; generated by PrusaSlicer 2.4.0-beta1+win64 on 2021-12-06 at 15:10:25 UTC

; 

; external perimeters extrusion width = 0.45mm
; perimeters extrusion width = 0.45mm
; infill extrusion width = 0.45mm
; solid infill extrusion width = 0.45mm
; top infill extrusion width = 0.40mm
; first layer extrusion width = 0.42mm

M73 P0 R47
M73 Q0 S48
M201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2
M203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec
M204 P1250 R1250 T1250 ; sets acceleration (P, T) and retract acceleration (R), mm/sec^2
M205 X8.00 Y8.00 Z0.40 E4.50 ; sets the jerk limits, mm/sec
M205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec
M107
;TYPE:Custom
M862.3 P "MK3S" ; printer model check
M862.1 P0.4 ; nozzle diameter check
M115 U3.10.0 ; tell printer latest fw version
G90 ; use absolute coordinates
M83 ; extruder relative mode
M104 S215 ; set extruder temp
M140 S60 ; set bed temp
M190 S60 ; wait for bed temp
M109 S215 ; wait for extruder temp
G28 W ; home all without mesh bed level
G80 ; mesh bed leveling
G1 Z0.2 F720
G1 Y-3 F1000 ; go outside print area
G92 E0
G1 X60 E9 F1000 ; intro line
G1 X100 E12.5 F1000 ; intro line
G92 E0
M221 S95

; Don't change E values below. Excessive value can damage the printer.

M907 E538 ; set extruder motor current
G21 ; set units to millimeters
G90 ; use absolute coordinates
M83 ; use relative distances for extrusion
M900 K0.05 ; Filament gcode LA 1.5
M900 K30 ; Filament gcode LA 1.0
M107
;LAYER_CHANGE
;Z:0.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;0.2
 M104 S230 M109 S230 








G1 E-.8 F2100
G1 Z.4 F720
;AFTER_LAYER_CHANGE
;0.2
G1 X99.116 Y98.708 F10800
G1 Z.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Skirt/Brim
;WIDTH:0.42
G1 F1200
G1 X99.955 Y98.129 E.03195
G1 X101.092 Y97.719 E.03791
G1 X101.998 Y97.623 E.02856
G1 X148.103 Y97.625 E1.44561
G1 X148.906 Y97.719 E.02533
G1 X149.679 Y97.958 E.02537
G1 X150.395 Y98.336 E.02538
G1 X151.024 Y98.839 E.02527
G1 X151.648 Y99.583 E.03044
G1 X152.03 Y100.296 E.02535
G1 X152.278 Y101.09 E.02609
G1 X152.373 Y101.866 E.0245
G1 X152.374 Y108.129 E.19636
G1 X152.278 Y108.908 E.02461
G1 X152.122 Y109.464 E.01813
G1 X151.648 Y110.414 E.03328
G1 X150.851 Y111.317 E.03776
G1 X149.848 Y111.966 E.03746
G1 X148.906 Y112.279 E.03111
G1 X148 Y112.377 E.02858
G1 X101.685 Y112.364 E1.45219
G1 X100.912 Y112.237 E.02456
G1 X100.318 Y112.04 E.01961
G1 X99.792 Y111.779 E.0184
G1 X99.146 Y111.317 E.02489
G1 X98.584 Y110.736 E.02535
G1 X98.218 Y110.204 E.02025
G1 X97.959 Y109.68 E.01833
G1 X97.719 Y108.908 E.02536
G1 X97.623 Y107.998 E.02868
G1 X97.623 Y101.998 E.18813
G1 X97.818 Y100.71 E.04086
G1 X98.338 Y99.601 E.03841
G1 X99.076 Y98.753 E.03525
M204 S1000
; printing object Fast Temp Tower PLA v4 id:0 copy 0
;WIPE_START
G1 F8640
G1 X99.955 Y98.129 E-.24871
G1 X101.092 Y97.719 E-.27917
G1 X101.998 Y97.623 E-.21031
G1 X102.092 Y97.623 E-.02182
;WIPE_END
G1 E-.04 F2100
G1 Z.6 F720
G1 X101.64 Y100.849 F10800
G1 Z.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F1200
G1 X101.776 Y100.81 E.00445
G1 X102.029 Y100.787 E.00796
G1 X148.098 Y100.792 E1.44446
G1 X148.331 Y100.836 E.00743
G1 X148.539 Y100.916 E.007
G1 X148.726 Y101.031 E.0069
G1 X148.893 Y101.184 E.00707
G1 X149.029 Y101.363 E.00704
G1 X149.127 Y101.56 E.00692
G1 X149.188 Y101.778 E.00709
G1 X149.213 Y102.032 E.00802
G1 X149.213 Y107.964 E.18597
G1 X149.188 Y108.22 E.00808
G1 X149.127 Y108.438 E.00708
G1 X149.029 Y108.635 E.00692
G1 X148.823 Y108.887 E.0102
G1 X148.625 Y109.037 E.00778
G1 X148.451 Y109.123 E.00608
G1 X148.22 Y109.188 E.00753
G1 X147.966 Y109.213 E.008
G1 X102.032 Y109.213 E1.44023
G1 X101.778 Y109.188 E.00801
G1 X101.559 Y109.127 E.0071
G1 X101.362 Y109.029 E.00692
G1 X101.184 Y108.894 E.00699
G1 X101.022 Y108.717 E.00752
G1 X100.871 Y108.439 E.00993
G1 X100.81 Y108.222 E.00705
G1 X100.787 Y107.967 E.00803
G1 X100.787 Y102.029 E.18618
G1 X100.81 Y101.776 E.00797
G1 X100.908 Y101.471 E.01005
G1 X101.094 Y101.194 E.01045
G1 X101.349 Y100.976 E.01052
G1 X101.582 Y100.865 E.00809
M204 S1000
G1 X101.046 Y100.726 F10800
M204 S800
;TYPE:External perimeter
G1 F1200
G1 X101.157 Y100.65 E.00423
G1 X101.423 Y100.518 E.00931
G1 X101.707 Y100.438 E.00924
G1 X102.012 Y100.41 E.00959
G1 X148.141 Y100.417 E1.44636
G1 X148.434 Y100.472 E.00934
G1 X148.707 Y100.576 E.00917
G1 X148.955 Y100.729 E.00914
G1 X149.172 Y100.929 E.00925
G1 X149.35 Y101.163 E.00921
G1 X149.48 Y101.424 E.00916
G1 X149.56 Y101.708 E.00924
G1 X149.59 Y102.014 E.00964
G1 X149.59 Y107.982 E.18713
G1 X149.56 Y108.29 E.0097
G1 X149.48 Y108.574 E.00923
G1 X149.35 Y108.835 E.00916
G1 X149.072 Y109.172 E.01369
G1 X148.831 Y109.354 E.00947
G1 X148.579 Y109.479 E.00883
G1 X148.29 Y109.56 E.00941
G1 X147.984 Y109.59 E.00963
G1 X102.013 Y109.59 E1.44139
G1 X101.708 Y109.56 E.00963
G1 X101.423 Y109.48 E.00926
G1 X101.163 Y109.351 E.00913
G1 X100.929 Y109.174 E.00918
G1 X100.726 Y108.952 E.00943
G1 X100.649 Y108.84 E.00425
G1 X100.518 Y108.575 E.00929
G1 X100.438 Y108.291 E.00924
G1 X100.41 Y107.984 E.00965
G1 X100.41 Y102.012 E.18726
G1 X100.438 Y101.707 E.00959
G1 X100.519 Y101.419 E.0094
G1 X100.574 Y101.295 E.00424
G1 X100.732 Y101.039 E.00944
G1 X101.002 Y100.767 E.01203
M204 S1000
G1 X101.173 Y100.773 F10800
;WIPE_START
G1 F8640
G1 X101.157 Y100.65 E-.04489
G1 X101.423 Y100.518 E-.06859
G1 X101.707 Y100.438 E-.06804
G1 X102.012 Y100.41 E-.0706
G1 X104.211 Y100.41 E-.50787
;WIPE_END
G1 E-.04 F2100
G1 Z.6 F720
G1 X148.245 Y100.938 F10800
G1 Z.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Solid infill
;WIDTH:0.421537
G1 F1200
G1 X148.684 Y101.377 E.01956
G1 X148.787 Y101.512 E.00536
G1 X148.862 Y101.662 E.00526
G1 X148.909 Y101.83 E.0055
G1 X148.93 Y102.159 E.01035
G1 X147.842 Y101.07 E.04845
G1 X147.307 Y101.07 E.01686
G1 X148.93 Y102.694 E.07229
G1 X148.93 Y103.229 E.01686
G1 X146.771 Y101.07 E.09613
G1 X146.236 Y101.07 E.01686
G1 X148.93 Y103.765 E.11997
G1 X148.93 Y104.3 E.01686
G1 X145.7 Y101.07 E.14381
G1 X145.165 Y101.07 E.01686
G1 X148.93 Y104.836 E.16765
G1 X148.93 Y105.371 E.01686
G1 X144.629 Y101.07 E.19149
G1 X144.094 Y101.07 E.01686
G1 X148.93 Y105.907 E.21533
G1 X148.93 Y106.442 E.01686
G1 X143.558 Y101.07 E.23916
G1 X143.023 Y101.07 E.01686
G1 X148.93 Y106.978 E.263
G1 X148.93 Y107.513 E.01686
M73 P1 R47
M73 Q1 S48
G1 X142.487 Y101.07 E.28684
G1 X141.952 Y101.07 E.01686
G1 X148.921 Y108.04 E.31029
G1 X148.909 Y108.168 E.00405
G1 X148.862 Y108.336 E.00549
G1 X148.802 Y108.456 E.00422
G1 X141.417 Y101.07 E.32882
G1 X140.881 Y101.07 E.01686
G1 X148.546 Y108.735 E.34126
G1 X148.412 Y108.828 E.00512
G1 X148.179 Y108.904 E.00772
G1 X140.346 Y101.07 E.34877
G1 X139.81 Y101.07 E.01686
G1 X147.67 Y108.93 E.34994
G1 X147.135 Y108.93 E.01686
G1 X139.275 Y101.07 E.34994
G1 X138.739 Y101.07 E.01686
G1 X146.599 Y108.93 E.34994
G1 X146.064 Y108.93 E.01686
G1 X138.204 Y101.07 E.34994
G1 X137.668 Y101.07 E.01686
G1 X145.528 Y108.93 E.34994
G1 X144.993 Y108.93 E.01686
G1 X137.133 Y101.07 E.34994
G1 X136.597 Y101.07 E.01686
G1 X144.457 Y108.93 E.34994
G1 X143.922 Y108.93 E.01686
G1 X136.062 Y101.07 E.34994
G1 X135.527 Y101.07 E.01686
G1 X143.387 Y108.93 E.34994
G1 X142.851 Y108.93 E.01686
G1 X134.991 Y101.07 E.34994
G1 X134.456 Y101.07 E.01686
G1 X142.316 Y108.93 E.34994
G1 X141.78 Y108.93 E.01686
G1 X133.92 Y101.07 E.34994
G1 X133.385 Y101.07 E.01686
G1 X141.245 Y108.93 E.34994
G1 X140.709 Y108.93 E.01686
G1 X132.849 Y101.07 E.34994
G1 X132.314 Y101.07 E.01686
G1 X140.174 Y108.93 E.34994
G1 X139.638 Y108.93 E.01686
G1 X131.778 Y101.07 E.34994
G1 X131.243 Y101.07 E.01686
G1 X139.103 Y108.93 E.34994
G1 X138.567 Y108.93 E.01686
M73 Q1 S47
G1 X130.708 Y101.07 E.34994
G1 X130.172 Y101.07 E.01686
G1 X138.032 Y108.93 E.34994
G1 X137.497 Y108.93 E.01686
G1 X129.637 Y101.07 E.34995
G1 X129.101 Y101.07 E.01686
G1 X136.961 Y108.93 E.34995
G1 X136.426 Y108.93 E.01686
G1 X128.566 Y101.07 E.34995
G1 X128.03 Y101.07 E.01686
G1 X135.89 Y108.93 E.34995
G1 X135.355 Y108.93 E.01686
G1 X127.495 Y101.07 E.34995
G1 X126.959 Y101.07 E.01686
G1 X134.819 Y108.93 E.34995
G1 X134.284 Y108.93 E.01686
G1 X126.424 Y101.07 E.34995
G1 X125.888 Y101.07 E.01686
G1 X133.748 Y108.93 E.34995
G1 X133.213 Y108.93 E.01686
G1 X125.353 Y101.07 E.34995
G1 X124.818 Y101.07 E.01686
G1 X132.678 Y108.93 E.34995
G1 X132.142 Y108.93 E.01686
G1 X124.282 Y101.07 E.34995
G1 X123.747 Y101.07 E.01686
G1 X131.607 Y108.93 E.34995
G1 X131.071 Y108.93 E.01686
G1 X123.211 Y101.07 E.34995
G1 X122.676 Y101.07 E.01686
G1 X130.536 Y108.93 E.34995
G1 X130 Y108.93 E.01686
G1 X122.14 Y101.07 E.34995
G1 X121.605 Y101.07 E.01686
G1 X129.465 Y108.93 E.34995
G1 X128.929 Y108.93 E.01686
G1 X121.069 Y101.07 E.34995
G1 X120.534 Y101.07 E.01686
G1 X128.394 Y108.93 E.34995
G1 X127.859 Y108.93 E.01686
G1 X119.999 Y101.07 E.34995
G1 X119.463 Y101.07 E.01686
G1 X127.323 Y108.93 E.34995
G1 X126.788 Y108.93 E.01686
M73 P1 R46
G1 X118.928 Y101.07 E.34995
G1 X118.392 Y101.07 E.01686
G1 X126.252 Y108.93 E.34995
G1 X125.717 Y108.93 E.01686
G1 X117.857 Y101.07 E.34995
G1 X117.321 Y101.07 E.01686
G1 X125.181 Y108.93 E.34995
G1 X124.646 Y108.93 E.01686
M73 P2 R46
G1 X116.786 Y101.07 E.34995
G1 X116.25 Y101.07 E.01686
M73 Q2 S47
G1 X124.11 Y108.93 E.34995
G1 X123.575 Y108.93 E.01686
G1 X115.715 Y101.07 E.34995
G1 X115.179 Y101.07 E.01686
G1 X123.04 Y108.93 E.34995
G1 X122.504 Y108.93 E.01686
G1 X114.644 Y101.07 E.34995
G1 X114.109 Y101.07 E.01686
G1 X121.969 Y108.93 E.34995
G1 X121.433 Y108.93 E.01686
G1 X113.573 Y101.07 E.34995
G1 X113.038 Y101.07 E.01686
G1 X120.898 Y108.93 E.34995
G1 X120.362 Y108.93 E.01686
G1 X112.502 Y101.07 E.34995
G1 X111.967 Y101.07 E.01686
G1 X119.827 Y108.93 E.34995
G1 X119.291 Y108.93 E.01686
G1 X111.431 Y101.07 E.34995
G1 X110.896 Y101.07 E.01686
G1 X118.756 Y108.93 E.34995
G1 X118.221 Y108.93 E.01686
G1 X110.36 Y101.07 E.34995
G1 X109.825 Y101.07 E.01686
G1 X117.685 Y108.93 E.34995
G1 X117.15 Y108.93 E.01686
G1 X109.29 Y101.07 E.34995
G1 X108.754 Y101.07 E.01686
G1 X116.614 Y108.93 E.34995
G1 X116.079 Y108.93 E.01686
G1 X108.219 Y101.07 E.34995
G1 X107.683 Y101.07 E.01686
G1 X115.543 Y108.93 E.34996
G1 X115.008 Y108.93 E.01686
G1 X107.148 Y101.07 E.34996
G1 X106.612 Y101.07 E.01686
G1 X114.472 Y108.93 E.34996
G1 X113.937 Y108.93 E.01686
G1 X106.077 Y101.07 E.34996
G1 X105.541 Y101.07 E.01686
G1 X113.402 Y108.93 E.34996
G1 X112.866 Y108.93 E.01686
G1 X105.006 Y101.07 E.34996
G1 X104.47 Y101.07 E.01686
G1 X112.331 Y108.93 E.34996
G1 X111.795 Y108.93 E.01686
G1 X103.935 Y101.07 E.34996
G1 X103.4 Y101.07 E.01686
G1 X111.26 Y108.93 E.34996
G1 X110.724 Y108.93 E.01686
G1 X102.864 Y101.07 E.34996
G1 X102.329 Y101.07 E.01686
G1 X110.189 Y108.93 E.34996
G1 X109.653 Y108.93 E.01686
G1 X101.816 Y101.093 E.34893
G1 X101.661 Y101.136 E.00506
G1 X101.506 Y101.214 E.00547
G1 X101.45 Y101.262 E.00233
G1 X109.118 Y108.93 E.34141
G1 X108.583 Y108.93 E.01686
G1 X101.198 Y101.546 E.32876
G1 X101.165 Y101.595 E.00188
G1 X101.089 Y101.833 E.00785
G1 X101.077 Y101.96 E.00403
G1 X108.047 Y108.93 E.31031
G1 X107.512 Y108.93 E.01686
G1 X101.07 Y102.488 E.28681
G1 X101.07 Y103.024 E.01686
G1 X106.976 Y108.93 E.26297
G1 X106.441 Y108.93 E.01686
G1 X101.07 Y103.559 E.23913
G1 X101.07 Y104.095 E.01686
G1 X105.905 Y108.93 E.21529
G1 X105.37 Y108.93 E.01686
G1 X101.07 Y104.63 E.19145
G1 X101.07 Y105.166 E.01686
G1 X104.834 Y108.93 E.16761
G1 X104.299 Y108.93 E.01686
G1 X101.07 Y105.701 E.14377
G1 X101.07 Y106.236 E.01686
G1 X103.764 Y108.93 E.11993
G1 X103.228 Y108.93 E.01686
G1 X101.07 Y106.772 E.09609
G1 X101.07 Y107.307 E.01686
G1 X102.693 Y108.93 E.07225
G1 X102.157 Y108.93 E.01686
G1 X100.9 Y107.673 E.05597
M204 S1000
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
M106 S84.15
;LAYER_CHANGE
;Z:0.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;0.4
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X102.157 Y108.93 E-.41048
G1 X102.693 Y108.93 E-.12364
G1 X102.001 Y108.238 E-.22588
;WIPE_END
G1 E-.04 F2100
G1 Z.6 F720
;AFTER_LAYER_CHANGE
;0.4
G1 X101.334 Y112.306 F10800
G1 Z.4 F720
G1 E.8 F2100
;TYPE:Skirt/Brim
;WIDTH:0.42
G1 F3000
G1 X100.912 Y112.237 E.01343
G1 X100.318 Y112.04 E.01961
G1 X99.792 Y111.779 E.0184
G1 X99.146 Y111.317 E.02489
G1 X98.584 Y110.736 E.02535
G1 X98.218 Y110.204 E.02025
G1 X97.959 Y109.68 E.01833
G1 X97.719 Y108.908 E.02536
G1 X97.623 Y107.998 E.02868
G1 X97.623 Y101.998 E.18813
G1 X97.818 Y100.71 E.04086
G1 X98.338 Y99.601 E.03841
G1 X99.116 Y98.708 E.03713
G1 X99.955 Y98.129 E.03195
G1 X101.092 Y97.719 E.03791
G1 X101.998 Y97.623 E.02856
G1 X148.103 Y97.625 E1.44561
G1 X148.906 Y97.719 E.02533
G1 X149.679 Y97.958 E.02537
G1 X150.395 Y98.336 E.02538
G1 X151.024 Y98.839 E.02527
G1 X151.648 Y99.583 E.03044
G1 X152.03 Y100.296 E.02535
G1 X152.278 Y101.09 E.02609
G1 X152.373 Y101.866 E.0245
G1 X152.374 Y108.129 E.19636
G1 X152.278 Y108.908 E.02461
G1 X152.122 Y109.464 E.01813
G1 X151.648 Y110.414 E.03328
G1 X150.851 Y111.317 E.03776
G1 X149.848 Y111.966 E.03746
G1 X148.906 Y112.279 E.03111
G1 X148 Y112.377 E.02858
G1 X101.685 Y112.364 E1.45219
G1 X101.393 Y112.316 E.00926
; printing object Fast Temp Tower PLA v4 id:0 copy 0
;WIPE_START
G1 F8640
G1 X100.912 Y112.237 E-.11274
G1 X100.318 Y112.04 E-.14439
G1 X99.792 Y111.779 E-.13553
G1 X99.146 Y111.317 E-.18329
G1 X98.592 Y110.744 E-.18404
;WIPE_END
G1 E-.04 F2100
G1 Z.8 F720
G1 X100.69 Y108.364 F10800
G1 Z.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F3600
G1 X100.658 Y108.251 E.00398
G1 X100.632 Y107.969 E.00957
G1 X100.632 Y102.027 E.20112
G1 X100.658 Y101.748 E.00951
G1 X100.769 Y101.403 E.01225
G1 X100.979 Y101.09 E.01276
G1 X101.266 Y100.845 E.01279
G1 X101.504 Y100.727 E.00898
G1 X101.748 Y100.658 E.00857
G1 X102.027 Y100.632 E.0095
G1 X148.014 Y100.634 E1.55662
G1 X148.36 Y100.682 E.0118
G1 X148.608 Y100.777 E.009
G1 X148.821 Y100.908 E.00846
G1 X149.007 Y101.08 E.00858
G1 X149.161 Y101.281 E.00857
G1 X149.271 Y101.504 E.00842
G1 X149.34 Y101.749 E.00863
G1 X149.368 Y102.029 E.00951
G1 X149.368 Y107.967 E.20099
G1 X149.34 Y108.249 E.00958
G1 X149.271 Y108.494 E.00863
G1 X149.161 Y108.717 E.00842
G1 X148.928 Y109.001 E.01244
G1 X148.608 Y109.223 E.01317
G1 X148.248 Y109.34 E.01282
G1 X147.969 Y109.368 E.0095
G1 X102.029 Y109.368 E1.55503
G1 X101.749 Y109.34 E.0095
G1 X101.504 Y109.272 E.00862
G1 X101.28 Y109.16 E.00848
G1 X101.08 Y109.009 E.00849
G1 X100.898 Y108.81 E.0091
G1 X100.726 Y108.494 E.01218
G1 X100.706 Y108.421 E.00255
M204 S1000
G1 X100.492 Y108.938 F10800
M204 S800
;TYPE:External perimeter
G1 F2100
G1 X100.345 Y108.641 E.01122
G1 X100.256 Y108.325 E.01111
G1 X100.225 Y107.988 E.01146
G1 X100.225 Y102.008 E.20239
G1 X100.256 Y101.673 E.0114
G1 X100.346 Y101.352 E.01129
G1 X100.407 Y101.213 E.00515
G1 X100.585 Y100.926 E.01141
G1 X100.684 Y100.808 E.00524
G1 X100.934 Y100.579 E.01148
G1 X101.06 Y100.493 E.00516
G1 X101.357 Y100.345 E.01124
G1 X101.673 Y100.256 E.01111
G1 X102.008 Y100.225 E.01139
G1 X148.035 Y100.227 E1.55795
G1 X148.329 Y100.256 E.01
M73 P3 R46
G1 X148.48 Y100.292 E.00524
G1 X148.789 Y100.411 E.01124
G1 X149.067 Y100.582 E.01106
G1 X149.309 Y100.804 E.01111
G1 X149.508 Y101.065 E.01111
G1 X149.653 Y101.357 E.01103
G1 X149.742 Y101.674 E.01113
G1 X149.775 Y102.009 E.0114
G1 X149.775 Y107.987 E.20234
G1 X149.742 Y108.324 E.01147
M73 Q3 S47
G1 X149.653 Y108.641 E.01113
G1 X149.508 Y108.933 E.01103
G1 X149.306 Y109.198 E.0113
G1 X149.197 Y109.308 E.00524
G1 X148.929 Y109.511 E.01137
G1 X148.79 Y109.588 E.00539
G1 X148.646 Y109.652 E.00533
G1 X148.324 Y109.742 E.01131
G1 X147.989 Y109.775 E.01139
G1 X102.009 Y109.775 E1.55638
G1 X101.674 Y109.742 E.01139
G1 X101.357 Y109.653 E.01113
G1 X101.065 Y109.508 E.01106
G1 X100.804 Y109.311 E.01105
G1 X100.526 Y108.987 E.01445
M204 S1000
G1 X100.644 Y108.643 F10800
;WIPE_START
G1 F8640
G1 X100.345 Y108.641 E-.09027
G1 X100.256 Y108.325 E-.07578
G1 X100.225 Y107.988 E-.0782
G1 X100.225 Y105.754 E-.51575
;WIPE_END
G1 E-.04 F2100
G1 Z.8 F720
G1 X147.67 Y109.246 F10800
G1 Z.4 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.452231
G1 F9218
G1 X149.063 Y107.853 E.06703
G1 X149.063 Y107.274 E.0197
G1 X147.274 Y109.063 E.08607
G1 X146.695 Y109.063 E.0197
G1 X149.063 Y106.695 E.11393
G1 X149.063 Y106.117 E.0197
G1 X146.117 Y109.063 E.1418
G1 X145.538 Y109.063 E.0197
G1 X149.063 Y105.538 E.16966
G1 X149.063 Y104.959 E.0197
G1 X144.959 Y109.063 E.19752
G1 X144.38 Y109.063 E.0197
G1 X149.063 Y104.38 E.22538
G1 X149.063 Y103.801 E.0197
G1 X143.801 Y109.063 E.25324
G1 X143.222 Y109.063 E.0197
G1 X149.063 Y103.222 E.2811
G1 X149.063 Y102.644 E.0197
G1 X142.644 Y109.063 E.30896
G1 X142.065 Y109.063 E.0197
G1 X149.063 Y102.065 E.33682
G1 X149.039 Y101.806 E.00883
G1 X148.968 Y101.58 E.00806
G1 X141.486 Y109.063 E.36014
G1 X140.907 Y109.063 E.0197
G1 X148.73 Y101.24 E.37654
G1 X148.635 Y101.153 E.00437
G1 X148.472 Y101.052 E.00654
G1 X148.376 Y101.015 E.0035
G1 X140.328 Y109.063 E.38735
G1 X139.749 Y109.063 E.0197
G1 X147.873 Y100.939 E.39099
G1 X147.294 Y100.939 E.0197
G1 X139.17 Y109.063 E.39099
G1 X138.592 Y109.063 E.0197
G1 X146.715 Y100.939 E.39099
G1 X146.136 Y100.939 E.0197
G1 X138.013 Y109.063 E.39099
G1 X137.434 Y109.063 E.0197
G1 X145.557 Y100.939 E.39099
G1 X144.978 Y100.939 E.0197
G1 X136.855 Y109.063 E.39099
G1 X136.276 Y109.063 E.0197
G1 X144.4 Y100.939 E.39099
G1 X143.821 Y100.939 E.0197
G1 X135.697 Y109.063 E.39099
G1 X135.118 Y109.063 E.0197
G1 X143.242 Y100.939 E.391
G1 X142.663 Y100.939 E.0197
G1 X134.54 Y109.063 E.391
G1 X133.961 Y109.063 E.0197
G1 X142.084 Y100.939 E.391
G1 X141.505 Y100.939 E.0197
G1 X133.382 Y109.063 E.391
G1 X132.803 Y109.063 E.0197
G1 X140.927 Y100.939 E.391
G1 X140.348 Y100.939 E.0197
G1 X132.224 Y109.063 E.391
G1 X131.645 Y109.063 E.0197
G1 X139.769 Y100.939 E.391
G1 X139.19 Y100.939 E.0197
G1 X131.066 Y109.063 E.391
G1 X130.488 Y109.063 E.0197
G1 X138.611 Y100.939 E.39101
G1 X138.032 Y100.939 E.0197
G1 X129.909 Y109.063 E.39101
G1 X129.33 Y109.063 E.0197
G1 X137.454 Y100.939 E.39101
G1 X136.875 Y100.939 E.0197
G1 X128.751 Y109.063 E.39101
G1 X128.172 Y109.063 E.0197
G1 X136.296 Y100.939 E.39101
G1 X135.717 Y100.939 E.0197
G1 X127.593 Y109.063 E.39101
G1 X127.014 Y109.063 E.0197
G1 X135.138 Y100.939 E.39101
G1 X134.559 Y100.939 E.0197
G1 X126.436 Y109.063 E.39101
G1 X125.857 Y109.063 E.0197
G1 X133.981 Y100.939 E.39102
G1 X133.402 Y100.939 E.0197
G1 X125.278 Y109.063 E.39102
G1 X124.699 Y109.063 E.0197
G1 X132.823 Y100.939 E.39102
G1 X132.244 Y100.939 E.0197
G1 X124.12 Y109.063 E.39102
G1 X123.541 Y109.063 E.0197
G1 X131.665 Y100.939 E.39102
G1 X131.086 Y100.939 E.0197
G1 X122.963 Y109.063 E.39102
G1 X122.384 Y109.063 E.0197
G1 X130.508 Y100.939 E.39102
G1 X129.929 Y100.939 E.0197
G1 X121.805 Y109.063 E.39102
G1 X121.226 Y109.063 E.0197
G1 X129.35 Y100.939 E.39103
G1 X128.771 Y100.939 E.0197
G1 X120.647 Y109.063 E.39103
G1 X120.068 Y109.063 E.0197
G1 X128.192 Y100.939 E.39103
G1 X127.614 Y100.938 E.0197
G1 X119.489 Y109.063 E.39103
G1 X118.911 Y109.063 E.0197
G1 X127.035 Y100.938 E.39103
G1 X126.456 Y100.938 E.0197
G1 X118.332 Y109.063 E.39103
G1 X117.753 Y109.063 E.0197
G1 X125.877 Y100.938 E.39103
G1 X125.298 Y100.938 E.0197
G1 X117.174 Y109.063 E.39103
G1 X116.595 Y109.063 E.0197
G1 X124.719 Y100.938 E.39103
G1 X124.141 Y100.938 E.0197
G1 X116.016 Y109.063 E.39104
G1 X115.437 Y109.063 E.0197
G1 X123.562 Y100.938 E.39104
G1 X122.983 Y100.938 E.0197
G1 X114.859 Y109.063 E.39104
G1 X114.28 Y109.063 E.0197
M73 Q3 S46
G1 X122.404 Y100.938 E.39104
G1 X121.825 Y100.938 E.0197
G1 X113.701 Y109.063 E.39104
G1 X113.122 Y109.063 E.0197
G1 X121.246 Y100.938 E.39104
G1 X120.668 Y100.938 E.0197
G1 X112.543 Y109.063 E.39104
G1 X111.964 Y109.063 E.0197
G1 X120.089 Y100.938 E.39104
G1 X119.51 Y100.938 E.0197
G1 X111.385 Y109.063 E.39105
G1 X110.807 Y109.063 E.0197
G1 X118.931 Y100.938 E.39105
G1 X118.352 Y100.938 E.0197
G1 X110.228 Y109.063 E.39105
G1 X109.649 Y109.063 E.0197
G1 X117.773 Y100.938 E.39105
G1 X117.195 Y100.938 E.0197
G1 X109.07 Y109.063 E.39105
G1 X108.491 Y109.063 E.0197
G1 X116.616 Y100.938 E.39105
G1 X116.037 Y100.938 E.0197
G1 X107.912 Y109.063 E.39105
G1 X107.333 Y109.063 E.0197
G1 X115.458 Y100.938 E.39105
G1 X114.879 Y100.938 E.0197
G1 X106.755 Y109.063 E.39106
G1 X106.176 Y109.063 E.0197
G1 X114.3 Y100.938 E.39106
G1 X113.722 Y100.938 E.0197
G1 X105.597 Y109.063 E.39106
G1 X105.018 Y109.063 E.0197
G1 X113.143 Y100.938 E.39106
G1 X112.564 Y100.938 E.0197
G1 X104.439 Y109.063 E.39106
G1 X103.86 Y109.063 E.0197
G1 X111.985 Y100.938 E.39106
G1 X111.406 Y100.938 E.0197
G1 X103.282 Y109.063 E.39106
G1 X102.703 Y109.063 E.0197
G1 X110.828 Y100.938 E.39106
G1 X110.249 Y100.938 E.0197
G1 X102.124 Y109.063 E.39107
G1 X101.806 Y109.039 E.01085
G1 X101.62 Y108.987 E.00656
G1 X109.67 Y100.938 E.38743
G1 X109.091 Y100.938 E.0197
G1 X101.269 Y108.76 E.3765
G1 X101.101 Y108.562 E.00883
G1 X101.03 Y108.42 E.00541
G1 X108.512 Y100.938 E.36012
G1 X107.933 Y100.938 E.0197
G1 X100.937 Y107.934 E.33673
G1 X100.937 Y107.355 E.0197
G1 X107.355 Y100.938 E.30887
G1 X106.776 Y100.938 E.0197
G1 X100.937 Y106.776 E.28101
G1 X100.937 Y106.197 E.0197
G1 X106.197 Y100.938 E.25315
G1 X105.618 Y100.938 E.0197
G1 X100.937 Y105.618 E.22529
G1 X100.937 Y105.039 E.0197
G1 X105.039 Y100.938 E.19743
G1 X104.46 Y100.937 E.0197
G1 X100.937 Y104.461 E.16957
G1 X100.937 Y103.882 E.0197
G1 X103.882 Y100.937 E.14171
G1 X103.303 Y100.937 E.0197
G1 X100.937 Y103.303 E.11385
G1 X100.937 Y102.724 E.0197
G1 X102.724 Y100.937 E.08599
G1 X102.145 Y100.937 E.0197
G1 X100.754 Y102.328 E.06695
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
M106 S170.85
;LAYER_CHANGE
;Z:0.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;0.6
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X102.145 Y100.937 E-.45419
G1 X102.724 Y100.937 E-.13365
G1 X102.197 Y101.465 E-.17216
;WIPE_END
G1 E-.04 F2100
G1 Z.8 F720
;AFTER_LAYER_CHANGE
;0.6
G1 X101.791 Y97.645 F10800
G1 Z.6 F720
G1 E.8 F2100
;TYPE:Skirt/Brim
;WIDTH:0.42
G1 F3000
G1 X101.998 Y97.623 E.00651
G1 X148.103 Y97.625 E1.44561
G1 X148.906 Y97.719 E.02533
G1 X149.679 Y97.958 E.02537
G1 X150.395 Y98.336 E.02538
G1 X151.024 Y98.839 E.02527
G1 X151.648 Y99.583 E.03044
G1 X152.03 Y100.296 E.02535
G1 X152.278 Y101.09 E.02609
G1 X152.373 Y101.866 E.0245
G1 X152.374 Y108.129 E.19636
G1 X152.278 Y108.908 E.02461
G1 X152.122 Y109.464 E.01813
G1 X151.648 Y110.414 E.03328
G1 X150.851 Y111.317 E.03776
G1 X149.848 Y111.966 E.03746
G1 X148.906 Y112.279 E.03111
G1 X148 Y112.377 E.02858
G1 X101.685 Y112.364 E1.45219
G1 X100.912 Y112.237 E.02456
G1 X100.318 Y112.04 E.01961
G1 X99.792 Y111.779 E.0184
G1 X99.146 Y111.317 E.02489
G1 X98.584 Y110.736 E.02535
G1 X98.218 Y110.204 E.02025
G1 X97.959 Y109.68 E.01833
G1 X97.719 Y108.908 E.02536
G1 X97.623 Y107.998 E.02868
G1 X97.623 Y101.998 E.18813
G1 X97.818 Y100.71 E.04086
G1 X98.338 Y99.601 E.03841
G1 X99.116 Y98.708 E.03713
G1 X99.955 Y98.129 E.03195
G1 X101.092 Y97.719 E.03791
G1 X101.732 Y97.651 E.02017
; printing object Fast Temp Tower PLA v4 id:0 copy 0
;WIPE_START
G1 F8640
G1 X101.998 Y97.623 E-.06179
G1 X105.021 Y97.623 E-.69821
;WIPE_END
G1 E-.04 F2100
G1 Z1 F720
G1 X101.542 Y100.716 F10800
G1 Z.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F3600
G1 X101.748 Y100.658 E.00722
G1 X102.027 Y100.632 E.0095
G1 X148.043 Y100.635 E1.5576
G1 X148.26 Y100.658 E.00738
G1 X148.608 Y100.777 E.01244
G1 X148.821 Y100.908 E.00846
G1 X149.007 Y101.08 E.00858
G1 X149.161 Y101.281 E.00857
G1 X149.271 Y101.504 E.00842
G1 X149.34 Y101.749 E.00863
G1 X149.368 Y102.029 E.00951
G1 X149.368 Y107.967 E.20099
G1 X149.34 Y108.249 E.00958
G1 X149.271 Y108.494 E.00863
G1 X149.161 Y108.717 E.00842
G1 X148.928 Y109.001 E.01244
G1 X148.706 Y109.169 E.0094
G1 X148.508 Y109.268 E.00751
G1 X148.248 Y109.34 E.00912
G1 X147.969 Y109.368 E.0095
G1 X102.029 Y109.368 E1.55503
G1 X101.749 Y109.34 E.0095
G1 X101.504 Y109.272 E.00862
G1 X101.28 Y109.16 E.00848
G1 X101.08 Y109.009 E.00849
G1 X100.898 Y108.81 E.0091
G1 X100.726 Y108.494 E.01218
G1 X100.658 Y108.251 E.00856
G1 X100.632 Y107.969 E.00957
G1 X100.632 Y102.027 E.20112
G1 X100.658 Y101.748 E.00951
G1 X100.769 Y101.403 E.01225
G1 X100.915 Y101.166 E.00944
G1 X101.188 Y100.898 E.01294
G1 X101.486 Y100.735 E.01149
M204 S1000
G1 X100.934 Y100.579 F10800
M204 S800
;TYPE:External perimeter
G1 F2100
G1 X101.06 Y100.493 E.00516
G1 X101.357 Y100.345 E.01124
G1 X101.673 Y100.256 E.01111
G1 X102.008 Y100.225 E.01139
G1 X148.065 Y100.228 E1.55897
G1 X148.328 Y100.256 E.00896
M73 P4 R45
G1 X148.48 Y100.292 E.00526
G1 X148.789 Y100.411 E.01124
G1 X149.067 Y100.582 E.01106
G1 X149.309 Y100.804 E.01111
G1 X149.508 Y101.065 E.01111
G1 X149.653 Y101.357 E.01103
G1 X149.742 Y101.674 E.01113
G1 X149.775 Y102.009 E.0114
G1 X149.775 Y107.987 E.20234
G1 X149.742 Y108.324 E.01147
M73 Q4 S46
G1 X149.653 Y108.641 E.01113
G1 X149.508 Y108.933 E.01103
G1 X149.306 Y109.198 E.0113
G1 X149.197 Y109.308 E.00524
G1 X148.929 Y109.511 E.01137
G1 X148.646 Y109.652 E.01071
G1 X148.324 Y109.742 E.01131
G1 X147.989 Y109.775 E.01139
G1 X102.009 Y109.775 E1.55638
G1 X101.674 Y109.742 E.01139
G1 X101.357 Y109.653 E.01113
G1 X101.065 Y109.508 E.01106
G1 X100.804 Y109.311 E.01105
G1 X100.579 Y109.064 E.01133
G1 X100.492 Y108.938 E.00518
G1 X100.345 Y108.641 E.01122
G1 X100.256 Y108.325 E.01111
G1 X100.225 Y107.988 E.01146
G1 X100.225 Y102.008 E.20239
G1 X100.256 Y101.673 E.0114
G1 X100.346 Y101.352 E.01129
G1 X100.407 Y101.213 E.00515
G1 X100.585 Y100.926 E.01141
G1 X100.684 Y100.808 E.00524
G1 X100.89 Y100.619 E.00944
M204 S1000
G1 X101.075 Y100.636 F10800
;WIPE_START
G1 F8640
G1 X101.06 Y100.493 E-.04892
G1 X101.357 Y100.345 E-.07666
G1 X101.673 Y100.256 E-.07577
G1 X102.008 Y100.225 E-.07769
G1 X104.091 Y100.225 E-.48096
;WIPE_END
G1 E-.04 F2100
G1 Z1 F720
G1 X148.288 Y100.795 F10800
G1 Z.6 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.452215
G1 F9209
G1 X148.783 Y101.29 E.02382
G1 X148.9 Y101.443 E.00656
G1 X148.985 Y101.614 E.0065
G1 X149.039 Y101.806 E.00679
G1 X149.063 Y102.148 E.01165
G1 X147.856 Y100.941 E.05809
G1 X147.277 Y100.941 E.0197
G1 X149.063 Y102.727 E.08595
G1 X149.063 Y103.305 E.0197
G1 X146.698 Y100.941 E.11382
G1 X146.119 Y100.941 E.0197
G1 X149.063 Y103.884 E.14168
G1 X149.063 Y104.463 E.0197
G1 X145.54 Y100.941 E.16954
G1 X144.961 Y100.94 E.0197
G1 X149.063 Y105.042 E.1974
G1 X149.063 Y105.621 E.0197
G1 X144.382 Y100.94 E.22526
G1 X143.804 Y100.94 E.0197
G1 X149.063 Y106.2 E.25312
G1 X149.063 Y106.778 E.0197
G1 X143.225 Y100.94 E.28098
G1 X142.646 Y100.94 E.0197
G1 X149.063 Y107.357 E.30884
G1 X149.063 Y107.936 E.0197
G1 X142.067 Y100.94 E.3367
G1 X141.488 Y100.94 E.0197
G1 X148.967 Y108.42 E.35998
G1 X148.903 Y108.55 E.00497
G1 X148.73 Y108.761 E.00927
G1 X140.909 Y100.94 E.37642
G1 X140.33 Y100.94 E.0197
G1 X148.37 Y108.98 E.38695
G1 X148.185 Y109.04 E.0066
G1 X147.954 Y109.063 E.00792
G1 X147.874 Y109.063 E.00273
G1 X139.751 Y100.94 E.39094
G1 X139.173 Y100.94 E.0197
G1 X147.295 Y109.063 E.39094
G1 X146.716 Y109.063 E.0197
G1 X138.594 Y100.94 E.39094
G1 X138.015 Y100.94 E.0197
G1 X146.137 Y109.063 E.39094
G1 X145.559 Y109.063 E.0197
G1 X137.436 Y100.94 E.39094
G1 X136.857 Y100.94 E.0197
G1 X144.98 Y109.063 E.39095
G1 X144.401 Y109.063 E.0197
G1 X136.278 Y100.94 E.39095
G1 X135.699 Y100.94 E.0197
G1 X143.822 Y109.063 E.39095
G1 X143.243 Y109.063 E.0197
G1 X135.12 Y100.94 E.39095
G1 X134.542 Y100.94 E.0197
G1 X142.664 Y109.063 E.39095
G1 X142.086 Y109.063 E.0197
G1 X133.963 Y100.94 E.39096
G1 X133.384 Y100.94 E.0197
G1 X141.507 Y109.063 E.39096
G1 X140.928 Y109.063 E.0197
G1 X132.805 Y100.94 E.39096
G1 X132.226 Y100.94 E.0197
G1 X140.349 Y109.063 E.39096
G1 X139.77 Y109.063 E.0197
G1 X131.647 Y100.94 E.39096
G1 X131.068 Y100.939 E.0197
G1 X139.191 Y109.063 E.39097
G1 X138.613 Y109.063 E.0197
G1 X130.489 Y100.939 E.39097
G1 X129.911 Y100.939 E.0197
G1 X138.034 Y109.063 E.39097
G1 X137.455 Y109.063 E.0197
G1 X129.332 Y100.939 E.39097
G1 X128.753 Y100.939 E.0197
G1 X136.876 Y109.063 E.39097
G1 X136.297 Y109.063 E.0197
G1 X128.174 Y100.939 E.39098
G1 X127.595 Y100.939 E.0197
G1 X135.718 Y109.063 E.39098
G1 X135.14 Y109.063 E.0197
G1 X127.016 Y100.939 E.39098
G1 X126.437 Y100.939 E.0197
G1 X134.561 Y109.063 E.39098
G1 X133.982 Y109.063 E.0197
G1 X125.858 Y100.939 E.39098
G1 X125.28 Y100.939 E.0197
G1 X133.403 Y109.063 E.39099
G1 X132.824 Y109.063 E.0197
G1 X124.701 Y100.939 E.39099
G1 X124.122 Y100.939 E.0197
G1 X132.245 Y109.063 E.39099
G1 X131.667 Y109.063 E.0197
G1 X123.543 Y100.939 E.39099
G1 X122.964 Y100.939 E.0197
G1 X131.088 Y109.063 E.39099
G1 X130.509 Y109.063 E.0197
G1 X122.385 Y100.939 E.391
G1 X121.806 Y100.939 E.0197
G1 X129.93 Y109.063 E.391
G1 X129.351 Y109.063 E.0197
G1 X121.227 Y100.939 E.391
G1 X120.649 Y100.939 E.0197
G1 X128.772 Y109.063 E.391
G1 X128.194 Y109.063 E.0197
G1 X120.07 Y100.939 E.391
G1 X119.491 Y100.939 E.0197
G1 X127.615 Y109.063 E.39101
G1 X127.036 Y109.063 E.0197
G1 X118.912 Y100.939 E.39101
G1 X118.333 Y100.939 E.0197
G1 X126.457 Y109.063 E.39101
G1 X125.878 Y109.063 E.0197
G1 X117.754 Y100.939 E.39101
G1 X117.175 Y100.938 E.0197
G1 X125.3 Y109.063 E.39101
G1 X124.721 Y109.063 E.0197
G1 X116.597 Y100.938 E.39102
G1 X116.018 Y100.938 E.0197
G1 X124.142 Y109.063 E.39102
G1 X123.563 Y109.063 E.0197
G1 X115.439 Y100.938 E.39102
G1 X114.86 Y100.938 E.0197
G1 X122.984 Y109.063 E.39102
G1 X122.405 Y109.063 E.0197
G1 X114.281 Y100.938 E.39102
G1 X113.702 Y100.938 E.0197
G1 X121.827 Y109.063 E.39103
G1 X121.248 Y109.063 E.0197
G1 X113.123 Y100.938 E.39103
G1 X112.544 Y100.938 E.0197
G1 X120.669 Y109.063 E.39103
G1 X120.09 Y109.063 E.0197
G1 X111.966 Y100.938 E.39103
G1 X111.387 Y100.938 E.0197
G1 X119.511 Y109.063 E.39103
G1 X118.932 Y109.063 E.0197
G1 X110.808 Y100.938 E.39104
G1 X110.229 Y100.938 E.0197
G1 X118.354 Y109.063 E.39104
G1 X117.775 Y109.063 E.0197
G1 X109.65 Y100.938 E.39104
G1 X109.071 Y100.938 E.0197
G1 X117.196 Y109.063 E.39104
G1 X116.617 Y109.063 E.0197
G1 X108.492 Y100.938 E.39104
G1 X107.913 Y100.938 E.0197
G1 X116.038 Y109.063 E.39105
G1 X115.459 Y109.063 E.0197
G1 X107.335 Y100.938 E.39105
G1 X106.756 Y100.938 E.0197
G1 X114.881 Y109.063 E.39105
G1 X114.302 Y109.063 E.0197
G1 X106.177 Y100.938 E.39105
G1 X105.598 Y100.938 E.0197
G1 X113.723 Y109.063 E.39105
G1 X113.144 Y109.063 E.0197
G1 X105.019 Y100.938 E.39106
G1 X104.44 Y100.938 E.0197
G1 X112.565 Y109.063 E.39106
G1 X111.986 Y109.063 E.0197
G1 X103.861 Y100.938 E.39106
G1 X103.282 Y100.937 E.0197
G1 X111.408 Y109.063 E.39106
G1 X110.829 Y109.063 E.0197
G1 X102.704 Y100.937 E.39106
G1 X102.125 Y100.937 E.0197
G1 X110.25 Y109.063 E.39107
G1 X109.671 Y109.063 E.0197
G1 X101.62 Y101.011 E.38752
G1 X101.436 Y101.101 E.00696
G1 X101.271 Y101.242 E.00736
G1 X109.092 Y109.063 E.37642
G1 X108.513 Y109.063 E.0197
G1 X101.032 Y101.581 E.36008
G1 X100.959 Y101.809 E.00814
G1 X100.937 Y102.065 E.00876
G1 X107.935 Y109.063 E.33678
G1 X107.356 Y109.063 E.0197
G1 X100.937 Y102.644 E.30892
G1 X100.937 Y103.223 E.0197
G1 X106.777 Y109.063 E.28106
G1 X106.198 Y109.063 E.0197
G1 X100.937 Y103.802 E.2532
G1 X100.937 Y104.381 E.0197
G1 X105.619 Y109.063 E.22534
G1 X105.04 Y109.063 E.0197
G1 X100.937 Y104.96 E.19748
G1 X100.937 Y105.538 E.0197
G1 X104.462 Y109.063 E.16962
G1 X103.883 Y109.063 E.0197
G1 X100.937 Y106.117 E.14176
G1 X100.937 Y106.696 E.0197
G1 X103.304 Y109.063 E.1139
G1 X102.725 Y109.063 E.0197
G1 X100.937 Y107.275 E.08604
G1 X100.937 Y107.854 E.0197
G1 X102.329 Y109.246 E.067
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
M106 S255
;LAYER_CHANGE
;Z:0.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;0.8
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X100.937 Y107.854 E-.45459
G1 X100.937 Y107.275 E-.13365
G1 X101.463 Y107.801 E-.17176
;WIPE_END
G1 E-.04 F2100
G1 Z1 F720
;AFTER_LAYER_CHANGE
;0.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X100.69 Y108.364 F10800
G1 Z.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F3600
G1 X100.658 Y108.251 E.00398
G1 X100.632 Y107.969 E.00957
G1 X100.632 Y102.027 E.20112
G1 X100.658 Y101.748 E.00951
G1 X100.769 Y101.403 E.01225
G1 X100.979 Y101.09 E.01276
G1 X101.266 Y100.845 E.01279
G1 X101.504 Y100.727 E.00898
G1 X101.748 Y100.658 E.00857
G1 X102.027 Y100.632 E.0095
G1 X148.072 Y100.637 E1.55856
G1 X148.36 Y100.682 E.00987
G1 X148.608 Y100.777 E.009
G1 X148.821 Y100.908 E.00846
G1 X149.007 Y101.08 E.00858
G1 X149.161 Y101.281 E.00857
G1 X149.271 Y101.504 E.00842
G1 X149.34 Y101.749 E.00863
G1 X149.368 Y102.029 E.00951
G1 X149.368 Y107.967 E.20099
G1 X149.34 Y108.249 E.00958
G1 X149.271 Y108.494 E.00863
G1 X149.161 Y108.717 E.00842
G1 X148.928 Y109.001 E.01244
G1 X148.609 Y109.223 E.01317
G1 X148.248 Y109.34 E.01282
G1 X147.969 Y109.368 E.0095
G1 X102.029 Y109.368 E1.55503
G1 X101.749 Y109.34 E.0095
G1 X101.504 Y109.272 E.00862
G1 X101.28 Y109.16 E.00848
G1 X101.08 Y109.009 E.00849
G1 X100.898 Y108.81 E.0091
G1 X100.726 Y108.494 E.01218
G1 X100.706 Y108.421 E.00255
M204 S1000
G1 X100.492 Y108.938 F10800
M204 S800
;TYPE:External perimeter
G1 F2100
G1 X100.345 Y108.641 E.01122
G1 X100.256 Y108.325 E.01111
G1 X100.225 Y107.988 E.01146
G1 X100.225 Y102.008 E.20239
G1 X100.256 Y101.673 E.0114
G1 X100.346 Y101.352 E.01129
G1 X100.407 Y101.213 E.00515
G1 X100.585 Y100.926 E.01141
G1 X100.684 Y100.808 E.00524
G1 X100.934 Y100.579 E.01147
G1 X101.06 Y100.493 E.00516
G1 X101.357 Y100.345 E.01124
G1 X101.673 Y100.256 E.01111
G1 X102.008 Y100.225 E.01139
G1 X148.095 Y100.23 E1.55998
G1 X148.48 Y100.292 E.01319
G1 X148.79 Y100.411 E.01124
G1 X149.067 Y100.582 E.01106
G1 X149.309 Y100.804 E.01111
G1 X149.508 Y101.065 E.01111
G1 X149.653 Y101.357 E.01103
G1 X149.742 Y101.674 E.01113
G1 X149.775 Y102.009 E.0114
G1 X149.775 Y107.987 E.20234
G1 X149.742 Y108.324 E.01147
G1 X149.653 Y108.641 E.01113
G1 X149.508 Y108.933 E.01103
G1 X149.306 Y109.198 E.0113
G1 X149.197 Y109.308 E.00524
G1 X148.929 Y109.511 E.01137
G1 X148.79 Y109.588 E.00539
G1 X148.646 Y109.652 E.00533
G1 X148.324 Y109.742 E.01131
G1 X147.989 Y109.775 E.01139
G1 X102.009 Y109.775 E1.55638
G1 X101.674 Y109.742 E.01139
M73 P5 R45
G1 X101.357 Y109.653 E.01113
G1 X101.065 Y109.508 E.01106
G1 X100.804 Y109.311 E.01105
G1 X100.526 Y108.987 E.01445
M204 S1000
G1 X100.644 Y108.643 F10800
;WIPE_START
G1 F8640
G1 X100.345 Y108.641 E-.09027
G1 X100.256 Y108.325 E-.07578
G1 X100.225 Y107.988 E-.0782
G1 X100.225 Y105.754 E-.51575
;WIPE_END
G1 E-.04 F2100
G1 Z1.2 F720
G1 X129.65 Y103.705 F10800
G1 Z.8 F720
G1 E.8 F2100
;TYPE:Top solid infill
;WIDTH:0.407696
G1 F3000
G1 X127.533 Y105.821 E.09081
G1 X127.017 Y105.821 E.01565
G1 X129.713 Y103.125 E.11565
G1 X130.07 Y102.252 E.02861
G1 X126.501 Y105.821 E.15309
G1 X125.985 Y105.821 E.01565
G1 X130.427 Y101.379 E.19054
M73 Q5 S46
G1 X130.617 Y100.915 E.01521
G1 X130.375 Y100.915 E.00733
G1 X125.469 Y105.821 E.21045
G1 X124.953 Y105.821 E.01565
G1 X129.86 Y100.915 E.21045
G1 X129.344 Y100.915 E.01565
G1 X124.437 Y105.821 E.21046
G1 X123.922 Y105.821 E.01565
G1 X128.828 Y100.915 E.21046
G1 X128.312 Y100.915 E.01565
G1 X123.406 Y105.821 E.21046
G1 X122.89 Y105.821 E.01565
G1 X127.796 Y100.915 E.21046
G1 X127.28 Y100.915 E.01565
G1 X122.374 Y105.821 E.21046
G1 X121.858 Y105.821 E.01565
G1 X126.765 Y100.915 E.21047
G1 X126.249 Y100.915 E.01565
G1 X121.342 Y105.821 E.21047
G1 X121.295 Y105.821 E.00143
G1 X121.061 Y105.587 E.01005
G1 X125.733 Y100.915 E.20042
G1 X125.217 Y100.915 E.01565
G1 X120.803 Y105.329 E.18935
G1 X120.545 Y105.071 E.01106
G1 X124.701 Y100.915 E.17829
G1 X124.186 Y100.915 E.01565
G1 X120.287 Y104.813 E.16723
G1 X120.029 Y104.555 E.01106
G1 X123.67 Y100.915 E.15617
G1 X123.154 Y100.915 E.01565
G1 X119.771 Y104.297 E.14511
G1 X119.642 Y104.169 E.00552
G1 X119.642 Y103.91 E.00784
G1 X122.638 Y100.914 E.1285
G1 X122.122 Y100.914 E.01565
G1 X119.642 Y103.394 E.10638
G1 X119.642 Y102.878 E.01565
G1 X121.606 Y100.914 E.08425
G1 X121.091 Y100.914 E.01565
G1 X119.642 Y102.363 E.06212
G1 X119.642 Y101.847 E.01565
G1 X120.575 Y100.914 E.04
G1 X120.059 Y100.914 E.01565
G1 X119.482 Y101.492 E.02476
;WIPE_START
G1 F8640
G1 X120.059 Y100.914 E-.18852
G1 X120.575 Y100.914 E-.1191
G1 X119.642 Y101.847 E-.30449
G1 X119.642 Y102.363 E-.11912
G1 X119.73 Y102.274 E-.02877
;WIPE_END
G1 E-.04 F2100
G1 Z1.2 F720
G1 X149.246 Y107.67 F10800
G1 Z.8 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.452231
G1 F8572
G1 X147.853 Y109.063 E.06703
G1 X147.274 Y109.063 E.0197
G1 X149.063 Y107.274 E.08607
G1 X149.063 Y106.695 E.0197
G1 X146.696 Y109.063 E.11393
G1 X146.117 Y109.063 E.0197
G1 X149.063 Y106.117 E.1418
G1 X149.063 Y105.538 E.0197
G1 X145.538 Y109.063 E.16966
G1 X144.959 Y109.063 E.0197
G1 X149.063 Y104.959 E.19752
G1 X149.063 Y104.38 E.0197
G1 X144.38 Y109.063 E.22538
G1 X143.801 Y109.063 E.0197
G1 X149.063 Y103.801 E.25324
G1 X149.063 Y103.222 E.0197
G1 X143.222 Y109.063 E.2811
G1 X142.644 Y109.063 E.0197
G1 X149.063 Y102.644 E.30896
G1 X149.063 Y102.065 E.0197
G1 X142.065 Y109.063 E.33682
G1 X141.486 Y109.063 E.0197
G1 X148.968 Y101.58 E.36014
G1 X148.9 Y101.443 E.00522
G1 X148.73 Y101.24 E.00902
G1 X140.907 Y109.063 E.37654
G1 X140.328 Y109.063 E.0197
G1 X148.376 Y101.015 E.38735
G1 X148.281 Y100.978 E.00347
G1 X148.048 Y100.942 E.00802
G1 X147.87 Y100.942 E.00606
G1 X139.749 Y109.063 E.39086
G1 X139.17 Y109.063 E.0197
G1 X147.291 Y100.942 E.39086
G1 X146.712 Y100.942 E.0197
G1 X138.592 Y109.063 E.39086
G1 X138.013 Y109.063 E.0197
G1 X146.133 Y100.942 E.39087
G1 X145.555 Y100.942 E.0197
G1 X137.434 Y109.063 E.39087
G1 X136.855 Y109.063 E.0197
G1 X144.976 Y100.942 E.39087
G1 X144.397 Y100.942 E.0197
G1 X136.276 Y109.063 E.39088
G1 X135.697 Y109.063 E.0197
G1 X143.818 Y100.942 E.39088
G1 X143.239 Y100.942 E.0197
G1 X135.118 Y109.063 E.39088
G1 X134.54 Y109.063 E.0197
G1 X142.661 Y100.942 E.39088
G1 X142.082 Y100.941 E.0197
G1 X133.961 Y109.063 E.39089
G1 X133.382 Y109.063 E.0197
G1 X141.503 Y100.941 E.39089
G1 X140.924 Y100.941 E.0197
G1 X132.803 Y109.063 E.39089
G1 X132.224 Y109.063 E.0197
G1 X140.346 Y100.941 E.3909
G1 X139.767 Y100.941 E.0197
G1 X131.645 Y109.063 E.3909
G1 X131.066 Y109.063 E.0197
G1 X139.188 Y100.941 E.3909
G1 X138.609 Y100.941 E.0197
G1 X130.488 Y109.063 E.3909
G1 X129.909 Y109.063 E.0197
G1 X138.03 Y100.941 E.39091
G1 X137.452 Y100.941 E.0197
G1 X129.33 Y109.063 E.39091
G1 X128.751 Y109.063 E.0197
G1 X136.873 Y100.941 E.39091
G1 X136.294 Y100.941 E.0197
G1 X128.172 Y109.063 E.39092
G1 X127.593 Y109.063 E.0197
G1 X135.715 Y100.941 E.39092
G1 X135.136 Y100.941 E.0197
G1 X127.014 Y109.063 E.39092
G1 X126.436 Y109.063 E.0197
G1 X134.558 Y100.941 E.39092
G1 X133.979 Y100.941 E.0197
G1 X125.857 Y109.063 E.39093
G1 X125.278 Y109.063 E.0197
G1 X133.4 Y100.941 E.39093
G1 X132.821 Y100.941 E.0197
G1 X129.772 Y103.99 E.14675
G1 X130.173 Y103.01 E.03602
G1 X132.242 Y100.94 E.09961
G1 X131.664 Y100.94 E.0197
G1 X130.574 Y102.03 E.05247
G1 X130.974 Y101.051 E.03602
G1 X131.268 Y100.757 E.01414
;WIPE_START
G1 F8640
G1 X130.974 Y101.051 E-.09592
G1 X130.574 Y102.03 E-.24437
G1 X131.664 Y100.94 E-.35595
G1 X131.94 Y100.94 E-.06376
;WIPE_END
G1 E-.04 F2100
G1 Z1.2 F720
G1 X127.957 Y105.804 F10800
G1 Z.8 F720
G1 E.8 F2100
G1 F8572
G1 X124.699 Y109.063 E.15683
G1 X124.12 Y109.063 E.0197
G1 X126.979 Y106.204 E.13761
G1 X126.4 Y106.204 E.0197
G1 X123.541 Y109.063 E.13761
G1 X122.963 Y109.063 E.0197
G1 X125.822 Y106.204 E.13761
G1 X125.243 Y106.204 E.0197
G1 X122.384 Y109.063 E.13761
G1 X121.805 Y109.063 E.0197
G1 X124.664 Y106.204 E.13761
G1 X124.085 Y106.204 E.0197
G1 X121.226 Y109.063 E.13761
G1 X120.647 Y109.063 E.0197
G1 X123.506 Y106.204 E.13761
G1 X122.927 Y106.204 E.0197
G1 X120.068 Y109.063 E.13761
G1 X119.489 Y109.063 E.0197
G1 X122.348 Y106.204 E.13761
G1 X121.77 Y106.204 E.0197
G1 X118.911 Y109.063 E.13761
G1 X118.332 Y109.063 E.0197
G1 X121.191 Y106.204 E.13761
G1 X121.137 Y106.204 E.00184
G1 X120.874 Y105.941 E.01263
G1 X117.753 Y109.063 E.15025
G1 X117.174 Y109.063 E.0197
G1 X120.585 Y105.652 E.16418
G1 X120.296 Y105.362 E.01393
G1 X116.595 Y109.063 E.17811
G1 X116.016 Y109.063 E.0197
G1 X120.006 Y105.073 E.19204
G1 X119.717 Y104.783 E.01393
G1 X115.437 Y109.063 E.20597
G1 X114.859 Y109.063 E.0197
G1 X119.427 Y104.494 E.2199
G1 X119.26 Y104.327 E.00804
G1 X119.26 Y104.082 E.00833
G1 X114.28 Y109.063 E.23972
G1 X113.701 Y109.063 E.0197
M73 Q5 S45
G1 X119.26 Y103.503 E.26758
G1 X119.26 Y102.924 E.0197
G1 X113.122 Y109.063 E.29544
G1 X112.543 Y109.063 E.0197
G1 X119.26 Y102.346 E.32331
G1 X119.26 Y101.767 E.0197
G1 X111.964 Y109.063 E.35117
G1 X111.385 Y109.063 E.0197
G1 X119.26 Y101.188 E.37903
G1 X119.26 Y100.939 E.00846
G1 X118.93 Y100.939 E.01124
G1 X110.807 Y109.063 E.391
G1 X110.228 Y109.063 E.0197
G1 X118.351 Y100.939 E.391
G1 X117.773 Y100.939 E.0197
G1 X109.649 Y109.063 E.39101
G1 X109.07 Y109.063 E.0197
G1 X117.194 Y100.939 E.39101
G1 X116.615 Y100.939 E.0197
G1 X108.491 Y109.063 E.39101
G1 X107.912 Y109.063 E.0197
G1 X116.036 Y100.939 E.39101
G1 X115.457 Y100.939 E.0197
G1 X107.333 Y109.063 E.39102
G1 X106.755 Y109.063 E.0197
G1 X114.879 Y100.939 E.39102
G1 X114.3 Y100.939 E.0197
G1 X106.176 Y109.063 E.39102
G1 X105.597 Y109.063 E.0197
G1 X113.721 Y100.939 E.39103
G1 X113.142 Y100.939 E.0197
G1 X105.018 Y109.063 E.39103
G1 X104.439 Y109.063 E.0197
G1 X112.563 Y100.938 E.39103
G1 X111.985 Y100.938 E.0197
G1 X103.86 Y109.063 E.39103
G1 X103.282 Y109.063 E.0197
G1 X111.406 Y100.938 E.39104
G1 X110.827 Y100.938 E.0197
G1 X102.703 Y109.063 E.39104
G1 X102.124 Y109.063 E.0197
G1 X110.248 Y100.938 E.39104
G1 X109.669 Y100.938 E.0197
G1 X101.62 Y108.987 E.38741
G1 X101.441 Y108.899 E.0068
G1 X101.269 Y108.76 E.00754
G1 X109.091 Y100.938 E.37648
G1 X108.512 Y100.938 E.0197
G1 X101.03 Y108.42 E.3601
G1 X100.959 Y108.195 E.00802
G1 X100.937 Y107.934 E.00892
G1 X107.933 Y100.938 E.33671
G1 X107.354 Y100.938 E.0197
G1 X100.937 Y107.355 E.30886
G1 X100.937 Y106.776 E.0197
G1 X106.775 Y100.938 E.281
G1 X106.197 Y100.938 E.0197
G1 X100.937 Y106.197 E.25314
G1 X100.937 Y105.618 E.0197
G1 X105.618 Y100.938 E.22528
G1 X105.039 Y100.938 E.0197
G1 X100.937 Y105.039 E.19742
G1 X100.937 Y104.461 E.0197
G1 X104.46 Y100.938 E.16956
G1 X103.881 Y100.938 E.0197
G1 X100.937 Y103.882 E.1417
G1 X100.937 Y103.303 E.0197
G1 X103.303 Y100.938 E.11385
G1 X102.724 Y100.937 E.0197
G1 X100.937 Y102.724 E.08599
G1 X100.937 Y102.145 E.0197
G1 X102.328 Y100.754 E.06695
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:1
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;1
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X100.937 Y102.145 E-.45418
G1 X100.937 Y102.724 E-.13366
G1 X101.465 Y102.197 E-.17216
;WIPE_END
G1 E-.04 F2100
G1 Z1.2 F720
;AFTER_LAYER_CHANGE
;1
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X123.622 Y100.635 F10800
G1 Z1 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X123.684 Y100.635 E.00209
G1 X123.684 Y101.223 E.01989
G1 X123.362 Y101.184 E.01097
G1 X123.362 Y100.635 E.01858
G1 X123.562 Y100.635 E.00676
M204 S1000
G1 X122.955 Y100.775 F10800
M204 S800
;TYPE:External perimeter
G1 F1500
G1 X122.955 Y101.588 E.02753
G1 X123.422 Y101.591 E.01579
G1 X123.62 Y101.625 E.00681
G1 X123.802 Y101.703 E.00671
G1 X123.986 Y101.823 E.00744
G1 X124.091 Y101.97 E.00611
G1 X124.091 Y100.775 E.04045
G1 X126.099 Y100.775 E.06799
G1 X126.319 Y101.381 E.02182
G1 X126.845 Y101.381 E.01779
G1 X127.077 Y100.775 E.02196
G1 X127.869 Y100.775 E.02681
G1 X126.867 Y103.225 E.0896
G1 X126.275 Y103.225 E.02002
G1 X125.597 Y101.459 E.06403
G1 X124.807 Y101.459 E.02675
G1 X124.807 Y103.225 E.05978
G1 X124.091 Y103.225 E.02424
G1 X124.091 Y102.872 E.01195
G1 X123.907 Y103.069 E.00912
G1 X123.728 Y103.16 E.00679
G1 X123.473 Y103.215 E.00884
G1 X122.239 Y103.227 E.04177
G1 X122.239 Y100.775 E.08301
G1 X122.895 Y100.775 E.02221
M204 S1000
G1 X123.319 Y100.609 F10800
;WIPE_START
G1 F8640
G1 X122.955 Y101.588 E-.18831
G1 X123.422 Y101.591 E-.10774
G1 X123.62 Y101.625 E-.04646
G1 X123.802 Y101.703 E-.04578
G1 X123.986 Y101.823 E-.05077
G1 X124.091 Y101.97 E-.04166
G1 X124.091 Y100.775 E-.27592
G1 X124.105 Y100.775 E-.00335
;WIPE_END
G1 E-.04 F2100
G1 Z1.4 F720
G1 X147.829 Y109.368 F10800
G1 Z1 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F3600
G1 X102.029 Y109.368 E1.5503
G1 X101.749 Y109.34 E.0095
M73 P6 R45
G1 X101.504 Y109.272 E.00862
G1 X101.28 Y109.16 E.00848
G1 X101.08 Y109.009 E.00849
G1 X100.844 Y108.731 E.01233
G1 X100.726 Y108.494 E.00896
G1 X100.658 Y108.251 E.00856
G1 X100.632 Y107.969 E.00957
G1 X100.632 Y102.027 E.20112
G1 X100.658 Y101.748 E.00951
G1 X100.769 Y101.403 E.01225
G1 X100.915 Y101.166 E.00944
G1 X101.188 Y100.898 E.01294
G1 X101.504 Y100.727 E.01217
G1 X101.748 Y100.658 E.00857
G1 X102.027 Y100.632 E.0095
G1 X121.832 Y100.635 E.67037
G1 X121.832 Y103.639 E.10168
G1 X123.518 Y103.621 E.05709
G1 X123.684 Y103.586 E.00573
G1 X123.684 Y103.632 E.00157
G1 X125.214 Y103.632 E.0518
G1 X125.214 Y101.866 E.05978
G1 X125.317 Y101.866 E.0035
G1 X125.996 Y103.632 E.06403
G1 X127.14 Y103.632 E.03874
G1 X128.366 Y100.636 E.10959
G1 X148.084 Y100.638 E.66744
G1 X148.377 Y100.688 E.01007
G1 X148.608 Y100.777 E.00836
G1 X148.821 Y100.908 E.00846
G1 X149.007 Y101.08 E.00858
G1 X149.161 Y101.281 E.00857
G1 X149.271 Y101.504 E.00842
G1 X149.34 Y101.749 E.00863
G1 X149.368 Y102.029 E.00951
G1 X149.368 Y107.967 E.20099
G1 X149.34 Y108.249 E.00958
G1 X149.271 Y108.494 E.00863
G1 X149.161 Y108.717 E.00842
G1 X148.928 Y109.001 E.01244
G1 X148.706 Y109.169 E.00941
G1 X148.508 Y109.268 E.00751
G1 X148.248 Y109.34 E.00912
G1 X147.889 Y109.368 E.01219
M204 S1000
;WIPE_START
G1 F8640
G1 X144.598 Y109.368 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z1.4 F720
G1 X126.695 Y100.635 F10800
G1 Z1 F720
G1 E.8 F2100
M204 S800
G1 F1500
G1 X126.585 Y100.921 E.01035
G1 X126.482 Y100.635 E.01028
M73 P6 R44
G1 X126.635 Y100.635 E.00518
M204 S1000
;WIPE_START
G1 F8640
G1 X126.585 Y100.921 E-.06689
G1 X126.482 Y100.635 E-.07014
M73 Q6 S45
G1 X126.635 Y100.635 E-.03531
;WIPE_END
G1 E-.62765 F2100
G1 Z1.4 F720
G1 X148.79 Y109.588 F10800
G1 Z1 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
G1 X148.646 Y109.652 E.00533
G1 X148.324 Y109.742 E.01131
G1 X147.989 Y109.775 E.01139
G1 X102.009 Y109.775 E1.55638
G1 X101.674 Y109.742 E.01139
G1 X101.357 Y109.653 E.01113
G1 X101.065 Y109.508 E.01106
G1 X100.804 Y109.311 E.01105
G1 X100.579 Y109.064 E.01133
G1 X100.492 Y108.938 E.00518
G1 X100.345 Y108.641 E.01122
G1 X100.256 Y108.325 E.01111
G1 X100.225 Y107.988 E.01146
G1 X100.225 Y102.008 E.20239
G1 X100.256 Y101.673 E.0114
G1 X100.346 Y101.352 E.01129
G1 X100.407 Y101.213 E.00515
G1 X100.585 Y100.926 E.01141
G1 X100.684 Y100.808 E.00524
G1 X100.934 Y100.579 E.01147
G1 X101.06 Y100.493 E.00516
G1 X101.357 Y100.345 E.01124
G1 X101.673 Y100.256 E.01111
G1 X102.008 Y100.225 E.01139
G1 X148.119 Y100.231 E1.5608
G1 X148.486 Y100.294 E.0126
G1 X148.789 Y100.411 E.01101
G1 X149.067 Y100.582 E.01106
G1 X149.309 Y100.804 E.01111
G1 X149.508 Y101.065 E.01111
G1 X149.653 Y101.357 E.01103
G1 X149.742 Y101.674 E.01113
G1 X149.775 Y102.009 E.0114
G1 X149.775 Y107.987 E.20234
G1 X149.742 Y108.324 E.01147
G1 X149.653 Y108.641 E.01113
G1 X149.508 Y108.933 E.01103
G1 X149.306 Y109.198 E.0113
G1 X149.197 Y109.308 E.00524
G1 X148.842 Y109.559 E.01471
M204 S1000
G1 X148.656 Y109.505 F10800
;WIPE_START
G1 F8640
G1 X148.646 Y109.652 E-.05017
G1 X148.324 Y109.742 E-.07712
G1 X147.989 Y109.775 E-.07773
G1 X145.585 Y109.775 E-.55498
;WIPE_END
G1 E-.04 F2100
G1 Z1.4 F720
G1 X149.202 Y101.708 F10800
G1 Z1 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.452218
G1 F9164
G1 X148.635 Y101.153 E.02699
G1 X148.472 Y101.052 E.00654
G1 X148.296 Y100.984 E.00641
G1 X148.058 Y100.943 E.00822
G1 X147.858 Y100.943 E.0068
G1 X149.063 Y102.148 E.05797
G1 X149.063 Y102.727 E.0197
G1 X147.279 Y100.943 E.08583
G1 X146.7 Y100.943 E.0197
G1 X149.063 Y103.305 E.11369
G1 X149.063 Y103.884 E.0197
G1 X146.122 Y100.943 E.14156
G1 X145.543 Y100.943 E.0197
G1 X149.063 Y104.463 E.16942
G1 X149.063 Y105.042 E.0197
G1 X144.964 Y100.943 E.19728
G1 X144.385 Y100.943 E.0197
G1 X149.063 Y105.621 E.22515
G1 X149.063 Y106.2 E.0197
G1 X143.806 Y100.943 E.25301
G1 X143.227 Y100.943 E.0197
G1 X149.063 Y106.778 E.28087
G1 X149.063 Y107.357 E.0197
G1 X142.648 Y100.943 E.30873
G1 X142.069 Y100.943 E.0197
G1 X149.063 Y107.936 E.3366
G1 X149.039 Y108.192 E.00875
G1 X148.967 Y108.42 E.00812
G1 X141.49 Y100.943 E.35988
G1 X140.911 Y100.942 E.0197
G1 X148.727 Y108.758 E.37616
G1 X148.54 Y108.911 E.00822
G1 X148.377 Y108.987 E.00611
G1 X140.332 Y100.942 E.3872
G1 X139.754 Y100.942 E.0197
G1 X147.874 Y109.063 E.39083
G1 X147.295 Y109.063 E.0197
G1 X139.175 Y100.942 E.39084
G1 X138.596 Y100.942 E.0197
G1 X146.716 Y109.063 E.39084
G1 X146.137 Y109.063 E.0197
G1 X138.017 Y100.942 E.39084
G1 X137.438 Y100.942 E.0197
G1 X145.559 Y109.063 E.39085
G1 X144.98 Y109.063 E.0197
G1 X136.859 Y100.942 E.39085
G1 X136.28 Y100.942 E.0197
G1 X144.401 Y109.063 E.39086
G1 X143.822 Y109.063 E.0197
G1 X135.701 Y100.942 E.39086
G1 X135.122 Y100.942 E.0197
G1 X143.243 Y109.063 E.39086
G1 X142.664 Y109.063 E.0197
G1 X134.543 Y100.942 E.39087
G1 X133.964 Y100.942 E.0197
G1 X142.085 Y109.063 E.39087
G1 X141.507 Y109.063 E.0197
G1 X133.386 Y100.941 E.39087
G1 X132.807 Y100.941 E.0197
G1 X140.928 Y109.063 E.39088
G1 X140.349 Y109.063 E.0197
G1 X132.228 Y100.941 E.39088
G1 X131.649 Y100.941 E.0197
G1 X139.77 Y109.063 E.39088
G1 X139.191 Y109.063 E.0197
G1 X131.07 Y100.941 E.39089
G1 X130.491 Y100.941 E.0197
G1 X138.612 Y109.063 E.39089
G1 X138.034 Y109.063 E.0197
G1 X129.912 Y100.941 E.3909
G1 X129.333 Y100.941 E.0197
G1 X137.455 Y109.063 E.3909
G1 X136.876 Y109.063 E.0197
G1 X128.754 Y100.941 E.3909
G1 X128.571 Y100.941 E.00624
G1 X128.456 Y101.222 E.01032
G1 X136.297 Y109.063 E.37739
G1 X135.718 Y109.063 E.0197
G1 X128.288 Y101.632 E.35762
G1 X128.12 Y102.043 E.01511
G1 X135.139 Y109.063 E.33785
G1 X134.561 Y109.063 E.0197
G1 X127.952 Y102.454 E.31808
G1 X127.784 Y102.865 E.01511
G1 X133.982 Y109.063 E.29831
G1 X133.403 Y109.063 E.0197
G1 X127.616 Y103.275 E.27854
G1 X127.448 Y103.686 E.01511
G1 X132.824 Y109.063 E.25876
G1 X132.245 Y109.063 E.0197
G1 X127.12 Y103.937 E.24668
G1 X126.541 Y103.937 E.0197
G1 X131.666 Y109.063 E.24668
G1 X131.088 Y109.063 E.0197
G1 X125.962 Y103.937 E.24668
G1 X125.786 Y103.937 E.00601
G1 X125.76 Y103.87 E.00246
G1 X125.386 Y103.939 E.01296
G1 X130.509 Y109.063 E.24658
G1 X129.93 Y109.063 E.0197
G1 X124.805 Y103.937 E.24668
G1 X124.226 Y103.937 E.0197
G1 X129.351 Y109.063 E.24668
G1 X128.772 Y109.063 E.0197
G1 X123.647 Y103.937 E.24668
G1 X123.062 Y103.931 E.01991
G1 X128.193 Y109.063 E.24697
G1 X127.615 Y109.063 E.0197
G1 X122.308 Y103.756 E.25542
;WIPE_START
G1 F8640
G1 X124.635 Y106.083 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z1.4 F720
G1 X121.71 Y101.421 F10800
G1 Z1 F720
G1 E.8 F2100
G1 F9164
G1 X121.228 Y100.94 E.02316
G1 X120.649 Y100.94 E.0197
G1 X121.526 Y101.817 E.04221
G1 X121.526 Y102.396 E.0197
G1 X120.071 Y100.94 E.07007
G1 X119.492 Y100.94 E.0197
G1 X121.71 Y103.158 E.10675
;WIPE_START
G1 F8640
G1 X119.492 Y100.94 E-.72425
G1 X119.646 Y100.94 E-.03575
;WIPE_END
G1 E-.04 F2100
G1 Z1.4 F720
G1 X118.73 Y100.756 F10800
G1 Z1 F720
G1 E.8 F2100
G1 F9164
G1 X121.526 Y103.553 E.13461
G1 X121.526 Y103.947 E.0134
G1 X121.916 Y103.943 E.01327
G1 X127.036 Y109.063 E.24641
G1 X126.457 Y109.063 E.0197
G1 X118.334 Y100.94 E.39097
G1 X117.755 Y100.939 E.0197
G1 X125.878 Y109.063 E.39097
G1 X125.299 Y109.063 E.0197
G1 X117.176 Y100.939 E.39097
G1 X116.597 Y100.939 E.0197
G1 X124.72 Y109.063 E.39098
G1 X124.142 Y109.063 E.0197
G1 X116.018 Y100.939 E.39098
G1 X115.439 Y100.939 E.0197
G1 X123.563 Y109.063 E.39099
G1 X122.984 Y109.063 E.0197
G1 X114.86 Y100.939 E.39099
G1 X114.281 Y100.939 E.0197
G1 X122.405 Y109.063 E.39099
G1 X121.826 Y109.063 E.0197
G1 X113.703 Y100.939 E.391
G1 X113.124 Y100.939 E.0197
G1 X121.247 Y109.063 E.391
G1 X120.669 Y109.063 E.0197
G1 X112.545 Y100.939 E.391
G1 X111.966 Y100.939 E.0197
G1 X120.09 Y109.063 E.39101
G1 X119.511 Y109.063 E.0197
G1 X111.387 Y100.939 E.39101
G1 X110.808 Y100.939 E.0197
G1 X118.932 Y109.063 E.39101
G1 X118.353 Y109.063 E.0197
G1 X110.229 Y100.938 E.39102
G1 X109.65 Y100.938 E.0197
G1 X117.774 Y109.063 E.39102
G1 X117.196 Y109.063 E.0197
G1 X109.071 Y100.938 E.39103
G1 X108.492 Y100.938 E.0197
G1 X116.617 Y109.063 E.39103
G1 X116.038 Y109.063 E.0197
G1 X107.913 Y100.938 E.39103
G1 X107.335 Y100.938 E.0197
G1 X115.459 Y109.063 E.39104
G1 X114.88 Y109.063 E.0197
G1 X106.756 Y100.938 E.39104
G1 X106.177 Y100.938 E.0197
G1 X114.301 Y109.063 E.39104
G1 X113.723 Y109.063 E.0197
G1 X105.598 Y100.938 E.39105
G1 X105.019 Y100.938 E.0197
G1 X113.144 Y109.063 E.39105
G1 X112.565 Y109.063 E.0197
G1 X104.44 Y100.938 E.39105
G1 X103.861 Y100.938 E.0197
G1 X111.986 Y109.063 E.39106
G1 X111.407 Y109.063 E.0197
G1 X103.282 Y100.938 E.39106
G1 X102.703 Y100.937 E.0197
G1 X110.828 Y109.063 E.39107
G1 X110.25 Y109.063 E.0197
G1 X102.124 Y100.937 E.39107
G1 X102.041 Y100.937 E.00283
G1 X101.803 Y100.959 E.00812
G1 X101.619 Y101.011 E.00651
G1 X109.671 Y109.063 E.38751
G1 X109.092 Y109.063 E.0197
G1 X101.272 Y101.243 E.37636
G1 X101.155 Y101.358 E.00558
G1 X101.032 Y101.581 E.00869
G1 X108.513 Y109.063 E.36007
G1 X107.934 Y109.063 E.0197
G1 X100.937 Y102.066 E.33676
G1 X100.937 Y102.645 E.0197
G1 X107.355 Y109.063 E.3089
G1 X106.777 Y109.063 E.0197
G1 X100.937 Y103.223 E.28104
G1 X100.937 Y103.802 E.0197
G1 X106.198 Y109.063 E.25318
G1 X105.619 Y109.063 E.0197
G1 X100.937 Y104.381 E.22532
G1 X100.937 Y104.96 E.0197
G1 X105.04 Y109.063 E.19746
G1 X104.461 Y109.063 E.0197
G1 X100.937 Y105.539 E.1696
G1 X100.937 Y106.118 E.0197
G1 X103.882 Y109.063 E.14174
G1 X103.304 Y109.063 E.0197
G1 X100.937 Y106.696 E.11389
G1 X100.937 Y107.275 E.0197
G1 X102.725 Y109.063 E.08603
G1 X102.146 Y109.063 E.0197
G1 X100.937 Y107.854 E.05817
G1 X100.959 Y108.195 E.01162
G1 X101.011 Y108.378 E.00649
G1 X101.149 Y108.632 E.00982
G1 X101.706 Y109.201 E.02711
;WIPE_START
G1 F8640
G1 X101.149 Y108.632 E-.18394
G1 X101.011 Y108.378 E-.06662
G1 X100.959 Y108.195 E-.04402
G1 X100.937 Y107.854 E-.07885
G1 X102.121 Y109.038 E-.38657
;WIPE_END
G1 E-.04 F2100
G1 Z1.4 F720
G1 X122.035 Y100.501 F10800
G1 Z1 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.183226
G1 F2400
G1 X123.158 Y100.501 E.0131
G1 X123.887 Y100.501 F10800
;WIDTH:0.182986
G1 F2400
G1 X126.217 Y100.502 E.02713
G1 X126.964 Y100.502 F10800
;WIDTH:0.182586
G1 F2400
G1 X128.201 Y100.502 E.01436
;WIPE_START
G1 F8640
G1 X126.964 Y100.502 E-.28561
;WIPE_END
G1 E-.51439 F2100
G1 Z1.4 F720
G1 X125.44 Y102.814 F10800
G1 Z1 F720
M73 P7 R44
G1 E.8 F2100
;WIDTH:0.142426
G1 F2400
G1 X125.468 Y102.969 E.00131
;WIDTH:0.187932
G1 X125.497 Y103.125 E.00191
;WIDTH:0.233438
G1 X125.526 Y103.281 E.00251
;WIDTH:0.278944
G1 X125.555 Y103.436 E.00311
;WIDTH:0.32445
G1 X125.584 Y103.592 E.00371
;WIPE_START
G1 F8640
G1 X125.555 Y103.436 E-.03656
;WIPE_END
G1 E-.76344 F2100
G1 Z1.4 F720
G1 X126.578 Y102.082 F10800
G1 Z1 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F1500
G1 X126.572 Y102.045 E.00128
M204 S1000
;WIPE_START
G1 F8640
G1 X126.572 Y102.045 E0
;WIPE_END
G1 E-.8 F2100
G1 Z1.4 F720
G1 X123.49 Y102.423 F10800
G1 Z1 F720
G1 E.8 F2100
M204 S800
G1 F1500
G1 X123.468 Y102.495 E.00255
G1 X123.434 Y102.522 E.00149
G1 X122.955 Y102.532 E.0162
G1 X122.955 Y102.274 E.00875
G1 X123.294 Y102.274 E.01146
G1 X123.444 Y102.308 E.00521
G1 X123.477 Y102.364 E.00222
M204 S1000
G1 X123.429 Y102.468 F10800
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:1.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;1.2
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X123.468 Y102.495 E-.03027
G1 X123.434 Y102.522 E-.01015
G1 X122.955 Y102.532 E-.11053
G1 X122.955 Y102.274 E-.05972
G1 X123.294 Y102.274 E-.07818
G1 X123.444 Y102.308 E-.03552
G1 X123.477 Y102.364 E-.01511
;WIPE_END
G1 E-.46051 F2100
G1 Z1.4 F720
;AFTER_LAYER_CHANGE
;1.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X123.67 Y101.22 F10800
G1 Z1.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F1500
G1 X123.362 Y101.184 E.01051
G1 X123.362 Y100.635 E.01856
G1 X123.684 Y100.636 E.01089
G1 X123.684 Y101.176 E.0183
M204 S1000
G1 X124.071 Y101.942 F10800
M204 S800
;TYPE:External perimeter
G1 F1500
G1 X124.091 Y101.97 E.00116
G1 X124.091 Y100.775 E.04045
G1 X126.099 Y100.775 E.06799
G1 X126.319 Y101.381 E.02182
G1 X126.845 Y101.381 E.01779
G1 X127.077 Y100.775 E.02196
G1 X127.869 Y100.775 E.02681
G1 X126.867 Y103.225 E.0896
G1 X126.275 Y103.225 E.02002
G1 X125.597 Y101.459 E.06403
G1 X124.807 Y101.459 E.02675
G1 X124.807 Y103.225 E.05978
G1 X124.091 Y103.225 E.02424
G1 X124.091 Y102.872 E.01195
G1 X123.907 Y103.069 E.00912
G1 X123.728 Y103.16 E.00679
G1 X123.473 Y103.215 E.00884
G1 X122.239 Y103.227 E.04177
G1 X122.239 Y100.775 E.08301
G1 X122.955 Y100.775 E.02424
G1 X122.955 Y101.588 E.02753
G1 X123.422 Y101.591 E.01579
G1 X123.62 Y101.625 E.00681
G1 X123.802 Y101.703 E.00671
G1 X123.986 Y101.823 E.00744
G1 X124.036 Y101.893 E.00292
M204 S1000
G1 X124.105 Y101.936 F10800
;WIPE_START
G1 F8640
G1 X124.091 Y101.97 E-.02177
G1 X124.091 Y100.775 E-.27592
G1 X126.093 Y100.775 E-.46232
;WIPE_END
G1 E-.04 F2100
G1 Z1.6 F720
G1 X147.829 Y109.368 F10800
G1 Z1.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F3600
M73 Q7 S45
G1 X102.029 Y109.368 E1.5503
G1 X101.749 Y109.34 E.0095
G1 X101.504 Y109.272 E.00862
G1 X101.28 Y109.16 E.00848
G1 X101.08 Y109.009 E.00849
G1 X100.844 Y108.731 E.01233
G1 X100.726 Y108.494 E.00896
G1 X100.658 Y108.251 E.00856
G1 X100.632 Y107.969 E.00957
G1 X100.632 Y102.027 E.20112
G1 X100.658 Y101.748 E.00951
G1 X100.769 Y101.403 E.01225
G1 X100.915 Y101.166 E.00944
G1 X101.188 Y100.898 E.01294
G1 X101.504 Y100.727 E.01217
G1 X101.748 Y100.658 E.00857
G1 X102.027 Y100.632 E.0095
G1 X121.832 Y100.635 E.67037
G1 X121.832 Y103.639 E.10166
G1 X123.518 Y103.621 E.05709
G1 X123.684 Y103.586 E.00573
G1 X123.684 Y103.632 E.00157
G1 X125.214 Y103.632 E.0518
G1 X125.214 Y101.866 E.05978
G1 X125.317 Y101.866 E.0035
G1 X125.996 Y103.632 E.06403
G1 X127.14 Y103.632 E.03874
G1 X128.366 Y100.636 E.10956
G1 X148.112 Y100.639 E.66838
G1 X148.374 Y100.687 E.00904
G1 X148.608 Y100.777 E.00847
G1 X148.821 Y100.908 E.00846
G1 X149.007 Y101.08 E.00858
G1 X149.161 Y101.281 E.00857
G1 X149.271 Y101.504 E.00842
G1 X149.34 Y101.749 E.00863
G1 X149.368 Y102.029 E.00951
G1 X149.368 Y107.967 E.20099
G1 X149.34 Y108.249 E.00958
G1 X149.271 Y108.494 E.00863
G1 X149.161 Y108.717 E.00842
G1 X148.928 Y109.001 E.01244
G1 X148.706 Y109.169 E.0094
G1 X148.508 Y109.268 E.00751
G1 X148.248 Y109.34 E.00912
G1 X147.889 Y109.368 E.01219
M204 S1000
;WIPE_START
G1 F8640
G1 X144.598 Y109.368 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z1.6 F720
G1 X126.694 Y100.636 F10800
G1 Z1.2 F720
G1 E.8 F2100
M204 S800
G1 F1500
G1 X126.585 Y100.921 E.01032
G1 X126.482 Y100.636 E.01026
G1 X126.634 Y100.636 E.00516
M204 S1000
;WIPE_START
G1 F8640
G1 X126.585 Y100.921 E-.06672
G1 X126.482 Y100.636 E-.06996
G1 X126.634 Y100.636 E-.03519
;WIPE_END
G1 E-.62812 F2100
G1 Z1.6 F720
G1 X148.79 Y109.588 F10800
G1 Z1.2 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
G1 X148.646 Y109.652 E.00533
G1 X148.324 Y109.742 E.01131
G1 X147.989 Y109.775 E.01139
G1 X102.009 Y109.775 E1.55638
G1 X101.674 Y109.742 E.01139
G1 X101.357 Y109.653 E.01113
G1 X101.065 Y109.508 E.01106
G1 X100.804 Y109.311 E.01105
G1 X100.579 Y109.064 E.01133
G1 X100.492 Y108.938 E.00518
G1 X100.345 Y108.641 E.01122
G1 X100.256 Y108.325 E.01111
G1 X100.225 Y107.988 E.01146
G1 X100.225 Y102.008 E.20239
G1 X100.256 Y101.673 E.0114
G1 X100.346 Y101.352 E.01129
G1 X100.407 Y101.213 E.00515
G1 X100.585 Y100.926 E.01141
G1 X100.684 Y100.808 E.00524
G1 X100.934 Y100.579 E.01148
G1 X101.06 Y100.493 E.00516
G1 X101.357 Y100.345 E.01124
G1 X101.673 Y100.256 E.01111
G1 X102.008 Y100.225 E.01139
G1 X148.148 Y100.232 E1.5618
G1 X148.485 Y100.294 E.01157
G1 X148.79 Y100.411 E.01105
G1 X149.067 Y100.582 E.01106
G1 X149.309 Y100.804 E.01111
G1 X149.508 Y101.065 E.01111
G1 X149.653 Y101.357 E.01103
G1 X149.742 Y101.674 E.01113
G1 X149.775 Y102.009 E.0114
G1 X149.775 Y107.987 E.20234
G1 X149.742 Y108.324 E.01147
G1 X149.653 Y108.641 E.01113
G1 X149.508 Y108.933 E.01103
G1 X149.306 Y109.198 E.0113
G1 X149.197 Y109.308 E.00524
G1 X148.842 Y109.559 E.01471
M204 S1000
G1 X148.656 Y109.505 F10800
;WIPE_START
G1 F8640
G1 X148.646 Y109.652 E-.05018
G1 X148.324 Y109.742 E-.07712
G1 X147.989 Y109.775 E-.07773
G1 X145.585 Y109.775 E-.55498
;WIPE_END
G1 E-.04 F2100
G1 Z1.6 F720
G1 X147.778 Y109.248 F10800
G1 Z1.2 F720
G1 E.8 F2100
;TYPE:Top solid infill
;WIDTH:0.400063
G1 F3000
G1 X149.088 Y107.938 E.05502
G1 X149.088 Y107.433 E.015
G1 X147.433 Y109.088 E.06948
G1 X146.928 Y109.088 E.015
G1 X149.088 Y106.928 E.09069
G1 X149.088 Y106.423 E.015
G1 X146.423 Y109.088 E.11191
G1 X145.918 Y109.088 E.015
G1 X149.088 Y105.918 E.13312
G1 X149.088 Y105.413 E.015
G1 X145.413 Y109.088 E.15433
G1 X144.908 Y109.088 E.015
G1 X149.088 Y104.908 E.17554
G1 X149.088 Y104.403 E.015
G1 X144.403 Y109.088 E.19675
G1 X143.898 Y109.088 E.015
G1 X149.088 Y103.898 E.21796
G1 X149.088 Y103.393 E.015
G1 X143.393 Y109.088 E.23918
G1 X142.888 Y109.088 E.015
G1 X149.088 Y102.888 E.26039
G1 X149.088 Y102.382 E.015
G1 X142.382 Y109.088 E.2816
G1 X141.877 Y109.088 E.015
G1 X149.073 Y101.892 E.30219
G1 X149.009 Y101.605 E.00874
G1 X148.958 Y101.502 E.0034
G1 X141.372 Y109.088 E.31856
G1 X140.867 Y109.088 E.015
G1 X148.74 Y101.215 E.33064
G1 X148.651 Y101.133 E.00361
G1 X148.438 Y101.012 E.00726
G1 X140.362 Y109.088 E.33916
G1 X139.857 Y109.088 E.015
G1 X148.025 Y100.92 E.34303
G1 X147.52 Y100.92 E.015
G1 X139.352 Y109.088 E.34303
G1 X138.847 Y109.088 E.015
G1 X147.015 Y100.92 E.34304
G1 X146.51 Y100.919 E.015
G1 X138.342 Y109.088 E.34304
G1 X137.837 Y109.088 E.015
G1 X146.005 Y100.919 E.34304
G1 X145.5 Y100.919 E.015
G1 X137.332 Y109.088 E.34305
G1 X136.827 Y109.088 E.015
G1 X144.995 Y100.919 E.34305
G1 X144.49 Y100.919 E.015
G1 X136.322 Y109.088 E.34305
G1 X135.816 Y109.088 E.015
G1 X143.985 Y100.919 E.34306
G1 X143.48 Y100.919 E.015
G1 X135.311 Y109.088 E.34306
G1 X134.806 Y109.088 E.015
G1 X142.975 Y100.919 E.34306
G1 X142.47 Y100.919 E.015
G1 X134.301 Y109.088 E.34307
G1 X133.796 Y109.088 E.015
G1 X141.965 Y100.919 E.34307
G1 X141.46 Y100.919 E.015
G1 X133.291 Y109.088 E.34308
G1 X132.786 Y109.088 E.015
G1 X140.955 Y100.919 E.34308
G1 X140.45 Y100.918 E.015
G1 X132.281 Y109.088 E.34308
G1 X131.776 Y109.088 E.015
G1 X139.945 Y100.918 E.34309
G1 X139.44 Y100.918 E.015
G1 X131.271 Y109.088 E.34309
G1 X130.766 Y109.088 E.015
G1 X138.935 Y100.918 E.34309
G1 X138.43 Y100.918 E.015
G1 X130.261 Y109.088 E.3431
G1 X129.756 Y109.088 E.015
G1 X137.925 Y100.918 E.3431
G1 X137.42 Y100.918 E.015
G1 X129.25 Y109.088 E.3431
G1 X128.745 Y109.088 E.015
G1 X136.915 Y100.918 E.34311
G1 X136.41 Y100.918 E.015
G1 X128.24 Y109.088 E.34311
G1 X127.735 Y109.088 E.015
G1 X135.905 Y100.918 E.34311
G1 X135.4 Y100.918 E.015
M73 Q7 S44
G1 X127.23 Y109.088 E.34312
G1 X126.725 Y109.088 E.015
G1 X134.895 Y100.918 E.34312
G1 X134.39 Y100.918 E.015
G1 X126.22 Y109.088 E.34312
G1 X125.715 Y109.088 E.015
G1 X133.885 Y100.917 E.34313
G1 X133.38 Y100.917 E.015
G1 X125.21 Y109.088 E.34313
G1 X124.705 Y109.088 E.015
G1 X132.875 Y100.917 E.34313
G1 X132.37 Y100.917 E.015
G1 X124.2 Y109.088 E.34314
G1 X123.695 Y109.088 E.015
G1 X131.865 Y100.917 E.34314
G1 X131.36 Y100.917 E.015
G1 X123.19 Y109.088 E.34314
G1 X122.684 Y109.088 E.015
G1 X130.855 Y100.917 E.34315
G1 X130.35 Y100.917 E.015
G1 X122.179 Y109.088 E.34315
G1 X121.674 Y109.088 E.015
G1 X126.85 Y103.912 E.21735
G1 X127.328 Y103.912 E.01422
G1 X127.66 Y103.102 E.02599
G1 X129.845 Y100.917 E.09178
G1 X129.34 Y100.917 E.015
G1 X128.009 Y102.248 E.05589
G1 X128.359 Y101.393 E.02742
G1 X128.996 Y100.756 E.02675
;WIPE_START
G1 F8640
G1 X128.359 Y101.393 E-.20797
G1 X128.009 Y102.248 E-.21322
G1 X129.047 Y101.21 E-.3388
;WIPE_END
G1 E-.04 F2100
G1 Z1.6 F720
G1 X126.505 Y103.752 F10800
G1 Z1.2 F720
G1 E.8 F2100
G1 F3000
G1 X121.169 Y109.088 E.22409
G1 X120.664 Y109.088 E.015
G1 X125.839 Y103.912 E.21735
G1 X125.803 Y103.912 E.00108
G1 X125.776 Y103.842 E.00225
G1 X125.321 Y103.926 E.01375
G1 X120.159 Y109.088 E.21677
G1 X119.654 Y109.088 E.015
G1 X124.829 Y103.912 E.21735
G1 X124.324 Y103.912 E.015
G1 X119.149 Y109.088 E.21735
G1 X118.644 Y109.088 E.015
G1 X123.819 Y103.912 E.21735
G1 X123.323 Y103.904 E.01474
G1 X118.139 Y109.088 E.21771
G1 X117.634 Y109.088 E.015
G1 X122.812 Y103.909 E.21749
G1 X122.302 Y103.914 E.01515
G1 X117.129 Y109.088 E.21728
G1 X116.624 Y109.088 E.015
G1 X121.792 Y103.919 E.21706
G1 X121.551 Y103.922 E.00714
G1 X121.551 Y103.655 E.00793
G1 X116.118 Y109.088 E.22817
G1 X115.613 Y109.088 E.015
G1 X121.551 Y103.15 E.24938
G1 X121.551 Y102.645 E.015
G1 X115.108 Y109.088 E.27059
G1 X114.603 Y109.088 E.015
G1 X121.551 Y102.139 E.2918
G1 X121.551 Y101.634 E.015
G1 X114.098 Y109.088 E.31302
G1 X113.593 Y109.088 E.015
G1 X121.551 Y101.129 E.33423
G1 X121.551 Y100.915 E.00635
M73 P8 R44
G1 X121.26 Y100.915 E.00865
G1 X113.088 Y109.088 E.34321
G1 X112.583 Y109.088 E.015
G1 X120.755 Y100.915 E.34321
G1 X120.25 Y100.915 E.015
G1 X112.078 Y109.088 E.34322
G1 X111.573 Y109.088 E.015
G1 X119.745 Y100.915 E.34322
G1 X119.24 Y100.915 E.015
G1 X111.068 Y109.088 E.34322
G1 X110.563 Y109.088 E.015
G1 X118.735 Y100.915 E.34323
G1 X118.23 Y100.915 E.015
G1 X110.058 Y109.088 E.34323
G1 X109.552 Y109.088 E.015
G1 X117.725 Y100.915 E.34323
G1 X117.22 Y100.915 E.015
G1 X109.047 Y109.088 E.34324
G1 X108.542 Y109.088 E.015
G1 X116.715 Y100.915 E.34324
G1 X116.21 Y100.915 E.015
G1 X108.037 Y109.088 E.34324
G1 X107.532 Y109.088 E.015
G1 X115.705 Y100.915 E.34325
G1 X115.2 Y100.914 E.015
M73 Q8 S44
G1 X107.027 Y109.088 E.34325
G1 X106.522 Y109.088 E.015
G1 X114.695 Y100.914 E.34325
G1 X114.19 Y100.914 E.015
G1 X106.017 Y109.088 E.34326
G1 X105.512 Y109.088 E.015
G1 X113.685 Y100.914 E.34326
G1 X113.18 Y100.914 E.015
G1 X105.007 Y109.088 E.34326
G1 X104.502 Y109.088 E.015
M73 P8 R43
G1 X112.675 Y100.914 E.34327
G1 X112.17 Y100.914 E.015
G1 X103.997 Y109.088 E.34327
G1 X103.492 Y109.088 E.015
G1 X111.665 Y100.914 E.34327
G1 X111.16 Y100.914 E.015
G1 X102.986 Y109.088 E.34328
G1 X102.481 Y109.088 E.015
G1 X110.655 Y100.914 E.34328
G1 X110.15 Y100.914 E.015
G1 X101.982 Y109.082 E.34304
G1 X101.801 Y109.064 E.0054
G1 X101.568 Y108.991 E.00725
G1 X109.645 Y100.914 E.33921
G1 X109.14 Y100.914 E.015
G1 X101.261 Y108.792 E.33089
G1 X101.128 Y108.646 E.00586
G1 X101.049 Y108.5 E.00495
G1 X108.635 Y100.913 E.31862
G1 X108.13 Y100.913 E.015
G1 X100.927 Y108.117 E.30251
G1 X100.912 Y107.626 E.01457
G1 X107.625 Y100.913 E.28193
G1 X107.12 Y100.913 E.015
G1 X100.912 Y107.121 E.26072
G1 X100.912 Y106.616 E.015
G1 X106.615 Y100.913 E.23951
G1 X106.11 Y100.913 E.015
G1 X100.912 Y106.111 E.2183
G1 X100.912 Y105.606 E.015
G1 X105.605 Y100.913 E.19709
G1 X105.1 Y100.913 E.015
G1 X100.912 Y105.101 E.17588
G1 X100.912 Y104.596 E.015
G1 X104.595 Y100.913 E.15467
G1 X104.09 Y100.913 E.015
G1 X100.912 Y104.091 E.13347
G1 X100.912 Y103.586 E.015
G1 X103.585 Y100.913 E.11226
G1 X103.08 Y100.913 E.015
G1 X100.912 Y103.081 E.09105
G1 X100.912 Y102.575 E.015
G1 X102.575 Y100.912 E.06984
G1 X102.07 Y100.912 E.015
G1 X100.752 Y102.231 E.05538
;WIPE_START
G1 F8640
G1 X102.07 Y100.912 E-.43061
G1 X102.575 Y100.912 E-.1166
G1 X101.924 Y101.564 E-.21279
;WIPE_END
G1 E-.04 F2100
G1 Z1.6 F720
G1 X122.035 Y100.502 F10800
G1 Z1.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.182646
G1 F2400
G1 X123.158 Y100.502 E.01305
G1 X123.887 Y100.502 F10800
;WIDTH:0.182352
G1 F2400
G1 X126.217 Y100.502 E.02701
G1 X126.964 Y100.502 F10800
;WIDTH:0.181863
G1 F2400
G1 X128.201 Y100.502 E.01429
;WIPE_START
G1 F8640
G1 X126.964 Y100.502 E-.2856
;WIPE_END
G1 E-.5144 F2100
G1 Z1.6 F720
G1 X125.44 Y102.814 F10800
G1 Z1.2 F720
G1 E.8 F2100
;WIDTH:0.142426
G1 F2400
G1 X125.468 Y102.969 E.00131
;WIDTH:0.187932
G1 X125.497 Y103.125 E.00191
;WIDTH:0.233438
G1 X125.526 Y103.281 E.00251
;WIDTH:0.278944
G1 X125.555 Y103.436 E.00311
;WIDTH:0.32445
G1 X125.584 Y103.592 E.00371
;WIPE_START
G1 F8640
G1 X125.555 Y103.436 E-.03656
;WIPE_END
G1 E-.76344 F2100
G1 Z1.6 F720
G1 X126.58 Y102.087 F10800
G1 Z1.2 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F1500
G1 X126.564 Y102.045 E.00153
G1 X126.58 Y102.045 E.00054
M204 S1000
G1 X126.612 Y102.056 F10800
;WIPE_START
G1 F8640
G1 X126.564 Y102.045 E-.00369
G1 X126.58 Y102.045 E-.00369
;WIPE_END
G1 E-.79262 F2100
G1 Z1.6 F720
G1 X123.49 Y102.423 F10800
G1 Z1.2 F720
G1 E.8 F2100
M204 S800
G1 F1500
G1 X123.468 Y102.495 E.00255
G1 X123.434 Y102.522 E.00149
G1 X122.955 Y102.532 E.0162
G1 X122.955 Y102.273 E.00877
G1 X123.388 Y102.285 E.01468
G1 X123.459 Y102.317 E.00263
G1 X123.477 Y102.364 E.00171
M204 S1000
G1 X123.425 Y102.462 F10800
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:1.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;1.4
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X123.468 Y102.495 E-.03027
G1 X123.434 Y102.522 E-.01015
G1 X122.955 Y102.532 E-.11053
G1 X122.955 Y102.273 E-.05981
G1 X123.388 Y102.285 E-.10011
G1 X123.459 Y102.317 E-.01794
G1 X123.477 Y102.364 E-.01168
;WIPE_END
G1 E-.45951 F2100
G1 Z1.6 F720
;AFTER_LAYER_CHANGE
;1.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z1.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z1.8 F720
G1 X146.063 Y103.708 F10800
G1 Z1.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z1.8 F720
G1 X106.966 Y106.868 F10800
G1 Z1.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z1.8 F720
G1 X103.937 Y106.292 F10800
G1 Z1.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:1.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;1.6
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z1.8 F720
;AFTER_LAYER_CHANGE
;1.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z1.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z2 F720
G1 X146.063 Y103.708 F10800
G1 Z1.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z2 F720
G1 X106.966 Y106.868 F10800
G1 Z1.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z2 F720
G1 X103.937 Y106.292 F10800
G1 Z1.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:1.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;1.8
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z2 F720
;AFTER_LAYER_CHANGE
;1.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z1.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
M73 P9 R43
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z2.2 F720
G1 X146.063 Y103.708 F10800
G1 Z1.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z2.2 F720
G1 X106.966 Y106.868 F10800
G1 Z1.8 F720
M73 Q9 S44
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z2.2 F720
G1 X103.937 Y106.292 F10800
G1 Z1.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;2
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z2.2 F720
;AFTER_LAYER_CHANGE
;2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z2.4 F720
G1 X146.063 Y103.708 F10800
G1 Z2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z2.4 F720
G1 X106.966 Y106.868 F10800
G1 Z2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z2.4 F720
G1 X103.937 Y106.292 F10800
G1 Z2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:2.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;2.2
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z2.4 F720
;AFTER_LAYER_CHANGE
;2.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z2.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z2.6 F720
G1 X146.063 Y103.708 F10800
G1 Z2.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z2.6 F720
G1 X106.966 Y106.868 F10800
G1 Z2.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z2.6 F720
G1 X103.937 Y106.292 F10800
G1 Z2.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:2.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;2.4
 M104 S230 M109 S230 








