; HEADER_BLOCK_START ; generated by OrcaSlicer 2.4.2 on 2026-10-26 at 13:17:15 ; BambuStudio G-code viewer: configuration in CONFIG_BLOCK below ; total layer number: 34 ; filament_density: 1.24 ; filament_diameter: 1.75 ; max_z_height: 6.80 ; filament: 1 ; HEADER_BLOCK_END ; external perimeters extrusion width = 0.45mm ; perimeters extrusion width = 0.45mm ; infill extrusion width = 0.45mm ; solid infill extrusion width = 0.45mm ; top infill extrusion width = 0.42mm ; first layer extrusion width = 0.50mm ; EXECUTABLE_BLOCK_START M486 S0 M486 Aangle-test-v1.3-B.stl_id_0_copy_0 M486 S-1 M73 P0 R38 M201 X10000 Y10000 Z400 E5000 M203 X350 Y350 Z12 E100 M204 P7000 R2500 T7000 ; sets acceleration (P, T) and retract acceleration (R), mm/sec^2 M205 X10.00 Y10.00 Z2.00 E10.00 ; sets the jerk limits, mm/sec M205 J0.010 ;TYPE:Custom ; --- Printer Initialization and Checks --- M17 ; enable steppers M862.1 P0.4 A0 F0 ; nozzle check M862.3 P "COREONE" ; printer model check M862.5 P2 ; g-code level check M862.6 P"Input shaper" ; FW feature check M115 U6.3.0+10073 ; --- Print Area and Coordinate System --- M555 X118 Y75.5 W32 H65 ; define print area G90 ; use absolute coordinates M83 ; extruder in relative mode ; --- Preparation --- ; just set the selected bed temp otherwise M140 S35 ; set bed temp M109 R170 ; wait for temp M84 E ; turn off E motor G28 ; home all axes without mesh bed leveling ; -- Chamber Temperature Control -- M141 S20 ; set nominal chamber temp M106 S70 G0 Z40 F10000 M104 T0 S150 M190 R35 ; wait for bed temp M107 G29 G ; absorb heat M109 R170 ; wait for MBL temp M302 S160 ; lower cold extrusion limit to 160C G1 E-2 F2400 ; retraction M73 P22 R29 M84 E ; turn off E motor ; --- Mesh Bed Leveling (MBL) --- G29 P9 X208 Y-2.5 W32 H4 ; limited MBL M84 E ; turn off E motor G29 P1 ; invalidate MBL and probe print area G29 P1 X150 Y0 W100 H20 C ; probe near purge area G29 P3.2 ; MBL interpolation G29 P3.13 ; MBL extrapolation outside probe area G29 A ; activate MBL ; --- Preparation for Purge Line --- M104 S230 G0 X249 Y-2.5 Z15 F4800 ; move away and ready for the purge M109 S230 G92 E0 ; reset extruder position M569 S0 E ; set spreadcycle mode for extruder ; --- Extrude Purge Line --- G92 E0 ; reset extruder position G1 E2 F2400 ; deretraction after the initial one M73 P78 R8 G0 E5 X235 Z0.2 F500 ; purge G0 X225 E4 F500 ; purge G0 X215 E4 F650 ; purge G0 X205 E4 F800 ; purge G0 X202 Z0.05 F8000 ; wipe, close to bed G0 X199 Z0.2 F8000 ; wipe, quickly away from bed G92 E0 ; reset extruder position M221 S100 ; set flow to 100% G90 G21 M83 ; use relative distances for extrusion M900 K0.05 ; Filament gcode M142 S36 ; set heatbreak target temp M106 S0 ;LAYER_CHANGE ;Z:0.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;0.2 G1 E-.7 F2700 ;AFTER_LAYER_CHANGE ;0.2 ;_SET_FAN_SPEED_CHANGING_LAYER M204 P500 ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=0 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 M204 T7000 M486 S0 G1 Z.8 F720 G1 X125.707 Y87.767 F21000 G1 Z.8 F720 G1 Z.2 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.652024 G1 F2700 G1 X126.024 Y88.099 E.02325 G1 X126.4 Y88.399 E.02435 G1 X125.025 Y88.375 E.06966 G1 X125.272 Y88.119 E.01805 G1 X125.363 Y87.367 E.03835 G1 X125.59 Y87.644 E.01817 G1 X125.68 Y87.738 E.00657 ;PATH_TASK id=1 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X126.244 Y87.445 Z.8 F21000 G1 X127.01 Y89.291 G1 X127.912 Y89.368 G1 X127.961 Y89.532 G1 X128.228 Y90.443 G1 X127.176 Y90.716 G1 X126.405 Y90.703 G1 X125.984 Y90.197 G1 X125.774 Y90.101 G1 X125.439 Y90.837 G1 Z.2 F720 G1 E.7 F1500 ;WIDTH:0.499999 G1 F2700 G1 X125.845 Y90.908 E.01566 G1 X126.814 Y90.952 E.03686 G1 X128.067 Y90.974 E.04763 G1 X128.479 Y90.846 E.0164 G1 X128.599 Y90.624 E.00961 ;PATH_TASK id=2 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.465683 G1 X128.72 Y90.401 E.00889 ;PATH_TASK id=3 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.431367 G1 X128.727 Y90.3 E.00329 ;PATH_TASK id=4 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.42507 G1 X128.741 Y89.2 E.03495 ;PATH_TASK id=5 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.451859 G1 X128.704 Y89.01 E.00658 ;PATH_TASK id=6 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.488004 G1 X128.668 Y88.82 E.00716 G1 X128.552 Y88.694 E.00634 G1 X128.672 Y88.572 E.00634 G1 X128.713 Y88.383 E.00715 ;PATH_TASK id=7 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.44758 G1 X128.754 Y88.194 E.0065 M73 P79 R8 ;PATH_TASK id=8 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.407156 G1 X128.802 Y84.391 E.1152 ;PATH_TASK id=9 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.416641 G1 X128.757 Y84.23 E.0052 ;PATH_TASK id=10 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.45832 G1 X128.711 Y84.069 E.00578 ;PATH_TASK id=11 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X128.666 Y83.908 E.00635 G1 X128.304 Y83.717 E.01557 G1 X128.185 Y83.706 E.00453 G1 X127.009 Y83.695 E.04469 G1 X126.575 Y83.951 E.01914 G1 X126.423 Y84.358 E.01653 G1 X126.441 Y84.808 E.01711 G1 X126.152 Y84.48 E.01664 G1 X125.616 Y84.056 E.02595 G1 X124.984 Y83.758 E.02655 G1 X124.383 Y83.65 E.02323 G1 X123.74 Y83.713 E.02454 G1 X123.525 Y83.772 E.00849 G1 X122.946 Y84.071 E.02476 G1 X122.455 Y84.551 E.02612 G1 X122.136 Y85.13 E.0251 G1 X121.978 Y85.798 E.02608 G1 X121.973 Y86.448 E.02473 G1 X122.118 Y87.122 E.02618 G1 X122.346 Y87.6 E.02013 G1 X122.752 Y88.074 E.02374 G1 X123.289 Y88.422 E.0243 G1 X122.589 Y88.41 E.0266 ;PATH_TASK id=1 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X122.289 Y88.481 E.01172 G1 X122.162 Y88.562 E.00574 G1 X121.906 Y89.084 E.02208 G1 X121.893 Y89.868 E.02982 G1 X121.983 Y90.22 E.01379 G1 X122.202 Y90.453 E.01214 G1 X122.482 Y90.637 E.01277 G1 X122.837 Y90.974 E.0186 G1 X123.115 Y91.406 E.0195 G1 X123.353 Y91.858 E.01942 G1 X123.534 Y92.025 E.00938 G1 X123.882 Y92.13 E.01379 G1 X124.557 Y92.123 E.02566 G1 X125.105 Y92.104 E.02085 G1 X125.45 Y91.921 E.01486 G1 X125.597 Y91.708 E.00981 G1 X125.618 Y91.211 E.01891 G1 X125.457 Y90.873 E.01423 ;PATH_TASK id=12 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X124.755 Y91.289 Z.8 F21000 G1 X124.334 Y90.552 G1 X124.508 Y90.285 G1 X124.431 Y90.234 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Outer wall G1 F2700 G1 X124.863 Y90.241 E.01642 G1 X125.837 Y90.426 E.03771 G1 X126.836 Y90.474 E.03799 G1 X128.075 Y90.496 E.04711 G1 X128.2 Y90.457 E.00495 G1 X128.283 Y90.325 E.00594 G1 X128.305 Y89.193 E.04303 G1 X128.271 Y89.077 E.00459 ;PATH_TASK id=13 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.547709 G1 X128.121 Y88.96 E.00798 ;PATH_TASK id=14 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.549772 G2 X127.21 Y88.943 I-1.828 J74.728 E.03841 ;PATH_TASK id=15 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.548402 G1 X126.702 Y88.958 E.02137 ;PATH_TASK id=16 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X125.494 Y88.938 E.04592 ;PATH_TASK id=17 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.548599 G1 X125.046 Y88.906 E.01889 ;PATH_TASK id=18 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.597199 G1 X124.598 Y88.874 E.02071 ;PATH_TASK id=19 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.616616 G1 X124.065 Y88.855 E.02544 G1 X123.879 Y88.871 E.00887 ;PATH_TASK id=20 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.577744 G1 X123.694 Y88.888 E.00827 ;PATH_TASK id=21 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.538872 G1 X123.509 Y88.904 E.00767 ;PATH_TASK id=22 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X122.5 Y88.91 E.03833 ;PATH_TASK id=12 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X122.385 Y89.092 E.0082 G1 X122.375 Y89.916 E.03131 G1 X122.465 Y90.053 E.00624 G1 X122.89 Y90.333 E.01936 G1 X123.213 Y90.675 E.01786 G1 X123.496 Y91.097 E.01934 G1 X123.734 Y91.569 E.0201 G1 X123.86 Y91.648 E.00563 G1 X124.971 Y91.639 E.04224 G1 X125.13 Y91.563 E.0067 G1 X125.165 Y91.365 E.00761 G1 X124.93 Y90.886 E.0203 G1 X124.759 Y90.605 E.01249 G1 X124.622 Y90.565 E.00542 G1 X124.451 Y90.269 E.01301 ;PATH_TASK id=23 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X124.498 Y90.3 Z.8 F21000 G1 X126.405 Y90.703 G1 X127.176 Y90.716 G1 X128.228 Y90.443 G1 X128.255 Y87.599 G1 X128.262 Y86.771 G1 X128.265 Y86.497 G1 X129.125 Y86.504 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.407156 G1 F2700 G1 X129.118 Y88.198 E.05129 ;PATH_TASK id=24 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.44758 G1 X129.098 Y88.448 E.00847 ;PATH_TASK id=25 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.488004 G1 X129.077 Y88.699 E.00931 G1 X129.096 Y88.951 E.00935 ;PATH_TASK id=26 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.451859 G1 X129.114 Y89.203 E.00859 ;PATH_TASK id=27 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.42507 G1 X129.109 Y90.376 E.03726 ;PATH_TASK id=28 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.462535 G1 X129.09 Y90.763 E.01352 ;PATH_TASK id=29 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X129.071 Y91.15 E.01472 G1 X129.071 Y94.176 E.11501 G1 X129.075 Y94.941 E.02907 ;PATH_TASK id=30 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.492123 G1 X129.09 Y95.428 E.01821 ;PATH_TASK id=31 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.462326 G1 X129.105 Y95.916 E.017 ;PATH_TASK id=32 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.455931 G1 X129.093 Y96.425 E.0175 ;PATH_TASK id=33 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X129.071 Y97.149 E.02754 G1 X129.072 Y98.913 E.06705 ;PATH_TASK id=34 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.507682 G1 X129.066 Y100.368 E.0562 G1 X129.071 Y100.943 E.02224 ;PATH_TASK id=35 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X129.071 Y103.994 E.11593 ;PATH_TASK id=36 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.533083 G1 X129.055 Y104.385 E.01597 ;PATH_TASK id=37 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.566167 G1 X129.038 Y104.776 E.01705 G1 X129.051 Y105.121 E.01502 ;PATH_TASK id=38 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.540233 G1 X129.064 Y105.466 E.01428 ;PATH_TASK id=39 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.524954 G1 X129.059 Y106.256 E.03166 G1 X129.071 Y106.794 E.02157 ;PATH_TASK id=40 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X129.071 Y114.313 E.28575 ;PATH_TASK id=41 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.549724 G1 X129.047 Y114.7 E.01637 ;PATH_TASK id=42 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.599449 G1 X129.022 Y115.088 E.01797 G1 X129.032 Y115.888 E.03703 ;PATH_TASK id=43 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.578866 G1 X129.052 Y116.141 E.01133 ;PATH_TASK id=44 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.539433 G1 X129.071 Y116.395 E.0105 ;PATH_TASK id=45 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X129.071 Y122.922 E.24805 ;PATH_TASK id=46 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.542136 G1 X129.05 Y123.11 E.00787 ;PATH_TASK id=47 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.584272 G1 X129.029 Y123.298 E.00853 ;PATH_TASK id=48 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.626408 G1 X129.008 Y123.487 E.0092 ;PATH_TASK id=49 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.668544 G1 X128.987 Y123.675 E.00986 ;PATH_TASK id=50 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.71068 G1 X128.966 Y123.864 E.01053 ;PATH_TASK id=51 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.719637 G1 X128.962 Y124.926 E.05979 G1 X128.984 Y125.005 E.00462 ;PATH_TASK id=52 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.67571 G1 X129.006 Y125.084 E.00432 ;PATH_TASK id=53 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.631782 G1 X129.028 Y125.164 E.00402 ;PATH_TASK id=54 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.587855 G1 X129.049 Y125.243 E.00372 ;PATH_TASK id=55 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.543927 G1 X129.071 Y125.322 E.00342 ;PATH_TASK id=56 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X129.071 Y137.571 E.46556 G1 X127.888 Y137.571 E.04497 G1 X127.733 Y137.594 E.00596 ;PATH_TASK id=57 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.453938 G1 X127.578 Y137.618 E.00536 ;PATH_TASK id=58 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.407876 G1 X127.423 Y137.641 E.00476 ;PATH_TASK id=59 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.365214 G1 X126.852 Y137.639 E.01529 ;PATH_TASK id=60 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.410365 G1 X126.559 Y137.616 E.00899 ;PATH_TASK id=61 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.455515 G1 X126.265 Y137.594 E.01009 ;PATH_TASK id=62 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X125.758 Y137.571 E.01932 G1 X124.228 Y137.572 E.05814 ;PATH_TASK id=63 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499653 G1 X123.959 Y137.588 E.01022 ;PATH_TASK id=64 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.46674 G1 X123.69 Y137.605 E.00949 ;PATH_TASK id=65 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.468139 G1 X123.168 Y137.587 E.01848 ;PATH_TASK id=66 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X122.613 Y137.571 E.02109 G1 X120.929 Y137.571 E.06403 G1 X120.929 Y135.51 E.07835 G1 X120.908 Y135.294 E.00826 ;PATH_TASK id=67 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.458445 G1 X120.887 Y135.077 E.00751 ;PATH_TASK id=68 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.416891 G1 X120.866 Y134.861 E.00676 ;PATH_TASK id=69 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.396604 G1 X120.877 Y134.144 E.02108 ;PATH_TASK id=70 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.431069 G1 X120.894 Y133.967 E.00574 ;PATH_TASK id=71 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.465534 G1 X120.911 Y133.79 E.00625 ;PATH_TASK id=72 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X120.929 Y133.613 E.00676 G1 X120.929 Y125.537 E.30695 G1 X120.913 Y124.64 E.03408 ;PATH_TASK id=73 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.475621 G1 X120.916 Y123.755 E.03185 ;PATH_TASK id=74 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X120.929 Y122.858 E.03411 G1 X120.929 Y116.65 E.23593 ;PATH_TASK id=75 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.54143 G1 X120.949 Y116.265 E.01601 ;PATH_TASK id=76 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.582861 G1 X120.97 Y115.879 E.01734 G1 X120.949 Y115.141 E.03314 ;PATH_TASK id=77 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.563851 G1 X120.96 Y114.63 E.02213 G1 X120.945 Y114.251 E.01645 ;PATH_TASK id=78 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.531925 G1 X120.929 Y113.871 E.01544 ;PATH_TASK id=79 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X120.929 Y107.095 E.25753 ;PATH_TASK id=80 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.541387 G1 X120.949 Y106.905 E.00796 ;PATH_TASK id=81 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.582775 G1 X120.97 Y106.714 E.00862 ;PATH_TASK id=82 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.624163 G1 X120.991 Y106.523 E.00928 ;PATH_TASK id=83 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.66555 G1 X121.011 Y106.332 E.00994 G1 X120.99 Y105.586 E.03866 ;PATH_TASK id=84 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.642475 G1 X121 Y105.078 E.02531 G1 X120.976 Y104.833 E.01227 ;PATH_TASK id=85 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.594983 G1 X120.952 Y104.588 E.0113 ;PATH_TASK id=86 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.547491 G1 X120.929 Y104.343 E.01033 ;PATH_TASK id=87 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X120.929 Y100.759 E.13622 ;PATH_TASK id=88 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.542768 G1 X120.95 Y100.466 E.01219 ;PATH_TASK id=89 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.585537 G1 X120.971 Y100.174 E.01323 ;PATH_TASK id=90 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.628306 G1 X120.993 Y99.881 E.01428 ;PATH_TASK id=91 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.671074 G1 X121.014 Y99.589 E.01532 ;PATH_TASK id=92 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.677827 G1 X121.017 Y98.786 E.04239 G1 X120.995 Y98.503 E.01499 ;PATH_TASK id=93 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.63337 G1 X120.973 Y98.22 E.01394 ;PATH_TASK id=94 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.588913 G1 X120.951 Y97.937 E.01289 ;PATH_TASK id=95 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.544456 G1 X120.929 Y97.653 E.01184 ;PATH_TASK id=96 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X120.929 Y82.429 E.57864 G1 X129.071 Y82.429 E.30948 G1 X129.071 Y83.741 E.0499 ;PATH_TASK id=97 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X129.092 Y83.958 E.00827 ;PATH_TASK id=98 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.45832 G1 X129.113 Y84.175 E.00752 ;PATH_TASK id=99 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.416641 G1 X129.134 Y84.391 E.00676 ;PATH_TASK id=23 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.407156 G1 X129.125 Y86.464 E.06278 ;PATH_TASK id=100 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X128.265 Y86.457 Z.8 F21000 G1 X128.286 Y84.288 G1 X127.451 Y84.027 G1 X127.181 Y84.454 G1 X127.31 Y86.516 G1 X127.171 Y86.641 G1 X127.04 Y86.495 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Outer wall ;WIDTH:0.499999 G1 F2700 G1 X126.569 Y85.95 E.02735 G1 X126.258 Y85.337 E.02616 G1 X125.844 Y84.847 E.02437 G1 X125.397 Y84.481 E.02196 G1 X124.888 Y84.227 E.0216 G1 X124.362 Y84.129 E.02037 G1 X123.725 Y84.207 E.02437 G1 X123.265 Y84.428 E.01939 G1 X122.864 Y84.799 E.02079 G1 X122.599 Y85.252 E.01995 G1 X122.456 Y85.812 E.02196 G1 X122.444 Y86.364 E.02098 G1 X122.55 Y86.917 E.0214 G1 X122.789 Y87.402 E.02054 G1 X123.146 Y87.783 E.01983 G1 X123.624 Y88.054 E.02088 ;PATH_TASK id=101 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.538872 G1 X123.798 Y88.119 E.00767 ;PATH_TASK id=102 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.577744 G1 X123.972 Y88.184 E.00827 ;PATH_TASK id=103 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.616616 G1 X124.146 Y88.248 E.00887 G1 X124.556 Y88.28 E.01961 ;PATH_TASK id=104 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.597199 G1 X124.639 Y88.166 E.00649 ;PATH_TASK id=105 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.548599 G1 X124.722 Y88.053 E.00592 ;PATH_TASK id=106 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X124.769 Y87.657 E.01514 ;PATH_TASK id=107 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.549192 G1 X124.849 Y86.782 E.03699 M73 P79 R7 G1 X124.729 Y86.701 E.00608 ;PATH_TASK id=108 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.517304 G1 X124.291 Y86.66 E.01737 ;PATH_TASK id=109 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X124.096 Y86.602 E.00772 G1 X123.95 Y86.482 E.00717 G1 X123.863 Y86.247 E.00954 ;PATH_TASK id=110 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X123.893 Y85.907 E.01297 G1 X124.016 Y85.746 E.0077 G1 X124.175 Y85.669 E.0067 G1 X124.392 Y85.68 E.00826 G1 X124.708 Y85.842 E.0135 ;PATH_TASK id=111 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.517304 G1 X125.082 Y86.197 E.02032 G1 X125.551 Y86.725 E.02788 ;PATH_TASK id=112 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.503139 G1 X126.019 Y87.292 E.02813 ;PATH_TASK id=113 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X126.447 Y87.735 E.02341 G1 X126.908 Y88.083 E.02195 ;PATH_TASK id=114 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.538804 G1 X127.161 Y88.22 E.01186 ;PATH_TASK id=115 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.577608 G1 X127.413 Y88.357 E.01278 G1 X128.109 Y88.414 E.03103 ;PATH_TASK id=116 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.545794 G1 X128.238 Y88.355 E.00591 ;PATH_TASK id=117 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.508287 G1 X128.319 Y88.219 E.00611 ;PATH_TASK id=100 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X128.386 Y84.395 E.14538 G1 X128.326 Y84.245 E.00612 G1 X128.217 Y84.188 E.0047 G1 X127.111 Y84.175 E.04204 G1 X126.962 Y84.236 E.00611 G1 X126.902 Y84.375 E.00576 G1 X126.937 Y85.15 E.02951 G1 X127.065 Y86.082 E.03574 G1 X127.042 Y86.455 E.01422 ;PATH_TASK id=118 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X127.192 Y86.622 Z.8 F21000 G1 X127.181 Y84.454 G1 X127.451 Y84.027 G1 X128.286 Y84.288 G1 X128.255 Y87.599 G1 X127.936 Y87.997 G1 X127.812 Y87.995 G1 X127.786 Y87.994 G1 X127.762 Y87.993 G1 X127.738 Y87.991 G1 X127.714 Y87.99 G1 X127.69 Y87.988 G1 X127.667 Y87.986 G1 X127.647 Y87.984 G1 X127.623 Y87.981 G1 X127.595 Y87.977 G1 X127.571 Y87.974 G1 X127.552 Y87.971 G1 X127.528 Y87.968 G1 X127.504 Y87.963 G1 X127.112 Y87.894 G1 X126.669 Y87.7 G1 X126.633 Y87.683 G1 X126.519 Y87.629 G1 X126.456 Y87.599 G1 X126.375 Y87.558 G1 X126.291 Y87.515 G1 X126.275 Y87.506 G1 X124.324 Y85.88 G1 X124.319 Y85.899 G1 X124.364 Y86.137 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.494866 G1 F2700 G1 X124.308 Y86.137 E.00212 G1 X124.279 Y86.186 E.00212 G1 X124.308 Y86.235 E.00212 G1 X124.364 Y86.235 E.00212 G1 X124.392 Y86.186 E.00212 ;PATH_TASK id=119 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X124.319 Y85.899 Z.8 F21000 G1 X127.912 Y89.368 G1 X127.961 Y89.532 G1 X128.228 Y90.443 G1 X127.176 Y90.716 G1 X126.519 Y90.705 G1 X128.167 Y95.263 G1 X128.621 Y95.169 G1 Z.2 F720 G1 E.7 F1500 ;WIDTH:0.492123 G1 F2700 G1 X128.601 Y95.05 E.00451 ;PATH_TASK id=120 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X128.295 Y94.482 E.02452 G1 X127.833 Y94.022 E.02477 G1 X127.222 Y93.672 E.02676 G1 X126.667 Y93.486 E.02225 G1 X125.996 Y93.374 E.02586 G1 X125.289 Y93.334 E.02693 G1 X124.497 Y93.36 E.03011 G1 X123.852 Y93.467 E.02484 G1 X123.205 Y93.693 E.02606 G1 X122.6 Y94.075 E.02718 G1 X122.158 Y94.58 E.02551 G1 X121.889 Y95.181 E.02503 G1 X121.793 Y95.792 E.0235 G1 X121.847 Y96.425 E.02415 G1 X122.042 Y96.971 E.02204 G1 X122.193 Y97.211 E.01079 G1 X122.587 Y97.661 E.02273 G1 X123.027 Y97.969 E.02041 ;PATH_TASK id=121 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X123.401 Y98.135 E.01556 G1 X122.976 Y98.128 E.01618 G1 X122.244 Y98.143 E.02782 G1 X122.039 Y98.239 E.00859 ;PATH_TASK id=122 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.544456 G1 X121.942 Y98.377 E.00703 ;PATH_TASK id=123 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.588913 G1 X121.846 Y98.515 E.00765 ;PATH_TASK id=124 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.63337 G1 X121.749 Y98.653 E.00828 ;PATH_TASK id=125 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.677827 G1 X121.652 Y98.791 E.0089 ;PATH_TASK id=126 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.679297 G1 X121.65 Y99.723 E.04929 G1 X121.746 Y99.832 E.00774 ;PATH_TASK id=127 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.634473 G1 X121.843 Y99.942 E.00719 ;PATH_TASK id=128 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.589648 G1 X121.94 Y100.052 E.00665 ;PATH_TASK id=129 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.544824 G1 X122.037 Y100.161 E.0061 ;PATH_TASK id=130 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X122.327 Y100.353 E.01322 G1 X122.617 Y100.624 E.0151 G1 X122.877 Y100.988 E.01701 G1 X123.12 Y101.457 E.02008 G1 X123.28 Y101.667 E.01003 G1 X123.553 Y101.815 E.0118 G1 X124.127 Y101.834 E.02182 G1 X124.978 Y101.804 E.03234 G1 X125.293 Y101.621 E.01388 G1 X125.429 Y101.423 E.0091 G1 X125.453 Y100.919 E.01917 G1 X125.274 Y100.545 E.01575 G1 X125.68 Y100.616 E.01566 G1 X126.602 Y100.659 E.03508 G1 X127.902 Y100.683 E.04941 G1 X128.314 Y100.554 E.0164 ;PATH_TASK id=131 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.514599 G1 X128.596 Y100.117 E.02041 G1 X128.603 Y100.009 E.00424 ;PATH_TASK id=132 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.507682 G1 X128.617 Y98.898 E.04295 ;PATH_TASK id=133 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X128.28 Y98.307 E.02586 G1 X127.944 Y98.212 E.01326 G1 X127.069 Y98.198 E.03326 G1 X127.396 Y98.074 E.01329 G1 X127.821 Y97.805 E.01911 G1 X128.137 Y97.525 E.01606 G1 X128.486 Y97.039 E.02272 G1 X128.681 Y96.406 E.02519 ;PATH_TASK id=134 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.455931 G1 X128.713 Y95.734 E.02312 ;PATH_TASK id=135 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.46416 G1 X128.657 Y95.392 E.01213 ;PATH_TASK id=119 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.492123 G1 X128.627 Y95.209 E.00693 ;PATH_TASK id=136 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X128.174 Y95.258 F21000 ;TYPE:Outer wall ;WIDTH:0.499999 G1 F2700 G1 X127.946 Y94.808 E.01916 G1 X127.581 Y94.429 E.01999 G1 X127.14 Y94.156 E.01972 G1 X126.605 Y93.964 E.0216 G1 X125.991 Y93.854 E.02373 G1 X125.319 Y93.813 E.02556 G1 X124.593 Y93.831 E.02762 G1 X124 Y93.922 E.02278 G1 X123.444 Y94.108 E.02228 G1 X122.945 Y94.406 E.02209 G1 X122.586 Y94.794 E.02012 G1 X122.361 Y95.263 E.01977 G1 X122.272 Y95.809 E.02102 G1 X122.329 Y96.38 E.02182 G1 X122.521 Y96.855 E.01945 G1 X122.862 Y97.269 E.02041 G1 X123.345 Y97.599 E.02223 ;PATH_TASK id=137 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X123.856 Y97.799 E.02087 ;PATH_TASK id=138 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.536988 G1 X124.043 Y97.856 E.008 ;PATH_TASK id=139 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.573977 G1 X124.229 Y97.912 E.0086 ;PATH_TASK id=140 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.610966 G1 X124.415 Y97.969 E.0092 G1 X125.043 Y98.011 E.0297 ;PATH_TASK id=141 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.592414 G1 X125.653 Y98.015 E.02791 ;PATH_TASK id=142 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.613826 G1 X126.188 Y97.981 E.0254 G1 X126.366 Y97.927 E.00885 ;PATH_TASK id=143 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.575884 G1 X126.544 Y97.872 E.00826 ;PATH_TASK id=144 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.537942 G1 X126.722 Y97.817 E.00767 ;PATH_TASK id=136 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X127.271 Y97.603 E.0224 G1 X127.714 Y97.286 E.02071 G1 X128.04 Y96.866 E.0202 G1 X128.227 Y96.364 E.02035 G1 X128.272 Y95.805 E.02132 G1 X128.181 Y95.297 E.0196 ;PATH_TASK id=145 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X128.174 Y95.299 Z.8 F21000 G1 X128.181 Y95.335 G1 X128.187 Y95.37 G1 X128.193 Y95.406 G1 X128.198 Y95.442 G1 X128.202 Y95.478 G1 X128.209 Y95.541 G1 X128.214 Y95.586 G1 X128.217 Y95.622 G1 X128.219 Y95.658 G1 X128.222 Y95.695 G1 X128.223 Y95.731 G1 X128.225 Y95.768 G1 X128.226 Y95.804 G1 X128.227 Y95.842 G1 X128.227 Y95.878 G1 X128.227 Y95.914 G1 X128.227 Y95.943 G1 X128.226 Y95.988 G1 X128.144 Y100.236 G1 X127.011 Y100.425 G1 X126.239 Y100.412 G1 X124.378 Y99.694 G1 X124.189 Y99.849 G1 X124.266 Y99.943 G1 Z.2 F720 G1 E.7 F1500 G1 F2700 G1 X124.697 Y99.95 E.01642 G1 X125.672 Y100.135 E.03771 G1 X126.624 Y100.181 E.03621 G1 X127.757 Y100.202 E.04308 G1 X128.034 Y100.166 E.01062 G1 X128.117 Y100.033 E.00594 G1 X128.139 Y98.901 E.04303 G1 X128.037 Y98.719 E.00793 G1 X127.969 Y98.694 E.00278 G1 X126.762 Y98.671 E.04588 ;PATH_TASK id=146 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.539923 G1 X126.582 Y98.648 E.00749 ;PATH_TASK id=147 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.579846 G1 X126.402 Y98.625 E.00809 ;PATH_TASK id=148 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.619769 G1 X126.222 Y98.602 E.00869 G1 X125.672 Y98.606 E.0264 ;PATH_TASK id=149 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.592414 G1 X125.04 Y98.598 E.02887 ;PATH_TASK id=150 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.610966 G1 X124.351 Y98.574 E.03257 G1 X124.169 Y98.59 E.00863 ;PATH_TASK id=151 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.573977 G1 X123.987 Y98.605 E.00807 ;PATH_TASK id=152 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.536988 G1 X123.805 Y98.621 E.00751 ;PATH_TASK id=153 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X122.432 Y98.597 E.05217 G1 X122.31 Y98.633 E.00486 G1 X122.22 Y98.801 E.00722 G1 X122.206 Y99.585 E.02982 G1 X122.3 Y99.762 E.00759 G1 X122.725 Y100.042 E.01936 G1 X123.047 Y100.383 E.01786 G1 X123.331 Y100.806 E.01934 G1 X123.583 Y101.294 E.02088 G1 X123.731 Y101.36 E.00616 G1 X124.848 Y101.343 E.04247 G1 X124.98 Y101.25 E.00615 G1 X125 Y101.074 E.00671 G1 X124.765 Y100.595 E.0203 G1 X124.594 Y100.314 E.01249 G1 X124.457 Y100.274 E.00542 G1 X124.286 Y99.978 E.01301 ;PATH_TASK id=154 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X124.184 Y99.853 Z.8 F21000 G1 X124.59 Y100.998 G1 X124.322 Y103.34 G1 X123.063 Y103.494 G1 X122.713 Y103.74 G1 X122.367 Y104.137 G1 X122.34 Y104.169 G1 X122.314 Y104.202 G1 X122.288 Y104.235 G1 X122.264 Y104.269 G1 X122.239 Y104.304 G1 X122.216 Y104.338 G1 X122.193 Y104.374 G1 X122.172 Y104.41 G1 X122.15 Y104.446 G1 X121.649 Y105.542 G1 X122.138 Y106.698 G1 X122.143 Y106.709 G1 X122.157 Y106.738 G1 X122.164 Y106.749 G1 X122.187 Y106.787 G1 X122.211 Y106.825 G1 X122.236 Y106.862 G1 X122.262 Y106.898 G1 X122.289 Y106.934 G1 X122.316 Y106.969 G1 X122.344 Y107.004 G1 X122.643 Y107.358 G1 X122.718 Y107.422 G1 X123.128 Y107.622 G1 X123.553 Y107.681 G1 X123.595 Y107.687 G1 X123.638 Y107.691 G1 X123.68 Y107.695 G1 X124.232 Y107.738 G1 X124.708 Y107.6 G1 X124.708 Y107.6 G1 X124.752 Y107.659 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Inner wall G1 F2700 G1 X125.075 Y107.872 E.0147 G1 X125.413 Y108.073 E.01494 G1 X126.028 Y108.175 E.0237 G1 X126.413 Y108.153 E.01465 G1 X126.911 Y108.058 E.01926 G1 X127.522 Y107.754 E.02593 G1 X128.016 Y107.296 E.02562 G1 X128.377 Y106.693 E.02671 ;PATH_TASK id=155 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.528091 G1 X128.573 Y106.017 E.02838 G1 X128.586 Y105.349 E.02696 ;PATH_TASK id=156 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.566167 G1 X128.519 Y104.821 E.02319 G1 X128.439 Y104.643 E.00849 ;PATH_TASK id=157 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.520226 G1 X128.101 Y104.024 E.02798 ;PATH_TASK id=158 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X127.62 Y103.53 E.02619 G1 X127.143 Y103.239 E.02128 G1 X126.546 Y103.069 E.02357 G1 X126.034 Y103.043 E.01948 G1 X125.523 Y103.128 E.01969 G1 X125.289 Y103.213 E.00946 G1 X124.825 Y103.534 E.02144 ;PATH_TASK id=159 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X124.5 Y103.351 E.01417 G1 X124.123 Y103.231 E.01504 G1 X123.48 Y103.231 E.02446 G1 X122.933 Y103.408 E.02184 G1 X122.741 Y103.51 E.00829 G1 X122.227 Y103.937 E.02539 G1 X121.856 Y104.498 E.02555 ;PATH_TASK id=160 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.547491 G1 X121.77 Y104.7 E.00918 ;PATH_TASK id=161 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.594983 G1 X121.684 Y104.901 E.01004 ;PATH_TASK id=162 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.642475 G1 X121.598 Y105.102 E.0109 G1 X121.572 Y105.782 E.03394 ;PATH_TASK id=163 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.667363 G1 X121.632 Y106.3 E.02708 G1 X121.714 Y106.442 E.00851 ;PATH_TASK id=164 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.625522 G1 X121.795 Y106.585 E.00794 ;PATH_TASK id=165 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.583681 G1 X121.877 Y106.727 E.00737 ;PATH_TASK id=166 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.54184 G1 X121.959 Y106.869 E.0068 ;PATH_TASK id=154 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X122.391 Y107.392 E.02579 G1 X122.954 Y107.755 E.02548 G1 X123.166 Y107.835 E.00861 G1 X123.649 Y107.925 E.01867 G1 X124.183 Y107.904 E.02032 G1 X124.715 Y107.675 E.02202 ;PATH_TASK id=167 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X124.705 Y107.6 Z.8 F21000 G1 X124.232 Y107.738 G1 X123.68 Y107.695 G1 X123.638 Y107.691 G1 X123.595 Y107.687 G1 X123.553 Y107.681 G1 X123.128 Y107.622 G1 X122.718 Y107.422 G1 X122.643 Y107.358 G1 X122.344 Y107.004 G1 X122.316 Y106.969 G1 X122.289 Y106.934 G1 X122.262 Y106.898 G1 X122.236 Y106.862 G1 X122.211 Y106.825 G1 X122.187 Y106.787 G1 X122.164 Y106.749 G1 X122.157 Y106.738 G1 X122.143 Y106.709 G1 X122.138 Y106.698 G1 X121.649 Y105.542 G1 X122.15 Y104.446 G1 X122.172 Y104.41 G1 X122.193 Y104.374 G1 X122.216 Y104.338 G1 X122.239 Y104.304 G1 X122.264 Y104.269 G1 X122.288 Y104.235 G1 X122.314 Y104.202 G1 X122.34 Y104.169 G1 X122.367 Y104.137 G1 X122.713 Y103.74 G1 X123.063 Y103.494 G1 X124.322 Y103.34 G1 X124.712 Y103.542 G1 X124.843 Y103.732 G1 X124.9 Y104.201 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Outer wall ;WIDTH:0.574558 G1 F2700 G1 X124.834 Y104.201 E.00294 G1 X124.8 Y104.258 E.00294 G1 X124.834 Y104.316 E.00294 G1 X124.9 Y104.316 E.00294 G1 X124.933 Y104.258 E.00294 ;PATH_TASK id=168 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X124.843 Y103.732 Z.8 F21000 G1 X124.712 Y103.542 G1 X124.322 Y103.34 G1 X123.063 Y103.494 G1 X122.713 Y103.74 G1 X122.367 Y104.137 G1 X122.34 Y104.169 G1 X122.314 Y104.202 G1 X122.288 Y104.235 G1 X122.264 Y104.269 G1 X122.239 Y104.304 G1 X122.216 Y104.338 G1 X122.193 Y104.374 G1 X122.172 Y104.41 G1 X122.15 Y104.446 G1 X121.649 Y105.542 G1 X122.138 Y106.698 G1 X122.143 Y106.709 G1 X122.157 Y106.738 G1 X122.164 Y106.749 G1 X122.187 Y106.787 G1 X122.211 Y106.825 G1 X122.236 Y106.862 G1 X122.262 Y106.898 G1 X122.289 Y106.934 G1 X122.316 Y106.969 G1 X122.344 Y107.004 G1 X122.643 Y107.358 G1 X122.718 Y107.422 G1 X123.128 Y107.622 G1 X123.553 Y107.681 G1 X123.595 Y107.687 G1 X123.638 Y107.691 G1 X123.68 Y107.695 G1 X124.232 Y107.738 G1 X124.708 Y107.6 G1 X124.768 Y107.557 G1 X124.769 Y107.493 G1 X124.79 Y107.485 G1 X124.812 Y106.724 G1 Z.2 F720 G1 E.7 F1500 ;WIDTH:0.355829 G1 F2700 G1 X124.992 Y106.953 E.00758 ;PATH_TASK id=169 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.395587 G1 X124.985 Y107.039 E.00252 ;PATH_TASK id=170 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.435345 G1 X124.979 Y107.124 E.0028 ;PATH_TASK id=171 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.475102 G1 X124.972 Y107.21 E.00308 ;PATH_TASK id=172 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X125.08 Y107.302 E.00539 G1 X125.573 Y107.619 E.02228 G1 X126.162 Y107.703 E.02262 G1 X126.716 Y107.622 E.02125 G1 X127.211 Y107.391 E.02078 G1 X127.616 Y107.034 E.02051 G1 X127.919 Y106.556 E.02149 G1 X128.081 Y105.992 E.02231 G1 X128.104 Y105.432 E.02132 G1 X127.997 Y104.853 E.02237 G1 X127.746 Y104.344 E.02157 G1 X127.368 Y103.937 E.0211 G1 X126.935 Y103.67 E.01933 G1 X126.425 Y103.532 E.02011 G1 X126.159 Y103.512 E.01013 G1 X125.602 Y103.6 E.02143 G1 X125.413 Y103.695 E.00804 G1 X124.993 Y104.009 E.01993 ;PATH_TASK id=173 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.537279 G1 X124.93 Y104.133 E.00574 ;PATH_TASK id=174 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.574558 G1 X124.867 Y104.258 E.00618 ;PATH_TASK id=175 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X124.823 Y104.172 E.00426 ;PATH_TASK id=176 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.537279 G1 X124.779 Y104.087 E.00396 ;PATH_TASK id=177 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X124.712 Y104.024 E.00346 G1 X124.115 Y103.709 E.02566 G1 X123.524 Y103.711 E.02248 G1 X123.03 Y103.892 E.01999 G1 X122.614 Y104.218 E.0201 G1 X122.309 Y104.655 E.02023 G1 X122.146 Y105.145 E.01965 G1 X122.106 Y105.668 E.01992 G1 X122.186 Y106.203 E.02057 G1 X122.393 Y106.668 E.01935 G1 X122.745 Y107.071 E.02034 G1 X123.193 Y107.341 E.01989 G1 X123.675 Y107.446 E.01874 G1 X124.111 Y107.425 E.01658 G1 X124.566 Y107.216 E.01905 G1 X124.587 Y107.157 E.00238 ;PATH_TASK id=178 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.451771 G1 X124.607 Y107.097 E.00213 ;PATH_TASK id=179 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.403543 G1 X124.627 Y107.038 E.00188 ;PATH_TASK id=168 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.355829 G1 X124.606 Y106.925 E.003 G1 X124.784 Y106.752 E.00645 ;PATH_TASK id=180 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X124.79 Y107.485 Z.8 F21000 G1 X124 Y115.759 G1 X124 Y116.002 G1 X124.132 Y116.002 G1 Z.2 F720 G1 E.7 F1500 ;WIDTH:0.555537 G1 F2700 G1 X123.895 Y115.932 E.01051 G1 X123.589 Y115.793 E.01433 G1 X123.377 Y115.487 E.01588 ;PATH_TASK id=181 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.562916 G1 X123.323 Y115.212 E.01212 G1 X123.355 Y114.935 E.01206 ;PATH_TASK id=182 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.559399 G1 X123.508 Y114.693 E.01228 ;PATH_TASK id=183 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.577592 G1 X123.818 Y114.619 E.01413 ;PATH_TASK id=184 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.598084 G1 X123.971 Y114.533 E.00814 ;PATH_TASK id=185 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X123.927 Y114.711 E.00849 ;PATH_TASK id=186 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.577592 G1 X123.888 Y115.289 E.02572 ;PATH_TASK id=180 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.555537 G1 X124.023 Y115.808 E.02288 G1 X124.112 Y115.967 E.00776 ;PATH_TASK id=187 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X124 Y115.967 Z.8 F21000 G1 X123.661 Y113.729 G1 X123.61 Y113.504 G1 X124.29 Y113.351 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.499999 G1 F2700 G1 X124.062 Y113.047 E.01444 G1 X123.838 Y112.914 E.00991 G1 X123.564 Y112.875 E.01049 G1 X122.982 Y112.962 E.02238 G1 X122.724 Y113.058 E.01046 G1 X122.291 Y113.327 E.01936 G1 X122.119 Y113.48 E.00875 G1 X121.728 Y114.02 E.02531 ;PATH_TASK id=188 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.531925 G1 X121.604 Y114.336 E.01384 ;PATH_TASK id=189 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.563851 G1 X121.48 Y114.653 E.01474 G1 X121.45 Y115.332 E.02943 ;PATH_TASK id=190 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.582861 G1 X121.507 Y115.838 E.02288 G1 X121.547 Y115.929 E.00445 ;PATH_TASK id=191 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.556286 G1 X121.588 Y116.019 E.00423 ;PATH_TASK id=192 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.52971 G1 X121.911 Y116.626 E.02779 ;PATH_TASK id=193 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X122.376 Y117.125 E.02594 G1 X122.965 Y117.493 E.02638 G1 X123.563 Y117.709 E.02416 G1 X124.142 Y117.826 E.02247 G1 X124.794 Y117.887 E.02489 G1 X125.425 Y117.89 E.02398 G1 X126.14 Y117.812 E.02732 ;PATH_TASK id=194 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X126.733 Y117.655 E.02334 G1 X127.363 Y117.33 E.02695 G1 X127.86 Y116.865 E.02585 G1 X128.22 Y116.268 E.02651 ;PATH_TASK id=195 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.536214 G1 X128.297 Y116.048 E.00956 ;PATH_TASK id=196 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.572429 G1 X128.374 Y115.828 E.01026 ;PATH_TASK id=197 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.608643 G1 X128.452 Y115.608 E.01096 ;PATH_TASK id=198 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.613164 G1 X128.452 Y114.881 E.03451 G1 X128.371 Y114.662 E.01107 ;PATH_TASK id=199 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.575443 G1 X128.29 Y114.443 E.01034 ;PATH_TASK id=200 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.537721 G1 X128.209 Y114.224 E.0096 ;PATH_TASK id=187 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X127.854 Y113.662 E.02526 G1 X127.355 Y113.219 E.02536 G1 X126.755 Y112.919 E.0255 G1 X126.265 Y112.792 E.01926 G1 X125.87 Y112.751 E.0151 G1 X125.395 Y112.793 E.01812 G1 X125.049 Y112.865 E.01343 G1 X124.573 Y113.088 E.01999 G1 X124.319 Y113.324 E.01314 ;PATH_TASK id=201 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X123.606 Y113.485 Z.8 F21000 G1 X123.661 Y113.729 G1 X123.667 Y113.831 G1 X123.691 Y114.225 G1 X123.96 Y114.209 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Outer wall ;WIDTH:0.524355 G1 F2700 G1 X123.908 Y113.645 E.02267 ;PATH_TASK id=202 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X123.721 Y113.387 E.01211 G1 X123.575 Y113.355 E.00568 G1 X122.977 Y113.464 E.02311 G1 X122.492 Y113.78 E.02197 G1 X122.175 Y114.191 E.01973 G1 X121.989 Y114.699 E.02057 G1 X121.945 Y115.257 E.02128 G1 X122.037 Y115.815 E.0215 G1 X122.272 Y116.312 E.02089 G1 X122.64 Y116.725 E.02102 G1 X123.092 Y117.024 E.0206 G1 X123.626 Y117.231 E.02174 G1 X124.237 Y117.357 E.02372 G1 X124.835 Y117.41 E.02281 G1 X125.425 Y117.411 E.02244 G1 X125.978 Y117.358 E.0211 ;PATH_TASK id=203 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X126.53 Y117.223 E.02159 G1 X127.049 Y116.969 E.02197 G1 X127.46 Y116.602 E.02095 G1 X127.762 Y116.128 E.02135 G1 X127.919 Y115.59 E.02131 G1 X127.932 Y115.005 E.02224 G1 X127.794 Y114.462 E.02129 G1 X127.524 Y114.008 E.02007 G1 X127.129 Y113.641 E.0205 G1 X126.635 Y113.382 E.02118 G1 X126.145 Y113.255 E.01926 G1 X125.834 Y113.228 E.01186 G1 X125.292 Y113.287 E.02072 G1 X124.829 Y113.492 E.01923 G1 X124.468 Y113.867 E.01979 ;PATH_TASK id=204 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.546956 G1 X124.231 Y114.179 E.01642 ;PATH_TASK id=205 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.593912 G1 X123.993 Y114.49 E.01795 G1 X123.977 Y114.349 E.0065 ;PATH_TASK id=206 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.559134 G1 X123.965 Y114.248 E.00437 ;PATH_TASK id=207 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X123.694 Y114.265 Z.8 F21000 G1 X123.661 Y113.729 G1 X123.509 Y113.057 G1 X123.468 Y113.063 G1 X122.862 Y113.163 G1 X122.442 Y113.506 G1 X122.41 Y113.532 G1 X122.379 Y113.56 G1 X122.348 Y113.588 G1 X122.318 Y113.617 G1 X122.288 Y113.646 G1 X122.259 Y113.677 G1 X122.239 Y113.699 G1 X122.233 Y113.707 G1 X122.199 Y113.768 G1 X122.181 Y113.803 G1 X122.163 Y113.838 G1 X122.145 Y113.874 G1 X122.128 Y113.91 G1 X122.112 Y113.946 G1 X122.097 Y113.982 G1 X122.082 Y114.018 G1 X122.067 Y114.054 G1 X122.054 Y114.09 G1 X122.04 Y114.127 G1 X122.028 Y114.163 G1 X121.68 Y115.225 G1 X121.9 Y116.06 G1 X122.204 Y116.611 G1 X122.211 Y116.623 G1 X126.197 Y122.723 G1 X126.772 Y122.733 G1 X127.956 Y123.43 G1 X127.944 Y124.216 G1 X127.924 Y125.413 G1 X126.726 Y125.424 G1 X126.723 Y125.636 G1 X126.966 Y125.64 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.499999 G1 F2700 G1 X127.693 Y125.618 E.02767 G1 X128.008 Y125.411 E.0143 G1 X128.121 Y125.172 E.01007 ;PATH_TASK id=208 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.547254 G1 X128.166 Y125.131 E.00254 ;PATH_TASK id=209 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.594509 G1 X128.211 Y125.09 E.00278 ;PATH_TASK id=210 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.636219 G1 X128.235 Y125.033 E.00304 ;PATH_TASK id=211 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.677928 G1 X128.26 Y124.977 E.00326 ;PATH_TASK id=212 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.719637 G1 X128.285 Y124.92 E.00347 G1 X128.298 Y123.864 E.05947 ;PATH_TASK id=213 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.71068 G1 X128.236 Y123.766 E.00642 ;PATH_TASK id=214 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.668544 G1 X128.174 Y123.668 E.00602 ;PATH_TASK id=215 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.626408 G1 X128.112 Y123.57 E.00561 ;PATH_TASK id=216 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.584272 G1 X128.05 Y123.473 E.00521 ;PATH_TASK id=217 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.542136 G1 X127.988 Y123.375 E.0048 ;PATH_TASK id=218 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X127.578 Y123.182 E.01723 G1 X127.005 Y123.169 E.02181 G1 X126.915 Y122.823 E.01358 G1 X126.628 Y122.555 E.01494 G1 X126.405 Y122.487 E.00886 G1 X125.677 Y122.471 E.02766 G1 X125.176 Y122.471 E.01904 G1 X124.927 Y122.558 E.01002 G1 X124.722 Y122.743 E.01052 G1 X124.591 Y123.128 E.01544 G1 X122.034 Y123.085 E.09721 G1 X121.622 Y123.213 E.0164 G1 X121.349 Y123.759 E.02318 ;PATH_TASK id=219 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.475621 G1 X121.345 Y124.757 E.03591 ;PATH_TASK id=220 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X121.603 Y125.194 E.01932 G1 X125.031 Y127.691 E.16116 ;PATH_TASK id=207 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X125.277 Y127.776 E.00991 G1 X126.243 Y127.797 E.03672 M73 P80 R7 G1 X126.561 Y127.725 E.01241 G1 X126.739 Y127.597 E.00832 G1 X126.882 Y127.389 E.00957 G1 X126.94 Y127.123 E.01036 G1 X126.965 Y125.68 E.05486 ;PATH_TASK id=221 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X126.495 Y125.153 F21000 ;TYPE:Outer wall G1 F2700 G1 X127.485 Y125.17 E.03763 G1 X127.645 Y125.098 E.00668 G1 X127.693 Y124.999 E.00418 G1 X127.714 Y123.867 E.04303 G1 X127.653 Y123.716 E.0062 G1 X127.542 Y123.659 E.00474 G1 X126.521 Y123.64 E.0388 G1 X126.501 Y123.064 E.0219 G1 X126.347 Y122.962 E.00701 G1 X125.376 Y122.945 E.03692 G1 X125.164 Y122.974 E.00813 G1 X125.066 Y123.147 E.00752 G1 X125.058 Y123.615 E.0178 G1 X122.026 Y123.563 E.11527 G1 X121.902 Y123.602 E.00495 G1 X121.815 Y123.767 E.00706 G1 X121.8 Y124.637 E.03308 G1 X121.885 Y124.808 E.00725 G1 X125.3 Y127.3 E.16065 G1 X126.251 Y127.319 E.03618 G1 X126.401 Y127.258 E.00614 G1 X126.459 Y127.147 E.00475 G1 X126.495 Y125.193 E.07428 ;PATH_TASK id=222 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X126.67 Y125.392 Z.8 F21000 G1 X126.726 Y125.424 G1 X127.803 Y132.489 G1 X127.751 Y135.586 G1 X127.665 Y135.927 G1 X127.375 Y136.806 G1 X126.863 Y136.986 G1 X126.275 Y136.748 G1 X125.666 Y136.447 G1 X125.657 Y136.442 G1 X125.194 Y136.051 G1 X124.955 Y136.267 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Inner wall G1 F2700 G1 X125.33 Y136.648 E.0203 G1 X125.876 Y137.049 E.02575 G1 X126.344 Y137.247 E.01932 ;PATH_TASK id=223 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.455515 G1 X126.433 Y137.26 E.00308 ;PATH_TASK id=224 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.42583 G1 X126.521 Y137.273 E.00286 ;PATH_TASK id=225 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.396145 G1 X127.274 Y137.33 E.02218 ;PATH_TASK id=226 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.404055 G1 X127.434 Y137.294 E.0049 ;PATH_TASK id=227 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.452027 G1 X127.593 Y137.258 E.00556 ;PATH_TASK id=228 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X127.752 Y137.222 E.00621 G1 X127.956 Y136.875 E.01528 G1 X127.974 Y136.728 E.00562 G1 X128.038 Y132.936 E.14415 G1 X127.908 Y132.522 E.01651 G1 X127.624 Y132.295 E.0138 G1 X127.359 Y132.239 E.0103 G1 X126.289 Y132.229 E.04067 G1 X126.014 Y132.284 E.01066 ;PATH_TASK id=229 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X125.75 Y132.484 E.01259 G1 X125.598 Y132.892 E.01653 G1 X125.615 Y133.341 E.01711 G1 X125.326 Y133.013 E.01664 G1 X124.799 Y132.594 E.02558 G1 X124.158 Y132.292 E.02692 G1 X123.543 Y132.183 E.02377 G1 X122.915 Y132.246 E.02399 G1 X122.7 Y132.305 E.00845 G1 X122.126 Y132.601 E.02456 G1 X121.629 Y133.084 E.02636 G1 X121.311 Y133.663 E.0251 G1 X121.277 Y133.886 E.00858 ;PATH_TASK id=230 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.461096 G1 X121.244 Y134.11 E.00785 ;PATH_TASK id=231 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.422193 G1 X121.21 Y134.333 E.00712 ;PATH_TASK id=232 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.383289 G1 X121.205 Y134.971 E.01807 ;PATH_TASK id=233 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.421394 G1 X121.216 Y135.142 E.00537 ;PATH_TASK id=234 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.460697 G1 X121.226 Y135.312 E.00593 ;PATH_TASK id=235 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X121.237 Y135.483 E.00649 G1 X121.292 Y135.655 E.00689 G1 X121.608 Y136.256 E.02579 G1 X122.077 Y136.728 E.02532 G1 X122.679 Y137.051 E.02594 G1 X123.22 Y137.173 E.02109 ;PATH_TASK id=236 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.468139 G1 X123.69 Y137.214 E.01669 ;PATH_TASK id=237 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.46674 G1 X123.888 Y137.168 E.00714 ;PATH_TASK id=238 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499653 G1 X124.085 Y137.121 E.0077 ;PATH_TASK id=222 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X124.333 Y136.801 E.01539 G1 X124.371 Y136.643 E.00619 G1 X124.482 Y135.714 E.03555 G1 X124.859 Y136.169 E.02245 G1 X124.927 Y136.238 E.00368 ;PATH_TASK id=239 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X125.194 Y136.051 Z.8 F21000 G1 X125.657 Y136.442 G1 X125.666 Y136.447 G1 X126.275 Y136.748 G1 X126.863 Y136.986 G1 X127.375 Y136.806 G1 X127.665 Y135.927 G1 X127.751 Y135.586 G1 X127.803 Y132.489 G1 X126.626 Y132.469 G1 X126.355 Y132.987 G1 X126.484 Y135.049 G1 X126.345 Y135.174 G1 X126.214 Y135.028 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Outer wall G1 F2700 G1 X125.743 Y134.484 E.02735 G1 X125.432 Y133.87 E.02616 G1 X125.019 Y133.38 E.02437 G1 X124.58 Y133.019 E.0216 G1 X124.062 Y132.761 E.02197 G1 X123.536 Y132.662 E.02037 G1 X122.899 Y132.74 E.02436 G1 X122.444 Y132.958 E.01919 G1 X122.038 Y133.333 E.021 G1 X121.773 Y133.786 E.01995 G1 X121.63 Y134.346 E.02196 G1 X121.618 Y134.898 E.02098 G1 X121.724 Y135.451 E.02141 G1 X121.963 Y135.935 E.02053 G1 X122.32 Y136.316 E.01983 G1 X122.798 Y136.587 E.02088 G1 X123.335 Y136.725 E.02108 G1 X123.666 Y136.767 E.01266 G1 X123.81 Y136.73 E.00565 G1 X123.884 Y136.634 E.00465 G1 X123.943 Y136.19 E.017 ;PATH_TASK id=240 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.549184 G1 X124.023 Y135.315 E.03699 G1 X123.903 Y135.235 E.00607 ;PATH_TASK id=241 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.517308 G1 X123.466 Y135.194 E.01732 ;PATH_TASK id=242 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X123.182 Y135.093 E.01147 G1 X123.072 Y134.951 E.00682 G1 X123.038 Y134.781 E.00658 G1 X123.067 Y134.44 E.013 G1 X123.19 Y134.279 E.0077 G1 X123.349 Y134.203 E.0067 G1 X123.566 Y134.213 E.00827 G1 X123.882 Y134.376 E.01349 ;PATH_TASK id=243 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.517308 G1 X124.256 Y134.73 E.02032 G1 X124.725 Y135.258 E.02787 ;PATH_TASK id=244 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.50314 G1 X125.193 Y135.825 E.02813 ;PATH_TASK id=245 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X125.598 Y136.248 E.02224 G1 X126.045 Y136.594 E.02147 G1 X126.54 Y136.835 E.02095 G1 X126.95 Y136.914 E.01584 G1 X127.284 Y136.924 E.01271 G1 X127.429 Y136.869 E.00588 G1 X127.49 Y136.765 E.00461 G1 X127.56 Y132.928 E.14584 G1 X127.521 Y132.803 E.00499 G1 X127.355 Y132.717 E.00709 G1 X126.801 Y132.712 E.02106 G1 X126.216 Y132.719 E.02221 ;PATH_TASK id=239 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X126.135 Y132.77 E.00364 G1 X126.076 Y132.908 E.00571 G1 X126.111 Y133.684 E.02951 G1 X126.239 Y134.615 E.03574 G1 X126.216 Y134.988 E.01422 ;PATH_TASK id=246 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X126.367 Y135.155 Z.8 F21000 G1 X124.699 Y133.098 G1 X123.887 Y132.324 G1 X122.895 Y132.357 G1 X122.384 Y132.716 G1 X122.375 Y132.724 G1 X122.344 Y132.759 G1 X122.314 Y132.793 G1 X122.285 Y132.829 G1 X122.256 Y132.864 G1 X122.229 Y132.9 G1 X122.203 Y132.937 G1 X122.177 Y132.973 G1 X122.153 Y133.01 G1 X122.129 Y133.047 G1 X122.106 Y133.085 G1 X122.066 Y133.153 G1 X122.049 Y133.184 G1 X122.027 Y133.224 G1 X122.005 Y133.266 G1 X121.985 Y133.308 G1 X121.965 Y133.35 G1 X121.946 Y133.392 G1 X121.929 Y133.434 G1 X121.912 Y133.476 G1 X121.896 Y133.518 G1 X121.881 Y133.56 G1 X121.866 Y133.602 G1 X121.853 Y133.645 G1 X121.84 Y133.687 G1 X121.828 Y133.73 G1 X121.817 Y133.772 G1 X121.806 Y133.815 G1 X121.796 Y133.857 G1 X121.787 Y133.9 G1 X121.779 Y133.943 G1 X121.587 Y135 G1 X121.89 Y135.835 G1 X121.905 Y135.875 G1 X121.92 Y135.915 G1 X121.936 Y135.954 G1 X121.953 Y135.994 G1 X121.971 Y136.033 G1 X121.99 Y136.073 G1 X122.01 Y136.112 G1 X122.025 Y136.142 G1 X122.041 Y136.172 G1 X122.061 Y136.21 G1 X122.085 Y136.25 G1 X122.109 Y136.289 G1 X122.134 Y136.329 G1 X122.16 Y136.368 G1 X122.168 Y136.378 G1 X122.194 Y136.399 G1 X122.29 Y136.462 G1 X122.544 Y136.547 G1 X122.586 Y136.561 G1 X122.629 Y136.575 G1 X122.672 Y136.587 G1 X122.715 Y136.599 G1 X122.758 Y136.61 G1 X122.802 Y136.62 G1 X122.85 Y136.631 G1 X122.904 Y136.642 G1 X122.958 Y136.652 G1 X123.012 Y136.661 G1 X123.779 Y136.78 G1 X123.783 Y136.68 G1 X123.8 Y136.223 G1 X123.685 Y135.553 G1 X123.105 Y134.996 G1 X123.099 Y134.992 G1 X123.102 Y134.99 G1 X123.539 Y134.671 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.494412 G1 F2700 G1 X123.483 Y134.671 E.00212 G1 X123.455 Y134.72 E.00212 G1 X123.483 Y134.769 E.00212 G1 X123.539 Y134.769 E.00212 G1 X123.568 Y134.72 E.00212 ;PATH_TASK id=247 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X123.102 Y134.99 Z.8 F21000 G1 X125.666 Y136.447 G1 X126.275 Y136.748 G1 X126.863 Y136.986 G1 X127.313 Y136.805 G1 X129.314 Y137.814 G1 X129.55 Y138.05 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Outer wall ;WIDTH:0.499999 G1 F2700 G1 X120.45 Y138.05 E.34586 G1 X120.45 Y81.95 E2.13215 G1 X129.55 Y81.95 E.34586 G1 X129.55 Y138.01 E2.13063 ;PATH_TASK id=248 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X124.554 Y136.275 Z.8 F21000 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Bottom surface ;WIDTH:0.546432 G1 F6000 G1 X125.481 Y137.202 E.0549 G1 X125.472 Y137.229 E.00119 G1 X124.796 Y137.229 E.0283 G1 X124.439 Y136.871 E.02117 ;PATH_TASK id=249 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z.8 F720 G1 X121.212 Y136.226 Z.8 F21000 G1 Z.2 F720 G1 E.7 F1500 ;WIDTH:0.591415 G1 F6000 G1 X122.192 Y137.205 E.06318 G1 X122.185 Y137.229 E.00111 G1 X121.44 Y137.229 E.03402 G1 X121.066 Y136.855 E.02412 ;PATH_TASK id=250 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z.8 F720 G1 X120.638 Y136.954 Z.8 F21000 G1 X129.314 Y137.814 G1 X129.314 Y126.01 G1 X128.934 Y126.01 G1 Z.2 F720 G1 E.7 F1500 ;WIDTH:0.514442 G1 F6000 G1 X128.364 Y125.44 E.0316 G1 X128.27 Y125.638 E.00861 G1 X128.044 Y125.787 E.01059 G1 X128.729 Y126.471 E.03794 G1 X128.729 Y127.138 E.02614 G1 X127.57 Y125.979 E.06426 G1 X127.48 Y125.992 E.00354 G1 X127.303 Y125.989 E.00697 G1 X127.296 Y126.372 E.01502 G1 X128.729 Y127.804 E.07944 G1 X128.729 Y128.471 E.02614 G1 X127.285 Y127.027 E.08006 G1 X127.283 Y127.134 E.00417 G1 X127.268 Y127.292 E.00623 G1 X127.195 Y127.532 E.00985 G1 X127.165 Y127.575 E.00203 G1 X128.729 Y129.138 E.08668 G1 X128.729 Y129.805 E.02614 G1 X126.856 Y127.932 E.10385 G1 X126.717 Y128.032 E.00671 G1 X126.458 Y128.121 E.01074 G1 X126.385 Y128.128 E.00285 G1 X128.729 Y130.472 E.12993 G1 X128.729 Y131.139 E.02614 G1 X125.721 Y128.131 E.16677 G1 X125.353 Y128.125 E.01444 G3 X125.115 Y128.093 I.037 J-1.159 E.00942 G1 X124.964 Y128.041 E.00626 G1 X128.729 Y131.805 E.20875 G1 X128.729 Y132.472 E.02614 G1 X122.61 Y126.353 E.33928 G1 X121.382 Y125.457 E.05961 G1 X121.298 Y125.312 E.00653 G1 X121.264 Y125.322 E.0014 G1 X121.271 Y125.535 E.00835 G1 X121.271 Y125.682 E.00575 G1 X128.934 Y133.345 E.42489 ;PATH_TASK id=251 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X128.17 Y133.247 F21000 G1 F6000 G1 X128.729 Y133.806 E.03097 G1 X128.729 Y134.473 E.02614 G1 X128.361 Y134.106 E.02036 G1 X128.35 Y134.761 E.02571 G1 X128.729 Y135.14 E.02098 G1 X128.729 Y135.806 E.02614 G1 X128.339 Y135.417 E.02159 G1 X128.328 Y136.073 E.02571 G1 X128.729 Y136.473 E.02221 G1 X128.729 Y137.14 E.02614 G1 X128.317 Y136.728 E.02282 G1 X128.296 Y136.952 E.0088 G1 X128.14 Y137.218 E.01211 G1 X128.356 Y137.434 E.01197 ;PATH_TASK id=252 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z.8 F720 G1 X128.496 Y137.935 Z.8 F21000 G1 X127.803 Y132.489 G1 X127.015 Y132.476 G1 X127.022 Y132.099 G1 Z.2 F720 G1 E.7 F1500 G1 F6000 G1 X121.271 Y126.349 E.31884 G1 X121.271 Y127.015 E.02614 G1 X126.152 Y131.896 E.27062 G1 X126.121 Y131.899 E.00121 G1 X125.955 Y131.94 E.00673 G2 X125.767 Y132.025 I.376 J1.082 E.00809 G1 X125.681 Y132.091 E.00427 G1 X121.271 Y127.682 E.24448 G1 X121.271 Y128.349 E.02614 G1 X125.379 Y132.457 E.22778 G1 X125.342 Y132.58 E.00502 G1 X125.142 Y132.412 E.01023 G1 X125.043 Y132.339 E.00481 G1 X124.959 Y132.29 E.00383 G1 X124.491 Y132.049 E.02065 G2 X124.207 Y131.952 I-.498 J.993 E.0118 G1 X121.271 Y129.016 E.16278 G1 X121.271 Y129.683 E.02614 G1 X123.436 Y131.847 E.12 G1 X122.87 Y131.906 E.02231 G1 X122.837 Y131.915 E.00134 G1 X121.271 Y130.35 E.0868 G1 X121.271 Y131.016 E.02614 G1 X122.345 Y132.09 E.05954 G1 X122.146 Y132.181 E.00858 G1 X121.918 Y132.33 E.01067 G1 X121.271 Y131.683 E.03587 G1 X121.271 Y132.35 E.02614 G1 X121.71 Y132.788 E.0243 ;PATH_TASK id=253 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z.8 F720 G1 X122.129 Y133.047 Z.8 F21000 G1 X121.808 Y124.74 G1 X121.824 Y123.565 G1 X124.838 Y122.7 G1 X125.765 Y122.716 G1 X128.01 Y116.193 G1 X128.319 Y116.373 G1 Z.2 F720 G1 E.7 F1500 ;WIDTH:0.511247 G1 F6000 G1 X128.729 Y116.783 E.02256 G1 X128.729 Y117.445 E.02579 G1 X128.222 Y116.938 E.02792 G1 X128.141 Y117.06 E.00568 G1 X127.968 Y117.258 E.01026 G1 X127.921 Y117.3 E.00245 G1 X128.729 Y118.108 E.0445 G1 X128.729 Y118.77 E.02579 G1 X127.564 Y117.606 E.06412 G1 X127.358 Y117.74 E.00957 G1 X127.139 Y117.843 E.00943 G1 X128.729 Y119.432 E.08752 G1 X128.729 Y120.095 E.02579 G1 X126.671 Y118.038 E.11329 G1 X126.185 Y118.154 E.01947 G1 X126.135 Y118.163 E.002 G1 X128.729 Y120.757 E.14284 G1 X128.729 Y121.419 E.02579 G1 X125.536 Y118.227 E.17583 G1 X125.427 Y118.233 E.00424 G1 X124.879 Y118.232 E.02135 G1 X128.729 Y122.082 E.21201 G1 X128.729 Y122.744 E.02579 G1 X124.16 Y118.175 E.25163 G1 X124.077 Y118.163 E.00325 G1 X123.49 Y118.044 E.02332 G1 X123.34 Y118.001 E.00606 G1 X123.313 Y117.991 E.00114 G1 X128.638 Y123.315 E.29324 G1 X128.575 Y123.595 E.01116 G1 X128.225 Y123.123 E.02291 G1 X127.68 Y122.845 E.02381 G1 X127.527 Y122.835 E.00596 G1 X127.495 Y122.835 E.00126 G1 X121.274 Y116.614 E.34261 G1 X121.271 Y116.654 E.00156 G1 X121.271 Y117.274 E.02414 G1 X126.134 Y122.136 E.26779 G1 X125.46 Y122.125 E.02624 G1 X121.271 Y117.936 E.23069 G1 X121.271 Y118.598 E.02579 G1 X124.876 Y122.203 E.19851 G1 X124.861 Y122.208 E.0006 G1 X124.757 Y122.261 E.00458 G1 X124.727 Y122.279 E.00132 G1 X124.645 Y122.336 E.00392 G1 X124.497 Y122.486 E.00821 G1 X121.271 Y119.261 E.17764 G1 X121.271 Y119.923 E.02579 G1 X124.126 Y122.777 E.15721 G1 X123.452 Y122.766 E.02624 G1 X121.271 Y120.585 E.1201 G1 X121.271 Y121.247 E.02579 G1 X122.778 Y122.755 E.083 G1 X122.105 Y122.743 E.02624 G1 X121.271 Y121.91 E.04589 G1 X121.271 Y122.572 E.02579 G1 X121.743 Y123.044 E.02599 ;PATH_TASK id=254 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z.8 F720 G1 X121.859 Y123.557 Z.8 F21000 G1 X127.653 Y116.741 G1 X127.687 Y116.7 G1 X127.719 Y116.659 G1 X127.751 Y116.617 G1 X127.781 Y116.574 G1 X127.811 Y116.53 G1 X127.832 Y116.498 G1 X127.839 Y116.486 G1 X128.059 Y116.111 G1 X128.384 Y115.179 G1 X127.837 Y114.04 G1 X127.82 Y114.011 G1 X127.813 Y114 G1 X127.786 Y113.961 G1 X127.759 Y113.923 G1 X127.73 Y113.885 G1 X127.701 Y113.849 G1 X127.671 Y113.812 G1 X127.639 Y113.777 G1 X127.608 Y113.742 G1 X127.575 Y113.708 G1 X127.542 Y113.675 G1 X127.19 Y113.339 G1 X127.04 Y113.255 G1 X126.403 Y113.032 G1 X129.327 Y107.635 G1 X128.934 Y107.595 G1 Z.2 F720 G1 E.7 F1500 ;WIDTH:0.500926 G1 F6000 G1 X128.509 Y107.169 E.0229 G1 X128.299 Y107.491 E.01463 G1 X128.244 Y107.552 E.00312 G1 X128.729 Y108.037 E.02608 G1 X128.729 Y108.684 E.02467 G1 X127.914 Y107.87 E.04386 G1 X127.738 Y108.02 E.00882 G1 X127.542 Y108.145 E.00887 G1 X128.729 Y109.332 E.06394 G1 X128.729 Y109.98 E.02467 G1 X127.099 Y108.35 E.08778 G1 X127.044 Y108.375 E.00231 G1 X126.773 Y108.451 E.01069 G1 X126.578 Y108.477 E.0075 G1 X128.729 Y110.627 E.11582 G1 X128.729 Y111.275 E.02467 G1 X125.966 Y108.512 E.1488 G1 X125.444 Y108.43 E.02012 G3 X125.24 Y108.376 I.209 J-1.196 E.00805 G1 X125.15 Y108.337 E.00375 G1 X125.131 Y108.325 E.00085 G1 X128.729 Y111.923 E.19378 G1 X128.729 Y112.571 E.02467 G1 X124.362 Y108.204 E.23517 G1 X124.265 Y108.237 E.00392 M73 P81 R7 G1 X124.147 Y108.258 E.00453 G1 X124.048 Y108.265 E.00381 G1 X123.78 Y108.27 E.01017 G1 X128.729 Y113.218 E.2665 G1 X128.729 Y113.866 E.02467 G1 X122.997 Y108.134 E.30872 G1 X122.791 Y108.057 E.00836 G1 X122.377 Y107.818 E.01821 G1 X122.143 Y107.629 E.01146 G1 X121.813 Y107.265 E.01869 G1 X121.654 Y107.025 E.01095 G1 X121.425 Y106.638 E.01714 G1 X121.359 Y106.565 E.00375 G1 X121.316 Y106.668 E.00428 G1 X121.275 Y107.061 E.01502 G1 X126.788 Y112.573 E.2969 G1 X126.306 Y112.449 E.01896 G2 X126.19 Y112.432 I-.213 J1.009 E.00447 G1 X125.983 Y112.416 E.0079 G1 X121.271 Y107.704 E.25377 G1 X121.271 Y108.352 E.02467 G1 X125.37 Y112.45 E.22074 G1 X125.214 Y112.468 E.00597 G1 X125.133 Y112.481 E.00313 G1 X125.035 Y112.505 E.00383 G2 X124.85 Y112.579 I.462 J1.425 E.00759 G1 X121.271 Y109 E.19276 G1 X121.271 Y109.647 E.02467 G1 X124.411 Y112.787 E.16908 G1 X124.386 Y112.8 E.00105 G1 X124.335 Y112.841 E.0025 G1 X124.292 Y112.792 E.0025 G1 X124.172 Y112.7 E.00573 G1 X123.958 Y112.593 E.00913 G2 X123.761 Y112.543 I-.375 J1.06 E.00776 G1 X123.661 Y112.533 E.00384 G1 X123.544 Y112.533 E.00444 G1 X123.513 Y112.536 E.00119 G1 X121.271 Y110.295 E.12071 G1 X121.271 Y110.943 E.02467 G1 X122.949 Y112.62 E.09036 G1 X122.918 Y112.625 E.00119 G1 X122.552 Y112.761 E.01486 G1 X122.484 Y112.803 E.00305 G1 X121.271 Y111.59 E.06532 G1 X121.271 Y112.238 E.02467 G1 X122.087 Y113.054 E.04395 G1 X121.858 Y113.258 E.0117 G1 X121.762 Y113.377 E.0058 G1 X121.271 Y112.886 E.02645 G1 X121.271 Y113.534 E.02467 G1 X121.64 Y113.903 E.01988 ;PATH_TASK id=255 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z.8 F720 G1 X122.067 Y114.054 Z.8 F21000 G1 X125.215 Y107.767 G1 X125.245 Y107.852 G1 X125.547 Y107.973 G1 X125.615 Y107.998 G1 X126.548 Y108.044 G1 X126.779 Y107.961 G1 X127.118 Y107.805 G1 X127.214 Y107.747 G1 X127.618 Y107.373 G1 X127.653 Y107.34 G1 X127.688 Y107.306 G1 X127.716 Y107.277 G1 X127.743 Y107.248 G1 X127.765 Y107.224 G1 X127.772 Y107.213 G1 X127.794 Y107.172 G1 X127.816 Y107.131 G1 X128.451 Y105.897 G1 X127.977 Y104.463 G1 X127.962 Y104.418 G1 X127.945 Y104.374 G1 X127.928 Y104.329 G1 X127.91 Y104.284 G1 X127.891 Y104.239 G1 X127.871 Y104.195 G1 X127.85 Y104.15 G1 X127.829 Y104.106 G1 X127.806 Y104.061 G1 X127.776 Y104.006 G1 X127.755 Y103.976 G1 X127.746 Y103.967 G1 X127.716 Y103.935 G1 X127.685 Y103.903 G1 X127.651 Y103.87 G1 X127.616 Y103.837 G1 X127.581 Y103.805 G1 X127.542 Y103.772 G1 X129.314 Y101.381 G1 X128.934 Y101.381 G1 Z.2 F720 G1 E.7 F1500 ;WIDTH:0.504514 G1 F6000 G1 X128.421 Y100.868 E.02785 G1 X127.924 Y101.023 E.02 G1 X128.729 Y101.828 E.04368 G1 X128.729 Y102.481 E.02506 G1 X127.263 Y101.015 E.07956 G1 X126.673 Y101.005 E.02263 G1 X126.596 Y101.001 E.00295 G1 X128.729 Y103.133 E.11574 G1 X128.729 Y103.786 E.02506 G1 X125.913 Y100.971 E.15283 G1 X125.78 Y100.965 E.00511 G1 X125.764 Y101.475 E.01958 G1 X127.177 Y102.887 E.07666 G1 X127.112 Y102.863 E.00263 G1 X126.631 Y102.737 E.01907 G2 X126.467 Y102.708 I-.271 J1.056 E.0064 G1 X126.337 Y102.7 E.00501 G1 X125.516 Y101.879 E.04458 G1 X125.25 Y102.068 E.0125 G1 X125.193 Y102.093 E.00242 G1 X125.106 Y102.122 E.0035 G1 X125.73 Y102.746 E.03386 G1 X125.465 Y102.79 E.0103 G1 X125.413 Y102.8 E.00203 G1 X125.286 Y102.837 E.00508 G2 X125.204 Y102.873 I.157 J.472 E.00345 G1 X124.504 Y102.173 E.038 G1 X123.858 Y102.18 E.02478 G1 X124.799 Y103.122 E.0511 G2 X124.708 Y103.078 I-.294 J.495 E.00389 G1 X124.693 Y103.067 E.0007 G1 X124.576 Y102.996 E.00527 G1 X124.142 Y102.888 E.01716 G1 X123.91 Y102.884 E.00892 G1 X121.352 Y100.327 E.13883 G1 X121.271 Y100.769 E.01726 G1 X121.271 Y100.898 E.00497 G1 X123.297 Y102.924 E.10995 G1 X123.263 Y102.933 E.00136 G1 X122.809 Y103.089 E.01842 G1 X121.271 Y101.551 E.08345 G1 X121.271 Y102.204 E.02506 G1 X122.403 Y103.336 E.06144 G1 X122.153 Y103.526 E.01205 G1 X122.048 Y103.633 E.00578 G1 X121.271 Y102.857 E.04215 G1 X121.271 Y103.51 E.02506 G1 X121.759 Y103.998 E.02649 G1 X121.667 Y104.125 E.00604 G1 X121.538 Y104.374 E.01076 G1 X121.52 Y104.411 E.00159 G1 X121.066 Y103.957 E.02468 ;PATH_TASK id=256 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z.8 F720 G1 X120.686 Y103.957 Z.8 F21000 G1 X122.016 Y99.37 G1 X122.331 Y98.705 G1 X126.714 Y98.946 G1 X127.957 Y97.074 G1 X128.304 Y97.536 G1 Z.2 F720 G1 E.7 F1500 ;WIDTH:0.513223 G1 F6000 G1 X128.935 Y98.167 E.03492 ;PATH_TASK id=257 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z.8 F720 G1 X128.934 Y83.502 Z.8 F21000 G1 Z.2 F720 G1 E.7 F1500 ;WIDTH:0.50569 G1 F6000 G1 X128.204 Y82.771 E.03974 G1 X127.55 Y82.771 E.02518 G1 X128.141 Y83.362 E.03217 G1 X127.48 Y83.357 E.02541 G1 X126.895 Y82.771 E.03184 G1 X126.241 Y82.771 E.02518 G1 X126.866 Y83.397 E.03403 G1 X126.436 Y83.621 E.01867 G1 X125.586 Y82.771 E.04623 G1 X124.932 Y82.771 E.02518 G1 X126.177 Y84.017 E.06777 G1 X126.168 Y84.046 E.00119 G1 X125.968 Y83.879 E.01004 G1 X125.869 Y83.806 E.00472 G1 X125.785 Y83.757 E.00376 G1 X125.312 Y83.513 E.02049 G1 X125.061 Y83.424 E.01023 G1 X124.896 Y83.391 E.00646 G1 X124.277 Y82.771 E.0337 G1 X123.623 Y82.771 E.02518 G1 X124.174 Y83.323 E.03002 G1 X123.703 Y83.372 E.01824 G1 X123.629 Y83.382 E.00289 G1 X123.591 Y83.394 E.00151 G1 X122.968 Y82.771 E.03389 G1 X122.314 Y82.771 E.02518 G1 X123.122 Y83.58 E.04399 G1 X122.966 Y83.652 E.00662 G1 X122.724 Y83.81 E.01112 G1 X122.711 Y83.822 E.00071 G1 X121.659 Y82.771 E.0572 G1 X121.271 Y82.771 E.01493 G1 X121.271 Y83.038 E.01025 G1 X122.365 Y84.131 E.05952 G1 X122.349 Y84.146 E.00083 G1 X122.166 Y84.366 E.01103 G1 X122.083 Y84.504 E.00617 G1 X121.271 Y83.692 E.04415 G1 X121.271 Y84.347 E.02518 G1 X121.852 Y84.928 E.03162 G1 X121.807 Y85.034 E.00446 G1 X121.702 Y85.432 E.01582 G1 X121.271 Y85.001 E.02343 G1 X121.271 Y85.656 E.02518 G1 X121.629 Y86.013 E.01945 G1 X121.619 Y86.331 E.01225 G1 X121.634 Y86.501 E.00656 G1 X121.671 Y86.71 E.00818 G1 X121.271 Y86.31 E.02177 G1 X121.271 Y86.964 E.02518 G1 X122.017 Y87.71 E.04057 G1 X122.049 Y87.772 E.0027 G1 X122.175 Y87.947 E.00831 G1 X122.334 Y88.124 E.00914 G1 X122.143 Y88.169 E.00758 G1 X121.947 Y88.294 E.00895 G1 X121.271 Y87.619 E.03674 G1 X121.271 Y88.273 E.02518 G1 X121.724 Y88.726 E.02462 G1 X121.564 Y89.053 E.014 G1 X121.561 Y89.218 E.00636 G1 X121.271 Y88.928 E.01578 G1 X121.271 Y89.582 E.02518 G1 X121.803 Y90.114 E.02892 ;PATH_TASK id=258 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z.8 F720 G1 X122.131 Y90.139 Z.8 F21000 G1 X122.548 Y89.05 G1 X125.515 Y89.06 G1 X126.014 Y89.063 G1 X127.912 Y89.368 G1 X127.961 Y89.532 G1 X128.228 Y90.443 G1 X128.538 Y90.959 G1 Z.2 F720 G1 E.7 F1500 G1 F6000 G1 X128.729 Y91.149 E.01038 G1 X128.729 Y91.804 E.02518 G1 X128.203 Y91.279 E.02858 G1 X128.079 Y91.317 E.005 G1 X127.579 Y91.309 E.01926 G1 X128.729 Y92.458 E.06256 G1 X128.729 Y93.113 E.02518 G1 X126.913 Y91.297 E.0988 G1 X126.839 Y91.296 E.00287 G1 X126.23 Y91.269 E.02344 G1 X128.729 Y93.767 E.13597 G1 X128.729 Y94.422 E.02518 G1 X125.928 Y91.621 E.1524 G1 X125.919 Y91.834 E.0082 G1 X125.771 Y92.076 E.01091 G1 X125.751 Y92.099 E.00116 G1 X126.827 Y93.175 E.05857 G1 X126.736 Y93.15 E.00365 G1 X126.713 Y93.146 E.00088 G1 X126.128 Y93.045 E.02286 G1 X126.031 Y93.033 E.00374 G1 X125.365 Y92.367 E.03625 G1 X125.303 Y92.406 E.00284 G1 X125.208 Y92.433 E.00378 G1 X125.17 Y92.441 E.00152 G1 X125 Y92.46 E.00655 G1 X124.806 Y92.462 E.00748 G1 X125.336 Y92.992 E.02884 G1 X125.282 Y92.992 E.00207 G1 X124.696 Y93.007 E.02255 G1 X123.955 Y92.266 E.04033 ;PATH_TASK id=259 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X124.288 Y93.253 F21000 G1 F6000 G1 X121.271 Y90.237 E.16415 G1 X121.271 Y90.891 E.02518 G1 X123.576 Y93.196 E.12543 G1 X123.226 Y93.31 E.01417 G1 X123.123 Y93.35 E.00426 G1 X123.092 Y93.366 E.00134 G1 X121.271 Y91.546 E.09908 G1 X121.271 Y92.2 E.02518 G1 X122.675 Y93.604 E.07639 G1 X122.573 Y93.663 E.00454 G1 X122.358 Y93.832 E.01052 G1 X122.304 Y93.888 E.00298 G1 X121.271 Y92.855 E.05622 G1 X121.271 Y93.509 E.02518 G1 X121.99 Y94.228 E.03912 G1 X121.856 Y94.419 E.00899 G1 X121.746 Y94.638 E.00943 G1 X121.271 Y94.163 E.02581 G1 X121.271 Y94.818 E.02518 G1 X121.557 Y95.103 E.01552 G1 X121.553 Y95.114 E.00044 G1 X121.465 Y95.62 E.01976 G1 X121.461 Y95.662 E.00163 G1 X121.271 Y95.472 E.01032 G1 X121.271 Y96.127 E.02518 G1 X121.494 Y96.349 E.0121 G2 X121.509 Y96.487 I1.55 J-.108 E.00534 G1 X121.56 Y96.669 E.00726 G1 X121.725 Y97.102 E.01782 G1 X121.873 Y97.36 E.01144 G1 X121.963 Y97.473 E.00558 G1 X121.271 Y96.781 E.03765 G1 X121.271 Y97.436 E.02518 G1 X121.818 Y97.982 E.02974 G1 X121.531 Y98.35 E.01794 G1 X121.107 Y97.926 E.02304 ;PATH_TASK id=260 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z.8 F720 G1 X120.686 Y97.926 Z.8 F21000 G1 X121.68 Y115.225 G1 X121.9 Y116.06 G1 X124.83 Y123.196 G1 X125.102 Y125.042 G1 X125.303 Y125.59 G1 X125.183 Y125.61 G1 X125.204 Y125.733 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Outer wall ;WIDTH:0.537621 G1 F2700 G1 X124.09 Y124.931 E.05645 G1 X125.217 Y124.95 E.04637 G1 X125.204 Y125.693 E.03055 ;PATH_TASK id=261 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X125.19 Y125.609 Z.8 F21000 G1 X125.219 Y125.191 G1 X125.294 Y122.708 G1 X125.447 Y117.646 G1 X125.453 Y115.452 G1 X125.514 Y115.403 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.510473 G1 F2700 G1 X125.465 Y115.344 E.00299 G1 X125.477 Y115.177 E.0065 G1 X125.616 Y115.071 E.00683 G1 X125.926 Y115.06 E.01204 ;PATH_TASK id=262 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.505244 G1 X126.172 Y115.136 E.00992 G1 X126.24 Y115.306 E.00705 ;PATH_TASK id=263 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X126.143 Y115.431 E.00608 G1 X125.903 Y115.52 E.00983 ;PATH_TASK id=261 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.510473 G1 X125.581 Y115.483 E.01259 G1 X125.54 Y115.434 E.00252 ;PATH_TASK id=264 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X125.486 Y115.488 F21000 G1 X125.455 Y115.455 G1 X125.455 Y115.455 G1 X125.123 Y115.73 ;TYPE:Outer wall ;WIDTH:0.499999 G1 F2700 G1 X124.991 Y115.485 E.01058 G1 X124.966 Y115.2 E.01089 G1 X125.041 Y114.944 E.01013 G1 X125.218 Y114.733 E.01045 G1 X125.466 Y114.604 E.01064 G1 X125.698 Y114.571 E.0089 G1 X126.209 Y114.612 E.01947 G1 X126.476 Y114.751 E.01146 G1 X126.574 Y114.864 E.00566 G1 X126.699 Y115.077 E.00938 G1 X126.712 Y115.44 E.01382 G1 X126.588 Y115.684 E.0104 G1 X126.362 Y115.877 E.01128 G1 X126.033 Y115.997 E.0133 G1 X125.647 Y116.01 E.01468 G1 X125.345 Y115.917 E.01202 G1 X125.153 Y115.756 E.0095 ;PATH_TASK id=265 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X124.319 Y115.796 Z.8 F21000 G1 X124.305 Y115.767 G1 X124.29 Y115.732 G1 X124.275 Y115.697 G1 X124.262 Y115.663 G1 X124.249 Y115.628 G1 X124.237 Y115.593 G1 X124.226 Y115.556 G1 X124.218 Y115.527 G1 X124.211 Y115.499 G1 X124.204 Y115.47 G1 X124.198 Y115.441 G1 X124.192 Y115.412 G1 X124.187 Y115.382 G1 X124.183 Y115.358 G1 X124.179 Y115.324 G1 X124.176 Y115.294 G1 X124.173 Y115.265 G1 X124.171 Y115.235 G1 X124.17 Y115.205 G1 X124.169 Y115.176 G1 X124.169 Y115.149 G1 X124.169 Y115.121 G1 X124.17 Y115.088 G1 X124.172 Y115.056 G1 X124.174 Y115.024 G1 X124.177 Y114.992 G1 X124.181 Y114.96 G1 X124.185 Y114.929 G1 X124.189 Y114.903 G1 X124.195 Y114.868 G1 X124.201 Y114.837 G1 X124.208 Y114.807 G1 X124.215 Y114.777 G1 X124.223 Y114.747 G1 X126.077 Y107.966 G1 X126.395 Y105.839 G1 X126.335 Y105.789 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.538864 G1 F2700 G1 X126.161 Y105.864 E.00782 G1 X125.967 Y105.815 E.00823 G1 X125.89 Y105.666 E.00692 ;PATH_TASK id=266 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.539271 G1 X125.939 Y105.447 E.00926 G1 X126.059 Y105.364 E.006 G1 X126.232 Y105.362 E.00715 G1 X126.351 Y105.443 E.00592 G1 X126.391 Y105.623 E.00761 ;PATH_TASK id=267 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X126.348 Y105.752 E.00561 ;PATH_TASK id=268 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X126.425 Y105.791 F21000 G1 X126.396 Y105.838 G1 X126.392 Y105.842 G1 X126.723 Y106.119 ;TYPE:Outer wall ;WIDTH:0.499999 G1 F2700 G1 X126.512 Y106.283 E.01016 G1 X126.203 Y106.368 E.01215 G1 X125.887 Y106.336 E.0121 G1 X125.644 Y106.206 E.01046 G1 X125.465 Y105.987 E.01075 G1 X125.387 Y105.72 E.01058 G1 X125.41 Y105.399 E.01223 G1 X125.532 Y105.143 E.01078 G1 X125.753 Y104.943 E.01136 G1 X126.028 Y104.848 E.01103 G1 X126.449 Y104.894 E.01612 G1 X126.676 Y105.039 E.01022 G1 X126.841 Y105.273 E.01089 G1 X126.87 Y105.412 E.0054 G1 X126.86 Y105.868 E.01731 G1 X126.742 Y106.084 E.00938 ;PATH_TASK id=269 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X126.401 Y105.83 Z.8 F21000 G1 X125.827 Y105.732 G1 X123.896 Y105.449 G1 X124.07 Y105.056 G1 Z.2 F720 G1 E.7 F1500 G1 F2700 G1 X124.162 Y105.126 E.00438 G1 X124.303 Y105.293 E.00833 G1 X124.366 Y105.678 E.01482 G1 X124.285 Y105.901 E.009 G1 X124.132 Y106.052 E.00819 G1 X123.913 Y106.128 E.00881 G1 X123.669 Y106.108 E.00932 G1 X123.478 Y105.989 E.00855 G1 X123.35 Y105.794 E.00886 G1 X123.314 Y105.537 E.00987 G1 X123.375 Y105.305 E.00911 G1 X123.528 Y105.122 E.00909 G1 X123.742 Y105.021 E.009 G1 X124.031 Y105.051 E.01101 ;PATH_TASK id=270 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X123.893 Y105.448 Z.8 F21000 G1 X124.023 Y103.389 G1 X122.008 Y99.823 G1 X122.016 Y99.37 G1 X122.331 Y98.705 G1 X123.995 Y97.537 G1 X123.914 Y95.874 G1 X123.987 Y95.876 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.517996 G1 F2700 G1 X123.984 Y95.872 E.00019 G1 X124.068 Y95.779 E.00494 G1 X124.393 Y95.678 E.01346 ;PATH_TASK id=271 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.535163 G1 X125.155 Y95.65 E.0312 G1 X126.044 Y95.679 E.03641 ;PATH_TASK id=272 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499264 G1 X126.432 Y95.779 E.01519 G1 X126.577 Y95.914 E.00753 ;PATH_TASK id=273 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X126.446 Y96.037 E.00684 G1 X126.036 Y96.134 E.01598 ;PATH_TASK id=274 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.535163 G1 X125.137 Y96.142 E.03681 G1 X124.379 Y96.064 E.03117 ;PATH_TASK id=270 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.517996 G1 X124.04 Y95.952 E.0141 G1 X124.01 Y95.909 E.00208 ;PATH_TASK id=275 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X123.954 Y95.972 F21000 G1 X123.926 Y95.942 G1 X123.926 Y95.941 G1 X123.564 Y96.175 ;TYPE:Outer wall ;WIDTH:0.499999 G1 F2700 G1 X123.488 Y95.969 E.00833 G1 X123.507 Y95.712 E.00979 G1 X123.623 Y95.509 E.00889 G1 X123.858 Y95.325 E.01134 G1 X124.123 Y95.246 E.01053 G1 X124.643 Y95.162 E.02002 G1 X125.159 Y95.154 E.01959 G1 X126.095 Y95.204 E.03562 G1 X126.529 Y95.31 E.01701 G1 X126.786 Y95.44 E.01095 G1 X126.959 Y95.618 E.00944 G1 X127.066 Y95.922 E.01223 G1 X127.015 Y96.143 E.00863 G1 X126.853 Y96.351 E.01001 G1 X126.601 Y96.502 E.01117 G1 X126.121 Y96.607 E.01868 G1 X125.61 Y96.64 E.01944 G1 X124.74 Y96.612 E.03311 G1 X124.194 Y96.527 E.02097 G1 X123.752 Y96.36 E.01798 G1 X123.592 Y96.203 E.0085 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 M106 S122 ;LAYER_CHANGE ;Z:0.