; generated by PrusaSlicer 2.3.0+ on 2021-11-04 at 07:16:41 UTC

; 

; external perimeters extrusion width = 0.60mm
; perimeters extrusion width = 0.50mm
; infill extrusion width = 0.50mm
; solid infill extrusion width = 0.50mm
; top infill extrusion width = 0.45mm
; first layer extrusion width = 0.42mm

M73 P0 R21
M73 Q0 S21
M201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2
M203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec
M204 P1250 R1250 T1250 ; sets acceleration (P, T) and retract acceleration (R), mm/sec^2
M205 X8.00 Y8.00 Z0.40 E4.50 ; sets the jerk limits, mm/sec
M205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec
M107
;TYPE:Custom
M862.3 P "MK3S" ; printer model check
M862.1 P0.4 ; nozzle diameter check
M115 U3.10.0 ; tell printer latest fw version
G90 ; use absolute coordinates
M83 ; extruder relative mode
M104 S215 ; set extruder temp
M140 S60 ; set bed temp
M190 S60 ; wait for bed temp
M109 S215 ; wait for extruder temp
G28 W ; home all without mesh bed level
G80 ; mesh bed leveling
G1 Y-3.0 F1000.0 ; go outside print area
G92 E0.0
G1 X60.0 E9.0 F1000.0 ; intro line
M73 P0 R20
G1 X100.0 E12.5 F1000.0 ; intro line
G92 E0.0
M221 S95

; Don't change E values below. Excessive value can damage the printer.

M907 E538 ; set extruder motor current
G21 ; set units to millimeters
G90 ; use absolute coordinates
M83 ; use relative distances for extrusion
M900 K0.05 ; Filament gcode LA 1.5
M900 K30 ; Filament gcode LA 1.0
;LAYER_CHANGE
;Z:0.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;0.2


G1 E-0.80000 F2100.000
G1 Z0.400 F10800.000
;AFTER_LAYER_CHANGE
;0.2
G1 X99.878 Y85.206
G1 Z0.200
G1 E0.80000 F2100.000
M204 S1000
;TYPE:Skirt
;WIDTH:0.42
G1 F1200.000
G1 X100.484 Y85.123 E0.01917
G1 X149.504 Y85.123 E1.53697
G1 X150.324 Y85.270 E0.02614
G1 X151.046 Y85.695 E0.02626
G1 X154.231 Y88.871 E0.14104
G1 X154.686 Y89.566 E0.02602
G1 X167.405 Y119.747 E1.02693
G1 X167.527 Y120.450 E0.02237
G1 X167.471 Y123.014 E0.08040
G1 X167.316 Y123.479 E0.01538
G1 X167.069 Y123.903 E0.01538
G1 X166.740 Y124.267 E0.01538
G1 X166.340 Y124.558 E0.01550
G1 X165.772 Y124.794 E0.01929
G1 X165.159 Y124.877 E0.01941
G1 X84.823 Y124.877 E2.51886
M73 P1 R20
M73 Q1 S20
G1 X84.218 Y124.791 E0.01917
G1 X83.651 Y124.552 E0.01929
G1 X83.167 Y124.179 E0.01917
G1 X82.792 Y123.690 E0.01929
G1 X82.568 Y123.166 E0.01787
G1 X82.475 Y122.604 E0.01787
G1 X82.476 Y120.382 E0.06967
G1 X82.619 Y119.679 E0.02249
G1 X95.317 Y89.559 E1.02490
G1 X95.795 Y88.844 E0.02696
G1 X98.846 Y85.792 E0.13531
G1 X99.310 Y85.442 E0.01823
G1 X99.823 Y85.229 E0.01741
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;WIPE_START
G1 F8640.000
G1 X100.484 Y85.123 E-0.15464
G1 X103.106 Y85.123 E-0.60536
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z0.600 F10800.000
G1 X105.164 Y88.690
G1 Z0.200
G1 E0.80000 F2100.000
;TYPE:External perimeter
G1 F1200.000
G1 X144.836 Y88.690 E1.24386
G1 X151.310 Y95.164 E0.28709
G1 X151.310 Y114.836 E0.61677
G1 X144.836 Y121.310 E0.28709
G1 X105.203 Y121.310 E1.24264
G1 X98.690 Y115.802 E0.26746
M73 P2 R20
M73 Q2 S20
G1 X98.690 Y95.164 E0.64706
G1 X105.122 Y88.732 E0.28521
G1 X105.196 Y88.291 F10800.000
G1 X104.634 Y88.687
;TYPE:Perimeter
G1 F1200.000
G1 X98.687 Y94.634 E0.26370
G1 X98.687 Y90.992 E0.11421
G1 X100.992 Y88.687 E0.10219
G1 X104.574 Y88.687 E0.11232
;WIPE_START
G1 F8640.000
G1 X102.259 Y91.026 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z0.600 F10800.000
G1 X98.687 Y116.293
G1 Z0.200
G1 E0.80000 F2100.000
G1 F1200.000
G1 X104.623 Y121.313 E0.24374
G1 X96.866 Y121.313 E0.24321
G1 X98.687 Y119.492 E0.08075
G1 X98.687 Y116.353 E0.09841
;WIPE_START
G1 F8640.000
G1 X101.213 Y118.463 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z0.600 F10800.000
G1 X145.366 Y121.313
G1 Z0.200
G1 E0.80000 F2100.000
G1 F1200.000
G1 X151.313 Y115.366 E0.26370
G1 X151.313 Y119.492 E0.12936
G1 X153.134 Y121.313 E0.08075
G1 X145.426 Y121.313 E0.24169
;WIPE_START
G1 F8640.000
G1 X147.741 Y118.974 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z0.600 F10800.000
G1 X151.313 Y94.634
G1 Z0.200
G1 E0.80000 F2100.000
G1 F1200.000
G1 X145.366 Y88.687 E0.26370
G1 X149.008 Y88.687 E0.11421
G1 X151.313 Y90.992 E0.10219
G1 X151.313 Y94.574 E0.11232
;WIPE_START
G1 F8640.000
G1 X148.974 Y92.259 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z0.600 F10800.000
G1 X151.690 Y119.336
G1 Z0.200
G1 E0.80000 F2100.000
;TYPE:External perimeter
G1 F1200.000
G1 X153.664 Y121.310 E0.08755
G1 X164.124 Y121.310 E0.32796
G1 X164.124 Y121.690 E0.01191
G1 X85.876 Y121.690 E2.45343
M73 P3 R20
M73 Q3 S20
G1 X85.876 Y121.310 E0.01191
G1 X96.336 Y121.310 E0.32796
G1 X98.310 Y119.336 E0.08755
G1 X98.310 Y90.836 E0.89360
G1 X100.836 Y88.310 E0.11199
G1 X149.164 Y88.310 E1.51532
G1 X151.690 Y90.836 E0.11199
G1 X151.690 Y119.276 E0.89172
G1 X151.499 Y119.687 F10800.000
;WIPE_START
G1 F8640.000
G1 X153.664 Y121.310 E-0.65463
G1 X154.121 Y121.310 E-0.10537
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z0.600 F10800.000
G1 X151.200 Y116.378
G1 Z0.200
G1 E0.80000 F2100.000
;TYPE:Solid infill
;WIDTH:0.421741
G1 F1200.000
G1 X150.950 Y116.129 E0.01112
G1 X150.682 Y116.396 E0.01193
G1 X151.030 Y116.744 E0.01550
G1 X151.030 Y117.280 E0.01688
G1 X150.414 Y116.664 E0.02743
G1 X150.147 Y116.932 E0.01193
G1 X151.030 Y117.816 E0.03936
G1 X151.030 Y118.351 E0.01688
G1 X149.879 Y117.200 E0.05129
G1 X149.611 Y117.468 E0.01193
G1 X151.030 Y118.887 E0.06323
G1 X151.030 Y119.423 E0.01688
G1 X149.343 Y117.736 E0.07516
G1 X149.075 Y118.004 E0.01193
G1 X152.102 Y121.030 E0.13482
G1 X151.566 Y121.030 E0.01688
G1 X148.807 Y118.272 E0.12288
G1 X148.539 Y118.539 E0.01193
G1 X151.030 Y121.030 E0.11095
G1 X150.494 Y121.030 E0.01688
G1 X148.271 Y118.807 E0.09902
G1 X148.004 Y119.075 E0.01193
G1 X149.959 Y121.030 E0.08709
G1 X149.423 Y121.030 E0.01688
G1 X147.736 Y119.343 E0.07515
G1 X147.468 Y119.611 E0.01193
G1 X148.887 Y121.030 E0.06322
G1 X148.351 Y121.030 E0.01688
G1 X147.200 Y119.879 E0.05129
G1 X146.932 Y120.147 E0.01193
G1 X147.816 Y121.030 E0.03936
G1 X147.280 Y121.030 E0.01688
G1 X146.664 Y120.414 E0.02742
G1 X146.396 Y120.682 E0.01193
G1 X146.744 Y121.030 E0.01549
G1 X146.208 Y121.030 E0.01688
G1 X146.009 Y120.830 E0.00890
;WIPE_START
G1 F8640.000
G1 X146.208 Y121.030 E-0.06528
G1 X146.744 Y121.030 E-0.12370
G1 X146.396 Y120.682 E-0.11356
G1 X146.664 Y120.414 E-0.08747
G1 X147.280 Y121.030 E-0.20103
G1 X147.816 Y121.030 E-0.12370
G1 X147.677 Y120.892 E-0.04525
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z0.600 F10800.000
G1 X151.200 Y91.293
G1 Z0.200
G1 E0.80000 F2100.000
;WIDTH:0.440769
G1 F1200.000
G1 X148.876 Y88.970 E0.10870
G1 X148.314 Y88.970 E0.01861
G1 X151.030 Y91.686 E0.12708
G1 X151.030 Y92.249 E0.01861
G1 X147.751 Y88.970 E0.15340
G1 X147.188 Y88.970 E0.01861
G1 X151.030 Y92.812 E0.17973
G1 X151.030 Y93.374 E0.01861
G1 X146.626 Y88.970 E0.20605
G1 X146.063 Y88.970 E0.01861
G1 X151.200 Y94.106 E0.24031
;WIPE_START
M73 P4 R20
M73 Q4 S20
G1 F8640.000
G1 X148.872 Y91.779 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z0.600 F10800.000
G1 X103.622 Y88.800
G1 Z0.200
G1 E0.80000 F2100.000
;WIDTH:0.421743
G1 F1200.000
G1 X103.871 Y89.050 E0.01112
G1 X103.604 Y89.318 E0.01193
G1 X103.256 Y88.970 E0.01550
G1 X102.720 Y88.970 E0.01688
G1 X103.336 Y89.586 E0.02743
G1 X103.068 Y89.853 E0.01193
G1 X102.184 Y88.970 E0.03936
G1 X101.648 Y88.970 E0.01688
G1 X102.800 Y90.121 E0.05129
G1 X102.532 Y90.389 E0.01193
G1 X101.113 Y88.970 E0.06323
G1 X100.843 Y89.236 E0.01193
G1 X102.264 Y90.657 E0.06331
G1 X101.996 Y90.925 E0.01193
G1 X100.575 Y89.504 E0.06331
G1 X100.307 Y89.772 E0.01193
G1 X101.728 Y91.193 E0.06331
G1 X101.461 Y91.461 E0.01193
G1 X100.039 Y90.039 E0.06331
G1 X99.771 Y90.307 E0.01193
G1 X101.193 Y91.729 E0.06331
G1 X100.925 Y91.996 E0.01193
G1 X99.504 Y90.575 E0.06331
G1 X99.236 Y90.843 E0.01193
G1 X100.657 Y92.264 E0.06331
G1 X100.389 Y92.532 E0.01193
G1 X98.970 Y91.113 E0.06322
G1 X98.970 Y91.649 E0.01688
G1 X100.121 Y92.800 E0.05129
G1 X99.853 Y93.068 E0.01193
G1 X98.970 Y92.184 E0.03936
G1 X98.970 Y92.720 E0.01688
G1 X99.586 Y93.336 E0.02743
G1 X99.318 Y93.604 E0.01193
G1 X98.970 Y93.256 E0.01549
G1 X98.970 Y93.792 E0.01688
G1 X99.170 Y93.991 E0.00890
;WIPE_START
G1 F8640.000
G1 X98.970 Y93.792 E-0.06528
G1 X98.970 Y93.256 E-0.12370
G1 X99.318 Y93.604 E-0.11357
G1 X99.586 Y93.336 E-0.08747
G1 X98.970 Y92.720 E-0.20104
G1 X98.970 Y92.184 E-0.12370
G1 X99.108 Y92.323 E-0.04524
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z0.600 F10800.000
G1 X99.087 Y116.780
G1 Z0.200
G1 E0.80000 F2100.000
;WIDTH:0.438464
G1 F1200.000
G1 X103.338 Y121.030 E0.19770
G1 X102.778 Y121.030 E0.01840
G1 X98.970 Y117.222 E0.17715
G1 X98.970 Y117.781 E0.01840
G1 X102.219 Y121.030 E0.15113
G1 X101.660 Y121.030 E0.01840
G1 X98.970 Y118.340 E0.12511
G1 X98.970 Y118.900 E0.01840
G1 X101.100 Y121.030 E0.09909
G1 X100.541 Y121.030 E0.01840
G1 X98.970 Y119.459 E0.07307
G1 X98.970 Y119.609 E0.00492
G1 X98.765 Y119.814 E0.00953
G1 X99.981 Y121.030 E0.05658
G1 X99.422 Y121.030 E0.01840
G1 X98.485 Y120.093 E0.04357
G1 X98.206 Y120.373 E0.01301
G1 X98.863 Y121.030 E0.03056
G1 X98.303 Y121.030 E0.01840
G1 X97.926 Y120.653 E0.01755
G1 X97.646 Y120.932 E0.01301
G1 X97.914 Y121.200 E0.01243
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
M106 S84.15
;LAYER_CHANGE
;Z:0.5
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;0.5


;WIPE_START
G1 F8640.000
G1 X97.646 Y120.932 E-0.08730
G1 X97.926 Y120.653 E-0.09133
G1 X98.303 Y121.030 E-0.12322
G1 X98.863 Y121.030 E-0.12916
G1 X98.206 Y120.373 E-0.21455
G1 X98.485 Y120.093 E-0.09133
G1 X98.556 Y120.164 E-0.02310
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z0.600 F10800.000
;AFTER_LAYER_CHANGE
;0.5
G1 X150.324 Y85.270
G1 Z0.500
G1 E0.80000 F2100.000
;TYPE:Skirt
;WIDTH:0.42
G1 F2700.000
G1 X151.046 Y85.695 E0.03714
G1 X154.231 Y88.871 E0.19952
G1 X154.686 Y89.566 E0.03681
G1 X167.405 Y119.747 E1.45273
G1 X167.527 Y120.450 E0.03164
G1 X167.471 Y123.014 E0.11373
G1 X167.316 Y123.479 E0.02176
G1 X167.069 Y123.903 E0.02176
G1 X166.740 Y124.267 E0.02176
G1 X166.340 Y124.558 E0.02192
G1 X165.772 Y124.794 E0.02729
G1 X165.159 Y124.877 E0.02746
G1 X84.823 Y124.877 E3.56326
G1 X84.218 Y124.791 E0.02713
G1 X83.651 Y124.552 E0.02729
G1 X83.167 Y124.179 E0.02713
G1 X82.792 Y123.690 E0.02729
G1 X82.568 Y123.166 E0.02528
G1 X82.475 Y122.604 E0.02528
G1 X82.476 Y120.382 E0.09855
G1 X82.619 Y119.679 E0.03181
G1 X95.317 Y89.559 E1.44985
G1 X95.795 Y88.844 E0.03814
G1 X98.846 Y85.792 E0.19141
G1 X99.310 Y85.442 E0.02578
G1 X99.878 Y85.206 E0.02729
G1 X100.484 Y85.123 E0.02713
G1 X149.504 Y85.123 E2.17425
G1 X150.265 Y85.260 E0.03432
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;WIPE_START
G1 F8640.000
G1 X151.046 Y85.695 E-0.20641
G1 X152.744 Y87.388 E-0.55359
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z0.900 F10800.000
G1 X144.888 Y88.564
G1 Z0.500
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X151.436 Y95.112 E0.50314
G1 X151.436 Y114.888 E1.07444
M73 P5 R19
M73 Q5 S20
G1 X144.888 Y121.436 E0.50314
G1 X105.157 Y121.436 E2.15865
G1 X98.564 Y115.860 E0.46914
G1 X98.564 Y95.112 E1.12727
G1 X105.112 Y88.564 E0.50314
G1 X144.828 Y88.564 E2.15783
M204 S1000
G1 X144.686 Y89.050 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X150.950 Y95.314 E0.59177
G1 X150.950 Y114.686 E1.29421
G1 X144.686 Y120.950 E0.59177
G1 X105.335 Y120.950 E2.62887
G1 X99.050 Y115.635 E0.54991
G1 X99.050 Y95.314 E1.35755
G1 X105.314 Y89.050 E0.59177
G1 X144.626 Y89.050 E2.62631
M204 S1000
G1 X145.023 Y88.834 F10800.000
;WIPE_START
G1 F8640.000
G1 X146.965 Y91.366 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z0.900 F10800.000
G1 X151.564 Y119.388
G1 Z0.500
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X153.612 Y121.436 E0.15737
G1 X164.064 Y121.436 E0.56788
G1 X164.064 Y121.564 E0.00699
G1 X85.936 Y121.564 E4.24496
G1 X85.936 Y121.436 E0.00699
G1 X96.388 Y121.436 E0.56788
G1 X98.436 Y119.388 E0.15737
G1 X98.436 Y90.888 E1.54849
G1 X100.888 Y88.436 E0.18840
G1 X149.112 Y88.436 E2.62020
G1 X151.564 Y90.888 E0.18840
G1 X151.564 Y119.328 E1.54523
M204 S1000
M73 P6 R19
M73 Q6 S20
G1 X152.050 Y119.186 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X153.814 Y120.950 E0.16662
M73 Q6 S19
G1 X164.550 Y120.950 E0.71725
G1 X164.550 Y122.050 E0.07348
G1 X85.450 Y122.050 E5.28431
G1 X85.450 Y120.950 E0.07348
G1 X96.186 Y120.950 E0.71725
G1 X97.950 Y119.186 E0.16662
G1 X97.950 Y90.686 E1.90395
G1 X100.686 Y87.950 E0.25853
G1 X149.314 Y87.950 E3.24856
G1 X152.050 Y90.686 E0.25853
G1 X152.050 Y119.126 E1.89995
M204 S1000
G1 X151.860 Y119.538 F10800.000
;WIPE_START
G1 F8640.000
G1 X153.814 Y120.950 E-0.58578
G1 X154.568 Y120.950 E-0.17422
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z0.900 F10800.000
G1 X152.302 Y121.434
G1 Z0.500
G1 E0.80000 F2100.000
;TYPE:Solid infill
;WIDTH:0.510718
G1 F4800.000
G1 X152.725 Y121.011 E0.03331
G1 X152.410 Y120.695 E0.02485
G1 X151.867 Y121.238 E0.04272
G1 X151.236 Y121.238 E0.03514
G1 X152.094 Y120.379 E0.06757
G1 X151.779 Y120.064 E0.02485
G1 X150.605 Y121.238 E0.09242
G1 X149.974 Y121.238 E0.03514
G1 X151.463 Y119.748 E0.11726
G1 X151.238 Y119.523 E0.01774
G1 X151.238 Y119.342 E0.01005
G1 X149.342 Y121.238 E0.14922
G1 X148.711 Y121.238 E0.03514
G1 X151.238 Y118.711 E0.19891
G1 X151.238 Y118.080 E0.03514
G1 X148.080 Y121.238 E0.24861
G1 X147.449 Y121.238 E0.03514
G1 X151.238 Y117.449 E0.29830
G1 X151.238 Y116.817 E0.03514
G1 X146.817 Y121.238 E0.34800
G1 X146.186 Y121.238 E0.03514
G1 X151.238 Y116.186 E0.39769
G1 X151.238 Y115.555 E0.03514
G1 X145.359 Y121.434 E0.46282
;WIPE_START
G1 F8640.000
G1 X147.686 Y119.106 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z0.900 F10800.000
G1 X150.882 Y94.374
G1 Z0.500
G1 E0.80000 F2100.000
;WIDTH:0.501585
G1 F4800.000
G1 X151.238 Y94.018 E0.02745
G1 X151.238 Y93.400 E0.03372
G1 X150.711 Y93.926 E0.04060
G1 X150.402 Y93.617 E0.02384
G1 X151.238 Y92.781 E0.06444
G1 X151.238 Y92.163 E0.03372
G1 X150.093 Y93.308 E0.08828
G1 X149.784 Y92.999 E0.02384
G1 X151.238 Y91.545 E0.11212
G1 X151.238 Y91.023 E0.02845
G1 X151.189 Y90.975 E0.00372
G1 X149.475 Y92.689 E0.13224
G1 X149.165 Y92.380 E0.02384
G1 X150.880 Y90.665 E0.13224
G1 X150.571 Y90.356 E0.02384
G1 X148.856 Y92.071 E0.13224
G1 X148.547 Y91.762 E0.02384
G1 X150.262 Y90.047 E0.13224
G1 X149.953 Y89.738 E0.02384
G1 X148.238 Y91.453 E0.13224
G1 X147.929 Y91.144 E0.02384
G1 X149.644 Y89.429 E0.13224
G1 X149.334 Y89.120 E0.02384
G1 X147.620 Y90.834 E0.13224
G1 X147.311 Y90.525 E0.02384
G1 X149.025 Y88.811 E0.13224
G1 X148.977 Y88.762 E0.00372
G1 X148.455 Y88.762 E0.02846
G1 X147.001 Y90.216 E0.11212
G1 X146.692 Y89.907 E0.02384
G1 X147.837 Y88.762 E0.08828
G1 X147.219 Y88.762 E0.03372
G1 X146.383 Y89.598 E0.06444
G1 X146.074 Y89.289 E0.02384
G1 X146.600 Y88.762 E0.04060
G1 X145.982 Y88.762 E0.03372
G1 X145.626 Y89.118 E0.02745
;WIPE_START
G1 F8640.000
G1 X145.982 Y88.762 E-0.11621
G1 X146.600 Y88.762 E-0.14277
G1 X146.074 Y89.289 E-0.17190
G1 X146.383 Y89.598 E-0.10095
G1 X147.082 Y88.899 E-0.22816
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z0.900 F10800.000
G1 X98.566 Y91.248
G1 Z0.500
G1 E0.80000 F2100.000
;WIDTH:0.541167
G1 F4800.000
G1 X101.052 Y88.762 E0.20904
G1 X101.726 Y88.762 E0.04010
M73 Q7 S19
G1 X98.762 Y91.726 E0.24926
G1 X98.762 Y92.400 E0.04010
M73 P7 R19
G1 X102.400 Y88.762 E0.30597
G1 X103.075 Y88.762 E0.04010
G1 X98.762 Y93.075 E0.36267
G1 X98.762 Y93.749 E0.04010
G1 X103.749 Y88.762 E0.41938
G1 X104.423 Y88.762 E0.04010
G1 X98.566 Y94.619 E0.49257
;WIPE_START
G1 F8640.000
G1 X100.894 Y92.292 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z0.900 F10800.000
G1 X98.566 Y117.111
G1 Z0.500
G1 E0.80000 F2100.000
;WIDTH:0.513125
G1 F4800.000
G1 X99.012 Y116.666 E0.03525
G1 X99.356 Y116.957 E0.02520
G1 X98.762 Y117.550 E0.04695
G1 X98.762 Y118.185 E0.03552
G1 X99.699 Y117.248 E0.07417
G1 X100.043 Y117.538 E0.02520
G1 X98.762 Y118.819 E0.10139
G1 X98.762 Y119.454 E0.03552
G1 X100.387 Y117.829 E0.12860
G1 X100.731 Y118.120 E0.02520
G1 X97.613 Y121.238 E0.24678
G1 X98.248 Y121.238 E0.03552
G1 X101.075 Y118.411 E0.22376
G1 X101.419 Y118.702 E0.02520
G1 X98.882 Y121.238 E0.20074
G1 X99.517 Y121.238 E0.03552
G1 X101.762 Y118.992 E0.17773
G1 X102.106 Y119.283 E0.02520
G1 X100.152 Y121.238 E0.15471
G1 X100.786 Y121.238 E0.03552
G1 X102.450 Y119.574 E0.13169
G1 X102.794 Y119.865 E0.02520
G1 X101.421 Y121.238 E0.10868
G1 X102.056 Y121.238 E0.03552
G1 X103.138 Y120.155 E0.08566
G1 X103.482 Y120.446 E0.02520
G1 X102.690 Y121.238 E0.06264
G1 X103.325 Y121.238 E0.03552
G1 X103.825 Y120.737 E0.03963
G1 X104.169 Y121.028 E0.02520
G1 X103.763 Y121.434 E0.03213
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
M106 S170.85
;LAYER_CHANGE
;Z:0.8
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;0.8


