; HEADER_BLOCK_START
; generated by OrcaSlicer 2.4.2 on 2026-10-26 at 13:17:15
; BambuStudio G-code viewer: configuration in CONFIG_BLOCK below
; total layer number: 34
; filament_density: 1.24
; filament_diameter: 1.75
; max_z_height: 6.80
; filament: 1
; HEADER_BLOCK_END

; external perimeters extrusion width = 0.45mm
; perimeters extrusion width = 0.45mm
; infill extrusion width = 0.45mm
; solid infill extrusion width = 0.45mm
; top infill extrusion width = 0.42mm
; first layer extrusion width = 0.50mm

; EXECUTABLE_BLOCK_START
M486 S0
M486 Aangle-test-v1.3-B.stl_id_0_copy_0
M486 S-1
M73 P0 R40
M201 X7000 Y7000 Z200 E2500
M203 X400 Y400 Z12 E100
M204 P4000 R1200 T5000 ; sets acceleration (P, T) and retract acceleration (R), mm/sec^2
M205 X8.00 Y8.00 Z2.00 E10.00 ; sets the jerk limits, mm/sec
M205 J0.010
;TYPE:Custom
M17 ; enable steppers
M862.3 P "XL" ; printer model check
M115 U6.0.1+14848
G90 ; use absolute coordinates
M83 ; extruder relative mode
; set print area
M555 X173 Y149.5 W14 H61
; inform about nozzle diameter
M862.1 P0.4
; set & wait for bed and extruder temp for MBL
M140 S35 ; set bed temp
M104 T0 S170 ; set extruder temp for bed leveling
M109 T0 R170 ; wait for temp
; home carriage, pick tool, home all
G28 XY
M84 E ; turn off E motor
G28 Z
M190 S35 ; wait for bed temp
G29 G ; absorb heat
; move to the nozzle cleanup area
G1 X205 Y142.5 Z5 F4800
M302 S160 ; lower cold extrusion limit to 160C
G1 E-2 F2400 ; retraction for nozzle cleanup
M73 P21 R31
; nozzle cleanup
M84 E ; turn off E motor
G29 P9 X173 Y142.5 W32 H7
G0 Z10 F480 ; move away in Z

M106 S100 ; cool off the nozzle
M107 ; stop cooling off the nozzle - turn off the fan
; MBL
M84 E ; turn off E motor
G29 P1 ; invalidate mbl & probe print area
G29 P1 X30 Y0 W50 H20 C ; probe near purge place
G29 P3.2 ; interpolate mbl probes
G29 P3.13 ; extrapolate mbl outside probe area
G29 A ; activate mbl
M104 S220 ; set extruder temp
G1 Z10 F720 ; move away in Z
M73 P75 R10
G0 X30 Y-8 F6000 ; move next to the sheet
; wait for extruder temp
M109 T0 S220
;
; purge
;
G92 E0 ; reset extruder position
G0 X30 Y-8 ; move close to the sheet's edge
G1 E2 F2400 ; deretraction after the initial one before nozzle cleaning
G0 E10 X40 Z0.2 F500 ; purge
G0 X70 E9 F800 ; purge
G0 X73 Z0.05 F8000 ; wipe, move close to the bed
G0 X76 Z0.2 F8000 ; wipe, move quickly away from the bed
G92 E0 ; reset extruder position
G90
G21
M83 ; use relative distances for extrusion
; filament start gcode
M900 K0.05 ; Filament gcode


M572 S0.036 ; Filament gcode


M142 S36 ; set heatbreak target temp
M106 S0
;LAYER_CHANGE
;Z:0.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;0.2
G1 E-.8 F2100
;AFTER_LAYER_CHANGE
;0.2
;_SET_FAN_SPEED_CHANGING_LAYER
M204 P500
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=0 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
M204 T5000
M486 S0
G1 Z.6 F24000
G1 X180.706 Y157.762
G1 Z.6
G1 Z.2
G1 E.8 F1800
;TYPE:Inner wall
;WIDTH:0.652201
G1 F1500
G1 X180.955 Y158.032 E.01863
G1 X181.389 Y158.398 E.02879
G1 X180.03 Y158.375 E.06887
G1 X180.272 Y158.124 E.01765
G1 X180.362 Y157.372 E.03838
G2 X180.49 Y157.528 I6.075 J-4.858 E.01022
G1 X180.679 Y157.732 E.01409
;PATH_TASK id=1 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X180.955 Y158.032 E-.06524
G1 X181.389 Y158.398 E-.09091
G1 X181.365 Y158.398 E-.00385
M73 P75 R9
;WIPE_END
G1 Z.6 F24000
G1 X181.559 Y158.132 Z.6
G1 X181.659 Y158.205
G1 X181.822 Y158.301
G1 X182.041 Y158.373
G1 X182.227 Y158.425
G1 X182.383 Y158.462
G1 X182.554 Y158.49
G1 X182.723 Y158.506
G1 X183.441 Y158.533
G1 X183.567 Y157.604
G1 X183.586 Y156.532
G1 X183.775 Y156.536
G1 Z.2
G1 E.8 F1800
;WIDTH:0.407186
G1 F1500
G1 X183.802 Y154.391 E.06496
;PATH_TASK id=2 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.416636
G1 X183.757 Y154.23 E.0052
;PATH_TASK id=3 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.458318
G1 X183.711 Y154.069 E.00578
;PATH_TASK id=4 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X183.666 Y153.908 E.00635
G1 X183.304 Y153.717 E.01557
G1 X183.185 Y153.706 E.00453
G1 X182.012 Y153.695 E.04459
G1 X181.625 Y153.896 E.01658
G1 X181.444 Y154.215 E.01393
G1 X181.441 Y154.801 E.02227
G1 X181.023 Y154.362 E.02302
G1 X180.477 Y153.971 E.02551
G1 X179.818 Y153.714 E.02689
G1 X179.124 Y153.656 E.02648
G1 X178.628 Y153.74 E.01911
G1 X177.996 Y154.037 E.02654
G1 X177.755 Y154.237 E.0119
G1 X177.356 Y154.694 E.02306
G1 X177.072 Y155.315 E.02595
G1 X176.971 Y155.882 E.0219
G1 X177.009 Y156.71 E.03148
G1 X177.241 Y157.408 E.02798
G1 X177.516 Y157.827 E.01904
G1 X178 Y158.264 E.02479
G1 X178.291 Y158.422 E.01258
G1 X177.604 Y158.41 E.02614
G1 X177.323 Y158.465 E.01086
G1 X177.166 Y158.558 E.00696
G1 X176.906 Y159.084 E.02227
G1 X176.893 Y159.867 E.02976
G1 X176.983 Y160.218 E.01376
G1 X177.2 Y160.45 E.01212
G1 X177.574 Y160.697 E.01701
G1 X177.956 Y161.146 E.0224
G1 X178.287 Y161.748 E.02612
G1 X178.422 Y161.934 E.00871
G1 X178.739 Y162.111 E.01383
G1 X178.871 Y162.13 E.00505
G2 X180.105 Y162.119 I.294 J-35.352 E.0469
G1 X180.397 Y161.993 E.0121
G1 X180.616 Y161.715 E.01346
G1 X180.629 Y161.204 E.01943
G1 X180.445 Y160.838 E.01557
G1 X180.762 Y160.899 E.01227
G2 X183.067 Y160.974 I2.292 J-34.706 E.08766
G1 X183.479 Y160.846 E.0164
G1 X183.599 Y160.624 E.00961
;PATH_TASK id=5 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.465683
G1 X183.72 Y160.401 E.00889
;PATH_TASK id=6 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.431367
G1 X183.727 Y160.3 E.00329
;PATH_TASK id=7 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.42507
G1 X183.741 Y159.2 E.03495
;PATH_TASK id=8 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.451576
G1 X183.705 Y159.011 E.00655
;PATH_TASK id=9 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.487439
G1 X183.669 Y158.821 E.00713
G1 X183.554 Y158.696 E.00629
;PATH_TASK id=10 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 X183.673 Y158.574 E.00629
G1 X183.713 Y158.386 E.00711
;PATH_TASK id=11 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.447313
G1 X183.754 Y158.198 E.00647
;PATH_TASK id=1 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.407186
G1 X183.774 Y156.576 E.04915
;PATH_TASK id=12 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X183.787 Y155.576 E-.16
;WIPE_END
G1 Z.6 F24000
G1 X183.602 Y155.573 Z.6
G1 X183.514 Y160.739
G1 X181.103 Y160.698
G1 X180.644 Y160.554
G1 X180.187 Y160.347
G1 X179.73 Y160.134
G1 X179.541 Y160.347
G1 X179.44 Y160.258
G1 Z.2
G1 E.8 F1800
;TYPE:Outer wall
;WIDTH:0.499999
G1 F1500
G1 X179.862 Y160.243 E.01607
G1 X180.837 Y160.426 E.0377
G2 X183.075 Y160.496 I2.256 J-36.427 E.0851
G1 X183.2 Y160.457 E.00495
G1 X183.283 Y160.325 E.00594
G1 X183.305 Y159.193 E.04303
;PATH_TASK id=13 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.507902
G1 X183.227 Y159.022 E.00724
;PATH_TASK id=14 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.543945
G1 X183.09 Y158.96 E.00625
G1 X182.229 Y158.967 E.03588
;PATH_TASK id=15 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X180.488 Y158.938 E.06618
;PATH_TASK id=16 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.547059
G1 X179.584 Y158.883 E.03797
;PATH_TASK id=17 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.594119
G1 X178.68 Y158.829 E.04151
;PATH_TASK id=18 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.655761
G1 X178.543 Y158.846 E.00706
;PATH_TASK id=19 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.616821
G1 X178.405 Y158.863 E.00661
;PATH_TASK id=20 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.57788
G1 X178.268 Y158.88 E.00616
;PATH_TASK id=21 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.53894
G1 X178.13 Y158.898 E.00571
;PATH_TASK id=12 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X177.511 Y158.905 E.02354
G1 X177.385 Y159.092 E.00857
G1 X177.375 Y159.914 E.03126
G1 X177.464 Y160.051 E.00622
G1 X177.888 Y160.331 E.01931
G1 X178.195 Y160.671 E.01741
G1 X178.491 Y161.098 E.01974
G1 X178.737 Y161.57 E.02021
G1 X178.893 Y161.652 E.0067
G1 X180.022 Y161.647 E.04293
G1 X180.17 Y161.54 E.00693
G1 X180.162 Y161.331 E.00795
G1 X179.847 Y160.704 E.02669
G1 X179.62 Y160.522 E.01103
G1 X179.462 Y160.291 E.01063
;PATH_TASK id=22 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X179.862 Y160.243 E-.06445
G1 X180.449 Y160.353 E-.09555
;WIPE_END
G1 Z.6 F24000
G1 X180.407 Y160.447 Z.6
G1 X180.644 Y160.554
G1 X181.103 Y160.698
G1 X183.514 Y160.739
G1 X183.567 Y157.604
G1 X183.586 Y156.513
G1 X184.125 Y156.523
G1 Z.2
G1 E.8 F1800
;TYPE:Inner wall
;WIDTH:0.407186
G1 F1500
G1 X184.118 Y158.201 E.05085
;PATH_TASK id=23 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.447313
G1 X184.098 Y158.451 E.00843
;PATH_TASK id=24 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.487439
G2 X184.096 Y158.952 I1.641 J.257 E.01859
;PATH_TASK id=25 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.451576
G1 X184.114 Y159.203 E.00856
;PATH_TASK id=26 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.42507
G1 X184.109 Y160.376 E.03726
;PATH_TASK id=27 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.462535
G1 X184.09 Y160.763 E.01352
;PATH_TASK id=28 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X184.071 Y161.15 E.01472
G1 X184.071 Y165.061 E.14866
G1 X184.088 Y165.398 E.01282
;PATH_TASK id=29 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.466706
G1 X184.105 Y165.735 E.01189
;PATH_TASK id=30 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.452526
G1 X184.095 Y166.417 E.02322
;PATH_TASK id=31 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X184.071 Y167.045 E.0239
G1 X184.072 Y168.913 E.071
;PATH_TASK id=32 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.507682
G2 X184.071 Y170.943 I74.874 J1.046 E.07844
;PATH_TASK id=33 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X184.071 Y174.342 E.12917
;PATH_TASK id=34 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.541524
G2 X184.065 Y175.552 I10.5 J.661 E.05018
;PATH_TASK id=35 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.538629
G2 X184.071 Y176.762 I11.194 J.546 E.04992
;PATH_TASK id=36 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X184.071 Y184.083 E.27824
;PATH_TASK id=37 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.539058
G1 X184.052 Y184.305 E.00919
;PATH_TASK id=38 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.578117
G1 X184.032 Y184.527 E.00991
;PATH_TASK id=39 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.617175
G1 X184.013 Y184.749 E.01064
G1 X184.022 Y185.407 E.03146
;PATH_TASK id=40 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.633744
G1 X184.005 Y185.933 E.02584
G1 X184.027 Y186.142 E.01031
;PATH_TASK id=41 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.589163
G1 X184.049 Y186.35 E.00953
;PATH_TASK id=42 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.544581
G1 X184.071 Y186.559 E.00875
;PATH_TASK id=43 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X184.071 Y192.922 E.24183
;PATH_TASK id=44 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.542136
G1 X184.05 Y193.11 E.00787
;PATH_TASK id=45 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.584272
G1 X184.029 Y193.298 E.00853
;PATH_TASK id=46 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.626408
G1 X184.008 Y193.487 E.0092
;PATH_TASK id=47 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.668544
G1 X183.987 Y193.675 E.00986
;PATH_TASK id=48 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.71068
G1 X183.966 Y193.864 E.01053
;PATH_TASK id=49 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.719637
G1 X183.962 Y194.926 E.05979
G1 X183.984 Y195.005 E.00462
;PATH_TASK id=50 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.67571
G1 X184.006 Y195.084 E.00432
;PATH_TASK id=51 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.631782
G1 X184.028 Y195.164 E.00402
;PATH_TASK id=52 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.587855
G1 X184.049 Y195.243 E.00372
;PATH_TASK id=53 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.543927
G1 X184.071 Y195.322 E.00342
;PATH_TASK id=54 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X184.071 Y207.571 E.46556
G1 X182.883 Y207.571 E.04519
G1 X182.729 Y207.595 E.0059
;PATH_TASK id=55 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.453294
G1 X182.576 Y207.618 E.00529
;PATH_TASK id=56 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.406588
G1 X182.422 Y207.642 E.00469
;PATH_TASK id=57 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.361434
G1 X181.895 Y207.641 E.01398
;PATH_TASK id=58 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.407623
G1 X181.711 Y207.618 E.00561
;PATH_TASK id=59 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.453811
G1 X181.528 Y207.595 E.00632
;PATH_TASK id=60 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X181.344 Y207.571 E.00703
G1 X179.201 Y207.574 E.08146
;PATH_TASK id=61 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.495392
G1 X178.866 Y207.588 E.01258
;PATH_TASK id=62 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.467204
G1 X178.532 Y207.602 E.0118
;PATH_TASK id=63 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.469508
G1 X178.168 Y207.587 E.01295
;PATH_TASK id=64 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X177.803 Y207.571 E.01387
G1 X175.929 Y207.571 E.07124
G1 X175.929 Y205.811 E.06692
G1 X175.909 Y205.563 E.00945
;PATH_TASK id=65 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.461805
G1 X175.89 Y205.315 E.00866
;PATH_TASK id=66 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.423611
G1 X175.871 Y205.067 E.00787
;PATH_TASK id=67 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.385416
G1 X175.869 Y204.404 E.01888
;PATH_TASK id=68 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.419956
G1 X175.889 Y204.208 E.00618
;PATH_TASK id=69 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.459978
G1 X175.909 Y204.012 E.00684
;PATH_TASK id=70 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X175.929 Y203.815 E.0075
G1 X175.929 Y195.537 E.31463
G1 X175.913 Y194.64 E.03408
;PATH_TASK id=71 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.475621
G1 X175.916 Y193.755 E.03185
;PATH_TASK id=72 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X175.929 Y192.858 E.03411
G1 X175.929 Y186.131 E.25565
;PATH_TASK id=73 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.544931
G1 X175.951 Y185.38 E.0314
;PATH_TASK id=74 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.572539
G1 X175.965 Y184.545 E.03676
G1 X175.947 Y184.293 E.0111
;PATH_TASK id=75 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.536269
G1 X175.929 Y184.042 E.01034
;PATH_TASK id=76 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X175.929 Y176.439 E.28896
;PATH_TASK id=77 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.540429
G1 X175.949 Y176.195 E.01015
;PATH_TASK id=78 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.580859
G1 X175.969 Y175.95 E.01097
;PATH_TASK id=79 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.621289
G1 X175.989 Y175.706 E.01179
;PATH_TASK id=80 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.642037
G1 X176 Y175.086 E.03085
G1 X175.982 Y174.99 E.00488
;PATH_TASK id=81 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.607634
G1 X175.965 Y174.894 E.0046
;PATH_TASK id=82 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.573231
G1 X175.948 Y174.797 E.00432
;PATH_TASK id=83 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.538828
G1 X175.929 Y174.3 E.02053
;PATH_TASK id=84 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X175.929 Y170.754 E.13477
;PATH_TASK id=85 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.542771
G1 X175.95 Y170.462 E.01216
;PATH_TASK id=86 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.585543
G1 X175.971 Y170.171 E.0132
;PATH_TASK id=87 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.628315
G1 X175.993 Y169.879 E.01424
;PATH_TASK id=88 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.671086
G1 X176.014 Y169.587 E.01528
;PATH_TASK id=89 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.677827
G1 X176.017 Y168.786 E.04232
G1 X175.995 Y168.504 E.01493
;PATH_TASK id=90 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.63337
G1 X175.973 Y168.222 E.01388
;PATH_TASK id=91 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.588913
G1 X175.951 Y167.94 E.01284
;PATH_TASK id=92 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.544456
G1 X175.929 Y167.658 E.01179
;PATH_TASK id=93 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X175.929 Y166.951 E.02688
;PATH_TASK id=94 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.542732
G1 X175.95 Y166.805 E.00613
;PATH_TASK id=95 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.585465
G1 X175.971 Y166.659 E.00666
;PATH_TASK id=96 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.628197
G1 X175.993 Y166.513 E.00718
;PATH_TASK id=97 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.67093
G1 X176.014 Y166.367 E.0077
;PATH_TASK id=98 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.713662
G1 X176.035 Y166.221 E.00823
;PATH_TASK id=99 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.714644
G1 X176.036 Y165.534 E.03836
G1 X176.014 Y165.444 E.00519
;PATH_TASK id=100 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.671715
G1 X175.993 Y165.353 E.00486
;PATH_TASK id=101 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.628786
G1 X175.971 Y165.263 E.00453
;PATH_TASK id=102 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.585857
G1 X175.95 Y165.172 E.0042
;PATH_TASK id=103 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.542928
G1 X175.929 Y165.082 E.00387
;PATH_TASK id=104 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X175.929 Y152.429 E.4809
G1 X184.071 Y152.429 E.30948
G1 X184.071 Y153.741 E.0499
;PATH_TASK id=105 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 X184.092 Y153.958 E.00827
;PATH_TASK id=106 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.458318
G1 X184.113 Y154.175 E.00752
;PATH_TASK id=107 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.416636
G1 X184.134 Y154.391 E.00676
;PATH_TASK id=22 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.407186
G1 X184.125 Y156.483 E.06335
;PATH_TASK id=108 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X184.121 Y157.483 E-.16
;WIPE_END
G1 Z.6 F24000
G1 X183.57 Y157.473 Z.6
G1 X183.629 Y153.956
G1 X181.668 Y153.923
G1 X181.771 Y154.953
G1 X182.043 Y155.841
G1 X182.183 Y156.285
G1 X181.995 Y156.43
G1 X182.06 Y156.514
G1 Z.2
G1 E.8 F1800
;TYPE:Outer wall
;WIDTH:0.499999
G1 F1500
G1 X181.841 Y156.283 E.01207
G1 X181.492 Y155.81 E.02236
G1 X181.135 Y155.175 E.02768
G1 X180.733 Y154.743 E.02245
G1 X180.286 Y154.41 E.0212
G1 X179.759 Y154.189 E.02172
G1 X179.204 Y154.128 E.02122
G1 X178.649 Y154.232 E.02143
G1 X178.169 Y154.498 E.02086
G1 X177.784 Y154.907 E.02134
G1 X177.558 Y155.362 E.01934
G1 X177.45 Y155.874 E.01989
G1 X177.469 Y156.578 E.02674
G1 X177.641 Y157.146 E.02256
G1 X177.916 Y157.564 E.01904
G1 X178.303 Y157.894 E.01933
;PATH_TASK id=109 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.53894
G1 X178.414 Y157.965 E.00543
;PATH_TASK id=110 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.57788
G1 X178.525 Y158.037 E.00585
;PATH_TASK id=111 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.616821
G1 X178.635 Y158.108 E.00628
;PATH_TASK id=112 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.655761
G1 X178.746 Y158.179 E.00671
G1 X179.151 Y158.232 E.02079
;PATH_TASK id=113 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.62506
G1 X179.555 Y158.285 E.01975
;PATH_TASK id=114 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.594358
G1 X179.638 Y158.171 E.00644
;PATH_TASK id=115 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.547179
G1 X179.721 Y158.058 E.00589
;PATH_TASK id=116 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X179.787 Y157.506 E.02113
;PATH_TASK id=117 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.543378
G1 X179.851 Y156.794 E.02977
;PATH_TASK id=118 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.545435
G1 X179.815 Y156.744 E.00255
G1 X179.466 Y156.677 E.01485
;PATH_TASK id=119 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X179.109 Y156.609 E.01381
G1 X178.946 Y156.481 E.00788
G1 X178.848 Y156.205 E.01114
G1 X178.915 Y155.88 E.01259
G1 X179.1 Y155.693 E.01001
G1 X179.266 Y155.661 E.00645
G1 X179.49 Y155.714 E.00873
G1 X179.823 Y155.94 E.01528
;PATH_TASK id=120 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.545435
G2 X180.55 Y156.727 I17.158 J-15.124 E.0448
;PATH_TASK id=121 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G2 X181.362 Y157.656 I8.341 J-6.473 E.0469
G1 X181.777 Y157.999 E.02046
G1 X182.264 Y158.264 E.0211
;PATH_TASK id=122 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.526853
G1 X182.481 Y158.333 E.00914
;PATH_TASK id=123 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.553706
G1 X182.697 Y158.401 E.00964
G1 X183.106 Y158.416 E.01736
;PATH_TASK id=124 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.543945
G1 X183.238 Y158.359 E.00602
;PATH_TASK id=125 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.507902
G1 X183.318 Y158.223 E.00609
;PATH_TASK id=108 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X183.386 Y154.395 E.14553
G1 X183.326 Y154.245 E.00612
G1 X183.217 Y154.188 E.0047
G1 X182.111 Y154.175 E.04204
G1 X181.963 Y154.235 E.00608
G1 X181.902 Y154.367 E.00552
G1 X181.937 Y155.15 E.0298
G1 X182.041 Y155.8 E.025
G1 X182.059 Y156.474 E.02563
;PATH_TASK id=126 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X181.841 Y156.283 E-.04624
G1 X181.492 Y155.81 E-.09412
G1 X181.432 Y155.703 E-.01964
;WIPE_END
G1 Z.6 F24000
G1 X181.506 Y155.673 Z.6
G1 X181.424 Y155.468
G1 X181.25 Y155.067
G1 X181.138 Y154.834
G1 X181.02 Y154.683
G1 X180.903 Y154.574
G1 X180.768 Y154.459
G1 X180.603 Y154.333
G1 X180.433 Y154.221
G1 X180.254 Y154.121
G1 X180.043 Y154.03
G1 X179.851 Y153.967
G1 X179.658 Y153.923
G1 X179.458 Y153.896
G1 X179.234 Y153.889
G1 X179.082 Y153.897
G1 X178.91 Y153.918
G1 X178.771 Y153.947
G1 X178.607 Y153.994
G1 X178.473 Y154.045
G1 X178.318 Y154.118
G1 X178.195 Y154.189
G1 X178.051 Y154.289
G1 X177.915 Y154.401
G1 X177.812 Y154.499
G1 X177.701 Y154.622
G1 X177.609 Y154.742
G1 X177.527 Y154.867
G1 X177.452 Y155
G1 X177.374 Y155.174
G1 X177.322 Y155.318
G1 X177.28 Y155.464
G1 X177.243 Y155.638
G1 X177.216 Y155.823
G1 X177.202 Y156.018
G1 X177.2 Y156.212
G1 X177.209 Y156.404
G1 X177.229 Y156.584
G1 X177.256 Y156.736
G1 X177.298 Y156.907
G1 X177.345 Y157.052
G1 X177.411 Y157.214
G1 X177.479 Y157.351
G1 X177.568 Y157.5
G1 X177.657 Y157.624
G1 X177.762 Y157.75
G1 X177.896 Y157.884
G1 X178.045 Y158.006
G1 X178.206 Y158.114
G1 X178.372 Y158.204
G1 X178.509 Y158.264
G1 X178.665 Y158.31
G1 X178.84 Y158.342
G1 X179.021 Y158.368
G1 X179.856 Y158.477
G1 X180.085 Y156.547
G1 X179.437 Y155.948
G1 X179.461 Y155.962
G1 X179.362 Y156.133
G1 Z.2
G1 E.8 F1800
;TYPE:Inner wall
;WIDTH:0.499964
G1 F1500
G2 X179.391 Y156.182 I-.025 J.047 E.01051
;PATH_TASK id=127 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X179.362 Y156.232 E-.032
G1 X179.305 Y156.232 E-.032
G1 X179.277 Y156.182 E-.032
G1 X179.305 Y156.133 E-.032
G1 X179.362 Y156.133 E-.032
;WIPE_END
G1 Z.6 F24000
G1 X179.461 Y155.962 Z.6
G1 X180.085 Y156.547
G1 X179.856 Y158.477
G1 X177.157 Y158.645
G1 X177.034 Y165.877
G1 X177.041 Y166.075
G1 X177.06 Y166.245
G1 X177.097 Y166.436
G1 X177.146 Y166.607
G1 X177.22 Y166.793
G1 X177.297 Y166.944
G1 X177.384 Y167.085
G1 X177.486 Y167.22
G1 X177.608 Y167.355
G1 X177.713 Y167.456
G1 X177.824 Y167.549
G1 X177.957 Y167.646
G1 X178.063 Y167.714
G1 X178.215 Y167.799
G1 X178.381 Y167.879
G1 X178.522 Y167.937
G1 X178.669 Y167.989
G1 X180.427 Y168.482
G1 X181.873 Y168.437
G1 X183.382 Y168.463
G1 X183.349 Y170.448
G1 X180.938 Y170.407
G1 X180.479 Y170.263
G1 X180.42 Y170.236
G1 X180.28 Y170.547
G1 Z.2
G1 E.8 F1800
;WIDTH:0.499999
G1 F1500
G1 X180.597 Y170.607 E.01227
G2 X182.902 Y170.683 I2.314 J-35.396 E.08766
G1 X183.314 Y170.554 E.0164
;PATH_TASK id=128 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.514599
G1 X183.596 Y170.117 E.02041
G1 X183.603 Y170.009 E.00424
;PATH_TASK id=129 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.507682
G1 X183.617 Y168.898 E.04295
;PATH_TASK id=130 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X183.282 Y168.308 E.02577
G1 X182.944 Y168.212 E.01337
G1 X182.079 Y168.198 E.03287
G1 X182.684 Y167.914 E.02537
G1 X183.15 Y167.52 E.02321
G1 X183.527 Y166.956 E.0258
G1 X183.611 Y166.627 E.01289
;PATH_TASK id=131 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.473245
G1 X183.695 Y166.298 E.01214
;PATH_TASK id=132 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.446491
G1 X183.714 Y165.735 E.01891
;PATH_TASK id=133 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.466706
G1 X183.67 Y165.422 E.01113
;PATH_TASK id=134 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X183.626 Y165.11 E.012
G1 X183.548 Y164.911 E.00813
G1 X183.179 Y164.34 E.02581
G1 X182.706 Y163.929 E.02382
G1 X182.212 Y163.663 E.02132
G1 X181.536 Y163.456 E.02688
G1 X180.755 Y163.354 E.02991
G2 X179.578 Y163.354 I-.577 J27.829 E.04477
G1 X178.806 Y163.479 E.0297
G1 X178.146 Y163.718 E.02669
G1 X177.621 Y164.057 E.02374
G1 X177.234 Y164.465 E.02137
G1 X176.949 Y164.997 E.02294
;PATH_TASK id=135 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.542928
G1 X176.899 Y165.117 E.00539
;PATH_TASK id=136 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.585857
G1 X176.85 Y165.237 E.00585
;PATH_TASK id=137 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.628786
G1 X176.801 Y165.357 E.00631
;PATH_TASK id=138 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.671715
G1 X176.751 Y165.476 E.00678
;PATH_TASK id=139 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.714644
G1 X176.702 Y165.596 E.00724
G1 X176.693 Y165.773 E.00988
;PATH_TASK id=140 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.721792
G1 X176.713 Y166.315 E.03064
G1 X176.74 Y166.353 E.00261
;PATH_TASK id=141 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.686792
G1 X176.767 Y166.391 E.00247
;PATH_TASK id=142 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.651791
G1 X176.836 Y166.537 E.00817
;PATH_TASK id=143 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.613843
G1 X176.904 Y166.682 E.00766
;PATH_TASK id=144 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.575895
G1 X176.973 Y166.828 E.00715
;PATH_TASK id=145 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.537947
G1 X177.042 Y166.974 E.00664
;PATH_TASK id=146 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X177.369 Y167.447 E.02186
G1 X177.894 Y167.89 E.0261
G1 X178.367 Y168.134 E.02023
;PATH_TASK id=147 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G2 X177.218 Y168.151 I-.425 J9.955 E.04372
G1 X177.037 Y168.24 E.00764
;PATH_TASK id=148 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.544456
G1 X176.941 Y168.378 E.00701
;PATH_TASK id=149 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.588913
G1 X176.845 Y168.515 E.00763
;PATH_TASK id=150 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.63337
G1 X176.749 Y168.653 E.00825
;PATH_TASK id=151 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.677827
G1 X176.652 Y168.791 E.00887
;PATH_TASK id=152 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.679309
G1 X176.65 Y169.721 E.04922
G1 X176.746 Y169.831 E.00772
;PATH_TASK id=153 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.634482
G1 X176.843 Y169.94 E.00717
;PATH_TASK id=154 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.589654
G1 X176.939 Y170.05 E.00663
;PATH_TASK id=155 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.544827
G1 X177.035 Y170.159 E.00609
;PATH_TASK id=127 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X177.328 Y170.352 E.01332
G1 X177.668 Y170.679 E.01793
G3 X178.197 Y171.576 I-4.493 J3.252 E.03964
G1 X178.419 Y171.761 E.01099
G1 X178.617 Y171.829 E.00796
G2 X179.99 Y171.817 I.556 J-14.679 E.05218
G1 X180.296 Y171.647 E.0133
G1 X180.451 Y171.425 E.01029
G1 X180.464 Y170.912 E.01948
G1 X180.298 Y170.582 E.01405
;PATH_TASK id=156 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X180.597 Y170.607 E-.04802
G1 X181.296 Y170.643 E-.11198
;WIPE_END
G1 Z.6 F24000
G1 X181.3 Y170.413 Z.6
G1 X180.938 Y170.407
G1 X180.479 Y170.263
G1 X180.022 Y170.056
G1 X179.564 Y169.843
G1 X179.376 Y170.056
G1 X179.275 Y169.967
G1 Z.2
G1 E.8 F1800
;TYPE:Outer wall
G1 F1500
G1 X179.742 Y169.955 E.01776
;PATH_TASK id=157 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 X180.672 Y170.135 E.03601
G2 X182.756 Y170.202 I2.168 J-34.918 E.07926
G1 X183.034 Y170.166 E.01066
G1 X183.117 Y170.033 E.00594
G1 X183.139 Y168.901 E.04303
G1 X183.038 Y168.72 E.0079
G1 X182.936 Y168.691 E.00404
G1 X181.862 Y168.673 E.04081
;PATH_TASK id=158 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.538494
G1 X181.627 Y168.649 E.00973
;PATH_TASK id=159 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.576989
G1 X181.392 Y168.626 E.01049
;PATH_TASK id=160 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.615484
G1 X181.157 Y168.603 E.01124
G1 X180.5 Y168.605 E.03131
;PATH_TASK id=161 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.591484
G1 X179.81 Y168.592 E.03148
;PATH_TASK id=162 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.630006
G1 X179.096 Y168.561 E.03485
G1 X178.851 Y168.578 E.01203
;PATH_TASK id=163 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.586671
G1 X178.605 Y168.595 E.01114
;PATH_TASK id=164 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.543335
G1 X178.359 Y168.613 E.01025
;PATH_TASK id=156 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X177.334 Y168.619 E.03897
G1 X177.22 Y168.801 E.00815
G1 X177.206 Y169.584 E.02976
G1 X177.299 Y169.76 E.00757
M73 P76 R9
G1 X177.592 Y169.953 E.01332
G1 X177.957 Y170.288 E.01883
G1 X178.319 Y170.799 E.0238
G1 X178.551 Y171.245 E.01913
G1 X178.641 Y171.337 E.00488
G1 X179.053 Y171.36 E.01567
G1 X179.907 Y171.341 E.03246
G1 X180.012 Y171.234 E.00569
G1 X179.997 Y171.04 E.00742
G1 X179.681 Y170.412 E.02668
G1 X179.455 Y170.231 E.01103
G1 X179.297 Y170 E.01063
;PATH_TASK id=165 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X179.742 Y169.955 E-.07149
G1 X180.285 Y170.06 E-.08851
;WIPE_END
G1 Z.6 F24000
G1 X180.242 Y170.156 Z.6
G1 X180.479 Y170.263
G1 X180.938 Y170.407
G1 X183.349 Y170.448
G1 X183.512 Y165.909
G1 X183.504 Y165.7
G1 X183.478 Y165.495
G1 X183.434 Y165.293
G1 X183.384 Y165.139
G1 X183.159 Y165.213
G1 Z.2
G1 E.8 F1800
G1 F1500
G1 X182.893 Y164.739 E.02063
G1 X182.511 Y164.375 E.02005
G1 X182.081 Y164.128 E.01888
G1 X181.441 Y163.926 E.02551
G1 X180.695 Y163.828 E.02856
G1 X179.646 Y163.828 E.03988
G1 X178.965 Y163.931 E.02619
G1 X178.362 Y164.144 E.02429
G1 X177.884 Y164.457 E.02172
G1 X177.596 Y164.778 E.0164
G1 X177.379 Y165.207 E.01828
G1 X177.278 Y165.704 E.01928
G1 X177.291 Y166.186 E.0183
G1 X177.425 Y166.669 E.01906
G1 X177.69 Y167.092 E.01896
G1 X178.113 Y167.465 E.02144
G1 X178.586 Y167.708 E.02023
;PATH_TASK id=166 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.543335
G1 X178.786 Y167.786 E.0089
;PATH_TASK id=167 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.586671
G1 X178.985 Y167.864 E.00967
;PATH_TASK id=168 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.630006
G1 X179.184 Y167.941 E.01044
G1 X179.872 Y168.003 E.03374
;PATH_TASK id=169 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.590148
G1 X180.531 Y168.017 E.02997
;PATH_TASK id=170 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.610911
G1 X181.176 Y167.981 E.03052
;PATH_TASK id=171 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 X181.378 Y167.921 E.00994
;PATH_TASK id=172 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.573941
G1 X181.58 Y167.861 E.00929
;PATH_TASK id=173 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.53697
G1 X181.781 Y167.8 E.00865
;PATH_TASK id=165 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X182.346 Y167.561 E.02333
G1 X182.766 Y167.236 E.02018
G1 X183.074 Y166.802 E.02022
G1 X183.241 Y166.303 E.02
G1 X183.269 Y165.735 E.02161
G1 X183.167 Y165.252 E.01877
;PATH_TASK id=174 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X182.893 Y164.739 E-.09296
G1 X182.59 Y164.45 E-.06704
;WIPE_END
G1 Z.6 F24000
G1 X182.742 Y164.255 Z.6
G1 X182.789 Y164.291
G1 X182.928 Y164.421
G1 X183.057 Y164.563
G1 X183.182 Y164.731
G1 X183.286 Y164.91
G1 X183.37 Y165.098
G1 X183.434 Y165.293
G1 X183.478 Y165.495
G1 X183.504 Y165.7
G1 X183.512 Y165.909
G1 X183.349 Y170.448
G1 X177.833 Y173.731
G1 X177.657 Y173.856
G1 X177.497 Y173.997
G1 X177.365 Y174.138
G1 X177.239 Y174.303
G1 X177.129 Y174.483
G1 X177.038 Y174.676
G1 X176.969 Y174.872
G1 X176.918 Y175.074
G1 X176.885 Y175.284
G1 X176.87 Y175.483
G1 X176.871 Y175.726
G1 X176.891 Y175.952
G1 X176.932 Y176.172
G1 X176.994 Y176.386
G1 X177.079 Y176.592
G1 X177.186 Y176.788
G1 X177.315 Y176.97
G1 X177.46 Y177.131
G1 X177.559 Y177.224
G1 X177.657 Y177.306
G1 X177.761 Y177.381
G1 X177.87 Y177.449
G1 X177.983 Y177.509
G1 X178.1 Y177.561
G1 X178.22 Y177.605
G1 X178.343 Y177.641
G1 X178.468 Y177.668
G1 X178.604 Y177.689
G1 X178.828 Y177.702
G1 X178.965 Y177.698
G1 X179.104 Y177.685
G1 X179.321 Y177.642
G1 X179.531 Y177.571
G1 X179.66 Y177.51
G1 X179.66 Y177.51
G1 X179.746 Y177.661
G1 Z.2
G1 E.8 F1800
;TYPE:Inner wall
G1 F1500
G1 X180.224 Y177.984 E.02193
G1 X180.472 Y178.087 E.01021
G1 X181.024 Y178.178 E.02126
G1 X181.641 Y178.131 E.02351
G1 X182.193 Y177.947 E.02213
G1 X182.682 Y177.634 E.02207
G1 X183.102 Y177.188 E.02328
G1 X183.392 Y176.662 E.02283
;PATH_TASK id=175 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.53289
G1 X183.566 Y176.084 E.02459
G1 X183.595 Y175.552 E.02173
;PATH_TASK id=176 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.541524
G1 X183.554 Y175.017 E.02221
G1 X183.357 Y174.462 E.02443
;PATH_TASK id=177 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X183.076 Y173.987 E.021
G1 X182.643 Y173.546 E.02346
G1 X182.119 Y173.229 E.0233
G1 X181.583 Y173.073 E.0212
G1 X181.086 Y173.034 E.01895
G1 X180.517 Y173.129 E.02191
G1 X180.185 Y173.247 E.01341
G1 X179.849 Y173.504 E.01607
G1 X179.401 Y173.312 E.01853
G1 X179.056 Y173.222 E.01356
G2 X178.304 Y173.271 I-.028 J5.308 E.02866
G1 X177.818 Y173.467 E.01991
G1 X177.26 Y173.901 E.02686
G1 X176.873 Y174.463 E.02594
;PATH_TASK id=178 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.547345
G1 X176.782 Y174.678 E.0098
;PATH_TASK id=179 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.594691
G1 X176.69 Y174.893 E.01072
;PATH_TASK id=180 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.642037
G1 X176.598 Y175.108 E.01164
G1 X176.578 Y175.842 E.03659
;PATH_TASK id=181 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.625936
G1 X176.65 Y176.073 E.01174
;PATH_TASK id=182 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.583957
G1 X176.722 Y176.304 E.01089
;PATH_TASK id=183 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.541978
G1 X176.794 Y176.535 E.01005
;PATH_TASK id=184 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X177.04 Y176.997 E.0199
G1 X177.47 Y177.462 E.02407
G1 X177.973 Y177.765 E.0223
G1 X178.528 Y177.912 E.02182
;PATH_TASK id=174 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 X178.913 Y177.93 E.01466
G1 X179.197 Y177.882 E.01096
G1 X179.709 Y177.676 E.02096
;PATH_TASK id=185 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 X179.637 Y177.521 F24000
G1 X179.66 Y177.51
G1 X179.519 Y176.95
G1 X179.86 Y176.823
G1 X179.832 Y176.716
;TYPE:Outer wall
;WIDTH:0.382232
G1 F1500
G1 X179.995 Y176.977 E.00867
G1 X179.975 Y177.061 E.00244
;PATH_TASK id=186 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.421488
G1 X179.985 Y177.127 E.0021
;PATH_TASK id=187 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.460744
G1 X179.995 Y177.192 E.00231
;PATH_TASK id=188 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X180.005 Y177.258 E.00253
G1 X180.492 Y177.587 E.02233
G1 X180.953 Y177.696 E.01799
G1 X181.457 Y177.68 E.01917
G1 X181.902 Y177.556 E.01758
G1 X182.305 Y177.325 E.01764
G1 X182.658 Y176.984 E.01867
G1 X182.913 Y176.571 E.01845
G1 X183.064 Y176.089 E.01917
G1 X183.109 Y175.568 E.0199
G1 X183.058 Y175.073 E.01889
G1 X182.905 Y174.619 E.01823
G1 X182.673 Y174.244 E.01675
G1 X182.313 Y173.893 E.01913
G1 X181.911 Y173.661 E.01763
G1 X181.462 Y173.536 E.01772
G1 X181.085 Y173.515 E.01433
G1 X180.469 Y173.644 E.02394
G1 X180.15 Y173.876 E.01499
G1 X179.926 Y174.108 E.01226
G1 X179.928 Y174.231 E.0047
G1 X179.858 Y174.354 E.00536
G3 X179.721 Y174.096 I.307 J-.329 E.01131
G1 X179.605 Y173.94 E.00738
G1 X179.057 Y173.7 E.02276
G1 X178.521 Y173.713 E.02035
G1 X178.094 Y173.858 E.01713
G1 X177.641 Y174.19 E.02136
G1 X177.324 Y174.624 E.02041
G1 X177.146 Y175.147 E.02101
G1 X177.107 Y175.706 E.02129
G1 X177.209 Y176.277 E.02207
G1 X177.375 Y176.642 E.01521
G1 X177.694 Y177.027 E.01901
G1 X178.062 Y177.282 E.01703
G1 X178.549 Y177.434 E.01939
;PATH_TASK id=189 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 X178.977 Y177.449 E.01627
G1 X179.523 Y177.237 E.02225
G1 X179.58 Y177.173 E.00329
;PATH_TASK id=190 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.45721
G1 X179.589 Y177.061 E.00386
;PATH_TASK id=191 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.419721
G1 X179.598 Y176.95 E.00351
;PATH_TASK id=185 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.382232
G1 X179.804 Y176.744 E.00819
;PATH_TASK id=192 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X179.995 Y176.977 E-.04811
G1 X179.975 Y177.061 E-.01382
G1 X179.985 Y177.127 E-.01065
G1 X179.995 Y177.192 E-.01065
G1 X180.005 Y177.258 E-.01065
G1 X180.348 Y177.489 E-.06612
;WIPE_END
G1 Z.6 F24000
G1 X179.286 Y183.332 Z.6
G1 Z.2
G1 E.8 F1800
;TYPE:Inner wall
;WIDTH:0.499999
G1 F1500
G1 X179.102 Y183.133 E.0103
G1 X178.715 Y182.91 E.01695
G1 X178.403 Y182.897 E.01188
G1 X177.905 Y182.991 E.01926
G1 X177.645 Y183.098 E.01069
G1 X177.217 Y183.391 E.0197
G1 X177.046 Y183.559 E.00911
G1 X176.665 Y184.153 E.02681
;PATH_TASK id=193 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.536269
G1 X176.574 Y184.388 E.01034
;PATH_TASK id=194 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.572539
G1 X176.483 Y184.623 E.0111
G1 X176.462 Y184.82 E.00873
;PATH_TASK id=195 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.550857
G1 X176.473 Y185.567 E.03155
;PATH_TASK id=196 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.543837
G1 X176.69 Y186.237 E.02933
;PATH_TASK id=197 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X177.084 Y186.845 E.02754
G1 X177.587 Y187.281 E.02532
G1 X178.167 Y187.579 E.02477
G1 X178.863 Y187.779 E.02751
G1 X179.53 Y187.87 E.02558
G1 X180.402 Y187.891 E.03315
G1 X181.162 Y187.802 E.02907
G1 X181.741 Y187.652 E.02275
G1 X182.397 Y187.308 E.02815
G1 X182.818 Y186.916 E.02187
G1 X183.166 Y186.39 E.02395
;PATH_TASK id=198 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.544581
G1 X183.25 Y186.221 E.00789
;PATH_TASK id=199 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.589163
G1 X183.334 Y186.051 E.00859
;PATH_TASK id=200 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.633744
G1 X183.418 Y185.882 E.00929
G1 X183.472 Y185.276 E.02987
;PATH_TASK id=201 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.617175
G1 X183.44 Y184.775 E.02399
G1 X183.404 Y184.694 E.00422
;PATH_TASK id=202 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.58053
G1 X183.368 Y184.614 E.00395
;PATH_TASK id=203 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.543884
G1 X183.137 Y184.074 E.02448
;PATH_TASK id=204 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X182.79 Y183.588 E.02268
G1 X182.325 Y183.198 E.02306
G1 X181.818 Y182.941 E.0216
G1 X181.255 Y182.789 E.02218
G1 X180.659 Y182.756 E.02265
G1 X180.118 Y182.84 E.02083
G1 X179.644 Y183.045 E.01962
G1 X179.317 Y183.307 E.01592
;PATH_TASK id=205 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 X178.955 Y183.367 F24000
G1 X178.955 Y183.367
G1 X178.861 Y184.349
G1 X178.996 Y184.362
;TYPE:Outer wall
;WIDTH:0.560779
G1 F1500
G1 X178.948 Y183.986 E.01632
;PATH_TASK id=206 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.530389
G1 X178.899 Y183.61 E.01536
;PATH_TASK id=207 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X178.648 Y183.4 E.01242
G1 X178.492 Y183.367 E.00608
G1 X177.915 Y183.493 E.02243
G1 X177.435 Y183.837 E.02242
G1 X177.123 Y184.293 E.02104
G1 X176.966 Y184.831 E.02127
G1 X176.96 Y185.449 E.02349
G1 X177.101 Y185.993 E.02137
G1 X177.409 Y186.494 E.02233
G1 X177.815 Y186.861 E.02082
G1 X178.265 Y187.104 E.01944
G1 X178.9 Y187.299 E.02525
G1 X179.52 Y187.389 E.02381
G1 X180.34 Y187.414 E.03118
G1 X180.894 Y187.37 E.02112
G1 X181.488 Y187.237 E.02315
G1 X182.037 Y186.977 E.02305
G1 X182.396 Y186.674 E.01785
G1 X182.695 Y186.264 E.01931
G1 X182.87 Y185.826 E.01792
G1 X182.944 Y185.303 E.02008
G1 X182.905 Y184.825 E.01824
G1 X182.759 Y184.382 E.01771
G1 X182.506 Y183.985 E.01788
G1 X182.138 Y183.647 E.019
G1 X181.721 Y183.416 E.01814
G1 X181.259 Y183.274 E.01837
G1 X180.902 Y183.241 E.0136
G1 X180.365 Y183.277 E.02047
G1 X179.893 Y183.456 E.01919
G1 X179.636 Y183.653 E.0123
G1 X179.471 Y183.859 E.01003
;PATH_TASK id=208 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.54057
G1 X179.235 Y184.158 E.01574
;PATH_TASK id=209 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.58114
G1 X178.999 Y184.456 E.01703
;PATH_TASK id=210 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 X178.998 Y184.402 E.00244
;PATH_TASK id=211 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X178.948 Y183.986 E-.06702
G1 X178.899 Y183.61 E-.06065
G1 X178.744 Y183.48 E-.03233
;WIPE_END
G1 Z.6 F24000
G1 X178.942 Y183.499 Z.6
G1 X178.747 Y185.973
G1 X179.29 Y185.876
G1 X179.262 Y185.851
G1 X179.127 Y185.998
G1 Z.2
G1 E.8 F1800
;WIDTH:0.551746
G1 F1500
G3 X178.614 Y185.819 I.623 J-2.62 E.02305
G1 X178.406 Y185.559 E.01409
;PATH_TASK id=212 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.563012
G1 X178.329 Y185.304 E.01149
G1 X178.336 Y185.015 E.01254
;PATH_TASK id=213 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.562891
G1 X178.483 Y184.716 E.01438
;PATH_TASK id=214 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.571974
G1 X178.825 Y184.612 E.01577
;PATH_TASK id=215 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.585184
G1 X178.985 Y184.496 E.00887
G1 X178.937 Y184.719 E.01028
;PATH_TASK id=216 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.571974
G1 X178.884 Y185.24 E.02302
;PATH_TASK id=217 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.565752
G1 X178.994 Y185.695 E.02035
;PATH_TASK id=218 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.551746
G1 X179.111 Y185.961 E.01231
;PATH_TASK id=219 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X178.982 Y185.959 E-.02073
G1 X178.614 Y185.819 E-.063
G1 X178.406 Y185.559 E-.0533
G1 X178.364 Y185.421 E-.02297
;WIPE_END
G1 Z.6 F24000
G1 X178.384 Y185.414 Z.6
G1 X178.851 Y184.453
G1 X178.955 Y183.367
G1 X178.424 Y183.07
G1 X178.264 Y183.104
G1 X178.137 Y183.138
G1 X177.982 Y183.192
G1 X177.829 Y183.259
G1 X177.685 Y183.336
G1 X177.573 Y183.407
G1 X177.439 Y183.507
G1 X177.287 Y183.646
G1 X177.138 Y183.816
G1 X177.022 Y183.981
G1 X176.922 Y184.161
G1 X176.832 Y184.374
G1 X176.774 Y184.572
G1 X176.735 Y184.768
G1 X176.71 Y184.992
G1 X176.706 Y185.236
G1 X176.72 Y185.447
G1 X176.751 Y185.653
G1 X176.8 Y185.854
G1 X176.868 Y186.053
G1 X176.971 Y186.273
G1 X177.084 Y186.459
G1 X181.772 Y192.733
G1 X182.958 Y193.428
G1 X182.924 Y195.413
G1 X181.97 Y195.397
G1 X181.966 Y195.64
G1 Z.2
G1 E.8 F1800
;TYPE:Inner wall
;WIDTH:0.499999
G1 F1500
G1 X182.693 Y195.618 E.02767
G1 X183.008 Y195.411 E.0143
G1 X183.121 Y195.172 E.01007
;PATH_TASK id=220 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.547254
G1 X183.166 Y195.131 E.00254