;WIPE_START
M73 Q9 S43
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z2.6 F720
;AFTER_LAYER_CHANGE
;2.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z2.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z2.8 F720
G1 X146.063 Y103.708 F10800
G1 Z2.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z2.8 F720
G1 X106.966 Y106.868 F10800
G1 Z2.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
M73 P10 R43
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z2.8 F720
G1 X103.937 Y106.292 F10800
G1 Z2.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:2.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;2.6
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z2.8 F720
;AFTER_LAYER_CHANGE
;2.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z2.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
M73 Q10 S43
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z3 F720
G1 X146.063 Y103.708 F10800
G1 Z2.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z3 F720
G1 X106.966 Y106.868 F10800
G1 Z2.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
M73 P10 R42
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z3 F720
G1 X103.937 Y106.292 F10800
G1 Z2.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:2.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;2.8
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z3 F720
;AFTER_LAYER_CHANGE
;2.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z2.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z3.2 F720
G1 X146.063 Y103.708 F10800
G1 Z2.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z3.2 F720
G1 X106.966 Y106.868 F10800
G1 Z2.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z3.2 F720
G1 X103.937 Y106.292 F10800
G1 Z2.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X105.658 Y103.437 E.01721
G1 X105.715 Y103.576 E.00506
G1 X105.227 Y104.064 E.02339
G1 X104.775 Y104.064 E.0153
G1 X104.289 Y103.568 E.02349
;WIPE_START
G1 F8640
G1 X104.775 Y104.064 E-.16026
G1 X105.227 Y104.064 E-.10435
G1 X105.715 Y103.576 E-.15953
G1 X105.658 Y103.437 E-.03453
G1 X106.166 Y103.437 E-.11743
G1 X106.73 Y104.001 E-.1839
;WIPE_END
G1 E-.04 F2100
G1 Z3.2 F720
G1 X105.358 Y103.299 F10800
G1 Z2.8 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.531415
G1 F900
G1 X104.842 Y103.815 E.02964
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:3
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;3
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X105.358 Y103.299 E-.16849
;WIPE_END
G1 E-.63151 F2100
G1 Z3.2 F720
;AFTER_LAYER_CHANGE
;3
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z3 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z3.4 F720
G1 X146.063 Y103.708 F10800
G1 Z3 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z3.4 F720
G1 X106.966 Y106.868 F10800
G1 Z3 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z3.4 F720
G1 X103.937 Y106.292 F10800
G1 Z3 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X105.658 Y103.437 E.01721
G1 X105.715 Y103.576 E.00506
G1 X105.227 Y104.064 E.02339
G1 X104.775 Y104.064 E.0153
G1 X104.289 Y103.568 E.02349
G1 X105.028 Y103.254 F10800
;TYPE:Solid infill
;WIDTH:0.531415
G1 F900
G1 X105.374 Y103.6 E.01987
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:3.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;3.2
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X105.028 Y103.254 E-.11293
;WIPE_END
G1 E-.68707 F2100
G1 Z3.4 F720
;AFTER_LAYER_CHANGE
;3.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z3.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
M73 P11 R42
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z3.6 F720
G1 X146.063 Y103.708 F10800
G1 Z3.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z3.6 F720
G1 X105.268 Y103.532 F10800
G1 Z3.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.07101
G1 X107.366 Y106.868 E.11291
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X105.208 Y103.532 E.05333
M204 S1000
G1 X104.868 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X106.147 Y103.125 E.04329
G1 X106.147 Y102.725 E.01354
G1 X106.467 Y102.725 E.01086
G1 X106.467 Y103.125 E.01354
G1 X107.676 Y103.125 E.04091
G1 X107.676 Y102.725 E.01354
G1 X107.773 Y102.725 E.00327
G1 X107.773 Y107.275 E.15401
G1 X103.225 Y107.275 E.15393
M73 Q11 S43
G1 X103.225 Y103.125 E.14047
G1 X104.825 Y103.125 E.05416
G1 X104.825 Y102.725 E.01354
G1 X104.868 Y102.725 E.00144
G1 X104.868 Y103.065 E.01151
M204 S1000
G1 X104.882 Y103.525 F10800
;WIPE_START
G1 F8640
G1 X106.147 Y103.125 E-.29565
G1 X106.147 Y102.725 E-.09236
G1 X106.467 Y102.725 E-.07408
G1 X106.467 Y103.125 E-.09236
G1 X107.358 Y103.125 E-.20555
;WIPE_END
G1 E-.04 F2100
G1 Z3.6 F720
G1 X104.066 Y103.837 F10800
G1 Z3.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y105.669 E.04528
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:3.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;3.4
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z3.6 F720
;AFTER_LAYER_CHANGE
;3.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y106.468 F10800
G1 Z3.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.63 Y105.366 E.0373
G1 X142.508 Y105.366 E.00411
G1 X142.508 Y104.63 E.02491
G1 X142.63 Y104.63 E.00411
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y106.528 E.01151
M204 S1000
G1 X142.223 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.223 Y105.773 E.05084
G1 X142.101 Y105.773 E.00411
G1 X142.101 Y104.223 E.05247
G1 X142.223 Y104.223 E.00411
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.283 Y107.275 E.15206
M204 S1000
G1 X142.326 Y106.889 F10800
;WIPE_START
G1 F8640
G1 X142.223 Y105.773 E-.34709
G1 X142.101 Y105.773 E-.02803
G1 X142.101 Y104.223 E-.3579
G1 X142.218 Y104.223 E-.02698
;WIPE_END
G1 E-.04 F2100
G1 Z3.8 F720
G1 X142.773 Y105.162 F10800
G1 Z3.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.164296
G1 F900
G1 X142.773 Y104.834 E.00332
;WIPE_START
G1 F8640
G1 X142.773 Y105.162 E-.07591
;WIPE_END
G1 E-.72409 F2100
G1 Z3.8 F720
G1 X146.063 Y103.708 F10800
G1 Z3.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.528 E.00651
G1 X143.16 Y104.528 E.00762
G1 X143.16 Y105.468 E.0318
G1 X142.935 Y105.468 E.00762
G1 X142.935 Y105.664 E.00665
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z3.8 F720
G1 X105.101 Y103.532 F10800
G1 Z3.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.07664
G1 X107.366 Y104.63 E.03717
G1 X107.415 Y104.63 E.00167
G1 X107.415 Y105.366 E.02491
G1 X107.366 Y105.366 E.00167
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X105.041 Y103.532 E.04771
M204 S1000
G1 X104.701 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X105.447 Y103.125 E.02523
G1 X105.447 Y102.725 E.01354
G1 X105.581 Y102.725 E.00456
G1 X105.581 Y103.125 E.01354
G1 X107.036 Y103.125 E.04925
G1 X107.036 Y102.725 E.01354
G1 X107.103 Y102.725 E.00227
G1 X107.103 Y103.125 E.01354
G1 X107.773 Y103.125 E.02266
G1 X107.773 Y104.223 E.03717
G1 X107.822 Y104.223 E.00167
G1 X107.822 Y105.773 E.05247
G1 X107.773 Y105.773 E.00167
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X103.89 Y103.125 E.02251
G1 X103.89 Y102.725 E.01354
G1 X104.701 Y102.725 E.02747
G1 X104.701 Y103.065 E.01151
M204 S1000
G1 X104.846 Y103.498 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.935 E.02045
G1 X107.11 Y104.935 E.00167
G1 X107.11 Y105.061 E.00424
G1 X107.06 Y105.061 E.00167
G1 X107.06 Y105.669 E.02059
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:3.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;3.6
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z3.8 F720
;AFTER_LAYER_CHANGE
;3.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z3.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.27 Y105.366 E.01217
G1 X142.27 Y104.63 E.02491
G1 X142.63 Y104.63 E.01217
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.863 Y105.773 E.01217
G1 X141.863 Y104.223 E.05247
G1 X142.223 Y104.223 E.01217
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.077 Y105.444 F10800
;WIPE_START
G1 F8640
G1 X141.863 Y105.773 E-.08415
G1 X141.863 Y104.223 E-.3579
G1 X142.223 Y104.223 E-.083
G1 X142.223 Y103.205 E-.23495
;WIPE_END
G1 E-.04 F2100
G1 Z4 F720
G1 X146.063 Y106.292 F10800
G1 Z3.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y106.563 E.00917
G1 X143.834 Y106.563 E.07545
G1 X142.935 Y105.664 E.04301
G1 X142.935 Y105.596 E.00231
G1 X142.969 Y105.596 E.00114
G1 X143.288 Y105.276 E.0153
G1 X143.288 Y104.72 E.01885
G1 X142.969 Y104.4 E.0153
G1 X142.935 Y104.4 E.00114
G1 X142.935 Y104.336 E.00217
G1 X143.834 Y103.437 E.04301
G1 X146.063 Y103.437 E.07545
G1 X146.063 Y103.708 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y103.437 E-.06255
G1 X143.834 Y103.437 E-.5147
G1 X143.274 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z4 F720
G1 X104.032 Y103.532 F10800
G1 Z3.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.11283
G1 X107.366 Y104.63 E.03717
G1 X107.512 Y104.63 E.00494
G1 X107.512 Y105.366 E.02491
G1 X107.366 Y105.366 E.00494
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.972 Y103.532 E.01151
M204 S1000
G1 X103.303 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.089 Y103.125 E.02659
G1 X104.089 Y102.725 E.01354
G1 X104.646 Y102.725 E.01884
G1 X104.646 Y103.125 E.01354
G1 X105.351 Y103.125 E.02386
G1 X105.351 Y102.725 E.01354
G1 X105.68 Y102.725 E.01117
G1 X105.68 Y103.125 E.01354
G1 X106.946 Y103.125 E.04284
G1 X106.946 Y102.725 E.01354
G1 X107.194 Y102.725 E.00838
G1 X107.194 Y103.125 E.01354
G1 X107.773 Y103.125 E.0196
G1 X107.773 Y104.223 E.03717
G1 X107.919 Y104.223 E.00494
G1 X107.919 Y105.773 E.05247
G1 X107.773 Y105.773 E.00494
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.303 Y102.725 E.00265
G1 X103.303 Y103.065 E.01151
M204 S1000
G1 X103.329 Y103.524 F10800
;WIPE_START
G1 F8640
G1 X104.089 Y103.125 E-.18194
G1 X104.089 Y102.725 E-.09236
G1 X104.646 Y102.725 E-.12854
G1 X104.646 Y103.125 E-.09236
G1 X105.351 Y103.125 E-.16274
G1 X105.351 Y102.725 E-.09236
G1 X105.393 Y102.725 E-.0097
;WIPE_END
G1 E-.04 F2100
G1 Z4 F720
G1 X104.367 Y102.929 F10800
G1 Z3.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.19251
G1 F900
G1 X104.367 Y103.329 E.00498
G1 X104.066 Y103.837 F10800
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.528 E.00667
G1 X106.835 Y104.528 E.00762
G1 X106.835 Y105.468 E.0318
G1 X107.06 Y105.468 E.00762
G1 X107.06 Y105.669 E.00681
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z4 F720
G1 X107.235 Y105.162 F10800
G1 Z3.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.188974
G1 F900
G1 X107.235 Y104.834 E.00399
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:3.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;3.8
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X107.235 Y105.162 E-.07591
;WIPE_END
G1 E-.72409 F2100
G1 Z4 F720
;AFTER_LAYER_CHANGE
;3.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z3.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X142.032 Y105.366 E.02023
G1 X142.032 Y104.63 E.02491
G1 X142.63 Y104.63 E.02023
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
M73 Q11 S42
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.625 Y105.773 E.02023
G1 X141.625 Y104.223 E.05247
G1 X142.223 Y104.223 E.02023
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X141.625 Y105.773 E-.13867
G1 X141.625 Y104.223 E-.3579
G1 X142.223 Y104.223 E-.13798
G1 X142.223 Y103.68 E-.12545
;WIPE_END
G1 E-.04 F2100
G1 Z4.2 F720
G1 X142.688 Y104.752 F10800
G1 Z3.8 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.531415
G1 F900
G1 X143.064 Y105.129 E.02165
;WIPE_START
G1 F8640
G1 X142.688 Y104.752 E-.12306
;WIPE_END
G1 E-.67694 F2100
G1 Z4.2 F720
G1 X146.063 Y106.292 F10800
G1 Z3.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y106.563 E.00917
G1 X143.834 Y106.563 E.07545
G1 X142.935 Y105.664 E.04301
G1 X142.935 Y105.596 E.00231
G1 X142.969 Y105.596 E.00114
G1 X143.288 Y105.276 E.0153
G1 X143.288 Y104.72 E.01885
G1 X142.969 Y104.4 E.0153
G1 X142.935 Y104.4 E.00114
G1 X142.935 Y104.336 E.00217
G1 X143.834 Y103.437 E.04301
G1 X146.063 Y103.437 E.07545
G1 X146.063 Y103.708 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y103.437 E-.06256
G1 X143.834 Y103.437 E-.5147
G1 X143.274 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z4.2 F720
G1 X104.032 Y103.532 F10800
G1 Z3.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X104.733 Y103.532 E.02374
G1 X104.733 Y103.132 E.01354
G1 X105.268 Y103.132 E.01809
G1 X105.268 Y103.532 E.01354
G1 X107.366 Y103.532 E.071
G1 X107.366 Y104.63 E.03717
G1 X107.623 Y104.63 E.0087
G1 X107.623 Y105.366 E.02491
G1 X107.366 Y105.366 E.0087
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.972 Y103.532 E.01151
M204 S1000
M73 P12 R42
G1 X103.519 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.326 Y103.125 E.02732
G1 X104.326 Y102.725 E.01354
G1 X105.675 Y102.725 E.04565
G1 X105.675 Y103.125 E.01354
G1 X106.905 Y103.125 E.04164
G1 X106.905 Y102.725 E.01354
G1 X107.234 Y102.725 E.01112
G1 X107.234 Y103.125 E.01354
G1 X107.773 Y103.125 E.01824
G1 X107.773 Y104.223 E.03717
G1 X108.03 Y104.223 E.0087
G1 X108.03 Y105.773 E.05247
G1 X107.773 Y105.773 E.0087
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.519 Y102.725 E.00995
G1 X103.519 Y103.065 E.01151
M204 S1000
G1 X103.603 Y103.516 F10800
;WIPE_START
G1 F8640
G1 X104.326 Y103.125 E-.18691
G1 X104.326 Y102.725 E-.09236
G1 X105.675 Y102.725 E-.31142
G1 X105.675 Y103.125 E-.09236
G1 X106.008 Y103.125 E-.07695
;WIPE_END
G1 E-.04 F2100
G1 Z4.2 F720
G1 X104.474 Y103.837 F10800
G1 Z3.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X104.61 Y103.837 E.00462
G1 X104.61 Y104.041 E.00689
G1 X105.391 Y104.041 E.02644
G1 X105.391 Y103.837 E.00689
G1 X106.566 Y103.837 E.03978
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z4.2 F720
G1 X105.001 Y103.736 F10800
G1 Z3.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.17039
G1 F900
G1 X105.001 Y103.336 E.00424
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;4
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X105.001 Y103.736 E-.09236
;WIPE_END
G1 E-.70764 F2100
G1 Z4.2 F720
;AFTER_LAYER_CHANGE
;4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
M73 Q12 S42
G1 X142.63 Y105.373 F10800
G1 Z4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X141.794 Y105.366 E.02829
G1 X141.794 Y104.63 E.02491
G1 X142.63 Y104.63 E.02829
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.387 Y105.773 E.02829
G1 X141.387 Y104.223 E.05247
G1 X142.223 Y104.223 E.02829
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
G1 X141.998 Y104.998
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X142.833 Y104.998 E.02284
;WIPE_START
G1 F8640
G1 X141.998 Y104.998 E-.19295
;WIPE_END
G1 E-.60705 F2100
G1 Z4.4 F720
G1 X146.063 Y103.708 F10800
G1 Z4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z4.4 F720
G1 X104.154 Y103.532 F10800
G1 Z4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X104.947 Y103.532 E.02685
G1 X104.947 Y103.132 E.01354
G1 X105.123 Y103.132 E.00595
G1 X105.123 Y103.532 E.01354
G1 X107.366 Y103.532 E.07591
G1 X107.366 Y104.63 E.03717
G1 X107.742 Y104.63 E.01274
G1 X107.742 Y105.366 E.02491
G1 X107.366 Y105.366 E.01274
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.094 Y103.532 E.01564
M204 S1000
G1 X103.754 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.54 Y103.125 E.02661
G1 X104.54 Y102.725 E.01354
G1 X105.53 Y102.725 E.0335
G1 X105.53 Y103.125 E.01354
G1 X106.896 Y103.125 E.04622
G1 X106.896 Y102.725 E.01354
G1 X107.245 Y102.725 E.01181
G1 X107.245 Y103.125 E.01354
G1 X107.773 Y103.125 E.01787
G1 X107.773 Y104.223 E.03717
G1 X108.149 Y104.223 E.01274
G1 X108.149 Y105.773 E.05247
G1 X107.773 Y105.773 E.01274
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
M73 P12 R41
G1 X103.754 Y102.725 E.01791
G1 X103.754 Y103.065 E.01151
M204 S1000
G1 X103.875 Y103.506 F10800
G1 X103.49 Y102.929
;TYPE:Gap fill
;WIDTH:0.165052
G1 F900
G1 X103.49 Y103.329 E.00406
G1 X104.066 Y103.837 F10800
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:4.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;4.2
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z4.4 F720
;AFTER_LAYER_CHANGE
;4.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z4.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X141.556 Y105.366 E.03635
G1 X141.556 Y104.63 E.02491
G1 X142.63 Y104.63 E.03634
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.149 Y105.773 E.03634
G1 X141.149 Y104.223 E.05247
G1 X142.223 Y104.223 E.03634
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
G1 X141.76 Y104.998
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X142.833 Y104.998 E.02935
;WIPE_START
G1 F8640
G1 X141.76 Y104.998 E-.24792
;WIPE_END
G1 E-.55208 F2100
G1 Z4.6 F720
G1 X146.063 Y103.708 F10800
G1 Z4.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z4.6 F720
G1 X104.351 Y103.532 F10800
G1 Z4.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.10205
G1 X107.366 Y104.63 E.03717
G1 X107.87 Y104.63 E.01708
G1 X107.87 Y105.366 E.02491
G1 X107.366 Y105.366 E.01708
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.291 Y103.532 E.02229
M204 S1000
G1 X103.951 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.709 Y103.125 E.02566
G1 X104.709 Y102.725 E.01354
G1 X105.144 Y102.725 E.01473
G1 X105.144 Y103.125 E.01354
G1 X106.061 Y103.125 E.03103
G1 X106.061 Y102.725 E.01354
G1 X106.194 Y102.725 E.00453
G1 X106.194 Y103.125 E.01354
G1 X106.896 Y103.125 E.02375
G1 X106.896 Y102.725 E.01354
G1 X107.245 Y102.725 E.0118
G1 X107.245 Y103.125 E.01354
G1 X107.773 Y103.125 E.01787
G1 X107.773 Y104.223 E.03717
G1 X108.277 Y104.223 E.01708
G1 X108.277 Y105.773 E.05247
G1 X107.773 Y105.773 E.01708
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.951 Y102.725 E.02456
G1 X103.951 Y103.065 E.01151
M204 S1000
G1 X104.09 Y103.5 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:4.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;4.4
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z4.6 F720
;AFTER_LAYER_CHANGE
;4.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z4.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X141.318 Y105.366 E.0444
G1 X141.318 Y104.63 E.02491
G1 X142.63 Y104.63 E.0444
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.911 Y105.773 E.0444
G1 X140.911 Y104.223 E.05247
G1 X142.223 Y104.223 E.0444
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.911 Y105.773 E-.30322
G1 X140.911 Y104.223 E-.3579
G1 X141.339 Y104.223 E-.09888
;WIPE_END
G1 E-.04 F2100
G1 Z4.8 F720
G1 X142.833 Y104.998 F10800
G1 Z4.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X141.521 Y104.998 E.03586
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.3029
;WIPE_END
G1 E-.4971 F2100
G1 Z4.8 F720
G1 X146.063 Y103.708 F10800
G1 Z4.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z4.8 F720
G1 X104.487 Y103.532 F10800
G1 Z4.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.09744
G1 X107.366 Y104.63 E.03717
G1 X108.011 Y104.63 E.02186
G1 X108.011 Y105.366 E.02491
G1 X107.366 Y105.366 E.02186
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X103.68 Y103.132 E.00161
G1 X103.68 Y103.532 E.01354
G1 X104.427 Y103.532 E.02529
M204 S1000
G1 X104.087 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.802 Y103.125 E.02421
G1 X104.802 Y102.725 E.01354
G1 X105.535 Y102.725 E.02482
G1 X105.535 Y103.125 E.01354
G1 X106.91 Y103.125 E.04653
G1 X106.91 Y102.725 E.01354
G1 X107.231 Y102.725 E.01088
G1 X107.231 Y103.125 E.01354
G1 X107.773 Y103.125 E.01833
G1 X107.773 Y104.223 E.03717
G1 X108.418 Y104.223 E.02186
G1 X108.418 Y105.773 E.05247
G1 X107.773 Y105.773 E.02186
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X104.087 Y102.725 E.02917
G1 X104.087 Y103.065 E.01151
M204 S1000
G1 X104.235 Y103.497 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X106.728 Y104.72 E.01559
G1 X106.728 Y105.276 E.01885
G1 X107.06 Y105.596 E.01559
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
M73 P13 R41
G1 Z4.8 F720
G1 X107.385 Y104.752 F10800
G1 Z4.4 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.531415
G1 F900
G1 X106.953 Y105.184 E.02482
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:4.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;4.6
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X107.385 Y104.752 E-.14111
;WIPE_END
G1 E-.65889 F2100
G1 Z4.8 F720
;AFTER_LAYER_CHANGE
;4.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z4.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X141.08 Y105.366 E.05246
G1 X141.08 Y104.63 E.02491
G1 X142.63 Y104.63 E.05246
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.673 Y105.773 E.05246
G1 X140.673 Y104.223 E.05247
G1 X142.223 Y104.223 E.05246
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
M73 Q13 S42
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.673 Y105.773 E-.35814
G1 X140.673 Y104.223 E-.3579
G1 X140.863 Y104.223 E-.04396
;WIPE_END
G1 E-.04 F2100
G1 Z5 F720
G1 X142.833 Y104.998 F10800
G1 Z4.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X141.283 Y104.998 E.04237
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.35787
;WIPE_END
G1 E-.44213 F2100
G1 Z5 F720
G1 X146.063 Y103.708 F10800
G1 Z4.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z5 F720
G1 X104.516 Y103.532 F10800
G1 Z4.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.09646
G1 X107.366 Y104.63 E.03717
G1 X108.167 Y104.63 E.02713
G1 X108.167 Y105.366 E.02491
G1 X107.366 Y105.366 E.02713
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.456 Y103.532 E.02788
M204 S1000
G1 X104.116 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X105.371 Y103.125 E.04249
G1 X105.371 Y102.725 E.01354
G1 X105.598 Y102.725 E.00769
G1 X105.598 Y103.125 E.01354
G1 X106.957 Y103.125 E.04599
G1 X106.957 Y102.725 E.01354
G1 X107.184 Y102.725 E.0077
G1 X107.184 Y103.125 E.01354
G1 X107.773 Y103.125 E.01991
G1 X107.773 Y104.223 E.03717
G1 X108.574 Y104.223 E.02713
G1 X108.574 Y105.773 E.05247
G1 X107.773 Y105.773 E.02713
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X103.812 Y103.125 E.01987
G1 X103.812 Y102.725 E.01354
G1 X104.116 Y102.725 E.01028
G1 X104.116 Y103.065 E.01151
M204 S1000
G1 X104.202 Y103.516 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z5 F720
G1 X107.162 Y104.998 F10800
G1 Z4.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X107.964 Y104.998 E.02191
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:4.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;4.8
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.18507
;WIPE_END
G1 E-.61493 F2100
G1 Z5 F720
;AFTER_LAYER_CHANGE
;4.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z4.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X140.842 Y105.366 E.06052
G1 X140.842 Y104.63 E.02491
G1 X142.63 Y104.63 E.06052
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.435 Y105.773 E.06052
G1 X140.435 Y104.223 E.05247
G1 X142.223 Y104.223 E.06052
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.435 Y105.773 E-.41308
G1 X140.435 Y104.271 E-.34692
;WIPE_END
G1 E-.04 F2100
G1 Z5.2 F720
G1 X142.833 Y104.998 F10800
G1 Z4.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X141.045 Y104.998 E.04888
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.41285
;WIPE_END
G1 E-.38715 F2100
G1 Z5.2 F720
G1 X146.063 Y103.708 F10800
G1 Z4.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z5.2 F720
G1 X104.42 Y103.532 F10800
G1 Z4.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.09971
G1 X107.366 Y104.63 E.03717
G1 X108.335 Y104.63 E.03283
G1 X108.335 Y105.366 E.02491
G1 X107.366 Y105.366 E.03283
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.36 Y103.532 E.02464
M204 S1000
G1 X104.02 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X105.471 Y103.125 E.0491
G1 X105.471 Y102.725 E.01354
G1 X105.52 Y102.725 E.00168
G1 X105.52 Y103.125 E.01354
G1 X106.251 Y103.125 E.02474
G1 X106.251 Y102.725 E.01354
G1 X106.33 Y102.725 E.00268
G1 X106.33 Y103.125 E.01354
G1 X107.059 Y103.125 E.02466
G1 X107.059 Y102.725 E.01354
G1 X107.078 Y102.725 E.00064
G1 X107.078 Y103.125 E.01354
G1 X107.773 Y103.125 E.02352
G1 X107.773 Y104.223 E.03717
G1 X108.742 Y104.223 E.03283
G1 X108.742 Y105.773 E.05247
G1 X107.773 Y105.773 E.03283
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X103.913 Y103.125 E.0233
G1 X103.913 Y102.725 E.01354
G1 X104.02 Y102.725 E.0036
G1 X104.02 Y103.065 E.01151
M204 S1000
G1 X104.055 Y103.523 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z5.2 F720
G1 X107.162 Y104.998 F10800
G1 Z4.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.132 Y104.998 E.02651
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:5
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;5
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.22393
;WIPE_END
G1 E-.57607 F2100
G1 Z5.2 F720
;AFTER_LAYER_CHANGE
;5
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z5 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X140.604 Y105.366 E.06858
G1 X140.604 Y104.63 E.02491
G1 X142.63 Y104.63 E.06858
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.197 Y105.773 E.06858
G1 X140.197 Y104.223 E.05247
G1 X142.223 Y104.223 E.06858
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.197 Y105.773 E-.46803
G1 X140.197 Y104.509 E-.29197
;WIPE_END
G1 E-.04 F2100
G1 Z5.4 F720
G1 X142.833 Y104.998 F10800
G1 Z5 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.807 Y104.998 E.05539
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.46782
;WIPE_END
G1 E-.33218 F2100
G1 Z5.4 F720
G1 X146.063 Y103.708 F10800
G1 Z5 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z5.4 F720
G1 X104.032 Y103.532 F10800
G1 Z5 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.11283
G1 X107.366 Y104.63 E.03717
M73 Q13 S41
G1 X108.518 Y104.63 E.03902
G1 X108.518 Y105.366 E.02491
G1 X107.366 Y105.366 E.03902
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.972 Y103.532 E.01151
M204 S1000
G1 X103.358 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.579 Y103.125 E.04134
G1 X104.579 Y102.725 E.01354
G1 X104.913 Y102.725 E.0113
G1 X104.913 Y103.125 E.01354
G1 X106.076 Y103.125 E.03936
G1 X106.076 Y102.725 E.01354
G1 X106.499 Y102.725 E.01431
G1 X106.499 Y103.125 E.01354
G1 X107.64 Y103.125 E.03863
G1 X107.64 Y102.725 E.01354
G1 X107.773 Y102.725 E.00449
G1 X107.773 Y104.223 E.05071
G1 X108.925 Y104.223 E.03902
G1 X108.925 Y105.773 E.05247
G1 X107.773 Y105.773 E.03902
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.358 Y102.725 E.0045
G1 X103.358 Y103.065 E.01151
M204 S1000
G1 X103.401 Y103.523 F10800
;WIPE_START
G1 F8640
G1 X104.579 Y103.125 E-.28234
G1 X104.579 Y102.725 E-.09236
G1 X104.913 Y102.725 E-.0771
G1 X104.913 Y103.125 E-.09236
G1 X105.848 Y103.125 E-.21584
;WIPE_END
G1 E-.04 F2100
G1 Z5.4 F720
G1 X104.066 Y103.837 F10800
G1 Z5 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
M73 P14 R41
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z5.4 F720
G1 X107.162 Y104.998 F10800
G1 Z5 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.315 Y104.998 E.03151
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:5.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;5.2
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.26615
;WIPE_END
G1 E-.53385 F2100
G1 Z5.4 F720
;AFTER_LAYER_CHANGE
;5.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z5.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X108.721 Y104.63 E.01855
G1 X108.721 Y105.366 E.02491
G1 X107.366 Y105.366 E.04587
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.128 Y104.223 E.04587
G1 X109.128 Y105.773 E.05247
G1 X107.773 Y105.773 E.04587
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
M73 Q14 S41
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.128 Y104.223 E-.3132
G1 X109.128 Y105.773 E-.3579
G1 X108.743 Y105.773 E-.0889
;WIPE_END
G1 E-.04 F2100
G1 Z5.6 F720
G1 X107.162 Y104.998 F10800
G1 Z5.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.517 Y104.998 E.03704
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.31289
;WIPE_END
G1 E-.48711 F2100
G1 Z5.6 F720
G1 X103.937 Y103.708 F10800
G1 Z5.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z5.6 F720
G1 X142.63 Y105.373 F10800
G1 Z5.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X140.366 Y105.366 E.07664
G1 X140.366 Y104.63 E.02491
G1 X142.63 Y104.63 E.07664
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.958 Y105.773 E.07664
G1 X139.958 Y104.223 E.05247
G1 X142.223 Y104.223 E.07664
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.958 Y105.773 E-.52298
G1 X139.958 Y104.747 E-.23702
;WIPE_END
G1 E-.04 F2100
G1 Z5.6 F720
G1 X142.833 Y104.998 F10800
G1 Z5.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.569 Y104.998 E.0619
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.5228
;WIPE_END
G1 E-.2772 F2100
G1 Z5.6 F720
G1 X146.063 Y103.708 F10800
G1 Z5.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:5.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;5.4
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z5.6 F720
;AFTER_LAYER_CHANGE
;5.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z5.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X108.944 Y104.63 E.0261
G1 X108.944 Y105.366 E.02491
G1 X107.366 Y105.366 E.05342
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.351 Y104.223 E.05342
G1 X109.351 Y105.773 E.05247
G1 X107.773 Y105.773 E.05342
G1 X107.773 Y107.275 E.05084
M73 P14 R40
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.351 Y104.223 E-.36469
G1 X109.351 Y105.773 E-.3579
G1 X109.189 Y105.773 E-.03741
;WIPE_END
G1 E-.04 F2100
G1 Z5.8 F720
G1 X107.162 Y104.998 F10800
G1 Z5.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.74 Y104.998 E.04315
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.36443
;WIPE_END
G1 E-.43557 F2100
G1 Z5.8 F720
G1 X103.937 Y103.708 F10800
G1 Z5.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z5.8 F720
G1 X142.63 Y105.373 F10800
G1 Z5.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X140.127 Y105.366 E.0847
G1 X140.127 Y104.63 E.02491
G1 X142.63 Y104.63 E.0847
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.72 Y105.773 E.0847
G1 X139.72 Y104.223 E.05247
G1 X142.223 Y104.223 E.0847
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.72 Y105.773 E-.57794
G1 X139.72 Y104.985 E-.18206
;WIPE_END
G1 E-.04 F2100
G1 Z5.8 F720
G1 X142.833 Y104.998 F10800
G1 Z5.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.331 Y104.998 E.0684
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.57777
;WIPE_END
G1 E-.22223 F2100
G1 Z5.8 F720
G1 X146.063 Y103.708 F10800
G1 Z5.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:5.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;5.6
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z5.8 F720
;AFTER_LAYER_CHANGE
;5.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z5.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.192 Y104.63 E.03451
G1 X109.192 Y105.366 E.02491
G1 X107.366 Y105.366 E.06183
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.599 Y104.223 E.06183
G1 X109.599 Y105.773 E.05247
G1 X107.773 Y105.773 E.06183
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.599 Y104.223 E-.42202
G1 X109.599 Y105.687 E-.33798
;WIPE_END
G1 E-.04 F2100
G1 Z6 F720
G1 X107.162 Y104.998 F10800
G1 Z5.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.989 Y104.998 E.04994
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.42179
;WIPE_END
G1 E-.37821 F2100
G1 Z6 F720
G1 X103.937 Y103.708 F10800
G1 Z5.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z6 F720
G1 X142.63 Y105.373 F10800
G1 Z5.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.889 Y105.366 E.09276
G1 X139.889 Y104.63 E.02491
G1 X142.63 Y104.63 E.09276
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.482 Y105.773 E.09276
G1 X139.482 Y104.223 E.05247
G1 X142.223 Y104.223 E.09276
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
M73 P15 R40
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.482 Y105.773 E-.6329
G1 X139.482 Y105.223 E-.1271
;WIPE_END
G1 E-.04 F2100
G1 Z6 F720
G1 X142.833 Y104.998 F10800
G1 Z5.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.093 Y104.998 E.07491
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.63274
;WIPE_END
G1 E-.16726 F2100
G1 Z6 F720
G1 X146.063 Y103.708 F10800
G1 Z5.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:5.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;5.8
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z6 F720
;AFTER_LAYER_CHANGE
;5.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z5.8 F720
M73 Q15 S41
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.469 Y104.63 E.04389
G1 X109.469 Y105.366 E.02491
G1 X107.366 Y105.366 E.07121
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.876 Y104.223 E.07121
G1 X109.876 Y105.773 E.05247
G1 X107.773 Y105.773 E.07121
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.876 Y104.223 E-.48596
G1 X109.876 Y105.41 E-.27404
;WIPE_END
G1 E-.04 F2100
G1 Z6.2 F720
G1 X107.162 Y104.998 F10800
G1 Z5.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.266 Y104.998 E.05751
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.48576
;WIPE_END
G1 E-.31424 F2100
G1 Z6.2 F720
G1 X103.937 Y103.708 F10800
G1 Z5.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z6.2 F720
G1 X142.63 Y105.373 F10800
G1 Z5.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.651 Y105.366 E.10082
G1 X139.651 Y104.63 E.02491
G1 X142.63 Y104.63 E.10082
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.244 Y105.773 E.10082
G1 X139.244 Y104.223 E.05247
G1 X142.223 Y104.223 E.10082
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.244 Y105.773 E-.68786
G1 X139.244 Y105.461 E-.07214
;WIPE_END
G1 E-.04 F2100
G1 Z6.2 F720
G1 X142.833 Y104.998 F10800
G1 Z5.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.855 Y104.998 E.08142
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.68772
;WIPE_END
G1 E-.11228 F2100
G1 Z6.2 F720
G1 X146.063 Y103.708 F10800
G1 Z5.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;6
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z6.2 F720
;AFTER_LAYER_CHANGE
;6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.788 Y104.63 E.05468
G1 X109.788 Y105.366 E.02491
G1 X107.366 Y105.366 E.082
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X110.195 Y104.223 E.082
G1 X110.195 Y105.773 E.05247
G1 X107.773 Y105.773 E.082
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X110.195 Y104.223 E-.55953
G1 X110.195 Y105.091 E-.20047
;WIPE_END
G1 E-.04 F2100
G1 Z6.4 F720
G1 X107.162 Y104.998 F10800
G1 Z6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.584 Y104.998 E.06622
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.55935
;WIPE_END
G1 E-.24065 F2100
G1 Z6.4 F720
G1 X103.937 Y103.708 F10800
G1 Z6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z6.4 F720
G1 X142.63 Y105.373 F10800
G1 Z6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.413 Y105.366 E.10887
G1 X139.413 Y104.63 E.02491
G1 X142.63 Y104.63 E.10887
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.006 Y105.773 E.10887
G1 X139.006 Y104.223 E.05247
G1 X142.223 Y104.223 E.10887
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.006 Y105.773 E-.74282
G1 X139.006 Y105.699 E-.01718
;WIPE_END
G1 E-.04 F2100
G1 Z6.4 F720
G1 X142.833 Y104.998 F10800
G1 Z6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.617 Y104.998 E.08793
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.74269
;WIPE_END
G1 E-.05731 F2100
G1 Z6.4 F720
G1 X146.063 Y103.708 F10800
G1 Z6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:6.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;6.2
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z6.4 F720
;AFTER_LAYER_CHANGE
;6.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z6.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X110.16 Y104.63 E.06728
G1 X110.16 Y105.366 E.02491
G1 X107.366 Y105.366 E.09459
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X110.567 Y104.223 E.09459
G1 X110.567 Y105.773 E.05247
G1 X107.773 Y105.773 E.09459
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
M73 Q15 S40
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X110.567 Y104.223 E-.64543
G1 X110.567 Y104.719 E-.11457
;WIPE_END
G1 E-.04 F2100
G1 Z6.6 F720
G1 X107.162 Y104.998 F10800
G1 Z6.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.957 Y104.998 E.0764
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.64528
;WIPE_END
G1 E-.15472 F2100
G1 Z6.6 F720
G1 X103.937 Y103.708 F10800
G1 Z6.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
M73 P16 R40
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z6.6 F720
G1 X142.63 Y105.373 F10800
G1 Z6.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.175 Y105.366 E.11693
G1 X139.175 Y104.63 E.02491
G1 X142.63 Y104.63 E.11693
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X138.768 Y105.773 E.11693
G1 X138.768 Y104.223 E.05247
M73 Q16 S40
G1 X142.223 Y104.223 E.11693
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X138.932 Y105.776 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z6.6 F720
G1 X142.833 Y104.998 F10800
G1 Z6.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.379 Y104.998 E.09444
;WIPE_START
G1 F8640
G1 X142.67 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z6.6 F720
G1 X146.063 Y103.708 F10800
G1 Z6.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:6.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;6.4
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z6.6 F720
;AFTER_LAYER_CHANGE
;6.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.373 Y105.366 F10800
G1 Z6.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F945
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X110.992 Y104.63 E.12276
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X138.343 Y104.63 E.8795
;TYPE:Perimeter
;WIDTH:0.45
G1 F945
G1 X142.63 Y104.63 E.1451
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.366 E.05084
G1 X138.343 Y105.366 E.1451
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X110.992 Y105.366 E.8795
;TYPE:Perimeter
;WIDTH:0.45
G1 F945
G1 X107.433 Y105.366 E.12049
M204 S1000
G1 X107.773 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F945
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.223 E.05071
G1 X110.992 Y104.223 E.10898
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X138.343 Y104.223 E.8795
;TYPE:External perimeter
;WIDTH:0.45
G1 F945
G1 X142.223 Y104.223 E.13132
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
M73 P16 R39
G1 X142.223 Y105.773 E.05084
G1 X138.343 Y105.773 E.13132
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X110.992 Y105.773 E.8795
;TYPE:External perimeter
;WIDTH:0.45
G1 F945
G1 X107.833 Y105.773 E.10695
M204 S1000
;WIPE_START
G1 F8640
G1 X107.773 Y107.275 E-.34709
G1 X105.984 Y107.275 E-.41291
;WIPE_END
G1 E-.04 F2100
G1 Z6.8 F720
G1 X107.162 Y104.998 F10800
G1 Z6.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F945
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z6.8 F720
G1 X146.063 Y103.708 F10800
G1 Z6.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F945
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z6.8 F720
G1 X103.937 Y106.292 F10800
G1 Z6.4 F720
G1 E.8 F2100
G1 F945
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:6.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;6.6
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z6.8 F720
;AFTER_LAYER_CHANGE
;6.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z6.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F1087
G1 X142.63 Y104.63 E1.16633
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.366 E.05084
G1 X107.366 Y105.366 E1.19365
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F1087
G1 X142.223 Y104.223 E1.16609
G1 X142.223 Y102.725 E.05071
M73 P17 R39
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X107.773 Y105.773 E1.16609
G1 X107.773 Y107.275 E.05084
M73 Q17 S40
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X111.064 Y104.169 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z7 F720
G1 X107.162 Y104.998 F10800
G1 Z6.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F1087
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z7 F720
G1 X146.063 Y103.708 F10800
G1 Z6.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F1087
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z7 F720
G1 X103.937 Y106.292 F10800
G1 Z6.6 F720
G1 E.8 F2100
G1 F1087
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:6.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;6.8
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z7 F720
;AFTER_LAYER_CHANGE
;6.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z6.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F1087
G1 X142.63 Y104.63 E1.16633
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.366 E.05084
G1 X107.366 Y105.366 E1.19365
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F1087
G1 X142.223 Y104.223 E1.16609
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X107.773 Y105.773 E1.16609
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X111.064 Y104.169 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z7.2 F720
G1 X107.162 Y104.998 F10800
G1 Z6.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F1087
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z7.2 F720
G1 X146.063 Y103.708 F10800
G1 Z6.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F1087
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z7.2 F720
G1 X103.937 Y106.292 F10800
G1 Z6.8 F720
G1 E.8 F2100
G1 F1087
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:7
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;7
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z7.2 F720
;AFTER_LAYER_CHANGE
;7
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z7 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
M73 P18 R39
M73 Q17 S39
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z7.4 F720
G1 X104.135 Y103.906 F10800
G1 Z7 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X104.135 Y103.635 E.00916
G1 X106.364 Y103.635 E.07546
G1 X106.863 Y104.134 E.02385
G1 X106.863 Y105.866 E.05866
G1 X106.368 Y106.361 E.02366
G1 X104.135 Y106.361 E.0756
G1 X104.135 Y106.094 E.00902
;WIPE_START
G1 F8640
G1 X104.135 Y106.361 E-.06155
G1 X106.368 Y106.361 E-.51571
G1 X106.863 Y105.866 E-.16137
G1 X106.863 Y105.774 E-.02138
;WIPE_END
G1 E-.04 F2100
G1 Z7.4 F720
G1 X142.832 Y106.266 F10800
G1 Z7 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.832 Y103.33 E.09937
G1 X146.166 Y103.33 E.11283
G1 X146.166 Y106.666 E.11291
G1 X142.832 Y106.666 E.11283
G1 X142.832 Y106.326 E.01151
M204 S1000
G1 X142.425 Y107.073 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.485 Y107.073 E.13836
M204 S1000
M73 Q18 S39
G1 X142.529 Y106.687 F10800
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z7.4 F720
G1 X145.86 Y106.089 F10800
G1 Z7 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X145.86 Y106.361 E.00918
G1 X143.632 Y106.361 E.07544
G1 X143.137 Y105.866 E.02365
G1 X143.137 Y104.134 E.05866
G1 X143.636 Y103.635 E.02385
G1 X145.86 Y103.635 E.0753
G1 X145.86 Y103.911 E.00932
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:7.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;7.2
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X145.86 Y103.635 E-.06356
G1 X143.636 Y103.635 E-.51369
G1 X143.137 Y104.134 E-.16267
G1 X143.137 Y104.22 E-.02007
;WIPE_END
G1 E-.04 F2100
G1 Z7.4 F720
;AFTER_LAYER_CHANGE
;7.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z7.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z7.6 F720
G1 X104.135 Y103.906 F10800
G1 Z7.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X104.135 Y103.635 E.00916
G1 X106.364 Y103.635 E.07546
G1 X106.863 Y104.134 E.02385
G1 X106.863 Y105.866 E.05866
G1 X106.368 Y106.361 E.02366
G1 X104.135 Y106.361 E.0756
G1 X104.135 Y106.094 E.00902
;WIPE_START
G1 F8640
G1 X104.135 Y106.361 E-.06155
G1 X106.368 Y106.361 E-.51571
G1 X106.863 Y105.866 E-.16137
G1 X106.863 Y105.774 E-.02138
;WIPE_END
G1 E-.04 F2100
G1 Z7.6 F720
G1 X142.832 Y106.266 F10800
G1 Z7.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.832 Y103.33 E.09937
G1 X146.166 Y103.33 E.11283
G1 X146.166 Y106.666 E.11291
G1 X142.832 Y106.666 E.11283
G1 X142.832 Y106.326 E.01151
M204 S1000
G1 X142.425 Y107.073 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.485 Y107.073 E.13836
M204 S1000
G1 X142.529 Y106.687 F10800
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z7.6 F720
G1 X145.86 Y106.089 F10800
G1 Z7.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X145.86 Y106.361 E.00918
G1 X143.632 Y106.361 E.07544
G1 X143.137 Y105.866 E.02365
G1 X143.137 Y104.134 E.05866
G1 X143.636 Y103.635 E.02385
G1 X145.86 Y103.635 E.0753
G1 X145.86 Y103.911 E.00932
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:7.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;7.4
 M104 S230 M109 S230 








