852 Y74.052 E0.01725 ; perimeter
G1 X203.029 Y73.673 E0.01725 ; perimeter
G1 X203.138 Y73.268 E0.01725 ; perimeter
G1 X203.174 Y72.851 E0.01725 ; perimeter
G1 X203.138 Y72.434 E0.01725 ; perimeter
G1 X203.029 Y72.030 E0.01725 ; perimeter
G1 X202.852 Y71.650 E0.01725 ; perimeter
G1 X202.628 Y71.330 E0.01612 ; perimeter
G1 X201.867 Y70.423 E0.04877 ; perimeter
G1 X202.277 Y70.079 E0.02205 ; perimeter
G1 X203.170 Y71.143 E0.05723 ; perimeter
G1 X203.399 Y71.457 E0.01599 ; perimeter
G1 X203.574 Y71.784 E0.01530 ; perimeter
G1 X203.634 Y71.938 E0.00681 ; perimeter
G1 X203.698 Y72.119 E0.00789 ; perimeter
G1 X203.778 Y72.480 E0.01524 ; perimeter
G1 X203.808 Y72.843 E0.01503 ; perimeter
G1 X203.787 Y73.218 E0.01547 ; perimeter
G1 X203.666 Y73.744 E0.02224 ; perimeter
G1 X203.523 Y74.087 E0.01530 ; perimeter
G1 X203.445 Y74.226 E0.00658 ; perimeter
G1 X203.343 Y74.394 E0.00810 ; perimeter
G1 X203.114 Y74.683 E0.01518 ; perimeter
G1 X202.837 Y74.950 E0.01582 ; perimeter
G1 X175.250 Y98.098 E1.48358 ; perimeter
M204 S1000 ; adjust acceleration
G1 X175.155 Y98.695 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X174.301 Y97.678 E0.05471 ; perimeter
G1 X202.068 Y74.379 E1.49319 ; perimeter
G1 X202.308 Y74.139 E0.01398 ; perimeter
G1 X202.508 Y73.853 E0.01439 ; perimeter
G1 X202.656 Y73.537 E0.01439 ; perimeter
G1 X202.746 Y73.199 E0.01439 ; perimeter
G1 X202.776 Y72.851 E0.01439 ; perimeter
G1 X202.746 Y72.503 E0.01439 ; perimeter
G1 X202.656 Y72.166 E0.01439 ; perimeter
G1 X202.508 Y71.849 E0.01439 ; perimeter
G1 X202.313 Y71.571 E0.01398 ; perimeter
G1 X201.309 Y70.374 E0.06438 ; perimeter
G1 X202.326 Y69.520 E0.05471 ; perimeter
G1 X203.483 Y70.899 E0.07412 ; perimeter
G1 X203.735 Y71.245 E0.01767 ; perimeter
G1 X203.935 Y71.618 E0.01741 ; perimeter
G1 X204.006 Y71.800 E0.00805 ; perimeter
G1 X204.080 Y72.009 E0.00914 ; perimeter
G1 X204.171 Y72.421 E0.01736 ; perimeter
G1 X204.205 Y72.838 E0.01726 ; perimeter
G1 X204.182 Y73.260 E0.01739 ; perimeter
G1 X204.151 Y73.461 E0.00838 ; perimeter
G1 X204.042 Y73.872 E0.01752 ; perimeter
G1 X203.880 Y74.262 E0.01741 ; perimeter
G1 X203.786 Y74.427 E0.00781 ; perimeter
G1 X203.669 Y74.621 E0.00935 ; perimeter
G1 X203.408 Y74.950 E0.01730 ; perimeter
G1 X203.102 Y75.245 E0.01749 ; perimeter
G1 X175.201 Y98.657 E1.50046 ; perimeter
M204 S1000 ; adjust acceleration
G1 X175.085 Y98.301 F10800.000 ; move inwards before travel
G1 F8640
G1 X174.301 Y97.678 E-0.30695 ; wipe and retract
G1 X175.804 Y96.417 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X200.954 Y68.718 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.670 Y65.996 E0.14635 ; perimeter
G1 X198.835 Y65.858 E0.00888 ; perimeter
G1 X201.119 Y68.579 E0.14635 ; perimeter
G1 X201.000 Y68.679 E0.00641 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X198.842 Y66.194 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X194.750 Y61.324 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X192.466 Y58.603 E0.14635 ; perimeter
G1 X192.631 Y58.464 E0.00888 ; perimeter
G1 X194.915 Y61.185 E0.14635 ; perimeter
G1 X194.796 Y61.286 E0.00641 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X192.638 Y58.800 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X200.905 Y69.276 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.456 Y66.358 E0.15696 ; perimeter
G1 X198.207 Y66.567 E0.01340 ; perimeter
G1 X197.863 Y66.157 E0.02205 ; perimeter
G1 X198.528 Y65.599 E0.03577 ; perimeter
G1 X195.117 Y61.533 E0.21861 ; perimeter
G1 X194.452 Y62.092 E0.03577 ; perimeter
G1 X194.108 Y61.681 E0.02205 ; perimeter
G1 X194.357 Y61.472 E0.01340 ; perimeter
G1 X191.908 Y58.554 E0.15696 ; perimeter
G1 X192.597 Y57.976 E0.03705 ; perimeter
G1 X192.750 Y57.989 E0.00635 ; perimeter
G1 X201.607 Y68.545 E0.56765 ; perimeter
G1 X201.594 Y68.698 E0.00635 ; perimeter
G1 X200.951 Y69.238 E0.03457 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.856 Y69.835 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.407 Y66.916 E0.15696 ; perimeter
G1 X198.158 Y67.125 E0.01340 ; perimeter
G1 X197.304 Y66.108 E0.05471 ; perimeter
G1 X197.969 Y65.550 E0.03577 ; perimeter
G1 X195.963 Y63.159 E0.12857 ; perimeter
G1 X195.068 Y62.092 E0.05739 ; perimeter
G1 X194.403 Y62.650 E0.03577 ; perimeter
G1 X193.549 Y61.633 E0.05471 ; perimeter
G1 X193.798 Y61.424 E0.01340 ; perimeter
G1 X191.349 Y58.505 E0.15696 ; perimeter
G1 X192.468 Y57.567 E0.06014 ; perimeter
G1 X192.948 Y57.609 E0.01988 ; perimeter
G1 X202.016 Y68.416 E0.58117 ; perimeter
G1 X201.974 Y68.896 E0.01988 ; perimeter
G1 X200.902 Y69.796 E0.05767 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.762 Y69.446 F10800.000 ; move inwards before travel
G1 F8640
G1 X198.747 Y67.308 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X160.226 Y76.553 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.882 Y76.143 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.16390 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X187.800 Y57.027 E1.06121 ; perimeter
G1 X188.099 Y56.808 E0.01527 ; perimeter
G1 X188.406 Y56.640 E0.01442 ; perimeter
G1 X188.732 Y56.513 E0.01443 ; perimeter
G1 X189.072 Y56.429 E0.01442 ; perimeter
G1 X189.420 Y56.391 E0.01443 ; perimeter
G1 X189.770 Y56.398 E0.01441 ; perimeter
G1 X190.116 Y56.451 E0.01443 ; perimeter
G1 X190.452 Y56.549 E0.01442 ; perimeter
G1 X190.775 Y56.691 E0.01452 ; perimeter
G1 X191.033 Y56.844 E0.01234 ; perimeter
G1 X191.331 Y57.084 E0.01578 ; perimeter
G1 X190.873 Y57.468 E0.02462 ; perimeter
G1 X190.672 Y57.325 E0.01016 ; perimeter
G1 X190.329 Y57.169 E0.01555 ; perimeter
G1 X189.844 Y57.049 E0.02057 ; perimeter
G1 X189.476 Y57.025 E0.01521 ; perimeter
G1 X189.231 Y57.046 E0.01010 ; perimeter
G1 X188.747 Y57.146 E0.02038 ; perimeter
G1 X188.279 Y57.361 E0.02121 ; perimeter
G1 X187.984 Y57.572 E0.01494 ; perimeter
G1 X168.261 Y74.121 E1.06063 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X160.272 Y76.514 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.177 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.323 Y76.094 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.18617 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X187.555 Y56.715 E1.05580 ; perimeter
G1 X187.885 Y56.473 E0.01687 ; perimeter
G1 X188.238 Y56.280 E0.01656 ; perimeter
G1 X188.612 Y56.134 E0.01656 ; perimeter
G1 X189.003 Y56.038 E0.01656 ; perimeter
G1 X189.403 Y55.994 E0.01657 ; perimeter
G1 X189.590 Y55.998 E0.00773 ; perimeter
G1 X189.804 Y56.003 E0.00883 ; perimeter
G1 X190.202 Y56.064 E0.01657 ; perimeter
G1 X190.588 Y56.176 E0.01656 ; perimeter
G1 X190.957 Y56.338 E0.01660 ; perimeter
G1 X191.255 Y56.515 E0.01428 ; perimeter
G1 X191.524 Y56.720 E0.01393 ; perimeter
G1 X191.910 Y57.115 E0.02278 ; perimeter
G1 X190.885 Y57.976 E0.05515 ; perimeter
G1 X190.474 Y57.670 E0.02110 ; perimeter
G1 X190.198 Y57.544 E0.01249 ; perimeter
G1 X189.783 Y57.442 E0.01760 ; perimeter
G1 X189.480 Y57.422 E0.01252 ; perimeter
G1 X189.289 Y57.439 E0.00790 ; perimeter
G1 X188.871 Y57.525 E0.01756 ; perimeter
G1 X188.479 Y57.706 E0.01781 ; perimeter
G1 X188.226 Y57.885 E0.01275 ; perimeter
G1 X168.405 Y74.517 E1.06592 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X160.223 Y77.073 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.159 Y76.712 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.323 Y76.094 E-0.30695 ; wipe and retract
G1 X160.826 Y74.833 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y139.517 E0.02925 ; perimeter
G1 X83.970 Y139.517 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.02925 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.968 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y139.120 E0.05234 ; perimeter
G1 X84.366 Y139.120 E0.21040 ; perimeter
G1 X84.366 Y140.391 E0.05234 ; perimeter
G1 X84.010 Y140.747 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.132 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y138.724 E0.07543 ; perimeter
G1 X84.762 Y138.724 E0.24305 ; perimeter
G1 X84.762 Y140.555 E0.07543 ; perimeter
G1 X84.175 Y141.143 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.804 Y140.957 F10800.000 ; move inwards before travel
G1 F8640
G1 X80.883 Y141.173 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X83.536 Y140.278 ; move to first infill point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7570.1
G1 X83.091 Y139.833 E0.03109 ; infill
G1 X82.419 Y139.833 E0.03324 ; infill
G1 X82.662 Y140.077 E0.01705 ; infill
G1 X81.990 Y140.077 E0.03324 ; infill
G1 X81.746 Y139.833 E0.01705 ; infill
G1 X81.073 Y139.833 E0.03324 ; infill
G1 X81.317 Y140.077 E0.01705 ; infill
G1 X80.645 Y140.077 E0.03324 ; infill
G1 X80.401 Y139.833 E0.01705 ; infill
G1 X79.971 Y139.833 E0.02125 ; infill
G1 X79.971 Y140.075 E0.01199 ; infill
G1 X80.173 Y140.278 E0.01413 ; infill
G1 F8640
G1 X79.971 Y140.075 E-0.06602 ; wipe and retract
G1 X79.971 Y139.833 E-0.05602 ; wipe and retract
G1 X80.401 Y139.833 E-0.09927 ; wipe and retract
G1 X80.645 Y140.077 E-0.07965 ; wipe and retract
G1 X81.317 Y140.077 E-0.15529 ; wipe and retract
G1 X81.073 Y139.833 E-0.07965 ; wipe and retract
G1 X81.746 Y139.833 E-0.15529 ; wipe and retract
G1 X81.957 Y140.043 E-0.06880 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X76.578 Y130.205 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X76.413 Y130.067 E0.00888 ; perimeter
G1 X88.166 Y116.060 E0.75325 ; perimeter
G1 X88.331 Y116.199 E0.00888 ; perimeter
G1 X76.617 Y130.159 E0.75078 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.697 Y130.680 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X76.543 Y130.694 E0.00635 ; perimeter
G1 X75.854 Y130.116 E0.03705 ; perimeter
G1 X78.303 Y127.197 E0.15696 ; perimeter
G1 X77.743 Y126.727 E0.03013 ; perimeter
G1 X78.087 Y126.317 E0.02205 ; perimeter
G1 X78.648 Y126.787 E0.03013 ; perimeter
G1 X85.324 Y118.830 E0.42789 ; perimeter
G1 X84.764 Y118.360 E0.03013 ; perimeter
G1 X85.108 Y117.950 E0.02205 ; perimeter
G1 X85.668 Y118.420 E0.03013 ; perimeter
G1 X88.117 Y115.502 E0.15696 ; perimeter
G1 X88.806 Y116.080 E0.03705 ; perimeter
G1 X88.819 Y116.233 E0.00635 ; perimeter
G1 X76.735 Y130.634 E0.77445 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.895 Y131.061 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X76.414 Y131.103 E0.01988 ; perimeter
G1 X75.296 Y130.164 E0.06014 ; perimeter
G1 X77.745 Y127.246 E0.15696 ; perimeter
G1 X77.185 Y126.776 E0.03013 ; perimeter
G1 X78.038 Y125.758 E0.05471 ; perimeter
G1 X78.599 Y126.229 E0.03013 ; perimeter
G1 X84.766 Y118.879 E0.39523 ; perimeter
G1 X84.205 Y118.409 E0.03013 ; perimeter
G1 X85.059 Y117.392 E0.05471 ; perimeter
G1 X85.619 Y117.862 E0.03013 ; perimeter
G1 X88.068 Y114.943 E0.15696 ; perimeter
G1 X89.186 Y115.881 E0.06014 ; perimeter
G1 X89.229 Y116.362 E0.01988 ; perimeter
G1 X76.934 Y131.015 E0.78798 ; perimeter
M204 S1000 ; adjust acceleration
G1 X76.587 Y130.805 F10800.000 ; move inwards before travel
G1 F8640
G1 X76.414 Y131.103 E-0.12161 ; wipe and retract
G1 X75.296 Y130.164 E-0.33707 ; wipe and retract
G1 X76.135 Y129.165 E-0.30132 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X89.489 Y114.699 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.15587 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X61.731 Y95.718 E1.06063 ; perimeter
G1 X61.436 Y95.508 E0.01494 ; perimeter
G1 X60.968 Y95.292 E0.02121 ; perimeter
G1 X60.483 Y95.192 E0.02038 ; perimeter
G1 X60.239 Y95.171 E0.01010 ; perimeter
G1 X59.871 Y95.195 E0.01521 ; perimeter
G1 X59.386 Y95.315 E0.02057 ; perimeter
G1 X59.043 Y95.471 E0.01555 ; perimeter
G1 X58.841 Y95.614 E0.01016 ; perimeter
G1 X58.382 Y95.229 E0.02469 ; perimeter
G1 X58.551 Y95.086 E0.00911 ; perimeter
G1 X58.949 Y94.833 E0.01941 ; perimeter
G1 X59.102 Y94.765 E0.00690 ; perimeter
G1 X59.262 Y94.695 E0.00721 ; perimeter
G1 X59.599 Y94.598 E0.01444 ; perimeter
G1 X59.945 Y94.545 E0.01442 ; perimeter
G1 X60.295 Y94.537 E0.01443 ; perimeter
G1 X60.488 Y94.558 E0.00801 ; perimeter
G1 X60.643 Y94.575 E0.00640 ; perimeter
G1 X60.983 Y94.659 E0.01443 ; perimeter
G1 X61.309 Y94.786 E0.01443 ; perimeter
G1 X61.616 Y94.954 E0.01443 ; perimeter
G1 X61.915 Y95.173 E0.01527 ; perimeter
G1 X81.649 Y111.732 E1.06121 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X89.833 Y114.289 E0.16390 ; perimeter
G1 X89.528 Y114.653 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.538 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.16626 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X61.488 Y96.031 E1.06592 ; perimeter
G1 X61.236 Y95.852 E0.01275 ; perimeter
G1 X60.843 Y95.671 E0.01781 ; perimeter
G1 X60.426 Y95.585 E0.01756 ; perimeter
G1 X60.235 Y95.568 E0.00790 ; perimeter
G1 X59.932 Y95.588 E0.01252 ; perimeter
G1 X59.517 Y95.691 E0.01760 ; perimeter
G1 X59.241 Y95.817 E0.01249 ; perimeter
G1 X58.830 Y96.122 E0.02110 ; perimeter
G1 X57.806 Y95.263 E0.05505 ; perimeter
G1 X58.053 Y94.988 E0.01520 ; perimeter
G1 X58.315 Y94.766 E0.01417 ; perimeter
G1 X58.761 Y94.482 E0.02177 ; perimeter
G1 X59.127 Y94.322 E0.01645 ; perimeter
G1 X59.513 Y94.210 E0.01657 ; perimeter
G1 X59.910 Y94.149 E0.01656 ; perimeter
G1 X60.312 Y94.140 E0.01656 ; perimeter
G1 X60.712 Y94.184 E0.01656 ; perimeter
G1 X61.102 Y94.280 E0.01657 ; perimeter
G1 X61.477 Y94.426 E0.01656 ; perimeter
G1 X61.830 Y94.619 E0.01657 ; perimeter
G1 X62.160 Y94.861 E0.01687 ; perimeter
G1 X81.793 Y111.335 E1.05580 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X90.392 Y114.240 E0.18617 ; perimeter
G1 X89.577 Y115.212 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.257 Y114.972 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.024 Y113.134 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X48.761 Y106.864 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.596 Y106.725 E0.00888 ; perimeter
G1 X50.879 Y104.004 E0.14635 ; perimeter
G1 X51.045 Y104.143 E0.00888 ; perimeter
G1 X48.800 Y106.818 E0.14388 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X48.596 Y106.725 E-0.05168 ; wipe and retract
G1 X50.568 Y104.376 E-0.70832 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X54.965 Y99.470 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X54.800 Y99.332 E0.00888 ; perimeter
G1 X57.084 Y96.610 E0.14635 ; perimeter
G1 X57.249 Y96.749 E0.00888 ; perimeter
G1 X55.004 Y99.424 E0.14388 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X54.800 Y99.332 E-0.05168 ; wipe and retract
G1 X56.772 Y96.982 E-0.70832 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X48.810 Y107.422 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X48.121 Y106.844 E0.03705 ; perimeter
G1 X48.107 Y106.691 E0.00635 ; perimeter
G1 X56.965 Y96.135 E0.56765 ; perimeter
G1 X57.118 Y96.122 E0.00635 ; perimeter
G1 X57.807 Y96.700 E0.03705 ; perimeter
G1 X55.358 Y99.619 E0.15696 ; perimeter
G1 X55.607 Y99.828 E0.01340 ; perimeter
G1 X55.263 Y100.238 E0.02205 ; perimeter
G1 X54.598 Y99.680 E0.03577 ; perimeter
G1 X51.187 Y103.745 E0.21861 ; perimeter
G1 X51.852 Y104.303 E0.03577 ; perimeter
G1 X51.508 Y104.713 E0.02205 ; perimeter
G1 X51.259 Y104.504 E0.01340 ; perimeter
G1 X48.848 Y107.377 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X48.859 Y107.981 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X47.740 Y107.043 E0.06014 ; perimeter
G1 X47.698 Y106.562 E0.01988 ; perimeter
G1 X56.767 Y95.755 E0.58117 ; perimeter
G1 X57.247 Y95.713 E0.01988 ; perimeter
G1 X58.365 Y96.651 E0.06014 ; perimeter
G1 X55.916 Y99.570 E0.15696 ; perimeter
G1 X56.166 Y99.779 E0.01340 ; perimeter
G1 X55.312 Y100.796 E0.05471 ; perimeter
G1 X54.647 Y100.238 E0.03577 ; perimeter
G1 X51.745 Y103.696 E0.18596 ; perimeter
G1 X52.410 Y104.254 E0.03577 ; perimeter
G1 X51.557 Y105.271 E0.05471 ; perimeter
G1 X51.308 Y105.062 E0.01340 ; perimeter
G1 X48.897 Y107.935 E0.15448 ; perimeter
M204 S1000 ; adjust acceleration
G1 X48.733 Y107.601 F10800.000 ; move inwards before travel
G1 F8640
G1 X47.740 Y107.043 E-0.33736 ; wipe and retract
G1 X47.698 Y106.562 E-0.11142 ; wipe and retract
G1 X48.565 Y105.529 E-0.31123 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X74.511 Y136.283 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X46.878 Y113.096 E1.48605 ; perimeter
G1 X46.601 Y112.829 E0.01582 ; perimeter
G1 X46.375 Y112.544 E0.01501 ; perimeter
G1 X46.190 Y112.229 E0.01505 ; perimeter
G1 X46.049 Y111.891 E0.01509 ; perimeter
G1 X45.928 Y111.365 E0.02224 ; perimeter
G1 X45.907 Y110.990 E0.01547 ; perimeter
G1 X45.937 Y110.626 E0.01503 ; perimeter
G1 X46.016 Y110.269 E0.01506 ; perimeter
G1 X46.143 Y109.926 E0.01508 ; perimeter
G1 X46.316 Y109.603 E0.01510 ; perimeter
G1 X46.545 Y109.289 E0.01599 ; perimeter
G1 X47.438 Y108.225 E0.05723 ; perimeter
G1 X47.848 Y108.569 E0.02205 ; perimeter
G1 X47.087 Y109.476 E0.04877 ; perimeter
G1 X46.862 Y109.796 E0.01612 ; perimeter
G1 X46.685 Y110.176 E0.01725 ; perimeter
G1 X46.577 Y110.580 E0.01725 ; perimeter
G1 X46.541 Y110.997 E0.01725 ; perimeter
G1 X46.577 Y111.414 E0.01725 ; perimeter
G1 X46.685 Y111.819 E0.01725 ; perimeter
G1 X46.862 Y112.198 E0.01725 ; perimeter
G1 X47.102 Y112.541 E0.01725 ; perimeter
G1 X47.379 Y112.818 E0.01612 ; perimeter
G1 X74.855 Y135.873 E1.47757 ; perimeter
G1 X74.549 Y136.237 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X74.560 Y136.841 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.612 Y113.391 E1.50293 ; perimeter
G1 X46.306 Y113.096 E0.01749 ; perimeter
G1 X46.047 Y112.768 E0.01724 ; perimeter
G1 X45.834 Y112.406 E0.01729 ; perimeter
G1 X45.672 Y112.018 E0.01733 ; perimeter
G1 X45.564 Y111.607 E0.01752 ; perimeter
G1 X45.533 Y111.406 E0.00838 ; perimeter
G1 X45.510 Y110.984 E0.01739 ; perimeter
G1 X45.544 Y110.567 E0.01726 ; perimeter
G1 X45.635 Y110.157 E0.01730 ; perimeter
G1 X45.781 Y109.763 E0.01732 ; perimeter
G1 X45.980 Y109.392 E0.01734 ; perimeter
G1 X46.232 Y109.045 E0.01767 ; perimeter
G1 X47.389 Y107.667 E0.07412 ; perimeter
G1 X48.406 Y108.520 E0.05471 ; perimeter
G1 X47.402 Y109.717 E0.06438 ; perimeter
G1 X47.207 Y109.995 E0.01398 ; perimeter
G1 X47.059 Y110.312 E0.01439 ; perimeter
G1 X46.969 Y110.649 E0.01439 ; perimeter
G1 X46.938 Y110.997 E0.01439 ; perimeter
G1 X46.969 Y111.345 E0.01439 ; perimeter
G1 X47.059 Y111.683 E0.01439 ; perimeter
G1 X47.207 Y111.999 E0.01439 ; perimeter
G1 X47.407 Y112.285 E0.01439 ; perimeter
G1 X47.647 Y112.525 E0.01398 ; perimeter
G1 X75.413 Y135.824 E1.49319 ; perimeter
G1 X74.598 Y136.795 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X74.257 Y136.580 F10800.000 ; move inwards before travel
G1 F8640
G1 X72.073 Y134.684 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X172.852 Y130.205 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X161.099 Y116.199 E0.75325 ; perimeter
G1 X161.264 Y116.060 E0.00888 ; perimeter
G1 X173.017 Y130.067 E0.75325 ; perimeter
G1 X172.898 Y130.167 E0.00641 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.733 Y130.680 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F4800
G1 X160.610 Y116.233 E0.77692 ; perimeter
G1 X160.624 Y116.080 E0.00635 ; perimeter
G1 X161.313 Y115.502 E0.03705 ; perimeter
G1 X163.762 Y118.420 E0.15696 ; perimeter
G1 X164.322 Y117.950 E0.03013 ; perimeter
G1 X164.666 Y118.360 E0.02205 ; perimeter
G1 X164.106 Y118.830 E0.03013 ; perimeter
G1 X170.782 Y126.787 E0.42789 ; perimeter
G1 X171.342 Y126.317 E0.03013 ; perimeter
G1 X171.686 Y126.727 E0.02205 ; perimeter
G1 X171.126 Y127.197 E0.03013 ; perimeter
G1 X173.575 Y130.116 E0.15696 ; perimeter
G1 X172.886 Y130.694 E0.03705 ; perimeter
G1 X172.793 Y130.685 E0.00388 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.535 Y131.061 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X160.201 Y116.362 E0.79045 ; perimeter
G1 X160.243 Y115.881 E0.01988 ; perimeter
G1 X161.361 Y114.943 E0.06014 ; perimeter
G1 X163.810 Y117.862 E0.15696 ; perimeter
G1 X164.371 Y117.392 E0.03013 ; perimeter
G1 X165.224 Y118.409 E0.05471 ; perimeter
G1 X164.664 Y118.879 E0.03013 ; perimeter
G1 X170.831 Y126.229 E0.39523 ; perimeter
G1 X171.391 Y125.758 E0.03013 ; perimeter
G1 X172.245 Y126.776 E0.05471 ; perimeter
G1 X171.685 Y127.246 E0.03013 ; perimeter
G1 X174.134 Y130.164 E0.15696 ; perimeter
G1 X173.015 Y131.103 E0.06014 ; perimeter
G1 X172.594 Y131.066 E0.01741 ; perimeter
M204 S1000 ; adjust acceleration
G1 X172.490 Y130.663 F10800.000 ; move inwards before travel
G1 F8640
G1 X170.473 Y128.549 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y139.517 E0.02925 ; perimeter
G1 X169.775 Y139.517 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.02925 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.462 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y139.120 E0.05234 ; perimeter
G1 X170.171 Y139.120 E0.21040 ; perimeter
G1 X170.171 Y140.391 E0.05234 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.522 Y140.789 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.298 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y138.724 E0.07543 ; perimeter
G1 X170.567 Y138.724 E0.24306 ; perimeter
G1 X170.567 Y140.555 E0.07543 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.358 Y141.185 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.282 Y140.786 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.667 Y140.555 E-0.21581 ; wipe and retract
G1 X164.667 Y138.724 E-0.42281 ; wipe and retract
G1 X165.193 Y138.724 E-0.12138 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X165.978 Y140.278 ; move to first infill point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
G1 F7570.1
G1 X165.776 Y140.075 E0.01413 ; infill
G1 X165.776 Y139.833 E0.01199 ; infill
G1 X166.206 Y139.833 E0.02125 ; infill
G1 X166.450 Y140.077 E0.01705 ; infill
G1 X167.122 Y140.077 E0.03324 ; infill
G1 X166.879 Y139.833 E0.01705 ; infill
G1 X167.551 Y139.833 E0.03324 ; infill
G1 X167.795 Y140.077 E0.01705 ; infill
G1 X168.468 Y140.077 E0.03324 ; infill
G1 X168.224 Y139.833 E0.01705 ; infill
G1 X168.896 Y139.833 E0.03324 ; infill
G1 X169.341 Y140.278 E0.03109 ; infill
G1 F8640
G1 X168.896 Y139.833 E-0.14524 ; wipe and retract
G1 X168.224 Y139.833 E-0.15529 ; wipe and retract
G1 X168.468 Y140.077 E-0.07965 ; wipe and retract
G1 X167.795 Y140.077 E-0.15529 ; wipe and retract
G1 X167.551 Y139.833 E-0.07965 ; wipe and retract
G1 X166.924 Y139.833 E-0.14487 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X174.919 Y136.283 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X174.575 Y135.873 E0.02205 ; perimeter
G1 X202.050 Y112.818 E1.47757 ; perimeter
G1 X202.327 Y112.541 E0.01613 ; perimeter
G1 X202.567 Y112.198 E0.01725 ; perimeter
G1 X202.744 Y111.819 E0.01725 ; perimeter
G1 X202.853 Y111.414 E0.01725 ; perimeter
G1 X202.889 Y110.997 E0.01725 ; perimeter
G1 X202.853 Y110.580 E0.01725 ; perimeter
G1 X202.744 Y110.176 E0.01725 ; perimeter
G1 X202.567 Y109.796 E0.01725 ; perimeter
G1 X202.343 Y109.476 E0.01612 ; perimeter
G1 X201.582 Y108.569 E0.04877 ; perimeter
G1 X201.992 Y108.225 E0.02205 ; perimeter
G1 X202.885 Y109.289 E0.05723 ; perimeter
G1 X203.113 Y109.603 E0.01599 ; perimeter
G1 X203.289 Y109.930 E0.01530 ; perimeter
G1 X203.349 Y110.084 E0.00681 ; perimeter
G1 X203.413 Y110.265 E0.00789 ; perimeter
G1 X203.493 Y110.626 E0.01524 ; perimeter
G1 X203.523 Y110.990 E0.01503 ; perimeter
G1 X203.502 Y111.365 E0.01547 ; perimeter
G1 X203.381 Y111.891 E0.02224 ; perimeter
G1 X203.238 Y112.233 E0.01530 ; perimeter
G1 X203.159 Y112.372 E0.00658 ; perimeter
G1 X203.057 Y112.540 E0.00810 ; perimeter
G1 X202.829 Y112.829 E0.01518 ; perimeter
G1 X202.552 Y113.096 E0.01582 ; perimeter
G1 X174.965 Y136.244 E1.48358 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.870 Y136.841 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X174.016 Y135.824 E0.05471 ; perimeter
G1 X201.782 Y112.525 E1.49319 ; perimeter
G1 X202.022 Y112.285 E0.01398 ; perimeter
G1 X202.223 Y111.999 E0.01439 ; perimeter
G1 X202.370 Y111.683 E0.01439 ; perimeter
G1 X202.461 Y111.345 E0.01439 ; perimeter
G1 X202.491 Y110.997 E0.01439 ; perimeter
G1 X202.461 Y110.649 E0.01439 ; perimeter
G1 X202.370 Y110.312 E0.01439 ; perimeter
G1 X202.223 Y109.995 E0.01439 ; perimeter
G1 X202.028 Y109.717 E0.01398 ; perimeter
G1 X201.024 Y108.520 E0.06438 ; perimeter
G1 X202.041 Y107.667 E0.05471 ; perimeter
G1 X203.197 Y109.045 E0.07412 ; perimeter
G1 X203.450 Y109.392 E0.01767 ; perimeter
G1 X203.650 Y109.764 E0.01741 ; perimeter
G1 X203.720 Y109.946 E0.00805 ; perimeter
G1 X203.795 Y110.155 E0.00914 ; perimeter
G1 X203.886 Y110.567 E0.01736 ; perimeter
G1 X203.920 Y110.984 E0.01726 ; perimeter
G1 X203.897 Y111.406 E0.01739 ; perimeter
G1 X203.866 Y111.607 E0.00838 ; perimeter
G1 X203.757 Y112.018 E0.01752 ; perimeter
G1 X203.595 Y112.408 E0.01741 ; perimeter
G1 X203.501 Y112.573 E0.00781 ; perimeter
G1 X203.384 Y112.767 E0.00935 ; perimeter
G1 X203.123 Y113.096 E0.01730 ; perimeter
G1 X202.817 Y113.391 E0.01749 ; perimeter
G1 X174.916 Y136.803 E1.50046 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.800 Y136.447 F10800.000 ; move inwards before travel
G1 F8640
G1 X174.016 Y135.824 E-0.30695 ; wipe and retract
G1 X175.519 Y134.563 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X200.669 Y106.864 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.385 Y104.143 E0.14635 ; perimeter
G1 X198.550 Y104.004 E0.00888 ; perimeter
G1 X200.834 Y106.725 E0.14635 ; perimeter
G1 X200.715 Y106.826 E0.00641 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X198.557 Y104.340 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X194.465 Y99.470 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X192.181 Y96.749 E0.14635 ; perimeter
G1 X192.346 Y96.610 E0.00888 ; perimeter
G1 X194.630 Y99.332 E0.14635 ; perimeter
G1 X194.510 Y99.432 E0.00641 ; perimeter
M204 S1000 ; adjust acceleration
G1 F8640
G1 X192.352 Y96.946 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
G1 X200.620 Y107.422 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.171 Y104.504 E0.15696 ; perimeter
G1 X197.922 Y104.713 E0.01340 ; perimeter
G1 X197.578 Y104.303 E0.02205 ; perimeter
G1 X198.243 Y103.745 E0.03577 ; perimeter
G1 X194.832 Y99.680 E0.21861 ; perimeter
G1 X194.166 Y100.238 E0.03577 ; perimeter
G1 X193.822 Y99.828 E0.02205 ; perimeter
G1 X194.072 Y99.619 E0.01340 ; perimeter
G1 X191.623 Y96.700 E0.15696 ; perimeter
G1 X192.311 Y96.122 E0.03705 ; perimeter
G1 X192.465 Y96.135 E0.00635 ; perimeter
G1 X201.322 Y106.691 E0.56765 ; perimeter
G1 X201.309 Y106.844 E0.00635 ; perimeter
G1 X200.666 Y107.384 E0.03457 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.571 Y107.981 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X198.122 Y105.062 E0.15696 ; perimeter
G1 X197.873 Y105.271 E0.01340 ; perimeter
G1 X197.019 Y104.254 E0.05471 ; perimeter
G1 X197.684 Y103.696 E0.03577 ; perimeter
G1 X195.678 Y101.305 E0.12857 ; perimeter
G1 X194.783 Y100.238 E0.05739 ; perimeter
G1 X194.118 Y100.796 E0.03577 ; perimeter
G1 X193.264 Y99.779 E0.05471 ; perimeter
G1 X193.513 Y99.570 E0.01340 ; perimeter
G1 X191.064 Y96.651 E0.15696 ; perimeter
G1 X192.182 Y95.713 E0.06014 ; perimeter
G1 X192.663 Y95.755 E0.01988 ; perimeter
G1 X201.731 Y106.562 E0.58117 ; perimeter
G1 X201.689 Y107.043 E0.01988 ; perimeter
G1 X200.617 Y107.942 E0.05767 ; perimeter
M204 S1000 ; adjust acceleration
G1 X200.477 Y107.592 F10800.000 ; move inwards before travel
G1 F8640
G1 X198.462 Y105.455 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
M73 Q95 S6
G1 Z22.350 F10800.000 ; lift Z
G1 X159.940 Y114.699 ; move to first perimeter point
G1 Z21.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.596 Y114.289 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.16390 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X187.515 Y95.173 E1.06121 ; perimeter
G1 X187.813 Y94.954 E0.01527 ; perimeter
G1 X188.120 Y94.786 E0.01442 ; perimeter
G1 X188.447 Y94.659 E0.01443 ; perimeter
G1 X188.787 Y94.575 E0.01442 ; perimeter
G1 X189.135 Y94.537 E0.01443 ; perimeter
G1 X189.485 Y94.544 E0.01441 ; perimeter
G1 X189.831 Y94.598 E0.01443 ; perimeter
G1 X190.167 Y94.695 E0.01442 ; perimeter
G1 X190.490 Y94.837 E0.01452 ; perimeter
G1 X190.747 Y94.990 E0.01234 ; perimeter
G1 X191.046 Y95.230 E0.01578 ; perimeter
G1 X190.588 Y95.614 E0.02462 ; perimeter
G1 X190.387 Y95.471 E0.01016 ; perimeter
G1 X190.044 Y95.315 E0.01555 ; perimeter
G1 X189.559 Y95.195 E0.02057 ; perimeter
G1 X189.190 Y95.171 E0.01521 ; perimeter
G1 X188.946 Y95.192 E0.01010 ; perimeter
G1 X188.462 Y95.292 E0.02038 ; perimeter
G1 X187.994 Y95.508 E0.02121 ; perimeter
G1 X187.699 Y95.718 E0.01494 ; perimeter
G1 X167.976 Y112.267 E1.06063 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.986 Y114.661 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.892 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.038 Y114.240 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.18617 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X187.270 Y94.861 E1.05580 ; perimeter
G1 X187.600 Y94.619 E0.01687 ; perimeter
G1 X187.952 Y94.426 E0.01656 ; perimeter
G1 X188.327 Y94.280 E0.01656 ; perimeter
G1 X188.718 Y94.184 E0.01656 ; perimeter
G1 X189.117 Y94.140 E0.01657 ; perimeter
G1 X189.305 Y94.144 E0.00773 ; perimeter
G1 X189.519 Y94.149 E0.00883 ; perimeter
G1 X189.917 Y94.210 E0.01657 ; perimeter
G1 X190.303 Y94.322 E0.01656 ; perimeter
G1 X190.672 Y94.484 E0.01660 ; perimeter
G1 X190.970 Y94.661 E0.01428 ; perimeter
G1 X191.239 Y94.866 E0.01393 ; perimeter
G1 X191.625 Y95.261 E0.02278 ; perimeter
G1 X190.600 Y96.122 E0.05515 ; perimeter
G1 X190.188 Y95.817 E0.02110 ; perimeter
G1 X189.913 Y95.691 E0.01249 ; perimeter
G1 X189.498 Y95.588 E0.01760 ; perimeter
G1 X189.195 Y95.568 E0.01252 ; perimeter
G1 X189.004 Y95.585 E0.00790 ; perimeter
G1 X188.586 Y95.671 E0.01756 ; perimeter
G1 X188.193 Y95.852 E0.01781 ; perimeter
G1 X187.941 Y96.031 E0.01275 ; perimeter
G1 X168.120 Y112.663 E1.06592 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X159.938 Y115.219 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.874 Y114.858 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;22


G1 F8640
G1 X159.038 Y114.240 E-0.30695 ; wipe and retract
G1 X160.541 Y112.979 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;22
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z22.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y101.515 E0.02331 ; perimeter
G1 X84.255 Y101.515 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.02331 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.253 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y101.119 E0.04640 ; perimeter