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;0.4 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;0.4 ;_SET_FAN_SPEED_CHANGING_LAYER M204 P3000 M104 S220 ; set nozzle temperature ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=276 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M486 S0 G1 Z1 F720 G1 X123.87 Y95.992 Z1 F21000 G1 X124.192 Y98.041 G1 X122.065 Y98.43 G1 X122.042 Y99.804 G1 X123.496 Y101.518 G1 X125.38 Y101.55 G1 X124.893 Y100.674 G1 X124.871 Y100.645 G1 X124.845 Y100.612 G1 X124.948 Y100.358 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F10200 G1 X127.707 Y100.405 E.09339 G1 X127.951 Y100.358 E.00841 G1 X128.202 Y100.165 E.01074 G1 X128.327 Y99.805 E.01291 G1 X128.339 Y99.105 E.02369 G1 X128.261 Y98.795 E.0108 G1 X128 Y98.547 E.0122 G1 X127.739 Y98.484 E.00908 G1 X126.693 Y98.466 E.03544 G1 X126.153 Y98.478 E.01828 ;PATH_TASK id=277 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.407878 G1 X125.554 Y98.48 E.01818 ;PATH_TASK id=278 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.383002 G1 X124.871 Y98.469 E.01931 ;PATH_TASK id=279 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.406794 G1 X124.305 Y98.447 E.01713 ;PATH_TASK id=280 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X123.607 Y98.414 E.02367 G1 X122.634 Y98.397 E.03294 G1 X122.303 Y98.488 E.01159 G1 X122.086 Y98.717 E.01069 G1 X122.013 Y98.997 E.00981 G1 X122.005 Y99.461 E.0157 G1 X122.078 Y99.762 E.01049 G1 X122.261 Y99.969 E.00933 G1 X122.521 Y100.154 E.01079 G1 X122.858 Y100.486 E.01603 G1 X123.155 Y100.909 E.01748 G1 X123.394 Y101.35 E.01699 G1 X123.571 Y101.494 E.00771 G1 X123.838 Y101.567 E.00937 G1 X124.536 Y101.579 E.02364 G1 X124.794 Y101.527 E.00889 G1 X125 Y101.377 E.00863 G1 X125.099 Y101.228 E.00605 G1 X125.107 Y100.726 E.01701 G1 X124.964 Y100.394 E.01222 ;PATH_TASK id=281 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T3000 G1 X124.845 Y100.612 F21000 G1 X124.214 Y100.143 G1 X124.333 Y100.023 G1 X124.228 Y99.92 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X127.274 Y99.969 E.10312 G1 X127.787 Y99.962 E.01735 G1 X127.896 Y99.826 E.00593 G1 X127.911 Y99.098 E.02465 G1 X127.831 Y98.944 E.00588 G1 X127.732 Y98.912 E.0035 G1 X122.862 Y98.83 E.16486 G1 X122.528 Y98.853 E.01134 G1 X122.441 Y99.004 E.00592 G1 X122.455 Y99.558 E.01875 G1 X122.911 Y99.906 E.01939 G1 X123.176 Y100.198 E.01336 G1 X123.47 Y100.608 E.01708 G1 X123.722 Y101.074 E.01794 G1 X123.854 Y101.138 E.00498 G1 X124.544 Y101.15 E.02333 G1 X124.682 Y101.09 E.00511 G1 X124.714 Y100.896 E.00666 G1 X124.492 Y100.386 E.01881 G1 X124.248 Y99.954 E.0168 ;PATH_TASK id=282 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1 F720 G1 X124.325 Y100.031 Z1 F21000 G1 X124.845 Y100.612 G1 X124.871 Y100.645 G1 X124.893 Y100.674 G1 X125.38 Y101.55 G1 X123.496 Y101.518 G1 X122.042 Y99.804 G1 X122.109 Y95.837 G1 X122.111 Y95.777 G1 X122.114 Y95.721 G1 X122.118 Y95.67 G1 X122.123 Y95.621 G1 X122.128 Y95.571 G1 X122.135 Y95.522 G1 X122.143 Y95.472 G1 X122.153 Y95.424 G1 X122.163 Y95.375 G1 X122.174 Y95.327 G1 X122.187 Y95.279 G1 X122.2 Y95.231 G1 X122.215 Y95.184 G1 X122.229 Y95.142 G1 X122.243 Y95.104 G1 X122.258 Y95.067 G1 X122.273 Y95.03 G1 X122.289 Y94.993 G1 X122.306 Y94.957 G1 X122.324 Y94.921 G1 X122.341 Y94.887 G1 X122.358 Y94.857 G1 X122.384 Y94.81 G1 X122.406 Y94.773 G1 X122.427 Y94.74 G1 X122.448 Y94.708 G1 X122.47 Y94.676 G1 X122.492 Y94.645 G1 X122.516 Y94.614 G1 X122.539 Y94.583 G1 X122.564 Y94.553 G1 X122.589 Y94.524 G1 X122.614 Y94.495 G1 X122.641 Y94.466 G1 X122.667 Y94.438 G1 X122.695 Y94.411 G1 X122.723 Y94.384 G1 X122.751 Y94.358 G1 X122.78 Y94.332 G1 X122.809 Y94.307 G1 X122.839 Y94.282 G1 X122.87 Y94.258 G1 X122.885 Y94.247 G1 X122.886 Y94.246 G1 X122.874 Y94.23 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall G1 F10200 G1 X122.742 Y94.316 E.00531 G1 X122.344 Y94.806 E.02138 G1 X122.117 Y95.407 E.02176 G1 X122.078 Y96.079 E.02277 ;PATH_TASK id=283 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X122.23 Y96.72 E.02232 G1 X122.551 Y97.238 E.02061 G1 X123.049 Y97.662 E.02217 G1 X123.666 Y97.952 E.02305 G1 X124.328 Y98.084 E.02284 ;PATH_TASK id=284 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.406794 G1 X124.878 Y98.129 E.0167 ;PATH_TASK id=285 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.383002 G1 X125.546 Y98.141 E.01891 ;PATH_TASK id=286 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.409336 G1 X126.138 Y98.114 E.01805 ;PATH_TASK id=282 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X126.759 Y98.017 E.02128 G1 X127.368 Y97.779 E.02214 G1 X127.897 Y97.387 E.02226 G1 X128.261 Y96.876 E.02126 G1 X128.443 Y96.301 E.02041 G1 X128.457 Y95.614 E.02324 G1 X128.279 Y94.982 E.02224 G1 X127.935 Y94.482 E.02054 G1 X127.44 Y94.088 E.02143 G1 X126.813 Y93.812 E.02319 G1 X126.219 Y93.679 E.02059 G1 X125.653 Y93.623 E.01925 G1 X124.525 Y93.634 E.0382 G1 X123.921 Y93.733 E.0207 G1 X123.318 Y93.944 E.02163 G1 X122.908 Y94.209 E.01653 ;PATH_TASK id=287 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T3000 G1 X122.918 Y94.222 F21000 G1 X122.901 Y94.235 G1 X122.87 Y94.258 G1 X122.863 Y94.264 G1 X123.103 Y94.568 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X122.737 Y94.975 E.01854 G1 X122.544 Y95.447 E.01726 G1 X122.496 Y95.966 E.01765 G1 X122.586 Y96.459 E.01696 G1 X122.816 Y96.893 E.01663 G1 X123.205 Y97.256 E.01801 G1 X123.729 Y97.521 E.01986 G1 X124.347 Y97.676 E.02156 G1 X124.871 Y97.733 E.01786 G1 X125.506 Y97.747 E.0215 G1 X126.047 Y97.715 E.01832 G1 X126.585 Y97.621 E.01849 G1 X127.088 Y97.444 E.01808 G1 X127.519 Y97.16 E.01745 G1 X127.83 Y96.78 E.01662 G1 X128.012 Y96.298 E.01746 G1 X128.044 Y95.751 E.01853 G1 X127.937 Y95.263 E.01693 G1 X127.657 Y94.808 E.01809 G1 X127.259 Y94.477 E.0175 G1 X126.752 Y94.242 E.01894 G1 X126.195 Y94.109 E.01937 G1 X125.675 Y94.052 E.01772 G1 X124.614 Y94.056 E.03591 G1 X124.083 Y94.133 E.01815 G1 X123.571 Y94.297 E.0182 G1 X123.138 Y94.548 E.01694 ;PATH_TASK id=288 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1 F720 G1 X122.906 Y94.231 Z1 F21000 G1 X122.207 Y90.095 G1 X122.23 Y88.722 G1 X128.46 Y88.543 G1 X128.492 Y87.64 G1 X128.553 Y84.03 G1 X126.742 Y83.999 G1 X126.48 Y85.558 G1 X126.471 Y85.537 G1 X126.674 Y85.453 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall G1 F10200 G1 X126.402 Y85.132 E.01427 G1 X125.961 Y84.674 E.02151 G1 X125.427 Y84.261 E.02284 G1 X124.805 Y83.993 E.02294 G1 X124.197 Y83.927 E.02068 G1 X123.564 Y84.05 E.02183 G1 X123.036 Y84.348 E.02053 G1 X122.613 Y84.803 E.02105 G1 X122.346 Y85.367 E.0211 G1 X122.237 Y86.013 E.02219 G1 X122.28 Y86.668 E.02221 G1 X122.489 Y87.291 E.02223 G1 X122.856 Y87.792 E.02102 G1 X123.351 Y88.15 E.02068 G1 X123.822 Y88.32 E.01695 ;PATH_TASK id=289 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.433061 G1 X124.332 Y88.389 E.01669 ;PATH_TASK id=290 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.422866 G1 X124.533 Y88.331 E.00661 ;PATH_TASK id=291 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X124.734 Y88.273 E.00708 G1 X124.938 Y87.937 E.01331 G1 X125.034 Y87.162 E.02646 ;PATH_TASK id=292 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X124.982 Y86.98 E.00641 ;PATH_TASK id=293 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.420209 G1 X124.93 Y86.797 E.00594 ;PATH_TASK id=294 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.390418 G1 X124.87 Y86.717 E.0029 ;PATH_TASK id=295 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.423604 G1 X124.698 Y86.598 E.0066 ;PATH_TASK id=296 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.462463 G1 X124.527 Y86.48 E.00727 ;PATH_TASK id=297 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.489395 G1 F10078.963 G1 X124.374 Y86.442 E.00583 ;PATH_TASK id=298 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.516326 G1 F9505.583 G1 X124.222 Y86.403 E.00618 G1 X124.119 Y86.311 E.00545 G1 X124.105 Y86.058 E.00998 G1 X124.174 Y85.937 E.00549 G1 X124.282 Y85.912 E.00439 G1 X124.649 Y86.082 E.01593 ;PATH_TASK id=299 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.484216 G1 F10197.237 G1 X124.85 Y86.243 E.00944 ;PATH_TASK id=300 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.436329 G1 F10200 G1 X125.05 Y86.405 E.00842 ;PATH_TASK id=301 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.390418 G1 X125.213 Y86.598 E.00731 ;PATH_TASK id=302 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.420209 G1 X125.369 Y86.807 E.00816 ;PATH_TASK id=303 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X125.525 Y87.015 E.00881 G1 X126.04 Y87.613 E.02672 G1 X126.444 Y87.999 E.01892 G1 X127.012 Y88.37 E.02295 ;PATH_TASK id=304 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.490593 G1 F10051.984 G1 X127.129 Y88.43 E.00489 ;PATH_TASK id=305 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.531187 G1 F9216.277 G1 X127.246 Y88.489 E.00534 ;PATH_TASK id=306 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.571781 G1 F8508.862 G1 X127.363 Y88.549 E.00578 ;PATH_TASK id=307 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.612375 G1 F7902.304 G1 X127.48 Y88.609 E.00623 ;PATH_TASK id=308 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.652968 G1 F7376.469 G1 X127.597 Y88.669 E.00667 G1 X127.465 Y88.687 E.00676 ;PATH_TASK id=309 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.612375 G1 F7902.304 G1 X127.333 Y88.705 E.00631 ;PATH_TASK id=310 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.571781 G1 F8508.862 G1 X127.201 Y88.723 E.00586 ;PATH_TASK id=311 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.531187 G1 F9216.277 G1 X127.069 Y88.741 E.00541 ;PATH_TASK id=312 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.490593 G1 F10051.984 G1 X126.937 Y88.759 E.00496 ;PATH_TASK id=313 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X124.893 Y88.724 E.06921 G1 X124.609 Y88.733 E.00961 ;PATH_TASK id=314 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.422866 G1 X124.326 Y88.741 E.00897 ;PATH_TASK id=315 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.433061 G1 X123.746 Y88.713 E.01881 ;PATH_TASK id=316 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X123.246 Y88.696 E.01695 G1 X122.649 Y88.704 E.0202 G1 X122.473 Y88.776 E.00646 G1 X122.242 Y89.026 E.01151 G1 X122.178 Y89.289 E.00914 G1 X122.17 Y89.752 E.0157 G1 X122.244 Y90.054 E.01049 G1 X122.426 Y90.26 E.00933 G1 X122.882 Y90.621 E.0197 G1 X123.274 Y91.13 E.02174 G1 X123.552 Y91.632 E.01943 G1 X123.702 Y91.765 E.00676 G1 X123.97 Y91.856 E.00958 G1 X124.715 Y91.87 E.02522 G1 X125.062 Y91.76 E.01234 G1 X125.26 Y91.529 E.0103 G1 X125.272 Y91.017 E.01732 G1 X125.113 Y90.649 E.01358 G1 X127.657 Y90.692 E.08613 G1 X128.106 Y90.654 E.01524 G1 X128.363 Y90.462 E.01086 G1 X128.493 Y90.096 E.01314 G1 X128.505 Y89.396 E.02369 G1 X128.382 Y89.019 E.01341 ;PATH_TASK id=317 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.497791 G1 F9892.919 G1 X128.279 Y88.935 E.00505 ;PATH_TASK id=318 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.545583 G1 F8952.329 G1 X128.175 Y88.851 E.00558 ;PATH_TASK id=319 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.593375 G1 F8175.066 G1 X128.071 Y88.767 E.00611 ;PATH_TASK id=320 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.641166 G1 F7521.99 G1 X127.968 Y88.683 E.00664 G1 X128.074 Y88.603 E.00664 ;PATH_TASK id=321 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.593375 G1 F8175.066 G1 X128.181 Y88.523 E.00611 ;PATH_TASK id=322 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.545583 G1 F8952.329 G1 X128.287 Y88.442 E.00558 ;PATH_TASK id=323 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.497791 G1 F9892.919 G1 X128.394 Y88.362 E.00505 ;PATH_TASK id=324 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X128.529 Y87.989 E.01341 G1 X128.537 Y87.48 E.01725 M73 P81 R6 ;PATH_TASK id=325 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.499426 G1 F9857.488 G1 X128.564 Y87.38 E.00391 ;PATH_TASK id=326 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.548853 G1 F8894.467 G1 X128.59 Y87.281 E.00433 ;PATH_TASK id=327 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.59828 G1 F8102.863 G1 X128.616 Y87.181 E.00476 ;PATH_TASK id=328 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.647706 G1 F7440.649 G1 X128.643 Y87.082 E.00518 G1 X128.675 Y84.6 E.12482 ;PATH_TASK id=329 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.626588 G1 F7709.863 G1 X128.615 Y84.497 E.00576 ;PATH_TASK id=330 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.582441 G1 F8340.736 G1 X128.556 Y84.394 E.00532 ;PATH_TASK id=331 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.538294 G1 F9084.055 G1 X128.497 Y84.291 E.00489 ;PATH_TASK id=332 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.494147 G1 F9972.824 G1 X128.438 Y84.188 E.00445 ;PATH_TASK id=288 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X128.144 Y84.001 E.01178 G1 X127.986 Y83.977 E.00542 G1 X127.31 Y83.966 E.02288 G1 X127.068 Y84.011 E.00834 G1 X126.82 Y84.198 E.01052 G1 X126.694 Y84.504 E.01118 G1 X126.675 Y85.413 E.0308 ;PATH_TASK id=333 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T3000 G1 E-.7 F2700 G1 Z1 F720 G1 X126.875 Y85.353 Z1 F21000 G1 X126.93 Y85.534 G1 X127.025 Y85.841 G1 X127.121 Y86.148 G1 X127.221 Y86.457 G1 X127.063 Y86.547 G1 X127.084 Y86.584 G1 Z.4 F720 G1 E.7 F1500 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X127.008 Y86.514 E.0035 G1 X126.098 Y85.434 E.04779 G1 X125.708 Y85.022 E.01922 G1 X125.279 Y84.671 E.01874 G1 X124.792 Y84.433 E.01838 G1 X124.311 Y84.352 E.01649 G1 X123.812 Y84.415 E.01701 G1 X123.381 Y84.622 E.01618 G1 X123.026 Y84.957 E.01655 G1 X122.767 Y85.448 E.01877 G1 X122.669 Y85.956 E.01751 G1 X122.685 Y86.505 E.01859 G1 X122.824 Y87.006 E.01759 G1 X123.1 Y87.436 E.0173 G1 X123.502 Y87.75 E.01726 G1 X123.971 Y87.927 E.01694 G1 X124.313 Y87.985 E.01176 G1 X124.458 Y87.945 E.00511 G1 X124.53 Y87.761 E.00668 G1 X124.608 Y87.111 E.02218 G1 X124.549 Y86.953 E.00569 G1 X124.059 Y86.844 E.01698 G1 X123.832 Y86.706 E.009 G1 X123.686 Y86.499 E.00857 G1 X123.621 Y86.19 E.01069 G1 X123.664 Y85.871 E.01089 G1 X123.8 Y85.639 E.00913 G1 X124.007 Y85.485 E.00873 G1 X124.24 Y85.434 E.00807 G1 X124.536 Y85.49 E.01018 G1 X124.903 Y85.708 E.01446 G1 X125.327 Y86.119 E.02001 G1 X126.274 Y87.241 E.04968 G1 X126.663 Y87.627 E.01854 G1 X127.123 Y87.948 E.01899 G1 X127.588 Y88.129 E.01688 G1 X127.904 Y88.161 E.01076 G1 X128.014 Y88.134 E.00383 G1 X128.097 Y88.01 E.00504 G1 X128.158 Y84.591 E.11577 G1 X128.113 Y84.469 E.0044 G1 X127.979 Y84.406 E.00503 G1 X127.231 Y84.408 E.02532 G1 X127.123 Y84.532 E.00555 G1 X127.084 Y86.544 E.06812 ;PATH_TASK id=334 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1 F720 G1 X127.081 Y86.537 Z1 F21000 G1 X126.741 Y84.915 G1 X126.742 Y83.999 G1 X128.553 Y84.03 G1 X128.44 Y90.663 G1 X125.874 Y90.619 G1 X125.57 Y90.53 G1 X124.68 Y90.131 G1 X124.498 Y90.315 G1 X124.393 Y90.211 G1 Z.4 F720 G1 E.7 F1500 G1 F10200 G1 X127.203 Y90.256 E.09513 G1 X127.949 Y90.255 E.02524 G1 X128.062 Y90.117 E.00603 G1 X128.076 Y89.389 E.02465 G1 X128.04 Y89.276 E.004 G1 X127.913 Y89.205 E.00493 G1 X122.792 Y89.117 E.17338 G1 X122.671 Y89.16 E.00435 G1 X122.606 Y89.296 E.00508 G1 X122.621 Y89.849 E.01875 G1 X123.076 Y90.197 E.01939 G1 X123.336 Y90.484 E.01312 G1 X123.632 Y90.895 E.01714 G1 X123.885 Y91.362 E.018 G1 X124.01 Y91.429 E.00478 G1 X124.744 Y91.439 E.02487 G1 X124.865 Y91.359 E.0049 G1 X124.879 Y91.187 E.00582 G1 X124.666 Y90.696 E.01813 G1 X124.413 Y90.246 E.01748 ;PATH_TASK id=335 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 M73 P82 R6 G1 Z1 F720 G1 X124.49 Y90.322 Z1 F21000 G1 X125.874 Y90.619 G1 X128.44 Y90.663 G1 X128.456 Y89.745 G1 X128.454 Y88.844 G1 X127.964 Y88.832 G1 X127.968 Y88.683 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.652968 G1 F7376.469 G1 X127.597 Y88.669 E.0188 ;PATH_TASK id=336 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X127.614 Y88.515 Z1 F21000 G1 X127.655 Y88.519 G1 X127.69 Y88.522 G1 X127.725 Y88.524 G1 X127.76 Y88.526 G1 X127.798 Y88.528 G1 X128.46 Y88.543 G1 X128.492 Y87.64 G1 X128.509 Y86.598 G1 X128.51 Y86.58 G1 X129.25 Y86.593 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.647706 G1 F7440.649 G1 X129.248 Y87.087 E.02484 G1 X129.272 Y87.187 E.00518 ;PATH_TASK id=337 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.59828 G1 F8102.863 G1 X129.297 Y87.287 E.00476 ;PATH_TASK id=338 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.548853 G1 F8894.467 G1 X129.322 Y87.387 E.00433 ;PATH_TASK id=339 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.499426 G1 F9857.488 G1 X129.346 Y87.487 E.00391 ;PATH_TASK id=340 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X129.346 Y137.846 E1.70462 G1 X127.752 Y137.846 E.05399 ;PATH_TASK id=341 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.491418 G1 F10033.506 G1 X127.629 Y137.826 E.00463 ;PATH_TASK id=342 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.532836 G1 F9185.258 G1 X127.506 Y137.805 E.00506 ;PATH_TASK id=343 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.574254 G1 F8469.254 G1 X127.384 Y137.784 E.00549 ;PATH_TASK id=344 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.615672 G1 F7856.804 G1 X127.261 Y137.764 E.00592 ;PATH_TASK id=345 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.619961 G1 F7798.407 G1 X126.751 Y137.761 E.02451 G1 X126.657 Y137.782 E.00461 ;PATH_TASK id=346 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.579772 G1 F8382.199 G1 X126.563 Y137.802 E.00429 ;PATH_TASK id=347 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.539583 G1 F9060.469 G1 X126.469 Y137.822 E.00397 ;PATH_TASK id=348 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.499394 G1 F9858.173 G1 X126.014 Y137.846 E.01727 ;PATH_TASK id=349 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X120.654 Y137.846 E.18145 G1 X120.654 Y135.791 E.06957 ;PATH_TASK id=350 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.496294 G1 F9925.58 G1 X120.677 Y135.611 E.00686 ;PATH_TASK id=351 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.542589 G1 F9005.962 G1 X120.7 Y135.43 E.00756 ;PATH_TASK id=352 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.588884 G1 F8242.302 G1 X120.723 Y135.25 E.00826 ;PATH_TASK id=353 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.635179 G1 F7598.027 G1 X120.746 Y135.069 E.00896 G1 X120.746 Y134.335 E.03616 ;PATH_TASK id=354 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.634219 G1 F7610.363 G1 X120.723 Y134.206 E.00646 ;PATH_TASK id=355 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.588164 G1 F8253.186 G1 X120.7 Y134.076 E.00596 ;PATH_TASK id=356 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.542109 G1 F9014.622 G1 X120.677 Y133.947 E.00545 ;PATH_TASK id=357 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.496054 G1 F9930.837 G1 X120.654 Y133.817 E.00495 ;PATH_TASK id=358 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X120.654 Y82.154 E1.74876 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y83.85 E.05742 ;PATH_TASK id=359 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.494129 G1 F9973.221 G1 X129.324 Y84.034 E.00697 ;PATH_TASK id=360 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.538258 G1 F9084.715 G1 X129.302 Y84.219 E.00765 ;PATH_TASK id=361 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.582387 G1 F8341.571 G1 X129.28 Y84.403 E.00833 ;PATH_TASK id=362 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.626516 G1 F7710.814 G1 X129.258 Y84.588 E.00901 ;PATH_TASK id=336 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.647706 G1 F7440.649 G1 X129.25 Y86.553 E.09882 ;PATH_TASK id=363 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X129.389 Y86.553 Z1 F21000 G1 X128.265 Y105.785 G1 X128.26 Y105.854 G1 X128.253 Y105.922 G1 X128.245 Y105.984 G1 X128.237 Y106.039 G1 X128.228 Y106.093 G1 X128.218 Y106.148 G1 X128.206 Y106.202 G1 X128.193 Y106.255 G1 X128.179 Y106.308 G1 X128.164 Y106.361 G1 X128.148 Y106.413 G1 X128.13 Y106.464 G1 X128.111 Y106.516 G1 X128.091 Y106.566 G1 X128.072 Y106.611 G1 X128.054 Y106.652 G1 X128.035 Y106.691 G1 X128.015 Y106.731 G1 X127.995 Y106.77 G1 X127.973 Y106.808 G1 X127.951 Y106.846 G1 X127.928 Y106.884 G1 X127.905 Y106.921 G1 X127.88 Y106.957 G1 X127.855 Y106.993 G1 X127.829 Y107.029 G1 X127.802 Y107.064 G1 X127.775 Y107.098 G1 X127.746 Y107.132 G1 X127.718 Y107.165 G1 X127.688 Y107.197 G1 X127.662 Y107.225 G1 X127.635 Y107.253 G1 X127.601 Y107.286 G1 X127.567 Y107.317 G1 X127.533 Y107.348 G1 X127.498 Y107.379 G1 X127.462 Y107.408 G1 X127.426 Y107.437 G1 X127.389 Y107.465 G1 X127.351 Y107.492 G1 X127.313 Y107.518 G1 X127.275 Y107.543 G1 X127.236 Y107.567 G1 X127.196 Y107.591 G1 X127.156 Y107.614 G1 X127.115 Y107.635 G1 X127.074 Y107.656 G1 X127.032 Y107.676 G1 X126.99 Y107.695 G1 X126.948 Y107.712 G1 X126.905 Y107.729 G1 X126.862 Y107.745 G1 X126.818 Y107.76 G1 X126.774 Y107.774 G1 X126.73 Y107.787 G1 X126.686 Y107.799 G1 X126.641 Y107.81 G1 X126.596 Y107.82 G1 X126.55 Y107.829 G1 X126.505 Y107.837 G1 X126.459 Y107.844 G1 X126.413 Y107.85 G1 X126.367 Y107.855 G1 X126.321 Y107.859 G1 X126.274 Y107.862 G1 X126.228 Y107.865 G1 X126.181 Y107.866 G1 X126.136 Y107.867 G1 X126.09 Y107.866 G1 X126.03 Y107.864 G1 X125.971 Y107.861 G1 X125.918 Y107.857 G1 X125.869 Y107.852 G1 X125.822 Y107.847 G1 X125.774 Y107.84 G1 X125.727 Y107.832 G1 X125.68 Y107.823 G1 X125.634 Y107.813 G1 X125.587 Y107.802 G1 X125.541 Y107.79 G1 X125.496 Y107.777 G1 X125.455 Y107.764 G1 X125.418 Y107.751 G1 X125.382 Y107.738 G1 X125.346 Y107.724 G1 X125.31 Y107.71 G1 X125.275 Y107.694 G1 X125.24 Y107.678 G1 X124.681 Y107.413 G1 X124.757 Y107.409 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F10200 G1 X125.071 Y107.63 E.01297 G1 X125.622 Y107.849 E.02008 G1 X126.289 Y107.898 E.02263 G1 X126.922 Y107.763 E.02191 G1 X127.481 Y107.442 E.02183 G1 X127.913 Y106.975 E.02154 G1 X128.194 Y106.393 E.02189 G1 X128.309 Y105.749 E.02214 G1 X128.287 Y105.223 E.01782 G1 X128.112 Y104.592 E.02215 G1 X127.778 Y104.058 E.02132 G1 X127.295 Y103.637 E.02167 G1 X127.11 Y103.535 E.00718 G1 X126.541 Y103.344 E.02032 G1 X126.042 Y103.315 E.01691 G1 X125.507 Y103.403 E.01836 G1 X125.036 Y103.635 E.01775 G1 X124.84 Y103.79 E.00847 G1 X124.799 Y103.762 E.00171 G1 X124.46 Y103.58 E.01302 G1 X123.96 Y103.476 E.01728 G1 X123.455 Y103.521 E.01715 G1 X123.255 Y103.575 E.00702 G1 X122.706 Y103.866 E.02103 G1 X122.274 Y104.32 E.02122 G1 X122.008 Y104.871 E.02069 G1 X121.906 Y105.491 E.02128 G1 X121.97 Y106.168 E.02303 G1 X122.228 Y106.78 E.02246 G1 X122.661 Y107.26 E.0219 G1 X123.211 Y107.562 E.02122 G1 X123.7 Y107.664 E.01691 G1 X124.241 Y107.624 E.01836 G1 X124.72 Y107.425 E.01758 ;PATH_TASK id=364 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T3000 G1 X124.681 Y107.413 F21000 G1 X124.681 Y107.413 G1 X124.64 Y106.758 G1 X124.783 Y106.691 G1 X124.82 Y106.772 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X124.872 Y106.876 E.00392 G1 X125.198 Y107.205 E.01568 G1 X125.672 Y107.424 E.01764 G1 X126.219 Y107.475 E.01861 G1 X126.724 Y107.382 E.01739 G1 X127.18 Y107.137 E.0175 G1 X127.535 Y106.774 E.01722 G1 X127.774 Y106.31 E.01765 G1 X127.877 Y105.784 E.01815 G1 X127.859 Y105.241 E.01839 G1 X127.703 Y104.719 E.01843 G1 X127.425 Y104.301 E.01699 G1 X127.027 Y103.972 E.01749 G1 X126.547 Y103.781 E.01747 G1 X126.251 Y103.747 E.01008 G1 X125.666 Y103.804 E.01992 G1 X125.213 Y104.027 E.01707 G1 X124.859 Y104.402 E.01746 G1 X124.778 Y104.282 E.00491 G1 X124.422 Y104.024 E.01488 G1 X123.991 Y103.91 E.01509 G1 X123.496 Y103.947 E.01682 G1 X123.051 Y104.143 E.01644 G1 X122.686 Y104.478 E.01679 G1 X122.429 Y104.953 E.01828 G1 X122.334 Y105.456 E.01733 G1 X122.363 Y105.971 E.01747 G1 X122.53 Y106.456 E.01736 G1 X122.843 Y106.857 E.01722 G1 X123.245 Y107.12 E.01624 G1 X123.72 Y107.234 E.01653 G1 X124.172 Y107.201 E.01535 G1 X124.573 Y107.022 E.01485 G1 X124.792 Y106.801 E.01056 ;PATH_TASK id=365 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1 F720 G1 X124.749 Y106.707 Z1 F21000 G1 X124.681 Y107.413 G1 X124.653 Y107.428 G1 X124.627 Y107.443 G1 X123.671 Y113.205 G1 X123.728 Y113.087 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall G1 F10200 G1 X123.559 Y113.086 E.00569 G1 X122.871 Y113.28 E.02421 G1 X122.362 Y113.627 E.02085 G1 X121.985 Y114.122 E.02108 G1 X121.782 Y114.713 E.02114 G1 X121.75 Y115.371 E.02232 G1 X121.9 Y116.029 E.02284 G1 X122.23 Y116.592 E.02208 G1 X122.702 Y117.026 E.02171 G1 X123.266 Y117.323 E.02158 G1 X123.913 Y117.509 E.02277 G1 X124.54 Y117.595 E.02145 G1 X125.237 Y117.617 E.0236 G1 X125.774 Y117.587 E.0182 G1 X126.343 Y117.489 E.01954 G1 X126.961 Y117.255 E.02239 G1 X127.473 Y116.881 E.02145 G1 X127.881 Y116.339 E.02295 G1 X128.101 Y115.716 E.02236 G1 X128.136 Y115.028 E.02333 G1 X127.975 Y114.376 E.02272 G1 X127.64 Y113.834 E.02157 G1 X127.159 Y113.42 E.02148 G1 X126.555 Y113.142 E.02252 G1 X126.035 Y113.039 E.01793 G1 X125.578 Y113.058 E.01548 G1 X125.061 Y113.121 E.01763 G1 X124.542 Y113.355 E.01928 G1 X124.288 Y113.55 E.01085 G1 X124.158 Y113.275 E.01029 G1 X123.977 Y113.136 E.00773 G1 X123.85 Y113.088 E.00461 G1 X123.768 Y113.088 E.00277 ;PATH_TASK id=366 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T3000 G1 X123.703 Y113.22 F21000 G1 X123.811 Y113.273 G1 X123.702 Y113.498 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X123.146 Y113.625 E.01929 G1 X122.733 Y113.866 E.01618 G1 X122.414 Y114.228 E.01633 G1 X122.209 Y114.746 E.01889 G1 X122.172 Y115.294 E.01857 G1 X122.279 Y115.829 E.01847 G1 X122.531 Y116.287 E.01771 G1 X122.909 Y116.651 E.01777 G1 X123.353 Y116.897 E.01715 G1 X123.947 Y117.079 E.02103 G1 X124.541 Y117.165 E.02033 G1 X125.131 Y117.192 E.01998 G1 X125.647 Y117.171 E.0175 G1 X126.204 Y117.083 E.01906 G1 X126.723 Y116.899 E.01865 G1 X127.142 Y116.608 E.01727 G1 X127.483 Y116.181 E.0185 G1 X127.674 Y115.68 E.01816 G1 X127.715 Y115.112 E.01925 G1 X127.601 Y114.585 E.01829 G1 X127.347 Y114.147 E.0171 G1 X126.968 Y113.803 E.01734 G1 X126.471 Y113.563 E.01868 G1 X125.931 Y113.457 E.01864 G1 X125.197 Y113.528 E.02497 G1 X124.723 Y113.744 E.01761 G1 X124.318 Y114.105 E.01835 ;PATH_TASK id=367 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.49354 G1 F9986.241 G1 X124.208 Y114.232 E.00631 ;PATH_TASK id=368 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.537081 G1 F9106.344 G1 X124.098 Y114.359 E.00692 ;PATH_TASK id=369 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.580622 G1 F8368.947 G1 X123.988 Y114.487 E.00753 ;PATH_TASK id=370 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X123.96 Y114.344 E.0065 ;PATH_TASK id=371 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.537081 G1 F9106.344 G1 X123.933 Y114.201 E.00597 ;PATH_TASK id=372 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.49354 G1 F9986.241 G1 X123.906 Y114.058 E.00545 ;PATH_TASK id=366 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X123.883 Y113.669 E.01319 G1 X123.837 Y113.56 E.00402 G1 X123.738 Y113.515 E.00368 ;PATH_TASK id=373 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1 F720 G1 X123.958 Y113.532 Z1 F21000 G1 X123.92 Y114.02 G1 X123.75 Y115.954 G1 X124.088 Y116.202 G1 X124.088 Y116.202 G1 X124.105 Y116.212 G1 X124.187 Y116.066 G1 Z.4 F720 G1 E.7 F1500 G1 F10200 G1 X123.696 Y115.919 E.01732 G1 X123.389 Y115.715 E.01249 G1 X123.221 Y115.511 E.00894 G1 X123.14 Y115.274 E.0085 G1 X123.172 Y114.942 E.01128 G1 X123.32 Y114.736 E.00859 ;PATH_TASK id=374 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X123.529 Y114.626 E.00799 ;PATH_TASK id=375 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.475433 G1 X123.663 Y114.605 E.00488 ;PATH_TASK id=376 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.500867 G1 F9826.465 G1 X123.797 Y114.583 E.00517 ;PATH_TASK id=377 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.541469 G1 F9026.203 G1 X123.884 Y114.551 E.00384 ;PATH_TASK id=378 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.58207 G1 F8346.472 G1 X123.971 Y114.519 E.00416 G1 X123.967 Y114.568 E.00223 ;PATH_TASK id=379 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.565181 G1 F8616.381 G1 X123.961 Y114.737 E.00735 ;PATH_TASK id=380 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.526787 G1 F9300.077 G1 X123.954 Y114.906 E.00681 ;PATH_TASK id=381 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.488393 G1 F10101.622 G1 X123.947 Y115.075 E.00627 ;PATH_TASK id=373 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X124.004 Y115.587 E.01741 G1 X124.216 Y116.064 E.01767 ;PATH_TASK id=382 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X124.323 Y115.927 Z1 F21000 G1 X123.38 Y115.165 G1 X123.87 Y114.47 G1 X123.92 Y114.02 G1 X123.972 Y113.351 G1 X123.52 Y113.131 G1 X123.479 Y113.137 G1 X123.439 Y113.144 G1 X123.399 Y113.151 G1 X123.358 Y113.159 G1 X123.319 Y113.168 G1 X123.279 Y113.177 G1 X123.24 Y113.187 G1 X123.201 Y113.198 G1 X123.162 Y113.209 G1 X123.123 Y113.222 G1 X123.085 Y113.234 G1 X123.047 Y113.248 G1 X123.009 Y113.262 G1 X122.972 Y113.277 G1 X122.935 Y113.293 G1 X122.898 Y113.309 G1 X122.862 Y113.327 G1 X122.826 Y113.344 G1 X122.79 Y113.363 G1 X122.755 Y113.383 G1 X122.72 Y113.403 G1 X122.686 Y113.424 G1 X122.652 Y113.445 G1 X122.618 Y113.467 G1 X122.585 Y113.49 G1 X122.553 Y113.514 G1 X122.521 Y113.539 G1 X122.49 Y113.564 G1 X122.459 Y113.59 G1 X122.429 Y113.616 G1 X122.399 Y113.643 G1 X122.37 Y113.671 G1 X122.341 Y113.699 G1 X122.313 Y113.728 G1 X122.287 Y113.756 G1 X122.266 Y113.78 G1 X122.244 Y113.805 G1 X122.22 Y113.834 G1 X122.196 Y113.864 G1 X122.173 Y113.895 G1 X122.15 Y113.925 G1 X122.128 Y113.957 G1 X122.107 Y113.989 G1 X122.086 Y114.021 G1 X122.066 Y114.053 G1 X122.047 Y114.086 G1 X122.028 Y114.12 G1 X122.01 Y114.154 G1 X121.991 Y114.192 G1 X121.971 Y114.234 G1 X121.952 Y114.277 G1 X121.933 Y114.321 G1 X121.916 Y114.365 G1 X121.9 Y114.41 G1 X121.885 Y114.455 G1 X121.871 Y114.5 G1 X121.859 Y114.545 G1 X121.847 Y114.591 G1 X121.836 Y114.638 G1 X121.826 Y114.684 G1 X121.817 Y114.731 G1 X121.81 Y114.778 G1 X121.803 Y114.826 G1 X121.796 Y114.879 G1 X121.79 Y114.937 G1 X121.786 Y114.997 G1 X121.783 Y115.056 G1 X121.781 Y115.115 G1 X121.781 Y115.151 G1 X121.781 Y115.186 G1 X121.782 Y115.236 G1 X121.784 Y115.287 G1 X121.787 Y115.338 G1 X121.79 Y115.388 G1 X121.795 Y115.439 G1 X121.801 Y115.489 G1 X121.808 Y115.539 G1 X121.816 Y115.589 G1 X121.825 Y115.638 G1 X121.836 Y115.687 G1 X121.847 Y115.736 G1 X121.859 Y115.784 G1 X121.873 Y115.833 G1 X121.887 Y115.881 G1 X121.903 Y115.928 G1 X121.92 Y115.975 G1 X121.937 Y116.022 G1 X121.956 Y116.068 G1 X121.977 Y116.113 G1 X121.998 Y116.159 G1 X122.02 Y116.203 G1 X122.043 Y116.247 G1 X122.068 Y116.291 G1 X122.093 Y116.334 G1 X122.12 Y116.376 G1 X122.147 Y116.417 G1 X122.176 Y116.458 G1 X122.205 Y116.499 G1 X122.236 Y116.538 G1 X122.267 Y116.577 G1 X122.299 Y116.615 G1 X122.332 Y116.653 G1 X122.367 Y116.689 G1 X122.401 Y116.725 G1 X122.437 Y116.76 G1 X122.474 Y116.795 G1 X122.511 Y116.829 G1 X122.55 Y116.862 G1 X122.584 Y116.89 G1 X122.619 Y116.917 G1 X122.66 Y116.949 G1 X122.702 Y116.979 G1 X122.745 Y117.009 G1 X122.788 Y117.037 G1 X122.833 Y117.065 G1 X122.878 Y117.092 G1 X122.929 Y117.121 G1 X122.986 Y117.152 G1 X123.044 Y117.181 G1 X123.103 Y117.21 G1 X123.164 Y117.237 G1 X123.225 Y117.263 G1 X123.287 Y117.288 G1 X123.358 Y117.314 G1 X123.436 Y117.341 G1 X123.517 Y117.367 G1 X123.599 Y117.391 G1 X123.683 Y117.414 G1 X123.777 Y117.437 G1 X123.883 Y117.46 G1 X123.992 Y117.481 G1 X124.103 Y117.5 G1 X124.229 Y117.519 G1 X124.371 Y117.536 G1 X124.492 Y117.548 G1 X125.457 Y122.785 G1 X125.458 Y122.749 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall G1 F10200 G1 X125.385 Y122.749 E.00247 G1 X125.115 Y122.857 E.00986 G1 X124.99 Y122.976 E.00585 G1 X124.858 Y123.408 E.01527 G1 X122.229 Y123.363 E.089 G1 X121.995 Y123.405 E.00805 G1 X121.738 Y123.597 E.01086 G1 X121.608 Y123.963 E.01314 G1 X121.608 Y124.646 E.0231 G1 X121.849 Y125.033 E.01546 G1 X125.142 Y127.437 E.13799 G1 X125.429 Y127.508 E.01 G1 X126.204 Y127.501 E.02624 G1 X126.503 Y127.327 E.01173 G1 X126.621 Y127.146 E.0073 G1 X126.669 Y126.919 E.00786 G1 X126.695 Y125.36 E.05276 G1 X127.282 Y125.37 E.01985 G1 X127.518 Y125.327 E.00811 G1 X127.774 Y125.135 E.01084 G1 X127.903 Y124.77 E.0131 G1 X127.915 Y124.071 E.02369 G1 X127.835 Y123.759 E.01088 G1 X127.642 Y123.552 E.00959 G1 X127.387 Y123.455 E.00925 G1 X126.728 Y123.44 E.02231 G1 X126.646 Y123.058 E.01322 G1 X126.399 Y122.822 E.01156 G1 X126.088 Y122.753 E.01077 G1 X125.498 Y122.75 E.01998 ;PATH_TASK id=383 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T3000 G1 X125.497 Y122.786 F21000 G1 X125.48 Y122.786 G1 X125.473 Y123.171 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X125.364 Y123.205 E.00387 G1 X125.288 Y123.35 E.00554 G1 X125.28 Y123.844 E.0167 G1 X122.222 Y123.792 E.10351 G1 X122.076 Y123.861 E.00549 G1 X122.037 Y123.971 E.00392 G1 X122.027 Y124.537 E.01918 G1 X122.102 Y124.687 E.00568 G1 X125.332 Y127.045 E.13535 G1 X125.436 Y127.08 E.00372 G1 X126.146 Y127.068 E.02404 G1 X126.238 Y126.94 E.00532 G1 X126.274 Y124.925 E.06822 G1 X127.289 Y124.942 E.03436 G1 X127.436 Y124.872 E.0055 G1 X127.474 Y124.763 E.00391 G1 X127.462 Y123.97 E.02683 G1 X127.342 Y123.882 E.00505 G1 X126.292 Y123.861 E.03555 G1 X126.276 Y123.273 E.0199 G1 X126.15 Y123.185 E.0052 G1 X125.513 Y123.172 E.02156 ;PATH_TASK id=384 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1 F720 G1 X125.52 Y122.787 Z1 F21000 G1 X126.696 Y122.807 G1 X127.881 Y123.502 G1 X127.65 Y137.093 G1 X127.093 Y137.08 G1 X127.091 Y137.192 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.619961 G1 F7798.407 G1 X127.212 Y137.195 E.00581 ;PATH_TASK id=385 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.615672 G1 F7856.804 G1 X127.275 Y137.146 E.00381 ;PATH_TASK id=386 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.574254 G1 F8469.254 G1 X127.338 Y137.096 E.00354 ;PATH_TASK id=387 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.532836 G1 F9185.258 G1 X127.401 Y137.046 E.00326 ;PATH_TASK id=388 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.491418 G1 F10033.506 G1 X127.464 Y136.997 E.00299 ;PATH_TASK id=389 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X127.67 Y136.709 E.01201 G1 X127.703 Y136.523 E.00639 G1 X127.76 Y133.131 E.11481 G1 X127.646 Y132.765 E.01301 G1 X127.396 Y132.562 E.01089 G1 X127.16 Y132.51 E.00816 G1 X126.484 Y132.499 E.02288 G1 X126.227 Y132.551 E.0089 G1 X125.994 Y132.732 E.00996 G1 X125.868 Y133.037 E.01118 G1 X125.848 Y133.987 E.03215 G1 X125.576 Y133.665 E.01427 G1 X125.135 Y133.207 E.02151 G1 X124.601 Y132.794 E.02284 G1 X123.979 Y132.526 E.02294 G1 X123.371 Y132.461 E.02068 G1 X122.738 Y132.583 E.02183 G1 X122.21 Y132.881 E.02052 G1 X121.787 Y133.337 E.02105 G1 X121.52 Y133.9 E.02111 ;PATH_TASK id=390 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.496054 G1 F9930.837 G1 X121.473 Y134.023 E.00495 ;PATH_TASK id=391 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.542109 G1 F9014.622 G1 X121.426 Y134.145 E.00545 ;PATH_TASK id=392 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.588164 G1 F8253.186 G1 X121.379 Y134.268 E.00596 ;PATH_TASK id=393 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.634219 G1 F7610.363 G1 X121.332 Y134.391 E.00646 G1 X121.323 Y134.524 E.00654 ;PATH_TASK id=394 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.635179 G1 F7598.027 G1 X121.338 Y135.058 E.02633 G1 X121.388 Y135.221 E.00839 ;PATH_TASK id=395 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.589089 G1 F8239.208 G1 X121.48 Y135.422 E.01004 ;PATH_TASK id=396 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.542726 G1 F9003.499 G1 X121.572 Y135.623 E.00919 ;PATH_TASK id=397 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.496363 G1 F9924.084 G1 X121.664 Y135.824 E.00834 ;PATH_TASK id=398 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X122.036 Y136.331 E.02129 G1 X122.525 Y136.684 E.0204 ;PATH_TASK id=399 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X122.993 Y136.861 E.01695 G1 X123.516 Y136.949 E.01794 G1 X123.825 Y136.865 E.01087 G1 X124.064 Y136.607 E.01189 G1 X124.119 Y136.433 E.00618 G1 X124.208 Y135.695 E.02516 G1 X124.156 Y135.513 E.00641 ;PATH_TASK id=400 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.420206 G1 X124.104 Y135.331 E.00594 ;PATH_TASK id=401 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.390413 G1 X124.044 Y135.25 E.0029 ;PATH_TASK id=402 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.4236 G1 X123.872 Y135.132 E.0066 ;PATH_TASK id=403 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.462461 G1 X123.701 Y135.013 E.00727 ;PATH_TASK id=404 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.489531 G1 F10075.882 G1 X123.549 Y134.975 E.00583 ;PATH_TASK id=405 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.516601 G1 F9500.064 G1 X123.396 Y134.936 E.00618 G1 X123.288 Y134.834 E.00585 G1 X123.279 Y134.592 E.00957 G1 X123.348 Y134.47 E.00549 G1 X123.456 Y134.445 E.00438 G1 X123.823 Y134.615 E.01594 ;PATH_TASK id=406 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.484214 G1 F10197.283 G1 X124.024 Y134.777 E.00944 ;PATH_TASK id=407 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.436327 G1 F10200 G1 X124.224 Y134.938 E.00842 ;PATH_TASK id=408 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.390413 G1 X124.387 Y135.132 E.00731 ;PATH_TASK id=409 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.420206 G1 X124.543 Y135.34 E.00816 ;PATH_TASK id=410 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X124.699 Y135.548 E.00881 G1 X125.158 Y136.091 E.02407 G1 X125.618 Y136.533 E.02157 G1 X126.186 Y136.903 E.02295 ;PATH_TASK id=411 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.49249 G1 F10009.575 G1 X126.332 Y136.974 E.00609 ;PATH_TASK id=412 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.53498 G1 F9145.226 G1 X126.479 Y137.044 E.00666 ;PATH_TASK id=413 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.577471 G1 F8418.288 G1 X126.626 Y137.115 E.00724 ;PATH_TASK id=384 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.619961 G1 F7798.407 G1 X126.773 Y137.185 E.00781 G1 X127.051 Y137.192 E.01335 ;PATH_TASK id=414 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T3000 G1 X127.053 Y137.079 F21000 G1 X127.069 Y137.08 G1 X127.078 Y136.694 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X127.203 Y136.657 E.0044 G1 X127.271 Y136.544 E.00448 G1 X127.332 Y133.124 E.11577 G1 X127.298 Y133.015 E.00388 G1 X127.153 Y132.939 E.00553 G1 X126.4 Y132.943 E.02548 G1 X126.298 Y133.065 E.00539 G1 X126.258 Y135.117 E.06947 G1 X126.182 Y135.047 E.0035 G1 X125.272 Y133.967 E.04779 G1 X124.882 Y133.555 E.01922 G1 X124.453 Y133.204 E.01874 G1 X123.966 Y132.966 E.01838 G1 X123.485 Y132.885 E.01649 G1 X122.986 Y132.949 E.01702 G1 X122.555 Y133.155 E.01618 G1 X122.2 Y133.491 E.01655 G1 X121.941 Y133.981 E.01877 G1 X121.843 Y134.489 E.01751 G1 X121.859 Y135.038 E.01859 G1 X121.999 Y135.539 E.01759 G1 X122.259 Y135.949 E.01644 G1 X122.676 Y136.283 E.01809 G1 X123.145 Y136.46 E.01695 G1 X123.487 Y136.518 E.01175 G1 X123.608 Y136.495 E.00417 G1 X123.696 Y136.367 E.00527 G1 X123.782 Y135.644 E.02464 G1 X123.723 Y135.487 E.00569 G1 X123.233 Y135.378 E.01698 G1 X123.007 Y135.24 E.00897 G1 X122.854 Y135.018 E.00913 G1 X122.795 Y134.724 E.01013 G1 X122.838 Y134.405 E.01092 G1 X122.974 Y134.172 E.00913 G1 X123.182 Y134.019 E.00872 G1 X123.414 Y133.968 E.00807 G1 X123.71 Y134.023 E.01018 G1 X124.077 Y134.241 E.01446 G1 X124.501 Y134.653 E.02001 G1 X125.449 Y135.774 E.04968 G1 X125.837 Y136.16 E.01854 G1 X126.297 Y136.481 E.01899 G1 X126.762 Y136.662 E.01688 G1 X127.038 Y136.69 E.00941 ;PATH_TASK id=415 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1 F720 G1 X127.029 Y137.079 Z1 F21000 G1 X129.389 Y137.889 G1 X129.775 Y138.275 G1 Z.4 F720 G1 E.7 F1500 G1 F10200 G1 X120.225 Y138.275 E.32326 G1 X120.225 Y81.725 E1.91415 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y138.235 E1.91279 ;PATH_TASK id=416 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X129.389 Y137.889 Z1 F21000 G1 X126.518 Y136.999 G1 X126.485 Y136.988 G1 X126.452 Y136.976 G1 X126.424 Y136.966 G1 X126.398 Y136.956 G1 X126.347 Y136.935 G1 X126.292 Y136.911 G1 X126.239 Y136.886 G1 X126.185 Y136.86 G1 X126.132 Y136.832 G1 X126.08 Y136.803 G1 X126.028 Y136.773 G1 X125.976 Y136.742 G1 X125.925 Y136.709 G1 X125.875 Y136.676 G1 X125.825 Y136.641 G1 X125.775 Y136.605 G1 X125.726 Y136.567 G1 X125.677 Y136.529 G1 X125.63 Y136.49 G1 X125.597 Y136.463 G1 X125.562 Y136.433 G1 X125.498 Y136.374 G1 X125.433 Y136.313 G1 X125.368 Y136.249 G1 X125.302 Y136.182 G1 X125.235 Y136.112 G1 X125.167 Y136.038 G1 X125.077 Y135.937 G1 X124.972 Y135.815 G1 X124.919 Y135.751 G1 X124.577 Y136.035 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.452962 G1 F10974.492 G1 X124.514 Y136.525 E.01686 G1 X124.396 Y136.835 E.01128 G1 X124.002 Y137.238 E.01924 ;PATH_TASK id=417 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.485741 G1 F10162.131 G1 X123.851 Y137.314 E.00622 ;PATH_TASK id=418 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.528042 G1 F9276.027 G1 X123.7 Y137.39 E.00681 ;PATH_TASK id=419 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.524394 G1 F9346.304 G1 X123.946 Y137.415 E.0099 ;PATH_TASK id=420 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.452713 G1 F10981.155 G1 X124.192 Y137.439 E.00843 G1 X126.008 Y137.439 E.06186 G1 X126.287 Y137.409 E.00958 G1 X125.818 Y137.166 E.01798 G1 X125.249 Y136.754 E.02395 G1 X124.839 Y136.346 E.0197 G1 X124.603 Y136.065 E.01251 ;PATH_TASK id=421 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X124.869 Y136.931 F21000 ;WIDTH:0.54421 G1 F8976.84 G1 X124.806 Y136.931 E.00261 G1 X124.775 Y136.985 E.00261 G1 X124.806 Y137.039 E.00261 G1 X124.869 Y137.039 E.00261 G1 X124.88 Y137.02 E.00094 ;PATH_TASK id=422 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X122.871 Y137.345 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.621809 G1 F7773.511 G1 X123.072 Y137.362 E.00971 ;PATH_TASK id=423 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.587747 G1 F8259.503 G1 X123.273 Y137.379 E.00914 ;PATH_TASK id=424 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.55438 G1 F8798.357 G1 X123.474 Y137.396 E.00858 G1 X123.66 Y137.391 E.00791 ;PATH_TASK id=425 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X121.545 Y136.932 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.543036 G1 F8997.913 G1 X121.483 Y136.932 E.0026 G1 X121.452 Y136.986 E.0026 G1 X121.483 Y137.04 E.0026 G1 X121.545 Y137.04 E.0026 G1 X121.557 Y137.02 E.00094 ;PATH_TASK id=426 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X121.11 Y135.652 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X121.061 Y135.865 E.00742 G1 X121.061 Y137.439 E.05328 G1 X122.312 Y137.439 E.04236 ;PATH_TASK id=427 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.470143 G1 F10533.146 G1 X122.437 Y137.419 E.0045 ;PATH_TASK id=428 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.510431 G1 F9625.457 G1 X122.562 Y137.399 E.00493 ;PATH_TASK id=429 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.550718 G1 F8861.795 G1 X122.687 Y137.379 E.00535 ;PATH_TASK id=430 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.591006 G1 F8210.401 G1 X122.813 Y137.359 E.00578 ;PATH_TASK id=431 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.624995 G1 F7730.969 G1 X122.871 Y137.345 E.00289 ;PATH_TASK id=432 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.615235 G1 F7862.805 G1 X122.748 Y137.275 E.00672 ;PATH_TASK id=433 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.568025 G1 F8569.721 G1 X122.626 Y137.205 E.00617 ;PATH_TASK id=434 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.520815 G1 F9416.307 G1 X122.503 Y137.135 E.00561 ;PATH_TASK id=435 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.453272 G1 F10966.208 G3 X122.096 Y136.9 I23.107 J-40.506 E.01603 G1 X121.595 Y136.448 E.02302 G1 X121.219 Y135.822 E.02491 G1 X121.131 Y135.685 E.00554 ;PATH_TASK id=436 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X121.091 Y133.818 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.457902 G1 F10843.843 G1 X121.31 Y133.512 E.01299 ;PATH_TASK id=437 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.395542 G1 F12000 G1 X121.53 Y133.206 E.01103 G1 X122.214 Y132.525 E.02832 G1 X122.335 Y132.439 E.00435 ;PATH_TASK id=438 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X125.459 Y132.929 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.473074 G1 F10461.386 G1 X125.572 Y132.772 E.00691 ;PATH_TASK id=439 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.437012 G1 F11418.653 G1 X125.684 Y132.615 E.00633 ;PATH_TASK id=440 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.411658 G1 F12000 G1 X125.797 Y132.458 E.00592 G1 X125.833 Y132.424 E.00151 ;PATH_TASK id=441 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X127.398 Y132.4 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.45 G1 F11054.338 G1 X129 Y130.798 E.0767 G1 X129 Y130.222 E.01949 G1 X127.06 Y132.163 E.0929 G1 X126.494 Y132.153 E.01916 G1 X129 Y129.646 E.12 G1 X129 Y129.071 E.01949 G1 X125.232 Y132.839 E.18041 G1 X124.939 Y132.601 E.01278 G1 X124.913 Y132.582 E.00108 G1 X129 Y128.495 E.19566 G1 X129 Y127.919 E.01949 G1 X124.538 Y132.381 E.2136 G1 X124.261 Y132.25 E.01038 G2 X124.137 Y132.207 I-.383 J.917 E.00445 G1 X129 Y127.343 E.23282 G1 X129 Y126.768 E.01949 G1 X123.643 Y132.125 E.25647 G2 X123.453 Y132.108 I-.212 J1.282 E.00646 G1 X123.327 Y132.117 E.00426 G1 X123.033 Y132.159 E.01006 G1 X129 Y126.192 E.28566 G1 X129 Y125.616 E.01949 G1 X121 Y133.617 E.383 G1 X121 Y133.042 E.01949 G1 X126.185 Y127.856 E.24823 G3 X126.045 Y127.865 I-.122 J-.828 E.00476 G1 X125.608 Y127.857 E.01479 G1 X121 Y132.466 E.2206 G1 X121 Y131.89 E.01949 G1 X125.099 Y127.791 E.19625 G1 X125.007 Y127.751 E.0034 G3 X124.877 Y127.672 I.431 J-.85 E.00514 G1 X124.741 Y127.573 E.0057 G1 X121 Y131.314 E.17911 G1 X121 Y130.739 E.01949 G1 X124.408 Y127.33 E.16318 G1 X124.076 Y127.087 E.01395 G1 X120.816 Y130.346 E.15602 ;PATH_TASK id=442 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X121.134 Y124.729 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.593105 G1 F8179.067 G1 X121.13 Y124.07 E.03012 ;PATH_TASK id=443 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.568236 G1 F8566.283 G1 X121.204 Y123.945 E.00635 ;PATH_TASK id=444 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.527055 G1 F9294.944 G1 X121.278 Y123.82 E.00585 ;PATH_TASK id=445 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.485873 G1 F10159.091 G1 X121.352 Y123.695 E.00536 ;PATH_TASK id=446 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.444692 G1 F11200.386 G1 X121.427 Y123.57 E.00486 ;PATH_TASK id=447 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.395266 G1 F12000 G1 X121.501 Y123.445 E.00426 G1 X121.757 Y123.222 E.00995 ;PATH_TASK id=448 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X121.134 Y124.729 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.57282 G1 F8492.171 G1 X121.11 Y124.968 E.01061 ;PATH_TASK id=449 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.523692 G1 F9359.955 G1 X121.085 Y125.208 E.00962 ;PATH_TASK id=450 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.450596 G1 F11038.186 G1 X121.061 Y125.447 E.00816 G1 X121.061 Y129.239 E.12852 G1 X123.533 Y126.766 E.11852 G1 X121.609 Y125.362 E.08073 ;PATH_TASK id=451 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.467728 G1 F10593.041 G1 X121.469 Y125.18 E.00811 ;PATH_TASK id=452 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.503184 G1 F9777.008 G1 X121.329 Y124.998 E.00878 ;PATH_TASK id=453 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.53864 G1 F9077.708 G1 X121.189 Y124.816 E.00946 ;PATH_TASK id=454 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.556368 G1 F8764.276 G1 X121.156 Y124.763 E.00272 ;PATH_TASK id=455 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X121.468 Y125.763 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X121.468 Y128.256 E.08438 G1 X122.909 Y126.815 E.06898 G1 X121.5 Y125.786 E.05904 ;PATH_TASK id=456 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X121.854 Y126.523 F21000 ;WIDTH:0.408258 G1 F12000 G1 X121.854 Y127.323 E.02432 G1 X122.317 Y126.861 E.01988 G1 X121.886 Y126.546 E.01619 ;PATH_TASK id=457 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X121.637 Y124.825 Z1 F21000 G1 X121.661 Y123.396 G1 X124.912 Y122.776 G1 X126.696 Y122.807 G1 X126.642 Y123.143 G1 X126.837 Y123.174 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.45 G1 F11054.338 G1 X129 Y121.011 E.10355 G1 X129 Y120.435 E.01949 G1 X126.763 Y122.672 E.10709 G1 X126.561 Y122.514 E.00868 G1 X126.4 Y122.46 E.00576 G1 X129 Y119.859 E.12448 G1 X129 Y119.284 E.01949 G1 X125.88 Y122.404 E.14936 G1 X125.484 Y122.397 E.01341 G1 X125.429 Y122.398 E.00186 G1 X125.327 Y122.407 E.00349 G1 X125.293 Y122.416 E.00118 G1 X129 Y118.708 E.17748 G1 X129 Y118.132 E.01949 G1 X124.084 Y123.049 E.23534 G1 X123.518 Y123.039 E.01916 G1 X129 Y117.557 E.26244 G1 X129 Y116.981 E.01949 G1 X122.952 Y123.029 E.28954 G1 X122.386 Y123.02 E.01916 G1 X129 Y116.405 E.31663 G1 X129 Y115.829 E.01949 G1 X121 Y123.83 E.383 G1 X121 Y123.255 E.01949 G1 X126.432 Y117.822 E.26005 G1 X126.307 Y117.854 E.00437 G1 X125.783 Y117.935 E.01795 G1 X125.739 Y117.94 E.0015 G1 X121 Y122.679 E.22687 G1 X121 Y122.103 E.01949 G1 X125.137 Y117.966 E.19805 G1 X125.107 Y117.966 E.00101 G1 X124.584 Y117.943 E.01773 G1 X120.816 Y121.711 E.18034 ;PATH_TASK id=458 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X121.858 Y117.887 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.415703 G1 F12000 G1 X121.858 Y118.679 E.02455 G1 X122.343 Y118.193 E.02129 G1 X121.904 Y117.926 E.01594 G1 X121.888 Y117.912 E.00064 ;PATH_TASK id=459 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X121.468 Y116.919 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X121.468 Y119.62 E.09144 G1 X123.008 Y118.08 E.07375 G1 X122.729 Y117.971 E.01016 G1 X122.107 Y117.593 E.02462 G1 X121.49 Y116.952 E.03011 ;PATH_TASK id=460 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X121.504 Y114.365 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.392748 G1 F12000 G1 X121.105 Y114.761 E.01636 G1 X121.033 Y114.756 E.00208 G1 X121.027 Y115.261 E.01469 ;PATH_TASK id=461 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.396321 G1 X121.041 Y115.61 E.01027 ;PATH_TASK id=462 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.448469 G1 F11096.081 G1 X121.054 Y115.959 E.01179 G1 X121.061 Y116.778 E.0276 G1 X121.061 Y120.603 E.129 G1 X123.772 Y117.892 E.12931 G1 X122.983 Y117.643 E.02789 G1 X122.319 Y117.245 E.02611 G1 X121.789 Y116.676 E.02622 G1 X121.459 Y115.975 E.02614 ;PATH_TASK id=463 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.426557 G1 F11729.838 G1 X121.413 Y115.631 E.01105 ;PATH_TASK id=464 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.395194 G1 F12000 G1 X121.368 Y115.288 E.01014 G1 X121.403 Y114.684 E.01773 G1 X121.492 Y114.403 E.00863 ;PATH_TASK id=465 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X122.79 Y112.959 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.38292 G1 F12000 G1 X122.726 Y112.996 E.00208 G1 X122.79 Y113.033 E.00208 G1 X122.791 Y113.031 E.00007 ;PATH_TASK id=466 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X127.408 Y113.105 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.458083 G1 F10839.12 G1 X127.939 Y113.56 E.02416 G1 X128.118 Y113.796 E.0102 G1 X128.437 Y114.417 E.02412 G1 X128.521 Y114.972 E.01936 G1 X128.555 Y115.242 E.00941 G1 X128.533 Y115.426 E.0064 G1 X128.864 Y115.097 E.0161 G1 X128.935 Y115.099 E.00246 G1 X128.916 Y114.444 E.02264 G1 X128.939 Y113.607 E.02892 G1 X128.939 Y111.573 E.07021 G1 X127.436 Y113.076 E.07339 ;PATH_TASK id=467 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X128.014 Y113.079 F21000 ;WIDTH:0.458186 G1 F10836.427 G1 X128.263 Y113.307 E.01163 G1 X128.528 Y113.7 E.01638 G1 X128.528 Y112.566 E.03917 G1 X128.043 Y113.051 E.02371 ;PATH_TASK id=468 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X129.184 Y111.041 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.45 G1 F11054.338 G1 X127.181 Y113.044 E.09589 G1 X126.854 Y112.881 E.01234 G1 X126.79 Y112.859 E.00232 G1 X129 Y110.648 E.10583 G1 X129 Y110.073 E.01949 G1 X126.328 Y112.745 E.12792 G1 X126.1 Y112.7 E.00788 G2 X125.991 Y112.685 I-.185 J.94 E.00374 G1 X125.885 Y112.682 E.00357 G1 X125.809 Y112.688 E.00259 G1 X129 Y109.497 E.15278 G1 X129 Y108.921 E.01949 G1 X125.17 Y112.751 E.18335 G1 X125.136 Y112.755 E.00116 G1 X125.034 Y112.771 E.00349 G1 X124.96 Y112.79 E.0026 G1 X124.836 Y112.837 E.0045 G1 X124.408 Y113.036 E.01597 G1 X124.353 Y112.993 E.00237 G1 X129 Y108.345 E.22249 G1 X129 Y107.77 E.01949 G1 X123.999 Y112.771 E.23942 G1 X123.913 Y112.747 E.00302 G1 X123.805 Y112.729 E.0037 G1 X123.707 Y112.723 E.00334 G2 X123.603 Y112.729 I-.003 J1.002 E.00352 G1 X123.484 Y112.748 E.00408 G1 X123.434 Y112.76 E.00174 G1 X129 Y107.194 E.26646 G1 X129 Y106.618 E.01949 G1 X121 Y114.619 E.383 G1 X121 Y114.044 E.01949 G1 X126.917 Y108.126 E.28325 G1 X126.807 Y108.163 E.0039 G1 X126.324 Y108.242 E.01659 G3 X126.213 Y108.254 I-.15 J-.911 E.00375 G1 X121 Y113.468 E.24959 G1 X121 Y112.892 E.01949 G1 X125.687 Y108.205 E.22437 G3 X125.465 Y108.172 I.154 J-1.793 E.00759 G1 X125.362 Y108.141 E.00364 G3 X125.232 Y108.084 I.689 J-1.763 E.00481 G1 X121 Y112.316 E.20261 G1 X121 Y111.741 E.01949 G1 X124.841 Y107.899 E.18388 G1 X124.83 Y107.894 E.00041 G1 X124.721 Y107.81 E.00467 G1 X124.564 Y107.885 E.00588 G1 X124.468 Y107.924 E.00352 G1 X124.293 Y107.967 E.00607 G1 X124.188 Y107.977 E.00358 G1 X120.816 Y111.348 E.1614 ;PATH_TASK id=469 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X120.611 Y111.348 Z1 F21000 G1 X120.611 Y82.111 G1 X129.389 Y82.111 G1 X129.389 Y106.236 G1 X128.58 Y106.236 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.366256 G1 F12000 G1 X128.911 Y105.909 E.0125 G1 X128.982 Y105.916 E.00192 G1 X128.98 Y105.209 E.01901 ;PATH_TASK id=470 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.389408 G1 X128.96 Y104.815 E.01137 ;PATH_TASK id=471 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449195 G1 F11076.238 G1 X128.939 Y104.421 E.01333 G1 X128.939 Y100.635 E.12791 G1 X126.626 Y102.949 E.11054 G1 X127.309 Y103.178 E.02437 G1 X127.558 Y103.326 E.00978 G1 X128.081 Y103.79 E.02361 G1 X128.48 Y104.425 E.02534 ;PATH_TASK id=472 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.431225 G1 F11588.843 G1 X128.565 Y104.798 E.01234 ;PATH_TASK id=473 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.382831 G1 F12000 G1 X128.651 Y105.171 E.01081 G1 X128.661 Y105.887 E.02025 G1 X128.589 Y106.197 E.00899 ;PATH_TASK id=474 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X128.532 Y103.731 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F11054.364 G1 X128.532 Y101.617 E.07154 G1 X127.381 Y102.769 E.05511 G1 X127.828 Y103.022 E.01739 G1 X128.351 Y103.486 E.02366 G1 X128.509 Y103.699 E.00897 ;PATH_TASK id=475 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X128.124 Y102.623 F21000 ;WIDTH:0.5111 G1 F9611.688 G1 X128.065 Y102.623 E.00228 G1 X128.036 Y102.674 E.00228 G1 X128.065 Y102.725 E.00228 G1 X128.124 Y102.725 E.00228 G1 X128.133 Y102.709 E.00072 ;PATH_TASK id=476 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X129.184 Y100.103 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.450008 G1 F11054.12 G1 X126.14 Y103.146 E.1457 ;PATH_TASK id=477 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X128.838 Y99.017 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.652748 G1 F7379.13 G1 X128.838 Y99.412 E.02001 ;PATH_TASK id=478 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X128.838 Y99.017 F21000 ;WIDTH:0.632473 G1 F7632.9 G1 X128.858 Y98.935 E.00416 ;PATH_TASK id=479 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.591924 G1 F8196.672 G1 X128.879 Y98.852 E.00388 ;PATH_TASK id=480 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.551374 G1 F8850.367 G1 X128.899 Y98.77 E.00359 ;PATH_TASK id=481 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.510824 G1 F9617.365 G1 X128.919 Y98.688 E.0033 ;PATH_TASK id=482 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.451055 G1 F11025.777 G1 X128.939 Y98.605 E.00288 G1 X128.939 Y97.059 E.05246 ;PATH_TASK id=483 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.473584 G1 F10448.999 G1 X128.916 Y96.775 E.01021 ;PATH_TASK id=484 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.520752 G1 F9417.54 G1 X128.892 Y96.491 E.01133 ;PATH_TASK id=485 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.549547 G1 F8882.274 G1 X128.887 Y96.451 E.00168 ;PATH_TASK id=486 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.537299 G1 F9102.344 G1 X128.801 Y96.649 E.00886 ;PATH_TASK id=487 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.502379 G1 F9794.137 G1 X128.716 Y96.847 E.00823 ;PATH_TASK id=488 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.451298 G1 F11019.221 G1 X128.63 Y97.044 E.00732 G1 X128.484 Y97.3 E.01001 G1 X128.134 Y97.73 E.01882 G1 X127.631 Y98.092 E.02103 G1 X128.054 Y98.132 E.01444 G1 X128.334 Y98.281 E.01076 G1 X128.636 Y98.644 E.01603 ;PATH_TASK id=489 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.470274 G1 F10529.913 G1 X128.672 Y98.712 E.00273 ;PATH_TASK id=490 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.510824 G1 F9617.365 G1 X128.709 Y98.779 E.00299 ;PATH_TASK id=491 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.551374 G1 F8850.367 G1 X128.746 Y98.847 E.00325 ;PATH_TASK id=492 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.591924 G1 F8196.672 G1 X128.782 Y98.915 E.00351 ;PATH_TASK id=493 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.612199 G1 F7904.747 G1 X128.819 Y98.982 E.00364 ;PATH_TASK id=494 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X128.552 Y97.859 F21000 ;WIDTH:0.46371 G1 F10694.17 G1 X128.499 Y97.859 E.00184 G1 X128.473 Y97.905 E.00184 G1 X128.499 Y97.95 E.00184 G1 X128.552 Y97.95 E.00184 G1 X128.558 Y97.94 E.00044 ;PATH_TASK id=495 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X128.907 Y95.755 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.514412 G1 F9544.17 G1 X128.889 Y96.411 E.02572 ;PATH_TASK id=496 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X128.907 Y95.755 F21000 ;WIDTH:0.498309 G1 F9881.667 G1 X128.923 Y95.412 E.01302 ;PATH_TASK id=497 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.45118 G1 F11022.411 G1 X128.939 Y95.068 E.01168 G1 X128.939 Y90.719 E.14765 ;PATH_TASK id=498 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.463808 G1 F10691.699 G1 X128.926 Y90.492 E.00794 ;PATH_TASK id=499 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.481633 G1 F10257.285 G1 X128.912 Y90.266 E.00827 G1 X128.645 Y90.75 E.02017 ;PATH_TASK id=500 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F11054.364 G1 X128.217 Y91.043 E.01757 G1 X127.7 Y91.1 E.01759 G1 X125.66 Y91.065 E.06908 G1 X125.646 Y91.624 E.01889 G1 X125.604 Y91.742 E.00426 G1 X125.337 Y92.055 E.01391 G1 X124.858 Y92.264 E.01772 G1 X124.559 Y92.267 E.01013 G1 X124.559 Y92.35 E.00281 G1 X123.447 Y93.461 E.05319 G1 X123.963 Y93.306 E.01822 G1 X124.611 Y93.22 E.02215 G1 X125.765 Y93.222 E.03905 G1 X126.386 Y93.296 E.02118 G1 X127.103 Y93.483 E.02509 G1 X127.651 Y93.743 E.0205 G1 X128.193 Y94.167 E.0233 G1 X128.618 Y94.758 E.02466 G1 X128.753 Y95.085 E.01197 ;PATH_TASK id=501 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.466103 G1 F10633.715 G1 X128.826 Y95.401 E.0114 ;PATH_TASK id=502 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.482206 G1 F10243.907 G1 X128.898 Y95.716 E.01183 ;PATH_TASK id=503 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X128.532 Y93.94 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F11054.364 G1 X128.532 Y91.338 E.08806 G1 X128.289 Y91.444 E.00897 G1 X127.858 Y91.51 E.01477 G1 X126.057 Y91.479 E.06097 G1 X125.991 Y91.888 E.01401 G1 X125.656 Y92.326 E.01867 ;PATH_TASK id=504 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.469456 G1 F10550.124 G1 X125.397 Y92.486 E.0108 ;PATH_TASK id=505 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.508368 G1 F9668.109 G1 X125.138 Y92.646 E.01178 ;PATH_TASK id=506 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.546369 G1 F8938.353 G1 X125.056 Y92.692 E.00392 ;PATH_TASK id=507 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.583458 G1 F8325.047 G1 X124.975 Y92.737 E.00421 ;PATH_TASK id=508 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.583002 G1 F8332.074 G1 X125.132 Y92.756 E.00712 ;PATH_TASK id=509 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.545001 G1 F8962.7 G1 X125.289 Y92.775 E.00661 ;PATH_TASK id=510 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.507001 G1 F9696.601 G1 X125.446 Y92.794 E.00611 ;PATH_TASK id=511 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.451804 G1 F11005.587 G1 X125.604 Y92.813 E.00539 G1 X126.302 Y92.874 E.02384 G1 X127.17 Y93.077 E.03029 G1 X127.782 Y93.349 E.02279 G1 X128.444 Y93.846 E.02813 G1 X128.505 Y93.911 E.00302 ;PATH_TASK id=512 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X128.125 Y93.085 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X128.125 Y91.887 E.04055 G1 X127.376 Y91.909 E.02538 G1 X126.399 Y91.892 E.03306 G1 X126.302 Y92.164 E.00977 G1 X126.095 Y92.44 E.01167 G1 X126.589 Y92.507 E.01687 G1 X127.271 Y92.682 E.02384 G1 X127.953 Y92.98 E.02519 G1 X128.091 Y93.064 E.00547 ;PATH_TASK id=513 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X127.709 Y92.308 F21000 ;WIDTH:0.52883 G1 F9260.974 G1 X127.648 Y92.308 E.00245 G1 X127.618 Y92.361 E.00245 G1 X127.648 Y92.413 E.00245 G1 X127.709 Y92.413 E.00245 G1 X127.719 Y92.395 E.00084 ;PATH_TASK id=514 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X128.912 Y90.266 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.504298 G1 F9753.391 G1 X128.926 Y89.386 E.03377 G1 X128.923 Y89.355 E.00118 ;PATH_TASK id=515 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X128.92 Y89.315 F21000 ;WIDTH:0.470052 G1 F10535.392 G1 X128.939 Y89.143 E.00614 ;PATH_TASK id=516 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.432027 G1 F11564.942 G1 X128.958 Y88.972 E.00559 ;PATH_TASK id=517 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.410675 G1 F12000 G1 X128.977 Y88.8 E.00528 G1 X128.936 Y88.211 E.01805 ;PATH_TASK id=518 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.462616 G1 F10722.059 G1 X128.93 Y88.156 E.00192 ;PATH_TASK id=519 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.445583 G1 F11175.598 G1 X128.806 