; HEADER_BLOCK_START ; generated by OrcaSlicer 2.4.2 on 2026-10-26 at 13:16:59 ; BambuStudio G-code viewer: configuration in CONFIG_BLOCK below ; total layer number: 34 ; filament_density: 1.24 ; filament_diameter: 1.75 ; max_z_height: 6.80 ; filament: 1 ; HEADER_BLOCK_END ; external perimeters extrusion width = 0.45mm ; perimeters extrusion width = 0.45mm ; infill extrusion width = 0.45mm ; solid infill extrusion width = 0.45mm ; top infill extrusion width = 0.42mm ; first layer extrusion width = 0.50mm ; EXECUTABLE_BLOCK_START M486 S0 M486 Aangle-test-v1.3-A.stl_id_0_copy_0 M486 S-1 M73 P0 R38 M201 X10000 Y10000 Z400 E5000 M203 X350 Y350 Z12 E100 M204 P7000 R2500 T7000 ; sets acceleration (P, T) and retract acceleration (R), mm/sec^2 M205 X10.00 Y10.00 Z2.00 E10.00 ; sets the jerk limits, mm/sec M205 J0.010 ;TYPE:Custom ; --- Printer Initialization and Checks --- M17 ; enable steppers M862.1 P0.4 A0 F0 ; nozzle check M862.3 P "COREONE" ; printer model check M862.5 P2 ; g-code level check M862.6 P"Input shaper" ; FW feature check M115 U6.3.0+10073 ; --- Print Area and Coordinate System --- M555 X94.5 Y99 W61 H18 ; define print area G90 ; use absolute coordinates M83 ; extruder in relative mode ; --- Preparation --- ; just set the selected bed temp otherwise M140 S35 ; set bed temp M109 R170 ; wait for temp M84 E ; turn off E motor G28 ; home all axes without mesh bed leveling ; -- Chamber Temperature Control -- M141 S20 ; set nominal chamber temp M106 S70 G0 Z40 F10000 M104 T0 S150 M190 R35 ; wait for bed temp M107 G29 G ; absorb heat M109 R170 ; wait for MBL temp M302 S160 ; lower cold extrusion limit to 160C G1 E-2 F2400 ; retraction M73 P22 R29 M84 E ; turn off E motor ; --- Mesh Bed Leveling (MBL) --- G29 P9 X208 Y-2.5 W32 H4 ; limited MBL M84 E ; turn off E motor G29 P1 ; invalidate MBL and probe print area G29 P1 X150 Y0 W100 H20 C ; probe near purge area G29 P3.2 ; MBL interpolation G29 P3.13 ; MBL extrapolation outside probe area G29 A ; activate MBL ; --- Preparation for Purge Line --- M104 S230 G0 X249 Y-2.5 Z15 F4800 ; move away and ready for the purge M109 S230 G92 E0 ; reset extruder position M569 S0 E ; set spreadcycle mode for extruder ; --- Extrude Purge Line --- G92 E0 ; reset extruder position G1 E2 F2400 ; deretraction after the initial one M73 P78 R8 G0 E5 X235 Z0.2 F500 ; purge G0 X225 E4 F500 ; purge G0 X215 E4 F650 ; purge G0 X205 E4 F800 ; purge G0 X202 Z0.05 F8000 ; wipe, close to bed G0 X199 Z0.2 F8000 ; wipe, quickly away from bed G92 E0 ; reset extruder position M221 S100 ; set flow to 100% G90 G21 M83 ; use relative distances for extrusion M900 K0.05 ; Filament gcode M142 S36 ; set heatbreak target temp M106 S0 ;LAYER_CHANGE ;Z:0.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;0.2 G1 E-.7 F2700 ;AFTER_LAYER_CHANGE ;0.2 ;_SET_FAN_SPEED_CHANGING_LAYER M204 P500 ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=0 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 M204 T7000 M486 S0 G1 Z.8 F720 G1 X151.267 Y110.045 F21000 G1 Z.8 F720 M73 P79 R8 G1 Z.2 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.499999 G1 F2700 G1 X151.648 Y109.67 E.0203 G1 X152.049 Y109.124 E.02575 G1 X152.247 Y108.656 E.01932 ;PATH_TASK id=1 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.455059 G1 X152.26 Y108.567 E.00307 ;PATH_TASK id=2 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.425605 G1 X152.273 Y108.479 E.00285 ;PATH_TASK id=3 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.396151 G1 X152.33 Y107.726 E.02218 ;PATH_TASK id=4 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.404055 G1 X152.294 Y107.566 E.0049 ;PATH_TASK id=5 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.452027 G1 X152.258 Y107.407 E.00556 ;PATH_TASK id=6 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X152.222 Y107.248 E.00621 G1 X151.875 Y107.044 E.01528 G1 X151.728 Y107.026 E.00562 G1 X147.834 Y106.96 E.14803 G1 X147.522 Y107.092 E.0129 G1 X147.295 Y107.376 E.0138 G1 X147.239 Y107.641 E.0103 G1 X147.229 Y108.711 E.04067 G1 X147.284 Y108.986 E.01066 G1 X147.484 Y109.25 E.01259 G1 X147.892 Y109.402 E.01653 G1 X148.342 Y109.385 E.01711 G1 X148.013 Y109.674 E.01664 G1 X147.594 Y110.201 E.02558 G1 X147.292 Y110.842 E.02692 G1 X147.183 Y111.457 E.02377 G1 X147.227 Y112.004 E.02083 G1 X147.443 Y112.621 E.02485 ;PATH_TASK id=7 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X147.548 Y112.797 E.00779 G1 X147.998 Y113.303 E.02573 G1 X148.56 Y113.648 E.02507 G1 X148.805 Y113.711 E.00962 ;PATH_TASK id=8 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.472412 G1 X149.051 Y113.774 E.00904 ;PATH_TASK id=9 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.444824 G1 X149.129 Y113.776 E.00261 ;PATH_TASK id=10 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.418363 G1 X149.207 Y113.777 E.00244 ;PATH_TASK id=11 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.391902 G1 X149.866 Y113.8 E.01914 ;PATH_TASK id=12 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.415747 G1 X150.4 Y113.744 E.01664 ;PATH_TASK id=13 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.457873 G1 X150.7 Y113.649 E.01086 ;PATH_TASK id=14 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X151 Y113.554 E.01196 G1 X151.169 Y113.452 E.0075 G1 X151.658 Y113.013 E.02497 G1 X151.993 Y112.464 E.02444 G1 X152.148 Y111.939 E.02082 ;PATH_TASK id=15 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.477814 G1 X152.21 Y111.395 E.0198 ;PATH_TASK id=16 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.468721 G1 X152.167 Y111.156 E.00859 ;PATH_TASK id=0 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X152.123 Y110.917 E.00922 G1 X151.801 Y110.667 E.01551 G1 X151.643 Y110.629 E.00619 G1 X150.714 Y110.518 E.03555 G1 X151.169 Y110.141 E.02245 G1 X151.238 Y110.073 E.00368 ;PATH_TASK id=17 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X152.587 Y108.9 Z.8 F21000 G1 Z.2 F720 G1 E.7 F1500 G1 F2700 G1 X152.571 Y109.242 E.01304 G1 X152.571 Y110.777 E.05831 G1 X152.587 Y111.098 E.01225 ;PATH_TASK id=18 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.468721 G1 X152.603 Y111.42 E.01141 ;PATH_TASK id=19 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.477814 G1 X152.583 Y112.006 E.02119 ;PATH_TASK id=20 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X152.571 Y112.554 E.02082 G1 X152.571 Y114.071 E.05768 G1 X151.105 Y114.071 E.05575 G1 X150.768 Y114.093 E.0128 ;PATH_TASK id=21 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.457873 G1 X150.432 Y114.114 E.01162 ;PATH_TASK id=22 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.415747 G1 X149.726 Y114.134 E.0219 ;PATH_TASK id=23 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.409525 G1 X149.363 Y114.117 E.01107 ;PATH_TASK id=24 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.444824 G1 X149 Y114.099 E.01214 ;PATH_TASK id=25 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.472412 G1 X148.748 Y114.085 E.00904 ;PATH_TASK id=26 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X148.495 Y114.071 E.00962 G1 X140.537 Y114.071 E.30244 G1 X139.64 Y114.087 E.03408 ;PATH_TASK id=27 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.475622 G1 X138.755 Y114.084 E.03185 ;PATH_TASK id=28 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X137.858 Y114.071 E.03411 G1 X131.65 Y114.071 E.23593 ;PATH_TASK id=29 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.541431 G1 X131.265 Y114.051 E.01601 ;PATH_TASK id=30 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.582863 G1 X130.879 Y114.03 E.01734 G1 X130.141 Y114.051 E.03314 ;PATH_TASK id=31 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.563849 G1 X129.63 Y114.04 E.02213 G1 X129.254 Y114.055 E.01631 ;PATH_TASK id=32 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.531924 G1 X128.878 Y114.071 E.01531 ;PATH_TASK id=33 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X122.098 Y114.071 E.25769 ;PATH_TASK id=34 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.541606 G1 X121.908 Y114.051 E.00791 ;PATH_TASK id=35 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.583212 G1 X121.718 Y114.03 E.00857 ;PATH_TASK id=36 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.624818 G1 X121.529 Y114.009 E.00923 ;PATH_TASK id=37 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.666424 G1 X121.339 Y113.988 E.00989 G1 X120.586 Y114.01 E.03907 ;PATH_TASK id=38 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.642472 G1 X120.078 Y114 E.02531 G1 X119.819 Y114.024 E.01298 ;PATH_TASK id=39 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.594981 G1 X119.559 Y114.048 E.01196 ;PATH_TASK id=40 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.54749 G1 X119.3 Y114.071 E.01093 ;PATH_TASK id=41 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X115.759 Y114.071 E.13459 ;PATH_TASK id=42 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.542768 G1 X115.466 Y114.05 E.01219 ;PATH_TASK id=43 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.585537 G1 X115.174 Y114.029 E.01323 ;PATH_TASK id=44 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.628306 G1 X114.881 Y114.007 E.01428 ;PATH_TASK id=45 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.671074 G1 X114.589 Y113.986 E.01532 ;PATH_TASK id=46 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.677826 G1 X113.786 Y113.983 E.04239 G1 X113.504 Y114.005 E.0149 ;PATH_TASK id=47 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.63337 G1 X113.223 Y114.027 E.01385 ;PATH_TASK id=48 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.588913 G1 X112.942 Y114.049 E.01281 ;PATH_TASK id=49 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.544456 G1 X112.66 Y114.071 E.01177 ;PATH_TASK id=50 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X111.776 Y114.071 E.03361 ;PATH_TASK id=51 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.547306 G1 X111.653 Y114.048 E.00525 ;PATH_TASK id=52 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.594613 G1 X111.53 Y114.024 E.00574 ;PATH_TASK id=53 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.64192 G1 X111.407 Y114.001 E.00624 ;PATH_TASK id=54 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.689227 G1 X111.284 Y113.977 E.00673 ;PATH_TASK id=55 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.705764 G1 X111.043 Y113.969 E.01332 ;PATH_TASK id=56 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.717812 G1 X110.485 Y113.963 E.03133 G1 X110.407 Y113.984 E.00449 ;PATH_TASK id=57 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.675637 G1 X110.33 Y114.005 E.00421 ;PATH_TASK id=58 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.633461 G1 X110.253 Y114.026 E.00393 ;PATH_TASK id=59 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.591285 G1 X110.176 Y114.047 E.00365 ;PATH_TASK id=60 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.549109 G1 X109.703 Y114.071 E.01992 ;PATH_TASK id=61 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X97.429 Y114.071 E.46652 G1 X97.429 Y105.929 E.30948 G1 X98.741 Y105.929 E.04989 G1 X98.962 Y105.908 E.00844 ;PATH_TASK id=62 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.45835 G1 X99.183 Y105.887 E.00767 ;PATH_TASK id=63 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.416701 G1 X99.405 Y105.866 E.0069 ;PATH_TASK id=64 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.407155 G1 X103.198 Y105.882 E.11488 ;PATH_TASK id=65 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.447579 G1 X103.448 Y105.902 E.00847 ;PATH_TASK id=66 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.488003 G1 X103.699 Y105.923 E.00931 G1 X103.944 Y105.904 E.00909 ;PATH_TASK id=67 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.451828 G1 X104.189 Y105.886 E.00835 ;PATH_TASK id=68 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.42507 G1 X105.303 Y105.891 E.0354 ;PATH_TASK id=69 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.462535 G1 X105.726 Y105.91 E.01478 ;PATH_TASK id=70 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X106.15 Y105.929 E.0161 G1 X109.601 Y105.929 E.13119 G1 X110.301 Y105.911 E.0266 ;PATH_TASK id=71 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.464656 G1 X111.196 Y105.897 E.03138 ;PATH_TASK id=72 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.468949 G1 X111.515 Y105.913 E.0113 ;PATH_TASK id=73 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X111.833 Y105.929 E.01213 G1 X113.898 Y105.928 E.07847 ;PATH_TASK id=74 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.507682 G1 X115.013 Y105.932 E.0431 G1 X115.943 Y105.929 E.03594 ;PATH_TASK id=75 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X119.241 Y105.929 E.12535 ;PATH_TASK id=76 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.541135 G1 X119.998 Y105.949 E.03137 G1 X120.666 Y105.936 E.02765 ;PATH_TASK id=77 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.514128 G1 X121.256 Y105.936 E.02314 G1 X121.794 Y105.929 E.02108 ;PATH_TASK id=78 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X128.783 Y105.929 E.2656 ;PATH_TASK id=79 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.54608 G1 X129.035 Y105.952 E.01061 ;PATH_TASK id=80 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.592161 G1 X129.288 Y105.975 E.01158 ;PATH_TASK id=81 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.638242 G1 X129.54 Y105.998 E.01255 G1 X130.305 Y105.977 E.03789 ;PATH_TASK id=82 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.596299 G1 X130.888 Y105.952 E.02683 ;PATH_TASK id=83 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.547083 G1 X131.395 Y105.929 E.02128 ;PATH_TASK id=84 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X137.922 Y105.929 E.24805 ;PATH_TASK id=85 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.54384 G1 X138.071 Y105.95 E.00628 ;PATH_TASK id=86 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.587681 G1 X138.22 Y105.972 E.00683 ;PATH_TASK id=87 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.631522 G1 X138.369 Y105.994 E.00738 ;PATH_TASK id=88 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.675363 G1 X138.519 Y106.016 E.00793 ;PATH_TASK id=89 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.719203 G1 X138.668 Y106.038 E.00848 G1 X138.864 Y106.034 E.01101 ;PATH_TASK id=90 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.720116 G1 X139.982 Y106.039 E.063 G1 X140.147 Y106.017 E.00936 ;PATH_TASK id=91 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.676093 G1 X140.312 Y105.995 E.00875 ;PATH_TASK id=92 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.63207 G1 X140.477 Y105.973 E.00814 ;PATH_TASK id=93 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.588046 G1 X140.642 Y105.951 E.00754 ;PATH_TASK id=94 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.544023 G1 X140.806 Y105.929 E.00693 ;PATH_TASK id=95 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X152.571 Y105.929 E.44714 G1 X152.571 Y107.112 E.04497 ;PATH_TASK id=96 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X152.595 Y107.312 E.00765 ;PATH_TASK id=97 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.451992 G1 X152.619 Y107.511 E.00685 ;PATH_TASK id=98 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.403985 G1 X152.643 Y107.711 E.00604 ;PATH_TASK id=99 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.365215 G1 X152.639 Y108.148 E.0117 ;PATH_TASK id=100 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.410137 G1 X152.616 Y108.441 E.00898 ;PATH_TASK id=101 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.455059 G1 X152.594 Y108.735 E.01008 ;PATH_TASK id=17 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X152.588 Y108.86 E.00476 ;PATH_TASK id=102 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X151.748 Y108.725 Z.8 F21000 G1 X151.986 Y108.137 G1 X151.806 Y107.625 G1 X150.927 Y107.335 G1 X150.586 Y107.249 G1 X147.489 Y107.197 G1 X147.469 Y108.374 G1 X147.987 Y108.645 G1 X149.78 Y108.525 G1 X149.943 Y108.832 G1 X150.028 Y108.786 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Outer wall G1 F2700 G1 X149.484 Y109.257 E.02735 G1 X148.87 Y109.568 E.02616 G1 X148.406 Y109.956 E.02299 G1 X148.029 Y110.403 E.02222 G1 X147.77 Y110.906 E.02151 G1 X147.662 Y111.425 E.02013 G1 X147.704 Y111.964 E.02056 G1 X147.918 Y112.494 E.02174 ;PATH_TASK id=103 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X148.266 Y112.906 E.02047 G1 X148.704 Y113.192 E.01989 G1 X149.235 Y113.353 E.02109 G1 X149.808 Y113.387 E.02179 G1 X150.369 Y113.301 E.02159 G1 X150.866 Y113.082 E.02061 G1 X151.261 Y112.747 E.01969 G1 X151.537 Y112.32 E.01935 G1 X151.703 Y111.797 E.02082 G1 X151.766 Y111.337 E.01768 G1 X151.731 Y111.191 E.00569 G1 X151.586 Y111.104 E.00644 ;PATH_TASK id=104 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.503635 G1 X150.43 Y110.966 E.04461 ;PATH_TASK id=105 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.549188 G1 X150.255 Y111.03 E.00783 G1 X150.189 Y111.556 E.02234 ;PATH_TASK id=106 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X150.088 Y111.823 E.01083 G1 X149.922 Y111.94 E.00773 G1 X149.756 Y111.966 E.00637 G1 X149.431 Y111.929 E.01242 G1 X149.274 Y111.803 E.00768 G1 X149.201 Y111.641 E.00674 G1 X149.213 Y111.435 E.00787 G1 X149.416 Y111.073 E.01575 ;PATH_TASK id=107 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.549188 G1 X150.257 Y110.273 E.04887 ;PATH_TASK id=102 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X150.825 Y109.807 E.02794 G1 X151.248 Y109.402 E.02224 G1 X151.594 Y108.955 E.02148 G1 X151.835 Y108.46 E.02094 G1 X151.914 Y108.05 E.01584 G1 X151.924 Y107.716 E.01271 M73 P79 R7 G1 X151.869 Y107.571 E.00588 G1 X151.765 Y107.51 E.00461 G1 X147.928 Y107.44 E.14585 G1 X147.803 Y107.48 E.00499 G1 X147.717 Y107.645 E.00709 G1 X147.708 Y108.715 E.04067 G1 X147.77 Y108.865 E.00615 G1 X147.908 Y108.924 E.00571 G1 X148.684 Y108.889 E.02952 G1 X149.615 Y108.761 E.03574 G1 X149.988 Y108.784 E.01422 ;PATH_TASK id=108 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X149.933 Y108.813 Z.8 F21000 G1 X148.098 Y110.301 G1 X147.695 Y110.774 G1 X147.632 Y110.85 G1 X147.6 Y110.889 G1 X147.57 Y110.93 G1 X147.54 Y110.972 G1 X147.511 Y111.015 G1 X147.484 Y111.059 G1 X147.478 Y111.071 G1 X147.469 Y111.107 G1 X147.466 Y111.12 G1 X147.456 Y111.168 G1 X147.448 Y111.217 G1 X147.441 Y111.267 G1 X147.435 Y111.316 G1 X147.43 Y111.365 G1 X147.426 Y111.415 G1 X147.424 Y111.464 G1 X147.423 Y111.512 G1 X147.422 Y111.538 G1 X147.422 Y111.563 G1 X147.423 Y111.607 G1 X147.424 Y111.652 G1 X147.427 Y111.696 G1 X147.43 Y111.741 G1 X147.434 Y111.786 G1 X147.439 Y111.83 G1 X147.445 Y111.875 G1 X147.453 Y111.919 G1 X147.461 Y111.963 G1 X147.47 Y112.007 G1 X147.599 Y112.571 G1 X147.973 Y112.823 G1 X148.01 Y112.847 G1 X148.047 Y112.871 G1 X148.085 Y112.894 G1 X148.153 Y112.934 G1 X148.183 Y112.951 G1 X148.224 Y112.973 G1 X148.266 Y112.995 G1 X148.308 Y113.015 G1 X148.35 Y113.035 G1 X148.392 Y113.054 G1 X148.434 Y113.071 G1 X148.476 Y113.088 G1 X148.518 Y113.104 G1 X148.56 Y113.119 G1 X148.602 Y113.134 G1 X148.645 Y113.147 G1 X148.687 Y113.16 G1 X148.73 Y113.172 G1 X148.772 Y113.183 G1 X148.815 Y113.194 G1 X148.858 Y113.204 G1 X148.9 Y113.213 G1 X148.943 Y113.221 G1 X148.986 Y113.229 G1 X149.029 Y113.236 G1 X149.073 Y113.243 G1 X149.695 Y113.332 G1 X150.607 Y113.244 G1 X151.142 Y112.975 G1 X151.172 Y112.959 G1 X151.21 Y112.939 G1 X151.249 Y112.915 G1 X151.289 Y112.891 G1 X151.368 Y112.84 G1 X151.378 Y112.832 G1 X151.399 Y112.806 G1 X151.462 Y112.71 G1 X151.737 Y112.225 G1 X151.973 Y111.694 G1 X151.78 Y111.221 G1 X151.68 Y111.217 G1 X151.223 Y111.2 G1 X150.553 Y111.315 G1 X150.068 Y111.888 G1 X150.068 Y111.888 G1 X149.746 Y111.442 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.49345 G1 F2700 G1 X149.69 Y111.442 E.00211 G1 X149.662 Y111.491 E.00211 G1 X149.69 Y111.54 E.00211 G1 X149.746 Y111.54 E.00211 G1 X149.775 Y111.491 E.00211 ;PATH_TASK id=109 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X150.068 Y111.888 Z.8 F21000 G1 X150.553 Y111.315 G1 X151.223 Y111.2 G1 X151.68 Y111.217 G1 X151.78 Y111.221 G1 X151.973 Y111.694 G1 X151.737 Y112.225 G1 X151.462 Y112.71 G1 X151.399 Y112.806 G1 X151.378 Y112.832 G1 X151.368 Y112.84 G1 X151.289 Y112.891 G1 X151.28 Y112.897 G1 X152.814 Y114.314 G1 X153.05 Y114.55 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Outer wall ;WIDTH:0.499999 G1 F2700 G1 X96.95 Y114.55 E2.13215 G1 X96.95 Y105.45 E.34586 G1 X153.05 Y105.45 E2.13215 G1 X153.05 Y114.51 E.34434 ;PATH_TASK id=110 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X152.814 Y114.314 Z.8 F21000 G1 X138.565 Y113.176 G1 X137.7 Y110.162 G1 X137.713 Y109.382 G1 X137.714 Y109.314 G1 X137.473 Y109.31 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Inner wall G1 F2700 G1 X137.463 Y109.799 E.0186 ;PATH_TASK id=111 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X137.558 Y110.073 E.011 G1 X137.743 Y110.278 E.01052 G1 X138.128 Y110.409 E.01544 G1 X138.085 Y112.966 E.09721 G1 X138.213 Y113.378 E.0164 G1 X138.759 Y113.651 E.02318 ;PATH_TASK id=112 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.475622 G1 X139.757 Y113.655 E.03591 ;PATH_TASK id=113 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X140.194 Y113.397 E.01932 G1 X142.691 Y109.969 E.16116 G1 X142.776 Y109.723 E.00991 G1 X142.797 Y108.757 E.03672 G1 X142.725 Y108.439 E.01241 G1 X142.597 Y108.261 E.00832 G1 X142.389 Y108.118 E.00957 G1 X142.123 Y108.06 E.01036 G1 X140.64 Y108.034 E.05638 G1 X140.618 Y107.307 E.02767 G1 X140.411 Y106.992 E.0143 ;PATH_TASK id=114 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.544023 G1 X140.324 Y106.937 E.00429 ;PATH_TASK id=115 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.588046 G1 X140.237 Y106.882 E.00467 ;PATH_TASK id=116 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.63207 G1 X140.15 Y106.826 E.00504 ;PATH_TASK id=117 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.676093 G1 X140.064 Y106.771 E.00542 ;PATH_TASK id=118 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.720116 G1 X139.977 Y106.716 E.0058 G1 X138.737 Y106.7 E.06981 ;PATH_TASK id=119 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.71076 G1 X138.665 Y106.762 E.00531 ;PATH_TASK id=120 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.668608 G1 X138.592 Y106.825 E.00497 ;PATH_TASK id=121 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.626456 G1 X138.52 Y106.887 E.00464 ;PATH_TASK id=122 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.584304 G1 X138.447 Y106.949 E.0043 ;PATH_TASK id=123 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.542152 G1 X138.375 Y107.012 E.00397 ;PATH_TASK id=110 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X138.182 Y107.422 E.01723 G1 X138.169 Y107.995 E.02181 G1 X137.823 Y108.085 E.01358 G1 X137.555 Y108.372 E.01494 G1 X137.487 Y108.595 E.00886 G1 X137.474 Y109.27 E.02566 ;PATH_TASK id=124 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X137.943 Y109.723 F21000 ;TYPE:Outer wall G1 F2700 G1 X137.974 Y109.836 E.00446 G1 X138.147 Y109.934 E.00752 G1 X138.615 Y109.942 E.0178 G1 X138.563 Y112.974 E.11527 G1 X138.602 Y113.098 E.00495 G1 X138.767 Y113.185 E.00706 G1 X139.637 Y113.2 E.03308 G1 X139.808 Y113.115 E.00725 G1 X142.3 Y109.7 E.16065 G1 X142.319 Y108.749 E.03618 G1 X142.258 Y108.599 E.00614 G1 X142.115 Y108.538 E.00591 G1 X140.153 Y108.505 E.07457 G1 X140.17 Y107.515 E.03763 G1 X140.098 Y107.355 E.00668 G1 X139.967 Y107.304 E.00536 G1 X138.867 Y107.286 E.0418 G1 X138.716 Y107.347 E.0062 G1 X138.659 Y107.458 E.00474 G1 X138.64 Y108.479 E.0388 G1 X138.064 Y108.499 E.0219 G1 X137.962 Y108.653 E.00701 G1 X137.944 Y109.683 E.03915 ;PATH_TASK id=125 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X137.708 Y109.679 Z.8 F21000 G1 X131.611 Y112.796 G1 X131.564 Y112.82 G1 X131.517 Y112.842 G1 X131.469 Y112.863 G1 X131.422 Y112.884 G1 X131.374 Y112.903 G1 X131.327 Y112.922 G1 X131.279 Y112.939 G1 X130.225 Y113.32 G1 X129.163 Y112.972 G1 X129.127 Y112.959 G1 X129.09 Y112.946 G1 X129.054 Y112.933 G1 X129.018 Y112.918 G1 X128.982 Y112.903 G1 X128.946 Y112.888 G1 X128.91 Y112.872 G1 X128.874 Y112.855 G1 X128.838 Y112.837 G1 X128.803 Y112.819 G1 X128.767 Y112.801 G1 X128.707 Y112.767 G1 X128.699 Y112.761 G1 X128.44 Y112.553 G1 X128.418 Y112.528 G1 X128.163 Y112.138 G1 X128.063 Y111.532 G1 X128.057 Y111.491 G1 X131.319 Y110.667 G1 X131.115 Y110.667 G1 X131.002 Y110.868 G1 Z.2 F720 G1 E.7 F1500 ;WIDTH:0.555536 G1 F2700 G1 X130.932 Y111.105 E.01051 G1 X130.793 Y111.411 E.01432 G1 X130.487 Y111.623 E.01588 ;PATH_TASK id=126 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.562912 G1 X130.212 Y111.677 E.01211 G1 X129.934 Y111.644 E.01207 ;PATH_TASK id=127 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.559337 G1 X129.693 Y111.492 E.01226 ;PATH_TASK id=128 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.571473 G1 X129.614 Y111.184 E.01395 ;PATH_TASK id=129 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.593912 G1 X129.49 Y111.007 E.00991 ;PATH_TASK id=130 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X129.712 Y111.068 E.01054 ;PATH_TASK id=131 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.571473 G1 X130.289 Y111.112 E.02541 ;PATH_TASK id=125 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.555536 G1 X130.808 Y110.977 E.02288 G1 X130.967 Y110.888 E.00776 ;PATH_TASK id=132 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X130.845 Y110.656 Z.8 F21000 G1 X129.375 Y111.446 G1 X129.341 Y111.302 G1 X128.729 Y111.339 G1 X128.503 Y111.39 G1 X128.35 Y110.711 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.499999 G1 F2700 G1 X128.08 Y110.904 E.01261 G1 X127.905 Y111.189 E.01271 G1 X127.875 Y111.436 E.00945 G1 X127.962 Y112.018 E.02239 G1 X128.059 Y112.277 E.01051 G1 X128.331 Y112.713 E.01954 G1 X128.485 Y112.886 E.00879 G1 X129.025 Y113.274 E.02526 ;PATH_TASK id=133 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.531924 G1 X129.339 Y113.397 E.01372 ;PATH_TASK id=134 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.563849 G1 X129.653 Y113.52 E.01462 G1 X130.332 Y113.55 E.02943 ;PATH_TASK id=135 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.582863 G1 X130.838 Y113.493 E.02288 G1 X130.929 Y113.453 E.00445 ;PATH_TASK id=136 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.556286 G1 X131.02 Y113.412 E.00423 ;PATH_TASK id=137 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.529708 G1 X131.626 Y113.089 E.02779 ;PATH_TASK id=138 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X132.125 Y112.624 E.02594 G1 X132.493 Y112.035 E.02638 G1 X132.709 Y111.437 E.02416 G1 X132.838 Y110.78 E.02545 G1 X132.889 Y110.159 E.0237 G1 X132.886 Y109.508 E.02475 G1 X132.812 Y108.86 E.02476 G1 X132.655 Y108.267 E.02334 G1 X132.33 Y107.637 E.02695 G1 X131.865 Y107.14 E.02585 G1 X131.268 Y106.78 E.02651 ;PATH_TASK id=139 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.536605 G1 X131.058 Y106.703 E.00917 ;PATH_TASK id=140 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.573211 G1 X130.849 Y106.626 E.00985 ;PATH_TASK id=141 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.609817 G1 X130.639 Y106.55 E.01053 G1 X130.126 Y106.533 E.02417 ;PATH_TASK id=142 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.635407 G1 X129.618 Y106.586 E.02521 G1 X129.523 Y106.637 E.00527 ;PATH_TASK id=143 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.589553 G1 X129.429 Y106.688 E.00486 ;PATH_TASK id=144 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.543698 G1 X128.827 Y107.017 E.02858 ;PATH_TASK id=145 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X128.336 Y107.484 E.02574 G1 X127.981 Y108.087 E.0266 G1 X127.791 Y108.725 E.02531 G1 X127.762 Y109.419 E.0264 ;PATH_TASK id=132 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X127.857 Y109.937 E.02003 G1 X128.085 Y110.406 E.01979 G1 X128.323 Y110.68 E.01383 ;PATH_TASK id=146 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X129.446 Y110.989 F21000 ;TYPE:Outer wall ;WIDTH:0.598088 G1 F2700 G1 X129.327 Y111.01 E.00557 ;PATH_TASK id=147 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.567618 G1 X129.208 Y111.031 E.00527 ;PATH_TASK id=148 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.537147 G1 X128.669 Y111.086 E.02226 ;PATH_TASK id=149 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X128.399 Y111.263 E.01228 G1 X128.355 Y111.425 E.00639 G1 X128.464 Y112.024 E.02312 G1 X128.783 Y112.512 E.02216 G1 X129.195 Y112.827 E.01972 G1 X129.699 Y113.011 E.02038 G1 X130.257 Y113.055 E.02128 G1 X130.815 Y112.963 E.0215 G1 X131.312 Y112.728 E.02089 G1 X131.725 Y112.36 E.02102 G1 X132.024 Y111.908 E.0206 G1 X132.231 Y111.374 E.02174 G1 X132.357 Y110.763 E.02372 G1 X132.41 Y110.165 E.02281 G1 X132.411 Y109.575 E.02244 G1 X132.358 Y109.022 E.0211 G1 X132.223 Y108.47 E.02159 G1 X131.969 Y107.951 E.02197 G1 X131.602 Y107.54 E.02095 G1 X131.128 Y107.238 E.02135 G1 X130.643 Y107.09 E.01927 G1 X130.2 Y107.056 E.0169 G1 X129.636 Y107.143 E.02167 G1 X129.142 Y107.377 E.02078 G1 X128.741 Y107.74 E.02055 G1 X128.437 Y108.233 E.02202 G1 X128.269 Y108.764 E.02119 G1 X128.231 Y109.303 E.02054 ;PATH_TASK id=150 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X128.311 Y109.779 E.01833 G1 X128.51 Y110.186 E.01723 G1 X128.867 Y110.532 E.01888 ;PATH_TASK id=151 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.549044 G1 X129.156 Y110.76 E.01551 ;PATH_TASK id=146 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.598088 G1 X129.414 Y110.964 E.01517 ;PATH_TASK id=152 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X129.541 Y110.699 Z.8 F21000 G1 X122.565 Y110.272 G1 X122.655 Y110.255 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.499999 G1 F2700 G1 X122.872 Y109.925 E.015 G1 X123.072 Y109.588 E.01488 G1 X123.172 Y108.994 E.02292 G1 X123.153 Y108.585 E.01554 G1 X123.058 Y108.089 E.0192 G1 X122.754 Y107.478 E.02593 G1 X122.296 Y106.984 E.02563 G1 X121.693 Y106.623 E.02671 ;PATH_TASK id=153 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.528839 G1 X121.035 Y106.428 E.02774 G1 X120.524 Y106.407 E.02066 ;PATH_TASK id=154 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.541135 G1 X120.024 Y106.446 E.02077 G1 X119.854 Y106.494 E.00733 ;PATH_TASK id=155 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.52541 G1 X119.203 Y106.779 E.0285 ;PATH_TASK id=156 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X118.669 Y107.216 E.02622 G1 X118.284 Y107.769 E.02564 G1 X118.111 Y108.243 E.01913 G1 X118.065 Y108.527 E.01097 ;PATH_TASK id=157 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X118.058 Y109.144 E.02343 G1 X118.248 Y109.818 E.02663 G1 X118.534 Y110.169 E.01718 G1 X118.326 Y110.536 E.01606 G1 X118.231 Y110.871 E.01322 G1 X118.231 Y111.52 E.02465 G1 X118.408 Y112.067 E.02186 G1 X118.506 Y112.254 E.00802 G1 X118.902 Y112.741 E.02386 G1 X119.463 Y113.126 E.02587 ;PATH_TASK id=158 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.54749 G1 X119.676 Y113.218 E.00973 ;PATH_TASK id=159 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.594981 G1 X119.889 Y113.31 E.01064 ;PATH_TASK id=160 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.642472 G1 X120.102 Y113.402 E.01156 G1 X120.783 Y113.428 E.03399 ;PATH_TASK id=161 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.666424 G1 X121.291 Y113.368 E.0265 G1 X121.351 Y113.329 E.00371 ;PATH_TASK id=162 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.626233 G1 X121.411 Y113.29 E.00347 ;PATH_TASK id=163 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.586042 G1 X121.471 Y113.251 E.00323 ;PATH_TASK id=164 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.545851 G1 X122.042 Y112.926 E.02749 ;PATH_TASK id=152 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X122.529 Y112.439 E.02618 G1 X122.835 Y111.834 E.02577 G1 X122.925 Y111.351 E.01867 G1 X122.905 Y110.822 E.02013 G1 X122.671 Y110.291 E.02203 ;PATH_TASK id=165 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X122.573 Y110.31 F21000 G1 X122.557 Y110.232 G1 X122.493 Y110.231 G1 X122.485 Y110.21 G1 X121.708 Y110.174 ;TYPE:Outer wall ;WIDTH:0.355244 G1 F2700 G1 X121.953 Y110.008 E.00769 ;PATH_TASK id=166 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.396075 G1 X122.064 Y110.02 E.00326 ;PATH_TASK id=167 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.436906 G1 X122.174 Y110.032 E.00364 ;PATH_TASK id=168 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.468453 G1 X122.212 Y110.016 E.00147 ;PATH_TASK id=169 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X122.25 Y109.999 E.00158 G1 X122.553 Y109.554 E.02044 G1 X122.626 Y109.382 E.00711 G1 X122.703 Y108.838 E.0209 G1 X122.622 Y108.284 E.02125 G1 X122.391 Y107.789 E.02078 G1 X122.034 Y107.384 E.02052 G1 X121.556 Y107.081 E.02148 G1 X121.041 Y106.928 E.02045 G1 X120.611 Y106.89 E.01639 G1 X120.061 Y106.944 E.021 G1 X119.544 Y107.133 E.02092 G1 X119.092 Y107.463 E.02126 G1 X118.756 Y107.895 E.02082 G1 X118.561 Y108.406 E.02077 G1 X118.517 Y108.995 E.02245 ;PATH_TASK id=170 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X118.649 Y109.54 E.02134 G1 X118.802 Y109.724 E.00907 ;PATH_TASK id=171 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.547603 G1 X119.049 Y110.09 E.01854 ;PATH_TASK id=172 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.572254 G1 X119.154 Y110.141 E.00515 G1 X119.052 Y110.198 E.00515 ;PATH_TASK id=173 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.547603 G1 X119.002 Y110.307 E.00503 ;PATH_TASK id=174 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X118.71 Y110.88 E.02443 G1 X118.703 Y111.442 E.02138 G1 X118.876 Y111.947 E.02026 G1 X119.191 Y112.359 E.01973 G1 X119.624 Y112.675 E.02036 G1 X120.145 Y112.854 E.02095 G1 X120.668 Y112.894 E.01992 G1 X121.208 Y112.813 E.02078 G1 X121.668 Y112.607 E.01916 G1 X122.074 Y112.251 E.02052 G1 X122.341 Y111.806 E.0197 G1 X122.446 Y111.325 E.01873 G1 X122.443 Y110.952 E.01417 G1 X122.215 Y110.443 E.02118 G1 X122.177 Y110.411 E.00188 ;PATH_TASK id=175 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.468453 G1 X122.139 Y110.379 E.00175 ;PATH_TASK id=176 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.436906 G1 X122.032 Y110.387 E.00352 ;PATH_TASK id=177 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.396075 G1 X121.925 Y110.394 E.00316 ;PATH_TASK id=165 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.355244 G1 X121.736 Y110.202 E.00699 ;PATH_TASK id=178 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X122.485 Y110.21 Z.8 F21000 G1 X122.693 Y110.018 G1 X122.973 Y109.453 G1 X123.237 Y108.8 G1 X122.805 Y107.882 G1 X122.662 Y107.662 G1 X122.492 Y107.457 G1 X122.224 Y107.235 G1 X122.213 Y107.228 G1 X122.172 Y107.206 G1 X122.131 Y107.185 G1 X120.897 Y106.549 G1 X114.247 Y106.844 G1 X113.821 Y106.988 G1 X113.85 Y107.355 G1 X110.895 Y106.773 G1 X110.894 Y106.287 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.450432 G1 F2700 G1 X110.825 Y106.284 E.00233 ;PATH_TASK id=179 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.459315 G1 X110.482 Y106.328 E.01196 ;PATH_TASK id=180 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.485074 G1 X110.14 Y106.372 E.0127 ;PATH_TASK id=181 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X109.55 Y106.656 E.02486 G1 X109.054 Y107.125 E.02596 G1 X108.778 Y107.55 E.01926 G1 X108.672 Y107.793 E.01009 G1 X108.484 Y108.346 E.02218 G1 X108.383 Y108.928 E.02244 G1 X108.335 Y109.652 E.02759 G1 X108.341 Y110.231 E.02199 G1 X108.417 Y110.922 E.02645 ;PATH_TASK id=182 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X108.588 Y111.544 E.0245 G1 X108.827 Y112.058 E.02153 G1 X109.176 Y112.513 E.0218 G1 X109.694 Y112.91 E.02478 ;PATH_TASK id=183 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.549109 G1 X110.316 Y113.169 E.02837 ;PATH_TASK id=184 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.591285 G1 X110.362 Y113.199 E.0025 ;PATH_TASK id=185 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.633461 G1 X110.408 Y113.229 E.00269 ;PATH_TASK id=186 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.675637 G1 X110.454 Y113.258 E.00288 ;PATH_TASK id=187 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.717812 G1 X110.5 Y113.288 E.00307 G1 X111.007 Y113.305 E.02849 ;PATH_TASK id=188 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.706336 G1 X111.209 Y113.28 E.01123 ;PATH_TASK id=189 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.689227 G1 X111.372 Y113.212 E.00948 ;PATH_TASK id=190 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.64192 G1 X111.535 Y113.144 E.00878 ;PATH_TASK id=191 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.594613 G1 X111.698 Y113.077 E.00809 ;PATH_TASK id=192 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.547306 G1 X111.861 Y113.009 E.0074 ;PATH_TASK id=193 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X112.41 Y112.664 E.02466 G1 X112.856 Y112.159 E.0256 G1 X113.135 Y111.628 E.02278 G1 X113.121 Y112.451 E.03129 G1 X113.163 Y112.815 E.01391 G1 X113.241 Y112.964 E.00639 ;PATH_TASK id=194 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.544456 G1 X113.378 Y113.06 E.007 ;PATH_TASK id=195 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.588913 G1 X113.516 Y113.156 E.00762 ;PATH_TASK id=196 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.63337 G1 X113.653 Y113.252 E.00824 ;PATH_TASK id=197 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.677826 G1 X113.791 Y113.348 E.00886 ;PATH_TASK id=198 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.679297 G1 X114.723 Y113.35 E.04929 G1 X114.832 Y113.254 E.00774 ;PATH_TASK id=199 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.634473 G1 X114.942 Y113.157 E.00719 ;PATH_TASK id=200 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.589648 G1 X115.052 Y113.06 E.00665 ;PATH_TASK id=201 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.544824 G1 X115.161 Y112.963 E.0061 ;PATH_TASK id=202 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X115.353 Y112.673 E.01322 G1 X115.624 Y112.383 E.01509 G1 X115.988 Y112.123 E.01701 G1 X116.457 Y111.88 E.02008 G1 X116.667 Y111.72 E.01003 G1 X116.815 Y111.446 E.01181 G1 X116.834 Y110.866 E.02205 G1 X116.803 Y110.016 E.03233 G1 X116.618 Y109.704 E.01379 G1 X116.403 Y109.563 E.00979 G1 X115.919 Y109.547 E.01838 G1 X115.545 Y109.726 E.01575 G1 X115.616 Y109.32 E.01566 G1 X115.659 Y108.393 E.03525 M73 P80 R7 G1 X115.683 Y107.098 E.04923 G1 X115.554 Y106.686 E.0164 ;PATH_TASK id=203 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.507682 G1 X115.009 Y106.397 E.02385 G1 X113.791 Y106.382 E.04708 ;PATH_TASK id=204 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X113.309 Y106.717 E.02234 G1 X113.212 Y107.056 E.01338 G1 X113.198 Y107.903 E.03219 G1 X113.17 Y107.828 E.00304 G1 X112.829 Y107.199 E.0272 G1 X112.348 Y106.707 E.02615 G1 X111.775 Y106.397 E.02476 G1 X111.309 Y106.305 E.01804 ;PATH_TASK id=178 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.450432 G1 X110.934 Y106.289 E.01273 ;PATH_TASK id=205 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X110.88 Y106.726 F21000 ;TYPE:Outer wall ;WIDTH:0.499999 G1 F2700 G1 X110.328 Y106.804 E.02122 G1 X109.866 Y107.015 E.0193 G1 X109.456 Y107.386 E.021 G1 X109.159 Y107.853 E.02106 G1 X108.965 Y108.393 E.02179 G1 X108.854 Y109.009 E.0238 G1 X108.813 Y109.681 E.02556 G1 X108.82 Y110.224 E.02066 G1 X108.878 Y110.789 E.02157 ;PATH_TASK id=206 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X109.024 Y111.345 E.02184 G1 X109.259 Y111.845 E.02102 G1 X109.596 Y112.258 E.02026 G1 X110.022 Y112.545 E.01952 G1 X110.526 Y112.701 E.02007 G1 X111.087 Y112.72 E.02132 G1 X111.625 Y112.593 E.02102 G1 X112.062 Y112.335 E.01927 G1 X112.435 Y111.93 E.02095 G1 X112.681 Y111.478 E.01954 ;PATH_TASK id=207 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.543753 G1 X112.765 Y111.277 E.00908 ;PATH_TASK id=208 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.587506 G1 X112.848 Y111.075 E.00987 ;PATH_TASK id=209 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.631259 G1 X112.931 Y110.874 E.01067 G1 X112.993 Y110.304 E.02803 ;PATH_TASK id=210 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.596409 G1 X113.016 Y109.762 E.02496 ;PATH_TASK id=211 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.599551 G1 X113.009 Y109.162 E.0278 ;PATH_TASK id=212 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.609389 G1 X112.939 Y108.564 E.02832 G1 X112.873 Y108.389 E.00883 ;PATH_TASK id=213 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.572926 G1 X112.807 Y108.214 E.00826 ;PATH_TASK id=214 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.536463 G1 X112.74 Y108.039 E.00769 ;PATH_TASK id=205 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X112.481 Y107.527 E.02178 G1 X112.144 Y107.15 E.01922 G1 X111.713 Y106.884 E.01926 G1 X111.198 Y106.745 E.02028 G1 X110.92 Y106.729 E.01056 ;PATH_TASK id=215 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X110.92 Y106.773 Z.8 F21000 G1 X110.943 Y106.773 G1 X110.988 Y106.774 G1 X115.236 Y106.856 G1 X115.425 Y107.989 G1 X115.412 Y108.761 G1 X114.694 Y110.622 G1 X114.849 Y110.811 G1 X114.943 Y110.735 G1 Z.2 F720 G1 E.7 F1500 G1 F2700 G1 X114.95 Y110.303 E.01642 G1 X115.135 Y109.328 E.03771 G1 X115.181 Y108.372 E.03639 G1 X115.202 Y107.245 E.04281 G1 X115.166 Y106.966 E.01072 G1 X115.001 Y106.879 E.00706 G1 X113.901 Y106.861 E.0418 G1 X113.72 Y106.962 E.0079 G1 X113.691 Y107.064 E.00404 G1 X113.676 Y107.966 E.03427 ;PATH_TASK id=216 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.54603 G1 X113.649 Y108.166 E.00844 ;PATH_TASK id=217 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.592061 G1 X113.623 Y108.366 E.00921 ;PATH_TASK id=218 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.638092 G1 X113.596 Y108.566 E.00998 G1 X113.606 Y109.186 E.03068 ;PATH_TASK id=219 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.597178 G1 X113.602 Y109.751 E.02608 ;PATH_TASK id=220 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.596409 G1 X113.587 Y110.35 E.02758 ;PATH_TASK id=221 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.61387 G1 X113.567 Y111.012 E.03142 G1 X113.582 Y111.249 E.01128 ;PATH_TASK id=222 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.575913 G1 X113.597 Y111.487 E.01053 ;PATH_TASK id=223 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.537956 G1 X113.612 Y111.724 E.00978 ;PATH_TASK id=215 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X113.61 Y112.646 E.03506 G1 X113.801 Y112.78 E.00885 G1 X114.585 Y112.794 E.02982 G1 X114.762 Y112.7 E.00759 G1 X115.042 Y112.275 E.01936 G1 X115.383 Y111.953 E.01785 G1 X115.806 Y111.669 E.01934 G1 X116.281 Y111.429 E.02022 G1 X116.358 Y111.295 E.0059 G1 X116.345 Y110.162 E.04306 G1 X116.262 Y110.028 E.00598 G1 X116.074 Y110 E.00722 G1 X115.595 Y110.235 E.0203 G1 X115.314 Y110.406 E.01249 G1 X115.274 Y110.543 E.00542 G1 X114.978 Y110.714 E.01301 ;PATH_TASK id=224 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X114.853 Y110.816 Z.8 F21000 G1 X115.998 Y110.41 G1 X116.608 Y110.628 G1 X116.592 Y111.553 G1 X114.823 Y112.992 G1 X110.836 Y112.954 G1 X110.774 Y112.953 G1 X110.717 Y112.951 G1 X110.665 Y112.949 G1 X110.613 Y112.946 G1 X110.562 Y112.942 G1 X110.511 Y112.937 G1 X110.459 Y112.931 G1 X110.409 Y112.921 G1 X110.359 Y112.91 G1 X110.309 Y112.899 G1 X110.259 Y112.886 G1 X110.209 Y112.871 G1 X110.161 Y112.856 G1 X110.117 Y112.841 G1 X110.078 Y112.827 G1 X110.039 Y112.812 G1 X110 Y112.796 G1 X109.962 Y112.779 G1 X109.925 Y112.762 G1 X109.887 Y112.743 G1 X109.852 Y112.725 G1 X109.825 Y112.71 G1 X109.803 Y112.698 G1 X109.773 Y112.681 G1 X109.734 Y112.658 G1 X109.7 Y112.636 G1 X109.666 Y112.614 G1 X109.633 Y112.592 G1 X109.6 Y112.568 G1 X109.568 Y112.544 G1 X109.536 Y112.519 G1 X105.197 Y109.016 G1 X105.703 Y108.595 G1 X105.716 Y107.824 G1 X105.443 Y106.772 G1 X104.532 Y107.039 G1 X104.368 Y107.088 G1 X104.063 Y108.986 G1 X104.06 Y109.443 G1 X102.479 Y108.738 G1 X102.767 Y109.293 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.652024 G1 F2700 G1 X103.099 Y108.976 E.02325 G1 X103.399 Y108.6 E.02435 G1 X103.374 Y110.021 E.07199 G1 X103.119 Y109.728 E.01971 G1 X102.367 Y109.637 E.03835 G1 X102.644 Y109.41 E.01817 G1 X102.738 Y109.32 E.00657 ;PATH_TASK id=225 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X102.445 Y108.756 Z.8 F21000 G1 X102.506 Y108.725 G1 X102.515 Y108.709 G1 X102.558 Y108.625 G1 X102.599 Y108.544 G1 X102.629 Y108.481 G1 X102.683 Y108.367 G1 X102.7 Y108.331 G1 X102.894 Y107.888 G1 X102.999 Y107.554 G1 X102.997 Y107.064 G1 X102.599 Y106.745 G1 X101.771 Y106.738 G1 X101.513 Y106.736 G1 X101.517 Y106.225 G1 Z.2 F720 G1 E.7 F1500 ;WIDTH:0.407155 G1 F2700 G1 X99.391 Y106.198 E.06439 ;PATH_TASK id=226 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.416663 G1 X99.23 Y106.244 E.0052 ;PATH_TASK id=227 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.458331 G1 X99.069 Y106.289 E.00578 ;PATH_TASK id=228 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X98.908 Y106.334 E.00635 G1 X98.717 Y106.696 E.01557 G1 X98.706 Y106.815 E.00453 G1 X98.695 Y107.991 E.04468 G1 X98.951 Y108.425 E.01914 G1 X99.358 Y108.576 E.01653 G1 X99.808 Y108.559 E.01712 G1 X99.48 Y108.848 E.01664 G1 X99.056 Y109.384 E.02595 G1 X98.758 Y110.016 E.02655 G1 X98.652 Y110.674 E.02533 ;PATH_TASK id=229 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X98.741 Y111.379 E.02701 G1 X99.015 Y111.971 E.0248 G1 X99.465 Y112.477 E.02573 G1 X100.027 Y112.822 E.02507 G1 X100.67 Y113.005 E.02542 G1 X101.341 Y113.035 E.02551 G1 X102.015 Y112.918 E.02601 G1 X102.636 Y112.627 E.02607 G1 X103.125 Y112.187 E.02498 G1 X103.422 Y111.718 E.0211 G1 X103.42 Y111.826 E.00412 G1 X103.416 Y112.503 E.0257 G1 X103.562 Y112.839 E.01394 G1 X104.084 Y113.094 E.02206 G1 X104.868 Y113.107 E.02982 G1 X105.22 Y113.017 E.01379 G1 X105.453 Y112.798 E.01214 G1 X105.637 Y112.517 E.01277 G1 X105.974 Y112.163 E.01859 G1 X106.406 Y111.885 E.0195 G1 X106.903 Y111.61 E.02161 G1 X107.085 Y111.346 E.01218 G1 X107.128 Y110.893 E.0173 G1 X107.097 Y109.864 E.03912 G1 X106.921 Y109.55 E.0137 G1 X106.708 Y109.403 E.00981 G1 X106.211 Y109.382 E.01891 G1 X105.837 Y109.561 E.01575 G1 X105.908 Y109.155 E.01566 G1 X105.952 Y108.186 E.03686 G1 X105.974 Y106.933 E.04763 G1 X105.846 Y106.521 E.0164 G1 X105.573 Y106.397 E.01139 ;PATH_TASK id=230 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.462535 G1 X105.3 Y106.273 E.01046 ;PATH_TASK id=231 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.42507 G1 X104.2 Y106.259 E.03495 ;PATH_TASK id=232 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.451859 G1 X104.01 Y106.296 E.00658 ;PATH_TASK id=233 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.488003 G1 X103.82 Y106.332 E.00716 G1 X103.694 Y106.448 E.00634 G1 X103.572 Y106.328 E.00634 G1 X103.383 Y106.287 E.00715 ;PATH_TASK id=234 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.447579 G1 X103.194 Y106.246 E.0065 ;PATH_TASK id=225 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.407155 G1 X101.557 Y106.226 E.04959 ;PATH_TASK id=235 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X101.553 Y106.736 Z.8 F21000 G1 X99.288 Y106.714 G1 X99.027 Y107.549 G1 X99.454 Y107.819 G1 X101.516 Y107.69 G1 X101.641 Y107.829 G1 X101.495 Y107.96 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Outer wall ;WIDTH:0.499999 G1 F2700 G1 X100.95 Y108.431 E.02735 G1 X100.337 Y108.742 E.02616 G1 X99.847 Y109.156 E.02437 G1 X99.481 Y109.603 E.02196 G1 X99.227 Y110.112 E.0216 G1 X99.129 Y110.634 E.02021 ;PATH_TASK id=236 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X99.185 Y111.199 E.02157 G1 X99.385 Y111.668 E.0194 G1 X99.733 Y112.08 E.02047 G1 X100.171 Y112.366 E.01989 G1 X100.702 Y112.527 E.02109 G1 X101.274 Y112.561 E.02178 G1 X101.83 Y112.476 E.02137 G1 X102.332 Y112.257 E.02084 G1 X102.727 Y111.921 E.01969 G1 X103.004 Y111.494 E.01935 ;PATH_TASK id=237 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.533613 G1 X103.075 Y111.325 E.00748 ;PATH_TASK id=238 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.567227 G1 X103.146 Y111.156 E.008 ;PATH_TASK id=239 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.60084 G1 X103.218 Y110.987 E.00851 G1 X103.28 Y110.517 E.02199 ;PATH_TASK id=240 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.594803 G1 X103.166 Y110.398 E.00757 ;PATH_TASK id=241 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.547401 G1 X103.053 Y110.278 E.00692 ;PATH_TASK id=242 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.503638 G1 X101.896 Y110.14 E.04461 ;PATH_TASK id=243 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.549193 G1 X101.722 Y110.204 E.00782 G1 X101.656 Y110.731 E.02235 ;PATH_TASK id=244 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X101.555 Y110.997 E.01083 G1 X101.39 Y111.114 E.00766 G1 X101.22 Y111.141 E.00656 G1 X100.907 Y111.108 E.01193 G1 X100.752 Y110.992 E.00736 G1 X100.671 Y110.832 E.00683 G1 X100.673 Y110.633 E.00757 G1 X100.845 Y110.304 E.01409 ;PATH_TASK id=245 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.549193 G1 X101.326 Y109.826 E.02857 G1 X101.724 Y109.447 E.02311 ;PATH_TASK id=246 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X102.292 Y108.981 E.02794 G1 X102.735 Y108.553 E.02341 G1 X103.083 Y108.092 E.02195 ;PATH_TASK id=247 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.538807 G1 X103.22 Y107.839 E.01186 ;PATH_TASK id=248 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.577614 G1 X103.357 Y107.587 E.01278 G1 X103.414 Y106.891 E.03103 ;PATH_TASK id=249 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.545793 G1 X103.353 Y106.764 E.00589 ;PATH_TASK id=250 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.502917 G1 X103.187 Y106.678 E.00713 ;PATH_TASK id=235 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X99.395 Y106.614 E.14416 G1 X99.245 Y106.674 E.00612 G1 X99.188 Y106.784 E.0047 G1 X99.175 Y107.889 E.04203 G1 X99.236 Y108.038 E.00611 G1 X99.375 Y108.098 E.00576 G1 X100.15 Y108.063 E.02952 G1 X101.082 Y107.935 E.03574 G1 X101.455 Y107.958 E.01422 ;PATH_TASK id=251 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X101.622 Y107.808 Z.8 F21000 G1 X99.454 Y107.819 G1 X99.027 Y107.549 G1 X99.288 Y106.714 G1 X102.599 Y106.745 G1 X102.997 Y107.064 G1 X102.999 Y107.554 G1 X102.894 Y107.888 G1 X102.7 Y108.331 G1 X102.683 Y108.367 G1 X102.629 Y108.481 G1 X102.599 Y108.544 G1 X102.558 Y108.625 G1 X102.515 Y108.709 G1 X101.287 Y110.905 G1 X101.299 Y110.902 G1 X101.212 Y110.614 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.497106 G1 F2700 G1 X101.155 Y110.614 E.00214 G1 X101.127 Y110.663 E.00214 G1 X101.155 Y110.712 E.00214 G1 X101.212 Y110.712 E.00214 G1 X101.24 Y110.663 E.00214 ;PATH_TASK id=252 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X101.302 Y110.901 Z.8 F21000 G1 X102.019 Y110.489 G1 X104.241 Y110.593 G1 X104.05 Y112.452 G1 X104.661 Y112.861 G1 X105.139 Y112.869 G1 X106.884 Y111.387 G1 X106.899 Y110.463 G1 X106.289 Y110.245 G1 X105.552 Y110.666 G1 X105.285 Y110.492 G1 X105.234 Y110.569 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Outer wall ;WIDTH:0.499999 G1 F2700 G1 X105.241 Y110.137 E.01642 G1 X105.426 Y109.163 E.03771 G1 X105.474 Y108.164 E.03799 G1 X105.496 Y106.925 E.04711 G1 X105.457 Y106.8 E.00495 G1 X105.292 Y106.714 E.00706 G1 X104.193 Y106.695 E.0418 G1 X104.077 Y106.729 E.00459 ;PATH_TASK id=253 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.545787 G1 X103.959 Y106.899 E.00864 ;PATH_TASK id=254 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.549773 G1 X103.951 Y107.28 E.01609 ;PATH_TASK id=255 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.550998 G1 X103.942 Y107.79 E.02153 G1 X103.95 Y108.044 E.01074 ;PATH_TASK id=256 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.525499 G1 X103.958 Y108.298 E.0102 ;PATH_TASK id=257 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X103.938 Y109.506 E.04592 ;PATH_TASK id=258 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.547401 G1 X103.905 Y110.033 E.02216 ;PATH_TASK id=259 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.594803 G1 X103.872 Y110.561 E.02424 ;PATH_TASK id=260 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.60084 G1 X103.86 Y111.092 E.02465 G1 X103.874 Y111.275 E.00851 ;PATH_TASK id=261 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.567227 G1 X103.888 Y111.458 E.008 ;PATH_TASK id=262 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.533613 G1 X103.901 Y111.641 E.00748 ;PATH_TASK id=252 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.499999 G1 X103.891 Y112.286 E.02452 G1 X103.92 Y112.518 E.00889 G1 X104.092 Y112.615 E.00752 G1 X104.916 Y112.625 E.03131 G1 X105.053 Y112.535 E.00624 G1 X105.333 Y112.11 E.01936 G1 X105.675 Y111.787 E.01785 G1 X106.097 Y111.504 E.01934 G1 X106.583 Y111.255 E.02076 G1 X106.652 Y111.098 E.00648 G1 X106.639 Y110.029 E.04065 G1 X106.563 Y109.87 E.0067 G1 X106.365 Y109.835 E.00761 G1 X105.886 Y110.07 E.0203 G1 X105.605 Y110.241 E.01249 G1 X105.565 Y110.378 E.00542 G1 X105.269 Y110.549 E.01301 ;PATH_TASK id=263 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X105.3 Y110.502 Z.8 F21000 G1 X109.535 Y107.108 G1 X109.29 Y106.702 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Bottom surface ;WIDTH:0.514393 G1 F6000 G1 X108.86 Y106.271 E.02385 G1 X108.193 Y106.271 E.02614 G1 X108.809 Y106.888 E.03417 G1 X108.771 Y106.932 E.00229 G1 X108.541 Y107.286 E.01656 G1 X107.526 Y106.271 E.05627 G1 X106.859 Y106.271 E.02614 G1 X108.327 Y107.739 E.08136 G1 X108.19 Y108.119 E.01585 G1 X108.159 Y108.238 E.00479 G1 X106.193 Y106.271 E.10901 G1 X106.115 Y106.271 E.00306 G1 X106.317 Y106.921 E.02666 G1 X106.315 Y107.061 E.00549 G1 X108.057 Y108.802 E.09657 G2 X108.032 Y108.98 I1.576 J.309 E.00704 G1 X108.006 Y109.418 E.01721 G1 X106.304 Y107.716 E.09437 G1 X106.296 Y108.161 E.01747 G1 X106.287 Y108.366 E.00802 G1 X107.996 Y110.075 E.09477 G1 X107.998 Y110.238 E.00636 G1 X108.003 Y110.324 E.00338 G1 X108.052 Y110.798 E.01869 G1 X107.463 Y110.209 E.03267 G1 X107.461 Y110.011 E.00776 G1 X107.431 Y109.785 E.00894 G1 X107.406 Y109.697 E.00357 G1 X107.172 Y109.316 E.01754 G1 X107.076 Y109.229 E.00508 G1 X106.834 Y109.081 E.01112 G1 X106.313 Y109.059 E.02046 G1 X106.061 Y108.807 E.01395 ;PATH_TASK id=264 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z.8 F720 G1 X107.262 Y110.675 Z.8 F21000 G1 Z.2 F720 G1 E.7 F1500 G1 F6000 G1 X108.279 Y111.692 E.05637 G1 X108.488 Y112.147 E.01964 G1 X108.53 Y112.23 E.00363 G1 X108.612 Y112.35 E.0057 G1 X108.912 Y112.732 E.01904 G1 X109.119 Y112.926 E.01112 G1 X109.504 Y113.196 E.01843 G1 X109.754 Y113.32 E.01095 G1 X110.031 Y113.443 E.01187 G1 X110.225 Y113.637 E.01074 G1 X110.141 Y113.683 E.00371 G1 X109.697 Y113.729 E.0175 G1 X109.649 Y113.729 E.00189 G1 X107.4 Y111.479 E.1247 G1 X107.324 Y111.636 E.00682 G1 X107.137 Y111.861 E.01147 G1 X107.125 Y111.871 E.00062 G1 X108.983 Y113.729 E.10298 G1 X108.316 Y113.729 E.02614 G1 X106.706 Y112.119 E.08925 G1 X106.51 Y112.216 E.00857 G1 X106.286 Y112.366 E.01056 G1 X107.649 Y113.729 E.07555 G1 X106.982 Y113.729 E.02614 G1 X105.938 Y112.684 E.0579 G1 X105.732 Y112.998 E.01472 G1 X105.656 Y113.069 E.00407 G1 X106.316 Y113.729 E.03657 G1 X105.649 Y113.729 E.02614 G1 X105.277 Y113.357 E.02061 G1 X105.063 Y113.434 E.00894 G1 X104.884 Y113.45 E.00703 G1 X104.7 Y113.447 E.00721 G1 X104.982 Y113.729 E.01563 G1 X104.315 Y113.729 E.02614 G1 X103.994 Y113.407 E.01783 G1 X103.254 Y113.046 E.03225 G1 X103.119 Y112.674 E.01554 G1 X102.851 Y112.894 E.01361 G1 X102.829 Y112.909 E.00104 G1 X103.648 Y113.729 E.04542 G1 X102.982 Y113.729 E.02614 G1 X102.387 Y113.134 E.03299 G1 X102.141 Y113.236 E.01043 G1 X101.932 Y113.298 E.00854 G1 X101.89 Y113.304 E.00168 G1 X102.315 Y113.729 E.02356 G1 X101.648 Y113.729 E.02614 G1 X101.301 Y113.381 E.01927 G3 X101.179 Y113.382 I-.068 J-.588 E.00478 G1 X100.641 Y113.347 E.02115 G1 X100.59 Y113.337 E.00203 G1 X101.187 Y113.934 E.03312 ;PATH_TASK id=265 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z.8 F720 G1 X100.99 Y113.067 Z.8 F21000 G1 X99.71 Y112.423 G1 X99.403 Y112.087 G1 X99.374 Y112.054 G1 X99.345 Y112.019 G1 X99.317 Y111.985 G1 X99.289 Y111.949 G1 X99.263 Y111.913 G1 X99.237 Y111.876 G1 X99.212 Y111.839 G1 X99.188 Y111.801 G1 X99.165 Y111.763 G1 X99.142 Y111.724 G1 X99.121 Y111.685 G1 X99.1 Y111.645 G1 X99.08 Y111.605 G1 X99.062 Y111.564 G1 X98.643 Y110.595 G1 X99.027 Y107.549 G1 X99.239 Y106.871 G1 X98.588 Y106.668 G1 Z.2 F720 G1 E.7 F1500 G1 F6000 G1 X98.191 Y106.271 E.02201 G1 X97.771 Y106.271 E.01647 G1 X97.771 Y106.518 E.00967 G1 X98.36 Y107.107 E.03264 G1 X98.354 Y107.768 E.02591 G1 X97.771 Y107.185 E.03232 G1 X97.771 Y107.852 E.02614 G1 X98.912 Y108.992 E.06324 G1 X98.879 Y109.032 E.00203 G1 X98.806 Y109.131 E.00481 G1 X98.757 Y109.215 E.00383 G1 X98.659 Y109.406 E.00841 G1 X97.771 Y108.518 E.0492 G1 X97.771 Y109.185 E.02614 G1 X98.451 Y109.864 E.03766 G1 X98.424 Y109.939 E.00311 G1 X98.328 Y110.409 E.01879 G1 X97.771 Y109.852 E.03087 G1 X97.771 Y110.519 E.02614 G1 X98.588 Y111.335 E.04526 ;PATH_TASK id=266 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X97.566 Y110.98 F21000 G1 F6000 G1 X100.315 Y113.729 E.15241 G1 X99.648 Y113.729 E.02614 G1 X97.771 Y111.852 E.10404 G1 X97.771 Y112.519 E.02614 G1 X98.981 Y113.729 E.06707 G1 X98.314 Y113.729 E.02614 G1 X97.566 Y112.98 E.04151 ;PATH_TASK id=267 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z.8 F720 G1 X112.473 Y112.788 Z.8 F21000 G1 Z.2 F720 G1 E.7 F1500 ;WIDTH:0.521045 G1 F6000 G1 X113.31 Y113.625 E.04706 G1 X112.726 Y113.717 E.0235 G1 X112.213 Y113.204 E.02884 G1 X112.022 Y113.312 E.00872 G1 X111.771 Y113.408 E.01069 G1 X111.752 Y113.42 E.00086 G1 X112.267 Y113.934 E.02893 ;PATH_TASK id=268 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z.8 F720 G1 X112.267 Y114.314 Z.8 F21000 G1 X97.186 Y114.314 G1 X99.335 Y105.359 G1 X106.81 Y105.686 G1 X108.305 Y105.686 G1 X108.803 Y105.675 G1 X112.292 Y105.521 G1 X112.45 Y105.553 G1 X112.348 Y106.066 G1 Z.2 F720 G1 E.7 F1500 ;WIDTH:0.591415 G1 F6000 G1 X113.131 Y106.849 E.05051 ;PATH_TASK id=269 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z.8 F720 G1 X118.564 Y106.066 Z.8 F21000 G1 Z.2 F720 G1 E.7 F1500 ;WIDTH:0.515383 G1 F6000 G1 X119.001 Y106.503 E.02427 G1 X118.62 Y106.79 E.01874 G1 X118.102 Y106.271 E.0288 G1 X117.434 Y106.271 E.02625 G1 X118.299 Y107.137 E.04809 G1 X118.095 Y107.408 E.01332 G1 X118.026 Y107.532 E.00558 G1 X116.765 Y106.271 E.07003 G1 X116.097 Y106.271 E.02625 G1 X117.832 Y108.007 E.09641 G1 X117.787 Y108.133 E.00528 G1 X117.731 Y108.395 E.01053 G1 X117.72 Y108.562 E.00657 G1 X115.927 Y106.77 E.09958 G1 X116.026 Y107.086 E.01301 G1 X116.018 Y107.529 E.01741 G1 X117.728 Y109.238 E.09497 G1 X117.853 Y109.742 E.02037 G1 X117.882 Y109.837 E.00392 G1 X117.946 Y109.979 E.00612 G2 X118.018 Y110.094 I.934 J-.507 E.00533 G1 X118.097 Y110.19 E.00489 G1 X118.122 Y110.214 E.00136 G1 X118.092 Y110.271 E.0025 G1 X116.007 Y108.186 E.11583 G1 X116.005 Y108.333 E.00579 G1 X115.982 Y108.829 E.01951 G1 X117.911 Y110.758 E.10718 G1 X117.889 Y110.853 E.00381 G1 X117.879 Y111.394 E.02128 G1 X117.175 Y110.69 E.03912 G1 X117.181 Y111.285 E.02337 G1 X117.177 Y111.36 E.00297 G1 X119.526 Y113.709 E.1305 G1 X119.295 Y113.729 E.00911 G1 X118.877 Y113.729 E.01641 G1 X116.993 Y111.844 E.10472 G1 X116.928 Y111.943 E.00464 G1 X116.854 Y112.019 E.00416 G1 X116.784 Y112.078 E.00362 G1 X116.646 Y112.165 E.00641 G1 X118.209 Y113.729 E.08686 G1 X117.541 Y113.729 E.02625 G1 X116.204 Y112.391 E.07431 G1 X115.897 Y112.597 E.01449 G1 X115.817 Y112.673 E.00435 G1 X116.873 Y113.729 E.05867 G1 X116.205 Y113.729 E.02625 G1 X115.519 Y113.043 E.03808 G1 X115.441 Y113.162 E.00557 G1 X115.205 Y113.397 E.0131 G1 X115.74 Y113.933 E.02973 ;PATH_TASK id=270 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z.8 F720 G1 X115.74 Y114.314 Z.8 F21000 G1 X121.4 Y112.951 G1 X121.443 Y112.941 G1 X121.485 Y112.929 G1 X121.528 Y112.917 G1 X121.57 Y112.905 G1 X121.613 Y112.891 G1 X121.655 Y112.877 G1 X121.697 Y112.862 G1 X121.709 Y112.857 G1 X121.738 Y112.843 G1 X121.749 Y112.836 G1 X121.787 Y112.813 G1 X121.825 Y112.789 G1 X122.541 Y112.306 G1 X122.622 Y111.872 G1 X122.681 Y111.447 G1 X122.687 Y111.405 G1 X122.691 Y111.362 G1 X122.695 Y111.32 G1 X122.738 Y110.768 G1 X122.558 Y110.237 G1 X129.289 Y107.073 G1 X129.169 Y106.654 G1 Z.2 F720 G1 E.7 F1500 ;WIDTH:0.516695 G1 F6000 G1 X128.788 Y106.272 E.02126 G1 X128.117 Y106.271 E.02643 G1 X128.603 Y106.758 E.02711 G1 X128.246 Y107.07 E.01871 G1 X127.447 Y106.271 E.04452 G1 X126.777 Y106.271 E.0264 G1 X127.953 Y107.448 E.06557 G1 X127.761 Y107.753 E.01418 G1 X127.706 Y107.871 E.00514 G1 X126.107 Y106.271 E.0891 G1 X125.437 Y106.271 E.0264 G1 X127.532 Y108.366 E.11673 G1 X127.492 Y108.49 E.0051 G1 X127.46 Y108.621 E.00532 G1 X127.45 Y108.688 E.00267 G1 X127.433 Y108.937 E.00985 G1 X124.767 Y106.271 E.14854 G1 X124.096 Y106.271 E.0264 G1 X127.45 Y109.625 E.18686 G1 X127.502 Y109.922 E.01187 G2 X127.552 Y110.104 I1.068 J-.193 E.00746 G1 X127.6 Y110.212 E.00464 G1 X127.782 Y110.566 E.01568 G1 X127.838 Y110.661 E.00435 G1 X127.828 Y110.672 E.00062 G1 X123.426 Y106.271 E.24519 G1 X122.756 Y106.271 E.0264 G1 X127.577 Y111.092 E.26855 G2 X127.532 Y111.342 I1.107 J.325 E.01002 M73 P81 R7 G1 X127.533 Y111.456 E.00452 G1 X127.543 Y111.548 E.00363 G1 X127.576 Y111.761 E.00849 G1 X122.086 Y106.271 E.30582 G1 X121.829 Y106.271 E.01013 G1 X121.821 Y106.307 E.00145 G1 X122.054 Y106.415 E.01009 G1 X122.491 Y106.701 E.02058 G1 X122.697 Y106.883 E.01082 G1 X123.02 Y107.262 E.01962 G1 X123.168 Y107.496 E.01091 G1 X123.375 Y107.956 E.01988 G1 X123.451 Y108.227 E.01106 G1 X123.463 Y108.318 E.00363 G1 X128.874 Y113.729 E.30143 G1 X128.204 Y113.729 E.0264 G1 X123.512 Y109.037 E.26139 G1 X123.43 Y109.558 E.0208 G1 X123.418 Y109.613 E.00218 G1 X127.534 Y113.729 E.22932 G1 X126.864 Y113.729 E.0264 G1 X123.198 Y110.063 E.20422 G1 X123.139 Y110.141 E.00385 G1 X123.044 Y110.285 E.0068 G1 X123.074 Y110.351 E.00282 G1 X123.175 Y110.557 E.00907 G1 X123.238 Y110.739 E.00758 G1 X123.245 Y110.78 E.00165 G1 X126.194 Y113.729 E.16426 G1 X125.524 Y113.729 E.0264 G1 X123.256 Y111.461 E.12636 G1 X123.169 Y111.908 E.01797 G1 X123.133 Y112.008 E.00417 G1 X124.854 Y113.729 E.09589 G1 X124.184 Y113.729 E.0264 G1 X122.914 Y112.459 E.07075 G1 X122.822 Y112.618 E.00723 G1 X122.635 Y112.85 E.01175 G1 X123.514 Y113.729 E.04894 G1 X122.844 Y113.729 E.0264 G1 X122.284 Y113.17 E.03115 G1 X122.266 Y113.186 E.00096 G1 X122.027 Y113.345 E.01132 G1 X121.878 Y113.433 E.00682 G1 X122.379 Y113.934 E.02791 ;PATH_TASK id=271 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z.8 F720 G1 X122.379 Y114.314 Z.8 F21000 G1 X152.814 Y113.677 G1 X152.814 Y105.686 G1 X138.705 Y105.686 G1 X137.624 Y105.686 G1 X137.624 Y106.066 G1 Z.2 F720 G1 E.7 F1500 ;WIDTH:0.515618 G1 F6000 G1 X138.228 Y106.67 E.03359 G1 X138.118 Y106.784 E.00623 G1 X137.968 Y107.078 E.01298 G1 X137.161 Y106.271 E.04486 G1 X136.492 Y106.271 E.02628 G1 X137.833 Y107.612 E.07452 G1 X137.831 Y107.738 E.00495 G1 X137.662 Y107.782 E.00685 G1 X137.577 Y107.837 E.004 G1 X137.516 Y107.882 E.00298 G1 X137.48 Y107.927 E.00227 G1 X135.824 Y106.271 E.09204 G1 X135.155 Y106.271 E.02628 G1 X137.213 Y108.329 E.11438 G1 X137.147 Y108.549 E.00904 G1 X137.14 Y108.658 E.00428 G1 X137.135 Y108.92 E.0103 G1 X134.487 Y106.271 E.14722 G1 X133.818 Y106.271 E.02628 G1 X137.124 Y109.577 E.18376 G1 X137.122 Y109.729 E.00595 G1 X137.132 Y109.871 E.0056 G1 X137.149 Y109.961 E.00359 G1 X137.208 Y110.139 E.00738 G1 X137.261 Y110.244 E.00462 G1 X137.279 Y110.273 E.00133 G1 X137.336 Y110.355 E.00395 G1 X137.546 Y110.562 E.01161 G1 X137.781 Y110.642 E.00975 G1 X137.777 Y110.899 E.0101 G1 X133.15 Y106.271 E.25721 G1 X132.481 Y106.271 E.02628 G1 X137.766 Y111.556 E.29374 G1 X137.755 Y112.213 E.02584 G1 X131.813 Y106.271 E.33028 G1 X131.4 Y106.271 E.01622 G1 X131.166 Y106.293 E.00924 G1 X131.295 Y106.422 E.00717 G1 X131.381 Y106.457 E.00363 G1 X131.627 Y106.573 E.01069 G1 X132.06 Y106.859 E.02041 G1 X132.258 Y107.032 E.01035 G1 X132.594 Y107.418 E.02009 G1 X132.74 Y107.641 E.01051 G1 X132.941 Y108.068 E.01852 G1 X137.744 Y112.87 E.26696 G1 X137.742 Y112.979 E.00425 G1 X137.933 Y113.592 E.02526 G1 X138.155 Y113.701 E.0097 G1 X138.146 Y113.736 E.00145 G1 X137.935 Y113.731 E.0083 G1 X133.178 Y108.973 E.26444 G1 X133.228 Y109.477 E.01989 G3 X133.232 Y109.696 I-2.222 J.155 E.00863 G1 X137.265 Y113.729 E.22414 G1 X136.596 Y113.729 E.02628 G1 X133.218 Y110.351 E.18776 G1 X133.179 Y110.813 E.01822 G1 X133.163 Y110.923 E.00438 G1 X133.156 Y110.957 E.00137 G1 X135.928 Y113.729 E.15406 G1 X135.259 Y113.729 E.02628 G1 X133.043 Y111.513 E.12318 G1 X133.001 Y111.66 E.00601 G1 X132.87 Y112.008 E.01462 G1 X134.591 Y113.729 E.09566 G1 X133.922 Y113.729 E.02628 G1 X132.648 Y112.454 E.07085 G1 X132.406 Y112.819 E.0172 G1 X132.377 Y112.852 E.00173 G1 X133.254 Y113.729 E.04872 G1 X132.585 Y113.729 E.02628 G1 X132.04 Y113.184 E.03029 G1 X131.844 Y113.354 E.01022 G1 X131.66 Y113.472 E.00859 G1 X132.122 Y113.934 E.02571 ;PATH_TASK id=272 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z.8 F720 G1 X132.149 Y114.32 Z.8 F21000 G1 X139.74 Y113.192 G1 X147.489 Y107.197 G1 X150.586 Y107.249 G1 X150.927 Y107.335 G1 X151.806 Y107.625 G1 X151.986 Y108.137 G1 X151.748 Y108.725 G1 X151.447 Y109.334 G1 X151.442 Y109.343 G1 X151.437 Y109.346 G1 X151.335 Y109.468 G1 X151.722 Y109.793 G1 Z.2 F720 G1 E.7 F1500 ;WIDTH:0.591415 G1 F6000 G1 X152.434 Y110.505 E.04593 ;PATH_TASK id=273 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z.8 F720 G1 X152.434 Y113.774 Z.8 F21000 G1 Z.2 F720 G1 E.7 F1500 ;WIDTH:0.575694 G1 F6000 G1 X151.908 Y113.248 E.03295 G1 X151.834 Y113.34 E.00524 G1 X151.744 Y113.425 E.00549 G1 X151.517 Y113.61 E.01297 G1 X151.841 Y113.934 E.0203 ;PATH_TASK id=274 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z.8 F720 G1 X151.941 Y114.365 Z.8 F21000 G1 X152.814 Y105.686 G1 X151.501 Y105.686 G1 X151.501 Y106.066 G1 Z.2 F720 G1 E.7 F1500 ;WIDTH:0.504438 G1 F6000 G1 X152.229 Y106.793 E.03949 G1 X152.229 Y106.866 E.00278 G1 X151.966 Y106.711 E.0117 G1 X151.74 Y106.683 E.00871 G1 X151.461 Y106.678 E.01072 G1 X151.054 Y106.271 E.02209 G1 X150.401 Y106.271 E.02505 G1 X150.797 Y106.667 E.02148 G1 X150.133 Y106.656 E.02548 G1 X149.749 Y106.271 E.02088 G1 X149.096 Y106.271 E.02505 G1 X149.469 Y106.645 E.02027 G1 X148.805 Y106.634 E.02548 G1 X148.443 Y106.271 E.01966 G1 X147.791 Y106.271 E.02505 G1 X148.142 Y106.622 E.01905 G1 X147.92 Y106.619 E.00849 G1 X147.738 Y106.634 E.00701 G1 X147.572 Y106.705 E.00695 G1 X147.138 Y106.271 E.02354 G1 X146.485 Y106.271 E.02505 G1 X147.188 Y106.974 E.03813 G1 X146.979 Y107.235 E.01284 G1 X146.947 Y107.386 E.00591 G1 X145.832 Y106.271 E.06048 G1 X145.18 Y106.271 E.02505 G1 X146.893 Y107.985 E.09298 G1 X146.888 Y108.632 E.02484 G1 X144.527 Y106.271 E.12811 G1 X143.874 Y106.271 E.02505 G1 X147.434 Y109.831 E.1932 G1 X147.412 Y109.858 E.00133 G1 X147.339 Y109.957 E.00471 G1 X147.29 Y110.041 E.00375 G1 X147.189 Y110.238 E.00851 G1 X143.222 Y106.271 E.21528 G1 X142.569 Y106.271 E.02505 G1 X146.979 Y110.681 E.23934 G1 X146.956 Y110.77 E.00353 G1 X146.864 Y111.219 E.01758 G1 X141.916 Y106.271 E.26853 G1 X141.264 Y106.271 E.02505 G1 X146.873 Y111.88 E.30441 G1 X146.886 Y112.041 E.00617 G1 X146.954 Y112.325 E.01123 G1 X147.129 Y112.757 E.0179 G1 X147.175 Y112.835 E.00348 G1 X143.139 Y108.799 E.21905 G1 X143.14 Y108.723 E.00292 G1 X143.121 Y108.542 E.00697 G1 X143.032 Y108.283 E.01051 G1 X142.84 Y108.017 E.01261 G1 X142.528 Y107.803 E.0145 G1 X142.141 Y107.717 E.01524 G1 X142.055 Y107.716 E.00328 G1 X140.655 Y106.316 E.07598 G1 X140.236 Y106.428 E.01664 G1 X140.645 Y106.74 E.01975 G1 X140.945 Y107.197 E.02097 G1 X140.955 Y107.268 E.00277 G1 X141.601 Y107.914 E.03501 ;PATH_TASK id=275 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z.8 F720 G1 X142.926 Y109.239 Z.8 F21000 G1 Z.2 F720 G1 E.7 F1500 G1 F6000 G1 X147.416 Y113.729 E.24366 G1 X146.763 Y113.729 E.02505 G1 X143.049 Y110.015 E.20155 G1 X143.04 Y110.037 E.00093 G1 X142.989 Y110.14 E.00441 G1 X142.929 Y110.232 E.00418 G1 X142.796 Y110.414 E.00868 G1 X146.11 Y113.729 E.17988 G1 X145.458 Y113.729 E.02505 G1 X142.52 Y110.791 E.1594 G1 X142.245 Y111.169 E.01793 G1 X144.805 Y113.729 E.13893 G1 X144.152 Y113.729 E.02505 G1 X141.97 Y111.546 E.11845 G1 X141.694 Y111.923 E.01793 G1 X143.5 Y113.729 E.09798 G1 X142.847 Y113.729 E.02505 G1 X141.419 Y112.301 E.0775 G1 X141.143 Y112.678 E.01793 G1 X142.194 Y113.729 E.05703 G1 X141.541 Y113.729 E.02505 G1 X140.868 Y113.055 E.03655 G1 X140.593 Y113.432 E.01793 G1 X141.094 Y113.934 E.02724 ;PATH_TASK id=276 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z.8 F720 G1 X141.172 Y114.319 Z.8 F21000 G1 X140.924 Y111.985 G1 X140.607 Y109.816 G1 X140.733 Y109.796 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Outer wall ;WIDTH:0.537621 G1 F2700 G1 X139.931 Y110.91 E.05645 G1 X139.95 Y109.783 E.04637 G1 X140.693 Y109.796 E.03055 ;PATH_TASK id=277 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X140.606 Y109.809 Z.8 F21000 G1 X140.197 Y109.778 G1 X137.708 Y109.691 G1 X132.644 Y109.512 G1 X130.516 Y109.482 G1 X130.453 Y109.435 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.507401 G1 F2700 G1 X130.396 Y109.514 E.00378 G1 X130.24 Y109.539 E.0061 G1 X130.124 Y109.474 E.00513 G1 X130.054 Y109.268 E.0084 ;PATH_TASK id=278 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.511365 G1 X130.099 Y108.906 E.01423 G1 X130.2 Y108.776 E.00641 G1 X130.333 Y108.774 E.00518 G1 X130.461 Y108.913 E.00736 G1 X130.524 Y109.181 E.01073 ;PATH_TASK id=279 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X130.512 Y109.356 E.00681 ;PATH_TASK id=277 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.507401 G1 X130.477 Y109.403 E.00227 ;PATH_TASK id=280 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X130.544 Y109.435 F21000 G1 X130.521 Y109.475 G1 X130.517 Y109.48 G1 X130.865 Y109.736 ;TYPE:Outer wall ;WIDTH:0.499999 G1 F2700 G1 X130.653 Y109.933 E.01099 G1 X130.395 Y110.028 E.01047 G1 X130.092 Y110.016 E.01152 G1 X129.859 Y109.904 E.00979 G1 X129.67 Y109.687 E.01095 G1 X129.57 Y109.38 E.01227 G1 X129.573 Y109.062 E.01209 G1 X129.677 Y108.638 E.0166 G1 X129.863 Y108.409 E.0112 G1 X130.175 Y108.274 E.01291 G1 X130.531 Y108.321 E.01365 G1 X130.759 Y108.48 E.01057 G1 X130.83 Y108.592 E.00503 G1 X130.959 Y108.866 E.01151 G1 X131.007 Y109.221 E.01364 G1 X130.985 Y109.483 E.00997 G1 X130.882 Y109.7 E.00915 ;PATH_TASK id=281 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X131.1 Y110.477 Z.8 F21000 G1 X131.088 Y110.487 G1 X131.067 Y110.505 G1 X131.041 Y110.526 G1 X131.015 Y110.546 G1 X130.989 Y110.566 G1 X130.962 Y110.585 G1 X130.934 Y110.604 G1 X130.915 Y110.615 G1 X130.889 Y110.631 G1 X130.866 Y110.644 G1 X130.843 Y110.657 G1 X130.82 Y110.669 G1 X130.801 Y110.679 G1 X130.767 Y110.695 G1 X130.732 Y110.71 G1 X130.697 Y110.725 G1 X130.663 Y110.738 G1 X130.628 Y110.751 G1 X130.593 Y110.763 G1 X130.556 Y110.774 G1 X130.527 Y110.782 G1 X130.499 Y110.789 G1 X130.47 Y110.796 G1 X130.441 Y110.802 G1 X130.412 Y110.808 G1 X130.382 Y110.813 G1 X130.358 Y110.817 G1 X130.324 Y110.821 G1 X130.294 Y110.824 G1 X130.265 Y110.827 G1 X130.235 Y110.829 G1 X130.205 Y110.83 G1 X130.176 Y110.831 G1 X130.149 Y110.831 G1 X130.121 Y110.831 G1 X130.088 Y110.83 G1 X130.056 Y110.828 G1 X130.024 Y110.826 G1 X129.992 Y110.823 G1 X129.966 Y110.82 G1 X129.934 Y110.816 G1 X129.903 Y110.811 G1 X129.868 Y110.805 G1 X129.837 Y110.799 G1 X129.807 Y110.792 G1 X122.982 Y109.207 G1 X120.795 Y109.148 G1 X120.749 Y109.068 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.537412 G1 F2700 G1 X120.668 Y109.11 E.00376 ;PATH_TASK id=282 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.538003 G1 X120.447 Y109.063 E.0093 G1 X120.352 Y108.907 E.00751 G1 X120.377 Y108.722 E.00771 G1 X120.496 Y108.621 E.00643 G1 X120.686 Y108.619 E.00779 ;PATH_TASK id=283 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.537412 G1 X120.817 Y108.695 E.00625 G1 X120.86 Y108.882 E.00787 ;PATH_TASK id=281 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X120.815 Y109.034 E.00652 G1 X120.785 Y109.049 E.0014 ;PATH_TASK id=284 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X120.842 Y109.114 F21000 G1 X120.787 Y109.152 G1 X120.787 Y109.152 G1 X120.99 Y109.533 ;TYPE:Outer wall ;WIDTH:0.499999 G1 F2700 G1 X120.721 Y109.613 E.01067 G1 X120.384 Y109.586 E.01283 G1 X120.141 Y109.467 E.01029 G1 X119.943 Y109.247 E.01127 G1 X119.851 Y108.983 E.01061 G1 X119.862 Y108.657 E.0124 G1 X119.973 Y108.403 E.0105 G1 X120.16 Y108.221 E.00993 G1 X120.51 Y108.103 E.01406 G1 X120.9 Y108.151 E.01495 G1 X121.144 Y108.299 E.01084 G1 X121.289 Y108.499 E.00935 G1 X121.333 Y108.664 E.00651 G1 X121.336 Y109.113 E.01708 G1 X121.206 Y109.356 E.01046 G1 X121.021 Y109.508 E.00911 ;PATH_TASK id=285 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X120.802 Y109.144 Z.8 F21000 G1 X120.473 Y111.077 G1 X120.193 Y110.749 G1 Z.2 F720 G1 E.7 F1500 G1 F2700 G1 X120.399 Y110.642 E.00883 G1 X120.69 Y110.648 E.01105 G1 X120.9 Y110.73 E.00856 G1 X121.053 Y110.89 E.00842 G1 X121.13 Y111.24 E.01359 G1 X121.067 Y111.424 E.00738 G1 X120.896 Y111.599 E.0093 G1 X120.677 Y111.68 E.00888 G1 X120.413 Y111.666 E.01006 G1 X120.21 Y111.562 E.00868 G1 X120.062 Y111.375 E.00907 G1 X120.013 Y111.146 E.00887 G1 X120.06 Y110.92 E.00881 G1 X120.168 Y110.781 E.00669 ;PATH_TASK id=286 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 E-.7 G1 Z.8 F720 G1 X120.466 Y111.083 Z.8 F21000 G1 X118.364 Y110.826 G1 X114.823 Y112.992 G1 X114.37 Y112.984 G1 X113.705 Y112.669 G1 X112.542 Y110.973 G1 X110.949 Y111.068 G1 X110.906 Y111.015 G1 Z.2 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.517996 G1 F2700 G1 X110.825 Y110.991 E.00331 G1 X110.714 Y110.738 E.01091 ;PATH_TASK id=287 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.524956 G1 X110.641 Y110.215 E.02118 ;PATH_TASK id=288 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.540543 G1 X110.643 Y109.713 E.02075 G1 X110.698 Y108.955 E.03146 ;PATH_TASK id=289 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.527714 G1 X110.796 Y108.578 E.01569 G1 X110.898 Y108.442 E.00687 G1 X110.979 Y108.486 E.00372 G1 X111.092 Y108.833 E.01469 ;PATH_TASK id=290 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.533488 G1 X111.145 Y109.388 E.02275 ;PATH_TASK id=291 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X111.123 Y110.217 E.03384 ;PATH_TASK id=292 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.524956 G1 X111.047 Y110.72 E.02037 ;PATH_TASK id=286 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 ;WIDTH:0.517996 G1 X110.923 Y110.978 E.01133 ;PATH_TASK id=293 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000 G1 X110.987 Y111.028 F21000 G1 X110.942 Y111.074 G1 X110.941 Y111.074 G1 X111.175 Y111.436 ;TYPE:Outer wall ;WIDTH:0.499999 G1 F2700 G1 X110.969 Y111.512 E.00833 G1 X110.712 Y111.493 E.00979 G1 X110.509 Y111.377 E.00889 G1 X110.325 Y111.142 E.01134 G1 X110.218 Y110.78 E.01434 G1 X110.154 Y110.275 E.01935 G1 X110.144 Y109.691 E.02223 G1 X110.21 Y108.891 E.03051 G1 X110.366 Y108.308 E.02292 G1 X110.547 Y108.078 E.01113 G1 X110.827 Y107.946 E.01177 G1 X111.131 Y107.979 E.0116 G1 X111.339 Y108.133 E.00984 G1 X111.493 Y108.376 E.01094 G1 X111.607 Y108.88 E.01963 G1 X111.639 Y109.728 E.03223 G1 X111.613 Y110.251 E.0199 G1 X111.527 Y110.806 E.02135 G1 X111.36 Y111.248 E.01798 G1 X111.203 Y111.408 E.0085 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 M106 S122 ;LAYER_CHANGE ;Z:0.