;WIPE_START
G1 F8640.000
G1 X104.169 Y121.028 E-0.13254
G1 X103.825 Y120.737 E-0.10398
G1 X103.325 Y121.238 E-0.16348
G1 X102.690 Y121.238 E-0.14654
G1 X103.344 Y120.584 E-0.21346
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z0.900 F10800.000
;AFTER_LAYER_CHANGE
;0.8
G1 X150.324 Y85.270
G1 Z0.800
G1 E0.80000 F2100.000
;TYPE:Skirt
;WIDTH:0.42
G1 F2700.000
G1 X151.046 Y85.695 E0.03714
G1 X154.231 Y88.871 E0.19952
G1 X154.686 Y89.566 E0.03681
G1 X167.405 Y119.747 E1.45273
G1 X167.527 Y120.450 E0.03164
G1 X167.471 Y123.014 E0.11373
G1 X167.316 Y123.479 E0.02176
G1 X167.069 Y123.903 E0.02176
G1 X166.740 Y124.267 E0.02176
G1 X166.340 Y124.558 E0.02192
G1 X165.772 Y124.794 E0.02729
G1 X165.159 Y124.877 E0.02746
G1 X84.823 Y124.877 E3.56326
G1 X84.218 Y124.791 E0.02713
G1 X83.651 Y124.552 E0.02729
G1 X83.167 Y124.179 E0.02713
G1 X82.792 Y123.690 E0.02729
G1 X82.568 Y123.166 E0.02528
G1 X82.475 Y122.604 E0.02528
G1 X82.476 Y120.382 E0.09855
G1 X82.619 Y119.679 E0.03181
G1 X95.317 Y89.559 E1.44985
G1 X95.795 Y88.844 E0.03814
G1 X98.846 Y85.792 E0.19141
G1 X99.310 Y85.442 E0.02578
G1 X99.878 Y85.206 E0.02729
G1 X100.484 Y85.123 E0.02713
G1 X149.504 Y85.123 E2.17425
G1 X150.265 Y85.260 E0.03432
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;WIPE_START
G1 F8640.000
G1 X151.046 Y85.695 E-0.20641
G1 X152.744 Y87.388 E-0.55359
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z1.200 F10800.000
G1 X144.825 Y88.714
G1 Z0.800
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X151.286 Y95.175 E0.49639
G1 X151.286 Y114.825 E1.06769
G1 X144.825 Y121.286 E0.49639
G1 X105.212 Y121.286 E2.15229
G1 X98.714 Y115.790 E0.46238
G1 X98.714 Y95.175 E1.12011
G1 X105.175 Y88.714 E0.49639
G1 X144.765 Y88.714 E2.15108
M204 S1000
;WIPE_START
M73 P8 R19
M73 Q8 S19
G1 F8640.000
G1 X147.104 Y91.031 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z1.200 F10800.000
G1 X99.200 Y115.565
G1 Z0.800
G1 E0.80000 F2100.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 X99.200 Y95.376 E1.34875
G1 X105.376 Y89.200 E0.58347
G1 X144.624 Y89.200 E2.62201
G1 X150.800 Y95.376 E0.58347
G1 X150.800 Y114.624 E1.28591
G1 X144.624 Y120.800 E0.58347
G1 X105.390 Y120.800 E2.62105
G1 X99.246 Y115.604 E0.53758
M204 S1000
G1 X98.800 Y115.550 F10800.000
;WIPE_START
G1 F8640.000
G1 X99.238 Y112.312 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z1.200 F10800.000
G1 X96.325 Y121.286
G1 Z0.800
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X164.364 Y121.286 E0.58081
G1 X164.364 Y121.714 E0.02330
G1 X85.636 Y121.714 E4.27756
G1 X85.636 Y121.286 E0.02330
G1 X96.265 Y121.286 E0.57755
M204 S1000
G1 X96.124 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
M73 P9 R19
M73 Q9 S19
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X164.850 Y120.800 E0.73314
G1 X164.850 Y122.200 E0.09353
G1 X85.150 Y122.200 E5.32439
G1 X85.150 Y120.800 E0.09353
G1 X96.064 Y120.800 E0.72913
M204 S1000
G1 X96.479 Y120.985 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.800 Y119.124 E-0.55709
G1 X97.800 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z1.200 F10800.000
G1 X97.350 Y121.584
G1 Z0.800
G1 E0.80000 F2100.000
;TYPE:Solid infill
;WIDTH:0.517638
G1 F4800.000
G1 X96.920 Y121.153 E0.03440
G1 X97.240 Y120.833 E0.02562
G1 X97.795 Y121.388 E0.04436
G1 X98.436 Y121.388 E0.03624
G1 X97.561 Y120.512 E0.06998
G1 X97.881 Y120.192 E0.02562
G1 X99.077 Y121.388 E0.09560
G1 X99.718 Y121.388 E0.03624
G1 X98.202 Y119.871 E0.12123
G1 X98.522 Y119.551 E0.02562
G1 X100.359 Y121.388 E0.14685
G1 X101.000 Y121.388 E0.03624
G1 X98.612 Y119.000 E0.19089
G1 X98.612 Y118.359 E0.03624
G1 X101.641 Y121.388 E0.24214
G1 X102.282 Y121.388 E0.03624
G1 X98.612 Y117.718 E0.29339
G1 X98.612 Y117.077 E0.03624
G1 X102.923 Y121.388 E0.34464
G1 X103.564 Y121.388 E0.03624
G1 X98.612 Y116.436 E0.39588
G1 X98.612 Y116.132 E0.01719
G1 X100.795 Y117.978 E0.16164
G1 X104.401 Y121.584 E0.28826
;WIPE_START
G1 F8640.000
G1 X102.074 Y119.256 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z1.200 F10800.000
G1 X98.416 Y94.155
G1 Z0.800
G1 E0.80000 F2100.000
;WIDTH:0.515255
G1 F4800.000
G1 X98.844 Y94.583 E0.03402
G1 X99.163 Y94.264 E0.02536
G1 X98.612 Y93.713 E0.04379
G1 X98.612 Y93.076 E0.03586
G1 X99.482 Y93.945 E0.06914
G1 X99.801 Y93.626 E0.02536
G1 X98.612 Y92.438 E0.09450
G1 X98.612 Y91.801 E0.03586
G1 X100.119 Y93.308 E0.11985
G1 X100.438 Y92.989 E0.02536
G1 X98.612 Y91.163 E0.14521
G1 X98.612 Y90.961 E0.01137
G1 X98.830 Y90.743 E0.01732
G1 X100.757 Y92.670 E0.15325
G1 X101.076 Y92.351 E0.02536
G1 X99.149 Y90.424 E0.15325
G1 X99.468 Y90.105 E0.02536
G1 X101.395 Y92.032 E0.15325
G1 X101.713 Y91.713 E0.02536
G1 X99.786 Y89.787 E0.15325
G1 X100.105 Y89.468 E0.02536
G1 X102.032 Y91.395 E0.15325
G1 X102.351 Y91.076 E0.02536
G1 X100.424 Y89.149 E0.15325
G1 X100.743 Y88.830 E0.02536
G1 X102.670 Y90.757 E0.15325
G1 X102.989 Y90.438 E0.02536
G1 X101.163 Y88.612 E0.14521
G1 X101.800 Y88.612 E0.03586
G1 X103.308 Y90.119 E0.11986
G1 X103.626 Y89.801 E0.02536
G1 X102.438 Y88.612 E0.09450
G1 X103.076 Y88.612 E0.03586
G1 X103.945 Y89.482 E0.06915
G1 X104.264 Y89.163 E0.02536
G1 X103.713 Y88.612 E0.04379
G1 X104.351 Y88.612 E0.03586
G1 X104.721 Y88.983 E0.02946
;WIPE_START
G1 F8640.000
G1 X104.351 Y88.612 E-0.12097
G1 X103.713 Y88.612 E-0.14723
G1 X104.264 Y89.163 E-0.17981
G1 X103.945 Y89.482 E-0.10411
G1 X103.309 Y88.845 E-0.20788
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z1.200 F10800.000
G1 X145.001 Y88.416
G1 Z0.800
G1 E0.80000 F2100.000
;WIDTH:0.515912
G1 F4800.000
G1 X151.388 Y94.803 E0.50870
G1 X151.388 Y94.165 E0.03596
G1 X145.835 Y88.612 E0.44223
M73 P9 R18
G1 X146.474 Y88.612 E0.03596
G1 X151.388 Y93.526 E0.39137
G1 X151.388 Y92.888 E0.03596
G1 X147.112 Y88.612 E0.34052
G1 X147.751 Y88.612 E0.03596
G1 X151.388 Y92.249 E0.28966
G1 X151.388 Y91.611 E0.03596
G1 X148.389 Y88.612 E0.23880
G1 X149.028 Y88.612 E0.03596
G1 X151.584 Y91.168 E0.20355
;WIPE_START
G1 F8640.000
G1 X149.256 Y88.841 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z1.200 F10800.000
G1 X151.584 Y115.845
G1 Z0.800
G1 E0.80000 F2100.000
;WIDTH:0.515255
G1 F4800.000
G1 X151.156 Y115.417 E0.03403
G1 X150.837 Y115.736 E0.02536
M73 Q10 S19
G1 X151.388 Y116.287 E0.04379
G1 X151.388 Y116.924 E0.03586
G1 X150.518 Y116.055 E0.06915
G1 X150.199 Y116.374 E0.02536
M73 P10 R18
G1 X151.388 Y117.562 E0.09450
G1 X151.388 Y118.200 E0.03586
G1 X149.881 Y116.692 E0.11986
G1 X149.562 Y117.011 E0.02536
G1 X151.388 Y118.837 E0.14521
G1 X151.388 Y119.461 E0.03506
G1 X153.315 Y121.388 E0.15325
G1 X149.243 Y117.330 E0.32326
G1 X148.924 Y117.649 E0.02536
G1 X152.663 Y121.388 E0.29734
G1 X152.025 Y121.388 E0.03586
G1 X148.605 Y117.968 E0.27198
G1 X148.286 Y118.287 E0.02536
G1 X151.388 Y121.388 E0.24663
G1 X150.750 Y121.388 E0.03586
G1 X147.968 Y118.605 E0.22127
G1 X147.649 Y118.924 E0.02536
G1 X150.112 Y121.388 E0.19592
G1 X149.475 Y121.388 E0.03586
G1 X147.330 Y119.243 E0.17056
G1 X147.011 Y119.562 E0.02536
G1 X148.837 Y121.388 E0.14521
G1 X148.199 Y121.388 E0.03586
G1 X146.692 Y119.881 E0.11985
G1 X146.374 Y120.199 E0.02536
G1 X147.562 Y121.388 E0.09450
G1 X146.924 Y121.388 E0.03586
G1 X146.055 Y120.518 E0.06914
G1 X145.736 Y120.837 E0.02536
G1 X146.287 Y121.388 E0.04379
G1 X145.649 Y121.388 E0.03586
G1 X145.279 Y121.017 E0.02946
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
M106 S255
;LAYER_CHANGE
;Z:1.1
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;1.1


;WIPE_START
G1 F8640.000
G1 X145.649 Y121.388 E-0.12095
G1 X146.287 Y121.388 E-0.14723
G1 X145.736 Y120.837 E-0.17979
G1 X146.055 Y120.518 E-0.10411
G1 X146.692 Y121.155 E-0.20792
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z1.200 F10800.000
;AFTER_LAYER_CHANGE
;1.1
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X151.286 Y114.825
G1 Z1.100
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X144.825 Y121.286 E0.49639
G1 X105.212 Y121.286 E2.15229
G1 X98.714 Y115.790 E0.46238
G1 X98.714 Y95.175 E1.12011
G1 X105.175 Y88.714 E0.49639
G1 X144.825 Y88.714 E2.15434
G1 X151.286 Y95.175 E0.49639
G1 X151.286 Y114.765 E1.06443
M204 S1000
G1 X150.800 Y114.624 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X144.624 Y120.800 E0.58347
G1 X105.390 Y120.800 E2.62105
G1 X99.200 Y115.565 E0.54159
G1 X99.200 Y95.376 E1.34875
G1 X105.376 Y89.200 E0.58347
G1 X144.624 Y89.200 E2.62201
G1 X150.800 Y95.376 E0.58347
G1 X150.800 Y114.564 E1.28190
M204 S1000
G1 X151.027 Y114.954 F10800.000
;WIPE_START
G1 F8640.000
G1 X148.484 Y116.903 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z1.500 F10800.000
G1 X151.714 Y119.325
M73 Q10 S18
G1 Z1.100
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X153.675 Y121.286 E0.15062
G1 X164.664 Y121.286 E0.59711
G1 X164.664 Y121.714 E0.02330
G1 X85.336 Y121.714 E4.31016
M73 P11 R18
M73 Q11 S18
G1 X85.336 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.59711
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.265 E1.54523
M204 S1000
G1 X152.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X153.876 Y120.800 E0.15832
G1 X165.150 Y120.800 E0.75318
G1 X165.150 Y122.200 E0.09353
G1 X84.850 Y122.200 E5.36447
G1 X84.850 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.75318
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.064 E1.89995
M204 S1000
G1 X152.010 Y119.477 F10800.000
;WIPE_START
G1 F8640.000
G1 X153.876 Y120.800 E-0.55709
G1 X154.755 Y120.800 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z1.500 F10800.000
G1 X152.680 Y121.584
G1 Z1.100
G1 E0.80000 F2100.000
;TYPE:Solid infill
;WIDTH:0.516849
G1 F4800.000
G1 X153.095 Y121.168 E0.03315
G1 X152.775 Y120.848 E0.02553
G1 X152.236 Y121.388 E0.04304
G1 X151.596 Y121.388 E0.03611
G1 X152.455 Y120.528 E0.06858
G1 X152.135 Y120.208 E0.02553
G1 X150.956 Y121.388 E0.09411
G1 X150.316 Y121.388 E0.03611
G1 X151.815 Y119.889 E0.11965
G1 X151.496 Y119.569 E0.02553
G1 X149.676 Y121.388 E0.14518
G1 X149.037 Y121.388 E0.03611
G1 X151.388 Y119.037 E0.18764
G1 X151.388 Y118.397 E0.03611
G1 X148.397 Y121.388 E0.23871
G1 X147.757 Y121.388 E0.03611
G1 X151.388 Y117.757 E0.28978
G1 X151.388 Y117.117 E0.03611
G1 X147.117 Y121.388 E0.34085
G1 X146.477 Y121.388 E0.03611
G1 X151.388 Y116.477 E0.39192
G1 X151.388 Y115.837 E0.03611
G1 X145.837 Y121.388 E0.44299
G1 X145.197 Y121.388 E0.03611
G1 X151.584 Y115.001 E0.50971
;WIPE_START
G1 F8640.000
G1 X149.256 Y117.329 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z1.500 F10800.000
G1 X151.017 Y94.721
M73 P12 R18
M73 Q12 S18
G1 Z1.100
G1 E0.80000 F2100.000
;WIDTH:0.515255
G1 F4800.000
G1 X151.388 Y94.351 E0.02946
G1 X151.388 Y93.713 E0.03586
G1 X150.837 Y94.264 E0.04379
G1 X150.518 Y93.945 E0.02536
G1 X151.388 Y93.076 E0.06915
G1 X151.388 Y92.438 E0.03586
G1 X150.199 Y93.626 E0.09450
G1 X149.881 Y93.308 E0.02536
G1 X151.388 Y91.800 E0.11986
G1 X151.388 Y91.163 E0.03586
G1 X149.562 Y92.989 E0.14521
G1 X149.243 Y92.670 E0.02536
G1 X151.170 Y90.743 E0.15325
G1 X150.851 Y90.424 E0.02536
G1 X148.924 Y92.351 E0.15325
G1 X148.605 Y92.032 E0.02536
G1 X150.532 Y90.105 E0.15325
G1 X150.213 Y89.786 E0.02536
G1 X148.286 Y91.713 E0.15325
G1 X147.968 Y91.395 E0.02536
G1 X149.895 Y89.468 E0.15325
G1 X149.576 Y89.149 E0.02536
G1 X147.649 Y91.076 E0.15325
G1 X147.330 Y90.757 E0.02536
G1 X149.257 Y88.830 E0.15325
G1 X149.039 Y88.612 E0.01732
G1 X148.837 Y88.612 E0.01137
G1 X147.011 Y90.438 E0.14521
G1 X146.692 Y90.119 E0.02536
G1 X148.199 Y88.612 E0.11985
G1 X147.562 Y88.612 E0.03586
G1 X146.374 Y89.801 E0.09450
G1 X146.055 Y89.482 E0.02536
G1 X146.924 Y88.612 E0.06914
G1 X146.287 Y88.612 E0.03586
G1 X145.736 Y89.163 E0.04379
G1 X145.417 Y88.844 E0.02536
G1 X145.845 Y88.416 E0.03402
;WIPE_START
G1 F8640.000
G1 X145.417 Y88.844 E-0.13970
G1 X145.736 Y89.163 E-0.10411
G1 X146.287 Y88.612 E-0.17979
G1 X146.924 Y88.612 E-0.14723
G1 X146.345 Y89.192 E-0.18918
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z1.500 F10800.000
G1 X101.168 Y88.416
G1 Z1.100
G1 E0.80000 F2100.000
;WIDTH:0.515912
G1 F4800.000
G1 X98.612 Y90.972 E0.20354
G1 X98.612 Y91.610 E0.03596
G1 X101.610 Y88.612 E0.23879
G1 X102.249 Y88.612 E0.03596
G1 X98.612 Y92.249 E0.28965
G1 X98.612 Y92.888 E0.03596
G1 X102.888 Y88.612 E0.34050
G1 X103.526 Y88.612 E0.03596
G1 X98.612 Y93.526 E0.39136
G1 X98.612 Y94.165 E0.03596
G1 X104.165 Y88.612 E0.44222
G1 X104.803 Y88.612 E0.03596
G1 X98.416 Y94.999 E0.50869
;WIPE_START
G1 F8640.000
G1 X100.744 Y92.672 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z1.500 F10800.000
G1 X98.416 Y116.770
G1 Z1.100
G1 E0.80000 F2100.000
;WIDTH:0.504773
G1 F4800.000
G1 X98.852 Y116.335 E0.03385
G1 X99.190 Y116.620 E0.02427
G1 X98.612 Y117.197 E0.04484
G1 X98.612 Y117.820 E0.03421
G1 X99.527 Y116.905 E0.07105
G1 X99.864 Y117.191 E0.02427
G1 X98.612 Y118.443 E0.09726
G1 X98.612 Y119.066 E0.03421
G1 X100.202 Y117.476 E0.12347
G1 X100.539 Y117.761 E0.02427
G1 X97.013 Y121.288 E0.27395
G1 X97.112 Y121.388 E0.00773
G1 X97.536 Y121.388 E0.02328
G1 X100.877 Y118.047 E0.25952
G1 X101.214 Y118.332 E0.02427
G1 X98.159 Y121.388 E0.23735
G1 X98.782 Y121.388 E0.03421
G1 X101.552 Y118.618 E0.21518
G1 X101.889 Y118.903 E0.02427
G1 X99.404 Y121.388 E0.19301
G1 X100.027 Y121.388 E0.03421
G1 X102.226 Y119.188 E0.17084
G1 X102.564 Y119.474 E0.02427
G1 X100.650 Y121.388 E0.14868
G1 X101.273 Y121.388 E0.03421
G1 X102.901 Y119.759 E0.12651
G1 X103.239 Y120.044 E0.02427
G1 X101.896 Y121.388 E0.10434
G1 X102.518 Y121.388 E0.03421
G1 X103.576 Y120.330 E0.08217
G1 X103.914 Y120.615 E0.02427
G1 X103.141 Y121.388 E0.06001
G1 X103.764 Y121.388 E0.03421
G1 X104.251 Y120.901 E0.03784
G1 X104.589 Y121.186 E0.02427
G1 X104.191 Y121.584 E0.03090
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:1.4
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;1.4