G1 X84.651 Y101.119 E0.21040 ; perimeter
G1 X84.651 Y102.245 E0.04640 ; perimeter
G1 X84.296 Y102.600 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.417 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y100.722 E0.06949 ; perimeter
G1 X85.047 Y100.722 E0.24305 ; perimeter
G1 X85.047 Y102.409 E0.06949 ; perimeter
G1 X84.460 Y102.997 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.090 Y102.809 F10800.000 ; move inwards before travel
G1 F8640
G1 X81.168 Y103.027 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.600 F10800.000 ; lift Z
G1 X74.605 Y97.976 ; move to first perimeter point
G1 Z22.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 P96 R5
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.163 Y74.950 E1.47574 ; perimeter
G1 X46.884 Y74.682 E0.01592 ; perimeter
G1 X46.658 Y74.394 E0.01509 ; perimeter
G1 X46.472 Y74.077 E0.01513 ; perimeter
G1 X46.331 Y73.737 E0.01516 ; perimeter
G1 X46.214 Y73.231 E0.02141 ; perimeter
G1 X46.192 Y72.852 E0.01561 ; perimeter
G1 X46.221 Y72.487 E0.01510 ; perimeter
G1 X46.299 Y72.128 E0.01513 ; perimeter
G1 X46.427 Y71.783 E0.01515 ; perimeter
G1 X46.600 Y71.458 E0.01517 ; perimeter
G1 X46.830 Y71.143 E0.01606 ; perimeter
G1 X47.723 Y70.079 E0.05723 ; perimeter
G1 X48.133 Y70.423 E0.02205 ; perimeter
G1 X47.372 Y71.330 E0.04877 ; perimeter
G1 X47.148 Y71.650 E0.01612 ; perimeter
G1 X46.971 Y72.030 E0.01725 ; perimeter
G1 X46.862 Y72.434 E0.01725 ; perimeter
G1 X46.826 Y72.851 E0.01725 ; perimeter
G1 X46.862 Y73.268 E0.01725 ; perimeter
G1 X46.971 Y73.673 E0.01725 ; perimeter
G1 X47.148 Y74.052 E0.01725 ; perimeter
G1 X47.388 Y74.395 E0.01725 ; perimeter
G1 X47.664 Y74.672 E0.01612 ; perimeter
G1 X74.949 Y97.566 E1.46727 ; perimeter
G1 X74.643 Y97.930 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X74.653 Y98.534 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.898 Y75.245 E1.49263 ; perimeter
G1 X46.590 Y74.948 E0.01759 ; perimeter
G1 X46.330 Y74.618 E0.01733 ; perimeter
G1 X46.116 Y74.254 E0.01738 ; perimeter
G1 X45.955 Y73.863 E0.01741 ; perimeter
G1 X45.847 Y73.450 E0.01761 ; perimeter
G1 X45.820 Y73.273 E0.00738 ; perimeter
G1 X45.795 Y72.848 E0.01751 ; perimeter
G1 X45.828 Y72.429 E0.01735 ; perimeter
G1 X45.918 Y72.016 E0.01738 ; perimeter
G1 X46.064 Y71.620 E0.01741 ; perimeter
G1 X46.264 Y71.247 E0.01742 ; perimeter
G1 X46.517 Y70.899 E0.01775 ; perimeter
G1 X47.674 Y69.520 E0.07412 ; perimeter
G1 X48.691 Y70.374 E0.05471 ; perimeter
G1 X47.687 Y71.571 E0.06438 ; perimeter
G1 X47.492 Y71.849 E0.01398 ; perimeter
G1 X47.344 Y72.166 E0.01439 ; perimeter
G1 X47.254 Y72.503 E0.01439 ; perimeter
G1 X47.224 Y72.851 E0.01439 ; perimeter
G1 X47.254 Y73.199 E0.01439 ; perimeter
G1 X47.344 Y73.537 E0.01439 ; perimeter
G1 X47.492 Y73.853 E0.01439 ; perimeter
G1 X47.692 Y74.139 E0.01439 ; perimeter
G1 X47.932 Y74.379 E0.01398 ; perimeter
G1 X75.507 Y97.517 E1.48289 ; perimeter
G1 X74.692 Y98.488 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X74.350 Y98.274 F10800.000 ; move inwards before travel
G1 F8640
G1 X72.167 Y96.377 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.600 F10800.000 ; lift Z
G1 X89.774 Y76.553 ; move to first perimeter point
G1 Z22.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.15587 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X62.016 Y57.572 E1.06062 ; perimeter
G1 X61.725 Y57.364 E0.01476 ; perimeter
G1 X61.259 Y57.150 E0.02112 ; perimeter
G1 X60.890 Y57.057 E0.01568 ; perimeter
G1 X60.529 Y57.025 E0.01490 ; perimeter
G1 X60.166 Y57.047 E0.01501 ; perimeter
G1 X59.671 Y57.169 E0.02097 ; perimeter
G1 X59.332 Y57.323 E0.01534 ; perimeter
G1 X59.127 Y57.468 E0.01035 ; perimeter
G1 X58.669 Y57.084 E0.02465 ; perimeter
G1 X58.972 Y56.841 E0.01599 ; perimeter
G1 X59.225 Y56.691 E0.01213 ; perimeter
G1 X59.548 Y56.549 E0.01453 ; perimeter
G1 X59.884 Y56.451 E0.01442 ; perimeter
G1 X60.230 Y56.398 E0.01442 ; perimeter
G1 X60.580 Y56.391 E0.01443 ; perimeter
G1 X60.748 Y56.409 E0.00694 ; perimeter
G1 X60.928 Y56.429 E0.00747 ; perimeter
G1 X61.268 Y56.513 E0.01443 ; perimeter
G1 X61.595 Y56.640 E0.01442 ; perimeter
G1 X61.901 Y56.808 E0.01443 ; perimeter
G1 X62.200 Y57.027 E0.01527 ; perimeter
G1 X81.934 Y73.586 E1.06121 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.118 Y76.143 E0.16390 ; perimeter
G1 X89.813 Y76.507 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.823 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.16626 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X61.774 Y57.885 E1.06592 ; perimeter
G1 X61.525 Y57.708 E0.01257 ; perimeter
G1 X61.127 Y57.525 E0.01805 ; perimeter
G1 X60.823 Y57.449 E0.01289 ; perimeter
G1 X60.524 Y57.422 E0.01239 ; perimeter
G1 X60.225 Y57.441 E0.01231 ; perimeter
G1 X59.801 Y57.545 E0.01798 ; perimeter
G1 X59.530 Y57.668 E0.01227 ; perimeter
G1 X59.115 Y57.976 E0.02129 ; perimeter
G1 X58.090 Y57.115 E0.05512 ; perimeter
G1 X58.252 Y56.931 E0.01012 ; perimeter
G1 X58.486 Y56.711 E0.01320 ; perimeter
G1 X58.750 Y56.511 E0.01366 ; perimeter
G1 X59.043 Y56.337 E0.01404 ; perimeter
G1 X59.412 Y56.176 E0.01660 ; perimeter
G1 X59.798 Y56.063 E0.01656 ; perimeter
G1 X60.196 Y56.003 E0.01656 ; perimeter
G1 X60.598 Y55.994 E0.01656 ; perimeter
G1 X60.997 Y56.038 E0.01656 ; perimeter
G1 X61.388 Y56.134 E0.01656 ; perimeter
G1 X61.762 Y56.280 E0.01656 ; perimeter
G1 X62.115 Y56.473 E0.01656 ; perimeter
G1 X62.445 Y56.715 E0.01687 ; perimeter
G1 X82.078 Y73.189 E1.05580 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X90.677 Y76.094 E0.18617 ; perimeter
G1 X89.862 Y77.065 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.543 Y76.826 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.309 Y74.987 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.600 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z22.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y101.515 E0.02331 ; perimeter
G1 X170.060 Y101.515 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.02331 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.747 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y101.119 E0.04640 ; perimeter
G1 X170.456 Y101.119 E0.21040 ; perimeter
G1 X170.456 Y102.245 E0.04640 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.807 Y102.643 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.583 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y100.722 E0.06949 ; perimeter
G1 X170.853 Y100.722 E0.24306 ; perimeter
G1 X170.853 Y102.409 E0.06949 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.643 Y103.039 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.567 Y102.640 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.953 Y102.409 E-0.21581 ; wipe and retract
G1 X164.953 Y100.722 E-0.38948 ; wipe and retract
G1 X165.623 Y100.722 E-0.15471 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.600 F10800.000 ; lift Z
G1 X175.395 Y97.976 ; move to first perimeter point
G1 Z22.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X175.051 Y97.566 E0.02205 ; perimeter
G1 X202.336 Y74.672 E1.46727 ; perimeter
G1 X202.612 Y74.395 E0.01613 ; perimeter
G1 X202.852 Y74.052 E0.01725 ; perimeter
G1 X203.029 Y73.673 E0.01725 ; perimeter
G1 X203.138 Y73.268 E0.01725 ; perimeter
G1 X203.174 Y72.851 E0.01725 ; perimeter
G1 X203.138 Y72.434 E0.01725 ; perimeter
G1 X203.029 Y72.030 E0.01725 ; perimeter
G1 X202.852 Y71.650 E0.01725 ; perimeter
G1 X202.628 Y71.330 E0.01612 ; perimeter
G1 X201.867 Y70.423 E0.04877 ; perimeter
G1 X202.277 Y70.079 E0.02205 ; perimeter
G1 X203.170 Y71.143 E0.05723 ; perimeter
G1 X203.400 Y71.458 E0.01606 ; perimeter
G1 X203.627 Y71.920 E0.02121 ; perimeter
G1 X203.700 Y72.124 E0.00893 ; perimeter
G1 X203.779 Y72.487 E0.01529 ; perimeter
G1 X203.808 Y72.852 E0.01510 ; perimeter
G1 X203.786 Y73.231 E0.01561 ; perimeter
G1 X203.669 Y73.737 E0.02141 ; perimeter
G1 X203.526 Y74.081 E0.01535 ; perimeter
G1 X203.433 Y74.245 E0.00775 ; perimeter
G1 X203.345 Y74.390 E0.00699 ; perimeter
G1 X203.116 Y74.682 E0.01529 ; perimeter
G1 X202.837 Y74.950 E0.01592 ; perimeter
G1 X175.441 Y97.937 E1.47327 ; perimeter
M204 S1000 ; adjust acceleration
G1 X175.347 Y98.534 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X174.493 Y97.517 E0.05471 ; perimeter
G1 X202.068 Y74.379 E1.48289 ; perimeter
G1 X202.308 Y74.139 E0.01398 ; perimeter
G1 X202.508 Y73.853 E0.01439 ; perimeter
G1 X202.656 Y73.537 E0.01439 ; perimeter
G1 X202.746 Y73.199 E0.01439 ; perimeter
G1 X202.776 Y72.851 E0.01439 ; perimeter
G1 X202.746 Y72.503 E0.01439 ; perimeter
G1 X202.656 Y72.166 E0.01439 ; perimeter
G1 X202.508 Y71.849 E0.01439 ; perimeter
G1 X202.313 Y71.571 E0.01398 ; perimeter
G1 X201.309 Y70.374 E0.06438 ; perimeter
G1 X202.326 Y69.520 E0.05471 ; perimeter
G1 X203.483 Y70.899 E0.07412 ; perimeter
G1 X203.736 Y71.247 E0.01775 ; perimeter
G1 X203.937 Y71.622 E0.01750 ; perimeter
G1 X203.999 Y71.782 E0.00708 ; perimeter
G1 X204.082 Y72.015 E0.01019 ; perimeter
G1 X204.172 Y72.429 E0.01744 ; perimeter
G1 X204.205 Y72.848 E0.01735 ; perimeter
G1 X204.180 Y73.273 E0.01751 ; perimeter
G1 X204.153 Y73.450 E0.00738 ; perimeter
G1 X204.045 Y73.863 E0.01761 ; perimeter
G1 X203.883 Y74.255 E0.01748 ; perimeter
G1 X203.775 Y74.446 E0.00901 ; perimeter
G1 X203.671 Y74.617 E0.00823 ; perimeter
G1 X203.410 Y74.948 E0.01740 ; perimeter
G1 X203.102 Y75.245 E0.01759 ; perimeter
G1 X175.393 Y98.496 E1.49016 ; perimeter
M204 S1000 ; adjust acceleration
G1 X175.277 Y98.141 F10800.000 ; move inwards before travel
G1 F8640
G1 X174.493 Y97.517 E-0.30695 ; wipe and retract
G1 X175.996 Y96.256 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.600 F10800.000 ; lift Z
G1 X160.226 Y76.553 ; move to first perimeter point
G1 Z22.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.882 Y76.143 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.16390 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X187.800 Y57.027 E1.06121 ; perimeter
G1 X188.099 Y56.808 E0.01527 ; perimeter
G1 X188.405 Y56.640 E0.01442 ; perimeter
G1 X188.732 Y56.513 E0.01443 ; perimeter
G1 X189.072 Y56.429 E0.01442 ; perimeter
G1 X189.420 Y56.391 E0.01443 ; perimeter
G1 X189.770 Y56.398 E0.01441 ; perimeter
G1 X190.116 Y56.451 E0.01443 ; perimeter
G1 X190.452 Y56.549 E0.01442 ; perimeter
G1 X190.775 Y56.691 E0.01453 ; perimeter
G1 X191.028 Y56.841 E0.01213 ; perimeter
G1 X191.331 Y57.084 E0.01599 ; perimeter
G1 X190.873 Y57.468 E0.02465 ; perimeter
G1 X190.668 Y57.323 E0.01035 ; perimeter
G1 X190.329 Y57.169 E0.01534 ; perimeter
G1 X189.834 Y57.047 E0.02098 ; perimeter
G1 X189.471 Y57.025 E0.01501 ; perimeter
G1 X189.110 Y57.057 E0.01490 ; perimeter
G1 X188.741 Y57.150 E0.01568 ; perimeter
G1 X188.275 Y57.364 E0.02112 ; perimeter
G1 X187.984 Y57.572 E0.01476 ; perimeter
G1 X168.261 Y74.121 E1.06062 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X160.272 Y76.514 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.177 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.323 Y76.094 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.18617 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X187.555 Y56.715 E1.05580 ; perimeter
G1 X187.885 Y56.473 E0.01687 ; perimeter
G1 X188.238 Y56.280 E0.01656 ; perimeter
G1 X188.612 Y56.134 E0.01656 ; perimeter
G1 X189.003 Y56.038 E0.01656 ; perimeter
G1 X189.402 Y55.994 E0.01656 ; perimeter
G1 X189.615 Y55.999 E0.00878 ; perimeter
G1 X189.804 Y56.003 E0.00778 ; perimeter
G1 X190.202 Y56.063 E0.01656 ; perimeter
G1 X190.588 Y56.176 E0.01656 ; perimeter
G1 X190.957 Y56.337 E0.01660 ; perimeter
G1 X191.250 Y56.511 E0.01404 ; perimeter
G1 X191.514 Y56.711 E0.01366 ; perimeter
G1 X191.748 Y56.931 E0.01320 ; perimeter
G1 X191.910 Y57.115 E0.01012 ; perimeter
G1 X190.885 Y57.976 E0.05512 ; perimeter
G1 X190.470 Y57.668 E0.02129 ; perimeter
G1 X190.199 Y57.545 E0.01227 ; perimeter
G1 X189.775 Y57.441 E0.01798 ; perimeter
G1 X189.476 Y57.422 E0.01231 ; perimeter
G1 X189.177 Y57.449 E0.01239 ; perimeter
G1 X188.873 Y57.525 E0.01289 ; perimeter
G1 X188.475 Y57.708 E0.01805 ; perimeter
G1 X188.226 Y57.885 E0.01257 ; perimeter
G1 X168.405 Y74.517 E1.06592 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X160.223 Y77.073 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.159 Y76.712 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.323 Y76.094 E-0.30695 ; wipe and retract
G1 X160.826 Y74.833 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.600 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z22.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y139.661 E0.02331 ; perimeter
G1 X83.970 Y139.661 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.02331 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.968 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y139.265 E0.04640 ; perimeter
G1 X84.366 Y139.265 E0.21040 ; perimeter
G1 X84.366 Y140.391 E0.04640 ; perimeter
G1 X84.010 Y140.747 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.132 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y138.868 E0.06949 ; perimeter
G1 X84.762 Y138.868 E0.24305 ; perimeter
G1 X84.762 Y140.555 E0.06949 ; perimeter
G1 X84.175 Y141.143 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.805 Y140.956 F10800.000 ; move inwards before travel
G1 F8640
G1 X80.883 Y141.173 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.600 F10800.000 ; lift Z
G1 X74.319 Y136.122 ; move to first perimeter point
G1 Z22.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X46.878 Y113.096 E1.47574 ; perimeter
G1 X46.599 Y112.828 E0.01592 ; perimeter
G1 X46.373 Y112.540 E0.01509 ; perimeter
G1 X46.187 Y112.223 E0.01513 ; perimeter
G1 X46.046 Y111.883 E0.01516 ; perimeter
G1 X45.929 Y111.377 E0.02141 ; perimeter
G1 X45.907 Y110.998 E0.01561 ; perimeter
G1 X45.936 Y110.633 E0.01510 ; perimeter
G1 X46.014 Y110.274 E0.01513 ; perimeter
G1 X46.142 Y109.929 E0.01515 ; perimeter
G1 X46.315 Y109.604 E0.01517 ; perimeter
G1 X46.545 Y109.289 E0.01606 ; perimeter
G1 X47.438 Y108.225 E0.05723 ; perimeter
G1 X47.848 Y108.569 E0.02205 ; perimeter
G1 X47.087 Y109.476 E0.04877 ; perimeter
G1 X46.862 Y109.796 E0.01612 ; perimeter
G1 X46.685 Y110.176 E0.01725 ; perimeter
G1 X46.577 Y110.580 E0.01725 ; perimeter
G1 X46.541 Y110.997 E0.01725 ; perimeter
G1 X46.577 Y111.414 E0.01725 ; perimeter
G1 X46.685 Y111.819 E0.01725 ; perimeter
G1 X46.862 Y112.198 E0.01725 ; perimeter
G1 X47.102 Y112.541 E0.01725 ; perimeter
G1 X47.379 Y112.818 E0.01612 ; perimeter
G1 X74.664 Y135.712 E1.46727 ; perimeter
G1 X74.358 Y136.076 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X74.368 Y136.681 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.612 Y113.391 E1.49263 ; perimeter
G1 X46.305 Y113.094 E0.01759 ; perimeter
G1 X46.044 Y112.764 E0.01733 ; perimeter
G1 X45.831 Y112.400 E0.01738 ; perimeter
G1 X45.670 Y112.010 E0.01741 ; perimeter
G1 X45.562 Y111.596 E0.01761 ; perimeter
G1 X45.535 Y111.419 E0.00738 ; perimeter
G1 X45.510 Y110.995 E0.01751 ; perimeter
G1 X45.543 Y110.575 E0.01735 ; perimeter
G1 X45.633 Y110.163 E0.01738 ; perimeter
G1 X45.779 Y109.766 E0.01741 ; perimeter
G1 X45.979 Y109.393 E0.01742 ; perimeter
G1 X46.232 Y109.045 E0.01775 ; perimeter
G1 X47.389 Y107.667 E0.07412 ; perimeter
G1 X48.406 Y108.520 E0.05471 ; perimeter
G1 X47.402 Y109.717 E0.06438 ; perimeter
G1 X47.207 Y109.995 E0.01398 ; perimeter
G1 X47.059 Y110.312 E0.01439 ; perimeter
G1 X46.969 Y110.649 E0.01439 ; perimeter
G1 X46.938 Y110.997 E0.01439 ; perimeter
G1 X46.969 Y111.345 E0.01439 ; perimeter
G1 X47.059 Y111.683 E0.01439 ; perimeter
G1 X47.207 Y111.999 E0.01439 ; perimeter
G1 X47.407 Y112.285 E0.01439 ; perimeter
G1 X47.647 Y112.525 E0.01398 ; perimeter
G1 X75.222 Y135.663 E1.48289 ; perimeter
G1 X74.407 Y136.635 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X74.065 Y136.420 F10800.000 ; move inwards before travel
G1 F8640
G1 X71.882 Y134.523 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.600 F10800.000 ; lift Z
G1 X89.489 Y114.699 ; move to first perimeter point
G1 Z22.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.15587 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X61.731 Y95.718 E1.06062 ; perimeter
G1 X61.440 Y95.510 E0.01476 ; perimeter
G1 X60.974 Y95.296 E0.02112 ; perimeter
G1 X60.604 Y95.203 E0.01568 ; perimeter
G1 X60.244 Y95.171 E0.01490 ; perimeter
G1 X59.880 Y95.194 E0.01501 ; perimeter
G1 X59.386 Y95.315 E0.02097 ; perimeter
G1 X59.047 Y95.469 E0.01534 ; perimeter
G1 X58.842 Y95.614 E0.01035 ; perimeter
G1 X58.383 Y95.230 E0.02465 ; perimeter
G1 X58.686 Y94.987 E0.01599 ; perimeter
G1 X58.940 Y94.837 E0.01213 ; perimeter
G1 X59.263 Y94.695 E0.01453 ; perimeter
G1 X59.599 Y94.597 E0.01442 ; perimeter
G1 X59.945 Y94.544 E0.01442 ; perimeter
G1 X60.295 Y94.537 E0.01443 ; perimeter
G1 X60.463 Y94.555 E0.00694 ; perimeter
G1 X60.643 Y94.575 E0.00747 ; perimeter
G1 X60.983 Y94.659 E0.01443 ; perimeter
G1 X61.309 Y94.786 E0.01442 ; perimeter
G1 X61.616 Y94.954 E0.01443 ; perimeter
G1 X61.915 Y95.173 E0.01527 ; perimeter
G1 X81.649 Y111.732 E1.06121 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X89.833 Y114.289 E0.16390 ; perimeter
G1 X89.528 Y114.653 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.538 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.16626 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X61.488 Y96.032 E1.06592 ; perimeter
G1 X61.240 Y95.854 E0.01257 ; perimeter
G1 X60.842 Y95.671 E0.01805 ; perimeter
G1 X60.538 Y95.595 E0.01289 ; perimeter
G1 X60.239 Y95.568 E0.01239 ; perimeter
G1 X59.940 Y95.587 E0.01231 ; perimeter
G1 X59.516 Y95.691 E0.01798 ; perimeter
G1 X59.245 Y95.814 E0.01227 ; perimeter
G1 X58.830 Y96.122 E0.02129 ; perimeter
G1 X57.805 Y95.262 E0.05512 ; perimeter
G1 X57.967 Y95.077 E0.01012 ; perimeter
G1 X58.201 Y94.858 E0.01320 ; perimeter
G1 X58.465 Y94.658 E0.01366 ; perimeter
G1 X58.758 Y94.484 E0.01404 ; perimeter
G1 X59.127 Y94.322 E0.01660 ; perimeter
G1 X59.513 Y94.210 E0.01656 ; perimeter
G1 X59.911 Y94.149 E0.01656 ; perimeter
G1 X60.313 Y94.140 E0.01656 ; perimeter
G1 X60.712 Y94.184 E0.01656 ; perimeter
G1 X61.103 Y94.280 E0.01656 ; perimeter
G1 X61.477 Y94.426 E0.01656 ; perimeter
G1 X61.830 Y94.619 E0.01656 ; perimeter
G1 X62.160 Y94.861 E0.01687 ; perimeter
G1 X81.793 Y111.335 E1.05580 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X90.392 Y114.240 E0.18617 ; perimeter
G1 X89.577 Y115.212 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.257 Y114.972 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.024 Y113.134 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.600 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z22.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y139.661 E0.02331 ; perimeter
G1 X169.775 Y139.661 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.02331 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.462 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y139.265 E0.04640 ; perimeter
G1 X170.171 Y139.265 E0.21040 ; perimeter
G1 X170.171 Y140.391 E0.04640 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.522 Y140.789 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.298 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y138.868 E0.06949 ; perimeter
G1 X170.567 Y138.868 E0.24306 ; perimeter
G1 X170.567 Y140.555 E0.06949 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.358 Y141.185 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.282 Y140.786 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.667 Y140.555 E-0.21581 ; wipe and retract
G1 X164.667 Y138.868 E-0.38948 ; wipe and retract
G1 X165.337 Y138.868 E-0.15471 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.600 F10800.000 ; lift Z
G1 X175.110 Y136.122 ; move to first perimeter point
G1 Z22.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X174.766 Y135.712 E0.02205 ; perimeter
G1 X202.050 Y112.818 E1.46727 ; perimeter
G1 X202.327 Y112.541 E0.01613 ; perimeter
G1 X202.567 Y112.198 E0.01725 ; perimeter
G1 X202.744 Y111.819 E0.01725 ; perimeter
G1 X202.853 Y111.414 E0.01725 ; perimeter
G1 X202.889 Y110.997 E0.01725 ; perimeter
G1 X202.853 Y110.580 E0.01725 ; perimeter
G1 X202.744 Y110.176 E0.01725 ; perimeter
G1 X202.567 Y109.796 E0.01725 ; perimeter
G1 X202.343 Y109.476 E0.01612 ; perimeter
G1 X201.582 Y108.569 E0.04877 ; perimeter
G1 X201.992 Y108.225 E0.02205 ; perimeter
G1 X202.885 Y109.289 E0.05723 ; perimeter
G1 X203.114 Y109.604 E0.01606 ; perimeter
G1 X203.342 Y110.066 E0.02121 ; perimeter
G1 X203.415 Y110.270 E0.00893 ; perimeter
G1 X203.494 Y110.633 E0.01529 ; perimeter
G1 X203.523 Y110.998 E0.01510 ; perimeter
G1 X203.501 Y111.377 E0.01561 ; perimeter
G1 X203.383 Y111.883 E0.02141 ; perimeter
G1 X203.241 Y112.227 E0.01535 ; perimeter
G1 X203.148 Y112.391 E0.00775 ; perimeter
G1 X203.060 Y112.536 E0.00699 ; perimeter
G1 X202.830 Y112.828 E0.01529 ; perimeter
G1 X202.552 Y113.096 E0.01592 ; perimeter
G1 X175.156 Y136.084 E1.47327 ; perimeter
M204 S1000 ; adjust acceleration
G1 X175.061 Y136.681 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X174.208 Y135.663 E0.05471 ; perimeter
G1 X201.782 Y112.525 E1.48289 ; perimeter
G1 X202.022 Y112.285 E0.01398 ; perimeter
G1 X202.223 Y111.999 E0.01439 ; perimeter
G1 X202.370 Y111.683 E0.01439 ; perimeter
G1 X202.461 Y111.345 E0.01439 ; perimeter
G1 X202.491 Y110.997 E0.01439 ; perimeter
G1 X202.461 Y110.649 E0.01439 ; perimeter
G1 X202.370 Y110.312 E0.01439 ; perimeter
G1 X202.223 Y109.995 E0.01439 ; perimeter
G1 X202.028 Y109.717 E0.01398 ; perimeter
G1 X201.024 Y108.520 E0.06438 ; perimeter
G1 X202.041 Y107.667 E0.05471 ; perimeter
G1 X203.197 Y109.045 E0.07412 ; perimeter
G1 X203.451 Y109.393 E0.01775 ; perimeter
G1 X203.651 Y109.768 E0.01750 ; perimeter
G1 X203.714 Y109.928 E0.00708 ; perimeter
G1 X203.796 Y110.161 E0.01019 ; perimeter
G1 X203.887 Y110.575 E0.01744 ; perimeter
G1 X203.920 Y110.995 E0.01735 ; perimeter
G1 X203.895 Y111.419 E0.01751 ; perimeter
G1 X203.868 Y111.596 E0.00738 ; perimeter
G1 X203.760 Y112.010 E0.01761 ; perimeter
G1 X203.598 Y112.402 E0.01748 ; perimeter
G1 X203.490 Y112.592 E0.00901 ; perimeter
G1 X203.386 Y112.763 E0.00823 ; perimeter
G1 X203.125 Y113.094 E0.01740 ; perimeter
G1 X202.817 Y113.391 E0.01759 ; perimeter
G1 X175.107 Y136.642 E1.49016 ; perimeter
M204 S1000 ; adjust acceleration
G1 X174.992 Y136.287 F10800.000 ; move inwards before travel
G1 F8640
G1 X174.208 Y135.663 E-0.30695 ; wipe and retract
G1 X175.711 Y134.402 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.600 F10800.000 ; lift Z
G1 X159.940 Y114.699 ; move to first perimeter point
G1 Z22.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.596 Y114.289 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.16390 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X187.515 Y95.173 E1.06121 ; perimeter
G1 X187.813 Y94.954 E0.01527 ; perimeter
G1 X188.120 Y94.786 E0.01442 ; perimeter
G1 X188.447 Y94.659 E0.01443 ; perimeter
G1 X188.787 Y94.575 E0.01442 ; perimeter
G1 X189.135 Y94.537 E0.01443 ; perimeter
G1 X189.484 Y94.544 E0.01441 ; perimeter
G1 X189.831 Y94.597 E0.01443 ; perimeter
G1 X190.167 Y94.695 E0.01442 ; perimeter
G1 X190.490 Y94.837 E0.01453 ; perimeter
G1 X190.743 Y94.987 E0.01213 ; perimeter
G1 X191.046 Y95.230 E0.01599 ; perimeter
G1 X190.588 Y95.614 E0.02465 ; perimeter
G1 X190.383 Y95.469 E0.01035 ; perimeter
G1 X190.044 Y95.315 E0.01534 ; perimeter
G1 X189.549 Y95.194 E0.02098 ; perimeter
G1 X189.186 Y95.171 E0.01501 ; perimeter
G1 X188.825 Y95.203 E0.01490 ; perimeter
G1 X188.456 Y95.296 E0.01568 ; perimeter
G1 X187.990 Y95.510 E0.02112 ; perimeter
G1 X187.698 Y95.718 E0.01476 ; perimeter
G1 X167.976 Y112.267 E1.06062 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.986 Y114.661 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.892 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.038 Y114.240 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.18617 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X187.270 Y94.861 E1.05580 ; perimeter
G1 X187.600 Y94.619 E0.01687 ; perimeter
G1 X187.952 Y94.426 E0.01656 ; perimeter
G1 X188.327 Y94.280 E0.01656 ; perimeter
G1 X188.717 Y94.184 E0.01656 ; perimeter
G1 X189.117 Y94.140 E0.01656 ; perimeter
G1 X189.330 Y94.145 E0.00878 ; perimeter
G1 X189.519 Y94.149 E0.00778 ; perimeter
G1 X189.916 Y94.210 E0.01656 ; perimeter
G1 X190.302 Y94.322 E0.01656 ; perimeter
G1 X190.671 Y94.484 E0.01660 ; perimeter
G1 X190.965 Y94.658 E0.01404 ; perimeter
G1 X191.229 Y94.858 E0.01366 ; perimeter
G1 X191.462 Y95.077 E0.01320 ; perimeter
G1 X191.625 Y95.262 E0.01012 ; perimeter
G1 X190.600 Y96.122 E0.05512 ; perimeter
G1 X190.184 Y95.814 E0.02129 ; perimeter
G1 X189.913 Y95.691 E0.01227 ; perimeter
G1 X189.489 Y95.587 E0.01798 ; perimeter
G1 X189.191 Y95.568 E0.01231 ; perimeter
G1 X188.892 Y95.595 E0.01239 ; perimeter
G1 X188.588 Y95.671 E0.01289 ; perimeter
G1 X188.190 Y95.854 E0.01805 ; perimeter
G1 X187.941 Y96.032 E0.01257 ; perimeter
G1 X168.120 Y112.663 E1.06592 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X159.938 Y115.219 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.874 Y114.858 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;22.25


G1 F8640
G1 X159.038 Y114.240 E-0.30695 ; wipe and retract
G1 X160.541 Y112.979 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;22.25
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z22.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y101.659 E0.01736 ; perimeter
G1 X84.255 Y101.659 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.01736 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.253 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y101.263 E0.04045 ; perimeter
G1 X84.651 Y101.263 E0.21040 ; perimeter
G1 X84.651 Y102.245 E0.04045 ; perimeter
G1 X84.296 Y102.600 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.417 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y100.867 E0.06354 ; perimeter
G1 X85.047 Y100.867 E0.24305 ; perimeter
G1 X85.047 Y102.409 E0.06354 ; perimeter
G1 X84.460 Y102.997 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.091 Y102.808 F10800.000 ; move inwards before travel
G1 F8640
G1 X81.168 Y103.027 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.850 F10800.000 ; lift Z
G1 X74.413 Y97.815 ; move to first perimeter point
G1 Z22.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.163 Y74.950 E1.46544 ; perimeter
G1 X46.883 Y74.680 E0.01601 ; perimeter
G1 X46.655 Y74.391 E0.01517 ; perimeter
G1 X46.469 Y74.072 E0.01521 ; perimeter
G1 X46.325 Y73.720 E0.01565 ; perimeter
G1 X46.215 Y73.228 E0.02077 ; perimeter
G1 X46.192 Y72.861 E0.01515 ; perimeter
G1 X46.220 Y72.489 E0.01538 ; perimeter
G1 X46.295 Y72.141 E0.01468 ; perimeter
G1 X46.425 Y71.786 E0.01557 ; perimeter
G1 X46.600 Y71.460 E0.01524 ; perimeter
G1 X46.830 Y71.143 E0.01614 ; perimeter
G1 X47.723 Y70.079 E0.05723 ; perimeter
G1 X48.133 Y70.423 E0.02205 ; perimeter
G1 X47.372 Y71.330 E0.04877 ; perimeter
G1 X47.148 Y71.650 E0.01612 ; perimeter
G1 X46.971 Y72.030 E0.01725 ; perimeter
G1 X46.862 Y72.434 E0.01725 ; perimeter
G1 X46.826 Y72.851 E0.01725 ; perimeter
G1 X46.862 Y73.268 E0.01725 ; perimeter
G1 X46.971 Y73.673 E0.01725 ; perimeter
G1 X47.148 Y74.052 E0.01725 ; perimeter
G1 X47.388 Y74.395 E0.01725 ; perimeter
G1 X47.664 Y74.672 E0.01612 ; perimeter
G1 X74.757 Y97.405 E1.45697 ; perimeter
G1 X74.452 Y97.769 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X74.462 Y98.374 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.898 Y75.245 E1.48233 ; perimeter
G1 X46.588 Y74.947 E0.01770 ; perimeter
G1 X46.327 Y74.614 E0.01742 ; perimeter
G1 X46.113 Y74.248 E0.01746 ; perimeter
G1 X45.950 Y73.852 E0.01765 ; perimeter
G1 X45.821 Y73.280 E0.02413 ; perimeter
G1 X45.795 Y72.859 E0.01740 ; perimeter
G1 X45.827 Y72.435 E0.01751 ; perimeter
G1 X45.915 Y72.025 E0.01728 ; perimeter
G1 X46.063 Y71.624 E0.01761 ; perimeter
G1 X46.263 Y71.249 E0.01751 ; perimeter
G1 X46.518 Y70.899 E0.01783 ; perimeter
G1 X47.674 Y69.520 E0.07412 ; perimeter
G1 X48.691 Y70.374 E0.05471 ; perimeter
G1 X47.687 Y71.571 E0.06438 ; perimeter
G1 X47.492 Y71.849 E0.01398 ; perimeter
G1 X47.344 Y72.166 E0.01439 ; perimeter
G1 X47.254 Y72.503 E0.01439 ; perimeter
G1 X47.224 Y72.851 E0.01439 ; perimeter
G1 X47.254 Y73.199 E0.01439 ; perimeter
G1 X47.344 Y73.537 E0.01439 ; perimeter
G1 X47.492 Y73.853 E0.01439 ; perimeter
G1 X47.692 Y74.139 E0.01439 ; perimeter
G1 X47.932 Y74.379 E0.01398 ; perimeter
G1 X75.316 Y97.356 E1.47259 ; perimeter
G1 X74.501 Y98.328 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X74.159 Y98.113 F10800.000 ; move inwards before travel
G1 F8640
G1 X71.976 Y96.216 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.850 F10800.000 ; lift Z
G1 X89.774 Y76.553 ; move to first perimeter point
G1 Z22.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.15587 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X62.017 Y57.572 E1.06060 ; perimeter
G1 X61.729 Y57.366 E0.01459 ; perimeter
G1 X61.252 Y57.147 E0.02159 ; perimeter
G1 X60.887 Y57.057 E0.01550 ; perimeter
G1 X60.533 Y57.025 E0.01463 ; perimeter
G1 X60.175 Y57.046 E0.01479 ; perimeter
G1 X59.671 Y57.169 E0.02138 ; perimeter
G1 X59.336 Y57.321 E0.01514 ; perimeter
G1 X59.127 Y57.469 E0.01054 ; perimeter
G1 X58.668 Y57.083 E0.02469 ; perimeter
G1 X58.976 Y56.838 E0.01621 ; perimeter
G1 X59.225 Y56.691 E0.01192 ; perimeter
G1 X59.548 Y56.549 E0.01454 ; perimeter
G1 X59.884 Y56.451 E0.01442 ; perimeter
G1 X60.230 Y56.398 E0.01442 ; perimeter
G1 X60.581 Y56.391 E0.01443 ; perimeter
G1 X60.722 Y56.406 E0.00586 ; perimeter
G1 X60.928 Y56.429 E0.00855 ; perimeter
G1 X61.268 Y56.513 E0.01443 ; perimeter
G1 X61.595 Y56.640 E0.01442 ; perimeter
G1 X61.902 Y56.808 E0.01442 ; perimeter
G1 X62.200 Y57.027 E0.01526 ; perimeter
G1 X81.934 Y73.586 E1.06121 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.118 Y76.143 E0.16390 ; perimeter
G1 X89.813 Y76.507 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.823 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.16626 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X61.774 Y57.885 E1.06591 ; perimeter
G1 X61.529 Y57.710 E0.01240 ; perimeter
G1 X61.121 Y57.523 E0.01850 ; perimeter
G1 X60.821 Y57.449 E0.01271 ; perimeter
G1 X60.527 Y57.422 E0.01217 ; perimeter
G1 X60.234 Y57.440 E0.01210 ; perimeter
G1 X59.801 Y57.545 E0.01837 ; perimeter
G1 X59.535 Y57.666 E0.01204 ; perimeter
G1 X59.115 Y57.975 E0.02149 ; perimeter
G1 X58.090 Y57.116 E0.05509 ; perimeter
G1 X58.267 Y56.915 E0.01099 ; perimeter