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;0.4 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;0.4 ;_SET_FAN_SPEED_CHANGING_LAYER M204 P3000 M104 S220 ; set nozzle temperature ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=294 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M486 S0 G1 Z1 F720 G1 X110.992 Y111.13 Z1 F21000 G1 X108.7 Y110.69 G1 X105.095 Y112.793 G1 X103.722 Y112.77 G1 X103.543 Y106.54 G1 X102.64 Y106.508 G1 X99.03 Y106.447 G1 X98.999 Y108.258 G1 X100.558 Y108.52 G1 X100.537 Y108.529 G1 X100.453 Y108.326 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F10200 G1 X100.132 Y108.598 E.01427 G1 X99.674 Y109.039 E.02151 G1 X99.261 Y109.573 E.02284 G1 X98.993 Y110.199 E.02305 G1 X98.928 Y110.824 E.02126 G1 X99.05 Y111.436 E.02114 G1 X99.348 Y111.964 E.02053 G1 X99.803 Y112.387 E.02105 G1 X100.367 Y112.654 E.02111 G1 X101.013 Y112.763 E.02219 G1 X101.668 Y112.72 E.02221 G1 X102.291 Y112.511 E.02223 G1 X102.792 Y112.144 E.02102 G1 X103.15 Y111.649 E.02068 G1 X103.319 Y111.178 E.01695 ;PATH_TASK id=295 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.432541 G1 X103.383 Y110.75 E.01401 ;PATH_TASK id=296 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.424752 G1 X103.328 Y110.508 E.00788 ;PATH_TASK id=297 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X103.273 Y110.266 E.0084 G1 X102.937 Y110.062 E.01331 G1 X102.162 Y109.966 E.02646 G1 X101.939 Y110.048 E.00802 ;PATH_TASK id=298 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.417373 G1 X101.717 Y110.13 E.00738 ;PATH_TASK id=299 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.388441 G1 X101.657 Y110.185 E.00233 ;PATH_TASK id=300 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.425452 G1 X101.569 Y110.329 E.00538 ;PATH_TASK id=301 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.462462 G1 X101.48 Y110.473 E.0059 ;PATH_TASK id=302 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.489394 G1 F10078.975 G1 X101.442 Y110.626 E.00583 ;PATH_TASK id=303 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.516326 G1 F9505.583 G1 X101.403 Y110.778 E.00618 G1 X101.311 Y110.881 E.00545 G1 X101.058 Y110.895 E.00998 G1 X100.929 Y110.816 E.00597 G1 X100.922 Y110.664 E.00598 G1 X101.022 Y110.479 E.0083 ;PATH_TASK id=304 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.489394 G1 F10078.975 G1 X101.123 Y110.293 E.00783 ;PATH_TASK id=305 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.462462 G1 F10200 G1 X101.31 Y110.081 E.00988 ;PATH_TASK id=306 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.423604 G1 X101.497 Y109.869 E.00896 ;PATH_TASK id=307 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.417373 G1 X101.756 Y109.672 E.01013 ;PATH_TASK id=308 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X102.015 Y109.475 E.01101 G1 X102.613 Y108.96 E.02672 G1 X102.999 Y108.556 E.01892 G1 X103.37 Y107.989 E.02295 ;PATH_TASK id=309 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.492497 G1 F10009.412 G1 X103.429 Y107.888 E.00436 ;PATH_TASK id=310 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.534995 G1 F9144.955 G1 X103.487 Y107.787 E.00477 ;PATH_TASK id=311 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.577493 G1 F8417.944 G1 X103.545 Y107.686 E.00518 ;PATH_TASK id=312 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.619991 G1 F7798.012 G1 X103.604 Y107.585 E.0056 ;PATH_TASK id=313 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.662488 G1 F7263.126 G1 X103.662 Y107.484 E.00601 G1 X103.682 Y107.6 E.00604 ;PATH_TASK id=314 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.619991 G1 F7798.012 G1 X103.701 Y107.715 E.00563 ;PATH_TASK id=315 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.577493 G1 F8417.944 G1 X103.72 Y107.831 E.00521 ;PATH_TASK id=316 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.534995 G1 F9144.955 G1 X103.74 Y107.947 E.0048 ;PATH_TASK id=317 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.492497 G1 F10009.412 G1 X103.759 Y108.063 E.00439 ;PATH_TASK id=318 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X103.724 Y110.107 E.06921 G1 X103.733 Y110.391 E.00961 ;PATH_TASK id=319 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.422865 G1 X103.741 Y110.674 E.00897 ;PATH_TASK id=320 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.432541 G1 X103.713 Y111.254 E.01879 ;PATH_TASK id=321 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X103.696 Y111.754 E.01695 G1 X103.704 Y112.351 E.0202 G1 X103.776 Y112.527 E.00646 G1 X104.026 Y112.758 E.01151 G1 X104.289 Y112.822 E.00914 G1 X104.752 Y112.83 E.0157 G1 X105.054 Y112.756 E.01049 G1 X105.26 Y112.574 E.00933 G1 X105.621 Y112.118 E.0197 G1 X106.13 Y111.726 E.02174 G1 X106.632 Y111.448 E.01943 G1 X106.778 Y111.276 E.00763 G1 X106.858 Y110.999 E.00975 G1 X106.867 Y110.491 E.0172 G1 X106.839 Y110.095 E.01341 G1 X106.71 Y109.875 E.00864 G1 X106.529 Y109.74 E.00764 G1 X106.017 Y109.728 E.01732 G1 X105.649 Y109.887 E.01358 G1 X105.693 Y107.288 E.08798 G1 X105.654 Y106.894 E.0134 G1 X105.462 Y106.637 E.01086 G1 X105.096 Y106.507 E.01314 G1 X104.386 Y106.495 E.02404 G1 X104.019 Y106.618 E.01308 G1 X103.878 Y106.767 E.00696 ;PATH_TASK id=322 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.496447 G1 F9922.237 G1 X103.829 Y106.849 E.00359 ;PATH_TASK id=323 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.542895 G1 F9000.459 G1 X103.78 Y106.93 E.00396 ;PATH_TASK id=324 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.589343 G1 F8235.39 G1 X103.731 Y107.012 E.00433 ;PATH_TASK id=325 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.63579 G1 F7590.197 G1 X103.682 Y107.094 E.0047 G1 X103.636 Y107.011 E.0047 ;PATH_TASK id=326 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.589343 G1 F8235.39 G1 X103.59 Y106.927 E.00433 ;PATH_TASK id=327 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.542895 G1 F9000.459 G1 X103.544 Y106.844 E.00396 ;PATH_TASK id=328 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.496447 G1 F9922.237 G1 X103.498 Y106.76 E.00359 ;PATH_TASK id=329 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X103.362 Y106.606 E.00696 G1 X102.989 Y106.471 E.01341 G1 X102.48 Y106.463 E.01725 ;PATH_TASK id=330 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.499426 G1 F9857.482 G1 X102.38 Y106.436 E.00391 ;PATH_TASK id=331 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.548853 G1 F8894.459 G1 X102.281 Y106.41 E.00433 ;PATH_TASK id=332 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.59828 G1 F8102.852 G1 X102.181 Y106.384 E.00476 ;PATH_TASK id=333 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.647707 G1 F7440.636 G1 X102.082 Y106.357 E.00518 ;PATH_TASK id=334 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X99.476 Y106.324 E.13103 ;PATH_TASK id=335 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.626588 G1 F7709.863 G1 X99.404 Y106.383 E.00454 ;PATH_TASK id=336 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.582441 G1 F8340.736 G1 X99.332 Y106.443 E.00419 ;PATH_TASK id=337 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.538294 G1 F9084.055 G1 X99.26 Y106.503 E.00385 ;PATH_TASK id=338 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.494147 G1 F9972.824 G1 X99.188 Y106.562 E.00351 ;PATH_TASK id=294 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X99.001 Y106.856 E.01178 G1 X98.977 Y107.014 E.00542 G1 X98.966 Y107.69 E.02288 G1 X99.011 Y107.932 E.00834 G1 X99.198 Y108.18 E.01052 G1 X99.504 Y108.306 E.01118 G1 X100.413 Y108.325 E.0308 ;PATH_TASK id=339 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T3000 G1 E-.7 F2700 G1 Z1 F720 G1 X100.353 Y108.125 Z1 F21000 G1 X100.534 Y108.07 G1 X100.841 Y107.975 G1 X101.148 Y107.879 G1 X101.457 Y107.779 G1 X101.547 Y107.937 G1 X101.584 Y107.916 G1 Z.4 F720 G1 E.7 F1500 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X101.514 Y107.992 E.0035 G1 X100.434 Y108.902 E.04779 G1 X100.022 Y109.292 E.01922 G1 X99.671 Y109.721 E.01874 G1 X99.433 Y110.209 E.01838 G1 X99.352 Y110.707 E.0171 G1 X99.415 Y111.189 E.01644 G1 X99.622 Y111.619 E.01615 G1 X99.957 Y111.974 E.01655 G1 X100.448 Y112.233 E.01877 G1 X100.956 Y112.331 E.01752 M73 P81 R6 G1 X101.505 Y112.315 E.01859 G1 X102.006 Y112.176 E.01759 G1 X102.436 Y111.9 E.0173 G1 X102.75 Y111.498 E.01726 G1 X102.927 Y111.029 E.01694 G1 X102.985 Y110.687 E.01176 G1 X102.945 Y110.542 E.00511 G1 X102.845 Y110.481 E.00397 G1 X102.111 Y110.392 E.02503 G1 X101.953 Y110.451 E.00569 G1 X101.844 Y110.941 E.01698 G1 X101.706 Y111.168 E.009 G1 X101.499 Y111.314 E.00857 G1 X101.19 Y111.379 E.01069 G1 X100.871 Y111.336 E.01089 G1 X100.639 Y111.2 E.00913 G1 X100.485 Y110.993 E.00872 G1 X100.434 Y110.76 E.00807 G1 X100.49 Y110.464 E.01018 G1 X100.708 Y110.097 E.01446 G1 X101.119 Y109.673 E.02001 G1 X102.241 Y108.726 E.04968 G1 X102.627 Y108.337 E.01854 G1 X102.948 Y107.877 E.01898 G1 X103.129 Y107.412 E.01689 G1 X103.161 Y107.096 E.01076 G1 X103.134 Y106.986 E.00383 G1 X102.982 Y106.9 E.00591 G1 X99.591 Y106.842 E.11481 G1 X99.469 Y106.887 E.0044 G1 X99.406 Y107.021 E.00503 G1 X99.408 Y107.769 E.02532 G1 X99.532 Y107.877 E.00555 G1 X101.544 Y107.916 E.06812 ;PATH_TASK id=340 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1 F720 G1 X101.537 Y107.919 Z1 F21000 G1 X99.915 Y108.259 G1 X98.999 Y108.258 G1 X99.03 Y106.447 G1 X105.663 Y106.56 G1 X105.619 Y109.126 G1 X105.53 Y109.43 G1 X105.131 Y110.32 G1 X105.315 Y110.502 G1 X105.211 Y110.607 G1 Z.4 F720 G1 E.7 F1500 G1 F10200 G1 X105.267 Y107.121 E.11801 G1 X105.198 Y106.974 E.00549 G1 X105.089 Y106.936 E.00392 G1 X104.389 Y106.924 E.02369 G1 X104.276 Y106.96 E.004 G1 X104.204 Y107.103 E.00542 G1 X104.117 Y112.208 E.17284 G1 X104.16 Y112.329 E.00435 G1 X104.296 Y112.394 E.00508 G1 X104.849 Y112.379 E.01875 G1 X105.197 Y111.924 E.01939 G1 X105.703 Y111.494 E.02249 G1 X106.329 Y111.136 E.0244 G1 X106.426 Y111.011 E.00536 G1 X106.442 Y110.291 E.02436 G1 X106.382 Y110.153 E.0051 G1 X106.187 Y110.121 E.00667 G1 X105.696 Y110.334 E.01813 G1 X105.246 Y110.587 E.01748 ;PATH_TASK id=341 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X105.322 Y110.51 Z1 F21000 G1 X105.619 Y109.126 G1 X105.663 Y106.56 G1 X104.745 Y106.544 G1 X103.844 Y106.546 G1 X103.83 Y107.098 G1 X103.682 Y107.094 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.662488 G1 F7263.126 G1 X103.662 Y107.484 E.02012 ;PATH_TASK id=342 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X103.82 Y107.49 Z1 F21000 G1 X103.844 Y106.546 G1 X104.745 Y106.544 G1 X105.663 Y106.56 G1 X106.842 Y109.455 G1 X106.83 Y110.155 G1 X109.704 Y112.549 G1 X109.691 Y112.569 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F10200 G1 X109.77 Y112.636 E.00351 G1 X110.361 Y112.873 E.02154 G1 X111.036 Y112.925 E.02293 G1 X111.682 Y112.786 E.02237 G1 X112.206 Y112.476 E.0206 G1 X112.631 Y111.999 E.02162 G1 X112.926 Y111.406 E.02242 G1 X113.071 Y110.778 E.02181 ;PATH_TASK id=343 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.414671 G1 X113.129 Y110.122 E.02035 ;PATH_TASK id=344 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.383002 G1 X113.141 Y109.454 E.01891 ;PATH_TASK id=345 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.40914 G1 X113.114 Y108.862 E.01804 ;PATH_TASK id=346 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X113.017 Y108.241 E.02128 G1 X112.779 Y107.632 E.02214 G1 X112.387 Y107.103 E.02227 G1 X111.876 Y106.739 E.02125 G1 X111.323 Y106.559 E.01968 G1 X110.802 Y106.528 E.01767 G1 X110.136 Y106.656 E.02296 G1 X109.61 Y106.954 E.02046 G1 X109.182 Y107.414 E.02128 G1 X108.884 Y107.981 E.02166 G1 X108.715 Y108.576 E.02093 M73 P82 R6 G1 X108.639 Y109.118 E.01855 G1 X108.609 Y109.743 E.02117 G1 X108.627 Y110.391 E.02195 ;PATH_TASK id=342 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X108.717 Y111.013 E.02128 G1 X108.92 Y111.628 E.02191 G1 X109.289 Y112.228 E.02383 G1 X109.661 Y112.543 E.01649 ;PATH_TASK id=347 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T3000 G1 X109.672 Y112.527 F21000 G1 X109.708 Y112.552 G1 X109.736 Y112.57 G1 X109.949 Y112.246 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X110.409 Y112.447 E.01699 G1 X110.935 Y112.505 E.01792 G1 X111.429 Y112.424 E.01696 G1 X111.874 Y112.199 E.01687 G1 X112.236 Y111.824 E.01763 G1 X112.498 Y111.332 E.01888 G1 X112.658 Y110.757 E.0202 G1 X112.733 Y110.131 E.02136 G1 X112.747 Y109.494 E.02157 G1 X112.715 Y108.953 E.01832 G1 X112.621 Y108.415 E.01849 G1 X112.444 Y107.912 E.01808 G1 X112.16 Y107.481 E.01746 G1 X111.78 Y107.17 E.01662 G1 X111.328 Y106.996 E.01639 G1 X110.907 Y106.951 E.01433 G1 X110.377 Y107.023 E.01812 G1 X109.912 Y107.257 E.01761 G1 X109.556 Y107.623 E.01727 G1 X109.31 Y108.065 E.01714 G1 X109.145 Y108.608 E.01922 G1 X109.064 Y109.178 E.01947 G1 X109.037 Y109.762 E.01981 G1 X109.049 Y110.28 E.01753 G1 X109.12 Y110.858 E.01971 G1 X109.278 Y111.382 E.01852 G1 X109.549 Y111.872 E.01894 G1 X109.919 Y112.219 E.01719 ;PATH_TASK id=348 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1 F720 G1 X109.696 Y112.544 Z1 F21000 G1 X109.708 Y112.552 G1 X109.74 Y112.573 G1 X109.773 Y112.594 G1 X109.81 Y112.616 G1 X109.857 Y112.642 G1 X109.887 Y112.659 G1 X109.921 Y112.676 G1 X109.957 Y112.694 G1 X109.993 Y112.711 G1 X110.03 Y112.727 G1 X110.067 Y112.742 G1 X110.104 Y112.757 G1 X110.142 Y112.771 G1 X110.184 Y112.785 G1 X110.231 Y112.8 G1 X110.279 Y112.813 G1 X110.327 Y112.826 G1 X110.375 Y112.837 G1 X110.424 Y112.848 G1 X110.472 Y112.857 G1 X110.522 Y112.865 G1 X110.571 Y112.872 G1 X110.621 Y112.877 G1 X110.67 Y112.882 G1 X110.721 Y112.886 G1 X110.777 Y112.889 G1 X110.837 Y112.891 G1 X114.804 Y112.958 G1 X116.518 Y111.504 G1 X116.55 Y109.62 G1 X115.674 Y110.107 G1 X115.645 Y110.129 G1 X115.612 Y110.155 G1 X115.358 Y110.052 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall G1 F10200 G1 X115.405 Y107.293 E.09339 G1 X115.358 Y107.048 E.00845 G1 X115.164 Y106.797 E.01073 G1 X114.805 Y106.673 E.01289 G1 X114.105 Y106.661 E.02369 G1 X113.795 Y106.739 E.0108 G1 X113.547 Y107 E.0122 G1 X113.484 Y107.261 E.00908 G1 X113.466 Y108.307 E.03543 G1 X113.479 Y108.92 E.02075 ;PATH_TASK id=349 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.403263 G1 X113.48 Y109.446 E.01576 ;PATH_TASK id=350 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.38482 G1 X113.467 Y110.199 E.0214 ;PATH_TASK id=351 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.423164 G1 X113.435 Y110.918 E.02277 ;PATH_TASK id=352 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X113.412 Y111.475 E.01885 G1 X113.4 Y112.438 E.03259 ;PATH_TASK id=348 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X113.466 Y112.658 E.00777 G1 X113.717 Y112.914 E.01215 G1 X113.997 Y112.987 E.0098 G1 X114.461 Y112.995 E.0157 G1 X114.762 Y112.922 E.01049 G1 X114.969 Y112.739 E.00933 G1 X115.154 Y112.479 E.01079 G1 X115.486 Y112.142 E.01604 G1 X115.909 Y111.845 E.01747 G1 X116.35 Y111.605 E.01702 G1 X116.53 Y111.349 E.01058 G1 X116.569 Y111.038 E.01062 G1 X116.573 Y110.368 E.02268 G1 X116.471 Y110.107 E.00948 G1 X116.228 Y109.9 E.0108 G1 X115.726 Y109.893 E.01698 G1 X115.394 Y110.036 E.01222 ;PATH_TASK id=353 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T3000 G1 X115.612 Y110.155 F21000 G1 X115.143 Y110.786 G1 X115.023 Y110.667 G1 X114.92 Y110.772 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X114.976 Y107.286 E.11801 G1 X114.905 Y107.138 E.00556 G1 X114.797 Y107.101 E.00384 G1 X114.094 Y107.089 E.02379 G1 X113.944 Y107.169 E.00579 G1 X113.912 Y107.268 E.0035 G1 X113.826 Y112.395 E.17356 G1 X113.862 Y112.486 E.00333 G1 X114.004 Y112.559 E.0054 G1 X114.558 Y112.545 E.01875 G1 X114.906 Y112.089 E.01939 G1 X115.198 Y111.824 E.01336 G1 X115.608 Y111.53 E.01707 G1 X116.074 Y111.278 E.01795 G1 X116.138 Y111.153 E.00475 G1 X116.148 Y110.428 E.02455 G1 X116.062 Y110.297 E.00529 G1 X115.896 Y110.286 E.00564 G1 X115.404 Y110.499 E.01813 G1 X114.954 Y110.752 E.01748 ;PATH_TASK id=354 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1 F720 G1 X115.031 Y110.675 Z1 F21000 G1 X115.612 Y110.155 G1 X115.645 Y110.129 G1 X115.674 Y110.107 G1 X116.55 Y109.62 G1 X118.996 Y112.391 G1 X119.024 Y112.422 G1 X119.053 Y112.452 G1 X119.081 Y112.48 G1 X119.103 Y112.501 G1 X119.126 Y112.522 G1 X119.155 Y112.549 G1 X119.186 Y112.576 G1 X119.217 Y112.602 G1 X119.248 Y112.627 G1 X119.28 Y112.652 G1 X119.313 Y112.676 G1 X119.346 Y112.699 G1 X119.38 Y112.721 G1 X119.414 Y112.743 G1 X119.448 Y112.764 G1 X119.483 Y112.784 G1 X119.518 Y112.804 G1 X119.554 Y112.823 G1 X119.591 Y112.841 G1 X119.627 Y112.858 G1 X119.664 Y112.875 G1 X119.706 Y112.892 G1 X119.752 Y112.911 G1 X119.799 Y112.928 G1 X119.846 Y112.944 G1 X119.894 Y112.959 G1 X119.942 Y112.973 G1 X119.991 Y112.986 G1 X120.04 Y112.997 G1 X120.089 Y113.008 G1 X120.138 Y113.017 G1 X120.188 Y113.026 G1 X120.239 Y113.033 G1 X120.295 Y113.04 G1 X120.357 Y113.046 G1 X120.42 Y113.051 G1 X120.484 Y113.054 G1 X120.546 Y113.056 G1 X120.591 Y113.056 G1 X120.635 Y113.056 G1 X120.679 Y113.055 G1 X120.723 Y113.053 G1 X120.767 Y113.051 G1 X120.811 Y113.048 G1 X120.854 Y113.044 G1 X120.898 Y113.039 G1 X120.941 Y113.034 G1 X120.984 Y113.027 G1 X121.027 Y113.02 G1 X121.069 Y113.013 G1 X121.112 Y113.004 G1 X121.154 Y112.994 G1 X121.196 Y112.984 G1 X121.237 Y112.973 G1 X121.279 Y112.961 G1 X121.32 Y112.948 G1 X121.361 Y112.934 G1 X121.401 Y112.92 G1 X121.441 Y112.904 G1 X121.481 Y112.888 G1 X121.52 Y112.871 G1 X121.559 Y112.853 G1 X121.598 Y112.834 G1 X121.636 Y112.814 G1 X121.673 Y112.793 G1 X121.711 Y112.772 G1 X121.747 Y112.749 G1 X121.783 Y112.726 G1 X121.819 Y112.702 G1 X121.854 Y112.677 G1 X121.888 Y112.652 G1 X121.922 Y112.625 G1 X121.956 Y112.598 G1 X121.988 Y112.57 G1 X122.019 Y112.543 G1 X122.037 Y112.526 G1 X122.055 Y112.509 G1 X122.083 Y112.481 G1 X122.112 Y112.452 G1 X122.14 Y112.422 G1 X122.168 Y112.392 G1 X122.195 Y112.361 G1 X122.221 Y112.329 G1 X122.246 Y112.297 G1 X122.271 Y112.264 G1 X122.295 Y112.231 G1 X122.318 Y112.197 G1 X122.341 Y112.163 G1 X122.363 Y112.128 G1 X122.383 Y112.093 G1 X122.404 Y112.057 G1 X122.423 Y112.021 G1 X122.441 Y111.984 G1 X122.459 Y111.947 G1 X122.476 Y111.91 G1 X122.491 Y111.872 G1 X122.506 Y111.834 G1 X122.52 Y111.795 G1 X122.534 Y111.756 G1 X122.546 Y111.717 G1 X122.557 Y111.678 G1 X122.568 Y111.638 G1 X122.577 Y111.598 G1 X122.586 Y111.558 G1 X122.594 Y111.518 G1 X122.601 Y111.477 G1 X122.607 Y111.437 G1 X122.612 Y111.396 G1 X122.617 Y111.355 G1 X122.62 Y111.314 G1 X122.623 Y111.273 G1 X122.625 Y111.232 G1 X122.626 Y111.192 G1 X122.626 Y111.163 G1 X122.626 Y111.135 G1 X122.626 Y111.103 G1 X122.625 Y111.072 G1 X122.623 Y111.041 G1 X122.621 Y111.009 G1 X122.618 Y110.978 G1 X122.615 Y110.947 G1 X122.611 Y110.915 G1 X122.607 Y110.884 G1 X122.602 Y110.853 G1 X122.596 Y110.822 G1 X122.59 Y110.791 G1 X122.584 Y110.76 G1 X122.576 Y110.729 G1 X122.434 Y110.14 G1 X122.434 Y110.139 G1 X122.392 Y110.225 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall G1 F10200 G1 X122.577 Y110.022 E.00929 G1 X122.796 Y109.565 E.01718 G1 X122.855 Y109.33 E.00819 G1 X122.896 Y108.704 E.02123 G1 X122.763 Y108.078 E.02167 G1 X122.442 Y107.519 E.02183 G1 X121.975 Y107.086 E.02154 G1 X121.393 Y106.806 E.02189 G1 X120.696 Y106.693 E.02389 G1 X119.832 Y106.798 E.02944 G1 X119.258 Y107.07 E.0215 G1 X118.773 Y107.516 E.02231 G1 X118.448 Y108.084 E.02215 G1 X118.317 Y108.716 E.02183 G1 X118.353 Y109.303 E.01993 G1 X118.525 Y109.774 E.01694 G1 X118.793 Y110.154 E.01577 G1 X118.652 Y110.371 E.00875 G1 X118.567 Y110.578 E.00758 G1 X118.475 Y111.07 E.01694 G1 X118.53 Y111.585 E.01755 G1 X118.589 Y111.785 E.00705 G1 X118.894 Y112.329 E.02109 G1 X119.37 Y112.76 E.02175 G1 X119.92 Y113.006 E.02039 G1 X120.559 Y113.095 E.02185 G1 X121.25 Y113.009 E.02355 G1 X121.816 Y112.749 E.02111 G1 X122.287 Y112.305 E.02189 G1 X122.575 Y111.75 E.02117 G1 X122.664 Y111.138 E.02092 G1 X122.59 Y110.618 E.0178 G1 X122.41 Y110.261 E.01351 ;PATH_TASK id=355 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T3000 G1 X122.413 Y110.319 F21000 G1 X122.413 Y110.319 G1 X121.758 Y110.36 G1 X121.691 Y110.217 G1 X121.769 Y110.181 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X121.876 Y110.128 E.00406 G1 X122.24 Y109.751 E.01774 G1 X122.429 Y109.281 E.01716 G1 X122.474 Y108.774 E.01721 G1 X122.382 Y108.276 E.01715 G1 X122.137 Y107.82 E.0175 G1 X121.774 Y107.465 E.01722 G1 X121.31 Y107.226 E.01765 G1 X120.733 Y107.12 E.01986 G1 X119.999 Y107.193 E.02497 G1 X119.535 Y107.398 E.01717 G1 X119.134 Y107.746 E.01796 G1 X118.864 Y108.189 E.01756 G1 X118.745 Y108.675 E.01695 G1 X118.769 Y109.189 E.01742 G1 X118.925 Y109.62 E.0155 G1 X119.2 Y109.973 E.01516 G1 X119.401 Y110.143 E.0089 G1 X119.266 Y110.237 E.00559 G1 X119.012 Y110.604 E.01512 G1 X118.907 Y111.043 E.01526 G1 X118.955 Y111.536 E.01676 G1 X119.161 Y111.977 E.01647 G1 X119.515 Y112.343 E.01725 G1 X119.992 Y112.584 E.01806 G1 X120.506 Y112.669 E.01765 G1 X121.039 Y112.623 E.01811 G1 X121.488 Y112.453 E.01624 G1 X121.879 Y112.132 E.01712 G1 X122.132 Y111.725 E.01621 G1 X122.236 Y111.246 E.0166 G1 X122.19 Y110.787 E.01561 G1 X121.992 Y110.385 E.01518 G1 X121.798 Y110.208 E.00887 ;PATH_TASK id=356 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1 F720 G1 X121.707 Y110.251 Z1 F21000 G1 X128.694 Y110.483 G1 X128.538 Y110.711 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall G1 F10200 G1 X128.428 Y110.743 E.00385 G1 X128.197 Y110.925 E.00997 G1 X128.09 Y111.145 E.00827 G1 X128.086 Y111.441 E.01002 G1 X128.28 Y112.129 E.02421 G1 X128.626 Y112.638 E.02084 G1 X129.122 Y113.015 E.02109 G1 X129.713 Y113.218 E.02114 G1 X130.371 Y113.25 E.02231 G1 X131.029 Y113.1 E.02284 G1 X131.592 Y112.77 E.02208 G1 X132.026 Y112.298 E.0217 G1 X132.323 Y111.734 E.02158 G1 X132.509 Y111.087 E.02277 G1 X132.595 Y110.46 E.02145 G1 X132.617 Y109.763 E.0236 G1 X132.587 Y109.226 E.0182 G1 X132.489 Y108.657 E.01954 G1 X132.255 Y108.039 E.02239 G1 X131.881 Y107.527 E.02145 G1 X131.339 Y107.119 E.02295 G1 X130.73 Y106.901 E.02189 G1 X130.155 Y106.856 E.01954 G1 X129.519 Y106.971 E.02187 G1 X128.942 Y107.274 E.02205 G1 X128.497 Y107.727 E.02152 G1 X128.194 Y108.294 E.02173 G1 X128.043 Y108.925 E.02197 G1 X128.052 Y109.592 E.02258 G1 X128.239 Y110.242 E.0229 G1 X128.516 Y110.678 E.01749 ;PATH_TASK id=357 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T3000 G1 X128.667 Y110.465 F21000 G1 X129.02 Y111.08 G1 X128.674 Y111.053 G1 X128.669 Y111.117 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X128.536 Y111.188 E.00509 G1 X128.499 Y111.313 E.00442 G1 X128.625 Y111.854 E.01881 G1 X128.866 Y112.267 E.01617 G1 X129.227 Y112.586 E.01633 G1 X129.746 Y112.791 E.0189 G1 X130.294 Y112.828 E.01856 G1 X130.829 Y112.721 E.01847 G1 X131.287 Y112.469 E.01771 G1 X131.651 Y112.091 E.01777 G1 X131.897 Y111.647 E.01715 G1 X132.079 Y111.053 E.02103 G1 X132.165 Y110.459 E.02033 G1 X132.192 Y109.869 E.01998 G1 X132.171 Y109.353 E.0175 G1 X132.091 Y108.828 E.01798 G1 X131.92 Y108.32 E.01814 G1 X131.644 Y107.897 E.01708 G1 X131.229 Y107.546 E.01839 G1 X130.731 Y107.338 E.01826 G1 X130.213 Y107.281 E.01765 G1 X129.701 Y107.359 E.01755 G1 X129.235 Y107.587 E.01754 G1 X128.868 Y107.941 E.01727 G1 X128.608 Y108.405 E.01802 G1 X128.471 Y108.932 E.0184 ;PATH_TASK id=358 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X128.468 Y109.49 E.01888 G1 X128.607 Y110.022 E.01864 G1 X128.899 Y110.473 E.01817 ;PATH_TASK id=359 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.499363 G1 F9858.85 G1 X129.081 Y110.645 E.00951 ;PATH_TASK id=360 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.548727 G1 F8700 G1 X129.263 Y110.817 E.01053 ;PATH_TASK id=361 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.59809 G1 F8105.625 G1 X129.446 Y110.989 E.01157 G1 X129.328 Y111.018 E.00562 ;PATH_TASK id=362 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.552051 G1 F8838.599 G1 X129.21 Y111.048 E.00515 ;PATH_TASK id=363 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.506011 G1 F9717.312 G1 X128.94 Y111.083 E.0105 ;PATH_TASK id=364 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.478005 G1 F10200 G1 X128.709 Y111.112 E.00841 ;PATH_TASK id=365 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1 F720 G1 X128.713 Y111.056 Z1 F21000 G1 X129.02 Y111.08 G1 X130.954 Y111.25 G1 X130.942 Y110.659 G1 X130.938 Y110.663 G1 X131.074 Y110.769 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F10200 G1 X130.974 Y111.154 E.01347 G1 X130.756 Y111.564 E.01571 G1 X130.566 Y111.743 E.00885 G1 X130.326 Y111.852 E.00892 G1 X129.983 Y111.844 E.01162 G1 X129.785 Y111.728 E.00774 G1 X129.646 Y111.532 E.00816 ;PATH_TASK id=366 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.49497 G1 F9954.662 G1 X129.609 Y111.325 E.00788 ;PATH_TASK id=367 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.53994 G1 F9053.962 G1 X129.572 Y111.119 E.00867 ;PATH_TASK id=368 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.566927 G1 F8587.671 G1 X129.531 Y111.063 E.00302 ;PATH_TASK id=369 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.593914 G1 F8167.058 G1 X129.49 Y111.007 E.00317 ;PATH_TASK id=370 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X129.565 Y111.022 E.0035 ;PATH_TASK id=371 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.566927 G1 F8587.671 G1 X129.64 Y111.037 E.00333 ;PATH_TASK id=372 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.53994 G1 F9053.962 G1 X129.899 Y111.044 E.01072 ;PATH_TASK id=373 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.49497 G1 F9954.662 G1 X130.158 Y111.05 E.00975 ;PATH_TASK id=365 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X130.675 Y110.97 E.01771 G1 X131.039 Y110.787 E.01377 ;PATH_TASK id=374 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X130.918 Y110.689 Z1 F21000 G1 X130.153 Y111.62 G1 X130.109 Y111.618 G1 X130.109 Y111.619 G1 X130.113 Y111.452 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.401104 G1 F10200 G1 X130.303 Y111.445 E.00566 ;PATH_TASK id=375 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X130.32 Y111.612 Z1 F21000 G1 X129.47 Y111.13 G1 X129.02 Y111.08 G1 X128.351 Y111.028 G1 X128.131 Y111.48 G1 X128.137 Y111.521 G1 X128.144 Y111.561 G1 X128.151 Y111.601 G1 X128.159 Y111.642 G1 X128.168 Y111.681 G1 X128.177 Y111.721 G1 X128.187 Y111.76 G1 X128.198 Y111.799 G1 X128.209 Y111.838 G1 X128.222 Y111.877 G1 X128.234 Y111.915 G1 X128.248 Y111.953 G1 X128.262 Y111.991 G1 X128.277 Y112.028 G1 X128.293 Y112.065 G1 X128.309 Y112.102 G1 X128.327 Y112.138 G1 X128.344 Y112.174 G1 X128.363 Y112.21 G1 X128.383 Y112.245 G1 X128.403 Y112.28 G1 X128.424 Y112.314 G1 X128.445 Y112.348 G1 X128.467 Y112.382 G1 X128.49 Y112.415 G1 X128.514 Y112.447 G1 X128.539 Y112.479 G1 X128.564 Y112.51 G1 X128.59 Y112.541 G1 X128.616 Y112.571 G1 X128.643 Y112.601 G1 X128.671 Y112.63 G1 X128.699 Y112.659 G1 X128.728 Y112.687 G1 X128.756 Y112.713 G1 X128.78 Y112.734 G1 X128.805 Y112.756 G1 X128.834 Y112.78 G1 X128.864 Y112.804 G1 X128.895 Y112.827 G1 X128.925 Y112.85 G1 X128.957 Y112.872 G1 X128.989 Y112.893 G1 X129.021 Y112.914 G1 X129.053 Y112.934 G1 X129.086 Y112.953 G1 X129.12 Y112.972 G1 X129.154 Y112.99 G1 X129.192 Y113.009 G1 X129.234 Y113.029 G1 X129.277 Y113.048 G1 X129.321 Y113.067 G1 X129.365 Y113.084 G1 X129.41 Y113.1 G1 X129.455 Y113.115 G1 X129.5 Y113.129 G1 X129.545 Y113.141 G1 X129.591 Y113.153 G1 X129.638 Y113.164 G1 X129.684 Y113.174 G1 X129.731 Y113.183 G1 X129.778 Y113.19 G1 X129.826 Y113.197 G1 X129.879 Y113.204 G1 X129.937 Y113.21 G1 X129.997 Y113.214 G1 X130.056 Y113.217 G1 X130.115 Y113.219 G1 X130.151 Y113.219 G1 X130.186 Y113.219 G1 X130.236 Y113.218 G1 X130.287 Y113.216 G1 X130.338 Y113.213 G1 X130.388 Y113.21 G1 X130.439 Y113.205 G1 X130.489 Y113.199 G1 X130.539 Y113.192 G1 X130.589 Y113.184 G1 X130.638 Y113.175 G1 X130.687 Y113.164 G1 X130.736 Y113.153 G1 X130.784 Y113.141 G1 X130.833 Y113.127 G1 X130.88 Y113.113 G1 X130.928 Y113.097 G1 X130.975 Y113.08 G1 X131.022 Y113.063 G1 X131.068 Y113.044 G1 X131.113 Y113.023 G1 X131.159 Y113.002 G1 X131.203 Y112.98 G1 X131.247 Y112.957 G1 X131.291 Y112.932 G1 X131.334 Y112.907 G1 X131.376 Y112.88 G1 X131.417 Y112.853 G1 X131.458 Y112.824 G1 X131.499 Y112.795 G1 X131.538 Y112.764 G1 X131.577 Y112.733 G1 X131.615 Y112.701 G1 X131.653 Y112.668 G1 X131.689 Y112.634 G1 X131.725 Y112.599 G1 X131.76 Y112.563 G1 X131.795 Y112.526 G1 X131.829 Y112.489 G1 X131.862 Y112.45 G1 X131.89 Y112.416 G1 X131.917 Y112.381 G1 X131.949 Y112.34 G1 X131.979 Y112.298 G1 X132.009 Y112.255 G1 X132.037 Y112.212 G1 X132.065 Y112.167 G1 X132.092 Y112.122 G1 X132.121 Y112.071 G1 X132.152 Y112.014 G1 X132.181 Y111.956 G1 X132.21 Y111.897 G1 X132.237 Y111.836 G1 X132.263 Y111.775 G1 X132.288 Y111.713 G1 X132.314 Y111.642 G1 X132.341 Y111.564 G1 X132.367 Y111.483 G1 X132.391 Y111.401 G1 X132.414 Y111.317 G1 X132.437 Y111.223 G1 X132.46 Y111.117 G1 X132.47 Y111.069 G1 X138.19 Y110.095 G1 X138.191 Y110.075 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F10200 G1 X138.408 Y110.142 E.00769 G1 X138.363 Y112.771 E.089 G1 X138.405 Y113.005 E.00805 G1 X138.597 Y113.262 E.01086 G1 X138.963 Y113.392 E.01314 G1 X139.646 Y113.392 E.0231 G1 X140.033 Y113.151 E.01546 G1 X142.434 Y109.861 E.13784 G1 X142.508 Y109.571 E.01014 G1 X142.501 Y108.796 E.02624 G1 X142.327 Y108.497 E.01173 G1 X142.146 Y108.379 E.0073 G1 X141.919 Y108.331 E.00786 G1 X140.36 Y108.305 E.05276 G1 X140.37 Y107.718 E.01985 G1 X140.327 Y107.482 E.00811 G1 X140.135 Y107.226 E.01084 G1 X139.77 Y107.097 E.0131 G1 X139.071 Y107.085 E.02369 G1 X138.759 Y107.165 E.01088 G1 X138.552 Y107.358 E.00959 G1 X138.455 Y107.613 E.00925 G1 X138.44 Y108.272 E.02231 G1 X138.058 Y108.354 E.01322 G1 X137.822 Y108.601 E.01156 G1 X137.754 Y108.871 E.00943 G1 X137.743 Y109.52 E.02195 G1 X137.797 Y109.781 E.00903 G1 X137.976 Y110.01 E.00986 G1 X138.152 Y110.064 E.00622 ;PATH_TASK id=376 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T3000 G1 X138.152 Y110.094 F21000 G1 X137.776 Y110.088 G1 X137.784 Y109.622 G1 X138.201 Y109.629 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X138.35 Y109.712 E.00581 G1 X138.844 Y109.72 E.0167 G1 X138.792 Y112.778 E.10351 G1 X138.861 Y112.924 E.00549 G1 X138.971 Y112.963 E.00392 G1 X139.537 Y112.973 E.01918 G1 X139.687 Y112.898 E.00568 G1 X142.075 Y109.627 E.13709 G1 X142.09 Y108.963 E.02249 G1 X142.033 Y108.809 E.00554 G1 X141.911 Y108.76 E.00444 G1 X139.925 Y108.726 E.06726 G1 X139.942 Y107.711 E.03436 G1 X139.872 Y107.564 E.0055 G1 X139.763 Y107.526 E.00391 G1 X138.97 Y107.538 E.02683 G1 X138.882 Y107.658 E.00505 G1 X138.861 Y108.708 E.03555 G1 X138.273 Y108.724 E.0199 G1 X138.203 Y108.798 E.00345 G1 X138.182 Y108.919 E.00416 G1 X138.2 Y109.589 E.02268 ;PATH_TASK id=377 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1 F720 G1 X137.785 Y109.582 Z1 F21000 G1 X137.807 Y108.304 G1 X138.502 Y107.119 G1 X152.093 Y107.35 G1 X152.083 Y107.789 G1 X152.119 Y107.79 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.569799 G1 F8540.864 G1 X152.099 Y107.749 E.00202 ;PATH_TASK id=378 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.529866 G1 F9241.28 G1 X152.048 Y107.643 E.00476 ;PATH_TASK id=379 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.489933 G1 F10066.838 G1 X151.997 Y107.536 E.00437 ;PATH_TASK id=380 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X151.709 Y107.33 E.01201 G1 X151.523 Y107.297 E.00639 G1 X148.121 Y107.24 E.11516 G1 X147.765 Y107.354 E.01267 G1 X147.562 Y107.604 E.01089 G1 X147.51 Y107.84 E.00816 G1 X147.506 Y108.618 E.02633 G1 X147.629 Y108.903 E.01051 ;PATH_TASK id=381 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X147.732 Y109.006 E.00492 G1 X148.037 Y109.132 E.01118 G1 X148.987 Y109.152 E.03215 G1 X148.665 Y109.424 E.01427 G1 X148.207 Y109.865 E.02151 G1 X147.794 Y110.399 E.02284 G1 X147.526 Y111.025 E.02305 G1 X147.461 Y111.649 E.02126 G1 X147.583 Y112.262 E.02114 G1 X147.881 Y112.79 E.02052 G1 X148.337 Y113.213 E.02105 G1 X148.9 Y113.48 E.02111 ;PATH_TASK id=382 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.496054 G1 F9930.848 G1 X149.023 Y113.527 E.00495 ;PATH_TASK id=383 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.542108 G1 F9014.64 G1 X149.145 Y113.574 E.00545 ;PATH_TASK id=384 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.588163 G1 F8253.209 G1 X149.268 Y113.621 E.00596 ;PATH_TASK id=385 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.634217 G1 F7610.389 G1 X149.391 Y113.668 E.00646 G1 X149.524 Y113.677 E.00654 ;PATH_TASK id=386 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.635174 G1 F7598.091 G1 X150.058 Y113.662 E.02632 G1 X150.221 Y113.612 E.00839 ;PATH_TASK id=387 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.589089 G1 F8239.208 G1 X150.422 Y113.52 E.01004 ;PATH_TASK id=388 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.542726 G1 F9003.499 G1 X150.623 Y113.428 E.00919 ;PATH_TASK id=389 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.496363 G1 F9924.084 G1 X150.824 Y113.336 E.00834 ;PATH_TASK id=390 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X151.331 Y112.964 E.02129 G1 X151.684 Y112.475 E.0204 G1 X151.861 Y112.007 E.01694 G1 X151.949 Y111.484 E.01794 G1 X151.865 Y111.175 E.01087 G1 X151.607 Y110.936 E.01189 G1 X151.433 Y110.881 E.00618 G1 X150.695 Y110.792 E.02516 G1 X150.472 Y110.874 E.00802 ;PATH_TASK id=391 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.41737 G1 X150.25 Y110.956 E.00738 ;PATH_TASK id=392 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.388439 G1 X150.19 Y111.011 E.00233 ;PATH_TASK id=393 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.425449 G1 X150.102 Y111.155 E.00538 ;PATH_TASK id=394 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.462459 G1 X150.013 Y111.299 E.0059 ;PATH_TASK id=395 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.489527 G1 F10075.984 G1 X149.975 Y111.451 E.00583 ;PATH_TASK id=396 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.516594 G1 F9500.205 G1 X149.936 Y111.604 E.00618 G1 X149.834 Y111.712 E.00584 G1 X149.592 Y111.721 E.00957 G1 X149.462 Y111.642 E.00597 G1 X149.455 Y111.49 E.00597 G1 X149.556 Y111.305 E.0083 ;PATH_TASK id=397 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.489527 G1 F10075.984 G1 X149.656 Y111.119 E.00783 ;PATH_TASK id=398 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.462459 G1 F10200 G1 X149.843 Y110.907 E.00988 ;PATH_TASK id=399 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.4236 G1 X150.03 Y110.695 E.00896 ;PATH_TASK id=400 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.41737 G1 X150.289 Y110.498 E.01013 ;PATH_TASK id=401 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X150.548 Y110.301 E.01101 G1 X151.091 Y109.842 E.02407 G1 X151.533 Y109.382 E.02157 G1 X151.903 Y108.814 E.02295 ;PATH_TASK id=402 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.49399 G1 F9976.278 G1 X151.972 Y108.684 E.00552 ;PATH_TASK id=403 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.537981 G1 F9089.789 G1 X152.042 Y108.555 E.00606 ;PATH_TASK id=404 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.581972 G1 F8347.989 G1 X152.111 Y108.425 E.0066 ;PATH_TASK id=405 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.625963 G1 F7718.127 G1 X152.18 Y108.295 E.00713 G1 X152.201 Y107.961 E.01623 ;PATH_TASK id=406 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.609732 G1 F7939.141 G1 X152.15 Y107.855 E.00554 ;PATH_TASK id=377 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.569799 G1 F8540.864 G1 X152.136 Y107.826 E.00138 ;PATH_TASK id=407 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T3000 G1 X152.082 Y107.825 F21000 G1 X152.08 Y107.931 G1 X151.694 Y107.922 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X151.657 Y107.797 E.0044 G1 X151.515 Y107.726 E.00536 G1 X148.124 Y107.668 E.11481 G1 X148.015 Y107.702 E.00388 G1 X147.939 Y107.847 E.00553 G1 X147.927 Y108.523 E.02288 G1 X147.966 Y108.638 E.00412 G1 X148.065 Y108.702 E.00398 G1 X150.117 Y108.742 E.06947 G1 X150.047 Y108.818 E.0035 G1 X148.967 Y109.728 E.04779 G1 X148.555 Y110.118 E.01922 G1 X148.204 Y110.547 E.01874 G1 X147.966 Y111.034 E.01838 G1 X147.885 Y111.533 E.0171 G1 X147.949 Y112.015 E.01644 G1 X148.155 Y112.445 E.01615 G1 X148.491 Y112.8 E.01655 G1 X148.981 Y113.059 E.01877 G1 X149.489 Y113.157 E.01752 G1 X150.038 Y113.141 E.01859 G1 X150.539 Y113.001 E.0176 G1 X150.949 Y112.741 E.01644 G1 X151.283 Y112.324 E.0181 G1 X151.46 Y111.855 E.01694 G1 X151.518 Y111.513 E.01175 G1 X151.495 Y111.392 E.00417 G1 X151.367 Y111.304 E.00527 G1 X150.644 Y111.218 E.02464 G1 X150.487 Y111.277 E.00569 G1 X150.378 Y111.767 E.01698 G1 X150.24 Y111.993 E.00897 G1 X150.018 Y112.146 E.00913 G1 X149.724 Y112.205 E.01014 G1 X149.405 Y112.162 E.01092 G1 X149.172 Y112.026 E.00913 G1 X149.019 Y111.818 E.00872 G1 X148.968 Y111.586 E.00806 G1 X149.023 Y111.29 E.01018 G1 X149.241 Y110.923 E.01446 G1 X149.653 Y110.499 E.02001 G1 X150.774 Y109.551 E.04968 G1 X151.16 Y109.163 E.01854 G1 X151.481 Y108.703 E.01899 G1 X151.662 Y108.238 E.01688 G1 X151.69 Y107.962 E.00941 ;PATH_TASK id=408 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T7000 G1 X152.079 Y107.971 F21000 G1 X152.08 Y107.892 G1 X152.767 Y107.908 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.625963 G1 F7718.127 G1 X152.758 Y108.345 E.0212 G1 X152.78 Y108.505 E.00784 ;PATH_TASK id=409 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.581972 G1 F8347.989 G1 X152.802 Y108.666 E.00725 ;PATH_TASK id=410 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.537981 G1 F9089.789 G1 X152.824 Y108.826 E.00666 ;PATH_TASK id=411 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.49399 G1 F9976.278 G1 X152.846 Y108.986 E.00606 ;PATH_TASK id=412 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X152.846 Y114.346 E.18145 G1 X150.791 Y114.346 E.06957 ;PATH_TASK id=413 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.496293 G1 F9925.607 G1 X150.611 Y114.323 E.00686 ;PATH_TASK id=414 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.542587 G1 F9006.007 G1 X150.43 Y114.3 E.00756 ;PATH_TASK id=415 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.588881 G1 F8242.358 G1 X150.25 Y114.277 E.00826 ;PATH_TASK id=416 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.635174 G1 F7598.091 G1 X150.069 Y114.254 E.00896 G1 X149.335 Y114.254 E.03615 ;PATH_TASK id=417 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.634217 G1 F7610.389 G1 X149.206 Y114.277 E.00646 ;PATH_TASK id=418 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.588163 G1 F8253.209 G1 X149.076 Y114.3 E.00596 ;PATH_TASK id=419 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.542108 G1 F9014.64 G1 X148.947 Y114.323 E.00545 ;PATH_TASK id=420 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.496054 G1 F9930.848 G1 X148.817 Y114.346 E.00495 ;PATH_TASK id=421 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X97.154 Y114.346 E1.74876 G1 X97.154 Y105.654 E.29424 G1 X98.85 Y105.654 E.05742 ;PATH_TASK id=422 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.494129 G1 F9973.216 G1 X99.034 Y105.676 E.00697 ;PATH_TASK id=423 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.538258 G1 F9084.705 G1 X99.219 Y105.698 E.00765 ;PATH_TASK id=424 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.582388 G1 F8341.559 G1 X99.403 Y105.72 E.00833 ;PATH_TASK id=425 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.626517 G1 F7710.8 G1 X99.588 Y105.742 E.00901 ;PATH_TASK id=426 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.647707 G1 F7440.636 G1 X102.087 Y105.752 E.12568 G1 X102.187 Y105.728 E.00518 ;PATH_TASK id=427 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.59828 G1 F8102.852 G1 X102.287 Y105.703 E.00476 ;PATH_TASK id=428 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.548853 G1 F8894.459 G1 X102.387 Y105.678 E.00433 ;PATH_TASK id=429 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.499426 G1 F9857.482 G1 X102.487 Y105.654 E.00391 ;PATH_TASK id=430 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X152.846 Y105.654 E1.70461 G1 X152.846 Y107.248 E.05399 ;PATH_TASK id=431 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.489576 G1 F10074.884 G1 X152.827 Y107.413 E.00617 ;PATH_TASK id=432 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.529152 G1 F9254.851 G1 X152.807 Y107.578 E.00671 ;PATH_TASK id=433 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.568728 G1 F8558.261 G1 X152.787 Y107.743 E.00726 ;PATH_TASK id=434 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.608304 G1 F7959.193 G1 X152.772 Y107.868 E.00593 ;PATH_TASK id=435 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X152.889 Y107.868 Z1 F21000 G1 X152.889 Y114.389 G1 X153.275 Y114.775 G1 Z.4 F720 G1 E.7 F1500 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X96.725 Y114.775 E1.91415 G1 X96.725 Y105.225 E.32326 G1 X153.275 Y105.225 E1.91415 G1 X153.275 Y114.735 E.3219 ;PATH_TASK id=436 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X152.889 Y114.389 Z1 F21000 G1 X151.97 Y110.988 G1 X150.751 Y110.081 G1 X150.751 Y110.081 G1 X151.035 Y110.423 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill G1 F11054.364 G1 X151.525 Y110.486 E.01674 G1 X151.835 Y110.604 E.0112 G1 X152.178 Y110.922 E.01586 ;PATH_TASK id=437 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.47298 G1 F10463.674 G1 X152.286 Y111.17 E.00968 ;PATH_TASK id=438 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.503002 G1 F9780.871 G1 X152.393 Y111.419 E.01036 G1 X152.439 Y110.808 E.02344 ;PATH_TASK id=439 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F11054.364 G1 X152.439 Y109.015 E.0607 G1 X152.397 Y108.802 E.00733 G1 X151.774 Y109.726 E.03773 G1 X151.346 Y110.161 E.02065 G1 X151.065 Y110.397 E.01243 ;PATH_TASK id=440 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X152.017 Y110.108 F21000 ;WIDTH:0.544214 G1 F8976.768 G1 X151.954 Y110.108 E.00261 G1 X151.923 Y110.162 E.00261 G1 X151.954 Y110.216 E.00261 G1 X152.017 Y110.216 E.00261 G1 X152.028 Y110.197 E.00094 ;PATH_TASK id=441 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X152.345 Y112.131 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.622008 G1 F7770.844 G1 X152.362 Y111.929 E.00974 ;PATH_TASK id=442 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.587867 G1 F8257.684 G1 X152.379 Y111.727 E.00917 ;PATH_TASK id=443 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.562288 G1 F8664.383 G1 X152.396 Y111.526 E.00874 G1 X152.394 Y111.459 E.0029 ;PATH_TASK id=444 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X152.017 Y113.432 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.543038 G1 F8997.876 G1 X151.955 Y113.432 E.0026 G1 X151.923 Y113.486 E.0026 G1 X151.955 Y113.54 E.0026 G1 X152.017 Y113.54 E.0026 G1 X152.028 Y113.52 E.00094 ;PATH_TASK id=445 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X150.652 Y113.89 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X150.865 Y113.939 E.00742 G1 X152.439 Y113.939 E.05328 G1 X152.439 Y112.688 E.04236 ;PATH_TASK id=446 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.470251 G1 F10530.478 G1 X152.419 Y112.563 E.0045 ;PATH_TASK id=447 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.510755 G1 F9618.776 G1 X152.399 Y112.438 E.00493 ;PATH_TASK id=448 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.551259 G1 F8852.36 G1 X152.379 Y112.313 E.00536 ;PATH_TASK id=449 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.591763 G1 F8199.066 G1 X152.358 Y112.187 E.00579 ;PATH_TASK id=450 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.625547 G1 F7723.645 G1 X152.345 Y112.131 E.00283 ;PATH_TASK id=451 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.615443 G1 F7859.945 G1 X152.275 Y112.253 E.00671 ;PATH_TASK id=452 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.568174 G1 F8567.294 G1 X152.205 Y112.375 E.00615 ;PATH_TASK id=453 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.520904 G1 F9414.548 G1 X152.134 Y112.497 E.0056 ;PATH_TASK id=454 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.453269 G1 F10966.289 G3 X151.9 Y112.904 I-51.177 J-29.287 E.01602 G1 X151.448 Y113.405 E.02302 G1 X150.822 Y113.781 E.02491 G1 X150.685 Y113.869 E.00554 ;PATH_TASK id=455 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X150.53 Y113.42 Z1 F21000 G1 X150.515 Y113.426 G1 X150.472 Y113.44 G1 X150.428 Y113.453 G1 X150.384 Y113.465 G1 X150.34 Y113.476 G1 X150.296 Y113.487 G1 X150.251 Y113.496 G1 X150.206 Y113.505 G1 X150.161 Y113.513 G1 X150.116 Y113.521 G1 X150.07 Y113.527 G1 X150.024 Y113.533 G1 X149.978 Y113.538 G1 X149.931 Y113.542 G1 X149.885 Y113.545 G1 X149.838 Y113.548 G1 X149.791 Y113.55 G1 X149.743 Y113.551 G1 X149.696 Y113.551 G1 X149.664 Y113.551 G1 X149.63 Y113.551 G1 X149.556 Y113.549 G1 X149.487 Y113.545 G1 X149.426 Y113.54 G1 X149.365 Y113.534 G1 X149.304 Y113.527 G1 X149.244 Y113.519 G1 X149.185 Y113.509 G1 X149.125 Y113.498 G1 X149.067 Y113.485 G1 X149.015 Y113.472 G1 X148.968 Y113.46 G1 X148.921 Y113.447 G1 X148.875 Y113.432 G1 X148.829 Y113.417 G1 X148.784 Y113.401 G1 X148.739 Y113.384 G1 X148.695 Y113.365 G1 X148.651 Y113.346 G1 X148.607 Y113.326 G1 X148.564 Y113.304 G1 X148.522 Y113.282 G1 X148.48 Y113.259 G1 X148.439 Y113.234 G1 X148.398 Y113.209 G1 X148.358 Y113.183 G1 X148.319 Y113.156 G1 X148.28 Y113.127 G1 X148.242 Y113.098 G1 X148.205 Y113.068 G1 X148.169 Y113.037 G1 X148.134 Y113.006 G1 X148.107 Y112.981 G1 X148.082 Y112.957 G1 X148.052 Y112.926 G1 X148.022 Y112.895 G1 X147.992 Y112.863 G1 X147.964 Y112.831 G1 X147.936 Y112.798 G1 X147.909 Y112.764 G1 X147.882 Y112.73 G1 X147.857 Y112.695 G1 X147.832 Y112.66 G1 X147.808 Y112.624 G1 X147.785 Y112.588 G1 X147.762 Y112.551 G1 X147.741 Y112.513 G1 X147.72 Y112.476 G1 X147.7 Y112.437 G1 X147.681 Y112.398 G1 X147.663 Y112.359 G1 X147.646 Y112.32 G1 X147.63 Y112.28 G1 X147.615 Y112.239 G1 X147.6 Y112.199 G1 X147.587 Y112.158 G1 X147.575 Y112.116 G1 X147.563 Y112.075 G1 X147.553 Y112.033 G1 X147.543 Y111.991 G1 X147.534 Y111.949 G1 X147.526 Y111.906 G1 X147.52 Y111.864 G1 X147.332 Y111.89 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.45 G1 F11054.338 G1 X145.222 Y114 E.10102 G1 X144.646 Y114 E.01949 G1 X147.109 Y111.538 E.11789 G3 X147.118 Y111.424 I.801 J.006 E.00387 G1 X147.186 Y110.96 E.01587 G1 X147.207 Y110.864 E.00332 G1 X144.071 Y114 E.15012 G1 X143.495 Y114 E.01949 G1 X148.018 Y109.477 E.21651 G1 X147.995 Y109.476 E.00078 G1 X147.864 Y109.452 E.00449 G1 X147.599 Y109.321 E.01003 G1 X142.919 Y114 E.22401 G1 X142.343 Y114 E.01949 G1 X147.306 Y109.038 E.23756 G1 X147.255 Y108.957 E.00324 G3 X147.208 Y108.848 I.935 J-.466 E.00402 G1 X147.165 Y108.679 E.0059 G1 X147.157 Y108.611 E.00231 G1 X141.768 Y114 E.25799 G1 X141.192 Y114 E.01949 G1 X147.161 Y108.031 E.28573 G1 X147.165 Y107.82 E.00717 G1 X147.239 Y107.482 E.01172 G1 X147.187 Y107.43 E.00248 G1 X148.617 Y106 E.06847 G1 X140.616 Y114 E.383 G1 X140.041 Y114 E.01949 G1 X148.042 Y106 E.383 G1 X147.466 Y106 E.01949 G1 X141.637 Y111.828 E.27902 G1 X141.516 Y111.707 E.00581 G1 X142.415 Y110.474 E.05166 G1 X146.89 Y106 E.2142 G1 X146.314 Y106 E.01949 G1 X142.666 Y109.648 E.17466 ;PATH_TASK id=456 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X141.299 Y106.83 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.36609 G1 F12000 G1 X141.449 Y107.146 E.0094 G1 X142.125 Y107.168 E.01817 ;PATH_TASK id=457 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.39399 G1 X142.332 Y107.212 E.00618 ;PATH_TASK id=458 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.429019 G1 F11655.057 G1 X142.539 Y107.256 E.00679 ;PATH_TASK id=459 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.479266 G1 F10312.917 G1 X142.746 Y107.299 E.00768 G1 X142.887 Y107.39 E.00608 G1 X143.386 Y106.891 E.02561 G1 X142.857 Y106.891 E.01921 ;PATH_TASK id=460 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.464048 G1 F10685.599 G1 X142.624 Y106.873 E.00816 ;PATH_TASK id=461 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.429019 G1 F11655.057 G1 X142.392 Y106.856 E.00748 ;PATH_TASK id=462 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.39399 G1 F12000 G1 X142.159 Y106.838 E.0068 ;PATH_TASK id=463 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.372138 G1 X141.569 Y106.83 E.01617 G1 X141.339 Y106.83 E.00629 ;PATH_TASK id=464 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X140.401 Y106.468 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X140.749 Y106.699 E.01415 G1 X141.084 Y107.182 E.01989 G1 X141.155 Y107.504 E.01116 G1 X141.933 Y107.517 E.02633 G1 X142.351 Y107.594 E.01441 G1 X142.558 Y107.68 E.00758 G1 X142.924 Y107.951 E.0154 G1 X144.407 Y106.468 E.07102 G1 X140.441 Y106.468 E.13426 ;PATH_TASK id=465 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X139.148 Y106.624 F21000 ;WIDTH:0.561256 G1 F8681.636 G1 X139.778 Y106.635 E.02716 ;PATH_TASK id=466 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.54278 G1 F9002.523 G1 X139.961 Y106.714 E.00831 ;PATH_TASK id=467 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.505668 G1 F9724.525 G1 X140.145 Y106.794 E.00769 ;PATH_TASK id=468 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.450302 G1 F11046.143 G1 X140.328 Y106.874 E.00677 G1 X140.423 Y106.944 E.00399 G1 X140.717 Y107.371 E.01756 G1 X140.774 Y107.905 E.01819 G1 X141.964 Y107.929 E.04032 G1 X142.336 Y108.021 E.01298 G1 X142.627 Y108.224 E.01201 G1 X142.811 Y108.474 E.01052 G1 X142.857 Y108.593 E.00433 G1 X145.39 Y106.061 E.12133 G1 X140.467 Y106.061 E.16674 ;PATH_TASK id=469 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.466029 G1 F10635.576 G1 X140.209 Y106.077 E.0091 ;PATH_TASK id=470 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.498087 G1 F9886.486 G1 X139.951 Y106.093 E.00978 ;PATH_TASK id=471 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.544278 G1 F8975.636 G1 X139.589 Y106.116 E.01512 G1 X139.58 Y106.192 E.00319 G1 X139.176 Y106.596 E.0238 ;PATH_TASK id=472 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X138.253 Y107.295 F21000 ;WIDTH:0.38292 G1 F12000 G1 X138.573 Y106.954 E.01323 ;PATH_TASK id=473 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X132.879 Y106.855 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.40979 G1 F12000 G1 X133.208 Y107.332 E.0177 G1 X133.686 Y106.855 E.02061 G1 X132.919 Y106.855 E.0234 ;PATH_TASK id=474 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X131.833 Y106.468 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X132.041 Y106.605 E.00846 G1 X132.579 Y107.093 E.02456 G1 X133.038 Y107.796 E.02843 G1 X133.115 Y107.973 E.00654 G1 X134.62 Y106.468 E.07207 G1 X131.873 Y106.468 E.09301 ;PATH_TASK id=475 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X129.25 Y106.66 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.451037 G1 F11026.256 G1 X129.611 Y106.517 E.01317 G1 X130.213 Y106.45 E.02055 G1 X130.774 Y106.488 E.01906 G1 X131.482 Y106.738 E.02548 G1 X131.768 Y106.907 E.01128 G1 X132.305 Y107.394 E.02462 G1 X132.691 Y108.008 E.02461 G1 X132.874 Y108.525 E.01861 G1 X132.916 Y108.748 E.00769 G1 X135.603 Y106.061 E.12897 G1 X131.597 Y106.061 E.13595 G1 X130.896 Y106.066 E.0238 G1 X130.238 Y106.054 E.02233 G1 X129.773 Y106.063 E.01579 G1 X129.765 Y106.145 E.0028 G1 X129.279 Y106.632 E.02334 ;PATH_TASK id=476 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X128.168 Y107.632 F21000 ;WIDTH:0.38292 G1 F12000 G1 X128.713 Y107.062 E.0223 ;PATH_TASK id=477 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X123.668 Y106.902 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.631858 G1 F7640.872 G1 X123.594 Y106.902 E.00361 G1 X123.558 Y106.966 E.00361 G1 X123.594 Y107.029 E.00361 G1 X123.668 Y107.029 E.00361 G1 X123.685 Y107 E.00165 ;PATH_TASK id=478 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X123.519 Y107.782 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X124.833 Y106.468 E.06294 G1 X122.496 Y106.468 E.07914 G1 X122.997 Y106.924 E.02296 G1 X123.47 Y107.676 E.03006 G1 X123.502 Y107.746 E.00261 ;PATH_TASK id=479 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X123.29 Y108.587 F21000 G1 F11054.364 G1 X125.816 Y106.061 E.12094 G1 X121.505 Y106.061 E.14594 ;PATH_TASK id=480 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.429713 G1 F11634.152 G1 X121.237 Y106.04 E.00865 ;PATH_TASK id=481 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.379983 G1 F12000 G1 X120.969 Y106.02 E.00753 G1 X120.11 Y106.028 E.02406 G1 X119.966 Y106.028 E.00405 G1 X119.953 Y106.12 E.00261 G1 X119.554 Y106.52 E.01583 G1 X119.913 Y106.389 E.01072 G1 X120.664 Y106.333 E.02108 ;PATH_TASK id=482 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.382751 G1 X121.067 Y106.37 E.01146 ;PATH_TASK id=483 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.444611 G1 F11202.663 G1 X121.471 Y106.407 E.01354 G1 X122.158 Y106.723 E.02524 G1 X122.723 Y107.225 E.02528 G1 X123.119 Y107.882 E.0256 G1 X123.225 Y108.194 E.01101 G1 X123.283 Y108.548 E.01197 ;PATH_TASK id=484 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X122.851 Y108.596 Z1 F21000 G1 X122.85 Y108.587 G1 X122.844 Y108.541 G1 X122.837 Y108.495 G1 X122.829 Y108.45 G1 X122.82 Y108.404 G1 X122.81 Y108.359 G1 X122.799 Y108.314 G1 X122.787 Y108.27 G1 X122.774 Y108.226 G1 X122.76 Y108.182 G1 X122.745 Y108.138 G1 X122.729 Y108.095 G1 X122.712 Y108.052 G1 X122.695 Y108.01 G1 X122.676 Y107.968 G1 X122.656 Y107.926 G1 X122.635 Y107.885 G1 X122.614 Y107.844 G1 X122.591 Y107.804 G1 X122.567 Y107.764 G1 X122.543 Y107.725 G1 X122.518 Y107.687 G1 X122.492 Y107.649 G1 X122.465 Y107.611 G1 X122.437 Y107.574 G1 X122.408 Y107.538 G1 X122.379 Y107.502 G1 X122.348 Y107.467 G1 X122.317 Y107.433 G1 X122.286 Y107.399 G1 X122.253 Y107.365 G1 X122.225 Y107.338 G1 X122.197 Y107.312 G1 X122.165 Y107.282 G1 X122.132 Y107.254 G1 X122.098 Y107.225 G1 X122.064 Y107.198 G1 X122.029 Y107.171 G1 X121.993 Y107.145 G1 X121.957 Y107.12 G1 X121.921 Y107.095 G1 X121.884 Y107.072 G1 X121.846 Y107.049 G1 X121.808 Y107.027 G1 X121.77 Y107.005 G1 X121.731 Y106.985 G1 X121.691 Y106.965 G1 X121.652 Y106.946 G1 X121.611 Y106.928 G1 X121.566 Y106.909 G1 X121.516 Y106.889 G1 X121.464 Y106.87 G1 X121.413 Y106.852 G1 X121.361 Y106.836 G1 X121.308 Y106.821 G1 X121.255 Y106.807 G1 X121.202 Y106.794 G1 X121.148 Y106.782 G1 X121.093 Y106.772 G1 X121.039 Y106.763 G1 X120.984 Y106.755 G1 X120.922 Y106.747 G1 X120.854 Y106.74 G1 X120.785 Y106.735 G1 X120.715 Y106.731 G1 X120.646 Y106.729 G1 X120.596 Y106.729 G1 X120.547 Y106.729 G1 X120.497 Y106.73 G1 X120.448 Y106.732 G1 X120.4 Y106.735 G1 X120.351 Y106.739 G1 X120.303 Y106.743 G1 X120.254 Y106.749 G1 X120.206 Y106.755 G1 X120.159 Y106.762 G1 X120.111 Y106.77 G1 X120.064 Y106.779 G1 X120.017 Y106.789 G1 X119.971 Y106.8 G1 X119.924 Y106.812 G1 X119.878 Y106.825 G1 X119.833 Y106.838 G1 X119.787 Y106.853 G1 X119.742 Y106.868 G1 X119.698 Y106.885 G1 X119.653 Y106.903 G1 X119.61 Y106.921 G1 X119.566 Y106.94 G1 X119.524 Y106.961 G1 X119.481 Y106.982 G1 X119.439 Y107.004 G1 X119.398 Y107.028 G1 X119.357 Y107.052 G1 X119.317 Y107.077 G1 X119.277 Y107.103 G1 X119.238 Y107.13 G1 X119.2 Y107.157 G1 X119.162 Y107.186 G1 X119.125 Y107.216 G1 X119.088 Y107.246 G1 X119.053 Y107.277 G1 X119.018 Y107.309 G1 X118.987 Y107.338 G1 X118.956 Y107.368 G1 X118.924 Y107.401 G1 X118.893 Y107.435 G1 X118.862 Y107.469 G1 X118.832 Y107.504 G1 X118.802 Y107.539 G1 X118.774 Y107.575 G1 X118.746 Y107.612 G1 X118.72 Y107.649 G1 X118.694 Y107.687 G1 X118.668 Y107.726 G1 X118.644 Y107.765 G1 X118.621 Y107.804 G1 X118.599 Y107.844 G1 X118.577 Y107.885 G1 X118.575 Y107.888 G1 X118.261 Y107.731 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.38292 G1 F12000 G1 X118.73 Y107.179 E.0205 G1 X119.243 Y106.731 E.01924 ;PATH_TASK id=485 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X117.776 Y110.083 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.457418 G1 F10856.505 G1 X117.589 Y109.599 E.01786 G1 X117.519 Y109.186 E.01444 G1 X117.106 Y109.599 E.02012 G1 X117.296 Y109.958 E.01401 G1 X117.394 Y110.449 E.01723 G1 X117.747 Y110.11 E.01684 ;PATH_TASK id=486 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X118.302 Y110.188 F21000 ;WIDTH:0.449538 G1 F11066.918 G1 X118.127 Y109.857 E.01265 G1 X117.988 Y109.496 E.01308 G1 X117.935 Y109.229 E.00919 G1 X117.91 Y108.649 E.01962 G1 X118.029 Y108.09 E.01932 G1 X116.512 Y109.608 E.07256 G1 X116.728 Y109.779 E.00933 G1 X116.902 Y110.057 E.01108 G1 X116.985 Y110.415 E.01242 G1 X116.971 Y111.19 E.0262 G1 X116.889 Y111.516 E.01137 ;PATH_TASK id=487 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.414988 G1 F12000 G1 X116.728 Y111.744 E.00862 G1 X117.142 Y111.28 E.01923 ;PATH_TASK id=488 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F11054.364 G1 X118.014 Y110.408 E.04174 G1 X118.14 Y110.349 E.0047 G1 X118.212 Y110.359 E.00245 G1 X118.283 Y110.223 E.0052 ;PATH_TASK id=489 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X115.035 Y113.3 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.560847 G1 F8688.488 G1 X114.824 Y113.362 E.00947 ;PATH_TASK id=490 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.52336 G1 F9366.424 G1 X114.614 Y113.425 E.00878 G1 X113.994 Y113.429 E.02477 ;PATH_TASK id=491 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.502271 G1 F9796.44 G1 X113.781 Y113.36 E.00854 ;PATH_TASK id=492 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.451908 G1 F11002.783 G1 X113.568 Y113.291 E.00761 G1 X113.186 Y112.976 E.01684 G1 X113.09 Y112.81 E.00653 G1 X112.995 Y112.389 E.01468 G1 X112.997 Y112.162 E.00772 G1 X112.778 Y112.463 E.01267 G1 X112.405 Y112.832 E.01784 ;PATH_TASK id=493 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.473424 G1 F10452.882 G1 X112.024 Y113.053 E.01577 ;PATH_TASK id=494 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.520272 G1 F9427.01 G1 X111.643 Y113.275 E.01749 ;PATH_TASK id=495 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.556319 G1 F8765.126 G1 X111.612 Y113.297 E.00163 ;PATH_TASK id=496 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.5678 G1 F8573.402 G1 X111.581 Y113.319 E.00167 G1 X110.972 Y113.387 E.02671 G1 X110.311 Y113.341 E.02895 ;PATH_TASK id=497 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.557002 G1 F8753.477 G1 X110.074 Y113.229 E.01118 ;PATH_TASK id=498 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.514201 G1 F9548.453 G1 X109.837 Y113.118 E.01025 ;PATH_TASK id=499 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.450563 G1 F11039.09 G1 X109.601 Y113.006 E.00887 G1 X109.32 Y112.814 E.01153 G1 X108.85 Y112.322 E.02306 G1 X108.494 Y111.662 E.02542 G1 X108.407 Y111.381 E.00999 G1 X105.848 Y113.939 E.12265 G1 X109.842 Y113.939 E.13539 ;PATH_TASK id=500 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.4714 G1 F10502.253 G1 X109.989 Y113.918 E.00529 ;PATH_TASK id=501 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.514201 G1 F9548.453 G1 X110.136 Y113.897 E.00582 ;PATH_TASK id=502 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.56172 G1 F8673.869 G1 X110.283 Y113.875 E.0064 G1 X110.883 Y113.891 E.02589 ;PATH_TASK id=503 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.571346 G1 F8515.865 G1 X111.635 Y113.867 E.03307 ;PATH_TASK id=504 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.5711 G1 F8519.826 G1 X111.903 Y113.891 E.01179 ;PATH_TASK id=505 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.52266 G1 F9380.091 G1 X112.17 Y113.915 E.01071 ;PATH_TASK id=506 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.455756 G1 F10900.224 G1 X112.438 Y113.939 E.00922 G1 X113.485 Y113.938 E.03595 ;PATH_TASK id=507 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.468786 G1 F10566.716 G1 X113.739 Y113.922 E.00903 ;PATH_TASK id=508 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.514636 G1 F9539.648 G1 X113.994 Y113.905 E.01 G1 X114.54 Y113.904 E.02144 G1 X114.541 Y113.832 E.00285 ;PATH_TASK id=509 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.540153 G1 F9050.083 G1 X114.966 Y113.379 E.02565 ;PATH_TASK id=510 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.560011 G1 F8702.531 G1 X115.009 Y113.33 E.00282 ;PATH_TASK id=511 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X115.035 Y113.3 F21000 ;WIDTH:0.597285 G1 F8117.396 G1 X115.598 Y112.705 E.03774 ;PATH_TASK id=512 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.600076 G1 F8076.736 G1 X115.761 Y112.57 E.00983 ;PATH_TASK id=513 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.559816 G1 F8705.823 G1 X115.925 Y112.434 E.00912 ;PATH_TASK id=514 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.519555 G1 F9441.186 G1 X116.088 Y112.299 E.00841 ;PATH_TASK id=515 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.479295 G1 F10312.24 G1 X116.252 Y112.164 E.0077 ;PATH_TASK id=516 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.439035 G1 F11360.36 G1 X116.416 Y112.029 E.00699 ;PATH_TASK id=517 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.418904 G1 F11968.594 G1 X116.689 Y111.782 E.01152 ;PATH_TASK id=518 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X113.215 Y113.54 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.435134 G1 F11473.328 G1 X112.848 Y113.189 E.01655 G1 X112.751 Y113.07 E.00501 G1 X112.391 Y113.324 E.01437 G1 X111.913 Y113.54 E.0171 G1 X113.175 Y113.54 E.04115 ;PATH_TASK id=519 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X109.773 Y113.532 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F11054.364 G1 X109.345 Y113.328 E.01605 G1 X109.025 Y113.095 