;WIPE_START
G1 F8640.000
G1 X104.589 Y121.186 E-0.12989
G1 X104.251 Y120.901 E-0.10204
G1 X103.764 Y121.388 E-0.15906
G1 X103.141 Y121.388 E-0.14381
G1 X103.831 Y120.698 E-0.22520
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z1.500 F10800.000
;AFTER_LAYER_CHANGE
;1.4
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X105.212 Y121.286
G1 Z1.400
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.714 Y115.790 E0.46238
G1 X98.714 Y95.175 E1.12011
G1 X105.175 Y88.714 E0.49639
G1 X144.825 Y88.714 E2.15434
G1 X151.286 Y95.175 E0.49639
G1 X151.286 Y114.825 E1.06769
G1 X144.825 Y121.286 E0.49639
G1 X105.272 Y121.286 E2.14903
M204 S1000
G1 X105.390 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y115.565 E0.54159
G1 X99.200 Y95.376 E1.34875
G1 X105.376 Y89.200 E0.58347
G1 X144.624 Y89.200 E2.62201
M73 P13 R18
M73 Q13 S18
G1 X150.800 Y95.376 E0.58347
G1 X150.800 Y114.624 E1.28591
G1 X144.624 Y120.800 E0.58347
G1 X105.450 Y120.800 E2.61704
M204 S1000
G1 X105.066 Y121.034 F10800.000
;WIPE_START
G1 F8640.000
G1 X102.927 Y118.687 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z1.800 F10800.000
G1 X96.325 Y121.286
G1 Z1.400
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X164.964 Y121.286 E0.61341
G1 X164.964 Y121.714 E0.02330
G1 X85.036 Y121.714 E4.34276
G1 X85.036 Y121.286 E0.02330
G1 X96.265 Y121.286 E0.61015
M204 S1000
G1 X96.124 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X165.450 Y120.800 E0.77322
G1 X165.450 Y122.200 E0.09353
G1 X84.550 Y122.200 E5.40456
M73 P14 R18
M73 Q14 S18
G1 X84.550 Y120.800 E0.09353
G1 X96.064 Y120.800 E0.76922
M204 S1000
G1 X96.478 Y120.986 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.800 Y119.124 E-0.55709
G1 X97.800 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z1.800 F10800.000
G1 X97.322 Y121.584
G1 Z1.400
G1 E0.80000 F2100.000
;TYPE:Solid infill
;WIDTH:0.519239
G1 F4800.000
G1 X96.906 Y121.168 E0.03339
G1 X97.227 Y120.846 E0.02581
G1 X97.769 Y121.388 E0.04347
G1 X98.412 Y121.388 E0.03649
G1 X97.549 Y120.524 E0.06927
G1 X97.870 Y120.203 E0.02581
G1 X99.055 Y121.388 E0.09508
G1 X99.699 Y121.388 E0.03649
G1 X98.192 Y119.881 E0.12088
G1 X98.514 Y119.559 E0.02581
G1 X100.342 Y121.388 E0.14669
G1 X100.985 Y121.388 E0.03649
G1 X98.612 Y119.015 E0.19039
G1 X98.612 Y118.371 E0.03649
G1 X101.629 Y121.388 E0.24200
G1 X102.272 Y121.388 E0.03649
G1 X98.612 Y117.728 E0.29361
G1 X98.612 Y117.085 E0.03649
G1 X102.915 Y121.388 E0.34522
G1 X103.558 Y121.388 E0.03649
G1 X98.612 Y116.442 E0.39683
G1 X98.612 Y116.132 E0.01758
G1 X100.773 Y117.960 E0.16057
G1 X104.398 Y121.584 E0.29077
;WIPE_START
G1 F8640.000
G1 X102.070 Y119.256 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z1.800 F10800.000
G1 X98.416 Y94.155
G1 Z1.400
G1 E0.80000 F2100.000
;WIDTH:0.515255
G1 F4800.000
G1 X98.844 Y94.583 E0.03402
G1 X99.163 Y94.264 E0.02536
G1 X98.612 Y93.713 E0.04379
G1 X98.612 Y93.076 E0.03586
G1 X99.482 Y93.945 E0.06914
G1 X99.801 Y93.626 E0.02536
G1 X98.612 Y92.438 E0.09450
G1 X98.612 Y91.801 E0.03586
G1 X100.119 Y93.308 E0.11985
G1 X100.438 Y92.989 E0.02536
G1 X98.612 Y91.163 E0.14521
G1 X98.612 Y90.961 E0.01137
G1 X98.830 Y90.743 E0.01732
G1 X100.757 Y92.670 E0.15325
G1 X101.076 Y92.351 E0.02536
G1 X99.149 Y90.424 E0.15325
G1 X99.468 Y90.105 E0.02536
G1 X101.395 Y92.032 E0.15325
G1 X101.713 Y91.713 E0.02536
G1 X99.786 Y89.787 E0.15325
G1 X100.105 Y89.468 E0.02536
G1 X102.032 Y91.395 E0.15325
G1 X102.351 Y91.076 E0.02536
G1 X100.424 Y89.149 E0.15325
G1 X100.743 Y88.830 E0.02536
G1 X102.670 Y90.757 E0.15325
G1 X102.989 Y90.438 E0.02536
G1 X101.163 Y88.612 E0.14521
G1 X101.800 Y88.612 E0.03586
G1 X103.308 Y90.119 E0.11986
G1 X103.626 Y89.801 E0.02536
G1 X102.438 Y88.612 E0.09450
G1 X103.076 Y88.612 E0.03586
G1 X103.945 Y89.482 E0.06915
G1 X104.264 Y89.163 E0.02536
G1 X103.713 Y88.612 E0.04379
G1 X104.351 Y88.612 E0.03586
G1 X104.721 Y88.983 E0.02946
;WIPE_START
G1 F8640.000
G1 X104.351 Y88.612 E-0.12097
G1 X103.713 Y88.612 E-0.14723
G1 X104.264 Y89.163 E-0.17981
G1 X103.945 Y89.482 E-0.10411
G1 X103.309 Y88.845 E-0.20788
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z1.800 F10800.000
G1 X145.001 Y88.416
G1 Z1.400
G1 E0.80000 F2100.000
;WIDTH:0.515912
G1 F4800.000
G1 X151.388 Y94.803 E0.50870
G1 X151.388 Y94.165 E0.03596
G1 X145.835 Y88.612 E0.44223
G1 X146.474 Y88.612 E0.03596
G1 X151.388 Y93.526 E0.39137
G1 X151.388 Y92.888 E0.03596
G1 X147.112 Y88.612 E0.34052
G1 X147.751 Y88.612 E0.03596
G1 X151.388 Y92.249 E0.28966
G1 X151.388 Y91.611 E0.03596
G1 X148.389 Y88.612 E0.23880
G1 X149.028 Y88.612 E0.03596
G1 X151.584 Y91.168 E0.20355
;WIPE_START
G1 F8640.000
G1 X149.256 Y88.841 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z1.800 F10800.000
G1 X151.584 Y115.845
M73 P14 R17
G1 Z1.400
G1 E0.80000 F2100.000
;WIDTH:0.515255
G1 F4800.000
G1 X151.156 Y115.417 E0.03403
G1 X150.837 Y115.736 E0.02536
G1 X151.388 Y116.287 E0.04379
G1 X151.388 Y116.924 E0.03586
G1 X150.518 Y116.055 E0.06915
G1 X150.199 Y116.374 E0.02536
G1 X151.388 Y117.562 E0.09450
G1 X151.388 Y118.200 E0.03586
G1 X149.881 Y116.692 E0.11986
G1 X149.562 Y117.011 E0.02536
G1 X151.388 Y118.837 E0.14521
G1 X151.388 Y119.461 E0.03506
G1 X153.094 Y121.181 E0.13628
G1 X149.243 Y117.330 E0.30628
G1 X148.924 Y117.649 E0.02536
G1 X152.663 Y121.388 E0.29734
G1 X152.025 Y121.388 E0.03586
G1 X148.605 Y117.968 E0.27198
G1 X148.286 Y118.287 E0.02536
G1 X151.388 Y121.388 E0.24663
G1 X150.750 Y121.388 E0.03586
G1 X147.968 Y118.605 E0.22127
G1 X147.649 Y118.924 E0.02536
G1 X150.112 Y121.388 E0.19592
G1 X149.475 Y121.388 E0.03586
G1 X147.330 Y119.243 E0.17056
G1 X147.011 Y119.562 E0.02536
G1 X148.837 Y121.388 E0.14521
G1 X148.199 Y121.388 E0.03586
G1 X146.692 Y119.881 E0.11985
G1 X146.374 Y120.199 E0.02536
G1 X147.562 Y121.388 E0.09450
G1 X146.924 Y121.388 E0.03586
G1 X146.055 Y120.518 E0.06914
G1 X145.736 Y120.837 E0.02536
G1 X146.287 Y121.388 E0.04379
G1 X145.649 Y121.388 E0.03586
G1 X145.279 Y121.017 E0.02946
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:1.7
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;1.7


;WIPE_START
G1 F8640.000
G1 X145.649 Y121.388 E-0.12095
G1 X146.287 Y121.388 E-0.14723
G1 X145.736 Y120.837 E-0.17979
G1 X146.055 Y120.518 E-0.10411
G1 X146.692 Y121.155 E-0.20792
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z1.800 F10800.000
;AFTER_LAYER_CHANGE
;1.7
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X151.286 Y114.896
G1 Z1.700
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X144.896 Y121.286 E0.49096
G1 X105.135 Y121.286 E2.16034
M73 P15 R17
M73 Q15 S18
G1 X98.714 Y115.856 E0.45687
G1 X98.714 Y95.175 E1.12367
G1 X105.175 Y88.714 E0.49639
G1 X144.896 Y88.714 E2.15818
G1 X151.286 Y95.104 E0.49096
G1 X151.286 Y114.836 E1.07211
M204 S1000
G1 X150.800 Y114.695 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X144.695 Y120.800 E0.57679
G1 X105.313 Y120.800 E2.63095
G1 X99.200 Y115.630 E0.53482
G1 X99.200 Y95.376 E1.35313
G1 X105.376 Y89.200 E0.58347
G1 X144.695 Y89.200 E2.62674
G1 X150.800 Y95.305 E0.57679
G1 X150.800 Y114.635 E1.29135
M204 S1000
G1 X151.026 Y115.025 F10800.000
;WIPE_START
G1 F8640.000
G1 X148.484 Y116.974 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z2.100 F10800.000
G1 X151.714 Y119.325
G1 Z1.700
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X153.675 Y121.286 E0.15062
G1 X165.264 Y121.286 E0.62971
G1 X165.264 Y121.714 E0.02330
G1 X84.736 Y121.714 E4.37536
M73 Q15 S17
G1 X84.736 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.62971
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.265 E1.54523
M204 S1000
M73 P16 R17
M73 Q16 S17
G1 X152.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X153.876 Y120.800 E0.15832
G1 X165.750 Y120.800 E0.79327
G1 X165.750 Y122.200 E0.09353
G1 X84.250 Y122.200 E5.44464
G1 X84.250 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.79327
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.064 E1.89995
M204 S1000
G1 X152.010 Y119.477 F10800.000
;WIPE_START
G1 F8640.000
G1 X153.876 Y120.800 E-0.55709
G1 X154.755 Y120.800 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z2.100 F10800.000
G1 X152.683 Y121.584
G1 Z1.700
G1 E0.80000 F2100.000
;TYPE:Solid infill
;WIDTH:0.513003
G1 F4800.000
G1 X153.097 Y121.170 E0.03276
G1 X152.779 Y120.852 E0.02510
G1 X152.244 Y121.388 E0.04235
G1 X151.610 Y121.388 E0.03550
G1 X152.462 Y120.535 E0.06746
G1 X152.145 Y120.218 E0.02510
G1 X150.975 Y121.388 E0.09256
G1 X150.341 Y121.388 E0.03550
G1 X151.828 Y119.901 E0.11766
G1 X151.510 Y119.584 E0.02510
G1 X149.706 Y121.388 E0.14276
G1 X149.072 Y121.388 E0.03550
G1 X151.388 Y119.072 E0.18325
G1 X151.388 Y118.437 E0.03550
G1 X148.437 Y121.388 E0.23346
G1 X147.803 Y121.388 E0.03550
G1 X151.388 Y117.803 E0.28366
G1 X151.388 Y117.169 E0.03550
G1 X147.169 Y121.388 E0.33387
G1 X146.534 Y121.388 E0.03550
G1 X151.388 Y116.534 E0.38407
G1 X151.388 Y115.900 E0.03550
G1 X145.900 Y121.388 E0.43428
G1 X145.265 Y121.388 E0.03550
G1 X151.584 Y115.069 E0.49999
;WIPE_START
G1 F8640.000
G1 X149.256 Y117.397 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z2.100 F10800.000
G1 X151.022 Y94.656
G1 Z1.700
G1 E0.80000 F2100.000
;WIDTH:0.510493
G1 F4800.000
G1 X151.388 Y94.290 E0.02875
G1 X151.388 Y93.659 E0.03510
G1 X150.845 Y94.202 E0.04267
G1 X150.530 Y93.886 E0.02482
G1 X151.388 Y93.029 E0.06749
G1 X151.388 Y92.398 E0.03510
G1 X150.215 Y93.571 E0.09231
G1 X149.899 Y93.255 E0.02482
G1 X151.388 Y91.767 E0.11713
G1 X151.388 Y91.136 E0.03510
G1 X149.584 Y92.940 E0.14196
G1 X149.268 Y92.624 E0.02482
G1 X151.160 Y90.733 E0.14885
G1 X150.844 Y90.417 E0.02482
G1 X148.953 Y92.309 E0.14885
G1 X148.637 Y91.994 E0.02482
G1 X150.529 Y90.102 E0.14885
G1 X150.213 Y89.786 E0.02482
G1 X148.322 Y91.678 E0.14885
G1 X148.006 Y91.363 E0.02482
G1 X149.898 Y89.471 E0.14885
G1 X149.583 Y89.156 E0.02482
G1 X147.691 Y91.047 E0.14885
G1 X147.376 Y90.732 E0.02482
G1 X149.267 Y88.840 E0.14885
G1 X149.039 Y88.612 E0.01793
G1 X148.864 Y88.612 E0.00975
G1 X147.060 Y90.416 E0.14195
G1 X146.745 Y90.101 E0.02482
G1 X148.233 Y88.612 E0.11713
G1 X147.602 Y88.612 E0.03510
G1 X146.429 Y89.785 E0.09231
G1 X146.114 Y89.470 E0.02482
G1 X146.971 Y88.612 E0.06748
G1 X146.340 Y88.612 E0.03510
G1 X145.798 Y89.154 E0.04266
G1 X145.483 Y88.839 E0.02482
G1 X145.906 Y88.416 E0.03327
;WIPE_START
G1 F8640.000
G1 X145.483 Y88.839 E-0.13805
G1 X145.798 Y89.154 E-0.10301
G1 X146.340 Y88.612 E-0.17704
G1 X146.971 Y88.612 E-0.14568
G1 X146.370 Y89.213 E-0.19623
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z2.100 F10800.000
G1 X101.168 Y88.416
M73 P17 R17
G1 Z1.700
G1 E0.80000 F2100.000
;WIDTH:0.515912
G1 F4800.000
G1 X98.612 Y90.972 E0.20354
M73 Q17 S17
G1 X98.612 Y91.610 E0.03596
G1 X101.610 Y88.612 E0.23879
G1 X102.249 Y88.612 E0.03596
G1 X98.612 Y92.249 E0.28965
G1 X98.612 Y92.888 E0.03596
G1 X102.888 Y88.612 E0.34050
G1 X103.526 Y88.612 E0.03596
G1 X98.612 Y93.526 E0.39136
G1 X98.612 Y94.165 E0.03596
G1 X104.165 Y88.612 E0.44222
G1 X104.803 Y88.612 E0.03596
G1 X98.416 Y94.999 E0.50869
;WIPE_START
G1 F8640.000
G1 X100.744 Y92.672 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z2.100 F10800.000
G1 X99.012 Y116.278
G1 Z1.700
G1 E0.80000 F2100.000
;WIDTH:0.522633
G1 F4800.000
G1 X98.612 Y116.678 E0.03228
G1 X98.612 Y117.326 E0.03704
G1 X99.224 Y116.714 E0.04942
G1 X99.575 Y117.011 E0.02628
G1 X98.612 Y117.974 E0.07780
G1 X98.612 Y118.622 E0.03704
G1 X99.926 Y117.308 E0.10618
G1 X100.277 Y117.605 E0.02628
G1 X98.612 Y119.270 E0.13457
G1 X98.612 Y119.461 E0.01090
G1 X96.899 Y121.174 E0.13851
G1 X97.112 Y121.388 E0.01725
G1 X97.143 Y121.388 E0.00175
G1 X100.628 Y117.902 E0.28173
G1 X100.979 Y118.199 E0.02628
G1 X97.791 Y121.388 E0.25773
G1 X98.439 Y121.388 E0.03704
G1 X101.330 Y118.496 E0.23373
G1 X101.682 Y118.793 E0.02628
G1 X99.087 Y121.388 E0.20973
G1 X99.735 Y121.388 E0.03704
G1 X102.033 Y119.090 E0.18572
G1 X102.384 Y119.387 E0.02628
G1 X100.383 Y121.388 E0.16172
G1 X101.031 Y121.388 E0.03704
G1 X102.735 Y119.684 E0.13772
G1 X103.086 Y119.981 E0.02628
G1 X101.679 Y121.388 E0.11372
G1 X102.327 Y121.388 E0.03704
G1 X103.437 Y120.278 E0.08972
G1 X103.788 Y120.575 E0.02628
G1 X102.975 Y121.388 E0.06571
G1 X103.623 Y121.388 E0.03704
G1 X104.139 Y120.872 E0.04171
G1 X104.491 Y121.169 E0.02628
G1 X104.075 Y121.584 E0.03356
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:2
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;2