G1 X58.495 Y56.703 E0.01284 ; perimeter
G1 X58.755 Y56.508 E0.01340 ; perimeter
G1 X59.044 Y56.337 E0.01380 ; perimeter
G1 X59.413 Y56.175 E0.01660 ; perimeter
G1 X59.799 Y56.063 E0.01656 ; perimeter
G1 X60.196 Y56.003 E0.01656 ; perimeter
G1 X60.598 Y55.994 E0.01656 ; perimeter
G1 X60.997 Y56.038 E0.01656 ; perimeter
G1 X61.388 Y56.134 E0.01656 ; perimeter
G1 X61.763 Y56.280 E0.01656 ; perimeter
G1 X62.115 Y56.473 E0.01656 ; perimeter
G1 X62.445 Y56.715 E0.01687 ; perimeter
G1 X82.078 Y73.189 E1.05580 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X90.677 Y76.094 E0.18617 ; perimeter
G1 X89.862 Y77.065 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.543 Y76.826 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.309 Y74.987 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.850 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z22.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y101.659 E0.01736 ; perimeter
G1 X170.060 Y101.659 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.01736 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.747 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y101.263 E0.04045 ; perimeter
G1 X170.456 Y101.263 E0.21040 ; perimeter
G1 X170.456 Y102.245 E0.04045 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.807 Y102.643 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.583 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y100.867 E0.06354 ; perimeter
G1 X170.853 Y100.867 E0.24306 ; perimeter
G1 X170.853 Y102.409 E0.06354 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.643 Y103.039 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.567 Y102.640 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.953 Y102.409 E-0.21581 ; wipe and retract
G1 X164.953 Y100.867 E-0.35616 ; wipe and retract
G1 X165.767 Y100.867 E-0.18803 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.850 F10800.000 ; lift Z
G1 X175.587 Y97.815 ; move to first perimeter point
G1 Z22.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X175.243 Y97.405 E0.02205 ; perimeter
G1 X202.336 Y74.672 E1.45697 ; perimeter
G1 X202.612 Y74.395 E0.01613 ; perimeter
G1 X202.852 Y74.052 E0.01725 ; perimeter
G1 X203.029 Y73.673 E0.01725 ; perimeter
G1 X203.138 Y73.268 E0.01725 ; perimeter
G1 X203.174 Y72.851 E0.01725 ; perimeter
G1 X203.138 Y72.434 E0.01725 ; perimeter
G1 X203.029 Y72.030 E0.01725 ; perimeter
G1 X202.852 Y71.650 E0.01725 ; perimeter
G1 X202.628 Y71.330 E0.01612 ; perimeter
G1 X201.867 Y70.423 E0.04877 ; perimeter
G1 X202.277 Y70.079 E0.02205 ; perimeter
G1 X203.170 Y71.143 E0.05723 ; perimeter
G1 X203.400 Y71.460 E0.01614 ; perimeter
G1 X203.620 Y71.902 E0.02035 ; perimeter
G1 X203.701 Y72.130 E0.00996 ; perimeter
G1 X203.780 Y72.494 E0.01535 ; perimeter
G1 X203.808 Y72.861 E0.01518 ; perimeter
G1 X203.786 Y73.221 E0.01484 ; perimeter
G1 X203.668 Y73.738 E0.02183 ; perimeter
G1 X203.529 Y74.075 E0.01504 ; perimeter
G1 X203.422 Y74.264 E0.00893 ; perimeter
G1 X203.117 Y74.680 E0.02126 ; perimeter
G1 X202.837 Y74.950 E0.01601 ; perimeter
G1 X175.633 Y97.777 E1.46297 ; perimeter
M204 S1000 ; adjust acceleration
G1 X175.538 Y98.374 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X174.684 Y97.356 E0.05471 ; perimeter
G1 X202.068 Y74.379 E1.47259 ; perimeter
G1 X202.308 Y74.139 E0.01398 ; perimeter
G1 X202.508 Y73.853 E0.01439 ; perimeter
G1 X202.656 Y73.537 E0.01439 ; perimeter
G1 X202.746 Y73.199 E0.01439 ; perimeter
G1 X202.776 Y72.851 E0.01439 ; perimeter
G1 X202.746 Y72.503 E0.01439 ; perimeter
G1 X202.656 Y72.166 E0.01439 ; perimeter
G1 X202.508 Y71.849 E0.01439 ; perimeter
G1 X202.313 Y71.571 E0.01398 ; perimeter
G1 X201.309 Y70.374 E0.06438 ; perimeter
G1 X202.326 Y69.520 E0.05471 ; perimeter
G1 X203.482 Y70.899 E0.07412 ; perimeter
G1 X203.737 Y71.249 E0.01783 ; perimeter
G1 X203.938 Y71.626 E0.01759 ; perimeter
G1 X203.992 Y71.764 E0.00611 ; perimeter
G1 X204.083 Y72.021 E0.01124 ; perimeter
G1 X204.173 Y72.437 E0.01752 ; perimeter
G1 X204.205 Y72.859 E0.01744 ; perimeter
G1 X204.179 Y73.278 E0.01729 ; perimeter
G1 X204.047 Y73.858 E0.02451 ; perimeter
G1 X203.886 Y74.249 E0.01743 ; perimeter
G1 X203.764 Y74.465 E0.01021 ; perimeter
G1 X203.674 Y74.612 E0.00712 ; perimeter
G1 X203.412 Y74.947 E0.01751 ; perimeter
G1 X203.102 Y75.245 E0.01770 ; perimeter
G1 X175.584 Y98.335 E1.47986 ; perimeter
M204 S1000 ; adjust acceleration
G1 X175.468 Y97.980 F10800.000 ; move inwards before travel
G1 F8640
G1 X174.684 Y97.356 E-0.30695 ; wipe and retract
G1 X176.187 Y96.095 E-0.45305 ; wipe and retract
M73 Q96 S5
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.850 F10800.000 ; lift Z
G1 X160.226 Y76.553 ; move to first perimeter point
G1 Z22.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.882 Y76.143 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.16390 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X187.800 Y57.027 E1.06121 ; perimeter
G1 X188.099 Y56.808 E0.01526 ; perimeter
G1 X188.405 Y56.640 E0.01442 ; perimeter
G1 X188.732 Y56.513 E0.01443 ; perimeter
G1 X189.072 Y56.429 E0.01442 ; perimeter
G1 X189.420 Y56.391 E0.01443 ; perimeter
G1 X189.769 Y56.398 E0.01441 ; perimeter
G1 X190.116 Y56.451 E0.01443 ; perimeter
G1 X190.452 Y56.549 E0.01442 ; perimeter
G1 X190.775 Y56.691 E0.01454 ; perimeter
G1 X191.024 Y56.838 E0.01192 ; perimeter
G1 X191.332 Y57.083 E0.01621 ; perimeter
G1 X190.873 Y57.469 E0.02469 ; perimeter
G1 X190.664 Y57.321 E0.01054 ; perimeter
G1 X190.329 Y57.169 E0.01514 ; perimeter
G1 X189.825 Y57.046 E0.02138 ; perimeter
G1 X189.467 Y57.025 E0.01479 ; perimeter
G1 X189.113 Y57.057 E0.01463 ; perimeter
G1 X188.748 Y57.147 E0.01550 ; perimeter
G1 X188.271 Y57.366 E0.02159 ; perimeter
G1 X187.983 Y57.572 E0.01459 ; perimeter
G1 X168.261 Y74.121 E1.06060 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X160.272 Y76.514 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.177 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.323 Y76.094 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.18617 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X187.555 Y56.715 E1.05580 ; perimeter
G1 X187.885 Y56.473 E0.01687 ; perimeter
G1 X188.237 Y56.280 E0.01656 ; perimeter
G1 X188.612 Y56.134 E0.01656 ; perimeter
G1 X189.002 Y56.038 E0.01656 ; perimeter
G1 X189.402 Y55.994 E0.01656 ; perimeter
G1 X189.640 Y55.999 E0.00982 ; perimeter
G1 X189.804 Y56.003 E0.00673 ; perimeter
G1 X190.201 Y56.063 E0.01656 ; perimeter
G1 X190.587 Y56.175 E0.01656 ; perimeter
G1 X190.956 Y56.337 E0.01660 ; perimeter
G1 X191.245 Y56.508 E0.01380 ; perimeter
G1 X191.505 Y56.703 E0.01340 ; perimeter
G1 X191.733 Y56.915 E0.01285 ; perimeter
G1 X191.910 Y57.116 E0.01099 ; perimeter
G1 X190.885 Y57.975 E0.05509 ; perimeter
G1 X190.465 Y57.666 E0.02149 ; perimeter
G1 X190.199 Y57.545 E0.01204 ; perimeter
G1 X189.766 Y57.440 E0.01837 ; perimeter
G1 X189.473 Y57.422 E0.01210 ; perimeter
G1 X189.179 Y57.449 E0.01217 ; perimeter
G1 X188.879 Y57.523 E0.01271 ; perimeter
G1 X188.471 Y57.710 E0.01850 ; perimeter
G1 X188.226 Y57.885 E0.01240 ; perimeter
G1 X168.405 Y74.517 E1.06591 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X160.223 Y77.073 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.159 Y76.712 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.323 Y76.094 E-0.30695 ; wipe and retract
G1 X160.826 Y74.833 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.850 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z22.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y139.805 E0.01736 ; perimeter
G1 X83.970 Y139.805 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.01736 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.968 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y139.409 E0.04045 ; perimeter
G1 X84.366 Y139.409 E0.21040 ; perimeter
G1 X84.366 Y140.391 E0.04045 ; perimeter
G1 X84.010 Y140.747 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.132 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.013 E0.06354 ; perimeter
G1 X84.762 Y139.013 E0.24305 ; perimeter
G1 X84.762 Y140.555 E0.06354 ; perimeter
G1 X84.175 Y141.143 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.806 Y140.954 F10800.000 ; move inwards before travel
G1 F8640
G1 X80.883 Y141.173 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.850 F10800.000 ; lift Z
G1 X74.128 Y135.962 ; move to first perimeter point
G1 Z22.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X46.878 Y113.096 E1.46544 ; perimeter
G1 X46.598 Y112.826 E0.01601 ; perimeter
G1 X46.370 Y112.537 E0.01517 ; perimeter
G1 X46.184 Y112.218 E0.01521 ; perimeter
G1 X46.040 Y111.866 E0.01565 ; perimeter
G1 X45.930 Y111.375 E0.02077 ; perimeter
G1 X45.907 Y111.007 E0.01515 ; perimeter
G1 X45.935 Y110.635 E0.01538 ; perimeter
G1 X46.010 Y110.287 E0.01468 ; perimeter
G1 X46.140 Y109.932 E0.01557 ; perimeter
G1 X46.314 Y109.606 E0.01524 ; perimeter
G1 X46.545 Y109.289 E0.01614 ; perimeter
G1 X47.438 Y108.225 E0.05723 ; perimeter
G1 X47.848 Y108.569 E0.02205 ; perimeter
G1 X47.087 Y109.476 E0.04877 ; perimeter
G1 X46.862 Y109.796 E0.01612 ; perimeter
G1 X46.685 Y110.176 E0.01725 ; perimeter
G1 X46.577 Y110.580 E0.01725 ; perimeter
G1 X46.541 Y110.997 E0.01725 ; perimeter
G1 X46.577 Y111.414 E0.01725 ; perimeter
G1 X46.685 Y111.819 E0.01725 ; perimeter
G1 X46.862 Y112.198 E0.01725 ; perimeter
G1 X47.102 Y112.541 E0.01725 ; perimeter
G1 X47.379 Y112.818 E0.01612 ; perimeter
G1 X74.472 Y135.551 E1.45697 ; perimeter
G1 X74.166 Y135.916 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X74.177 Y136.520 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.612 Y113.391 E1.48233 ; perimeter
M73 P96 R4
G1 X46.303 Y113.093 E0.01770 ; perimeter
G1 X46.042 Y112.760 E0.01742 ; perimeter
G1 X45.828 Y112.394 E0.01746 ; perimeter
G1 X45.665 Y111.998 E0.01765 ; perimeter
G1 X45.536 Y111.427 E0.02413 ; perimeter
G1 X45.509 Y111.005 E0.01740 ; perimeter
G1 X45.541 Y110.581 E0.01751 ; perimeter
G1 X45.630 Y110.171 E0.01728 ; perimeter
G1 X45.778 Y109.770 E0.01761 ; perimeter
G1 X45.978 Y109.395 E0.01751 ; perimeter
G1 X46.232 Y109.045 E0.01783 ; perimeter
G1 X47.389 Y107.667 E0.07412 ; perimeter
G1 X48.406 Y108.520 E0.05471 ; perimeter
G1 X47.402 Y109.717 E0.06438 ; perimeter
G1 X47.207 Y109.995 E0.01398 ; perimeter
G1 X47.059 Y110.312 E0.01439 ; perimeter
G1 X46.969 Y110.649 E0.01439 ; perimeter
G1 X46.938 Y110.997 E0.01439 ; perimeter
G1 X46.969 Y111.345 E0.01439 ; perimeter
G1 X47.059 Y111.683 E0.01439 ; perimeter
G1 X47.207 Y111.999 E0.01439 ; perimeter
G1 X47.407 Y112.285 E0.01439 ; perimeter
G1 X47.647 Y112.525 E0.01398 ; perimeter
G1 X75.030 Y135.503 E1.47259 ; perimeter
G1 X74.215 Y136.474 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X73.874 Y136.259 F10800.000 ; move inwards before travel
G1 F8640
G1 X71.690 Y134.362 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.850 F10800.000 ; lift Z
G1 X89.489 Y114.699 ; move to first perimeter point
G1 Z22.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.15587 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X61.732 Y95.718 E1.06060 ; perimeter
G1 X61.443 Y95.512 E0.01459 ; perimeter
G1 X60.967 Y95.294 E0.02159 ; perimeter
G1 X60.602 Y95.203 E0.01550 ; perimeter
G1 X60.248 Y95.171 E0.01463 ; perimeter
G1 X59.890 Y95.192 E0.01479 ; perimeter
G1 X59.386 Y95.315 E0.02138 ; perimeter
G1 X59.051 Y95.467 E0.01514 ; perimeter
G1 X58.842 Y95.615 E0.01054 ; perimeter
G1 X58.383 Y95.230 E0.02469 ; perimeter
G1 X58.691 Y94.984 E0.01621 ; perimeter
G1 X58.940 Y94.837 E0.01192 ; perimeter
G1 X59.263 Y94.695 E0.01454 ; perimeter
G1 X59.599 Y94.597 E0.01442 ; perimeter
G1 X59.945 Y94.544 E0.01442 ; perimeter
G1 X60.295 Y94.537 E0.01443 ; perimeter
G1 X60.437 Y94.553 E0.00586 ; perimeter
G1 X60.643 Y94.575 E0.00855 ; perimeter
G1 X60.983 Y94.659 E0.01443 ; perimeter
G1 X61.309 Y94.786 E0.01442 ; perimeter
G1 X61.616 Y94.954 E0.01442 ; perimeter
G1 X61.915 Y95.173 E0.01526 ; perimeter
G1 X81.649 Y111.732 E1.06121 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X89.833 Y114.289 E0.16390 ; perimeter
G1 X89.528 Y114.653 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.538 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.16626 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X61.489 Y96.032 E1.06591 ; perimeter
G1 X61.244 Y95.857 E0.01240 ; perimeter
G1 X60.836 Y95.669 E0.01850 ; perimeter
G1 X60.536 Y95.595 E0.01271 ; perimeter
G1 X60.242 Y95.568 E0.01217 ; perimeter
G1 X59.949 Y95.586 E0.01210 ; perimeter
G1 X59.516 Y95.691 E0.01837 ; perimeter
G1 X59.249 Y95.812 E0.01204 ; perimeter
G1 X58.829 Y96.121 E0.02149 ; perimeter
G1 X57.805 Y95.262 E0.05509 ; perimeter
G1 X57.982 Y95.062 E0.01099 ; perimeter
G1 X58.210 Y94.849 E0.01284 ; perimeter
G1 X58.470 Y94.654 E0.01340 ; perimeter
G1 X58.758 Y94.483 E0.01380 ; perimeter
G1 X59.128 Y94.322 E0.01660 ; perimeter
G1 X59.514 Y94.210 E0.01656 ; perimeter
G1 X59.911 Y94.149 E0.01656 ; perimeter
G1 X60.313 Y94.140 E0.01656 ; perimeter
G1 X60.712 Y94.184 E0.01656 ; perimeter
G1 X61.103 Y94.280 E0.01656 ; perimeter
G1 X61.477 Y94.426 E0.01656 ; perimeter
G1 X61.830 Y94.619 E0.01656 ; perimeter
G1 X62.160 Y94.861 E0.01687 ; perimeter
G1 X81.793 Y111.335 E1.05580 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X90.392 Y114.240 E0.18617 ; perimeter
G1 X89.577 Y115.212 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.257 Y114.972 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.024 Y113.134 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.850 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z22.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y139.805 E0.01736 ; perimeter
G1 X169.775 Y139.805 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.01736 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.462 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y139.409 E0.04045 ; perimeter
G1 X170.171 Y139.409 E0.21040 ; perimeter
G1 X170.171 Y140.391 E0.04045 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.522 Y140.789 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.298 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.013 E0.06354 ; perimeter
G1 X170.567 Y139.013 E0.24306 ; perimeter
G1 X170.567 Y140.555 E0.06354 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.358 Y141.185 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.282 Y140.786 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.667 Y140.555 E-0.21581 ; wipe and retract
G1 X164.667 Y139.013 E-0.35616 ; wipe and retract
G1 X165.482 Y139.013 E-0.18803 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.850 F10800.000 ; lift Z
G1 X175.302 Y135.962 ; move to first perimeter point
G1 Z22.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X174.958 Y135.551 E0.02205 ; perimeter
G1 X202.050 Y112.818 E1.45697 ; perimeter
G1 X202.327 Y112.541 E0.01613 ; perimeter
G1 X202.567 Y112.198 E0.01725 ; perimeter
G1 X202.744 Y111.819 E0.01725 ; perimeter
G1 X202.853 Y111.414 E0.01725 ; perimeter
G1 X202.889 Y110.997 E0.01725 ; perimeter
G1 X202.853 Y110.580 E0.01725 ; perimeter
G1 X202.744 Y110.176 E0.01725 ; perimeter
G1 X202.567 Y109.796 E0.01725 ; perimeter
G1 X202.343 Y109.476 E0.01612 ; perimeter
G1 X201.582 Y108.569 E0.04877 ; perimeter
G1 X201.992 Y108.225 E0.02205 ; perimeter
G1 X202.885 Y109.289 E0.05723 ; perimeter
G1 X203.115 Y109.606 E0.01614 ; perimeter
G1 X203.335 Y110.048 E0.02035 ; perimeter
G1 X203.416 Y110.276 E0.00996 ; perimeter
G1 X203.495 Y110.640 E0.01535 ; perimeter
G1 X203.523 Y111.007 E0.01518 ; perimeter
G1 X203.500 Y111.367 E0.01484 ; perimeter
G1 X203.383 Y111.884 E0.02183 ; perimeter
G1 X203.244 Y112.222 E0.01504 ; perimeter
G1 X203.137 Y112.410 E0.00893 ; perimeter
G1 X202.832 Y112.826 E0.02126 ; perimeter
G1 X202.552 Y113.096 E0.01601 ; perimeter
G1 X175.348 Y135.923 E1.46297 ; perimeter
M204 S1000 ; adjust acceleration
G1 X175.253 Y136.520 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X174.399 Y135.503 E0.05471 ; perimeter
G1 X201.782 Y112.525 E1.47259 ; perimeter
G1 X202.022 Y112.285 E0.01398 ; perimeter
G1 X202.223 Y111.999 E0.01439 ; perimeter
G1 X202.370 Y111.683 E0.01439 ; perimeter
G1 X202.461 Y111.345 E0.01439 ; perimeter
G1 X202.491 Y110.997 E0.01439 ; perimeter
G1 X202.461 Y110.649 E0.01439 ; perimeter
G1 X202.370 Y110.312 E0.01439 ; perimeter
G1 X202.223 Y109.995 E0.01439 ; perimeter
G1 X202.028 Y109.717 E0.01398 ; perimeter
G1 X201.024 Y108.520 E0.06438 ; perimeter
G1 X202.041 Y107.667 E0.05471 ; perimeter
G1 X203.197 Y109.045 E0.07412 ; perimeter
G1 X203.452 Y109.395 E0.01783 ; perimeter
G1 X203.653 Y109.772 E0.01759 ; perimeter
G1 X203.707 Y109.910 E0.00611 ; perimeter
G1 X203.798 Y110.167 E0.01124 ; perimeter
G1 X203.888 Y110.583 E0.01752 ; perimeter
G1 X203.920 Y111.005 E0.01744 ; perimeter
G1 X203.894 Y111.424 E0.01729 ; perimeter
G1 X203.762 Y112.004 E0.02451 ; perimeter
G1 X203.601 Y112.395 E0.01743 ; perimeter
G1 X203.479 Y112.611 E0.01021 ; perimeter
G1 X203.389 Y112.759 E0.00712 ; perimeter
G1 X203.126 Y113.093 E0.01751 ; perimeter
G1 X202.817 Y113.391 E0.01770 ; perimeter
G1 X175.299 Y136.481 E1.47986 ; perimeter
M204 S1000 ; adjust acceleration
G1 X175.183 Y136.126 F10800.000 ; move inwards before travel
G1 F8640
G1 X174.399 Y135.503 E-0.30695 ; wipe and retract
G1 X175.902 Y134.241 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.850 F10800.000 ; lift Z
G1 X159.940 Y114.699 ; move to first perimeter point
G1 Z22.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.596 Y114.289 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.16390 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X187.515 Y95.173 E1.06121 ; perimeter
G1 X187.813 Y94.954 E0.01526 ; perimeter
G1 X188.120 Y94.786 E0.01442 ; perimeter
G1 X188.446 Y94.659 E0.01443 ; perimeter
G1 X188.786 Y94.575 E0.01442 ; perimeter
G1 X189.135 Y94.537 E0.01443 ; perimeter
G1 X189.484 Y94.544 E0.01441 ; perimeter
G1 X189.831 Y94.597 E0.01443 ; perimeter
G1 X190.167 Y94.695 E0.01442 ; perimeter
G1 X190.490 Y94.837 E0.01454 ; perimeter
G1 X190.739 Y94.984 E0.01192 ; perimeter
G1 X191.046 Y95.230 E0.01621 ; perimeter
G1 X190.587 Y95.615 E0.02469 ; perimeter
G1 X190.379 Y95.467 E0.01054 ; perimeter
G1 X190.044 Y95.315 E0.01514 ; perimeter
G1 X189.540 Y95.192 E0.02138 ; perimeter
G1 X189.181 Y95.171 E0.01479 ; perimeter
G1 X188.828 Y95.203 E0.01463 ; perimeter
G1 X188.463 Y95.294 E0.01550 ; perimeter
G1 X187.986 Y95.512 E0.02159 ; perimeter
G1 X187.698 Y95.718 E0.01459 ; perimeter
G1 X167.976 Y112.267 E1.06060 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.986 Y114.661 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.892 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.038 Y114.240 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.18617 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X187.270 Y94.861 E1.05580 ; perimeter
G1 X187.600 Y94.619 E0.01687 ; perimeter
G1 X187.952 Y94.426 E0.01656 ; perimeter
G1 X188.327 Y94.280 E0.01656 ; perimeter
G1 X188.717 Y94.184 E0.01656 ; perimeter
G1 X189.117 Y94.140 E0.01656 ; perimeter
G1 X189.355 Y94.145 E0.00982 ; perimeter
G1 X189.519 Y94.149 E0.00673 ; perimeter
G1 X189.916 Y94.210 E0.01656 ; perimeter
G1 X190.302 Y94.322 E0.01656 ; perimeter
G1 X190.671 Y94.483 E0.01660 ; perimeter
G1 X190.960 Y94.654 E0.01380 ; perimeter
G1 X191.220 Y94.849 E0.01340 ; perimeter
G1 X191.448 Y95.062 E0.01285 ; perimeter
G1 X191.625 Y95.262 E0.01099 ; perimeter
G1 X190.600 Y96.121 E0.05509 ; perimeter
G1 X190.180 Y95.812 E0.02149 ; perimeter
G1 X189.914 Y95.691 E0.01204 ; perimeter
G1 X189.481 Y95.586 E0.01837 ; perimeter
G1 X189.188 Y95.568 E0.01210 ; perimeter
G1 X188.894 Y95.595 E0.01217 ; perimeter
G1 X188.594 Y95.669 E0.01271 ; perimeter
G1 X188.186 Y95.857 E0.01850 ; perimeter
G1 X187.941 Y96.032 E0.01240 ; perimeter
G1 X168.120 Y112.663 E1.06591 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X159.938 Y115.219 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.874 Y114.858 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;22.5


G1 F8640
G1 X159.038 Y114.240 E-0.30695 ; wipe and retract
G1 X160.541 Y112.979 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z22.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;22.5
G1 X84.089 Y102.247 ; move to first perimeter point
G1 Z22.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.106 Y102.247 E0.16408 ; perimeter
G1 X79.940 Y102.081 E0.00966 ; perimeter
G1 X79.940 Y101.804 E0.01141 ; perimeter
G1 X84.255 Y101.804 E0.17774 ; perimeter
G1 X84.255 Y102.081 E0.01141 ; perimeter
G1 X84.131 Y102.204 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.253 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.942 Y102.643 E0.17761 ; perimeter
G1 X79.544 Y102.245 E0.02319 ; perimeter
G1 X79.544 Y101.407 E0.03451 ; perimeter
G1 X84.651 Y101.407 E0.21040 ; perimeter
G1 X84.651 Y102.245 E0.03451 ; perimeter
G1 X84.296 Y102.600 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.417 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.778 Y103.039 E0.19113 ; perimeter
G1 X79.147 Y102.409 E0.03672 ; perimeter
G1 X79.147 Y101.011 E0.05760 ; perimeter
G1 X85.047 Y101.011 E0.24305 ; perimeter
G1 X85.047 Y102.409 E0.05760 ; perimeter
G1 X84.460 Y102.997 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.093 Y102.806 F10800.000 ; move inwards before travel
G1 F8640
G1 X81.168 Y103.027 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.100 F10800.000 ; lift Z
G1 X74.222 Y97.655 ; move to first perimeter point
G1 Z22.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.163 Y74.950 E1.45514 ; perimeter
G1 X46.882 Y74.678 E0.01610 ; perimeter
G1 X46.653 Y74.387 E0.01525 ; perimeter
G1 X46.471 Y74.073 E0.01495 ; perimeter
G1 X46.290 Y73.595 E0.02108 ; perimeter
G1 X46.216 Y73.239 E0.01496 ; perimeter
G1 X46.192 Y72.870 E0.01523 ; perimeter
G1 X46.219 Y72.497 E0.01543 ; perimeter
G1 X46.265 Y72.265 E0.00973 ; perimeter
G1 X46.428 Y71.782 E0.02101 ; perimeter
G1 X46.599 Y71.461 E0.01497 ; perimeter
G1 X46.830 Y71.143 E0.01621 ; perimeter
G1 X47.708 Y70.096 E0.05627 ; perimeter
G1 X48.118 Y70.440 E0.02205 ; perimeter
G1 X47.372 Y71.330 E0.04782 ; perimeter
G1 X47.148 Y71.650 E0.01612 ; perimeter
G1 X46.971 Y72.030 E0.01725 ; perimeter
G1 X46.862 Y72.434 E0.01725 ; perimeter
G1 X46.826 Y72.851 E0.01725 ; perimeter
G1 X46.862 Y73.268 E0.01725 ; perimeter
G1 X46.971 Y73.673 E0.01725 ; perimeter
G1 X47.148 Y74.052 E0.01725 ; perimeter
G1 X47.388 Y74.395 E0.01725 ; perimeter
G1 X47.664 Y74.672 E0.01612 ; perimeter
G1 X74.566 Y97.245 E1.44668 ; perimeter
G1 X74.260 Y97.609 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X74.270 Y98.213 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.898 Y75.245 E1.47203 ; perimeter
G1 X46.587 Y74.945 E0.01780 ; perimeter
G1 X46.324 Y74.610 E0.01752 ; perimeter
G1 X46.112 Y74.244 E0.01743 ; perimeter
G1 X45.908 Y73.706 E0.02371 ; perimeter
G1 X45.823 Y73.293 E0.01737 ; perimeter
G1 X45.794 Y72.869 E0.01750 ; perimeter
G1 X45.825 Y72.443 E0.01759 ; perimeter
G1 X45.882 Y72.163 E0.01178 ; perimeter
G1 X46.063 Y71.625 E0.02339 ; perimeter
G1 X46.262 Y71.250 E0.01747 ; perimeter
G1 X46.518 Y70.899 E0.01792 ; perimeter
G1 X47.659 Y69.538 E0.07317 ; perimeter
G1 X48.677 Y70.392 E0.05471 ; perimeter
G1 X47.687 Y71.571 E0.06343 ; perimeter
G1 X47.492 Y71.849 E0.01398 ; perimeter
G1 X47.344 Y72.166 E0.01439 ; perimeter
G1 X47.254 Y72.503 E0.01439 ; perimeter
G1 X47.224 Y72.851 E0.01439 ; perimeter
G1 X47.254 Y73.199 E0.01439 ; perimeter
G1 X47.344 Y73.537 E0.01439 ; perimeter
G1 X47.492 Y73.853 E0.01439 ; perimeter
G1 X47.692 Y74.139 E0.01439 ; perimeter
G1 X47.932 Y74.379 E0.01398 ; perimeter
G1 X75.124 Y97.196 E1.46229 ; perimeter
G1 X74.309 Y98.167 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X73.967 Y97.952 F10800.000 ; move inwards before travel
G1 F8640
G1 X71.784 Y96.056 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.100 F10800.000 ; lift Z
G1 X89.774 Y76.553 ; move to first perimeter point
G1 Z22.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.15587 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X62.017 Y57.572 E1.06059 ; perimeter
G1 X61.733 Y57.368 E0.01442 ; perimeter
G1 X61.246 Y57.145 E0.02207 ; perimeter
G1 X60.870 Y57.053 E0.01593 ; perimeter
G1 X60.330 Y57.030 E0.02225 ; perimeter
G1 X59.893 Y57.104 E0.01828 ; perimeter
G1 X59.655 Y57.176 E0.01026 ; perimeter
G1 X59.356 Y57.311 E0.01349 ; perimeter
G1 X59.139 Y57.448 E0.01059 ; perimeter
G1 X58.684 Y57.066 E0.02447 ; perimeter
G1 X58.980 Y56.835 E0.01549 ; perimeter
G1 X59.225 Y56.691 E0.01171 ; perimeter
G1 X59.548 Y56.549 E0.01456 ; perimeter
G1 X59.885 Y56.451 E0.01442 ; perimeter
G1 X60.231 Y56.398 E0.01442 ; perimeter
G1 X60.696 Y56.404 E0.01918 ; perimeter
G1 X60.928 Y56.429 E0.00962 ; perimeter
G1 X61.268 Y56.513 E0.01443 ; perimeter
G1 X61.595 Y56.640 E0.01442 ; perimeter
G1 X61.902 Y56.808 E0.01442 ; perimeter
G1 X62.200 Y57.027 E0.01526 ; perimeter
G1 X81.934 Y73.586 E1.06121 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.118 Y76.143 E0.16390 ; perimeter
G1 X89.813 Y76.507 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.823 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.16626 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X61.774 Y57.886 E1.06591 ; perimeter
G1 X61.533 Y57.713 E0.01222 ; perimeter
G1 X61.115 Y57.521 E0.01895 ; perimeter
G1 X60.814 Y57.447 E0.01276 ; perimeter
G1 X60.355 Y57.428 E0.01892 ; perimeter
G1 X59.983 Y57.491 E0.01552 ; perimeter
G1 X59.794 Y57.548 E0.00814 ; perimeter
G1 X59.544 Y57.661 E0.01130 ; perimeter
G1 X59.321 Y57.802 E0.01088 ; perimeter
G1 X59.130 Y57.958 E0.01016 ; perimeter
G1 X58.106 Y57.099 E0.05507 ; perimeter
G1 X58.324 Y56.855 E0.01349 ; perimeter
G1 X58.760 Y56.505 E0.02304 ; perimeter
G1 X59.044 Y56.337 E0.01356 ; perimeter
G1 X59.413 Y56.175 E0.01661 ; perimeter
G1 X59.799 Y56.063 E0.01656 ; perimeter
G1 X60.196 Y56.003 E0.01656 ; perimeter
G1 X60.598 Y55.994 E0.01656 ; perimeter
G1 X60.998 Y56.038 E0.01655 ; perimeter
G1 X61.388 Y56.134 E0.01656 ; perimeter
G1 X61.763 Y56.280 E0.01656 ; perimeter
G1 X62.115 Y56.473 E0.01656 ; perimeter
G1 X62.445 Y56.715 E0.01686 ; perimeter
G1 X82.078 Y73.189 E1.05580 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X90.677 Y76.094 E0.18617 ; perimeter
G1 X89.862 Y77.065 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.543 Y76.826 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.309 Y74.987 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.100 F10800.000 ; lift Z
G1 X165.911 Y102.247 ; move to first perimeter point
G1 Z22.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.745 Y102.081 E0.00966 ; perimeter
G1 X165.745 Y101.804 E0.01141 ; perimeter
G1 X170.060 Y101.804 E0.17774 ; perimeter
G1 X170.060 Y102.081 E0.01141 ; perimeter
G1 X169.894 Y102.247 E0.00966 ; perimeter
G1 X165.971 Y102.247 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.747 Y102.643 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.349 Y102.245 E0.02319 ; perimeter
G1 X165.349 Y101.407 E0.03451 ; perimeter
G1 X170.456 Y101.407 E0.21040 ; perimeter
G1 X170.456 Y102.245 E0.03451 ; perimeter
G1 X170.058 Y102.643 E0.02319 ; perimeter
G1 X165.807 Y102.643 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.583 Y103.039 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.953 Y102.409 E0.03672 ; perimeter
G1 X164.953 Y101.011 E0.05760 ; perimeter
G1 X170.853 Y101.011 E0.24306 ; perimeter
G1 X170.853 Y102.409 E0.05760 ; perimeter
G1 X170.222 Y103.039 E0.03672 ; perimeter
G1 X165.643 Y103.039 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.567 Y102.640 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.953 Y102.409 E-0.21581 ; wipe and retract
G1 X164.953 Y101.011 E-0.32283 ; wipe and retract
G1 X165.911 Y101.011 E-0.22136 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.100 F10800.000 ; lift Z
G1 X175.778 Y97.655 ; move to first perimeter point
G1 Z22.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X175.434 Y97.245 E0.02205 ; perimeter
G1 X202.336 Y74.672 E1.44667 ; perimeter
G1 X202.612 Y74.395 E0.01613 ; perimeter
G1 X202.852 Y74.052 E0.01725 ; perimeter
G1 X203.029 Y73.673 E0.01725 ; perimeter
G1 X203.138 Y73.268 E0.01725 ; perimeter
G1 X203.174 Y72.851 E0.01725 ; perimeter
G1 X203.138 Y72.434 E0.01725 ; perimeter
G1 X203.029 Y72.030 E0.01725 ; perimeter
G1 X202.852 Y71.650 E0.01725 ; perimeter
G1 X202.628 Y71.330 E0.01612 ; perimeter
G1 X201.882 Y70.440 E0.04782 ; perimeter
G1 X202.292 Y70.096 E0.02205 ; perimeter
G1 X203.170 Y71.143 E0.05627 ; perimeter
G1 X203.401 Y71.461 E0.01621 ; perimeter
G1 X203.572 Y71.782 E0.01497 ; perimeter
G1 X203.735 Y72.265 E0.02101 ; perimeter
G1 X203.781 Y72.497 E0.00973 ; perimeter
G1 X203.808 Y72.864 E0.01515 ; perimeter
G1 X203.763 Y73.368 E0.02087 ; perimeter
G1 X203.674 Y73.722 E0.01505 ; perimeter
G1 X203.532 Y74.070 E0.01544 ; perimeter
G1 X203.411 Y74.283 E0.01011 ; perimeter
G1 X203.118 Y74.678 E0.02026 ; perimeter
G1 X202.837 Y74.950 E0.01610 ; perimeter
G1 X175.824 Y97.616 E1.45266 ; perimeter
M204 S1000 ; adjust acceleration
G1 X175.730 Y98.213 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X174.876 Y97.196 E0.05471 ; perimeter
G1 X202.068 Y74.379 E1.46229 ; perimeter
G1 X202.308 Y74.139 E0.01398 ; perimeter
G1 X202.508 Y73.853 E0.01439 ; perimeter
G1 X202.656 Y73.537 E0.01439 ; perimeter
G1 X202.746 Y73.199 E0.01439 ; perimeter
G1 X202.776 Y72.851 E0.01439 ; perimeter
G1 X202.746 Y72.503 E0.01439 ; perimeter
G1 X202.656 Y72.166 E0.01439 ; perimeter
G1 X202.508 Y71.849 E0.01439 ; perimeter
G1 X202.313 Y71.571 E0.01398 ; perimeter
G1 X201.323 Y70.392 E0.06343 ; perimeter
G1 X202.341 Y69.538 E0.05471 ; perimeter
G1 X203.482 Y70.899 E0.07317 ; perimeter
G1 X203.738 Y71.250 E0.01792 ; perimeter
G1 X203.938 Y71.625 E0.01747 ; perimeter
G1 X204.118 Y72.163 E0.02339 ; perimeter
G1 X204.175 Y72.443 E0.01178 ; perimeter
G1 X204.205 Y72.867 E0.01749 ; perimeter
G1 X204.155 Y73.435 E0.02349 ; perimeter
G1 X204.051 Y73.847 E0.01750 ; perimeter
G1 X203.889 Y74.243 E0.01763 ; perimeter
G1 X203.753 Y74.484 E0.01140 ; perimeter
G1 X203.677 Y74.608 E0.00601 ; perimeter
G1 X203.413 Y74.945 E0.01761 ; perimeter
G1 X203.102 Y75.245 E0.01780 ; perimeter
G1 X175.776 Y98.174 E1.46956 ; perimeter
M204 S1000 ; adjust acceleration
G1 X175.660 Y97.819 F10800.000 ; move inwards before travel
G1 F8640
G1 X174.876 Y97.196 E-0.30695 ; wipe and retract
G1 X176.379 Y95.935 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.100 F10800.000 ; lift Z