;WIPE_START
G1 F8640
G1 X145.86 Y103.635 E-.06356
G1 X143.636 Y103.635 E-.51369
G1 X143.137 Y104.134 E-.16267
G1 X143.137 Y104.22 E-.02007
;WIPE_END
G1 E-.04 F2100
G1 Z7.6 F720
;AFTER_LAYER_CHANGE
;7.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z7.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z7.8 F720
G1 X104.135 Y103.906 F10800
G1 Z7.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X104.135 Y103.635 E.00916
G1 X106.364 Y103.635 E.07546
G1 X106.863 Y104.134 E.02385
G1 X106.863 Y105.866 E.05866
G1 X106.368 Y106.361 E.02366
G1 X104.135 Y106.361 E.0756
G1 X104.135 Y106.094 E.00902
;WIPE_START
G1 F8640
G1 X104.135 Y106.361 E-.06155
G1 X106.368 Y106.361 E-.51571
G1 X106.863 Y105.866 E-.16137
G1 X106.863 Y105.774 E-.02138
;WIPE_END
G1 E-.04 F2100
G1 Z7.8 F720
G1 X142.832 Y106.266 F10800
G1 Z7.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.832 Y103.33 E.09937
G1 X146.166 Y103.33 E.11283
G1 X146.166 Y106.666 E.11291
G1 X142.832 Y106.666 E.11283
G1 X142.832 Y106.326 E.01151
M204 S1000
M73 P18 R38
G1 X142.425 Y107.073 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.485 Y107.073 E.13836
M204 S1000
G1 X142.529 Y106.687 F10800
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z7.8 F720
G1 X145.86 Y106.089 F10800
G1 Z7.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X145.86 Y106.361 E.00918
G1 X143.632 Y106.361 E.07544
G1 X143.137 Y105.866 E.02365
G1 X143.137 Y104.134 E.05866
G1 X143.636 Y103.635 E.02385
G1 X145.86 Y103.635 E.0753
G1 X145.86 Y103.911 E.00932
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:7.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;7.6

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X145.86 Y103.635 E-.06356
G1 X143.636 Y103.635 E-.51369
G1 X143.137 Y104.134 E-.16267
G1 X143.137 Y104.22 E-.02007
;WIPE_END
G1 E-.04 F2100
G1 Z7.8 F720
;AFTER_LAYER_CHANGE
;7.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z7.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z8 F720
G1 X146.063 Y103.708 F10800
G1 Z7.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z8 F720
G1 X106.966 Y106.868 F10800
G1 Z7.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z8 F720
G1 X103.937 Y106.292 F10800
G1 Z7.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:7.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;7.8

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z8 F720
;AFTER_LAYER_CHANGE
;7.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z7.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
M73 P19 R38
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z8.2 F720
G1 X146.063 Y103.708 F10800
G1 Z7.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z8.2 F720
G1 X106.966 Y106.868 F10800
G1 Z7.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
M73 Q19 S39
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z8.2 F720
G1 X103.937 Y106.292 F10800
G1 Z7.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;8

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z8.2 F720
;AFTER_LAYER_CHANGE
;8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z8.4 F720
G1 X146.063 Y103.708 F10800
G1 Z8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z8.4 F720
G1 X106.966 Y106.868 F10800
G1 Z8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z8.4 F720
G1 X103.937 Y106.292 F10800
G1 Z8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:8.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;8.2

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z8.4 F720
;AFTER_LAYER_CHANGE
;8.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z8.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z8.6 F720
G1 X146.063 Y103.708 F10800
G1 Z8.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z8.6 F720
G1 X106.966 Y106.868 F10800
G1 Z8.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z8.6 F720
G1 X103.937 Y106.292 F10800
G1 Z8.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:8.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;8.4

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z8.6 F720
;AFTER_LAYER_CHANGE
;8.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z8.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z8.8 F720
G1 X146.063 Y103.708 F10800
G1 Z8.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z8.8 F720
G1 X106.966 Y106.868 F10800
G1 Z8.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
M73 P20 R38
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z8.8 F720
G1 X103.937 Y106.292 F10800
G1 Z8.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
M73 Q19 S38
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:8.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;8.6

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z8.8 F720
;AFTER_LAYER_CHANGE
;8.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z8.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
M73 Q20 S38
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z9 F720
G1 X146.063 Y103.708 F10800
G1 Z8.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z9 F720
G1 X106.966 Y106.868 F10800
G1 Z8.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z9 F720
G1 X103.937 Y106.292 F10800
G1 Z8.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:8.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;8.8

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z9 F720
;AFTER_LAYER_CHANGE
;8.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z8.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z9.2 F720
G1 X146.063 Y103.708 F10800
G1 Z8.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z9.2 F720
G1 X106.966 Y106.868 F10800
G1 Z8.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z9.2 F720
G1 X103.937 Y106.292 F10800
G1 Z8.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:9
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;9

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z9.2 F720
;AFTER_LAYER_CHANGE
;9
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z9 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
M73 P20 R37
G1 Z9.4 F720
G1 X146.063 Y103.708 F10800
G1 Z9 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z9.4 F720
G1 X106.966 Y106.868 F10800
G1 Z9 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z9.4 F720
G1 X103.937 Y106.292 F10800
G1 Z9 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.794 Y104.065 E.01273
G1 X106.33 Y104.078 E.01572
G1 X105.828 Y103.576 E.02403
G1 X105.885 Y103.437 E.00506
G1 X104.714 Y103.437 E.03964
;WIPE_START
G1 F8640
G1 X105.885 Y103.437 E-.27039
G1 X105.828 Y103.576 E-.03453
G1 X106.33 Y104.078 E-.16394
G1 X106.794 Y104.065 E-.10725
G1 X107.06 Y104.331 E-.08686
G1 X107.06 Y104.751 E-.09703
;WIPE_END
G1 E-.04 F2100
G1 Z9.4 F720
G1 X106.597 Y103.254 F10800
G1 Z9 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.531415
G1 F900
G1 X106.943 Y103.6 E.01987
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:9.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;9.2

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X106.597 Y103.254 E-.11293
;WIPE_END
G1 E-.68707 F2100
G1 Z9.4 F720
;AFTER_LAYER_CHANGE
;9.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z9.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z9.6 F720
G1 X146.063 Y103.708 F10800
G1 Z9.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
M73 P21 R37
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z9.6 F720
G1 X106.966 Y106.868 F10800
G1 Z9.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
M73 Q21 S38
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z9.6 F720
G1 X103.937 Y106.292 F10800
G1 Z9.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.794 Y104.065 E.01273
G1 X106.33 Y104.078 E.01572
G1 X105.828 Y103.576 E.02403
G1 X105.885 Y103.437 E.00506
G1 X104.714 Y103.437 E.03964
;WIPE_START
G1 F8640
G1 X105.885 Y103.437 E-.27039
G1 X105.828 Y103.576 E-.03453
G1 X106.33 Y104.078 E-.16394
G1 X106.794 Y104.065 E-.10725
G1 X107.06 Y104.331 E-.08686
G1 X107.06 Y104.751 E-.09703
;WIPE_END
G1 E-.04 F2100
G1 Z9.6 F720
G1 X106.927 Y103.299 F10800
G1 Z9.2 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.531415
G1 F900
G1 X106.398 Y103.829 E.03041
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:9.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;9.4

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X106.927 Y103.299 E-.1729
;WIPE_END
G1 E-.6271 F2100
G1 Z9.6 F720
;AFTER_LAYER_CHANGE
;9.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z9.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z9.8 F720
G1 X146.063 Y103.708 F10800
G1 Z9.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z9.8 F720
G1 X106.806 Y103.532 F10800
G1 Z9.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.01894
G1 X107.366 Y106.868 E.11291
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X106.746 Y103.532 E.1054
M204 S1000
G1 X106.406 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.684 Y103.125 E.04325
G1 X107.684 Y102.725 E.01354
G1 X107.773 Y102.725 E.00301
G1 X107.773 Y107.275 E.15401
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X106.369 Y103.125 E.10641
G1 X106.369 Y102.725 E.01354
G1 X106.406 Y102.725 E.00126
G1 X106.406 Y103.065 E.01151
M204 S1000
G1 X106.418 Y103.525 F10800
;WIPE_START
G1 F8640
G1 X107.684 Y103.125 E-.29537
G1 X107.684 Y102.725 E-.09236
G1 X107.773 Y102.725 E-.02051
G1 X107.773 Y104.248 E-.35176
;WIPE_END
G1 E-.04 F2100
G1 Z9.8 F720
G1 X104.066 Y103.837 F10800
G1 Z9.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y105.669 E.04528
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:9.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;9.6

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z9.8 F720
;AFTER_LAYER_CHANGE
;9.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y106.468 F10800
G1 Z9.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.63 Y105.366 E.0373
G1 X142.511 Y105.366 E.00403
G1 X142.511 Y104.63 E.02491
G1 X142.63 Y104.63 E.00403
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y106.528 E.01151
M204 S1000
G1 X142.223 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.223 Y105.773 E.05084
G1 X142.104 Y105.773 E.00403
G1 X142.104 Y104.223 E.05247
G1 X142.223 Y104.223 E.00403
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.283 Y107.275 E.15206
M204 S1000
G1 X142.326 Y106.889 F10800
;WIPE_START
G1 F8640
G1 X142.223 Y105.773 E-.34709
G1 X142.104 Y105.773 E-.02751
G1 X142.104 Y104.223 E-.3579
G1 X142.223 Y104.223 E-.0275
;WIPE_END
G1 E-.04 F2100
G1 Z10 F720
G1 X142.774 Y105.162 F10800
G1 Z9.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.162036
G1 F900
G1 X142.774 Y104.834 E.00326
;WIPE_START
G1 F8640
G1 X142.774 Y105.162 E-.07591
;WIPE_END
G1 E-.72409 F2100
G1 Z10 F720
G1 X146.063 Y103.708 F10800
G1 Z9.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.528 E.00651
G1 X143.16 Y104.528 E.00762
G1 X143.16 Y105.468 E.0318
G1 X142.935 Y105.468 E.00762
G1 X142.935 Y105.664 E.00665
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z10 F720
G1 X105.089 Y103.532 F10800
G1 Z9.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.07705
G1 X107.366 Y104.63 E.03717
G1 X107.414 Y104.63 E.00165
G1 X107.414 Y105.366 E.02491
G1 X107.366 Y105.366 E.00165
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X105.029 Y103.532 E.04729
M204 S1000
G1 X104.689 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X105.434 Y103.125 E.0252
G1 X105.434 Y102.725 E.01354
G1 X106.241 Y102.725 E.02731
G1 X106.241 Y103.125 E.01354
G1 X106.992 Y103.125 E.02543
G1 X106.992 Y102.725 E.01354
G1 X107.125 Y102.725 E.0045
G1 X107.125 Y103.125 E.01354
G1 X107.773 Y103.125 E.02192
G1 X107.773 Y104.223 E.03717
G1 X107.821 Y104.223 E.00165
G1 X107.821 Y105.773 E.05247
G1 X107.773 Y105.773 E.00165
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X103.878 Y103.125 E.02211
G1 X103.878 Y102.725 E.01354
G1 X104.689 Y102.725 E.02745
G1 X104.689 Y103.065 E.01151
M204 S1000
G1 X104.834 Y103.498 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.935 E.02045
G1 X107.109 Y104.935 E.00165
G1 X107.109 Y105.061 E.00424
G1 X107.06 Y105.061 E.00165
G1 X107.06 Y105.669 E.02059
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:9.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;9.8

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z10 F720
;AFTER_LAYER_CHANGE
;9.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z9.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.272 Y105.366 E.0121
G1 X142.272 Y104.63 E.02491
G1 X142.63 Y104.63 E.0121
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.865 Y105.773 E.0121
G1 X141.865 Y104.223 E.05247
G1 X142.223 Y104.223 E.0121
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.078 Y105.446 F10800
;WIPE_START
G1 F8640
G1 X141.865 Y105.773 E-.08367
G1 X141.865 Y104.223 E-.3579
G1 X142.223 Y104.223 E-.08252
G1 X142.223 Y103.201 E-.23591
;WIPE_END
G1 E-.04 F2100
G1 Z10.2 F720
G1 X146.063 Y106.292 F10800
G1 Z9.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y106.563 E.00917
G1 X143.834 Y106.563 E.07545
G1 X142.935 Y105.664 E.04301
G1 X142.935 Y105.596 E.00231
G1 X142.969 Y105.596 E.00114
G1 X143.288 Y105.276 E.0153
G1 X143.288 Y104.72 E.01885
G1 X142.969 Y104.4 E.0153
G1 X142.935 Y104.4 E.00114
G1 X142.935 Y104.336 E.00217
G1 X143.834 Y103.437 E.04301
G1 X146.063 Y103.437 E.07545
G1 X146.063 Y103.708 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y103.437 E-.06256
G1 X143.834 Y103.437 E-.5147
G1 X143.274 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z10.2 F720
G1 X104.032 Y103.532 F10800
G1 Z9.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.11283
G1 X107.366 Y104.63 E.03717
G1 X107.512 Y104.63 E.00494
G1 X107.512 Y105.366 E.02491
G1 X107.366 Y105.366 E.00494
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.972 Y103.532 E.01151
M204 S1000
G1 X103.294 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.079 Y103.125 E.0266
G1 X104.079 Y102.725 E.01354
G1 X104.848 Y102.725 E.026
G1 X104.848 Y103.125 E.01354
G1 X105.633 Y103.125 E.0266
G1 X105.633 Y102.725 E.01354
G1 X106.187 Y102.725 E.01875
G1 X106.187 Y103.125 E.01354
G1 X106.899 Y103.125 E.0241
G1 X106.899 Y102.725 E.01354
G1 X107.229 Y102.725 E.01118
G1 X107.229 Y103.125 E.01354
G1 X107.773 Y103.125 E.01839
G1 X107.773 Y104.223 E.03717
G1 X107.919 Y104.223 E.00494
G1 X107.919 Y105.773 E.05247
G1 X107.773 Y105.773 E.00494
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.294 Y102.725 E.00232
G1 X103.294 Y103.065 E.01151
M204 S1000
G1 X103.316 Y103.524 F10800
;WIPE_START
G1 F8640
G1 X104.079 Y103.125 E-.18196
G1 X104.079 Y102.725 E-.09236
G1 X104.848 Y102.725 E-.17738
G1 X104.848 Y103.125 E-.09236
G1 X105.633 Y103.125 E-.18143
G1 X105.633 Y102.976 E-.03451
;WIPE_END
G1 E-.04 F2100
G1 Z10.2 F720
G1 X104.066 Y103.837 F10800
M73 P22 R37
G1 Z9.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.528 E.00667
G1 X106.835 Y104.528 E.00762
G1 X106.835 Y105.468 E.0318
G1 X107.06 Y105.468 E.00762
G1 X107.06 Y105.669 E.00681
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z10.2 F720
G1 X107.235 Y105.162 F10800
G1 Z9.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.188972
G1 F900
G1 X107.235 Y104.834 E.00399
;WIPE_START
G1 F8640
G1 X107.235 Y105.162 E-.07591
;WIPE_END
G1 E-.72409 F2100
G1 Z10.2 F720
G1 X105.91 Y103.329 F10800
G1 Z9.8 F720
G1 E.8 F2100
;WIDTH:0.189704
G1 F900
G1 X105.91 Y102.929 E.00488
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:10
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;10

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X105.91 Y103.329 E-.09236
;WIPE_END
G1 E-.70764 F2100
G1 Z10.2 F720
;AFTER_LAYER_CHANGE
;10
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z10 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X142.034 Y105.366 E.02016
G1 X142.034 Y104.63 E.02491
G1 X142.63 Y104.63 E.02016
M73 Q21 S37
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
M73 Q22 S37
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.627 Y105.773 E.02016
G1 X141.627 Y104.223 E.05247
G1 X142.223 Y104.223 E.02016
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X141.627 Y105.773 E-.13822
G1 X141.627 Y104.223 E-.3579
G1 X142.223 Y104.223 E-.13753
G1 X142.223 Y103.676 E-.12635
;WIPE_END
G1 E-.04 F2100
G1 Z10.4 F720
G1 X143.064 Y104.867 F10800
G1 Z10 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.531415
G1 F900
G1 X142.688 Y105.244 E.02165
;WIPE_START
G1 F8640
G1 X143.064 Y104.867 E-.12306
;WIPE_END
G1 E-.67694 F2100
G1 Z10.4 F720
G1 X146.063 Y106.292 F10800
G1 Z10 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y106.563 E.00917
G1 X143.834 Y106.563 E.07545
G1 X142.935 Y105.664 E.04301
G1 X142.935 Y105.596 E.00231
G1 X142.969 Y105.596 E.00114
G1 X143.288 Y105.276 E.0153
G1 X143.288 Y104.72 E.01885
G1 X142.969 Y104.4 E.0153
G1 X142.935 Y104.4 E.00114
G1 X142.935 Y104.336 E.00217
G1 X143.834 Y103.437 E.04301
G1 X146.063 Y103.437 E.07545
G1 X146.063 Y103.708 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y103.437 E-.06256
G1 X143.834 Y103.437 E-.5147
G1 X143.274 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z10.4 F720
G1 X104.032 Y103.532 F10800
G1 Z10 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X106.275 Y103.532 E.07592
G1 X106.275 Y103.132 E.01354
G1 X106.837 Y103.132 E.01901
G1 X106.837 Y103.532 E.01354
G1 X107.366 Y103.532 E.0179
G1 X107.366 Y104.63 E.03717
G1 X107.623 Y104.63 E.0087
G1 X107.623 Y105.366 E.02491
G1 X107.366 Y105.366 E.0087
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.972 Y103.532 E.01151
M204 S1000
G1 X103.508 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.314 Y103.125 E.02728
G1 X104.314 Y102.725 E.01354
G1 X105.062 Y102.725 E.02532
G1 X105.062 Y103.125 E.01354
G1 X105.868 Y103.125 E.02728
G1 X105.868 Y102.725 E.01354
G1 X107.244 Y102.725 E.04657
G1 X107.244 Y103.125 E.01354
G1 X107.773 Y103.125 E.0179
G1 X107.773 Y104.223 E.03717
G1 X108.03 Y104.223 E.0087
G1 X108.03 Y105.773 E.05247
G1 X107.773 Y105.773 E.0087
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.508 Y102.725 E.00958
G1 X103.508 Y103.065 E.01151
M204 S1000
G1 X103.59 Y103.517 F10800
;WIPE_START
G1 F8640
G1 X104.314 Y103.125 E-.18661
G1 X104.314 Y102.725 E-.09236
G1 X105.062 Y102.725 E-.17272
G1 X105.062 Y103.125 E-.09236
G1 X105.868 Y103.125 E-.1861
G1 X105.868 Y102.996 E-.02986
;WIPE_END
G1 E-.04 F2100
G1 Z10.4 F720
G1 X104.474 Y103.837 F10800
G1 Z10 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X106.152 Y103.837 E.05681
G1 X106.152 Y104.041 E.00689
G1 X106.77 Y104.041 E.02092
G1 X107.06 Y104.331 E.01389
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z10.4 F720
G1 X106.556 Y103.736 F10800
G1 Z10 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.197402
G1 F900
G1 X106.556 Y103.336 E.00514
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:10.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;10.2

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X106.556 Y103.736 E-.09236
;WIPE_END
G1 E-.70764 F2100
G1 Z10.4 F720
;AFTER_LAYER_CHANGE
;10.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z10.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X141.796 Y105.366 E.02823
G1 X141.796 Y104.63 E.02491
G1 X142.63 Y104.63 E.02822
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.389 Y105.773 E.02822
G1 X141.389 Y104.223 E.05247
G1 X142.223 Y104.223 E.02822
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
G1 X141.999 Y104.998
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X142.833 Y104.998 E.02279
;WIPE_START
G1 F8640
G1 X141.999 Y104.998 E-.19254
;WIPE_END
G1 E-.60746 F2100
G1 Z10.6 F720
G1 X146.063 Y103.708 F10800
G1 Z10.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z10.6 F720
G1 X104.144 Y103.532 F10800
G1 Z10.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X106.49 Y103.532 E.07938
G1 X106.49 Y103.132 E.01354
G1 X106.781 Y103.132 E.00986
G1 X106.781 Y103.532 E.01354
G1 X107.366 Y103.532 E.0198
G1 X107.366 Y104.63 E.03717
G1 X107.742 Y104.63 E.01274
G1 X107.742 Y105.366 E.02491
G1 X107.366 Y105.366 E.01274
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.084 Y103.532 E.01531
M204 S1000
G1 X103.744 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.529 Y103.125 E.02655
G1 X104.529 Y102.725 E.01354
G1 X105.299 Y102.725 E.02605
G1 X105.299 Y103.125 E.01354
G1 X106.082 Y103.125 E.02653
G1 X106.082 Y102.725 E.01354
G1 X107.188 Y102.725 E.03741
G1 X107.188 Y103.125 E.01354
G1 X107.773 Y103.125 E.0198
G1 X107.773 Y104.223 E.03717
G1 X108.149 Y104.223 E.01274
G1 X108.149 Y105.773 E.05247
G1 X107.773 Y105.773 E.01274
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.744 Y102.725 E.01758
G1 X103.744 Y103.065 E.01151
M204 S1000
G1 X103.865 Y103.507 F10800
G1 X103.485 Y102.929
;TYPE:Gap fill
;WIDTH:0.155328
G1 F900
G1 X103.485 Y103.329 E.00374
G1 X104.066 Y103.837 F10800
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:10.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;10.4

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z10.6 F720
;AFTER_LAYER_CHANGE
;10.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z10.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X141.558 Y105.366 E.03629
G1 X141.558 Y104.63 E.02491
G1 X142.63 Y104.63 E.03629
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.151 Y105.773 E.03629
G1 X141.151 Y104.223 E.05247
G1 X142.223 Y104.223 E.03629
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
G1 X141.761 Y104.998
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X142.833 Y104.998 E.02931
;WIPE_START
G1 F8640
M73 P22 R36
G1 X141.761 Y104.998 E-.24755
;WIPE_END
G1 E-.55245 F2100
G1 Z10.8 F720
G1 X146.063 Y103.708 F10800
G1 Z10.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z10.8 F720
G1 X104.339 Y103.532 F10800
G1 Z10.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.10244
G1 X107.366 Y104.63 E.03717
G1 X107.87 Y104.63 E.01708
G1 X107.87 Y105.366 E.02491
G1 X107.366 Y105.366 E.01708
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.279 Y103.532 E.02191
M204 S1000
G1 X103.939 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.698 Y103.125 E.02568
G1 X104.698 Y102.725 E.01354
G1 X105.493 Y102.725 E.02692
G1 X105.493 Y103.125 E.01354
G1 X106.252 Y103.125 E.02568
G1 X106.252 Y102.725 E.01354
G1 X106.254 Y103.125 E.01354
G1 X107.773 Y103.125 E.05139
G1 X107.773 Y104.223 E.03717
G1 X108.277 Y104.223 E.01708
G1 X108.277 Y105.773 E.05247
G1 X107.773 Y105.773 E.01708
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.939 Y102.725 E.02418
G1 X103.939 Y103.065 E.01151
M204 S1000
G1 X104.078 Y103.5 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:10.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;10.6

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z10.8 F720
;AFTER_LAYER_CHANGE
;10.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z10.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X141.319 Y105.366 E.04435
G1 X141.319 Y104.63 E.02491
G1 X142.63 Y104.63 E.04435
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
M73 P23 R36
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.912 Y105.773 E.04435
G1 X140.912 Y104.223 E.05247
G1 X142.223 Y104.223 E.04435
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.912 Y105.773 E-.30288
G1 X140.912 Y104.223 E-.3579
G1 X141.342 Y104.223 E-.09922
;WIPE_END
G1 E-.04 F2100
G1 Z11 F720
G1 X142.833 Y104.998 F10800
G1 Z10.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X141.523 Y104.998 E.03582
;WIPE_START
G1 F8640
M73 Q23 S37
G1 X142.833 Y104.998 E-.30256
;WIPE_END
G1 E-.49744 F2100
G1 Z11 F720
G1 X146.063 Y103.708 F10800
G1 Z10.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z11 F720
G1 X104.474 Y103.532 F10800
G1 Z10.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X105.197 Y103.532 E.02448
G1 X105.197 Y103.132 E.01354
G1 X105.221 Y103.132 E.0008
G1 X105.221 Y103.532 E.01354
G1 X107.366 Y103.532 E.0726
G1 X107.366 Y104.63 E.03717
G1 X108.011 Y104.63 E.02186
G1 X108.011 Y105.366 E.02491
G1 X107.366 Y105.366 E.02186
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X103.667 Y103.132 E.00118
G1 X103.667 Y103.532 E.01354
G1 X104.414 Y103.532 E.02529
M204 S1000
G1 X104.074 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.79 Y103.125 E.02424
G1 X104.79 Y102.725 E.01354
G1 X105.628 Y102.725 E.02836
G1 X105.628 Y103.125 E.01354
G1 X107.51 Y103.125 E.06371
G1 X107.51 Y102.725 E.01354
G1 X107.773 Y102.725 E.00888
G1 X107.773 Y104.223 E.05071
G1 X108.418 Y104.223 E.02186
G1 X108.418 Y105.773 E.05247
G1 X107.773 Y105.773 E.02186
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X104.074 Y102.725 E.02874
G1 X104.074 Y103.065 E.01151
M204 S1000
G1 X104.221 Y103.497 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X106.728 Y104.72 E.01559
G1 X106.728 Y105.276 E.01885
G1 X107.06 Y105.596 E.01559
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z11 F720
G1 X106.953 Y104.812 F10800
G1 Z10.6 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.531415
G1 F900
G1 X107.385 Y105.244 E.02482
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:10.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;10.8

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X106.953 Y104.812 E-.14111
;WIPE_END
G1 E-.65889 F2100
G1 Z11 F720
;AFTER_LAYER_CHANGE
;10.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z10.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X141.081 Y105.366 E.05242
G1 X141.081 Y104.63 E.02491
G1 X142.63 Y104.63 E.05242
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.674 Y105.773 E.05242
G1 X140.674 Y104.223 E.05247
G1 X142.223 Y104.223 E.05242
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.674 Y105.773 E-.35784
G1 X140.674 Y104.223 E-.3579
G1 X140.866 Y104.223 E-.04426
;WIPE_END
G1 E-.04 F2100
G1 Z11.2 F720
G1 X142.833 Y104.998 F10800
G1 Z10.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X141.285 Y104.998 E.04233
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.35757
;WIPE_END
G1 E-.44243 F2100
G1 Z11.2 F720
G1 X146.063 Y103.708 F10800
G1 Z10.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z11.2 F720
G1 X104.504 Y103.532 F10800
G1 Z10.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.09686
G1 X107.366 Y104.63 E.03717
G1 X108.167 Y104.63 E.02713
G1 X108.167 Y105.366 E.02491
G1 X107.366 Y105.366 E.02713
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.444 Y103.532 E.02748
M204 S1000
G1 X104.104 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X105.354 Y103.125 E.04232
G1 X105.354 Y102.725 E.01354
G1 X105.658 Y102.725 E.01028
G1 X105.658 Y103.125 E.01354
G1 X107.017 Y103.125 E.04601
G1 X107.017 Y102.725 E.01354
G1 X107.773 Y102.725 E.02557
G1 X107.773 Y104.223 E.05071
G1 X108.574 Y104.223 E.02713
G1 X108.574 Y105.773 E.05247
G1 X107.773 Y105.773 E.02713
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X103.801 Y103.125 E.01951
G1 X103.801 Y102.725 E.01354
G1 X104.104 Y102.725 E.01024
G1 X104.104 Y103.065 E.01151
M204 S1000
G1 X104.19 Y103.516 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z11.2 F720
G1 X107.162 Y104.998 F10800
G1 Z10.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X107.964 Y104.998 E.02191
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:11
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;11

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.18506
;WIPE_END
G1 E-.61494 F2100
G1 Z11.2 F720
;AFTER_LAYER_CHANGE
;11
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z11 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X140.843 Y105.366 E.06048
G1 X140.843 Y104.63 E.02491
G1 X142.63 Y104.63 E.06048
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.436 Y105.773 E.06048
G1 X140.436 Y104.223 E.05247
G1 X142.223 Y104.223 E.06048
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.436 Y105.773 E-.41281
G1 X140.436 Y104.269 E-.34719
;WIPE_END
G1 E-.04 F2100
G1 Z11.4 F720
G1 X142.833 Y104.998 F10800
G1 Z11 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X141.046 Y104.998 E.04885
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.41258
;WIPE_END
G1 E-.38742 F2100
G1 Z11.4 F720
G1 X146.063 Y103.708 F10800
G1 Z11 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z11.4 F720
G1 X104.408 Y103.532 F10800
G1 Z11 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.10011
G1 X107.366 Y104.63 E.03717
G1 X108.335 Y104.63 E.03283
G1 X108.335 Y105.366 E.02491
G1 X107.366 Y105.366 E.03283
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.348 Y103.532 E.02424
M204 S1000
G1 X104.008 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X105.456 Y103.125 E.049
G1 X105.456 Y102.725 E.01354
G1 X105.562 Y102.725 E.0036
G1 X105.562 Y103.125 E.01354
G1 X106.308 Y103.125 E.02524
G1 X106.308 Y102.725 E.01354
G1 X106.367 Y102.725 E.00202
G1 X106.367 Y103.125 E.01354
G1 X107.058 Y103.125 E.02336
G1 X107.058 Y102.725 E.01354
G1 X107.773 Y102.725 E.02421
G1 X107.773 Y104.223 E.05071
G1 X108.742 Y104.223 E.03283
G1 X108.742 Y105.773 E.05247
G1 X107.773 Y105.773 E.03283
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X103.902 Y103.125 E.02291
G1 X103.902 Y102.725 E.01354
G1 X104.008 Y102.725 E.0036
G1 X104.008 Y103.065 E.01151
M204 S1000
G1 X104.043 Y103.523 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z11.4 F720
G1 X107.162 Y104.998 F10800
G1 Z11 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.132 Y104.998 E.02651
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:11.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;11.2

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.22393
;WIPE_END
G1 E-.57607 F2100
G1 Z11.4 F720
;AFTER_LAYER_CHANGE
;11.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z11.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X140.605 Y105.366 E.06855
G1 X140.605 Y104.63 E.02491
G1 X142.63 Y104.63 E.06855
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
M73 P24 R36
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.198 Y105.773 E.06855
G1 X140.198 Y104.223 E.05247
G1 X142.223 Y104.223 E.06855
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.198 Y105.773 E-.46779
G1 X140.198 Y104.508 E-.29221
;WIPE_END
G1 E-.04 F2100
G1 Z11.6 F720
G1 X142.833 Y104.998 F10800
G1 Z11.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.808 Y104.998 E.05536
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.46759
;WIPE_END
G1 E-.33241 F2100
G1 Z11.6 F720
G1 X146.063 Y103.708 F10800
G1 Z11.2 F720
M73 Q24 S37
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z11.6 F720
G1 X104.032 Y103.532 F10800
G1 Z11.2 F720
M73 Q24 S36
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.11283
G1 X107.366 Y104.63 E.03717
G1 X108.518 Y104.63 E.039
G1 X108.518 Y105.366 E.02491
G1 X107.366 Y105.366 E.039
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.972 Y103.532 E.01151
M204 S1000
G1 X103.347 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.57 Y103.125 E.0414
G1 X104.57 Y102.725 E.01354
G1 X104.901 Y102.725 E.0112
G1 X104.901 Y103.125 E.01354
G1 X106.123 Y103.125 E.04138
G1 X106.123 Y102.725 E.01354
G1 X106.405 Y102.725 E.00955
G1 X106.405 Y103.125 E.01354
G1 X107.773 Y103.125 E.04629
G1 X107.773 Y104.223 E.03717
G1 X108.925 Y104.223 E.039
G1 X108.925 Y105.773 E.05247
G1 X107.773 Y105.773 E.039
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.347 Y102.725 E.00412
G1 X103.347 Y103.065 E.01151
M204 S1000
G1 X103.386 Y103.523 F10800
;WIPE_START
G1 F8640
G1 X104.57 Y103.125 E-.28273
G1 X104.57 Y102.725 E-.09236
G1 X104.901 Y102.725 E-.07642
G1 X104.901 Y103.125 E-.09236
G1 X105.837 Y103.125 E-.21613
;WIPE_END
G1 E-.04 F2100
G1 Z11.6 F720
G1 X104.066 Y103.837 F10800
G1 Z11.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z11.6 F720
G1 X107.162 Y104.998 F10800
G1 Z11.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.314 Y104.998 E.0315
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:11.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;11.4

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.26606
;WIPE_END
G1 E-.53394 F2100
G1 Z11.6 F720
;AFTER_LAYER_CHANGE
;11.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.373 Y105.366 F10800
G1 Z11.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.719 Y104.63 E.0458
G1 X108.719 Y105.366 E.02491
G1 X107.433 Y105.366 E.04353
M204 S1000
G1 X107.773 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.223 E.05071
G1 X109.126 Y104.223 E.0458
G1 X109.126 Y105.773 E.05247
G1 X107.833 Y105.773 E.04377
M204 S1000
G1 X107.389 Y105.885 F10800
;WIPE_START
G1 F8640
G1 X107.773 Y107.275 E-.34709
G1 X105.984 Y107.275 E-.41291
;WIPE_END
G1 E-.04 F2100
G1 Z11.8 F720
G1 X107.162 Y104.998 F10800
G1 Z11.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.515 Y104.998 E.03699
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.3124
;WIPE_END
G1 E-.4876 F2100
G1 Z11.8 F720
G1 X103.937 Y103.708 F10800
G1 Z11.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z11.8 F720
G1 X142.63 Y105.373 F10800
G1 Z11.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X140.366 Y105.366 E.07661
G1 X140.366 Y104.63 E.02491
G1 X142.63 Y104.63 E.07661
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.959 Y105.773 E.07661
G1 X139.959 Y104.223 E.05247
G1 X142.223 Y104.223 E.07661
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.959 Y105.773 E-.52278
G1 X139.959 Y104.746 E-.23722
;WIPE_END
G1 E-.04 F2100
G1 Z11.8 F720
G1 X142.833 Y104.998 F10800
G1 Z11.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.57 Y104.998 E.06187
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.5226
;WIPE_END
G1 E-.2774 F2100
G1 Z11.8 F720
G1 X146.063 Y103.708 F10800
G1 Z11.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:11.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;11.6

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z11.8 F720
;AFTER_LAYER_CHANGE
;11.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z11.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X108.944 Y104.63 E.0261
G1 X108.944 Y105.366 E.02491
G1 X107.366 Y105.366 E.05342
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.351 Y104.223 E.05342
G1 X109.351 Y105.773 E.05247
G1 X107.773 Y105.773 E.05342
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.351 Y104.223 E-.36466
G1 X109.351 Y105.773 E-.3579
G1 X109.189 Y105.773 E-.03744
;WIPE_END
G1 E-.04 F2100
G1 Z12 F720
G1 X107.162 Y104.998 F10800
G1 Z11.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.74 Y104.998 E.04314
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.36439
;WIPE_END
G1 E-.43561 F2100
G1 Z12 F720
G1 X103.937 Y103.708 F10800
G1 Z11.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z12 F720
G1 X142.63 Y105.373 F10800
G1 Z11.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X140.128 Y105.366 E.08467
G1 X140.128 Y104.63 E.02491
G1 X142.63 Y104.63 E.08467
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
M73 P24 R35
G1 F900
G1 X139.721 Y105.773 E.08467
G1 X139.721 Y104.223 E.05247
G1 X142.223 Y104.223 E.08467
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.721 Y105.773 E-.57778
G1 X139.721 Y104.984 E-.18222
;WIPE_END
G1 E-.04 F2100
G1 Z12 F720
G1 X142.833 Y104.998 F10800
G1 Z11.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.332 Y104.998 E.06838
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.57761
;WIPE_END
G1 E-.22239 F2100
G1 Z12 F720
G1 X146.063 Y103.708 F10800
G1 Z11.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:11.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;11.8

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z12 F720
;AFTER_LAYER_CHANGE
;11.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z11.8 F720
M73 P25 R35
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.192 Y104.63 E.03451
G1 X109.192 Y105.366 E.02491
G1 X107.366 Y105.366 E.06183
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.599 Y104.223 E.06183
G1 X109.599 Y105.773 E.05247
G1 X107.773 Y105.773 E.06183
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
M73 Q25 S36
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.599 Y104.223 E-.42202
G1 X109.599 Y105.687 E-.33798
;WIPE_END
G1 E-.04 F2100
G1 Z12.2 F720
G1 X107.162 Y104.998 F10800
G1 Z11.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.989 Y104.998 E.04994
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.42179
;WIPE_END
G1 E-.37821 F2100
G1 Z12.2 F720
G1 X103.937 Y103.708 F10800
G1 Z11.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z12.2 F720
G1 X142.63 Y105.373 F10800
G1 Z11.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.89 Y105.366 E.09274
G1 X139.89 Y104.63 E.02491
G1 X142.63 Y104.63 E.09274
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.483 Y105.773 E.09274
G1 X139.483 Y104.223 E.05247
G1 X142.223 Y104.223 E.09274
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.483 Y105.773 E-.63277
G1 X139.483 Y105.222 E-.12723
;WIPE_END
G1 E-.04 F2100
G1 Z12.2 F720
G1 X142.833 Y104.998 F10800
G1 Z11.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.093 Y104.998 E.0749
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.63262
;WIPE_END
G1 E-.16738 F2100
G1 Z12.2 F720
G1 X146.063 Y103.708 F10800
G1 Z11.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:12
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;12

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z12.2 F720
;AFTER_LAYER_CHANGE
;12
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z12 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.472 Y104.63 E.04398
G1 X109.472 Y105.366 E.02491
G1 X107.366 Y105.366 E.0713
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.879 Y104.223 E.0713
G1 X109.879 Y105.773 E.05247
G1 X107.773 Y105.773 E.0713
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.879 Y104.223 E-.48655
G1 X109.879 Y105.407 E-.27345
;WIPE_END
G1 E-.04 F2100
G1 Z12.4 F720
G1 X107.162 Y104.998 F10800
G1 Z12 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.268 Y104.998 E.05758
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.48635
;WIPE_END
G1 E-.31365 F2100
G1 Z12.4 F720
G1 X103.937 Y103.708 F10800
G1 Z12 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z12.4 F720
G1 X142.63 Y105.373 F10800
G1 Z12 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.652 Y105.366 E.1008
G1 X139.652 Y104.63 E.02491
G1 X142.63 Y104.63 E.1008
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.245 Y105.773 E.1008
G1 X139.245 Y104.223 E.05247
G1 X142.223 Y104.223 E.1008
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.245 Y105.773 E-.68777
G1 X139.245 Y105.46 E-.07223
;WIPE_END
G1 E-.04 F2100
G1 Z12.4 F720
G1 X142.833 Y104.998 F10800
G1 Z12 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.855 Y104.998 E.08141
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.68763
;WIPE_END
G1 E-.11237 F2100
G1 Z12.4 F720
G1 X146.063 Y103.708 F10800
G1 Z12 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:12.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;12.2

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z12.4 F720
;AFTER_LAYER_CHANGE
;12.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z12.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.788 Y104.63 E.05468
G1 X109.788 Y105.366 E.02491
G1 X107.366 Y105.366 E.082
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X110.195 Y104.223 E.082
G1 X110.195 Y105.773 E.05247
G1 X107.773 Y105.773 E.082
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X110.195 Y104.223 E-.55952
G1 X110.195 Y105.091 E-.20048
;WIPE_END
G1 E-.04 F2100
G1 Z12.6 F720
G1 X107.162 Y104.998 F10800
G1 Z12.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.584 Y104.998 E.06622
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.55935
;WIPE_END
G1 E-.24065 F2100
G1 Z12.6 F720
G1 X103.937 Y103.708 F10800
G1 Z12.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z12.6 F720
G1 X142.63 Y105.373 F10800
G1 Z12.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.413 Y105.366 E.10887
G1 X139.413 Y104.63 E.02491
G1 X142.63 Y104.63 E.10887
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.006 Y105.773 E.10887
G1 X139.006 Y104.223 E.05247
G1 X142.223 Y104.223 E.10887
G1 X142.223 Y102.725 E.05071
M73 P26 R35
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.006 Y105.773 E-.74277
G1 X139.006 Y105.698 E-.01723
;WIPE_END
G1 E-.04 F2100
G1 Z12.6 F720
G1 X142.833 Y104.998 F10800
G1 Z12.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.617 Y104.998 E.08792
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.74264
;WIPE_END
G1 E-.05736 F2100
G1 Z12.6 F720
G1 X146.063 Y103.708 F10800
G1 Z12.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
M73 Q26 S36
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:12.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;12.4

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z12.6 F720
;AFTER_LAYER_CHANGE
;12.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z12.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X110.16 Y104.63 E.06728
G1 X110.16 Y105.366 E.02491
G1 X107.366 Y105.366 E.09459
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X110.567 Y104.223 E.09459
G1 X110.567 Y105.773 E.05247
M73 Q26 S35
G1 X107.773 Y105.773 E.09459
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X110.567 Y104.223 E-.64543
G1 X110.567 Y104.719 E-.11457
;WIPE_END
G1 E-.04 F2100
G1 Z12.8 F720
G1 X107.162 Y104.998 F10800
G1 Z12.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.957 Y104.998 E.0764
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.64528
;WIPE_END
G1 E-.15472 F2100
G1 Z12.8 F720
G1 X103.937 Y103.708 F10800
G1 Z12.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z12.8 F720
G1 X142.63 Y105.373 F10800
G1 Z12.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.175 Y105.366 E.11693
G1 X139.175 Y104.63 E.02491
G1 X142.63 Y104.63 E.11693
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X138.768 Y105.773 E.11693
G1 X138.768 Y104.223 E.05247
G1 X142.223 Y104.223 E.11693
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X138.932 Y105.776 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z12.8 F720
G1 X142.833 Y104.998 F10800
G1 Z12.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.379 Y104.998 E.09444
;WIPE_START
G1 F8640
G1 X142.67 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z12.8 F720
G1 X146.063 Y103.708 F10800
G1 Z12.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:12.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;12.6

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z12.8 F720
;AFTER_LAYER_CHANGE
;12.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.373 Y105.366 F10800
G1 Z12.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F945
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X110.992 Y104.63 E.12276
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X138.343 Y104.63 E.87951
;TYPE:Perimeter
;WIDTH:0.45
G1 F945
G1 X142.63 Y104.63 E.1451
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.366 E.05084
G1 X138.343 Y105.366 E.1451
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X110.992 Y105.366 E.87951
;TYPE:Perimeter
;WIDTH:0.45
G1 F945
G1 X107.433 Y105.366 E.12049
M204 S1000
G1 X107.773 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F945
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.223 E.05071
G1 X110.992 Y104.223 E.10898
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X138.343 Y104.223 E.87951
;TYPE:External perimeter
;WIDTH:0.45
G1 F945
G1 X142.223 Y104.223 E.13132
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X138.343 Y105.773 E.13132
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X110.992 Y105.773 E.87951
;TYPE:External perimeter
;WIDTH:0.45
G1 F945
G1 X107.833 Y105.773 E.10695
M204 S1000
;WIPE_START
G1 F8640
G1 X107.773 Y107.275 E-.34709
G1 X105.984 Y107.275 E-.41291
;WIPE_END
G1 E-.04 F2100
G1 Z13 F720
G1 X107.162 Y104.998 F10800
G1 Z12.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F945
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
M73 P26 R34
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z13 F720
G1 X146.063 Y103.708 F10800
G1 Z12.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F945
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
M73 P27 R34
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z13 F720
G1 X103.937 Y106.292 F10800
G1 Z12.6 F720
G1 E.8 F2100
G1 F945
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:12.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;12.8

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z13 F720
;AFTER_LAYER_CHANGE
;12.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z12.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F1087
G1 X142.63 Y104.63 E1.16633
G1 X142.63 Y103.132 E.05071
M73 Q27 S35
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.366 E.05084
G1 X107.366 Y105.366 E1.19365
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F1087
G1 X142.223 Y104.223 E1.16609
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X107.773 Y105.773 E1.16609
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X111.064 Y104.169 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z13.2 F720
G1 X107.162 Y104.998 F10800
G1 Z12.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F1087
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z13.2 F720
G1 X146.063 Y103.708 F10800
G1 Z12.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F1087
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z13.2 F720
G1 X103.937 Y106.292 F10800
G1 Z12.8 F720
G1 E.8 F2100
G1 F1087
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:13
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;13

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z13.2 F720
;AFTER_LAYER_CHANGE
;13
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z13 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F1087
G1 X142.63 Y104.63 E1.16633
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.366 E.05084
G1 X107.366 Y105.366 E1.19365
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F1087
G1 X142.223 Y104.223 E1.16609
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X107.773 Y105.773 E1.16609
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
M73 P28 R34
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X111.064 Y104.169 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z13.4 F720
G1 X107.162 Y104.998 F10800
G1 Z13 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F1087
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
M73 Q28 S35
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z13.4 F720
G1 X146.063 Y103.708 F10800
G1 Z13 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F1087
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z13.4 F720
G1 X103.937 Y106.292 F10800
G1 Z13 F720
G1 E.8 F2100
G1 F1087
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:13.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;13.2

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z13.4 F720
;AFTER_LAYER_CHANGE
;13.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z13.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
M73 Q28 S34
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z13.6 F720
G1 X104.135 Y103.906 F10800
G1 Z13.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X104.135 Y103.635 E.00916
G1 X106.364 Y103.635 E.07546
G1 X106.863 Y104.134 E.02385
G1 X106.863 Y105.866 E.05866
G1 X106.368 Y106.361 E.02366
G1 X104.135 Y106.361 E.0756
G1 X104.135 Y106.094 E.00902
;WIPE_START
G1 F8640
G1 X104.135 Y106.361 E-.06155
G1 X106.368 Y106.361 E-.51571
G1 X106.863 Y105.866 E-.16137
G1 X106.863 Y105.774 E-.02138
;WIPE_END
G1 E-.04 F2100
G1 Z13.6 F720
G1 X142.832 Y106.266 F10800
G1 Z13.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.832 Y103.33 E.09937
G1 X146.166 Y103.33 E.11283
G1 X146.166 Y106.666 E.11291
G1 X142.832 Y106.666 E.11283
G1 X142.832 Y106.326 E.01151
M204 S1000
G1 X142.425 Y107.073 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.485 Y107.073 E.13836
M204 S1000
G1 X142.529 Y106.687 F10800
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z13.6 F720
G1 X145.86 Y106.089 F10800
G1 Z13.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X145.86 Y106.361 E.00918
G1 X143.632 Y106.361 E.07544
G1 X143.137 Y105.866 E.02365
G1 X143.137 Y104.134 E.05866
G1 X143.636 Y103.635 E.02385
G1 X145.86 Y103.635 E.0753
G1 X145.86 Y103.911 E.00932
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:13.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;13.4

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X145.86 Y103.635 E-.06356
G1 X143.636 Y103.635 E-.51369
G1 X143.137 Y104.134 E-.16267
G1 X143.137 Y104.22 E-.02007
;WIPE_END
G1 E-.04 F2100
G1 Z13.6 F720
;AFTER_LAYER_CHANGE
;13.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z13.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z13.8 F720
G1 X104.135 Y103.906 F10800
G1 Z13.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X104.135 Y103.635 E.00916
G1 X106.364 Y103.635 E.07546
G1 X106.863 Y104.134 E.02385
G1 X106.863 Y105.866 E.05866
G1 X106.368 Y106.361 E.02366
G1 X104.135 Y106.361 E.0756
G1 X104.135 Y106.094 E.00902
;WIPE_START
G1 F8640
G1 X104.135 Y106.361 E-.06155
G1 X106.368 Y106.361 E-.51571
G1 X106.863 Y105.866 E-.16137
G1 X106.863 Y105.774 E-.02138
;WIPE_END
G1 E-.04 F2100
G1 Z13.8 F720
G1 X142.832 Y106.266 F10800
G1 Z13.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.832 Y103.33 E.09937
G1 X146.166 Y103.33 E.11283
G1 X146.166 Y106.666 E.11291
G1 X142.832 Y106.666 E.11283
G1 X142.832 Y106.326 E.01151
M204 S1000
G1 X142.425 Y107.073 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.485 Y107.073 E.13836
M204 S1000
G1 X142.529 Y106.687 F10800
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z13.8 F720
G1 X145.86 Y106.089 F10800
G1 Z13.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X145.86 Y106.361 E.00918
G1 X143.632 Y106.361 E.07544
G1 X143.137 Y105.866 E.02365
G1 X143.137 Y104.134 E.05866
G1 X143.636 Y103.635 E.02385
G1 X145.86 Y103.635 E.0753
G1 X145.86 Y103.911 E.00932
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:13.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;13.6

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X145.86 Y103.635 E-.06356
G1 X143.636 Y103.635 E-.51369
G1 X143.137 Y104.134 E-.16267
G1 X143.137 Y104.22 E-.02007
;WIPE_END
G1 E-.04 F2100
G1 Z13.8 F720
;AFTER_LAYER_CHANGE
;13.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z13.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z14 F720
G1 X104.135 Y103.906 F10800
G1 Z13.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X104.135 Y103.635 E.00916
G1 X106.364 Y103.635 E.07546
G1 X106.863 Y104.134 E.02385
G1 X106.863 Y105.866 E.05866
G1 X106.368 Y106.361 E.02366
G1 X104.135 Y106.361 E.0756
G1 X104.135 Y106.094 E.00902
;WIPE_START
G1 F8640
G1 X104.135 Y106.361 E-.06155
G1 X106.368 Y106.361 E-.51571
G1 X106.863 Y105.866 E-.16137
G1 X106.863 Y105.774 E-.02138
;WIPE_END
G1 E-.04 F2100
G1 Z14 F720
G1 X142.832 Y106.266 F10800
G1 Z13.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.832 Y103.33 E.09937
G1 X146.166 Y103.33 E.11283
G1 X146.166 Y106.666 E.11291
G1 X142.832 Y106.666 E.11283
G1 X142.832 Y106.326 E.01151
M204 S1000
G1 X142.425 Y107.073 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.485 Y107.073 E.13836
M204 S1000
G1 X142.529 Y106.687 F10800
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z14 F720
G1 X145.86 Y106.089 F10800
G1 Z13.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X145.86 Y106.361 E.00918
G1 X143.632 Y106.361 E.07544
G1 X143.137 Y105.866 E.02365
G1 X143.137 Y104.134 E.05866
G1 X143.636 Y103.635 E.02385
G1 X145.86 Y103.635 E.0753
G1 X145.86 Y103.911 E.00932
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:13.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;13.8

 M104 S225 M109 S225 







;WIPE_START
G1 F8640
G1 X145.86 Y103.635 E-.06356
G1 X143.636 Y103.635 E-.51369
G1 X143.137 Y104.134 E-.16267
G1 X143.137 Y104.22 E-.02007
;WIPE_END
G1 E-.04 F2100
G1 Z14 F720
;AFTER_LAYER_CHANGE
;13.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z13.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
M73 P29 R34
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
M73 P29 R33
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z14.2 F720
G1 X146.063 Y103.708 F10800
G1 Z13.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z14.2 F720
G1 X106.966 Y106.868 F10800
G1 Z13.8 F720
M73 Q29 S34
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z14.2 F720
G1 X103.937 Y106.292 F10800
G1 Z13.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:14
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;14


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z14.2 F720
;AFTER_LAYER_CHANGE
;14
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z14 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z14.4 F720
G1 X146.063 Y103.708 F10800
G1 Z14 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z14.4 F720
G1 X106.966 Y106.868 F10800
G1 Z14 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z14.4 F720
G1 X103.937 Y106.292 F10800
G1 Z14 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:14.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;14.2


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z14.4 F720
;AFTER_LAYER_CHANGE
;14.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z14.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z14.6 F720
G1 X146.063 Y103.708 F10800
G1 Z14.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z14.6 F720
G1 X106.966 Y106.868 F10800
G1 Z14.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z14.6 F720
G1 X103.937 Y106.292 F10800
G1 Z14.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:14.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;14.4


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z14.6 F720
;AFTER_LAYER_CHANGE
;14.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z14.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z14.8 F720
G1 X146.063 Y103.708 F10800
G1 Z14.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z14.8 F720
G1 X106.966 Y106.868 F10800
G1 Z14.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
M73 P30 R33
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z14.8 F720
G1 X103.937 Y106.292 F10800
G1 Z14.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:14.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;14.6


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z14.8 F720
;AFTER_LAYER_CHANGE
;14.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z14.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
M73 Q30 S34
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z15 F720
G1 X146.063 Y103.708 F10800
G1 Z14.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z15 F720
G1 X106.966 Y106.868 F10800
G1 Z14.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z15 F720
G1 X103.937 Y106.292 F10800
G1 Z14.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
M73 Q30 S33
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:14.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;14.8


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z15 F720
;AFTER_LAYER_CHANGE
;14.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z14.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z15.2 F720
G1 X146.063 Y103.708 F10800
G1 Z14.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z15.2 F720
G1 X106.966 Y106.868 F10800
G1 Z14.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z15.2 F720
G1 X103.937 Y106.292 F10800
G1 Z14.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:15
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;15


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z15.2 F720
;AFTER_LAYER_CHANGE
;15
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z15 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z15.4 F720
G1 X146.063 Y103.708 F10800
G1 Z15 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z15.4 F720
G1 X106.966 Y106.868 F10800
G1 Z15 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z15.4 F720
G1 X103.937 Y106.292 F10800
G1 Z15 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:15.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;15.2


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z15.4 F720
;AFTER_LAYER_CHANGE
;15.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z15.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z15.6 F720
G1 X146.063 Y103.708 F10800
G1 Z15.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
M73 P31 R33
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z15.6 F720
G1 X106.966 Y106.868 F10800
G1 Z15.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
M73 Q31 S33
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z15.6 F720
G1 X103.937 Y106.292 F10800
G1 Z15.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:15.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;15.4


 M104 S220 M109 S220 






;WIPE_START
M73 P31 R32
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z15.6 F720
;AFTER_LAYER_CHANGE
;15.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z15.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z15.8 F720
G1 X146.063 Y103.708 F10800
G1 Z15.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z15.8 F720
G1 X106.966 Y106.868 F10800
G1 Z15.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z15.8 F720
G1 X103.937 Y106.292 F10800
G1 Z15.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:15.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;15.6


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z15.8 F720
;AFTER_LAYER_CHANGE
;15.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z15.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z16 F720
G1 X146.063 Y103.708 F10800
G1 Z15.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z16 F720
G1 X106.868 Y103.532 F10800
G1 Z15.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.01686
G1 X107.366 Y106.868 E.11291
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X106.808 Y103.532 E.10748
M204 S1000
G1 X106.468 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.676 Y103.125 E.04091
G1 X107.676 Y102.725 E.01354
G1 X107.773 Y102.725 E.00327
G1 X107.773 Y107.275 E.15401
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X106.379 Y103.125 E.10676
G1 X106.379 Y102.725 E.01354
G1 X106.468 Y102.725 E.003
G1 X106.468 Y103.065 E.01151
M204 S1000
G1 X106.497 Y103.524 F10800
;WIPE_START
G1 F8640
G1 X107.676 Y103.125 E-.27939
G1 X107.676 Y102.725 E-.09236
G1 X107.773 Y102.725 E-.02231
G1 X107.773 Y104.31 E-.36594
;WIPE_END
G1 E-.04 F2100
G1 Z16 F720
G1 X104.066 Y103.837 F10800
G1 Z15.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y105.669 E.04528
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:15.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;15.8


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z16 F720
;AFTER_LAYER_CHANGE
;15.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y106.468 F10800
G1 Z15.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.63 Y105.366 E.0373
G1 X142.511 Y105.366 E.00403
G1 X142.511 Y104.63 E.02491
G1 X142.63 Y104.63 E.00403
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y106.528 E.01151
M204 S1000
G1 X142.223 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.223 Y105.773 E.05084
G1 X142.103 Y105.773 E.00403
G1 X142.103 Y104.223 E.05247
G1 X142.223 Y104.223 E.00403
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.283 Y107.275 E.15206
M204 S1000
G1 X142.326 Y106.889 F10800
;WIPE_START
G1 F8640
G1 X142.223 Y105.773 E-.34709
G1 X142.103 Y105.773 E-.02752
G1 X142.103 Y104.223 E-.3579
G1 X142.222 Y104.223 E-.02748
;WIPE_END
G1 E-.04 F2100
G1 Z16.2 F720
G1 X142.774 Y105.162 F10800
G1 Z15.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.16211
G1 F900
G1 X142.774 Y104.834 E.00326
;WIPE_START
G1 F8640
G1 X142.774 Y105.162 E-.07591
;WIPE_END
G1 E-.72409 F2100
G1 Z16.2 F720
G1 X146.063 Y103.708 F10800
G1 Z15.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.528 E.00651
G1 X143.16 Y104.528 E.00762
G1 X143.16 Y105.468 E.0318
G1 X142.935 Y105.468 E.00762
G1 X142.935 Y105.664 E.00665
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z16.2 F720
G1 X105.1 Y103.532 F10800
G1 Z15.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X105.851 Y103.532 E.02543
G1 X105.851 Y103.132 E.01354
G1 X105.918 Y103.132 E.00226
G1 X105.918 Y103.532 E.01354
G1 X107.366 Y103.532 E.04901
G1 X107.366 Y104.63 E.03717
G1 X107.414 Y104.63 E.00165
G1 X107.414 Y105.366 E.02491
G1 X107.366 Y105.366 E.00165
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X105.04 Y103.532 E.04764
M204 S1000
G1 X104.7 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X105.444 Y103.125 E.02519
G1 X105.444 Y102.725 E.01354
G1 X106.325 Y102.725 E.02981
G1 X106.325 Y103.125 E.01354
G1 X107.036 Y103.125 E.02409
G1 X107.036 Y102.725 E.01354
G1 X107.103 Y102.725 E.00227
G1 X107.103 Y103.125 E.01354
G1 X107.773 Y103.125 E.02266
G1 X107.773 Y104.223 E.03717
G1 X107.821 Y104.223 E.00165
G1 X107.821 Y105.773 E.05247
G1 X107.773 Y105.773 E.00165
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X103.89 Y103.125 E.02251
G1 X103.89 Y102.725 E.01354
G1 X104.7 Y102.725 E.02741
G1 X104.7 Y103.065 E.01151
M204 S1000
G1 X104.845 Y103.498 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.935 E.02045
G1 X107.109 Y104.935 E.00165
G1 X107.109 Y105.061 E.00424
G1 X107.06 Y105.061 E.00165
G1 X107.06 Y105.669 E.02059
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:16
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;16


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z16.2 F720
;AFTER_LAYER_CHANGE
;16
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z16 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
M73 P32 R32
G1 F900
G1 X142.272 Y105.366 E.01211
G1 X142.272 Y104.63 E.02491
G1 X142.63 Y104.63 E.0121
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.865 Y105.773 E.0121
G1 X141.865 Y104.223 E.05247
G1 X142.223 Y104.223 E.0121
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.078 Y105.446 F10800
;WIPE_START
M73 Q32 S33
G1 F8640
G1 X141.865 Y105.773 E-.08372
G1 X141.865 Y104.223 E-.3579
G1 X142.223 Y104.223 E-.08257
G1 X142.223 Y103.202 E-.23581
;WIPE_END
G1 E-.04 F2100
G1 Z16.4 F720
G1 X146.063 Y106.292 F10800
G1 Z16 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y106.563 E.00917
G1 X143.834 Y106.563 E.07545
G1 X142.935 Y105.664 E.04301
G1 X142.935 Y105.596 E.00231
G1 X142.969 Y105.596 E.00114
G1 X143.288 Y105.276 E.0153
G1 X143.288 Y104.72 E.01885
G1 X142.969 Y104.4 E.0153
G1 X142.935 Y104.4 E.00114
G1 X142.935 Y104.336 E.00217
G1 X143.834 Y103.437 E.04301
G1 X146.063 Y103.437 E.07545
G1 X146.063 Y103.708 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y103.437 E-.06255
G1 X143.834 Y103.437 E-.5147
G1 X143.274 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z16.4 F720
G1 X104.032 Y103.532 F10800
G1 Z16 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.11283
G1 X107.366 Y104.63 E.03717
G1 X107.512 Y104.63 E.00494
G1 X107.512 Y105.366 E.02491
G1 X107.366 Y105.366 E.00494
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.972 Y103.532 E.01151
M204 S1000
G1 X103.303 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.091 Y103.125 E.02667
G1 X104.091 Y102.725 E.01354
G1 X104.857 Y102.725 E.02593
G1 X104.857 Y103.125 E.01354
G1 X105.645 Y103.125 E.02667
G1 X105.645 Y102.725 E.01354
G1 X106.244 Y102.725 E.02025
G1 X106.244 Y103.125 E.01354
G1 X106.946 Y103.125 E.02377
G1 X106.946 Y102.725 E.01354
G1 X107.194 Y102.725 E.00838
G1 X107.194 Y103.125 E.01354
G1 X107.773 Y103.125 E.0196
G1 X107.773 Y104.223 E.03717
G1 X107.919 Y104.223 E.00494
G1 X107.919 Y105.773 E.05247
G1 X107.773 Y105.773 E.00494
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.303 Y102.725 E.00265
G1 X103.303 Y103.065 E.01151
M204 S1000
G1 X103.329 Y103.524 F10800
;WIPE_START
G1 F8640
G1 X104.091 Y103.125 E-.18247
G1 X104.091 Y102.725 E-.09236
G1 X104.857 Y102.725 E-.17686
G1 X104.857 Y103.125 E-.09236
G1 X105.645 Y103.125 E-.18195
G1 X105.645 Y102.978 E-.034
;WIPE_END
G1 E-.04 F2100
G1 Z16.4 F720
G1 X104.066 Y103.837 F10800
G1 Z16 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.528 E.00667
G1 X106.835 Y104.528 E.00762
G1 X106.835 Y105.468 E.0318
G1 X107.06 Y105.468 E.00762
G1 X107.06 Y105.669 E.00681
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z16.4 F720
G1 X107.235 Y105.162 F10800
G1 Z16 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.18897
G1 F900
G1 X107.235 Y104.834 E.00399
;WIPE_START
G1 F8640
G1 X107.235 Y105.162 E-.07591
;WIPE_END
G1 E-.72409 F2100
G1 Z16.4 F720
G1 X105.945 Y103.329 F10800
G1 Z16 F720
G1 E.8 F2100
;WIDTH:0.234206
G1 F900
G1 X105.945 Y102.929 E.00636
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:16.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;16.2


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X105.945 Y103.329 E-.09236
;WIPE_END
G1 E-.70764 F2100
G1 Z16.4 F720
;AFTER_LAYER_CHANGE
;16.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z16.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X142.034 Y105.366 E.02018
G1 X142.034 Y104.63 E.02491
G1 X142.63 Y104.63 E.02017
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
M73 Q32 S32
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.627 Y105.773 E.02017
G1 X141.627 Y104.223 E.05247
G1 X142.223 Y104.223 E.02017
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X141.627 Y105.773 E-.13831
G1 X141.627 Y104.223 E-.3579
G1 X142.223 Y104.223 E-.13762
G1 X142.223 Y103.677 E-.12617
;WIPE_END
G1 E-.04 F2100
G1 Z16.6 F720
G1 X142.688 Y104.752 F10800
G1 Z16.2 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.531415
G1 F900
G1 X143.064 Y105.129 E.02165
;WIPE_START
G1 F8640
G1 X142.688 Y104.752 E-.12306
;WIPE_END
G1 E-.67694 F2100
G1 Z16.6 F720
G1 X146.063 Y106.292 F10800
G1 Z16.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y106.563 E.00917
G1 X143.834 Y106.563 E.07545
G1 X142.935 Y105.664 E.04301
G1 X142.935 Y105.596 E.00231
G1 X142.969 Y105.596 E.00114
G1 X143.288 Y105.276 E.0153
G1 X143.288 Y104.72 E.01885
G1 X142.969 Y104.4 E.0153
G1 X142.935 Y104.4 E.00114
G1 X142.935 Y104.336 E.00217
G1 X143.834 Y103.437 E.04301
G1 X146.063 Y103.437 E.07545
G1 X146.063 Y103.708 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y103.437 E-.06256
G1 X143.834 Y103.437 E-.5147
G1 X143.274 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z16.6 F720
G1 X104.032 Y103.532 F10800
G1 Z16.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.11283
G1 X107.366 Y104.63 E.03717
G1 X107.623 Y104.63 E.0087
G1 X107.623 Y105.366 E.02491
G1 X107.366 Y105.366 E.0087
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.972 Y103.532 E.01151
M204 S1000
G1 X103.519 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.326 Y103.125 E.02732
G1 X104.326 Y102.725 E.01354
G1 X105.073 Y102.725 E.02528
G1 X105.073 Y103.125 E.01354
G1 X105.88 Y103.125 E.02732
G1 X105.88 Y102.725 E.01354
G1 X106.206 Y102.725 E.01101
G1 X106.206 Y103.125 E.01354
G1 X106.905 Y103.125 E.02368
G1 X106.905 Y102.725 E.01354
G1 X107.234 Y102.725 E.01113
G1 X107.234 Y103.125 E.01354
G1 X107.773 Y103.125 E.01824
G1 X107.773 Y104.223 E.03717
G1 X108.03 Y104.223 E.0087
G1 X108.03 Y105.773 E.05247
G1 X107.773 Y105.773 E.0087
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.519 Y102.725 E.00996
G1 X103.519 Y103.065 E.01151
M204 S1000
G1 X103.603 Y103.516 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:16.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;16.4


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z16.6 F720
;AFTER_LAYER_CHANGE
;16.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z16.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X141.795 Y105.366 E.02824
G1 X141.795 Y104.63 E.02491
G1 X142.63 Y104.63 E.02824
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.388 Y105.773 E.02824
G1 X141.388 Y104.223 E.05247
G1 X142.223 Y104.223 E.02824
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
G1 X141.999 Y104.998
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X142.833 Y104.998 E.02281
;WIPE_START
G1 F8640
G1 X141.999 Y104.998 E-.19266
;WIPE_END
G1 E-.60734 F2100
G1 Z16.8 F720
G1 X146.063 Y103.708 F10800
G1 Z16.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z16.8 F720
G1 X104.154 Y103.532 F10800
G1 Z16.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.1087
G1 X107.366 Y104.63 E.03717
G1 X107.742 Y104.63 E.01274
G1 X107.742 Y105.366 E.02491
G1 X107.366 Y105.366 E.01274
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.094 Y103.532 E.01564
M204 S1000
G1 X103.754 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.54 Y103.125 E.02661
G1 X104.54 Y102.725 E.01354
G1 X105.308 Y102.725 E.026
G1 X105.308 Y103.125 E.01354
G1 X106.093 Y103.125 E.02655
G1 X106.093 Y102.725 E.01354
G1 X106.195 Y102.725 E.00347
G1 X106.195 Y103.125 E.01354
G1 X106.896 Y103.125 E.02371
G1 X106.896 Y102.725 E.01354
G1 X107.245 Y102.725 E.01181
G1 X107.245 Y103.125 E.01354
G1 X107.773 Y103.125 E.01787
G1 X107.773 Y104.223 E.03717
G1 X108.149 Y104.223 E.01274
G1 X108.149 Y105.773 E.05247
G1 X107.773 Y105.773 E.01274
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.754 Y102.725 E.01791
G1 X103.754 Y103.065 E.01151
M204 S1000
G1 X103.875 Y103.506 F10800
G1 X103.49 Y102.929
;TYPE:Gap fill
;WIDTH:0.165038
G1 F900
G1 X103.49 Y103.329 E.00406
G1 X104.066 Y103.837 F10800
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:16.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;16.6


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z16.8 F720
;AFTER_LAYER_CHANGE
;16.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z16.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X141.557 Y105.366 E.03631
G1 X141.557 Y104.63 E.02491
G1 X142.63 Y104.63 E.03631
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.15 Y105.773 E.03631
G1 X141.15 Y104.223 E.05247
G1 X142.223 Y104.223 E.03631
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
M73 P33 R32
G1 X141.76 Y104.998
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X142.833 Y104.998 E.02933
;WIPE_START
G1 F8640
G1 X141.76 Y104.998 E-.24771
;WIPE_END
G1 E-.55229 F2100
G1 Z17 F720
G1 X146.063 Y103.708 F10800
G1 Z16.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z17 F720
G1 X104.351 Y103.532 F10800
G1 Z16.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.10205
G1 X107.366 Y104.63 E.03717
G1 X107.87 Y104.63 E.01708
M73 Q33 S32
G1 X107.87 Y105.366 E.02491
G1 X107.366 Y105.366 E.01708
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.291 Y103.532 E.02229
M204 S1000
G1 X103.951 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.709 Y103.125 E.02566
G1 X104.709 Y102.725 E.01354
G1 X105.505 Y102.725 E.02694
G1 X105.505 Y103.125 E.01354
G1 X106.896 Y103.125 E.0471
G1 X106.896 Y102.725 E.01354
G1 X107.245 Y102.725 E.0118
G1 X107.245 Y103.125 E.01354
G1 X107.773 Y103.125 E.01787
G1 X107.773 Y104.223 E.03717
G1 X108.277 Y104.223 E.01708
G1 X108.277 Y105.773 E.05247
G1 X107.773 Y105.773 E.01708
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.951 Y102.725 E.02456
G1 X103.951 Y103.065 E.01151
M204 S1000
G1 X104.09 Y103.5 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:16.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;16.8