Y88.375 E.00842 ;PATH_TASK id=520 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.384987 G1 F12000 G1 X128.682 Y88.594 E.00715 G1 X128.578 Y88.694 E.00411 G1 X128.703 Y88.845 E.00557 ;PATH_TASK id=521 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.394003 G1 X128.77 Y88.989 E.00465 ;PATH_TASK id=522 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.432027 G1 F11564.942 G1 X128.836 Y89.134 E.00516 ;PATH_TASK id=523 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.45104 G1 F11026.186 G1 X128.903 Y89.279 E.00541 ;PATH_TASK id=524 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X128.93 Y88.156 F21000 ;WIDTH:0.469114 G1 F10558.571 G1 X128.94 Y87.575 E.0206 ;PATH_TASK id=525 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X128.57 Y83.362 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.369016 G1 F12000 G1 X128.57 Y82.93 E.01171 G1 X128.029 Y82.92 E.01467 ;PATH_TASK id=526 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.379829 G1 X127.962 Y82.945 E.00199 ;PATH_TASK id=527 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.428715 G1 F11664.241 G1 X127.896 Y82.969 E.00228 ;PATH_TASK id=528 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.477601 G1 F10352.439 G1 X127.829 Y82.994 E.00257 ;PATH_TASK id=529 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.526486 G1 F9305.868 G1 X127.763 Y83.018 E.00285 ;PATH_TASK id=530 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.575372 G1 F8451.474 G1 X127.696 Y83.043 E.00314 ;PATH_TASK id=531 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.624258 G1 F7740.774 G1 X127.629 Y83.067 E.00343 ;PATH_TASK id=532 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X127.695 Y83.095 E.00343 ;PATH_TASK id=533 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.575372 G1 F8451.474 G1 X127.76 Y83.122 E.00314 ;PATH_TASK id=534 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.526486 G1 F9305.868 G1 X127.825 Y83.15 E.00285 ;PATH_TASK id=535 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.477601 G1 F10352.439 G1 X127.891 Y83.177 E.00257 ;PATH_TASK id=536 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.428715 G1 F11664.241 G1 X127.956 Y83.205 E.00228 ;PATH_TASK id=537 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.367253 G1 F12000 G1 X128.022 Y83.233 E.00191 G1 X128.359 Y83.255 E.00911 G1 X128.534 Y83.344 E.00531 ;PATH_TASK id=538 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X127.629 Y83.067 F21000 ;WIDTH:0.6487 G1 F7428.439 G1 X127.218 Y83.065 E.02073 ;PATH_TASK id=539 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X126.125 Y83.651 F21000 ;WIDTH:0.593096 G1 F8179.205 G1 X126.581 Y83.279 E.02691 G1 X126.858 Y83.15 E.01401 ;PATH_TASK id=540 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.618443 G1 F7818.985 G1 X127.163 Y83.066 E.01511 G1 X126.5 Y83.038 E.03174 ;PATH_TASK id=541 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.591539 G1 F8202.414 G1 X124.759 Y83.038 E.07942 G1 X124.705 Y83.093 E.0035 G1 X125.201 Y83.195 E.02309 G1 X125.954 Y83.556 E.03813 G1 X126.09 Y83.632 E.00708 ;PATH_TASK id=542 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X126.296 Y84.436 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X126.5 Y83.947 E.01796 G1 X126.952 Y83.623 E.01879 G1 X127.31 Y83.559 E.01231 G1 X128.21 Y83.602 E.03052 G1 X128.701 Y83.884 E.01916 G1 X128.873 Y84.102 E.0094 G1 X128.939 Y83.753 E.012 G1 X128.939 Y82.561 E.04038 G1 X124.478 Y82.561 E.151 G1 X124.478 Y82.643 E.0028 G1 X123.436 Y83.686 E.04992 G1 X123.669 Y83.592 E.0085 G1 X124.169 Y83.522 E.01711 G1 X124.67 Y83.573 E.01705 G1 X125.157 Y83.681 E.01689 G1 X125.807 Y84.023 E.02486 G1 X126.236 Y84.374 E.01875 G1 X126.268 Y84.408 E.00158 ;PATH_TASK id=543 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X123.023 Y83.972 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.38292 G1 F12000 G1 X122.511 Y84.452 E.01984 G1 X122.369 Y84.616 E.00613 ;PATH_TASK id=544 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X121.454 Y86.224 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.42261 G1 F11851.774 G1 X121.459 Y86.593 E.01164 ;PATH_TASK id=545 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X121.489 Y88.697 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.492768 G1 F10003.378 G1 X121.764 Y88.288 E.01843 G1 X122.003 Y88.068 E.01214 G1 X121.672 Y87.501 E.02457 ;PATH_TASK id=546 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.479686 G1 F10303.011 G1 X121.568 Y87.089 E.01542 ;PATH_TASK id=547 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.461546 G1 F10749.467 G1 X121.464 Y86.677 E.01478 G1 X121.489 Y87.35 E.02345 ;PATH_TASK id=548 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.492768 G1 F10003.378 G1 X121.489 Y88.657 E.04887 ;PATH_TASK id=549 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X121.899 Y92.673 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.498457 G1 F9878.451 G1 X122.413 Y92.158 E.02755 G1 X122.076 Y91.586 E.02518 G1 X121.899 Y91.414 E.00934 G1 X121.899 Y92.633 E.04617 ;PATH_TASK id=550 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X122.247 Y94.465 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.38292 G1 F12000 G1 X122.722 Y93.993 E.01894 ;PATH_TASK id=551 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X121.468 Y93.714 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X122.985 Y92.196 E.07265 G1 X122.697 Y91.792 E.01682 G1 X122.433 Y91.338 E.01777 G1 X122.205 Y91.102 E.01111 G1 X121.85 Y90.83 E.01511 G1 X121.607 Y90.555 E.01244 G1 X121.468 Y90.355 E.00826 G1 X121.468 Y93.674 E.11236 ;PATH_TASK id=552 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X121.061 Y94.697 F21000 G1 F11054.364 G1 X123.603 Y92.154 E.1217 G1 X123.358 Y92.01 E.00961 G1 X123.049 Y91.587 E.01775 G1 X122.763 Y91.096 E.01923 G1 X122.441 Y90.77 E.01551 G1 X122.155 Y90.561 E.01199 G1 X121.872 Y90.217 E.01506 ;PATH_TASK id=553 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.469217 G1 F10556.02 G1 X121.829 Y90.139 E.00317 ;PATH_TASK id=554 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.507653 G1 F9682.98 G1 X121.785 Y90.061 E.00345 ;PATH_TASK id=555 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.546089 G1 F8943.317 G1 X121.742 Y89.983 E.00374 ;PATH_TASK id=556 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.600396 G1 F8072.097 G1 X121.698 Y89.905 E.00414 G1 X121.695 Y89.285 E.02876 ;PATH_TASK id=557 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.578832 G1 F8396.912 G1 X121.748 Y89.152 E.0064 ;PATH_TASK id=558 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.533256 G1 F9177.38 G1 X121.802 Y89.018 E.00585 ;PATH_TASK id=559 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.487681 G1 F10117.801 G1 X121.855 Y88.885 E.00531 ;PATH_TASK id=560 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.450616 G1 F11037.639 G1 X122.143 Y88.513 E.01595 G1 X122.526 Y88.318 E.01458 G1 X122.857 Y88.296 E.01124 G1 X122.578 Y88.089 E.01179 G1 X122.307 Y87.739 E.01498 G1 X122.042 Y87.284 E.01785 G1 X121.856 Y86.579 E.02475 G1 X121.845 Y85.838 E.02511 G1 X121.946 Y85.29 E.0189 G1 X122.032 Y85.09 E.00737 G1 X121.143 Y85.978 E.04259 G1 X121.061 Y85.978 E.00281 G1 X121.061 Y88.52 E.08615 G1 X121.068 Y88.79 E.00917 ;PATH_TASK id=561 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.487682 G1 F10117.778 G1 X121.091 Y88.956 E.0062 ;PATH_TASK id=562 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.533259 G1 F9177.324 G1 X121.114 Y89.123 E.00684 ;PATH_TASK id=563 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.597595 G1 F8112.86 G1 X121.136 Y89.289 E.00774 G1 X121.137 Y89.907 E.02852 ;PATH_TASK id=564 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.584525 G1 F8308.639 G1 X121.118 Y90.082 E.00793 ;PATH_TASK id=565 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.546089 G1 F8943.317 G1 X121.099 Y90.257 E.00737 ;PATH_TASK id=566 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.507653 G1 F9682.98 G1 X121.08 Y90.433 E.00681 ;PATH_TASK id=567 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.451602 G1 F11011.029 G1 X121.061 Y90.608 E.00598 G1 X121.061 Y94.657 E.1376 ;PATH_TASK id=568 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X121.46 Y98.224 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.433717 G1 F11514.93 G1 X121.871 Y97.808 E.01902 G1 X121.958 Y97.767 E.00314 G1 X121.777 Y97.557 E.00903 G1 X121.527 Y97.115 E.01649 G1 X121.46 Y96.953 E.00571 G1 X121.46 Y98.184 E.04002 ;PATH_TASK id=569 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X121.943 Y102.831 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.585569 G1 F8292.654 G1 X122.479 Y102.514 E.02809 G1 X122.667 Y102.427 E.00936 G1 X122.297 Y102.012 E.02508 G1 X121.943 Y101.432 E.03067 G1 X121.943 Y102.791 E.06131 ;PATH_TASK id=570 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X121.468 Y104.122 F21000 ;WIDTH:0.449325 G1 F11072.699 G1 X121.609 Y103.853 E.01025 G1 X121.828 Y103.579 E.01185 G1 X122.22 Y103.215 E.0181 G1 X122.679 Y102.945 E.01799 G1 X123.009 Y102.801 E.01216 G1 X123.487 Y102.704 E.01647 ;PATH_TASK id=571 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.418658 G1 F11976.433 G1 X124.078 Y102.702 E.01846 G1 X124.626 Y102.785 E.01733 ;PATH_TASK id=572 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.455245 G1 F10913.741 G1 X124.831 Y102.817 E.00712 G1 X125.269 Y102.594 E.01683 ;PATH_TASK id=573 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.417523 G1 F12000 G1 X125.485 Y102.401 E.00903 ;PATH_TASK id=574 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.381017 G1 X125.701 Y102.208 E.00815 ;PATH_TASK id=575 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.380842 G1 X125.889 Y101.994 E.00798 ;PATH_TASK id=576 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.416996 G1 X126.076 Y101.781 E.00884 ;PATH_TASK id=577 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.468199 G1 F10581.29 G1 X126.264 Y101.568 E.01004 G1 X126.621 Y101.211 E.01785 G1 X125.907 Y101.199 E.02527 G1 X125.9 Y101.39 E.00678 ;PATH_TASK id=578 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.453743 G1 F10953.622 G1 X125.808 Y101.536 E.00588 ;PATH_TASK id=579 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.418773 G1 F11972.765 G1 X125.717 Y101.682 E.00538 ;PATH_TASK id=580 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.377715 G1 F12000 G1 X125.625 Y101.828 E.00479 G1 X125.248 Y102.164 E.01405 ;PATH_TASK id=581 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.399163 G1 X125.143 Y102.228 E.00365 ;PATH_TASK id=582 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.439934 G1 F11334.632 G1 X125.038 Y102.293 E.00407 G1 X124.654 Y102.387 E.01305 ;PATH_TASK id=583 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.432595 G1 F11548.085 G1 X124.384 Y102.371 E.00877 ;PATH_TASK id=584 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.414352 G1 F12000 G1 X124.114 Y102.355 E.00836 G1 X123.504 Y102.329 E.01886 ;PATH_TASK id=585 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449512 G1 F11067.612 G1 X123.081 Y102.143 E.0156 G1 X122.895 Y101.991 E.00813 G1 X122.606 Y101.628 E.0157 G1 X122.268 Y101.046 E.02274 G1 X122.048 Y100.817 E.01075 G1 X121.685 Y100.539 E.01545 G1 X121.468 Y100.293 E.01111 G1 X121.468 Y104.082 E.1281 ;PATH_TASK id=586 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X121.921 Y108.183 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.486378 G1 F10147.522 G1 X121.865 Y108.183 E.00204 G1 X121.838 Y108.231 E.00204 G1 X121.865 Y108.279 E.00204 G1 X121.921 Y108.279 E.00204 G1 X121.928 Y108.266 E.00057 ;PATH_TASK id=587 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X122.565 Y108.16 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X122.15 Y107.891 E.01676 G1 X121.88 Y107.642 E.01244 G1 X121.539 Y107.209 E.01865 G1 X121.468 Y107.084 E.00487 G1 X121.468 Y109.258 E.07357 G1 X122.537 Y108.188 E.05119 ;PATH_TASK id=588 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X123.305 Y107.997 F21000 ;WIDTH:0.457662 G1 F10850.134 G1 X122.834 Y107.844 E.01706 G1 X122.419 Y107.586 E.01686 G1 X122.195 Y107.385 E.01037 G1 X121.893 Y107.009 E.01664 G1 X121.744 Y106.74 E.01059 G1 X121.517 Y106.052 E.025 G1 X121.491 Y105.468 E.02016 ;PATH_TASK id=589 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.479678 G1 F10303.206 G1 X121.532 Y105.129 E.01237 ;PATH_TASK id=590 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.492952 G1 F9999.299 G1 X121.572 Y104.791 E.01275 G1 X121.91 Y104.137 E.02756 ;PATH_TASK id=591 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.450157 G1 F11050.094 G1 X122.109 Y103.874 E.01116 G1 X122.45 Y103.551 E.01592 G1 X122.851 Y103.314 E.01576 G1 X123.382 Y103.121 E.01914 G1 X123.965 Y103.069 E.01982 G1 X124.546 Y103.182 E.02004 G1 X124.84 Y103.278 E.01047 G1 X125.374 Y103.018 E.02011 G1 X125.571 Y102.981 E.00677 G1 X125.58 Y102.846 E.00459 G1 X127.613 Y100.81 E.09741 G1 X125.496 Y100.774 E.0717 G1 X125.485 Y101.34 E.01915 M73 P83 R6 G1 X125.295 Y101.657 E.01253 G1 X124.931 Y101.904 E.01492 G1 X124.618 Y101.983 E.01092 G1 X123.794 Y101.97 E.02788 G1 X123.516 Y101.911 E.00966 G1 X123.209 Y101.732 E.01203 G1 X122.958 Y101.423 E.01347 G1 X122.598 Y100.805 E.02423 G1 X122.284 Y100.485 E.01516 G1 X121.99 Y100.269 E.01235 G1 X121.702 Y99.928 E.01513 ;PATH_TASK id=592 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.475593 G1 F10400.481 G1 X121.638 Y99.771 E.0061 ;PATH_TASK id=593 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.517043 G1 F9491.21 G1 X121.574 Y99.614 E.00668 G1 X121.571 Y98.994 E.02444 ;PATH_TASK id=594 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.502263 G1 F9796.611 G1 X121.64 Y98.781 E.00855 ;PATH_TASK id=595 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.451529 G1 F11012.991 G1 X121.709 Y98.568 E.0076 G1 X122.049 Y98.174 E.01767 G1 X122.535 Y97.999 E.01755 G1 X122.851 Y97.994 E.01074 G1 X122.58 Y97.814 E.01107 G1 X122.136 Y97.38 E.02109 G1 X121.86 Y96.887 E.01919 ;PATH_TASK id=596 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.468787 G1 F10566.692 G1 X121.817 Y96.821 E.0028 ;PATH_TASK id=597 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.506362 G1 F9709.963 G1 X121.775 Y96.754 E.00305 ;PATH_TASK id=598 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.543937 G1 F8981.74 G1 X121.732 Y96.687 E.00329 ;PATH_TASK id=599 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.575833 G1 F8444.156 G1 X121.689 Y96.621 E.0035 G1 X121.614 Y96.007 E.0274 ;PATH_TASK id=600 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.548996 G1 F8891.948 G1 X121.663 Y95.366 E.02704 G1 X121.675 Y95.303 E.00271 G1 X121.285 Y95.654 E.02206 G1 X121.11 Y95.611 E.00759 ;PATH_TASK id=601 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.561619 G1 F8675.56 G1 X121.123 Y96.139 E.02275 ;PATH_TASK id=602 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.587406 G1 F8264.683 G1 X121.136 Y96.666 E.02388 ;PATH_TASK id=603 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.581512 G1 F8355.127 G1 X121.117 Y96.783 E.00529 ;PATH_TASK id=604 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.543937 G1 F8981.74 G1 X121.098 Y96.899 E.00492 ;PATH_TASK id=605 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.506362 G1 F9709.963 G1 X121.079 Y97.016 E.00455 ;PATH_TASK id=606 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.452435 G1 F10988.609 G1 X121.061 Y97.133 E.00402 G1 X121.062 Y98.485 E.04604 ;PATH_TASK id=607 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.468764 G1 F10567.262 G1 X121.078 Y98.739 E.00903 ;PATH_TASK id=608 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.514892 G1 F9534.475 G1 X121.095 Y98.994 E.01001 G1 X121.096 Y99.615 E.0244 ;PATH_TASK id=609 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.503352 G1 F9773.435 G1 X121.078 Y99.935 E.01224 ;PATH_TASK id=610 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.456353 G1 F10884.472 G1 X121.061 Y100.254 E.01099 G1 X121.061 Y103.947 E.12696 G1 X121.085 Y104.619 E.02312 G1 X121.07 Y105.384 E.02632 G1 X121.076 Y106.032 E.02225 G1 X121.061 Y106.86 E.02847 G1 X121.061 Y110.241 E.11622 G1 X123.276 Y108.025 E.10772 ;PATH_TASK id=611 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X123.385 Y107.573 Z1 F21000 G1 X127.751 Y114.042 G1 X127.776 Y114.08 G1 X127.8 Y114.117 G1 X127.823 Y114.156 G1 X127.847 Y114.2 G1 X127.871 Y114.244 G1 X127.894 Y114.289 G1 X127.916 Y114.335 G1 X127.936 Y114.381 G1 X127.956 Y114.428 G1 X127.974 Y114.475 G1 X127.991 Y114.523 G1 X128.007 Y114.571 G1 X128.021 Y114.62 G1 X128.035 Y114.668 G1 X128.047 Y114.718 G1 X128.058 Y114.767 G1 X128.068 Y114.817 G1 X128.077 Y114.867 G1 X128.085 Y114.917 G1 X128.091 Y114.968 G1 X128.097 Y115.018 G1 X128.101 Y115.069 G1 X128.104 Y115.12 G1 X128.106 Y115.171 G1 X128.107 Y115.221 G1 X128.107 Y115.252 G1 X128.107 Y115.283 G1 X128.105 Y115.334 G1 X128.103 Y115.386 G1 X128.099 Y115.437 G1 X128.095 Y115.489 G1 X128.089 Y115.54 G1 X128.083 Y115.591 G1 X128.075 Y115.641 G1 X128.066 Y115.692 G1 X128.057 Y115.742 G1 X128.046 Y115.792 G1 X128.034 Y115.841 G1 X128.02 Y115.891 G1 X128.006 Y115.939 G1 X127.991 Y115.988 G1 X127.974 Y116.036 G1 X127.957 Y116.084 G1 X127.938 Y116.131 G1 X127.918 Y116.178 G1 X127.897 Y116.224 G1 X127.875 Y116.269 G1 X127.852 Y116.315 G1 X127.827 Y116.359 G1 X127.802 Y116.403 G1 X127.776 Y116.446 G1 X127.748 Y116.489 G1 X127.72 Y116.531 G1 X127.69 Y116.573 G1 X127.66 Y116.613 G1 X127.628 Y116.653 G1 X127.596 Y116.693 G1 X127.563 Y116.731 G1 X127.529 Y116.769 G1 X127.494 Y116.806 G1 X127.458 Y116.842 G1 X127.421 Y116.878 G1 X127.383 Y116.913 G1 X127.346 Y116.946 G1 X127.324 Y116.965 G1 X127.3 Y116.985 G1 X127.265 Y117.013 G1 X127.228 Y117.042 G1 X127.19 Y117.069 G1 X127.152 Y117.096 G1 X127.134 Y117.108 G1 X129.389 Y121.36 G1 X128.939 Y121.36 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F11054.364 G1 X127.254 Y123.045 E.08069 G1 X127.486 Y123.063 E.0079 G1 X127.904 Y123.244 E.0154 G1 X128.209 Y123.607 E.01606 ;PATH_TASK id=612 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.467565 G1 F10597.086 G1 X128.264 Y123.76 E.00576 ;PATH_TASK id=613 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.502697 G1 F9787.353 G1 X128.319 Y123.914 E.00624 ;PATH_TASK id=614 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.557832 G1 F8739.357 G1 X128.374 Y124.068 E.00698 G1 X128.361 Y124.675 E.02601 G1 X128.332 Y125.006 E.01424 ;PATH_TASK id=615 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.542085 G1 F9015.07 G1 X128.271 Y125.081 E.00402 ;PATH_TASK id=616 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.498009 G1 F9888.184 G1 X128.209 Y125.156 E.00367 ;PATH_TASK id=617 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.453933 G1 F10948.558 G1 X128.148 Y125.231 E.00331 ;PATH_TASK id=618 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.409858 G1 F12000 G1 X128.086 Y125.306 E.00296 ;PATH_TASK id=619 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.372789 G1 X128.025 Y125.381 E.00266 G1 X127.625 Y125.694 E.01393 ;PATH_TASK id=620 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.42165 G1 F11881.841 G1 X127.508 Y125.732 E.00387 ;PATH_TASK id=621 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.455932 G1 F10895.58 G1 X127.391 Y125.769 E.00421 ;PATH_TASK id=622 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.506078 G1 F9715.909 G1 X127.274 Y125.806 E.00473 G1 X127.124 Y125.803 E.00581 G1 X127.11 Y126.603 E.03079 G1 X127.516 Y126.197 E.02212 ;PATH_TASK id=623 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.485146 G1 F10175.803 G1 X127.647 Y126.097 E.00604 ;PATH_TASK id=624 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.440727 G1 F11312.032 G1 X127.778 Y125.998 E.00543 ;PATH_TASK id=625 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.396308 G1 F12000 G1 X127.908 Y125.899 E.00483 ;PATH_TASK id=626 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.3593 G1 X128.288 Y125.54 E.01373 ;PATH_TASK id=627 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.366463 G1 X128.336 Y125.461 E.00251 ;PATH_TASK id=628 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.410388 G1 X128.385 Y125.381 E.00285 ;PATH_TASK id=629 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.454312 G1 F10938.485 G1 X128.433 Y125.301 E.00319 ;PATH_TASK id=630 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.498236 G1 F9883.252 G1 X128.482 Y125.222 E.00353 ;PATH_TASK id=631 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.560031 G1 F8702.198 G1 X128.53 Y125.142 E.00401 G1 X128.816 Y124.856 E.01738 G1 X128.882 Y124.856 E.00284 G1 X128.887 Y124.06 E.03424 ;PATH_TASK id=632 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.537741 G1 F9094.204 G1 X128.904 Y123.878 E.00755 ;PATH_TASK id=633 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.502644 G1 F9788.482 G1 X128.922 Y123.695 E.00701 ;PATH_TASK id=634 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.452804 G1 F10978.731 G1 X128.939 Y123.512 E.00625 G1 X128.939 Y121.4 E.072 ;PATH_TASK id=635 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X128.535 Y122.335 F21000 ;WIDTH:0.443967 G1 F11220.629 G1 X128.022 Y122.848 E.0242 G1 X128.2 Y122.968 E.00715 G1 X128.457 Y123.245 E.01259 G1 X128.535 Y123.387 E.0054 G1 X128.535 Y122.375 E.03373 ;PATH_TASK id=636 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X128.939 Y131.147 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F11054.364 G1 X127.743 Y132.343 E.05725 G1 X127.995 Y132.558 E.01121 G1 X128.168 Y133.09 E.01894 G1 X128.11 Y136.529 E.11643 G1 X128.028 Y136.893 E.0126 G1 X127.73 Y137.304 E.01721 G1 X127.641 Y137.391 E.0042 G1 X127.836 Y137.439 E.0068 G1 X128.939 Y137.439 E.03735 G1 X128.939 Y131.187 E.21165 ;PATH_TASK id=637 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X128.486 Y136.986 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.524104 G1 F9351.932 G1 X128.505 Y136.761 E.00902 ;PATH_TASK id=638 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.485104 G1 F10176.758 G1 X128.525 Y136.537 E.00829 ;PATH_TASK id=639 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.451125 G1 F11023.885 G1 X128.539 Y134.829 E.05797 ;PATH_TASK id=640 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.422166 G1 F11865.665 G1 X128.553 Y133.121 E.05386 ;PATH_TASK id=641 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.430918 G1 F11598.02 G1 X128.53 Y132.95 E.00557 ;PATH_TASK id=642 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.47738 G1 F10357.691 G1 X128.507 Y132.779 E.00624 ;PATH_TASK id=643 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.523843 G1 F9357.021 G1 X128.484 Y132.608 E.0069 ;PATH_TASK id=644 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.570305 G1 F8532.67 G1 X128.461 Y132.437 E.00757 ;PATH_TASK id=645 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.593536 G1 F8172.665 G1 X128.451 Y132.384 E.00244 ;PATH_TASK id=646 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X127.727 Y132.563 Z1 F21000 G1 X128.107 Y115.283 G1 X128.271 Y105.646 G1 X128.271 Y105.596 G1 X128.306 Y98.536 G1 X124.55 Y98.092 G1 X124.418 Y98.076 G1 X124.302 Y98.06 G1 X124.19 Y98.041 G1 X124.091 Y98.022 G1 X124.003 Y98.003 G1 X123.917 Y97.982 G1 X123.833 Y97.96 G1 X123.759 Y97.939 G1 X123.695 Y97.919 G1 X123.657 Y97.906 G1 X123.618 Y97.892 G1 X123.549 Y97.867 G1 X123.481 Y97.84 G1 X123.414 Y97.811 G1 X123.355 Y97.784 G1 X123.302 Y97.759 G1 X123.25 Y97.733 G1 X123.199 Y97.705 G1 X123.149 Y97.677 G1 X123.099 Y97.648 G1 X123.051 Y97.617 G1 X123.003 Y97.586 G1 X122.956 Y97.553 G1 X122.91 Y97.52 G1 X122.87 Y97.489 G1 X122.834 Y97.46 G1 X122.798 Y97.43 G1 X122.764 Y97.4 G1 X122.73 Y97.369 G1 X122.697 Y97.337 G1 X122.664 Y97.305 G1 X122.632 Y97.272 G1 X122.601 Y97.238 G1 X122.571 Y97.204 G1 X122.545 Y97.172 G1 X122.518 Y97.139 G1 X122.493 Y97.106 G1 X122.469 Y97.074 G1 X122.446 Y97.042 G1 X122.424 Y97.009 G1 X122.403 Y96.975 G1 X122.382 Y96.941 G1 X122.362 Y96.907 G1 X122.343 Y96.872 G1 X122.325 Y96.836 G1 X122.307 Y96.801 G1 X122.29 Y96.765 G1 X122.274 Y96.728 G1 X122.259 Y96.692 G1 X122.244 Y96.655 G1 X122.23 Y96.617 G1 X122.217 Y96.58 G1 X122.205 Y96.542 G1 X122.193 Y96.504 G1 X122.183 Y96.465 G1 X122.173 Y96.427 G1 X122.163 Y96.388 G1 X122.155 Y96.349 G1 X122.147 Y96.31 G1 X122.14 Y96.27 G1 X122.134 Y96.231 G1 X122.128 Y96.191 G1 X122.124 Y96.151 G1 X122.119 Y96.111 G1 X122.116 Y96.071 G1 X122.113 Y96.031 G1 X122.111 Y95.99 G1 X122.11 Y95.95 G1 X122.109 Y95.91 G1 X122.109 Y95.874 G1 X122.109 Y95.837 G1 X122.111 Y95.777 G1 X122.114 Y95.721 G1 X122.118 Y95.67 G1 X122.123 Y95.621 G1 X122.128 Y95.571 G1 X122.135 Y95.522 G1 X122.143 Y95.472 G1 X122.153 Y95.424 G1 X122.163 Y95.375 G1 X122.174 Y95.327 G1 X122.187 Y95.279 G1 X122.2 Y95.231 G1 X122.215 Y95.184 G1 X122.229 Y95.142 G1 X122.243 Y95.104 G1 X122.258 Y95.067 G1 X122.273 Y95.03 G1 X122.289 Y94.993 G1 X122.306 Y94.957 G1 X122.324 Y94.921 G1 X122.341 Y94.887 G1 X122.358 Y94.857 G1 X122.384 Y94.81 G1 X122.406 Y94.773 G1 X122.427 Y94.74 G1 X122.448 Y94.708 G1 X122.47 Y94.676 G1 X122.492 Y94.645 G1 X122.516 Y94.614 G1 X122.539 Y94.583 G1 X122.564 Y94.553 G1 X122.589 Y94.524 G1 X122.614 Y94.495 G1 X122.641 Y94.466 G1 X122.667 Y94.438 G1 X122.695 Y94.411 G1 X122.723 Y94.384 G1 X122.751 Y94.358 G1 X122.78 Y94.332 G1 X122.809 Y94.307 G1 X122.839 Y94.282 G1 X122.87 Y94.258 G1 X122.901 Y94.235 G1 X122.932 Y94.212 G1 X122.964 Y94.19 G1 X122.996 Y94.168 G1 X123.023 Y94.151 G1 X123.049 Y94.134 G1 X123.095 Y94.106 G1 X123.144 Y94.077 G1 X123.194 Y94.05 G1 X123.245 Y94.023 G1 X123.297 Y93.998 G1 X123.349 Y93.973 G1 X123.402 Y93.949 G1 X123.456 Y93.927 G1 X123.51 Y93.905 G1 X123.565 Y93.884 G1 X123.621 Y93.864 G1 X123.678 Y93.845 G1 X123.735 Y93.827 G1 X123.793 Y93.81 G1 X123.852 Y93.793 G1 X123.91 Y93.778 G1 X123.945 Y93.769 G1 X123.981 Y93.76 G1 X124.046 Y93.745 G1 X124.116 Y93.731 G1 X124.188 Y93.718 G1 X124.261 Y93.707 G1 X124.335 Y93.696 G1 X124.411 Y93.687 G1 X124.489 Y93.679 G1 X124.569 Y93.672 G1 X124.65 Y93.666 G1 X124.698 Y93.663 G1 X124.548 Y91.825 G1 X124.544 Y92.077 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.450008 G1 F11054.12 G1 X121.078 Y95.542 E.16591 ;PATH_TASK id=647 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X120.611 Y95.542 Z1 F21000 G1 X122.23 Y88.722 G1 X125.046 Y88.769 G1 X125.2 Y88.772 G1 X125.208 Y88.299 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.495818 G1 F9936.011 G1 X126.163 Y88.316 E.03596 G1 X125.738 Y87.918 E.0219 G1 X125.418 Y87.555 E.01826 G1 X125.33 Y88.099 E.02076 G1 X125.229 Y88.265 E.00732 ;PATH_TASK id=648 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X124.863 Y88.221 Z1 F21000 G1 X124.838 Y88.437 G1 X124.164 Y88.356 G1 X124.091 Y88.345 G1 X124.025 Y88.334 G1 X123.967 Y88.323 G1 X123.909 Y88.31 G1 X123.852 Y88.297 G1 X123.795 Y88.282 G1 X123.739 Y88.266 G1 X123.684 Y88.248 G1 X123.629 Y88.23 G1 X123.581 Y88.212 G1 X123.537 Y88.194 G1 X123.494 Y88.176 G1 X123.451 Y88.157 G1 X123.409 Y88.137 G1 X123.367 Y88.117 G1 X123.326 Y88.095 G1 X123.285 Y88.072 G1 X123.245 Y88.049 G1 X123.206 Y88.024 G1 X123.167 Y87.999 G1 X123.128 Y87.973 G1 X123.091 Y87.946 G1 X123.054 Y87.917 G1 X123.018 Y87.889 G1 X122.982 Y87.859 G1 X122.947 Y87.828 G1 X122.913 Y87.796 G1 X122.88 Y87.764 G1 X122.848 Y87.731 G1 X122.817 Y87.697 G1 X122.793 Y87.671 G1 X122.771 Y87.645 G1 X122.744 Y87.612 G1 X122.716 Y87.577 G1 X122.689 Y87.541 G1 X122.662 Y87.504 G1 X122.637 Y87.467 G1 X122.612 Y87.43 G1 X122.589 Y87.391 G1 X122.566 Y87.352 G1 X122.544 Y87.313 G1 X122.523 Y87.273 G1 X122.503 Y87.233 G1 X122.483 Y87.192 G1 X122.465 Y87.151 G1 X122.447 Y87.109 G1 X122.431 Y87.067 G1 X122.415 Y87.024 G1 X122.4 Y86.982 G1 X122.386 Y86.939 G1 X122.373 Y86.895 G1 X122.361 Y86.851 G1 X122.35 Y86.807 G1 X122.339 Y86.763 G1 X122.329 Y86.718 G1 X122.321 Y86.673 G1 X122.312 Y86.628 G1 X122.305 Y86.582 G1 X122.299 Y86.537 G1 X122.293 Y86.491 G1 X122.288 Y86.445 G1 X122.284 Y86.398 G1 X122.281 Y86.351 G1 X122.278 Y86.304 G1 X122.276 Y86.257 G1 X122.275 Y86.21 G1 X122.275 Y86.163 G1 X122.275 Y86.131 G1 X122.275 Y86.097 G1 X122.277 Y86.023 G1 X122.281 Y85.954 G1 X122.286 Y85.892 G1 X122.291 Y85.832 G1 X122.299 Y85.771 G1 X122.307 Y85.711 G1 X122.317 Y85.651 G1 X122.328 Y85.592 G1 X122.341 Y85.534 G1 X122.354 Y85.481 G1 X122.366 Y85.434 G1 X122.379 Y85.388 G1 X122.394 Y85.342 G1 X122.409 Y85.296 G1 X122.425 Y85.251 G1 X122.442 Y85.206 G1 X122.461 Y85.162 G1 X122.48 Y85.118 G1 X122.5 Y85.074 G1 X122.521 Y85.031 G1 X122.544 Y84.989 G1 X122.567 Y84.947 G1 X122.591 Y84.906 G1 X122.617 Y84.865 G1 X122.643 Y84.825 G1 X122.67 Y84.786 G1 X122.699 Y84.747 G1 X122.728 Y84.709 G1 X122.758 Y84.672 G1 X122.789 Y84.635 G1 X122.82 Y84.6 G1 X122.845 Y84.574 G1 X122.869 Y84.549 G1 X122.9 Y84.519 G1 X122.931 Y84.489 G1 X122.963 Y84.459 G1 X122.995 Y84.431 G1 X123.028 Y84.403 G1 X123.062 Y84.376 G1 X123.096 Y84.349 G1 X123.131 Y84.324 G1 X123.166 Y84.299 G1 X123.202 Y84.275 G1 X123.238 Y84.252 G1 X123.275 Y84.229 G1 X123.312 Y84.208 G1 X123.35 Y84.187 G1 X123.389 Y84.167 G1 X123.427 Y84.148 G1 X123.467 Y84.13 G1 X123.506 Y84.113 G1 X123.546 Y84.097 G1 X123.586 Y84.082 G1 X123.627 Y84.067 G1 X123.668 Y84.054 G1 X123.709 Y84.041 G1 X123.751 Y84.03 G1 X123.793 Y84.019 G1 X123.835 Y84.01 G1 X123.877 Y84.001 G1 X123.92 Y83.993 G1 X123.962 Y83.986 G1 X124.005 Y83.981 G1 X124.048 Y83.976 G1 X124.091 Y83.971 G1 X124.134 Y83.968 G1 X124.178 Y83.966 G1 X124.221 Y83.965 G1 X124.263 Y83.964 G1 X124.288 Y83.964 G1 X124.312 Y83.964 G1 X124.358 Y83.966 G1 X124.406 Y83.968 G1 X124.454 Y83.972 G1 X124.502 Y83.976 G1 X124.549 Y83.982 G1 X124.597 Y83.989 G1 X124.644 Y83.997 G1 X124.676 Y84.003 G1 X124.464 Y82.111 G1 X124.464 Y82.37 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.450001 G1 F11054.31 G1 X121 Y85.834 E.16584 G1 X121 Y85.259 E.01949 G1 X123.759 Y82.5 E.13208 G1 X123.183 Y82.5 E.01949 G1 X121 Y84.683 E.10452 G1 X121 Y84.107 E.01949 G1 X122.607 Y82.5 E.07696 G1 X122.032 Y82.5 E.01949 G1 X120.816 Y83.715 E.05817 ;PATH_TASK id=649 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X121.101 Y82.527 F21000 ;WIDTH:0.477226 G1 F10361.358 G1 X121.047 Y82.527 E.00196 G1 X121.02 Y82.574 E.00196 G1 X121.047 Y82.621 E.00196 G1 X121.101 Y82.621 E.00196 G1 X121.109 Y82.609 E.00052 ;PATH_TASK id=650 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X120.611 Y82.609 Z1 F21000 G1 X121.949 Y105.767 G1 X121.952 Y105.811 G1 X121.956 Y105.854 G1 X121.961 Y105.898 G1 X121.966 Y105.941 G1 X121.973 Y105.984 G1 X121.98 Y106.027 G1 X121.987 Y106.069 G1 X121.996 Y106.112 G1 X122.006 Y106.154 G1 X122.016 Y106.196 G1 X122.027 Y106.237 G1 X124.313 Y114.063 G1 X124.321 Y114.046 G1 X124.338 Y114.01 G1 X124.355 Y113.974 G1 X124.373 Y113.939 G1 X124.392 Y113.903 G1 X124.42 Y113.851 G1 X124.44 Y113.815 G1 X124.463 Y113.778 G1 X124.486 Y113.741 G1 X124.51 Y113.704 G1 X124.535 Y113.667 G1 X124.561 Y113.631 G1 X124.588 Y113.595 G1 X124.616 Y113.56 G1 X124.645 Y113.524 G1 X124.675 Y113.489 G1 X124.705 Y113.455 G1 X124.737 Y113.421 G1 X124.77 Y113.387 G1 X124.804 Y113.353 G1 X124.839 Y113.321 G1 X124.875 Y113.288 G1 X124.912 Y113.256 G1 X124.949 Y113.225 G1 X124.988 Y113.194 G1 X125.009 Y113.182 G1 X125.031 Y113.174 G1 X125.077 Y113.161 G1 X125.122 Y113.148 G1 X125.168 Y113.136 G1 X125.214 Y113.126 G1 X125.26 Y113.116 G1 X125.307 Y113.107 G1 X125.354 Y113.099 G1 X125.401 Y113.092 G1 X125.448 Y113.085 G1 X125.496 Y113.08 G1 X125.544 Y113.076 G1 X125.592 Y113.072 G1 X125.64 Y113.069 G1 X125.688 Y113.067 G1 X125.737 Y113.066 G1 X125.78 Y113.066 G1 X125.826 Y113.067 G1 X125.889 Y113.068 G1 X125.953 Y113.072 G1 X126.016 Y113.077 G1 X126.08 Y113.083 G1 X126.143 Y113.091 G1 X126.206 Y113.1 G1 X126.268 Y113.111 G1 X126.324 Y113.122 G1 X126.375 Y113.134 G1 X126.424 Y113.146 G1 X126.474 Y113.159 G1 X126.523 Y113.173 G1 X126.572 Y113.188 G1 X126.621 Y113.205 G1 X126.669 Y113.222 G1 X126.717 Y113.24 G1 X126.765 Y113.259 G1 X126.812 Y113.279 G1 X126.859 Y113.301 G1 X126.904 Y113.322 G1 X126.938 Y113.339 G1 X126.972 Y113.356 G1 X127.02 Y113.382 G1 X127.069 Y113.41 G1 X127.118 Y113.439 G1 X127.165 Y113.469 G1 X127.207 Y113.498 G1 X127.245 Y113.524 G1 X127.282 Y113.551 G1 X127.318 Y113.579 G1 X127.354 Y113.607 G1 X127.389 Y113.636 G1 X127.423 Y113.666 G1 X127.456 Y113.697 G1 X127.489 Y113.728 G1 X127.521 Y113.76 G1 X127.553 Y113.793 G1 X127.584 Y113.827 G1 X127.613 Y113.861 G1 X127.643 Y113.896 G1 X127.671 Y113.931 G1 X127.698 Y113.968 G1 X127.725 Y114.004 G1 X127.751 Y114.042 G1 X127.776 Y114.08 G1 X127.8 Y114.117 G1 X127.823 Y114.156 G1 X127.847 Y114.2 G1 X127.871 Y114.244 G1 X127.894 Y114.289 G1 X127.916 Y114.335 G1 X127.936 Y114.381 G1 X127.956 Y114.428 G1 X127.974 Y114.475 G1 X127.991 Y114.523 G1 X128.007 Y114.571 G1 X128.021 Y114.62 G1 X128.035 Y114.668 G1 X128.047 Y114.718 G1 X128.058 Y114.767 G1 X128.068 Y114.817 G1 X128.077 Y114.867 G1 X128.085 Y114.917 G1 X128.091 Y114.968 G1 X128.097 Y115.018 G1 X128.101 Y115.069 G1 X128.104 Y115.12 G1 X128.106 Y115.171 G1 X128.107 Y115.221 G1 X128.107 Y115.252 G1 X128.107 Y115.283 G1 X128.105 Y115.334 G1 X128.103 Y115.386 G1 X128.099 Y115.437 G1 X128.095 Y115.489 G1 X128.089 Y115.54 G1 X128.083 Y115.591 G1 X128.075 Y115.641 G1 X128.066 Y115.692 G1 X128.057 Y115.742 G1 X128.046 Y115.792 G1 X128.034 Y115.841 G1 X128.02 Y115.891 G1 X128.006 Y115.939 G1 X127.991 Y115.988 G1 X127.974 Y116.036 G1 X127.957 Y116.084 G1 X127.938 Y116.131 G1 X127.918 Y116.178 G1 X124.923 Y122.776 G1 X125.141 Y125.073 G1 X125.327 Y125.648 G1 X125.19 Y125.686 G1 X125.204 Y125.733 G1 Z.4 F720 G1 E.7 F1500 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.537622 G1 F9096.384 G1 X124.09 Y124.931 E.05645 G1 X125.217 Y124.95 E.04637 G1 X125.204 Y125.693 E.03055 ;PATH_TASK id=651 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X125.202 Y125.683 Z1 F21000 G1 X125.217 Y125.233 G1 X125.286 Y122.783 G1 X125.432 Y117.572 G1 X125.39 Y115.493 G1 X125.493 Y115.414 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.560827 G1 F8688.818 G1 X125.439 Y115.346 E.00373 G1 X125.456 Y115.162 E.00799 G1 X125.621 Y115.043 E.00876 G1 X126.028 Y115.05 E.01751 ;PATH_TASK id=652 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.557511 G1 F8744.81 G1 X126.213 Y115.146 E.00895 G1 X126.266 Y115.271 E.00577 ;PATH_TASK id=653 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X126.235 Y115.368 E.00438 G1 X126.086 Y115.492 E.00827 ;PATH_TASK id=654 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.563988 G1 F8636.109 G1 X125.798 Y115.545 E.01267 G1 X125.564 Y115.502 E.01033 ;PATH_TASK id=651 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.560827 G1 F8688.818 G1 X125.518 Y115.445 E.00316 ;PATH_TASK id=655 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T3000 G1 X125.427 Y115.535 F21000 G1 X125.392 Y115.495 G1 X125.392 Y115.495 G1 X125.092 Y115.733 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X124.963 Y115.477 E.00973 G1 X124.943 Y115.181 E.01006 G1 X125.026 Y114.919 E.00931 G1 X125.213 Y114.705 E.00963 G1 X125.479 Y114.573 E.01002 G1 X125.697 Y114.545 E.00745 G1 X126.216 Y114.588 E.01764 G1 X126.495 Y114.733 E.01063 G1 X126.686 Y114.957 E.00996 G1 X126.76 Y115.203 E.0087 G1 X126.725 Y115.481 E.00948 G1 X126.585 Y115.727 E.00959 G1 X126.357 Y115.909 E.00988 G1 X126.009 Y116.027 E.01242 G1 X125.624 Y116.033 E.01303 G1 X125.318 Y115.931 E.01093 G1 X125.123 Y115.76 E.00879 ;PATH_TASK id=656 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1 F720 G1 X124.492 Y116.092 Z1 F21000 G1 X124.228 Y115.846 G1 X124.196 Y115.817 G1 X124.165 Y115.786 G1 X124.135 Y115.754 G1 X124.105 Y115.721 G1 X124.075 Y115.688 G1 X124.047 Y115.654 G1 X124.022 Y115.622 G1 X123.999 Y115.592 G1 X123.978 Y115.562 G1 X123.956 Y115.531 G1 X123.936 Y115.5 G1 X123.916 Y115.468 G1 X123.896 Y115.435 G1 X123.877 Y115.402 G1 X123.858 Y115.368 G1 X123.841 Y115.333 G1 X123.823 Y115.298 G1 X123.815 Y115.28 G1 X123.817 Y115.261 G1 X125.792 Y107.842 G1 X125.918 Y105.261 G1 X126 Y105.383 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.589092 G1 F8239.163 G1 X126.105 Y105.32 E.00557 G1 X126.275 Y105.344 E.00779 G1 X126.396 Y105.459 E.00758 G1 X126.416 Y105.613 E.00706 ;PATH_TASK id=657 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X126.358 Y105.802 E.00898 ;PATH_TASK id=658 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.58864 G1 F8245.987 G1 X126.172 Y105.888 E.00929 G1 X125.955 Y105.837 E.01012 G1 X125.866 Y105.676 E.00836 ;PATH_TASK id=656 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.589092 G1 F8239.163 G1 X125.916 Y105.434 E.01123 G1 X125.966 Y105.404 E.00264 ;PATH_TASK id=659 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T3000 G1 X125.869 Y105.3 F21000 G1 X125.928 Y105.254 G1 X125.928 Y105.254 G1 X125.726 Y104.93 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X126.003 Y104.826 E.01002 G1 X126.458 Y104.87 E.01548 G1 X126.69 Y105.017 E.00928 G1 X126.857 Y105.248 E.00967 G1 X126.89 Y105.388 E.00485 G1 X126.89 Y105.859 E.01595 G1 X126.753 Y106.123 E.01007 G1 X126.538 Y106.298 E.00938 G1 X126.225 Y106.392 E.01105 G1 X125.895 Y106.365 E.01121 G1 X125.641 Y106.236 E.00966 G1 X125.451 Y106.014 E.0099 G1 X125.364 Y105.741 E.00969 G1 X125.381 Y105.41 E.01123 G1 X125.503 Y105.139 E.01007 G1 X125.697 Y104.957 E.00898 ;PATH_TASK id=660 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1 F720 G1 X125.914 Y105.264 Z1 F21000 G1 X124.017 Y105.529 G1 X124.001 Y105.53 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.361615 G1 F10200 G1 X123.949 Y105.415 E.00335 G1 X123.835 Y105.375 E.00322 G1 X123.702 Y105.474 E.0044 G1 X123.694 Y105.666 E.00508 ;PATH_TASK id=661 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.359084 G1 X123.787 Y105.76 E.0035 G1 X123.929 Y105.746 E.00375 G1 X124.003 Y105.637 E.00347 ;PATH_TASK id=662 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.361615 G1 X124.001 Y105.53 E.00283 ;PATH_TASK id=663 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T3000 G1 X124.017 Y105.529 F21000 G1 X123.931 Y105.383 G1 X123.93 Y105.382 G1 X124.102 Y105.043 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X124.284 Y105.193 E.008 G1 X124.337 Y105.309 E.00429 G1 X124.387 Y105.71 E.01369 G1 X124.301 Y105.923 E.00776 G1 X124.126 Y106.086 E.0081 G1 X123.901 Y106.156 E.00798 G1 X123.662 Y106.133 E.00815 G1 X123.46 Y106.008 E.00804 G1 X123.326 Y105.803 E.00827 G1 X123.289 Y105.536 E.00914 G1 X123.352 Y105.294 E.00847 G1 X123.513 Y105.102 E.00847 G1 X123.799 Y104.991 E.01039 G1 X124.063 Y105.036 E.00907 ;PATH_TASK id=664 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1 F720 G1 X123.923 Y105.379 Z1 F21000 G1 X124.046 Y103.525 G1 X122.042 Y99.804 G1 X122.065 Y98.43 G1 X123.986 Y97.999 G1 X123.845 Y95.941 G1 X123.964 Y95.911 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.574242 G1 F8469.441 G1 X123.992 Y95.812 E.00455 G1 X124.251 Y95.689 E.01265 G1 X124.688 Y95.627 E.01953 ;PATH_TASK id=665 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.585164 G1 F8298.847 G1 X125.155 Y95.625 E.02105 G1 X126.051 Y95.655 E.04039 ;PATH_TASK id=666 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.548945 G1 F8892.841 G1 X126.442 Y95.755 E.01702 G1 X126.599 Y95.932 E.00992 ;PATH_TASK id=667 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X126.454 Y96.059 E.00812 G1 X126.083 Y96.152 E.01611 ;PATH_TASK id=668 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.58437 G1 F8311.017 G1 X125.612 Y96.17 E.02121 G1 X124.776 Y96.148 E.03767 ;PATH_TASK id=664 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.574242 G1 F8469.441 G1 X124.256 Y96.065 E.02326 G1 X123.999 Y95.93 E.01281 ;PATH_TASK id=669 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T3000 G1 X123.912 Y96.035 F21000 G1 X123.864 Y95.984 G1 X123.864 Y95.984 G1 X123.549 Y96.199 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X123.464 Y95.978 E.008 G1 X123.479 Y95.717 E.00887 G1 X123.593 Y95.504 E.00817 G1 X123.832 Y95.309 E.01043 G1 X124.1 Y95.223 E.00953 G1 X124.634 Y95.139 E.0183 G1 X125.159 Y95.129 E.01778 G1 X126.108 Y95.18 E.03216 G1 X126.643 Y95.314 E.01867 G1 X126.894 Y95.482 E.01025 G1 X127.052 Y95.706 E.00927 G1 X127.091 Y95.936 E.00788 G1 X127.033 Y96.165 E.008 G1 X126.855 Y96.383 E.0095 G1 X126.67 Y96.486 E.00718 G1 X126.125 Y96.632 E.01911 G1 X125.61 Y96.665 E.01746 G1 X124.742 Y96.637 E.02939 G1 X124.235 Y96.559 E.01738 G1 X123.737 Y96.38 E.01791 G1 X123.578 Y96.227 E.00749 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 M106 S242 ;LAYER_CHANGE ;Z:0.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;0.6 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;0.6 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=670 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T7000 M486 S0 G1 Z1.2 F720 G1 X123.872 Y95.995 Z1.2 F21000 G1 X123.633 Y97.898 G1 X122.065 Y98.43 G1 X121.944 Y105.558 G1 X121.944 Y105.591 G1 X121.944 Y105.635 G1 X121.945 Y105.679 G1 X121.947 Y105.723 G1 X121.949 Y105.767 G1 X121.952 Y105.811 G1 X121.956 Y105.854 G1 X121.961 Y105.898 G1 X121.966 Y105.941 G1 X121.973 Y105.984 G1 X121.98 Y106.027 G1 X121.987 Y106.069 G1 X121.996 Y106.112 G1 X122.006 Y106.154 G1 X122.016 Y106.196 G1 X122.027 Y106.237 G1 X122.039 Y106.279 G1 X122.052 Y106.32 G1 X122.066 Y106.361 G1 X122.08 Y106.401 G1 X122.096 Y106.441 G1 X122.112 Y106.481 G1 X122.129 Y106.52 G1 X122.147 Y106.559 G1 X122.166 Y106.598 G1 X122.186 Y106.636 G1 X122.207 Y106.673 G1 X122.228 Y106.711 G1 X122.251 Y106.747 G1 X122.274 Y106.783 G1 X122.298 Y106.819 G1 X122.323 Y106.854 G1 X122.348 Y106.888 G1 X122.375 Y106.922 G1 X122.402 Y106.956 G1 X122.43 Y106.988 G1 X122.457 Y107.019 G1 X122.478 Y107.042 G1 X122.491 Y107.055 G1 X122.519 Y107.083 G1 X122.548 Y107.112 G1 X122.578 Y107.14 G1 X122.608 Y107.168 G1 X122.64 Y107.195 G1 X122.671 Y107.221 G1 X122.703 Y107.246 G1 X122.736 Y107.271 G1 X122.769 Y107.295 G1 X122.803 Y107.318 G1 X122.837 Y107.341 G1 X124.175 Y114.412 G1 X123.94 Y114.937 G1 X123.924 Y114.972 G1 X123.909 Y115.008 G1 X123.893 Y115.045 G1 X123.878 Y115.083 G1 X123.864 Y115.121 G1 X123.852 Y115.153 G1 X123.84 Y115.186 G1 X123.828 Y115.223 G1 X123.817 Y115.261 G1 X123.815 Y115.27 G1 X123.823 Y115.298 G1 X123.826 Y115.306 G1 X123.844 Y115.341 G1 X123.881 Y115.41 G1 X123.9 Y115.443 G1 X123.919 Y115.475 G1 X123.94 Y115.507 G1 X123.96 Y115.538 G1 X123.982 Y115.569 G1 X124.004 Y115.599 G1 X124.026 Y115.628 G1 X124.081 Y115.695 G1 X124.11 Y115.728 G1 X124.14 Y115.761 G1 X124.171 Y115.792 G1 X124.202 Y115.822 G1 X124.232 Y115.85 G1 X124.254 Y115.87 G1 X124.276 Y115.89 G1 X124.299 Y115.909 G1 X124.322 Y115.927 G1 X124.335 Y115.937 G1 X124.23 Y116.074 G1 Z.6 F720 G1 E.7 F1500 G1 F10200 G1 X123.744 Y115.942 E.01704 G1 X123.422 Y115.744 E.01279 G1 X123.181 Y115.46 E.01262 G1 X123.125 Y115.195 E.00917 G1 X123.175 Y114.936 E.00895 G1 X123.321 Y114.736 E.00838 G1 X123.505 Y114.639 E.00705 ;PATH_TASK id=671 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.494839 G1 F9957.536 G1 X123.796 Y114.58 E.01115 ;PATH_TASK id=672 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.537318 G1 F9101.988 G1 X123.887 Y114.542 E.00404 ;PATH_TASK id=673 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.579796 G1 F8381.823 G1 X123.978 Y114.505 E.00439 ;PATH_TASK id=674 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X123.976 Y114.533 E.00125 ;PATH_TASK id=675 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.570654 G1 F8527.024 G1 X123.967 Y114.701 E.00741 ;PATH_TASK id=676 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.530436 G1 F9230.473 G1 X123.958 Y114.87 E.00685 ;PATH_TASK id=677 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.490218 G1 F10060.422 G1 X123.949 Y115.039 E.00628 ;PATH_TASK id=670 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X123.994 Y115.551 E.01742 G1 X124.213 Y116.038 E.01806 ;PATH_TASK id=678 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X124.31 Y115.917 Z1.2 F21000 G1 X123.372 Y115.153 G1 X123.87 Y114.47 G1 X123.972 Y113.351 G1 X123.664 Y113.202 G1 X123.72 Y113.087 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall G1 F10200 G1 X123.559 Y113.086 E.00543 G1 X122.871 Y113.28 E.0242 G1 X122.361 Y113.627 E.02088 G1 X121.982 Y114.127 E.02123 G1 X121.782 Y114.713 E.02096 G1 X121.75 Y115.371 E.02231 G1 X121.9 Y116.029 E.02284 G1 X122.23 Y116.592 E.02207 G1 X122.702 Y117.026 E.0217 G1 X123.266 Y117.323 E.02158 G1 X123.913 Y117.509 E.02277 G1 X124.48 Y117.59 E.01942 G1 X125.164 Y117.62 E.02317 G1 X125.754 Y117.59 E.02 G1 X126.398 Y117.474 E.02214 G1 X127.049 Y117.205 E.02385 G1 X127.552 Y116.799 E.02187 G1 X127.927 Y116.247 E.02258 G1 X128.118 Y115.616 E.02232 G1 X128.124 Y114.923 E.02347 G1 X127.933 Y114.284 E.02258 G1 X127.577 Y113.764 E.02132 G1 X127.069 Y113.365 E.02187 G1 X126.46 Y113.115 E.0223 G1 X125.965 Y113.033 E.01697 G1 X125.596 Y113.05 E.01251 G1 X125.093 Y113.112 E.01715 G1 X124.583 Y113.331 E.01878 G1 X124.286 Y113.555 E.01259 G1 X124.243 Y113.399 E.00547 G1 X124.131 Y113.247 E.00639 G1 X123.849 Y113.088 E.01096 G1 X123.76 Y113.087 E.00301 ;PATH_TASK id=679 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T3000 G1 X123.697 Y113.217 F21000 G1 X123.81 Y113.272 G1 X123.7 Y113.498 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X123.146 Y113.625 E.01923 G1 X122.733 Y113.866 E.01617 G1 X122.412 Y114.232 E.01649 G1 X122.209 Y114.746 E.01873 G1 X122.172 Y115.294 E.01856 G1 X122.279 Y115.829 E.01847 G1 X122.531 Y116.287 E.01771 G1 X122.909 Y116.651 E.01777 G1 X123.389 Y116.912 E.01847 ;PATH_TASK id=680 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X123.947 Y117.079 E.01971 G1 X124.541 Y117.165 E.02033 G1 X125.131 Y117.192 E.01998 G1 X125.659 Y117.17 E.01791 G1 X126.248 Y117.072 E.02021 G1 X126.794 Y116.861 E.01978 G1 X127.209 Y116.543 E.0177 G1 X127.522 Y116.108 E.01815 G1 X127.687 Y115.62 E.01744 G1 X127.713 Y115.072 E.01859 G1 X127.591 Y114.561 E.01778 G1 X127.3 Y114.091 E.01871 G1 X126.894 Y113.756 E.01781 G1 X126.39 Y113.537 E.01859 G1 X125.879 Y113.454 E.01753 G1 X125.228 Y113.519 E.02213 G1 X124.755 Y113.723 E.01744 G1 X124.342 Y114.077 E.01842 ;PATH_TASK id=681 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.494064 G1 F9974.656 G1 X124.228 Y114.202 E.00633 ;PATH_TASK id=682 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.538128 G1 F9087.097 G1 X124.115 Y114.327 E.00695 ;PATH_TASK id=683 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.582192 G1 F8344.583 G1 X124.002 Y114.452 E.00757 G1 X123.969 Y114.307 E.00663 ;PATH_TASK id=684 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.538128 G1 F9087.097 G1 X123.936 Y114.163 E.00609 ;PATH_TASK id=685 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.494064 G1 F9974.656 G1 X123.904 Y114.019 E.00555 ;PATH_TASK id=679 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X123.883 Y113.669 E.01186 G1 X123.829 Y113.551 E.00439 G1 X123.737 Y113.513 E.00337 ;PATH_TASK id=686 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X123.952 Y113.536 Z1.2 F21000 G1 X123.87 Y114.47 G1 X123.38 Y115.191 G1 X123.38 Y115.195 G1 X123.546 Y115.191 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.418884 G1 F10200 G1 X123.56 Y115.287 E.00303 ;PATH_TASK id=687 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X123.386 Y115.305 Z1.2 F21000 G1 X123.87 Y114.47 G1 X123.972 Y113.351 G1 X123.866 Y113.299 G1 X124.86 Y107.434 G1 X124.777 Y107.394 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F10200 G1 X125.072 Y107.63 E.01278 G1 X125.628 Y107.851 E.02025 G1 X126.289 Y107.897 E.02244 G1 X126.922 Y107.763 E.02188 G1 X127.481 Y107.442 E.02183 G1 X127.914 Y106.975 E.02153 G1 X128.194 Y106.393 E.02189 G1 X128.309 Y105.749 E.02214 G1 X128.287 Y105.223 E.01782 G1 X128.112 Y104.592 E.02215 G1 X127.778 Y104.058 E.02132 G1 X127.295 Y103.637 E.02167 G1 X127.11 Y103.535 E.00718 G1 X126.542 Y103.344 E.02026 G1 X126.053 Y103.314 E.0166 G1 X125.509 Y103.402 E.01864 G1 X125.053 Y103.623 E.01715 G1 X124.842 Y103.792 E.00914 G1 X124.784 Y103.752 E.0024 G1 X124.46 Y103.58 E.01242 G1 X123.96 Y103.476 E.01728 G1 X123.455 Y103.521 E.01715 G1 X123.261 Y103.572 E.00678 G1 X122.737 Y103.843 E.02 G1 X122.284 Y104.306 E.02191 G1 X122.008 Y104.871 E.02127 G1 X121.905 Y105.456 E.02012 G1 X121.943 Y106.067 E.0207 G1 X122.127 Y106.602 E.01916 G1 X122.485 Y107.104 E.02087 G1 X122.981 Y107.465 E.02075 G1 X123.586 Y107.648 E.02139 G1 X123.792 Y107.662 E.00699 G1 X124.355 Y107.597 E.0192 G1 X124.741 Y107.412 E.01449 ;PATH_TASK id=688 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T3000 G1 X124.681 Y107.413 F21000 G1 X124.681 Y107.413 G1 X124.645 Y106.751 G1 X124.779 Y106.686 G1 X124.821 Y106.772 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X124.872 Y106.876 E.00392 G1 X125.198 Y107.205 E.01568 G1 X125.677 Y107.425 E.01784 G1 X126.22 Y107.475 E.01845 G1 X126.724 Y107.382 E.01736 G1 X127.18 Y107.137 E.0175 G1 X127.535 Y106.774 E.01722 G1 X127.774 Y106.31 E.01765 G1 X127.877 Y105.784 E.01815 G1 X127.859 Y105.241 E.01839 G1 X127.703 Y104.719 E.01843 G1 X127.425 Y104.301 E.017 G1 X127.027 Y103.972 E.01749 G1 X126.547 Y103.781 E.01747 G1 X126.246 Y103.746 E.01027 G1 X125.666 Y103.804 E.01972 G1 X125.224 Y104.019 E.01665 G1 X124.859 Y104.402 E.0179 G1 X124.778 Y104.282 E.00491 G1 X124.422 Y104.024 E.01489 G1 X123.991 Y103.91 E.01509 G1 X123.496 Y103.947 E.01682 G1 X123.072 Y104.128 E.01559 G1 X122.696 Y104.465 E.01708 G1 X122.429 Y104.953 E.01884 G1 X122.334 Y105.456 E.01733 G1 X122.363 Y105.971 E.01747 G1 X122.53 Y106.456 E.01736 G1 X122.821 Y106.836 E.01619 G1 X123.216 Y107.107 E.0162 G1 X123.686 Y107.231 E.01647 G1 X124.17 Y107.201 E.0164 G1 X124.573 Y107.022 E.01492 G1 X124.792 Y106.801 E.01056 ;PATH_TASK id=689 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X124.745 Y106.703 Z1.2 F21000 G1 X124.86 Y107.434 G1 X124.887 Y107.456 G1 X124.915 Y107.478 G1 X124.944 Y107.501 G1 X124.974 Y107.522 G1 X125.006 Y107.544 G1 X125.038 Y107.565 G1 X125.071 Y107.586 G1 X125.103 Y107.606 G1 X125.137 Y107.625 G1 X125.171 Y107.644 G1 X125.205 Y107.661 G1 X125.24 Y107.678 G1 X125.275 Y107.694 G1 X125.31 Y107.71 G1 X125.346 Y107.724 G1 X125.382 Y107.738 G1 X125.418 Y107.751 G1 X125.455 Y107.764 G1 X125.496 Y107.777 G1 X125.541 Y107.79 G1 X125.587 Y107.802 G1 X125.634 Y107.813 G1 X125.68 Y107.823 G1 X125.727 Y107.832 G1 X125.774 Y107.84 G1 X125.822 Y107.847 G1 X125.87 Y107.852 G1 X125.918 Y107.857 G1 X125.971 Y107.861 G1 X126.03 Y107.864 G1 X126.09 Y107.866 G1 X126.136 Y107.867 G1 X126.181 Y107.866 G1 X126.228 Y107.865 G1 X126.274 Y107.862 G1 X126.321 Y107.859 G1 X126.367 Y107.855 G1 X126.413 Y107.85 G1 X126.459 Y107.844 G1 X126.505 Y107.837 G1 X126.55 Y107.829 G1 X126.596 Y107.82 G1 X126.641 Y107.81 G1 X126.685 Y107.799 G1 X126.73 Y107.787 G1 X126.774 Y107.774 G1 X126.818 Y107.76 G1 X126.862 Y107.745 G1 X126.905 Y107.729 G1 X126.948 Y107.712 G1 X126.99 Y107.695 G1 X127.032 Y107.676 G1 X127.074 Y107.656 G1 X127.115 Y107.635 G1 X127.156 Y107.614 G1 X127.196 Y107.591 G1 X127.236 Y107.567 G1 X127.275 Y107.543 G1 X127.313 Y107.518 G1 X127.351 Y107.492 G1 X127.389 Y107.465 G1 X127.426 Y107.437 G1 X127.462 Y107.408 G1 X127.498 Y107.379 G1 X127.533 Y107.348 G1 X127.567 Y107.317 G1 X127.601 Y107.286 G1 X127.635 Y107.253 G1 X127.662 Y107.225 G1 X127.688 Y107.197 G1 X127.718 Y107.165 G1 X127.746 Y107.132 G1 X127.775 Y107.098 G1 X127.802 Y107.064 G1 X127.829 Y107.029 G1 X127.855 Y106.993 G1 X127.88 Y106.957 G1 X127.905 Y106.921 G1 X127.928 Y106.884 G1 X127.951 Y106.846 G1 X127.973 Y106.808 G1 X127.995 Y106.77 G1 X128.015 Y106.731 G1 X128.035 Y106.691 G1 X128.054 Y106.652 G1 X128.072 Y106.611 G1 X128.091 Y106.566 G1 X128.111 Y106.516 G1 X128.13 Y106.464 G1 X128.148 Y106.413 G1 X128.164 Y106.361 G1 X128.179 Y106.308 G1 X128.193 Y106.255 G1 X128.206 Y106.202 G1 X128.217 Y106.148 G1 X128.228 Y106.093 G1 X128.237 Y106.039 G1 X128.245 Y105.984 G1 X128.253 Y105.922 G1 X128.26 Y105.854 G1 X128.265 Y105.785 G1 X128.269 Y105.715 G1 X128.271 Y105.646 G1 X128.271 Y105.596 G1 X128.271 Y105.547 G1 X128.27 Y105.497 G1 X128.268 Y105.448 G1 X128.265 Y105.4 G1 X128.261 Y105.351 G1 X128.257 Y105.303 G1 X128.251 Y105.254 G1 X128.245 Y105.206 G1 X128.238 Y105.159 G1 X128.23 Y105.111 G1 X128.221 Y105.064 G1 X128.211 Y105.017 G1 X128.2 Y104.97 G1 X128.188 Y104.924 G1 X128.175 Y104.878 G1 X128.162 Y104.833 G1 X128.147 Y104.787 G1 X128.132 Y104.742 G1 X128.115 Y104.698 G1 X128.097 Y104.653 G1 X128.079 Y104.61 G1 X128.06 Y104.566 G1 X128.039 Y104.524 G1 X128.018 Y104.481 G1 X127.996 Y104.439 G1 X127.972 Y104.398 G1 X127.948 Y104.357 G1 X127.923 Y104.317 G1 X127.897 Y104.277 G1 X127.87 Y104.238 G1 X127.843 Y104.2 G1 X127.814 Y104.162 G1 X127.784 Y104.125 G1 X127.754 Y104.089 G1 X127.723 Y104.053 G1 X127.691 Y104.018 G1 X125.38 Y101.55 G1 X124.958 Y100.861 G1 X125.106 Y100.77 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall G1 F10200 G1 X125.107 Y100.726 E.00149 G1 X124.948 Y100.358 E.01358 G1 X127.707 Y100.405 E.09339 G1 X127.951 Y100.358 E.00841 G1 X128.202 Y100.165 E.01074 G1 X128.327 Y99.805 E.01291 G1 X128.339 Y99.105 E.02369 G1 X128.261 Y98.795 E.0108 G1 X128 Y98.547 E.0122 G1 X127.739 Y98.484 E.00908 G1 X126.693 Y98.466 E.03543 G1 X126.153 Y98.478 E.01828 ;PATH_TASK id=690 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.407877 G1 X125.554 Y98.48 E.01817 ;PATH_TASK id=691 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.384819 G1 X124.801 Y98.467 E.0214 ;PATH_TASK id=692 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.424687 G1 X124.082 Y98.434 E.02286 ;PATH_TASK id=693 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X123.525 Y98.412 E.01885 G1 X122.634 Y98.397 E.03018 G1 X122.342 Y98.466 E.01014 G1 X122.086 Y98.717 E.01214 G1 X122.013 Y98.997 E.0098 G1 X122.005 Y99.461 E.0157 G1 X122.078 Y99.762 E.01049 G1 X122.261 Y99.969 E.00933 G1 X122.521 Y100.154 E.01079 G1 X122.858 Y100.486 E.01604 G1 X123.155 Y100.909 E.01747 G1 X123.394 Y101.349 E.01697 G1 X123.575 Y101.496 E.00787 G1 X123.838 Y101.567 E.00923 G1 X124.536 Y101.579 E.02364 G1 X124.796 Y101.525 E.00899 G1 X125.004 Y101.373 E.0087 G1 X125.099 Y101.228 E.00589 ;PATH_TASK id=689 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X125.106 Y100.81 E.01416 ;PATH_TASK id=694 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T3000 G1 X124.976 Y100.89 F21000 G1 X124.973 Y100.886 G1 X124.711 Y101.046 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X124.714 Y100.896 E.00507 G1 X124.501 Y100.404 E.01813 G1 X124.228 Y99.92 E.01883 G1 X127.274 Y99.969 E.10313 G1 X127.787 Y99.962 E.01735 G1 X127.896 Y99.826 E.00593 G1 X127.911 Y99.098 E.02465 G1 X127.831 Y98.943 E.00588 G1 X127.732 Y98.912 E.0035 G1 X122.626 Y98.826 E.17284 G1 X122.514 Y98.862 E.00402 G1 X122.441 Y99.004 E.0054 G1 X122.455 Y99.558 E.01875 G1 X122.911 Y99.906 E.01938 G1 X123.176 Y100.198 E.01336 G1 X123.47 Y100.608 E.01707 G1 X123.752 Y101.102 E.01927 G1 X123.999 Y101.141 E.00847 G1 X124.593 Y101.144 E.02011 G1 X124.681 Y101.071 E.00385 ;PATH_TASK id=695 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X124.976 Y100.891 Z1.2 F21000 G1 X125.38 Y101.55 G1 X123.496 Y101.518 G1 X122.042 Y99.804 G1 X122.109 Y95.837 G1 X122.111 Y95.777 G1 X122.114 Y95.721 G1 X122.118 Y95.67 G1 X122.123 Y95.621 G1 X122.128 Y95.571 G1 X122.135 Y95.522 G1 X122.143 Y95.472 G1 X122.152 Y95.424 G1 X122.163 Y95.375 G1 X122.174 Y95.327 G1 X122.187 Y95.279 G1 X122.2 Y95.231 G1 X122.215 Y95.184 G1 X122.229 Y95.142 G1 X122.243 Y95.104 G1 X122.258 Y95.067 G1 X122.273 Y95.03 G1 X122.289 Y94.993 G1 X122.306 Y94.957 G1 X122.324 Y94.921 G1 X122.341 Y94.887 G1 X122.353 Y94.866 G1 X122.363 Y94.848 G1 X122.384 Y94.81 G1 X122.406 Y94.773 G1 X122.421 Y94.749 G1 X122.426 Y94.741 G1 X122.406 Y94.728 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall G1 F10200 G1 X122.177 Y95.18 E.01716 ;PATH_TASK id=696 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X122.127 Y95.361 E.00633 G1 X122.075 Y96.036 E.02292 G1 X122.214 Y96.682 E.02237 G1 X122.524 Y97.206 E.0206 G1 X123.001 Y97.631 E.02162 G1 X123.594 Y97.926 E.02242 G1 X124.222 Y98.071 E.02182 ;PATH_TASK id=697 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.414667 G1 F10140 G1 F10200 G1 X124.878 Y98.129 E.02036 ;PATH_TASK id=698 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.383002 G1 F10080 G1 X125.546 Y98.141 E.01889 ;PATH_TASK id=699 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.409336 G1 F10020 G1 X126.138 Y98.114 E.01806 ;PATH_TASK id=695 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X126.759 Y98.017 E.02128 G1 X127.368 Y97.779 E.02214 G1 X127.897 Y97.387 E.02227 G1 X128.261 Y96.876 E.02126 G1 X128.443 Y96.301 E.0204 G1 X128.457 Y95.614 E.02327 G1 X128.276 Y94.977 E.02239 G1 X127.935 Y94.482 E.02036 G1 X127.44 Y94.088 E.02143 G1 X126.813 Y93.812 E.02319 G1 X126.219 Y93.679 E.02059 G1 X125.653 Y93.623 E.01925 G1 X124.525 Y93.634 E.0382 G1 X123.921 Y93.733 E.0207 G1 X123.373 Y93.916 E.01956 G1 X122.886 Y94.198 E.01905 G1 X122.451 Y94.638 E.02094 G1 X122.424 Y94.692 E.00206 ;PATH_TASK id=700 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T3000 G1 X122.448 Y94.708 F21000 G1 X122.445 Y94.712 G1 X122.769 Y94.925 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X122.553 Y95.409 E.01794 G1 X122.495 Y95.935 E.01791 G1 X122.576 Y96.429 E.01694 G1 X122.801 Y96.874 E.01688 G1 X123.176 Y97.236 E.01764 G1 X123.668 Y97.498 E.01887 G1 X124.243 Y97.658 E.0202 G1 F9960 G1 X124.869 Y97.733 E.02134 G1 F9720 G1 X125.506 Y97.747 E.02157 G1 X126.047 Y97.715 E.01834 G1 F9900 G1 X126.585 Y97.621 E.01849 G1 F10200 G1 X127.088 Y97.444 E.01805 G1 X127.519 Y97.16 E.01747 G1 X127.83 Y96.78 E.01662 G1 X128.012 Y96.298 E.01744 G1 X128.044 Y95.751 E.01855 G1 X127.935 Y95.258 E.01709 G1 X127.657 Y94.808 E.0179 G1 X127.259 Y94.477 E.01752 G1 X126.752 Y94.242 E.01892 G1 X126.195 Y94.109 E.01938 G1 X125.675 Y94.052 E.01771 G1 F10080 G1 X124.614 Y94.056 E.03591 G1 F10200 G1 X124.083 Y94.133 E.01816 G1 X123.571 Y94.297 E.0182 G1 X123.103 Y94.568 E.01831 G1 X122.797 Y94.896 E.01518 ;PATH_TASK id=701 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X122.477 Y94.667 Z1.2 F21000 G1 X122.492 Y94.645 G1 X122.515 Y94.614 G1 X122.539 Y94.583 G1 X122.564 Y94.553 G1 X124.825 Y91.829 G1 X125.545 Y91.842 G1 X125.166 Y91.222 G1 X125.269 Y91.159 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall G1 F10200 G1 X125.272 Y91.017 E.0048 G1 X125.113 Y90.649 E.01358 G1 X127.657 Y90.692 E.08613 G1 X128.106 Y90.654 E.01524 G1 X128.363 Y90.462 E.01086 G1 X128.493 Y90.096 E.01314 G1 X128.505 Y89.396 E.02369 G1 X128.382 Y89.019 E.01341 ;PATH_TASK id=702 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.49779 G1 F9892.942 G1 X128.279 Y88.935 E.00505 ;PATH_TASK id=703 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.545581 G1 F8952.365 G1 X128.175 Y88.851 E.00558 ;PATH_TASK id=704 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.593372 G1 F8175.112 G1 X128.071 Y88.767 E.00611 ;PATH_TASK id=705 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.641162 G1 F7522.04 G1 X127.968 Y88.683 E.00664 G1 X128.074 Y88.603 E.00664 ;PATH_TASK id=706 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.593372 G1 F8175.112 G1 X128.181 Y88.523 E.00611 ;PATH_TASK id=707 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.545581 G1 F8952.365 G1 X128.287 Y88.442 E.00558 ;PATH_TASK id=708 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.49779 G1 F9892.942 G1 X128.394 Y88.362 E.00505 ;PATH_TASK id=709 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X128.529 Y87.989 E.01341 G1 X128.537 Y87.48 E.01725 ;PATH_TASK id=710 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.499426 G1 F9857.488 G1 X128.564 Y87.38 E.00391 ;PATH_TASK id=711 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.548853 G1 F8894.467 G1 X128.59 Y87.281 E.00433 ;PATH_TASK id=712 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.59828 G1 F8102.863 G1 X128.616 Y87.181 E.00476 ;PATH_TASK id=713 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.647706 G1 F7440.649 G1 X128.643 Y87.082 E.00518 G1 X128.675 Y84.6 E.12482 ;PATH_TASK id=714 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.626588 G1 F7709.863 G1 X128.615 Y84.497 E.00576 ;PATH_TASK id=715 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.582441 G1 F8340.736 G1 X128.556 Y84.394 E.00532 ;PATH_TASK id=716 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.538294 G1 F9084.055 G1 X128.497 Y84.291 E.00489 ;PATH_TASK id=717 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.494147 G1 F9972.824 G1 X128.438 Y84.188 E.00445 ;PATH_TASK id=718 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X128.144 Y84.001 E.01178 G1 X127.986 Y83.977 E.00542 G1 X127.31 Y83.966 E.02288 G1 X127.068 Y84.011 E.00834 G1 X126.82 Y84.198 E.01052 G1 X126.694 Y84.504 E.01119 G1 X126.674 Y85.454 E.03217 G1 X126.402 Y85.132 E.01428 G1 X125.961 Y84.674 E.02151 G1 X125.433 Y84.264 E.02263 G1 X124.849 Y84.005 E.02163 G1 X124.211 Y83.928 E.02174 G1 X123.704 Y84.003 E.01735 G1 X123.152 Y84.263 E.02067 G1 X122.95 Y84.428 E.00881 G1 X122.586 Y84.844 E.0187 G1 X122.332 Y85.415 E.02115 G1 X122.235 Y86.086 E.02295 G1 X122.3 Y86.762 E.02301 G1 X122.534 Y87.372 E.02212 G1 X122.844 Y87.788 E.01756 G1 X123.268 Y88.106 E.01794 G1 X123.887 Y88.334 E.02232 ;PATH_TASK id=719 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.428378 G1 X124.332 Y88.389 E.01436 ;PATH_TASK id=720 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.422883 G1 X124.534 Y88.33 E.00665 ;PATH_TASK id=721 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X124.736 Y88.272 E.00712 G1 X124.938 Y87.937 E.01322 G1 X125.034 Y87.162 E.02646 G1 X124.982 Y86.98 E.00641 ;PATH_TASK id=722 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.420214 G1 X124.93 Y86.797 E.00594 ;PATH_TASK id=723 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.390428 G1 X124.87 Y86.717 E.0029 ;PATH_TASK id=724 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.423594 G1 X124.698 Y86.599 E.0066 ;PATH_TASK id=725 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.462435 G1 X124.527 Y86.48 E.00727 ;PATH_TASK id=726 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.489403 G1 F10078.782 G1 X124.374 Y86.442 E.00583 ;PATH_TASK id=727 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.51637 G1 F9504.699 G1 X124.222 Y86.403 E.00618 G1 X124.118 Y86.31 E.00551 G1 X124.105 Y86.058 E.00991 G1 X124.174 Y85.937 E.0055 G1 X124.282 Y85.912 E.00438 G1 X124.649 Y86.082 E.01593 ;PATH_TASK id=728 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.484233 G1 F10196.844 G1 X124.85 Y86.243 E.00944 ;PATH_TASK id=729 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.436342 G1 F10200 G1 X125.05 Y86.405 E.00842 ;PATH_TASK id=730 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.390428 G1 X125.213 Y86.598 E.00731 ;PATH_TASK id=731 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.420214 G1 X125.369 Y86.807 E.00816 ;PATH_TASK id=732 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X125.525 Y87.015 E.00881 G1 X126.04 Y87.613 E.02671 G1 X126.444 Y87.999 E.01892 G1 X127.012 Y88.37 E.02296 ;PATH_TASK id=733 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.490594 G1 F10051.966 G1 X127.129 Y88.43 E.00489 ;PATH_TASK id=734 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.531189 G1 F9216.247 G1 X127.246 Y88.489 E.00534 ;PATH_TASK id=735 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.571783 G1 F8508.823 G1 X127.363 Y88.549 E.00578 ;PATH_TASK id=736 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.612378 G1 F7902.26 G1 X127.48 Y88.609 E.00622 ;PATH_TASK id=737 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.652972 G1 F7376.421 G1 X127.597 Y88.669 E.00667 G1 X127.465 Y88.687 E.00676 ;PATH_TASK id=738 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.612378 G1 F7902.26 G1 X127.333 Y88.705 E.00631 ;PATH_TASK id=739 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.571783 G1 F8508.823 G1 X127.201 Y88.723 E.00586 ;PATH_TASK id=740 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.531189 G1 F9216.247 G1 X127.069 Y88.741 E.00541 ;PATH_TASK id=741 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.490594 G1 F10051.966 G1 X126.938 Y88.759 E.00496 ;PATH_TASK id=742 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X124.897 Y88.724 E.06908 G1 X124.561 Y88.731 E.01136 ;PATH_TASK id=743 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.424513 G1 X124.226 Y88.738 E.01064 G1 X123.783 Y88.718 E.01407 ;PATH_TASK id=744 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X123.34 Y88.698 E.01501 G1 X122.608 Y88.716 E.02479 ;PATH_TASK id=701 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X122.393 Y88.834 E.00832 G1 X122.242 Y89.027 E.00828 G1 X122.178 Y89.289 E.00912 G1 X122.17 Y89.752 E.0157 G1 X122.244 Y90.054 E.01049 G1 X122.426 Y90.26 E.00933 G1 X122.882 Y90.621 E.01969 G1 X123.274 Y91.13 E.02174 G1 X123.552 Y91.632 E.01943 G1 X123.702 Y91.765 E.00676 G1 X123.97 Y91.856 E.00958 G1 X124.715 Y91.87 E.02522 G1 X125.062 Y91.76 E.01234 G1 X125.26 Y91.529 E.0103 G1 X125.268 Y91.199 E.01117 ;PATH_TASK id=745 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T3000 G1 X125.183 Y91.251 F21000 G1 X125.072 Y91.069 G1 X124.879 Y91.187 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X124.666 Y90.696 E.01812 G1 X124.393 Y90.211 E.01884 G1 X127.203 Y90.256 E.09513 G1 X127.949 Y90.255 E.02525 G1 X128.062 Y90.117 E.00604 G1 X128.076 Y89.389 E.02465 G1 X128.04 Y89.276 E.00401 G1 F10080 G1 X127.913 Y89.205 E.00492 G1 X122.765 Y89.118 E.17428 G1 X122.67 Y89.16 E.00352 G1 F10200 G1 X122.606 Y89.296 E.00509 G1 X122.621 Y89.849 E.01873 G1 X123.076 Y90.197 E.01939 G1 X123.336 Y90.484 E.01311 G1 X123.632 Y90.895 E.01714 G1 X123.885 Y91.362 E.01798 G1 X124.01 Y91.429 E.0048 G1 X124.744 Y91.439 E.02485 G1 X124.865 Y91.359 E.00491 G1 X124.876 Y91.227 E.00448 ;PATH_TASK id=746 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X125.089 Y91.097 Z1.2 F21000 G1 X128.44 Y90.663 G1 X128.538 Y84.946 G1 X128.543 Y84.597 G1 X128.158 Y84.591 G1 Z.6 F720 G1 E.7 F1500 G1 F10200 G1 X128.113 Y84.469 E.0044 G1 X127.979 Y84.406 E.00503 G1 X127.231 Y84.408 E.02532 G1 X127.123 Y84.532 E.00555 G1 X127.084 Y86.58 E.06935 G1 X126.985 Y86.488 E.00459 G1 X126.098 Y85.434 E.04661 G1 X125.708 Y85.022 E.01922 G1 X125.279 Y84.671 E.01874 G1 X124.827 Y84.444 E.01713 G1 X124.301 Y84.35 E.01809 G1 X123.783 Y84.425 E.01772 G1 X123.353 Y84.642 E.01631 G1 X122.97 Y85.034 E.01855 G1 X122.754 Y85.486 E.01694 G1 X122.665 Y86.016 E.01819 G1 X122.697 Y86.58 E.01913 G1 X122.855 Y87.071 E.01746 G1 X123.134 Y87.47 E.01646 G1 X123.519 Y87.759 E.0163 G1 X124.022 Y87.939 E.01807 G1 X124.315 Y87.985 E.01004 G1 X124.459 Y87.944 E.00508 G1 X124.519 Y87.845 E.00394 G1 X124.608 Y87.111 E.02503 G1 X124.549 Y86.953 E.00569 G1 X124.059 Y86.844 E.01698 G1 X123.832 Y86.707 E.00899 G1 X123.685 Y86.497 E.00867 G1 X123.621 Y86.19 E.0106 G1 X123.664 Y85.871 E.01089 G1 X123.8 Y85.639 E.00913 G1 X124.007 Y85.485 E.00872 G1 X124.24 Y85.434 E.00807 G1 X124.536 Y85.49 E.01018 G1 X124.903 Y85.708 E.01446 G1 X125.327 Y86.119 E.02001 G1 X126.274 Y87.241 E.04968 G1 X126.663 Y87.627 E.01854 G1 X127.123 Y87.948 E.01899 G1 X127.588 Y88.129 E.01688 G1 X127.904 Y88.161 E.01076 G1 X128.014 Y88.134 E.00383 G1 X128.097 Y88.01 E.00504 G1 X128.157 Y84.631 E.11441 ;PATH_TASK id=747 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X128.543 Y84.637 Z1.2 F21000 G1 X128.496 Y87.394 G1 X128.46 Y88.543 G1 X127.798 Y88.528 G1 X127.76 Y88.526 G1 X127.725 Y88.524 G1 X127.69 Y88.522 G1 X127.665 Y88.52 G1 X127.63 Y88.517 G1 X127.62 Y88.516 G1 X127.613 Y88.515 G1 X127.597 Y88.669 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.652972 G1 F7376.421 G1 X127.968 Y88.683 E.0188 ;PATH_TASK id=748 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X127.971 Y88.532 Z1.2 F21000 G1 X128.46 Y88.543 G1 X128.496 Y87.394 G1 X128.538 Y84.946 G1 X128.544 Y84.576 G1 X129.258 Y84.588 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.647706 G1 F7440.649 G1 X129.248 Y87.087 E.12567 G1 X129.272 Y87.187 E.00518 ;PATH_TASK id=749 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.59828 G1 F8102.863 G1 X129.297 Y87.287 E.00476 ;PATH_TASK id=750 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.548853 G1 F8894.467 G1 X129.322 Y87.387 E.00433 ;PATH_TASK id=751 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.499426 G1 F9857.488 G1 X129.346 Y87.487 E.00391 ;PATH_TASK id=752 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X129.346 Y137.846 E1.70462 G1 X127.752 Y137.846 E.05398 ;PATH_TASK id=753 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.49142 G1 F10033.461 G1 X127.629 Y137.826 E.00463 ;PATH_TASK id=754 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.53284 G1 F9185.182 G1 X127.507 Y137.805 E.00506 ;PATH_TASK id=755 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.57426 G1 F8469.157 G1 X127.384 Y137.784 E.00549 ;PATH_TASK id=756 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.61568 G1 F7856.694 G1 X127.261 Y137.764 E.00592 ;PATH_TASK id=757 