E.01338 G1 X108.556 Y112.603 E.02303 G1 X108.264 Y112.099 E.01971 G1 X106.831 Y113.532 E.06861 G1 X109.733 Y113.532 E.09823 ;PATH_TASK id=520 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X108.562 Y113.156 F21000 ;WIDTH:0.389168 G1 F12000 G1 X108.178 Y112.717 E.01678 G1 X107.74 Y113.156 E.01785 G1 X108.522 Y113.156 E.02252 ;PATH_TASK id=521 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X105.316 Y114.184 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.450005 G1 F11054.202 G1 X108.386 Y111.114 E.14696 G1 X108.353 Y110.967 E.00509 G1 X108.307 Y110.616 E.01197 G1 X104.74 Y114.184 E.17077 ;PATH_TASK id=522 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X104.74 Y114.389 Z1 F21000 G1 X103.722 Y112.77 G1 X103.437 Y110.162 G1 X103.258 Y110.141 G1 X103.299 Y109.792 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.495659 G1 F9939.501 G1 X103.316 Y108.837 E.03596 G1 X102.918 Y109.262 E.02191 G1 X102.553 Y109.582 E.01829 G1 X103.099 Y109.67 E.02082 G1 X103.265 Y109.771 E.00733 ;PATH_TASK id=523 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X103.772 Y109.78 Z1 F21000 G1 X103.722 Y112.77 G1 X105.095 Y112.793 G1 X106.809 Y111.339 G1 X106.842 Y109.455 G1 X106.485 Y109.655 G1 X106.451 Y109.594 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.450001 G1 F11054.31 G1 X110.046 Y106 E.17207 G1 X109.47 Y106 E.01949 G1 X106.068 Y109.401 E.16285 G1 X106.003 Y109.4 E.00219 G1 X106.012 Y108.882 E.01755 G1 X108.894 Y106 E.13796 G1 X108.318 Y106 E.01949 G1 X106.022 Y108.296 E.10992 G1 X106.032 Y107.71 E.01983 G1 X107.743 Y106 E.08189 G1 X107.167 Y106 E.01949 G1 X106.042 Y107.125 E.05385 G1 X105.977 Y106.761 E.01249 G1 X105.914 Y106.677 E.00357 G1 X106.775 Y105.816 E.04119 ;PATH_TASK id=524 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X102.534 Y106.059 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.445944 G1 F11165.588 G1 X102.956 Y106.062 E.01416 ;PATH_TASK id=525 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X104.206 Y106.082 F21000 ;WIDTH:0.491445 G1 F10032.885 G1 X105.103 Y106.08 E.03345 ;PATH_TASK id=526 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.509143 G1 F9652.041 G1 X105.215 Y106.098 E.00438 ;PATH_TASK id=527 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.548116 G1 F8907.435 G1 X105.327 Y106.115 E.00475 ;PATH_TASK id=528 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.567603 G1 F8576.612 G1 X105.438 Y106.133 E.00493 ;PATH_TASK id=529 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X104.206 Y106.082 F21000 ;WIDTH:0.473527 G1 F10450.377 G1 X104.037 Y106.063 E.00611 ;PATH_TASK id=530 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.434112 G1 F11503.316 G1 X103.867 Y106.043 E.00555 ;PATH_TASK id=531 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.404872 G1 F12000 G1 X103.698 Y106.023 E.00514 G1 X103.065 Y106.056 E.01907 ;PATH_TASK id=532 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.447022 G1 F11135.802 G1 X102.996 Y106.063 E.00232 ;PATH_TASK id=533 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.434105 G1 F11503.516 G1 X103.271 Y106.177 E.00969 ;PATH_TASK id=534 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.383555 G1 F12000 G1 X103.546 Y106.292 E.00843 G1 X103.694 Y106.428 E.00569 G1 X103.831 Y106.302 E.00528 ;PATH_TASK id=535 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.394697 G1 X103.945 Y106.236 E.00385 ;PATH_TASK id=536 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.434112 G1 F11503.316 G1 X104.058 Y106.169 E.00428 ;PATH_TASK id=537 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.453819 G1 F10951.595 G1 X104.172 Y106.102 E.0045 ;PATH_TASK id=538 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X98.362 Y106.43 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.369016 G1 F12000 G1 X97.93 Y106.43 E.01171 G1 X97.92 Y106.971 E.01467 ;PATH_TASK id=539 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.379829 G1 X97.945 Y107.038 E.00199 ;PATH_TASK id=540 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.428715 G1 F11664.241 G1 X97.969 Y107.104 E.00228 ;PATH_TASK id=541 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.477601 G1 F10352.439 G1 X97.994 Y107.171 E.00257 ;PATH_TASK id=542 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.526486 G1 F9305.868 G1 X98.018 Y107.237 E.00285 ;PATH_TASK id=543 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.575372 G1 F8451.474 G1 X98.043 Y107.304 E.00314 ;PATH_TASK id=544 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.624258 G1 F7740.774 G1 X98.067 Y107.371 E.00343 ;PATH_TASK id=545 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X98.095 Y107.305 E.00343 ;PATH_TASK id=546 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.575372 G1 F8451.474 G1 X98.122 Y107.24 E.00314 ;PATH_TASK id=547 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.526486 G1 F9305.868 G1 X98.15 Y107.175 E.00285 ;PATH_TASK id=548 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.477601 G1 F10352.439 G1 X98.177 Y107.109 E.00257 ;PATH_TASK id=549 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.428715 G1 F11664.241 G1 X98.205 Y107.044 E.00228 ;PATH_TASK id=550 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.367254 G1 F12000 G1 X98.233 Y106.978 E.00191 G1 X98.255 Y106.641 E.00911 G1 X98.344 Y106.466 E.00531 ;PATH_TASK id=551 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X98.067 Y107.371 F21000 ;WIDTH:0.6487 G1 F7428.439 G1 X98.065 Y107.782 E.02073 ;PATH_TASK id=552 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X98.651 Y108.875 F21000 ;WIDTH:0.593097 G1 F8179.19 G1 X98.279 Y108.419 E.02691 G1 X98.15 Y108.142 E.01401 ;PATH_TASK id=553 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.618443 G1 F7818.978 G1 X98.066 Y107.837 E.01511 G1 X98.038 Y108.5 E.03174 ;PATH_TASK id=554 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.595259 G1 F8147.168 G1 X98.038 Y109.787 E.05913 G1 X98.048 Y110.481 E.03184 G1 X98.194 Y109.803 E.03184 G1 X98.556 Y109.046 E.03855 G1 X98.632 Y108.91 E.00713 ;PATH_TASK id=555 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X98.048 Y110.481 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.626744 G1 F7707.803 G1 X98.063 Y110.934 E.02203 ;PATH_TASK id=556 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.642266 G1 F7508.184 G1 X98.079 Y111.388 E.02261 ;PATH_TASK id=557 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X98.882 Y113.165 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.370988 G1 F12000 G1 X98.335 Y112.564 E.02217 G1 X98.335 Y113.165 E.0164 G1 X98.842 Y113.165 E.01383 ;PATH_TASK id=558 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X100.723 Y113.542 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.430202 G1 F11619.447 G1 X101.533 Y113.545 E.02609 G1 X101.593 Y113.542 E.00193 ;PATH_TASK id=559 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X100.723 Y113.542 F21000 ;WIDTH:0.44802 G1 F11108.378 G1 X100.213 Y113.454 E.01743 G1 X99.452 Y113.122 E.02796 G1 X99.046 Y112.818 E.01709 G1 X98.597 Y112.305 E.02298 ;PATH_TASK id=560 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.470934 G1 F10513.679 G1 X98.457 Y112.061 E.01001 ;PATH_TASK id=561 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.512804 G1 F9576.842 G1 X98.317 Y111.817 E.01099 ;PATH_TASK id=562 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.554673 G1 F8793.302 G1 X98.177 Y111.573 E.01197 ;PATH_TASK id=563 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.59238 G1 F8189.859 G1 X98.145 Y111.524 E.00265 ;PATH_TASK id=564 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.625924 G1 F7718.644 G1 X98.113 Y111.476 E.00282 ;PATH_TASK id=565 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.659468 G1 F7298.702 G1 X98.081 Y111.428 E.00298 ;PATH_TASK id=566 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X98.064 Y111.486 E.00313 ;PATH_TASK id=567 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.625924 G1 F7718.644 G1 X98.047 Y111.545 E.00296 ;PATH_TASK id=568 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.59238 G1 F8189.859 G1 X98.031 Y111.603 E.00279 ;PATH_TASK id=569 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.554673 G1 F8793.302 G1 X98.01 Y111.822 E.00934 ;PATH_TASK id=570 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.512804 G1 F9576.842 G1 X97.989 Y112.04 E.00858 ;PATH_TASK id=571 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.451231 G1 F11021.018 G1 X97.968 Y112.259 E.00745 G1 X97.968 Y113.532 E.04323 G1 X100.206 Y113.532 E.07598 ;PATH_TASK id=572 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F11054.364 G1 X100.683 Y113.541 E.01617 ;PATH_TASK id=573 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X103.697 Y113.511 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.492768 G1 F10003.378 G1 X103.288 Y113.236 E.01843 G1 X103.068 Y112.997 E.01214 G1 X102.501 Y113.328 E.02457 ;PATH_TASK id=574 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.479686 G1 F10302.999 G1 X102.089 Y113.432 E.01542 ;PATH_TASK id=575 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.461547 G1 F10749.438 G1 X101.677 Y113.536 E.01478 G1 X102.35 Y113.511 E.02345 ;PATH_TASK id=576 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.492768 G1 F10003.378 G1 X103.657 Y113.511 E.04887 ;PATH_TASK id=577 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X104.835 Y113.225 F21000 ;WIDTH:0.449999 G1 F11054.365 G1 X104.286 Y113.229 E.01856 G1 X103.81 Y113.1 E.01672 G1 X103.513 Y112.857 E.01298 G1 X103.318 Y112.474 E.01456 G1 X103.296 Y112.143 E.01123 G1 X103.089 Y112.422 E.01177 G1 X102.739 Y112.693 E.01496 G1 X102.284 Y112.958 E.01783 G1 X101.579 Y113.144 E.02471 G1 X100.838 Y113.155 E.02507 G1 X100.29 Y113.054 E.01887 G1 X99.623 Y112.752 E.02477 G1 X99.352 Y112.55 E.01143 G1 X98.904 Y112.037 E.02309 G1 X98.607 Y111.384 E.02426 G1 X98.525 Y110.884 E.01717 G1 X98.527 Y110.576 E.01041 G1 X98.662 Y109.896 E.02346 G1 X98.981 Y109.266 E.02391 G1 X99.358 Y108.782 E.02078 G1 X99.436 Y108.704 E.00374 G1 X98.947 Y108.5 E.01796 G1 X98.623 Y108.048 E.01879 G1 X98.559 Y107.69 E.01231 G1 X98.602 Y106.79 E.03052 G1 X98.884 Y106.299 E.01916 G1 X99.04 Y106.133 E.00771 G1 X98.753 Y106.061 E.01001 G1 X97.561 Y106.061 E.04038 G1 X97.561 Y113.939 E.26669 G1 X104.204 Y113.939 E.22486 G1 X104.234 Y113.826 E.00396 G1 X104.807 Y113.254 E.02741 ;PATH_TASK id=578 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X105.212 Y113.005 F21000 ;WIDTH:0.38292 G1 F12000 G1 X105.759 Y112.424 E.02256 G1 X106.01 Y112.186 E.00977 ;PATH_TASK id=579 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X107.848 Y109.036 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.415032 G1 F12000 G1 X107.394 Y109.49 E.01985 G1 X107.537 Y109.701 E.00787 G1 X107.603 Y109.906 E.00668 G1 X107.813 Y109.696 E.00919 G1 X107.846 Y109.076 E.0192 ;PATH_TASK id=580 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X108.529 Y107.805 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X106.859 Y109.474 E.07993 G1 X106.972 Y109.567 E.00494 G1 X107.211 Y109.936 E.0149 G1 X107.277 Y110.271 E.01155 G1 X107.268 Y110.792 E.01764 G1 X108.134 Y109.926 E.04142 G1 X108.206 Y109.926 E.00244 G1 X108.234 Y109.08 E.02866 G1 X108.345 Y108.366 E.02445 G1 X108.516 Y107.843 E.01865 ;PATH_TASK id=581 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X108.924 Y107.259 F21000 ;WIDTH:0.38292 G1 F12000 G1 X109.418 Y106.743 E.0202 ;PATH_TASK id=582 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.402355 G1 X109.671 Y106.559 E.00935 ;PATH_TASK id=583 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.441225 G1 F11297.874 G1 X109.924 Y106.375 E.01036 ;PATH_TASK id=584 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.480095 G1 F10293.36 G1 X110.177 Y106.191 E.01137 ;PATH_TASK id=585 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.519991 G1 F9432.558 G1 X110.23 Y106.159 E.00247 ;PATH_TASK id=586 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.545704 G1 F8950.175 G1 X110.283 Y106.126 E.00261 G1 X110.785 Y106.092 E.02101 G1 X111.315 Y106.106 E.02218 ;PATH_TASK id=587 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X112.931 Y106.429 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.463704 G1 F10694.322 G1 X112.879 Y106.429 E.00184 G1 X112.852 Y106.475 E.00184 G1 X112.879 Y106.52 E.00184 G1 X112.931 Y106.52 E.00184 G1 X112.938 Y106.509 E.00044 ;PATH_TASK id=588 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X114.042 Y106.159 F21000 ;WIDTH:0.622694 G1 F7761.653 G1 X113.933 Y106.135 E.0054 ;PATH_TASK id=589 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.573352 G1 F8483.65 G1 X113.824 Y106.11 E.00494 ;PATH_TASK id=590 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.524011 G1 F9353.742 G1 X113.714 Y106.085 E.00448 ;PATH_TASK id=591 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.45166 G1 F11009.466 G1 X113.605 Y106.061 E.00381 G1 X112.052 Y106.061 E.05278 ;PATH_TASK id=592 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.469412 G1 F10551.2 G1 X111.736 Y106.08 E.01125 ;PATH_TASK id=593 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.508238 G1 F9670.821 G1 X111.419 Y106.099 E.01227 ;PATH_TASK id=594 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.535087 G1 F9143.238 G1 X111.355 Y106.107 E.00264 ;PATH_TASK id=595 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.519393 G1 F9444.402 G1 X111.681 Y106.23 E.01381 ;PATH_TASK id=596 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.452623 G1 F10983.567 G1 X112.007 Y106.353 E.01187 G1 X112.3 Y106.516 E.01143 G1 X112.73 Y106.866 E.01889 G1 X113.092 Y107.369 E.0211 G1 X113.132 Y106.946 E.01448 G1 X113.281 Y106.666 E.01079 G1 X113.644 Y106.364 E.01608 ;PATH_TASK id=597 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.47467 G1 F10422.707 G1 X113.735 Y106.318 E.00366 ;PATH_TASK id=598 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.524011 G1 F9353.742 G1 X113.825 Y106.271 E.00408 ;PATH_TASK id=599 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.573352 G1 F8483.65 G1 X113.916 Y106.224 E.0045 ;PATH_TASK id=600 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.598023 G1 F8106.607 G1 X114.007 Y106.178 E.00471 ;PATH_TASK id=601 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X114.042 Y106.159 F21000 ;WIDTH:0.647364 G1 F7444.858 G1 X114.773 Y106.163 E.03673 ;PATH_TASK id=602 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X117.169 Y106.542 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.599057 G1 F8091.531 G1 X116.081 Y106.542 E.05033 G1 X116.226 Y106.875 E.01679 G1 X116.291 Y107.421 E.02539 G1 X117.141 Y106.571 E.05559 ;PATH_TASK id=603 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X118.332 Y106.061 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X115.419 Y106.061 E.09861 ;PATH_TASK id=604 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.469307 G1 F10553.802 G1 X115.292 Y106.08 E.00455 ;PATH_TASK id=605 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.507922 G1 F9677.38 G1 X115.165 Y106.099 E.00497 ;PATH_TASK id=606 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.546537 G1 F8935.36 G1 X115.038 Y106.119 E.00538 ;PATH_TASK id=607 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.585153 G1 F8299.025 G1 X114.911 Y106.138 E.00579 ;PATH_TASK id=608 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.617065 G1 F7837.741 G1 X114.862 Y106.15 E.00242 ;PATH_TASK id=609 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.642275 G1 F7508.071 G1 X114.813 Y106.163 E.00252 ;PATH_TASK id=610 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.634392 G1 F7608.139 G1 X114.921 Y106.219 E.006 ;PATH_TASK id=611 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.593416 G1 F8174.451 G1 X115.03 Y106.275 E.00558 ;PATH_TASK id=612 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.55244 G1 F8831.85 G1 X115.138 Y106.331 E.00517 ;PATH_TASK id=613 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.511464 G1 F9604.234 G1 X115.246 Y106.387 E.00475 ;PATH_TASK id=614 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.450834 G1 F11031.752 G1 X115.354 Y106.443 E.00414 G1 X115.449 Y106.511 E.00395 G1 X115.745 Y106.93 E.0174 G1 X115.808 Y107.24 E.01072 G1 X115.789 Y108.603 E.04626 G1 X118.304 Y106.089 E.12061 ;PATH_TASK id=615 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X119.962 Y105.87 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.450005 G1 F11054.202 G1 X116.259 Y109.573 E.17726 G1 X115.712 Y109.565 E.01852 G1 X115.712 Y109.544 E.0007 G1 X119.44 Y105.816 E.17844 ;PATH_TASK id=616 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X119.44 Y105.611 Z1 F21000 G1 X118.484 Y108.094 G1 X118.469 Y108.137 G1 X118.454 Y108.181 G1 X118.44 Y108.225 G1 X118.428 Y108.269 G1 X118.416 Y108.313 G1 X118.405 Y108.358 G1 X118.395 Y108.403 G1 X118.387 Y108.448 G1 X118.379 Y108.493 G1 X118.372 Y108.539 G1 X118.366 Y108.585 G1 X118.361 Y108.631 G1 X118.357 Y108.677 G1 X118.354 Y108.723 G1 X118.352 Y108.769 G1 X118.351 Y108.815 G1 X118.351 Y108.853 G1 X118.351 Y108.89 G1 X118.352 Y108.927 G1 X118.353 Y108.965 G1 X118.355 Y109.002 G1 X118.358 Y109.04 G1 X118.523 Y110.975 G1 X118.523 Y110.977 G1 X118.324 Y110.962 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.450008 G1 F11054.12 G1 X115.103 Y114.184 E.15422 ;PATH_TASK id=617 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X120.638 Y113.514 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.501408 G1 F9814.87 G1 X119.85 Y113.439 E.03017 ;PATH_TASK id=618 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.497753 G1 F9893.741 G1 X119.524 Y113.284 E.01368 ;PATH_TASK id=619 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.455232 G1 F10914.065 G1 X119.197 Y113.128 E.0124 G1 X118.926 Y112.935 E.01142 G1 X118.531 Y112.518 E.01968 G1 X118.224 Y111.965 E.02167 G1 X118.106 Y111.468 E.01752 G1 X115.635 Y113.939 E.11982 G1 X119.027 Y113.939 E.11632 G1 X119.69 Y113.918 E.02272 G1 X120.305 Y113.92 E.02109 G1 X120.309 Y113.843 E.00265 G1 X120.61 Y113.542 E.01457 ;PATH_TASK id=620 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X119.105 Y113.532 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F11054.364 G1 X118.712 Y113.286 E.0157 G1 X118.319 Y112.905 E.01853 G1 X118.047 Y112.527 E.01576 G1 X117.907 Y112.243 E.01073 G1 X116.617 Y113.532 E.06172 G1 X119.065 Y113.532 E.08285 ;PATH_TASK id=621 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X117.838 Y112.979 F21000 ;WIDTH:0.617418 G1 F7832.926 G1 X117.766 Y112.979 E.00343 G1 X117.731 Y113.042 E.00343 G1 X117.766 Y113.104 E.00343 G1 X117.838 Y113.104 E.00343 G1 X117.854 Y113.076 E.00152 ;PATH_TASK id=622 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X128.028 Y112.484 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 M73 P83 R6 ;WIDTH:0.447609 G1 F11119.657 G1 X126.573 Y113.939 E.06924 G1 X128.895 Y113.939 E.07815 G1 X129.58 Y113.957 E.02303 ;PATH_TASK id=623 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.398795 G1 F12000 G1 X130.118 Y113.968 E.01595 G1 X130.128 Y113.879 E.00264 G1 X130.375 Y113.622 E.01055 G1 X129.683 Y113.601 E.02046 ;PATH_TASK id=624 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.433576 G1 F11519.102 G1 X128.983 Y113.398 E.02368 G1 X128.687 Y113.223 E.01117 G1 X128.34 Y112.926 E.01485 G1 X128.149 Y112.696 E.00971 G1 X128.048 Y112.519 E.00661 ;PATH_TASK id=625 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X127.971 Y113.093 F21000 ;WIDTH:0.415303 G1 F12000 G1 X127.514 Y113.55 E.02 G1 X128.476 Y113.55 E.0298 G1 X128.09 Y113.227 E.01557 G1 X127.997 Y113.123 E.00433 ;PATH_TASK id=626 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X128.104 Y112.121 F21000 ;WIDTH:0.45 G1 F11054.338 G1 X126.224 Y114 E.08998 G1 X125.648 Y114 E.01949 G1 X127.822 Y111.826 E.10407 G1 X127.748 Y111.516 E.0108 G1 X127.728 Y111.393 E.00421 G1 X127.726 Y111.347 E.00157 G1 X125.073 Y114 E.12703 G1 X124.497 Y114 E.01949 G1 X127.993 Y110.505 E.16735 G1 X127.938 Y110.413 E.00361 G1 X127.863 Y110.254 E.00595 G3 X127.821 Y110.101 I1.476 J-.494 E.00538 G1 X123.921 Y114 E.18667 G1 X123.345 Y114 E.01949 G1 X127.708 Y109.638 E.20885 G1 X127.7 Y109.596 E.00143 G1 X127.69 Y109.502 E.00319 G1 X127.688 Y109.433 E.00234 G1 X127.694 Y109.076 E.01209 G1 X122.77 Y114 E.23573 G1 X122.194 Y114 E.01949 G1 X127.811 Y108.383 E.2689 G1 X127.863 Y108.194 E.00662 G1 X127.95 Y107.984 E.00771 G1 X128.092 Y107.738 E.00962 G1 X127.986 Y107.632 E.00503 G1 X129.619 Y106 E.07817 G1 X121.618 Y114 E.383 G1 X121.043 Y114 E.01949 G1 X129.044 Y106 E.383 G1 X128.468 Y106 E.01949 G1 X122.978 Y111.49 E.2628 G2 X123.009 Y111.307 I-1.957 J-.433 E.00627 G1 X123.014 Y111.214 E.00316 G2 X123.007 Y111.098 I-.951 J-.002 E.00393 G1 X122.984 Y110.907 E.00651 G1 X127.892 Y106 E.23493 G1 X127.316 Y106 E.01949 G1 X122.887 Y110.429 E.21203 G2 X122.812 Y110.28 I-1.476 J.646 E.00565 G1 X122.86 Y110.221 E.00256 G1 X122.913 Y110.136 E.00339 G1 X122.943 Y110.076 E.00229 G1 X123.114 Y109.703 E.01388 G2 X123.159 Y109.581 I-.815 J-.373 E.00439 G1 X126.924 Y105.816 E.18021 ;PATH_TASK id=627 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X126.924 Y105.611 Z1 F21000 G1 X152.889 Y105.611 G1 X152.889 Y114.389 G1 X136.403 Y114.389 G1 X136.403 Y114.184 G1 Z.4 F720 G1 E.7 F1500 G1 F11054.338 G1 X138.021 Y112.566 E.07742 G1 X138.03 Y111.981 E.01983 G1 X136.011 Y114 E.09668 G1 X135.435 Y114 E.01949 G1 X138.04 Y111.395 E.12472 G1 X138.05 Y110.809 E.01983 G1 X134.859 Y114 E.15275 G1 X134.284 Y114 E.01949 G1 X137.933 Y110.351 E.17471 G1 X137.771 Y110.293 E.00583 G1 X137.597 Y110.111 E.00852 G1 X133.708 Y114 E.18617 G1 X133.132 Y114 E.01949 G1 X137.418 Y109.715 E.20515 G1 X137.407 Y109.667 E.00167 G3 X137.397 Y109.517 I.954 J-.136 E.0051 G1 X137.403 Y109.154 E.01228 G1 X132.557 Y114 E.232 G1 X131.981 Y114 E.01949 G1 X138.1 Y107.881 E.29293 G1 X138.104 Y107.675 E.00696 G1 X138.112 Y107.568 E.00365 G1 X138.127 Y107.484 E.00287 G1 X138.263 Y107.161 E.01186 G1 X138.354 Y107.077 E.0042 G1 X138.356 Y107.05 E.00092 G1 X139.406 Y106 E.05028 G1 X131.405 Y114 E.383 G1 X130.829 Y114 E.01949 G1 X138.83 Y106 E.383 G1 X138.255 Y106 E.01949 G1 X132.753 Y111.501 E.26334 G1 X132.822 Y111.27 E.00816 G1 X132.851 Y111.142 E.00445 G1 X132.903 Y110.776 E.0125 G1 X137.679 Y106 E.22864 G1 X137.103 Y106 E.01949 G1 X132.955 Y110.148 E.19858 G1 X132.966 Y109.893 E.00864 G1 X132.966 Y109.825 E.00229 G1 X132.956 Y109.572 E.00859 G1 X136.711 Y105.816 E.17976 ;PATH_TASK id=628 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X136.711 Y105.611 Z1 F21000 G1 X138.396 Y113.339 G1 X139.825 Y113.363 G1 X140.192 Y112.861 G1 X140.391 Y112.588 G1 X140.631 Y112.763 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.38292 G1 F12000 G1 X141.405 Y111.859 E.03365 ;PATH_TASK id=629 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X138.955 Y113.869 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.590768 G1 F8213.958 G1 X139.186 Y113.871 E.01052 ;PATH_TASK id=630 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X137.871 Y113.523 F21000 ;WIDTH:0.3928 G1 F12000 G1 X137.805 Y113.561 E.0022 G1 X137.871 Y113.599 E.0022 G1 X137.873 Y113.596 E.00011 ;PATH_TASK id=631 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X136.935 Y113.939 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X138.348 Y113.939 E.04781 ;PATH_TASK id=632 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.468186 G1 F10581.615 G1 X138.521 Y113.921 E.00613 ;PATH_TASK id=633 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.50456 G1 F9747.866 G1 X138.693 Y113.903 E.00666 ;PATH_TASK id=634 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.540934 G1 F9035.905 G1 X138.866 Y113.885 E.00718 ;PATH_TASK id=635 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.574944 G1 F8458.265 G1 X138.955 Y113.869 E.00402 ;PATH_TASK id=636 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.567307 G1 F8581.457 G1 X138.771 Y113.784 E.00883 ;PATH_TASK id=637 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.520384 G1 F9424.804 G1 X138.588 Y113.699 E.00804 ;PATH_TASK id=638 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.453815 G1 F10951.722 G1 X138.404 Y113.614 E.00692 G1 X138.153 Y113.335 E.01285 G1 X138.016 Y113.116 E.00882 G1 X137.976 Y112.898 E.00754 G1 X136.964 Y113.911 E.04893 ;PATH_TASK id=639 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X145.571 Y113.939 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F11054.364 G1 X148.788 Y113.937 E.10889 G1 X148.856 Y113.913 E.00246 G1 X148.156 Y113.578 E.02626 G1 X147.599 Y113.083 E.02525 G1 X147.225 Y112.455 E.02473 G1 X147.185 Y112.325 E.0046 G1 X145.599 Y113.911 E.07591 ;PATH_TASK id=640 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X146.548 Y113.535 F21000 ;WIDTH:0.444989 G1 F11192.108 G1 X147.494 Y113.535 E.03163 G1 X147.207 Y113.233 E.01391 G1 X147.076 Y113.006 E.00876 G1 X146.576 Y113.507 E.02365 ;PATH_TASK id=641 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X147.563 Y107.273 Z1 F21000 G1 X149.007 Y106.454 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.444124 G1 F11216.239 G1 X151.537 Y106.475 E.08439 ;PATH_TASK id=642 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.4851 G1 F10176.862 G1 X151.741 Y106.493 E.00755 ;PATH_TASK id=643 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.504599 G1 F9747.031 G1 X151.946 Y106.511 E.00788 ;PATH_TASK id=644 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X148.068 Y106.836 Z1 F21000 G1 Z.4 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F11054.364 G1 X151.529 Y106.89 E.11717 G1 X151.893 Y106.972 E.0126 G1 X152.304 Y107.27 E.0172 G1 X152.396 Y107.404 E.0055 G1 X152.439 Y107.164 E.00825 G1 X152.439 Y106.061 E.03735 G1 X148.761 Y106.061 E.1245 G1 X148.729 Y106.176 E.00405 G1 X148.097 Y106.808 E.03026 ;PATH_TASK id=645 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X147.325 Y107.43 F21000 ;WIDTH:0.38292 G1 F12000 G1 X147.565 Y107.164 E.01011 ;PATH_TASK id=646 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X147.563 Y107.273 Z1 F21000 G1 X142.473 Y109.126 G1 X140.686 Y109.81 G1 X140.733 Y109.796 G1 Z.4 F720 G1 E.7 F1500 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.537622 G1 F9096.384 G1 X139.931 Y110.91 E.05645 G1 X139.95 Y109.783 E.04637 G1 X140.693 Y109.796 E.03055 ;PATH_TASK id=647 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1 F720 G1 X140.683 Y109.798 Z1 F21000 G1 X140.24 Y109.78 G1 X137.783 Y109.697 G1 X132.57 Y109.52 G1 X130.589 Y109.509 G1 X130.498 Y109.45 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.555153 G1 F8785.065 G1 X130.376 Y109.551 E.00677 G1 X130.184 Y109.554 E.00817 G1 X130.075 Y109.45 E.00637 ;PATH_TASK id=648 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.563022 G1 F8652.149 G1 X130.029 Y109.171 E.01224 G1 X130.075 Y108.887 E.01247 G1 X130.188 Y108.756 E.00744 G1 X130.344 Y108.752 E.00675 G1 X130.473 Y108.88 E.00787 G1 X130.548 Y109.168 E.01287 ;PATH_TASK id=649 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X130.545 Y109.299 E.00566 ;PATH_TASK id=647 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.555153 G1 F8785.065 G1 X130.51 Y109.412 E.00503 ;PATH_TASK id=650 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T3000 G1 X130.616 Y109.459 F21000 G1 X130.587 Y109.512 G1 X130.587 Y109.512 G1 X130.905 Y109.723 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X130.686 Y109.943 E.0105 G1 X130.439 Y110.046 E.00904 G1 X130.132 Y110.05 E.01041 G1 X129.879 Y109.951 E.0092 G1 X129.688 Y109.765 E.00902 G1 X129.564 Y109.483 E.01042 G1 X129.544 Y109.177 E.01039 G1 X129.622 Y108.691 E.01664 G1 X129.787 Y108.446 E.01001 G1 X130.014 Y108.286 E.00941 G1 X130.261 Y108.238 E.00852 G1 X130.541 Y108.298 E.00969 G1 X130.779 Y108.463 E.00979 G1 X130.942 Y108.71 E.01003 G1 X131.002 Y108.938 E.00796 G1 X131.019 Y109.453 E.01744 G1 X130.921 Y109.687 E.00859 ;PATH_TASK id=651 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1 F720 G1 X130.597 Y109.496 Z1 F21000 G1 X130.091 Y109.632 G1 X128.08 Y109.501 G1 X122.849 Y109.16 G1 X120.256 Y109.076 G1 X120.377 Y108.998 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.588749 G1 F8244.341 G1 X120.327 Y108.911 E.00458 G1 X120.366 Y108.682 E.01052 G1 X120.541 Y108.577 E.0093 G1 X120.69 Y108.595 E.0068 ;PATH_TASK id=652 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.588338 G1 F8250.553 G1 X120.837 Y108.683 E.00776 G1 X120.884 Y108.896 E.00989 ;PATH_TASK id=653 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X120.831 Y109.053 E.00751 G1 X120.661 Y109.136 E.00862 ;PATH_TASK id=651 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.588749 G1 F8244.341 G1 X120.422 Y109.075 E.01119 G1 X120.397 Y109.033 E.00221 ;PATH_TASK id=654 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T3000 G1 X120.296 Y109.127 F21000 G1 X120.254 Y109.072 G1 X120.25 Y109.065 G1 X119.921 Y109.261 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X119.826 Y108.987 E.00982 G1 X119.838 Y108.651 E.01138 G1 X119.947 Y108.396 E.00937 G1 X120.146 Y108.199 E.00949 G1 X120.508 Y108.078 E.01291 G1 X120.909 Y108.128 E.01369 G1 X121.161 Y108.28 E.00996 G1 X121.317 Y108.5 E.00913 G1 X121.395 Y108.816 E.01102 G1 X121.356 Y109.136 E.0109 G1 X121.216 Y109.384 E.00965 G1 X120.984 Y109.565 E.00992 G1 X120.704 Y109.64 E.00982 G1 X120.376 Y109.611 E.01115 G1 X120.111 Y109.476 E.01006 G1 X119.948 Y109.291 E.00837 ;PATH_TASK id=655 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1 F720 G1 X120.26 Y109.081 Z1 F21000 G1 X120.775 Y111.128 G1 X120.762 Y111.13 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.359537 G1 F10200 G1 X120.703 Y111.03 E.00305 ;PATH_TASK id=656 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.362069 G1 X120.506 Y110.994 E.00532 G1 X120.393 Y111.079 E.00376 G1 X120.391 Y111.208 E.00343 G1 X120.498 Y111.307 E.00388 G1 X120.692 Y111.293 E.00516 ;PATH_TASK id=657 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.359537 G1 X120.767 Y111.19 E.00334 G1 X120.762 Y111.13 E.00159 ;PATH_TASK id=658 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T3000 G1 X120.775 Y111.128 F21000 G1 X120.381 Y111.072 G1 X120.037 Y110.909 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X120.185 Y110.722 E.00806 G1 X120.482 Y110.606 E.0108 G1 X120.83 Y110.649 E.01187 G1 X121.024 Y110.788 E.00808 G1 X121.081 Y110.89 E.00396 G1 X121.155 Y111.24 E.01211 G1 X121.082 Y111.447 E.00744 G1 X120.899 Y111.628 E.0087 G1 X120.667 Y111.707 E.00829 G1 X120.382 Y111.684 E.00968 G1 X120.175 Y111.565 E.00807 G1 X120.028 Y111.363 E.00846 G1 X119.987 Y111.133 E.00791 G1 X120.028 Y110.948 E.00642 ;PATH_TASK id=659 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1 F720 G1 X120.378 Y111.08 Z1 F21000 G1 X118.524 Y110.963 G1 X114.804 Y112.958 G1 X113.43 Y112.935 G1 X112.998 Y111.017 G1 X110.985 Y111.135 G1 X110.918 Y111.038 G1 Z.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.567997 G1 F8570.172 G1 X110.806 Y111.006 E.00509 G1 X110.69 Y110.745 E.01247 ;PATH_TASK id=660 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.574956 G1 F8458.074 G1 X110.616 Y110.204 E.02415 ;PATH_TASK id=661 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.583489 G1 F8324.561 G1 X110.63 Y109.375 E.03731 G1 X110.689 Y108.83 E.02464 ;PATH_TASK id=662 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.577714 G1 F8414.456 G1 X110.839 Y108.465 E.01753 G1 X110.926 Y108.416 E.00445 G1 X111.031 Y108.522 E.00663 G1 X111.118 Y108.832 E.01432 ;PATH_TASK id=663 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.583489 G1 F8324.561 G1 X111.17 Y109.388 E.02511 ;PATH_TASK id=664 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 G1 X111.148 Y110.219 E.03736 ;PATH_TASK id=665 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.574956 G1 F8458.074 G1 X111.068 Y110.745 E.02355 ;PATH_TASK id=659 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 ;WIDTH:0.567997 G1 F8570.172 G1 X110.936 Y111.002 E.0126 ;PATH_TASK id=666 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000 M204 T3000 G1 X111.037 Y111.086 F21000 G1 X110.982 Y111.138 G1 X110.982 Y111.138 G1 X111.189 Y111.458 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X110.972 Y111.537 E.00779 G1 X110.705 Y111.517 E.00909 G1 X110.492 Y111.397 E.00827 G1 X110.302 Y111.154 E.01043 G1 X110.222 Y110.884 E.00954 G1 X110.138 Y110.359 E.01799 G1 X110.12 Y109.857 E.017 G1 X110.135 Y109.352 E.01711 G1 X110.198 Y108.786 E.01929 G1 X110.351 Y108.282 E.01782 G1 X110.55 Y108.042 E.01053 G1 X110.836 Y107.918 E.01055 G1 X111.155 Y107.962 E.0109 G1 X111.37 Y108.13 E.00924 G1 X111.525 Y108.39 E.01025 G1 X111.632 Y108.876 E.01684 G1 X111.664 Y109.728 E.02886 G1 X111.638 Y110.252 E.01778 G1 X111.551 Y110.81 E.0191 G1 X111.381 Y111.262 E.01636 G1 X111.217 Y111.429 E.00792 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 M106 S245 ;LAYER_CHANGE ;Z:0.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;0.6 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;0.6 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=667 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T7000 M486 S0 G1 Z1.2 F720 G1 X110.992 Y111.13 Z1.2 F21000 G1 X108.674 Y110.455 G1 X105.095 Y112.793 G1 X103.722 Y112.77 G1 X103.543 Y106.54 G1 X102.394 Y106.504 G1 X99.03 Y106.447 G1 X99.024 Y106.77 G1 X99.055 Y106.771 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall G1 F10200 G1 X99.001 Y106.856 E.00342 G1 X98.977 Y107.014 E.00542 G1 X98.966 Y107.69 E.02288 G1 X99.011 Y107.932 E.00834 G1 X99.198 Y108.18 E.01052 G1 X99.504 Y108.306 E.01119 G1 X100.454 Y108.326 E.03217 G1 X100.132 Y108.598 E.01428 G1 X99.674 Y109.039 E.02151 G1 X99.261 Y109.573 E.02284 G1 X98.993 Y110.199 E.02305 G1 X98.928 Y110.824 E.02126 G1 X99.05 Y111.436 E.02114 G1 X99.348 Y111.964 E.02052 G1 X99.803 Y112.387 E.02104 G1 X100.367 Y112.654 E.02111 G1 X101.013 Y112.763 E.02219 G1 X101.668 Y112.72 E.02221 G1 X102.291 Y112.511 E.02223 G1 X102.792 Y112.144 E.02102 G1 X103.15 Y111.649 E.02068 G1 X103.319 Y111.178 E.01695 ;PATH_TASK id=668 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.432545 G1 X103.383 Y110.75 E.01402 ;PATH_TASK id=669 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.424763 G1 X103.328 Y110.508 E.00788 ;PATH_TASK id=670 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X103.273 Y110.266 E.0084 G1 X102.937 Y110.062 E.0133 G1 X102.162 Y109.966 E.02646 G1 X101.939 Y110.048 E.00802 ;PATH_TASK id=671 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.417377 G1 X101.717 Y110.13 E.00738 ;PATH_TASK id=672 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.388451 G1 X101.657 Y110.185 E.00233 ;PATH_TASK id=673 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.425443 G1 X101.569 Y110.329 E.00538 ;PATH_TASK id=674 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.462435 G1 X101.48 Y110.473 E.0059 ;PATH_TASK id=675 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.489381 G1 F10079.267 G1 X101.442 Y110.626 E.00583 ;PATH_TASK id=676 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.516327 G1 F9505.562 G1 X101.403 Y110.778 E.00618 G1 X101.311 Y110.881 E.00545 G1 X101.053 Y110.895 E.01016 G1 X100.927 Y110.81 E.00601 G1 X100.922 Y110.664 E.00573 G1 X101.022 Y110.479 E.0083 ;PATH_TASK id=677 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.489381 G1 F10079.267 G1 X101.123 Y110.293 E.00783 ;PATH_TASK id=678 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.462435 G1 F10200 G1 X101.31 Y110.081 E.00987 ;PATH_TASK id=679 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.423595 G1 X101.497 Y109.869 E.00896 ;PATH_TASK id=680 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.417377 G1 X101.756 Y109.672 E.01013 ;PATH_TASK id=681 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X102.015 Y109.475 E.01101 G1 X102.613 Y108.96 E.02671 G1 X102.999 Y108.556 E.01892 G1 X103.37 Y107.988 E.02295 ;PATH_TASK id=682 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.492498 G1 F10009.404 G1 X103.429 Y107.888 E.00436 ;PATH_TASK id=683 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.534996 G1 F9144.94 G1 X103.487 Y107.787 E.00477 ;PATH_TASK id=684 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.577494 G1 F8417.924 G1 X103.545 Y107.686 E.00518 ;PATH_TASK id=685 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.619992 G1 F7797.99 G1 X103.604 Y107.585 E.00559 ;PATH_TASK id=686 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.66249 G1 F7263.102 G1 X103.662 Y107.484 E.00601 G1 X103.682 Y107.6 E.00604 ;PATH_TASK id=687 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.619992 G1 F7797.99 G1 X103.701 Y107.715 E.00563 ;PATH_TASK id=688 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.577494 G1 F8417.924 G1 X103.72 Y107.831 E.00521 ;PATH_TASK id=689 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.534996 G1 F9144.94 G1 X103.74 Y107.947 E.0048 ;PATH_TASK id=690 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.492498 G1 F10009.404 G1 X103.759 Y108.063 E.00438 ;PATH_TASK id=691 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X103.724 Y110.107 E.06921 G1 X103.733 Y110.391 E.00961 ;PATH_TASK id=692 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.422882 G1 X103.741 Y110.674 E.00897 ;PATH_TASK id=693 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.432545 G1 X103.713 Y111.254 E.01879 ;PATH_TASK id=694 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X103.696 Y111.754 E.01695 G1 X103.704 Y112.351 E.0202 G1 X103.776 Y112.527 E.00646 G1 X104.026 Y112.758 E.01151 G1 X104.289 Y112.822 E.00914 G1 X104.752 Y112.83 E.0157 G1 X105.054 Y112.756 E.01049 G1 X105.26 Y112.574 E.00933 G1 X105.621 Y112.118 E.01969 G1 X106.13 Y111.726 E.02174 G1 X106.632 Y111.448 E.01943 G1 X106.778 Y111.276 E.00763 G1 X106.858 Y110.999 E.00976 G1 X106.867 Y110.491 E.0172 G1 X106.839 Y110.095 E.01341 G1 X106.71 Y109.875 E.00864 G1 X106.529 Y109.74 E.00765 G1 X106.017 Y109.728 E.01732 G1 X105.649 Y109.887 E.01358 G1 X105.693 Y107.288 E.08798 G1 X105.654 Y106.894 E.0134 G1 X105.462 Y106.637 E.01086 G1 X105.096 Y106.507 E.01314 G1 X104.386 Y106.495 E.02404 G1 X104.019 Y106.618 E.01308 G1 X103.878 Y106.767 E.00696 ;PATH_TASK id=695 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.496446 G1 F9922.258 G1 X103.829 Y106.849 E.00359 ;PATH_TASK id=696 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.542893 G1 F9000.495 G1 X103.78 Y106.93 E.00396 ;PATH_TASK id=697 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.58934 G1 F8235.435 G1 X103.731 Y107.012 E.00433 ;PATH_TASK id=698 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.635786 G1 F7590.248 G1 X103.682 Y107.094 E.0047 G1 X103.636 Y107.011 E.0047 ;PATH_TASK id=699 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.58934 G1 F8235.435 G1 X103.59 Y106.927 E.00433 ;PATH_TASK id=700 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.542893 G1 F9000.495 G1 X103.544 Y106.844 E.00396 ;PATH_TASK id=701 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.496446 G1 F9922.258 G1 X103.498 Y106.76 E.00359 ;PATH_TASK id=702 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X103.362 Y106.606 E.00696 G1 X102.989 Y106.471 E.01341 G1 X102.48 Y106.463 E.01725 ;PATH_TASK id=703 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.499426 G1 F9857.482 G1 X102.38 Y106.436 E.00391 ;PATH_TASK id=704 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.548853 G1 F8894.459 G1 X102.281 Y106.41 E.00433 ;PATH_TASK id=705 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.59828 G1 F8102.852 G1 X102.181 Y106.384 E.00476 ;PATH_TASK id=706 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.647707 G1 F7440.636 G1 X102.082 Y106.357 E.00518 ;PATH_TASK id=707 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X99.476 Y106.324 E.13103 ;PATH_TASK id=708 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.626588 G1 F7709.863 G1 X99.404 Y106.383 E.00454 ;PATH_TASK id=709 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.582441 G1 F8340.736 G1 X99.332 Y106.443 E.00419 ;PATH_TASK id=710 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.538294 G1 F9084.055 G1 X99.26 Y106.503 E.00385 ;PATH_TASK id=711 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.494147 G1 F9972.824 G1 X99.188 Y106.562 E.00351 ;PATH_TASK id=667 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X99.077 Y106.737 E.00701 ;PATH_TASK id=712 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T3000 G1 X99.025 Y106.736 F21000 G1 X99.03 Y106.447 G1 X99.597 Y106.457 G1 X99.591 Y106.842 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X99.469 Y106.887 E.0044 G1 X99.406 Y107.021 E.00503 G1 X99.408 Y107.769 E.02532 G1 X99.532 Y107.877 E.00555 G1 X101.58 Y107.916 E.06935 G1 X101.488 Y108.015 E.00458 G1 X100.434 Y108.902 E.04661 G1 X100.022 Y109.292 E.01922 G1 X99.671 Y109.721 E.01874 G1 X99.433 Y110.208 E.01838 G1 X99.352 Y110.707 E.0171 G1 X99.416 Y111.189 E.01644 G1 X99.622 Y111.619 E.01614 G1 X99.957 Y111.974 E.01655 G1 X100.448 Y112.233 E.01877 G1 X100.956 Y112.331 E.01752 G1 X101.505 Y112.315 E.01859 G1 X102.006 Y112.176 E.01759 G1 X102.436 Y111.9 E.0173 G1 X102.75 Y111.498 E.01726 G1 X102.927 Y111.03 E.01694 G1 X102.985 Y110.687 E.01176 G1 X102.945 Y110.542 E.00511 G1 X102.845 Y110.481 E.00397 G1 X102.111 Y110.392 E.02503 G1 X101.953 Y110.451 E.00569 G1 X101.844 Y110.941 E.01698 G1 X101.707 Y111.168 E.00899 G1 X101.499 Y111.314 E.00858 G1 X101.19 Y111.379 E.01069 G1 X100.87 Y111.336 E.01092 G1 X100.649 Y111.209 E.00864 G1 X100.484 Y110.99 E.00929 G1 X100.434 Y110.76 E.00795 G1 X100.49 Y110.464 E.01019 G1 X100.708 Y110.097 E.01446 G1 X101.119 Y109.673 E.02001 G1 X102.241 Y108.726 E.04968 G1 X102.627 Y108.337 E.01854 G1 X102.948 Y107.877 E.01898 G1 X103.129 Y107.412 E.01688 G1 X103.161 Y107.096 E.01076 G1 X103.134 Y106.986 E.00383 G1 X102.982 Y106.9 E.00591 G1 X99.631 Y106.843 E.11345 ;PATH_TASK id=713 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X99.637 Y106.457 Z1.2 F21000 G1 X105.663 Y106.56 G1 X105.951 Y110 G1 X106.069 Y109.928 G1 X106.187 Y110.121 G1 Z.6 F720 G1 E.7 F1500 G1 F10200 G1 X105.696 Y110.334 E.01813 G1 X105.211 Y110.607 E.01884 G1 X105.267 Y107.121 E.11802 G1 X105.198 Y106.974 E.00549 G1 X105.089 Y106.936 E.00392 G1 X104.389 Y106.924 E.02369 G1 X104.276 Y106.96 E.004 G1 X104.204 Y107.103 E.00542 G1 X104.117 Y112.208 E.17284 G1 X104.16 Y112.329 E.00435 G1 X104.296 Y112.394 E.00508 G1 X104.849 Y112.379 E.01875 G1 X105.197 Y111.924 E.01939 G1 X105.703 Y111.494 E.0225 G1 X106.329 Y111.136 E.0244 G1 X106.426 Y111.011 E.00536 G1 X106.442 Y110.291 E.02436 G1 X106.382 Y110.153 E.0051 G1 X106.227 Y110.127 E.00531 ;PATH_TASK id=714 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X106.095 Y109.912 Z1.2 F21000 G1 X105.663 Y106.56 G1 X104.95 Y106.548 G1 X103.844 Y106.546 G1 X103.83 Y107.098 G1 X103.682 Y107.094 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.66249 G1 F7263.102 G1 X103.662 Y107.484 E.02012 ;PATH_TASK id=715 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X103.819 Y107.493 Z1.2 F21000 G1 X103.844 Y106.546 G1 X104.95 Y106.548 G1 X105.663 Y106.56 G1 X106.842 Y109.455 G1 X106.83 Y110.155 G1 X109.705 Y112.55 G1 X109.691 Y112.569 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F10200 G1 X109.77 Y112.636 E.0035 G1 X110.361 Y112.873 E.02154 G1 X111.036 Y112.925 E.02292 G1 X111.682 Y112.786 E.02237 G1 X112.206 Y112.476 E.0206 G1 X112.631 Y111.999 E.02162 G1 X112.926 Y111.406 E.02242 G1 X113.071 Y110.778 E.02182 ;PATH_TASK id=716 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.414668 G1 F10140 G1 F10200 G1 X113.129 Y110.122 E.02036 ;PATH_TASK id=717 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.383002 G1 F10080 G1 X113.141 Y109.454 E.01889 ;PATH_TASK id=718 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.409139 G1 F10020 G1 X113.114 Y108.862 E.01805 ;PATH_TASK id=719 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10080 G1 X113.017 Y108.241 E.02127 G1 F10200 G1 X112.779 Y107.632 E.02213 G1 X112.387 Y107.103 E.02229 G1 X111.876 Y106.739 E.02124 G1 X111.325 Y106.559 E.01962 G1 X110.819 Y106.527 E.01716 G1 X110.174 Y106.642 E.02218 G1 X109.641 Y106.929 E.02049 G1 X109.208 Y107.379 E.02114 G1 X108.884 Y107.981 E.02314 G1 X108.715 Y108.576 E.02094 G1 X108.639 Y109.118 E.01853 G1 X108.609 Y109.743 E.02118 G1 X108.627 Y110.391 E.02194 ;PATH_TASK id=715 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X108.717 Y111.013 E.02128 G1 X108.92 Y111.629 E.02194 G1 X109.293 Y112.232 E.02399 G1 X109.661 Y112.543 E.01632 ;PATH_TASK id=720 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T3000 G1 X109.672 Y112.527 F21000 G1 X109.708 Y112.552 G1 X109.717 Y112.558 G1 X109.736 Y112.57 G1 X109.949 Y112.246 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X110.409 Y112.447 E.01699 G1 X110.935 Y112.505 E.01791 G1 X111.429 Y112.424 E.01694 G1 X111.874 Y112.199 E.01688 G1 X112.236 Y111.824 E.01764 G1 X112.498 Y111.332 E.01887 G1 X112.658 Y110.757 E.0202 G1 F9960 G1 X112.733 Y110.131 E.02134 G1 F9720 G1 X112.747 Y109.494 E.02157 G1 X112.715 Y108.953 E.01834 G1 F9900 G1 X112.621 Y108.415 E.01849 G1 F10200 G1 X112.444 Y107.912 E.01805 G1 X112.16 Y107.481 E.01747 G1 X111.78 Y107.17 E.01662 G1 X111.328 Y106.996 E.01639 G1 X110.918 Y106.951 E.01396 G1 X110.404 Y107.015 E.01753 G1 X109.937 Y107.239 E.01753 G1 X109.58 Y107.591 E.01697 G1 X109.311 Y108.064 E.01842 G1 X109.145 Y108.608 E.01925 G1 X109.064 Y109.178 E.01949 G1 X109.037 Y109.762 E.01979 G1 X109.049 Y110.28 E.01754 G1 X109.12 Y110.858 E.01971 G1 X109.278 Y111.382 E.01853 G1 X109.551 Y111.876 E.0191 G1 X109.919 Y112.219 E.01703 ;PATH_TASK id=721 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X109.696 Y112.544 Z1.2 F21000 G1 X109.708 Y112.552 G1 X109.74 Y112.573 G1 X109.773 Y112.594 G1 X109.81 Y112.616 G1 X109.848 Y112.637 G1 X109.866 Y112.647 G1 X109.887 Y112.659 G1 X109.921 Y112.676 G1 X109.957 Y112.694 G1 X109.993 Y112.711 G1 X110.03 Y112.727 G1 X110.067 Y112.742 G1 X110.104 Y112.757 G1 X110.142 Y112.771 G1 X110.184 Y112.785 G1 X110.231 Y112.8 G1 X110.279 Y112.813 G1 X110.327 Y112.826 G1 X110.375 Y112.837 G1 X110.424 Y112.848 G1 X110.472 Y112.857 G1 X110.522 Y112.865 G1 X110.571 Y112.872 G1 X110.621 Y112.877 G1 X110.67 Y112.882 G1 X110.721 Y112.886 G1 X110.777 Y112.889 G1 X110.837 Y112.891 G1 X114.804 Y112.958 G1 X116.518 Y111.504 G1 X116.55 Y109.62 G1 X116.207 Y109.83 G1 X116.274 Y109.94 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall G1 F10200 G1 X116.228 Y109.9 E.00206 G1 X115.726 Y109.893 E.01698 G1 X115.358 Y110.052 E.01358 G1 X115.405 Y107.293 E.09339 G1 X115.358 Y107.048 E.00845 G1 X115.164 Y106.797 E.01073 G1 X114.805 Y106.673 E.01289 G1 X114.105 Y106.661 E.02369 G1 X113.795 Y106.739 E.0108 G1 X113.547 Y107 E.0122 G1 X113.484 Y107.261 E.00908 G1 X113.466 Y108.307 E.03543 G1 X113.479 Y108.92 E.02075 ;PATH_TASK id=722 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.403263 G1 X113.48 Y109.446 E.01576 ;PATH_TASK id=723 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.38482 G1 X113.467 Y110.199 E.0214 ;PATH_TASK id=724 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.423161 G1 X113.435 Y110.918 E.02277 ;PATH_TASK id=725 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X113.412 Y111.475 E.01885 G1 X113.397 Y112.366 E.03018 G1 X113.466 Y112.658 E.01014 G1 X113.717 Y112.914 E.01214 G1 X113.997 Y112.987 E.0098 G1 X114.461 Y112.995 E.0157 ;PATH_TASK id=721 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X114.762 Y112.922 E.01049 G1 X114.969 Y112.739 E.00933 G1 X115.154 Y112.479 E.01079 G1 X115.486 Y112.142 E.01604 G1 X115.909 Y111.845 E.01747 G1 X116.35 Y111.606 E.017 G1 X116.494 Y111.429 E.00771 G1 X116.565 Y111.187 E.00855 G1 X116.576 Y110.398 E.02669 G1 X116.473 Y110.109 E.0104 G1 X116.304 Y109.966 E.00748 ;PATH_TASK id=726 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T3000 G1 X116.217 Y109.824 F21000 G1 X115.894 Y110.022 G1 X116.062 Y110.297 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X115.896 Y110.286 E.00564 G1 X115.404 Y110.499 E.01813 G1 X114.92 Y110.772 E.01883 G1 X114.976 Y107.286 E.11801 G1 X114.905 Y107.138 E.00556 G1 X114.797 Y107.101 E.00384 G1 X114.094 Y107.089 E.02379 G1 X113.944 Y107.169 E.00579 G1 X113.912 Y107.268 E.0035 G1 X113.826 Y112.395 E.17356 G1 X113.921 Y112.537 E.00577 G1 X114.558 Y112.545 E.02157 G1 X114.906 Y112.089 E.01938 G1 X115.198 Y111.824 E.01336 G1 X115.608 Y111.53 E.01707 G1 X116.074 Y111.278 E.01794 G1 X116.138 Y111.153 E.00475 G1 X116.148 Y110.428 E.02455 G1 X116.084 Y110.331 E.00393 ;PATH_TASK id=727 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X115.895 Y110.021 Z1.2 F21000 G1 X118.74 Y110.285 G1 X118.723 Y110.314 G1 X118.704 Y110.348 G1 X118.687 Y110.383 G1 X118.67 Y110.418 G1 X118.654 Y110.453 G1 X118.639 Y110.489 G1 X118.625 Y110.525 G1 X118.611 Y110.561 G1 X118.599 Y110.598 G1 X118.587 Y110.635 G1 X118.577 Y110.672 G1 X118.567 Y110.709 G1 X118.558 Y110.747 G1 X118.55 Y110.785 G1 X118.543 Y110.823 G1 X118.537 Y110.861 G1 X118.532 Y110.899 G1 X118.527 Y110.937 G1 X118.523 Y110.975 G1 X118.52 Y111.014 G1 X118.518 Y111.057 G1 X118.517 Y111.103 G1 X118.516 Y111.143 G1 X118.517 Y111.183 G1 X118.518 Y111.224 G1 X118.52 Y111.266 G1 X118.523 Y111.307 G1 X118.527 Y111.349 G1 X118.532 Y111.39 G1 X118.538 Y111.431 G1 X118.544 Y111.472 G1 X118.552 Y111.513 G1 X118.56 Y111.553 G1 X118.57 Y111.594 G1 X118.58 Y111.634 G1 X118.591 Y111.674 G1 X118.603 Y111.714 G1 X118.616 Y111.753 G1 X118.63 Y111.792 G1 X118.645 Y111.831 G1 X118.661 Y111.87 G1 X118.677 Y111.908 G1 X118.695 Y111.945 G1 X118.713 Y111.982 G1 X118.733 Y112.019 G1 X118.753 Y112.055 G1 X118.774 Y112.091 G1 X118.795 Y112.127 G1 X118.818 Y112.162 G1 X118.841 Y112.196 G1 X118.865 Y112.23 G1 X118.89 Y112.263 G1 X118.915 Y112.296 G1 X118.942 Y112.328 G1 X118.969 Y112.36 G1 X118.996 Y112.391 G1 X119.024 Y112.422 G1 X119.053 Y112.452 G1 X119.087 Y112.485 G1 X119.103 Y112.501 G1 X119.126 Y112.522 G1 X119.155 Y112.549 G1 X119.186 Y112.576 G1 X119.217 Y112.602 G1 X119.248 Y112.627 G1 X119.28 Y112.652 G1 X119.313 Y112.676 G1 X119.346 Y112.699 G1 X119.38 Y112.721 G1 X119.414 Y112.743 G1 X119.448 Y112.764 G1 X119.483 Y112.784 G1 X119.518 Y112.804 G1 X119.554 Y112.823 G1 X119.591 Y112.841 G1 X119.627 Y112.858 G1 X119.664 Y112.875 G1 X119.706 Y112.892 G1 X119.752 Y112.911 G1 X119.799 Y112.928 G1 X119.846 Y112.944 G1 X119.894 Y112.959 G1 X119.942 Y112.973 G1 X119.991 Y112.986 G1 X120.04 Y112.997 G1 X120.089 Y113.008 G1 X120.138 Y113.017 G1 X120.188 Y113.026 G1 X120.239 Y113.033 G1 X120.295 Y113.04 G1 X120.357 Y113.046 G1 X120.42 Y113.051 G1 X120.484 Y113.054 G1 X120.546 Y113.056 G1 X120.591 Y113.056 G1 X120.635 Y113.056 G1 X120.679 Y113.055 G1 X120.723 Y113.053 G1 X120.767 Y113.051 G1 X120.811 Y113.048 G1 X120.854 Y113.044 G1 X120.898 Y113.039 G1 X120.941 Y113.034 G1 X120.984 Y113.027 G1 X121.027 Y113.02 G1 X121.069 Y113.013 G1 X121.112 Y113.004 G1 X121.154 Y112.994 G1 X121.196 Y112.984 G1 X121.237 Y112.973 G1 X121.279 Y112.961 G1 X121.32 Y112.948 G1 X121.361 Y112.934 G1 X121.401 Y112.92 G1 X121.441 Y112.904 G1 X121.481 Y112.888 G1 X121.52 Y112.871 G1 X121.559 Y112.853 G1 X121.598 Y112.834 G1 X121.636 Y112.814 G1 X121.674 Y112.793 G1 X121.711 Y112.772 G1 X121.747 Y112.749 G1 X121.783 Y112.726 G1 X121.819 Y112.702 G1 X121.854 Y112.677 G1 X121.888 Y112.652 G1 X121.922 Y112.625 G1 X121.956 Y112.598 G1 X121.988 Y112.57 G1 X122.019 Y112.543 G1 X122.042 Y112.522 G1 X122.062 Y112.502 G1 X122.083 Y112.481 G1 X122.112 Y112.452 G1 X122.14 Y112.422 G1 X122.168 Y112.392 G1 X122.195 Y112.36 G1 X122.221 Y112.329 G1 X122.246 Y112.297 G1 X122.271 Y112.264 G1 X122.295 Y112.231 G1 X122.318 Y112.197 G1 X122.341 Y112.163 G1 X122.363 Y112.128 G1 X122.383 Y112.093 G1 X122.404 Y112.057 G1 X122.423 Y112.021 G1 X122.441 Y111.984 G1 X122.459 Y111.947 G1 X122.476 Y111.91 G1 X122.491 Y111.872 G1 X122.506 Y111.834 G1 X122.52 Y111.795 G1 X122.534 Y111.756 G1 X122.546 Y111.717 G1 X122.557 Y111.678 G1 X122.568 Y111.638 G1 X122.577 Y111.598 G1 X122.586 Y111.558 G1 X122.594 Y111.518 G1 X122.601 Y111.477 G1 X122.607 Y111.437 G1 X122.612 Y111.396 G1 X122.617 Y111.355 G1 X122.62 Y111.314 G1 X122.623 Y111.273 G1 X122.625 Y111.232 G1 X122.626 Y111.192 G1 X122.626 Y111.155 G1 X122.626 Y111.126 G1 X122.626 Y111.103 G1 X122.625 Y111.072 G1 X122.623 Y111.041 G1 X122.621 Y111.009 G1 X122.618 Y110.978 G1 X122.615 Y110.946 G1 X122.611 Y110.915 G1 X122.607 Y110.884 G1 X122.602 Y110.853 G1 X122.596 Y110.822 G1 X122.59 Y110.791 G1 X122.584 Y110.76 G1 X122.576 Y110.729 G1 X122.434 Y110.14 G1 X122.434 Y110.14 G1 X122.395 Y110.223 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall G1 F10200 G1 X122.588 Y110.006 E.00984 G1 X122.8 Y109.555 E.01686 G1 X122.854 Y109.34 E.00751 G1 X122.896 Y108.704 E.02155 G1 X122.766 Y108.085 E.02144 G1 X122.47 Y107.555 E.02052 G1 X122.013 Y107.113 E.02153 G1 X121.446 Y106.823 E.02157 G1 X120.937 Y106.71 E.01764 G1 X120.514 Y106.691 E.01433 G1 X119.832 Y106.798 E.02335 G1 X119.258 Y107.07 E.0215 G1 X118.773 Y107.516 E.02232 G1 X118.448 Y108.084 E.02215 G1 X118.317 Y108.652 E.01972 G1 X118.341 Y109.211 E.01893 G1 X118.545 Y109.813 E.02151 G1 X118.794 Y110.154 E.01431 G1 X118.67 Y110.336 E.00747 G1 X118.58 Y110.54 E.00755 G1 X118.476 Y111.04 E.01728 G1 X118.521 Y111.545 E.01715 G1 X118.575 Y111.745 E.00701 G1 X118.868 Y112.296 E.02113 G1 X119.341 Y112.74 E.02196 G1 X119.92 Y113.006 E.02155 G1 X120.559 Y113.095 E.02186 G1 X121.25 Y113.009 E.02355 G1 X121.816 Y112.749 E.02111 G1 X122.287 Y112.305 E.02189 G1 X122.575 Y111.75 E.02117 G1 X122.664 Y111.143 E.02074 G1 X122.593 Y110.631 E.0175 G1 X122.412 Y110.258 E.01403 ;PATH_TASK id=728 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T3000 G1 X122.413 Y110.319 F21000 G1 X122.413 Y110.319 G1 X121.751 Y110.355 G1 X121.686 Y110.221 G1 X121.77 Y110.181 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X121.876 Y110.128 E.00401 G1 X122.205 Y109.802 E.01568 G1 X122.419 Y109.353 E.01681 G1 X122.48 Y108.833 E.01773 G1 X122.4 Y108.33 E.01725 G1 X122.159 Y107.85 E.01816 G1 X121.803 Y107.486 E.01725 G1 X121.352 Y107.241 E.01735 G1 X120.844 Y107.128 E.01764 G1 X120.566 Y107.116 E.0094 G1 X119.999 Y107.193 E.01938 G1 X119.535 Y107.398 E.01717 G1 X119.134 Y107.746 E.01797 G1 X118.864 Y108.189 E.01756 G1 X118.745 Y108.694 E.01758 G1 X118.782 Y109.247 E.01876 G1 X118.943 Y109.655 E.01484 G1 X119.218 Y109.989 E.01462 G1 X119.406 Y110.138 E.00815 G1 X119.282 Y110.222 E.00506 G1 X119.024 Y110.578 E.01487 G1 X118.91 Y111.009 E.01511 G1 X118.953 Y111.537 E.01794 G1 X119.177 Y111.999 E.01736 G1 X119.538 Y112.359 E.01727 G1 X119.992 Y112.584 E.01715 G1 X120.506 Y112.669 E.01766 G1 X121.039 Y112.623 E.01812 G1 X121.488 Y112.453 E.01624 G1 X121.879 Y112.132 E.01712 G1 X122.132 Y111.725 E.01621 G1 X122.236 Y111.246 E.0166 G1 X122.195 Y110.804 E.01503 G1 X122.007 Y110.406 E.0149 G1 X121.799 Y110.208 E.00972 ;PATH_TASK id=729 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X121.703 Y110.255 Z1.2 F21000 G1 X122.413 Y110.319 G1 X122.424 Y110.339 G1 X128.351 Y111.028 G1 X128.226 Y110.903 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall G1 F10200 G1 X128.197 Y110.925 E.00123 G1 X128.109 Y111.083 E.00611 G1 X128.086 Y111.441 E.01213 G1 X128.28 Y112.129 E.0242 G1 X128.626 Y112.638 E.02084 G1 X129.122 Y113.015 E.02109 G1 X129.713 Y113.218 E.02114 G1 X130.371 Y113.25 E.02231 G1 X131.023 Y113.103 E.0226 G1 X131.553 Y112.801 E.02065 G1 X132 Y112.335 E.02187 G1 X132.323 Y111.734 E.02309 G1 X132.509 Y111.087 E.02277 G1 X132.595 Y110.46 E.02145 G1 X132.617 Y109.763 E.0236 G1 X132.587 Y109.226 E.0182 G1 X132.489 Y108.657 E.01954 G1 X132.255 Y108.039 E.0224 G1 X131.881 Y107.527 E.02144 G1 X131.339 Y107.119 E.02295 G1 X130.732 Y106.901 E.02185 G1 X130.164 Y106.856 E.01928 G1 X129.519 Y106.971 E.02217 G1 X128.942 Y107.274 E.02205 G1 X128.497 Y107.727 E.02152 G1 X128.194 Y108.294 E.02173 G1 X128.043 Y108.925 E.02197 G1 X128.052 Y109.592 E.02258 G1 X128.239 Y110.242 E.0229 G1 X128.538 Y110.711 E.01884 G1 X128.428 Y110.743 E.00385 G1 X128.257 Y110.878 E.00738 ;PATH_TASK id=730 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T3000 G1 X128.351 Y111.028 F21000 G1 X128.351 Y111.028 G1 X128.551 Y111.049 G1 X128.536 Y111.188 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X128.499 Y111.317 E.00455 ;PATH_TASK id=731 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X128.625 Y111.854 E.01866 G1 X128.866 Y112.267 E.01617 G1 X129.228 Y112.586 E.01633 G1 X129.747 Y112.791 E.01889 G1 X130.261 Y112.831 E.01746 G1 X130.777 Y112.739 E.01774 G1 X131.255 Y112.493 E.01821 G1 X131.627 Y112.123 E.01776 G1 X131.896 Y111.649 E.01845 G1 X132.079 Y111.053 E.02109 G1 X132.165 Y110.459 E.02033 G1 X132.192 Y109.869 E.01998 G1 X132.171 Y109.353 E.0175 G1 X132.091 Y108.828 E.01798 G1 X131.92 Y108.32 E.01814 G1 X131.644 Y107.897 E.01708 G1 X131.229 Y107.546 E.01839 G1 X130.731 Y107.338 E.01826 G1 X130.221 Y107.28 E.01738 G1 X129.701 Y107.359 E.01782 G1 X129.235 Y107.587 E.01754 G1 X128.868 Y107.941 E.01727 G1 X128.608 Y108.405 E.01802 G1 X128.471 Y108.932 E.01841 G1 X128.468 Y109.49 E.01888 G1 X128.607 Y110.022 E.01864 G1 X128.899 Y110.473 E.01817 ;PATH_TASK id=732 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.499362 G1 F9858.865 G1 X129.081 Y110.645 E.00951 ;PATH_TASK id=733 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.548725 G1 F8700 G1 X129.263 Y110.817 E.01053 ;PATH_TASK id=734 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.598088 G1 F8105.655 G1 X129.446 Y110.989 E.01157 G1 X129.328 Y111.018 E.00562 ;PATH_TASK id=735 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.552056 G1 F8838.512 G1 X129.21 Y111.048 E.00515 ;PATH_TASK id=736 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.506023 G1 F9717.061 G1 X128.94 Y111.083 E.0105 ;PATH_TASK id=737 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.478011 G1 F10200 G1 X128.669 Y111.117 E.00986 ;PATH_TASK id=730 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X128.572 Y111.169 E.00373 ;PATH_TASK id=738 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X128.584 Y111.053 Z1.2 F21000 G1 X130.954 Y111.25 G1 X130.942 Y110.659 G1 X130.938 Y110.664 G1 X131.074 Y110.769 G1 Z.6 F720 G1 E.7 F1500 G1 F10200 G1 X130.974 Y111.154 E.01347 G1 X130.757 Y111.563 E.01567 G1 X130.484 Y111.808 E.0124 G1 X130.231 Y111.874 E.00885 G1 X129.959 Y111.834 E.00932 G1 X129.755 Y111.699 E.00828 G1 X129.652 Y111.529 E.00674 ;PATH_TASK id=739 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.494967 G1 F9954.727 G1 X129.612 Y111.324 E.00785 ;PATH_TASK id=740 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.539934 G1 F9054.072 G1 X129.572 Y111.119 E.00863 ;PATH_TASK id=741 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.566924 G1 F8587.721 G1 X129.531 Y111.063 E.00302 ;PATH_TASK id=742 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.593914 G1 F8167.058 G1 X129.49 Y111.007 E.00318 ;PATH_TASK id=743 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X129.565 Y111.022 E.0035 ;PATH_TASK id=744 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.566924 G1 F8587.721 G1 X129.64 Y111.037 E.00333 ;PATH_TASK id=745 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.539934 G1 F9054.072 G1 X129.896 Y111.043 E.01058 ;PATH_TASK id=746 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.494967 G1 F9954.727 G1 X130.152 Y111.049 E.00962 ;PATH_TASK id=738 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X130.675 Y110.97 E.01793 G1 X131.039 Y110.787 E.01376 ;PATH_TASK id=747 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X130.918 Y110.69 Z1.2 F21000 G1 X130.165 Y111.62 G1 X130.1 Y111.618 G1 X130.1 Y111.618 G1 X130.106 Y111.449 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.397976 G1 F10200 G1 X130.301 Y111.445 E.00575 ;PATH_TASK id=748 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X130.32 Y111.612 Z1.2 F21000 G1 X129.47 Y111.13 G1 X128.351 Y111.028 G1 X128.131 Y111.48 G1 X128.137 Y111.521 G1 X128.144 Y111.561 G1 X128.151 Y111.601 G1 X128.159 Y111.642 G1 X128.168 Y111.681 G1 X128.177 Y111.721 G1 X128.187 Y111.76 G1 X128.198 Y111.799 G1 X128.209 Y111.838 G1 X128.222 Y111.877 G1 X128.234 Y111.915 G1 X128.248 Y111.953 G1 X128.262 Y111.991 G1 X128.277 Y112.028 G1 X128.293 Y112.065 G1 X128.309 Y112.102 G1 X128.327 Y112.138 G1 X128.345 Y112.174 G1 X128.363 Y112.21 G1 X128.383 Y112.245 G1 X128.403 Y112.28 G1 X128.424 Y112.314 G1 X128.445 Y112.348 G1 X128.467 Y112.382 G1 X128.49 Y112.415 G1 X128.514 Y112.447 G1 X128.539 Y112.479 G1 X128.564 Y112.51 G1 X128.59 Y112.541 G1 X128.616 Y112.571 G1 X128.643 Y112.601 G1 X128.671 Y112.63 G1 X128.699 Y112.659 G1 X128.728 Y112.687 G1 X128.756 Y112.713 G1 X128.78 Y112.734 G1 X128.805 Y112.756 G1 X128.834 Y112.78 G1 X128.864 Y112.804 G1 X128.895 Y112.827 G1 X128.925 Y112.85 G1 X128.957 Y112.872 G1 X128.989 Y112.893 G1 X129.021 Y112.914 G1 X129.053 Y112.934 G1 X129.086 Y112.953 G1 X129.12 Y112.972 G1 X129.154 Y112.99 G1 X129.192 Y113.009 G1 X129.234 Y113.029 G1 X129.277 Y113.048 G1 X129.321 Y113.067 G1 X129.365 Y113.084 G1 X129.41 Y113.1 G1 X129.455 Y113.115 G1 X129.5 Y113.129 G1 X129.546 Y113.141 G1 X129.592 Y113.153 G1 X129.638 Y113.164 G1 X129.684 Y113.174 G1 X129.731 Y113.183 G1 X129.778 Y113.19 G1 X129.826 Y113.197 G1 X129.879 Y113.204 G1 X129.937 Y113.21 G1 X129.997 Y113.214 G1 X130.056 Y113.217 G1 X130.115 Y113.219 G1 X130.159 Y113.219 G1 X130.186 Y113.219 G1 X130.236 Y113.218 G1 X130.287 Y113.216 G1 X130.338 Y113.213 G1 X130.389 Y113.21 G1 X130.439 Y113.205 G1 X130.489 Y113.199 G1 X130.539 Y113.192 G1 X130.589 Y113.184 G1 X130.638 Y113.175 G1 X130.687 Y113.164 G1 X130.736 Y113.153 G1 X130.784 Y113.141 G1 X130.833 Y113.127 G1 X130.881 Y113.113 G1 X130.928 Y113.097 G1 X130.975 Y113.08 G1 X131.022 Y113.062 G1 X131.068 Y113.044 G1 X131.113 Y113.023 G1 X131.159 Y113.002 G1 X131.203 Y112.98 G1 X131.247 Y112.957 G1 X131.291 Y112.932 G1 X131.334 Y112.907 G1 X131.376 Y112.88 G1 X131.417 Y112.853 G1 X131.458 Y112.824 G1 X131.499 Y112.795 G1 X131.538 Y112.764 G1 X131.577 Y112.733 G1 X131.615 Y112.701 G1 X131.653 Y112.668 G1 X131.689 Y112.634 G1 X131.725 Y112.599 G1 X131.76 Y112.563 G1 X131.795 Y112.526 G1 X131.829 Y112.489 G1 X131.862 Y112.45 G1 X131.89 Y112.416 G1 X131.917 Y112.381 G1 X131.948 Y112.34 G1 X131.979 Y112.298 G1 X132.009 Y112.255 G1 X132.037 Y112.212 G1 X132.065 Y112.167 G1 X132.092 Y112.122 G1 X132.121 Y112.071 G1 X132.152 Y112.014 G1 X132.181 Y111.956 G1 X132.21 Y111.897 G1 X132.237 Y111.836 G1 X132.263 Y111.775 G1 X132.288 Y111.713 G1 X132.314 Y111.642 G1 X132.341 Y111.564 G1 X132.367 Y111.483 G1 X132.391 Y111.401 G1 X132.414 Y111.317 G1 X132.437 Y111.223 G1 X132.46 Y111.117 G1 X132.481 Y111.008 G1 X132.485 Y110.985 G1 X137.78 Y109.853 G1 X137.855 Y109.855 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F10200 G1 X137.976 Y110.01 E.00669 G1 X138.408 Y110.142 E.01527 G1 X138.363 Y112.771 E.089 G1 X138.405 Y113.005 E.00805 G1 X138.597 Y113.262 E.01086 G1 X138.963 Y113.392 E.01314 G1 X139.646 Y113.392 E.0231 G1 X140.033 Y113.151 E.01546 G1 X142.434 Y109.861 E.13784 G1 X142.508 Y109.571 E.01014 G1 X142.501 Y108.796 E.02624 G1 X142.327 Y108.497 E.01173 G1 X142.146 Y108.379 E.0073 G1 X141.919 Y108.331 E.00786 G1 X140.36 Y108.305 E.05276 G1 X140.37 Y107.718 E.01985 G1 X140.327 Y107.482 E.00811 G1 X140.135 Y107.226 E.01084 G1 X139.77 Y107.097 E.0131 G1 X139.071 Y107.085 E.02369 G1 X138.759 Y107.165 E.01088 G1 X138.552 Y107.358 E.00959 G1 X138.455 Y107.613 E.00925 G1 X138.44 Y108.272 E.02231 G1 X138.375 Y108.271 E.00219 G1 X137.997 Y108.394 E.01344 G1 X137.822 Y108.601 E.00918 G1 X137.754 Y108.871 E.00943 G1 X137.743 Y109.52 E.02195 G1 X137.797 Y109.781 E.00903 G1 X137.83 Y109.823 E.00181 ;PATH_TASK id=749 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T3000 G1 X137.781 Y109.822 F21000 G1 X137.784 Y109.621 G1 X138.201 Y109.629 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X138.35 Y109.712 E.00581 G1 X138.844 Y109.72 E.0167 G1 X138.792 Y112.778 E.10351 G1 X138.861 Y112.924 E.00549 G1 X138.971 Y112.963 E.00392 G1 X139.537 Y112.973 E.01918 G1 X139.687 Y112.898 E.00568 G1 X142.075 Y109.627 E.13709 G1 X142.09 Y108.963 E.02249 G1 X142.033 Y108.809 E.00554 G1 X141.911 Y108.76 E.00444 G1 X139.925 Y108.726 E.06726 G1 X139.942 Y107.711 E.03436 G1 X139.872 Y107.564 E.0055 G1 X139.763 Y107.526 E.00391 G1 X138.97 Y107.538 E.02683 G1 X138.882 Y107.658 E.00505 G1 X138.861 Y108.708 E.03555 G1 X138.368 Y108.699 E.0167 G1 X138.255 Y108.736 E.00401 G1 X138.203 Y108.798 E.00274 G1 X138.176 Y109.282 E.01641 G1 X138.198 Y109.589 E.01042 ;PATH_TASK id=750 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X137.785 Y109.582 Z1.2 F21000 G1 X137.807 Y108.304 G1 X138.502 Y107.119 G1 X152.093 Y107.35 G1 X152.083 Y107.789 G1 X152.119 Y107.79 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.569803 G1 F8540.805 G1 X152.099 Y107.749 E.00202 ;PATH_TASK id=751 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.529868 G1 F9241.233 G1 X152.048 Y107.643 E.00476 ;PATH_TASK id=752 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.489934 G1 F10066.809 G1 X151.997 Y107.536 E.00437 ;PATH_TASK id=753 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X151.709 Y107.33 E.01201 G1 X151.523 Y107.297 E.00639 G1 X148.121 Y107.24 E.11516 G1 X147.765 Y107.354 E.01267 G1 X147.562 Y107.604 E.01089 G1 X147.51 Y107.84 E.00816 G1 X147.499 Y108.516 E.02288 G1 X147.551 Y108.773 E.0089 G1 X147.732 Y109.006 E.00996 G1 X148.037 Y109.132 E.01119 G1 X148.987 Y109.152 E.03217 G1 X148.665 Y109.424 E.01428 G1 X148.207 Y109.865 E.02151 G1 X147.794 Y110.399 E.02284 G1 X147.526 Y111.025 E.02305 G1 X147.461 Y111.649 E.02126 ;PATH_TASK id=754 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X147.525 Y112.078 E.01466 G1 X147.775 Y112.642 E.02091 G1 X148.217 Y113.126 E.02217 G1 X148.778 Y113.439 E.02173 ;PATH_TASK id=755 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.497594 G1 F9897.206 G1 X148.92 Y113.494 E.00577 ;PATH_TASK id=756 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.545189 G1 F8959.352 G1 X149.063 Y113.548 E.00637 ;PATH_TASK id=757 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.592784 G1 F8183.854 G1 X149.205 Y113.603 E.00698 ;PATH_TASK id=758 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.640378 G1 F7531.91 G1 X149.348 Y113.658 E.00758 G1 X149.625 Y113.678 E.01379 ;PATH_TASK id=759 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.648362 G1 F7432.587 G1 X150.224 Y113.646 E.03023 G1 X150.353 Y113.579 E.00733 ;PATH_TASK id=760 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.598772 G1 F8095.692 G1 X150.482 Y113.512 E.00673 ;PATH_TASK id=761 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.549181 G1 F8888.704 G1 X150.612 Y113.444 E.00613 ;PATH_TASK id=762 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.49959 G1 F9853.947 G1 X150.741 Y113.377 E.00553 ;PATH_TASK id=763 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X151.255 Y113.038 E.02085 G1 X151.639 Y112.558 E.02083 G1 X151.878 Y111.943 E.02233 G1 X151.942 Y111.574 E.01265 G1 X151.863 Y111.172 E.01388 G1 X151.607 Y110.936 E.01181 G1 X151.433 Y110.881 E.00618 G1 X150.695 Y110.792 E.02516 G1 X150.472 Y110.874 E.00802 ;PATH_TASK id=764 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.41737 G1 X150.25 Y110.956 E.00738 ;PATH_TASK id=765 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.388441 G1 X150.19 Y111.011 E.00233 ;PATH_TASK id=766 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.425456 G1 X150.102 Y111.155 E.00538 ;PATH_TASK id=767 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.46247 G1 X150.013 Y111.299 E.0059 ;PATH_TASK id=768 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.489556 G1 F10075.329 G1 X149.975 Y111.451 E.00583 ;PATH_TASK id=769 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.516641 G1 F9499.262 G1 X149.936 Y111.604 E.00618 G1 X149.833 Y111.712 E.00591 G1 X149.592 Y111.721 E.0095 G1 X149.462 Y111.642 E.00597 G1 X149.455 Y111.49 E.00598 G1 X149.556 Y111.305 E.0083 ;PATH_TASK id=770 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.489556 G1 F10075.329 G1 X149.656 Y111.119 E.00783 ;PATH_TASK id=771 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.46247 G1 F10200 G1 X149.843 Y110.907 E.00988 ;PATH_TASK id=772 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.423606 G1 X150.03 Y110.695 E.00896 ;PATH_TASK id=773 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.41737 G1 X150.289 Y110.498 E.01013 ;PATH_TASK id=774 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X150.548 Y110.301 E.01101 G1 X151.091 Y109.842 E.02406 G1 X151.533 Y109.382 E.02158 G1 X151.903 Y108.814 E.02295 ;PATH_TASK id=775 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.49399 G1 F9976.284 G1 