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z17 F720
;AFTER_LAYER_CHANGE
;16.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z16.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X141.319 Y105.366 E.04438
G1 X141.319 Y104.63 E.02491
G1 X142.63 Y104.63 E.04438
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
M73 P33 R31
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.911 Y105.773 E.04438
G1 X140.911 Y104.223 E.05247
G1 X142.223 Y104.223 E.04438
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.911 Y105.773 E-.30307
G1 X140.911 Y104.223 E-.3579
G1 X141.34 Y104.223 E-.09903
;WIPE_END
G1 E-.04 F2100
G1 Z17.2 F720
G1 X142.833 Y104.998 F10800
G1 Z16.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X141.522 Y104.998 E.03584
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.30275
;WIPE_END
G1 E-.49725 F2100
G1 Z17.2 F720
G1 X146.063 Y103.708 F10800
G1 Z16.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z17.2 F720
G1 X104.486 Y103.532 F10800
G1 Z16.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X105.209 Y103.532 E.02449
G1 X105.209 Y103.132 E.01354
G1 X105.233 Y103.132 E.00079
G1 X105.233 Y103.532 E.01354
G1 X107.366 Y103.532 E.0722
G1 X107.366 Y104.63 E.03717
G1 X108.011 Y104.63 E.02186
G1 X108.011 Y105.366 E.02491
G1 X107.366 Y105.366 E.02186
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X103.679 Y103.132 E.00158
G1 X103.679 Y103.532 E.01354
G1 X104.426 Y103.532 E.02529
M204 S1000
G1 X104.086 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.802 Y103.125 E.02425
G1 X104.802 Y102.725 E.01354
G1 X105.64 Y102.725 E.02835
G1 X105.64 Y103.125 E.01354
G1 X106.91 Y103.125 E.04299
G1 X106.91 Y102.725 E.01354
G1 X107.231 Y102.725 E.01087
G1 X107.231 Y103.125 E.01354
G1 X107.773 Y103.125 E.01833
G1 X107.773 Y104.223 E.03717
G1 X108.418 Y104.223 E.02186
G1 X108.418 Y105.773 E.05247
G1 X107.773 Y105.773 E.02186
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X104.086 Y102.725 E.02914
G1 X104.086 Y103.065 E.01151
M204 S1000
G1 X104.234 Y103.497 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X106.728 Y104.72 E.01559
G1 X106.728 Y105.276 E.01885
G1 X107.06 Y105.596 E.01559
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z17.2 F720
G1 X107.385 Y104.752 F10800
G1 Z16.8 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.531415
G1 F900
G1 X106.953 Y105.184 E.02482
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:17
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;17


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X107.385 Y104.752 E-.14111
;WIPE_END
G1 E-.65889 F2100
G1 Z17.2 F720
;AFTER_LAYER_CHANGE
;17
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z17 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X141.08 Y105.366 E.05245
G1 X141.08 Y104.63 E.02491
G1 X142.63 Y104.63 E.05245
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.673 Y105.773 E.05245
G1 X140.673 Y104.223 E.05247
G1 X142.223 Y104.223 E.05245
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.673 Y105.773 E-.35807
G1 X140.673 Y104.223 E-.3579
G1 X140.864 Y104.223 E-.04403
;WIPE_END
G1 E-.04 F2100
G1 Z17.4 F720
G1 X142.833 Y104.998 F10800
G1 Z17 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X141.284 Y104.998 E.04236
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.3578
;WIPE_END
G1 E-.4422 F2100
G1 Z17.4 F720
G1 X146.063 Y103.708 F10800
G1 Z17 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z17.4 F720
G1 X104.516 Y103.532 F10800
G1 Z17 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.09646
G1 X107.366 Y104.63 E.03717
G1 X108.167 Y104.63 E.02713
G1 X108.167 Y105.366 E.02491
G1 X107.366 Y105.366 E.02713
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.456 Y103.532 E.02788
M204 S1000
G1 X104.116 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X105.366 Y103.125 E.04232
G1 X105.366 Y102.725 E.01354
G1 X105.67 Y102.725 E.01029
G1 X105.67 Y103.125 E.01354
G1 X106.957 Y103.125 E.04356
G1 X106.957 Y102.725 E.01354
G1 X107.184 Y102.725 E.0077
G1 X107.184 Y103.125 E.01354
G1 X107.773 Y103.125 E.01991
G1 X107.773 Y104.223 E.03717
G1 X108.574 Y104.223 E.02713
G1 X108.574 Y105.773 E.05247
G1 X107.773 Y105.773 E.02713
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X103.812 Y103.125 E.01987
G1 X103.812 Y102.725 E.01354
G1 X104.116 Y102.725 E.01028
G1 X104.116 Y103.065 E.01151
M204 S1000
G1 X104.202 Y103.516 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z17.4 F720
G1 X107.162 Y104.998 F10800
G1 Z17 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X107.964 Y104.998 E.02191
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:17.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;17.2


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.18506
;WIPE_END
G1 E-.61494 F2100
G1 Z17.4 F720
;AFTER_LAYER_CHANGE
;17.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z17.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X140.842 Y105.366 E.06052
G1 X140.842 Y104.63 E.02491
G1 X142.63 Y104.63 E.06052
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.435 Y105.773 E.06052
G1 X140.435 Y104.223 E.05247
G1 X142.223 Y104.223 E.06052
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.435 Y105.773 E-.41308
G1 X140.435 Y104.271 E-.34692
;WIPE_END
G1 E-.04 F2100
G1 Z17.6 F720
G1 X142.833 Y104.998 F10800
G1 Z17.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X141.045 Y104.998 E.04888
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.41285
;WIPE_END
G1 E-.38715 F2100
G1 Z17.6 F720
G1 X146.063 Y103.708 F10800
G1 Z17.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
M73 P34 R31
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z17.6 F720
G1 X104.42 Y103.532 F10800
G1 Z17.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.09971
G1 X107.366 Y104.63 E.03717
G1 X108.335 Y104.63 E.03283
G1 X108.335 Y105.366 E.02491
G1 X107.366 Y105.366 E.03283
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.36 Y103.532 E.02464
M204 S1000
G1 X104.02 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X105.467 Y103.125 E.04899
G1 X105.467 Y102.725 E.01354
G1 X105.574 Y102.725 E.0036
G1 X105.574 Y103.125 E.01354
G1 X106.319 Y103.125 E.02522
G1 X106.319 Y102.725 E.01354
M73 Q34 S32
G1 X106.33 Y103.125 E.01354
G1 X107.059 Y103.125 E.02466
G1 X107.059 Y102.725 E.01354
G1 X107.078 Y102.725 E.00064
G1 X107.078 Y103.125 E.01354
G1 X107.773 Y103.125 E.02352
G1 X107.773 Y104.223 E.03717
G1 X108.742 Y104.223 E.03283
G1 X108.742 Y105.773 E.05247
G1 X107.773 Y105.773 E.03283
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X103.913 Y103.125 E.0233
G1 X103.913 Y102.725 E.01354
G1 X104.02 Y102.725 E.0036
G1 X104.02 Y103.065 E.01151
M204 S1000
G1 X104.055 Y103.523 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z17.6 F720
G1 X107.162 Y104.998 F10800
G1 Z17.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.132 Y104.998 E.02651
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:17.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;17.4


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.22393
;WIPE_END
G1 E-.57607 F2100
G1 Z17.6 F720
;AFTER_LAYER_CHANGE
;17.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z17.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X140.603 Y105.366 E.06859
G1 X140.603 Y104.63 E.02491
G1 X142.63 Y104.63 E.06859
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.196 Y105.773 E.06859
G1 X140.196 Y104.223 E.05247
G1 X142.223 Y104.223 E.06859
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.196 Y105.773 E-.4681
G1 X140.196 Y104.509 E-.2919
;WIPE_END
G1 E-.04 F2100
G1 Z17.8 F720
G1 X142.833 Y104.998 F10800
G1 Z17.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.807 Y104.998 E.05539
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.46789
;WIPE_END
G1 E-.33211 F2100
G1 Z17.8 F720
G1 X146.063 Y103.708 F10800
G1 Z17.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z17.8 F720
G1 X104.032 Y103.532 F10800
G1 Z17.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.11283
G1 X107.366 Y104.63 E.03717
G1 X108.518 Y104.63 E.039
G1 X108.518 Y105.366 E.02491
G1 X107.366 Y105.366 E.039
G1 X107.366 Y106.868 E.05084
M73 Q34 S31
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.972 Y103.532 E.01151
M204 S1000
G1 X103.358 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.581 Y103.125 E.04141
G1 X104.581 Y102.725 E.01354
G1 X104.912 Y102.725 E.01119
G1 X104.912 Y103.125 E.01354
G1 X106.135 Y103.125 E.0414
G1 X106.135 Y102.725 E.01354
G1 X106.499 Y102.725 E.0123
G1 X106.499 Y103.125 E.01354
G1 X107.64 Y103.125 E.03863
G1 X107.64 Y102.725 E.01354
G1 X107.773 Y102.725 E.00449
G1 X107.773 Y104.223 E.05071
G1 X108.925 Y104.223 E.039
G1 X108.925 Y105.773 E.05247
G1 X107.773 Y105.773 E.039
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.358 Y102.725 E.0045
G1 X103.358 Y103.065 E.01151
M204 S1000
G1 X103.401 Y103.523 F10800
;WIPE_START
G1 F8640
G1 X104.581 Y103.125 E-.28282
G1 X104.581 Y102.725 E-.09236
G1 X104.912 Y102.725 E-.07637
G1 X104.912 Y103.125 E-.09236
G1 X105.848 Y103.125 E-.21609
;WIPE_END
G1 E-.04 F2100
G1 Z17.8 F720
G1 X104.066 Y103.837 F10800
G1 Z17.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z17.8 F720
G1 X107.162 Y104.998 F10800
G1 Z17.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.314 Y104.998 E.0315
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:17.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;17.6


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.26606
;WIPE_END
G1 E-.53394 F2100
G1 Z17.8 F720
;AFTER_LAYER_CHANGE
;17.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.373 Y105.366 F10800
G1 Z17.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.719 Y104.63 E.0458
G1 X108.719 Y105.366 E.02491
G1 X107.433 Y105.366 E.04353
M204 S1000
G1 X107.773 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.223 E.05071
G1 X109.126 Y104.223 E.0458
G1 X109.126 Y105.773 E.05247
G1 X107.833 Y105.773 E.04376
M204 S1000
G1 X107.389 Y105.885 F10800
;WIPE_START
G1 F8640
G1 X107.773 Y107.275 E-.34709
G1 X105.984 Y107.275 E-.41291
;WIPE_END
G1 E-.04 F2100
G1 Z18 F720
G1 X107.162 Y104.998 F10800
G1 Z17.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.515 Y104.998 E.03699
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.3124
;WIPE_END
G1 E-.4876 F2100
G1 Z18 F720
G1 X103.937 Y103.708 F10800
G1 Z17.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z18 F720
G1 X142.63 Y105.373 F10800
G1 Z17.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X140.365 Y105.366 E.07666
G1 X140.365 Y104.63 E.02491
G1 X142.63 Y104.63 E.07666
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.958 Y105.773 E.07666
G1 X139.958 Y104.223 E.05247
G1 X142.223 Y104.223 E.07666
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.958 Y105.773 E-.52312
G1 X139.958 Y104.747 E-.23688
;WIPE_END
G1 E-.04 F2100
G1 Z18 F720
G1 X142.833 Y104.998 F10800
G1 Z17.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.569 Y104.998 E.06191
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.52294
;WIPE_END
G1 E-.27706 F2100
G1 Z18 F720
G1 X146.063 Y103.708 F10800
G1 Z17.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:17.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;17.8


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z18 F720
;AFTER_LAYER_CHANGE
;17.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z17.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X108.944 Y104.63 E.0261
G1 X108.944 Y105.366 E.02491
G1 X107.366 Y105.366 E.05342
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.351 Y104.223 E.05342
G1 X109.351 Y105.773 E.05247
G1 X107.773 Y105.773 E.05342
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.351 Y104.223 E-.36466
G1 X109.351 Y105.773 E-.3579
G1 X109.189 Y105.773 E-.03744
;WIPE_END
G1 E-.04 F2100
G1 Z18.2 F720
G1 X107.162 Y104.998 F10800
G1 Z17.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.74 Y104.998 E.04314
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.36439
;WIPE_END
G1 E-.43561 F2100
G1 Z18.2 F720
G1 X103.937 Y103.708 F10800
G1 Z17.8 F720
M73 P35 R31
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z18.2 F720
G1 X142.63 Y105.373 F10800
G1 Z17.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X140.127 Y105.366 E.08473
G1 X140.127 Y104.63 E.02491
G1 X142.63 Y104.63 E.08473
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
M73 Q35 S31
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.719 Y105.773 E.08473
G1 X139.719 Y104.223 E.05247
G1 X142.223 Y104.223 E.08473
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.719 Y105.773 E-.57815
G1 X139.719 Y104.985 E-.18185
;WIPE_END
G1 E-.04 F2100
G1 Z18.2 F720
G1 X142.833 Y104.998 F10800
G1 Z17.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.33 Y104.998 E.06843
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.57798
;WIPE_END
G1 E-.22202 F2100
G1 Z18.2 F720
G1 X146.063 Y103.708 F10800
G1 Z17.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:18
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;18


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z18.2 F720
;AFTER_LAYER_CHANGE
;18
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z18 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.192 Y104.63 E.03451
G1 X109.192 Y105.366 E.02491
G1 X107.366 Y105.366 E.06183
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.599 Y104.223 E.06183
G1 X109.599 Y105.773 E.05247
G1 X107.773 Y105.773 E.06183
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
M73 P35 R30
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.599 Y104.223 E-.42202
G1 X109.599 Y105.687 E-.33798
;WIPE_END
G1 E-.04 F2100
G1 Z18.4 F720
G1 X107.162 Y104.998 F10800
G1 Z18 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.989 Y104.998 E.04994
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.42179
;WIPE_END
G1 E-.37821 F2100
G1 Z18.4 F720
G1 X103.937 Y103.708 F10800
G1 Z18 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z18.4 F720
G1 X142.63 Y105.373 F10800
G1 Z18 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.888 Y105.366 E.0928
G1 X139.888 Y104.63 E.02491
G1 X142.63 Y104.63 E.0928
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.481 Y105.773 E.0928
G1 X139.481 Y104.223 E.05247
G1 X142.223 Y104.223 E.0928
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.481 Y105.773 E-.63318
G1 X139.481 Y105.224 E-.12682
;WIPE_END
G1 E-.04 F2100
G1 Z18.4 F720
G1 X142.833 Y104.998 F10800
G1 Z18 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.092 Y104.998 E.07495
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.63303
;WIPE_END
G1 E-.16697 F2100
G1 Z18.4 F720
G1 X146.063 Y103.708 F10800
G1 Z18 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:18.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;18.2


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z18.4 F720
;AFTER_LAYER_CHANGE
;18.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z18.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.472 Y104.63 E.04398
G1 X109.472 Y105.366 E.02491
G1 X107.366 Y105.366 E.0713
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.879 Y104.223 E.0713
G1 X109.879 Y105.773 E.05247
G1 X107.773 Y105.773 E.0713
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.879 Y104.223 E-.48655
G1 X109.879 Y105.407 E-.27345
;WIPE_END
G1 E-.04 F2100
G1 Z18.6 F720
G1 X107.162 Y104.998 F10800
G1 Z18.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.268 Y104.998 E.05758
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.48635
;WIPE_END
G1 E-.31365 F2100
G1 Z18.6 F720
G1 X103.937 Y103.708 F10800
G1 Z18.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z18.6 F720
G1 X142.63 Y105.373 F10800
G1 Z18.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.65 Y105.366 E.10087
G1 X139.65 Y104.63 E.02491
G1 X142.63 Y104.63 E.10087
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.243 Y105.773 E.10087
G1 X139.243 Y104.223 E.05247
G1 X142.223 Y104.223 E.10087
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.243 Y105.773 E-.68822
G1 X139.243 Y105.462 E-.07178
;WIPE_END
G1 E-.04 F2100
G1 Z18.6 F720
G1 X142.833 Y104.998 F10800
G1 Z18.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.853 Y104.998 E.08146
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.68808
;WIPE_END
G1 E-.11192 F2100
G1 Z18.6 F720
G1 X146.063 Y103.708 F10800
G1 Z18.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:18.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;18.4


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z18.6 F720
;AFTER_LAYER_CHANGE
;18.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z18.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.788 Y104.63 E.05468
G1 X109.788 Y105.366 E.02491
G1 X107.366 Y105.366 E.082
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
M73 P36 R30
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X110.195 Y104.223 E.082
G1 X110.195 Y105.773 E.05247
G1 X107.773 Y105.773 E.082
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X110.195 Y104.223 E-.55952
G1 X110.195 Y105.091 E-.20048
;WIPE_END
M73 Q36 S31
G1 E-.04 F2100
G1 Z18.8 F720
G1 X107.162 Y104.998 F10800
G1 Z18.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.584 Y104.998 E.06622
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.55934
;WIPE_END
G1 E-.24066 F2100
G1 Z18.8 F720
G1 X103.937 Y103.708 F10800
G1 Z18.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z18.8 F720
G1 X142.63 Y105.373 F10800
G1 Z18.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.411 Y105.366 E.10894
G1 X139.411 Y104.63 E.02491
G1 X142.63 Y104.63 E.10894
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.004 Y105.773 E.10894
G1 X139.004 Y104.223 E.05247
G1 X142.223 Y104.223 E.10894
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.004 Y105.773 E-.74325
G1 X139.004 Y105.7 E-.01675
;WIPE_END
G1 E-.04 F2100
G1 Z18.8 F720
G1 X142.833 Y104.998 F10800
G1 Z18.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.615 Y104.998 E.08798
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.74312
;WIPE_END
G1 E-.05688 F2100
G1 Z18.8 F720
G1 X146.063 Y103.708 F10800
G1 Z18.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:18.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;18.6


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z18.8 F720
;AFTER_LAYER_CHANGE
;18.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z18.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X110.161 Y104.63 E.06732
G1 X110.161 Y105.366 E.02491
G1 X107.366 Y105.366 E.09464
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X110.569 Y104.223 E.09464
G1 X110.569 Y105.773 E.05247
G1 X107.773 Y105.773 E.09464
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
M73 Q36 S30
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X110.569 Y104.223 E-.64572
G1 X110.569 Y104.718 E-.11428
;WIPE_END
G1 E-.04 F2100
G1 Z19 F720
G1 X107.162 Y104.998 F10800
G1 Z18.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.958 Y104.998 E.07643
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.64557
;WIPE_END
G1 E-.15443 F2100
G1 Z19 F720
G1 X103.937 Y103.708 F10800
G1 Z18.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z19 F720
G1 X142.63 Y105.373 F10800
G1 Z18.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.173 Y105.366 E.11701
G1 X139.173 Y104.63 E.02491
G1 X142.63 Y104.63 E.11701
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X138.766 Y105.773 E.11701
G1 X138.766 Y104.223 E.05247
G1 X142.223 Y104.223 E.11701
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X138.932 Y105.776 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z19 F720
G1 X142.833 Y104.998 F10800
G1 Z18.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.377 Y104.998 E.0945
;WIPE_START
G1 F8640
G1 X142.668 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z19 F720
G1 X146.063 Y103.708 F10800
G1 Z18.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:18.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;18.8


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z19 F720
;AFTER_LAYER_CHANGE
;18.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.373 Y105.366 F10800
G1 Z18.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F945
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X110.994 Y104.63 E.1228
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X138.341 Y104.63 E.87939
;TYPE:Perimeter
;WIDTH:0.45
G1 F945
G1 X142.63 Y104.63 E.14517
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.366 E.05084
G1 X138.341 Y105.366 E.14517
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X110.994 Y105.366 E.87939
;TYPE:Perimeter
;WIDTH:0.45
G1 F945
G1 X107.433 Y105.366 E.12053
M204 S1000
G1 X107.773 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F945
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.223 E.05071
G1 X110.994 Y104.223 E.10902
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X138.341 Y104.223 E.87939
;TYPE:External perimeter
;WIDTH:0.45
G1 F945
G1 X142.223 Y104.223 E.13139
G1 X142.223 Y102.725 E.05071
M73 P37 R30
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X138.341 Y105.773 E.13139
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X110.994 Y105.773 E.87939
;TYPE:External perimeter
;WIDTH:0.45
G1 F945
M73 Q37 S30
G1 X107.833 Y105.773 E.10699
M204 S1000
;WIPE_START
G1 F8640
G1 X107.773 Y107.275 E-.34709
G1 X105.984 Y107.275 E-.41291
;WIPE_END
G1 E-.04 F2100
G1 Z19.2 F720
G1 X107.162 Y104.998 F10800
G1 Z18.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F945
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z19.2 F720
G1 X146.063 Y103.708 F10800
G1 Z18.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F945
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z19.2 F720
G1 X103.937 Y106.292 F10800
G1 Z18.8 F720
G1 E.8 F2100
G1 F945
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:19
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;19


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z19.2 F720
;AFTER_LAYER_CHANGE
;19
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z19 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F1087
G1 X142.63 Y104.63 E1.16633
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.366 E.05084
G1 X107.366 Y105.366 E1.19365
G1 X107.366 Y106.868 E.05084
M73 P37 R29
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F1087
G1 X142.223 Y104.223 E1.16609
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X107.773 Y105.773 E1.16609
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X111.064 Y104.169 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z19.4 F720
G1 X107.162 Y104.998 F10800
G1 Z19 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F1087
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z19.4 F720
G1 X146.063 Y103.708 F10800
G1 Z19 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F1087
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z19.4 F720
G1 X103.937 Y106.292 F10800
G1 Z19 F720
G1 E.8 F2100
G1 F1087
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:19.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;19.2


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z19.4 F720
;AFTER_LAYER_CHANGE
;19.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z19.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F1087
G1 X142.63 Y104.63 E1.16633
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.366 E.05084
G1 X107.366 Y105.366 E1.19365
G1 X107.366 Y106.868 E.05084
M73 P38 R29
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F1087
G1 X142.223 Y104.223 E1.16609
G1 X142.223 Y102.725 E.05071
M73 Q38 S30
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X107.773 Y105.773 E1.16609
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X111.064 Y104.169 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z19.6 F720
G1 X107.162 Y104.998 F10800
G1 Z19.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F1087
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z19.6 F720
G1 X146.063 Y103.708 F10800
G1 Z19.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F1087
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z19.6 F720
G1 X103.937 Y106.292 F10800
G1 Z19.2 F720
G1 E.8 F2100
G1 F1087
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:19.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;19.4


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z19.6 F720
;AFTER_LAYER_CHANGE
;19.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z19.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z19.8 F720
G1 X104.135 Y103.906 F10800
G1 Z19.4 F720
M73 Q38 S29
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X104.135 Y103.635 E.00916
G1 X106.364 Y103.635 E.07546
G1 X106.863 Y104.134 E.02385
G1 X106.863 Y105.866 E.05866
G1 X106.368 Y106.361 E.02366
G1 X104.135 Y106.361 E.0756
G1 X104.135 Y106.094 E.00902
;WIPE_START
G1 F8640
G1 X104.135 Y106.361 E-.06155
G1 X106.368 Y106.361 E-.51571
G1 X106.863 Y105.866 E-.16137
G1 X106.863 Y105.774 E-.02138
;WIPE_END
G1 E-.04 F2100
G1 Z19.8 F720
G1 X142.832 Y106.266 F10800
G1 Z19.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.832 Y103.33 E.09937
G1 X146.166 Y103.33 E.11283
G1 X146.166 Y106.666 E.11291
G1 X142.832 Y106.666 E.11283
G1 X142.832 Y106.326 E.01151
M204 S1000
G1 X142.425 Y107.073 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.485 Y107.073 E.13836
M204 S1000
G1 X142.529 Y106.687 F10800
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z19.8 F720
G1 X145.86 Y106.089 F10800
G1 Z19.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X145.86 Y106.361 E.00918
G1 X143.632 Y106.361 E.07544
G1 X143.137 Y105.866 E.02365
G1 X143.137 Y104.134 E.05866
G1 X143.636 Y103.635 E.02385
G1 X145.86 Y103.635 E.0753
G1 X145.86 Y103.911 E.00932
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:19.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;19.6


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X145.86 Y103.635 E-.06356
G1 X143.636 Y103.635 E-.51369
G1 X143.137 Y104.134 E-.16267
G1 X143.137 Y104.22 E-.02007
;WIPE_END
G1 E-.04 F2100
G1 Z19.8 F720
;AFTER_LAYER_CHANGE
;19.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z19.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z20 F720
G1 X104.135 Y103.906 F10800
G1 Z19.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X104.135 Y103.635 E.00916
G1 X106.364 Y103.635 E.07546
G1 X106.863 Y104.134 E.02385
G1 X106.863 Y105.866 E.05866
G1 X106.368 Y106.361 E.02366
G1 X104.135 Y106.361 E.0756
G1 X104.135 Y106.094 E.00902
;WIPE_START
G1 F8640
G1 X104.135 Y106.361 E-.06155
G1 X106.368 Y106.361 E-.51571
G1 X106.863 Y105.866 E-.16137
G1 X106.863 Y105.774 E-.02138
;WIPE_END
G1 E-.04 F2100
G1 Z20 F720
G1 X142.832 Y106.266 F10800
G1 Z19.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.832 Y103.33 E.09937
G1 X146.166 Y103.33 E.11283
G1 X146.166 Y106.666 E.11291
G1 X142.832 Y106.666 E.11283
G1 X142.832 Y106.326 E.01151
M204 S1000
G1 X142.425 Y107.073 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.485 Y107.073 E.13836
M204 S1000
G1 X142.529 Y106.687 F10800
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z20 F720
G1 X145.86 Y106.089 F10800
G1 Z19.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X145.86 Y106.361 E.00918
G1 X143.632 Y106.361 E.07544
G1 X143.137 Y105.866 E.02365
G1 X143.137 Y104.134 E.05866
G1 X143.636 Y103.635 E.02385
G1 X145.86 Y103.635 E.0753
G1 X145.86 Y103.911 E.00932
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:19.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;19.8


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X145.86 Y103.635 E-.06356
G1 X143.636 Y103.635 E-.51369
G1 X143.137 Y104.134 E-.16267
G1 X143.137 Y104.22 E-.02007
;WIPE_END
G1 E-.04 F2100
G1 Z20 F720
;AFTER_LAYER_CHANGE
;19.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z19.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
M73 P39 R29
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z20.2 F720
G1 X104.135 Y103.906 F10800
G1 Z19.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X104.135 Y103.635 E.00916
G1 X106.364 Y103.635 E.07546
G1 X106.863 Y104.134 E.02385
G1 X106.863 Y105.866 E.05866
G1 X106.368 Y106.361 E.02366
G1 X104.135 Y106.361 E.0756
G1 X104.135 Y106.094 E.00902
;WIPE_START
G1 F8640
G1 X104.135 Y106.361 E-.06155
G1 X106.368 Y106.361 E-.51571
G1 X106.863 Y105.866 E-.16137
G1 X106.863 Y105.774 E-.02138
;WIPE_END
G1 E-.04 F2100
G1 Z20.2 F720
G1 X142.832 Y106.266 F10800
G1 Z19.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.832 Y103.33 E.09937
G1 X146.166 Y103.33 E.11283
G1 X146.166 Y106.666 E.11291
M73 Q39 S29
G1 X142.832 Y106.666 E.11283
G1 X142.832 Y106.326 E.01151
M204 S1000
G1 X142.425 Y107.073 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.485 Y107.073 E.13836
M204 S1000
G1 X142.529 Y106.687 F10800
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z20.2 F720
G1 X145.86 Y106.089 F10800
G1 Z19.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X145.86 Y106.361 E.00918
G1 X143.632 Y106.361 E.07544
G1 X143.137 Y105.866 E.02365
G1 X143.137 Y104.134 E.05866
G1 X143.636 Y103.635 E.02385
G1 X145.86 Y103.635 E.0753
G1 X145.86 Y103.911 E.00932
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:20
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;20


 M104 S220 M109 S220 






;WIPE_START
G1 F8640
G1 X145.86 Y103.635 E-.06356
G1 X143.636 Y103.635 E-.51369
G1 X143.137 Y104.134 E-.16267
G1 X143.137 Y104.22 E-.02007
;WIPE_END
G1 E-.04 F2100
G1 Z20.2 F720
;AFTER_LAYER_CHANGE
;20
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z20 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z20.4 F720
G1 X146.063 Y103.708 F10800
G1 Z20 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z20.4 F720
G1 X106.966 Y106.868 F10800
G1 Z20 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z20.4 F720
G1 X103.937 Y106.292 F10800
G1 Z20 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:20.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;20.2



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z20.4 F720
;AFTER_LAYER_CHANGE
;20.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z20.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
M73 P39 R28
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z20.6 F720
G1 X146.063 Y103.708 F10800
G1 Z20.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z20.6 F720
G1 X106.966 Y106.868 F10800
G1 Z20.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z20.6 F720
G1 X103.937 Y106.292 F10800
G1 Z20.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:20.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;20.4



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z20.6 F720
;AFTER_LAYER_CHANGE
;20.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z20.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z20.8 F720
G1 X146.063 Y103.708 F10800
G1 Z20.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z20.8 F720
G1 X106.966 Y106.868 F10800
G1 Z20.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z20.8 F720
G1 X103.937 Y106.292 F10800
G1 Z20.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:20.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;20.6



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z20.8 F720
;AFTER_LAYER_CHANGE
;20.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z20.6 F720
M73 P40 R28
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
M73 Q40 S29
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z21 F720
G1 X146.063 Y103.708 F10800
G1 Z20.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z21 F720
G1 X106.966 Y106.868 F10800
G1 Z20.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z21 F720
G1 X103.937 Y106.292 F10800
G1 Z20.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:20.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;20.8



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z21 F720
;AFTER_LAYER_CHANGE
;20.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z20.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z21.2 F720
G1 X146.063 Y103.708 F10800
G1 Z20.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z21.2 F720
G1 X106.966 Y106.868 F10800
G1 Z20.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z21.2 F720
G1 X103.937 Y106.292 F10800
G1 Z20.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:21
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;21



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z21.2 F720
;AFTER_LAYER_CHANGE
;21
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z21 F720
M73 Q40 S28
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z21.4 F720
G1 X146.063 Y103.708 F10800
G1 Z21 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z21.4 F720
G1 X106.966 Y106.868 F10800
G1 Z21 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z21.4 F720
G1 X103.937 Y106.292 F10800
G1 Z21 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:21.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;21.2



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z21.4 F720
;AFTER_LAYER_CHANGE
;21.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z21.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z21.6 F720
G1 X146.063 Y103.708 F10800
G1 Z21.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z21.6 F720
G1 X106.966 Y106.868 F10800
G1 Z21.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
M73 P41 R28
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z21.6 F720
G1 X103.937 Y106.292 F10800
G1 Z21.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
M73 Q41 S28
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:21.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;21.4



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z21.6 F720
;AFTER_LAYER_CHANGE
;21.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z21.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z21.8 F720
G1 X146.063 Y103.708 F10800
G1 Z21.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z21.8 F720
G1 X106.966 Y106.868 F10800
G1 Z21.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z21.8 F720
G1 X103.937 Y106.292 F10800
G1 Z21.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:21.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;21.6



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z21.8 F720
;AFTER_LAYER_CHANGE
;21.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z21.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z22 F720
G1 X146.063 Y103.708 F10800
G1 Z21.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z22 F720
G1 X106.966 Y106.868 F10800
G1 Z21.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
M73 P41 R27
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z22 F720
G1 X103.937 Y106.292 F10800
G1 Z21.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:21.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;21.8



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z22 F720
;AFTER_LAYER_CHANGE
;21.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z21.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z22.2 F720
G1 X146.063 Y103.708 F10800
G1 Z21.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z22.2 F720
G1 X105.707 Y103.532 F10800
G1 Z21.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.05614
G1 X107.366 Y106.868 E.11291
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X105.647 Y103.532 E.0682
M204 S1000
G1 X105.307 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X106.003 Y103.125 E.02356
G1 X106.003 Y102.725 E.01354
G1 X106.406 Y102.725 E.01365
G1 X106.406 Y103.125 E.01354
G1 X107.686 Y103.125 E.04333
G1 X107.686 Y102.725 E.01354
G1 X107.773 Y102.725 E.00293
G1 X107.773 Y107.275 E.15401
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X104.815 Y103.125 E.05381
G1 X104.815 Y102.725 E.01354
G1 X105.307 Y102.725 E.01666
G1 X105.307 Y103.065 E.01151
M204 S1000
G1 X105.424 Y103.508 F10800
G1 X105.061 Y102.929
;TYPE:Gap fill
;WIDTH:0.127966
G1 F900
G1 X105.061 Y103.329 E.00283
;WIPE_START
G1 F8640
G1 X105.061 Y102.929 E-.09236
;WIPE_END
G1 E-.70764 F2100
G1 Z22.2 F720
G1 X104.066 Y103.837 F10800
G1 Z21.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y105.669 E.04528
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:22
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;22



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z22.2 F720
;AFTER_LAYER_CHANGE
;22
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y106.468 F10800
G1 Z22 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.63 Y105.366 E.0373
G1 X142.511 Y105.366 E.00403
G1 X142.511 Y104.63 E.02491
G1 X142.63 Y104.63 E.00403
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y106.528 E.01151
M204 S1000
G1 X142.223 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.223 Y105.773 E.05084
G1 X142.103 Y105.773 E.00403
G1 X142.103 Y104.223 E.05247
G1 X142.223 Y104.223 E.00403
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.283 Y107.275 E.15206
M204 S1000
M73 P42 R27
G1 X142.326 Y106.889 F10800
;WIPE_START
G1 F8640
G1 X142.223 Y105.773 E-.34709
G1 X142.103 Y105.773 E-.02752
G1 X142.103 Y104.223 E-.3579
G1 X142.222 Y104.223 E-.02748
;WIPE_END
G1 E-.04 F2100
G1 Z22.4 F720
G1 X142.774 Y105.162 F10800
G1 Z22 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.162106
G1 F900
G1 X142.774 Y104.834 E.00326
;WIPE_START
G1 F8640
G1 X142.774 Y105.162 E-.07591
;WIPE_END
G1 E-.72409 F2100
G1 Z22.4 F720
G1 X146.063 Y103.708 F10800
G1 Z22 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.528 E.00651
G1 X143.16 Y104.528 E.00762
G1 X143.16 Y105.468 E.0318
G1 X142.935 Y105.468 E.00762
G1 X142.935 Y105.664 E.00665
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z22.4 F720
M73 Q42 S28
G1 X105.707 Y103.532 F10800
G1 Z22 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.05614
G1 X107.366 Y104.63 E.03717
G1 X107.414 Y104.63 E.00165
G1 X107.414 Y105.366 E.02491
G1 X107.366 Y105.366 E.00165
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.285 Y103.532 E.02211
G1 X104.285 Y103.132 E.01354
G1 X104.9 Y103.132 E.0208
G1 X104.9 Y103.532 E.01354
G1 X105.647 Y103.532 E.02529
M204 S1000
G1 X105.307 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X106.003 Y103.125 E.02356
G1 X106.003 Y102.725 E.01354
G1 X106.241 Y102.725 E.00805
G1 X106.241 Y103.125 E.01354
G1 X106.992 Y103.125 E.02543
G1 X106.992 Y102.725 E.01354
G1 X107.125 Y102.725 E.0045
G1 X107.125 Y103.125 E.01354
G1 X107.773 Y103.125 E.02192
G1 X107.773 Y104.223 E.03717
G1 X107.821 Y104.223 E.00165
G1 X107.821 Y105.773 E.05247
G1 X107.773 Y105.773 E.00165
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X103.878 Y103.125 E.02211
G1 X103.878 Y102.725 E.01354
G1 X105.307 Y102.725 E.04836
G1 X105.307 Y103.065 E.01151
M204 S1000
G1 X105.475 Y103.488 F10800
G1 X104.59 Y103.561
;TYPE:Internal infill
G1 F900
G1 X104.595 Y103.437 E.0042
G1 X104.595 Y103.837 E.01354
G1 X106.566 Y103.837 E.06675
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.935 E.02045
G1 X107.109 Y104.935 E.00165
G1 X107.109 Y105.061 E.00424
G1 X107.06 Y105.061 E.00165
G1 X107.06 Y105.669 E.02059
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:22.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;22.2



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z22.4 F720
;AFTER_LAYER_CHANGE
;22.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z22.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.272 Y105.366 E.01211
G1 X142.272 Y104.63 E.02491
G1 X142.63 Y104.63 E.0121
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.865 Y105.773 E.0121
G1 X141.865 Y104.223 E.05247
G1 X142.223 Y104.223 E.0121
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.078 Y105.446 F10800
;WIPE_START
G1 F8640
G1 X141.865 Y105.773 E-.08372
G1 X141.865 Y104.223 E-.3579
G1 X142.223 Y104.223 E-.08257
G1 X142.223 Y103.202 E-.23581
;WIPE_END
G1 E-.04 F2100
G1 Z22.6 F720
G1 X146.063 Y106.292 F10800
G1 Z22.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y106.563 E.00917
G1 X143.834 Y106.563 E.07545
G1 X142.935 Y105.664 E.04301
G1 X142.935 Y105.596 E.00231
G1 X142.969 Y105.596 E.00114
G1 X143.288 Y105.276 E.0153
G1 X143.288 Y104.72 E.01885
G1 X142.969 Y104.4 E.0153
G1 X142.935 Y104.4 E.00114
G1 X142.935 Y104.336 E.00217
G1 X143.834 Y103.437 E.04301
G1 X146.063 Y103.437 E.07545
G1 X146.063 Y103.708 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y103.437 E-.06255
G1 X143.834 Y103.437 E-.5147
G1 X143.274 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z22.6 F720
G1 X104.032 Y103.532 F10800
G1 Z22.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X104.489 Y103.532 E.01545
G1 X104.489 Y103.132 E.01354
G1 X104.9 Y103.132 E.01392
G1 X104.9 Y103.532 E.01354
G1 X107.366 Y103.532 E.08346
G1 X107.366 Y104.63 E.03717
G1 X107.512 Y104.63 E.00494
G1 X107.512 Y105.366 E.02491
G1 X107.366 Y105.366 E.00494
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.972 Y103.532 E.01151
M204 S1000
G1 X103.294 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.082 Y103.125 E.02667
G1 X104.082 Y102.725 E.01354
G1 X105.307 Y102.725 E.04148
G1 X105.307 Y103.125 E.01354
G1 X106.003 Y103.125 E.02356
G1 X106.003 Y102.725 E.01354
G1 X106.187 Y102.725 E.00623
G1 X106.187 Y103.125 E.01354
G1 X106.899 Y103.125 E.0241
G1 X106.899 Y102.725 E.01354
G1 X107.229 Y102.725 E.01118
G1 X107.229 Y103.125 E.01354
G1 X107.773 Y103.125 E.01839
G1 X107.773 Y104.223 E.03717
G1 X107.919 Y104.223 E.00494
G1 X107.919 Y105.773 E.05247
G1 X107.773 Y105.773 E.00494
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.294 Y102.725 E.00232
G1 X103.294 Y103.065 E.01151
M204 S1000
G1 X103.316 Y103.524 F10800
;WIPE_START
G1 F8640
G1 X104.082 Y103.125 E-.18247
G1 X104.082 Y102.725 E-.09236
G1 X105.307 Y102.725 E-.28293
G1 X105.307 Y103.125 E-.09236
G1 X105.783 Y103.125 E-.10987
;WIPE_END
G1 E-.04 F2100
G1 Z22.6 F720
G1 X104.066 Y103.837 F10800
G1 Z22.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.528 E.00667
G1 X106.835 Y104.528 E.00762
G1 X106.835 Y105.468 E.0318
G1 X107.06 Y105.468 E.00762
G1 X107.06 Y105.669 E.00681
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z22.6 F720
G1 X107.235 Y105.162 F10800
G1 Z22.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.18897
G1 F900
G1 X107.235 Y104.834 E.00399
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:22.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;22.4



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X107.235 Y105.162 E-.07591
;WIPE_END
G1 E-.72409 F2100
G1 Z22.6 F720
;AFTER_LAYER_CHANGE
;22.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z22.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X142.034 Y105.366 E.02017
G1 X142.034 Y104.63 E.02491
G1 X142.63 Y104.63 E.02017
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.627 Y105.773 E.02017
G1 X141.627 Y104.223 E.05247
G1 X142.223 Y104.223 E.02017
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
M73 Q42 S27
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X141.627 Y105.773 E-.13831
G1 X141.627 Y104.223 E-.3579
G1 X142.223 Y104.223 E-.13762
G1 X142.223 Y103.677 E-.12617
;WIPE_END
G1 E-.04 F2100
G1 Z22.8 F720
G1 X143.064 Y104.867 F10800
G1 Z22.4 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.531415
G1 F900
G1 X142.688 Y105.244 E.02165
;WIPE_START
G1 F8640
G1 X143.064 Y104.867 E-.12306
;WIPE_END
G1 E-.67694 F2100
G1 Z22.8 F720
G1 X146.063 Y106.292 F10800
G1 Z22.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y106.563 E.00917
G1 X143.834 Y106.563 E.07545
G1 X142.935 Y105.664 E.04301
G1 X142.935 Y105.596 E.00231
G1 X142.969 Y105.596 E.00114
G1 X143.288 Y105.276 E.0153
G1 X143.288 Y104.72 E.01885
G1 X142.969 Y104.4 E.0153
G1 X142.935 Y104.4 E.00114
G1 X142.935 Y104.336 E.00217
G1 X143.834 Y103.437 E.04301
G1 X146.063 Y103.437 E.07545
G1 X146.063 Y103.708 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y103.437 E-.06256
G1 X143.834 Y103.437 E-.5147
G1 X143.274 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z22.8 F720
G1 X104.032 Y103.532 F10800
G1 Z22.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X104.721 Y103.532 E.02332
G1 X104.721 Y103.132 E.01354
G1 X104.9 Y103.132 E.00605
G1 X104.9 Y103.532 E.01354
G1 X106.41 Y103.532 E.05112
G1 X106.41 Y103.132 E.01354
G1 X106.837 Y103.132 E.01444
G1 X106.837 Y103.532 E.01354
G1 X107.366 Y103.532 E.0179
G1 X107.366 Y104.63 E.03717
G1 X107.623 Y104.63 E.0087
G1 X107.623 Y105.366 E.02491
G1 X107.366 Y105.366 E.0087
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.972 Y103.532 E.01151
M204 S1000
G1 X103.508 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.314 Y103.125 E.02729
G1 X104.314 Y102.725 E.01354
G1 X105.307 Y102.725 E.03361
G1 X105.307 Y103.125 E.01354
G1 X106.003 Y103.125 E.02356
G1 X106.003 Y102.725 E.01354
G1 X107.244 Y102.725 E.042
G1 X107.244 Y103.125 E.01354
G1 X107.773 Y103.125 E.0179
G1 X107.773 Y104.223 E.03717
G1 X108.03 Y104.223 E.0087
G1 X108.03 Y105.773 E.05247
G1 X107.773 Y105.773 E.0087
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.508 Y102.725 E.00958
G1 X103.508 Y103.065 E.01151
M204 S1000
G1 X103.589 Y103.517 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:22.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;22.6



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z22.8 F720
;AFTER_LAYER_CHANGE
;22.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z22.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X141.795 Y105.366 E.02824
G1 X141.795 Y104.63 E.02491
G1 X142.63 Y104.63 E.02824
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.388 Y105.773 E.02824
G1 X141.388 Y104.223 E.05247
G1 X142.223 Y104.223 E.02824
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
G1 X141.999 Y104.998
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X142.833 Y104.998 E.02281
;WIPE_START
G1 F8640
G1 X141.999 Y104.998 E-.19266
;WIPE_END
G1 E-.60734 F2100
G1 Z23 F720
G1 X146.063 Y103.708 F10800
G1 Z22.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z23 F720
G1 X104.144 Y103.532 F10800
G1 Z22.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X106.41 Y103.532 E.07669
G1 X106.41 Y103.132 E.01354
G1 X106.781 Y103.132 E.01255
G1 X106.781 Y103.532 E.01354
G1 X107.366 Y103.532 E.0198
G1 X107.366 Y104.63 E.03717
G1 X107.742 Y104.63 E.01274
M73 P43 R27
G1 X107.742 Y105.366 E.02491
G1 X107.366 Y105.366 E.01274
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.084 Y103.532 E.01531
M204 S1000
G1 X103.744 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.529 Y103.125 E.02655
G1 X104.529 Y102.725 E.01354
G1 X105.307 Y102.725 E.02633
G1 X105.307 Y103.125 E.01354
G1 X106.003 Y103.125 E.02356
G1 X106.003 Y102.725 E.01354
G1 X107.188 Y102.725 E.04011
G1 X107.188 Y103.125 E.01354
G1 X107.773 Y103.125 E.0198
G1 X107.773 Y104.223 E.03717
G1 X108.149 Y104.223 E.01274
G1 X108.149 Y105.773 E.05247
G1 X107.773 Y105.773 E.01274
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.744 Y102.725 E.01758
M73 Q43 S27
G1 X103.744 Y103.065 E.01151
M204 S1000
G1 X103.865 Y103.507 F10800
G1 X103.485 Y102.929
;TYPE:Gap fill
;WIDTH:0.155316
G1 F900
G1 X103.485 Y103.329 E.00374
G1 X104.066 Y103.837 F10800
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:22.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;22.8



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z23 F720
;AFTER_LAYER_CHANGE
;22.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z22.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X141.557 Y105.366 E.03631
G1 X141.557 Y104.63 E.02491
G1 X142.63 Y104.63 E.03631
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.15 Y105.773 E.03631
G1 X141.15 Y104.223 E.05247
G1 X142.223 Y104.223 E.03631
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
G1 X141.76 Y104.998
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X142.833 Y104.998 E.02933
;WIPE_START
G1 F8640
G1 X141.76 Y104.998 E-.24771
;WIPE_END
G1 E-.55229 F2100
G1 Z23.2 F720
G1 X146.063 Y103.708 F10800
G1 Z22.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z23.2 F720
G1 X104.339 Y103.532 F10800
G1 Z22.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.10244
G1 X107.366 Y104.63 E.03717
G1 X107.87 Y104.63 E.01708
G1 X107.87 Y105.366 E.02491
G1 X107.366 Y105.366 E.01708
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.279 Y103.532 E.02191
M204 S1000
G1 X103.939 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.698 Y103.125 E.02568
G1 X104.698 Y102.725 E.01354
G1 X105.307 Y102.725 E.02061
G1 X105.307 Y103.125 E.01354
G1 X106.003 Y103.125 E.02356
G1 X106.003 Y102.725 E.01354
G1 X106.254 Y102.725 E.00851
G1 X106.254 Y103.125 E.01354
G1 X107.773 Y103.125 E.05139
G1 X107.773 Y104.223 E.03717
G1 X108.277 Y104.223 E.01708
G1 X108.277 Y105.773 E.05247
G1 X107.773 Y105.773 E.01708
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.939 Y102.725 E.02418
G1 X103.939 Y103.065 E.01151
M204 S1000
G1 X104.078 Y103.5 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:23
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;23



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z23.2 F720
;AFTER_LAYER_CHANGE
;23
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z23 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X141.319 Y105.366 E.04438
G1 X141.319 Y104.63 E.02491
G1 X142.63 Y104.63 E.04438
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.911 Y105.773 E.04438
G1 X140.911 Y104.223 E.05247
G1 X142.223 Y104.223 E.04438
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.911 Y105.773 E-.30307
G1 X140.911 Y104.223 E-.3579
G1 X141.34 Y104.223 E-.09903
;WIPE_END
G1 E-.04 F2100
G1 Z23.4 F720
G1 X142.833 Y104.998 F10800
G1 Z23 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X141.522 Y104.998 E.03584
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.30275
;WIPE_END
G1 E-.49725 F2100
G1 Z23.4 F720
G1 X146.063 Y103.708 F10800
G1 Z23 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z23.4 F720
G1 X104.475 Y103.532 F10800
G1 Z23 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.09784
G1 X107.366 Y104.63 E.03717
G1 X108.011 Y104.63 E.02186
G1 X108.011 Y105.366 E.02491
G1 X107.366 Y105.366 E.02186
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X103.668 Y103.132 E.00121
G1 X103.668 Y103.532 E.01354
G1 X104.415 Y103.532 E.02529
M204 S1000
G1 X104.075 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.79 Y103.125 E.02421
G1 X104.79 Y102.725 E.01354
G1 X105.307 Y102.725 E.01749
G1 X105.307 Y103.125 E.01354
G1 X106.003 Y103.125 E.02356
G1 X106.003 Y102.725 E.01354
G1 X106.292 Y102.725 E.00979
G1 X106.292 Y103.125 E.01354
G1 X107.519 Y103.125 E.04152
G1 X107.519 Y102.725 E.01354
G1 X107.773 Y102.725 E.0086
G1 X107.773 Y104.223 E.05071
G1 X108.418 Y104.223 E.02186
G1 X108.418 Y105.773 E.05247
G1 X107.773 Y105.773 E.02186
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
M73 P43 R26
G1 X104.075 Y102.725 E.02877
G1 X104.075 Y103.065 E.01151
M204 S1000
G1 X104.222 Y103.497 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X106.728 Y104.72 E.01559
G1 X106.728 Y105.276 E.01885
G1 X107.06 Y105.596 E.01559
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z23.4 F720
G1 X105.048 Y102.929 F10800
G1 Z23 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.15261
G1 F900
G1 X105.048 Y103.329 E.00365
;WIPE_START
G1 F8640
G1 X105.048 Y102.929 E-.09236
;WIPE_END
G1 E-.70764 F2100
G1 Z23.4 F720
G1 X106.953 Y104.812 F10800
G1 Z23 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.531415
G1 F900
G1 X107.385 Y105.244 E.02482
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:23.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;23.2



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X106.953 Y104.812 E-.14111
;WIPE_END
G1 E-.65889 F2100
G1 Z23.4 F720
;AFTER_LAYER_CHANGE
;23.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z23.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X141.08 Y105.366 E.05245
G1 X141.08 Y104.63 E.02491
G1 X142.63 Y104.63 E.05245
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.673 Y105.773 E.05245
G1 X140.673 Y104.223 E.05247
G1 X142.223 Y104.223 E.05245
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.673 Y105.773 E-.35807
G1 X140.673 Y104.223 E-.3579
G1 X140.864 Y104.223 E-.04403
;WIPE_END
G1 E-.04 F2100
G1 Z23.6 F720
G1 X142.833 Y104.998 F10800
G1 Z23.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X141.284 Y104.998 E.04236
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.3578
;WIPE_END
G1 E-.4422 F2100
G1 Z23.6 F720
G1 X146.063 Y103.708 F10800
G1 Z23.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z23.6 F720
G1 X104.504 Y103.532 F10800
G1 Z23.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.09686
G1 X107.366 Y104.63 E.03717
G1 X108.167 Y104.63 E.02713
G1 X108.167 Y105.366 E.02491
G1 X107.366 Y105.366 E.02713
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.444 Y103.532 E.02748
M204 S1000
G1 X104.104 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.806 Y103.125 E.02375
G1 X104.806 Y102.725 E.01354
G1 X104.817 Y103.125 E.01354
G1 X106.003 Y103.125 E.04015
G1 X106.003 Y102.725 E.01354
G1 X106.33 Y102.725 E.01106
G1 X106.33 Y103.125 E.01354
G1 X107.017 Y103.125 E.02326
G1 X107.017 Y102.725 E.01354
G1 X107.773 Y102.725 E.02558
G1 X107.773 Y104.223 E.05071
G1 X108.574 Y104.223 E.02713
G1 X108.574 Y105.773 E.05247
G1 X107.773 Y105.773 E.02713
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
M73 P44 R26
G1 X103.801 Y103.125 E.01951
G1 X103.801 Y102.725 E.01354
G1 X104.104 Y102.725 E.01024
G1 X104.104 Y103.065 E.01151
M204 S1000
G1 X104.19 Y103.516 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z23.6 F720
G1 X107.162 Y104.998 F10800
G1 Z23.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X107.964 Y104.998 E.02191
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:23.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;23.4



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.18506
;WIPE_END
G1 E-.61494 F2100
G1 Z23.6 F720
;AFTER_LAYER_CHANGE
;23.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
M73 Q44 S27
G1 Z23.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X140.842 Y105.366 E.06052
G1 X140.842 Y104.63 E.02491
G1 X142.63 Y104.63 E.06052
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.435 Y105.773 E.06052
G1 X140.435 Y104.223 E.05247
G1 X142.223 Y104.223 E.06052
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.435 Y105.773 E-.41308
G1 X140.435 Y104.271 E-.34692
;WIPE_END
G1 E-.04 F2100
G1 Z23.8 F720
G1 X142.833 Y104.998 F10800
G1 Z23.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X141.045 Y104.998 E.04888
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.41284
;WIPE_END
G1 E-.38716 F2100
G1 Z23.8 F720
G1 X146.063 Y103.708 F10800
G1 Z23.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z23.8 F720
G1 X104.408 Y103.532 F10800
G1 Z23.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.1001
G1 X107.366 Y104.63 E.03717
G1 X108.335 Y104.63 E.03283
G1 X108.335 Y105.366 E.02491
G1 X107.366 Y105.366 E.03283
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.348 Y103.532 E.02424
M204 S1000
G1 X104.008 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.755 Y103.125 E.02527
G1 X104.755 Y102.725 E.01354
G1 X105.127 Y102.725 E.01261
G1 X105.127 Y103.125 E.01354
G1 X106.003 Y103.125 E.02964
G1 X106.003 Y102.725 E.01354
G1 X106.367 Y102.725 E.01234
G1 X106.367 Y103.125 E.01354
G1 X107.057 Y103.125 E.02334
G1 X107.057 Y102.725 E.01354
G1 X107.773 Y102.725 E.02422
G1 X107.773 Y104.223 E.05071
G1 X108.742 Y104.223 E.03283
G1 X108.742 Y105.773 E.05247
G1 X107.773 Y105.773 E.03283
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X103.902 Y103.125 E.02291
G1 X103.902 Y102.725 E.01354
G1 X104.008 Y102.725 E.0036
G1 X104.008 Y103.065 E.01151
M204 S1000
G1 X104.043 Y103.523 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z23.8 F720
G1 X107.162 Y104.998 F10800
G1 Z23.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.132 Y104.998 E.02651
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:23.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;23.6



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.22392
;WIPE_END
G1 E-.57608 F2100
G1 Z23.8 F720
;AFTER_LAYER_CHANGE
;23.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z23.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X140.603 Y105.366 E.06859
G1 X140.603 Y104.63 E.02491
G1 X142.63 Y104.63 E.06859
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.196 Y105.773 E.06859
G1 X140.196 Y104.223 E.05247
G1 X142.223 Y104.223 E.06859
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.196 Y105.773 E-.4681
G1 X140.196 Y104.509 E-.2919
;WIPE_END
G1 E-.04 F2100
G1 Z24 F720
G1 X142.833 Y104.998 F10800
G1 Z23.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.807 Y104.998 E.05539
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.46789
;WIPE_END
G1 E-.33211 F2100
G1 Z24 F720
G1 X146.063 Y103.708 F10800
G1 Z23.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z24 F720
G1 X104.032 Y103.532 F10800
G1 Z23.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.11283
G1 X107.366 Y104.63 E.03717
G1 X108.518 Y104.63 E.039
G1 X108.518 Y105.366 E.02491
G1 X107.366 Y105.366 E.039
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.972 Y103.532 E.01151
M204 S1000
G1 X103.348 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
M73 Q44 S26
G1 X104.568 Y103.125 E.04129
G1 X104.568 Y102.725 E.01354
G1 X105.325 Y102.725 E.02563
G1 X105.325 Y103.125 E.01354
G1 X106.003 Y103.125 E.02296
G1 X106.003 Y102.725 E.01354
G1 X106.405 Y102.725 E.01361
G1 X106.405 Y103.125 E.01354
G1 X107.773 Y103.125 E.04629
G1 X107.773 Y104.223 E.03717
G1 X108.925 Y104.223 E.039
G1 X108.925 Y105.773 E.05247
G1 X107.773 Y105.773 E.039
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.348 Y102.725 E.00416
G1 X103.348 Y103.065 E.01151
M204 S1000
G1 X103.388 Y103.523 F10800
;WIPE_START
G1 F8640
G1 X104.568 Y103.125 E-.28198
G1 X104.568 Y102.725 E-.09236
G1 X105.325 Y102.725 E-.17482
G1 X105.325 Y103.125 E-.09236
G1 X105.838 Y103.125 E-.11848
;WIPE_END
G1 E-.04 F2100
G1 Z24 F720
G1 X104.066 Y103.837 F10800
G1 Z23.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z24 F720
G1 X107.162 Y104.998 F10800
G1 Z23.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.314 Y104.998 E.0315
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:23.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;23.8



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.26606
;WIPE_END
G1 E-.53394 F2100
G1 Z24 F720
;AFTER_LAYER_CHANGE
;23.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z23.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X140.365 Y105.366 E.07666
G1 X140.365 Y104.63 E.02491
G1 X142.63 Y104.63 E.07666
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.958 Y105.773 E.07666
G1 X139.958 Y104.223 E.05247
G1 X142.223 Y104.223 E.07666
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.958 Y105.773 E-.52312
G1 X139.958 Y104.747 E-.23688
;WIPE_END
G1 E-.04 F2100
G1 Z24.2 F720
G1 X142.833 Y104.998 F10800
G1 Z23.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.569 Y104.998 E.06191
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.52294
;WIPE_END
G1 E-.27706 F2100
G1 Z24.2 F720
G1 X146.063 Y103.708 F10800
G1 Z23.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z24.2 F720
G1 X108.173 Y104.63 F10800
G1 Z23.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X108.719 Y104.63 E.01848
G1 X108.719 Y105.366 E.02491
G1 X107.366 Y105.366 E.0458
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.126 Y104.223 E.0458
G1 X109.126 Y105.773 E.05247
G1 X107.773 Y105.773 E.0458
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
M73 P45 R26
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.126 Y104.223 E-.31271
G1 X109.126 Y105.773 E-.3579
G1 X108.738 Y105.773 E-.08939
;WIPE_END
G1 E-.04 F2100
G1 Z24.2 F720
G1 X107.162 Y104.998 F10800
G1 Z23.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.515 Y104.998 E.03699
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.3124
;WIPE_END
G1 E-.4876 F2100
G1 Z24.2 F720
M73 Q45 S26
G1 X103.937 Y103.708 F10800
G1 Z23.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:24
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;24



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z24.2 F720
;AFTER_LAYER_CHANGE
;24
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z24 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X140.127 Y105.366 E.08473
G1 X140.127 Y104.63 E.02491
G1 X142.63 Y104.63 E.08473
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.719 Y105.773 E.08473
G1 X139.719 Y104.223 E.05247
G1 X142.223 Y104.223 E.08473
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.719 Y105.773 E-.57815
G1 X139.719 Y104.985 E-.18185
;WIPE_END
G1 E-.04 F2100
G1 Z24.4 F720
G1 X142.833 Y104.998 F10800
G1 Z24 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.33 Y104.998 E.06843
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.57798
;WIPE_END
G1 E-.22202 F2100
G1 Z24.4 F720
G1 X146.063 Y103.708 F10800
G1 Z24 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z24.4 F720
G1 X108.173 Y104.63 F10800
G1 Z24 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X108.944 Y104.63 E.0261
G1 X108.944 Y105.366 E.02491
G1 X107.366 Y105.366 E.05342
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.351 Y104.223 E.05342
G1 X109.351 Y105.773 E.05247
G1 X107.773 Y105.773 E.05342
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.351 Y104.223 E-.36466
G1 X109.351 Y105.773 E-.3579
G1 X109.189 Y105.773 E-.03744
;WIPE_END
G1 E-.04 F2100
G1 Z24.4 F720
G1 X107.162 Y104.998 F10800
G1 Z24 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.74 Y104.998 E.04314
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.36439
;WIPE_END
G1 E-.43561 F2100
G1 Z24.4 F720
G1 X103.937 Y103.708 F10800
G1 Z24 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:24.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;24.2



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z24.4 F720
;AFTER_LAYER_CHANGE
;24.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z24.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.888 Y105.366 E.0928
G1 X139.888 Y104.63 E.02491
G1 X142.63 Y104.63 E.0928
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.481 Y105.773 E.0928
G1 X139.481 Y104.223 E.05247
G1 X142.223 Y104.223 E.0928
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.481 Y105.773 E-.63318
G1 X139.481 Y105.224 E-.12682
;WIPE_END
G1 E-.04 F2100
G1 Z24.6 F720
G1 X142.833 Y104.998 F10800
G1 Z24.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.092 Y104.998 E.07495
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.63303
;WIPE_END
G1 E-.16697 F2100
G1 Z24.6 F720
G1 X146.063 Y103.708 F10800
G1 Z24.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z24.6 F720
G1 X108.173 Y104.63 F10800
G1 Z24.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.192 Y104.63 E.03451
G1 X109.192 Y105.366 E.02491
G1 X107.366 Y105.366 E.06183
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.599 Y104.223 E.06183
G1 X109.599 Y105.773 E.05247
G1 X107.773 Y105.773 E.06183
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
M73 P45 R25
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.599 Y104.223 E-.42202
G1 X109.599 Y105.687 E-.33798
;WIPE_END
G1 E-.04 F2100
G1 Z24.6 F720
G1 X107.162 Y104.998 F10800
G1 Z24.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.989 Y104.998 E.04994
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.42179
;WIPE_END
G1 E-.37821 F2100
G1 Z24.6 F720
G1 X103.937 Y103.708 F10800
G1 Z24.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:24.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;24.4



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z24.6 F720
;AFTER_LAYER_CHANGE
;24.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z24.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.65 Y105.366 E.10087
G1 X139.65 Y104.63 E.02491
G1 X142.63 Y104.63 E.10087
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.243 Y105.773 E.10087
G1 X139.243 Y104.223 E.05247
G1 X142.223 Y104.223 E.10087
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.243 Y105.773 E-.68822
G1 X139.243 Y105.462 E-.07178
;WIPE_END
G1 E-.04 F2100
G1 Z24.8 F720
G1 X142.833 Y104.998 F10800
G1 Z24.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.853 Y104.998 E.08146
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.68808
;WIPE_END
G1 E-.11192 F2100
G1 Z24.8 F720
G1 X146.063 Y103.708 F10800
G1 Z24.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
M73 P46 R25
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z24.8 F720
G1 X108.173 Y104.63 F10800
G1 Z24.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.472 Y104.63 E.04398
G1 X109.472 Y105.366 E.02491
G1 X107.366 Y105.366 E.0713
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
M73 Q46 S26
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.879 Y104.223 E.0713
G1 X109.879 Y105.773 E.05247
G1 X107.773 Y105.773 E.0713
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.879 Y104.223 E-.48654
G1 X109.879 Y105.407 E-.27346
;WIPE_END
G1 E-.04 F2100
G1 Z24.8 F720
G1 X107.162 Y104.998 F10800
G1 Z24.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.268 Y104.998 E.05758
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.48634
;WIPE_END
G1 E-.31366 F2100
G1 Z24.8 F720
G1 X103.937 Y103.708 F10800
G1 Z24.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:24.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;24.6



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z24.8 F720
;AFTER_LAYER_CHANGE
;24.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z24.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.411 Y105.366 E.10894
G1 X139.411 Y104.63 E.02491
G1 X142.63 Y104.63 E.10894
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.004 Y105.773 E.10894
G1 X139.004 Y104.223 E.05247
G1 X142.223 Y104.223 E.10894
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.004 Y105.773 E-.74325
G1 X139.004 Y105.7 E-.01675
;WIPE_END
G1 E-.04 F2100
G1 Z25 F720
G1 X142.833 Y104.998 F10800
G1 Z24.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.615 Y104.998 E.08798
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.74312
;WIPE_END
G1 E-.05688 F2100
G1 Z25 F720
G1 X146.063 Y103.708 F10800
G1 Z24.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z25 F720
G1 X108.173 Y104.63 F10800
G1 Z24.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.788 Y104.63 E.05468
G1 X109.788 Y105.366 E.02491
G1 X107.366 Y105.366 E.082
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X110.195 Y104.223 E.082
G1 X110.195 Y105.773 E.05247
G1 X107.773 Y105.773 E.082
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X110.195 Y104.223 E-.55952
G1 X110.195 Y105.091 E-.20048
;WIPE_END
G1 E-.04 F2100
G1 Z25 F720
G1 X107.162 Y104.998 F10800
G1 Z24.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.584 Y104.998 E.06622
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.55934
;WIPE_END
G1 E-.24066 F2100
G1 Z25 F720
G1 X103.937 Y103.708 F10800
G1 Z24.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:24.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;24.8



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z25 F720
;AFTER_LAYER_CHANGE
;24.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z24.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.173 Y105.366 E.11701
G1 X139.173 Y104.63 E.02491
G1 X142.63 Y104.63 E.11701
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X138.766 Y105.773 E.11701
G1 X138.766 Y104.223 E.05247
G1 X142.223 Y104.223 E.11701
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
M73 Q46 S25
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X138.932 Y105.776 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z25.2 F720
G1 X142.833 Y104.998 F10800
G1 Z24.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.377 Y104.998 E.0945
;WIPE_START
G1 F8640
G1 X142.668 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z25.2 F720
G1 X146.063 Y103.708 F10800
G1 Z24.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z25.2 F720
G1 X108.173 Y104.63 F10800
G1 Z24.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X110.161 Y104.63 E.06732
G1 X110.161 Y105.366 E.02491
G1 X107.366 Y105.366 E.09464
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X110.569 Y104.223 E.09464
G1 X110.569 Y105.773 E.05247
G1 X107.773 Y105.773 E.09464
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X110.569 Y104.223 E-.64572
G1 X110.569 Y104.718 E-.11428
;WIPE_END
G1 E-.04 F2100
G1 Z25.2 F720
G1 X107.162 Y104.998 F10800
G1 Z24.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.958 Y104.998 E.07643
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.64557
;WIPE_END
G1 E-.15443 F2100
G1 Z25.2 F720
G1 X103.937 Y103.708 F10800
G1 Z24.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:25
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;25



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z25.2 F720
;AFTER_LAYER_CHANGE
;25
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.373 Y105.366 F10800
G1 Z25 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F927
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X110.994 Y104.63 E.1228
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
M73 P47 R25
G1 X138.341 Y104.63 E.87939
;TYPE:Perimeter
;WIDTH:0.45
G1 F927
G1 X142.63 Y104.63 E.14517
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
M73 Q47 S25
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.366 E.05084
G1 X138.341 Y105.366 E.14517
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X110.994 Y105.366 E.87939
;TYPE:Perimeter
;WIDTH:0.45
G1 F927
G1 X107.433 Y105.366 E.12053
M204 S1000
G1 X107.773 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F927
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.223 E.05071
G1 X110.994 Y104.223 E.10902
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X138.341 Y104.223 E.87939
;TYPE:External perimeter
;WIDTH:0.45
G1 F927
G1 X142.223 Y104.223 E.13139
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X138.341 Y105.773 E.13139
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X110.994 Y105.773 E.87939
;TYPE:External perimeter
;WIDTH:0.45
G1 F927
G1 X107.833 Y105.773 E.10699
M204 S1000
;WIPE_START
G1 F8640
G1 X107.773 Y107.275 E-.34709
G1 X105.984 Y107.275 E-.41291
;WIPE_END
G1 E-.04 F2100
G1 Z25.4 F720
G1 X107.162 Y104.998 F10800
G1 Z25 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F927
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z25.4 F720
G1 X146.063 Y103.708 F10800
G1 Z25 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F927
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z25.4 F720
G1 X103.937 Y106.292 F10800
G1 Z25 F720
G1 E.8 F2100
G1 F927
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:25.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;25.2



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z25.4 F720
;AFTER_LAYER_CHANGE
;25.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z25.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F1087
G1 X142.63 Y104.63 E1.16633
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.366 E.05084
G1 X107.366 Y105.366 E1.19365
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F1087
G1 X142.223 Y104.223 E1.16609
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X107.773 Y105.773 E1.16609
G1 X107.773 Y107.275 E.05084
M73 P47 R24
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X111.064 Y104.169 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z25.6 F720
G1 X107.162 Y104.998 F10800
G1 Z25.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F1087
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z25.6 F720
G1 X146.063 Y103.708 F10800
M73 P48 R24
G1 Z25.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F1087
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z25.6 F720
G1 X103.937 Y106.292 F10800
G1 Z25.2 F720
G1 E.8 F2100
G1 F1087
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:25.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;25.4



 M104 S215 M109 S215 





;WIPE_START
M73 Q48 S25
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z25.6 F720
;AFTER_LAYER_CHANGE
;25.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z25.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F1087
G1 X142.63 Y104.63 E1.16633
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.366 E.05084
G1 X107.366 Y105.366 E1.19365
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F1087
G1 X142.223 Y104.223 E1.16609
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X107.773 Y105.773 E1.16609
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X111.064 Y104.169 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z25.8 F720
G1 X107.162 Y104.998 F10800
G1 Z25.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F1087
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z25.8 F720
G1 X146.063 Y103.708 F10800
G1 Z25.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F1087
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z25.8 F720
G1 X103.937 Y106.292 F10800
G1 Z25.4 F720
G1 E.8 F2100
G1 F1087
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:25.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;25.6



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z25.8 F720
;AFTER_LAYER_CHANGE
;25.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z25.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z26 F720
G1 X104.135 Y103.906 F10800
G1 Z25.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X104.135 Y103.635 E.00916
G1 X106.364 Y103.635 E.07546
G1 X106.863 Y104.134 E.02385
G1 X106.863 Y105.866 E.05866
G1 X106.368 Y106.361 E.02366
G1 X104.135 Y106.361 E.0756
G1 X104.135 Y106.094 E.00902
;WIPE_START
M73 Q48 S24
G1 F8640
G1 X104.135 Y106.361 E-.06155
G1 X106.368 Y106.361 E-.51571
G1 X106.863 Y105.866 E-.16137
G1 X106.863 Y105.774 E-.02138
;WIPE_END
G1 E-.04 F2100
G1 Z26 F720
G1 X142.832 Y106.266 F10800
G1 Z25.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.832 Y103.33 E.09937
G1 X146.166 Y103.33 E.11283
G1 X146.166 Y106.666 E.11291
G1 X142.832 Y106.666 E.11283
G1 X142.832 Y106.326 E.01151
M204 S1000
G1 X142.425 Y107.073 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.485 Y107.073 E.13836
M204 S1000
G1 X142.529 Y106.687 F10800
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z26 F720
G1 X145.86 Y106.089 F10800
G1 Z25.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X145.86 Y106.361 E.00918
G1 X143.632 Y106.361 E.07544
G1 X143.137 Y105.866 E.02365
G1 X143.137 Y104.134 E.05866
G1 X143.636 Y103.635 E.02385
G1 X145.86 Y103.635 E.0753
G1 X145.86 Y103.911 E.00932
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:25.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;25.8



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X145.86 Y103.635 E-.06356
G1 X143.636 Y103.635 E-.51369
G1 X143.137 Y104.134 E-.16267
G1 X143.137 Y104.22 E-.02007
;WIPE_END
G1 E-.04 F2100
G1 Z26 F720
;AFTER_LAYER_CHANGE
;25.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z25.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z26.2 F720
G1 X104.135 Y103.906 F10800
G1 Z25.8 F720
M73 P49 R24
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X104.135 Y103.635 E.00916
G1 X106.364 Y103.635 E.07546
G1 X106.863 Y104.134 E.02385
G1 X106.863 Y105.866 E.05866
G1 X106.368 Y106.361 E.02366
G1 X104.135 Y106.361 E.0756
G1 X104.135 Y106.094 E.00902
;WIPE_START
G1 F8640
G1 X104.135 Y106.361 E-.06155
G1 X106.368 Y106.361 E-.51571
G1 X106.863 Y105.866 E-.16137
G1 X106.863 Y105.774 E-.02138
;WIPE_END
G1 E-.04 F2100
G1 Z26.2 F720
G1 X142.832 Y106.266 F10800
G1 Z25.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.832 Y103.33 E.09937
G1 X146.166 Y103.33 E.11283
G1 X146.166 Y106.666 E.11291
G1 X142.832 Y106.666 E.11283
G1 X142.832 Y106.326 E.01151
M204 S1000
M73 Q49 S24
G1 X142.425 Y107.073 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.485 Y107.073 E.13836
M204 S1000
G1 X142.529 Y106.687 F10800
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z26.2 F720
G1 X145.86 Y106.089 F10800
G1 Z25.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X145.86 Y106.361 E.00918
G1 X143.632 Y106.361 E.07544
G1 X143.137 Y105.866 E.02365
G1 X143.137 Y104.134 E.05866
G1 X143.636 Y103.635 E.02385
G1 X145.86 Y103.635 E.0753
G1 X145.86 Y103.911 E.00932
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:26
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;26



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X145.86 Y103.635 E-.06356
G1 X143.636 Y103.635 E-.51369
G1 X143.137 Y104.134 E-.16267
G1 X143.137 Y104.22 E-.02007
;WIPE_END
G1 E-.04 F2100
G1 Z26.2 F720
;AFTER_LAYER_CHANGE
;26
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z26 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z26.4 F720
G1 X104.135 Y103.906 F10800
G1 Z26 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X104.135 Y103.635 E.00916
G1 X106.364 Y103.635 E.07546
G1 X106.863 Y104.134 E.02385
G1 X106.863 Y105.866 E.05866
G1 X106.368 Y106.361 E.02366
G1 X104.135 Y106.361 E.0756
G1 X104.135 Y106.094 E.00902
;WIPE_START
G1 F8640
G1 X104.135 Y106.361 E-.06155
G1 X106.368 Y106.361 E-.51571
G1 X106.863 Y105.866 E-.16137
G1 X106.863 Y105.774 E-.02138
;WIPE_END
G1 E-.04 F2100
G1 Z26.4 F720
G1 X142.832 Y106.266 F10800
G1 Z26 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.832 Y103.33 E.09937
G1 X146.166 Y103.33 E.11283
G1 X146.166 Y106.666 E.11291
G1 X142.832 Y106.666 E.11283
G1 X142.832 Y106.326 E.01151
M204 S1000
G1 X142.425 Y107.073 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.485 Y107.073 E.13836
M204 S1000
G1 X142.529 Y106.687 F10800
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z26.4 F720
G1 X145.86 Y106.089 F10800
G1 Z26 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X145.86 Y106.361 E.00918
G1 X143.632 Y106.361 E.07544
G1 X143.137 Y105.866 E.02365
G1 X143.137 Y104.134 E.05866
G1 X143.636 Y103.635 E.02385
G1 X145.86 Y103.635 E.0753
G1 X145.86 Y103.911 E.00932
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:26.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;26.2