;PATH_TASK id=221 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.594509
G1 X183.211 Y195.09 E.00278
;PATH_TASK id=222 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.636219
G1 X183.235 Y195.033 E.00304
;PATH_TASK id=223 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.677928
G1 X183.26 Y194.977 E.00326
;PATH_TASK id=224 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.719637
G1 X183.285 Y194.92 E.00347
G1 X183.298 Y193.864 E.05947
;PATH_TASK id=225 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.71068
G1 X183.236 Y193.766 E.00642
;PATH_TASK id=226 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.668544
G1 X183.174 Y193.668 E.00602
;PATH_TASK id=227 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.626408
G1 X183.112 Y193.57 E.00561
;PATH_TASK id=228 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.584272
G1 X183.05 Y193.473 E.00521
;PATH_TASK id=229 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.542136
G1 X182.988 Y193.375 E.0048
;PATH_TASK id=230 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X182.578 Y193.182 E.01723
G1 X182.005 Y193.169 E.02181
G1 X181.915 Y192.823 E.01358
G1 X181.628 Y192.554 E.01495
G1 X181.404 Y192.487 E.00887
G2 X180.174 Y192.472 I-.981 J28.863 E.04676
G1 X179.91 Y192.569 E.01069
G1 X179.722 Y192.743 E.00978
G1 X179.591 Y193.128 E.01544
G1 X177.034 Y193.085 E.09721
G1 X176.622 Y193.213 E.0164
G1 X176.349 Y193.759 E.02318
;PATH_TASK id=231 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.475621
G1 X176.345 Y194.757 E.03591
;PATH_TASK id=232 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X176.603 Y195.194 E.01932
G1 X180.026 Y197.688 E.16094
;PATH_TASK id=219 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 X180.306 Y197.779 E.01122
G1 X181.243 Y197.797 E.03561
G1 X181.561 Y197.725 E.01241
G1 X181.739 Y197.597 E.00832
G1 X181.882 Y197.389 E.00957
G1 X181.94 Y197.123 E.01036
G1 X181.965 Y195.68 E.05486
;PATH_TASK id=233 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 X181.495 Y195.153 F24000
;TYPE:Outer wall
G1 F1500
G1 X182.485 Y195.17 E.03763
G1 X182.645 Y195.098 E.00668
G1 X182.693 Y194.999 E.00418
G1 X182.714 Y193.867 E.04303
G1 X182.653 Y193.716 E.0062
G1 X182.542 Y193.659 E.00474
G1 X181.521 Y193.64 E.0388
G1 X181.501 Y193.064 E.0219
G1 X181.347 Y192.962 E.00701
G1 X180.277 Y192.943 E.04067
G1 X180.164 Y192.975 E.00447
G1 X180.066 Y193.147 E.00751
G1 X180.058 Y193.615 E.0178
G1 X177.026 Y193.563 E.11527
G1 X176.902 Y193.602 E.00495
G1 X176.815 Y193.767 E.00706
G1 X176.8 Y194.637 E.03308
G1 X176.885 Y194.808 E.00725
G1 X180.296 Y197.298 E.1605
G1 X181.251 Y197.319 E.0363
G1 X181.401 Y197.258 E.00614
G1 X181.459 Y197.147 E.00475
G1 X181.495 Y195.193 E.07428
;PATH_TASK id=234 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X182.485 Y195.17 E-.15855
G1 X182.493 Y195.167 E-.00145
;WIPE_END
G1 Z.6 F24000
G1 X182.489 Y195.406 Z.6
G1 X182.803 Y202.489
G1 X182.724 Y207.181
G1 X181.887 Y207.148
G1 X181.709 Y207.125
G1 X181.531 Y207.082
G1 X181.371 Y207.026
G1 X181.155 Y206.929
G1 X180.99 Y206.838
G1 X180.833 Y206.738
G1 X180.68 Y206.627
G1 X180.516 Y206.492
G1 X180.381 Y206.367
G1 X180.248 Y206.234
G1 X180.119 Y206.097
G1 X179.95 Y206.256
G1 Z.2
G1 E.8 F1800
;TYPE:Inner wall
G1 F1500
G1 X180.253 Y206.578 E.01681
G1 X180.758 Y206.976 E.02445
G1 X181.378 Y207.282 E.02625
G1 X181.673 Y207.299 E.01126
;PATH_TASK id=235 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.45145
G1 X181.969 Y207.316 E.01006
;PATH_TASK id=236 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.402901
G1 X182.265 Y207.333 E.00887
G1 X182.426 Y207.298 E.00495
;PATH_TASK id=237 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.45145
G1 X182.588 Y207.263 E.00562
;PATH_TASK id=238 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X182.75 Y207.228 E.00629
G1 X182.956 Y206.877 E.01547
G1 X182.974 Y206.732 E.00555
G1 X183.038 Y202.936 E.1443
G1 X182.908 Y202.522 E.01651
G1 X182.624 Y202.295 E.0138
G1 X182.359 Y202.239 E.0103
G1 X181.289 Y202.229 E.04067
G1 X181.062 Y202.266 E.00873
G1 X180.821 Y202.408 E.01067
G1 X180.618 Y202.748 E.01503
G1 X180.615 Y203.334 E.02227
G1 X180.197 Y202.895 E.02302
G1 X179.651 Y202.504 E.02551
G1 X178.992 Y202.247 E.02689
G1 X178.298 Y202.189 E.02648
G1 X177.599 Y202.343 E.0272
G1 X177 Y202.698 E.02645
G1 X176.53 Y203.227 E.02692
G1 X176.246 Y203.848 E.02595
G1 X176.233 Y204.037 E.00719
;PATH_TASK id=239 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.459996
G1 X176.219 Y204.226 E.00656
;PATH_TASK id=240 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.419993
G1 X176.206 Y204.415 E.00593
;PATH_TASK id=241 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.414804
G1 X176.224 Y205.231 E.02526
;PATH_TASK id=242 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.457402
G1 X176.277 Y205.493 E.0092
;PATH_TASK id=243 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X176.33 Y205.754 E.01014
G1 X176.415 Y205.941 E.00782
G1 X176.69 Y206.36 E.01904
G1 X176.872 Y206.55 E.00997
G1 X177.318 Y206.887 E.02128
G1 X177.846 Y207.106 E.02172
;PATH_TASK id=244 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 X178.268 Y207.162 E.01617
;PATH_TASK id=245 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.465503
G1 X178.69 Y207.218 E.01495
;PATH_TASK id=246 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.4632
G1 X178.879 Y207.177 E.00677
;PATH_TASK id=247 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.495392
G1 X179.068 Y207.136 E.00729
;PATH_TASK id=234 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X179.356 Y206.729 E.01894
G1 X179.482 Y205.719 E.03868
G2 X179.75 Y206.043 I6.997 J-5.506 E.01598
G1 X179.922 Y206.227 E.00958
;PATH_TASK id=248 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X180.253 Y206.578 E-.07717
G1 X180.66 Y206.898 E-.08283
;WIPE_END
G1 Z.6 F24000
G1 X180.796 Y206.711 Z.6
G1 X180.833 Y206.738
G1 X180.99 Y206.838
G1 X181.155 Y206.929
G1 X181.371 Y207.026
G1 X181.531 Y207.082
G1 X181.709 Y207.125
G1 X181.887 Y207.148
G1 X182.724 Y207.181
G1 X182.803 Y202.489
G1 X180.842 Y202.456
G1 X180.945 Y203.486
G1 X181.217 Y204.374
G1 X181.357 Y204.818
G1 X181.169 Y204.963
G1 X181.234 Y205.047
G1 Z.2
G1 E.8 F1800
;TYPE:Outer wall
G1 F1500
G1 X181.016 Y204.817 E.01207
G1 X180.666 Y204.343 E.02236
G1 X180.309 Y203.708 E.02768
G1 X179.907 Y203.276 E.02245
G1 X179.46 Y202.943 E.0212
G1 X178.933 Y202.722 E.02172
G1 X178.378 Y202.661 E.02122
G1 X177.824 Y202.765 E.02143
G1 X177.343 Y203.032 E.02089
G1 X176.959 Y203.44 E.02131
G1 X176.732 Y203.896 E.01934
G1 X176.624 Y204.408 E.01988
G1 X176.643 Y205.111 E.02674
G1 X176.816 Y205.679 E.02256
G1 X177.09 Y206.098 E.01904
G1 X177.471 Y206.423 E.01904
G1 X177.935 Y206.636 E.01938
;PATH_TASK id=249 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 X178.651 Y206.77 E.02772
G1 X178.804 Y206.739 E.00593
G1 X178.891 Y206.616 E.00573
G1 X178.961 Y206.039 E.02207
;PATH_TASK id=250 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.543375
G1 X179.025 Y205.327 E.02977
;PATH_TASK id=251 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.545428
G1 X178.989 Y205.277 E.00255
G1 X178.458 Y205.191 E.02249
;PATH_TASK id=252 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G1 X178.183 Y205.093 E.0111
G1 X178.07 Y204.948 E.00699
G1 X178.022 Y204.738 E.00818
G1 X178.089 Y204.414 E.01259
G1 X178.274 Y204.226 E.01001
G1 X178.44 Y204.194 E.00645
G1 X178.664 Y204.248 E.00873
G1 X178.997 Y204.473 E.01528
;PATH_TASK id=253 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.545428
G2 X179.724 Y205.26 I17.182 J-15.146 E.0448
;PATH_TASK id=248 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.499999
G2 X180.536 Y206.189 I8.341 J-6.473 E.04691
G1 X180.951 Y206.532 E.02046
G1 X181.437 Y206.797 E.02105
G1 X181.877 Y206.908 E.01726
G1 X182.281 Y206.928 E.01534
G1 X182.428 Y206.874 E.00596
G1 X182.49 Y206.768 E.00467
G1 X182.56 Y202.928 E.14597
G1 X182.521 Y202.803 E.00499
G1 X182.355 Y202.717 E.00709
G1 X181.285 Y202.708 E.04067
G1 X181.159 Y202.749 E.00501
G1 X181.076 Y202.9 E.00657
G1 X181.111 Y203.684 E.0298
G1 X181.215 Y204.333 E.025
G1 X181.233 Y205.007 E.02563
;PATH_TASK id=254 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X181.016 Y204.817 E-.04624
G1 X180.666 Y204.343 E-.09412
G1 X180.606 Y204.236 E-.01964
;WIPE_END
G1 Z.6 F24000
G1 X180.68 Y204.206 Z.6
G1 X180.598 Y204.001
G1 X180.424 Y203.6
G1 X180.312 Y203.367
G1 X180.194 Y203.216
G1 X180.077 Y203.108
G1 X179.942 Y202.993
G1 X179.777 Y202.867
G1 X179.607 Y202.754
G1 X179.428 Y202.655
G1 X179.217 Y202.563
G1 X179.025 Y202.5
G1 X178.832 Y202.456
G1 X178.632 Y202.429
G1 X178.408 Y202.422
G1 X178.256 Y202.43
G1 X178.084 Y202.452
G1 X177.945 Y202.48
G1 X177.781 Y202.528
G1 X177.647 Y202.578
G1 X177.489 Y202.653
G1 X177.343 Y202.739
G1 X177.223 Y202.824
G1 X177.094 Y202.93
G1 X176.987 Y203.032
G1 X176.875 Y203.155
G1 X176.783 Y203.275
G1 X176.701 Y203.4
G1 X176.627 Y203.534
G1 X176.548 Y203.707
G1 X176.496 Y203.852
G1 X176.454 Y203.998
G1 X176.417 Y204.171
G1 X176.391 Y204.357
G1 X176.376 Y204.552
G1 X176.374 Y204.745
G1 X176.383 Y204.937
G1 X176.404 Y205.117
G1 X176.43 Y205.266
G1 X176.463 Y205.408
G1 X176.518 Y205.583
G1 X176.585 Y205.747
G1 X176.653 Y205.885
G1 X176.743 Y206.034
G1 X176.831 Y206.157
G1 X176.936 Y206.283
G1 X177.07 Y206.417
G1 X177.219 Y206.539
G1 X177.371 Y206.641
G1 X177.509 Y206.718
G1 X177.68 Y206.796
G1 X177.835 Y206.853
G1 X178.007 Y206.903
G1 X178.187 Y206.942
G1 X179.075 Y207.07
G1 X179.259 Y205.08
G1 X178.611 Y204.481
G1 X178.635 Y204.495
G1 X178.536 Y204.666
G1 Z.2
G1 E.8 F1800
;TYPE:Inner wall
;WIDTH:0.499962
G1 F1500
G2 X178.565 Y204.716 I-.025 J.047 E.01051
;PATH_TASK id=255 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X178.536 Y204.765 E-.032
G1 X178.479 Y204.765 E-.032
G1 X178.451 Y204.716 E-.032
G1 X178.479 Y204.666 E-.032
G1 X178.536 Y204.666 E-.032
;WIPE_END
G1 Z.6 F24000
G1 X178.635 Y204.495 Z.6
G1 X179.506 Y205.308
G1 X179.914 Y205.863
G1 X180.111 Y206.088
G1 X180.248 Y206.234
G1 X180.381 Y206.367
G1 X180.516 Y206.492
G1 X180.68 Y206.627
G1 X180.833 Y206.738
G1 X180.99 Y206.838
G1 X181.155 Y206.929
G1 X181.371 Y207.026
G1 X181.531 Y207.082
G1 X181.709 Y207.125
G1 X181.887 Y207.148
G1 X182.724 Y207.181
G1 X182.726 Y207.024
G1 X184.314 Y207.814
G1 X184.55 Y208.05
G1 Z.2
G1 E.8 F1800
;TYPE:Outer wall
;WIDTH:0.499999
G1 F1500
G1 X175.45 Y208.05 E.34586
G1 X175.45 Y151.95 E2.13215
G1 X184.55 Y151.95 E.34586
G1 X184.55 Y208.01 E2.13063
;PATH_TASK id=256 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X183.55 Y208.014 E-.16
;WIPE_END
G1 Z.6 F24000
G1 X179.434 Y206.877 Z.6
G1 Z.2
G1 E.8 F1800
;TYPE:Bottom surface
;WIDTH:0.553759
G1 F1500
G1 X179.994 Y207.437 E.03361
;PATH_TASK id=257 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 X180.163 Y207.345 F24000
;TYPE:Gap infill
;WIDTH:0.1678
G1 F1500
G1 X180.191 Y207.315 E.00042
;PATH_TASK id=258 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.209912
G1 X180.218 Y207.285 E.00056
;PATH_TASK id=259 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.252024
G1 X180.246 Y207.256 E.00071
;PATH_TASK id=260 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.294136
G1 X180.273 Y207.226 E.00085
;PATH_TASK id=261 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.336249
G1 X180.301 Y207.196 E.00099
;PATH_TASK id=262 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.372373
G1 X180.328 Y207.166 E.00111
G2 X179.995 Y206.86 I-2.538 J2.426 E.01243
;PATH_TASK id=263 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.350633
G3 X179.621 Y206.477 I15.873 J-15.852 E.01369
;PATH_TASK id=264 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X179.995 Y206.86 E-.16
;WIPE_END
G1 Z.6 F24000
G1 X176.175 Y206.22 Z.6
G1 Z.2
G1 E.8 F1800
;TYPE:Bottom surface
;WIDTH:0.591415
G1 F1500
G1 X177.164 Y207.21 E.06381
G1 X177.159 Y207.229 E.0009
G1 X176.408 Y207.229 E.03426
G1 X176.066 Y206.887 E.02206
;PATH_TASK id=265 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X176.408 Y207.229 E-.07741
G1 X176.924 Y207.229 E-.08259
;WIPE_END
G1 Z.6 F24000
G1 X176.924 Y207.814 Z.6
G1 X184.314 Y207.814
G1 X184.314 Y196.009
G1 X183.934 Y196.009
G1 Z.2
G1 E.8 F1800
;WIDTH:0.51428
G1 F1500
G1 X183.365 Y195.439 E.03158
G1 X183.27 Y195.638 E.00863
G1 X183.045 Y195.786 E.01057
G1 X183.729 Y196.47 E.03789
G1 X183.729 Y197.137 E.02613
G1 X182.571 Y195.979 E.06418
G3 X182.303 Y195.989 I-.165 J-.826 E.01057
G1 X182.296 Y196.37 E.01497
G1 X183.729 Y197.803 E.07941
G1 X183.729 Y198.47 E.02613
G1 X182.285 Y197.026 E.08003
G3 X182.195 Y197.532 I-1.312 J.028 E.02029
G1 X182.166 Y197.574 E.00198
G1 X183.729 Y199.136 E.08661
G1 X183.729 Y199.803 E.02613
G1 X181.857 Y197.931 E.10375
M73 P77 R9
G1 X181.717 Y198.032 E.00677
G1 X181.458 Y198.121 E.01073
G1 X181.387 Y198.128 E.00277
G1 X183.729 Y200.47 E.12978
G1 X183.729 Y201.136 E.02613
G1 X180.722 Y198.129 E.16666
G1 X180.271 Y198.121 E.01767
G1 X180.037 Y198.069 E.00941
G1 X179.96 Y198.034 E.0033
G1 X183.729 Y201.803 E.20889
G1 X183.729 Y202.469 E.02613
G1 X177.613 Y196.354 E.33898
G1 X176.382 Y195.457 E.0597
G1 X176.298 Y195.312 E.00653
G1 X176.264 Y195.322 E.0014
G3 X176.271 Y195.679 I-5.259 J.285 E.01398
G1 X183.934 Y203.342 E.42475
;PATH_TASK id=266 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 X183.17 Y203.244 F24000
G1 F1500
G1 X183.729 Y203.803 E.03095
G1 X183.729 Y204.469 E.02613
G1 X183.361 Y204.102 E.02035
G1 X183.35 Y204.758 E.0257
G1 X183.729 Y205.136 E.02097
G1 X183.729 Y205.802 E.02613
G1 X183.339 Y205.413 E.02158
G1 X183.328 Y206.069 E.0257
G1 X183.729 Y206.469 E.0222
G1 X183.729 Y207.136 E.02613
G1 X183.317 Y206.724 E.02281
G3 X183.289 Y206.967 I-1.147 J-.009 E.0096
G1 X183.143 Y207.216 E.01133
G1 X183.361 Y207.434 E.0121
;PATH_TASK id=267 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X183.143 Y207.216 E-.04939
G1 X183.289 Y206.967 E-.04624
G1 X183.317 Y206.724 E-.03913
G1 X183.429 Y206.836 E-.02524
;WIPE_END
G1 Z.6 F24000
G1 X182.73 Y206.824 Z.6
G1 X182.803 Y202.489
G1 X182.019 Y202.476
G1 X182.025 Y202.099
G1 Z.2
G1 E.8 F1800
G1 F1500
G1 X176.271 Y196.345 E.31892
G1 X176.271 Y197.012 E.02613
G1 X181.155 Y201.896 E.27071
G2 X180.677 Y202.084 I.113 J.989 E.02037
G1 X176.271 Y197.678 E.2442
G1 X176.271 Y198.345 E.02613
G1 X180.386 Y202.46 E.22807
G1 X180.33 Y202.571 E.00489
G2 X179.88 Y202.235 I-2.328 J2.649 E.02202
G1 X179.315 Y201.983 E.02424
G1 X179.204 Y201.945 E.0046
G1 X176.271 Y199.012 E.16257
G1 X176.271 Y199.678 E.02613
G1 X178.425 Y201.836 E.1195
G2 X177.844 Y201.918 I.167 J3.285 E.02302
G1 X176.271 Y200.345 E.0872
G1 X176.271 Y201.011 E.02613
G1 X177.348 Y202.088 E.05967
G1 X177.001 Y202.272 E.01541
G1 X176.923 Y202.33 E.00378
G1 X176.271 Y201.678 E.03615
G1 X176.271 Y202.345 E.02613
G1 X176.718 Y202.791 E.02474
;PATH_TASK id=268 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X176.271 Y202.345 E-.10098
G1 X176.271 Y201.976 E-.05902
;WIPE_END
G1 Z.6 F24000
G1 X179.738 Y197.94 Z.6
G1 Z.2
G1 E.8 F1800
;TYPE:Gap infill
;WIDTH:0.289948
G1 F1500
G1 X179.483 Y197.722 E.0069
;PATH_TASK id=269 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.244641
G1 X179.228 Y197.503 E.00564
;PATH_TASK id=270 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.199333
G1 X178.972 Y197.285 E.00437
;PATH_TASK id=271 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.156952
G1 X178.769 Y197.111 E.00253
;PATH_TASK id=272 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.137224
G1 X178.566 Y196.938 E.00209
;PATH_TASK id=273 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X178.769 Y197.111 E-.16
;WIPE_END
G1 Z.6 F24000
G1 X179.072 Y196.696 Z.6
G1 X180.225 Y197.537
G1 X181.69 Y197.562
G1 X181.714 Y196.163
G1 X184.314 Y195.477
G1 X183.843 Y195.477
G1 Z.2
G1 E.8 F1800
;WIDTH:0.254456
G1 F1500
G1 X183.687 Y195.271 E.00455
;PATH_TASK id=274 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.269626
G1 X183.531 Y195.064 E.00488
;PATH_TASK id=275 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X183.687 Y195.271 E-.16
;WIPE_END
G1 Z.6 F24000
G1 X183.293 Y186.446 Z.6
G1 Z.2
G1 E.8 F1800
;TYPE:Bottom surface
;WIDTH:0.508007
G1 F1500
G1 X183.729 Y186.882 E.0238
G1 X183.729 Y187.539 E.02544
G1 X183.183 Y186.994 E.02983
G3 X182.876 Y187.345 I-1.634 J-1.119 E.01807
G1 X183.729 Y188.197 E.04661
G1 X183.729 Y188.855 E.02544
G1 X182.513 Y187.64 E.06647
G1 X182.401 Y187.714 E.00519
G1 X182.083 Y187.867 E.01366
G1 X183.729 Y189.513 E.08998
G1 X183.729 Y190.17 E.02544
G1 X181.61 Y188.051 E.11589
G1 X181.073 Y188.172 E.02128
G1 X183.729 Y190.828 E.14525
G1 X183.729 Y191.486 E.02544
G1 X180.468 Y188.225 E.17831
G1 X180.342 Y188.236 E.00489
G1 X179.806 Y188.221 E.02076
G1 X183.729 Y192.144 E.21455
G1 X183.729 Y192.801 E.02544
G1 X179.082 Y188.154 E.25414
G3 X178.669 Y188.087 I.199 J-2.519 E.01619
G1 X178.223 Y187.954 E.01799
G1 X183.628 Y193.358 E.29559
G1 X183.575 Y193.595 E.00937
G1 X183.225 Y193.123 E.02275
G1 X182.688 Y192.849 E.02328
G1 X182.452 Y192.84 E.00916
G1 X176.271 Y186.659 E.33801
G1 X176.271 Y187.317 E.02544
G1 X181.091 Y192.137 E.26358
G1 X180.421 Y192.124 E.02592
G1 X176.271 Y187.975 E.22694
G1 X176.271 Y188.633 E.02544
G1 X179.854 Y192.215 E.19593
G1 X179.648 Y192.332 E.00915
G1 X179.482 Y192.501 E.00916
G1 X176.271 Y189.29 E.1756
G1 X176.271 Y189.948 E.02544
G1 X179.1 Y192.777 E.15472
G1 X178.431 Y192.766 E.02588
G1 X176.271 Y190.606 E.11812
G1 X176.271 Y191.264 E.02544
G1 X177.762 Y192.754 E.08153
G1 X177.093 Y192.743 E.02588
G1 X176.271 Y191.921 E.04494
G1 X176.271 Y192.579 E.02544
G1 X176.738 Y193.046 E.02553
;PATH_TASK id=276 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X176.271 Y192.579 E-.10562
G1 X176.271 Y192.239 E-.05438
;WIPE_END
G1 Z.6 F24000
G1 X177.994 Y187.884 Z.6
G1 Z.2
G1 E.8 F1800
;TYPE:Gap infill
;WIDTH:0.239058
G1 F1500
G1 X177.883 Y187.809 E.00218
;PATH_TASK id=277 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.209312
G1 X177.752 Y187.711 E.00227
;PATH_TASK id=278 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.164695
G1 X177.62 Y187.613 E.00166
;PATH_TASK id=279 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.142387
G1 X177.489 Y187.515 E.00136
;PATH_TASK id=280 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 X176.666 Y186.691 F24000
;WIDTH:0.119772
G1 F1500
G1 X176.549 Y186.54 E.00122
;PATH_TASK id=281 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.170409
G3 X176.225 Y186.102 I5.698 J-4.547 E.00578
;PATH_TASK id=282 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X176.549 Y186.54 E-.16
;WIPE_END
G1 Z.6 F24000
G1 X175.686 Y186.54 Z.6
G1 X175.686 Y207.814
G1 X184.314 Y207.814
G1 X184.314 Y177.595
G1 X183.934 Y177.595
G1 Z.2
G1 E.8 F1800
;TYPE:Bottom surface
;WIDTH:0.500504
G1 F1500
G1 X183.511 Y177.172 E.0228
G3 X183.247 Y177.555 I-1.644 J-.846 E.01776
G1 X183.729 Y178.037 E.02591
G1 X183.729 Y178.684 E.02462
G1 X182.923 Y177.878 E.04336
G3 X182.539 Y178.141 I-1.709 J-2.082 E.01773
G1 X183.729 Y179.331 E.06402
G1 X183.729 Y179.978 E.02462
G1 X182.104 Y178.353 E.08745
G3 X181.592 Y178.489 I-.958 J-2.579 E.02016
G1 X183.729 Y180.625 E.11496
G1 X183.729 Y181.272 E.02462
G1 X180.973 Y178.517 E.14828
G1 X180.796 Y178.503 E.00674
G3 X180.238 Y178.375 I.417 J-3.116 E.02184
G1 X180.128 Y178.319 E.00467
G1 X183.729 Y181.919 E.19372
G1 X183.729 Y182.567 E.02462
G1 X179.351 Y178.189 E.23553
G3 X178.78 Y178.265 I-.428 J-1.036 E.02217
G1 X183.729 Y183.214 E.26627
G1 X183.729 Y183.861 E.02462
G1 X178 Y178.133 E.30823
G3 X177.075 Y177.566 I.72 J-2.216 E.04169
G1 X176.775 Y177.214 E.01759
G3 X176.451 Y176.583 I2.412 J-1.635 E.02703
G1 X176.281 Y176.413 E.00918
G1 X176.271 Y176.452 E.00155
G1 X176.271 Y177.051 E.02276
G1 X181.8 Y182.58 E.2975
G1 X181.379 Y182.459 E.01665
G1 X181.003 Y182.429 E.01437
G1 X176.271 Y177.698 E.2546
G1 X176.271 Y178.345 E.02462
G1 X180.375 Y182.449 E.22083
G2 X179.859 Y182.58 I.097 J1.471 E.02038
G1 X176.271 Y178.992 E.19304
G1 X176.271 Y179.639 E.02462
G1 X179.419 Y182.787 E.16939
G1 X179.315 Y182.863 E.00492
G1 X179.031 Y182.672 E.01302
G2 X178.531 Y182.546 I-.532 J1.054 E.01979
G1 X176.271 Y180.286 E.12157
G1 X176.271 Y180.933 E.02462
G1 X177.968 Y182.63 E.09129
G1 X177.83 Y182.656 E.00535
G1 X177.488 Y182.798 E.01406
G1 X176.271 Y181.58 E.06549
G1 X176.271 Y182.228 E.02462
G1 X177.1 Y183.056 E.04457
G1 X177.015 Y183.114 E.00389
G1 X176.762 Y183.366 E.01359
G1 X176.271 Y182.875 E.02643
G1 X176.271 Y183.522 E.02462
G1 X176.644 Y183.894 E.02004
;PATH_TASK id=283 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X176.271 Y183.522 E-.08427
G1 X176.271 Y183.048 E-.07573
;WIPE_END
G1 Z.6 F24000
G1 X182.572 Y183.063 Z.6
G1 Z.2
G1 E.8 F1800
;TYPE:Gap infill
;WIDTH:0.108906
G1 F1500
G1 X182.452 Y182.962 E.00086
;PATH_TASK id=284 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.141195
G1 X182.337 Y182.877 E.00117
;PATH_TASK id=285 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.1827
G1 X182.223 Y182.792 E.00166
;PATH_TASK id=286 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.219878
G1 X182.108 Y182.707 E.0021
G1 X181.965 Y182.75 E.0022
;PATH_TASK id=287 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X182.108 Y182.707 E-.08183
G1 X182.223 Y182.792 E-.07817
;WIPE_END
G1 Z.6 F24000
G1 X183.841 Y184.104 Z.6
G1 Z.2
G1 E.8 F1800
;WIDTH:0.286176
G1 F1500
G1 X183.752 Y184.196 E.00258
;PATH_TASK id=288 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.328535
G1 X183.663 Y184.288 E.00303
G1 X183.589 Y184.216 E.00244
;PATH_TASK id=289 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.26517
G1 X183.52 Y184.119 E.00222
;PATH_TASK id=290 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.224332
G1 X183.451 Y184.021 E.00181
;PATH_TASK id=291 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.182107
G1 X183.377 Y183.916 E.00148
;PATH_TASK id=292 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.145059
G1 X183.271 Y183.786 E.00143
;PATH_TASK id=293 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.129297
G1 X183.165 Y183.656 E.00121
;PATH_TASK id=294 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X183.271 Y183.786 E-.16
;WIPE_END
G1 Z.6 F24000
G1 X183.934 Y171.402 Z.6
G1 Z.2
G1 E.8 F1800
M73 P77 R8
;TYPE:Bottom surface
;WIDTH:0.514676
G1 F1500
G1 X183.405 Y170.873 E.02937
G1 X182.891 Y171.026 E.02105
G1 X183.729 Y171.864 E.04649
G1 X183.729 Y172.531 E.02617
G1 X182.212 Y171.014 E.08415
G3 X181.529 Y170.998 I-.061 J-12.098 E.0268
G1 X183.729 Y173.198 E.12204
G1 X183.729 Y173.865 E.02617
G1 X180.83 Y170.966 E.16082
G1 X180.791 Y170.965 E.00153
G1 X180.783 Y171.523 E.02191
G1 X180.761 Y171.565 E.00186
G1 X182.034 Y172.838 E.07059
G1 X181.548 Y172.717 E.01965
G1 X181.229 Y172.7 E.01252
G1 X180.469 Y171.94 E.04216
G1 X180.248 Y172.089 E.01045
G3 X180.019 Y172.157 I-.274 J-.503 E.00945
G1 X180.626 Y172.764 E.03367
G2 X180.105 Y172.911 I.211 J1.743 E.02129
G1 X179.376 Y172.181 E.04047
G1 X178.707 Y172.18 E.02622
G1 X179.513 Y172.985 E.04466
G1 X179.067 Y172.878 E.01797
G1 X178.746 Y172.886 E.01258
G1 X176.326 Y170.466 E.13426
G2 X176.271 Y171.078 I1.643 J.456 E.02425
G1 X178.154 Y172.961 E.10444
G1 X177.77 Y173.098 E.01599
G1 X177.678 Y173.152 E.00418
G1 X176.271 Y171.745 E.07805
G1 X176.271 Y172.412 E.02617
G1 X177.284 Y173.425 E.05617
G1 X177.205 Y173.481 E.00378
G1 X176.992 Y173.686 E.01161
G1 X176.943 Y173.751 E.00319
G1 X176.271 Y173.08 E.03726
G1 X176.271 Y173.747 E.02617
G1 X176.663 Y174.138 E.02171
G2 X176.444 Y174.586 I2.848 J1.667 E.01959
G1 X176.066 Y174.208 E.02098
;PATH_TASK id=295 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X176.444 Y174.586 E-.08557
G1 X176.556 Y174.336 E-.04388
G1 X176.646 Y174.168 E-.03055
;WIPE_END
G1 Z.6 F24000
G1 X178.511 Y172.043 Z.6
G1 Z.2
G1 E.8 F1800
;TYPE:Gap infill
;WIDTH:0.184102
G1 F1500
G1 X178.399 Y172.09 E.00143
G1 X178.29 Y172.016 E.00154
;PATH_TASK id=296 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.130833
G1 X178.129 Y171.884 E.00152
G1 X177.99 Y171.743 E.00145
G1 X177.863 Y171.584 E.00149
;PATH_TASK id=297 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.182869
G1 X177.793 Y171.486 E.00141
;PATH_TASK id=298 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.222365
G1 X177.722 Y171.387 E.00181
;PATH_TASK id=299 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.261862
G1 X177.652 Y171.289 E.0022
;PATH_TASK id=300 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.30571
G1 X177.504 Y171.107 E.00512
;PATH_TASK id=301 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.353912
G1 X177.356 Y170.925 E.00606
;PATH_TASK id=302 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.382219
G1 X177.155 Y170.718 E.00813
;PATH_TASK id=303 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.365805
G1 X176.996 Y170.589 E.00551
;PATH_TASK id=304 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.308578
G3 X176.484 Y170.107 I2.231 J-2.888 E.01557
G1 X176.426 Y170.063 E.00161
;PATH_TASK id=305 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.305055
G1 X176.37 Y170.109 E.00158
;PATH_TASK id=306 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.271686
G1 X176.314 Y170.156 E.00138
;PATH_TASK id=307 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.255001
G1 X176.258 Y170.202 E.00128
;PATH_TASK id=308 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.69841 F2100
;WIPE_START
G1 F1500
G1 X176.314 Y170.156 E-.10159
;WIPE_END
G1 Z.6 F24000
G1 X176.45 Y174.852 Z.6
G1 Z.2
G1 E.8 F1800
;WIDTH:0.164432
G1 F1500
G1 X176.389 Y174.885 E.0007
;PATH_TASK id=309 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.20467
G1 X176.329 Y174.917 E.00093
G1 X176.191 Y174.738 E.00304
;PATH_TASK id=310 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X176.329 Y174.917 E-.12256
G1 X176.389 Y174.885 E-.03744
;WIPE_END
G1 Z.6 F24000
G1 X176.932 Y175.02 Z.6
G1 X176.969 Y174.872
G1 X177.038 Y174.676
G1 X177.129 Y174.483
G1 X177.239 Y174.303
G1 X177.365 Y174.138
G1 X177.497 Y173.997
G1 X177.657 Y173.856
G1 X177.833 Y173.731
G1 X178.022 Y173.626
G1 X178.222 Y173.544
G1 X178.43 Y173.486
G1 X178.636 Y173.453
G1 X180.955 Y173.283
G1 X181.116 Y173.275
G1 X181.283 Y173.279
G1 X181.468 Y173.297
G1 X181.616 Y173.322
G1 X181.797 Y173.368
G1 X181.974 Y173.43
G1 X182.117 Y173.493
G1 X182.275 Y173.58
G1 X182.432 Y173.685
G1 X182.58 Y173.805
G1 X182.716 Y173.935
G1 X182.841 Y174.075
G1 X182.934 Y174.198
G1 X183.036 Y174.357
G1 X183.109 Y174.494
G1 X183.128 Y174.538
G1 X183.693 Y174.292
G1 Z.2
G1 E.8 F1800
;WIDTH:0.317683
G1 F1500
G1 X183.648 Y174.253 E.00136
;PATH_TASK id=311 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.268981
G1 X183.602 Y174.215 E.00112
;PATH_TASK id=312 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.230786
G1 X183.553 Y174.147 E.0013
;PATH_TASK id=313 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.196141
G1 X183.43 Y173.993 E.00251
;PATH_TASK id=314 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.15291
G1 X183.303 Y173.835 E.00185
;PATH_TASK id=315 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.122684
G1 X183.153 Y173.67 E.00148
G1 X182.828 Y173.353 E.00301
G1 X182.643 Y173.194 E.00162
;PATH_TASK id=316 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.174049
G1 X182.517 Y173.099 E.00172
;PATH_TASK id=317 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.207831
G1 X182.391 Y173.004 E.00217
;PATH_TASK id=318 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.224722
G1 X182.265 Y172.909 E.00239
;PATH_TASK id=319 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X182.391 Y173.004 E-.16
;WIPE_END
G1 Z.6 F24000
G1 X182.122 Y173.496 Z.6
G1 X183.349 Y170.448
G1 X183.382 Y168.463
G1 X183.215 Y168.46
G1 X183.229 Y167.637
G1 Z.2
G1 E.8 F1800
;TYPE:Bottom surface
;WIDTH:0.591415
G1 F1500
G1 X183.936 Y168.344 E.04559
;PATH_TASK id=320 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
M73 P78 R8
;WIPE_START
G1 F1500
G1 X183.229 Y167.637 E-.16
;WIPE_END
G1 Z.6 F24000
G1 X182.951 Y167.384 Z.6
G1 X182.912 Y167.426
G1 X182.764 Y167.56
G1 X182.623 Y167.667
G1 X182.492 Y167.751
G1 X182.356 Y167.826
G1 X182.213 Y167.895
G1 X182.023 Y167.97
G1 X181.868 Y168.021
G1 X181.711 Y168.065
G1 X181.529 Y168.089
G1 X181.36 Y168.106
G1 X181.172 Y168.12
G1 X180.925 Y168.132
G1 X180.74 Y168.137
G1 X180.52 Y168.14
G1 X180.235 Y168.137
G1 X179.855 Y168.127
G1 X179.551 Y168.11
G1 X179.411 Y168.099
G1 X179.183 Y168.078
G1 X178.991 Y168.054
G1 X178.816 Y168.027
G1 X178.669 Y167.989
G1 X178.522 Y167.937
G1 X178.381 Y167.879
G1 X178.215 Y167.799
G1 X178.063 Y167.714
G1 X177.957 Y167.646
G1 X177.824 Y167.549
G1 X177.713 Y167.456
G1 X177.608 Y167.355
G1 X177.486 Y167.22
G1 X177.384 Y167.085
G1 X177.381 Y167.079
G1 X175.686 Y166.953
G1 X176.066 Y166.953
G1 Z.2
G1 E.8 F1800
;WIDTH:0.584068
G1 F1500
G1 X176.988 Y167.875 E.0587
G2 X176.831 Y167.965 I.222 J.576 E.00817
G1 X176.603 Y168.256 E.01663
G1 X176.076 Y167.728 E.03358
;PATH_TASK id=321 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 X177.369 Y167.901 F24000
;TYPE:Gap infill
;WIDTH:0.169048
G1 F1500
G1 X177.335 Y167.797 E.00114
;PATH_TASK id=322 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.121696
G1 X177.311 Y167.758 E.0003
G1 X177.086 Y167.536 E.00207
;PATH_TASK id=323 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.138465
G1 X176.981 Y167.406 E.00133
;PATH_TASK id=324 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.174058
G1 X176.876 Y167.275 E.00182
;PATH_TASK id=325 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.211211
G1 X176.762 Y167.134 E.00254
;PATH_TASK id=326 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.253441
G1 X176.694 Y167.034 E.00211
;PATH_TASK id=327 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.297202
G1 X176.626 Y166.935 E.00255
;PATH_TASK id=328 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.333247
G1 X176.46 Y166.737 E.00621
;PATH_TASK id=329 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.347411
G1 X176.295 Y166.54 E.00652
;PATH_TASK id=330 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X176.46 Y166.737 E-.16
;WIPE_END
G1 Z.6 F24000
G1 X175.686 Y166.737 Z.6
G1 X175.686 Y152.186
G1 X184.314 Y152.186
G1 X184.314 Y153.496
G1 X183.934 Y153.496
G1 Z.2
G1 E.8 F1800
;TYPE:Bottom surface
;WIDTH:0.502988
G1 F1500
G1 X183.21 Y152.771 E.0392
G1 X182.559 Y152.771 E.02489
G1 X183.15 Y153.363 E.03198
G1 X182.494 Y153.357 E.02512
G1 X181.908 Y152.771 E.03166
G1 X181.258 Y152.771 E.02489
G1 X181.877 Y153.391 E.03351
G1 X181.449 Y153.613 E.01846
G1 X180.607 Y152.771 E.04553
G1 X179.957 Y152.771 E.02489
G1 X181.178 Y153.993 E.06609
G1 X181.155 Y154.039 E.00197
G1 X180.744 Y153.724 E.01978
G1 X180.138 Y153.449 E.02549
G1 X179.925 Y153.39 E.00846
G1 X179.306 Y152.771 E.03347
G1 X178.655 Y152.771 E.02489
G1 X179.191 Y153.307 E.02898
G2 X178.626 Y153.392 I.226 J3.411 E.0219
G1 X178.005 Y152.771 E.0336
G1 X177.354 Y152.771 E.02489
G1 X178.15 Y153.567 E.04306
G1 X177.828 Y153.738 E.01396
G1 X177.738 Y153.806 E.0043
G1 X176.703 Y152.771 E.05596
G1 X176.271 Y152.771 E.01653
G1 X176.271 Y152.99 E.00836
G1 X177.396 Y154.115 E.06084
G2 X177.099 Y154.468 I.975 J1.12 E.01774
G1 X176.271 Y153.641 E.04478
G1 X176.271 Y154.291 E.02489
G1 X176.874 Y154.894 E.0326
G2 X176.709 Y155.379 I1.739 J.862 E.01968
G1 X176.271 Y154.942 E.02367
G1 X176.271 Y155.592 E.02489
G1 X176.63 Y155.951 E.0194
G1 X176.647 Y156.619 E.02555
G1 X176.271 Y156.243 E.02032
G1 X176.271 Y156.894 E.02489
G1 X176.936 Y157.558 E.03595
G1 X177.235 Y158.023 E.02115
G1 X177.323 Y158.117 E.00491
G1 X177.191 Y158.147 E.00518
G1 X176.992 Y158.265 E.00883
G1 X176.271 Y157.544 E.039
G1 X176.271 Y158.195 E.02489
G1 X176.751 Y158.674 E.02593
G1 X176.564 Y159.052 E.01613
G1 X176.563 Y159.137 E.00324
G1 X176.271 Y158.846 E.01576
G1 X176.271 Y159.496 E.02489
G1 X176.766 Y159.991 E.02676
;PATH_TASK id=331 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X176.271 Y159.496 E-.11193
G1 X176.271 Y159.196 E-.04807
;WIPE_END
G1 Z.6 F24000
G1 X177.147 Y159.211 Z.6
G1 X177.157 Y158.645
G1 X181.556 Y158.72
G1 X183.435 Y158.863
G1 X183.514 Y160.739
G1 X183.088 Y160.732
G1 X183.081 Y161.101
G1 Z.2
G1 E.8 F1800
G1 F1500
G1 X183.729 Y161.749 E.03502
G1 X183.729 Y162.399 E.02489
G1 X182.639 Y161.31 E.05894
G1 X181.977 Y161.298 E.02533
G1 X183.729 Y163.05 E.09476
G1 X183.729 Y163.7 E.02489
G1 X181.3 Y161.272 E.1314
G1 X180.955 Y161.256 E.01322
G1 X180.947 Y161.57 E.01201
G1 X183.729 Y164.351 E.15047
G1 X183.729 Y164.474 E.0047
G1 X183.695 Y164.483 E.00134
G2 X183.418 Y164.094 I-1.445 J.735 E.01834
G1 X183.063 Y163.767 E.01845
G1 X182.879 Y163.633 E.0087
G1 X182.477 Y163.408 E.01765
G2 X181.95 Y163.223 I-1.133 J2.385 E.02138
G1 X180.785 Y162.058 E.06304
G1 X180.61 Y162.263 E.01031
G3 X180.437 Y162.36 I-.291 J-.314 E.00767
G1 X181.136 Y163.059 E.03783
G1 X180.677 Y163.006 E.01766
G1 X180.431 Y163.005 E.00943
G1 X179.897 Y162.472 E.02886
G1 X179.247 Y162.472 E.02487
G1 X179.779 Y163.004 E.02879
G1 X179.667 Y163.004 E.0043
G1 X179.192 Y163.067 E.01833
G1 X176.271 Y160.147 E.158
G1 X176.271 Y160.798 E.02489
G1 X178.646 Y163.173 E.12849
G1 X178.169 Y163.346 E.01942
G1 X176.271 Y161.448 E.10268
G1 X176.271 Y162.099 E.02489
G1 X177.743 Y163.571 E.07963
G1 X177.427 Y163.775 E.01441
G1 X177.357 Y163.836 E.00352
G1 X176.271 Y162.749 E.05876
G1 X176.271 Y163.4 E.02489
G1 X177.039 Y164.167 E.04151
G2 X176.781 Y164.56 I1.485 J1.255 E.01802
G1 X176.271 Y164.051 E.02756
G1 X176.271 Y164.701 E.02489
G1 X176.746 Y165.176 E.02566
;PATH_TASK id=332 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X176.271 Y164.701 E-.10731
G1 X176.271 Y164.372 E-.05269
;WIPE_END
G1 Z.6 F24000
G1 X181.592 Y163.215 Z.6
G1 Z.2
G1 E.8 F1800
;TYPE:Gap infill
;WIDTH:0.13824
G1 F1500
G1 X181.371 Y163.102 E.00197
;PATH_TASK id=333 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X181.592 Y163.215 E-.16
;WIPE_END
G1 Z.6 F24000
G1 X181.484 Y163.693 Z.6
G1 X181.468 Y163.69
G1 X181.253 Y163.651
G1 X181.003 Y163.618
G1 X180.7 Y163.592
G1 X180.516 Y163.583
G1 X180.237 Y163.576
G1 X180.016 Y163.576
G1 X179.649 Y163.591
G1 X179.479 Y163.605
G1 X179.252 Y163.632
G1 X179.1 Y163.658
G1 X178.929 Y163.696
G1 X178.771 Y163.738
G1 X178.596 Y163.793
G1 X178.427 Y163.857
G1 X178.264 Y163.93
G1 X178.109 Y164.011
G1 X177.977 Y164.09
G1 X177.825 Y164.197
G1 X177.7 Y164.302
G1 X177.585 Y164.415
G1 X177.48 Y164.536
G1 X177.384 Y164.668
G1 X177.285 Y164.832
G1 X177.204 Y164.999
G1 X177.144 Y165.159
G1 X177.1 Y165.312
G1 X177.061 Y165.51
G1 X176.462 Y165.409
G1 Z.2
G1 E.8 F1800
;WIDTH:0.25564
G1 F1500
G1 X176.361 Y165.265 E.00312
;PATH_TASK id=334 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.221884
G1 X176.259 Y165.121 E.00263
;PATH_TASK id=335 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.205006
G1 X176.157 Y164.976 E.00238
;PATH_TASK id=336 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X176.259 Y165.121 E-.16
;WIPE_END
G1 Z.6 F24000
G1 X177.651 Y161.164 Z.6
G1 Z.2
G1 E.8 F1800
;WIDTH:0.101766
G1 F1500
G1 X177.4 Y160.899 E.00178
G1 X177.313 Y160.829 E.00055
;PATH_TASK id=337 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X177.4 Y160.899 E-.03761
G1 X177.651 Y161.164 E-.12239
;WIPE_END
G1 Z.6 F24000
G1 X178.051 Y160.852 Z.6
G1 X177.131 Y160.135
G1 X177.157 Y158.645
G1 X183.441 Y158.533
G1 X183.567 Y157.604
G1 X183.629 Y153.956
G1 X183.629 Y153.956
G1 X183.843 Y153.681
G1 Z.2
G1 E.8 F1800
;WIDTH:0.116887
G1 F1500
G3 X183.753 Y153.678 I-.041 J-.125 E.00057
;PATH_TASK id=338 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.115045
G1 X183.629 Y153.586 E.00092
;PATH_TASK id=339 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.152336
G1 X183.506 Y153.495 E.0014
;PATH_TASK id=340 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.170981
G1 X183.382 Y153.404 E.00163
;PATH_TASK id=341 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X183.506 Y153.495 E-.16
;WIPE_END
G1 Z.6 F24000
G1 X183.498 Y153.954 Z.6
G1 X183.629 Y153.956
G1 X183.512 Y165.909
G1 X183.182 Y185.285
G1 X183.17 Y185.496
G1 X183.141 Y185.702
G1 X183.106 Y185.864
G1 X183.047 Y186.058
G1 X180.44 Y192.71
G1 X180.241 Y195.248
G1 X180.327 Y195.466
G1 X180.121 Y195.629
G1 X180.204 Y195.733
G1 Z.2
G1 E.8 F1800
;TYPE:Outer wall
;WIDTH:0.537621
G1 F1500
G1 X179.09 Y194.931 E.05645
G1 X180.217 Y194.95 E.04637
G1 X180.204 Y195.693 E.03055
;PATH_TASK id=342 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X179.379 Y195.129 E-.16
;WIPE_END
G1 Z.6 F24000
G1 X179.345 Y195.223 Z.6
G1 X179.594 Y193.371
G1 X180.296 Y187.65
G1 X180.514 Y185.511
G1 X180.566 Y185.449
G1 Z.2
G1 E.8 F1800
;TYPE:Inner wall
;WIDTH:0.507805
G1 F1500
G1 X180.483 Y185.388 E.00399
G1 X180.454 Y185.241 E.00577
G1 X180.543 Y185.104 E.00633
;PATH_TASK id=343 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.514484
G1 X180.811 Y185.046 E.01077
G1 X181.153 Y185.121 E.01374
;PATH_TASK id=344 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.512624
G1 X181.246 Y185.271 E.00687
;PATH_TASK id=345 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 X181.176 Y185.399 E.00569
G1 X180.907 Y185.514 E.01142
G1 X180.655 Y185.514 E.00984
;PATH_TASK id=342 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.507805
G1 X180.598 Y185.472 E.00272
;PATH_TASK id=346 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 X180.562 Y185.541 F24000
G1 X180.538 Y185.528
G1 X180.523 Y185.519
G1 X180.264 Y185.865
;TYPE:Outer wall
;WIDTH:0.499999
G1 F1500
G1 X180.059 Y185.639 E.0116
G1 X179.968 Y185.375 E.01061
G1 X179.973 Y185.142 E.00886
G1 X180.08 Y184.881 E.0107
G1 X180.275 Y184.692 E.01031
G1 X180.407 Y184.639 E.00542
G1 X180.738 Y184.565 E.0129
G1 X181.129 Y184.603 E.01491
G1 X181.436 Y184.72 E.01251
G1 X181.665 Y184.991 E.01346
G1 X181.726 Y185.205 E.00847
G1 X181.705 Y185.43 E.00859
G1 X181.559 Y185.72 E.01236
G1 X181.301 Y185.908 E.01214
G1 X180.92 Y186.014 E.015
G1 X180.536 Y185.99 E.01464
G1 X180.3 Y185.881 E.00985
;PATH_TASK id=347 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X180.059 Y185.639 E-.05479
G1 X179.968 Y185.375 E-.04468
G1 X179.973 Y185.142 E-.0373
G1 X180.028 Y185.007 E-.02323
;WIPE_END
G1 Z.6 F24000
G1 X180.415 Y185.161 Z.6
G1 X180.238 Y183.05
G1 X180.788 Y177.916
G1 X181.037 Y175.289
G1 X181.061 Y175.364
G1 Z.2
G1 E.8 F1800
;TYPE:Inner wall
;WIDTH:0.53843
G1 F1500
G1 X181.308 Y175.387 E.01019
G1 X181.392 Y175.554 E.00771
G1 X181.343 Y175.78 E.00954
G1 X181.221 Y175.854 E.00587
G1 X181.011 Y175.842 E.00867
G1 X180.906 Y175.727 E.00641
G1 X180.916 Y175.476 E.01036
G1 X181.03 Y175.388 E.00592
;PATH_TASK id=348 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 X180.993 Y175.305 F24000
G1 X180.989 Y175.307
G1 X180.796 Y174.92
;TYPE:Outer wall
;WIDTH:0.499999
G1 F1500
G1 X181.066 Y174.847 E.01062
G1 X181.368 Y174.889 E.01161
G1 X181.563 Y174.958 E.00784
G1 X181.824 Y175.237 E.01452
G1 X181.89 Y175.57 E.0129
G1 X181.883 Y175.784 E.00814
G1 X181.759 Y176.072 E.01193
G1 X181.611 Y176.224 E.00805
G1 X181.341 Y176.345 E.01125
G1 X181.013 Y176.364 E.01249
G1 X180.757 Y176.283 E.01022
G1 X180.579 Y176.146 E.00852
G1 X180.428 Y175.9 E.01098
G1 X180.383 Y175.59 E.0119
G1 X180.425 Y175.392 E.00769
G1 X180.56 Y175.106 E.01204
G1 X180.765 Y174.945 E.00991
;PATH_TASK id=349 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X181.066 Y174.847 E-.05064
G1 X181.368 Y174.889 E-.04887
G1 X181.563 Y174.958 E-.033
G1 X181.68 Y175.083 E-.02749
;WIPE_END
G1 Z.6 F24000
G1 X181.39 Y175.364 Z.6
G1 X180.895 Y175.382
G1 X178.903 Y175.455
G1 X179.159 Y175.122
G1 Z.2
G1 E.8 F1800
G1 F1500
G1 X179.297 Y175.278 E.00792
G1 X179.364 Y175.518 E.00947
G1 X179.318 Y175.842 E.01245
G1 X179.196 Y176.005 E.00772
G1 X179.02 Y176.105 E.0077
G3 X178.65 Y176.09 I-.15 J-.871 E.01419
G1 X178.484 Y175.984 E.00749
G1 X178.369 Y175.818 E.00765
G1 X178.323 Y175.568 E.00967
G1 X178.39 Y175.276 E.01139
G1 X178.527 Y175.122 E.00784
G1 X178.715 Y175.027 E.00798
G1 X178.957 Y175.031 E.00923
G1 X179.123 Y175.105 E.00689
;PATH_TASK id=350 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X179.297 Y175.278 E-.03927
G1 X179.364 Y175.518 E-.03987
G1 X179.318 Y175.842 E-.05243
G1 X179.212 Y175.985 E-.02844
;WIPE_END
G1 Z.6 F24000
G1 X178.913 Y175.678 Z.6
G1 X179.165 Y173.466
G1 X176.966 Y169.844
G1 X176.992 Y168.354
G1 X179.066 Y168.063
G1 X178.99 Y165.998
G1 X179.027 Y165.941
G1 Z.2
G1 E.8 F1800
;TYPE:Inner wall
;WIDTH:0.516757
G1 F1500
G1 X178.979 Y165.867 E.00347
G1 X179.107 Y165.754 E.0067
G1 X179.696 Y165.648 E.0236
;PATH_TASK id=351 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.535035
G3 X180.814 Y165.662 I-.28 J64.244 E.04574
;PATH_TASK id=352 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.520616
G1 X181.321 Y165.751 E.02043
G1 X181.482 Y165.82 E.00694
G1 X181.566 Y165.926 E.00536
;PATH_TASK id=353 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 X181.386 Y166.05 E.00868
G1 X180.873 Y166.139 E.02066
;PATH_TASK id=354 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.535035
G1 X180.26 Y166.145 E.02508
G1 X179.496 Y166.086 E.03139
;PATH_TASK id=350 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
;WIDTH:0.516757
G1 X179.058 Y165.962 E.01793
;PATH_TASK id=355 conformal=0 surface=-1 source_layer=0 shell_offset=-1.000000
G1 X179.028 Y166.019 F24000
G1 X178.941 Y165.959
G1 X178.932 Y165.948
G1 X178.594 Y166.218
;TYPE:Outer wall
;WIDTH:0.499999
G1 F1500
G1 X178.501 Y166.032 E.00791
G1 X178.488 Y165.795 E.00903
G1 X178.56 Y165.593 E.00816
G1 X178.806 Y165.361 E.01283
G1 X179.152 Y165.244 E.01389
G1 X179.663 Y165.162 E.01967
G3 X180.98 Y165.193 I.401 J10.976 E.05013
G1 X181.566 Y165.32 E.02275
G1 X181.851 Y165.49 E.01262
G1 X182.006 Y165.691 E.00965
G1 X182.056 Y166.021 E.0127
G1 X181.972 Y166.22 E.00821
G1 X181.715 Y166.434 E.01269
G1 X181.396 Y166.55 E.01292
G1 X180.824 Y166.629 E.02195
G1 X179.878 Y166.619 E.03592
G1 X179.187 Y166.525 E.02653
G1 X178.872 Y166.415 E.0127
G1 X178.627 Y166.242 E.01139
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
M106 S127
;LAYER_CHANGE
;Z:0.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;0.4
G1 E-.64 F2100
;WIPE_START
G1 F1500
G1 X178.501 Y166.032 E-.03907
G1 X178.488 Y165.795 E-.03803
G1 X178.56 Y165.593 E-.03436
G1 X178.781 Y165.385 E-.04853
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;0.4
;_SET_FAN_SPEED_CHANGING_LAYER
M204 P2500
M104 S210 ; set nozzle temperature
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=356 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
M486 S0
G1 Z.8 F24000
G1 X178.985 Y165.666 Z.8
G1 X177.524 Y164.603
G1 X177.513 Y164.595
G1 Z.4
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F10200
G1 X177.281 Y164.918 E.01346
;PATH_TASK id=357 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X177.155 Y165.244 E.01181
G1 X177.07 Y165.805 E.01921
G1 X177.113 Y166.342 E.01824
G1 X177.287 Y166.848 E.01811
G1 X177.436 Y167.077 E.00923
G1 X177.798 Y167.481 E.01836
G1 X178.291 Y167.798 E.01984
G1 X178.866 Y168.012 E.02078
G1 X179.159 Y168.055 E.01002
;PATH_TASK id=358 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.424627
G1 X179.452 Y168.097 E.00939
;PATH_TASK id=359 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.399255
G1 X180.264 Y168.141 E.02408
;PATH_TASK id=360 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.401368
G1 X181.01 Y168.123 E.02226
;PATH_TASK id=356 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.449999
G1 X181.764 Y168.015 E.02577
G1 X182.273 Y167.828 E.01835
G1 X182.493 Y167.697 E.0087
G1 X182.949 Y167.334 E.0197
G1 X183.279 Y166.839 E.02013
G1 X183.45 Y166.26 E.02044
G1 X183.459 Y165.62 E.02165
G1 X183.296 Y165.02 E.02104
G1 X182.973 Y164.522 E.0201
G1 X182.553 Y164.157 E.01885
G1 X182.079 Y163.908 E.01811
G1 X181.423 Y163.715 E.02316
G1 X180.656 Y163.623 E.02614
G1 X179.601 Y163.628 E.03574
G1 X178.879 Y163.744 E.02475
G1 X178.178 Y164.019 E.02549
G1 X177.652 Y164.402 E.02204
G1 X177.536 Y164.563 E.00669
;PATH_TASK id=361 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
M204 T2500
G1 X177.548 Y164.573 F24000
G1 X177.539 Y164.583
G1 X177.446 Y164.71
G1 X177.351 Y164.868
G1 X177.333 Y164.904
G1 X177.681 Y165.073
M204 P2500
;TYPE:Outer wall
G1 F10200
G1 X177.555 Y165.398 E.01181
G1 X177.496 Y165.855 E.01559
G1 X177.539 Y166.296 E.015
G1 X177.687 Y166.693 E.01435
G1 X178.001 Y167.092 E.01718
G1 X178.41 Y167.379 E.01692
G1 X178.919 Y167.583 E.01855
