Heated Filament DryBox

Partlist:
---------------------------------------

Ikea 365+ Voratsbox/storage box				- https://www.ikea.com/de/de/p/ikea-365-vorratsbehaelter-mit-deckel-rechteckig-kunststoff-s79276760/
PTC-Keramik-Lufterhitzer/keramic heater, 50W 12V 	- https://www.amazon.de/gp/product/B09FYW1W6V/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Lüfter / Fan (40x40)		(2 x)			- https://www.amazon.de/dp/B07ZBSNXHZ?ref=ppx_yo2ov_dt_b_product_details&th=1
MosFet Schalter/Switch		(3 x)			- https://www.amazon.de/dp/B0BXPHH5ZF/?coliid=I2G6BN9ONR8D81&colid=2FFO9H2GTOVRP&psc=1&ref_=list_c_wl_lv_ov_lig_dp_it
Edelstahlstifte/Stainless steel pins 1mm(2 x)		- https://www.amazon.de/dp/B09JSS6TWP?psc=1&ref=ppx_yo2ov_dt_b_product_details	
DC Buchse/Plug			(1 x)			- https://www.amazon.de/dp/B09PD6J4BN?psc=1&ref=ppx_yo2ov_dt_b_product_details

DHT11				(1 x)			- https://www.amazon.de/dp/B078S7FCZ9?ref=ppx_yo2ov_dt_b_product_details&th=1
Resistor 6,8k		
Resistor 100 Ohm 		(2 x)	
Arduino Nano						
LCD Display 16x2 with I2C				- https://www.amazon.de/Hintergrundbeleuchtung-I2C-Treiber-Schnittstelle-LCD-Modul-Display-Kompatibel/dp/B09FXMLYKZ/ref=sr_1_20?crid=R28INQK84VJ0&keywords=arduino%2Blcd%2Bdisplay%2B16x2%2Bi2c&qid=1699610291&sprefix=LCD%2BArdui%2Caps%2C96&sr=8-20&th=1
Rotaryencoder mit Taster/Button				- https://www.amazon.de/gp/product/B07SV5HHM5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Netzteil/Power adapter 12V / 5A				- https://www.amazon.de/gp/product/B07L5GP7SD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 
LM7805   5V Voltage regulator
Electrolytic capacitor    10µF
---------------------------------------------------------------------------------



weitere Teile / further parts / info:

Maße für Arduino-Platine/ dimensions Arduino pcb: 30 x 70mm
Note: 	place the usb port on left side, 2 holes space at pcb bottom, 3 holes at pcb top.
	Use socket headers for the Arduino to get the necessary hight. So you will have
      	access to the usb port from outside. Screw terminal and 5V regulator can be placed
	right beside the Arduino on the pcb.


Maße für DHT11 Platine / dimensions DHT11 pcb: 12 x 27mm
ALU Rohr/Tube: d= 10mm, L=145mm
ALU Rohr/Tube: d= 10mm, L=175mm (Alternative für drehbare Aufhängung zum Drucken aus der Box, alterntive tube for printing from the box)

Lochdurchmesser Absaugung / Hole diameter suction: 38mm
Lochdurchmesser Frischluft / Hole diameter fresh air: 20mm

Schrauben/Screws 4Stck.: M3x8

Schrauben/Screws Ventilator groß/big Fan Frischluft/fresh air	 4Stck.: M3x10
Schrauben/Screws kleines Einalss Ventil/small Alss valve 	4Stck.: M3x12

Schrauben/Screws ECase:
2 Stck.  M3x10
2 Stck.  M3x6

Kabellänge/Cable length DHT11: 60-65cm
Kabellänge/Cable length Absaugventilator/Exhaust fan: ca 50cm

Pin headers and socket headers for connectiong cables and for Arduino Nano


 * Recommended drying temperatures:
     PLA, PLA+                : 40-45 degree
     ABS, ABS+,  PETG         : 45-50 degree
     PVA,PVB, ASA, TPU, PMMA  : 50-55 degree