X151.972 Y108.684 E.00552 ;PATH_TASK id=776 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.537981 G1 F9089.798 G1 X152.042 Y108.555 E.00606 ;PATH_TASK id=777 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.581972 G1 F8348.001 G1 X152.111 Y108.425 E.0066 ;PATH_TASK id=778 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.625962 G1 F7718.14 G1 X152.18 Y108.295 E.00713 G1 X152.201 Y107.961 E.01623 ;PATH_TASK id=779 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.609737 G1 F7939.071 G1 X152.15 Y107.855 E.00554 ;PATH_TASK id=750 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.569803 G1 F8540.805 G1 X152.136 Y107.826 E.00138 ;PATH_TASK id=780 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T3000 G1 X152.082 Y107.825 F21000 G1 X152.08 Y107.931 G1 X151.694 Y107.922 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X151.657 Y107.797 E.0044 G1 X151.515 Y107.726 E.00536 G1 X148.124 Y107.668 E.11481 G1 X148.015 Y107.702 E.00388 G1 X147.939 Y107.847 E.00553 G1 X147.943 Y108.6 E.02548 G1 X148.065 Y108.702 E.00539 G1 X150.113 Y108.742 E.06935 G1 X150.021 Y108.841 E.00458 G1 X148.968 Y109.728 E.04661 G1 X148.539 Y110.136 E.02001 G1 X148.181 Y110.583 E.01941 G1 X147.95 Y111.087 E.01874 G1 X147.885 Y111.586 E.01706 G1 X147.949 Y112.015 E.01466 G1 X148.192 Y112.496 E.01827 G1 X148.567 Y112.856 E.01759 G1 X149.019 Y113.071 E.01694 G1 X149.549 Y113.161 E.01819 G1 X150.114 Y113.129 E.01914 G1 X150.604 Y112.971 E.01746 G1 X151.003 Y112.692 E.01647 G1 X151.292 Y112.307 E.0163 G1 X151.472 Y111.804 E.01807 G1 X151.519 Y111.511 E.01004 G1 X151.495 Y111.391 E.00414 G1 X151.367 Y111.304 E.00525 G1 X150.644 Y111.218 E.02464 G1 X150.487 Y111.277 E.00569 G1 X150.378 Y111.766 E.01698 G1 X150.24 Y111.993 E.00896 G1 X150.015 Y112.147 E.00922 G1 X149.724 Y112.205 E.01004 G1 X149.405 Y112.162 E.01092 G1 X149.172 Y112.025 E.00913 G1 X149.019 Y111.818 E.00872 G1 X148.968 Y111.586 E.00806 G1 X149.023 Y111.29 E.01019 G1 X149.241 Y110.923 E.01446 G1 X149.653 Y110.499 E.02001 G1 X150.774 Y109.551 E.04968 G1 X151.16 Y109.163 E.01854 G1 X151.481 Y108.703 E.01899 G1 X151.662 Y108.238 E.01688 G1 X151.69 Y107.962 E.00941 ;PATH_TASK id=781 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T7000 G1 X152.079 Y107.971 F21000 G1 X152.08 Y107.892 G1 X152.767 Y107.908 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.625962 G1 F7718.14 G1 X152.758 Y108.345 E.0212 G1 X152.78 Y108.505 E.00784 ;PATH_TASK id=782 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.581972 G1 F8348.001 G1 X152.802 Y108.665 E.00725 ;PATH_TASK id=783 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.537981 G1 F9089.798 G1 X152.824 Y108.826 E.00666 ;PATH_TASK id=784 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.49399 G1 F9976.284 G1 X152.846 Y108.986 E.00606 ;PATH_TASK id=785 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X152.846 Y114.346 E.18145 G1 X150.899 Y114.346 E.06593 ;PATH_TASK id=786 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.497952 G1 F9889.425 G1 X150.716 Y114.322 E.00698 ;PATH_TASK id=787 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.545904 G1 F8946.607 G1 X150.533 Y114.299 E.00772 ;PATH_TASK id=788 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.593857 G1 F8167.91 G1 X150.35 Y114.275 E.00845 ;PATH_TASK id=789 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.641809 G1 F7513.913 G1 X150.167 Y114.251 E.00919 G1 X149.414 Y114.256 E.03751 ;PATH_TASK id=790 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.63068 G1 F7656.187 G1 X149.285 Y114.279 E.00638 ;PATH_TASK id=791 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.58551 G1 F8293.559 G1 X149.157 Y114.301 E.00589 ;PATH_TASK id=792 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.54034 G1 F9046.689 G1 X149.028 Y114.324 E.0054 ;PATH_TASK id=793 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.49517 G1 F9950.265 G1 X148.899 Y114.346 E.00491 ;PATH_TASK id=794 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X97.154 Y114.346 E1.75154 G1 X97.154 Y105.654 E.29424 G1 X98.85 Y105.654 E.05742 ;PATH_TASK id=795 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.494129 G1 F9973.216 G1 X99.034 Y105.676 E.00697 ;PATH_TASK id=796 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.538258 G1 F9084.705 G1 X99.219 Y105.698 E.00765 ;PATH_TASK id=797 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.582388 G1 F8341.559 G1 X99.403 Y105.72 E.00833 ;PATH_TASK id=798 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.626517 G1 F7710.8 G1 X99.588 Y105.742 E.00901 ;PATH_TASK id=799 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.647707 G1 F7440.636 G1 X102.087 Y105.752 E.12568 G1 X102.187 Y105.728 E.00518 ;PATH_TASK id=800 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.59828 G1 F8102.852 G1 X102.287 Y105.703 E.00476 ;PATH_TASK id=801 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.548853 G1 F8894.459 G1 X102.387 Y105.678 E.00433 ;PATH_TASK id=802 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.499426 G1 F9857.482 G1 X102.487 Y105.654 E.00391 ;PATH_TASK id=803 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F10200 G1 X152.846 Y105.654 E1.70461 G1 X152.846 Y107.248 E.05398 ;PATH_TASK id=804 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.489577 G1 F10074.845 G1 X152.827 Y107.413 E.00617 ;PATH_TASK id=805 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.529155 G1 F9254.784 G1 X152.807 Y107.578 E.00671 ;PATH_TASK id=806 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.568733 G1 F8558.176 G1 X152.787 Y107.743 E.00726 ;PATH_TASK id=807 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.608311 G1 F7959.094 G1 X152.772 Y107.868 E.00593 ;PATH_TASK id=808 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X152.889 Y107.868 Z1.2 F21000 G1 X152.889 Y114.389 G1 X153.275 Y114.775 G1 Z.6 F720 G1 E.7 F1500 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X96.725 Y114.775 E1.91415 G1 F10020 G1 X96.725 Y105.225 E.32326 G1 F10200 G1 X153.275 Y105.225 E1.91415 G1 F10080 G1 X153.275 Y114.735 E.3219 ;PATH_TASK id=809 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X152.889 Y114.389 Z1.2 F21000 G1 X151.97 Y110.988 G1 X150.711 Y110.115 G1 X150.751 Y110.081 G1 X151.035 Y110.423 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill G1 F11054.364 G1 X151.525 Y110.486 E.01674 G1 X151.834 Y110.603 E.01119 G1 X152.176 Y110.918 E.01574 ;PATH_TASK id=810 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.473017 G1 F10462.774 G1 X152.285 Y111.168 E.00974 ;PATH_TASK id=811 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.503085 G1 F9779.098 G1 X152.393 Y111.418 E.01042 G1 X152.439 Y110.803 E.0236 ;PATH_TASK id=812 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.449999 G1 F11054.364 G1 X152.439 Y109.015 E.06054 G1 X152.397 Y108.802 E.00733 G1 X151.774 Y109.726 E.03772 G1 X151.346 Y110.161 E.02065 G1 X151.065 Y110.397 E.01243 ;PATH_TASK id=813 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X152.017 Y110.108 F21000 ;WIDTH:0.544214 G1 F8976.768 G1 X151.954 Y110.108 E.00261 G1 X151.923 Y110.162 E.00261 G1 X151.954 Y110.216 E.00261 G1 X152.017 Y110.216 E.00261 G1 X152.028 Y110.197 E.00094 ;PATH_TASK id=814 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X152.37 Y111.933 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.58842 G1 F8249.313 G1 X152.392 Y111.458 E.02157 ;PATH_TASK id=815 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X152.377 Y111.971 F21000 ;WIDTH:0.56535 G1 F8613.597 G1 X152.287 Y112.156 E.00891 ;PATH_TASK id=816 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.51921 G1 F9448.035 G1 X152.198 Y112.341 E.00813 ;PATH_TASK id=817 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.450892 G1 F11030.179 G1 X152.109 Y112.525 E.00696 G1 X151.727 Y113.131 E.0243 G1 X151.485 Y113.374 E.0116 G1 X150.702 Y113.882 E.03166 G1 X150.937 Y113.939 E.0082 G1 X152.439 Y113.939 E.05097 G1 X152.439 Y112.578 E.0462 ;PATH_TASK id=818 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.47085 G1 F10515.742 G1 X152.42 Y112.389 E.00675 ;PATH_TASK id=819 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.512552 G1 F9581.981 G1 X152.4 Y112.2 E.00741 ;PATH_TASK id=820 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.533403 G1 F9174.642 G1 X152.381 Y112.011 E.00774 ;PATH_TASK id=821 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X152.026 Y113.444 F21000 ;WIDTH:0.52278 G1 F9377.735 G1 X151.966 Y113.444 E.00239 G1 X151.936 Y113.496 E.00239 G1 X151.966 Y113.548 E.00239 G1 X152.026 Y113.548 E.00239 G1 X152.036 Y113.531 E.0008 ;PATH_TASK id=822 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X149.696 Y113.551 Z1.2 F21000 G1 X149.664 Y113.551 G1 X149.63 Y113.551 G1 X149.556 Y113.549 G1 X149.487 Y113.545 G1 X149.426 Y113.54 G1 X149.365 Y113.534 G1 X149.304 Y113.527 G1 X149.244 Y113.519 G1 X149.185 Y113.509 G1 X149.125 Y113.498 G1 X149.067 Y113.485 G1 X149.015 Y113.472 G1 X148.968 Y113.46 G1 X148.921 Y113.447 G1 X148.875 Y113.432 G1 X148.829 Y113.417 G1 X148.784 Y113.401 G1 X148.739 Y113.384 G1 X148.695 Y113.365 G1 X148.651 Y113.346 G1 X148.607 Y113.326 G1 X148.564 Y113.304 G1 X148.522 Y113.282 G1 X148.48 Y113.259 G1 X148.439 Y113.234 G1 X148.398 Y113.209 G1 X148.358 Y113.183 G1 X148.319 Y113.156 G1 X148.28 Y113.127 G1 X148.242 Y113.098 G1 X148.205 Y113.068 G1 X148.169 Y113.037 G1 X148.134 Y113.006 G1 X148.107 Y112.981 G1 X148.082 Y112.957 G1 X148.052 Y112.926 G1 X148.022 Y112.895 G1 X147.992 Y112.863 G1 X147.964 Y112.831 G1 X147.936 Y112.798 G1 X147.909 Y112.764 G1 X147.882 Y112.73 G1 X147.857 Y112.695 G1 X147.832 Y112.66 G1 X147.808 Y112.624 G1 X147.785 Y112.588 G1 X147.762 Y112.551 G1 X147.741 Y112.513 G1 X147.72 Y112.476 G1 X147.72 Y112.475 G1 X147.416 Y112.633 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.38292 G1 F12000 G1 X147.7 Y112.991 E.01293 G1 X148.235 Y113.494 E.02076 ;PATH_TASK id=823 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.40117 G1 X148.499 Y113.674 E.00953 ;PATH_TASK id=824 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.437669 G1 F11399.663 G1 X148.763 Y113.854 E.0105 ;PATH_TASK id=825 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.455918 G1 F10895.936 G1 X148.8 Y113.887 E.00168 ;PATH_TASK id=826 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X148.926 Y113.448 Z1.2 F21000 G1 X148.875 Y113.432 G1 X148.829 Y113.417 G1 X148.784 Y113.401 G1 X148.739 Y113.384 G1 X148.695 Y113.365 G1 X148.651 Y113.346 G1 X148.607 Y113.326 G1 X148.564 Y113.304 G1 X148.522 Y113.282 G1 X148.48 Y113.259 G1 X148.439 Y113.234 G1 X148.398 Y113.209 G1 X148.358 Y113.183 G1 X148.319 Y113.156 G1 X148.28 Y113.127 G1 X148.242 Y113.098 G1 X148.205 Y113.068 G1 X148.169 Y113.037 G1 X148.134 Y113.006 G1 X148.107 Y112.981 G1 X148.082 Y112.957 G1 X148.052 Y112.926 G1 X148.022 Y112.895 G1 X147.992 Y112.863 G1 X147.964 Y112.831 G1 X147.936 Y112.798 G1 X147.909 Y112.764 G1 X147.882 Y112.73 G1 X147.857 Y112.695 G1 X147.832 Y112.66 G1 X147.808 Y112.624 G1 X147.785 Y112.588 G1 X147.762 Y112.551 G1 X147.741 Y112.513 G1 X147.72 Y112.476 G1 X147.7 Y112.437 G1 X147.681 Y112.398 G1 X147.663 Y112.359 G1 X147.646 Y112.32 G1 X147.63 Y112.28 G1 X147.615 Y112.239 G1 X147.6 Y112.199 G1 X147.587 Y112.158 G1 X147.575 Y112.116 G1 X147.563 Y112.075 G1 X147.553 Y112.033 G1 X147.543 Y111.991 G1 X147.534 Y111.949 G1 X147.526 Y111.906 G1 X147.52 Y111.864 G1 X147.514 Y111.821 G1 X147.509 Y111.778 G1 X147.505 Y111.735 G1 X147.501 Y111.692 G1 X147.499 Y111.648 G1 X147.498 Y111.605 G1 X147.497 Y111.563 G1 X147.497 Y111.538 G1 X147.532 Y109.084 G1 X147.396 Y109.138 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.40114 G1 F12000 G1 X147.815 Y109.478 E.01607 ;PATH_TASK id=827 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.437296 G1 F11410.445 G1 X147.854 Y109.5 E.00147 ;PATH_TASK id=828 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.455231 G1 F10914.092 G1 X147.894 Y109.521 E.00154 ;PATH_TASK id=829 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X147.4 Y107.602 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.45 G1 F11054.338 G1 X145.798 Y106 E.0767 G1 X145.222 Y106 E.01949 G1 X147.163 Y107.94 E.0929 G1 X147.153 Y108.506 E.01916 G1 X144.646 Y106 E.12 G1 X144.071 Y106 E.01949 G1 X147.839 Y109.768 E.18041 G1 X147.601 Y110.061 E.01279 G1 X147.582 Y110.087 E.00107 G1 X143.495 Y106 E.19566 G1 X142.919 Y106 E.01949 G1 X147.381 Y110.462 E.2136 G1 X147.25 Y110.739 E.01038 G2 X147.207 Y110.863 I.995 J.411 E.00445 G1 X142.343 Y106 E.23281 G1 X141.768 Y106 E.01949 G1 X147.127 Y111.359 E.25657 G2 X147.108 Y111.56 I1.376 J.233 E.00684 G1 X147.118 Y111.695 E.00458 G1 X147.158 Y111.966 E.00927 G1 X141.192 Y106 E.28561 G1 X140.616 Y106 E.01949 G1 X148.617 Y114 E.383 G1 X148.042 Y114 E.01949 G1 X142.856 Y108.815 E.24823 G3 X142.865 Y108.955 I-.828 J.122 E.00476 G1 X142.857 Y109.392 E.01479 G1 X147.466 Y114 E.2206 G1 X146.89 Y114 E.01949 G1 X142.79 Y109.901 E.19625 G1 X142.747 Y110.002 E.00373 G3 X142.672 Y110.123 I-.848 J-.442 E.00482 G1 X142.573 Y110.259 E.0057 G1 X146.314 Y114 E.17911 G1 X145.739 Y114 E.01949 G1 X142.33 Y110.592 E.16318 G1 X142.087 Y110.924 E.01395 M73 P84 R6 G1 X145.346 Y114.184 E.15602 ;PATH_TASK id=830 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X138.195 Y113.213 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.38292 G1 F12000 G1 X138.445 Y113.499 E.01073 ;PATH_TASK id=831 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.397269 G1 X138.669 Y113.641 E.00782 ;PATH_TASK id=832 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.425966 G1 F11747.951 G1 X138.893 Y113.782 E.00845 ;PATH_TASK id=833 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.465067 G1 F10659.803 G1 X138.952 Y113.812 E.00231 ;PATH_TASK id=834 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.514572 G1 F9540.932 G1 X139.011 Y113.841 E.00258 ;PATH_TASK id=835 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.564078 G1 F8634.629 G1 X139.07 Y113.87 E.00285 ;PATH_TASK id=836 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.58883 G1 F8243.117 G1 X139.689 Y113.867 E.02808 ;PATH_TASK id=837 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X139.729 Y113.866 F21000 ;WIDTH:0.57282 G1 F8492.171 G1 X139.968 Y113.89 E.01061 ;PATH_TASK id=838 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.523692 G1 F9359.955 G1 X140.208 Y113.915 E.00962 ;PATH_TASK id=839 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.450596 G1 F11038.186 G1 X140.447 Y113.939 E.00816 G1 X144.239 Y113.939 E.12852 G1 X141.766 Y111.467 E.11852 G1 X140.362 Y113.391 E.08073 ;PATH_TASK id=840 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.467728 G1 F10593.041 G1 X140.18 Y113.531 E.00811 ;PATH_TASK id=841 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.503184 G1 F9777.008 G1 X139.998 Y113.671 E.00878 ;PATH_TASK id=842 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.53864 G1 F9077.708 G1 X139.816 Y113.811 E.00946 ;PATH_TASK id=843 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.556368 G1 F8764.276 G1 X139.763 Y113.844 E.00272 ;PATH_TASK id=844 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X140.763 Y113.532 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X143.256 Y113.532 E.08438 G1 X141.815 Y112.091 E.06898 G1 X140.786 Y113.5 E.05904 ;PATH_TASK id=845 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X141.523 Y113.146 F21000 ;WIDTH:0.408259 G1 F12000 G1 X142.323 Y113.146 E.02432 G1 X141.861 Y112.683 E.01988 G1 X141.546 Y113.114 E.01619 ;PATH_TASK id=846 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X139.825 Y113.363 Z1.2 F21000 G1 X138.396 Y113.339 G1 X137.776 Y110.088 G1 X137.807 Y108.304 G1 X138.171 Y108.31 G1 X138.174 Y108.163 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.45 G1 F11054.338 G1 X136.011 Y106 E.10355 G1 X135.435 Y106 E.01949 G1 X137.672 Y108.237 E.10709 G1 X137.514 Y108.439 E.00868 G1 X137.46 Y108.6 E.00576 G1 X134.859 Y106 E.12448 G1 X134.284 Y106 E.01949 G1 X137.404 Y109.12 E.14936 G1 X137.397 Y109.517 E.01344 G2 X137.407 Y109.667 I.963 J.015 E.0051 G1 X137.416 Y109.708 E.00142 G1 X133.708 Y106 E.17751 G1 X133.132 Y106 E.01949 G1 X138.049 Y110.916 E.23534 G1 X138.039 Y111.482 E.01916 G1 X132.557 Y106 E.26244 G1 X131.981 Y106 E.01949 G1 X138.029 Y112.048 E.28954 G1 X138.02 Y112.614 E.01916 G1 X131.405 Y106 E.31663 G1 X130.829 Y106 E.01949 G1 X138.83 Y114 E.383 G1 X138.255 Y114 E.01949 G1 X132.822 Y108.568 E.26005 G1 X132.854 Y108.693 E.00437 G1 X132.935 Y109.217 E.01795 G1 X132.94 Y109.261 E.0015 G1 X137.679 Y114 E.22687 G1 X137.103 Y114 E.01949 G1 X132.966 Y109.863 E.19805 G1 X132.966 Y109.893 E.00101 G1 X132.943 Y110.416 E.01773 G1 X136.711 Y114.184 E.18034 ;PATH_TASK id=847 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X132.888 Y113.142 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.416989 G1 F12000 G1 X133.677 Y113.142 E.02454 G1 X133.192 Y112.656 E.02136 G1 X132.91 Y113.108 E.01657 ;PATH_TASK id=848 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X131.918 Y113.532 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X134.62 Y113.532 E.09146 G1 X133.079 Y111.991 E.0738 G1 X132.964 Y112.285 E.01068 G1 X132.552 Y112.943 E.02627 G1 X131.948 Y113.505 E.02796 ;PATH_TASK id=849 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X129.365 Y113.496 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.392745 G1 F12000 G1 X129.761 Y113.895 E.01636 G1 X129.756 Y113.967 E.00208 G1 X130.261 Y113.973 E.01469 ;PATH_TASK id=850 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.39632 G1 X130.61 Y113.959 E.01027 ;PATH_TASK id=851 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.44851 G1 F11094.949 G1 X130.959 Y113.946 E.01179 G1 X131.728 Y113.939 E.02592 G1 X135.603 Y113.939 E.1307 G1 X132.892 Y111.228 E.12932 G1 X132.639 Y112.024 E.02817 G1 X132.207 Y112.727 E.02781 G1 X131.635 Y113.239 E.02591 G1 X130.973 Y113.542 E.02455 ;PATH_TASK id=852 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.42644 G1 F11733.431 G1 X130.63 Y113.587 E.01101 ;PATH_TASK id=853 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.395158 G1 F12000 G1 X130.288 Y113.632 E.01011 G1 X129.684 Y113.597 E.01773 G1 X129.403 Y113.508 E.00864 ;PATH_TASK id=854 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X128.017 Y112.194 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.38292 G1 F12000 G1 X127.953 Y112.231 E.00208 G1 X128.017 Y112.268 E.00208 G1 X128.018 Y112.266 E.00007 ;PATH_TASK id=855 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X128.105 Y107.592 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.455549 G1 F10905.698 G1 X128.528 Y107.117 E.02182 G1 X128.901 Y106.813 E.0165 G1 X129.554 Y106.524 E.02453 G1 X130.315 Y106.445 E.02624 G1 X130.412 Y106.452 E.00335 G1 X130.097 Y106.136 E.01531 G1 X130.1 Y106.065 E.00245 G1 X129.562 Y106.075 E.01845 G1 X128.789 Y106.061 E.02651 G1 X126.573 Y106.061 E.07604 G1 X128.076 Y107.564 E.07295 ;PATH_TASK id=856 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X128.082 Y106.984 F21000 ;WIDTH:0.463159 G1 F10708.192 G1 X128.457 Y106.614 E.01843 G1 X128.664 Y106.474 E.00871 G1 X127.572 Y106.474 E.03816 G1 X128.053 Y106.956 E.0238 ;PATH_TASK id=857 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X126.041 Y105.816 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.45 G1 F11054.338 G1 X128.044 Y107.82 E.09591 G1 X127.95 Y107.984 E.0064 G1 X127.863 Y108.194 E.00771 G1 X127.858 Y108.21 E.00054 G1 X125.648 Y106 E.1058 G1 X125.073 Y106 E.01949 G1 X127.736 Y108.663 E.12749 G1 X127.729 Y108.687 E.00085 G2 X127.697 Y108.915 I1.05 J.265 E.00783 G1 X127.692 Y109.195 E.00947 G1 X124.497 Y106 E.15297 G1 X123.921 Y106 E.01949 G1 X127.755 Y109.833 E.18352 G1 X127.835 Y110.161 E.01141 G1 X127.863 Y110.254 E.00329 G1 X127.938 Y110.413 E.00595 G1 X128.053 Y110.606 E.00761 G1 X127.997 Y110.651 E.00244 G1 X123.345 Y106 E.22265 G1 X122.77 Y106 E.01949 G1 X127.772 Y111.002 E.23946 G2 X127.724 Y111.28 I.879 J.297 E.00961 G2 X127.728 Y111.397 I.984 J.017 E.00394 G1 X127.748 Y111.516 E.00409 G1 X127.76 Y111.566 E.00174 G1 X122.194 Y106 E.26645 G1 X121.618 Y106 E.01949 G1 X129.619 Y114 E.383 G1 X129.044 Y114 E.01949 G1 X123.127 Y108.084 E.2832 G1 X123.163 Y108.193 E.00388 G1 X123.243 Y108.678 E.01663 G1 X123.252 Y108.759 E.00278 G1 X123.253 Y108.786 E.0009 G1 X128.468 Y114 E.24962 G1 X127.892 Y114 E.01949 G1 X123.206 Y109.314 E.22434 G3 X123.182 Y109.493 I-2.072 J-.187 E.00613 G3 X123.116 Y109.695 I-1.009 J-.215 E.0072 G1 X123.083 Y109.767 E.00268 G1 X127.316 Y114 E.20263 G1 X126.741 Y114 E.01949 G1 X122.899 Y110.159 E.1839 G1 X122.877 Y110.196 E.00147 G1 X122.811 Y110.28 E.00361 G3 X122.901 Y110.466 I-2.19 J1.177 E.00701 G1 X122.923 Y110.526 E.00218 G1 X122.962 Y110.698 E.00595 G1 X122.975 Y110.811 E.00385 G1 X126.348 Y114.184 E.16147 ;PATH_TASK id=858 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X126.348 Y114.389 Z1.2 F21000 G1 X97.111 Y114.389 G1 X97.111 Y105.611 G1 X121.221 Y105.611 G1 X121.221 Y106.406 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.375143 G1 F12000 G1 X120.909 Y106.089 E.01227 G1 X120.916 Y106.018 E.00198 G1 X119.885 Y106.033 E.02847 ;PATH_TASK id=859 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.408893 G1 X119.524 Y106.047 E.011 ;PATH_TASK id=860 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.447995 G1 F11109.05 G1 X119.163 Y106.061 E.01217 G1 X115.635 Y106.061 E.11885 G1 X117.962 Y108.388 E.11086 G1 X118.064 Y107.954 E.01501 G1 X118.188 Y107.678 E.01019 G1 X118.597 Y107.104 E.02376 G1 X119.212 Y106.625 E.02625 G1 X119.864 Y106.39 E.02333 ;PATH_TASK id=861 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.381769 G1 F12000 G1 X120.469 Y106.331 E.01713 G1 X120.988 Y106.35 E.01464 G1 X121.182 Y106.396 E.00561 ;PATH_TASK id=862 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X118.746 Y106.468 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F11054.364 G1 X116.617 Y106.468 E.07206 G1 X117.766 Y107.616 E.05498 G1 X118.05 Y107.169 E.01793 G1 X118.394 Y106.736 E.01872 G1 X118.714 Y106.492 E.01363 ;PATH_TASK id=863 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X117.719 Y106.86 F21000 ;WIDTH:0.523616 G1 F9361.426 G1 X117.659 Y106.86 E.0024 G1 X117.629 Y106.912 E.0024 G1 X117.659 Y106.964 E.0024 G1 X117.719 Y106.964 E.0024 G1 X117.729 Y106.946 E.0008 ;PATH_TASK id=864 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X115.103 Y105.816 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.450007 G1 F11054.148 G1 X118.162 Y108.875 E.14644 ;PATH_TASK id=865 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X114.042 Y106.159 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.647362 G1 F7444.883 G1 X114.413 Y106.16 E.01864 ;PATH_TASK id=866 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X114.042 Y106.159 F21000 ;WIDTH:0.622692 G1 F7761.677 G1 X113.933 Y106.135 E.0054 ;PATH_TASK id=867 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.573351 G1 F8483.669 G1 X113.824 Y106.11 E.00494 ;PATH_TASK id=868 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.52401 G1 F9353.757 G1 X113.714 Y106.085 E.00448 ;PATH_TASK id=869 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.45166 G1 F11009.463 G1 X113.605 Y106.061 E.00381 G1 X112.052 Y106.061 E.05278 ;PATH_TASK id=870 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.470082 G1 F10534.663 G1 X111.737 Y106.081 E.01122 ;PATH_TASK id=871 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.510246 G1 F9629.258 G1 X111.421 Y106.101 E.01228 ;PATH_TASK id=872 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.53684 G1 F9110.787 G1 X111.366 Y106.107 E.0023 ;PATH_TASK id=873 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.520014 G1 F9432.108 G1 X111.686 Y106.23 E.01362 ;PATH_TASK id=874 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.452612 G1 F10983.878 G1 X112.007 Y106.353 E.01169 G1 X112.3 Y106.516 E.01142 G1 X112.73 Y106.866 E.01889 G1 X113.092 Y107.369 E.0211 G1 X113.132 Y106.946 E.01449 G1 X113.281 Y106.666 E.01079 G1 X113.644 Y106.364 E.01608 ;PATH_TASK id=875 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.47467 G1 F10422.713 G1 X113.735 Y106.318 E.00366 ;PATH_TASK id=876 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.52401 G1 F9353.757 G1 X113.825 Y106.271 E.00408 ;PATH_TASK id=877 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.573351 G1 F8483.669 G1 X113.916 Y106.224 E.0045 ;PATH_TASK id=878 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.598022 G1 F8106.629 G1 X114.007 Y106.178 E.00471 ;PATH_TASK id=879 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X112.931 Y106.429 F21000 ;WIDTH:0.463706 G1 F10694.271 G1 X112.879 Y106.429 E.00184 G1 X112.852 Y106.475 E.00184 G1 X112.879 Y106.52 E.00184 G1 X112.931 Y106.52 E.00184 G1 X112.938 Y106.509 E.00044 ;PATH_TASK id=880 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X110.248 Y106.127 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.563154 G1 F8649.962 G1 X110.56 Y106.108 E.01353 ;PATH_TASK id=881 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.521018 G1 F9412.297 G1 X110.872 Y106.088 E.01243 G1 X111.326 Y106.106 E.01804 ;PATH_TASK id=882 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X110.248 Y106.127 F21000 ;WIDTH:0.560372 G1 F8696.467 G1 X110.019 Y106.105 E.00992 ;PATH_TASK id=883 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.516223 G1 F9507.661 G1 X109.789 Y106.083 E.00907 ;PATH_TASK id=884 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.451576 G1 F11011.729 G1 X109.56 Y106.061 E.00783 G1 X105.694 Y106.061 E.13136 G1 X105.176 Y106.077 E.0176 G1 X105.103 Y106.08 E.00248 G1 X105.655 Y106.285 E.02 G1 X105.75 Y106.355 E.00402 G1 X106.043 Y106.783 E.01763 G1 X106.1 Y107.3 E.01767 G1 X106.065 Y109.34 E.06933 G1 X106.623 Y109.354 E.01897 G1 X106.919 Y109.515 E.01146 G1 X107.205 Y109.913 E.01664 G1 X107.277 Y110.271 E.0124 G1 X107.274 Y110.439 E.00572 G1 X107.35 Y110.441 E.00257 G1 X108.456 Y111.547 E.05316 G1 X108.292 Y110.967 E.02049 G1 X108.215 Y110.337 E.02156 G1 X108.202 Y109.724 E.02085 G1 X108.236 Y109.059 E.02261 G1 X108.346 Y108.366 E.02386 G1 X108.585 Y107.65 E.02564 G1 X108.854 Y107.177 E.01849 G1 X109.353 Y106.642 E.02487 G1 X109.637 Y106.447 E.01171 ;PATH_TASK id=885 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.468693 G1 F10569.032 G1 X109.823 Y106.349 E.00744 ;PATH_TASK id=886 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.506079 G1 F9715.897 G1 X110.009 Y106.251 E.00809 ;PATH_TASK id=887 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.543465 G1 F8990.204 G1 X110.195 Y106.153 E.00875 ;PATH_TASK id=888 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.562158 G1 F8666.546 G1 X110.212 Y106.144 E.00084 ;PATH_TASK id=889 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X108.957 Y106.468 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X106.338 Y106.468 E.08865 G1 X106.444 Y106.711 E.00897 G1 X106.51 Y107.142 E.01477 G1 X106.479 Y108.943 E.06097 G1 X106.889 Y109.01 E.01404 G1 X107.253 Y109.269 E.01513 G1 X107.575 Y109.742 E.01939 ;PATH_TASK id=890 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.472302 G1 F10480.199 G1 X107.629 Y109.87 E.00497 ;PATH_TASK id=891 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.516906 G1 F9493.962 G1 X107.683 Y109.999 E.00549 ;PATH_TASK id=892 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.56151 G1 F8677.378 G1 X107.736 Y110.127 E.006 ;PATH_TASK id=893 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X107.759 Y109.932 E.00847 ;PATH_TASK id=894 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.516906 G1 F9493.962 G1 X107.781 Y109.737 E.00774 ;PATH_TASK id=895 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.45248 G1 F10987.409 G1 X107.804 Y109.542 E.00669 G1 X107.834 Y108.998 E.01855 G1 X107.935 Y108.337 E.02277 G1 X108.173 Y107.588 E.02675 G1 X108.5 Y106.976 E.02365 G1 X108.931 Y106.497 E.02191 ;PATH_TASK id=896 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X108.089 Y106.875 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X106.887 Y106.875 E.04069 ;PATH_TASK id=897 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.46271 G1 F10719.664 G1 X106.908 Y107.437 E.01964 ;PATH_TASK id=898 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.48813 G1 F10107.595 G1 X106.928 Y107.999 E.02083 ;PATH_TASK id=899 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.514615 G1 F9540.063 G1 X106.937 Y108.28 E.01102 ;PATH_TASK id=900 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.55493 G1 F8788.903 G1 X106.946 Y108.561 E.01197 G1 X107.219 Y108.671 E.01254 G1 X107.4 Y108.794 E.0093 G1 X107.476 Y108.266 E.02267 ;PATH_TASK id=901 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.546203 G1 F8941.289 G1 X107.579 Y107.998 E.01204 ;PATH_TASK id=902 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.507722 G1 F9681.552 G1 X107.682 Y107.73 E.01112 ;PATH_TASK id=903 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.462189 G1 F10732.979 G1 X107.786 Y107.461 E.01003 G1 X108.071 Y106.91 E.02163 ;PATH_TASK id=904 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X107.392 Y107.269 F21000 ;WIDTH:0.529732 G1 F9243.815 G1 X107.331 Y107.269 E.00246 G1 X107.3 Y107.322 E.00246 G1 X107.331 Y107.374 E.00246 G1 X107.392 Y107.374 E.00246 G1 X107.402 Y107.356 E.00084 ;PATH_TASK id=905 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X104.206 Y106.082 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.493234 G1 F9993.027 G1 X105.063 Y106.081 E.03208 ;PATH_TASK id=906 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X104.206 Y106.082 F21000 ;WIDTH:0.473527 G1 F10450.38 G1 X104.037 Y106.063 E.00611 ;PATH_TASK id=907 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.434111 G1 F11503.332 G1 X103.867 Y106.043 E.00555 ;PATH_TASK id=908 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.404872 G1 F12000 G1 X103.698 Y106.023 E.00514 G1 X103.065 Y106.056 E.01907 ;PATH_TASK id=909 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.447022 G1 F11135.802 G1 X102.996 Y106.063 E.00232 ;PATH_TASK id=910 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.434105 G1 F11503.522 G1 X103.271 Y106.177 E.00969 ;PATH_TASK id=911 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.383554 G1 F12000 G1 X103.546 Y106.292 E.00843 G1 X103.694 Y106.428 E.00569 G1 X103.831 Y106.302 E.00528 ;PATH_TASK id=912 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.394696 G1 X103.945 Y106.236 E.00385 ;PATH_TASK id=913 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.434111 G1 F11503.332 G1 X104.058 Y106.169 E.00428 ;PATH_TASK id=914 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.453819 G1 F10951.605 G1 X104.172 Y106.102 E.0045 ;PATH_TASK id=915 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X102.534 Y106.059 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.445942 G1 F11165.643 G1 X102.956 Y106.062 E.01416 ;PATH_TASK id=916 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X98.362 Y106.43 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.369015 G1 F12000 G1 X97.93 Y106.43 E.01171 G1 X97.92 Y106.971 E.01467 ;PATH_TASK id=917 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.379828 G1 X97.945 Y107.037 E.00199 ;PATH_TASK id=918 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.428714 G1 F11664.278 G1 X97.969 Y107.104 E.00228 ;PATH_TASK id=919 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.477599 G1 F10352.472 G1 X97.994 Y107.171 E.00257 ;PATH_TASK id=920 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.526485 G1 F9305.899 G1 X98.018 Y107.237 E.00285 ;PATH_TASK id=921 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.57537 G1 F8451.502 G1 X98.043 Y107.304 E.00314 ;PATH_TASK id=922 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.624256 G1 F7740.8 G1 X98.067 Y107.371 E.00343 ;PATH_TASK id=923 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X98.095 Y107.305 E.00343 ;PATH_TASK id=924 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.57537 G1 F8451.502 G1 X98.122 Y107.24 E.00314 ;PATH_TASK id=925 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.526485 G1 F9305.899 G1 X98.15 Y107.175 E.00285 ;PATH_TASK id=926 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.477599 G1 F10352.472 G1 X98.177 Y107.109 E.00257 ;PATH_TASK id=927 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.428714 G1 F11664.278 G1 X98.205 Y107.044 E.00228 ;PATH_TASK id=928 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.367253 G1 F12000 G1 X98.233 Y106.978 E.00191 G1 X98.255 Y106.641 E.00911 G1 X98.344 Y106.466 E.00531 ;PATH_TASK id=929 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X98.067 Y107.371 F21000 ;WIDTH:0.648698 G1 F7428.464 G1 X98.065 Y107.782 E.02073 ;PATH_TASK id=930 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X98.651 Y108.875 F21000 ;WIDTH:0.593097 G1 F8179.193 G1 X98.279 Y108.419 E.02691 G1 X98.15 Y108.142 E.01401 ;PATH_TASK id=931 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.618443 G1 F7818.981 G1 X98.066 Y107.837 E.01511 G1 X98.038 Y108.5 E.03174 ;PATH_TASK id=932 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.59154 G1 F8202.399 G1 X98.038 Y110.241 E.07942 G1 X98.095 Y110.297 E.00365 G1 X98.194 Y109.803 E.02301 G1 X98.556 Y109.046 E.03829 G1 X98.632 Y108.91 E.00708 ;PATH_TASK id=933 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X99.436 Y108.704 F21000 ;WIDTH:0.449999 G1 F11054.365 G1 X98.947 Y108.5 E.01796 G1 X98.623 Y108.048 E.01879 G1 X98.559 Y107.69 E.01231 G1 X98.602 Y106.79 E.03052 G1 X98.884 Y106.299 E.01916 G1 X99.04 Y106.133 E.00771 G1 X98.753 Y106.061 E.01001 G1 X97.561 Y106.061 E.04038 G1 X97.561 Y110.522 E.151 G1 X97.643 Y110.522 E.0028 G1 X98.686 Y111.564 E.04992 G1 X98.592 Y111.333 E.00846 G1 X98.523 Y110.616 E.02436 G1 X98.662 Y109.896 E.02482 G1 X98.981 Y109.266 E.02391 G1 X99.358 Y108.782 E.02078 G1 X99.408 Y108.732 E.00238 ;PATH_TASK id=934 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X98.972 Y111.977 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.38292 G1 F12000 G1 X99.451 Y112.489 E.01984 G1 X99.615 Y112.631 E.00613 ;PATH_TASK id=935 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X101.224 Y113.546 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.42261 G1 F11851.774 G1 X101.593 Y113.541 E.01164 ;PATH_TASK id=936 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X103.697 Y113.511 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.492769 G1 F10003.356 G1 X103.288 Y113.236 E.01843 G1 X103.068 Y112.997 E.01214 G1 X102.5 Y113.328 E.02458 ;PATH_TASK id=937 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.479686 G1 F10303.011 G1 X102.089 Y113.432 E.01542 ;PATH_TASK id=938 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.461544 G1 F10749.504 G1 X101.677 Y113.536 E.01478 G1 X102.35 Y113.511 E.02345 ;PATH_TASK id=939 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.492769 G1 F10003.356 G1 X103.657 Y113.511 E.04887 ;PATH_TASK id=940 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X107.673 Y113.101 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.498458 G1 F9878.429 G1 X107.159 Y112.587 E.02753 G1 X106.586 Y112.924 E.02518 G1 X106.414 Y113.101 E.00934 G1 X107.633 Y113.101 E.04617 ;PATH_TASK id=941 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X109.433 Y112.725 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.38292 G1 F12000 G1 X108.967 Y112.248 E.01886 ;PATH_TASK id=942 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X108.714 Y113.532 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X107.202 Y112.02 E.07238 G1 X106.792 Y112.303 E.01687 G1 X106.338 Y112.567 E.01777 G1 X106.102 Y112.795 E.01112 G1 X105.83 Y113.15 E.01511 G1 X105.555 Y113.393 E.01244 G1 X105.355 Y113.532 E.00826 G1 X108.674 Y113.532 E.11236 ;PATH_TASK id=943 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X109.697 Y113.939 F21000 G1 F11054.364 G1 X107.16 Y111.402 E.12145 G1 X106.975 Y111.681 E.01131 G1 X106.587 Y111.951 E.01601 G1 X106.096 Y112.237 E.01923 G1 X105.77 Y112.559 E.01552 G1 X105.561 Y112.845 E.01199 G1 X105.217 Y113.128 E.01506 ;PATH_TASK id=944 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.469217 G1 F10556.024 G1 X105.139 Y113.171 E.00317 ;PATH_TASK id=945 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.507653 G1 F9682.987 G1 X105.061 Y113.215 E.00345 ;PATH_TASK id=946 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.546089 G1 F8943.329 G1 X104.983 Y113.258 E.00374 ;PATH_TASK id=947 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.600396 G1 F8072.105 G1 X104.905 Y113.302 E.00414 G1 X104.285 Y113.305 E.02876 ;PATH_TASK id=948 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.578832 G1 F8396.912 G1 X104.152 Y113.252 E.0064 ;PATH_TASK id=949 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.533256 G1 F9177.38 G1 X104.018 Y113.198 E.00585 ;PATH_TASK id=950 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.487681 G1 F10117.801 G1 X103.885 Y113.145 E.00531 ;PATH_TASK id=951 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.450616 G1 F11037.639 G1 X103.513 Y112.857 E.01595 G1 X103.318 Y112.474 E.01458 G1 X103.296 Y112.143 E.01125 G1 X103.089 Y112.422 E.01179 G1 X102.739 Y112.693 E.01498 G1 X102.284 Y112.958 E.01786 G1 X101.578 Y113.144 E.02475 G1 X100.838 Y113.155 E.0251 G1 X100.29 Y113.054 E.0189 G1 X100.09 Y112.968 E.00737 G1 X100.978 Y113.857 E.04259 G1 X100.978 Y113.939 E.00281 G1 X103.52 Y113.939 E.08615 G1 X103.79 Y113.932 E.00917 ;PATH_TASK id=952 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.487682 G1 F10117.774 G1 X103.956 Y113.909 E.0062 ;PATH_TASK id=953 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.53326 G1 F9177.315 G1 X104.123 Y113.886 E.00684 ;PATH_TASK id=954 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.597595 G1 F8112.858 G1 X104.289 Y113.864 E.00774 G1 X104.907 Y113.863 E.02852 ;PATH_TASK id=955 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.584524 G1 F8308.652 G1 X105.082 Y113.882 E.00793 ;PATH_TASK id=956 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.546089 G1 F8943.329 G1 X105.257 Y113.901 E.00737 ;PATH_TASK id=957 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.507653 G1 F9682.987 G1 X105.433 Y113.92 E.00681 ;PATH_TASK id=958 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.451602 G1 F11011.027 G1 X105.608 Y113.939 E.00599 G1 X109.657 Y113.939 E.1376 ;PATH_TASK id=959 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X113.215 Y113.54 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.435135 G1 F11473.298 G1 X112.848 Y113.189 E.01655 G1 X112.751 Y113.07 E.00501 G1 X112.391 Y113.324 E.01437 G1 X111.913 Y113.54 E.0171 G1 X113.175 Y113.54 E.04115 ;PATH_TASK id=960 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X117.825 Y113.055 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.585569 G1 F8292.654 G1 X117.514 Y112.521 E.02786 G1 X117.427 Y112.333 E.00936 G1 X117.012 Y112.703 E.02508 G1 X116.432 Y113.057 E.03067 G1 X117.785 Y113.055 E.06107 ;PATH_TASK id=961 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X119.119 Y113.532 F21000 ;WIDTH:0.448692 G1 F11089.974 G1 X118.883 Y113.411 E.00894 G1 X118.595 Y113.186 E.01233 G1 X118.219 Y112.784 E.01859 G1 X117.945 Y112.321 E.01815 G1 X117.801 Y111.991 E.01214 G1 X117.707 Y111.504 E.01672 ;PATH_TASK id=962 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.419105 G1 F11962.195 G1 X117.703 Y110.92 E.01828 G1 X117.793 Y110.33 E.01866 ;PATH_TASK id=963 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.458972 G1 F10815.957 G1 X117.823 Y110.209 E.00433 G1 X117.66 Y109.785 E.01574 ;PATH_TASK id=964 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.427523 G1 F11700.377 G1 X117.469 Y109.578 E.00898 ;PATH_TASK id=965 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.379725 G1 F12000 G1 X117.279 Y109.372 E.00787 G1 X116.876 Y108.985 E.01563 ;PATH_TASK id=966 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.408451 G1 X116.544 Y108.682 E.01368 ;PATH_TASK id=967 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.4642 G1 F10681.747 G1 X116.211 Y108.379 E.01577 G1 X116.199 Y109.093 E.02502 G1 X116.39 Y109.1 E.00671 ;PATH_TASK id=968 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.453171 G1 F10968.912 G1 X116.558 Y109.211 E.00686 ;PATH_TASK id=969 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.417239 G1 F12000 G1 X116.725 Y109.323 E.00626 ;PATH_TASK id=970 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.378412 G1 X116.892 Y109.434 E.00561 G1 X117.19 Y109.789 E.01291 ;PATH_TASK id=971 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.405277 G1 X117.246 Y109.883 E.0033 ;PATH_TASK id=972 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.446734 G1 F11143.753 G1 X117.303 Y109.977 E.00368 G1 X117.388 Y110.312 E.01161 ;PATH_TASK id=973 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.438343 G1 F11380.225 G1 X117.372 Y110.598 E.0094 ;PATH_TASK id=974 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.412721 G1 F12000 G2 X117.327 Y111.489 I60.132 J3.49 E.02745 ;PATH_TASK id=975 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.44961 G1 F11064.939 G1 X117.271 Y111.674 E.00652 G1 X117.087 Y112.006 E.01285 G1 X116.71 Y112.337 E.01696 G1 X116.087 Y112.709 E.02454 G1 X115.817 Y112.952 E.01229 G1 X115.539 Y113.315 E.01545 G1 X115.293 Y113.532 E.01111 G1 X119.079 Y113.532 E.12804 ;PATH_TASK id=976 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X123.257 Y113.058 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.487778 G1 F10115.587 G1 X123.202 Y113.058 E.00206 G1 X123.174 Y113.106 E.00206 M73 P84 R5 G1 X123.202 Y113.154 E.00206 G1 X123.257 Y113.154 E.00206 G1 X123.265 Y113.141 E.00058 ;PATH_TASK id=977 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X123.158 Y112.432 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X122.904 Y112.832 E.01603 G1 X122.685 Y113.079 E.01117 G1 X122.263 Y113.427 E.0185 G1 X122.088 Y113.532 E.00692 G1 X124.258 Y113.532 E.07345 G1 X123.186 Y112.46 E.05131 ;PATH_TASK id=978 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X122.998 Y111.697 F21000 ;WIDTH:0.459468 G1 F10803.085 G1 X122.851 Y112.151 E.01654 G1 X122.592 Y112.569 E.01702 G1 X122.421 Y112.769 E.00911 G1 X122.053 Y113.078 E.01664 G1 X121.787 Y113.233 E.01066 G1 X121.133 Y113.474 E.02415 G1 X120.523 Y113.511 E.02115 ;PATH_TASK id=979 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.485285 G1 F10172.595 G1 X119.85 Y113.439 E.02491 G1 X119.165 Y113.107 E.02803 ;PATH_TASK id=980 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.450157 G1 F11050.093 G1 X118.888 Y112.904 E.01162 G1 X118.554 Y112.553 E.01641 G1 X118.314 Y112.149 E.0159 G1 X118.121 Y111.618 E.01914 G1 X118.069 Y111.035 E.01982 G1 X118.198 Y110.395 E.0221 G1 X118.295 Y110.188 E.00775 G1 X118.062 Y109.694 E.0185 G1 X117.953 Y109.474 E.00829 G1 X117.84 Y109.417 E.0043 G1 X115.81 Y107.387 E.0972 G1 X115.774 Y109.504 E.0717 G1 X116.339 Y109.514 E.01913 G1 X116.704 Y109.75 E.01472 G1 X116.91 Y110.081 E.01321 G1 X116.983 Y110.382 E.01048 G1 X116.971 Y111.186 E.02722 G1 X116.911 Y111.485 E.01031 G1 X116.732 Y111.791 E.01203 G1 X116.423 Y112.042 E.01347 G1 X115.805 Y112.402 E.02423 G1 X115.485 Y112.716 E.01517 G1 X115.269 Y113.01 E.01235 G1 X114.928 Y113.298 E.01513 ;PATH_TASK id=981 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.475591 G1 F10400.524 G1 X114.771 Y113.362 E.0061 ;PATH_TASK id=982 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.517043 G1 F9491.225 G1 X114.614 Y113.426 E.00668 G1 X113.994 Y113.429 E.02444 ;PATH_TASK id=983 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.50227 G1 F9796.457 G1 X113.781 Y113.36 E.00854 ;PATH_TASK id=984 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.451908 G1 F11002.783 G1 X113.568 Y113.291 E.00761 G1 X113.186 Y112.976 E.01684 G1 X113.09 Y112.81 E.00653 G1 X112.995 Y112.389 E.01468 G1 X112.997 Y112.162 E.00772 G1 X112.778 Y112.463 E.01267 G1 X112.405 Y112.832 E.01784 ;PATH_TASK id=985 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.473424 G1 F10452.876 G1 X112.024 Y113.053 E.01577 ;PATH_TASK id=986 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.520273 G1 F9426.996 G1 X111.643 Y113.275 E.01749 ;PATH_TASK id=987 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.55632 G1 F8765.108 G1 X111.612 Y113.297 E.00163 ;PATH_TASK id=988 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.560471 G1 F8694.797 G1 X111.581 Y113.319 E.00165 G1 X110.972 Y113.387 E.02634 G1 X110.312 Y113.329 E.02853 G1 X110.65 Y113.71 E.02194 G1 X110.609 Y113.891 E.00797 G1 X111.621 Y113.867 E.04358 ;PATH_TASK id=989 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.570155 G1 F8535.097 G1 X111.893 Y113.891 E.01198 ;PATH_TASK id=990 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.522093 G1 F9391.19 G1 X112.165 Y113.915 E.01088 ;PATH_TASK id=991 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.455782 G1 F10899.544 G1 X112.438 Y113.939 E.00938 G1 X113.485 Y113.938 E.03595 ;PATH_TASK id=992 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.468786 G1 F10566.722 G1 X113.739 Y113.922 E.00903 ;PATH_TASK id=993 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.514895 G1 F9534.413 G1 X113.994 Y113.905 E.01001 G1 X114.615 Y113.904 E.0244 ;PATH_TASK id=994 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.503351 G1 F9773.451 G1 X114.935 Y113.922 E.01224 ;PATH_TASK id=995 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.456325 G1 F10885.225 G1 X115.254 Y113.939 E.01099 G1 X118.987 Y113.939 E.12831 G1 X119.685 Y113.918 E.02402 G1 X120.443 Y113.931 E.02605 G1 X121.13 Y113.92 E.02365 G1 X121.904 Y113.939 E.02659 G1 X125.241 Y113.939 E.1147 G1 X123.027 Y111.726 E.10762 ;PATH_TASK id=996 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X122.573 Y111.616 Z1.2 F21000 G1 X129.042 Y107.249 G1 X129.08 Y107.224 G1 X129.117 Y107.2 G1 X129.156 Y107.177 G1 X129.2 Y107.153 G1 X129.244 Y107.129 G1 X129.29 Y107.106 G1 X129.335 Y107.084 G1 X129.381 Y107.064 G1 X129.428 Y107.044 G1 X129.475 Y107.026 G1 X129.523 Y107.009 G1 X129.571 Y106.993 G1 X129.62 Y106.979 G1 X129.668 Y106.965 G1 X129.718 Y106.953 G1 X129.767 Y106.942 G1 X129.817 Y106.932 G1 X129.867 Y106.923 G1 X129.917 Y106.915 G1 X129.968 Y106.909 G1 X130.018 Y106.903 G1 X130.069 Y106.899 G1 X130.12 Y106.896 G1 X130.171 Y106.894 G1 X130.221 Y106.893 G1 X130.252 Y106.893 G1 X130.283 Y106.893 G1 X130.334 Y106.895 G1 X130.386 Y106.897 G1 X130.437 Y106.901 G1 X130.489 Y106.905 G1 X130.54 Y106.911 G1 X130.591 Y106.917 G1 X130.641 Y106.925 G1 X130.692 Y106.934 G1 X130.742 Y106.943 G1 X130.792 Y106.954 G1 X130.841 Y106.966 G1 X130.891 Y106.98 G1 X130.939 Y106.994 G1 X130.988 Y107.009 G1 X131.036 Y107.026 G1 X131.084 Y107.043 G1 X131.131 Y107.062 G1 X131.178 Y107.082 G1 X131.224 Y107.103 G1 X131.269 Y107.125 G1 X131.315 Y107.148 G1 X131.359 Y107.173 G1 X131.403 Y107.198 G1 X131.446 Y107.224 G1 X131.489 Y107.252 G1 X131.531 Y107.28 G1 X131.573 Y107.31 G1 X131.613 Y107.34 G1 X131.653 Y107.372 G1 X131.693 Y107.404 G1 X131.731 Y107.437 G1 X131.769 Y107.471 G1 X131.806 Y107.507 G1 X131.843 Y107.543 G1 X131.878 Y107.579 G1 X131.913 Y107.617 G1 X131.946 Y107.654 G1 X131.965 Y107.676 G1 X131.985 Y107.7 G1 X132.013 Y107.735 G1 X132.042 Y107.772 G1 X132.069 Y107.81 G1 X132.096 Y107.848 G1 X132.109 Y107.867 G1 X136.36 Y105.611 G1 X136.36 Y106.061 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F11054.364 G1 X138.045 Y107.746 E.08069 G1 X138.063 Y107.514 E.0079 G1 X138.244 Y107.096 E.0154 G1 X138.607 Y106.791 E.01606 ;PATH_TASK id=997 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.467554 G1 F10597.382 G1 X138.759 Y106.736 E.00573 ;PATH_TASK id=998 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.502662 G1 F9788.108 G1 X138.912 Y106.681 E.0062 ;PATH_TASK id=999 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.554185 G1 F8801.706 G1 X139.064 Y106.626 E.00689 G1 X139.778 Y106.635 E.03034 ;PATH_TASK id=1000 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.539218 G1 F9067.142 G1 X139.913 Y106.702 E.00621 ;PATH_TASK id=1001 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.496643 G1 F9917.956 G1 X140.048 Y106.769 E.00568 ;PATH_TASK id=1002 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.454068 G1 F10944.977 G1 X140.183 Y106.835 E.00515 ;PATH_TASK id=1003 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.411493 G1 F12000 G1 X140.318 Y106.902 E.00462 ;PATH_TASK id=1004 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.382152 G1 X140.649 Y107.308 E.01477 ;PATH_TASK id=1005 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.396308 G1 X140.7 Y107.434 E.00399 ;PATH_TASK id=1006 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.440727 G1 F11312.017 G1 X140.752 Y107.559 E.00449 ;PATH_TASK id=1007 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.505584 G1 F9726.29 G1 X140.803 Y107.685 E.00522 G1 X140.803 Y107.876 E.00737 G1 X141.603 Y107.89 E.03075 G1 X141.197 Y107.484 E.0221 ;PATH_TASK id=1008 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.485147 G1 F10175.784 G1 X141.097 Y107.353 E.00604 ;PATH_TASK id=1009 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.440727 G1 F11312.017 G1 X140.998 Y107.222 E.00543 ;PATH_TASK id=1010 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.396308 G1 F12000 G1 X140.899 Y107.092 E.00483 ;PATH_TASK id=1011 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.3593 G1 X140.54 Y106.712 E.01373 ;PATH_TASK id=1012 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.366103 G1 X140.44 Y106.643 E.00327 ;PATH_TASK id=1013 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.409303 G1 X140.34 Y106.573 E.00371 ;PATH_TASK id=1014 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.452504 G1 F10986.77 G1 X140.24 Y106.504 E.00415 ;PATH_TASK id=1015 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.495704 G1 F9938.511 G1 X140.14 Y106.434 E.00459 ;PATH_TASK id=1016 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.556716 G1 F8758.353 G1 X140.04 Y106.365 E.00521 G1 X139.858 Y106.183 E.01099 G1 X139.858 Y106.116 E.00285 G1 X139.06 Y106.113 E.03407 ;PATH_TASK id=1017 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.537741 G1 F9094.204 G1 X138.878 Y106.096 E.00755 ;PATH_TASK id=1018 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.502644 G1 F9788.482 G1 X138.695 Y106.078 E.00701 ;PATH_TASK id=1019 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.452804 G1 F10978.731 G1 X138.512 Y106.061 E.00625 G1 X136.4 Y106.061 E.072 ;PATH_TASK id=1020 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X137.335 Y106.465 F21000 ;WIDTH:0.443967 G1 F11220.629 G1 X137.848 Y106.978 E.0242 G1 X137.968 Y106.8 E.00715 G1 X138.245 Y106.543 E.01259 G1 X138.387 Y106.465 E.0054 G1 X137.375 Y106.465 E.03373 ;PATH_TASK id=1021 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X146.147 Y106.061 Z1.2 F21000 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F11054.364 G1 X147.343 Y107.257 E.05725 G1 X147.567 Y107.001 E.0115 G1 X148.001 Y106.83 E.01579 G1 X151.529 Y106.89 E.11946 G1 X151.893 Y106.972 E.0126 G1 X152.304 Y107.27 E.0172 G1 X152.396 Y107.404 E.0055 G1 X152.439 Y107.164 E.00825 G1 X152.439 Y106.061 E.03735 G1 X146.187 Y106.061 E.21165 ;PATH_TASK id=1022 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X147.345 Y106.557 F21000 ;WIDTH:0.606543 G1 F7984.072 G1 X147.464 Y106.535 E.00569 ;PATH_TASK id=1023 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.562371 G1 F8662.999 G1 X147.584 Y106.512 E.00524 ;PATH_TASK id=1024 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.518199 G1 F9468.123 G1 X147.703 Y106.49 E.0048 ;PATH_TASK id=1025 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.474028 G1 F10438.233 G1 X147.822 Y106.467 E.00435 ;PATH_TASK id=1026 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.436462 G1 F11434.614 G1 X147.942 Y106.445 E.00397 G1 X151.536 Y106.475 E.11764 ;PATH_TASK id=1027 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.485102 G1 F10176.816 G1 X151.741 Y106.493 E.00755 ;PATH_TASK id=1028 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.504603 G1 F9746.947 G1 X151.946 Y106.511 E.00788 ;PATH_TASK id=1029 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X120.547 Y106.729 Z1.2 F21000 G1 X120.497 Y106.73 G1 X120.448 Y106.732 G1 X120.4 Y106.735 G1 X120.351 Y106.739 G1 X120.303 Y106.743 G1 X120.254 Y106.749 G1 X120.206 Y106.755 G1 X120.159 Y106.762 G1 X120.111 Y106.77 G1 X120.064 Y106.779 G1 X120.017 Y106.789 G1 X119.97 Y106.8 G1 X119.924 Y106.812 G1 X119.878 Y106.825 G1 X119.832 Y106.838 G1 X119.787 Y106.853 G1 X119.742 Y106.868 G1 X119.698 Y106.885 G1 X119.653 Y106.903 G1 X119.61 Y106.921 G1 X119.566 Y106.94 G1 X119.524 Y106.961 G1 X119.481 Y106.982 G1 X119.439 Y107.004 G1 X119.398 Y107.028 G1 X119.357 Y107.052 G1 X119.317 Y107.077 G1 X119.277 Y107.103 G1 X119.238 Y107.13 G1 X119.2 Y107.157 G1 X119.162 Y107.186 G1 X119.125 Y107.216 G1 X119.089 Y107.246 G1 X119.053 Y107.277 G1 X119.018 Y107.309 G1 X116.55 Y109.623 G1 X116.518 Y111.504 G1 X114.804 Y112.958 G1 X110.837 Y112.891 G1 X110.777 Y112.889 G1 X110.721 Y112.886 G1 X110.67 Y112.882 G1 X110.621 Y112.877 G1 X110.571 Y112.872 G1 X110.522 Y112.865 G1 X110.472 Y112.857 G1 X110.424 Y112.848 G1 X110.375 Y112.837 G1 X110.327 Y112.826 G1 X110.279 Y112.813 G1 X110.231 Y112.8 G1 X110.184 Y112.785 G1 X110.142 Y112.771 G1 X110.104 Y112.757 G1 X110.067 Y112.742 G1 X110.03 Y112.727 G1 X109.993 Y112.711 G1 X109.957 Y112.694 G1 X109.921 Y112.676 G1 X109.887 Y112.659 G1 X109.866 Y112.647 G1 X109.848 Y112.637 G1 X109.81 Y112.616 G1 X109.773 Y112.594 G1 X109.74 Y112.573 G1 X109.708 Y112.552 G1 X109.676 Y112.53 G1 X109.645 Y112.508 G1 X109.614 Y112.485 G1 X109.583 Y112.461 G1 X109.553 Y112.436 G1 X109.524 Y112.411 G1 X109.495 Y112.386 G1 X109.466 Y112.359 G1 X109.438 Y112.333 G1 X109.411 Y112.305 G1 X109.384 Y112.277 G1 X109.358 Y112.249 G1 X109.332 Y112.22 G1 X109.307 Y112.191 G1 X109.282 Y112.161 G1 X109.258 Y112.13 G1 X109.235 Y112.099 G1 X109.212 Y112.068 G1 X109.19 Y112.036 G1 X109.168 Y112.004 G1 X109.151 Y111.977 G1 X109.134 Y111.951 G1 X109.106 Y111.905 G1 X109.077 Y111.856 G1 X109.05 Y111.806 G1 X109.023 Y111.755 G1 X108.998 Y111.703 G1 X108.973 Y111.651 G1 X108.949 Y111.598 G1 X108.927 Y111.544 G1 X108.905 Y111.49 G1 X108.884 Y111.435 G1 X108.864 Y111.379 G1 X108.845 Y111.322 G1 X108.827 Y111.265 G1 X108.81 Y111.207 G1 X108.793 Y111.148 G1 X108.778 Y111.09 G1 X108.769 Y111.055 G1 X108.76 Y111.019 G1 X108.745 Y110.954 G1 X108.731 Y110.884 G1 X108.718 Y110.812 G1 X108.707 Y110.739 G1 X108.696 Y110.665 G1 X108.687 Y110.589 G1 X108.679 Y110.511 G1 X108.672 Y110.431 G1 X108.666 Y110.35 G1 X108.664 Y110.316 G1 X106.825 Y110.451 G1 X107.076 Y110.456 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.450008 G1 F11054.12 G1 X110.541 Y113.92 E.16586 ;PATH_TASK id=1030 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X110.541 Y114.389 Z1.2 F21000 G1 X103.722 Y112.77 G1 X103.768 Y110.067 G1 X103.772 Y109.8 G1 X103.299 Y109.792 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.49566 G1 F9939.479 G1 X103.316 Y108.837 E.03596 G1 X102.918 Y109.262 E.02191 G1 X102.553 Y109.582 E.01829 G1 X103.099 Y109.67 E.02082 G1 X103.265 Y109.771 E.00733 ;PATH_TASK id=1031 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X103.221 Y110.137 Z1.2 F21000 G1 X103.437 Y110.162 G1 X103.356 Y110.836 G1 X103.345 Y110.909 G1 X103.334 Y110.975 G1 X103.323 Y111.033 G1 X103.31 Y111.091 G1 X103.297 Y111.148 G1 X103.282 Y111.204 G1 X103.266 Y111.261 G1 X103.248 Y111.316 G1 X103.23 Y111.371 G1 X103.212 Y111.42 G1 X103.194 Y111.463 G1 X103.176 Y111.506 G1 X103.157 Y111.549 G1 X103.137 Y111.591 G1 X103.117 Y111.633 G1 X103.095 Y111.674 G1 X103.072 Y111.715 G1 X103.049 Y111.755 G1 X103.024 Y111.794 G1 X102.999 Y111.833 G1 X102.973 Y111.872 G1 X102.946 Y111.909 G1 X102.917 Y111.946 G1 X102.888 Y111.983 G1 X102.859 Y112.018 G1 X102.828 Y112.053 G1 X102.796 Y112.087 G1 X102.764 Y112.12 G1 X102.731 Y112.152 G1 X102.697 Y112.183 G1 X102.671 Y112.207 G1 X102.645 Y112.229 G1 X102.612 Y112.256 G1 X102.577 Y112.284 G1 X102.541 Y112.311 G1 X102.504 Y112.338 G1 X102.467 Y112.363 G1 X102.43 Y112.388 G1 X102.391 Y112.411 G1 X102.352 Y112.434 G1 X102.313 Y112.456 G1 X102.273 Y112.477 G1 X102.233 Y112.497 G1 X102.192 Y112.517 G1 X102.151 Y112.535 G1 X102.109 Y112.553 G1 X102.067 Y112.569 G1 X102.025 Y112.585 G1 X101.982 Y112.6 G1 X101.938 Y112.614 G1 X101.895 Y112.627 G1 X101.851 Y112.639 G1 X101.807 Y112.65 G1 X101.763 Y112.661 G1 X101.718 Y112.671 G1 X101.673 Y112.679 G1 X101.628 Y112.688 G1 X101.582 Y112.695 G1 X101.537 Y112.701 G1 X101.491 Y112.707 G1 X101.445 Y112.712 G1 X101.398 Y112.716 G1 X101.351 Y112.719 G1 X101.304 Y112.722 G1 X101.257 Y112.724 G1 X101.21 Y112.725 G1 X101.163 Y112.725 G1 X101.131 Y112.725 G1 X101.097 Y112.725 G1 X101.023 Y112.723 G1 X100.954 Y112.719 G1 X100.892 Y112.714 G1 X100.832 Y112.709 G1 X100.771 Y112.701 G1 X100.711 Y112.693 G1 X100.651 Y112.683 G1 X100.592 Y112.672 G1 X100.534 Y112.659 G1 X100.482 Y112.646 G1 X100.434 Y112.634 G1 X100.388 Y112.621 G1 X100.342 Y112.606 G1 X100.296 Y112.591 G1 X100.251 Y112.575 G1 X100.206 Y112.558 G1 X100.162 Y112.539 G1 X100.118 Y112.52 G1 X100.074 Y112.5 G1 X100.031 Y112.478 G1 X99.989 Y112.456 G1 X99.947 Y112.433 G1 X99.906 Y112.409 G1 X99.865 Y112.383 G1 X99.825 Y112.357 G1 X99.786 Y112.33 G1 X99.747 Y112.301 G1 X99.709 Y112.272 G1 X99.672 Y112.242 G1 X99.635 Y112.211 G1 X99.601 Y112.18 G1 X99.574 Y112.155 G1 X99.549 Y112.131 G1 X99.519 Y112.1 G1 X99.489 Y112.069 G1 X99.459 Y112.037 G1 X99.431 Y112.005 G1 X99.403 Y111.972 G1 X99.376 Y111.938 G1 X99.349 Y111.904 G1 X99.324 Y111.869 G1 X99.299 Y111.834 G1 X99.275 Y111.798 G1 X99.252 Y111.762 G1 X99.229 Y111.725 G1 X99.208 Y111.688 G1 X99.187 Y111.65 G1 X99.167 Y111.611 G1 X99.148 Y111.573 G1 X99.13 Y111.533 G1 X99.113 Y111.494 G1 X99.097 Y111.454 G1 X99.082 Y111.414 G1 X99.067 Y111.373 G1 X99.054 Y111.332 G1 X99.041 Y111.291 G1 X99.03 Y111.249 G1 X99.019 Y111.207 G1 X99.01 Y111.165 G1 X99.001 Y111.123 G1 X98.993 Y111.08 G1 X98.986 Y111.038 G1 X98.981 Y110.995 G1 X98.976 Y110.952 G1 X98.971 Y110.909 G1 X98.968 Y110.866 G1 X98.966 Y110.822 G1 X98.965 Y110.779 G1 X98.964 Y110.737 G1 X98.964 Y110.712 G1 X98.964 Y110.688 G1 X98.966 Y110.642 G1 X98.968 Y110.594 G1 X98.972 Y110.546 G1 X98.976 Y110.498 G1 X98.982 Y110.451 G1 X98.989 Y110.403 G1 X98.997 Y110.356 G1 X99.003 Y110.324 G1 X97.111 Y110.536 G1 X97.37 Y110.536 G1 Z.6 F720 G1 E.7 F1500 ;WIDTH:0.450001 G1 F11054.31 G1 X100.834 Y114 E.16584 G1 X100.259 Y114 E.01949 G1 X97.5 Y111.241 E.13208 G1 X97.5 Y111.817 E.01949 G1 X99.683 Y114 E.10452 G1 X99.107 Y114 E.01949 G1 X97.5 Y112.393 E.07696 G1 X97.5 Y112.968 E.01949 G1 X98.715 Y114.184 E.05817 ;PATH_TASK id=1032 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X97.601 Y113.879 F21000 ;WIDTH:0.477226 G1 F10361.358 G1 X97.547 Y113.879 E.00196 G1 X97.52 Y113.926 E.00196 G1 X97.547 Y113.973 E.00196 G1 X97.601 Y113.973 E.00196 G1 X97.609 Y113.96 E.00052 ;PATH_TASK id=1033 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X97.609 Y114.389 Z1.2 F21000 G1 X120.767 Y113.051 G1 X120.811 Y113.048 G1 X120.854 Y113.044 G1 X120.898 Y113.039 G1 X120.941 Y113.034 G1 X120.984 Y113.027 G1 X121.027 Y113.02 G1 X121.069 Y113.013 G1 X121.112 Y113.004 G1 X121.154 Y112.994 G1 X121.196 Y112.984 G1 X121.237 Y112.973 G1 X129.081 Y110.695 G1 X129.053 Y110.683 G1 X129.018 Y110.666 G1 X128.982 Y110.649 G1 X128.946 Y110.631 G1 X128.91 Y110.612 G1 X128.823 Y110.565 G1 X128.785 Y110.543 G1 X128.749 Y110.52 G1 X128.712 Y110.496 G1 X128.675 Y110.471 G1 X128.639 Y110.446 G1 X128.603 Y110.419 G1 X128.567 Y110.392 G1 X128.532 Y110.363 G1 X128.497 Y110.333 G1 X128.462 Y110.303 G1 X128.428 Y110.271 G1 X128.394 Y110.239 G1 X128.361 Y110.205 G1 X128.328 Y110.171 G1 X128.295 Y110.135 G1 X128.263 Y110.099 G1 X128.232 Y110.061 G1 X128.201 Y110.022 G1 X128.194 Y110.012 G1 X128.178 Y109.98 G1 X128.174 Y109.969 G1 X128.161 Y109.923 G1 X128.148 Y109.878 G1 X128.136 Y109.832 G1 X128.126 Y109.786 G1 X128.116 Y109.74 G1 X128.107 Y109.693 G1 X128.099 Y109.646 G1 X128.092 Y109.599 G1 X128.085 Y109.552 G1 X128.08 Y109.504 G1 X128.076 Y109.456 G1 X128.072 Y109.408 G1 X128.069 Y109.36 G1 X128.067 Y109.312 G1 X128.066 Y109.263 G1 X128.066 Y109.219 G1 X128.067 Y109.174 G1 X128.068 Y109.111 G1 X128.072 Y109.047 G1 X128.077 Y108.984 G1 X128.083 Y108.92 G1 X128.091 Y108.857 G1 X128.1 Y108.794 G1 X128.111 Y108.732 G1 X128.122 Y108.676 G1 X128.134 Y108.625 G1 X128.146 Y108.576 G1 X128.159 Y108.526 G1 X128.173 Y108.477 G1 X128.188 Y108.428 G1 X128.205 Y108.379 G1 X128.222 Y108.331 G1 X128.24 Y108.283 G1 X128.259 Y108.235 G1 X128.279 Y108.188 G1 X128.3 Y108.141 G1 X128.322 Y108.096 G1 X128.339 Y108.062 G1 X128.356 Y108.028 G1 X128.382 Y107.98 G1 X128.41 Y107.931 G1 X128.439 Y107.882 G1 X128.469 Y107.835 G1 X128.498 Y107.793 G1 X128.524 Y107.755 G1 X128.551 Y107.718 G1 X128.579 Y107.682 G1 X128.607 Y107.646 G1 X128.636 Y107.611 G1 X128.666 Y107.577 G1 X128.697 Y107.544 G1 X128.728 Y107.511 G1 X128.76 Y107.479 G1 X128.793 Y107.447 G1 X128.827 Y107.416 G1 X128.861 Y107.387 G1 X128.896 Y107.357 G1 X128.932 Y107.329 G1 X128.968 Y107.302 G1 X129.004 Y107.275 G1 X129.042 Y107.249 G1 X129.08 Y107.224 G1 X129.117 Y107.2 G1 X129.156 Y107.177 G1 X129.2 Y107.153 G1 X129.244 Y107.129 G1 X129.29 Y107.106 G1 X129.335 Y107.084 G1 X129.381 Y107.064 G1 X129.428 Y107.044 G1 X129.475 Y107.026 G1 X129.523 Y107.009 G1 X129.571 Y106.993 G1 X129.62 Y106.979 G1 X129.668 Y106.965 G1 X129.718 Y106.953 G1 X129.767 Y106.942 G1 X129.817 Y106.932 G1 X129.867 Y106.923 G1 X129.917 Y106.915 G1 X129.968 Y106.909 G1 X130.018 Y106.903 G1 X130.069 Y106.899 G1 X130.12 Y106.896 G1 X130.171 Y106.894 G1 X130.221 Y106.893 G1 X130.252 Y106.893 G1 X130.283 Y106.893 G1 X130.334 Y106.895 G1 X130.386 Y106.897 G1 X130.437 Y106.901 G1 X130.489 Y106.905 G1 X130.54 Y106.911 G1 X130.591 Y106.917 G1 X130.641 Y106.925 G1 X130.692 Y106.934 G1 X130.742 Y106.943 G1 X130.792 Y106.954 G1 X130.841 Y106.966 G1 X130.891 Y106.98 G1 X130.939 Y106.994 G1 X130.988 Y107.009 G1 X131.036 Y107.026 G1 X131.084 Y107.043 G1 X131.131 Y107.062 G1 X131.178 Y107.082 G1 X137.776 Y110.082 G1 X140.073 Y109.86 G1 X140.636 Y109.698 G1 X140.661 Y109.812 G1 X140.733 Y109.796 G1 Z.6 F720 G1 E.7 F1500 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.537622 G1 F9096.384 G1 X139.931 Y110.91 E.05645 G1 X139.95 Y109.783 E.04637 G1 X140.693 Y109.796 E.03055 ;PATH_TASK id=1034 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X140.659 Y109.803 Z1.2 F21000 G1 X140.239 Y109.78 G1 X137.783 Y109.697 G1 X132.57 Y109.521 G1 X130.588 Y109.51 G1 X130.497 Y109.451 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.555755 G1 F8774.752 G1 X130.334 Y109.566 E.00851 G1 X130.18 Y109.552 E.0066 G1 X130.067 Y109.434 E.00698 ;PATH_TASK id=1035 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.562527 G1 F8660.392 G1 X130.03 Y109.167 E.01163 G1 X130.078 Y108.882 E.0125 G1 X130.217 Y108.739 E.00861 G1 X130.337 Y108.748 E.0052 G1 X130.473 Y108.883 E.00825 G1 X130.549 Y109.168 E.01275 ;PATH_TASK id=1036 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X130.545 Y109.299 E.00565 ;PATH_TASK id=1034 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.555755 G1 F8774.752 G1 X130.509 Y109.413 E.00512 ;PATH_TASK id=1037 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T3000 G1 X130.615 Y109.461 F21000 G1 X130.587 Y109.512 G1 X130.587 Y109.512 G1 X130.905 Y109.724 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X130.694 Y109.937 E.01015 G1 X130.431 Y110.048 E.00966 G1 X130.116 Y110.047 E.01065 G1 X129.867 Y109.942 E.00913 G1 X129.671 Y109.739 E.00957 G1 X129.559 Y109.463 E.01009 G1 X129.544 Y109.153 E.01049 G1 X129.63 Y108.675 E.01645 G1 X129.81 Y108.422 E.01051 G1 X130.05 Y108.271 E.00957 G1 X130.254 Y108.237 E.00701 G1 X130.526 Y108.291 E.00938 G1 X130.765 Y108.45 E.00973 G1 X130.942 Y108.711 E.01069 G1 X130.999 Y108.927 E.00755 G1 X131.019 Y109.452 E.0178 G1 X130.92 Y109.687 E.00861 ;PATH_TASK id=1038 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X130.596 Y109.496 Z1.2 F21000 G1 X130.09 Y109.632 G1 X128.079 Y109.497 G1 X122.85 Y109.148 G1 X120.241 Y109.05 G1 X120.371 Y108.983 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.588975 G1 F8240.928 G1 X120.326 Y108.903 E.00416 G1 X120.371 Y108.677 E.01048 G1 X120.495 Y108.595 E.00676 G1 X120.689 Y108.595 E.00885 ;PATH_TASK id=1039 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.588561 G1 F8247.181 G1 X120.836 Y108.683 E.00779 G1 X120.884 Y108.896 E.00989 ;PATH_TASK id=1040 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X120.831 Y109.053 E.00751 G1 X120.661 Y109.136 E.00862 ;PATH_TASK id=1038 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.588975 G1 F8240.928 G1 X120.425 Y109.077 E.01102 G1 X120.391 Y109.018 E.00311 ;PATH_TASK id=1041 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T3000 G1 X120.28 Y109.108 F21000 G1 X120.25 Y109.065 G1 X120.246 Y109.058 G1 X119.913 Y109.245 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X119.824 Y108.968 E.00983 G1 X119.841 Y108.635 E.0113 G1 X119.96 Y108.377 E.00961 G1 X120.174 Y108.182 E.00979 G1 X120.447 Y108.082 E.00986 G1 X120.909 Y108.128 E.01571 G1 X121.161 Y108.28 E.00996 G1 X121.317 Y108.5 E.00914 G1 X121.395 Y108.816 E.01102 G1 X121.356 Y109.136 E.0109 G1 X121.216 Y109.384 E.00965 G1 X120.984 Y109.565 E.00992 G1 X120.704 Y109.64 E.00981 G1 X120.376 Y109.611 E.01115 G1 X120.112 Y109.477 E.01002 G1 X119.939 Y109.275 E.009 ;PATH_TASK id=1042 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X120.255 Y109.073 Z1.2 F21000 G1 X120.774 Y111.12 G1 X120.76 Y111.122 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.360048 G1 F10200 G1 X120.697 Y111.026 E.00303 ;PATH_TASK id=1043 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.362879 G1 X120.502 Y110.996 E.00524 G1 X120.397 Y111.071 E.00343 G1 X120.395 Y111.214 E.00379 G1 X120.502 Y111.308 E.00381 G1 X120.696 Y111.291 E.00518 ;PATH_TASK id=1044 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.360048 G1 X120.764 Y111.166 E.00375 G1 X120.76 Y111.122 E.00114 ;PATH_TASK id=1045 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T3000 G1 X120.774 Y111.12 F21000 G1 X120.764 Y111.238 G1 X120.763 Y111.24 G1 X121.088 Y111.438 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X120.91 Y111.62 E.00863 G1 X120.682 Y111.705 E.00824 G1 X120.394 Y111.687 E.00977 G1 X120.184 Y111.574 E.00806 G1 X120.034 Y111.374 E.00846 G1 X119.987 Y111.133 E.00831 G1 X120.043 Y110.897 E.00822 G1 X120.184 Y110.723 E.00759 G1 X120.486 Y110.606 E.01097 G1 X120.818 Y110.644 E.01129 G1 X121.017 Y110.78 E.00819 G1 X121.075 Y110.879 E.00387 G1 X121.156 Y111.231 E.01222 G1 X121.101 Y111.4 E.00602 ;PATH_TASK id=1046 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.2 F720 G1 X120.767 Y111.232 Z1.2 F21000 G1 X118.523 Y111.308 G1 X114.804 Y112.958 G1 X113.43 Y112.935 G1 X112.975 Y111.111 G1 X110.985 Y111.135 G1 X110.918 Y111.038 G1 Z.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.567998 G1 F8570.155 G1 X110.806 Y111.006 E.00508 G1 X110.69 Y110.745 E.01247 ;PATH_TASK id=1047 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.574955 G1 F8458.091 G1 X110.616 Y110.204 E.02415 ;PATH_TASK id=1048 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.583489 G1 F8324.561 G1 X110.63 Y109.375 E.03731 G1 X110.689 Y108.83 E.02464 ;PATH_TASK id=1049 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.577715 G1 F8414.44 G1 X110.839 Y108.465 E.01753 G1 X110.927 Y108.417 E.00447 G1 X111.031 Y108.522 E.00657 G1 X111.118 Y108.832 E.01432 ;PATH_TASK id=1050 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.583489 G1 F8324.561 G1 X111.17 Y109.388 E.02511 ;PATH_TASK id=1051 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 G1 X111.148 Y110.219 E.03736 ;PATH_TASK id=1052 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.574955 G1 F8458.091 G1 X111.068 Y110.745 E.02355 ;PATH_TASK id=1046 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 ;WIDTH:0.567998 G1 F8570.155 G1 X110.936 Y111.002 E.0126 ;PATH_TASK id=1053 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000 M204 T3000 G1 X111.037 Y111.086 F21000 G1 X110.984 Y111.136 G1 X110.982 Y111.138 G1 X111.189 Y111.458 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X110.972 Y111.537 E.00779 G1 X110.705 Y111.517 E.00909 G1 X110.492 Y111.397 E.00827 G1 X110.302 Y111.154 E.01043 G1 X110.222 Y110.884 E.00954 G1 X110.138 Y110.359 E.01799 G1 X110.12 Y109.857 E.017 G1 X110.135 Y109.352 E.01711 G1 X110.198 Y108.786 E.01929 G1 X110.351 Y108.282 E.01783 G1 X110.55 Y108.043 E.0105 G1 X110.839 Y107.916 E.01071 G1 X111.155 Y107.962 E.01081 G1 X111.37 Y108.13 E.00923 G1 X111.525 Y108.39 E.01025 G1 X111.632 Y108.876 E.01684 G1 X111.664 Y109.728 E.02886 G1 X111.638 Y110.252 E.01778 G1 X111.551 Y110.81 E.0191 G1 X111.381 Y111.262 E.01636 G1 X111.217 Y111.429 E.00792 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 M106 S242 ;LAYER_CHANGE ;Z:0.