G1 X179.457 Y167.692 E.0186
G1 X180.233 Y167.747 E.02633
G1 X180.922 Y167.727 E.02335
G1 X181.582 Y167.621 E.02261
G1 X182.125 Y167.426 E.01952
G1 X182.564 Y167.119 E.01815
G1 X182.847 Y166.752 E.01568
G1 X183.019 Y166.263 E.01755
G1 X183.044 Y165.76 E.01705
G1 X182.948 Y165.29 E.01623
G1 X182.717 Y164.879 E.01595
G1 X182.378 Y164.556 E.01584
G1 X181.989 Y164.333 E.01519
G1 X181.393 Y164.146 E.02112
G1 X180.679 Y164.053 E.0244
G1 X179.662 Y164.052 E.03441
G1 X179.021 Y164.148 E.02195
G1 X178.413 Y164.377 E.02199
G1 X177.989 Y164.666 E.01736
G1 X177.705 Y165.041 E.01591
;PATH_TASK id=362 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X177.555 Y165.398 E-.062
G1 X177.496 Y165.855 E-.07369
G1 X177.511 Y166.006 E-.02431
;WIPE_END
G1 Z.8 F24000
G1 X177.114 Y166.02 Z.8
G1 X177.065 Y168.43
G1 X177.042 Y169.801
G1 X178.505 Y171.518
G1 X180.388 Y171.55
G1 X180.005 Y170.069
G1 X180.061 Y170.094
G1 X179.942 Y170.358
G1 Z.4
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
G1 F10200
G1 X182.527 Y170.402 E.08748
G1 X182.951 Y170.358 E.01443
G1 X183.202 Y170.165 E.01074
G1 X183.327 Y169.805 E.01292
G1 X183.339 Y169.105 E.02369
G1 X183.262 Y168.796 E.01077
G1 X183.072 Y168.589 E.00952
G1 X182.739 Y168.484 E.0118
G2 X181.309 Y168.473 I-.862 J19.567 E.04842
;PATH_TASK id=363 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.42286
G1 X180.938 Y168.48 E.01174
;PATH_TASK id=364 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.395721
G1 X180.23 Y168.477 E.02075
;PATH_TASK id=365 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.404823
G1 X179.34 Y168.449 E.02679
;PATH_TASK id=366 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.449999
G1 X178.823 Y168.417 E.01753
G1 X177.563 Y168.4 E.04265
G1 X177.258 Y168.518 E.01107
G1 X177.087 Y168.715 E.00883
G1 X177.013 Y168.997 E.00988
G1 X177.005 Y169.461 E.0157
G1 X177.081 Y169.766 E.01065
G1 X177.268 Y169.973 E.00944
G1 X177.675 Y170.293 E.01753
G1 X178.022 Y170.705 E.01825
;PATH_TASK id=362 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X178.314 Y171.225 E.02018
G1 X178.512 Y171.457 E.01031
G1 X178.78 Y171.562 E.00977
G1 X179.537 Y171.579 E.02561
G1 X179.794 Y171.527 E.00888
G1 X180.001 Y171.377 E.00863
G1 X180.097 Y171.233 E.00588
G1 X180.104 Y170.718 E.01744
G1 X179.959 Y170.394 E.01202
;PATH_TASK id=367 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
M204 T2500
G1 X179.757 Y170.597 F24000
G1 X179.613 Y170.454
G1 X179.228 Y170.14
G1 X179.332 Y170.042
G1 X179.214 Y169.917
M204 P2500
;TYPE:Outer wall
G1 F10200
G1 X181.931 Y169.963 E.09198
G1 X182.787 Y169.962 E.02895
G1 X182.896 Y169.826 E.00593
G1 X182.911 Y169.098 E.02465
G1 X182.831 Y168.944 E.00587
G1 X182.732 Y168.912 E.00352
G1 X177.626 Y168.826 E.17284
G1 X177.514 Y168.862 E.00398
G1 X177.441 Y169.004 E.00543
G1 X177.456 Y169.559 E.01878
G3 X177.993 Y170.005 I-3.576 J4.852 E.02364
G1 X178.385 Y170.478 E.02079
G1 X178.723 Y171.074 E.0232
G1 X178.838 Y171.137 E.00443
G1 X179.544 Y171.15 E.02392
G1 X179.683 Y171.09 E.0051
G1 X179.713 Y170.894 E.00673
G1 X179.446 Y170.298 E.0221
G1 X179.235 Y169.951 E.01374
;PATH_TASK id=368 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X180.235 Y169.955 E-.16
;WIPE_END
G1 Z.8 F24000
G1 X180.154 Y170.136 Z.8
G1 X182.873 Y174.241
G1 X182.971 Y174.395
G1 X183.041 Y174.526
G1 X183.114 Y174.694
G1 X183.163 Y174.835
G1 X183.211 Y175.017
G1 X183.245 Y175.203
G1 X183.262 Y175.353
G1 X183.271 Y175.545
G1 X183.269 Y175.717
G1 X183.253 Y175.921
G1 X183.228 Y176.097
G1 X183.181 Y176.305
G1 X183.13 Y176.464
G1 X183.072 Y176.613
G1 X182.995 Y176.77
G1 X182.905 Y176.921
G1 X182.803 Y177.064
G1 X182.688 Y177.198
G1 X182.567 Y177.318
G1 X182.423 Y177.44
G1 X182.242 Y177.564
G1 X182.115 Y177.636
G1 X181.991 Y177.695
G1 X181.862 Y177.745
G1 X181.724 Y177.789
G1 X181.512 Y177.836
G1 X181.367 Y177.855
G1 X181.221 Y177.865
G1 X180.97 Y177.862
G1 X180.727 Y177.833
G1 X180.504 Y177.78
G1 X180.382 Y177.739
G1 X180.265 Y177.691
G1 X180.079 Y177.592
G1 X179.972 Y177.521
G1 X179.863 Y177.436
G1 X179.776 Y177.393
G1 Z.4
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
G1 F10200
G1 X180.013 Y177.599 E.01067
G1 X180.511 Y177.826 E.01851
G1 X181.036 Y177.905 E.01795
G1 X181.604 Y177.856 E.01931
G1 X182.205 Y177.63 E.02175
G1 X182.648 Y177.295 E.01879
G1 X182.987 Y176.859 E.01871
G1 X183.236 Y176.247 E.02234
G1 X183.31 Y175.643 E.0206
G1 X183.226 Y174.921 E.02459
G1 X182.967 Y174.313 E.02237
G1 X182.636 Y173.905 E.01779
G1 X182.189 Y173.572 E.01888
G1 X181.695 Y173.379 E.01795
G1 X181.042 Y173.315 E.02221
G1 X180.507 Y173.403 E.01836
G1 X180.036 Y173.635 E.01775
G1 X179.839 Y173.792 E.00853
G1 X179.589 Y173.629 E.0101
G1 X179.004 Y173.485 E.02039
G1 X178.796 Y173.481 E.00706
G1 X178.226 Y173.578 E.01957
G1 X177.762 Y173.825 E.01778
G1 X177.324 Y174.249 E.02063
G1 X177.218 Y174.406 E.0064
G1 X176.982 Y174.961 E.02042
G1 X176.903 Y175.506 E.01866
G1 X176.957 Y176.129 E.02116
G1 X177.167 Y176.678 E.0199
G1 X177.52 Y177.139 E.01963
G1 X178.018 Y177.483 E.02051
G1 X178.521 Y177.641 E.01785
G1 X179.054 Y177.657 E.01805
G1 X179.544 Y177.523 E.01717
G1 X179.741 Y177.412 E.00765
;PATH_TASK id=369 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
M204 T2500
G1 X179.626 Y177.444 F24000
G1 X179.626 Y177.444
G1 X179.621 Y176.794
G1 X179.813 Y176.732
G1 X179.829 Y176.78
M204 P2500
;TYPE:Outer wall
G1 F10200
G1 X179.89 Y176.893 E.00433
G1 X180.248 Y177.239 E.01688
G1 X180.587 Y177.4 E.01268
G1 X180.882 Y177.457 E.0102
G1 X181.431 Y177.458 E.01856
G1 X181.911 Y177.304 E.01706
G1 X182.288 Y177.048 E.01543
G1 X182.568 Y176.728 E.01442
G1 X182.798 Y176.231 E.01851
G1 X182.881 Y175.719 E.01755
G1 X182.838 Y175.125 E.02016
G1 X182.65 Y174.616 E.01836
G1 X182.398 Y174.271 E.01447
G1 X182.056 Y173.988 E.01505
G1 X181.686 Y173.818 E.01378
G1 X181.174 Y173.74 E.01751
G1 X180.666 Y173.804 E.01735
G1 X180.218 Y174.024 E.01687
G1 X179.859 Y174.402 E.01765
G1 X179.778 Y174.282 E.0049
G1 X179.397 Y174.013 E.0158
G1 X178.922 Y173.906 E.01648
G1 X178.404 Y173.973 E.01767
G1 X177.969 Y174.2 E.0166
G1 X177.637 Y174.542 E.01615
G1 X177.42 Y174.979 E.0165
G1 X177.331 Y175.506 E.0181
G1 X177.377 Y176.039 E.01811
G1 X177.563 Y176.515 E.0173
G1 X177.846 Y176.861 E.0151
G1 X178.245 Y177.12 E.01611
G1 X178.627 Y177.225 E.0134
G1 X179.012 Y177.23 E.01306
G1 X179.435 Y177.107 E.01491
G1 X179.798 Y176.806 E.01595
;PATH_TASK id=370 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X179.89 Y176.893 E-.02023
G1 X180.248 Y177.239 E-.07977
G1 X180.587 Y177.4 E-.05994
G1 X180.587 Y177.4 E-.00006
;WIPE_END
G1 Z.8 F24000
G1 X180.463 Y177.766 Z.8
G1 X178.667 Y183.231
G1 X178.722 Y183.086
G1 Z.4
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
G1 F10200
G1 X178.564 Y183.085 E.00534
G1 X177.909 Y183.263 E.02297
G1 X177.391 Y183.599 E.0209
G1 X177.004 Y184.087 E.0211
G1 X176.791 Y184.667 E.02089
G1 X176.746 Y185.312 E.02189
G1 X176.865 Y185.933 E.0214
G1 X177.169 Y186.514 E.0222
G1 X177.615 Y186.965 E.02147
G1 X178.087 Y187.246 E.01862
G1 X178.726 Y187.466 E.02286
G1 X179.508 Y187.593 E.02681
G1 X180.389 Y187.616 E.02983
G1 X181.09 Y187.537 E.02387
G1 X181.649 Y187.393 E.01955
G1 X182.284 Y187.047 E.02447
G1 X182.721 Y186.597 E.02124
G1 X182.982 Y186.127 E.0182
G1 X183.117 Y185.628 E.01749
G1 X183.139 Y185.049 E.01962
G1 X183.035 Y184.531 E.0179
G1 X182.78 Y184.017 E.01942
G1 X182.34 Y183.548 E.02175
G1 X181.749 Y183.211 E.02303
G1 X181.191 Y183.056 E.01962
G1 X180.685 Y183.028 E.01714
G1 X180.093 Y183.112 E.02024
G1 X179.583 Y183.331 E.01879
G1 X179.283 Y183.55 E.01255
G2 X179.131 Y183.247 I-.474 J.048 E.01172
G1 X178.849 Y183.087 E.01097
G1 X178.762 Y183.086 E.00296
;PATH_TASK id=371 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
M204 T2500
G1 X178.702 Y183.244 F24000
G1 X178.784 Y183.275
G1 X178.7 Y183.498
M204 P2500
;TYPE:Outer wall
G1 F10200
G1 X178.174 Y183.614 E.01823
G1 X177.758 Y183.846 E.01614
G1 X177.431 Y184.202 E.01638
G1 X177.23 Y184.656 E.01681
G1 X177.168 Y185.203 E.01861
G1 X177.238 Y185.705 E.01716
G1 X177.452 Y186.176 E.01751
G1 X177.807 Y186.572 E.01801
G1 X178.198 Y186.826 E.01577
G1 X178.762 Y187.035 E.02037
G1 X179.537 Y187.165 E.02659
G1 X180.334 Y187.189 E.02698
G1 X180.865 Y187.147 E.01803
G1 X181.419 Y187.023 E.01921
G1 X181.941 Y186.771 E.01963
G1 X182.324 Y186.414 E.01772
G1 X182.554 Y186.043 E.01478
G1 X182.682 Y185.642 E.01426
G1 X182.719 Y185.16 E.01635
G1 X182.656 Y184.748 E.01411
G1 X182.454 Y184.296 E.01676
G1 X182.115 Y183.913 E.01729
G1 X181.633 Y183.624 E.01904
G1 X181.115 Y183.478 E.01821
G1 X180.773 Y183.452 E.01159
G1 X180.228 Y183.519 E.01859
G1 X179.755 Y183.723 E.01745
G1 X179.412 Y184 E.01491
;PATH_TASK id=372 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.493713
G1 F9982.417
G1 X179.274 Y184.152 E.00768
;PATH_TASK id=373 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.537427
G1 F9099.984
G1 X179.137 Y184.304 E.00843
;PATH_TASK id=374 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.58114
G1 F8360.893
G1 X178.999 Y184.456 E.00917
;PATH_TASK id=375 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X178.989 Y184.359 E.00438
;PATH_TASK id=376 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.546853
G1 F8929.758
G1 X178.936 Y184.014 E.01463
;PATH_TASK id=377 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.498426
G1 F9879.123
G1 X178.882 Y183.669 E.01322
;PATH_TASK id=371 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.449999
G1 F10200
G1 X178.829 Y183.551 E.00438
G1 X178.737 Y183.513 E.00336
;PATH_TASK id=378 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X178.174 Y183.614 E-.0915
G1 X177.8 Y183.822 E-.0685
;WIPE_END
G1 Z.8 F24000
G1 X177.565 Y183.507 Z.8
G1 X177.615 Y183.469
G1 X177.723 Y183.401
G1 X177.861 Y183.326
G1 X178.009 Y183.262
G1 X178.159 Y183.21
G1 X178.281 Y183.177
G1 X178.437 Y183.144
G1 X178.972 Y183.346
G1 X178.92 Y184.019
G1 X178.755 Y185.956
G1 X179.366 Y185.959
G1 X179.303 Y185.91
G1 X179.199 Y186.04
G1 Z.4
G1 E.8 F1800
G1 F10200
G1 X179.025 Y186.036 E.00591
G1 X178.626 Y185.884 E.01446
G1 X178.373 Y185.703 E.01052
G1 X178.206 Y185.482 E.00937
G1 X178.136 Y185.245 E.00836
G1 X178.18 Y184.925 E.01092
G1 X178.337 Y184.723 E.00868
;PATH_TASK id=379 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.463313
G1 X178.715 Y184.577 E.01415
;PATH_TASK id=380 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.503938
G1 F9761.02
G1 X178.805 Y184.55 E.0036
;PATH_TASK id=381 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.544562
G1 F8970.547
G1 X178.895 Y184.523 E.00392
;PATH_TASK id=382 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.585186
G1 F8298.51
G1 X178.985 Y184.496 E.00424
G1 X178.974 Y184.731 E.01061
;PATH_TASK id=383 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.540124
G1 F9050.617
G1 X178.963 Y184.966 E.00973
;PATH_TASK id=384 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.495062
G1 F9952.64
G1 X178.952 Y185.201 E.00885
;PATH_TASK id=378 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.449999
G1 F10200
G1 X179.006 Y185.562 E.01233
G1 X179.184 Y186.003 E.01612
;PATH_TASK id=385 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X179.025 Y186.036 E-.02606
G1 X178.626 Y185.884 E-.06835
G1 X178.373 Y185.703 E-.04974
G1 X178.313 Y185.623 E-.01585
;WIPE_END
G1 Z.8 F24000
G1 X178.45 Y185.558 Z.8
G1 X178.454 Y185.554
G1 X178.38 Y185.165
G1 X178.382 Y185.134
G1 X178.565 Y185.144
G1 Z.4
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.413526
G1 F10200
G1 X178.495 Y185.185 E.00247
G1 X178.565 Y185.225 E.00247
G1 X178.588 Y185.185 E.00143
;PATH_TASK id=386 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 E-.75742 F2100
;WIPE_START
G1 F10200
G1 X178.565 Y185.225 E-.00954
G1 X178.495 Y185.185 E-.01652
G1 X178.565 Y185.144 E-.01652
;WIPE_END
G1 Z.8 F24000
G1 X178.382 Y185.134 Z.8
G1 X178.87 Y184.468
G1 X178.92 Y184.019
G1 X178.972 Y183.346
G1 X178.437 Y183.144
G1 X178.281 Y183.177
G1 X178.159 Y183.21
G1 X178.009 Y183.262
G1 X177.861 Y183.326
G1 X177.723 Y183.401
G1 X177.615 Y183.469
G1 X177.487 Y183.565
G1 X177.34 Y183.699
G1 X177.197 Y183.862
G1 X177.085 Y184.021
G1 X176.99 Y184.192
G1 X176.908 Y184.387
G1 X176.847 Y184.589
G1 X176.809 Y184.779
G1 X176.785 Y184.997
G1 X176.781 Y185.235
G1 X176.795 Y185.439
G1 X176.825 Y185.638
G1 X176.871 Y185.828
G1 X176.911 Y185.952
G1 X176.958 Y186.073
G1 X177.043 Y186.247
G1 X177.146 Y186.418
G1 X177.264 Y186.574
G1 X177.366 Y186.689
G1 X177.473 Y186.795
G1 X177.584 Y186.89
G1 X177.702 Y186.979
G1 X177.83 Y187.064
G1 X177.929 Y187.121
G1 X178.047 Y187.183
G1 X178.222 Y187.262
G1 X178.358 Y187.314
G1 X178.517 Y187.367
G1 X178.683 Y187.414
G1 X178.887 Y187.461
G1 X179.226 Y187.519
G1 X179.301 Y187.527
G1 X180.915 Y192.793
G1 X180.916 Y192.753
G1 Z.4
G1 E.8 F1800
;WIDTH:0.449999
G1 F10200
G1 X180.554 Y192.744 E.01224
G1 X180.245 Y192.786 E.01058
G1 X179.99 Y192.976 E.01076
G1 X179.858 Y193.408 E.01527
G1 X177.229 Y193.363 E.089
G1 X176.995 Y193.405 E.00805
G1 X176.738 Y193.597 E.01086
G1 X176.608 Y193.963 E.01314
G1 X176.608 Y194.646 E.0231
G1 X176.849 Y195.033 E.01546
G1 X180.134 Y197.431 E.13766
G1 X180.429 Y197.508 E.01031
G1 X181.204 Y197.501 E.02624
G1 X181.503 Y197.327 E.01173
G1 X181.621 Y197.146 E.0073
G1 X181.669 Y196.919 E.00786
G1 X181.695 Y195.36 E.05276
G1 X182.282 Y195.37 E.01985
G1 X182.518 Y195.327 E.00811
G1 X182.774 Y195.135 E.01084
G1 X182.903 Y194.77 E.0131
G1 X182.915 Y194.071 E.02369
G1 X182.835 Y193.759 E.01088
G1 X182.642 Y193.552 E.00959
G1 X182.387 Y193.455 E.00925
G1 X181.728 Y193.44 E.02231
G1 X181.646 Y193.058 E.01322
G1 X181.399 Y192.822 E.01157
G1 X181.204 Y192.76 E.00693
G1 X180.956 Y192.754 E.00839
;PATH_TASK id=387 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
M204 T2500
G1 X180.955 Y192.794 F24000
G1 X180.553 Y192.787
G1 X180.547 Y193.173
M204 P2500
;TYPE:Outer wall
G1 F10200
G1 X180.372 Y193.2 E.00601
G1 X180.288 Y193.35 E.00581
G1 X180.28 Y193.844 E.0167
G1 X177.222 Y193.792 E.10351
G1 X177.076 Y193.861 E.00549
G1 X177.037 Y193.971 E.00392
G1 X177.027 Y194.537 E.01918
G1 X177.102 Y194.687 E.00568
G1 X180.332 Y197.045 E.13535
G1 X180.436 Y197.08 E.00372
G1 X181.146 Y197.068 E.02404
G1 X181.238 Y196.94 E.00532
G1 X181.274 Y194.925 E.06822
G1 X182.289 Y194.942 E.03436
G1 X182.436 Y194.872 E.0055
G1 X182.474 Y194.763 E.00391
G1 X182.462 Y193.97 E.02683
G1 X182.342 Y193.882 E.00505
G1 X181.292 Y193.861 E.03555
G1 X181.276 Y193.273 E.0199
G1 X181.15 Y193.185 E.0052
G1 X180.587 Y193.174 E.01906
;PATH_TASK id=388 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X180.372 Y193.2 E-.03472
G1 X180.288 Y193.35 E-.02748
G1 X180.28 Y193.844 E-.07892
G1 X180.162 Y193.842 E-.01888
;WIPE_END
G1 Z.8 F24000
G1 X179.901 Y193.451 Z.8
G1 X179.912 Y192.776
G1 X181.696 Y192.807
G1 X182.881 Y193.502
G1 X182.65 Y207.103
G1 X182.067 Y207.08
G1 X182.063 Y207.187
G1 Z.4
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.636044
G1 F7586.947
G1 X182.212 Y207.196 E.00735
;PATH_TASK id=389 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.615331
G1 F7861.484
G1 X182.272 Y207.148 E.00365
;PATH_TASK id=390 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.573998
G1 F8473.332
G1 X182.332 Y207.101 E.00339
;PATH_TASK id=391 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.532665
G1 F9188.455
G1 X182.392 Y207.053 E.00312
;PATH_TASK id=392 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.491332
G1 F10035.413
G1 X182.453 Y207.006 E.00286
;PATH_TASK id=393 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.449999
G1 F10200
G1 X182.67 Y206.709 E.01245
G1 X182.703 Y206.523 E.00638
G1 X182.76 Y203.131 E.11483
G1 X182.646 Y202.765 E.01301
G1 X182.396 Y202.562 E.01089
G1 X182.16 Y202.51 E.00816
G1 X181.484 Y202.499 E.02288
G1 X181.266 Y202.535 E.00749
G1 X181.009 Y202.714 E.01061
G1 X180.864 Y203.086 E.01351
G1 X180.849 Y203.981 E.0303
G2 X180.272 Y203.34 I-8.771 J7.313 E.02918
G1 X179.696 Y202.854 E.0255
G1 X179.125 Y202.569 E.02162
G1 X178.556 Y202.46 E.0196
G1 X177.915 Y202.531 E.02183
G1 X177.697 Y202.599 E.00772
G1 X177.176 Y202.909 E.02054
G1 X176.76 Y203.377 E.02118
G1 X176.506 Y203.948 E.02115
G1 X176.408 Y204.579 E.02163
G1 X176.458 Y205.242 E.02248
G1 X176.642 Y205.781 E.0193
G1 X177.022 Y206.317 E.02221
G1 X177.49 Y206.667 E.01981
G1 X178.117 Y206.891 E.02252
G1 X178.515 Y206.95 E.01364
G1 X178.828 Y206.864 E.01098
G1 X179.064 Y206.609 E.01175
G1 X179.122 Y206.412 E.00694
G1 X179.208 Y205.695 E.02444
;PATH_TASK id=394 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X179.143 Y205.495 E.00713
;PATH_TASK id=395 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.419081
G1 X179.079 Y205.294 E.00659
;PATH_TASK id=396 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.424165
G1 X178.893 Y205.155 E.00738
;PATH_TASK id=397 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.460166
G1 X178.706 Y205.016 E.00807
;PATH_TASK id=398 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.488705
G1 F10094.552
G1 X178.549 Y204.974 E.00602
;PATH_TASK id=399 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.517244
G1 F9487.187
G1 X178.392 Y204.933 E.00641
G1 X178.294 Y204.845 E.0052
G1 X178.283 Y204.562 E.01116
G1 X178.374 Y204.453 E.00563
G1 X178.537 Y204.465 E.00644
G1 X178.714 Y204.564 E.008
;PATH_TASK id=400 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.488705
G1 F10094.552
G1 X178.891 Y204.664 E.00752
;PATH_TASK id=401 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.460166
G1 F10200
G1 X179.144 Y204.901 E.01204
;PATH_TASK id=402 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.427019
G1 X179.397 Y205.139 E.01108
;PATH_TASK id=403 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.421935
G1 X179.677 Y205.501 E.01444
;PATH_TASK id=404 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.449999
G1 X179.958 Y205.863 E.01551
G1 X180.452 Y206.386 E.02437
G1 X181.065 Y206.841 E.02582
;PATH_TASK id=405 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.496511
G1 F9920.848
G1 X181.205 Y206.921 E.00608
;PATH_TASK id=406 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.543022
G1 F8998.174
G1 X181.344 Y207.002 E.0067
;PATH_TASK id=407 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.589533
G1 F8232.519
G1 X181.484 Y207.082 E.00733
;PATH_TASK id=388 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.636044
G1 F7586.947
G1 X181.624 Y207.163 E.00795
G1 X182.023 Y207.185 E.01973
;PATH_TASK id=408 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
M204 T2500
G1 X182.027 Y207.079 F24000
G1 X182.054 Y207.08
G1 X182.069 Y206.693
M204 P2500
;TYPE:Outer wall
;WIDTH:0.449999
G1 F10200
G1 X182.2 Y206.66 E.00456
G1 X182.271 Y206.544 E.0046
G1 X182.332 Y203.124 E.11579
G1 X182.298 Y203.015 E.00388
G1 X182.223 Y202.954 E.00325
G2 X181.38 Y202.953 I-.425 J4.044 E.02859
G1 X181.292 Y203.102 E.00585
G1 X181.258 Y205.129 E.06862
G2 X180.004 Y203.677 I-23.082 J18.652 E.06496
G1 X179.525 Y203.254 E.02164
G1 X179.075 Y203.004 E.01739
G1 X178.595 Y202.889 E.01671
G1 X177.963 Y202.957 E.02152
G1 X177.527 Y203.175 E.01651
G1 X177.144 Y203.567 E.01855
G1 X176.929 Y204.019 E.01694
G1 X176.839 Y204.549 E.01819
G1 X176.878 Y205.149 E.02037
G1 X177.045 Y205.637 E.01744
G1 X177.359 Y206.053 E.01763
G1 X177.729 Y206.311 E.01526
G1 X178.246 Y206.482 E.01845
G1 X178.489 Y206.52 E.00834
G1 X178.609 Y206.496 E.00412
G1 X178.696 Y206.361 E.00544
G1 X178.782 Y205.644 E.02444
G1 X178.76 Y205.533 E.00384
G1 X178.632 Y205.443 E.00528
G1 X178.219 Y205.372 E.0142
G1 X177.982 Y205.217 E.00957
G1 X177.867 Y205.048 E.00693
G1 X177.797 Y204.751 E.01033
G1 X177.833 Y204.419 E.01131
G1 X177.965 Y204.183 E.00911
G1 X178.181 Y204.02 E.00918
G1 X178.445 Y203.968 E.00913
G1 X178.754 Y204.041 E.01074
G1 X179.104 Y204.263 E.01403
G1 X179.629 Y204.797 E.02533
G1 X180.265 Y205.564 E.03375
G1 X180.693 Y206.028 E.02135
G1 X181.206 Y206.429 E.02206
G1 X181.637 Y206.63 E.01609
G1 X182.03 Y206.688 E.01343
;PATH_TASK id=409 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X182.2 Y206.66 E-.02757
G1 X182.271 Y206.544 E-.02176
G1 X182.284 Y205.853 E-.11067
;WIPE_END
G1 Z.8 F24000
G1 X182.671 Y205.859 Z.8
G1 X183.107 Y185.284
G1 X183.437 Y165.909
G1 X183.429 Y165.706
G1 X183.404 Y165.507
G1 X183.362 Y165.313
G1 X183.3 Y165.125
G1 X183.22 Y164.944
G1 X183.119 Y164.772
G1 X180.171 Y160.36
G1 X180.226 Y160.385
G1 X180.108 Y160.649
G1 Z.4
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
G1 F10200
G1 X182.711 Y160.693 E.08814
G1 X183.106 Y160.654 E.01343
G1 X183.363 Y160.462 E.01086
G1 X183.493 Y160.096 E.01314
G1 X183.505 Y159.396 E.02369
G1 X183.383 Y159.019 E.01341
;PATH_TASK id=410 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.497623
G1 F9896.586
G1 X183.279 Y158.935 E.00505
;PATH_TASK id=411 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.545246
G1 F8958.335
G1 X183.175 Y158.852 E.00557
;PATH_TASK id=412 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.592869
G1 F8182.581
G1 X183.071 Y158.768 E.0061
;PATH_TASK id=413 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.640492
G1 F7530.474
G1 X182.968 Y158.684 E.00663
G1 X183.074 Y158.603 E.00663
;PATH_TASK id=414 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.592869
G1 F8182.581
G1 X183.181 Y158.523 E.0061
;PATH_TASK id=415 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.545246
G1 F8958.335
G1 X183.287 Y158.443 E.00557
;PATH_TASK id=416 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.497623
G1 F9896.586
G1 X183.394 Y158.362 E.00505
;PATH_TASK id=417 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.449999
G1 F10200
G1 X183.529 Y157.99 E.01341
G1 X183.537 Y157.48 E.01727
;PATH_TASK id=418 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.499426
G1 F9857.488
G1 X183.564 Y157.38 E.00391
;PATH_TASK id=419 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.548853
G1 F8894.467
G1 X183.59 Y157.281 E.00433
;PATH_TASK id=420 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.59828
G1 F8102.863
G1 X183.616 Y157.181 E.00476
;PATH_TASK id=421 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.647706
G1 F7440.649
G1 X183.643 Y157.082 E.00518
G1 X183.675 Y154.6 E.12483
;PATH_TASK id=422 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.626588
G1 F7709.863
M73 P79 R8
G1 X183.615 Y154.497 E.00576
;PATH_TASK id=423 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.582441
G1 F8340.736
G1 X183.556 Y154.394 E.00532
;PATH_TASK id=424 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.538294
G1 F9084.055
G1 X183.497 Y154.291 E.00489
;PATH_TASK id=425 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.494147
G1 F9972.824
G1 X183.438 Y154.188 E.00445
;PATH_TASK id=426 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.449999
G1 F10200
G1 X183.144 Y154.001 E.01178
G1 X182.986 Y153.977 E.00542
G1 X182.31 Y153.966 E.02288
G1 X182.067 Y154.012 E.00837
G1 X181.835 Y154.181 E.00974
G1 X181.69 Y154.553 E.01351
G1 X181.674 Y155.448 E.0303
G2 X181.098 Y154.807 I-8.773 J7.315 E.02919
G1 X180.522 Y154.321 E.0255
G1 X179.951 Y154.036 E.02162
G1 X179.405 Y153.927 E.01884
G1 X178.704 Y154.003 E.02386
G1 X178.152 Y154.263 E.02067
G1 X177.95 Y154.428 E.00881
G1 X177.586 Y154.844 E.0187
G1 X177.332 Y155.415 E.02115
G1 X177.234 Y156.046 E.02163
G1 X177.284 Y156.708 E.02249
G1 X177.468 Y157.248 E.0193
G1 X177.847 Y157.783 E.02221
G1 X178.316 Y158.134 E.01981
G1 X178.947 Y158.345 E.02251
;PATH_TASK id=427 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.424168
G1 X179.331 Y158.389 E.01228
;PATH_TASK id=428 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.422618
G1 X179.534 Y158.33 E.00667
;PATH_TASK id=429 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.449999
G1 X179.737 Y158.271 E.00715
G1 X179.938 Y157.937 E.01319
G1 X180.034 Y157.162 E.02644
G1 X179.969 Y156.962 E.00713
;PATH_TASK id=430 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.419082
G1 X179.905 Y156.761 E.00659
;PATH_TASK id=431 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.424168
G1 X179.719 Y156.622 E.00738
;PATH_TASK id=432 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.460171
G1 X179.532 Y156.483 E.00807
;PATH_TASK id=433 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.48871
G1 F10094.438
G1 X179.375 Y156.441 E.00602
;PATH_TASK id=434 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.517249
G1 F9487.086
G1 X179.218 Y156.399 E.00641
G1 X179.12 Y156.312 E.0052
G1 X179.108 Y156.029 E.01116
G1 X179.2 Y155.92 E.00563
G1 X179.363 Y155.931 E.00644
G1 X179.54 Y156.031 E.008
;PATH_TASK id=435 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.48871
G1 F10094.438
G1 X179.717 Y156.131 E.00752
;PATH_TASK id=436 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.460171
G1 F10200
G1 X179.97 Y156.368 E.01204
;PATH_TASK id=437 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.427022
G1 X180.223 Y156.605 E.01108
;PATH_TASK id=438 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.421936
G1 X180.503 Y156.968 E.01444
;PATH_TASK id=439 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.449999
G1 X180.783 Y157.33 E.0155
G1 X181.278 Y157.853 E.02437
G1 X181.77 Y158.234 E.02105
G1 X182.293 Y158.47 E.01943
;PATH_TASK id=440 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.411264
G1 X182.467 Y158.494 E.00536
;PATH_TASK id=441 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.407753
G1 X182.531 Y158.525 E.00217
;PATH_TASK id=442 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.453444
G1 X182.596 Y158.556 E.00244
;PATH_TASK id=443 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.499134
G1 F9863.791
G1 X182.66 Y158.587 E.00271
;PATH_TASK id=444 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.544825
G1 F8965.846
G1 X182.724 Y158.618 E.00298
;PATH_TASK id=445 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.590516
G1 F8217.747
G1 X182.789 Y158.649 E.00326
;PATH_TASK id=446 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.636206
G1 F7584.875
G1 X182.853 Y158.68 E.00353
;PATH_TASK id=447 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X182.785 Y158.702 E.00353
;PATH_TASK id=448 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.590516
G1 F8217.747
G1 X182.717 Y158.724 E.00326
;PATH_TASK id=449 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.544825
G1 F8965.846
G1 X182.649 Y158.746 E.00299
;PATH_TASK id=450 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.499134
G1 F9863.791
G1 X182.58 Y158.768 E.00272
;PATH_TASK id=451 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.453444
G1 F10200
G1 X182.512 Y158.79 E.00244
;PATH_TASK id=452 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.407753
G1 X182.444 Y158.811 E.00217
;PATH_TASK id=453 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.406031
G1 X182.117 Y158.784 E.00991
;PATH_TASK id=454 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.449999
G1 X181.79 Y158.756 E.01111
G1 X179.899 Y158.724 E.064
G1 X179.564 Y158.731 E.01134
;PATH_TASK id=455 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.424136
G3 X178.811 Y158.719 I-.285 J-5.425 E.02392
;PATH_TASK id=409 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.449999
G2 X177.799 Y158.688 I-.994 J16.38 E.03426
G1 X177.579 Y158.726 E.00756
G1 X177.403 Y158.825 E.00682
G1 X177.242 Y159.027 E.00877
G1 X177.178 Y159.289 E.0091
G1 X177.17 Y159.752 E.0157
G1 X177.246 Y160.057 E.01065
G1 X177.433 Y160.264 E.00944
G1 X177.848 Y160.592 E.01791
G1 X178.191 Y161.004 E.01813
G1 X178.479 Y161.516 E.01991
G1 X178.666 Y161.74 E.00989
G1 X178.961 Y161.855 E.01069
G1 X179.712 Y161.87 E.02542
G1 X180.065 Y161.758 E.01254
G1 X180.258 Y161.535 E.00998
G1 X180.269 Y161.009 E.01779
G1 X180.124 Y160.685 E.01202
;PATH_TASK id=456 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X181.124 Y160.688 E-.16
;WIPE_END
G1 Z.8 F24000
G1 X181.125 Y160.623 Z.8
G1 X183.44 Y160.663
G1 X183.553 Y154.03
G1 X181.742 Y153.999
G1 X181.74 Y154.915
G1 X182.025 Y155.841
G1 X182.171 Y156.304
G1 X181.979 Y156.486
G1 X182.083 Y156.596
G1 Z.4
G1 E.8 F1800
M204 P2500
;TYPE:Outer wall
G1 F10200
G2 X180.83 Y155.144 I-23.082 J18.653 E.06496
G1 X180.351 Y154.721 E.02164
G1 X179.901 Y154.471 E.01739
G1 X179.405 Y154.355 E.01726
G1 X178.789 Y154.424 E.02097
G1 X178.353 Y154.642 E.01651
G1 X177.97 Y155.034 E.01855
G1 X177.754 Y155.486 E.01694
G1 X177.665 Y156.016 E.01819
G1 X177.704 Y156.616 E.02037
G1 X177.871 Y157.103 E.01744
G1 X178.185 Y157.519 E.01763
G1 X178.555 Y157.778 E.01526
G1 X179.072 Y157.949 E.01845
G1 X179.315 Y157.987 E.00834
G1 X179.459 Y157.945 E.00507
G1 X179.519 Y157.845 E.00393
G1 X179.608 Y157.111 E.02504
G1 X179.586 Y157 E.00384
G1 X179.458 Y156.91 E.00528
G1 X179.045 Y156.838 E.0142
G1 X178.808 Y156.684 E.00957
G1 X178.692 Y156.515 E.00694
G1 X178.623 Y156.217 E.01033
G1 X178.659 Y155.885 E.01131
G1 X178.79 Y155.65 E.00911
G1 X179.007 Y155.486 E.00918
G1 X179.271 Y155.435 E.00913
G1 X179.58 Y155.508 E.01074
G1 X179.93 Y155.73 E.01403
G1 X180.454 Y156.264 E.02533
G1 X181.091 Y157.031 E.03374
G1 X181.519 Y157.494 E.02135
G1 X182.032 Y157.896 E.02206
G1 X182.463 Y158.097 E.01609
G1 X182.901 Y158.161 E.01499
G1 X183.014 Y158.134 E.00392
G1 X183.097 Y158.011 E.00504
G1 X183.158 Y154.591 E.11579
G1 X183.113 Y154.469 E.0044
G1 X182.979 Y154.406 E.00503
G1 X182.303 Y154.394 E.02288
G1 X182.173 Y154.445 E.00472
G1 X182.118 Y154.569 E.00459
G1 X182.084 Y156.556 E.06727
;PATH_TASK id=457 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X181.423 Y155.806 E-.16
;WIPE_END
G1 Z.8 F24000
G1 X181.557 Y155.752 Z.8
G1 X181.742 Y153.999
G1 X183.553 Y154.03
G1 X183.515 Y156.293
G1 X183.509 Y156.593
G1 X184.25 Y156.605
G1 Z.4
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.647706
G1 F7440.649
G1 X184.248 Y157.087 E.02421
G1 X184.272 Y157.187 E.00518
;PATH_TASK id=458 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.59828
G1 F8102.863
G1 X184.297 Y157.287 E.00476
;PATH_TASK id=459 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.548853
G1 F8894.467
G1 X184.322 Y157.387 E.00433
;PATH_TASK id=460 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.499426
G1 F9857.488
G1 X184.346 Y157.487 E.00391
;PATH_TASK id=461 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.449999
G1 F10200
G1 X184.346 Y207.846 E1.70461
G1 X182.727 Y207.846 E.0548
;PATH_TASK id=462 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.489491
G1 F10076.796
G1 X182.569 Y207.827 E.00594
;PATH_TASK id=463 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.528982
G1 F9258.079
G1 X182.41 Y207.807 E.00647
;PATH_TASK id=464 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.568474
G1 F8562.401
G1 X182.251 Y207.787 E.00699
;PATH_TASK id=465 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.607965
G1 F7963.968
G1 X182.092 Y207.767 E.00752
;PATH_TASK id=466 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.636044
G1 F7586.947
G1 X181.586 Y207.753 E.02495
G1 X181.484 Y207.777 E.00517
;PATH_TASK id=467 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.588123
G1 F8253.817
G1 X181.382 Y207.801 E.00475
;PATH_TASK id=468 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.540201
G1 F9049.216
G1 X181.28 Y207.825 E.00433
;PATH_TASK id=469 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.492279
G1 F10014.265
G1 X180.847 Y207.846 E.01621
;PATH_TASK id=470 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.449999
G1 F10200
G1 X175.654 Y207.846 E.17579
G1 X175.654 Y152.154 E1.88514
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y153.85 E.05742
;PATH_TASK id=471 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.494129
G1 F9973.221
G1 X184.324 Y154.034 E.00697
;PATH_TASK id=472 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.538258
G1 F9084.715
G1 X184.302 Y154.219 E.00765
;PATH_TASK id=473 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.582387
G1 F8341.571
G1 X184.28 Y154.403 E.00833
;PATH_TASK id=474 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.626516
G1 F7710.814
G1 X184.258 Y154.588 E.00901
;PATH_TASK id=457 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.647706
G1 F7440.649
G1 X184.25 Y156.565 E.09946
;PATH_TASK id=475 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F7440.649
G1 X184.248 Y157.087 E-.08342
G1 X184.272 Y157.187 E-.01648
G1 X184.297 Y157.287 E-.01648
G1 X184.322 Y157.387 E-.01648
G1 X184.346 Y157.487 E-.01648
G1 X184.346 Y157.553 E-.01066
;WIPE_END
G1 Z.8 F24000
G1 X184.389 Y157.553 Z.8
G1 X183.44 Y160.663
G1 X181.11 Y160.623
G1 X180.639 Y160.571
G1 X180.171 Y160.36
G1 X179.703 Y160.141
G1 X179.498 Y160.334
G1 X179.38 Y160.208
G1 Z.4
G1 E.8 F1800
M204 P2500
;TYPE:Outer wall
;WIDTH:0.449999
G1 F10200
G2 X182.949 Y160.255 I3.374 J-120.875 E.12083
G1 X183.062 Y160.117 E.00603
G1 X183.076 Y159.389 E.02465
G1 X183.04 Y159.277 E.004
G1 X182.913 Y159.205 E.00493
G1 X177.792 Y159.117 E.17338
G1 X177.674 Y159.158 E.00422
G1 X177.606 Y159.296 E.0052
G1 X177.621 Y159.85 E.01878
G3 X178.166 Y160.305 I-3.786 J5.091 E.02402
G1 X178.555 Y160.776 E.02068
G1 X178.886 Y161.362 E.02278
G1 X179.008 Y161.429 E.0047
G1 X179.744 Y161.439 E.02492
G1 X179.875 Y161.342 E.00553
G1 X179.879 Y161.185 E.00531
G1 X179.611 Y160.589 E.0221
G1 X179.4 Y160.242 E.01374
;PATH_TASK id=476 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X180.4 Y160.246 E-.16
;WIPE_END
G1 Z.8 F24000
G1 X180.319 Y160.427 Z.8
G1 X183.119 Y164.772
G1 X183.22 Y164.944
G1 X183.3 Y165.125
G1 X183.362 Y165.313
G1 X183.404 Y165.507
G1 X183.429 Y165.706
G1 X183.437 Y165.909
G1 X184.389 Y204.041
G1 X184.389 Y207.889
G1 X184.775 Y208.275
G1 Z.4
G1 E.8 F1800
G1 F10200
G1 X175.225 Y208.275 E.32326
G1 X175.225 Y151.725 E1.91415
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y208.235 E1.91279
;PATH_TASK id=477 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X183.775 Y208.239 E-.16
;WIPE_END
G1 Z.8 F24000
G1 X183.775 Y207.889 Z.8
G1 X182.727 Y202.563
G1 X182.395 Y202.557
G1 X182.398 Y202.4
G1 Z.4
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.45
G1 F11054.338
G1 X184 Y200.798 E.0767
G1 X184 Y200.222 E.01949
G1 X182.059 Y202.163 E.09292
G1 X181.491 Y202.156 E.01924
G1 X184 Y199.646 E.12012
G1 X184 Y199.071 E.01949
G1 X180.229 Y202.842 E.18054
G2 X179.911 Y202.584 I-1.309 J1.287 E.01388
G1 X184 Y198.495 E.19575
G1 X184 Y197.919 E.01949
G1 X179.543 Y202.377 E.21339
G2 X179.127 Y202.217 I-.677 J1.141 E.01515
G1 X184 Y197.343 E.23329
G1 X184 Y196.768 E.01949
G1 X178.645 Y202.123 E.25635
G1 X178.547 Y202.114 E.00333
G1 X178.021 Y202.172 E.01792
G1 X184 Y196.192 E.28624
G1 X184 Y195.616 E.01949
G1 X176 Y203.617 E.383
G1 X176 Y203.042 E.01949
G1 X181.185 Y197.856 E.24824
G3 X180.612 Y197.854 I-.277 J-3.092 E.01945
G1 X176 Y202.466 E.22078
G1 X176 Y201.89 E.01949
G1 X180.098 Y197.792 E.19617
G3 X179.741 Y197.573 I.606 J-1.384 E.01421
G1 X176 Y201.314 E.17911
G1 X176 Y200.739 E.01949
G1 X179.408 Y197.33 E.16318
G1 X179.076 Y197.087 E.01395
G1 X175.816 Y200.346 E.15602
;PATH_TASK id=478 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X178.845 Y196.742 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.449954
G1 F7200
G1 X175.857 Y199.73 E.14301
;PATH_TASK id=479 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X177.82 Y202.223 F24000
;WIDTH:0.129025
G1 F7200
G2 X177.467 Y202.467 I2.399 J3.843 E.00308
;PATH_TASK id=480 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X181.295 Y202.214 F24000
;WIDTH:0.193894
G1 F7200
G2 X181.168 Y202.284 I.531 J1.116 E.00182
;PATH_TASK id=481 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.16179
G1 X181.103 Y202.331 E.0008
;PATH_TASK id=482 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.133163
G1 X181.031 Y202.382 E.00067
;PATH_TASK id=483 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.118945
G1 X180.881 Y202.514 E.00126
;PATH_TASK id=484 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X184.143 Y195.399 F24000
;WIDTH:0.339961
G1 F7200
G1 X184.087 Y195.338 E.00205
;PATH_TASK id=485 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.383729
G1 X184.03 Y195.276 E.00236
;PATH_TASK id=486 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.427497
G1 X183.974 Y195.215 E.00266
;PATH_TASK id=487 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.451835
G1 X183.918 Y195.154 E.00283
G1 X183.809 Y195.232 E.00457
G1 X181.794 Y197.247 E.0969
;PATH_TASK id=488 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X181.62 Y197.244 F24000
G1 X182.85 Y195.337
G1 X182.881 Y193.502
G1 X181.597 Y193.48
G1 X181.646 Y193.146
G1 X181.837 Y193.174
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.45
G1 F11054.338
G1 X184 Y191.011 E.10355
G1 X184 Y190.435 E.01949
G1 X181.763 Y192.672 E.10709
G1 X181.56 Y192.513 E.00874
G1 X181.398 Y192.462 E.00574
G1 X184 Y189.859 E.12457
G1 X184 Y189.284 E.01949
G1 X180.876 Y192.408 E.14958
G1 X180.399 Y192.399 E.01615
G1 X180.284 Y192.425 E.00399
G1 X184 Y188.708 E.17792
G1 X184 Y188.132 E.01949
G1 X179.084 Y193.049 E.23534
G1 X178.518 Y193.039 E.01916
G1 X184 Y187.557 E.26244
G1 X184 Y186.981 E.01949
G1 X177.952 Y193.029 E.28954
G1 X177.386 Y193.02 E.01916
G1 X184 Y186.405 E.31663
G1 X184 Y186.33 E.00255
G2 X183.772 Y186.058 I-.771 J.414 E.01211
G1 X182.88 Y186.95 E.04272
G3 X182.163 Y187.667 I-82.411 J-81.701 E.0343
G1 X176 Y193.83 E.29505
G1 X176 Y193.255 E.01949
G1 X181.442 Y187.812 E.26055
G3 X180.749 Y187.929 I-.799 J-2.612 E.02386
G1 X176 Y192.679 E.22737
G1 X176 Y192.103 E.01949
G1 X180.148 Y187.955 E.19859
G1 X179.587 Y187.941 E.01901
G1 X176 Y191.528 E.17171
G1 X176 Y190.952 E.01949
G1 X179.238 Y187.714 E.155
;PATH_TASK id=489 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X180.093 Y192.5 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.233525
G1 F7200
G2 X179.766 Y192.784 I.977 J1.452 E.00688
G1 X179.433 Y193.197 E.0084
;PATH_TASK id=490 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X182.087 Y187.426 F24000
;WIDTH:0.111218
G1 F7200
G1 X181.983 Y187.501 E.00073
;PATH_TASK id=491 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.150111
G1 X181.879 Y187.575 E.00114
;PATH_TASK id=492 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.191604
G3 X181.637 Y187.743 I-2.961 J-4.019 E.00365
;PATH_TASK id=493 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X180.589 Y187.802 F24000
;WIDTH:0.176102
G1 F7200
G1 X180.411 Y187.885 E.00217
G1 X180.314 Y187.822 E.00129
;PATH_TASK id=494 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X178.706 Y187.669 F24000
;WIDTH:0.449954
G1 F7200
G1 X175.857 Y190.519 E.13638
;PATH_TASK id=495 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X178.944 Y187.72 F24000
;WIDTH:0.313472
G1 F7200
G1 X178.125 Y187.963 E.01922
;PATH_TASK id=496 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X176.933 Y187.942 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.507586
G1 F9684.375
G2 X176.933 Y188.043 I-.029 J.05 E.0094
G1 X176.942 Y188.027 E.0007
;PATH_TASK id=497 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X176.468 Y186.925 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X176.468 Y189.045 E.07173
G1 X177.608 Y187.905 E.05457
G1 X177.155 Y187.636 E.01783
G1 X176.589 Y187.084 E.02675
G1 X176.492 Y186.957 E.00541
;PATH_TASK id=498 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X176.5 Y184.369 F24000
;WIDTH:0.398428
G1 F12000
G1 X176.105 Y184.761 E.01646
G1 X176.034 Y184.756 E.00211
G2 X176.051 Y185.967 I13.272 J.416 E.03581
;PATH_TASK id=499 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.448676
G1 F11090.425
G1 X176.061 Y186.65 E.02306
G1 X176.061 Y190.027 E.11395
G1 X178.323 Y187.765 E.10796
G1 X177.915 Y187.613 E.0147
G1 X177.389 Y187.303 E.0206
G1 X176.876 Y186.796 E.02434
G1 X176.692 Y186.523 E.01111
G1 X176.437 Y185.889 E.02306
;PATH_TASK id=500 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.405837
G1 F12000
G1 X176.366 Y185.244 E.01959
G1 X176.412 Y184.63 E.01855
G1 X176.487 Y184.406 E.00713
;PATH_TASK id=501 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X177.794 Y182.954 F24000
;WIDTH:0.38292
G1 F12000
G1 X177.73 Y182.99 E.00208
G1 X177.795 Y183.025 E.00208
;PATH_TASK id=502 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X182.048 Y183.177 F24000
;WIDTH:0.45
G1 F11054.338
G1 X184 Y181.224 E.09348
G1 X184 Y180.648 E.01949
G1 X181.786 Y182.863 E.106
G1 X181.336 Y182.737 E.01583
G1 X184 Y180.073 E.12756
G1 X184 Y179.497 E.01949
G1 X180.813 Y182.684 E.15258
G1 X180.719 Y182.678 E.0032
G1 X180.177 Y182.744 E.01846
G1 X184 Y178.921 E.183
G1 X184 Y178.345 E.01949
G1 X179.359 Y182.987 E.2222
G1 X179.107 Y182.812 E.01037
G1 X178.993 Y182.777 E.00404
G1 X184 Y177.77 E.23968
G1 X184 Y177.194 E.01949
G1 X178.189 Y183.005 E.27819
;PATH_TASK id=503 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X175.87 Y184.749 F24000
G1 F11054.338
G1 X184 Y176.618 E.3892
G1 X184 Y176.043 E.01949
G1 X183.511 Y176.532 E.02343
G1 X183.299 Y177.009 E.01767
G1 X183.165 Y177.222 E.00852
G1 X182.906 Y177.526 E.01353
G1 X182.741 Y177.676 E.00753
G1 X182.396 Y177.919 E.01429
G3 X181.93 Y178.113 I-.885 J-1.47 E.01716
G1 X176 Y184.044 E.28388
G1 X176 Y183.468 E.01949
G1 X181.229 Y178.239 E.25031
G1 X180.921 Y178.248 E.01042
G1 X180.685 Y178.207 E.0081
G1 X176 Y182.892 E.22429
G1 X176 Y182.316 E.01949
G1 X180.228 Y178.088 E.20243
G3 X179.842 Y177.899 I.729 J-1.982 E.01459
G1 X176 Y181.741 E.18392
G1 X176 Y181.165 E.01949
G1 X179.441 Y177.723 E.16475
;PATH_TASK id=504 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X178.095 Y182.912 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.143589
G1 F7200
G2 X177.905 Y183.022 I1.291 J2.449 E.00184
;PATH_TASK id=505 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X179.984 Y182.813 F24000
;WIDTH:0.21261
G1 F7200
G1 X179.845 Y182.907 E.00237
;PATH_TASK id=506 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.164274
G1 X179.706 Y183.001 E.0017
;PATH_TASK id=507 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.140106
G1 X179.567 Y183.095 E.00136
;PATH_TASK id=508 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X178.974 Y177.903 F24000
;WIDTH:0.410293
G1 F7200
G1 X178.555 Y178.048 E.01354
;PATH_TASK id=509 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.449845
G1 X178.535 Y178.054 E.0007
G1 X175.857 Y180.732 E.12815
;PATH_TASK id=510 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X179.781 Y177.669 F24000
;WIDTH:0.111469
G1 F7200
G2 X179.618 Y177.765 I.361 J.804 E.00108
;PATH_TASK id=511 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.141811
G1 X179.533 Y177.815 E.00081
;PATH_TASK id=512 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X179.434 Y177.525 F24000
G1 X180.727 Y177.833
G1 X180.97 Y177.862
G1 X181.221 Y177.865
G1 X181.367 Y177.855
G1 X181.512 Y177.836
G1 X181.724 Y177.789
G1 X181.862 Y177.745
G1 X181.991 Y177.695
G1 X182.115 Y177.636
G1 X182.242 Y177.564
G1 X182.423 Y177.44
G1 X182.567 Y177.318
G1 X182.688 Y177.198
G1 X182.803 Y177.064
G1 X182.905 Y176.921
G1 X182.995 Y176.77
G1 X183.072 Y176.613
G1 X183.13 Y176.464
G1 X183.181 Y176.305
G1 X183.197 Y176.234
G1 X184.389 Y175.825
G1 X184.143 Y175.825
;WIDTH:0.339961
G1 F7200
G1 X184.087 Y175.764 E.00205
;PATH_TASK id=513 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.383729
G1 X184.03 Y175.703 E.00236
;PATH_TASK id=514 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.427497
G1 X183.974 Y175.641 E.00266
;PATH_TASK id=515 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.458302
G1 X183.918 Y175.58 E.00287
G1 X183.809 Y175.659 E.00464
G1 X183.475 Y175.992 E.01631
;PATH_TASK id=516 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X183.651 Y175.579 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.378626
G1 F12000
G1 X183.904 Y175.33 E.00992
G1 X183.975 Y175.336 E.002
;PATH_TASK id=517 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.39647
G1 X183.957 Y174.79 E.01606
;PATH_TASK id=518 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.449002
G1 F11081.509
G1 X183.939 Y174.244 E.01844
G1 X183.939 Y170.635 E.12187
G1 X181.603 Y172.971 E.11156
G1 X182.033 Y173.058 E.01482
G1 X182.577 Y173.335 E.02061
G1 X183.037 Y173.737 E.0206
G1 X183.409 Y174.276 E.02213
;PATH_TASK id=519 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.436954
G1 F11420.355
G1 X183.523 Y174.647 E.01271
;PATH_TASK id=520 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.408951