G1 X160.226 Y76.553 ; move to first perimeter point
G1 Z22.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.882 Y76.143 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.16390 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X187.800 Y57.027 E1.06121 ; perimeter
G1 X188.098 Y56.808 E0.01526 ; perimeter
G1 X188.405 Y56.640 E0.01442 ; perimeter
G1 X188.732 Y56.513 E0.01442 ; perimeter
G1 X189.072 Y56.429 E0.01442 ; perimeter
G1 X189.420 Y56.391 E0.01443 ; perimeter
G1 X189.769 Y56.398 E0.01440 ; perimeter
G1 X190.115 Y56.451 E0.01443 ; perimeter
G1 X190.452 Y56.549 E0.01442 ; perimeter
G1 X190.775 Y56.691 E0.01456 ; perimeter
G1 X191.020 Y56.835 E0.01171 ; perimeter
G1 X191.316 Y57.066 E0.01549 ; perimeter
G1 X190.861 Y57.448 E0.02447 ; perimeter
G1 X190.644 Y57.311 E0.01059 ; perimeter
G1 X190.345 Y57.176 E0.01349 ; perimeter
G1 X190.107 Y57.104 E0.01026 ; perimeter
G1 X189.670 Y57.030 E0.01828 ; perimeter
G1 X189.130 Y57.053 E0.02225 ; perimeter
G1 X188.754 Y57.145 E0.01593 ; perimeter
G1 X188.267 Y57.368 E0.02207 ; perimeter
G1 X187.983 Y57.572 E0.01442 ; perimeter
G1 X168.261 Y74.121 E1.06059 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X160.272 Y76.514 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.177 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.323 Y76.094 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.18617 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X187.555 Y56.715 E1.05580 ; perimeter
G1 X187.885 Y56.473 E0.01686 ; perimeter
G1 X188.237 Y56.280 E0.01656 ; perimeter
G1 X188.612 Y56.134 E0.01656 ; perimeter
G1 X189.002 Y56.038 E0.01656 ; perimeter
G1 X189.402 Y55.994 E0.01656 ; perimeter
G1 X189.666 Y56.000 E0.01087 ; perimeter
G1 X189.804 Y56.003 E0.00568 ; perimeter
G1 X190.201 Y56.063 E0.01656 ; perimeter
G1 X190.587 Y56.175 E0.01656 ; perimeter
G1 X190.956 Y56.337 E0.01661 ; perimeter
G1 X191.240 Y56.505 E0.01356 ; perimeter
G1 X191.676 Y56.855 E0.02304 ; perimeter
G1 X191.894 Y57.099 E0.01349 ; perimeter
G1 X190.870 Y57.958 E0.05507 ; perimeter
G1 X190.679 Y57.802 E0.01016 ; perimeter
G1 X190.456 Y57.661 E0.01088 ; perimeter
G1 X190.206 Y57.548 E0.01130 ; perimeter
G1 X190.017 Y57.491 E0.00815 ; perimeter
G1 X189.645 Y57.428 E0.01553 ; perimeter
G1 X189.186 Y57.447 E0.01892 ; perimeter
G1 X188.885 Y57.521 E0.01276 ; perimeter
G1 X188.467 Y57.713 E0.01895 ; perimeter
G1 X188.226 Y57.886 E0.01222 ; perimeter
G1 X168.405 Y74.517 E1.06591 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X160.223 Y77.073 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.159 Y76.712 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.323 Y76.094 E-0.30695 ; wipe and retract
G1 X160.826 Y74.833 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.100 F10800.000 ; lift Z
G1 X83.804 Y140.393 ; move to first perimeter point
G1 Z22.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.821 Y140.393 E0.16408 ; perimeter
G1 X79.655 Y140.227 E0.00966 ; perimeter
G1 X79.655 Y139.950 E0.01141 ; perimeter
G1 X83.970 Y139.950 E0.17774 ; perimeter
G1 X83.970 Y140.227 E0.01141 ; perimeter
G1 X83.846 Y140.350 E0.00719 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.968 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.657 Y140.789 E0.17761 ; perimeter
G1 X79.259 Y140.391 E0.02319 ; perimeter
G1 X79.259 Y139.553 E0.03451 ; perimeter
G1 X84.366 Y139.553 E0.21040 ; perimeter
G1 X84.366 Y140.391 E0.03451 ; perimeter
G1 X84.010 Y140.747 E0.02072 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.132 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.492 Y141.185 E0.19113 ; perimeter
G1 X78.862 Y140.555 E0.03672 ; perimeter
G1 X78.862 Y139.157 E0.05760 ; perimeter
G1 X84.762 Y139.157 E0.24305 ; perimeter
G1 X84.762 Y140.555 E0.05760 ; perimeter
G1 X84.175 Y141.143 E0.03424 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.807 Y140.952 F10800.000 ; move inwards before travel
G1 F8640
G1 X80.883 Y141.173 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.100 F10800.000 ; lift Z
G1 X73.936 Y135.801 ; move to first perimeter point
G1 Z22.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X46.878 Y113.096 E1.45514 ; perimeter
G1 X46.596 Y112.825 E0.01610 ; perimeter
G1 X46.368 Y112.533 E0.01525 ; perimeter
G1 X46.186 Y112.220 E0.01495 ; perimeter
G1 X46.005 Y111.741 E0.02108 ; perimeter
G1 X45.931 Y111.385 E0.01496 ; perimeter
G1 X45.907 Y111.017 E0.01523 ; perimeter
G1 X45.934 Y110.643 E0.01543 ; perimeter
G1 X45.980 Y110.411 E0.00973 ; perimeter
G1 X46.143 Y109.928 E0.02101 ; perimeter
G1 X46.313 Y109.607 E0.01497 ; perimeter
G1 X46.545 Y109.289 E0.01621 ; perimeter
G1 X47.423 Y108.243 E0.05627 ; perimeter
G1 X47.833 Y108.587 E0.02205 ; perimeter
G1 X47.087 Y109.476 E0.04782 ; perimeter
G1 X46.862 Y109.796 E0.01612 ; perimeter
G1 X46.685 Y110.176 E0.01725 ; perimeter
G1 X46.577 Y110.580 E0.01725 ; perimeter
G1 X46.541 Y110.997 E0.01725 ; perimeter
G1 X46.577 Y111.414 E0.01725 ; perimeter
G1 X46.685 Y111.819 E0.01725 ; perimeter
G1 X46.862 Y112.198 E0.01725 ; perimeter
G1 X47.102 Y112.541 E0.01725 ; perimeter
G1 X47.379 Y112.818 E0.01612 ; perimeter
G1 X74.280 Y135.391 E1.44668 ; perimeter
G1 X73.975 Y135.755 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X73.985 Y136.359 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.613 Y113.391 E1.47203 ; perimeter
G1 X46.302 Y113.091 E0.01780 ; perimeter
G1 X46.039 Y112.756 E0.01752 ; perimeter
G1 X45.827 Y112.390 E0.01743 ; perimeter
G1 X45.623 Y111.852 E0.02371 ; perimeter
G1 X45.537 Y111.439 E0.01737 ; perimeter
G1 X45.509 Y111.015 E0.01750 ; perimeter
G1 X45.540 Y110.589 E0.01759 ; perimeter
G1 X45.597 Y110.309 E0.01178 ; perimeter
G1 X45.777 Y109.771 E0.02339 ; perimeter
G1 X45.977 Y109.397 E0.01747 ; perimeter
G1 X46.232 Y109.045 E0.01792 ; perimeter
G1 X47.374 Y107.684 E0.07317 ; perimeter
G1 X48.391 Y108.538 E0.05471 ; perimeter
G1 X47.402 Y109.717 E0.06343 ; perimeter
G1 X47.207 Y109.995 E0.01398 ; perimeter
G1 X47.059 Y110.312 E0.01439 ; perimeter
G1 X46.969 Y110.649 E0.01439 ; perimeter
G1 X46.938 Y110.997 E0.01439 ; perimeter
G1 X46.969 Y111.345 E0.01439 ; perimeter
G1 X47.059 Y111.683 E0.01439 ; perimeter
G1 X47.207 Y111.999 E0.01439 ; perimeter
G1 X47.407 Y112.285 E0.01439 ; perimeter
G1 X47.647 Y112.525 E0.01398 ; perimeter
G1 X74.839 Y135.342 E1.46229 ; perimeter
G1 X74.024 Y136.313 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X73.682 Y136.098 F10800.000 ; move inwards before travel
G1 F8640
G1 X71.499 Y134.202 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.100 F10800.000 ; lift Z
G1 X89.489 Y114.699 ; move to first perimeter point
G1 Z22.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.15587 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X61.732 Y95.718 E1.06059 ; perimeter
G1 X61.447 Y95.515 E0.01442 ; perimeter
G1 X60.960 Y95.291 E0.02207 ; perimeter
G1 X60.585 Y95.199 E0.01593 ; perimeter
G1 X60.045 Y95.176 E0.02225 ; perimeter
G1 X59.608 Y95.250 E0.01828 ; perimeter
G1 X59.369 Y95.322 E0.01026 ; perimeter
G1 X59.071 Y95.457 E0.01349 ; perimeter
G1 X58.853 Y95.594 E0.01059 ; perimeter
G1 X58.398 Y95.212 E0.02447 ; perimeter
G1 X58.695 Y94.981 E0.01549 ; perimeter
G1 X58.940 Y94.837 E0.01171 ; perimeter
G1 X59.263 Y94.695 E0.01456 ; perimeter
G1 X59.599 Y94.597 E0.01442 ; perimeter
G1 X59.945 Y94.544 E0.01442 ; perimeter
G1 X60.411 Y94.550 E0.01918 ; perimeter
G1 X60.643 Y94.575 E0.00962 ; perimeter
G1 X60.983 Y94.659 E0.01443 ; perimeter
G1 X61.309 Y94.786 E0.01442 ; perimeter
G1 X61.616 Y94.954 E0.01442 ; perimeter
G1 X61.915 Y95.173 E0.01526 ; perimeter
G1 X81.649 Y111.732 E1.06121 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X89.833 Y114.289 E0.16390 ; perimeter
G1 X89.528 Y114.653 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.538 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.16626 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X61.489 Y96.032 E1.06591 ; perimeter
G1 X61.248 Y95.859 E0.01222 ; perimeter
G1 X60.830 Y95.667 E0.01895 ; perimeter
G1 X60.529 Y95.594 E0.01276 ; perimeter
G1 X60.070 Y95.574 E0.01892 ; perimeter
G1 X59.698 Y95.637 E0.01552 ; perimeter
G1 X59.509 Y95.694 E0.00814 ; perimeter
G1 X59.259 Y95.807 E0.01130 ; perimeter
G1 X59.036 Y95.948 E0.01088 ; perimeter
G1 X58.845 Y96.104 E0.01016 ; perimeter
G1 X57.821 Y95.245 E0.05507 ; perimeter
G1 X58.039 Y95.001 E0.01349 ; perimeter
G1 X58.475 Y94.651 E0.02304 ; perimeter
G1 X58.759 Y94.483 E0.01356 ; perimeter
G1 X59.128 Y94.322 E0.01661 ; perimeter
G1 X59.514 Y94.209 E0.01656 ; perimeter
G1 X59.911 Y94.149 E0.01656 ; perimeter
G1 X60.313 Y94.140 E0.01656 ; perimeter
G1 X60.712 Y94.184 E0.01655 ; perimeter
G1 X61.103 Y94.280 E0.01656 ; perimeter
G1 X61.477 Y94.426 E0.01656 ; perimeter
G1 X61.830 Y94.619 E0.01656 ; perimeter
G1 X62.160 Y94.861 E0.01686 ; perimeter
G1 X81.793 Y111.335 E1.05580 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X90.392 Y114.240 E0.18617 ; perimeter
G1 X89.577 Y115.212 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.257 Y114.972 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.024 Y113.134 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.100 F10800.000 ; lift Z
G1 X165.626 Y140.393 ; move to first perimeter point
G1 Z22.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.460 Y140.227 E0.00966 ; perimeter
G1 X165.460 Y139.950 E0.01141 ; perimeter
G1 X169.775 Y139.950 E0.17774 ; perimeter
G1 X169.775 Y140.227 E0.01141 ; perimeter
G1 X169.609 Y140.393 E0.00966 ; perimeter
G1 X165.686 Y140.393 E0.16161 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.462 Y140.789 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.064 Y140.391 E0.02319 ; perimeter
G1 X165.064 Y139.553 E0.03451 ; perimeter
G1 X170.171 Y139.553 E0.21040 ; perimeter
G1 X170.171 Y140.391 E0.03451 ; perimeter
G1 X169.773 Y140.789 E0.02319 ; perimeter
G1 X165.522 Y140.789 E0.17513 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.298 Y141.185 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.667 Y140.555 E0.03672 ; perimeter
G1 X164.667 Y139.157 E0.05760 ; perimeter
G1 X170.567 Y139.157 E0.24306 ; perimeter
G1 X170.567 Y140.555 E0.05760 ; perimeter
G1 X169.937 Y141.185 E0.03672 ; perimeter
G1 X165.358 Y141.185 E0.18866 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.282 Y140.786 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.667 Y140.555 E-0.21581 ; wipe and retract
G1 X164.667 Y139.157 E-0.32283 ; wipe and retract
G1 X165.626 Y139.157 E-0.22136 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.100 F10800.000 ; lift Z
G1 X175.493 Y135.801 ; move to first perimeter point
G1 Z22.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X175.149 Y135.391 E0.02205 ; perimeter
G1 X202.050 Y112.818 E1.44667 ; perimeter
G1 X202.327 Y112.541 E0.01613 ; perimeter
G1 X202.567 Y112.198 E0.01725 ; perimeter
G1 X202.744 Y111.819 E0.01725 ; perimeter
G1 X202.853 Y111.414 E0.01725 ; perimeter
G1 X202.889 Y110.997 E0.01725 ; perimeter
G1 X202.853 Y110.580 E0.01725 ; perimeter
G1 X202.744 Y110.176 E0.01725 ; perimeter
G1 X202.567 Y109.796 E0.01725 ; perimeter
G1 X202.343 Y109.476 E0.01612 ; perimeter
G1 X201.597 Y108.587 E0.04782 ; perimeter
G1 X202.007 Y108.243 E0.02205 ; perimeter
G1 X202.885 Y109.289 E0.05627 ; perimeter
G1 X203.116 Y109.607 E0.01621 ; perimeter
G1 X203.287 Y109.928 E0.01497 ; perimeter
G1 X203.449 Y110.411 E0.02101 ; perimeter
G1 X203.496 Y110.643 E0.00973 ; perimeter
G1 X203.523 Y111.010 E0.01515 ; perimeter
G1 X203.478 Y111.514 E0.02087 ; perimeter
G1 X203.388 Y111.869 E0.01505 ; perimeter
G1 X203.247 Y112.216 E0.01544 ; perimeter
G1 X203.126 Y112.429 E0.01011 ; perimeter
G1 X202.833 Y112.825 E0.02026 ; perimeter
G1 X202.552 Y113.096 E0.01610 ; perimeter
G1 X175.539 Y135.762 E1.45266 ; perimeter
M204 S1000 ; adjust acceleration
G1 X175.444 Y136.359 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X174.591 Y135.342 E0.05471 ; perimeter
G1 X201.782 Y112.525 E1.46229 ; perimeter
G1 X202.022 Y112.285 E0.01398 ; perimeter
G1 X202.223 Y111.999 E0.01439 ; perimeter
G1 X202.370 Y111.683 E0.01439 ; perimeter
G1 X202.461 Y111.345 E0.01439 ; perimeter
G1 X202.491 Y110.997 E0.01439 ; perimeter
G1 X202.461 Y110.649 E0.01439 ; perimeter
G1 X202.370 Y110.312 E0.01439 ; perimeter
G1 X202.223 Y109.995 E0.01439 ; perimeter
G1 X202.028 Y109.717 E0.01398 ; perimeter
G1 X201.038 Y108.538 E0.06343 ; perimeter
G1 X202.056 Y107.684 E0.05471 ; perimeter
G1 X203.197 Y109.045 E0.07317 ; perimeter
G1 X203.453 Y109.397 E0.01792 ; perimeter
G1 X203.652 Y109.771 E0.01747 ; perimeter
G1 X203.833 Y110.309 E0.02339 ; perimeter
G1 X203.889 Y110.589 E0.01178 ; perimeter
G1 X203.920 Y111.013 E0.01749 ; perimeter
G1 X203.870 Y111.581 E0.02349 ; perimeter
G1 X203.766 Y111.993 E0.01750 ; perimeter
G1 X203.604 Y112.389 E0.01763 ; perimeter
G1 X203.468 Y112.630 E0.01140 ; perimeter
G1 X203.392 Y112.755 E0.00601 ; perimeter
G1 X203.128 Y113.091 E0.01761 ; perimeter
G1 X202.817 Y113.391 E0.01780 ; perimeter
G1 X175.490 Y136.321 E1.46956 ; perimeter
M204 S1000 ; adjust acceleration
G1 X175.375 Y135.965 F10800.000 ; move inwards before travel
G1 F8640
G1 X174.591 Y135.342 E-0.30695 ; wipe and retract
G1 X176.094 Y134.081 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.100 F10800.000 ; lift Z
G1 X159.940 Y114.699 ; move to first perimeter point
G1 Z22.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M73 Q97 S4
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.596 Y114.289 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.16390 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X187.515 Y95.173 E1.06121 ; perimeter
G1 X187.813 Y94.954 E0.01526 ; perimeter
G1 X188.120 Y94.786 E0.01442 ; perimeter
G1 X188.446 Y94.659 E0.01442 ; perimeter
G1 X188.786 Y94.575 E0.01442 ; perimeter
G1 X189.134 Y94.537 E0.01443 ; perimeter
G1 X189.484 Y94.544 E0.01440 ; perimeter
G1 X189.830 Y94.597 E0.01443 ; perimeter
G1 X190.166 Y94.695 E0.01442 ; perimeter
G1 X190.490 Y94.837 E0.01456 ; perimeter
G1 X190.735 Y94.981 E0.01171 ; perimeter
G1 X191.031 Y95.212 E0.01549 ; perimeter
G1 X190.576 Y95.594 E0.02447 ; perimeter
G1 X190.359 Y95.457 E0.01059 ; perimeter
G1 X190.060 Y95.322 E0.01349 ; perimeter
G1 X189.822 Y95.250 E0.01026 ; perimeter
G1 X189.385 Y95.176 E0.01828 ; perimeter
G1 X188.845 Y95.199 E0.02225 ; perimeter
G1 X188.469 Y95.291 E0.01593 ; perimeter
G1 X187.982 Y95.515 E0.02207 ; perimeter
G1 X187.698 Y95.718 E0.01442 ; perimeter
G1 X167.976 Y112.267 E1.06059 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.986 Y114.661 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.892 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.038 Y114.240 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.18617 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X187.270 Y94.861 E1.05580 ; perimeter
G1 X187.600 Y94.619 E0.01686 ; perimeter
G1 X187.952 Y94.426 E0.01656 ; perimeter
G1 X188.327 Y94.280 E0.01656 ; perimeter
G1 X188.717 Y94.184 E0.01656 ; perimeter
G1 X189.117 Y94.140 E0.01656 ; perimeter
G1 X189.380 Y94.146 E0.01087 ; perimeter
G1 X189.518 Y94.149 E0.00568 ; perimeter
G1 X189.916 Y94.209 E0.01656 ; perimeter
G1 X190.302 Y94.322 E0.01656 ; perimeter
G1 X190.671 Y94.483 E0.01661 ; perimeter
G1 X190.955 Y94.651 E0.01356 ; perimeter
G1 X191.391 Y95.001 E0.02304 ; perimeter
G1 X191.609 Y95.245 E0.01349 ; perimeter
G1 X190.585 Y96.104 E0.05507 ; perimeter
G1 X190.394 Y95.948 E0.01016 ; perimeter
G1 X190.170 Y95.807 E0.01088 ; perimeter
G1 X189.921 Y95.694 E0.01130 ; perimeter
G1 X189.731 Y95.637 E0.00815 ; perimeter
G1 X189.360 Y95.574 E0.01553 ; perimeter
G1 X188.901 Y95.594 E0.01892 ; perimeter
G1 X188.600 Y95.667 E0.01276 ; perimeter
G1 X188.182 Y95.859 E0.01895 ; perimeter
G1 X187.941 Y96.032 E0.01222 ; perimeter
G1 X168.120 Y112.663 E1.06591 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X159.938 Y115.219 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.874 Y114.858 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;22.75


G1 F8640
G1 X159.038 Y114.240 E-0.30695 ; wipe and retract
G1 X160.541 Y112.979 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;22.75
G1 X84.108 Y102.228 ; move to first perimeter point
G1 Z22.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.087 Y102.228 E0.16564 ; perimeter
G1 X79.959 Y102.100 E0.00745 ; perimeter
G1 X79.959 Y101.948 E0.00625 ; perimeter
G1 X84.236 Y101.948 E0.17618 ; perimeter
G1 X84.236 Y102.100 E0.00625 ; perimeter
G1 X84.150 Y102.185 E0.00498 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.272 Y102.624 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.923 Y102.624 E0.17917 ; perimeter
G1 X79.563 Y102.264 E0.02097 ; perimeter
G1 X79.563 Y101.552 E0.02934 ; perimeter
G1 X84.632 Y101.552 E0.20883 ; perimeter
G1 X84.632 Y102.264 E0.02934 ; perimeter
G1 X84.315 Y102.581 E0.01850 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.436 Y103.020 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.759 Y103.020 E0.19270 ; perimeter
G1 X79.166 Y102.428 E0.03450 ; perimeter
G1 X79.166 Y101.155 E0.05243 ; perimeter
G1 X85.028 Y101.155 E0.24149 ; perimeter
G1 X85.028 Y102.428 E0.05243 ; perimeter
G1 X84.479 Y102.978 E0.03203 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.112 Y102.786 F10800.000 ; move inwards before travel
G1 F8640
G1 X81.187 Y103.007 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.350 F10800.000 ; lift Z
G1 X74.030 Y97.494 ; move to first perimeter point
G1 Z22.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.163 Y74.950 E1.44483 ; perimeter
G1 X46.880 Y74.677 E0.01619 ; perimeter
G1 X46.651 Y74.384 E0.01533 ; perimeter
G1 X46.468 Y74.067 E0.01508 ; perimeter
G1 X46.294 Y73.609 E0.02019 ; perimeter
G1 X46.218 Y73.250 E0.01510 ; perimeter
G1 X46.192 Y72.879 E0.01532 ; perimeter
G1 X46.218 Y72.505 E0.01548 ; perimeter
G1 X46.269 Y72.249 E0.01074 ; perimeter
G1 X46.426 Y71.786 E0.02013 ; perimeter
G1 X46.598 Y71.463 E0.01510 ; perimeter
G1 X46.830 Y71.143 E0.01629 ; perimeter
G1 X47.547 Y70.288 E0.04597 ; perimeter
G1 X47.957 Y70.632 E0.02205 ; perimeter
G1 X47.372 Y71.330 E0.03752 ; perimeter
G1 X47.148 Y71.650 E0.01612 ; perimeter
G1 X46.971 Y72.030 E0.01725 ; perimeter
G1 X46.862 Y72.434 E0.01725 ; perimeter
G1 X46.826 Y72.851 E0.01725 ; perimeter
G1 X46.862 Y73.268 E0.01725 ; perimeter
G1 X46.971 Y73.673 E0.01725 ; perimeter
G1 X47.148 Y74.052 E0.01725 ; perimeter
G1 X47.388 Y74.395 E0.01725 ; perimeter
G1 X47.664 Y74.672 E0.01612 ; perimeter
G1 X74.374 Y97.084 E1.43638 ; perimeter
G1 X74.069 Y97.448 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X74.079 Y98.052 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.898 Y75.245 E1.46173 ; perimeter
G1 X46.585 Y74.943 E0.01790 ; perimeter
G1 X46.322 Y74.606 E0.01761 ; perimeter
G1 X46.108 Y74.238 E0.01754 ; perimeter
G1 X45.912 Y73.721 E0.02277 ; perimeter
G1 X45.824 Y73.306 E0.01749 ; perimeter
G1 X45.794 Y72.879 E0.01760 ; perimeter
G1 X45.824 Y72.452 E0.01767 ; perimeter
G1 X45.886 Y72.146 E0.01283 ; perimeter
G1 X46.061 Y71.629 E0.02250 ; perimeter
G1 X46.261 Y71.252 E0.01757 ; perimeter
G1 X46.518 Y70.899 E0.01800 ; perimeter
G1 X47.499 Y69.730 E0.06287 ; perimeter
G1 X48.516 Y70.583 E0.05471 ; perimeter
G1 X47.687 Y71.571 E0.05314 ; perimeter
G1 X47.492 Y71.849 E0.01398 ; perimeter
G1 X47.344 Y72.166 E0.01439 ; perimeter
G1 X47.254 Y72.503 E0.01439 ; perimeter
G1 X47.224 Y72.851 E0.01439 ; perimeter
G1 X47.254 Y73.199 E0.01439 ; perimeter
G1 X47.344 Y73.537 E0.01439 ; perimeter
G1 X47.492 Y73.853 E0.01439 ; perimeter
G1 X47.692 Y74.139 E0.01439 ; perimeter
G1 X47.932 Y74.379 E0.01398 ; perimeter
G1 X74.933 Y97.035 E1.45199 ; perimeter
G1 X74.117 Y98.006 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X73.776 Y97.791 F10800.000 ; move inwards before travel
G1 F8640
G1 X71.593 Y95.895 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.350 F10800.000 ; lift Z
G1 X89.774 Y76.553 ; move to first perimeter point
G1 Z22.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.15587 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X62.017 Y57.573 E1.06057 ; perimeter
M73 P97 R3
G1 X61.737 Y57.371 E0.01424 ; perimeter
G1 X61.239 Y57.143 E0.02255 ; perimeter
G1 X60.882 Y57.056 E0.01512 ; perimeter
G1 X60.527 Y57.024 E0.01469 ; perimeter
G1 X59.989 Y57.077 E0.02227 ; perimeter
G1 X59.656 Y57.175 E0.01430 ; perimeter
G1 X59.361 Y57.308 E0.01334 ; perimeter
G1 X58.883 Y56.907 E0.02571 ; perimeter
G1 X59.225 Y56.691 E0.01666 ; perimeter
G1 X59.549 Y56.549 E0.01457 ; perimeter
G1 X59.885 Y56.451 E0.01442 ; perimeter
G1 X60.231 Y56.398 E0.01442 ; perimeter
G1 X60.670 Y56.401 E0.01811 ; perimeter
G1 X60.929 Y56.429 E0.01070 ; perimeter
G1 X61.269 Y56.513 E0.01442 ; perimeter
G1 X61.595 Y56.640 E0.01442 ; perimeter
G1 X61.902 Y56.808 E0.01442 ; perimeter
G1 X62.200 Y57.027 E0.01526 ; perimeter
G1 X81.934 Y73.586 E1.06121 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.118 Y76.143 E0.16390 ; perimeter
G1 X89.813 Y76.507 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.823 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.16626 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X61.774 Y57.886 E1.06590 ; perimeter
G1 X61.537 Y57.715 E0.01204 ; perimeter
G1 X61.109 Y57.519 E0.01939 ; perimeter
G1 X60.817 Y57.448 E0.01235 ; perimeter
G1 X60.529 Y57.422 E0.01193 ; perimeter
G1 X60.065 Y57.468 E0.01918 ; perimeter
G1 X59.794 Y57.548 E0.01164 ; perimeter
G1 X59.544 Y57.661 E0.01133 ; perimeter
G1 X59.337 Y57.805 E0.01039 ; perimeter
G1 X58.271 Y56.911 E0.05731 ; perimeter
G1 X58.513 Y56.688 E0.01357 ; perimeter
G1 X58.765 Y56.501 E0.01291 ; perimeter
G1 X59.044 Y56.337 E0.01333 ; perimeter
G1 X59.413 Y56.175 E0.01661 ; perimeter
G1 X59.799 Y56.063 E0.01656 ; perimeter
G1 X60.197 Y56.003 E0.01656 ; perimeter
G1 X60.714 Y56.007 E0.02131 ; perimeter
G1 X60.998 Y56.038 E0.01177 ; perimeter
G1 X61.388 Y56.134 E0.01656 ; perimeter
G1 X61.763 Y56.280 E0.01656 ; perimeter
G1 X62.115 Y56.473 E0.01656 ; perimeter
G1 X62.445 Y56.715 E0.01686 ; perimeter
G1 X82.078 Y73.189 E1.05580 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X90.677 Y76.094 E0.18617 ; perimeter
G1 X89.862 Y77.065 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.543 Y76.826 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.309 Y74.987 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.350 F10800.000 ; lift Z
G1 X165.892 Y102.228 ; move to first perimeter point
G1 Z22.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.764 Y102.100 E0.00745 ; perimeter
G1 X165.764 Y101.948 E0.00625 ; perimeter
G1 X170.041 Y101.948 E0.17618 ; perimeter
G1 X170.041 Y102.100 E0.00625 ; perimeter
G1 X169.913 Y102.228 E0.00745 ; perimeter
G1 X165.952 Y102.228 E0.16317 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.728 Y102.624 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.368 Y102.264 E0.02098 ; perimeter
G1 X165.368 Y101.552 E0.02934 ; perimeter
G1 X170.437 Y101.552 E0.20883 ; perimeter
G1 X170.437 Y102.264 E0.02934 ; perimeter
G1 X170.077 Y102.624 E0.02098 ; perimeter
G1 X165.788 Y102.624 E0.17670 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.564 Y103.020 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.972 Y102.428 E0.03450 ; perimeter
G1 X164.972 Y101.155 E0.05243 ; perimeter
G1 X170.834 Y101.155 E0.24149 ; perimeter
G1 X170.834 Y102.428 E0.05243 ; perimeter
G1 X170.241 Y103.020 E0.03450 ; perimeter
G1 X165.624 Y103.020 E0.19023 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.549 Y102.621 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.972 Y102.428 E-0.20341 ; wipe and retract
G1 X164.972 Y101.155 E-0.29389 ; wipe and retract
G1 X166.109 Y101.155 E-0.26270 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.350 F10800.000 ; lift Z
G1 X175.970 Y97.494 ; move to first perimeter point
G1 Z22.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X175.626 Y97.084 E0.02205 ; perimeter
G1 X202.336 Y74.672 E1.43638 ; perimeter
G1 X202.612 Y74.395 E0.01613 ; perimeter
G1 X202.852 Y74.052 E0.01725 ; perimeter
G1 X203.029 Y73.673 E0.01725 ; perimeter
G1 X203.138 Y73.268 E0.01725 ; perimeter
G1 X203.174 Y72.851 E0.01725 ; perimeter
G1 X203.138 Y72.434 E0.01725 ; perimeter
G1 X203.029 Y72.030 E0.01725 ; perimeter
G1 X202.852 Y71.650 E0.01725 ; perimeter
G1 X202.628 Y71.330 E0.01612 ; perimeter
G1 X202.043 Y70.632 E0.03752 ; perimeter
G1 X202.453 Y70.288 E0.02205 ; perimeter
G1 X203.170 Y71.143 E0.04597 ; perimeter
G1 X203.402 Y71.463 E0.01629 ; perimeter
G1 X203.574 Y71.786 E0.01510 ; perimeter
G1 X203.731 Y72.249 E0.02013 ; perimeter
G1 X203.782 Y72.505 E0.01074 ; perimeter
G1 X203.808 Y72.874 E0.01525 ; perimeter
G1 X203.765 Y73.358 E0.02002 ; perimeter
G1 X203.676 Y73.715 E0.01517 ; perimeter
G1 X203.535 Y74.064 E0.01549 ; perimeter
G1 X203.414 Y74.277 E0.01012 ; perimeter
G1 X203.114 Y74.683 E0.02078 ; perimeter
G1 X202.837 Y74.950 E0.01585 ; perimeter
G1 X176.016 Y97.455 E1.44236 ; perimeter
M204 S1000 ; adjust acceleration
G1 X175.921 Y98.052 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X175.067 Y97.035 E0.05471 ; perimeter
G1 X202.068 Y74.379 E1.45199 ; perimeter
G1 X202.308 Y74.139 E0.01398 ; perimeter
G1 X202.508 Y73.853 E0.01439 ; perimeter
G1 X202.656 Y73.537 E0.01439 ; perimeter
G1 X202.746 Y73.199 E0.01439 ; perimeter
G1 X202.776 Y72.851 E0.01439 ; perimeter
G1 X202.746 Y72.503 E0.01439 ; perimeter
G1 X202.656 Y72.166 E0.01439 ; perimeter
G1 X202.508 Y71.849 E0.01439 ; perimeter
G1 X202.313 Y71.571 E0.01398 ; perimeter
G1 X201.484 Y70.583 E0.05314 ; perimeter
G1 X202.501 Y69.730 E0.05471 ; perimeter
G1 X203.482 Y70.899 E0.06287 ; perimeter
G1 X203.739 Y71.252 E0.01800 ; perimeter
G1 X203.939 Y71.629 E0.01757 ; perimeter
G1 X204.114 Y72.146 E0.02250 ; perimeter
G1 X204.176 Y72.452 E0.01283 ; perimeter
G1 X204.206 Y72.877 E0.01759 ; perimeter
G1 X204.157 Y73.424 E0.02259 ; perimeter
G1 X204.054 Y73.838 E0.01760 ; perimeter
G1 X203.892 Y74.236 E0.01770 ; perimeter
G1 X203.747 Y74.494 E0.01218 ; perimeter
G1 X203.413 Y74.945 E0.02313 ; perimeter
G1 X203.102 Y75.245 E0.01777 ; perimeter
G1 X175.967 Y98.014 E1.45926 ; perimeter
M204 S1000 ; adjust acceleration
G1 X175.852 Y97.658 F10800.000 ; move inwards before travel
G1 F8640
G1 X175.067 Y97.035 E-0.30695 ; wipe and retract
G1 X176.571 Y95.774 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.350 F10800.000 ; lift Z
G1 X160.226 Y76.553 ; move to first perimeter point
G1 Z22.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.882 Y76.143 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.16390 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X187.800 Y57.027 E1.06121 ; perimeter
G1 X188.098 Y56.808 E0.01526 ; perimeter
G1 X188.405 Y56.640 E0.01442 ; perimeter
G1 X188.731 Y56.513 E0.01442 ; perimeter
G1 X189.071 Y56.429 E0.01442 ; perimeter
G1 X189.419 Y56.391 E0.01442 ; perimeter
G1 X189.769 Y56.398 E0.01440 ; perimeter
G1 X190.115 Y56.451 E0.01443 ; perimeter
G1 X190.451 Y56.549 E0.01442 ; perimeter
G1 X190.775 Y56.691 E0.01457 ; perimeter
G1 X191.118 Y56.906 E0.01669 ; perimeter
G1 X190.639 Y57.308 E0.02578 ; perimeter
G1 X190.344 Y57.175 E0.01334 ; perimeter
G1 X190.011 Y57.077 E0.01430 ; perimeter
G1 X189.473 Y57.024 E0.02227 ; perimeter
G1 X189.118 Y57.056 E0.01469 ; perimeter
G1 X188.761 Y57.143 E0.01512 ; perimeter
G1 X188.263 Y57.371 E0.02255 ; perimeter
G1 X187.983 Y57.573 E0.01424 ; perimeter
G1 X168.261 Y74.121 E1.06057 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X160.272 Y76.514 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.177 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.323 Y76.094 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.18617 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X187.555 Y56.715 E1.05580 ; perimeter
G1 X187.885 Y56.473 E0.01686 ; perimeter
G1 X188.237 Y56.280 E0.01656 ; perimeter
G1 X188.612 Y56.134 E0.01656 ; perimeter
G1 X189.002 Y56.038 E0.01656 ; perimeter
G1 X189.402 Y55.994 E0.01656 ; perimeter
G1 X189.803 Y56.003 E0.01655 ; perimeter
G1 X190.201 Y56.063 E0.01656 ; perimeter
G1 X190.587 Y56.175 E0.01656 ; perimeter
G1 X190.956 Y56.337 E0.01661 ; perimeter
G1 X191.236 Y56.502 E0.01337 ; perimeter
G1 X191.436 Y56.647 E0.01017 ; perimeter
G1 X191.729 Y56.911 E0.01627 ; perimeter
G1 X190.663 Y57.805 E0.05731 ; perimeter
G1 X190.456 Y57.661 E0.01039 ; perimeter
G1 X190.206 Y57.548 E0.01133 ; perimeter
G1 X189.935 Y57.468 E0.01164 ; perimeter
G1 X189.471 Y57.422 E0.01918 ; perimeter
G1 X189.183 Y57.448 E0.01193 ; perimeter
G1 X188.891 Y57.519 E0.01235 ; perimeter
G1 X188.463 Y57.715 E0.01939 ; perimeter
G1 X188.226 Y57.886 E0.01204 ; perimeter
G1 X168.405 Y74.517 E1.06590 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X160.223 Y77.073 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.159 Y76.712 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.323 Y76.094 E-0.30695 ; wipe and retract
G1 X160.826 Y74.833 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.350 F10800.000 ; lift Z
G1 X83.823 Y140.374 ; move to first perimeter point
G1 Z22.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.802 Y140.374 E0.16564 ; perimeter
G1 X79.674 Y140.246 E0.00745 ; perimeter
G1 X79.674 Y140.094 E0.00625 ; perimeter
G1 X83.951 Y140.094 E0.17618 ; perimeter
G1 X83.951 Y140.246 E0.00625 ; perimeter
G1 X83.865 Y140.331 E0.00498 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.987 Y140.770 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.638 Y140.770 E0.17917 ; perimeter
G1 X79.278 Y140.410 E0.02097 ; perimeter
G1 X79.278 Y139.698 E0.02934 ; perimeter
G1 X84.347 Y139.698 E0.20883 ; perimeter
G1 X84.347 Y140.410 E0.02934 ; perimeter
G1 X84.029 Y140.728 E0.01850 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.151 Y141.166 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.473 Y141.166 E0.19270 ; perimeter
G1 X78.881 Y140.574 E0.03450 ; perimeter
G1 X78.881 Y139.301 E0.05243 ; perimeter
G1 X84.743 Y139.301 E0.24149 ; perimeter
G1 X84.743 Y140.574 E0.05243 ; perimeter
G1 X84.194 Y141.124 E0.03203 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.827 Y140.932 F10800.000 ; move inwards before travel
G1 F8640
G1 X80.902 Y141.154 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.350 F10800.000 ; lift Z
G1 X73.745 Y135.640 ; move to first perimeter point
G1 Z22.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X46.878 Y113.096 E1.44483 ; perimeter
G1 X46.595 Y112.823 E0.01619 ; perimeter
G1 X46.366 Y112.530 E0.01533 ; perimeter
G1 X46.182 Y112.213 E0.01508 ; perimeter