 M104 S215 M109 S215 





;WIPE_START
G1 F8640
G1 X145.86 Y103.635 E-.06356
G1 X143.636 Y103.635 E-.51369
G1 X143.137 Y104.134 E-.16267
G1 X143.137 Y104.22 E-.02007
;WIPE_END
G1 E-.04 F2100
G1 Z26.4 F720
;AFTER_LAYER_CHANGE
;26.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z26.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z26.6 F720
G1 X146.063 Y103.708 F10800
G1 Z26.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z26.6 F720
G1 X106.966 Y106.868 F10800
G1 Z26.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z26.6 F720
G1 X103.937 Y106.292 F10800
G1 Z26.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:26.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;26.4




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z26.6 F720
;AFTER_LAYER_CHANGE
;26.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z26.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z26.8 F720
G1 X146.063 Y103.708 F10800
G1 Z26.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z26.8 F720
G1 X106.966 Y106.868 F10800
G1 Z26.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z26.8 F720
G1 X103.937 Y106.292 F10800
M73 P49 R23
G1 Z26.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:26.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;26.6




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z26.8 F720
;AFTER_LAYER_CHANGE
;26.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z26.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
M73 P50 R23
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z27 F720
G1 X146.063 Y103.708 F10800
G1 Z26.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
M73 Q50 S24
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z27 F720
G1 X106.966 Y106.868 F10800
G1 Z26.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z27 F720
G1 X103.937 Y106.292 F10800
G1 Z26.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:26.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;26.8




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z27 F720
;AFTER_LAYER_CHANGE
;26.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z26.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z27.2 F720
G1 X146.063 Y103.708 F10800
G1 Z26.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z27.2 F720
G1 X106.966 Y106.868 F10800
G1 Z26.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z27.2 F720
G1 X103.937 Y106.292 F10800
G1 Z26.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:27
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;27




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z27.2 F720
;AFTER_LAYER_CHANGE
;27
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z27 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z27.4 F720
G1 X146.063 Y103.708 F10800
G1 Z27 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z27.4 F720
G1 X106.966 Y106.868 F10800
G1 Z27 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z27.4 F720
G1 X103.937 Y106.292 F10800
G1 Z27 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:27.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;27.2




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z27.4 F720
;AFTER_LAYER_CHANGE
;27.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z27.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
M73 Q50 S23
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z27.6 F720
G1 X146.063 Y103.708 F10800
G1 Z27.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z27.6 F720
G1 X106.966 Y106.868 F10800
G1 Z27.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
M73 P51 R23
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z27.6 F720
G1 X103.937 Y106.292 F10800
G1 Z27.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:27.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;27.4




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z27.6 F720
;AFTER_LAYER_CHANGE
;27.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z27.4 F720
M73 Q51 S23
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z27.8 F720
G1 X146.063 Y103.708 F10800
G1 Z27.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z27.8 F720
G1 X106.966 Y106.868 F10800
G1 Z27.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z27.8 F720
G1 X103.937 Y106.292 F10800
G1 Z27.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:27.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;27.6




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z27.8 F720
;AFTER_LAYER_CHANGE
;27.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z27.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z28 F720
G1 X146.063 Y103.708 F10800
G1 Z27.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z28 F720
G1 X106.966 Y106.868 F10800
G1 Z27.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z28 F720
G1 X103.937 Y106.292 F10800
G1 Z27.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:27.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;27.8




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z28 F720
;AFTER_LAYER_CHANGE
;27.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z27.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z28.2 F720
G1 X146.063 Y103.708 F10800
G1 Z27.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z28.2 F720
G1 X106.966 Y106.868 F10800
G1 Z27.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z28.2 F720
G1 X103.937 Y106.292 F10800
G1 Z27.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:28
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;28




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z28.2 F720
;AFTER_LAYER_CHANGE
;28
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z28 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z28.4 F720
G1 X146.063 Y103.708 F10800
G1 Z28 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
M73 P52 R23
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
M73 P52 R22
G1 Z28.4 F720
G1 X105.719 Y103.532 F10800
G1 Z28 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.05574
G1 X107.366 Y106.868 E.11291
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X105.659 Y103.532 E.0686
M204 S1000
M73 Q52 S23
G1 X105.319 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X106.015 Y103.125 E.02356
G1 X106.015 Y102.725 E.01354
G1 X106.468 Y102.725 E.01533
G1 X106.468 Y103.125 E.01354
G1 X107.675 Y103.125 E.04086
G1 X107.675 Y102.725 E.01354
G1 X107.773 Y102.725 E.00332
G1 X107.773 Y107.275 E.15401
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X104.825 Y103.125 E.05416
G1 X104.825 Y102.725 E.01354
G1 X105.319 Y102.725 E.01671
G1 X105.319 Y103.065 E.01151
M204 S1000
G1 X105.436 Y103.508 F10800
G1 X105.072 Y102.929
;TYPE:Gap fill
;WIDTH:0.129546
G1 F900
G1 X105.072 Y103.329 E.00288
;WIPE_START
G1 F8640
G1 X105.072 Y102.929 E-.09236
;WIPE_END
G1 E-.70764 F2100
G1 Z28.4 F720
G1 X104.066 Y103.837 F10800
G1 Z28 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y105.669 E.04528
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:28.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;28.2




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z28.4 F720
;AFTER_LAYER_CHANGE
;28.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y106.468 F10800
G1 Z28.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.63 Y105.366 E.0373
G1 X142.508 Y105.366 E.00411
G1 X142.508 Y104.63 E.02491
G1 X142.63 Y104.63 E.00411
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y106.528 E.01151
M204 S1000
G1 X142.223 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.223 Y105.773 E.05084
G1 X142.101 Y105.773 E.00411
G1 X142.101 Y104.223 E.05247
G1 X142.223 Y104.223 E.00411
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.283 Y107.275 E.15206
M204 S1000
G1 X142.326 Y106.889 F10800
;WIPE_START
G1 F8640
G1 X142.223 Y105.773 E-.34709
G1 X142.101 Y105.773 E-.02804
G1 X142.101 Y104.223 E-.3579
G1 X142.218 Y104.223 E-.02696
;WIPE_END
G1 E-.04 F2100
G1 Z28.6 F720
G1 X142.773 Y105.162 F10800
G1 Z28.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.164362
G1 F900
G1 X142.773 Y104.834 E.00332
;WIPE_START
G1 F8640
G1 X142.773 Y105.162 E-.07591
;WIPE_END
G1 E-.72409 F2100
G1 Z28.6 F720
G1 X146.063 Y103.708 F10800
G1 Z28.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.528 E.00651
G1 X143.16 Y104.528 E.00762
G1 X143.16 Y105.468 E.0318
G1 X142.935 Y105.468 E.00762
G1 X142.935 Y105.664 E.00665
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z28.6 F720
G1 X105.719 Y103.532 F10800
G1 Z28.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.05574
G1 X107.366 Y104.63 E.03717
G1 X107.415 Y104.63 E.00167
G1 X107.415 Y105.366 E.02491
G1 X107.366 Y105.366 E.00167
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.297 Y103.532 E.02251
G1 X104.297 Y103.132 E.01354
G1 X104.912 Y103.132 E.0208
G1 X104.912 Y103.532 E.01354
G1 X105.659 Y103.532 E.02529
M204 S1000
G1 X105.319 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X106.015 Y103.125 E.02356
G1 X106.015 Y102.725 E.01354
G1 X106.325 Y102.725 E.01052
G1 X106.325 Y103.125 E.01354
G1 X107.036 Y103.125 E.02406
G1 X107.036 Y102.725 E.01354
G1 X107.103 Y102.725 E.00227
G1 X107.103 Y103.125 E.01354
G1 X107.773 Y103.125 E.02266
G1 X107.773 Y104.223 E.03717
G1 X107.822 Y104.223 E.00167
G1 X107.822 Y105.773 E.05247
G1 X107.773 Y105.773 E.00167
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X103.89 Y103.125 E.02251
G1 X103.89 Y102.725 E.01354
G1 X105.319 Y102.725 E.04836
G1 X105.319 Y103.065 E.01151
M204 S1000
G1 X105.486 Y103.488 F10800
G1 X104.602 Y103.573
;TYPE:Internal infill
G1 F900
G1 X104.606 Y103.437 E.0046
G1 X104.606 Y103.837 E.01354
G1 X106.566 Y103.837 E.06635
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.935 E.02045
G1 X107.11 Y104.935 E.00167
G1 X107.11 Y105.061 E.00424
G1 X107.06 Y105.061 E.00167
G1 X107.06 Y105.669 E.02059
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:28.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;28.4




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z28.6 F720
;AFTER_LAYER_CHANGE
;28.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z28.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.27 Y105.366 E.01218
G1 X142.27 Y104.63 E.02491
G1 X142.63 Y104.63 E.01218
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.863 Y105.773 E.01218
G1 X141.863 Y104.223 E.05247
G1 X142.223 Y104.223 E.01218
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.077 Y105.444 F10800
;WIPE_START
G1 F8640
G1 X141.863 Y105.773 E-.0842
G1 X141.863 Y104.223 E-.3579
G1 X142.223 Y104.223 E-.08305
G1 X142.223 Y103.206 E-.23484
;WIPE_END
G1 E-.04 F2100
G1 Z28.8 F720
G1 X146.063 Y106.292 F10800
G1 Z28.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y106.563 E.00917
G1 X143.834 Y106.563 E.07545
G1 X142.935 Y105.664 E.04301
G1 X142.935 Y105.596 E.00231
G1 X142.969 Y105.596 E.00114
G1 X143.288 Y105.276 E.0153
G1 X143.288 Y104.72 E.01885
G1 X142.969 Y104.4 E.0153
G1 X142.935 Y104.4 E.00114
G1 X142.935 Y104.336 E.00217
G1 X143.834 Y103.437 E.04301
G1 X146.063 Y103.437 E.07545
G1 X146.063 Y103.708 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y103.437 E-.06255
G1 X143.834 Y103.437 E-.5147
G1 X143.274 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z28.8 F720
G1 X104.032 Y103.532 F10800
G1 Z28.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X104.498 Y103.532 E.01579
G1 X104.498 Y103.132 E.01354
G1 X104.912 Y103.132 E.01398
G1 X104.912 Y103.532 E.01354
G1 X107.366 Y103.532 E.08306
G1 X107.366 Y104.63 E.03717
G1 X107.512 Y104.63 E.00494
G1 X107.512 Y105.366 E.02491
G1 X107.366 Y105.366 E.00494
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.972 Y103.532 E.01151
M204 S1000
G1 X103.303 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.091 Y103.125 E.02667
G1 X104.091 Y102.725 E.01354
G1 X105.319 Y102.725 E.04154
G1 X105.319 Y103.125 E.01354
G1 X106.015 Y103.125 E.02356
G1 X106.015 Y102.725 E.01354
G1 X106.244 Y102.725 E.00776
G1 X106.244 Y103.125 E.01354
G1 X106.946 Y103.125 E.02375
G1 X106.946 Y102.725 E.01354
G1 X107.194 Y102.725 E.0084
G1 X107.194 Y103.125 E.01354
G1 X107.773 Y103.125 E.0196
G1 X107.773 Y104.223 E.03717
G1 X107.919 Y104.223 E.00494
G1 X107.919 Y105.773 E.05247
G1 X107.773 Y105.773 E.00494
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.303 Y102.725 E.00265
G1 X103.303 Y103.065 E.01151
M204 S1000
G1 X103.329 Y103.524 F10800
;WIPE_START
G1 F8640
G1 X104.091 Y103.125 E-.18247
G1 X104.091 Y102.725 E-.09236
G1 X105.319 Y102.725 E-.28339
G1 X105.319 Y103.125 E-.09236
G1 X105.793 Y103.125 E-.10942
;WIPE_END
G1 E-.04 F2100
G1 Z28.8 F720
G1 X104.066 Y103.837 F10800
G1 Z28.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.528 E.00667
G1 X106.835 Y104.528 E.00762
G1 X106.835 Y105.468 E.0318
G1 X107.06 Y105.468 E.00762
G1 X107.06 Y105.669 E.00681
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z28.8 F720
G1 X107.235 Y105.162 F10800
G1 Z28.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.188968
G1 F900
G1 X107.235 Y104.834 E.00399
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:28.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;28.6




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X107.235 Y105.162 E-.07591
;WIPE_END
G1 E-.72409 F2100
G1 Z28.8 F720
;AFTER_LAYER_CHANGE
;28.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z28.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X142.032 Y105.366 E.02024
G1 X142.032 Y104.63 E.02491
G1 X142.63 Y104.63 E.02024
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.625 Y105.773 E.02024
G1 X141.625 Y104.223 E.05247
G1 X142.223 Y104.223 E.02024
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
M73 Q52 S22
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X141.625 Y105.773 E-.13876
G1 X141.625 Y104.223 E-.3579
G1 X142.223 Y104.223 E-.13806
G1 X142.223 Y103.68 E-.12528
;WIPE_END
G1 E-.04 F2100
G1 Z29 F720
G1 X142.688 Y104.752 F10800
G1 Z28.6 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.531415
G1 F900
G1 X143.064 Y105.129 E.02165
;WIPE_START
G1 F8640
G1 X142.688 Y104.752 E-.12306
;WIPE_END
G1 E-.67694 F2100
G1 Z29 F720
G1 X146.063 Y106.292 F10800
G1 Z28.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y106.563 E.00917
G1 X143.834 Y106.563 E.07545
G1 X142.935 Y105.664 E.04301
G1 X142.935 Y105.596 E.00231
G1 X142.969 Y105.596 E.00114
G1 X143.288 Y105.276 E.0153
G1 X143.288 Y104.72 E.01885
G1 X142.969 Y104.4 E.0153
G1 X142.935 Y104.4 E.00114
G1 X142.935 Y104.336 E.00217
G1 X143.834 Y103.437 E.04301
G1 X146.063 Y103.437 E.07545
G1 X146.063 Y103.708 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y103.437 E-.06256
G1 X143.834 Y103.437 E-.5147
G1 X143.274 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z29 F720
G1 X104.032 Y103.532 F10800
G1 Z28.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X104.733 Y103.532 E.02374
G1 X104.733 Y103.132 E.01354
G1 X104.912 Y103.132 E.00603
G1 X104.912 Y103.532 E.01354
G1 X107.366 Y103.532 E.08306
G1 X107.366 Y104.63 E.03717
G1 X107.623 Y104.63 E.0087
G1 X107.623 Y105.366 E.02491
G1 X107.366 Y105.366 E.0087
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.972 Y103.532 E.01151
M204 S1000
G1 X103.519 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.326 Y103.125 E.02732
G1 X104.326 Y102.725 E.01354
G1 X105.319 Y102.725 E.03359
G1 X105.319 Y103.125 E.01354
G1 X106.015 Y103.125 E.02356
G1 X106.015 Y102.725 E.01354
G1 X106.206 Y102.725 E.00646
G1 X106.206 Y103.125 E.01354
G1 X106.905 Y103.125 E.02368
G1 X106.905 Y102.725 E.01354
G1 X107.234 Y102.725 E.01112
G1 X107.234 Y103.125 E.01354
G1 X107.773 Y103.125 E.01824
G1 X107.773 Y104.223 E.03717
G1 X108.03 Y104.223 E.0087
G1 X108.03 Y105.773 E.05247
G1 X107.773 Y105.773 E.0087
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
M73 P53 R22
G1 X103.225 Y102.725 E.15401
G1 X103.519 Y102.725 E.00996
G1 X103.519 Y103.065 E.01151
M204 S1000
G1 X103.603 Y103.516 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:28.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;28.8




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z29 F720
;AFTER_LAYER_CHANGE
;28.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z28.8 F720
M73 Q53 S22
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X141.794 Y105.366 E.0283
G1 X141.794 Y104.63 E.02491
G1 X142.63 Y104.63 E.0283
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.386 Y105.773 E.0283
G1 X141.386 Y104.223 E.05247
G1 X142.223 Y104.223 E.0283
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
G1 X141.997 Y104.998
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X142.833 Y104.998 E.02286
;WIPE_START
G1 F8640
G1 X141.997 Y104.998 E-.19307
;WIPE_END
G1 E-.60693 F2100
G1 Z29.2 F720
G1 X146.063 Y103.708 F10800
G1 Z28.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z29.2 F720
G1 X104.154 Y103.532 F10800
G1 Z28.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.1087
G1 X107.366 Y104.63 E.03717
G1 X107.742 Y104.63 E.01274
G1 X107.742 Y105.366 E.02491
G1 X107.366 Y105.366 E.01274
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.094 Y103.532 E.01564
M204 S1000
G1 X103.754 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.54 Y103.125 E.02661
G1 X104.54 Y102.725 E.01354
G1 X105.319 Y102.725 E.02635
G1 X105.319 Y103.125 E.01354
G1 X106.015 Y103.125 E.02356
G1 X106.015 Y102.725 E.01354
G1 X106.195 Y102.725 E.00611
G1 X106.195 Y103.125 E.01354
G1 X106.896 Y103.125 E.02371
G1 X106.896 Y102.725 E.01354
G1 X107.245 Y102.725 E.01181
G1 X107.245 Y103.125 E.01354
G1 X107.773 Y103.125 E.01787
G1 X107.773 Y104.223 E.03717
G1 X108.149 Y104.223 E.01274
G1 X108.149 Y105.773 E.05247
G1 X107.773 Y105.773 E.01274
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.754 Y102.725 E.01791
G1 X103.754 Y103.065 E.01151
M204 S1000
G1 X103.875 Y103.506 F10800
G1 X103.49 Y102.929
;TYPE:Gap fill
;WIDTH:0.165034
G1 F900
G1 X103.49 Y103.329 E.00406
G1 X104.066 Y103.837 F10800
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:29
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;29




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z29.2 F720
;AFTER_LAYER_CHANGE
;29
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z29 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X141.555 Y105.366 E.03637
G1 X141.555 Y104.63 E.02491
G1 X142.63 Y104.63 E.03637
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.148 Y105.773 E.03637
G1 X141.148 Y104.223 E.05247
G1 X142.223 Y104.223 E.03637
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
G1 X141.759 Y104.998
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X142.833 Y104.998 E.02937
;WIPE_START
G1 F8640
G1 X141.759 Y104.998 E-.24808
;WIPE_END
G1 E-.55192 F2100
G1 Z29.4 F720
G1 X146.063 Y103.708 F10800
G1 Z29 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z29.4 F720
G1 X104.351 Y103.532 F10800
G1 Z29 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.10205
G1 X107.366 Y104.63 E.03717
G1 X107.87 Y104.63 E.01708
G1 X107.87 Y105.366 E.02491
G1 X107.366 Y105.366 E.01708
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.291 Y103.532 E.02229
M204 S1000
G1 X103.951 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.709 Y103.125 E.02566
G1 X104.709 Y102.725 E.01354
G1 X105.319 Y102.725 E.02065
G1 X105.319 Y103.125 E.01354
G1 X106.015 Y103.125 E.02356
G1 X106.015 Y102.725 E.01354
G1 X106.194 Y102.725 E.00608
G1 X106.194 Y103.125 E.01354
G1 X106.896 Y103.125 E.02375
G1 X106.896 Y102.725 E.01354
G1 X107.245 Y102.725 E.0118
G1 X107.245 Y103.125 E.01354
G1 X107.773 Y103.125 E.01787
G1 X107.773 Y104.223 E.03717
G1 X108.277 Y104.223 E.01708
G1 X108.277 Y105.773 E.05247
G1 X107.773 Y105.773 E.01708
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.951 Y102.725 E.02456
G1 X103.951 Y103.065 E.01151
M204 S1000
G1 X104.09 Y103.5 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:29.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;29.2




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z29.4 F720
;AFTER_LAYER_CHANGE
;29.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z29.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X141.317 Y105.366 E.04443
G1 X141.317 Y104.63 E.02491
G1 X142.63 Y104.63 E.04443
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.91 Y105.773 E.04443
G1 X140.91 Y104.223 E.05247
G1 X142.223 Y104.223 E.04443
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.91 Y105.773 E-.30341
G1 X140.91 Y104.223 E-.3579
G1 X141.337 Y104.223 E-.09869
;WIPE_END
G1 E-.04 F2100
G1 Z29.6 F720
G1 X142.833 Y104.998 F10800
G1 Z29.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X141.521 Y104.998 E.03588
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.30309
;WIPE_END
G1 E-.49691 F2100
G1 Z29.6 F720
G1 X146.063 Y103.708 F10800
G1 Z29.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z29.6 F720
G1 X104.487 Y103.532 F10800
G1 Z29.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.09744
G1 X107.366 Y104.63 E.03717
G1 X108.011 Y104.63 E.02186
G1 X108.011 Y105.366 E.02491
G1 X107.366 Y105.366 E.02186
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X103.68 Y103.132 E.00161
G1 X103.68 Y103.532 E.01354
G1 X104.427 Y103.532 E.02529
M204 S1000
G1 X104.087 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.802 Y103.125 E.02421
G1 X104.802 Y102.725 E.01354
G1 X105.319 Y102.725 E.01749
G1 X105.319 Y103.125 E.01354
G1 X106.015 Y103.125 E.02356
G1 X106.015 Y102.725 E.01354
G1 X106.211 Y102.725 E.00665
G1 X106.211 Y103.125 E.01354
G1 X106.91 Y103.125 E.02364
G1 X106.91 Y102.725 E.01354
G1 X107.231 Y102.725 E.01087
G1 X107.231 Y103.125 E.01354
G1 X107.773 Y103.125 E.01833
G1 X107.773 Y104.223 E.03717
G1 X108.418 Y104.223 E.02186
G1 X108.418 Y105.773 E.05247
G1 X107.773 Y105.773 E.02186
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X104.087 Y102.725 E.02917
G1 X104.087 Y103.065 E.01151
M204 S1000
G1 X104.235 Y103.497 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X106.728 Y104.72 E.01559
G1 X106.728 Y105.276 E.01885
G1 X107.06 Y105.596 E.01559
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z29.6 F720
G1 X105.06 Y103.329 F10800
G1 Z29.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.152616
G1 F900
G1 X105.06 Y102.929 E.00365
;WIPE_START
G1 F8640
G1 X105.06 Y103.329 E-.09236
;WIPE_END
G1 E-.70764 F2100
G1 Z29.6 F720
G1 X107.385 Y104.752 F10800
G1 Z29.2 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.531415
G1 F900
G1 X106.953 Y105.184 E.02482
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:29.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;29.4




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X107.385 Y104.752 E-.14111
;WIPE_END
G1 E-.65889 F2100
G1 Z29.6 F720
;AFTER_LAYER_CHANGE
;29.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z29.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X141.079 Y105.366 E.0525
G1 X141.079 Y104.63 E.02491
G1 X142.63 Y104.63 E.0525
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
M73 P54 R22
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.672 Y105.773 E.0525
G1 X140.672 Y104.223 E.05247
G1 X142.223 Y104.223 E.0525
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
M73 Q54 S22
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.672 Y105.773 E-.35837
G1 X140.672 Y104.223 E-.3579
G1 X140.861 Y104.223 E-.04373
;WIPE_END
G1 E-.04 F2100
G1 Z29.8 F720
G1 X142.833 Y104.998 F10800
G1 Z29.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
M73 P54 R21
G1 F900
G1 X141.282 Y104.998 E.0424
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.3581
;WIPE_END
G1 E-.4419 F2100
G1 Z29.8 F720
G1 X146.063 Y103.708 F10800
G1 Z29.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z29.8 F720
G1 X104.516 Y103.532 F10800
G1 Z29.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.09646
G1 X107.366 Y104.63 E.03717
G1 X108.167 Y104.63 E.02713
G1 X108.167 Y105.366 E.02491
G1 X107.366 Y105.366 E.02713
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.456 Y103.532 E.02788
M204 S1000
G1 X104.116 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.818 Y103.125 E.02375
G1 X104.818 Y102.725 E.01354
G1 X104.827 Y103.125 E.01354
G1 X106.015 Y103.125 E.04021
G1 X106.015 Y102.725 E.01354
G1 X106.251 Y102.725 E.008
G1 X106.251 Y103.125 E.01354
G1 X106.958 Y103.125 E.02391
G1 X106.958 Y102.725 E.01354
G1 X107.184 Y102.725 E.00768
G1 X107.184 Y103.125 E.01354
G1 X107.773 Y103.125 E.01991
G1 X107.773 Y104.223 E.03717
G1 X108.574 Y104.223 E.02713
G1 X108.574 Y105.773 E.05247
G1 X107.773 Y105.773 E.02713
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X103.812 Y103.125 E.01987
G1 X103.812 Y102.725 E.01354
G1 X104.116 Y102.725 E.01028
G1 X104.116 Y103.065 E.01151
M204 S1000
G1 X104.202 Y103.516 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z29.8 F720
G1 X107.162 Y104.998 F10800
G1 Z29.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X107.964 Y104.998 E.02191
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:29.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;29.6




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.18506
;WIPE_END
G1 E-.61494 F2100
G1 Z29.8 F720
;AFTER_LAYER_CHANGE
;29.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z29.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X140.841 Y105.366 E.06056
G1 X140.841 Y104.63 E.02491
G1 X142.63 Y104.63 E.06056
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.434 Y105.773 E.06056
G1 X140.434 Y104.223 E.05247
G1 X142.223 Y104.223 E.06056
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.434 Y105.773 E-.41335
G1 X140.434 Y104.272 E-.34665
;WIPE_END
G1 E-.04 F2100
G1 Z30 F720
G1 X142.833 Y104.998 F10800
G1 Z29.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X141.044 Y104.998 E.04891
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.41311
;WIPE_END
G1 E-.38689 F2100
G1 Z30 F720
G1 X146.063 Y103.708 F10800
G1 Z29.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z30 F720
G1 X104.42 Y103.532 F10800
G1 Z29.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.09971
G1 X107.366 Y104.63 E.03717
G1 X108.335 Y104.63 E.03283
G1 X108.335 Y105.366 E.02491
G1 X107.366 Y105.366 E.03283
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.36 Y103.532 E.02464
M204 S1000
G1 X104.02 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.765 Y103.125 E.02522
G1 X104.765 Y102.725 E.01354
G1 X105.137 Y102.725 E.0126
G1 X105.137 Y103.125 E.01354
G1 X106.015 Y103.125 E.0297
G1 X106.015 Y102.725 E.01354
G1 X106.33 Y102.725 E.01068
G1 X106.33 Y103.125 E.01354
G1 X107.059 Y103.125 E.02466
G1 X107.059 Y102.725 E.01354
G1 X107.078 Y102.725 E.00064
G1 X107.078 Y103.125 E.01354
G1 X107.773 Y103.125 E.02352
G1 X107.773 Y104.223 E.03717
G1 X108.742 Y104.223 E.03283
G1 X108.742 Y105.773 E.05247
G1 X107.773 Y105.773 E.03283
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X103.913 Y103.125 E.0233
G1 X103.913 Y102.725 E.01354
G1 X104.02 Y102.725 E.00361
G1 X104.02 Y103.065 E.01151
M204 S1000
G1 X104.055 Y103.523 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z30 F720
G1 X107.162 Y104.998 F10800
G1 Z29.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.132 Y104.998 E.02651
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:29.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;29.8




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.22392
;WIPE_END
G1 E-.57608 F2100
G1 Z30 F720
;AFTER_LAYER_CHANGE
;29.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z29.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X140.602 Y105.366 E.06862
G1 X140.602 Y104.63 E.02491
G1 X142.63 Y104.63 E.06862
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.195 Y105.773 E.06862
G1 X140.195 Y104.223 E.05247
G1 X142.223 Y104.223 E.06862
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.195 Y105.773 E-.46833
G1 X140.195 Y104.51 E-.29167
;WIPE_END
G1 E-.04 F2100
G1 Z30.2 F720
G1 X142.833 Y104.998 F10800
G1 Z29.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.806 Y104.998 E.05542
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.46812
;WIPE_END
G1 E-.33188 F2100
G1 Z30.2 F720
G1 X146.063 Y103.708 F10800
G1 Z29.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z30.2 F720
G1 X104.032 Y103.532 F10800
G1 Z29.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.11283
G1 X107.366 Y104.63 E.03717
G1 X108.518 Y104.63 E.039
G1 X108.518 Y105.366 E.02491
G1 X107.366 Y105.366 E.039
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.972 Y103.532 E.01151
M204 S1000
G1 X103.359 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.579 Y103.125 E.0413
G1 X104.579 Y102.725 E.01354
G1 X105.336 Y102.725 E.0256
G1 X105.336 Y103.125 E.01354
G1 X106.015 Y103.125 E.02299
G1 X106.015 Y102.725 E.01354
G1 X106.499 Y102.725 E.01638
G1 X106.499 Y103.125 E.01354
G1 X107.64 Y103.125 E.03863
G1 X107.64 Y102.725 E.01354
G1 X107.773 Y102.725 E.00449
M73 Q54 S21
G1 X107.773 Y104.223 E.05071
G1 X108.925 Y104.223 E.039
G1 X108.925 Y105.773 E.05247
G1 X107.773 Y105.773 E.039
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.359 Y102.725 E.00454
G1 X103.359 Y103.065 E.01151
M204 S1000
G1 X103.402 Y103.523 F10800
;WIPE_START
G1 F8640
G1 X104.579 Y103.125 E-.28207
G1 X104.579 Y102.725 E-.09236
G1 X105.336 Y102.725 E-.17462
G1 X105.336 Y103.125 E-.09236
G1 X105.849 Y103.125 E-.11858
;WIPE_END
G1 E-.04 F2100
G1 Z30.2 F720
G1 X104.066 Y103.837 F10800
G1 Z29.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z30.2 F720
G1 X106.257 Y102.929 F10800
G1 Z29.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.119824
G1 F900
G1 X106.257 Y103.329 E.00256
;WIPE_START
G1 F8640
G1 X106.257 Y102.929 E-.09236
;WIPE_END
G1 E-.70764 F2100
G1 Z30.2 F720
G1 X107.162 Y104.998 F10800
G1 Z29.8 F720
G1 E.8 F2100
;WIDTH:0.371688
G1 F900
G1 X108.314 Y104.998 E.0315
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:30
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;30




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.26606
;WIPE_END
G1 E-.53394 F2100
G1 Z30.2 F720
;AFTER_LAYER_CHANGE
;30
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
M73 P55 R21
G1 Z30 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X140.364 Y105.366 E.07669
G1 X140.364 Y104.63 E.02491
G1 X142.63 Y104.63 E.07669
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
M73 Q55 S21
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.957 Y105.773 E.07669
G1 X139.957 Y104.223 E.05247
G1 X142.223 Y104.223 E.07669
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.957 Y105.773 E-.52332
G1 X139.957 Y104.748 E-.23668
;WIPE_END
G1 E-.04 F2100
G1 Z30.4 F720
G1 X142.833 Y104.998 F10800
G1 Z30 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.568 Y104.998 E.06194
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.52313
;WIPE_END
G1 E-.27687 F2100
G1 Z30.4 F720
G1 X146.063 Y103.708 F10800
G1 Z30 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z30.4 F720
G1 X108.173 Y104.63 F10800
G1 Z30 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X108.719 Y104.63 E.01848
G1 X108.719 Y105.366 E.02491
G1 X107.366 Y105.366 E.0458
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.126 Y104.223 E.0458
G1 X109.126 Y105.773 E.05247
G1 X107.773 Y105.773 E.0458
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.126 Y104.223 E-.31271
G1 X109.126 Y105.773 E-.3579
G1 X108.738 Y105.773 E-.08939
;WIPE_END
G1 E-.04 F2100
G1 Z30.4 F720
G1 X107.162 Y104.998 F10800
G1 Z30 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.515 Y104.998 E.03699
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.3124
;WIPE_END
G1 E-.4876 F2100
G1 Z30.4 F720
G1 X103.937 Y103.708 F10800
G1 Z30 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:30.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;30.2




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z30.4 F720
;AFTER_LAYER_CHANGE
;30.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z30.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X140.126 Y105.366 E.08475
G1 X140.126 Y104.63 E.02491
G1 X142.63 Y104.63 E.08475
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.719 Y105.773 E.08475
G1 X139.719 Y104.223 E.05247
G1 X142.223 Y104.223 E.08475
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.719 Y105.773 E-.57831
G1 X139.719 Y104.986 E-.18169
;WIPE_END
G1 E-.04 F2100
G1 Z30.6 F720
G1 X142.833 Y104.998 F10800
G1 Z30.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.329 Y104.998 E.06845
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.57814
;WIPE_END
G1 E-.22186 F2100
G1 Z30.6 F720
G1 X146.063 Y103.708 F10800
G1 Z30.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z30.6 F720
G1 X108.173 Y104.63 F10800
G1 Z30.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X108.944 Y104.63 E.0261
G1 X108.944 Y105.366 E.02491
G1 X107.366 Y105.366 E.05342
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.351 Y104.223 E.05342
G1 X109.351 Y105.773 E.05247
G1 X107.773 Y105.773 E.05342
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.351 Y104.223 E-.36466
G1 X109.351 Y105.773 E-.3579
G1 X109.189 Y105.773 E-.03744
;WIPE_END
G1 E-.04 F2100
G1 Z30.6 F720
G1 X107.162 Y104.998 F10800
G1 Z30.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.74 Y104.998 E.04314
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.36439
;WIPE_END
G1 E-.43561 F2100
G1 Z30.6 F720
G1 X103.937 Y103.708 F10800
G1 Z30.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:30.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;30.4




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z30.6 F720
;AFTER_LAYER_CHANGE
;30.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z30.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.888 Y105.366 E.09282
G1 X139.888 Y104.63 E.02491
G1 X142.63 Y104.63 E.09282
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.481 Y105.773 E.09282
G1 X139.481 Y104.223 E.05247
G1 X142.223 Y104.223 E.09282
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.481 Y105.773 E-.63331
G1 X139.481 Y105.224 E-.12669
;WIPE_END
G1 E-.04 F2100
G1 Z30.8 F720
G1 X142.833 Y104.998 F10800
G1 Z30.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.091 Y104.998 E.07496
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.63315
;WIPE_END
G1 E-.16685 F2100
G1 Z30.8 F720
G1 X146.063 Y103.708 F10800
G1 Z30.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z30.8 F720
G1 X108.173 Y104.63 F10800
G1 Z30.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.192 Y104.63 E.03451
G1 X109.192 Y105.366 E.02491
G1 X107.366 Y105.366 E.06183
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.599 Y104.223 E.06183
G1 X109.599 Y105.773 E.05247
G1 X107.773 Y105.773 E.06183
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
M73 P56 R21
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.599 Y104.223 E-.42202
G1 X109.599 Y105.687 E-.33798
;WIPE_END
G1 E-.04 F2100
G1 Z30.8 F720
G1 X107.162 Y104.998 F10800
G1 Z30.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.989 Y104.998 E.04994
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.42179
;WIPE_END
G1 E-.37821 F2100
G1 Z30.8 F720
G1 X103.937 Y103.708 F10800
G1 Z30.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
M73 Q56 S21
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:30.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;30.6




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z30.8 F720
;AFTER_LAYER_CHANGE
;30.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z30.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.649 Y105.366 E.10088
G1 X139.649 Y104.63 E.02491
G1 X142.63 Y104.63 E.10088
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.242 Y105.773 E.10088
G1 X139.242 Y104.223 E.05247
G1 X142.223 Y104.223 E.10088
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
M73 P56 R20
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.242 Y105.773 E-.68831
G1 X139.242 Y105.463 E-.07169
;WIPE_END
G1 E-.04 F2100
G1 Z31 F720
G1 X142.833 Y104.998 F10800
G1 Z30.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.853 Y104.998 E.08147
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.68817
;WIPE_END
G1 E-.11183 F2100
G1 Z31 F720
G1 X146.063 Y103.708 F10800
G1 Z30.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z31 F720
G1 X108.173 Y104.63 F10800
G1 Z30.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.472 Y104.63 E.04398
G1 X109.472 Y105.366 E.02491
G1 X107.366 Y105.366 E.0713
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.879 Y104.223 E.0713
G1 X109.879 Y105.773 E.05247
G1 X107.773 Y105.773 E.0713
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.879 Y104.223 E-.48654
G1 X109.879 Y105.407 E-.27346
;WIPE_END
G1 E-.04 F2100
G1 Z31 F720
G1 X107.162 Y104.998 F10800
G1 Z30.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.268 Y104.998 E.05758
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.48634
;WIPE_END
G1 E-.31366 F2100
G1 Z31 F720
G1 X103.937 Y103.708 F10800
G1 Z30.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:30.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;30.8




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z31 F720
;AFTER_LAYER_CHANGE
;30.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z30.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.411 Y105.366 E.10895
G1 X139.411 Y104.63 E.02491
G1 X142.63 Y104.63 E.10894
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.004 Y105.773 E.10894
G1 X139.004 Y104.223 E.05247
G1 X142.223 Y104.223 E.10894
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.004 Y105.773 E-.74331
G1 X139.004 Y105.701 E-.01669
;WIPE_END
G1 E-.04 F2100
G1 Z31.2 F720
G1 X142.833 Y104.998 F10800
G1 Z30.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.615 Y104.998 E.08799
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.74318
;WIPE_END
G1 E-.05682 F2100
G1 Z31.2 F720
G1 X146.063 Y103.708 F10800
G1 Z30.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z31.2 F720
G1 X108.173 Y104.63 F10800
G1 Z30.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.788 Y104.63 E.05468
G1 X109.788 Y105.366 E.02491
G1 X107.366 Y105.366 E.082
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X110.195 Y104.223 E.082
G1 X110.195 Y105.773 E.05247
G1 X107.773 Y105.773 E.082
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X110.195 Y104.223 E-.55952
G1 X110.195 Y105.091 E-.20048
;WIPE_END
G1 E-.04 F2100
G1 Z31.2 F720
G1 X107.162 Y104.998 F10800
G1 Z30.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.584 Y104.998 E.06622
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.55934
;WIPE_END
G1 E-.24066 F2100
G1 Z31.2 F720
G1 X103.937 Y103.708 F10800
G1 Z30.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:31
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;31




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z31.2 F720
;AFTER_LAYER_CHANGE
;31
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z31 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.173 Y105.366 E.11701
G1 X139.173 Y104.63 E.02491
G1 X142.63 Y104.63 E.11701
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X138.766 Y105.773 E.11701
G1 X138.766 Y104.223 E.05247
G1 X142.223 Y104.223 E.11701
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
M73 Q56 S20
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X138.932 Y105.776 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z31.4 F720
G1 X142.833 Y104.998 F10800
G1 Z31 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.376 Y104.998 E.0945
;WIPE_START
G1 F8640
G1 X142.668 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z31.4 F720
G1 X146.063 Y103.708 F10800
G1 Z31 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
M73 P57 R20
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z31.4 F720
G1 X108.173 Y104.63 F10800
G1 Z31 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X110.161 Y104.63 E.06732
G1 X110.161 Y105.366 E.02491
G1 X107.366 Y105.366 E.09464
M73 Q57 S20
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X110.569 Y104.223 E.09464
G1 X110.569 Y105.773 E.05247
G1 X107.773 Y105.773 E.09464
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X110.569 Y104.223 E-.64572
G1 X110.569 Y104.718 E-.11428
;WIPE_END
G1 E-.04 F2100
G1 Z31.4 F720
G1 X107.162 Y104.998 F10800
G1 Z31 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.958 Y104.998 E.07643
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.64557
;WIPE_END
G1 E-.15443 F2100
G1 Z31.4 F720
G1 X103.937 Y103.708 F10800
G1 Z31 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:31.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;31.2




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z31.4 F720
;AFTER_LAYER_CHANGE
;31.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.373 Y105.366 F10800
G1 Z31.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F927
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X110.994 Y104.63 E.1228
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X138.341 Y104.63 E.87939
;TYPE:Perimeter
;WIDTH:0.45
G1 F927
G1 X142.63 Y104.63 E.14517
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.366 E.05084
G1 X138.341 Y105.366 E.14517
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X110.994 Y105.366 E.87939
;TYPE:Perimeter
;WIDTH:0.45
G1 F927
G1 X107.433 Y105.366 E.12053
M204 S1000
G1 X107.773 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F927
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.223 E.05071
G1 X110.994 Y104.223 E.10902
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X138.341 Y104.223 E.87939
;TYPE:External perimeter
;WIDTH:0.45
G1 F927
G1 X142.223 Y104.223 E.13139
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X138.341 Y105.773 E.13139
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X110.994 Y105.773 E.87939
;TYPE:External perimeter
;WIDTH:0.45
G1 F927
G1 X107.833 Y105.773 E.10699
M204 S1000
;WIPE_START
G1 F8640
G1 X107.773 Y107.275 E-.34709
G1 X105.984 Y107.275 E-.41291
;WIPE_END
G1 E-.04 F2100
G1 Z31.6 F720
G1 X107.162 Y104.998 F10800
G1 Z31.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F927
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z31.6 F720
G1 X146.063 Y103.708 F10800
G1 Z31.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F927
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z31.6 F720
G1 X103.937 Y106.292 F10800
G1 Z31.2 F720
G1 E.8 F2100
G1 F927
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:31.4
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;31.4




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z31.6 F720
;AFTER_LAYER_CHANGE
;31.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z31.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F1087
G1 X142.63 Y104.63 E1.16633
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.366 E.05084
G1 X107.366 Y105.366 E1.19365
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F1087
G1 X142.223 Y104.223 E1.16609
G1 X142.223 Y102.725 E.05071
M73 P58 R20
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
M73 Q58 S20
G1 X107.773 Y105.773 E1.16609
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X111.064 Y104.169 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z31.8 F720
G1 X107.162 Y104.998 F10800
G1 Z31.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F1087
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z31.8 F720
G1 X146.063 Y103.708 F10800
G1 Z31.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F1087
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
M73 P58 R19
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z31.8 F720
G1 X103.937 Y106.292 F10800
G1 Z31.4 F720
G1 E.8 F2100
G1 F1087
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:31.6
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;31.6




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z31.8 F720
;AFTER_LAYER_CHANGE
;31.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z31.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F1087
G1 X142.63 Y104.63 E1.16633
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.366 E.05084
G1 X107.366 Y105.366 E1.19365
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F1087
G1 X142.223 Y104.223 E1.16609
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X107.773 Y105.773 E1.16609
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X111.064 Y104.169 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z32 F720
G1 X107.162 Y104.998 F10800
G1 Z31.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F1087
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z32 F720
G1 X146.063 Y103.708 F10800
G1 Z31.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F1087
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z32 F720
G1 X103.937 Y106.292 F10800
G1 Z31.6 F720
G1 E.8 F2100
G1 F1087
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:31.8
;HEIGHT:0.199999
;BEFORE_LAYER_CHANGE
G92 E0.0
;31.8




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z32 F720
;AFTER_LAYER_CHANGE
;31.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z31.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z32.2 F720
G1 X104.135 Y103.906 F10800
G1 Z31.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X104.135 Y103.635 E.00916
G1 X106.364 Y103.635 E.07546
G1 X106.863 Y104.134 E.02385
M73 P59 R19
G1 X106.863 Y105.866 E.05866
G1 X106.368 Y106.361 E.02366
G1 X104.135 Y106.361 E.0756
G1 X104.135 Y106.094 E.00902
;WIPE_START
M73 Q58 S19
G1 F8640
G1 X104.135 Y106.361 E-.06155
G1 X106.368 Y106.361 E-.51571
G1 X106.863 Y105.866 E-.16137
G1 X106.863 Y105.774 E-.02138
;WIPE_END
G1 E-.04 F2100
G1 Z32.2 F720
G1 X142.832 Y106.266 F10800
G1 Z31.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.832 Y103.33 E.09937
G1 X146.166 Y103.33 E.11283
G1 X146.166 Y106.666 E.11291
G1 X142.832 Y106.666 E.11283
M73 Q59 S19
G1 X142.832 Y106.326 E.01151
M204 S1000
G1 X142.425 Y107.073 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.485 Y107.073 E.13836
M204 S1000
G1 X142.529 Y106.687 F10800
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z32.2 F720
G1 X145.86 Y106.089 F10800
G1 Z31.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X145.86 Y106.361 E.00918
G1 X143.632 Y106.361 E.07544
G1 X143.137 Y105.866 E.02365
G1 X143.137 Y104.134 E.05866
G1 X143.636 Y103.635 E.02385
G1 X145.86 Y103.635 E.0753
G1 X145.86 Y103.911 E.00932
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:32
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;32




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X145.86 Y103.635 E-.06356
G1 X143.636 Y103.635 E-.51369
G1 X143.137 Y104.134 E-.16267
G1 X143.137 Y104.22 E-.02007
;WIPE_END
G1 E-.04 F2100
G1 Z32.2 F720
;AFTER_LAYER_CHANGE
;32
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z32 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z32.4 F720
G1 X104.135 Y103.906 F10800
G1 Z32 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X104.135 Y103.635 E.00916
G1 X106.364 Y103.635 E.07546
G1 X106.863 Y104.134 E.02385
G1 X106.863 Y105.866 E.05866
G1 X106.368 Y106.361 E.02366
G1 X104.135 Y106.361 E.0756
G1 X104.135 Y106.094 E.00902
;WIPE_START
G1 F8640
G1 X104.135 Y106.361 E-.06155
G1 X106.368 Y106.361 E-.51571
G1 X106.863 Y105.866 E-.16137
G1 X106.863 Y105.774 E-.02138
;WIPE_END
G1 E-.04 F2100
G1 Z32.4 F720
G1 X142.832 Y106.266 F10800
G1 Z32 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.832 Y103.33 E.09937
G1 X146.166 Y103.33 E.11283
G1 X146.166 Y106.666 E.11291
G1 X142.832 Y106.666 E.11283
G1 X142.832 Y106.326 E.01151
M204 S1000
G1 X142.425 Y107.073 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.485 Y107.073 E.13836
M204 S1000
G1 X142.529 Y106.687 F10800
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z32.4 F720
G1 X145.86 Y106.089 F10800
G1 Z32 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X145.86 Y106.361 E.00918
G1 X143.632 Y106.361 E.07544
G1 X143.137 Y105.866 E.02365
G1 X143.137 Y104.134 E.05866
G1 X143.636 Y103.635 E.02385
G1 X145.86 Y103.635 E.0753
G1 X145.86 Y103.911 E.00932
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:32.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;32.2




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X145.86 Y103.635 E-.06356
G1 X143.636 Y103.635 E-.51369
G1 X143.137 Y104.134 E-.16267
G1 X143.137 Y104.22 E-.02007
;WIPE_END
G1 E-.04 F2100
G1 Z32.4 F720
;AFTER_LAYER_CHANGE
;32.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z32.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z32.6 F720
G1 X104.135 Y103.906 F10800
G1 Z32.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X104.135 Y103.635 E.00916
G1 X106.364 Y103.635 E.07546
G1 X106.863 Y104.134 E.02385
G1 X106.863 Y105.866 E.05866
G1 X106.368 Y106.361 E.02366
G1 X104.135 Y106.361 E.0756
G1 X104.135 Y106.094 E.00902
;WIPE_START
G1 F8640
G1 X104.135 Y106.361 E-.06155
G1 X106.368 Y106.361 E-.51571
G1 X106.863 Y105.866 E-.16137
G1 X106.863 Y105.774 E-.02138
;WIPE_END
G1 E-.04 F2100
G1 Z32.6 F720
G1 X142.832 Y106.266 F10800
G1 Z32.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.832 Y103.33 E.09937
G1 X146.166 Y103.33 E.11283
G1 X146.166 Y106.666 E.11291
G1 X142.832 Y106.666 E.11283
G1 X142.832 Y106.326 E.01151
M204 S1000
G1 X142.425 Y107.073 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.485 Y107.073 E.13836
M204 S1000
G1 X142.529 Y106.687 F10800
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z32.6 F720
G1 X145.86 Y106.089 F10800
G1 Z32.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X145.86 Y106.361 E.00918
G1 X143.632 Y106.361 E.07544
G1 X143.137 Y105.866 E.02365
G1 X143.137 Y104.134 E.05866
G1 X143.636 Y103.635 E.02385
G1 X145.86 Y103.635 E.0753
G1 X145.86 Y103.911 E.00932
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:32.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;32.4




 M104 S210 M109 S210 




;WIPE_START
G1 F8640
G1 X145.86 Y103.635 E-.06356
G1 X143.636 Y103.635 E-.51369
G1 X143.137 Y104.134 E-.16267
G1 X143.137 Y104.22 E-.02007
;WIPE_END
G1 E-.04 F2100
G1 Z32.6 F720
;AFTER_LAYER_CHANGE
;32.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z32.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z32.8 F720
G1 X146.063 Y103.708 F10800
G1 Z32.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z32.8 F720
G1 X106.966 Y106.868 F10800
G1 Z32.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z32.8 F720
G1 X103.937 Y106.292 F10800
G1 Z32.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:32.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;32.6





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z32.8 F720
;AFTER_LAYER_CHANGE
;32.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z32.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
M73 P60 R19
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z33 F720
G1 X146.063 Y103.708 F10800
G1 Z32.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
M73 Q60 S19
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z33 F720
G1 X106.966 Y106.868 F10800
G1 Z32.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z33 F720
G1 X103.937 Y106.292 F10800
G1 Z32.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:32.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;32.8





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z33 F720
;AFTER_LAYER_CHANGE
;32.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z32.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z33.2 F720
G1 X146.063 Y103.708 F10800
G1 Z32.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z33.2 F720
G1 X106.966 Y106.868 F10800
G1 Z32.8 F720
M73 P60 R18
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z33.2 F720
G1 X103.937 Y106.292 F10800
G1 Z32.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:33
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;33





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z33.2 F720
;AFTER_LAYER_CHANGE
;33
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z33 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z33.4 F720
G1 X146.063 Y103.708 F10800
G1 Z33 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z33.4 F720
G1 X106.966 Y106.868 F10800
G1 Z33 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z33.4 F720
G1 X103.937 Y106.292 F10800
G1 Z33 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:33.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;33.2





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z33.4 F720
;AFTER_LAYER_CHANGE
;33.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z33.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z33.6 F720
G1 X146.063 Y103.708 F10800
G1 Z33.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z33.6 F720
G1 X106.966 Y106.868 F10800
G1 Z33.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z33.6 F720
G1 X103.937 Y106.292 F10800
G1 Z33.2 F720
M73 P61 R18
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:33.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;33.4





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z33.6 F720
;AFTER_LAYER_CHANGE
;33.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z33.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
M73 Q61 S18
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z33.8 F720
G1 X146.063 Y103.708 F10800
G1 Z33.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z33.8 F720
G1 X106.966 Y106.868 F10800
G1 Z33.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z33.8 F720
G1 X103.937 Y106.292 F10800
G1 Z33.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:33.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;33.6





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z33.8 F720
;AFTER_LAYER_CHANGE
;33.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z33.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z34 F720
G1 X146.063 Y103.708 F10800
G1 Z33.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z34 F720
G1 X106.966 Y106.868 F10800
G1 Z33.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z34 F720
G1 X103.937 Y106.292 F10800
G1 Z33.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:33.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;33.8





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z34 F720
;AFTER_LAYER_CHANGE
;33.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z33.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z34.2 F720
G1 X146.063 Y103.708 F10800
G1 Z33.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z34.2 F720
G1 X106.966 Y106.868 F10800
G1 Z33.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z34.2 F720
G1 X103.937 Y106.292 F10800
G1 Z33.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:34
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;34





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z34.2 F720
;AFTER_LAYER_CHANGE
;34
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z34 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z34.4 F720
G1 X146.063 Y103.708 F10800
G1 Z34 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z34.4 F720
G1 X106.966 Y106.868 F10800
G1 Z34 F720
M73 P62 R18
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
M73 Q62 S18
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z34.4 F720
G1 X103.937 Y106.292 F10800
G1 Z34 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:34.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;34.2





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z34.4 F720
;AFTER_LAYER_CHANGE
;34.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z34.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z34.6 F720
G1 X146.063 Y103.708 F10800
G1 Z34.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z34.6 F720
G1 X105.302 Y103.532 F10800
G1 Z34.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.06985
G1 X107.366 Y106.868 E.11291
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X105.242 Y103.532 E.05449
M204 S1000
G1 X104.902 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X106.11 Y103.125 E.04091
G1 X106.11 Y102.725 E.01354
G1 X106.406 Y102.725 E.01001
G1 X106.406 Y103.125 E.01354
G1 X107.684 Y103.125 E.04325
G1 X107.684 Y102.725 E.01354
G1 X107.773 Y102.725 E.00301
G1 X107.773 Y107.275 E.15401
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X104.815 Y103.125 E.05381
G1 X104.815 Y102.725 E.01354
G1 X104.902 Y102.725 E.00295
G1 X104.902 Y103.065 E.01151
M204 S1000
G1 X104.93 Y103.524 F10800
;WIPE_START
G1 F8640
G1 X106.11 Y103.125 E-.27938
G1 X106.11 Y102.725 E-.09236
G1 X106.406 Y102.725 E-.06829
G1 X106.406 Y103.125 E-.09236
G1 X107.392 Y103.125 E-.2276
;WIPE_END
G1 E-.04 F2100
G1 Z34.6 F720
G1 X104.066 Y103.837 F10800
G1 Z34.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y105.669 E.04528
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:34.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;34.4





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z34.6 F720
;AFTER_LAYER_CHANGE
;34.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y106.468 F10800
G1 Z34.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.63 Y105.366 E.0373
G1 X142.508 Y105.366 E.00411
G1 X142.508 Y104.63 E.02491
G1 X142.63 Y104.63 E.00411
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
M73 P62 R17
G1 X142.63 Y106.528 E.01151
M204 S1000
G1 X142.223 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.223 Y105.773 E.05084
G1 X142.101 Y105.773 E.00411
G1 X142.101 Y104.223 E.05247
G1 X142.223 Y104.223 E.00411
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.283 Y107.275 E.15206
M204 S1000
G1 X142.326 Y106.889 F10800
;WIPE_START
G1 F8640
G1 X142.223 Y105.773 E-.34709
G1 X142.101 Y105.773 E-.02802
G1 X142.101 Y104.223 E-.3579
G1 X142.218 Y104.223 E-.02698
;WIPE_END
G1 E-.04 F2100
G1 Z34.8 F720
G1 X142.773 Y105.162 F10800
G1 Z34.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.16428
G1 F900
G1 X142.773 Y104.834 E.00332
;WIPE_START
G1 F8640
G1 X142.773 Y105.162 E-.07591
;WIPE_END
G1 E-.72409 F2100
G1 Z34.8 F720
G1 X146.063 Y103.708 F10800
G1 Z34.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.528 E.00651
G1 X143.16 Y104.528 E.00762
G1 X143.16 Y105.468 E.0318
G1 X142.935 Y105.468 E.00762
G1 X142.935 Y105.664 E.00665
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z34.8 F720
G1 X105.162 Y103.532 F10800
G1 Z34.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.0746
G1 X107.366 Y104.63 E.03717
G1 X107.415 Y104.63 E.00167
G1 X107.415 Y105.366 E.02491
G1 X107.366 Y105.366 E.00167
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.285 Y103.532 E.02211
G1 X104.285 Y103.132 E.01354
G1 X104.355 Y103.132 E.00235
G1 X104.355 Y103.532 E.01354
G1 X105.102 Y103.532 E.02529
M204 S1000
G1 X104.762 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X105.471 Y103.125 E.02402
G1 X105.471 Y102.725 E.01354
G1 X105.538 Y102.725 E.00227
G1 X105.538 Y103.125 E.01354
G1 X106.992 Y103.125 E.0492
G1 X106.992 Y102.725 E.01354
G1 X107.125 Y102.725 E.0045
G1 X107.125 Y103.125 E.01354
G1 X107.773 Y103.125 E.02192
G1 X107.773 Y104.223 E.03717
G1 X107.822 Y104.223 E.00167
G1 X107.822 Y105.773 E.05247
G1 X107.773 Y105.773 E.00167
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X103.878 Y103.125 E.02211
G1 X103.878 Y102.725 E.01354
G1 X104.762 Y102.725 E.02991
G1 X104.762 Y103.065 E.01151
M204 S1000
G1 X104.911 Y103.496 F10800
;WIPE_START
G1 F8640
G1 X105.471 Y103.125 E-.16442
G1 X105.471 Y102.725 E-.09236
G1 X105.538 Y102.725 E-.01552
G1 X105.538 Y103.125 E-.09236
G1 X106.992 Y103.125 E-.33563
G1 X106.992 Y102.866 E-.05972
;WIPE_END
G1 E-.04 F2100
G1 Z34.8 F720
G1 X104.066 Y103.837 F10800
G1 Z34.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.935 E.02045
G1 X107.11 Y104.935 E.00167
G1 X107.11 Y105.061 E.00424
G1 X107.06 Y105.061 E.00167
G1 X107.06 Y105.669 E.02059
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:34.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;34.6





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z34.8 F720
;AFTER_LAYER_CHANGE
;34.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z34.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.27 Y105.366 E.01217
G1 X142.27 Y104.63 E.02491
G1 X142.63 Y104.63 E.01217
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.863 Y105.773 E.01217
G1 X141.863 Y104.223 E.05247
G1 X142.223 Y104.223 E.01217
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.077 Y105.444 F10800
;WIPE_START
G1 F8640
G1 X141.863 Y105.773 E-.08415
G1 X141.863 Y104.223 E-.3579
G1 X142.223 Y104.223 E-.083
G1 X142.223 Y103.205 E-.23495
;WIPE_END
G1 E-.04 F2100
G1 Z35 F720
G1 X146.063 Y106.292 F10800
G1 Z34.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y106.563 E.00917
G1 X143.834 Y106.563 E.07545
G1 X142.935 Y105.664 E.04301
G1 X142.935 Y105.596 E.00231
G1 X142.969 Y105.596 E.00114
G1 X143.288 Y105.276 E.0153
G1 X143.288 Y104.72 E.01885
G1 X142.969 Y104.4 E.0153
G1 X142.935 Y104.4 E.00114
G1 X142.935 Y104.336 E.00217
G1 X143.834 Y103.437 E.04301
G1 X146.063 Y103.437 E.07545
G1 X146.063 Y103.708 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y103.437 E-.06255
G1 X143.834 Y103.437 E-.5147
G1 X143.274 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z35 F720
G1 X104.032 Y103.532 F10800
G1 Z34.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.11283
G1 X107.366 Y104.63 E.03717
G1 X107.512 Y104.63 E.00494
G1 X107.512 Y105.366 E.02491
G1 X107.366 Y105.366 E.00494
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.972 Y103.532 E.01151
M204 S1000
G1 X103.294 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.079 Y103.125 E.0266
G1 X104.079 Y102.725 E.01354
G1 X104.679 Y102.725 E.0203
G1 X104.679 Y103.125 E.01354
G1 X105.382 Y103.125 E.02379
G1 X105.382 Y102.725 E.01354
G1 X105.628 Y102.725 E.00833
G1 X105.628 Y103.125 E.01354
G1 X106.899 Y103.125 E.04303
G1 X106.899 Y102.725 E.01354
G1 X107.23 Y102.725 E.01119
G1 X107.23 Y103.125 E.01354
G1 X107.773 Y103.125 E.01838
G1 X107.773 Y104.223 E.03717
G1 X107.919 Y104.223 E.00494
G1 X107.919 Y105.773 E.05247
G1 X107.773 Y105.773 E.00494
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.294 Y102.725 E.00232
G1 X103.294 Y103.065 E.01151
M204 S1000
G1 X103.316 Y103.524 F10800
;WIPE_START
G1 F8640
G1 X104.079 Y103.125 E-.18196
G1 X104.079 Y102.725 E-.09236
G1 X104.679 Y102.725 E-.13847
G1 X104.679 Y103.125 E-.09236
G1 X105.382 Y103.125 E-.16229
G1 X105.382 Y102.725 E-.09236
G1 X105.383 Y102.725 E-.00019
;WIPE_END
G1 E-.04 F2100
G1 Z35 F720
G1 X104.066 Y103.837 F10800
G1 Z34.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.528 E.00667
G1 X106.835 Y104.528 E.00762
G1 X106.835 Y105.468 E.0318
G1 X107.06 Y105.468 E.00762
G1 X107.06 Y105.669 E.00681
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
M73 P63 R17
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z35 F720
G1 X104.379 Y103.329 F10800
G1 Z34.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.235536
G1 F900
G1 X104.379 Y102.929 E.00641
;WIPE_START
G1 F8640
G1 X104.379 Y103.329 E-.09236
;WIPE_END
G1 E-.70764 F2100
G1 Z35 F720
G1 X107.235 Y104.834 F10800
G1 Z34.6 F720
G1 E.8 F2100
;WIDTH:0.188968
G1 F900
G1 X107.235 Y105.162 E.00399
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:34.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;34.8





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X107.235 Y104.834 E-.07591
;WIPE_END
G1 E-.72409 F2100
G1 Z35 F720
;AFTER_LAYER_CHANGE
;34.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z34.8 F720
M73 Q63 S18
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X142.032 Y105.366 E.02023
G1 X142.032 Y104.63 E.02491
G1 X142.63 Y104.63 E.02023
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.625 Y105.773 E.02023
G1 X141.625 Y104.223 E.05247
M73 Q63 S17
G1 X142.223 Y104.223 E.02023
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X141.625 Y105.773 E-.13867
G1 X141.625 Y104.223 E-.3579
G1 X142.223 Y104.223 E-.13797
G1 X142.223 Y103.68 E-.12546
;WIPE_END
G1 E-.04 F2100
G1 Z35.2 F720
G1 X143.064 Y104.867 F10800
G1 Z34.8 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.531415
G1 F900
G1 X142.688 Y105.244 E.02165
;WIPE_START
G1 F8640
G1 X143.064 Y104.867 E-.12306
;WIPE_END
G1 E-.67694 F2100
G1 Z35.2 F720
G1 X146.063 Y106.292 F10800
G1 Z34.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y106.563 E.00917
G1 X143.834 Y106.563 E.07545
G1 X142.935 Y105.664 E.04301
G1 X142.935 Y105.596 E.00231
G1 X142.969 Y105.596 E.00114
G1 X143.288 Y105.276 E.0153
G1 X143.288 Y104.72 E.01885
G1 X142.969 Y104.4 E.0153
G1 X142.935 Y104.4 E.00114
G1 X142.935 Y104.336 E.00217
G1 X143.834 Y103.437 E.04301
G1 X146.063 Y103.437 E.07545
G1 X146.063 Y103.708 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y103.437 E-.06256
G1 X143.834 Y103.437 E-.5147
G1 X143.274 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z35.2 F720
G1 X104.032 Y103.532 F10800
G1 Z34.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X106.776 Y103.532 E.09288
G1 X106.776 Y103.132 E.01354
G1 X106.837 Y103.132 E.00206
G1 X106.837 Y103.532 E.01354
G1 X107.366 Y103.532 E.0179
G1 X107.366 Y104.63 E.03717
G1 X107.623 Y104.63 E.0087
G1 X107.623 Y105.366 E.02491
G1 X107.366 Y105.366 E.0087
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.972 Y103.532 E.01151
M204 S1000
G1 X103.508 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.314 Y103.125 E.02729
G1 X104.314 Y102.725 E.01354
G1 X104.641 Y102.725 E.01108
G1 X104.641 Y103.125 E.01354
G1 X105.34 Y103.125 E.02366
G1 X105.34 Y102.725 E.01354
G1 X105.669 Y102.725 E.01112
G1 X105.669 Y103.125 E.01354
G1 X106.369 Y103.125 E.02369
G1 X106.369 Y102.725 E.01354
G1 X107.244 Y102.725 E.02962
G1 X107.244 Y103.125 E.01354
G1 X107.773 Y103.125 E.0179
G1 X107.773 Y104.223 E.03717
G1 X108.03 Y104.223 E.0087
G1 X108.03 Y105.773 E.05247
G1 X107.773 Y105.773 E.0087
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.508 Y102.725 E.00958
G1 X103.508 Y103.065 E.01151
M204 S1000
G1 X103.589 Y103.517 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:35
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;35





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z35.2 F720
;AFTER_LAYER_CHANGE
;35
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z35 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X141.794 Y105.366 E.02829
G1 X141.794 Y104.63 E.02491
G1 X142.63 Y104.63 E.02828
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.387 Y105.773 E.02828
G1 X141.387 Y104.223 E.05247
G1 X142.223 Y104.223 E.02828
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
G1 X141.998 Y104.998
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X142.833 Y104.998 E.02284
;WIPE_START
G1 F8640
G1 X141.998 Y104.998 E-.19295
;WIPE_END
G1 E-.60705 F2100
G1 Z35.4 F720
G1 X146.063 Y103.708 F10800
G1 Z35 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z35.4 F720
G1 X104.144 Y103.532 F10800
G1 Z35 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.10903
G1 X107.366 Y104.63 E.03717
G1 X107.742 Y104.63 E.01274
G1 X107.742 Y105.366 E.02491
G1 X107.366 Y105.366 E.01274
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.084 Y103.532 E.01531
M204 S1000
G1 X103.744 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.529 Y103.125 E.02655
G1 X104.529 Y102.725 E.01354
G1 X104.631 Y102.725 E.00346
G1 X104.631 Y103.125 E.01354
G1 X105.331 Y103.125 E.02368
G1 X105.331 Y102.725 E.01354
G1 X105.679 Y102.725 E.01178
G1 X105.679 Y103.125 E.01354
G1 X106.381 Y103.125 E.02375
G1 X106.381 Y102.725 E.01354
G1 X107.188 Y102.725 E.02733
G1 X107.188 Y103.125 E.01354
G1 X107.773 Y103.125 E.0198
G1 X107.773 Y104.223 E.03717
G1 X108.149 Y104.223 E.01274
G1 X108.149 Y105.773 E.05247
G1 X107.773 Y105.773 E.01274
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.744 Y102.725 E.01758
G1 X103.744 Y103.065 E.01151
M204 S1000
G1 X103.865 Y103.507 F10800
G1 X103.485 Y102.929
;TYPE:Gap fill
;WIDTH:0.155312
G1 F900
G1 X103.485 Y103.329 E.00374
G1 X104.066 Y103.837 F10800
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:35.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;35.2





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z35.4 F720
;AFTER_LAYER_CHANGE
;35.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z35.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X141.556 Y105.366 E.03634
G1 X141.556 Y104.63 E.02491
G1 X142.63 Y104.63 E.03634
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.149 Y105.773 E.03634
G1 X141.149 Y104.223 E.05247
G1 X142.223 Y104.223 E.03634
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
G1 X141.76 Y104.998
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X142.833 Y104.998 E.02935
;WIPE_START
G1 F8640
G1 X141.76 Y104.998 E-.24792
;WIPE_END
G1 E-.55208 F2100
G1 Z35.6 F720
G1 X146.063 Y103.708 F10800
G1 Z35.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z35.6 F720
G1 X104.34 Y103.532 F10800
G1 Z35.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.1024
G1 X107.366 Y104.63 E.03717
G1 X107.87 Y104.63 E.01708
G1 X107.87 Y105.366 E.02491
G1 X107.366 Y105.366 E.01708
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.28 Y103.532 E.02194
M204 S1000
G1 X103.94 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X105.332 Y103.125 E.04712
G1 X105.332 Y102.725 E.01354
G1 X105.679 Y102.725 E.01174
G1 X105.679 Y103.125 E.01354
G1 X107.773 Y103.125 E.07087
G1 X107.773 Y104.223 E.03717
G1 X108.277 Y104.223 E.01708
G1 X108.277 Y105.773 E.05247
G1 X107.773 Y105.773 E.01708
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.94 Y102.725 E.02421
G1 X103.94 Y103.065 E.01151
M204 S1000
G1 X104.079 Y103.5 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:35.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;35.4





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z35.6 F720
;AFTER_LAYER_CHANGE
;35.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z35.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X141.318 Y105.366 E.0444
G1 X141.318 Y104.63 E.02491
G1 X142.63 Y104.63 E.0444
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.911 Y105.773 E.0444
G1 X140.911 Y104.223 E.05247
G1 X142.223 Y104.223 E.0444
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
M73 P64 R17
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.911 Y105.773 E-.30321
G1 X140.911 Y104.223 E-.3579
G1 X141.339 Y104.223 E-.09889
;WIPE_END
G1 E-.04 F2100
G1 Z35.8 F720
G1 X142.833 Y104.998 F10800
G1 Z35.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
M73 Q64 S17
G1 F900
G1 X141.521 Y104.998 E.03586
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.30289
;WIPE_END
G1 E-.49711 F2100
G1 Z35.8 F720
G1 X146.063 Y103.708 F10800
G1 Z35.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z35.8 F720
G1 X104.475 Y103.532 F10800
G1 Z35.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.09784
G1 X107.366 Y104.63 E.03717
G1 X108.011 Y104.63 E.02186
G1 X108.011 Y105.366 E.02491
G1 X107.366 Y105.366 E.02186
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X103.668 Y103.132 E.00121
G1 X103.668 Y103.532 E.01354
G1 X104.415 Y103.532 E.02529
M204 S1000
G1 X104.075 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X105.346 Y103.125 E.04302
G1 X105.346 Y102.725 E.01354
G1 X105.667 Y102.725 E.01085
G1 X105.667 Y103.125 E.01354
G1 X107.519 Y103.125 E.06269
G1 X107.519 Y102.725 E.01354
G1 X107.773 Y102.725 E.00859
G1 X107.773 Y104.223 E.05071
G1 X108.418 Y104.223 E.02186
G1 X108.418 Y105.773 E.05247
G1 X107.773 Y105.773 E.02186
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X104.075 Y102.725 E.02877
G1 X104.075 Y103.065 E.01151
M204 S1000
G1 X104.222 Y103.497 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X106.728 Y104.72 E.01559
G1 X106.728 Y105.276 E.01885
G1 X107.06 Y105.596 E.01559
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z35.8 F720
G1 X106.953 Y104.812 F10800
G1 Z35.4 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.531415
G1 F900
G1 X107.385 Y105.244 E.02482
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:35.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;35.6





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X106.953 Y104.812 E-.14111
;WIPE_END
G1 E-.65889 F2100
G1 Z35.8 F720
;AFTER_LAYER_CHANGE
;35.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z35.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X141.08 Y105.366 E.05246
G1 X141.08 Y104.63 E.02491
G1 X142.63 Y104.63 E.05246
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.673 Y105.773 E.05246
G1 X140.673 Y104.223 E.05247
G1 X142.223 Y104.223 E.05246
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.673 Y105.773 E-.35814
G1 X140.673 Y104.223 E-.3579
G1 X140.863 Y104.223 E-.04396
;WIPE_END
G1 E-.04 F2100
G1 Z36 F720
G1 X142.833 Y104.998 F10800
G1 Z35.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X141.283 Y104.998 E.04237
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.35787
;WIPE_END
G1 E-.44213 F2100
G1 Z36 F720
G1 X146.063 Y103.708 F10800
G1 Z35.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z36 F720
G1 X104.504 Y103.532 F10800
G1 Z35.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.09686
G1 X107.366 Y104.63 E.03717
G1 X108.167 Y104.63 E.02713
G1 X108.167 Y105.366 E.02491
G1 X107.366 Y105.366 E.02713
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.444 Y103.532 E.02748
M204 S1000
G1 X104.104 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X105.393 Y103.125 E.04365
G1 X105.393 Y102.725 E.01354
G1 X105.619 Y102.725 E.00763
G1 X105.619 Y103.125 E.01354
G1 X106.325 Y103.125 E.0239
G1 X106.325 Y102.725 E.01354
G1 X106.33 Y103.125 E.01354
G1 X107.017 Y103.125 E.02327
G1 X107.017 Y102.725 E.01354
G1 X107.773 Y102.725 E.02557
G1 X107.773 Y104.223 E.05071
G1 X108.574 Y104.223 E.02713
G1 X108.574 Y105.773 E.05247
G1 X107.773 Y105.773 E.02713
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X103.801 Y103.125 E.01951
G1 X103.801 Y102.725 E.01354
G1 X104.104 Y102.725 E.01024
G1 X104.104 Y103.065 E.01151
M204 S1000
G1 X104.19 Y103.516 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
M73 P64 R16
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z36 F720
G1 X107.162 Y104.998 F10800
G1 Z35.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X107.963 Y104.998 E.02191
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:35.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;35.8





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.18506
;WIPE_END
G1 E-.61494 F2100
G1 Z36 F720
;AFTER_LAYER_CHANGE
;35.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z35.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X140.842 Y105.366 E.06052
G1 X140.842 Y104.63 E.02491
G1 X142.63 Y104.63 E.06052
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.435 Y105.773 E.06052
G1 X140.435 Y104.223 E.05247
G1 X142.223 Y104.223 E.06052
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.435 Y105.773 E-.41308
G1 X140.435 Y104.271 E-.34692
;WIPE_END
G1 E-.04 F2100
G1 Z36.2 F720
G1 X142.833 Y104.998 F10800
G1 Z35.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X141.045 Y104.998 E.04888
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.41284
;WIPE_END
G1 E-.38716 F2100
G1 Z36.2 F720
G1 X146.063 Y103.708 F10800
G1 Z35.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z36.2 F720
G1 X104.408 Y103.532 F10800
G1 Z35.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.1001
G1 X107.366 Y104.63 E.03717
G1 X108.335 Y104.63 E.03283
G1 X108.335 Y105.366 E.02491
G1 X107.366 Y105.366 E.03283
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.348 Y103.532 E.02424
M204 S1000
G1 X104.008 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.755 Y103.125 E.02527
G1 X104.755 Y102.725 E.01354
G1 X104.764 Y103.125 E.01354
G1 X105.494 Y103.125 E.0247
G1 X105.494 Y102.725 E.01354
G1 X105.514 Y102.725 E.00067
G1 X105.514 Y103.125 E.01354
G1 X106.244 Y103.125 E.02471
G1 X106.244 Y102.725 E.01354
G1 X106.367 Y102.725 E.00418
G1 X106.367 Y103.125 E.01354
G1 X107.058 Y103.125 E.02336
G1 X107.058 Y102.725 E.01354
G1 X107.773 Y102.725 E.02421
G1 X107.773 Y104.223 E.05071
G1 X108.742 Y104.223 E.03283
G1 X108.742 Y105.773 E.05247
G1 X107.773 Y105.773 E.03283
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X103.902 Y103.125 E.02291
G1 X103.902 Y102.725 E.01354
G1 X104.008 Y102.725 E.0036
G1 X104.008 Y103.065 E.01151
M204 S1000
G1 X104.043 Y103.523 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z36.2 F720
G1 X107.162 Y104.998 F10800
G1 Z35.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.132 Y104.998 E.02651
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:36
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;36