G1 F12000
G1 X183.636 Y175.018 E.01181
G1 X183.65 Y175.539 E.01587
;PATH_TASK id=521 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X183.532 Y173.731 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X183.532 Y171.617 E.07155
G1 X182.376 Y172.774 E.05537
G1 X182.828 Y173.015 E.01733
G1 X183.304 Y173.43 E.02141
G1 X183.508 Y173.699 E.01142
;PATH_TASK id=522 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X183.125 Y172.62 F24000
;WIDTH:0.508342
G1 F9668.645
G2 X183.125 Y172.721 I-.029 J.05 E.00943
G1 X183.134 Y172.705 E.0007
;PATH_TASK id=523 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X184.184 Y170.103 F24000
;WIDTH:0.450008
G1 F11054.12
G1 X181.141 Y173.145 E.14567
;PATH_TASK id=524 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X182.939 Y170.772 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.450271
G1 F7200
G1 X180.853 Y172.858 E.09991
G1 X180.795 Y172.93 E.00312
;PATH_TASK id=525 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.4467
G1 X180.833 Y172.96 E.00163
;PATH_TASK id=526 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.399011
G1 X180.871 Y172.991 E.00144
;PATH_TASK id=527 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.351323
G1 X180.909 Y173.021 E.00125
;PATH_TASK id=528 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.303635
G1 X180.947 Y173.052 E.00105
;PATH_TASK id=529 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.255947
G1 X180.985 Y173.082 E.00086
;PATH_TASK id=530 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.232103
G1 X181.022 Y173.113 E.00076
;PATH_TASK id=531 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X184.052 Y169.474 F24000
;WIDTH:0.445815
G1 F7200
G1 X183.701 Y170.015 E.0216
;PATH_TASK id=532 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.417427
G1 X183.628 Y170.123 E.00408
;PATH_TASK id=533 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.36894
G1 X183.554 Y170.231 E.00355
;PATH_TASK id=534 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.320453
G1 X183.48 Y170.339 E.00302
;PATH_TASK id=535 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.313074
G1 X183.12 Y170.666 E.01091
;PATH_TASK id=536 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.343637
G1 X183.06 Y170.707 E.00181
;PATH_TASK id=537 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X183.066 Y170.368 F24000
G1 X183.275 Y170.371
G1 X183.437 Y165.909
G1 X183.429 Y165.706
G1 X183.404 Y165.507
G1 X183.362 Y165.313
G1 X183.3 Y165.125
G1 X183.22 Y164.944
G1 X183.119 Y164.772
G1 X182.999 Y164.61
G1 X182.875 Y164.473
G1 X182.74 Y164.348
G1 X182.585 Y164.228
G1 X182.441 Y164.133
G1 X182.29 Y164.049
G1 X182.126 Y163.971
G1 X181.928 Y163.893
G1 X181.784 Y163.846
G1 X181.627 Y163.802
G1 X181.453 Y163.763
G1 X181.242 Y163.725
G1 X180.995 Y163.693
G1 X180.695 Y163.667
G1 X180.513 Y163.658
G1 X180.236 Y163.651
G1 X180.188 Y163.651
G1 X179.551 Y161.825
G1 X179.547 Y162.074
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.450008
G1 F11054.12
G1 X175.87 Y165.751 E.176
;PATH_TASK id=538 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X178.987 Y162.058 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.449959
G1 F7200
G1 X175.857 Y165.188 E.14981
;PATH_TASK id=539 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X179.241 Y162.092 F24000
;WIDTH:0.32452
G1 F7200
G1 X178.358 Y162.399 E.02189
;PATH_TASK id=540 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X178.67 Y161.81 F24000
G1 X177.207 Y160.092
G1 X177.23 Y158.722
G1 X180.106 Y158.77
G1 X180.202 Y158.772
G1 X180.21 Y158.299
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.496745
G1 F9915.716
G1 X181.182 Y158.315 E.03666
G3 X180.417 Y157.563 I3.363 J-4.177 E.04055
G1 X180.331 Y158.098 E.02046
G1 X180.231 Y158.265 E.00734
;PATH_TASK id=541 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X179.864 Y158.221 F24000
G1 X182.55 Y158.509
G1 X182.721 Y158.525
G1 X183.459 Y158.552
G1 X183.474 Y158.141
G1 X183.93 Y158.157
;WIDTH:0.469124
G1 F10558.324
G1 X183.94 Y157.575 E.02062
;PATH_TASK id=542 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X183.92 Y159.315 F24000
;WIDTH:0.470023
G1 F10536.099
G1 X183.939 Y159.144 E.00613
;PATH_TASK id=543 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.431965
G1 F11566.784
G1 X183.958 Y158.972 E.00559
;PATH_TASK id=544 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.410609
G1 F12000
G1 X183.977 Y158.8 E.00528
G1 X183.936 Y158.212 E.01804
;PATH_TASK id=545 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.462621
G1 F10721.931
G1 X183.93 Y158.157 E.00192
;PATH_TASK id=546 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.445563
G1 F11176.167
G1 X183.806 Y158.376 E.00841
;PATH_TASK id=547 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.384889
G1 F12000
G1 X183.682 Y158.594 E.00714
G1 X183.578 Y158.694 E.0041
G1 X183.703 Y158.845 E.00557
;PATH_TASK id=548 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.393907
G1 X183.77 Y158.99 E.00465
;PATH_TASK id=549 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.431965
G1 F11566.784
G1 X183.836 Y159.134 E.00516
;PATH_TASK id=550 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.450994
G1 F11027.412
G1 X183.903 Y159.279 E.00541
;PATH_TASK id=551 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X183.912 Y160.266 F24000
;WIDTH:0.504299
G1 F9753.372
G1 X183.923 Y159.355 E.03495
;PATH_TASK id=552 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X182.707 Y162.309 F24000
;WIDTH:0.532534
G1 F9190.913
G1 X182.646 Y162.309 E.00249
G1 X182.616 Y162.362 E.00249
G1 X182.646 Y162.415 E.00249
G1 X182.707 Y162.415 E.00249
G1 X182.718 Y162.397 E.00086
;PATH_TASK id=553 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X183.125 Y163.094 F24000
;WIDTH:0.460588
G1 F10774.108
G1 X183.125 Y161.887 E.04191
G1 X182.017 Y161.925 E.03853
;PATH_TASK id=554 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.510044
G1 F9633.417
G1 X181.728 Y161.936 E.01122
;PATH_TASK id=555 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.555774
G1 F8774.431
G1 X181.439 Y161.947 E.01232
G1 X181.404 Y162.093 E.00643
G1 X181.193 Y162.405 E.01605
G1 X181.729 Y162.477 E.02309
;PATH_TASK id=556 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.546365
G1 F8938.417
G1 X181.998 Y162.58 E.01205
;PATH_TASK id=557 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.507819
G1 F9679.531
G1 X182.266 Y162.684 E.01113
;PATH_TASK id=558 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.462129
G1 F10734.514
G3 X182.827 Y162.912 I-3.024 J8.228 E.0211
G1 X183.091 Y163.073 E.01079
;PATH_TASK id=559 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X183.532 Y163.962 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X183.532 Y161.338 E.0888
G1 X183.289 Y161.444 E.00897
G1 X182.858 Y161.51 E.01477
G1 X181.056 Y161.479 E.06099
G1 X180.991 Y161.889 E.01405
G1 X180.68 Y162.306 E.0176
;PATH_TASK id=560 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.467931
G1 F10587.967
G1 X180.408 Y162.474 E.01128
;PATH_TASK id=561 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.503795
G1 F9764.052
G1 X180.137 Y162.642 E.01223
;PATH_TASK id=562 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.5405
G1 F9043.772
G1 X180.051 Y162.689 E.00404
;PATH_TASK id=563 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.578048
G1 F8409.203
G1 X179.966 Y162.736 E.00435
;PATH_TASK id=564 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.572352
G1 F8499.683
G1 X180.185 Y162.762 E.00971
;PATH_TASK id=565 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.523411
G1 F9365.429
G1 X180.404 Y162.788 E.00881
;PATH_TASK id=566 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.453178
G1 F10968.71
G3 X181.773 Y162.962 I-2.482 J24.963 E.04708
G1 X182.491 Y163.202 E.02582
G1 X183.124 Y163.57 E.02498
G1 X183.503 Y163.934 E.01794
;PATH_TASK id=567 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X183.908 Y165.708 F24000
;WIDTH:0.497477
G1 F9899.764
G1 X183.924 Y165.405 E.01148
;PATH_TASK id=568 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.451026
G1 F11026.568
G1 X183.939 Y165.101 E.01031
G1 X183.939 Y160.719 E.14871
;PATH_TASK id=569 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.463808
G1 F10691.699
G1 X183.926 Y160.492 E.00794
;PATH_TASK id=570 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.481633
G1 F10257.285
G1 X183.912 Y160.266 E.00827
G1 X183.645 Y160.75 E.02017
;PATH_TASK id=571 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.449999
G1 F11054.367
G1 X183.217 Y161.043 E.01757
G1 X182.698 Y161.1 E.01765
G1 X180.656 Y161.065 E.06913
G1 X180.647 Y161.622 E.01884
G1 X180.606 Y161.741 E.00425
G1 X180.351 Y162.044 E.0134
G1 X179.886 Y162.262 E.01739
G1 X179.561 Y162.267 E.011
G1 X179.561 Y162.348 E.00275
G1 X178.426 Y163.483 E.05432
G1 X178.937 Y163.313 E.01823
G1 X179.689 Y163.215 E.02565
G1 X180.786 Y163.224 E.03714
G1 X181.644 Y163.349 E.02933
G1 X182.403 Y163.608 E.02716
G1 X182.912 Y163.918 E.02017
G1 X183.408 Y164.417 E.02383
G1 X183.746 Y165.062 E.02466
;PATH_TASK id=572 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.465825
G1 F10640.693
G1 X183.822 Y165.366 E.011
;PATH_TASK id=573 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.481651
G1 F10256.865
G1 X183.898 Y165.669 E.01141
;PATH_TASK id=574 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X183.908 Y165.708 F24000
;WIDTH:0.513302
G1 F9566.692
G1 X183.892 Y166.376 E.02612
;PATH_TASK id=575 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X183.548 Y167.851 F24000
;WIDTH:0.472068
G1 F10485.893
G2 X183.555 Y167.932 I-.025 J.043 E.00775
;PATH_TASK id=576 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X183.838 Y169.018 F24000
;WIDTH:0.652688
G1 F7379.856
G1 X183.838 Y169.412 E.02
;PATH_TASK id=577 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X183.838 Y169.018 F24000
;WIDTH:0.632419
G1 F7633.599
G1 X183.858 Y168.935 E.00415
;PATH_TASK id=578 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.591882
G1 F8197.3
G1 X183.879 Y168.853 E.00386
;PATH_TASK id=579 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.551344
G1 F8850.889
G1 X183.899 Y168.771 E.00358
;PATH_TASK id=580 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.510806
G1 F9617.734
G1 X183.919 Y168.689 E.00329
;PATH_TASK id=581 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.451019
G1 F11026.734
G1 X183.939 Y168.607 E.00287
G1 X183.939 Y167.009 E.05421
;PATH_TASK id=582 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.472352
G1 F10478.976
G1 X183.917 Y166.73 E.01001
;PATH_TASK id=583 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.517056
G1 F9490.952
G1 X183.895 Y166.45 E.01105
;PATH_TASK id=584 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.543667
G1 F8986.574
G1 X183.89 Y166.416 E.00145
;PATH_TASK id=585 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.523445
G1 F9364.772
G1 X183.771 Y166.707 E.01259
;PATH_TASK id=586 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.452586
G1 F10984.563
G3 X183.511 Y167.258 I-2.64 J-.91 E.02081
G1 X183.069 Y167.783 E.02336
G1 X182.664 Y168.076 E.01703
G1 X183.117 Y168.155 E.01566
G1 X183.336 Y168.283 E.00865
G1 X183.636 Y168.645 E.01604
;PATH_TASK id=587 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.470268
G1 F10530.062
G1 X183.673 Y168.713 E.00272
;PATH_TASK id=588 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.510806
G1 F9617.734
G1 X183.709 Y168.78 E.00298
;PATH_TASK id=589 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.551344
G1 F8850.889
G1 X183.746 Y168.848 E.00324
;PATH_TASK id=590 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.591882
G1 F8197.3
G1 X183.782 Y168.915 E.0035
;PATH_TASK id=591 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.612151
G1 F7905.413
G1 X183.819 Y168.982 E.00363
;PATH_TASK id=592 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X183.299 Y168.974 F24000
G1 X183.306 Y168.536
G1 X179.553 Y168.093
G1 X179.415 Y168.076
G1 X179.19 Y168.041
G1 X179.003 Y168.003
G1 X178.834 Y167.961
G1 X178.692 Y167.918
G1 X178.549 Y167.867
G1 X178.412 Y167.81
G1 X178.25 Y167.733
G1 X178.102 Y167.65
G1 X178 Y167.584
G1 X177.87 Y167.49
G1 X177.763 Y167.4
G1 X177.662 Y167.303
G1 X177.544 Y167.172
G1 X177.446 Y167.042
G1 X177.362 Y166.907
G1 X177.288 Y166.762
G1 X177.217 Y166.582
G1 X177.168 Y166.408
G1 X177.134 Y166.233
G1 X177.115 Y166.069
G1 X177.109 Y165.877
G1 X177.114 Y165.717
G1 X177.135 Y165.521
G1 X177.173 Y165.33
G1 X177.215 Y165.182
G1 X177.273 Y165.028
G1 X177.318 Y164.935
G1 X176.999 Y164.781
;WIDTH:0.38292
G1 F12000
G1 X177.456 Y164.238 E.02004
G1 X177.626 Y164.076 E.00663
;PATH_TASK id=593 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X176.462 Y168.21 F24000
;WIDTH:0.437732
G1 F11397.83
G1 X176.84 Y167.828 E.01766
G1 X176.966 Y167.757 E.00476
G1 X176.678 Y167.397 E.01515
G1 X176.462 Y166.93 E.0169
G1 X176.462 Y168.17 E.04073
;PATH_TASK id=594 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X176.94 Y172.845 F24000
;WIDTH:0.581194
G1 F8360.055
G1 X177.581 Y172.466 E.03334
G1 X177.682 Y172.418 E.005
G1 X177.415 Y172.183 E.01591
G1 X176.94 Y171.414 E.04045
G1 X176.94 Y172.805 E.06227
;PATH_TASK id=595 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X176.468 Y174.133 F24000
;WIDTH:0.446756
G1 F11143.14
G1 X176.755 Y173.667 E.01838
G1 X177.243 Y173.204 E.02259
G1 X177.802 Y172.884 E.02163
G1 X178.051 Y172.785 E.00899
G1 X178.572 Y172.71 E.01768
;PATH_TASK id=596 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.41669
G1 F12000
G1 X179.161 Y172.712 E.01831
G1 X179.666 Y172.789 E.01587
;PATH_TASK id=597 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.457942
G1 F10842.807
G1 X179.808 Y172.827 E.00506
G1 X180.26 Y172.603 E.01743
;PATH_TASK id=598 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.419738
G1 F11942.12
G1 X180.476 Y172.409 E.00908
;PATH_TASK id=599 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.382243
G1 F12000
G1 X180.692 Y172.216 E.00818
;PATH_TASK id=600 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.381427
G1 X180.883 Y172 E.00811
;PATH_TASK id=601 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.41729
G1 X181.073 Y171.784 E.00897
;PATH_TASK id=602 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.468043
G1 F10585.171
G3 X181.621 Y171.211 I4.871 J4.107 E.02804
G1 X180.906 Y171.199 E.02528
G1 X180.9 Y171.39 E.00678
;PATH_TASK id=603 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.453583
G1 F10957.903
G1 X180.809 Y171.536 E.00589
;PATH_TASK id=604 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.41858
G1 F11978.933
G1 X180.717 Y171.682 E.00538
;PATH_TASK id=605 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.379589
G1 F12000
G1 X180.625 Y171.828 E.00483
G1 X180.217 Y172.183 E.01515
;PATH_TASK id=606 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.403723
G1 X180.115 Y172.244 E.00357
;PATH_TASK id=607 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.443428
G1 F11235.734
G1 X180.013 Y172.305 E.00396
G1 X179.675 Y172.386 E.01157
;PATH_TASK id=608 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.437943
G1 F11391.748
G1 X179.369 Y172.369 E.01006
;PATH_TASK id=609 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.406464
G1 F12000
G2 X178.591 Y172.335 I-1.404 J23.049 E.02353
;PATH_TASK id=610 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.448796
G1 F11087.129
G1 X178.365 Y172.288 E.00779
G1 X177.937 Y172.018 E.01708
G1 X177.729 Y171.816 E.00978
G1 X177.326 Y171.136 E.02667
G1 X177.012 Y170.786 E.01588
G1 X176.698 Y170.55 E.01326
G1 X176.468 Y170.294 E.01162
G1 X176.468 Y174.093 E.1282
;PATH_TASK id=611 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X176.927 Y178.168 F24000
;WIDTH:0.498172
G1 F9884.635
G2 X176.927 Y178.266 I-.028 J.049 E.00902
G1 X176.936 Y178.251 E.00064
;PATH_TASK id=612 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X177.566 Y178.159 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X177.013 Y177.769 E.02292
G1 X176.468 Y177.094 E.02938
G1 X176.468 Y179.258 E.07324
G1 X177.538 Y178.187 E.05124
;PATH_TASK id=613 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X178.31 Y177.991 F24000
;WIDTH:0.458527
G1 F10827.543
G1 X178.062 Y177.942 E.00874
G1 X177.793 Y177.822 E.01017
G1 X177.248 Y177.437 E.02308
G1 X176.816 Y176.878 E.02441
G1 X176.539 Y176.167 E.02636
G1 X176.489 Y175.524 E.0223
;PATH_TASK id=614 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.481406
G1 F10262.584
G1 X176.551 Y174.896 E.02298
G1 X176.997 Y174.013 E.03608
;PATH_TASK id=615 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.450136
G1 F11050.663
G1 X177.524 Y173.5 E.02489
G1 X177.992 Y173.243 E.01809
G1 X178.122 Y173.186 E.0048
G1 X178.77 Y173.076 E.02225
G1 X179.084 Y173.086 E.01066
G1 X179.605 Y173.195 E.01801
G1 X179.828 Y173.286 E.00816
G1 X180.374 Y173.018 E.0206
G1 X180.57 Y172.981 E.00675
G1 X180.579 Y172.846 E.00458
G1 X182.613 Y170.81 E.09743
G1 X180.492 Y170.774 E.07181
G1 X180.486 Y171.34 E.01916
G1 X180.296 Y171.657 E.01253
G1 X179.922 Y171.911 E.0153
G1 X179.572 Y171.985 E.01211
G1 X178.721 Y171.964 E.02883
G1 X178.41 Y171.863 E.01109
G1 X178.07 Y171.594 E.01469
G1 X177.68 Y170.935 E.02593
G1 X177.315 Y170.501 E.01918
G1 X177.001 Y170.277 E.01308
G1 X176.706 Y169.934 E.0153
;PATH_TASK id=616 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.474404
G1 F10429.135
G1 X176.64 Y169.774 E.00621
;PATH_TASK id=617 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.516905
G1 F9493.976
G1 X176.574 Y169.614 E.00682
G1 X176.571 Y168.994 E.02443
;PATH_TASK id=618 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.502125
G1 F9799.561
G1 X176.641 Y168.78 E.0086
;PATH_TASK id=619 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.451686
G1 F11008.757
G1 X176.711 Y168.565 E.00766
G1 X177.015 Y168.191 E.01639
G1 X177.269 Y168.056 E.00977
G1 X177.546 Y167.994 E.00965
G1 X177.857 Y167.998 E.0106
G1 X177.532 Y167.785 E.01321
G1 X177.075 Y167.279 E.02318
;PATH_TASK id=620 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.473417
G1 F10453.052
G1 X176.905 Y166.977 E.0124
;PATH_TASK id=621 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.520251
G1 F9427.426
G1 X176.734 Y166.676 E.01375
;PATH_TASK id=622 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.557341
G1 F8747.711
G1 X176.711 Y166.645 E.00168
;PATH_TASK id=623 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.575319
G1 F8452.308
G1 X176.687 Y166.613 E.00174
G1 X176.616 Y166.003 E.02717
;PATH_TASK id=624 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.54878
G1 F8895.741
G1 X176.674 Y165.304 E.02951
G1 X176.178 Y165.8 E.02948
G1 X176.11 Y165.8 E.00288
;PATH_TASK id=625 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.560678
G1 F8691.323
G1 X176.122 Y166.228 E.01843
;PATH_TASK id=626 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.585798
G1 F8289.167
G1 X176.135 Y166.656 E.01932
;PATH_TASK id=627 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.573631
G1 F8479.196
G1 X176.11 Y166.919 E.01165
;PATH_TASK id=628 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.524178
G1 F9350.493
G1 X176.085 Y167.182 E.01057
;PATH_TASK id=629 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.455602
G1 F10904.283
G1 X176.061 Y167.444 E.00906
G1 X176.061 Y168.481 E.03557
;PATH_TASK id=630 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.468349
G1 F10577.564
G1 X176.078 Y168.737 E.00909
;PATH_TASK id=631 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.514823
G1 F9535.856
G3 X176.096 Y169.615 I-6.834 J.579 E.03448
;PATH_TASK id=632 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.503352
G1 F9773.435
G1 X176.078 Y169.941 E.01249
;PATH_TASK id=633 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.454026
G1 F10946.086
G1 X176.061 Y170.267 E.01115
G2 X176.069 Y175.447 I320.619 J2.094 E.17709
G3 X176.061 Y176.946 I-18.605 J.65 E.05127
G1 X176.061 Y180.241 E.11261
G1 X178.281 Y178.02 E.10736
;PATH_TASK id=634 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X178.379 Y177.572 F24000
G1 X182.801 Y184.118
G1 X182.893 Y184.286
G1 X182.957 Y184.432
G1 X183.021 Y184.616
G1 X183.059 Y184.769
G1 X183.089 Y184.942
G1 X183.104 Y185.118
G1 X183.107 Y185.284
G1 X183.095 Y185.489
G1 X183.067 Y185.689
G1 X183.033 Y185.845
G1 X182.976 Y186.033
G1 X182.917 Y186.181
G1 X182.83 Y186.356
G1 X182.747 Y186.491
G1 X182.645 Y186.633
G1 X182.53 Y186.768
G1 X182.421 Y186.878
G1 X182.301 Y186.985
G1 X182.188 Y187.072
G1 X182.037 Y187.169
G1 X181.999 Y187.19
G1 X182.163 Y187.491
;WIDTH:0.38292
G1 F12000
G1 X182.479 Y187.246 E.01131
G1 X182.935 Y186.778 E.01846
;PATH_TASK id=635 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X182.675 Y186.591 F24000
G1 X182.747 Y186.491
G1 X182.83 Y186.356
G1 X182.917 Y186.181
G1 X182.976 Y186.033
G1 X183.033 Y185.845
G1 X183.067 Y185.689
G1 X183.095 Y185.489
G1 X183.107 Y185.284
G1 X183.104 Y185.118
G1 X183.089 Y184.942
G1 X183.059 Y184.769
G1 X183.021 Y184.616
G1 X182.957 Y184.432
G1 X182.893 Y184.286
G1 X182.801 Y184.118
G1 X182.701 Y183.97
G1 X182.614 Y183.861
G1 X182.519 Y183.758
G1 X182.389 Y183.636
G1 X182.247 Y183.525
G1 X182.161 Y183.468
G1 X182.393 Y183.119
;WIDTH:0.449654
G1 F11063.744
G1 X182.849 Y183.472 E.01948
G1 X183.116 Y183.793 E.01412
G1 X183.402 Y184.356 E.02139
G1 X183.539 Y184.974 E.0214
G1 X183.526 Y185.648 E.02279
G1 X183.403 Y186.137 E.01704
G1 X183.704 Y185.864 E.01374
G1 X183.934 Y185.926 E.00808
G2 X183.939 Y181.573 I-537.099 J-2.806 E.14723
G1 X182.421 Y183.091 E.07261
;PATH_TASK id=636 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X183.027 Y183.067 F24000
;WIDTH:0.459049
G1 F10813.954
G1 X183.402 Y183.485 E.01941
G1 X183.528 Y183.695 E.00847
G1 X183.528 Y182.567 E.03904
G1 X183.055 Y183.039 E.02312
;PATH_TASK id=637 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X183.939 Y191.36 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X182.254 Y193.045 E.08069
G1 X182.486 Y193.063 E.0079
G1 X182.904 Y193.244 E.0154
G1 X183.209 Y193.607 E.01606
;PATH_TASK id=638 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.467565
G1 F10597.086
G1 X183.264 Y193.76 E.00576
;PATH_TASK id=639 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.502697
G1 F9787.353
G1 X183.319 Y193.914 E.00624
;PATH_TASK id=640 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.557832
G1 F8739.357
G1 X183.374 Y194.068 E.00698
G3 X183.332 Y195.006 I-7.147 J.15 E.04026
;PATH_TASK id=641 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.542085
G1 F9015.067
G1 X183.271 Y195.081 E.00402
;PATH_TASK id=642 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.498009
G1 F9888.177
G1 X183.209 Y195.156 E.00367
;PATH_TASK id=643 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.453934
G1 F10948.544
G1 X183.148 Y195.231 E.00331
;PATH_TASK id=644 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.409858
G1 F12000
G1 X183.086 Y195.306 E.00296
;PATH_TASK id=645 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.37279
G1 X183.025 Y195.381 E.00266
G1 X182.625 Y195.694 E.01393
;PATH_TASK id=646 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.42165
G1 F11881.841
G1 X182.508 Y195.732 E.00387
;PATH_TASK id=647 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.455932
G1 F10895.58
G1 X182.391 Y195.769 E.00421
;PATH_TASK id=648 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.506078
G1 F9715.909
G3 X182.124 Y195.803 I-.185 J-.379 E.01058
G1 X182.11 Y196.603 E.03079
G1 X182.516 Y196.197 E.02212
;PATH_TASK id=649 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.485146
G1 F10175.8
G1 X182.647 Y196.097 E.00604
;PATH_TASK id=650 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.440727
G1 F11312.017
G1 X182.778 Y195.998 E.00543
;PATH_TASK id=651 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.396309
G1 F12000
G1 X182.908 Y195.899 E.00483
;PATH_TASK id=652 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.359301
G1 X183.288 Y195.54 E.01373
;PATH_TASK id=653 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.366464
G1 X183.336 Y195.461 E.00251
;PATH_TASK id=654 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.410388
G1 X183.385 Y195.381 E.00285
;PATH_TASK id=655 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.454312
G1 F10938.471
G1 X183.433 Y195.301 E.00319
;PATH_TASK id=656 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.498236
G1 F9883.245
G1 X183.482 Y195.222 E.00353
;PATH_TASK id=657 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.560031
G1 F8702.198
G1 X183.53 Y195.142 E.00401
G1 X183.816 Y194.856 E.01738
G1 X183.882 Y194.856 E.00284
G1 X183.887 Y194.06 E.03424
;PATH_TASK id=658 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.537741
G1 F9094.204
G1 X183.904 Y193.878 E.00755
;PATH_TASK id=659 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.502644
G1 F9788.482
G1 X183.922 Y193.695 E.00701
;PATH_TASK id=660 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.452804
G1 F10978.731
G1 X183.939 Y193.512 E.00625
G1 X183.939 Y191.4 E.072
;PATH_TASK id=661 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X183.535 Y192.335 F24000
;WIDTH:0.443967
G1 F11220.629
G1 X183.022 Y192.848 E.0242
G1 X183.2 Y192.968 E.00715
G1 X183.457 Y193.245 E.01259
G1 X183.535 Y193.387 E.0054
G1 X183.535 Y192.375 E.03373
;PATH_TASK id=662 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X179.912 Y192.776 F24000
G1 X176.661 Y193.396
G1 X176.638 Y194.737
G1 X176.134 Y194.729
;WIDTH:0.593106
G1 F8179.053
G1 X176.13 Y194.07 E.03012
;PATH_TASK id=663 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.568238
G1 F8566.253
G1 X176.204 Y193.945 E.00635
;PATH_TASK id=664 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.527056
G1 F9294.916
G1 X176.278 Y193.82 E.00585
;PATH_TASK id=665 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.485874
G1 F10159.067
G1 X176.352 Y193.695 E.00536
;PATH_TASK id=666 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.444693
G1 F11200.37
G1 X176.427 Y193.57 E.00486
;PATH_TASK id=667 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.395266
G1 F12000
G1 X176.501 Y193.445 E.00426
G1 X176.757 Y193.222 E.00995
;PATH_TASK id=668 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X176.134 Y194.729 F24000
;WIDTH:0.57282
G1 F8492.171
G1 X176.11 Y194.968 E.01061
;PATH_TASK id=669 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.523692
G1 F9359.955
G1 X176.085 Y195.208 E.00962
;PATH_TASK id=670 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.450596
G1 F11038.186
G1 X176.061 Y195.447 E.00816
G1 X176.061 Y199.239 E.12852
G1 X178.533 Y196.766 E.11852
G1 X176.609 Y195.362 E.08073
;PATH_TASK id=671 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.467728
G1 F10593.041
G1 X176.469 Y195.18 E.00811
;PATH_TASK id=672 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.503184
G1 F9777.008
G1 X176.329 Y194.998 E.00878
;PATH_TASK id=673 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.53864
G1 F9077.708
G1 X176.189 Y194.816 E.00946
;PATH_TASK id=674 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.556368
G1 F8764.276
G1 X176.156 Y194.763 E.00272
;PATH_TASK id=675 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X176.468 Y195.763 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X176.468 Y198.256 E.08438
G1 X177.909 Y196.815 E.06898
G1 X176.5 Y195.786 E.05904
;PATH_TASK id=676 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X176.854 Y196.523 F24000
;WIDTH:0.408262
G1 F12000
G1 X176.854 Y197.323 E.02432
G1 X177.317 Y196.861 E.01988
G1 X176.886 Y196.546 E.01619
;PATH_TASK id=677 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X177.362 Y202.422 F24000
;WIDTH:0.38292
G1 F12000
G1 X176.68 Y203.03 E.02583
;PATH_TASK id=678 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.401163
G1 X176.413 Y203.397 E.01351
;PATH_TASK id=679 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.437649
G1 F11400.226
G1 X176.146 Y203.763 E.01489
;PATH_TASK id=680 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.475096
G1 F10412.424
G1 X176.083 Y203.876 E.00464
;PATH_TASK id=681 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.471793
G1 F10492.616
G1 X176.06 Y204.145 E.00962
;PATH_TASK id=682 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.415035
G1 F12000
G1 X176.038 Y204.414 E.00834
G1 X176.057 Y205.272 E.02655
;PATH_TASK id=683 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X176.063 Y205.342 F24000
;WIDTH:0.448954
G1 F11082.839
G1 X176.061 Y207.439 E.0708
G1 X177.234 Y207.439 E.03961
;PATH_TASK id=684 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.471964
G1 F10488.434
G1 X177.475 Y207.417 E.00863
;PATH_TASK id=685 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.515894
G1 F9514.265
G1 X177.715 Y207.395 E.00951
;PATH_TASK id=686 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.559824
G1 F8705.678
G1 X177.956 Y207.373 E.01039
;PATH_TASK id=687 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.592965
G1 F8181.157
G1 X178.014 Y207.362 E.00268
;PATH_TASK id=688 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.584873
G1 F8303.313
G1 X177.837 Y207.279 E.00881
;PATH_TASK id=689 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.546337
G1 F8938.909
G1 X177.66 Y207.195 E.00819
;PATH_TASK id=690 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.507802
G1 F9679.878
G1 X177.484 Y207.111 E.00756
;PATH_TASK id=691 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.453255
G1 F10966.665
G1 X177.307 Y207.027 E.00667
G1 X176.826 Y206.698 E.01988
G1 X176.417 Y206.205 E.02188
G1 X176.258 Y205.915 E.01129
G1 X176.076 Y205.38 E.01927
;PATH_TASK id=692 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X176.53 Y206.948 F24000
;WIDTH:0.515988
G1 F9512.375
G2 X176.53 Y207.051 I-.03 J.051 E.00974
G1 X176.54 Y207.034 E.00075
;PATH_TASK id=693 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X178.014 Y207.362 F24000
;WIDTH:0.586142
G1 F8283.914
G1 X178.265 Y207.38 E.01136
;PATH_TASK id=694 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.555007
G1 F8787.568
G2 X178.66 Y207.392 I.248 J-1.703 E.01687
;PATH_TASK id=695 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X179.861 Y206.932 F24000
;WIDTH:0.542736
G1 F9003.314
G1 X179.799 Y206.932 E.0026
G1 X179.767 Y206.986 E.0026
G1 X179.799 Y207.04 E.0026
G1 X179.861 Y207.04 E.0026
G1 X179.872 Y207.021 E.00093
;PATH_TASK id=696 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X179.567 Y206.029 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X179.475 Y206.666 E.02178
G1 X179.429 Y206.768 E.00381
G1 X179.088 Y207.17 E.01784
;PATH_TASK id=697 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.471669
G1 F10495.651
G1 X178.917 Y207.283 E.00729
;PATH_TASK id=698 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.499932
G1 F9846.583
G1 X178.746 Y207.396 E.00777
G1 X179.212 Y207.439 E.01778
;PATH_TASK id=699 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.449999
G1 F11054.364
G1 X180.843 Y207.439 E.0552
G1 X181.224 Y207.402 E.01295
G1 X180.693 Y207.089 E.02085
G1 X180.128 Y206.643 E.02437
G1 X179.592 Y206.06 E.02681
;PATH_TASK id=700 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X179.941 Y205.777 F24000
G1 X179.972 Y205.815
G1 X180.167 Y206.038
G1 X180.302 Y206.182
G1 X180.433 Y206.313
G1 X180.565 Y206.435
G1 X180.725 Y206.567
G1 X180.875 Y206.676
G1 X181.028 Y206.774
G1 X181.188 Y206.862
G1 X181.399 Y206.957
G1 X181.553 Y207.01
G1 X181.723 Y207.051
G1 X181.894 Y207.073
G1 X182.65 Y207.103
G1 X182.727 Y202.563
G1 X180.916 Y202.532
G1 X180.915 Y202.941
G1 X180.46 Y202.941
;WIDTH:0.487787
G1 F10115.39
G1 X180.536 Y202.819 E.00529
;PATH_TASK id=701 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.44584
G1 F11168.47
G1 X180.612 Y202.698 E.00479
;PATH_TASK id=702 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.399822
G1 F12000
G3 X180.835 Y202.424 I.752 J.386 E.01056
;PATH_TASK id=703 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X183.939 Y201.147 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X182.743 Y202.343 E.05725
G1 X182.995 Y202.558 E.01121
G1 X183.168 Y203.09 E.01894
G1 X183.11 Y206.53 E.11645
G1 X183.027 Y206.895 E.01266
G1 X182.716 Y207.315 E.01769
G1 X182.635 Y207.394 E.00383
G1 X182.812 Y207.439 E.00619
G1 X183.939 Y207.439 E.03815
G1 X183.939 Y201.187 E.21165
;PATH_TASK id=704 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X183.486 Y206.986 F24000
;WIDTH:0.52397
G1 F9354.537
G1 X183.505 Y206.761 E.009
;PATH_TASK id=705 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.485066
G1 F10177.633
G1 X183.524 Y206.537 E.00827
;PATH_TASK id=706 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.451132
G1 F11023.683
G1 X183.539 Y204.829 E.05798
;PATH_TASK id=707 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.422168
G1 F11865.587
G1 X183.553 Y203.121 E.05387
;PATH_TASK id=708 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.430918
G1 F11598.02
G1 X183.53 Y202.95 E.00557
;PATH_TASK id=709 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.47738
G1 F10357.691
G1 X183.507 Y202.779 E.00624
;PATH_TASK id=710 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.523843
G1 F9357.021
G1 X183.484 Y202.608 E.0069
;PATH_TASK id=711 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.570305
G1 F8532.67
G1 X183.461 Y202.437 E.00757
;PATH_TASK id=712 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.593536
G1 F8172.665
G1 X183.451 Y202.384 E.00244
;PATH_TASK id=713 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X183.57 Y153.362 F24000
;WIDTH:0.369016
G1 F12000
G1 X183.57 Y152.93 E.01171
G1 X183.029 Y152.92 E.01467
;PATH_TASK id=714 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.379829
G1 X182.962 Y152.945 E.00199
;PATH_TASK id=715 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.428715
G1 F11664.241
G1 X182.896 Y152.969 E.00228
;PATH_TASK id=716 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.477601
G1 F10352.439
G1 X182.829 Y152.994 E.00257
;PATH_TASK id=717 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.526486
G1 F9305.868
G1 X182.763 Y153.018 E.00285
;PATH_TASK id=718 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.575372
G1 F8451.474
G1 X182.696 Y153.043 E.00314
;PATH_TASK id=719 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.624258
G1 F7740.774
G1 X182.629 Y153.067 E.00343
;PATH_TASK id=720 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X182.695 Y153.095 E.00343
;PATH_TASK id=721 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.575372
G1 F8451.474
G1 X182.76 Y153.122 E.00314
;PATH_TASK id=722 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.526486
G1 F9305.868
G1 X182.825 Y153.15 E.00285
;PATH_TASK id=723 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.477601
G1 F10352.439
G1 X182.891 Y153.177 E.00257
;PATH_TASK id=724 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.428715
G1 F11664.241
G1 X182.956 Y153.205 E.00228
;PATH_TASK id=725 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.367253
G1 F12000
G1 X183.022 Y153.233 E.00191
G1 X183.359 Y153.255 E.00911
G1 X183.534 Y153.344 E.00531
;PATH_TASK id=726 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X182.178 Y153.065 F24000
;WIDTH:0.644378
G1 F7481.819
G1 X182.589 Y153.067 E.02058
;PATH_TASK id=727 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X181.123 Y153.664 F24000
;WIDTH:0.590275
G1 F8221.363
G1 X181.362 Y153.422 E.01546
G1 X181.857 Y153.152 E.02566
;PATH_TASK id=728 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.617493
G1 F7831.907
G1 X182.178 Y153.065 E.01588
G1 X181.553 Y153.036 E.02989
;PATH_TASK id=729 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.587294
G1 F8266.376
G1 X179.758 Y153.036 E.08122
G1 X179.716 Y153.079 E.00272
G1 X180.386 Y153.262 E.03145
G1 X180.939 Y153.547 E.02816
G1 X181.089 Y153.642 E.00806
;PATH_TASK id=730 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X181.304 Y154.447 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X181.484 Y153.974 E.01714
G1 X181.623 Y153.82 E.00701
G1 X181.95 Y153.624 E.01294
G1 X182.31 Y153.559 E.01236
G1 X183.21 Y153.602 E.03052
G1 X183.701 Y153.884 E.01916
G1 X183.873 Y154.102 E.0094
G1 X183.939 Y153.753 E.012
G1 X183.939 Y152.561 E.04038
G1 X179.478 Y152.561 E.151
G1 X179.478 Y152.643 E.0028
G1 X178.459 Y153.663 E.04881
G1 X178.697 Y153.593 E.00839
G1 X179.428 Y153.521 E.02487
G1 X180.258 Y153.72 E.0289
G1 X180.709 Y153.963 E.01733
G1 X181.273 Y154.422 E.02461
;PATH_TASK id=731 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X180.968 Y154.737 F24000
G1 X180.853 Y154.631
G1 X180.721 Y154.518
G1 X180.56 Y154.395
G1 X180.394 Y154.285
G1 X180.221 Y154.189
G1 X180.016 Y154.1
G1 X179.831 Y154.039
G1 X179.644 Y153.996
G1 X179.451 Y153.971
G1 X179.226 Y153.964
G1 X179.069 Y153.973
G1 X178.921 Y153.993
G1 X178.789 Y154.02
G1 X178.63 Y154.066
G1 X178.503 Y154.114
G1 X178.353 Y154.185
G1 X178.235 Y154.253
G1 X178.096 Y154.349
G1 X177.965 Y154.457
G1 X177.866 Y154.551
G1 X177.759 Y154.67
G1 X177.67 Y154.785
G1 X177.606 Y154.882
G1 X177.31 Y154.687
;WIDTH:0.38292
G1 F12000
G1 X177.78 Y154.183 E.01948
;PATH_TASK id=732 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X176.475 Y156.85 F24000
;WIDTH:0.464474
G1 F10674.788
G1 X176.458 Y156.265 E.02051
;PATH_TASK id=733 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X176.496 Y156.942 F24000
;WIDTH:0.48248
G1 F10237.529
G2 X176.486 Y158.713 I54.339 J1.189 E.06474
G1 X176.568 Y158.544 E.00686
G1 X176.866 Y158.19 E.01694
G1 X177.027 Y158.085 E.00701
G1 X176.722 Y157.613 E.02052
G1 X176.508 Y156.979 E.02446
;PATH_TASK id=734 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X176.899 Y162.672 F24000
;WIDTH:0.499137
G1 F9863.727
G1 X177.415 Y162.157 E.02764
G1 X177.106 Y161.629 E.02317
G1 X176.899 Y161.41 E.01143
G1 X176.899 Y162.632 E.04633
;PATH_TASK id=735 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X176.468 Y163.714 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X177.99 Y162.192 E.07287
G3 X177.426 Y161.34 I4.613 J-3.665 E.03461
G2 X176.864 Y160.841 I-1.87 J1.542 E.02556
G1 X176.615 Y160.565 E.01258
G1 X176.468 Y160.29 E.01055
G1 X176.468 Y163.674 E.11453
;PATH_TASK id=736 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X176.061 Y164.697 F24000
G1 F11054.364
G1 X178.598 Y162.159 E.12148
G1 X178.39 Y162.035 E.0082
G1 X178.054 Y161.592 E.01882
G1 X177.798 Y161.144 E.01747
G1 X177.399 Y160.737 E.01929
G1 X177.166 Y160.568 E.00975
G1 X176.876 Y160.223 E.01524
;PATH_TASK id=737 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.469217
G1 F10556.02
G1 X176.831 Y160.144 E.00323
;PATH_TASK id=738 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.507653
G1 F9682.98
G1 X176.787 Y160.064 E.00352
;PATH_TASK id=739 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.546089
G1 F8943.317
G1 X176.743 Y159.985 E.00381
;PATH_TASK id=740 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.600355
G1 F8072.692
G1 X176.698 Y159.905 E.00422
G1 X176.695 Y159.285 E.02874
;PATH_TASK id=741 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.578949
G1 F8395.069
G1 X176.748 Y159.152 E.00637
;PATH_TASK id=742 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.533609
G1 F9170.778
G1 X176.801 Y159.02 E.00583
;PATH_TASK id=743 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.488269
G1 F10104.434
G1 X176.854 Y158.887 E.00529
;PATH_TASK id=744 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.450697
G1 F11035.448
G1 X177.174 Y158.49 E.01729
G1 X177.47 Y158.335 E.01132
G1 X177.771 Y158.259 E.01054
G1 X177.483 Y157.978 E.01364
G1 X177.21 Y157.624 E.01518
G1 X177.084 Y157.382 E.00925
G1 X176.883 Y156.779 E.02154
G1 X176.839 Y155.921 E.02913
G1 X176.93 Y155.347 E.01971
G1 X177.038 Y155.084 E.00964
G1 X176.143 Y155.978 E.0429
G1 X176.061 Y155.978 E.00281
G1 X176.068 Y158.793 E.09542
;PATH_TASK id=745 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.48827
G1 F10104.412
G1 X176.091 Y158.958 E.00618
;PATH_TASK id=746 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.533612
G1 F9170.722
G1 X176.114 Y159.123 E.00681
;PATH_TASK id=747 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.597638
G1 F8112.239
G1 X176.136 Y159.289 E.0077
G1 X176.137 Y159.907 E.02851
;PATH_TASK id=748 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.584525
G1 F8308.639
G1 X176.118 Y160.086 E.00809
;PATH_TASK id=749 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.546089
G1 F8943.317
G1 X176.099 Y160.264 E.00752
;PATH_TASK id=750 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.507653
G1 F9682.98
G1 X176.08 Y160.443 E.00694
;PATH_TASK id=751 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.451638
G1 F11010.058
G1 X176.061 Y160.621 E.00611
G1 X176.061 Y164.657 E.13714
;PATH_TASK id=752 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X176.101 Y152.527 F24000
;WIDTH:0.477226
G1 F10361.358
G2 X176.109 Y152.609 I-.026 J.043 E.00796
;PATH_TASK id=753 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X179.464 Y152.37 F24000
;WIDTH:0.450002
G1 F11054.283
G1 X176 Y155.834 E.16584
G1 X176 Y155.259 E.01949
G1 X178.759 Y152.5 E.13208
G1 X178.183 Y152.5 E.01949
G1 X176 Y154.683 E.10452
G1 X176 Y154.107 E.01949
G1 X177.607 Y152.5 E.07696
G1 X177.032 Y152.5 E.01949
G1 X175.816 Y153.715 E.05817
;PATH_TASK id=754 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X176.598 Y152.357 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.449953
G1 F7200
G1 X175.857 Y153.098 E.03548
;PATH_TASK id=755 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F7200
G1 X176.564 Y152.391 E-.16
;WIPE_END
G1 Z.8 F24000
G1 X176.564 Y152.111 Z.8
G1 X176.946 Y175.723
G1 X176.966 Y175.942
G1 X177.005 Y176.155
G1 X179.29 Y184.116
G1 X179.355 Y183.974
G1 X179.439 Y183.815
G1 X179.512 Y183.702
G1 X179.614 Y183.561
G1 X179.708 Y183.453
G1 X179.836 Y183.322
G1 X179.952 Y183.224
G1 X180.119 Y183.149
G1 X180.263 Y183.115
G1 X180.445 Y183.085
G1 X180.593 Y183.072
G1 X180.76 Y183.066
G1 X180.953 Y183.071
G1 X181.143 Y183.09
G1 X181.323 Y183.122
G1 X181.474 Y183.159
G1 X181.624 Y183.205
G1 X181.81 Y183.278
G1 X181.971 Y183.355
G1 X182.117 Y183.439
G1 X182.247 Y183.525
G1 X182.389 Y183.636
G1 X182.519 Y183.758
G1 X182.614 Y183.861
G1 X182.701 Y183.97
G1 X182.801 Y184.118
G1 X182.893 Y184.286
G1 X182.957 Y184.432
G1 X183.021 Y184.616
G1 X183.059 Y184.769
G1 X183.089 Y184.942
G1 X183.104 Y185.118
G1 X183.107 Y185.284
G1 X183.095 Y185.489
G1 X183.067 Y185.689
G1 X183.033 Y185.845
G1 X182.976 Y186.033
G1 X182.917 Y186.181
G1 X179.955 Y192.777
G1 X180.148 Y195.075
G1 X180.308 Y195.466
G1 X180.125 Y195.657
G1 X180.204 Y195.733
G1 Z.4
G1 E.8 F1800
;TYPE:Outer wall
;WIDTH:0.537622
G1 F9096.384
G1 X179.09 Y194.931 E.05645
G1 X180.217 Y194.95 E.04637
G1 X180.204 Y195.693 E.03055
;PATH_TASK id=756 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F9096.384
G1 X179.379 Y195.129 E-.16
;WIPE_END
G1 Z.8 F24000
G1 X179.351 Y195.206 Z.8
G1 X179.583 Y193.446
G1 X180.294 Y187.575
G1 X180.461 Y185.565
G1 X180.55 Y185.462
G1 Z.4
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.565016
G1 F8619.105
G1 X180.461 Y185.394 E.00486
G1 X180.444 Y185.2 E.00845
G1 X180.557 Y185.071 E.00745
;PATH_TASK id=757 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.565896
G1 F8604.602
G1 X180.801 Y185.019 E.01086
G1 X181.171 Y185.106 E.01653
;PATH_TASK id=758 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.563268
G1 F8648.059
G1 X181.268 Y185.252 E.00759
;PATH_TASK id=759 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X181.214 Y185.402 E.00692
G1 X180.995 Y185.525 E.01084
;PATH_TASK id=756 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.565016
G1 F8619.105
G1 X180.643 Y185.533 E.01531
G1 X180.582 Y185.487 E.00331
;PATH_TASK id=760 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
M204 T2500
G1 X180.517 Y185.603 F24000
G1 X180.472 Y185.574
G1 X180.472 Y185.574
G1 X180.235 Y185.875
M204 P2500
;TYPE:Outer wall
;WIDTH:0.449999
G1 F10200
G1 X180.028 Y185.638 E.01067
G1 X179.942 Y185.365 E.00966
G1 X179.968 Y185.057 E.01048
G1 X180.106 Y184.806 E.00968
G1 X180.333 Y184.63 E.00973
G1 X180.75 Y184.535 E.0145
G1 X181.258 Y184.602 E.01732
G1 X181.478 Y184.72 E.00846
G3 X181.724 Y185.069 I-.831 J.849 E.01454
G1 X181.753 Y185.271 E.00693