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;0.8 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;0.8 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1054 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 M204 T7000 M486 S0 G1 Z1.4 F720 G1 X152.846 Y114.346 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall G1 F10200 G1 X97.154 Y114.346 E1.88514 G1 X97.154 Y105.654 E.29424 G1 X152.846 Y105.654 E1.88514 G1 X152.846 Y114.306 E.29289 ;PATH_TASK id=1055 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 M204 T3000 G1 X152.889 Y114.306 F21000 G1 X152.889 Y114.389 G1 X153.275 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X96.725 Y114.775 E1.91415 G1 X96.725 Y105.225 E.32326 G1 X153.275 Y105.225 E1.91415 G1 X153.275 Y114.735 E.3219 ;PATH_TASK id=1056 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X152.889 Y114.389 Z1.4 F21000 G1 X151.75 Y114.389 G1 X151.75 Y113.947 G1 Z.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.433903 G1 F11509.452 G1 X152.447 Y113.947 E.02269 G1 X152.447 Y113.179 E.02497 G1 X152.134 Y113.595 E.01693 G1 X151.779 Y113.92 E.01564 ;PATH_TASK id=1057 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X152.385 Y110.069 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 ;WIDTH:0.631524 G1 F7645.209 G1 X152.312 Y110.069 E.0036 G1 X152.275 Y110.132 E.0036 G1 X152.312 Y110.196 E.0036 G1 X152.385 Y110.196 E.0036 G1 X152.402 Y110.167 E.00164 ;PATH_TASK id=1058 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X150.684 Y106.314 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 ;WIDTH:0.357964 G1 F12000 G1 X151.517 Y106.325 E.02182 G1 X151.857 Y106.364 E.00896 ;PATH_TASK id=1059 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 ;WIDTH:0.405597 G1 X152.098 Y106.449 E.00771 ;PATH_TASK id=1060 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 ;WIDTH:0.448129 G1 F11105.389 G1 X152.339 Y106.533 E.00861 G1 X152.438 Y106.605 E.00411 G1 X152.438 Y106.062 E.01828 ;PATH_TASK id=1061 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 ;WIDTH:0.436845 G1 F11423.516 G1 X152.181 Y106.046 E.00844 ;PATH_TASK id=1062 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 ;WIDTH:0.405597 G1 F12000 G1 X151.924 Y106.031 E.00777 ;PATH_TASK id=1063 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 ;WIDTH:0.378653 G1 X150.837 Y106.01 E.03035 G1 X150.684 Y106.01 E.00427 G1 X150.684 Y106.274 E.00736 ;PATH_TASK id=1064 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X148.324 Y106.407 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F11054.348 G1 X149.316 Y106.407 E.03359 G1 X149.43 Y106 E.01431 G1 X150.015 Y106 E.0198 G1 X150.327 Y106.312 E.01495 G1 X150.327 Y106.845 E.01806 G1 X148.122 Y106.808 E.07464 G2 X147.221 Y107.351 I.11 J1.202 E.03684 G1 X146.277 Y106.407 E.0452 G1 X142.132 Y106.407 E.1403 G1 X147.047 Y111.321 E.23527 G1 X147.023 Y111.55 E.00778 G2 X148.132 Y113.593 I2.459 J-.012 E.08198 G1 X145.173 Y113.593 E.10016 G1 X142.324 Y110.744 E.13639 G1 X140.575 Y113.14 E.10041 G1 X141.028 Y113.593 E.02169 G1 X143.028 Y113.593 E.0677 ;PATH_TASK id=1065 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X141.043 Y113.97 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.388948 G1 F12000 G1 X148.922 Y113.97 E.22668 ;PATH_TASK id=1066 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X147.292 Y108.34 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 M204 P1500 ;TYPE:Bridge ;WIDTH:0.4 G1 F3000 M106 S255 G1 X148.093 Y107.193 E.04153 G1 X148.133 Y107.19 E.00118 G1 X148.526 Y107.197 E.01168 G1 X147.476 Y108.699 E.05441 G1 X147.491 Y108.756 E.00176 G1 X147.516 Y108.815 E.0019 G1 X147.594 Y108.937 E.0043 G1 X147.634 Y108.983 E.00181 G1 X147.682 Y109.027 E.00193 G1 X148.957 Y107.204 E.06604 G1 X149.387 Y107.212 E.01279 M73 P85 R5 G1 X148.013 Y109.178 E.07123 G1 X148.245 Y109.223 E.00703 G1 X148.3 Y109.39 E.00523 G1 X149.818 Y107.219 E.07865 G1 X150.248 Y107.226 E.01279 G1 X147.445 Y111.236 E.14527 G1 X147.412 Y111.462 E.00677 G1 X147.407 Y111.511 E.00147 G1 X147.405 Y111.554 E.00127 G1 X147.413 Y111.663 E.00327 G1 X147.443 Y111.863 E.00598 G1 X151.085 Y106.652 E.18876 G1 X151.516 Y106.66 E.01278 G1 X147.558 Y112.321 E.20511 G1 X147.722 Y112.648 E.01086 G1 X147.744 Y112.679 E.00111 G1 X151.892 Y106.745 E.21495 G1 X152.075 Y106.826 E.00595 G1 X152.105 Y106.84 E.00098 G1 X152.167 Y106.875 E.0021 G1 X152.215 Y106.906 E.00171 G1 X147.981 Y112.963 E.21941 G1 X148.139 Y113.125 E.00673 G1 X148.175 Y113.153 E.00136 G1 X148.247 Y113.205 E.00263 G1 X152.479 Y107.151 E.21931 G1 X152.525 Y107.221 E.00249 G1 X152.525 Y107.708 E.01446 G1 X148.557 Y113.385 E.20565 G1 X148.697 Y113.459 E.00469 G1 X148.747 Y113.479 E.00162 G3 X148.893 Y113.528 I-.987 J3.168 E.00456 G1 X152.525 Y108.332 E.18824 G1 X152.525 Y108.955 E.0185 G1 X149.206 Y113.704 E.17204 G1 X149.246 Y113.727 E.00138 G1 X149.376 Y113.819 E.00472 G1 X149.448 Y113.927 E.00386 G1 X149.457 Y113.967 E.00123 G1 X151.935 Y110.423 E.12839 G1 X152.016 Y110.469 E.00277 G1 X152.086 Y110.516 E.00251 G1 X152.12 Y110.542 E.00126 G1 X152.2 Y110.612 E.00316 G1 X152.224 Y110.633 E.00094 G1 X149.852 Y114.025 E.1229 G1 X149.99 Y114.025 E.0041 G1 X150.057 Y113.874 E.00491 G1 X150.343 Y113.687 E.01015 G1 X150.474 Y113.759 E.00443 G1 X152.439 Y110.949 E.1018 G1 X152.456 Y110.988 E.00129 G1 X152.478 Y111.045 E.00181 G1 X152.489 Y111.076 E.00098 G1 X152.525 Y111.208 E.00406 G1 X152.525 Y111.448 E.00711 G1 X150.723 Y114.025 E.09338 G1 X150.856 Y114.025 E.00395 G1 X150.943 Y113.99 E.00279 G1 X150.998 Y113.966 E.00176 G1 X151.106 Y113.914 E.00358 G1 X151.219 Y113.853 E.0038 G1 X151.323 Y113.79 E.00362 G1 X152.686 Y111.841 E.07061 ;PATH_TASK id=1067 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X142.307 Y106.03 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.388948 G1 F12000 M106 S242 G1 X148.99 Y106.03 E.19231 ;PATH_TASK id=1068 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X139.58 Y106 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F11054.348 G1 X137.58 Y106 E.0677 G1 X138.45 Y106.87 E.04168 G2 X138.029 Y107.547 I.731 J.925 E.02752 G1 X138.014 Y107.903 E.01208 G2 X137.731 Y108.054 I.443 J1.173 E.01088 G1 X137.682 Y108.094 E.00216 G2 X137.411 Y109.973 I1.498 J1.175 E.06725 G1 X133.435 Y106 E.19026 G1 X129.29 Y106 E.1403 G1 X129.764 Y106.474 E.02273 G2 X127.681 Y108.536 I.479 J2.567 E.10533 G1 X125.145 Y106 E.12144 G1 X121 Y106 E.1403 G1 X121.36 Y106.36 E.01724 G3 X123.261 Y108.261 I-.556 J2.457 E.09599 G1 X129 Y114 E.27476 G1 X124.855 Y114 E.1403 G1 X122.915 Y112.06 E.09289 G2 X122.977 Y110.421 I-2.127 J-.901 E.05674 G1 X122.915 Y110.29 E.00493 G1 X123.008 Y110.137 E.00606 ;PATH_TASK id=1069 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X120.09 Y106.532 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 M204 P1500 ;TYPE:Bridge ;WIDTH:0.4 G1 F3000 M106 S255 G1 X122.33 Y107.335 E.07066 G1 X122.467 Y107.475 E.00582 G1 X122.499 Y107.514 E.00151 G1 X122.621 Y107.687 E.00627 G1 X122.702 Y107.848 E.00536 G1 X119.737 Y106.785 E.09355 G1 X119.408 Y106.924 E.0106 G1 X119.281 Y107.001 E.0044 G1 X122.878 Y108.291 E.11346 G1 X122.945 Y108.694 E.01213 G1 X118.953 Y107.263 E.1259 G1 X118.87 Y107.333 E.00324 G1 X118.726 Y107.498 E.0065 G1 X118.694 Y107.549 E.00179 G1 X122.935 Y109.07 E.13379 G1 X122.9 Y109.373 E.00907 G1 X122.891 Y109.433 E.0018 G1 X118.497 Y107.858 E.13859 G1 X118.486 Y107.876 E.00063 G1 X118.441 Y107.957 E.00276 G1 X118.399 Y108.078 E.0038 G1 X118.37 Y108.192 E.00348 G1 X122.759 Y109.765 E.13844 G1 X122.658 Y109.983 E.00712 G1 X122.633 Y110.027 E.00149 G1 X122.618 Y110.05 E.00082 G1 X122.589 Y110.084 E.00132 G1 X118.285 Y108.54 E.13578 G1 X118.268 Y108.654 E.00342 G1 X118.268 Y108.723 E.00203 G1 X118.277 Y108.917 E.00577 G1 X122.571 Y110.457 E.13543 G1 X122.59 Y110.493 E.00121 G1 X122.62 Y110.558 E.00214 G1 X122.636 Y110.603 E.00141 G1 X122.669 Y110.746 E.00437 G1 X122.684 Y110.877 E.0039 G1 X118.304 Y109.306 E.13816 G1 X118.306 Y109.316 E.00031 G1 X118.338 Y109.424 E.00332 G1 X118.46 Y109.741 E.01011 G1 X122.715 Y111.267 E.13419 G1 X122.705 Y111.342 E.00224 G1 X122.65 Y111.623 E.0085 G1 X118.652 Y110.189 E.12611 G1 X118.656 Y110.261 E.00214 G1 X118.565 Y110.429 E.00567 G1 X118.555 Y110.451 E.0007 G1 X118.534 Y110.51 E.00187 G1 X118.53 Y110.525 E.00046 G1 X122.543 Y111.964 E.12658 G1 X122.535 Y111.982 E.00058 G1 X122.36 Y112.278 E.01021 G1 X118.45 Y110.876 E.12333 G1 X118.446 Y110.893 E.00051 G1 X118.428 Y111.042 E.00446 G1 X118.426 Y111.075 E.001 G1 X118.426 Y111.117 E.00125 G1 X118.43 Y111.159 E.00124 G1 X118.441 Y111.252 E.00277 G1 X122.107 Y112.566 E.11563 G1 X121.859 Y112.777 E.00965 G1 X121.776 Y112.827 E.00288 G1 X118.491 Y111.649 E.10364 G1 X118.494 Y111.666 E.00053 G1 X118.507 Y111.713 E.00143 G1 X118.547 Y111.813 E.00322 G3 X118.685 Y112.098 I-6.088 J3.111 E.00938 G1 X121.308 Y113.039 E.08276 G1 X121.274 Y113.052 E.0011 G1 X121.131 Y113.093 E.0044 G1 X121.077 Y113.1 E.00163 G1 X120.547 Y113.145 E.01581 G1 X118.779 Y112.511 E.05576 ;PATH_TASK id=1070 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X117.926 Y109.361 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F11054.348 M106 S242 G3 X118.304 Y107.449 I2.585 J-.482 E.06759 G1 X116.855 Y106 E.06939 G1 X112.71 Y106 E.1403 G1 X113.314 Y106.604 E.02891 G1 X113.453 Y106.475 E.00643 G3 X115.291 Y106.395 I.991 J1.631 E.06495 G3 X115.836 Y107.282 I-.659 J1.017 E.03644 G1 X115.806 Y109.096 E.06138 G1 X116.196 Y109.486 E.01871 G3 X116.859 Y109.918 I-.054 J.808 E.02797 G1 X116.997 Y110.287 E.01333 G1 X118.069 Y111.359 E.0513 G2 X120.202 Y113.492 I2.343 J-.21 E.11086 G1 X120.71 Y114 E.02434 G1 X116.565 Y114 E.1403 G1 X115.418 Y112.853 E.05494 G3 X113.988 Y113.419 I-1.113 J-.723 E.0555 G3 X113.037 Y112.717 I-.001 J-.994 E.04286 G3 X112.966 Y112.372 I1.436 J-.475 E.01194 G1 X112.967 Y112.274 E.00333 G3 X111.79 Y113.202 I-2.035 J-1.369 E.05159 G1 X111.665 Y113.245 E.00446 G1 X112.42 Y114 E.03617 G1 X110.42 Y114 E.0677 ;PATH_TASK id=1071 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X108.79 Y107.687 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 M204 P1500 ;TYPE:Bridge ;WIDTH:0.4 G1 F3000 M106 S255 G1 X108.73 Y111.224 E.10506 G1 X108.82 Y111.517 E.0091 G1 X108.848 Y111.595 E.00245 G1 X108.879 Y111.656 E.00204 G1 X109.074 Y112.002 E.01179 G1 X109.152 Y107.374 E.13743 G1 X109.256 Y107.237 E.00509 G1 X109.292 Y107.195 E.00166 G2 X109.516 Y106.977 I-4.954 J-5.34 E.00928 G1 X109.424 Y112.422 E.16169 G1 X109.566 Y112.555 E.00577 G1 X109.76 Y112.685 E.00693 G1 X109.776 Y112.693 E.00055 G1 X109.878 Y106.728 E.17713 G2 X110.105 Y106.617 I-7.355 J-15.301 E.00752 G1 X110.145 Y106.602 E.00127 G1 X110.237 Y106.572 E.00287 G1 X110.131 Y112.855 E.18657 G1 X110.145 Y112.861 E.00047 G1 X110.366 Y112.923 E.00681 G1 X110.486 Y112.936 E.0036 G1 X110.596 Y106.507 E.19092 G2 X110.79 Y106.48 I-1.188 J-9.064 E.00582 G1 X110.892 Y106.472 E.00304 G1 X110.953 Y106.475 E.00182 G1 X110.843 Y112.976 E.19308 G1 X110.934 Y112.982 E.00273 G1 X111.052 Y112.972 E.00349 G1 X111.2 Y112.947 E.00448 G1 X111.31 Y106.508 E.19121 G1 X111.321 Y106.509 E.00033 G1 X111.499 Y106.55 E.00542 G1 X111.665 Y106.61 E.00525 G1 X111.559 Y112.877 E.18612 G1 X111.717 Y112.823 E.00497 G1 X111.919 Y112.718 E.00675 G1 X112.02 Y106.765 E.17676 G1 X112.087 Y106.803 E.0023 G1 X112.372 Y107.028 E.01079 G1 X112.28 Y112.47 E.1616 G1 X112.563 Y112.176 E.01214 G1 X112.616 Y112.114 E.0024 G1 X112.644 Y112.07 E.00156 G1 X112.722 Y107.46 E.1369 G1 X112.936 Y107.778 E.01138 G1 X113.075 Y107.737 E.00428 G1 X113.006 Y111.792 E.12041 G1 X113.355 Y111.881 E.01071 G1 X113.348 Y112.371 E.01454 G1 X113.352 Y112.436 E.00195 G1 X113.44 Y107.232 E.15454 G1 X113.466 Y107.072 E.00482 G1 X113.503 Y106.979 E.00297 G1 X113.539 Y106.917 E.00214 G1 X113.544 Y106.911 E.0002 G1 X113.774 Y106.699 E.00929 G1 X113.781 Y106.694 E.00027 G1 X113.807 Y106.685 E.0008 G1 X113.7 Y112.954 E.18617 G1 X114.012 Y113.036 E.00958 G1 X114.056 Y113.038 E.0013 G1 X114.165 Y106.612 E.1908 G1 X114.522 Y106.618 E.0106 G1 X114.413 Y113.044 E.1908 G1 X114.467 Y113.044 E.00161 G1 X114.577 Y113.035 E.00327 G1 X114.771 Y112.968 E.00611 G1 X114.879 Y106.657 E.18742 G1 X115.187 Y106.764 E.00969 G1 X115.198 Y106.772 E.0004 G1 X115.233 Y106.817 E.00171 G1 X115.135 Y112.591 E.17146 G1 X115.254 Y112.424 E.00609 G1 X115.279 Y112.396 E.00112 G1 X115.499 Y112.197 E.00881 G1 X115.54 Y109.781 E.07172 G1 X115.616 Y109.86 E.00324 G1 X115.896 Y109.864 E.00831 G1 X115.86 Y111.936 E.06154 G1 X115.943 Y111.884 E.0029 G1 X116.221 Y111.744 E.00924 G1 X116.253 Y109.869 E.05568 G1 X116.269 Y109.87 E.00048 G1 X116.279 Y109.872 E.00033 G1 X116.305 Y109.887 E.00088 G1 X116.452 Y110.006 E.00561 G1 X116.513 Y110.081 E.00289 G1 X116.566 Y110.174 E.00316 G1 X116.582 Y110.213 E.00126 G1 X116.603 Y110.282 E.00214 G1 X116.579 Y111.672 E.04128 ;PATH_TASK id=1072 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X106.564 Y106 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F11054.348 M106 S242 G1 X108.564 Y106 E.0677 G1 X109.259 Y106.694 E.03325 G2 X108.244 Y108.831 I2.042 J2.28 E.08222 G2 X108.178 Y109.724 I5.307 J.842 E.03034 G1 X106.118 Y107.698 E.09779 G1 X106.09 Y109.316 E.05479 G3 X106.934 Y109.496 I.247 J.912 E.03032 G3 X107.289 Y111.012 I-1.355 J1.117 E.0546 G3 X106.748 Y111.885 I-1.034 J-.036 E.0364 G2 X106.364 Y112.089 I24.003 J45.719 E.01471 G1 X108.275 Y114 E.0915 G1 X104.13 Y114 E.1403 G1 X102.813 Y112.683 E.06305 G3 X99.478 Y112.68 I-1.665 J-2.499 E.1197 G3 X98.876 Y109.377 I1.466 J-1.973 E.12508 G1 X99.14 Y109.01 E.01529 G1 X97.5 Y107.37 E.07854 G1 X97.5 Y111.515 E.1403 G1 X99.985 Y114 E.11899 G1 X97.985 Y114 E.0677 ;PATH_TASK id=1073 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X99.075 Y111.94 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 M204 P1500 ;TYPE:Bridge ;WIDTH:0.4 G1 F3000 M106 S255 G1 X99.118 Y109.399 E.07545 ;PATH_TASK id=1074 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 X99.136 Y108.378 F21000 G1 F3000 G1 X99.167 Y106.519 E.0552 G1 X99.178 Y106.503 E.00058 G1 X99.531 Y106.143 E.01496 G1 X99.493 Y108.354 E.06566 G1 X99.711 Y108.395 E.00658 G1 X99.84 Y108.787 E.01226 G1 X99.633 Y109.011 E.00907 G1 X99.479 Y109.2 E.00723 G1 X99.429 Y112.118 E.08666 G1 X99.606 Y112.299 E.00751 G1 X99.781 Y112.429 E.00648 G1 X99.891 Y105.975 E.19168 G1 X100.248 Y105.975 E.0106 G1 X100.135 Y112.618 E.19727 G1 X100.166 Y112.634 E.00106 G1 X100.367 Y112.704 E.00631 G1 X100.49 Y112.728 E.00372 G1 X100.605 Y105.975 E.20056 G1 X100.962 Y105.975 E.0106 G1 X100.846 Y112.797 E.20259 G1 X100.86 Y112.799 E.0004 G1 X100.998 Y112.812 E.00412 G1 X101.203 Y112.805 E.00611 G1 X101.319 Y105.975 E.20283 G1 X101.676 Y105.975 E.0106 G1 X101.561 Y112.788 E.20234 G1 X101.615 Y112.783 E.00161 G1 X101.685 Y112.766 E.00216 G1 X101.919 Y112.698 E.00723 G1 X102.03 Y106.179 E.19359 G1 X102.056 Y106.212 E.00125 G1 X102.384 Y106.381 E.01095 G1 X102.335 Y109.271 E.08582 G1 X102.083 Y109.483 E.00978 G1 X102.214 Y109.923 E.01362 G1 X102.323 Y109.936 E.00328 G1 X102.279 Y112.568 E.07817 G1 X102.329 Y112.545 E.00166 G1 X102.64 Y112.34 E.01103 G1 X102.68 Y109.979 E.07012 G1 X102.88 Y110.003 E.00597 G1 X102.922 Y110.01 E.00128 G1 X102.93 Y110.013 E.00026 G1 X103.035 Y110.077 E.00364 G1 X102.999 Y112.223 E.06374 ;PATH_TASK id=1075 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X102.693 Y109.176 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 G1 F3000 G1 X102.74 Y106.418 E.08191 G1 X102.961 Y106.422 E.00654 G1 X102.968 Y106.423 E.00023 G1 X103.097 Y106.469 E.00406 G1 X103.057 Y108.81 E.06951 ;PATH_TASK id=1076 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X103.454 Y106.428 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 G1 F3000 G1 X103.421 Y108.41 E.05884 G1 X103.702 Y108.5 E.00877 G1 X103.675 Y110.055 E.04616 G1 X103.39 Y110.212 E.00968 G1 X103.363 Y111.816 E.04762 G1 X103.644 Y111.917 E.00887 G1 X103.639 Y112.189 E.00809 G1 X103.657 Y112.362 E.00516 G1 X103.692 Y112.47 E.00338 G1 X103.708 Y112.502 E.00104 G1 X103.806 Y106.736 E.17122 G1 X103.842 Y106.737 E.00107 G1 X103.984 Y106.587 E.00612 G1 X103.992 Y106.582 E.00028 G1 X104.167 Y106.506 E.00568 G1 X104.06 Y112.812 E.18727 G1 X104.302 Y112.871 E.00741 G1 X104.416 Y112.874 E.00338 G1 X104.525 Y106.448 E.1908 G1 X104.883 Y106.454 E.0106 G1 X104.773 Y112.878 E.19075 G1 X104.874 Y112.868 E.003 G1 X105.067 Y112.801 E.00607 G1 X105.075 Y112.797 E.00027 G1 X105.133 Y112.745 E.0023 G1 X105.239 Y106.517 E.18497 G1 X105.485 Y106.604 E.00776 G1 X105.496 Y106.612 E.0004 G1 X105.592 Y106.741 E.00477 G1 X105.497 Y112.327 E.16588 G1 X105.545 Y112.259 E.00248 G1 X105.57 Y112.231 E.00112 G1 X105.86 Y111.968 E.01162 G1 X105.899 Y109.688 E.0677 G1 X105.905 Y109.694 E.00025 G1 X106.256 Y109.703 E.01043 G1 X106.221 Y111.726 E.06008 G1 X106.535 Y111.568 E.01043 G1 X106.582 Y111.538 E.00165 G1 X106.615 Y109.558 E.05878 ;PATH_TASK id=1077 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X131.145 Y114 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F11054.348 M106 S242 G1 X133.145 Y114 E.0677 G1 X132.058 Y112.913 E.05205 G1 X132.105 Y112.867 E.00223 G2 X133.049 Y109.759 I-3.465 J-2.749 E.1126 G1 X137.29 Y114 E.20305 G1 X138.527 Y114 E.04187 G1 X138.736 Y113.758 E.01083 G3 X138.329 Y113.589 I.074 J-.754 E.01512 ;PATH_TASK id=1078 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 X139.05 Y113.97 F21000 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.388948 G1 F12000 G1 X139.732 Y113.97 E.01962 ;PATH_TASK id=1079 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 X139.875 Y113.48 F21000 M204 P1500 ;TYPE:Bridge ;WIDTH:0.4 G1 F3000 M106 S255 G1 X142.492 Y109.845 E.13298 G1 X142.522 Y109.773 E.00233 G1 X142.543 Y109.698 E.0023 G1 X142.55 Y109.664 E.00105 G1 X142.555 Y109.619 E.00134 G1 X142.558 Y109.569 E.00149 G1 X142.565 Y109.132 E.01299 G1 X139.456 Y113.449 E.15797 G1 X139.022 Y113.442 E.01291 G1 X142.487 Y108.629 E.1761 G1 X142.484 Y108.623 E.00021 G1 X142.363 Y108.467 E.00586 G1 X142.357 Y108.462 E.00023 G1 X142.228 Y108.378 E.00457 G1 X138.665 Y113.327 E.18108 G1 X138.574 Y113.295 E.00285 G1 X138.563 Y113.287 E.0004 G1 X138.406 Y113.076 E.00783 G1 X141.858 Y108.281 E.17543 G1 X141.423 Y108.273 E.01291 G1 X138.317 Y112.588 E.15785 G1 X138.327 Y111.962 E.01859 G1 X140.988 Y108.266 E.13522 G1 X140.615 Y108.26 E.01108 G1 X140.58 Y108.223 E.00153 G1 X138.338 Y111.336 E.1139 G1 X138.349 Y110.71 E.01859 G1 X140.418 Y107.836 E.10514 G1 X140.419 Y107.737 E.00296 G1 X140.372 Y107.476 E.00786 G1 X140.368 Y107.466 E.00032 G1 X140.305 Y107.382 E.00313 G1 X138.272 Y110.205 E.1033 G1 X138.227 Y110.14 E.00235 G1 X137.95 Y110.042 E.00874 G1 X140.033 Y107.149 E.10585 G1 X139.75 Y107.049 E.00892 G1 X139.742 Y107.047 E.00022 G1 X139.667 Y107.046 E.00225 G1 X137.728 Y109.738 E.0985 G1 X137.7 Y109.619 E.00365 G1 X137.695 Y109.571 E.00142 G1 X137.694 Y109.515 E.00167 G1 X137.7 Y109.167 E.01034 G1 X139.232 Y107.039 E.07787 G1 X139.067 Y107.036 E.0049 G1 X138.956 Y107.046 E.00331 G1 X138.745 Y107.12 E.00664 G1 X138.737 Y107.125 E.00028 G1 X138.715 Y107.146 E.00092 G1 X138.237 Y107.809 E.02424 ;PATH_TASK id=1080 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.4 F720 G1 X132.435 Y107.933 Z1.4 F21000 G1 Z.8 F720 G1 E.7 F1500 G1 F3000 G1 X132.226 Y112.04 E.12212 G1 X132.074 Y112.314 E.0093 G1 X131.955 Y112.473 E.00588 G1 X131.92 Y112.514 E.00161 G1 X131.84 Y112.592 E.00333 G1 X132.089 Y107.703 E.14537 G1 X132.046 Y107.639 E.00229 G1 X131.905 Y107.483 E.00625 G1 X131.749 Y107.355 E.00598 G1 X131.466 Y112.923 E.16553 G1 X131.419 Y112.955 E.0017 G1 X131.098 Y113.12 E.0107 G1 X131.404 Y107.103 E.17888 G1 X131.345 Y107.068 E.00205 G1 X131.055 Y106.953 E.00927 G1 X130.735 Y113.233 E.18671 G1 X130.374 Y113.299 E.01089 G1 X130.702 Y106.848 E.19179 G1 X130.347 Y106.808 E.01062 G1 X130.017 Y113.292 E.19276 G1 X129.722 Y113.269 E.00878 G1 X129.661 Y113.255 E.00186 G1 X129.988 Y106.829 E.19104 G1 X129.673 Y106.873 E.00945 G1 X129.628 Y106.887 E.0014 G1 X129.309 Y113.142 E.18596 G1 X129.118 Y113.067 E.0061 G1 X128.96 Y112.973 E.00545 G1 X129.263 Y107.036 E.17649 G1 X129.089 Y107.118 E.00568 G1 X128.901 Y107.245 E.00675 G1 X128.894 Y107.251 E.00028 G1 X128.617 Y112.695 E.16184 G1 X128.603 Y112.682 E.00056 G1 X128.45 Y112.503 E.00701 G1 X128.283 Y112.229 E.00952 G1 X128.517 Y107.625 E.13686 G1 X128.447 Y107.714 E.00337 G1 X128.217 Y108.114 E.01369 G1 X128.144 Y108.289 E.00563 G1 X128.122 Y108.371 E.00253 G1 X128.025 Y110.278 E.0567 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 M106 S250 ;LAYER_CHANGE ;Z:1 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;1 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;1 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1081 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 M486 S0 G1 Z1.6 F720 G1 X152.846 Y114.346 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F10200 M106 S250 G1 X97.154 Y114.346 E1.88514 G1 X97.154 Y105.654 E.29424 G1 X152.846 Y105.654 E1.88514 G1 X152.846 Y114.306 E.29289 ;PATH_TASK id=1082 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 M204 T3000 G1 X152.889 Y114.306 F21000 G1 X152.889 Y114.389 G1 X153.275 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X96.725 Y114.775 E1.91415 G1 X96.725 Y105.225 E.32326 G1 X153.275 Y105.225 E1.91415 G1 X153.275 Y114.735 E.3219 ;PATH_TASK id=1083 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 M73 P86 R5 G1 Z1.6 F720 G1 X152.889 Y114.389 Z1.6 F21000 G1 X149.637 Y113.423 G1 Z1 F720 G1 E.7 F1500 M204 P1500 ;TYPE:Internal Bridge ;WIDTH:0.4 ;HEIGHT:0.4 G1 F4500 M106 S255 G1 X149.16 Y113.979 E.03826 G1 X148.567 Y113.979 E.03098 G1 X149.118 Y113.337 E.04418 G2 X149.013 Y113.282 I-.409 J.652 E.00622 G2 X148.844 Y113.224 I-1.344 J3.671 E.00934 G1 X148.807 Y113.21 E.00208 G1 X148.688 Y113.147 E.007 G1 X147.974 Y113.979 E.05725 G1 X147.381 Y113.979 E.03098 G1 X148.304 Y112.904 E.07398 G1 X148.064 Y112.66 E.01788 G1 X147.999 Y112.569 E.00586 G1 X146.788 Y113.979 E.0971 G1 X146.195 Y113.979 E.03098 G1 X147.778 Y112.135 E.12699 G1 X147.74 Y112.011 E.00674 G1 X147.683 Y111.632 E.02005 G1 X147.678 Y111.561 E.00372 G1 X145.602 Y113.979 E.16648 G1 X145.009 Y113.979 E.03098 G1 X147.987 Y110.509 E.2389 G1 X148.012 Y110.463 E.00271 G1 X148.053 Y110.405 E.00375 G1 X148.371 Y110.015 E.02626 G1 X148.681 Y109.681 E.0238 G1 X148.522 Y109.195 E.0267 G1 X144.416 Y113.979 E.32936 G1 X143.823 Y113.979 E.03098 G1 X148.158 Y108.929 E.34769 G1 X148.045 Y108.907 E.00601 G1 X147.828 Y108.801 E.0126 G1 X147.763 Y108.698 E.00638 G1 X143.23 Y113.979 E.36362 G1 X142.637 Y113.979 E.03098 G1 X148.793 Y106.807 E.49378 G1 X148.855 Y106.466 E.01813 G1 X148.979 Y106.021 E.02412 G1 X148.875 Y106.021 E.00544 G1 X142.044 Y113.979 E.54791 G1 X141.451 Y113.979 E.03098 G1 X148.282 Y106.021 E.54791 G1 X147.689 Y106.021 E.03098 G1 X141.036 Y113.772 E.53365 G1 X140.878 Y113.265 E.02775 G1 X147.096 Y106.021 E.49873 G1 X146.502 Y106.021 E.03098 G1 X139.683 Y113.966 E.54704 G1 X139.663 Y113.979 E.00123 G1 X139.111 Y113.979 E.02886 G1 X140.892 Y111.904 E.14287 G1 X140.875 Y111.887 E.00125 G1 X145.909 Y106.021 E.40386 G1 X145.316 Y106.021 E.03098 G1 X142.287 Y109.551 E.24304 G1 X142.295 Y109.036 E.02694 G2 X142.291 Y108.873 I-.907 J-.057 E.00852 G1 X142.286 Y108.861 E.00068 G1 X144.723 Y106.021 E.1955 G1 X144.13 Y106.021 E.03098 G1 X141.945 Y108.567 E.17532 G1 X141.874 Y108.553 E.00377 G1 X141.372 Y108.544 E.02624 G1 X143.537 Y106.021 E.17371 G1 X142.944 Y106.021 E.03098 G1 X140.616 Y108.734 E.18677 ;PATH_TASK id=1084 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X140.988 Y109.004 F21000 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.526574 ;HEIGHT:0.2 G1 F9304.171 M106 S250 G1 X141.686 Y109.703 E.03973 G1 X141.819 Y109.464 E.01101 G1 X141.828 Y109.025 E.01763 G1 X141.028 Y109.005 E.0322 ;PATH_TASK id=1085 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X139.172 Y107.143 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;WIDTH:0.587648 G1 F8261.007 G3 X140.093 Y108.069 I-63.498 J64.05 E.05918 G1 X140.347 Y108.324 E.01629 G1 X140.442 Y108.212 E.00663 G1 X140.324 Y107.976 E.01199 G1 X140.286 Y107.561 E.01888 G1 X140.231 Y107.445 E.00581 G1 X140.08 Y107.268 E.01053 G1 X139.68 Y107.143 E.01902 G1 X139.212 Y107.143 E.02119 ;PATH_TASK id=1086 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X138.641 Y106.999 F21000 ;WIDTH:0.450008 G1 F11054.12 G1 X140.218 Y108.576 E.07551 G1 X140.091 Y108.724 E.0066 G1 X140.314 Y108.955 E.01084 G1 X140.601 Y108.959 E.00973 G1 X141.707 Y110.065 E.05294 ;PATH_TASK id=1087 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X139.628 Y110.513 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;WIDTH:0.459448 G1 F10803.595 G1 X139.576 Y110.513 E.0018 G1 X139.55 Y110.558 E.0018 G1 X139.576 Y110.603 E.0018 G1 X139.628 Y110.603 E.0018 G1 X139.635 Y110.593 E.00042 ;PATH_TASK id=1088 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X138.51 Y109.384 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;WIDTH:0.387151 G1 F12000 G1 X138.806 Y109.596 E.01043 G1 X138.993 Y109.813 E.0082 ;PATH_TASK id=1089 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.443848 G1 F11223.981 G1 X139.193 Y110.397 E.02058 G1 X139.166 Y112.006 E.05366 G1 X139.466 Y111.624 E.01621 G1 X139.648 Y111.195 E.01554 G1 X140.143 Y110.516 E.02801 G1 X139.785 Y110.158 E.01689 G1 X139.255 Y109.595 E.02579 ;PATH_TASK id=1090 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.399434 G1 F12000 G2 X138.622 Y108.957 I-58.189 J57.111 E.02664 G1 X138.515 Y109.021 E.00368 G1 X138.511 Y109.344 E.00956 ;PATH_TASK id=1091 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X138.128 Y109.508 F21000 ;WIDTH:0.449999 G1 F11054.365 G1 X138.199 Y109.666 E.00587 G1 X138.414 Y109.758 E.00792 G1 X138.615 Y109.941 E.00921 G1 X138.678 Y110.032 E.00373 G1 X138.786 Y110.39 E.01267 G1 X138.749 Y112.725 E.07904 G1 X138.83 Y112.914 E.00696 G1 X138.9 Y112.942 E.00253 G1 X139.896 Y111.781 E.05175 G1 X139.868 Y111.692 E.00316 G1 X139.976 Y111.435 E.00946 G1 X140.677 Y110.475 E.04023 G1 X138.65 Y108.448 E.09702 G1 X138.345 Y108.68 E.01296 G1 X138.2 Y108.762 E.00565 G1 X138.136 Y108.979 E.00765 G1 X138.129 Y109.468 E.01655 ;PATH_TASK id=1092 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X137.72 Y109.555 F21000 ;WIDTH:0.449999 G1 F11054.364 G1 X137.779 Y109.79 E.00819 G1 X137.945 Y110.003 E.00915 G1 X138.257 Y110.145 E.0116 G1 X138.379 Y110.383 E.00905 G1 X138.339 Y112.742 E.07986 G1 X138.381 Y112.983 E.00828 G1 X138.567 Y113.248 E.01096 G1 X139.031 Y113.414 E.01666 G1 X140.317 Y111.915 E.06687 G1 X140.269 Y111.761 E.00548 G1 X140.593 Y111.281 E.01959 G1 X141.211 Y110.433 E.03552 G1 X138.44 Y107.662 E.13265 G1 X138.419 Y108.024 E.01227 G1 X138.305 Y108.229 E.00793 G1 X137.987 Y108.38 E.0119 G1 X137.8 Y108.608 E.01 G1 X137.728 Y108.988 E.01311 G1 X137.721 Y109.515 E.01783 ;PATH_TASK id=1093 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X139.58 Y106 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F11054.348 G1 X137.58 Y106 E.0677 G1 X138.45 Y106.87 E.04168 G2 X138.029 Y107.547 I.732 J.925 E.02752 G1 X138.014 Y107.927 E.01287 G2 X137.731 Y108.054 I.212 J.85 E.01054 G1 X137.682 Y108.094 E.00216 G2 X137.411 Y109.973 I1.498 J1.175 E.06725 G1 X133.435 Y106 E.19026 G1 X129.29 Y106 E.1403 G1 X129.765 Y106.475 E.02274 G2 X127.681 Y108.536 I.478 J2.566 E.10534 G1 X125.145 Y106 E.12144 G1 X121 Y106 E.1403 G1 X121.363 Y106.363 E.01738 G3 X123.261 Y108.261 I-.602 J2.5 E.0956 G1 X129 Y114 E.27476 G1 X124.855 Y114 E.1403 G1 X122.915 Y112.06 E.09289 G2 X123.001 Y110.489 I-2.137 J-.905 E.05433 G1 X122.949 Y110.364 E.00458 G3 X122.991 Y110.172 I.109 J-.077 E.00748 G1 X123.007 Y110.139 E.00123 ;PATH_TASK id=1094 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X123.071 Y108.485 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.449999 G1 F11054.364 G1 X121.366 Y106.78 E.0816 G1 X120.949 Y106.688 E.01445 G1 X120.823 Y106.671 E.00433 G1 X120.675 Y106.665 E.00499 G1 X122.928 Y108.918 E.10782 G1 X122.875 Y109.37 E.01543 G1 X122.866 Y109.431 E.00209 G1 X120.146 Y106.712 E.13017 G1 X119.965 Y106.735 E.00619 G1 X119.814 Y106.779 E.00532 G1 X119.69 Y106.832 E.00455 G1 X122.698 Y109.839 E.14396 G1 X122.636 Y109.972 E.00496 G1 X122.611 Y110.014 E.00164 G1 X122.512 Y110.139 E.00543 G1 X122.504 Y110.221 E.00277 G1 X119.301 Y107.018 E.15331 G1 X119.232 Y107.061 E.00275 G1 X118.98 Y107.273 E.01114 G1 X122.669 Y110.961 E.17656 G1 X122.688 Y111.139 E.00606 G1 X122.692 Y111.215 E.00258 G1 X122.689 Y111.276 E.00205 G1 X122.68 Y111.337 E.0021 G1 X122.645 Y111.514 E.00611 G1 X118.706 Y107.575 E.18856 G1 X118.507 Y107.888 E.01256 G1 X118.485 Y107.929 E.00158 G1 X122.517 Y111.961 E.19302 G1 X122.513 Y111.97 E.00033 G1 X122.316 Y112.304 E.01313 G1 X122.301 Y112.321 E.00076 G1 X118.351 Y108.371 E.1891 G1 X118.313 Y108.521 E.00526 G1 X118.293 Y108.654 E.00453 G1 X118.293 Y108.722 E.0023 G1 X118.301 Y108.897 E.00593 G1 X122.016 Y112.611 E.1778 G1 X121.844 Y112.757 E.00763 G1 X121.683 Y112.854 E.00636 G1 X118.438 Y109.609 E.15533 G1 X118.525 Y109.829 E.00801 G1 X118.555 Y109.892 E.00234 G1 X118.669 Y110.055 E.00673 G1 X118.681 Y110.267 E.00719 G1 X118.624 Y110.371 E.00403 G1 X121.277 Y113.024 E.12699 G1 X121.267 Y113.028 E.00038 G1 X121.127 Y113.068 E.0049 G1 X121.074 Y113.075 E.0018 G1 X120.778 Y113.101 E.01008 G1 X118.491 Y110.813 E.10948 G1 X118.471 Y110.896 E.00289 G1 X118.452 Y111.045 E.00508 G1 X118.455 Y111.116 E.00239 G1 X118.48 Y111.379 E.00893 G1 X120.397 Y113.296 E.09177 ;PATH_TASK id=1095 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X118.71 Y114 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F11054.348 G1 X120.71 Y114 E.0677 G1 X120.202 Y113.492 E.02434 G3 X118.069 Y111.359 I.209 J-2.341 E.11083 G1 X116.997 Y110.287 E.05134 G2 X116.196 Y109.486 I-.949 J.149 E.04098 G1 X115.806 Y109.096 E.01871 G1 X115.836 Y107.282 E.06139 G2 X115.467 Y106.494 I-1.45 J.199 E.02992 G2 X114.098 Y106.229 I-1.105 J2.038 E.04794 G2 X113.314 Y106.604 I.065 J1.144 E.03017 G1 X112.71 Y106 E.02891 G1 X108.564 Y106 E.1403 G1 X109.261 Y106.696 E.03333 G1 X109.018 Y106.928 E.01138 G2 X108.178 Y109.724 I3.407 J2.548 E.10088 G1 X106.118 Y107.698 E.0978 G1 X106.09 Y109.316 E.05479 G1 X106.627 Y109.329 E.01817 G3 X106.934 Y109.496 I-.13 J.606 E.01199 G3 X107.289 Y111.012 I-1.355 J1.117 E.0546 G3 X106.364 Y112.089 I-1.211 J-.104 E.05133 G1 X108.275 Y114 E.0915 G1 X104.13 Y114 E.1403 G1 X102.813 Y112.683 E.06305 G3 X101.03 Y113.194 I-1.621 J-2.293 E.064 G3 X99.14 Y109.01 I-.044 J-2.499 E.19693 G1 X97.5 Y107.37 E.07854 G1 X97.5 Y111.515 E.1403 G1 X99.985 Y114 E.11899 G1 X97.985 Y114 E.0677 ;PATH_TASK id=1096 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X105.866 Y109.313 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.449999 G1 F11054.364 G1 X103.023 Y106.469 E.13611 G1 X102.958 Y106.446 E.00233 G1 X102.483 Y106.438 E.01609 G1 X102.399 Y106.417 E.00292 G1 X102.391 Y106.413 E.0003 G1 X106.884 Y110.906 E.21506 G1 X106.882 Y110.995 E.00303 G1 X106.869 Y111.098 E.0035 G1 X106.795 Y111.294 E.0071 G1 X106.756 Y111.354 E.0024 G1 X101.402 Y106 E.2563 G1 X100.826 Y106 E.01949 G1 X103.174 Y108.347 E.11238 G1 X103.198 Y108.312 E.00146 G1 X103.727 Y108.482 E.01881 G1 X103.72 Y108.894 E.01394 G1 X106.423 Y111.596 E.12936 G1 X106.222 Y111.697 E.00759 G1 X106.203 Y111.707 E.00074 G1 X106.055 Y111.805 E.00598 G1 X103.711 Y109.46 E.11224 G1 X103.701 Y110.026 E.01916 G1 X105.729 Y112.053 E.09706 G1 X105.552 Y112.213 E.00805 G1 X105.526 Y112.243 E.00136 G1 X105.45 Y112.35 E.00444 G1 X102.954 Y109.855 E.11944 ;PATH_TASK id=1097 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X103.057 Y108.806 F21000 G1 F11054.364 G1 X100.25 Y106 E.13435 G1 X99.675 Y106 E.01949 G1 X102.641 Y108.966 E.142 G1 X102.578 Y109.03 E.00304 G1 X102.529 Y109.075 E.00223 G1 X102.336 Y109.237 E.00854 G1 X99.406 Y106.306 E.14028 G1 X99.197 Y106.52 E.01011 G1 X99.137 Y106.613 E.00376 G1 X105.187 Y112.664 E.28963 G1 X105.056 Y112.778 E.0059 G1 X104.867 Y112.844 E.00679 G1 X104.799 Y112.851 E.00232 G1 X98.955 Y107.007 E.27972 G1 X98.953 Y107.026 E.00064 G1 X98.943 Y107.571 E.01845 G1 X103.132 Y111.759 E.20049 G1 X103.165 Y111.718 E.0018 G1 X103.669 Y111.899 E.01814 G1 X103.664 Y112.189 E.0098 G1 X103.676 Y112.304 E.00391 G1 X104.404 Y113.032 E.03483 ;PATH_TASK id=1098 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X103.006 Y112.21 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 G1 F11054.364 G1 X99.735 Y108.938 E.15661 G1 X99.651 Y109.028 E.00417 G1 X99.471 Y109.25 E.00967 G1 X102.574 Y112.353 E.14857 G1 X102.316 Y112.523 E.01046 G1 X102.215 Y112.57 E.00377 G1 X99.229 Y109.583 E.14296 G1 X99.043 Y109.973 E.01462 G1 X101.782 Y112.712 E.13111 G1 X101.68 Y112.742 E.00359 G1 X101.608 Y112.758 E.00249 G1 X101.516 Y112.768 E.00316 G1 X101.271 Y112.777 E.00828 G1 X98.933 Y110.439 E.11193 G1 X98.904 Y110.635 E.00671 G1 X98.897 Y110.733 E.00331 G1 X98.905 Y110.834 E.00344 G1 X98.932 Y111.013 E.00614 G1 X100.878 Y112.96 E.09319 ;PATH_TASK id=1099 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X106.892 Y110.304 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;WIDTH:0.453936 G1 F10948.479 G1 X106.844 Y110.078 E.00789 G1 X106.676 Y109.832 E.01016 G1 X106.474 Y109.735 E.00767 G1 X105.992 Y109.723 E.01649 G1 X106.886 Y110.618 E.04323 G1 X106.891 Y110.344 E.00937 ;PATH_TASK id=1100 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X109.719 Y113.087 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F11054.348 G2 X111.665 Y113.245 I1.17 J-2.352 E.0677 G1 X112.42 Y114 E.03617 G1 X116.565 Y114 E.1403 G1 X115.418 Y112.853 E.05494 G1 X115.319 Y112.991 E.00574 G3 X113.637 Y113.333 I-1.086 J-1.032 E.06189 ;PATH_TASK id=1101 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X113.507 Y112.746 F21000 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.461454 G1 F10751.814 G1 X113.659 Y112.89 E.00729 ;PATH_TASK id=1102 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X116.625 Y110.493 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;WIDTH:0.400315 G1 F12000 G1 X116.561 Y110.192 E.00915 G1 X116.404 Y109.979 E.00785 G1 X116.191 Y109.871 E.0071 G1 X115.69 Y109.818 E.01496 G1 X115.621 Y109.784 E.00229 G1 X116.071 Y110.153 E.0173 G1 X116.621 Y110.703 E.02312 G1 X116.624 Y110.533 E.00506 ;PATH_TASK id=1103 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X117.926 Y109.361 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F11054.348 G1 X117.912 Y109.249 E.00381 G3 X118.304 Y107.449 I2.635 J-.369 E.06369 G1 X116.855 Y106 E.06939 G1 X118.855 Y106 E.0677 ;PATH_TASK id=1104 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X122.159 Y107.241 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.512654 G1 F9579.89 G1 X122.562 Y107.675 E.02314 ;PATH_TASK id=1105 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X115.412 Y108.31 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F11054.364 G1 X115.428 Y107.36 E.03217 G1 X115.365 Y107.032 E.0113 G1 X115.151 Y106.779 E.01122 G1 X114.699 Y106.646 E.01596 G1 X114.123 Y106.637 E.0195 G1 X113.816 Y106.714 E.01073 G1 X115.383 Y108.282 E.07505 ;PATH_TASK id=1106 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X113.526 Y106.712 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 G1 F11054.364 G1 X115.407 Y108.593 E.09004 G1 X115.397 Y109.159 E.01916 G1 X113.466 Y107.228 E.09243 G1 X113.459 Y107.274 E.00155 G1 X113.453 Y107.651 E.01277 G1 X113.345 Y107.683 E.00381 G1 X116.595 Y110.933 E.15558 G1 X116.592 Y111.146 E.00723 G1 X116.59 Y111.182 E.00119 G1 X116.559 Y111.335 E.0053 G1 X116.518 Y111.432 E.00354 G1 X111.756 Y106.669 E.22798 G1 X111.494 Y106.574 E.00941 G1 X111.316 Y106.534 E.00617 G1 X111.016 Y106.505 E.01022 G1 X116.225 Y111.714 E.24937 G1 X115.931 Y111.862 E.01114 G1 X115.849 Y111.914 E.00328 G1 X110.483 Y106.548 E.25688 G1 X110.333 Y106.568 E.00511 G1 X110.154 Y106.625 E.00638 G1 X110.039 Y106.679 E.0043 G1 X115.511 Y112.152 E.26195 G1 X115.261 Y112.379 E.01143 G2 X115.217 Y112.433 I.231 J.232 E.00238 G1 X109.668 Y106.884 E.26562 G1 X109.613 Y106.922 E.00224 G1 X109.366 Y107.158 E.01158 G1 X114.971 Y112.763 E.26829 G1 X114.768 Y112.942 E.00914 G1 X114.625 Y112.992 E.00516 G1 X109.119 Y107.486 E.26358 G1 X108.921 Y107.834 E.01353 G1 X108.911 Y107.854 E.00077 G1 X112.796 Y111.739 E.18596 G1 X112.656 Y112.004 E.01013 G1 X112.596 Y112.099 E.00381 G1 X112.588 Y112.108 E.00039 G1 X108.768 Y108.287 E.18289 G1 X108.713 Y108.474 E.00661 G1 X108.69 Y108.579 E.00364 G1 X108.665 Y108.759 E.00616 G1 X112.309 Y112.404 E.17446 G1 X112.229 Y112.487 E.00391 G1 X112.143 Y112.563 E.00388 G1 X112.054 Y112.619 E.00355 G1 X111.985 Y112.655 E.00266 G1 X108.605 Y109.276 E.16177 G1 X108.584 Y109.739 E.0157 G1 X108.585 Y109.831 E.00312 G1 X111.593 Y112.839 E.144 G1 X111.495 Y112.872 E.0035 G1 X111.114 Y112.936 E.01306 G1 X108.607 Y110.429 E.12002 G1 X108.67 Y110.911 E.01645 G1 X108.696 Y111.027 E.00402 G1 X108.725 Y111.122 E.00336 G1 X110.725 Y113.122 E.09575 ;PATH_TASK id=1107 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X103.415 Y106.603 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;WIDTH:0.408622 G1 F12000 G1 X103.484 Y106.674 E.00301 ;PATH_TASK id=1108 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X105.262 Y107.787 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;WIDTH:0.530739 G1 F9224.733 G1 X105.271 Y107.229 E.02265 G1 X105.217 Y107.042 E.00792 G1 X104.977 Y106.93 E.01072 G1 X104.404 Y106.93 E.02325 G1 X105.233 Y107.759 E.04759 ;PATH_TASK id=1109 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X105.691 Y108.85 F21000 ;WIDTH:0.446279 G1 F11156.332 G1 X105.719 Y107.237 E.0541 G1 X105.661 Y106.878 E.01218 G1 X105.449 Y106.618 E.01126 G1 X105.051 Y106.483 E.01408 G1 X104.298 Y106.482 E.02527 G1 X103.972 Y106.642 E.01219 G1 X103.763 Y106.754 E.00792 G1 X103.512 Y106.702 E.0086 G1 X103.904 Y107.063 E.01785 G1 X105.663 Y108.821 E.08342 ;PATH_TASK id=1110 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X130.704 Y106.689 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F11054.364 G1 X132.432 Y108.416 E.0827 G1 X132.509 Y108.642 E.00808 G1 X132.538 Y108.757 E.004 G1 X132.601 Y109.162 E.01387 G1 X130.267 Y106.827 E.11174 G1 X130.246 Y106.826 E.00071 G1 X130.154 Y106.832 E.00311 G1 X129.751 Y106.887 E.01377 G1 X132.642 Y109.778 E.13838 G1 X132.644 Y109.832 E.00183 G1 X132.644 Y109.887 E.00184 G1 X132.625 Y110.337 E.01525 G1 X129.324 Y107.035 E.15804 G1 X129.104 Y107.138 E.0082 G1 X128.953 Y107.24 E.00618 G1 X132.567 Y110.854 E.17299 G1 X132.534 Y111.085 E.00789 G1 X132.511 Y111.19 E.00364 G1 X132.468 Y111.331 E.00501 G1 X128.65 Y107.514 E.18276 G1 X128.601 Y107.56 E.00229 G1 X128.469 Y107.726 E.00718 G1 X128.403 Y107.842 E.00451 G1 X132.332 Y111.771 E.1881 G1 X132.285 Y111.882 E.00408 G1 X132.134 Y112.148 E.01037 G1 X128.202 Y108.216 E.18822 G1 X128.167 Y108.299 E.00303 G1 X128.07 Y108.66 E.01266 G1 X131.904 Y112.494 E.18356 G1 X131.612 Y112.778 E.01378 G1 X128.014 Y109.18 E.17223 G1 X128.01 Y109.432 E.00852 G1 X128.012 Y109.49 E.00199 G1 X128.018 Y109.546 E.00188 G1 X128.029 Y109.601 E.00191 G1 X128.084 Y109.826 E.00784 G1 X131.265 Y113.006 E.15225 G1 X131.046 Y113.118 E.00831 G1 X130.864 Y113.181 E.00654 G1 X128.351 Y110.668 E.12028 G1 X128.327 Y110.8 E.00453 G1 X128.173 Y110.921 E.00663 G1 X128.117 Y111.01 E.00355 G1 X130.38 Y113.273 E.10834 G1 X130.257 Y113.284 E.00417 G1 X130.208 Y113.282 E.00168 G1 X129.78 Y113.248 E.01453 G1 X127.863 Y111.332 E.09172 ;PATH_TASK id=1111 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X131.145 Y114 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F11054.348 G1 X133.145 Y114 E.0677 G1 X132.058 Y112.913 E.05205 G2 X133.049 Y109.759 I-3.406 J-2.802 E.11471 G1 X137.29 Y114 E.20305 G1 X138.527 Y114 E.04187 G1 X138.736 Y113.758 E.01083 G3 X138.329 Y113.589 I.074 J-.754 E.01512 ;PATH_TASK id=1112 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X131.526 Y107.213 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.463536 G1 F10698.594 G1 X131.977 Y107.643 E.02179 ;PATH_TASK id=1113 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X149.508 Y106.061 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F11054.364 G1 X150.676 Y107.228 E.0559 G1 X150.855 Y107.262 E.00615 G1 X151.079 Y106.983 E.01212 G1 X151.206 Y106.939 E.00454 G1 X151.368 Y107.019 E.00612 G1 X151.406 Y107.268 E.00854 G1 X151.348 Y107.378 E.00421 G1 X151.085 Y107.637 E.0125 G1 X152.439 Y108.992 E.06484 G1 X152.439 Y106.061 E.09921 G1 X149.548 Y106.061 E.09786 ;PATH_TASK id=1114 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X150.757 Y106.578 F21000 ;WIDTH:0.650748 G1 F7403.41 G1 X150.859 Y106.56 E.00525 ;PATH_TASK id=1115 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.611624 G1 F7912.728 G1 X150.962 Y106.542 E.00491 ;PATH_TASK id=1116 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.5725 G1 F8497.3 G1 X151.064 Y106.524 E.00457 ;PATH_TASK id=1117 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.552938 G1 F8823.218 G1 X151.166 Y106.506 E.0044 ;PATH_TASK id=1118 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X151.206 Y106.5 F21000 ;WIDTH:0.494421 G1 F9966.761 G1 X151.446 Y106.638 E.01041 ;PATH_TASK id=1119 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.455635 G1 F10903.428 G1 X151.686 Y106.777 E.00952 ;PATH_TASK id=1120 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.415815 G1 F12000 G1 X151.727 Y107.005 E.00719 ;PATH_TASK id=1121 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.37823 G1 X151.768 Y107.233 E.00647 G1 X151.715 Y107.53 E.0084 ;PATH_TASK id=1122 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.395475 G1 X151.631 Y107.638 E.00401 G1 X152.054 Y108.061 E.01754 G1 X152.077 Y107.358 E.02061 ;PATH_TASK id=1123 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.379046 G1 X152.058 Y107.008 E.00981 ;PATH_TASK id=1124 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.424023 G1 F11807.838 G1 X152.039 Y106.657 E.01112 G1 X152.039 Y106.461 E.00623 ;PATH_TASK id=1125 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.455635 G1 F10903.428 G1 X151.642 Y106.479 E.01363 ;PATH_TASK id=1126 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 ;WIDTH:0.475028 G1 F10414.075 G1 X151.245 Y106.498 E.01427 ;PATH_TASK id=1127 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.6 F720 G1 X152.684 Y109.922 Z1.6 F21000 G1 Z1 F720 G1 E.7 F1500 ;WIDTH:0.460063 G1 F10787.668 G1 X150.696 Y107.934 E.0975 G1 X150.124 Y107.924 E.01984 G1 X150.034 Y107.649 E.01005 G1 X150.248 Y107.486 E.00933 G1 X149.284 Y106.522 E.0473 G1 X149.273 Y106.562 E.00144 G1 X149.19 Y107.018 E.01608 G1 X152.5 Y110.328 E.16238 G1 X152.5 Y110.918 E.02046 G1 X149.093 Y107.511 E.16715 G1 X148.979 Y107.905 E.01423 G1 X148.896 Y107.903 E.00289 G1 X152.5 Y111.508 E.17683 G1 X152.5 Y112.098 E.02046 G1 X148.295 Y107.893 E.20627 G1 X148.179 Y107.891 E.00403 G1 X148.175 Y107.893 E.00018 G1 X148.167 Y107.903 E.00043 G1 X148.159 Y107.936 E.00118 G1 X148.153 Y108.34 E.01402 G1 X148.34 Y108.528 E.00921 G1 X148.783 Y108.614 E.01564 G1 X148.956 Y109.144 E.01933 G1 X152.5 Y112.688 E.17386 G1 X152.5 Y113.278 E.02046 G1 X149.091 Y109.869 E.16723 G1 X148.807 Y110.175 E.01448 G1 X152.5 Y113.868 E.18116 G1 X152.5 Y114 E.0046 G1 X152.043 Y114 E.01586 G1 X148.535 Y110.492 E.17209 G1 X148.395 Y110.664 E.00769 G1 X148.377 Y110.69 E.00109 G1 X148.301 Y110.848 E.00609 G1 X151.453 Y114 E.15463 G1 X150.863 Y114 E.02046 G1 X148.146 Y111.283 E.1333 G1 X148.107 Y111.55 E.00938 G1 X148.109 Y111.585 E.00119 G1 X148.153 Y111.88 E.01037 G1 X149.659 Y113.386 E.07386 ;PATH_TASK id=1128 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000 G1 X149.901 Y113.628 F21000 G1 F10787.668 G1 X150.456 Y114.184 E.02726 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 M106 S252 ;LAYER_CHANGE ;Z:1.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;1.2 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;1.2 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1129 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 M486 S0 G1 Z1.8 F720 G1 X152.846 Y114.346 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F9094 G1 X97.154 Y114.346 E1.88514 G1 X97.154 Y105.654 E.29424 G1 X152.846 Y105.654 E1.88514 G1 X152.846 Y114.306 E.29289 ;PATH_TASK id=1130 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 M204 T3000 G1 X152.889 Y114.306 F21000 G1 X152.889 Y114.389 G1 X153.275 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F9094 G1 X96.725 Y114.775 E1.91415 G1 X96.725 Y105.225 E.32326 G1 X153.275 Y105.225 E1.91415 G1 X153.275 Y114.735 E.3219 ;PATH_TASK id=1131 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X152.889 Y114.389 Z1.8 F21000 G1 X151.516 Y114.389 G1 X151.516 Y113.888 G1 Z1.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.5536 G1 F8811.78 G1 X152.388 Y113.888 E.03702 G1 X152.388 Y113.016 E.03702 G1 X151.544 Y113.859 E.05065 ;PATH_TASK id=1132 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 X150.859 Y114.184 F21000 ;WIDTH:0.449999 G1 F9094 G1 X152.5 Y112.542 E.0786 G1 X152.5 Y111.966 E.01949 G1 X150.466 Y114 E.09739 G1 X149.89 Y114 E.01949 G1 X152.5 Y111.39 E.12494 G1 X152.5 Y110.815 E.01949 G1 X149.315 Y114 E.1525 G1 X148.739 Y114 E.01949 G1 X152.5 Y110.239 E.18006 G1 X152.5 Y109.663 E.01949 G1 X148.163 Y114 E.20762 G1 X147.588 Y114 E.01949 G1 X152.5 Y109.088 E.23518 G1 X152.5 Y108.512 E.01949 G1 X147.012 Y114 E.26274 G1 X146.436 Y114 E.01949 G1 X152.5 Y107.936 E.29029 G1 X152.5 Y107.36 E.01949 G1 X145.86 Y114 E.31785 G1 X145.285 Y114 E.01949 G1 X152.5 Y106.785 E.34541 G1 X152.5 Y106.209 E.01949 G1 X144.709 Y114 E.37297 G1 X144.133 Y114 E.01949 G1 X152.134 Y106 E.383 G1 X151.559 Y106 E.01949 G1 X143.558 Y114 E.383 G1 X142.982 Y114 E.01949 G1 X150.983 Y106 E.383 G1 X150.407 Y106 E.01949 G1 X142.406 Y114 E.383 G1 X141.831 Y114 E.01949 G1 X149.832 Y106 E.383 G1 X149.256 Y106 E.01949 G1 X141.255 Y114 E.383 G1 X140.679 Y114 E.01949 G1 X148.68 Y106 E.383 G1 X148.104 Y106 E.01949 G1 X140.193 Y113.911 E.3787 G1 X140.193 Y113.335 E.01949 G1 X147.529 Y106 E.35114 G1 X146.953 Y106 E.01949 G1 X140.193 Y112.759 E.32358 G1 X140.193 Y112.534 E.00763 G1 X139.929 Y112.448 E.0094 G1 X146.377 Y106 E.30866 G1 X145.802 Y106 E.01949 G1 X139.273 Y112.529 E.31254 G1 X139.118 Y112.533 E.00522 G1 X139.126 Y112.1 E.01466 G1 X145.226 Y106 E.29201 G1 X144.65 Y106 E.01949 G1 X139.136 Y111.514 E.26397 G1 X139.146 Y110.928 E.01983 G1 X144.075 Y106 E.23594 G1 X143.499 Y106 E.01949 G1 X139.156 Y110.343 E.2079 G1 X139.166 Y109.757 E.01983 G1 X142.923 Y106 E.17987 G1 X142.347 Y106 E.01949 G1 X138.948 Y109.399 E.16275 G1 X138.509 Y109.392 E.01486 G1 X138.497 Y109.38 E.00059 G1 X138.499 Y109.273 E.00361 G1 X141.772 Y106 E.15669 G1 X141.196 Y106 E.01949 G1 X140.01 Y107.185 E.05677 ;PATH_TASK id=1133 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 X139.534 Y107.661 F21000 G1 F9094 G1 X139.009 Y108.186 E.02513 ;PATH_TASK id=1134 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 X138.136 Y108.825 F21000 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F9094 G1 X138.353 Y108.615 E.01024 G1 X138.778 Y108.622 E.01437 G1 X138.79 Y107.934 E.0233 G3 X139.029 Y107.449 I.362 J-.123 E.02034 G1 X137.987 Y106.407 E.04988 G1 X133.842 Y106.407 E.1403 G1 X138.732 Y111.297 E.23411 G1 X138.707 Y112.792 E.05061 G1 X138.953 Y113.047 E.012 M73 P87 R5 G1 X139.556 Y113.058 E.02041 G2 X139.786 Y112.905 I-.032 J-.298 E.0097 G1 X139.786 Y113.593 E.02329 G1 X136.883 Y113.593 E.09826 G1 X132.194 Y108.904 E.22448 G1 X131.987 Y108.261 E.02286 G1 X131.627 Y107.753 E.02109 G1 X131.098 Y107.377 E.02195 G1 X130.499 Y107.209 E.02105 G1 X129.29 Y106 E.05791 G1 X131.29 Y106 E.0677 ;PATH_TASK id=1135 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X133.638 Y106.03 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.388958 G1 F9094 G1 X139.99 Y106.03 E.18275 ;PATH_TASK id=1136 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.409506 G1 X140.046 Y106.047 E.00178 ;PATH_TASK id=1137 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.450601 G1 X140.102 Y106.064 E.00198 ;PATH_TASK id=1138 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.471149 G1 X140.158 Y106.08 E.00208 ;PATH_TASK id=1139 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X132.492 Y113.97 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 ;WIDTH:0.388958 G1 F9094 G1 X139.921 Y113.97 E.21375 ;PATH_TASK id=1140 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 X139.473 Y112.688 F21000 ;WIDTH:0.38292 G1 F9094 G1 X139.149 Y112.689 E.00916 ;PATH_TASK id=1141 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X139.007 Y110.16 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 G1 F9094 G1 X138.943 Y110.197 E.00208 G1 X139.007 Y110.234 E.00208 G1 X139.008 Y110.232 E.00007 ;PATH_TASK id=1142 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X129.67 Y112.862 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F9094 G1 X130.185 Y112.918 E.01752 G1 X130.704 Y112.85 E.01774 G1 X131.142 Y112.67 E.01603 G1 X131.521 Y112.376 E.01623 G1 X132.738 Y113.593 E.05826 G1 X132.158 Y113.593 E.01964 G1 X132.109 Y114 E.01388 G1 X129 Y114 E.10522 G1 X121 Y106 E.383 G1 X125.145 Y106 E.1403 G1 X128.367 Y109.222 E.15428 G1 X128.503 Y109.996 E.02657 G1 X128.687 Y110.347 E.01343 G1 X128.927 Y110.636 E.0127 G1 X129.528 Y111.03 E.02434 G1 X129.893 Y111.123 E.01274 G1 X130.281 Y111.136 E.01313 G1 X130.683 Y111.538 E.01924 G1 X130.405 Y111.756 E.01195 G1 X130.085 Y111.786 E.01087 G1 X129.8 Y111.631 E.01099 G1 X129.672 Y111.358 E.01021 G2 X129.181 Y111.002 I-.427 J.071 E.02276 ;PATH_TASK id=1143 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 X129.264 Y109.629 F21000 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.448912 G1 F9094 G1 X129.207 Y109.127 E.01707 G1 X129.306 Y108.615 E.01761 G1 X129.546 Y108.247 E.01485 ;PATH_TASK id=1144 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.411584 G1 X129.872 Y108.015 E.01223 G1 X130.38 Y107.947 E.01573 G1 X130.803 Y108.091 E.01369 G1 X131.109 Y108.368 E.01267 ;PATH_TASK id=1145 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.453239 G1 X131.312 Y108.789 E.01593 G1 X131.376 Y109.282 E.01698 G1 X131.258 Y109.75 E.01647 G1 X131.006 Y110.094 E.01454 ;PATH_TASK id=1146 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.429886 G1 X130.817 Y110.195 E.00691 ;PATH_TASK id=1147 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.400852 G1 X130.627 Y110.296 E.00639 G1 X130.221 Y110.367 E.01226 ;PATH_TASK id=1148 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.434134 G1 X129.803 Y110.272 E.01397 G1 X129.47 Y110.009 E.0138 G1 X129.283 Y109.665 E.01275 ;PATH_TASK id=1149 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X131.464 Y110.179 Z1.8 F21000 M73 P87 R4 G1 Z1.2 F720 G1 E.7 F1500 ;WIDTH:0.461998 G1 F9094 G1 X131.412 Y110.179 E.00183 G1 X131.386 Y110.224 E.00183 G1 X131.412 Y110.269 E.00183 G1 X131.464 Y110.269 E.00183 G1 X131.471 Y110.259 E.00043 ;PATH_TASK id=1150 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 X131.862 Y109.723 F21000 ;WIDTH:0.459081 G1 F9094 G1 X131.771 Y108.924 E.02781 G1 X131.619 Y108.453 E.01715 G1 X131.358 Y108.062 E.01624 ;PATH_TASK id=1151 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.422174 G1 X131.002 Y107.779 E.01436 G1 X130.671 Y107.642 E.0113 G1 X130.225 Y107.585 E.01417 G1 X129.729 Y107.68 E.01593 G1 X129.463 Y107.817 E.00943 G1 X129.155 Y108.095 E.01308 G1 X128.915 Y108.522 E.01546 ;PATH_TASK id=1152 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.459458 G1 X128.813 Y108.899 E.01352 G1 X128.793 Y109.356 E.01583 G1 X128.881 Y109.81 E.01603 G1 X129.073 Y110.165 E.01397 G1 X129.379 Y110.477 E.01514 G1 X129.727 Y110.668 E.01373 ;PATH_TASK id=1153 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.431487 G1 X130.204 Y110.735 E.01556 G1 X130.536 Y110.692 E.01082 G1 X131.07 Y110.487 E.0185 G1 X131.349 Y110.677 E.01092 G1 X131.389 Y110.848 E.00567 G1 X131.242 Y111.355 E.01704 G1 X131.055 Y111.685 E.01226 G1 X130.848 Y111.922 E.01016 G1 X130.53 Y112.114 E.01201 ;PATH_TASK id=1154 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.413664 G1 X130.135 Y112.171 E.01231 G1 X129.739 Y112.072 E.01256 G1 X129.433 Y111.809 E.01243 ;PATH_TASK id=1155 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.447899 G1 X129.248 Y111.409 E.01485 G1 X128.859 Y111.437 E.01315 G1 X128.966 Y111.803 E.01283 G1 X129.168 Y112.12 E.01266 G1 X129.465 Y112.353 E.01271 G1 X129.822 Y112.49 E.01286 ;PATH_TASK id=1156 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.429243 G1 X130.284 Y112.526 E.0149 G1 X130.753 Y112.42 E.01545 G1 X131.139 Y112.176 E.01467 G1 X131.395 Y111.894 E.01224 G1 X131.622 Y111.476 E.01526 G1 X131.777 Y110.919 E.01857 G1 X131.842 Y110.395 E.01698 G1 X131.861 Y109.763 E.0203 ;PATH_TASK id=1157 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X122.36 Y109.72 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F9094 G1 X121.935 Y110.192 E.02146 G1 X122.14 Y110.448 E.01111 G1 X122.27 Y110.749 E.01109 G1 X122.301 Y111.446 E.0236 G1 X124.855 Y114 E.12229 G1 X120.71 Y114 E.1403 G1 X115.043 Y108.333 E.27131 G1 X115.061 Y107.272 E.03592 G1 X114.814 Y107.017 E.012 G1 X114.083 Y107.004 E.02475 G1 X113.896 Y107.186 E.00883 G1 X112.71 Y106 E.05678 G1 X116.855 Y106 E.1403 G1 X118.856 Y108.001 E.09583 G1 X119.143 Y107.608 E.01648 G1 X119.546 Y107.29 E.01738 G1 X119.999 Y107.104 E.01657 G1 X120.498 Y107.032 E.01707 ;PATH_TASK id=1158 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 X121.05 Y108.293 F21000 G1 F9094 G1 X120.758 Y108.169 E.01075 G1 X120.435 Y108.168 E.01092 G1 X120.172 Y108.28 E.00969 G1 X119.981 Y108.495 E.00972 G1 X119.903 Y108.76 E.00938 G1 X119.928 Y109.073 E.0106 G1 X120.383 Y109.528 E.02181 G1 X120.882 Y109.521 E.01688 G1 X121.084 Y109.402 E.00794 G1 X121.235 Y109.215 E.00812 G1 X121.308 Y108.979 E.00836 G1 X121.299 Y108.705 E.00928 G1 X121.204 Y108.46 E.0089 G1 X121.05 Y108.293 E.00769 ;PATH_TASK id=1159 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X121.418 Y110.833 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.454022 G1 F9094 G1 X121.468 Y111.026 E.00684 G1 X121.467 Y111.346 E.01093 G1 X121.305 Y111.685 E.01284 ;PATH_TASK id=1160 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.413264 G1 X120.984 Y111.927 E.01236 G1 X120.674 Y112.006 E.00985 G1 X120.241 Y111.955 E.01343 G1 X119.879 Y111.719 E.01332 ;PATH_TASK id=1161 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.447225 G1 X119.678 Y111.336 E.01455 G1 X119.691 Y110.915 E.01416 G1 X119.882 Y110.591 E.01262 ;PATH_TASK id=1162 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.435259 G1 X119.963 Y110.504 E.00389 ;PATH_TASK id=1163 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.472259 G1 X120.044 Y110.416 E.00426 ;PATH_TASK id=1164 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.50926 G1 X120.126 Y110.329 E.00463 ;PATH_TASK id=1165 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.507335 G1 X120.295 Y110.321 E.00654 ;PATH_TASK id=1166 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.466485 G1 X120.464 Y110.314 E.00596 ;PATH_TASK id=1167 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.425635 G1 X120.633 Y110.306 E.00539 ;PATH_TASK id=1168 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.429178 G1 X120.779 Y110.327 E.00475 ;PATH_TASK id=1169 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.477114 G1 X120.926 Y110.348 E.00534 ;PATH_TASK id=1170 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.52505 G1 X121.072 Y110.369 E.00593 ;PATH_TASK id=1171 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.530935 G1 X121.179 Y110.513 E.00728 ;PATH_TASK id=1172 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.494767 G1 X121.287 Y110.657 E.00674 ;PATH_TASK id=1173 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.476683 G1 X121.394 Y110.801 E.00647 ;PATH_TASK id=1174 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X121.642 Y109.3 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 ;WIDTH:0.434007 G1 F9094 G1 X121.387 Y109.646 E.01398 ;PATH_TASK id=1175 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.435793 G1 X121.22 Y109.781 E.00703 ;PATH_TASK id=1176 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.464965 G1 X121.052 Y109.916 E.00755 G1 X120.507 Y109.93 E.01912 ;PATH_TASK id=1177 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.436512 G1 X120.374 Y109.92 E.00437 ;PATH_TASK id=1178 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.480566 G1 X120.241 Y109.911 E.00485 ;PATH_TASK id=1179 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.52462 G1 X120.108 Y109.901 E.00534 ;PATH_TASK id=1180 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.52942 G1 X119.948 Y109.727 E.00957 ;PATH_TASK id=1181 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.494966 G1 X119.788 Y109.553 E.00889 ;PATH_TASK id=1182 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.452382 G1 X119.627 Y109.379 E.00805 G1 X119.542 Y109.17 E.00768 G1 X119.486 Y108.875 E.01025 G1 X119.586 Y108.386 E.01697 G1 X119.84 Y108.045 E.01449 ;PATH_TASK id=1183 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.410994 G1 X120.2 Y107.838 E.0127 G1 X120.612 Y107.774 E.01276 G1 X120.981 Y107.831 E.01142 G1 X121.369 Y108.047 E.0136 ;PATH_TASK id=1184 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.449355 G1 X121.63 Y108.405 E.01495 G1 X121.723 Y108.836 E.0149 G1 X121.649 Y109.26 E.01456 ;PATH_TASK id=1185 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 X122.128 Y109.109 F21000 ;WIDTH:0.45646 G1 F9094 G1 X122.132 Y108.675 E.01493 G1 X121.994 Y108.217 E.01644 G1 X121.771 Y107.895 E.01347 G1 X121.462 Y107.64 E.01378 ;PATH_TASK id=1186 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.418149 G1 X120.965 Y107.458 E.01651 G1 X120.513 Y107.418 E.01415 G1 X119.984 Y107.527 E.01688 G1 X119.549 Y107.781 E.01572 G1 X119.233 Y108.192 E.01617 ;PATH_TASK id=1187 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.458065 G1 X119.116 Y108.492 E.01112 G1 X119.081 Y108.977 E.01679 G1 X119.151 Y109.313 E.01186 G1 X119.329 Y109.643 E.01294 ;PATH_TASK id=1188 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.4579 G1 X119.513 Y109.841 E.00933 ;PATH_TASK id=1189 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.472424 G1 X119.698 Y110.039 E.00966 G1 X119.704 Y110.204 E.00591 G1 X119.371 Y110.633 E.01938 G1 X119.247 Y110.969 E.01281 G1 X119.271 Y111.41 E.01576 G1 X119.387 Y111.711 E.01153 ;PATH_TASK id=1190 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.430248 G1 X119.627 Y112.02 E.01261 G1 X120.024 Y112.26 E.01491 G1 X120.365 Y112.35 E.01138 G1 X120.841 Y112.347 E.01531 G1 X121.296 Y112.192 E.0155 G1 X121.636 Y111.905 E.01433 G1 X121.787 Y111.678 E.00878 G1 X121.896 Y111.273 E.01351 ;PATH_TASK id=1191 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.459596 G1 X121.88 Y110.939 E.01161 G1 X121.773 Y110.645 E.01083 ;PATH_TASK id=1192 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.462934 G1 X121.623 Y110.442 E.00879 ;PATH_TASK id=1193 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.497596 G1 X121.474 Y110.24 E.00952 G1 X121.495 Y110.073 E.00634 ;PATH_TASK id=1194 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.480073 G1 X121.984 Y109.529 E.0266 G1 X122.115 Y109.147 E.01469 ;PATH_TASK id=1195 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X115.837 Y110.69 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 ;WIDTH:0.449819 G1 F9094 G1 X115.795 Y110.663 E.00168 G1 X115.142 Y111.003 E.02491 G1 X115.063 Y111.051 E.00315 G1 X114.859 Y111.05 E.00688 G1 X114.697 Y110.957 E.00633 G1 X114.591 Y110.776 E.00707 G1 X114.648 Y107.435 E.11308 G1 X114.235 Y107.428 E.01397 G1 X114.178 Y110.769 E.11308 G1 X114.151 Y112.226 E.0493 G1 X114.397 Y112.235 E.00832 G1 X114.515 Y112.054 E.00731 G1 X114.9 Y111.644 E.01902 G1 X115.305 Y111.348 E.01698 G1 X115.77 Y111.087 E.01803 G1 X115.831 Y111.024 E.00297 G1 X115.836 Y110.73 E.00997 ;PATH_TASK id=1196 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 X114.609 Y111.325 F21000 ;WIDTH:0.46882 G1 F9094 G1 X114.555 Y111.325 E.00189 G1 X114.529 Y111.371 E.00189 G1 X114.555 Y111.417 E.00189 G1 X114.609 Y111.417 E.00189 G1 X114.615 Y111.405 E.00047 ;PATH_TASK id=1197 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X112.411 Y109.386 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 ;WIDTH:0.446162 G1 F9094 G1 X112.333 Y108.617 E.0259 G1 X112.167 Y108.089 E.01855 G1 X111.922 Y107.7 E.01542 G1 X111.678 Y107.482 E.01098 ;PATH_TASK id=1198 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.422098 G1 X111.308 Y107.31 E.01285 G1 X110.801 Y107.261 E.01606 G1 X110.364 Y107.361 E.01414 G1 X110.099 Y107.518 E.00973 G1 X109.806 Y107.824 E.01334 G1 X109.579 Y108.268 E.01573 ;PATH_TASK id=1199 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.44779 G1 X109.44 Y108.836 E.01967 G1 X109.381 Y109.418 E.01971 G1 X109.372 Y110.065 E.02178 G1 X109.419 Y110.634 E.01922 G1 X109.558 Y111.21 E.01994 G1 X109.795 Y111.666 E.01731 G1 X110.129 Y111.983 E.0155 G1 X110.491 Y112.149 E.01339 ;PATH_TASK id=1200 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.421667 G1 X110.962 Y112.196 E.01492 G1 X111.419 Y112.096 E.01473 G1 X111.687 Y111.939 E.00978 G1 X111.975 Y111.636 E.01317 G1 X112.201 Y111.198 E.01552 ;PATH_TASK id=1201 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.456056 G1 X112.336 Y110.681 E.01834 G1 X112.402 Y110.075 E.02095 G1 X112.411 Y109.426 E.02232 ;PATH_TASK id=1202 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 X111.985 Y110.036 F21000 ;WIDTH:0.44874 G1 F9094 G1 X111.931 Y110.588 E.01874 G1 X111.81 Y111.096 E.01761 G1 X111.563 Y111.537 E.01706 ;PATH_TASK id=1203 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.417524 G1 X111.212 Y111.785 E.01338 G1 X110.826 Y111.84 E.01214 G1 X110.453 Y111.74 E.01201 G1 X110.136 Y111.475 E.01286 G1 X109.942 Y111.111 E.01287 ;PATH_TASK id=1204 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.448376 G1 X109.832 Y110.622 E.01688 G1 X109.791 Y110.078 E.0184 G1 X109.798 Y109.453 E.02109 G1 X109.843 Y108.933 E.01757 G1 X109.968 Y108.367 E.01957 G1 X110.219 Y107.933 E.0169 G1 X110.569 Y107.676 E.01461 ;PATH_TASK id=1205 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.418763 G1 X110.948 Y107.613 E.01201 G1 X111.323 Y107.706 E.01208 G1 X111.659 Y107.989 E.01373 G1 X111.844 Y108.337 E.01233 ;PATH_TASK id=1206 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.451627 G1 X111.952 Y108.831 E.01719 G1 X111.994 Y109.38 E.0187 G1 X111.986 Y109.996 E.02093 ;PATH_TASK id=1207 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 X111.422 Y110.98 F21000 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F9094 G1 X111.58 Y109.851 E.03856 G2 X111.576 Y109.234 I-9.243 J-.257 E.02091 G1 X111.56 Y108.995 E.0081 G1 X110.64 Y108.075 E.04403 G1 X110.443 Y108.286 E.00979 G1 X110.332 Y108.555 E.00985 G1 X110.205 Y109.61 E.03594 G2 X110.202 Y109.963 I10.712 J.266 E.01195 ;PATH_TASK id=1208 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X110.564 Y106 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 G1 F9094 G1 X108.564 Y106 E.0677 G1 X109.801 Y107.236 E.05917 G1 X110.362 Y106.938 E.02152 G1 X111.072 Y106.872 E.02414 G1 X111.708 Y107.034 E.0222 G1 X112.226 Y107.425 E.02195 G1 X112.532 Y107.898 E.01908 G1 X112.737 Y108.542 E.02287 G1 X112.829 Y109.363 E.02795 G1 X112.809 Y110.244 E.02984 G1 X113.761 Y111.196 E.04559 G1 X113.741 Y112.388 E.04034 G1 X113.987 Y112.643 E.012 G1 X114.487 Y112.651 E.0169 G2 X114.828 Y112.314 I-.555 J-.902 E.01637 G1 X116.565 Y114 E.08196 G1 X112.42 Y114 E.1403 G1 X111.006 Y112.586 E.0677 G1 X110.24 Y112.486 E.02615 G1 X109.905 Y112.321 E.01265 G1 X109.627 Y112.096 E.0121 G1 X109.206 Y111.432 E.0266 G1 X108.988 Y110.568 E.03015 G1 X104.419 Y106 E.2187 G1 X100.274 Y106 E.1403 G1 X101.058 Y106.783 E.03749 G1 X99.576 Y106.758 E.05014 G1 X99.322 Y107.004 E.012 G1 X99.31 Y107.711 E.02395 G1 X99.556 Y107.966 E.012 G1 X101.381 Y107.997 E.06177 G1 X101.346 Y108.026 E.00152 G2 X99.685 Y109.555 I4.67 J6.745 E.07666 G1 X97.5 Y107.37 E.1046 G1 X97.5 Y111.515 E.1403 G1 X99.985 Y114 E.11899 G1 X104.13 Y114 E.1403 G1 X102.265 Y112.135 E.08929 G1 X102.576 Y111.881 E.0136 G1 X102.812 Y111.563 E.0134 G1 X102.976 Y111.176 E.01423 G1 X103.077 Y110.69 E.01679 G1 X102.857 Y110.396 E.01243 G1 X102.112 Y110.307 E.0254 G1 X101.832 Y110.529 E.01207 G1 X101.785 Y110.858 E.01126 G1 X101.688 Y111.065 E.00773 G1 X101.396 Y111.266 E.012 G1 X100.583 Y110.453 E.03891 G1 X100.771 Y110.151 E.01205 G1 X101.096 Y109.808 E.01599 G2 X102.68 Y108.405 I-8.135 J-10.784 E.0717 G1 X104.073 Y109.799 E.06671 G1 X104.032 Y112.223 E.08207 G1 X104.279 Y112.478 E.012 G1 X104.778 Y112.486 E.0169 G2 X105.45 Y111.793 I-1.911 J-2.525 E.0328 G1 X105.798 Y111.523 E.01491 G1 X108.275 Y114 E.11861 G1 X106.275 Y114 E.0677 ;PATH_TASK id=1209 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X106.128 Y110.525 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.449819 G1 F9094 G1 X106.087 Y110.497 E.00168 G1 X105.434 Y110.838 E.02491 G1 X105.354 Y110.886 E.00315 G1 X105.151 Y110.884 E.00688 G1 X104.988 Y110.792 E.00633 G1 X104.883 Y110.611 E.00707 G1 X104.939 Y107.269 E.11308 G1 X104.527 Y107.262 E.01397 G1 X104.47 Y110.604 E.11308 G1 X104.442 Y112.061 E.0493 G1 X104.688 Y112.069 E.00832 G1 X104.807 Y111.889 E.00731 G1 X105.191 Y111.479 E.01902 G1 X105.597 Y111.183 E.01698 G1 X106.061 Y110.922 E.01803 G1 X106.122 Y110.859 E.00297 G1 X106.127 Y110.565 E.00997 ;PATH_TASK id=1210 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 X104.9 Y111.159 F21000 ;WIDTH:0.468824 G1 F9094 G1 X104.847 Y111.159 E.00189 G1 X104.82 Y111.206 E.00189 G1 X104.847 Y111.252 E.00189 G1 X104.9 Y111.252 E.00189 G1 X104.906 Y111.24 E.00047 ;PATH_TASK id=1211 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z1.8 F720 G1 X102.823 Y107.227 Z1.8 F21000 G1 Z1.2 F720 G1 E.7 F1500 ;WIDTH:0.447185 G1 F9094 G2 X101.595 Y107.196 I-2.989 J93.737 E.04131 G1 X99.737 Y107.164 E.06247 G1 X99.723 Y107.565 E.01348 G1 X101.588 Y107.597 E.06271 G1 X101.775 Y107.726 E.00764 G1 X101.857 Y107.943 E.00782 G1 X101.855 Y108.083 E.00471 G1 X101.569 Y108.363 E.01343 G1 X100.83 Y108.978 E.03231 G1 X100.447 Y109.324 E.01735 G1 X100.056 Y109.747 E.01938 G1 X99.801 Y110.184 E.017 G1 X99.696 Y110.576 E.01366 G1 X99.71 Y110.989 E.01388 G1 X99.841 Y111.339 E.01257 G1 X100.074 Y111.647 E.01299 G1 X100.395 Y111.871 E.01315 ;PATH_TASK id=1212 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.434724 G1 X100.8 Y112.003 E.01389 G1 X101.254 Y112.032 E.0148 G1 X101.723 Y111.95 E.01553 G1 X102.132 Y111.731 E.0151 G1 X102.427 Y111.388 E.01474 G1 X102.581 Y111.013 E.01322 G1 X102.63 Y110.784 E.00763 G1 X102.213 Y110.753 E.01365 G1 X102.092 Y111.171 E.01417 G1 X101.83 Y111.475 E.01307 ;PATH_TASK id=1213 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.416812 G1 X101.464 Y111.641 E.01252 G1 X100.998 Y111.668 E.01451 G1 X100.567 Y111.534 E.01404 G1 X100.271 Y111.263 E.01245 ;PATH_TASK id=1214 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 ;WIDTH:0.446789 G1 X100.116 Y110.889 E.0136 G1 X100.144 Y110.469 E.01414 G1 X100.365 Y110.018 E.01686 G1 X100.697 Y109.634 E.01704 G1 X101.09 Y109.274 E.01792 G1 X101.827 Y108.665 E.03208 G1 X102.215 Y108.309 E.0177 G1 X102.553 Y107.896 E.01794 G1 X102.768 Y107.485 E.01555 G1 X102.815 Y107.266 E.00754 ;PATH_TASK id=1215 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000 G1 X102.231 Y107.591 F21000 ;WIDTH:0.496502 G1 F9094 G1 X102.174 Y107.591 E.00214 G1 X102.146 Y107.64 E.00214 G1 X102.174 Y107.689 E.00214 G1 X102.231 Y107.689 E.00214 G1 X102.24 Y107.674 E.00063 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:1.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;1.4 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;1.4 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1216 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 M486 S0 G1 Z2 F720 G1 X152.846 Y114.346 Z2 F21000 G1 Z1.4 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F8887 G1 X97.154 Y114.346 E1.88514 G1 X97.154 Y105.654 E.29424 G1 X152.846 Y105.654 E1.88514 G1 X152.846 Y114.306 E.29289 ;PATH_TASK id=1217 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 M204 T3000 G1 X152.889 Y114.306 F21000 G1 X152.889 Y114.389 G1 X153.275 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F8887 G1 X96.725 Y114.775 E1.91415 G1 X96.725 Y105.225 E.32326 G1 X153.275 Y105.225 E1.91415 G1 X153.275 Y114.735 E.3219 ;PATH_TASK id=1218 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z2 F720 G1 X152.889 Y114.389 Z2 F21000 G1 X149.411 Y113.96 G1 X149.411 Y107.919 G1 X149.146 Y107.919 G1 Z1.