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.22392
;WIPE_END
G1 E-.57608 F2100
G1 Z36.2 F720
;AFTER_LAYER_CHANGE
;36
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z36 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X140.604 Y105.366 E.06858
G1 X140.604 Y104.63 E.02491
G1 X142.63 Y104.63 E.06858
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.197 Y105.773 E.06858
G1 X140.197 Y104.223 E.05247
G1 X142.223 Y104.223 E.06858
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
M73 P65 R16
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.197 Y105.773 E-.46803
G1 X140.197 Y104.509 E-.29197
;WIPE_END
G1 E-.04 F2100
G1 Z36.4 F720
G1 X142.833 Y104.998 F10800
G1 Z36 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.807 Y104.998 E.05539
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.46782
;WIPE_END
G1 E-.33218 F2100
M73 Q65 S17
G1 Z36.4 F720
G1 X146.063 Y103.708 F10800
G1 Z36 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z36.4 F720
G1 X104.032 Y103.532 F10800
G1 Z36 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.11283
G1 X107.366 Y104.63 E.03717
G1 X108.518 Y104.63 E.03902
G1 X108.518 Y105.366 E.02491
G1 X107.366 Y105.366 E.03902
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.972 Y103.532 E.01151
M204 S1000
G1 X103.347 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.568 Y103.125 E.04133
G1 X104.568 Y102.725 E.01354
G1 X104.933 Y102.725 E.01236
G1 X104.933 Y103.125 E.01354
M73 Q65 S16
G1 X106.076 Y103.125 E.03869
G1 X106.076 Y102.725 E.01354
G1 X106.405 Y102.725 E.01115
G1 X106.405 Y103.125 E.01354
G1 X107.773 Y103.125 E.04629
G1 X107.773 Y104.223 E.03717
G1 X108.925 Y104.223 E.03902
G1 X108.925 Y105.773 E.05247
G1 X107.773 Y105.773 E.03902
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.347 Y102.725 E.00412
G1 X103.347 Y103.065 E.01151
M204 S1000
G1 X103.386 Y103.523 F10800
;WIPE_START
G1 F8640
G1 X104.568 Y103.125 E-.28225
G1 X104.568 Y102.725 E-.09236
G1 X104.933 Y102.725 E-.08429
G1 X104.933 Y103.125 E-.09236
G1 X105.837 Y103.125 E-.20874
;WIPE_END
G1 E-.04 F2100
G1 Z36.4 F720
G1 X104.066 Y103.837 F10800
G1 Z36 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z36.4 F720
G1 X107.162 Y104.998 F10800
G1 Z36 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.315 Y104.998 E.03151
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:36.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;36.2





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.26615
;WIPE_END
G1 E-.53385 F2100
G1 Z36.4 F720
;AFTER_LAYER_CHANGE
;36.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z36.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X140.366 Y105.366 E.07664
G1 X140.366 Y104.63 E.02491
G1 X142.63 Y104.63 E.07664
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.959 Y105.773 E.07664
G1 X139.959 Y104.223 E.05247
G1 X142.223 Y104.223 E.07664
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.959 Y105.773 E-.52298
G1 X139.959 Y104.746 E-.23702
;WIPE_END
G1 E-.04 F2100
G1 Z36.6 F720
G1 X142.833 Y104.998 F10800
G1 Z36.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.569 Y104.998 E.06189
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.52279
;WIPE_END
G1 E-.27721 F2100
G1 Z36.6 F720
G1 X146.063 Y103.708 F10800
G1 Z36.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z36.6 F720
G1 X108.173 Y104.63 F10800
G1 Z36.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X108.721 Y104.63 E.01855
G1 X108.721 Y105.366 E.02491
G1 X107.366 Y105.366 E.04587
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.128 Y104.223 E.04587
G1 X109.128 Y105.773 E.05247
G1 X107.773 Y105.773 E.04587
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.128 Y104.223 E-.31319
G1 X109.128 Y105.773 E-.3579
G1 X108.743 Y105.773 E-.08891
;WIPE_END
G1 E-.04 F2100
G1 Z36.6 F720
G1 X107.162 Y104.998 F10800
G1 Z36.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.517 Y104.998 E.03704
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.31288
;WIPE_END
G1 E-.48712 F2100
G1 Z36.6 F720
G1 X103.937 Y103.708 F10800
G1 Z36.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:36.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;36.4





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z36.6 F720
;AFTER_LAYER_CHANGE
;36.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z36.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X140.128 Y105.366 E.0847
G1 X140.128 Y104.63 E.02491
G1 X142.63 Y104.63 E.0847
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.72 Y105.773 E.0847
G1 X139.72 Y104.223 E.05247
G1 X142.223 Y104.223 E.0847
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.72 Y105.773 E-.57794
G1 X139.72 Y104.985 E-.18206
;WIPE_END
G1 E-.04 F2100
G1 Z36.8 F720
G1 X142.833 Y104.998 F10800
G1 Z36.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.331 Y104.998 E.0684
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.57777
;WIPE_END
G1 E-.22223 F2100
G1 Z36.8 F720
G1 X146.063 Y103.708 F10800
G1 Z36.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z36.8 F720
G1 X108.173 Y104.63 F10800
G1 Z36.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X108.944 Y104.63 E.0261
G1 X108.944 Y105.366 E.02491
G1 X107.366 Y105.366 E.05342
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.351 Y104.223 E.05342
G1 X109.351 Y105.773 E.05247
G1 X107.773 Y105.773 E.05342
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.351 Y104.223 E-.36469
G1 X109.351 Y105.773 E-.3579
G1 X109.189 Y105.773 E-.03741
;WIPE_END
G1 E-.04 F2100
G1 Z36.8 F720
G1 X107.162 Y104.998 F10800
G1 Z36.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.74 Y104.998 E.04314
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.36442
;WIPE_END
G1 E-.43558 F2100
G1 Z36.8 F720
G1 X103.937 Y103.708 F10800
G1 Z36.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:36.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;36.6





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z36.8 F720
;AFTER_LAYER_CHANGE
;36.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z36.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.889 Y105.366 E.09276
G1 X139.889 Y104.63 E.02491
G1 X142.63 Y104.63 E.09276
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
M73 P66 R16
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.482 Y105.773 E.09276
G1 X139.482 Y104.223 E.05247
M73 Q66 S16
G1 X142.223 Y104.223 E.09276
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.482 Y105.773 E-.6329
G1 X139.482 Y105.223 E-.1271
;WIPE_END
G1 E-.04 F2100
G1 Z37 F720
G1 X142.833 Y104.998 F10800
G1 Z36.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.093 Y104.998 E.07491
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.63274
;WIPE_END
G1 E-.16726 F2100
G1 Z37 F720
G1 X146.063 Y103.708 F10800
G1 Z36.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z37 F720
G1 X108.173 Y104.63 F10800
G1 Z36.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.192 Y104.63 E.03451
G1 X109.192 Y105.366 E.02491
G1 X107.366 Y105.366 E.06183
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.599 Y104.223 E.06183
G1 X109.599 Y105.773 E.05247
G1 X107.773 Y105.773 E.06183
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.599 Y104.223 E-.42202
G1 X109.599 Y105.687 E-.33798
;WIPE_END
G1 E-.04 F2100
G1 Z37 F720
G1 X107.162 Y104.998 F10800
G1 Z36.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.989 Y104.998 E.04994
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.42179
;WIPE_END
G1 E-.37821 F2100
G1 Z37 F720
G1 X103.937 Y103.708 F10800
G1 Z36.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:36.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;36.8





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z37 F720
;AFTER_LAYER_CHANGE
;36.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z36.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.651 Y105.366 E.10082
G1 X139.651 Y104.63 E.02491
G1 X142.63 Y104.63 E.10081
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.244 Y105.773 E.10081
G1 X139.244 Y104.223 E.05247
G1 X142.223 Y104.223 E.10081
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.244 Y105.773 E-.68786
G1 X139.244 Y105.461 E-.07214
;WIPE_END
G1 E-.04 F2100
G1 Z37.2 F720
G1 X142.833 Y104.998 F10800
G1 Z36.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.855 Y104.998 E.08142
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.68772
;WIPE_END
G1 E-.11228 F2100
G1 Z37.2 F720
G1 X146.063 Y103.708 F10800
G1 Z36.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z37.2 F720
G1 X108.173 Y104.63 F10800
G1 Z36.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.472 Y104.63 E.04398
G1 X109.472 Y105.366 E.02491
G1 X107.366 Y105.366 E.0713
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.879 Y104.223 E.0713
G1 X109.879 Y105.773 E.05247
G1 X107.773 Y105.773 E.0713
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
M73 P66 R15
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.879 Y104.223 E-.48654
G1 X109.879 Y105.407 E-.27346
;WIPE_END
G1 E-.04 F2100
G1 Z37.2 F720
G1 X107.162 Y104.998 F10800
G1 Z36.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.268 Y104.998 E.05758
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.48634
;WIPE_END
G1 E-.31366 F2100
G1 Z37.2 F720
G1 X103.937 Y103.708 F10800
G1 Z36.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:37
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;37





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z37.2 F720
;AFTER_LAYER_CHANGE
;37
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z37 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.413 Y105.366 E.10887
G1 X139.413 Y104.63 E.02491
G1 X142.63 Y104.63 E.10887
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.006 Y105.773 E.10887
G1 X139.006 Y104.223 E.05247
G1 X142.223 Y104.223 E.10887
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.006 Y105.773 E-.74282
G1 X139.006 Y105.699 E-.01718
;WIPE_END
G1 E-.04 F2100
G1 Z37.4 F720
G1 X142.833 Y104.998 F10800
G1 Z37 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.617 Y104.998 E.08793
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.74269
;WIPE_END
G1 E-.05731 F2100
G1 Z37.4 F720
G1 X146.063 Y103.708 F10800
G1 Z37 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z37.4 F720
G1 X108.173 Y104.63 F10800
G1 Z37 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.788 Y104.63 E.05468
G1 X109.788 Y105.366 E.02491
G1 X107.366 Y105.366 E.082
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X110.195 Y104.223 E.082
G1 X110.195 Y105.773 E.05247
G1 X107.773 Y105.773 E.082
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
M73 P67 R15
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X110.195 Y104.223 E-.55952
G1 X110.195 Y105.091 E-.20048
;WIPE_END
G1 E-.04 F2100
G1 Z37.4 F720
G1 X107.162 Y104.998 F10800
G1 Z37 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.584 Y104.998 E.06622
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.55934
;WIPE_END
G1 E-.24066 F2100
M73 Q67 S16
G1 Z37.4 F720
G1 X103.937 Y103.708 F10800
G1 Z37 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:37.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;37.2





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z37.4 F720
;AFTER_LAYER_CHANGE
;37.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z37.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.175 Y105.366 E.11693
G1 X139.175 Y104.63 E.02491
G1 X142.63 Y104.63 E.11693
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X138.768 Y105.773 E.11693
G1 X138.768 Y104.223 E.05247
G1 X142.223 Y104.223 E.11693
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
M73 Q67 S15
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X138.932 Y105.776 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z37.6 F720
G1 X142.833 Y104.998 F10800
G1 Z37.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.379 Y104.998 E.09444
;WIPE_START
G1 F8640
G1 X142.67 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z37.6 F720
G1 X146.063 Y103.708 F10800
G1 Z37.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z37.6 F720
G1 X108.173 Y104.63 F10800
G1 Z37.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X110.16 Y104.63 E.06727
G1 X110.16 Y105.366 E.02491
G1 X107.366 Y105.366 E.09459
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X110.567 Y104.223 E.09459
G1 X110.567 Y105.773 E.05247
G1 X107.773 Y105.773 E.09459
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X110.567 Y104.223 E-.64542
G1 X110.567 Y104.719 E-.11458
;WIPE_END
G1 E-.04 F2100
G1 Z37.6 F720
G1 X107.162 Y104.998 F10800
G1 Z37.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.957 Y104.998 E.0764
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.64527
;WIPE_END
G1 E-.15473 F2100
G1 Z37.6 F720
G1 X103.937 Y103.708 F10800
G1 Z37.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:37.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;37.4





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z37.6 F720
;AFTER_LAYER_CHANGE
;37.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.373 Y105.366 F10800
G1 Z37.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F927
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X110.992 Y104.63 E.12276
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X138.343 Y104.63 E.87951
;TYPE:Perimeter
;WIDTH:0.45
G1 F927
G1 X142.63 Y104.63 E.1451
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.366 E.05084
G1 X138.343 Y105.366 E.1451
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X110.992 Y105.366 E.87951
;TYPE:Perimeter
;WIDTH:0.45
G1 F927
G1 X107.433 Y105.366 E.12049
M204 S1000
G1 X107.773 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F927
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.223 E.05071
G1 X110.992 Y104.223 E.10898
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X138.343 Y104.223 E.87951
;TYPE:External perimeter
;WIDTH:0.45
G1 F927
G1 X142.223 Y104.223 E.13132
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X138.343 Y105.773 E.13132
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X110.992 Y105.773 E.87951
;TYPE:External perimeter
;WIDTH:0.45
G1 F927
G1 X107.833 Y105.773 E.10695
M204 S1000
;WIPE_START
G1 F8640
G1 X107.773 Y107.275 E-.34709
G1 X105.984 Y107.275 E-.41291
;WIPE_END
G1 E-.04 F2100
G1 Z37.8 F720
G1 X107.162 Y104.998 F10800
G1 Z37.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F927
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z37.8 F720
G1 X146.063 Y103.708 F10800
G1 Z37.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F927
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z37.8 F720
G1 X103.937 Y106.292 F10800
G1 Z37.4 F720
G1 E.8 F2100
G1 F927
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
M73 P68 R15
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:37.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;37.6





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z37.8 F720
;AFTER_LAYER_CHANGE
;37.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z37.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F1087
G1 X142.63 Y104.63 E1.16633
G1 X142.63 Y103.132 E.05071
M73 Q68 S15
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.366 E.05084
G1 X107.366 Y105.366 E1.19365
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F1087
G1 X142.223 Y104.223 E1.16609
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X107.773 Y105.773 E1.16609
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X111.064 Y104.169 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z38 F720
G1 X107.162 Y104.998 F10800
G1 Z37.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F1087
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z38 F720
G1 X146.063 Y103.708 F10800
G1 Z37.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F1087
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z38 F720
G1 X103.937 Y106.292 F10800
G1 Z37.6 F720
G1 E.8 F2100
G1 F1087
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:37.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;37.8





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z38 F720
;AFTER_LAYER_CHANGE
;37.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z37.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F1087
G1 X142.63 Y104.63 E1.16633
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.366 E.05084
G1 X107.366 Y105.366 E1.19365
G1 X107.366 Y106.868 E.05084
M73 P68 R14
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F1087
G1 X142.223 Y104.223 E1.16609
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X107.773 Y105.773 E1.16609
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X111.064 Y104.169 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z38.2 F720
G1 X107.162 Y104.998 F10800
G1 Z37.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F1087
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
M73 P69 R14
M73 Q69 S15
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z38.2 F720
G1 X146.063 Y103.708 F10800
G1 Z37.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F1087
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z38.2 F720
G1 X103.937 Y106.292 F10800
G1 Z37.8 F720
G1 E.8 F2100
G1 F1087
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:38
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;38





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z38.2 F720
;AFTER_LAYER_CHANGE
;38
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z38 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z38.4 F720
G1 X104.135 Y103.906 F10800
G1 Z38 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X104.135 Y103.635 E.00916
G1 X106.364 Y103.635 E.07546
G1 X106.863 Y104.134 E.02385
G1 X106.863 Y105.866 E.05866
G1 X106.368 Y106.361 E.02366
G1 X104.135 Y106.361 E.0756
G1 X104.135 Y106.094 E.00902
;WIPE_START
G1 F8640
G1 X104.135 Y106.361 E-.06155
G1 X106.368 Y106.361 E-.51571
M73 Q69 S14
G1 X106.863 Y105.866 E-.16137
G1 X106.863 Y105.774 E-.02138
;WIPE_END
G1 E-.04 F2100
G1 Z38.4 F720
G1 X142.832 Y106.266 F10800
G1 Z38 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.832 Y103.33 E.09937
G1 X146.166 Y103.33 E.11283
G1 X146.166 Y106.666 E.11291
G1 X142.832 Y106.666 E.11283
G1 X142.832 Y106.326 E.01151
M204 S1000
G1 X142.425 Y107.073 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.485 Y107.073 E.13836
M204 S1000
G1 X142.529 Y106.687 F10800
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z38.4 F720
G1 X145.86 Y106.089 F10800
G1 Z38 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X145.86 Y106.361 E.00918
G1 X143.632 Y106.361 E.07544
G1 X143.137 Y105.866 E.02365
G1 X143.137 Y104.134 E.05866
G1 X143.636 Y103.635 E.02385
G1 X145.86 Y103.635 E.0753
G1 X145.86 Y103.911 E.00932
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:38.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;38.2





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X145.86 Y103.635 E-.06356
G1 X143.636 Y103.635 E-.51369
G1 X143.137 Y104.134 E-.16267
G1 X143.137 Y104.22 E-.02007
;WIPE_END
G1 E-.04 F2100
G1 Z38.4 F720
;AFTER_LAYER_CHANGE
;38.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z38.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z38.6 F720
G1 X104.135 Y103.906 F10800
G1 Z38.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X104.135 Y103.635 E.00916
G1 X106.364 Y103.635 E.07546
G1 X106.863 Y104.134 E.02385
G1 X106.863 Y105.866 E.05866
G1 X106.368 Y106.361 E.02366
G1 X104.135 Y106.361 E.0756
G1 X104.135 Y106.094 E.00902
;WIPE_START
G1 F8640
G1 X104.135 Y106.361 E-.06155
G1 X106.368 Y106.361 E-.51571
G1 X106.863 Y105.866 E-.16137
G1 X106.863 Y105.774 E-.02138
;WIPE_END
G1 E-.04 F2100
G1 Z38.6 F720
G1 X142.832 Y106.266 F10800
G1 Z38.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.832 Y103.33 E.09937
G1 X146.166 Y103.33 E.11283
G1 X146.166 Y106.666 E.11291
G1 X142.832 Y106.666 E.11283
G1 X142.832 Y106.326 E.01151
M204 S1000
G1 X142.425 Y107.073 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.485 Y107.073 E.13836
M204 S1000
G1 X142.529 Y106.687 F10800
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z38.6 F720
G1 X145.86 Y106.089 F10800
G1 Z38.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X145.86 Y106.361 E.00918
G1 X143.632 Y106.361 E.07544
G1 X143.137 Y105.866 E.02365
G1 X143.137 Y104.134 E.05866
G1 X143.636 Y103.635 E.02385
G1 X145.86 Y103.635 E.0753
G1 X145.86 Y103.911 E.00932
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:38.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;38.4





 M104 S205 M109 S205 



;WIPE_START
G1 F8640
G1 X145.86 Y103.635 E-.06356
G1 X143.636 Y103.635 E-.51369
G1 X143.137 Y104.134 E-.16267
G1 X143.137 Y104.22 E-.02007
;WIPE_END
G1 E-.04 F2100
G1 Z38.6 F720
;AFTER_LAYER_CHANGE
;38.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z38.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z38.8 F720
G1 X104.135 Y103.906 F10800
G1 Z38.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X104.135 Y103.635 E.00916
G1 X106.364 Y103.635 E.07546
G1 X106.863 Y104.134 E.02385
G1 X106.863 Y105.866 E.05866
G1 X106.368 Y106.361 E.02366
G1 X104.135 Y106.361 E.0756
G1 X104.135 Y106.094 E.00902
;WIPE_START
G1 F8640
G1 X104.135 Y106.361 E-.06155
G1 X106.368 Y106.361 E-.51571
G1 X106.863 Y105.866 E-.16137
G1 X106.863 Y105.774 E-.02138
;WIPE_END
G1 E-.04 F2100
G1 Z38.8 F720
G1 X142.832 Y106.266 F10800
G1 Z38.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.832 Y103.33 E.09937
G1 X146.166 Y103.33 E.11283
G1 X146.166 Y106.666 E.11291
G1 X142.832 Y106.666 E.11283
G1 X142.832 Y106.326 E.01151
M204 S1000
G1 X142.425 Y107.073 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.485 Y107.073 E.13836
M204 S1000
G1 X142.529 Y106.687 F10800
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z38.8 F720
G1 X145.86 Y106.089 F10800
G1 Z38.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X145.86 Y106.361 E.00918
G1 X143.632 Y106.361 E.07544
G1 X143.137 Y105.866 E.02365
G1 X143.137 Y104.134 E.05866
G1 X143.636 Y103.635 E.02385
G1 X145.86 Y103.635 E.0753
G1 X145.86 Y103.911 E.00932
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:38.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;38.6






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X145.86 Y103.635 E-.06356
G1 X143.636 Y103.635 E-.51369
G1 X143.137 Y104.134 E-.16267
G1 X143.137 Y104.22 E-.02007
;WIPE_END
G1 E-.04 F2100
G1 Z38.8 F720
;AFTER_LAYER_CHANGE
;38.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z38.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
M73 P70 R14
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z39 F720
G1 X146.063 Y103.708 F10800
G1 Z38.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z39 F720
G1 X106.966 Y106.868 F10800
M73 Q70 S14
G1 Z38.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z39 F720
G1 X103.937 Y106.292 F10800
G1 Z38.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:38.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;38.8






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z39 F720
;AFTER_LAYER_CHANGE
;38.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z38.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z39.2 F720
G1 X146.063 Y103.708 F10800
G1 Z38.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z39.2 F720
G1 X106.966 Y106.868 F10800
G1 Z38.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z39.2 F720
G1 X103.937 Y106.292 F10800
G1 Z38.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:39
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;39






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z39.2 F720
;AFTER_LAYER_CHANGE
;39
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z39 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z39.4 F720
G1 X146.063 Y103.708 F10800
G1 Z39 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z39.4 F720
G1 X106.966 Y106.868 F10800
G1 Z39 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z39.4 F720
G1 X103.937 Y106.292 F10800
G1 Z39 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:39.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;39.2






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z39.4 F720
;AFTER_LAYER_CHANGE
;39.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z39.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
M73 P70 R13
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z39.6 F720
G1 X146.063 Y103.708 F10800
G1 Z39.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z39.6 F720
G1 X106.966 Y106.868 F10800
G1 Z39.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z39.6 F720
G1 X103.937 Y106.292 F10800
G1 Z39.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:39.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;39.4






 M104 S200 M109 S200 


;WIPE_START
M73 P71 R13
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z39.6 F720
;AFTER_LAYER_CHANGE
;39.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z39.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
M73 Q71 S14
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z39.8 F720
G1 X146.063 Y103.708 F10800
G1 Z39.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z39.8 F720
G1 X106.966 Y106.868 F10800
G1 Z39.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z39.8 F720
G1 X103.937 Y106.292 F10800
G1 Z39.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:39.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;39.6






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z39.8 F720
;AFTER_LAYER_CHANGE
;39.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z39.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
M73 Q71 S13
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z40 F720
G1 X146.063 Y103.708 F10800
G1 Z39.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z40 F720
G1 X106.966 Y106.868 F10800
G1 Z39.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z40 F720
G1 X103.937 Y106.292 F10800
G1 Z39.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:39.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;39.8






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z40 F720
;AFTER_LAYER_CHANGE
;39.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z39.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z40.2 F720
G1 X146.063 Y103.708 F10800
G1 Z39.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z40.2 F720
G1 X106.966 Y106.868 F10800
G1 Z39.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z40.2 F720
G1 X103.937 Y106.292 F10800
G1 Z39.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:40
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;40






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z40.2 F720
;AFTER_LAYER_CHANGE
;40
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z40 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z40.4 F720
G1 X146.063 Y103.708 F10800
G1 Z40 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z40.4 F720
G1 X106.966 Y106.868 F10800
G1 Z40 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
M73 P72 R13
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
M73 Q72 S13
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z40.4 F720
G1 X103.937 Y106.292 F10800
G1 Z40 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:40.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;40.2






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z40.4 F720
;AFTER_LAYER_CHANGE
;40.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z40.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z40.6 F720
G1 X146.063 Y103.708 F10800
G1 Z40.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z40.6 F720
G1 X106.966 Y106.868 F10800
G1 Z40.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z40.6 F720
G1 X103.937 Y106.292 F10800
G1 Z40.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:40.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;40.4






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z40.6 F720
;AFTER_LAYER_CHANGE
;40.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z40.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z40.8 F720
G1 X146.063 Y103.708 F10800
G1 Z40.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z40.8 F720
G1 X105.314 Y103.532 F10800
G1 Z40.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.06946
G1 X107.366 Y106.868 E.11291
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X105.254 Y103.532 E.05489
M204 S1000
G1 X104.914 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X106.122 Y103.125 E.04091
G1 X106.122 Y102.725 E.01354
G1 X106.468 Y102.725 E.01169
G1 X106.468 Y103.125 E.01354
G1 X107.676 Y103.125 E.04091
G1 X107.676 Y102.725 E.01354
G1 X107.773 Y102.725 E.00327
G1 X107.773 Y107.275 E.15401
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X104.825 Y103.125 E.05416
G1 X104.825 Y102.725 E.01354
G1 X104.914 Y102.725 E.003
G1 X104.914 Y103.065 E.01151
M204 S1000
G1 X104.943 Y103.524 F10800
;WIPE_START
G1 F8640
G1 X106.122 Y103.125 E-.27938
G1 X106.122 Y102.725 E-.09236
G1 X106.468 Y102.725 E-.07977
G1 X106.468 Y103.125 E-.09236
G1 X107.404 Y103.125 E-.21613
;WIPE_END
G1 E-.04 F2100
G1 Z40.8 F720
G1 X104.066 Y103.837 F10800
G1 Z40.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y105.669 E.04528
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:40.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;40.6






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z40.8 F720
;AFTER_LAYER_CHANGE
;40.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y106.468 F10800
G1 Z40.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.63 Y105.366 E.0373
G1 X142.508 Y105.366 E.00411
G1 X142.508 Y104.63 E.02491
G1 X142.63 Y104.63 E.00411
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y106.528 E.01151
M204 S1000
G1 X142.223 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.223 Y105.773 E.05084
G1 X142.101 Y105.773 E.00411
G1 X142.101 Y104.223 E.05247
G1 X142.223 Y104.223 E.00411
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.283 Y107.275 E.15206
M204 S1000
G1 X142.326 Y106.889 F10800
;WIPE_START
G1 F8640
G1 X142.223 Y105.773 E-.34709
G1 X142.101 Y105.773 E-.02802
G1 X142.101 Y104.223 E-.3579
G1 X142.218 Y104.223 E-.02698
;WIPE_END
G1 E-.04 F2100
G1 Z41 F720
G1 X142.773 Y105.162 F10800
G1 Z40.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.164276
G1 F900
G1 X142.773 Y104.834 E.00332
;WIPE_START
G1 F8640
G1 X142.773 Y105.162 E-.07591
;WIPE_END
G1 E-.72409 F2100
G1 Z41 F720
G1 X146.063 Y103.708 F10800
G1 Z40.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.528 E.00651
G1 X143.16 Y104.528 E.00762
G1 X143.16 Y105.468 E.0318
G1 X142.935 Y105.468 E.00762
G1 X142.935 Y105.664 E.00665
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z41 F720
G1 X105.172 Y103.532 F10800
G1 Z40.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.07424
G1 X107.366 Y104.63 E.03717
G1 X107.415 Y104.63 E.00167
G1 X107.415 Y105.366 E.02491
G1 X107.366 Y105.366 E.00167
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.297 Y103.532 E.02251
G1 X104.297 Y103.132 E.01354
G1 X104.365 Y103.132 E.00231
G1 X104.365 Y103.532 E.01354
G1 X105.112 Y103.532 E.02529
M204 S1000
G1 X104.772 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X105.483 Y103.125 E.02407
G1 X105.483 Y102.725 E.01354
G1 X105.549 Y102.725 E.00224
G1 X105.549 Y103.125 E.01354
G1 X106.271 Y103.125 E.02444
G1 X106.271 Y102.725 E.01354
G1 X106.325 Y102.725 E.00181
G1 X106.325 Y103.125 E.01354
G1 X107.036 Y103.125 E.02408
G1 X107.036 Y102.725 E.01354
G1 X107.103 Y102.725 E.00227
G1 X107.103 Y103.125 E.01354
G1 X107.773 Y103.125 E.02266
M73 P72 R12
G1 X107.773 Y104.223 E.03717
G1 X107.822 Y104.223 E.00167
G1 X107.822 Y105.773 E.05247
G1 X107.773 Y105.773 E.00167
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X103.89 Y103.125 E.02251
G1 X103.89 Y102.725 E.01354
G1 X104.772 Y102.725 E.02986
G1 X104.772 Y103.065 E.01151
M204 S1000
G1 X104.921 Y103.496 F10800
;WIPE_START
G1 F8640
G1 X105.483 Y103.125 E-.16477
G1 X105.483 Y102.725 E-.09236
G1 X105.549 Y102.725 E-.01527
G1 X105.549 Y103.125 E-.09236
G1 X106.271 Y103.125 E-.16671
G1 X106.271 Y102.725 E-.09236
G1 X106.325 Y102.725 E-.01234
G1 X106.325 Y103.125 E-.09236
G1 X106.461 Y103.125 E-.03147
;WIPE_END
G1 E-.04 F2100
G1 Z41 F720
G1 X104.066 Y103.837 F10800
G1 Z40.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.935 E.02045
G1 X107.11 Y104.935 E.00167
G1 X107.11 Y105.061 E.00424
G1 X107.06 Y105.061 E.00167
G1 X107.06 Y105.669 E.02059
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:40.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;40.8






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z41 F720
;AFTER_LAYER_CHANGE
;40.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z40.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.27 Y105.366 E.01217
G1 X142.27 Y104.63 E.02491
G1 X142.63 Y104.63 E.01217
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
M73 P73 R12
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.863 Y105.773 E.01217
G1 X141.863 Y104.223 E.05247
G1 X142.223 Y104.223 E.01217
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
M73 Q73 S13
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.077 Y105.444 F10800
;WIPE_START
G1 F8640
G1 X141.863 Y105.773 E-.08415
G1 X141.863 Y104.223 E-.3579
G1 X142.223 Y104.223 E-.083
G1 X142.223 Y103.205 E-.23496
;WIPE_END
G1 E-.04 F2100
G1 Z41.2 F720
G1 X146.063 Y106.292 F10800
G1 Z40.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y106.563 E.00917
G1 X143.834 Y106.563 E.07545
G1 X142.935 Y105.664 E.04301
G1 X142.935 Y105.596 E.00231
G1 X142.969 Y105.596 E.00114
G1 X143.288 Y105.276 E.0153
G1 X143.288 Y104.72 E.01885
G1 X142.969 Y104.4 E.0153
G1 X142.935 Y104.4 E.00114
G1 X142.935 Y104.336 E.00217
G1 X143.834 Y103.437 E.04301
G1 X146.063 Y103.437 E.07545
G1 X146.063 Y103.708 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y103.437 E-.06255
G1 X143.834 Y103.437 E-.5147
G1 X143.274 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z41.2 F720
G1 X104.032 Y103.532 F10800
G1 Z40.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.11283
G1 X107.366 Y104.63 E.03717
G1 X107.512 Y104.63 E.00494
G1 X107.512 Y105.366 E.02491
G1 X107.366 Y105.366 E.00494
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.972 Y103.532 E.01151
M204 S1000
G1 X103.303 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.089 Y103.125 E.02659
G1 X104.089 Y102.725 E.01354
G1 X104.69 Y102.725 E.02033
G1 X104.69 Y103.125 E.01354
G1 X105.392 Y103.125 E.02376
G1 X105.392 Y102.725 E.01354
G1 X105.64 Y102.725 E.0084
G1 X105.64 Y103.125 E.01354
G1 X106.946 Y103.125 E.04422
G1 X106.946 Y102.725 E.01354
G1 X107.194 Y102.725 E.00838
G1 X107.194 Y103.125 E.01354
G1 X107.773 Y103.125 E.0196
G1 X107.773 Y104.223 E.03717
G1 X107.919 Y104.223 E.00494
G1 X107.919 Y105.773 E.05247
G1 X107.773 Y105.773 E.00494
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.303 Y102.725 E.00265
G1 X103.303 Y103.065 E.01151
M204 S1000
G1 X103.329 Y103.524 F10800
;WIPE_START
G1 F8640
G1 X104.089 Y103.125 E-.18194
G1 X104.089 Y102.725 E-.09236
G1 X104.69 Y102.725 E-.13871
G1 X104.69 Y103.125 E-.09236
G1 X105.392 Y103.125 E-.16205
G1 X105.392 Y102.725 E-.09236
G1 X105.393 Y102.725 E-.00021
;WIPE_END
G1 E-.04 F2100
G1 Z41.2 F720
G1 X104.066 Y103.837 F10800
G1 Z40.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.528 E.00667
G1 X106.835 Y104.528 E.00762
G1 X106.835 Y105.468 E.0318
G1 X107.06 Y105.468 E.00762
G1 X107.06 Y105.669 E.00681
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z41.2 F720
G1 X104.389 Y103.329 F10800
G1 Z40.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.236588
G1 F900
G1 X104.389 Y102.929 E.00644
;WIPE_START
G1 F8640
G1 X104.389 Y103.329 E-.09236
;WIPE_END
G1 E-.70764 F2100
G1 Z41.2 F720
G1 X107.235 Y104.834 F10800
G1 Z40.8 F720
G1 E.8 F2100
;WIDTH:0.188966
G1 F900
G1 X107.235 Y105.162 E.00399
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:41
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;41






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X107.235 Y104.834 E-.07591
;WIPE_END
G1 E-.72409 F2100
G1 Z41.2 F720
;AFTER_LAYER_CHANGE
;41
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z41 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X142.032 Y105.366 E.02023
G1 X142.032 Y104.63 E.02491
G1 X142.63 Y104.63 E.02023
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.625 Y105.773 E.02023
G1 X141.625 Y104.223 E.05247
G1 X142.223 Y104.223 E.02023
M73 Q73 S12
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X141.625 Y105.773 E-.13867
G1 X141.625 Y104.223 E-.3579
G1 X142.223 Y104.223 E-.13797
G1 X142.223 Y103.68 E-.12546
;WIPE_END
G1 E-.04 F2100
G1 Z41.4 F720
G1 X142.688 Y104.752 F10800
G1 Z41 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.531415
G1 F900
G1 X143.064 Y105.129 E.02165
;WIPE_START
G1 F8640
G1 X142.688 Y104.752 E-.12306
;WIPE_END
G1 E-.67694 F2100
G1 Z41.4 F720
G1 X146.063 Y106.292 F10800
G1 Z41 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y106.563 E.00917
G1 X143.834 Y106.563 E.07545
G1 X142.935 Y105.664 E.04301
G1 X142.935 Y105.596 E.00231
G1 X142.969 Y105.596 E.00114
G1 X143.288 Y105.276 E.0153
G1 X143.288 Y104.72 E.01885
G1 X142.969 Y104.4 E.0153
G1 X142.935 Y104.4 E.00114
G1 X142.935 Y104.336 E.00217
G1 X143.834 Y103.437 E.04301
G1 X146.063 Y103.437 E.07545
G1 X146.063 Y103.708 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y103.437 E-.06256
G1 X143.834 Y103.437 E-.5147
G1 X143.274 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z41.4 F720
G1 X104.032 Y103.532 F10800
G1 Z41 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.11283
G1 X107.366 Y104.63 E.03717
G1 X107.623 Y104.63 E.0087
G1 X107.623 Y105.366 E.02491
G1 X107.366 Y105.366 E.0087
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.972 Y103.532 E.01151
M204 S1000
G1 X103.519 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.326 Y103.125 E.02732
G1 X104.326 Y102.725 E.01354
G1 X104.651 Y102.725 E.01101
G1 X104.651 Y103.125 E.01354
G1 X105.351 Y103.125 E.02366
G1 X105.351 Y102.725 E.01354
G1 X105.68 Y102.725 E.01114
G1 X105.68 Y103.125 E.01354
G1 X106.905 Y103.125 E.04148
G1 X106.905 Y102.725 E.01354
G1 X107.234 Y102.725 E.01112
G1 X107.234 Y103.125 E.01354
G1 X107.773 Y103.125 E.01824
G1 X107.773 Y104.223 E.03717
G1 X108.03 Y104.223 E.0087
G1 X108.03 Y105.773 E.05247
G1 X107.773 Y105.773 E.0087
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.519 Y102.725 E.00996
G1 X103.519 Y103.065 E.01151
M204 S1000
G1 X103.603 Y103.516 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:41.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;41.2






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z41.4 F720
;AFTER_LAYER_CHANGE
;41.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z41.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X141.794 Y105.366 E.02829
G1 X141.794 Y104.63 E.02491
G1 X142.63 Y104.63 E.02828
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.387 Y105.773 E.02828
G1 X141.387 Y104.223 E.05247
G1 X142.223 Y104.223 E.02828
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
G1 X141.998 Y104.998
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X142.833 Y104.998 E.02284
;WIPE_START
G1 F8640
G1 X141.998 Y104.998 E-.19294
;WIPE_END
G1 E-.60706 F2100
G1 Z41.6 F720
G1 X146.063 Y103.708 F10800
G1 Z41.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z41.6 F720
G1 X104.154 Y103.532 F10800
G1 Z41.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.10869
G1 X107.366 Y104.63 E.03717
G1 X107.742 Y104.63 E.01274
G1 X107.742 Y105.366 E.02491
G1 X107.366 Y105.366 E.01274
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.094 Y103.532 E.01565
M204 S1000
G1 X103.754 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.54 Y103.125 E.0266
G1 X104.54 Y102.725 E.01354
G1 X104.641 Y102.725 E.00341
G1 X104.641 Y103.125 E.01354
G1 X105.341 Y103.125 E.02368
G1 X105.341 Y102.725 E.01354
G1 X105.691 Y102.725 E.01185
G1 X105.691 Y103.125 E.01354
G1 X106.896 Y103.125 E.04079
G1 X106.896 Y102.725 E.01354
G1 X107.245 Y102.725 E.01181
G1 X107.245 Y103.125 E.01354
G1 X107.773 Y103.125 E.01787
G1 X107.773 Y104.223 E.03717
G1 X108.149 Y104.223 E.01274
G1 X108.149 Y105.773 E.05247
G1 X107.773 Y105.773 E.01274
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.754 Y102.725 E.01792
G1 X103.754 Y103.065 E.01151
M204 S1000
G1 X103.876 Y103.506 F10800
G1 X103.49 Y102.929
;TYPE:Gap fill
;WIDTH:0.165292
G1 F900
G1 X103.49 Y103.329 E.00407
G1 X104.066 Y103.837 F10800
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:41.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;41.4






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z41.6 F720
;AFTER_LAYER_CHANGE
;41.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z41.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X141.556 Y105.366 E.03634
G1 X141.556 Y104.63 E.02491
G1 X142.63 Y104.63 E.03634
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.149 Y105.773 E.03634
G1 X141.149 Y104.223 E.05247
G1 X142.223 Y104.223 E.03634
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
G1 X141.76 Y104.998
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X142.833 Y104.998 E.02935
;WIPE_START
G1 F8640
G1 X141.76 Y104.998 E-.24792
;WIPE_END
G1 E-.55208 F2100
G1 Z41.8 F720
G1 X146.063 Y103.708 F10800
G1 Z41.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
M73 P74 R12
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
M73 Q74 S12
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z41.8 F720
G1 X104.351 Y103.532 F10800
G1 Z41.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.10205
G1 X107.366 Y104.63 E.03717
G1 X107.87 Y104.63 E.01708
G1 X107.87 Y105.366 E.02491
G1 X107.366 Y105.366 E.01708
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.291 Y103.532 E.02229
M204 S1000
G1 X103.951 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X105.342 Y103.125 E.0471
G1 X105.342 Y102.725 E.01354
G1 X105.691 Y102.725 E.0118
G1 X105.691 Y103.125 E.01354
G1 X106.896 Y103.125 E.0408
G1 X106.896 Y102.725 E.01354
G1 X107.245 Y102.725 E.0118
G1 X107.245 Y103.125 E.01354
G1 X107.773 Y103.125 E.01787
G1 X107.773 Y104.223 E.03717
G1 X108.277 Y104.223 E.01708
G1 X108.277 Y105.773 E.05247
G1 X107.773 Y105.773 E.01708
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.951 Y102.725 E.02456
G1 X103.951 Y103.065 E.01151
M204 S1000
G1 X104.09 Y103.5 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:41.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;41.6






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z41.8 F720
;AFTER_LAYER_CHANGE
;41.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z41.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X141.318 Y105.366 E.0444
G1 X141.318 Y104.63 E.02491
G1 X142.63 Y104.63 E.0444
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.911 Y105.773 E.0444
G1 X140.911 Y104.223 E.05247
G1 X142.223 Y104.223 E.0444
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.911 Y105.773 E-.30321
G1 X140.911 Y104.223 E-.3579
G1 X141.339 Y104.223 E-.09889
;WIPE_END
G1 E-.04 F2100
G1 Z42 F720
G1 X142.833 Y104.998 F10800
G1 Z41.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X141.521 Y104.998 E.03586
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.30289
;WIPE_END
G1 E-.49711 F2100
G1 Z42 F720
G1 X146.063 Y103.708 F10800
G1 Z41.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z42 F720
G1 X104.487 Y103.532 F10800
G1 Z41.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.09744
G1 X107.366 Y104.63 E.03717
G1 X108.011 Y104.63 E.02186
G1 X108.011 Y105.366 E.02491
G1 X107.366 Y105.366 E.02186
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X103.68 Y103.132 E.00161
G1 X103.68 Y103.532 E.01354
G1 X104.427 Y103.532 E.02529
M204 S1000
G1 X104.087 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X105.356 Y103.125 E.04295
G1 X105.356 Y102.725 E.01354
G1 X105.679 Y102.725 E.01094
G1 X105.679 Y103.125 E.01354
G1 X106.91 Y103.125 E.04166
G1 X106.91 Y102.725 E.01354
G1 X107.231 Y102.725 E.01088
G1 X107.231 Y103.125 E.01354
G1 X107.773 Y103.125 E.01833
G1 X107.773 Y104.223 E.03717
G1 X108.418 Y104.223 E.02186
G1 X108.418 Y105.773 E.05247
G1 X107.773 Y105.773 E.02186
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X104.087 Y102.725 E.02917
G1 X104.087 Y103.065 E.01151
M204 S1000
G1 X104.235 Y103.497 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X106.728 Y104.72 E.01559
G1 X106.728 Y105.276 E.01885
G1 X107.06 Y105.596 E.01559
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z42 F720
G1 X107.385 Y104.752 F10800
G1 Z41.6 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.531415
G1 F900
G1 X106.953 Y105.184 E.02482
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:41.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;41.8






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X107.385 Y104.752 E-.14111
;WIPE_END
G1 E-.65889 F2100
G1 Z42 F720
;AFTER_LAYER_CHANGE
;41.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z41.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X141.08 Y105.366 E.05246
G1 X141.08 Y104.63 E.02491
G1 X142.63 Y104.63 E.05246
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.673 Y105.773 E.05246
G1 X140.673 Y104.223 E.05247
G1 X142.223 Y104.223 E.05246
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.673 Y105.773 E-.35814
G1 X140.673 Y104.223 E-.3579
G1 X140.863 Y104.223 E-.04396
;WIPE_END
G1 E-.04 F2100
G1 Z42.2 F720
G1 X142.833 Y104.998 F10800
G1 Z41.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X141.283 Y104.998 E.04237
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.35787
;WIPE_END
G1 E-.44213 F2100
G1 Z42.2 F720
G1 X146.063 Y103.708 F10800
G1 Z41.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z42.2 F720
G1 X104.516 Y103.532 F10800
G1 Z41.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.09646
G1 X107.366 Y104.63 E.03717
G1 X108.167 Y104.63 E.02713
G1 X108.167 Y105.366 E.02491
G1 X107.366 Y105.366 E.02713
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.456 Y103.532 E.02788
M204 S1000
G1 X104.116 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X105.403 Y103.125 E.04357
G1 X105.403 Y102.725 E.01354
G1 X105.631 Y102.725 E.0077
G1 X105.631 Y103.125 E.01354
G1 X106.957 Y103.125 E.0449
G1 X106.957 Y102.725 E.01354
G1 X107.184 Y102.725 E.0077
G1 X107.184 Y103.125 E.01354
G1 X107.773 Y103.125 E.01991
G1 X107.773 Y104.223 E.03717
G1 X108.574 Y104.223 E.02713
G1 X108.574 Y105.773 E.05247
G1 X107.773 Y105.773 E.02713
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X103.812 Y103.125 E.01987
G1 X103.812 Y102.725 E.01354
G1 X104.116 Y102.725 E.01028
G1 X104.116 Y103.065 E.01151
M204 S1000
G1 X104.202 Y103.516 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z42.2 F720
G1 X107.162 Y104.998 F10800
G1 Z41.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X107.963 Y104.998 E.02191
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:42
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;42






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.18506
;WIPE_END
G1 E-.61494 F2100
G1 Z42.2 F720
;AFTER_LAYER_CHANGE
;42
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z42 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X140.842 Y105.366 E.06052
G1 X140.842 Y104.63 E.02491
G1 X142.63 Y104.63 E.06052
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.435 Y105.773 E.06052
G1 X140.435 Y104.223 E.05247
G1 X142.223 Y104.223 E.06052
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.435 Y105.773 E-.41308
G1 X140.435 Y104.271 E-.34692
;WIPE_END
G1 E-.04 F2100
G1 Z42.4 F720
G1 X142.833 Y104.998 F10800
G1 Z42 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X141.045 Y104.998 E.04888
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.41284
;WIPE_END
G1 E-.38716 F2100
G1 Z42.4 F720
G1 X146.063 Y103.708 F10800
G1 Z42 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
M73 P74 R11
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z42.4 F720
G1 X104.42 Y103.532 F10800
G1 Z42 F720
M73 P75 R11
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.09971
G1 X107.366 Y104.63 E.03717
G1 X108.335 Y104.63 E.03283
G1 X108.335 Y105.366 E.02491
M73 Q75 S12
G1 X107.366 Y105.366 E.03283
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.36 Y103.532 E.02464
M204 S1000
G1 X104.02 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.765 Y103.125 E.02522
G1 X104.765 Y102.725 E.01354
G1 X104.777 Y103.125 E.01355
G1 X105.505 Y103.125 E.02463
G1 X105.505 Y102.725 E.01354
G1 X105.524 Y102.725 E.00065
G1 X105.524 Y103.125 E.01354
G1 X106.254 Y103.125 E.02471
G1 X106.254 Y102.725 E.01354
G1 X106.33 Y102.725 E.00259
G1 X106.33 Y103.125 E.01354
G1 X107.059 Y103.125 E.02466
G1 X107.059 Y102.725 E.01354
G1 X107.078 Y102.725 E.00064
G1 X107.078 Y103.125 E.01354
G1 X107.773 Y103.125 E.02352
G1 X107.773 Y104.223 E.03717
G1 X108.742 Y104.223 E.03283
G1 X108.742 Y105.773 E.05247
G1 X107.773 Y105.773 E.03283
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X103.913 Y103.125 E.0233
G1 X103.913 Y102.725 E.01354
G1 X104.02 Y102.725 E.00361
G1 X104.02 Y103.065 E.01151
M204 S1000
G1 X104.055 Y103.523 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z42.4 F720
G1 X107.162 Y104.998 F10800
G1 Z42 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.132 Y104.998 E.02651
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:42.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;42.2






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.22392
;WIPE_END
G1 E-.57608 F2100
G1 Z42.4 F720
;AFTER_LAYER_CHANGE
;42.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z42.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X140.604 Y105.366 E.06858
G1 X140.604 Y104.63 E.02491
G1 X142.63 Y104.63 E.06858
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.197 Y105.773 E.06858
G1 X140.197 Y104.223 E.05247
G1 X142.223 Y104.223 E.06858
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.197 Y105.773 E-.46802
G1 X140.197 Y104.508 E-.29198
;WIPE_END
G1 E-.04 F2100
G1 Z42.6 F720
G1 X142.833 Y104.998 F10800
G1 Z42.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.807 Y104.998 E.05539
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.46782
;WIPE_END
G1 E-.33218 F2100
G1 Z42.6 F720
G1 X146.063 Y103.708 F10800
G1 Z42.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z42.6 F720
G1 X104.032 Y103.532 F10800
G1 Z42.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.11283
G1 X107.366 Y104.63 E.03717
G1 X108.518 Y104.63 E.03902
G1 X108.518 Y105.366 E.02491
G1 X107.366 Y105.366 E.03902
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.972 Y103.532 E.01151
M204 S1000
G1 X103.358 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.579 Y103.125 E.04134
G1 X104.579 Y102.725 E.01354
G1 X104.945 Y102.725 E.01237
G1 X104.945 Y103.125 E.01354
G1 X106.088 Y103.125 E.03869
G1 X106.088 Y102.725 E.01354
M73 Q75 S11
G1 X106.499 Y102.725 E.01391
G1 X106.499 Y103.125 E.01354
G1 X107.64 Y103.125 E.03863
G1 X107.64 Y102.725 E.01354
G1 X107.773 Y102.725 E.00449
G1 X107.773 Y104.223 E.05071
G1 X108.925 Y104.223 E.03902
G1 X108.925 Y105.773 E.05247
G1 X107.773 Y105.773 E.03902
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.358 Y102.725 E.0045
G1 X103.358 Y103.065 E.01151
M204 S1000
G1 X103.401 Y103.523 F10800
;WIPE_START
G1 F8640
G1 X104.579 Y103.125 E-.28235
G1 X104.579 Y102.725 E-.09236
G1 X104.945 Y102.725 E-.08439
G1 X104.945 Y103.125 E-.09236
G1 X105.848 Y103.125 E-.20854
;WIPE_END
G1 E-.04 F2100
G1 Z42.6 F720
G1 X104.066 Y103.837 F10800
G1 Z42.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z42.6 F720
G1 X107.162 Y104.998 F10800
G1 Z42.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.315 Y104.998 E.03151
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:42.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;42.4






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.26615
;WIPE_END
G1 E-.53385 F2100
G1 Z42.6 F720
;AFTER_LAYER_CHANGE
;42.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z42.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X140.366 Y105.366 E.07664
G1 X140.366 Y104.63 E.02491
G1 X142.63 Y104.63 E.07664
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.959 Y105.773 E.07664
G1 X139.959 Y104.223 E.05247
G1 X142.223 Y104.223 E.07664
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.959 Y105.773 E-.52298
G1 X139.959 Y104.746 E-.23702
;WIPE_END
G1 E-.04 F2100
G1 Z42.8 F720
G1 X142.833 Y104.998 F10800
G1 Z42.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.569 Y104.998 E.06189
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.52279
;WIPE_END
G1 E-.27721 F2100
G1 Z42.8 F720
G1 X146.063 Y103.708 F10800
G1 Z42.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z42.8 F720
G1 X108.173 Y104.63 F10800
G1 Z42.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X108.721 Y104.63 E.01855
G1 X108.721 Y105.366 E.02491
G1 X107.366 Y105.366 E.04587
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.128 Y104.223 E.04587
G1 X109.128 Y105.773 E.05247
G1 X107.773 Y105.773 E.04587
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.128 Y104.223 E-.31319
G1 X109.128 Y105.773 E-.3579
G1 X108.743 Y105.773 E-.08891
;WIPE_END
G1 E-.04 F2100
G1 Z42.8 F720
G1 X107.162 Y104.998 F10800
G1 Z42.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.517 Y104.998 E.03704
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.31288
;WIPE_END
G1 E-.48712 F2100
G1 Z42.8 F720
G1 X103.937 Y103.708 F10800
G1 Z42.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:42.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;42.6






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z42.8 F720
;AFTER_LAYER_CHANGE
;42.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z42.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X140.128 Y105.366 E.0847
G1 X140.128 Y104.63 E.02491
G1 X142.63 Y104.63 E.0847
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.72 Y105.773 E.0847
G1 X139.72 Y104.223 E.05247
G1 X142.223 Y104.223 E.0847
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.72 Y105.773 E-.57793
G1 X139.72 Y104.984 E-.18207
;WIPE_END
G1 E-.04 F2100
G1 Z43 F720
G1 X142.833 Y104.998 F10800
G1 Z42.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.331 Y104.998 E.0684
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.57777
;WIPE_END
G1 E-.22223 F2100
G1 Z43 F720
M73 P76 R11
G1 X146.063 Y103.708 F10800
G1 Z42.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
M73 Q76 S11
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z43 F720
G1 X108.173 Y104.63 F10800
G1 Z42.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X108.944 Y104.63 E.0261
G1 X108.944 Y105.366 E.02491
G1 X107.366 Y105.366 E.05342
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.351 Y104.223 E.05342
G1 X109.351 Y105.773 E.05247
G1 X107.773 Y105.773 E.05342
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.351 Y104.223 E-.36469
G1 X109.351 Y105.773 E-.3579
G1 X109.189 Y105.773 E-.03741
;WIPE_END
G1 E-.04 F2100
G1 Z43 F720
G1 X107.162 Y104.998 F10800
G1 Z42.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.74 Y104.998 E.04314
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.36442
;WIPE_END
G1 E-.43558 F2100
G1 Z43 F720
G1 X103.937 Y103.708 F10800
G1 Z42.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:42.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;42.8






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z43 F720
;AFTER_LAYER_CHANGE
;42.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z42.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.889 Y105.366 E.09276
G1 X139.889 Y104.63 E.02491
G1 X142.63 Y104.63 E.09276
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.482 Y105.773 E.09276
G1 X139.482 Y104.223 E.05247
G1 X142.223 Y104.223 E.09276
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.482 Y105.773 E-.63289
G1 X139.482 Y105.223 E-.12711
;WIPE_END
G1 E-.04 F2100
G1 Z43.2 F720
G1 X142.833 Y104.998 F10800
G1 Z42.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.093 Y104.998 E.07491
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.63274
;WIPE_END
G1 E-.16726 F2100
G1 Z43.2 F720
G1 X146.063 Y103.708 F10800
G1 Z42.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z43.2 F720
G1 X108.173 Y104.63 F10800
G1 Z42.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.192 Y104.63 E.03451
G1 X109.192 Y105.366 E.02491
G1 X107.366 Y105.366 E.06183
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.599 Y104.223 E.06183
G1 X109.599 Y105.773 E.05247
G1 X107.773 Y105.773 E.06183
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.599 Y104.223 E-.42202
G1 X109.599 Y105.687 E-.33798
;WIPE_END
G1 E-.04 F2100
G1 Z43.2 F720
G1 X107.162 Y104.998 F10800
G1 Z42.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.989 Y104.998 E.04994
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.42179
;WIPE_END
G1 E-.37821 F2100
G1 Z43.2 F720
G1 X103.937 Y103.708 F10800
G1 Z42.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:43
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;43






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z43.2 F720
;AFTER_LAYER_CHANGE
;43
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z43 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.651 Y105.366 E.10082
G1 X139.651 Y104.63 E.02491
G1 X142.63 Y104.63 E.10081
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.244 Y105.773 E.10081
G1 X139.244 Y104.223 E.05247
G1 X142.223 Y104.223 E.10081
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.244 Y105.773 E-.68786
G1 X139.244 Y105.461 E-.07214
;WIPE_END
G1 E-.04 F2100
G1 Z43.4 F720
G1 X142.833 Y104.998 F10800
G1 Z43 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.855 Y104.998 E.08142
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.68772
;WIPE_END
G1 E-.11228 F2100
G1 Z43.4 F720
G1 X146.063 Y103.708 F10800
G1 Z43 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z43.4 F720
G1 X108.173 Y104.63 F10800
G1 Z43 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.469 Y104.63 E.04389
G1 X109.469 Y105.366 E.02491
G1 X107.366 Y105.366 E.07121
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.876 Y104.223 E.07121
G1 X109.876 Y105.773 E.05247
G1 X107.773 Y105.773 E.07121
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.876 Y104.223 E-.48595
G1 X109.876 Y105.41 E-.27405
;WIPE_END
G1 E-.04 F2100
G1 Z43.4 F720
G1 X107.162 Y104.998 F10800
G1 Z43 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.266 Y104.998 E.05751
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.48575
;WIPE_END
G1 E-.31425 F2100
G1 Z43.4 F720
G1 X103.937 Y103.708 F10800
G1 Z43 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:43.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;43.2






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z43.4 F720
;AFTER_LAYER_CHANGE
;43.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z43.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.413 Y105.366 E.10887
G1 X139.413 Y104.63 E.02491
G1 X142.63 Y104.63 E.10887
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
M73 P77 R11
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.006 Y105.773 E.10887
G1 X139.006 Y104.223 E.05247
M73 Q77 S11
G1 X142.223 Y104.223 E.10887
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
M73 P77 R10
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.006 Y105.773 E-.74282
G1 X139.006 Y105.699 E-.01718
;WIPE_END
G1 E-.04 F2100
G1 Z43.6 F720
G1 X142.833 Y104.998 F10800
G1 Z43.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.617 Y104.998 E.08793
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.74269
;WIPE_END
G1 E-.05731 F2100
G1 Z43.6 F720
G1 X146.063 Y103.708 F10800
G1 Z43.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z43.6 F720
G1 X108.173 Y104.63 F10800
G1 Z43.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.788 Y104.63 E.05468
G1 X109.788 Y105.366 E.02491
G1 X107.366 Y105.366 E.082
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X110.195 Y104.223 E.082
G1 X110.195 Y105.773 E.05247
G1 X107.773 Y105.773 E.082
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X110.195 Y104.223 E-.55951
G1 X110.195 Y105.091 E-.20049
;WIPE_END
G1 E-.04 F2100
G1 Z43.6 F720
G1 X107.162 Y104.998 F10800
G1 Z43.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.584 Y104.998 E.06622
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.55934
;WIPE_END
G1 E-.24066 F2100
G1 Z43.6 F720
G1 X103.937 Y103.708 F10800
G1 Z43.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:43.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;43.4






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z43.6 F720
;AFTER_LAYER_CHANGE
;43.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z43.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.175 Y105.366 E.11693
G1 X139.175 Y104.63 E.02491
G1 X142.63 Y104.63 E.11693
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X138.768 Y105.773 E.11693
G1 X138.768 Y104.223 E.05247
G1 X142.223 Y104.223 E.11693
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
M73 Q77 S10
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X138.932 Y105.776 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z43.8 F720
G1 X142.833 Y104.998 F10800
G1 Z43.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.379 Y104.998 E.09444
;WIPE_START
G1 F8640
G1 X142.67 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z43.8 F720
G1 X146.063 Y103.708 F10800
G1 Z43.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z43.8 F720
G1 X108.173 Y104.63 F10800
G1 Z43.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X110.16 Y104.63 E.06727
G1 X110.16 Y105.366 E.02491
G1 X107.366 Y105.366 E.09459
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X110.567 Y104.223 E.09459
G1 X110.567 Y105.773 E.05247
G1 X107.773 Y105.773 E.09459
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X110.567 Y104.223 E-.64542
G1 X110.567 Y104.719 E-.11458
;WIPE_END
G1 E-.04 F2100
G1 Z43.8 F720
G1 X107.162 Y104.998 F10800
G1 Z43.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.957 Y104.998 E.0764
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.64527
;WIPE_END
G1 E-.15473 F2100
G1 Z43.8 F720
G1 X103.937 Y103.708 F10800
G1 Z43.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:43.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;43.6






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z43.8 F720
;AFTER_LAYER_CHANGE
;43.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.373 Y105.366 F10800
G1 Z43.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F927
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X110.992 Y104.63 E.12276
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X138.343 Y104.63 E.87951
;TYPE:Perimeter
;WIDTH:0.45
G1 F927
G1 X142.63 Y104.63 E.1451
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.366 E.05084
G1 X138.343 Y105.366 E.1451
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X110.992 Y105.366 E.87951
;TYPE:Perimeter
;WIDTH:0.45
G1 F927
G1 X107.433 Y105.366 E.12049
M204 S1000
G1 X107.773 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F927
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.223 E.05071
G1 X110.992 Y104.223 E.10898
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X138.343 Y104.223 E.87951
;TYPE:External perimeter
;WIDTH:0.45
G1 F927
G1 X142.223 Y104.223 E.13132
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
M73 P78 R10
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X138.343 Y105.773 E.13132
;TYPE:Overhang perimeter
;WIDTH:0.429646
M73 Q78 S10
G1 F1500
G1 X110.992 Y105.773 E.87951
;TYPE:External perimeter
;WIDTH:0.45
G1 F927
G1 X107.833 Y105.773 E.10695
M204 S1000
;WIPE_START
G1 F8640
G1 X107.773 Y107.275 E-.34709
G1 X105.984 Y107.275 E-.41291
;WIPE_END
G1 E-.04 F2100
G1 Z44 F720
G1 X107.162 Y104.998 F10800
G1 Z43.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F927
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z44 F720
G1 X146.063 Y103.708 F10800
G1 Z43.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F927
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z44 F720
G1 X103.937 Y106.292 F10800
G1 Z43.6 F720
G1 E.8 F2100
G1 F927
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:43.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;43.8






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z44 F720
;AFTER_LAYER_CHANGE
;43.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z43.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F1087
G1 X142.63 Y104.63 E1.16633
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.366 E.05084
G1 X107.366 Y105.366 E1.19365
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F1087
G1 X142.223 Y104.223 E1.16609
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X107.773 Y105.773 E1.16609
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X111.064 Y104.169 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z44.2 F720
G1 X107.162 Y104.998 F10800
G1 Z43.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F1087
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z44.2 F720
G1 X146.063 Y103.708 F10800
G1 Z43.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F1087
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z44.2 F720
G1 X103.937 Y106.292 F10800
G1 Z43.8 F720
G1 E.8 F2100
G1 F1087
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:44
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;44






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z44.2 F720
;AFTER_LAYER_CHANGE
;44
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z44 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F1087
G1 X142.63 Y104.63 E1.16633
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.366 E.05084
G1 X107.366 Y105.366 E1.19365
G1 X107.366 Y106.868 E.05084
M73 P79 R10
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
M73 Q79 S10
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F1087
G1 X142.223 Y104.223 E1.16609
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X107.773 Y105.773 E1.16609
G1 X107.773 Y107.275 E.05084
M73 P79 R9
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X111.064 Y104.169 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z44.4 F720
G1 X107.162 Y104.998 F10800
G1 Z44 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F1087
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z44.4 F720
G1 X146.063 Y103.708 F10800
G1 Z44 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F1087
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z44.4 F720
G1 X103.937 Y106.292 F10800
G1 Z44 F720
G1 E.8 F2100
G1 F1087
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:44.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;44.2






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z44.4 F720
;AFTER_LAYER_CHANGE
;44.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z44.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z44.6 F720
G1 X104.135 Y103.906 F10800
G1 Z44.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X104.135 Y103.635 E.00916
G1 X106.364 Y103.635 E.07546
G1 X106.863 Y104.134 E.02385
G1 X106.863 Y105.866 E.05866
G1 X106.368 Y106.361 E.02366
G1 X104.135 Y106.361 E.0756
G1 X104.135 Y106.094 E.00902
;WIPE_START
G1 F8640
G1 X104.135 Y106.361 E-.06155
G1 X106.368 Y106.361 E-.51571
M73 Q79 S9
G1 X106.863 Y105.866 E-.16137
G1 X106.863 Y105.774 E-.02138
;WIPE_END
G1 E-.04 F2100
G1 Z44.6 F720
G1 X142.832 Y106.266 F10800
G1 Z44.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.832 Y103.33 E.09937
G1 X146.166 Y103.33 E.11283
G1 X146.166 Y106.666 E.11291
G1 X142.832 Y106.666 E.11283
G1 X142.832 Y106.326 E.01151
M204 S1000
G1 X142.425 Y107.073 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.485 Y107.073 E.13836
M204 S1000
G1 X142.529 Y106.687 F10800
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z44.6 F720
G1 X145.86 Y106.089 F10800
G1 Z44.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X145.86 Y106.361 E.00918
G1 X143.632 Y106.361 E.07544
G1 X143.137 Y105.866 E.02365
G1 X143.137 Y104.134 E.05866
G1 X143.636 Y103.635 E.02385
G1 X145.86 Y103.635 E.0753
G1 X145.86 Y103.911 E.00932
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:44.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;44.4






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X145.86 Y103.635 E-.06356
G1 X143.636 Y103.635 E-.51369
G1 X143.137 Y104.134 E-.16267
G1 X143.137 Y104.22 E-.02007
;WIPE_END
G1 E-.04 F2100
G1 Z44.6 F720
;AFTER_LAYER_CHANGE
;44.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z44.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z44.8 F720
G1 X104.135 Y103.906 F10800
G1 Z44.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X104.135 Y103.635 E.00916
G1 X106.364 Y103.635 E.07546
G1 X106.863 Y104.134 E.02385
G1 X106.863 Y105.866 E.05866
G1 X106.368 Y106.361 E.02366
G1 X104.135 Y106.361 E.0756
G1 X104.135 Y106.094 E.00902
;WIPE_START
G1 F8640
G1 X104.135 Y106.361 E-.06155
G1 X106.368 Y106.361 E-.51571
G1 X106.863 Y105.866 E-.16137
G1 X106.863 Y105.774 E-.02138
;WIPE_END
G1 E-.04 F2100
G1 Z44.8 F720
G1 X142.832 Y106.266 F10800
G1 Z44.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.832 Y103.33 E.09937
G1 X146.166 Y103.33 E.11283
G1 X146.166 Y106.666 E.11291
G1 X142.832 Y106.666 E.11283
G1 X142.832 Y106.326 E.01151
M204 S1000
G1 X142.425 Y107.073 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.485 Y107.073 E.13836
M204 S1000
G1 X142.529 Y106.687 F10800
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z44.8 F720
G1 X145.86 Y106.089 F10800
G1 Z44.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X145.86 Y106.361 E.00918
G1 X143.632 Y106.361 E.07544
G1 X143.137 Y105.866 E.02365
G1 X143.137 Y104.134 E.05866
G1 X143.636 Y103.635 E.02385
G1 X145.86 Y103.635 E.0753
G1 X145.86 Y103.911 E.00932
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:44.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;44.6






 M104 S200 M109 S200 


;WIPE_START
G1 F8640
G1 X145.86 Y103.635 E-.06356
G1 X143.636 Y103.635 E-.51369
G1 X143.137 Y104.134 E-.16267
G1 X143.137 Y104.22 E-.02007
;WIPE_END
G1 E-.04 F2100
G1 Z44.8 F720
;AFTER_LAYER_CHANGE
;44.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z44.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
M73 P80 R9
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z45 F720
G1 X104.135 Y103.906 F10800
G1 Z44.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X104.135 Y103.635 E.00916
G1 X106.364 Y103.635 E.07546
G1 X106.863 Y104.134 E.02385
G1 X106.863 Y105.866 E.05866
G1 X106.368 Y106.361 E.02366
G1 X104.135 Y106.361 E.0756
G1 X104.135 Y106.094 E.00902
;WIPE_START
M73 Q80 S9
G1 F8640
G1 X104.135 Y106.361 E-.06155
G1 X106.368 Y106.361 E-.51571
G1 X106.863 Y105.866 E-.16137
G1 X106.863 Y105.774 E-.02138
;WIPE_END
G1 E-.04 F2100
G1 Z45 F720
G1 X142.832 Y106.266 F10800
G1 Z44.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.832 Y103.33 E.09937
G1 X146.166 Y103.33 E.11283
G1 X146.166 Y106.666 E.11291
G1 X142.832 Y106.666 E.11283
G1 X142.832 Y106.326 E.01151
M204 S1000
G1 X142.425 Y107.073 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.485 Y107.073 E.13836
M204 S1000
G1 X142.529 Y106.687 F10800
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z45 F720
G1 X145.86 Y106.089 F10800
G1 Z44.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X145.86 Y106.361 E.00918
G1 X143.632 Y106.361 E.07544
G1 X143.137 Y105.866 E.02365
G1 X143.137 Y104.134 E.05866
G1 X143.636 Y103.635 E.02385
G1 X145.86 Y103.635 E.0753
G1 X145.86 Y103.911 E.00932
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:44.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;44.8







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X145.86 Y103.635 E-.06356
G1 X143.636 Y103.635 E-.51369
G1 X143.137 Y104.134 E-.16267
G1 X143.137 Y104.22 E-.02007
;WIPE_END
G1 E-.04 F2100
G1 Z45 F720
;AFTER_LAYER_CHANGE
;44.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z44.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z45.2 F720
G1 X146.063 Y103.708 F10800
G1 Z44.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z45.2 F720
G1 X106.966 Y106.868 F10800
G1 Z44.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z45.2 F720
G1 X103.937 Y106.292 F10800
G1 Z44.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:45
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;45







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z45.2 F720
;AFTER_LAYER_CHANGE
;45
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z45 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z45.4 F720
G1 X146.063 Y103.708 F10800
G1 Z45 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z45.4 F720
G1 X106.966 Y106.868 F10800
G1 Z45 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z45.4 F720
G1 X103.937 Y106.292 F10800
G1 Z45 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:45.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;45.2







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z45.4 F720
;AFTER_LAYER_CHANGE
;45.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z45.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z45.6 F720
G1 X146.063 Y103.708 F10800
G1 Z45.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z45.6 F720
G1 X106.966 Y106.868 F10800
G1 Z45.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z45.6 F720
G1 X103.937 Y106.292 F10800
G1 Z45.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:45.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;45.4







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z45.6 F720
;AFTER_LAYER_CHANGE
;45.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z45.4 F720
M73 P81 R9
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
M73 Q81 S9
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z45.8 F720
G1 X146.063 Y103.708 F10800
G1 Z45.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z45.8 F720
G1 X106.966 Y106.868 F10800
G1 Z45.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z45.8 F720
G1 X103.937 Y106.292 F10800
G1 Z45.4 F720
G1 E.8 F2100
;TYPE:Internal infill
M73 P81 R8
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:45.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;45.6







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z45.8 F720
;AFTER_LAYER_CHANGE
;45.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z45.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z46 F720
G1 X146.063 Y103.708 F10800
G1 Z45.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z46 F720
G1 X106.966 Y106.868 F10800
G1 Z45.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z46 F720
G1 X103.937 Y106.292 F10800
G1 Z45.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:45.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;45.8







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z46 F720
;AFTER_LAYER_CHANGE
;45.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z45.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
M73 Q81 S8
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z46.2 F720
G1 X146.063 Y103.708 F10800
G1 Z45.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z46.2 F720
G1 X106.966 Y106.868 F10800
G1 Z45.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z46.2 F720
G1 X103.937 Y106.292 F10800
G1 Z45.8 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:46
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;46







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z46.2 F720
;AFTER_LAYER_CHANGE
;46
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z46 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z46.4 F720
G1 X146.063 Y103.708 F10800
G1 Z46 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z46.4 F720
G1 X106.966 Y106.868 F10800
G1 Z46 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
M73 P82 R8
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
M73 Q82 S8
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z46.4 F720
G1 X103.937 Y106.292 F10800
G1 Z46 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:46.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;46.2







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z46.4 F720
;AFTER_LAYER_CHANGE
;46.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z46.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z46.6 F720
G1 X146.063 Y103.708 F10800
G1 Z46.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z46.6 F720
G1 X106.966 Y106.868 F10800
G1 Z46.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z46.6 F720
G1 X103.937 Y106.292 F10800
G1 Z46.2 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:46.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;46.4







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z46.6 F720
;AFTER_LAYER_CHANGE
;46.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z46.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z46.8 F720
G1 X146.063 Y103.708 F10800
G1 Z46.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z46.8 F720
G1 X106.966 Y106.868 F10800
G1 Z46.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z46.8 F720
G1 X103.937 Y106.292 F10800
G1 Z46.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y104.331 E.04528
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:46.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;46.6







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z46.8 F720
;AFTER_LAYER_CHANGE
;46.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z46.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z47 F720
G1 X146.063 Y103.708 F10800
G1 Z46.6 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y105.664 E.04496
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z47 F720
G1 X104.043 Y103.532 F10800
G1 Z46.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.11247
G1 X107.366 Y106.868 E.11291
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.983 Y103.532 E.01187
M204 S1000
G1 X103.643 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.337 Y103.125 E.02349
G1 X104.337 Y102.725 E.01354
G1 X104.729 Y102.725 E.01329
G1 X104.729 Y103.125 E.01354
G1 X105.969 Y103.125 E.04195
G1 X105.969 Y102.725 E.01354
G1 X106.294 Y102.725 E.011
G1 X106.294 Y103.125 E.01354
G1 X107.572 Y103.125 E.04326
G1 X107.572 Y102.725 E.01354
G1 X107.773 Y102.725 E.00679
G1 X107.773 Y107.275 E.15401
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.643 Y102.725 E.01414
G1 X103.643 Y103.065 E.01151
M204 S1000
G1 X103.749 Y103.511 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y105.669 E.04528
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:46.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;46.8