G1 X181.695 Y185.533 E.00906
G1 X181.501 Y185.812 E.01151
G1 X181.298 Y185.924 E.00786
G1 X181.005 Y186.019 E.01042
G1 X180.512 Y186.01 E.01669
G1 X180.271 Y185.893 E.00905
;PATH_TASK id=761 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X180.028 Y185.638 E-.05637
G1 X179.942 Y185.365 E-.04566
G1 X179.968 Y185.057 E-.04955
G1 X179.993 Y185.011 E-.00842
;WIPE_END
G1 Z.8 F24000
G1 X180.345 Y185.136 Z.8
G1 X179.818 Y183.34
G1 X179.217 Y177.586
G1 X179.013 Y175.506
G1 X178.999 Y175.508
G1 Z.4
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.365773
G1 F10200
G1 X178.968 Y175.707 E.0054
G1 X178.852 Y175.763 E.00346
G1 X178.722 Y175.714 E.00374
G1 X178.687 Y175.531 E.00499
G1 X178.766 Y175.408 E.00394
M73 P80 R8
G1 X178.918 Y175.392 E.0041
G1 X178.999 Y175.508 E.0038
;PATH_TASK id=762 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
M204 T2500
G1 X179.013 Y175.506 F24000
G1 X178.948 Y175.395
G1 X179.174 Y175.102
M204 P2500
;TYPE:Outer wall
;WIDTH:0.449999
G1 F10200
G1 X179.319 Y175.266 E.00741
G1 X179.388 Y175.508 E.00854
G1 X179.341 Y175.853 E.01178
G1 X179.213 Y176.024 E.00724
G1 X179.025 Y176.131 E.00733
G1 X178.796 Y176.159 E.0078
G1 X178.589 Y176.104 E.00724
G1 X178.419 Y175.966 E.00742
G1 X178.316 Y175.778 E.00723
G1 X178.311 Y175.442 E.01139
G1 X178.407 Y175.225 E.00803
G1 X178.561 Y175.08 E.00718
G1 X178.767 Y175.002 E.00744
G1 X178.967 Y175.008 E.0068
G1 X179.138 Y175.085 E.00634
;PATH_TASK id=763 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X179.319 Y175.266 E-.04093
G1 X179.388 Y175.508 E-.04035
G1 X179.341 Y175.853 E-.05569
G1 X179.255 Y175.968 E-.02304
;WIPE_END
G1 Z.8 F24000
G1 X178.969 Y175.729 Z.8
G1 X180.766 Y175.785
G1 X180.882 Y175.736
G1 Z.4
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.588434
G1 F8249.101
G1 X180.887 Y175.49 E.01115
G1 X181.013 Y175.351 E.00851
G1 X181.303 Y175.357 E.01314
G1 X181.371 Y175.426 E.00437
G1 X181.417 Y175.554 E.0062
G1 X181.364 Y175.796 E.01121
G1 X181.225 Y175.878 E.00731
G1 X181.004 Y175.865 E.01007
G1 X180.909 Y175.765 E.00627
;PATH_TASK id=764 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
M204 T2500
G1 X180.788 Y175.832 F24000
G1 X180.78 Y175.818
G1 X180.763 Y175.777
G1 X180.404 Y175.909
M204 P2500
;TYPE:Outer wall
;WIDTH:0.449999
G1 F10200
G1 X180.358 Y175.59 E.01091
G1 X180.424 Y175.277 E.0108
G1 X180.541 Y175.089 E.00751
G1 X180.785 Y174.897 E.01049
G1 X181.064 Y174.821 E.0098
G1 X181.372 Y174.864 E.01051
G1 X181.576 Y174.937 E.00732
G1 X181.76 Y175.116 E.0087
G1 X181.885 Y175.347 E.00889
G1 X181.908 Y175.789 E.01498
G1 X181.78 Y176.087 E.01096
G1 X181.634 Y176.239 E.00715
G1 X181.347 Y176.37 E.01067
G1 X181.01 Y176.389 E.01142
G1 X180.745 Y176.306 E.00941
G1 X180.56 Y176.163 E.0079
G1 X180.425 Y175.943 E.00877
;PATH_TASK id=765 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X180.358 Y175.59 E-.0575
G1 X180.424 Y175.277 E-.05107
G1 X180.541 Y175.089 E-.03552
G1 X180.619 Y175.027 E-.01591
;WIPE_END
G1 Z.8 F24000
G1 X180.867 Y175.303 Z.8
G1 X180.344 Y173.51
G1 X178.505 Y171.518
G1 X177.042 Y169.801
G1 X177.065 Y168.43
G1 X179.355 Y168.067
G1 X178.881 Y166.005
G1 X178.966 Y165.928
G1 Z.4
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.566209
G1 F8599.454
G1 X178.967 Y165.831 E.00419
G1 X179.166 Y165.701 E.01034
G1 X179.69 Y165.619 E.02309
;PATH_TASK id=766 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.590259
G1 F8221.595
G1 X180.196 Y165.617 E.02305
G1 X181.158 Y165.687 E.0439
;PATH_TASK id=767 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.575867
G1 F8443.616
G1 X181.449 Y165.773 E.01343
G1 X181.587 Y165.902 E.00837
;PATH_TASK id=768 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
G1 X181.544 Y165.993 E.00443
G1 X181.202 Y166.121 E.01621
;PATH_TASK id=769 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.578263
G1 F8405.826
G1 X180.719 Y166.167 E.02158
;PATH_TASK id=770 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.590259
G1 F8221.595
G3 X179.678 Y166.141 I-.193 J-13.254 E.04741
;PATH_TASK id=765 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
;WIDTH:0.566209
G1 F8599.454
G1 X179.212 Y166.055 E.0206
G1 X179.001 Y165.946 E.01033
;PATH_TASK id=771 conformal=0 surface=-1 source_layer=1 shell_offset=-1.000000
M204 T2500
G1 X178.927 Y166.046 F24000
G1 X178.865 Y165.984
G1 X178.865 Y165.984
G1 X178.548 Y166.199
M204 P2500
;TYPE:Outer wall
;WIDTH:0.449999
G1 F10200
G1 X178.467 Y166.001 E.00723
G1 X178.472 Y165.74 E.00881
G1 X178.567 Y165.537 E.00759
G1 X178.795 Y165.33 E.01043
G1 X179.03 Y165.23 E.00864
G1 X179.627 Y165.134 E.02046
G1 X180.216 Y165.119 E.01995
G1 X181.223 Y165.199 E.03419
G1 X181.569 Y165.296 E.01216
G1 X181.769 Y165.398 E.0076
G1 X181.986 Y165.606 E.01018
G1 X182.071 Y165.82 E.0078
G1 X182.065 Y166.045 E.00762
G1 X181.96 Y166.259 E.00807
G1 X181.74 Y166.452 E.0099
G1 X181.33 Y166.596 E.01472
G1 X180.829 Y166.656 E.01708
G3 X179.641 Y166.627 I-.405 J-7.705 E.04025
G1 X179.114 Y166.531 E.01812
G1 X178.722 Y166.371 E.01434
G1 X178.576 Y166.227 E.00694
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
M106 S255
;LAYER_CHANGE
;Z:0.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;0.6
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X178.467 Y166.001 E-.04015
G1 X178.472 Y165.74 E-.04165
G1 X178.567 Y165.537 E-.03588
G1 X178.763 Y165.359 E-.04232
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;0.6
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=772 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
M204 T5000
M486 S0
G1 Z1 F24000
G1 X178.986 Y165.663 Z1
G1 X178.929 Y167.984
G1 X177.065 Y168.43
G1 X176.946 Y175.48
G1 X176.945 Y175.681
G1 X176.96 Y175.898
G1 X176.996 Y176.112
G1 X177.051 Y176.321
G1 X177.129 Y176.521
G1 X180.448 Y183.085
G1 X180.594 Y183.072
G1 X180.773 Y183.066
G1 X180.953 Y183.071
G1 X181.143 Y183.09
G1 X181.323 Y183.122
G1 X181.477 Y183.159
G1 X181.659 Y183.218
G1 X181.813 Y183.279
G1 X181.971 Y183.355
G1 X182.117 Y183.439
G1 X182.247 Y183.525
G1 X182.386 Y183.634
G1 X182.492 Y183.731
G1 X182.612 Y183.858
G1 X182.701 Y183.97
G1 X182.801 Y184.118
G1 X182.893 Y184.286
G1 X182.956 Y184.428
G1 X183.008 Y184.575
G1 X183.059 Y184.767
G1 X183.091 Y184.964
G1 X183.104 Y185.12
G1 X183.107 Y185.284
G1 X183.095 Y185.489
G1 X183.067 Y185.689
G1 X183.033 Y185.845
G1 X182.976 Y186.033
G1 X182.917 Y186.181
G1 X182.83 Y186.356
G1 X182.749 Y186.489
G1 X182.658 Y186.616
G1 X182.531 Y186.767
G1 X182.421 Y186.878
G1 X182.299 Y186.987
G1 X182.161 Y187.09
G1 X182.035 Y187.171
G1 X181.908 Y187.24
G1 X181.739 Y187.317
G1 X181.567 Y187.381
G1 X181.418 Y187.427
G1 X181.272 Y187.465
G1 X181.085 Y187.503
G1 X180.927 Y187.528
G1 X180.701 Y187.554
G1 X180.358 Y187.575
G1 X180.168 Y187.576
G1 X180.494 Y192.786
G1 X180.495 Y192.752
G1 Z.6
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
G1 F10200
G1 X180.245 Y192.786 E.00856
G1 X179.99 Y192.976 E.01076
G1 X179.858 Y193.408 E.01527
G1 X177.229 Y193.363 E.089
G1 X176.995 Y193.405 E.00805
G1 X176.738 Y193.597 E.01086
G1 X176.608 Y193.963 E.01314
G1 X176.608 Y194.646 E.0231
G1 X176.849 Y195.033 E.01546
G1 X180.136 Y197.433 E.13774
G1 X180.429 Y197.508 E.01023
G1 X181.204 Y197.501 E.02624
G1 X181.503 Y197.327 E.01173
G1 X181.621 Y197.146 E.0073
G1 X181.669 Y196.919 E.00786
G1 X181.695 Y195.36 E.05276
G1 X182.282 Y195.37 E.01985
G1 X182.518 Y195.327 E.00811
G1 X182.774 Y195.135 E.01084
G1 X182.903 Y194.77 E.0131
G1 X182.915 Y194.071 E.02369
G1 X182.835 Y193.759 E.01088
G1 X182.642 Y193.552 E.00959
G1 X182.387 Y193.455 E.00925
G1 X181.728 Y193.44 E.02231
G1 X181.646 Y193.058 E.01322
G1 X181.399 Y192.822 E.01157
G1 X181.204 Y192.76 E.00691
G1 X180.555 Y192.744 E.02199
G1 X180.535 Y192.747 E.00068
;PATH_TASK id=773 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
M204 T2500
G1 X180.534 Y192.787 F24000
G1 X180.554 Y192.787
G1 X180.547 Y193.173
M204 P2500
;TYPE:Outer wall
G1 F10200
G1 X180.372 Y193.2 E.00602
G1 X180.288 Y193.35 E.00581
G1 X180.28 Y193.844 E.0167
G1 X177.222 Y193.792 E.10351
G1 X177.076 Y193.861 E.00549
G1 X177.037 Y193.971 E.00392
G1 X177.027 Y194.537 E.01918
G1 X177.102 Y194.687 E.00568
G1 X180.332 Y197.045 E.13535
G1 X180.436 Y197.08 E.00372
G1 X181.146 Y197.068 E.02404
G1 X181.238 Y196.94 E.00532
G1 X181.274 Y194.925 E.06822
G1 X182.289 Y194.942 E.03436
G1 X182.436 Y194.872 E.0055
G1 X182.474 Y194.763 E.00391
G1 X182.462 Y193.97 E.02683
G1 X182.342 Y193.882 E.00505
G1 X181.292 Y193.861 E.03555
G1 X181.276 Y193.273 E.0199
G1 X181.15 Y193.185 E.0052
G1 X180.587 Y193.174 E.01904
;PATH_TASK id=774 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X180.372 Y193.2 E-.0348
G1 X180.288 Y193.35 E-.02748
G1 X180.28 Y193.844 E-.07892
G1 X180.162 Y193.842 E-.0188
;WIPE_END
G1 X179.901 Y193.451 F24000
G1 X176.936 Y186.018
G1 X176.872 Y185.833
G1 X176.825 Y185.638
G1 X176.795 Y185.439
G1 X176.781 Y185.235
G1 X176.785 Y184.997
G1 X176.809 Y184.779
G1 X176.847 Y184.588
G1 X176.912 Y184.374
G1 X176.99 Y184.191
G1 X177.085 Y184.021
G1 X177.197 Y183.862
G1 X177.34 Y183.699
G1 X177.486 Y183.566
G1 X177.611 Y183.472
G1 X177.722 Y183.401
G1 X177.861 Y183.326
G1 X178.008 Y183.262
G1 X178.153 Y183.212
G1 X178.281 Y183.177
G1 X178.437 Y183.144
G1 X178.972 Y183.346
G1 X178.92 Y184.019
G1 X178.755 Y185.956
G1 X179.366 Y185.959
G1 X179.322 Y185.924
G1 X179.212 Y186.061
G1 E.8 F1800
G1 F10200
G1 X179.025 Y186.036 E.0064
G1 X178.622 Y185.881 E.01461
G1 X178.373 Y185.703 E.01036
G1 X178.205 Y185.479 E.00946
G1 X178.136 Y185.245 E.00828
G1 X178.18 Y184.925 E.01091
G1 X178.337 Y184.723 E.00868
;PATH_TASK id=775 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.463327
G1 X178.715 Y184.577 E.01415
;PATH_TASK id=776 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.503948
G1 F9760.795
G1 X178.805 Y184.55 E.0036
;PATH_TASK id=777 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.544569
G1 F8970.415
G1 X178.895 Y184.523 E.00392
;PATH_TASK id=778 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.58519
G1 F8298.449
G1 X178.985 Y184.496 E.00424
G1 X178.974 Y184.732 E.01062
;PATH_TASK id=779 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.540127
G1 F9050.568
G1 X178.963 Y184.967 E.00973
;PATH_TASK id=780 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.495063
G1 F9952.61
G1 X178.952 Y185.202 E.00885
;PATH_TASK id=781 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.449999
G1 F10200
G1 X179.03 Y185.679 E.01637
G1 X179.195 Y186.025 E.01297
;PATH_TASK id=782 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X179.025 Y186.036 E-.02733
G1 X178.622 Y185.881 E-.06907
G1 X178.373 Y185.703 E-.04899
G1 X178.318 Y185.63 E-.01461
;WIPE_END
G1 X178.45 Y185.558 F24000
G1 X178.454 Y185.554
G1 X178.87 Y184.468
G1 X178.92 Y184.019
G1 X178.972 Y183.346
G1 X178.666 Y183.231
G1 X178.721 Y183.086
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
G1 F10200
G1 X178.564 Y183.085 E.00531
G1 X177.909 Y183.263 E.02297
G1 X177.391 Y183.599 E.0209
G1 X177.004 Y184.087 E.0211
G1 X176.791 Y184.667 E.02089
G1 X176.746 Y185.312 E.02189
G1 X176.865 Y185.933 E.02141
G1 X177.169 Y186.514 E.02219
G1 X177.616 Y186.965 E.02151
G1 X178.096 Y187.25 E.01889
G1 X178.726 Y187.466 E.02254
G1 X179.508 Y187.593 E.02681
G1 X180.389 Y187.616 E.02984
G1 X181.086 Y187.538 E.02374
G1 X181.651 Y187.393 E.01974
G1 X182.26 Y187.064 E.02339
G1 X182.745 Y186.56 E.0237
G1 X183.036 Y185.976 E.0221
G1 X183.14 Y185.43 E.01881
G1 X183.12 Y184.885 E.01847
G1 X182.951 Y184.324 E.01983
G1 X182.577 Y183.764 E.0228
G1 X182.063 Y183.363 E.02207
G1 X181.566 Y183.146 E.01834
G1 X181.218 Y183.077 E.01203
G1 X180.698 Y183.028 E.01766
G1 X180.093 Y183.112 E.02068
G1 X179.583 Y183.331 E.01879
G1 X179.283 Y183.55 E.01256
G2 X179.131 Y183.247 I-.474 J.048 E.01173
G1 X178.849 Y183.087 E.01096
G1 X178.761 Y183.086 E.00299
;PATH_TASK id=783 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
M204 T2500
G1 X178.702 Y183.244 F24000
G1 X178.784 Y183.275
G1 X178.7 Y183.498
M204 P2500
;TYPE:Outer wall
G1 F10200
G1 X178.174 Y183.614 E.01822
G1 X177.758 Y183.846 E.01614
G1 X177.431 Y184.202 E.01637
G1 X177.23 Y184.656 E.01681
G1 X177.168 Y185.203 E.01861
G1 X177.238 Y185.705 E.01717
G1 X177.452 Y186.176 E.0175
G1 X177.807 Y186.572 E.01801
G1 X178.206 Y186.83 E.01608
G1 X178.763 Y187.035 E.02008
G1 X179.537 Y187.165 E.02658
G1 X180.334 Y187.189 E.02699
G1 X180.88 Y187.145 E.01852
G1 X181.464 Y187.007 E.02032
G1 X181.963 Y186.755 E.01894
G1 X182.335 Y186.4 E.01739
G1 X182.6 Y185.932 E.01819
G1 X182.708 Y185.473 E.01597
G1 X182.709 Y185.032 E.01491
G1 X182.584 Y184.545 E.01703
G1 X182.299 Y184.091 E.01814
G1 X181.892 Y183.755 E.01787
G1 X181.346 Y183.526 E.02004
G1 X180.775 Y183.452 E.0195
G1 X180.229 Y183.519 E.01864
G1 X179.755 Y183.723 E.01745
G1 X179.412 Y184 E.01492
;PATH_TASK id=784 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.493714
G1 F9982.386
G1 X179.274 Y184.152 E.00768
;PATH_TASK id=785 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.537429
G1 F9099.935
G1 X179.137 Y184.304 E.00843
;PATH_TASK id=786 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.581144
G1 F8360.831
G1 X178.999 Y184.456 E.00918
;PATH_TASK id=787 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X178.989 Y184.359 E.00438
;PATH_TASK id=788 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.546866
G1 F8929.528
G1 X178.936 Y184.014 E.01463
;PATH_TASK id=789 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.498433
G1 F9878.982
G1 X178.882 Y183.669 E.01322
;PATH_TASK id=783 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.449999
G1 F10200
G1 X178.829 Y183.551 E.00438
G1 X178.737 Y183.513 E.00337
;PATH_TASK id=790 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X178.174 Y183.614 E-.09144
G1 X177.8 Y183.822 E-.06856
;WIPE_END
G1 X177.564 Y183.508 F24000
G1 X177.611 Y183.472
G1 X177.722 Y183.401
G1 X177.861 Y183.326
G1 X178.008 Y183.262
G1 X178.153 Y183.212
G1 X178.281 Y183.177
G1 X178.437 Y183.144
G1 X178.972 Y183.346
G1 X178.92 Y184.019
G1 X178.87 Y184.468
G1 X178.384 Y185.094
G1 X178.382 Y185.135
G1 X178.565 Y185.145
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.41362
G1 F10200
G1 X178.495 Y185.185 E.00247
G1 X178.565 Y185.225 E.00247
G1 X178.588 Y185.185 E.00143
;PATH_TASK id=791 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 E-.75741 F2100
;WIPE_START
G1 F10200
G1 X178.565 Y185.225 E-.00954
G1 X178.495 Y185.185 E-.01652
G1 X178.565 Y185.145 E-.01652
;WIPE_END
G1 X178.382 Y185.135 F24000
G1 X178.87 Y184.468
G1 X178.92 Y184.019
G1 X178.972 Y183.346
G1 X178.854 Y183.301
G1 X179.863 Y177.436
G1 X179.779 Y177.396
G1 E.8 F1800
;WIDTH:0.449999
G1 F10200
G1 X180.052 Y177.625 E.01205
G1 X180.555 Y177.835 E.01846
G1 X181.073 Y177.903 E.01769
G1 X181.584 Y177.862 E.01736
G1 X182.076 Y177.699 E.01756
G1 X182.508 Y177.421 E.01738
G1 X182.88 Y177.026 E.01835
G1 X183.137 Y176.559 E.01805
G1 X183.279 Y176.02 E.01888
G1 X183.291 Y175.267 E.0255
G1 X183.114 Y174.595 E.0235
G1 X182.765 Y174.041 E.02215
G1 X182.331 Y173.661 E.01955
G1 X181.76 Y173.395 E.02132
G1 X181.217 Y173.316 E.01857
G1 X180.523 Y173.398 E.02367
G1 X180.053 Y173.623 E.01762
G1 X179.841 Y173.793 E.0092
G2 X179.413 Y173.565 I-.787 J.962 E.01651
G1 X178.897 Y173.474 E.01775
G1 X178.374 Y173.54 E.01785
G1 X178.175 Y173.603 E.00705
G1 X177.644 Y173.915 E.02086
G1 X177.24 Y174.37 E.02057
G1 X176.994 Y174.919 E.02039
G1 X176.903 Y175.506 E.02009
G1 X176.95 Y176.098 E.02011
G1 X177.147 Y176.64 E.01953
G1 X177.49 Y177.109 E.01966
G1 X177.981 Y177.465 E.02053
G1 X178.586 Y177.648 E.02139
G1 X178.79 Y177.662 E.00695
G1 X179.326 Y177.606 E.01824
G1 X179.743 Y177.413 E.01554
;PATH_TASK id=792 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
M204 T2500
G1 X179.626 Y177.444 F24000
G1 X179.626 Y177.444
G1 X179.621 Y176.793
G1 X179.813 Y176.732
G1 X179.829 Y176.78
M204 P2500
;TYPE:Outer wall
G1 F10200
G1 X179.884 Y176.883 E.00395
G1 X180.248 Y177.239 E.01724
G1 X180.617 Y177.41 E.01375
G1 X180.903 Y177.461 E.00984
G1 X181.421 Y177.458 E.01754
G1 X181.816 Y177.348 E.01387
G1 X182.172 Y177.144 E.01389
G1 X182.483 Y176.843 E.01467
G1 X182.708 Y176.477 E.01454
G1 X182.848 Y176.024 E.01604
G1 X182.877 Y175.399 E.0212
G1 X182.762 Y174.861 E.01861
G1 X182.501 Y174.392 E.01818
G1 X182.177 Y174.072 E.01541
G1 X181.78 Y173.859 E.01527
G1 X181.293 Y173.742 E.01693
G1 X180.674 Y173.803 E.02106
G1 X180.229 Y174.016 E.0167
G1 X179.859 Y174.402 E.01809
G1 X179.778 Y174.282 E.0049
G1 X179.397 Y174.013 E.0158
G1 X178.921 Y173.906 E.01649
G1 X178.433 Y173.964 E.01665
G1 X177.996 Y174.18 E.0165
G1 X177.656 Y174.517 E.0162
G1 X177.416 Y174.992 E.018
G1 X177.331 Y175.506 E.01765
G1 X177.37 Y176.007 E.017
G1 X177.546 Y176.486 E.01729
G1 X177.822 Y176.838 E.01513
G1 X178.216 Y177.107 E.01614
G1 X178.686 Y177.231 E.01647
G1 X179.171 Y177.201 E.01643
G1 X179.507 Y177.066 E.01225
G1 X179.799 Y176.807 E.01322
;PATH_TASK id=793 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X179.884 Y176.883 E-.01833
G1 X180.248 Y177.239 E-.08149
G1 X180.589 Y177.398 E-.06019
;WIPE_END
G1 X180.465 Y177.767 F24000
G1 X180.504 Y177.78
G1 X180.727 Y177.833
G1 X180.97 Y177.862
G1 X181.221 Y177.865
G1 X181.367 Y177.855
G1 X181.511 Y177.836
G1 X181.724 Y177.789
G1 X181.862 Y177.745
G1 X181.998 Y177.692
G1 X182.196 Y177.592
G1 X182.314 Y177.518
G1 X182.428 Y177.435
G1 X182.567 Y177.318
G1 X182.688 Y177.198
G1 X182.803 Y177.064
G1 X182.905 Y176.921
G1 X182.995 Y176.77
G1 X183.072 Y176.613
G1 X183.13 Y176.464
G1 X183.181 Y176.305
G1 X183.228 Y176.097
G1 X183.253 Y175.921
G1 X183.269 Y175.717
G1 X183.271 Y175.545
G1 X183.261 Y175.353
G1 X183.244 Y175.196
G1 X183.211 Y175.016
G1 X183.163 Y174.835
G1 X183.114 Y174.694
G1 X183.041 Y174.526
G1 X182.971 Y174.395
G1 X182.873 Y174.241
G1 X182.783 Y174.122
G1 X182.662 Y173.987
G1 X182.531 Y173.861
G1 X182.39 Y173.747
G1 X182.266 Y173.663
G1 X182.115 Y173.576
G1 X181.952 Y173.502
G1 X181.819 Y173.454
G1 X181.684 Y173.415
G1 X181.507 Y173.378
G1 X181.324 Y173.357
G1 X181.141 Y173.35
G1 X180.962 Y173.357
G1 X180.811 Y173.375
G1 X180.665 Y173.403
G1 X180.521 Y173.443
G1 X180.381 Y173.493
G1 X180.245 Y173.555
G1 X180.244 Y173.556
M73 P80 R7
G1 X180.167 Y171.215
G1 X180.041 Y171.298
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
G1 F10200
G1 X180.1 Y171.227 E.00312
G1 X180.104 Y170.718 E.01725
G1 X179.942 Y170.358 E.01337
G1 X182.688 Y170.404 E.09296
G1 X182.95 Y170.358 E.009
G1 X183.202 Y170.165 E.01074
G1 X183.327 Y169.805 E.01292
G1 X183.339 Y169.105 E.02369
G1 X183.261 Y168.794 E.01084
G1 X183.004 Y168.549 E.01201
G1 X182.739 Y168.484 E.00923
G2 X181.525 Y168.468 I-1.658 J82.105 E.0411
;PATH_TASK id=794 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.439745
G1 X180.909 Y168.481 E.02032
;PATH_TASK id=795 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.394298
G1 X180.23 Y168.477 E.01984
;PATH_TASK id=796 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.404823
G1 X179.34 Y168.449 E.02679
;PATH_TASK id=797 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.449999
G1 X178.823 Y168.417 E.01753
G1 X177.563 Y168.4 E.04266
G1 X177.258 Y168.518 E.01106
G1 X177.087 Y168.715 E.00883
G1 X177.013 Y168.997 E.00988
G1 X177.005 Y169.461 E.0157
G1 X177.081 Y169.766 E.01065
G1 X177.268 Y169.973 E.00943
G1 X177.675 Y170.293 E.01753
G1 X178.022 Y170.705 E.01824
G1 X178.396 Y171.351 E.02525
G1 X178.629 Y171.521 E.00978
;PATH_TASK id=793 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X178.929 Y171.568 E.01028
G1 X179.638 Y171.572 E.024
G1 X179.903 Y171.464 E.00968
G1 X180.016 Y171.329 E.00595
;PATH_TASK id=798 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
M204 T2500
G1 X180.173 Y171.225 F24000
G1 X179.959 Y170.9
G1 X179.696 Y171.073
M204 P2500
;TYPE:Outer wall
G1 F10200
G1 X179.713 Y170.894 E.0061
G1 X179.446 Y170.298 E.0221
G1 X179.214 Y169.917 E.0151
G1 X182.714 Y169.976 E.11847
G1 X182.862 Y169.905 E.00555
G1 X182.899 Y169.797 E.00385
G1 X182.887 Y169.005 E.02682
G1 X182.761 Y168.915 E.00524
G1 X177.626 Y168.826 E.17383
G1 X177.514 Y168.862 E.00398
G1 X177.441 Y169.004 E.00543
G1 X177.456 Y169.559 E.01878
G1 X177.87 Y169.869 E.01752
G1 X178.305 Y170.35 E.02194
G1 X178.763 Y171.109 E.03001
G1 X178.84 Y171.137 E.00277
G1 X179.554 Y171.15 E.02418
G1 X179.661 Y171.092 E.00412
;PATH_TASK id=799 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X179.713 Y170.894 E-.03285
G1 X179.446 Y170.298 E-.10448
G1 X179.372 Y170.177 E-.02266
;WIPE_END
G1 X179.329 Y170.232 F24000
G1 X179.416 Y170.299
G1 X179.613 Y170.454
G1 X179.762 Y170.602
G1 X180.388 Y171.55
G1 X178.505 Y171.518
G1 X177.042 Y169.801
G1 X177.109 Y165.877
G1 X177.114 Y165.717
G1 X177.135 Y165.521
G1 X177.171 Y165.337
G1 X177.215 Y165.183
G1 X177.273 Y165.028
G1 X177.351 Y164.868
G1 X177.446 Y164.71
G1 X177.539 Y164.583
G1 X177.64 Y164.466
G1 X177.751 Y164.358
G1 X177.798 Y164.318
G1 X177.786 Y164.304
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
G1 F10200
G1 X177.652 Y164.402 E.00564
G1 X177.281 Y164.92 E.02155
G1 X177.117 Y165.4 E.01716
;PATH_TASK id=800 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X177.07 Y165.806 E.01385
G1 X177.117 Y166.359 E.01877
G1 X177.289 Y166.851 E.01766
G1 X177.436 Y167.077 E.00912
G1 X177.798 Y167.481 E.01836
G1 X178.291 Y167.798 E.01984
G1 X178.866 Y168.012 E.02079
G1 X179.159 Y168.055 E.01002
;PATH_TASK id=801 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.424627
G1 X179.452 Y168.097 E.00939
;PATH_TASK id=802 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.399255
G1 X180.262 Y168.141 E.02404
;PATH_TASK id=803 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.398431
G1 X180.97 Y168.126 E.02093
;PATH_TASK id=804 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.442732
G1 X181.582 Y168.056 E.02047
;PATH_TASK id=799 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.449999
G1 X182.271 Y167.828 E.02457
G1 X182.806 Y167.476 E.02167
G1 X183.188 Y167.012 E.02034
G1 X183.41 Y166.474 E.0197
G1 X183.479 Y165.906 E.01937
G1 X183.419 Y165.387 E.01766
G1 X183.202 Y164.837 E.02004
G1 X182.827 Y164.374 E.02017
G1 X182.367 Y164.045 E.01912
G2 X181.593 Y163.752 I-2.341 J5.012 E.02806
G1 X180.967 Y163.648 E.02147
G1 X180.214 Y163.608 E.02552
G1 X179.601 Y163.628 E.02078
G1 X178.879 Y163.744 E.02475
G1 X178.178 Y164.019 E.02548
G1 X177.819 Y164.28 E.01504
;PATH_TASK id=805 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
M204 T2500
G1 X177.829 Y164.292 F24000
G1 X177.784 Y164.33
G1 X178.033 Y164.626
M204 P2500
;TYPE:Outer wall
G1 F10200
G1 X177.707 Y165.026 E.01747
G1 X177.543 Y165.449 E.01536
G1 X177.496 Y165.855 E.01383
G1 X177.543 Y166.31 E.01548
G1 X177.687 Y166.694 E.01388
G1 X178.001 Y167.092 E.01716
G1 X178.41 Y167.379 E.01691
G1 X178.919 Y167.583 E.01856
G1 X179.457 Y167.692 E.01858
G1 F10080
G1 X180.233 Y167.747 E.02633
G1 F9960
G1 X180.895 Y167.729 E.02242
G1 X181.428 Y167.656 E.01821
G1 F10200
G1 X182.009 Y167.479 E.02056
G1 X182.448 Y167.22 E.01725
G1 X182.766 Y166.882 E.01571
G1 X182.974 Y166.444 E.01641
G1 X183.049 Y165.929 E.01762
G1 X182.994 Y165.44 E.01666
G1 X182.811 Y165.011 E.01579
G1 X182.508 Y164.66 E.0157
G1 X182.13 Y164.402 E.01549
G1 X181.552 Y164.183 E.02092
G1 X180.964 Y164.078 E.02022
G1 X180.24 Y164.037 E.02455
G1 X179.683 Y164.05 E.01886
G1 X179.055 Y164.14 E.02147
G1 X178.461 Y164.347 E.02129
G1 X178.066 Y164.604 E.01595
;PATH_TASK id=806 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X177.707 Y165.026 E-.08859
G1 X177.545 Y165.442 E-.07141
;WIPE_END
G1 X177.165 Y165.367 F24000
G1 X177.207 Y160.092
G1 X177.23 Y158.722
G1 X183.459 Y158.552
G1 X183.492 Y157.64
G1 X183.538 Y154.946
G1 X183.547 Y154.414
G1 X183.568 Y154.414
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.582441
G1 F8340.736
G1 X183.556 Y154.394 E.00103
;PATH_TASK id=807 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.538294
G1 F9084.055
G1 X183.497 Y154.291 E.00489
;PATH_TASK id=808 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.494147
G1 F9972.824
G1 X183.438 Y154.188 E.00445
;PATH_TASK id=809 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.449999
G1 F10200
G1 X183.144 Y154.001 E.01178
G1 X182.986 Y153.977 E.00542
G1 X182.31 Y153.966 E.02288
G1 X182.067 Y154.012 E.00837
G1 X181.832 Y154.184 E.00987
G1 X181.69 Y154.553 E.01339
G1 X181.674 Y155.449 E.03034
G2 X181.098 Y154.807 I-7.654 J6.293 E.02922
G1 X180.512 Y154.315 E.02589
G1 X179.991 Y154.05 E.01979
G1 X179.405 Y153.927 E.02026
G1 X178.704 Y154.003 E.02386
G1 X178.152 Y154.263 E.02067
G1 X177.95 Y154.428 E.00881
G1 X177.586 Y154.843 E.0187
G1 X177.332 Y155.414 E.02115
G1 X177.234 Y156.046 E.02164
G1 X177.277 Y156.674 E.0213
G1 X177.449 Y157.207 E.01896
G1 X177.555 Y157.4 E.00746
G1 X177.953 Y157.884 E.02122
G1 X178.436 Y158.192 E.01937
G1 X178.941 Y158.344 E.01786
;PATH_TASK id=810 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.424924
G1 X179.331 Y158.389 E.01249
;PATH_TASK id=811 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.422629
G1 X179.534 Y158.33 E.00667
;PATH_TASK id=812 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.449999
G1 X179.737 Y158.271 E.00715
G1 X179.938 Y157.937 E.01319
G1 X180.034 Y157.162 E.02644
G1 X179.969 Y156.962 E.00713
;PATH_TASK id=813 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.419086
G1 X179.905 Y156.761 E.00659
;PATH_TASK id=814 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.424171
G1 X179.719 Y156.622 E.00738
;PATH_TASK id=815 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.460168
G1 X179.532 Y156.483 E.00807
;PATH_TASK id=816 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.48871
G1 F10094.438
G1 X179.341 Y156.419 E.00748
;PATH_TASK id=817 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.517252
G1 F9487.026
G1 X179.15 Y156.355 E.00796
G1 X179.091 Y156.189 E.00693
G1 X179.132 Y155.987 E.00813
;PATH_TASK id=818 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X179.2 Y155.92 E.0038
G1 X179.363 Y155.931 E.00644
G1 X179.54 Y156.031 E.00801
;PATH_TASK id=819 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.48871
G1 F10094.438
G1 X179.717 Y156.131 E.00752
;PATH_TASK id=820 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.460168
G1 F10200
G1 X179.97 Y156.368 E.01204
;PATH_TASK id=821 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.427024
G1 X180.223 Y156.605 E.01108
;PATH_TASK id=822 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.42194
G1 X180.503 Y156.968 E.01444
;PATH_TASK id=823 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.449999
G1 X180.783 Y157.33 E.0155
G1 X181.278 Y157.853 E.02438
G1 X181.77 Y158.234 E.02104
G1 X182.293 Y158.47 E.01944
;PATH_TASK id=824 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.41127
G1 X182.467 Y158.494 E.00537
;PATH_TASK id=825 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.405281
G1 X182.527 Y158.523 E.00203
;PATH_TASK id=826 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.448498
G1 X182.588 Y158.552 E.00227
;PATH_TASK id=827 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.491714
G1 F10026.871
G1 X182.649 Y158.582 E.00251
;PATH_TASK id=828 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.534931
G1 F9146.144
G1 X182.709 Y158.611 E.00276
;PATH_TASK id=829 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.578148
G1 F8407.643
G1 X182.77 Y158.641 E.003
;PATH_TASK id=830 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.621364
G1 F7779.491
G1 X182.83 Y158.67 E.00324
G1 X182.766 Y158.694 E.0033
;PATH_TASK id=831 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.578148
G1 F8407.643
G1 X182.702 Y158.717 E.00305
;PATH_TASK id=832 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.534931
G1 F9146.144
G1 X182.637 Y158.741 E.0028
;PATH_TASK id=833 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.491714
G1 F10026.871
G1 X182.573 Y158.764 E.00256
;PATH_TASK id=834 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.448498
G1 F10200
G1 X182.508 Y158.788 E.00231
;PATH_TASK id=835 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.405281
G1 X182.444 Y158.811 E.00206
;PATH_TASK id=836 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.406032
G1 X182.117 Y158.784 E.00992
;PATH_TASK id=837 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.449999
G1 X181.79 Y158.756 E.01112
G2 X179.458 Y158.741 I-1.51 J52.87 E.07894
;PATH_TASK id=838 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.424924
G1 X178.878 Y158.719 E.01844
;PATH_TASK id=839 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.449999
G2 X177.632 Y158.709 I-.717 J11.102 E.04219
G1 X177.393 Y158.834 E.00914
G1 X177.242 Y159.027 E.00828
G1 X177.178 Y159.289 E.00912
G1 X177.17 Y159.752 E.0157
G1 X177.246 Y160.057 E.01065
G1 X177.433 Y160.264 E.00944
G1 X177.848 Y160.592 E.01791
G1 X178.191 Y161.003 E.01813
G1 X178.479 Y161.516 E.01991
G1 X178.666 Y161.74 E.00989
G1 X178.961 Y161.855 E.01069
G2 X179.905 Y161.839 I.382 J-5.381 E.032
G1 X180.162 Y161.672 E.01038
G1 X180.26 Y161.529 E.00587
G1 X180.269 Y161.009 E.01761
G1 X180.108 Y160.649 E.01337
G1 X182.706 Y160.693 E.08795
G1 X183.106 Y160.654 E.01362
G1 X183.363 Y160.462 E.01086
G1 X183.493 Y160.096 E.01314
G1 X183.505 Y159.396 E.02369
G1 X183.383 Y159.019 E.01341
;PATH_TASK id=840 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.497622
G1 F9896.596
G1 X183.279 Y158.935 E.00505
;PATH_TASK id=841 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.545245
G1 F8958.352
G1 X183.175 Y158.852 E.00557
;PATH_TASK id=842 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.592868
G1 F8182.603
G1 X183.071 Y158.768 E.0061
;PATH_TASK id=843 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.64049
G1 F7530.499
G1 X182.968 Y158.684 E.00663
G1 X183.074 Y158.603 E.00663
;PATH_TASK id=844 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.592868
G1 F8182.603
G1 X183.181 Y158.523 E.0061
;PATH_TASK id=845 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.545245
G1 F8958.352
G1 X183.287 Y158.443 E.00557
;PATH_TASK id=846 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.497622
G1 F9896.596
G1 X183.394 Y158.362 E.00505
;PATH_TASK id=847 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.449999
G1 F10200
G1 X183.529 Y157.99 E.01341
G1 X183.537 Y157.48 E.01727
;PATH_TASK id=848 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.499426
G1 F9857.488
G1 X183.564 Y157.38 E.00391
;PATH_TASK id=849 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.548853
G1 F8894.467
G1 X183.59 Y157.281 E.00433
;PATH_TASK id=850 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.59828
G1 F8102.863
G1 X183.616 Y157.181 E.00476
;PATH_TASK id=851 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.647706
G1 F7440.649
G1 X183.643 Y157.082 E.00518
G1 X183.675 Y154.6 E.12483
;PATH_TASK id=852 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.626588
G1 F7709.863
G1 X183.615 Y154.497 E.00576
;PATH_TASK id=806 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.582441
G1 F8340.736
G1 X183.588 Y154.449 E.00249
;PATH_TASK id=853 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
M204 T2500
G1 X183.546 Y154.448 F24000
G1 X183.543 Y154.597
G1 X183.158 Y154.591
M204 P2500
;TYPE:Outer wall
;WIDTH:0.449999
G1 F10200
G1 X183.113 Y154.469 E.0044
G1 X182.979 Y154.406 E.00501
G1 X182.303 Y154.394 E.02289
G1 X182.173 Y154.445 E.00473
G1 X182.118 Y154.569 E.00459
G1 X182.084 Y156.577 E.06798
G1 X181.964 Y156.465 E.00556
G1 X181.255 Y155.615 E.03747
G1 X180.83 Y155.144 E.02147
G1 X180.351 Y154.721 E.02163
G1 X179.936 Y154.485 E.01616
G1 X179.405 Y154.355 E.0185
G1 X178.789 Y154.424 E.02098
G1 X178.353 Y154.642 E.0165
G1 X177.97 Y155.034 E.01855
G1 X177.755 Y155.486 E.01694
G1 X177.665 Y156.016 E.0182
G1 X177.697 Y156.58 E.01912
G1 X177.855 Y157.071 E.01746
G1 F10080
G1 X178.159 Y157.494 E.01763
G1 F10200
G1 X178.569 Y157.784 E.017
G1 X179.07 Y157.948 E.01784
G1 X179.315 Y157.986 E.00839
G1 X179.459 Y157.945 E.00507
G1 X179.519 Y157.845 E.00395
G1 X179.608 Y157.111 E.02503
G1 X179.586 Y157 E.00383
G1 X179.458 Y156.91 E.0053
G1 X179.045 Y156.838 E.01419
G1 X178.808 Y156.684 E.00957
G1 X178.692 Y156.515 E.00694
G1 X178.623 Y156.217 E.01035
G1 X178.659 Y155.885 E.0113
G1 X178.79 Y155.65 E.00911
G1 X179.007 Y155.486 E.00921
G1 X179.271 Y155.435 E.0091
G1 X179.58 Y155.508 E.01075
G1 X179.93 Y155.73 E.01403
G1 X180.454 Y156.264 E.02532
G1 X181.091 Y157.031 E.03375
G1 X181.519 Y157.494 E.02134
G1 X182.032 Y157.896 E.02206
G1 X182.463 Y158.097 E.0161
G1 X182.895 Y158.16 E.01478
G1 X183.014 Y158.134 E.00412
G1 X183.097 Y158.011 E.00502
G1 X183.157 Y154.631 E.11443
;PATH_TASK id=854 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X183.113 Y154.469 E-.02687
G1 X182.979 Y154.406 E-.02378
G1 X182.303 Y154.394 E-.10814
G1 X182.296 Y154.397 E-.00121
;WIPE_END
G1 X182.303 Y154.008 F24000
G1 X183.553 Y154.03
G1 X183.44 Y160.663
G1 X179.927 Y160.893
G1 X180.047 Y161.074
G1 X179.879 Y161.185
G1 E.8 F1800
G1 F10200
G1 X179.611 Y160.589 E.0221
G1 X179.38 Y160.208 E.0151
G1 X182.289 Y160.257 E.0985
G1 X182.949 Y160.255 E.02233
G1 X183.062 Y160.117 E.00603
G1 X183.076 Y159.389 E.02465
G1 X183.04 Y159.277 E.004
G1 X182.913 Y159.205 E.00493
G1 X177.792 Y159.117 E.17338
G1 X177.67 Y159.16 E.00436
G1 X177.606 Y159.296 E.00507
G1 X177.621 Y159.85 E.01878
G3 X178.166 Y160.305 I-3.786 J5.091 E.02402
G1 X178.555 Y160.776 E.02068
G1 X178.886 Y161.362 E.02278
G1 X179.008 Y161.429 E.0047
G1 X179.709 Y161.442 E.02376
G1 X179.847 Y161.383 E.00506
G1 X179.872 Y161.224 E.00543
;PATH_TASK id=855 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X179.611 Y160.589 E-.10989
G1 X179.448 Y160.321 E-.05011
;WIPE_END
G1 X179.478 Y160.353 F24000
G1 X180.639 Y160.571
G1 X181.11 Y160.623
G1 X183.44 Y160.663
G1 X183.538 Y154.946
G1 X183.544 Y154.576
G1 X184.258 Y154.588
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.647706
G1 F7440.649
G1 X184.248 Y157.087 E.12567
G1 X184.272 Y157.187 E.00518
;PATH_TASK id=856 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.59828
G1 F8102.863
G1 X184.297 Y157.287 E.00476
;PATH_TASK id=857 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.548853
G1 F8894.467
G1 X184.322 Y157.387 E.00433
;PATH_TASK id=858 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.499426
G1 F9857.488
G1 X184.346 Y157.487 E.00391
;PATH_TASK id=859 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.449999
G1 F10200
G1 X184.346 Y207.846 E1.70461
G1 X182.727 Y207.846 E.0548
;PATH_TASK id=860 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.489492
G1 F10076.768
G1 X182.569 Y207.827 E.00594
;PATH_TASK id=861 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.528985
G1 F9258.031
G1 X182.41 Y207.807 E.00647
;PATH_TASK id=862 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.568478
G1 F8562.341
G1 X182.251 Y207.787 E.00699
;PATH_TASK id=863 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.60797
G1 F7963.897
G1 X182.092 Y207.767 E.00752
;PATH_TASK id=864 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.636045
G1 F7586.934
G1 X181.587 Y207.753 E.02495
G1 X181.484 Y207.777 E.00517
;PATH_TASK id=865 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.588119
G1 F8253.868
G1 X181.382 Y207.801 E.00475
;PATH_TASK id=866 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.540193
G1 F9049.355
G1 X181.28 Y207.825 E.00433
;PATH_TASK id=867 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.492267
G1 F10014.532
G1 X180.847 Y207.846 E.01621
;PATH_TASK id=868 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.449999
G1 F10200
G1 X175.654 Y207.846 E.17579
G1 X175.654 Y205.899 E.06592
;PATH_TASK id=869 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.49795
G1 F9889.474
G1 X175.678 Y205.716 E.00698
;PATH_TASK id=870 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.5459
G1 F8946.687
G1 X175.701 Y205.533 E.00772
;PATH_TASK id=871 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.59385
G1 F8168.011
G1 X175.725 Y205.35 E.00845
;PATH_TASK id=872 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.6418
G1 F7514.026
G1 X175.749 Y205.167 E.00919
G1 X175.744 Y204.414 E.03751
;PATH_TASK id=873 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.630675
G1 F7656.251
G1 X175.721 Y204.285 E.00638
;PATH_TASK id=874 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.585506
G1 F8293.617
G1 X175.699 Y204.157 E.00589
;PATH_TASK id=875 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.540337
G1 F9046.735
G1 X175.676 Y204.028 E.0054
;PATH_TASK id=876 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.495168
G1 F9950.292
G1 X175.654 Y203.899 E.00491
;PATH_TASK id=877 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.449999
G1 F10200
G1 X175.654 Y152.154 E1.75153
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y153.85 E.05742
;PATH_TASK id=878 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.494129
G1 F9973.221
G1 X184.324 Y154.034 E.00697
;PATH_TASK id=879 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.538258
G1 F9084.715
G1 X184.302 Y154.219 E.00765
;PATH_TASK id=880 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.582387
G1 F8341.571
G1 X184.28 Y154.403 E.00833
;PATH_TASK id=881 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.626516
G1 F7710.814
G1 X184.263 Y154.548 E.00707
;PATH_TASK id=882 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F7710.814
G1 X184.257 Y155.548 E-.16
;WIPE_END
G1 X184.389 Y155.548 F24000
G1 X184.389 Y152.111
G1 X175.611 Y152.111
G1 X175.611 Y207.889
G1 X182.063 Y207.889
G1 X182.063 Y207.187
G1 E.8 F1800
;WIDTH:0.636045
G1 F7586.934
G1 X182.212 Y207.196 E.00735
;PATH_TASK id=883 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.615336
G1 F7861.415
G1 X182.272 Y207.148 E.00365
;PATH_TASK id=884 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.574002
G1 F8473.272
G1 X182.332 Y207.101 E.00339
;PATH_TASK id=885 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.532668
G1 F9188.408
G1 X182.392 Y207.053 E.00312
;PATH_TASK id=886 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.491334
G1 F10035.385
G1 X182.453 Y207.006 E.00286
;PATH_TASK id=887 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.449999
G1 F10200
G1 X182.67 Y206.709 E.01245
G1 X182.703 Y206.523 E.00638
G1 X182.76 Y203.131 E.11483
G1 X182.646 Y202.765 E.01301
G1 X182.396 Y202.562 E.01089
G1 X182.16 Y202.51 E.00816
G1 X181.484 Y202.499 E.02288
G1 X181.228 Y202.551 E.00885
G1 X181.006 Y202.717 E.00938
G1 X180.864 Y203.086 E.01339
G1 X180.848 Y203.982 E.03034
G1 X180.322 Y203.39 E.02682
G1 X179.808 Y202.932 E.02332
G1 X179.319 Y202.644 E.0192
G1 X179.074 Y202.562 E.00876
G1 X178.556 Y202.46 E.01785
G1 X177.915 Y202.531 E.02183
G1 X177.697 Y202.599 E.00772
G1 X177.326 Y202.797 E.01424
G1 X176.87 Y203.221 E.02108
G1 X176.561 Y203.778 E.02156
;PATH_TASK id=888 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.497594
G1 F9897.212
G1 X176.506 Y203.92 E.00577
;PATH_TASK id=889 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.545188
G1 F8959.36
G1 X176.452 Y204.063 E.00637
;PATH_TASK id=890 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.592783
G1 F8183.864
G1 X176.397 Y204.205 E.00698
;PATH_TASK id=891 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.640377
G1 F7531.923
G1 X176.342 Y204.348 E.00758
;PATH_TASK id=892 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X176.322 Y204.625 E.01379
;PATH_TASK id=893 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.6418
G1 F7514.026
G1 X176.348 Y205.148 E.02608
G1 X176.382 Y205.231 E.00451
;PATH_TASK id=894 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.606869
G1 F7979.452
G1 X176.416 Y205.315 E.00424
;PATH_TASK id=895 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.571937
G1 F8506.343
G1 X176.515 Y205.514 E.00976
;PATH_TASK id=896 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.531291
G1 F9214.306
G1 X176.613 Y205.713 E.00901
;PATH_TASK id=897 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.490645
G1 F10050.812
G1 X176.712 Y205.912 E.00826
;PATH_TASK id=898 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.449999
G1 F10200
G1 X177.127 Y206.417 E.02215
G1 X177.61 Y206.725 E.01937
G1 X178.111 Y206.889 E.01785
G1 X178.515 Y206.95 E.01384
G1 X178.828 Y206.864 E.01098
G1 X179.064 Y206.609 E.01175
G1 X179.122 Y206.412 E.00694
G1 X179.208 Y205.695 E.02444
G1 X179.143 Y205.495 E.00713
;PATH_TASK id=899 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.419083
G1 X179.079 Y205.294 E.00659
;PATH_TASK id=900 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.424163
G1 X178.893 Y205.155 E.00738
;PATH_TASK id=901 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.460159
G1 X178.706 Y205.016 E.00807
;PATH_TASK id=902 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.4887
G1 F10094.664
G1 X178.549 Y204.974 E.00603
;PATH_TASK id=903 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.517241
G1 F9487.246
G1 X178.392 Y204.933 E.00641
G1 X178.294 Y204.845 E.0052
G1 X178.283 Y204.562 E.01116
G1 X178.374 Y204.453 E.00564
G1 X178.537 Y204.465 E.00644
G1 X178.714 Y204.564 E.00801
;PATH_TASK id=904 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.4887
G1 F10094.664
G1 X178.891 Y204.664 E.00752
;PATH_TASK id=905 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.460159
G1 F10200
G1 X179.144 Y204.901 E.01204
;PATH_TASK id=906 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.427016
G1 X179.397 Y205.139 E.01108
;PATH_TASK id=907 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.421936
G1 X179.677 Y205.501 E.01444
;PATH_TASK id=908 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.449999
G1 X179.958 Y205.863 E.01551
G1 X180.452 Y206.386 E.02437
G1 X181.065 Y206.841 E.02582
;PATH_TASK id=909 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.496511
G1 F9920.842
G1 X181.205 Y206.921 E.00608
;PATH_TASK id=910 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.543022
G1 F8998.165
G1 X181.344 Y207.002 E.0067
;PATH_TASK id=911 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.589534
G1 F8232.508
G1 X181.484 Y207.082 E.00733
;PATH_TASK id=882 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.636045
G1 F7586.934
G1 X181.624 Y207.163 E.00795
G1 X182.023 Y207.185 E.01973
;PATH_TASK id=912 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
M204 T2500
G1 X182.027 Y207.079 F24000
G1 X182.054 Y207.08
G1 X182.069 Y206.693
M204 P2500
;TYPE:Outer wall
;WIDTH:0.449999
G1 F10200
G1 X182.2 Y206.66 E.00457
G1 X182.271 Y206.544 E.0046
G1 X182.332 Y203.124 E.11578
G1 X182.298 Y203.015 E.00386
G1 X182.223 Y202.954 E.00327
G1 X181.758 Y202.932 E.01576
G1 X181.377 Y202.956 E.01292
G1 X181.292 Y203.102 E.00572
G1 X181.258 Y205.111 E.06801
G1 X181.138 Y204.998 E.00558
G1 X180.429 Y204.148 E.03747
G1 X180.004 Y203.677 E.02147
G1 X179.525 Y203.254 E.02163
G1 X179.096 Y203.011 E.01669
G1 X178.597 Y202.889 E.01739
G1 X177.963 Y202.957 E.02158
G1 X177.527 Y203.175 E.0165
G1 X177.177 Y203.521 E.01666
G1 X176.945 Y203.968 E.01705
G1 X176.839 Y204.549 E.01999
G1 X176.871 Y205.114 E.01916
G1 X177.029 Y205.605 E.01746
G1 F10080
G1 X177.333 Y206.027 E.0176
G1 F10200
G1 X177.743 Y206.318 E.01702
G1 X178.244 Y206.482 E.01784
G1 X178.489 Y206.52 E.00839
G1 X178.609 Y206.496 E.00414
G1 X178.696 Y206.361 E.00544
G1 X178.782 Y205.644 E.02444
G1 X178.76 Y205.533 E.00383
G1 X178.632 Y205.443 E.0053
G1 X178.219 Y205.372 E.01418
G1 X177.982 Y205.217 E.00959
G1 X177.867 Y205.048 E.00692
G1 X177.797 Y204.751 E.01033
G1 X177.833 Y204.419 E.0113
G1 X177.965 Y204.183 E.00915
G1 X178.181 Y204.02 E.00916
G1 X178.445 Y203.968 E.00911
G1 X178.754 Y204.041 E.01075
G1 X179.104 Y204.263 E.01403
G1 X179.629 Y204.797 E.02535
G1 X180.265 Y205.564 E.03373
G1 X180.693 Y206.028 E.02137
G1 X181.206 Y206.429 E.02204
G1 X181.637 Y206.63 E.0161
G1 X182.03 Y206.688 E.01345
;PATH_TASK id=913 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X182.2 Y206.66 E-.02757
G1 X182.271 Y206.544 E-.02176
G1 X182.284 Y205.853 E-.11067
;WIPE_END
G1 X182.671 Y205.859 F24000
G1 X184.389 Y207.889
G1 X184.775 Y208.275
G1 E.8 F1800
G1 F10140
G1 F10200
G1 X175.225 Y208.275 E.32326
G1 X175.225 Y151.725 E1.91415
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y208.235 E1.91279
;PATH_TASK id=914 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X183.775 Y208.239 E-.16
;WIPE_END