G1 X46.008 Y111.755 E0.02019 ; perimeter
G1 X45.932 Y111.396 E0.01510 ; perimeter
G1 X45.906 Y111.026 E0.01532 ; perimeter
G1 X45.933 Y110.651 E0.01548 ; perimeter
G1 X45.984 Y110.395 E0.01074 ; perimeter
G1 X46.141 Y109.932 E0.02013 ; perimeter
G1 X46.313 Y109.609 E0.01510 ; perimeter
G1 X46.545 Y109.289 E0.01629 ; perimeter
G1 X47.262 Y108.434 E0.04597 ; perimeter
G1 X47.672 Y108.778 E0.02205 ; perimeter
G1 X47.087 Y109.476 E0.03752 ; perimeter
G1 X46.862 Y109.796 E0.01612 ; perimeter
G1 X46.685 Y110.176 E0.01725 ; perimeter
G1 X46.577 Y110.580 E0.01725 ; perimeter
G1 X46.541 Y110.997 E0.01725 ; perimeter
G1 X46.577 Y111.414 E0.01725 ; perimeter
G1 X46.685 Y111.819 E0.01725 ; perimeter
G1 X46.862 Y112.198 E0.01725 ; perimeter
G1 X47.102 Y112.541 E0.01725 ; perimeter
G1 X47.379 Y112.818 E0.01612 ; perimeter
G1 X74.089 Y135.230 E1.43638 ; perimeter
G1 X73.783 Y135.594 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X73.794 Y136.198 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.613 Y113.391 E1.46173 ; perimeter
G1 X46.300 Y113.089 E0.01790 ; perimeter
G1 X46.036 Y112.752 E0.01761 ; perimeter
G1 X45.823 Y112.384 E0.01754 ; perimeter
G1 X45.627 Y111.867 E0.02277 ; perimeter
G1 X45.539 Y111.452 E0.01749 ; perimeter
G1 X45.509 Y111.026 E0.01760 ; perimeter
G1 X45.539 Y110.598 E0.01767 ; perimeter
G1 X45.600 Y110.292 E0.01283 ; perimeter
G1 X45.775 Y109.775 E0.02250 ; perimeter
G1 X45.976 Y109.398 E0.01757 ; perimeter
G1 X46.232 Y109.045 E0.01800 ; perimeter
G1 X47.213 Y107.876 E0.06287 ; perimeter
G1 X48.231 Y108.729 E0.05471 ; perimeter
G1 X47.402 Y109.717 E0.05314 ; perimeter
G1 X47.207 Y109.995 E0.01398 ; perimeter
G1 X47.059 Y110.312 E0.01439 ; perimeter
G1 X46.969 Y110.649 E0.01439 ; perimeter
G1 X46.938 Y110.997 E0.01439 ; perimeter
G1 X46.969 Y111.345 E0.01439 ; perimeter
G1 X47.059 Y111.683 E0.01439 ; perimeter
G1 X47.207 Y111.999 E0.01439 ; perimeter
G1 X47.407 Y112.285 E0.01439 ; perimeter
G1 X47.647 Y112.525 E0.01398 ; perimeter
G1 X74.647 Y135.181 E1.45199 ; perimeter
G1 X73.832 Y136.153 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X73.491 Y135.938 F10800.000 ; move inwards before travel
G1 F8640
G1 X71.307 Y134.041 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.350 F10800.000 ; lift Z
G1 X89.489 Y114.699 ; move to first perimeter point
G1 Z22.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.15587 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X61.732 Y95.719 E1.06057 ; perimeter
G1 X61.451 Y95.517 E0.01424 ; perimeter
G1 X60.954 Y95.289 E0.02255 ; perimeter
G1 X60.597 Y95.202 E0.01512 ; perimeter
G1 X60.242 Y95.170 E0.01469 ; perimeter
G1 X59.704 Y95.224 E0.02227 ; perimeter
G1 X59.371 Y95.321 E0.01430 ; perimeter
G1 X59.076 Y95.454 E0.01334 ; perimeter
G1 X58.598 Y95.053 E0.02571 ; perimeter
G1 X58.940 Y94.837 E0.01666 ; perimeter
G1 X59.263 Y94.695 E0.01457 ; perimeter
G1 X59.600 Y94.597 E0.01442 ; perimeter
G1 X59.946 Y94.544 E0.01442 ; perimeter
G1 X60.385 Y94.547 E0.01811 ; perimeter
G1 X60.643 Y94.575 E0.01070 ; perimeter
G1 X60.983 Y94.659 E0.01442 ; perimeter
G1 X61.310 Y94.786 E0.01442 ; perimeter
G1 X61.616 Y94.954 E0.01442 ; perimeter
G1 X61.915 Y95.173 E0.01526 ; perimeter
G1 X81.649 Y111.732 E1.06121 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X89.833 Y114.289 E0.16390 ; perimeter
G1 X89.528 Y114.653 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.538 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.16626 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X61.489 Y96.032 E1.06590 ; perimeter
G1 X61.251 Y95.861 E0.01204 ; perimeter
G1 X60.823 Y95.665 E0.01939 ; perimeter
G1 X60.532 Y95.594 E0.01235 ; perimeter
G1 X60.244 Y95.568 E0.01193 ; perimeter
G1 X59.780 Y95.614 E0.01918 ; perimeter
G1 X59.509 Y95.694 E0.01164 ; perimeter
G1 X59.258 Y95.807 E0.01133 ; perimeter
G1 X59.052 Y95.951 E0.01039 ; perimeter
G1 X57.986 Y95.057 E0.05731 ; perimeter
G1 X58.228 Y94.834 E0.01357 ; perimeter
G1 X58.480 Y94.647 E0.01291 ; perimeter
G1 X58.759 Y94.483 E0.01333 ; perimeter
G1 X59.128 Y94.321 E0.01661 ; perimeter
G1 X59.514 Y94.209 E0.01656 ; perimeter
G1 X59.911 Y94.149 E0.01656 ; perimeter
G1 X60.429 Y94.153 E0.02131 ; perimeter
G1 X60.713 Y94.184 E0.01177 ; perimeter
G1 X61.103 Y94.280 E0.01656 ; perimeter
G1 X61.478 Y94.426 E0.01656 ; perimeter
G1 X61.830 Y94.619 E0.01656 ; perimeter
G1 X62.160 Y94.861 E0.01686 ; perimeter
G1 X81.793 Y111.335 E1.05580 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X90.392 Y114.240 E0.18617 ; perimeter
G1 X89.577 Y115.212 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.257 Y114.972 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.024 Y113.134 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.350 F10800.000 ; lift Z
G1 X165.607 Y140.374 ; move to first perimeter point
G1 Z22.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.479 Y140.246 E0.00745 ; perimeter
G1 X165.479 Y140.094 E0.00625 ; perimeter
G1 X169.756 Y140.094 E0.17618 ; perimeter
G1 X169.756 Y140.246 E0.00625 ; perimeter
G1 X169.628 Y140.374 E0.00745 ; perimeter
G1 X165.667 Y140.374 E0.16317 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.443 Y140.770 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.083 Y140.410 E0.02098 ; perimeter
G1 X165.083 Y139.698 E0.02934 ; perimeter
G1 X170.152 Y139.698 E0.20883 ; perimeter
G1 X170.152 Y140.410 E0.02934 ; perimeter
G1 X169.792 Y140.770 E0.02098 ; perimeter
G1 X165.503 Y140.770 E0.17670 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.279 Y141.166 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.686 Y140.574 E0.03450 ; perimeter
G1 X164.686 Y139.301 E0.05243 ; perimeter
G1 X170.548 Y139.301 E0.24149 ; perimeter
G1 X170.548 Y140.574 E0.05243 ; perimeter
G1 X169.956 Y141.166 E0.03450 ; perimeter
G1 X165.339 Y141.166 E0.19023 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.264 Y140.767 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.686 Y140.574 E-0.20341 ; wipe and retract
G1 X164.686 Y139.301 E-0.29389 ; wipe and retract
G1 X165.824 Y139.301 E-0.26270 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.350 F10800.000 ; lift Z
G1 X175.685 Y135.640 ; move to first perimeter point
G1 Z22.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X175.341 Y135.230 E0.02205 ; perimeter
G1 X202.050 Y112.818 E1.43638 ; perimeter
G1 X202.327 Y112.541 E0.01613 ; perimeter
G1 X202.567 Y112.198 E0.01725 ; perimeter
G1 X202.744 Y111.819 E0.01725 ; perimeter
G1 X202.853 Y111.414 E0.01725 ; perimeter
G1 X202.889 Y110.997 E0.01725 ; perimeter
G1 X202.853 Y110.580 E0.01725 ; perimeter
G1 X202.744 Y110.176 E0.01725 ; perimeter
G1 X202.567 Y109.796 E0.01725 ; perimeter
G1 X202.343 Y109.476 E0.01612 ; perimeter
G1 X201.757 Y108.778 E0.03752 ; perimeter
G1 X202.167 Y108.434 E0.02205 ; perimeter
G1 X202.885 Y109.289 E0.04597 ; perimeter
G1 X203.117 Y109.609 E0.01629 ; perimeter
G1 X203.289 Y109.932 E0.01510 ; perimeter
G1 X203.446 Y110.395 E0.02013 ; perimeter
G1 X203.497 Y110.651 E0.01074 ; perimeter
G1 X203.523 Y111.020 E0.01525 ; perimeter
G1 X203.480 Y111.504 E0.02002 ; perimeter
G1 X203.391 Y111.861 E0.01517 ; perimeter
G1 X203.250 Y112.210 E0.01549 ; perimeter
G1 X203.129 Y112.423 E0.01012 ; perimeter
G1 X202.829 Y112.829 E0.02078 ; perimeter
G1 X202.552 Y113.096 E0.01585 ; perimeter
G1 X175.731 Y135.602 E1.44236 ; perimeter
M204 S1000 ; adjust acceleration
G1 X175.636 Y136.198 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X174.782 Y135.181 E0.05471 ; perimeter
G1 X201.782 Y112.525 E1.45199 ; perimeter
G1 X202.022 Y112.285 E0.01398 ; perimeter
G1 X202.223 Y111.999 E0.01439 ; perimeter
G1 X202.370 Y111.683 E0.01439 ; perimeter
G1 X202.461 Y111.345 E0.01439 ; perimeter
G1 X202.491 Y110.997 E0.01439 ; perimeter
G1 X202.461 Y110.649 E0.01439 ; perimeter
G1 X202.370 Y110.312 E0.01439 ; perimeter
G1 X202.223 Y109.995 E0.01439 ; perimeter
G1 X202.028 Y109.717 E0.01398 ; perimeter
G1 X201.199 Y108.729 E0.05314 ; perimeter
G1 X202.216 Y107.876 E0.05471 ; perimeter
G1 X203.197 Y109.045 E0.06287 ; perimeter
G1 X203.454 Y109.398 E0.01800 ; perimeter
G1 X203.654 Y109.775 E0.01757 ; perimeter
G1 X203.829 Y110.292 E0.02250 ; perimeter
G1 X203.891 Y110.598 E0.01283 ; perimeter
G1 X203.920 Y111.024 E0.01759 ; perimeter
G1 X203.872 Y111.570 E0.02259 ; perimeter
G1 X203.769 Y111.984 E0.01760 ; perimeter
G1 X203.607 Y112.383 E0.01770 ; perimeter
G1 X203.461 Y112.640 E0.01218 ; perimeter
G1 X203.128 Y113.091 E0.02313 ; perimeter
G1 X202.817 Y113.391 E0.01777 ; perimeter
G1 X175.682 Y136.160 E1.45926 ; perimeter
M204 S1000 ; adjust acceleration
G1 X175.566 Y135.805 F10800.000 ; move inwards before travel
G1 F8640
G1 X174.782 Y135.181 E-0.30695 ; wipe and retract
G1 X176.285 Y133.920 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.350 F10800.000 ; lift Z
G1 X159.940 Y114.699 ; move to first perimeter point
G1 Z22.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.596 Y114.289 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.16390 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X187.515 Y95.173 E1.06121 ; perimeter
G1 X187.813 Y94.954 E0.01526 ; perimeter
G1 X188.120 Y94.786 E0.01442 ; perimeter
G1 X188.446 Y94.659 E0.01442 ; perimeter
G1 X188.786 Y94.575 E0.01442 ; perimeter
G1 X189.134 Y94.537 E0.01442 ; perimeter
G1 X189.484 Y94.544 E0.01440 ; perimeter
G1 X189.830 Y94.597 E0.01443 ; perimeter
G1 X190.166 Y94.695 E0.01442 ; perimeter
G1 X190.490 Y94.837 E0.01457 ; perimeter
G1 X190.833 Y95.052 E0.01669 ; perimeter
G1 X190.354 Y95.454 E0.02578 ; perimeter
G1 X190.059 Y95.321 E0.01334 ; perimeter
G1 X189.726 Y95.224 E0.01430 ; perimeter
G1 X189.188 Y95.170 E0.02227 ; perimeter
G1 X188.833 Y95.202 E0.01469 ; perimeter
G1 X188.476 Y95.289 E0.01512 ; perimeter
G1 X187.978 Y95.517 E0.02255 ; perimeter
G1 X187.697 Y95.719 E0.01424 ; perimeter
G1 X167.976 Y112.267 E1.06057 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.986 Y114.661 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.892 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.038 Y114.240 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.18617 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X187.270 Y94.861 E1.05580 ; perimeter
G1 X187.600 Y94.619 E0.01686 ; perimeter
G1 X187.952 Y94.426 E0.01656 ; perimeter
G1 X188.327 Y94.280 E0.01656 ; perimeter
G1 X188.717 Y94.184 E0.01656 ; perimeter
G1 X189.117 Y94.140 E0.01656 ; perimeter
G1 X189.518 Y94.149 E0.01655 ; perimeter
G1 X189.916 Y94.209 E0.01656 ; perimeter
G1 X190.302 Y94.321 E0.01656 ; perimeter
G1 X190.671 Y94.483 E0.01661 ; perimeter
G1 X190.951 Y94.648 E0.01337 ; perimeter
G1 X191.150 Y94.793 E0.01017 ; perimeter
G1 X191.444 Y95.057 E0.01627 ; perimeter
G1 X190.378 Y95.951 E0.05731 ; perimeter
G1 X190.171 Y95.807 E0.01039 ; perimeter
G1 X189.921 Y95.694 E0.01133 ; perimeter
G1 X189.649 Y95.614 E0.01164 ; perimeter
G1 X189.186 Y95.568 E0.01918 ; perimeter
G1 X188.898 Y95.594 E0.01193 ; perimeter
G1 X188.606 Y95.665 E0.01235 ; perimeter
G1 X188.178 Y95.861 E0.01939 ; perimeter
G1 X187.941 Y96.032 E0.01204 ; perimeter
G1 X168.120 Y112.663 E1.06590 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X159.938 Y115.219 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.874 Y114.858 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;23


G1 F8640
G1 X159.038 Y114.240 E-0.30695 ; wipe and retract
G1 X160.541 Y112.979 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;23
G1 X84.382 Y102.374 ; move to first perimeter point
G1 Z23.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.813 Y102.374 E0.18824 ; perimeter
G1 X79.813 Y101.696 E0.02793 ; perimeter
G1 X84.382 Y101.696 E0.18824 ; perimeter
G1 X84.382 Y102.314 E0.02546 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.686 Y102.770 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.509 Y102.770 E0.21329 ; perimeter
G1 X79.416 Y102.678 E0.00537 ; perimeter
G1 X79.416 Y101.300 E0.05679 ; perimeter
G1 X84.778 Y101.300 E0.22089 ; perimeter
G1 X84.778 Y102.678 E0.05679 ; perimeter
G1 X84.729 Y102.728 E0.00290 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.344 Y102.563 F10800.000 ; move inwards before travel
G1 F8640
G1 X81.437 Y102.755 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.600 F10800.000 ; lift Z
G1 X73.839 Y97.333 ; move to first perimeter point
G1 Z23.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.163 Y74.950 E1.43453 ; perimeter
G1 X46.879 Y74.675 E0.01629 ; perimeter
G1 X46.649 Y74.380 E0.01542 ; perimeter
G1 X46.461 Y74.056 E0.01544 ; perimeter
G1 X46.321 Y73.708 E0.01545 ; perimeter
G1 X46.233 Y73.347 E0.01528 ; perimeter
G1 X46.192 Y72.884 E0.01916 ; perimeter
G1 X46.216 Y72.515 E0.01524 ; perimeter
G1 X46.293 Y72.148 E0.01544 ; perimeter
G1 X46.421 Y71.796 E0.01545 ; perimeter
G1 X46.597 Y71.464 E0.01546 ; perimeter
G1 X46.830 Y71.143 E0.01636 ; perimeter
G1 X47.387 Y70.479 E0.03567 ; perimeter
G1 X47.797 Y70.824 E0.02205 ; perimeter
G1 X47.372 Y71.330 E0.02722 ; perimeter
G1 X47.148 Y71.650 E0.01612 ; perimeter
G1 X46.971 Y72.030 E0.01725 ; perimeter
G1 X46.862 Y72.434 E0.01725 ; perimeter
G1 X46.825 Y72.862 E0.01768 ; perimeter
G1 X46.884 Y73.350 E0.02026 ; perimeter
G1 X46.971 Y73.673 E0.01376 ; perimeter
G1 X47.148 Y74.052 E0.01725 ; perimeter
G1 X47.388 Y74.395 E0.01725 ; perimeter
G1 X47.664 Y74.672 E0.01612 ; perimeter
G1 X74.183 Y96.923 E1.42608 ; perimeter
G1 X73.877 Y97.287 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X73.887 Y97.892 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.898 Y75.245 E1.45143 ; perimeter
G1 X46.583 Y74.941 E0.01800 ; perimeter
G1 X46.319 Y74.602 E0.01771 ; perimeter
G1 X46.104 Y74.229 E0.01773 ; perimeter
G1 X45.943 Y73.830 E0.01775 ; perimeter
G1 X45.840 Y73.413 E0.01770 ; perimeter
G1 X45.794 Y72.888 E0.02169 ; perimeter
G1 X45.823 Y72.461 E0.01765 ; perimeter
G1 X45.911 Y72.040 E0.01773 ; perimeter
G1 X46.058 Y71.635 E0.01774 ; perimeter
G1 X46.260 Y71.254 E0.01775 ; perimeter
G1 X46.518 Y70.899 E0.01808 ; perimeter
G1 X47.338 Y69.921 E0.05257 ; perimeter
G1 X48.355 Y70.775 E0.05471 ; perimeter
G1 X47.687 Y71.571 E0.04284 ; perimeter
G1 X47.492 Y71.849 E0.01398 ; perimeter
G1 X47.344 Y72.166 E0.01439 ; perimeter
G1 X47.254 Y72.503 E0.01439 ; perimeter
G1 X47.223 Y72.855 E0.01455 ; perimeter
G1 X47.274 Y73.274 E0.01740 ; perimeter
G1 X47.344 Y73.537 E0.01118 ; perimeter
G1 X47.492 Y73.853 E0.01439 ; perimeter
G1 X47.692 Y74.139 E0.01439 ; perimeter
G1 X47.932 Y74.379 E0.01398 ; perimeter
G1 X74.741 Y96.874 E1.44169 ; perimeter
G1 X73.926 Y97.846 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X73.584 Y97.631 F10800.000 ; move inwards before travel
G1 F8640
G1 X71.401 Y95.734 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.600 F10800.000 ; lift Z
G1 X89.774 Y76.553 ; move to first perimeter point
G1 Z23.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.15587 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X62.018 Y57.573 E1.06055 ; perimeter
G1 X61.753 Y57.382 E0.01344 ; perimeter
G1 X61.452 Y57.226 E0.01397 ; perimeter
G1 X61.211 Y57.136 E0.01059 ; perimeter
G1 X60.880 Y57.056 E0.01405 ; perimeter
G1 X60.546 Y57.025 E0.01380 ; perimeter
G1 X60.220 Y57.041 E0.01346 ; perimeter
G1 X59.914 Y57.098 E0.01281 ; perimeter
G1 X59.613 Y57.194 E0.01300 ; perimeter
G1 X59.101 Y56.763 E0.02757 ; perimeter
G1 X59.549 Y56.549 E0.02047 ; perimeter
G1 X59.885 Y56.451 E0.01442 ; perimeter
G1 X60.223 Y56.399 E0.01409 ; perimeter
G1 X60.677 Y56.402 E0.01870 ; perimeter
G1 X60.929 Y56.429 E0.01043 ; perimeter
G1 X61.269 Y56.513 E0.01442 ; perimeter
G1 X61.595 Y56.640 E0.01442 ; perimeter
G1 X61.902 Y56.808 E0.01442 ; perimeter
G1 X62.200 Y57.027 E0.01526 ; perimeter
G1 X81.934 Y73.586 E1.06121 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.118 Y76.143 E0.16390 ; perimeter
G1 X89.813 Y76.507 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.823 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.16626 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X61.774 Y57.886 E1.06589 ; perimeter
G1 X61.545 Y57.721 E0.01164 ; perimeter
G1 X61.290 Y57.589 E0.01181 ; perimeter
G1 X61.095 Y57.515 E0.00861 ; perimeter
G1 X60.815 Y57.448 E0.01185 ; perimeter
G1 X60.538 Y57.423 E0.01148 ; perimeter
G1 X60.266 Y57.436 E0.01122 ; perimeter
G1 X60.008 Y57.483 E0.01081 ; perimeter
G1 X59.787 Y57.550 E0.00950 ; perimeter
G1 X59.560 Y57.666 E0.01050 ; perimeter
G1 X58.457 Y56.740 E0.05935 ; perimeter
G1 X58.770 Y56.498 E0.01633 ; perimeter
G1 X59.044 Y56.337 E0.01309 ; perimeter
G1 X59.414 Y56.175 E0.01661 ; perimeter
G1 X59.800 Y56.063 E0.01655 ; perimeter
G1 X60.194 Y56.003 E0.01644 ; perimeter
G1 X60.700 Y56.005 E0.02084 ; perimeter
G1 X60.998 Y56.038 E0.01236 ; perimeter
G1 X61.388 Y56.134 E0.01656 ; perimeter
G1 X61.763 Y56.280 E0.01656 ; perimeter
G1 X62.115 Y56.473 E0.01656 ; perimeter
G1 X62.445 Y56.715 E0.01686 ; perimeter
G1 X82.078 Y73.189 E1.05580 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X90.677 Y76.094 E0.18617 ; perimeter
G1 X89.862 Y77.065 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.543 Y76.826 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.309 Y74.987 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.600 F10800.000 ; lift Z
G1 X165.618 Y102.374 ; move to first perimeter point
G1 Z23.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.618 Y101.696 E0.02793 ; perimeter
G1 X170.187 Y101.696 E0.18824 ; perimeter
G1 X170.187 Y102.374 E0.02793 ; perimeter
G1 X165.678 Y102.374 E0.18576 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.314 Y102.770 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.222 Y102.678 E0.00537 ; perimeter
G1 X165.222 Y101.300 E0.05679 ; perimeter
G1 X170.584 Y101.300 E0.22089 ; perimeter
G1 X170.584 Y102.678 E0.05679 ; perimeter
G1 X170.491 Y102.770 E0.00537 ; perimeter
G1 X165.374 Y102.770 E0.21082 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.313 Y102.640 F10800.000 ; move inwards before travel
G1 F8640
G1 X165.222 Y102.678 E-0.04109 ; wipe and retract
G1 X165.222 Y101.300 E-0.31828 ; wipe and retract
G1 X166.957 Y101.300 E-0.40063 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.600 F10800.000 ; lift Z
G1 X176.161 Y97.333 ; move to first perimeter point
G1 Z23.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X175.817 Y96.923 E0.02205 ; perimeter
G1 X202.336 Y74.672 E1.42608 ; perimeter
G1 X202.612 Y74.395 E0.01613 ; perimeter
G1 X202.852 Y74.052 E0.01725 ; perimeter
G1 X203.029 Y73.673 E0.01725 ; perimeter
G1 X203.138 Y73.268 E0.01725 ; perimeter
G1 X203.174 Y72.851 E0.01725 ; perimeter
G1 X203.138 Y72.434 E0.01725 ; perimeter
G1 X203.029 Y72.030 E0.01725 ; perimeter
G1 X202.852 Y71.650 E0.01725 ; perimeter
G1 X202.628 Y71.330 E0.01612 ; perimeter
G1 X202.203 Y70.824 E0.02722 ; perimeter
G1 X202.613 Y70.479 E0.02205 ; perimeter
G1 X203.170 Y71.143 E0.03567 ; perimeter
G1 X203.403 Y71.464 E0.01636 ; perimeter
G1 X203.576 Y71.790 E0.01522 ; perimeter
G1 X203.727 Y72.233 E0.01925 ; perimeter
G1 X203.783 Y72.512 E0.01174 ; perimeter
G1 X203.808 Y72.884 E0.01535 ; perimeter
G1 X203.767 Y73.347 E0.01916 ; perimeter
G1 X203.679 Y73.708 E0.01528 ; perimeter
G1 X203.538 Y74.058 E0.01554 ; perimeter
G1 X203.403 Y74.295 E0.01125 ; perimeter
G1 X203.116 Y74.680 E0.01977 ; perimeter
G1 X202.837 Y74.950 E0.01600 ; perimeter
G1 X176.207 Y97.295 E1.43206 ; perimeter
M204 S1000 ; adjust acceleration
G1 X176.113 Y97.892 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X175.259 Y96.874 E0.05471 ; perimeter
G1 X202.068 Y74.379 E1.44169 ; perimeter
G1 X202.308 Y74.139 E0.01398 ; perimeter
G1 X202.508 Y73.853 E0.01439 ; perimeter
G1 X202.656 Y73.537 E0.01439 ; perimeter
G1 X202.746 Y73.199 E0.01439 ; perimeter
G1 X202.776 Y72.851 E0.01439 ; perimeter
G1 X202.746 Y72.503 E0.01439 ; perimeter
G1 X202.656 Y72.166 E0.01439 ; perimeter
G1 X202.508 Y71.849 E0.01439 ; perimeter
G1 X202.313 Y71.571 E0.01398 ; perimeter
G1 X201.645 Y70.775 E0.04284 ; perimeter
G1 X202.662 Y69.921 E0.05471 ; perimeter
G1 X203.482 Y70.899 E0.05257 ; perimeter
G1 X203.740 Y71.254 E0.01808 ; perimeter
G1 X203.941 Y71.633 E0.01767 ; perimeter
G1 X204.111 Y72.129 E0.02162 ; perimeter
G1 X204.177 Y72.460 E0.01389 ; perimeter
G1 X204.206 Y72.888 E0.01769 ; perimeter
G1 X204.160 Y73.413 E0.02169 ; perimeter
G1 X204.057 Y73.830 E0.01770 ; perimeter
G1 X203.896 Y74.230 E0.01778 ; perimeter
G1 X203.736 Y74.512 E0.01336 ; perimeter
G1 X203.415 Y74.943 E0.02212 ; perimeter
G1 X203.102 Y75.245 E0.01790 ; perimeter
G1 X176.159 Y97.853 E1.44896 ; perimeter
M204 S1000 ; adjust acceleration
G1 X176.043 Y97.498 F10800.000 ; move inwards before travel
G1 F8640
G1 X175.259 Y96.874 E-0.30695 ; wipe and retract
G1 X176.762 Y95.613 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.600 F10800.000 ; lift Z
G1 X160.226 Y76.553 ; move to first perimeter point
G1 Z23.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.882 Y76.143 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.16390 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X187.800 Y57.027 E1.06121 ; perimeter
G1 X188.098 Y56.808 E0.01526 ; perimeter
G1 X188.312 Y56.691 E0.01002 ; perimeter
G1 X188.740 Y56.511 E0.01914 ; perimeter
G1 X189.071 Y56.429 E0.01406 ; perimeter
G1 X189.419 Y56.391 E0.01442 ; perimeter
G1 X189.675 Y56.396 E0.01054 ; perimeter
G1 X190.122 Y56.453 E0.01858 ; perimeter
G1 X190.451 Y56.549 E0.01410 ; perimeter
G1 X190.899 Y56.763 E0.02048 ; perimeter
G1 X190.387 Y57.194 E0.02757 ; perimeter
G1 X190.086 Y57.098 E0.01300 ; perimeter
G1 X189.780 Y57.041 E0.01281 ; perimeter
G1 X189.454 Y57.025 E0.01346 ; perimeter
G1 X189.120 Y57.056 E0.01380 ; perimeter
G1 X188.789 Y57.136 E0.01405 ; perimeter
G1 X188.548 Y57.226 E0.01059 ; perimeter
G1 X188.247 Y57.382 E0.01397 ; perimeter
G1 X187.982 Y57.573 E0.01344 ; perimeter
G1 X168.261 Y74.121 E1.06055 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X160.272 Y76.514 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.177 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.323 Y76.094 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.18617 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X187.555 Y56.715 E1.05580 ; perimeter
M73 Q98 S3
G1 X187.885 Y56.473 E0.01686 ; perimeter
G1 X188.139 Y56.334 E0.01193 ; perimeter
G1 X188.615 Y56.133 E0.02128 ; perimeter
G1 X189.002 Y56.038 E0.01643 ; perimeter
G1 X189.401 Y55.994 E0.01656 ; perimeter
G1 X189.704 Y56.000 E0.01247 ; perimeter
G1 X190.203 Y56.064 E0.02072 ; perimeter
G1 X190.586 Y56.175 E0.01644 ; perimeter
G1 X190.956 Y56.337 E0.01661 ; perimeter
G1 X191.230 Y56.498 E0.01312 ; perimeter
G1 X191.542 Y56.741 E0.01629 ; perimeter
G1 X190.440 Y57.666 E0.05928 ; perimeter
G1 X190.213 Y57.550 E0.01050 ; perimeter
G1 X189.992 Y57.483 E0.00950 ; perimeter
G1 X189.734 Y57.436 E0.01081 ; perimeter
G1 X189.462 Y57.423 E0.01122 ; perimeter
G1 X189.185 Y57.448 E0.01148 ; perimeter
G1 X188.905 Y57.515 E0.01185 ; perimeter
G1 X188.710 Y57.589 E0.00861 ; perimeter
G1 X188.455 Y57.721 E0.01181 ; perimeter
G1 X188.226 Y57.886 E0.01164 ; perimeter
G1 X168.405 Y74.517 E1.06589 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X160.223 Y77.073 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.159 Y76.712 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.323 Y76.094 E-0.30695 ; wipe and retract
G1 X160.826 Y74.833 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.600 F10800.000 ; lift Z
G1 X84.097 Y140.520 ; move to first perimeter point
G1 Z23.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.528 Y140.520 E0.18824 ; perimeter
G1 X79.528 Y139.842 E0.02793 ; perimeter
G1 X84.097 Y139.842 E0.18824 ; perimeter
G1 X84.097 Y140.460 E0.02546 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.401 Y140.916 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.223 Y140.916 E0.21329 ; perimeter
G1 X79.131 Y140.824 E0.00537 ; perimeter
G1 X79.131 Y139.446 E0.05679 ; perimeter
G1 X84.493 Y139.446 E0.22089 ; perimeter
G1 X84.493 Y140.824 E0.05679 ; perimeter
G1 X84.443 Y140.874 E0.00290 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.059 Y140.709 F10800.000 ; move inwards before travel
G1 F8640
G1 X81.152 Y140.901 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.600 F10800.000 ; lift Z
G1 X73.553 Y135.479 ; move to first perimeter point
G1 Z23.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X46.878 Y113.096 E1.43453 ; perimeter
G1 X46.594 Y112.821 E0.01629 ; perimeter
G1 X46.363 Y112.526 E0.01542 ; perimeter
G1 X46.176 Y112.202 E0.01544 ; perimeter
G1 X46.036 Y111.854 E0.01545 ; perimeter
G1 X45.947 Y111.494 E0.01528 ; perimeter
G1 X45.907 Y111.030 E0.01916 ; perimeter
G1 X45.931 Y110.661 E0.01524 ; perimeter
G1 X46.008 Y110.294 E0.01544 ; perimeter
G1 X46.136 Y109.942 E0.01545 ; perimeter
G1 X46.312 Y109.610 E0.01546 ; perimeter
G1 X46.545 Y109.289 E0.01636 ; perimeter
G1 X47.102 Y108.626 E0.03567 ; perimeter
G1 X47.512 Y108.970 E0.02205 ; perimeter
G1 X47.087 Y109.476 E0.02722 ; perimeter
G1 X46.862 Y109.796 E0.01612 ; perimeter
G1 X46.685 Y110.176 E0.01725 ; perimeter
G1 X46.577 Y110.580 E0.01725 ; perimeter
G1 X46.540 Y111.008 E0.01768 ; perimeter
G1 X46.599 Y111.496 E0.02026 ; perimeter
G1 X46.685 Y111.819 E0.01376 ; perimeter
G1 X46.862 Y112.198 E0.01725 ; perimeter
G1 X47.102 Y112.541 E0.01725 ; perimeter
G1 X47.379 Y112.818 E0.01612 ; perimeter
G1 X73.897 Y135.069 E1.42608 ; perimeter
G1 X73.592 Y135.433 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X73.602 Y136.038 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.613 Y113.391 E1.45143 ; perimeter
G1 X46.298 Y113.087 E0.01800 ; perimeter
G1 X46.034 Y112.748 E0.01771 ; perimeter
G1 X45.819 Y112.376 E0.01773 ; perimeter
G1 X45.658 Y111.976 E0.01775 ; perimeter
G1 X45.555 Y111.559 E0.01770 ; perimeter
G1 X45.509 Y111.034 E0.02169 ; perimeter
G1 X45.538 Y110.607 E0.01765 ; perimeter
G1 X45.626 Y110.186 E0.01773 ; perimeter
G1 X45.773 Y109.781 E0.01774 ; perimeter
G1 X45.975 Y109.400 E0.01775 ; perimeter
G1 X46.232 Y109.045 E0.01808 ; perimeter
G1 X47.053 Y108.067 E0.05257 ; perimeter
G1 X48.070 Y108.921 E0.05471 ; perimeter
G1 X47.402 Y109.717 E0.04284 ; perimeter
G1 X47.207 Y109.995 E0.01398 ; perimeter
G1 X47.059 Y110.312 E0.01439 ; perimeter
G1 X46.969 Y110.649 E0.01439 ; perimeter
G1 X46.938 Y111.001 E0.01455 ; perimeter
G1 X46.989 Y111.421 E0.01740 ; perimeter
G1 X47.059 Y111.683 E0.01118 ; perimeter
G1 X47.207 Y111.999 E0.01439 ; perimeter
G1 X47.407 Y112.285 E0.01439 ; perimeter
G1 X47.647 Y112.525 E0.01398 ; perimeter
G1 X74.456 Y135.020 E1.44169 ; perimeter
G1 X73.641 Y135.992 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X73.299 Y135.777 F10800.000 ; move inwards before travel
G1 F8640
G1 X71.116 Y133.880 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.600 F10800.000 ; lift Z
G1 X89.489 Y114.699 ; move to first perimeter point
G1 Z23.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.15587 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X61.733 Y95.719 E1.06055 ; perimeter
G1 X61.468 Y95.528 E0.01344 ; perimeter
G1 X61.167 Y95.372 E0.01397 ; perimeter
G1 X60.926 Y95.282 E0.01059 ; perimeter
G1 X60.595 Y95.202 E0.01405 ; perimeter
G1 X60.261 Y95.171 E0.01380 ; perimeter
G1 X59.935 Y95.187 E0.01346 ; perimeter
G1 X59.629 Y95.244 E0.01281 ; perimeter
G1 X59.328 Y95.340 E0.01300 ; perimeter
G1 X58.816 Y94.910 E0.02757 ; perimeter
G1 X59.264 Y94.695 E0.02047 ; perimeter
G1 X59.600 Y94.597 E0.01442 ; perimeter
G1 X59.938 Y94.546 E0.01409 ; perimeter
G1 X60.392 Y94.548 E0.01870 ; perimeter
G1 X60.644 Y94.575 E0.01043 ; perimeter
G1 X60.983 Y94.659 E0.01442 ; perimeter
G1 X61.310 Y94.786 E0.01442 ; perimeter
G1 X61.616 Y94.954 E0.01442 ; perimeter
G1 X61.915 Y95.173 E0.01526 ; perimeter
G1 X81.649 Y111.732 E1.06121 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X89.833 Y114.289 E0.16390 ; perimeter
G1 X89.528 Y114.653 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.538 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.16626 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X61.489 Y96.032 E1.06589 ; perimeter
G1 X61.260 Y95.867 E0.01164 ; perimeter
G1 X61.005 Y95.735 E0.01181 ; perimeter
G1 X60.810 Y95.661 E0.00861 ; perimeter
G1 X60.530 Y95.594 E0.01185 ; perimeter
G1 X60.252 Y95.569 E0.01148 ; perimeter
G1 X59.980 Y95.582 E0.01122 ; perimeter
G1 X59.723 Y95.630 E0.01081 ; perimeter
G1 X59.502 Y95.696 E0.00950 ; perimeter
G1 X59.275 Y95.813 E0.01050 ; perimeter
G1 X58.171 Y94.886 E0.05935 ; perimeter
G1 X58.485 Y94.644 E0.01633 ; perimeter
G1 X58.759 Y94.483 E0.01309 ; perimeter
G1 X59.128 Y94.321 E0.01661 ; perimeter
G1 X59.514 Y94.209 E0.01655 ; perimeter
G1 X59.909 Y94.149 E0.01644 ; perimeter
G1 X60.415 Y94.151 E0.02084 ; perimeter
G1 X60.713 Y94.184 E0.01236 ; perimeter
G1 X61.103 Y94.280 E0.01656 ; perimeter
G1 X61.478 Y94.426 E0.01656 ; perimeter
G1 X61.830 Y94.619 E0.01656 ; perimeter
G1 X62.160 Y94.861 E0.01686 ; perimeter
G1 X81.793 Y111.335 E1.05580 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X90.392 Y114.240 E0.18617 ; perimeter
G1 X89.577 Y115.212 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.257 Y114.972 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.024 Y113.134 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.600 F10800.000 ; lift Z
G1 X165.333 Y140.520 ; move to first perimeter point
G1 Z23.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.333 Y139.842 E0.02793 ; perimeter
G1 X169.902 Y139.842 E0.18824 ; perimeter
G1 X169.902 Y140.520 E0.02793 ; perimeter
G1 X165.393 Y140.520 E0.18576 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.029 Y140.916 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X164.936 Y140.824 E0.00537 ; perimeter
M73 P98 R2
G1 X164.936 Y139.446 E0.05679 ; perimeter
G1 X170.298 Y139.446 E0.22089 ; perimeter
G1 X170.298 Y140.824 E0.05679 ; perimeter
G1 X170.206 Y140.916 E0.00537 ; perimeter
G1 X165.089 Y140.916 E0.21082 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.028 Y140.786 F10800.000 ; move inwards before travel
G1 F8640
G1 X164.936 Y140.824 E-0.04109 ; wipe and retract
G1 X164.936 Y139.446 E-0.31828 ; wipe and retract
G1 X166.671 Y139.446 E-0.40063 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.600 F10800.000 ; lift Z
G1 X175.876 Y135.479 ; move to first perimeter point
G1 Z23.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X175.532 Y135.069 E0.02205 ; perimeter
G1 X202.050 Y112.818 E1.42608 ; perimeter
G1 X202.327 Y112.541 E0.01613 ; perimeter
G1 X202.567 Y112.198 E0.01725 ; perimeter
G1 X202.744 Y111.819 E0.01725 ; perimeter