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z47 F720
;AFTER_LAYER_CHANGE
;46.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y106.468 F10800
G1 Z46.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.63 Y105.366 E.0373
G1 X142.511 Y105.366 E.00403
G1 X142.511 Y104.63 E.02491
G1 X142.63 Y104.63 E.00403
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y106.528 E.01151
M204 S1000
G1 X142.223 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.223 Y105.773 E.05084
G1 X142.104 Y105.773 E.00403
G1 X142.104 Y104.223 E.05247
G1 X142.223 Y104.223 E.00403
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.283 Y107.275 E.15206
M204 S1000
G1 X142.326 Y106.889 F10800
;WIPE_START
G1 F8640
G1 X142.223 Y105.773 E-.34709
G1 X142.104 Y105.773 E-.0275
M73 P83 R8
G1 X142.104 Y104.223 E-.3579
G1 X142.223 Y104.223 E-.0275
G1 X142.223 Y104.223 E-.00001
;WIPE_END
G1 E-.04 F2100
G1 Z47.2 F720
G1 X142.774 Y105.162 F10800
G1 Z46.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.161998
G1 F900
G1 X142.774 Y104.834 E.00326
;WIPE_START
G1 F8640
G1 X142.774 Y105.162 E-.07591
;WIPE_END
G1 E-.72409 F2100
G1 Z47.2 F720
G1 X146.063 Y103.708 F10800
G1 Z46.8 F720
M73 Q83 S8
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.528 E.00651
G1 X143.16 Y104.528 E.00762
G1 X143.16 Y105.468 E.0318
G1 X142.935 Y105.468 E.00762
G1 X142.935 Y105.664 E.00665
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z47.2 F720
G1 X104.043 Y103.532 F10800
G1 Z46.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.11247
G1 X107.366 Y104.63 E.03717
G1 X107.414 Y104.63 E.00165
G1 X107.414 Y105.366 E.02491
G1 X107.366 Y105.366 E.00165
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.983 Y103.532 E.01187
M204 S1000
G1 X103.643 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.337 Y103.125 E.02349
G1 X104.337 Y102.725 E.01354
G1 X104.592 Y102.725 E.00864
G1 X104.592 Y103.125 E.01354
G1 X105.308 Y103.125 E.02424
G1 X105.308 Y102.725 E.01354
G1 X105.416 Y102.725 E.00364
G1 X105.416 Y103.125 E.01354
G1 X106.88 Y103.125 E.04957
G1 X106.88 Y102.725 E.01354
G1 X107.013 Y102.725 E.00449
G1 X107.013 Y103.125 E.01354
G1 X107.747 Y103.125 E.02484
G1 X107.747 Y102.725 E.01354
G1 X107.773 Y102.725 E.00088
G1 X107.773 Y104.223 E.05071
G1 X107.821 Y104.223 E.00165
G1 X107.821 Y105.773 E.05247
G1 X107.773 Y105.773 E.00165
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.643 Y102.725 E.01414
G1 X103.643 Y103.065 E.01151
M204 S1000
G1 X103.749 Y103.511 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.935 E.02045
G1 X107.109 Y104.935 E.00165
G1 X107.109 Y105.061 E.00424
G1 X107.06 Y105.061 E.00165
G1 X107.06 Y105.669 E.02059
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:47
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;47







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z47.2 F720
;AFTER_LAYER_CHANGE
;47
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z47 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.272 Y105.366 E.0121
G1 X142.272 Y104.63 E.02491
G1 X142.63 Y104.63 E.0121
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.865 Y105.773 E.0121
G1 X141.865 Y104.223 E.05247
G1 X142.223 Y104.223 E.0121
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.078 Y105.446 F10800
;WIPE_START
G1 F8640
G1 X141.865 Y105.773 E-.08366
G1 X141.865 Y104.223 E-.3579
G1 X142.223 Y104.223 E-.08251
G1 X142.223 Y103.201 E-.23593
;WIPE_END
G1 E-.04 F2100
G1 Z47.4 F720
G1 X146.063 Y106.292 F10800
G1 Z47 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X146.063 Y106.563 E.00917
G1 X143.834 Y106.563 E.07545
G1 X142.935 Y105.664 E.04301
G1 X142.935 Y105.596 E.00231
G1 X142.969 Y105.596 E.00114
G1 X143.288 Y105.276 E.0153
G1 X143.288 Y104.72 E.01885
G1 X142.969 Y104.4 E.0153
M73 P83 R7
G1 X142.935 Y104.4 E.00114
G1 X142.935 Y104.336 E.00217
G1 X143.834 Y103.437 E.04301
G1 X146.063 Y103.437 E.07545
G1 X146.063 Y103.708 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y103.437 E-.06255
G1 X143.834 Y103.437 E-.5147
G1 X143.274 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z47.4 F720
G1 X104.043 Y103.532 F10800
G1 Z47 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X104.744 Y103.532 E.02373
G1 X104.744 Y103.132 E.01354
G1 X105.118 Y103.132 E.01265
G1 X105.118 Y103.532 E.01354
G1 X107.366 Y103.532 E.07609
G1 X107.366 Y104.63 E.03717
G1 X107.512 Y104.63 E.00494
G1 X107.512 Y105.366 E.02491
G1 X107.366 Y105.366 E.00494
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.983 Y103.532 E.01187
M204 S1000
G1 X103.643 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.337 Y103.125 E.02349
G1 X104.337 Y102.725 E.01354
G1 X105.525 Y102.725 E.04021
G1 X105.525 Y103.125 E.01354
G1 X106.788 Y103.125 E.04275
G1 X106.788 Y102.725 E.01354
G1 X107.118 Y102.725 E.01116
G1 X107.118 Y103.125 E.01354
G1 X107.773 Y103.125 E.02217
G1 X107.773 Y104.223 E.03717
G1 X107.919 Y104.223 E.00494
G1 X107.919 Y105.773 E.05247
G1 X107.773 Y105.773 E.00494
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.643 Y102.725 E.01414
G1 X103.643 Y103.065 E.01151
M204 S1000
G1 X103.749 Y103.511 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.528 E.00667
G1 X106.835 Y104.528 E.00762
G1 X106.835 Y105.468 E.0318
G1 X107.06 Y105.468 E.00762
G1 X107.06 Y105.669 E.00681
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z47.4 F720
G1 X107.235 Y105.162 F10800
G1 Z47 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.188958
G1 F900
G1 X107.235 Y104.834 E.00399
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:47.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;47.2







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X107.235 Y105.162 E-.07591
;WIPE_END
G1 E-.72409 F2100
G1 Z47.4 F720
;AFTER_LAYER_CHANGE
;47.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z47.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X142.034 Y105.366 E.02016
G1 X142.034 Y104.63 E.02491
G1 X142.63 Y104.63 E.02016
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.627 Y105.773 E.02016
G1 X141.627 Y104.223 E.05247
G1 X142.223 Y104.223 E.02016
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X141.627 Y105.773 E-.13821
G1 X141.627 Y104.223 E-.3579
G1 X142.223 Y104.223 E-.13752
G1 X142.223 Y103.676 E-.12637
;WIPE_END
G1 E-.04 F2100
G1 Z47.6 F720
G1 X143.064 Y104.867 F10800
G1 Z47.2 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.531415
G1 F900
G1 X142.688 Y105.244 E.02165
;WIPE_START
G1 F8640
G1 X143.064 Y104.867 E-.12306
;WIPE_END
G1 E-.67694 F2100
G1 Z47.6 F720
M73 Q83 S7
G1 X146.063 Y106.292 F10800
G1 Z47.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y106.563 E.00917
G1 X143.834 Y106.563 E.07545
G1 X142.935 Y105.664 E.04301
G1 X142.935 Y105.596 E.00231
G1 X142.969 Y105.596 E.00114
G1 X143.288 Y105.276 E.0153
G1 X143.288 Y104.72 E.01885
G1 X142.969 Y104.4 E.0153
G1 X142.935 Y104.4 E.00114
G1 X142.935 Y104.336 E.00217
G1 X143.834 Y103.437 E.04301
G1 X146.063 Y103.437 E.07545
G1 X146.063 Y103.708 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y103.437 E-.06256
G1 X143.834 Y103.437 E-.5147
G1 X143.274 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z47.6 F720
G1 X104.043 Y103.532 F10800
G1 Z47.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X106.667 Y103.532 E.08882
G1 X106.667 Y103.132 E.01354
G1 X106.725 Y103.132 E.00197
G1 X106.725 Y103.532 E.01354
G1 X107.366 Y103.532 E.02169
G1 X107.366 Y104.63 E.03717
G1 X107.623 Y104.63 E.00873
G1 X107.623 Y105.366 E.02491
G1 X107.366 Y105.366 E.00873
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.983 Y103.532 E.01187
M204 S1000
G1 X103.643 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.337 Y103.125 E.02349
G1 X104.337 Y102.725 E.01354
G1 X104.951 Y102.725 E.02079
G1 X104.951 Y103.125 E.01354
G1 X106.26 Y103.125 E.0443
G1 X106.26 Y102.725 E.01354
G1 X107.132 Y102.725 E.02953
G1 X107.132 Y103.125 E.01354
G1 X107.773 Y103.125 E.02169
G1 X107.773 Y104.223 E.03717
G1 X108.03 Y104.223 E.00873
G1 X108.03 Y105.773 E.05247
G1 X107.773 Y105.773 E.00873
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.643 Y102.725 E.01414
G1 X103.643 Y103.065 E.01151
M204 S1000
G1 X103.749 Y103.511 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:47.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;47.4







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z47.6 F720
;AFTER_LAYER_CHANGE
;47.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z47.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X141.796 Y105.366 E.02822
G1 X141.796 Y104.63 E.02491
G1 X142.63 Y104.63 E.02822
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.389 Y105.773 E.02822
G1 X141.389 Y104.223 E.05247
G1 X142.223 Y104.223 E.02822
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
G1 X141.999 Y104.998
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X142.833 Y104.998 E.02279
;WIPE_START
G1 F8640
G1 X141.999 Y104.998 E-.19253
;WIPE_END
G1 E-.60747 F2100
G1 Z47.8 F720
G1 X146.063 Y103.708 F10800
G1 Z47.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z47.8 F720
G1 X104.043 Y103.532 F10800
G1 Z47.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.11247
G1 X107.366 Y104.63 E.03717
G1 X107.743 Y104.63 E.01276
G1 X107.743 Y105.366 E.02491
G1 X107.366 Y105.366 E.01276
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.983 Y103.532 E.01187
M204 S1000
G1 X103.643 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.337 Y103.125 E.02349
G1 X104.337 Y102.725 E.01354
G1 X104.658 Y102.725 E.01087
G1 X104.658 Y103.125 E.01354
G1 X106.279 Y103.125 E.05488
G1 X106.279 Y102.725 E.01354
G1 X107.078 Y102.725 E.02703
G1 X107.078 Y103.125 E.01354
G1 X107.773 Y103.125 E.02352
G1 X107.773 Y104.223 E.03717
M73 P84 R7
G1 X108.15 Y104.223 E.01276
G1 X108.15 Y105.773 E.05247
G1 X107.773 Y105.773 E.01276
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
M73 Q84 S7
G1 X103.225 Y102.725 E.15401
G1 X103.643 Y102.725 E.01414
G1 X103.643 Y103.065 E.01151
M204 S1000
G1 X103.749 Y103.511 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:47.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;47.6







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z47.8 F720
;AFTER_LAYER_CHANGE
;47.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z47.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X141.558 Y105.366 E.03629
G1 X141.558 Y104.63 E.02491
G1 X142.63 Y104.63 E.03629
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X141.151 Y105.773 E.03629
G1 X141.151 Y104.223 E.05247
G1 X142.223 Y104.223 E.03629
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
G1 X141.761 Y104.998
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X142.833 Y104.998 E.02931
;WIPE_START
G1 F8640
G1 X141.761 Y104.998 E-.24754
;WIPE_END
G1 E-.55246 F2100
G1 Z48 F720
G1 X146.063 Y103.708 F10800
G1 Z47.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z48 F720
G1 X104.043 Y103.532 F10800
G1 Z47.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.11247
G1 X107.366 Y104.63 E.03717
G1 X107.87 Y104.63 E.01708
G1 X107.87 Y105.366 E.02491
G1 X107.366 Y105.366 E.01708
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.983 Y103.532 E.01187
M204 S1000
G1 X103.643 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.337 Y103.125 E.02349
G1 X104.337 Y102.725 E.01354
G1 X104.549 Y102.725 E.00718
G1 X104.549 Y103.125 E.01354
G1 X105.273 Y103.125 E.02452
G1 X105.273 Y102.725 E.01354
G1 X105.505 Y102.725 E.00784
G1 X105.505 Y103.125 E.01354
G1 X107.7 Y103.125 E.07429
G1 X107.7 Y102.725 E.01354
G1 X107.773 Y102.725 E.00247
G1 X107.773 Y104.223 E.05071
G1 X108.277 Y104.223 E.01708
G1 X108.277 Y105.773 E.05247
G1 X107.773 Y105.773 E.01708
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.643 Y102.725 E.01414
G1 X103.643 Y103.065 E.01151
M204 S1000
G1 X103.749 Y103.511 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X107.027 Y104.4 E.00114
G1 X106.707 Y104.72 E.0153
G1 X106.707 Y105.276 E.01885
G1 X107.027 Y105.596 E.0153
G1 X107.06 Y105.596 E.00114
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:47.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;47.8







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z48 F720
;AFTER_LAYER_CHANGE
;47.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z47.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X141.319 Y105.366 E.04435
G1 X141.319 Y104.63 E.02491
G1 X142.63 Y104.63 E.04435
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.912 Y105.773 E.04435
G1 X140.912 Y104.223 E.05247
G1 X142.223 Y104.223 E.04435
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.912 Y105.773 E-.30287
G1 X140.912 Y104.223 E-.3579
G1 X141.342 Y104.223 E-.09923
;WIPE_END
G1 E-.04 F2100
G1 Z48.2 F720
G1 X142.833 Y104.998 F10800
G1 Z47.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X141.523 Y104.998 E.03582
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.30255
;WIPE_END
G1 E-.49745 F2100
G1 Z48.2 F720
G1 X146.063 Y103.708 F10800
G1 Z47.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z48.2 F720
G1 X104.043 Y103.532 F10800
G1 Z47.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.11247
G1 X107.366 Y104.63 E.03717
G1 X108.011 Y104.63 E.02186
G1 X108.011 Y105.366 E.02491
G1 X107.366 Y105.366 E.02186
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.983 Y103.532 E.01187
M204 S1000
G1 X103.643 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.337 Y103.125 E.02349
G1 X104.337 Y102.725 E.01354
G1 X104.519 Y102.725 E.00617
G1 X104.519 Y103.125 E.01354
G1 X105.221 Y103.125 E.02376
G1 X105.221 Y102.725 E.01354
G1 X105.556 Y102.725 E.01134
G1 X105.556 Y103.125 E.01354
G1 X107.398 Y103.125 E.06236
G1 X107.398 Y102.725 E.01354
G1 X107.773 Y102.725 E.01267
G1 X107.773 Y104.223 E.05071
G1 X108.418 Y104.223 E.02186
G1 X108.418 Y105.773 E.05247
G1 X107.773 Y105.773 E.02186
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.643 Y102.725 E.01414
G1 X103.643 Y103.065 E.01151
M204 S1000
G1 X103.749 Y103.511 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.4 E.00233
G1 X106.728 Y104.72 E.01559
G1 X106.728 Y105.276 E.01885
G1 X107.06 Y105.596 E.01559
G1 X107.06 Y105.669 E.00247
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z48.2 F720
G1 X106.953 Y104.812 F10800
G1 Z47.8 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.531415
G1 F900
G1 X107.385 Y105.244 E.02482
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:48
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;48







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X106.953 Y104.812 E-.14111
;WIPE_END
G1 E-.65889 F2100
G1 Z48.2 F720
;AFTER_LAYER_CHANGE
;48
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z48 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X141.081 Y105.366 E.05242
G1 X141.081 Y104.63 E.02491
G1 X142.63 Y104.63 E.05242
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.674 Y105.773 E.05242
G1 X140.674 Y104.223 E.05247
G1 X142.223 Y104.223 E.05242
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.674 Y105.773 E-.35783
G1 X140.674 Y104.223 E-.3579
G1 X140.866 Y104.223 E-.04427
;WIPE_END
G1 E-.04 F2100
G1 Z48.4 F720
G1 X142.833 Y104.998 F10800
G1 Z48 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X141.285 Y104.998 E.04233
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.35756
;WIPE_END
G1 E-.44244 F2100
G1 Z48.4 F720
G1 X146.063 Y103.708 F10800
G1 Z48 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z48.4 F720
G1 X104.934 Y103.532 F10800
G1 Z48 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.314 Y103.532 E.08057
G1 X107.314 Y103.132 E.01354
G1 X107.366 Y103.132 E.00174
G1 X107.366 Y104.63 E.05071
G1 X108.167 Y104.63 E.02713
G1 X108.167 Y105.366 E.02491
G1 X107.366 Y105.366 E.02713
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104.874 Y103.532 E.04203
M204 S1000
G1 X104.534 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X105.244 Y103.125 E.02404
G1 X105.244 Y102.725 E.01354
G1 X105.54 Y102.725 E.01002
G1 X105.54 Y103.125 E.01354
G1 X106.907 Y103.125 E.04627
G1 X106.907 Y102.725 E.01354
G1 X107.773 Y102.725 E.0293
G1 X107.773 Y104.223 E.05071
G1 X108.574 Y104.223 E.02713
G1 X108.574 Y105.773 E.05247
G1 X107.773 Y105.773 E.02713
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
G1 X104.337 Y103.125 E.03763
G1 X104.337 Y102.725 E.01354
G1 X104.534 Y102.725 E.00667
G1 X104.534 Y103.065 E.01151
M204 S1000
G1 X104.595 Y103.52 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z48.4 F720
G1 X107.162 Y104.998 F10800
G1 Z48 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X107.963 Y104.998 E.02191
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:48.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;48.2







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
M73 P85 R7
G1 X107.162 Y104.998 E-.18506
;WIPE_END
G1 E-.61494 F2100
G1 Z48.4 F720
;AFTER_LAYER_CHANGE
;48.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z48.2 F720
M73 Q85 S7
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X140.843 Y105.366 E.06048
G1 X140.843 Y104.63 E.02491
G1 X142.63 Y104.63 E.06048
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.436 Y105.773 E.06048
G1 X140.436 Y104.223 E.05247
G1 X142.223 Y104.223 E.06048
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.436 Y105.773 E-.4128
G1 X140.436 Y104.269 E-.3472
;WIPE_END
G1 E-.04 F2100
G1 Z48.6 F720
G1 X142.833 Y104.998 F10800
G1 Z48.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X141.046 Y104.998 E.04884
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.41257
;WIPE_END
G1 E-.38743 F2100
G1 Z48.6 F720
G1 X146.063 Y103.708 F10800
G1 Z48.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z48.6 F720
G1 X104.032 Y103.532 F10800
G1 Z48.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.354 Y103.532 E.11246
G1 X107.366 Y103.132 E.01354
G1 X107.366 Y104.63 E.05071
G1 X108.335 Y104.63 E.03283
G1 X108.335 Y105.366 E.02491
G1 X107.366 Y105.366 E.03283
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X103.972 Y103.532 E.01151
M204 S1000
G1 X103.461 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.337 Y103.125 E.02963
G1 X104.337 Y102.725 E.01354
G1 X104.61 Y102.725 E.00923
G1 X104.61 Y103.125 E.01354
G1 X105.373 Y103.125 E.02584
G1 X105.373 Y102.725 E.01354
G1 X105.424 Y102.725 E.00174
G1 X105.424 Y103.125 E.01354
G1 X106.144 Y103.125 E.02437
G1 X106.144 Y102.725 E.01354
G1 X106.257 Y102.725 E.00383
G1 X106.257 Y103.125 E.01354
G1 X106.947 Y103.125 E.02335
G1 X106.947 Y102.725 E.01354
G1 X107.773 Y102.725 E.02794
G1 X107.773 Y104.223 E.05071
G1 X108.742 Y104.223 E.03283
G1 X108.742 Y105.773 E.05247
G1 X107.773 Y105.773 E.03283
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.461 Y102.725 E.008
G1 X103.461 Y103.065 E.01151
M204 S1000
G1 X103.532 Y103.519 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z48.6 F720
G1 X107.162 Y104.998 F10800
G1 Z48.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.132 Y104.998 E.02651
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:48.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;48.4







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.22392
;WIPE_END
G1 E-.57608 F2100
G1 Z48.6 F720
;AFTER_LAYER_CHANGE
;48.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z48.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X140.605 Y105.366 E.06854
G1 X140.605 Y104.63 E.02491
G1 X142.63 Y104.63 E.06854
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X140.198 Y105.773 E.06854
G1 X140.198 Y104.223 E.05247
M73 P85 R6
G1 X142.223 Y104.223 E.06854
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.198 Y105.773 E-.46779
G1 X140.198 Y104.507 E-.29221
;WIPE_END
G1 E-.04 F2100
G1 Z48.8 F720
G1 X142.833 Y104.998 F10800
G1 Z48.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.808 Y104.998 E.05536
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.46758
;WIPE_END
G1 E-.33242 F2100
G1 Z48.8 F720
G1 X146.063 Y103.708 F10800
G1 Z48.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z48.8 F720
G1 X104.06 Y103.532 F10800
G1 Z48.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.366 Y103.532 E.11188
G1 X107.366 Y104.63 E.03717
G1 X108.518 Y104.63 E.039
G1 X108.518 Y105.366 E.02491
G1 X107.366 Y105.366 E.039
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.532 E.11291
G1 X104 Y103.532 E.01247
M204 S1000
G1 X103.66 Y103.125 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X104.337 Y103.125 E.0229
G1 X104.337 Y102.725 E.01354
G1 X104.795 Y102.725 E.0155
G1 X104.795 Y103.125 E.01354
G1 X105.955 Y103.125 E.03929
G1 X105.955 Y102.725 E.01354
G1 X106.295 Y102.725 E.0115
G1 X106.295 Y103.125 E.01354
G1 X107.753 Y103.125 E.04934
G1 X107.753 Y102.725 E.01354
G1 X107.773 Y102.725 E.00067
G1 X107.773 Y104.223 E.05071
G1 X108.925 Y104.223 E.039
G1 X108.925 Y105.773 E.05247
G1 X107.773 Y105.773 E.039
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.66 Y102.725 E.01474
G1 X103.66 Y103.065 E.01151
M204 S1000
G1 X103.769 Y103.51 F10800
G1 X104.066 Y103.837
;TYPE:Internal infill
G1 F900
G1 X106.566 Y103.837 E.08462
G1 X107.06 Y104.331 E.02364
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
M73 Q85 S6
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z48.8 F720
G1 X107.162 Y104.998 F10800
G1 Z48.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.314 Y104.998 E.0315
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:48.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;48.6







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.26606
;WIPE_END
G1 E-.53394 F2100
G1 Z48.8 F720
;AFTER_LAYER_CHANGE
;48.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z48.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X140.366 Y105.366 E.07661
G1 X140.366 Y104.63 E.02491
G1 X142.63 Y104.63 E.07661
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.959 Y105.773 E.07661
G1 X139.959 Y104.223 E.05247
G1 X142.223 Y104.223 E.07661
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.959 Y105.773 E-.52277
G1 X139.959 Y104.746 E-.23723
;WIPE_END
G1 E-.04 F2100
G1 Z49 F720
G1 X142.833 Y104.998 F10800
G1 Z48.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.57 Y104.998 E.06187
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.52259
;WIPE_END
G1 E-.27741 F2100
G1 Z49 F720
G1 X146.063 Y103.708 F10800
G1 Z48.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z49 F720
G1 X108.173 Y104.63 F10800
G1 Z48.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X108.718 Y104.63 E.01848
G1 X108.718 Y105.366 E.02491
G1 X107.366 Y105.366 E.0458
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.126 Y104.223 E.0458
G1 X109.126 Y105.773 E.05247
G1 X107.773 Y105.773 E.0458
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.126 Y104.223 E-.3127
G1 X109.126 Y105.773 E-.3579
G1 X108.738 Y105.773 E-.0894
;WIPE_END
G1 E-.04 F2100
G1 Z49 F720
G1 X107.162 Y104.998 F10800
G1 Z48.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.515 Y104.998 E.03699
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.31239
;WIPE_END
G1 E-.48761 F2100
G1 Z49 F720
G1 X103.937 Y103.708 F10800
G1 Z48.6 F720
M73 P86 R6
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
M73 Q86 S6
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:48.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;48.8







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z49 F720
;AFTER_LAYER_CHANGE
;48.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z48.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X140.128 Y105.366 E.08467
G1 X140.128 Y104.63 E.02491
G1 X142.63 Y104.63 E.08467
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.721 Y105.773 E.08467
G1 X139.721 Y104.223 E.05247
G1 X142.223 Y104.223 E.08467
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.721 Y105.773 E-.57777
G1 X139.721 Y104.984 E-.18223
;WIPE_END
G1 E-.04 F2100
G1 Z49.2 F720
G1 X142.833 Y104.998 F10800
G1 Z48.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.332 Y104.998 E.06838
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.5776
;WIPE_END
G1 E-.2224 F2100
G1 Z49.2 F720
G1 X146.063 Y103.708 F10800
G1 Z48.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z49.2 F720
G1 X108.173 Y104.63 F10800
G1 Z48.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X108.944 Y104.63 E.0261
G1 X108.944 Y105.366 E.02491
G1 X107.366 Y105.366 E.05342
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.351 Y104.223 E.05342
G1 X109.351 Y105.773 E.05247
G1 X107.773 Y105.773 E.05342
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.351 Y104.223 E-.36465
G1 X109.351 Y105.773 E-.3579
G1 X109.189 Y105.773 E-.03745
;WIPE_END
G1 E-.04 F2100
G1 Z49.2 F720
G1 X107.162 Y104.998 F10800
G1 Z48.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.74 Y104.998 E.04314
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.36438
;WIPE_END
G1 E-.43562 F2100
G1 Z49.2 F720
G1 X103.937 Y103.708 F10800
G1 Z48.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:49
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;49







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z49.2 F720
;AFTER_LAYER_CHANGE
;49
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z49 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.89 Y105.366 E.09274
G1 X139.89 Y104.63 E.02491
G1 X142.63 Y104.63 E.09274
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.483 Y105.773 E.09274
G1 X139.483 Y104.223 E.05247
G1 X142.223 Y104.223 E.09274
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.483 Y105.773 E-.63276
G1 X139.483 Y105.222 E-.12724
;WIPE_END
G1 E-.04 F2100
G1 Z49.4 F720
G1 X142.833 Y104.998 F10800
G1 Z49 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X140.094 Y104.998 E.0749
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.63261
;WIPE_END
G1 E-.16739 F2100
G1 Z49.4 F720
G1 X146.063 Y103.708 F10800
G1 Z49 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z49.4 F720
G1 X108.173 Y104.63 F10800
G1 Z49 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.192 Y104.63 E.03451
G1 X109.192 Y105.366 E.02491
G1 X107.366 Y105.366 E.06183
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.599 Y104.223 E.06183
G1 X109.599 Y105.773 E.05247
G1 X107.773 Y105.773 E.06183
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.599 Y104.223 E-.42202
G1 X109.599 Y105.687 E-.33798
;WIPE_END
G1 E-.04 F2100
G1 Z49.4 F720
G1 X107.162 Y104.998 F10800
G1 Z49 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X108.989 Y104.998 E.04994
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.42179
;WIPE_END
G1 E-.37821 F2100
G1 Z49.4 F720
G1 X103.937 Y103.708 F10800
G1 Z49 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:49.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;49.2







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z49.4 F720
;AFTER_LAYER_CHANGE
;49.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z49.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.652 Y105.366 E.1008
G1 X139.652 Y104.63 E.02491
G1 X142.63 Y104.63 E.1008
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.245 Y105.773 E.1008
G1 X139.245 Y104.223 E.05247
G1 X142.223 Y104.223 E.1008
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.245 Y105.773 E-.68776
G1 X139.245 Y105.46 E-.07224
;WIPE_END
G1 E-.04 F2100
G1 Z49.6 F720
G1 X142.833 Y104.998 F10800
G1 Z49.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.855 Y104.998 E.08141
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.68762
;WIPE_END
G1 E-.11238 F2100
G1 Z49.6 F720
G1 X146.063 Y103.708 F10800
G1 Z49.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z49.6 F720
G1 X108.173 Y104.63 F10800
G1 Z49.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.472 Y104.63 E.04398
G1 X109.472 Y105.366 E.02491
G1 X107.366 Y105.366 E.0713
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
M73 P87 R6
M73 Q87 S6
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.879 Y104.223 E.0713
G1 X109.879 Y105.773 E.05247
G1 X107.773 Y105.773 E.0713
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.879 Y104.223 E-.48655
G1 X109.879 Y105.407 E-.27345
;WIPE_END
G1 E-.04 F2100
G1 Z49.6 F720
G1 X107.162 Y104.998 F10800
G1 Z49.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.268 Y104.998 E.05758
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.48635
;WIPE_END
G1 E-.31365 F2100
G1 Z49.6 F720
G1 X103.937 Y103.708 F10800
G1 Z49.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:49.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;49.4







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z49.6 F720
;AFTER_LAYER_CHANGE
;49.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z49.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.414 Y105.366 E.10887
G1 X139.414 Y104.63 E.02491
G1 X142.63 Y104.63 E.10886
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X139.006 Y105.773 E.10886
G1 X139.006 Y104.223 E.05247
G1 X142.223 Y104.223 E.10886
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.006 Y105.773 E-.74276
G1 X139.006 Y105.698 E-.01724
;WIPE_END
G1 E-.04 F2100
G1 Z49.8 F720
G1 X142.833 Y104.998 F10800
G1 Z49.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.617 Y104.998 E.08792
;WIPE_START
G1 F8640
G1 X142.833 Y104.998 E-.74263
;WIPE_END
G1 E-.05737 F2100
G1 Z49.8 F720
G1 X146.063 Y103.708 F10800
G1 Z49.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z49.8 F720
G1 X108.173 Y104.63 F10800
G1 Z49.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X109.788 Y104.63 E.05468
G1 X109.788 Y105.366 E.02491
G1 X107.366 Y105.366 E.082
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X110.195 Y104.223 E.082
G1 X110.195 Y105.773 E.05247
G1 X107.773 Y105.773 E.082
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X110.195 Y104.223 E-.55951
G1 X110.195 Y105.091 E-.20049
;WIPE_END
G1 E-.04 F2100
G1 Z49.8 F720
G1 X107.162 Y104.998 F10800
G1 Z49.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.584 Y104.998 E.06622
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.55934
;WIPE_END
G1 E-.24066 F2100
G1 Z49.8 F720
G1 X103.937 Y103.708 F10800
G1 Z49.4 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
M73 P87 R5
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:49.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;49.6







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z49.8 F720
;AFTER_LAYER_CHANGE
;49.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y105.373 F10800
G1 Z49.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.175 Y105.366 E.11693
G1 X139.175 Y104.63 E.02491
G1 X142.63 Y104.63 E.11693
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.433 E.04857
M204 S1000
G1 X142.223 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X138.768 Y105.773 E.11693
G1 X138.768 Y104.223 E.05247
G1 X142.223 Y104.223 E.11693
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X138.932 Y105.776 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z50 F720
G1 X142.833 Y104.998 F10800
G1 Z49.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X139.379 Y104.998 E.09443
;WIPE_START
G1 F8640
G1 X142.67 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z50 F720
G1 X146.063 Y103.708 F10800
G1 Z49.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z50 F720
G1 X108.173 Y104.63 F10800
G1 Z49.6 F720
M73 Q87 S5
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X110.16 Y104.63 E.06727
G1 X110.16 Y105.366 E.02491
G1 X107.366 Y105.366 E.09459
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X110.567 Y104.223 E.09459
G1 X110.567 Y105.773 E.05247
G1 X107.773 Y105.773 E.09459
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X110.567 Y104.223 E-.64541
G1 X110.567 Y104.719 E-.11459
;WIPE_END
G1 E-.04 F2100
G1 Z50 F720
G1 X107.162 Y104.998 F10800
G1 Z49.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F900
G1 X109.957 Y104.998 E.07639
;WIPE_START
G1 F8640
G1 X107.162 Y104.998 E-.64526
;WIPE_END
G1 E-.15474 F2100
G1 Z50 F720
G1 X103.937 Y103.708 F10800
G1 Z49.6 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F900
G1 X103.937 Y103.437 E.00917
G1 X106.166 Y103.437 E.07545
G1 X107.06 Y104.331 E.04279
G1 X107.06 Y104.507 E.00595
G1 X106.857 Y104.507 E.00689
G1 X106.857 Y105.489 E.03325
G1 X107.06 Y105.489 E.00689
G1 X107.06 Y105.669 E.00608
G1 X106.166 Y106.563 E.04279
G1 X103.937 Y106.563 E.07545
G1 X103.937 Y106.292 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:49.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;49.8







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X103.937 Y106.563 E-.06256
G1 X106.166 Y106.563 E-.5147
G1 X106.726 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z50 F720
;AFTER_LAYER_CHANGE
;49.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.373 Y105.366 F10800
G1 Z49.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F927
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X110.992 Y104.63 E.12276
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X138.343 Y104.63 E.87951
;TYPE:Perimeter
;WIDTH:0.45
G1 F927
G1 X142.63 Y104.63 E.14509
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
M73 P88 R5
G1 X142.63 Y105.366 E.05084
M73 Q88 S5
G1 X138.343 Y105.366 E.14509
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X110.992 Y105.366 E.87951
;TYPE:Perimeter
;WIDTH:0.45
G1 F927
G1 X107.433 Y105.366 E.12049
M204 S1000
G1 X107.773 Y105.773 F10800
M204 S800
;TYPE:External perimeter
G1 F927
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.223 E.05071
G1 X110.992 Y104.223 E.10898
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X138.343 Y104.223 E.87951
;TYPE:External perimeter
;WIDTH:0.45
G1 F927
G1 X142.223 Y104.223 E.13131
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X138.343 Y105.773 E.13131
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X110.992 Y105.773 E.87951
;TYPE:External perimeter
;WIDTH:0.45
G1 F927
G1 X107.833 Y105.773 E.10695
M204 S1000
;WIPE_START
G1 F8640
G1 X107.773 Y107.275 E-.34709
G1 X105.984 Y107.275 E-.41291
;WIPE_END
G1 E-.04 F2100
G1 Z50.2 F720
G1 X107.162 Y104.998 F10800
G1 Z49.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F927
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z50.2 F720
G1 X146.063 Y103.708 F10800
G1 Z49.8 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F927
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z50.2 F720
G1 X103.937 Y106.292 F10800
G1 Z49.8 F720
G1 E.8 F2100
G1 F927
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:50
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;50







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z50.2 F720
;AFTER_LAYER_CHANGE
;50
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
G1 Z50 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F1087
G1 X142.63 Y104.63 E1.16633
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.366 E.05084
G1 X107.366 Y105.366 E1.19365
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F1087
G1 X142.223 Y104.223 E1.16609
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X107.773 Y105.773 E1.16609
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X111.064 Y104.169 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z50.4 F720
G1 X107.162 Y104.998 F10800
G1 Z50 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F1087
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z50.4 F720
G1 X146.063 Y103.708 F10800
G1 Z50 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F1087
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z50.4 F720
G1 X103.937 Y106.292 F10800
G1 Z50 F720
G1 E.8 F2100
G1 F1087
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
M73 P89 R5
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:50.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;50.2







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z50.4 F720
;AFTER_LAYER_CHANGE
;50.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.173 Y104.63 F10800
M73 Q89 S5
G1 Z50.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F1087
G1 X142.63 Y104.63 E1.16633
G1 X142.63 Y103.132 E.05071
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y105.366 E.05084
G1 X107.366 Y105.366 E1.19365
G1 X107.366 Y106.868 E.05084
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y104.63 E.05071
G1 X108.113 Y104.63 E.02529
M204 S1000
G1 X107.773 Y104.223 F10800
M204 S800
;TYPE:External perimeter
G1 F1087
G1 X142.223 Y104.223 E1.16609
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X107.773 Y105.773 E1.16609
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X111.064 Y104.169 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z50.6 F720
G1 X107.162 Y104.998 F10800
G1 Z50.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.371688
G1 F1087
G1 X142.833 Y104.998 E.97515
;WIPE_START
G1 F8640
G1 X139.542 Y104.998 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z50.6 F720
G1 X146.063 Y103.708 F10800
G1 Z50.2 F720
G1 E.8 F2100
;TYPE:Internal infill
;WIDTH:0.45
G1 F1087
G1 X146.063 Y103.437 E.00917
G1 X143.834 Y103.437 E.07545
G1 X142.935 Y104.336 E.04301
G1 X142.935 Y104.507 E.00579
G1 X143.139 Y104.507 E.00689
G1 X143.139 Y105.489 E.03325
G1 X142.935 Y105.489 E.00689
G1 X142.935 Y105.664 E.00592
G1 X143.834 Y106.563 E.04301
G1 X146.063 Y106.563 E.07545
G1 X146.063 Y106.292 E.00917
;WIPE_START
G1 F8640
G1 X146.063 Y106.563 E-.06255
G1 X143.834 Y106.563 E-.5147
G1 X143.274 Y106.003 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z50.6 F720
G1 X103.937 Y106.292 F10800
G1 Z50.2 F720
G1 E.8 F2100
G1 F1087
G1 X103.937 Y106.563 E.00917
G1 X106.166 Y106.563 E.07545
G1 X107.06 Y105.669 E.04279
G1 X107.06 Y105.489 E.00608
G1 X106.857 Y105.489 E.00689
G1 X106.857 Y104.507 E.03325
G1 X107.06 Y104.507 E.00689
G1 X107.06 Y104.331 E.00595
G1 X106.166 Y103.437 E.04279
G1 X103.937 Y103.437 E.07545
G1 X103.937 Y103.708 E.00917
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:50.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;50.4







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
M73 P89 R4
G1 X103.937 Y103.437 E-.06256
G1 X106.166 Y103.437 E-.5147
G1 X106.726 Y103.997 E-.18274
;WIPE_END
G1 E-.04 F2100
G1 Z50.6 F720
;AFTER_LAYER_CHANGE
;50.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z50.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z50.8 F720
G1 X104.135 Y103.906 F10800
G1 Z50.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X104.135 Y103.635 E.00916
G1 X106.364 Y103.635 E.07546
G1 X106.863 Y104.134 E.02385
G1 X106.863 Y105.866 E.05866
G1 X106.368 Y106.361 E.02366
G1 X104.135 Y106.361 E.0756
G1 X104.135 Y106.094 E.00902
;WIPE_START
G1 F8640
G1 X104.135 Y106.361 E-.06155
G1 X106.368 Y106.361 E-.51571
G1 X106.863 Y105.866 E-.16137
G1 X106.863 Y105.774 E-.02138
;WIPE_END
G1 E-.04 F2100
G1 Z50.8 F720
G1 X142.832 Y106.266 F10800
G1 Z50.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X142.832 Y103.33 E.09937
G1 X146.166 Y103.33 E.11283
G1 X146.166 Y106.666 E.11291
G1 X142.832 Y106.666 E.11283
G1 X142.832 Y106.326 E.01151
M204 S1000
G1 X142.425 Y107.073 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
M73 Q89 S4
G1 X142.485 Y107.073 E.13836
M204 S1000
G1 X142.529 Y106.687 F10800
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z50.8 F720
G1 X145.86 Y106.089 F10800
G1 Z50.4 F720
G1 E.8 F2100
;TYPE:Internal infill
G1 F900
G1 X145.86 Y106.361 E.00918
G1 X143.632 Y106.361 E.07544
G1 X143.137 Y105.866 E.02365
G1 X143.137 Y104.134 E.05866
G1 X143.636 Y103.635 E.02385
G1 X145.86 Y103.635 E.0753
G1 X145.86 Y103.911 E.00932
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:50.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;50.6







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X145.86 Y103.635 E-.06356
G1 X143.636 Y103.635 E-.51369
G1 X143.137 Y104.134 E-.16267
G1 X143.137 Y104.22 E-.02007
;WIPE_END
G1 E-.04 F2100
G1 Z50.8 F720
;AFTER_LAYER_CHANGE
;50.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z50.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z51 F720
G1 X106.231 Y103.451 F10800
G1 Z50.6 F720
G1 E.8 F2100
;TYPE:Bridge infill
;WIDTH:0.445778
G1 F1500
G1 X106.873 Y104.093 E.03041
G1 X106.873 Y104.663 E.01908
G1 X105.835 Y103.625 E.04916
G1 X105.265 Y103.625 E.01908
G1 X106.873 Y105.233 E.07615
G1 X106.873 Y105.802 E.01908
G1 X104.696 Y103.625 E.10314
G1 X104.126 Y103.625 E.01908
G1 X106.872 Y106.371 E.13007
G1 X106.302 Y106.371 E.01908
G1 X104.125 Y104.194 E.10313
G1 X104.125 Y104.764 E.01908
G1 X105.732 Y106.371 E.07614
G1 X105.162 Y106.371 E.01908
G1 X104.125 Y105.333 E.04915
G1 X104.125 Y105.903 E.01908
G1 X104.767 Y106.545 E.03041
;WIPE_START
G1 F8640
G1 X104.125 Y105.903 E-.20959
G1 X104.125 Y105.333 E-.13155
G1 X105.162 Y106.371 E-.3388
G1 X105.509 Y106.371 E-.08006
;WIPE_END
G1 E-.04 F2100
G1 Z51 F720
G1 X142.832 Y106.266 F10800
G1 Z50.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
M73 P90 R4
G1 F900
G1 X142.832 Y103.33 E.09937
G1 X146.166 Y103.33 E.11283
G1 X146.166 Y106.666 E.11291
G1 X142.832 Y106.666 E.11283
M73 Q90 S4
G1 X142.832 Y106.326 E.01151
M204 S1000
G1 X142.425 Y107.073 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.485 Y107.073 E.13836
M204 S1000
G1 X142.529 Y106.687 F10800
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z51 F720
G1 X146.044 Y104.267 F10800
G1 Z50.6 F720
G1 E.8 F2100
;TYPE:Bridge infill
;WIDTH:0.445475
G1 F1500
G1 X145.403 Y103.625 E.03036
G1 X144.834 Y103.625 E.01906
G1 X145.87 Y104.662 E.04907
G1 X145.87 Y105.231 E.01906
G1 X144.265 Y103.625 E.07602
G1 X143.695 Y103.625 E.01906
G1 X145.87 Y105.8 E.10297
G1 X145.87 Y106.37 E.01906
G1 X143.127 Y103.626 E.12986
G1 X143.127 Y104.196 E.01906
G1 X145.302 Y106.371 E.10296
G1 X144.733 Y106.371 E.01906
G1 X143.127 Y104.765 E.07601
G1 X143.127 Y105.334 E.01906
G1 X144.164 Y106.371 E.04906
G1 X143.594 Y106.371 E.01906
G1 X142.953 Y105.73 E.03035
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:50.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;50.8







 M104 S195 M109 S195 

;WIPE_START
G1 F8640
G1 X143.594 Y106.371 E-.20938
G1 X144.164 Y106.371 E-.13145
G1 X143.127 Y105.334 E-.33845
G1 X143.127 Y104.985 E-.08072
;WIPE_END
G1 E-.04 F2100
G1 Z51 F720
;AFTER_LAYER_CHANGE
;50.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.168 Y103.73 F10800
G1 Z50.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X107.168 Y106.666 E.09937
G1 X103.83 Y106.666 E.11299
G1 X103.83 Y103.33 E.11291
G1 X107.168 Y103.33 E.11299
G1 X107.168 Y103.67 E.01151
M204 S1000
G1 X107.575 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z51.2 F720
G1 X107.046 Y105.644 F10800
G1 Z50.8 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.486064
G1 F900
G1 X106.33 Y106.361 E.03732
G1 X105.703 Y106.361 E.02309
G1 X106.863 Y105.201 E.06043
G1 X106.863 Y104.574 E.02309
G1 X105.076 Y106.361 E.09309
G1 X104.449 Y106.361 E.02309
G1 X106.863 Y103.947 E.12575
G1 X106.863 Y103.635 E.0115
G1 X106.548 Y103.635 E.01159
G1 X104.135 Y106.048 E.12574
G1 X104.135 Y105.422 E.02309
G1 X105.921 Y103.635 E.09309
G1 X105.295 Y103.635 E.02309
G1 X104.135 Y104.795 E.06043
G1 X104.135 Y104.168 E.02309
G1 X104.851 Y103.452 E.03732
;WIPE_START
G1 F8640
G1 X104.135 Y104.168 E-.23384
G1 X104.135 Y104.795 E-.14471
G1 X105.295 Y103.635 E-.37867
G1 X105.307 Y103.635 E-.00279
;WIPE_END
G1 E-.04 F2100
G1 Z51.2 F720
G1 X143.232 Y103.33 F10800
G1 Z50.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X146.166 Y103.33 E.09929
G1 X146.166 Y106.666 E.11291
G1 X142.832 Y106.666 E.11283
G1 X142.832 Y103.33 E.11291
G1 X143.172 Y103.33 E.01151
M204 S1000
G1 X142.425 Y102.923 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.425 Y107.073 E.14039
G1 X142.425 Y102.983 E.13844
M204 S1000
G1 X142.811 Y103.027 F10800
;WIPE_START
G1 F8640
G1 X145.716 Y102.935 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z51.2 F720
G1 X146.043 Y105.645 F10800
G1 Z50.8 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.485731
G1 F900
G1 X145.328 Y106.361 E.03726
G1 X144.702 Y106.361 E.02306
G1 X145.86 Y105.202 E.06033
G1 X145.86 Y104.576 E.02306
G1 X144.075 Y106.361 E.09294
G1 X143.449 Y106.361 E.02306
G1 X145.86 Y103.95 E.12554
G1 X145.86 Y103.635 E.01157
G1 X145.548 Y103.635 E.01149
G1 X143.137 Y106.046 E.12554
G1 X143.137 Y105.42 E.02306
G1 X144.922 Y103.635 E.09293
G1 X144.296 Y103.635 E.02306
G1 X143.137 Y104.794 E.06032
G1 X143.137 Y104.168 E.02306
G1 X143.853 Y103.452 E.03725
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:51
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;51








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X143.137 Y104.168 E-.23361
G1 X143.137 Y104.794 E-.1446
G1 X144.296 Y103.635 E-.37828
G1 X144.311 Y103.635 E-.00352
;WIPE_END
G1 E-.04 F2100
G1 Z51.2 F720
;AFTER_LAYER_CHANGE
;51
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z51 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z51.4 F720
G1 X145.403 Y103.254 F10800
G1 Z51 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.459348
G1 F900
G1 X146.063 Y103.914 E.0323
G1 X146.063 Y104.503 E.02039
G1 X144.997 Y103.437 E.05217
G1 X144.408 Y103.437 E.02039
G1 X146.063 Y105.092 E.081
G1 X146.063 Y105.68 E.02039
G1 X143.82 Y103.437 E.10984
G1 X143.231 Y103.437 E.02039
G1 X146.063 Y106.269 E.13868
G1 X146.063 Y106.563 E.01015
G1 X145.767 Y106.563 E.01024
G1 X142.935 Y103.731 E.13867
G1 X142.935 Y104.32 E.02039
G1 X145.178 Y106.563 E.10984
G1 X144.589 Y106.563 E.02039
G1 X142.935 Y104.909 E.081
G1 X142.935 Y105.497 E.02039
G1 X144 Y106.563 E.05216
G1 X143.411 Y106.563 E.02039
G1 X142.752 Y105.903 E.03229
;WIPE_START
G1 F8640
G1 X143.411 Y106.563 E-.21533
G1 X144 Y106.563 E-.13598
G1 X142.935 Y105.497 E-.34782
G1 X142.935 Y105.234 E-.06087
;WIPE_END
G1 E-.04 F2100
G1 Z51.4 F720
G1 X106.966 Y106.868 F10800
G1 Z51 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z51.4 F720
G1 X106.401 Y103.254 F10800
G1 Z51 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.459069
G1 F900
G1 X107.06 Y103.913 E.03225
G1 X107.06 Y104.502 E.02036
G1 X105.996 Y103.437 E.05208
G1 X105.407 Y103.437 E.02036
G1 X107.06 Y105.09 E.08088
G1 X107.06 Y105.679 E.02036
G1 X104.819 Y103.437 E.10968
G1 X104.23 Y103.437 E.02036
G1 X107.06 Y106.267 E.13848
G1 X107.06 Y106.563 E.01022
G1 X106.767 Y106.563 E.01014
G1 X103.937 Y103.733 E.13848
G1 X103.937 Y104.321 E.02036
G1 X106.179 Y106.563 E.10968
G1 X105.59 Y106.563 E.02036
G1 X103.937 Y104.91 E.08088
G1 X103.937 Y105.498 E.02036
G1 X105.002 Y106.563 E.05208
G1 X104.413 Y106.563 E.02036
G1 X103.754 Y105.904 E.03224
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:51.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;51.2








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X104.413 Y106.563 E-.21514
G1 X105.002 Y106.563 E-.13589
G1 X103.937 Y105.498 E-.3475
G1 X103.937 Y105.232 E-.06147
;WIPE_END
G1 E-.04 F2100
G1 Z51.4 F720
;AFTER_LAYER_CHANGE
;51.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y106.468 F10800
G1 Z51.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X142.63 Y103.132 E.11291
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y106.528 E.01151
M204 S1000
G1 X142.223 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.223 Y102.725 E.15401
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.283 Y107.275 E.15206
M204 S1000
G1 X142.326 Y106.889 F10800
;WIPE_START
G1 F8640
G1 X142.239 Y103.984 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z51.6 F720
G1 X146.246 Y105.903 F10800
G1 Z51.2 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.459348
G1 F900
G1 X145.586 Y106.563 E.0323
G1 X144.997 Y106.563 E.02039
G1 X146.063 Y105.497 E.05217
G1 X146.063 Y104.908 E.02039
G1 X144.408 Y106.563 E.081
G1 X143.82 Y106.563 E.02039
G1 X146.063 Y104.32 E.10984
G1 X146.063 Y103.731 E.02039
G1 X143.231 Y106.563 E.13868
G1 X142.935 Y106.563 E.01023
G1 X142.935 Y106.269 E.01016
G1 X145.767 Y103.437 E.13867
G1 X145.178 Y103.437 E.02039
G1 X142.935 Y105.68 E.10984
G1 X142.935 Y105.091 E.02039
G1 X144.589 Y103.437 E.081
G1 X144 Y103.437 E.02039
G1 X142.935 Y104.503 E.05216
G1 X142.935 Y103.914 E.02039
G1 X143.594 Y103.254 E.03229
;WIPE_START
G1 F8640
M73 P91 R4
G1 X142.935 Y103.914 E-.21533
G1 X142.935 Y104.503 E-.13598
G1 X144 Y103.437 E-.34782
G1 X144.264 Y103.437 E-.06087
;WIPE_END
G1 E-.04 F2100
G1 Z51.6 F720
G1 X107.366 Y103.532 F10800
G1 Z51.2 F720
M73 Q91 S4
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X107.366 Y106.868 E.11291
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y103.472 E.01151
M204 S1000
G1 X107.773 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.773 Y107.275 E.15401
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.713 Y102.725 E.1519
M204 S1000
G1 X107.669 Y103.111 F10800
;WIPE_START
G1 F8640
G1 X107.756 Y106.016 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z51.6 F720
G1 X107.243 Y105.904 F10800
G1 Z51.2 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.459069
G1 F900
G1 X106.584 Y106.563 E.03225
G1 X105.996 Y106.563 E.02036
G1 X107.06 Y105.498 E.05208
G1 X107.06 Y104.91 E.02036
G1 X105.407 Y106.563 E.08088
G1 X104.819 Y106.563 E.02036
G1 X107.06 Y104.321 E.10968
G1 X107.06 Y103.733 E.02036
G1 X104.23 Y106.563 E.13848
G1 X103.937 Y106.563 E.01014
G1 X103.937 Y106.267 E.01023
G1 X106.767 Y103.437 E.13848
G1 X106.179 Y103.437 E.02036
G1 X103.937 Y105.679 E.10968
G1 X103.937 Y105.09 E.02036
G1 X105.59 Y103.437 E.08088
G1 X105.002 Y103.437 E.02036
G1 X103.937 Y104.502 E.05208
G1 X103.937 Y103.913 E.02036
G1 X104.596 Y103.254 E.03224
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:51.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;51.4








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X103.937 Y103.913 E-.21514
G1 X103.937 Y104.502 E-.13589
G1 X105.002 Y103.437 E-.3475
G1 X105.268 Y103.437 E-.06147
;WIPE_END
G1 E-.04 F2100
G1 Z51.6 F720
;AFTER_LAYER_CHANGE
;51.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X143.03 Y103.132 F10800
G1 Z51.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X146.368 Y103.132 E.11299
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y103.132 E.12645
G1 X142.97 Y103.132 E.01151
M204 S1000
G1 X142.223 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z51.8 F720
G1 X145.403 Y103.254 F10800
G1 Z51.4 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.459348
G1 F900
G1 X146.063 Y103.914 E.0323
G1 X146.063 Y104.503 E.02039
G1 X144.997 Y103.437 E.05217
G1 X144.408 Y103.437 E.02039
G1 X146.063 Y105.092 E.081
G1 X146.063 Y105.68 E.02039
G1 X143.82 Y103.437 E.10984
G1 X143.231 Y103.437 E.02039
G1 X146.063 Y106.269 E.13868
G1 X146.063 Y106.563 E.01015
G1 X145.767 Y106.563 E.01024
G1 X142.935 Y103.731 E.13867
G1 X142.935 Y104.32 E.02039
G1 X145.178 Y106.563 E.10984
G1 X144.589 Y106.563 E.02039
G1 X142.935 Y104.909 E.081
G1 X142.935 Y105.497 E.02039
G1 X144 Y106.563 E.05216
G1 X143.411 Y106.563 E.02039
G1 X142.752 Y105.903 E.03229
;WIPE_START
G1 F8640
G1 X143.411 Y106.563 E-.21533
G1 X144 Y106.563 E-.13598
G1 X142.935 Y105.497 E-.34782
G1 X142.935 Y105.234 E-.06087
;WIPE_END
G1 E-.04 F2100
G1 Z51.8 F720
G1 X106.966 Y106.868 F10800
G1 Z51.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X103.632 Y106.868 E.11283
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y106.868 E.12645
G1 X107.026 Y106.868 E.01151
M204 S1000
G1 X107.773 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z51.8 F720
G1 X106.401 Y103.254 F10800
G1 Z51.4 F720
G1 E.8 F2100
;TYPE:Solid infill
;WIDTH:0.459069
G1 F900
G1 X107.06 Y103.913 E.03225
G1 X107.06 Y104.502 E.02036
G1 X105.996 Y103.437 E.05208
G1 X105.407 Y103.437 E.02036
G1 X107.06 Y105.09 E.08088
G1 X107.06 Y105.679 E.02036
G1 X104.819 Y103.437 E.10968
G1 X104.23 Y103.437 E.02036
G1 X107.06 Y106.267 E.13848
G1 X107.06 Y106.563 E.01022
G1 X106.767 Y106.563 E.01014
G1 X103.937 Y103.733 E.13848
G1 X103.937 Y104.321 E.02036
G1 X106.179 Y106.563 E.10968
G1 X105.59 Y106.563 E.02036
G1 X103.937 Y104.91 E.08088
G1 X103.937 Y105.498 E.02036
G1 X105.002 Y106.563 E.05208
G1 X104.413 Y106.563 E.02036
G1 X103.754 Y105.904 E.03224
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:51.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;51.6








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X104.413 Y106.563 E-.21514
G1 X105.002 Y106.563 E-.13589
G1 X103.937 Y105.498 E-.3475
G1 X103.937 Y105.232 E-.06147
;WIPE_END
G1 E-.04 F2100
G1 Z51.8 F720
;AFTER_LAYER_CHANGE
;51.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.63 Y106.468 F10800
G1 Z51.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X142.63 Y103.132 E.11291
G1 X146.368 Y103.132 E.12653
G1 X146.368 Y106.868 E.12645
G1 X142.63 Y106.868 E.12653
G1 X142.63 Y106.528 E.01151
M204 S1000
G1 X142.223 Y107.275 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X142.223 Y102.725 E.15401
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.283 Y107.275 E.15206
M204 S1000
G1 X142.326 Y106.889 F10800
;WIPE_START
G1 F8640
G1 X142.239 Y103.984 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z52 F720
G1 X145.469 Y106.748 F10800
M73 P91 R3
G1 Z51.6 F720
G1 E.8 F2100
;TYPE:Top solid infill
;WIDTH:0.427317
G1 F900
G1 X146.088 Y106.129 E.02798
G1 X146.088 Y105.586 E.01738
G1 X145.086 Y106.588 E.04529
G1 X144.542 Y106.588 E.01738
G1 X146.088 Y105.042 E.06987
G1 X146.088 Y104.498 E.01738
G1 X143.998 Y106.588 E.09444
G1 X143.455 Y106.588 E.01738
G1 X146.088 Y103.955 E.11901
G1 X146.088 Y103.412 E.01734
G1 X142.91 Y106.588 E.14358
G1 X142.91 Y106.045 E.01734
G1 X145.543 Y103.412 E.11901
G1 X144.999 Y103.412 E.01738
G1 X142.91 Y105.502 E.09443
G1 X142.91 Y104.958 E.01738
G1 X144.456 Y103.412 E.06986
G1 X143.912 Y103.412 E.01738
G1 X142.91 Y104.414 E.04529
G1 X142.91 Y103.871 E.01738
G1 X143.529 Y103.252 E.02798
;WIPE_START
G1 F8640
G1 X142.91 Y103.871 E-.20212
G1 X142.91 Y104.414 E-.12552
G1 X143.912 Y103.412 E-.32717
G1 X144.367 Y103.412 E-.10518
;WIPE_END
G1 E-.04 F2100
G1 Z52 F720
G1 X107.366 Y103.532 F10800
G1 Z51.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X107.366 Y106.868 E.11291
G1 X103.632 Y106.868 E.12637
G1 X103.632 Y103.132 E.12645
G1 X107.366 Y103.132 E.12637
G1 X107.366 Y103.472 E.01151
M204 S1000
G1 X107.773 Y102.725 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.773 Y107.275 E.15401
G1 X103.225 Y107.275 E.15393
M73 Q91 S3
G1 X103.225 Y102.725 E.15401
G1 X107.713 Y102.725 E.1519
M204 S1000
G1 X107.669 Y103.111 F10800
;WIPE_START
G1 F8640
G1 X107.756 Y106.016 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z52 F720
G1 X106.467 Y106.748 F10800
G1 Z51.6 F720
G1 E.8 F2100
;TYPE:Top solid infill
;WIDTH:0.42706
G1 F900
G1 X107.085 Y106.13 E.02794
G1 X107.085 Y105.587 E.01735
G1 X106.084 Y106.588 E.04522
G1 X105.541 Y106.588 E.01735
G1 X107.085 Y105.043 E.06976
G1 X107.085 Y104.5 E.01735
G1 X104.998 Y106.588 E.0943
G1 X104.454 Y106.588 E.01735
G1 X107.085 Y103.957 E.11884
G1 X107.085 Y103.413 E.01735
G1 X103.912 Y106.586 E.14333
G1 X103.912 Y106.043 E.01735
G1 X106.543 Y103.412 E.11884
G1 X106 Y103.412 E.01735
G1 X103.912 Y105.5 E.0943
G1 X103.912 Y104.957 E.01735
G1 X105.457 Y103.412 E.06976
G1 X104.913 Y103.412 E.01735
G1 X103.912 Y104.413 E.04522
G1 X103.912 Y103.87 E.01735
G1 X104.531 Y103.252 E.02794
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:51.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;51.8








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X103.912 Y103.87 E-.20194
G1 X103.912 Y104.413 E-.12544
G1 X104.913 Y103.412 E-.32687
G1 X105.371 Y103.412 E-.10575
;WIPE_END
G1 E-.04 F2100
G1 Z52 F720
;AFTER_LAYER_CHANGE
;51.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.573 Y103.075 F10800
G1 Z51.8 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F900
G1 X146.425 Y103.075 E.1304
G1 X146.425 Y106.925 E.13032
G1 X142.573 Y106.925 E.1304
G1 X142.573 Y103.135 E.12829
M204 S1000
M73 P92 R3
G1 X142.469 Y102.689 F10800
G1 X142.223 Y102.725
M204 S800
G1 F900
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
M73 Q92 S3
G1 X142.223 Y102.785 E.15198
M204 S1000
G1 X142.609 Y102.828 F10800
;WIPE_START
G1 F8640
G1 X145.514 Y102.742 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z52.2 F720
G1 X107.423 Y103.075 F10800
G1 Z51.8 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X107.423 Y106.925 E.13032
G1 X103.575 Y106.925 E.13024
G1 X103.575 Y103.075 E.13032
G1 X107.363 Y103.075 E.12821
M204 S1000
G1 X107.809 Y102.971 F10800
G1 X107.773 Y102.725
M204 S800
G1 F900
G1 X107.773 Y107.275 E.15401
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.713 Y102.725 E.1519
M204 S1000
G1 X107.669 Y103.111 F10800
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:52
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;52








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X107.756 Y106.016 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z52.2 F720
;AFTER_LAYER_CHANGE
;52
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.573 Y106.925 F10800
G1 Z52 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X142.573 Y103.075 E.13032
G1 X146.425 Y103.075 E.1304
G1 X146.425 Y106.925 E.13032
G1 X142.633 Y106.925 E.12837
M204 S1000
G1 X142.186 Y107.028 F10800
G1 X142.223 Y107.275
M204 S800
G1 F900
G1 X142.223 Y102.725 E.15401
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.283 Y107.275 E.15206
M204 S1000
G1 X142.326 Y106.889 F10800
;WIPE_START
G1 F8640
G1 X142.239 Y103.984 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z52.4 F720
G1 X107.423 Y106.925 F10800
G1 Z52 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X103.575 Y106.925 E.13024
G1 X103.575 Y103.075 E.13032
G1 X107.423 Y103.075 E.13024
G1 X107.423 Y106.865 E.12829
M204 S1000
G1 X107.526 Y107.311 F10800
G1 X107.773 Y107.275
M204 S800
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:52.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;52.2








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z52.4 F720
;AFTER_LAYER_CHANGE
;52.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.573 Y106.925 F10800
G1 Z52.2 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X142.573 Y103.075 E.13032
G1 X146.425 Y103.075 E.1304
G1 X146.425 Y106.925 E.13032
G1 X142.633 Y106.925 E.12837
M204 S1000
G1 X142.186 Y107.028 F10800
G1 X142.223 Y107.275
M204 S800
G1 F900
G1 X142.223 Y102.725 E.15401
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.283 Y107.275 E.15206
M204 S1000
G1 X142.326 Y106.889 F10800
;WIPE_START
G1 F8640
G1 X142.239 Y103.984 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z52.6 F720
G1 X107.423 Y106.925 F10800
G1 Z52.2 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X103.575 Y106.925 E.13024
G1 X103.575 Y103.075 E.13032
G1 X107.423 Y103.075 E.13024
G1 X107.423 Y106.865 E.12829
M204 S1000
G1 X107.526 Y107.311 F10800
G1 X107.773 Y107.275
M204 S800
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:52.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;52.4








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z52.6 F720
;AFTER_LAYER_CHANGE
;52.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.573 Y106.925 F10800
G1 Z52.4 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X142.573 Y103.075 E.13032
G1 X146.425 Y103.075 E.1304
G1 X146.425 Y106.925 E.13032
G1 X142.633 Y106.925 E.12837
M204 S1000
G1 X142.186 Y107.028 F10800
G1 X142.223 Y107.275
M204 S800
G1 F900
G1 X142.223 Y102.725 E.15401
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.283 Y107.275 E.15206
M204 S1000
G1 X142.326 Y106.889 F10800
;WIPE_START
G1 F8640
G1 X142.239 Y103.984 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z52.8 F720
G1 X107.423 Y106.925 F10800
G1 Z52.4 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X103.575 Y106.925 E.13024
G1 X103.575 Y103.075 E.13032
G1 X107.423 Y103.075 E.13024
G1 X107.423 Y106.865 E.12829
M204 S1000
G1 X107.526 Y107.311 F10800
G1 X107.773 Y107.275
M204 S800
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:52.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;52.6








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z52.8 F720
;AFTER_LAYER_CHANGE
;52.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.573 Y106.925 F10800
G1 Z52.6 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X142.573 Y103.075 E.13032
G1 X146.425 Y103.075 E.1304
G1 X146.425 Y106.925 E.13032
G1 X142.633 Y106.925 E.12837
M204 S1000
G1 X142.186 Y107.028 F10800
G1 X142.223 Y107.275
M204 S800
G1 F900
G1 X142.223 Y102.725 E.15401
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.283 Y107.275 E.15206
M204 S1000
G1 X142.326 Y106.889 F10800
;WIPE_START
G1 F8640
G1 X142.239 Y103.984 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z53 F720
G1 X107.423 Y106.925 F10800
G1 Z52.6 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X103.575 Y106.925 E.13024
G1 X103.575 Y103.075 E.13032
G1 X107.423 Y103.075 E.13024
G1 X107.423 Y106.865 E.12829
M204 S1000
G1 X107.526 Y107.311 F10800
G1 X107.773 Y107.275
M204 S800
G1 F900
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y107.215 E.15198
M204 S1000
G1 X107.386 Y107.171 F10800
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:52.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;52.8








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X104.481 Y107.258 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z53 F720
;AFTER_LAYER_CHANGE
;52.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.573 Y106.925 F10800
G1 Z52.8 F720
M73 P93 R3
G1 E.8 F2100
M204 S800
G1 F900
G1 X142.573 Y103.075 E.13032
G1 X146.425 Y103.075 E.1304
M73 Q93 S3
G1 X146.425 Y106.925 E.13032
G1 X142.633 Y106.925 E.12837
M204 S1000
G1 X142.186 Y107.028 F10800
G1 X142.223 Y107.275
M204 S800
G1 F900
G1 X142.223 Y102.725 E.15401
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.283 Y107.275 E.15206
M204 S1000
G1 X142.326 Y106.889 F10800
;WIPE_START
G1 F8640
G1 X142.239 Y103.984 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z53.2 F720
G1 X106.356 Y103.075 F10800
G1 Z52.8 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X105.98 Y103.075 E.01271
G1 X105.98 Y102.725 E.01185
G1 X106.356 Y102.725 E.01271
G1 X106.356 Y103.015 E.00982
M204 S1000
G1 X105.992 Y102.982 F10800
;WIPE_START
G1 F8640
G1 X105.98 Y103.075 E-.0878
G1 X105.98 Y102.725 E-.08082
G1 X106.356 Y102.725 E-.0867
G1 X106.356 Y103.015 E-.06696
;WIPE_END
G1 E-.47771 F2100
G1 Z53.2 F720
G1 X104.739 Y103.075 F10800
G1 Z52.8 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X104.349 Y103.075 E.01321
G1 X104.349 Y102.725 E.01185
G1 X104.739 Y102.725 E.01321
G1 X104.739 Y103.015 E.00982
M204 S1000
G1 X104.361 Y102.981 F10800
;WIPE_START
G1 F8640
G1 X104.349 Y103.075 E-.09118
G1 X104.349 Y102.725 E-.08082
G1 X104.739 Y102.725 E-.09012
G1 X104.739 Y103.015 E-.06696
;WIPE_END
G1 E-.47091 F2100
G1 Z53.2 F720
G1 X103.575 Y106.925 F10800
G1 Z52.8 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X107.423 Y106.925 E.13024
G1 X107.423 Y103.125 E.12863
G1 X107.564 Y103.125 E.00478
G1 X107.564 Y102.725 E.01354
G1 X107.773 Y102.725 E.00707
G1 X107.773 Y107.275 E.15401
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.653 Y102.725 E.01449
G1 X103.653 Y103.075 E.01185
G1 X103.575 Y103.075 E.00264
G1 X103.575 Y106.865 E.12829
M204 S1000
G1 X103.572 Y107.325 F10800
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:53
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;53








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X106.866 Y106.916 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z53.2 F720
;AFTER_LAYER_CHANGE
;53
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.573 Y106.925 F10800
G1 Z53 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X142.573 Y103.075 E.13032
G1 X146.425 Y103.075 E.1304
G1 X146.425 Y106.925 E.13032
G1 X142.633 Y106.925 E.12837
M204 S1000
G1 X142.186 Y107.028 F10800
G1 X142.223 Y107.275
M204 S800
G1 F900
G1 X142.223 Y105.773 E.05084
G1 X142.103 Y105.773 E.00403
G1 X142.103 Y104.223 E.05247
G1 X142.223 Y104.223 E.00403
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.283 Y107.275 E.15206
M204 S1000
G1 X142.326 Y106.889 F10800
;WIPE_START
G1 F8640
G1 X142.223 Y105.773 E-.34709
G1 X142.103 Y105.773 E-.02752
G1 X142.103 Y104.223 E-.3579
G1 X142.222 Y104.223 E-.02748
;WIPE_END
G1 E-.04 F2100
G1 Z53.4 F720
G1 X142.338 Y105.569 F10800
G1 Z53 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.105034
G1 F900
G1 X142.338 Y104.427 E.0059
;WIPE_START
G1 F8640
G1 X142.338 Y105.569 E-.2639
;WIPE_END
G1 E-.5361 F2100
G1 Z53.4 F720
G1 X106.992 Y103.075 F10800
G1 Z53 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F900
G1 X106.925 Y103.075 E.00227
G1 X106.925 Y102.725 E.01185
G1 X106.992 Y102.725 E.00227
G1 X106.992 Y103.015 E.00982
M204 S1000
G1 X106.932 Y103.045 F10800
G1 X106.214 Y103.075
M204 S800
G1 F900
G1 X106.148 Y103.075 E.00225
G1 X106.148 Y102.725 E.01185
G1 X106.214 Y102.725 E.00225
G1 X106.214 Y103.015 E.00982
M204 S1000
G1 X106.155 Y103.045 F10800
G1 X105.427 Y103.075
M204 S800
G1 F900
G1 X105.32 Y103.075 E.00361
G1 X105.32 Y102.725 E.01185
G1 X105.427 Y102.725 E.00361
G1 X105.427 Y103.015 E.00982
M204 S1000
G1 X105.329 Y103.031 F10800
G1 X104.604 Y103.075
M204 S800
G1 F900
G1 X104.349 Y103.075 E.00863
G1 X104.349 Y102.725 E.01185
G1 X104.604 Y102.725 E.00863
G1 X104.604 Y103.015 E.00982
M204 S1000
G1 X104.361 Y102.996 F10800
;WIPE_START
G1 F8640
G1 X104.349 Y103.075 E-.06049
G1 X104.349 Y102.725 E-.08082
G1 X104.604 Y102.725 E-.05888
G1 X104.604 Y103.015 E-.06696
;WIPE_END
G1 E-.53285 F2100
G1 Z53.4 F720
G1 X103.575 Y106.925 F10800
G1 Z53 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X107.423 Y106.925 E.13024
G1 X107.423 Y103.125 E.12863
G1 X107.713 Y103.125 E.00982
G1 X107.713 Y102.725 E.01354
G1 X107.773 Y102.725 E.00203
G1 X107.773 Y104.223 E.05071
G1 X107.821 Y104.223 E.00165
G1 X107.821 Y105.773 E.05247
G1 X107.773 Y105.773 E.00165
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.653 Y102.725 E.01449
G1 X103.653 Y103.075 E.01185
G1 X103.575 Y103.075 E.00264
G1 X103.575 Y106.865 E.12829
M204 S1000
G1 X103.572 Y107.325 F10800
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:53.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;53.2








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X106.866 Y106.916 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z53.4 F720
;AFTER_LAYER_CHANGE
;53.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.573 Y106.925 F10800
G1 Z53.2 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X142.573 Y103.075 E.13032
G1 X146.425 Y103.075 E.1304
G1 X146.425 Y106.925 E.13032
G1 X142.633 Y106.925 E.12837
M204 S1000
G1 X142.186 Y107.028 F10800
;WIPE_START
G1 F8640
G1 X142.581 Y103.634 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z53.6 F720
G1 X142.223 Y105.773 F10800
G1 Z53.2 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X141.865 Y105.773 E.0121
G1 X141.865 Y104.223 E.05247
G1 X142.223 Y104.223 E.0121
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.078 Y105.446 F10800
G1 X142.219 Y105.569
;TYPE:Gap fill
;WIDTH:0.343426
G1 F900
G1 X142.219 Y104.427 E.02856
;WIPE_START
G1 F8640
G1 X142.219 Y105.569 E-.2639
;WIPE_END
G1 E-.5361 F2100
G1 Z53.6 F720
G1 X107.082 Y103.075 F10800
G1 Z53.2 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F900
G1 X106.835 Y103.075 E.00835
G1 X106.835 Y102.725 E.01185
G1 X107.082 Y102.725 E.00835
G1 X107.082 Y103.015 E.00982
M204 S1000
G1 X106.848 Y102.998 F10800
;WIPE_START
G1 F8640
G1 X106.835 Y103.075 E-.05859
G1 X106.835 Y102.725 E-.08082
G1 X107.082 Y102.725 E-.05693
G1 X107.082 Y103.015 E-.06696
;WIPE_END
G1 E-.5367 F2100
G1 Z53.6 F720
G1 X105.535 Y103.075 F10800
G1 Z53.2 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X104.349 Y103.075 E.04014
G1 X104.349 Y102.725 E.01185
G1 X105.535 Y102.725 E.04014
G1 X105.535 Y103.015 E.00982
M204 S1000
G1 X105.137 Y103.037 F10800
;WIPE_START
G1 F8640
G1 X104.349 Y103.075 E-.27416
G1 X104.349 Y102.725 E-.08082
G1 X105.535 Y102.725 E-.27381
G1 X105.535 Y103.015 E-.06696
;WIPE_END
G1 E-.10425 F2100
G1 Z53.6 F720
G1 X103.575 Y106.925 F10800
G1 Z53.2 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X107.423 Y106.925 E.13024
G1 X107.423 Y105.423 E.05084
G1 X107.484 Y105.423 E.00206
G1 X107.484 Y104.573 E.02877
G1 X107.423 Y104.573 E.00206
G1 X107.423 Y103.125 E.04901
G1 X107.773 Y103.125 E.01185
G1 X107.773 Y104.223 E.03717
G1 X107.919 Y104.223 E.00494
G1 X107.919 Y105.773 E.05247
G1 X107.773 Y105.773 E.00494
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.653 Y102.725 E.01449
G1 X103.653 Y103.075 E.01185
G1 X103.575 Y103.075 E.00264
G1 X103.575 Y106.865 E.12829
M204 S1000
G1 X103.572 Y107.325 F10800
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:53.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;53.4