G1 X183.775 Y207.889 F24000
G1 X182.712 Y203.475
G1 X183.161 Y203.483
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
G1 F11054.364
G1 X183.107 Y206.562 E.10423
G1 X183.027 Y206.895 E.0116
G1 X182.716 Y207.315 E.01769
G1 X182.635 Y207.394 E.00383
G1 X182.812 Y207.439 E.00619
G1 X183.939 Y207.439 E.03815
G1 X183.939 Y204.178 E.1104
G1 X183.823 Y204.144 E.00409
G1 X183.19 Y203.511 E.03032
;PATH_TASK id=915 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X183.486 Y206.986 F24000
;WIDTH:0.523972
G1 F9354.508
G1 X183.505 Y206.761 E.009
;PATH_TASK id=916 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.485067
G1 F10177.621
G1 X183.524 Y206.537 E.00827
;PATH_TASK id=917 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.465614
G1 F10645.999
G1 X183.542 Y204.465 E.07283
;PATH_TASK id=918 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X182.65 Y207.103 F24000
G1 X181.894 Y207.073
G1 X181.723 Y207.051
G1 X181.553 Y207.01
G1 X181.399 Y206.957
G1 X181.188 Y206.862
G1 X181.028 Y206.774
G1 X180.875 Y206.676
G1 X180.725 Y206.567
G1 X180.565 Y206.435
G1 X180.433 Y206.313
G1 X180.302 Y206.182
G1 X179.236 Y205.099
G1 X179.131 Y205.977
G1 X179.567 Y206.029
;WIDTH:0.449999
G1 F11054.364
G1 X179.475 Y206.666 E.02178
G1 X179.429 Y206.768 E.00381
G1 X179.088 Y207.17 E.01784
;PATH_TASK id=919 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.471669
G1 F10495.651
G1 X178.917 Y207.283 E.00729
;PATH_TASK id=920 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.499932
G1 F9846.583
G1 X178.746 Y207.396 E.00777
G1 X179.212 Y207.439 E.01778
;PATH_TASK id=921 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.449999
G1 F11054.364
G1 X180.843 Y207.439 E.0552
G1 X181.224 Y207.402 E.01295
G1 X180.693 Y207.089 E.02085
G1 X180.128 Y206.643 E.02437
G1 X179.592 Y206.06 E.02681
;PATH_TASK id=922 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X179.861 Y206.932 F24000
;WIDTH:0.542736
G1 F9003.314
G1 X179.799 Y206.932 E.0026
G1 X179.767 Y206.986 E.0026
G1 X179.799 Y207.04 E.0026
G1 X179.861 Y207.04 E.0026
G1 X179.872 Y207.021 E.00093
;PATH_TASK id=923 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X178.005 Y207.361 F24000
;WIDTH:0.588081
G1 F8254.442
G1 X178.26 Y207.38 E.0116
;PATH_TASK id=924 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.555975
G1 F8770.987
G2 X178.66 Y207.392 I.253 J-1.701 E.01709
;PATH_TASK id=925 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X176.53 Y206.948 F24000
;WIDTH:0.51604
G1 F9511.329
G2 X176.53 Y207.051 I-.03 J.051 E.00975
G1 X176.54 Y207.034 E.00075
;PATH_TASK id=926 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X176.119 Y205.701 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X176.061 Y205.961 E.00902
G1 X176.061 Y207.439 E.05005
G1 X177.178 Y207.439 E.03783
;PATH_TASK id=927 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.472146
G1 F10484.008
G1 X177.434 Y207.417 E.00916
;PATH_TASK id=928 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.516438
G1 F9503.344
G1 X177.689 Y207.395 E.0101
;PATH_TASK id=929 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.56073
G1 F8690.448
G1 X177.945 Y207.373 E.01105
;PATH_TASK id=930 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.594801
G1 F8153.932
G1 X178.005 Y207.361 E.00282
;PATH_TASK id=931 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.587135
G1 F8268.789
G1 X177.819 Y207.271 E.00938
;PATH_TASK id=932 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.547954
G1 F8910.302
G1 X177.632 Y207.181 E.0087
;PATH_TASK id=933 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.508772
G1 F9659.728
G1 X177.445 Y207.091 E.00803
;PATH_TASK id=934 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.454227
G1 F10940.742
G1 X177.259 Y207 E.00709
G1 X176.813 Y206.687 E.01862
G1 X176.389 Y206.159 E.02317
G1 X176.139 Y205.735 E.01681
;PATH_TASK id=935 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X176.061 Y199.836 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X176.063 Y203.858 E.13614
G1 X176.081 Y203.896 E.00142
G1 X176.395 Y203.196 E.02598
G1 X176.579 Y202.937 E.01075
G1 X176.924 Y202.593 E.0165
G1 X177.496 Y202.245 E.02264
G1 X177.869 Y202.127 E.01326
G1 X178.302 Y202.078 E.01475
G1 X176.089 Y199.864 E.10595
;PATH_TASK id=936 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X176.468 Y200.819 F24000
G1 F11054.364
G1 X176.468 Y202.468 E.05583
G1 X176.713 Y202.245 E.01123
G1 X177.284 Y201.897 E.02264
G1 X177.47 Y201.821 E.00678
G1 X176.496 Y200.847 E.04661
;PATH_TASK id=937 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X176.865 Y201.689 F24000
;WIDTH:0.387196
G1 F12000
G1 X176.8 Y201.726 E.00213
G1 X176.866 Y201.761 E.00214
;PATH_TASK id=938 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X181.773 Y197.201 F24000
;WIDTH:0.45
G1 F11054.338
G1 X184 Y199.428 E.10663
G1 X184 Y200.004 E.01949
G1 X181.647 Y197.65 E.11268
G1 X181.523 Y197.746 E.00531
G1 X181.263 Y197.842 E.00938
G1 X184 Y200.58 E.13105
G1 X184 Y201.156 E.01949
G1 X180.701 Y197.856 E.15793
G1 X180.311 Y197.847 E.01322
G1 X180.11 Y197.797 E.007
G1 X180.018 Y197.748 E.00353
G1 X184 Y201.731 E.19066
G1 X184 Y202.307 E.01949
G1 X177.982 Y196.289 E.28809
G1 X176.75 Y195.389 E.05164
G1 X176.629 Y195.511 E.00581
G1 X176 Y194.882 E.03011
G1 X184 Y202.883 E.383
G1 X184 Y203.458 E.01949
G1 X176 Y195.457 E.383
G1 X176 Y196.033 E.01949
G1 X182.13 Y202.164 E.29348
G1 X181.547 Y202.156 E.01975
G1 X176 Y196.609 E.26555
G1 X176 Y197.185 E.01949
G1 X181.065 Y202.25 E.24248
G2 X180.741 Y202.502 I.41 J.861 E.014
G1 X176 Y197.76 E.22698
G1 X176 Y198.336 E.01949
G1 X180.567 Y202.903 E.21863
G1 X180.518 Y203.055 E.00538
G1 X180.518 Y203.096 E.00139
G1 X179.948 Y202.603 E.02549
G1 X179.379 Y202.291 E.02199
G1 X175.816 Y198.728 E.17053
;PATH_TASK id=939 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X179.838 Y197.649 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.293215
G1 F7200
G1 X179.594 Y197.44 E.00669
;PATH_TASK id=940 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.24845
G1 X179.349 Y197.231 E.0055
;PATH_TASK id=941 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.203684
G1 X179.105 Y197.021 E.0043
;PATH_TASK id=942 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.158919
G1 X178.861 Y196.812 E.0031
;PATH_TASK id=943 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.136536
G1 X178.616 Y196.603 E.0025
;PATH_TASK id=944 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X181.087 Y197.721 F24000
;WIDTH:0.102341
G1 F7200
G1 X180.954 Y197.822 E.00082
;PATH_TASK id=945 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X183.469 Y203.791 F24000
;WIDTH:0.385992
G1 F7200
G1 X182.892 Y202.638 E.03677
;PATH_TASK id=946 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X184.143 Y203.676 F24000
;WIDTH:0.339961
G1 F7200
G1 X184.087 Y203.737 E.00205
;PATH_TASK id=947 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.383729
G1 X184.03 Y203.798 E.00236
;PATH_TASK id=948 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.427497
G1 X183.974 Y203.86 E.00266
;PATH_TASK id=949 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.45381
G1 X183.918 Y203.921 E.00284
G1 X183.809 Y203.842 E.00459
G1 X182.905 Y202.939 E.04365
;PATH_TASK id=950 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X178.808 Y202.296 F24000
;WIDTH:0.449955
G1 F7200
G1 X175.857 Y199.345 E.14126
;PATH_TASK id=951 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X179.112 Y202.312 F24000
;WIDTH:0.350908
G1 F7200
G1 X178.004 Y201.78 E.03146
;PATH_TASK id=952 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X176.156 Y193.735 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.626477
G1 F7711.329
G1 X176.141 Y194.135 E.01944
;PATH_TASK id=953 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.596163
G1 F8133.858
G1 X176.126 Y194.536 E.01843
;PATH_TASK id=954 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.566528
G1 F8594.224
G1 X176.148 Y194.624 E.00395
;PATH_TASK id=955 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.537571
G1 F9097.332
G1 X176.169 Y194.712 E.00373
;PATH_TASK id=956 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.49973
G1 F9850.922
G1 X176.314 Y194.899 E.00898
;PATH_TASK id=957 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.453006
G1 F10973.307
G1 X176.458 Y195.087 E.00806
;PATH_TASK id=958 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.429644
G1 F11636.205
G1 X176.602 Y195.274 E.0076
;PATH_TASK id=959 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X176.828 Y194.965 F24000
G1 X176.637 Y194.825
G1 X176.661 Y193.396
G1 X179.912 Y192.776
G1 X181.696 Y192.807
G1 X181.966 Y193.487
G1 X182.881 Y193.502
G1 X182.936 Y193.376
;WIDTH:0.38292
G1 F12000
G1 X183.088 Y193.534 E.0062
;PATH_TASK id=960 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X183.373 Y193.993 F24000
;WIDTH:0.565242
G1 F8615.375
G1 X183.356 Y194.908 E.03975
;PATH_TASK id=961 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.547894
G1 F8911.35
G1 X183.256 Y195.08 E.00834
;PATH_TASK id=962 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.508736
G1 F9660.467
G1 X183.156 Y195.251 E.00769
;PATH_TASK id=963 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.450435
G1 F11042.536
G1 X183.056 Y195.423 E.00673
G1 X182.629 Y195.717 E.01756
G1 X182.095 Y195.774 E.01819
G1 X182.071 Y196.965 E.04034
G1 X182.028 Y197.168 E.00704
G1 X183.939 Y199.079 E.0916
G1 X183.939 Y195.517 E.12073
;PATH_TASK id=964 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.470222
G1 F10531.193
G1 X183.919 Y195.342 E.00626
;PATH_TASK id=965 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.510668
G1 F9620.566
G1 X183.899 Y195.167 E.00685
;PATH_TASK id=966 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.562298
G1 F8664.21
G1 X183.879 Y194.992 E.0076
G1 X183.883 Y194.431 E.02422
G1 X183.807 Y194.421 E.00332
G1 X183.402 Y194.021 E.02459
;PATH_TASK id=967 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X183.532 Y195.418 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X183.301 Y195.749 E.01366
G1 X182.818 Y196.084 E.01989
G1 X182.496 Y196.155 E.01116
G1 X182.483 Y196.933 E.02633
G1 X182.471 Y197.035 E.00351
G1 X183.532 Y198.097 E.0508
G1 X183.532 Y195.458 E.08931
;PATH_TASK id=968 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X183.17 Y196.299 F24000
;WIDTH:0.36239
G1 F12000
G1 X182.854 Y196.449 E.0093
G1 X182.847 Y196.897 E.01191
G1 X183.169 Y197.219 E.01208
G1 X183.17 Y196.339 E.02337
;PATH_TASK id=969 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X181.84 Y187.482 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X184 Y189.642 E.1034
G1 X184 Y190.217 E.01949
G1 X181.566 Y187.783 E.11654
G1 X181.092 Y187.885 E.0164
G1 X184 Y190.793 E.13921
G1 X184 Y191.369 E.01949
G1 X180.579 Y187.947 E.16378
G3 X180.009 Y187.953 I-.312 J-2.675 E.01933
G1 X184 Y191.944 E.19106
G1 X184 Y192.52 E.01949
G1 X179.402 Y187.921 E.22015
G1 X178.72 Y187.816 E.02333
G1 X184 Y193.096 E.25276
G1 X184 Y193.671 E.01949
G1 X176 Y185.671 E.383
G1 X176 Y186.246 E.01949
G1 X182.936 Y193.183 E.33204
G1 X182.847 Y193.272 E.00427
G1 X182.516 Y193.127 E.01223
G2 X182.285 Y193.107 I-.181 J.776 E.00787
G1 X176 Y186.822 E.30088
G1 X176 Y187.398 E.01949
G1 X181.01 Y192.408 E.23984
G1 X180.425 Y192.399 E.01979
G1 X176 Y187.973 E.21186
G1 X176 Y188.549 E.01949
G1 X179.986 Y192.535 E.19081
G1 X179.911 Y192.576 E.00286
G1 X179.707 Y192.771 E.00958
G1 X179.691 Y192.816 E.00162
G1 X176 Y189.125 E.1767
G1 X176 Y189.7 E.01949
G1 X179.352 Y193.053 E.16049
G1 X178.767 Y193.043 E.01983
G1 X176 Y190.276 E.13246
G1 X176 Y190.852 E.01949
G1 X178.181 Y193.033 E.10442
G1 X177.595 Y193.023 E.01983
G1 X176 Y191.428 E.07639
G1 X176 Y192.003 E.01949
G1 X177.045 Y193.049 E.05005
G1 X176.862 Y193.082 E.00629
G1 X176.656 Y193.236 E.0087
G1 X175.816 Y192.396 E.0402
;PATH_TASK id=970 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X175.611 Y192.396 F24000
G1 X175.611 Y207.889
G1 X184.389 Y207.889
G1 X184.389 Y193.889
G1 X184.143 Y193.889
M204 P2500
;TYPE:Gap infill
;WIDTH:0.339961
G1 F7200
G1 X184.087 Y193.95 E.00205
;PATH_TASK id=971 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.383732
G1 X184.03 Y194.011 E.00236
;PATH_TASK id=972 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.427502
G1 X183.974 Y194.073 E.00266
;PATH_TASK id=973 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.454577
G1 X183.918 Y194.134 E.00285
G1 X183.809 Y194.055 E.0046
G1 X183.08 Y193.326 E.03529
;PATH_TASK id=974 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X181.483 Y192.613 F24000
;WIDTH:0.188661
G1 F7200
G1 X181.276 Y192.491 E.00292
G1 X181.172 Y192.546 E.00143
;PATH_TASK id=975 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X176.509 Y193.665 F24000
;WIDTH:0.449969
G1 F7200
G1 X175.857 Y193.012 E.03123
;PATH_TASK id=976 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X178.581 Y187.64 F24000
;WIDTH:0.098621
G1 F7200
G1 X178.353 Y187.736 E.00115
;PATH_TASK id=977 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X178.047 Y187.515 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.38292
G1 F12000
G1 X177.983 Y187.552 E.00208
G1 X178.048 Y187.587 E.00208
;PATH_TASK id=978 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X178.198 Y187.251 F24000
G1 X178.056 Y187.187
G1 X177.93 Y187.122
G1 X177.83 Y187.064
G1 X177.702 Y186.979
G1 X177.584 Y186.89
G1 X177.473 Y186.795
G1 X177.366 Y186.689
G1 X177.264 Y186.574
G1 X177.147 Y186.418
G1 X177.047 Y186.254
G1 X176.996 Y186.155
G1 X176.936 Y186.018
G1 X176.872 Y185.833
G1 X176.825 Y185.638
G1 X176.795 Y185.439
G1 X176.781 Y185.235
G1 X176.785 Y184.997
G1 X176.961 Y182.302
;WIDTH:0.557552
G1 F8744.113
G1 X176.896 Y182.302 E.00275
G1 X176.864 Y182.358 E.00275
G1 X176.896 Y182.414 E.00275
G1 X176.961 Y182.414 E.00275
G1 X176.973 Y182.392 E.00104
;PATH_TASK id=979 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X177.703 Y182.481 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X176.468 Y181.245 E.05913
G1 X176.468 Y183.422 E.07367
G1 X176.852 Y182.992 E.01951
G1 X177.164 Y182.755 E.01328
G1 X177.667 Y182.499 E.01911
;PATH_TASK id=980 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X178.488 Y182.69 F24000
;WIDTH:0.448622
G1 F11091.892
G1 X176.061 Y180.262 E.11581
G1 X176.061 Y183.843 E.12077
G1 X176.045 Y184.52 E.02285
;PATH_TASK id=981 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.393565
G1 F12000
G2 X176.032 Y185.535 I12.127 J.668 E.02962
G1 X176.123 Y185.547 E.00269
G1 X176.443 Y185.838 E.0126
G1 X176.366 Y185.244 E.01747
G1 X176.406 Y184.63 E.01793
;PATH_TASK id=982 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.440205
G1 F11326.899
G1 X176.624 Y183.94 E.02389
G1 X176.804 Y183.649 E.01131
G1 X177.11 Y183.307 E.01515
G1 X177.349 Y183.117 E.01007
G1 X177.94 Y182.816 E.02193
G1 X178.449 Y182.699 E.01725
;PATH_TASK id=983 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X181.741 Y182.858 F24000
;WIDTH:0.38292
G1 F12000
G1 X181.678 Y182.895 E.00208
G1 X181.743 Y182.93 E.00208
;PATH_TASK id=984 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X183.544 Y185.471 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X183.435 Y186.057 E.02016
G1 X183.107 Y186.747 E.02586
G1 X182.776 Y187.134 E.01725
G1 X182.501 Y187.389 E.01269
G1 X182.204 Y187.557 E.01155
G1 X183.939 Y189.293 E.08308
G1 X183.939 Y185.76 E.11958
G1 X183.857 Y185.756 E.00281
G1 X183.574 Y185.498 E.01295
;PATH_TASK id=985 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X183.494 Y186.965 F24000
;WIDTH:0.527461
G1 F9287.14
G1 X183.22 Y187.326 E.01825
G1 X182.905 Y187.628 E.01758
G1 X183.494 Y188.216 E.03355
G1 X183.494 Y187.005 E.04881
;PATH_TASK id=986 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X182.403 Y177.97 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X183.939 Y179.506 E.07352
G1 X183.939 Y176.944 E.08672
;PATH_TASK id=987 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.434993
G1 F11477.468
G1 X183.954 Y176.593 E.01146
;PATH_TASK id=988 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.40498
G1 F12000
G1 X183.969 Y176.242 E.01058
;PATH_TASK id=989 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.369156
G2 X183.983 Y175.375 I-22.899 J-.796 E.02351
G1 X183.887 Y175.362 E.00262
G1 X183.612 Y175.087 E.01057
G1 X183.664 Y175.507 E.01148
G1 X183.638 Y176.163 E.01781
;PATH_TASK id=990 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.398582
G1 X183.541 Y176.514 E.01076
;PATH_TASK id=991 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.443314
G1 F11238.949
G1 X183.444 Y176.864 E.01211
G1 X183.098 Y177.404 E.02134
G1 X182.631 Y177.838 E.02122
G1 X182.438 Y177.95 E.00744
;PATH_TASK id=992 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X183.033 Y178.023 F24000
;WIDTH:0.45071
G1 F11035.091
G1 X183.532 Y178.522 E.02393
G1 X183.532 Y177.486 E.03515
G1 X183.34 Y177.743 E.0109
G1 X183.062 Y177.996 E.01272
;PATH_TASK id=993 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X182.037 Y177.891 F24000
;WIDTH:0.45
G1 F11054.338
G1 X184 Y179.855 E.09398
G1 X184 Y180.43 E.01949
G1 X181.746 Y178.176 E.10793
G3 X181.236 Y178.242 I-.469 J-1.625 E.01747
G1 X184 Y181.006 E.13234
M73 P81 R7
G1 X184 Y181.582 E.01949
G1 X180.616 Y178.197 E.16204
G3 X180.338 Y178.135 I.226 J-1.653 E.00964
G1 X179.928 Y177.952 E.0152
G2 X179.698 Y177.855 I-.233 J.23 E.00867
G1 X184 Y182.158 E.20597
G1 X184 Y182.733 E.01949
G1 X179.238 Y177.971 E.22796
G1 X178.701 Y178.01 E.01823
G1 X184 Y183.309 E.25367
G1 X184 Y183.885 E.01949
G1 X176 Y175.884 E.383
G1 X176 Y176.459 E.01949
G1 X184 Y184.46 E.383
G1 X184 Y185.036 E.01949
G1 X183.349 Y184.384 E.03119
G1 X183.253 Y184.154 E.00844
G1 X182.995 Y183.726 E.01692
G1 X182.809 Y183.508 E.0097
G1 X182.43 Y183.186 E.01683
G1 X182.211 Y183.05 E.00874
G1 X181.862 Y182.898 E.01287
G1 X176 Y177.035 E.28064
G1 X176 Y177.611 E.01949
G1 X181.101 Y182.712 E.2442
G2 X180.516 Y182.703 I-.316 J1.566 E.0199
G1 X176 Y178.187 E.21622
G1 X176 Y178.762 E.01949
G1 X180.013 Y182.776 E.19213
G1 X179.606 Y182.945 E.01491
G1 X175.816 Y179.155 E.18142
;PATH_TASK id=994 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X175.611 Y179.155 F24000
G1 X175.611 Y207.889
G1 X184.389 Y207.889
G1 X184.389 Y185.692
G1 X183.793 Y185.692
M204 P2500
;TYPE:Gap infill
;WIDTH:0.343304
G1 F7200
G1 X183.316 Y184.639 E.02886
;PATH_TASK id=995 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X184.143 Y185.253 F24000
;WIDTH:0.339964
G1 F7200
G1 X184.087 Y185.315 E.00205
;PATH_TASK id=996 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.383731
G1 X184.03 Y185.376 E.00236
;PATH_TASK id=997 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.427498
G1 X183.974 Y185.437 E.00266
;PATH_TASK id=998 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.456395
G1 X183.918 Y185.499 E.00286
G1 X183.809 Y185.42 E.00462
G1 X183.331 Y184.942 E.02325
;PATH_TASK id=999 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X181.573 Y182.915 F24000
;WIDTH:0.153869
G1 F7200
G1 X181.3 Y182.768 E.00286
;PATH_TASK id=1000 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X179.28 Y182.906 F24000
;WIDTH:0.445114
G1 F7200
G2 X178.751 Y182.665 I-3.361 J6.671 E.01945
G1 X175.857 Y179.771 E.13688
;PATH_TASK id=1001 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X181.032 Y178.203 F24000
;WIDTH:0.0942135
G1 F7200
G3 X180.84 Y178.109 I1.634 J-3.582 E.00092
;PATH_TASK id=1002 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X180.871 Y177.85 F24000
G1 X180.97 Y177.862
G1 X181.221 Y177.865
G1 X181.367 Y177.855
G1 X181.511 Y177.836
G1 X181.724 Y177.789
G1 X181.862 Y177.745
G1 X181.998 Y177.692
G1 X182.196 Y177.592
G1 X182.314 Y177.518
G1 X182.428 Y177.435
G1 X182.567 Y177.318
G1 X182.688 Y177.198
G1 X182.803 Y177.064
G1 X182.905 Y176.921
G1 X182.995 Y176.77
G1 X183.072 Y176.613
G1 X183.13 Y176.464
G1 X183.181 Y176.305
G1 X183.228 Y176.097
G1 X183.253 Y175.921
G1 X183.269 Y175.717
G1 X183.271 Y175.545
G1 X183.261 Y175.353
G1 X183.244 Y175.196
G1 X183.211 Y175.016
G1 X183.205 Y174.994
G1 X184.389 Y173.705
G1 X184.184 Y173.705
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.450003
G1 F11054.256
G1 X181.203 Y170.725 E.14266
G1 X180.618 Y170.715 E.01983
G1 X184 Y174.098 E.16193
G1 X184 Y174.674 E.01949
G1 X180.247 Y170.92 E.17968
;PATH_TASK id=1003 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X180.345 Y170.568 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.133044
G1 F7200
G1 X180.333 Y170.771 E.00152
;PATH_TASK id=1004 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.131772
G1 X180.387 Y170.78 E.0004
;PATH_TASK id=1005 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X184.143 Y174.891 F24000
;WIDTH:0.339964
G1 F7200
G1 X184.087 Y174.952 E.00205
;PATH_TASK id=1006 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.38373
G1 X184.03 Y175.013 E.00236
;PATH_TASK id=1007 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.427497
G1 X183.974 Y175.075 E.00266
;PATH_TASK id=1008 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.456273
G1 X183.918 Y175.136 E.00286
G1 X183.809 Y175.058 E.00462
G1 X183.318 Y174.567 E.02383
;PATH_TASK id=1009 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X183.939 Y173.173 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.449999
G1 F11054.364
G1 X183.939 Y170.452 E.0921
;PATH_TASK id=1010 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.426252
G1 F11739.194
G1 X183.963 Y170.198 E.00814
;PATH_TASK id=1011 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.371368
G1 F12000
G2 X183.988 Y169.834 I-2.101 J-.324 E.00998
;PATH_TASK id=1012 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.378345
G1 X183.963 Y169.767 E.00198
;PATH_TASK id=1013 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.428181
G1 F11680.4
G1 X183.938 Y169.7 E.00228
;PATH_TASK id=1014 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.478017
G1 F10342.53
G1 X183.913 Y169.634 E.00257
;PATH_TASK id=1015 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.527853
G1 F9279.644
G1 X183.888 Y169.567 E.00287
;PATH_TASK id=1016 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.577689
G1 F8414.861
G1 X183.863 Y169.5 E.00316
;PATH_TASK id=1017 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.627524
G1 F7697.517
G1 X183.838 Y169.434 E.00346
;PATH_TASK id=1018 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X183.811 Y169.5 E.00346
;PATH_TASK id=1019 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.577689
G1 F8414.861
G1 X183.785 Y169.566 E.00316
;PATH_TASK id=1020 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.527853
G1 F9279.644
G1 X183.758 Y169.632 E.00287
;PATH_TASK id=1021 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.478017
G1 F10342.53
G1 X183.731 Y169.697 E.00257
;PATH_TASK id=1022 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.428181
G1 F11680.4
G1 X183.704 Y169.763 E.00228
;PATH_TASK id=1023 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.368426
G1 F12000
G1 X183.677 Y169.829 E.00193
G1 X183.671 Y170.002 E.00466
;PATH_TASK id=1024 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.393923
G1 X183.611 Y170.186 E.00567
;PATH_TASK id=1025 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.448714
G1 F11089.367
G1 X183.55 Y170.371 E.00655
G1 X183.152 Y170.708 E.01761
G1 X182.715 Y170.812 E.01517
G1 X181.558 Y170.792 E.03901
G1 X183.911 Y173.145 E.11226
;PATH_TASK id=1026 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X183.48 Y172.063 F24000
;WIDTH:0.555236
G1 F8783.642
G1 X183.48 Y171.036 E.04377
G1 X183.158 Y171.197 E.01534
G1 X182.701 Y171.285 E.0198
G1 X183.451 Y172.035 E.0452
;PATH_TASK id=1027 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X183.838 Y169.434 F24000
;WIDTH:0.652442
G1 F7382.835
G1 X183.838 Y169.057 E.0191
;PATH_TASK id=1028 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X183.838 Y169.017 F24000
;WIDTH:0.632544
G1 F7631.991
G1 X183.858 Y168.934 E.00418
;PATH_TASK id=1029 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.591978
G1 F8195.857
G1 X183.879 Y168.851 E.00389
;PATH_TASK id=1030 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.551413
G1 F8849.688
G1 X183.899 Y168.769 E.0036
;PATH_TASK id=1031 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.510847
G1 F9616.883
G1 X183.919 Y168.686 E.00332
;PATH_TASK id=1032 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.457029
G1 F10866.701
G1 X183.939 Y168.603 E.00293
G2 X183.923 Y166.85 I-36.39 J-.536 E.06037
;PATH_TASK id=1033 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.506996
G1 F9696.687
G1 X183.899 Y166.703 E.00577
;PATH_TASK id=1034 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.555312
G1 F8782.339
G1 X183.875 Y166.555 E.00637
;PATH_TASK id=1035 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.557892
G1 F8738.348
G1 X183.721 Y166.838 E.01376
;PATH_TASK id=1036 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.514735
G1 F9537.647
G1 X183.567 Y167.12 E.01261
;PATH_TASK id=1037 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.452817
G1 F10978.388
G1 X183.414 Y167.402 E.01096
G1 X183.039 Y167.787 E.0183
G1 X182.779 Y167.992 E.01127
G1 X182.628 Y168.076 E.0059
G1 X183.144 Y168.17 E.01789
G1 X183.578 Y168.547 E.0196
;PATH_TASK id=1038 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.470282
G1 F10529.722
G1 X183.626 Y168.634 E.00353
;PATH_TASK id=1039 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.510847
G1 F9616.883
G1 X183.675 Y168.721 E.00387
;PATH_TASK id=1040 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.551413
G1 F8849.688
G1 X183.723 Y168.808 E.0042
;PATH_TASK id=1041 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.591978
G1 F8195.857
G1 X183.771 Y168.895 E.00454
;PATH_TASK id=1042 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.612261
G1 F7903.88
G1 X183.819 Y168.982 E.0047
;PATH_TASK id=1043 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X183.545 Y167.859 F24000
;WIDTH:0.479318
G1 F10311.688
G2 X183.552 Y167.941 I-.027 J.044 E.00829
;PATH_TASK id=1044 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X183.875 Y166.555 F24000
;WIDTH:0.560877
G1 F8687.988
G1 X183.893 Y166.244 E.01342
;PATH_TASK id=1045 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.527292
G1 F9290.396
G2 X183.903 Y165.723 I-2.506 J-.306 E.02104
;PATH_TASK id=1046 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X184.184 Y163.918 F24000
;WIDTH:0.450003
G1 F11054.256
G1 X181.28 Y161.015 E.13899
G1 X180.694 Y161.005 E.01983
G1 X184 Y164.311 E.15826
G1 X184 Y164.887 E.01949
G1 X180.408 Y161.294 E.17197
;PATH_TASK id=1047 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X184.074 Y165.676 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.340072
G1 F7200
G1 X183.69 Y165.071 E.01772
;PATH_TASK id=1048 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.316101
G1 X183.63 Y164.984 E.00238
;PATH_TASK id=1049 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.278013
G1 X183.571 Y164.898 E.00205
;PATH_TASK id=1050 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.239926
G1 X183.511 Y164.811 E.00172
;PATH_TASK id=1051 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.199909
G1 X183.446 Y164.716 E.00151
;PATH_TASK id=1052 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.166428
G1 X183.366 Y164.618 E.0013
;PATH_TASK id=1053 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.139628
G1 X183.201 Y164.429 E.00202
;PATH_TASK id=1054 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X184.143 Y165.104 F24000
;WIDTH:0.339964
G1 F7200
G1 X184.087 Y165.165 E.00205
;PATH_TASK id=1055 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.38373
G1 X184.03 Y165.227 E.00236
;PATH_TASK id=1056 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.427497
G1 X183.974 Y165.288 E.00266
;PATH_TASK id=1057 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.458148
G1 X183.918 Y165.349 E.00287
G1 X183.809 Y165.271 E.00464
G1 X183.466 Y164.928 E.01674
;PATH_TASK id=1058 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X183.939 Y163.386 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.449999
G1 F11054.364
G1 X183.939 Y160.719 E.09029
;PATH_TASK id=1059 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.463808
G1 F10691.699
G1 X183.926 Y160.492 E.00794
;PATH_TASK id=1060 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.481633
G1 F10257.285
G1 X183.912 Y160.266 E.00827
G1 X183.645 Y160.75 E.02017
;PATH_TASK id=1061 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.449999
G1 F11054.364
G1 X183.217 Y161.043 E.01757
G1 X182.865 Y161.103 E.01208
G1 X181.635 Y161.082 E.04163
G1 X183.911 Y163.358 E.10895
;PATH_TASK id=1062 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X183.495 Y162.314 F24000
;WIDTH:0.52437
G1 F9346.765
G1 X183.495 Y161.394 E.03683
G1 X183.212 Y161.496 E.01206
G1 X182.726 Y161.545 E.01952
G1 X183.467 Y162.285 E.04192
;PATH_TASK id=1063 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X183.912 Y160.266 F24000
;WIDTH:0.504299
G1 F9753.372
G1 X183.923 Y159.355 E.03495
;PATH_TASK id=1064 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X183.92 Y159.315 F24000
;WIDTH:0.470023
G1 F10536.108
G1 X183.939 Y159.144 E.00613
;PATH_TASK id=1065 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.431964
G1 F11566.814
G1 X183.958 Y158.972 E.00559
;PATH_TASK id=1066 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.410608
G1 F12000
G1 X183.977 Y158.8 E.00528
G1 X183.936 Y158.212 E.01804
;PATH_TASK id=1067 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.462621
G1 F10721.931
G1 X183.93 Y158.157 E.00192
;PATH_TASK id=1068 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.445562
G1 F11176.18
G1 X183.806 Y158.376 E.00841
;PATH_TASK id=1069 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.384887
G1 F12000
G1 X183.682 Y158.594 E.00714
G1 X183.578 Y158.694 E.0041
G1 X183.703 Y158.845 E.00557
;PATH_TASK id=1070 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.393906
G1 X183.77 Y158.99 E.00465
;PATH_TASK id=1071 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.431964
G1 F11566.814
G1 X183.836 Y159.134 E.00516
;PATH_TASK id=1072 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.450994
G1 F11027.429
G1 X183.903 Y159.279 E.00541
;PATH_TASK id=1073 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X183.93 Y158.157 F24000
;WIDTH:0.469124
G1 F10558.324
G1 X183.94 Y157.575 E.02062
;PATH_TASK id=1074 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X183.493 Y157.568 F24000
G1 X183.492 Y157.64
G1 X183.459 Y158.552
G1 X182.721 Y158.525
G1 X182.55 Y158.509
G1 X182.378 Y158.477
G1 X182.225 Y158.423
G1 X179.947 Y157.527
G1 X179.859 Y158.257
G1 X180.21 Y158.299
;WIDTH:0.496749
G1 F9915.629
G1 X181.181 Y158.315 E.03665
G3 X180.417 Y157.563 I3.365 J-4.179 E.04054
G1 X180.331 Y158.098 E.02046
G1 X180.231 Y158.265 E.00735
;PATH_TASK id=1075 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X179.864 Y158.221 F24000
G1 X179.836 Y158.451
G1 X177.23 Y158.722
G1 X177.222 Y159.21
G1 X175.611 Y159.635
G1 X175.87 Y159.635
;WIDTH:0.450008
G1 F11054.12
G1 X179.691 Y163.455 E.1829
;PATH_TASK id=1076 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X179.148 Y163.488 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.449961
G1 F7200
G1 X175.857 Y160.197 E.1575
;PATH_TASK id=1077 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X176.862 Y163.49 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.424288
G1 F11799.626
G1 X177.165 Y163.239 E.01248
G1 X177.359 Y163.121 E.00722
G1 X176.862 Y162.623 E.0223
G1 X176.862 Y163.45 E.02623
;PATH_TASK id=1078 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X176.468 Y164.785 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X176.591 Y164.496 E.01065
G1 X176.992 Y163.926 E.02359
G1 X177.362 Y163.58 E.01716
G1 X177.996 Y163.2 E.02501
G1 X176.468 Y161.672 E.07317
G1 X176.468 Y164.745 E.10404
;PATH_TASK id=1079 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X176.464 Y168.203 F24000
;WIDTH:0.443215
G1 F11241.709
G1 X176.839 Y167.826 E.01769
G1 X176.956 Y167.76 E.00447
G1 X176.609 Y167.284 E.01961
G1 X176.464 Y166.954 E.01198
G1 X176.464 Y168.163 E.04025
;PATH_TASK id=1080 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X176.696 Y169.937 F24000
;WIDTH:0.473442
G1 F10452.439
G1 X176.644 Y169.814 E.0048
;PATH_TASK id=1081 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.513745
G1 F9557.708
G1 X176.592 Y169.69 E.00525
G1 X176.571 Y168.995 E.02721
;PATH_TASK id=1082 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.502127
G1 F9799.502
G1 X176.641 Y168.78 E.00863
;PATH_TASK id=1083 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.45155
G1 F11012.412
G1 X176.711 Y168.565 E.00768
G1 X177.018 Y168.19 E.01647
G1 X177.308 Y168.046 E.01103
G1 X177.546 Y167.994 E.00825
G1 X177.843 Y167.997 E.0101
G1 X177.374 Y167.642 E.01999
G1 X176.935 Y167.046 E.02516
;PATH_TASK id=1084 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.474799
G1 F10419.584
G1 X176.809 Y166.781 E.01053
;PATH_TASK id=1085 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.540501
G1 F9043.753
G1 X176.683 Y166.516 E.01213
G1 X176.612 Y165.903 E.02554
;PATH_TASK id=1086 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.560209
G1 F8699.2
G1 X176.651 Y165.348 E.02391
;PATH_TASK id=1087 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.552763
G1 F8826.258
G1 X176.733 Y165.16 E.00872
;PATH_TASK id=1088 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.511657
G1 F9600.266
G1 X176.815 Y164.971 E.00802
;PATH_TASK id=1089 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.450408
G1 F11043.274
G1 X176.897 Y164.783 E.00697
G1 X177.325 Y164.16 E.0256
G1 X177.58 Y163.924 E.01179
G1 X178.206 Y163.549 E.02472
G1 X178.735 Y163.363 E.01899
G1 X176.061 Y160.689 E.12815
G1 X176.061 Y164.647 E.13413
;PATH_TASK id=1090 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.471862
G1 F10490.941
G1 X176.082 Y164.926 E.00998
;PATH_TASK id=1091 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.515587
G1 F9520.455
G1 X176.104 Y165.205 E.01099
;PATH_TASK id=1092 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.553359
G1 F8815.939
G2 X176.125 Y166.523 I43.125 J-.026 E.05595
;PATH_TASK id=1093 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.557754
G1 F8740.696
G1 X176.104 Y166.729 E.00887
;PATH_TASK id=1094 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.514652
G1 F9539.326
G1 X176.082 Y166.936 E.00813
;PATH_TASK id=1095 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.453521
G1 F10959.552
G1 X176.061 Y167.142 E.00708
G1 X176.061 Y168.481 E.04572
;PATH_TASK id=1096 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.468348
G1 F10577.589
G1 X176.078 Y168.737 E.00909
;PATH_TASK id=1097 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.513406
G1 F9564.584
G3 X176.095 Y169.381 I-4.953 J.455 E.02522
G1 X176.168 Y169.382 E.00284
G1 X176.668 Y169.908 E.02839
;PATH_TASK id=1098 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X176.748 Y170.004 F24000
;WIDTH:0.486336
G1 F10148.485
G3 X177.62 Y170.862 I-7.419 J8.42 E.04513
;PATH_TASK id=1099 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.456545
G1 F10879.432
G1 X177.818 Y171.121 E.01122
;PATH_TASK id=1100 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.407691
G1 F12000
G2 X178.227 Y171.621 I3.785 J-2.684 E.0196
;PATH_TASK id=1101 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X179.821 Y173.305 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X180.283 Y173.056 E.01775
G1 X180.588 Y172.972 E.0107
G1 X181.175 Y172.911 E.01999
G1 X181.826 Y172.993 E.02221
G1 X182.187 Y173.148 E.01332
G1 X180.452 Y171.413 E.08306
G1 X180.131 Y171.801 E.01705
G1 X179.795 Y171.953 E.01249
G1 X179.529 Y171.986 E.00908
G1 X178.709 Y171.966 E.02776
G1 X179.799 Y173.063 E.05236
G1 X179.818 Y173.265 E.00686
;PATH_TASK id=1102 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X180.033 Y172.729 F24000
;WIDTH:0.461487
G1 F10750.976
G1 X180.51 Y172.557 E.01764
G1 X180.953 Y172.51 E.0155
G1 X180.486 Y172.044 E.02295
G1 X180.29 Y172.187 E.00844
G1 X179.847 Y172.351 E.01646
G1 X179.677 Y172.373 E.00595
G1 X180.005 Y172.701 E.01612
;PATH_TASK id=1103 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X182.502 Y173.368 F24000
;WIDTH:0.38292
G1 F12000
G1 X182.998 Y173.83 E.01917
G1 X183.131 Y173.989 E.00586
;PATH_TASK id=1104 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X182.846 Y174.206 F24000
G1 X182.783 Y174.122
G1 X182.662 Y173.987
G1 X182.531 Y173.861
G1 X182.39 Y173.747
G1 X182.266 Y173.663
G1 X182.115 Y173.576
G1 X181.952 Y173.502
G1 X181.819 Y173.454
G1 X181.684 Y173.415
G1 X181.507 Y173.378
G1 X181.324 Y173.357
G1 X176.833 Y173.067
;WIDTH:0.366144
G1 F12000
G1 X177.251 Y172.758 E.01397
G1 X176.833 Y172.34 E.01588
G1 X176.833 Y173.027 E.01846
;PATH_TASK id=1105 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X176.468 Y174.105 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X176.598 Y173.877 E.00887
G1 X177.037 Y173.372 E.02267
G1 X177.43 Y173.074 E.01668
G1 X177.866 Y172.856 E.01649
G1 X176.468 Y171.458 E.06692
G1 X176.468 Y174.065 E.08823
;PATH_TASK id=1106 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X176.538 Y176.122 F24000
;WIDTH:0.479348
G1 F10310.985
G1 X176.492 Y175.577 E.01986
G1 X176.561 Y174.85 E.0265
;PATH_TASK id=1107 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.497744
G1 F9893.937
G1 X176.716 Y174.523 E.01368
;PATH_TASK id=1108 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.454808
G1 F10925.315
G1 X176.872 Y174.197 E.01239
G1 X177.345 Y173.639 E.02503
G1 X177.612 Y173.438 E.01147
G1 X178.108 Y173.191 E.01897
G1 X178.677 Y173.092 E.01981
G1 X176.061 Y170.476 E.12674
G1 X176.061 Y174.027 E.12164
G3 X176.069 Y175.442 I-13.862 J.788 E.04848
G1 X176.068 Y175.728 E.00977
G1 X176.149 Y175.734 E.00277
G1 X176.51 Y176.094 E.01745
;PATH_TASK id=1109 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X178.084 Y177.781 F24000
;WIDTH:0.38292
G1 F12000
G1 X178.02 Y177.817 E.00208
G1 X178.085 Y177.852 E.00208
;PATH_TASK id=1110 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X179.766 Y177.727 F24000
G1 F12000
G1 X179.702 Y177.764 E.00208
G1 X179.767 Y177.798 E.00208
;PATH_TASK id=1111 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X179.972 Y177.521 F24000
G1 X179.054 Y177.615
G1 X178.929 Y177.625
G1 X178.809 Y177.626
G1 X178.685 Y177.621
G1 X178.563 Y177.607
G1 X178.442 Y177.586
G1 X178.322 Y177.558
G1 X178.205 Y177.521
G1 X178.09 Y177.476
G1 X177.979 Y177.423
G1 X177.872 Y177.363
G1 X177.769 Y177.295
G1 X177.671 Y177.221
G1 X177.578 Y177.141
G1 X177.484 Y177.049
G1 X177.348 Y176.889
G1 X177.227 Y176.711
G1 X177.129 Y176.521
G1 X177.051 Y176.321
G1 X176.996 Y176.112
G1 X176.96 Y175.898
G1 X176.945 Y175.681
G1 X176.946 Y175.48
G1 X176.966 Y175.24
G1 X177.002 Y175.039
G1 X177.055 Y174.846
G1 X177.125 Y174.663
G1 X177.215 Y174.483
G1 X177.324 Y174.312
G1 X177.449 Y174.156
G1 X177.58 Y174.022
G1 X177.737 Y173.889
G1 X177.898 Y173.78
G1 X175.611 Y169.421
G1 X175.87 Y169.421
;WIDTH:0.450008
G1 F11054.12
G1 X179.785 Y173.336 E.18741
;PATH_TASK id=1112 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X179.188 Y173.315 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.449959
G1 F7200
G1 X175.857 Y169.984 E.15944
;PATH_TASK id=1113 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X179.503 Y173.351 F24000
;WIDTH:0.353736
G1 F7200
G1 X178.352 Y172.767 E.03336
;PATH_TASK id=1114 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X178.487 Y173.551 F24000
G1 X177.042 Y169.801
G1 X177.109 Y165.877
G1 X177.114 Y165.717
G1 X177.135 Y165.521
G1 X177.171 Y165.337
G1 X177.215 Y165.183
G1 X177.273 Y165.028
G1 X177.351 Y164.868
G1 X177.446 Y164.71
G1 X177.539 Y164.583
G1 X177.64 Y164.466
G1 X177.751 Y164.358
G1 X182.053 Y160.639
G1 X183.44 Y160.663
G1 X183.553 Y154.03
G1 X183.553 Y154.03
G1 X183.57 Y153.362
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.369016
G1 F12000
G1 X183.57 Y152.93 E.01171
G1 X183.029 Y152.92 E.01467
;PATH_TASK id=1115 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.379829
G1 X182.962 Y152.945 E.00199
;PATH_TASK id=1116 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.428715
G1 F11664.241
G1 X182.896 Y152.969 E.00228
;PATH_TASK id=1117 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.477601
G1 F10352.439
G1 X182.829 Y152.994 E.00257
;PATH_TASK id=1118 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.526486
G1 F9305.868
G1 X182.763 Y153.018 E.00285
;PATH_TASK id=1119 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.575372
G1 F8451.474
G1 X182.696 Y153.043 E.00314
;PATH_TASK id=1120 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.624258
G1 F7740.774
G1 X182.629 Y153.067 E.00343
;PATH_TASK id=1121 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X182.695 Y153.095 E.00343
;PATH_TASK id=1122 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.575372
G1 F8451.474
G1 X182.76 Y153.122 E.00314
;PATH_TASK id=1123 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.526486
G1 F9305.868
G1 X182.825 Y153.15 E.00285
;PATH_TASK id=1124 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.477601
G1 F10352.439
G1 X182.891 Y153.177 E.00257
;PATH_TASK id=1125 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.428715
G1 F11664.241
G1 X182.956 Y153.205 E.00228
;PATH_TASK id=1126 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.367253
G1 F12000
G1 X183.022 Y153.233 E.00191
G1 X183.359 Y153.255 E.00911
G1 X183.534 Y153.344 E.00531
;PATH_TASK id=1127 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X182.178 Y153.065 F24000
;WIDTH:0.644378
G1 F7481.819
G1 X182.589 Y153.067 E.02058
;PATH_TASK id=1128 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X181.123 Y153.664 F24000
;WIDTH:0.590118
G1 F8223.713
G1 X181.362 Y153.422 E.01546
G1 X181.857 Y153.152 E.02565
;PATH_TASK id=1129 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.617416
G1 F7832.963
G1 X182.178 Y153.065 E.01587
G1 X181.553 Y153.036 E.02989
;PATH_TASK id=1130 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.59611
G1 F8134.642
G2 X179.678 Y153.054 I-.512 J45.26 E.08624
G1 X180.432 Y153.28 E.03623
G1 X180.937 Y153.545 E.02622
G1 X181.089 Y153.642 E.00831
;PATH_TASK id=1131 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X178.593 Y153.082 F24000
;WIDTH:0.658508
G1 F7310.084
G1 X178.963 Y153.062 E.01897
;PATH_TASK id=1132 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.620541
G1 F7790.581
G3 X179.638 Y153.053 I.391 J3.812 E.03247
;PATH_TASK id=1133 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X176.832 Y153.89 F24000
;WIDTH:0.364153
G1 F12000
G1 X177.35 Y153.401 E.01904
G1 X177.462 Y153.332 E.00353
G1 X176.832 Y153.332 E.01684
G1 X176.832 Y153.85 E.01385
;PATH_TASK id=1134 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X176.499 Y155.274 F24000
;WIDTH:0.496427
G1 F9922.685
G1 X176.671 Y154.892 E.0158
;PATH_TASK id=1135 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.453013
G1 F10973.131
G1 X176.844 Y154.51 E.01429
G1 X177.114 Y154.119 E.0162
G1 X177.539 Y153.712 E.02007
G1 X178.11 Y153.364 E.02281
;PATH_TASK id=1136 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.472845
G1 F10466.949
G1 X178.207 Y153.308 E.004
;PATH_TASK id=1137 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.518536
G1 F9461.413
G1 X178.303 Y153.251 E.00442
;PATH_TASK id=1138 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.564228
G1 F8632.141
G1 X178.4 Y153.195 E.00485
;PATH_TASK id=1139 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.609919
G1 F7936.523
G1 X178.496 Y153.138 E.00527
;PATH_TASK id=1140 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.655611
G1 F7344.656
G1 X178.593 Y153.082 E.00569
;PATH_TASK id=1141 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X178.513 Y153.059 E.00421
;PATH_TASK id=1142 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.609919
G1 F7936.523
G1 X178.434 Y153.036 E.00389
;PATH_TASK id=1143 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.564228
G1 F8632.141
G1 X178.355 Y153.013 E.00358
;PATH_TASK id=1144 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.518536
G1 F9461.413
G1 X178.275 Y152.991 E.00327
;PATH_TASK id=1145 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.453691