;WIPE_START
G1 F8640.000
G1 X104.491 Y121.169 E-0.13556
G1 X104.139 Y120.872 E-0.10618
G1 X103.623 Y121.388 E-0.16851
G1 X102.975 Y121.388 E-0.14964
G1 X103.588 Y120.775 E-0.20011
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z2.100 F10800.000
;AFTER_LAYER_CHANGE
;2
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X104.670 Y121.286
G1 Z2.000
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.714 Y116.249 E0.42381
G1 X98.714 Y95.175 E1.14501
G1 X105.175 Y88.714 E0.49639
G1 X145.320 Y88.714 E2.18124
G1 X151.286 Y94.680 E0.45836
G1 X151.286 Y115.320 E1.12147
G1 X145.320 Y121.286 E0.45836
G1 X104.730 Y121.286 E2.20537
M204 S1000
G1 X104.848 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y116.023 E0.49417
G1 X99.200 Y95.376 E1.37937
G1 X105.376 Y89.200 E0.58347
G1 X145.119 Y89.200 E2.65508
G1 X150.800 Y94.881 E0.53670
G1 X150.800 Y115.119 E1.35204
G1 X145.119 Y120.800 E0.53670
G1 X104.908 Y120.800 E2.68632
M204 S1000
G1 X104.523 Y121.032 F10800.000
;WIPE_START
G1 F8640.000
G1 X102.384 Y118.688 E-0.76000
;WIPE_END
M73 P18 R17
G1 E-0.04000 F2100.000
G1 Z2.400 F10800.000
G1 X96.325 Y121.286
G1 Z2.000
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
M73 Q18 S17
G1 F3000.000
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X165.564 Y121.286 E0.64601
G1 X165.564 Y121.714 E0.02330
G1 X84.436 Y121.714 E4.40796
G1 X84.436 Y121.286 E0.02330
G1 X96.265 Y121.286 E0.64275
M204 S1000
G1 X96.124 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X166.050 Y120.800 E0.81331
G1 X166.050 Y122.200 E0.09353
G1 X83.950 Y122.200 E5.48472
G1 X83.950 Y120.800 E0.09353
G1 X96.064 Y120.800 E0.80930
M204 S1000
G1 X96.478 Y120.987 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.800 Y119.124 E-0.55709
G1 X97.800 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z2.400 F10800.000
M73 P19 R17
G1 X99.359 Y116.961
G1 Z2.000
G1 E0.80000 F2100.000
;TYPE:Top solid infill
;WIDTH:0.477866
G1 F2400.000
G1 X103.810 Y121.413 E0.32465
G1 X103.225 Y121.413 E0.03016
G1 X98.587 Y116.775 E0.33826
M73 Q19 S17
G1 X98.587 Y117.360 E0.03016
G1 X102.640 Y121.413 E0.29561
G1 X102.056 Y121.413 E0.03016
G1 X98.587 Y117.944 E0.25296
G1 X98.587 Y118.529 E0.03016
G1 X101.471 Y121.413 E0.21031
G1 X100.886 Y121.413 E0.03016
G1 X98.587 Y119.114 E0.16766
G1 X98.587 Y119.450 E0.01736
G1 X98.463 Y119.574 E0.00905
G1 X100.301 Y121.413 E0.13407
G1 X99.717 Y121.413 E0.03016
G1 X98.171 Y119.867 E0.11274
G1 X97.878 Y120.159 E0.02132
G1 X99.132 Y121.413 E0.09142
G1 X98.547 Y121.413 E0.03016
G1 X97.586 Y120.452 E0.07009
G1 X97.294 Y120.744 E0.02132
G1 X98.136 Y121.586 E0.06143
;WIPE_START
G1 F8640.000
G1 X97.294 Y120.744 E-0.27502
G1 X97.586 Y120.452 E-0.09547
G1 X98.547 Y121.413 E-0.31383
G1 X98.875 Y121.413 E-0.07568
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z2.400 F10800.000
G1 X104.910 Y88.798
G1 Z2.000
G1 E0.80000 F2100.000
;WIDTH:0.457302
G1 F2400.000
G1 X104.700 Y88.587 E0.01458
G1 X104.144 Y88.587 E0.02723
G1 X104.509 Y88.953 E0.02533
G1 X104.232 Y89.231 E0.01926
G1 X103.588 Y88.587 E0.04459
G1 X103.033 Y88.587 E0.02723
G1 X103.954 Y89.508 E0.06384
G1 X103.676 Y89.786 E0.01926
G1 X102.477 Y88.587 E0.08310
G1 X101.921 Y88.587 E0.02723
G1 X103.398 Y90.064 E0.10236
G1 X103.120 Y90.342 E0.01926
G1 X101.366 Y88.587 E0.12161
G1 X100.950 Y88.587 E0.02035
G1 X100.880 Y88.658 E0.00487
G1 X102.842 Y90.620 E0.13600
G1 X102.565 Y90.898 E0.01926
G1 X100.602 Y88.935 E0.13600
G1 X100.324 Y89.213 E0.01926
G1 X102.287 Y91.176 E0.13600
G1 X102.009 Y91.453 E0.01926
G1 X100.047 Y89.491 E0.13600
G1 X99.769 Y89.769 E0.01926
G1 X101.731 Y91.731 E0.13600
G1 X101.453 Y92.009 E0.01926
G1 X99.491 Y90.047 E0.13600
G1 X99.213 Y90.325 E0.01926
G1 X101.175 Y92.287 E0.13600
G1 X100.898 Y92.565 E0.01926
G1 X98.935 Y90.602 E0.13600
G1 X98.657 Y90.880 E0.01926
G1 X100.620 Y92.843 E0.13600
G1 X100.342 Y93.120 E0.01926
G1 X98.587 Y91.366 E0.12161
G1 X98.587 Y91.921 E0.02723
G1 X100.064 Y93.398 E0.10235
G1 X99.786 Y93.676 E0.01926
G1 X98.587 Y92.477 E0.08309
G1 X98.587 Y93.033 E0.02723
G1 X99.508 Y93.954 E0.06384
G1 X99.231 Y94.232 E0.01926
G1 X98.587 Y93.588 E0.04458
G1 X98.587 Y94.144 E0.02723
G1 X98.953 Y94.510 E0.02533
G1 X98.675 Y94.787 E0.01926
G1 X98.414 Y94.526 E0.01810
;WIPE_START
G1 F8640.000
G1 X98.675 Y94.787 E-0.08527
G1 X98.953 Y94.510 E-0.09073
G1 X98.587 Y94.144 E-0.11933
G1 X98.587 Y93.588 E-0.12831
G1 X99.231 Y94.232 E-0.21005
G1 X99.508 Y93.954 E-0.09073
G1 X99.399 Y93.845 E-0.03559
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z2.400 F10800.000
G1 X148.865 Y88.414
G1 Z2.000
G1 E0.80000 F2100.000
;WIDTH:0.465915
G1 F2400.000
G1 X151.413 Y90.962 E0.18046
G1 X151.413 Y91.530 E0.02844
G1 X148.470 Y88.587 E0.20839
G1 X147.903 Y88.587 E0.02844
G1 X151.413 Y92.097 E0.24861
G1 X151.413 Y92.665 E0.02844
G1 X147.335 Y88.587 E0.28882
G1 X146.767 Y88.587 E0.02844
G1 X151.413 Y93.233 E0.32904
G1 X151.413 Y93.801 E0.02844
G1 X146.199 Y88.587 E0.36926
G1 X145.631 Y88.587 E0.02844
G1 X151.586 Y94.542 E0.42177
;WIPE_START
G1 F8640.000
G1 X149.259 Y92.215 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z2.400 F10800.000
G1 X151.586 Y115.977
G1 Z2.000
G1 E0.80000 F2100.000
;WIDTH:0.461035
M73 P19 R16
G1 F2400.000
G1 X151.321 Y115.712 E0.01855
G1 X151.041 Y115.992 E0.01962
G1 X151.413 Y116.364 E0.02603
G1 X151.413 Y116.925 E0.02775
G1 X150.760 Y116.273 E0.04566
G1 X150.480 Y116.553 E0.01962
G1 X151.413 Y117.486 E0.06528
G1 X151.413 Y118.047 E0.02775
G1 X150.199 Y116.834 E0.08490
G1 X149.919 Y117.114 E0.01962
G1 X151.413 Y118.608 E0.10453
G1 X151.413 Y119.169 E0.02775
G1 X149.638 Y117.394 E0.12415
G1 X149.358 Y117.675 E0.01962
G1 X152.576 Y120.894 E0.22519
G1 X152.296 Y121.174 E0.01962
G1 X149.077 Y117.955 E0.22519
G1 X148.797 Y118.236 E0.01962
G1 X151.974 Y121.413 E0.22226
G1 X151.413 Y121.413 E0.02775
G1 X148.516 Y118.516 E0.20264
G1 X148.236 Y118.797 E0.01962
G1 X150.852 Y121.413 E0.18302
G1 X150.291 Y121.413 E0.02775
G1 X147.955 Y119.077 E0.16339
G1 X147.675 Y119.358 E0.01962
G1 X149.730 Y121.413 E0.14377
G1 X149.169 Y121.413 E0.02775
G1 X147.394 Y119.638 E0.12415
G1 X147.114 Y119.919 E0.01962
G1 X148.608 Y121.413 E0.10452
G1 X148.047 Y121.413 E0.02775
G1 X146.833 Y120.199 E0.08490
G1 X146.553 Y120.480 E0.01962
G1 X147.486 Y121.413 E0.06528
G1 X146.925 Y121.413 E0.02775
G1 X146.273 Y120.760 E0.04565
G1 X145.992 Y121.041 E0.01962
G1 X146.364 Y121.413 E0.02603
G1 X145.803 Y121.413 E0.02775
G1 X145.589 Y121.198 E0.01499
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:2.3
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;2.3


;WIPE_START
G1 F8640.000
G1 X145.803 Y121.413 E-0.06996
G1 X146.364 Y121.413 E-0.12953
G1 X145.992 Y121.041 E-0.12148
G1 X146.273 Y120.760 E-0.09159
G1 X146.925 Y121.413 E-0.21307
G1 X147.486 Y121.413 E-0.12953
G1 X147.471 Y121.398 E-0.00485
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z2.400 F10800.000
;AFTER_LAYER_CHANGE
;2.3
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X151.286 Y119.325
G1 Z2.300
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
M73 P20 R16
M73 Q20 S17
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.265 E1.55342
M204 S1000
G1 X150.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.064 E1.88315
M204 S1000
G1 X151.006 Y119.467 F10800.000
G1 X151.714 Y119.325
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X153.675 Y121.286 E0.15062
G1 X165.864 Y121.286 E0.66231
G1 X165.864 Y121.714 E0.02330
G1 X84.136 Y121.714 E4.44056
M73 Q20 S16
G1 X84.136 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.66231
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.265 E1.54523
M204 S1000
G1 X152.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X153.876 Y120.800 E0.15832
G1 X166.350 Y120.800 E0.83335
G1 X166.350 Y122.200 E0.09353
G1 X83.650 Y122.200 E5.52481
M73 P21 R16
M73 Q21 S16
G1 X83.650 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.83335
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.064 E1.89995
M204 S1000
G1 X152.010 Y119.477 F10800.000
;WIPE_START
G1 F8640.000
G1 X153.876 Y120.800 E-0.55709
G1 X154.755 Y120.800 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z2.700 F10800.000
G1 X152.526 Y120.599
G1 Z2.300
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X151.736 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X152.526 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z2.700 F10800.000
G1 X98.264 Y121.388
G1 Z2.300
G1 E0.80000 F2100.000
G1 F5100.000
G1 X97.474 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:2.6
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;2.6


;WIPE_START
G1 F8640.000
G1 X98.264 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z2.700 F10800.000
;AFTER_LAYER_CHANGE
;2.6
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X100.675 Y121.286
G1 Z2.600
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F3000.000
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.735 Y121.286 E2.64008
M204 S1000
G1 X100.876 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
M73 P22 R16
M73 Q22 S16
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
G1 X149.124 Y120.800 E0.15832
G1 X100.936 Y120.800 E3.21925
M204 S1000
G1 X100.532 Y121.004 F10800.000
;WIPE_START
G1 F8640.000
G1 X99.200 Y119.124 E-0.55709
G1 X99.200 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z3.000 F10800.000
G1 X96.325 Y121.286
G1 Z2.600
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X166.164 Y121.286 E0.67861
G1 X166.164 Y121.714 E0.02330
G1 X83.836 Y121.714 E4.47316
G1 X83.836 Y121.286 E0.02330
G1 X96.265 Y121.286 E0.67535
M204 S1000
G1 X96.124 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
M73 P23 R16
G1 X153.876 Y120.800 E0.15832
G1 X166.650 Y120.800 E0.85339
G1 X166.650 Y122.200 E0.09353
G1 X83.350 Y122.200 E5.56489
M73 Q23 S16
G1 X83.350 Y120.800 E0.09353
G1 X96.064 Y120.800 E0.84938
M204 S1000
G1 X96.478 Y120.987 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.800 Y119.124 E-0.55709
G1 X97.800 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z3.000 F10800.000
G1 X97.474 Y120.599
G1 Z2.600
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z3.000 F10800.000
G1 X151.736 Y121.388
G1 Z2.600
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:2.9
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;2.9


;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z3.000 F10800.000
;AFTER_LAYER_CHANGE
;2.9
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X151.286 Y119.325
G1 Z2.900
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F3000.000
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.265 E1.55342
M204 S1000
G1 X150.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
M73 P24 R16
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.064 E1.88315
M204 S1000
M73 Q24 S16
G1 X151.006 Y119.467 F10800.000
G1 X151.714 Y119.325
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X153.675 Y121.286 E0.15062
G1 X166.464 Y121.286 E0.69491
G1 X166.464 Y121.714 E0.02330
G1 X83.536 Y121.714 E4.50576
G1 X83.536 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.69491
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.265 E1.54523
M204 S1000
M73 P24 R15
G1 X152.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X153.876 Y120.800 E0.15832
G1 X166.950 Y120.800 E0.87343
G1 X166.950 Y122.200 E0.09353
G1 X83.050 Y122.200 E5.60497
G1 X83.050 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.87343
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.064 E1.89995
M204 S1000
M73 P25 R15
M73 Q25 S16
G1 X152.010 Y119.477 F10800.000
;WIPE_START
G1 F8640.000
G1 X153.876 Y120.800 E-0.55709
G1 X154.755 Y120.800 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z3.300 F10800.000
G1 X152.526 Y120.599
G1 Z2.900
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X151.736 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X152.526 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z3.300 F10800.000
G1 X98.264 Y121.388
G1 Z2.900
G1 E0.80000 F2100.000
G1 F5100.000
G1 X97.474 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:3.2
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;3.2


;WIPE_START
G1 F8640.000
G1 X98.264 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z3.300 F10800.000
;AFTER_LAYER_CHANGE
;3.2
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X100.675 Y121.286
G1 Z3.200
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F3000.000
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
M73 Q25 S15
G1 X149.325 Y121.286 E0.15062
G1 X100.735 Y121.286 E2.64008
M204 S1000
G1 X100.876 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
G1 X149.124 Y120.800 E0.15832
G1 X100.936 Y120.800 E3.21925
M204 S1000
G1 X100.532 Y121.004 F10800.000
;WIPE_START
G1 F8640.000
G1 X99.200 Y119.124 E-0.55709
G1 X99.200 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z3.600 F10800.000
G1 X96.325 Y121.286
G1 Z3.200
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
M73 P26 R15
M73 Q26 S15
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X166.714 Y121.286 E0.70849
G1 X166.714 Y121.714 E0.02330
G1 X83.286 Y121.714 E4.53292
G1 X83.286 Y121.286 E0.02330
G1 X96.265 Y121.286 E0.70523
M204 S1000
G1 X96.124 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X167.200 Y120.800 E0.89013
G1 X167.200 Y122.200 E0.09353
G1 X82.800 Y122.200 E5.63838
G1 X82.800 Y120.800 E0.09353
G1 X96.064 Y120.800 E0.88612
M204 S1000
G1 X96.477 Y120.988 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.800 Y119.124 E-0.55709
G1 X97.800 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z3.600 F10800.000
G1 X97.474 Y120.599
G1 Z3.200
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z3.600 F10800.000
G1 X151.736 Y121.388
G1 Z3.200
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:3.5
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;3.5


;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
M73 P27 R15
G1 Z3.600 F10800.000
;AFTER_LAYER_CHANGE
;3.5
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X151.286 Y119.325
G1 Z3.500
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F3000.000
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
M73 Q27 S15
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.265 E1.55342
M204 S1000
G1 X150.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.064 E1.88315
M204 S1000
G1 X151.006 Y119.467 F10800.000
G1 X151.714 Y119.325
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X153.675 Y121.286 E0.15062
G1 X166.714 Y121.286 E0.70849
G1 X166.714 Y121.714 E0.02330
G1 X83.286 Y121.714 E4.53292
G1 X83.286 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.70849
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
M73 P28 R15
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.265 E1.54523
M204 S1000
M73 Q28 S15
G1 X152.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X153.876 Y120.800 E0.15832
G1 X167.200 Y120.800 E0.89013
G1 X167.200 Y122.200 E0.09353
G1 X82.800 Y122.200 E5.63838
G1 X82.800 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.89013
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.064 E1.89995
M204 S1000
G1 X152.010 Y119.477 F10800.000
;WIPE_START
G1 F8640.000
G1 X153.876 Y120.800 E-0.55709
G1 X154.755 Y120.800 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z3.900 F10800.000
G1 X152.526 Y120.599
G1 Z3.500
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X151.736 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X152.526 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z3.900 F10800.000
G1 X98.264 Y121.388
G1 Z3.500
G1 E0.80000 F2100.000
G1 F5100.000
G1 X97.474 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:3.8
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;3.8


;WIPE_START
G1 F8640.000
G1 X98.264 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z3.900 F10800.000
;AFTER_LAYER_CHANGE
;3.8
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X100.675 Y121.286
G1 Z3.800
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F3000.000
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
M73 P29 R15
G1 X149.325 Y121.286 E0.15062
G1 X100.735 Y121.286 E2.64008
M204 S1000
M73 Q29 S15
G1 X100.876 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
M73 P29 R14
G1 X149.124 Y120.800 E0.15832
G1 X100.936 Y120.800 E3.21925
M204 S1000
G1 X100.532 Y121.004 F10800.000
;WIPE_START
G1 F8640.000
G1 X99.200 Y119.124 E-0.55709
G1 X99.200 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z4.200 F10800.000
G1 X96.325 Y121.286
G1 Z3.800
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X166.714 Y121.286 E0.70849
G1 X166.714 Y121.714 E0.02330
G1 X83.286 Y121.714 E4.53292
G1 X83.286 Y121.286 E0.02330
G1 X96.265 Y121.286 E0.70523
M204 S1000
G1 X96.124 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
M73 P30 R14
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
M73 Q30 S15
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
M73 Q30 S14
G1 X153.876 Y120.800 E0.15832
G1 X167.200 Y120.800 E0.89013
G1 X167.200 Y122.200 E0.09353
G1 X82.800 Y122.200 E5.63838
G1 X82.800 Y120.800 E0.09353
G1 X96.064 Y120.800 E0.88612
M204 S1000
G1 X96.477 Y120.988 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.800 Y119.124 E-0.55709
G1 X97.800 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z4.200 F10800.000
G1 X97.474 Y120.599
G1 Z3.800
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z4.200 F10800.000
G1 X151.736 Y121.388
G1 Z3.800
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:4.1
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;4.1


;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z4.200 F10800.000
;AFTER_LAYER_CHANGE
;4.1
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X151.286 Y119.325
G1 Z4.100
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F3000.000
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.265 E1.55342
M204 S1000
G1 X150.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
M73 P31 R14
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
M73 Q31 S14
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.064 E1.88315
M204 S1000
G1 X151.006 Y119.467 F10800.000
G1 X151.714 Y119.325
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X153.675 Y121.286 E0.15062
G1 X166.714 Y121.286 E0.70849
G1 X166.714 Y121.714 E0.02330
G1 X83.286 Y121.714 E4.53292
G1 X83.286 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.70849
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.265 E1.54523
M204 S1000
G1 X152.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X153.876 Y120.800 E0.15832
G1 X167.200 Y120.800 E0.89013
G1 X167.200 Y122.200 E0.09353
G1 X82.800 Y122.200 E5.63838
G1 X82.800 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.89013
M73 P32 R14
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
M73 Q32 S14
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.064 E1.89995
M204 S1000
G1 X152.010 Y119.477 F10800.000
;WIPE_START
G1 F8640.000
G1 X153.876 Y120.800 E-0.55709
G1 X154.755 Y120.800 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z4.500 F10800.000
G1 X152.526 Y120.599
G1 Z4.100
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X151.736 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X152.526 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z4.500 F10800.000
G1 X98.264 Y121.388
G1 Z4.100
G1 E0.80000 F2100.000
G1 F5100.000
G1 X97.474 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:4.4
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;4.4


;WIPE_START
G1 F8640.000
G1 X98.264 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z4.500 F10800.000
;AFTER_LAYER_CHANGE
;4.4
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X100.675 Y121.286
G1 Z4.400
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F3000.000
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.735 Y121.286 E2.64008
M204 S1000
G1 X100.876 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
G1 X149.124 Y120.800 E0.15832
M73 P33 R14
G1 X100.936 Y120.800 E3.21925
M204 S1000
M73 Q33 S14
G1 X100.532 Y121.004 F10800.000
;WIPE_START
G1 F8640.000
G1 X99.200 Y119.124 E-0.55709
G1 X99.200 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z4.800 F10800.000
G1 X96.325 Y121.286
G1 Z4.400
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X166.714 Y121.286 E0.70849
G1 X166.714 Y121.714 E0.02330
G1 X83.286 Y121.714 E4.53292
G1 X83.286 Y121.286 E0.02330
G1 X96.265 Y121.286 E0.70523
M204 S1000
G1 X96.124 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X167.200 Y120.800 E0.89013
G1 X167.200 Y122.200 E0.09353
G1 X82.800 Y122.200 E5.63838
M73 P34 R14
G1 X82.800 Y120.800 E0.09353
G1 X96.064 Y120.800 E0.88612
M204 S1000
M73 Q34 S14
G1 X96.477 Y120.988 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.800 Y119.124 E-0.55709
G1 X97.800 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z4.800 F10800.000
G1 X97.474 Y120.599
G1 Z4.400
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z4.800 F10800.000
G1 X151.736 Y121.388
G1 Z4.400
G1 E0.80000 F2100.000
M73 P34 R13
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:4.7
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;4.7


;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z4.800 F10800.000
;AFTER_LAYER_CHANGE
;4.7
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X151.286 Y119.325
G1 Z4.700
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F3000.000
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.265 E1.55342
M204 S1000
G1 X150.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.064 E1.88315
M204 S1000
G1 X151.006 Y119.467 F10800.000
G1 X151.714 Y119.325
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X153.675 Y121.286 E0.15062
G1 X166.714 Y121.286 E0.70849
G1 X166.714 Y121.714 E0.02330
G1 X83.286 Y121.714 E4.53292
M73 P35 R13
M73 Q35 S13
G1 X83.286 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.70849
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.265 E1.54523
M204 S1000
G1 X152.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X153.876 Y120.800 E0.15832
G1 X167.200 Y120.800 E0.89013
G1 X167.200 Y122.200 E0.09353
G1 X82.800 Y122.200 E5.63838
G1 X82.800 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.89013
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.064 E1.89995
M204 S1000
G1 X152.010 Y119.477 F10800.000
;WIPE_START
G1 F8640.000
G1 X153.876 Y120.800 E-0.55709
G1 X154.755 Y120.800 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z5.100 F10800.000
G1 X152.526 Y120.599
G1 Z4.700
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X151.736 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X152.526 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z5.100 F10800.000
G1 X98.264 Y121.388
M73 P36 R13
G1 Z4.700
G1 E0.80000 F2100.000
G1 F5100.000
G1 X97.474 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:5
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;5


;WIPE_START
G1 F8640.000
G1 X98.264 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z5.100 F10800.000
;AFTER_LAYER_CHANGE
;5
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X100.675 Y121.286
G1 Z5.000
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F3000.000
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
M73 Q36 S13
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.735 Y121.286 E2.64008
M204 S1000
G1 X100.876 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
G1 X149.124 Y120.800 E0.15832
G1 X100.936 Y120.800 E3.21925
M204 S1000
G1 X100.532 Y121.004 F10800.000
;WIPE_START
G1 F8640.000
G1 X99.200 Y119.124 E-0.55709
G1 X99.200 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z5.400 F10800.000
G1 X96.325 Y121.286
G1 Z5.000
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X166.714 Y121.286 E0.70849
M73 P37 R13
G1 X166.714 Y121.714 E0.02330
G1 X83.286 Y121.714 E4.53292
M73 Q37 S13
G1 X83.286 Y121.286 E0.02330
G1 X96.265 Y121.286 E0.70523
M204 S1000
G1 X96.124 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X167.200 Y120.800 E0.89013
G1 X167.200 Y122.200 E0.09353
G1 X82.800 Y122.200 E5.63838
G1 X82.800 Y120.800 E0.09353
G1 X96.064 Y120.800 E0.88612
M204 S1000
G1 X96.477 Y120.988 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.800 Y119.124 E-0.55709
G1 X97.800 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z5.400 F10800.000
G1 X97.474 Y120.599
G1 Z5.000
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z5.400 F10800.000
G1 X151.736 Y121.388
G1 Z5.000
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:5.3
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;5.3


;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z5.400 F10800.000
;AFTER_LAYER_CHANGE
;5.3
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X151.286 Y119.325
G1 Z5.300
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F3000.000
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
M73 P38 R13
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
M73 Q38 S13
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.265 E1.55342
M204 S1000
G1 X150.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.064 E1.88315
M204 S1000
G1 X151.006 Y119.467 F10800.000
G1 X151.714 Y119.325
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X153.675 Y121.286 E0.15062
G1 X166.714 Y121.286 E0.70849
G1 X166.714 Y121.714 E0.02330
G1 X83.286 Y121.714 E4.53292
G1 X83.286 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.70849
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.265 E1.54523
M204 S1000
G1 X152.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X153.876 Y120.800 E0.15832
G1 X167.200 Y120.800 E0.89013
M73 P39 R13
G1 X167.200 Y122.200 E0.09353
G1 X82.800 Y122.200 E5.63838
M73 P39 R12
M73 Q39 S13
G1 X82.800 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.89013
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.064 E1.89995
M204 S1000
G1 X152.010 Y119.477 F10800.000
;WIPE_START
G1 F8640.000
G1 X153.876 Y120.800 E-0.55709
G1 X154.755 Y120.800 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z5.700 F10800.000
G1 X152.526 Y120.599
G1 Z5.300
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X151.736 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X152.526 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z5.700 F10800.000
G1 X98.264 Y121.388
G1 Z5.300
G1 E0.80000 F2100.000
G1 F5100.000
G1 X97.474 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:5.6
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;5.6