G1 X202.853 Y111.414 E0.01725 ; perimeter
G1 X202.889 Y110.997 E0.01725 ; perimeter
G1 X202.853 Y110.580 E0.01725 ; perimeter
G1 X202.744 Y110.176 E0.01725 ; perimeter
G1 X202.567 Y109.796 E0.01725 ; perimeter
G1 X202.343 Y109.476 E0.01612 ; perimeter
G1 X201.918 Y108.970 E0.02722 ; perimeter
G1 X202.328 Y108.626 E0.02205 ; perimeter
G1 X202.885 Y109.289 E0.03567 ; perimeter
G1 X203.118 Y109.610 E0.01636 ; perimeter
G1 X203.291 Y109.937 E0.01522 ; perimeter
G1 X203.442 Y110.379 E0.01925 ; perimeter
G1 X203.498 Y110.658 E0.01174 ; perimeter
G1 X203.523 Y111.030 E0.01535 ; perimeter
G1 X203.482 Y111.494 E0.01916 ; perimeter
G1 X203.393 Y111.854 E0.01528 ; perimeter
G1 X203.253 Y112.204 E0.01554 ; perimeter
G1 X203.118 Y112.441 E0.01125 ; perimeter
G1 X202.831 Y112.826 E0.01977 ; perimeter
G1 X202.552 Y113.096 E0.01600 ; perimeter
G1 X175.922 Y135.441 E1.43206 ; perimeter
M204 S1000 ; adjust acceleration
G1 X175.827 Y136.038 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X174.974 Y135.020 E0.05471 ; perimeter
G1 X201.782 Y112.525 E1.44169 ; perimeter
G1 X202.022 Y112.285 E0.01398 ; perimeter
G1 X202.223 Y111.999 E0.01439 ; perimeter
G1 X202.370 Y111.683 E0.01439 ; perimeter
G1 X202.461 Y111.345 E0.01439 ; perimeter
G1 X202.491 Y110.997 E0.01439 ; perimeter
G1 X202.461 Y110.649 E0.01439 ; perimeter
G1 X202.370 Y110.312 E0.01439 ; perimeter
G1 X202.223 Y109.995 E0.01439 ; perimeter
G1 X202.028 Y109.717 E0.01398 ; perimeter
G1 X201.360 Y108.921 E0.04284 ; perimeter
G1 X202.377 Y108.067 E0.05471 ; perimeter
G1 X203.197 Y109.045 E0.05257 ; perimeter
G1 X203.455 Y109.400 E0.01808 ; perimeter
G1 X203.656 Y109.779 E0.01767 ; perimeter
G1 X203.825 Y110.275 E0.02162 ; perimeter
G1 X203.892 Y110.606 E0.01389 ; perimeter
G1 X203.921 Y111.034 E0.01769 ; perimeter
G1 X203.874 Y111.559 E0.02169 ; perimeter
G1 X203.771 Y111.976 E0.01770 ; perimeter
G1 X203.610 Y112.376 E0.01778 ; perimeter
G1 X203.450 Y112.658 E0.01336 ; perimeter
G1 X203.130 Y113.089 E0.02212 ; perimeter
G1 X202.817 Y113.391 E0.01790 ; perimeter
G1 X175.873 Y135.999 E1.44896 ; perimeter
M204 S1000 ; adjust acceleration
G1 X175.758 Y135.644 F10800.000 ; move inwards before travel
G1 F8640
G1 X174.974 Y135.020 E-0.30695 ; wipe and retract
G1 X176.477 Y133.759 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.600 F10800.000 ; lift Z
G1 X159.940 Y114.699 ; move to first perimeter point
G1 Z23.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.596 Y114.289 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.16390 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X187.515 Y95.173 E1.06121 ; perimeter
G1 X187.813 Y94.954 E0.01526 ; perimeter
G1 X188.026 Y94.837 E0.01002 ; perimeter
G1 X188.454 Y94.657 E0.01914 ; perimeter
G1 X188.786 Y94.576 E0.01406 ; perimeter
G1 X189.134 Y94.537 E0.01442 ; perimeter
G1 X189.390 Y94.542 E0.01054 ; perimeter
G1 X189.837 Y94.599 E0.01858 ; perimeter
G1 X190.166 Y94.695 E0.01410 ; perimeter
G1 X190.614 Y94.910 E0.02048 ; perimeter
G1 X190.101 Y95.340 E0.02757 ; perimeter
G1 X189.801 Y95.244 E0.01300 ; perimeter
G1 X189.495 Y95.187 E0.01281 ; perimeter
G1 X189.169 Y95.171 E0.01346 ; perimeter
G1 X188.835 Y95.202 E0.01380 ; perimeter
G1 X188.503 Y95.282 E0.01405 ; perimeter
G1 X188.263 Y95.372 E0.01059 ; perimeter
G1 X187.962 Y95.528 E0.01397 ; perimeter
G1 X187.697 Y95.719 E0.01344 ; perimeter
G1 X167.976 Y112.267 E1.06055 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.986 Y114.661 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.892 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.038 Y114.240 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.18617 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X187.270 Y94.861 E1.05580 ; perimeter
G1 X187.600 Y94.619 E0.01686 ; perimeter
G1 X187.854 Y94.480 E0.01193 ; perimeter
G1 X188.330 Y94.279 E0.02128 ; perimeter
G1 X188.717 Y94.184 E0.01643 ; perimeter
G1 X189.116 Y94.140 E0.01656 ; perimeter
G1 X189.419 Y94.147 E0.01247 ; perimeter
G1 X189.918 Y94.210 E0.02072 ; perimeter
G1 X190.301 Y94.321 E0.01644 ; perimeter
G1 X190.671 Y94.483 E0.01661 ; perimeter
G1 X190.945 Y94.644 E0.01312 ; perimeter
G1 X191.257 Y94.888 E0.01629 ; perimeter
G1 X190.155 Y95.813 E0.05928 ; perimeter
G1 X189.928 Y95.696 E0.01050 ; perimeter
G1 X189.707 Y95.630 E0.00950 ; perimeter
G1 X189.449 Y95.582 E0.01081 ; perimeter
G1 X189.177 Y95.569 E0.01122 ; perimeter
G1 X188.900 Y95.594 E0.01148 ; perimeter
G1 X188.620 Y95.661 E0.01185 ; perimeter
G1 X188.424 Y95.735 E0.00861 ; perimeter
G1 X188.170 Y95.867 E0.01181 ; perimeter
G1 X187.941 Y96.032 E0.01164 ; perimeter
G1 X168.120 Y112.663 E1.06589 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X159.938 Y115.219 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.874 Y114.858 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;23.25


G1 F8640
G1 X159.038 Y114.240 E-0.30695 ; wipe and retract
G1 X160.541 Y112.979 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.600 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;23.25
G1 X84.132 Y102.124 ; move to first perimeter point
G1 Z23.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X80.063 Y102.124 E0.16764 ; perimeter
G1 X80.063 Y101.840 E0.01168 ; perimeter
G1 X84.132 Y101.840 E0.16764 ; perimeter
G1 X84.132 Y102.064 E0.00921 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.528 Y102.520 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.666 Y102.520 E0.20029 ; perimeter
G1 X79.666 Y101.444 E0.04434 ; perimeter
G1 X84.528 Y101.444 E0.20029 ; perimeter
G1 X84.528 Y102.460 E0.04187 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.130 Y102.491 F10800.000 ; move inwards before travel
G1 F8640
G1 X81.237 Y102.501 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.850 F10800.000 ; lift Z
G1 X73.647 Y97.173 ; move to first perimeter point
G1 Z23.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.163 Y74.950 E1.42422 ; perimeter
G1 X46.877 Y74.674 E0.01638 ; perimeter
G1 X46.646 Y74.377 E0.01550 ; perimeter
G1 X46.459 Y74.050 E0.01551 ; perimeter
G1 X46.319 Y73.700 E0.01553 ; perimeter
G1 X46.230 Y73.337 E0.01540 ; perimeter
G1 X46.192 Y72.894 E0.01831 ; perimeter
G1 X46.215 Y72.522 E0.01537 ; perimeter
G1 X46.292 Y72.153 E0.01551 ; perimeter
G1 X46.420 Y71.799 E0.01552 ; perimeter
G1 X46.596 Y71.466 E0.01553 ; perimeter
G1 X46.830 Y71.143 E0.01644 ; perimeter
G1 X47.226 Y70.671 E0.02537 ; perimeter
G1 X47.636 Y71.015 E0.02205 ; perimeter
G1 X47.372 Y71.330 E0.01692 ; perimeter
G1 X47.148 Y71.650 E0.01612 ; perimeter
G1 X46.971 Y72.030 E0.01725 ; perimeter
G1 X46.862 Y72.434 E0.01725 ; perimeter
G1 X46.825 Y72.859 E0.01759 ; perimeter
G1 X46.879 Y73.330 E0.01951 ; perimeter
G1 X46.971 Y73.673 E0.01462 ; perimeter
G1 X47.148 Y74.052 E0.01725 ; perimeter
G1 X47.388 Y74.395 E0.01725 ; perimeter
G1 X47.664 Y74.672 E0.01612 ; perimeter
G1 X73.991 Y96.763 E1.41578 ; perimeter
G1 X73.686 Y97.127 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X73.696 Y97.731 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.898 Y75.245 E1.44113 ; perimeter
G1 X46.582 Y74.939 E0.01811 ; perimeter
G1 X46.316 Y74.598 E0.01780 ; perimeter
G1 X46.101 Y74.223 E0.01782 ; perimeter
G1 X45.940 Y73.821 E0.01783 ; perimeter
G1 X45.838 Y73.402 E0.01779 ; perimeter
G1 X45.794 Y72.899 E0.02079 ; perimeter
G1 X45.822 Y72.469 E0.01776 ; perimeter
G1 X45.910 Y72.045 E0.01782 ; perimeter
G1 X46.056 Y71.638 E0.01783 ; perimeter
G1 X46.259 Y71.255 E0.01783 ; perimeter
G1 X46.518 Y70.899 E0.01817 ; perimeter
G1 X47.177 Y70.113 E0.04227 ; perimeter
G1 X48.194 Y70.966 E0.05471 ; perimeter
G1 X47.687 Y71.571 E0.03254 ; perimeter
G1 X47.492 Y71.849 E0.01398 ; perimeter
G1 X47.344 Y72.166 E0.01439 ; perimeter
G1 X47.254 Y72.503 E0.01439 ; perimeter
G1 X47.223 Y72.854 E0.01451 ; perimeter
G1 X47.269 Y73.256 E0.01665 ; perimeter
G1 X47.344 Y73.537 E0.01198 ; perimeter
G1 X47.492 Y73.853 E0.01439 ; perimeter
G1 X47.692 Y74.139 E0.01439 ; perimeter
G1 X47.932 Y74.379 E0.01398 ; perimeter
G1 X74.550 Y96.714 E1.43139 ; perimeter
G1 X73.734 Y97.685 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X73.393 Y97.470 F10800.000 ; move inwards before travel
G1 F8640
G1 X71.209 Y95.574 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.850 F10800.000 ; lift Z
G1 X89.774 Y76.553 ; move to first perimeter point
G1 Z23.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.15587 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X62.018 Y57.573 E1.06053 ; perimeter
G1 X61.758 Y57.385 E0.01321 ; perimeter
G1 X61.461 Y57.230 E0.01382 ; perimeter
G1 X61.205 Y57.133 E0.01128 ; perimeter
G1 X60.877 Y57.056 E0.01387 ; perimeter
G1 X60.551 Y57.025 E0.01351 ; perimeter
G1 X60.232 Y57.040 E0.01316 ; perimeter
G1 X59.894 Y57.103 E0.01414 ; perimeter
G1 X59.342 Y56.639 E0.02971 ; perimeter
G1 X59.549 Y56.548 E0.00933 ; perimeter
G1 X59.885 Y56.451 E0.01442 ; perimeter
G1 X60.225 Y56.399 E0.01416 ; perimeter
G1 X60.653 Y56.399 E0.01763 ; perimeter
G1 X60.929 Y56.429 E0.01144 ; perimeter
G1 X61.269 Y56.513 E0.01442 ; perimeter
G1 X61.595 Y56.640 E0.01442 ; perimeter
G1 X61.902 Y56.808 E0.01442 ; perimeter
G1 X62.200 Y57.027 E0.01526 ; perimeter
G1 X81.934 Y73.586 E1.06121 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.118 Y76.143 E0.16390 ; perimeter
G1 X89.813 Y76.507 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.823 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.16626 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X61.774 Y57.886 E1.06589 ; perimeter
G1 X61.549 Y57.723 E0.01144 ; perimeter
G1 X61.299 Y57.592 E0.01165 ; perimeter
G1 X61.089 Y57.513 E0.00924 ; perimeter
G1 X60.813 Y57.448 E0.01167 ; perimeter
G1 X60.541 Y57.423 E0.01125 ; perimeter
G1 X60.275 Y57.434 E0.01097 ; perimeter
G1 X60.017 Y57.480 E0.01081 ; perimeter
G1 X59.813 Y57.552 E0.00890 ; perimeter
G1 X58.662 Y56.586 E0.06191 ; perimeter
G1 X58.815 Y56.470 E0.00791 ; perimeter
G1 X59.044 Y56.337 E0.01092 ; perimeter
G1 X59.414 Y56.175 E0.01663 ; perimeter
G1 X59.800 Y56.063 E0.01655 ; perimeter
G1 X60.195 Y56.003 E0.01646 ; perimeter
G1 X60.675 Y56.002 E0.01976 ; perimeter
G1 X60.998 Y56.038 E0.01341 ; perimeter
G1 X61.388 Y56.134 E0.01655 ; perimeter
G1 X61.763 Y56.280 E0.01655 ; perimeter
G1 X62.115 Y56.473 E0.01655 ; perimeter
G1 X62.445 Y56.715 E0.01686 ; perimeter
G1 X82.078 Y73.189 E1.05580 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X90.677 Y76.094 E0.18617 ; perimeter
G1 X89.862 Y77.065 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.543 Y76.826 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.309 Y74.987 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.850 F10800.000 ; lift Z
G1 X165.868 Y102.124 ; move to first perimeter point
G1 Z23.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.868 Y101.840 E0.01168 ; perimeter
G1 X169.937 Y101.840 E0.16764 ; perimeter
G1 X169.937 Y102.124 E0.01168 ; perimeter
G1 X165.928 Y102.124 E0.16517 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.472 Y102.520 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.472 Y101.444 E0.04434 ; perimeter
G1 X170.334 Y101.444 E0.20029 ; perimeter
G1 X170.334 Y102.520 E0.04434 ; perimeter
G1 X165.532 Y102.520 E0.19782 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.646 Y102.160 F10800.000 ; move inwards before travel
G1 F8640
G1 X165.472 Y101.444 E-0.24891 ; wipe and retract
G1 X167.685 Y101.444 E-0.51109 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.850 F10800.000 ; lift Z
G1 X176.353 Y97.173 ; move to first perimeter point
G1 Z23.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X176.009 Y96.763 E0.02205 ; perimeter
G1 X202.336 Y74.672 E1.41578 ; perimeter
G1 X202.612 Y74.395 E0.01613 ; perimeter
G1 X202.852 Y74.052 E0.01725 ; perimeter
G1 X203.029 Y73.673 E0.01725 ; perimeter
G1 X203.138 Y73.268 E0.01725 ; perimeter
G1 X203.174 Y72.851 E0.01725 ; perimeter
G1 X203.138 Y72.434 E0.01725 ; perimeter
G1 X203.029 Y72.030 E0.01725 ; perimeter
G1 X202.852 Y71.650 E0.01725 ; perimeter
G1 X202.628 Y71.330 E0.01612 ; perimeter
G1 X202.364 Y71.015 E0.01692 ; perimeter
G1 X202.774 Y70.671 E0.02205 ; perimeter
G1 X203.170 Y71.143 E0.02537 ; perimeter
G1 X203.404 Y71.466 E0.01644 ; perimeter
G1 X203.578 Y71.795 E0.01535 ; perimeter
G1 X203.724 Y72.217 E0.01838 ; perimeter
G1 X203.784 Y72.520 E0.01275 ; perimeter
G1 X203.808 Y72.894 E0.01545 ; perimeter
G1 X203.770 Y73.337 E0.01831 ; perimeter
G1 X203.681 Y73.700 E0.01540 ; perimeter
G1 X203.541 Y74.052 E0.01559 ; perimeter
G1 X203.392 Y74.313 E0.01238 ; perimeter
G1 X203.119 Y74.677 E0.01877 ; perimeter
G1 X202.837 Y74.950 E0.01616 ; perimeter
G1 X176.399 Y97.134 E1.42175 ; perimeter
M204 S1000 ; adjust acceleration
G1 X176.304 Y97.731 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X175.450 Y96.714 E0.05471 ; perimeter
G1 X202.068 Y74.379 E1.43139 ; perimeter
G1 X202.308 Y74.139 E0.01398 ; perimeter
G1 X202.508 Y73.853 E0.01439 ; perimeter
G1 X202.656 Y73.537 E0.01439 ; perimeter
G1 X202.746 Y73.199 E0.01439 ; perimeter
G1 X202.776 Y72.851 E0.01439 ; perimeter
G1 X202.746 Y72.503 E0.01439 ; perimeter
G1 X202.656 Y72.166 E0.01439 ; perimeter
G1 X202.508 Y71.849 E0.01439 ; perimeter
G1 X202.313 Y71.571 E0.01398 ; perimeter
G1 X201.806 Y70.966 E0.03254 ; perimeter
G1 X202.823 Y70.113 E0.05471 ; perimeter
G1 X203.482 Y70.899 E0.04227 ; perimeter
G1 X203.741 Y71.255 E0.01817 ; perimeter
G1 X203.943 Y71.637 E0.01777 ; perimeter
G1 X204.107 Y72.113 E0.02074 ; perimeter
G1 X204.178 Y72.468 E0.01494 ; perimeter
G1 X204.206 Y72.899 E0.01779 ; perimeter
G1 X204.162 Y73.402 E0.02079 ; perimeter
G1 X204.060 Y73.821 E0.01779 ; perimeter
G1 X203.899 Y74.224 E0.01786 ; perimeter
G1 X203.725 Y74.531 E0.01454 ; perimeter
G1 X203.417 Y74.941 E0.02111 ; perimeter
G1 X203.102 Y75.245 E0.01803 ; perimeter
G1 X176.350 Y97.692 E1.43865 ; perimeter
M204 S1000 ; adjust acceleration
G1 X176.235 Y97.337 F10800.000 ; move inwards before travel
G1 F8640
G1 X175.450 Y96.714 E-0.30695 ; wipe and retract
G1 X176.954 Y95.452 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.850 F10800.000 ; lift Z
G1 X160.226 Y76.553 ; move to first perimeter point
G1 Z23.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.882 Y76.143 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.16390 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X187.800 Y57.027 E1.06121 ; perimeter
G1 X188.098 Y56.808 E0.01526 ; perimeter
G1 X188.335 Y56.678 E0.01113 ; perimeter
G1 X188.738 Y56.511 E0.01796 ; perimeter
G1 X189.071 Y56.429 E0.01414 ; perimeter
G1 X189.419 Y56.391 E0.01442 ; perimeter
G1 X189.699 Y56.397 E0.01152 ; perimeter
G1 X190.121 Y56.453 E0.01754 ; perimeter
G1 X190.451 Y56.548 E0.01417 ; perimeter
G1 X190.658 Y56.639 E0.00933 ; perimeter
G1 X190.106 Y57.103 E0.02971 ; perimeter
G1 X189.768 Y57.040 E0.01414 ; perimeter
G1 X189.449 Y57.025 E0.01316 ; perimeter
G1 X189.123 Y57.056 E0.01351 ; perimeter
G1 X188.795 Y57.133 E0.01387 ; perimeter
G1 X188.539 Y57.230 E0.01128 ; perimeter
G1 X188.242 Y57.385 E0.01382 ; perimeter
G1 X187.982 Y57.573 E0.01321 ; perimeter
G1 X168.261 Y74.121 E1.06053 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X160.272 Y76.514 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.177 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.323 Y76.094 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.18617 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X187.555 Y56.715 E1.05580 ; perimeter
G1 X187.885 Y56.473 E0.01686 ; perimeter
G1 X188.163 Y56.320 E0.01309 ; perimeter
G1 X188.614 Y56.133 E0.02010 ; perimeter
G1 X189.002 Y56.038 E0.01645 ; perimeter
G1 X189.401 Y55.994 E0.01656 ; perimeter
G1 X189.729 Y56.001 E0.01350 ; perimeter
G1 X190.202 Y56.064 E0.01968 ; perimeter
G1 X190.586 Y56.175 E0.01646 ; perimeter
G1 X190.956 Y56.337 E0.01663 ; perimeter
G1 X191.185 Y56.470 E0.01092 ; perimeter
G1 X191.338 Y56.586 E0.00791 ; perimeter
G1 X190.187 Y57.552 E0.06190 ; perimeter
G1 X189.983 Y57.480 E0.00890 ; perimeter
G1 X189.725 Y57.434 E0.01081 ; perimeter
G1 X189.459 Y57.423 E0.01097 ; perimeter
G1 X189.187 Y57.448 E0.01125 ; perimeter
G1 X188.911 Y57.513 E0.01167 ; perimeter
G1 X188.701 Y57.592 E0.00924 ; perimeter
G1 X188.451 Y57.723 E0.01164 ; perimeter
G1 X188.226 Y57.886 E0.01144 ; perimeter
G1 X168.405 Y74.517 E1.06589 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X160.223 Y77.073 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.159 Y76.712 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.323 Y76.094 E-0.30695 ; wipe and retract
G1 X160.826 Y74.833 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.850 F10800.000 ; lift Z
G1 X83.847 Y140.270 ; move to first perimeter point
G1 Z23.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.778 Y140.270 E0.16764 ; perimeter
G1 X79.778 Y139.986 E0.01168 ; perimeter
G1 X83.847 Y139.986 E0.16764 ; perimeter
G1 X83.847 Y140.210 E0.00921 ; perimeter
M204 S1000 ; adjust acceleration
G1 X84.243 Y140.666 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X79.381 Y140.666 E0.20029 ; perimeter
G1 X79.381 Y139.590 E0.04434 ; perimeter
G1 X84.243 Y139.590 E0.20029 ; perimeter
G1 X84.243 Y140.606 E0.04187 ; perimeter
M204 S1000 ; adjust acceleration
G1 X83.844 Y140.637 F10800.000 ; move inwards before travel
G1 F8640
G1 X80.952 Y140.647 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.850 F10800.000 ; lift Z
G1 X73.362 Y135.319 ; move to first perimeter point
G1 Z23.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X46.878 Y113.096 E1.42422 ; perimeter
G1 X46.592 Y112.820 E0.01638 ; perimeter
G1 X46.361 Y112.523 E0.01550 ; perimeter
G1 X46.174 Y112.196 E0.01551 ; perimeter
G1 X46.034 Y111.846 E0.01553 ; perimeter
G1 X45.945 Y111.483 E0.01540 ; perimeter
G1 X45.906 Y111.040 E0.01831 ; perimeter
G1 X45.930 Y110.668 E0.01537 ; perimeter
G1 X46.007 Y110.299 E0.01551 ; perimeter
G1 X46.134 Y109.945 E0.01552 ; perimeter
G1 X46.311 Y109.612 E0.01553 ; perimeter
G1 X46.545 Y109.289 E0.01644 ; perimeter
G1 X46.941 Y108.817 E0.02537 ; perimeter
G1 X47.351 Y109.161 E0.02205 ; perimeter
G1 X47.087 Y109.476 E0.01692 ; perimeter
G1 X46.862 Y109.796 E0.01612 ; perimeter
G1 X46.685 Y110.176 E0.01725 ; perimeter
G1 X46.577 Y110.580 E0.01725 ; perimeter
G1 X46.540 Y111.006 E0.01759 ; perimeter
G1 X46.594 Y111.476 E0.01951 ; perimeter
G1 X46.685 Y111.819 E0.01462 ; perimeter
G1 X46.862 Y112.198 E0.01725 ; perimeter
G1 X47.102 Y112.541 E0.01725 ; perimeter
G1 X47.379 Y112.818 E0.01612 ; perimeter
G1 X73.706 Y134.909 E1.41578 ; perimeter
G1 X73.400 Y135.273 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X73.411 Y135.877 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.613 Y113.391 E1.44113 ; perimeter
G1 X46.297 Y113.085 E0.01811 ; perimeter
G1 X46.031 Y112.745 E0.01780 ; perimeter
G1 X45.816 Y112.369 E0.01782 ; perimeter
G1 X45.655 Y111.967 E0.01783 ; perimeter
G1 X45.553 Y111.548 E0.01779 ; perimeter
G1 X45.509 Y111.045 E0.02079 ; perimeter
G1 X45.536 Y110.615 E0.01776 ; perimeter
G1 X45.624 Y110.191 E0.01782 ; perimeter
G1 X45.771 Y109.784 E0.01783 ; perimeter
G1 X45.973 Y109.402 E0.01783 ; perimeter
G1 X46.232 Y109.045 E0.01817 ; perimeter
G1 X46.892 Y108.259 E0.04227 ; perimeter
G1 X47.909 Y109.112 E0.05471 ; perimeter
G1 X47.402 Y109.717 E0.03254 ; perimeter
G1 X47.207 Y109.995 E0.01398 ; perimeter
G1 X47.059 Y110.312 E0.01439 ; perimeter
G1 X46.969 Y110.649 E0.01439 ; perimeter
G1 X46.938 Y111.000 E0.01451 ; perimeter
G1 X46.984 Y111.402 E0.01665 ; perimeter
G1 X47.059 Y111.683 E0.01198 ; perimeter
G1 X47.207 Y111.999 E0.01439 ; perimeter
G1 X47.407 Y112.285 E0.01439 ; perimeter
G1 X47.647 Y112.525 E0.01398 ; perimeter
G1 X74.264 Y134.860 E1.43139 ; perimeter
G1 X73.449 Y135.831 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X73.108 Y135.616 F10800.000 ; move inwards before travel
G1 F8640
G1 X70.924 Y133.720 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.850 F10800.000 ; lift Z
G1 X89.489 Y114.699 ; move to first perimeter point
G1 Z23.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.15587 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X61.733 Y95.719 E1.06053 ; perimeter
G1 X61.473 Y95.531 E0.01321 ; perimeter
G1 X61.176 Y95.376 E0.01382 ; perimeter
G1 X60.920 Y95.279 E0.01128 ; perimeter
G1 X60.592 Y95.202 E0.01387 ; perimeter
G1 X60.265 Y95.172 E0.01351 ; perimeter
G1 X59.946 Y95.186 E0.01316 ; perimeter
G1 X59.609 Y95.249 E0.01414 ; perimeter
G1 X59.057 Y94.785 E0.02971 ; perimeter
G1 X59.264 Y94.695 E0.00933 ; perimeter
G1 X59.600 Y94.597 E0.01442 ; perimeter
G1 X59.940 Y94.545 E0.01416 ; perimeter
G1 X60.368 Y94.545 E0.01763 ; perimeter
G1 X60.644 Y94.576 E0.01144 ; perimeter
G1 X60.984 Y94.659 E0.01442 ; perimeter
G1 X61.310 Y94.786 E0.01442 ; perimeter
G1 X61.616 Y94.954 E0.01442 ; perimeter
G1 X61.915 Y95.173 E0.01526 ; perimeter
G1 X81.649 Y111.732 E1.06121 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X89.833 Y114.289 E0.16390 ; perimeter
G1 X89.528 Y114.653 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.538 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.16626 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X61.489 Y96.032 E1.06589 ; perimeter
G1 X61.264 Y95.869 E0.01144 ; perimeter
G1 X61.014 Y95.738 E0.01165 ; perimeter
G1 X60.804 Y95.659 E0.00924 ; perimeter
G1 X60.528 Y95.594 E0.01167 ; perimeter
G1 X60.256 Y95.569 E0.01125 ; perimeter
G1 X59.990 Y95.581 E0.01097 ; perimeter
G1 X59.731 Y95.626 E0.01081 ; perimeter
G1 X59.528 Y95.698 E0.00890 ; perimeter
G1 X58.376 Y94.732 E0.06191 ; perimeter
G1 X58.530 Y94.617 E0.00791 ; perimeter
G1 X58.759 Y94.483 E0.01092 ; perimeter
G1 X59.129 Y94.321 E0.01663 ; perimeter
G1 X59.515 Y94.209 E0.01655 ; perimeter
G1 X59.910 Y94.149 E0.01646 ; perimeter
G1 X60.389 Y94.149 E0.01976 ; perimeter
G1 X60.713 Y94.184 E0.01341 ; perimeter
G1 X61.103 Y94.280 E0.01655 ; perimeter
G1 X61.478 Y94.426 E0.01655 ; perimeter
G1 X61.830 Y94.619 E0.01655 ; perimeter
G1 X62.160 Y94.861 E0.01686 ; perimeter
G1 X81.793 Y111.335 E1.05580 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X90.392 Y114.240 E0.18617 ; perimeter
G1 X89.577 Y115.212 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.257 Y114.972 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.024 Y113.134 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.850 F10800.000 ; lift Z
G1 X165.583 Y140.270 ; move to first perimeter point
G1 Z23.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.583 Y139.986 E0.01168 ; perimeter
G1 X169.652 Y139.986 E0.16764 ; perimeter
G1 X169.652 Y140.270 E0.01168 ; perimeter
G1 X165.643 Y140.270 E0.16517 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.186 Y140.666 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F2400
G1 X165.186 Y139.590 E0.04434 ; perimeter
G1 X170.048 Y139.590 E0.20029 ; perimeter
G1 X170.048 Y140.666 E0.04434 ; perimeter
G1 X165.246 Y140.666 E0.19782 ; perimeter
M204 S1000 ; adjust acceleration
G1 X165.361 Y140.306 F10800.000 ; move inwards before travel
G1 F8640
G1 X165.186 Y139.590 E-0.24891 ; wipe and retract
G1 X167.400 Y139.590 E-0.51109 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.850 F10800.000 ; lift Z
G1 X176.068 Y135.319 ; move to first perimeter point
G1 Z23.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X175.724 Y134.909 E0.02205 ; perimeter
G1 X202.050 Y112.818 E1.41578 ; perimeter
G1 X202.327 Y112.541 E0.01613 ; perimeter
G1 X202.567 Y112.198 E0.01725 ; perimeter
G1 X202.744 Y111.819 E0.01725 ; perimeter
G1 X202.853 Y111.414 E0.01725 ; perimeter
G1 X202.889 Y110.997 E0.01725 ; perimeter
G1 X202.853 Y110.580 E0.01725 ; perimeter
G1 X202.744 Y110.176 E0.01725 ; perimeter
G1 X202.567 Y109.796 E0.01725 ; perimeter
G1 X202.343 Y109.476 E0.01612 ; perimeter
G1 X202.079 Y109.161 E0.01692 ; perimeter
G1 X202.489 Y108.817 E0.02205 ; perimeter
G1 X202.885 Y109.289 E0.02537 ; perimeter
G1 X203.119 Y109.612 E0.01644 ; perimeter
G1 X203.293 Y109.941 E0.01535 ; perimeter
G1 X203.438 Y110.363 E0.01838 ; perimeter
G1 X203.499 Y110.666 E0.01275 ; perimeter
G1 X203.523 Y111.040 E0.01545 ; perimeter
G1 X203.484 Y111.483 E0.01831 ; perimeter
G1 X203.396 Y111.846 E0.01540 ; perimeter
G1 X203.255 Y112.198 E0.01559 ; perimeter
G1 X203.107 Y112.459 E0.01238 ; perimeter
G1 X202.834 Y112.824 E0.01877 ; perimeter
G1 X202.552 Y113.096 E0.01616 ; perimeter
G1 X176.114 Y135.280 E1.42175 ; perimeter
M204 S1000 ; adjust acceleration
G1 X176.019 Y135.877 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X175.165 Y134.860 E0.05471 ; perimeter
G1 X201.782 Y112.525 E1.43139 ; perimeter
G1 X202.022 Y112.285 E0.01398 ; perimeter
G1 X202.223 Y111.999 E0.01439 ; perimeter
G1 X202.370 Y111.683 E0.01439 ; perimeter
G1 X202.461 Y111.345 E0.01439 ; perimeter
G1 X202.491 Y110.997 E0.01439 ; perimeter
G1 X202.461 Y110.649 E0.01439 ; perimeter
G1 X202.370 Y110.312 E0.01439 ; perimeter
G1 X202.223 Y109.995 E0.01439 ; perimeter
G1 X202.028 Y109.717 E0.01398 ; perimeter
G1 X201.520 Y109.112 E0.03254 ; perimeter
G1 X202.538 Y108.259 E0.05471 ; perimeter
G1 X203.197 Y109.045 E0.04227 ; perimeter
G1 X203.456 Y109.402 E0.01817 ; perimeter
G1 X203.658 Y109.783 E0.01777 ; perimeter
G1 X203.822 Y110.259 E0.02074 ; perimeter
G1 X203.893 Y110.614 E0.01494 ; perimeter
G1 X203.921 Y111.045 E0.01779 ; perimeter
G1 X203.877 Y111.548 E0.02079 ; perimeter
G1 X203.774 Y111.967 E0.01779 ; perimeter
G1 X203.614 Y112.370 E0.01786 ; perimeter
G1 X203.439 Y112.677 E0.01454 ; perimeter
G1 X203.132 Y113.087 E0.02111 ; perimeter
G1 X202.817 Y113.391 E0.01803 ; perimeter
G1 X176.065 Y135.839 E1.43865 ; perimeter
M204 S1000 ; adjust acceleration
G1 X175.949 Y135.483 F10800.000 ; move inwards before travel
G1 F8640
G1 X175.165 Y134.860 E-0.30695 ; wipe and retract
G1 X176.668 Y133.599 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.850 F10800.000 ; lift Z
G1 X159.940 Y114.699 ; move to first perimeter point
G1 Z23.250 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.596 Y114.289 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.16390 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X187.515 Y95.173 E1.06121 ; perimeter
G1 X187.813 Y94.954 E0.01526 ; perimeter
G1 X188.050 Y94.824 E0.01113 ; perimeter
G1 X188.453 Y94.657 E0.01796 ; perimeter
G1 X188.786 Y94.576 E0.01414 ; perimeter
G1 X189.134 Y94.537 E0.01442 ; perimeter
G1 X189.413 Y94.543 E0.01152 ; perimeter
G1 X189.835 Y94.599 E0.01754 ; perimeter
G1 X190.166 Y94.695 E0.01417 ; perimeter
G1 X190.373 Y94.785 E0.00933 ; perimeter
G1 X189.821 Y95.249 E0.02971 ; perimeter
G1 X189.483 Y95.186 E0.01414 ; perimeter
G1 X189.164 Y95.172 E0.01316 ; perimeter
G1 X188.838 Y95.202 E0.01351 ; perimeter
G1 X188.510 Y95.279 E0.01387 ; perimeter
G1 X188.254 Y95.376 E0.01128 ; perimeter
G1 X187.957 Y95.531 E0.01382 ; perimeter
G1 X187.697 Y95.719 E0.01321 ; perimeter
G1 X167.976 Y112.267 E1.06053 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.986 Y114.661 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.892 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.038 Y114.240 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.18617 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X187.270 Y94.861 E1.05580 ; perimeter
G1 X187.600 Y94.619 E0.01686 ; perimeter
G1 X187.878 Y94.466 E0.01309 ; perimeter
G1 X188.329 Y94.280 E0.02010 ; perimeter
G1 X188.717 Y94.184 E0.01645 ; perimeter
G1 X189.116 Y94.140 E0.01656 ; perimeter
G1 X189.444 Y94.147 E0.01350 ; perimeter
G1 X189.917 Y94.210 E0.01968 ; perimeter
G1 X190.301 Y94.321 E0.01646 ; perimeter
G1 X190.671 Y94.483 E0.01663 ; perimeter
G1 X190.900 Y94.617 E0.01092 ; perimeter
G1 X191.053 Y94.732 E0.00791 ; perimeter
G1 X189.902 Y95.698 E0.06190 ; perimeter
G1 X189.698 Y95.626 E0.00890 ; perimeter
G1 X189.440 Y95.581 E0.01081 ; perimeter
G1 X189.174 Y95.569 E0.01097 ; perimeter
G1 X188.902 Y95.594 E0.01125 ; perimeter
G1 X188.626 Y95.659 E0.01167 ; perimeter
G1 X188.416 Y95.738 E0.00924 ; perimeter
G1 X188.166 Y95.869 E0.01164 ; perimeter
G1 X187.941 Y96.032 E0.01144 ; perimeter
G1 X168.120 Y112.663 E1.06589 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X159.938 Y115.219 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.874 Y114.858 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;23.5


G1 F8640
G1 X159.038 Y114.240 E-0.30695 ; wipe and retract
G1 X160.541 Y112.979 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z23.850 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;23.5
G1 X176.544 Y97.012 ; move to first perimeter point
G1 Z23.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X176.200 Y96.602 E0.02205 ; perimeter
G1 X202.336 Y74.672 E1.40548 ; perimeter
G1 X202.612 Y74.395 E0.01613 ; perimeter
G1 X202.852 Y74.052 E0.01725 ; perimeter
G1 X203.029 Y73.673 E0.01725 ; perimeter
G1 X203.138 Y73.268 E0.01725 ; perimeter
G1 X203.174 Y72.851 E0.01725 ; perimeter
G1 X203.138 Y72.434 E0.01725 ; perimeter
G1 X203.029 Y72.030 E0.01725 ; perimeter
G1 X202.852 Y71.650 E0.01725 ; perimeter
G1 X202.525 Y71.207 E0.02273 ; perimeter
G1 X202.935 Y70.862 E0.02205 ; perimeter
G1 X203.170 Y71.143 E0.01506 ; perimeter
G1 X203.405 Y71.467 E0.01651 ; perimeter
G1 X203.580 Y71.799 E0.01548 ; perimeter
G1 X203.720 Y72.201 E0.01750 ; perimeter
G1 X203.786 Y72.528 E0.01375 ; perimeter
G1 X203.809 Y72.904 E0.01555 ; perimeter
G1 X203.772 Y73.327 E0.01746 ; perimeter
G1 X203.684 Y73.693 E0.01552 ; perimeter
G1 X203.544 Y74.046 E0.01564 ; perimeter
G1 X203.382 Y74.331 E0.01351 ; perimeter
G1 X203.121 Y74.675 E0.01776 ; perimeter
G1 X202.837 Y74.950 E0.01632 ; perimeter
G1 X176.590 Y96.973 E1.41145 ; perimeter
M204 S1000 ; adjust acceleration
G1 X176.496 Y97.570 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X175.642 Y96.553 E0.05471 ; perimeter
G1 X202.068 Y74.379 E1.42109 ; perimeter
G1 X202.308 Y74.139 E0.01398 ; perimeter
G1 X202.508 Y73.853 E0.01439 ; perimeter
G1 X202.656 Y73.537 E0.01439 ; perimeter
G1 X202.746 Y73.199 E0.01439 ; perimeter
G1 X202.776 Y72.851 E0.01439 ; perimeter
G1 X202.746 Y72.503 E0.01439 ; perimeter
G1 X202.656 Y72.166 E0.01439 ; perimeter
G1 X202.508 Y71.849 E0.01439 ; perimeter
G1 X202.313 Y71.571 E0.01398 ; perimeter
G1 X201.966 Y71.158 E0.02224 ; perimeter
G1 X202.984 Y70.304 E0.05471 ; perimeter
G1 X203.482 Y70.899 E0.03197 ; perimeter
G1 X203.742 Y71.257 E0.01825 ; perimeter
G1 X203.945 Y71.641 E0.01787 ; perimeter
G1 X204.103 Y72.096 E0.01985 ; perimeter
G1 X204.180 Y72.476 E0.01598 ; perimeter
G1 X204.206 Y72.910 E0.01788 ; perimeter
G1 X204.164 Y73.391 E0.01989 ; perimeter
G1 X204.062 Y73.813 E0.01789 ; perimeter