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill G1 F8887 G1 X147.227 Y106 E.0919 G1 X146.651 Y106 E.01949 G1 X148.963 Y108.312 E.11069 G1 X148.963 Y108.888 E.01949 G1 X146.075 Y106 E.13825 G1 X145.5 Y106 E.01949 G1 X148.963 Y109.463 E.16581 G1 X148.963 Y110.039 E.01949 G1 X144.924 Y106 E.19336 G1 X144.348 Y106 E.01949 G1 X148.963 Y110.615 E.22092 G1 X148.963 Y111.19 E.01949 G1 X143.772 Y106 E.24848 G1 X143.197 Y106 E.01949 G1 X148.963 Y111.766 E.27604 G1 X148.963 Y112.342 E.01949 G1 X142.621 Y106 E.3036 G1 X142.045 Y106 E.01949 G1 X148.963 Y112.917 E.33116 G1 X148.963 Y113.493 E.01949 G1 X141.47 Y106 E.35871 G1 X141.075 Y106 E.01337 G1 X140.984 Y106.09 E.00433 G1 X148.895 Y114 E.37867 G1 X148.319 Y114 E.01949 G1 X140.868 Y106.55 E.35666 G1 X140.868 Y107.125 E.01949 G1 X147.743 Y114 E.3291 G1 X147.168 Y114 E.01949 G1 X140.868 Y107.701 E.30155 G1 X140.868 Y108.236 E.01812 G1 X140.84 Y108.248 E.00105 G1 X146.592 Y114 E.27536 G1 X146.016 Y114 E.01949 G1 X140.43 Y108.414 E.26743 G1 X140.02 Y108.58 E.01497 G1 X145.441 Y114 E.2595 G1 X144.865 Y114 E.01949 G1 X139.854 Y108.989 E.23988 G1 X139.852 Y109.108 E.004 G1 X139.726 Y109.229 E.00591 G1 X139.848 Y109.354 E.00591 G1 X139.844 Y109.555 E.0068 G1 X144.289 Y114 E.21278 G1 X143.714 Y114 E.01949 G1 X139.835 Y110.122 E.18568 G1 X139.825 Y110.688 E.01916 G1 X143.138 Y114 E.15859 G1 X142.562 Y114 E.01949 G1 X140.868 Y112.307 E.08108 G1 X140.868 Y112.882 E.01949 G1 X141.987 Y114 E.05352 G1 X141.411 Y114 E.01949 G1 X140.868 Y113.458 E.02596 G1 X140.868 Y113.488 E.00101 G1 X140.703 Y113.868 E.01404 G1 X141.018 Y114.184 E.0151 ;PATH_TASK id=1219 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X140.642 Y113.131 F21000 M204 P1500 ;TYPE:Internal Bridge ;WIDTH:0.4 ;HEIGHT:0.4 G1 F4500 M106 S255 G1 X139.795 Y113.979 E.06264 G1 X139.158 Y113.979 E.03325 G1 X140.44 Y112.697 E.09469 G1 X140.44 Y112.355 E.01789 G1 X140.218 Y112.283 E.01218 G1 X138.522 Y113.979 E.12534 G1 X137.885 Y113.979 E.03325 G1 X139.738 Y112.126 E.1369 G1 X139.374 Y112.007 E.02003 G1 X139.377 Y111.851 E.00814 G1 X137.249 Y113.979 E.15719 G1 X136.613 Y113.979 E.03325 G1 X139.388 Y111.204 E.20503 G1 X139.399 Y110.557 E.03383 G1 X135.976 Y113.979 E.25286 G1 X135.34 Y113.979 E.03325 G1 X139.41 Y109.909 E.3007 G1 X139.416 Y109.525 E.02009 G1 X139.289 Y109.393 E.00955 G1 X134.703 Y113.979 E.33882 G1 X134.067 Y113.979 E.03325 G1 X140.44 Y107.606 E.47086 G1 X140.44 Y106.97 E.03325 G1 X133.431 Y113.979 E.51788 G1 X132.794 Y113.979 E.03325 G1 X140.44 Y106.333 E.5649 G1 X140.44 Y106.028 E.01594 G1 X140.447 Y106.021 E.00054 G1 X140.116 Y106.021 E.01731 G1 X132.517 Y113.62 E.56143 G1 X132.199 Y113.301 E.02351 G1 X139.479 Y106.021 E.53792 G1 X138.843 Y106.021 E.03325 G1 X131.881 Y112.983 E.51441 G1 X131.865 Y112.968 E.00114 G1 X133.938 Y110.895 E.15313 G1 X133.635 Y110.593 E.02237 G1 X138.207 Y106.021 E.33777 G1 X137.57 Y106.021 E.03325 G1 X133.317 Y110.274 E.31426 G1 X132.999 Y109.956 E.02351 G1 X136.934 Y106.021 E.29075 G1 X136.297 Y106.021 E.03325 G1 X132.681 Y109.638 E.26724 G1 X132.362 Y109.32 E.02351 G1 X135.661 Y106.021 E.24373 G1 X135.025 Y106.021 E.03325 G1 X132.084 Y108.962 E.2173 G1 X131.952 Y108.543 E.02294 G1 X131.921 Y108.489 E.00328 G1 X134.388 Y106.021 E.18232 G1 X133.752 Y106.021 E.03325 G1 X131.541 Y108.232 E.16338 ;PATH_TASK id=1220 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2 F720 G1 X131.29 Y106 Z2 F21000 G1 Z1.4 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 ;HEIGHT:0.2 G1 F8887 M106 S252 G1 X129.29 Y106 E.0677 G1 X131.213 Y107.923 E.09207 G1 X131.143 Y107.993 E.00335 G3 X131.715 Y109.218 I-2.511 J1.918 E.04612 G2 X133.332 Y110.895 I10.614 J-8.614 E.07896 G1 X131.686 Y112.541 E.07878 G1 X125.145 Y106 E.31314 G1 X121 Y106 E.1403 G1 X129 Y114 E.383 G1 X124.855 Y114 E.1403 G1 X116.855 Y106 E.383 G1 X112.71 Y106 E.1403 G1 X120.71 Y114 E.383 G1 X118.71 Y114 E.0677 ;PATH_TASK id=1221 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2 F720 G1 X110.564 Y106 Z2 F21000 G1 Z1.4 F720 G1 E.7 F1500 G1 F8887 G1 X108.564 Y106 E.0677 G1 X116.565 Y114 E.383 G1 X112.42 Y114 E.1403 G1 X104.419 Y106 E.383 G1 X106.419 Y106 E.0677 ;PATH_TASK id=1222 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2 F720 G1 X106.275 Y114 Z2 F21000 G1 Z1.4 F720 G1 E.7 F1500 G1 F8887 G1 X108.275 Y114 E.0677 G1 X100.274 Y106 E.383 G1 X97.5 Y106 E.09393 G1 X97.5 Y107.37 E.04638 G1 X104.13 Y114 E.31741 G1 X99.985 Y114 E.1403 G1 X97.5 Y111.515 E.11899 G1 X97.5 Y113.515 E.0677 ;PATH_TASK id=1223 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2 F720 G1 X140.77 Y112.27 Z2 F21000 G1 Z1.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F8887 G1 X140.707 Y112.307 E.00208 G1 X140.77 Y112.343 E.00208 G1 X140.772 Y112.341 E.00007 ;PATH_TASK id=1224 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X139.893 Y111.605 F21000 ;WIDTH:0.554234 G1 F8800.855 G1 X139.829 Y111.605 E.00272 G1 X139.797 Y111.66 E.00272 G1 X139.829 Y111.716 E.00272 G1 X139.893 Y111.716 E.00272 G1 X139.904 Y111.695 E.00102 ;PATH_TASK id=1225 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2 F720 G1 X147.576 Y106.061 Z2 F21000 G1 Z1.4 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F8887 G1 X148.963 Y107.448 E.06643 G1 X148.963 Y106.061 E.04697 G1 X147.616 Y106.061 E.04562 ;PATH_TASK id=1226 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X148.582 Y106.423 F21000 ;WIDTH:0.448716 G1 F8887 G1 X148.531 Y106.423 E.00171 G1 X148.506 Y106.467 E.00171 G1 X148.531 Y106.511 E.00171 G1 X148.582 Y106.511 E.00171 G1 X148.588 Y106.502 E.00036 ;PATH_TASK id=1227 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2 F720 G1 X152.685 Y106.592 Z2 F21000 G1 Z1.4 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.426852 G1 F6000 G1 X151.908 Y105.815 E.03507 ;PATH_TASK id=1228 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X151.365 Y105.815 F21000 G1 F6000 G1 X152.685 Y107.135 E.05958 ;PATH_TASK id=1229 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X152.685 Y107.678 F21000 G1 F6000 G1 X150.822 Y105.815 E.0841 ;PATH_TASK id=1230 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X150.279 Y105.815 F21000 G1 F6000 G1 X152.685 Y108.221 E.10861 ;PATH_TASK id=1231 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X152.685 Y108.764 F21000 G1 F6000 G1 X149.736 Y105.815 E.13312 ;PATH_TASK id=1232 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X149.194 Y105.815 F21000 G1 F6000 G1 X152.685 Y109.306 E.15764 ;PATH_TASK id=1233 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X152.685 Y109.849 F21000 G1 F6000 G1 X149.186 Y106.35 E.15799 ;PATH_TASK id=1234 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X149.186 Y106.893 F21000 G1 F6000 G1 X152.685 Y110.392 E.15799 ;PATH_TASK id=1235 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X152.685 Y110.935 F21000 G1 F6000 G1 X149.186 Y107.436 E.15799 ;PATH_TASK id=1236 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X149.186 Y107.979 F21000 G1 F6000 G1 X152.685 Y111.478 E.15799 ;PATH_TASK id=1237 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X152.685 Y112.021 F21000 G1 F6000 G1 X149.186 Y108.522 E.15799 ;PATH_TASK id=1238 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X149.186 Y109.065 F21000 G1 F6000 G1 X152.685 Y112.564 E.15799 ;PATH_TASK id=1239 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X152.685 Y113.107 F21000 G1 F6000 G1 X149.186 Y109.608 E.15799 ;PATH_TASK id=1240 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X149.186 Y110.151 F21000 G1 F6000 G1 X152.685 Y113.65 E.15799 ;PATH_TASK id=1241 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X152.677 Y114.185 F21000 G1 F6000 G1 X149.186 Y110.694 E.15763 ;PATH_TASK id=1242 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X149.186 Y111.237 F21000 G1 F6000 G1 X152.134 Y114.185 E.13312 ;PATH_TASK id=1243 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X151.591 Y114.185 F21000 G1 F6000 G1 X149.186 Y111.78 E.10861 ;PATH_TASK id=1244 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X149.186 Y112.323 F21000 G1 F6000 G1 X151.048 Y114.185 E.08409 ;PATH_TASK id=1245 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X150.505 Y114.185 F21000 G1 F6000 G1 X149.186 Y112.865 E.05958 ;PATH_TASK id=1246 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000 G1 X149.186 Y113.408 F21000 G1 F6000 G1 X149.962 Y114.185 E.03507 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:1.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;1.6 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;1.6 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1247 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 M486 S0 G1 Z2.2 F720 G1 X149.983 Y105.654 Z2.2 F21000 G1 Z1.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F7190 G1 X149.983 Y114.346 E.29424 G1 X97.154 Y114.346 E1.78821 G1 X97.154 Y105.654 E.29424 G1 X149.943 Y105.654 E1.78685 ;PATH_TASK id=1248 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 M204 T3000 G1 X149.943 Y105.611 F21000 G1 X150.026 Y105.611 G1 X150.411 Y105.225 M204 P3000 ;TYPE:Outer wall G1 F7190 G1 X150.411 Y114.775 E.32326 G1 X96.725 Y114.775 E1.81722 G1 X96.725 Y105.225 E.32326 G1 X150.371 Y105.225 E1.81586 M73 P88 R4 ;PATH_TASK id=1249 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z2.2 F720 G1 X150.026 Y105.611 Z2.2 F21000 G1 X150.026 Y114.389 G1 X149.048 Y114.389 G1 X149.048 Y114.185 G1 Z1.6 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.425261 G1 F6000 G1 X149.822 Y113.412 E.03477 ;PATH_TASK id=1250 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X149.822 Y112.871 F21000 G1 F6000 G1 X148.507 Y114.185 E.05908 ;PATH_TASK id=1251 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X147.967 Y114.185 F21000 G1 F6000 G1 X149.822 Y112.33 E.08339 ;PATH_TASK id=1252 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X149.822 Y111.79 F21000 G1 F6000 G1 X147.426 Y114.185 E.10771 ;PATH_TASK id=1253 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X146.885 Y114.185 F21000 G1 F6000 G1 X149.822 Y111.249 E.13202 ;PATH_TASK id=1254 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X149.822 Y110.708 F21000 G1 F6000 G1 X146.345 Y114.185 E.15633 ;PATH_TASK id=1255 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X145.804 Y114.185 F21000 G1 F6000 G1 X149.822 Y110.167 E.18064 ;PATH_TASK id=1256 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X149.822 Y109.627 F21000 G1 F6000 G1 X145.263 Y114.185 E.20495 ;PATH_TASK id=1257 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X144.722 Y114.185 F21000 G1 F6000 G1 X149.822 Y109.086 E.22926 ;PATH_TASK id=1258 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X149.822 Y108.545 F21000 G1 F6000 G1 X144.182 Y114.185 E.25357 ;PATH_TASK id=1259 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X143.641 Y114.185 F21000 G1 F6000 G1 X149.822 Y108.005 E.27788 ;PATH_TASK id=1260 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X149.822 Y107.464 F21000 G1 F6000 G1 X143.1 Y114.185 E.30219 ;PATH_TASK id=1261 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X142.56 Y114.185 F21000 G1 F6000 G1 X149.822 Y106.923 E.3265 ;PATH_TASK id=1262 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X149.822 Y106.382 F21000 G1 F6000 G1 X142.019 Y114.185 E.35081 ;PATH_TASK id=1263 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X141.505 Y114.158 F21000 G1 F6000 G1 X149.822 Y105.842 E.37391 ;PATH_TASK id=1264 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X149.308 Y105.815 F21000 G1 F6000 G1 X141.505 Y113.617 E.35081 ;PATH_TASK id=1265 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X141.505 Y113.077 F21000 G1 F6000 G1 X148.767 Y105.815 E.3265 ;PATH_TASK id=1266 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X148.226 Y105.815 F21000 G1 F6000 G1 X141.505 Y112.536 E.30219 ;PATH_TASK id=1267 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X141.505 Y111.995 F21000 G1 F6000 G1 X147.686 Y105.815 E.27787 ;PATH_TASK id=1268 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X147.145 Y105.815 F21000 G1 F6000 G1 X141.505 Y111.455 E.25356 ;PATH_TASK id=1269 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X141.505 Y110.914 F21000 G1 F6000 G1 X146.604 Y105.815 E.22925 ;PATH_TASK id=1270 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X146.063 Y105.815 F21000 G1 F6000 G1 X141.505 Y110.373 E.20494 ;PATH_TASK id=1271 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X141.505 Y109.832 F21000 G1 F6000 G1 X145.523 Y105.815 E.18063 ;PATH_TASK id=1272 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X144.982 Y105.815 F21000 G1 F6000 G1 X141.505 Y109.292 E.15632 ;PATH_TASK id=1273 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X141.505 Y108.751 F21000 G1 F6000 G1 X144.441 Y105.815 E.13201 ;PATH_TASK id=1274 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X143.901 Y105.815 F21000 G1 F6000 G1 X141.505 Y108.21 E.1077 ;PATH_TASK id=1275 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X141.505 Y107.67 F21000 G1 F6000 G1 X143.36 Y105.815 E.08339 ;PATH_TASK id=1276 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X142.819 Y105.815 F21000 G1 F6000 G1 X141.505 Y107.129 E.05908 ;PATH_TASK id=1277 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X141.505 Y106.588 F21000 G1 F6000 G1 X142.278 Y105.815 E.03477 ;PATH_TASK id=1278 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.2 F720 G1 X140.273 Y113.868 Z2.2 F21000 G1 Z1.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.592589 G1 F7190 G1 X141.211 Y113.868 E.04289 G1 X141.211 Y112.93 E.04289 G1 X140.301 Y113.84 E.05882 ;PATH_TASK id=1279 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 X139.569 Y114.184 F21000 ;WIDTH:0.449999 G1 F7190 G1 X141.283 Y112.47 E.08204 G1 X141.283 Y111.894 E.01949 G1 X139.176 Y114 E.10083 G1 X138.601 Y114 E.01949 G1 X141.283 Y111.318 E.12839 G1 X141.283 Y110.743 E.01949 G1 X138.025 Y114 E.15595 G1 X137.449 Y114 E.01949 G1 X141.283 Y110.167 E.18351 G1 X141.283 Y109.591 E.01949 G1 X136.873 Y114 E.21107 G1 X136.298 Y114 E.01949 G1 X141.283 Y109.016 E.23862 G1 X141.283 Y108.44 E.01949 G1 X135.722 Y114 E.26618 G1 X135.146 Y114 E.01949 G1 X141.283 Y107.864 E.29374 G1 X141.283 Y107.288 E.01949 G1 X134.571 Y114 E.3213 G1 X133.995 Y114 E.01949 G1 X141.283 Y106.713 E.34886 G1 X141.283 Y106.137 E.01949 G1 X133.419 Y114 E.37642 G1 X132.844 Y114 E.01949 G1 X140.845 Y106 E.383 G1 X140.269 Y106 E.01949 G1 X132.519 Y113.749 E.37098 G1 X132.519 Y113.174 E.01949 G1 X139.693 Y106 E.34343 G1 X139.117 Y106 E.01949 G1 X132.519 Y112.598 E.31587 G1 X132.519 Y112.022 E.01949 G1 X138.542 Y106 E.28831 G1 X137.966 Y106 E.01949 G1 X132.519 Y111.447 E.26075 G1 X132.519 Y110.871 E.01949 G1 X137.39 Y106 E.23319 G1 X136.815 Y106 E.01949 G1 X132.519 Y110.295 E.20564 G1 X132.519 Y109.72 E.01949 G1 X136.239 Y106 E.17808 G1 X135.663 Y106 E.01949 G1 X132.519 Y109.144 E.15052 G1 X132.519 Y108.568 E.01949 G1 X135.088 Y106 E.12296 G1 X134.512 Y106 E.01949 G1 X132.519 Y107.993 E.0954 G1 X132.519 Y107.417 E.01949 G1 X133.936 Y106 E.06784 G1 X133.36 Y106 E.01949 G1 X132.336 Y107.024 E.04905 ;PATH_TASK id=1280 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.2 F720 G1 X129.833 Y106.03 Z2.2 F21000 G1 Z1.6 F720 G1 E.7 F1500 ;WIDTH:0.388948 G1 F7190 G1 X132.315 Y106.03 E.07143 ;PATH_TASK id=1281 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 ;WIDTH:0.401684 G1 X132.362 Y106.039 E.00142 ;PATH_TASK id=1282 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 ;WIDTH:0.414419 G1 X132.409 Y106.048 E.00147 ;PATH_TASK id=1283 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.2 F720 G1 X128.679 Y106 Z2.2 F21000 G1 Z1.6 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F7190 G1 X129.331 Y106 E.02204 G1 X128.924 Y106.407 E.01949 G1 X129.697 Y106.407 E.02617 G1 X132.112 Y108.822 E.11561 G1 X132.112 Y112.967 E.1403 G1 X125.145 Y106 E.33352 G1 X121 Y106 E.1403 G1 X128.593 Y113.593 E.36351 G1 X127.74 Y113.593 E.02889 G1 X128.147 Y114 E.01949 G1 X124.855 Y114 E.11141 G1 X116.855 Y106 E.383 G1 X112.71 Y106 E.1403 G1 X120.71 Y114 E.383 G1 X118.71 Y114 E.0677 ;PATH_TASK id=1284 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.2 F720 G1 X128.548 Y113.97 Z2.2 F21000 G1 Z1.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.38894 G1 F7190 G1 X132.187 Y113.97 E.1047 ;PATH_TASK id=1285 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.2 F720 G1 X110.564 Y106 Z2.2 F21000 G1 Z1.6 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F7190 G1 X108.564 Y106 E.0677 G1 X116.565 Y114 E.383 G1 X112.42 Y114 E.1403 G1 X104.419 Y106 E.383 G1 X106.419 Y106 E.0677 ;PATH_TASK id=1286 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.2 F720 G1 X106.275 Y114 Z2.2 F21000 G1 Z1.6 F720 G1 E.7 F1500 G1 F7190 G1 X108.275 Y114 E.0677 G1 X100.274 Y106 E.383 G1 X97.5 Y106 E.09393 G1 X97.5 Y107.37 E.04638 G1 X104.13 Y114 E.31741 G1 X99.985 Y114 E.1403 G1 X97.5 Y111.515 E.11899 G1 X97.5 Y113.515 E.0677 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:1.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;1.8 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;1.8 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1287 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 M486 S0 G1 Z2.4 F720 G1 X142.302 Y105.654 Z2.4 F21000 G1 Z1.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F5395 G1 X142.302 Y114.346 E.29424 G1 X97.154 Y114.346 E1.52823 G1 X97.154 Y105.654 E.29424 G1 X142.262 Y105.654 E1.52688 ;PATH_TASK id=1288 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 M204 T3000 G1 X142.262 Y105.611 F21000 G1 X142.345 Y105.611 G1 X142.731 Y105.225 M204 P3000 ;TYPE:Outer wall G1 F5395 G1 X142.731 Y114.775 E.32326 G1 X96.725 Y114.775 E1.55724 G1 X96.725 Y105.225 E.32326 G1 X142.691 Y105.225 E1.55589 ;PATH_TASK id=1289 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z2.4 F720 G1 X142.345 Y105.611 Z2.4 F21000 G1 X142.345 Y106.591 G1 X142.141 Y106.591 G1 Z1.8 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.42674 G1 F5395 G1 X141.364 Y105.815 E.03505 ;PATH_TASK id=1290 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X140.822 Y105.815 F21000 G1 F5395 G1 X142.141 Y107.134 E.05955 ;PATH_TASK id=1291 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X142.141 Y107.677 F21000 G1 F5395 G1 X140.279 Y105.815 E.08405 ;PATH_TASK id=1292 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X139.736 Y105.815 F21000 G1 F5395 G1 X142.141 Y108.22 E.10855 ;PATH_TASK id=1293 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X142.141 Y108.763 F21000 G1 F5395 G1 X139.193 Y105.815 E.13305 ;PATH_TASK id=1294 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X138.65 Y105.815 F21000 G1 F5395 G1 X142.141 Y109.305 E.15755 ;PATH_TASK id=1295 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X142.141 Y109.848 F21000 G1 F5395 G1 X138.645 Y106.352 E.15779 ;PATH_TASK id=1296 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X138.645 Y106.895 F21000 G1 F5395 G1 X142.141 Y110.391 E.15779 ;PATH_TASK id=1297 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X142.141 Y110.934 F21000 G1 F5395 G1 X138.645 Y107.438 E.15779 ;PATH_TASK id=1298 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X138.645 Y107.981 F21000 G1 F5395 G1 X142.141 Y111.477 E.15779 ;PATH_TASK id=1299 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X142.141 Y112.019 F21000 G1 F5395 G1 X138.645 Y108.523 E.15779 ;PATH_TASK id=1300 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X138.645 Y109.066 F21000 G1 F5395 G1 X142.141 Y112.562 E.15779 ;PATH_TASK id=1301 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X142.141 Y113.105 F21000 G1 F5395 G1 X138.645 Y109.609 E.15779 ;PATH_TASK id=1302 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X138.645 Y110.152 F21000 G1 F5395 G1 X142.141 Y113.648 E.15779 ;PATH_TASK id=1303 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X142.135 Y114.185 F21000 G1 F5395 G1 X138.645 Y110.695 E.15754 ;PATH_TASK id=1304 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X138.645 Y111.237 F21000 G1 F5395 G1 X141.593 Y114.185 E.13304 ;PATH_TASK id=1305 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X141.05 Y114.185 F21000 G1 F5395 G1 X138.645 Y111.78 E.10854 ;PATH_TASK id=1306 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X138.645 Y112.323 F21000 G1 F5395 G1 X140.507 Y114.185 E.08404 ;PATH_TASK id=1307 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X139.964 Y114.185 F21000 G1 F5395 G1 X138.645 Y112.866 E.05954 ;PATH_TASK id=1308 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 X138.645 Y113.409 F21000 G1 F5395 G1 X139.421 Y114.185 E.03504 ;PATH_TASK id=1309 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.4 F720 G1 X137.427 Y106.129 Z2.4 F21000 G1 Z1.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.586338 G1 F5395 G1 X138.354 Y107.056 E.05928 G1 X138.354 Y106.129 E.04192 G1 X137.467 Y106.129 E.04011 ;PATH_TASK id=1310 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.4 F720 G1 X138.606 Y107.692 Z2.4 F21000 G1 Z1.8 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F5395 G1 X136.913 Y106 E.08102 G1 X136.337 Y106 E.01949 G1 X138.423 Y108.085 E.09981 G1 X138.423 Y108.66 E.01949 G1 X135.762 Y106 E.12737 G1 X135.186 Y106 E.01949 G1 X138.423 Y109.236 E.15493 G1 X138.423 Y109.812 E.01949 G1 X134.61 Y106 E.18249 G1 X134.035 Y106 E.01949 G1 X138.423 Y110.387 E.21004 G1 X138.423 Y110.963 E.01949 G1 X133.459 Y106 E.2376 G1 X133.4 Y106 E.00199 G1 X133.194 Y106.206 E.00988 G1 X133.194 Y106.31 E.00353 G1 X138.423 Y111.539 E.25029 G1 X138.423 Y112.115 E.01949 G1 X133.194 Y106.886 E.25029 G1 X133.194 Y107.462 E.01949 G1 X138.423 Y112.69 E.25029 G1 X138.423 Y113.266 E.01949 G1 X133.194 Y108.037 E.25029 G1 X133.194 Y108.613 E.01949 G1 X138.423 Y113.842 E.25029 G1 X138.423 Y114 E.00538 G1 X138.006 Y114 E.01411 G1 X133.194 Y109.189 E.23034 G1 X133.194 Y109.764 E.01949 G1 X137.43 Y114 E.20278 G1 X136.854 Y114 E.01949 G1 X133.194 Y110.34 E.17522 G1 X133.194 Y110.916 E.01949 G1 X136.279 Y114 E.14766 G1 X135.703 Y114 E.01949 G1 X133.194 Y111.491 E.12011 G1 X133.194 Y112.067 E.01949 G1 X135.127 Y114 E.09255 G1 X134.552 Y114 E.01949 G1 X133.194 Y112.643 E.06499 G1 X133.194 Y113.219 E.01949 G1 X134.159 Y114.184 E.0462 ;PATH_TASK id=1311 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.4 F720 G1 X131.955 Y114.181 Z2.4 F21000 G1 Z1.8 F720 G1 E.7 F1500 M204 P1500 ;TYPE:Internal Bridge ;WIDTH:0.4 ;HEIGHT:0.4 G1 F4500 M106 S255 G1 X132.765 Y113.371 E.05985 G1 X132.765 Y112.735 E.03325 G1 X131.521 Y113.979 E.09191 G1 X130.885 Y113.979 E.03325 G1 X132.765 Y112.099 E.13893 G1 X132.765 Y111.462 E.03325 G1 X130.249 Y113.979 E.18595 G1 X129.612 Y113.979 E.03325 G1 X132.765 Y110.826 E.23297 G1 X132.765 Y110.19 E.03325 G1 X128.976 Y113.979 E.27999 G1 X128.602 Y113.979 E.01955 G1 X128.579 Y113.826 E.00806 G1 X128.535 Y113.783 E.0032 G1 X132.765 Y109.553 E.31253 G1 X132.765 Y108.917 E.03325 G1 X128.217 Y113.465 E.33604 G1 X127.899 Y113.147 E.02351 G1 X132.765 Y108.28 E.35955 G1 X132.765 Y107.644 E.03325 G1 X129.653 Y110.756 E.22993 G1 X129.335 Y110.438 E.02351 G1 X132.765 Y107.008 E.25344 G1 X132.765 Y106.371 E.03325 G1 X129.017 Y110.119 E.27695 G1 X128.699 Y109.801 E.02351 G1 X132.479 Y106.021 E.27931 G1 X131.843 Y106.021 E.03325 G1 X128.381 Y109.483 E.2558 G1 X128.062 Y109.165 E.02351 G1 X131.206 Y106.021 E.23229 G1 X130.57 Y106.021 E.03325 G1 X129.817 Y106.774 E.05565 G1 X129.499 Y106.456 E.02351 G1 X130.136 Y105.819 E.0471 ;PATH_TASK id=1312 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.4 F720 G1 X129.288 Y107.315 Z2.4 F21000 G1 Z1.8 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 ;HEIGHT:0.2 G1 F5395 M106 S252 G1 X127.874 Y108.729 E.0677 G1 X125.145 Y106 E.13066 G1 X121 Y106 E.1403 G1 X127.711 Y112.711 E.32126 G1 X127.284 Y113.137 E.02043 G1 X128.147 Y114 E.04131 G1 X124.855 Y114 E.11141 G1 X116.855 Y106 E.383 G1 X112.71 Y106 E.1403 G1 X120.71 Y114 E.383 G1 X116.565 Y114 E.1403 G1 X108.564 Y106 E.383 G1 X110.564 Y106 E.0677 ;PATH_TASK id=1313 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.4 F720 G1 X110.42 Y114 Z2.4 F21000 G1 Z1.8 F720 G1 E.7 F1500 G1 F5395 G1 X112.42 Y114 E.0677 G1 X104.419 Y106 E.383 G1 X100.274 Y106 E.1403 G1 X108.275 Y114 E.383 G1 X104.13 Y114 E.1403 G1 X97.5 Y107.37 E.31741 G1 X97.5 Y111.515 E.1403 G1 X99.985 Y114 E.11899 G1 X97.985 Y114 E.0677 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;2 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;2 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1314 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 M486 S0 G1 Z2.6 F720 G1 X139.442 Y114.346 Z2.6 F21000 G1 Z2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F5220 G1 X97.154 Y114.346 E1.43142 G1 X97.154 Y105.654 E.29424 G1 X139.442 Y105.654 E1.43142 G1 X139.442 Y114.306 E.29289 ;PATH_TASK id=1315 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 M204 T3000 G1 X139.485 Y114.306 F21000 G1 X139.485 Y114.389 G1 X139.485 Y114.389 G1 X139.871 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F5220 G1 X96.725 Y114.775 E1.46043 G1 X96.725 Y105.225 E.32326 M73 P89 R4 G1 X139.871 Y105.225 E1.46043 G1 X139.871 Y114.735 E.3219 ;PATH_TASK id=1316 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z2.6 F720 G1 X139.485 Y114.389 Z2.6 F21000 G1 X139.485 Y114.389 G1 X139.485 Y113.398 G1 X139.281 Y113.398 G1 Z2 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.431911 G1 F5220 G1 X138.493 Y114.185 E.03602 ;PATH_TASK id=1317 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X137.943 Y114.185 F21000 G1 F5220 G1 X139.281 Y112.847 E.06119 ;PATH_TASK id=1318 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X139.281 Y112.297 F21000 G1 F5220 G1 X137.393 Y114.185 E.08635 ;PATH_TASK id=1319 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X136.843 Y114.185 F21000 G1 F5220 G1 X139.281 Y111.747 E.11151 ;PATH_TASK id=1320 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X139.281 Y111.197 F21000 G1 F5220 G1 X136.293 Y114.185 E.13668 ;PATH_TASK id=1321 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X135.743 Y114.185 F21000 G1 F5220 G1 X139.281 Y110.647 E.16184 ;PATH_TASK id=1322 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X139.281 Y110.097 F21000 G1 F5220 G1 X135.193 Y114.185 E.18701 ;PATH_TASK id=1323 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X134.642 Y114.185 F21000 G1 F5220 G1 X139.281 Y109.547 E.21217 ;PATH_TASK id=1324 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X139.281 Y108.997 F21000 G1 F5220 G1 X134.092 Y114.185 E.23733 ;PATH_TASK id=1325 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X133.542 Y114.185 F21000 G1 F5220 G1 X139.281 Y108.447 E.2625 ;PATH_TASK id=1326 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X139.281 Y107.896 F21000 G1 F5220 G1 X132.992 Y114.185 E.28766 ;PATH_TASK id=1327 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X132.873 Y113.754 F21000 G1 F5220 G1 X139.281 Y107.346 E.29309 ;PATH_TASK id=1328 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X139.281 Y106.796 F21000 G1 F5220 G1 X132.873 Y113.204 E.29309 ;PATH_TASK id=1329 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X132.873 Y112.654 F21000 G1 F5220 G1 X139.281 Y106.246 E.29309 ;PATH_TASK id=1330 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X139.162 Y105.815 F21000 G1 F5220 G1 X132.873 Y112.103 E.28766 ;PATH_TASK id=1331 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X132.873 Y111.553 F21000 G1 F5220 G1 X138.612 Y105.815 E.26249 ;PATH_TASK id=1332 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X138.062 Y105.815 F21000 G1 F5220 G1 X132.873 Y111.003 E.23733 ;PATH_TASK id=1333 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X132.873 Y110.453 F21000 G1 F5220 G1 X137.512 Y105.815 E.21216 ;PATH_TASK id=1334 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X136.961 Y105.815 F21000 G1 F5220 G1 X132.873 Y109.903 E.187 ;PATH_TASK id=1335 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X132.873 Y109.353 F21000 G1 F5220 G1 X136.411 Y105.815 E.16184 ;PATH_TASK id=1336 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X135.861 Y105.815 F21000 G1 F5220 G1 X132.873 Y108.803 E.13667 ;PATH_TASK id=1337 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X132.873 Y108.253 F21000 G1 F5220 G1 X135.311 Y105.815 E.11151 ;PATH_TASK id=1338 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X134.761 Y105.815 F21000 G1 F5220 G1 X132.873 Y107.703 E.08635 ;PATH_TASK id=1339 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X132.873 Y107.152 F21000 G1 F5220 G1 X134.211 Y105.815 E.06118 ;PATH_TASK id=1340 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X133.661 Y105.815 F21000 G1 F5220 G1 X132.873 Y106.602 E.03602 ;PATH_TASK id=1341 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.6 F720 G1 X132.834 Y112.134 Z2.6 F21000 G1 Z2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.45 G1 F5220 G1 X130.968 Y114 E.08933 G1 X130.392 Y114 E.01949 G1 X132.651 Y111.742 E.10812 G1 X132.651 Y111.166 E.01949 G1 X129.817 Y114 E.13568 G1 X129.241 Y114 E.01949 G1 X132.651 Y110.59 E.16323 G1 X132.651 Y110.015 E.01949 G1 X128.713 Y113.953 E.1885 G1 X128.713 Y113.377 E.01949 G1 X132.651 Y109.439 E.1885 G1 X132.651 Y108.863 E.01949 G1 X128.713 Y112.801 E.1885 G1 X128.713 Y112.225 E.01949 G1 X132.651 Y108.288 E.1885 G1 X132.651 Y107.712 E.01949 G1 X128.713 Y111.65 E.1885 G1 X128.713 Y111.074 E.01949 G1 X132.651 Y107.136 E.1885 G1 X132.651 Y106.561 E.01949 G1 X128.713 Y110.498 E.1885 G1 X128.713 Y109.923 E.01949 G1 X132.636 Y106 E.1878 G1 X132.061 Y106 E.01949 G1 X128.713 Y109.347 E.16024 G1 X128.713 Y108.771 E.01949 G1 X131.485 Y106 E.13268 G1 X130.909 Y106 E.01949 G1 X128.713 Y108.196 E.10512 G1 X128.713 Y107.62 E.01949 G1 X130.333 Y106 E.07757 G1 X129.758 Y106 E.01949 G1 X128.53 Y107.227 E.05878 ;PATH_TASK id=1342 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.6 F720 G1 X123.552 Y106.407 Z2.6 F21000 G1 Z2 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F5220 G1 X125.552 Y106.407 E.0677 G1 X128.306 Y109.161 E.13185 G1 X128.306 Y113.306 E.1403 G1 X121 Y106 E.34976 G1 X116.855 Y106 E.1403 G1 X124.448 Y113.593 E.36351 G1 X122.291 Y113.593 E.07301 G1 X122.035 Y114 E.01629 G1 X120.71 Y114 E.04482 G1 X112.71 Y106 E.383 G1 X108.564 Y106 E.1403 G1 X116.565 Y114 E.383 G1 X114.565 Y114 E.0677 ;PATH_TASK id=1343 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.6 F720 G1 X122.499 Y113.97 Z2.6 F21000 G1 Z2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.388942 G1 F5220 G1 X128.432 Y113.97 E.1707 ;PATH_TASK id=1344 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.6 F720 G1 X128.561 Y106.875 Z2.6 F21000 G1 Z2 F720 G1 E.7 F1500 ;WIDTH:0.388936 G1 F5220 G1 X128.496 Y106.913 E.00216 G1 X128.561 Y106.95 E.00216 G1 X128.563 Y106.947 E.00009 ;PATH_TASK id=1345 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.6 F720 G1 X123.351 Y106.03 Z2.6 F21000 G1 Z2 F720 G1 E.7 F1500 ;WIDTH:0.388948 G1 F5220 G1 X128.51 Y106.03 E.14841 ;PATH_TASK id=1346 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 ;WIDTH:0.412975 G1 X128.571 Y106.05 E.002 ;PATH_TASK id=1347 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 ;WIDTH:0.461027 G1 X128.633 Y106.07 E.00226 ;PATH_TASK id=1348 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 ;WIDTH:0.485054 G1 X128.695 Y106.09 E.00239 ;PATH_TASK id=1349 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.6 F720 G1 X131.317 Y113.939 Z2.6 F21000 G1 Z2 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F5220 G1 X132.651 Y113.939 E.04515 G1 X132.651 Y112.605 E.04515 G1 X131.345 Y113.911 E.0625 ;PATH_TASK id=1350 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 X132.284 Y113.508 F21000 ;WIDTH:0.417236 G1 F5220 G1 X132.213 Y113.549 E.00252 G1 X132.284 Y113.589 E.00252 G1 X132.287 Y113.583 E.00021 ;PATH_TASK id=1351 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.6 F720 G1 X106.419 Y106 Z2.6 F21000 G1 Z2 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F5220 G1 X104.419 Y106 E.0677 G1 X112.42 Y114 E.383 G1 X108.275 Y114 E.1403 G1 X100.274 Y106 E.383 G1 X97.5 Y106 E.09393 G1 X97.5 Y107.37 E.04638 G1 X104.13 Y114 E.31741 G1 X99.985 Y114 E.1403 G1 X97.5 Y111.515 E.11899 G1 X97.5 Y113.515 E.0677 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:2.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;2.2 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;2.2 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1352 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 M486 S0 G1 Z2.8 F720 G1 X133.671 Y105.654 Z2.8 F21000 G1 Z2.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F4277 G1 X133.671 Y114.346 E.29424 G1 X97.154 Y114.346 E1.23605 G1 X97.154 Y105.654 E.29424 G1 X133.631 Y105.654 E1.2347 ;PATH_TASK id=1353 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 M204 T3000 G1 X133.631 Y105.611 F21000 G1 X133.713 Y105.611 G1 X134.099 Y105.225 M204 P3000 ;TYPE:Outer wall G1 F4277 G1 X134.099 Y114.775 E.32326 G1 X96.725 Y114.775 E1.26507 G1 X96.725 Y105.225 E.32326 G1 X134.059 Y105.225 E1.26371 ;PATH_TASK id=1354 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z2.8 F720 G1 X133.713 Y105.611 Z2.8 F21000 G1 X133.713 Y106.601 G1 X133.509 Y106.601 G1 Z2.2 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.431278 G1 F4277 G1 X132.723 Y105.815 E.0359 ;PATH_TASK id=1355 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X132.174 Y105.815 F21000 G1 F4277 G1 X133.509 Y107.15 E.06099 ;PATH_TASK id=1356 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X133.509 Y107.699 F21000 G1 F4277 G1 X131.625 Y105.815 E.08607 ;PATH_TASK id=1357 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X131.075 Y105.815 F21000 G1 F4277 G1 X133.509 Y108.249 E.11115 ;PATH_TASK id=1358 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X133.509 Y108.798 F21000 G1 F4277 G1 X130.97 Y106.259 E.11594 ;PATH_TASK id=1359 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X130.97 Y106.808 F21000 G1 F4277 G1 X133.509 Y109.347 E.11594 ;PATH_TASK id=1360 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X133.509 Y109.896 F21000 G1 F4277 G1 X130.97 Y107.358 E.11594 ;PATH_TASK id=1361 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X130.97 Y107.907 F21000 G1 F4277 G1 X133.509 Y110.446 E.11594 ;PATH_TASK id=1362 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X133.509 Y110.995 F21000 G1 F4277 G1 X130.97 Y108.456 E.11594 ;PATH_TASK id=1363 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X130.97 Y109.005 F21000 G1 F4277 G1 X133.509 Y111.544 E.11594 ;PATH_TASK id=1364 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X133.509 Y112.093 F21000 G1 F4277 G1 X130.97 Y109.555 E.11594 ;PATH_TASK id=1365 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X130.97 Y110.104 F21000 G1 F4277 G1 X133.509 Y112.642 E.11594 ;PATH_TASK id=1366 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X133.509 Y113.192 F21000 G1 F4277 G1 X130.97 Y110.653 E.11594 ;PATH_TASK id=1367 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X130.97 Y111.202 F21000 G1 F4277 G1 X133.509 Y113.741 E.11594 ;PATH_TASK id=1368 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X133.404 Y114.185 F21000 G1 F4277 G1 X130.97 Y111.751 E.11114 ;PATH_TASK id=1369 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X130.97 Y112.301 F21000 G1 F4277 G1 X132.855 Y114.185 E.08606 ;PATH_TASK id=1370 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X132.306 Y114.185 F21000 G1 F4277 G1 X130.97 Y112.85 E.06098 ;PATH_TASK id=1371 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X130.97 Y113.399 F21000 G1 F4277 G1 X131.757 Y114.185 E.0359 ;PATH_TASK id=1372 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.8 F720 G1 X128.137 Y114.181 Z2.8 F21000 G1 Z2.2 F720 G1 E.7 F1500 M204 P1500 ;TYPE:Internal Bridge ;WIDTH:0.4 ;HEIGHT:0.4 G1 F4277 M106 S255 G1 X128.96 Y113.359 E.06078 G1 X128.96 Y112.722 E.03325 G1 X127.703 Y113.979 E.09284 G1 X127.067 Y113.979 E.03325 G1 X128.96 Y112.086 E.13986 G1 X128.96 Y111.45 E.03325 G1 X126.43 Y113.979 E.18688 G1 X125.794 Y113.979 E.03325 G1 X128.96 Y110.813 E.2339 G1 X128.96 Y110.177 E.03325 G1 X125.158 Y113.979 E.28092 G1 X124.521 Y113.979 E.03325 G1 X128.96 Y109.54 E.32794 G1 X128.96 Y108.904 E.03325 G1 X123.885 Y113.979 E.37496 G1 X123.248 Y113.979 E.03325 G1 X128.96 Y108.268 E.42198 G1 X128.96 Y107.631 E.03325 G1 X122.612 Y113.979 E.469 G1 X122.555 Y113.979 E.00299 G1 X123.34 Y112.733 E.07696 G1 X123.281 Y112.674 E.00439 G1 X128.96 Y106.995 E.41957 G1 X128.96 Y106.359 E.03325 G1 X122.963 Y112.355 E.44308 G1 X122.645 Y112.037 E.02351 G1 X128.661 Y106.021 E.4445 G1 X128.024 Y106.021 E.03325 M73 P89 R3 G1 X122.326 Y111.719 E.42099 G1 X122.008 Y111.401 E.02351 G1 X127.388 Y106.021 E.39748 G1 X126.752 Y106.021 E.03325 G1 X121.69 Y111.083 E.37397 G1 X121.372 Y110.764 E.02351 G1 X126.115 Y106.021 E.35046 G1 X125.479 Y106.021 E.03325 G1 X123.126 Y108.374 E.17382 G1 X122.808 Y108.055 E.02351 G1 X124.842 Y106.021 E.15031 G1 X124.206 Y106.021 E.03325 G1 X122.49 Y107.737 E.1268 G1 X122.172 Y107.419 E.02351 G1 X123.772 Y105.819 E.11825 ;PATH_TASK id=1373 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.8 F720 G1 X122.485 Y108.339 Z2.8 F21000 G1 Z2.2 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 ;HEIGHT:0.2 G1 F4277 M106 S252 G1 X121.498 Y107.351 E.04727 G1 X121.925 Y106.925 E.02043 G1 X121 Y106 E.04428 G1 X116.855 Y106 E.1403 G1 X121.125 Y110.27 E.20442 G1 X120.698 Y110.697 E.02043 G1 X122.795 Y112.794 E.10039 G1 X122.035 Y114 E.04828 G1 X120.71 Y114 E.04482 G1 X112.71 Y106 E.383 G1 X108.564 Y106 E.1403 G1 X116.565 Y114 E.383 G1 X114.565 Y114 E.0677 ;PATH_TASK id=1374 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.8 F720 G1 X106.419 Y106 Z2.8 F21000 G1 Z2.2 F720 G1 E.7 F1500 G1 F4277 G1 X104.419 Y106 E.0677 G1 X112.42 Y114 E.383 G1 X108.275 Y114 E.1403 G1 X100.274 Y106 E.383 G1 X97.5 Y106 E.09393 G1 X97.5 Y107.37 E.04638 G1 X104.13 Y114 E.31741 G1 X99.985 Y114 E.1403 G1 X97.5 Y111.515 E.11899 G1 X97.5 Y113.515 E.0677 ;PATH_TASK id=1375 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z2.8 F720 G1 X129.388 Y106.206 Z2.8 F21000 G1 Z2.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.449999 G1 F4277 G1 X129.388 Y113.794 E.25685 G1 X129.533 Y113.939 E.00695 G1 X130.748 Y113.939 E.04112 G1 X130.748 Y106.061 E.26669 G1 X129.533 Y106.061 E.04112 G1 X129.416 Y106.178 E.0056 ;PATH_TASK id=1376 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000 G1 X129.83 Y106.502 F21000 ;WIDTH:0.519342 G1 F4277 G1 X129.83 Y113.498 E.27712 G1 X130.306 Y113.498 E.01887 G1 X130.306 Y106.502 E.27712 G1 X129.87 Y106.502 E.01729 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:2.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;2.4 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;2.4 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1377 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 M486 S0 G1 Z3 F720 G1 X131.768 Y114.346 Z3 F21000 G1 Z2.4 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F3847 G1 X97.154 Y114.346 E1.17165 G1 X97.154 Y105.654 E.29424 G1 X131.768 Y105.654 E1.17165 G1 X131.768 Y114.306 E.29289 ;PATH_TASK id=1378 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 M204 T3000 G1 X131.81 Y114.306 F21000 G1 X131.811 Y114.389 G1 X131.811 Y114.389 G1 X132.196 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F3847 G1 X96.725 Y114.775 E1.20066 G1 X96.725 Y105.225 E.32326 G1 X132.196 Y105.225 E1.20066 G1 X132.196 Y114.735 E.3219 ;PATH_TASK id=1379 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z3 F720 G1 X131.811 Y114.389 Z3 F21000 G1 X131.811 Y114.389 G1 X131.81 Y113.399 G1 X131.606 Y113.399 G1 Z2.4 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.431278 G1 F3847 G1 X130.82 Y114.185 E.0359 ;PATH_TASK id=1380 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X130.271 Y114.185 F21000 G1 F3847 G1 X131.606 Y112.85 E.06099 ;PATH_TASK id=1381 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X131.606 Y112.301 F21000 M73 P90 R3 G1 F3847 G1 X129.722 Y114.185 E.08607 ;PATH_TASK id=1382 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X129.172 Y114.185 F21000 G1 F3847 G1 X131.606 Y111.751 E.11115 ;PATH_TASK id=1383 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X131.606 Y111.202 F21000 G1 F3847 G1 X129.068 Y113.741 E.11594 ;PATH_TASK id=1384 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X129.068 Y113.192 F21000 G1 F3847 G1 X131.606 Y110.653 E.11594 ;PATH_TASK id=1385 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X131.606 Y110.104 F21000 G1 F3847 G1 X129.068 Y112.642 E.11594 ;PATH_TASK id=1386 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X129.068 Y112.093 F21000 G1 F3847 G1 X131.606 Y109.554 E.11594 ;PATH_TASK id=1387 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X131.606 Y109.005 F21000 G1 F3847 G1 X129.068 Y111.544 E.11594 ;PATH_TASK id=1388 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X129.068 Y110.995 F21000 G1 F3847 G1 X131.606 Y108.456 E.11594 ;PATH_TASK id=1389 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X131.606 Y107.907 F21000 G1 F3847 G1 X129.068 Y110.445 E.11594 ;PATH_TASK id=1390 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X129.068 Y109.896 F21000 G1 F3847 G1 X131.606 Y107.358 E.11594 ;PATH_TASK id=1391 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X131.606 Y106.808 F21000 G1 F3847 G1 X129.068 Y109.347 E.11594 ;PATH_TASK id=1392 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X129.068 Y108.798 F21000 G1 F3847 G1 X131.606 Y106.259 E.11594 ;PATH_TASK id=1393 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X131.501 Y105.815 F21000 G1 F3847 G1 X129.068 Y108.249 E.11114 ;PATH_TASK id=1394 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X129.068 Y107.699 F21000 G1 F3847 G1 X130.952 Y105.815 E.08606 ;PATH_TASK id=1395 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X130.403 Y105.815 F21000 G1 F3847 G1 X129.068 Y107.15 E.06098 ;PATH_TASK id=1396 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X129.068 Y106.601 F21000 G1 F3847 G1 X129.854 Y105.815 E.0359 ;PATH_TASK id=1397 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3 F720 G1 X128.772 Y112.922 Z3 F21000 G1 Z2.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.595971 G1 F3847 G1 X127.828 Y113.866 E.0614 G1 X128.772 Y113.866 E.04342 G1 X128.772 Y112.962 E.04158 ;PATH_TASK id=1398 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3 F720 G1 X127.12 Y114.184 Z3 F21000 G1 Z2.4 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F3847 G1 X128.845 Y112.458 E.0826 G1 X128.845 Y111.882 E.01949 G1 X126.727 Y114 E.10139 G1 X126.152 Y114 E.01949 G1 X128.845 Y111.307 E.12894 G1 X128.845 Y110.731 E.01949 G1 X125.576 Y114 E.1565 G1 X125 Y114 E.01949 G1 X128.845 Y110.155 E.18406 G1 X128.845 Y109.58 E.01949 G1 X124.424 Y114 E.21162 G1 X123.849 Y114 E.01949 G1 X128.845 Y109.004 E.23918 G1 X128.845 Y108.428 E.01949 G1 X123.273 Y114 E.26673 G1 X122.712 Y114 E.019 G1 X122.712 Y113.986 E.00049 G1 X128.845 Y107.853 E.2936 G1 X128.845 Y107.277 E.01949 G1 X122.712 Y113.41 E.2936 G1 X122.712 Y112.835 E.01949 G1 X128.845 Y106.701 E.2936 G1 X128.845 Y106.126 E.01949 G1 X122.712 Y112.259 E.2936 G1 X122.712 Y111.683 E.01949 G1 X128.395 Y106 E.27207 G1 X127.82 Y106 E.01949 G1 X122.712 Y111.107 E.24451 G1 X122.712 Y110.532 E.01949 G1 X127.244 Y106 E.21696 G1 X126.668 Y106 E.01949 G1 X122.712 Y109.956 E.1894 G1 X122.712 Y109.38 E.01949 G1 X126.093 Y106 E.16184 G1 X125.517 Y106 E.01949 G1 X122.712 Y108.805 E.13428 G1 X122.712 Y108.229 E.01949 G1 X124.941 Y106 E.10672 G1 X124.366 Y106 E.01949 G1 X122.712 Y107.653 E.07916 G1 X122.712 Y107.078 E.01949 G1 X123.973 Y105.816 E.06038 ;PATH_TASK id=1399 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 X122.788 Y106.052 F21000 ;WIDTH:0.539932 G1 F3847 G1 X122.726 Y106.052 E.00257 G1 X122.695 Y106.106 E.00257 G1 X122.726 Y106.159 E.00257 G1 X122.788 Y106.159 E.00257 G1 X122.799 Y106.14 E.00091 ;PATH_TASK id=1400 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3 F720 G1 X122.305 Y109.515 Z3 F21000 G1 Z2.4 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F3847 G1 X122.305 Y107.515 E.0677 G1 X121.891 Y107.24 E.01679 G3 X120.951 Y106 I2.592 J-2.941 E.05305 G1 X116.806 Y106 E.1403 G2 X117.746 Y107.24 I3.532 J-1.7 E.05305 G1 X119.819 Y108.615 E.08417 G1 X120.168 Y108.964 E.01671 G1 X121.542 Y111.036 E.08417 G2 X122.305 Y111.66 I1.92 J-1.57 E.03356 G1 X122.305 Y114 E.07923 G1 X120.759 Y114 E.05232 G2 X119.819 Y112.76 I-3.532 J1.7 E.05305 G1 X117.746 Y111.385 E.08417 G1 X117.397 Y111.036 E.01671 G1 X116.023 Y108.964 E.08417 G1 X115.674 Y108.615 E.01671 G1 X113.601 Y107.24 E.08417 G3 X112.661 Y106 I2.592 J-2.941 E.05305 G1 X108.516 Y106 E.1403 G2 X109.456 Y107.24 I3.532 J-1.7 E.05305 G1 X111.529 Y108.615 E.08417 G1 X111.878 Y108.964 E.01671 G1 X113.252 Y111.036 E.08417 G1 X113.601 Y111.385 E.01671 G1 X115.674 Y112.76 E.08417 G3 X116.614 Y114 I-2.592 J2.941 E.05305 G1 X112.469 Y114 E.1403 G2 X111.529 Y112.76 I-3.532 J1.7 E.05305 G1 X109.456 Y111.385 E.08417 G1 X109.107 Y111.036 E.01671 G1 X107.733 Y108.964 E.08417 G1 X107.384 Y108.615 E.01671 G1 X105.311 Y107.24 E.08417 G3 X104.371 Y106 I2.592 J-2.941 E.05305 G1 X100.226 Y106 E.1403 G2 X101.166 Y107.24 I3.532 J-1.7 E.05305 G1 X103.239 Y108.615 E.08417 G1 X103.588 Y108.964 E.01671 G1 X104.962 Y111.036 E.08417 G1 X105.311 Y111.385 E.01671 G1 X107.384 Y112.76 E.08417 G3 X108.324 Y114 I-2.592 J2.941 E.05305 G1 X104.179 Y114 E.1403 G2 X103.239 Y112.76 I-3.532 J1.7 E.05305 G1 X101.166 Y111.385 E.08417 G1 X100.817 Y111.036 E.01671 G1 X99.443 Y108.964 E.08417 G1 X99.094 Y108.615 E.01671 G1 X97.5 Y107.558 E.06474 G1 X97.5 Y111.703 E.1403 G1 X99.094 Y112.76 E.06474 G3 X100.034 Y114 I-2.592 J2.941 E.05305 G1 X98.034 Y114 E.0677 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:2.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;2.6 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;2.6 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1401 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 M486 S0 G1 Z3.2 F720 G1 X129.865 Y114.346 Z3.2 F21000 G1 Z2.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F3925 G1 X97.154 Y114.346 E1.10724 G1 X97.154 Y105.654 E.29424 G1 X129.865 Y105.654 E1.10724 G1 X129.865 Y114.306 E.29289 ;PATH_TASK id=1402 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 M204 T3000 G1 X129.908 Y114.306 F21000 G1 X129.908 Y114.389 G1 X129.908 Y114.389 G1 X130.293 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F3925 G1 X96.725 Y114.775 E1.13625 G1 X96.725 Y105.225 E.32326 G1 X130.293 Y105.225 E1.13625 G1 X130.293 Y114.735 E.3219 ;PATH_TASK id=1403 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z3.2 F720 G1 X129.908 Y114.389 Z3.2 F21000 G1 X127.39 Y113.96 G1 X127.39 Y107.35 G1 X126.942 Y107.35 G1 Z2.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill G1 F3925 G1 X126.942 Y106.061 E.04364 G1 X125.653 Y106.061 E.04364 G1 X126.914 Y107.322 E.06036 ;PATH_TASK id=1404 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X126.586 Y106.401 F21000 ;WIDTH:0.39104 G1 F3925 G1 X126.521 Y106.438 E.00218 G1 X126.586 Y106.476 E.00218 G1 X126.588 Y106.473 E.0001 ;PATH_TASK id=1405 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.2 F720 G1 X125.121 Y105.816 Z3.2 F21000 G1 Z2.6 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F3925 G1 X126.942 Y107.638 E.08719 G1 X126.942 Y108.213 E.01949 G1 X124.728 Y106 E.10598 G1 X124.153 Y106 E.01949 G1 X126.942 Y108.789 E.13353 G1 X126.942 Y109.365 E.01949 G1 X123.577 Y106 E.16109 G1 X123.001 Y106 E.01949 G1 X126.942 Y109.941 E.18865 G1 X126.942 Y110.516 E.01949 G1 X122.426 Y106 E.21621 G1 X121.85 Y106 E.01949 G1 X126.942 Y111.092 E.24377 G1 X126.942 Y111.668 E.01949 G1 X121.289 Y106.014 E.27063 G1 X121.289 Y106.59 E.01949 G1 X126.942 Y112.243 E.27063 G1 X126.942 Y112.819 E.01949 G1 X121.289 Y107.165 E.27063 G1 X121.289 Y107.741 E.01949 G1 X126.942 Y113.395 E.27063 G1 X126.942 Y113.97 E.01949 G1 X121.289 Y108.317 E.27063 G1 X121.289 Y108.893 E.01949 G1 X126.397 Y114 E.24451 G1 X125.821 Y114 E.01949 G1 X121.289 Y109.468 E.21696 G1 X121.289 Y110.044 E.01949 G1 X125.245 Y114 E.1894 G1 X124.67 Y114 E.01949 G1 X121.289 Y110.62 E.16184 G1 X121.289 Y111.195 E.01949 G1 X124.094 Y114 E.13428 G1 X123.518 Y114 E.01949 G1 X121.289 Y111.771 E.10672 G1 X121.289 Y112.347 E.01949 G1 X122.943 Y114 E.07916 G1 X122.367 Y114 E.01949 G1 X121.106 Y112.739 E.06038 ;PATH_TASK id=1406 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X120.882 Y112.083 F21000 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F3925 G1 X120.882 Y110.083 E.0677 G1 X120.521 Y108.964 E.0398 G1 X119.819 Y108.261 E.03364 G1 X117.746 Y107.594 E.0737 G1 X117.043 Y106.891 E.03364 G1 X116.756 Y106 E.03171 G1 X112.611 Y106 E.1403 G1 X112.898 Y106.891 E.03171 G1 X113.601 Y107.594 E.03364 G1 X115.674 Y108.261 E.0737 G1 X116.376 Y108.964 E.03364 G1 X117.043 Y111.036 E.0737 G1 X117.746 Y111.739 E.03364 G1 X119.819 Y112.406 E.0737 G1 X120.521 Y113.109 E.03364 G1 X120.808 Y114 E.03171 G1 X116.663 Y114 E.1403 G1 X116.376 Y113.109 E.03171 G1 X115.674 Y112.406 E.03364 G1 X113.601 Y111.739 E.0737 G1 X112.898 Y111.036 E.03364 G1 X112.231 Y108.964 E.0737 G1 X111.529 Y108.261 E.03364 G1 X109.456 Y107.594 E.0737 G1 X108.753 Y106.891 E.03364 G1 X108.466 Y106 E.03171 G1 X110.466 Y106 E.0677 ;PATH_TASK id=1407 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.2 F720 G1 X110.373 Y114 Z3.2 F21000 G1 Z2.6 F720 G1 E.7 F1500 G1 F3925 G1 X108.373 Y114 E.0677 G1 X108.086 Y113.109 E.03171 G1 X107.384 Y112.406 E.03364 G1 X105.311 Y111.739 E.0737 G1 X104.608 Y111.036 E.03364 G1 X103.941 Y108.964 E.0737 G1 X103.239 Y108.261 E.03364 G1 X101.166 Y107.594 E.0737 G1 X100.463 Y106.891 E.03364 G1 X100.176 Y106 E.03171 G1 X104.321 Y106 E.1403 G1 X104.608 Y106.891 E.03171 G1 X105.311 Y107.594 E.03364 G1 X107.384 Y108.261 E.0737 G1 X108.086 Y108.964 E.03364 G1 X108.753 Y111.036 E.0737 G1 X109.456 Y111.739 E.03364 G1 X111.529 Y112.406 E.0737 G1 X112.231 Y113.109 E.03364 G1 X112.518 Y114 E.03171 G1 X114.518 Y114 E.0677 ;PATH_TASK id=1408 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.2 F720 G1 X121.365 Y113.841 Z3.2 F21000 G1 Z2.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.53993 G1 F3925 G1 X121.303 Y113.841 E.00257 G1 X121.272 Y113.894 E.00257 G1 X121.303 Y113.948 E.00257 G1 X121.365 Y113.948 E.00257 G1 X121.376 Y113.929 E.00091 ;PATH_TASK id=1409 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.2 F720 G1 X129.703 Y106.601 Z3.2 F21000 G1 Z2.6 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.431278 G1 F3925 G1 X128.917 Y105.815 E.0359 ;PATH_TASK id=1410 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X128.368 Y105.815 F21000 G1 F3925 G1 X129.703 Y107.15 E.06099 ;PATH_TASK id=1411 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X129.703 Y107.699 F21000 G1 F3925 G1 X127.819 Y105.815 E.08607 ;PATH_TASK id=1412 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X127.27 Y105.815 F21000 G1 F3925 G1 X129.703 Y108.249 E.11115 ;PATH_TASK id=1413 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X129.703 Y108.798 F21000 G1 F3925 G1 X127.165 Y106.259 E.11594 ;PATH_TASK id=1414 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X127.165 Y106.808 F21000 G1 F3925 G1 X129.703 Y109.347 E.11594 ;PATH_TASK id=1415 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X129.703 Y109.896 F21000 G1 F3925 G1 X127.165 Y107.358 E.11594 ;PATH_TASK id=1416 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X127.165 Y107.907 F21000 G1 F3925 G1 X129.703 Y110.446 E.11594 ;PATH_TASK id=1417 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X129.703 Y110.995 F21000 G1 F3925 G1 X127.165 Y108.456 E.11594 ;PATH_TASK id=1418 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X127.165 Y109.005 F21000 G1 F3925 G1 X129.703 Y111.544 E.11594 ;PATH_TASK id=1419 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X129.703 Y112.093 F21000 G1 F3925 G1 X127.165 Y109.555 E.11594 ;PATH_TASK id=1420 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X127.165 Y110.104 F21000 G1 F3925 G1 X129.703 Y112.642 E.11594 ;PATH_TASK id=1421 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X129.703 Y113.192 F21000 G1 F3925 G1 X127.165 Y110.653 E.11594 ;PATH_TASK id=1422 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X127.165 Y111.202 F21000 G1 F3925 G1 X129.703 Y113.741 E.11594 ;PATH_TASK id=1423 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X129.598 Y114.185 F21000 G1 F3925 G1 X127.165 Y111.751 E.11114 ;PATH_TASK id=1424 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X127.165 Y112.301 F21000 G1 F3925 G1 X129.049 Y114.185 E.08606 ;PATH_TASK id=1425 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X128.5 Y114.185 F21000 G1 F3925 G1 X127.165 Y112.85 E.06098 ;PATH_TASK id=1426 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 X127.165 Y113.399 F21000 G1 F3925 G1 X127.951 Y114.185 E.0359 ;PATH_TASK id=1427 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.2 F720 G1 X97.5 Y113.893 Z3.2 F21000 G1 Z2.6 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F3925 G1 X97.5 Y111.893 E.0677 G1 X99.094 Y112.406 E.05668 G1 X99.796 Y113.109 E.03364 G1 X100.083 Y114 E.03171 G1 X104.228 Y114 E.1403 G1 X103.941 Y113.109 E.03171 G1 X103.239 Y112.406 E.03364 G1 X101.166 Y111.739 E.0737 G1 X100.463 Y111.036 E.03364 G1 X99.796 Y108.964 E.0737 G1 X99.094 Y108.261 E.03364 G1 X97.5 Y107.748 E.05668 G1 X97.5 Y106 E.05918 G1 X97.751 Y106 E.00852 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:2.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;2.8 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;2.8 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1428 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 M486 S0 G1 Z3.4 F720 G1 X127.962 Y114.346 Z3.4 F21000 G1 Z2.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F4179 G1 X97.154 Y114.346 E1.04283 G1 X97.154 Y105.654 E.29424 G1 X127.962 Y105.654 E1.04283 G1 X127.962 Y114.306 E.29289 ;PATH_TASK id=1429 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 M204 T3000 G1 X128.005 Y114.306 F21000 G1 X128.005 Y114.389 G1 X128.39 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F4179 G1 X96.725 Y114.775 E1.07184 G1 X96.725 Y105.225 E.32326 G1 X128.39 Y105.225 E1.07184 G1 X128.39 Y114.735 E.3219 ;PATH_TASK id=1430 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z3.4 F720 G1 X128.005 Y114.389 Z3.4 F21000 G1 X128.005 Y113.403 G1 X127.801 Y113.403 G1 Z2.8 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.429277 G1 F4179 G1 X127.019 Y114.185 E.03553 ;PATH_TASK id=1431 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X126.472 Y114.185 F21000 G1 F4179 G1 X127.801 Y112.857 E.06035 ;PATH_TASK id=1432 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X127.801 Y112.31 F21000 G1 F4179 G1 X125.926 Y114.185 E.08517 ;PATH_TASK id=1433 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X125.379 Y114.185 F21000 G1 F4179 G1 X127.801 Y111.764 E.11 ;PATH_TASK id=1434 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X127.801 Y111.218 F21000 G1 F4179 G1 X124.833 Y114.185 E.13482 ;PATH_TASK id=1435 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X124.287 Y114.185 F21000 G1 F4179 G1 X127.801 Y110.671 E.15965 ;PATH_TASK id=1436 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X127.801 Y110.125 F21000 G1 F4179 G1 X123.74 Y114.185 E.18447 ;PATH_TASK id=1437 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X123.194 Y114.185 F21000 G1 F4179 G1 X127.801 Y109.578 E.20929 ;PATH_TASK id=1438 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X127.801 Y109.032 F21000 G1 F4179 G1 X122.648 Y114.185 E.23412 ;PATH_TASK id=1439 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X122.586 Y113.7 F21000 G1 F4179 G1 X127.801 Y108.486 E.23689 ;PATH_TASK id=1440 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X127.801 Y107.939 F21000 G1 F4179 G1 X122.586 Y113.153 E.23689 ;PATH_TASK id=1441 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X122.586 Y112.607 F21000 G1 F4179 G1 X127.801 Y107.393 E.23689 ;PATH_TASK id=1442 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X127.801 Y106.846 F21000 G1 F4179 G1 X122.586 Y112.061 E.23689 ;PATH_TASK id=1443 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X122.586 Y111.514 F21000 G1 F4179 G1 X127.801 Y106.3 E.23689 ;PATH_TASK id=1444 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X127.739 Y105.815 F21000 G1 F4179 G1 X122.586 Y110.968 E.23411 ;PATH_TASK id=1445 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X122.586 Y110.421 F21000 G1 F4179 G1 X127.193 Y105.815 E.20929 ;PATH_TASK id=1446 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X126.647 Y105.815 F21000 G1 F4179 G1 X122.586 Y109.875 E.18447 ;PATH_TASK id=1447 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X122.586 Y109.329 F21000 G1 F4179 G1 X126.1 Y105.815 E.15964 ;PATH_TASK id=1448 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X125.554 Y105.815 F21000 G1 F4179 G1 X122.586 Y108.782 E.13482 ;PATH_TASK id=1449 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X122.586 Y108.236 F21000 G1 F4179 G1 X125.007 Y105.815 E.10999 ;PATH_TASK id=1450 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X124.461 Y105.815 F21000 G1 F4179 G1 X122.586 Y107.689 E.08517 ;PATH_TASK id=1451 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X122.586 Y107.143 F21000 G1 F4179 G1 X123.915 Y105.815 E.06035 ;PATH_TASK id=1452 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X123.368 Y105.815 F21000 G1 F4179 G1 X122.586 Y106.597 E.03552 ;PATH_TASK id=1453 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.4 F720 G1 X118.699 Y106.407 Z3.4 F21000 G1 Z2.8 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F4179 G1 X116.699 Y106.407 E.0677 G1 X116.69 Y106.891 E.01641 G1 X117.746 Y107.948 E.05056 G1 X119.459 Y107.914 E.05797 G1 X119.459 Y112.059 E.1403 G1 X117.746 Y112.093 E.05797 G1 X116.69 Y111.036 E.05056 G1 X116.73 Y108.964 E.07017 G1 X115.674 Y107.907 E.05056 G1 X113.601 Y107.948 E.07017 G1 X112.545 Y106.891 E.05056 G1 X112.554 Y106.407 E.01641 G1 X110.595 Y106.354 E.06635 ;PATH_TASK id=1454 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.4 F720 G1 X110.592 Y113.597 Z3.4 F21000 G1 Z2.8 F720 G1 E.7 F1500 G1 F4179 G1 X112.576 Y113.593 E.06713 G1 X112.585 Y113.109 E.01641 G1 X111.529 Y112.052 E.05056 G1 X109.456 Y112.093 E.07017 G1 X108.4 Y111.036 E.05056 G1 X108.44 Y108.964 E.07017 G1 X107.384 Y107.907 E.05056 G1 X105.311 Y107.948 E.07017 G1 X104.255 Y106.891 E.05056 G1 X104.266 Y106.293 E.02027 G1 X108.411 Y106.333 E.14028 G1 X108.4 Y106.891 E.01891 G1 X109.456 Y107.948 E.05056 G1 X111.529 Y107.907 E.07017 G1 X112.585 Y108.964 E.05056 G1 X112.545 Y111.036 E.07017 G1 X113.601 Y112.093 E.05056 G1 X115.674 Y112.052 E.07017 M73 P91 R3 G1 X116.73 Y113.109 E.05056 G1 X116.721 Y113.593 E.01641 G1 X118.721 Y113.593 E.0677 ;PATH_TASK id=1455 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.4 F720 G1 X98.141 Y113.593 Z3.4 F21000 G1 Z2.8 F720 G1 E.7 F1500 G1 F4179 G1 X100.141 Y113.593 E.0677 G1 X100.15 Y113.109 E.01641 G1 X99.094 Y112.052 E.05056 G1 X97.5 Y112.083 E.05397 G1 X97.5 Y107.938 E.1403 G1 X99.094 Y107.907 E.05397 G1 X100.15 Y108.964 E.05056 G1 X100.11 Y111.036 E.07017 G1 X101.166 Y112.093 E.05056 G1 X103.239 Y112.052 E.07017 G1 X104.295 Y113.109 E.05056 G1 X104.286 Y113.593 E.01641 G1 X108.431 Y113.593 E.1403 G1 X108.44 Y113.109 E.01641 G1 X107.384 Y112.052 E.05056 G1 X105.311 Y112.093 E.07017 G1 X104.255 Y111.036 E.05056 G1 X104.295 Y108.964 E.07017 G1 X103.239 Y107.907 E.05056 G1 X101.166 Y107.948 E.07017 G1 X100.11 Y106.891 E.05056 G1 X100.122 Y106.253 E.02162 G1 X98.122 Y106.233 E.0677 ;PATH_TASK id=1456 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X97.44 Y105.94 F21000 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.384919 G1 F4179 G1 X112.16 Y106.011 E.41861 G1 X112.267 Y106.03 E.00307 G1 X119.622 Y106.03 E.20917 ;PATH_TASK id=1457 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.4 F720 G1 X97.56 Y113.94 Z3.4 F21000 G1 Z2.8 F720 G1 E.7 F1500 ;WIDTH:0.433473 G1 F4179 G1 X97.631 Y113.955 E.00238 ;PATH_TASK id=1458 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 ;WIDTH:0.389023 G1 X97.703 Y113.97 E.00211 G1 X110.22 Y113.97 E.36022 G1 X112.171 Y113.979 E.05615 G1 X112.25 Y113.97 E.00228 G1 X119.652 Y113.97 E.21303 ;PATH_TASK id=1459 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.4 F720 G1 X121.115 Y112.69 Z3.4 F21000 G1 Z2.8 F720 G1 E.7 F1500 ;WIDTH:0.505948 G1 F4179 G1 X121.115 Y107.35 E.20561 ;PATH_TASK id=1460 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X121.55 Y106.875 F21000 ;WIDTH:0.449999 G1 F4179 G1 X120.68 Y106.875 E.02945 G1 X120.68 Y113.125 E.21157 G1 X121.55 Y113.125 E.02945 G1 X121.55 Y106.915 E.21022 ;PATH_TASK id=1461 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X121.957 Y106.468 F21000 G1 F4179 G1 X120.273 Y106.468 E.05701 G1 X120.273 Y113.532 E.23913 G1 X121.957 Y113.532 E.05701 G1 X121.957 Y106.508 E.23777 ;PATH_TASK id=1462 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 G1 X122.364 Y106.061 F21000 ;WIDTH:0.448997 G1 F4179 G1 X120.008 Y106.06 E.07955 ;PATH_TASK id=1463 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 ;WIDTH:0.433234 G1 X119.835 Y106.045 E.00564 ;PATH_TASK id=1464 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 ;WIDTH:0.412646 G1 X119.662 Y106.03 E.00534 G1 X119.865 Y106.203 E.00819 ;PATH_TASK id=1465 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000 ;WIDTH:0.44877 G1 X119.866 Y112.69 E.21892 G1 X119.863 Y113.797 E.03735 G1 X119.718 Y113.943 E.00695 G3 X122.364 Y113.939 I2.022 J495.719 E.08931 G1 X122.364 Y106.101 E.26453 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:3 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;3 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;3 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1466 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 M486 S0 G1 Z3.6 F720 G1 X123.384 Y114.346 Z3.6 F21000 G1 Z3 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F3592 G1 X97.154 Y114.346 E.88786 G1 X97.154 Y105.654 E.29424 G1 X123.384 Y105.654 E.88786 G1 X123.384 Y114.306 E.29289 ;PATH_TASK id=1467 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 M204 T3000 G1 X123.426 Y114.306 F21000 G1 X123.427 Y114.389 G1 X123.427 Y114.389 G1 X123.812 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F3592 G1 X96.725 Y114.775 E.91687 G1 X96.725 Y105.225 E.32326 G1 X123.812 Y105.225 E.91687 G1 X123.812 Y114.735 E.3219 ;PATH_TASK id=1468 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z3.6 F720 G1 X123.427 Y114.389 Z3.6 F21000 G1 X123.427 Y114.389 G1 X123.426 Y106.607 G1 X123.222 Y106.607 G1 Z3 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.433861 G1 F3592 G1 X122.431 Y105.815 E.03639 ;PATH_TASK id=1469 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X121.878 Y105.815 F21000 G1 F3592 G1 X123.222 Y107.159 E.06181 ;PATH_TASK id=1470 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X123.222 Y107.712 F21000 G1 F3592 G1 X121.325 Y105.815 E.08723 ;PATH_TASK id=1471 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X121.163 Y106.206 F21000 G1 F3592 G1 X123.222 Y108.265 E.09465 ;PATH_TASK id=1472 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X123.222 Y108.818 F21000 G1 F3592 G1 X121.163 Y106.759 E.09465 ;PATH_TASK id=1473 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X121.163 Y107.312 F21000 G1 F3592 G1 X123.222 Y109.371 E.09465 ;PATH_TASK id=1474 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X123.222 Y109.924 F21000 G1 F3592 G1 X121.163 Y107.865 E.09465 ;PATH_TASK id=1475 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X121.163 Y108.418 F21000 G1 F3592 G1 X123.222 Y110.477 E.09465 ;PATH_TASK id=1476 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X123.222 Y111.03 F21000 G1 F3592 G1 X121.163 Y108.971 E.09465 ;PATH_TASK id=1477 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X121.163 Y109.523 F21000 G1 F3592 G1 X123.222 Y111.582 E.09465 ;PATH_TASK id=1478 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X123.222 Y112.135 F21000 G1 F3592 G1 X121.163 Y110.076 E.09465 ;PATH_TASK id=1479 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X121.163 Y110.629 F21000 G1 F3592 G1 X123.222 Y112.688 E.09465 ;PATH_TASK id=1480 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X123.222 Y113.241 F21000 G1 F3592 G1 X121.163 Y111.182 E.09465 ;PATH_TASK id=1481 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X121.163 Y111.735 F21000 G1 F3592 G1 X123.222 Y113.794 E.09465 ;PATH_TASK id=1482 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X123.061 Y114.185 F21000 G1 F3592 G1 X121.163 Y112.288 E.08722 ;PATH_TASK id=1483 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X121.163 Y112.841 F21000 G1 F3592 G1 X122.508 Y114.185 E.06181 ;PATH_TASK id=1484 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 X121.955 Y114.185 F21000 G1 F3592 G1 X121.163 Y113.394 E.03639 ;PATH_TASK id=1485 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.6 F720 G1 X120.943 Y106.059 Z3.6 F21000 G1 Z3 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.446624 G1 F3592 G1 X120.685 Y106.059 E.00864 G1 X120.539 Y106.205 E.00694 G1 X120.539 Y113.795 E.25477 G1 X120.685 Y113.941 E.00694 G1 X120.943 Y113.941 E.00864 G1 X120.943 Y106.099 E.26325 ;PATH_TASK id=1486 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.6 F720 G1 X111.971 Y109.49 Z3.6 F21000 G1 Z3 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F3592 G1 X111.943 Y110.951 E.04948 G1 X112.246 Y111.396 E.01822 G1 X111.736 Y111.906 E.02441 G1 X111.045 Y112.094 E.02425 G1 X109.456 Y112.032 E.05381 G1 X108.379 Y113.109 E.05156 G1 X108.397 Y113.576 E.01582 G1 X104.251 Y113.536 E.14036 G1 X104.234 Y113.109 E.01446 G1 X105.311 Y112.032 E.05156 G1 X107.384 Y112.113 E.07021 G1 X108.461 Y111.036 E.05156 G1 X108.379 Y108.964 E.07021 G1 X109.456 Y107.887 E.05156 G1 X111.436 Y107.965 E.06705 G1 X111.569 Y107.929 E.00466 G1 X112.243 Y107.254 E.03228 G1 X111.941 Y106.916 E.01534 G1 X111.951 Y106.367 E.0186 G1 X108.439 Y106.333 E.1189 G1 X108.461 Y106.891 E.01891 G1 X107.384 Y107.968 E.05156 G1 X105.311 Y107.887 E.07021 G1 X104.234 Y108.964 E.05156 G1 X104.316 Y111.036 E.07021 G1 X103.239 Y112.113 E.05156 G1 X101.166 Y112.032 E.07021 G1 X100.089 Y113.109 E.05156 G1 X100.104 Y113.496 E.01311 G1 X97.5 Y113.47 E.08817 G1 X97.5 Y112.05 E.04807 G1 X99.094 Y112.113 E.054 G1 X100.171 Y111.036 E.05156 G1 X100.089 Y108.964 E.07021 G1 X101.166 Y107.887 E.05156 G1 X103.239 Y107.968 E.07021 G1 X104.316 Y106.891 E.05156 G1 X104.292 Y106.293 E.02027 G1 X100.146 Y106.253 E.14036 G1 X100.171 Y106.891 E.02163 G1 X99.094 Y107.968 E.05156 G1 X97.5 Y107.905 E.054 G1 X97.5 Y106.227 E.05681 G1 X97.821 Y106.23 E.01089 ;PATH_TASK id=1487 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.6 F720 G1 X112.196 Y113.701 Z3.6 F21000 G1 Z3 F720 G1 E.7 F1500 M204 P1500 ;TYPE:Internal Bridge ;WIDTH:0.4 ;HEIGHT:0.4 G1 F3592 M106 S255 G1 X120.112 Y113.778 E.4136 G1 X120.112 Y113.328 E.02351 G1 X112.407 Y113.253 E.40257 G1 X112.411 Y113.055 E.01037 G1 X112.178 Y112.801 E.01801 G1 X120.112 Y112.878 E.41456 G1 X120.112 Y112.428 E.02351 G1 X111.748 Y112.347 E.43699 G1 X113.151 Y111.965 E.07597 G1 X113.114 Y111.91 E.00349 G1 X120.112 Y111.978 E.36564 G1 X120.112 Y111.528 E.02351 G1 X112.806 Y111.457 E.38175 G1 X112.497 Y111.004 E.02863 G1 X120.112 Y111.078 E.39786 G1 X120.112 Y110.628 E.02351 G1 X112.379 Y110.553 E.40402 G1 X112.388 Y110.103 E.02351 G1 X120.112 Y110.178 E.40357 G1 X120.112 Y109.728 E.02351 G1 X112.397 Y109.653 E.40312 G1 X112.405 Y109.203 E.02351 G1 X120.112 Y109.278 E.40266 G1 X120.112 Y108.828 E.02351 G1 X112.218 Y108.751 E.41243 G1 X112.035 Y108.492 E.01658 G1 X111.842 Y108.298 E.01431 G1 X120.112 Y108.378 E.43211 G1 X120.112 Y107.928 E.02351 G1 X113.362 Y107.862 E.3527 G1 X112.956 Y107.408 E.03181 G1 X120.112 Y107.478 E.3739 G1 X120.112 Y107.028 E.02351 G1 X112.55 Y106.955 E.39511 G1 X112.373 Y106.756 E.0139 G1 X112.377 Y106.503 E.01324 G1 X120.112 Y106.578 E.40412 G1 X120.112 Y106.128 E.02351 G1 X97.319 Y105.907 E1.19091 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:3.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;3.2 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;3.2 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1488 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 M486 S0 G1 Z3.8 F720 G1 X121.961 Y105.654 Z3.8 F21000 G1 Z3.