;WIPE_START
G1 F8640.000
G1 X98.264 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z5.700 F10800.000
;AFTER_LAYER_CHANGE
;5.6
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X88.288 Y121.388
G1 Z5.600
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F1800.000
G1 X88.288 Y121.714 E0.01775
G1 X83.286 Y121.714 E0.27180
G1 X83.286 Y121.286 E0.02330
G1 X88.288 Y121.286 E0.27180
G1 X88.288 Y121.328 E0.00228
M204 S1000
G1 X88.774 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X88.774 Y122.200 E0.09353
G1 X82.800 Y122.200 E0.39907
G1 X82.800 Y120.800 E0.09353
G1 X88.714 Y120.800 E0.39507
M204 S1000
G1 X88.601 Y121.161 F10800.000
;WIPE_START
G1 F8640.000
G1 X88.774 Y122.200 E-0.32356
G1 X86.884 Y122.200 E-0.43644
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z6.000 F10800.000
G1 X98.714 Y119.325
G1 Z5.600
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
M73 Q39 S12
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
M73 P40 R12
G1 X100.675 Y121.286 E2.64334
G1 X98.757 Y119.368 E0.14736
M204 S1000
G1 X99.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y90.876 E1.88715
M73 Q40 S12
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
G1 X99.242 Y119.167 E0.15431
M204 S1000
G1 X98.800 Y119.120 F10800.000
G1 X98.286 Y119.167
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y90.825 E1.53986
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X158.288 Y121.286 E0.25066
G1 X158.288 Y121.714 E0.02330
G1 X91.712 Y121.714 E3.61727
G1 X91.712 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.25066
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y119.227 E0.00536
M204 S1000
G1 X97.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
M73 P41 R12
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X158.774 Y120.800 E0.32721
M73 Q41 S12
G1 X158.774 Y122.200 E0.09353
G1 X91.226 Y122.200 E4.51253
G1 X91.226 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.32721
G1 X97.758 Y119.167 E0.15431
M204 S1000
G1 X98.199 Y119.091 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.762 Y115.875 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z6.000 F10800.000
G1 X97.474 Y120.599
G1 Z5.600
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z6.000 F10800.000
G1 X151.736 Y121.388
G1 Z5.600
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z6.000 F10800.000
G1 X161.712 Y121.286
G1 Z5.600
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F1800.000
G1 X166.714 Y121.286 E0.27180
G1 X166.714 Y121.714 E0.02330
G1 X161.712 Y121.714 E0.27180
G1 X161.712 Y121.346 E0.02004
M204 S1000
G1 X161.226 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X167.200 Y120.800 E0.39907
G1 X167.200 Y122.200 E0.09353
G1 X161.226 Y122.200 E0.39907
G1 X161.226 Y120.860 E0.08952
M204 S1000
G1 X161.625 Y120.831 F10800.000
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:5.9
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;5.9


;WIPE_START
G1 F8640.000
G1 X164.518 Y120.827 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z6.000 F10800.000
;AFTER_LAYER_CHANGE
;5.9
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X87.801 Y121.286
G1 Z5.900
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F1800.000
G1 X87.801 Y121.714 E0.02330
G1 X83.286 Y121.714 E0.24533
G1 X83.286 Y121.286 E0.02330
G1 X87.741 Y121.286 E0.24207
M204 S1000
G1 X88.287 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X88.287 Y122.200 E0.09353
G1 X82.800 Y122.200 E0.36654
G1 X82.800 Y120.800 E0.09353
G1 X88.227 Y120.800 E0.36253
M204 S1000
G1 X88.116 Y121.162 F10800.000
;WIPE_START
G1 F8640.000
G1 X88.287 Y122.200 E-0.32356
G1 X86.396 Y122.200 E-0.43644
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z6.300 F10800.000
G1 X98.714 Y119.325
G1 Z5.900
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
M73 P42 R12
G1 X98.757 Y119.368 E0.14736
M204 S1000
G1 X99.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y90.876 E1.88715
M73 Q42 S12
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
G1 X99.242 Y119.167 E0.15431
M204 S1000
G1 X98.800 Y119.120 F10800.000
G1 X98.286 Y119.167
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y90.825 E1.53986
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X157.801 Y121.286 E0.22420
G1 X157.801 Y121.714 E0.02330
G1 X92.199 Y121.714 E3.56434
G1 X92.199 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.22420
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y119.227 E0.00536
M204 S1000
G1 X97.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
M73 P43 R12
G1 X153.876 Y120.800 E0.15832
G1 X158.287 Y120.800 E0.29467
G1 X158.287 Y122.200 E0.09353
G1 X91.713 Y122.200 E4.44745
M73 Q43 S12
G1 X91.713 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.29467
G1 X97.758 Y119.167 E0.15431
M204 S1000
G1 X98.198 Y119.088 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.762 Y115.875 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z6.300 F10800.000
G1 X97.474 Y120.599
G1 Z5.900
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z6.300 F10800.000
G1 X151.736 Y121.388
G1 Z5.900
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z6.300 F10800.000
G1 X162.199 Y121.286
G1 Z5.900
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F1800.000
G1 X166.714 Y121.286 E0.24533
G1 X166.714 Y121.714 E0.02330
G1 X162.199 Y121.714 E0.24533
G1 X162.199 Y121.346 E0.02004
M204 S1000
G1 X161.713 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X167.200 Y120.800 E0.36654
G1 X167.200 Y122.200 E0.09353
G1 X161.713 Y122.200 E0.36654
G1 X161.713 Y120.860 E0.08952
M204 S1000
G1 X162.112 Y120.833 F10800.000
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:6.2
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;6.2


;WIPE_START
G1 F8640.000
G1 X165.005 Y120.824 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z6.300 F10800.000
;AFTER_LAYER_CHANGE
;6.2
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X87.494 Y121.286
G1 Z6.200
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F1800.000
G1 X87.494 Y121.714 E0.02330
G1 X83.286 Y121.714 E0.22866
G1 X83.286 Y121.286 E0.02330
G1 X87.434 Y121.286 E0.22540
M204 S1000
G1 X87.980 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X87.980 Y122.200 E0.09353
G1 X82.800 Y122.200 E0.34603
G1 X82.800 Y120.800 E0.09353
G1 X87.920 Y120.800 E0.34202
M204 S1000
G1 X87.811 Y121.163 F10800.000
;WIPE_START
G1 F8640.000
G1 X87.980 Y122.200 E-0.32356
G1 X86.090 Y122.200 E-0.43644
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z6.600 F10800.000
G1 X98.714 Y119.325
G1 Z6.200
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
M73 P43 R11
G1 X98.757 Y119.368 E0.14736
M204 S1000
G1 X99.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y90.876 E1.88715
M73 P44 R11
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
M73 Q44 S12
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
G1 X99.242 Y119.167 E0.15431
M204 S1000
G1 X98.800 Y119.120 F10800.000
G1 X98.286 Y119.167
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y90.825 E1.53986
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X157.494 Y121.286 E0.20752
G1 X157.494 Y121.714 E0.02330
G1 X92.506 Y121.714 E3.53099
M73 Q44 S11
G1 X92.506 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.20752
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y119.227 E0.00536
M204 S1000
G1 X97.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
M73 P45 R11
G1 X157.980 Y120.800 E0.27417
G1 X157.980 Y122.200 E0.09353
G1 X92.020 Y122.200 E4.40644
M73 Q45 S11
G1 X92.020 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.27417
G1 X97.758 Y119.167 E0.15431
M204 S1000
G1 X98.198 Y119.087 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.762 Y115.875 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z6.600 F10800.000
G1 X97.474 Y120.599
G1 Z6.200
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z6.600 F10800.000
G1 X151.736 Y121.388
G1 Z6.200
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z6.600 F10800.000
G1 X162.506 Y121.286
G1 Z6.200
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F1800.000
G1 X166.714 Y121.286 E0.22866
G1 X166.714 Y121.714 E0.02330
G1 X162.506 Y121.714 E0.22866
G1 X162.506 Y121.346 E0.02004
M204 S1000
G1 X162.020 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X167.200 Y120.800 E0.34603
G1 X167.200 Y122.200 E0.09353
G1 X162.020 Y122.200 E0.34603
G1 X162.020 Y120.860 E0.08952
M204 S1000
G1 X162.419 Y120.835 F10800.000
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:6.5
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;6.5


;WIPE_START
G1 F8640.000
G1 X165.312 Y120.822 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z6.600 F10800.000
;AFTER_LAYER_CHANGE
;6.5
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X87.281 Y121.286
G1 Z6.500
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F1800.000
G1 X87.281 Y121.714 E0.02330
G1 X83.286 Y121.714 E0.21708
G1 X83.286 Y121.286 E0.02330
G1 X87.221 Y121.286 E0.21382
M204 S1000
G1 X87.767 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X87.767 Y122.200 E0.09353
G1 X82.800 Y122.200 E0.33180
G1 X82.800 Y120.800 E0.09353
G1 X87.707 Y120.800 E0.32779
M204 S1000
G1 X87.599 Y121.163 F10800.000
;WIPE_START
G1 F8640.000
G1 X87.767 Y122.200 E-0.32356
G1 X85.876 Y122.200 E-0.43644
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z6.900 F10800.000
G1 X98.714 Y119.325
G1 Z6.500
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
G1 X98.757 Y119.368 E0.14736
M204 S1000
G1 X99.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
M73 P46 R11
M73 Q46 S11
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
G1 X99.242 Y119.167 E0.15431
M204 S1000
G1 X98.800 Y119.120 F10800.000
G1 X98.286 Y119.167
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y90.825 E1.53986
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X157.281 Y121.286 E0.19595
G1 X157.281 Y121.714 E0.02330
G1 X92.719 Y121.714 E3.50784
G1 X92.719 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.19595
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y119.227 E0.00536
M204 S1000
G1 X97.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X157.767 Y120.800 E0.25993
G1 X157.767 Y122.200 E0.09353
G1 X92.233 Y122.200 E4.37797
M73 P47 R11
M73 Q47 S11
G1 X92.233 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.25993
G1 X97.758 Y119.167 E0.15431
M204 S1000
G1 X98.198 Y119.085 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.762 Y115.875 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z6.900 F10800.000
G1 X97.474 Y120.599
G1 Z6.500
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z6.900 F10800.000
G1 X151.736 Y121.388
G1 Z6.500
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z6.900 F10800.000
G1 X162.719 Y121.286
G1 Z6.500
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F1800.000
G1 X166.714 Y121.286 E0.21708
G1 X166.714 Y121.714 E0.02330
G1 X162.719 Y121.714 E0.21708
G1 X162.719 Y121.346 E0.02004
M204 S1000
G1 X162.233 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X167.200 Y120.800 E0.33180
G1 X167.200 Y122.200 E0.09353
G1 X162.233 Y122.200 E0.33180
G1 X162.233 Y120.860 E0.08952
M204 S1000
G1 X162.632 Y120.837 F10800.000
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:6.8
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;6.8


;WIPE_START
G1 F8640.000
G1 X165.525 Y120.820 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z6.900 F10800.000
;AFTER_LAYER_CHANGE
;6.8
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X87.131 Y121.286
G1 Z6.800
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F1800.000
G1 X87.131 Y121.714 E0.02330
G1 X83.286 Y121.714 E0.20895
G1 X83.286 Y121.286 E0.02330
G1 X87.071 Y121.286 E0.20569
M204 S1000
G1 X87.617 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X87.617 Y122.200 E0.09353
G1 X82.800 Y122.200 E0.32180
G1 X82.800 Y120.800 E0.09353
G1 X87.557 Y120.800 E0.31779
M204 S1000
G1 X87.451 Y121.164 F10800.000
;WIPE_START
G1 F8640.000
G1 X87.617 Y122.200 E-0.32356
G1 X85.727 Y122.200 E-0.43644
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z7.200 F10800.000
G1 X98.714 Y119.325
G1 Z6.800
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
G1 X98.757 Y119.368 E0.14736
M204 S1000
G1 X99.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
M73 P48 R11
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
M73 Q48 S11
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
G1 X99.242 Y119.167 E0.15431
M204 S1000
G1 X98.800 Y119.120 F10800.000
G1 X98.286 Y119.167
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y90.825 E1.53986
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X157.131 Y121.286 E0.18782
G1 X157.131 Y121.714 E0.02330
G1 X92.869 Y121.714 E3.49158
G1 X92.869 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.18782
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y119.227 E0.00536
M204 S1000
G1 X97.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
M73 P48 R10
G1 X153.876 Y120.800 E0.15832
G1 X157.617 Y120.800 E0.24994
G1 X157.617 Y122.200 E0.09353
G1 X92.383 Y122.200 E4.35798
M73 P49 R10
G1 X92.383 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.24994
G1 X97.758 Y119.167 E0.15431
M204 S1000
G1 X98.198 Y119.084 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.762 Y115.875 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z7.200 F10800.000
G1 X97.474 Y120.599
G1 Z6.800
M73 Q49 S11
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z7.200 F10800.000
G1 X151.736 Y121.388
G1 Z6.800
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z7.200 F10800.000
G1 X162.869 Y121.286
G1 Z6.800
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F1800.000
G1 X166.714 Y121.286 E0.20895
G1 X166.714 Y121.714 E0.02330
G1 X162.869 Y121.714 E0.20895
G1 X162.869 Y121.346 E0.02004
M204 S1000
G1 X162.383 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X167.200 Y120.800 E0.32180
G1 X167.200 Y122.200 E0.09353
G1 X162.383 Y122.200 E0.32180
G1 X162.383 Y120.860 E0.08952
M204 S1000
G1 X162.781 Y120.838 F10800.000
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:7.1
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;7.1


;WIPE_START
G1 F8640.000
G1 X165.674 Y120.819 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z7.200 F10800.000
;AFTER_LAYER_CHANGE
;7.1
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X87.033 Y121.286
G1 Z7.100
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F1800.000
G1 X87.033 Y121.714 E0.02330
G1 X83.286 Y121.714 E0.20361
G1 X83.286 Y121.286 E0.02330
G1 X86.973 Y121.286 E0.20035
M204 S1000
G1 X87.519 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X87.519 Y122.200 E0.09353
G1 X82.800 Y122.200 E0.31524
G1 X82.800 Y120.800 E0.09353
G1 X87.459 Y120.800 E0.31123
M204 S1000
G1 X87.353 Y121.164 F10800.000
;WIPE_START
G1 F8640.000
G1 X87.519 Y122.200 E-0.32356
G1 X85.629 Y122.200 E-0.43644
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z7.500 F10800.000
G1 X98.714 Y119.325
G1 Z7.100
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.714 Y90.675 E1.55668
M73 Q49 S10
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
G1 X98.757 Y119.368 E0.14736
M204 S1000
G1 X99.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
M73 P50 R10
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
M73 Q50 S10
G1 X99.242 Y119.167 E0.15431
M204 S1000
G1 X98.800 Y119.120 F10800.000
G1 X98.286 Y119.167
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y90.825 E1.53986
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X157.033 Y121.286 E0.18248
G1 X157.033 Y121.714 E0.02330
G1 X92.967 Y121.714 E3.48090
G1 X92.967 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.18248
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y119.227 E0.00536
M204 S1000
G1 X97.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X157.519 Y120.800 E0.24337
G1 X157.519 Y122.200 E0.09353
G1 X92.481 Y122.200 E4.34486
G1 X92.481 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.24337
G1 X97.758 Y119.167 E0.15431
M204 S1000
G1 X98.198 Y119.084 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.762 Y115.875 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z7.500 F10800.000
G1 X97.474 Y120.599
G1 Z7.100
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
M73 P51 R10
G1 Z7.500 F10800.000
G1 X151.736 Y121.388
M73 Q51 S10
G1 Z7.100
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z7.500 F10800.000
G1 X162.967 Y121.286
G1 Z7.100
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F1800.000
G1 X166.714 Y121.286 E0.20361
G1 X166.714 Y121.714 E0.02330
G1 X162.967 Y121.714 E0.20361
G1 X162.967 Y121.346 E0.02004
M204 S1000
G1 X162.481 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X167.200 Y120.800 E0.31524
G1 X167.200 Y122.200 E0.09353
G1 X162.481 Y122.200 E0.31524
G1 X162.481 Y120.860 E0.08952
M204 S1000
G1 X162.879 Y120.838 F10800.000
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:7.4
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;7.4


;WIPE_START
G1 F8640.000
G1 X165.772 Y120.818 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z7.500 F10800.000
;AFTER_LAYER_CHANGE
;7.4
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X86.979 Y121.286
G1 Z7.400
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F1800.000
G1 X86.979 Y121.714 E0.02330
G1 X83.286 Y121.714 E0.20066
G1 X83.286 Y121.286 E0.02330
G1 X86.919 Y121.286 E0.19740
M204 S1000
G1 X87.464 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X87.464 Y122.200 E0.09353
G1 X82.800 Y122.200 E0.31161
G1 X82.800 Y120.800 E0.09353
G1 X87.404 Y120.800 E0.30760
M204 S1000
G1 X87.299 Y121.164 F10800.000
;WIPE_START
G1 F8640.000
G1 X87.464 Y122.200 E-0.32356
G1 X85.574 Y122.200 E-0.43644
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z7.800 F10800.000
G1 X98.714 Y119.325
G1 Z7.400
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
G1 X98.757 Y119.368 E0.14736
M204 S1000
G1 X99.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
M73 P52 R10
M73 Q52 S10
G1 X99.242 Y119.167 E0.15431
M204 S1000
G1 X98.800 Y119.120 F10800.000
G1 X98.286 Y119.167
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y90.825 E1.53986
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X156.979 Y121.286 E0.17953
G1 X156.979 Y121.714 E0.02330
G1 X93.021 Y121.714 E3.47500
G1 X93.021 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.17953
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y119.227 E0.00536
M204 S1000
G1 X97.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X157.464 Y120.800 E0.23975
G1 X157.464 Y122.200 E0.09353
G1 X92.536 Y122.200 E4.33760
G1 X92.536 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.23975
G1 X97.758 Y119.167 E0.15431
M204 S1000
G1 X98.198 Y119.083 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.762 Y115.875 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z7.800 F10800.000
G1 X97.474 Y120.599
G1 Z7.400
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z7.800 F10800.000
G1 X151.736 Y121.388
G1 Z7.400
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z7.800 F10800.000
G1 X163.021 Y121.286
G1 Z7.400
M73 P53 R10
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F1800.000
G1 X166.714 Y121.286 E0.20066
G1 X166.714 Y121.714 E0.02330
G1 X163.021 Y121.714 E0.20066
M73 Q53 S10
G1 X163.021 Y121.346 E0.02004
M204 S1000
G1 X162.536 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X167.200 Y120.800 E0.31161
G1 X167.200 Y122.200 E0.09353
G1 X162.536 Y122.200 E0.31161
G1 X162.536 Y120.860 E0.08952
M204 S1000
G1 X162.934 Y120.839 F10800.000
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:7.7
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;7.7


;WIPE_START
G1 F8640.000
G1 X165.827 Y120.818 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z7.800 F10800.000
;AFTER_LAYER_CHANGE
;7.7
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X86.965 Y121.286
G1 Z7.700
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F1800.000
G1 X86.965 Y121.714 E0.02330
G1 X83.286 Y121.714 E0.19994
G1 X83.286 Y121.286 E0.02330
G1 X86.905 Y121.286 E0.19668
M204 S1000
G1 X87.451 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X87.451 Y122.200 E0.09353
G1 X82.800 Y122.200 E0.31072
G1 X82.800 Y120.800 E0.09353
G1 X87.391 Y120.800 E0.30671
M204 S1000
G1 X87.286 Y121.164 F10800.000
;WIPE_START
G1 F8640.000
G1 X87.451 Y122.200 E-0.32356
G1 X85.561 Y122.200 E-0.43644
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z8.100 F10800.000
G1 X98.714 Y119.325
G1 Z7.700
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
G1 X98.757 Y119.368 E0.14736
M204 S1000
G1 X99.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
M73 P53 R9
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
G1 X99.242 Y119.167 E0.15431
M204 S1000
G1 X98.800 Y119.120 F10800.000
G1 X98.286 Y119.167
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y90.825 E1.53986
M73 P54 R9
G1 X100.825 Y88.286 E0.19515
M73 Q54 S10
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X156.965 Y121.286 E0.17880
G1 X156.965 Y121.714 E0.02330
G1 X93.035 Y121.714 E3.47355
M73 Q54 S9
G1 X93.035 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.17880
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y119.227 E0.00536
M204 S1000
G1 X97.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X157.451 Y120.800 E0.23885
G1 X157.451 Y122.200 E0.09353
G1 X92.549 Y122.200 E4.33582
G1 X92.549 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.23885
G1 X97.758 Y119.167 E0.15431
M204 S1000
G1 X98.198 Y119.083 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.762 Y115.875 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z8.100 F10800.000
G1 X97.474 Y120.599
G1 Z7.700
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z8.100 F10800.000
G1 X151.736 Y121.388
G1 Z7.700
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z8.100 F10800.000
G1 X163.035 Y121.286
G1 Z7.700
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F1800.000
G1 X166.714 Y121.286 E0.19994
G1 X166.714 Y121.714 E0.02330
G1 X163.035 Y121.714 E0.19994
G1 X163.035 Y121.346 E0.02004
M204 S1000
G1 X162.549 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X167.200 Y120.800 E0.31072
G1 X167.200 Y122.200 E0.09353
G1 X162.549 Y122.200 E0.31072
G1 X162.549 Y120.860 E0.08952
M204 S1000
G1 X162.947 Y120.839 F10800.000
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:8
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;8