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.619959 G1 F7798.433 G1 X126.751 Y137.761 E.02451 G1 X126.657 Y137.782 E.00461 ;PATH_TASK id=758 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.579763 G1 F8382.344 G1 X126.563 Y137.802 E.00429 ;PATH_TASK id=759 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.539567 G1 F9060.773 G1 X126.469 Y137.822 E.00397 ;PATH_TASK id=760 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.49937 G1 F9858.692 G1 X126.014 Y137.846 E.01727 ;PATH_TASK id=761 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X120.654 Y137.846 E.18145 G1 X120.654 Y135.899 E.06593 ;PATH_TASK id=762 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.497952 G1 F9889.425 G1 X120.678 Y135.716 E.00698 ;PATH_TASK id=763 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.545904 G1 F8946.607 G1 X120.701 Y135.533 E.00772 ;PATH_TASK id=764 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.593857 G1 F8167.91 G1 X120.725 Y135.35 E.00845 ;PATH_TASK id=765 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.641809 G1 F7513.913 G1 X120.749 Y135.167 E.00919 G1 X120.744 Y134.414 E.03751 ;PATH_TASK id=766 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.63068 G1 F7656.187 G1 X120.721 Y134.285 E.00638 ;PATH_TASK id=767 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.58551 G1 F8293.559 G1 X120.699 Y134.157 E.00589 ;PATH_TASK id=768 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.54034 G1 F9046.689 G1 X120.676 Y134.028 E.0054 ;PATH_TASK id=769 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.49517 G1 F9950.265 G1 X120.654 Y133.899 E.00491 ;PATH_TASK id=770 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X120.654 Y82.154 E1.75154 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y83.85 E.05742 ;PATH_TASK id=771 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.494129 G1 F9973.221 G1 X129.324 Y84.034 E.00697 ;PATH_TASK id=772 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.538258 G1 F9084.715 G1 X129.302 Y84.219 E.00765 ;PATH_TASK id=773 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.582387 G1 F8341.571 G1 X129.28 Y84.403 E.00833 ;PATH_TASK id=774 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.626516 G1 F7710.814 G1 X129.263 Y84.548 E.00707 ;PATH_TASK id=775 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X129.389 Y84.548 Z1.2 F21000 G1 X128.105 Y115.334 G1 X128.103 Y115.386 G1 X128.099 Y115.437 G1 X128.095 Y115.489 G1 X128.089 Y115.54 G1 X128.083 Y115.591 G1 X128.075 Y115.641 G1 X128.066 Y115.692 G1 X128.057 Y115.742 G1 X128.046 Y115.792 G1 X128.034 Y115.841 G1 X128.02 Y115.891 G1 X128.006 Y115.939 G1 X127.991 Y115.988 G1 X127.974 Y116.036 G1 X127.957 Y116.084 G1 X127.938 Y116.131 G1 X127.918 Y116.178 G1 X127.897 Y116.224 G1 X127.875 Y116.269 G1 X127.852 Y116.315 G1 X127.827 Y116.359 G1 X127.802 Y116.403 G1 X127.776 Y116.446 G1 X127.748 Y116.489 G1 X127.72 Y116.531 G1 X127.69 Y116.573 G1 X127.66 Y116.613 G1 X127.628 Y116.653 G1 X127.596 Y116.693 G1 X127.563 Y116.731 G1 X127.529 Y116.769 G1 X127.493 Y116.806 G1 X127.457 Y116.843 G1 X127.421 Y116.878 G1 X127.383 Y116.913 G1 X127.346 Y116.946 G1 X127.324 Y116.965 G1 X127.3 Y116.985 G1 X127.265 Y117.013 G1 X127.228 Y117.042 G1 X127.19 Y117.069 G1 X127.152 Y117.096 G1 X127.113 Y117.122 G1 X127.074 Y117.147 G1 X127.034 Y117.171 G1 X126.993 Y117.194 G1 X126.952 Y117.217 G1 X126.91 Y117.238 G1 X126.868 Y117.259 G1 X126.825 Y117.279 G1 X126.782 Y117.299 G1 X126.738 Y117.317 G1 X126.693 Y117.335 G1 X126.649 Y117.352 G1 X126.604 Y117.368 G1 X126.558 Y117.384 G1 X126.512 Y117.399 G1 X126.465 Y117.413 G1 X126.418 Y117.427 G1 X126.37 Y117.44 G1 X126.322 Y117.452 G1 X126.274 Y117.464 G1 X126.224 Y117.475 G1 X126.158 Y117.489 G1 X126.083 Y117.503 G1 X126.007 Y117.516 G1 X125.926 Y117.528 G1 X125.396 Y122.784 G1 X125.397 Y122.76 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F10200 G1 X125.219 Y122.797 E.00614 G1 X124.99 Y122.976 E.00986 G1 X124.858 Y123.408 E.01527 G1 X122.229 Y123.363 E.089 G1 X121.995 Y123.405 E.00805 G1 X121.738 Y123.597 E.01086 G1 X121.608 Y123.963 E.01314 G1 X121.608 Y124.646 E.0231 G1 X121.849 Y125.033 E.01546 G1 X125.149 Y127.442 E.13828 G1 X125.429 Y127.508 E.00974 G1 X126.204 Y127.501 E.02624 G1 X126.503 Y127.327 E.01173 G1 X126.621 Y127.146 E.0073 G1 X126.669 Y126.919 E.00786 G1 X126.695 Y125.36 E.05276 G1 X127.282 Y125.37 E.01985 G1 X127.518 Y125.327 E.00811 G1 X127.774 Y125.135 E.01084 G1 X127.903 Y124.77 E.0131 G1 X127.915 Y124.071 E.02369 G1 X127.835 Y123.759 E.01088 G1 X127.642 Y123.552 E.00959 G1 X127.387 Y123.455 E.00925 G1 X126.728 Y123.44 E.02231 G1 X126.646 Y123.058 E.01322 G1 X126.399 Y122.822 E.01157 G1 X126.129 Y122.754 E.00942 G1 X125.48 Y122.743 E.02195 G1 X125.436 Y122.752 E.00154 ;PATH_TASK id=776 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T3000 G1 X125.435 Y122.785 F21000 G1 X125.48 Y122.786 G1 X125.473 Y123.171 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X125.371 Y123.201 E.00358 G1 X125.288 Y123.35 E.00581 G1 X125.28 Y123.844 E.0167 G1 X122.222 Y123.792 E.10351 G1 X122.076 Y123.861 E.00549 G1 X122.037 Y123.971 E.00392 G1 X122.027 Y124.537 E.01918 G1 X122.102 Y124.687 E.00568 G1 X125.332 Y127.045 E.13535 G1 X125.436 Y127.08 E.00372 G1 X126.146 Y127.068 E.02404 G1 X126.238 Y126.94 E.00532 G1 X126.274 Y124.925 E.06822 G1 X127.289 Y124.942 E.03436 G1 X127.436 Y124.872 E.0055 G1 X127.474 Y124.763 E.00391 G1 X127.462 Y123.97 E.02683 G1 X127.342 Y123.882 E.00505 G1 X126.292 Y123.861 E.03555 G1 X126.276 Y123.273 E.0199 G1 X126.15 Y123.185 E.0052 G1 X125.513 Y123.172 E.02156 ;PATH_TASK id=777 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X125.52 Y122.787 Z1.2 F21000 G1 X126.696 Y122.807 G1 X127.881 Y123.502 G1 X127.65 Y137.093 G1 X127.093 Y137.08 G1 X127.091 Y137.192 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.619959 G1 F7798.433 G1 X127.212 Y137.195 E.00581 ;PATH_TASK id=778 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.61568 G1 F7856.694 G1 X127.275 Y137.146 E.00381 ;PATH_TASK id=779 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.57426 G1 F8469.157 G1 X127.338 Y137.096 E.00354 ;PATH_TASK id=780 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.53284 G1 F9185.182 G1 X127.401 Y137.046 E.00326 ;PATH_TASK id=781 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.49142 G1 F10033.461 G1 X127.464 Y136.997 E.00299 ;PATH_TASK id=782 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X127.67 Y136.709 E.01201 G1 X127.703 Y136.523 E.00639 G1 X127.76 Y133.131 E.11481 G1 X127.646 Y132.765 E.01301 G1 X127.396 Y132.562 E.01089 G1 X127.16 Y132.51 E.00816 G1 X126.484 Y132.499 E.02288 G1 X126.227 Y132.551 E.00888 G1 X125.994 Y132.732 E.00998 G1 X125.868 Y133.037 E.01119 G1 X125.848 Y133.987 E.03217 G1 X125.576 Y133.665 E.01428 G1 X125.135 Y133.207 E.02151 G1 X124.607 Y132.797 E.02263 G1 X124.023 Y132.539 E.02162 G1 X123.47 Y132.455 E.01892 G1 X122.894 Y132.534 E.01969 G1 X122.326 Y132.797 E.02119 G1 X121.87 Y133.221 E.02108 G1 X121.561 Y133.778 E.02155 ;PATH_TASK id=783 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.497594 G1 F9897.212 G1 X121.506 Y133.92 E.00577 ;PATH_TASK id=784 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.545188 G1 F8959.36 G1 X121.452 Y134.063 E.00637 ;PATH_TASK id=785 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.592783 G1 F8183.864 G1 X121.397 Y134.205 E.00698 ;PATH_TASK id=786 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.640377 G1 F7531.923 G1 X121.342 Y134.348 E.00758 ;PATH_TASK id=787 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X121.322 Y134.625 E.01379 ;PATH_TASK id=788 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.648362 G1 F7432.587 G1 X121.354 Y135.224 E.03023 G1 X121.421 Y135.353 E.00733 ;PATH_TASK id=789 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.598772 G1 F8095.692 G1 X121.488 Y135.482 E.00673 ;PATH_TASK id=790 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.549181 G1 F8888.704 G1 X121.556 Y135.612 E.00613 ;PATH_TASK id=791 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.49959 G1 F9853.947 G1 X121.623 Y135.741 E.00553 ;PATH_TASK id=792 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X121.962 Y136.255 E.02084 G1 X122.442 Y136.639 E.02083 G1 X123.057 Y136.878 E.02233 G1 X123.516 Y136.949 E.01569 G1 X123.828 Y136.863 E.01096 G1 X124.064 Y136.607 E.01181 G1 X124.119 Y136.433 E.00618 G1 X124.208 Y135.695 E.02516 G1 X124.156 Y135.513 E.00641 ;PATH_TASK id=793 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.420207 G1 X124.104 Y135.331 E.00594 ;PATH_TASK id=794 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.390415 G1 X124.044 Y135.25 E.0029 ;PATH_TASK id=795 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.423602 G1 X123.872 Y135.132 E.0066 ;PATH_TASK id=796 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.462462 G1 X123.701 Y135.013 E.00727 ;PATH_TASK id=797 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.489533 G1 F10075.837 G1 X123.549 Y134.975 E.00583 ;PATH_TASK id=798 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.516604 G1 F9500.004 G1 X123.396 Y134.936 E.00618 G1 X123.288 Y134.834 E.00585 G1 X123.28 Y134.589 E.00965 G1 X123.347 Y134.471 E.00539 G1 X123.457 Y134.445 E.00442 G1 X123.823 Y134.615 E.01592 ;PATH_TASK id=799 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.484206 G1 F10197.468 G1 X124.024 Y134.777 E.00944 ;PATH_TASK id=800 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.436325 G1 F10200 G1 X124.224 Y134.938 E.00842 ;PATH_TASK id=801 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.390415 G1 X124.387 Y135.132 E.00731 ;PATH_TASK id=802 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.420207 G1 X124.543 Y135.34 E.00816 ;PATH_TASK id=803 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X124.699 Y135.548 E.00881 G1 X125.158 Y136.091 E.02406 G1 X125.618 Y136.532 E.02157 G1 X126.186 Y136.903 E.02296 ;PATH_TASK id=804 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.492489 G1 F10009.587 G1 X126.332 Y136.974 E.00609 ;PATH_TASK id=805 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.534979 G1 F9145.245 G1 X126.479 Y137.044 E.00666 ;PATH_TASK id=806 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.577469 G1 F8418.312 G1 X126.626 Y137.115 E.00724 ;PATH_TASK id=777 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.619959 G1 F7798.433 G1 X126.773 Y137.185 E.00781 G1 X127.051 Y137.192 E.01335 ;PATH_TASK id=807 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T3000 G1 X127.054 Y137.079 F21000 G1 X127.069 Y137.08 G1 X127.078 Y136.694 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X127.203 Y136.657 E.0044 G1 X127.271 Y136.544 E.00448 G1 X127.332 Y133.124 E.11577 G1 X127.298 Y133.015 E.00388 G1 X127.153 Y132.939 E.00553 G1 X126.4 Y132.943 E.02547 G1 X126.298 Y133.065 E.0054 G1 X126.258 Y135.113 E.06935 G1 X126.159 Y135.021 E.00459 G1 X125.272 Y133.968 E.04661 G1 X124.882 Y133.555 E.01922 G1 X124.453 Y133.204 E.01874 G1 X123.99 Y132.972 E.01752 G1 X123.489 Y132.884 E.01723 G1 X122.957 Y132.958 E.01819 G1 X122.527 Y133.175 E.0163 G1 X122.177 Y133.521 E.01666 G1 X121.945 Y133.968 E.01706 G1 X121.839 Y134.549 E.01998 G1 X121.871 Y135.114 E.01914 G1 X122.029 Y135.604 E.01746 G1 X122.308 Y136.003 E.01646 G1 X122.693 Y136.292 E.0163 G1 X123.196 Y136.472 E.01807 G1 X123.489 Y136.519 E.01004 G1 X123.609 Y136.495 E.00414 G1 X123.696 Y136.367 E.00525 G1 X123.782 Y135.644 E.02464 G1 X123.723 Y135.487 E.00569 G1 X123.233 Y135.378 E.01698 G1 X123.007 Y135.24 E.00896 G1 X122.854 Y135.018 E.00914 G1 X122.796 Y134.724 E.01012 G1 X122.839 Y134.402 E.01101 G1 X122.974 Y134.172 E.00903 G1 X123.182 Y134.019 E.00873 G1 X123.414 Y133.968 E.00806 G1 X123.71 Y134.023 E.01019 G1 X124.077 Y134.241 E.01446 G1 X124.501 Y134.653 E.02001 G1 X125.449 Y135.774 E.04968 G1 X125.837 Y136.16 E.01854 G1 X126.297 Y136.481 E.01899 G1 X126.762 Y136.662 E.01688 G1 X127.038 Y136.69 E.00941 ;PATH_TASK id=808 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X127.029 Y137.079 Z1.2 F21000 G1 X129.389 Y137.889 G1 X129.775 Y138.275 G1 Z.6 F720 G1 E.7 F1500 G1 F10020 G1 X120.225 Y138.275 E.32326 G1 F10200 G1 X120.225 Y81.725 E1.91415 G1 F10020 G1 X129.775 Y81.725 E.32326 G1 F10200 G1 X129.775 Y138.235 E1.91279 ;PATH_TASK id=809 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X129.389 Y137.889 Z1.2 F21000 G1 X129.389 Y137.092 G1 X127.712 Y133.448 G1 X128.162 Y133.456 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill G1 F11054.364 G1 X128.107 Y136.561 E.10512 G1 X128.028 Y136.893 E.01154 G1 X127.73 Y137.304 E.01721 G1 X127.641 Y137.391 E.0042 G1 X127.836 Y137.439 E.00681 G1 X128.939 Y137.439 E.03735 G1 X128.939 Y134.15 E.11133 G1 X128.823 Y134.117 E.00409 G1 X128.19 Y133.484 E.0303 ;PATH_TASK id=810 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X128.486 Y136.986 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.524107 G1 F9351.874 G1 X128.505 Y136.761 E.00902 ;PATH_TASK id=811 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.485105 G1 F10176.736 G1 X128.525 Y136.536 E.00829 ;PATH_TASK id=812 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.465604 G1 F10646.251 G1 X128.542 Y134.437 E.07377 ;PATH_TASK id=813 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X127.65 Y137.093 Z1.2 F21000 G1 X126.972 Y137.077 G1 X126.933 Y137.075 G1 X126.897 Y137.073 G1 X126.862 Y137.07 G1 X126.827 Y137.066 G1 X126.792 Y137.061 G1 X126.758 Y137.056 G1 X126.723 Y137.05 G1 X126.688 Y137.043 G1 X126.654 Y137.036 G1 X126.62 Y137.028 G1 X126.586 Y137.019 G1 X126.552 Y137.009 G1 X126.518 Y136.999 G1 X126.484 Y136.988 G1 X126.452 Y136.976 G1 X126.424 Y136.966 G1 X126.398 Y136.956 G1 X126.347 Y136.935 G1 X126.292 Y136.911 G1 X126.239 Y136.886 G1 X126.185 Y136.86 G1 X126.132 Y136.832 G1 X126.08 Y136.803 G1 X126.028 Y136.773 G1 X125.976 Y136.742 G1 X125.925 Y136.709 G1 X125.875 Y136.676 G1 X125.825 Y136.641 G1 X125.775 Y136.605 G1 X125.726 Y136.567 G1 X125.677 Y136.529 G1 X125.63 Y136.49 G1 X125.597 Y136.463 G1 X125.562 Y136.433 G1 X125.498 Y136.374 G1 X125.433 Y136.313 G1 X125.368 Y136.249 G1 X125.302 Y136.182 G1 X125.235 Y136.112 G1 X125.167 Y136.038 G1 X125.076 Y135.937 G1 X124.972 Y135.815 G1 X124.919 Y135.751 G1 X124.577 Y136.035 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.452736 G1 F10980.555 G1 X124.514 Y136.525 E.01685 G1 X124.397 Y136.834 E.01126 G1 X124.005 Y137.235 E.01911 ;PATH_TASK id=814 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.484941 G1 F10180.523 G1 X123.852 Y137.313 E.00628 ;PATH_TASK id=815 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.527774 G1 F9281.154 G1 X123.7 Y137.39 E.00689 ;PATH_TASK id=816 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.524393 G1 F9346.333 G1 X123.948 Y137.415 E.01 ;PATH_TASK id=817 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.452741 G1 F10980.423 G1 X124.197 Y137.439 E.00851 G1 X126.008 Y137.439 E.0617 G1 X126.287 Y137.409 E.00958 G1 X125.818 Y137.166 E.01798 G1 X125.249 Y136.754 E.02395 G1 X124.839 Y136.346 E.0197 G1 X124.603 Y136.065 E.01251 ;PATH_TASK id=818 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X124.869 Y136.931 F21000 ;WIDTH:0.54421 G1 F8976.84 G1 X124.806 Y136.931 E.00261 G1 X124.775 Y136.985 E.00261 G1 X124.806 Y137.039 E.00261 G1 X124.869 Y137.039 E.00261 G1 X124.88 Y137.02 E.00094 ;PATH_TASK id=819 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X123.101 Y137.373 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.583084 G1 F8330.803 G1 X123.66 Y137.391 E.02513 ;PATH_TASK id=820 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X121.534 Y136.944 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.522778 G1 F9377.774 G1 X121.474 Y136.944 E.00239 G1 X121.444 Y136.996 E.00239 G1 X121.474 Y137.048 E.00239 G1 X121.534 Y137.048 E.00239 G1 X121.544 Y137.031 E.0008 ;PATH_TASK id=821 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X121.118 Y135.702 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X121.061 Y135.937 E.00819 G1 X121.061 Y137.439 E.05085 G1 X122.424 Y137.439 E.04616 ;PATH_TASK id=822 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.469404 G1 F10551.404 G1 X122.633 Y137.42 E.00744 ;PATH_TASK id=823 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.508213 G1 F9671.335 G1 X122.842 Y137.401 E.00812 ;PATH_TASK id=824 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.547022 G1 F8926.773 G1 X123.051 Y137.381 E.0088 ;PATH_TASK id=825 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.574755 G1 F8461.271 G1 X123.101 Y137.373 E.00223 ;PATH_TASK id=826 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.560903 G1 F8687.541 G1 X122.892 Y137.285 E.00975 ;PATH_TASK id=827 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.516542 G1 F9501.258 G1 X122.684 Y137.197 E.00891 ;PATH_TASK id=828 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.454606 G1 F10930.669 G1 X122.475 Y137.109 E.00775 G1 X121.868 Y136.727 E.02456 G1 X121.626 Y136.485 E.0117 G1 X121.14 Y135.736 E.03058 ;PATH_TASK id=829 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X121.061 Y129.809 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F11054.364 G1 X121.063 Y133.857 E.13705 G1 X121.077 Y133.888 E.00116 G1 X121.391 Y133.205 E.02544 G1 X121.579 Y132.937 E.01109 G1 X121.924 Y132.593 E.0165 G1 X122.538 Y132.226 E.02419 G1 X122.834 Y132.132 E.01053 G1 X123.313 Y132.06 E.01637 G1 X121.089 Y129.837 E.10644 ;PATH_TASK id=830 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X121.468 Y130.791 F21000 G1 F11054.364 G1 X121.468 Y132.468 E.05677 G1 X121.713 Y132.245 E.01123 G1 X122.284 Y131.898 E.02263 G1 X122.49 Y131.813 E.00752 G1 X121.496 Y130.82 E.04756 ;PATH_TASK id=831 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X121.872 Y131.676 F21000 ;WIDTH:0.400356 G1 F12000 G1 X121.805 Y131.714 E.0023 G1 X121.872 Y131.753 E.0023 G1 X121.875 Y131.749 E.00014 ;PATH_TASK id=832 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X126.779 Y127.18 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.45 G1 F11054.338 G1 X129 Y129.401 E.10633 G1 X129 Y129.977 E.01949 G1 X126.662 Y127.638 E.11194 G1 X126.523 Y127.746 E.00597 G1 X126.292 Y127.836 E.00837 G1 X126.286 Y127.838 E.00023 G1 X129 Y130.552 E.12995 G1 X129 Y131.128 E.01949 G1 X125.732 Y127.86 E.15646 G1 X125.42 Y127.854 E.01055 G3 X125.249 Y127.836 I.034 J-1.097 E.00582 G1 X125.147 Y127.809 E.00359 G1 X125.079 Y127.782 E.00249 G1 X129 Y131.704 E.18774 G1 X129 Y132.279 E.01949 G1 X123.084 Y126.363 E.2832 G1 X121.852 Y125.464 E.05164 G1 X121.731 Y125.585 E.00581 G1 X121 Y124.854 E.035 G1 X129 Y132.855 E.383 G1 X129 Y133.431 E.01949 G1 X121 Y125.43 E.383 G1 X121 Y126.006 E.01949 M73 P84 R6 G1 X127.158 Y132.164 E.29482 G1 X126.573 Y132.154 E.01983 G1 X121 Y126.581 E.26678 G1 X121 Y127.157 E.01949 G1 X126.08 Y132.238 E.24322 G1 X126.028 Y132.263 E.00197 G1 X125.878 Y132.361 E.00605 G1 X125.805 Y132.426 E.00332 G1 X125.752 Y132.485 E.00269 G1 X121 Y127.733 E.22748 G1 X121 Y128.308 E.01949 G1 X125.551 Y132.859 E.21786 G1 X125.548 Y132.864 E.00019 G1 X125.524 Y132.995 E.00449 G1 X125.517 Y133.1 E.00356 G2 X125.357 Y132.942 I-1.309 J1.164 E.00763 G1 X124.939 Y132.601 E.01826 G1 X124.842 Y132.532 E.00402 G1 X124.763 Y132.488 E.00309 G1 X124.45 Y132.335 E.01177 G1 X120.816 Y128.701 E.17395 ;PATH_TASK id=833 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X121.163 Y123.724 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.636932 G1 F7575.611 G1 X121.145 Y124.13 E.02006 ;PATH_TASK id=834 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.599647 G1 F8082.964 G1 X121.126 Y124.536 E.0188 ;PATH_TASK id=835 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.562841 G1 F8655.161 G1 X121.151 Y124.618 E.00373 ;PATH_TASK id=836 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.526515 G1 F9305.307 G1 X121.176 Y124.701 E.00347 ;PATH_TASK id=837 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.487447 G1 F10123.127 G1 X121.321 Y124.891 E.00884 ;PATH_TASK id=838 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.445636 G1 F11174.127 G1 X121.466 Y125.081 E.00801 ;PATH_TASK id=839 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.410692 G1 F12000 G1 X121.612 Y125.271 E.00732 G1 X121.701 Y125.352 E.0037 ;PATH_TASK id=840 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X121.93 Y125.039 Z1.2 F21000 G1 X121.637 Y124.825 G1 X121.661 Y123.396 G1 X124.912 Y122.776 G1 X125.992 Y122.795 G1 X126.65 Y122.806 G1 X126.654 Y122.619 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.38292 G1 F12000 G1 X126.878 Y122.837 E.00884 G1 X127 Y123.03 E.00646 ;PATH_TASK id=841 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X127.984 Y123.411 F21000 G1 F12000 G1 X128.095 Y123.527 E.00455 ;PATH_TASK id=842 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X128.356 Y123.942 F21000 ;WIDTH:0.564249 G1 F8631.789 G1 X128.363 Y124.57 E.0272 G1 X128.354 Y124.946 E.01632 ;PATH_TASK id=843 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.551114 G1 F8854.887 G1 X128.255 Y125.105 E.00792 ;PATH_TASK id=844 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.510668 G1 F9620.566 G1 X128.156 Y125.264 E.00729 ;PATH_TASK id=845 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.450428 G1 F11042.745 G1 X128.056 Y125.423 E.00635 G1 X127.629 Y125.717 E.01756 G1 X127.095 Y125.774 E.01819 G1 X127.072 Y126.964 E.0403 G1 X127.034 Y127.146 E.00632 G1 X128.939 Y129.052 E.09132 G1 X128.939 Y125.517 E.11979 ;PATH_TASK id=846 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.470222 G1 F10531.193 G1 X128.919 Y125.342 E.00626 ;PATH_TASK id=847 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.510668 G1 F9620.566 G1 X128.899 Y125.167 E.00685 ;PATH_TASK id=848 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.5623 G1 F8664.182 G1 X128.879 Y124.992 E.0076 G1 X128.883 Y124.403 E.02542 G1 X128.807 Y124.394 E.00331 G1 X128.384 Y123.971 E.02582 ;PATH_TASK id=849 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X128.532 Y125.418 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X128.301 Y125.749 E.01366 G1 X127.818 Y126.084 E.01989 G1 X127.496 Y126.155 E.01116 G1 X127.483 Y126.933 E.02633 G1 X127.474 Y127.011 E.00267 G1 X128.532 Y128.069 E.05066 G1 X128.532 Y125.458 E.08838 ;PATH_TASK id=850 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X128.17 Y126.299 F21000 ;WIDTH:0.362253 G1 F12000 G1 X127.854 Y126.449 E.00929 G1 X127.848 Y126.87 E.01118 G1 X128.169 Y127.191 E.01206 G1 X128.17 Y126.339 E.02264 ;PATH_TASK id=851 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X126.861 Y117.475 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F11054.364 G1 X129 Y119.614 E.1024 G1 X129 Y120.19 E.01949 G1 X126.584 Y117.773 E.11566 G1 X126.512 Y117.8 E.00261 G1 X126.346 Y117.844 E.00581 G1 X126.117 Y117.882 E.00786 G1 X129 Y120.765 E.13804 G1 X129 Y121.341 E.01949 G1 X125.607 Y117.948 E.16244 G1 X125.176 Y117.966 E.01461 G3 X125.047 Y117.963 I-.039 J-1.382 E.00436 G1 X129 Y121.917 E.18925 G1 X129 Y122.493 E.01949 G1 X124.441 Y117.933 E.21825 G1 X123.858 Y117.851 E.01992 G1 X123.761 Y117.829 E.00336 G1 X129 Y123.068 E.25079 G1 X129 Y123.644 E.01949 G1 X121 Y115.643 E.383 G1 X121 Y116.219 E.01949 G1 X127.984 Y123.203 E.33432 G1 X127.879 Y123.307 E.00499 G1 X127.839 Y123.263 E.00203 G1 X127.516 Y123.127 E.01186 G1 X127.432 Y123.112 E.00287 G1 X127.309 Y123.103 E.00419 G1 X121 Y116.794 E.30201 G1 X121 Y117.37 E.01949 G1 X126.036 Y122.406 E.24109 G1 X125.451 Y122.397 E.01979 G1 X121 Y117.946 E.2131 G1 X121 Y118.521 E.01949 G1 X125.001 Y122.523 E.19153 G2 X124.906 Y122.58 I.244 J.504 E.00375 G1 X124.707 Y122.771 E.00934 G1 X124.698 Y122.796 E.00089 G1 X121 Y119.097 E.17705 G1 X121 Y119.673 E.01949 G1 X124.38 Y123.054 E.16184 G1 X123.795 Y123.044 E.01983 G1 X121 Y120.249 E.1338 G1 X121 Y120.824 E.01949 G1 X123.209 Y123.034 E.10576 G1 X122.623 Y123.024 E.01983 G1 X121 Y121.4 E.07773 G1 X121 Y121.976 E.01949 G1 X122.068 Y123.045 E.05117 G1 X121.862 Y123.082 E.00709 G1 X121.672 Y123.224 E.00803 G1 X120.816 Y122.368 E.04096 ;PATH_TASK id=852 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X123.088 Y117.528 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.38292 G1 F12000 G1 X123.024 Y117.565 E.00208 G1 X123.088 Y117.602 E.00208 G1 X123.089 Y117.6 E.00007 ;PATH_TASK id=853 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X123.225 Y117.263 Z1.2 F21000 G1 X123.164 Y117.237 G1 X123.103 Y117.21 G1 X123.044 Y117.181 G1 X122.986 Y117.152 G1 X122.929 Y117.121 G1 X122.878 Y117.092 G1 X122.833 Y117.065 G1 X122.788 Y117.037 G1 X122.745 Y117.009 G1 X122.702 Y116.979 G1 X122.66 Y116.948 G1 X122.619 Y116.917 G1 X122.584 Y116.89 G1 X122.55 Y116.862 G1 X122.511 Y116.829 G1 X122.474 Y116.795 G1 X122.437 Y116.76 G1 X122.401 Y116.725 G1 X122.367 Y116.689 G1 X122.332 Y116.653 G1 X122.299 Y116.615 G1 X122.267 Y116.577 G1 X122.236 Y116.538 G1 X122.205 Y116.499 G1 X122.176 Y116.458 G1 X122.147 Y116.417 G1 X122.12 Y116.376 G1 X122.093 Y116.334 G1 X122.068 Y116.291 G1 X122.043 Y116.247 G1 X122.02 Y116.203 G1 X121.998 Y116.159 G1 X121.977 Y116.113 G1 X121.956 Y116.068 G1 X121.938 Y116.022 G1 X121.92 Y115.975 G1 X121.903 Y115.928 G1 X121.887 Y115.881 G1 X121.873 Y115.833 G1 X121.859 Y115.784 G1 X121.847 Y115.736 G1 X121.836 Y115.687 G1 X121.825 Y115.638 G1 X121.816 Y115.589 G1 X121.808 Y115.539 G1 X121.801 Y115.489 G1 X121.795 Y115.439 G1 X121.79 Y115.389 G1 X121.787 Y115.338 G1 X121.784 Y115.287 G1 X121.782 Y115.236 G1 X121.781 Y115.186 G1 X121.781 Y115.142 G1 X121.781 Y115.115 G1 X121.783 Y115.056 G1 X121.786 Y114.997 G1 X121.79 Y114.937 G1 X121.796 Y114.879 G1 X121.803 Y114.826 G1 X121.81 Y114.778 G1 X121.817 Y114.731 G1 X121.826 Y114.684 G1 X121.836 Y114.638 G1 X121.847 Y114.591 G1 X121.859 Y114.545 G1 X121.871 Y114.5 G1 X121.885 Y114.455 G1 X121.9 Y114.41 G1 X121.916 Y114.365 G1 X121.933 Y114.321 G1 X121.952 Y114.277 G1 X121.971 Y114.234 G1 X121.991 Y114.192 G1 X122.01 Y114.154 G1 X122.028 Y114.12 G1 X122.047 Y114.086 G1 X122.066 Y114.053 G1 X122.086 Y114.021 G1 X122.107 Y113.989 G1 X122.128 Y113.957 G1 X122.15 Y113.925 G1 X122.173 Y113.895 G1 X122.196 Y113.864 G1 X122.22 Y113.834 G1 X122.244 Y113.805 G1 X122.266 Y113.78 G1 X122.287 Y113.756 G1 X122.313 Y113.728 G1 X122.341 Y113.699 G1 X122.37 Y113.671 G1 X122.399 Y113.643 G1 X122.429 Y113.616 G1 X122.459 Y113.589 G1 X122.49 Y113.564 G1 X122.521 Y113.539 G1 X122.553 Y113.514 G1 X122.585 Y113.49 G1 X122.618 Y113.467 G1 X122.652 Y113.445 G1 X122.686 Y113.424 G1 X122.72 Y113.403 G1 X122.755 Y113.383 G1 X122.79 Y113.363 G1 X122.826 Y113.345 G1 X122.862 Y113.327 G1 X122.898 Y113.309 G1 X122.935 Y113.293 G1 X122.972 Y113.277 G1 X123.009 Y113.262 G1 X123.047 Y113.248 G1 X123.085 Y113.234 G1 X123.123 Y113.222 G1 X123.162 Y113.209 G1 X123.201 Y113.198 G1 X123.24 Y113.187 G1 X123.279 Y113.177 G1 X123.319 Y113.168 G1 X123.358 Y113.159 G1 X123.399 Y113.151 G1 X123.439 Y113.144 G1 X123.479 Y113.137 G1 X123.52 Y113.132 G1 X123.512 Y112.686 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.44846 G1 F11096.331 G1 X121.061 Y110.235 E.11689 G1 X121.061 Y113.902 E.12365 G1 X121.043 Y114.58 E.02289 ;PATH_TASK id=854 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.392923 G1 F12000 G1 X121.027 Y115.261 E.01981 G1 X121.03 Y115.509 E.00722 G1 X121.122 Y115.521 E.00269 G1 X121.459 Y115.857 E.01386 G1 X121.374 Y115.335 E.01539 G1 X121.399 Y114.683 E.01899 ;PATH_TASK id=855 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.43929 G1 F11353.028 G1 X121.599 Y113.989 E.02383 G1 X121.773 Y113.693 E.01132 G1 X122.073 Y113.341 E.01522 G1 X122.348 Y113.125 E.01151 G1 X122.905 Y112.83 E.02077 G1 X123.473 Y112.695 E.01925 ;PATH_TASK id=856 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X122.712 Y112.467 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X121.468 Y111.218 E.0597 G1 X121.468 Y113.424 E.07467 G1 X121.809 Y113.032 E.01757 G1 X122.157 Y112.766 E.01484 G1 X122.677 Y112.486 E.01998 ;PATH_TASK id=857 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X121.97 Y112.293 F21000 ;WIDTH:0.57472 G1 F8461.828 G1 X121.904 Y112.293 E.00294 G1 X121.871 Y112.351 E.00294 G1 X121.904 Y112.409 E.00294 G1 X121.97 Y112.409 E.00294 G1 X121.984 Y112.386 E.00117 ;PATH_TASK id=858 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X127.052 Y107.879 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.45 G1 F11054.338 G1 X129 Y109.827 E.09327 G1 X129 Y110.403 E.01949 G1 X126.767 Y108.169 E.10691 G1 X126.322 Y108.243 E.01527 G1 X126.271 Y108.249 E.00175 G1 X129 Y110.979 E.13068 G1 X129 Y111.554 E.01949 G1 X125.647 Y108.201 E.16051 G1 X125.585 Y108.194 E.00214 G1 X125.478 Y108.175 E.00368 G3 X125.304 Y108.116 I.255 J-1.031 E.00621 G1 X124.925 Y107.944 E.0141 G1 X124.83 Y107.894 E.00363 G1 X124.808 Y107.877 E.00095 G1 X124.728 Y107.858 E.00276 G1 X129 Y112.13 E.2045 G1 X129 Y112.706 E.01949 G1 X124.265 Y107.97 E.2267 G1 X123.803 Y108.008 E.01569 G1 X123.729 Y108.01 E.00248 G1 X129 Y113.281 E.25232 G1 X129 Y113.857 E.01949 G1 X121.393 Y106.25 E.36415 G1 X121.249 Y106.394 E.00689 G1 X121.052 Y106.485 E.00734 G1 X129 Y114.433 E.38047 G1 X129 Y115.008 E.01949 G1 X128.329 Y114.337 E.03214 G1 X128.233 Y114.111 E.00832 G1 X127.989 Y113.717 E.01569 G1 X127.809 Y113.508 E.00933 G1 X127.431 Y113.186 E.01681 G1 X127.219 Y113.053 E.00845 G1 X126.905 Y112.913 E.01168 G1 X121 Y107.008 E.28267 G1 X121 Y107.583 E.01949 G1 X126.126 Y112.709 E.24538 G1 X125.994 Y112.688 E.0045 G2 X125.808 Y112.681 I-.137 J1.185 E.00634 G1 X125.548 Y112.707 E.00884 G1 X121 Y108.159 E.21772 G1 X121 Y108.735 E.01949 G1 X125.035 Y112.77 E.19315 G1 X124.991 Y112.781 E.00151 G1 X124.888 Y112.819 E.00372 G1 X124.624 Y112.935 E.00976 G1 X120.816 Y109.127 E.18228 ;PATH_TASK id=859 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X121.838 Y103.082 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.375785 G1 F12000 G1 X122.261 Y102.748 E.01493 G1 X121.838 Y102.324 E.01658 G1 X121.838 Y103.042 E.01987 ;PATH_TASK id=860 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X121.468 Y104.127 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X121.623 Y103.833 E.01125 G1 X121.875 Y103.532 E.01329 G1 X122.404 Y103.091 E.02331 G1 X122.885 Y102.848 E.01825 G1 X121.468 Y101.431 E.06786 G1 X121.468 Y104.087 E.08991 ;PATH_TASK id=861 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X121.52 Y106.051 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.470373 G1 F10527.472 G1 X121.491 Y105.468 E.02076 ;PATH_TASK id=862 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.479681 G1 F10303.129 G1 X121.532 Y105.129 E.01237 ;PATH_TASK id=863 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.492835 G1 F10001.887 G1 X121.572 Y104.791 E.01275 G1 X121.921 Y104.121 E.02827 ;PATH_TASK id=864 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.455263 G1 F10913.249 G1 X122.136 Y103.845 E.012 G1 X122.665 Y103.403 E.02361 G1 X123.125 Y103.19 E.01741 G1 X123.428 Y103.115 E.01068 G1 X123.716 Y103.103 E.00988 G1 X121.061 Y100.448 E.12874 G1 X121.061 Y103.926 E.11926 G1 X121.084 Y104.617 E.02367 G1 X121.07 Y105.384 E.02633 G1 X121.073 Y106.237 E.02924 G1 X121.341 Y106.04 E.01141 G1 X121.48 Y106.049 E.00477 ;PATH_TASK id=865 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X123.12 Y107.794 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.38292 G1 F12000 G1 X123.057 Y107.831 E.00208 G1 X123.12 Y107.867 E.00208 G1 X123.122 Y107.865 E.00007 ;PATH_TASK id=866 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X124.753 Y107.72 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 G1 F12000 G1 X124.689 Y107.757 E.00208 G1 X124.753 Y107.794 E.00208 G1 X124.754 Y107.792 E.00007 ;PATH_TASK id=867 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X127.411 Y107.95 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F11054.364 G1 X128.939 Y109.478 E.07315 G1 X128.939 Y106.505 E.10065 ;PATH_TASK id=868 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.429175 G1 F11650.35 G1 X128.96 Y106.225 E.00901 ;PATH_TASK id=869 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.369226 G1 F12000 G1 X128.981 Y105.945 E.00761 G1 X128.981 Y105.349 E.01618 G1 X128.888 Y105.338 E.00253 G1 X128.624 Y105.084 E.00995 G1 X128.661 Y105.887 E.0218 ;PATH_TASK id=870 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.385713 G1 X128.627 Y106.179 E.00838 ;PATH_TASK id=871 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.44426 G1 F11212.441 G1 X128.593 Y106.471 E.00981 G1 X128.277 Y107.158 E.02522 G1 X127.883 Y107.604 E.01988 G1 X127.728 Y107.761 E.00737 G1 X127.446 Y107.93 E.01098 ;PATH_TASK id=872 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X128.05 Y108.016 F21000 ;WIDTH:0.446444 G1 F11151.752 G1 X128.534 Y108.5 E.02296 G1 X128.534 Y107.491 E.03385 G1 X128.077 Y107.987 E.02261 ;PATH_TASK id=873 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X129.184 Y103.678 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.450003 G1 F11054.256 G1 X126.231 Y100.726 E.14132 G1 X125.646 Y100.716 E.01983 G1 X129 Y104.07 E.16058 G1 X129 Y104.646 E.01949 G1 X125.249 Y100.895 E.17957 ;PATH_TASK id=874 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X125.052 Y101.015 Z1.2 F21000 G1 X125.38 Y101.55 G1 X123.496 Y101.518 G1 X122.042 Y99.804 G1 X122.042 Y99.796 G1 X120.611 Y99.394 G1 X120.87 Y99.394 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.450008 G1 F11054.12 G1 X124.816 Y103.34 E.18888 ;PATH_TASK id=875 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X124.633 Y103.695 Z1.2 F21000 G1 X128.275 Y100.371 G1 X128.306 Y98.536 G1 X127.661 Y98.525 G1 X128.394 Y96.356 G1 X128.887 Y96.451 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.548854 G1 F8894.45 G1 X128.909 Y95.798 E.02751 G1 X128.901 Y95.697 E.00425 ;PATH_TASK id=876 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X128.892 Y96.491 F21000 ;WIDTH:0.537297 G1 F9102.374 G1 X128.805 Y96.675 E.00839 ;PATH_TASK id=877 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.502378 G1 F9794.159 G1 X128.718 Y96.86 E.0078 ;PATH_TASK id=878 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.451234 G1 F11020.942 G1 X128.63 Y97.044 E.00693 G1 X128.484 Y97.3 E.01001 G1 X128.134 Y97.73 E.01883 G1 X127.631 Y98.092 E.02103 G1 X128.054 Y98.132 E.01443 G1 X128.334 Y98.281 E.01076 G1 X128.636 Y98.644 E.01602 ;PATH_TASK id=879 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.470274 G1 F10529.913 G1 X128.676 Y98.719 E.00302 ;PATH_TASK id=880 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.510824 G1 F9617.365 G1 X128.717 Y98.793 E.0033 ;PATH_TASK id=881 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.551374 G1 F8850.367 G1 X128.757 Y98.868 E.00359 ;PATH_TASK id=882 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.591924 G1 F8196.672 G1 X128.798 Y98.943 E.00388 ;PATH_TASK id=883 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.632473 G1 F7632.9 G1 X128.838 Y99.017 E.00416 ;PATH_TASK id=884 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X128.858 Y98.935 E.00416 ;PATH_TASK id=885 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.591924 G1 F8196.672 G1 X128.879 Y98.852 E.00388 ;PATH_TASK id=886 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.551374 G1 F8850.367 G1 X128.899 Y98.77 E.00359 ;PATH_TASK id=887 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.510824 G1 F9617.365 G1 X128.919 Y98.688 E.0033 ;PATH_TASK id=888 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.451055 G1 F11025.781 G1 X128.939 Y98.605 E.00288 G1 X128.939 Y97.059 E.05247 ;PATH_TASK id=889 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.473584 G1 F10448.981 G1 X128.917 Y96.795 E.00949 ;PATH_TASK id=890 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.497169 G1 F9906.461 G1 X128.896 Y96.53 E.01001 ;PATH_TASK id=891 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X128.552 Y97.859 F21000 ;WIDTH:0.463718 G1 F10693.967 G1 X128.499 Y97.859 E.00184 G1 X128.473 Y97.905 E.00184 G1 X128.499 Y97.95 E.00184 G1 X128.552 Y97.95 E.00184 G1 X128.558 Y97.94 E.00044 ;PATH_TASK id=892 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X128.838 Y99.434 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.652442 G1 F7382.835 G1 X128.838 Y99.057 E.01908 ;PATH_TASK id=893 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X128.483 Y102.045 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.547737 G1 F8914.121 G1 X128.483 Y101.028 E.04266 G1 X128.158 Y101.193 E.01531 G1 X127.708 Y101.268 E.01917 G1 X128.455 Y102.016 E.0444 ;PATH_TASK id=894 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X128.939 Y103.146 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X128.939 Y100.452 E.09119 ;PATH_TASK id=895 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.426252 G1 F11739.194 G1 X128.963 Y100.198 E.00813 ;PATH_TASK id=896 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.371363 G1 F12000 G1 X128.987 Y99.944 E.00697 G1 X128.988 Y99.834 E.003 ;PATH_TASK id=897 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.378345 G1 X128.963 Y99.767 E.00198 ;PATH_TASK id=898 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.428181 G1 F11680.4 G1 X128.938 Y99.7 E.00228 ;PATH_TASK id=899 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.478017 G1 F10342.53 G1 X128.913 Y99.634 E.00257 ;PATH_TASK id=900 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.527853 G1 F9279.644 G1 X128.888 Y99.567 E.00287 ;PATH_TASK id=901 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.577689 G1 F8414.861 G1 X128.863 Y99.5 E.00316 ;PATH_TASK id=902 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.627524 G1 F7697.517 G1 X128.838 Y99.434 E.00346 ;PATH_TASK id=903 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X128.811 Y99.5 E.00346 ;PATH_TASK id=904 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.577689 G1 F8414.861 G1 X128.785 Y99.566 E.00316 ;PATH_TASK id=905 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.527853 G1 F9279.644 G1 X128.758 Y99.632 E.00287 ;PATH_TASK id=906 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.478017 G1 F10342.53 G1 X128.731 Y99.698 E.00257 ;PATH_TASK id=907 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.428181 G1 F11680.4 G1 X128.704 Y99.763 E.00228 ;PATH_TASK id=908 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.36842 G1 F12000 G1 X128.677 Y99.829 E.00193 G1 X128.671 Y100.001 E.00466 ;PATH_TASK id=909 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.393908 G1 X128.611 Y100.186 E.00566 ;PATH_TASK id=910 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.4487 G1 F11089.761 G1 X128.55 Y100.37 E.00654 G1 X128.153 Y100.708 E.0176 G1 X127.715 Y100.812 E.01517 G1 X126.586 Y100.793 E.03809 G1 X128.911 Y103.117 E.11092 ;PATH_TASK id=911 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X129.184 Y93.891 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.450003 G1 F11054.256 G1 X126.308 Y91.015 E.13765 G1 X125.723 Y91.005 E.01983 G1 X129 Y94.283 E.15691 G1 X129 Y94.859 E.01949 G1 X125.41 Y91.269 E.17186 ;PATH_TASK id=912 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X125.253 Y91.365 Z1.2 F21000 G1 X125.545 Y91.842 G1 X123.661 Y91.809 G1 X122.207 Y90.095 G1 X122.23 Y88.722 G1 X124.486 Y88.76 G1 X125.201 Y88.772 G1 X125.209 Y88.299 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.495821 G1 F9935.946 G1 X126.163 Y88.316 E.03594 G1 X125.738 Y87.918 E.0219 G1 X125.418 Y87.555 E.01826 G1 X125.33 Y88.098 E.02074 G1 X125.23 Y88.265 E.00733 ;PATH_TASK id=913 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X124.863 Y88.221 Z1.2 F21000 G1 X124.838 Y88.437 G1 X122.23 Y88.722 G1 X122.222 Y89.191 G1 X120.611 Y89.607 G1 X120.87 Y89.607 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.450008 G1 F11054.12 G1 X124.711 Y93.448 E.18387 ;PATH_TASK id=914 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X121.864 Y93.516 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.428815 G1 F11661.202 G1 X122.279 Y93.151 E.01771 G1 X122.364 Y93.101 E.00318 G1 X121.864 Y92.601 E.0227 G1 X121.864 Y93.476 E.02806 ;PATH_TASK id=915 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X121.468 Y94.78 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X121.758 Y94.22 E.02133 G1 X122.353 Y93.589 E.02935 G1 X122.982 Y93.202 E.02501 G1 X123.012 Y93.188 E.00111 G1 X121.468 Y91.644 E.07393 G1 X121.468 Y94.74 E.10478 ;PATH_TASK id=916 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X121.46 Y98.215 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.435135 G1 F11473.298 G1 X121.811 Y97.848 E.01655 G1 X121.93 Y97.751 E.00501 G1 X121.676 Y97.391 E.01437 G1 X121.46 Y96.913 E.0171 G1 X121.46 Y98.175 E.04115 ;PATH_TASK id=917 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X121.75 Y99.991 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.469803 G1 F10541.548 G1 X122.339 Y100.548 E.02878 G1 X122.59 Y100.811 E.01289 ;PATH_TASK id=918 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.448862 G1 F11085.341 G1 X122.809 Y101.096 E.01216 ;PATH_TASK id=919 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.404271 G1 F12000 G1 X123.029 Y101.382 E.01082 G1 X123.287 Y101.663 E.01146 ;PATH_TASK id=920 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X121.75 Y99.991 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.459103 G1 F10812.551 G1 X121.671 Y99.84 E.00589 ;PATH_TASK id=921 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.509106 G1 F9652.81 G1 X121.593 Y99.689 E.0066 G1 X121.572 Y99.186 E.01951 ;PATH_TASK id=922 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.523291 G1 F9367.769 G1 X121.575 Y98.932 E.01013 ;PATH_TASK id=923 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.507694 G1 F9682.135 G1 X121.664 Y98.71 E.00926 ;PATH_TASK id=924 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.451924 G1 F11002.345 G1 X121.753 Y98.488 E.00814 G1 X122.024 Y98.186 E.01379 G1 X122.19 Y98.09 E.00653 G1 X122.611 Y97.995 E.01468 G1 X122.838 Y97.997 E.00772 G1 X122.537 Y97.778 E.01267 G1 X122.168 Y97.405 E.01784 ;PATH_TASK id=925 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.473425 G1 F10452.846 G1 X121.947 Y97.024 E.01577 ;PATH_TASK id=926 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.520277 G1 F9426.922 G1 X121.725 Y96.643 E.01749 ;PATH_TASK id=927 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.556324 G1 F8765.027 G1 X121.703 Y96.612 E.00163 ;PATH_TASK id=928 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.567794 G1 F8573.488 G1 X121.681 Y96.581 E.00167 G1 X121.613 Y95.972 E.02671 G1 X121.659 Y95.311 E.02894 ;PATH_TASK id=929 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.556981 G1 F8753.831 G1 X121.812 Y95.01 E.01444 ;PATH_TASK id=930 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.514188 G1 F9548.707 G1 X121.966 Y94.709 E.01324 ;PATH_TASK id=931 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.450702 G1 F11035.33 G1 X122.119 Y94.408 E.01145 G1 X122.64 Y93.878 E.02517 G1 X123.186 Y93.554 E.02154 G1 X123.758 Y93.358 E.02049 G1 X121.061 Y90.661 E.12932 G1 X121.061 Y94.821 E.14104 ;PATH_TASK id=932 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.471396 G1 F10502.354 G1 X121.082 Y94.975 E.00554 ;PATH_TASK id=933 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.514188 G1 F9548.707 G1 X121.103 Y95.129 E.0061 ;PATH_TASK id=934 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.56166 G1 F8674.865 G1 X121.125 Y95.283 E.00671 G1 X121.109 Y95.883 E.02588 ;PATH_TASK id=935 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.571347 G1 F8515.841 G1 X121.133 Y96.635 E.03308 ;PATH_TASK id=936 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.571104 G1 F8519.772 G1 X121.109 Y96.903 E.01179 ;PATH_TASK id=937 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.522662 G1 F9380.051 G1 X121.085 Y97.17 E.01071 ;PATH_TASK id=938 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.455754 G1 F10900.263 G1 X121.061 Y97.438 E.00922 G1 X121.062 Y98.485 E.03595 ;PATH_TASK id=939 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.468784 G1 F10566.765 M73 P84 R5 G1 X121.078 Y98.739 E.00903 ;PATH_TASK id=940 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.513726 G1 F9558.084 G1 X121.095 Y98.994 E.00998 G1 X121.095 Y99.354 E.01409 G1 X121.168 Y99.355 E.00284 G1 X121.533 Y99.727 E.02039 ;PATH_TASK id=941 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.492773 G1 F10003.267 G1 X121.629 Y99.844 E.00565 ;PATH_TASK id=942 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.475938 G1 F10392.177 G1 X121.724 Y99.96 E.00544 ;PATH_TASK id=943 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X125.059 Y102.724 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.468276 G1 F10579.373 G1 X125.516 Y102.555 E.01723 G1 X125.951 Y102.489 E.01558 G1 X125.501 Y102.038 E.02252 G1 X125.231 Y102.218 E.01147 G1 X124.708 Y102.374 E.01928 G1 X125.031 Y102.696 E.01612 ;PATH_TASK id=944 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X127.265 Y103.182 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.446101 G1 F11161.239 G1 X126.774 Y102.708 E.02287 G1 X125.463 Y101.396 E.06218 G1 X125.279 Y101.671 E.01109 G1 X124.94 Y101.902 E.01375 G1 X124.618 Y101.983 E.01113 G1 X123.794 Y101.97 E.0276 G1 X123.721 Y101.958 E.00248 G1 X124.83 Y103.066 E.05256 G1 X124.88 Y103.255 E.00655 G1 X125.384 Y103.017 E.01868 G1 X125.991 Y102.912 E.02065 G1 X126.573 Y102.938 E.01952 G1 X127.227 Y103.168 E.02324 ;PATH_TASK id=945 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X127.31 Y103.208 F21000 ;WIDTH:0.394182 G1 F12000 G1 X127.855 Y103.671 E.0209 G1 X128.11 Y103.955 E.01112 ;PATH_TASK id=946 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X128.939 Y93.359 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F11054.364 G1 X128.939 Y90.719 E.08936 ;PATH_TASK id=947 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.463808 G1 F10691.699 G1 X128.926 Y90.492 E.00794 ;PATH_TASK id=948 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.481633 G1 F10257.285 G1 X128.912 Y90.266 E.00827 G1 X128.645 Y90.75 E.02017 ;PATH_TASK id=949 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F11054.364 G1 X128.217 Y91.043 E.01757 G1 X127.865 Y91.103 E.01208 G1 X126.663 Y91.083 E.04068 G1 X128.911 Y93.33 E.1076 ;PATH_TASK id=950 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X128.499 Y92.295 F21000 ;WIDTH:0.516734 G1 F9497.398 G1 X128.499 Y91.388 E.03574 G1 X128.22 Y91.49 E.01171 G1 X127.745 Y91.541 E.01881 G1 X128.471 Y92.267 E.04043 ;PATH_TASK id=951 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X128.912 Y90.266 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.504298 G1 F9753.391 G1 X128.926 Y89.386 E.03377 G1 X128.923 Y89.355 E.00118 ;PATH_TASK id=952 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X128.92 Y89.315 F21000 ;WIDTH:0.47005 G1 F10535.438 G1 X128.939 Y89.143 E.00614 ;PATH_TASK id=953 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.432026 G1 F11564.986 G1 X128.958 Y88.972 E.00559 ;PATH_TASK id=954 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.410674 G1 F12000 G1 X128.977 Y88.8 E.00528 G1 X128.936 Y88.211 E.01805 ;PATH_TASK id=955 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.462615 G1 F10722.072 G1 X128.93 Y88.156 E.00192 ;PATH_TASK id=956 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.445583 G1 F11175.604 G1 X128.806 Y88.375 E.00842 ;PATH_TASK id=957 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.384986 G1 F12000 G1 X128.682 Y88.594 E.00715 G1 X128.578 Y88.694 E.00411 G1 X128.703 Y88.845 E.00557 ;PATH_TASK id=958 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.394002 G1 X128.77 Y88.989 E.00465 ;PATH_TASK id=959 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.432026 G1 F11564.986 G1 X128.836 Y89.134 E.00516 ;PATH_TASK id=960 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.451038 G1 F11026.232 G1 X128.903 Y89.279 E.00541 ;PATH_TASK id=961 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X128.93 Y88.156 F21000 ;WIDTH:0.469114 G1 F10558.571 G1 X128.94 Y87.575 E.0206 ;PATH_TASK id=962 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X128.57 Y83.362 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.369016 G1 F12000 G1 X128.57 Y82.93 E.01171 G1 X128.029 Y82.92 E.01467 ;PATH_TASK id=963 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.379829 G1 X127.962 Y82.945 E.00199 ;PATH_TASK id=964 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.428715 G1 F11664.241 G1 X127.896 Y82.969 E.00228 ;PATH_TASK id=965 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.477601 G1 F10352.439 G1 X127.829 Y82.994 E.00257 ;PATH_TASK id=966 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.526486 G1 F9305.868 G1 X127.763 Y83.018 E.00285 ;PATH_TASK id=967 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.575372 G1 F8451.474 G1 X127.696 Y83.043 E.00314 ;PATH_TASK id=968 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.624258 G1 F7740.774 G1 X127.629 Y83.067 E.00343 ;PATH_TASK id=969 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X127.695 Y83.095 E.00343 ;PATH_TASK id=970 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.575372 G1 F8451.474 G1 X127.76 Y83.122 E.00314 ;PATH_TASK id=971 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.526486 G1 F9305.868 G1 X127.825 Y83.15 E.00285 ;PATH_TASK id=972 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.477601 G1 F10352.439 G1 X127.891 Y83.177 E.00257 ;PATH_TASK id=973 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.428715 G1 F11664.241 G1 X127.956 Y83.205 E.00228 ;PATH_TASK id=974 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.367253 G1 F12000 G1 X128.022 Y83.233 E.00191 G1 X128.359 Y83.255 E.00911 G1 X128.534 Y83.344 E.00531 ;PATH_TASK id=975 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X127.178 Y83.065 F21000 ;WIDTH:0.644378 G1 F7481.819 G1 X127.589 Y83.067 E.02058 ;PATH_TASK id=976 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X126.125 Y83.651 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.592959 G1 F8181.242 G1 X126.581 Y83.279 E.0269 G1 X126.858 Y83.15 E.01401 ;PATH_TASK id=977 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.619381 G1 F7806.251 G1 X127.178 Y83.065 E.01583 G1 X126.5 Y83.038 E.0325 ;PATH_TASK id=978 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.596387 G1 F8130.577 G1 X125.27 Y83.038 E.05659 G1 X124.586 Y83.051 E.03151 G1 X125.252 Y83.211 E.03151 G1 X125.952 Y83.555 E.03592 G1 X126.09 Y83.632 E.00726 ;PATH_TASK id=979 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X123.543 Y83.086 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.665714 G1 F7225.504 G1 X123.811 Y83.066 E.01394 ;PATH_TASK id=980 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.620471 G1 F7791.527 G1 X124.08 Y83.046 E.01292 G1 X124.546 Y83.051 E.02239 ;PATH_TASK id=981 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X121.832 Y83.891 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.364167 G1 F12000 G1 X122.349 Y83.401 E.01904 G1 X122.463 Y83.332 E.00353 G1 X121.832 Y83.332 E.01685 G1 X121.832 Y83.851 E.01385 ;PATH_TASK id=982 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X121.499 Y85.274 F21000 ;WIDTH:0.49637 G1 F9923.933 G1 X121.671 Y84.892 E.0158 ;PATH_TASK id=983 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.45301 G1 F10973.213 G1 X121.843 Y84.51 E.01429 G1 X122.114 Y84.119 E.0162 G1 X122.539 Y83.712 E.02007 G1 X123.11 Y83.364 E.0228 ;PATH_TASK id=984 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.473566 G1 F10449.434 G1 X123.197 Y83.309 E.00369 ;PATH_TASK id=985 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.520698 G1 F9418.602 G1 X123.283 Y83.253 E.00409 ;PATH_TASK id=986 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.567831 G1 F8572.89 G1 X123.37 Y83.197 E.0045 ;PATH_TASK id=987 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.614963 G1 F7866.54 G1 X123.456 Y83.141 E.0049 ;PATH_TASK id=988 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.662096 G1 F7267.728 G1 X123.543 Y83.086 E.0053 ;PATH_TASK id=989 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.663522 G1 F7251.025 G1 X123.469 Y83.063 E.004 ;PATH_TASK id=990 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.619242 G1 F7808.14 G1 X123.395 Y83.041 E.00371 ;PATH_TASK id=991 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.574962 G1 F8457.987 G1 X123.32 Y83.019 E.00343 ;PATH_TASK id=992 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.530682 G1 F9225.824 G1 X123.246 Y82.997 E.00314 ;PATH_TASK id=993 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.486401 G1 F10146.994 G1 X123.172 Y82.975 E.00286 ;PATH_TASK id=994 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.454857 G1 F10924 G2 X121.468 Y82.968 I-1.273 J100.526 E.05837 G1 X121.468 Y84.432 E.05016 G1 X121.486 Y85.116 E.02344 ;PATH_TASK id=995 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.48716 G1 F10129.659 G1 X121.495 Y85.234 E.00437 ;PATH_TASK id=996 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X121.466 Y86.727 F21000 ;WIDTH:0.430257 G1 F11617.79 G1 X121.449 Y85.911 E.02628 ;PATH_TASK id=997 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.438079 G1 F11387.835 G1 X121.472 Y85.612 E.00983 ;PATH_TASK id=998 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.462661 G1 F10720.897 G1 X121.496 Y85.314 E.01045 ;PATH_TASK id=999 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X121.474 Y86.794 F21000 ;WIDTH:0.486127 G1 F10153.275 G1 X121.49 Y87.472 E.02499 G1 X121.49 Y88.694 E.04506 G1 X121.762 Y88.29 E.01798 G1 X122.024 Y88.079 E.01237 G1 X121.724 Y87.615 E.02035 G1 X121.486 Y86.832 E.03017 ;PATH_TASK id=1000 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X121.836 Y90.23 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.545302 G1 F8957.328 G1 X121.768 Y90.068 E.00736 ;PATH_TASK id=1001 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.597606 G1 F8112.708 G1 X121.699 Y89.905 E.00812 G1 X121.695 Y89.285 E.02861 ;PATH_TASK id=1002 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.57889 G1 F8396.003 G1 X121.748 Y89.152 E.00638 ;PATH_TASK id=1003 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.533432 G1 F9174.088 G1 X121.801 Y89.019 E.00584 ;PATH_TASK id=1004 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.487975 G1 F10111.118 G1 X121.855 Y88.886 E.0053 ;PATH_TASK id=1005 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.450198 G1 F11048.978 G1 X122.15 Y88.508 E.01624 G1 X122.382 Y88.368 E.00918 G1 X122.685 Y88.288 E.01062 G1 X122.824 Y88.288 E.00472 G1 X122.452 Y87.952 E.01699 G1 X122.085 Y87.382 E.02294 G1 X121.871 Y86.678 E.02493 G1 X121.838 Y85.918 E.02578 G1 X121.931 Y85.347 E.01958 G1 X122.217 Y84.672 E.02482 G1 X122.405 Y84.404 E.0111 G1 X122.75 Y84.06 E.0165 G1 X123.361 Y83.694 E.02412 G1 X123.639 Y83.602 E.00991 G1 X124.183 Y83.523 E.01863 G1 X124.48 Y83.53 E.01007 G1 X125.149 Y83.678 E.02318 G1 X125.728 Y83.977 E.02208 G1 X126.218 Y84.358 E.02103 G1 X126.296 Y84.436 E.00374 G1 X126.5 Y83.947 E.01797 G1 X126.952 Y83.623 E.0188 G1 X127.31 Y83.559 E.01232 G1 X128.21 Y83.602 E.03053 G1 X128.701 Y83.884 E.01917 G1 X128.873 Y84.102 E.00941 G1 X128.939 Y83.753 E.01201 G1 X128.939 Y82.561 E.04039 G1 X121.061 Y82.561 E.26682 G1 X121.061 Y88.522 E.20188 G1 X121.068 Y88.791 E.00913 ;PATH_TASK id=1006 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.487976 G1 F10111.091 G1 X121.091 Y88.957 E.00619 ;PATH_TASK id=1007 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.533436 G1 F9174.021 G1 X121.114 Y89.123 E.00683 ;PATH_TASK id=1008 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.598172 G1 F8104.438 G1 X121.136 Y89.289 E.00773 G1 X121.137 Y89.539 E.01155 G1 X121.218 Y89.56 E.0039 G1 X121.604 Y89.945 E.02515 ;PATH_TASK id=1009 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.583018 G1 F8331.821 G1 X121.707 Y90.072 E.00735 ;PATH_TASK id=1010 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.56416 G1 F8633.26 G1 X121.811 Y90.199 E.00709 ;PATH_TASK id=1011 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X123.441 Y91.991 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.407867 G1 F12000 G1 X123.204 Y91.701 E.01137 ;PATH_TASK id=1012 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.45776 G1 F10847.555 G1 X122.967 Y91.411 E.01292 ;PATH_TASK id=1013 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.507972 G1 F9676.346 G1 X122.73 Y91.121 E.01448 G1 X122.18 Y90.605 E.02914 G1 X121.92 Y90.332 E.0146 ;PATH_TASK id=1014 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X126.131 Y92.854 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.451091 G1 F11024.791 G1 X125.616 Y92.339 E.02471 ;PATH_TASK id=1015 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.470408 G1 F10526.623 G1 X125.377 Y92.493 E.0101 ;PATH_TASK id=1016 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.509041 G1 F9654.155 G1 X125.138 Y92.646 E.01101 ;PATH_TASK id=1017 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.546769 G1 F8931.252 G1 X125.056 Y92.692 E.00392 ;PATH_TASK id=1018 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.583593 G1 F8322.972 G1 X124.975 Y92.737 E.00421 ;PATH_TASK id=1019 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.58314 G1 F8329.941 G1 X125.13 Y92.756 E.00704 ;PATH_TASK id=1020 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.545412 G1 F8955.373 G1 X125.286 Y92.775 E.00655 ;PATH_TASK id=1021 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.507684 G1 F9682.346 G1 X125.441 Y92.794 E.00606 ;PATH_TASK id=1022 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.460161 G1 F10785.148 G1 X125.597 Y92.813 E.00544 G1 X126.091 Y92.851 E.01719 ;PATH_TASK id=1023 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X127.787 Y93.877 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.402549 G1 F12000 G1 X127.497 Y93.616 E.01168 ;PATH_TASK id=1024 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449268 G1 F11074.255 G1 X127.207 Y93.354 E.01319 G1 X125.601 Y91.747 E.07678 G1 X125.331 Y92.058 E.01388 G1 X124.874 Y92.264 E.01694 G1 X123.788 Y92.237 E.03671 G1 X124.725 Y93.175 E.04478 G1 X124.725 Y93.22 E.00154 G1 X125.765 Y93.222 E.03513 G1 X126.386 Y93.296 E.02114 G1 X127.11 Y93.487 E.0253 ;PATH_TASK id=1025 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.434183 G1 F11501.236 G1 X127.431 Y93.672 E.01205 ;PATH_TASK id=1026 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.418366 G1 F11985.761 G1 X127.752 Y93.857 E.01156 ;PATH_TASK id=1027 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X128.226 Y94.301 F21000 ;WIDTH:0.38292 G1 F12000 G1 X127.833 Y93.919 E.01549 ;PATH_TASK id=1028 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X127.6 Y94.24 Z1.2 F21000 G1 X127.629 Y94.26 G1 X127.669 Y94.291 G1 X127.705 Y94.32 G1 X127.74 Y94.349 G1 X127.775 Y94.379 G1 X127.809 Y94.41 G1 X127.842 Y94.441 G1 X127.874 Y94.474 G1 X127.906 Y94.506 G1 X127.937 Y94.54 G1 X127.967 Y94.574 G1 X127.998 Y94.61 G1 X128.011 Y94.627 G1 X128.027 Y94.646 G1 X128.05 Y94.676 G1 X128.074 Y94.708 G1 X128.097 Y94.741 G1 X128.119 Y94.773 G1 X128.141 Y94.807 G1 X128.161 Y94.841 G1 X128.181 Y94.875 G1 X128.2 Y94.909 G1 X128.219 Y94.945 G1 X128.237 Y94.98 G1 X128.254 Y95.016 G1 X128.27 Y95.052 G1 X128.285 Y95.089 G1 X128.3 Y95.125 G1 X128.314 Y95.163 G1 X128.327 Y95.2 G1 X128.339 Y95.238 G1 X128.35 Y95.276 G1 X128.361 Y95.314 G1 X128.371 Y95.352 G1 X128.381 Y95.391 G1 X128.389 Y95.43 G1 X128.397 Y95.469 G1 X128.404 Y95.508 G1 X128.41 Y95.547 G1 X128.416 Y95.587 G1 X128.421 Y95.627 G1 X128.425 Y95.666 G1 X128.428 Y95.706 G1 X128.431 Y95.746 G1 X128.433 Y95.787 G1 X128.435 Y95.827 G1 X128.436 Y95.867 G1 X128.436 Y95.907 G1 X128.436 Y95.947 G1 X128.271 Y105.646 G1 X128.269 Y105.715 G1 X128.265 Y105.785 G1 X128.26 Y105.854 G1 X128.253 Y105.922 G1 X128.245 Y105.984 G1 X128.237 Y106.039 G1 X128.229 Y106.088 G1 X128.103 Y115.383 G1 X128.531 Y115.403 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F11054.364 G1 X128.49 Y115.834 E.01467 G1 X128.3 Y116.409 E.02048 G1 X128.166 Y116.657 E.00955 G1 X127.845 Y117.078 E.01793 G1 X127.262 Y117.551 E.02541 G1 X127.256 Y117.582 E.00107 G1 X128.939 Y119.265 E.08056 G1 X128.939 Y115.733 E.11955 G1 X128.84 Y115.712 E.00343 G1 X128.56 Y115.431 E.01343 ;PATH_TASK id=1029 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X128.497 Y116.953 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.520695 G1 F9418.659 G1 X128.126 Y117.42 E.02369 G1 X127.903 Y117.603 E.01145 G1 X128.497 Y118.197 E.03337 G1 X128.497 Y116.993 E.04783 ;PATH_TASK id=1030 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X126.309 Y122.8 Z1.2 F21000 G1 X125.306 Y125.461 G1 X125.302 Y125.636 G1 X125.188 Y125.661 G1 X125.204 Y125.733 G1 Z.6 F720 G1 E.7 F1500 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.537622 G1 F9096.384 G1 X124.09 Y124.931 E.05645 G1 X125.217 Y124.95 E.04637 G1 X125.204 Y125.693 E.03055 ;PATH_TASK id=1031 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X125.197 Y125.659 Z1.2 F21000 G1 X125.242 Y125.297 G1 X125.483 Y122.786 G1 X125.987 Y117.519 G1 X126.265 Y115.51 G1 X126.188 Y115.424 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.557622 G1 F8742.923 G1 X125.965 Y115.533 E.01062 ;PATH_TASK id=1032 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.560204 G1 F8699.284 G1 X125.697 Y115.548 E.01156 G1 X125.482 Y115.431 E.01053 G1 X125.434 Y115.281 E.00679 G1 X125.484 Y115.129 E.00687 G1 X125.662 Y115.037 E.00859 G1 X126.028 Y115.049 E.01574 ;PATH_TASK id=1033 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.557622 G1 F8742.923 G1 X126.213 Y115.147 E.00898 G1 X126.265 Y115.287 E.00641 ;PATH_TASK id=1031 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X126.208 Y115.389 E.00499 ;PATH_TASK id=1034 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T3000 G1 X126.305 Y115.467 F21000 G1 X126.301 Y115.472 G1 X126.301 Y115.472 G1 X126.597 Y115.713 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X126.356 Y115.909 E.01053 G1 X126.01 Y116.027 E.01238 G1 X125.621 Y116.032 E.01316 G1 X125.318 Y115.931 E.0108 G1 X125.092 Y115.733 E.01015 G1 X124.963 Y115.477 E.00973 G1 X124.943 Y115.181 E.01006 G1 X125.026 Y114.919 E.00931 G1 X125.213 Y114.705 E.00963 G1 X125.479 Y114.573 E.01002 G1 X125.704 Y114.544 E.0077 G1 X126.216 Y114.588 E.01739 G1 X126.495 Y114.733 E.01064 G1 X126.686 Y114.957 E.00998 G1 X126.723 Y115.078 E.00426 G1 X126.731 Y115.465 E.01313 G1 X126.616 Y115.678 E.00818 ;PATH_TASK id=1035 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X126.312 Y115.458 Z1.2 F21000 G1 X126.474 Y113.159 G1 X126.176 Y107.866 G1 X125.987 Y105.225 G1 X126.034 Y105.351 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.589286 G1 F8236.238 G1 X126.049 Y105.341 E.00082 G1 X126.274 Y105.344 E.01023 G1 X126.397 Y105.465 E.00784 G1 X126.416 Y105.626 E.00736 ;PATH_TASK id=1036 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X126.355 Y105.806 E.00864 ;PATH_TASK id=1037 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.588868 G1 F8242.544 G1 X126.163 Y105.889 E.00949 G1 X125.949 Y105.833 E.01001 G1 X125.865 Y105.668 E.00839 ;PATH_TASK id=1035 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.589286 G1 F8236.238 G1 X125.92 Y105.43 E.01113 G1 X126.001 Y105.374 E.0045 ;PATH_TASK id=1038 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T3000 G1 X125.926 Y105.256 F21000 G1 X125.928 Y105.254 G1 X125.935 Y105.25 G1 X125.74 Y104.921 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X126.022 Y104.823 E.01011 G1 X126.458 Y104.87 E.01484 G1 X126.696 Y105.022 E.00955 G1 X126.864 Y105.263 E.00993 G1 X126.894 Y105.406 E.00495 G1 X126.884 Y105.876 E.01589 G1 X126.742 Y106.136 E.01005 G1 X126.523 Y106.306 E.00938 G1 X126.206 Y106.394 E.01115 G1 X125.879 Y106.361 E.01109 G1 X125.626 Y106.224 E.00976 G1 X125.443 Y105.999 E.0098 G1 X125.362 Y105.723 E.00975 G1 X125.385 Y105.393 E.0112 G1 X125.513 Y105.125 E.01004 G1 X125.711 Y104.948 E.00899 ;PATH_TASK id=1039 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X125.92 Y105.259 Z1.2 F21000 G1 X124.016 Y105.522 G1 X124 Y105.523 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.361739 G1 F10200 G1 X123.95 Y105.413 E.00321 G1 X123.823 Y105.378 E.00348 G1 X123.7 Y105.476 E.00416 G1 X123.694 Y105.666 E.00504 ;PATH_TASK id=1040 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.359711 G1 X123.787 Y105.76 E.00349 G1 X123.929 Y105.746 E.00376 G1 X124.004 Y105.628 E.00367 ;PATH_TASK id=1041 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.361739 G1 X124 Y105.523 E.00279 ;PATH_TASK id=1042 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T3000 G1 X124.016 Y105.522 F21000 G1 X123.93 Y105.382 G1 X124.103 Y105.043 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X124.277 Y105.184 E.00759 G1 X124.332 Y105.295 E.00418 G1 X124.389 Y105.696 E.01369 G1 X124.301 Y105.923 E.00826 G1 X124.127 Y106.086 E.00806 G1 X123.901 Y106.156 E.00798 G1 X123.661 Y106.133 E.00816 G1 X123.46 Y106.008 E.00804 G1 X123.326 Y105.803 E.00827 G1 X123.289 Y105.535 E.00918 G1 X123.347 Y105.302 E.00811 G1 X123.492 Y105.119 E.00792 G1 X123.789 Y104.994 E.0109 G1 X124.064 Y105.037 E.00942 ;PATH_TASK id=1043 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X123.924 Y105.38 Z1.2 F21000 G1 X124.053 Y103.526 G1 X122.042 Y99.804 G1 X122.065 Y98.43 G1 X124.013 Y98.005 G1 X123.918 Y96.04 G1 X123.998 Y95.94 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.567998 G1 F8570.155 G1 X123.959 Y95.87 E.00349 G1 X124.053 Y95.76 E.00632 G1 X124.391 Y95.653 E.01549 ;PATH_TASK id=1044 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.585164 G1 F8298.847 G1 X125.155 Y95.625 E.03449 G1 X126.051 Y95.655 E.04039 ;PATH_TASK id=1045 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.548945 G1 F8892.841 G1 X126.44 Y95.755 E.01691 G1 X126.6 Y95.91 E.00937 ;PATH_TASK id=1046 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X126.511 Y96.031 E.00634 G1 X126.083 Y96.152 E.01871 ;PATH_TASK id=1047 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.584163 G1 F8314.195 G1 X125.637 Y96.169 E.02008 ;PATH_TASK id=1048 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.585164 G1 F8298.847 G1 X125.135 Y96.167 E.02264 G1 X124.375 Y96.089 E.03446 ;PATH_TASK id=1043 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.567998 G1 F8570.155 G1 X124.021 Y95.97 E.01627 ;PATH_TASK id=1049 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T3000 G1 X123.964 Y96.071 F21000 G1 X123.864 Y95.984 G1 X123.862 Y95.982 G1 X123.542 Y96.189 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X123.463 Y95.972 E.0078 G1 X123.483 Y95.705 E.00909 G1 X123.603 Y95.492 E.00827 G1 X123.846 Y95.302 E.01043 G1 X124.116 Y95.222 E.00954 G1 X124.641 Y95.138 E.01799 G1 X125.159 Y95.129 E.01754 G1 X126.108 Y95.18 E.03216 G1 X126.642 Y95.314 E.01864 G1 X126.905 Y95.493 E.01076 G1 X127.052 Y95.707 E.00879 G1 X127.09 Y95.95 E.00833 G1 X127.027 Y96.176 E.00796 G1 X126.837 Y96.398 E.00988 G1 X126.668 Y96.49 E.00651 G1 X126.125 Y96.632 E.019 G1 X125.61 Y96.665 E.01746 G1 X124.738 Y96.637 E.02954 G1 X124.19 Y96.551 E.01877 G1 X123.738 Y96.381 E.01636 G1 X123.571 Y96.217 E.00791 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:0.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;0.8 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;0.8 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1050 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 M204 T7000 M486 S0 G1 Z1.4 F720 G1 X129.346 Y137.846 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall G1 F10200 G1 X120.654 Y137.846 E.29424 G1 X120.654 Y82.154 E1.88514 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y137.806 E1.88378 ;PATH_TASK id=1051 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 M204 T3000 G1 X129.389 Y137.806 F21000 G1 X129.389 Y137.889 G1 X129.775 Y138.275 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X120.225 Y138.275 E.32326 G1 X120.225 Y81.725 E1.91415 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y138.235 E1.91279 ;PATH_TASK id=1052 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X129.389 Y137.889 Z1.4 F21000 G1 X129.389 Y135.684 G1 X128.686 Y135.684 G1 Z.