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X106.866 Y106.916 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z53.6 F720
;AFTER_LAYER_CHANGE
;53.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.573 Y106.925 F10800
G1 Z53.4 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X142.573 Y105.423 E.05084
G1 X142.42 Y105.423 E.00516
G1 X142.42 Y104.573 E.02877
G1 X142.573 Y104.573 E.00516
G1 X142.573 Y103.075 E.05071
G1 X146.425 Y103.075 E.1304
G1 X146.425 Y106.925 E.13032
G1 X142.633 Y106.925 E.12837
M204 S1000
G1 X142.186 Y107.028 F10800
;WIPE_START
M73 P93 R2
G1 F8640
G1 X142.573 Y105.423 E-.34709
G1 X142.42 Y105.423 E-.03518
G1 X142.42 Y104.573 E-.19627
G1 X142.573 Y104.573 E-.03518
G1 X142.573 Y103.94 E-.14627
;WIPE_END
G1 E-.04 F2100
G1 Z53.8 F720
G1 X142.223 Y105.773 F10800
G1 Z53.4 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X141.627 Y105.773 E.02017
G1 X141.627 Y104.223 E.05247
G1 X142.223 Y104.223 E.02017
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
G1 X142.023 Y105.569
;TYPE:Gap fill
;WIDTH:0.429452
G1 F900
G1 X142.023 Y104.427 E.03673
;WIPE_START
G1 F8640
G1 X142.023 Y105.569 E-.2639
;WIPE_END
G1 E-.5361 F2100
G1 Z53.8 F720
G1 X107.123 Y103.075 F10800
G1 Z53.4 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F900
G1 X106.795 Y103.075 E.01112
G1 X106.795 Y102.725 E.01185
G1 X107.123 Y102.725 E.01112
G1 X107.123 Y103.015 E.00982
M204 S1000
G1 X106.807 Y102.987 F10800
;WIPE_START
G1 F8640
G1 X106.795 Y103.075 E-.07709
G1 X106.795 Y102.725 E-.08082
G1 X107.123 Y102.725 E-.07584
G1 X107.123 Y103.015 E-.06696
;WIPE_END
G1 E-.49929 F2100
G1 Z53.8 F720
G1 X104.961 Y103.015 F10800
M73 Q93 S2
G1 Z53.4 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X104.961 Y103.075 E.00203
G1 X104.349 Y103.075 E.02071
G1 X104.349 Y102.725 E.01185
G1 X104.961 Y102.725 E.02071
G1 X104.961 Y102.955 E.00779
M204 S1000
G1 X104.923 Y103.062 F10800
;WIPE_START
G1 F8640
G1 X104.961 Y103.075 E-.02771
G1 X104.349 Y103.075 E-.14126
G1 X104.349 Y102.725 E-.08082
G1 X104.961 Y102.725 E-.14126
G1 X104.961 Y102.955 E-.05311
;WIPE_END
G1 E-.35584 F2100
G1 Z53.8 F720
G1 X103.575 Y106.925 F10800
G1 Z53.4 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X107.423 Y106.925 E.13024
G1 X107.423 Y105.423 E.05084
G1 X107.575 Y105.423 E.00516
G1 X107.575 Y104.573 E.02877
G1 X107.423 Y104.573 E.00516
G1 X107.423 Y103.125 E.04901
G1 X107.773 Y103.125 E.01185
G1 X107.773 Y104.223 E.03717
G1 X108.03 Y104.223 E.0087
G1 X108.03 Y105.773 E.05247
G1 X107.773 Y105.773 E.0087
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.653 Y102.725 E.01449
G1 X103.653 Y103.075 E.01185
G1 X103.575 Y103.075 E.00264
G1 X103.575 Y106.865 E.12829
M204 S1000
G1 X103.572 Y107.325 F10800
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:53.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;53.6








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X106.866 Y106.916 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z53.8 F720
;AFTER_LAYER_CHANGE
;53.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X142.182 Y105.423 F10800
G1 Z53.6 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X142.182 Y104.573 E.02877
G1 X142.573 Y104.573 E.01322
G1 X142.573 Y103.075 E.05071
G1 X146.425 Y103.075 E.1304
G1 X146.425 Y106.925 E.13032
G1 X142.573 Y106.925 E.1304
G1 X142.573 Y105.423 E.05084
M73 P94 R2
M73 Q94 S2
G1 X142.242 Y105.423 E.01119
M204 S1000
G1 X141.82 Y105.253 F10800
G1 X142.182 Y105.773
M204 S800
G1 F900
G1 X141.388 Y105.773 E.02687
G1 X141.388 Y104.223 E.05247
G1 X142.223 Y104.223 E.02824
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.792 E.05018
M204 S1000
G1 X142.02 Y105.407 F10800
G1 X141.785 Y105.569
;TYPE:Gap fill
;WIDTH:0.429644
G1 F900
G1 X141.785 Y104.427 E.03675
;WIPE_START
G1 F8640
G1 X141.785 Y105.569 E-.2639
;WIPE_END
G1 E-.5361 F2100
G1 Z54 F720
G1 X107.133 Y103.075 F10800
G1 Z53.6 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F900
G1 X106.785 Y103.075 E.01178
G1 X106.785 Y102.725 E.01185
G1 X107.133 Y102.725 E.01178
G1 X107.133 Y103.015 E.00982
M204 S1000
G1 X106.797 Y102.985 F10800
;WIPE_START
G1 F8640
G1 X106.785 Y103.075 E-.08155
G1 X106.785 Y102.725 E-.08082
G1 X107.133 Y102.725 E-.08036
G1 X107.133 Y103.015 E-.06696
;WIPE_END
G1 E-.49031 F2100
G1 Z54 F720
G1 X104.668 Y103.015 F10800
G1 Z53.6 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X104.668 Y103.075 E.00203
G1 X104.349 Y103.075 E.01079
G1 X104.349 Y102.725 E.01185
G1 X104.668 Y102.725 E.01079
G1 X104.668 Y102.955 E.00779
M204 S1000
G1 X104.626 Y103.058 F10800
;WIPE_START
G1 F8640
G1 X104.668 Y103.075 E-.02771
G1 X104.349 Y103.075 E-.07364
G1 X104.349 Y102.725 E-.08082
G1 X104.668 Y102.725 E-.07364
G1 X104.668 Y102.955 E-.05311
;WIPE_END
G1 E-.49109 F2100
G1 Z54 F720
G1 X103.575 Y106.925 F10800
G1 Z53.6 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X107.423 Y106.925 E.13024
G1 X107.423 Y105.423 E.05084
G1 X107.676 Y105.423 E.00859
G1 X107.676 Y104.573 E.02877
G1 X107.423 Y104.573 E.00859
G1 X107.423 Y103.125 E.04901
G1 X107.773 Y103.125 E.01185
G1 X107.773 Y104.223 E.03717
G1 X108.149 Y104.223 E.01274
G1 X108.149 Y105.773 E.05247
G1 X107.773 Y105.773 E.01274
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.653 Y102.725 E.01449
G1 X103.653 Y103.075 E.01185
G1 X103.575 Y103.075 E.00264
G1 X103.575 Y106.865 E.12829
M204 S1000
G1 X103.572 Y107.325 F10800
;WIPE_START
G1 F8640
G1 X106.866 Y106.916 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z54 F720
G1 X107.913 Y105.569 F10800
G1 Z53.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.108504
G1 F900
G1 X107.913 Y104.427 E.00623
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:53.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;53.8








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X107.913 Y105.569 E-.2639
;WIPE_END
G1 E-.5361 F2100
G1 Z54 F720
;AFTER_LAYER_CHANGE
;53.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X141.944 Y105.423 F10800
G1 Z53.8 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F900
G1 X141.944 Y104.573 E.02877
G1 X142.573 Y104.573 E.02128
G1 X142.573 Y103.075 E.05071
G1 X146.425 Y103.075 E.1304
G1 X146.425 Y106.925 E.13032
G1 X142.573 Y106.925 E.1304
G1 X142.573 Y105.423 E.05084
G1 X142.004 Y105.423 E.01925
M204 S1000
G1 X141.574 Y105.27 F10800
G1 X142.223 Y105.773
M204 S800
G1 F900
G1 X141.15 Y105.773 E.03631
G1 X141.15 Y104.223 E.05247
G1 X142.223 Y104.223 E.03631
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
G1 X141.547 Y105.569
;TYPE:Gap fill
;WIDTH:0.429836
G1 F900
G1 X141.547 Y104.427 E.03677
;WIPE_START
G1 F8640
G1 X141.547 Y105.569 E-.2639
;WIPE_END
G1 E-.5361 F2100
G1 Z54.2 F720
G1 X107.133 Y103.075 F10800
G1 Z53.8 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F900
G1 X106.785 Y103.075 E.01178
G1 X106.785 Y102.725 E.01185
G1 X107.133 Y102.725 E.01178
G1 X107.133 Y103.015 E.00982
M204 S1000
G1 X106.797 Y102.985 F10800
;WIPE_START
G1 F8640
G1 X106.785 Y103.075 E-.08155
G1 X106.785 Y102.725 E-.08082
G1 X107.133 Y102.725 E-.08036
G1 X107.133 Y103.015 E-.06696
;WIPE_END
G1 E-.49031 F2100
G1 Z54.2 F720
G1 X105.516 Y103.075 F10800
G1 Z53.8 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X105.284 Y103.075 E.00786
G1 X105.284 Y102.725 E.01185
G1 X105.516 Y102.725 E.00786
G1 X105.516 Y103.015 E.00982
M204 S1000
G1 X105.296 Y103 F10800
G1 X104.56 Y103.075
M204 S800
G1 F900
G1 X104.349 Y103.075 E.00715
G1 X104.349 Y102.725 E.01185
G1 X104.56 Y102.725 E.00715
G1 X104.56 Y103.015 E.00982
M204 S1000
G1 X104.361 Y103.004 F10800
;WIPE_START
G1 F8640
G1 X104.349 Y103.075 E-.0507
G1 X104.349 Y102.725 E-.08082
G1 X104.56 Y102.725 E-.04877
G1 X104.56 Y103.015 E-.06696
;WIPE_END
G1 E-.55276 F2100
G1 Z54.2 F720
G1 X103.575 Y106.925 F10800
G1 Z53.8 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X107.423 Y106.925 E.13024
G1 X107.423 Y105.423 E.05084
G1 X107.787 Y105.423 E.01234
G1 X107.787 Y104.573 E.02877
G1 X107.423 Y104.573 E.01234
G1 X107.423 Y103.125 E.04901
G1 X107.773 Y103.125 E.01185
G1 X107.773 Y104.223 E.03717
G1 X108.277 Y104.223 E.01708
G1 X108.277 Y105.773 E.05247
G1 X107.773 Y105.773 E.01708
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.653 Y102.725 E.01449
G1 X103.653 Y103.075 E.01185
G1 X103.575 Y103.075 E.00264
G1 X103.575 Y106.865 E.12829
M204 S1000
G1 X103.572 Y107.325 F10800
;WIPE_START
G1 F8640
G1 X106.866 Y106.916 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z54.2 F720
G1 X108.032 Y105.569 F10800
G1 Z53.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.125782
G1 F900
G1 X108.032 Y104.427 E.00787
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:54
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;54








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X108.032 Y105.569 E-.2639
;WIPE_END
G1 E-.5361 F2100
G1 Z54.2 F720
;AFTER_LAYER_CHANGE
;54
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X141.706 Y105.423 F10800
G1 Z54 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F900
G1 X141.706 Y104.573 E.02877
G1 X142.573 Y104.573 E.02935
G1 X142.573 Y103.075 E.05071
G1 X146.425 Y103.075 E.1304
G1 X146.425 Y106.925 E.13032
G1 X142.573 Y106.925 E.1304
G1 X142.573 Y105.423 E.05084
G1 X141.766 Y105.423 E.02732
M204 S1000
G1 X141.33 Y105.286 F10800
G1 X142.223 Y105.773
M204 S800
G1 F900
G1 X140.911 Y105.773 E.04438
G1 X140.911 Y104.223 E.05247
G1 X142.223 Y104.223 E.04438
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
G1 X141.309 Y105.569
;TYPE:Gap fill
;WIDTH:0.430028
G1 F900
G1 X141.309 Y104.427 E.03679
;WIPE_START
G1 F8640
G1 X141.309 Y105.569 E-.2639
;WIPE_END
G1 E-.5361 F2100
G1 Z54.4 F720
G1 X107.121 Y103.075 F10800
G1 Z54 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F900
G1 X106.798 Y103.075 E.01092
G1 X106.798 Y102.725 E.01185
G1 X107.121 Y102.725 E.01092
G1 X107.121 Y103.015 E.00982
M204 S1000
G1 X106.81 Y102.987 F10800
;WIPE_START
G1 F8640
G1 X106.798 Y103.075 E-.07576
G1 X106.798 Y102.725 E-.08082
G1 X107.121 Y102.725 E-.07449
G1 X107.121 Y103.015 E-.06696
;WIPE_END
G1 E-.50197 F2100
G1 Z54.4 F720
G1 X105.568 Y103.075 F10800
G1 Z54 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X105.233 Y103.075 E.01135
G1 X105.233 Y102.725 E.01185
G1 X105.568 Y102.725 E.01135
G1 X105.568 Y103.015 E.00982
M204 S1000
G1 X105.245 Y102.986 F10800
;WIPE_START
G1 F8640
G1 X105.233 Y103.075 E-.07864
G1 X105.233 Y102.725 E-.08082
G1 X105.568 Y102.725 E-.07741
G1 X105.568 Y103.015 E-.06696
;WIPE_END
G1 E-.49618 F2100
G1 Z54.4 F720
G1 X104.53 Y103.075 F10800
G1 Z54 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X104.349 Y103.075 E.00612
G1 X104.349 Y102.725 E.01185
G1 X104.53 Y102.725 E.00612
G1 X104.53 Y103.015 E.00982
M204 S1000
G1 X104.361 Y103.011 F10800
;WIPE_START
G1 F8640
G1 X104.349 Y103.075 E-.044
G1 X104.349 Y102.725 E-.08082
G1 X104.53 Y102.725 E-.04176
G1 X104.53 Y103.015 E-.06696
;WIPE_END
G1 E-.56646 F2100
G1 Z54.4 F720
G1 X103.575 Y106.925 F10800
G1 Z54 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X107.423 Y106.925 E.13024
G1 X107.423 Y105.423 E.05084
G1 X107.906 Y105.423 E.01634
G1 X107.906 Y104.573 E.02877
G1 X107.423 Y104.573 E.01634
G1 X107.423 Y103.125 E.04901
G1 X107.773 Y103.125 E.01185
G1 X107.773 Y104.223 E.03717
G1 X108.418 Y104.223 E.02186
G1 X108.418 Y105.773 E.05247
G1 X107.773 Y105.773 E.02186
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.653 Y102.725 E.01449
G1 X103.653 Y103.075 E.01185
G1 X103.575 Y103.075 E.00264
G1 X103.575 Y106.865 E.12829
M204 S1000
G1 X103.572 Y107.325 F10800
;WIPE_START
G1 F8640
G1 X106.866 Y106.916 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z54.4 F720
G1 X108.162 Y105.569 F10800
G1 Z54 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.148768
G1 F900
G1 X108.162 Y104.427 E.01006
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:54.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;54.2








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X108.162 Y105.569 E-.2639
;WIPE_END
G1 E-.5361 F2100
G1 Z54.4 F720
;AFTER_LAYER_CHANGE
;54.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X141.467 Y105.423 F10800
G1 Z54.2 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F900
G1 X141.467 Y104.573 E.02877
G1 X142.573 Y104.573 E.03741
G1 X142.573 Y103.075 E.05071
G1 X146.425 Y103.075 E.1304
G1 X146.425 Y106.925 E.13032
G1 X142.573 Y106.925 E.1304
G1 X142.573 Y105.423 E.05084
G1 X141.527 Y105.423 E.03538
M204 S1000
G1 X141.087 Y105.3 F10800
G1 X142.223 Y105.773
M204 S800
G1 F900
G1 X140.673 Y105.773 E.05245
G1 X140.673 Y104.223 E.05247
G1 X142.223 Y104.223 E.05245
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.673 Y105.773 E-.35807
G1 X140.673 Y104.223 E-.3579
G1 X140.864 Y104.223 E-.04403
;WIPE_END
G1 E-.04 F2100
G1 Z54.6 F720
G1 X141.07 Y105.569 F10800
G1 Z54.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.430222
G1 F900
G1 X141.07 Y104.427 E.03681
;WIPE_START
G1 F8640
G1 X141.07 Y105.569 E-.2639
;WIPE_END
G1 E-.5361 F2100
G1 Z54.6 F720
G1 X107.073 Y103.075 F10800
G1 Z54.2 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F900
G1 X106.845 Y103.075 E.00772
G1 X106.845 Y102.725 E.01185
G1 X107.073 Y102.725 E.00772
G1 X107.073 Y103.015 E.00982
M204 S1000
G1 X106.857 Y103.001 F10800
;WIPE_START
G1 F8640
G1 X106.845 Y103.075 E-.05447
G1 X106.845 Y102.725 E-.08082
G1 X107.073 Y102.725 E-.05267
G1 X107.073 Y103.015 E-.06696
;WIPE_END
G1 E-.54508 F2100
G1 Z54.6 F720
G1 X105.551 Y103.075 F10800
G1 Z54.2 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X105.254 Y103.075 E.01006
G1 X105.254 Y102.725 E.01185
G1 X105.551 Y102.725 E.01006
G1 X105.551 Y103.015 E.00982
M204 S1000
G1 X105.267 Y102.99 F10800
;WIPE_START
G1 F8640
G1 X105.254 Y103.075 E-.06999
G1 X105.254 Y102.725 E-.08082
G1 X105.551 Y102.725 E-.0686
G1 X105.551 Y103.015 E-.06696
;WIPE_END
G1 E-.51364 F2100
G1 Z54.6 F720
G1 X104.545 Y103.075 F10800
G1 Z54.2 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X104.349 Y103.075 E.00663
G1 X104.349 Y102.725 E.01185
G1 X104.545 Y102.725 E.00663
G1 X104.545 Y103.015 E.00982
M204 S1000
G1 X104.361 Y103.007 F10800
G1 X103.575 Y103.125
M204 S800
G1 F900
G1 X103.575 Y106.925 E.12863
G1 X107.423 Y106.925 E.13024
G1 X107.423 Y105.423 E.05084
G1 X108.033 Y105.423 E.02065
G1 X108.033 Y104.573 E.02877
G1 X107.423 Y104.573 E.02065
G1 X107.423 Y103.125 E.04901
G1 X107.773 Y103.125 E.01185
G1 X107.773 Y104.223 E.03717
G1 X108.574 Y104.223 E.02713
G1 X108.574 Y105.773 E.05247
G1 X107.773 Y105.773 E.02713
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y103.125 E.14047
M73 Q95 S2
G1 X103.515 Y103.125 E.00982
M204 S1000
M73 P95 R2
G1 X103.564 Y103.525 F10800
;WIPE_START
G1 F8640
G1 X103.567 Y106.416 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z54.6 F720
G1 X108.303 Y104.427 F10800
G1 Z54.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.177296
G1 F900
G1 X108.303 Y105.569 E.01277
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:54.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;54.4








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X108.303 Y104.427 E-.2639
;WIPE_END
G1 E-.5361 F2100
G1 Z54.6 F720
;AFTER_LAYER_CHANGE
;54.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X141.229 Y104.573 F10800
G1 Z54.4 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F900
G1 X142.573 Y104.573 E.04547
G1 X142.573 Y103.075 E.05071
G1 X146.425 Y103.075 E.1304
G1 X146.425 Y106.925 E.13032
G1 X142.573 Y106.925 E.1304
G1 X142.573 Y105.423 E.05084
G1 X141.229 Y105.423 E.04547
G1 X141.229 Y104.633 E.02674
M204 S1000
G1 X141.098 Y104.195 F10800
;WIPE_START
G1 F8640
G1 X142.573 Y104.573 E-.3105
G1 X142.573 Y103.075 E-.34589
G1 X143.021 Y103.075 E-.10361
;WIPE_END
G1 E-.04 F2100
G1 Z54.8 F720
G1 X142.223 Y105.773 F10800
G1 Z54.4 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X140.435 Y105.773 E.06052
G1 X140.435 Y104.223 E.05247
G1 X142.223 Y104.223 E.06052
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.435 Y105.773 E-.41308
G1 X140.435 Y104.271 E-.34692
;WIPE_END
G1 E-.04 F2100
G1 Z54.8 F720
G1 X140.832 Y105.569 F10800
G1 Z54.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.430414
G1 F900
G1 X140.832 Y104.427 E.03683
;WIPE_START
G1 F8640
G1 X140.832 Y105.569 E-.2639
;WIPE_END
G1 E-.5361 F2100
G1 Z54.8 F720
G1 X106.966 Y103.075 F10800
G1 Z54.4 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F900
G1 X106.947 Y103.075 E.00065
G1 X106.947 Y102.725 E.01185
G1 X106.966 Y102.725 E.00065
G1 X106.966 Y103.015 E.00982
M204 S1000
G1 X106.949 Y103.066 F10800
G1 X106.219 Y103.075
M204 S800
G1 F900
G1 X106.156 Y103.075 E.00212
G1 X106.156 Y102.725 E.01185
G1 X106.219 Y102.725 E.00212
G1 X106.219 Y103.015 E.00982
M204 S1000
G1 X106.163 Y103.047 F10800
G1 X105.435 Y103.075
M204 S800
G1 F900
G1 X105.385 Y103.075 E.00167
G1 X105.385 Y102.725 E.01185
G1 X105.435 Y102.725 E.00167
G1 X105.435 Y103.015 E.00982
M204 S1000
G1 X105.391 Y103.052 F10800
G1 X104.621 Y103.075
M204 S800
G1 F900
G1 X104.349 Y103.075 E.00922
G1 X104.349 Y102.725 E.01185
G1 X104.621 Y102.725 E.00922
G1 X104.621 Y103.015 E.00982
M204 S1000
G1 X104.361 Y102.994 F10800
;WIPE_START
G1 F8640
G1 X104.349 Y103.075 E-.06443
G1 X104.349 Y102.725 E-.08082
G1 X104.621 Y102.725 E-.06292
G1 X104.621 Y103.015 E-.06696
;WIPE_END
G1 E-.52488 F2100
G1 Z54.8 F720
G1 X103.575 Y106.925 F10800
G1 Z54.4 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X107.423 Y106.925 E.13024
G1 X107.423 Y105.423 E.05084
G1 X108.172 Y105.423 E.02537
G1 X108.172 Y104.573 E.02877
G1 X107.423 Y104.573 E.02537
G1 X107.423 Y103.125 E.04901
G1 X107.696 Y103.125 E.00927
G1 X107.696 Y102.725 E.01354
G1 X107.773 Y102.725 E.00258
G1 X107.773 Y104.223 E.05071
G1 X108.743 Y104.223 E.03285
G1 X108.743 Y105.773 E.05247
G1 X107.773 Y105.773 E.03285
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.473 Y102.725 E.0084
G1 X103.473 Y103.125 E.01354
G1 X103.575 Y103.125 E.00345
G1 X103.575 Y106.865 E.12659
M204 S1000
G1 X103.579 Y107.325 F10800
;WIPE_START
G1 F8640
G1 X106.866 Y106.916 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z54.8 F720
G1 X108.458 Y105.569 F10800
G1 Z54.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.206636
G1 F900
G1 X108.458 Y104.427 E.01556
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:54.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;54.6








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X108.458 Y105.569 E-.2639
;WIPE_END
G1 E-.5361 F2100
G1 Z54.8 F720
;AFTER_LAYER_CHANGE
;54.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X140.991 Y105.423 F10800
G1 Z54.6 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F900
G1 X140.991 Y104.573 E.02877
G1 X142.573 Y104.573 E.05353
G1 X142.573 Y103.075 E.05071
G1 X146.425 Y103.075 E.1304
G1 X146.425 Y106.925 E.13032
G1 X142.573 Y106.925 E.1304
G1 X142.573 Y105.423 E.05084
G1 X141.051 Y105.423 E.0515
M204 S1000
G1 X140.604 Y105.323 F10800
;WIPE_START
G1 F8640
G1 X140.991 Y104.573 E-.19676
G1 X142.573 Y104.573 E-.36519
G1 X142.573 Y103.715 E-.19805
;WIPE_END
G1 E-.04 F2100
G1 Z55 F720
G1 X142.223 Y105.773 F10800
G1 Z54.6 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X140.196 Y105.773 E.06859
G1 X140.196 Y104.223 E.05247
G1 X142.223 Y104.223 E.06859
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X140.196 Y105.773 E-.46809
G1 X140.196 Y104.509 E-.2919
;WIPE_END
G1 E-.04 F2100
G1 Z55 F720
G1 X140.594 Y105.569 F10800
G1 Z54.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.430606
G1 F900
G1 X140.594 Y104.427 E.03684
;WIPE_START
G1 F8640
G1 X140.594 Y105.569 E-.2639
;WIPE_END
G1 E-.5361 F2100
G1 Z55 F720
G1 X106.387 Y103.075 F10800
G1 Z54.6 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F900
G1 X105.965 Y103.075 E.01426
G1 X105.965 Y102.725 E.01185
G1 X106.387 Y102.725 E.01426
G1 X106.387 Y103.015 E.00982
M204 S1000
G1 X105.997 Y102.983 F10800
;WIPE_START
G1 F8640
G1 X105.965 Y103.075 E-.09825
G1 X105.965 Y102.725 E-.08082
G1 X106.387 Y102.725 E-.09727
G1 X106.387 Y103.015 E-.06696
;WIPE_END
G1 E-.4567 F2100
G1 Z55 F720
G1 X104.805 Y103.075 F10800
G1 Z54.6 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X104.349 Y103.075 E.01543
G1 X104.349 Y102.725 E.01185
G1 X104.805 Y102.725 E.01543
G1 X104.805 Y103.015 E.00982
M204 S1000
G1 X104.414 Y102.988 F10800
;WIPE_START
G1 F8640
G1 X104.349 Y103.075 E-.10617
G1 X104.349 Y102.725 E-.08082
G1 X104.805 Y102.725 E-.10526
G1 X104.805 Y103.015 E-.06696
;WIPE_END
G1 E-.44079 F2100
G1 Z55 F720
G1 X103.575 Y106.925 F10800
G1 Z54.6 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X107.423 Y106.925 E.13024
G1 X107.423 Y105.423 E.05084
G1 X108.321 Y105.423 E.03041
G1 X108.321 Y104.573 E.02877
G1 X107.423 Y104.573 E.03041
G1 X107.423 Y103.125 E.04901
G1 X107.53 Y103.125 E.00364
G1 X107.53 Y102.725 E.01354
G1 X107.773 Y102.725 E.00821
G1 X107.773 Y104.223 E.05071
G1 X108.926 Y104.223 E.03906
G1 X108.926 Y105.773 E.05247
G1 X107.773 Y105.773 E.03906
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X103.67 Y102.725 E.01507
G1 X103.67 Y103.075 E.01185
G1 X103.575 Y103.075 E.00322
G1 X103.575 Y106.865 E.12829
M204 S1000
G1 X103.572 Y107.325 F10800
;WIPE_START
G1 F8640
G1 X106.866 Y106.916 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z55 F720
G1 X108.624 Y105.569 F10800
G1 Z54.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.241256
G1 F900
G1 X108.624 Y104.427 E.01885
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:54.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;54.8








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X108.624 Y105.569 E-.2639
;WIPE_END
G1 E-.5361 F2100
G1 Z55 F720
;AFTER_LAYER_CHANGE
;54.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X140.753 Y105.423 F10800
G1 Z54.8 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F900
G1 X140.753 Y104.573 E.02877
G1 X142.573 Y104.573 E.0616
G1 X142.573 Y103.075 E.05071
G1 X146.425 Y103.075 E.1304
G1 X146.425 Y106.925 E.13032
G1 X142.573 Y106.925 E.1304
G1 X142.573 Y105.423 E.05084
G1 X140.813 Y105.423 E.05957
M204 S1000
G1 X140.363 Y105.332 F10800
;WIPE_START
G1 F8640
G1 X140.753 Y104.573 E-.19676
G1 X142.573 Y104.573 E-.4202
G1 X142.573 Y103.953 E-.14305
;WIPE_END
G1 E-.04 F2100
G1 Z55.2 F720
G1 X142.223 Y105.773 F10800
G1 Z54.8 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X139.958 Y105.773 E.07666
G1 X139.958 Y104.223 E.05247
G1 X142.223 Y104.223 E.07666
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.958 Y105.773 E-.52312
G1 X139.958 Y104.747 E-.23688
;WIPE_END
G1 E-.04 F2100
G1 Z55.2 F720
G1 X140.355 Y105.569 F10800
G1 Z54.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.4308
G1 F900
G1 X140.355 Y104.427 E.03686
;WIPE_START
G1 F8640
G1 X140.355 Y105.569 E-.2639
;WIPE_END
G1 E-.5361 F2100
G1 Z55.2 F720
G1 X108.48 Y104.573 F10800
G1 Z54.8 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F900
G1 X108.48 Y105.423 E.02877
G1 X107.423 Y105.423 E.0358
G1 X107.423 Y106.925 E.05084
G1 X103.575 Y106.925 E.13024
G1 X103.575 Y103.075 E.13032
G1 X107.423 Y103.075 E.13024
G1 X107.423 Y104.573 E.05071
G1 X108.42 Y104.573 E.03377
M204 S1000
G1 X108.86 Y104.698 F10800
G1 X107.773 Y104.223
M204 S800
G1 F900
G1 X109.126 Y104.223 E.04579
G1 X109.126 Y105.773 E.05247
G1 X107.773 Y105.773 E.04579
M73 P95 R1
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.126 Y104.223 E-.3127
G1 X109.126 Y105.773 E-.3579
G1 X108.738 Y105.773 E-.0894
;WIPE_END
G1 E-.04 F2100
G1 Z55.2 F720
G1 X108.803 Y104.427 F10800
G1 Z54.8 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.28121
G1 F900
G1 X108.803 Y105.569 E.02265
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:55
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;55








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X108.803 Y104.427 E-.2639
;WIPE_END
G1 E-.5361 F2100
G1 Z55.2 F720
;AFTER_LAYER_CHANGE
;55
; printing object Fast Temp Tower PLA v4 id:0 copy 0
M73 Q95 S1
G1 X140.515 Y104.573 F10800
G1 Z55 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F900
G1 X142.573 Y104.573 E.06966
G1 X142.573 Y103.075 E.05071
G1 X146.425 Y103.075 E.1304
G1 X146.425 Y106.925 E.13032
G1 X142.573 Y106.925 E.1304
G1 X142.573 Y105.423 E.05084
G1 X140.515 Y105.423 E.06966
G1 X140.515 Y104.633 E.02674
M204 S1000
G1 X140.361 Y104.203 F10800
;WIPE_START
G1 F8640
G1 X142.573 Y104.573 E-.4754
G1 X142.573 Y103.34 E-.2846
;WIPE_END
G1 E-.04 F2100
G1 Z55.4 F720
G1 X142.223 Y105.773 F10800
G1 Z55 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X139.72 Y105.773 E.08473
G1 X139.72 Y104.223 E.05247
G1 X142.223 Y104.223 E.08473
M73 Q96 S1
G1 X142.223 Y102.725 E.05071
M73 P96 R1
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.72 Y105.773 E-.57815
G1 X139.72 Y104.985 E-.18185
;WIPE_END
G1 E-.04 F2100
G1 Z55.4 F720
G1 X140.117 Y105.569 F10800
G1 Z55 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.430992
G1 F900
G1 X140.117 Y104.427 E.03688
;WIPE_START
G1 F8640
G1 X140.117 Y105.569 E-.2639
;WIPE_END
G1 E-.5361 F2100
G1 Z55.4 F720
G1 X108.654 Y104.573 F10800
G1 Z55 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F900
G1 X108.654 Y105.423 E.02877
G1 X107.423 Y105.423 E.04169
G1 X107.423 Y106.925 E.05084
G1 X103.575 Y106.925 E.13024
G1 X103.575 Y103.075 E.13032
G1 X107.423 Y103.075 E.13024
G1 X107.423 Y104.573 E.05071
G1 X108.594 Y104.573 E.03966
M204 S1000
G1 X109.037 Y104.689 F10800
G1 X107.773 Y104.223
M204 S800
G1 F900
G1 X109.351 Y104.223 E.05342
G1 X109.351 Y105.773 E.05247
G1 X107.773 Y105.773 E.05342
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.351 Y104.223 E-.36465
G1 X109.351 Y105.773 E-.3579
G1 X109.189 Y105.773 E-.03745
;WIPE_END
G1 E-.04 F2100
G1 Z55.4 F720
G1 X109.003 Y104.427 F10800
G1 Z55 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.332222
G1 F900
G1 X109.003 Y105.569 E.02749
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:55.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;55.2








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X109.003 Y104.427 E-.2639
;WIPE_END
G1 E-.5361 F2100
G1 Z55.4 F720
;AFTER_LAYER_CHANGE
;55.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X140.276 Y104.573 F10800
G1 Z55.2 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F900
G1 X142.573 Y104.573 E.07772
G1 X142.573 Y103.075 E.05071
G1 X146.425 Y103.075 E.1304
G1 X146.425 Y106.925 E.13032
G1 X142.573 Y106.925 E.1304
G1 X142.573 Y105.423 E.05084
G1 X140.276 Y105.423 E.07772
G1 X140.276 Y104.633 E.02674
M204 S1000
G1 X140.119 Y104.205 F10800
;WIPE_START
G1 F8640
G1 X142.573 Y104.573 E-.53038
G1 X142.573 Y103.579 E-.22962
;WIPE_END
G1 E-.04 F2100
G1 Z55.6 F720
G1 X142.223 Y105.773 F10800
G1 Z55.2 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X139.481 Y105.773 E.0928
G1 X139.481 Y104.223 E.05247
G1 X142.223 Y104.223 E.0928
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.481 Y105.773 E-.63318
G1 X139.481 Y105.224 E-.12682
;WIPE_END
G1 E-.04 F2100
G1 Z55.6 F720
G1 X139.879 Y105.569 F10800
G1 Z55.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.431184
G1 F900
G1 X139.879 Y104.427 E.0369
;WIPE_START
G1 F8640
G1 X139.879 Y105.569 E-.2639
;WIPE_END
G1 E-.5361 F2100
G1 Z55.6 F720
G1 X108.845 Y104.573 F10800
G1 Z55.2 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F900
G1 X108.845 Y105.423 E.02877
G1 X107.423 Y105.423 E.04814
G1 X107.423 Y106.925 E.05084
G1 X103.575 Y106.925 E.13024
G1 X103.575 Y103.075 E.13032
G1 X107.423 Y103.075 E.13024
G1 X107.423 Y104.573 E.05071
G1 X108.785 Y104.573 E.04611
M204 S1000
G1 X109.23 Y104.68 F10800
;WIPE_START
G1 F8640
G1 X108.845 Y105.423 E-.19676
G1 X107.423 Y105.423 E-.32841
G1 X107.423 Y106.44 E-.23484
;WIPE_END
G1 E-.04 F2100
G1 Z55.6 F720
G1 X107.773 Y104.223 F10800
G1 Z55.2 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X109.599 Y104.223 E.06183
G1 X109.599 Y105.773 E.05247
G1 X107.773 Y105.773 E.06183
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
;WIPE_START
G1 F8640
G1 X109.599 Y104.223 E-.42201
G1 X109.599 Y105.687 E-.33799
;WIPE_END
G1 E-.04 F2100
G1 Z55.6 F720
G1 X109.222 Y104.427 F10800
G1 Z55.2 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.390258
G1 F900
G1 X109.222 Y105.569 E.03301
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:55.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;55.4








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X109.222 Y104.427 E-.2639
;WIPE_END
G1 E-.5361 F2100
G1 Z55.6 F720
;AFTER_LAYER_CHANGE
;55.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X140.038 Y104.573 F10800
G1 Z55.4 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F900
G1 X142.573 Y104.573 E.08579
G1 X142.573 Y103.075 E.05071
G1 X146.425 Y103.075 E.1304
G1 X146.425 Y106.925 E.13032
G1 X142.573 Y106.925 E.1304
G1 X142.573 Y105.423 E.05084
G1 X140.038 Y105.423 E.08579
G1 X140.038 Y104.633 E.02674
M204 S1000
G1 X139.877 Y104.207 F10800
;WIPE_START
G1 F8640
G1 X142.573 Y104.573 E-.58536
G1 X142.573 Y103.817 E-.17464
;WIPE_END
G1 E-.04 F2100
G1 Z55.8 F720
G1 X142.223 Y105.773 F10800
G1 Z55.4 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X139.243 Y105.773 E.10087
G1 X139.243 Y104.223 E.05247
G1 X142.223 Y104.223 E.10087
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.243 Y105.773 E-.68821
G1 X139.243 Y105.462 E-.07179
;WIPE_END
G1 E-.04 F2100
G1 Z55.8 F720
G1 X139.64 Y105.569 F10800
G1 Z55.4 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.431376
G1 F900
G1 X139.64 Y104.427 E.03692
;WIPE_START
G1 F8640
G1 X139.64 Y105.569 E-.2639
;WIPE_END
G1 E-.5361 F2100
G1 Z55.8 F720
G1 X109.472 Y105.016 F10800
G1 Z55.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X109.472 Y105.366 E.01185
G1 X109.458 Y105.366 E.00048
G1 X109.458 Y104.63 E.02491
G1 X109.472 Y104.63 E.00048
G1 X109.472 Y104.956 E.01103
M204 S1000
G1 X109.051 Y104.573 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.051 Y105.423 E.02877
G1 X107.423 Y105.423 E.0551
G1 X107.423 Y106.925 E.05084
G1 X103.575 Y106.925 E.13024
G1 X103.575 Y103.075 E.13032
G1 X107.423 Y103.075 E.13024
G1 X107.423 Y104.573 E.05071
G1 X108.991 Y104.573 E.05307
M204 S1000
G1 X109.438 Y104.671 F10800
;WIPE_START
G1 F8640
G1 X109.051 Y105.423 E-.19676
G1 X107.423 Y105.423 E-.37588
G1 X107.423 Y106.234 E-.18736
;WIPE_END
G1 E-.04 F2100
G1 Z55.8 F720
G1 X107.773 Y104.223 F10800
G1 Z55.4 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X109.879 Y104.223 E.07129
G1 X109.879 Y105.773 E.05247
G1 X107.773 Y105.773 E.07129
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:55.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;55.6








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X109.879 Y104.223 E-.48654
G1 X109.879 Y105.407 E-.27346
;WIPE_END
G1 E-.04 F2100
G1 Z55.8 F720
;AFTER_LAYER_CHANGE
;55.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X139.8 Y105.423 F10800
G1 Z55.6 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X139.8 Y104.573 E.02877
G1 X142.573 Y104.573 E.09385
G1 X142.573 Y103.075 E.05071
G1 X146.425 Y103.075 E.1304
G1 X146.425 Y106.925 E.13032
G1 X142.573 Y106.925 E.1304
G1 X142.573 Y105.423 E.05084
G1 X139.86 Y105.423 E.09182
M204 S1000
G1 X139.406 Y105.357 F10800
;WIPE_START
G1 F8640
G1 X139.8 Y104.573 E-.19676
G1 X142.239 Y104.573 E-.56324
;WIPE_END
G1 E-.04 F2100
G1 Z56 F720
G1 X142.223 Y105.773 F10800
G1 Z55.6 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X139.004 Y105.773 E.10894
G1 X139.004 Y104.223 E.05247
G1 X142.223 Y104.223 E.10894
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
;WIPE_START
G1 F8640
G1 X139.004 Y105.773 E-.74325
G1 X139.004 Y105.7 E-.01675
;WIPE_END
G1 E-.04 F2100
G1 Z56 F720
G1 X139.402 Y105.569 F10800
G1 Z55.6 F720
G1 E.8 F2100
;TYPE:Gap fill
;WIDTH:0.43157
G1 F900
G1 X139.402 Y104.427 E.03694
;WIPE_START
G1 F8640
G1 X139.402 Y105.569 E-.2639
;WIPE_END
G1 E-.5361 F2100
G1 Z56 F720
G1 X109.788 Y104.922 F10800
G1 Z55.6 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X109.788 Y105.366 E.01501
G1 X109.68 Y105.366 E.00365
G1 X109.68 Y104.63 E.02491
G1 X109.788 Y104.63 E.00365
G1 X109.788 Y104.862 E.00786
M204 S1000
G1 X109.273 Y104.573 F10800
M204 S800
;TYPE:External perimeter
G1 F900
G1 X109.273 Y105.423 E.02877
G1 X107.423 Y105.423 E.06264
G1 X107.423 Y106.925 E.05084
G1 X103.575 Y106.925 E.13024
G1 X103.575 Y103.075 E.13032
M73 P97 R1
M73 Q97 S1
G1 X107.423 Y103.075 E.13024
G1 X107.423 Y104.573 E.05071
G1 X109.213 Y104.573 E.06061
M204 S1000
G1 X109.663 Y104.663 F10800
;WIPE_START
G1 F8640
G1 X109.273 Y105.423 E-.19676
G1 X107.423 Y105.423 E-.42731
G1 X107.423 Y106.012 E-.13594
;WIPE_END
G1 E-.04 F2100
G1 Z56 F720
G1 X107.773 Y104.223 F10800
G1 Z55.6 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X110.195 Y104.223 E.082
G1 X110.195 Y105.773 E.05247
G1 X107.773 Y105.773 E.082
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:55.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;55.8








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X110.195 Y104.223 E-.55952
G1 X110.195 Y105.091 E-.20048
;WIPE_END
G1 E-.04 F2100
G1 Z56 F720
;AFTER_LAYER_CHANGE
;55.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X141.423 Y105.366 F10800
G1 Z55.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
G1 F900
G1 X139.173 Y105.366 E.07615
G1 X139.173 Y104.63 E.02491
G1 X142.368 Y104.63 E.10814
G1 X142.368 Y105.366 E.02491
G1 X141.483 Y105.366 E.02997
M204 S1000
;WIPE_START
G1 F8640
G1 X139.173 Y105.366 E-.5333
G1 X139.173 Y104.63 E-.16991
G1 X139.419 Y104.63 E-.05679
;WIPE_END
G1 E-.04 F2100
G1 Z56.2 F720
G1 X142.775 Y103.273 F10800
G1 Z55.8 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
G1 F900
G1 X146.223 Y103.273 E.1167
G1 X146.223 Y106.723 E.11678
G1 X142.775 Y106.723 E.1167
G1 X142.775 Y103.333 E.11475
M204 S1000
G1 X142.672 Y102.887 F10800
;WIPE_START
G1 F8640
G1 X146.066 Y103.276 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z56.2 F720
G1 X142.223 Y105.773 F10800
G1 Z55.8 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X138.766 Y105.773 E.11701
G1 X138.766 Y104.223 E.05247
G1 X142.223 Y104.223 E.11701
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.833 E.04881
M204 S1000
G1 X142.061 Y105.407 F10800
G1 X142.499 Y105.569
;TYPE:Gap fill
;WIDTH:0.188216
G1 F900
G1 X142.499 Y106.927 E.0164
;WIDTH:0.21293
G1
G1 X142.511 Y106.986 E.00086
;WIDTH:0.212932
G1
G1 X142.571 Y106.999 E.00087
;WIDTH:0.18785
G1
G1 X146.426 Y106.999 E.04645
;WIDTH:0.212924
G1
G1 X146.486 Y106.986 E.00087
;WIDTH:0.212924
G1
G1 X146.499 Y106.927 E.00086
;WIDTH:0.188204
G1
G1 X146.499 Y103.069 E.0466
;WIDTH:0.210618
G1
G1 X146.488 Y103.012 E.00081
;WIDTH:0.210619
G1
G1 X146.426 Y102.999 E.00088
;WIDTH:0.183834
G1
G1 X142.571 Y102.999 E.04517
;WIDTH:0.210626
G1
G1 X142.51 Y103.012 E.00088
;WIDTH:0.210625
G1
G1 X142.499 Y103.069 E.00081
;WIDTH:0.188216
G1
G1 X142.499 Y104.427 E.0164
G1 X142.164 Y104.998 F10800
;WIDTH:0.371688
G1 F900
G1 X139.377 Y104.998 E.07621
;WIPE_START
G1 F8640
G1 X142.164 Y104.998 E-.64373
;WIPE_END
G1 E-.15627 F2100
G1 Z56.2 F720
G1 X108.573 Y104.63 F10800
G1 Z55.8 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F900
G1 X110.161 Y104.63 E.05378
G1 X110.161 Y105.366 E.02491
G1 X107.632 Y105.366 E.08561
G1 X107.632 Y104.63 E.02491
G1 X108.513 Y104.63 E.02981
M204 S1000
;WIPE_START
G1 F8640
G1 X110.161 Y104.63 E-.38071
G1 X110.161 Y105.366 E-.16991
G1 X109.255 Y105.366 E-.20939
;WIPE_END
G1 E-.04 F2100
G1 Z56.2 F720
G1 X107.225 Y103.273 F10800
G1 Z55.8 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
G1 F900
G1 X107.225 Y106.723 E.11678
G1 X103.773 Y106.723 E.11686
G1 X103.773 Y103.273 E.11678
G1 X107.165 Y103.273 E.11483
M204 S1000
G1 X107.611 Y103.17 F10800
;WIPE_START
G1 F8640
G1 X107.222 Y106.564 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z56.2 F720
G1 X107.773 Y104.223 F10800
G1 Z55.8 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X110.568 Y104.223 E.09464
G1 X110.568 Y105.773 E.05247
G1 X107.773 Y105.773 E.09464
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
G1 X107.499 Y104.427
;TYPE:Gap fill
;WIDTH:0.183484
G1 F900
G1 X107.499 Y103.069 E.01586
;WIDTH:0.207806
G1
G1 X107.487 Y103.011 E.00082
;WIDTH:0.207807
G1
G1 X107.429 Y102.999 E.00081
;WIDTH:0.183834
G1
G1 X103.569 Y102.999 E.04522
;WIDTH:0.2078
G1
G1 X103.511 Y103.011 E.00081
;WIDTH:0.207801
G1
G1 X103.499 Y103.069 E.00082
;WIDTH:0.183474
G1
G1 X103.499 Y106.927 E.04508
;WIDTH:0.2102
G1
G1 X103.512 Y106.988 E.00087
;WIDTH:0.210201
G1
G1 X103.569 Y106.999 E.00081
;WIDTH:0.18785
G1
G1 X107.429 Y106.999 E.04651
;WIDTH:0.210206
G1
G1 X107.485 Y106.988 E.00081
;WIDTH:0.210206
G1
G1 X107.499 Y106.927 E.00087
;WIDTH:0.183484
G1
G1 X107.499 Y105.569 E.01586
G1 X107.836 Y104.998 F10800
;WIDTH:0.371688
G1 F900
G1 X109.958 Y104.998 E.05802
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:56
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;56








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X107.836 Y104.998 E-.49003
;WIPE_END
G1 E-.30997 F2100
G1 Z56.2 F720
;AFTER_LAYER_CHANGE
;56
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.956 Y104.63 F10800
G1 Z56 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F1006
G1 X110.993 Y104.63 E.10283
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X138.341 Y104.63 E.87939
;TYPE:Perimeter
;WIDTH:0.45
G1 F1006
G1 X142.368 Y104.63 E.13631
G1 X142.368 Y105.366 E.02491
G1 X138.341 Y105.366 E.13631
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X110.993 Y105.366 E.87939
;TYPE:Perimeter
;WIDTH:0.45
G1 F1006
G1 X107.632 Y105.366 E.11378
G1 X107.632 Y104.63 E.02491
G1 X107.896 Y104.63 E.00892
M204 S1000
;WIPE_START
G1 F8640
G1 X110.993 Y104.63 E-.7153
;WIPE_END
G1 E-.0847 F2100
G1 Z56.4 F720
G1 X107.225 Y103.273 F10800
G1 Z56 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
G1 F1006
G1 X107.225 Y106.723 E.11678
G1 X103.773 Y106.723 E.11686
G1 X103.773 Y103.273 E.11678
G1 X107.165 Y103.273 E.11483
M204 S1000
G1 X107.611 Y103.17 F10800
;WIPE_START
G1 F8640
G1 X107.222 Y106.564 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z56.4 F720
G1 X142.775 Y103.273 F10800
G1 Z56 F720
G1 E.8 F2100
M204 S800
G1 F1006
G1 X146.223 Y103.273 E.1167
G1 X146.223 Y106.723 E.11678
G1 X142.775 Y106.723 E.1167
G1 X142.775 Y103.333 E.11475
M204 S1000
G1 X142.672 Y102.887 F10800
;WIPE_START
G1 F8640
G1 X146.066 Y103.276 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z56.4 F720
G1 X107.773 Y105.773 F10800
G1 Z56 F720
G1 E.8 F2100
M204 S800
G1 F1006
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.223 E.05071
G1 X110.993 Y104.223 E.10902
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X138.341 Y104.223 E.87939
;TYPE:External perimeter
;WIDTH:0.45
G1 F1006
G1 X142.223 Y104.223 E.13139
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X138.341 Y105.773 E.13139
;TYPE:Overhang perimeter
;WIDTH:0.429646
G1 F1500
G1 X110.993 Y105.773 E.87939
;TYPE:External perimeter
;WIDTH:0.45
G1 F1006
G1 X107.833 Y105.773 E.10699
M204 S1000
G1 X107.499 Y105.569 F10800
;TYPE:Gap fill
;WIDTH:0.183484
G1 F1006
G1 X107.499 Y106.927 E.01586
;WIDTH:0.210206
G1
G1 X107.485 Y106.988 E.00087
;WIDTH:0.210206
G1
G1 X107.429 Y106.999 E.00081
;WIDTH:0.18785
G1
G1 X103.569 Y106.999 E.04651
;WIDTH:0.210201
G1
M73 P97 R0
G1 X103.512 Y106.988 E.00081
;WIDTH:0.2102
G1
G1 X103.499 Y106.927 E.00087
;WIDTH:0.183474
G1
G1 X103.499 Y103.069 E.04508
;WIDTH:0.207801
G1
G1 X103.511 Y103.011 E.00082
;WIDTH:0.2078
G1
G1 X103.569 Y102.999 E.00081
;WIDTH:0.183834
G1
G1 X107.429 Y102.999 E.04522
;WIDTH:0.207807
G1
G1 X107.487 Y103.011 E.00081
;WIDTH:0.207806
G1
G1 X107.499 Y103.069 E.00082
;WIDTH:0.183484
G1
G1 X107.499 Y104.427 E.01586
G1 X107.836 Y104.998 F10800
;WIDTH:0.371688
G1 F1006
G1 X142.164 Y104.998 E.93845
G1 X142.499 Y104.427 F10800
;WIDTH:0.188216
M73 P98 R0
M73 Q98 S0
G1 F1006
G1 X142.499 Y103.069 E.0164
;WIDTH:0.210625
G1
G1 X142.51 Y103.012 E.00081
;WIDTH:0.210626
G1
G1 X142.571 Y102.999 E.00088
;WIDTH:0.183834
G1
G1 X146.426 Y102.999 E.04517
;WIDTH:0.210619
G1
G1 X146.488 Y103.012 E.00088
;WIDTH:0.210618
G1
G1 X146.499 Y103.069 E.00081
;WIDTH:0.188204
G1
G1 X146.499 Y106.927 E.0466
;WIDTH:0.212924
G1
G1 X146.486 Y106.986 E.00086
;WIDTH:0.212924
G1
G1 X146.426 Y106.999 E.00087
;WIDTH:0.18785
G1
G1 X142.571 Y106.999 E.04645
;WIDTH:0.212932
G1
G1 X142.511 Y106.986 E.00087
;WIDTH:0.21293
G1
G1 X142.499 Y106.927 E.00086
;WIDTH:0.188216
G1
G1 X142.499 Y105.569 E.0164
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:56.2
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;56.2








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X142.499 Y106.927 E-.31335
;WIPE_END
G1 E-.48665 F2100
G1 Z56.4 F720
;AFTER_LAYER_CHANGE
;56.2
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.973 Y104.63 F10800
G1 Z56.2 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F1155
G1 X142.368 Y104.63 E1.13039
G1 X142.368 Y105.366 E.02491
G1 X107.632 Y105.366 E1.17577
G1 X107.632 Y104.63 E.02491
G1 X108.913 Y104.63 E.04335
M204 S1000
;WIPE_START
G1 F8640
G1 X112.204 Y104.63 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z56.6 F720
G1 X142.775 Y103.273 F10800
G1 Z56.2 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
G1 F1155
G1 X146.223 Y103.273 E.1167
G1 X146.223 Y106.723 E.11678
G1 X142.775 Y106.723 E.1167
G1 X142.775 Y103.333 E.11475
M204 S1000
G1 X142.672 Y102.887 F10800
;WIPE_START
G1 F8640
G1 X146.066 Y103.276 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z56.6 F720
G1 X107.225 Y103.333 F10800
G1 Z56.2 F720
G1 E.8 F2100
M204 S800
G1 F1155
G1 X107.225 Y106.723 E.11475
G1 X103.773 Y106.723 E.11686
G1 X103.773 Y103.273 E.11678
G1 X107.225 Y103.273 E.11686
M204 S1000
G1 X107.612 Y103.231 F10800
;WIPE_START
G1 F8640
G1 X107.225 Y106.564 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z56.6 F720
G1 X107.773 Y104.223 F10800
G1 Z56.2 F720
G1 E.8 F2100
M204 S800
G1 F1155
G1 X142.223 Y104.223 E1.16609
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X107.773 Y105.773 E1.16609
G1 X107.773 Y107.275 E.05084
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
G1 X107.499 Y104.427
;TYPE:Gap fill
;WIDTH:0.183484
G1 F1155
G1 X107.499 Y103.069 E.01586
;WIDTH:0.207806
G1
G1 X107.487 Y103.011 E.00082
;WIDTH:0.207807
G1
G1 X107.429 Y102.999 E.00081
;WIDTH:0.183834
G1
G1 X103.569 Y102.999 E.04522
;WIDTH:0.2078
G1
G1 X103.511 Y103.011 E.00081
;WIDTH:0.207801
G1
G1 X103.499 Y103.069 E.00082
;WIDTH:0.183474
G1
G1 X103.499 Y106.927 E.04508
;WIDTH:0.2102
G1
G1 X103.512 Y106.988 E.00087
;WIDTH:0.210201
G1
G1 X103.569 Y106.999 E.00081
;WIDTH:0.18785
G1
G1 X107.429 Y106.999 E.04651
;WIDTH:0.210206
G1
G1 X107.485 Y106.988 E.00081
;WIDTH:0.210206
G1
G1 X107.499 Y106.927 E.00087
;WIDTH:0.183484
G1
G1 X107.499 Y105.569 E.01586
G1 X107.836 Y104.998 F10800
;WIDTH:0.371688
G1 F1155
G1 X142.164 Y104.998 E.93845
G1 X142.499 Y104.427 F10800
;WIDTH:0.188216
G1 F1155
G1 X142.499 Y103.069 E.0164
;WIDTH:0.210625
G1
G1 X142.51 Y103.012 E.00081
;WIDTH:0.210626
G1
G1 X142.571 Y102.999 E.00088
;WIDTH:0.183834
G1
G1 X146.426 Y102.999 E.04517
;WIDTH:0.210619
G1
G1 X146.488 Y103.012 E.00088
;WIDTH:0.210618
G1
G1 X146.499 Y103.069 E.00081
;WIDTH:0.188204
G1
G1 X146.499 Y106.927 E.0466
;WIDTH:0.212924
G1
G1 X146.486 Y106.986 E.00086
;WIDTH:0.212924
G1
G1 X146.426 Y106.999 E.00087
;WIDTH:0.18785
G1
G1 X142.571 Y106.999 E.04645
;WIDTH:0.212932
G1
G1 X142.511 Y106.986 E.00087
;WIDTH:0.21293
G1
G1 X142.499 Y106.927 E.00086
;WIDTH:0.188216
G1
G1 X142.499 Y105.569 E.0164
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:56.4
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;56.4








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X142.499 Y106.927 E-.31335
;WIPE_END
G1 E-.48665 F2100
G1 Z56.6 F720
;AFTER_LAYER_CHANGE
;56.4
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X108.973 Y104.63 F10800
G1 Z56.4 F720
G1 E.8 F2100
M204 S800
;TYPE:Perimeter
;WIDTH:0.45
G1 F1155
G1 X142.368 Y104.63 E1.13039
G1 X142.368 Y105.366 E.02491
G1 X107.632 Y105.366 E1.17577
G1 X107.632 Y104.63 E.02491
G1 X108.913 Y104.63 E.04335
M204 S1000
;WIPE_START
G1 F8640
G1 X112.204 Y104.63 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z56.8 F720
G1 X142.775 Y103.273 F10800
G1 Z56.4 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
G1 F1155
G1 X146.223 Y103.273 E.1167
G1 X146.223 Y106.723 E.11678
G1 X142.775 Y106.723 E.1167
G1 X142.775 Y103.333 E.11475
M204 S1000
G1 X142.672 Y102.887 F10800
;WIPE_START
G1 F8640
G1 X146.066 Y103.276 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z56.8 F720
G1 X107.225 Y103.333 F10800
G1 Z56.4 F720
G1 E.8 F2100
M204 S800
G1 F1155
G1 X107.225 Y106.723 E.11475
G1 X103.773 Y106.723 E.11686
G1 X103.773 Y103.273 E.11678
G1 X107.225 Y103.273 E.11686
M204 S1000
G1 X107.612 Y103.231 F10800
;WIPE_START
G1 F8640
G1 X107.225 Y106.564 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z56.8 F720
G1 X107.773 Y104.223 F10800
G1 Z56.4 F720
G1 E.8 F2100
M204 S800
G1 F1155
G1 X142.223 Y104.223 E1.16609
G1 X142.223 Y102.725 E.05071
G1 X146.775 Y102.725 E.15409
G1 X146.775 Y107.275 E.15401
G1 X142.223 Y107.275 E.15409
G1 X142.223 Y105.773 E.05084
G1 X107.773 Y105.773 E1.16609
G1 X107.773 Y107.275 E.05084
M73 P99 R0
M73 Q99 S0
G1 X103.225 Y107.275 E.15393
G1 X103.225 Y102.725 E.15401
G1 X107.773 Y102.725 E.15393
G1 X107.773 Y104.163 E.04867
M204 S1000
G1 X107.935 Y104.589 F10800
G1 X107.499 Y104.427
;TYPE:Gap fill
;WIDTH:0.183484
G1 F1155
G1 X107.499 Y103.069 E.01586
;WIDTH:0.207806
G1
G1 X107.487 Y103.011 E.00082
;WIDTH:0.207807
G1
G1 X107.429 Y102.999 E.00081
;WIDTH:0.183834
G1
G1 X103.569 Y102.999 E.04522
;WIDTH:0.2078
G1
G1 X103.511 Y103.011 E.00081
;WIDTH:0.207801
G1
G1 X103.499 Y103.069 E.00082
;WIDTH:0.183474
G1
G1 X103.499 Y106.927 E.04508
;WIDTH:0.2102
G1
G1 X103.512 Y106.988 E.00087
;WIDTH:0.210201
G1
G1 X103.569 Y106.999 E.00081
;WIDTH:0.18785
G1
G1 X107.429 Y106.999 E.04651
;WIDTH:0.210206
G1
G1 X107.485 Y106.988 E.00081
;WIDTH:0.210206
G1
G1 X107.499 Y106.927 E.00087
;WIDTH:0.183484
G1
G1 X107.499 Y105.569 E.01586
G1 X107.836 Y104.998 F10800
;WIDTH:0.371688
G1 F1155
G1 X142.164 Y104.998 E.93845
G1 X142.499 Y104.427 F10800
;WIDTH:0.188216
G1 F1155
G1 X142.499 Y103.069 E.0164
;WIDTH:0.210625
G1
G1 X142.51 Y103.012 E.00081
;WIDTH:0.210626
G1
G1 X142.571 Y102.999 E.00088
;WIDTH:0.183834
G1
G1 X146.426 Y102.999 E.04517
;WIDTH:0.210619
G1
G1 X146.488 Y103.012 E.00088
;WIDTH:0.210618
G1
G1 X146.499 Y103.069 E.00081
;WIDTH:0.188204
G1
G1 X146.499 Y106.927 E.0466
;WIDTH:0.212924
G1
G1 X146.486 Y106.986 E.00086
;WIDTH:0.212924
G1
G1 X146.426 Y106.999 E.00087
;WIDTH:0.18785
G1
G1 X142.571 Y106.999 E.04645
;WIDTH:0.212932
G1
G1 X142.511 Y106.986 E.00087
;WIDTH:0.21293
G1
G1 X142.499 Y106.927 E.00086
;WIDTH:0.188216
G1
G1 X142.499 Y105.569 E.0164
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:56.6
;HEIGHT:0.199997
;BEFORE_LAYER_CHANGE
G92 E0.0
;56.6








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X142.499 Y106.927 E-.31335
;WIPE_END
G1 E-.48665 F2100
G1 Z56.8 F720
;AFTER_LAYER_CHANGE
;56.6
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.225 Y106.723 F10800
G1 Z56.6 F720
G1 E.8 F2100
M204 S800
;TYPE:External perimeter
;WIDTH:0.45
G1 F900
G1 X103.773 Y106.723 E.11686
G1 X103.773 Y103.273 E.11678
G1 X107.225 Y103.273 E.11686
G1 X107.225 Y106.663 E.11475
M204 S1000
G1 X107.329 Y107.109 F10800
G1 X107.575 Y107.073
M204 S800
G1 F900
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.575 Y102.923 E.14055
G1 X107.575 Y107.013 E.13844
M204 S1000
G1 X107.189 Y106.97 F10800
;WIPE_START
G1 F8640
G1 X104.284 Y107.061 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z57 F720
G1 X142.775 Y106.723 F10800
G1 Z56.6 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X142.775 Y103.273 E.11678
G1 X146.223 Y103.273 E.1167
G1 X146.223 Y106.723 E.11678
G1 X142.835 Y106.723 E.11467
M204 S1000
G1 X142.389 Y106.827 F10800
G1 X142.425 Y107.073
M204 S800
G1 F900
G1 X142.425 Y102.923 E.14047
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.485 Y107.073 E.13836
M204 S1000
G1 X142.529 Y106.687 F10800
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:56.8
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;56.8








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X142.437 Y103.782 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z57 F720
;AFTER_LAYER_CHANGE
;56.8
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.225 Y103.273 F10800
G1 Z56.8 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X107.225 Y106.723 E.11678
G1 X103.773 Y106.723 E.11686
G1 X103.773 Y103.273 E.11678
G1 X107.165 Y103.273 E.11483
M204 S1000
G1 X107.611 Y103.17 F10800
G1 X107.575 Y102.923
M204 S800
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z57.2 F720
G1 X142.775 Y103.273 F10800
G1 Z56.8 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X146.223 Y103.273 E.1167
G1 X146.223 Y106.723 E.11678
G1 X142.775 Y106.723 E.1167
G1 X142.775 Y103.333 E.11475
M204 S1000
G1 X142.672 Y102.887 F10800
G1 X142.425 Y102.923
M204 S800
G1 F900
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.425 Y107.073 E.14039
G1 X142.425 Y102.983 E.13844
M204 S1000
G1 X142.811 Y103.027 F10800
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;LAYER_CHANGE
;Z:57
;HEIGHT:0.200001
;BEFORE_LAYER_CHANGE
G92 E0.0
;57








 M104 S190 M109 S190 
;WIPE_START
G1 F8640
G1 X145.716 Y102.935 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z57.2 F720
;AFTER_LAYER_CHANGE
;57
; printing object Fast Temp Tower PLA v4 id:0 copy 0
G1 X107.225 Y103.273 F10800
G1 Z57 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X107.225 Y106.723 E.11678
G1 X103.773 Y106.723 E.11686
G1 X103.773 Y103.273 E.11678
G1 X107.165 Y103.273 E.11483
M204 S1000
G1 X107.611 Y103.17 F10800
G1 X107.575 Y102.923
M204 S800
G1 F900
G1 X107.575 Y107.073 E.14047
G1 X103.423 Y107.073 E.14055
G1 X103.423 Y102.923 E.14047
G1 X107.515 Y102.923 E.13852
M204 S1000
G1 X107.471 Y103.309 F10800
;WIPE_START
G1 F8640
G1 X107.563 Y106.214 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z57.4 F720
G1 X142.775 Y103.273 F10800
G1 Z57 F720
G1 E.8 F2100
M204 S800
G1 F900
G1 X146.223 Y103.273 E.1167
G1 X146.223 Y106.723 E.11678
G1 X142.775 Y106.723 E.1167
G1 X142.775 Y103.333 E.11475
M204 S1000
G1 X142.672 Y102.887 F10800
G1 X142.425 Y102.923
M204 S800
G1 F900
G1 X146.573 Y102.923 E.14039
G1 X146.573 Y107.073 E.14047
G1 X142.425 Y107.073 E.14039
G1 X142.425 Y102.983 E.13844
M204 S1000
G1 X142.811 Y103.027 F10800
; stop printing object Fast Temp Tower PLA v4 id:0 copy 0
;WIPE_START
G1 F8640;_WIPE
G1 X145.716 Y102.935 E-.76
;WIPE_END
G1 E-.04 F2100
G1 Z57.4 F720
M107
;TYPE:Custom
; Filament-specific end gcode
G4 ; wait
M221 S100 ; reset flow
M900 K0 ; reset LA

M104 S0 ; turn off temperature
M140 S0 ; turn off heatbed
M107 ; turn off fan
G1 Z87 ; Move print head up
G1 X0 Y200 F3000 ; home X axis
M84 ; disable motors
M73 P100 R0
M73 Q100 S0
; filament used [mm] = 1255.21
; filament used [cm3] = 3.02
; filament used [g] = 3.74
; filament cost = 0.11
; total filament used [g] = 3.74
; total filament cost = 0.11
; estimated printing time (normal mode) = 47m 54s
; estimated printing time (silent mode) = 48m 41s

; prusaslicer_config = begin
; avoid_crossing_perimeters = 0
; avoid_crossing_perimeters_max_detour = 0
; bed_custom_model = 
; bed_custom_texture = 
; bed_shape = 0x0,250x0,250x210,0x210
; bed_temperature = 60
; before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n{if layer_z>=0.00 && layer_z<7.60} M104 S230 M109 S230 {endif}\n{if layer_z>=7.60 && layer_z<13.80} M104 S225 M109 S225 {endif}\n{if layer_z>=13.80 && layer_z<20.00} M104 S220 M109 S220 {endif}\n{if layer_z>=20.00 && layer_z<26.20} M104 S215 M109 S215 {endif}\n{if layer_z>=26.20 && layer_z<32.40} M104 S210 M109 S210 {endif}\n{if layer_z>=32.40 && layer_z<38.60} M104 S205 M109 S205 {endif}\n{if layer_z>=38.60 && layer_z<44.80} M104 S200 M109 S200 {endif}\n{if layer_z>=44.80 && layer_z<51.00} M104 S195 M109 S195 {endif}\n{if layer_z>=51.00} M104 S190 M109 S190 {endif}
; between_objects_gcode = 
; bottom_fill_pattern = monotonic
; bottom_solid_layers = 4
; bottom_solid_min_thickness = 0.5
; bridge_acceleration = 1000
; bridge_angle = 0
; bridge_fan_speed = 100
; bridge_flow_ratio = 0.95
; bridge_speed = 25
; brim_separation = 0.1
; brim_type = outer_only
; brim_width = 0
; clip_multipart_objects = 1
; color_change_gcode = M600\nG1 E0.4 F1500 ; prime after color change
; compatible_printers_condition_cummulative = "printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4";"nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)"
; complete_objects = 0
; cooling = 1
; cooling_tube_length = 5
; cooling_tube_retraction = 91.5
; default_acceleration = 1000
; default_filament_profile = "Prusament PLA"
; default_print_profile = 0.15mm QUALITY @MK3
; deretract_speed = 0
; disable_fan_first_layers = 1
; dont_support_bridges = 0
; draft_shield = disabled
; duplicate_distance = 6
; elefant_foot_compensation = 0.2
; end_filament_gcode = "; Filament-specific end gcode"
; end_gcode = G4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
; ensure_vertical_shell_thickness = 1
; external_perimeter_extrusion_width = 0.45
; external_perimeter_speed = 35
; external_perimeters_first = 0
; extra_loading_move = -2
; extra_perimeters = 0
; extruder_clearance_height = 20
; extruder_clearance_radius = 45
; extruder_colour = ""
; extruder_offset = 0x0
; extrusion_axis = E
; extrusion_multiplier = 1
; extrusion_width = 0.45
; fan_always_on = 1
; fan_below_layer_time = 100
; filament_colour = #FF8000
; filament_cooling_final_speed = 3.4
; filament_cooling_initial_speed = 2.2
; filament_cooling_moves = 4
; filament_cost = 30.24
; filament_density = 1.24
; filament_diameter = 1.75
; filament_load_time = 0
; filament_loading_speed = 28
; filament_loading_speed_start = 3
; filament_max_volumetric_speed = 15
; filament_minimal_purge_on_wipe_tower = 15
; filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa"
; filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
; filament_settings_id = "Prusament PLA"
; filament_soluble = 0
; filament_spool_weight = 201
; filament_toolchange_delay = 0
; filament_type = PLA
; filament_unload_time = 0
; filament_unloading_speed = 90
; filament_unloading_speed_start = 100
; filament_vendor = Prusa Polymers
; fill_angle = 45
; fill_density = 20%
; fill_pattern = grid
; first_layer_acceleration = 800
; first_layer_acceleration_over_raft = 0
; first_layer_bed_temperature = 60
; first_layer_extrusion_width = 0.42
; first_layer_height = 0.2
; first_layer_speed = 20
; first_layer_speed_over_raft = 30
; first_layer_temperature = 215
; full_fan_speed_layer = 4
; fuzzy_skin = none
; fuzzy_skin_point_dist = 0.8
; fuzzy_skin_thickness = 0.3
; gap_fill_enabled = 1
; gap_fill_speed = 40
; gcode_comments = 0
; gcode_flavor = marlin
; gcode_label_objects = 1
; high_current_on_filament_swap = 0
; host_type = octoprint
; infill_acceleration = 1000
; infill_anchor = 2.5
; infill_anchor_max = 12
; infill_every_layers = 1
; infill_extruder = 1
; infill_extrusion_width = 0.45
; infill_first = 0
; infill_only_where_needed = 0
; infill_overlap = 25%
; infill_speed = 200
; interface_shells = 0
; ironing = 0
; ironing_flowrate = 15%
; ironing_spacing = 0.1
; ironing_speed = 15
; ironing_type = top
; layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
; layer_height = 0.2
; machine_limits_usage = emit_to_gcode
; machine_max_acceleration_e = 5000,5000
; machine_max_acceleration_extruding = 1250,1250
; machine_max_acceleration_retracting = 1250,1250
; machine_max_acceleration_travel = 1500,1250
; machine_max_acceleration_x = 1000,960
; machine_max_acceleration_y = 1000,960
; machine_max_acceleration_z = 200,200
; machine_max_feedrate_e = 120,120
; machine_max_feedrate_x = 200,100
; machine_max_feedrate_y = 200,100
; machine_max_feedrate_z = 12,12
; machine_max_jerk_e = 4.5,4.5
; machine_max_jerk_x = 8,8
; machine_max_jerk_y = 8,8
; machine_max_jerk_z = 0.4,0.4
; machine_min_extruding_rate = 0,0
; machine_min_travel_rate = 0,0
; max_fan_speed = 100
; max_layer_height = 0.25
; max_print_height = 210
; max_print_speed = 200
; max_volumetric_speed = 0
; min_fan_speed = 100
; min_layer_height = 0.07
; min_print_speed = 15
; min_skirt_length = 4
; mmu_segmented_region_max_width = 0
; notes = 
; nozzle_diameter = 0.4
; only_retract_when_crossing_perimeters = 0
; ooze_prevention = 0
; output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
; overhangs = 1
; parking_pos_retraction = 92
; pause_print_gcode = M601
; perimeter_acceleration = 800
; perimeter_extruder = 1
; perimeter_extrusion_width = 0.45
; perimeter_speed = 60
; perimeters = 2
; physical_printer_settings_id = 
; post_process = 
; print_settings_id = 0.20mm SPEED @MK3
; printer_model = MK3S
; printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
; printer_settings_id = Original Prusa i3 MK3S & MK3S+
; printer_technology = FFF
; printer_variant = 0.4
; printer_vendor = 
; raft_contact_distance = 0.2
; raft_expansion = 1.5
; raft_first_layer_density = 90%
; raft_first_layer_expansion = 3
; raft_layers = 0
; remaining_times = 1
; resolution = 0
; retract_before_travel = 1
; retract_before_wipe = 0%
; retract_layer_change = 1
; retract_length = 0.8
; retract_length_toolchange = 4
; retract_lift = 0.4
; retract_lift_above = 0
; retract_lift_below = 209
; retract_restart_extra = 0
; retract_restart_extra_toolchange = 0
; retract_speed = 35
; seam_position = nearest
; silent_mode = 1
; single_extruder_multi_material = 0
; single_extruder_multi_material_priming = 0
; skirt_distance = 2
; skirt_height = 3
; skirts = 1
; slice_closing_radius = 0.049
; slicing_mode = regular
; slowdown_below_layer_time = 15
; small_perimeter_speed = 25
; solid_infill_below_area = 0
; solid_infill_every_layers = 0
; solid_infill_extruder = 1
; solid_infill_extrusion_width = 0.45
; solid_infill_speed = 200
; spiral_vase = 0
; standby_temperature_delta = -5
; start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
; start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
; support_material = 0
; support_material_angle = 0
; support_material_auto = 1
; support_material_bottom_contact_distance = 0
; support_material_bottom_interface_layers = 0
; support_material_buildplate_only = 0
; support_material_closing_radius = 2
; support_material_contact_distance = 0.2
; support_material_enforce_layers = 0
; support_material_extruder = 0
; support_material_extrusion_width = 0.35
; support_material_interface_contact_loops = 0
; support_material_interface_extruder = 0
; support_material_interface_layers = 2
; support_material_interface_pattern = auto
; support_material_interface_spacing = 0.2
; support_material_interface_speed = 80%
; support_material_pattern = rectilinear
; support_material_spacing = 2
; support_material_speed = 50
; support_material_style = grid
; support_material_synchronize_layers = 0
; support_material_threshold = 50
; support_material_with_sheath = 0
; support_material_xy_spacing = 60%
; temperature = 215
; template_custom_gcode = 
; thick_bridges = 0
; thin_walls = 0
; threads = 12
; thumbnails = 
; toolchange_gcode = 
; top_fill_pattern = monotonic
; top_infill_extrusion_width = 0.4
; top_solid_infill_speed = 50
; top_solid_layers = 6
; top_solid_min_thickness = 0.7
; travel_speed = 180
; travel_speed_z = 12
; use_firmware_retraction = 0
; use_relative_e_distances = 1
; use_volumetric_e = 0
; variable_layer_height = 1
; wipe = 1
; wipe_into_infill = 0
; wipe_into_objects = 0
; wipe_tower = 1
; wipe_tower_bridging = 10
; wipe_tower_brim_width = 2
; wipe_tower_no_sparse_layers = 0
; wipe_tower_rotation_angle = 0
; wipe_tower_width = 60
; wipe_tower_x = 170
; wipe_tower_y = 125
; wiping_volumes_extruders = 70,70
; wiping_volumes_matrix = 0
; xy_size_compensation = 0
; z_offset = 0
; prusaslicer_config = end