;WIPE_START
G1 F8640.000
G1 X165.840 Y120.818 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z8.100 F10800.000
;AFTER_LAYER_CHANGE
;8
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
M73 P55 R9
G1 X86.992 Y121.286
M73 Q55 S9
G1 Z8.000
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F1800.000
G1 X86.992 Y121.714 E0.02330
G1 X83.286 Y121.714 E0.20139
G1 X83.286 Y121.286 E0.02330
G1 X86.932 Y121.286 E0.19813
M204 S1000
G1 X87.478 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X87.478 Y122.200 E0.09353
G1 X82.800 Y122.200 E0.31251
G1 X82.800 Y120.800 E0.09353
G1 X87.418 Y120.800 E0.30850
M204 S1000
G1 X87.312 Y121.164 F10800.000
;WIPE_START
G1 F8640.000
G1 X87.478 Y122.200 E-0.32356
G1 X85.588 Y122.200 E-0.43644
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z8.400 F10800.000
G1 X98.714 Y119.325
G1 Z8.000
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
G1 X98.757 Y119.368 E0.14736
M204 S1000
G1 X99.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
G1 X99.242 Y119.167 E0.15431
M204 S1000
G1 X98.800 Y119.120 F10800.000
G1 X98.286 Y119.167
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y90.825 E1.53986
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
M73 P56 R9
M73 Q56 S9
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X156.992 Y121.286 E0.18026
G1 X156.992 Y121.714 E0.02330
G1 X93.008 Y121.714 E3.47647
G1 X93.008 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.18026
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y119.227 E0.00536
M204 S1000
G1 X97.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X157.478 Y120.800 E0.24064
G1 X157.478 Y122.200 E0.09353
G1 X92.522 Y122.200 E4.33940
G1 X92.522 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.24065
G1 X97.758 Y119.167 E0.15431
M204 S1000
G1 X98.198 Y119.083 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.762 Y115.875 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z8.400 F10800.000
G1 X97.474 Y120.599
G1 Z8.000
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z8.400 F10800.000
G1 X151.736 Y121.388
G1 Z8.000
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z8.400 F10800.000
G1 X163.008 Y121.286
G1 Z8.000
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F1800.000
G1 X166.714 Y121.286 E0.20139
G1 X166.714 Y121.714 E0.02330
G1 X163.008 Y121.714 E0.20139
G1 X163.008 Y121.346 E0.02004
M204 S1000
G1 X162.522 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X167.200 Y120.800 E0.31251
G1 X167.200 Y122.200 E0.09353
G1 X162.522 Y122.200 E0.31251
G1 X162.522 Y120.860 E0.08952
M204 S1000
G1 X162.920 Y120.839 F10800.000
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:8.3
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;8.3


;WIPE_START
G1 F8640.000
G1 X165.813 Y120.818 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z8.400 F10800.000
;AFTER_LAYER_CHANGE
;8.3
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X87.061 Y121.286
G1 Z8.300
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F1800.000
G1 X87.061 Y121.714 E0.02330
G1 X83.286 Y121.714 E0.20511
M73 Q57 S9
G1 X83.286 Y121.286 E0.02330
G1 X87.001 Y121.286 E0.20185
M204 S1000
G1 X87.546 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
M73 P57 R9
G1 F1800.000
G1 X87.546 Y122.200 E0.09353
G1 X82.800 Y122.200 E0.31708
G1 X82.800 Y120.800 E0.09353
G1 X87.486 Y120.800 E0.31307
M204 S1000
G1 X87.380 Y121.164 F10800.000
;WIPE_START
G1 F8640.000
G1 X87.546 Y122.200 E-0.32356
G1 X85.656 Y122.200 E-0.43644
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z8.700 F10800.000
G1 X98.714 Y119.325
G1 Z8.300
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
G1 X98.757 Y119.368 E0.14736
M204 S1000
G1 X99.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
G1 X99.242 Y119.167 E0.15431
M204 S1000
G1 X98.800 Y119.120 F10800.000
G1 X98.286 Y119.167
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y90.825 E1.53986
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X157.061 Y121.286 E0.18398
M73 Q58 S9
G1 X157.061 Y121.714 E0.02330
G1 X92.939 Y121.714 E3.48391
M73 P58 R9
G1 X92.939 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.18398
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y119.227 E0.00536
M204 S1000
G1 X97.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X157.546 Y120.800 E0.24522
G1 X157.546 Y122.200 E0.09353
G1 X92.454 Y122.200 E4.34855
G1 X92.454 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.24522
M73 P58 R8
G1 X97.758 Y119.167 E0.15431
M204 S1000
G1 X98.198 Y119.084 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.762 Y115.875 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z8.700 F10800.000
G1 X97.474 Y120.599
G1 Z8.300
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z8.700 F10800.000
G1 X151.736 Y121.388
G1 Z8.300
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z8.700 F10800.000
G1 X162.939 Y121.286
G1 Z8.300
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F1800.000
G1 X166.714 Y121.286 E0.20511
G1 X166.714 Y121.714 E0.02330
G1 X162.939 Y121.714 E0.20511
G1 X162.939 Y121.346 E0.02004
M204 S1000
G1 X162.454 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X167.200 Y120.800 E0.31708
G1 X167.200 Y122.200 E0.09353
G1 X162.454 Y122.200 E0.31708
G1 X162.454 Y120.860 E0.08952
M204 S1000
G1 X162.852 Y120.838 F10800.000
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:8.6
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;8.6


;WIPE_START
G1 F8640.000
G1 X165.745 Y120.818 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z8.700 F10800.000
;AFTER_LAYER_CHANGE
;8.6
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X87.175 Y121.286
G1 Z8.600
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F1800.000
G1 X87.175 Y121.714 E0.02330
G1 X83.286 Y121.714 E0.21131
G1 X83.286 Y121.286 E0.02330
G1 X87.115 Y121.286 E0.20805
M204 S1000
G1 X87.660 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X87.660 Y122.200 E0.09353
G1 X82.800 Y122.200 E0.32470
G1 X82.800 Y120.800 E0.09353
G1 X87.600 Y120.800 E0.32069
M204 S1000
G1 X87.494 Y121.164 F10800.000
;WIPE_START
G1 F8640.000
G1 X87.660 Y122.200 E-0.32356
M73 Q59 S9
G1 X85.770 Y122.200 E-0.43644
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z9.000 F10800.000
G1 X98.714 Y119.325
G1 Z8.600
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.714 Y90.675 E1.55668
M73 P59 R8
M73 Q59 S8
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
G1 X98.757 Y119.368 E0.14736
M204 S1000
G1 X99.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
G1 X99.242 Y119.167 E0.15431
M204 S1000
G1 X98.800 Y119.120 F10800.000
G1 X98.286 Y119.167
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y90.825 E1.53986
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X157.175 Y121.286 E0.19018
G1 X157.175 Y121.714 E0.02330
G1 X92.825 Y121.714 E3.49630
M73 P60 R8
M73 Q60 S8
G1 X92.825 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.19018
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y119.227 E0.00536
M204 S1000
G1 X97.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X157.660 Y120.800 E0.25284
G1 X157.660 Y122.200 E0.09353
G1 X92.340 Y122.200 E4.36379
G1 X92.340 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.25284
G1 X97.758 Y119.167 E0.15431
M204 S1000
G1 X98.198 Y119.085 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.762 Y115.875 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z9.000 F10800.000
G1 X97.474 Y120.599
G1 Z8.600
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z9.000 F10800.000
G1 X151.736 Y121.388
G1 Z8.600
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z9.000 F10800.000
G1 X162.825 Y121.286
G1 Z8.600
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F1800.000
G1 X166.714 Y121.286 E0.21131
G1 X166.714 Y121.714 E0.02330
G1 X162.825 Y121.714 E0.21131
G1 X162.825 Y121.346 E0.02004
M204 S1000
G1 X162.340 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X167.200 Y120.800 E0.32470
G1 X167.200 Y122.200 E0.09353
G1 X162.340 Y122.200 E0.32470
G1 X162.340 Y120.860 E0.08952
M204 S1000
G1 X162.738 Y120.837 F10800.000
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:8.9
;HEIGHT:0.299999
;BEFORE_LAYER_CHANGE
G92 E0.0
;8.9


;WIPE_START
G1 F8640.000
G1 X165.631 Y120.819 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z9.000 F10800.000
;AFTER_LAYER_CHANGE
;8.9
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X87.344 Y121.286
G1 Z8.900
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F1800.000
G1 X87.344 Y121.714 E0.02330
G1 X83.286 Y121.714 E0.22051
G1 X83.286 Y121.286 E0.02330
G1 X87.284 Y121.286 E0.21725
M204 S1000
G1 X87.830 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X87.830 Y122.200 E0.09353
G1 X82.800 Y122.200 E0.33602
G1 X82.800 Y120.800 E0.09353
G1 X87.770 Y120.800 E0.33201
M204 S1000
G1 X87.662 Y121.163 F10800.000
;WIPE_START
G1 F8640.000
G1 X87.830 Y122.200 E-0.32356
G1 X85.940 Y122.200 E-0.43644
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z9.300 F10800.000
G1 X98.714 Y119.325
G1 Z8.900
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.714 Y90.675 E1.55668
M73 Q61 S8
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
M73 P61 R8
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
G1 X98.757 Y119.368 E0.14736
M204 S1000
G1 X99.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
G1 X99.242 Y119.167 E0.15431
M204 S1000
G1 X98.800 Y119.120 F10800.000
G1 X98.286 Y119.167
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y90.825 E1.53986
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X157.344 Y121.286 E0.19938
G1 X157.344 Y121.714 E0.02330
G1 X92.656 Y121.714 E3.51471
G1 X92.656 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.19938
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y119.227 E0.00536
M204 S1000
G1 X97.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
M73 Q62 S8
G1 F2100.000
G1 X97.800 Y90.624 E1.90395
M73 P62 R8
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X157.830 Y120.800 E0.26415
G1 X157.830 Y122.200 E0.09353
G1 X92.170 Y122.200 E4.38642
G1 X92.170 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.26415
G1 X97.758 Y119.167 E0.15431
M204 S1000
G1 X98.198 Y119.086 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.762 Y115.875 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z9.300 F10800.000
G1 X97.474 Y120.599
G1 Z8.900
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z9.300 F10800.000
G1 X151.736 Y121.388
G1 Z8.900
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z9.300 F10800.000
G1 X162.656 Y121.286
G1 Z8.900
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F1800.000
G1 X166.714 Y121.286 E0.22051
G1 X166.714 Y121.714 E0.02330
G1 X162.656 Y121.714 E0.22051
G1 X162.656 Y121.346 E0.02004
M204 S1000
G1 X162.170 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X167.200 Y120.800 E0.33602
G1 X167.200 Y122.200 E0.09353
G1 X162.170 Y122.200 E0.33602
G1 X162.170 Y120.860 E0.08952
M204 S1000
G1 X162.569 Y120.836 F10800.000
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:9.2
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;9.2


;WIPE_START
G1 F8640.000
G1 X165.461 Y120.821 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z9.300 F10800.000
;AFTER_LAYER_CHANGE
;9.2
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X87.584 Y121.286
G1 Z9.200
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F1800.000
G1 X87.584 Y121.714 E0.02330
G1 X83.286 Y121.714 E0.23355
G1 X83.286 Y121.286 E0.02330
G1 X87.524 Y121.286 E0.23029
M204 S1000
;WIPE_START
G1 F8640.000
G1 X87.584 Y121.714 E-0.09997
G1 X84.726 Y121.714 E-0.66003
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z9.600 F10800.000
G1 X82.800 Y122.200
G1 Z9.200
G1 E0.80000 F2100.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X82.800 Y120.800 E0.09353
G1 X88.070 Y120.800 E0.35205
G1 X88.070 Y122.200 E0.09353
G1 X82.860 Y122.200 E0.34804
M204 S1000
G1 X82.969 Y121.838 F10800.000
;WIPE_START
G1 F8640.000
G1 X82.800 Y120.800 E-0.32356
G1 X84.690 Y120.800 E-0.43644
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z9.600 F10800.000
G1 X98.714 Y119.325
G1 Z9.200
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
M73 Q63 S8
G1 X149.325 Y88.714 E2.64334
M73 P63 R8
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
G1 X98.757 Y119.368 E0.14736
M204 S1000
G1 X99.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
M73 P63 R7
G1 X99.242 Y119.167 E0.15431
M204 S1000
G1 X98.800 Y119.120 F10800.000
G1 X98.286 Y119.167
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y90.825 E1.53986
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X157.584 Y121.286 E0.21242
G1 X157.584 Y121.714 E0.02330
G1 X92.416 Y121.714 E3.54078
M73 Q63 S7
G1 X92.416 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.21242
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y119.227 E0.00536
M204 S1000
G1 X97.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y90.624 E1.90395
M73 Q64 S7
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
M73 P64 R7
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X158.070 Y120.800 E0.28018
G1 X158.070 Y122.200 E0.09353
G1 X91.930 Y122.200 E4.41848
G1 X91.930 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.28018
G1 X97.758 Y119.167 E0.15431
M204 S1000
G1 X98.198 Y119.087 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.762 Y115.875 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z9.600 F10800.000
G1 X97.474 Y120.599
G1 Z9.200
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z9.600 F10800.000
G1 X151.736 Y121.388
G1 Z9.200
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z9.600 F10800.000
G1 X162.416 Y121.286
G1 Z9.200
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F1800.000
G1 X166.714 Y121.286 E0.23355
G1 X166.714 Y121.714 E0.02330
G1 X162.416 Y121.714 E0.23355
G1 X162.416 Y121.346 E0.02004
M204 S1000
;WIPE_START
G1 F8640.000
G1 X165.707 Y121.300 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z9.600 F10800.000
G1 X167.200 Y122.200
G1 Z9.200
G1 E0.80000 F2100.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X161.930 Y122.200 E0.35205
G1 X161.930 Y120.800 E0.09353
G1 X167.200 Y120.800 E0.35205
G1 X167.200 Y122.140 E0.08952
M204 S1000
G1 X166.801 Y122.165 F10800.000
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:9.5
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;9.5


;WIPE_START
G1 F8640.000
G1 X163.909 Y122.177 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z9.600 F10800.000
;AFTER_LAYER_CHANGE
;9.5
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X87.934 Y121.714
G1 Z9.500
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F1800.000
G1 X83.286 Y121.714 E0.25257
G1 X83.286 Y121.286 E0.02330
G1 X87.934 Y121.286 E0.25257
G1 X87.934 Y121.654 E0.02004
M204 S1000
;WIPE_START
G1 F8640.000
G1 X84.643 Y121.697 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z9.900 F10800.000
G1 X82.800 Y122.200
G1 Z9.500
G1 E0.80000 F2100.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X82.800 Y120.800 E0.09353
G1 X88.420 Y120.800 E0.37544
G1 X88.420 Y122.200 E0.09353
G1 X82.860 Y122.200 E0.37143
M204 S1000
G1 X82.971 Y121.838 F10800.000
;WIPE_START
G1 F8640.000
G1 X82.800 Y120.800 E-0.32356
G1 X84.690 Y120.800 E-0.43644
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z9.900 F10800.000
G1 X98.714 Y119.325
G1 Z9.500
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
M73 Q65 S7
G1 X149.325 Y88.714 E2.64334
M73 P65 R7
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
G1 X98.757 Y119.368 E0.14736
M204 S1000
G1 X99.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
G1 X99.242 Y119.167 E0.15431
M204 S1000
G1 X98.800 Y119.120 F10800.000
G1 X98.286 Y119.167
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y90.825 E1.53986
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X157.934 Y121.286 E0.23144
G1 X157.934 Y121.714 E0.02330
G1 X92.066 Y121.714 E3.57882
G1 X92.066 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.23144
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y119.227 E0.00536
M204 S1000
G1 X97.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y90.624 E1.90395
M73 Q66 S7
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
M73 P66 R7
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X158.420 Y120.800 E0.30357
G1 X158.420 Y122.200 E0.09353
G1 X91.580 Y122.200 E4.46525
G1 X91.580 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.30357
G1 X97.758 Y119.167 E0.15431
M204 S1000
G1 X98.198 Y119.089 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.762 Y115.875 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z9.900 F10800.000
G1 X97.474 Y120.599
G1 Z9.500
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z9.900 F10800.000
G1 X151.736 Y121.388
G1 Z9.500
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z9.900 F10800.000
G1 X162.066 Y121.286
G1 Z9.500
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F1800.000
G1 X166.714 Y121.286 E0.25257
G1 X166.714 Y121.714 E0.02330
G1 X162.066 Y121.714 E0.25257
G1 X162.066 Y121.346 E0.02004
M204 S1000
;WIPE_START
G1 F8640.000
G1 X165.357 Y121.303 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z9.900 F10800.000
G1 X167.200 Y122.200
G1 Z9.500
G1 E0.80000 F2100.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X161.580 Y122.200 E0.37544
G1 X161.580 Y120.800 E0.09353
G1 X167.200 Y120.800 E0.37544
G1 X167.200 Y122.140 E0.08952
M204 S1000
G1 X166.801 Y122.167 F10800.000
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:9.8
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;9.8


;WIPE_START
G1 F8640.000
G1 X163.909 Y122.175 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z9.900 F10800.000
;AFTER_LAYER_CHANGE
;9.8
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X88.552 Y121.714
G1 Z9.800
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F1800.000
G1 X83.286 Y121.714 E0.28614
G1 X83.286 Y121.286 E0.02330
G1 X88.552 Y121.286 E0.28614
G1 X88.552 Y121.654 E0.02004
M204 S1000
;WIPE_START
G1 F8640.000
G1 X85.261 Y121.692 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z10.200 F10800.000
G1 X82.800 Y122.200
G1 Z9.800
G1 E0.80000 F2100.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X82.800 Y120.800 E0.09353
G1 X89.038 Y120.800 E0.41671
G1 X89.038 Y122.200 E0.09353
G1 X82.860 Y122.200 E0.41270
M204 S1000
G1 X82.974 Y121.840 F10800.000
;WIPE_START
G1 F8640.000
G1 X82.800 Y120.800 E-0.32356
G1 X84.690 Y120.800 E-0.43644
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z10.200 F10800.000
G1 X98.714 Y119.325
G1 Z9.800
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.714 Y90.675 E1.55668
M73 Q67 S7
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
M73 P67 R7
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
G1 X98.757 Y119.368 E0.14736
M204 S1000
G1 X99.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
G1 X99.242 Y119.167 E0.15431
M204 S1000
G1 X98.800 Y119.120 F10800.000
G1 X98.286 Y119.167
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y90.825 E1.53986
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X158.552 Y121.286 E0.26500
G1 X158.552 Y121.714 E0.02330
G1 X91.448 Y121.714 E3.64595
G1 X91.448 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.26500
G1 X98.286 Y119.325 E0.15062
M73 Q68 S7
G1 X98.286 Y119.227 E0.00536
M204 S1000
G1 X97.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
M73 P68 R7
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X159.038 Y120.800 E0.34484
G1 X159.038 Y122.200 E0.09353
G1 X90.962 Y122.200 E4.54779
M73 P68 R6
G1 X90.962 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.34484
G1 X97.758 Y119.167 E0.15431
M204 S1000
G1 X98.199 Y119.092 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.762 Y115.875 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z10.200 F10800.000
G1 X97.474 Y120.599
G1 Z9.800
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z10.200 F10800.000
G1 X151.736 Y121.388
G1 Z9.800
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z10.200 F10800.000
G1 X161.448 Y121.286
G1 Z9.800
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F1800.000
G1 X166.714 Y121.286 E0.28614
G1 X166.714 Y121.714 E0.02330
G1 X161.448 Y121.714 E0.28614
G1 X161.448 Y121.346 E0.02004
M204 S1000
;WIPE_START
G1 F8640.000
G1 X164.739 Y121.308 E-0.76000
;WIPE_END
M73 Q68 S6
G1 E-0.04000 F2100.000
G1 Z10.200 F10800.000
G1 X167.200 Y122.200
G1 Z9.800
G1 E0.80000 F2100.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F1800.000
G1 X160.962 Y122.200 E0.41671
G1 X160.962 Y120.800 E0.09353
G1 X167.200 Y120.800 E0.41671
G1 X167.200 Y122.140 E0.08952
M204 S1000
G1 X166.801 Y122.171 F10800.000
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:10.1
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;10.1


;WIPE_START
G1 F8640.000
G1 X163.909 Y122.172 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z10.200 F10800.000
;AFTER_LAYER_CHANGE
;10.1
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X151.286 Y119.325
G1 Z10.100
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
M73 Q69 S6
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.265 E1.55342
M204 S1000
G1 X150.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X149.124 Y120.800 E0.15832
M73 P69 R6
G1 X100.876 Y120.800 E3.22326
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.064 E1.88315
M204 S1000
G1 X151.006 Y119.467 F10800.000
G1 X151.714 Y119.325
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X153.675 Y121.286 E0.15062
G1 X166.714 Y121.286 E0.70849
G1 X166.714 Y121.714 E0.02330
G1 X83.286 Y121.714 E4.53292
G1 X83.286 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.70849
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.265 E1.54523
M204 S1000
G1 X152.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X153.876 Y120.800 E0.15832
G1 X167.200 Y120.800 E0.89013
G1 X167.200 Y122.200 E0.09353
G1 X82.800 Y122.200 E5.63838
M73 P70 R6
M73 Q70 S6
G1 X82.800 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.89013
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.064 E1.89995
M204 S1000
G1 X152.010 Y119.477 F10800.000
;WIPE_START
G1 F8640.000
G1 X153.876 Y120.800 E-0.55709
G1 X154.755 Y120.800 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z10.500 F10800.000
G1 X152.526 Y120.599
G1 Z10.100
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X151.736 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X152.526 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z10.500 F10800.000
G1 X98.264 Y121.388
G1 Z10.100
G1 E0.80000 F2100.000
G1 F5100.000
G1 X97.474 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:10.4
;HEIGHT:0.299999
;BEFORE_LAYER_CHANGE
G92 E0.0
;10.4


;WIPE_START
G1 F8640.000
G1 X98.264 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z10.500 F10800.000
;AFTER_LAYER_CHANGE
;10.4
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X100.675 Y121.286
G1 Z10.400
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F3000.000
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.735 Y121.286 E2.64008
M204 S1000
G1 X100.876 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
M73 Q71 S6
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
M73 P71 R6
G1 X149.124 Y120.800 E0.15832
G1 X100.936 Y120.800 E3.21925
M204 S1000
G1 X100.532 Y121.004 F10800.000
;WIPE_START
G1 F8640.000
G1 X99.200 Y119.124 E-0.55709
G1 X99.200 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z10.800 F10800.000
G1 X96.325 Y121.286
G1 Z10.400
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X166.714 Y121.286 E0.70849
G1 X166.714 Y121.714 E0.02330
G1 X83.286 Y121.714 E4.53292
G1 X83.286 Y121.286 E0.02330
G1 X96.265 Y121.286 E0.70523
M204 S1000
G1 X96.124 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X167.200 Y120.800 E0.89013
M73 Q72 S6
G1 X167.200 Y122.200 E0.09353
G1 X82.800 Y122.200 E5.63838
M73 P72 R6
G1 X82.800 Y120.800 E0.09353
G1 X96.064 Y120.800 E0.88612
M204 S1000
G1 X96.477 Y120.988 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.800 Y119.124 E-0.55709
G1 X97.800 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z10.800 F10800.000
G1 X97.474 Y120.599
G1 Z10.400
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z10.800 F10800.000
G1 X151.736 Y121.388
G1 Z10.400
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:10.7
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;10.7