G1 F10955.025
G1 X178.196 Y152.968 E.00282
G1 X176.468 Y152.968 E.05903
G2 X176.486 Y155.116 I39.496 J.732 E.07338
;PATH_TASK id=1146 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.487203
G1 F10128.678
G1 X176.496 Y155.234 E.00437
;PATH_TASK id=1147 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X176.471 Y156.815 F24000
;WIDTH:0.435537
G1 F11461.551
G1 X176.449 Y155.911 E.02954
;PATH_TASK id=1148 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.438096
G1 F11387.331
G1 X176.473 Y155.612 E.00984
;PATH_TASK id=1149 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.462698
G1 F10719.952
G1 X176.496 Y155.313 E.01045
;PATH_TASK id=1150 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X176.488 Y156.896 F24000
;WIDTH:0.48295
G1 F10226.584
G2 X176.486 Y158.708 I311.206 J1.203 E.0663
G1 X176.765 Y158.291 E.01834
G1 X177.033 Y158.088 E.01231
G3 X176.656 Y157.462 I1.597 J-1.389 E.02686
G1 X176.5 Y156.934 E.02015
;PATH_TASK id=1151 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X176.831 Y160.239 F24000
;WIDTH:0.556352
G1 F8764.558
G1 X176.765 Y160.072 E.00767
;PATH_TASK id=1152 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.598419
G1 F8100.829
G1 X176.699 Y159.905 E.0083
G1 X176.695 Y159.285 E.02864
;PATH_TASK id=1153 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.578883
G1 F8396.107
G1 X176.748 Y159.152 E.00638
;PATH_TASK id=1154 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.533414
G1 F9174.424
G1 X176.801 Y159.019 E.00584
;PATH_TASK id=1155 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.487946
G1 F10111.783
G1 X176.855 Y158.886 E.0053
;PATH_TASK id=1156 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.450202
G1 F11048.877
G1 X177.166 Y158.499 E.01683
G1 X177.573 Y158.309 E.0152
G1 X177.846 Y158.299 E.00927
G1 X177.546 Y158.057 E.01308
G1 X177.194 Y157.594 E.01968
G1 X177.062 Y157.333 E.0099
G1 X176.876 Y156.744 E.02092
G1 X176.838 Y155.911 E.02826
G1 X176.931 Y155.346 E.01936
G1 X177.217 Y154.672 E.02482
G1 X177.405 Y154.404 E.0111
G1 X177.75 Y154.06 E.0165
G1 X178.322 Y153.712 E.02266
G1 X178.697 Y153.593 E.01331
G1 X179.429 Y153.521 E.02493
G1 X179.652 Y153.55 E.00762
G1 X180.3 Y153.737 E.02285
G1 X180.787 Y154.007 E.01883
G1 X181.304 Y154.447 E.02301
G1 X181.48 Y153.978 E.01697
G1 X181.623 Y153.82 E.00719
G1 X181.95 Y153.624 E.01294
G1 X182.31 Y153.559 E.01237
G1 X183.21 Y153.602 E.03053
G1 X183.701 Y153.884 E.01917
G1 X183.873 Y154.102 E.00941
G1 X183.939 Y153.753 E.01201
G1 X183.939 Y152.561 E.0404
G1 X176.061 Y152.561 E.26682
G1 X176.068 Y158.791 E.21101
;PATH_TASK id=1157 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.487947
G1 F10111.761
G1 X176.091 Y158.957 E.0062
;PATH_TASK id=1158 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.533417
G1 F9174.368
G1 X176.114 Y159.123 E.00683
;PATH_TASK id=1159 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.598233
G1 F8103.549
G3 X176.137 Y159.567 I-1.614 J.306 E.02057
G1 X176.218 Y159.588 E.00391
G1 X176.584 Y159.953 E.02387
;PATH_TASK id=1160 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.586765
G1 F8274.424
G1 X176.694 Y160.081 E.00764
;PATH_TASK id=1161 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.571558
G1 F8512.442
G1 X176.804 Y160.209 E.00742
;PATH_TASK id=1162 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X178.463 Y162.023 F24000
;WIDTH:0.38292
G1 F12000
G1 X178.154 Y161.687 E.01291
;PATH_TASK id=1163 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.402912
G1 X178.056 Y161.558 E.00486
;PATH_TASK id=1164 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.442896
G1 F11250.696
G1 X177.957 Y161.429 E.00539
;PATH_TASK id=1165 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.482879
G1 F10228.231
G1 X177.859 Y161.3 E.00593
;PATH_TASK id=1166 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.527485
G1 F9286.681
G1 X177.76 Y161.171 E.00654
G3 X176.918 Y160.345 I9.551 J-10.58 E.04756
;PATH_TASK id=1167 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X181.1 Y162.847 F24000
;WIDTH:0.446251
G1 F11157.088
G1 X180.603 Y162.35 E.02357
G1 X180.219 Y162.588 E.01513
G1 X179.772 Y162.676 E.01529
G1 X179.937 Y162.807 E.00706
G3 X181.06 Y162.844 I.248 J9.373 E.03771
;PATH_TASK id=1168 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X182.55 Y163.702 F24000
;WIDTH:0.444625
G1 F11202.264
G3 X180.59 Y161.764 I45.485 J-47.974 E.09205
G1 X180.43 Y161.976 E.00888
G1 X180.073 Y162.208 E.01421
G1 X179.723 Y162.277 E.01193
G1 X178.774 Y162.225 E.03173
G1 X178.699 Y162.195 E.00272
G1 X179.439 Y162.916 E.03451
G1 X179.705 Y163.219 E.01348
G1 X180.287 Y163.203 E.01943
G1 X181.111 Y163.255 E.02758
G1 X181.847 Y163.401 E.02507
G1 X182.513 Y163.686 E.0242
;PATH_TASK id=1169 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X183.309 Y164.402 F24000
;WIDTH:0.38292
G1 F12000
G1 X183.056 Y164.13 E.01048
G1 X182.615 Y163.753 E.01643
;PATH_TASK id=1170 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F12000
G1 X183.056 Y164.13 E-.0977
G1 X183.309 Y164.402 E-.0623
;WIPE_END
G1 X183.009 Y164.624 F24000
G1 X183.119 Y164.772
G1 X183.22 Y164.944
G1 X183.3 Y165.125
G1 X183.362 Y165.313
G1 X183.404 Y165.507
G1 X183.429 Y165.706
G1 X183.437 Y165.909
G1 X183.107 Y185.284
G1 X183.095 Y185.489
G1 X183.067 Y185.689
G1 X183.033 Y185.845
G1 X182.976 Y186.033
G1 X180.496 Y192.786
G1 X180.246 Y195.307
G1 X180.308 Y195.466
G1 X180.125 Y195.657
G1 X180.204 Y195.733
G1 E.8 F1800
M204 P2500
;TYPE:Outer wall
;WIDTH:0.537622
G1 F9096.384
G1 X179.09 Y194.931 E.05645
G1 X180.217 Y194.95 E.04637
G1 X180.204 Y195.693 E.03055
;PATH_TASK id=1171 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F9096.384
G1 X179.379 Y195.129 E-.16
;WIPE_END
G1 X179.351 Y195.206 F24000
G1 X179.693 Y193.448
G1 X180.798 Y187.543
G1 X181.267 Y185.505
G1 X181.194 Y185.427
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.560034
G1 F8702.143
G1 X180.947 Y185.534 E.01157
G1 X180.678 Y185.544 E.0116
G1 X180.471 Y185.415 E.01046
G1 X180.433 Y185.24 E.00772
G1 X180.523 Y185.09 E.00754
;PATH_TASK id=1172 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.564147
G1 F8633.474
G1 X180.797 Y185.02 E.01224
G1 X181.156 Y185.092 E.01585
;PATH_TASK id=1173 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.560034
G1 F8702.143
G1 X181.269 Y185.24 E.00801
;PATH_TASK id=1171 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X181.209 Y185.389 E.00694
;PATH_TASK id=1174 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
M204 T2500
G1 X181.309 Y185.459 F24000
G1 X181.285 Y185.488
G1 X181.285 Y185.488
G1 X181.558 Y185.758
M204 P2500
;TYPE:Outer wall
;WIDTH:0.449999
G1 F10200
G1 X181.36 Y185.907 E.0084
G1 X180.98 Y186.032 E.01352
G1 X180.585 Y186.026 E.01337
G1 X180.29 Y185.913 E.01069
G1 X180.134 Y185.762 E.00735
G1 X179.968 Y185.498 E.01058
G1 X179.943 Y185.181 E.01075
G1 X180.034 Y184.906 E.00981
G1 X180.237 Y184.687 E.0101
G3 X180.646 Y184.548 I.729 J1.474 E.01466
G1 X181.098 Y184.569 E.01531
G1 X181.421 Y184.68 E.01155
G1 X181.672 Y184.947 E.0124
G1 X181.746 Y185.163 E.00775
G1 X181.722 Y185.492 E.01115
G1 X181.579 Y185.724 E.00924
;PATH_TASK id=1175 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X181.36 Y185.907 E-.04571
G1 X180.98 Y186.032 E-.06389
G1 X180.665 Y186.027 E-.0504
;WIPE_END
G1 X180.715 Y185.657 F24000
G1 X180.73 Y184.919
G1 X180.838 Y183.068
G1 X181.142 Y177.864
G1 X181.297 Y175.985
G1 X181.259 Y175.866
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.588166
G1 F8253.155
G1 X181.002 Y175.865 E.01163
G1 X180.884 Y175.742 E.00776
G1 X180.891 Y175.479 E.01193
G1 X181.033 Y175.342 E.00893
G1 X181.196 Y175.33 E.00739
G1 X181.353 Y175.395 E.00774
G1 X181.416 Y175.574 E.0086
G1 X181.369 Y175.787 E.0099
G1 X181.291 Y175.843 E.00432
;PATH_TASK id=1176 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
M204 T2500
G1 X181.344 Y175.967 F24000
G1 X181.315 Y175.979
G1 X181.315 Y175.979
G1 X181.454 Y176.337
M204 P2500
;TYPE:Outer wall
;WIDTH:0.449999
G1 F10200
G1 X181.118 Y176.396 E.01155
G1 X180.803 Y176.333 E.01085
G1 X180.568 Y176.17 E.0097
G1 X180.41 Y175.925 E.00989
G1 X180.357 Y175.609 E.01084
G1 X180.423 Y175.281 E.01133
G1 X180.591 Y175.037 E.01002
G1 X180.846 Y174.87 E.01031
G3 X181.281 Y174.84 I.311 J1.329 E.01481
G1 X181.56 Y174.927 E.00991
G1 X181.808 Y175.156 E.0114
G1 X181.915 Y175.44 E.01029
G1 X181.911 Y175.772 E.01121
G3 X181.717 Y176.154 I-1.544 J-.544 E.01455
G1 X181.486 Y176.314 E.0095
;PATH_TASK id=1177 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X181.118 Y176.396 E-.06046
G1 X180.803 Y176.333 E-.05129
G1 X180.568 Y176.17 E-.04583
G1 X180.56 Y176.158 E-.00242
;WIPE_END
G1 X180.842 Y175.903 F24000
G1 X179.013 Y175.506
G1 X178.999 Y175.508
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.365772
G1 F10200
G1 X178.968 Y175.707 E.0054
G1 X178.852 Y175.763 E.00346
G1 X178.722 Y175.714 E.00374
G1 X178.687 Y175.531 E.00498
G1 X178.766 Y175.408 E.00395
G1 X178.918 Y175.392 E.00409
G1 X178.999 Y175.508 E.0038
;PATH_TASK id=1178 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
M204 T2500
G1 X179.013 Y175.506 F24000
G1 X178.712 Y175.719
G1 X178.712 Y175.719
G1 X178.419 Y175.966
M204 P2500
;TYPE:Outer wall
;WIDTH:0.449999
G1 F10200
G1 X178.316 Y175.778 E.00723
G1 X178.311 Y175.442 E.01138
G1 X178.407 Y175.225 E.00803
G1 X178.561 Y175.08 E.00718
G1 X178.767 Y175.002 E.00743
G1 X178.967 Y175.008 E.0068
G1 X179.174 Y175.102 E.00769
G1 X179.319 Y175.266 E.00741
G1 X179.388 Y175.508 E.00854
G1 X179.341 Y175.853 E.01178
G1 X179.213 Y176.024 E.00723
G1 X179.025 Y176.131 E.00734
G1 X178.796 Y176.159 E.0078
G1 X178.589 Y176.104 E.00724
G1 X178.45 Y175.991 E.00606
;PATH_TASK id=1179 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X178.316 Y175.778 E-.04019
G1 X178.311 Y175.442 E-.0538
G1 X178.407 Y175.225 E-.03794
G1 X178.534 Y175.105 E-.02807
;WIPE_END
G1 X178.749 Y175.402 F24000
G1 X178.608 Y173.534
G1 X177.042 Y169.801
G1 X177.065 Y168.43
G1 X178.87 Y167.97
G1 X178.84 Y165.87
G1 X178.968 Y165.873
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.583128
G1 F8330.125
G1 X178.965 Y165.867 E.0003
G1 X179.058 Y165.764 E.00622
G1 X179.408 Y165.66 E.01643
G1 X179.922 Y165.616 E.02318
;PATH_TASK id=1180 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.585013
G1 F8301.159
G3 X180.988 Y165.671 I-.008 J10.509 E.04812
;PATH_TASK id=1181 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.575798
G1 F8444.71
G1 X181.452 Y165.778 E.02109
G1 X181.588 Y165.914 E.00852
;PATH_TASK id=1182 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
G1 X181.479 Y166.038 E.00732
G1 X180.977 Y166.153 E.02278
;PATH_TASK id=1183 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.585013
G1 F8301.159
G3 X179.945 Y166.158 I-.56 J-8.158 E.04657
;PATH_TASK id=1184 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.584173
G1 F8314.042
G1 X179.437 Y166.101 E.02301
;PATH_TASK id=1179 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
;WIDTH:0.583128
G1 F8330.125
G1 X179.009 Y165.952 E.02036
G1 X178.987 Y165.908 E.0022
;PATH_TASK id=1185 conformal=0 surface=-1 source_layer=2 shell_offset=-1.000000
M204 T2500
G1 X178.886 Y166.009 F24000
G1 X178.853 Y165.963
G1 X178.853 Y165.963
G1 X178.502 Y166.113
M204 P2500
;TYPE:Outer wall
;WIDTH:0.449999
G1 F10200
G1 X178.457 Y165.901 E.00734
G1 X178.499 Y165.657 E.00839
G1 X178.627 Y165.466 E.00778
G1 X178.86 Y165.295 E.00977
G1 X179.344 Y165.164 E.01697
G1 X179.87 Y165.123 E.01786
G1 X180.782 Y165.141 E.03088
G1 X181.357 Y165.23 E.0197
G1 X181.742 Y165.364 E.0138
G3 X182.032 Y165.687 I-.723 J.943 E.01478
G1 X182.081 Y166.025 E.01156
G1 X181.985 Y166.245 E.0081
G1 X181.855 Y166.369 E.00611
G1 X181.596 Y166.523 E.01018
G1 X181.032 Y166.642 E.01953
G3 X179.398 Y166.595 I-.587 J-7.974 E.05542
G1 X178.986 Y166.489 E.0144
G1 X178.647 Y166.311 E.01295
G1 X178.525 Y166.145 E.00697
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:0.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;0.8
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X178.457 Y165.901 E-.04059
G1 X178.499 Y165.657 E-.03965
G1 X178.627 Y165.466 E-.03678
G1 X178.844 Y165.307 E-.04298
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;0.8
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=1186 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
M204 T5000
M486 S0
G1 X184.346 Y207.846 Z.8 F24000
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
G1 F10200
G1 X175.654 Y207.846 E.29424
G1 X175.654 Y152.154 E1.88514
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y207.806 E1.88378
;PATH_TASK id=1187 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
M204 T2500
G1 X184.389 Y207.806 F24000
G1 X184.389 Y207.889
G1 X184.775 Y208.275
M204 P2500
;TYPE:Outer wall
G1 F10200
G1 X175.225 Y208.275 E.32326
G1 X175.225 Y151.725 E1.91415
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y208.235 E1.91279
;PATH_TASK id=1188 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X183.775 Y208.239 E-.16
;WIPE_END
G1 X183.775 Y207.889 F24000
G1 X184.389 Y207.889
G1 X184.389 Y205.777
G1 X183.837 Y205.777
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.633266
G1 F7622.654
G1 X183.814 Y205.834 E.003
;PATH_TASK id=1189 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.590017
G1 F8225.238
G1 X183.792 Y205.891 E.00278
;PATH_TASK id=1190 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.546768
G1 F8931.268
G1 X183.769 Y205.948 E.00256
;PATH_TASK id=1191 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.503519
G1 F9769.887
G1 X183.747 Y206.005 E.00234
;PATH_TASK id=1192 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.460271
G1 F10782.313
G1 X183.724 Y206.061 E.00212
;PATH_TASK id=1193 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.417022
G1 F12000
G1 X183.702 Y206.118 E.0019
;PATH_TASK id=1194 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.366206
G1 X183.679 Y206.175 E.00164
G1 X183.641 Y206.818 E.01732
;PATH_TASK id=1195 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.397195
G1 X183.555 Y207.076 E.008
;PATH_TASK id=1196 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.44702
G1 F11135.859
G1 X183.469 Y207.333 E.00912
G1 X183.394 Y207.438 E.00434
G1 X183.938 Y207.438 E.0183
;PATH_TASK id=1197 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.436819
G1 F11424.248
G1 X183.954 Y207.183 E.00839
;PATH_TASK id=1198 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.405865
G1 F12000
G1 X183.969 Y206.927 E.00773
;PATH_TASK id=1199 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.371268
G1 X183.988 Y206.177 E.02047
;PATH_TASK id=1200 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.373773
G1 X183.969 Y206.126 E.00152
;PATH_TASK id=1201 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.417022
G1 X183.949 Y206.074 E.00172
;PATH_TASK id=1202 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.460271
G1 F10782.313
G1 X183.93 Y206.022 E.00192
;PATH_TASK id=1203 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.503519
G1 F9769.887
G1 X183.91 Y205.97 E.00212
;PATH_TASK id=1204 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.546768
G1 F8931.268
G1 X183.89 Y205.918 E.00232
;PATH_TASK id=1205 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.590017
G1 F8225.238
G1 X183.871 Y205.867 E.00252
;PATH_TASK id=1206 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.611641
G1 F7912.49
G1 X183.851 Y205.815 E.00262
;PATH_TASK id=1207 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X183.837 Y205.777 F24000
;WIDTH:0.654613
G1 F7356.64
G1 X183.858 Y203.094 E.13647
;PATH_TASK id=1208 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X183.558 Y200.916 F24000
;WIDTH:0.398714
G1 F12000
G1 X183.083 Y201.391 E.01985
G1 X183.439 Y201.609 E.01236
G1 X183.558 Y201.731 E.00502
G1 X183.558 Y200.956 E.02292
;PATH_TASK id=1209 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X183.939 Y199.995 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X182.397 Y201.538 E.07384
G1 X182.667 Y201.603 E.00939
G1 X183.117 Y201.839 E.01722
G1 X183.456 Y202.186 E.01642
G1 X183.68 Y202.642 E.01718
;PATH_TASK id=1210 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.470932
G1 F10513.726
G1 X183.724 Y202.745 E.00399
;PATH_TASK id=1211 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.512798
G1 F9576.961
G1 X183.768 Y202.848 E.00438
;PATH_TASK id=1212 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.554664
G1 F8793.47
G1 X183.812 Y202.951 E.00477
;PATH_TASK id=1213 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.596529
G1 F8128.479
G1 X183.856 Y203.055 E.00517
;PATH_TASK id=1214 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X183.877 Y202.936 E.00553
;PATH_TASK id=1215 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.554664
G1 F8793.47
G1 X183.898 Y202.818 E.00511
;PATH_TASK id=1216 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.512798
G1 F9576.961
G1 X183.918 Y202.7 E.00469
;PATH_TASK id=1217 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.451886
G1 F11003.373
G1 X183.939 Y202.581 E.00409
G1 X183.939 Y200.035 E.08658
;PATH_TASK id=1218 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X181.976 Y201.671 F24000
;WIDTH:0.45
G1 F11054.338
G1 X184 Y199.646 E.09691
G1 X184 Y199.071 E.01949
G1 X181.59 Y201.481 E.11538
G1 X181.39 Y201.487 E.00676
G1 X181.206 Y201.517 E.00631
G1 X181.061 Y201.555 E.00509
G1 X180.865 Y201.63 E.0071
G1 X184 Y198.495 E.15008
G1 X184 Y197.919 E.01949
G1 X180.049 Y201.87 E.18913
G1 X179.665 Y201.679 E.01454
G1 X184 Y197.343 E.20755
G1 X184 Y196.768 E.01949
G1 X179.232 Y201.536 E.22826
G1 X179.006 Y201.485 E.00786
G1 X178.744 Y201.449 E.00895
G1 X184 Y196.192 E.25164
G1 X184 Y195.616 E.01949
G1 X182.688 Y196.929 E.06282
G2 X182.698 Y196.343 I-11.896 J-.502 E.01984
G1 X183.127 Y195.914 E.02051
;PATH_TASK id=1219 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X181.297 Y198.32 F24000
G1 F11054.338
G1 X178.17 Y201.447 E.14967
G1 X177.764 Y201.509 E.01391
G1 X177.44 Y201.601 E.01142
G1 X180.512 Y198.529 E.14705
G1 X180.265 Y198.516 E.00837
G1 X180 Y198.465 E.00911
G1 X176 Y202.466 E.19152
G1 X176 Y201.89 E.01949
G1 X179.598 Y198.292 E.17227
G1 X179.259 Y198.055 E.014
G1 X175.816 Y201.498 E.16481
;PATH_TASK id=1220 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X184.143 Y195.399 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.339975
G1 F7200
G1 X184.087 Y195.338 E.00205
;PATH_TASK id=1221 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.38374
G1 X184.03 Y195.276 E.00236
;PATH_TASK id=1222 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.427506
G1 X183.974 Y195.215 E.00266
;PATH_TASK id=1223 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.47265
G1 X183.918 Y195.154 E.00297
G1 X183.841 Y195.203 E.00325
;PATH_TASK id=1224 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.433315
G1 X183.796 Y195.269 E.0026
;PATH_TASK id=1225 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.395106
G1 X183.734 Y195.361 E.00324
;PATH_TASK id=1226 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.352457
G1 X183.668 Y195.458 E.00303
;PATH_TASK id=1227 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.311054
G1 X183.593 Y195.559 E.0028
;PATH_TASK id=1228 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.261214
G1 X183.372 Y195.815 E.00614
G1 X183.193 Y195.981 E.00443
;PATH_TASK id=1229 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X179.072 Y197.666 F24000
;WIDTH:0.449956
G1 F7200
G1 X175.857 Y200.881 E.15388
;PATH_TASK id=1230 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X181.706 Y198.18 F24000
;WIDTH:0.19847
G1 F7200
G3 X181.367 Y198.39 I-5.482 J-8.47 E.00515
;PATH_TASK id=1231 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X181.702 Y198.175 F24000
;WIDTH:0.0997212
G1 F7200
G3 X181.373 Y198.396 I-10.874 J-15.812 E.00187
;PATH_TASK id=1232 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X182.614 Y197.119 F24000
;WIDTH:0.168071
G1 F7200
G1 X182.448 Y197.368 E.00312
;PATH_TASK id=1233 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.148529
G1 X182.384 Y197.462 E.001
;PATH_TASK id=1234 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.129609
G1 X182.321 Y197.556 E.00082
;PATH_TASK id=1235 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X182.607 Y197.115 F24000
;WIDTH:0.195078
G1 F7200
G1 X182.329 Y197.562 E.00665
;PATH_TASK id=1236 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X182.599 Y197.112 F24000
;WIDTH:0.250378
G1 F7200
G3 X182.345 Y197.56 I-11.698 J-6.329 E.00888
;PATH_TASK id=1237 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X180.697 Y201.745 F24000
;WIDTH:0.326616
G1 F7200
G1 X180.455 Y201.947 E.00744
G1 X180.299 Y202.105 E.00525
;PATH_TASK id=1238 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.29688
G1 X180.261 Y202.109 E.0008
;PATH_TASK id=1239 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.272632
G1 X180.079 Y202.127 E.00349
;PATH_TASK id=1240 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.012 Y202.691 F24000
;WIDTH:0.138845
G1 F7200
G1 X175.874 Y203.243 E.00454
;PATH_TASK id=1241 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.022 Y202.695 F24000
;WIDTH:0.24363
G1 F7200
G1 X175.867 Y203.241 E.00947
;PATH_TASK id=1242 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X177.269 Y201.712 F24000
;WIDTH:0.30047
G1 F7200
G1 X177.066 Y201.856 E.00534
;PATH_TASK id=1243 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.271753
G1 X177.009 Y201.899 E.00135
;PATH_TASK id=1244 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.240479
G1 X176.871 Y202.007 E.00289
;PATH_TASK id=1245 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.199462
G1 X176.704 Y202.147 E.00283
;PATH_TASK id=1246 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.166597
G1 X176.427 Y202.406 E.0039
G1 X176.2 Y202.643 E.00337
G3 X176.077 Y202.779 I-.727 J-.533 E.00189
;PATH_TASK id=1247 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.222433
G1 X176.039 Y202.799 E.00064
;PATH_TASK id=1248 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.264726
G1 X176.001 Y202.818 E.00079
;PATH_TASK id=1249 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.285873
G1 X175.857 Y202.862 E.00304
;PATH_TASK id=1250 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.111 Y206.465 F24000
M204 P1500
;TYPE:Bridge
;WIDTH:0.4
G1 F3000
G1 X177.392 Y207.33 E.0459
G1 X177.665 Y207.434 E.00865
G1 X178.023 Y207.525 E.01099
G1 X178.318 Y207.525 E.00876
G1 X176.024 Y205.974 E.08223
G1 X175.975 Y205.853 E.0039
G1 X175.975 Y205.51 E.01016
G1 X178.909 Y207.494 E.10517
G1 X179.131 Y207.4 E.00716
G1 X179.272 Y207.309 E.005
G1 X175.975 Y205.079 E.11819
G1 X175.975 Y204.648 E.0128
G1 X179.514 Y207.041 E.12686
G1 X179.693 Y206.731 E.01063
G1 X175.975 Y204.217 E.13325
G1 X175.975 Y203.786 E.0128
G1 X181.506 Y207.525 E.19824
G1 X182.144 Y207.525 E.01893
G1 X176.027 Y203.39 E.21922
G1 X176.193 Y203.072 E.01067
G1 X182.78 Y207.525 E.23609
G1 X182.898 Y207.441 E.00429
G1 X183.05 Y207.276 E.00666
G1 X176.4 Y202.781 E.23833
G1 X176.649 Y202.518 E.01075
G1 X183.223 Y206.962 E.23561
G1 X183.29 Y206.793 E.0054
G1 X183.331 Y206.604 E.00574
G1 X176.939 Y202.283 E.22909
G1 X177.28 Y202.082 E.01174
G1 X183.346 Y206.183 E.21741
G1 X183.353 Y205.757 E.01265
G1 X177.685 Y201.925 E.20315
G1 X177.95 Y201.861 E.0081
G1 X178.181 Y201.829 E.00692
G1 X183.361 Y205.331 E.18564
G1 X183.368 Y204.905 E.01265
G1 X178.844 Y201.847 E.16213
G1 X179.208 Y201.924 E.01105
G1 X179.484 Y202.018 E.00866
G1 X179.701 Y202.115 E.00707
G1 X179.905 Y202.227 E.0069
G1 X180.355 Y202.529 E.0161
G1 X180.405 Y202.471 E.00228
G1 X183.375 Y204.479 E.10645
G1 X183.382 Y204.053 E.01265
G1 X180.644 Y202.201 E.09814
G1 X180.829 Y202.07 E.00674
G1 X180.978 Y201.996 E.00494
G1 X183.39 Y203.627 E.08643
G1 X183.397 Y203.2 E.01265
G1 X181.425 Y201.868 E.07066
G1 X181.51 Y201.862 E.00253
G3 X182.068 Y201.871 I.09 J11.366 E.01657
G1 X183.514 Y202.849 E.05183
;PATH_TASK id=1251 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X180.682 Y198.311 F24000
G1 F3000
G1 X176.047 Y194.974 E.16958
G1 X175.975 Y194.681 E.00896
G3 X175.975 Y194.482 I.669 J-.102 E.00594
G1 X181.074 Y198.153 E.18657
G1 X181.295 Y198.116 E.00664
G1 X181.521 Y198.035 E.00714
G1 X175.975 Y194.042 E.20292
G3 X176.036 Y193.646 I1.17 J-.021 E.01195
G1 X181.861 Y197.839 E.21311
G1 X181.989 Y197.71 E.0054
G1 X182.091 Y197.565 E.00526
G1 X176.188 Y193.315 E.21596
G1 X176.288 Y193.172 E.00519
G1 X176.418 Y193.041 E.00548
G1 X182.242 Y197.234 E.21306
G1 X182.293 Y197.031 E.0062
G1 X182.308 Y196.841 E.00566
G1 X176.759 Y192.846 E.203
G1 X176.983 Y192.766 E.00705
G1 X177.207 Y192.729 E.00675
G1 X182.315 Y196.406 E.18689
G1 X182.322 Y196.027 E.01128
G1 X182.377 Y196.011 E.00171
G1 X177.828 Y192.736 E.16644
G1 X178.454 Y192.746 E.01859
G1 X182.794 Y195.871 E.15878
G1 X182.909 Y195.816 E.00379
G1 X183.027 Y195.742 E.00414
G1 X183.122 Y195.668 E.00359
G1 X179.08 Y192.757 E.14791
G1 X179.391 Y192.762 E.00925
G1 X179.493 Y192.615 E.00533
G1 X183.342 Y195.386 E.14081
G1 X183.487 Y195.05 E.01085
G1 X179.752 Y192.361 E.13667
G1 X179.907 Y192.269 E.00536
G1 X180.117 Y192.184 E.00673
G1 X183.542 Y194.65 E.12531
G1 X183.55 Y194.215 E.01291
G1 X180.622 Y192.108 E.10709
G3 X181.209 Y192.125 I.181 J3.862 E.01743
G1 X181.274 Y192.137 E.00197
G1 X183.686 Y193.874 E.08826
;PATH_TASK id=1252 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X183.926 Y194.837 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.476483
G1 F10379.135
M106 S255
G1 X183.936 Y194.049 E.0284
;PATH_TASK id=1253 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X183.479 Y191.321 F24000
;WIDTH:0.557213
G1 F8749.876
G1 X182.752 Y192.047 E.04396
G1 X183.102 Y192.169 E.01585
G1 X183.479 Y192.367 E.0182
G1 X183.479 Y191.361 E.04304
;PATH_TASK id=1254 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X183.939 Y190.208 F24000
;WIDTH:0.451372
G1 F11017.216
G1 X182.066 Y192.082 E.08998
G1 X182.236 Y192.206 E.00714
G1 X182.429 Y192.448 E.01052
G1 X182.888 Y192.577 E.01619
G1 X183.321 Y192.816 E.0168
G1 X183.61 Y193.125 E.01439
G1 X183.834 Y193.581 E.01723
G1 X183.934 Y194.009 E.01494
G2 X183.939 Y190.248 I-348.522 J-2.423 E.12773
;PATH_TASK id=1255 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X181.761 Y192.099 F24000
;WIDTH:0.45
G1 F11054.338
G1 X184 Y189.859 E.10722
G1 X184 Y189.284 E.01949
G1 X181.489 Y191.795 E.1202
G1 X181.257 Y191.746 E.00803
G1 X180.977 Y191.732 E.00951
G1 X184 Y188.708 E.14474
G1 X184 Y188.132 E.01949
G1 X180.178 Y191.955 E.18298
;PATH_TASK id=1256 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X179 Y192.557 F24000
G1 F11054.338
G1 X184 Y187.557 E.23935
G1 X184 Y186.981 E.01949
G1 X178.614 Y192.367 E.25783
G1 X178.048 Y192.357 E.01916
G1 X182.083 Y188.323 E.19314
G1 X181.698 Y188.452 E.01374
G1 X181.284 Y188.546 E.0144
G1 X177.482 Y192.348 E.18196
G2 X176.847 Y192.407 I-.156 J1.758 E.02171
G1 X180.632 Y188.623 E.18115
G1 X180.039 Y188.639 E.02005
G1 X176.021 Y192.657 E.19235
G1 X176 Y192.641 E.00091
G1 X176 Y192.103 E.01821
G1 X179.662 Y188.441 E.17531
;PATH_TASK id=1257 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.755 Y192.652 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.285326
G1 F7200
G1 X176.565 Y192.589 E.00405
G1 X176.44 Y192.68 E.00311
M73 P82 R7
;PATH_TASK id=1258 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.229737
G1 X176.207 Y192.877 E.00473
;PATH_TASK id=1259 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.204697
G1 X176.16 Y192.923 E.00088
G1 X176.161 Y193.041 E.0016
;PATH_TASK id=1260 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X180.105 Y191.882 F24000
;WIDTH:0.126956
G1 F7200
G2 X179.747 Y192.128 I3.673 J5.73 E.00304
;PATH_TASK id=1261 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X181.712 Y192.079 F24000
;WIDTH:0.102809
G1 F7200
G1 X181.616 Y192.013 E.00058
G1 X181.62 Y191.958 E.00027
;PATH_TASK id=1262 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X179.152 Y188.375 F24000
;WIDTH:0.449956
G1 F7200
G1 X175.857 Y191.67 E.15773
;PATH_TASK id=1263 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X179.4 Y188.415 F24000
;WIDTH:0.384405
G1 F7200
G1 X178.546 Y188.693 E.0255
;PATH_TASK id=1264 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X179.408 Y188.407 F24000
;WIDTH:0.30661
G1 F7200
G1 X178.533 Y188.706 E.02027
;PATH_TASK id=1265 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X181.138 Y188.382 F24000
;WIDTH:0.153435
G1 F7200
G1 X180.818 Y188.54 E.00328
;PATH_TASK id=1266 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X183.931 Y186.53 F24000
;WIDTH:0.442572
G1 F7200
G1 X183.89 Y186.564 E.00176
;PATH_TASK id=1267 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.393044
G1 X183.837 Y186.625 E.00236
;PATH_TASK id=1268 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.364351
G1 X183.818 Y186.652 E.00089
;PATH_TASK id=1269 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.341834
G1 X183.756 Y186.738 E.00262
;PATH_TASK id=1270 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.307098
G1 X183.689 Y186.83 E.00251
;PATH_TASK id=1271 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.266852
G1 X183.577 Y186.974 E.0034
;PATH_TASK id=1272 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.218419
G1 X183.396 Y187.19 E.0041
;PATH_TASK id=1273 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.183121
G1 X183.059 Y187.544 E.0057
G1 X182.712 Y187.859 E.00546
;PATH_TASK id=1274 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.236543
G1 X182.566 Y187.977 E.00302
;PATH_TASK id=1275 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.266967
G1 X182.497 Y188.03 E.00163
;PATH_TASK id=1276 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.298718
G1 X182.367 Y188.127 E.00345
G1 X182.164 Y188.072 E.00448
;PATH_TASK id=1277 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X183.976 Y186.24 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.38292
G1 F12000
G1 X184.053 Y185.362 E.02493
G1 X184.042 Y184.87 E.01392
;PATH_TASK id=1278 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X182.864 Y182.131 F24000
;WIDTH:0.532351
G1 F9194.35
G1 X183.491 Y182.601 E.03189
G1 X183.491 Y181.504 E.04464
G1 X182.892 Y182.103 E.03449
;PATH_TASK id=1279 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X182.103 Y182.258 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X182.705 Y182.555 E.0227
G1 X183.185 Y182.925 E.02053
G1 X183.546 Y183.328 E.01833
G1 X183.829 Y183.785 E.01819
G1 X183.939 Y184.057 E.00994
G1 X183.939 Y180.422 E.12307
G1 X182.132 Y182.229 E.08653
;PATH_TASK id=1280 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X184.184 Y179.889 F24000
;WIDTH:0.45
G1 F11054.338
G1 X181.895 Y182.178 E.10955
G1 X181.714 Y182.124 E.0064
G1 X181.434 Y182.063 E.00968
G1 X184 Y179.497 E.12283
G1 X184 Y178.921 E.01949
G1 X180.914 Y182.007 E.14773
G1 X180.564 Y182.01 E.01187
G1 X180.314 Y182.031 E.00847
G1 X184 Y178.345 E.17645
G1 X184 Y177.77 E.01949
G1 X179.553 Y182.217 E.21289
G1 X179.443 Y182.26 E.00399
G1 X179.265 Y182.182 E.00657
G1 X179.069 Y182.126 E.00692
G1 X182.42 Y178.774 E.16044
G1 X182.344 Y178.698 E.00367
G1 X182.042 Y178.803 E.01083
G1 X181.747 Y178.872 E.01025
G1 X178.558 Y182.061 E.15266
G1 X178.237 Y182.101 E.01095
G1 X177.849 Y182.194 E.0135
G1 X181.117 Y178.926 E.15643
G1 X180.885 Y178.92 E.00784
G1 X180.583 Y178.885 E.01031
G1 X176 Y183.468 E.21939
G1 X176 Y182.892 E.01949
G1 X180.12 Y178.772 E.19725
G1 X179.88 Y178.681 E.00871
G1 X179.715 Y178.601 E.00619
G1 X175.816 Y182.5 E.18661
;PATH_TASK id=1281 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X184.143 Y177.555 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.338275
G1 F7200
G1 X184.088 Y177.494 E.002
;PATH_TASK id=1282 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.37864
G1 X184.034 Y177.434 E.00227
;PATH_TASK id=1283 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.419006
G1 X183.979 Y177.374 E.00255
;PATH_TASK id=1284 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.461606
G1 X183.925 Y177.313 E.00283
G1 X183.909 Y177.324 E.00065
;PATH_TASK id=1285 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.447825
G1 X183.868 Y177.363 E.00193
;PATH_TASK id=1286 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.403309
G2 X183.781 Y177.46 I.276 J.334 E.0039
;PATH_TASK id=1287 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.362327
G1 X183.632 Y177.638 E.00615
;PATH_TASK id=1288 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.326903
G1 X183.236 Y178.054 E.01358
G1 X182.921 Y178.335 E.00996
;PATH_TASK id=1289 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.371183
G1 X182.848 Y178.396 E.0026
;PATH_TASK id=1290 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.403436
G1 X182.554 Y178.62 E.01108
;PATH_TASK id=1291 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X181.601 Y178.709 F24000
;WIDTH:0.180279
G1 F7200
G1 X181.305 Y178.849 E.00374
;PATH_TASK id=1292 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X180.43 Y178.75 F24000
;WIDTH:0.0928314
G1 F7200
G1 X180.292 Y178.612 E.00081
;PATH_TASK id=1293 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X180.498 Y178.68 F24000
;WIDTH:0.0958465
G1 F7200
G2 X180.314 Y178.706 I.016 J.762 E.00082
;PATH_TASK id=1294 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X179.293 Y178.447 F24000
;WIDTH:0.449959
G1 F7200
G1 X175.857 Y181.883 E.16446
;PATH_TASK id=1295 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X179.611 Y178.417 F24000
;WIDTH:0.366658
G1 F7200
G1 X178.503 Y178.95 E.03311
;PATH_TASK id=1296 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X180.129 Y182.116 F24000
;WIDTH:0.147803
G1 F7200
G1 X179.736 Y182.347 E.00398
;PATH_TASK id=1297 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X180.131 Y182.12 F24000
;WIDTH:0.186826
G1 F7200
G1 X179.734 Y182.344 E.00546
;PATH_TASK id=1298 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X177.757 Y182.437 F24000
;WIDTH:0.240039
G1 F7200
G1 X177.611 Y182.389 E.00252
;PATH_TASK id=1299 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.25913
G1 X177.589 Y182.382 E.00042
;PATH_TASK id=1300 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.286535
G1 X177.566 Y182.375 E.00048
G1 X177.478 Y182.435 E.00216
;PATH_TASK id=1301 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.25376
G1 X177.419 Y182.476 E.00126
;PATH_TASK id=1302 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.227189
G1 X177.339 Y182.536 E.00153
;PATH_TASK id=1303 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.197555
G1 X177.255 Y182.599 E.00135
;PATH_TASK id=1304 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.182547
G1 X177.119 Y182.707 E.00202
;PATH_TASK id=1305 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X177.077 Y182.617 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.388684
G1 F12000
G1 X176.459 Y183.198 E.02437
G1 X176.13 Y183.599 E.01492
;PATH_TASK id=1306 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.421063
G1 F11900.273
G1 X176.063 Y183.671 E.00311
G1 X175.949 Y184.276 E.01934
;PATH_TASK id=1307 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.38292
G1 F12000
G1 X175.911 Y184.697 E.01195
;PATH_TASK id=1308 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.061 Y186.647 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X176.061 Y191.179 E.1534
G1 X178.728 Y188.511 E.1277
G1 X178.182 Y188.375 E.01905
G1 X177.54 Y188.116 E.02342
G1 X177.036 Y187.808 E.02001
G1 X176.612 Y187.436 E.0191
G1 X176.274 Y187.021 E.0181
G1 X176.08 Y186.682 E.01323
;PATH_TASK id=1309 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.468 Y187.853 F24000
G1 F11054.364
G1 X176.468 Y190.196 E.07929
G1 X177.944 Y188.72 E.07067
G1 X177.419 Y188.509 E.01917
G1 X176.853 Y188.176 E.0222
G1 X176.498 Y187.879 E.01566
;PATH_TASK id=1310 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.838 Y188.6 F24000
;WIDTH:0.377355
G1 F12000
G1 X176.838 Y189.301 E.01948
G1 X177.279 Y188.856 E.01742
G1 X176.873 Y188.621 E.01306
;PATH_TASK id=1311 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X177.689 Y187.944 F24000
M204 P1500
;TYPE:Bridge
;WIDTH:0.4
G1 F3000
G1 X181.512 Y188.105 E.11361
G1 X181.773 Y188.029 E.00808
G1 X181.973 Y187.956 E.00632
G1 X182.333 Y187.783 E.01186
G1 X177.366 Y187.572 E.14762
G1 X177.145 Y187.409 E.00815
G1 X176.911 Y187.196 E.0094
G1 X182.807 Y187.445 E.17521
G1 X183.008 Y187.252 E.00831
G1 X183.138 Y187.102 E.00588
G1 X176.602 Y186.825 E.19423
G1 X176.387 Y186.459 E.01262
G1 X183.383 Y186.755 E.2079
G1 X183.56 Y186.405 E.01164
G1 X176.243 Y186.095 E.21745
G1 X176.152 Y185.734 E.01106
G1 X183.681 Y186.053 E.22376
G1 X183.753 Y185.699 E.01074
G1 X176.109 Y185.375 E.22717
G1 X176.105 Y185.017 E.01062
G1 X183.785 Y185.343 E.22825
G1 X183.784 Y185.098 E.00725
G1 X183.776 Y184.985 E.00339
G1 X176.139 Y184.661 E.22694
G1 X176.221 Y184.307 E.01079
G1 X183.724 Y184.625 E.22296
G1 X183.62 Y184.263 E.01118
G1 X176.351 Y183.956 E.216
G1 X176.545 Y183.606 E.01186
G1 X183.457 Y183.899 E.2054
G1 X183.368 Y183.744 E.0053
G1 X183.221 Y183.532 E.00766
G1 X176.82 Y183.261 E.19023
G1 X177.036 Y183.056 E.00883
G1 X177.214 Y182.92 E.00667
G1 X182.876 Y183.16 E.16825
G1 X182.633 Y182.965 E.00924
G1 X182.334 Y182.779 E.01046
G1 X177.486 Y182.574 E.14406
;PATH_TASK id=1312 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X183.366 Y177.699 F24000
G1 F3000
G1 X183.849 Y176.434 E.04021
G1 X183.904 Y176.173 E.00791
G1 X183.946 Y175.781 E.01169
G1 X183.951 Y175.526 E.0076
G1 X183.931 Y175.224 E.00898
G1 X182.895 Y177.932 E.0861
G1 X182.668 Y178.099 E.00837
G1 X182.388 Y178.257 E.00955
G1 X183.795 Y174.581 E.11686
G1 X183.729 Y174.403 E.00566
G1 X183.592 Y174.113 E.00951
G1 X181.937 Y178.435 E.1374
G1 X181.522 Y178.521 E.01259
G1 X183.351 Y173.745 E.15184
G1 X183.082 Y173.447 E.01191
G1 X181.131 Y178.545 E.16207
G1 X180.93 Y178.54 E.00597
G1 X180.757 Y178.522 E.00515
G1 X182.794 Y173.201 E.16917
G1 X182.487 Y173.005 E.01082
G1 X180.4 Y178.455 E.17325
G1 X180.061 Y178.342 E.01061
G1 X182.162 Y172.854 E.17448
G1 X181.881 Y172.764 E.00877
G1 X181.82 Y172.749 E.00186
G1 X179.74 Y178.182 E.17276
G1 X179.692 Y178.157 E.00162
G1 X179.328 Y178.26 E.01123
G1 X181.461 Y172.688 E.17715
G1 X181.085 Y172.672 E.01118
G1 X178.928 Y178.305 E.17911
G1 X178.552 Y178.29 E.01119
G1 X180.689 Y172.706 E.17754
G1 X180.496 Y172.745 E.00586
G1 X180.267 Y172.811 E.00708
G1 X178.194 Y178.226 E.17216
G1 X177.854 Y178.114 E.01061
G1 X179.806 Y173.018 E.16203
G1 X179.464 Y172.91 E.01062
G1 X177.534 Y177.953 E.16034
G1 X177.232 Y177.741 E.01094
G1 X179.105 Y172.849 E.15554
G1 X178.912 Y172.837 E.00577
G1 X178.726 Y172.841 E.00551
G1 X176.952 Y177.474 E.14729
G1 X176.81 Y177.304 E.00658
G1 X176.697 Y177.142 E.00587
G1 X178.325 Y172.891 E.13514
G1 X178.088 Y172.953 E.00727
G1 X177.891 Y173.025 E.00622
G1 X176.476 Y176.72 E.11748
G1 X176.391 Y176.485 E.00742
G1 X176.312 Y176.15 E.01023
G1 X177.407 Y173.291 E.0909
G1 X177.101 Y173.54 E.01172
G1 X176.941 Y173.705 E.00681
G1 X176.799 Y173.88 E.0067
G1 X176.104 Y175.695 E.0577
;PATH_TASK id=1313 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X180.114 Y172.464 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.490394
G1 F10056.45
M106 S255
G1 X179.763 Y172.578 E.01372
;PATH_TASK id=1314 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.486902
G1 F10135.554
G1 X179.458 Y172.561 E.01127
;PATH_TASK id=1315 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.445309
G1 F11183.208
G1 X179.153 Y172.544 E.01021
;PATH_TASK id=1316 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.41345
G1 F12000
G3 X178.739 Y172.514 I.058 J-3.727 E.01282
;PATH_TASK id=1317 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X182.067 Y171.907 F24000
;WIDTH:0.606639
G1 F7982.701
G1 X181.815 Y171.883 E.01187
;PATH_TASK id=1318 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.570975
G1 F8521.843
G2 X181.413 Y171.853 I-.459 J3.428 E.01767
;PATH_TASK id=1319 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X183.459 Y172.637 F24000
;WIDTH:0.601651
G1 F8053.967
G1 X183.459 Y171.729 E.04219
G1 X182.916 Y171.877 E.02619
G3 X182.067 Y171.907 I-1.546 J-31.645 E.03947
G1 X182.669 Y172.141 E.03004
G1 X183.28 Y172.491 E.03271
G1 X183.428 Y172.612 E.00888
;PATH_TASK id=1320 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X183.939 Y173.986 F24000
;WIDTH:0.45109
G1 F11024.815
G1 X183.939 Y170.833 E.10702
G1 X183.652 Y171.1 E.01333
G1 X183.196 Y171.324 E.01722
G1 X182.723 Y171.422 E.0164
G1 X181.073 Y171.396 E.056
G1 X180.866 Y171.862 E.01731
G1 X180.536 Y172.206 E.01616
G1 X180.114 Y172.464 E.0168
G1 X180.671 Y172.334 E.01943
G1 X181.225 Y172.3 E.01884
G1 X181.482 Y172.306 E.00873
G1 X182.016 Y172.406 E.01842
G1 X182.599 Y172.632 E.02125
G1 X183.055 Y172.919 E.01827
G1 X183.452 Y173.277 E.01815
G1 X183.788 Y173.701 E.01836
G1 X183.921 Y173.95 E.00959
;PATH_TASK id=1321 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X183.527 Y177.597 F24000
;WIDTH:0.38292
G1 F12000
G1 X183.915 Y177.109 E.01763
G1 X183.959 Y177.068 E.00171
;PATH_TASK id=1322 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X182.42 Y178.586 F24000
G1 F12000
G1 X182.864 Y178.25 E.01574
G1 X182.452 Y178.562 E.01461
;PATH_TASK id=1323 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X179.688 Y178.395 F24000
G1 F12000
G1 X179.624 Y178.432 E.00208
G1 X179.689 Y178.466 E.00208
;PATH_TASK id=1324 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X178.766 Y178.687 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X178.197 Y178.619 E.01937
G1 X177.641 Y178.437 E.01984
G1 X177.133 Y178.145 E.01982
G1 X176.68 Y177.74 E.02057
G1 X176.284 Y177.196 E.02277
G1 X176.061 Y176.674 E.01921
G1 X176.061 Y181.392 E.15969
G1 X178.737 Y178.715 E.12814
;PATH_TASK id=1325 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X177.918 Y178.959 F24000
G1 F11054.364
G1 X177.397 Y178.771 E.01876
G1 X176.927 Y178.496 E.01841
G1 X176.468 Y178.097 E.0206
G1 X176.468 Y180.409 E.07826
G1 X177.89 Y178.987 E.06807
;PATH_TASK id=1326 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X177.257 Y179.105 F24000
;WIDTH:0.364175
G1 F12000
G1 X176.832 Y178.862 E.01308
G1 X176.832 Y179.53 E.01784
G1 X177.229 Y179.133 E.01499
;PATH_TASK id=1327 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X175.98 Y175.955 F24000
;WIDTH:0.38292
G1 F12000
G3 X176.017 Y174.802 I6.944 J-.356 E.03265
;PATH_TASK id=1328 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.024 Y174.731 F24000
;WIDTH:0.403682
G1 F12000
G1 X176.101 Y174.458 E.00851
;PATH_TASK id=1329 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.448439
G1 F11096.892
G1 X176.178 Y174.185 E.00957
G1 X176.499 Y173.646 E.02114
G1 X176.895 Y173.212 E.01983
G1 X177.421 Y172.831 E.02191
G1 X178.028 Y172.574 E.02222
;PATH_TASK id=1330 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.434494
G1 F11492.102
G1 X178.349 Y172.541 E.01048
;PATH_TASK id=1331 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.411685
G1 F12000
G1 X178.669 Y172.507 E.00987
G1 X178.309 Y172.475 E.01109
;PATH_TASK id=1332 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.450833
G1 F11031.778
G1 X177.949 Y172.295 E.01365
G1 X177.561 Y171.923 E.0182
G1 X177.278 Y171.438 E.01908
G1 X176.925 Y170.984 E.01948
G1 X176.625 Y170.754 E.01283
G1 X176.273 Y170.376 E.01752
G1 X176.067 Y169.956 E.01585
G1 X176.061 Y174.165 E.14273
;PATH_TASK id=1333 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.43456
G1 F11490.143
G1 X176.044 Y174.428 E.00859
;PATH_TASK id=1334 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.419121
G1 F11961.69
G1 X176.026 Y174.691 E.00825
;PATH_TASK id=1335 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.468 Y173.074 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X176.69 Y172.853 E.0106
G1 X177.185 Y172.499 E.0206
G1 X177.443 Y172.376 E.00968
G1 X177.18 Y172.08 E.01336
G1 X176.707 Y171.338 E.0298
G1 X176.468 Y171.149 E.01032
G1 X176.468 Y173.034 E.06381
;PATH_TASK id=1336 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.872 Y172.231 F24000
;WIDTH:0.399084
G1 F12000
G1 X176.805 Y172.27 E.00228
G1 X176.874 Y172.305 E.00229
;PATH_TASK id=1337 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.067 Y169.956 F24000
;WIDTH:0.44244