G1 X203.902 Y74.217 E0.01793 ; perimeter
G1 X203.714 Y74.550 E0.01572 ; perimeter
G1 X203.419 Y74.938 E0.02010 ; perimeter
G1 X203.102 Y75.245 E0.01815 ; perimeter
G1 X176.542 Y97.532 E1.42835 ; perimeter
M204 S1000 ; adjust acceleration
G1 X176.426 Y97.176 F10800.000 ; move inwards before travel
G1 F8640
G1 X175.642 Y96.553 E-0.30695 ; wipe and retract
G1 X177.145 Y95.292 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.100 F10800.000 ; lift Z
G1 X160.226 Y76.553 ; move to first perimeter point
G1 Z23.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.882 Y76.143 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.16390 ; perimeter
M73 Q98 S2
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X187.800 Y57.027 E1.06121 ; perimeter
G1 X188.098 Y56.808 E0.01525 ; perimeter
G1 X188.359 Y56.665 E0.01223 ; perimeter
G1 X188.736 Y56.512 E0.01678 ; perimeter
G1 X189.071 Y56.429 E0.01422 ; perimeter
G1 X189.419 Y56.391 E0.01442 ; perimeter
G1 X189.722 Y56.397 E0.01249 ; perimeter
G1 X190.119 Y56.452 E0.01650 ; perimeter
G1 X190.396 Y56.533 E0.01192 ; perimeter
G1 X189.786 Y57.045 E0.03281 ; perimeter
G1 X189.444 Y57.026 E0.01413 ; perimeter
G1 X189.125 Y57.055 E0.01318 ; perimeter
G1 X188.802 Y57.131 E0.01368 ; perimeter
G1 X188.530 Y57.233 E0.01197 ; perimeter
G1 X188.237 Y57.388 E0.01367 ; perimeter
G1 X187.982 Y57.573 E0.01297 ; perimeter
G1 X168.261 Y74.121 E1.06052 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X160.272 Y76.514 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.177 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.323 Y76.094 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.18617 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X187.555 Y56.715 E1.05580 ; perimeter
G1 X187.885 Y56.473 E0.01686 ; perimeter
G1 X188.188 Y56.307 E0.01424 ; perimeter
G1 X188.613 Y56.134 E0.01891 ; perimeter
G1 X189.002 Y56.038 E0.01648 ; perimeter
G1 X189.401 Y55.994 E0.01655 ; perimeter
G1 X189.753 Y56.001 E0.01451 ; perimeter
G1 X190.201 Y56.064 E0.01864 ; perimeter
G1 X190.586 Y56.175 E0.01649 ; perimeter
G1 X190.952 Y56.335 E0.01645 ; perimeter
G1 X191.121 Y56.442 E0.00825 ; perimeter
G1 X189.898 Y57.468 E0.06577 ; perimeter
G1 X189.700 Y57.432 E0.00827 ; perimeter
G1 X189.455 Y57.423 E0.01012 ; perimeter
G1 X189.189 Y57.447 E0.01100 ; perimeter
G1 X188.917 Y57.511 E0.01150 ; perimeter
G1 X188.693 Y57.596 E0.00988 ; perimeter
G1 X188.447 Y57.726 E0.01148 ; perimeter
G1 X188.226 Y57.886 E0.01124 ; perimeter
G1 X168.405 Y74.517 E1.06588 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X160.223 Y77.073 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.159 Y76.712 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.323 Y76.094 E-0.30695 ; wipe and retract
G1 X160.826 Y74.833 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.100 F10800.000 ; lift Z
G1 X89.774 Y76.553 ; move to first perimeter point
G1 Z23.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.15587 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X62.018 Y57.573 E1.06052 ; perimeter
G1 X61.763 Y57.388 E0.01297 ; perimeter
G1 X61.470 Y57.233 E0.01367 ; perimeter
G1 X61.198 Y57.131 E0.01197 ; perimeter
G1 X60.875 Y57.055 E0.01368 ; perimeter
G1 X60.556 Y57.026 E0.01318 ; perimeter
G1 X60.214 Y57.045 E0.01413 ; perimeter
G1 X59.604 Y56.533 E0.03281 ; perimeter
G1 X59.886 Y56.451 E0.01209 ; perimeter
G1 X60.227 Y56.399 E0.01423 ; perimeter
G1 X60.629 Y56.396 E0.01656 ; perimeter
G1 X60.929 Y56.429 E0.01244 ; perimeter
G1 X61.269 Y56.513 E0.01442 ; perimeter
G1 X61.595 Y56.640 E0.01442 ; perimeter
G1 X61.902 Y56.808 E0.01442 ; perimeter
G1 X62.200 Y57.027 E0.01525 ; perimeter
G1 X81.934 Y73.586 E1.06121 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.118 Y76.143 E0.16390 ; perimeter
G1 X89.813 Y76.507 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.823 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.16626 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X61.774 Y57.886 E1.06588 ; perimeter
G1 X61.553 Y57.726 E0.01124 ; perimeter
G1 X61.307 Y57.596 E0.01148 ; perimeter
G1 X61.083 Y57.511 E0.00988 ; perimeter
G1 X60.811 Y57.447 E0.01150 ; perimeter
G1 X60.545 Y57.423 E0.01100 ; perimeter
G1 X60.300 Y57.432 E0.01012 ; perimeter
G1 X60.102 Y57.468 E0.00827 ; perimeter
G1 X58.879 Y56.442 E0.06577 ; perimeter
G1 X59.048 Y56.335 E0.00825 ; perimeter
G1 X59.414 Y56.175 E0.01645 ; perimeter
G1 X59.800 Y56.063 E0.01655 ; perimeter
G1 X60.196 Y56.003 E0.01649 ; perimeter
G1 X60.649 Y56.000 E0.01869 ; perimeter
G1 X60.998 Y56.038 E0.01446 ; perimeter
G1 X61.389 Y56.134 E0.01655 ; perimeter
G1 X61.763 Y56.280 E0.01655 ; perimeter
G1 X62.115 Y56.473 E0.01655 ; perimeter
G1 X62.445 Y56.715 E0.01686 ; perimeter
G1 X82.078 Y73.189 E1.05580 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X90.677 Y76.094 E0.18617 ; perimeter
G1 X89.862 Y77.065 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.543 Y76.826 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.309 Y74.987 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.100 F10800.000 ; lift Z
G1 X73.456 Y97.012 ; move to first perimeter point
G1 Z23.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.163 Y74.950 E1.41392 ; perimeter
G1 X46.876 Y74.672 E0.01648 ; perimeter
G1 X46.644 Y74.373 E0.01558 ; perimeter
G1 X46.456 Y74.045 E0.01559 ; perimeter
G1 X46.316 Y73.693 E0.01560 ; perimeter
G1 X46.228 Y73.327 E0.01552 ; perimeter
G1 X46.191 Y72.904 E0.01746 ; perimeter
G1 X46.214 Y72.529 E0.01549 ; perimeter
G1 X46.290 Y72.158 E0.01559 ; perimeter
G1 X46.418 Y71.802 E0.01560 ; perimeter
G1 X46.595 Y71.467 E0.01560 ; perimeter
G1 X46.830 Y71.143 E0.01651 ; perimeter
G1 X47.065 Y70.862 E0.01506 ; perimeter
G1 X47.475 Y71.207 E0.02205 ; perimeter
G1 X47.148 Y71.650 E0.02273 ; perimeter
G1 X46.971 Y72.030 E0.01725 ; perimeter
G1 X46.862 Y72.434 E0.01725 ; perimeter
G1 X46.825 Y72.857 E0.01749 ; perimeter
G1 X46.873 Y73.310 E0.01875 ; perimeter
G1 X46.971 Y73.673 E0.01548 ; perimeter
G1 X47.148 Y74.052 E0.01725 ; perimeter
G1 X47.388 Y74.395 E0.01725 ; perimeter
G1 X47.664 Y74.672 E0.01612 ; perimeter
G1 X73.800 Y96.602 E1.40548 ; perimeter
G1 X73.494 Y96.966 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X73.504 Y97.570 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.898 Y75.245 E1.43083 ; perimeter
G1 X46.580 Y74.937 E0.01821 ; perimeter
G1 X46.314 Y74.594 E0.01789 ; perimeter
G1 X46.098 Y74.217 E0.01791 ; perimeter
G1 X45.938 Y73.813 E0.01791 ; perimeter
G1 X45.836 Y73.391 E0.01789 ; perimeter
G1 X45.794 Y72.910 E0.01989 ; perimeter
G1 X45.820 Y72.477 E0.01786 ; perimeter
G1 X45.908 Y72.051 E0.01791 ; perimeter
G1 X46.055 Y71.642 E0.01791 ; perimeter
G1 X46.258 Y71.257 E0.01792 ; perimeter
G1 X46.518 Y70.899 E0.01825 ; perimeter
G1 X47.016 Y70.304 E0.03197 ; perimeter
G1 X48.034 Y71.158 E0.05471 ; perimeter
G1 X47.687 Y71.571 E0.02224 ; perimeter
G1 X47.492 Y71.849 E0.01398 ; perimeter
G1 X47.344 Y72.166 E0.01439 ; perimeter
G1 X47.254 Y72.503 E0.01439 ; perimeter
G1 X47.223 Y72.853 E0.01448 ; perimeter
G1 X47.264 Y73.237 E0.01590 ; perimeter
G1 X47.344 Y73.537 E0.01278 ; perimeter
G1 X47.492 Y73.853 E0.01439 ; perimeter
G1 X47.692 Y74.139 E0.01439 ; perimeter
G1 X47.932 Y74.379 E0.01398 ; perimeter
G1 X74.358 Y96.553 E1.42109 ; perimeter
G1 X73.543 Y97.524 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X73.201 Y97.309 F10800.000 ; move inwards before travel
G1 F8640
G1 X71.018 Y95.413 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.100 F10800.000 ; lift Z
G1 X176.259 Y135.158 ; move to first perimeter point
G1 Z23.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X175.915 Y134.748 E0.02205 ; perimeter
G1 X202.050 Y112.818 E1.40548 ; perimeter
G1 X202.327 Y112.541 E0.01613 ; perimeter
G1 X202.567 Y112.198 E0.01725 ; perimeter
G1 X202.744 Y111.819 E0.01725 ; perimeter
G1 X202.853 Y111.414 E0.01725 ; perimeter
G1 X202.889 Y110.997 E0.01725 ; perimeter
G1 X202.853 Y110.580 E0.01725 ; perimeter
G1 X202.744 Y110.176 E0.01725 ; perimeter
G1 X202.567 Y109.796 E0.01725 ; perimeter
G1 X202.239 Y109.353 E0.02273 ; perimeter
G1 X202.650 Y109.009 E0.02205 ; perimeter
G1 X202.885 Y109.289 E0.01506 ; perimeter
G1 X203.120 Y109.613 E0.01651 ; perimeter
G1 X203.295 Y109.945 E0.01548 ; perimeter
G1 X203.435 Y110.347 E0.01750 ; perimeter
G1 X203.500 Y110.674 E0.01375 ; perimeter
G1 X203.523 Y111.051 E0.01555 ; perimeter
G1 X203.486 Y111.473 E0.01746 ; perimeter
G1 X203.398 Y111.839 E0.01552 ; perimeter
G1 X203.258 Y112.192 E0.01564 ; perimeter
G1 X203.097 Y112.477 E0.01351 ; perimeter
G1 X202.836 Y112.821 E0.01776 ; perimeter
G1 X202.551 Y113.096 E0.01632 ; perimeter
G1 X176.305 Y135.119 E1.41145 ; perimeter
M73 P99 R1
M204 S1000 ; adjust acceleration
G1 X176.210 Y135.716 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X175.357 Y134.699 E0.05471 ; perimeter
G1 X201.782 Y112.525 E1.42109 ; perimeter
G1 X202.022 Y112.285 E0.01398 ; perimeter
G1 X202.223 Y111.999 E0.01439 ; perimeter
G1 X202.370 Y111.683 E0.01439 ; perimeter
G1 X202.461 Y111.345 E0.01439 ; perimeter
G1 X202.491 Y110.997 E0.01439 ; perimeter
G1 X202.461 Y110.649 E0.01439 ; perimeter
G1 X202.370 Y110.312 E0.01439 ; perimeter
G1 X202.223 Y109.995 E0.01439 ; perimeter
G1 X202.028 Y109.717 E0.01398 ; perimeter
G1 X201.681 Y109.304 E0.02224 ; perimeter
G1 X202.698 Y108.450 E0.05471 ; perimeter
G1 X203.197 Y109.045 E0.03197 ; perimeter
G1 X203.457 Y109.403 E0.01825 ; perimeter
G1 X203.660 Y109.787 E0.01787 ; perimeter
G1 X203.818 Y110.242 E0.01985 ; perimeter
G1 X203.894 Y110.623 E0.01598 ; perimeter
G1 X203.921 Y111.056 E0.01788 ; perimeter
G1 X203.879 Y111.537 E0.01989 ; perimeter
G1 X203.777 Y111.959 E0.01789 ; perimeter
G1 X203.617 Y112.364 E0.01793 ; perimeter
G1 X203.428 Y112.696 E0.01572 ; perimeter
G1 X203.134 Y113.085 E0.02010 ; perimeter
G1 X202.817 Y113.391 E0.01815 ; perimeter
G1 X176.256 Y135.678 E1.42835 ; perimeter
M204 S1000 ; adjust acceleration
G1 X176.141 Y135.322 F10800.000 ; move inwards before travel
G1 F8640
G1 X175.357 Y134.699 E-0.30695 ; wipe and retract
G1 X176.860 Y133.438 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.100 F10800.000 ; lift Z
G1 X159.940 Y114.699 ; move to first perimeter point
G1 Z23.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.596 Y114.289 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.16390 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X187.515 Y95.173 E1.06121 ; perimeter
G1 X187.813 Y94.954 E0.01525 ; perimeter
G1 X188.073 Y94.811 E0.01223 ; perimeter
G1 X188.451 Y94.658 E0.01678 ; perimeter
G1 X188.786 Y94.576 E0.01422 ; perimeter
G1 X189.134 Y94.537 E0.01442 ; perimeter
G1 X189.437 Y94.543 E0.01249 ; perimeter
G1 X189.833 Y94.598 E0.01650 ; perimeter
G1 X190.111 Y94.679 E0.01192 ; perimeter
G1 X189.501 Y95.191 E0.03281 ; perimeter
G1 X189.159 Y95.172 E0.01413 ; perimeter
G1 X188.840 Y95.201 E0.01318 ; perimeter
G1 X188.517 Y95.277 E0.01368 ; perimeter
G1 X188.245 Y95.380 E0.01197 ; perimeter
G1 X187.951 Y95.535 E0.01367 ; perimeter
G1 X187.696 Y95.719 E0.01297 ; perimeter
G1 X167.976 Y112.267 E1.06052 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.986 Y114.661 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.892 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.038 Y114.240 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.18617 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X187.270 Y94.861 E1.05580 ; perimeter
G1 X187.600 Y94.619 E0.01686 ; perimeter
G1 X187.903 Y94.453 E0.01424 ; perimeter
G1 X188.328 Y94.280 E0.01891 ; perimeter
G1 X188.716 Y94.184 E0.01648 ; perimeter
G1 X189.116 Y94.140 E0.01655 ; perimeter
G1 X189.468 Y94.148 E0.01451 ; perimeter
G1 X189.916 Y94.210 E0.01864 ; perimeter
G1 X190.301 Y94.321 E0.01649 ; perimeter
G1 X190.666 Y94.481 E0.01645 ; perimeter
G1 X190.836 Y94.588 E0.00825 ; perimeter
G1 X189.613 Y95.615 E0.06577 ; perimeter
G1 X189.415 Y95.578 E0.00827 ; perimeter
G1 X189.170 Y95.569 E0.01012 ; perimeter
G1 X188.904 Y95.594 E0.01100 ; perimeter
G1 X188.632 Y95.657 E0.01150 ; perimeter
G1 X188.408 Y95.742 E0.00988 ; perimeter
G1 X188.161 Y95.872 E0.01148 ; perimeter
G1 X187.940 Y96.032 E0.01124 ; perimeter
G1 X168.120 Y112.663 E1.06588 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X159.938 Y115.219 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.874 Y114.858 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.038 Y114.240 E-0.30695 ; wipe and retract
G1 X160.541 Y112.979 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.100 F10800.000 ; lift Z
G1 X89.489 Y114.699 ; move to first perimeter point
G1 Z23.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.15587 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X61.733 Y95.720 E1.06052 ; perimeter
G1 X61.478 Y95.535 E0.01297 ; perimeter
G1 X61.185 Y95.380 E0.01367 ; perimeter
G1 X60.913 Y95.277 E0.01197 ; perimeter
G1 X60.590 Y95.201 E0.01368 ; perimeter
G1 X60.271 Y95.172 E0.01318 ; perimeter
G1 X59.928 Y95.191 E0.01413 ; perimeter
G1 X59.318 Y94.679 E0.03281 ; perimeter
G1 X59.600 Y94.597 E0.01209 ; perimeter
G1 X59.942 Y94.545 E0.01423 ; perimeter
G1 X60.344 Y94.542 E0.01656 ; perimeter
G1 X60.644 Y94.576 E0.01244 ; perimeter
G1 X60.984 Y94.659 E0.01442 ; perimeter
G1 X61.310 Y94.786 E0.01442 ; perimeter
G1 X61.617 Y94.954 E0.01442 ; perimeter
G1 X61.915 Y95.173 E0.01525 ; perimeter
G1 X81.649 Y111.732 E1.06121 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X89.833 Y114.289 E0.16390 ; perimeter
G1 X89.528 Y114.653 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.538 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.16626 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X61.489 Y96.032 E1.06588 ; perimeter
G1 X61.268 Y95.872 E0.01124 ; perimeter
G1 X61.022 Y95.742 E0.01148 ; perimeter
G1 X60.797 Y95.657 E0.00988 ; perimeter
G1 X60.526 Y95.594 E0.01150 ; perimeter
G1 X60.260 Y95.569 E0.01100 ; perimeter
G1 X60.014 Y95.578 E0.01012 ; perimeter
G1 X59.817 Y95.615 E0.00827 ; perimeter
G1 X58.594 Y94.588 E0.06577 ; perimeter
G1 X58.763 Y94.481 E0.00825 ; perimeter
G1 X59.129 Y94.321 E0.01645 ; perimeter
G1 X59.515 Y94.209 E0.01655 ; perimeter
G1 X59.911 Y94.149 E0.01649 ; perimeter
G1 X60.364 Y94.146 E0.01869 ; perimeter
G1 X60.713 Y94.184 E0.01446 ; perimeter
G1 X61.103 Y94.280 E0.01655 ; perimeter
G1 X61.478 Y94.426 E0.01655 ; perimeter
G1 X61.830 Y94.619 E0.01655 ; perimeter
G1 X62.160 Y94.861 E0.01686 ; perimeter
G1 X81.793 Y111.335 E1.05580 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X90.392 Y114.240 E0.18617 ; perimeter
G1 X89.577 Y115.212 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.257 Y114.972 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.024 Y113.134 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.100 F10800.000 ; lift Z
G1 X73.170 Y135.158 ; move to first perimeter point
G1 Z23.500 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X46.878 Y113.096 E1.41392 ; perimeter
G1 X46.591 Y112.818 E0.01648 ; perimeter
G1 X46.359 Y112.520 E0.01558 ; perimeter
G1 X46.171 Y112.191 E0.01559 ; perimeter
G1 X46.031 Y111.839 E0.01560 ; perimeter
G1 X45.943 Y111.473 E0.01552 ; perimeter
G1 X45.906 Y111.051 E0.01746 ; perimeter
G1 X45.929 Y110.675 E0.01549 ; perimeter
G1 X46.005 Y110.305 E0.01559 ; perimeter
G1 X46.133 Y109.948 E0.01560 ; perimeter
G1 X46.310 Y109.613 E0.01560 ; perimeter
G1 X46.545 Y109.289 E0.01651 ; perimeter
G1 X46.780 Y109.009 E0.01506 ; perimeter
G1 X47.190 Y109.353 E0.02205 ; perimeter
G1 X46.862 Y109.796 E0.02273 ; perimeter
G1 X46.685 Y110.176 E0.01725 ; perimeter
G1 X46.577 Y110.580 E0.01725 ; perimeter
G1 X46.540 Y111.003 E0.01749 ; perimeter
G1 X46.588 Y111.456 E0.01875 ; perimeter
G1 X46.685 Y111.819 E0.01548 ; perimeter
G1 X46.862 Y112.198 E0.01725 ; perimeter
G1 X47.102 Y112.541 E0.01725 ; perimeter
G1 X47.379 Y112.818 E0.01612 ; perimeter
G1 X73.514 Y134.748 E1.40548 ; perimeter
G1 X73.209 Y135.112 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X73.219 Y135.716 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.613 Y113.391 E1.43083 ; perimeter
G1 X46.295 Y113.084 E0.01821 ; perimeter
G1 X46.028 Y112.741 E0.01789 ; perimeter
G1 X45.813 Y112.363 E0.01791 ; perimeter
G1 X45.652 Y111.959 E0.01791 ; perimeter
G1 X45.551 Y111.537 E0.01789 ; perimeter
G1 X45.509 Y111.056 E0.01989 ; perimeter
G1 X45.535 Y110.623 E0.01786 ; perimeter
G1 X45.623 Y110.197 E0.01791 ; perimeter
G1 X45.769 Y109.788 E0.01791 ; perimeter
G1 X45.972 Y109.403 E0.01792 ; perimeter
G1 X46.232 Y109.045 E0.01825 ; perimeter
G1 X46.731 Y108.450 E0.03197 ; perimeter
G1 X47.749 Y109.304 E0.05471 ; perimeter
G1 X47.402 Y109.717 E0.02224 ; perimeter
G1 X47.207 Y109.995 E0.01398 ; perimeter
G1 X47.059 Y110.312 E0.01439 ; perimeter
G1 X46.969 Y110.649 E0.01439 ; perimeter
G1 X46.938 Y110.999 E0.01448 ; perimeter
G1 X46.979 Y111.383 E0.01590 ; perimeter
G1 X47.059 Y111.683 E0.01278 ; perimeter
G1 X47.207 Y111.999 E0.01439 ; perimeter
G1 X47.407 Y112.285 E0.01439 ; perimeter
G1 X47.647 Y112.525 E0.01398 ; perimeter
G1 X74.073 Y134.699 E1.42109 ; perimeter
G1 X73.258 Y135.670 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X72.916 Y135.455 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;23.75


G1 F8640
G1 X70.733 Y133.559 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.100 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;23.75
G1 X176.736 Y96.851 ; move to first perimeter point
G1 Z23.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X176.392 Y96.441 E0.02205 ; perimeter
G1 X202.336 Y74.672 E1.39518 ; perimeter
G1 X202.612 Y74.395 E0.01613 ; perimeter
G1 X202.852 Y74.052 E0.01725 ; perimeter
G1 X203.029 Y73.673 E0.01725 ; perimeter
G1 X203.138 Y73.268 E0.01725 ; perimeter
G1 X203.174 Y72.851 E0.01725 ; perimeter
G1 X203.138 Y72.434 E0.01725 ; perimeter
G1 X203.029 Y72.030 E0.01725 ; perimeter
G1 X202.852 Y71.650 E0.01725 ; perimeter
G1 X202.679 Y71.403 E0.01243 ; perimeter
G1 X203.095 Y71.054 E0.02237 ; perimeter
G1 X203.406 Y71.469 E0.02134 ; perimeter
G1 X203.583 Y71.804 E0.01561 ; perimeter
G1 X203.716 Y72.185 E0.01663 ; perimeter
G1 X203.787 Y72.536 E0.01475 ; perimeter
G1 X203.809 Y72.915 E0.01565 ; perimeter
G1 X203.774 Y73.316 E0.01660 ; perimeter
G1 X203.686 Y73.685 E0.01563 ; perimeter
G1 X203.546 Y74.040 E0.01570 ; perimeter
G1 X203.371 Y74.349 E0.01463 ; perimeter
G1 X203.124 Y74.672 E0.01676 ; perimeter
G1 X202.837 Y74.950 E0.01649 ; perimeter
G1 X176.782 Y96.813 E1.40115 ; perimeter
M204 S1000 ; adjust acceleration
G1 X176.687 Y97.410 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X175.834 Y96.392 E0.05471 ; perimeter
G1 X202.068 Y74.379 E1.41080 ; perimeter
G1 X202.308 Y74.139 E0.01398 ; perimeter
G1 X202.508 Y73.853 E0.01439 ; perimeter
G1 X202.656 Y73.537 E0.01439 ; perimeter
G1 X202.746 Y73.199 E0.01439 ; perimeter
G1 X202.776 Y72.851 E0.01439 ; perimeter
G1 X202.746 Y72.503 E0.01439 ; perimeter
G1 X202.656 Y72.166 E0.01439 ; perimeter
G1 X202.508 Y71.849 E0.01439 ; perimeter
G1 X202.313 Y71.571 E0.01398 ; perimeter
G1 X202.127 Y71.349 E0.01194 ; perimeter
G1 X203.144 Y70.496 E0.05471 ; perimeter
G1 X203.482 Y70.899 E0.02167 ; perimeter
G1 X203.743 Y71.259 E0.01833 ; perimeter
G1 X203.947 Y71.645 E0.01798 ; perimeter
G1 X204.099 Y72.079 E0.01897 ; perimeter
G1 X204.181 Y72.485 E0.01703 ; perimeter
G1 X204.206 Y72.920 E0.01798 ; perimeter
G1 X204.166 Y73.380 E0.01899 ; perimeter
G1 X204.065 Y73.804 E0.01799 ; perimeter
G1 X203.905 Y74.211 E0.01801 ; perimeter
G1 X203.703 Y74.568 E0.01690 ; perimeter
G1 X203.421 Y74.936 E0.01909 ; perimeter
G1 X203.102 Y75.245 E0.01828 ; perimeter
G1 X176.733 Y97.371 E1.41805 ; perimeter
M204 S1000 ; adjust acceleration
G1 X176.618 Y97.016 F10800.000 ; move inwards before travel
G1 F8640
G1 X175.834 Y96.392 E-0.30695 ; wipe and retract
G1 X177.337 Y95.131 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.350 F10800.000 ; lift Z
G1 X160.226 Y76.553 ; move to first perimeter point
G1 Z23.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.882 Y76.143 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.16390 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X187.800 Y57.027 E1.06121 ; perimeter
G1 X188.098 Y56.808 E0.01525 ; perimeter
G1 X188.382 Y56.653 E0.01333 ; perimeter
G1 X188.733 Y56.512 E0.01560 ; perimeter
G1 X189.071 Y56.429 E0.01431 ; perimeter
G1 X189.419 Y56.391 E0.01442 ; perimeter
G1 X189.745 Y56.398 E0.01345 ; perimeter
G1 X190.106 Y56.450 E0.01502 ; perimeter
G1 X189.417 Y57.028 E0.03704 ; perimeter
G1 X189.128 Y57.055 E0.01197 ; perimeter
G1 X188.809 Y57.129 E0.01350 ; perimeter
G1 X188.521 Y57.237 E0.01267 ; perimeter
G1 X188.231 Y57.392 E0.01352 ; perimeter
G1 X187.981 Y57.574 E0.01274 ; perimeter
G1 X168.261 Y74.121 E1.06050 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X160.272 Y76.514 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.177 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.323 Y76.094 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.18617 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X187.555 Y56.715 E1.05580 ; perimeter
G1 X187.885 Y56.473 E0.01685 ; perimeter
G1 X188.212 Y56.293 E0.01540 ; perimeter
G1 X188.612 Y56.134 E0.01773 ; perimeter
G1 X189.001 Y56.038 E0.01651 ; perimeter
G1 X189.401 Y55.994 E0.01655 ; perimeter
G1 X189.778 Y56.002 E0.01553 ; perimeter
G1 X190.200 Y56.063 E0.01759 ; perimeter
G1 X190.586 Y56.175 E0.01652 ; perimeter
G1 X190.891 Y56.309 E0.01374 ; perimeter
G1 X189.559 Y57.427 E0.07166 ; perimeter
G1 X189.191 Y57.447 E0.01516 ; perimeter
G1 X188.924 Y57.509 E0.01132 ; perimeter
G1 X188.685 Y57.599 E0.01052 ; perimeter
G1 X188.442 Y57.728 E0.01132 ; perimeter
G1 X188.226 Y57.886 E0.01104 ; perimeter
G1 X168.405 Y74.517 E1.06587 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X160.223 Y77.073 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.159 Y76.712 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.323 Y76.094 E-0.30695 ; wipe and retract
G1 X160.826 Y74.833 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.350 F10800.000 ; lift Z
G1 X89.774 Y76.553 ; move to first perimeter point
G1 Z23.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.15587 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X62.019 Y57.574 E1.06050 ; perimeter
G1 X61.769 Y57.392 E0.01274 ; perimeter
G1 X61.479 Y57.237 E0.01352 ; perimeter
G1 X61.191 Y57.129 E0.01267 ; perimeter
G1 X60.872 Y57.055 E0.01350 ; perimeter
G1 X60.583 Y57.028 E0.01197 ; perimeter
G1 X59.894 Y56.450 E0.03706 ; perimeter
G1 X60.229 Y56.399 E0.01399 ; perimeter
G1 X60.605 Y56.394 E0.01549 ; perimeter
G1 X60.929 Y56.429 E0.01343 ; perimeter
G1 X61.269 Y56.513 E0.01441 ; perimeter
G1 X61.595 Y56.640 E0.01441 ; perimeter
G1 X61.902 Y56.808 E0.01441 ; perimeter
G1 X62.200 Y57.027 E0.01525 ; perimeter
G1 X81.934 Y73.586 E1.06121 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.118 Y76.143 E0.16390 ; perimeter
G1 X89.813 Y76.507 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.823 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.16626 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X61.774 Y57.886 E1.06587 ; perimeter
G1 X61.558 Y57.728 E0.01104 ; perimeter
G1 X61.315 Y57.599 E0.01132 ; perimeter
G1 X61.076 Y57.509 E0.01052 ; perimeter
G1 X60.809 Y57.447 E0.01132 ; perimeter
G1 X60.441 Y57.427 E0.01516 ; perimeter
G1 X59.109 Y56.309 E0.07166 ; perimeter
G1 X59.414 Y56.175 E0.01374 ; perimeter
G1 X59.800 Y56.063 E0.01655 ; perimeter
G1 X60.197 Y56.003 E0.01652 ; perimeter
G1 X60.624 Y55.997 E0.01762 ; perimeter
G1 X60.999 Y56.038 E0.01550 ; perimeter
G1 X61.389 Y56.134 E0.01655 ; perimeter
G1 X61.763 Y56.280 E0.01655 ; perimeter
G1 X62.115 Y56.473 E0.01655 ; perimeter
G1 X62.445 Y56.715 E0.01685 ; perimeter
G1 X82.078 Y73.189 E1.05580 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X90.677 Y76.094 E0.18617 ; perimeter
G1 X89.862 Y77.065 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.543 Y76.826 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.309 Y74.987 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.350 F10800.000 ; lift Z
G1 X73.264 Y96.851 ; move to first perimeter point
G1 Z23.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.163 Y74.950 E1.40362 ; perimeter
G1 X46.874 Y74.670 E0.01657 ; perimeter
G1 X46.641 Y74.370 E0.01566 ; perimeter
G1 X46.453 Y74.039 E0.01567 ; perimeter
G1 X46.314 Y73.685 E0.01567 ; perimeter
G1 X46.226 Y73.316 E0.01563 ; perimeter
G1 X46.191 Y72.915 E0.01660 ; perimeter
G1 X46.213 Y72.536 E0.01562 ; perimeter
G1 X46.289 Y72.163 E0.01567 ; perimeter
G1 X46.417 Y71.805 E0.01567 ; perimeter
G1 X46.594 Y71.469 E0.01567 ; perimeter
G1 X46.905 Y71.054 E0.02134 ; perimeter
G1 X47.321 Y71.403 E0.02237 ; perimeter
G1 X47.148 Y71.650 E0.01244 ; perimeter
G1 X46.971 Y72.030 E0.01725 ; perimeter
G1 X46.862 Y72.434 E0.01725 ; perimeter
G1 X46.826 Y72.851 E0.01725 ; perimeter
G1 X46.862 Y73.268 E0.01725 ; perimeter
G1 X46.971 Y73.673 E0.01725 ; perimeter
G1 X47.148 Y74.052 E0.01725 ; perimeter
G1 X47.388 Y74.395 E0.01725 ; perimeter
G1 X47.664 Y74.672 E0.01612 ; perimeter
G1 X73.608 Y96.441 E1.39518 ; perimeter
G1 X73.303 Y96.805 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X73.313 Y97.410 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.898 Y75.245 E1.42053 ; perimeter
G1 X46.579 Y74.936 E0.01831 ; perimeter
G1 X46.311 Y74.591 E0.01799 ; perimeter
G1 X46.095 Y74.211 E0.01799 ; perimeter
G1 X45.935 Y73.804 E0.01800 ; perimeter
G1 X45.834 Y73.380 E0.01799 ; perimeter
G1 X45.794 Y72.920 E0.01899 ; perimeter
G1 X45.819 Y72.485 E0.01797 ; perimeter
G1 X45.906 Y72.057 E0.01799 ; perimeter
G1 X46.053 Y71.645 E0.01800 ; perimeter
G1 X46.257 Y71.259 E0.01800 ; perimeter
G1 X46.518 Y70.899 E0.01833 ; perimeter
G1 X46.856 Y70.496 E0.02167 ; perimeter
G1 X47.873 Y71.349 E0.05471 ; perimeter
G1 X47.687 Y71.571 E0.01194 ; perimeter
G1 X47.492 Y71.849 E0.01398 ; perimeter
G1 X47.344 Y72.166 E0.01439 ; perimeter
G1 X47.254 Y72.503 E0.01439 ; perimeter
G1 X47.224 Y72.851 E0.01439 ; perimeter
G1 X47.254 Y73.199 E0.01439 ; perimeter
G1 X47.344 Y73.537 E0.01439 ; perimeter
G1 X47.492 Y73.853 E0.01439 ; perimeter
G1 X47.692 Y74.139 E0.01439 ; perimeter
G1 X47.932 Y74.379 E0.01398 ; perimeter
G1 X74.166 Y96.392 E1.41080 ; perimeter
G1 X73.351 Y97.364 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X73.010 Y97.149 F10800.000 ; move inwards before travel
G1 F8640
G1 X70.826 Y95.252 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.350 F10800.000 ; lift Z
G1 X176.451 Y134.997 ; move to first perimeter point
G1 Z23.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X176.107 Y134.587 E0.02205 ; perimeter
G1 X202.050 Y112.818 E1.39518 ; perimeter
G1 X202.327 Y112.541 E0.01613 ; perimeter
G1 X202.567 Y112.198 E0.01725 ; perimeter
G1 X202.744 Y111.819 E0.01725 ; perimeter
G1 X202.853 Y111.414 E0.01725 ; perimeter
G1 X202.889 Y110.997 E0.01725 ; perimeter
G1 X202.853 Y110.580 E0.01725 ; perimeter
G1 X202.744 Y110.176 E0.01725 ; perimeter
G1 X202.567 Y109.796 E0.01725 ; perimeter
G1 X202.394 Y109.549 E0.01243 ; perimeter
G1 X202.810 Y109.200 E0.02237 ; perimeter
G1 X203.121 Y109.615 E0.02134 ; perimeter
G1 X203.297 Y109.950 E0.01561 ; perimeter
G1 X203.431 Y110.331 E0.01663 ; perimeter
G1 X203.502 Y110.682 E0.01475 ; perimeter
G1 X203.524 Y111.061 E0.01565 ; perimeter
G1 X203.489 Y111.462 E0.01660 ; perimeter
G1 X203.401 Y111.832 E0.01563 ; perimeter
G1 X203.261 Y112.186 E0.01570 ; perimeter
G1 X203.086 Y112.495 E0.01463 ; perimeter
G1 X202.839 Y112.818 E0.01676 ; perimeter
G1 X202.551 Y113.096 E0.01649 ; perimeter
G1 X176.497 Y134.959 E1.40115 ; perimeter
M204 S1000 ; adjust acceleration
G1 X176.402 Y135.556 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X175.548 Y134.538 E0.05471 ; perimeter
G1 X201.782 Y112.525 E1.41080 ; perimeter
G1 X202.022 Y112.285 E0.01398 ; perimeter
G1 X202.223 Y111.999 E0.01439 ; perimeter
G1 X202.370 Y111.683 E0.01439 ; perimeter
G1 X202.461 Y111.345 E0.01439 ; perimeter
G1 X202.491 Y110.997 E0.01439 ; perimeter
G1 X202.461 Y110.649 E0.01439 ; perimeter
G1 X202.370 Y110.312 E0.01439 ; perimeter
G1 X202.223 Y109.995 E0.01439 ; perimeter
G1 X202.028 Y109.717 E0.01398 ; perimeter
G1 X201.842 Y109.495 E0.01194 ; perimeter
G1 X202.859 Y108.642 E0.05471 ; perimeter
G1 X203.197 Y109.045 E0.02167 ; perimeter
G1 X203.458 Y109.405 E0.01833 ; perimeter
G1 X203.662 Y109.791 E0.01798 ; perimeter
G1 X203.814 Y110.226 E0.01897 ; perimeter
G1 X203.896 Y110.631 E0.01703 ; perimeter
G1 X203.921 Y111.067 E0.01798 ; perimeter
G1 X203.881 Y111.526 E0.01899 ; perimeter
G1 X203.780 Y111.951 E0.01799 ; perimeter
G1 X203.620 Y112.357 E0.01801 ; perimeter
G1 X203.418 Y112.714 E0.01690 ; perimeter
G1 X203.136 Y113.082 E0.01909 ; perimeter
G1 X202.817 Y113.391 E0.01828 ; perimeter
G1 X176.448 Y135.517 E1.41805 ; perimeter
M204 S1000 ; adjust acceleration
G1 X176.332 Y135.162 F10800.000 ; move inwards before travel
G1 F8640
G1 X175.548 Y134.538 E-0.30695 ; wipe and retract
G1 X177.051 Y133.277 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.350 F10800.000 ; lift Z
G1 X159.940 Y114.699 ; move to first perimeter point
G1 Z23.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.596 Y114.289 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.16390 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X187.515 Y95.173 E1.06121 ; perimeter
G1 X187.813 Y94.954 E0.01525 ; perimeter
G1 X188.097 Y94.799 E0.01333 ; perimeter
G1 X188.448 Y94.658 E0.01560 ; perimeter
G1 X188.786 Y94.576 E0.01431 ; perimeter
G1 X189.133 Y94.537 E0.01442 ; perimeter
G1 X189.460 Y94.544 E0.01345 ; perimeter
G1 X189.821 Y94.596 E0.01502 ; perimeter
G1 X189.132 Y95.174 E0.03704 ; perimeter
G1 X188.843 Y95.201 E0.01197 ; perimeter
G1 X188.523 Y95.275 E0.01350 ; perimeter
G1 X188.236 Y95.383 E0.01267 ; perimeter
G1 X187.946 Y95.538 E0.01352 ; perimeter
G1 X187.696 Y95.720 E0.01274 ; perimeter
G1 X167.976 Y112.267 E1.06050 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.986 Y114.661 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.892 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.038 Y114.240 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.18617 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X187.270 Y94.861 E1.05580 ; perimeter
G1 X187.600 Y94.619 E0.01685 ; perimeter
G1 X187.927 Y94.440 E0.01540 ; perimeter
G1 X188.327 Y94.280 E0.01773 ; perimeter
G1 X188.716 Y94.184 E0.01651 ; perimeter
G1 X189.116 Y94.140 E0.01655 ; perimeter
G1 X189.493 Y94.148 E0.01553 ; perimeter