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F3087 M106 S252 G1 X121.961 Y114.346 E.29424 G1 X97.154 Y114.346 E.83969 G1 X97.154 Y105.654 E.29424 G1 X121.921 Y105.654 E.83833 ;PATH_TASK id=1489 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 M204 T3000 G1 X121.921 Y105.611 F21000 G1 X122.003 Y105.611 G1 X122.389 Y105.225 M204 P3000 ;TYPE:Outer wall G1 F3087 G1 X122.389 Y114.775 E.32326 G1 X96.725 Y114.775 E.8687 G1 X96.725 Y105.225 E.32326 G1 X122.349 Y105.225 E.86734 ;PATH_TASK id=1490 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z3.8 F720 G1 X122.003 Y105.611 Z3.8 F21000 G1 X119.966 Y106.04 G1 X119.966 Y112.55 G1 X119.518 Y112.55 G1 Z3.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill G1 F3087 G1 X118.129 Y113.939 E.06651 G1 X119.518 Y113.939 E.04703 G1 X119.518 Y112.59 E.04568 ;PATH_TASK id=1491 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X119.136 Y113.488 F21000 ;WIDTH:0.449746 G1 F3087 G1 X119.086 Y113.488 E.00172 G1 X119.06 Y113.532 E.00172 G1 X119.086 Y113.576 E.00172 G1 X119.136 Y113.576 E.00172 G1 X119.142 Y113.567 E.00037 ;PATH_TASK id=1492 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.8 F720 G1 X117.596 Y114.184 Z3.8 F21000 G1 Z3.2 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F3087 G1 X119.518 Y112.262 E.09198 G1 X119.518 Y111.686 E.01949 G1 X117.204 Y114 E.11077 G1 X116.628 Y114 E.01949 G1 X119.518 Y111.111 E.13833 G1 X119.518 Y110.535 E.01949 G1 X116.052 Y114 E.16589 G1 X115.477 Y114 E.01949 G1 X119.518 Y109.959 E.19345 G1 X119.518 Y109.384 E.01949 G1 X114.901 Y114 E.22101 G1 X114.34 Y114 E.019 G1 X114.34 Y113.986 E.00049 G1 X119.518 Y108.808 E.24787 G1 X119.518 Y108.232 E.01949 G1 X114.34 Y113.41 E.24787 G1 X114.34 Y112.835 E.01949 G1 X119.518 Y107.656 E.24787 G1 X119.518 Y107.081 E.01949 G1 X114.34 Y112.259 E.24787 G1 X114.34 Y111.683 E.01949 G1 X119.518 Y106.505 E.24787 G1 X119.518 Y106 E.01711 G1 X119.448 Y106 E.00237 G1 X114.34 Y111.107 E.24451 G1 X114.34 Y110.532 E.01949 G1 X118.872 Y106 E.21696 G1 X118.296 Y106 E.01949 G1 X114.34 Y109.956 E.1894 G1 X114.34 Y109.38 E.01949 G1 X117.721 Y106 E.16184 G1 X117.145 Y106 E.01949 G1 X114.34 Y108.805 E.13428 G1 X114.34 Y108.229 E.01949 G1 X116.569 Y106 E.10672 G1 X115.994 Y106 E.01949 G1 X114.34 Y107.653 E.07916 G1 X114.34 Y107.078 E.01949 G1 X115.601 Y105.816 E.06038 ;PATH_TASK id=1493 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X114.416 Y106.052 F21000 ;WIDTH:0.53993 G1 F3087 G1 X114.354 Y106.052 E.00257 G1 X114.323 Y106.106 E.00257 G1 X114.354 Y106.159 E.00257 G1 X114.416 Y106.159 E.00257 G1 X114.427 Y106.14 E.00091 ;PATH_TASK id=1494 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.8 F720 G1 X113.933 Y110.285 Z3.8 F21000 G1 Z3.2 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F3087 G1 X113.933 Y112.285 E.0677 G1 X113.601 Y112.385 E.01172 G1 X112.878 Y113.109 E.03464 G1 X112.609 Y114 E.03153 G1 X108.464 Y114 E.1403 G1 X108.733 Y113.109 E.03153 G1 X109.456 Y112.385 E.03464 G1 X111.529 Y111.76 E.07327 G1 X112.252 Y111.036 E.03464 G1 X112.878 Y108.964 E.07327 G1 X113.601 Y108.24 E.03464 G1 X113.933 Y108.14 E.01172 G1 X113.933 Y106 E.07245 G1 X112.521 Y106 E.04777 G1 X112.252 Y106.891 E.03153 G1 X111.529 Y107.615 E.03464 G1 X109.456 Y108.24 E.07327 G1 X108.733 Y108.964 E.03464 G1 X108.107 Y111.036 E.07327 G1 X107.384 Y111.76 E.03464 G1 X105.311 Y112.385 E.07327 G1 X104.588 Y113.109 E.03464 G1 X104.319 Y114 E.03153 G1 X100.173 Y114 E.1403 G1 X100.443 Y113.109 E.03153 G1 X101.166 Y112.385 E.03464 G1 X103.239 Y111.76 E.07327 G1 X103.962 Y111.036 E.03464 G1 X104.588 Y108.964 E.07327 G1 X105.311 Y108.24 E.03464 G1 X107.384 Y107.615 E.07327 G1 X108.107 Y106.891 E.03464 G1 X108.376 Y106 E.03153 G1 X104.231 Y106 E.1403 G1 X103.962 Y106.891 E.03153 G1 X103.239 Y107.615 E.03464 G1 X101.166 Y108.24 E.07327 G1 X100.443 Y108.964 E.03464 G1 X99.817 Y111.036 E.07327 G1 X99.094 Y111.76 E.03464 G1 X97.5 Y112.241 E.05636 G1 X97.5 Y108.096 E.1403 G1 X99.094 Y107.615 E.05636 G1 X99.817 Y106.891 E.03464 G1 X100.086 Y106 E.03153 G1 X98.086 Y106 E.0677 ;PATH_TASK id=1495 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z3.8 F720 G1 X121.799 Y113.393 Z3.8 F21000 G1 Z3.2 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.433862 G1 F3087 G1 X121.008 Y114.185 E.03639 ;PATH_TASK id=1496 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X120.455 Y114.185 F21000 G1 F3087 G1 X121.799 Y112.841 E.06181 ;PATH_TASK id=1497 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X121.799 Y112.288 F21000 G1 F3087 G1 X119.902 Y114.185 E.08723 ;PATH_TASK id=1498 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X119.74 Y113.794 F21000 G1 F3087 G1 X121.799 Y111.735 E.09465 ;PATH_TASK id=1499 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X121.799 Y111.182 F21000 G1 F3087 G1 X119.74 Y113.241 E.09465 ;PATH_TASK id=1500 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X119.74 Y112.688 F21000 G1 F3087 G1 X121.799 Y110.629 E.09465 ;PATH_TASK id=1501 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X121.799 Y110.076 F21000 G1 F3087 G1 X119.74 Y112.135 E.09465 ;PATH_TASK id=1502 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X119.74 Y111.582 F21000 G1 F3087 G1 X121.799 Y109.523 E.09465 ;PATH_TASK id=1503 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X121.799 Y108.97 F21000 G1 F3087 G1 X119.74 Y111.029 E.09465 ;PATH_TASK id=1504 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X119.74 Y110.477 F21000 G1 F3087 G1 X121.799 Y108.418 E.09465 ;PATH_TASK id=1505 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X121.799 Y107.865 F21000 G1 F3087 G1 X119.74 Y109.924 E.09465 ;PATH_TASK id=1506 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X119.74 Y109.371 F21000 G1 F3087 G1 X121.799 Y107.312 E.09465 ;PATH_TASK id=1507 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X121.799 Y106.759 F21000 G1 F3087 G1 X119.74 Y108.818 E.09465 ;PATH_TASK id=1508 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X119.74 Y108.265 F21000 G1 F3087 G1 X121.799 Y106.206 E.09465 ;PATH_TASK id=1509 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X121.638 Y105.815 F21000 G1 F3087 G1 X119.74 Y107.712 E.08722 ;PATH_TASK id=1510 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X119.74 Y107.159 F21000 G1 F3087 G1 X121.085 Y105.815 E.06181 ;PATH_TASK id=1511 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000 G1 X120.532 Y105.815 F21000 G1 F3087 G1 X119.74 Y106.606 E.03639 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:3.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;3.4 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;3.4 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1512 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 M486 S0 G1 Z4 F720 G1 X120.538 Y114.346 Z4 F21000 M73 P92 R3 G1 Z3.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F2952 G1 X97.154 Y114.346 E.79152 G1 X97.154 Y105.654 E.29424 G1 X120.538 Y105.654 E.79152 G1 X120.538 Y114.306 E.29289 ;PATH_TASK id=1513 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 M204 T3000 G1 X120.58 Y114.306 F21000 G1 X120.58 Y114.389 G1 X120.58 Y114.389 G1 X120.966 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F2952 G1 X96.725 Y114.775 E.82053 G1 X96.725 Y105.225 E.32326 G1 X120.966 Y105.225 E.82053 G1 X120.966 Y114.735 E.3219 ;PATH_TASK id=1514 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z4 F720 G1 X120.58 Y114.389 Z4 F21000 G1 X113.282 Y114.389 G1 X113.282 Y113.841 G1 Z3.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.53993 G1 F2952 G1 X113.219 Y113.841 E.00257 G1 X113.188 Y113.894 E.00257 G1 X113.219 Y113.948 E.00257 G1 X113.282 Y113.948 E.00257 G1 X113.293 Y113.929 E.00091 ;PATH_TASK id=1515 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4 F720 G1 X110.513 Y114 Z4 F21000 G1 Z3.4 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F2952 G1 X108.513 Y114 E.0677 G3 X109.456 Y112.739 I3.374 J1.539 E.05373 G1 X111.529 Y111.406 E.0834 G1 X111.899 Y111.036 E.01772 G1 X112.798 Y109.637 E.05632 G1 X112.798 Y106 E.12311 G1 X112.472 Y106 E.01105 G3 X111.529 Y107.261 I-3.374 J-1.539 E.05373 G1 X109.456 Y108.594 E.0834 G1 X109.086 Y108.964 E.01772 G1 X107.754 Y111.036 E.0834 G1 X107.384 Y111.406 E.01772 G1 X105.311 Y112.739 E.0834 G2 X104.368 Y114 I2.431 J2.801 E.05373 G1 X100.223 Y114 E.1403 G3 X101.166 Y112.739 I3.374 J1.539 E.05373 G1 X103.239 Y111.406 E.0834 G1 X103.609 Y111.036 E.01772 G1 X104.941 Y108.964 E.0834 G1 X105.311 Y108.594 E.01772 G1 X107.384 Y107.261 E.0834 G2 X108.327 Y106 I-2.431 J-2.801 E.05373 G1 X104.182 Y106 E.1403 G3 X103.239 Y107.261 I-3.374 J-1.539 E.05373 G1 X101.166 Y108.594 E.0834 G1 X100.796 Y108.964 E.01772 G1 X99.464 Y111.036 E.0834 G1 X99.094 Y111.406 E.01772 G1 X97.5 Y112.431 E.06415 G1 X97.5 Y108.286 E.1403 G1 X99.094 Y107.261 E.06415 G2 X100.037 Y106 I-2.431 J-2.801 E.05373 G1 X98.037 Y106 E.0677 ;PATH_TASK id=1516 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4 F720 G1 X116.462 Y105.816 Z4 F21000 G1 Z3.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.449999 G1 F2952 G1 X118.095 Y107.449 E.07816 G1 X118.095 Y108.025 E.01949 G1 X116.07 Y106 E.09695 G1 X115.494 Y106 E.01949 G1 X118.095 Y108.601 E.12451 G1 X118.095 Y109.176 E.01949 G1 X114.918 Y106 E.15206 G1 X114.342 Y106 E.01949 G1 X118.095 Y109.752 E.17962 G1 X118.095 Y110.328 E.01949 G1 X113.767 Y106 E.20718 G1 X113.206 Y106 E.019 G1 X113.206 Y106.014 E.00049 G1 X118.095 Y110.903 E.23405 G1 X118.095 Y111.479 E.01949 G1 X113.206 Y106.59 E.23405 G1 X113.206 Y107.165 E.01949 G1 X118.095 Y112.055 E.23405 M73 P92 R2 G1 X118.095 Y112.63 E.01949 G1 X113.206 Y107.741 E.23405 G1 X113.206 Y108.317 E.01949 G1 X118.095 Y113.206 E.23405 G1 X118.095 Y113.782 E.01949 G1 X113.206 Y108.893 E.23405 G1 X113.206 Y109.468 E.01949 G1 X117.738 Y114 E.21696 G1 X117.162 Y114 E.01949 G1 X113.206 Y110.044 E.1894 G1 X113.206 Y110.62 E.01949 G1 X116.586 Y114 E.16184 G1 X116.011 Y114 E.01949 G1 X113.206 Y111.195 E.13428 G1 X113.206 Y111.771 E.01949 G1 X115.435 Y114 E.10672 G1 X114.859 Y114 E.01949 G1 X113.206 Y112.347 E.07916 G1 X113.206 Y112.922 E.01949 G1 X114.467 Y114.184 E.06038 ;PATH_TASK id=1517 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4 F720 G1 X118.035 Y107.018 Z4 F21000 G1 Z3.4 F720 G1 E.7 F1500 ;WIDTH:0.56882 G1 F2952 G1 X118.035 Y106.12 E.03926 G1 X117.138 Y106.12 E.03926 G1 X118.007 Y106.99 E.05377 ;PATH_TASK id=1518 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4 F720 G1 X120.376 Y106.607 Z4 F21000 G1 Z3.4 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.433862 G1 F2952 G1 X119.585 Y105.815 E.03639 ;PATH_TASK id=1519 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X119.032 Y105.815 F21000 G1 F2952 G1 X120.376 Y107.159 E.06181 ;PATH_TASK id=1520 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X120.376 Y107.712 F21000 G1 F2952 G1 X118.479 Y105.815 E.08723 ;PATH_TASK id=1521 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X118.317 Y106.206 F21000 G1 F2952 G1 X120.376 Y108.265 E.09465 ;PATH_TASK id=1522 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X120.376 Y108.818 F21000 G1 F2952 G1 X118.317 Y106.759 E.09465 ;PATH_TASK id=1523 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X118.317 Y107.312 F21000 G1 F2952 G1 X120.376 Y109.371 E.09465 ;PATH_TASK id=1524 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X120.376 Y109.924 F21000 G1 F2952 G1 X118.317 Y107.865 E.09465 ;PATH_TASK id=1525 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X118.317 Y108.418 F21000 G1 F2952 G1 X120.376 Y110.477 E.09465 ;PATH_TASK id=1526 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X120.376 Y111.03 F21000 G1 F2952 G1 X118.317 Y108.971 E.09465 ;PATH_TASK id=1527 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X118.317 Y109.523 F21000 G1 F2952 G1 X120.376 Y111.582 E.09465 ;PATH_TASK id=1528 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X120.376 Y112.135 F21000 G1 F2952 G1 X118.317 Y110.076 E.09465 ;PATH_TASK id=1529 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X118.317 Y110.629 F21000 G1 F2952 G1 X120.376 Y112.688 E.09465 ;PATH_TASK id=1530 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X120.376 Y113.241 F21000 G1 F2952 G1 X118.317 Y111.182 E.09465 ;PATH_TASK id=1531 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X118.317 Y111.735 F21000 G1 F2952 G1 X120.376 Y113.794 E.09465 ;PATH_TASK id=1532 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X120.215 Y114.185 F21000 G1 F2952 G1 X118.317 Y112.288 E.08722 ;PATH_TASK id=1533 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X118.317 Y112.841 F21000 G1 F2952 G1 X119.662 Y114.185 E.06181 ;PATH_TASK id=1534 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000 G1 X119.109 Y114.185 F21000 G1 F2952 G1 X118.317 Y113.394 E.03639 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:3.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;3.6 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;3.6 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1535 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 M486 S0 G1 Z4.2 F720 G1 X119.114 Y114.346 Z4.2 F21000 G1 Z3.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F2750 G1 X97.154 Y114.346 E.74335 G1 X97.154 Y105.654 E.29424 G1 X119.114 Y105.654 E.74335 G1 X119.114 Y114.306 E.29289 ;PATH_TASK id=1536 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 M204 T3000 G1 X119.157 Y114.306 F21000 G1 X119.157 Y114.389 G1 X119.157 Y114.389 G1 X119.543 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F2750 G1 X96.725 Y114.775 E.77236 G1 X96.725 Y105.225 E.32326 G1 X119.543 Y105.225 E.77236 G1 X119.543 Y114.735 E.3219 ;PATH_TASK id=1537 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z4.2 F720 G1 X119.157 Y114.389 Z4.2 F21000 G1 X118.182 Y114.389 G1 X118.182 Y114.185 G1 Z3.6 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.423998 G1 F2750 G1 X118.953 Y113.414 E.03454 ;PATH_TASK id=1538 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X118.953 Y112.875 F21000 G1 F2750 G1 X117.643 Y114.185 E.05869 ;PATH_TASK id=1539 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X117.105 Y114.185 F21000 G1 F2750 G1 X118.953 Y112.337 E.08284 ;PATH_TASK id=1540 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X118.953 Y111.798 F21000 G1 F2750 G1 X116.566 Y114.185 E.10699 ;PATH_TASK id=1541 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X116.027 Y114.185 F21000 G1 F2750 G1 X118.953 Y111.259 E.13114 ;PATH_TASK id=1542 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X118.953 Y110.72 F21000 G1 F2750 G1 X115.488 Y114.185 E.15529 ;PATH_TASK id=1543 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X114.949 Y114.185 F21000 G1 F2750 G1 X118.953 Y110.181 E.17944 ;PATH_TASK id=1544 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X118.953 Y109.642 F21000 G1 F2750 G1 X114.41 Y114.185 E.20359 ;PATH_TASK id=1545 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X113.926 Y114.13 F21000 G1 F2750 G1 X118.953 Y109.103 E.22529 ;PATH_TASK id=1546 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X118.953 Y108.564 F21000 G1 F2750 G1 X113.926 Y113.592 E.22529 ;PATH_TASK id=1547 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X113.926 Y113.053 F21000 G1 F2750 G1 X118.953 Y108.025 E.22529 ;PATH_TASK id=1548 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X118.953 Y107.486 F21000 G1 F2750 G1 X113.926 Y112.514 E.22529 ;PATH_TASK id=1549 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X113.926 Y111.975 F21000 G1 F2750 G1 X118.953 Y106.947 E.22529 ;PATH_TASK id=1550 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X118.953 Y106.408 F21000 G1 F2750 G1 X113.926 Y111.436 E.22529 ;PATH_TASK id=1551 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X113.926 Y110.897 F21000 G1 F2750 G1 X118.953 Y105.869 E.22529 ;PATH_TASK id=1552 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X118.469 Y105.815 F21000 G1 F2750 G1 X113.926 Y110.358 E.20359 ;PATH_TASK id=1553 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X113.926 Y109.819 F21000 G1 F2750 G1 X117.93 Y105.815 E.17944 ;PATH_TASK id=1554 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X117.391 Y105.815 F21000 G1 F2750 G1 X113.926 Y109.28 E.15528 ;PATH_TASK id=1555 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X113.926 Y108.741 F21000 G1 F2750 G1 X116.852 Y105.815 E.13113 ;PATH_TASK id=1556 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X116.313 Y105.815 F21000 G1 F2750 G1 X113.926 Y108.202 E.10698 ;PATH_TASK id=1557 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X113.926 Y107.663 F21000 G1 F2750 G1 X115.774 Y105.815 E.08283 ;PATH_TASK id=1558 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X115.235 Y105.815 F21000 G1 F2750 G1 X113.926 Y107.124 E.05868 ;PATH_TASK id=1559 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X113.926 Y106.585 F21000 G1 F2750 G1 X114.696 Y105.815 E.03453 ;PATH_TASK id=1560 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4.2 F720 G1 X112.887 Y113.123 Z4.2 F21000 G1 Z3.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.453636 G1 F2750 G1 X112.887 Y106.917 E.21197 ;PATH_TASK id=1561 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X113.296 Y106.468 F21000 ;WIDTH:0.449999 G1 F2750 G1 X112.478 Y106.468 E.02768 G1 X112.478 Y113.532 E.23913 G1 X113.296 Y113.532 E.02768 G1 X113.296 Y106.508 E.23777 ;PATH_TASK id=1562 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 X113.703 Y106.061 F21000 G1 F2750 G1 X112.071 Y106.061 E.05524 G1 X112.071 Y113.939 E.26669 G1 X113.703 Y113.939 E.05524 G1 X113.703 Y106.101 E.26533 ;PATH_TASK id=1563 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4.2 F720 G1 X110.564 Y114 Z4.2 F21000 G1 Z3.6 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F2750 G1 X108.564 Y114 E.0677 G1 X111.664 Y110.901 E.14838 G1 X111.664 Y106.756 E.1403 G1 X104.419 Y114 E.3468 G1 X100.274 Y114 E.1403 G1 X108.275 Y106 E.383 G1 X104.13 Y106 E.1403 G1 X97.5 Y112.63 E.31741 G1 X97.5 Y108.485 E.1403 G1 X99.985 Y106 E.11899 G1 X97.985 Y106 E.0677 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:3.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;3.8 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;3.8 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1564 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 M486 S0 G1 Z4.4 F720 G1 X114.723 Y114.346 Z4.4 F21000 G1 Z3.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F1945 G1 X97.154 Y114.346 E.5947 G1 X97.154 Y105.654 E.29424 G1 X114.723 Y105.654 E.5947 G1 X114.723 Y114.306 E.29289 ;PATH_TASK id=1565 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 M204 T3000 G1 X114.766 Y114.306 F21000 G1 X114.766 Y114.389 G1 X114.766 Y114.389 G1 X115.151 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F1945 G1 X96.725 Y114.775 E.62371 G1 X96.725 Y105.225 E.32326 G1 X115.151 Y105.225 E.62371 G1 X115.151 Y114.735 E.3219 ;PATH_TASK id=1566 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z4.4 F720 G1 X114.766 Y114.389 Z4.4 F21000 G1 X113.017 Y113.96 G1 X111.753 Y113.123 G1 Z3.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.453638 G1 F1945 G1 X111.753 Y106.917 E.21197 ;PATH_TASK id=1567 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X112.162 Y106.468 F21000 ;WIDTH:0.449999 G1 F1945 G1 X111.344 Y106.468 E.02768 G1 X111.344 Y113.532 E.23913 G1 X112.162 Y113.532 E.02768 G1 X112.162 Y106.508 E.23777 ;PATH_TASK id=1568 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X112.569 Y106.061 F21000 G1 F1945 G1 X110.937 Y106.061 E.05524 G1 X110.937 Y113.939 E.26669 M73 P93 R2 G1 X112.569 Y113.939 E.05524 G1 X112.569 Y106.101 E.26533 ;PATH_TASK id=1569 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X113.793 Y105.815 F21000 M204 P2000 ;TYPE:Top surface ;WIDTH:0.423113 G1 F1945 G1 X114.562 Y106.584 E.03437 ;PATH_TASK id=1570 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X114.562 Y107.121 F21000 G1 F1945 G1 X113.255 Y105.815 E.05841 ;PATH_TASK id=1571 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X112.791 Y105.889 F21000 G1 F1945 G1 X114.562 Y107.659 E.07914 ;PATH_TASK id=1572 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X114.562 Y108.197 F21000 G1 F1945 G1 X112.791 Y106.427 E.07914 ;PATH_TASK id=1573 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X112.791 Y106.964 F21000 G1 F1945 G1 X114.562 Y108.734 E.07914 ;PATH_TASK id=1574 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X114.562 Y109.272 F21000 G1 F1945 G1 X112.791 Y107.502 E.07914 ;PATH_TASK id=1575 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X112.791 Y108.04 F21000 G1 F1945 G1 X114.562 Y109.81 E.07914 ;PATH_TASK id=1576 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X114.562 Y110.347 F21000 G1 F1945 G1 X112.791 Y108.577 E.07914 ;PATH_TASK id=1577 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X112.791 Y109.115 F21000 G1 F1945 G1 X114.562 Y110.885 E.07914 ;PATH_TASK id=1578 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X114.562 Y111.423 F21000 G1 F1945 G1 X112.791 Y109.653 E.07914 ;PATH_TASK id=1579 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X112.791 Y110.19 F21000 G1 F1945 G1 X114.562 Y111.96 E.07914 ;PATH_TASK id=1580 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X114.562 Y112.498 F21000 G1 F1945 G1 X112.791 Y110.728 E.07914 ;PATH_TASK id=1581 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X112.791 Y111.266 F21000 G1 F1945 G1 X114.562 Y113.036 E.07914 ;PATH_TASK id=1582 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X114.562 Y113.573 F21000 G1 F1945 G1 X112.791 Y111.803 E.07914 ;PATH_TASK id=1583 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X112.791 Y112.341 F21000 G1 F1945 G1 X114.562 Y114.111 E.07914 ;PATH_TASK id=1584 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X114.098 Y114.185 F21000 G1 F1945 G1 X112.791 Y112.879 E.05841 ;PATH_TASK id=1585 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 X112.791 Y113.416 F21000 G1 F1945 G1 X113.56 Y114.185 E.03437 ;PATH_TASK id=1586 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4.4 F720 G1 X106.564 Y114 Z4.4 F21000 G1 Z3.8 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F1945 G1 X108.564 Y114 E.0677 G1 X110.53 Y112.035 E.09409 G1 X110.53 Y107.89 E.1403 G1 X104.419 Y114 E.29251 G1 X100.274 Y114 E.1403 G1 X108.275 Y106 E.383 G1 X104.13 Y106 E.1403 G1 X97.5 Y112.63 E.31741 G1 X97.5 Y108.485 E.1403 G1 X99.985 Y106 E.11899 G1 X97.985 Y106 E.0677 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;4 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;4 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1587 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 M486 S0 G1 Z4.6 F720 G1 X113.589 Y114.346 Z4.6 F21000 G1 Z4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F2148 G1 X97.154 Y114.346 E.55631 G1 X97.154 Y105.654 E.29424 G1 X113.589 Y105.654 E.55631 G1 X113.589 Y114.306 E.29289 ;PATH_TASK id=1588 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 M204 T3000 G1 X113.631 Y114.306 F21000 G1 X113.631 Y114.389 G1 X114.017 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F2148 G1 X96.725 Y114.775 E.58532 G1 X96.725 Y105.225 E.32326 G1 X114.017 Y105.225 E.58532 G1 X114.017 Y114.735 E.3219 ;PATH_TASK id=1589 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z4.6 F720 G1 X113.631 Y114.389 Z4.6 F21000 G1 X112.658 Y114.389 G1 X112.658 Y114.185 G1 Z4 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.423113 G1 F2148 G1 X113.427 Y113.416 E.03437 ;PATH_TASK id=1590 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X113.427 Y112.879 F21000 G1 F2148 G1 X112.121 Y114.185 E.05841 ;PATH_TASK id=1591 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X111.657 Y114.111 F21000 G1 F2148 G1 X113.427 Y112.341 E.07914 ;PATH_TASK id=1592 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X113.427 Y111.803 F21000 G1 F2148 G1 X111.657 Y113.573 E.07914 ;PATH_TASK id=1593 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X111.657 Y113.036 F21000 G1 F2148 G1 X113.427 Y111.266 E.07914 ;PATH_TASK id=1594 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X113.427 Y110.728 F21000 G1 F2148 G1 X111.657 Y112.498 E.07914 ;PATH_TASK id=1595 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X111.657 Y111.96 F21000 G1 F2148 G1 X113.427 Y110.19 E.07914 ;PATH_TASK id=1596 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X113.427 Y109.653 F21000 G1 F2148 G1 X111.657 Y111.423 E.07914 ;PATH_TASK id=1597 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X111.657 Y110.885 F21000 G1 F2148 G1 X113.427 Y109.115 E.07914 ;PATH_TASK id=1598 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X113.427 Y108.577 F21000 G1 F2148 G1 X111.657 Y110.347 E.07914 ;PATH_TASK id=1599 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X111.657 Y109.81 F21000 G1 F2148 G1 X113.427 Y108.04 E.07914 ;PATH_TASK id=1600 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X113.427 Y107.502 F21000 G1 F2148 G1 X111.657 Y109.272 E.07914 ;PATH_TASK id=1601 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X111.657 Y108.734 F21000 G1 F2148 G1 X113.427 Y106.964 E.07914 ;PATH_TASK id=1602 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X113.427 Y106.427 F21000 G1 F2148 G1 X111.657 Y108.197 E.07914 ;PATH_TASK id=1603 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X111.657 Y107.659 F21000 G1 F2148 G1 X113.427 Y105.889 E.07914 ;PATH_TASK id=1604 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X112.964 Y105.815 F21000 G1 F2148 G1 X111.657 Y107.121 E.05841 ;PATH_TASK id=1605 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X111.657 Y106.584 F21000 G1 F2148 G1 X112.426 Y105.815 E.03437 ;PATH_TASK id=1606 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4.6 F720 G1 X103.426 Y106.03 Z4.6 F21000 G1 Z4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.388948 G1 F2148 G1 X109.559 Y106.03 E.17647 ;PATH_TASK id=1607 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4.6 F720 G1 X111.435 Y106.061 Z4.6 F21000 G1 Z4 F720 G1 E.7 F1500 ;WIDTH:0.448997 G1 F2148 G1 X109.945 Y106.06 E.05029 ;PATH_TASK id=1608 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 ;WIDTH:0.433234 G1 X109.772 Y106.045 E.00564 ;PATH_TASK id=1609 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 ;WIDTH:0.412646 G1 X109.599 Y106.03 E.00534 G1 X109.802 Y106.203 E.00819 ;PATH_TASK id=1610 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 ;WIDTH:0.449648 G1 X109.803 Y113.123 E.23404 G1 X109.8 Y113.797 E.02278 ;PATH_TASK id=1611 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 ;WIDTH:0.430957 G1 X109.715 Y113.883 E.0039 ;PATH_TASK id=1612 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 ;WIDTH:0.419029 G1 X109.629 Y113.969 E.00378 G1 X110.619 Y113.939 E.03096 ;PATH_TASK id=1613 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 ;WIDTH:0.449999 G1 X111.435 Y113.939 E.02762 G1 X111.435 Y106.101 E.26533 ;PATH_TASK id=1614 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 X111.028 Y106.468 F21000 G1 F2148 G1 X110.21 Y106.468 E.02768 G1 X110.21 Y113.532 E.23913 G1 X111.028 Y113.532 E.02768 G1 X111.028 Y106.508 E.23777 ;PATH_TASK id=1615 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4.6 F720 G1 X110.619 Y113.123 Z4.6 F21000 G1 Z4 F720 G1 E.7 F1500 ;WIDTH:0.45366 G1 F2148 G1 X110.619 Y106.917 E.21198 ;PATH_TASK id=1616 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4.6 F720 G1 X105.185 Y113.97 Z4.6 F21000 G1 Z4 F720 G1 E.7 F1500 ;WIDTH:0.388942 G1 F2148 G1 X109.589 Y113.97 E.12671 ;PATH_TASK id=1617 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4.6 F720 G1 X109.396 Y111.169 Z4.6 F21000 G1 Z4 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F2148 G1 X109.396 Y113.169 E.0677 G1 X108.972 Y113.593 E.0203 G1 X104.827 Y113.593 E.1403 G1 X109.396 Y109.024 E.21872 G1 X109.396 Y106.407 E.0886 G1 X107.868 Y106.407 E.0517 G1 X100.274 Y114 E.36351 G1 X97.5 Y114 E.09393 G1 X97.5 Y112.63 E.04638 G1 X103.723 Y106.407 E.29792 G1 X103.106 Y106.407 E.0209 G1 X103.039 Y106 E.01396 G1 X99.985 Y106 E.10338 G1 X97.5 Y108.485 E.11899 G1 X97.5 Y106.485 E.0677 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:4.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;4.2 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;4.2 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1618 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 M486 S0 G1 Z4.8 F720 G1 X112.454 Y114.346 Z4.8 F21000 G1 Z4.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F2378 G1 X97.154 Y114.346 E.51791 G1 X97.154 Y105.654 E.29424 G1 X112.454 Y105.654 E.51791 G1 X112.454 Y114.306 E.29289 ;PATH_TASK id=1619 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 M204 T3000 G1 X112.497 Y114.306 F21000 G1 X112.497 Y114.389 G1 X112.497 Y114.389 G1 X112.883 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F2378 G1 X96.725 Y114.775 E.54692 G1 X96.725 Y105.225 E.32326 G1 X112.883 Y105.225 E.54692 G1 X112.883 Y114.735 E.3219 ;PATH_TASK id=1620 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z4.8 F720 G1 X112.497 Y114.389 Z4.8 F21000 G1 X110.389 Y114.389 G1 X110.389 Y113.831 G1 Z4.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F2378 G1 X110.389 Y106.209 E.21547 ;PATH_TASK id=1621 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X111.524 Y105.815 F21000 M204 P2000 ;TYPE:Top surface ;WIDTH:0.423113 G1 F2378 G1 X112.293 Y106.584 E.03437 ;PATH_TASK id=1622 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X112.293 Y107.121 F21000 G1 F2378 G1 X110.986 Y105.815 E.05841 ;PATH_TASK id=1623 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X110.523 Y105.889 F21000 G1 F2378 G1 X112.293 Y107.659 E.07914 ;PATH_TASK id=1624 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X112.293 Y108.197 F21000 G1 F2378 G1 X110.523 Y106.427 E.07914 ;PATH_TASK id=1625 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X110.523 Y106.964 F21000 G1 F2378 G1 X112.293 Y108.734 E.07914 ;PATH_TASK id=1626 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X112.293 Y109.272 F21000 G1 F2378 G1 X110.523 Y107.502 E.07914 ;PATH_TASK id=1627 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X110.523 Y108.04 F21000 G1 F2378 G1 X112.293 Y109.81 E.07914 ;PATH_TASK id=1628 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X112.293 Y110.347 F21000 G1 F2378 G1 X110.523 Y108.577 E.07914 ;PATH_TASK id=1629 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X110.523 Y109.115 F21000 G1 F2378 G1 X112.293 Y110.885 E.07914 ;PATH_TASK id=1630 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X112.293 Y111.423 F21000 G1 F2378 G1 X110.523 Y109.653 E.07914 ;PATH_TASK id=1631 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X110.523 Y110.19 F21000 G1 F2378 G1 X112.293 Y111.96 E.07914 ;PATH_TASK id=1632 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X112.293 Y112.498 F21000 G1 F2378 G1 X110.523 Y110.728 E.07914 ;PATH_TASK id=1633 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X110.523 Y111.266 F21000 G1 F2378 G1 X112.293 Y113.036 E.07914 ;PATH_TASK id=1634 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X112.293 Y113.573 F21000 G1 F2378 G1 X110.523 Y111.803 E.07914 ;PATH_TASK id=1635 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X110.523 Y112.341 F21000 G1 F2378 G1 X112.293 Y114.111 E.07914 ;PATH_TASK id=1636 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X111.829 Y114.185 F21000 G1 F2378 G1 X110.523 Y112.879 E.05841 ;PATH_TASK id=1637 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 X110.523 Y113.416 F21000 G1 F2378 G1 X111.292 Y114.185 E.03437 ;PATH_TASK id=1638 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4.8 F720 G1 X105.953 Y114.181 Z4.8 F21000 G1 Z4.2 F720 G1 E.7 F1500 M204 P1500 ;TYPE:Internal Bridge ;WIDTH:0.4 ;HEIGHT:0.4 G1 F2378 M106 S255 G1 X104.972 Y113.2 E.07249 G1 X105.049 Y113.123 E.00568 G1 X102.976 Y111.051 E.15313 G1 X103.218 Y110.81 E.01783 G1 X106.387 Y113.979 E.23416 G1 X107.023 Y113.979 E.03325 G1 X103.536 Y110.491 E.25767 G1 X103.854 Y110.173 E.02351 G1 X107.66 Y113.979 E.28118 G1 X108.296 Y113.979 E.03325 G1 X104.172 Y109.855 E.30469 G1 X104.49 Y109.537 E.02351 G1 X108.933 Y113.979 E.32821 G1 X109.569 Y113.979 E.03325 G1 X104.809 Y109.219 E.35172 G1 X105.127 Y108.901 E.02351 G1 X110.049 Y113.823 E.36369 G1 X110.049 Y113.186 E.03325 G1 X103.373 Y106.51 E.49331 G1 X103.531 Y106.351 E.01171 G1 X103.477 Y106.021 E.01749 G1 X103.52 Y106.021 E.00225 G1 X110.049 Y112.55 E.4824 G1 X110.049 Y111.914 E.03325 G1 X104.157 Y106.021 E.43538 G1 X104.793 Y106.021 E.03325 G1 X110.049 Y111.277 E.38836 G1 X110.049 Y110.641 E.03325 G1 X105.429 Y106.021 E.34134 G1 X106.066 Y106.021 E.03325 G1 X110.049 Y110.004 E.29432 G1 X110.049 Y109.368 E.03325 G1 X106.702 Y106.021 E.2473 G1 X107.339 Y106.021 E.03325 G1 X110.049 Y108.732 E.20028 G1 X110.049 Y108.095 E.03325 G1 X107.975 Y106.021 E.15326 G1 X108.611 Y106.021 E.03325 G1 X110.049 Y107.459 E.10624 G1 X110.049 Y106.823 E.03325 G1 X109.248 Y106.021 E.05922 G1 X109.884 Y106.021 E.03325 G1 X110.252 Y106.389 E.02716 ;PATH_TASK id=1639 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z4.8 F720 G1 X102.274 Y114 Z4.8 F21000 G1 Z4.2 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 ;HEIGHT:0.2 G1 F2378 M106 S252 G1 X100.274 Y114 E.0677 G1 X102.797 Y111.478 E.12076 G1 X102.37 Y111.051 E.02043 G1 X104.598 Y108.824 E.10662 G1 X102.952 Y107.178 E.07878 G1 X97.5 Y112.63 E.26101 G1 X97.5 Y108.485 E.1403 G1 X99.985 Y106 E.11899 G1 X97.985 Y106 E.0677 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:4.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;4.4 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;4.4 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1640 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 M486 S0 G1 Z5 F720 G1 X111.32 Y114.346 Z5 F21000 G1 Z4.4 F720 G1 E.7 F1500 M73 P94 R2 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F2176 G1 X97.154 Y114.346 E.47952 G1 X97.154 Y105.654 E.29424 G1 X111.32 Y105.654 E.47952 G1 X111.32 Y114.306 E.29289 ;PATH_TASK id=1641 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 M204 T3000 G1 X111.363 Y114.306 F21000 G1 X111.363 Y114.389 G1 X111.749 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F2176 G1 X96.725 Y114.775 E.50853 G1 X96.725 Y105.225 E.32326 G1 X111.749 Y105.225 E.50853 G1 X111.749 Y114.735 E.3219 ;PATH_TASK id=1642 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z5 F720 G1 X111.363 Y114.389 Z5 F21000 G1 X110.39 Y114.389 G1 X110.39 Y114.185 G1 Z4.4 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.423113 G1 F2176 G1 X111.159 Y113.416 E.03437 ;PATH_TASK id=1643 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X111.159 Y112.879 F21000 G1 F2176 G1 X109.852 Y114.185 E.05841 ;PATH_TASK id=1644 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X109.389 Y114.111 F21000 G1 F2176 G1 X111.159 Y112.341 E.07914 ;PATH_TASK id=1645 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X111.159 Y111.803 F21000 G1 F2176 G1 X109.389 Y113.573 E.07914 ;PATH_TASK id=1646 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X109.389 Y113.036 F21000 G1 F2176 G1 X111.159 Y111.266 E.07914 ;PATH_TASK id=1647 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X111.159 Y110.728 F21000 G1 F2176 G1 X109.389 Y112.498 E.07914 ;PATH_TASK id=1648 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X109.389 Y111.96 F21000 G1 F2176 G1 X111.159 Y110.19 E.07914 ;PATH_TASK id=1649 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X111.159 Y109.653 F21000 G1 F2176 G1 X109.389 Y111.423 E.07914 ;PATH_TASK id=1650 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X109.389 Y110.885 F21000 G1 F2176 G1 X111.159 Y109.115 E.07914 ;PATH_TASK id=1651 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X111.159 Y108.577 F21000 G1 F2176 G1 X109.389 Y110.347 E.07914 ;PATH_TASK id=1652 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X109.389 Y109.81 F21000 G1 F2176 G1 X111.159 Y108.04 E.07914 ;PATH_TASK id=1653 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X111.159 Y107.502 F21000 G1 F2176 G1 X109.389 Y109.272 E.07914 ;PATH_TASK id=1654 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X109.389 Y108.734 F21000 G1 F2176 G1 X111.159 Y106.964 E.07914 ;PATH_TASK id=1655 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X111.159 Y106.427 F21000 G1 F2176 G1 X109.389 Y108.197 E.07914 ;PATH_TASK id=1656 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X109.389 Y107.659 F21000 G1 F2176 G1 X111.159 Y105.889 E.07914 ;PATH_TASK id=1657 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X110.695 Y105.815 F21000 G1 F2176 G1 X109.389 Y107.121 E.05841 ;PATH_TASK id=1658 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X109.389 Y106.584 F21000 G1 F2176 G1 X110.157 Y105.815 E.03437 ;PATH_TASK id=1659 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z5 F720 G1 X104.866 Y106.052 Z5 F21000 G1 Z4.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.539938 G1 F2176 G1 X104.803 Y106.052 E.00257 G1 X104.772 Y106.106 E.00257 G1 X104.803 Y106.159 E.00257 G1 X104.866 Y106.159 E.00257 G1 X104.877 Y106.14 E.00091 ;PATH_TASK id=1660 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z5 F720 G1 X97.985 Y106 Z5 F21000 G1 Z4.4 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F2176 G1 X99.985 Y106 E.0677 G1 X97.5 Y108.485 E.11899 G1 X97.5 Y112.63 E.1403 G1 X104.13 Y106 E.31741 G1 X104.382 Y106 E.00853 G1 X104.382 Y109.892 E.13177 G1 X100.274 Y114 E.19665 G1 X102.274 Y114 E.0677 ;PATH_TASK id=1661 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z5 F720 G1 X109.098 Y112.941 Z5 F21000 G1 Z4.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.587297 G1 F2176 G1 X108.168 Y113.871 E.05949 G1 X109.098 Y113.871 E.04207 G1 X109.098 Y112.981 E.04025 ;PATH_TASK id=1662 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000 G1 X109.349 Y112.305 F21000 ;WIDTH:0.449999 G1 F2176 G1 X107.654 Y114 E.08118 G1 X107.078 Y114 E.01949 G1 X109.166 Y111.912 E.09997 G1 X109.166 Y111.336 E.01949 G1 X106.502 Y114 E.12753 G1 X105.926 Y114 E.01949 G1 X109.166 Y110.761 E.15508 G1 X109.166 Y110.185 E.01949 G1 X105.351 Y114 E.18264 G1 X104.79 Y114 E.019 G1 X104.79 Y113.986 E.00049 G1 X109.166 Y109.609 E.20951 G1 X109.166 Y109.034 E.01949 G1 X104.79 Y113.41 E.20951 G1 X104.79 Y112.835 E.01949 G1 X109.166 Y108.458 E.20951 G1 X109.166 Y107.882 E.01949 G1 X104.79 Y112.259 E.20951 G1 X104.79 Y111.683 E.01949 G1 X109.166 Y107.307 E.20951 G1 X109.166 Y106.731 E.01949 G1 X104.79 Y111.108 E.20951 G1 X104.79 Y110.532 E.01949 G1 X109.166 Y106.155 E.20951 G1 X109.166 Y106 E.00527 G1 X108.746 Y106 E.01422 G1 X104.79 Y109.956 E.1894 G1 X104.79 Y109.38 E.01949 G1 X108.17 Y106 E.16184 G1 X107.595 Y106 E.01949 G1 X104.79 Y108.805 E.13428 G1 X104.79 Y108.229 E.01949 G1 X107.019 Y106 E.10672 G1 X106.443 Y106 E.01949 G1 X104.79 Y107.653 E.07916 G1 X104.79 Y107.078 E.01949 G1 X106.051 Y105.816 E.06038 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:4.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;4.6 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;4.6 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1663 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 M486 S0 G1 Z5.2 F720 G1 X110.186 Y114.346 Z5.2 F21000 G1 Z4.6 F720 G1 E.7 F1500 ;TYPE:Inner wall G1 F2147 G1 X97.154 Y114.346 E.44113 G1 X97.154 Y105.654 E.29424 G1 X110.186 Y105.654 E.44113 G1 X110.186 Y114.306 E.29289 ;PATH_TASK id=1664 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 M204 T3000 G1 X110.229 Y114.306 F21000 G1 X110.229 Y114.389 G1 X110.229 Y114.389 G1 X110.614 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F2147 G1 X96.725 Y114.775 E.47014 G1 X96.725 Y105.225 E.32326 G1 X110.614 Y105.225 E.47014 G1 X110.614 Y114.735 E.3219 ;PATH_TASK id=1665 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z5.2 F720 G1 X110.229 Y114.389 Z5.2 F21000 G1 X103.916 Y114.389 G1 X103.916 Y113.841 G1 Z4.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.53993 G1 F2147 G1 X103.854 Y113.841 E.00257 G1 X103.823 Y113.894 E.00257 G1 X103.854 Y113.948 E.00257 G1 X103.916 Y113.948 E.00257 G1 X103.928 Y113.929 E.00091 ;PATH_TASK id=1666 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z5.2 F720 G1 X102.274 Y114 Z5.2 F21000 G1 Z4.6 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F2147 G1 X100.274 Y114 E.0677 G1 X103.433 Y110.842 E.15122 G1 X103.433 Y106.696 E.1403 G1 X97.5 Y112.63 E.28405 G1 X97.5 Y108.485 E.1403 G1 X99.985 Y106 E.11899 G1 X97.985 Y106 E.0677 ;PATH_TASK id=1667 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z5.2 F720 G1 X105.946 Y105.816 Z5.2 F21000 G1 Z4.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.45 G1 F2147 G1 X108.032 Y107.903 E.09987 G1 X108.032 Y108.478 E.01949 G1 X105.553 Y106 E.11866 G1 X104.977 Y106 E.01949 G1 X108.032 Y109.054 E.14622 G1 X108.032 Y109.63 E.01949 G1 X104.402 Y106 E.17378 G1 X103.84 Y106 E.019 G1 X103.84 Y106.014 E.00049 G1 X108.032 Y110.206 E.20064 G1 X108.032 Y110.781 E.01949 G1 X103.84 Y106.59 E.20064 G1 X103.84 Y107.165 E.01949 G1 X108.032 Y111.357 E.20064 G1 X108.032 Y111.933 E.01949 G1 X103.84 Y107.741 E.20064 G1 X103.84 Y108.317 E.01949 G1 X108.032 Y112.508 E.20064 G1 X108.032 Y113.084 E.01949 G1 X103.84 Y108.893 E.20064 G1 X103.84 Y109.468 E.01949 G1 X108.032 Y113.66 E.20064 G1 X108.032 Y114 E.01153 G1 X107.797 Y114 E.00795 G1 X103.84 Y110.044 E.1894 G1 X103.84 Y110.62 E.01949 G1 X107.221 Y114 E.16184 G1 X106.646 Y114 E.01949 G1 X103.84 Y111.195 E.13428 G1 X103.84 Y111.771 E.01949 G1 X106.07 Y114 E.10672 G1 X105.494 Y114 E.01949 G1 X103.84 Y112.347 E.07916 G1 X103.84 Y112.922 E.01949 G1 X105.102 Y114.184 E.06037 ;PATH_TASK id=1668 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z5.2 F720 G1 X108.032 Y107.615 Z5.2 F21000 G1 Z4.6 F720 G1 E.7 F1500 ;WIDTH:0.449999 G1 F2147 G1 X108.032 Y106.061 E.05261 G1 X106.478 Y106.061 E.05261 G1 X108.004 Y107.587 E.07305 ;PATH_TASK id=1669 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X107.608 Y106.461 F21000 ;WIDTH:0.546274 G1 F2147 G1 X107.545 Y106.461 E.00263 G1 X107.514 Y106.516 E.00263 G1 X107.545 Y106.57 E.00263 G1 X107.608 Y106.57 E.00263 G1 X107.62 Y106.55 E.00096 ;PATH_TASK id=1670 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z5.2 F720 G1 X109.256 Y105.815 Z5.2 F21000 G1 Z4.6 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.423113 G1 F2147 G1 X110.024 Y106.584 E.03437 ;PATH_TASK id=1671 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X110.024 Y107.121 F21000 G1 F2147 G1 X108.718 Y105.815 E.05841 ;PATH_TASK id=1672 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X108.254 Y105.889 F21000 G1 F2147 G1 X110.024 Y107.659 E.07914 ;PATH_TASK id=1673 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X110.024 Y108.197 F21000 G1 F2147 G1 X108.254 Y106.427 E.07914 ;PATH_TASK id=1674 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X108.254 Y106.964 F21000 G1 F2147 G1 X110.024 Y108.734 E.07914 ;PATH_TASK id=1675 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X110.024 Y109.272 F21000 G1 F2147 G1 X108.254 Y107.502 E.07914 ;PATH_TASK id=1676 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X108.254 Y108.04 F21000 G1 F2147 G1 X110.024 Y109.81 E.07914 ;PATH_TASK id=1677 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X110.024 Y110.347 F21000 G1 F2147 G1 X108.254 Y108.577 E.07914 ;PATH_TASK id=1678 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X108.254 Y109.115 F21000 G1 F2147 G1 X110.024 Y110.885 E.07914 ;PATH_TASK id=1679 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X110.024 Y111.423 F21000 G1 F2147 G1 X108.254 Y109.653 E.07914 ;PATH_TASK id=1680 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X108.254 Y110.19 F21000 G1 F2147 G1 X110.024 Y111.96 E.07914 ;PATH_TASK id=1681 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X110.024 Y112.498 F21000 G1 F2147 G1 X108.254 Y110.728 E.07914 ;PATH_TASK id=1682 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X108.254 Y111.266 F21000 G1 F2147 G1 X110.024 Y113.036 E.07914 ;PATH_TASK id=1683 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X110.024 Y113.573 F21000 G1 F2147 G1 X108.254 Y111.803 E.07914 ;PATH_TASK id=1684 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X108.254 Y112.341 F21000 G1 F2147 G1 X110.024 Y114.111 E.07914 ;PATH_TASK id=1685 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X109.561 Y114.185 F21000 G1 F2147 G1 X108.254 Y112.879 E.05841 ;PATH_TASK id=1686 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000 G1 X108.254 Y113.416 F21000 G1 F2147 G1 X109.023 Y114.185 E.03437 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:4.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;4.8 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;4.8 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1687 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 M486 S0 G1 Z5.4 F720 G1 X109.052 Y114.346 Z5.4 F21000 G1 Z4.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F1969 G1 X97.154 Y114.346 E.40273 G1 X97.154 Y105.654 E.29424 G1 X109.052 Y105.654 E.40273 G1 X109.052 Y114.306 E.29289 ;PATH_TASK id=1688 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 M204 T3000 G1 X109.094 Y114.306 F21000 G1 X109.094 Y114.389 G1 X109.094 Y114.389 G1 X109.48 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F1969 G1 X96.725 Y114.775 E.43174 G1 X96.725 Y105.225 E.32326 M73 P94 R1 G1 X109.48 Y105.225 E.43174 G1 X109.48 Y114.735 E.3219 ;PATH_TASK id=1689 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z5.4 F720 G1 X109.094 Y114.389 Z5.4 F21000 G1 X109.094 Y114.389 G1 X109.094 Y113.401 G1 X108.89 Y113.401 G1 Z4.8 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.43023 G1 F1969 G1 X108.106 Y114.185 E.03571 ;PATH_TASK id=1690 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X107.559 Y114.185 F21000 G1 F1969 G1 X108.89 Y112.853 E.06065 ;PATH_TASK id=1691 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X108.89 Y112.306 F21000 G1 F1969 G1 X107.011 Y114.185 E.0856 ;PATH_TASK id=1692 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X106.463 Y114.185 F21000 G1 F1969 G1 X108.89 Y111.758 E.11055 ;PATH_TASK id=1693 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X108.89 Y111.21 F21000 G1 F1969 G1 X105.915 Y114.185 E.13549 ;PATH_TASK id=1694 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X105.368 Y114.185 F21000 G1 F1969 G1 X108.89 Y110.662 E.16044 ;PATH_TASK id=1695 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X108.89 Y110.115 F21000 G1 F1969 G1 X104.82 Y114.185 E.18539 ;PATH_TASK id=1696 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X104.272 Y114.185 F21000 G1 F1969 G1 X108.89 Y109.567 E.21033 ;PATH_TASK id=1697 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X108.89 Y109.019 F21000 G1 F1969 G1 X104.19 Y113.719 E.21406 ;PATH_TASK id=1698 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X104.19 Y113.172 F21000 G1 F1969 G1 X108.89 Y108.472 E.21406 ;PATH_TASK id=1699 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X108.89 Y107.924 F21000 G1 F1969 G1 X104.19 Y112.624 E.21406 ;PATH_TASK id=1700 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X104.19 Y112.076 F21000 G1 F1969 G1 X108.89 Y107.376 E.21406 ;PATH_TASK id=1701 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X108.89 Y106.828 F21000 G1 F1969 G1 X104.19 Y111.528 E.21406 ;PATH_TASK id=1702 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X104.19 Y110.981 F21000 M73 P95 R1 G1 F1969 G1 X108.89 Y106.281 E.21406 ;PATH_TASK id=1703 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X108.808 Y105.815 F21000 G1 F1969 G1 X104.19 Y110.433 E.21033 ;PATH_TASK id=1704 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X104.19 Y109.885 F21000 G1 F1969 G1 X108.26 Y105.815 E.18538 ;PATH_TASK id=1705 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X107.713 Y105.815 F21000 G1 F1969 G1 X104.19 Y109.337 E.16043 ;PATH_TASK id=1706 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X104.19 Y108.79 F21000 G1 F1969 G1 X107.165 Y105.815 E.13549 ;PATH_TASK id=1707 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X106.617 Y105.815 F21000 G1 F1969 G1 X104.19 Y108.242 E.11054 ;PATH_TASK id=1708 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X104.19 Y107.694 F21000 G1 F1969 G1 X106.069 Y105.815 E.08559 ;PATH_TASK id=1709 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X105.522 Y105.815 F21000 G1 F1969 G1 X104.19 Y107.146 E.06065 ;PATH_TASK id=1710 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X104.19 Y106.599 F21000 G1 F1969 G1 X104.974 Y105.815 E.0357 ;PATH_TASK id=1711 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X103.968 Y106.061 F21000 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.449999 G1 F1969 G1 X102.891 Y106.061 E.03643 G1 X102.891 Y113.939 E.26669 G1 X103.968 Y113.939 E.03643 G1 X103.968 Y106.101 E.26533 ;PATH_TASK id=1712 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 X103.597 Y106.431 F21000 ;WIDTH:0.377571 G1 F1969 G1 X103.262 Y106.431 E.00931 G1 X103.262 Y113.569 E.1986 G1 X103.597 Y113.569 E.00931 G1 X103.597 Y106.471 E.19748 ;PATH_TASK id=1713 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z5.4 F720 G1 X97.985 Y106 Z5.4 F21000 G1 Z4.8 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F1969 G1 X99.985 Y106 E.0677 G1 X97.5 Y108.485 E.11899 G1 X97.5 Y112.63 E.1403 G1 X102.484 Y107.646 E.23862 G1 X102.484 Y111.791 E.1403 G1 X100.274 Y114 E.10579 G1 X102.274 Y114 E.0677 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:5 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;5 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;5 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1714 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 M486 S0 G1 Z5.6 F720 G1 X104.987 Y114.346 Z5.6 F21000 G1 Z5 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F1301 G1 X97.154 Y114.346 E.26517 G1 X97.154 Y105.654 E.29424 G1 X104.987 Y105.654 E.26517 G1 X104.987 Y114.306 E.29289 ;PATH_TASK id=1715 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 M204 T3000 G1 X105.03 Y114.306 F21000 G1 X105.03 Y114.389 G1 X105.03 Y114.389 G1 X105.416 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F1301 G1 X96.725 Y114.775 E.29418 G1 X96.725 Y105.225 E.32326 G1 X105.416 Y105.225 E.29418 G1 X105.416 Y114.735 E.3219 ;PATH_TASK id=1716 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z5.6 F720 G1 X105.03 Y114.389 Z5.6 F21000 G1 X103.466 Y113.96 G1 X101.535 Y110.74 G1 Z5 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F1301 G1 X101.535 Y112.74 E.0677 G1 X100.274 Y114 E.06035 G1 X97.5 Y114 E.09393 G1 X97.5 Y112.63 E.04638 G1 X101.535 Y108.595 E.19319 G1 X101.535 Y106 E.08784 G1 X99.985 Y106 E.05246 G1 X97.5 Y108.485 E.11899 G1 X97.5 Y106.485 E.0677 ;PATH_TASK id=1717 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z5.6 F720 G1 X103.019 Y106.061 Z5.6 F21000 G1 Z5 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.449999 G1 F1301 G1 X101.942 Y106.061 E.03643 G1 X101.942 Y113.939 E.26669 G1 X103.019 Y113.939 E.03643 G1 X103.019 Y106.101 E.26533 ;PATH_TASK id=1718 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X102.648 Y106.431 F21000 ;WIDTH:0.377573 G1 F1301 G1 X102.313 Y106.431 E.00931 G1 X102.313 Y113.569 E.1986 G1 X102.648 Y113.569 E.00931 G1 X102.648 Y106.471 E.19749 ;PATH_TASK id=1719 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z5.6 F720 G1 X104.826 Y106.613 Z5.6 F21000 G1 Z5 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.43696 G1 F1301 G1 X104.028 Y105.815 E.03699 ;PATH_TASK id=1720 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X103.471 Y105.815 F21000 G1 F1301 G1 X104.826 Y107.17 E.06281 ;PATH_TASK id=1721 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X104.826 Y107.728 F21000 G1 F1301 G1 X103.241 Y106.143 E.07344 ;PATH_TASK id=1722 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X103.241 Y106.7 F21000 G1 F1301 G1 X104.826 Y108.285 E.07344 ;PATH_TASK id=1723 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X104.826 Y108.842 F21000 G1 F1301 G1 X103.241 Y107.257 E.07344 ;PATH_TASK id=1724 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X103.241 Y107.814 F21000 G1 F1301 G1 X104.826 Y109.399 E.07344 ;PATH_TASK id=1725 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X104.826 Y109.957 F21000 G1 F1301 G1 X103.241 Y108.372 E.07344 ;PATH_TASK id=1726 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X103.241 Y108.929 F21000 G1 F1301 G1 X104.826 Y110.514 E.07344 ;PATH_TASK id=1727 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X104.826 Y111.071 F21000 G1 F1301 G1 X103.241 Y109.486 E.07344 ;PATH_TASK id=1728 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X103.241 Y110.043 F21000 G1 F1301 G1 X104.826 Y111.628 E.07344 ;PATH_TASK id=1729 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X104.826 Y112.186 F21000 G1 F1301 G1 X103.241 Y110.601 E.07344 ;PATH_TASK id=1730 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X103.241 Y111.158 F21000 G1 F1301 G1 X104.826 Y112.743 E.07344 ;PATH_TASK id=1731 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X104.826 Y113.3 F21000 G1 F1301 G1 X103.241 Y111.715 E.07344 ;PATH_TASK id=1732 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X103.241 Y112.273 F21000 G1 F1301 G1 X104.826 Y113.857 E.07344 ;PATH_TASK id=1733 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X104.596 Y114.185 F21000 G1 F1301 G1 X103.241 Y112.83 E.0628 ;PATH_TASK id=1734 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000 G1 X103.241 Y113.387 F21000 G1 F1301 G1 X104.039 Y114.185 E.03698 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:5.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;5.2 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;5.2 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1735 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 M486 S0 G1 Z5.8 F720 G1 X104.038 Y114.346 Z5.8 F21000 G1 Z5.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F1221 G1 X97.154 Y114.346 E.23304 G1 X97.154 Y105.654 E.29424 G1 X104.038 Y105.654 E.23304 G1 X104.038 Y114.306 E.29289 ;PATH_TASK id=1736 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 M204 T3000 G1 X104.081 Y114.306 F21000 G1 X104.081 Y114.389 G1 X104.081 Y114.389 G1 X104.467 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F1221 G1 X96.725 Y114.775 E.26205 G1 X96.725 Y105.225 E.32326 G1 X104.467 Y105.225 E.26205 G1 X104.467 Y114.735 E.3219 ;PATH_TASK id=1737 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z5.8 F720 G1 X104.081 Y114.389 Z5.8 F21000 G1 X104.081 Y114.389 G1 X104.081 Y113.387 G1 X103.877 Y113.387 G1 Z5.2 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.43696 G1 F1221 G1 X103.079 Y114.185 E.03699 ;PATH_TASK id=1738 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X102.521 Y114.185 F21000 G1 F1221 G1 X103.877 Y112.83 E.06281 ;PATH_TASK id=1739 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X103.877 Y112.272 F21000 G1 F1221 G1 X102.292 Y113.857 E.07344 ;PATH_TASK id=1740 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X102.292 Y113.3 F21000 G1 F1221 G1 X103.877 Y111.715 E.07344 ;PATH_TASK id=1741 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X103.877 Y111.158 F21000 G1 F1221 G1 X102.292 Y112.743 E.07344 ;PATH_TASK id=1742 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X102.292 Y112.186 F21000 G1 F1221 G1 X103.877 Y110.601 E.07344 ;PATH_TASK id=1743 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X103.877 Y110.043 F21000 G1 F1221 G1 X102.292 Y111.628 E.07344 ;PATH_TASK id=1744 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X102.292 Y111.071 F21000 G1 F1221 G1 X103.877 Y109.486 E.07344 ;PATH_TASK id=1745 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X103.877 Y108.929 F21000 G1 F1221 G1 X102.292 Y110.514 E.07344 ;PATH_TASK id=1746 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X102.292 Y109.957 F21000 G1 F1221 G1 X103.877 Y108.372 E.07344 ;PATH_TASK id=1747 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X103.877 Y107.814 F21000 G1 F1221 G1 X102.292 Y109.399 E.07344 ;PATH_TASK id=1748 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X102.292 Y108.842 F21000 G1 F1221 G1 X103.877 Y107.257 E.07344 ;PATH_TASK id=1749 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X103.877 Y106.7 F21000 G1 F1221 G1 X102.292 Y108.285 E.07344 ;PATH_TASK id=1750 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X102.292 Y107.727 F21000 G1 F1221 G1 X103.877 Y106.143 E.07344 ;PATH_TASK id=1751 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X103.647 Y105.815 F21000 G1 F1221 G1 X102.292 Y107.17 E.0628 ;PATH_TASK id=1752 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X102.292 Y106.613 F21000 G1 F1221 G1 X103.09 Y105.815 E.03698 ;PATH_TASK id=1753 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X102.07 Y106.061 F21000 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.449999 G1 F1221 G1 X100.993 Y106.061 E.03643 G1 X100.993 Y113.939 E.26669 G1 X102.07 Y113.939 E.03643 G1 X102.07 Y106.101 E.26533 ;PATH_TASK id=1754 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 X101.699 Y106.431 F21000 ;WIDTH:0.377572 G1 F1221 G1 X101.364 Y106.431 E.00931 G1 X101.364 Y113.569 E.1986 G1 X101.699 Y113.569 E.00931 G1 X101.699 Y106.471 E.19749 ;PATH_TASK id=1755 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z5.8 F720 G1 X97.5 Y106.22 Z5.8 F21000 G1 Z5.2 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F1221 G1 X97.5 Y108.22 E.0677 G1 X99.094 Y107.384 E.06093 G1 X99.586 Y106.891 E.02358 G1 X100.054 Y106 E.03408 G1 X100.586 Y106 E.01801 G1 X100.586 Y109.13 E.10597 G1 X99.586 Y111.036 E.07286 G1 X99.094 Y111.529 E.02358 G1 X97.5 Y112.365 E.06093 G1 X97.5 Y114 E.05535 G1 X100.206 Y114 E.0916 G1 X100.586 Y113.275 E.02772 G1 X100.586 Y111.275 E.0677 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 M106 S255 ;LAYER_CHANGE ;Z:5.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;5.4 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;5.4 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1756 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 M486 S0 G1 Z6 F720 G1 X103.089 Y114.346 Z6 F21000 G1 Z5.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F1200 G1 X97.154 Y114.346 E.20092 G1 X97.154 Y105.654 E.29424 G1 X103.089 Y105.654 E.20092 G1 X103.089 Y114.306 E.29289 ;PATH_TASK id=1757 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 M204 T3000 G1 X103.132 Y114.306 F21000 G1 X103.132 Y114.389 G1 X103.518 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F1200 G1 X96.725 Y114.775 E.22993 G1 X96.725 Y105.225 E.32326 G1 X103.518 Y105.225 E.22993 G1 X103.518 Y114.735 E.3219 M73 P96 R1 ;PATH_TASK id=1758 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z6 F720 G1 X103.132 Y114.389 Z6 F21000 G1 X97.674 Y114.389 G1 X97.674 Y114 G1 Z5.4 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F1200 G1 X97.5 Y114 E.0059 G1 X97.5 Y112.175 E.06179 G1 X99.094 Y111.882 E.05486 G1 X99.637 Y111.339 E.02602 G1 X99.637 Y107.194 E.1403 G1 X99.094 Y107.737 E.02602 G1 X97.5 Y108.03 E.05486 G1 X97.5 Y106.03 E.0677 ;PATH_TASK id=1759 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z6 F720 G1 X101.121 Y106.061 Z6 F21000 G1 Z5.4 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.449999 G1 F1200 G1 X100.044 Y106.061 E.03643 G1 X100.044 Y113.939 E.26669 G1 X101.121 Y113.939 E.03643 G1 X101.121 Y106.101 E.26533 ;PATH_TASK id=1760 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X100.75 Y106.431 F21000 ;WIDTH:0.377572 G1 F1200 G1 X100.415 Y106.431 E.00931 G1 X100.415 Y113.569 E.1986 G1 X100.75 Y113.569 E.00931 G1 X100.75 Y106.471 E.19749 ;PATH_TASK id=1761 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z6 F720 G1 X102.928 Y106.613 Z6 F21000 G1 Z5.4 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.43696 G1 F1200 G1 X102.13 Y105.815 E.03699 ;PATH_TASK id=1762 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X101.572 Y105.815 F21000 G1 F1200 G1 X102.928 Y107.17 E.06281 ;PATH_TASK id=1763 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X102.928 Y107.728 F21000 G1 F1200 G1 X101.343 Y106.143 E.07344 ;PATH_TASK id=1764 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X101.343 Y106.7 F21000 G1 F1200 G1 X102.928 Y108.285 E.07344 ;PATH_TASK id=1765 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X102.928 Y108.842 F21000 G1 F1200 G1 X101.343 Y107.257 E.07344 ;PATH_TASK id=1766 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X101.343 Y107.814 F21000 G1 F1200 G1 X102.928 Y109.399 E.07344 ;PATH_TASK id=1767 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X102.928 Y109.957 F21000 G1 F1200 G1 X101.343 Y108.372 E.07344 ;PATH_TASK id=1768 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X101.343 Y108.929 F21000 G1 F1200 G1 X102.928 Y110.514 E.07344 ;PATH_TASK id=1769 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X102.928 Y111.071 F21000 G1 F1200 G1 X101.343 Y109.486 E.07344 ;PATH_TASK id=1770 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X101.343 Y110.043 F21000 G1 F1200 G1 X102.928 Y111.628 E.07344 ;PATH_TASK id=1771 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X102.928 Y112.186 F21000 G1 F1200 G1 X101.343 Y110.601 E.07344 ;PATH_TASK id=1772 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X101.343 Y111.158 F21000 G1 F1200 G1 X102.928 Y112.743 E.07344 ;PATH_TASK id=1773 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X102.928 Y113.3 F21000 G1 F1200 G1 X101.343 Y111.715 E.07344 ;PATH_TASK id=1774 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X101.343 Y112.273 F21000 G1 F1200 G1 X102.928 Y113.857 E.07344 ;PATH_TASK id=1775 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X102.698 Y114.185 F21000 G1 F1200 G1 X101.343 Y112.83 E.0628 ;PATH_TASK id=1776 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000 G1 X101.343 Y113.387 F21000 G1 F1200 G1 X102.141 Y114.185 E.03698 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:5.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;5.6 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;5.6 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1777 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 M486 S0 G1 Z6.2 F720 G1 X102.14 Y114.346 Z6.2 F21000 G1 Z5.6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F1200 G1 X97.154 Y114.346 E.16879 G1 X97.154 Y105.654 E.29424 G1 X102.14 Y105.654 E.16879 G1 X102.14 Y114.306 E.29289 ;PATH_TASK id=1778 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 M204 T3000 G1 X102.183 Y114.306 F21000 G1 X102.183 Y114.389 G1 X102.569 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F1200 G1 X96.725 Y114.775 E.1978 G1 X96.725 Y105.225 E.32326 G1 X102.569 Y105.225 E.1978 G1 X102.569 Y114.735 E.3219 ;PATH_TASK id=1779 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z6.2 F720 G1 X102.183 Y114.389 Z6.2 F21000 G1 X102.183 Y113.387 G1 X101.979 Y113.387 G1 Z5.6 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.43696 G1 F1200 G1 X101.181 Y114.185 E.03699 ;PATH_TASK id=1780 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X100.623 Y114.185 F21000 G1 F1200 G1 X101.979 Y112.83 E.06281 ;PATH_TASK id=1781 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X101.979 Y112.272 F21000 G1 F1200 G1 X100.394 Y113.857 E.07344 ;PATH_TASK id=1782 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X100.394 Y113.3 F21000 G1 F1200 G1 X101.979 Y111.715 E.07344 ;PATH_TASK id=1783 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X101.979 Y111.158 F21000 G1 F1200 G1 X100.394 Y112.743 E.07344 ;PATH_TASK id=1784 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X100.394 Y112.186 F21000 G1 F1200 G1 X101.979 Y110.601 E.07344 ;PATH_TASK id=1785 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X101.979 Y110.043 F21000 G1 F1200 G1 X100.394 Y111.628 E.07344 ;PATH_TASK id=1786 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X100.394 Y111.071 F21000 G1 F1200 G1 X101.979 Y109.486 E.07344 ;PATH_TASK id=1787 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X101.979 Y108.929 F21000 G1 F1200 G1 X100.394 Y110.514 E.07344 ;PATH_TASK id=1788 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X100.394 Y109.957 F21000 G1 F1200 G1 X101.979 Y108.372 E.07344 ;PATH_TASK id=1789 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X101.979 Y107.814 F21000 G1 F1200 G1 X100.394 Y109.399 E.07344 ;PATH_TASK id=1790 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X100.394 Y108.842 F21000 G1 F1200 G1 X101.979 Y107.257 E.07344 ;PATH_TASK id=1791 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X101.979 Y106.7 F21000 G1 F1200 G1 X100.394 Y108.285 E.07344 ;PATH_TASK id=1792 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X100.394 Y107.727 F21000 G1 F1200 G1 X101.979 Y106.143 E.07344 ;PATH_TASK id=1793 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X101.749 Y105.815 F21000 G1 F1200 G1 X100.394 Y107.17 E.0628 ;PATH_TASK id=1794 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X100.394 Y106.613 F21000 G1 F1200 G1 X101.192 Y105.815 E.03698 ;PATH_TASK id=1795 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 X100.172 Y106.061 F21000 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.449999 G1 F1200 G1 X99.269 Y106.061 E.03056 G1 X99.269 Y113.939 E.26669 G1 X100.172 Y113.939 E.03056 G1 X100.172 Y106.101 E.26533 ;PATH_TASK id=1796 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z6.2 F720 G1 X99.72 Y113.488 Z6.2 F21000 G1 Z5.6 F720 G1 E.7 F1500 ;WIDTH:0.538826 G1 F1200 G1 X99.72 Y106.552 E.286 ;PATH_TASK id=1797 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z6.2 F720 G1 X97.66 Y106 Z6.2 F21000 G1 Z5.6 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F1200 G1 X97.5 Y106 E.00542 G1 X97.5 Y107.84 E.06228 G1 X98.861 Y108.054 E.04667 G1 X98.861 Y112.199 E.1403 G1 X97.5 Y111.985 E.04667 G1 X97.5 Y113.985 E.0677 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:5.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;5.8 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;5.8 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1798 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 M486 S0 G1 Z6.4 F720 G1 X101.191 Y114.346 Z6.4 F21000 G1 Z5.