The Tudor Town House is designed to print without supports straight from the build plate.
It prints well on both FDM and Resin printers.

RESIN PRINTING…
Printing flat against the plate on resin printers can commonly cause a print fault that I call a tide mark.
It’s best to angle the print to the plate to prevent this.
For that reason, I have also included some “resin supported” files already tilted 2.5 degrees on
both x and y axis.

RESIN PRINTING ARTIFACTS…
There are projecting details on these prints, such as the brickwork and woodgrain, which may
result in tiny artifacts forming within the liquid resin whilst printing.
For this reason it is recommended that after each Layer is printed, the resin should be filtered.

FOLLOW ME... AND TELL ME WHAT OTHER FREE PRINTS YOU'D LIKE TO SEE…
Following me lets me know you enjoy my 3D models, so I really appreciate it.
And feel free to tell me what sort of thing you'd like to see me make. I'm happy to hear suggestions.

You can write to me here:
https://www.vegoilguy.co.uk/contact_general.php


V O G M A N   : )




https://www.youtube.com/@vogman
https://cults3d.com/en/users/VogMan/3d-models
https://ww w.instagram.com/the_vogman 
https://www.facebook.com/thevogman 
https://rumble.com/c/VOGMAN 
https://www.patreon.com/vegoilguy 
https://www.etsy.com/shop/VegOilGuy 
http://www.vogman.co.uk