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.357964 G1 F12000 G1 X128.675 Y136.517 E.02182 G1 X128.636 Y136.857 E.00896 ;PATH_TASK id=1053 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 ;WIDTH:0.405596 G1 X128.551 Y137.098 E.00771 ;PATH_TASK id=1054 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 ;WIDTH:0.448131 G1 F11105.345 G1 X128.467 Y137.339 E.00861 G1 X128.395 Y137.438 E.00411 G1 X128.938 Y137.438 E.01828 ;PATH_TASK id=1055 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 ;WIDTH:0.436846 G1 F11423.486 G1 X128.954 Y137.181 E.00844 ;PATH_TASK id=1056 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 ;WIDTH:0.405596 G1 F12000 G1 X128.969 Y136.924 E.00777 ;PATH_TASK id=1057 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 ;WIDTH:0.378651 G1 X128.99 Y135.837 E.03035 G1 X128.99 Y135.684 E.00427 G1 X128.726 Y135.684 E.00736 ;PATH_TASK id=1058 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 X128.164 Y134.774 F21000 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F11054.348 G1 X128.155 Y135.327 E.01871 G1 X129 Y135.327 E.02863 G1 X129 Y134.726 E.02036 G1 X128.651 Y134.376 E.01675 G1 X128.593 Y134.391 E.00201 G1 X128.593 Y134.318 E.00247 G1 X128.179 Y133.904 E.01985 G2 X127.957 Y132.47 I-2.279 J-.381 E.04994 G2 X126.491 Y132.067 I-1.144 J1.295 E.05329 G1 X126.35 Y132.075 E.00476 G1 X121.407 Y127.132 E.23665 G1 X121.407 Y131.277 E.1403 G1 X122.399 Y132.269 E.04749 G3 X123.991 Y132.092 I1.066 J2.336 E.05513 G1 X124.342 Y132.188 E.01234 ;PATH_TASK id=1059 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X121.03 Y133.962 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.388948 G1 F12000 G1 X121.03 Y127.31 E.19138 ;PATH_TASK id=1060 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X121.52 Y124.874 Z1.4 F21000 G1 Z.8 F720 M73 P85 R5 G1 E.7 F1500 M204 P1500 ;TYPE:Bridge ;WIDTH:0.4 G1 F3000 M106 S255 G1 X125.161 Y127.495 E.13319 G1 X125.241 Y127.527 E.00255 G1 X125.313 Y127.545 E.00221 G1 X125.381 Y127.555 E.00206 G1 X125.431 Y127.558 E.00147 G1 X125.869 Y127.565 E.01301 G1 X121.551 Y124.456 E.15799 G1 X121.558 Y124.022 E.01291 G1 X126.372 Y127.487 E.1761 G1 X126.533 Y127.363 E.00606 G1 X126.538 Y127.357 E.00023 G1 X126.623 Y127.228 E.00458 G1 X121.673 Y123.664 E.18108 G1 X121.705 Y123.574 E.00284 G1 X121.713 Y123.563 E.0004 G1 X121.925 Y123.405 E.00783 G1 X126.719 Y126.857 E.17542 G1 X126.727 Y126.423 E.01291 G1 X122.412 Y123.317 E.15784 G1 X123.038 Y123.327 E.01859 G1 X126.734 Y125.988 E.13521 G1 X126.74 Y125.615 E.01107 G1 X126.778 Y125.579 E.00154 G1 X123.664 Y123.338 E.1139 G1 X124.29 Y123.349 E.01859 G1 X127.164 Y125.418 E.10514 G1 X127.263 Y125.419 E.00294 G1 X127.524 Y125.372 E.00786 G1 X127.534 Y125.368 E.00032 G1 X127.618 Y125.305 E.00314 G1 X124.795 Y123.272 E.1033 G1 X124.86 Y123.227 E.00234 G1 X124.958 Y122.95 E.00874 G1 X127.863 Y125.041 E.10628 G1 X127.941 Y124.864 E.00574 G1 X127.943 Y124.857 E.00022 G1 X127.952 Y124.764 E.00277 G1 X127.954 Y124.666 E.00291 G1 X125.262 Y122.728 E.09849 G1 X125.374 Y122.701 E.00343 G1 X125.446 Y122.694 E.00213 G1 X125.833 Y122.7 E.01152 G1 X127.961 Y124.232 E.07785 G1 X127.963 Y124.076 E.00462 G1 X127.875 Y123.741 E.01027 G1 X127.869 Y123.731 E.00034 G1 X127.853 Y123.713 E.00072 G1 X127.191 Y123.237 E.02419 ;PATH_TASK id=1061 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X127.067 Y117.435 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 G1 F3000 G1 X122.96 Y117.226 E.12212 G1 X122.686 Y117.074 E.0093 G1 X122.527 Y116.955 E.00588 G1 X122.411 Y116.84 E.00486 G1 X127.297 Y117.089 E.14527 G1 X127.361 Y117.046 E.00229 G1 X127.422 Y116.991 E.00243 G1 X127.449 Y116.969 E.00103 G3 X127.519 Y116.902 I.807 J.775 E.00289 G1 X127.54 Y116.879 E.00093 G1 X127.6 Y116.818 E.00252 G1 X127.651 Y116.749 E.00256 G1 X122.077 Y116.466 E.1657 G1 X122.07 Y116.455 E.0004 G1 X121.881 Y116.098 E.01198 G1 X127.898 Y116.404 E.17888 G1 X127.93 Y116.348 E.00194 G1 X127.945 Y116.314 E.0011 G1 X127.978 Y116.251 E.00212 G1 X128.036 Y116.083 E.00525 G1 X128.047 Y116.055 E.00092 G1 X121.767 Y115.735 E.18671 G1 X121.701 Y115.374 E.01089 G1 X128.158 Y115.703 E.19195 G1 X128.168 Y115.613 E.00268 G1 X128.176 Y115.417 E.00582 G1 X128.182 Y115.346 E.00211 G1 X121.708 Y115.017 E.19248 G1 X121.731 Y114.722 E.00878 G1 X121.745 Y114.661 E.00185 G1 X128.18 Y114.989 E.19131 G1 X128.169 Y114.9 E.00264 G1 X128.126 Y114.729 E.00525 G1 X128.105 Y114.627 E.00308 G1 X121.858 Y114.309 E.18574 G1 X121.931 Y114.121 E.00599 G1 X122.027 Y113.96 E.00556 G1 X127.976 Y114.263 E.17685 G1 X127.968 Y114.246 E.00056 G1 X127.879 Y114.102 E.00501 G1 X127.807 Y113.972 E.00445 G1 X127.771 Y113.926 E.00172 G1 X127.75 Y113.894 E.00112 G1 X122.305 Y113.617 E.16188 G1 X122.317 Y113.603 E.00055 G1 X122.497 Y113.45 E.00701 G1 X122.771 Y113.283 E.00953 G1 X127.373 Y113.517 E.13681 G1 X127.344 Y113.491 E.00118 G1 X127.277 Y113.444 E.00243 G1 X127.253 Y113.425 E.00089 G3 X127.173 Y113.372 I.561 J-.928 E.00288 G1 X127.141 Y113.354 E.00108 G1 X127.078 Y113.315 E.00221 G1 X126.903 Y113.237 E.00568 G1 X126.741 Y113.156 E.00537 G1 X126.649 Y113.123 E.00291 G1 X124.751 Y113.026 E.05643 ;PATH_TASK id=1062 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X129 Y107.855 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F11054.348 M106 S242 G1 X129 Y109.855 E.0677 G1 X127.233 Y108.088 E.08462 G2 X128.734 Y105.584 I-1.174 J-2.406 E.10452 G1 X128.728 Y105.438 E.00494 G1 X129 Y105.71 E.01305 G1 X129 Y103.71 E.0677 ;PATH_TASK id=1063 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 X128.473 Y105.073 F21000 M204 P1500 ;TYPE:Bridge ;WIDTH:0.4 G1 F3000 M106 S255 G1 X127.663 Y107.331 E.07123 G1 X127.523 Y107.47 E.00586 G1 X127.346 Y107.598 E.00648 G1 X127.152 Y107.699 E.0065 G1 X128.211 Y104.743 E.09322 G1 X128.162 Y104.587 E.00487 G1 X128.067 Y104.391 E.00647 G1 X127.996 Y104.287 E.00375 G1 X126.708 Y107.879 E.11329 G1 X126.305 Y107.945 E.01213 G1 X127.738 Y103.946 E.12613 G1 X127.678 Y103.882 E.00261 G1 X127.448 Y103.697 E.00876 G1 X125.93 Y107.935 E.13368 G1 X125.628 Y107.9 E.00901 G1 X125.567 Y107.89 E.00185 G1 X127.142 Y103.494 E.13863 G1 X126.807 Y103.368 E.0106 G1 X125.234 Y107.759 E.13847 G1 X125.055 Y107.677 E.00586 G1 X124.989 Y107.642 E.00221 G1 X124.917 Y107.586 E.0027 G1 X126.458 Y103.286 E.13563 G1 X126.21 Y103.262 E.00739 G1 X126.132 Y103.259 E.00231 G1 X126.087 Y103.262 E.00134 G1 X124.545 Y107.565 E.13574 G1 X124.444 Y107.613 E.00332 G1 X124.373 Y107.642 E.00228 G1 X124.241 Y107.674 E.00403 G1 X124.123 Y107.685 E.00353 G1 X125.687 Y103.318 E.13773 G1 X125.599 Y103.331 E.00266 G1 X125.497 Y103.354 E.00312 G1 X125.401 Y103.393 E.00306 G1 X125.255 Y103.466 E.00484 G1 X123.733 Y107.715 E.13401 G1 X123.659 Y107.71 E.0022 G1 X123.57 Y107.695 E.00268 G1 X123.377 Y107.648 E.00589 G1 X124.811 Y103.648 E.12617 G1 X124.723 Y103.648 E.00261 G1 X124.629 Y103.592 E.00325 G1 X124.608 Y103.582 E.00067 G1 X124.505 Y103.541 E.0033 G1 X124.473 Y103.532 E.00099 G1 X123.036 Y107.541 E.12642 G1 X122.983 Y107.519 E.00172 G1 X122.941 Y107.498 E.00139 G2 X122.723 Y107.357 I-3.224 J4.757 E.00771 G1 X124.123 Y103.45 E.12324 G1 X124.108 Y103.446 E.00047 G1 X123.955 Y103.427 E.00458 G1 X123.882 Y103.43 E.00216 G1 X123.746 Y103.443 E.00406 G1 X122.431 Y107.114 E.11578 G1 X122.194 Y106.817 E.01127 G1 X122.172 Y106.778 E.00135 G1 X123.35 Y103.49 E.10368 G1 X123.332 Y103.494 E.00053 G1 X123.235 Y103.53 E.00308 G1 X122.903 Y103.68 E.01083 G1 X121.965 Y106.298 E.08256 G1 X121.926 Y106.19 E.00338 G1 X121.895 Y106.071 E.00366 G1 X121.886 Y105.994 E.00232 G1 X121.859 Y105.533 E.01369 G1 X122.485 Y103.786 E.05509 ;PATH_TASK id=1064 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X123.332 Y101.579 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 G1 F3000 G1 X124.727 Y101.603 E.04143 G1 X124.819 Y101.569 E.00291 G1 X124.901 Y101.524 E.00279 G1 X125.039 Y101.406 E.00539 G1 X125.09 Y101.342 E.00244 G1 X125.127 Y101.282 E.00206 G1 X125.13 Y101.271 E.00036 G1 X125.13 Y101.252 E.00054 G1 X123.255 Y101.221 E.05567 G1 X123.116 Y100.943 E.00923 G1 X123.064 Y100.86 E.0029 G1 X125.136 Y100.895 E.06154 G1 X125.14 Y100.615 E.00831 G1 X125.219 Y100.54 E.00323 G1 X122.803 Y100.499 E.07173 G1 X122.604 Y100.279 E.00881 G1 X122.576 Y100.254 E.00112 G1 X122.409 Y100.135 E.00609 G1 X128.183 Y100.233 E.17147 G1 X128.234 Y100.194 E.0019 G1 X128.241 Y100.185 E.00034 G1 X128.366 Y99.899 E.00927 G1 X128.369 Y99.879 E.0006 G1 X122.032 Y99.771 E.18819 G1 X121.965 Y99.577 E.00611 G1 X121.956 Y99.467 E.00327 G1 X121.956 Y99.413 E.00162 G1 X128.382 Y99.522 E.1908 G1 X128.388 Y99.165 E.0106 G1 X121.962 Y99.056 E.1908 G1 X121.964 Y99.012 E.00129 G1 X122.046 Y98.7 E.00958 G1 X128.308 Y98.807 E.18598 G1 X128.301 Y98.777 E.00089 G1 X128.295 Y98.768 E.00033 G1 X128.089 Y98.544 E.00905 G1 X128.083 Y98.539 E.0002 G1 X128.021 Y98.503 E.00214 G1 X127.928 Y98.466 E.00297 G1 X127.767 Y98.44 E.00484 G1 X122.564 Y98.352 E.15451 G1 X122.62 Y98.348 E.00166 G1 X123.099 Y98.355 E.01425 G1 X123.206 Y98.006 E.01085 G1 X127.263 Y98.075 E.12048 G1 X127.222 Y97.936 E.00428 G1 X127.54 Y97.722 E.01139 G1 X122.93 Y97.644 E.13691 G1 X122.886 Y97.616 E.00156 G1 X122.824 Y97.563 E.0024 G2 X122.524 Y97.28 I-6.414 J6.498 E.01227 G1 X127.972 Y97.372 E.16177 G1 X128.197 Y97.087 E.01079 G1 X128.235 Y97.02 E.0023 G1 X122.282 Y96.918 E.17676 G1 X122.192 Y96.753 E.00559 G1 X122.176 Y96.714 E.00126 G1 X122.122 Y96.559 E.00488 G1 X128.39 Y96.665 E.18614 G1 X128.451 Y96.497 E.00532 G1 X128.483 Y96.38 E.0036 G1 X128.491 Y96.31 E.00209 G1 X122.051 Y96.2 E.19124 G1 X122.029 Y96.085 E.00349 G1 X122.019 Y95.965 E.00358 G1 X122.018 Y95.931 E.00099 G1 X122.024 Y95.843 E.00264 G1 X128.512 Y95.953 E.19268 G1 X128.522 Y95.759 E.00576 G1 X128.504 Y95.596 E.00489 G1 X122.06 Y95.486 E.19134 G1 X122.067 Y95.416 E.00208 G1 X122.078 Y95.365 E.00155 G2 X122.124 Y95.192 I-6.122 J-1.726 E.00534 G1 X122.136 Y95.151 E.00125 G1 X122.145 Y95.13 E.00068 G1 X128.422 Y95.237 E.18639 G1 X128.405 Y95.165 E.00219 G1 X128.313 Y94.943 E.00713 G1 X128.273 Y94.878 E.00229 G1 X122.305 Y94.776 E.1772 G1 X122.424 Y94.595 E.00643 G1 X122.578 Y94.424 E.00684 G1 X128.027 Y94.516 E.16179 G1 X127.957 Y94.436 E.00317 G1 X127.626 Y94.152 E.01294 G1 X123 Y94.074 E.13735 G1 X123.289 Y93.904 E.00995 G1 X123.353 Y93.871 E.00213 G1 X123.428 Y93.841 E.00239 G1 X123.771 Y93.73 E.01071 G1 X127.295 Y93.79 E.10466 ;PATH_TASK id=1065 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X128.786 Y95.116 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F11054.348 M106 S242 G3 X128.9 Y95.697 I-2.639 J.82 E.02008 G1 X128.903 Y95.726 E.00099 G3 X128.646 Y97.066 I-2.554 J.205 E.04674 G1 X129 Y97.42 E.01696 G1 X129 Y101.565 E.1403 G1 X128.164 Y100.729 E.04003 G3 X127.716 Y100.836 I-.793 J-2.329 E.01562 G1 X125.52 Y100.799 E.07436 G3 X125.124 Y101.834 I-.888 J.254 E.04023 G1 X126.168 Y102.878 E.04995 G1 X125.253 Y103.04 E.03144 G3 X124.788 Y103.244 I-.49 J-.485 E.0176 G2 X122.577 Y103.432 I-.932 J2.13 E.0783 G1 X121 Y101.855 E.07553 G1 X121 Y97.71 E.1403 G1 X121.747 Y98.457 E.03578 G2 X121.988 Y100.3 I1.37 J.758 E.06734 ;PATH_TASK id=1066 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X121 Y91.564 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 G1 F11054.348 G1 X121 Y93.564 E.0677 G1 X121.992 Y94.557 E.04751 G3 X124.775 Y93.195 I2.684 J1.96 E.1091 G1 X123.841 Y92.27 E.0445 G3 X122.945 Y91.416 I.247 J-1.155 E.04409 G2 X121 Y89.419 I-73.089 J69.285 E.09437 G1 X121 Y85.274 E.1403 G1 X121.803 Y86.078 E.03848 G1 X121.806 Y85.998 E.00272 G3 X123.492 Y83.622 I2.512 J-.004 E.10521 G1 X122.37 Y82.5 E.05371 G1 X126.515 Y82.5 E.1403 G1 X127.553 Y83.538 E.04972 G1 X127.818 Y83.543 E.00895 G3 X129 Y84.24 I.097 J1.188 E.04952 G1 X129 Y83.957 E.00957 ;PATH_TASK id=1067 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X128.708 Y90.711 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 G1 F11054.348 G3 X128.224 Y91.067 I-1.534 J-1.579 E.0204 G3 X126.835 Y91.11 I-.807 J-3.625 E.04731 G1 X129 Y93.275 E.10366 G1 X129 Y91.275 E.0677 ;PATH_TASK id=1068 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X125.444 Y91.615 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 M204 P1500 ;TYPE:Bridge ;WIDTH:0.4 G1 F3000 M106 S255 G1 X123.462 Y91.582 E.05885 G1 X123.432 Y91.535 E.00165 G1 X123.274 Y91.221 E.01043 G1 X125.297 Y91.256 E.06008 G1 X125.306 Y90.905 E.01042 G1 X125.312 Y90.899 E.00026 G1 X123.032 Y90.86 E.06771 G1 X122.769 Y90.57 E.01161 G1 X122.741 Y90.545 E.00112 G1 X122.673 Y90.497 E.00248 G1 X128.259 Y90.592 E.16589 G1 X128.394 Y90.491 E.00499 G1 X128.401 Y90.482 E.00035 G1 X128.51 Y90.239 E.0079 G1 X122.254 Y90.132 E.18575 G1 X122.203 Y90.075 E.0023 G1 X122.199 Y90.067 E.00027 G1 X122.132 Y89.874 E.00607 G1 X122.122 Y89.773 E.003 G1 X128.546 Y89.882 E.19075 G1 X128.552 Y89.525 E.0106 G1 X122.126 Y89.416 E.1908 G1 X122.129 Y89.302 E.00338 G1 X122.188 Y89.06 E.00741 G1 X128.473 Y89.167 E.18663 G1 X128.412 Y88.985 E.00569 G1 X128.407 Y88.976 E.00031 G1 X128.268 Y88.836 E.00586 G1 X128.268 Y88.806 E.00088 G1 X122.498 Y88.708 E.17134 G1 X122.53 Y88.692 E.00105 G1 X122.59 Y88.67 E.00193 G1 X122.633 Y88.658 E.00131 G1 X122.708 Y88.644 E.00225 G1 X122.806 Y88.639 E.00293 G1 X123.083 Y88.644 E.00823 G1 X123.184 Y88.363 E.00887 G1 X124.788 Y88.39 E.04763 G1 X124.946 Y88.675 E.00969 G1 X126.5 Y88.702 E.04614 G1 X126.59 Y88.421 E.00877 G1 X128.369 Y88.451 E.0528 G1 X128.421 Y88.401 E.00214 G1 X128.426 Y88.394 E.00027 G1 X128.561 Y88.097 E.00968 G1 X126.446 Y88.061 E.0628 G1 X126.42 Y88.043 E.00093 G1 X126.322 Y87.962 E.00379 G1 X126.056 Y87.697 E.01115 G1 X128.743 Y87.743 E.0798 ;PATH_TASK id=1069 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X125.11 Y88.038 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 G1 F3000 G1 X123.04 Y88.003 E.06147 G1 X122.9 Y87.901 E.00513 G1 X122.809 Y87.823 E.00357 G1 X122.77 Y87.778 E.00177 G1 X122.74 Y87.749 E.00124 G1 X122.683 Y87.675 E.00277 G1 X122.66 Y87.639 E.00126 G1 X125.183 Y87.682 E.07492 ;PATH_TASK id=1070 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X122.251 Y87.275 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 G1 F3000 G1 X125.064 Y87.323 E.08355 G1 X125.077 Y87.214 E.00327 G1 X125.517 Y87.083 E.01362 G1 X125.729 Y87.335 E.00978 G1 X128.619 Y87.384 E.08582 G1 X128.788 Y87.056 E.01095 G1 X128.821 Y87.03 E.00125 G1 X122.3 Y86.919 E.19364 G1 X122.255 Y86.784 E.00422 G1 X122.229 Y86.682 E.00313 G1 X122.225 Y86.652 E.00091 G1 X122.217 Y86.612 E.00122 G1 X122.212 Y86.56 E.00153 G1 X129.025 Y86.676 E.20234 G1 X129.025 Y86.319 E.0106 G1 X122.193 Y86.203 E.20288 G1 X122.185 Y86.051 E.00451 G1 X122.188 Y85.993 E.00172 G1 X122.201 Y85.86 E.00399 G1 X122.203 Y85.846 E.00041 G1 X129.025 Y85.962 E.20259 G1 X129.025 Y85.605 E.0106 G1 X122.269 Y85.49 E.20064 G1 X122.281 Y85.419 E.00213 G1 X122.296 Y85.367 E.00161 G2 X122.35 Y85.209 I-5.082 J-1.825 E.00497 G1 X122.367 Y85.163 E.00144 G1 X122.382 Y85.135 E.00096 G1 X129.025 Y85.248 E.19727 G1 X129.025 Y84.891 E.0106 G1 X122.571 Y84.781 E.19168 G2 X122.672 Y84.642 I-4.124 J-3.12 E.0051 G1 X122.701 Y84.606 E.00138 G2 X122.88 Y84.429 I-3.872 J-4.094 E.00748 G1 X125.8 Y84.479 E.08671 G1 X125.989 Y84.633 E.00724 G1 X126.213 Y84.84 E.00907 G1 X126.605 Y84.711 E.01226 G1 X126.646 Y84.493 E.00658 G1 X128.736 Y84.529 E.06209 G1 X128.486 Y84.173 E.01293 G1 X128.48 Y84.167 E.00023 G1 X126.622 Y84.136 E.05518 ;PATH_TASK id=1071 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 X125.601 Y84.118 F21000 G1 F3000 G1 X123.058 Y84.075 E.07551 ;PATH_TASK id=1072 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X121 Y124.58 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F11054.348 M106 S242 G1 X121 Y122.58 E.0677 G1 X121.595 Y123.175 E.02849 G3 X122.235 Y122.932 I.811 J1.171 E.02342 G1 X124.545 Y122.971 E.07819 G3 X124.994 Y122.429 I.819 J.221 E.02456 G1 X121 Y118.435 E.1912 G1 X121 Y114.29 E.1403 G1 X121.356 Y114.646 E.01708 G3 X123.512 Y112.657 I2.392 J.429 E.10659 G1 X121 Y110.145 E.12027 G1 X121 Y106 E.1403 G1 X121.721 Y106.749 E.03523 G2 X122.896 Y107.896 I2.143 J-1.02 E.05674 G1 X129 Y114 E.29221 G1 X129 Y118.145 E.1403 G1 X127.898 Y117.058 E.05243 G3 X124.746 Y118.036 I-2.575 J-2.732 E.11565 G1 X129 Y122.29 E.20366 G1 X129 Y125.582 E.11141 G1 X128.593 Y125.175 E.01949 G1 X128.593 Y126.028 E.02889 G1 X128.035 Y125.47 E.02674 G3 X127.119 Y125.799 I-.842 J-.904 E.03384 G3 X127.026 Y127.291 I-4.087 J.494 E.05089 G3 X126.332 Y127.912 I-1.062 J-.489 E.03243 G1 X128.593 Y130.173 E.10824 G1 X128.593 Y132.173 E.0677 ;PATH_TASK id=1073 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X128.97 Y133.924 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.388948 G1 F12000 G1 X128.97 Y126.024 E.2273 ;PATH_TASK id=1074 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X124.904 Y137.285 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 ;WIDTH:0.631504 G1 F7645.468 G1 X124.831 Y137.285 E.0036 G1 X124.794 Y137.349 E.0036 G1 X124.831 Y137.412 E.0036 G1 X124.904 Y137.412 E.0036 G1 X124.921 Y137.383 E.00164 ;PATH_TASK id=1075 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X123.16 Y137.686 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 M204 P1500 ;TYPE:Bridge ;WIDTH:0.4 G1 F3000 M106 S255 G1 X121.209 Y136.322 E.0707 G1 X121.147 Y136.219 E.00357 G1 X121.087 Y136.107 E.00378 G1 X121.034 Y135.998 E.0036 G1 X121.01 Y135.943 E.00178 G1 X120.975 Y135.856 E.00278 G1 X120.975 Y135.723 E.00397 G1 X123.554 Y137.525 E.09344 G1 X123.792 Y137.525 E.00707 G1 X123.924 Y137.489 E.00407 G1 X123.955 Y137.478 E.00098 G1 X124.012 Y137.457 E.00181 G1 X124.052 Y137.438 E.00132 G1 X121.242 Y135.474 E.10182 G1 X121.313 Y135.343 E.00441 G1 X121.126 Y135.057 E.01015 G1 X120.975 Y134.99 E.00491 G1 X120.975 Y134.851 E.00412 G1 X124.368 Y137.223 E.12291 G1 X124.458 Y137.12 E.00407 G1 X124.484 Y137.086 E.00126 G1 X124.531 Y137.016 E.00251 G1 X124.577 Y136.934 E.0028 G1 X121.034 Y134.457 E.12837 G1 X121.073 Y134.448 E.0012 G1 X121.181 Y134.376 E.00386 G1 X121.273 Y134.246 E.00472 G1 X121.297 Y134.205 E.0014 G1 X126.047 Y137.525 E.17208 G1 X126.67 Y137.525 E.01851 G1 X121.473 Y133.892 E.18829 G2 X121.523 Y133.744 I-3.646 J-1.317 E.00464 G1 X121.541 Y133.697 E.00152 G1 X121.615 Y133.556 E.00471 G1 X127.293 Y137.525 E.2057 G1 X127.779 Y137.525 E.01441 G1 X127.849 Y137.479 E.00253 G1 X121.795 Y133.246 E.21933 G1 X121.842 Y133.18 E.00243 G1 X121.875 Y133.139 E.00155 G2 X122.037 Y132.98 I-3.482 J-3.696 E.00674 G1 X128.094 Y137.214 E.21943 G1 X128.125 Y137.167 E.00168 G1 X128.16 Y137.105 E.0021 G1 X128.174 Y137.075 E.00098 G1 X128.255 Y136.891 E.00598 G1 X122.321 Y132.743 E.21497 G1 X122.353 Y132.722 E.00113 G2 X122.664 Y132.561 I-6.787 J-13.532 E.0104 G1 X122.678 Y132.556 E.00043 G1 X128.34 Y136.515 E.20513 G1 X128.348 Y136.084 E.01278 G1 X123.14 Y132.444 E.18866 G1 X123.358 Y132.413 E.00655 G1 X123.457 Y132.405 E.00295 G1 X123.525 Y132.407 E.00202 G1 X123.589 Y132.415 E.00191 G2 X123.763 Y132.444 I.922 J-5.066 E.00524 G1 X127.774 Y135.247 E.14529 G1 X127.781 Y134.817 E.01279 G1 X125.611 Y133.3 E.07862 G1 X125.779 Y133.244 E.00526 G1 X125.822 Y133.012 E.00702 G1 X127.788 Y134.386 E.07122 G1 X127.796 Y133.956 E.01279 G1 X125.973 Y132.682 E.06602 G1 X126.014 Y132.637 E.00179 G1 X126.06 Y132.596 E.00183 G1 X126.173 Y132.523 E.00399 G1 X126.205 Y132.507 E.00108 G1 X126.244 Y132.491 E.00124 G1 X126.302 Y132.476 E.00179 G1 X127.803 Y133.525 E.05437 G1 X127.809 Y133.148 E.01121 G1 X127.808 Y133.14 E.00022 G1 X127.789 Y133.079 E.0019 G1 X126.662 Y132.292 E.04082 ;PATH_TASK id=1076 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X121.053 Y136.739 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.43521 G1 F11471.105 M106 S242 G1 X121.053 Y137.447 E.0231 G1 X121.823 Y137.447 E.02512 G1 X121.374 Y137.099 E.01853 G1 X121.08 Y136.769 E.01444 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 M106 S250 ;LAYER_CHANGE ;Z:1 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;1 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;1 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1077 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 M486 S0 G1 Z1.6 F720 G1 X129.346 Y137.846 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F10200 G1 X120.654 Y137.846 E.29424 G1 X120.654 Y82.154 E1.88514 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y137.806 E1.88378 ;PATH_TASK id=1078 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 M204 T3000 G1 X129.389 Y137.806 F21000 M73 P86 R5 G1 X129.389 Y137.889 G1 X129.775 Y138.275 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X120.225 Y138.275 E.32326 G1 X120.225 Y81.725 E1.91415 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y138.235 E1.91279 ;PATH_TASK id=1079 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X129.389 Y137.889 Z1.6 F21000 G1 X129.389 Y135.85 G1 X129.184 Y135.85 G1 Z1 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.461276 G1 F10756.389 G1 X127.804 Y134.47 E.06789 G1 X127.72 Y134.553 E.00412 G1 X127.364 Y134.198 E.01749 G1 X127.09 Y134.274 E.0099 G1 X127.099 Y133.765 E.01772 G1 X126.507 Y133.173 E.02911 G1 X126.503 Y133.182 E.00034 G1 X126.412 Y133.669 E.01725 G1 X129 Y136.258 E.12735 G1 X129 Y136.85 E.02058 G1 X126.045 Y133.894 E.14542 G1 X125.6 Y134.041 E.01629 G1 X129 Y137.441 E.1673 G1 X129 Y137.5 E.00206 G1 X128.468 Y137.5 E.01852 G1 X124.478 Y133.511 E.19627 G1 X124.335 Y133.394 E.00644 G1 X124.302 Y133.372 E.00138 G1 X123.906 Y133.178 E.01534 G1 X123.858 Y133.166 E.0017 G1 X123.775 Y133.154 E.00293 G3 X123.483 Y133.107 I2.203 J-14.86 E.01028 G1 X127.876 Y137.5 E.21612 G1 X127.285 Y137.5 E.02058 G1 X122.977 Y133.193 E.21191 G1 X122.95 Y133.201 E.001 G3 X122.706 Y133.328 I-4.431 J-8.267 E.00956 G1 X122.599 Y133.406 E.00461 G1 X126.693 Y137.5 E.20141 G1 X126.101 Y137.5 E.02058 G1 X122.318 Y133.717 E.18613 G1 X122.316 Y133.72 E.00011 G3 X122.183 Y133.981 I-5.615 J-2.703 E.01023 G1 X122.177 Y133.993 E.00046 G3 X122.133 Y134.124 I-2.878 J-.906 E.00479 G1 X125.51 Y137.5 E.16611 G1 X124.918 Y137.5 E.02058 G1 X121.795 Y134.377 E.15365 ;PATH_TASK id=1080 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X121.166 Y134.911 F21000 ;WIDTH:0.639612 G1 F7541.586 G1 X121.147 Y135.09 E.00891 ;PATH_TASK id=1081 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.618029 G1 F7824.604 G1 X121.127 Y135.268 E.00859 ;PATH_TASK id=1082 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X121.811 Y134.689 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X121.782 Y134.782 E.00327 G1 X122.06 Y135.209 E.01725 G1 X122.069 Y135.417 E.00705 G1 X121.727 Y136.043 E.02415 G1 X121.601 Y136.123 E.00508 G1 X121.366 Y135.976 E.00937 ;PATH_TASK id=1083 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.469569 G1 F10547.324 G1 X121.288 Y135.761 E.00813 ;PATH_TASK id=1084 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.508708 G1 F9661.057 G1 X121.21 Y135.545 E.00888 ;PATH_TASK id=1085 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.547847 G1 F8912.189 G1 X121.132 Y135.33 E.00962 ;PATH_TASK id=1086 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X121.108 Y135.559 E.00966 ;PATH_TASK id=1087 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.508708 G1 F9661.057 G1 X121.084 Y135.788 E.00891 ;PATH_TASK id=1088 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.451 G1 F11027.266 G1 X121.061 Y136.017 E.00781 G1 X121.061 Y137.439 E.04828 G1 X124.561 Y137.439 E.11878 G1 X121.839 Y134.718 E.13061 ;PATH_TASK id=1089 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X122.332 Y135.786 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X122.057 Y136.282 E.01922 G1 X121.677 Y136.523 E.01523 G1 X121.468 Y136.392 E.00835 G1 X121.468 Y137.032 E.02166 G1 X123.579 Y137.032 E.07145 G1 X122.36 Y135.814 E.05832 ;PATH_TASK id=1090 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X122.472 Y136.502 F21000 ;WIDTH:0.580202 G1 F8375.49 G1 X122.405 Y136.502 E.003 G1 X122.371 Y136.56 E.003 G1 X122.405 Y136.618 E.003 G1 X122.472 Y136.618 E.003 G1 X122.486 Y136.595 E.00121 ;PATH_TASK id=1091 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X127.749 Y134.11 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;WIDTH:0.58159 G1 F8353.909 G1 X127.682 Y134.11 E.00302 G1 X127.648 Y134.168 E.00302 G1 X127.682 Y134.226 E.00302 G1 X127.749 Y134.226 E.00302 G1 X127.763 Y134.203 E.00122 ;PATH_TASK id=1092 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X128.867 Y134.296 F21000 ;WIDTH:0.410966 G1 F12000 G1 X128.421 Y134.419 E.01414 G1 X128.959 Y134.956 E.02326 G1 X128.959 Y134.379 E.01767 G1 X128.896 Y134.323 E.00258 ;PATH_TASK id=1093 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X129.181 Y133.502 F21000 M204 P1500 ;TYPE:Internal Bridge ;WIDTH:0.4 ;HEIGHT:0.4 G1 F4500 M106 S255 G1 X128.791 Y133.892 E.02886 G1 X128.198 Y134.056 E.03215 G1 X128.152 Y133.895 E.00877 G1 X128.979 Y133.068 E.0611 G1 X128.979 Y132.431 E.03325 G1 X127.771 Y133.639 E.08924 G1 X127.528 Y133.707 E.01317 G1 X127.536 Y133.238 E.02452 G1 X128.979 Y131.795 E.10659 G1 X128.979 Y131.159 E.03325 G1 X127.332 Y132.805 E.12168 G1 X127.288 Y132.77 E.00296 G1 X127.114 Y132.732 E.00931 G1 X126.775 Y132.726 E.0177 G1 X128.979 Y130.522 E.16282 G1 X128.979 Y129.886 E.03325 G1 X125.249 Y133.616 E.2756 G1 X124.984 Y133.37 E.01886 G1 X124.915 Y133.314 E.00469 G1 X128.979 Y129.249 E.30029 G1 X128.979 Y128.613 E.03325 G1 X124.562 Y133.03 E.32634 G1 X124.539 Y133.013 E.00151 G1 X124.5 Y132.992 E.0023 G1 X124.14 Y132.815 E.02094 G1 X128.979 Y127.977 E.35752 G1 X128.979 Y127.34 E.03325 G1 X123.437 Y132.882 E.40945 ;PATH_TASK id=1094 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X121.109 Y134.574 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 G1 F4500 G1 X128.979 Y126.704 E.58147 G1 X128.979 Y126.067 E.03325 G1 X121.021 Y134.025 E.58798 G1 X121.021 Y133.389 E.03325 G1 X128.611 Y125.799 E.56081 G1 X128.49 Y125.678 E.00895 G1 X128.207 Y125.567 E.01589 G1 X121.021 Y132.753 E.53093 G1 X121.021 Y132.116 E.03325 G1 X125.844 Y127.293 E.35634 G1 X126.052 Y127.296 E.01088 G2 X126.127 Y127.291 I.005 J-.45 E.00394 G1 X126.239 Y127.247 E.00628 G1 X126.334 Y127.174 E.00624 G1 X126.418 Y127.045 E.00804 G1 X126.44 Y126.968 E.0042 G1 X126.447 Y126.898 E.00365 G1 X126.451 Y126.687 E.01106 G1 X128.004 Y125.133 E.1148 G1 X128.048 Y125.069 E.00405 G1 X127.711 Y124.79 E.02285 G1 X126.256 Y126.245 E.10749 ;PATH_TASK id=1095 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X125.419 Y127.082 F21000 G1 F4500 G1 X121.021 Y131.48 E.32491 G1 X121.021 Y130.843 E.03325 G1 X124.888 Y126.977 E.28571 G1 X124.52 Y126.708 E.02379 G1 X121.021 Y130.207 E.25853 G1 X121.021 Y129.571 E.03325 G1 X124.152 Y126.439 E.23135 G1 X123.784 Y126.171 E.02379 G1 X121.021 Y128.934 E.20417 G1 X121.021 Y128.298 E.03325 G1 X123.416 Y125.902 E.17699 G1 X123.335 Y125.843 E.00529 G1 X121.721 Y126.961 E.10259 G1 X120.819 Y127.864 E.06668 ;PATH_TASK id=1096 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X121 Y124.58 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 ;HEIGHT:0.2 G1 F11054.348 M106 S250 G1 X121 Y122.58 E.0677 G1 X121.595 Y123.175 E.02849 G3 X122.235 Y122.932 I.811 J1.17 E.02342 G1 X124.545 Y122.971 E.07819 G3 X124.994 Y122.429 I.819 J.221 E.02456 G1 X121 Y118.435 E.1912 G1 X121 Y114.29 E.1403 G1 X121.356 Y114.646 E.01708 G3 X123.512 Y112.657 I2.388 J.425 E.10662 G1 X121 Y110.145 E.12027 G1 X121 Y106 E.1403 G1 X121.706 Y106.706 E.0338 G2 X122.895 Y107.895 I2.102 J-.913 E.05827 G1 X129 Y114 E.29229 G1 X129 Y109.855 E.1403 G1 X127.233 Y108.088 E.08462 G2 X128.728 Y105.438 I-1.181 J-2.413 E.10948 G1 X129 Y105.71 E.01305 G1 X129 Y101.565 E.1403 G1 X128.164 Y100.729 E.04003 G3 X127.716 Y100.836 I-.708 J-1.97 E.01562 G1 X125.52 Y100.799 E.07437 G3 X125.124 Y101.834 I-.903 J.248 E.04014 G1 X126.137 Y102.877 E.04918 G2 X124.791 Y103.245 I.023 J2.723 E.04776 G2 X122.577 Y103.432 I-.937 J2.109 E.07845 G1 X121 Y101.855 E.07553 G1 X121 Y97.71 E.1403 G1 X121.747 Y98.457 E.03578 G2 X121.988 Y100.3 I1.332 J.763 E.06756 ;PATH_TASK id=1097 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X122.409 Y97.174 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F12000 G1 X122.803 Y97.568 E.01577 G1 X123.099 Y97.806 E.01073 ;PATH_TASK id=1098 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X124.273 Y100.758 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;WIDTH:0.50246 G1 F9792.401 G1 X124.299 Y100.464 E.01127 G1 X124.353 Y100.367 E.00424 ;PATH_TASK id=1099 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.489229 G1 F10082.706 G1 X124.128 Y100.123 E.01233 ;PATH_TASK id=1100 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.440471 G1 F11319.32 G1 X123.903 Y99.879 E.01098 G1 X123.449 Y99.409 E.02159 G1 X123.16 Y99.13 E.01327 G1 X123.103 Y99.18 E.00252 G1 X122.797 Y99.189 E.01014 G1 X122.818 Y99.4 E.00701 G1 X123.207 Y99.713 E.01651 G1 X123.589 Y100.134 E.0188 ;PATH_TASK id=1101 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.462767 G1 F10718.209 G1 X123.77 Y100.399 E.0112 ;PATH_TASK id=1102 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.489478 G1 F10077.095 G1 X123.951 Y100.664 E.01192 G1 X124 Y100.752 E.00374 G1 X124.233 Y100.757 E.00863 ;PATH_TASK id=1103 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X124.61 Y101.168 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X124.7 Y101.115 E.00354 G1 X124.722 Y100.559 E.01885 G1 X124.879 Y100.279 E.01084 G1 X123.228 Y98.629 E.07901 G1 X123.054 Y98.781 E.00782 G1 X122.591 Y98.806 E.01571 G1 X122.45 Y98.891 E.00557 G1 X122.396 Y99.116 E.00783 G1 X122.404 Y99.461 E.01167 G1 X122.5 Y99.649 E.00714 G1 X122.915 Y99.981 E.01799 G1 X123.249 Y100.358 E.01707 G1 X123.572 Y100.874 E.02061 G1 X123.748 Y101.139 E.01074 G1 X124.092 Y101.187 E.01178 G1 X124.57 Y101.169 E.01618 ;PATH_TASK id=1104 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X124.512 Y101.603 F21000 ;WIDTH:0.448911 G1 F11083.99 G1 X124.801 Y101.545 E.00996 G1 X125.052 Y101.326 E.01125 G1 X125.105 Y101.238 E.00346 G1 X125.119 Y100.648 E.01994 G1 X125.278 Y100.447 E.00863 G1 X125.423 Y100.39 E.00526 G1 X125.568 Y100.393 E.00489 G1 X123.353 Y98.178 E.10575 G1 X123.189 Y97.95 E.00946 G1 X123.178 Y98.225 E.00932 G1 X122.982 Y98.378 E.0084 G1 X122.563 Y98.381 E.01414 G1 X122.25 Y98.502 E.01132 G1 X122.085 Y98.689 E.00845 G1 X121.989 Y99.107 E.01445 G1 X122.009 Y99.557 E.01523 G1 X122.057 Y99.756 E.0069 G1 X122.372 Y100.076 E.01517 G1 X122.614 Y100.256 E.01019 G1 X122.909 Y100.582 E.01484 G1 X123.216 Y101.072 E.01951 G1 X123.377 Y101.361 E.01115 G1 X123.556 Y101.508 E.00782 G1 X123.949 Y101.592 E.01356 G1 X124.472 Y101.602 E.01767 ;PATH_TASK id=1105 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X127.144 Y103.49 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;WIDTH:0.40548 G1 F12000 G1 X127.308 Y103.63 E.00651 ;PATH_TASK id=1106 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.44037 G1 F11322.178 G1 X127.473 Y103.77 E.00714 ;PATH_TASK id=1107 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.483459 G1 F10214.778 G1 X127.637 Y103.91 E.00791 G1 X128.033 Y104.359 E.02193 ;PATH_TASK id=1108 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X128.467 Y105.058 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X126.803 Y103.394 E.07968 G1 X126.717 Y103.361 E.00311 G1 X126.532 Y103.318 E.00642 G1 X126.209 Y103.287 E.01099 G1 X126.133 Y103.284 E.00259 G1 X126.119 Y103.285 E.00048 G1 X128.322 Y105.489 E.1055 G1 X128.333 Y105.745 E.00869 G1 X128.323 Y105.865 E.00406 G1 X128.29 Y106.032 E.00576 G1 X125.613 Y103.354 E.12816 G1 X125.508 Y103.377 E.00363 G1 X125.412 Y103.415 E.00347 G1 X125.203 Y103.52 E.00794 G1 X128.18 Y106.498 E.14253 G1 X128.149 Y106.586 E.00316 G1 X127.99 Y106.883 E.01142 G1 X124.78 Y103.674 E.15364 G1 X124.719 Y103.674 E.00209 G1 X124.6 Y103.605 E.00465 G1 X124.495 Y103.564 E.0038 G1 X124.105 Y103.471 E.01359 G1 X123.987 Y103.456 E.00401 G1 X127.745 Y107.214 E.1799 G1 X127.508 Y107.449 E.01129 G1 X127.448 Y107.493 E.00252 G1 X123.452 Y103.497 E.19129 G1 X123.343 Y103.517 E.00375 G1 X123.246 Y103.552 E.00352 G1 X123.03 Y103.65 E.00802 G1 X127.085 Y107.706 E.19414 G1 X126.945 Y107.778 E.00535 G1 X126.731 Y107.849 E.00763 G1 X126.664 Y107.86 E.00228 G1 X122.673 Y103.869 E.19106 G1 X122.4 Y104.122 E.01259 G1 X122.378 Y104.15 E.0012 G1 X126.161 Y107.933 E.1811 G1 X126.093 Y107.929 E.00231 G1 X125.631 Y107.876 E.01574 G1 X125.548 Y107.861 E.00285 G1 X125.499 Y107.847 E.00172 G1 X122.151 Y104.499 E.16029 G1 X122.056 Y104.672 E.0067 G1 X121.982 Y104.879 E.00742 G1 X121.977 Y104.901 E.00076 G1 X124.592 Y107.515 E.12515 G1 X124.434 Y107.591 E.00594 G1 X124.367 Y107.618 E.00243 G1 X124.237 Y107.649 E.00453 G1 X124.158 Y107.657 E.0027 G1 X121.888 Y105.387 E.10864 G1 X121.881 Y105.462 E.00252 G1 X121.882 Y105.495 E.00113 G1 X121.91 Y105.985 E.01661 G1 X123.795 Y107.87 E.09023 ;PATH_TASK id=1109 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X126.353 Y113.034 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;WIDTH:0.391838 G1 F12000 G1 X126.877 Y113.558 E.02151 G1 X127.334 Y113.986 E.01817 G1 X128.123 Y114.78 E.03248 G1 X128.046 Y114.443 E.01003 G1 X127.736 Y113.883 E.01857 G1 X127.092 Y113.312 E.02497 G1 X126.451 Y113.049 E.02011 G1 X126.392 Y113.04 E.00173 ;PATH_TASK id=1110 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X128.342 Y115.254 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F11054.364 G1 X126.122 Y113.035 E.10625 G1 X125.951 Y113.007 E.00585 G1 X125.913 Y113.003 E.00132 G1 X125.852 Y113.001 E.00205 G1 X125.83 Y113.002 E.00076 G1 X125.543 Y113.031 E.00977 G1 X128.141 Y115.629 E.12438 G1 X128.133 Y115.698 E.00234 G1 X128.106 Y115.802 E.00362 G1 X128.012 Y116.076 E.00982 G1 X125.041 Y113.105 E.1422 G1 X125.008 Y113.118 E.00119 G1 X124.64 Y113.279 E.01363 G1 X127.829 Y116.469 E.15267 G1 X127.583 Y116.799 E.01393 G1 X123.848 Y113.063 E.17882 G1 X123.755 Y113.048 E.00318 G1 X123.698 Y113.045 E.00193 G1 X123.641 Y113.048 E.00195 G1 X123.548 Y113.064 E.0032 G1 X123.326 Y113.117 E.00772 G1 X127.276 Y117.067 E.1891 G1 X127.075 Y117.217 E.00849 G1 X126.929 Y117.296 E.00561 G1 X122.884 Y113.251 E.19363 G1 X122.846 Y113.267 E.00141 G1 X122.522 Y113.464 E.01284 G1 X126.514 Y117.456 E.19111 G1 X126.414 Y117.494 E.00361 G1 X126.279 Y117.529 E.00472 G1 X126.049 Y117.567 E.0079 G1 X122.229 Y113.747 E.18288 G1 X122.076 Y113.927 E.00801 G1 X121.985 Y114.079 E.00598 G1 X125.535 Y117.629 E.16992 G1 X125.168 Y117.644 E.01242 G1 X125.113 Y117.644 E.00186 G1 X124.969 Y117.638 E.0049 G1 X121.816 Y114.486 E.15092 G1 X121.803 Y114.518 E.00119 G1 X121.756 Y114.723 E.00712 G1 X121.736 Y114.981 E.00876 G1 X124.351 Y117.596 E.12516 G1 X123.915 Y117.534 E.01488 G1 X123.81 Y117.511 E.00364 G1 X123.639 Y117.459 E.00607 G1 X121.542 Y115.362 E.10038 ;PATH_TASK id=1111 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X129 Y120.145 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F11054.348 G1 X129 Y118.145 E.0677 G1 X127.904 Y117.049 E.05248 G3 X125.182 Y118.051 I-2.471 J-2.514 E.10119 G1 X124.746 Y118.036 E.01477 G1 X129 Y122.29 E.20366 G1 X129 Y124.29 E.0677 ;PATH_TASK id=1112 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X125.661 Y124.434 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.619768 G1 F7801.015 G1 X125.339 Y124.089 E.02268 ;PATH_TASK id=1113 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X125.522 Y123.128 F21000 ;WIDTH:0.451076 G1 F11025.212 G1 X125.334 Y123.199 E.00684 G1 X125.206 Y123.47 E.01019 G1 X124.968 Y123.678 E.0107 G1 X124.61 Y123.786 E.01271 G1 X124.312 Y123.781 E.0101 G1 X125.723 Y125.192 E.06772 G1 X125.823 Y124.962 E.00851 G1 X126.327 Y124.475 E.02379 G1 X126.417 Y124.402 E.00396 G1 X125.924 Y124.015 E.02129 G1 X125.75 Y123.798 E.00941 G1 X125.516 Y123.253 E.02015 G1 X125.52 Y123.168 E.0029 ;PATH_TASK id=1114 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X125.514 Y122.72 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X125.209 Y122.78 E.01052 G1 X124.997 Y122.945 E.00911 G1 X124.85 Y123.261 E.01178 G1 X124.617 Y123.379 E.00887 G1 X123.312 Y123.357 E.04415 G1 X126.032 Y126.077 E.1302 G1 X126.044 Y125.398 E.023 G1 X126.106 Y125.255 E.00527 G1 X126.61 Y124.768 E.02372 ;PATH_TASK id=1115 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.467727 G1 F10593.058 G1 X126.659 Y124.731 E.00215 ;PATH_TASK id=1116 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.503182 G1 F9777.05 G1 X126.707 Y124.694 E.00233 ;PATH_TASK id=1117 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.555873 G1 F8772.745 G1 X126.756 Y124.658 E.0026 G1 X127.201 Y124.652 E.01898 G1 X127.204 Y124.152 E.02132 G1 X126.727 Y124.144 E.02034 ;PATH_TASK id=1118 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.540368 G1 F9046.169 G1 X126.557 Y124.005 E.00907 ;PATH_TASK id=1119 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.504221 G1 F9755.03 G1 X126.387 Y123.867 E.00841 ;PATH_TASK id=1120 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.454011 G1 F10946.502 G1 X126.217 Y123.728 E.0075 G1 X126.104 Y123.586 E.00619 G1 X126.026 Y123.382 E.00746 G1 X125.927 Y123.254 E.00552 G1 X125.922 Y123.182 E.00249 G1 X125.981 Y123.06 E.00462 ;PATH_TASK id=1121 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.43831 G1 F11381.181 G1 X126.27 Y122.798 E.01283 ;PATH_TASK id=1122 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.404464 G1 F12000 G1 X126.41 Y122.764 E.00434 G1 X126.495 Y122.813 E.00294 G1 X126.255 Y122.746 E.00748 ;PATH_TASK id=1123 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.42662 G1 F11727.912 G1 X125.554 Y122.722 E.02238 ;PATH_TASK id=1124 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X126.495 Y122.813 F21000 ;WIDTH:0.38292 G1 F12000 G1 X126.65 Y122.966 E.00616 G1 X126.821 Y123.241 E.00916 G1 X126.98 Y123.353 E.00548 ;PATH_TASK id=1125 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.399915 G1 X127.212 Y123.4 E.00703 ;PATH_TASK id=1126 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.422958 G1 F11840.932 G1 X127.444 Y123.447 E.00748 G1 X127.812 Y123.666 E.01354 ;PATH_TASK id=1127 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.38292 G1 F12000 G1 X127.904 Y123.805 E.00471 ;PATH_TASK id=1128 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.404736 G1 X127.894 Y123.866 E.00188 ;PATH_TASK id=1129 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.448366 G1 F11098.902 G1 X127.884 Y123.928 E.0021 ;PATH_TASK id=1130 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.491996 G1 F10020.578 G1 X127.874 Y123.99 E.00233 ;PATH_TASK id=1131 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.535627 G1 F9133.232 G1 X127.864 Y124.051 E.00256 ;PATH_TASK id=1132 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.579257 G1 F8390.255 G1 X127.854 Y124.113 E.00278 ;PATH_TASK id=1133 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.601072 G1 F8062.325 G1 X127.844 Y124.174 E.00289 ;PATH_TASK id=1134 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X126.208 Y126.54 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;WIDTH:0.45 G1 F11054.338 G1 X123.02 Y123.352 E.15262 G1 X122.434 Y123.342 E.01983 G1 X125.958 Y126.867 E.16872 G1 X125.453 Y126.858 E.01712 G1 X125.162 Y126.646 E.01217 G1 X121.941 Y123.425 E.15422 G1 X121.731 Y123.581 E.00886 G1 X121.727 Y123.586 E.00021 G1 X121.675 Y123.734 E.00533 G1 X123.292 Y125.351 E.0774 G1 X122.952 Y125.587 E.014 G1 X121.4 Y124.035 E.07429 ;PATH_TASK id=1135 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X128.016 Y98.661 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;WIDTH:0.662438 G1 F7263.712 G1 X128.167 Y98.824 E.01145 ;PATH_TASK id=1136 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X128.678 Y95.732 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;WIDTH:0.45 G1 F11054.338 G1 X126.71 Y93.763 E.09423 G1 X126.301 Y93.669 E.01422 G1 X126.216 Y93.654 E.0029 G1 X126.003 Y93.632 E.00725 G1 X128.478 Y96.107 E.11849 G1 X128.467 Y96.297 E.00644 G1 X128.459 Y96.372 E.00258 G1 X128.427 Y96.49 E.00411 G1 X128.39 Y96.594 E.00375 G1 X125.395 Y93.599 E.14335 G1 X124.822 Y93.602 E.01941 G1 X128.218 Y96.998 E.16258 G1 X128.177 Y97.072 E.00288 G1 X127.974 Y97.33 E.01109 G1 X124.289 Y93.644 E.1764 G1 X124.024 Y93.684 E.00907 G1 X123.907 Y93.712 E.00406 G1 X123.811 Y93.743 E.00341 G1 X127.672 Y97.604 E.18481 G1 X127.328 Y97.835 E.01404 G1 X123.38 Y93.887 E.189 G1 X123.362 Y93.894 E.00065 G1 X123.302 Y93.925 E.00229 G1 X123.012 Y94.095 E.01136 G1 X128.358 Y99.441 E.25589 G1 X128.352 Y99.798 E.01209 G1 X128.343 Y99.888 E.00303 G1 X128.309 Y99.968 E.00295 G1 X122.684 Y94.343 E.26924 G1 X122.443 Y94.611 E.0122 G1 X122.417 Y94.651 E.00163 G1 X128.061 Y100.295 E.27019 G1 X127.954 Y100.377 E.00455 G1 X127.95 Y100.379 E.00016 G1 X127.701 Y100.429 E.00859 G1 X127.617 Y100.427 E.00284 G1 X122.218 Y95.028 E.25847 G1 X122.16 Y95.159 E.00485 G1 X122.102 Y95.371 E.00746 G1 X122.09 Y95.476 E.00356 G1 X127.032 Y100.418 E.23656 G1 X126.446 Y100.408 E.01983 G1 X121.866 Y95.828 E.21924 ;PATH_TASK id=1137 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X121 Y91.564 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F11054.348 G1 X121 Y93.564 E.0677 G1 X121.992 Y94.557 E.04751 G3 X124.775 Y93.195 I2.635 J1.86 E.1094 G1 X123.853 Y92.273 E.04416 G3 X122.945 Y91.416 I.233 J-1.156 E.04451 G2 X121 Y89.419 I-46.342 J43.218 E.09437 G1 X121 Y85.274 E.1403 G1 X121.803 Y86.053 E.03785 G3 X123.493 Y83.623 I2.545 J-.033 E.10693 G1 X122.37 Y82.5 E.05376 G1 X126.515 Y82.5 E.1403 G1 X127.553 Y83.538 E.04972 G3 X129 Y84.24 I.262 J1.304 E.05846 G1 X129 Y83.957 E.00957 ;PATH_TASK id=1138 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X128.939 Y86.408 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.449999 G1 F11054.364 G1 X128.938 Y84.786 E.05489 G1 X128.831 Y84.707 E.00448 G1 X128.477 Y84.204 E.02083 G1 X128.151 Y83.987 E.01326 G1 X127.359 Y83.942 E.02684 G1 X127.028 Y84.018 E.01151 G1 X126.844 Y84.157 E.00779 G1 X126.787 Y84.255 E.00386 G1 X128.911 Y86.38 E.10169 ;PATH_TASK id=1139 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X128.554 Y85.478 F21000 ;WIDTH:0.431045 G1 F11594.222 G1 X128.554 Y84.958 E.01678 G1 X128.21 Y84.532 E.01769 G1 X127.994 Y84.371 E.0087 G1 X127.458 Y84.351 E.01729 G1 X127.9 Y84.793 E.02016 G1 X128.244 Y85.168 E.01644 G1 X128.526 Y85.45 E.01286 ;PATH_TASK id=1140 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X129.184 Y86.94 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;WIDTH:0.450001 G1 F11054.31 G1 X126.681 Y84.438 E.11978 G1 X126.627 Y84.73 E.01006 G1 X126.455 Y84.787 E.00613 G1 X128.747 Y87.08 E.10975 G1 X128.583 Y87.399 E.01217 G1 X128.564 Y87.472 E.00255 G1 X125.228 Y84.136 E.15968 G1 X125.039 Y84.043 E.00716 G1 X124.841 Y83.979 E.00704 G1 X124.425 Y83.909 E.01426 G1 X128.548 Y88.032 E.19736 G1 X128.544 Y88.074 E.00145 G1 X128.405 Y88.382 E.01141 G1 X128.363 Y88.422 E.00197 G1 X123.892 Y83.951 E.21404 G1 X123.712 Y83.978 E.00615 G1 X123.5 Y84.051 E.00759 G1 X123.445 Y84.08 E.0021 G1 X128.404 Y89.039 E.23738 G1 X128.528 Y89.412 E.01331 G1 X128.523 Y89.734 E.01091 G1 X122.948 Y84.159 E.26686 ;PATH_TASK id=1141 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X122.759 Y85.409 F21000 ;WIDTH:0.45 G1 F11054.338 G1 X124.605 Y87.255 E.08837 ;PATH_TASK id=1142 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X124.86 Y88.086 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X124.97 Y87.874 E.00806 G1 X125.039 Y87.326 E.0187 G1 X125.136 Y87.211 E.00512 G1 X122.654 Y84.728 E.11882 G1 X122.548 Y84.869 E.00597 G1 X122.301 Y85.455 E.02153 G1 X122.283 Y85.573 E.00404 G1 X122.357 Y85.582 E.00252 G1 X124.832 Y88.058 E.11849 ;PATH_TASK id=1143 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X126.473 Y89.123 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;WIDTH:0.449998 G1 F11054.392 G1 X127.63 Y90.28 E.05536 ;PATH_TASK id=1144 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X127.34 Y90.711 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X127.843 Y90.72 E.01704 G1 X128.133 Y90.644 E.01013 G1 X128.372 Y90.451 E.01042 G1 X126.535 Y88.609 E.08806 G1 X126.367 Y88.725 E.0069 G1 X125.484 Y88.71 E.02989 G1 X127.346 Y90.572 E.08915 G1 X127.342 Y90.671 E.00336 ;PATH_TASK id=1145 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X127.32 Y90.833 F21000 ;WIDTH:0.450005 G1 F11054.202 G1 X122.249 Y85.762 E.24278 G1 X122.22 Y85.933 E.00586 G1 X122.21 Y86.05 E.00399 G1 X122.211 Y86.09 E.00137 G1 X122.226 Y86.315 E.00761 G1 X126.796 Y90.885 E.21879 ;PATH_TASK id=1146 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X128.708 Y90.711 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F11054.348 G3 X127.866 Y91.127 I-.844 J-.647 E.03294 G1 X126.835 Y91.11 E.03489 G1 X129 Y93.275 E.10366 G1 X129 Y97.42 E.1403 G1 X128.652 Y97.055 E.01708 G2 X128.785 Y95.117 I-2.656 J-1.156 E.06707 ;PATH_TASK id=1147 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X127.41 Y94.104 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.569665 G1 F8543.042 G1 X127.643 Y94.31 E.01362 ;PATH_TASK id=1148 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.602354 G1 F8043.844 G1 X127.876 Y94.516 E.01446 G1 X127.998 Y94.648 E.00833 ;PATH_TASK id=1149 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X122.504 Y87.418 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;WIDTH:0.413487 G1 F12000 G1 X122.665 Y87.604 E.0076 ;PATH_TASK id=1150 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.453055 G1 F10972.005 G1 X122.827 Y87.791 E.00841 G1 X123.143 Y88.069 E.01436 ;PATH_TASK id=1151 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X124.432 Y91.038 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;WIDTH:0.511649 G1 F9600.43 G1 X124.458 Y90.758 E.01094 G1 X124.513 Y90.661 E.00437 ;PATH_TASK id=1152 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.498204 G1 F9883.951 G1 X124.318 Y90.446 E.01098 ;PATH_TASK id=1153 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.471313 G1 F10504.385 G1 X124.122 Y90.232 E.01033 ;PATH_TASK id=1154 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.440516 G1 F11318.039 G1 X123.652 Y89.741 E.02247 G1 X123.282 Y89.381 E.01708 G1 X123.21 Y89.447 E.00322 G1 X122.963 Y89.481 E.00826 G1 X122.985 Y89.69 E.00696 G1 X123.374 Y90.007 E.01659 G1 X123.796 Y90.483 E.02104 ;PATH_TASK id=1155 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.471313 G1 F10504.385 G1 X123.946 Y90.714 E.00982 ;PATH_TASK id=1156 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.499644 G1 F9852.788 G1 X124.096 Y90.946 E.01047 G1 X124.166 Y91.038 E.00438 G1 X124.392 Y91.038 E.00861 ;PATH_TASK id=1157 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X124.758 Y91.464 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X124.861 Y91.407 E.00401 G1 X124.886 Y90.852 E.0188 G1 X125.043 Y90.572 E.01089 G1 X123.328 Y88.856 E.08212 G1 X123.112 Y89.056 E.00994 G1 X122.656 Y89.131 E.01566 G1 X122.562 Y89.358 E.00832 G1 X122.569 Y89.752 E.01334 G1 X122.665 Y89.94 E.00714 G1 X123.081 Y90.274 E.01805 G1 X123.441 Y90.689 E.0186 G1 X123.802 Y91.3 E.02402 G1 X123.948 Y91.443 E.00691 G1 X124.256 Y91.476 E.0105 G1 X124.718 Y91.465 E.01563 ;PATH_TASK id=1158 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X124.695 Y91.883 F21000 ;WIDTH:0.448896 G1 F11084.403 G1 X124.908 Y91.842 E.00734 G1 X125.13 Y91.713 E.00866 G1 X125.265 Y91.549 E.00717 G1 X125.284 Y90.939 E.02061 G1 X125.443 Y90.738 E.00866 G1 X125.588 Y90.682 E.00524 G1 X125.731 Y90.684 E.00485 G1 X123.495 Y88.448 E.10676 G1 X123.173 Y88.096 E.01611 G1 X123.228 Y88.287 E.00671 G1 X123.157 Y88.527 E.00848 G1 X122.98 Y88.666 E.00759 G1 X122.608 Y88.695 E.01261 G1 X122.392 Y88.811 E.00826 G1 X122.237 Y89.001 E.00827 G1 X122.154 Y89.388 E.01338 G1 X122.174 Y89.849 E.01556 G1 X122.222 Y90.047 E.00689 G1 X122.54 Y90.369 E.01529 G1 X122.78 Y90.548 E.01009 G1 X123.089 Y90.894 E.01564 G1 X123.443 Y91.504 E.02382 G1 X123.629 Y91.737 E.01005 G1 X123.862 Y91.857 E.00884 G1 X124.655 Y91.882 E.0268 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 M106 S252 ;LAYER_CHANGE ;Z:1.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;1.2 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;1.2 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1159 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 M486 S0 G1 Z1.8 F720 G1 X129.346 Y137.846 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F9213 G1 X120.654 Y137.846 E.29424 G1 X120.654 Y82.154 E1.88514 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y137.806 E1.88378 ;PATH_TASK id=1160 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 M204 T3000 G1 X129.389 Y137.806 F21000 G1 X129.389 Y137.889 G1 X129.775 Y138.275 M204 P3000 ;TYPE:Outer wall G1 F9213 G1 X120.225 Y138.275 E.32326 G1 X120.225 Y81.725 E1.91415 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y138.235 E1.91279 ;PATH_TASK id=1161 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X129.389 Y137.889 Z1.8 F21000 G1 X129.389 Y136.516 G1 X128.888 Y136.516 G1 Z1.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.553601 G1 F8811.764 G1 X128.016 Y137.388 E.05235 G1 X128.888 Y137.388 E.03702 G1 X128.888 Y136.556 E.03532 ;PATH_TASK id=1162 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 X129.184 Y135.857 F21000 ;WIDTH:0.452918 G1 F9213 G1 X127.54 Y137.5 E.07926 G1 X126.96 Y137.5 E.01977 G1 X129 Y135.46 E.09838 G1 X129 Y134.88 E.01977 G1 X126.38 Y137.5 E.12634 G1 X125.8 Y137.5 E.01977 G1 X129 Y134.3 E.15429 G1 X129 Y133.72 E.01977 G1 X125.22 Y137.5 E.18225 G1 X124.641 Y137.5 E.01977 G1 X129 Y133.141 E.2102 G1 X129 Y132.561 E.01977 G1 X124.061 Y137.5 E.23816 G1 X123.481 Y137.5 E.01977 G1 X129 Y131.981 E.26611 G1 X129 Y131.401 E.01977 G1 X122.901 Y137.5 E.29407 G1 X122.321 Y137.5 E.01977 G1 X129 Y130.821 E.32202 G1 X129 Y130.241 E.01977 G1 X121.741 Y137.5 E.34998 G1 X121.162 Y137.5 E.01977 G1 X129 Y129.662 E.37793 G1 X129 Y129.082 E.01977 G1 X121 Y137.083 E.38575 G1 X121 Y136.503 E.01977 G1 X129 Y128.502 E.38575 G1 X129 Y127.922 E.01977 G1 X121 Y135.923 E.38575 G1 X121 Y135.343 E.01977 G1 X129 Y127.342 E.38575 G1 X129 Y126.762 E.01977 G1 X121 Y134.763 E.38575 G1 X121 Y134.184 E.01977 G1 X129 Y126.183 E.38575 G1 X129 Y125.603 E.01977 G1 X121 Y133.604 E.38575 G1 X121 Y133.024 E.01977 G1 X128.83 Y125.193 E.37753 G1 X128.25 Y125.193 E.01977 G1 X121 Y132.444 E.34958 G1 X121 Y131.864 E.01977 G1 X127.67 Y125.193 E.32162 G1 X127.219 Y125.193 E.0154 G1 X127.182 Y125.102 E.00335 G1 X121 Y131.284 E.29807 G1 X121 Y130.705 E.01977 M73 P87 R5 G1 X127.155 Y124.549 E.29677 G1 X127.161 Y124.211 E.01154 G1 X127.149 Y124.198 E.00059 G1 X126.93 Y124.194 E.00746 G1 X121 Y130.125 E.28592 G1 X121 Y129.545 E.01977 G1 X126.36 Y124.185 E.25843 G1 X126.183 Y124.182 E.00601 G1 X125.987 Y123.978 E.00965 G1 X121 Y128.965 E.24044 G1 X121 Y128.385 E.01977 G1 X125.22 Y124.165 E.20346 G1 X124.649 Y124.156 E.01944 G1 X121 Y127.806 E.17597 G1 X121 Y127.226 E.01977 G1 X124.079 Y124.146 E.14848 G1 X123.509 Y124.136 E.01944 G1 X121 Y126.646 E.121 G1 X121 Y126.066 E.01977 G1 X122.055 Y125.01 E.05091 ;PATH_TASK id=1163 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 X122.362 Y124.704 F21000 G1 F9213 G1 X122.939 Y124.127 E.02784 G1 X122.369 Y124.117 E.01943 G1 X122.171 Y124.315 E.00958 ;PATH_TASK id=1164 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X125.336 Y124.04 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 ;WIDTH:0.38292 G1 F9213 G1 X125.495 Y123.866 E.00666 ;PATH_TASK id=1165 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.404436 G1 X125.543 Y123.754 E.00368 ;PATH_TASK id=1166 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.447467 G1 X125.591 Y123.641 E.00412 ;PATH_TASK id=1167 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.490499 G1 X125.639 Y123.528 E.00456 ;PATH_TASK id=1168 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 X125.759 Y123.491 E.0047 ;PATH_TASK id=1169 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.447467 G1 X125.88 Y123.453 E.00425 ;PATH_TASK id=1170 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.41391 G1 X126.001 Y123.416 E.0039 G1 X126.038 Y123.448 E.00152 ;PATH_TASK id=1171 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X128.593 Y123.883 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F9213 G1 X128.593 Y121.883 E.0677 G1 X123.855 Y117.146 E.2268 G1 X123.128 Y116.886 E.02616 G1 X122.617 Y116.514 E.02137 G1 X122.252 Y115.991 E.02159 G1 X122.093 Y115.383 E.02129 G1 X121 Y114.29 E.05233 G1 X121 Y110.145 E.1403 G1 X124.588 Y113.733 E.17176 G1 X125.163 Y113.45 E.02169 G1 X125.879 Y113.37 E.0244 G1 X126.567 Y113.505 E.02375 G1 X127.194 Y113.867 E.0245 G1 X127.622 Y114.419 E.02365 G1 X127.8 Y115.093 E.02359 G1 X127.717 Y115.854 E.02591 G1 X127.36 Y116.505 E.02514 G1 X128.593 Y117.738 E.05904 G1 X128.593 Y117.158 E.01964 G1 X129 Y117.109 E.01388 G1 X129 Y114 E.10522 G1 X121 Y106 E.383 G1 X121 Y101.855 E.1403 G1 X123.136 Y103.991 E.10229 G1 X122.813 Y104.218 E.01338 G1 X122.549 Y104.518 E.01353 G1 X122.37 Y104.862 E.0131 G1 X122.266 Y105.277 E.01449 G1 X122.25 Y105.75 E.01601 G1 X122.327 Y106.189 E.01512 G1 X122.489 Y106.559 E.01365 G1 X122.734 Y106.872 E.01346 G1 X123.12 Y107.156 E.01624 G1 X123.573 Y107.304 E.01612 G1 X124.271 Y107.264 E.02368 G1 X124.555 Y107.137 E.01052 G1 X124.808 Y106.935 E.01096 G1 X125.147 Y107.275 E.01624 G1 X125.581 Y107.488 E.01635 G1 X126.097 Y107.565 E.01768 G1 X126.643 Y107.498 E.01862 G1 X129 Y109.855 E.11284 G1 X129 Y105.71 E.1403 G1 X124.524 Y101.234 E.21427 G1 X123.983 Y101.225 E.01834 G3 X123.493 Y100.809 I.094 J-.606 E.0229 G1 X123.084 Y100.207 E.02464 G1 X122.574 Y99.754 E.02308 G3 X122.356 Y99.066 I.301 J-.474 E.02653 G1 X121 Y97.71 E.06492 G1 X121 Y93.564 E.1403 G1 X122.56 Y95.125 E.07472 G1 X122.976 Y94.561 E.02374 M73 P87 R4 G1 X123.617 Y94.187 E.02512 G1 X124.444 Y93.987 E.02877 G1 X125.541 Y93.961 E.03715 G1 X121 Y89.419 E.21739 G1 X121 Y85.274 E.1403 G1 X122.731 Y87.006 E.08288 G1 X123.091 Y87.549 E.02207 G1 X123.633 Y87.908 E.022 G1 X124.792 Y89.066 E.05546 G1 X127.914 Y89.12 E.10572 G1 X128.161 Y89.375 E.012 G1 X128.148 Y90.106 E.02475 G1 X127.893 Y90.352 E.012 G1 X126.046 Y90.321 E.06255 G1 X129 Y93.275 E.14144 G1 X129 Y97.42 E.1403 G1 X128.055 Y96.475 E.04526 G1 X127.715 Y97.086 E.02368 G1 X127.142 Y97.512 E.02416 G1 X126.306 Y97.765 E.02956 G1 X125.267 Y97.832 E.03524 G1 X126.238 Y98.803 E.04645 G1 X127.749 Y98.828 E.05117 G1 X127.996 Y99.083 E.012 G1 X127.983 Y99.814 E.02475 G1 X127.728 Y100.061 E.012 G1 X127.492 Y100.057 E.008 G1 X129 Y101.565 E.07221 G1 X129 Y103.565 E.0677 ;PATH_TASK id=1172 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X125.69 Y107.081 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.452583 G1 F9213 G1 X126.123 Y107.143 E.01492 G1 X126.542 Y107.086 E.0144 G1 X126.914 Y106.922 E.01385 G1 X127.26 Y106.603 E.01602 G1 X127.441 Y106.297 E.0121 ;PATH_TASK id=1173 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.419553 G1 X127.563 Y105.858 E.01428 G1 X127.574 Y105.427 E.01351 G1 X127.455 Y104.923 E.01621 G1 X127.166 Y104.501 E.01601 G1 X126.907 Y104.286 E.01054 ;PATH_TASK id=1174 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.45539 G1 X126.538 Y104.122 E.01387 G1 X126.035 Y104.08 E.01729 G1 X125.611 Y104.184 E.01499 G1 X125.357 Y104.33 E.01002 ;PATH_TASK id=1175 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.458771 G1 X125.159 Y104.513 E.00935 ;PATH_TASK id=1176 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.493408 G1 X124.961 Y104.697 E.01013 G1 X124.796 Y104.706 E.0062 ;PATH_TASK id=1177 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.493089 G1 X124.582 Y104.537 E.0102 ;PATH_TASK id=1178 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.459042 G1 X124.368 Y104.368 E.00943 G1 X123.994 Y104.248 E.01358 G1 X123.62 Y104.265 E.01298 G1 X123.287 Y104.384 E.01221 G1 X122.982 Y104.631 E.01358 ;PATH_TASK id=1179 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.422567 G1 X122.766 Y104.95 E.01216 G1 X122.644 Y105.423 E.01545 G1 X122.666 Y105.908 E.0153 G1 X122.824 Y106.321 E.01396 G1 X123.007 Y106.562 E.00956 G1 X123.374 Y106.81 E.01399 ;PATH_TASK id=1180 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.458042 G1 X123.672 Y106.89 E.01064 G1 X124.061 Y106.882 E.01344 G1 X124.411 Y106.73 E.01316 ;PATH_TASK id=1181 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.453377 G1 X124.585 Y106.605 E.00733 ;PATH_TASK id=1182 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.479333 G1 X124.76 Y106.479 E.0078 G1 X124.927 Y106.494 E.00607 G1 X125.312 Y106.877 E.01974 G1 X125.655 Y107.062 E.01411 ;PATH_TASK id=1183 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 X125.078 Y106.074 F21000 ;WIDTH:0.449728 G1 F9213 G1 X125.094 Y105.213 E.02913 ;PATH_TASK id=1184 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.486637 G1 X125.093 Y105.163 E.00186 ;PATH_TASK id=1185 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.526291 G1 X125.092 Y105.112 E.00203 ;PATH_TASK id=1186 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.529228 G1 X125.268 Y104.952 E.00961 ;PATH_TASK id=1187 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.495447 G1 X125.443 Y104.792 E.00894 ;PATH_TASK id=1188 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.452326 G1 X125.619 Y104.632 E.00809 G1 X125.825 Y104.542 E.00765 G1 X126.177 Y104.49 E.01211 G1 X126.571 Y104.569 E.01368 G1 X126.924 Y104.806 E.01447 ;PATH_TASK id=1189 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.41163 G1 X127.147 Y105.157 E.01275 G1 X127.224 Y105.583 E.01327 G1 X127.152 Y106.026 E.01376 G1 X126.922 Y106.406 E.01362 ;PATH_TASK id=1190 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.454437 G1 X126.576 Y106.637 E.01421 G1 X126.108 Y106.724 E.01629 G1 X125.68 Y106.631 E.01499 ;PATH_TASK id=1191 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.430892 G1 X125.34 Y106.373 E.01378 ;PATH_TASK id=1192 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.431025 G1 X125.262 Y106.283 E.00384 ;PATH_TASK id=1193 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.46821 G1 X125.183 Y106.194 E.00421 ;PATH_TASK id=1194 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.486803 G1 X125.104 Y106.104 E.0044 ;PATH_TASK id=1195 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 X124.166 Y106.415 F21000 ;WIDTH:0.448435 G1 F9213 G1 X123.847 Y106.485 E.01103 G1 X123.474 Y106.411 E.01282 G1 X123.154 Y106.13 E.01434 ;PATH_TASK id=1196 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.410669 G1 X123.006 Y105.771 E.01187 G1 X123.016 Y105.345 E.01304 G1 X123.181 Y104.993 E.0119 ;PATH_TASK id=1197 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.449441 G1 X123.503 Y104.732 E.01402 G1 X123.815 Y104.66 E.01082 G1 X124.167 Y104.714 E.01203 ;PATH_TASK id=1198 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.463725 G1 X124.383 Y104.883 E.0096 ;PATH_TASK id=1199 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.493089 G1 X124.6 Y105.051 E.01027 ;PATH_TASK id=1200 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.529086 G1 X124.653 Y105.102 E.00297 ;PATH_TASK id=1201 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.531761 G1 F9205.453 G1 X124.665 Y105.178 E.0031 ;PATH_TASK id=1202 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.494482 G1 F9213 G1 X124.678 Y105.253 E.00286 ;PATH_TASK id=1203 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.438787 G1 X124.691 Y105.328 E.00251 G1 X124.695 Y105.77 E.01454 ;PATH_TASK id=1204 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.4491 G1 X124.643 Y105.946 E.00622 ;PATH_TASK id=1205 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.489274 G1 X124.59 Y106.123 E.00683 G1 X124.199 Y106.392 E.01764 ;PATH_TASK id=1206 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X124.335 Y100.824 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 ;WIDTH:0.449493 G1 F9213 G1 X124.215 Y100.526 E.01087 G1 X123.953 Y100.068 E.01781 G1 X123.95 Y99.859 E.00707 G1 X124.043 Y99.697 E.00633 G1 X124.224 Y99.591 E.00706 G1 X127.37 Y99.645 E.10637 G1 X127.576 Y99.63 E.007 G1 X127.583 Y99.235 E.01335 G1 X124.231 Y99.178 E.11335 G2 X122.774 Y99.151 I-3.678 J155.349 E.04926 G1 X122.765 Y99.397 E.00831 G1 X122.946 Y99.515 E.00731 G1 X123.365 Y99.912 E.01951 G1 X123.665 Y100.328 E.01734 G1 X123.913 Y100.77 E.01713 G1 X123.976 Y100.831 E.00296 G1 X124.295 Y100.824 E.0108 ;PATH_TASK id=1207 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 X123.656 Y99.536 F21000 ;WIDTH:0.468822 G1 F9213 G1 X123.603 Y99.536 E.00189 G1 X123.576 Y99.582 E.00189 G1 X123.603 Y99.628 E.00189 G1 X123.656 Y99.628 E.00189 G1 X123.662 Y99.617 E.00047 ;PATH_TASK id=1208 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X125.526 Y97.417 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 ;WIDTH:0.444159 G1 F9213 G1 X126.094 Y97.379 E.01897 G1 X126.772 Y97.221 E.02324 G1 X127.016 Y97.118 E.00881 G1 X127.39 Y96.836 E.01563 G1 X127.617 Y96.5 E.01354 ;PATH_TASK id=1209 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.430307 G1 X127.72 Y96.175 E.01097 G1 X127.737 Y95.759 E.01341 G1 X127.615 Y95.302 E.01525 G1 X127.332 Y94.94 E.01479 G1 X127.041 Y94.723 E.0117 G1 X126.6 Y94.535 E.01544 G1 X126.106 Y94.427 E.01629 ;PATH_TASK id=1210 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.453893 G1 X125.576 Y94.379 E.01818 G1 X124.91 Y94.373 E.02275 G1 X124.406 Y94.408 E.01729 G1 X123.856 Y94.537 E.01928 G1 X123.372 Y94.776 E.01845 G1 X123.133 Y94.979 E.01071 ;PATH_TASK id=1211 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.419828 G1 X122.914 Y95.307 E.01236 G1 X122.809 Y95.741 E.014 G1 X122.827 Y96.159 E.01309 G1 X122.964 Y96.545 E.01284 G1 X123.222 Y96.861 E.0128 G1 X123.671 Y97.144 E.01661 ;PATH_TASK id=1212 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.452498 G1 X124.287 Y97.328 E.02192 G1 X124.911 Y97.404 E.02139 G1 X125.486 Y97.416 E.0196 ;PATH_TASK id=1213 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 X124.956 Y96.986 F21000 ;WIDTH:0.448579 G1 F9213 G1 X124.41 Y96.931 E.01854 G1 X123.852 Y96.788 E.01942 G1 X123.45 Y96.554 E.01568 ;PATH_TASK id=1214 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.418781 G1 X123.213 Y96.206 E.01316 G1 X123.162 Y95.788 E.01317 G1 X123.279 Y95.416 E.01218 G1 X123.574 Y95.103 E.01344 G1 X124.034 Y94.901 E.01572 ;PATH_TASK id=1215 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.453526 G1 X124.516 Y94.815 E.0167 G1 X125.535 Y94.797 E.03481 G1 X126.072 Y94.842 E.01839 G1 X126.633 Y94.97 E.01965 G1 X127.068 Y95.219 E.01711 ;PATH_TASK id=1216 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.416898 G1 X127.322 Y95.569 E.01344 G1 X127.387 Y95.945 E.01188 G1 X127.295 Y96.324 E.01211 G1 X127.028 Y96.646 E.01303 G1 X126.662 Y96.843 E.0129 ;PATH_TASK id=1217 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.450708 G1 X126.169 Y96.952 E.01714 G1 X125.625 Y96.993 E.01848 G1 X124.996 Y96.986 E.02133 ;PATH_TASK id=1218 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X124.5 Y91.115 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 ;WIDTH:0.449883 G1 F9213 G1 X124.371 Y90.8 E.01152 G1 X124.118 Y90.36 E.01718 G1 X124.116 Y90.151 E.00709 G1 X124.208 Y89.988 E.00633 G1 X124.389 Y89.883 E.00707 G1 X127.731 Y89.939 E.1131 G1 X127.748 Y89.527 E.01397 G1 X124.396 Y89.47 E.11346 G1 X122.939 Y89.442 E.04931 G1 X122.931 Y89.688 E.00832 G1 X123.111 Y89.807 E.00731 G1 X123.521 Y90.191 E.01902 G1 X123.817 Y90.597 E.01699 G1 X124.078 Y91.061 E.01803 G1 X124.141 Y91.122 E.00297 G1 X124.46 Y91.116 E.01081 ;PATH_TASK id=1219 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 X123.821 Y89.827 F21000 ;WIDTH:0.468824 G1 F9213 G1 X123.768 Y89.827 E.00189 G1 X123.741 Y89.873 E.00189 G1 X123.768 Y89.919 E.00189 G1 X123.821 Y89.919 E.00189 G1 X123.828 Y89.908 E.00047 ;PATH_TASK id=1220 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X126.32 Y87.413 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F9213 G1 X126.96 Y87.952 E.02831 G1 X127.61 Y88.222 E.02384 G2 X128.021 Y88.151 I.174 J-.219 E.01592 G1 X129 Y89.13 E.04689 G1 X129 Y84.985 E.1403 G1 X126.515 Y82.5 E.11899 G1 X122.37 Y82.5 E.1403 G1 X124.14 Y84.27 E.08475 G1 X124.593 Y84.294 E.01534 G1 X125.049 Y84.441 E.01622 G1 X125.46 Y84.696 E.01637 G1 X125.89 Y85.085 E.01963 ;PATH_TASK id=1221 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X127.78 Y87.818 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.447011 G1 F9213 G1 X127.801 Y86.665 E.03875 G1 X127.804 Y86.595 E.00235 G1 X127.836 Y84.747 E.06211 G1 X127.435 Y84.715 E.0135 G1 X127.403 Y86.588 E.06295 G1 X127.274 Y86.775 E.00763 G1 X127.057 Y86.857 E.00781 G1 X126.864 Y86.824 E.00658 G3 X125.84 Y85.623 I352.169 J-301.395 E.05304 G1 X125.425 Y85.202 E.01985 G1 X125.034 Y84.908 E.01643 G1 X124.641 Y84.737 E.0144 G1 X124.236 Y84.687 E.01373 G1 X123.87 Y84.754 E.01248 G1 X123.533 Y84.926 E.01274 G1 X123.353 Y85.074 E.00781 G1 X123.129 Y85.395 E.01315 ;PATH_TASK id=1222 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.434727 G1 X122.997 Y85.8 E.01389 G1 X122.968 Y86.254 E.0148 G1 X123.05 Y86.723 E.01553 G1 X123.269 Y87.132 E.0151 G1 X123.611 Y87.427 E.01474 G1 X123.987 Y87.581 E.01322 G1 X124.216 Y87.63 E.00763 G1 X124.247 Y87.213 E.01365 G1 X123.829 Y87.092 E.01417 G1 X123.525 Y86.83 E.01306 ;PATH_TASK id=1223 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.416813 G1 X123.359 Y86.464 E.01252 G1 X123.332 Y85.998 E.01451 G1 X123.466 Y85.567 E.01404 G1 X123.737 Y85.271 E.01245 ;PATH_TASK id=1224 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.446433 G1 X124.111 Y85.115 E.01361 G1 X124.532 Y85.141 E.01414 G1 X124.968 Y85.357 E.01633 G1 X125.365 Y85.698 E.01755 G1 X125.733 Y86.099 E.01827 G1 X126.335 Y86.827 E.03168 G1 X126.691 Y87.215 E.01767 G1 X127.104 Y87.553 E.01792 G1 X127.515 Y87.768 E.01554 G1 X127.741 Y87.81 E.00773 ;PATH_TASK id=1225 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 X127.389 Y87.154 F21000 ;WIDTH:0.496498 G1 F9213 G1 X127.332 Y87.154 E.00214 G1 X127.304 Y87.203 E.00214 G1 X127.332 Y87.252 E.00214 G1 X127.389 Y87.252 E.00214 G1 X127.397 Y87.237 E.00063 ;PATH_TASK id=1226 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X125.019 Y115.25 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F9213 G1 X125.113 Y115.622 E.01298 G1 X125.425 Y115.894 E.01404 G1 X125.888 Y115.96 E.0158 G1 X126.35 Y115.818 E.01638 G1 X126.527 Y115.672 E.00776 G1 X125.506 Y114.651 E.04886 G1 X126.038 Y114.631 E.01803 G1 X126.366 Y114.743 E.01172 G1 X126.59 Y114.954 E.01043 G1 X126.68 Y115.216 E.00937 G1 X126.632 Y115.499 E.00971 ;PATH_TASK id=1227 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X124.8 Y116.395 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.461022 G1 F9213 G1 X124.748 Y116.395 E.00182 G1 X124.722 Y116.44 E.00182 G1 X124.748 Y116.485 E.00182 G1 X124.8 Y116.485 E.00182 G1 X124.806 Y116.475 E.00043 ;PATH_TASK id=1228 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X125.356 Y114.269 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 ;WIDTH:0.445994 G1 F9213 G1 X125.947 Y114.214 E.01989 G1 X126.449 Y114.334 E.0173 G1 X126.827 Y114.625 E.016 ;PATH_TASK id=1229 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.412889 G1 X127.027 Y115.001 E.01308 G1 X127.052 Y115.392 E.01208 G1 X126.922 Y115.779 E.01255 G1 X126.652 Y116.092 E.01273 ;PATH_TASK id=1230 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.457094 G1 X126.246 Y116.304 E.01575 G1 X125.736 Y116.383 E.01776 G1 X125.273 Y116.268 E.01645 G1 X124.922 Y116.025 E.01471 ;PATH_TASK id=1231 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.431239 G1 X124.817 Y115.836 E.00696 ;PATH_TASK id=1232 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.399543 G1 X124.713 Y115.648 E.00639 G1 X124.633 Y115.246 E.01215 ;PATH_TASK id=1233 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.432972 G1 X124.719 Y114.823 E.014 G1 X124.972 Y114.486 E.01366 G1 X125.321 Y114.289 E.01301 ;PATH_TASK id=1234 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 X125.637 Y113.798 F21000 ;WIDTH:0.454662 G1 F9213 G1 X125.19 Y113.882 E.01558 G1 X124.835 Y114.073 E.01381 G1 X124.522 Y114.379 E.01496 G1 X124.333 Y114.727 E.01358 G1 X124.263 Y115.125 E.01383 ;PATH_TASK id=1235 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.430284 G1 X124.308 Y115.536 E.01333 G1 X124.51 Y116.083 E.01879 G1 X124.355 Y116.315 E.00898 G1 X124.188 Y116.394 E.00596 G1 X123.572 Y116.216 E.02065 G1 X123.149 Y115.93 E.01644 G1 X122.886 Y115.542 E.01511 ;PATH_TASK id=1236 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.414899 G1 X122.828 Y115.134 E.01273 G1 X122.929 Y114.74 E.01259 G1 X123.19 Y114.431 E.0125 ;PATH_TASK id=1237 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.45031 G1 X123.585 Y114.249 E.01475 G1 X123.558 Y113.855 E.01338 G1 X123.27 Y113.934 E.0101 G1 X122.937 Y114.121 E.01294 G1 X122.684 Y114.405 E.01289 G1 X122.523 Y114.761 E.01324 ;PATH_TASK id=1238 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.422668 G1 X122.476 Y115.265 E.01596 G1 X122.57 Y115.722 E.01473 G1 X122.731 Y116.024 E.0108 G1 X123.033 Y116.341 E.01385 G1 X123.446 Y116.589 E.0152 G1 X123.94 Y116.749 E.01639 ;PATH_TASK id=1239 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.453815 G1 X124.597 Y116.84 E.02267 G1 X125.1 Y116.864 E.01721 G1 X125.72 Y116.817 E.02123 G1 X126.326 Y116.707 E.02106 G1 X126.779 Y116.491 E.01713 G1 X127.116 Y116.163 E.01608 ;PATH_TASK id=1240 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.420334 G1 X127.316 Y115.81 E.01272 G1 X127.412 Y115.318 E.01575 G1 X127.392 Y114.973 E.01085 G1 X127.234 Y114.544 E.01431 G1 X126.996 Y114.236 E.01224 G1 X126.594 Y113.965 E.01521 ;PATH_TASK id=1241 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.444562 G1 X126.085 Y113.819 E.0177 G1 X125.677 Y113.8 E.01362 ;PATH_TASK id=1242 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X121 Y117.825 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F9213 G1 X121 Y118.136 E.01056 G1 X121.407 Y117.729 E.01949 G1 X121.407 Y118.842 E.03765 G1 X125.655 Y123.09 E.20337 G1 X125.459 Y123.087 E.00665 G1 X125.204 Y123.333 E.012 G1 X125.197 Y123.758 E.01437 G1 X122.167 Y123.747 E.10257 G1 X121.407 Y122.987 E.03638 G1 X121.407 Y120.987 E.0677 ;PATH_TASK id=1243 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X121.03 Y118.638 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.388958 G1 F9213 G1 X121.03 Y124.99 E.18275 ;PATH_TASK id=1244 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.409506 G1 X121.047 Y125.046 E.00178 ;PATH_TASK id=1245 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.4506 G1 X121.064 Y125.102 E.00198 ;PATH_TASK id=1246 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.471148 G1 X121.08 Y125.158 E.00208 ;PATH_TASK id=1247 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X128.97 Y124.961 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 ;WIDTH:0.388958 G1 F9213 G1 X128.97 Y117.532 E.21375 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:1.