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F1200 G1 X97.154 Y114.346 E.13667 G1 X97.154 Y105.654 E.29424 G1 X101.191 Y105.654 E.13667 G1 X101.191 Y114.306 E.29289 ;PATH_TASK id=1799 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 M204 T3000 G1 X101.234 Y114.306 F21000 G1 X101.234 Y114.389 G1 X101.234 Y114.389 G1 X101.62 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F1200 G1 X96.725 Y114.775 E.16568 G1 X96.725 Y105.225 E.32326 G1 X101.62 Y105.225 E.16568 G1 X101.62 Y114.735 E.3219 ;PATH_TASK id=1800 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z6.4 F720 G1 X101.234 Y114.389 Z6.4 F21000 G1 X99.245 Y114.389 G1 X99.245 Y113.962 G1 Z5.8 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.403918 G1 F1200 G1 X99.245 Y106.078 E.23668 ;PATH_TASK id=1801 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z6.4 F720 G1 X97.627 Y106 Z6.4 F21000 G1 Z5.8 F720 G1 E.7 F1500 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F1200 G1 X97.5 Y106 E.00431 G1 X97.5 Y107.872 E.06339 G1 X98.861 Y108.007 E.04632 G1 X98.861 Y112.152 E.1403 G1 X97.5 Y112.017 E.04632 G1 X97.516 Y114 E.06713 ;PATH_TASK id=1802 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 E-.7 F2700 G1 Z6.4 F720 G1 X101.03 Y106.613 Z6.4 F21000 G1 Z5.8 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.43696 G1 F1200 G1 X100.232 Y105.815 E.03699 ;PATH_TASK id=1803 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X99.674 Y105.815 F21000 G1 F1200 G1 X101.03 Y107.17 E.06281 ;PATH_TASK id=1804 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X101.03 Y107.728 F21000 G1 F1200 G1 X99.445 Y106.143 E.07344 ;PATH_TASK id=1805 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X99.445 Y106.7 F21000 G1 F1200 G1 X101.03 Y108.285 E.07344 ;PATH_TASK id=1806 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X101.03 Y108.842 F21000 G1 F1200 G1 X99.445 Y107.257 E.07344 ;PATH_TASK id=1807 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X99.445 Y107.814 F21000 G1 F1200 G1 X101.03 Y109.399 E.07344 ;PATH_TASK id=1808 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X101.03 Y109.957 F21000 G1 F1200 G1 X99.445 Y108.372 E.07344 ;PATH_TASK id=1809 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X99.445 Y108.929 F21000 G1 F1200 G1 X101.03 Y110.514 E.07344 ;PATH_TASK id=1810 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X101.03 Y111.071 F21000 G1 F1200 G1 X99.445 Y109.486 E.07344 ;PATH_TASK id=1811 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X99.445 Y110.043 F21000 G1 F1200 G1 X101.03 Y111.628 E.07344 ;PATH_TASK id=1812 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X101.03 Y112.186 F21000 G1 F1200 G1 X99.445 Y110.601 E.07344 ;PATH_TASK id=1813 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X99.445 Y111.158 F21000 G1 F1200 G1 X101.03 Y112.743 E.07344 ;PATH_TASK id=1814 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X101.03 Y113.3 F21000 G1 F1200 G1 X99.445 Y111.715 E.07344 ;PATH_TASK id=1815 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X99.445 Y112.273 F21000 G1 F1200 G1 X101.03 Y113.857 E.07344 ;PATH_TASK id=1816 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X100.8 Y114.185 F21000 G1 F1200 G1 X99.445 Y112.83 E.0628 ;PATH_TASK id=1817 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000 G1 X99.445 Y113.387 F21000 G1 F1200 G1 X100.243 Y114.185 E.03698 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;6 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;6 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1818 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 M486 S0 G1 Z6.6 F720 G1 X100.242 Y114.346 Z6.6 F21000 G1 Z6 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F1200 G1 X97.154 Y114.346 E.10454 G1 X97.154 Y105.654 E.29424 G1 X100.242 Y105.654 E.10454 G1 X100.242 Y114.306 E.29289 ;PATH_TASK id=1819 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 M204 T3000 G1 X100.285 Y114.306 F21000 G1 X100.285 Y114.389 G1 X100.285 Y114.389 G1 X100.671 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F1200 G1 X96.725 Y114.775 E.13355 G1 X96.725 Y105.225 E.32326 G1 X100.671 Y105.225 E.13355 G1 X100.671 Y114.735 E.3219 ;PATH_TASK id=1820 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z6.6 F720 G1 X100.285 Y114.389 Z6.6 F21000 G1 X100.285 Y114.389 G1 X100.285 Y113.394 G1 X100.081 Y113.394 G1 Z6 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.433766 G1 F1200 G1 X99.289 Y114.185 E.03638 ;PATH_TASK id=1821 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X99.084 Y113.838 F21000 G1 F1200 G1 X100.081 Y112.841 E.04582 ;PATH_TASK id=1822 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X100.081 Y112.288 F21000 G1 F1200 G1 X99.084 Y113.285 E.04582 ;PATH_TASK id=1823 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X99.084 Y112.732 F21000 G1 F1200 G1 X100.081 Y111.735 E.04582 ;PATH_TASK id=1824 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X100.081 Y111.183 F21000 G1 F1200 G1 X99.084 Y112.18 E.04582 ;PATH_TASK id=1825 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X99.084 Y111.627 F21000 M73 P97 R1 G1 F1200 G1 X100.081 Y110.63 E.04582 ;PATH_TASK id=1826 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X100.081 Y110.077 F21000 G1 F1200 G1 X99.084 Y111.074 E.04582 ;PATH_TASK id=1827 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X99.084 Y110.521 F21000 G1 F1200 G1 X100.081 Y109.524 E.04582 ;PATH_TASK id=1828 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X100.081 Y108.972 F21000 G1 F1200 G1 X99.084 Y109.969 E.04582 ;PATH_TASK id=1829 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X99.084 Y109.416 F21000 G1 F1200 G1 X100.081 Y108.419 E.04582 ;PATH_TASK id=1830 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X100.081 Y107.866 F21000 G1 F1200 G1 X99.084 Y108.863 E.04582 ;PATH_TASK id=1831 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X99.084 Y108.31 F21000 G1 F1200 G1 X100.081 Y107.314 E.04582 ;PATH_TASK id=1832 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X100.081 Y106.761 F21000 G1 F1200 G1 X99.084 Y107.758 E.04582 ;PATH_TASK id=1833 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X99.084 Y107.205 F21000 G1 F1200 G1 X100.081 Y106.208 E.04582 ;PATH_TASK id=1834 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X99.921 Y105.815 F21000 G1 F1200 G1 X99.084 Y106.652 E.03848 ;PATH_TASK id=1835 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000 G1 X98.861 Y106.281 F21000 M204 P7000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F1200 G1 X98.861 Y108.281 E.0677 G1 X97.5 Y107.682 E.05036 G1 X97.5 Y111.827 E.1403 G1 X98.861 Y112.426 E.05036 G1 X98.861 Y114 E.05328 G1 X98.436 Y114 E.01442 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:6.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;6.2 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;6.2 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1836 conformal=0 surface=-1 source_layer=30 shell_offset=-1.000000 M486 S0 G1 Z6.8 F720 G1 X99.293 Y114.346 Z6.8 F21000 G1 Z6.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F1200 G1 X97.154 Y114.346 E.07242 G1 X97.154 Y105.654 E.29424 G1 X99.293 Y105.654 E.07242 G1 X99.293 Y114.306 E.29289 ;PATH_TASK id=1837 conformal=0 surface=-1 source_layer=30 shell_offset=-1.000000 M204 T3000 G1 X99.336 Y114.306 F21000 G1 X99.336 Y114.389 G1 X99.336 Y114.389 G1 X99.722 Y114.775 M204 P3000 ;TYPE:Outer wall G1 F1200 G1 X96.725 Y114.775 E.10143 G1 X96.725 Y105.225 E.32326 G1 X99.722 Y105.225 E.10143 G1 X99.722 Y114.735 E.3219 ;PATH_TASK id=1838 conformal=0 surface=-1 source_layer=30 shell_offset=-1.000000 M204 T7000 G1 E-.7 F2700 G1 Z6.8 F720 G1 X99.336 Y114.389 Z6.8 F21000 G1 X99.336 Y105.611 G1 X99.336 Y106.061 G1 X98.886 Y106.061 G1 Z6.2 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill G1 F1200 G1 X97.561 Y106.061 E.04486 G1 X97.561 Y113.939 E.26669 G1 X98.886 Y113.939 E.04486 G1 X98.886 Y106.101 E.26533 ;PATH_TASK id=1839 conformal=0 surface=-1 source_layer=30 shell_offset=-1.000000 G1 X98.453 Y106.494 F21000 ;WIDTH:0.502014 G1 F1200 G1 X97.994 Y106.494 E.01753 G1 X97.994 Y113.506 E.2677 G1 X98.453 Y113.506 E.01753 G1 X98.453 Y106.534 E.26617 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 M106 S252 ;LAYER_CHANGE ;Z:6.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;6.4 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;6.4 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1840 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 M486 S0 G1 Z7 F720 G1 X97.154 Y114.346 F21000 G1 Z6.394 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F10200 G1 X97.154 Y105.654 E.29421 G1 X99.5 Y105.654 E.07941 G1 X106 Y105.654 Z5.024 E.22485 G1 X109 Y105.654 E.10155 G1 X115.5 Y105.654 Z3.878 E.22341 G1 X118.5 Y105.654 E.10155 G1 X125 Y105.654 Z2.965 E.22218 G1 X128 Y105.654 E.10155 G1 X134.5 Y105.654 Z2.282 E.22123 G1 X137.5 Y105.654 E.10155 G1 X144 Y105.654 Z1.827 E.22056 G1 X147 Y105.654 E.10155 G1 X152.846 Y105.654 Z1.623 E.198 G1 X152.846 Y114.346 E.29421 G1 X147 Y114.346 Z1.827 E.198 G1 X144 Y114.346 E.10155 G1 X137.5 Y114.346 Z2.282 E.22056 G1 X134.5 Y114.346 E.10155 G1 X128 Y114.346 Z2.965 E.22123 G1 X125 Y114.346 E.10155 G1 X118.5 Y114.346 Z3.878 E.22218 G1 X115.5 Y114.346 E.10155 G1 X109 Y114.346 Z5.024 E.22341 G1 X106 Y114.346 E.10155 G1 X99.5 Y114.346 Z6.394 E.22485 G1 X97.194 Y114.346 E.07806 ;PATH_TASK id=1841 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 M204 T3000 G1 Z6.994 F720 G1 X97.194 Y114.389 F21000 G1 X97.111 Y114.389 G1 X97.111 Y114.389 G1 X96.725 Y114.775 G1 Z6.394 F720 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X96.725 Y105.225 E.32326 G1 X99.5 Y105.225 E.09393 G1 X106 Y105.225 Z5.024 E.22485 G1 X109 Y105.225 E.10155 G1 X115.5 Y105.225 Z3.878 E.22341 G1 X118.5 Y105.225 E.10155 G1 X125 Y105.225 Z2.965 E.22218 G1 X128 Y105.225 E.10155 G1 X134.5 Y105.225 Z2.282 E.22123 G1 X137.5 Y105.225 E.10155 G1 X144 Y105.225 Z1.827 E.22056 G1 X147 Y105.225 E.10155 G1 X153.275 Y105.225 Z1.608 E.21253 G1 X153.275 Y114.775 E.32326 G1 X147 Y114.775 Z1.827 E.21253 G1 X144 Y114.775 E.10155 G1 X137.5 Y114.775 Z2.282 E.22056 G1 X134.5 Y114.775 E.10155 G1 X128 Y114.775 Z2.965 E.22123 G1 X125 Y114.775 E.10155 G1 X118.5 Y114.775 Z3.878 E.22218 G1 X115.5 Y114.775 E.10155 G1 X109 Y114.775 Z5.024 E.22341 G1 X106 Y114.775 E.10155 G1 X99.5 Y114.775 Z6.394 E.22485 G1 X96.765 Y114.775 E.09258 ;PATH_TASK id=1842 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 M204 T7000 G1 E-.7 F2700 G1 Z6.994 F720 G1 X97.111 Y114.389 F21000 M73 P97 R0 G1 X97.111 Y105.968 G1 X97.276 Y105.968 G1 Z6.394 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.46739 G1 F10601.455 G1 X99.5 Y105.968 E.0785 G1 X106 Y105.968 Z5.024 E.23446 G1 X109 Y105.968 E.10588 G1 X115.5 Y105.968 Z3.878 E.23295 G1 X118.5 Y105.968 E.10588 G1 X125 Y105.968 Z2.965 E.23167 G1 X128 Y105.968 E.10588 G1 X134.5 Y105.968 Z2.282 E.23068 G1 X137.5 Y105.968 E.10588 G1 X144 Y105.968 Z1.827 E.22998 G1 X147 Y105.968 E.10588 G1 X152.541 Y105.968 Z1.633 E.19569 ;PATH_TASK id=1842 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X152.541 Y105.968 F21000 G1 F10601.455 G1 X152.541 Y106.392 E.01497 G1 X147 Y106.392 Z1.827 E.19569 G1 X144 Y106.392 E.10588 G1 X137.5 Y106.392 Z2.282 E.22998 G1 X134.5 Y106.392 E.10588 G1 X128 Y106.392 Z2.965 E.23068 G1 X125 Y106.392 E.10588 G1 X118.5 Y106.392 Z3.878 E.23167 G1 X115.5 Y106.392 E.10588 G1 X109 Y106.392 Z5.024 E.23295 G1 X106 Y106.392 E.10588 G1 X99.5 Y106.392 Z6.394 E.23446 G1 X97.459 Y106.392 E.07204 ;PATH_TASK id=1842 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X97.459 Y106.392 F21000 G1 F10601.455 G1 X97.459 Y106.817 E.015 G1 X99.5 Y106.817 E.07204 G1 X106 Y106.817 Z5.024 E.23446 G1 X109 Y106.817 E.10588 G1 X115.5 Y106.817 Z3.878 E.23295 G1 X118.5 Y106.817 E.10588 G1 X125 Y106.817 Z2.965 E.23167 G1 X128 Y106.817 E.10588 G1 X134.5 Y106.817 Z2.282 E.23068 G1 X137.5 Y106.817 E.10588 G1 X144 Y106.817 Z1.827 E.22998 G1 X147 Y106.817 E.10588 G1 X152.541 Y106.817 Z1.633 E.19569 ;PATH_TASK id=1842 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X152.541 Y106.817 F21000 G1 F10601.455 G1 X152.541 Y107.241 E.01497 G1 X147 Y107.241 Z1.827 E.19569 G1 X144 Y107.241 E.10588 G1 X137.5 Y107.241 Z2.282 E.22998 G1 X134.5 Y107.241 E.10588 G1 X128 Y107.241 Z2.965 E.23068 G1 X125 Y107.241 E.10588 G1 X118.5 Y107.241 Z3.878 E.23167 G1 X115.5 Y107.241 E.10588 G1 X109 Y107.241 Z5.024 E.23295 G1 X106 Y107.241 E.10588 G1 X99.5 Y107.241 Z6.394 E.23446 G1 X97.459 Y107.241 E.07204 ;PATH_TASK id=1842 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X97.459 Y107.241 F21000 G1 F10601.455 G1 X97.459 Y107.665 E.01497 G1 X99.5 Y107.665 E.07204 G1 X106 Y107.665 Z5.024 E.23446 G1 X109 Y107.665 E.10588 G1 X115.5 Y107.665 Z3.878 E.23295 G1 X118.5 Y107.665 E.10588 G1 X125 Y107.665 Z2.965 E.23167 G1 X128 Y107.665 E.10588 G1 X134.5 Y107.665 Z2.282 E.23068 G1 X137.5 Y107.665 E.10588 G1 X144 Y107.665 Z1.827 E.22998 G1 X147 Y107.665 E.10588 G1 X152.541 Y107.665 Z1.633 E.19569 ;PATH_TASK id=1842 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X152.541 Y107.665 F21000 G1 F10601.455 G1 X152.541 Y108.09 E.015 G1 X147 Y108.09 Z1.827 E.19569 G1 X144 Y108.09 E.10588 G1 X137.5 Y108.09 Z2.282 E.22998 G1 X134.5 Y108.09 E.10588 G1 X128 Y108.09 Z2.965 E.23068 G1 X125 Y108.09 E.10588 G1 X118.5 Y108.09 Z3.878 E.23167 G1 X115.5 Y108.09 E.10588 G1 X109 Y108.09 Z5.024 E.23295 G1 X106 Y108.09 E.10588 G1 X99.5 Y108.09 Z6.394 E.23446 G1 X97.459 Y108.09 E.07204 ;PATH_TASK id=1842 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X97.459 Y108.09 F21000 G1 F10601.455 G1 X97.459 Y108.514 E.01497 G1 X99.5 Y108.514 E.07204 G1 X106 Y108.514 Z5.024 E.23446 G1 X109 Y108.514 E.10588 G1 X115.5 Y108.514 Z3.878 E.23295 G1 X118.5 Y108.514 E.10588 G1 X125 Y108.514 Z2.965 E.23167 G1 X128 Y108.514 E.10588 G1 X134.5 Y108.514 Z2.282 E.23068 G1 X137.5 Y108.514 E.10588 G1 X144 Y108.514 Z1.827 E.22998 G1 X147 Y108.514 E.10588 G1 X152.541 Y108.514 Z1.633 E.19569 ;PATH_TASK id=1842 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X152.541 Y108.514 F21000 G1 F10601.455 G1 X152.541 Y108.939 E.015 G1 X147 Y108.939 Z1.827 E.19569 G1 X144 Y108.939 E.10588 G1 X137.5 Y108.939 Z2.282 E.22998 G1 X134.5 Y108.939 E.10588 G1 X128 Y108.939 Z2.965 E.23068 G1 X125 Y108.939 E.10588 G1 X118.5 Y108.939 Z3.878 E.23167 G1 X115.5 Y108.939 E.10588 G1 X109 Y108.939 Z5.024 E.23295 G1 X106 Y108.939 E.10588 G1 X99.5 Y108.939 Z6.394 E.23446 G1 X97.459 Y108.939 E.07204 ;PATH_TASK id=1842 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X97.459 Y108.939 F21000 G1 F10601.455 G1 X97.459 Y109.363 E.01497 G1 X99.5 Y109.363 E.07204 G1 X106 Y109.363 Z5.024 E.23446 G1 X109 Y109.363 E.10588 G1 X115.5 Y109.363 Z3.878 E.23295 G1 X118.5 Y109.363 E.10588 G1 X125 Y109.363 Z2.965 E.23167 G1 X128 Y109.363 E.10588 G1 X134.5 Y109.363 Z2.282 E.23068 G1 X137.5 Y109.363 E.10588 G1 X144 Y109.363 Z1.827 E.22998 G1 X147 Y109.363 E.10588 G1 X152.541 Y109.363 Z1.633 E.19569 ;PATH_TASK id=1842 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X152.541 Y109.363 F21000 G1 F10601.455 G1 X152.541 Y109.788 E.015 G1 X147 Y109.788 Z1.827 E.19569 G1 X144 Y109.788 E.10588 G1 X137.5 Y109.788 Z2.282 E.22998 G1 X134.5 Y109.788 E.10588 G1 X128 Y109.788 Z2.965 E.23068 G1 X125 Y109.788 E.10588 G1 X118.5 Y109.788 Z3.878 E.23167 G1 X115.5 Y109.788 E.10588 G1 X109 Y109.788 Z5.024 E.23295 G1 X106 Y109.788 E.10588 G1 X99.5 Y109.788 Z6.394 E.23446 G1 X97.459 Y109.788 E.07204 ;PATH_TASK id=1842 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X97.459 Y109.788 F21000 G1 F10601.455 G1 X97.459 Y110.212 E.01497 ;PATH_TASK id=1842 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X97.459 Y110.212 F21000 G1 F10601.455 G1 X99.5 Y110.212 E.07204 G1 X106 Y110.212 Z5.024 E.23446 G1 X109 Y110.212 E.10588 G1 X115.5 Y110.212 Z3.878 E.23295 G1 X118.5 Y110.212 E.10588 G1 X125 Y110.212 Z2.965 E.23167 G1 X128 Y110.212 E.10588 G1 X134.5 Y110.212 Z2.282 E.23068 G1 X137.5 Y110.212 E.10588 G1 X144 Y110.212 Z1.827 E.22998 G1 X147 Y110.212 E.10588 G1 X152.541 Y110.212 Z1.633 E.19569 ;PATH_TASK id=1842 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X152.541 Y110.212 F21000 G1 F10601.455 G1 X152.541 Y110.637 E.015 G1 X147 Y110.637 Z1.827 E.19569 G1 X144 Y110.637 E.10588 G1 X137.5 Y110.637 Z2.282 E.22998 G1 X134.5 Y110.637 E.10588 G1 X128 Y110.637 Z2.965 E.23068 G1 X125 Y110.637 E.10588 G1 X118.5 Y110.637 Z3.878 E.23167 G1 X115.5 Y110.637 E.10588 G1 X109 Y110.637 Z5.024 E.23295 G1 X106 Y110.637 E.10588 G1 X99.5 Y110.637 Z6.394 E.23446 G1 X97.459 Y110.637 E.07204 ;PATH_TASK id=1842 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X97.459 Y110.637 F21000 G1 F10601.455 G1 X97.459 Y111.061 E.01497 G1 X99.5 Y111.061 E.07204 G1 X106 Y111.061 Z5.024 E.23446 G1 X109 Y111.061 E.10588 G1 X115.5 Y111.061 Z3.878 E.23295 G1 X118.5 Y111.061 E.10588 G1 X125 Y111.061 Z2.965 E.23167 G1 X128 Y111.061 E.10588 G1 X134.5 Y111.061 Z2.282 E.23068 G1 X137.5 Y111.061 E.10588 G1 X144 Y111.061 Z1.827 E.22998 G1 X147 Y111.061 E.10588 G1 X152.541 Y111.061 Z1.633 E.19569 ;PATH_TASK id=1842 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X152.541 Y111.061 F21000 G1 F10601.455 G1 X152.541 Y111.486 E.015 G1 X147 Y111.486 Z1.827 E.19569 G1 X144 Y111.486 E.10588 G1 X137.5 Y111.486 Z2.282 E.22998 G1 X134.5 Y111.486 E.10588 G1 X128 Y111.486 Z2.965 E.23068 G1 X125 Y111.486 E.10588 G1 X118.5 Y111.486 Z3.878 E.23167 G1 X115.5 Y111.486 E.10588 G1 X109 Y111.486 Z5.024 E.23295 G1 X106 Y111.486 E.10588 G1 X99.5 Y111.486 Z6.394 E.23446 G1 X97.459 Y111.486 E.07204 ;PATH_TASK id=1842 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X97.459 Y111.486 F21000 G1 F10601.455 G1 X97.459 Y111.91 E.01497 G1 X99.5 Y111.91 E.07204 G1 X106 Y111.91 Z5.024 E.23446 G1 X109 Y111.91 E.10588 G1 X115.5 Y111.91 Z3.878 E.23295 G1 X118.5 Y111.91 E.10588 G1 X125 Y111.91 Z2.965 E.23167 G1 X128 Y111.91 E.10588 G1 X134.5 Y111.91 Z2.282 E.23068 G1 X137.5 Y111.91 E.10588 G1 X144 Y111.91 Z1.827 E.22998 G1 X147 Y111.91 E.10588 G1 X152.541 Y111.91 Z1.633 E.19569 ;PATH_TASK id=1842 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X152.541 Y111.91 F21000 G1 F10601.455 G1 X152.541 Y112.335 E.015 G1 X147 Y112.335 Z1.827 E.19569 G1 X144 Y112.335 E.10588 G1 X137.5 Y112.335 Z2.282 E.22998 G1 X134.5 Y112.335 E.10588 G1 X128 Y112.335 Z2.965 E.23068 G1 X125 Y112.335 E.10588 G1 X118.5 Y112.335 Z3.878 E.23167 G1 X115.5 Y112.335 E.10588 G1 X109 Y112.335 Z5.024 E.23295 G1 X106 Y112.335 E.10588 G1 X99.5 Y112.335 Z6.394 E.23446 G1 X97.459 Y112.335 E.07204 ;PATH_TASK id=1842 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X97.459 Y112.335 F21000 G1 F10601.455 G1 X97.459 Y112.759 E.01497 G1 X99.5 Y112.759 E.07204 G1 X106 Y112.759 Z5.024 E.23446 G1 X109 Y112.759 E.10588 G1 X115.5 Y112.759 Z3.878 E.23295 G1 X118.5 Y112.759 E.10588 G1 X125 Y112.759 Z2.965 E.23167 G1 X128 Y112.759 E.10588 G1 X134.5 Y112.759 Z2.282 E.23068 G1 X137.5 Y112.759 E.10588 G1 X144 Y112.759 Z1.827 E.22998 G1 X147 Y112.759 E.10588 G1 X152.541 Y112.759 Z1.633 E.19569 ;PATH_TASK id=1842 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X152.541 Y112.759 F21000 G1 F10601.455 G1 X152.541 Y113.184 E.015 G1 X147 Y113.184 Z1.827 E.19569 G1 X144 Y113.184 E.10588 G1 X137.5 Y113.184 Z2.282 E.22998 G1 X134.5 Y113.184 E.10588 M73 P98 R0 G1 X128 Y113.184 Z2.965 E.23068 G1 X125 Y113.184 E.10588 G1 X118.5 Y113.184 Z3.878 E.23167 G1 X115.5 Y113.184 E.10588 G1 X109 Y113.184 Z5.024 E.23295 G1 X106 Y113.184 E.10588 G1 X99.5 Y113.184 Z6.394 E.23446 G1 X97.459 Y113.184 E.07204 ;PATH_TASK id=1842 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X97.459 Y113.184 F21000 G1 F10601.455 G1 X97.459 Y113.608 E.01497 G1 X99.5 Y113.608 E.07204 G1 X106 Y113.608 Z5.024 E.23446 G1 X109 Y113.608 E.10588 G1 X115.5 Y113.608 Z3.878 E.23295 G1 X118.5 Y113.608 E.10588 G1 X125 Y113.608 Z2.965 E.23167 G1 X128 Y113.608 E.10588 G1 X134.5 Y113.608 Z2.282 E.23068 G1 X137.5 Y113.608 E.10588 G1 X144 Y113.608 Z1.827 E.22998 G1 X147 Y113.608 E.10588 G1 X152.541 Y113.608 Z1.633 E.19569 ;PATH_TASK id=1842 conformal=1 surface=0 source_layer=7 shell_offset=0.400000 G1 X152.541 Y113.608 F21000 G1 F10601.455 G1 X152.541 Y114.033 E.015 G1 X147 Y114.033 Z1.827 E.19569 G1 X144 Y114.033 E.10588 G1 X137.5 Y114.033 Z2.282 E.22998 G1 X134.5 Y114.033 E.10588 G1 X128 Y114.033 Z2.965 E.23068 G1 X125 Y114.033 E.10588 G1 X118.5 Y114.033 Z3.878 E.23167 G1 X115.5 Y114.033 E.10588 G1 X109 Y114.033 Z5.024 E.23295 G1 X106 Y114.033 E.10588 G1 X99.5 Y114.033 Z6.394 E.23446 G1 X97.276 Y114.033 E.0785 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 ;LAYER_CHANGE ;Z:6.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;6.6 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;6.6 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1843 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 M486 S0 G1 Z7.2 F720 G1 X152.846 Y114.346 F21000 G1 Z1.823 F720 G1 E.7 F1500 ;TYPE:Inner wall ;WIDTH:0.449999 G1 F10200 G1 X147 Y114.346 Z2.027 E.198 G1 X144 Y114.346 E.10155 G1 X137.5 Y114.346 Z2.482 E.22056 G1 X134.5 Y114.346 E.10155 G1 X128 Y114.346 Z3.165 E.22123 G1 X125 Y114.346 E.10155 G1 X118.5 Y114.346 Z4.078 E.22218 G1 X115.5 Y114.346 E.10155 G1 X109 Y114.346 Z5.224 E.22341 G1 X106 Y114.346 E.10155 G1 X99.5 Y114.346 Z6.594 E.22485 G1 X97.154 Y114.346 E.07941 G1 X97.154 Y105.654 E.29421 G1 X99.5 Y105.654 E.07941 G1 X106 Y105.654 Z5.224 E.22485 G1 X109 Y105.654 E.10155 G1 X115.5 Y105.654 Z4.078 E.22341 G1 X118.5 Y105.654 E.10155 G1 X125 Y105.654 Z3.165 E.22218 G1 X128 Y105.654 E.10155 G1 X134.5 Y105.654 Z2.482 E.22123 G1 X137.5 Y105.654 E.10155 G1 X144 Y105.654 Z2.027 E.22056 G1 X147 Y105.654 E.10155 G1 X152.846 Y105.654 Z1.823 E.198 G1 X152.846 Y114.306 E.29286 ;PATH_TASK id=1844 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 M204 T3000 G1 Z2.423 F720 G1 X152.889 Y114.306 F21000 G1 X152.889 Y114.389 G1 X153.275 Y114.775 G1 Z1.808 F720 M204 P3000 ;TYPE:Outer wall G1 F10200 G1 X147 Y114.775 Z2.027 E.21253 G1 X144 Y114.775 E.10155 G1 X137.5 Y114.775 Z2.482 E.22056 G1 X134.5 Y114.775 E.10155 G1 X128 Y114.775 Z3.165 E.22123 G1 X125 Y114.775 E.10155 G1 X118.5 Y114.775 Z4.078 E.22218 G1 X115.5 Y114.775 E.10155 G1 X109 Y114.775 Z5.224 E.22341 G1 X106 Y114.775 E.10155 G1 X99.5 Y114.775 Z6.594 E.22485 G1 X96.725 Y114.775 E.09393 G1 X96.725 Y105.225 E.32326 G1 X99.5 Y105.225 E.09393 G1 X106 Y105.225 Z5.224 E.22485 G1 X109 Y105.225 E.10155 G1 X115.5 Y105.225 Z4.078 E.22341 G1 X118.5 Y105.225 E.10155 G1 X125 Y105.225 Z3.165 E.22218 G1 X128 Y105.225 E.10155 G1 X134.5 Y105.225 Z2.482 E.22123 G1 X137.5 Y105.225 E.10155 G1 X144 Y105.225 Z2.027 E.22056 G1 X147 Y105.225 E.10155 G1 X153.275 Y105.225 Z1.808 E.21253 G1 X153.275 Y114.735 E.3219 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 M204 T7000 G1 E-.7 F2700 G1 Z2.434 F720 G1 X152.889 Y114.389 F21000 G1 X152.889 Y105.611 G1 X152.541 Y105.611 G1 X152.541 Y105.776 G1 Z1.834 F720 G1 E.7 F1500 M204 P6000 ;TYPE:Internal solid infill ;WIDTH:0.45093 G1 F11029.14 G1 X152.541 Y114.041 E.2804 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X152.541 Y114.041 F21000 G1 F11029.14 G1 X152.133 Y114.041 Z1.848 E.01385 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X152.133 Y114.041 F21000 G1 F11029.14 G1 X152.133 Y105.959 E.27419 G1 X151.725 Y105.959 Z1.862 E.01385 G1 X151.725 Y114.041 E.27419 G1 X151.317 Y114.041 Z1.876 E.01385 G1 X151.317 Y105.959 E.27419 G1 X150.909 Y105.959 Z1.89 E.01385 G1 X150.909 Y114.041 E.27419 G1 X150.501 Y114.041 Z1.905 E.01385 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X150.501 Y114.041 F21000 G1 F11029.14 G1 X150.501 Y105.959 E.27419 G1 X150.093 Y105.959 Z1.919 E.01385 G1 X150.093 Y114.041 E.27419 G1 X149.685 Y114.041 Z1.933 E.01385 G1 X149.685 Y105.959 E.27419 G1 X149.277 Y105.959 Z1.947 E.01385 G1 X149.277 Y114.041 E.27419 G1 X148.869 Y114.041 Z1.962 E.01385 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X148.869 Y114.041 F21000 G1 F11029.14 G1 X148.869 Y105.959 E.27419 G1 X148.461 Y105.959 Z1.976 E.01385 G1 X148.461 Y114.041 E.27419 G1 X148.053 Y114.041 Z1.99 E.01385 G1 X148.053 Y105.959 E.27419 G1 X147.645 Y105.959 Z2.004 E.01385 G1 X147.645 Y114.041 E.27419 G1 X147.237 Y114.041 Z2.019 E.01385 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X147.237 Y114.041 F21000 G1 F11029.14 G1 X147.237 Y105.959 E.27419 G1 X147 Y105.959 Z2.027 E.00805 G1 X146.829 Y105.959 E.0058 G1 X146.829 Y114.041 E.27419 G1 X146.42 Y114.041 E.01388 G1 X146.42 Y105.959 E.27419 G1 X146.012 Y105.959 E.01384 G1 X146.012 Y114.041 E.27419 G1 X145.604 Y114.041 E.01384 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X145.604 Y114.041 F21000 G1 F11029.14 G1 X145.604 Y105.959 E.27419 G1 X145.196 Y105.959 E.01384 G1 X145.196 Y114.041 E.27419 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X145.196 Y114.041 F21000 G1 F11029.14 G1 X144.788 Y114.041 E.01384 G1 X144.788 Y105.959 E.27419 G1 X144.38 Y105.959 E.01384 G1 X144.38 Y114.041 E.27419 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X144.38 Y114.041 F21000 G1 F11029.14 G1 X144 Y114.041 E.01289 G1 X143.972 Y114.041 Z2.029 E.00095 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X143.972 Y114.041 F21000 G1 F11029.14 G1 X143.972 Y105.959 E.27419 G1 X143.564 Y105.959 Z2.057 E.01387 G1 X143.564 Y114.041 E.27419 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X143.564 Y114.041 F21000 G1 F11029.14 G1 X143.156 Y114.041 Z2.086 E.01388 G1 X143.156 Y105.959 E.27419 G1 X142.748 Y105.959 Z2.115 E.01388 G1 X142.748 Y114.041 E.27419 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X142.748 Y114.041 F21000 G1 F11029.14 G1 X142.34 Y114.041 Z2.143 E.01387 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X142.34 Y114.041 F21000 G1 F11029.14 G1 X142.34 Y105.959 E.27419 G1 X141.932 Y105.959 Z2.172 E.01388 G1 X141.932 Y114.041 E.27419 G1 X141.524 Y114.041 Z2.2 E.01387 G1 X141.524 Y105.959 E.27419 G1 X141.116 Y105.959 Z2.229 E.01388 G1 X141.116 Y114.041 E.27419 G1 X140.708 Y114.041 Z2.257 E.01387 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X140.708 Y114.041 F21000 G1 F11029.14 G1 X140.708 Y105.959 E.27419 G1 X140.3 Y105.959 Z2.286 E.01388 G1 X140.3 Y114.041 E.27419 G1 X139.892 Y114.041 Z2.314 E.01387 G1 X139.892 Y105.959 E.27419 G1 X139.484 Y105.959 Z2.343 E.01388 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X139.484 Y105.959 F21000 G1 F11029.14 G1 X139.484 Y114.041 E.27419 G1 X139.076 Y114.041 Z2.371 E.01387 G1 X139.076 Y105.959 E.27419 G1 X138.668 Y105.959 Z2.4 E.01388 G1 X138.668 Y114.041 E.27419 G1 X138.26 Y114.041 Z2.428 E.01387 G1 X138.26 Y105.959 E.27419 G1 X137.852 Y105.959 Z2.457 E.01388 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X137.852 Y105.959 F21000 G1 F11029.14 G1 X137.852 Y114.041 E.27419 G1 X137.5 Y114.041 Z2.482 E.01197 G1 X137.444 Y114.041 E.0019 G1 X137.444 Y105.959 E.27419 G1 X137.036 Y105.959 E.01384 G1 X137.036 Y114.041 E.27419 G1 X136.628 Y114.041 E.01384 G1 X136.628 Y105.959 E.27419 G1 X136.22 Y105.959 E.01384 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X136.22 Y105.959 F21000 G1 F11029.14 G1 X136.22 Y114.041 E.27419 G1 X135.812 Y114.041 E.01384 G1 X135.812 Y105.959 E.27419 G1 X135.404 Y105.959 E.01384 G1 X135.404 Y114.041 E.27419 G1 X134.996 Y114.041 E.01384 G1 X134.996 Y105.959 E.27419 G1 X134.588 Y105.959 E.01384 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X134.588 Y105.959 F21000 G1 F11029.14 G1 X134.588 Y114.041 E.27419 G1 X134.5 Y114.041 E.00299 G1 X134.18 Y114.041 Z2.515 E.01091 G1 X134.18 Y105.959 E.27419 G1 X133.772 Y105.959 Z2.558 E.01392 G1 X133.772 Y114.041 E.27419 G1 X133.364 Y114.041 Z2.601 E.01392 G1 X133.364 Y105.959 E.27419 G1 X132.956 Y105.959 Z2.644 E.01392 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X132.956 Y105.959 F21000 G1 F11029.14 G1 X132.956 Y114.041 E.27419 G1 X132.548 Y114.041 Z2.687 E.01392 G1 X132.548 Y105.959 E.27419 G1 X132.14 Y105.959 Z2.73 E.01392 G1 X132.14 Y114.041 E.27419 G1 X131.732 Y114.041 Z2.772 E.01392 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X131.732 Y114.041 F21000 G1 F11029.14 G1 X131.732 Y105.959 E.27419 G1 X131.324 Y105.959 Z2.815 E.01392 G1 X131.324 Y114.041 E.27419 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X131.324 Y114.041 F21000 G1 F11029.14 G1 X130.916 Y114.041 Z2.858 E.01392 G1 X130.916 Y105.959 E.27419 G1 X130.508 Y105.959 Z2.901 E.01392 G1 X130.508 Y114.041 E.27419 G1 X130.1 Y114.041 Z2.944 E.01392 G1 X130.1 Y105.959 E.27419 G1 X129.692 Y105.959 Z2.987 E.01392 G1 X129.692 Y114.041 E.27419 G1 X129.284 Y114.041 Z3.03 E.01392 G1 X129.284 Y105.959 E.27419 G1 X128.876 Y105.959 Z3.073 E.01392 G1 X128.876 Y114.041 E.27419 G1 X128.468 Y114.041 Z3.115 E.01392 G1 X128.468 Y105.959 E.27419 G1 X128.06 Y105.959 Z3.158 E.01392 G1 X128.06 Y114.041 E.27419 G1 X128 Y114.041 Z3.165 E.00205 G1 X127.652 Y114.041 E.01181 G1 X127.652 Y105.959 E.27419 G1 X127.244 Y105.959 E.01384 G1 X127.244 Y114.041 E.27419 G1 X126.836 Y114.041 E.01384 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X126.836 Y114.041 F21000 G1 F11029.14 G1 X126.836 Y105.959 E.27419 G1 X126.428 Y105.959 E.01384 G1 X126.428 Y114.041 E.27419 G1 X126.02 Y114.041 E.01384 G1 X126.02 Y105.959 E.27419 G1 X125.612 Y105.959 E.01384 G1 X125.612 Y114.041 E.27419 G1 X125.204 Y114.041 E.01384 G1 X125.204 Y105.959 E.27419 G1 X125 Y105.959 E.00692 G1 X124.796 Y105.959 Z3.193 E.00699 G1 X124.796 Y114.041 E.27419 G1 X124.388 Y114.041 Z3.251 E.01398 G1 X124.388 Y105.959 E.27419 G1 X123.98 Y105.959 Z3.308 E.01398 G1 X123.98 Y114.041 E.27419 G1 X123.572 Y114.041 Z3.365 E.01398 G1 X123.572 Y105.959 E.27419 G1 X123.164 Y105.959 Z3.423 E.01398 G1 X123.164 Y114.041 E.27419 G1 X122.756 Y114.041 Z3.48 E.01398 G1 X122.756 Y105.959 E.27419 G1 X122.348 Y105.959 Z3.537 E.01398 G1 X122.348 Y114.041 E.27419 G1 X121.94 Y114.041 Z3.595 E.01398 G1 X121.94 Y105.959 E.27419 G1 X121.532 Y105.959 Z3.652 E.01398 G1 X121.532 Y114.041 E.27419 G1 X121.124 Y114.041 Z3.709 E.01398 G1 X121.124 Y105.959 E.27419 G1 X120.716 Y105.959 Z3.767 E.01398 G1 X120.716 Y114.041 E.27419 G1 X120.308 Y114.041 Z3.824 E.01398 G1 X120.308 Y105.959 E.27419 G1 X119.9 Y105.959 Z3.881 E.01398 G1 X119.9 Y114.041 E.27419 G1 X119.492 Y114.041 Z3.939 E.01398 G1 X119.492 Y105.959 E.27419 G1 X119.084 Y105.959 Z3.996 E.01398 G1 X119.084 Y114.041 E.27419 G1 X118.676 Y114.041 Z4.053 E.01398 G1 X118.676 Y105.959 E.27419 G1 X118.5 Y105.959 Z4.078 E.00603 G1 X118.268 Y105.959 E.00787 G1 X118.268 Y114.041 E.27419 G1 X117.86 Y114.041 E.01384 G1 X117.86 Y105.959 E.27419 G1 X117.452 Y105.959 E.01384 G1 X117.452 Y114.041 E.27419 G1 X117.044 Y114.041 E.01384 G1 X117.044 Y105.959 E.27419 G1 X116.636 Y105.959 E.01384 G1 X116.636 Y114.041 E.27419 G1 X116.228 Y114.041 E.01384 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X116.228 Y114.041 F21000 G1 F11029.14 G1 X116.228 Y105.959 E.27419 G1 X115.82 Y105.959 E.01384 G1 X115.82 Y114.041 E.27419 G1 X115.5 Y114.041 E.01086 G1 X115.412 Y114.041 Z4.094 E.00303 G1 X115.412 Y105.959 E.27419 G1 X115.004 Y105.959 Z4.166 E.01406 G1 X115.004 Y114.041 E.27419 G1 X114.596 Y114.041 Z4.238 E.01406 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X114.596 Y114.041 F21000 G1 F11029.14 G1 X114.596 Y105.959 E.27419 G1 X114.188 Y105.959 Z4.31 E.01406 G1 X114.188 Y114.041 E.27419 G1 X113.78 Y114.041 Z4.382 E.01406 G1 X113.78 Y105.959 E.27419 G1 X113.372 Y105.959 Z4.453 E.01405 G1 X113.372 Y114.041 E.27419 G1 X112.964 Y114.041 Z4.525 E.01406 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X112.964 Y114.041 F21000 G1 F11029.14 G1 X112.964 Y105.959 E.27419 G1 X112.556 Y105.959 Z4.597 E.01406 G1 X112.556 Y114.041 E.27419 G1 X112.148 Y114.041 Z4.669 E.01406 G1 X112.148 Y105.959 E.27419 G1 X111.74 Y105.959 Z4.741 E.01406 G1 X111.74 Y114.041 E.27419 G1 X111.332 Y114.041 Z4.813 E.01406 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X111.332 Y114.041 F21000 G1 F11029.14 G1 X111.332 Y105.959 E.27419 G1 X110.924 Y105.959 Z4.885 E.01406 G1 X110.924 Y114.041 E.27419 G1 X110.516 Y114.041 Z4.957 E.01406 G1 X110.516 Y105.959 E.27419 G1 X110.108 Y105.959 Z5.029 E.01406 G1 X110.108 Y114.041 E.27419 G1 X109.7 Y114.041 Z5.101 E.01406 ;PATH_TASK id=1845 conformal=1 surface=0 source_layer=8 shell_offset=0.200000 G1 X109.7 Y114.041 F21000 G1 F11029.14 G1 X109.7 Y105.959 E.27419 G1 X109.292 Y105.959 Z5.173 E.01406 G1 X109.292 Y114.041 E.27419 G1 X109 Y114.041 Z5.224 E.01006 G1 X108.884 Y114.041 E.00394 G1 X108.884 Y105.959 E.27419 G1 X108.476 Y105.959 E.01384 G1 X108.476 Y114.041 E.27419 G1 X108.068 Y114.041 E.01384 G1 X108.068 Y105.959 E.27419 G1 X107.66 Y105.959 E.01384 G1 X107.66 Y114.041 E.27419 G1 X107.252 Y114.041 E.01384 G1 X107.252 Y105.959 E.27419 G1 X106.844 Y105.959 E.01384 G1 X106.844 Y114.041 E.27419 G1 X106.436 Y114.041 E.01384 G1 X106.436 Y105.959 E.27419 G1 X106.028 Y105.959 E.01384 G1 X106.028 Y114.041 E.27419 G1 X106 Y114.041 E.00095 G1 X105.619 Y114.041 Z5.305 E.01321 G1 X105.619 Y105.959 E.27419 G1 X105.211 Y105.959 Z5.39 E.01414 G1 X105.211 Y114.041 E.27419 G1 X104.803 Y114.041 Z5.476 E.01415 G1 X104.803 Y105.959 E.27419 G1 X104.395 Y105.959 Z5.562 E.01415 G1 X104.395 Y114.041 E.27419 G1 X103.987 Y114.041 Z5.648 E.01415 G1 X103.987 Y105.959 E.27419 G1 X103.579 Y105.959 Z5.734 E.01415 G1 X103.579 Y114.041 E.27419 G1 X103.171 Y114.041 Z5.82 E.01415 G1 X103.171 Y105.959 E.27419 G1 X102.763 Y105.959 Z5.906 E.01415 G1 X102.763 Y114.041 E.27419 G1 X102.355 Y114.041 Z5.992 E.01415 G1 X102.355 Y105.959 E.27419 G1 X101.947 Y105.959 Z6.078 E.01415 G1 X101.947 Y114.041 E.27419 G1 X101.539 Y114.041 Z6.164 E.01415 G1 X101.539 Y105.959 E.27419 G1 X101.131 Y105.959 Z6.25 E.01415 G1 X101.131 Y114.041 E.27419 G1 X100.723 Y114.041 Z6.336 E.01415 G1 X100.723 Y105.959 E.27419 G1 X100.315 Y105.959 Z6.422 E.01415 G1 X100.315 Y114.041 E.27419 G1 X99.907 Y114.041 Z6.508 E.01415 G1 X99.907 Y105.959 E.27419 G1 X99.5 Y105.959 Z6.594 E.01411 G1 X99.499 Y114.041 E.27419 G1 X99.091 Y114.041 E.01384 G1 X99.091 Y105.959 E.27419 G1 X98.683 Y105.959 E.01384 G1 X98.683 Y114.041 E.27419 G1 X98.275 Y114.041 E.01384 G1 X98.275 Y105.959 E.27419 G1 X97.867 Y105.959 E.01384 G1 X97.867 Y114.041 E.27419 G1 X97.459 Y114.041 E.01384 G1 X97.459 Y105.776 E.2804 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 M106 S245 ;LAYER_CHANGE ;Z:6.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE G92 E0.0 ;6.8 G1 E-.7 F2700 M486 S-1 ;AFTER_LAYER_CHANGE ;6.8 ;_SET_FAN_SPEED_CHANGING_LAYER ; printing object angle-test-v1.3-A.stl id:0 copy 0 ;PATH_TASK id=1846 conformal=1 surface=0 source_layer=9 shell_offset=0.000000 M486 S0 G1 Z7.4 F720 G1 X153.275 Y114.775 F21000 G1 Z2.008 F720 G1 E.7 F1500 M204 P3000 ;TYPE:Outer wall ;WIDTH:0.449999 G1 F10200 G1 X147 Y114.775 Z2.227 E.21253 G1 X144 Y114.775 E.10155 G1 X137.5 Y114.775 Z2.682 E.22056 G1 X134.5 Y114.775 E.10155 G1 X128 Y114.775 Z3.365 E.22123 G1 X125 Y114.775 E.10155 G1 X118.5 Y114.775 Z4.278 E.22218 G1 X115.5 Y114.775 E.10155 G1 X109 Y114.775 Z5.424 E.22341 G1 X106 Y114.775 E.10155 G1 X99.5 Y114.775 Z6.794 E.22485 G1 X96.725 Y114.775 E.09393 G1 X96.725 Y105.225 E.32326 G1 X99.5 Y105.225 E.09393 G1 X106 Y105.225 Z5.424 E.22485 G1 X109 Y105.225 E.10155 G1 X115.5 Y105.225 Z4.278 E.22341 G1 X118.5 Y105.225 E.10155 G1 X125 Y105.225 Z3.365 E.22218 G1 X128 Y105.225 E.10155 G1 X134.5 Y105.225 Z2.682 E.22123 G1 X137.5 Y105.225 E.10155 G1 X144 Y105.225 Z2.227 E.22056 G1 X147 Y105.225 E.10155 G1 X153.275 Y105.225 Z2.008 E.21253 G1 X153.275 Y114.735 E.3219 ;PATH_TASK id=1847 conformal=1 surface=0 source_layer=9 shell_offset=0.000000 G1 E-.7 F2700 G1 Z7.394 F720 G1 X96.846 Y105.522 F21000 G1 Z6.794 F720 G1 E.7 F1500 M204 P2000 ;TYPE:Top surface ;WIDTH:0.432356 G1 F6000 G1 X99.5 Y105.522 E.08594 G1 X106 Y105.522 Z5.424 E.21511 G1 X109 Y105.522 E.09715 G1 X115.5 Y105.522 Z4.278 E.21373 G1 X118.5 Y105.522 E.09715 G1 X125 Y105.522 Z3.365 E.21255 G1 X128 Y105.522 E.09715 G1 X134.5 Y105.522 Z2.682 E.21164 G1 X137.5 Y105.522 E.09715 G1 X144 Y105.522 Z2.227 E.211 G1 X147 Y105.522 E.09715 G1 X152.985 Y105.522 Z2.018 E.19392 ;PATH_TASK id=1847 conformal=1 surface=0 source_layer=9 shell_offset=0.000000 G1 X152.985 Y105.522 F21000 M73 P99 R0 G1 F6000 G1 X152.985 Y105.911 E.0126 G1 X147 Y105.911 Z2.227 E.19392 G1 X144 Y105.911 E.09715 G1 X137.5 Y105.911 Z2.682 E.211 G1 X134.5 Y105.911 E.09715 G1 X128 Y105.911 Z3.365 E.21164 G1 X125 Y105.911 E.09715 G1 X118.5 Y105.911 Z4.278 E.21255 G1 X115.5 Y105.911 E.09715 G1 X109 Y105.911 Z5.424 E.21373 G1 X106 Y105.911 E.09715 G1 X99.5 Y105.911 Z6.794 E.21511 G1 X97.015 Y105.911 E.08047 ;PATH_TASK id=1847 conformal=1 surface=0 source_layer=9 shell_offset=0.000000 G1 X97.015 Y105.911 F21000 G1 F6000 G1 X97.015 Y106.3 E.0126 G1 X99.5 Y106.3 E.08047 G1 X106 Y106.3 Z5.424 E.21511 G1 X109 Y106.3 E.09715 G1 X115.5 Y106.3 Z4.278 E.21373 G1 X118.5 Y106.3 E.09715 G1 X125 Y106.3 Z3.365 E.21255 G1 X128 Y106.3 E.09715 G1 X134.5 Y106.3 Z2.682 E.21164 G1 X137.5 Y106.3 E.09715 G1 X144 Y106.3 Z2.227 E.211 G1 X147 Y106.3 E.09715 G1 X152.985 Y106.3 Z2.018 E.19392 G1 X152.985 Y106.69 E.01263 G1 X147 Y106.69 Z2.227 E.19392 G1 X144 Y106.69 E.09715 G1 X137.5 Y106.69 Z2.682 E.211 G1 X134.5 Y106.69 E.09715 G1 X128 Y106.69 Z3.365 E.21164 G1 X125 Y106.69 E.09715 G1 X118.5 Y106.69 Z4.278 E.21255 G1 X115.5 Y106.69 E.09715 G1 X109 Y106.69 Z5.424 E.21373 G1 X106 Y106.69 E.09715 G1 X99.5 Y106.69 Z6.794 E.21511 G1 X97.015 Y106.69 E.08047 G1 X97.015 Y107.079 E.0126 G1 X99.5 Y107.079 E.08047 G1 X106 Y107.079 Z5.424 E.21511 G1 X109 Y107.079 E.09715 G1 X115.5 Y107.079 Z4.278 E.21373 G1 X118.5 Y107.079 E.09715 G1 X125 Y107.079 Z3.365 E.21255 G1 X128 Y107.079 E.09715 G1 X134.5 Y107.079 Z2.682 E.21164 G1 X137.5 Y107.079 E.09715 G1 X144 Y107.079 Z2.227 E.211 G1 X147 Y107.079 E.09715 G1 X152.985 Y107.079 Z2.018 E.19392 G1 X152.985 Y107.469 E.01263 G1 X147 Y107.469 Z2.227 E.19392 G1 X144 Y107.469 E.09715 G1 X137.5 Y107.469 Z2.682 E.211 G1 X134.5 Y107.469 E.09715 G1 X128 Y107.469 Z3.365 E.21164 G1 X125 Y107.469 E.09715 G1 X118.5 Y107.469 Z4.278 E.21255 G1 X115.5 Y107.469 E.09715 G1 X109 Y107.469 Z5.424 E.21373 G1 X106 Y107.469 E.09715 G1 X99.5 Y107.469 Z6.794 E.21511 G1 X97.015 Y107.469 E.08047 G1 X97.015 Y107.858 E.0126 G1 X99.5 Y107.858 E.08047 G1 X106 Y107.858 Z5.424 E.21511 G1 X109 Y107.858 E.09715 G1 X115.5 Y107.858 Z4.278 E.21373 G1 X118.5 Y107.858 E.09715 G1 X125 Y107.858 Z3.365 E.21255 G1 X128 Y107.858 E.09715 G1 X134.5 Y107.858 Z2.682 E.21164 G1 X137.5 Y107.858 E.09715 G1 X144 Y107.858 Z2.227 E.211 G1 X147 Y107.858 E.09715 G1 X152.985 Y107.858 Z2.018 E.19392 G1 X152.985 Y108.248 E.01263 G1 X147 Y108.248 Z2.227 E.19392 G1 X144 Y108.248 E.09715 G1 X137.5 Y108.248 Z2.682 E.211 G1 X134.5 Y108.248 E.09715 G1 X128 Y108.248 Z3.365 E.21164 G1 X125 Y108.248 E.09715 G1 X118.5 Y108.248 Z4.278 E.21255 G1 X115.5 Y108.248 E.09715 G1 X109 Y108.248 Z5.424 E.21373 G1 X106 Y108.248 E.09715 G1 X99.5 Y108.248 Z6.794 E.21511 G1 X97.015 Y108.248 E.08047 G1 X97.015 Y108.637 E.0126 ;PATH_TASK id=1847 conformal=1 surface=0 source_layer=9 shell_offset=0.000000 G1 X97.015 Y108.637 F21000 G1 F6000 G1 X99.5 Y108.637 E.08047 G1 X106 Y108.637 Z5.424 E.21511 G1 X109 Y108.637 E.09715 G1 X115.5 Y108.637 Z4.278 E.21373 G1 X118.5 Y108.637 E.09715 G1 X125 Y108.637 Z3.365 E.21255 G1 X128 Y108.637 E.09715 G1 X134.5 Y108.637 Z2.682 E.21164 G1 X137.5 Y108.637 E.09715 G1 X144 Y108.637 Z2.227 E.211 G1 X147 Y108.637 E.09715 G1 X152.985 Y108.637 Z2.018 E.19392 G1 X152.985 Y109.026 E.0126 G1 X147 Y109.026 Z2.227 E.19392 G1 X144 Y109.026 E.09715 G1 X137.5 Y109.026 Z2.682 E.211 G1 X134.5 Y109.026 E.09715 G1 X128 Y109.026 Z3.365 E.21164 G1 X125 Y109.026 E.09715 G1 X118.5 Y109.026 Z4.278 E.21255 G1 X115.5 Y109.026 E.09715 G1 X109 Y109.026 Z5.424 E.21373 G1 X106 Y109.026 E.09715 G1 X99.5 Y109.026 Z6.794 E.21511 G1 X97.015 Y109.026 E.08047 G1 X97.015 Y109.416 E.01263 ;PATH_TASK id=1847 conformal=1 surface=0 source_layer=9 shell_offset=0.000000 G1 X97.015 Y109.416 F21000 G1 F6000 G1 X99.5 Y109.416 E.08047 G1 X106 Y109.416 Z5.424 E.21511 G1 X109 Y109.416 E.09715 G1 X115.5 Y109.416 Z4.278 E.21373 G1 X118.5 Y109.416 E.09715 G1 X125 Y109.416 Z3.365 E.21255 G1 X128 Y109.416 E.09715 G1 X134.5 Y109.416 Z2.682 E.21164 G1 X137.5 Y109.416 E.09715 G1 X144 Y109.416 Z2.227 E.211 G1 X147 Y109.416 E.09715 G1 X152.985 Y109.416 Z2.018 E.19392 G1 X152.985 Y109.805 E.0126 ;PATH_TASK id=1847 conformal=1 surface=0 source_layer=9 shell_offset=0.000000 G1 X152.985 Y109.805 F21000 G1 F6000 G1 X147 Y109.805 Z2.227 E.19392 G1 X144 Y109.805 E.09715 G1 X137.5 Y109.805 Z2.682 E.211 G1 X134.5 Y109.805 E.09715 G1 X128 Y109.805 Z3.365 E.21164 G1 X125 Y109.805 E.09715 G1 X118.5 Y109.805 Z4.278 E.21255 G1 X115.5 Y109.805 E.09715 G1 X109 Y109.805 Z5.424 E.21373 G1 X106 Y109.805 E.09715 G1 X99.5 Y109.805 Z6.794 E.21511 G1 X97.015 Y109.805 E.08047 G1 X97.015 Y110.195 E.01263 G1 X99.5 Y110.195 E.08047 G1 X106 Y110.195 Z5.424 E.21511 G1 X109 Y110.195 E.09715 G1 X115.5 Y110.195 Z4.278 E.21373 G1 X118.5 Y110.195 E.09715 G1 X125 Y110.195 Z3.365 E.21255 G1 X128 Y110.195 E.09715 G1 X134.5 Y110.195 Z2.682 E.21164 G1 X137.5 Y110.195 E.09715 G1 X144 Y110.195 Z2.227 E.211 G1 X147 Y110.195 E.09715 G1 X152.985 Y110.195 Z2.018 E.19392 G1 X152.985 Y110.584 E.0126 G1 X147 Y110.584 Z2.227 E.19392 G1 X144 Y110.584 E.09715 G1 X137.5 Y110.584 Z2.682 E.211 G1 X134.5 Y110.584 E.09715 G1 X128 Y110.584 Z3.365 E.21164 G1 X125 Y110.584 E.09715 G1 X118.5 Y110.584 Z4.278 E.21255 G1 X115.5 Y110.584 E.09715 G1 X109 Y110.584 Z5.424 E.21373 G1 X106 Y110.584 E.09715 G1 X99.5 Y110.584 Z6.794 E.21511 G1 X97.015 Y110.584 E.08047 G1 X97.015 Y110.974 E.01263 G1 X99.5 Y110.974 E.08047 G1 X106 Y110.974 Z5.424 E.21511 G1 X109 Y110.974 E.09715 G1 X115.5 Y110.974 Z4.278 E.21373 G1 X118.5 Y110.974 E.09715 G1 X125 Y110.974 Z3.365 E.21255 G1 X128 Y110.974 E.09715 G1 X134.5 Y110.974 Z2.682 E.21164 G1 X137.5 Y110.974 E.09715 G1 X144 Y110.974 Z2.227 E.211 G1 X147 Y110.974 E.09715 G1 X152.985 Y110.974 Z2.018 E.19392 G1 X152.985 Y111.363 E.0126 G1 X147 Y111.363 Z2.227 E.19392 G1 X144 Y111.363 E.09715 G1 X137.5 Y111.363 Z2.682 E.211 G1 X134.5 Y111.363 E.09715 G1 X128 Y111.363 Z3.365 E.21164 G1 X125 Y111.363 E.09715 G1 X118.5 Y111.363 Z4.278 E.21255 G1 X115.5 Y111.363 E.09715 G1 X109 Y111.363 Z5.424 E.21373 G1 X106 Y111.363 E.09715 G1 X99.5 Y111.363 Z6.794 E.21511 G1 X97.015 Y111.363 E.08047 G1 X97.015 Y111.753 E.01263 ;PATH_TASK id=1847 conformal=1 surface=0 source_layer=9 shell_offset=0.000000 G1 X97.015 Y111.753 F21000 G1 F6000 G1 X99.5 Y111.753 E.08047 G1 X106 Y111.753 Z5.424 E.21511 G1 X109 Y111.753 E.09715 G1 X115.5 Y111.753 Z4.278 E.21373 G1 X118.5 Y111.753 E.09715 G1 X125 Y111.753 Z3.365 E.21255 G1 X128 Y111.753 E.09715 G1 X134.5 Y111.753 Z2.682 E.21164 G1 X137.5 Y111.753 E.09715 G1 X144 Y111.753 Z2.227 E.211 G1 X147 Y111.753 E.09715 G1 X152.985 Y111.753 Z2.018 E.19392 G1 X152.985 Y112.142 E.0126 G1 X147 Y112.142 Z2.227 E.19392 G1 X144 Y112.142 E.09715 G1 X137.5 Y112.142 Z2.682 E.211 G1 X134.5 Y112.142 E.09715 G1 X128 Y112.142 Z3.365 E.21164 G1 X125 Y112.142 E.09715 G1 X118.5 Y112.142 Z4.278 E.21255 G1 X115.5 Y112.142 E.09715 G1 X109 Y112.142 Z5.424 E.21373 G1 X106 Y112.142 E.09715 G1 X99.5 Y112.142 Z6.794 E.21511 G1 X97.015 Y112.142 E.08047 G1 X97.015 Y112.531 E.0126 G1 X99.5 Y112.531 E.08047 G1 X106 Y112.531 Z5.424 E.21511 G1 X109 Y112.531 E.09715 G1 X115.5 Y112.531 Z4.278 E.21373 G1 X118.5 Y112.531 E.09715 G1 X125 Y112.531 Z3.365 E.21255 G1 X128 Y112.531 E.09715 G1 X134.5 Y112.531 Z2.682 E.21164 G1 X137.5 Y112.531 E.09715 G1 X144 Y112.531 Z2.227 E.211 G1 X147 Y112.531 E.09715 G1 X152.985 Y112.531 Z2.018 E.19392 G1 X152.985 Y112.921 E.01263 G1 X147 Y112.921 Z2.227 E.19392 G1 X144 Y112.921 E.09715 G1 X137.5 Y112.921 Z2.682 E.211 G1 X134.5 Y112.921 E.09715 G1 X128 Y112.921 Z3.365 E.21164 G1 X125 Y112.921 E.09715 G1 X118.5 Y112.921 Z4.278 E.21255 G1 X115.5 Y112.921 E.09715 G1 X109 Y112.921 Z5.424 E.21373 G1 X106 Y112.921 E.09715 G1 X99.5 Y112.921 Z6.794 E.21511 G1 X97.015 Y112.921 E.08047 G1 X97.015 Y113.31 E.0126 G1 X99.5 Y113.31 E.08047 G1 X106 Y113.31 Z5.424 E.21511 G1 X109 Y113.31 E.09715 G1 X115.5 Y113.31 Z4.278 E.21373 G1 X118.5 Y113.31 E.09715 G1 X125 Y113.31 Z3.365 E.21255 G1 X128 Y113.31 E.09715 G1 X134.5 Y113.31 Z2.682 E.21164 G1 X137.5 Y113.31 E.09715 G1 X144 Y113.31 Z2.227 E.211 G1 X147 Y113.31 E.09715 G1 X152.985 Y113.31 Z2.018 E.19392 G1 X152.985 Y113.7 E.01263 ;PATH_TASK id=1847 conformal=1 surface=0 source_layer=9 shell_offset=0.000000 G1 X152.985 Y113.7 F21000 G1 F6000 G1 X147 Y113.7 Z2.227 E.19392 G1 X144 Y113.7 E.09715 G1 X137.5 Y113.7 Z2.682 E.211 G1 X134.5 Y113.7 E.09715 G1 X128 Y113.7 Z3.365 E.21164 G1 X125 Y113.7 E.09715 G1 X118.5 Y113.7 Z4.278 E.21255 G1 X115.5 Y113.7 E.09715 G1 X109 Y113.7 Z5.424 E.21373 G1 X106 Y113.7 E.09715 G1 X99.5 Y113.7 Z6.794 E.21511 G1 X97.015 Y113.7 E.08047 G1 X97.015 Y114.089 E.0126 G1 X99.5 Y114.089 E.08047 G1 X106 Y114.089 Z5.424 E.21511 G1 X109 Y114.089 E.09715 G1 X115.5 Y114.089 Z4.278 E.21373 G1 X118.5 Y114.089 E.09715 G1 X125 Y114.089 Z3.365 E.21255 G1 X128 Y114.089 E.09715 G1 X134.5 Y114.089 Z2.682 E.21164 G1 X137.5 Y114.089 E.09715 G1 X144 Y114.089 Z2.227 E.211 G1 X147 Y114.089 E.09715 G1 X152.985 Y114.089 Z2.018 E.19392 ;PATH_TASK id=1847 conformal=1 surface=0 source_layer=9 shell_offset=0.000000 G1 X152.985 Y114.089 F21000 G1 F6000 G1 X152.985 Y114.479 E.01263 ;PATH_TASK id=1847 conformal=1 surface=0 source_layer=9 shell_offset=0.000000 G1 X152.985 Y114.479 F21000 G1 F6000 G1 X147 Y114.479 Z2.227 E.19392 G1 X144 Y114.479 E.09715 G1 X137.5 Y114.479 Z2.682 E.211 G1 X134.5 Y114.479 E.09715 G1 X128 Y114.479 Z3.365 E.21164 G1 X125 Y114.479 E.09715 G1 X118.5 Y114.479 Z4.278 E.21255 G1 X115.5 Y114.479 E.09715 G1 X109 Y114.479 Z5.424 E.21373 G1 X106 Y114.479 E.09715 G1 X99.5 Y114.479 Z6.794 E.21511 G1 X96.846 Y114.479 E.08594 ; stop printing object angle-test-v1.3-A.stl id:0 copy 0 G1 E-.7 F2700 M486 S-1 M106 S0 ;TYPE:Custom ; Filament-specific end gcode G1 Z7.8 F720 ; move print head up G1 E-1 F2400 ; additional retraction M104 S0 ; turn off temperature M140 S0 ; turn off heatbed M141 S0 ; disable chamber control M107 ; turn off fan G1 X242 Y-9 F10200 ; park G4 ; wait M572 S0 ; reset PA M84 X Y E ; disable motors ; max_layer_z = 6.8 M73 P100 R0 ; EXECUTABLE_BLOCK_END ; filament used [mm] = 682.54 ; filament used [cm3] = 1.64 ; filament used [g] = 2.04 ; filament cost = 0.05 ; total filament used [g] = 2.04 ; total filament cost = 0.05 ; total layers count = 34 ; estimated printing time (normal mode) = 38m 39s ; estimated first layer printing time (normal mode) = 30m 32s ; CONFIG_BLOCK_START ; accel_to_decel_enable = 1 ; accel_to_decel_factor = 50% ; activate_air_filtration = 0 ; activate_air_filtration_during_print = 1 ; activate_air_filtration_on_completion = 1 ; activate_chamber_temp_control = 0 ; adaptive_bed_mesh_margin = 0 ; adaptive_pressure_advance = 0 ; adaptive_pressure_advance_bridges = 0 ; adaptive_pressure_advance_model = "0,0,0\n0,0,0" ; adaptive_pressure_advance_overhangs = 0 ; additional_cooling_fan_speed = 70 ; additional_fan_full_speed_layer = 0 ; align_infill_direction_to_model = 0 ; alternate_extra_wall = 0 ; auxiliary_fan = 0 ; bbl_calib_mark_logo = 1 ; bed_custom_model = ; bed_custom_texture = ; bed_exclude_area = 0x0 ; bed_mesh_max = 99999,99999 ; bed_mesh_min = -99999,-99999 ; bed_mesh_probe_distance = 50,50 ; bed_temperature_formula = by_highest_temp ; before_layer_change_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n{if layer_z > 150}\nM201 X{interpolate_table(layer_z, (0,7000), (150,7000), (200,4000), (270,2000))} Y{interpolate_table(layer_z, (0,7000), (150,7000), (200,4000), (270,2000))}\n{endif}\n ; best_object_pos = 0.5,0.5 ; bottom_shell_layers = 3 ; bottom_shell_thickness = 0.5 ; bottom_solid_infill_flow_ratio = 1 ; bottom_surface_density = 100% ; bottom_surface_filament_id = 0 ; bottom_surface_pattern = monotonic ; bridge_acceleration = 1500 ; bridge_angle = 0 ; bridge_density = 100% ; bridge_flow = 1 ; bridge_line_width = 100% ; bridge_no_support = 0 ; bridge_speed = 50 ; brim_ears_detection_length = 1 ; brim_ears_max_angle = 125 ; brim_flow_ratio = 1 ; brim_object_gap = 0.1 ; brim_type = no_brim ; brim_use_efc_outline = 0 ; brim_width = 5 ; calib_flowrate_topinfill_special_order = 0 ; chamber_minimal_temperature = 0 ; chamber_temperature = 20 ; change_extrusion_role_gcode = ; change_filament_gcode = M600\nG1 E0.3 F1500 ; prime after color change ; close_additional_fan_first_x_layers = 1 ; close_fan_the_first_x_layers = 1 ; combine_brims = 0 ; complete_print_exhaust_fan_speed = 80 ; cool_plate_temp = 35 ; cool_plate_temp_initial_layer = 35 ; cooling_tube_length = 5 ; cooling_tube_retraction = 91.5 ; counterbore_hole_bridging = none ; curr_bed_type = Cool Plate ; default_acceleration = 3000 ; default_filament_colour = "" ; default_filament_profile = "Prusament PLA @CORE One" ; default_jerk = 0 ; default_junction_deviation = 0 ; default_print_profile = 0.20mm SPEED @CORE One 0.4 ; deretraction_speed = 25 ; detect_narrow_internal_solid_infill = 1 ; detect_overhang_wall = 1 ; detect_thin_wall = 0 ; different_settings_to_system = ;; ; disable_m73 = 0 ; dont_filter_internal_bridges = disabled ; dont_slow_down_outer_wall = 0 ; draft_shield = disabled ; during_print_exhaust_fan_speed = 60 ; elefant_foot_compensation = 0.2 ; elefant_foot_compensation_layers = 1 ; elefant_foot_layers_density = 100% ; emit_machine_limits_to_gcode = 1 ; enable_arc_fitting = 1 ; enable_extra_bridge_layer = disabled ; enable_filament_ramming = 1 ; enable_long_retraction_when_cut = 0 ; enable_overhang_bridge_fan = 1 ; enable_overhang_speed = 1 ; enable_power_loss_recovery = printer_configuration ; enable_pressure_advance = 0 ; enable_prime_tower = 0 ; enable_support = 0 ; enable_tower_interface_cooldown_during_tower = 0 ; enable_tower_interface_features = 0 ; enable_wrapping_detection = 0 ; enforce_support_layers = 0 ; eng_plate_temp = 0 ; eng_plate_temp_initial_layer = 0 ; ensure_vertical_shell_thickness = ensure_all ; exclude_object = 1 ; extra_loading_move = -2 ; extra_perimeters_on_overhangs = 0 ; extra_solid_infills = ; extruder_ams_count = ; extruder_clearance_height_to_lid = 50 ; extruder_clearance_height_to_rod = 33 ; extruder_clearance_radius = 75 ; extruder_colour = #F2754E ; extruder_offset = 0x0 ; extruder_printable_area = ; extruder_printable_height = 0 ; extruder_type = Direct Drive ; extrusion_rate_smoothing_external_perimeter_only = 0 ; fan_cooling_layer_time = 40 ; fan_kickstart = 0 ; fan_max_speed = 100 ; fan_min_speed = 85 ; fan_speedup_overhangs = 1 ; fan_speedup_time = 0 ; filament_adaptive_volumetric_speed = 0 ; filament_adhesiveness_category = 0 ; filament_change_extrusion_role_gcode = "" ; filament_change_length = 10 ; filament_colour = #F2754E ; filament_cooling_before_tower = 10 ; filament_cooling_final_speed = 3.4 ; filament_cooling_initial_speed = 2.2 ; filament_cooling_moves = 4 ; filament_cost = 25.4 ; filament_density = 1.24 ; filament_diameter = 1.75 ; filament_end_gcode = "; Filament-specific end gcode" ; filament_extruder_variant = "Direct Drive Standard" ; filament_flow_ratio = 1 ; filament_flush_temp = 0 ; filament_flush_volumetric_speed = 0 ; filament_ids = "Prusa Generic PLA @CORE One" ; filament_is_support = 0 ; filament_loading_speed = 28 ; filament_loading_speed_start = 3 ; filament_map = 1 ; filament_map_mode = Auto For Flush ; filament_max_volumetric_speed = 15 ; filament_minimal_purge_on_wipe_tower = 15 ; filament_multitool_ramming = 0 ; filament_multitool_ramming_flow = 10 ; filament_multitool_ramming_volume = 10 ; filament_notes = "" ; filament_printable = 3 ; filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ; filament_self_index = 1 ; filament_settings_id = "NP filament CORE-One" ; filament_shrink = 100% ; filament_shrinkage_compensation_z = 100% ; filament_soluble = 0 ; filament_stamping_distance = 0 ; filament_stamping_loading_speed = 0 ; filament_start_gcode = "M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.07{elsif nozzle_diameter[filament_extruder_id]==0.35}0.06{elsif nozzle_diameter[filament_extruder_id]==0.6}0.03{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One|CORE One L).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp" ; filament_toolchange_delay = 0 ; filament_tower_interface_pre_extrusion_dist = 10 ; filament_tower_interface_pre_extrusion_length = 0 ; filament_tower_interface_print_temp = -1 ; filament_tower_interface_purge_volume = 20 ; filament_tower_ironing_area = 4 ; filament_type = PLA ; filament_unloading_speed = 90 ; filament_unloading_speed_start = 100 ; filament_vendor = Generic ; filament_z_hop = 0.6 ; filament_z_hop_types = Slope Lift ; file_start_gcode = ; filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode ; fill_multiline = 1 ; filter_out_gap_fill = 0 ; first_layer_flow_ratio = 1 ; first_layer_print_sequence = 0 ; first_x_layer_fan_speed = 0 ; flush_into_infill = 0 ; flush_into_objects = 0 ; flush_into_support = 1 ; flush_multiplier = 0.3 ; flush_volumes_matrix = 0,280,280,280,280,0,280,280,280,280,0,280,280,280,280,0 ; flush_volumes_vector = 140,140,140,140,140,140,140,140 ; full_fan_speed_layer = 3 ; fuzzy_skin = disabled_fuzzy ; fuzzy_skin_first_layer = 0 ; fuzzy_skin_layers_between_ripple_offset = 1 ; fuzzy_skin_mode = displacement ; fuzzy_skin_noise_type = classic ; fuzzy_skin_octaves = 4 ; fuzzy_skin_persistence = 0.5 ; fuzzy_skin_point_distance = 0.3 ; fuzzy_skin_ripple_offset = 50% ; fuzzy_skin_ripples_per_layer = 15 ; fuzzy_skin_scale = 1 ; fuzzy_skin_thickness = 0.2 ; gap_fill_flow_ratio = 1 ; gap_fill_target = nowhere ; gap_infill_speed = 120 ; gcode_add_line_number = 0 ; gcode_comments = 0 ; gcode_flavor = marlin2 ; gcode_label_objects = 1 ; grab_length = 0 ; gyroid_optimized = 0 ; has_scarf_joint_seam = 0 ; head_wrap_detect_zone = ; high_current_on_filament_swap = 0 ; hole_to_polyhole = 0 ; hole_to_polyhole_threshold = 0.01 ; hole_to_polyhole_twisted = 1 ; host_type = prusalink ; hot_plate_temp = 60 ; hot_plate_temp_initial_layer = 60 ; idle_temperature = 150 ; independent_support_layer_height = 1 ; infill_anchor = 2 ; infill_anchor_max = 12 ; infill_combination = 0 ; infill_combination_max_layer_height = 100% ; infill_direction = 45 ; infill_jerk = 9 ; infill_lock_depth = 1 ; infill_overhang_angle = 60 ; infill_shift_step = 0.4 ; infill_wall_overlap = 15% ; inherits_group = "0.20mm SPEED @CORE One 0.4";"Prusa Generic PLA @CORE One";"Prusa CORE One 0.4 nozzle" ; initial_layer_acceleration = 500 ; initial_layer_infill_speed = 100 ; initial_layer_jerk = 9 ; initial_layer_line_width = 0.5 ; initial_layer_min_bead_width = 85% ; initial_layer_print_height = 0.2 ; initial_layer_speed = 45 ; initial_layer_travel_acceleration = 100% ; initial_layer_travel_jerk = 100% ; initial_layer_travel_speed = 100% ; inner_wall_acceleration = 6000 ; inner_wall_filament_id = 0 ; inner_wall_flow_ratio = 1 ; inner_wall_jerk = 9 ; inner_wall_line_width = 0.45 ; inner_wall_speed = 170 ; input_shaping_damp_x = 0.1 ; input_shaping_damp_y = 0.1 ; input_shaping_emit = 0 ; input_shaping_freq_x = 0 ; input_shaping_freq_y = 0 ; input_shaping_type = Default ; interface_shells = 0 ; interlocking_beam = 0 ; interlocking_beam_layer_count = 2 ; interlocking_beam_width = 0.8 ; interlocking_boundary_avoidance = 2 ; interlocking_depth = 2 ; interlocking_orientation = 22.5 ; internal_bridge_angle = 0 ; internal_bridge_density = 100% ; internal_bridge_fan_speed = -1 ; internal_bridge_flow = 1 ; internal_bridge_speed = 150% ; internal_solid_filament_id = 0 ; internal_solid_infill_acceleration = 6000 ; internal_solid_infill_flow_ratio = 1 ; internal_solid_infill_line_width = 0.45 ; internal_solid_infill_pattern = monotonic ; internal_solid_infill_speed = 200 ; ironing_angle = 0 ; ironing_angle_fixed = 0 ; ironing_fan_speed = -1 ; ironing_flow = 10% ; ironing_inset = 0 ; ironing_pattern = rectilinear ; ironing_spacing = 0.15 ; ironing_speed = 30 ; ironing_type = no ironing ; is_infill_first = 0 ; lateral_lattice_angle_1 = -45 ; lateral_lattice_angle_2 = 45 ; layer_change_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] ; layer_height = 0.2 ; lightning_overhang_angle = 45 ; lightning_prune_angle = 45 ; lightning_straightening_angle = 45 ; line_width = 0.45 ; long_retractions_when_cut = 0 ; long_retractions_when_ec = 0 ; machine_end_gcode = {if layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; move print head up{endif}\nG1 E-1 F2400 ; additional retraction\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM141 S0 ; disable chamber control\nM107 ; turn off fan\nG1 X242 Y-9 F10200 ; park\nG4 ; wait\nM572 S0 ; reset PA\nM84 X Y E ; disable motors\n; max_layer_z = [max_layer_z] ; machine_load_filament_time = 0 ; machine_max_acceleration_e = 5000,2500 ; machine_max_acceleration_extruding = 7000,2500 ; machine_max_acceleration_retracting = 2500,1200 ; machine_max_acceleration_travel = 7000,2500 ; machine_max_acceleration_x = 10000,2500 ; machine_max_acceleration_y = 10000,2500 ; machine_max_acceleration_z = 400,200 ; machine_max_jerk_e = 10,10 ; machine_max_jerk_x = 10,8 ; machine_max_jerk_y = 10,8 ; machine_max_jerk_z = 2,2 ; machine_max_junction_deviation = 0.01 ; machine_max_speed_e = 100,100 ; machine_max_speed_x = 350,160 ; machine_max_speed_y = 350,160 ; machine_max_speed_z = 12,12 ; machine_min_extruding_rate = 0,0 ; machine_min_travel_rate = 0,0 ; machine_pause_gcode = M601 ; machine_start_gcode = ; --- Printer Initialization and Checks ---\n\nM17 ; enable steppers\nM862.1 P[nozzle_diameter] A{(printer_notes=~/.*ABRASIVE_NOZZLE.*/ ? 1 : 0)} F{(printer_notes=~/.*HF_NOZZLE.*/ ? 1 : 0)} ; nozzle check\nM862.3 P \"COREONE\" ; printer model check\nM862.5 P2 ; g-code level check\nM862.6 P\"Input shaper\" ; FW feature check\nM115 U6.3.0+10073\n\n; --- Print Area and Coordinate System ---\n\nM555 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} W{((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) - ((min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))} H{((first_layer_print_max[1])) - ((max(0, first_layer_print_min[1]) - 4))} ; define print area\n\nG90 ; use absolute coordinates\nM83 ; extruder in relative mode\n\n; --- Preparation ---\n\n{if chamber_temperature[initial_tool] > 35} \n; we need to preheat the chamber\nM140 S115 ; set bed temp for chamber heating\n{else} \n; just set the selected bed temp otherwise\nM140 S[first_layer_bed_temperature] ; set bed temp\n{endif}\n\nM109 R{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : 170)} ; wait for temp\n\nM84 E ; turn off E motor\n\nG28 ; home all axes without mesh bed leveling\n\n\n; -- Chamber Temperature Control --\n{if chamber_temperature[initial_tool] > 35} ; if we need to heat the chamber\n; min chamber temp section\nM104 T{initial_tool} S{if idle_temperature[initial_tool] == 0}100{else}{idle_temperature[initial_tool]}{endif} ; set idle temp\nG1 Z10 F720 ; set bed position\nG1 X242 Y-9 F4800 ; set print head position\nM191 S{chamber_temperature[initial_tool]} ; wait for minimal chamber temp\nM141 S0 ; set nominal chamber temp\nM107\nM140 S[first_layer_bed_temperature] ; set bed temp\n\n{else}\nM141 S{if chamber_temperature[initial_tool] == 0}20{else}{chamber_temperature[initial_tool]}{endif} ; set nominal chamber temp\n{endif}\n\n{if first_layer_bed_temperature[initial_tool]<=60}M106 S70{endif}\nG0 Z40 F10000\nM104 T{initial_tool} S{if idle_temperature[initial_tool] == 0}100{else}{idle_temperature[initial_tool]}{endif}\nM190 R[first_layer_bed_temperature] ; wait for bed temp\nM107\n\nG29 G ; absorb heat\n\nM109 R{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : 170)} ; wait for MBL temp\n\nM302 S160 ; lower cold extrusion limit to 160C\n\n{if filament_type[initial_tool]==\"FLEX\"}\nG1 E-4 F2400 ; retraction\n{else}\nG1 E-2 F2400 ; retraction\n{endif}\n\nM84 E ; turn off E motor\n\n; --- Mesh Bed Leveling (MBL) ---\n\nG29 P9 X208 Y-2.5 W32 H4 ; limited MBL\nM84 E ; turn off E motor\n\nG29 P1 ; invalidate MBL and probe print area\nG29 P1 X150 Y0 W100 H20 C ; probe near purge area\nG29 P3.2 ; MBL interpolation\nG29 P3.13 ; MBL extrapolation outside probe area\nG29 A ; activate MBL\n\n; --- Preparation for Purge Line ---\n\nM104 S{first_layer_temperature[initial_extruder]}\nG0 X249 Y-2.5 Z15 F4800 ; move away and ready for the purge\nM109 S{first_layer_temperature[initial_extruder]}\n\nG92 E0 ; reset extruder position\nM569 S0 E ; set spreadcycle mode for extruder\n\n; --- Extrude Purge Line ---\n\nG92 E0 ; reset extruder position\nG1 E{(filament_type[0] == \"FLEX\" ? 4 : 2)} F2400 ; deretraction after the initial one\nG0 E5 X235 Z0.2 F500 ; purge\nG0 X225 E4 F500 ; purge\nG0 X215 E4 F650 ; purge\nG0 X205 E4 F800 ; purge\nG0 X202 Z0.05 F8000 ; wipe, close to bed\nG0 X199 Z0.2 F8000 ; wipe, quickly away from bed\n\nG92 E0 ; reset extruder position\nM221 S100 ; set flow to 100% ; machine_tool_change_time = 0 ; machine_unload_filament_time = 0 ; make_overhang_printable = 0 ; make_overhang_printable_angle = 55 ; make_overhang_printable_hole_size = 0 ; manual_filament_change = 0 ; master_extruder_id = 1 ; max_bridge_length = 10 ; max_layer_height = 0.3 ; max_resonance_avoidance_speed = 120 ; max_travel_detour_distance = 0 ; max_volumetric_extrusion_rate_slope = 0 ; max_volumetric_extrusion_rate_slope_segment_length = 3 ; min_bead_width = 85% ; min_feature_size = 25% ; min_layer_height = 0.07 ; min_length_factor = 0.5 ; min_resonance_avoidance_speed = 70 ; min_skirt_length = 4 ; min_width_top_surface = 300% ; minimum_sparse_infill_area = 0 ; mmu_segmented_region_interlocking_depth = 0 ; mmu_segmented_region_max_width = 0 ; nonplanar_layers_angle = 12 ; nonplanar_layers_height = 5 ; nonplanar_top_surface_direction = 0 ; nonplanar_top_surface_flow_ratio = 1 ; notes = ; nozzle_diameter = 0.4 ; nozzle_flush_dataset = 0 ; nozzle_height = 2.5 ; nozzle_hrc = 0 ; nozzle_temperature = 220 ; nozzle_temperature_initial_layer = 230 ; nozzle_temperature_range_high = 230 ; nozzle_temperature_range_low = 190 ; nozzle_type = undefine ; nozzle_volume = 0 ; nozzle_volume_type = Standard ; only_one_wall_first_layer = 0 ; only_one_wall_top = 0 ; ooze_prevention = 0 ; other_layers_print_sequence = 0 ; other_layers_print_sequence_nums = 0 ; outer_wall_acceleration = 3000 ; outer_wall_filament_id = 0 ; outer_wall_flow_ratio = 1 ; outer_wall_jerk = 9 ; outer_wall_line_width = 0.45 ; outer_wall_speed = 170 ; overhang_1_4_speed = 80% ; overhang_2_4_speed = 30 ; overhang_3_4_speed = 50 ; overhang_4_4_speed = 15 ; overhang_fan_speed = 100 ; overhang_fan_threshold = 50% ; overhang_flow_ratio = 1 ; overhang_reverse = 0 ; overhang_reverse_internal_only = 0 ; overhang_reverse_threshold = 50% ; parallel_printheads_bed_exclude_areas = ; parallel_printheads_count = 1 ; parking_pos_retraction = 92 ; part_cooling_fan_min_pwm = 0 ; physical_extruder_map = 0 ; post_process = ; precise_outer_wall = 1 ; precise_z_height = 0 ; preferred_orientation = 0 ; preheat_steps = 1 ; preheat_time = 30 ; pressure_advance = 0.02 ; prime_tower_brim_width = 3 ; prime_tower_enable_framework = 0 ; prime_tower_flat_ironing = 0 ; prime_tower_infill_gap = 150% ; prime_tower_skip_points = 1 ; prime_tower_width = 60 ; prime_volume = 45 ; print_compatible_printers = "Prusa CORE One 0.4 nozzle" ; print_extruder_id = 1 ; print_extruder_variant = "Direct Drive Standard" ; print_flow_ratio = 1 ; print_order = default ; print_sequence = by layer ; print_settings_id = NP process CORE-One ; printable_area = 0x0,250x0,250x220,0x220 ; printable_height = 270 ; printer_extruder_id = 1 ; printer_extruder_variant = "Direct Drive Standard" ; printer_model = Prusa CORE One ; printer_notes = Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_COREONE\nPG\nNO_TEMPLATES ; printer_settings_id = NP machine CORE-One ; printer_structure = corexy ; printer_technology = FFF ; printer_variant = 0.4 ; printing_by_object_gcode = ; process_change_extrusion_role_gcode = ; purge_in_prime_tower = 1 ; raft_contact_distance = 0.15 ; raft_expansion = 1.5 ; raft_first_layer_density = 80% ; raft_first_layer_expansion = 3.5 ; raft_layers = 0 ; reduce_crossing_wall = 1 ; reduce_fan_stop_start_freq = 1 ; reduce_infill_retraction = 0 ; relative_bridge_angle = 0 ; required_nozzle_HRC = 0 ; resolution = 0.001 ; resonance_avoidance = 0 ; retract_before_wipe = 80% ; retract_length_toolchange = 0 ; retract_lift_above = 0 ; retract_lift_below = 269 ; retract_lift_enforce = All Surfaces ; retract_restart_extra = 0 ; retract_restart_extra_toolchange = 0 ; retract_when_changing_layer = 1 ; retraction_distances_when_cut = 18 ; retraction_distances_when_ec = 10 ; retraction_length = 0.7 ; retraction_minimum_travel = 1.5 ; retraction_speed = 45 ; role_based_wipe_speed = 1 ; scan_first_layer = 0 ; scarf_angle_threshold = 155 ; scarf_joint_flow_ratio = 1 ; scarf_joint_speed = 100% ; scarf_overhang_threshold = 40% ; seam_gap = 10% ; seam_position = aligned ; seam_slope_conditional = 0 ; seam_slope_entire_loop = 0 ; seam_slope_inner_walls = 0 ; seam_slope_min_length = 20 ; seam_slope_start_height = 0 ; seam_slope_steps = 10 ; seam_slope_type = none ; set_nonplanar_top_surface_direction = 1 ; set_nonplanar_top_surface_flow_ratio = 0 ; set_other_flow_ratios = 0 ; silent_mode = 0 ; single_extruder_multi_material = 0 ; single_extruder_multi_material_priming = 0 ; single_loop_draft_shield = 0 ; skeleton_infill_density = 25% ; skeleton_infill_line_width = 100% ; skin_infill_density = 25% ; skin_infill_depth = 2 ; skin_infill_line_width = 100% ; skirt_distance = 2 ; skirt_height = 3 ; skirt_loops = 0 ; skirt_speed = 50 ; skirt_start_angle = -135 ; skirt_type = combined ; slice_closing_radius = 0.049 ; slicing_mode = regular ; slow_down_for_layer_cooling = 1 ; slow_down_layer_time = 8 ; slow_down_layers = 0 ; slow_down_min_speed = 20 ; slowdown_for_curled_perimeters = 1 ; small_area_infill_flow_compensation = 0 ; small_area_infill_flow_compensation_model = 0,0;"\n0.2,0.4444";"\n0.4,0.6145";"\n0.6,0.7059";"\n0.8,0.7619";"\n1.5,0.8571";"\n2,0.8889";"\n3,0.9231";"\n5,0.9520";"\n10,1" ; small_perimeter_speed = 170 ; small_perimeter_threshold = 0 ; solid_infill_direction = 45 ; solid_infill_rotate_template = ; sparse_infill_acceleration = 7000 ; sparse_infill_density = 15% ; sparse_infill_filament_id = 0 ; sparse_infill_flow_ratio = 1 ; sparse_infill_line_width = 0.45 ; sparse_infill_pattern = crosshatch ; sparse_infill_rotate_template = ; sparse_infill_speed = 200 ; spiral_finishing_flow_ratio = 0 ; spiral_mode = 0 ; spiral_mode_max_xy_smoothing = 200% ; spiral_mode_smooth = 0 ; spiral_starting_flow_ratio = 0 ; staggered_inner_seams = 0 ; standby_temperature_delta = -5 ; start_end_points = 30x-3,54x245 ; supertack_plate_temp = 35 ; supertack_plate_temp_initial_layer = 35 ; support_air_filtration = 1 ; support_angle = 0 ; support_base_pattern = rectilinear ; support_base_pattern_spacing = 2 ; support_bottom_interface_spacing = 0.5 ; support_bottom_z_distance = 0.2 ; support_chamber_temp_control = 1 ; support_critical_regions_only = 0 ; support_expansion = 0 ; support_filament = 0 ; support_flow_ratio = 1 ; support_interface_bottom_layers = 0 ; support_interface_filament = 0 ; support_interface_flow_ratio = 1 ; support_interface_loop_pattern = 0 ; support_interface_not_for_body = 1 ; support_interface_pattern = auto ; support_interface_spacing = 0.2 ; support_interface_speed = 60 ; support_interface_top_layers = 3 ; support_ironing = 0 ; support_ironing_flow = 10% ; support_ironing_pattern = rectilinear ; support_ironing_spacing = 0.1 ; support_line_width = 0.36 ; support_material_interface_fan_speed = -1 ; support_multi_bed_types = 0 ; support_object_first_layer_gap = 0.2 ; support_object_skip_flush = 0 ; support_object_xy_distance = 0.36 ; support_on_build_plate_only = 0 ; support_parallel_printheads = 0 ; support_remove_small_overhang = 1 ; support_speed = 120 ; support_style = snug ; support_threshold_angle = 35 ; support_threshold_overlap = 50% ; support_top_z_distance = 0.2 ; support_type = normal(auto) ; symmetric_infill_y_axis = 0 ; temperature_vitrification = 60 ; template_custom_gcode = ; textured_cool_plate_temp = 40 ; textured_cool_plate_temp_initial_layer = 40 ; textured_plate_temp = 45 ; textured_plate_temp_initial_layer = 45 ; thick_bridges = 0 ; thick_internal_bridges = 1 ; thumbnails = 16x16/QOI, 313x173/QOI, 440x240/QOI, 480x240/QOI, 640x480/PNG ; time_cost = 0 ; time_lapse_gcode = ; timelapse_enabled = 0 ; timelapse_type = 0 ; tool_change_on_wipe_tower = 0 ; top_bottom_infill_wall_overlap = 25% ; top_shell_layers = 3 ; top_shell_thickness = 0.7 ; top_solid_infill_flow_ratio = 1 ; top_surface_acceleration = 2000 ; top_surface_density = 100% ; top_surface_filament_id = 0 ; top_surface_jerk = 9 ; top_surface_line_width = 0.42 ; top_surface_pattern = monotonicline ; top_surface_speed = 100 ; travel_acceleration = 7000 ; travel_jerk = 12 ; travel_slope = 1 ; travel_speed = 350 ; travel_speed_z = 12 ; tree_support_angle_slow = 25 ; tree_support_auto_brim = 1 ; tree_support_branch_angle = 40 ; tree_support_branch_angle_organic = 40 ; tree_support_branch_diameter = 2 ; tree_support_branch_diameter_angle = 5 ; tree_support_branch_diameter_organic = 2 ; tree_support_branch_distance = 5 ; tree_support_branch_distance_organic = 1 ; tree_support_brim_width = 3 ; tree_support_tip_diameter = 0.8 ; tree_support_top_rate = 30% ; tree_support_wall_count = 0 ; use_3mf = 0 ; use_firmware_retraction = 0 ; use_nonplanar_layers = 1 ; use_relative_e_distances = 1 ; volumetric_speed_coefficients = "" ; wall_direction = ccw ; wall_distribution_count = 1 ; wall_generator = arachne ; wall_loops = 2 ; wall_maximum_deviation = 0.025 ; wall_maximum_resolution = 0.5 ; wall_sequence = inner wall/outer wall ; wall_transition_angle = 10 ; wall_transition_filter_deviation = 25% ; wall_transition_length = 100% ; wipe = 0 ; wipe_before_external_loop = 0 ; wipe_distance = 1 ; wipe_on_loops = 0 ; wipe_speed = 80% ; wipe_tower_bridging = 10 ; wipe_tower_cone_angle = 30 ; wipe_tower_extra_flow = 100% ; wipe_tower_extra_rib_length = 0 ; wipe_tower_extra_spacing = 100% ; wipe_tower_filament = 0 ; wipe_tower_fillet_wall = 1 ; wipe_tower_max_purge_speed = 90 ; wipe_tower_no_sparse_layers = 0 ; wipe_tower_rib_width = 8 ; wipe_tower_rotation_angle = 0 ; wipe_tower_type = type2 ; wipe_tower_wall_type = rib ; wipe_tower_x = 15.000 ; wipe_tower_x = 15 ; wipe_tower_y = 220.000 ; wipe_tower_y = 220 ; wiping_volumes_extruders = 70,70,70,70,70,70,70,70,70,70 ; wrapping_detection_gcode = ; wrapping_detection_layers = 20 ; wrapping_exclude_area = ; xy_contour_compensation = 0 ; xy_hole_compensation = 0 ; z_hop = 0.2 ; z_hop_types = Slope Lift ; z_offset = 0 ; zaa_dont_alternate_fill_direction = 0 ; zaa_enabled = 0 ; zaa_min_z = 0.05 ; zaa_minimize_perimeter_height = 35 ; first_layer_bed_temperature = 35 ; bed_shape = 0x0,250x0,250x220,0x220 ; first_layer_temperature = 230 ; first_layer_height = 0.200 ; CONFIG_BLOCK_END