;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z10.800 F10800.000
;AFTER_LAYER_CHANGE
;10.7
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X151.286 Y119.325
G1 Z10.700
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F3000.000
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.265 E1.55342
M204 S1000
G1 X150.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
M73 Q73 S6
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.064 E1.88315
M204 S1000
M73 P73 R6
G1 X151.006 Y119.467 F10800.000
G1 X151.714 Y119.325
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X153.675 Y121.286 E0.15062
G1 X166.714 Y121.286 E0.70849
G1 X166.714 Y121.714 E0.02330
G1 X83.286 Y121.714 E4.53292
G1 X83.286 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.70849
M73 P73 R5
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.265 E1.54523
M204 S1000
G1 X152.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X153.876 Y120.800 E0.15832
G1 X167.200 Y120.800 E0.89013
M73 Q73 S5
G1 X167.200 Y122.200 E0.09353
G1 X82.800 Y122.200 E5.63838
G1 X82.800 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.89013
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.064 E1.89995
M204 S1000
M73 Q74 S5
G1 X152.010 Y119.477 F10800.000
;WIPE_START
G1 F8640.000
G1 X153.876 Y120.800 E-0.55709
G1 X154.755 Y120.800 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z11.100 F10800.000
G1 X152.526 Y120.599
M73 P74 R5
G1 Z10.700
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X151.736 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X152.526 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z11.100 F10800.000
G1 X98.264 Y121.388
G1 Z10.700
G1 E0.80000 F2100.000
G1 F5100.000
G1 X97.474 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:11
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;11


;WIPE_START
G1 F8640.000
G1 X98.264 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z11.100 F10800.000
;AFTER_LAYER_CHANGE
;11
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X100.675 Y121.286
G1 Z11.000
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F3000.000
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.735 Y121.286 E2.64008
M204 S1000
G1 X100.876 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
G1 X149.124 Y120.800 E0.15832
G1 X100.936 Y120.800 E3.21925
M204 S1000
G1 X100.532 Y121.004 F10800.000
;WIPE_START
G1 F8640.000
G1 X99.200 Y119.124 E-0.55709
G1 X99.200 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z11.400 F10800.000
G1 X96.325 Y121.286
G1 Z11.000
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
M73 Q75 S5
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
M73 P75 R5
G1 X153.675 Y121.286 E0.15062
G1 X166.714 Y121.286 E0.70849
G1 X166.714 Y121.714 E0.02330
G1 X83.286 Y121.714 E4.53292
G1 X83.286 Y121.286 E0.02330
G1 X96.265 Y121.286 E0.70523
M204 S1000
G1 X96.124 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X167.200 Y120.800 E0.89013
G1 X167.200 Y122.200 E0.09353
G1 X82.800 Y122.200 E5.63838
G1 X82.800 Y120.800 E0.09353
G1 X96.064 Y120.800 E0.88612
M204 S1000
G1 X96.477 Y120.988 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.800 Y119.124 E-0.55709
G1 X97.800 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z11.400 F10800.000
G1 X97.474 Y120.599
G1 Z11.000
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z11.400 F10800.000
G1 X151.736 Y121.388
G1 Z11.000
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:11.3
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;11.3


;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z11.400 F10800.000
;AFTER_LAYER_CHANGE
;11.3
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X151.286 Y119.325
G1 Z11.300
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F3000.000
G1 X149.325 Y121.286 E0.15062
M73 Q76 S5
G1 X100.675 Y121.286 E2.64334
M73 P76 R5
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.265 E1.55342
M204 S1000
G1 X150.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.064 E1.88315
M204 S1000
G1 X151.006 Y119.467 F10800.000
G1 X151.714 Y119.325
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X153.675 Y121.286 E0.15062
G1 X166.714 Y121.286 E0.70849
G1 X166.714 Y121.714 E0.02330
G1 X83.286 Y121.714 E4.53292
G1 X83.286 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.70849
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
M73 Q77 S5
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.265 E1.54523
M204 S1000
M73 P77 R5
G1 X152.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X153.876 Y120.800 E0.15832
G1 X167.200 Y120.800 E0.89013
G1 X167.200 Y122.200 E0.09353
G1 X82.800 Y122.200 E5.63838
G1 X82.800 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.89013
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.064 E1.89995
M204 S1000
G1 X152.010 Y119.477 F10800.000
;WIPE_START
G1 F8640.000
G1 X153.876 Y120.800 E-0.55709
G1 X154.755 Y120.800 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z11.700 F10800.000
G1 X152.526 Y120.599
G1 Z11.300
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X151.736 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X152.526 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z11.700 F10800.000
G1 X98.264 Y121.388
G1 Z11.300
G1 E0.80000 F2100.000
G1 F5100.000
G1 X97.474 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:11.6
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;11.6


;WIPE_START
G1 F8640.000
G1 X98.264 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z11.700 F10800.000
;AFTER_LAYER_CHANGE
;11.6
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X100.675 Y121.286
G1 Z11.600
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F3000.000
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.735 Y121.286 E2.64008
M204 S1000
M73 P78 R5
M73 Q78 S5
G1 X100.876 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
M73 P78 R4
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
M73 Q78 S4
G1 X149.124 Y120.800 E0.15832
G1 X100.936 Y120.800 E3.21925
M204 S1000
G1 X100.532 Y121.004 F10800.000
;WIPE_START
G1 F8640.000
G1 X99.200 Y119.124 E-0.55709
G1 X99.200 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z12.000 F10800.000
G1 X96.325 Y121.286
G1 Z11.600
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X166.714 Y121.286 E0.70849
G1 X166.714 Y121.714 E0.02330
G1 X83.286 Y121.714 E4.53292
G1 X83.286 Y121.286 E0.02330
G1 X96.265 Y121.286 E0.70523
M204 S1000
G1 X96.124 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
M73 P79 R4
M73 Q79 S4
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X167.200 Y120.800 E0.89013
G1 X167.200 Y122.200 E0.09353
G1 X82.800 Y122.200 E5.63838
G1 X82.800 Y120.800 E0.09353
G1 X96.064 Y120.800 E0.88612
M204 S1000
G1 X96.477 Y120.988 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.800 Y119.124 E-0.55709
G1 X97.800 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z12.000 F10800.000
G1 X97.474 Y120.599
G1 Z11.600
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z12.000 F10800.000
G1 X151.736 Y121.388
G1 Z11.600
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:11.9
;HEIGHT:0.299999
;BEFORE_LAYER_CHANGE
G92 E0.0
;11.9


;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z12.000 F10800.000
;AFTER_LAYER_CHANGE
;11.9
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X151.286 Y119.325
G1 Z11.900
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F3000.000
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.265 E1.55342
M204 S1000
G1 X150.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
M73 Q80 S4
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
M73 P80 R4
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.064 E1.88315
M204 S1000
G1 X151.006 Y119.467 F10800.000
G1 X151.714 Y119.325
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X153.675 Y121.286 E0.15062
G1 X166.714 Y121.286 E0.70849
G1 X166.714 Y121.714 E0.02330
G1 X83.286 Y121.714 E4.53292
G1 X83.286 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.70849
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.265 E1.54523
M204 S1000
G1 X152.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X153.876 Y120.800 E0.15832
G1 X167.200 Y120.800 E0.89013
G1 X167.200 Y122.200 E0.09353
G1 X82.800 Y122.200 E5.63838
G1 X82.800 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.89013
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
M73 P81 R4
M73 Q81 S4
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.064 E1.89995
M204 S1000
G1 X152.010 Y119.477 F10800.000
;WIPE_START
G1 F8640.000
G1 X153.876 Y120.800 E-0.55709
G1 X154.755 Y120.800 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z12.300 F10800.000
G1 X152.526 Y120.599
G1 Z11.900
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X151.736 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X152.526 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z12.300 F10800.000
G1 X98.264 Y121.388
G1 Z11.900
G1 E0.80000 F2100.000
G1 F5100.000
G1 X97.474 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:12.2
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;12.2


;WIPE_START
G1 F8640.000
G1 X98.264 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z12.300 F10800.000
;AFTER_LAYER_CHANGE
;12.2
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X100.675 Y121.286
G1 Z12.200
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F3000.000
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.735 Y121.286 E2.64008
M204 S1000
G1 X100.876 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
G1 X149.124 Y120.800 E0.15832
G1 X100.936 Y120.800 E3.21925
M204 S1000
M73 P82 R4
M73 Q82 S4
G1 X100.532 Y121.004 F10800.000
;WIPE_START
G1 F8640.000
G1 X99.200 Y119.124 E-0.55709
G1 X99.200 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z12.600 F10800.000
G1 X96.325 Y121.286
G1 Z12.200
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X166.664 Y121.286 E0.70577
G1 X166.664 Y121.714 E0.02330
G1 X83.336 Y121.714 E4.52749
G1 X83.336 Y121.286 E0.02330
G1 X96.265 Y121.286 E0.70251
M204 S1000
G1 X96.124 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X167.150 Y120.800 E0.88679
G1 X167.150 Y122.200 E0.09353
G1 X82.850 Y122.200 E5.63170
M73 P82 R3
M73 Q83 S4
G1 X82.850 Y120.800 E0.09353
M73 P83 R3
G1 X96.064 Y120.800 E0.88278
M204 S1000
G1 X96.477 Y120.988 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.800 Y119.124 E-0.55709
G1 X97.800 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z12.600 F10800.000
G1 X97.474 Y120.599
G1 Z12.200
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z12.600 F10800.000
G1 X151.736 Y121.388
M73 Q83 S3
G1 Z12.200
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:12.5
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;12.5


;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z12.600 F10800.000
;AFTER_LAYER_CHANGE
;12.5
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X151.286 Y119.325
G1 Z12.500
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F3000.000
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.265 E1.55342
M204 S1000
G1 X150.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.064 E1.88315
M204 S1000
G1 X151.006 Y119.467 F10800.000
G1 X151.714 Y119.325
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X153.675 Y121.286 E0.15062
G1 X166.364 Y121.286 E0.68947
G1 X166.364 Y121.714 E0.02330
G1 X83.636 Y121.714 E4.49489
M73 P84 R3
M73 Q84 S3
G1 X83.636 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.68947
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.265 E1.54523
M204 S1000
G1 X152.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X153.876 Y120.800 E0.15832
G1 X166.850 Y120.800 E0.86675
G1 X166.850 Y122.200 E0.09353
G1 X83.150 Y122.200 E5.59161
G1 X83.150 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.86675
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.064 E1.89995
M204 S1000
G1 X152.010 Y119.477 F10800.000
;WIPE_START
G1 F8640.000
G1 X153.876 Y120.800 E-0.55709
G1 X154.755 Y120.800 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z12.900 F10800.000
G1 X152.526 Y120.599
G1 Z12.500
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X151.736 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X152.526 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z12.900 F10800.000
G1 X98.264 Y121.388
G1 Z12.500
G1 E0.80000 F2100.000
G1 F5100.000
G1 X97.474 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:12.8
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;12.8


;WIPE_START
G1 F8640.000
G1 X98.264 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z12.900 F10800.000
;AFTER_LAYER_CHANGE
;12.8
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X100.675 Y121.286
G1 Z12.800
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F3000.000
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
M73 P85 R3
M73 Q85 S3
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.735 Y121.286 E2.64008
M204 S1000
G1 X100.876 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
G1 X149.124 Y120.800 E0.15832
G1 X100.936 Y120.800 E3.21925
M204 S1000
G1 X100.532 Y121.004 F10800.000
;WIPE_START
G1 F8640.000
G1 X99.200 Y119.124 E-0.55709
G1 X99.200 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z13.200 F10800.000
G1 X96.325 Y121.286
G1 Z12.800
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X166.064 Y121.286 E0.67317
G1 X166.064 Y121.714 E0.02330
G1 X83.936 Y121.714 E4.46229
M73 P86 R3
M73 Q86 S3
G1 X83.936 Y121.286 E0.02330
G1 X96.265 Y121.286 E0.66991
M204 S1000
G1 X96.124 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X166.550 Y120.800 E0.84671
G1 X166.550 Y122.200 E0.09353
G1 X83.450 Y122.200 E5.55153
G1 X83.450 Y120.800 E0.09353
G1 X96.064 Y120.800 E0.84270
M204 S1000
G1 X96.478 Y120.987 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.800 Y119.124 E-0.55709
G1 X97.800 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z13.200 F10800.000
G1 X97.474 Y120.599
G1 Z12.800
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z13.200 F10800.000
G1 X151.736 Y121.388
G1 Z12.800
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:13.1
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;13.1


;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z13.200 F10800.000
;AFTER_LAYER_CHANGE
;13.1
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X151.286 Y119.325
G1 Z13.100
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F3000.000
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
M73 P87 R3
M73 Q87 S3
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.265 E1.55342
M204 S1000
G1 X150.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.064 E1.88315
M204 S1000
G1 X151.006 Y119.467 F10800.000
G1 X151.714 Y119.325
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X153.675 Y121.286 E0.15062
G1 X165.764 Y121.286 E0.65687
G1 X165.764 Y121.714 E0.02330
G1 X84.236 Y121.714 E4.42969
G1 X84.236 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.65687
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.265 E1.54523
M204 S1000
M73 P87 R2
G1 X152.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X153.876 Y120.800 E0.15832
G1 X166.250 Y120.800 E0.82667
G1 X166.250 Y122.200 E0.09353
G1 X83.750 Y122.200 E5.51145
M73 P88 R2
M73 Q88 S2
G1 X83.750 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.82667
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.064 E1.89995
M204 S1000
G1 X152.010 Y119.477 F10800.000
;WIPE_START
G1 F8640.000
G1 X153.876 Y120.800 E-0.55709
G1 X154.755 Y120.800 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z13.500 F10800.000
G1 X152.526 Y120.599
G1 Z13.100
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X151.736 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X152.526 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z13.500 F10800.000
G1 X98.264 Y121.388
G1 Z13.100
G1 E0.80000 F2100.000
G1 F5100.000
G1 X97.474 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:13.4
;HEIGHT:0.299999
;BEFORE_LAYER_CHANGE
G92 E0.0
;13.4


;WIPE_START
G1 F8640.000
G1 X98.264 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z13.500 F10800.000
;AFTER_LAYER_CHANGE
;13.4
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X100.675 Y121.286
G1 Z13.400
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F3000.000
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.735 Y121.286 E2.64008
M204 S1000
G1 X100.876 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
M73 P89 R2
M73 Q89 S2
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
G1 X149.124 Y120.800 E0.15832
G1 X100.936 Y120.800 E3.21925
M204 S1000
G1 X100.532 Y121.004 F10800.000
;WIPE_START
G1 F8640.000
G1 X99.200 Y119.124 E-0.55709
G1 X99.200 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z13.800 F10800.000
G1 X96.325 Y121.286
G1 Z13.400
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X165.464 Y121.286 E0.64057
G1 X165.464 Y121.714 E0.02330
G1 X84.536 Y121.714 E4.39709
G1 X84.536 Y121.286 E0.02330
G1 X96.265 Y121.286 E0.63731
M204 S1000
G1 X96.124 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X165.950 Y120.800 E0.80663
G1 X165.950 Y122.200 E0.09353
G1 X84.050 Y122.200 E5.47136
M73 P90 R2
M73 Q90 S2
G1 X84.050 Y120.800 E0.09353
G1 X96.064 Y120.800 E0.80262
M204 S1000
G1 X96.478 Y120.987 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.800 Y119.124 E-0.55709
G1 X97.800 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z13.800 F10800.000
G1 X97.474 Y120.599
G1 Z13.400
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X98.264 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X97.474 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z13.800 F10800.000
G1 X151.736 Y121.388
G1 Z13.400
G1 E0.80000 F2100.000
G1 F5100.000
G1 X152.526 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:13.7
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;13.7


;WIPE_START
G1 F8640.000
G1 X151.736 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z13.800 F10800.000
;AFTER_LAYER_CHANGE
;13.7
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X151.286 Y119.325
G1 Z13.700
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F3000.000
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.265 E1.55342
M204 S1000
G1 X150.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.064 E1.88315
M204 S1000
M73 P91 R2
M73 Q91 S2
G1 X151.006 Y119.467 F10800.000
G1 X151.714 Y119.325
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X153.675 Y121.286 E0.15062
G1 X165.164 Y121.286 E0.62427
G1 X165.164 Y121.714 E0.02330
G1 X84.836 Y121.714 E4.36449
G1 X84.836 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.62427
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.265 E1.54523
M204 S1000
G1 X152.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X153.876 Y120.800 E0.15832
G1 X165.650 Y120.800 E0.78658
G1 X165.650 Y122.200 E0.09353
G1 X84.350 Y122.200 E5.43128
G1 X84.350 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.78658
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.064 E1.89995
M204 S1000
G1 X152.010 Y119.477 F10800.000
;WIPE_START
G1 F8640.000
G1 X153.876 Y120.800 E-0.55709
G1 X154.755 Y120.800 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z14.100 F10800.000
M73 P92 R2
G1 X152.526 Y120.599
G1 Z13.700
M73 Q92 S2
G1 E0.80000 F2100.000
;TYPE:Internal infill
;WIDTH:0.5
G1 F5100.000
G1 X151.736 Y121.388 E0.06063
;WIPE_START
G1 F8640.000
G1 X152.526 Y120.599 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z14.100 F10800.000
G1 X98.264 Y121.388
G1 Z13.700
G1 E0.80000 F2100.000
G1 F5100.000
G1 X97.474 Y120.599 E0.06063
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:14
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;14


;WIPE_START
G1 F8640.000
G1 X98.264 Y121.388 E-0.25767
;WIPE_END
G1 E-0.54233 F2100.000
G1 Z14.100 F10800.000
;AFTER_LAYER_CHANGE
;14
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X100.675 Y121.286
G1 Z14.000
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
G1 F3000.000
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
G1 X149.325 Y121.286 E0.15062
G1 X100.735 Y121.286 E2.64008
M204 S1000
G1 X100.876 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
G1 X149.124 Y120.800 E0.15832
G1 X100.936 Y120.800 E3.21925
M204 S1000
M73 P92 R1
M73 Q92 S1
G1 X100.532 Y121.004 F10800.000
;WIPE_START
G1 F8640.000
G1 X99.200 Y119.124 E-0.55709
G1 X99.200 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z14.400 F10800.000
G1 X96.325 Y121.286
G1 Z14.000
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
M73 P93 R1
M73 Q93 S1
G1 X153.675 Y121.286 E0.15062
G1 X164.864 Y121.286 E0.60797
G1 X164.864 Y121.714 E0.02330
G1 X85.136 Y121.714 E4.33189
G1 X85.136 Y121.286 E0.02330
G1 X96.265 Y121.286 E0.60471
M204 S1000
G1 X96.124 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X165.350 Y120.800 E0.76654
G1 X165.350 Y122.200 E0.09353
G1 X84.650 Y122.200 E5.39120
G1 X84.650 Y120.800 E0.09353
G1 X96.064 Y120.800 E0.76253
M204 S1000
G1 X96.478 Y120.986 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.800 Y119.124 E-0.55709
G1 X97.800 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z14.400 F10800.000
G1 X97.338 Y121.584
G1 Z14.000
G1 E0.80000 F2100.000
;TYPE:Solid infill
;WIDTH:0.511889
G1 F4800.000
G1 X96.914 Y121.159 E0.03349
G1 X97.230 Y120.843 E0.02498
G1 X97.775 Y121.388 E0.04299
G1 X98.408 Y121.388 E0.03532
G1 X97.546 Y120.527 E0.06797
G1 X97.863 Y120.210 E0.02498
G1 X99.040 Y121.388 E0.09295
G1 X99.673 Y121.388 E0.03532
G1 X98.179 Y119.894 E0.11792
G1 X98.496 Y119.577 E0.02498
G1 X100.502 Y121.584 E0.15838
;WIPE_START
G1 F8640.000
G1 X98.496 Y119.577 E-0.65518
G1 X98.179 Y119.894 E-0.10333
G1 X98.184 Y119.898 E-0.00149
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z14.400 F10800.000
G1 X150.338 Y121.584
G1 Z14.000
G1 E0.80000 F2100.000
G1 F4800.000
G1 X149.914 Y121.159 E0.03349
G1 X150.230 Y120.843 E0.02498
G1 X150.775 Y121.388 E0.04299
G1 X151.408 Y121.388 E0.03532
G1 X150.546 Y120.527 E0.06797
G1 X150.863 Y120.210 E0.02498
G1 X152.040 Y121.388 E0.09295
G1 X152.673 Y121.388 E0.03532
G1 X151.179 Y119.894 E0.11792
G1 X151.496 Y119.577 E0.02498
G1 X153.502 Y121.584 E0.15838
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:14.3
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;14.3


;WIPE_START
G1 F8640.000
G1 X151.496 Y119.577 E-0.65518
G1 X151.179 Y119.894 E-0.10333
G1 X151.184 Y119.898 E-0.00149
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z14.400 F10800.000
;AFTER_LAYER_CHANGE
;14.3
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X151.286 Y119.325
G1 Z14.300
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X149.325 Y121.286 E0.15062
G1 X100.675 Y121.286 E2.64334
M73 P94 R1
M73 Q94 S1
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.265 E1.55342
M204 S1000
G1 X150.800 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X149.124 Y120.800 E0.15832
G1 X100.876 Y120.800 E3.22326
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.064 E1.88315
M204 S1000
G1 X151.006 Y119.467 F10800.000
G1 X151.714 Y119.325
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X153.675 Y121.286 E0.15062
G1 X164.564 Y121.286 E0.59167
G1 X164.564 Y121.714 E0.02330
G1 X85.436 Y121.714 E4.29929
G1 X85.436 Y121.286 E0.02330
G1 X96.325 Y121.286 E0.59167
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
M73 P95 R1
G1 X151.714 Y90.825 E0.19515
M73 Q95 S1
G1 X151.714 Y119.265 E1.54523
M204 S1000
G1 X152.200 Y119.124 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X153.876 Y120.800 E0.15832
G1 X165.050 Y120.800 E0.74650
G1 X165.050 Y122.200 E0.09353
G1 X84.950 Y122.200 E5.35111
G1 X84.950 Y120.800 E0.09353
G1 X96.124 Y120.800 E0.74650
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.064 E1.89995
M204 S1000
G1 X152.010 Y119.477 F10800.000
;WIPE_START
G1 F8640.000
G1 X153.876 Y120.800 E-0.55709
G1 X154.755 Y120.800 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z14.700 F10800.000
G1 X152.662 Y121.584
G1 Z14.300
G1 E0.80000 F2100.000
;TYPE:Solid infill
;WIDTH:0.511889
G1 F4800.000
G1 X153.086 Y121.159 E0.03349
G1 X152.770 Y120.843 E0.02498
G1 X152.225 Y121.388 E0.04300
G1 X151.592 Y121.388 E0.03532
G1 X152.453 Y120.527 E0.06797
G1 X152.137 Y120.210 E0.02498
G1 X150.959 Y121.388 E0.09295
G1 X150.327 Y121.388 E0.03532
G1 X151.821 Y119.894 E0.11793
G1 X151.504 Y119.577 E0.02498
G1 X149.498 Y121.584 E0.15838
;WIPE_START
G1 F8640.000
G1 X151.504 Y119.577 E-0.65521
G1 X151.821 Y119.894 E-0.10333
G1 X151.816 Y119.898 E-0.00146
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z14.700 F10800.000
G1 X99.662 Y121.584
G1 Z14.300
G1 E0.80000 F2100.000
G1 F4800.000
G1 X100.086 Y121.159 E0.03349
G1 X99.770 Y120.843 E0.02498
G1 X99.225 Y121.388 E0.04300
G1 X98.592 Y121.388 E0.03532
G1 X99.453 Y120.527 E0.06797
G1 X99.137 Y120.210 E0.02498
G1 X97.959 Y121.388 E0.09295
G1 X97.327 Y121.388 E0.03532
G1 X98.821 Y119.894 E0.11793
G1 X98.504 Y119.577 E0.02498
G1 X96.498 Y121.584 E0.15838
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:14.6
;HEIGHT:0.3
;BEFORE_LAYER_CHANGE
G92 E0.0
;14.6