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;1.4 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;1.4 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1248 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 M486 S0 G1 Z2 F720 G1 X129.346 Y137.846 Z2 F21000 G1 Z1.4 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F9212 G1 X120.654 Y137.846 E.29424 G1 X120.654 Y82.154 E1.88514 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y137.806 E1.88378 ;PATH_TASK id=1249 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 M204 T3000 G1 X129.389 Y137.806 F21000 G1 X129.389 Y137.889 G1 X129.775 Y138.275 M204 P3000 ;TYPE:Outer wall G1 F9212 G1 X120.225 Y138.275 E.32326 G1 X120.225 Y81.725 E1.91415 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y138.235 E1.91279 ;PATH_TASK id=1250 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z2 F720 G1 X129.389 Y137.889 Z2 F21000 G1 X128.96 Y134.411 G1 X128.408 Y134.411 G1 X128.408 Y134.186 G1 Z1.4 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.426852 G1 F6000 G1 X129.185 Y134.962 E.03507 ;PATH_TASK id=1251 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X129.185 Y135.505 F21000 G1 F6000 G1 X127.865 Y134.186 E.05958 ;PATH_TASK id=1252 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X127.322 Y134.186 F21000 G1 F6000 G1 X129.185 Y136.048 E.0841 ;PATH_TASK id=1253 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X129.185 Y136.591 F21000 G1 F6000 G1 X126.779 Y134.186 E.10861 ;PATH_TASK id=1254 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X126.236 Y134.186 F21000 G1 F6000 G1 X129.185 Y137.134 E.13312 ;PATH_TASK id=1255 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X129.185 Y137.677 F21000 G1 F6000 G1 X125.694 Y134.186 E.15764 ;PATH_TASK id=1256 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X125.151 Y134.186 F21000 G1 F6000 G1 X128.65 Y137.685 E.15799 ;PATH_TASK id=1257 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X128.107 Y137.685 F21000 G1 F6000 G1 X124.608 Y134.186 E.15799 ;PATH_TASK id=1258 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X124.065 Y134.186 F21000 G1 F6000 G1 X127.564 Y137.685 E.15799 ;PATH_TASK id=1259 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X127.021 Y137.685 F21000 G1 F6000 G1 X123.522 Y134.186 E.15799 ;PATH_TASK id=1260 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X122.979 Y134.186 F21000 G1 F6000 G1 X126.478 Y137.685 E.15799 ;PATH_TASK id=1261 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X125.935 Y137.685 F21000 G1 F6000 G1 X122.436 Y134.186 E.15799 ;PATH_TASK id=1262 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X121.893 Y134.186 F21000 G1 F6000 G1 X125.392 Y137.685 E.15799 ;PATH_TASK id=1263 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X124.849 Y137.685 F21000 G1 F6000 G1 X121.35 Y134.186 E.15799 ;PATH_TASK id=1264 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X120.815 Y134.194 F21000 G1 F6000 G1 X124.306 Y137.685 E.15763 ;PATH_TASK id=1265 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X123.763 Y137.685 F21000 G1 F6000 G1 X120.815 Y134.737 E.13312 ;PATH_TASK id=1266 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X120.815 Y135.28 F21000 G1 F6000 G1 X123.22 Y137.685 E.10861 ;PATH_TASK id=1267 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X122.677 Y137.685 F21000 G1 F6000 G1 X120.815 Y135.823 E.08409 ;PATH_TASK id=1268 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X120.815 Y136.365 F21000 G1 F6000 G1 X122.135 Y137.685 E.05958 ;PATH_TASK id=1269 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X121.592 Y137.685 F21000 G1 F6000 G1 X120.815 Y136.908 E.03507 ;PATH_TASK id=1270 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2 F720 G1 X121.122 Y133.881 Z2 F21000 G1 Z1.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.513006 G1 F9212 G1 X121.063 Y133.881 E.0023 G1 X121.033 Y133.932 E.0023 G1 X121.063 Y133.983 E.0023 G1 X121.122 Y133.983 E.0023 G1 X121.131 Y133.966 E.00073 ;PATH_TASK id=1271 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2 F720 G1 X125.771 Y124.738 Z2 F21000 G1 Z1.4 F720 G1 E.7 F1500 ;WIDTH:0.466162 G1 F9212 G1 X125.83 Y124.796 E.0029 ;PATH_TASK id=1272 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X125.858 Y124.824 F21000 ;WIDTH:0.451044 G1 F9212 G1 X126.212 Y125.202 E.01759 ;PATH_TASK id=1273 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 ;WIDTH:0.406522 G1 X126.567 Y125.58 E.01567 G1 X126.62 Y125.598 E.00169 G1 X126.67 Y125.572 E.00172 G1 X126.373 Y124.835 E.02403 ;PATH_TASK id=1274 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 ;WIDTH:0.417271 G1 X126.135 Y124.83 E.00739 ;PATH_TASK id=1275 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 ;WIDTH:0.434157 G1 X125.898 Y124.825 E.00772 ;PATH_TASK id=1276 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2 F720 G1 X128.131 Y125.642 Z2 F21000 G1 Z1.4 F720 G1 E.7 F1500 M204 P1500 ;TYPE:Internal Bridge ;WIDTH:0.4 ;HEIGHT:0.4 G1 F4500 M106 S255 G1 X128.979 Y124.795 E.06264 G1 X128.979 Y124.158 E.03325 G1 X127.697 Y125.44 E.09469 G1 X127.061 Y125.44 E.03325 G1 X128.979 Y123.522 E.14171 G1 X128.979 Y122.885 E.03325 G1 X126.872 Y124.993 E.15569 G1 X126.689 Y124.539 E.02554 G1 X128.979 Y122.249 E.16923 G1 X128.979 Y121.613 E.03325 G1 X126.164 Y124.428 E.20801 G1 X126.077 Y124.426 E.00452 G1 X125.808 Y124.148 E.02026 G1 X128.979 Y120.976 E.23432 G1 X128.979 Y120.34 E.03325 G1 X124.912 Y124.407 E.30047 G1 X124.286 Y124.396 E.0327 G1 X128.979 Y119.703 E.34671 G1 X128.979 Y119.067 E.03325 G1 X123.462 Y124.584 E.40765 ;PATH_TASK id=1277 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X122.98 Y125.066 F21000 G1 F4500 G1 X122.606 Y125.44 E.02763 G1 X121.97 Y125.44 E.03325 G1 X128.979 Y118.431 E.51788 G1 X128.979 Y117.794 E.03325 G1 X121.333 Y125.44 E.5649 G1 X121.028 Y125.44 E.01594 G1 X121.021 Y125.447 E.00054 G1 X121.021 Y125.116 E.01731 G1 X128.62 Y117.517 E.56143 G1 X128.301 Y117.199 E.02351 G1 X121.021 Y124.479 E.53792 G1 X121.021 Y123.843 E.03325 G1 X127.983 Y116.881 E.51441 G1 X127.968 Y116.865 E.00114 G1 X125.895 Y118.938 E.15313 G1 X125.593 Y118.635 E.02237 G1 X121.021 Y123.207 E.33777 G1 X121.021 Y122.57 E.03325 G1 X125.274 Y118.317 E.31426 G1 X124.956 Y117.999 E.02351 G1 X121.021 Y121.934 E.29075 G1 X121.021 Y121.297 E.03325 G1 X124.638 Y117.681 E.26724 G1 X124.32 Y117.362 E.02351 G1 X121.021 Y120.661 E.24373 G1 X121.021 Y120.025 E.03325 G1 X123.989 Y117.056 E.21932 G1 X123.576 Y116.926 E.02262 G1 X123.515 Y116.895 E.00362 G1 X121.021 Y119.388 E.18424 G1 X121.021 Y118.752 E.03325 G1 X123.242 Y116.531 E.16411 ;PATH_TASK id=1278 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2 F720 G1 X121 Y116.29 Z2 F21000 G1 Z1.4 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 ;HEIGHT:0.2 G1 F9212 M106 S252 G1 X121 Y114.29 E.0677 G1 X122.923 Y116.213 E.09207 G1 X122.987 Y116.149 E.00307 G2 X124.254 Y116.69 I2.3 J-3.629 E.04684 G1 X125.895 Y118.332 E.07857 G1 X127.541 Y116.686 E.07878 G1 X121 Y110.145 E.31314 G1 X121 Y106 E.1403 G1 X129 Y114 E.383 G1 X129 Y109.855 E.1403 G1 X121 Y101.855 E.383 G1 X121 Y99.855 E.0677 ;PATH_TASK id=1279 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2 F720 G1 X129 Y107.71 Z2 F21000 G1 Z1.4 F720 G1 E.7 F1500 G1 F9212 G1 X129 Y105.71 E.0677 G1 X121 Y97.71 E.383 G1 X121 Y93.564 E.1403 G1 X129 Y101.565 E.383 G1 X129 Y97.42 E.1403 G1 X121 Y89.419 E.383 G1 X121 Y85.274 E.1403 G1 X129 Y93.275 E.383 G1 X129 Y89.13 E.1403 G1 X122.37 Y82.5 E.31741 G1 X126.515 Y82.5 E.1403 G1 X129 Y84.985 E.11899 G1 X129 Y82.985 E.0677 ;PATH_TASK id=1280 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2 F720 G1 X128.902 Y125.729 Z2 F21000 G1 Z1.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.524242 G1 F9212 G1 X128.445 Y125.906 E.01961 G1 X128.131 Y125.906 E.01258 G1 X128.902 Y126.677 E.04365 G1 X128.902 Y125.769 E.03634 ;PATH_TASK id=1281 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2 F720 G1 X129.184 Y127.299 Z2 F21000 G1 Z1.4 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F9212 G1 X127.754 Y125.868 E.06846 G1 X127.178 Y125.868 E.01949 G1 X129 Y127.691 E.08725 G1 X129 Y128.267 E.01949 G1 X125.58 Y124.847 E.16372 G1 X124.995 Y124.837 E.01983 G1 X129 Y128.842 E.19176 G1 X129 Y129.418 E.01949 G1 X124.409 Y124.827 E.21979 G1 X123.823 Y124.817 E.01983 G1 X129 Y129.994 E.24783 G1 X129 Y130.57 E.01949 G1 X123.286 Y124.856 E.27352 G1 X123.145 Y125.29 E.01546 G1 X129 Y131.145 E.2803 G1 X129 Y131.721 E.01949 G1 X123.003 Y125.724 E.28708 G1 X122.956 Y125.868 E.00515 G1 X122.572 Y125.868 E.01299 G1 X129 Y132.297 E.30771 G1 X129 Y132.872 E.01949 G1 X121.997 Y125.868 E.33527 G1 X121.421 Y125.868 E.01949 G1 X129 Y133.448 E.36283 G1 X129 Y133.963 E.01744 G1 X128.94 Y133.963 E.00205 G1 X121.026 Y126.049 E.37886 G1 X121 Y126.075 E.00124 G1 X121 Y126.598 E.01773 G1 X128.364 Y133.963 E.35255 G1 X127.789 Y133.963 E.01949 G1 X121 Y127.174 E.32499 G1 X121 Y127.75 E.01949 G1 X127.213 Y133.963 E.29743 G1 X126.637 Y133.963 E.01949 G1 X121 Y128.326 E.26987 G1 X121 Y128.901 E.01949 G1 X126.062 Y133.963 E.24231 G1 X125.486 Y133.963 E.01949 G1 X121 Y129.477 E.21476 G1 X121 Y130.053 E.01949 G1 X124.91 Y133.963 E.1872 G1 X124.334 Y133.963 E.01949 G1 X121 Y130.628 E.15964 G1 X121 Y131.204 E.01949 G1 X123.759 Y133.963 E.13208 G1 X123.183 Y133.963 E.01949 G1 X121 Y131.78 E.10452 G1 X121 Y132.355 E.01949 G1 X122.607 Y133.963 E.07696 G1 X122.032 Y133.963 E.01949 G1 X120.816 Y132.748 E.05818 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:1.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;1.6 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;1.6 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1282 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 M486 S0 G1 Z2.2 F720 G1 X129.346 Y134.983 Z2.2 F21000 G1 Z1.6 F720 G1 E.7 F1500 ;TYPE:Inner wall G1 F6559 G1 X120.654 Y134.983 E.29424 G1 X120.654 Y82.154 E1.78821 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y134.943 E1.78685 ;PATH_TASK id=1283 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 M204 T3000 G1 X129.389 Y134.943 F21000 M73 P88 R4 G1 X129.389 Y135.026 G1 X129.389 Y135.026 G1 X129.775 Y135.411 M204 P3000 ;TYPE:Outer wall G1 F6559 G1 X120.225 Y135.411 E.32326 G1 X120.225 Y81.725 E1.81722 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y135.371 E1.81586 ;PATH_TASK id=1284 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z2.2 F720 G1 X129.389 Y135.026 Z2.2 F21000 G1 X129.389 Y135.026 G1 X129.389 Y134.048 G1 X129.185 Y134.048 G1 Z1.6 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.425261 G1 F6000 G1 X128.412 Y134.822 E.03477 ;PATH_TASK id=1285 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X127.871 Y134.822 F21000 G1 F6000 G1 X129.185 Y133.507 E.05908 ;PATH_TASK id=1286 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X129.185 Y132.967 F21000 G1 F6000 G1 X127.33 Y134.822 E.08339 ;PATH_TASK id=1287 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X126.79 Y134.822 F21000 G1 F6000 G1 X129.185 Y132.426 E.10771 ;PATH_TASK id=1288 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X129.185 Y131.885 F21000 G1 F6000 G1 X126.249 Y134.822 E.13202 ;PATH_TASK id=1289 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X125.708 Y134.822 F21000 G1 F6000 G1 X129.185 Y131.345 E.15633 ;PATH_TASK id=1290 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X129.185 Y130.804 F21000 G1 F6000 G1 X125.167 Y134.822 E.18064 ;PATH_TASK id=1291 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X124.627 Y134.822 F21000 G1 F6000 G1 X129.185 Y130.263 E.20495 ;PATH_TASK id=1292 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X129.185 Y129.722 F21000 G1 F6000 G1 X124.086 Y134.822 E.22926 ;PATH_TASK id=1293 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X123.545 Y134.822 F21000 G1 F6000 G1 X129.185 Y129.182 E.25357 ;PATH_TASK id=1294 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X129.185 Y128.641 F21000 G1 F6000 G1 X123.005 Y134.822 E.27788 ;PATH_TASK id=1295 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X122.464 Y134.822 F21000 G1 F6000 G1 X129.185 Y128.1 E.30219 ;PATH_TASK id=1296 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X129.185 Y127.56 F21000 G1 F6000 G1 X121.923 Y134.822 E.3265 ;PATH_TASK id=1297 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X121.382 Y134.822 F21000 G1 F6000 G1 X129.185 Y127.019 E.35081 ;PATH_TASK id=1298 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X129.158 Y126.505 F21000 G1 F6000 G1 X120.842 Y134.822 E.37391 ;PATH_TASK id=1299 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X120.815 Y134.308 F21000 G1 F6000 G1 X128.617 Y126.505 E.35081 ;PATH_TASK id=1300 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X128.077 Y126.505 F21000 G1 F6000 G1 X120.815 Y133.767 E.3265 ;PATH_TASK id=1301 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X120.815 Y133.226 F21000 G1 F6000 G1 X127.536 Y126.505 E.30219 ;PATH_TASK id=1302 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X126.995 Y126.505 F21000 G1 F6000 G1 X120.815 Y132.686 E.27787 ;PATH_TASK id=1303 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X120.815 Y132.145 F21000 G1 F6000 G1 X126.455 Y126.505 E.25356 ;PATH_TASK id=1304 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X125.914 Y126.505 F21000 G1 F6000 G1 X120.815 Y131.604 E.22925 ;PATH_TASK id=1305 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X120.815 Y131.063 F21000 G1 F6000 G1 X125.373 Y126.505 E.20494 ;PATH_TASK id=1306 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X124.832 Y126.505 F21000 G1 F6000 G1 X120.815 Y130.523 E.18063 ;PATH_TASK id=1307 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X120.815 Y129.982 F21000 G1 F6000 G1 X124.292 Y126.505 E.15632 ;PATH_TASK id=1308 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X123.751 Y126.505 F21000 G1 F6000 G1 X120.815 Y129.441 E.13201 ;PATH_TASK id=1309 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X120.815 Y128.901 F21000 G1 F6000 G1 X123.21 Y126.505 E.1077 ;PATH_TASK id=1310 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X122.67 Y126.505 F21000 G1 F6000 G1 X120.815 Y128.36 E.08339 ;PATH_TASK id=1311 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X120.815 Y127.819 F21000 G1 F6000 G1 X122.129 Y126.505 E.05908 ;PATH_TASK id=1312 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X121.588 Y126.505 F21000 G1 F6000 G1 X120.815 Y127.278 E.03477 ;PATH_TASK id=1313 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.2 F720 G1 X128.868 Y125.273 Z2.2 F21000 G1 Z1.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.592589 G1 F6559 G1 X127.93 Y126.211 E.06065 G1 X128.868 Y126.211 E.04289 G1 X128.868 Y125.313 E.04106 ;PATH_TASK id=1314 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X129.184 Y124.569 F21000 ;WIDTH:0.449999 G1 F6559 G1 X127.47 Y126.283 E.08204 G1 X126.894 Y126.283 E.01949 G1 X129 Y124.176 E.10083 G1 X129 Y123.601 E.01949 G1 X126.318 Y126.283 E.12839 G1 X125.743 Y126.283 E.01949 G1 X129 Y123.025 E.15595 G1 X129 Y122.449 E.01949 G1 X125.167 Y126.283 E.18351 G1 X124.591 Y126.283 E.01949 G1 X129 Y121.873 E.21107 G1 X129 Y121.298 E.01949 G1 X124.016 Y126.283 E.23862 G1 X123.44 Y126.283 E.01949 G1 X129 Y120.722 E.26618 G1 X129 Y120.146 E.01949 G1 X122.864 Y126.283 E.29374 G1 X122.288 Y126.283 E.01949 G1 X129 Y119.571 E.3213 G1 X129 Y118.995 E.01949 G1 X121.713 Y126.283 E.34886 G1 X121.137 Y126.283 E.01949 G1 X129 Y118.419 E.37642 G1 X129 Y117.844 E.01949 G1 X121 Y125.845 E.383 G1 X121 Y125.269 E.01949 G1 X128.749 Y117.519 E.37098 G1 X128.174 Y117.519 E.01949 G1 X121 Y124.693 E.34343 G1 X121 Y124.117 E.01949 G1 X127.598 Y117.519 E.31587 G1 X127.022 Y117.519 E.01949 G1 X121 Y123.542 E.28831 G1 X121 Y122.966 E.01949 G1 X126.447 Y117.519 E.26075 G1 X125.871 Y117.519 E.01949 G1 X121 Y122.39 E.23319 G1 X121 Y121.815 E.01949 G1 X125.295 Y117.519 E.20564 G1 X124.72 Y117.519 E.01949 G1 X121 Y121.239 E.17808 G1 X121 Y120.663 E.01949 G1 X124.144 Y117.519 E.15052 G1 X123.568 Y117.519 E.01949 G1 X121 Y120.088 E.12296 G1 X121 Y119.512 E.01949 G1 X122.993 Y117.519 E.0954 G1 X122.417 Y117.519 E.01949 G1 X121 Y118.936 E.06784 G1 X121 Y118.36 E.01949 G1 X122.024 Y117.336 E.04905 ;PATH_TASK id=1315 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X121.056 Y117.448 F21000 ;WIDTH:0.42715 G1 F6559 G1 X121.043 Y117.382 E.00216 ;PATH_TASK id=1316 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 ;WIDTH:0.389626 G1 X121.03 Y117.315 E.00195 G1 X121.03 Y114.873 E.07042 ;PATH_TASK id=1317 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X121 Y113.679 F21000 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6559 G1 X121 Y114.331 E.02204 G1 X121.407 Y113.924 E.01949 G1 X121.407 Y114.697 E.02617 G1 X123.822 Y117.112 E.11561 G1 X127.967 Y117.112 E.1403 G1 X121 Y110.145 E.33352 G1 X121 Y106 E.1403 G1 X128.593 Y113.593 E.36351 G1 X128.593 Y112.74 E.02889 G1 X129 Y113.147 E.01949 G1 X129 Y109.855 E.11141 G1 X121 Y101.855 E.383 G1 X121 Y97.71 E.1403 G1 X129 Y105.71 E.383 G1 X129 Y101.565 E.1403 G1 X121 Y93.564 E.383 G1 X121 Y89.419 E.1403 G1 X129 Y97.42 E.383 G1 X129 Y93.275 E.1403 G1 X121 Y85.274 E.383 G1 X121 Y82.5 E.09393 G1 X122.37 Y82.5 E.04638 G1 X129 Y89.13 E.31741 G1 X129 Y84.985 E.1403 G1 X126.515 Y82.5 E.11899 G1 X128.515 Y82.5 E.0677 ;PATH_TASK id=1318 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.2 F720 G1 X128.97 Y117.227 Z2.2 F21000 G1 Z1.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.38894 G1 F6559 G1 X128.97 Y113.588 E.1047 ;PATH_TASK id=1319 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.2 F720 G1 X121.731 Y117.308 Z2.2 F21000 G1 Z1.6 F720 G1 E.7 F1500 G1 F6559 G1 X121.666 Y117.345 E.00216 G1 X121.731 Y117.383 E.00216 G1 X121.733 Y117.38 E.00009 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:1.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;1.8 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;1.8 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1320 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 M486 S0 G1 Z2.4 F720 G1 X129.346 Y127.302 Z2.4 F21000 G1 Z1.8 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F5429 G1 X120.654 Y127.302 E.29424 G1 X120.654 Y82.154 E1.52823 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y127.262 E1.52688 ;PATH_TASK id=1321 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 M204 T3000 G1 X129.389 Y127.262 F21000 G1 X129.389 Y127.345 G1 X129.389 Y127.345 G1 X129.775 Y127.731 M204 P3000 ;TYPE:Outer wall G1 F5429 G1 X120.225 Y127.731 E.32326 G1 X120.225 Y81.725 E1.55724 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y127.691 E1.55589 ;PATH_TASK id=1322 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z2.4 F720 G1 X129.389 Y127.345 Z2.4 F21000 G1 X128.96 Y123.87 G1 X128.409 Y123.87 G1 X128.409 Y123.645 G1 Z1.8 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.42674 G1 F5429 G1 X129.185 Y124.422 E.03505 ;PATH_TASK id=1323 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X129.185 Y124.964 F21000 G1 F5429 G1 X127.866 Y123.645 E.05955 ;PATH_TASK id=1324 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X127.323 Y123.645 F21000 G1 F5429 G1 X129.185 Y125.507 E.08405 ;PATH_TASK id=1325 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X129.185 Y126.05 F21000 G1 F5429 G1 X126.78 Y123.645 E.10855 ;PATH_TASK id=1326 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X126.237 Y123.645 F21000 G1 F5429 G1 X129.185 Y126.593 E.13305 ;PATH_TASK id=1327 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X129.185 Y127.136 F21000 G1 F5429 G1 X125.695 Y123.645 E.15755 ;PATH_TASK id=1328 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X125.152 Y123.645 F21000 G1 F5429 G1 X128.648 Y127.141 E.15779 ;PATH_TASK id=1329 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X128.105 Y127.141 F21000 G1 F5429 G1 X124.609 Y123.645 E.15779 ;PATH_TASK id=1330 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X124.066 Y123.645 F21000 G1 F5429 G1 X127.562 Y127.141 E.15779 ;PATH_TASK id=1331 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X127.019 Y127.141 F21000 G1 F5429 G1 X123.523 Y123.645 E.15779 ;PATH_TASK id=1332 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X122.981 Y123.645 F21000 G1 F5429 G1 X126.477 Y127.141 E.15779 ;PATH_TASK id=1333 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X125.934 Y127.141 F21000 G1 F5429 G1 X122.438 Y123.645 E.15779 ;PATH_TASK id=1334 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X121.895 Y123.645 F21000 G1 F5429 G1 X125.391 Y127.141 E.15779 ;PATH_TASK id=1335 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X124.848 Y127.141 F21000 G1 F5429 G1 X121.352 Y123.645 E.15779 ;PATH_TASK id=1336 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X120.815 Y123.651 F21000 G1 F5429 G1 X124.305 Y127.141 E.15754 ;PATH_TASK id=1337 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X123.763 Y127.141 F21000 G1 F5429 G1 X120.815 Y124.193 E.13304 ;PATH_TASK id=1338 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X120.815 Y124.736 F21000 G1 F5429 G1 X123.22 Y127.141 E.10854 ;PATH_TASK id=1339 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X122.677 Y127.141 F21000 G1 F5429 G1 X120.815 Y125.279 E.08404 ;PATH_TASK id=1340 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X120.815 Y125.822 F21000 G1 F5429 G1 X122.134 Y127.141 E.05954 ;PATH_TASK id=1341 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X121.591 Y127.141 F21000 G1 F5429 G1 X120.815 Y126.365 E.03504 ;PATH_TASK id=1342 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.4 F720 G1 X121.122 Y123.34 Z2.4 F21000 G1 Z1.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.513006 G1 F5429 G1 X121.063 Y123.34 E.0023 G1 X121.033 Y123.391 E.0023 G1 X121.063 Y123.442 E.0023 G1 X121.122 Y123.442 E.0023 G1 X121.131 Y123.426 E.00073 ;PATH_TASK id=1343 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.4 F720 G1 X127.453 Y118.194 Z2.4 F21000 G1 Z1.8 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F5429 G1 X128.939 Y119.68 E.07113 G1 X128.939 Y118.339 E.04538 G1 X128.794 Y118.194 E.00695 G1 X127.493 Y118.194 E.04403 ;PATH_TASK id=1344 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X128.533 Y118.579 F21000 ;WIDTH:0.506296 G1 F5429 G1 X128.475 Y118.579 E.00223 G1 X128.446 Y118.629 E.00223 G1 X128.475 Y118.679 E.00223 G1 X128.533 Y118.679 E.00223 G1 X128.542 Y118.664 E.00069 ;PATH_TASK id=1345 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.4 F720 G1 X129.184 Y120.212 Z2.4 F21000 G1 Z1.8 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F5429 G1 X127.166 Y118.194 E.09661 G1 X126.59 Y118.194 E.01949 G1 X129 Y120.605 E.11539 G1 X129 Y121.18 E.01949 G1 X126.014 Y118.194 E.14295 G1 X125.438 Y118.194 E.01949 G1 X129 Y121.756 E.17051 G1 X129 Y122.332 E.01949 G1 X124.863 Y118.194 E.19807 G1 X124.287 Y118.194 E.01949 G1 X129 Y122.907 E.22563 G1 X129 Y123.423 E.01744 G1 X128.94 Y123.423 E.00205 G1 X123.711 Y118.194 E.25029 G1 X123.136 Y118.194 E.01949 G1 X128.364 Y123.423 E.25029 G1 X127.789 Y123.423 E.01949 G1 X122.56 Y118.194 E.25029 G1 X121.984 Y118.194 E.01949 G1 X127.213 Y123.423 E.25029 G1 X126.637 Y123.423 E.01949 G1 X121.409 Y118.194 E.25029 G1 X121.206 Y118.194 E.00686 G1 X121.019 Y118.38 E.00893 G1 X126.062 Y123.423 E.24137 G1 X125.486 Y123.423 E.01949 G1 X121 Y118.936 E.21476 G1 X121 Y119.512 E.01949 G1 X124.91 Y123.423 E.1872 G1 X124.334 Y123.423 E.01949 G1 X121 Y120.088 E.15964 G1 X121 Y120.663 E.01949 G1 X123.759 Y123.423 E.13208 G1 X123.183 Y123.423 E.01949 G1 X121 Y121.239 E.10452 G1 X121 Y121.815 E.01949 G1 X122.607 Y123.423 E.07696 G1 X122.032 Y123.423 E.01949 G1 X120.816 Y122.207 E.05818 ;PATH_TASK id=1346 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.4 F720 G1 X129.181 Y116.955 Z2.4 F21000 G1 Z1.8 F720 G1 E.7 F1500 M204 P1500 ;TYPE:Internal Bridge ;WIDTH:0.4 ;HEIGHT:0.4 G1 F4500 M106 S255 G1 X128.371 Y117.765 E.05985 G1 X127.735 Y117.765 E.03325 G1 X128.979 Y116.521 E.09191 G1 X128.979 Y115.885 E.03325 G1 X127.099 Y117.765 E.13893 G1 X126.462 Y117.765 E.03325 G1 X128.979 Y115.249 E.18595 G1 X128.979 Y114.612 E.03325 G1 X125.826 Y117.765 E.23297 G1 X125.19 Y117.765 E.03325 G1 X128.979 Y113.976 E.27999 G1 X128.979 Y113.602 E.01955 G1 X128.826 Y113.579 E.00806 G1 X128.783 Y113.535 E.0032 G1 X124.553 Y117.765 E.31253 G1 X123.917 Y117.765 E.03325 G1 X128.465 Y113.217 E.33604 G1 X128.147 Y112.899 E.02351 G1 X123.28 Y117.765 E.35955 G1 X122.644 Y117.765 E.03325 G1 X125.756 Y114.653 E.22993 G1 X125.438 Y114.335 E.02351 G1 X122.008 Y117.765 E.25344 G1 X121.371 Y117.765 E.03325 G1 X125.119 Y114.017 E.27695 G1 X124.801 Y113.699 E.02351 G1 X121.021 Y117.479 E.27931 G1 X121.021 Y116.843 E.03325 G1 X124.483 Y113.381 E.2558 G1 X124.165 Y113.062 E.02351 G1 X121.021 Y116.206 E.23229 G1 X121.021 Y115.57 E.03325 G1 X121.774 Y114.817 E.05565 G1 X121.456 Y114.499 E.02351 G1 X120.819 Y115.136 E.0471 ;PATH_TASK id=1347 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.4 F720 G1 X121 Y112.145 Z2.4 F21000 G1 Z1.8 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 ;HEIGHT:0.2 G1 F5429 M106 S252 G1 X121 Y110.145 E.0677 G1 X123.729 Y112.874 E.13066 G1 X124.156 Y112.447 E.02043 G1 X126.065 Y114.356 E.09139 G1 X127.711 Y112.711 E.07878 G1 X121 Y106 E.32126 G1 X121 Y101.855 E.1403 G1 X129 Y109.855 E.383 G1 X129 Y105.71 E.1403 G1 X121 Y97.71 E.383 G1 X121 Y93.564 E.1403 G1 X129 Y101.565 E.383 G1 X129 Y97.42 E.1403 G1 X121 Y89.419 E.383 G1 X121 Y85.274 E.1403 G1 X129 Y93.275 E.383 G1 X129 Y89.13 E.1403 G1 X122.37 Y82.5 E.31741 G1 X126.515 Y82.5 E.1403 G1 X129 Y84.985 E.11899 G1 X129 Y82.985 E.0677 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;2 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;2 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1348 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 M486 S0 G1 Z2.6 F720 G1 X129.346 Y124.442 Z2.6 F21000 G1 Z2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F4850 G1 X120.654 Y124.442 E.29424 G1 X120.654 Y82.154 E1.43142 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y124.402 E1.43006 ;PATH_TASK id=1349 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 M204 T3000 G1 X129.389 Y124.402 F21000 G1 X129.389 Y124.485 G1 X129.775 Y124.871 M204 P3000 ;TYPE:Outer wall G1 F4850 G1 X120.225 Y124.871 E.32326 G1 X120.225 Y81.725 E1.46043 G1 X129.775 Y81.725 E.32326 M73 P89 R4 G1 X129.775 Y124.831 E1.45907 ;PATH_TASK id=1350 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z2.6 F720 G1 X129.389 Y124.485 Z2.6 F21000 G1 X128.398 Y124.485 G1 X128.398 Y124.281 G1 Z2 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.431911 G1 F4850 G1 X129.185 Y123.493 E.03602 ;PATH_TASK id=1351 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X129.185 Y122.943 F21000 G1 F4850 G1 X127.847 Y124.281 E.06119 ;PATH_TASK id=1352 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X127.297 Y124.281 F21000 G1 F4850 G1 X129.185 Y122.393 E.08635 ;PATH_TASK id=1353 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X129.185 Y121.843 F21000 G1 F4850 G1 X126.747 Y124.281 E.11151 ;PATH_TASK id=1354 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X126.197 Y124.281 F21000 G1 F4850 G1 X129.185 Y121.293 E.13668 ;PATH_TASK id=1355 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X129.185 Y120.743 F21000 G1 F4850 G1 X125.647 Y124.281 E.16184 ;PATH_TASK id=1356 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X125.097 Y124.281 F21000 G1 F4850 G1 X129.185 Y120.193 E.18701 ;PATH_TASK id=1357 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X129.185 Y119.642 F21000 G1 F4850 G1 X124.547 Y124.281 E.21217 ;PATH_TASK id=1358 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X123.997 Y124.281 F21000 G1 F4850 G1 X129.185 Y119.092 E.23733 ;PATH_TASK id=1359 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X129.185 Y118.542 F21000 G1 F4850 G1 X123.447 Y124.281 E.2625 ;PATH_TASK id=1360 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X122.896 Y124.281 F21000 G1 F4850 G1 X129.185 Y117.992 E.28766 ;PATH_TASK id=1361 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X128.754 Y117.873 F21000 G1 F4850 G1 X122.346 Y124.281 E.29309 ;PATH_TASK id=1362 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X121.796 Y124.281 F21000 G1 F4850 G1 X128.204 Y117.873 E.29309 ;PATH_TASK id=1363 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X127.654 Y117.873 F21000 G1 F4850 G1 X121.246 Y124.281 E.29309 ;PATH_TASK id=1364 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X120.815 Y124.162 F21000 G1 F4850 G1 X127.103 Y117.873 E.28766 ;PATH_TASK id=1365 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X126.553 Y117.873 F21000 G1 F4850 G1 X120.815 Y123.612 E.26249 ;PATH_TASK id=1366 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X120.815 Y123.062 F21000 G1 F4850 G1 X126.003 Y117.873 E.23733 ;PATH_TASK id=1367 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X125.453 Y117.873 F21000 G1 F4850 G1 X120.815 Y122.512 E.21216 ;PATH_TASK id=1368 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X120.815 Y121.961 F21000 G1 F4850 G1 X124.903 Y117.873 E.187 ;PATH_TASK id=1369 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X124.353 Y117.873 F21000 G1 F4850 G1 X120.815 Y121.411 E.16184 ;PATH_TASK id=1370 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X120.815 Y120.861 F21000 G1 F4850 G1 X123.803 Y117.873 E.13667 ;PATH_TASK id=1371 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X123.253 Y117.873 F21000 G1 F4850 G1 X120.815 Y120.311 E.11151 ;PATH_TASK id=1372 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X120.815 Y119.761 F21000 G1 F4850 G1 X122.703 Y117.873 E.08635 ;PATH_TASK id=1373 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X122.152 Y117.873 F21000 G1 F4850 G1 X120.815 Y119.211 E.06118 ;PATH_TASK id=1374 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X120.815 Y118.661 F21000 G1 F4850 G1 X121.602 Y117.873 E.03602 ;PATH_TASK id=1375 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.6 F720 G1 X121.102 Y113.733 Z2.6 F21000 G1 Z2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.509075 G1 F4850 G1 X121.078 Y113.659 E.00303 ;PATH_TASK id=1376 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 ;WIDTH:0.46102 G1 X121.054 Y113.584 E.00272 ;PATH_TASK id=1377 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 ;WIDTH:0.389662 G1 X121.03 Y113.51 E.00226 G1 X121.03 Y108.391 E.14756 ;PATH_TASK id=1378 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X121.407 Y108.552 F21000 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F4850 G1 X121.407 Y110.552 E.0677 G1 X124.161 Y113.306 E.13185 G1 X128.306 Y113.306 E.1403 G1 X121 Y106 E.34976 G1 X121 Y101.855 E.1403 G1 X128.593 Y109.448 E.36351 G1 X128.593 Y107.291 E.07301 G1 X129 Y107.035 E.01629 G1 X129 Y105.71 E.04482 G1 X121 Y97.71 E.383 G1 X121 Y93.564 E.1403 G1 X129 Y101.565 E.383 G1 X129 Y97.42 E.1403 G1 X121 Y89.419 E.383 G1 X121 Y85.274 E.1403 G1 X129 Y93.275 E.383 G1 X129 Y89.13 E.1403 G1 X122.37 Y82.5 E.31741 G1 X126.515 Y82.5 E.1403 G1 X129 Y84.985 E.11899 G1 X129 Y82.985 E.0677 ;PATH_TASK id=1379 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.6 F720 G1 X128.97 Y113.472 Z2.6 F21000 G1 Z2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.38894 G1 F4850 G1 X128.97 Y107.539 E.1707 ;PATH_TASK id=1380 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.6 F720 G1 X128.939 Y116.317 Z2.6 F21000 G1 Z2 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F4850 G1 X127.605 Y117.651 E.06385 G1 X128.939 Y117.651 E.04515 G1 X128.939 Y116.357 E.0438 ;PATH_TASK id=1381 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X128.572 Y117.22 F21000 ;WIDTH:0.417236 G1 F4850 G1 X128.502 Y117.26 E.00252 G1 X128.572 Y117.301 E.00252 G1 X128.575 Y117.295 E.00021 ;PATH_TASK id=1382 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.6 F720 G1 X127.134 Y117.834 Z2.6 F21000 G1 Z2 F720 G1 E.7 F1500 ;WIDTH:0.45 G1 F4850 G1 X129 Y115.968 E.08933 G1 X129 Y115.392 E.01949 G1 X126.742 Y117.651 E.10812 G1 X126.166 Y117.651 E.01949 G1 X129 Y114.817 E.13568 G1 X129 Y114.241 E.01949 G1 X125.59 Y117.651 E.16323 G1 X125.015 Y117.651 E.01949 G1 X128.953 Y113.713 E.1885 G1 X128.377 Y113.713 E.01949 G1 X124.439 Y117.651 E.1885 G1 X123.863 Y117.651 E.01949 G1 X127.801 Y113.713 E.1885 G1 X127.225 Y113.713 E.01949 G1 X123.288 Y117.651 E.1885 G1 X122.712 Y117.651 E.01949 G1 X126.65 Y113.713 E.1885 G1 X126.074 Y113.713 E.01949 G1 X122.136 Y117.651 E.1885 G1 X121.561 Y117.651 E.01949 G1 X125.498 Y113.713 E.1885 G1 X124.923 Y113.713 E.01949 G1 X121 Y117.636 E.1878 G1 X121 Y117.061 E.01949 G1 X124.347 Y113.713 E.16024 G1 X123.771 Y113.713 E.01949 G1 X121 Y116.485 E.13268 G1 X121 Y115.909 E.01949 G1 X123.196 Y113.713 E.10512 G1 X122.62 Y113.713 E.01949 G1 X121 Y115.333 E.07756 G1 X121 Y114.758 E.01949 G1 X122.227 Y113.53 E.05878 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:2.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;2.2 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;2.2 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1383 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 M486 S0 G1 Z2.8 F720 G1 X129.346 Y118.671 Z2.8 F21000 G1 Z2.2 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F4233 G1 X120.654 Y118.671 E.29424 G1 X120.654 Y82.154 E1.23605 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y118.631 E1.2347 ;PATH_TASK id=1384 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 M204 T3000 G1 X129.389 Y118.631 F21000 G1 X129.389 Y118.713 G1 X129.389 Y118.713 G1 X129.775 Y119.099 M204 P3000 ;TYPE:Outer wall G1 F4233 G1 X120.225 Y119.099 E.32326 G1 X120.225 Y81.725 E1.26507 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y119.059 E1.26371 ;PATH_TASK id=1385 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z2.8 F720 G1 X129.389 Y118.713 Z2.8 F21000 G1 X128.96 Y116.196 G1 X128.399 Y116.196 G1 X128.399 Y115.97 G1 Z2.2 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.431278 G1 F4233 G1 X129.185 Y116.757 E.0359 ;PATH_TASK id=1386 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X129.185 Y117.306 F21000 G1 F4233 G1 X127.85 Y115.97 E.06099 ;PATH_TASK id=1387 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X127.301 Y115.97 F21000 G1 F4233 G1 X129.185 Y117.855 E.08607 ;PATH_TASK id=1388 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X129.185 Y118.404 F21000 G1 F4233 G1 X126.751 Y115.97 E.11115 ;PATH_TASK id=1389 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X126.202 Y115.97 F21000 G1 F4233 G1 X128.741 Y118.509 E.11594 ;PATH_TASK id=1390 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X128.192 Y118.509 F21000 G1 F4233 G1 X125.653 Y115.97 E.11594 ;PATH_TASK id=1391 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X125.104 Y115.97 F21000 G1 F4233 G1 X127.642 Y118.509 E.11594 ;PATH_TASK id=1392 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X127.093 Y118.509 F21000 G1 F4233 G1 X124.554 Y115.97 E.11594 ;PATH_TASK id=1393 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X124.005 Y115.97 F21000 G1 F4233 G1 X126.544 Y118.509 E.11594 ;PATH_TASK id=1394 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X125.995 Y118.509 F21000 G1 F4233 G1 X123.456 Y115.97 E.11594 ;PATH_TASK id=1395 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X122.907 Y115.97 F21000 G1 F4233 G1 X125.445 Y118.509 E.11594 ;PATH_TASK id=1396 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X124.896 Y118.509 F21000 G1 F4233 G1 X122.358 Y115.97 E.11594 ;PATH_TASK id=1397 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X121.808 Y115.97 F21000 G1 F4233 G1 X124.347 Y118.509 E.11594 ;PATH_TASK id=1398 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X123.798 Y118.509 F21000 G1 F4233 G1 X121.259 Y115.97 E.11594 ;PATH_TASK id=1399 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X120.815 Y116.075 F21000 G1 F4233 G1 X123.249 Y118.509 E.11114 ;PATH_TASK id=1400 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X122.699 Y118.509 F21000 G1 F4233 G1 X120.815 Y116.625 E.08606 ;PATH_TASK id=1401 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X120.815 Y117.174 F21000 G1 F4233 G1 X122.15 Y118.509 E.06098 ;PATH_TASK id=1402 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X121.601 Y118.509 F21000 G1 F4233 G1 X120.815 Y117.723 E.0359 ;PATH_TASK id=1403 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.8 F720 G1 X121.206 Y114.388 Z2.8 F21000 G1 Z2.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.449999 G1 F4233 G1 X121.061 Y114.533 E.00695 G1 X121.061 Y115.748 E.04112 G1 X128.939 Y115.748 E.26669 G1 X128.939 Y114.533 E.04112 G1 X128.794 Y114.388 E.00695 G1 X121.246 Y114.388 E.2555 ;PATH_TASK id=1404 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X121.502 Y114.83 F21000 ;WIDTH:0.519343 G1 F4233 G1 X121.502 Y115.306 E.01887 G1 X128.498 Y115.306 E.27712 G1 X128.498 Y114.83 E.01887 G1 X121.542 Y114.83 E.27553 ;PATH_TASK id=1405 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.8 F720 G1 X123.339 Y107.485 Z2.8 F21000 G1 Z2.2 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F4233 G1 X122.351 Y106.498 E.04727 G1 X121.925 Y106.925 E.02043 G1 X121 Y106 E.04428 G1 X121 Y101.855 E.1403 G1 X125.27 Y106.125 E.20442 G1 X125.697 Y105.698 E.02043 G1 X126.684 Y106.685 E.04727 ;PATH_TASK id=1406 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.8 F720 G1 X129.181 Y113.137 Z2.8 F21000 G1 Z2.2 F720 G1 E.7 F1500 M204 P1500 ;TYPE:Internal Bridge ;WIDTH:0.4 ;HEIGHT:0.4 G1 F4233 M106 S255 G1 X128.359 Y113.96 E.06078 G1 X127.722 Y113.96 E.03325 G1 X128.979 Y112.703 E.09284 G1 X128.979 Y112.067 E.03325 G1 X127.086 Y113.96 E.13986 G1 X126.45 Y113.96 E.03325 G1 X128.979 Y111.43 E.18688 G1 X128.979 Y110.794 E.03325 G1 X125.813 Y113.96 E.2339 G1 X125.177 Y113.96 E.03325 G1 X128.979 Y110.158 E.28092 G1 X128.979 Y109.521 E.03325 G1 X124.54 Y113.96 E.32794 G1 X123.904 Y113.96 E.03325 G1 X128.979 Y108.885 E.37496 G1 X128.979 Y108.248 E.03325 M73 P89 R3 G1 X123.268 Y113.96 E.42198 G1 X122.631 Y113.96 E.03325 G1 X128.979 Y107.612 E.469 G1 X128.979 Y107.555 E.00299 G1 X127.733 Y108.34 E.07696 G1 X127.674 Y108.281 E.00439 G1 X121.995 Y113.96 E.41957 G1 X121.359 Y113.96 E.03325 G1 X127.355 Y107.963 E.44308 G1 X127.037 Y107.645 E.02351 G1 X121.021 Y113.661 E.4445 G1 X121.021 Y113.024 E.03325 G1 X126.719 Y107.326 E.42099 G1 X126.401 Y107.008 E.02351 G1 X121.021 Y112.388 E.39748 G1 X121.021 Y111.752 E.03325 G1 X126.083 Y106.69 E.37397 G1 X125.764 Y106.372 E.02351 G1 X121.021 Y111.115 E.35046 G1 X121.021 Y110.479 E.03325 G1 X123.374 Y108.126 E.17382 G1 X123.055 Y107.808 E.02351 G1 X121.021 Y109.842 E.15031 G1 X121.021 Y109.206 E.03325 G1 X122.737 Y107.49 E.1268 G1 X122.419 Y107.172 E.02351 G1 X120.819 Y108.772 E.11825 ;PATH_TASK id=1407 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.8 F720 G1 X121 Y95.71 Z2.8 F21000 G1 Z2.2 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 ;HEIGHT:0.2 G1 F4233 M106 S252 G1 X121 Y97.71 E.0677 G1 X129 Y105.71 E.383 G1 X129 Y101.565 E.1403 G1 X121 Y93.564 E.383 G1 X121 Y89.419 E.1403 G1 X129 Y97.42 E.383 G1 X129 Y93.275 E.1403 G1 X121 Y85.274 E.383 G1 X121 Y82.5 E.09393 G1 X122.37 Y82.5 E.04638 G1 X129 Y89.13 E.31741 G1 X129 Y84.985 E.1403 G1 X126.515 Y82.5 E.11899 G1 X128.515 Y82.5 E.0677 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:2.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;2.4 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;2.4 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1408 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 M486 S0 G1 Z3 F720 G1 X129.346 Y116.768 Z3 F21000 G1 Z2.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F3983 G1 X120.654 Y116.768 E.29424 G1 X120.654 Y82.154 E1.17165 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y116.728 E1.17029 ;PATH_TASK id=1409 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 M204 T3000 G1 X129.389 Y116.728 F21000 G1 X129.389 Y116.811 G1 X129.389 Y116.811 G1 X129.775 Y117.196 M204 P3000 ;TYPE:Outer wall G1 F3983 G1 X120.225 Y117.196 E.32326 G1 X120.225 Y81.725 E1.20066 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y117.156 E1.1993 ;PATH_TASK id=1410 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z3 F720 G1 X129.389 Y116.811 Z3 F21000 G1 X128.399 Y116.81 G1 X128.399 Y116.606 G1 Z2.4 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.431278 G1 F3983 G1 X129.185 Y115.82 E.0359 ;PATH_TASK id=1411 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X129.185 Y115.271 F21000 G1 F3983 G1 X127.85 Y116.606 E.06099 ;PATH_TASK id=1412 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X127.301 Y116.606 F21000 G1 F3983 G1 X129.185 Y114.722 E.08607 ;PATH_TASK id=1413 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X129.185 Y114.172 F21000 G1 F3983 G1 X126.751 Y116.606 E.11115 ;PATH_TASK id=1414 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X126.202 Y116.606 F21000 G1 F3983 G1 X128.741 Y114.068 E.11594 ;PATH_TASK id=1415 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X128.192 Y114.068 F21000 M73 P90 R3 G1 F3983 G1 X125.653 Y116.606 E.11594 ;PATH_TASK id=1416 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X125.104 Y116.606 F21000 G1 F3983 G1 X127.642 Y114.068 E.11594 ;PATH_TASK id=1417 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X127.093 Y114.068 F21000 G1 F3983 G1 X124.554 Y116.606 E.11594 ;PATH_TASK id=1418 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X124.005 Y116.606 F21000 G1 F3983 G1 X126.544 Y114.068 E.11594 ;PATH_TASK id=1419 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X125.995 Y114.068 F21000 G1 F3983 G1 X123.456 Y116.606 E.11594 ;PATH_TASK id=1420 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X122.907 Y116.606 F21000 G1 F3983 G1 X125.445 Y114.068 E.11594 ;PATH_TASK id=1421 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X124.896 Y114.068 F21000 G1 F3983 G1 X122.358 Y116.606 E.11594 ;PATH_TASK id=1422 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X121.808 Y116.606 F21000 G1 F3983 G1 X124.347 Y114.068 E.11594 ;PATH_TASK id=1423 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X123.798 Y114.068 F21000 G1 F3983 G1 X121.259 Y116.606 E.11594 ;PATH_TASK id=1424 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X120.815 Y116.501 F21000 G1 F3983 G1 X123.249 Y114.068 E.11114 ;PATH_TASK id=1425 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X122.699 Y114.068 F21000 G1 F3983 G1 X120.815 Y115.952 E.08606 ;PATH_TASK id=1426 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X120.815 Y115.403 F21000 G1 F3983 G1 X122.15 Y114.068 E.06098 ;PATH_TASK id=1427 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X121.601 Y114.068 F21000 G1 F3983 G1 X120.815 Y114.854 E.0359 ;PATH_TASK id=1428 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3 F720 G1 X121.137 Y107.703 Z3 F21000 G1 Z2.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.539932 G1 F3983 G1 X121.075 Y107.703 E.00257 G1 X121.043 Y107.757 E.00257 G1 X121.075 Y107.811 E.00257 G1 X121.137 Y107.811 E.00257 G1 X121.148 Y107.791 E.00091 ;PATH_TASK id=1429 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3 F720 G1 X121 Y104.073 Z3 F21000 G1 Z2.4 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F3983 G1 X121 Y106.073 E.0677 G2 X121.988 Y107.305 I3.2 J-1.556 E.05391 G1 X126.133 Y107.305 E.1403 G3 X125.687 Y106.891 I.797 J-1.308 E.02073 G1 X124.313 Y104.819 E.08417 G1 X123.964 Y104.47 E.01671 G1 X121.891 Y103.095 E.08417 G3 X121 Y101.928 I2.435 J-2.784 E.05006 G1 X121 Y97.783 E.1403 G2 X121.891 Y98.95 I3.327 J-1.617 E.05006 G1 X123.964 Y100.325 E.08417 G1 X124.313 Y100.674 E.01671 G1 X125.687 Y102.746 E.08417 G1 X126.036 Y103.095 E.01671 G1 X128.109 Y104.47 E.08417 G3 X129 Y105.637 I-2.435 J2.784 E.05006 G1 X129 Y101.492 E.1403 G2 X128.109 Y100.325 I-3.327 J1.617 E.05006 G1 X126.036 Y98.95 E.08417 G1 X125.687 Y98.601 E.01671 G1 X124.313 Y96.529 E.08417 G1 X123.964 Y96.18 E.01671 G1 X121.891 Y94.805 E.08417 G3 X121 Y93.638 I2.435 J-2.784 E.05006 G1 X121 Y89.493 E.1403 G2 X121.891 Y90.66 I3.327 J-1.617 E.05006 G1 X123.964 Y92.034 E.08417 G1 X124.313 Y92.384 E.01671 G1 X125.687 Y94.456 E.08417 G1 X126.036 Y94.805 E.01671 G1 X128.109 Y96.18 E.08417 G3 X129 Y97.347 I-2.435 J2.784 E.05006 G1 X129 Y93.202 E.1403 G2 X128.109 Y92.034 I-3.327 J1.617 E.05006 G1 X126.036 Y90.66 E.08417 G1 X125.687 Y90.311 E.01671 G1 X124.313 Y88.239 E.08417 G1 X123.964 Y87.889 E.01671 G1 X121.891 Y86.515 E.08417 G3 X121 Y85.348 I2.435 J-2.784 E.05006 G1 X121 Y82.5 E.09641 G1 X122.086 Y82.5 E.03678 G1 X123.964 Y83.744 E.07625 G1 X124.313 Y84.094 E.01671 G1 X125.687 Y86.166 E.08417 G1 X126.036 Y86.515 E.01671 G1 X128.109 Y87.889 E.08417 G3 X129 Y89.057 I-2.435 J2.784 E.05006 G1 X129 Y84.912 E.1403 G2 X128.109 Y83.744 I-3.327 J1.617 E.05006 G1 X126.231 Y82.5 E.07625 G1 X128.231 Y82.5 E.0677 ;PATH_TASK id=1430 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3 F720 G1 X129.184 Y112.12 Z3 F21000 G1 Z2.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.449999 G1 F3983 G1 X127.458 Y113.845 E.0826 G1 X126.882 Y113.845 E.01949 G1 X129 Y111.727 E.10139 G1 X129 Y111.152 E.01949 G1 X126.307 Y113.845 E.12894 G1 X125.731 Y113.845 E.01949 G1 X129 Y110.576 E.1565 G1 X129 Y110 E.01949 G1 X125.155 Y113.845 E.18406 G1 X124.58 Y113.845 E.01949 G1 X129 Y109.424 E.21162 G1 X129 Y108.849 E.01949 G1 X124.004 Y113.845 E.23918 G1 X123.428 Y113.845 E.01949 G1 X129 Y108.273 E.26673 G1 X129 Y107.712 E.019 G1 X128.986 Y107.712 E.00049 G1 X122.853 Y113.845 E.2936 G1 X122.277 Y113.845 E.01949 G1 X128.41 Y107.712 E.2936 G1 X127.835 Y107.712 E.01949 G1 X121.701 Y113.845 E.2936 G1 X121.126 Y113.845 E.01949 G1 X127.259 Y107.712 E.2936 G1 X126.683 Y107.712 E.01949 G1 X121 Y113.395 E.27207 G1 X121 Y112.82 E.01949 G1 X126.107 Y107.712 E.24451 G1 X125.532 Y107.712 E.01949 G1 X121 Y112.244 E.21696 G1 X121 Y111.668 E.01949 G1 X124.956 Y107.712 E.1894 G1 X124.38 Y107.712 E.01949 G1 X121 Y111.093 E.16184 G1 X121 Y110.517 E.01949 G1 X123.805 Y107.712 E.13428 G1 X123.229 Y107.712 E.01949 G1 X121 Y109.941 E.10672 G1 X121 Y109.366 E.01949 G1 X122.653 Y107.712 E.07916 G1 X122.078 Y107.712 E.01949 G1 X120.816 Y108.973 E.06038 ;PATH_TASK id=1431 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3 F720 G1 X127.922 Y113.772 Z3 F21000 G1 Z2.4 F720 G1 E.7 F1500 ;WIDTH:0.595971 G1 F3983 G1 X128.866 Y113.772 E.04342 G1 X128.866 Y112.828 E.04342 G1 X127.951 Y113.744 E.05956 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:2.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;2.6 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;2.6 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1432 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 M486 S0 G1 Z3.2 F720 G1 X129.346 Y114.865 Z3.2 F21000 G1 Z2.6 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F4164 G1 X120.654 Y114.865 E.29424 G1 X120.654 Y82.154 E1.10724 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y114.825 E1.10588 ;PATH_TASK id=1433 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 M204 T3000 G1 X129.389 Y114.825 F21000 G1 X129.389 Y114.908 G1 X129.775 Y115.293 M204 P3000 ;TYPE:Outer wall G1 F4164 G1 X120.225 Y115.293 E.32326 G1 X120.225 Y81.725 E1.13625 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y115.253 E1.13489 ;PATH_TASK id=1434 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z3.2 F720 G1 X129.389 Y114.908 Z3.2 F21000 G1 X128.96 Y112.39 G1 X128.399 Y112.39 G1 X128.399 Y112.165 G1 Z2.6 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.431278 G1 F4164 G1 X129.185 Y112.951 E.0359 ;PATH_TASK id=1435 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X129.185 Y113.5 F21000 G1 F4164 G1 X127.85 Y112.165 E.06099 ;PATH_TASK id=1436 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X127.301 Y112.165 F21000 G1 F4164 G1 X129.185 Y114.049 E.08607 ;PATH_TASK id=1437 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X129.185 Y114.599 F21000 G1 F4164 G1 X126.751 Y112.165 E.11115 ;PATH_TASK id=1438 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X126.202 Y112.165 F21000 G1 F4164 G1 X128.741 Y114.703 E.11594 ;PATH_TASK id=1439 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X128.192 Y114.703 F21000 G1 F4164 G1 X125.653 Y112.165 E.11594 ;PATH_TASK id=1440 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X125.104 Y112.165 F21000 G1 F4164 G1 X127.642 Y114.703 E.11594 ;PATH_TASK id=1441 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X127.093 Y114.703 F21000 G1 F4164 G1 X124.554 Y112.165 E.11594 ;PATH_TASK id=1442 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X124.005 Y112.165 F21000 G1 F4164 G1 X126.544 Y114.703 E.11594 ;PATH_TASK id=1443 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X125.995 Y114.703 F21000 G1 F4164 G1 X123.456 Y112.165 E.11594 ;PATH_TASK id=1444 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X122.907 Y112.165 F21000 G1 F4164 G1 X125.445 Y114.703 E.11594 ;PATH_TASK id=1445 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X124.896 Y114.703 F21000 G1 F4164 G1 X122.358 Y112.165 E.11594 ;PATH_TASK id=1446 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X121.808 Y112.165 F21000 G1 F4164 G1 X124.347 Y114.703 E.11594 ;PATH_TASK id=1447 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X123.798 Y114.703 F21000 G1 F4164 G1 X121.259 Y112.165 E.11594 ;PATH_TASK id=1448 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X120.815 Y112.27 F21000 G1 F4164 G1 X123.249 Y114.703 E.11114 ;PATH_TASK id=1449 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X122.699 Y114.703 F21000 G1 F4164 G1 X120.815 Y112.819 E.08606 ;PATH_TASK id=1450 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X120.815 Y113.368 F21000 G1 F4164 G1 X122.15 Y114.703 E.06098 ;PATH_TASK id=1451 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X121.601 Y114.703 F21000 G1 F4164 G1 X120.815 Y113.917 E.0359 ;PATH_TASK id=1452 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.2 F720 G1 X121.122 Y111.86 Z3.2 F21000 G1 Z2.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.51301 G1 F4164 G1 X121.063 Y111.86 E.0023 G1 X121.033 Y111.911 E.0023 G1 X121.063 Y111.962 E.0023 G1 X121.122 Y111.962 E.0023 G1 X121.131 Y111.945 E.00073 ;PATH_TASK id=1453 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.2 F720 G1 X127.133 Y106.106 Z3.2 F21000 G1 Z2.6 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F4164 G1 X129 Y107.973 E.08939 G1 X129 Y108.549 E.01949 G1 X126.741 Y106.289 E.10818 G1 X126.165 Y106.289 E.01949 G1 X129 Y109.124 E.13573 G1 X129 Y109.7 E.01949 G1 X125.589 Y106.289 E.16329 G1 X125.014 Y106.289 E.01949 G1 X129 Y110.276 E.19085 G1 X129 Y110.851 E.01949 G1 X124.438 Y106.289 E.21841 G1 X123.862 Y106.289 E.01949 G1 X129 Y111.427 E.24597 G1 X129 Y111.942 E.01744 G1 X128.94 Y111.942 E.00205 G1 X123.286 Y106.289 E.27063 G1 X122.711 Y106.289 E.01949 G1 X128.364 Y111.942 E.27063 G1 X127.789 Y111.942 E.01949 G1 X122.135 Y106.289 E.27063 G1 X121.559 Y106.289 E.01949 G1 X127.213 Y111.942 E.27063 G1 X126.637 Y111.942 E.01949 G1 X121 Y106.305 E.26987 G1 X121 Y106.88 E.01949 G1 X126.062 Y111.942 E.24231 G1 X125.486 Y111.942 E.01949 G1 X121 Y107.456 E.21476 G1 X121 Y108.032 E.01949 G1 X124.91 Y111.942 E.1872 G1 X124.334 Y111.942 E.01949 G1 X121 Y108.607 E.15964 G1 X121 Y109.183 E.01949 G1 X123.759 Y111.942 E.13208 G1 X123.183 Y111.942 E.01949 G1 X121 Y109.759 E.10452 G1 X121 Y110.335 E.01949 G1 X122.607 Y111.942 E.07696 G1 X122.032 Y111.942 E.01949 G1 X120.816 Y110.727 E.05818 ;PATH_TASK id=1454 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.2 F720 G1 X127.604 Y106.289 Z3.2 F21000 G1 Z2.6 F720 G1 E.7 F1500 G1 F4164 G1 X128.939 Y107.624 E.06391 G1 X128.939 Y106.289 E.04519 G1 X127.644 Y106.289 E.04384 ;PATH_TASK id=1455 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X128.572 Y106.639 F21000 ;WIDTH:0.41796 G1 F4164 G1 X128.501 Y106.68 E.00253 G1 X128.572 Y106.72 E.00253 G1 X128.575 Y106.714 E.00021 ;PATH_TASK id=1456 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.2 F720 G1 X129 Y103.261 Z3.2 F21000 G1 Z2.6 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F4164 G1 X129 Y101.261 E.0677 G1 X128.811 Y100.674 E.02088 G1 X128.109 Y99.971 E.03364 G1 X126.036 Y99.304 E.0737 G1 X125.334 Y98.601 E.03364 G1 X124.666 Y96.529 E.0737 G1 X123.964 Y95.826 E.03364 G1 X121.891 Y95.159 E.0737 G1 X121.189 Y94.456 E.03364 G1 X121 Y93.869 E.02088 G1 X121 Y91.869 E.0677 ;PATH_TASK id=1457 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.2 F720 G1 X121 Y96.014 Z3.2 F21000 G1 Z2.6 F720 G1 E.7 F1500 G1 F4164 G1 X121 Y98.014 E.0677 G1 X121.189 Y98.601 E.02088 G1 X121.891 Y99.304 E.03364 G1 X123.964 Y99.971 E.0737 G1 X124.666 Y100.674 E.03364 G1 X125.334 Y102.746 E.0737 G1 X126.036 Y103.449 E.03364 G1 X128.109 Y104.116 E.0737 G1 X128.811 Y104.819 E.03364 G3 X129 Y105.882 I-1.557 J.825 E.03714 G1 X125.009 Y105.882 E.13512 G1 X124.666 Y104.819 E.0378 G1 X123.964 Y104.116 E.03364 G1 X121.891 Y103.449 E.0737 G1 X121.189 Y102.746 E.03364 G1 X121 Y102.159 E.02088 G1 X121 Y100.159 E.0677 ;PATH_TASK id=1458 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.2 F720 G1 X129 Y99.116 Z3.2 F21000 G1 Z2.6 F720 G1 E.7 F1500 G1 F4164 G1 X129 Y97.116 E.0677 G1 X128.811 Y96.529 E.02088 G1 X128.109 Y95.826 E.03364 G1 X126.036 Y95.159 E.0737 G1 X125.334 Y94.456 E.03364 G1 X124.666 Y92.384 E.0737 G1 X123.964 Y91.681 E.03364 G1 X121.891 Y91.014 E.0737 G1 X121.189 Y90.311 E.03364 G1 X121 Y89.724 E.02088 G1 X121 Y87.724 E.0677 ;PATH_TASK id=1459 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.2 F720 G1 X129 Y86.681 Z3.2 F21000 G1 Z2.6 F720 G1 E.7 F1500 G1 F4164 G1 X129 Y84.681 E.0677 G1 X128.811 Y84.094 E.02088 G1 X128.109 Y83.391 E.03364 G1 X126.036 Y82.724 E.0737 G1 X125.812 Y82.5 E.01074 G1 X127.812 Y82.5 E.0677 ;PATH_TASK id=1460 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.2 F720 G1 X129 Y90.826 Z3.2 F21000 G1 Z2.6 F720 G1 E.7 F1500 G1 F4164 G1 X129 Y88.826 E.0677 G1 X128.811 Y88.239 E.02088 G1 X128.109 Y87.536 E.03364 G1 X126.036 Y86.869 E.0737 G1 X125.334 Y86.166 E.03364 G1 X124.666 Y84.094 E.0737 G1 X123.964 Y83.391 E.03364 G1 X121.891 Y82.724 E.0737 G1 X121.667 Y82.5 E.01074 G1 X121 Y82.5 E.02259 G1 X121 Y85.579 E.10424 G1 X121.189 Y86.166 E.02088 G1 X121.891 Y86.869 E.03364 G1 X123.964 Y87.536 E.0737 G1 X124.666 Y88.239 E.03364 G1 X125.334 Y90.311 E.0737 G1 X126.036 Y91.014 E.03364 G1 X128.109 Y91.681 E.0737 G1 X128.811 Y92.384 E.03364 G1 X129 Y92.971 E.02088 G1 X129 Y94.971 E.0677 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:2.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;2.8 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;2.8 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1461 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 M486 S0 G1 Z3.4 F720 G1 X129.346 Y112.962 Z3.4 F21000 G1 Z2.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F3918 G1 X120.654 Y112.962 E.29424 G1 X120.654 Y82.154 E1.04283 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y112.922 E1.04147 ;PATH_TASK id=1462 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 M204 T3000 G1 X129.389 Y112.922 F21000 G1 X129.389 Y113.005 G1 X129.775 Y113.39 M204 P3000 ;TYPE:Outer wall G1 F3918 G1 X120.225 Y113.39 E.32326 G1 X120.225 Y81.725 E1.07184 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y113.35 E1.07048 ;PATH_TASK id=1463 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z3.4 F720 G1 X129.389 Y113.005 Z3.4 F21000 G1 X128.403 Y113.005 G1 X128.403 Y112.801 G1 Z2.8 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.429277 G1 F3918 G1 X129.185 Y112.019 E.03553 ;PATH_TASK id=1464 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X129.185 Y111.472 F21000 G1 F3918 G1 X127.857 Y112.801 E.06035 ;PATH_TASK id=1465 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X127.31 Y112.801 F21000 G1 F3918 G1 X129.185 Y110.926 E.08517 ;PATH_TASK id=1466 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X129.185 Y110.379 F21000 G1 F3918 G1 X126.764 Y112.801 E.11 ;PATH_TASK id=1467 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X126.218 Y112.801 F21000 G1 F3918 G1 X129.185 Y109.833 E.13482 ;PATH_TASK id=1468 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X129.185 Y109.287 F21000 G1 F3918 G1 X125.671 Y112.801 E.15965 ;PATH_TASK id=1469 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X125.125 Y112.801 F21000 G1 F3918 G1 X129.185 Y108.74 E.18447 ;PATH_TASK id=1470 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X129.185 Y108.194 F21000 G1 F3918 G1 X124.578 Y112.801 E.20929 ;PATH_TASK id=1471 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X124.032 Y112.801 F21000 G1 F3918 G1 X129.185 Y107.648 E.23412 ;PATH_TASK id=1472 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X128.7 Y107.586 F21000 G1 F3918 G1 X123.486 Y112.801 E.23689 ;PATH_TASK id=1473 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X122.939 Y112.801 F21000 G1 F3918 G1 X128.153 Y107.586 E.23689 ;PATH_TASK id=1474 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X127.607 Y107.586 F21000 G1 F3918 G1 X122.393 Y112.801 E.23689 ;PATH_TASK id=1475 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X121.846 Y112.801 F21000 G1 F3918 G1 X127.061 Y107.586 E.23689 ;PATH_TASK id=1476 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X126.514 Y107.586 F21000 G1 F3918 G1 X121.3 Y112.801 E.23689 ;PATH_TASK id=1477 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X120.815 Y112.739 F21000 G1 F3918 G1 X125.968 Y107.586 E.23411 ;PATH_TASK id=1478 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X125.421 Y107.586 F21000 G1 F3918 G1 X120.815 Y112.193 E.20929 ;PATH_TASK id=1479 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X120.815 Y111.647 F21000 G1 F3918 G1 X124.875 Y107.586 E.18446 ;PATH_TASK id=1480 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X124.329 Y107.586 F21000 G1 F3918 G1 X120.815 Y111.1 E.15964 ;PATH_TASK id=1481 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X120.815 Y110.554 F21000 G1 F3918 G1 X123.782 Y107.586 E.13482 ;PATH_TASK id=1482 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X123.236 Y107.586 F21000 G1 F3918 G1 X120.815 Y110.007 E.10999 ;PATH_TASK id=1483 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X120.815 Y109.461 F21000 G1 F3918 G1 X122.689 Y107.586 E.08517 ;PATH_TASK id=1484 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X122.143 Y107.586 F21000 G1 F3918 G1 X120.815 Y108.915 E.06034 ;PATH_TASK id=1485 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X120.815 Y108.368 F21000 G1 F3918 G1 X121.597 Y107.586 E.03552 ;PATH_TASK id=1486 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.4 F720 G1 X128.969 Y104.692 Z3.4 F21000 G1 Z2.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.388955 G1 F3918 G1 X128.97 Y104.662 E.00087 G1 X128.97 Y99.377 E.15206 ;PATH_TASK id=1487 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.4 F720 G1 X121.061 Y107.364 Z3.4 F21000 G1 Z2.8 F720 G1 E.7 F1500 ;WIDTH:0.449319 G1 F3918 G1 X128.939 Y107.364 E.26624 G1 X128.942 Y105.008 E.07961 ;PATH_TASK id=1488 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 ;WIDTH:0.430956 G1 X128.955 Y104.85 E.00511 ;PATH_TASK id=1489 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 ;WIDTH:0.412626 G1 X128.969 Y104.692 E.00487 G1 X128.797 Y104.863 E.00744 ;PATH_TASK id=1490 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 ;WIDTH:0.44846 G1 X127.69 Y104.866 E.03732 G1 X122.31 Y104.866 E.18143 G1 X121.203 Y104.863 E.03732 G1 X121.057 Y104.718 E.00695 G3 X121.061 Y107.324 I-488.226 J2.002 E.08789 ;PATH_TASK id=1491 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X121.468 Y106.957 F21000 ;WIDTH:0.449999 G1 F3918 G1 X128.532 Y106.957 E.23913 G1 X128.532 Y105.273 E.05701 G1 X121.468 Y105.273 E.23913 G1 X121.468 Y106.917 E.05566 M73 P91 R3 ;PATH_TASK id=1492 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X121.875 Y106.55 F21000 G1 F3918 G1 X128.125 Y106.55 E.21157 G1 X128.125 Y105.68 E.02945 G1 X121.875 Y105.68 E.21157 G1 X121.875 Y106.51 E.0281 ;PATH_TASK id=1493 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X122.31 Y106.115 F21000 ;WIDTH:0.505948 G1 F3918 G1 X127.65 Y106.115 E.20561 ;PATH_TASK id=1494 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.4 F720 G1 X121.03 Y99.691 Z3.4 F21000 G1 Z2.8 F720 G1 E.7 F1500 ;WIDTH:0.388942 G1 F3918 G1 X121.03 Y104.652 E.14275 ;PATH_TASK id=1495 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.4 F720 G1 X122.66 Y104.459 Z3.4 F21000 G1 Z2.8 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F3918 G1 X124.66 Y104.459 E.0677 G1 X123.964 Y103.762 E.03332 G1 X121.891 Y103.802 E.07017 G1 X121.407 Y103.318 E.0232 G1 X121.407 Y99.173 E.1403 G1 X121.891 Y99.657 E.0232 G1 X123.964 Y99.617 E.07017 G1 X125.02 Y100.674 E.05056 G1 X124.98 Y102.746 E.07017 G1 X126.036 Y103.802 E.05056 G1 X128.109 Y103.762 E.07017 G1 X128.593 Y104.247 E.0232 G1 X128.593 Y102.247 E.0677 ;PATH_TASK id=1496 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.4 F720 G1 X129 Y94.219 Z3.4 F21000 G1 Z2.8 F720 G1 E.7 F1500 G1 F3918 G1 X129 Y92.219 E.0677 G1 X128.109 Y91.327 E.04268 G1 X126.036 Y91.367 E.07017 G1 X124.98 Y90.311 E.05056 G1 X125.02 Y88.239 E.07017 G1 X123.964 Y87.182 E.05056 G1 X121.891 Y87.222 E.07017 G1 X121 Y86.331 E.04268 G1 X121 Y82.5 E.12968 G1 X121.313 Y82.5 E.01062 G1 X121.891 Y83.077 E.02766 G1 X123.964 Y83.037 E.07017 G1 X125.02 Y84.094 E.05056 G1 X124.98 Y86.166 E.07017 G1 X126.036 Y87.222 E.05056 G1 X128.109 Y87.182 E.07017 G1 X129 Y88.074 E.04268 G1 X129 Y83.929 E.1403 G1 X128.109 Y83.037 E.04268 G1 X126.036 Y83.077 E.07017 G1 X125.458 Y82.5 E.02766 G1 X127.458 Y82.5 E.0677 ;PATH_TASK id=1497 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.4 F720 G1 X121 Y88.476 Z3.4 F21000 G1 Z2.8 F720 G1 E.7 F1500 G1 F3918 G1 X121 Y90.476 E.0677 G1 X121.891 Y91.367 E.04268 G1 X123.964 Y91.327 E.07017 G1 X125.02 Y92.384 E.05056 G1 X124.98 Y94.456 E.07017 G1 X126.036 Y95.512 E.05056 G1 X128.109 Y95.472 E.07017 G1 X129 Y96.364 E.04268 G1 X129 Y98.92 E.0865 G1 X128.593 Y99.083 E.01484 G1 X128.593 Y100.102 E.03451 G1 X128.109 Y99.617 E.0232 G1 X126.036 Y99.657 E.07017 G1 X124.98 Y98.601 E.05056 G1 X125.02 Y96.529 E.07017 G1 X123.964 Y95.472 E.05056 G1 X121.891 Y95.512 E.07017 G1 X121 Y94.621 E.04268 G1 X121 Y96.621 E.0677 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:3 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;3 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;3 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1498 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 M486 S0 G1 Z3.6 F720 G1 X120.654 Y108.384 Z3.6 F21000 G1 Z3 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F3194 G1 X120.654 Y82.154 E.88786 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y108.384 E.88786 G1 X120.694 Y108.384 E.29289 ;PATH_TASK id=1499 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 M204 T3000 G1 X120.694 Y108.426 F21000 G1 X120.611 Y108.427 G1 X120.225 Y108.812 M204 P3000 ;TYPE:Outer wall G1 F3194 G1 X120.225 Y81.725 E.91687 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y108.812 E.91687 G1 X120.265 Y108.812 E.3219 ;PATH_TASK id=1500 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z3.6 F720 G1 X120.611 Y108.427 Z3.6 F21000 G1 X120.611 Y105.943 G1 X121.059 Y105.943 G1 Z3 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.446624 G1 F3194 G1 X128.941 Y105.943 E.26459 G1 X128.941 Y105.685 E.00864 G1 X128.795 Y105.539 E.00694 G1 X121.205 Y105.539 E.25477 G1 X121.059 Y105.685 E.00694 G1 X121.059 Y105.903 E.0073 ;PATH_TASK id=1501 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.6 F720 G1 X122.397 Y99.135 Z3.6 F21000 G1 Z3 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F3194 G2 X123.348 Y99.148 I.542 J-4.633 E.03225 G1 X124.041 Y99.135 E.02347 G1 X124.366 Y99.276 E.01199 G1 X125.041 Y98.601 E.03231 G1 X124.959 Y96.529 E.07021 G1 X126.036 Y95.452 E.05156 G1 X128.109 Y95.533 E.07021 G1 X129 Y94.642 E.04268 G1 X129 Y90.497 E.1403 G1 X128.109 Y91.388 E.04268 G1 X126.036 Y91.306 E.07021 G1 X124.959 Y92.384 E.05156 G1 X125.041 Y94.456 E.07021 G1 X123.964 Y95.533 E.05156 G1 X121.891 Y95.452 E.07021 G1 X121 Y96.343 E.04268 G1 X121 Y92.198 E.1403 G1 X121.891 Y91.306 E.04268 G1 X123.964 Y91.388 E.07021 G1 X125.041 Y90.311 E.05156 G1 X124.959 Y88.239 E.07021 G1 X126.036 Y87.161 E.05156 G1 X128.109 Y87.243 E.07021 G1 X129 Y86.352 E.04268 G1 X129 Y82.5 E.13039 G1 X128.708 Y82.5 E.00992 G1 X128.109 Y83.098 E.02866 G1 X126.036 Y83.016 E.07021 G1 X124.959 Y84.094 E.05156 G1 X125.041 Y86.166 E.07021 G1 X123.964 Y87.243 E.05156 G1 X121.891 Y87.161 E.07021 G1 X121 Y88.053 E.04268 G1 X121 Y83.908 E.1403 G1 X121.891 Y83.016 E.04268 G1 X123.964 Y83.098 E.07021 G1 X124.562 Y82.5 E.02866 G1 X122.562 Y82.5 E.0677 ;PATH_TASK id=1502 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.6 F720 G1 X129.181 Y104.864 Z3.6 F21000 G1 Z3 F720 G1 E.7 F1500 M204 P1500 ;TYPE:Internal Bridge ;WIDTH:0.4 ;HEIGHT:0.4 G1 F3194 M106 S255 G1 X128.933 Y105.112 E.01835 G1 X128.297 Y105.112 E.03325 G1 X128.979 Y104.43 E.0504 G1 X128.979 Y103.794 E.03325 G1 X127.66 Y105.112 E.09742 G1 X127.024 Y105.112 E.03325 G1 X128.979 Y103.157 E.14444 G1 X128.979 Y102.521 E.03325 G1 X126.388 Y105.112 E.19147 G1 X125.751 Y105.112 E.03325 G1 X128.979 Y101.884 E.23849 G1 X128.979 Y101.248 E.03325 G1 X125.115 Y105.112 E.28551 G1 X124.478 Y105.112 E.03325 G1 X128.979 Y100.612 E.33253 G1 X128.979 Y99.975 E.03325 G1 X123.842 Y105.112 E.37955 G1 X123.206 Y105.112 E.03325 G1 X128.894 Y99.424 E.42028 G1 X128.465 Y99.595 E.02413 G1 X128.1 Y99.582 E.01911 G1 X122.569 Y105.112 E.40862 G1 X121.933 Y105.112 E.03325 G1 X127.468 Y99.577 E.40893 G1 X126.819 Y99.59 E.03391 G1 X121.296 Y105.112 E.40801 G1 X121.028 Y105.112 E.01401 G1 X121.021 Y105.119 E.00054 G1 X121.021 Y104.751 E.01924 G1 X126.274 Y99.499 E.38808 G1 X125.962 Y99.336 E.01837 G1 X125.881 Y99.255 E.00598 G1 X121.021 Y104.115 E.35908 G1 X121.021 Y103.478 E.03325 G1 X125.009 Y99.491 E.29462 G1 X124.453 Y99.781 E.03275 G1 X124.194 Y99.669 E.01475 G1 X121.021 Y102.842 E.23445 G1 X121.021 Y102.206 E.03325 G1 X123.656 Y99.571 E.19465 G1 X123.007 Y99.584 E.03391 G1 X121.021 Y101.569 E.14671 G1 X121.021 Y100.933 E.03325 G1 X122.39 Y99.564 E.10112 G1 X122.014 Y99.533 E.01968 G1 X121.899 Y99.418 E.00849 G1 X120.819 Y100.499 E.07986 ;PATH_TASK id=1503 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.6 F720 G1 X128.393 Y106.163 Z3.6 F21000 G1 Z3 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.433861 ;HEIGHT:0.2 G1 F3194 M106 S252 G1 X129.185 Y106.955 E.03639 ;PATH_TASK id=1504 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X129.185 Y107.508 F21000 G1 F3194 G1 X127.841 Y106.163 E.06181 ;PATH_TASK id=1505 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X127.288 Y106.163 F21000 G1 F3194 G1 X129.185 Y108.061 E.08723 ;PATH_TASK id=1506 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X128.794 Y108.222 F21000 G1 F3194 G1 X126.735 Y106.163 E.09465 ;PATH_TASK id=1507 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X126.182 Y106.163 F21000 G1 F3194 G1 X128.241 Y108.222 E.09465 ;PATH_TASK id=1508 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X127.688 Y108.222 F21000 G1 F3194 G1 X125.629 Y106.163 E.09465 ;PATH_TASK id=1509 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X125.076 Y106.163 F21000 G1 F3194 G1 X127.135 Y108.222 E.09465 ;PATH_TASK id=1510 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X126.582 Y108.222 F21000 G1 F3194 G1 X124.523 Y106.163 E.09465 ;PATH_TASK id=1511 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X123.97 Y106.163 F21000 G1 F3194 G1 X126.029 Y108.222 E.09465 ;PATH_TASK id=1512 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X125.477 Y108.222 F21000 G1 F3194 G1 X123.418 Y106.163 E.09465 ;PATH_TASK id=1513 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X122.865 Y106.163 F21000 G1 F3194 G1 X124.924 Y108.222 E.09465 ;PATH_TASK id=1514 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X124.371 Y108.222 F21000 G1 F3194 G1 X122.312 Y106.163 E.09465 ;PATH_TASK id=1515 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X121.759 Y106.163 F21000 G1 F3194 G1 X123.818 Y108.222 E.09465 ;PATH_TASK id=1516 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X123.265 Y108.222 F21000 G1 F3194 G1 X121.206 Y106.163 E.09465 ;PATH_TASK id=1517 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X120.815 Y106.325 F21000 G1 F3194 G1 X122.712 Y108.222 E.08722 ;PATH_TASK id=1518 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X122.159 Y108.222 F21000 G1 F3194 G1 X120.815 Y106.878 E.06181 ;PATH_TASK id=1519 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X120.815 Y107.431 F21000 G1 F3194 G1 X121.606 Y108.222 E.03639 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:3.