G1 X189.915 Y94.209 E0.01759 ; perimeter
G1 X190.300 Y94.321 E0.01652 ; perimeter
G1 X190.606 Y94.455 E0.01374 ; perimeter
G1 X189.273 Y95.573 E0.07166 ; perimeter
G1 X188.906 Y95.593 E0.01516 ; perimeter
G1 X188.638 Y95.655 E0.01132 ; perimeter
G1 X188.399 Y95.745 E0.01052 ; perimeter
G1 X188.157 Y95.875 E0.01132 ; perimeter
G1 X187.940 Y96.032 E0.01104 ; perimeter
G1 X168.120 Y112.663 E1.06587 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X159.938 Y115.219 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.874 Y114.858 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.038 Y114.240 E-0.30695 ; wipe and retract
G1 X160.541 Y112.979 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.350 F10800.000 ; lift Z
G1 X89.489 Y114.699 ; move to first perimeter point
G1 Z23.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.15587 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X61.734 Y95.720 E1.06050 ; perimeter
G1 X61.484 Y95.538 E0.01274 ; perimeter
G1 X61.194 Y95.383 E0.01352 ; perimeter
G1 X60.906 Y95.275 E0.01267 ; perimeter
G1 X60.587 Y95.201 E0.01350 ; perimeter
G1 X60.298 Y95.174 E0.01197 ; perimeter
G1 X59.608 Y94.596 E0.03706 ; perimeter
G1 X59.944 Y94.545 E0.01399 ; perimeter
G1 X60.320 Y94.540 E0.01549 ; perimeter
G1 X60.644 Y94.576 E0.01343 ; perimeter
G1 X60.984 Y94.659 E0.01441 ; perimeter
G1 X61.310 Y94.786 E0.01441 ; perimeter
G1 X61.617 Y94.954 E0.01441 ; perimeter
G1 X61.915 Y95.173 E0.01525 ; perimeter
G1 X81.649 Y111.732 E1.06121 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X89.833 Y114.289 E0.16390 ; perimeter
G1 X89.528 Y114.653 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.538 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.16626 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X61.489 Y96.032 E1.06587 ; perimeter
G1 X61.273 Y95.875 E0.01104 ; perimeter
G1 X61.030 Y95.745 E0.01132 ; perimeter
G1 X60.791 Y95.655 E0.01052 ; perimeter
G1 X60.524 Y95.593 E0.01132 ; perimeter
G1 X60.156 Y95.573 E0.01516 ; perimeter
G1 X58.824 Y94.455 E0.07166 ; perimeter
G1 X59.129 Y94.321 E0.01374 ; perimeter
G1 X59.515 Y94.209 E0.01655 ; perimeter
G1 X59.912 Y94.149 E0.01652 ; perimeter
G1 X60.339 Y94.143 E0.01762 ; perimeter
G1 X60.713 Y94.184 E0.01550 ; perimeter
G1 X61.104 Y94.280 E0.01655 ; perimeter
G1 X61.478 Y94.426 E0.01655 ; perimeter
G1 X61.830 Y94.619 E0.01655 ; perimeter
G1 X62.160 Y94.861 E0.01685 ; perimeter
G1 X81.793 Y111.335 E1.05580 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X90.392 Y114.240 E0.18617 ; perimeter
G1 X89.577 Y115.212 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.257 Y114.972 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.024 Y113.134 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.350 F10800.000 ; lift Z
G1 X72.979 Y134.997 ; move to first perimeter point
G1 Z23.750 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X46.878 Y113.096 E1.40362 ; perimeter
G1 X46.589 Y112.817 E0.01657 ; perimeter
G1 X46.356 Y112.516 E0.01566 ; perimeter
G1 X46.168 Y112.186 E0.01567 ; perimeter
G1 X46.029 Y111.832 E0.01567 ; perimeter
G1 X45.941 Y111.462 E0.01563 ; perimeter
G1 X45.906 Y111.061 E0.01660 ; perimeter
G1 X45.928 Y110.682 E0.01562 ; perimeter
G1 X46.004 Y110.310 E0.01567 ; perimeter
G1 X46.132 Y109.951 E0.01567 ; perimeter
G1 X46.309 Y109.615 E0.01567 ; perimeter
G1 X46.619 Y109.200 E0.02134 ; perimeter
G1 X47.035 Y109.549 E0.02237 ; perimeter
G1 X46.862 Y109.796 E0.01244 ; perimeter
G1 X46.685 Y110.176 E0.01725 ; perimeter
G1 X46.577 Y110.580 E0.01725 ; perimeter
G1 X46.541 Y110.997 E0.01725 ; perimeter
G1 X46.577 Y111.414 E0.01725 ; perimeter
G1 X46.685 Y111.819 E0.01725 ; perimeter
G1 X46.862 Y112.198 E0.01725 ; perimeter
G1 X47.102 Y112.541 E0.01725 ; perimeter
G1 X47.379 Y112.818 E0.01612 ; perimeter
G1 X73.323 Y134.587 E1.39518 ; perimeter
G1 X73.017 Y134.951 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X73.028 Y135.556 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.613 Y113.391 E1.42053 ; perimeter
G1 X46.293 Y113.082 E0.01831 ; perimeter
G1 X46.026 Y112.737 E0.01799 ; perimeter
G1 X45.810 Y112.357 E0.01799 ; perimeter
G1 X45.650 Y111.951 E0.01800 ; perimeter
G1 X45.549 Y111.526 E0.01799 ; perimeter
G1 X45.509 Y111.067 E0.01899 ; perimeter
G1 X45.534 Y110.631 E0.01797 ; perimeter
G1 X45.621 Y110.203 E0.01799 ; perimeter
G1 X45.768 Y109.792 E0.01800 ; perimeter
G1 X45.971 Y109.405 E0.01800 ; perimeter
G1 X46.232 Y109.045 E0.01833 ; perimeter
G1 X46.571 Y108.642 E0.02167 ; perimeter
G1 X47.588 Y109.495 E0.05471 ; perimeter
G1 X47.402 Y109.717 E0.01194 ; perimeter
G1 X47.207 Y109.995 E0.01398 ; perimeter
G1 X47.059 Y110.312 E0.01439 ; perimeter
G1 X46.969 Y110.649 E0.01439 ; perimeter
G1 X46.938 Y110.997 E0.01439 ; perimeter
G1 X46.969 Y111.345 E0.01439 ; perimeter
G1 X47.059 Y111.683 E0.01439 ; perimeter
G1 X47.207 Y111.999 E0.01439 ; perimeter
G1 X47.407 Y112.285 E0.01439 ; perimeter
G1 X47.647 Y112.525 E0.01398 ; perimeter
G1 X73.881 Y134.538 E1.41080 ; perimeter
G1 X73.066 Y135.510 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X72.725 Y135.295 F10800.000 ; move inwards before travel
;BEFORE_LAYER_CHANGE
G92 E0.0
;24


G1 F8640
G1 X70.541 Y133.398 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.350 F10800.000 ; lift Z
;AFTER_LAYER_CHANGE
;24
G1 X176.927 Y96.690 ; move to first perimeter point
G1 Z24.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X176.583 Y96.280 E0.02205 ; perimeter
G1 X202.336 Y74.672 E1.38488 ; perimeter
G1 X202.612 Y74.395 E0.01612 ; perimeter
G1 X202.852 Y74.052 E0.01725 ; perimeter
G1 X203.029 Y73.673 E0.01725 ; perimeter
G1 X203.138 Y73.268 E0.01725 ; perimeter
G1 X203.174 Y72.851 E0.01725 ; perimeter
G1 X203.138 Y72.434 E0.01725 ; perimeter
G1 X203.029 Y72.030 E0.01725 ; perimeter
G1 X202.824 Y71.609 E0.01931 ; perimeter
G1 X203.249 Y71.252 E0.02285 ; perimeter
G1 X203.407 Y71.470 E0.01108 ; perimeter
G1 X203.585 Y71.808 E0.01575 ; perimeter
G1 X203.713 Y72.169 E0.01575 ; perimeter
G1 X203.788 Y72.543 E0.01575 ; perimeter
G1 X203.809 Y72.925 E0.01575 ; perimeter
G1 X203.776 Y73.306 E0.01575 ; perimeter
G1 X203.689 Y73.678 E0.01575 ; perimeter
G1 X203.549 Y74.034 E0.01575 ; perimeter
G1 X203.361 Y74.366 E0.01575 ; perimeter
G1 X203.127 Y74.669 E0.01575 ; perimeter
G1 X202.837 Y74.950 E0.01666 ; perimeter
G1 X176.973 Y96.652 E1.39085 ; perimeter
M73 Q99 S1
M204 S1000 ; adjust acceleration
G1 X176.879 Y97.249 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X176.025 Y96.232 E0.05470 ; perimeter
G1 X202.068 Y74.379 E1.40050 ; perimeter
G1 X202.308 Y74.139 E0.01398 ; perimeter
G1 X202.508 Y73.853 E0.01439 ; perimeter
G1 X202.656 Y73.537 E0.01439 ; perimeter
G1 X202.746 Y73.199 E0.01439 ; perimeter
G1 X202.776 Y72.851 E0.01439 ; perimeter
G1 X202.746 Y72.503 E0.01439 ; perimeter
G1 X202.656 Y72.166 E0.01439 ; perimeter
G1 X202.506 Y71.845 E0.01457 ; perimeter
G1 X202.280 Y71.548 E0.01541 ; perimeter
G1 X203.306 Y70.688 E0.05514 ; perimeter
G1 X203.745 Y71.261 E0.02972 ; perimeter
G1 X203.949 Y71.649 E0.01808 ; perimeter
G1 X204.096 Y72.063 E0.01808 ; perimeter
G1 X204.182 Y72.493 E0.01808 ; perimeter
G1 X204.206 Y72.931 E0.01808 ; perimeter
G1 X204.168 Y73.369 E0.01808 ; perimeter
G1 X204.068 Y73.796 E0.01808 ; perimeter
G1 X203.908 Y74.205 E0.01808 ; perimeter
G1 X203.692 Y74.587 E0.01808 ; perimeter
G1 X203.423 Y74.934 E0.01808 ; perimeter
G1 X203.102 Y75.245 E0.01841 ; perimeter
G1 X176.925 Y97.210 E1.40776 ; perimeter
M204 S1000 ; adjust acceleration
G1 X176.809 Y96.855 F10800.000 ; move inwards before travel
G1 F8640
G1 X176.025 Y96.232 E-0.30693 ; wipe and retract
G1 X177.528 Y94.970 E-0.45307 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.600 F10800.000 ; lift Z
G1 X160.226 Y76.553 ; move to first perimeter point
G1 Z24.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.882 Y76.143 E0.02205 ; perimeter
G1 X162.929 Y73.586 E0.16390 ; perimeter
G1 X168.066 Y73.586 E0.21162 ; perimeter
G1 X187.800 Y57.027 E1.06121 ; perimeter
G1 X188.098 Y56.808 E0.01525 ; perimeter
G1 X188.405 Y56.640 E0.01441 ; perimeter
G1 X188.731 Y56.513 E0.01441 ; perimeter
G1 X189.071 Y56.429 E0.01441 ; perimeter
G1 X189.418 Y56.391 E0.01441 ; perimeter
G1 X189.777 Y56.400 E0.01479 ; perimeter
G1 X188.946 Y57.097 E0.04468 ; perimeter
G1 X188.816 Y57.126 E0.00553 ; perimeter
G1 X188.512 Y57.241 E0.01338 ; perimeter
G1 X188.226 Y57.395 E0.01337 ; perimeter
G1 X187.981 Y57.574 E0.01250 ; perimeter
G1 X168.261 Y74.121 E1.06048 ; perimeter
G1 X163.124 Y74.121 E0.21162 ; perimeter
G1 X160.272 Y76.514 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.177 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.323 Y76.094 E0.05471 ; perimeter
G1 X162.785 Y73.189 E0.18617 ; perimeter
G1 X167.922 Y73.189 E0.21162 ; perimeter
G1 X187.555 Y56.715 E1.05580 ; perimeter
G1 X187.885 Y56.473 E0.01685 ; perimeter
G1 X188.237 Y56.280 E0.01655 ; perimeter
G1 X188.611 Y56.134 E0.01655 ; perimeter
G1 X189.001 Y56.038 E0.01655 ; perimeter
G1 X189.401 Y55.994 E0.01655 ; perimeter
G1 X189.802 Y56.002 E0.01655 ; perimeter
G1 X190.199 Y56.063 E0.01655 ; perimeter
G1 X190.636 Y56.197 E0.01880 ; perimeter
G1 X189.128 Y57.462 E0.08108 ; perimeter
G1 X188.930 Y57.507 E0.00836 ; perimeter
G1 X188.676 Y57.602 E0.01116 ; perimeter
G1 X188.438 Y57.731 E0.01116 ; perimeter
G1 X188.225 Y57.886 E0.01084 ; perimeter
G1 X168.405 Y74.517 E1.06587 ; perimeter
G1 X163.268 Y74.517 E0.21162 ; perimeter
G1 X160.223 Y77.073 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X160.159 Y76.712 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.323 Y76.094 E-0.30695 ; wipe and retract
G1 X160.826 Y74.833 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.600 F10800.000 ; lift Z
G1 X89.774 Y76.553 ; move to first perimeter point
G1 Z24.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.876 Y74.121 E0.15587 ; perimeter
G1 X81.739 Y74.121 E0.21162 ; perimeter
G1 X62.019 Y57.574 E1.06048 ; perimeter
G1 X61.774 Y57.395 E0.01250 ; perimeter
G1 X61.489 Y57.241 E0.01337 ; perimeter
G1 X61.185 Y57.126 E0.01338 ; perimeter
G1 X61.054 Y57.097 E0.00553 ; perimeter
G1 X60.223 Y56.400 E0.04468 ; perimeter
G1 X60.582 Y56.391 E0.01479 ; perimeter
G1 X60.929 Y56.429 E0.01441 ; perimeter
G1 X61.269 Y56.513 E0.01441 ; perimeter
G1 X61.595 Y56.640 E0.01441 ; perimeter
G1 X61.902 Y56.808 E0.01441 ; perimeter
G1 X62.200 Y57.027 E0.01525 ; perimeter
G1 X81.934 Y73.586 E1.06121 ; perimeter
G1 X87.071 Y73.586 E0.21162 ; perimeter
G1 X90.118 Y76.143 E0.16390 ; perimeter
G1 X89.813 Y76.507 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.823 Y77.111 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.732 Y74.517 E0.16626 ; perimeter
G1 X81.595 Y74.517 E0.21162 ; perimeter
G1 X61.775 Y57.886 E1.06587 ; perimeter
G1 X61.562 Y57.731 E0.01084 ; perimeter
G1 X61.324 Y57.602 E0.01116 ; perimeter
G1 X61.070 Y57.507 E0.01116 ; perimeter
G1 X60.872 Y57.462 E0.00837 ; perimeter
G1 X59.364 Y56.197 E0.08108 ; perimeter
G1 X59.801 Y56.063 E0.01879 ; perimeter
G1 X60.198 Y56.002 E0.01655 ; perimeter
G1 X60.600 Y55.994 E0.01655 ; perimeter
G1 X60.999 Y56.038 E0.01654 ; perimeter
G1 X61.389 Y56.134 E0.01655 ; perimeter
G1 X61.763 Y56.280 E0.01655 ; perimeter
G1 X62.115 Y56.473 E0.01655 ; perimeter
G1 X62.445 Y56.715 E0.01685 ; perimeter
G1 X82.078 Y73.189 E1.05580 ; perimeter
G1 X87.215 Y73.189 E0.21162 ; perimeter
G1 X90.677 Y76.094 E0.18617 ; perimeter
G1 X89.862 Y77.065 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.543 Y76.826 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.309 Y74.987 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.600 F10800.000 ; lift Z
G1 X73.073 Y96.690 ; move to first perimeter point
G1 Z24.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X47.164 Y74.950 E1.39331 ; perimeter
G1 X46.873 Y74.669 E0.01666 ; perimeter
G1 X46.639 Y74.366 E0.01575 ; perimeter
G1 X46.451 Y74.034 E0.01575 ; perimeter
G1 X46.311 Y73.678 E0.01575 ; perimeter
G1 X46.224 Y73.306 E0.01575 ; perimeter
G1 X46.191 Y72.925 E0.01575 ; perimeter
G1 X46.212 Y72.543 E0.01575 ; perimeter
G1 X46.287 Y72.169 E0.01575 ; perimeter
G1 X46.415 Y71.808 E0.01575 ; perimeter
G1 X46.593 Y71.470 E0.01575 ; perimeter
G1 X46.751 Y71.252 E0.01111 ; perimeter
G1 X47.176 Y71.608 E0.02286 ; perimeter
G1 X46.971 Y72.030 E0.01932 ; perimeter
G1 X46.862 Y72.434 E0.01725 ; perimeter
G1 X46.826 Y72.851 E0.01725 ; perimeter
G1 X46.862 Y73.268 E0.01725 ; perimeter
G1 X46.971 Y73.673 E0.01725 ; perimeter
G1 X47.148 Y74.052 E0.01725 ; perimeter
G1 X47.388 Y74.395 E0.01725 ; perimeter
G1 X47.664 Y74.672 E0.01612 ; perimeter
G1 X73.417 Y96.280 E1.38488 ; perimeter
G1 X73.111 Y96.645 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X73.121 Y97.249 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.898 Y75.245 E1.41022 ; perimeter
G1 X46.577 Y74.934 E0.01841 ; perimeter
G1 X46.308 Y74.587 E0.01808 ; perimeter
G1 X46.092 Y74.205 E0.01808 ; perimeter
G1 X45.932 Y73.796 E0.01808 ; perimeter
G1 X45.832 Y73.369 E0.01808 ; perimeter
G1 X45.794 Y72.931 E0.01808 ; perimeter
G1 X45.818 Y72.493 E0.01808 ; perimeter
G1 X45.904 Y72.063 E0.01808 ; perimeter
G1 X46.051 Y71.649 E0.01808 ; perimeter
G1 X46.255 Y71.261 E0.01808 ; perimeter
G1 X46.695 Y70.687 E0.02977 ; perimeter
G1 X47.720 Y71.547 E0.05511 ; perimeter
G1 X47.494 Y71.845 E0.01542 ; perimeter
G1 X47.344 Y72.166 E0.01456 ; perimeter
G1 X47.254 Y72.503 E0.01439 ; perimeter
G1 X47.224 Y72.851 E0.01439 ; perimeter
G1 X47.254 Y73.199 E0.01439 ; perimeter
G1 X47.344 Y73.537 E0.01439 ; perimeter
G1 X47.492 Y73.853 E0.01439 ; perimeter
G1 X47.692 Y74.139 E0.01439 ; perimeter
G1 X47.932 Y74.379 E0.01398 ; perimeter
G1 X73.975 Y96.232 E1.40050 ; perimeter
G1 X73.160 Y97.203 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X72.818 Y96.988 F10800.000 ; move inwards before travel
G1 F8640
G1 X70.635 Y95.092 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.600 F10800.000 ; lift Z
G1 X176.642 Y134.837 ; move to first perimeter point
G1 Z24.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X176.298 Y134.427 E0.02205 ; perimeter
G1 X202.050 Y112.818 E1.38488 ; perimeter
G1 X202.327 Y112.541 E0.01612 ; perimeter
G1 X202.567 Y112.198 E0.01725 ; perimeter
G1 X202.744 Y111.819 E0.01725 ; perimeter
G1 X202.853 Y111.414 E0.01725 ; perimeter
G1 X202.889 Y110.997 E0.01725 ; perimeter
G1 X202.853 Y110.580 E0.01725 ; perimeter
G1 X202.744 Y110.176 E0.01725 ; perimeter
G1 X202.539 Y109.755 E0.01931 ; perimeter
G1 X202.964 Y109.398 E0.02285 ; perimeter
G1 X203.122 Y109.616 E0.01108 ; perimeter
G1 X203.300 Y109.954 E0.01575 ; perimeter
G1 X203.427 Y110.315 E0.01575 ; perimeter
G1 X203.503 Y110.689 E0.01575 ; perimeter
G1 X203.524 Y111.071 E0.01575 ; perimeter
G1 X203.491 Y111.452 E0.01575 ; perimeter
G1 X203.403 Y111.824 E0.01575 ; perimeter
G1 X203.264 Y112.180 E0.01575 ; perimeter
G1 X203.076 Y112.513 E0.01575 ; perimeter
G1 X202.842 Y112.815 E0.01575 ; perimeter
G1 X202.551 Y113.096 E0.01666 ; perimeter
G1 X176.688 Y134.798 E1.39085 ; perimeter
M73 P99 R0
M204 S1000 ; adjust acceleration
G1 X176.593 Y135.395 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X175.740 Y134.378 E0.05470 ; perimeter
G1 X201.782 Y112.525 E1.40050 ; perimeter
G1 X202.022 Y112.285 E0.01398 ; perimeter
G1 X202.223 Y111.999 E0.01439 ; perimeter
G1 X202.370 Y111.683 E0.01439 ; perimeter
G1 X202.461 Y111.345 E0.01439 ; perimeter
G1 X202.491 Y110.997 E0.01439 ; perimeter
G1 X202.461 Y110.649 E0.01439 ; perimeter
G1 X202.370 Y110.312 E0.01439 ; perimeter
G1 X202.221 Y109.991 E0.01457 ; perimeter
G1 X201.994 Y109.694 E0.01541 ; perimeter
G1 X203.020 Y108.834 E0.05514 ; perimeter
G1 X203.459 Y109.407 E0.02972 ; perimeter
G1 X203.664 Y109.795 E0.01808 ; perimeter
G1 X203.810 Y110.209 E0.01808 ; perimeter
G1 X203.897 Y110.639 E0.01808 ; perimeter
G1 X203.921 Y111.077 E0.01808 ; perimeter
G1 X203.883 Y111.515 E0.01808 ; perimeter
G1 X203.783 Y111.942 E0.01808 ; perimeter
G1 X203.623 Y112.351 E0.01808 ; perimeter
G1 X203.407 Y112.733 E0.01808 ; perimeter
G1 X203.138 Y113.080 E0.01808 ; perimeter
G1 X202.817 Y113.391 E0.01841 ; perimeter
G1 X176.639 Y135.356 E1.40776 ; perimeter
M204 S1000 ; adjust acceleration
G1 X176.524 Y135.001 F10800.000 ; move inwards before travel
G1 F8640
G1 X175.740 Y134.378 E-0.30693 ; wipe and retract
G1 X177.243 Y133.117 E-0.45307 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.600 F10800.000 ; lift Z
G1 X159.940 Y114.699 ; move to first perimeter point
G1 Z24.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X159.596 Y114.289 E0.02205 ; perimeter
G1 X162.644 Y111.732 E0.16390 ; perimeter
G1 X167.781 Y111.732 E0.21162 ; perimeter
G1 X187.515 Y95.173 E1.06121 ; perimeter
G1 X187.813 Y94.954 E0.01525 ; perimeter
G1 X188.120 Y94.786 E0.01441 ; perimeter
G1 X188.446 Y94.659 E0.01441 ; perimeter
G1 X188.785 Y94.576 E0.01441 ; perimeter
G1 X189.133 Y94.537 E0.01441 ; perimeter
G1 X189.492 Y94.546 E0.01479 ; perimeter
G1 X188.661 Y95.243 E0.04468 ; perimeter
G1 X188.530 Y95.273 E0.00553 ; perimeter
G1 X188.226 Y95.387 E0.01338 ; perimeter
G1 X187.941 Y95.541 E0.01337 ; perimeter
G1 X187.696 Y95.720 E0.01250 ; perimeter
G1 X167.976 Y112.267 E1.06048 ; perimeter
G1 X162.839 Y112.267 E0.21162 ; perimeter
G1 X159.986 Y114.661 E0.15340 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.892 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X159.038 Y114.240 E0.05471 ; perimeter
G1 X162.500 Y111.335 E0.18617 ; perimeter
G1 X167.637 Y111.335 E0.21162 ; perimeter
G1 X187.270 Y94.861 E1.05580 ; perimeter
G1 X187.599 Y94.620 E0.01685 ; perimeter
G1 X187.952 Y94.426 E0.01655 ; perimeter
G1 X188.326 Y94.280 E0.01655 ; perimeter
G1 X188.716 Y94.185 E0.01655 ; perimeter
G1 X189.115 Y94.140 E0.01655 ; perimeter
G1 X189.517 Y94.149 E0.01655 ; perimeter
G1 X189.914 Y94.209 E0.01655 ; perimeter
G1 X190.350 Y94.343 E0.01880 ; perimeter
G1 X188.843 Y95.608 E0.08108 ; perimeter
G1 X188.645 Y95.653 E0.00836 ; perimeter
G1 X188.391 Y95.748 E0.01116 ; perimeter
G1 X188.153 Y95.877 E0.01116 ; perimeter
G1 X187.940 Y96.032 E0.01084 ; perimeter
G1 X168.120 Y112.663 E1.06587 ; perimeter
G1 X162.983 Y112.663 E0.21162 ; perimeter
G1 X159.938 Y115.219 E0.16378 ; perimeter
M204 S1000 ; adjust acceleration
G1 X159.874 Y114.858 F10800.000 ; move inwards before travel
G1 F8640
G1 X159.038 Y114.240 E-0.30695 ; wipe and retract
G1 X160.541 Y112.979 E-0.45305 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.600 F10800.000 ; lift Z
G1 X89.489 Y114.699 ; move to first perimeter point
G1 Z24.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X86.591 Y112.267 E0.15587 ; perimeter
G1 X81.454 Y112.267 E0.21162 ; perimeter
G1 X61.734 Y95.720 E1.06048 ; perimeter
G1 X61.489 Y95.541 E0.01250 ; perimeter
G1 X61.203 Y95.387 E0.01337 ; perimeter
G1 X60.899 Y95.273 E0.01338 ; perimeter
G1 X60.768 Y95.243 E0.00553 ; perimeter
G1 X59.938 Y94.546 E0.04468 ; perimeter
G1 X60.297 Y94.537 E0.01479 ; perimeter
G1 X60.644 Y94.576 E0.01441 ; perimeter
G1 X60.984 Y94.659 E0.01441 ; perimeter
G1 X61.310 Y94.786 E0.01441 ; perimeter
G1 X61.617 Y94.954 E0.01441 ; perimeter
G1 X61.915 Y95.173 E0.01525 ; perimeter
G1 X81.649 Y111.732 E1.06121 ; perimeter
G1 X86.786 Y111.732 E0.21162 ; perimeter
G1 X89.833 Y114.289 E0.16390 ; perimeter
G1 X89.528 Y114.653 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.538 Y115.257 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X86.446 Y112.663 E0.16626 ; perimeter
G1 X81.309 Y112.663 E0.21162 ; perimeter
G1 X61.489 Y96.032 E1.06587 ; perimeter
G1 X61.277 Y95.877 E0.01084 ; perimeter
G1 X61.039 Y95.749 E0.01116 ; perimeter
G1 X60.785 Y95.653 E0.01116 ; perimeter
G1 X60.587 Y95.608 E0.00837 ; perimeter
G1 X59.079 Y94.343 E0.08108 ; perimeter
G1 X59.515 Y94.209 E0.01879 ; perimeter
G1 X59.913 Y94.149 E0.01655 ; perimeter
G1 X60.314 Y94.140 E0.01655 ; perimeter
G1 X60.714 Y94.185 E0.01654 ; perimeter
G1 X61.104 Y94.280 E0.01655 ; perimeter
G1 X61.478 Y94.426 E0.01655 ; perimeter
G1 X61.830 Y94.619 E0.01655 ; perimeter
G1 X62.160 Y94.861 E0.01685 ; perimeter
G1 X81.793 Y111.335 E1.05580 ; perimeter
G1 X86.930 Y111.335 E0.21162 ; perimeter
G1 X90.392 Y114.240 E0.18617 ; perimeter
G1 X89.577 Y115.212 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X89.257 Y114.972 F10800.000 ; move inwards before travel
G1 F8640
G1 X87.024 Y113.134 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.600 F10800.000 ; lift Z
G1 X72.787 Y134.837 ; move to first perimeter point
G1 Z24.000 ; restore layer Z
G1 E0.80000 F2100.00000 ; unretract
M204 S800 ; adjust acceleration
G1 F4800
G1 X46.878 Y113.096 E1.39331 ; perimeter
G1 X46.588 Y112.815 E0.01666 ; perimeter
G1 X46.354 Y112.513 E0.01575 ; perimeter
G1 X46.165 Y112.180 E0.01575 ; perimeter
G1 X46.026 Y111.824 E0.01575 ; perimeter
G1 X45.939 Y111.452 E0.01575 ; perimeter
G1 X45.906 Y111.071 E0.01575 ; perimeter
G1 X45.927 Y110.690 E0.01575 ; perimeter
G1 X46.002 Y110.315 E0.01575 ; perimeter
G1 X46.130 Y109.955 E0.01575 ; perimeter
G1 X46.308 Y109.616 E0.01575 ; perimeter
G1 X46.466 Y109.398 E0.01111 ; perimeter
G1 X46.891 Y109.754 E0.02286 ; perimeter
G1 X46.685 Y110.176 E0.01932 ; perimeter
G1 X46.577 Y110.580 E0.01725 ; perimeter
G1 X46.541 Y110.997 E0.01725 ; perimeter
G1 X46.577 Y111.414 E0.01725 ; perimeter
G1 X46.685 Y111.819 E0.01725 ; perimeter
G1 X46.862 Y112.198 E0.01725 ; perimeter
G1 X47.102 Y112.541 E0.01725 ; perimeter
G1 X47.379 Y112.818 E0.01612 ; perimeter
G1 X73.131 Y134.427 E1.38488 ; perimeter
G1 X72.826 Y134.791 E0.01958 ; perimeter
M204 S1000 ; adjust acceleration
G1 X72.836 Y135.395 F10800.000 ; move to first perimeter point
M204 S800 ; adjust acceleration
G1 F3600
G1 X46.613 Y113.391 E1.41022 ; perimeter
G1 X46.292 Y113.080 E0.01841 ; perimeter
G1 X46.023 Y112.733 E0.01808 ; perimeter
G1 X45.807 Y112.351 E0.01808 ; perimeter
G1 X45.647 Y111.942 E0.01808 ; perimeter
G1 X45.547 Y111.515 E0.01808 ; perimeter
G1 X45.508 Y111.077 E0.01808 ; perimeter
G1 X45.533 Y110.639 E0.01808 ; perimeter
G1 X45.619 Y110.209 E0.01808 ; perimeter
G1 X45.766 Y109.795 E0.01808 ; perimeter
G1 X45.970 Y109.407 E0.01808 ; perimeter
G1 X46.410 Y108.833 E0.02977 ; perimeter
G1 X47.435 Y109.693 E0.05511 ; perimeter
G1 X47.209 Y109.992 E0.01542 ; perimeter
G1 X47.059 Y110.312 E0.01456 ; perimeter
G1 X46.969 Y110.649 E0.01439 ; perimeter
G1 X46.938 Y110.997 E0.01439 ; perimeter
G1 X46.969 Y111.345 E0.01439 ; perimeter
G1 X47.059 Y111.683 E0.01439 ; perimeter
G1 X47.207 Y111.999 E0.01439 ; perimeter
G1 X47.407 Y112.285 E0.01439 ; perimeter
G1 X47.647 Y112.525 E0.01398 ; perimeter
G1 X73.690 Y134.378 E1.40050 ; perimeter
G1 X72.875 Y135.349 E0.05224 ; perimeter
M204 S1000 ; adjust acceleration
G1 X72.533 Y135.134 F10800.000 ; move inwards before travel
G1 F8640;_WIPE
G1 X70.350 Y133.238 E-0.76000 ; wipe and retract
G1 E-0.04000 F2100.00000 ; retract
G1 Z24.600 F10800.000 ; lift Z
M107 ; disable fan
; Filament-specific end gcode
G4 ; wait
M221 S100
M104 S0 ; turn off temperature
M140 S0 ; turn off heatbed
M107 ; turn off fan
G1 Z54.6 ; Move print head up
G1 X0 Y200 F3000 ; home X axis
M84 ; disable motors
M73 P100 R0
M73 Q100 S0
; filament used [mm] = 13026.9
; filament used [cm3] = 31.3
; filament used [g] = 38.9
; filament cost = 1.0
; total filament used [g] = 38.9
; total filament cost = 1.0
; estimated printing time (normal mode) = 2h 15m 44s
; estimated printing time (silent mode) = 2h 18m 1s

; avoid_crossing_perimeters = 0
; bed_custom_model = 
; bed_custom_texture = 
; bed_shape = 0x0,250x0,250x210,0x210
; bed_temperature = 60
; before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
; between_objects_gcode = 
; bottom_fill_pattern = rectilinear
; bottom_solid_layers = 4
; bridge_acceleration = 1000
; bridge_angle = 0
; bridge_fan_speed = 100
; bridge_flow_ratio = 0.95
; bridge_speed = 30
; brim_width = 0
; clip_multipart_objects = 1
; compatible_printers_condition_cummulative = "printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4";"! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)"
; complete_objects = 0
; cooling = 1
; cooling_tube_length = 5
; cooling_tube_retraction = 91.5
; default_acceleration = 1000
; default_filament_profile = "Prusament PLA"
; default_print_profile = 0.15mm QUALITY MK3
; deretract_speed = 0
; disable_fan_first_layers = 1
; dont_support_bridges = 1
; duplicate_distance = 6
; elefant_foot_compensation = 0.1
; end_filament_gcode = "; Filament-specific end gcode"
; end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
; ensure_vertical_shell_thickness = 0
; external_perimeter_extrusion_width = 0.45
; external_perimeter_speed = 60
; external_perimeters_first = 0
; extra_loading_move = -2
; extra_perimeters = 0
; extruder_clearance_height = 25
; extruder_clearance_radius = 45
; extruder_colour = ""
; extruder_offset = 0x0
; extrusion_axis = E
; extrusion_multiplier = 1
; extrusion_width = 0.45
; fan_always_on = 1
; fan_below_layer_time = 100
; filament_colour = #FF8000
; filament_cooling_final_speed = 3.4
; filament_cooling_initial_speed = 2.2
; filament_cooling_moves = 4
; filament_cost = 25.4
; filament_density = 1.24
; filament_diameter = 1.75
; filament_load_time = 0
; filament_loading_speed = 28
; filament_loading_speed_start = 3
; filament_max_volumetric_speed = 15
; filament_minimal_purge_on_wipe_tower = 15
; filament_notes = "List of materials tested with standard PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFiberlogy PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nAmazonBasics PLA"
; filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
; filament_settings_id = "Prusa PLA - Copy"
; filament_soluble = 0
; filament_toolchange_delay = 0
; filament_type = PLA
; filament_unload_time = 0
; filament_unloading_speed = 90
; filament_unloading_speed_start = 100
; fill_angle = 45
; fill_density = 10%
; fill_pattern = rectilinear
; first_layer_acceleration = 1000
; first_layer_bed_temperature = 60
; first_layer_extrusion_width = 0.45
; first_layer_height = 0.25
; first_layer_speed = 30
; first_layer_temperature = 215
; gap_fill_speed = 0
; gcode_comments = 1
; gcode_flavor = marlin
; gcode_label_objects = 0
; high_current_on_filament_swap = 0
; host_type = octoprint
; infill_acceleration = 1000
; infill_every_layers = 1
; infill_extruder = 1
; infill_extrusion_width = 0.5
; infill_first = 0
; infill_only_where_needed = 0
; infill_overlap = 25%
; infill_speed = 180
; inherits_cummulative = "0.20mm SPEED MK3";;
; interface_shells = 0
; layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
; layer_height = 0.25
; machine_max_acceleration_e = 5000,5000
; machine_max_acceleration_extruding = 1250,1250
; machine_max_acceleration_retracting = 1250,1250
; machine_max_acceleration_x = 1000,960
; machine_max_acceleration_y = 1000,960
; machine_max_acceleration_z = 200,200
; machine_max_feedrate_e = 120,120
; machine_max_feedrate_x = 200,100
; machine_max_feedrate_y = 200,100
; machine_max_feedrate_z = 12,12
; machine_max_jerk_e = 4.5,4.5
; machine_max_jerk_x = 8,8
; machine_max_jerk_y = 8,8
; machine_max_jerk_z = 0.4,0.4
; machine_min_extruding_rate = 0,0
; machine_min_travel_rate = 0,0
; max_fan_speed = 100
; max_layer_height = 0.25
; max_print_height = 210
; max_print_speed = 200
; max_volumetric_speed = 0
; min_fan_speed = 100
; min_layer_height = 0.07
; min_print_speed = 15
; min_skirt_length = 4
; notes = 
; nozzle_diameter = 0.4
; only_retract_when_crossing_perimeters = 0
; ooze_prevention = 0
; output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
; overhangs = 1
; parking_pos_retraction = 92
; perimeter_acceleration = 800
; perimeter_extruder = 1
; perimeter_extrusion_width = 0.45
; perimeter_speed = 80
; perimeters = 3
; post_process = 
; print_host = 
; print_settings_id = 0.25mm SPEED MK3S
; printer_model = MK3S
; printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
; printer_settings_id = Original Prusa i3 MK3S
; printer_technology = FFF
; printer_variant = 0.4
; printer_vendor = 
; printhost_apikey = 
; printhost_cafile = 
; raft_layers = 0
; remaining_times = 1
; resolution = 0
; retract_before_travel = 1
; retract_before_wipe = 0%
; retract_layer_change = 1
; retract_length = 0.8
; retract_length_toolchange = 4
; retract_lift = 0.6
; retract_lift_above = 0
; retract_lift_below = 209
; retract_restart_extra = 0
; retract_restart_extra_toolchange = 0
; retract_speed = 35
; seam_position = rear
; serial_port = 
; serial_speed = 250000
; silent_mode = 1
; single_extruder_multi_material = 0
; single_extruder_multi_material_priming = 0
; skirt_distance = 2
; skirt_height = 3
; skirts = 1
; slice_closing_radius = 0.049
; slowdown_below_layer_time = 20
; small_perimeter_speed = 40
; solid_infill_below_area = 70
; solid_infill_every_layers = 0
; solid_infill_extruder = 1
; solid_infill_extrusion_width = 0.5
; solid_infill_speed = 180
; spiral_vase = 0
; standby_temperature_delta = -5
; start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.6}0.04{else}0.06{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{else}M900 K30{endif} ; Filament gcode LA 1.0"
; start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
; support_material = 0
; support_material_angle = 0
; support_material_auto = 1
; support_material_buildplate_only = 1
; support_material_contact_distance = 0.1
; support_material_enforce_layers = 0
; support_material_extruder = 0
; support_material_extrusion_width = 0.35
; support_material_interface_contact_loops = 0
; support_material_interface_extruder = 0
; support_material_interface_layers = 2
; support_material_interface_spacing = 0.2
; support_material_interface_speed = 100%
; support_material_pattern = rectilinear
; support_material_spacing = 2
; support_material_speed = 60
; support_material_synchronize_layers = 0
; support_material_threshold = 40
; support_material_with_sheath = 0
; support_material_xy_spacing = 50%
; temperature = 205
; thin_walls = 0
; threads = 12
; thumbnails = 
; toolchange_gcode = 
; top_fill_pattern = rectilinear
; top_infill_extrusion_width = 0.5
; top_solid_infill_speed = 60
; top_solid_layers = 4
; travel_speed = 180
; use_firmware_retraction = 0
; use_relative_e_distances = 1
; use_volumetric_e = 0
; variable_layer_height = 1
; wipe = 1
; wipe_into_infill = 0
; wipe_into_objects = 0
; wipe_tower = 1
; wipe_tower_bridging = 10
; wipe_tower_rotation_angle = 0
; wipe_tower_width = 60
; wipe_tower_x = 170
; wipe_tower_y = 125
; wiping_volumes_extruders = 70,70
; wiping_volumes_matrix = 0
; xy_size_compensation = 0
; z_offset = 0