;WIPE_START
G1 F8640.000
G1 X98.504 Y119.577 E-0.65521
G1 X98.821 Y119.894 E-0.10333
G1 X98.816 Y119.898 E-0.00146
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z14.700 F10800.000
;AFTER_LAYER_CHANGE
;14.6
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X100.675 Y121.286
G1 Z14.600
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.714 Y119.325 E0.15062
G1 X98.714 Y90.675 E1.55668
G1 X100.675 Y88.714 E0.15062
G1 X149.325 Y88.714 E2.64334
G1 X151.286 Y90.675 E0.15062
G1 X151.286 Y119.325 E1.55668
M73 P96 R1
M73 Q96 S1
G1 X149.325 Y121.286 E0.15062
G1 X100.735 Y121.286 E2.64008
M204 S1000
G1 X100.876 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X99.200 Y119.124 E0.15832
G1 X99.200 Y90.876 E1.88715
G1 X100.876 Y89.200 E0.15832
G1 X149.124 Y89.200 E3.22326
G1 X150.800 Y90.876 E0.15832
G1 X150.800 Y119.124 E1.88715
G1 X149.124 Y120.800 E0.15832
G1 X100.936 Y120.800 E3.21925
M204 S1000
G1 X100.532 Y121.004 F10800.000
;WIPE_START
G1 F8640.000
G1 X99.200 Y119.124 E-0.55709
G1 X99.200 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z15.000 F10800.000
G1 X96.325 Y121.286
G1 Z14.600
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F3000.000
G1 X98.286 Y119.325 E0.15062
G1 X98.286 Y90.825 E1.54849
G1 X100.825 Y88.286 E0.19515
G1 X149.175 Y88.286 E2.62695
G1 X151.714 Y90.825 E0.19515
G1 X151.714 Y119.325 E1.54849
G1 X153.675 Y121.286 E0.15062
G1 X164.264 Y121.286 E0.57537
G1 X164.264 Y121.714 E0.02330
G1 X85.736 Y121.714 E4.26669
G1 X85.736 Y121.286 E0.02330
G1 X96.265 Y121.286 E0.57211
M204 S1000
G1 X96.124 Y120.800 F10800.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 F2100.000
G1 X97.800 Y119.124 E0.15832
G1 X97.800 Y90.624 E1.90395
M73 P97 R1
G1 X100.624 Y87.800 E0.26683
G1 X149.376 Y87.800 E3.25686
M73 Q97 S1
G1 X152.200 Y90.624 E0.26683
G1 X152.200 Y119.124 E1.90395
G1 X153.876 Y120.800 E0.15832
G1 X164.750 Y120.800 E0.72646
G1 X164.750 Y122.200 E0.09353
G1 X85.250 Y122.200 E5.31103
G1 X85.250 Y120.800 E0.09353
G1 X96.064 Y120.800 E0.72245
M204 S1000
G1 X96.479 Y120.985 F10800.000
;WIPE_START
G1 F8640.000
G1 X97.800 Y119.124 E-0.55709
G1 X97.800 Y118.245 E-0.20291
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z15.000 F10800.000
G1 X97.338 Y121.584
G1 Z14.600
G1 E0.80000 F2100.000
;TYPE:Solid infill
;WIDTH:0.511889
G1 F4800.000
G1 X96.914 Y121.159 E0.03349
G1 X97.230 Y120.843 E0.02498
G1 X97.775 Y121.388 E0.04299
G1 X98.408 Y121.388 E0.03532
G1 X97.546 Y120.527 E0.06797
G1 X97.863 Y120.210 E0.02498
G1 X99.040 Y121.388 E0.09295
G1 X99.673 Y121.388 E0.03532
G1 X98.179 Y119.894 E0.11792
G1 X98.496 Y119.577 E0.02498
G1 X100.502 Y121.584 E0.15838
;WIPE_START
G1 F8640.000
G1 X98.496 Y119.577 E-0.65518
G1 X98.179 Y119.894 E-0.10333
G1 X98.184 Y119.898 E-0.00149
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z15.000 F10800.000
M73 P97 R0
G1 X150.338 Y121.584
G1 Z14.600
G1 E0.80000 F2100.000
G1 F4800.000
G1 X149.914 Y121.159 E0.03349
M73 Q97 S0
G1 X150.230 Y120.843 E0.02498
G1 X150.775 Y121.388 E0.04299
G1 X151.408 Y121.388 E0.03532
G1 X150.546 Y120.527 E0.06797
G1 X150.863 Y120.210 E0.02498
G1 X152.040 Y121.388 E0.09295
G1 X152.673 Y121.388 E0.03532
G1 X151.179 Y119.894 E0.11792
G1 X151.496 Y119.577 E0.02498
G1 X153.502 Y121.584 E0.15838
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;LAYER_CHANGE
;Z:14.9
;HEIGHT:0.299999
;BEFORE_LAYER_CHANGE
G92 E0.0
;14.9


;WIPE_START
G1 F8640.000
G1 X151.496 Y119.577 E-0.65518
G1 X151.179 Y119.894 E-0.10333
G1 X151.184 Y119.898 E-0.00149
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z15.000 F10800.000
;AFTER_LAYER_CHANGE
;14.9
; printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
G1 X151.050 Y119.228
G1 Z14.900
G1 E0.80000 F2100.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 X149.228 Y121.050 E0.17215
G1 X100.772 Y121.050 E3.23710
G1 X98.950 Y119.228 E0.17215
G1 X98.950 Y90.772 E1.90099
G1 X100.772 Y88.950 E0.17215
G1 X149.228 Y88.950 E3.23710
G1 X151.050 Y90.772 E0.17215
M73 P98 R0
G1 X151.050 Y119.168 E1.89698
M204 S1000
M73 Q98 S0
G1 X151.257 Y119.570 F10800.000
;WIPE_START
G1 F8640.000
G1 X149.228 Y121.050 E-0.60490
G1 X148.556 Y121.050 E-0.15510
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z15.300 F10800.000
G1 X100.500 Y121.464
G1 Z14.900
G1 E0.80000 F2100.000
M204 S800
;TYPE:Perimeter
;WIDTH:0.5
G1 F1800.000
G1 X96.500 Y121.464 E0.21731
G1 X98.500 Y119.465 E0.15366
G1 X100.457 Y121.422 E0.15040
M204 S1000
;WIPE_START
G1 F8640.000
G1 X97.166 Y121.457 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z15.300 F10800.000
G1 X149.500 Y121.464
G1 Z14.900
G1 E0.80000 F2100.000
M204 S800
G1 F1800.000
G1 X151.500 Y119.465 E0.15366
G1 X153.500 Y121.464 E0.15366
G1 X149.560 Y121.464 E0.21405
M204 S1000
;WIPE_START
G1 F8640.000
G1 X151.500 Y119.465 E-0.64330
G1 X151.857 Y119.822 E-0.11670
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z15.300 F10800.000
G1 X151.950 Y119.228
G1 Z14.900
G1 E0.80000 F2100.000
M204 S800
;TYPE:External perimeter
;WIDTH:0.6
G1 X153.772 Y121.050 E0.17215
G1 X164.450 Y121.050 E0.71334
G1 X164.450 Y121.950 E0.06012
G1 X85.550 Y121.950 E5.27095
G1 X85.550 Y121.050 E0.06012
G1 X96.228 Y121.050 E0.71334
G1 X98.050 Y119.228 E0.17215
G1 X98.050 Y90.728 E1.90395
G1 X100.728 Y88.050 E0.25299
G1 X149.272 Y88.050 E3.24303
G1 X151.950 Y90.728 E0.25299
G1 X151.950 Y119.168 E1.89995
M204 S1000
G1 X151.760 Y119.580 F10800.000
G1 X151.500 Y118.914
;TYPE:Gap fill
;WIDTH:0.478763
G1 F2400.000
G1 X151.500 Y90.621 E1.46228
G1 X151.357 Y90.607 F10800.000
;WIDTH:0.246528
G1 F2400.000
G1 X150.302 Y89.552 E0.03391
;WIDTH:0.246532
G1 X149.393 Y88.643 E0.02921
G1 X148.860 Y88.293 E0.01448
G1 X149.379 Y88.500 F10800.000
;WIDTH:0.478763
G1 F2400.000
G1 X100.621 Y88.500 E2.51999
G1 X100.607 Y88.643 F10800.000
;WIDTH:0.246527
G1 F2400.000
G1 X98.643 Y90.607 E0.06311
M73 P99 R0
G1 X98.293 Y91.140 E0.01448
G1 X98.500 Y90.621 F10800.000
;WIDTH:0.478763
G1 F2400.000
G1 X98.500 Y118.914 E1.46228
;WIPE_START
M73 Q99 S0
G1 F8640.000
G1 X98.500 Y115.623 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z15.300 F10800.000
G1 X99.388 Y121.336
G1 Z14.900
G1 E0.80000 F2100.000
;TYPE:Top solid infill
;WIDTH:0.473773
G1 F2400.000
G1 X99.666 Y121.058 E0.02012
G1 X99.377 Y120.768 E0.02090
G1 X98.982 Y121.163 E0.02849
G1 X98.403 Y121.163 E0.02956
G1 X99.087 Y120.479 E0.04940
G1 X98.798 Y120.189 E0.02090
G1 X97.824 Y121.163 E0.07030
G1 X97.245 Y121.163 E0.02956
G1 X98.631 Y119.777 E0.10007
;WIPE_START
G1 F8640.000
G1 X97.245 Y121.163 E-0.45252
G1 X97.824 Y121.163 E-0.13369
G1 X98.357 Y120.630 E-0.17380
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z15.300 F10800.000
G1 X100.879 Y121.500
G1 Z14.900
G1 E0.80000 F2100.000
;TYPE:Gap fill
;WIDTH:0.478763
G1 F2400.000
G1 X149.121 Y121.500 E2.49336
;WIPE_START
G1 F8640.000
G1 X145.830 Y121.500 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z15.300 F10800.000
G1 X152.789 Y120.935
G1 Z14.900
G1 E0.80000 F2100.000
;TYPE:Top solid infill
;WIDTH:0.473774
G1 F2400.000
G1 X152.561 Y121.163 E0.01645
G1 X151.982 Y121.163 E0.02956
G1 X152.377 Y120.768 E0.02850
G1 X152.087 Y120.479 E0.02090
G1 X151.403 Y121.163 E0.04940
G1 X150.824 Y121.163 E0.02956
G1 X151.798 Y120.189 E0.07030
G1 X151.508 Y119.900 E0.02090
G1 X150.072 Y121.336 E0.10374
;WIPE_START
G1 F8640.000
G1 X151.508 Y119.900 E-0.46912
G1 X151.798 Y120.189 E-0.09453
G1 X151.197 Y120.790 E-0.19635
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z15.300 F10800.000
G1 X153.879 Y121.500
G1 Z14.900
G1 E0.80000 F2100.000
;TYPE:Gap fill
;WIDTH:0.478763
G1 F2400.000
G1 X164.207 Y121.500 E0.53381
;WIPE_START
G1 F8640.000
G1 X160.916 Y121.500 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z15.300 F10800.000
G1 X151.707 Y91.140
G1 Z14.900
G1 E0.80000 F2100.000
;WIDTH:0.277779
G1 F2400.000
G1 X151.357 Y90.607 E0.01697
;WIPE_START
G1 F8640.000
G1 X151.707 Y91.140 E-0.14719
;WIPE_END
G1 E-0.65281 F2100.000
G1 Z15.300 F10800.000
G1 X101.140 Y88.293
G1 Z14.900
G1 E0.80000 F2100.000
G1 F2400.000
G1 X100.607 Y88.643 E0.01697
;WIPE_START
G1 F8640.000
G1 X101.140 Y88.293 E-0.14719
;WIPE_END
G1 E-0.65281 F2100.000
G1 Z15.300 F10800.000
G1 X96.121 Y121.500
G1 Z14.900
G1 E0.80000 F2100.000
;WIDTH:0.478763
G1 F2400.000
G1 X85.793 Y121.500 E0.53381
; stop printing object MPCNC~LR2 - AC Adapter Mount.stl id:0 copy 0
;WIPE_START
G1 F8640.000;_WIPE
G1 X89.084 Y121.500 E-0.76000
;WIPE_END
G1 E-0.04000 F2100.000
G1 Z15.300 F10800.000
M107
;TYPE:Custom
; Filament-specific end gcode
G4 ; wait
M221 S100 ; reset flow
M900 K0 ; reset LA

M104 S0 ; turn off temperature
M140 S0 ; turn off heatbed
M107 ; turn off fan
G1 Z44.9 ; Move print head up
G1 X0 Y200 F3000 ; home X axis
M84 ; disable motors
M73 P100 R0
M73 Q100 S0
; filament used [mm] = 2403.50
; filament used [cm3] = 5.78
; filament used [g] = 7.17
; filament cost = 0.22
; total filament used [g] = 7.17
; total filament cost = 0.22
; estimated printing time (normal mode) = 20m 31s
; estimated printing time (silent mode) = 20m 45s

; avoid_crossing_perimeters = 0
; avoid_crossing_perimeters_max_detour = 0
; bed_custom_model = 
; bed_custom_texture = 
; bed_shape = 0x0,250x0,250x210,0x210
; bed_temperature = 60
; before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
; between_objects_gcode = 
; bottom_fill_pattern = monotonic
; bottom_solid_layers = 3
; bottom_solid_min_thickness = 0.5
; bridge_acceleration = 1000
; bridge_angle = 0
; bridge_fan_speed = 100
; bridge_flow_ratio = 0.95
; bridge_speed = 30
; brim_width = 0
; clip_multipart_objects = 1
; color_change_gcode = M600
; compatible_printers_condition_cummulative = "printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4";"nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)"
; complete_objects = 0
; cooling = 1
; cooling_tube_length = 5
; cooling_tube_retraction = 91.5
; default_acceleration = 1000
; default_filament_profile = "Prusament PLA"
; default_print_profile = 0.15mm QUALITY @MK3
; deretract_speed = 0
; disable_fan_first_layers = 1
; dont_support_bridges = 1
; draft_shield = 0
; duplicate_distance = 6
; elefant_foot_compensation = 0.2
; end_filament_gcode = "; Filament-specific end gcode"
; end_gcode = G4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
; ensure_vertical_shell_thickness = 1
; external_perimeter_extrusion_width = 0.6
; external_perimeter_speed = 35
; external_perimeters_first = 0
; extra_loading_move = -2
; extra_perimeters = 0
; extruder_clearance_height = 20
; extruder_clearance_radius = 45
; extruder_colour = ""
; extruder_offset = 0x0
; extrusion_axis = E
; extrusion_multiplier = 1
; extrusion_width = 0.5
; fan_always_on = 1
; fan_below_layer_time = 100
; filament_colour = #FF8000
; filament_cooling_final_speed = 3.4
; filament_cooling_initial_speed = 2.2
; filament_cooling_moves = 4
; filament_cost = 30.24
; filament_density = 1.24
; filament_diameter = 1.75
; filament_load_time = 0
; filament_loading_speed = 28
; filament_loading_speed_start = 3
; filament_max_volumetric_speed = 15
; filament_minimal_purge_on_wipe_tower = 15
; filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa"
; filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
; filament_settings_id = "Prusament PLA"
; filament_soluble = 0
; filament_spool_weight = 201
; filament_toolchange_delay = 0
; filament_type = PLA
; filament_unload_time = 0
; filament_unloading_speed = 90
; filament_unloading_speed_start = 100
; filament_vendor = Prusa Polymers
; fill_angle = 45
; fill_density = 20%
; fill_pattern = grid
; first_layer_acceleration = 1000
; first_layer_bed_temperature = 60
; first_layer_extrusion_width = 0.42
; first_layer_height = 0.2
; first_layer_speed = 20
; first_layer_temperature = 215
; full_fan_speed_layer = 4
; gap_fill_speed = 40
; gcode_comments = 0
; gcode_flavor = marlin
; gcode_label_objects = 1
; high_current_on_filament_swap = 0
; host_type = octoprint
; infill_acceleration = 1000
; infill_anchor = 2.5
; infill_anchor_max = 12
; infill_every_layers = 1
; infill_extruder = 1
; infill_extrusion_width = 0.5
; infill_first = 0
; infill_only_where_needed = 0
; infill_overlap = 25%
; infill_speed = 85
; interface_shells = 0
; ironing = 0
; ironing_flowrate = 15%
; ironing_spacing = 0.1
; ironing_speed = 15
; ironing_type = top
; layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
; layer_height = 0.3
; machine_limits_usage = emit_to_gcode
; machine_max_acceleration_e = 5000,5000
; machine_max_acceleration_extruding = 1250,1250
; machine_max_acceleration_retracting = 1250,1250
; machine_max_acceleration_x = 1000,960
; machine_max_acceleration_y = 1000,960
; machine_max_acceleration_z = 200,200
; machine_max_feedrate_e = 120,120
; machine_max_feedrate_x = 200,100
; machine_max_feedrate_y = 200,100
; machine_max_feedrate_z = 12,12
; machine_max_jerk_e = 4.5,4.5
; machine_max_jerk_x = 8,8
; machine_max_jerk_y = 8,8
; machine_max_jerk_z = 0.4,0.4
; machine_min_extruding_rate = 0,0
; machine_min_travel_rate = 0,0
; max_fan_speed = 100
; max_layer_height = 0.25
; max_print_height = 210
; max_print_speed = 200
; max_volumetric_speed = 0
; min_fan_speed = 100
; min_layer_height = 0.07
; min_print_speed = 15
; min_skirt_length = 4
; notes = 
; nozzle_diameter = 0.4
; only_retract_when_crossing_perimeters = 0
; ooze_prevention = 0
; output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
; overhangs = 0
; parking_pos_retraction = 92
; pause_print_gcode = M601
; perimeter_acceleration = 800
; perimeter_extruder = 1
; perimeter_extrusion_width = 0.5
; perimeter_speed = 50
; perimeters = 2
; physical_printer_settings_id = 
; post_process = 
; print_settings_id = 0.30mm DRAFT @MK3
; printer_model = MK3S
; printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
; printer_settings_id = Original Prusa i3 MK3S & MK3S+
; printer_technology = FFF
; printer_variant = 0.4
; printer_vendor = 
; raft_layers = 0
; remaining_times = 1
; resolution = 0
; retract_before_travel = 1
; retract_before_wipe = 0%
; retract_layer_change = 1
; retract_length = 0.8
; retract_length_toolchange = 4
; retract_lift = 0.4
; retract_lift_above = 0
; retract_lift_below = 209
; retract_restart_extra = 0
; retract_restart_extra_toolchange = 0
; retract_speed = 35
; seam_position = nearest
; silent_mode = 1
; single_extruder_multi_material = 0
; single_extruder_multi_material_priming = 0
; skirt_distance = 2
; skirt_height = 3
; skirts = 1
; slice_closing_radius = 0.049
; slowdown_below_layer_time = 15
; small_perimeter_speed = 30
; solid_infill_below_area = 0
; solid_infill_every_layers = 0
; solid_infill_extruder = 1
; solid_infill_extrusion_width = 0.5
; solid_infill_speed = 80
; spiral_vase = 0
; standby_temperature_delta = -5
; start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
; start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
; support_material = 0
; support_material_angle = 0
; support_material_auto = 1
; support_material_buildplate_only = 0
; support_material_contact_distance = 0.1
; support_material_enforce_layers = 0
; support_material_extruder = 0
; support_material_extrusion_width = 0.38
; support_material_interface_contact_loops = 0
; support_material_interface_extruder = 0
; support_material_interface_layers = 2
; support_material_interface_spacing = 0.2
; support_material_interface_speed = 80%
; support_material_pattern = rectilinear
; support_material_spacing = 2
; support_material_speed = 45
; support_material_synchronize_layers = 0
; support_material_threshold = 55
; support_material_with_sheath = 0
; support_material_xy_spacing = 50%
; temperature = 215
; template_custom_gcode = 
; thin_walls = 0
; threads = 6
; thumbnails = 
; toolchange_gcode = 
; top_fill_pattern = monotonic
; top_infill_extrusion_width = 0.45
; top_solid_infill_speed = 40
; top_solid_layers = 4
; top_solid_min_thickness = 0.7
; travel_speed = 180
; use_firmware_retraction = 0
; use_relative_e_distances = 1
; use_volumetric_e = 0
; variable_layer_height = 1
; wipe = 1
; wipe_into_infill = 0
; wipe_into_objects = 0
; wipe_tower = 1
; wipe_tower_bridging = 10
; wipe_tower_no_sparse_layers = 0
; wipe_tower_rotation_angle = 0
; wipe_tower_width = 60
; wipe_tower_x = 170
; wipe_tower_y = 125
; wiping_volumes_extruders = 70,70
; wiping_volumes_matrix = 0
; xy_size_compensation = 0
; z_offset = 0