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;3.2 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;3.2 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1520 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 M486 S0 G1 Z3.8 F720 G1 X129.346 Y107.003 Z3.8 F21000 G1 X129.346 Y106.961 G1 Z3.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F3284 G1 X120.654 Y106.961 E.29424 G1 X120.654 Y82.154 E.83969 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y106.921 E.83833 ;PATH_TASK id=1521 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 M204 T3000 G1 X129.389 Y106.921 F21000 G1 X129.389 Y107.003 G1 X129.389 Y107.004 G1 X129.775 Y107.389 M204 P3000 ;TYPE:Outer wall G1 F3284 G1 X120.225 Y107.389 E.32326 G1 X120.225 Y81.725 E.8687 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y107.349 E.86734 ;PATH_TASK id=1522 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z3.8 F720 G1 X129.389 Y107.004 Z3.8 F21000 G1 X128.393 Y107.003 G1 X128.393 Y106.799 G1 Z3.2 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.433862 G1 F3284 G1 X129.185 Y106.008 E.03639 ;PATH_TASK id=1523 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X129.185 Y105.455 F21000 G1 F3284 G1 X127.841 Y106.799 E.06181 ;PATH_TASK id=1524 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X127.288 Y106.799 F21000 G1 F3284 G1 X129.185 Y104.902 E.08723 ;PATH_TASK id=1525 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X128.794 Y104.74 F21000 G1 F3284 G1 X126.735 Y106.799 E.09465 ;PATH_TASK id=1526 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X126.182 Y106.799 F21000 G1 F3284 G1 X128.241 Y104.74 E.09465 ;PATH_TASK id=1527 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X127.688 Y104.74 F21000 G1 F3284 G1 X125.629 Y106.799 E.09465 ;PATH_TASK id=1528 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X125.076 Y106.799 F21000 G1 F3284 G1 X127.135 Y104.74 E.09465 ;PATH_TASK id=1529 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X126.582 Y104.74 F21000 G1 F3284 G1 X124.523 Y106.799 E.09465 ;PATH_TASK id=1530 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X123.97 Y106.799 F21000 G1 F3284 G1 X126.029 Y104.74 E.09465 ;PATH_TASK id=1531 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X125.477 Y104.74 F21000 G1 F3284 G1 X123.418 Y106.799 E.09465 ;PATH_TASK id=1532 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X122.865 Y106.799 F21000 G1 F3284 G1 X124.924 Y104.74 E.09465 ;PATH_TASK id=1533 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X124.371 Y104.74 F21000 G1 F3284 G1 X122.312 Y106.799 E.09465 ;PATH_TASK id=1534 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X121.759 Y106.799 F21000 G1 F3284 G1 X123.818 Y104.74 E.09465 ;PATH_TASK id=1535 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X123.265 Y104.74 F21000 G1 F3284 G1 X121.206 Y106.799 E.09465 ;PATH_TASK id=1536 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X120.815 Y106.638 F21000 G1 F3284 G1 X122.712 Y104.74 E.08722 ;PATH_TASK id=1537 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X122.159 Y104.74 F21000 G1 F3284 G1 X120.815 Y106.085 E.06181 ;PATH_TASK id=1538 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X120.815 Y105.532 F21000 G1 F3284 G1 X121.606 Y104.74 E.03639 ;PATH_TASK id=1539 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.8 F720 G1 X121.137 Y99.331 Z3.8 F21000 G1 Z3.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.539932 G1 F3284 G1 X121.075 Y99.331 E.00257 G1 X121.043 Y99.385 E.00257 G1 X121.075 Y99.439 E.00257 G1 X121.137 Y99.439 E.00257 G1 X121.148 Y99.419 E.00091 ;PATH_TASK id=1540 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X121.153 Y98.933 F21000 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F3284 G1 X121 Y98.933 E.00518 G1 X121 Y97.086 E.06252 G1 X121.168 Y96.529 E.01969 G1 X121.891 Y95.805 E.03464 G1 X123.964 Y95.18 E.07327 G1 X124.687 Y94.456 E.03464 G1 X125.313 Y92.384 E.07327 G1 X126.036 Y91.66 E.03464 G1 X128.109 Y91.035 E.07327 G1 X128.832 Y90.311 E.03464 G1 X129 Y89.754 E.01969 G1 X129 Y87.754 E.0677 ;PATH_TASK id=1541 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.8 F720 G1 X129 Y91.899 Z3.8 F21000 G1 Z3.2 F720 G1 E.7 F1500 G1 F3284 G1 X129 Y93.899 E.0677 G1 X128.832 Y94.456 E.01969 G1 X128.109 Y95.18 E.03464 G1 X126.036 Y95.805 E.07327 G1 X125.313 Y96.529 E.03464 G1 X124.687 Y98.601 E.07327 G1 X124.356 Y98.933 E.01587 G1 X128.501 Y98.933 E.1403 G2 X129 Y98.044 I-.578 J-.91 E.03594 G1 X129 Y96.044 E.0677 ;PATH_TASK id=1542 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.8 F720 G1 X129.184 Y102.596 Z3.8 F21000 G1 Z3.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.449999 G1 F3284 G1 X127.262 Y104.518 E.09198 G1 X126.686 Y104.518 E.01949 G1 X129 Y102.204 E.11077 G1 X129 Y101.628 E.01949 G1 X126.111 Y104.518 E.13833 G1 X125.535 Y104.518 E.01949 G1 X129 Y101.052 E.16589 G1 X129 Y100.477 E.01949 G1 X124.959 Y104.518 E.19345 G1 X124.384 Y104.518 E.01949 G1 X129 Y99.901 E.22101 G1 X129 Y99.34 E.019 G1 X128.986 Y99.34 E.00049 G1 X123.808 Y104.518 E.24787 G1 X123.232 Y104.518 E.01949 G1 X128.41 Y99.34 E.24787 G1 X127.835 Y99.34 E.01949 G1 X122.656 Y104.518 E.24787 G1 X122.081 Y104.518 E.01949 G1 X127.259 Y99.34 E.24787 G1 X126.683 Y99.34 E.01949 G1 X121.505 Y104.518 E.24787 G1 X121 Y104.518 E.01711 G1 X121 Y104.448 E.00237 G1 X126.107 Y99.34 E.24451 G1 X125.532 Y99.34 E.01949 G1 X121 Y103.872 E.21696 G1 X121 Y103.296 E.01949 G1 X124.956 Y99.34 E.1894 G1 X124.38 Y99.34 E.01949 G1 X121 Y102.721 E.16184 G1 X121 Y102.145 E.01949 G1 X123.805 Y99.34 E.13428 G1 X123.229 Y99.34 E.01949 G1 X121 Y101.569 E.10672 G1 X121 Y100.994 E.01949 G1 X122.653 Y99.34 E.07916 G1 X122.078 Y99.34 E.01949 G1 X120.816 Y100.601 E.06038 ;PATH_TASK id=1543 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.8 F720 G1 X121 Y94.941 Z3.8 F21000 G1 Z3.2 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F3284 G1 X121 Y92.941 E.0677 G1 X121.168 Y92.384 E.01969 G1 X121.891 Y91.66 E.03464 G1 X123.964 Y91.035 E.07327 G1 X124.687 Y90.311 E.03464 G1 X125.313 Y88.239 E.07327 G1 X126.036 Y87.515 E.03464 G1 X128.109 Y86.89 E.07327 G1 X128.832 Y86.166 E.03464 G1 X129 Y85.609 E.01969 G1 X129 Y82.5 E.10525 G1 X128.354 Y82.5 E.02188 G1 X128.109 Y82.745 E.01174 G1 X126.036 Y83.37 E.07327 G1 X125.313 Y84.094 E.03464 G1 X124.687 Y86.166 E.07327 G1 X123.964 Y86.89 E.03464 G1 X121.891 Y87.515 E.07327 G1 X121.168 Y88.239 E.03464 G1 X121 Y88.796 E.01969 G1 X121 Y90.796 E.0677 ;PATH_TASK id=1544 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.8 F720 G1 X121 Y86.651 Z3.8 F21000 G1 Z3.2 F720 G1 E.7 F1500 G1 F3284 G1 X121 Y84.651 E.0677 G1 X121.168 Y84.094 E.01969 G1 X121.891 Y83.37 E.03464 G1 X123.964 Y82.745 E.07327 G1 X124.209 Y82.5 E.01174 G1 X122.209 Y82.5 E.0677 ;PATH_TASK id=1545 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.8 F720 G1 X127.55 Y104.518 Z3.8 F21000 G1 Z3.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.449999 G1 F3284 G1 X128.939 Y104.518 E.04703 G1 X128.939 Y103.129 E.04703 G1 X127.578 Y104.49 E.06516 ;PATH_TASK id=1546 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X128.558 Y104.067 F21000 ;WIDTH:0.449746 G1 F3284 G1 X128.507 Y104.067 E.00172 G1 X128.482 Y104.111 E.00172 G1 X128.507 Y104.155 E.00172 G1 X128.558 Y104.155 E.00172 G1 X128.563 Y104.146 E.00037 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:3.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;3.4 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;3.4 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1547 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 M486 S0 G1 Z4 F720 G1 X120.654 Y105.538 Z4 F21000 M73 P92 R3 G1 Z3.4 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F2956 G1 X120.654 Y82.154 E.79152 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y105.538 E.79152 G1 X120.694 Y105.538 E.29289 ;PATH_TASK id=1548 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 M204 T3000 G1 X120.694 Y105.58 F21000 G1 X120.611 Y105.58 G1 X120.611 Y105.58 G1 X120.225 Y105.966 M204 P3000 ;TYPE:Outer wall G1 F2956 G1 X120.225 Y81.725 E.82053 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y105.966 E.82053 G1 X120.265 Y105.966 E.3219 ;PATH_TASK id=1549 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z4 F720 G1 X120.611 Y105.58 Z4 F21000 G1 X120.611 Y103.012 G1 X121.122 Y103.012 G1 Z3.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.51301 G1 F2956 G1 X121.063 Y103.012 E.0023 G1 X121.033 Y103.063 E.0023 G1 X121.063 Y103.114 E.0023 G1 X121.122 Y103.114 E.0023 G1 X121.131 Y103.098 E.00073 ;PATH_TASK id=1550 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4 F720 G1 X128.393 Y103.317 Z4 F21000 G1 Z3.4 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.433862 G1 F2956 G1 X129.185 Y104.109 E.03639 ;PATH_TASK id=1551 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X129.185 Y104.662 F21000 G1 F2956 G1 X127.841 Y103.317 E.06181 ;PATH_TASK id=1552 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X127.288 Y103.317 F21000 G1 F2956 G1 X129.185 Y105.215 E.08723 ;PATH_TASK id=1553 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X128.794 Y105.376 F21000 G1 F2956 G1 X126.735 Y103.317 E.09465 ;PATH_TASK id=1554 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X126.182 Y103.317 F21000 G1 F2956 G1 X128.241 Y105.376 E.09465 ;PATH_TASK id=1555 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X127.688 Y105.376 F21000 G1 F2956 G1 X125.629 Y103.317 E.09465 ;PATH_TASK id=1556 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X125.076 Y103.317 F21000 G1 F2956 G1 X127.135 Y105.376 E.09465 ;PATH_TASK id=1557 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X126.582 Y105.376 F21000 G1 F2956 G1 X124.523 Y103.317 E.09465 ;PATH_TASK id=1558 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X123.97 Y103.317 F21000 G1 F2956 G1 X126.029 Y105.376 E.09465 ;PATH_TASK id=1559 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X125.477 Y105.376 F21000 G1 F2956 G1 X123.418 Y103.317 E.09465 ;PATH_TASK id=1560 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X122.865 Y103.317 F21000 G1 F2956 G1 X124.924 Y105.376 E.09465 ;PATH_TASK id=1561 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X124.371 Y105.376 F21000 G1 F2956 G1 X122.312 Y103.317 E.09465 ;PATH_TASK id=1562 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X121.759 Y103.317 F21000 G1 F2956 G1 X123.818 Y105.376 E.09465 ;PATH_TASK id=1563 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X123.265 Y105.376 F21000 G1 F2956 G1 X121.206 Y103.317 E.09465 ;PATH_TASK id=1564 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X120.815 Y103.479 F21000 G1 F2956 G1 X122.712 Y105.376 E.08722 ;PATH_TASK id=1565 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X122.159 Y105.376 F21000 G1 F2956 G1 X120.815 Y104.032 E.06181 ;PATH_TASK id=1566 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X120.815 Y104.585 F21000 G1 F2956 G1 X121.606 Y105.376 E.03639 ;PATH_TASK id=1567 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4 F720 G1 X126.85 Y97.798 Z4 F21000 G1 Z3.4 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F2956 G1 X124.85 Y97.798 E.0677 G1 X125.666 Y96.529 E.0511 G1 X126.036 Y96.159 E.01772 G1 X128.109 Y94.826 E.0834 G2 X129 Y93.645 I-2.272 J-2.642 E.05049 G1 X129 Y89.5 E.1403 G3 X128.109 Y90.681 I-3.163 J-1.46 E.05049 G1 X126.036 Y92.014 E.0834 G1 X125.666 Y92.384 E.01772 G1 X124.334 Y94.456 E.0834 G1 X123.964 Y94.826 E.01772 G1 X121.891 Y96.159 E.0834 G2 X121 Y97.34 I2.272 J2.642 E.05049 G1 X121 Y93.195 E.1403 G3 X121.891 Y92.014 I3.163 J1.46 E.05049 G1 X123.964 Y90.681 E.0834 G1 X124.334 Y90.311 E.01772 G1 X125.666 Y88.239 E.0834 G1 X126.036 Y87.869 E.01772 G1 X128.109 Y86.536 E.0834 G2 X129 Y85.355 I-2.272 J-2.642 E.05049 G1 X129 Y82.5 E.09665 G1 X127.94 Y82.5 E.03589 G1 X126.036 Y83.724 E.07661 G1 X125.666 Y84.094 E.01772 G1 X124.334 Y86.166 E.0834 G1 X123.964 Y86.536 E.01772 G1 X121.891 Y87.869 E.0834 G2 X121 Y89.05 I2.272 J2.642 E.05049 G1 X121 Y84.905 E.1403 M73 P92 R2 G3 X121.891 Y83.724 I3.163 J1.46 E.05049 G1 X123.795 Y82.5 E.07661 G1 X121.795 Y82.5 E.0677 ;PATH_TASK id=1568 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4 F720 G1 X127.322 Y98.022 Z4 F21000 G1 Z3.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.449999 G1 F2956 G1 X129 Y99.701 E.08036 G1 X129 Y100.277 E.01949 G1 X126.929 Y98.206 E.09915 G1 X126.354 Y98.206 E.01949 G1 X129 Y100.852 E.12671 G1 X129 Y101.428 E.01949 G1 X125.778 Y98.206 E.15426 G1 X125.202 Y98.206 E.01949 G1 X129 Y102.004 E.18182 G1 X129 Y102.58 E.01949 G1 X124.626 Y98.206 E.20938 G1 X124.051 Y98.206 E.01949 G1 X128.94 Y103.095 E.23405 G1 X128.364 Y103.095 E.01949 G1 X123.475 Y98.206 E.23405 G1 X122.899 Y98.206 E.01949 G1 X127.789 Y103.095 E.23405 G1 X127.213 Y103.095 E.01949 G1 X122.324 Y98.206 E.23405 G1 X121.748 Y98.206 E.01949 G1 X126.637 Y103.095 E.23405 G1 X126.062 Y103.095 E.01949 G1 X121.172 Y98.206 E.23405 G1 X121 Y98.206 E.00585 G1 X121 Y98.609 E.01364 G1 X125.486 Y103.095 E.21476 G1 X124.91 Y103.095 E.01949 G1 X121 Y99.184 E.1872 G1 X121 Y99.76 E.01949 G1 X124.334 Y103.095 E.15964 G1 X123.759 Y103.095 E.01949 G1 X121 Y100.336 E.13208 G1 X121 Y100.911 E.01949 G1 X123.183 Y103.095 E.10452 G1 X122.607 Y103.095 E.01949 G1 X121 Y101.487 E.07696 G1 X121 Y102.063 E.01949 G1 X122.215 Y103.278 E.05818 ;PATH_TASK id=1569 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4 F720 G1 X128.873 Y99.192 Z4 F21000 G1 Z3.4 F720 G1 E.7 F1500 ;WIDTH:0.58228 G1 F2956 G1 X128.873 Y98.272 E.04129 G1 X127.953 Y98.272 E.04129 G1 X128.845 Y99.164 E.0566 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:3.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;3.6 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;3.6 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1570 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 M486 S0 G1 Z4.2 F720 G1 X120.654 Y104.114 Z4.2 F21000 G1 Z3.6 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F2834 G1 X120.654 Y82.154 E.74335 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y104.114 E.74335 G1 X120.694 Y104.114 E.29289 ;PATH_TASK id=1571 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 M204 T3000 G1 X120.694 Y104.157 F21000 G1 X120.611 Y104.157 G1 X120.611 Y104.157 G1 X120.225 Y104.543 M204 P3000 ;TYPE:Outer wall G1 F2834 G1 X120.225 Y81.725 E.77236 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y104.543 E.77236 G1 X120.265 Y104.543 E.3219 ;PATH_TASK id=1572 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z4.2 F720 G1 X120.611 Y104.157 Z4.2 F21000 G1 X121.04 Y99.151 G1 X121.877 Y97.887 G1 Z3.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.453636 G1 F2834 G1 X128.083 Y97.887 E.21197 ;PATH_TASK id=1573 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4.2 F720 G1 X121.468 Y98.296 Z4.2 F21000 G1 Z3.6 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F2834 G1 X128.532 Y98.296 E.23913 G1 X128.532 Y97.478 E.02768 G1 X121.468 Y97.478 E.23913 G1 X121.468 Y98.256 E.02633 ;PATH_TASK id=1574 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X121.061 Y98.703 F21000 G1 F2834 G1 X128.939 Y98.703 E.26669 G1 X128.939 Y97.071 E.05524 G1 X121.061 Y97.071 E.26669 G1 X121.061 Y98.663 E.05389 ;PATH_TASK id=1575 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4.2 F720 G1 X129 Y95.564 Z4.2 F21000 G1 Z3.6 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F2834 G1 X129 Y93.564 E.0677 G1 X125.901 Y96.664 E.14838 G1 X121.756 Y96.664 E.1403 G1 X129 Y89.419 E.3468 G1 X129 Y85.274 E.1403 G1 X121 Y93.275 E.383 G1 X121 Y89.13 E.1403 G1 X127.63 Y82.5 E.31741 G1 X123.485 Y82.5 E.1403 G1 X121 Y84.985 E.11899 G1 X121 Y82.985 E.0677 ;PATH_TASK id=1576 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4.2 F720 G1 X129.185 Y103.182 Z4.2 F21000 G1 Z3.6 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.423998 G1 F2834 G1 X128.414 Y103.953 E.03454 ;PATH_TASK id=1577 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X127.875 Y103.953 F21000 G1 F2834 G1 X129.185 Y102.643 E.05869 ;PATH_TASK id=1578 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X129.185 Y102.105 F21000 G1 F2834 G1 X127.337 Y103.953 E.08284 ;PATH_TASK id=1579 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X126.798 Y103.953 F21000 G1 F2834 G1 X129.185 Y101.566 E.10699 ;PATH_TASK id=1580 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X129.185 Y101.027 F21000 G1 F2834 G1 X126.259 Y103.953 E.13114 ;PATH_TASK id=1581 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X125.72 Y103.953 F21000 G1 F2834 G1 X129.185 Y100.488 E.15529 ;PATH_TASK id=1582 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X129.185 Y99.949 F21000 G1 F2834 G1 X125.181 Y103.953 E.17944 ;PATH_TASK id=1583 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X124.642 Y103.953 F21000 G1 F2834 G1 X129.185 Y99.41 E.20359 ;PATH_TASK id=1584 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X129.13 Y98.926 F21000 G1 F2834 G1 X124.103 Y103.953 E.22529 ;PATH_TASK id=1585 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X123.564 Y103.953 F21000 G1 F2834 G1 X128.592 Y98.926 E.22529 ;PATH_TASK id=1586 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X128.053 Y98.926 F21000 G1 F2834 G1 X123.025 Y103.953 E.22529 ;PATH_TASK id=1587 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X122.486 Y103.953 F21000 G1 F2834 G1 X127.514 Y98.926 E.22529 ;PATH_TASK id=1588 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X126.975 Y98.926 F21000 G1 F2834 G1 X121.947 Y103.953 E.22529 ;PATH_TASK id=1589 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X121.408 Y103.953 F21000 G1 F2834 G1 X126.436 Y98.926 E.22529 ;PATH_TASK id=1590 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X125.897 Y98.926 F21000 G1 F2834 G1 X120.869 Y103.953 E.22529 ;PATH_TASK id=1591 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X120.815 Y103.469 F21000 G1 F2834 G1 X125.358 Y98.926 E.20359 ;PATH_TASK id=1592 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X124.819 Y98.926 F21000 G1 F2834 G1 X120.815 Y102.93 E.17943 ;PATH_TASK id=1593 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X120.815 Y102.391 F21000 G1 F2834 G1 X124.28 Y98.926 E.15528 ;PATH_TASK id=1594 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X123.741 Y98.926 F21000 G1 F2834 G1 X120.815 Y101.852 E.13113 ;PATH_TASK id=1595 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X120.815 Y101.313 F21000 G1 F2834 G1 X123.202 Y98.926 E.10698 ;PATH_TASK id=1596 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X122.663 Y98.926 F21000 G1 F2834 G1 X120.815 Y100.774 E.08283 ;PATH_TASK id=1597 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X120.815 Y100.235 F21000 G1 F2834 G1 X122.124 Y98.926 E.05868 ;PATH_TASK id=1598 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X121.585 Y98.926 F21000 G1 F2834 G1 X120.815 Y99.696 E.03453 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:3.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;3.8 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;3.8 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1599 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 M486 S0 G1 Z4.4 F720 G1 X120.654 Y99.723 Z4.4 F21000 G1 Z3.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F2094 G1 X120.654 Y82.154 E.5947 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y99.723 E.5947 G1 X120.694 Y99.723 E.29289 ;PATH_TASK id=1600 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 M204 T3000 G1 X120.694 Y99.766 F21000 G1 X120.611 Y99.766 G1 X120.225 Y100.151 M204 P3000 ;TYPE:Outer wall G1 F2094 G1 X120.225 Y81.725 E.62371 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y100.151 E.62371 G1 X120.265 Y100.151 E.3219 ;PATH_TASK id=1601 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z4.4 F720 G1 X120.611 Y99.766 Z4.4 F21000 G1 X121.04 Y98.017 G1 X121.877 Y96.753 G1 Z3.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.453638 G1 F2094 G1 X128.083 Y96.753 E.21197 ;PATH_TASK id=1602 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4.4 F720 G1 X121.468 Y97.162 Z4.4 F21000 G1 Z3.8 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F2094 G1 X128.532 Y97.162 E.23913 G1 X128.532 Y96.344 E.02768 G1 X121.468 Y96.344 E.23913 G1 X121.468 Y97.122 E.02633 ;PATH_TASK id=1603 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X121.061 Y97.569 F21000 G1 F2094 G1 X128.939 Y97.569 E.26669 G1 X128.939 Y95.937 E.05524 M73 P93 R2 G1 X121.061 Y95.937 E.26669 G1 X121.061 Y97.529 E.05389 ;PATH_TASK id=1604 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4.4 F720 G1 X121 Y91.275 Z4.4 F21000 G1 Z3.8 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F2094 G1 X121 Y93.275 E.0677 G1 X129 Y85.274 E.383 G1 X129 Y89.419 E.1403 G1 X122.89 Y95.53 E.29251 G1 X127.035 Y95.53 E.1403 G1 X129 Y93.564 E.09409 G1 X129 Y91.564 E.0677 ;PATH_TASK id=1605 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4.4 F720 G1 X129.185 Y98.56 Z4.4 F21000 G1 Z3.8 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.423113 G1 F2094 G1 X128.416 Y97.791 E.03437 ;PATH_TASK id=1606 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X127.879 Y97.791 F21000 G1 F2094 G1 X129.185 Y99.098 E.05841 ;PATH_TASK id=1607 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X129.111 Y99.562 F21000 G1 F2094 G1 X127.341 Y97.791 E.07914 ;PATH_TASK id=1608 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X126.803 Y97.791 F21000 G1 F2094 G1 X128.573 Y99.562 E.07914 ;PATH_TASK id=1609 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X128.036 Y99.562 F21000 G1 F2094 G1 X126.266 Y97.791 E.07914 ;PATH_TASK id=1610 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X125.728 Y97.791 F21000 G1 F2094 G1 X127.498 Y99.562 E.07914 ;PATH_TASK id=1611 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X126.96 Y99.562 F21000 G1 F2094 G1 X125.19 Y97.791 E.07914 ;PATH_TASK id=1612 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X124.653 Y97.791 F21000 G1 F2094 G1 X126.423 Y99.562 E.07914 ;PATH_TASK id=1613 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X125.885 Y99.562 F21000 G1 F2094 G1 X124.115 Y97.791 E.07914 ;PATH_TASK id=1614 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X123.577 Y97.791 F21000 G1 F2094 G1 X125.347 Y99.562 E.07914 ;PATH_TASK id=1615 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X124.81 Y99.562 F21000 G1 F2094 G1 X123.04 Y97.791 E.07914 ;PATH_TASK id=1616 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X122.502 Y97.791 F21000 G1 F2094 G1 X124.272 Y99.562 E.07914 ;PATH_TASK id=1617 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X123.734 Y99.562 F21000 G1 F2094 G1 X121.964 Y97.791 E.07914 ;PATH_TASK id=1618 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X121.427 Y97.791 F21000 G1 F2094 G1 X123.197 Y99.562 E.07914 ;PATH_TASK id=1619 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X122.659 Y99.562 F21000 G1 F2094 G1 X120.889 Y97.791 E.07914 ;PATH_TASK id=1620 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X120.815 Y98.255 F21000 G1 F2094 G1 X122.121 Y99.562 E.05841 ;PATH_TASK id=1621 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X121.584 Y99.562 F21000 G1 F2094 G1 X120.815 Y98.793 E.03437 ;PATH_TASK id=1622 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4.4 F720 G1 X121.485 Y82.5 Z4.4 F21000 G1 Z3.8 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F2094 G1 X123.485 Y82.5 E.0677 G1 X121 Y84.985 E.11899 G1 X121 Y89.13 E.1403 G1 X127.63 Y82.5 E.31741 G1 X129 Y82.5 E.04638 G1 X129 Y83.129 E.02132 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;4 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;4 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1623 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 M486 S0 G1 Z4.6 F720 G1 X120.654 Y98.589 Z4.6 F21000 G1 Z4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F2120 G1 X120.654 Y82.154 E.55631 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y98.589 E.55631 G1 X120.694 Y98.589 E.29289 ;PATH_TASK id=1624 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 M204 T3000 G1 X120.694 Y98.631 F21000 G1 X120.611 Y98.631 G1 X120.611 Y98.632 G1 X120.225 Y99.017 M204 P3000 ;TYPE:Outer wall G1 F2120 G1 X120.225 Y81.725 E.58532 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y99.017 E.58532 G1 X120.265 Y99.017 E.3219 ;PATH_TASK id=1625 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z4.6 F720 G1 X120.611 Y98.632 Z4.6 F21000 G1 X121.04 Y96.882 G1 X126.169 Y94.396 G1 Z4 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F2120 G1 X128.169 Y94.396 E.0677 G1 X128.593 Y93.972 E.0203 G1 X128.593 Y89.827 E.1403 G1 X124.024 Y94.396 E.21872 G1 X121.407 Y94.396 E.0886 G1 X121.407 Y92.868 E.0517 G1 X129 Y85.274 E.36351 G1 X129 Y82.5 E.09393 G1 X127.63 Y82.5 E.04638 G1 X121.407 Y88.723 E.29792 G1 X121.407 Y87.87 E.02889 G1 X121 Y88.277 E.01949 G1 X121 Y84.985 E.11141 G1 X123.485 Y82.5 E.11899 G1 X121.485 Y82.5 E.0677 ;PATH_TASK id=1626 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4.6 F720 G1 X128.969 Y94.629 Z4.6 F21000 G1 Z4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.388957 G1 F2120 G1 X128.97 Y94.599 E.00087 G1 X128.97 Y89.995 E.13247 ;PATH_TASK id=1627 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4.6 F720 G1 X121.061 Y96.435 Z4.6 F21000 G1 Z4 F720 G1 E.7 F1500 ;WIDTH:0.449787 G1 F2120 G1 X128.939 Y96.435 E.26655 G3 X128.942 Y94.945 I169.689 J-.408 E.05039 ;PATH_TASK id=1628 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 ;WIDTH:0.430956 G1 X128.955 Y94.787 E.00511 ;PATH_TASK id=1629 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 ;WIDTH:0.412626 G1 X128.969 Y94.629 E.00487 G1 X128.797 Y94.8 E.00744 ;PATH_TASK id=1630 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 ;WIDTH:0.449475 G1 X128.123 Y94.803 E.02277 G1 X121.877 Y94.803 E.21117 G1 X121.203 Y94.8 E.02277 ;PATH_TASK id=1631 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 ;WIDTH:0.430957 G1 X121.117 Y94.715 E.0039 ;PATH_TASK id=1632 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 ;WIDTH:0.419029 G1 X121.031 Y94.629 E.00378 G1 X121.061 Y95.619 E.03096 ;PATH_TASK id=1633 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X121.061 Y96.395 E.02627 ;PATH_TASK id=1634 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X121.468 Y96.028 F21000 G1 F2120 G1 X128.532 Y96.028 E.23913 G1 X128.532 Y95.21 E.02768 G1 X121.468 Y95.21 E.23913 G1 X121.468 Y95.988 E.02633 ;PATH_TASK id=1635 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X121.877 Y95.619 F21000 ;WIDTH:0.45366 G1 F2120 G1 X128.083 Y95.619 E.21198 ;PATH_TASK id=1636 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4.6 F720 G1 X121.03 Y88.674 Z4.6 F21000 G1 Z4 F720 G1 E.7 F1500 ;WIDTH:0.388944 G1 F2120 G1 X121.03 Y94.589 E.1702 ;PATH_TASK id=1637 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4.6 F720 G1 X129.185 Y97.658 Z4.6 F21000 G1 Z4 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.423113 G1 F2120 G1 X128.416 Y98.427 E.03437 ;PATH_TASK id=1638 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X127.879 Y98.427 F21000 G1 F2120 G1 X129.185 Y97.121 E.05841 ;PATH_TASK id=1639 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X129.111 Y96.657 F21000 G1 F2120 G1 X127.341 Y98.427 E.07914 ;PATH_TASK id=1640 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X126.803 Y98.427 F21000 G1 F2120 G1 X128.573 Y96.657 E.07914 ;PATH_TASK id=1641 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X128.036 Y96.657 F21000 G1 F2120 G1 X126.266 Y98.427 E.07914 ;PATH_TASK id=1642 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X125.728 Y98.427 F21000 G1 F2120 G1 X127.498 Y96.657 E.07914 ;PATH_TASK id=1643 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X126.96 Y96.657 F21000 G1 F2120 G1 X125.19 Y98.427 E.07914 ;PATH_TASK id=1644 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X124.653 Y98.427 F21000 G1 F2120 G1 X126.423 Y96.657 E.07914 ;PATH_TASK id=1645 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X125.885 Y96.657 F21000 G1 F2120 G1 X124.115 Y98.427 E.07914 ;PATH_TASK id=1646 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X123.577 Y98.427 F21000 G1 F2120 G1 X125.347 Y96.657 E.07914 ;PATH_TASK id=1647 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X124.81 Y96.657 F21000 G1 F2120 G1 X123.04 Y98.427 E.07914 ;PATH_TASK id=1648 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X122.502 Y98.427 F21000 G1 F2120 G1 X124.272 Y96.657 E.07914 ;PATH_TASK id=1649 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X123.734 Y96.657 F21000 G1 F2120 G1 X121.964 Y98.427 E.07914 ;PATH_TASK id=1650 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X121.427 Y98.427 F21000 G1 F2120 G1 X123.197 Y96.657 E.07914 ;PATH_TASK id=1651 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X122.659 Y96.657 F21000 G1 F2120 G1 X120.889 Y98.427 E.07914 ;PATH_TASK id=1652 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X120.815 Y97.964 F21000 G1 F2120 G1 X122.121 Y96.657 E.05841 ;PATH_TASK id=1653 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X121.584 Y96.657 F21000 G1 F2120 G1 X120.815 Y97.426 E.03437 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:4.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;4.2 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;4.2 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1654 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 M486 S0 G1 Z4.8 F720 G1 X120.654 Y97.454 Z4.8 F21000 G1 Z4.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F2372 G1 X120.654 Y82.154 E.51791 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y97.454 E.51791 G1 X120.694 Y97.454 E.29289 ;PATH_TASK id=1655 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 M204 T3000 G1 X120.694 Y97.497 F21000 G1 X120.611 Y97.497 G1 X120.225 Y97.883 M204 P3000 ;TYPE:Outer wall G1 F2372 G1 X120.225 Y81.725 E.54692 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y97.883 E.54692 G1 X120.265 Y97.883 E.3219 ;PATH_TASK id=1656 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z4.8 F720 G1 X120.611 Y97.497 Z4.8 F21000 G1 X120.611 Y95.389 G1 X121.169 Y95.389 G1 Z4.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F2372 G1 X128.791 Y95.389 E.21547 ;PATH_TASK id=1657 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X129.185 Y96.292 F21000 M204 P2000 ;TYPE:Top surface ;WIDTH:0.423113 G1 F2372 G1 X128.416 Y95.523 E.03437 ;PATH_TASK id=1658 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X127.879 Y95.523 F21000 G1 F2372 G1 X129.185 Y96.829 E.05841 ;PATH_TASK id=1659 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X129.111 Y97.293 F21000 G1 F2372 G1 X127.341 Y95.523 E.07914 ;PATH_TASK id=1660 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X126.803 Y95.523 F21000 G1 F2372 G1 X128.573 Y97.293 E.07914 ;PATH_TASK id=1661 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X128.036 Y97.293 F21000 G1 F2372 G1 X126.266 Y95.523 E.07914 ;PATH_TASK id=1662 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X125.728 Y95.523 F21000 G1 F2372 G1 X127.498 Y97.293 E.07914 ;PATH_TASK id=1663 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X126.96 Y97.293 F21000 G1 F2372 G1 X125.19 Y95.523 E.07914 ;PATH_TASK id=1664 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X124.653 Y95.523 F21000 G1 F2372 G1 X126.423 Y97.293 E.07914 ;PATH_TASK id=1665 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X125.885 Y97.293 F21000 G1 F2372 G1 X124.115 Y95.523 E.07914 ;PATH_TASK id=1666 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X123.577 Y95.523 F21000 G1 F2372 G1 X125.347 Y97.293 E.07914 ;PATH_TASK id=1667 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X124.81 Y97.293 F21000 G1 F2372 G1 X123.04 Y95.523 E.07914 ;PATH_TASK id=1668 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X122.502 Y95.523 F21000 G1 F2372 G1 X124.272 Y97.293 E.07914 ;PATH_TASK id=1669 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X123.734 Y97.293 F21000 G1 F2372 G1 X121.964 Y95.523 E.07914 ;PATH_TASK id=1670 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X121.427 Y95.523 F21000 G1 F2372 G1 X123.197 Y97.293 E.07914 ;PATH_TASK id=1671 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X122.659 Y97.293 F21000 G1 F2372 G1 X120.889 Y95.523 E.07914 ;PATH_TASK id=1672 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X120.815 Y95.987 F21000 G1 F2372 G1 X122.121 Y97.293 E.05841 ;PATH_TASK id=1673 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X121.584 Y97.293 F21000 G1 F2372 G1 X120.815 Y96.524 E.03437 ;PATH_TASK id=1674 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4.8 F720 G1 X120.819 Y94.682 Z4.8 F21000 G1 Z4.2 F720 G1 E.7 F1500 M204 P1500 ;TYPE:Internal Bridge ;WIDTH:0.4 ;HEIGHT:0.4 G1 F2372 M106 S255 G1 X121.186 Y95.049 E.02717 G1 X121.823 Y95.049 E.03325 G1 X121.021 Y94.248 E.05923 G1 X121.021 Y93.611 E.03325 G1 X122.459 Y95.049 E.10625 G1 X123.095 Y95.049 E.03325 G1 X121.021 Y92.975 E.15327 G1 X121.021 Y92.338 E.03325 G1 X123.732 Y95.049 E.20029 G1 X124.368 Y95.049 E.03325 G1 X121.021 Y91.702 E.24731 G1 X121.021 Y91.066 E.03325 G1 X125.005 Y95.049 E.29433 G1 X125.641 Y95.049 E.03325 G1 X121.021 Y90.429 E.34135 G1 X121.021 Y89.793 E.03325 G1 X126.277 Y95.049 E.38837 G1 X126.914 Y95.049 E.03325 G1 X121.021 Y89.156 E.43539 G1 X121.021 Y88.728 E.0224 G1 X121.177 Y88.706 E.00821 G1 X121.192 Y88.691 E.00111 G1 X127.55 Y95.049 E.4698 G1 X128.187 Y95.049 E.03325 G1 X121.51 Y88.373 E.49331 G1 X121.828 Y88.054 E.02351 G1 X128.823 Y95.049 E.51682 G1 X128.972 Y95.049 E.00777 G1 X128.979 Y95.057 E.00054 G1 X128.979 Y94.569 E.02548 G1 X124.219 Y89.809 E.35171 G1 X124.537 Y89.49 E.02351 G1 X128.979 Y93.932 E.3282 G1 X128.979 Y93.296 E.03325 G1 X124.855 Y89.172 E.30469 G1 X125.173 Y88.854 E.02351 G1 X128.979 Y92.66 E.28118 G1 X128.979 Y92.023 E.03325 G1 X125.492 Y88.536 E.25767 G1 X125.81 Y88.218 E.02351 G1 X128.979 Y91.387 E.23416 G1 X128.979 Y90.75 E.03325 G1 X128.2 Y89.972 E.05752 G1 X128.519 Y89.654 E.02351 G1 X129.181 Y90.317 E.04897 ;PATH_TASK id=1675 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4.8 F720 G1 X129 Y87.274 Z4.8 F21000 G1 Z4.2 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 ;HEIGHT:0.2 G1 F2372 M106 S252 G1 X129 Y85.274 E.0677 G1 X126.275 Y88 E.13048 G1 X125.848 Y87.573 E.02043 G1 X123.939 Y89.483 E.09139 G1 X122.293 Y87.837 E.07878 G1 X127.63 Y82.5 E.2555 G1 X123.485 Y82.5 E.1403 G1 X121 Y84.985 E.11899 G1 X121 Y86.985 E.0677 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:4.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;4.4 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;4.4 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1676 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 M486 S0 G1 Z5 F720 G1 X120.654 Y96.32 Z5 F21000 G1 Z4.4 F720 M73 P94 R2 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F2231 G1 X120.654 Y82.154 E.47952 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y96.32 E.47952 G1 X120.694 Y96.32 E.29289 ;PATH_TASK id=1677 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 M204 T3000 G1 X120.694 Y96.363 F21000 G1 X120.611 Y96.363 G1 X120.225 Y96.749 M204 P3000 ;TYPE:Outer wall G1 F2231 G1 X120.225 Y81.725 E.50853 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y96.749 E.50853 G1 X120.265 Y96.749 E.3219 ;PATH_TASK id=1678 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z5 F720 G1 X120.611 Y96.363 Z5 F21000 G1 X120.611 Y89.781 G1 X121.137 Y89.781 G1 Z4.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.539932 G1 F2231 G1 X121.075 Y89.781 E.00257 G1 X121.043 Y89.835 E.00257 G1 X121.075 Y89.888 E.00257 G1 X121.137 Y89.888 E.00257 G1 X121.148 Y89.869 E.00091 ;PATH_TASK id=1679 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z5 F720 G1 X121 Y82.985 Z5 F21000 G1 Z4.4 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F2231 G1 X121 Y84.985 E.0677 G1 X123.485 Y82.5 E.11899 G1 X127.63 Y82.5 E.1403 G1 X121 Y89.13 E.31741 G1 X121 Y89.382 E.00853 G1 X124.892 Y89.382 E.13177 G1 X129 Y85.274 E.19665 G1 X129 Y87.274 E.0677 ;PATH_TASK id=1680 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z5 F720 G1 X129.184 Y92.47 Z5 F21000 G1 Z4.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.449999 G1 F2231 G1 X127.488 Y94.166 E.08118 G1 X126.912 Y94.166 E.01949 G1 X129 Y92.078 E.09997 G1 X129 Y91.502 E.01949 G1 X126.336 Y94.166 E.12753 G1 X125.761 Y94.166 E.01949 G1 X129 Y90.926 E.15508 G1 X129 Y90.351 E.01949 G1 X125.185 Y94.166 E.18264 G1 X124.609 Y94.166 E.01949 G1 X128.986 Y89.79 E.20951 G1 X128.41 Y89.79 E.01949 G1 X124.034 Y94.166 E.20951 G1 X123.458 Y94.166 E.01949 G1 X127.835 Y89.79 E.20951 G1 X127.259 Y89.79 E.01949 G1 X122.882 Y94.166 E.20951 G1 X122.307 Y94.166 E.01949 G1 X126.683 Y89.79 E.20951 G1 X126.107 Y89.79 E.01949 G1 X121.731 Y94.166 E.20951 G1 X121.155 Y94.166 E.01949 G1 X125.532 Y89.79 E.20951 G1 X124.956 Y89.79 E.01949 G1 X121 Y93.746 E.1894 G1 X121 Y93.17 E.01949 G1 X124.38 Y89.79 E.16184 G1 X123.805 Y89.79 E.01949 G1 X121 Y92.595 E.13428 G1 X121 Y92.019 E.01949 G1 X123.229 Y89.79 E.10672 G1 X122.653 Y89.79 E.01949 G1 X121 Y91.443 E.07916 G1 X121 Y90.868 E.01949 G1 X122.261 Y89.606 E.06038 ;PATH_TASK id=1681 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z5 F720 G1 X127.941 Y94.098 Z5 F21000 G1 Z4.4 F720 G1 E.7 F1500 ;WIDTH:0.5873 G1 F2231 G1 X128.871 Y94.098 E.04207 G1 X128.871 Y93.168 E.04207 G1 X127.97 Y94.069 E.05768 ;PATH_TASK id=1682 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z5 F720 G1 X129.185 Y95.39 Z5 F21000 G1 Z4.4 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.423113 G1 F2231 G1 X128.416 Y96.159 E.03437 ;PATH_TASK id=1683 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X127.879 Y96.159 F21000 G1 F2231 G1 X129.185 Y94.852 E.05841 ;PATH_TASK id=1684 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X129.111 Y94.389 F21000 G1 F2231 G1 X127.341 Y96.159 E.07914 ;PATH_TASK id=1685 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X126.803 Y96.159 F21000 G1 F2231 G1 X128.573 Y94.389 E.07914 ;PATH_TASK id=1686 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X128.036 Y94.389 F21000 G1 F2231 G1 X126.266 Y96.159 E.07914 ;PATH_TASK id=1687 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X125.728 Y96.159 F21000 G1 F2231 G1 X127.498 Y94.389 E.07914 ;PATH_TASK id=1688 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X126.96 Y94.389 F21000 G1 F2231 G1 X125.19 Y96.159 E.07914 ;PATH_TASK id=1689 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X124.653 Y96.159 F21000 G1 F2231 G1 X126.423 Y94.389 E.07914 ;PATH_TASK id=1690 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X125.885 Y94.389 F21000 G1 F2231 G1 X124.115 Y96.159 E.07914 ;PATH_TASK id=1691 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X123.577 Y96.159 F21000 G1 F2231 G1 X125.347 Y94.389 E.07914 ;PATH_TASK id=1692 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X124.81 Y94.389 F21000 G1 F2231 G1 X123.04 Y96.159 E.07914 ;PATH_TASK id=1693 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X122.502 Y96.159 F21000 G1 F2231 G1 X124.272 Y94.389 E.07914 ;PATH_TASK id=1694 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X123.734 Y94.389 F21000 G1 F2231 G1 X121.964 Y96.159 E.07914 ;PATH_TASK id=1695 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X121.427 Y96.159 F21000 G1 F2231 G1 X123.197 Y94.389 E.07914 ;PATH_TASK id=1696 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X122.659 Y94.389 F21000 G1 F2231 G1 X120.889 Y96.159 E.07914 ;PATH_TASK id=1697 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X120.815 Y95.695 F21000 G1 F2231 G1 X122.121 Y94.389 E.05841 ;PATH_TASK id=1698 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X121.584 Y94.389 F21000 G1 F2231 G1 X120.815 Y95.157 E.03437 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:4.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;4.6 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;4.6 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1699 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 M486 S0 G1 Z5.2 F720 G1 X120.654 Y95.186 Z5.2 F21000 G1 Z4.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F2101 G1 X120.654 Y82.154 E.44113 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y95.186 E.44113 G1 X120.694 Y95.186 E.29289 ;PATH_TASK id=1700 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 M204 T3000 G1 X120.694 Y95.229 F21000 G1 X120.611 Y95.229 G1 X120.611 Y95.229 G1 X120.225 Y95.614 M204 P3000 ;TYPE:Outer wall G1 F2101 G1 X120.225 Y81.725 E.47014 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y95.614 E.47014 G1 X120.265 Y95.614 E.3219 ;PATH_TASK id=1701 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z5.2 F720 G1 X120.611 Y95.229 Z5.2 F21000 G1 X120.611 Y92.95 G1 X121.122 Y92.95 G1 Z4.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.513012 G1 F2101 G1 X121.063 Y92.95 E.0023 G1 X121.033 Y93 E.0023 G1 X121.063 Y93.051 E.0023 G1 X121.122 Y93.051 E.0023 G1 X121.131 Y93.035 E.00073 ;PATH_TASK id=1702 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z5.2 F720 G1 X126.868 Y88.657 Z5.2 F21000 G1 Z4.6 F720 G1 E.7 F1500 ;WIDTH:0.45 G1 F2101 G1 X129 Y90.79 E.10207 G1 X129 Y91.365 E.01949 G1 X126.476 Y88.84 E.12086 G1 X125.9 Y88.84 E.01949 G1 X129 Y91.941 E.14842 G1 X129 Y92.517 E.01949 G1 X125.324 Y88.84 E.17598 G1 X124.749 Y88.84 E.01949 G1 X128.94 Y93.032 E.20064 G1 X128.364 Y93.032 E.01949 G1 X124.173 Y88.84 E.20064 G1 X123.597 Y88.84 E.01949 G1 X127.789 Y93.032 E.20064 G1 X127.213 Y93.032 E.01949 G1 X123.021 Y88.84 E.20064 G1 X122.446 Y88.84 E.01949 G1 X126.637 Y93.032 E.20064 G1 X126.062 Y93.032 E.01949 G1 X121.87 Y88.84 E.20064 G1 X121.294 Y88.84 E.01949 G1 X125.486 Y93.032 E.20064 G1 X124.91 Y93.032 E.01949 G1 X121 Y89.121 E.1872 G1 X121 Y89.697 E.01949 G1 X124.334 Y93.032 E.15964 G1 X123.759 Y93.032 E.01949 G1 X121 Y90.273 E.13208 G1 X121 Y90.848 E.01949 G1 X123.183 Y93.032 E.10452 G1 X122.607 Y93.032 E.01949 G1 X121 Y91.424 E.07696 G1 X121 Y92 E.01949 G1 X122.215 Y93.215 E.05817 ;PATH_TASK id=1703 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z5.2 F720 G1 X129.185 Y94.023 Z5.2 F21000 G1 Z4.6 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.423113 G1 F2101 G1 X128.416 Y93.254 E.03437 ;PATH_TASK id=1704 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X127.879 Y93.254 F21000 G1 F2101 G1 X129.185 Y94.561 E.05841 ;PATH_TASK id=1705 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X129.111 Y95.024 F21000 G1 F2101 G1 X127.341 Y93.254 E.07914 ;PATH_TASK id=1706 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X126.803 Y93.254 F21000 G1 F2101 G1 X128.573 Y95.024 E.07914 ;PATH_TASK id=1707 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X128.036 Y95.024 F21000 G1 F2101 G1 X126.266 Y93.254 E.07914 ;PATH_TASK id=1708 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X125.728 Y93.254 F21000 G1 F2101 G1 X127.498 Y95.024 E.07914 ;PATH_TASK id=1709 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X126.96 Y95.024 F21000 G1 F2101 G1 X125.19 Y93.254 E.07914 ;PATH_TASK id=1710 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X124.653 Y93.254 F21000 G1 F2101 G1 X126.423 Y95.024 E.07914 ;PATH_TASK id=1711 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X125.885 Y95.024 F21000 G1 F2101 G1 X124.115 Y93.254 E.07914 ;PATH_TASK id=1712 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X123.577 Y93.254 F21000 G1 F2101 G1 X125.347 Y95.024 E.07914 ;PATH_TASK id=1713 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X124.81 Y95.024 F21000 G1 F2101 G1 X123.04 Y93.254 E.07914 ;PATH_TASK id=1714 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X122.502 Y93.254 F21000 G1 F2101 G1 X124.272 Y95.024 E.07914 ;PATH_TASK id=1715 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X123.734 Y95.024 F21000 G1 F2101 G1 X121.964 Y93.254 E.07914 ;PATH_TASK id=1716 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X121.427 Y93.254 F21000 G1 F2101 G1 X123.197 Y95.024 E.07914 ;PATH_TASK id=1717 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X122.659 Y95.024 F21000 G1 F2101 G1 X120.889 Y93.254 E.07914 ;PATH_TASK id=1718 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X120.815 Y93.718 F21000 G1 F2101 G1 X122.121 Y95.024 E.05841 ;PATH_TASK id=1719 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X121.584 Y95.024 F21000 G1 F2101 G1 X120.815 Y94.256 E.03437 ;PATH_TASK id=1720 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z5.2 F720 G1 X128.939 Y90.441 Z5.2 F21000 G1 Z4.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.449999 G1 F2101 G1 X128.939 Y88.84 E.05416 G1 X127.339 Y88.84 E.05416 G1 X128.911 Y90.412 E.07524 ;PATH_TASK id=1721 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X128.504 Y89.252 F21000 ;WIDTH:0.573194 G1 F2101 G1 X128.438 Y89.252 E.00292 G1 X128.404 Y89.309 E.00292 G1 X128.438 Y89.367 E.00292 G1 X128.504 Y89.367 E.00292 G1 X128.517 Y89.344 E.00116 ;PATH_TASK id=1722 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X127.842 Y88.433 F21000 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F2101 G1 X125.842 Y88.433 E.0677 G1 X129 Y85.274 E.15122 G1 X129 Y82.5 E.09393 G1 X127.63 Y82.5 E.04638 G1 X121.696 Y88.433 E.28405 G1 X121 Y88.433 E.02359 G1 X121 Y84.985 E.11671 G1 X123.485 Y82.5 E.11899 G1 X121.485 Y82.5 E.0677 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:4.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;4.8 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;4.8 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1723 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 M486 S0 G1 Z5.4 F720 G1 X120.654 Y94.052 Z5.4 F21000 G1 Z4.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F2018 G1 X120.654 Y82.154 E.40273 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y94.052 E.40273 G1 X120.694 Y94.052 E.29289 ;PATH_TASK id=1724 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 M204 T3000 G1 X120.694 Y94.094 F21000 G1 X120.611 Y94.094 G1 X120.225 Y94.48 M204 P3000 ;TYPE:Outer wall G1 F2018 G1 X120.225 Y81.725 E.43174 G1 X129.775 Y81.725 E.32326 M73 P94 R1 G1 X129.775 Y94.48 E.43174 G1 X120.265 Y94.48 E.3219 ;PATH_TASK id=1725 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z5.4 F720 G1 X120.611 Y94.094 Z5.4 F21000 G1 X120.611 Y88.968 G1 X121.061 Y88.968 G1 Z4.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill G1 F2018 G1 X128.939 Y88.968 E.26669 G1 X128.939 Y87.891 E.03643 G1 X121.061 Y87.891 E.26669 G1 X121.061 Y88.928 E.03508 ;PATH_TASK id=1726 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X121.431 Y88.597 F21000 ;WIDTH:0.377571 G1 F2018 G1 X128.569 Y88.597 E.1986 G1 X128.569 Y88.262 E.00931 G1 X121.431 Y88.262 E.1986 G1 X121.431 Y88.557 E.0082 ;PATH_TASK id=1727 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z5.4 F720 G1 X121.485 Y82.5 Z5.4 F21000 G1 Z4.8 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F2018 G1 X123.485 Y82.5 E.0677 G1 X121 Y84.985 E.11899 G1 X121 Y87.484 E.08459 G1 X122.646 Y87.484 E.05572 G1 X127.63 Y82.5 E.23862 G1 X129 Y82.5 E.04638 G1 X129 Y85.274 E.09393 G1 X126.791 Y87.484 E.10579 G1 X128.791 Y87.484 E.0677 ;PATH_TASK id=1728 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z5.4 F720 G1 X128.401 Y93.89 Z5.4 F21000 G1 Z4.8 F720 M73 P95 R1 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.43023 G1 F2018 G1 X129.185 Y93.106 E.03571 ;PATH_TASK id=1729 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X129.185 Y92.559 F21000 G1 F2018 G1 X127.853 Y93.89 E.06065 ;PATH_TASK id=1730 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X127.306 Y93.89 F21000 G1 F2018 G1 X129.185 Y92.011 E.0856 ;PATH_TASK id=1731 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X129.185 Y91.463 F21000 G1 F2018 G1 X126.758 Y93.89 E.11055 ;PATH_TASK id=1732 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X126.21 Y93.89 F21000 G1 F2018 G1 X129.185 Y90.915 E.13549 ;PATH_TASK id=1733 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X129.185 Y90.368 F21000 G1 F2018 G1 X125.662 Y93.89 E.16044 ;PATH_TASK id=1734 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X125.115 Y93.89 F21000 G1 F2018 G1 X129.185 Y89.82 E.18539 ;PATH_TASK id=1735 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X129.185 Y89.272 F21000 G1 F2018 G1 X124.567 Y93.89 E.21033 ;PATH_TASK id=1736 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X124.019 Y93.89 F21000 G1 F2018 G1 X128.719 Y89.19 E.21406 ;PATH_TASK id=1737 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X128.172 Y89.19 F21000 G1 F2018 G1 X123.472 Y93.89 E.21406 ;PATH_TASK id=1738 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X122.924 Y93.89 F21000 G1 F2018 G1 X127.624 Y89.19 E.21406 ;PATH_TASK id=1739 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X127.076 Y89.19 F21000 G1 F2018 G1 X122.376 Y93.89 E.21406 ;PATH_TASK id=1740 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X121.828 Y93.89 F21000 G1 F2018 G1 X126.528 Y89.19 E.21406 ;PATH_TASK id=1741 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X125.981 Y89.19 F21000 G1 F2018 G1 X121.281 Y93.89 E.21406 ;PATH_TASK id=1742 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X120.815 Y93.808 F21000 G1 F2018 G1 X125.433 Y89.19 E.21033 ;PATH_TASK id=1743 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X124.885 Y89.19 F21000 G1 F2018 G1 X120.815 Y93.26 E.18538 ;PATH_TASK id=1744 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X120.815 Y92.713 F21000 G1 F2018 G1 X124.337 Y89.19 E.16043 ;PATH_TASK id=1745 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X123.79 Y89.19 F21000 G1 F2018 G1 X120.815 Y92.165 E.13549 ;PATH_TASK id=1746 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X120.815 Y91.617 F21000 G1 F2018 G1 X123.242 Y89.19 E.11054 ;PATH_TASK id=1747 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X122.694 Y89.19 F21000 G1 F2018 G1 X120.815 Y91.069 E.08559 ;PATH_TASK id=1748 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X120.815 Y90.522 F21000 G1 F2018 G1 X122.146 Y89.19 E.06065 ;PATH_TASK id=1749 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X121.599 Y89.19 F21000 G1 F2018 G1 X120.815 Y89.974 E.0357 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:5 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;5 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;5 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1750 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 M486 S0 G1 Z5.6 F720 G1 X120.654 Y89.987 Z5.6 F21000 G1 Z5 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F1301 G1 X120.654 Y82.154 E.26517 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y89.987 E.26517 G1 X120.694 Y89.987 E.29289 ;PATH_TASK id=1751 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 M204 T3000 G1 X120.694 Y90.03 F21000 G1 X120.611 Y90.03 G1 X120.611 Y90.03 G1 X120.225 Y90.416 M204 P3000 ;TYPE:Outer wall G1 F1301 G1 X120.225 Y81.725 E.29418 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y90.416 E.29418 G1 X120.265 Y90.416 E.3219 ;PATH_TASK id=1752 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z5.6 F720 G1 X120.611 Y90.03 Z5.6 F21000 G1 X120.611 Y88.019 G1 X121.061 Y88.019 G1 Z5 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill G1 F1301 G1 X128.939 Y88.019 E.26669 G1 X128.939 Y86.942 E.03643 G1 X121.061 Y86.942 E.26669 G1 X121.061 Y87.979 E.03508 ;PATH_TASK id=1753 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X121.431 Y87.648 F21000 ;WIDTH:0.377573 G1 F1301 G1 X128.569 Y87.648 E.1986 G1 X128.569 Y87.313 E.00931 G1 X121.431 Y87.313 E.1986 G1 X121.431 Y87.608 E.0082 ;PATH_TASK id=1754 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z5.6 F720 G1 X125.74 Y86.535 Z5.6 F21000 G1 Z5 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F1301 G1 X127.74 Y86.535 E.0677 G1 X129 Y85.274 E.06035 G1 X129 Y82.5 E.09393 G1 X127.63 Y82.5 E.04638 G1 X123.595 Y86.535 E.19319 G1 X121 Y86.535 E.08784 G1 X121 Y84.985 E.05246 G1 X123.485 Y82.5 E.11899 G1 X121.485 Y82.5 E.0677 ;PATH_TASK id=1755 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z5.6 F720 G1 X128.387 Y88.241 Z5.6 F21000 G1 Z5 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.43696 G1 F1301 G1 X129.185 Y89.039 E.03699 ;PATH_TASK id=1756 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X129.185 Y89.597 F21000 G1 F1301 G1 X127.83 Y88.241 E.06281 ;PATH_TASK id=1757 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X127.272 Y88.241 F21000 G1 F1301 G1 X128.857 Y89.826 E.07344 ;PATH_TASK id=1758 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X128.3 Y89.826 F21000 G1 F1301 G1 X126.715 Y88.241 E.07344 ;PATH_TASK id=1759 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X126.158 Y88.241 F21000 G1 F1301 G1 X127.743 Y89.826 E.07344 ;PATH_TASK id=1760 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X127.186 Y89.826 F21000 G1 F1301 G1 X125.601 Y88.241 E.07344 ;PATH_TASK id=1761 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X125.043 Y88.241 F21000 G1 F1301 G1 X126.628 Y89.826 E.07344 ;PATH_TASK id=1762 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X126.071 Y89.826 F21000 G1 F1301 G1 X124.486 Y88.241 E.07344 ;PATH_TASK id=1763 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X123.929 Y88.241 F21000 G1 F1301 G1 X125.514 Y89.826 E.07344 ;PATH_TASK id=1764 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X124.957 Y89.826 F21000 G1 F1301 G1 X123.372 Y88.241 E.07344 ;PATH_TASK id=1765 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X122.814 Y88.241 F21000 G1 F1301 G1 X124.399 Y89.826 E.07344 ;PATH_TASK id=1766 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X123.842 Y89.826 F21000 G1 F1301 G1 X122.257 Y88.241 E.07344 ;PATH_TASK id=1767 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X121.7 Y88.241 F21000 G1 F1301 G1 X123.285 Y89.826 E.07344 ;PATH_TASK id=1768 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X122.727 Y89.826 F21000 G1 F1301 G1 X121.143 Y88.241 E.07344 ;PATH_TASK id=1769 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X120.815 Y88.471 F21000 G1 F1301 G1 X122.17 Y89.826 E.0628 ;PATH_TASK id=1770 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X121.613 Y89.826 F21000 G1 F1301 G1 X120.815 Y89.028 E.03698 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 M106 S255 ;LAYER_CHANGE ;Z:5.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;5.2 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;5.2 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1771 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 M486 S0 G1 Z5.8 F720 G1 X120.654 Y89.038 Z5.8 F21000 G1 Z5.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F1200 G1 X120.654 Y82.154 E.23304 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y89.038 E.23304 G1 X120.694 Y89.038 E.29289 ;PATH_TASK id=1772 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 M204 T3000 G1 X120.694 Y89.081 F21000 G1 X120.611 Y89.081 G1 X120.225 Y89.467 M204 P3000 ;TYPE:Outer wall G1 F1200 G1 X120.225 Y81.725 E.26205 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y89.467 E.26205 G1 X120.265 Y89.467 E.3219 ;PATH_TASK id=1773 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z5.8 F720 G1 X120.611 Y89.081 Z5.8 F21000 G1 X120.611 Y87.07 G1 X121.061 Y87.07 G1 Z5.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill G1 F1200 G1 X128.939 Y87.07 E.26669 G1 X128.939 Y85.993 E.03643 G1 X121.061 Y85.993 E.26669 G1 X121.061 Y87.03 E.03508 ;PATH_TASK id=1774 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X121.431 Y86.699 F21000 ;WIDTH:0.377572 G1 F1200 G1 X128.569 Y86.699 E.1986 G1 X128.569 Y86.364 E.00931 G1 X121.431 Y86.364 E.1986 G1 X121.431 Y86.659 E.0082 ;PATH_TASK id=1775 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X122.268 Y85.586 F21000 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F1200 G1 X121 Y85.586 E.04292 G1 X121 Y84.854 E.02477 G3 X121.891 Y83.601 I2.456 J.803 E.05286 G1 X123.978 Y82.5 E.07987 G1 X128.123 Y82.5 E.1403 G1 X126.036 Y83.601 E.07987 G1 X125.544 Y84.094 E.02358 G1 X124.761 Y85.586 E.05705 G1 X126.761 Y85.586 E.0677 ;PATH_TASK id=1776 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z5.8 F720 G1 X128.387 Y88.877 Z5.8 F21000 G1 Z5.2 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.43696 G1 F1200 G1 X129.185 Y88.079 E.03699 ;PATH_TASK id=1777 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X129.185 Y87.521 F21000 G1 F1200 G1 X127.83 Y88.877 E.06281 ;PATH_TASK id=1778 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X127.272 Y88.877 F21000 G1 F1200 G1 X128.857 Y87.292 E.07344 ;PATH_TASK id=1779 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X128.3 Y87.292 F21000 G1 F1200 G1 X126.715 Y88.877 E.07344 ;PATH_TASK id=1780 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X126.158 Y88.877 F21000 G1 F1200 G1 X127.743 Y87.292 E.07344 ;PATH_TASK id=1781 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X127.186 Y87.292 F21000 G1 F1200 G1 X125.601 Y88.877 E.07344 ;PATH_TASK id=1782 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X125.043 Y88.877 F21000 G1 F1200 G1 X126.628 Y87.292 E.07344 ;PATH_TASK id=1783 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X126.071 Y87.292 F21000 G1 F1200 G1 X124.486 Y88.877 E.07344 ;PATH_TASK id=1784 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X123.929 Y88.877 F21000 G1 F1200 G1 X125.514 Y87.292 E.07344 ;PATH_TASK id=1785 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X124.957 Y87.292 F21000 G1 F1200 G1 X123.372 Y88.877 E.07344 ;PATH_TASK id=1786 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X122.814 Y88.877 F21000 G1 F1200 G1 X124.399 Y87.292 E.07344 ;PATH_TASK id=1787 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X123.842 Y87.292 F21000 G1 F1200 G1 X122.257 Y88.877 E.07344 ;PATH_TASK id=1788 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X121.7 Y88.877 F21000 G1 F1200 G1 X123.285 Y87.292 E.07344 ;PATH_TASK id=1789 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X122.727 Y87.292 F21000 G1 F1200 G1 X121.143 Y88.877 E.07344 ;PATH_TASK id=1790 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X120.815 Y88.647 F21000 G1 F1200 G1 X122.17 Y87.292 E.0628 ;PATH_TASK id=1791 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X121.613 Y87.292 F21000 G1 F1200 G1 X120.815 Y88.09 E.03698 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:5.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;5.4 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;5.4 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1792 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 M486 S0 G1 Z6 F720 G1 X120.654 Y88.089 Z6 F21000 G1 Z5.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F1200 G1 X120.654 Y82.154 E.20092 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y88.089 E.20092 G1 X120.694 Y88.089 E.29289 ;PATH_TASK id=1793 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 M204 T3000 G1 X120.694 Y88.132 F21000 G1 X120.611 Y88.132 G1 X120.225 Y88.518 M204 P3000 ;TYPE:Outer wall G1 F1200 G1 X120.225 Y81.725 E.22993 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y88.518 E.22993 M73 P96 R1 G1 X120.265 Y88.518 E.3219 ;PATH_TASK id=1794 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z6 F720 G1 X120.611 Y88.132 Z6 F21000 G1 X120.611 Y86.121 G1 X121.061 Y86.121 G1 Z5.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill G1 F1200 G1 X128.939 Y86.121 E.26669 G1 X128.939 Y85.044 E.03643 G1 X121.061 Y85.044 E.26669 G1 X121.061 Y86.081 E.03508 ;PATH_TASK id=1795 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X121.431 Y85.75 F21000 ;WIDTH:0.377572 G1 F1200 G1 X128.569 Y85.75 E.1986 G1 X128.569 Y85.415 E.00931 G1 X121.431 Y85.415 E.1986 G1 X121.431 Y85.71 E.0082 ;PATH_TASK id=1796 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z6 F720 G1 X121.157 Y82.5 Z6 F21000 G1 Z5.4 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F1200 G1 X121 Y82.5 E.00534 G1 X121 Y84.342 E.06236 G1 X121.045 Y84.094 E.00854 G1 X121.891 Y83.247 E.0405 G1 X123.964 Y82.867 E.07132 G1 X124.331 Y82.5 E.0176 G1 X128.476 Y82.5 E.1403 G1 X128.109 Y82.867 E.0176 G1 X126.036 Y83.247 E.07132 G1 X125.19 Y84.094 E.0405 G1 X125.09 Y84.637 E.0187 G1 X127.09 Y84.637 E.0677 ;PATH_TASK id=1797 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z6 F720 G1 X128.387 Y86.343 Z6 F21000 G1 Z5.4 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.43696 G1 F1200 G1 X129.185 Y87.141 E.03699 ;PATH_TASK id=1798 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X129.185 Y87.698 F21000 G1 F1200 G1 X127.83 Y86.343 E.06281 ;PATH_TASK id=1799 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X127.272 Y86.343 F21000 G1 F1200 G1 X128.857 Y87.928 E.07344 ;PATH_TASK id=1800 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X128.3 Y87.928 F21000 G1 F1200 G1 X126.715 Y86.343 E.07344 ;PATH_TASK id=1801 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X126.158 Y86.343 F21000 G1 F1200 G1 X127.743 Y87.928 E.07344 ;PATH_TASK id=1802 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X127.186 Y87.928 F21000 G1 F1200 G1 X125.601 Y86.343 E.07344 ;PATH_TASK id=1803 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X125.043 Y86.343 F21000 G1 F1200 G1 X126.628 Y87.928 E.07344 ;PATH_TASK id=1804 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X126.071 Y87.928 F21000 G1 F1200 G1 X124.486 Y86.343 E.07344 ;PATH_TASK id=1805 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X123.929 Y86.343 F21000 G1 F1200 G1 X125.514 Y87.928 E.07344 ;PATH_TASK id=1806 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X124.957 Y87.928 F21000 G1 F1200 G1 X123.372 Y86.343 E.07344 ;PATH_TASK id=1807 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X122.814 Y86.343 F21000 G1 F1200 G1 X124.399 Y87.928 E.07344 ;PATH_TASK id=1808 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X123.842 Y87.928 F21000 G1 F1200 G1 X122.257 Y86.343 E.07344 ;PATH_TASK id=1809 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X121.7 Y86.343 F21000 G1 F1200 G1 X123.285 Y87.928 E.07344 ;PATH_TASK id=1810 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X122.727 Y87.928 F21000 G1 F1200 G1 X121.143 Y86.343 E.07344 ;PATH_TASK id=1811 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X120.815 Y86.573 F21000 G1 F1200 G1 X122.17 Y87.928 E.0628 ;PATH_TASK id=1812 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X121.613 Y87.928 F21000 G1 F1200 G1 X120.815 Y87.13 E.03698 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:5.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;5.6 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;5.6 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1813 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 M486 S0 G1 Z6.2 F720 G1 X120.654 Y87.14 Z6.2 F21000 G1 Z5.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F1200 G1 X120.654 Y82.154 E.16879 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y87.14 E.16879 G1 X120.694 Y87.14 E.29289 ;PATH_TASK id=1814 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 M204 T3000 G1 X120.694 Y87.183 F21000 G1 X120.611 Y87.183 G1 X120.611 Y87.183 G1 X120.225 Y87.569 M204 P3000 ;TYPE:Outer wall G1 F1200 G1 X120.225 Y81.725 E.1978 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y87.569 E.1978 G1 X120.265 Y87.569 E.3219 ;PATH_TASK id=1815 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z6.2 F720 G1 X120.611 Y87.183 Z6.2 F21000 G1 X120.611 Y85.172 G1 X121.061 Y85.172 G1 Z5.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill G1 F1200 G1 X128.939 Y85.172 E.26669 G1 X128.939 Y84.269 E.03056 G1 X121.061 Y84.269 E.26669 G1 X121.061 Y85.132 E.02921 ;PATH_TASK id=1816 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X121.512 Y84.72 F21000 ;WIDTH:0.538826 G1 F1200 G1 X128.448 Y84.72 E.286 ;PATH_TASK id=1817 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X128.533 Y83.861 F21000 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F1200 G1 X129 Y83.861 E.01583 G1 X129 Y82.5 E.0461 G1 X128.83 Y82.5 E.00577 G1 X128.109 Y83.221 E.03453 G1 X126.036 Y82.894 E.07102 G1 X125.069 Y83.861 E.04631 G1 X121 Y83.861 E.13774 G1 X121 Y83.786 E.00257 G1 X121.891 Y82.894 E.04268 G1 X123.964 Y83.221 E.07102 G1 X124.685 Y82.5 E.03453 G1 X122.685 Y82.5 E.0677 ;PATH_TASK id=1818 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z6.2 F720 G1 X128.387 Y86.979 Z6.2 F21000 G1 Z5.6 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.43696 G1 F1200 G1 X129.185 Y86.181 E.03699 ;PATH_TASK id=1819 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X129.185 Y85.623 F21000 G1 F1200 G1 X127.83 Y86.979 E.06281 ;PATH_TASK id=1820 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X127.272 Y86.979 F21000 G1 F1200 G1 X128.857 Y85.394 E.07344 ;PATH_TASK id=1821 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X128.3 Y85.394 F21000 G1 F1200 G1 X126.715 Y86.979 E.07344 ;PATH_TASK id=1822 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X126.158 Y86.979 F21000 G1 F1200 G1 X127.743 Y85.394 E.07344 ;PATH_TASK id=1823 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X127.186 Y85.394 F21000 G1 F1200 G1 X125.601 Y86.979 E.07344 ;PATH_TASK id=1824 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X125.043 Y86.979 F21000 G1 F1200 G1 X126.628 Y85.394 E.07344 ;PATH_TASK id=1825 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X126.071 Y85.394 F21000 G1 F1200 G1 X124.486 Y86.979 E.07344 ;PATH_TASK id=1826 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X123.929 Y86.979 F21000 G1 F1200 G1 X125.514 Y85.394 E.07344 ;PATH_TASK id=1827 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X124.957 Y85.394 F21000 G1 F1200 G1 X123.372 Y86.979 E.07344 ;PATH_TASK id=1828 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X122.814 Y86.979 F21000 G1 F1200 G1 X124.399 Y85.394 E.07344 ;PATH_TASK id=1829 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X123.842 Y85.394 F21000 G1 F1200 G1 X122.257 Y86.979 E.07344 ;PATH_TASK id=1830 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X121.7 Y86.979 F21000 G1 F1200 G1 X123.285 Y85.394 E.07344 ;PATH_TASK id=1831 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X122.727 Y85.394 F21000 G1 F1200 G1 X121.143 Y86.979 E.07344 ;PATH_TASK id=1832 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X120.815 Y86.749 F21000 G1 F1200 G1 X122.17 Y85.394 E.0628 ;PATH_TASK id=1833 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X121.613 Y85.394 F21000 G1 F1200 G1 X120.815 Y86.192 E.03698 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:5.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;5.8 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;5.8 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1834 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 M486 S0 G1 Z6.4 F720 G1 X120.654 Y86.191 Z6.4 F21000 G1 Z5.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F1200 G1 X120.654 Y82.154 E.13667 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y86.191 E.13667 G1 X120.694 Y86.191 E.29289 ;PATH_TASK id=1835 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 M204 T3000 G1 X120.694 Y86.234 F21000 G1 X120.611 Y86.234 G1 X120.611 Y86.234 G1 X120.225 Y86.62 M204 P3000 ;TYPE:Outer wall G1 F1200 G1 X120.225 Y81.725 E.16568 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y86.62 E.16568 G1 X120.265 Y86.62 E.3219 ;PATH_TASK id=1836 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z6.4 F720 G1 X120.611 Y86.234 Z6.4 F21000 G1 X120.611 Y84.245 G1 X121.038 Y84.245 G1 Z5.