===========================================
 Skull Bowl – 3D Print Instructions
===========================================

Model: Skull Bowl.stl
Suggested Slicer: Creality Print / Cura
Author: Damien 3MF

Recommended Print Settings:
---------------------------
• Layer Height: 0.20 mm (first layer 0.20 mm)
• Walls: 6 perimeters
• Top/Bottom: Top 5 layers (0.8 mm), Bottom 3 layers (0.6 mm)
• Infill: 15% Grid (Monotonic internal infill)
• Material: PLA+ recommended, PETG/ABS possible
• Print Speed: 60 mm/s first layer, 200 mm/s outer wall, 300 mm/s inner wall, 200–250 mm/s infill, 150 mm/s supports

Supports:
---------
• Required (tree supports recommended)
• On build plate only, 30° angle threshold
• Critical areas: jaw, cheekbones, and cranial overhangs

Adhesion:
---------
• Use a Brim (5 mm width, 0.1 mm gap) to help secure the model to the bed.

Post-Printing:
--------------
• Remove tree supports carefully from eye sockets, jawline, and nasal cavity.
• Light sanding to clean support scars on cheekbones and under the jaw.
• Optional: Prime and paint for bone realism or leave raw for anatomical accuracy.

Notes:
------
This skull is a high-resolution mesh (1M+ triangles) and may slice slowly.
The model is watertight and manifold.
Ideal for display, anatomy reference, or Halloween props.