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.403918 G1 F1200 G1 X128.922 Y84.245 E.23668 ;PATH_TASK id=1837 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X128.387 Y84.445 F21000 M204 P2000 ;TYPE:Top surface ;WIDTH:0.43696 G1 F1200 G1 X129.185 Y85.243 E.03699 ;PATH_TASK id=1838 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X129.185 Y85.8 F21000 G1 F1200 G1 X127.83 Y84.445 E.06281 ;PATH_TASK id=1839 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X127.272 Y84.445 F21000 G1 F1200 G1 X128.857 Y86.03 E.07344 ;PATH_TASK id=1840 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X128.3 Y86.03 F21000 G1 F1200 G1 X126.715 Y84.445 E.07344 ;PATH_TASK id=1841 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X126.158 Y84.445 F21000 G1 F1200 G1 X127.743 Y86.03 E.07344 ;PATH_TASK id=1842 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X127.186 Y86.03 F21000 G1 F1200 G1 X125.601 Y84.445 E.07344 ;PATH_TASK id=1843 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X125.043 Y84.445 F21000 G1 F1200 G1 X126.628 Y86.03 E.07344 ;PATH_TASK id=1844 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X126.071 Y86.03 F21000 G1 F1200 G1 X124.486 Y84.445 E.07344 ;PATH_TASK id=1845 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X123.929 Y84.445 F21000 G1 F1200 G1 X125.514 Y86.03 E.07344 ;PATH_TASK id=1846 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X124.957 Y86.03 F21000 G1 F1200 G1 X123.372 Y84.445 E.07344 ;PATH_TASK id=1847 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X122.814 Y84.445 F21000 G1 F1200 G1 X124.399 Y86.03 E.07344 ;PATH_TASK id=1848 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X123.842 Y86.03 F21000 G1 F1200 G1 X122.257 Y84.445 E.07344 ;PATH_TASK id=1849 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X121.7 Y84.445 F21000 G1 F1200 G1 X123.285 Y86.03 E.07344 ;PATH_TASK id=1850 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X122.727 Y86.03 F21000 G1 F1200 G1 X121.143 Y84.445 E.07344 ;PATH_TASK id=1851 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X120.815 Y84.674 F21000 G1 F1200 G1 X122.17 Y86.03 E.0628 ;PATH_TASK id=1852 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X121.613 Y86.03 F21000 G1 F1200 G1 X120.815 Y85.232 E.03698 ;PATH_TASK id=1853 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z6.4 F720 G1 X122.665 Y83.861 Z6.4 F21000 G1 Z5.8 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F1200 G1 X124.665 Y83.861 E.0677 G1 X123.964 Y83.16 E.03358 G1 X121.891 Y82.955 E.07049 G1 X121.436 Y82.5 E.0218 G1 X125.581 Y82.5 E.1403 G1 X126.036 Y82.955 E.0218 G1 X128.109 Y83.16 E.07049 G1 X128.81 Y83.861 E.03358 G1 X129 Y83.861 E.00643 G1 X129 Y82.5 E.0461 G1 X128.552 Y82.5 E.01516 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;6 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;6 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1854 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 M486 S0 G1 Z6.6 F720 G1 X120.654 Y85.242 Z6.6 F21000 G1 Z6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F1200 G1 X120.654 Y82.154 E.10454 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y85.242 E.10454 G1 X120.694 Y85.242 E.29289 ;PATH_TASK id=1855 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 M204 T3000 G1 X120.694 Y85.285 F21000 G1 X120.611 Y85.285 G1 X120.611 Y85.285 G1 X120.225 Y85.671 M204 P3000 ;TYPE:Outer wall G1 F1200 G1 X120.225 Y81.725 E.13355 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y85.671 E.13355 G1 X120.265 Y85.671 E.3219 ;PATH_TASK id=1856 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z6.6 F720 G1 X120.611 Y85.285 Z6.6 F21000 G1 X120.611 Y83.71 G1 X121 Y83.71 G1 Z6 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F1200 G1 X121 Y82.5 E.04096 G1 X121.789 Y82.5 E.02674 M73 P97 R1 G1 X121.891 Y82.601 E.00487 G1 X123.964 Y83.513 E.07665 G1 X124.312 Y83.861 E.01666 G1 X128.457 Y83.861 E.1403 G1 X128.109 Y83.513 E.01666 G1 X126.036 Y82.601 E.07665 G1 X125.934 Y82.5 E.00487 G1 X123.934 Y82.5 E.0677 ;PATH_TASK id=1857 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z6.6 F720 G1 X128.394 Y85.081 Z6.6 F21000 G1 Z6 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.433766 G1 F1200 G1 X129.185 Y84.289 E.03638 ;PATH_TASK id=1858 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X128.838 Y84.084 F21000 G1 F1200 G1 X127.841 Y85.081 E.04582 ;PATH_TASK id=1859 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X127.288 Y85.081 F21000 G1 F1200 G1 X128.285 Y84.084 E.04582 ;PATH_TASK id=1860 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X127.732 Y84.084 F21000 G1 F1200 G1 X126.735 Y85.081 E.04582 ;PATH_TASK id=1861 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X126.183 Y85.081 F21000 G1 F1200 G1 X127.18 Y84.084 E.04582 ;PATH_TASK id=1862 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X126.627 Y84.084 F21000 G1 F1200 G1 X125.63 Y85.081 E.04582 ;PATH_TASK id=1863 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X125.077 Y85.081 F21000 G1 F1200 G1 X126.074 Y84.084 E.04582 ;PATH_TASK id=1864 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X125.521 Y84.084 F21000 G1 F1200 G1 X124.524 Y85.081 E.04582 ;PATH_TASK id=1865 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X123.972 Y85.081 F21000 G1 F1200 G1 X124.969 Y84.084 E.04582 ;PATH_TASK id=1866 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X124.416 Y84.084 F21000 G1 F1200 G1 X123.419 Y85.081 E.04582 ;PATH_TASK id=1867 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X122.866 Y85.081 F21000 G1 F1200 G1 X123.863 Y84.084 E.04582 ;PATH_TASK id=1868 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X123.31 Y84.084 F21000 G1 F1200 G1 X122.314 Y85.081 E.04582 ;PATH_TASK id=1869 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X121.761 Y85.081 F21000 G1 F1200 G1 X122.758 Y84.084 E.04582 ;PATH_TASK id=1870 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X122.205 Y84.084 F21000 G1 F1200 G1 X121.208 Y85.081 E.04582 ;PATH_TASK id=1871 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X120.815 Y84.921 F21000 G1 F1200 G1 X121.652 Y84.084 E.03848 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:6.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;6.2 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;6.2 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1872 conformal=0 surface=-1 source_layer=30 shell_offset=-1.000000 M486 S0 G1 Z6.8 F720 G1 X120.654 Y84.293 Z6.8 F21000 G1 Z6.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F1200 G1 X120.654 Y82.154 E.07242 G1 X129.346 Y82.154 E.29424 G1 X129.346 Y84.293 E.07242 G1 X120.694 Y84.293 E.29289 ;PATH_TASK id=1873 conformal=0 surface=-1 source_layer=30 shell_offset=-1.000000 M204 T3000 G1 X120.694 Y84.336 F21000 G1 X120.611 Y84.336 G1 X120.225 Y84.722 M204 P3000 ;TYPE:Outer wall G1 F1200 G1 X120.225 Y81.725 E.10143 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y84.722 E.10143 G1 X120.265 Y84.722 E.3219 ;PATH_TASK id=1874 conformal=0 surface=-1 source_layer=30 shell_offset=-1.000000 M204 T7000 G1 X120.611 Y84.336 F21000 G1 X121.061 Y84.336 G1 X121.061 Y83.886 M204 P6000 ;TYPE:Internal solid infill G1 F1200 G1 X128.939 Y83.886 E.26669 G1 X128.939 Y82.561 E.04486 G1 X121.061 Y82.561 E.26669 G1 X121.061 Y83.846 E.0435 ;PATH_TASK id=1875 conformal=0 surface=-1 source_layer=30 shell_offset=-1.000000 G1 X121.494 Y83.453 F21000 ;WIDTH:0.502014 G1 F1200 G1 X128.506 Y83.453 E.2677 G1 X128.506 Y82.994 E.01753 G1 X121.494 Y82.994 E.2677 G1 X121.494 Y83.413 E.016 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 M106 S252 ;LAYER_CHANGE ;Z:6.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;6.4 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;6.4 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1876 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 M486 S0 G1 Z7 F720 G1 X120.654 Y82.154 F21000 G1 Z6.394 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F10200 G1 X129.346 Y82.154 E.29421 G1 X129.346 Y84.5 E.07941 G1 X129.346 Y91 Z5.024 E.22485 G1 X129.346 Y94 E.10155 G1 X129.346 Y100.5 Z3.878 E.22341 G1 X129.346 Y103.5 E.10155 G1 X129.346 Y110 Z2.965 E.22218 G1 X129.346 Y113 E.10155 G1 X129.346 Y119.5 Z2.282 E.22123 G1 X129.346 Y122.5 E.10155 G1 X129.346 Y129 Z1.827 E.22056 G1 X129.346 Y132 E.10155 G1 X129.346 Y137.846 Z1.623 E.198 G1 X120.654 Y137.846 E.29421 G1 X120.654 Y132 Z1.827 E.198 G1 X120.654 Y129 E.10155 G1 X120.654 Y122.5 Z2.282 E.22056 G1 X120.654 Y119.5 E.10155 G1 X120.654 Y113 Z2.965 E.22123 G1 X120.654 Y110 E.10155 G1 X120.654 Y103.5 Z3.878 E.22218 G1 X120.654 Y100.5 E.10155 G1 X120.654 Y94 Z5.024 E.22341 G1 X120.654 Y91 E.10155 G1 X120.654 Y84.5 Z6.394 E.22485 G1 X120.654 Y82.194 E.07806 ;PATH_TASK id=1877 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 M204 T3000 G1 Z6.994 F720 G1 X120.611 Y82.194 F21000 G1 X120.611 Y82.111 G1 X120.225 Y81.725 G1 Z6.394 F720 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y84.5 E.09393 G1 X129.775 Y91 Z5.024 E.22485 G1 X129.775 Y94 E.10155 G1 X129.775 Y100.5 Z3.878 E.22341 G1 X129.775 Y103.5 E.10155 G1 X129.775 Y110 Z2.965 E.22218 G1 X129.775 Y113 E.10155 G1 X129.775 Y119.5 Z2.282 E.22123 G1 X129.775 Y122.5 E.10155 G1 X129.775 Y129 Z1.827 E.22056 G1 X129.775 Y132 E.10155 G1 X129.775 Y138.275 Z1.608 E.21253 G1 X120.225 Y138.275 E.32326 G1 X120.225 Y132 Z1.827 E.21253 G1 X120.225 Y129 E.10155 G1 X120.225 Y122.5 Z2.282 E.22056 G1 X120.225 Y119.5 E.10155 G1 X120.225 Y113 Z2.965 E.22123 G1 X120.225 Y110 E.10155 G1 X120.225 Y103.5 Z3.878 E.22218 G1 X120.225 Y100.5 E.10155 G1 X120.225 Y94 Z5.024 E.22341 G1 X120.225 Y91 E.10155 M73 P97 R0 G1 X120.225 Y84.5 Z6.394 E.22485 G1 X120.225 Y81.765 E.09258 ;PATH_TASK id=1878 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 M204 T7000 G1 E-.7 F2700 G1 Z6.994 F720 G1 X120.611 Y82.111 F21000 G1 X129.032 Y82.111 G1 X129.032 Y82.276 G1 Z6.394 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.46739 G1 F10601.455 G1 X129.032 Y84.5 E.0785 G1 X129.032 Y91 Z5.024 E.23446 G1 X129.032 Y94 E.10588 G1 X129.032 Y100.5 Z3.878 E.23295 G1 X129.032 Y103.5 E.10588 G1 X129.032 Y110 Z2.965 E.23167 G1 X129.032 Y113 E.10588 G1 X129.032 Y119.5 Z2.282 E.23068 G1 X129.032 Y122.5 E.10588 G1 X129.032 Y129 Z1.827 E.22998 G1 X129.032 Y132 E.10588 G1 X129.032 Y137.541 Z1.633 E.19569 ;PATH_TASK id=1878 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X129.032 Y137.541 F21000 G1 F10601.455 G1 X128.608 Y137.541 E.01497 G1 X128.608 Y132 Z1.827 E.19569 G1 X128.608 Y129 E.10588 G1 X128.608 Y122.5 Z2.282 E.22998 G1 X128.608 Y119.5 E.10588 G1 X128.608 Y113 Z2.965 E.23068 G1 X128.608 Y110 E.10588 G1 X128.608 Y103.5 Z3.878 E.23167 G1 X128.608 Y100.5 E.10588 G1 X128.608 Y94 Z5.024 E.23295 G1 X128.608 Y91 E.10588 G1 X128.608 Y84.5 Z6.394 E.23446 G1 X128.608 Y82.459 E.07204 ;PATH_TASK id=1878 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X128.608 Y82.459 F21000 G1 F10601.455 G1 X128.183 Y82.459 E.015 G1 X128.183 Y84.5 E.07204 G1 X128.183 Y91 Z5.024 E.23446 G1 X128.183 Y94 E.10588 G1 X128.183 Y100.5 Z3.878 E.23295 G1 X128.183 Y103.5 E.10588 G1 X128.183 Y110 Z2.965 E.23167 G1 X128.183 Y113 E.10588 G1 X128.183 Y119.5 Z2.282 E.23068 G1 X128.183 Y122.5 E.10588 G1 X128.183 Y129 Z1.827 E.22998 G1 X128.183 Y132 E.10588 G1 X128.183 Y137.541 Z1.633 E.19569 ;PATH_TASK id=1878 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X128.183 Y137.541 F21000 G1 F10601.455 G1 X127.759 Y137.541 E.01497 G1 X127.759 Y132 Z1.827 E.19569 G1 X127.759 Y129 E.10588 G1 X127.759 Y122.5 Z2.282 E.22998 G1 X127.759 Y119.5 E.10588 G1 X127.759 Y113 Z2.965 E.23068 G1 X127.759 Y110 E.10588 G1 X127.759 Y103.5 Z3.878 E.23167 G1 X127.759 Y100.5 E.10588 G1 X127.759 Y94 Z5.024 E.23295 G1 X127.759 Y91 E.10588 G1 X127.759 Y84.5 Z6.394 E.23446 G1 X127.759 Y82.459 E.07204 ;PATH_TASK id=1878 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X127.759 Y82.459 F21000 G1 F10601.455 G1 X127.335 Y82.459 E.01497 G1 X127.335 Y84.5 E.07204 G1 X127.335 Y91 Z5.024 E.23446 G1 X127.335 Y94 E.10588 G1 X127.335 Y100.5 Z3.878 E.23295 G1 X127.335 Y103.5 E.10588 G1 X127.335 Y110 Z2.965 E.23167 G1 X127.335 Y113 E.10588 G1 X127.335 Y119.5 Z2.282 E.23068 G1 X127.335 Y122.5 E.10588 G1 X127.335 Y129 Z1.827 E.22998 G1 X127.335 Y132 E.10588 G1 X127.335 Y137.541 Z1.633 E.19569 ;PATH_TASK id=1878 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X127.335 Y137.541 F21000 G1 F10601.455 G1 X126.91 Y137.541 E.015 G1 X126.91 Y132 Z1.827 E.19569 G1 X126.91 Y129 E.10588 G1 X126.91 Y122.5 Z2.282 E.22998 G1 X126.91 Y119.5 E.10588 G1 X126.91 Y113 Z2.965 E.23068 G1 X126.91 Y110 E.10588 G1 X126.91 Y103.5 Z3.878 E.23167 G1 X126.91 Y100.5 E.10588 G1 X126.91 Y94 Z5.024 E.23295 G1 X126.91 Y91 E.10588 G1 X126.91 Y84.5 Z6.394 E.23446 G1 X126.91 Y82.459 E.07204 ;PATH_TASK id=1878 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X126.91 Y82.459 F21000 G1 F10601.455 G1 X126.486 Y82.459 E.01497 G1 X126.486 Y84.5 E.07204 G1 X126.486 Y91 Z5.024 E.23446 G1 X126.486 Y94 E.10588 G1 X126.486 Y100.5 Z3.878 E.23295 G1 X126.486 Y103.5 E.10588 G1 X126.486 Y110 Z2.965 E.23167 G1 X126.486 Y113 E.10588 G1 X126.486 Y119.5 Z2.282 E.23068 G1 X126.486 Y122.5 E.10588 G1 X126.486 Y129 Z1.827 E.22998 G1 X126.486 Y132 E.10588 G1 X126.486 Y137.541 Z1.633 E.19569 ;PATH_TASK id=1878 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X126.486 Y137.541 F21000 G1 F10601.455 G1 X126.061 Y137.541 E.015 G1 X126.061 Y132 Z1.827 E.19569 G1 X126.061 Y129 E.10588 G1 X126.061 Y122.5 Z2.282 E.22998 G1 X126.061 Y119.5 E.10588 G1 X126.061 Y113 Z2.965 E.23068 G1 X126.061 Y110 E.10588 G1 X126.061 Y103.5 Z3.878 E.23167 G1 X126.061 Y100.5 E.10588 G1 X126.061 Y94 Z5.024 E.23295 G1 X126.061 Y91 E.10588 G1 X126.061 Y84.5 Z6.394 E.23446 G1 X126.061 Y82.459 E.07204 ;PATH_TASK id=1878 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X126.061 Y82.459 F21000 G1 F10601.455 G1 X125.637 Y82.459 E.01497 G1 X125.637 Y84.5 E.07204 G1 X125.637 Y91 Z5.024 E.23446 G1 X125.637 Y94 E.10588 G1 X125.637 Y100.5 Z3.878 E.23295 G1 X125.637 Y103.5 E.10588 G1 X125.637 Y110 Z2.965 E.23167 G1 X125.637 Y113 E.10588 G1 X125.637 Y119.5 Z2.282 E.23068 G1 X125.637 Y122.5 E.10588 G1 X125.637 Y129 Z1.827 E.22998 G1 X125.637 Y132 E.10588 G1 X125.637 Y137.541 Z1.633 E.19569 ;PATH_TASK id=1878 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X125.637 Y137.541 F21000 G1 F10601.455 G1 X125.212 Y137.541 E.015 G1 X125.212 Y132 Z1.827 E.19569 G1 X125.212 Y129 E.10588 G1 X125.212 Y122.5 Z2.282 E.22998 G1 X125.212 Y119.5 E.10588 G1 X125.212 Y113 Z2.965 E.23068 G1 X125.212 Y110 E.10588 G1 X125.212 Y103.5 Z3.878 E.23167 G1 X125.212 Y100.5 E.10588 G1 X125.212 Y94 Z5.024 E.23295 G1 X125.212 Y91 E.10588 G1 X125.212 Y84.5 Z6.394 E.23446 G1 X125.212 Y82.459 E.07204 ;PATH_TASK id=1878 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X125.212 Y82.459 F21000 G1 F10601.455 G1 X124.788 Y82.459 E.01497 ;PATH_TASK id=1878 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X124.788 Y82.459 F21000 G1 F10601.455 G1 X124.788 Y84.5 E.07204 G1 X124.788 Y91 Z5.024 E.23446 G1 X124.788 Y94 E.10588 G1 X124.788 Y100.5 Z3.878 E.23295 G1 X124.788 Y103.5 E.10588 G1 X124.788 Y110 Z2.965 E.23167 G1 X124.788 Y113 E.10588 G1 X124.788 Y119.5 Z2.282 E.23068 G1 X124.788 Y122.5 E.10588 G1 X124.788 Y129 Z1.827 E.22998 G1 X124.788 Y132 E.10588 G1 X124.788 Y137.541 Z1.633 E.19569 ;PATH_TASK id=1878 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X124.788 Y137.541 F21000 G1 F10601.455 G1 X124.363 Y137.541 E.015 G1 X124.363 Y132 Z1.827 E.19569 G1 X124.363 Y129 E.10588 G1 X124.363 Y122.5 Z2.282 E.22998 G1 X124.363 Y119.5 E.10588 G1 X124.363 Y113 Z2.965 E.23068 G1 X124.363 Y110 E.10588 G1 X124.363 Y103.5 Z3.878 E.23167 G1 X124.363 Y100.5 E.10588 G1 X124.363 Y94 Z5.024 E.23295 G1 X124.363 Y91 E.10588 G1 X124.363 Y84.5 Z6.394 E.23446 G1 X124.363 Y82.459 E.07204 ;PATH_TASK id=1878 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X124.363 Y82.459 F21000 G1 F10601.455 G1 X123.939 Y82.459 E.01497 G1 X123.939 Y84.5 E.07204 G1 X123.939 Y91 Z5.024 E.23446 G1 X123.939 Y94 E.10588 G1 X123.939 Y100.5 Z3.878 E.23295 G1 X123.939 Y103.5 E.10588 G1 X123.939 Y110 Z2.965 E.23167 G1 X123.939 Y113 E.10588 G1 X123.939 Y119.5 Z2.282 E.23068 G1 X123.939 Y122.5 E.10588 G1 X123.939 Y129 Z1.827 E.22998 G1 X123.939 Y132 E.10588 G1 X123.939 Y137.541 Z1.633 E.19569 ;PATH_TASK id=1878 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X123.939 Y137.541 F21000 G1 F10601.455 G1 X123.514 Y137.541 E.015 ;PATH_TASK id=1878 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X123.514 Y137.541 F21000 G1 F10601.455 G1 X123.514 Y132 Z1.827 E.19569 G1 X123.514 Y129 E.10588 G1 X123.514 Y122.5 Z2.282 E.22998 G1 X123.514 Y119.5 E.10588 G1 X123.514 Y113 Z2.965 E.23068 G1 X123.514 Y110 E.10588 G1 X123.514 Y103.5 Z3.878 E.23167 G1 X123.514 Y100.5 E.10588 G1 X123.514 Y94 Z5.024 E.23295 G1 X123.514 Y91 E.10588 G1 X123.514 Y84.5 Z6.394 E.23446 G1 X123.514 Y82.459 E.07204 ;PATH_TASK id=1878 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X123.514 Y82.459 F21000 G1 F10601.455 G1 X123.09 Y82.459 E.01497 G1 X123.09 Y84.5 E.07204 G1 X123.09 Y91 Z5.024 E.23446 G1 X123.09 Y94 E.10588 G1 X123.09 Y100.5 Z3.878 E.23295 G1 X123.09 Y103.5 E.10588 G1 X123.09 Y110 Z2.965 E.23167 G1 X123.09 Y113 E.10588 G1 X123.09 Y119.5 Z2.282 E.23068 G1 X123.09 Y122.5 E.10588 G1 X123.09 Y129 Z1.827 E.22998 G1 X123.09 Y132 E.10588 G1 X123.09 Y137.541 Z1.633 E.19569 ;PATH_TASK id=1878 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X123.09 Y137.541 F21000 G1 F10601.455 G1 X122.665 Y137.541 E.015 G1 X122.665 Y132 Z1.827 E.19569 G1 X122.665 Y129 E.10588 G1 X122.665 Y122.5 Z2.282 E.22998 G1 X122.665 Y119.5 E.10588 G1 X122.665 Y113 Z2.965 E.23068 G1 X122.665 Y110 E.10588 G1 X122.665 Y103.5 Z3.878 E.23167 G1 X122.665 Y100.5 E.10588 G1 X122.665 Y94 Z5.024 E.23295 G1 X122.665 Y91 E.10588 G1 X122.665 Y84.5 Z6.394 E.23446 G1 X122.665 Y82.459 E.07204 ;PATH_TASK id=1878 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X122.665 Y82.459 F21000 G1 F10601.455 G1 X122.241 Y82.459 E.01497 G1 X122.241 Y84.5 E.07204 G1 X122.241 Y91 Z5.024 E.23446 G1 X122.241 Y94 E.10588 G1 X122.241 Y100.5 Z3.878 E.23295 G1 X122.241 Y103.5 E.10588 G1 X122.241 Y110 Z2.965 E.23167 G1 X122.241 Y113 E.10588 M73 P98 R0 G1 X122.241 Y119.5 Z2.282 E.23068 G1 X122.241 Y122.5 E.10588 G1 X122.241 Y129 Z1.827 E.22998 G1 X122.241 Y132 E.10588 G1 X122.241 Y137.541 Z1.633 E.19569 ;PATH_TASK id=1878 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X122.241 Y137.541 F21000 G1 F10601.455 G1 X121.816 Y137.541 E.015 G1 X121.816 Y132 Z1.827 E.19569 G1 X121.816 Y129 E.10588 G1 X121.816 Y122.5 Z2.282 E.22998 G1 X121.816 Y119.5 E.10588 G1 X121.816 Y113 Z2.965 E.23068 G1 X121.816 Y110 E.10588 G1 X121.816 Y103.5 Z3.878 E.23167 G1 X121.816 Y100.5 E.10588 G1 X121.816 Y94 Z5.024 E.23295 G1 X121.816 Y91 E.10588 G1 X121.816 Y84.5 Z6.394 E.23446 G1 X121.816 Y82.459 E.07204 ;PATH_TASK id=1878 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X121.816 Y82.459 F21000 G1 F10601.455 G1 X121.392 Y82.459 E.01497 G1 X121.392 Y84.5 E.07204 G1 X121.392 Y91 Z5.024 E.23446 G1 X121.392 Y94 E.10588 G1 X121.392 Y100.5 Z3.878 E.23295 G1 X121.392 Y103.5 E.10588 G1 X121.392 Y110 Z2.965 E.23167 G1 X121.392 Y113 E.10588 G1 X121.392 Y119.5 Z2.282 E.23068 G1 X121.392 Y122.5 E.10588 G1 X121.392 Y129 Z1.827 E.22998 G1 X121.392 Y132 E.10588 G1 X121.392 Y137.541 Z1.633 E.19569 ;PATH_TASK id=1878 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X121.392 Y137.541 F21000 G1 F10601.455 G1 X120.967 Y137.541 E.015 G1 X120.967 Y132 Z1.827 E.19569 G1 X120.967 Y129 E.10588 G1 X120.967 Y122.5 Z2.282 E.22998 G1 X120.967 Y119.5 E.10588 G1 X120.967 Y113 Z2.965 E.23068 G1 X120.967 Y110 E.10588 G1 X120.967 Y103.5 Z3.878 E.23167 G1 X120.967 Y100.5 E.10588 G1 X120.967 Y94 Z5.024 E.23295 G1 X120.967 Y91 E.10588 G1 X120.967 Y84.5 Z6.394 E.23446 G1 X120.967 Y82.276 E.0785 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 ;LAYER_CHANGE ;Z:6.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;6.6 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;6.6 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1879 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 M486 S0 G1 Z7.2 F720 G1 X129.346 Y137.846 F21000 G1 Z1.823 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F10200 G1 X120.654 Y137.846 E.29421 G1 X120.654 Y132 Z2.027 E.198 G1 X120.654 Y129 E.10155 G1 X120.654 Y122.5 Z2.482 E.22056 G1 X120.654 Y119.5 E.10155 G1 X120.654 Y113 Z3.165 E.22123 G1 X120.654 Y110 E.10155 G1 X120.654 Y103.5 Z4.078 E.22218 G1 X120.654 Y100.5 E.10155 G1 X120.654 Y94 Z5.224 E.22341 G1 X120.654 Y91 E.10155 G1 X120.654 Y84.5 Z6.594 E.22485 G1 X120.654 Y82.154 E.07941 G1 X129.346 Y82.154 E.29421 G1 X129.346 Y84.5 E.07941 G1 X129.346 Y91 Z5.224 E.22485 G1 X129.346 Y94 E.10155 G1 X129.346 Y100.5 Z4.078 E.22341 G1 X129.346 Y103.5 E.10155 G1 X129.346 Y110 Z3.165 E.22218 G1 X129.346 Y113 E.10155 G1 X129.346 Y119.5 Z2.482 E.22123 G1 X129.346 Y122.5 E.10155 G1 X129.346 Y129 Z2.027 E.22056 G1 X129.346 Y132 E.10155 G1 X129.346 Y137.806 Z1.824 E.19665 ;PATH_TASK id=1880 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 M204 T3000 G1 Z2.424 F720 G1 X129.389 Y137.806 F21000 G1 X129.389 Y137.889 G1 X129.775 Y138.275 G1 Z1.808 F720 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X120.225 Y138.275 E.32326 G1 X120.225 Y132 Z2.027 E.21253 G1 X120.225 Y129 E.10155 G1 X120.225 Y122.5 Z2.482 E.22056 G1 X120.225 Y119.5 E.10155 G1 X120.225 Y113 Z3.165 E.22123 G1 X120.225 Y110 E.10155 G1 X120.225 Y103.5 Z4.078 E.22218 G1 X120.225 Y100.5 E.10155 G1 X120.225 Y94 Z5.224 E.22341 G1 X120.225 Y91 E.10155 G1 X120.225 Y84.5 Z6.594 E.22485 G1 X120.225 Y81.725 E.09393 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y84.5 E.09393 G1 X129.775 Y91 Z5.224 E.22485 G1 X129.775 Y94 E.10155 G1 X129.775 Y100.5 Z4.078 E.22341 G1 X129.775 Y103.5 E.10155 G1 X129.775 Y110 Z3.165 E.22218 G1 X129.775 Y113 E.10155 G1 X129.775 Y119.5 Z2.482 E.22123 G1 X129.775 Y122.5 E.10155 G1 X129.775 Y129 Z2.027 E.22056 G1 X129.775 Y132 E.10155 G1 X129.775 Y138.235 Z1.809 E.21118 ;PATH_TASK id=1881 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 M204 T7000 G1 Z2.434 F720 G1 X129.389 Y137.889 F21000 G1 X129.389 Y137.541 G1 X129.224 Y137.541 G1 Z1.834 F720 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.45093 G1 F11029.14 G1 X120.959 Y137.541 E.2804 G1 X120.959 Y137.133 Z1.848 E.01385 ;PATH_TASK id=1881 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X120.959 Y137.133 F21000 G1 F11029.14 G1 X129.041 Y137.133 E.27419 G1 X129.041 Y136.725 Z1.862 E.01385 G1 X120.959 Y136.725 E.27419 G1 X120.959 Y136.317 Z1.876 E.01385 G1 X129.041 Y136.317 E.27419 G1 X129.041 Y135.909 Z1.89 E.01385 G1 X120.959 Y135.909 E.27419 G1 X120.959 Y135.501 Z1.905 E.01385 ;PATH_TASK id=1881 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X120.959 Y135.501 F21000 G1 F11029.14 G1 X129.041 Y135.501 E.27419 G1 X129.041 Y135.093 Z1.919 E.01385 G1 X120.959 Y135.093 E.27419 G1 X120.959 Y134.685 Z1.933 E.01385 G1 X129.041 Y134.685 E.27419 G1 X129.041 Y134.277 Z1.947 E.01385 G1 X120.959 Y134.277 E.27419 G1 X120.959 Y133.869 Z1.962 E.01385 ;PATH_TASK id=1881 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X120.959 Y133.869 F21000 G1 F11029.14 G1 X129.041 Y133.869 E.27419 G1 X129.041 Y133.461 Z1.976 E.01385 G1 X120.959 Y133.461 E.27419 G1 X120.959 Y133.053 Z1.99 E.01385 G1 X129.041 Y133.053 E.27419 G1 X129.041 Y132.645 Z2.004 E.01385 G1 X120.959 Y132.645 E.27419 G1 X120.959 Y132.237 Z2.019 E.01385 ;PATH_TASK id=1881 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X120.959 Y132.237 F21000 G1 F11029.14 G1 X129.041 Y132.237 E.27419 G1 X129.041 Y132 Z2.027 E.00805 G1 X129.041 Y131.829 E.0058 G1 X120.959 Y131.829 E.27419 G1 X120.959 Y131.42 E.01388 G1 X129.041 Y131.42 E.27419 G1 X129.041 Y131.012 E.01384 G1 X120.959 Y131.012 E.27419 G1 X120.959 Y130.604 E.01384 ;PATH_TASK id=1881 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X120.959 Y130.604 F21000 G1 F11029.14 G1 X129.041 Y130.604 E.27419 G1 X129.041 Y130.196 E.01384 G1 X120.959 Y130.196 E.27419 G1 X120.959 Y129.788 E.01384 G1 X129.041 Y129.788 E.27419 G1 X129.041 Y129.38 E.01384 G1 X120.959 Y129.38 E.27419 G1 X120.959 Y129 E.01289 G1 X120.959 Y128.972 Z2.029 E.00095 ;PATH_TASK id=1881 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X120.959 Y128.972 F21000 G1 F11029.14 G1 X129.041 Y128.972 E.27419 G1 X129.041 Y128.564 Z2.057 E.01387 G1 X120.959 Y128.564 E.27419 G1 X120.959 Y128.156 Z2.086 E.01388 G1 X129.041 Y128.156 E.27419 G1 X129.041 Y127.748 Z2.115 E.01388 G1 X120.959 Y127.748 E.27419 G1 X120.959 Y127.34 Z2.143 E.01387 ;PATH_TASK id=1881 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X120.959 Y127.34 F21000 G1 F11029.14 G1 X129.041 Y127.34 E.27419 G1 X129.041 Y126.932 Z2.172 E.01388 G1 X120.959 Y126.932 E.27419 G1 X120.959 Y126.524 Z2.2 E.01387 G1 X129.041 Y126.524 E.27419 G1 X129.041 Y126.116 Z2.229 E.01388 G1 X120.959 Y126.116 E.27419 G1 X120.959 Y125.708 Z2.257 E.01387 ;PATH_TASK id=1881 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X120.959 Y125.708 F21000 G1 F11029.14 G1 X129.041 Y125.708 E.27419 G1 X129.041 Y125.3 Z2.286 E.01388 G1 X120.959 Y125.3 E.27419 G1 X120.959 Y124.892 Z2.314 E.01387 G1 X129.041 Y124.892 E.27419 G1 X129.041 Y124.484 Z2.343 E.01388 ;PATH_TASK id=1881 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X129.041 Y124.484 F21000 G1 F11029.14 G1 X120.959 Y124.484 E.27419 G1 X120.959 Y124.076 Z2.371 E.01387 G1 X129.041 Y124.076 E.27419 G1 X129.041 Y123.668 Z2.4 E.01388 G1 X120.959 Y123.668 E.27419 G1 X120.959 Y123.26 Z2.428 E.01387 G1 X129.041 Y123.26 E.27419 G1 X129.041 Y122.852 Z2.457 E.01388 ;PATH_TASK id=1881 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X129.041 Y122.852 F21000 G1 F11029.14 G1 X120.959 Y122.852 E.27419 G1 X120.959 Y122.5 Z2.482 E.01197 G1 X120.959 Y122.444 E.0019 G1 X129.041 Y122.444 E.27419 G1 X129.041 Y122.036 E.01384 G1 X120.959 Y122.036 E.27419 G1 X120.959 Y121.628 E.01384 G1 X129.041 Y121.628 E.27419 G1 X129.041 Y121.22 E.01384 ;PATH_TASK id=1881 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X129.041 Y121.22 F21000 G1 F11029.14 G1 X120.959 Y121.22 E.27419 G1 X120.959 Y120.812 E.01384 G1 X129.041 Y120.812 E.27419 G1 X129.041 Y120.404 E.01384 G1 X120.959 Y120.404 E.27419 G1 X120.959 Y119.996 E.01384 G1 X129.041 Y119.996 E.27419 G1 X129.041 Y119.588 E.01384 ;PATH_TASK id=1881 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X129.041 Y119.588 F21000 G1 F11029.14 G1 X120.959 Y119.588 E.27419 G1 X120.959 Y119.5 E.00299 G1 X120.959 Y119.18 Z2.515 E.01091 G1 X129.041 Y119.18 E.27419 G1 X129.041 Y118.772 Z2.558 E.01392 G1 X120.959 Y118.772 E.27419 G1 X120.959 Y118.364 Z2.601 E.01392 G1 X129.041 Y118.364 E.27419 G1 X129.041 Y117.956 Z2.644 E.01392 ;PATH_TASK id=1881 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X129.041 Y117.956 F21000 G1 F11029.14 G1 X120.959 Y117.956 E.27419 G1 X120.959 Y117.548 Z2.687 E.01392 G1 X129.041 Y117.548 E.27419 G1 X129.041 Y117.14 Z2.73 E.01392 G1 X120.959 Y117.14 E.27419 G1 X120.959 Y116.732 Z2.772 E.01392 G1 X129.041 Y116.732 E.27419 G1 X129.041 Y116.324 Z2.815 E.01392 G1 X120.959 Y116.324 E.27419 G1 X120.959 Y115.916 Z2.858 E.01392 G1 X129.041 Y115.916 E.27419 G1 X129.041 Y115.508 Z2.901 E.01392 G1 X120.959 Y115.508 E.27419 G1 X120.959 Y115.1 Z2.944 E.01392 G1 X129.041 Y115.1 E.27419 G1 X129.041 Y114.692 Z2.987 E.01392 G1 X120.959 Y114.692 E.27419 G1 X120.959 Y114.284 Z3.03 E.01392 G1 X129.041 Y114.284 E.27419 G1 X129.041 Y113.876 Z3.073 E.01392 G1 X120.959 Y113.876 E.27419 G1 X120.959 Y113.468 Z3.115 E.01392 G1 X129.041 Y113.468 E.27419 G1 X129.041 Y113.06 Z3.158 E.01392 G1 X120.959 Y113.06 E.27419 G1 X120.959 Y113 Z3.165 E.00205 G1 X120.959 Y112.652 E.01181 G1 X129.041 Y112.652 E.27419 G1 X129.041 Y112.244 E.01384 G1 X120.959 Y112.244 E.27419 G1 X120.959 Y111.836 E.01384 ;PATH_TASK id=1881 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X120.959 Y111.836 F21000 G1 F11029.14 G1 X129.041 Y111.836 E.27419 G1 X129.041 Y111.428 E.01384 G1 X120.959 Y111.428 E.27419 G1 X120.959 Y111.02 E.01384 G1 X129.041 Y111.02 E.27419 G1 X129.041 Y110.612 E.01384 G1 X120.959 Y110.612 E.27419 G1 X120.959 Y110.204 E.01384 G1 X129.041 Y110.204 E.27419 G1 X129.041 Y110 E.00692 G1 X129.041 Y109.796 Z3.193 E.00699 G1 X120.959 Y109.796 E.27419 G1 X120.959 Y109.388 Z3.251 E.01398 G1 X129.041 Y109.388 E.27419 G1 X129.041 Y108.98 Z3.308 E.01398 G1 X120.959 Y108.98 E.27419 G1 X120.959 Y108.572 Z3.365 E.01398 G1 X129.041 Y108.572 E.27419 G1 X129.041 Y108.164 Z3.423 E.01398 G1 X120.959 Y108.164 E.27419 G1 X120.959 Y107.756 Z3.48 E.01398 G1 X129.041 Y107.756 E.27419 G1 X129.041 Y107.348 Z3.537 E.01398 G1 X120.959 Y107.348 E.27419 G1 X120.959 Y106.94 Z3.595 E.01398 G1 X129.041 Y106.94 E.27419 G1 X129.041 Y106.532 Z3.652 E.01398 G1 X120.959 Y106.532 E.27419 G1 X120.959 Y106.124 Z3.709 E.01398 G1 X129.041 Y106.124 E.27419 G1 X129.041 Y105.716 Z3.767 E.01398 G1 X120.959 Y105.716 E.27419 G1 X120.959 Y105.308 Z3.824 E.01398 G1 X129.041 Y105.308 E.27419 G1 X129.041 Y104.9 Z3.881 E.01398 G1 X120.959 Y104.9 E.27419 G1 X120.959 Y104.492 Z3.939 E.01398 G1 X129.041 Y104.492 E.27419 G1 X129.041 Y104.123 Z3.991 E.01264 G1 X129.041 Y104.084 Z3.996 E.00133 G1 X120.959 Y104.084 E.27419 G1 X120.959 Y103.676 Z4.053 E.01398 G1 X129.041 Y103.676 E.27419 G1 X129.041 Y103.5 Z4.078 E.00603 G1 X129.041 Y103.268 E.00787 G1 X120.959 Y103.268 E.27419 G1 X120.959 Y102.86 E.01384 G1 X129.041 Y102.86 E.27419 G1 X129.041 Y102.452 E.01384 G1 X120.959 Y102.452 E.27419 G1 X120.959 Y102.044 E.01384 G1 X129.041 Y102.044 E.27419 G1 X129.041 Y101.636 E.01384 G1 X120.959 Y101.636 E.27419 G1 X120.959 Y101.228 E.01384 ;PATH_TASK id=1881 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X120.959 Y101.228 F21000 G1 F11029.14 G1 X129.041 Y101.228 E.27419 G1 X129.041 Y100.82 E.01384 G1 X120.959 Y100.82 E.27419 G1 X120.959 Y100.5 E.01086 G1 X120.959 Y100.412 Z4.094 E.00303 G1 X129.041 Y100.412 E.27419 G1 X129.041 Y100.004 Z4.166 E.01406 G1 X120.959 Y100.004 E.27419 G1 X120.959 Y99.596 Z4.238 E.01406 ;PATH_TASK id=1881 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X120.959 Y99.596 F21000 G1 F11029.14 G1 X129.041 Y99.596 E.27419 G1 X129.041 Y99.188 Z4.31 E.01406 G1 X120.959 Y99.188 E.27419 G1 X120.959 Y98.78 Z4.382 E.01406 G1 X129.041 Y98.78 E.27419 G1 X129.041 Y98.372 Z4.453 E.01405 G1 X120.959 Y98.372 E.27419 G1 X120.959 Y97.964 Z4.525 E.01406 ;PATH_TASK id=1881 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X120.959 Y97.964 F21000 G1 F11029.14 G1 X129.041 Y97.964 E.27419 G1 X129.041 Y97.556 Z4.597 E.01406 G1 X120.959 Y97.556 E.27419 G1 X120.959 Y97.148 Z4.669 E.01406 G1 X129.041 Y97.148 E.27419 G1 X129.041 Y96.74 Z4.741 E.01406 G1 X120.959 Y96.74 E.27419 G1 X120.959 Y96.332 Z4.813 E.01406 ;PATH_TASK id=1881 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X120.959 Y96.332 F21000 G1 F11029.14 G1 X129.041 Y96.332 E.27419 G1 X129.041 Y95.924 Z4.885 E.01406 G1 X120.959 Y95.924 E.27419 G1 X120.959 Y95.516 Z4.957 E.01406 G1 X129.041 Y95.516 E.27419 G1 X129.041 Y95.108 Z5.029 E.01406 G1 X120.959 Y95.108 E.27419 G1 X120.959 Y94.7 Z5.101 E.01406 ;PATH_TASK id=1881 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X120.959 Y94.7 F21000 G1 F11029.14 G1 X129.041 Y94.7 E.27419 G1 X129.041 Y94.292 Z5.173 E.01406 G1 X120.959 Y94.292 E.27419 G1 X120.959 Y94 Z5.224 E.01006 G1 X120.959 Y93.884 E.00394 G1 X129.041 Y93.884 E.27419 G1 X129.041 Y93.476 E.01384 G1 X120.959 Y93.476 E.27419 G1 X120.959 Y93.068 E.01384 G1 X129.041 Y93.068 E.27419 G1 X129.041 Y92.66 E.01384 G1 X120.959 Y92.66 E.27419 G1 X120.959 Y92.252 E.01384 G1 X129.041 Y92.252 E.27419 G1 X129.041 Y91.844 E.01384 G1 X120.959 Y91.844 E.27419 G1 X120.959 Y91.436 E.01384 G1 X129.041 Y91.436 E.27419 G1 X129.041 Y91.028 E.01384 G1 X120.959 Y91.028 E.27419 G1 X120.959 Y91 E.00095 G1 X120.959 Y90.619 Z5.305 E.01321 G1 X129.041 Y90.619 E.27419 G1 X129.041 Y90.211 Z5.39 E.01414 G1 X120.959 Y90.211 E.27419 G1 X120.959 Y89.803 Z5.476 E.01415 G1 X129.041 Y89.803 E.27419 G1 X129.041 Y89.395 Z5.562 E.01415 G1 X120.959 Y89.395 E.27419 G1 X120.959 Y88.987 Z5.648 E.01415 G1 X129.041 Y88.987 E.27419 G1 X129.041 Y88.579 Z5.734 E.01415 G1 X120.959 Y88.579 E.27419 G1 X120.959 Y88.171 Z5.82 E.01415 G1 X129.041 Y88.171 E.27419 G1 X129.041 Y87.763 Z5.906 E.01415 G1 X120.959 Y87.763 E.27419 G1 X120.959 Y87.355 Z5.992 E.01415 G1 X129.041 Y87.355 E.27419 G1 X129.041 Y86.947 Z6.078 E.01415 G1 X120.959 Y86.947 E.27419 G1 X120.959 Y86.539 Z6.164 E.01415 G1 X129.041 Y86.539 E.27419 G1 X129.041 Y86.131 Z6.25 E.01415 G1 X120.959 Y86.131 E.27419 G1 X120.959 Y85.723 Z6.336 E.01415 G1 X129.041 Y85.723 E.27419 G1 X129.041 Y85.315 Z6.422 E.01415 G1 X120.959 Y85.315 E.27419 G1 X120.959 Y84.907 Z6.508 E.01415 G1 X129.041 Y84.907 E.27419 G1 X129.041 Y84.5 Z6.594 E.01411 G1 X120.959 Y84.499 E.27419 G1 X120.959 Y84.091 E.01384 G1 X129.041 Y84.091 E.27419 G1 X129.041 Y83.683 E.01384 G1 X120.959 Y83.683 E.27419 G1 X120.959 Y83.275 E.01384 G1 X129.041 Y83.275 E.27419 G1 X129.041 Y82.867 E.01384 G1 X120.959 Y82.867 E.27419 G1 X120.959 Y82.459 E.01384 G1 X129.224 Y82.459 E.2804 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 M106 S245 ;LAYER_CHANGE ;Z:6.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;6.8 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;6.8 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-B.stl id:0 copy 0 ;PATH_TASK id=1882 conformal=1 surface=0 source_layer=9 shell_offset=0.000000 M486 S0 G1 Z7.4 F720 G1 X129.775 Y138.275 F21000 G1 Z2.008 F720 G1 E.7 F1500 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X120.225 Y138.275 E.32326 G1 X120.225 Y132 Z2.227 E.21253 G1 X120.225 Y129 E.10155 G1 X120.225 Y122.5 Z2.682 E.22056 G1 X120.225 Y119.5 E.10155 G1 X120.225 Y113 Z3.365 E.22123 G1 X120.225 Y110 E.10155 G1 X120.225 Y103.5 Z4.278 E.22218 G1 X120.225 Y100.5 E.10155 G1 X120.225 Y94 Z5.424 E.22341 G1 X120.225 Y91 E.10155 G1 X120.225 Y84.5 Z6.794 E.22485 G1 X120.225 Y81.725 E.09393 G1 X129.775 Y81.725 E.32326 G1 X129.775 Y84.5 E.09393 G1 X129.775 Y91 Z5.424 E.22485 G1 X129.775 Y94 E.10155 G1 X129.775 Y100.5 Z4.278 E.22341 G1 X129.775 Y103.5 E.10155 G1 X129.775 Y110 Z3.365 E.22218 G1 X129.775 Y113 E.10155 G1 X129.775 Y119.5 Z2.682 E.22123 G1 X129.775 Y122.5 E.10155 G1 X129.775 Y129 Z2.227 E.22056 G1 X129.775 Y132 E.10155 G1 X129.775 Y138.235 Z2.009 E.21118 ;PATH_TASK id=1883 conformal=1 surface=0 source_layer=9 shell_offset=0.000000 G1 E-.7 F2700 G1 Z7.394 F720 G1 X129.478 Y81.846 F21000 G1 Z6.794 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.432356 G1 F6000 G1 X129.478 Y84.5 E.08594 G1 X129.478 Y91 Z5.424 E.21511 G1 X129.478 Y94 E.09715 G1 X129.478 Y100.5 Z4.278 E.21373 G1 X129.478 Y103.5 E.09715 G1 X129.478 Y110 Z3.365 E.21255 G1 X129.478 Y113 E.09715 G1 X129.478 Y119.5 Z2.682 E.21164 G1 X129.478 Y122.5 E.09715 M73 P99 R0 G1 X129.478 Y129 Z2.227 E.211 G1 X129.478 Y132 E.09715 G1 X129.478 Y137.985 Z2.018 E.19392 ;PATH_TASK id=1883 conformal=1 surface=0 source_layer=9 shell_offset=0.000000 G1 X129.478 Y137.985 F21000 G1 F6000 G1 X129.089 Y137.985 E.0126 G1 X129.089 Y132 Z2.227 E.19392 G1 X129.089 Y129 E.09715 G1 X129.089 Y122.5 Z2.682 E.211 G1 X129.089 Y119.5 E.09715 G1 X129.089 Y113 Z3.365 E.21164 G1 X129.089 Y110 E.09715 G1 X129.089 Y103.5 Z4.278 E.21255 G1 X129.089 Y100.5 E.09715 G1 X129.089 Y94 Z5.424 E.21373 G1 X129.089 Y91 E.09715 G1 X129.089 Y84.5 Z6.794 E.21511 G1 X129.089 Y82.015 E.08047 ;PATH_TASK id=1883 conformal=1 surface=0 source_layer=9 shell_offset=0.000000 G1 X129.089 Y82.015 F21000 G1 F6000 G1 X128.7 Y82.015 E.0126 G1 X128.7 Y84.5 E.08047 G1 X128.7 Y91 Z5.424 E.21511 G1 X128.7 Y94 E.09715 G1 X128.7 Y100.5 Z4.278 E.21373 G1 X128.7 Y103.5 E.09715 G1 X128.7 Y110 Z3.365 E.21255 G1 X128.7 Y113 E.09715 G1 X128.7 Y119.5 Z2.682 E.21164 G1 X128.7 Y122.5 E.09715 G1 X128.7 Y129 Z2.227 E.211 G1 X128.7 Y132 E.09715 G1 X128.7 Y137.985 Z2.018 E.19392 G1 X128.31 Y137.985 E.01263 G1 X128.31 Y132 Z2.227 E.19392 G1 X128.31 Y129 E.09715 G1 X128.31 Y122.5 Z2.682 E.211 G1 X128.31 Y119.5 E.09715 G1 X128.31 Y113 Z3.365 E.21164 G1 X128.31 Y110 E.09715 G1 X128.31 Y103.5 Z4.278 E.21255 G1 X128.31 Y100.5 E.09715 G1 X128.31 Y94 Z5.424 E.21373 G1 X128.31 Y91 E.09715 G1 X128.31 Y84.5 Z6.794 E.21511 G1 X128.31 Y82.015 E.08047 G1 X127.921 Y82.015 E.0126 G1 X127.921 Y84.5 E.08047 G1 X127.921 Y91 Z5.424 E.21511 G1 X127.921 Y94 E.09715 G1 X127.921 Y100.5 Z4.278 E.21373 G1 X127.921 Y103.5 E.09715 G1 X127.921 Y110 Z3.365 E.21255 G1 X127.921 Y113 E.09715 G1 X127.921 Y119.5 Z2.682 E.21164 G1 X127.921 Y122.5 E.09715 G1 X127.921 Y129 Z2.227 E.211 G1 X127.921 Y132 E.09715 G1 X127.921 Y137.985 Z2.018 E.19392 G1 X127.531 Y137.985 E.01263 G1 X127.531 Y132 Z2.227 E.19392 G1 X127.531 Y129 E.09715 G1 X127.531 Y122.5 Z2.682 E.211 G1 X127.531 Y119.5 E.09715 G1 X127.531 Y113 Z3.365 E.21164 G1 X127.531 Y110 E.09715 G1 X127.531 Y103.5 Z4.278 E.21255 G1 X127.531 Y100.5 E.09715 G1 X127.531 Y94 Z5.424 E.21373 G1 X127.531 Y91 E.09715 G1 X127.531 Y84.5 Z6.794 E.21511 G1 X127.531 Y82.015 E.08047 G1 X127.142 Y82.015 E.0126 G1 X127.142 Y84.5 E.08047 G1 X127.142 Y91 Z5.424 E.21511 G1 X127.142 Y94 E.09715 G1 X127.142 Y100.5 Z4.278 E.21373 G1 X127.142 Y103.5 E.09715 G1 X127.142 Y110 Z3.365 E.21255 G1 X127.142 Y113 E.09715 G1 X127.142 Y119.5 Z2.682 E.21164 G1 X127.142 Y122.5 E.09715 G1 X127.142 Y129 Z2.227 E.211 G1 X127.142 Y132 E.09715 G1 X127.142 Y137.985 Z2.018 E.19392 ;PATH_TASK id=1883 conformal=1 surface=0 source_layer=9 shell_offset=0.000000 G1 X127.142 Y137.985 F21000 G1 F6000 G1 X126.752 Y137.985 E.01263 G1 X126.752 Y132 Z2.227 E.19392 G1 X126.752 Y129 E.09715 G1 X126.752 Y122.5 Z2.682 E.211 G1 X126.752 Y119.5 E.09715 G1 X126.752 Y113 Z3.365 E.21164 G1 X126.752 Y110 E.09715 G1 X126.752 Y103.5 Z4.278 E.21255 G1 X126.752 Y100.5 E.09715 G1 X126.752 Y94 Z5.424 E.21373 G1 X126.752 Y91 E.09715 G1 X126.752 Y84.5 Z6.794 E.21511 G1 X126.752 Y82.015 E.08047 G1 X126.363 Y82.015 E.0126 G1 X126.363 Y84.5 E.08047 G1 X126.363 Y91 Z5.424 E.21511 G1 X126.363 Y94 E.09715 G1 X126.363 Y100.5 Z4.278 E.21373 G1 X126.363 Y103.5 E.09715 G1 X126.363 Y110 Z3.365 E.21255 G1 X126.363 Y113 E.09715 G1 X126.363 Y119.5 Z2.682 E.21164 G1 X126.363 Y122.5 E.09715 G1 X126.363 Y129 Z2.227 E.211 G1 X126.363 Y132 E.09715 G1 X126.363 Y137.985 Z2.018 E.19392 G1 X125.974 Y137.985 E.0126 G1 X125.974 Y132 Z2.227 E.19392 G1 X125.974 Y129 E.09715 G1 X125.974 Y122.5 Z2.682 E.211 G1 X125.974 Y119.5 E.09715 G1 X125.974 Y113 Z3.365 E.21164 G1 X125.974 Y110 E.09715 G1 X125.974 Y103.5 Z4.278 E.21255 G1 X125.974 Y100.5 E.09715 G1 X125.974 Y94 Z5.424 E.21373 G1 X125.974 Y91 E.09715 G1 X125.974 Y84.5 Z6.794 E.21511 G1 X125.974 Y82.015 E.08047 G1 X125.584 Y82.015 E.01263 ;PATH_TASK id=1883 conformal=1 surface=0 source_layer=9 shell_offset=0.000000 G1 X125.584 Y82.015 F21000 G1 F6000 G1 X125.584 Y84.5 E.08047 G1 X125.584 Y91 Z5.424 E.21511 G1 X125.584 Y94 E.09715 G1 X125.584 Y100.5 Z4.278 E.21373 G1 X125.584 Y103.5 E.09715 G1 X125.584 Y110 Z3.365 E.21255 G1 X125.584 Y113 E.09715 G1 X125.584 Y119.5 Z2.682 E.21164 G1 X125.584 Y122.5 E.09715 G1 X125.584 Y129 Z2.227 E.211 G1 X125.584 Y132 E.09715 G1 X125.584 Y137.985 Z2.018 E.19392 G1 X125.195 Y137.985 E.0126 G1 X125.195 Y132 Z2.227 E.19392 G1 X125.195 Y129 E.09715 G1 X125.195 Y122.5 Z2.682 E.211 G1 X125.195 Y119.5 E.09715 G1 X125.195 Y113 Z3.365 E.21164 G1 X125.195 Y110 E.09715 G1 X125.195 Y103.5 Z4.278 E.21255 G1 X125.195 Y100.5 E.09715 G1 X125.195 Y94 Z5.424 E.21373 G1 X125.195 Y91 E.09715 G1 X125.195 Y84.5 Z6.794 E.21511 G1 X125.195 Y82.015 E.08047 G1 X124.805 Y82.015 E.01263 G1 X124.805 Y84.5 E.08047 G1 X124.805 Y91 Z5.424 E.21511 G1 X124.805 Y94 E.09715 G1 X124.805 Y100.5 Z4.278 E.21373 G1 X124.805 Y103.5 E.09715 G1 X124.805 Y110 Z3.365 E.21255 G1 X124.805 Y113 E.09715 G1 X124.805 Y119.5 Z2.682 E.21164 G1 X124.805 Y122.5 E.09715 G1 X124.805 Y129 Z2.227 E.211 G1 X124.805 Y132 E.09715 G1 X124.805 Y137.985 Z2.018 E.19392 G1 X124.416 Y137.985 E.0126 G1 X124.416 Y132 Z2.227 E.19392 G1 X124.416 Y129 E.09715 G1 X124.416 Y122.5 Z2.682 E.211 G1 X124.416 Y119.5 E.09715 G1 X124.416 Y113 Z3.365 E.21164 G1 X124.416 Y110 E.09715 G1 X124.416 Y103.5 Z4.278 E.21255 G1 X124.416 Y100.5 E.09715 G1 X124.416 Y94 Z5.424 E.21373 G1 X124.416 Y91 E.09715 G1 X124.416 Y84.5 Z6.794 E.21511 G1 X124.416 Y82.015 E.08047 G1 X124.026 Y82.015 E.01263 G1 X124.026 Y84.5 E.08047 G1 X124.026 Y91 Z5.424 E.21511 G1 X124.026 Y94 E.09715 G1 X124.026 Y100.5 Z4.278 E.21373 G1 X124.026 Y103.5 E.09715 G1 X124.026 Y110 Z3.365 E.21255 G1 X124.026 Y113 E.09715 G1 X124.026 Y119.5 Z2.682 E.21164 G1 X124.026 Y122.5 E.09715 G1 X124.026 Y129 Z2.227 E.211 G1 X124.026 Y132 E.09715 G1 X124.026 Y137.985 Z2.018 E.19392 G1 X123.637 Y137.985 E.0126 G1 X123.637 Y132 Z2.227 E.19392 G1 X123.637 Y129 E.09715 G1 X123.637 Y122.5 Z2.682 E.211 G1 X123.637 Y119.5 E.09715 G1 X123.637 Y113 Z3.365 E.21164 G1 X123.637 Y110 E.09715 G1 X123.637 Y103.5 Z4.278 E.21255 G1 X123.637 Y100.5 E.09715 G1 X123.637 Y94 Z5.424 E.21373 G1 X123.637 Y91 E.09715 G1 X123.637 Y84.5 Z6.794 E.21511 G1 X123.637 Y82.015 E.08047 G1 X123.248 Y82.015 E.0126 G1 X123.248 Y84.5 E.08047 G1 X123.248 Y91 Z5.424 E.21511 G1 X123.248 Y94 E.09715 G1 X123.248 Y100.5 Z4.278 E.21373 G1 X123.248 Y103.5 E.09715 G1 X123.248 Y110 Z3.365 E.21255 G1 X123.248 Y113 E.09715 G1 X123.248 Y119.5 Z2.682 E.21164 G1 X123.248 Y122.5 E.09715 G1 X123.247 Y129 Z2.227 E.211 G1 X123.247 Y132 E.09715 G1 X123.247 Y137.985 Z2.018 E.19392 ;PATH_TASK id=1883 conformal=1 surface=0 source_layer=9 shell_offset=0.000000 G1 X123.247 Y137.985 F21000 G1 F6000 G1 X122.858 Y137.985 E.0126 G1 X122.858 Y132 Z2.227 E.19392 G1 X122.858 Y129 E.09715 G1 X122.858 Y122.5 Z2.682 E.211 G1 X122.858 Y119.5 E.09715 G1 X122.858 Y113 Z3.365 E.21164 G1 X122.858 Y110 E.09715 G1 X122.858 Y103.5 Z4.278 E.21255 G1 X122.858 Y100.5 E.09715 G1 X122.858 Y94 Z5.424 E.21373 G1 X122.858 Y91 E.09715 G1 X122.858 Y84.5 Z6.794 E.21511 G1 X122.858 Y82.015 E.08047 G1 X122.469 Y82.015 E.0126 G1 X122.469 Y84.5 E.08047 G1 X122.469 Y91 Z5.424 E.21511 G1 X122.469 Y94 E.09715 G1 X122.469 Y100.5 Z4.278 E.21373 G1 X122.469 Y103.5 E.09715 G1 X122.469 Y110 Z3.365 E.21255 G1 X122.469 Y113 E.09715 G1 X122.469 Y119.5 Z2.682 E.21164 G1 X122.469 Y122.5 E.09715 G1 X122.469 Y129 Z2.227 E.211 G1 X122.469 Y132 E.09715 G1 X122.469 Y137.985 Z2.018 E.19392 G1 X122.079 Y137.985 E.01263 G1 X122.079 Y132 Z2.227 E.19392 G1 X122.079 Y129 E.09715 G1 X122.079 Y122.5 Z2.682 E.211 G1 X122.079 Y119.5 E.09715 G1 X122.079 Y113 Z3.365 E.21164 G1 X122.079 Y110 E.09715 G1 X122.079 Y103.5 Z4.278 E.21255 G1 X122.079 Y100.5 E.09715 G1 X122.079 Y94 Z5.424 E.21373 G1 X122.079 Y91 E.09715 G1 X122.079 Y84.5 Z6.794 E.21511 G1 X122.079 Y82.015 E.08047 G1 X121.69 Y82.015 E.0126 G1 X121.69 Y84.5 E.08047 G1 X121.69 Y91 Z5.424 E.21511 G1 X121.69 Y94 E.09715 G1 X121.69 Y100.5 Z4.278 E.21373 G1 X121.69 Y103.5 E.09715 G1 X121.69 Y110 Z3.365 E.21255 G1 X121.69 Y113 E.09715 G1 X121.69 Y119.5 Z2.682 E.21164 G1 X121.69 Y122.5 E.09715 G1 X121.69 Y129 Z2.227 E.211 G1 X121.69 Y132 E.09715 G1 X121.69 Y137.985 Z2.018 E.19392 G1 X121.3 Y137.985 E.01263 G1 X121.3 Y132 Z2.227 E.19392 G1 X121.3 Y129 E.09715 G1 X121.3 Y122.5 Z2.682 E.211 G1 X121.3 Y119.5 E.09715 G1 X121.3 Y113 Z3.365 E.21164 G1 X121.3 Y110 E.09715 G1 X121.3 Y103.5 Z4.278 E.21255 G1 X121.3 Y100.5 E.09715 G1 X121.3 Y94 Z5.424 E.21373 G1 X121.3 Y91 E.09715 G1 X121.3 Y84.5 Z6.794 E.21511 G1 X121.3 Y82.015 E.08047 ;PATH_TASK id=1883 conformal=1 surface=0 source_layer=9 shell_offset=0.000000 G1 X121.3 Y82.015 F21000 G1 F6000 G1 X120.911 Y82.015 E.0126 ;PATH_TASK id=1883 conformal=1 surface=0 source_layer=9 shell_offset=0.000000 G1 X120.911 Y82.015 F21000 G1 F6000 G1 X120.911 Y84.5 E.08047 G1 X120.911 Y91 Z5.424 E.21511 G1 X120.911 Y94 E.09715 G1 X120.911 Y100.5 Z4.278 E.21373 G1 X120.911 Y103.5 E.09715 G1 X120.911 Y110 Z3.365 E.21255 G1 X120.911 Y113 E.09715 G1 X120.911 Y119.5 Z2.682 E.21164 G1 X120.911 Y122.5 E.09715 G1 X120.911 Y129 Z2.227 E.211 G1 X120.911 Y132 E.09715 G1 X120.911 Y137.985 Z2.018 E.19392 ;PATH_TASK id=1883 conformal=1 surface=0 source_layer=9 shell_offset=0.000000 G1 X120.911 Y137.985 F21000 G1 F6000 G1 X120.521 Y137.985 E.01263 G1 X120.521 Y132 Z2.227 E.19392 G1 X120.521 Y129 E.09715 G1 X120.521 Y122.5 Z2.682 E.211 G1 X120.521 Y119.5 E.09715 G1 X120.521 Y113 Z3.365 E.21164 G1 X120.521 Y110 E.09715 G1 X120.521 Y103.5 Z4.278 E.21255 G1 X120.521 Y100.5 E.09715 G1 X120.521 Y94 Z5.424 E.21373 G1 X120.521 Y91 E.09715 G1 X120.521 Y84.5 Z6.794 E.21511 G1 X120.521 Y81.846 E.08594 ; stop printing object angle-test-v1.3-B.stl id:0 copy 0 G1 E-.7 F2700 M486 S-1 M106 S0 ;TYPE:Custom ; Filament-specific end gcode G1 Z7.8 F720 ; move print head up G1 E-1 F2400 ; additional retraction M104 S0 ; turn off temperature M140 S0 ; turn off heatbed M141 S0 ; disable chamber control M107 ; turn off fan G1 X242 Y-9 F10200 ; park G4 ; wait M572 S0 ; reset PA M84 X Y E ; disable motors ; max_layer_z = 6.8 M73 P100 R0 ; EXECUTABLE_BLOCK_END ; filament used [mm] = 677.55 ; filament used [cm3] = 1.63 ; filament used [g] = 2.02 ; filament cost = 0.05 ; total filament used [g] = 2.02 ; total filament cost = 0.05 ; total layers count = 34 ; estimated printing time (normal mode) = 38m 41s ; estimated first layer printing time (normal mode) = 30m 32s ; CONFIG_BLOCK_START ; accel_to_decel_enable = 1 ; accel_to_decel_factor = 50% ; activate_air_filtration = 0 ; activate_air_filtration_during_print = 1 ; activate_air_filtration_on_completion = 1 ; activate_chamber_temp_control = 0 ; adaptive_bed_mesh_margin = 0 ; adaptive_pressure_advance = 0 ; adaptive_pressure_advance_bridges = 0 ; adaptive_pressure_advance_model = "0,0,0\n0,0,0" ; adaptive_pressure_advance_overhangs = 0 ; additional_cooling_fan_speed = 70 ; additional_fan_full_speed_layer = 0 ; align_infill_direction_to_model = 0 ; alternate_extra_wall = 0 ; auxiliary_fan = 0 ; bbl_calib_mark_logo = 1 ; bed_custom_model = ; bed_custom_texture = ; bed_exclude_area = 0x0 ; bed_mesh_max = 99999,99999 ; bed_mesh_min = -99999,-99999 ; bed_mesh_probe_distance = 50,50 ; bed_temperature_formula = by_highest_temp ; before_layer_change_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n{if layer_z > 150}\nM201 X{interpolate_table(layer_z, (0,7000), (150,7000), (200,4000), (270,2000))} Y{interpolate_table(layer_z, (0,7000), (150,7000), (200,4000), (270,2000))}\n{endif}\n ; best_object_pos = 0.5,0.5 ; bottom_shell_layers = 3 ; bottom_shell_thickness = 0.5 ; bottom_solid_infill_flow_ratio = 1 ; bottom_surface_density = 100% ; bottom_surface_filament_id = 0 ; bottom_surface_pattern = monotonic ; bridge_acceleration = 1500 ; bridge_angle = 0 ; bridge_density = 100% ; bridge_flow = 1 ; bridge_line_width = 100% ; bridge_no_support = 0 ; bridge_speed = 50 ; brim_ears_detection_length = 1 ; brim_ears_max_angle = 125 ; brim_flow_ratio = 1 ; brim_object_gap = 0.1 ; brim_type = no_brim ; brim_use_efc_outline = 0 ; brim_width = 5 ; calib_flowrate_topinfill_special_order = 0 ; chamber_minimal_temperature = 0 ; chamber_temperature = 20 ; change_extrusion_role_gcode = ; change_filament_gcode = M600\nG1 E0.3 F1500 ; prime after color change ; close_additional_fan_first_x_layers = 1 ; close_fan_the_first_x_layers = 1 ; combine_brims = 0 ; complete_print_exhaust_fan_speed = 80 ; cool_plate_temp = 35 ; cool_plate_temp_initial_layer = 35 ; cooling_tube_length = 5 ; cooling_tube_retraction = 91.5 ; counterbore_hole_bridging = none ; curr_bed_type = Cool Plate ; default_acceleration = 3000 ; default_filament_colour = "" ; default_filament_profile = "Prusament PLA @CORE One" ; default_jerk = 0 ; default_junction_deviation = 0 ; default_print_profile = 0.20mm SPEED @CORE One 0.4 ; deretraction_speed = 25 ; detect_narrow_internal_solid_infill = 1 ; detect_overhang_wall = 1 ; detect_thin_wall = 0 ; different_settings_to_system = ;; ; disable_m73 = 0 ; dont_filter_internal_bridges = disabled ; dont_slow_down_outer_wall = 0 ; draft_shield = disabled ; during_print_exhaust_fan_speed = 60 ; elefant_foot_compensation = 0.2 ; elefant_foot_compensation_layers = 1 ; elefant_foot_layers_density = 100% ; emit_machine_limits_to_gcode = 1 ; enable_arc_fitting = 1 ; enable_extra_bridge_layer = disabled ; enable_filament_ramming = 1 ; enable_long_retraction_when_cut = 0 ; enable_overhang_bridge_fan = 1 ; enable_overhang_speed = 1 ; enable_power_loss_recovery = printer_configuration ; enable_pressure_advance = 0 ; enable_prime_tower = 0 ; enable_support = 0 ; enable_tower_interface_cooldown_during_tower = 0 ; enable_tower_interface_features = 0 ; enable_wrapping_detection = 0 ; enforce_support_layers = 0 ; eng_plate_temp = 0 ; eng_plate_temp_initial_layer = 0 ; ensure_vertical_shell_thickness = ensure_all ; exclude_object = 1 ; extra_loading_move = -2 ; extra_perimeters_on_overhangs = 0 ; extra_solid_infills = ; extruder_ams_count = ; extruder_clearance_height_to_lid = 50 ; extruder_clearance_height_to_rod = 33 ; extruder_clearance_radius = 75 ; extruder_colour = #F2754E ; extruder_offset = 0x0 ; extruder_printable_area = ; extruder_printable_height = 0 ; extruder_type = Direct Drive ; extrusion_rate_smoothing_external_perimeter_only = 0 ; fan_cooling_layer_time = 40 ; fan_kickstart = 0 ; fan_max_speed = 100 ; fan_min_speed = 85 ; fan_speedup_overhangs = 1 ; fan_speedup_time = 0 ; filament_adaptive_volumetric_speed = 0 ; filament_adhesiveness_category = 0 ; filament_change_extrusion_role_gcode = "" ; filament_change_length = 10 ; filament_colour = #F2754E ; filament_cooling_before_tower = 10 ; filament_cooling_final_speed = 3.4 ; filament_cooling_initial_speed = 2.2 ; filament_cooling_moves = 4 ; filament_cost = 25.4 ; filament_density = 1.24 ; filament_diameter = 1.75 ; filament_end_gcode = "; Filament-specific end gcode" ; filament_extruder_variant = "Direct Drive Standard" ; filament_flow_ratio = 1 ; filament_flush_temp = 0 ; filament_flush_volumetric_speed = 0 ; filament_ids = "Prusa Generic PLA @CORE One" ; filament_is_support = 0 ; filament_loading_speed = 28 ; filament_loading_speed_start = 3 ; filament_map = 1 ; filament_map_mode = Auto For Flush ; filament_max_volumetric_speed = 15 ; filament_minimal_purge_on_wipe_tower = 15 ; filament_multitool_ramming = 0 ; filament_multitool_ramming_flow = 10 ; filament_multitool_ramming_volume = 10 ; filament_notes = "" ; filament_printable = 3 ; filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ; filament_self_index = 1 ; filament_settings_id = "NP filament CORE-One" ; filament_shrink = 100% ; filament_shrinkage_compensation_z = 100% ; filament_soluble = 0 ; filament_stamping_distance = 0 ; filament_stamping_loading_speed = 0 ; filament_start_gcode = "M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.07{elsif nozzle_diameter[filament_extruder_id]==0.35}0.06{elsif nozzle_diameter[filament_extruder_id]==0.6}0.03{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One|CORE One L).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp" ; filament_toolchange_delay = 0 ; filament_tower_interface_pre_extrusion_dist = 10 ; filament_tower_interface_pre_extrusion_length = 0 ; filament_tower_interface_print_temp = -1 ; filament_tower_interface_purge_volume = 20 ; filament_tower_ironing_area = 4 ; filament_type = PLA ; filament_unloading_speed = 90 ; filament_unloading_speed_start = 100 ; filament_vendor = Generic ; filament_z_hop = 0.6 ; filament_z_hop_types = Slope Lift ; file_start_gcode = ; filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode ; fill_multiline = 1 ; filter_out_gap_fill = 0 ; first_layer_flow_ratio = 1 ; first_layer_print_sequence = 0 ; first_x_layer_fan_speed = 0 ; flush_into_infill = 0 ; flush_into_objects = 0 ; flush_into_support = 1 ; flush_multiplier = 0.3 ; flush_volumes_matrix = 0,280,280,280,280,0,280,280,280,280,0,280,280,280,280,0 ; flush_volumes_vector = 140,140,140,140,140,140,140,140 ; full_fan_speed_layer = 3 ; fuzzy_skin = disabled_fuzzy ; fuzzy_skin_first_layer = 0 ; fuzzy_skin_layers_between_ripple_offset = 1 ; fuzzy_skin_mode = displacement ; fuzzy_skin_noise_type = classic ; fuzzy_skin_octaves = 4 ; fuzzy_skin_persistence = 0.5 ; fuzzy_skin_point_distance = 0.3 ; fuzzy_skin_ripple_offset = 50% ; fuzzy_skin_ripples_per_layer = 15 ; fuzzy_skin_scale = 1 ; fuzzy_skin_thickness = 0.2 ; gap_fill_flow_ratio = 1 ; gap_fill_target = nowhere ; gap_infill_speed = 120 ; gcode_add_line_number = 0 ; gcode_comments = 0 ; gcode_flavor = marlin2 ; gcode_label_objects = 1 ; grab_length = 0 ; gyroid_optimized = 0 ; has_scarf_joint_seam = 0 ; head_wrap_detect_zone = ; high_current_on_filament_swap = 0 ; hole_to_polyhole = 0 ; hole_to_polyhole_threshold = 0.01 ; hole_to_polyhole_twisted = 1 ; host_type = prusalink ; hot_plate_temp = 60 ; hot_plate_temp_initial_layer = 60 ; idle_temperature = 150 ; independent_support_layer_height = 1 ; infill_anchor = 2 ; infill_anchor_max = 12 ; infill_combination = 0 ; infill_combination_max_layer_height = 100% ; infill_direction = 45 ; infill_jerk = 9 ; infill_lock_depth = 1 ; infill_overhang_angle = 60 ; infill_shift_step = 0.4 ; infill_wall_overlap = 15% ; inherits_group = "0.20mm SPEED @CORE One 0.4";"Prusa Generic PLA @CORE One";"Prusa CORE One 0.4 nozzle" ; initial_layer_acceleration = 500 ; initial_layer_infill_speed = 100 ; initial_layer_jerk = 9 ; initial_layer_line_width = 0.5 ; initial_layer_min_bead_width = 85% ; initial_layer_print_height = 0.2 ; initial_layer_speed = 45 ; initial_layer_travel_acceleration = 100% ; initial_layer_travel_jerk = 100% ; initial_layer_travel_speed = 100% ; inner_wall_acceleration = 6000 ; inner_wall_filament_id = 0 ; inner_wall_flow_ratio = 1 ; inner_wall_jerk = 9 ; inner_wall_line_width = 0.45 ; inner_wall_speed = 170 ; input_shaping_damp_x = 0.1 ; input_shaping_damp_y = 0.1 ; input_shaping_emit = 0 ; input_shaping_freq_x = 0 ; input_shaping_freq_y = 0 ; input_shaping_type = Default ; interface_shells = 0 ; interlocking_beam = 0 ; interlocking_beam_layer_count = 2 ; interlocking_beam_width = 0.8 ; interlocking_boundary_avoidance = 2 ; interlocking_depth = 2 ; interlocking_orientation = 22.5 ; internal_bridge_angle = 0 ; internal_bridge_density = 100% ; internal_bridge_fan_speed = -1 ; internal_bridge_flow = 1 ; internal_bridge_speed = 150% ; internal_solid_filament_id = 0 ; internal_solid_infill_acceleration = 6000 ; internal_solid_infill_flow_ratio = 1 ; internal_solid_infill_line_width = 0.45 ; internal_solid_infill_pattern = monotonic ; internal_solid_infill_speed = 200 ; ironing_angle = 0 ; ironing_angle_fixed = 0 ; ironing_fan_speed = -1 ; ironing_flow = 10% ; ironing_inset = 0 ; ironing_pattern = rectilinear ; ironing_spacing = 0.15 ; ironing_speed = 30 ; ironing_type = no ironing ; is_infill_first = 0 ; lateral_lattice_angle_1 = -45 ; lateral_lattice_angle_2 = 45 ; layer_change_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] ; layer_height = 0.2 ; lightning_overhang_angle = 45 ; lightning_prune_angle = 45 ; lightning_straightening_angle = 45 ; line_width = 0.45 ; long_retractions_when_cut = 0 ; long_retractions_when_ec = 0 ; machine_end_gcode = {if layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; move print head up{endif}\nG1 E-1 F2400 ; additional retraction\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM141 S0 ; disable chamber control\nM107 ; turn off fan\nG1 X242 Y-9 F10200 ; park\nG4 ; wait\nM572 S0 ; reset PA\nM84 X Y E ; disable motors\n; max_layer_z = [max_layer_z] ; machine_load_filament_time = 0 ; machine_max_acceleration_e = 5000,2500 ; machine_max_acceleration_extruding = 7000,2500 ; machine_max_acceleration_retracting = 2500,1200 ; machine_max_acceleration_travel = 7000,2500 ; machine_max_acceleration_x = 10000,2500 ; machine_max_acceleration_y = 10000,2500 ; machine_max_acceleration_z = 400,200 ; machine_max_jerk_e = 10,10 ; machine_max_jerk_x = 10,8 ; machine_max_jerk_y = 10,8 ; machine_max_jerk_z = 2,2 ; machine_max_junction_deviation = 0.01 ; machine_max_speed_e = 100,100 ; machine_max_speed_x = 350,160 ; machine_max_speed_y = 350,160 ; machine_max_speed_z = 12,12 ; machine_min_extruding_rate = 0,0 ; machine_min_travel_rate = 0,0 ; machine_pause_gcode = M601 ; machine_start_gcode = ; --- Printer Initialization and Checks ---\n\nM17 ; enable steppers\nM862.1 P[nozzle_diameter] A{(printer_notes=~/.*ABRASIVE_NOZZLE.*/ ? 1 : 0)} F{(printer_notes=~/.*HF_NOZZLE.*/ ? 1 : 0)} ; nozzle check\nM862.3 P \"COREONE\" ; printer model check\nM862.5 P2 ; g-code level check\nM862.6 P\"Input shaper\" ; FW feature check\nM115 U6.3.0+10073\n\n; --- Print Area and Coordinate System ---\n\nM555 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} W{((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) - ((min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))} H{((first_layer_print_max[1])) - ((max(0, first_layer_print_min[1]) - 4))} ; define print area\n\nG90 ; use absolute coordinates\nM83 ; extruder in relative mode\n\n; --- Preparation ---\n\n{if chamber_temperature[initial_tool] > 35} \n; we need to preheat the chamber\nM140 S115 ; set bed temp for chamber heating\n{else} \n; just set the selected bed temp otherwise\nM140 S[first_layer_bed_temperature] ; set bed temp\n{endif}\n\nM109 R{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : 170)} ; wait for temp\n\nM84 E ; turn off E motor\n\nG28 ; home all axes without mesh bed leveling\n\n\n; -- Chamber Temperature Control --\n{if chamber_temperature[initial_tool] > 35} ; if we need to heat the chamber\n; min chamber temp section\nM104 T{initial_tool} S{if idle_temperature[initial_tool] == 0}100{else}{idle_temperature[initial_tool]}{endif} ; set idle temp\nG1 Z10 F720 ; set bed position\nG1 X242 Y-9 F4800 ; set print head position\nM191 S{chamber_temperature[initial_tool]} ; wait for minimal chamber temp\nM141 S0 ; set nominal chamber temp\nM107\nM140 S[first_layer_bed_temperature] ; set bed temp\n\n{else}\nM141 S{if chamber_temperature[initial_tool] == 0}20{else}{chamber_temperature[initial_tool]}{endif} ; set nominal chamber temp\n{endif}\n\n{if first_layer_bed_temperature[initial_tool]<=60}M106 S70{endif}\nG0 Z40 F10000\nM104 T{initial_tool} S{if idle_temperature[initial_tool] == 0}100{else}{idle_temperature[initial_tool]}{endif}\nM190 R[first_layer_bed_temperature] ; wait for bed temp\nM107\n\nG29 G ; absorb heat\n\nM109 R{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : 170)} ; wait for MBL temp\n\nM302 S160 ; lower cold extrusion limit to 160C\n\n{if filament_type[initial_tool]==\"FLEX\"}\nG1 E-4 F2400 ; retraction\n{else}\nG1 E-2 F2400 ; retraction\n{endif}\n\nM84 E ; turn off E motor\n\n; --- Mesh Bed Leveling (MBL) ---\n\nG29 P9 X208 Y-2.5 W32 H4 ; limited MBL\nM84 E ; turn off E motor\n\nG29 P1 ; invalidate MBL and probe print area\nG29 P1 X150 Y0 W100 H20 C ; probe near purge area\nG29 P3.2 ; MBL interpolation\nG29 P3.13 ; MBL extrapolation outside probe area\nG29 A ; activate MBL\n\n; --- Preparation for Purge Line ---\n\nM104 S{first_layer_temperature[initial_extruder]}\nG0 X249 Y-2.5 Z15 F4800 ; move away and ready for the purge\nM109 S{first_layer_temperature[initial_extruder]}\n\nG92 E0 ; reset extruder position\nM569 S0 E ; set spreadcycle mode for extruder\n\n; --- Extrude Purge Line ---\n\nG92 E0 ; reset extruder position\nG1 E{(filament_type[0] == \"FLEX\" ? 4 : 2)} F2400 ; deretraction after the initial one\nG0 E5 X235 Z0.2 F500 ; purge\nG0 X225 E4 F500 ; purge\nG0 X215 E4 F650 ; purge\nG0 X205 E4 F800 ; purge\nG0 X202 Z0.05 F8000 ; wipe, close to bed\nG0 X199 Z0.2 F8000 ; wipe, quickly away from bed\n\nG92 E0 ; reset extruder position\nM221 S100 ; set flow to 100% ; machine_tool_change_time = 0 ; machine_unload_filament_time = 0 ; make_overhang_printable = 0 ; make_overhang_printable_angle = 55 ; make_overhang_printable_hole_size = 0 ; manual_filament_change = 0 ; master_extruder_id = 1 ; max_bridge_length = 10 ; max_layer_height = 0.3 ; max_resonance_avoidance_speed = 120 ; max_travel_detour_distance = 0 ; max_volumetric_extrusion_rate_slope = 0 ; max_volumetric_extrusion_rate_slope_segment_length = 3 ; min_bead_width = 85% ; min_feature_size = 25% ; min_layer_height = 0.07 ; min_length_factor = 0.5 ; min_resonance_avoidance_speed = 70 ; min_skirt_length = 4 ; min_width_top_surface = 300% ; minimum_sparse_infill_area = 0 ; mmu_segmented_region_interlocking_depth = 0 ; mmu_segmented_region_max_width = 0 ; nonplanar_layers_angle = 12 ; nonplanar_layers_height = 5 ; nonplanar_top_surface_direction = 90 ; nonplanar_top_surface_flow_ratio = 1 ; notes = ; nozzle_diameter = 0.4 ; nozzle_flush_dataset = 0 ; nozzle_height = 2.5 ; nozzle_hrc = 0 ; nozzle_temperature = 220 ; nozzle_temperature_initial_layer = 230 ; nozzle_temperature_range_high = 230 ; nozzle_temperature_range_low = 190 ; nozzle_type = undefine ; nozzle_volume = 0 ; nozzle_volume_type = Standard ; only_one_wall_first_layer = 0 ; only_one_wall_top = 0 ; ooze_prevention = 0 ; other_layers_print_sequence = 0 ; other_layers_print_sequence_nums = 0 ; outer_wall_acceleration = 3000 ; outer_wall_filament_id = 0 ; outer_wall_flow_ratio = 1 ; outer_wall_jerk = 9 ; outer_wall_line_width = 0.45 ; outer_wall_speed = 170 ; overhang_1_4_speed = 80% ; overhang_2_4_speed = 30 ; overhang_3_4_speed = 50 ; overhang_4_4_speed = 15 ; overhang_fan_speed = 100 ; overhang_fan_threshold = 50% ; overhang_flow_ratio = 1 ; overhang_reverse = 0 ; overhang_reverse_internal_only = 0 ; overhang_reverse_threshold = 50% ; parallel_printheads_bed_exclude_areas = ; parallel_printheads_count = 1 ; parking_pos_retraction = 92 ; part_cooling_fan_min_pwm = 0 ; physical_extruder_map = 0 ; post_process = ; precise_outer_wall = 1 ; precise_z_height = 0 ; preferred_orientation = 0 ; preheat_steps = 1 ; preheat_time = 30 ; pressure_advance = 0.02 ; prime_tower_brim_width = 3 ; prime_tower_enable_framework = 0 ; prime_tower_flat_ironing = 0 ; prime_tower_infill_gap = 150% ; prime_tower_skip_points = 1 ; prime_tower_width = 60 ; prime_volume = 45 ; print_compatible_printers = "Prusa CORE One 0.4 nozzle" ; print_extruder_id = 1 ; print_extruder_variant = "Direct Drive Standard" ; print_flow_ratio = 1 ; print_order = default ; print_sequence = by layer ; print_settings_id = NP process CORE-One ; printable_area = 0x0,250x0,250x220,0x220 ; printable_height = 270 ; printer_extruder_id = 1 ; printer_extruder_variant = "Direct Drive Standard" ; printer_model = Prusa CORE One ; printer_notes = Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_COREONE\nPG\nNO_TEMPLATES ; printer_settings_id = NP machine CORE-One ; printer_structure = corexy ; printer_technology = FFF ; printer_variant = 0.4 ; printing_by_object_gcode = ; process_change_extrusion_role_gcode = ; purge_in_prime_tower = 1 ; raft_contact_distance = 0.15 ; raft_expansion = 1.5 ; raft_first_layer_density = 80% ; raft_first_layer_expansion = 3.5 ; raft_layers = 0 ; reduce_crossing_wall = 1 ; reduce_fan_stop_start_freq = 1 ; reduce_infill_retraction = 0 ; relative_bridge_angle = 0 ; required_nozzle_HRC = 0 ; resolution = 0.001 ; resonance_avoidance = 0 ; retract_before_wipe = 80% ; retract_length_toolchange = 0 ; retract_lift_above = 0 ; retract_lift_below = 269 ; retract_lift_enforce = All Surfaces ; retract_restart_extra = 0 ; retract_restart_extra_toolchange = 0 ; retract_when_changing_layer = 1 ; retraction_distances_when_cut = 18 ; retraction_distances_when_ec = 10 ; retraction_length = 0.7 ; retraction_minimum_travel = 1.5 ; retraction_speed = 45 ; role_based_wipe_speed = 1 ; scan_first_layer = 0 ; scarf_angle_threshold = 155 ; scarf_joint_flow_ratio = 1 ; scarf_joint_speed = 100% ; scarf_overhang_threshold = 40% ; seam_gap = 10% ; seam_position = aligned ; seam_slope_conditional = 0 ; seam_slope_entire_loop = 0 ; seam_slope_inner_walls = 0 ; seam_slope_min_length = 20 ; seam_slope_start_height = 0 ; seam_slope_steps = 10 ; seam_slope_type = none ; set_nonplanar_top_surface_direction = 1 ; set_nonplanar_top_surface_flow_ratio = 0 ; set_other_flow_ratios = 0 ; silent_mode = 0 ; single_extruder_multi_material = 0 ; single_extruder_multi_material_priming = 0 ; single_loop_draft_shield = 0 ; skeleton_infill_density = 25% ; skeleton_infill_line_width = 100% ; skin_infill_density = 25% ; skin_infill_depth = 2 ; skin_infill_line_width = 100% ; skirt_distance = 2 ; skirt_height = 3 ; skirt_loops = 0 ; skirt_speed = 50 ; skirt_start_angle = -135 ; skirt_type = combined ; slice_closing_radius = 0.049 ; slicing_mode = regular ; slow_down_for_layer_cooling = 1 ; slow_down_layer_time = 8 ; slow_down_layers = 0 ; slow_down_min_speed = 20 ; slowdown_for_curled_perimeters = 1 ; small_area_infill_flow_compensation = 0 ; small_area_infill_flow_compensation_model = 0,0;"\n0.2,0.4444";"\n0.4,0.6145";"\n0.6,0.7059";"\n0.8,0.7619";"\n1.5,0.8571";"\n2,0.8889";"\n3,0.9231";"\n5,0.9520";"\n10,1" ; small_perimeter_speed = 170 ; small_perimeter_threshold = 0 ; solid_infill_direction = 45 ; solid_infill_rotate_template = ; sparse_infill_acceleration = 7000 ; sparse_infill_density = 15% ; sparse_infill_filament_id = 0 ; sparse_infill_flow_ratio = 1 ; sparse_infill_line_width = 0.45 ; sparse_infill_pattern = crosshatch ; sparse_infill_rotate_template = ; sparse_infill_speed = 200 ; spiral_finishing_flow_ratio = 0 ; spiral_mode = 0 ; spiral_mode_max_xy_smoothing = 200% ; spiral_mode_smooth = 0 ; spiral_starting_flow_ratio = 0 ; staggered_inner_seams = 0 ; standby_temperature_delta = -5 ; start_end_points = 30x-3,54x245 ; supertack_plate_temp = 35 ; supertack_plate_temp_initial_layer = 35 ; support_air_filtration = 1 ; support_angle = 0 ; support_base_pattern = rectilinear ; support_base_pattern_spacing = 2 ; support_bottom_interface_spacing = 0.5 ; support_bottom_z_distance = 0.2 ; support_chamber_temp_control = 1 ; support_critical_regions_only = 0 ; support_expansion = 0 ; support_filament = 0 ; support_flow_ratio = 1 ; support_interface_bottom_layers = 0 ; support_interface_filament = 0 ; support_interface_flow_ratio = 1 ; support_interface_loop_pattern = 0 ; support_interface_not_for_body = 1 ; support_interface_pattern = auto ; support_interface_spacing = 0.2 ; support_interface_speed = 60 ; support_interface_top_layers = 3 ; support_ironing = 0 ; support_ironing_flow = 10% ; support_ironing_pattern = rectilinear ; support_ironing_spacing = 0.1 ; support_line_width = 0.36 ; support_material_interface_fan_speed = -1 ; support_multi_bed_types = 0 ; support_object_first_layer_gap = 0.2 ; support_object_skip_flush = 0 ; support_object_xy_distance = 0.36 ; support_on_build_plate_only = 0 ; support_parallel_printheads = 0 ; support_remove_small_overhang = 1 ; support_speed = 120 ; support_style = snug ; support_threshold_angle = 35 ; support_threshold_overlap = 50% ; support_top_z_distance = 0.2 ; support_type = normal(auto) ; symmetric_infill_y_axis = 0 ; temperature_vitrification = 60 ; template_custom_gcode = ; textured_cool_plate_temp = 40 ; textured_cool_plate_temp_initial_layer = 40 ; textured_plate_temp = 45 ; textured_plate_temp_initial_layer = 45 ; thick_bridges = 0 ; thick_internal_bridges = 1 ; thumbnails = 16x16/QOI, 313x173/QOI, 440x240/QOI, 480x240/QOI, 640x480/PNG ; time_cost = 0 ; time_lapse_gcode = ; timelapse_enabled = 0 ; timelapse_type = 0 ; tool_change_on_wipe_tower = 0 ; top_bottom_infill_wall_overlap = 25% ; top_shell_layers = 3 ; top_shell_thickness = 0.7 ; top_solid_infill_flow_ratio = 1 ; top_surface_acceleration = 2000 ; top_surface_density = 100% ; top_surface_filament_id = 0 ; top_surface_jerk = 9 ; top_surface_line_width = 0.42 ; top_surface_pattern = monotonicline ; top_surface_speed = 100 ; travel_acceleration = 7000 ; travel_jerk = 12 ; travel_slope = 1 ; travel_speed = 350 ; travel_speed_z = 12 ; tree_support_angle_slow = 25 ; tree_support_auto_brim = 1 ; tree_support_branch_angle = 40 ; tree_support_branch_angle_organic = 40 ; tree_support_branch_diameter = 2 ; tree_support_branch_diameter_angle = 5 ; tree_support_branch_diameter_organic = 2 ; tree_support_branch_distance = 5 ; tree_support_branch_distance_organic = 1 ; tree_support_brim_width = 3 ; tree_support_tip_diameter = 0.8 ; tree_support_top_rate = 30% ; tree_support_wall_count = 0 ; use_3mf = 0 ; use_firmware_retraction = 0 ; use_nonplanar_layers = 1 ; use_relative_e_distances = 1 ; volumetric_speed_coefficients = "" ; wall_direction = ccw ; wall_distribution_count = 1 ; wall_generator = arachne ; wall_loops = 2 ; wall_maximum_deviation = 0.025 ; wall_maximum_resolution = 0.5 ; wall_sequence = inner wall/outer wall ; wall_transition_angle = 10 ; wall_transition_filter_deviation = 25% ; wall_transition_length = 100% ; wipe = 0 ; wipe_before_external_loop = 0 ; wipe_distance = 1 ; wipe_on_loops = 0 ; wipe_speed = 80% ; wipe_tower_bridging = 10 ; wipe_tower_cone_angle = 30 ; wipe_tower_extra_flow = 100% ; wipe_tower_extra_rib_length = 0 ; wipe_tower_extra_spacing = 100% ; wipe_tower_filament = 0 ; wipe_tower_fillet_wall = 1 ; wipe_tower_max_purge_speed = 90 ; wipe_tower_no_sparse_layers = 0 ; wipe_tower_rib_width = 8 ; wipe_tower_rotation_angle = 0 ; wipe_tower_type = type2 ; wipe_tower_wall_type = rib ; wipe_tower_x = 15.000 ; wipe_tower_x = 15 ; wipe_tower_y = 220.000 ; wipe_tower_y = 220 ; wiping_volumes_extruders = 70,70,70,70,70,70,70,70,70,70 ; wrapping_detection_gcode = ; wrapping_detection_layers = 20 ; wrapping_exclude_area = ; xy_contour_compensation = 0 ; xy_hole_compensation = 0 ; z_hop = 0.2 ; z_hop_types = Slope Lift ; z_offset = 0 ; zaa_dont_alternate_fill_direction = 0 ; zaa_enabled = 0 ; zaa_min_z = 0.05 ; zaa_minimize_perimeter_height = 35 ; first_layer_bed_temperature = 35 ; bed_shape = 0x0,250x0,250x220,0x220 ; first_layer_temperature = 230 ; first_layer_height = 0.200 ; CONFIG_BLOCK_END