G1 F11263.516
G1 X176.045 Y169.696 E.00869
;PATH_TASK id=1338 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.395724
G1 F12000
G1 X176.023 Y169.435 E.00767
G1 X176.034 Y168.886 E.01611
;PATH_TASK id=1339 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.07 Y166.351 F24000
;WIDTH:0.495759
G1 F9937.312
G1 X176.085 Y166.854 E.01894
G1 X176.085 Y168.521 E.06278
G1 X176.187 Y168.247 E.011
G1 X176.453 Y167.868 E.01747
G1 X176.622 Y167.737 E.00804
G1 X176.375 Y167.363 E.01687
G1 X176.162 Y166.845 E.02106
G1 X176.077 Y166.39 E.01743
;PATH_TASK id=1340 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.069 Y166.342 F24000
;WIDTH:0.454123
G1 F10943.499
G1 X176.056 Y165.691 E.02228
;PATH_TASK id=1341 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.459389
G1 F10805.126
G1 X176.073 Y165.444 E.00857
;PATH_TASK id=1342 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.477282
G1 F10360.022
G1 X176.089 Y165.197 E.00894
;PATH_TASK id=1343 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.092 Y165.157 F24000
;WIDTH:0.497301
G1 F9903.588
G1 X176.187 Y164.904 E.0102
;PATH_TASK id=1344 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.450636
G1 F11037.105
G1 X176.281 Y164.651 E.00916
G1 X176.53 Y164.172 E.01828
G1 X176.86 Y163.747 E.01827
G1 X177.262 Y163.388 E.01826
G1 X177.805 Y163.056 E.02157
G1 X178.322 Y162.845 E.01892
G1 X178.519 Y162.787 E.00698
G1 X178.114 Y162.586 E.01533
G1 X177.749 Y162.24 E.01703
G2 X177.156 Y161.325 I-6.364 J3.479 E.03701
G1 X176.535 Y160.794 E.0277
G1 X176.265 Y160.329 E.01824
;PATH_TASK id=1345 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.4743
G1 F10431.644
G1 X176.187 Y160.092 E.00893
;PATH_TASK id=1346 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.505786
G1 F9722.052
G1 X176.109 Y159.856 E.00958
G1 X176.061 Y160.447 E.02283
;PATH_TASK id=1347 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.449999
G1 F11054.364
G1 X176.061 Y164.617 E.14114
;PATH_TASK id=1348 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.464188
G1 F10682.048
G1 X176.075 Y164.867 E.00877
;PATH_TASK id=1349 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.478376
G1 F10333.994
G1 X176.089 Y165.117 E.00907
;PATH_TASK id=1350 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.468 Y163.587 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X176.993 Y163.082 E.02465
G3 X177.632 Y162.689 I6.255 J9.448 E.0254
G1 X177.329 Y162.342 E.0156
G1 X176.88 Y161.639 E.02822
G1 X176.468 Y161.286 E.01838
G1 X176.468 Y163.547 E.07655
;PATH_TASK id=1351 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.961 Y162.515 F24000
;WIDTH:0.557816
G1 F8739.63
G1 X176.897 Y162.515 E.00276
G1 X176.864 Y162.571 E.00276
G1 X176.897 Y162.627 E.00276
G1 X176.961 Y162.627 E.00276
G1 X176.973 Y162.606 E.00104
;PATH_TASK id=1352 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X179.734 Y162.743 F24000
;WIDTH:0.38292
G1 F12000
G1 X179.054 Y162.775 E.01925
;PATH_TASK id=1353 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X181.768 Y162.215 F24000
;WIDTH:0.673566
G1 F7135.541
G1 X181.614 Y162.201 E.00809
;PATH_TASK id=1354 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X183.191 Y162.41 F24000
;WIDTH:0.358148
G1 F12000
G1 X183.132 Y162.445 E.00179
G1 X183.19 Y162.478 E.00177
;PATH_TASK id=1355 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X183.532 Y163.105 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X183.532 Y161.983 E.03795
G1 X183.015 Y162.108 E.01802
G1 X182.466 Y162.114 E.01858
;PATH_TASK id=1356 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.47203
G1 F10486.819
G1 X182.312 Y162.133 E.00551
;PATH_TASK id=1357 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.516093
G1 F9510.276
G1 X182.159 Y162.153 E.00608
;PATH_TASK id=1358 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.560155
G1 F8700.114
G1 X182.006 Y162.173 E.00665
;PATH_TASK id=1359 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.604217
G1 F8017.148
G1 X181.853 Y162.192 E.00721
;PATH_TASK id=1360 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.649907
G1 F7413.668
G1 X181.768 Y162.215 E.00442
;PATH_TASK id=1361 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.65121
G1 F7397.796
G1 X181.896 Y162.273 E.00712
;PATH_TASK id=1362 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.606496
G1 F7984.728
G1 X182.024 Y162.331 E.00659
;PATH_TASK id=1363 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.561783
G1 F8672.818
G1 X182.152 Y162.39 E.00607
;PATH_TASK id=1364 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.517069
G1 F9490.686
G1 X182.28 Y162.448 E.00555
;PATH_TASK id=1365 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.454564
G1 F10931.775
G2 X182.946 Y162.736 I6.612 J-14.372 E.02481
G1 X183.5 Y163.081 E.02236
;PATH_TASK id=1366 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X183.939 Y164.103 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X183.939 Y161.286 E.09538
G1 X183.817 Y161.391 E.00548
G1 X183.361 Y161.615 E.01718
G1 X182.888 Y161.713 E.01636
G1 X181.239 Y161.688 E.05585
G1 X181.031 Y162.154 E.01726
G1 X180.701 Y162.497 E.01611
G1 X180.53 Y162.596 E.00671
G3 X182.325 Y162.907 I-.137 J6.122 E.06191
G1 X182.81 Y163.123 E.01795
G1 X183.265 Y163.411 E.01825
G1 X183.676 Y163.776 E.01861
G1 X183.914 Y164.072 E.01286
;PATH_TASK id=1367 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X183.915 Y167.833 F24000
;WIDTH:0.564496
G1 F8627.698
G1 X183.85 Y167.833 E.00283
G1 X183.817 Y167.889 E.00283
G1 X183.85 Y167.946 E.00283
G1 X183.915 Y167.946 E.00283
G1 X183.927 Y167.924 E.00109
;PATH_TASK id=1368 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 E-.73039 F2100
;WIPE_START
G1 F8627.698
G1 X183.915 Y167.946 E-.00613
G1 X183.85 Y167.946 E-.01587
G1 X183.817 Y167.889 E-.01587
G1 X183.85 Y167.833 E-.01587
G1 X183.915 Y167.833 E-.01587
;WIPE_END
G1 X176.109 Y159.856 F24000
G1 E.8 F1800
;WIDTH:0.547209
G1 F8923.455
G3 X176.11 Y159.283 I5.187 J-.279 E.02404
;PATH_TASK id=1369 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.149 Y156.614 F24000
;WIDTH:0.610212
G1 F7932.427
G1 X176.132 Y156.865 E.0119
;PATH_TASK id=1370 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.55894
G1 F8720.591
G1 X176.115 Y157.117 E.01082
G3 X176.112 Y159.243 I-179.463 J.841 E.09121
G1 X176.228 Y158.742 E.02204
G1 X176.467 Y158.295 E.02177
G1 X176.703 Y158.06 E.01429
G1 X176.489 Y157.697 E.01807
G1 X176.274 Y157.103 E.02711
;PATH_TASK id=1371 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.575696
G1 F8446.339
G1 X176.216 Y156.878 E.01029
;PATH_TASK id=1372 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.592834
G1 F8183.105
G1 X176.159 Y156.652 E.01062
;PATH_TASK id=1373 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.149 Y156.612 F24000
;WIDTH:0.617142
G1 F7836.69
G1 X176.139 Y155.953 E.03146
;PATH_TASK id=1374 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.622406
G1 F7765.509
G1 X176.153 Y155.704 E.01202
;PATH_TASK id=1375 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.637957
G1 F7562.555
G1 X176.168 Y155.455 E.01234
;PATH_TASK id=1376 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.17 Y155.415 F24000
;WIDTH:0.647154
G1 F7447.448
G1 X176.228 Y155.293 E.00678
;PATH_TASK id=1377 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.603342
G1 F8029.668
G1 X176.286 Y155.171 E.00629
;PATH_TASK id=1378 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.55953
G1 F8710.642
G1 X176.344 Y155.049 E.0058
;PATH_TASK id=1379 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.515718
G1 F9517.82
G1 X176.402 Y154.927 E.00531
;PATH_TASK id=1380 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.451831
G1 F11004.848
G3 X176.703 Y154.324 I12.21 J5.726 E.02293
G1 X177.089 Y153.829 E.02135
G1 X177.497 Y153.473 E.0184
G1 X178.005 Y153.175 E.02002
G1 X178.512 Y152.99 E.01836
;PATH_TASK id=1381 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.442818
G1 F11252.885
G1 X179.047 Y152.924 E.01791
G1 X179.598 Y152.932 E.01834
G1 X180.22 Y153.049 E.02103
G1 X180.74 Y153.263 E.01872
G1 X181.12 Y153.499 E.01487
G1 X181.365 Y153.27 E.01115
G1 X181.821 Y153.046 E.01687
G1 X182.293 Y152.953 E.01602
G1 X182.98 Y152.96 E.02285
;PATH_TASK id=1382 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.467962
G1 F10587.188
G1 X183.384 Y153.01 E.01438
;PATH_TASK id=1383 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.521446
G1 F9403.891
G1 X183.856 Y153.2 E.02024
G1 X183.9 Y153.229 E.00208
G1 X183.9 Y152.6 E.02502
;PATH_TASK id=1384 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.515877
G1 F9514.607
G1 X183.632 Y152.587 E.01054
;PATH_TASK id=1385 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.488231
G1 F10105.296
G1 X183.364 Y152.573 E.00992
;PATH_TASK id=1386 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.449214
G1 F11075.744
G2 X180.272 Y152.561 I-2.05 J127.558 E.10448
G1 X179.603 Y152.549 E.02261
;PATH_TASK id=1387 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.447265
G1 F11129.108
G2 X178.508 Y152.566 I-.335 J13.262 E.03681
G2 X176.061 Y152.561 I-1.558 J147.429 E.08229
G1 X176.061 Y154.748 E.07354
;PATH_TASK id=1388 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.473739
G1 F10445.224
G1 X176.084 Y154.901 E.00557
;PATH_TASK id=1389 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.521219
G1 F9408.347
G1 X176.108 Y155.055 E.00618
;PATH_TASK id=1390 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.568699
G1 F8558.74
G1 X176.132 Y155.209 E.00679
;PATH_TASK id=1391 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.616178
G1 F7849.867
G1 X176.156 Y155.362 E.00741
;PATH_TASK id=1392 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
;WIDTH:0.639918
G1 F7537.714
G1 X176.16 Y155.376 E.00074
;PATH_TASK id=1393 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.5 Y153.866 F24000
;WIDTH:0.514913
G1 F9534.039
G1 X176.829 Y153.467 E.02029
G1 X177.21 Y153.14 E.01971
G1 X177.429 Y153 E.01018
G1 X176.5 Y153 E.03645
G1 X176.5 Y153.826 E.0324
;PATH_TASK id=1394 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X181.09 Y152.929 F24000
;WIDTH:0.463996
G1 F10686.907
G2 X181.097 Y153.009 I-.024 J.042 E.00744
;PATH_TASK id=1395 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 E-.75615 F2100
;WIPE_START
G1 F10686.907
G1 X181.09 Y153.02 E-.00248
G1 X181.038 Y153.02 E-.01034
G1 X181.012 Y152.975 E-.01034
G1 X181.038 Y152.929 E-.01034
G1 X181.09 Y152.929 E-.01034
;WIPE_END
G1 X180.557 Y162.331 F24000
G1 E.8 F1800
M204 P1500
;TYPE:Bridge
;WIDTH:0.4
G1 F3000
G1 X178.36 Y162.294 E.06523
G1 X178.17 Y162.138 E.00731
G1 X177.991 Y161.931 E.00813
G1 X180.692 Y161.977 E.08021
G1 X180.787 Y161.818 E.00549
G1 X180.86 Y161.622 E.0062
G1 X177.795 Y161.57 E.09102
G2 X177.562 Y161.209 I-5.189 J3.099 E.01277
G1 X183.077 Y161.303 E.16378
G1 X183.208 Y161.266 E.00405
G1 X183.491 Y161.146 E.00911
G1 X183.644 Y161.049 E.0054
G1 X183.751 Y160.957 E.00416
G1 X177.161 Y160.845 E.19568
G1 X176.979 Y160.706 E.0068
G1 X176.772 Y160.481 E.00906
G1 X183.984 Y160.604 E.21417
G1 X184.025 Y160.509 E.00307
G1 X184.025 Y160.248 E.00777
G1 X176.598 Y160.121 E.22055
G1 X176.551 Y159.923 E.00606
G1 X176.534 Y159.763 E.00477
G1 X184.025 Y159.891 E.22247
G1 X184.025 Y159.533 E.0106
G1 X176.538 Y159.406 E.22233
G1 X176.549 Y159.209 E.00587
G1 X176.582 Y159.05 E.00482
G1 X184.025 Y159.176 E.22105
G1 X184.025 Y158.936 E.00713
G1 X183.977 Y158.818 E.00378
G1 X176.726 Y158.695 E.21531
G1 X176.858 Y158.497 E.00705
G1 X177.017 Y158.343 E.00659
G1 X184.025 Y158.462 E.20811
G1 X184.025 Y158.105 E.0106
G1 X177.169 Y157.988 E.20362
G1 X176.941 Y157.627 E.01267
G1 X184.025 Y157.748 E.21038
G1 X184.025 Y157.391 E.0106
G1 X176.78 Y157.267 E.21515
G1 X176.675 Y156.908 E.0111
G1 X184.025 Y157.034 E.21827
G1 X184.025 Y156.676 E.0106
G1 X176.615 Y156.55 E.22004
G1 X176.595 Y156.193 E.01063
G1 X184.025 Y156.319 E.22066
G1 X184.025 Y155.962 E.0106
G1 X176.609 Y155.836 E.22025
G1 X176.658 Y155.48 E.01068
G1 X184.025 Y155.605 E.21879
G1 X184.025 Y155.248 E.0106
G1 X176.749 Y155.124 E.21608
G1 X176.893 Y154.769 E.01136
G1 X184.025 Y154.891 E.21181
G1 X184.025 Y154.534 E.0106
G1 X177.099 Y154.416 E.20568
G1 X177.236 Y154.236 E.00671
G1 X177.392 Y154.064 E.00691
G1 X184.025 Y154.176 E.19698
G1 X184.025 Y153.959 E.00646
G1 X183.933 Y153.818 E.00501
G1 X181.37 Y153.774 E.07612
G1 X181.181 Y153.996 E.00865
G1 X180.841 Y153.765 E.01219
G1 X177.819 Y153.714 E.08976
G1 X178.022 Y153.591 E.00707
G1 X178.213 Y153.499 E.00629
G1 X178.407 Y153.424 E.00616
G1 X178.588 Y153.37 E.00563
G1 X180.522 Y153.403 E.05743
;PATH_TASK id=1396 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X181.539 Y153.42 F24000
G1 F3000
G1 X183.776 Y153.458 E.06644
;PATH_TASK id=1397 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F3000
G1 X182.776 Y153.441 E-.16
;WIPE_END
G1 X180.472 Y171.973 F24000
M73 P82 R6
G1 E.8 F1800
G1 F3000
G1 X178.1 Y171.932 E.07045
G1 X177.883 Y171.713 E.00914
G1 X177.779 Y171.57 E.00527
G1 X180.573 Y171.617 E.08296
G1 X180.638 Y171.488 E.00428
G1 X180.713 Y171.262 E.00707
G1 X177.591 Y171.209 E.09271
G2 X177.339 Y170.848 I-2.901 J1.752 E.01309
G1 X183.114 Y170.946 E.17151
G1 X183.28 Y170.879 E.00531
G1 X183.452 Y170.776 E.00594
G1 X183.552 Y170.698 E.00377
G1 X183.646 Y170.598 E.00408
G1 X176.896 Y170.483 E.20045
G1 X176.688 Y170.289 E.00843
G1 X176.558 Y170.12 E.00634
G1 X183.849 Y170.244 E.21651
G1 X183.916 Y170.072 E.00551
G1 X183.956 Y169.889 E.00555
G1 X176.415 Y169.761 E.22393
G1 X176.381 Y169.603 E.0048
G1 X176.368 Y169.403 E.00595
G1 X183.97 Y169.532 E.22573
G1 X183.976 Y169.175 E.0106
G1 X176.374 Y169.046 E.22573
G1 X176.389 Y168.885 E.0048
G1 X176.437 Y168.69 E.00596
G1 X183.925 Y168.817 E.22236
G1 X183.831 Y168.57 E.00784
G1 X183.774 Y168.457 E.00376
G1 X176.601 Y168.335 E.21301
G1 X176.755 Y168.136 E.00749
G1 X176.952 Y167.984 E.00739
G1 X183.445 Y168.095 E.1928
G1 X183.266 Y167.95 E.00685
G1 X183.449 Y167.738 E.00833
G1 X177.036 Y167.629 E.19045
G1 X176.889 Y167.432 E.00728
G1 X176.785 Y167.267 E.00579
G1 X183.712 Y167.385 E.20569
G1 X183.809 Y167.217 E.00575
G1 X183.895 Y167.031 E.0061
G1 X176.614 Y166.907 E.21621
G1 X176.503 Y166.548 E.01116
G1 X184.018 Y166.676 E.22318
G1 X184.025 Y166.319 E.0106
G1 X176.444 Y166.19 E.22512
G1 X176.429 Y165.833 E.01062
G1 X184.025 Y165.962 E.22557
G1 X184.025 Y165.605 E.0106
G1 X176.456 Y165.476 E.22479
G1 X176.526 Y165.12 E.01077
G1 X184.025 Y165.248 E.22271
G2 X184.018 Y165.138 I-.252 J-.039 E.0033
G1 X183.938 Y164.889 E.00776
G1 X176.647 Y164.765 E.21651
G1 X176.746 Y164.558 E.00682
G1 X176.832 Y164.411 E.00505
G1 X183.765 Y164.529 E.20588
G1 X183.672 Y164.377 E.00528
G1 X183.514 Y164.167 E.00779
G1 X177.093 Y164.058 E.19068
G1 X177.283 Y163.864 E.00807
G1 X177.47 Y163.707 E.00724
G1 X183.148 Y163.804 E.1686
G1 X182.83 Y163.575 E.01164
G1 X182.588 Y163.437 E.00827
G1 X178.055 Y163.36 E.13461
G1 X178.369 Y163.232 E.01006
G1 X178.613 Y163.154 E.00761
G1 X178.969 Y163.067 E.01087
G1 X179.244 Y163.023 E.00827
G1 X182.125 Y163.072 E.08557
;PATH_TASK id=1398 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F3000
G1 X181.125 Y163.055 E-.16
;WIPE_END
G1 X176.066 Y192.886 F24000
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.415142
G1 F12000
M106 S255
G1 X175.997 Y192.926 E.00249
G1 X176.07 Y192.96 E.0025
;PATH_TASK id=1399 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.899 Y197.369 F24000
;WIDTH:0.497957
G1 F9889.305
G1 X176.899 Y198.366 E.03772
G1 X177.475 Y197.79 E.03084
G1 X176.931 Y197.393 E.02549
;PATH_TASK id=1400 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.468 Y196.521 F24000
;WIDTH:0.449999
G1 F11054.364
G1 X176.468 Y199.407 E.09769
G1 X178.136 Y197.739 E.07986
G1 X176.5 Y196.545 E.06856
;PATH_TASK id=1401 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.061 Y195.667 F24000
G1 F11054.364
G1 X176.061 Y200.39 E.15987
G1 X178.76 Y197.69 E.12922
G1 X176.231 Y195.841 E.10607
G1 X176.089 Y195.695 E.00688
;PATH_TASK id=1402 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X176.053 Y206.739 F24000
;WIDTH:0.435009
G1 F11476.985
G1 X176.053 Y207.447 E.02308
G1 X176.824 Y207.447 E.02514
G1 X176.373 Y207.099 E.01858
G1 X176.08 Y206.769 E.0144
;PATH_TASK id=1403 conformal=0 surface=-1 source_layer=3 shell_offset=-1.000000
G1 X179.896 Y207.281 F24000
;WIDTH:0.63851
G1 F7555.533
G1 X179.822 Y207.281 E.00369
G1 X179.784 Y207.345 E.00369
G1 X179.822 Y207.41 E.00369
G1 X179.896 Y207.41 E.00369
G1 X179.913 Y207.38 E.00171
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:1
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;1
G1 E-.70766 F2100
;WIPE_START
G1 F7555.533
G1 X179.896 Y207.41 E-.00957
G1 X179.822 Y207.41 E-.02069
G1 X179.784 Y207.345 E-.02069
G1 X179.822 Y207.281 E-.02069
G1 X179.896 Y207.281 E-.02069
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;1
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=1404 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
M486 S0
G1 X184.346 Y207.846 Z1 F24000
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F6717
G1 X175.654 Y207.846 E.29424
G1 X175.654 Y152.154 E1.88514
G1 X184.346 Y152.154 E.29424
M73 P83 R6
G1 X184.346 Y207.806 E1.88378
;PATH_TASK id=1405 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
M204 T2500
G1 X184.389 Y207.806 F24000
G1 X184.389 Y207.889
G1 X184.775 Y208.275
M204 P2500
;TYPE:Outer wall
G1 F6717
G1 X175.225 Y208.275 E.32326
G1 X175.225 Y151.725 E1.91415
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y208.235 E1.91279
;PATH_TASK id=1406 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X183.775 Y208.239 E-.16
;WIPE_END
G1 X183.775 Y207.889 F24000
G1 X175.611 Y207.889
G1 X175.611 Y207.379
G1 X176.101 Y207.379
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.477224
G1 F6717
G2 X176.109 Y207.46 I-.026 J.043 E.00796
;PATH_TASK id=1407 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X178.921 Y197.646 F24000
;TYPE:Sparse infill
;WIDTH:0.45
G1 F6717
G1 X176.921 Y197.646 E.0677
G1 X176 Y196.725 E.04413
G1 X176 Y192.58 E.1403
G1 X176.595 Y193.175 E.02849
G3 X177.235 Y192.932 I.811 J1.17 E.02342
G1 X179.545 Y192.971 E.07819
G3 X179.997 Y192.432 I.872 J.271 E.02444
G1 X176 Y188.435 E.19133
G1 X176 Y184.29 E.1403
G1 X176.361 Y184.625 E.01669
G3 X178.176 Y182.733 I2.353 J.442 E.09389
G1 X178.514 Y182.659 E.01173
G1 X176 Y180.145 E.12038
G1 X176 Y176 E.1403
G1 X176.712 Y176.712 E.03408
G2 X177.899 Y177.899 I2.086 J-.899 E.0582
G1 X184 Y184 E.29209
G1 X184 Y179.855 E.1403
G1 X182.272 Y178.082 E.08381
G2 X183.735 Y175.445 I-1.214 J-2.398 E.10838
G1 X184 Y175.71 E.01269
G1 X184 Y177.71 E.0677
;PATH_TASK id=1408 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X183.469 Y175.061 F24000
;TYPE:Internal solid infill
;WIDTH:0.449999
G1 F6717
G1 X181.789 Y173.381 E.08043
G1 X181.406 Y173.301 E.01324
G1 X181.118 Y173.285 E.00978
G1 X183.325 Y175.493 E.10568
G1 X183.324 Y175.518 E.00084
G3 X183.302 Y175.942 I-1.069 J.157 E.01449
G1 X183.297 Y176.04 E.00331
G1 X180.611 Y173.355 E.12854
G1 X180.412 Y173.415 E.00704
G1 X180.202 Y173.521 E.00797
G1 X183.18 Y176.499 E.14254
G1 X183.091 Y176.719 E.00804
G2 X182.994 Y176.889 I2.942 J1.788 E.00663
G1 X179.783 Y173.678 E.15374
G1 X179.712 Y173.679 E.00238
G2 X179.488 Y173.56 I-.468 J.613 E.00863
G1 X178.989 Y173.46 E.01722
G1 X182.748 Y177.218 E.17992
G1 X182.673 Y177.303 E.00381
G1 X182.449 Y177.496 E.01
G1 X178.458 Y173.505 E.19104
G1 X178.376 Y173.515 E.0028
G2 X178.028 Y173.65 I.153 J.906 E.01272
G1 X182.094 Y177.716 E.19462
G1 X181.932 Y177.786 E.00599
G1 X181.666 Y177.864 E.00936
G1 X177.67 Y173.868 E.19128
G1 X177.584 Y173.936 E.00373
G1 X177.379 Y174.152 E.01008
G1 X181.15 Y177.924 E.18056
G1 X180.943 Y177.925 E.00702
G1 X180.497 Y177.846 E.01533
G1 X177.148 Y174.497 E.16034
G1 X177.035 Y174.725 E.00861
G1 X176.977 Y174.901 E.00629
G1 X179.598 Y177.522 E.12547
G1 X179.51 Y177.559 E.00322
G3 X179.162 Y177.662 I-.53 J-1.143 E.01233
G1 X176.889 Y175.389 E.1088
G1 X176.879 Y175.508 E.00403
G1 X176.914 Y175.99 E.01638
G1 X178.791 Y177.867 E.08982
;PATH_TASK id=1409 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X181.588 Y178.074 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.0944988
G1 F6717
G3 X181.327 Y178.032 I.017 J-.944 E.00114
;PATH_TASK id=1410 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X180.306 Y177.971 F24000
;WIDTH:0.110253
G1 F6717
G1 X180.215 Y177.908 E.00062
;PATH_TASK id=1411 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.147408
G1 X180.123 Y177.845 E.00097
;PATH_TASK id=1412 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.184563
G1 X180.032 Y177.782 E.00131
;PATH_TASK id=1413 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.224795
G3 X179.881 Y177.658 I1.327 J-1.765 E.00296
;PATH_TASK id=1414 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.224495
G1 X179.863 Y177.665 E.00029
;PATH_TASK id=1415 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.192073
G1 X179.846 Y177.673 E.00024
;PATH_TASK id=1416 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.158014
G1 X179.823 Y177.679 E.00023
;PATH_TASK id=1417 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.11275
G1 X179.785 Y177.686 E.00022
;PATH_TASK id=1418 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.0917827
G1 X179.765 Y177.708 E.00012
;PATH_TASK id=1419 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X178.435 Y177.842 F24000
;WIDTH:0.25127
G1 F6717
G1 X178.162 Y177.675 E.00554
;PATH_TASK id=1420 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.275769
G1 X178.066 Y177.61 E.00224
;PATH_TASK id=1421 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.319669
G1 X177.971 Y177.546 E.00266
;PATH_TASK id=1422 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.349656
G1 X177.929 Y177.515 E.00132
;PATH_TASK id=1423 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.375575
G1 X177.793 Y177.405 E.00484
;PATH_TASK id=1424 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.418048
G3 X177.621 Y177.265 I1.238 J-1.696 E.00691
;PATH_TASK id=1425 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.437212
G3 X177.216 Y176.842 I3.521 J-3.773 E.01922
;PATH_TASK id=1426 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.389442
G1 X177.103 Y176.696 E.00532
;PATH_TASK id=1427 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.366428
G1 X176.75 Y176.213 E.01609
;PATH_TASK id=1428 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X176.989 Y170.299 F24000
M204 P4000
;TYPE:Sparse infill
;WIDTH:0.45
G1 F6717
G3 X176.747 Y168.457 I1.088 J-1.08 E.06757
G1 X176 Y167.71 E.03576
G1 X176 Y171.855 E.1403
G1 X177.577 Y173.432 E.07549
G3 X179.313 Y173.108 I1.242 J1.843 E.06149
G3 X179.786 Y173.245 I-.202 J1.584 E.01672
G3 X181.151 Y172.877 I1.385 J2.42 E.0484
G1 X180.124 Y171.834 E.04953
G2 X180.517 Y170.799 I-.499 J-.781 E.04017
G1 X182.716 Y170.836 E.07446
G2 X183.164 Y170.729 I-.259 J-2.077 E.01563
G1 X184 Y171.565 E.04003
G1 X184 Y167.42 E.1403
G1 X183.645 Y167.065 E.01702
G2 X183.792 Y165.127 I-2.525 J-1.167 E.06719
G1 X183.79 Y165.118 E.0003
;PATH_TASK id=1429 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X183.678 Y165.731 F24000
;TYPE:Internal solid infill
;WIDTH:0.45
G1 F6717
G1 X181.705 Y163.758 E.09448
G1 X181.421 Y163.69 E.00988
G1 X181.002 Y163.63 E.01433
G1 X183.478 Y166.106 E.11854
G1 X183.464 Y166.34 E.00793
G3 X183.395 Y166.599 I-4.071 J-.941 E.00907
G1 X180.388 Y163.592 E.14395
G1 X180.27 Y163.585 E.00402
G1 X179.817 Y163.597 E.01533
G1 X183.22 Y167 E.1629
G1 X183.092 Y167.197 E.00796
G1 X182.979 Y167.334 E.00602
G1 X179.292 Y163.648 E.17646
G1 X178.998 Y163.691 E.01007
G1 X178.811 Y163.742 E.00657
G1 X182.678 Y167.609 E.18512
G1 X182.526 Y167.703 E.00606
G3 X182.328 Y167.834 I-1.068 J-1.401 E.00805
G1 X178.385 Y163.892 E.18874
G1 X178.254 Y163.945 E.00477
G1 X178.014 Y164.097 E.00961
G1 X183.358 Y169.441 E.25581
G1 X183.352 Y169.798 E.01211
G1 X183.343 Y169.888 E.00303
G1 X183.309 Y169.967 E.00294
G1 X177.684 Y164.343 E.26926
G1 X177.623 Y164.399 E.00283
G1 X177.422 Y164.656 E.01103
G1 X183.061 Y170.295 E.26995
G3 X182.95 Y170.379 I-.236 J-.197 E.00476
G1 X182.703 Y170.429 E.00851
G1 X182.618 Y170.427 E.0029
G1 X177.214 Y165.024 E.25866
G1 X177.136 Y165.229 E.00744
G1 X177.085 Y165.47 E.00834
G1 X182.032 Y170.418 E.23682
G1 X181.447 Y170.408 E.01983
G1 X176.864 Y165.825 E.21938
;PATH_TASK id=1430 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X177.264 Y164.805 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.144293
G1 F6717
G1 X177.172 Y164.767 E.00084
G1 X177.19 Y164.638 E.0011
;PATH_TASK id=1431 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X181.068 Y170.605 F24000
;WIDTH:0.449955
G1 F6717
G1 X176.898 Y166.435 E.19958
;PATH_TASK id=1432 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X177.327 Y167.071 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.38292
G1 F6717
G1 X177.617 Y167.392 E.01225
G1 X178.115 Y167.825 E.01866
;PATH_TASK id=1433 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X179.267 Y170.752 F24000
;WIDTH:0.507953
G1 F6717
G1 X179.293 Y170.463 E.01123
G1 X179.348 Y170.365 E.00435
;PATH_TASK id=1434 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.491854
G1 X179.086 Y170.08 E.01443
;PATH_TASK id=1435 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.439412
G2 X178.166 Y169.134 I-16.495 J15.109 E.04352
G1 X178.099 Y169.183 E.00277
G1 X177.795 Y169.188 E.01
G1 X177.819 Y169.399 E.00702
G1 X178.172 Y169.683 E.01494
G1 X178.534 Y170.072 E.01753
;PATH_TASK id=1436 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.459655
G1 X178.7 Y170.301 E.00979
;PATH_TASK id=1437 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.496089
G3 X178.992 Y170.745 I-2.186 J1.757 E.02005
G1 X179.227 Y170.751 E.00884
;PATH_TASK id=1438 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X179.478 Y171.194 F24000
;WIDTH:0.449999
G1 F6717
G1 X179.7 Y171.116 E.00796
G1 X179.718 Y170.559 E.01888
G1 X179.876 Y170.276 E.01095
G1 X178.236 Y168.637 E.0785
G1 X178.053 Y168.785 E.00798
G1 X177.55 Y168.801 E.01705
G1 X177.45 Y168.892 E.00456
G1 X177.396 Y169.117 E.00785
G1 X177.405 Y169.461 E.01163
G1 X177.431 Y169.567 E.00372
G2 X177.878 Y169.95 I2.632 J-2.623 E.01993
G1 X178.235 Y170.343 E.01799
G2 X178.726 Y171.122 I12.694 J-7.447 E.03116
G1 X178.923 Y171.179 E.00696
G1 X179.438 Y171.193 E.01743
;PATH_TASK id=1439 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X179.512 Y171.603 F24000
G1 F6717
G1 X179.796 Y171.547 E.00981
G1 X180.008 Y171.397 E.00879
G1 X180.106 Y171.234 E.00641
G1 X180.115 Y170.648 E.01983
G1 X180.274 Y170.448 E.00865
G3 X180.568 Y170.393 I.213 J.325 E.01041
G1 X178.368 Y168.193 E.1053
;PATH_TASK id=1440 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.43323
G1 X178.257 Y168.022 E.00662
;PATH_TASK id=1441 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.398024
G1 X178.145 Y167.851 E.00602
G1 X178.205 Y167.982 E.00423
;PATH_TASK id=1442 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.448154
G1 X178.178 Y168.239 E.00873
G1 X177.982 Y168.382 E.00818
G1 X177.458 Y168.404 E.01766
G1 X177.266 Y168.489 E.00708
G1 X177.086 Y168.688 E.00904
G1 X176.989 Y169.108 E.01452
G1 X177.01 Y169.559 E.01521
G1 X177.059 Y169.76 E.00698
G1 X177.38 Y170.079 E.01525
G1 X177.577 Y170.223 E.00822
G1 X177.959 Y170.651 E.01931
G1 X178.375 Y171.359 E.02771
G2 X178.781 Y171.582 I.664 J-.728 E.01574
G1 X179.472 Y171.601 E.0233
;PATH_TASK id=1443 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X182.385 Y173.681 F24000
;WIDTH:0.461984
G1 F6717
G1 X182.717 Y173.992 E.01584
;PATH_TASK id=1444 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X183.024 Y168.669 F24000
;WIDTH:0.661762
G1 F6717
G1 X183.167 Y168.823 E.01087
;PATH_TASK id=1445 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X182.365 Y164.069 F24000
;WIDTH:0.559237
G1 F6717
G1 X182.579 Y164.251 E.01208
;PATH_TASK id=1446 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.605603
G3 X183.019 Y164.672 I-1.737 J2.254 E.02853
;PATH_TASK id=1447 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X184 Y161.275 F24000
;TYPE:Sparse infill
;WIDTH:0.45
G1 F6717
G1 X184 Y163.275 E.0677
G1 X181.835 Y161.11 E.10366
G2 X183.224 Y161.067 I.581 J-3.669 E.04731
G2 X183.708 Y160.711 I-1.05 J-1.935 E.0204
;PATH_TASK id=1448 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X184.184 Y156.933 F24000
;TYPE:Internal solid infill
;WIDTH:0.45
G1 F6717
G1 X181.704 Y154.453 E.11871
G1 X181.603 Y154.768 E.01117
G1 X181.478 Y154.803 E.00441
G1 X183.75 Y157.075 E.10876
G1 X183.583 Y157.399 E.01235
G1 X183.565 Y157.466 E.00234
G1 X180.23 Y154.131 E.15964
G1 X180.166 Y154.095 E.00249
G1 X179.943 Y154.009 E.00808
G1 X179.557 Y153.921 E.01342
G1 X179.43 Y153.906 E.00434
G1 X183.544 Y158.02 E.19694
G1 X183.541 Y158.081 E.00204
G1 X183.405 Y158.382 E.0112
G1 X183.367 Y158.419 E.00179
G1 X178.904 Y153.956 E.21362
G1 X178.753 Y153.972 E.00514
G1 X178.498 Y154.052 E.00906
G1 X178.449 Y154.077 E.00185
G1 X183.4 Y159.028 E.23699
G1 X183.528 Y159.412 E.01369
G1 X183.523 Y159.727 E.01067
G1 X178.083 Y154.287 E.26041
G1 X177.974 Y154.369 E.00464
G1 X177.784 Y154.563 E.00919
G1 X183.475 Y160.255 E.27244
G1 X183.38 Y160.469 E.00795
G1 X183.229 Y160.584 E.00642
G1 X177.535 Y154.89 E.27253
G1 X177.351 Y155.282 E.01465
G1 X182.788 Y160.719 E.26026
G1 X182.203 Y160.709 E.01983
G1 X177.25 Y155.756 E.23711
G1 X177.21 Y156.046 E.00993
G1 X177.228 Y156.31 E.00896
G1 X181.803 Y160.885 E.219
;PATH_TASK id=1449 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X181.239 Y160.896 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.449956
G1 F6717
G1 X177.054 Y156.711 E.20031
;PATH_TASK id=1450 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X183.606 Y159.913 F24000
;WIDTH:0.133059
G1 F6717
G3 X183.69 Y160.151 I-.78 J.407 E.00189
G1 X183.691 Y160.187 E.00027
;PATH_TASK id=1451 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X181.305 Y154.66 F24000
;WIDTH:0.118961
G1 F6717
G1 X181.262 Y154.683 E.00031
;PATH_TASK id=1452 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.164283
G1 X181.218 Y154.706 E.00049
;PATH_TASK id=1453 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.17777
G1 X181.209 Y154.708 E.00011
G1 X180.68 Y154.216 E.00811
;PATH_TASK id=1454 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.133217
G2 X180.563 Y154.126 I-.981 J1.156 E.0011
;PATH_TASK id=1455 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.113355
G1 X180.48 Y154.063 E.00061
;PATH_TASK id=1456 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X178.235 Y154.132 F24000
;WIDTH:0.138997
G1 F6717
G1 X178.196 Y154.041 E.00079
G1 X178.075 Y154.055 E.00097
;PATH_TASK id=1457 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X177.168 Y155.568 F24000
;WIDTH:0.116163
G1 F6717
G1 X177.136 Y155.393 E.00109
G1 X177.138 Y155.339 E.00033
;PATH_TASK id=1458 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X177.523 Y157.439 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.422357
G1 F6717
G1 X177.673 Y157.609 E.00715
;PATH_TASK id=1459 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.454503
G2 X178.137 Y158.061 I2.202 J-1.795 E.02221
;PATH_TASK id=1460 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X179.43 Y161.044 F24000
;WIDTH:0.509837
G1 F6717
G1 X179.457 Y160.751 E.01142
G1 X179.513 Y160.652 E.0044
;PATH_TASK id=1461 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.493725
G1 X179.252 Y160.369 E.01443
;PATH_TASK id=1462 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.442412
G2 X178.285 Y159.378 I-15.871 J14.518 E.046
G1 X178.214 Y159.446 E.00328
G1 X177.963 Y159.48 E.0084
G1 X177.986 Y159.688 E.00697
G1 X178.338 Y159.973 E.01505
G1 X178.7 Y160.363 E.01766
;PATH_TASK id=1463 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.461501
G1 X178.864 Y160.59 E.00974
;PATH_TASK id=1464 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.498101
G3 X179.157 Y161.037 I-2.149 J1.724 E.02026
G1 X179.39 Y161.043 E.00883
;PATH_TASK id=1465 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X179.679 Y161.481 F24000
;WIDTH:0.449999
G1 F6717
G1 X179.861 Y161.41 E.0066
G1 X179.883 Y160.848 E.01904
G1 X180.043 Y160.564 E.01102
G1 X178.328 Y158.849 E.08209
G1 X178.112 Y159.055 E.01009
G1 X177.674 Y159.131 E.01506
G1 X177.586 Y159.268 E.0055
G1 X177.554 Y159.69 E.01432
G1 X177.596 Y159.859 E.00589
G1 X177.916 Y160.133 E.01426
G1 X178.401 Y160.635 E.0236
G2 X178.9 Y161.414 I6.379 J-3.536 E.03136
G1 X179.113 Y161.473 E.0075
G1 X179.639 Y161.481 E.0178
;PATH_TASK id=1466 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X179.689 Y161.894 F24000
;WIDTH:0.449086
G1 F6717
G1 X179.948 Y161.844 E.00889
G1 X180.164 Y161.695 E.00886
G1 X180.266 Y161.532 E.0065
G1 X180.28 Y160.938 E.02006
G1 X180.439 Y160.739 E.00861
G3 X180.739 Y160.684 I.216 J.335 E.01056
G1 X178.495 Y158.44 E.10717
G1 X178.167 Y158.088 E.01626
G1 X178.223 Y158.278 E.0067
G1 X178.153 Y158.524 E.00863
G1 X177.971 Y158.667 E.0078
G1 X177.635 Y158.687 E.01139
G1 X177.444 Y158.779 E.00714
G1 X177.235 Y159.007 E.01044
G1 X177.154 Y159.389 E.01316
G1 X177.175 Y159.85 E.0156
G1 X177.225 Y160.051 E.00699
G1 X177.549 Y160.373 E.01542
G1 X177.742 Y160.515 E.00809
G1 X178.124 Y160.943 E.01938
G1 X178.528 Y161.635 E.02709
G1 X178.752 Y161.794 E.00927
G1 X178.966 Y161.877 E.00775
G1 X179.649 Y161.893 E.02307
;PATH_TASK id=1467 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X176 Y161.564 F24000
;TYPE:Sparse infill
;WIDTH:0.45
G1 F6717
G1 X176 Y163.564 E.0677
G1 X177.012 Y164.523 E.04719
G3 X179.771 Y163.191 I2.613 J1.888 E.10807
G1 X178.817 Y162.265 E.045
G3 X177.981 Y161.481 I.28 J-1.136 E.04053
G2 X176.99 Y160.41 I-11.124 J9.299 E.04941
G1 X176 Y159.419 E.04742
G1 X176 Y155.274 E.1403
G1 X176.803 Y156.061 E.03805
G3 X178.496 Y153.626 I2.532 J-.045 E.10724
G1 X177.37 Y152.5 E.05392
G1 X181.515 Y152.5 E.1403
G1 X182.553 Y153.538 E.04972
G3 X184 Y154.24 I.261 J1.304 E.05846
G1 X184 Y153.957 E.00957
;PATH_TASK id=1468 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X183.939 Y156.401 F24000
;TYPE:Internal solid infill
;WIDTH:0.449999
G1 F6717
G1 X183.938 Y154.786 E.05465
G1 X183.831 Y154.707 E.00448
G1 X183.477 Y154.204 E.02083
G1 X183.151 Y153.987 E.01326
G1 X182.359 Y153.942 E.02684
G1 X182.028 Y154.017 E.01151
G1 X181.788 Y154.214 E.0105
G1 X182.499 Y154.96 E.03489
G1 X183.911 Y156.373 E.06762
;PATH_TASK id=1469 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X183.556 Y155.474 F24000
;WIDTH:0.428511
G1 F6717
G1 X183.556 Y154.958 E.01655
G1 X183.211 Y154.531 E.0176
G1 X182.957 Y154.363 E.00975
G1 X182.462 Y154.35 E.01588
G3 X183.527 Y155.446 I-124.63 J122.157 E.04899
;PATH_TASK id=1470 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X181.388 Y183.052 F24000
;WIDTH:0.405007
G1 F6717
G1 X183.142 Y184.806 E.07466
G1 X182.991 Y184.306 E.01573
G1 X182.734 Y183.885 E.01484
G1 X182.341 Y183.494 E.01669
G1 X181.924 Y183.241 E.01469
G1 X181.426 Y183.066 E.01589
;PATH_TASK id=1471 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X183.349 Y185.269 F24000
;WIDTH:0.449999
G1 F6717
G1 X181.107 Y183.027 E.10733
G1 X180.74 Y183 E.01244
G1 X180.529 Y183.025 E.0072
G1 X183.14 Y185.636 E.12497
G1 X183.112 Y185.784 E.00512
G1 X183.019 Y186.091 E.01084
G1 X180.038 Y183.11 E.14268
G1 X179.635 Y183.282 E.01485
G1 X182.825 Y186.472 E.1527
G1 X182.747 Y186.6 E.00506
G1 X182.576 Y186.799 E.00889
G1 X178.837 Y183.061 E.17898
G1 X178.639 Y183.049 E.00672
G1 X178.32 Y183.119 E.01108
G1 X182.279 Y187.078 E.18953
G1 X182.103 Y187.2 E.00724
G1 X181.916 Y187.291 E.00704
G1 X177.878 Y183.253 E.19331
G1 X177.543 Y183.447 E.01312
G1 X177.517 Y183.468 E.0011
G1 X181.515 Y187.465 E.19135
G1 X181.046 Y187.572 E.01627
G1 X177.225 Y183.751 E.18293
G1 X177.1 Y183.892 E.00637
G1 X176.981 Y184.083 E.00761
G1 X180.527 Y187.629 E.16976
G1 X180.381 Y187.641 E.00496
G1 X179.953 Y187.63 E.01451
G1 X176.812 Y184.49 E.15033
G1 X176.765 Y184.678 E.00656
G1 X176.736 Y184.989 E.0106
G1 X179.337 Y187.59 E.12447
G1 X178.64 Y187.468 E.02395
G1 X176.553 Y185.382 E.09988
;PATH_TASK id=1472 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X183.163 Y186.277 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.158551
G1 F6717
G1 X183.068 Y186.348 E.00114
G1 X183.056 Y186.47 E.00118
;PATH_TASK id=1473 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X178.434 Y187.614 F24000
;WIDTH:0.296815
G1 F6717
G1 X178.182 Y187.436 E.00651
;PATH_TASK id=1474 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.325999
G1 X177.919 Y187.248 E.00761
;PATH_TASK id=1475 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.365598
G1 X177.766 Y187.126 E.00527
;PATH_TASK id=1476 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.409137
G1 X177.612 Y187.003 E.00598
;PATH_TASK id=1477 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.440933
G3 X177.159 Y186.552 I3.236 J-3.699 E.02118
;PATH_TASK id=1478 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.410746
G1 X177.008 Y186.369 E.00724
;PATH_TASK id=1479 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.368861
G1 X176.902 Y186.218 E.005
;PATH_TASK id=1480 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.329961
G1 X176.796 Y186.067 E.0044
;PATH_TASK id=1481 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.291061
G1 X176.69 Y185.916 E.00381
;PATH_TASK id=1482 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.271612
G1 X176.584 Y185.765 E.00351
;PATH_TASK id=1483 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X177.31 Y183.375 F24000
;WIDTH:0.148948
G1 F6717
G1 X177.257 Y183.491 E.00112
G1 X177.139 Y183.54 E.00113
;PATH_TASK id=1484 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X179.436 Y183.239 F24000
;WIDTH:0.156339
G1 F6717
G3 X179.246 Y183.112 I.139 J-.412 E.00218
;PATH_TASK id=1485 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.134728
G2 X179.022 Y182.928 I-1.411 J1.491 E.00222
;PATH_TASK id=1486 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X180.339 Y182.952 F24000
;WIDTH:0.116361
G1 F6717
G2 X180.143 Y182.896 I-.296 J.663 E.00125
G1 X180.108 Y182.896 E.00021
;PATH_TASK id=1487 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X184 Y190.145 F24000
M204 P4000
;TYPE:Sparse infill
;WIDTH:0.45
G1 F6717
G1 X184 Y188.145 E.0677
G1 X182.904 Y187.049 E.05248
G3 X180.381 Y188.048 I-2.396 J-2.367 E.09453
G1 X179.742 Y188.032 E.02165
G1 X184 Y192.29 E.20385
G1 X184 Y196.436 E.1403
G1 X183.035 Y195.47 E.04622
G3 X182.119 Y195.799 I-.837 J-.89 E.03387
G1 X182.103 Y196.793 E.03365
;PATH_TASK id=1488 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X181.539 Y197.981 F24000
;TYPE:Internal solid infill
;WIDTH:0.410957
G1 F6717
G1 X182.177 Y198.58 E.02677
;PATH_TASK id=1489 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.447881
G1 X182.814 Y199.179 E.02945
G1 X183.939 Y200.304 E.05357
G1 X183.939 Y198.054 E.07577
G1 X183.28 Y198.054 E.02219
;PATH_TASK id=1490 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.436985
G1 X182.427 Y198.026 E.02796
;PATH_TASK id=1491 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.423971
G1 X181.574 Y197.999 E.02704
;PATH_TASK id=1492 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X182.731 Y198.485 F24000
;WIDTH:0.498405
G1 F6717
G1 X183.508 Y199.262 E.04165
G1 X183.508 Y198.485 E.02945
G1 X182.771 Y198.485 E.02793
;PATH_TASK id=1493 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X181.584 Y193.791 F24000
;WIDTH:0.608556
G1 F6717
G1 X181.815 Y194.053 E.01645
;PATH_TASK id=1494 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.546276
G2 X182.47 Y194.739 I5.789 J-4.872 E.03969
G1 X182.483 Y194.181 E.02336
G1 X182.415 Y193.954 E.0099
G1 X182.307 Y193.893 E.00518
G1 X181.95 Y193.873 E.01498
;PATH_TASK id=1495 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.564739
G1 X181.786 Y193.836 E.00726
;PATH_TASK id=1496 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.586647
G1 X181.623 Y193.8 E.00757
;PATH_TASK id=1497 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X181.41 Y193.633 F24000
;WIDTH:0.607022
G1 F6717
G1 X181.554 Y193.764 E.00913
;PATH_TASK id=1498 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X180.71 Y193.096 F24000
;WIDTH:0.391596
G1 F6717
G1 X180.913 Y193.279 E.00791
;PATH_TASK id=1499 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.4203
G1 X181.116 Y193.461 E.00857
;PATH_TASK id=1500 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.456199
G1 X181.19 Y193.504 E.00293
;PATH_TASK id=1501 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.499291
G1 X181.263 Y193.547 E.00323
;PATH_TASK id=1502 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.542384
G1 X181.337 Y193.59 E.00354
;PATH_TASK id=1503 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.585476
G1 X181.41 Y193.633 E.00384
;PATH_TASK id=1504 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.584044
G1 X181.379 Y193.54 E.00443
;PATH_TASK id=1505 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.538089
G1 X181.347 Y193.447 E.00405
;PATH_TASK id=1506 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.492133
G1 X181.316 Y193.353 E.00368
;PATH_TASK id=1507 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.446177
G1 X181.285 Y193.26 E.0033
;PATH_TASK id=1508 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.384616
G1 X181.254 Y193.167 E.0028
G1 X181.078 Y193.102 E.00532
G1 X180.75 Y193.097 E.00932
;PATH_TASK id=1509 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X180.453 Y192.721 F24000
;WIDTH:0.449999
G1 F6717
G1 X180.138 Y192.829 E.01127
G1 X180.017 Y192.927 E.00527
G1 X182.352 Y195.262 E.1118
G1 X182.381 Y195.372 E.00383
G1 X182.512 Y195.341 E.00454
G1 X182.77 Y195.158 E.01072
G1 X182.927 Y194.764 E.01435
G1 X182.937 Y194.188 E.01948
G1 X182.856 Y193.771 E.01439
G1 X182.661 Y193.546 E.01008
G1 X182.444 Y193.447 E.00809
G1 X181.87 Y193.384 E.01955
G1 X181.704 Y193.209 E.00815
G1 X181.642 Y193.02 E.00675
G1 X181.415 Y192.812 E.01041
G1 X181.084 Y192.731 E.01154
G1 X180.493 Y192.722 E.02001
;PATH_TASK id=1510 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X179.78 Y192.978 F24000
;WIDTH:0.449999
G1 F6717
G1 X182.195 Y195.393 E.11562
G1 X181.939 Y195.389 E.00869
G1 X181.774 Y195.548 E.00774
G1 X179.605 Y193.379 E.10382
G1 X179.02 Y193.369 E.01983
G1 X181.708 Y196.057 E.12868
G1 X181.698 Y196.623 E.01916
G1 X178.434 Y193.359 E.15625
G1 X177.849 Y193.349 E.01983
G1 X181.645 Y197.146 E.18173
G1 X181.519 Y197.342 E.00789
G3 X181.376 Y197.453 I-.402 J-.367 E.00614
G1 X177.263 Y193.339 E.19691
G1 X176.996 Y193.384 E.00915
G1 X176.844 Y193.496 E.00639
G1 X184 Y200.653 E.34256
G1 X184 Y201.228 E.01949
G1 X176.631 Y193.859 E.35278
G1 X176.583 Y193.994 E.00485
G1 X176.577 Y194.38 E.01309
G1 X178.371 Y196.174 E.08586
G1 X180.237 Y197.537 E.07823
G1 X180.113 Y197.917 E.01353
G1 X184 Y201.804 E.18607
G1 X184 Y202.38 E.01949
G1 X179.674 Y198.054 E.20709
G1 X179.099 Y198.054 E.01949
G1 X184 Y202.955 E.23465
G1 X184 Y203.531 E.01949
G1 X178.523 Y198.054 E.2622
G1 X177.947 Y198.054 E.01949
G1 X184 Y204.107 E.28976
G1 X184 Y204.682 E.01949
G1 X177.372 Y198.054 E.31732
G1 X176.796 Y198.054 E.01949
G1 X184 Y205.258 E.34488
G1 X184 Y205.834 E.01949
G1 X176.22 Y198.054 E.37244
G1 X176 Y198.054 E.00747
G1 X176 Y198.409 E.01202
G1 X184 Y206.41 E.383
G1 X184 Y206.985 E.01949
G1 X176 Y198.984 E.383
G1 X176 Y199.56 E.01949
G1 X183.94 Y207.5 E.38011
G1 X183.364 Y207.5 E.01949
G1 X176 Y200.136 E.35255
G1 X176 Y200.711 E.01949
G1 X182.789 Y207.5 E.32499
G1 X182.213 Y207.5 E.01949
G1 X176 Y201.287 E.29743
G1 X176 Y201.863 E.01949
G1 X181.637 Y207.5 E.26987
G1 X181.062 Y207.5 E.01949
G1 X176 Y202.438 E.24231
G1 X176 Y203.014 E.01949
G1 X180.486 Y207.5 E.21476
G1 X179.91 Y207.5 E.01949
G1 X176 Y203.59 E.1872
G1 X176 Y204.166 E.01949
G1 X179.334 Y207.5 E.15964
G1 X178.759 Y207.5 E.01949
G1 X176 Y204.741 E.13208
G1 X176 Y205.317 E.01949
G1 X178.183 Y207.5 E.10452
G1 X177.607 Y207.5 E.01949
G1 X176 Y205.893 E.07696
G1 X176 Y206.468 E.01949
G1 X177.215 Y207.684 E.05818
;PATH_TASK id=1511 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X178.016 Y196.14 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.115659
G1 F6717
G1 X177.778 Y195.936 E.0019
;PATH_TASK id=1512 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.163435
G1 X177.54 Y195.732 E.00314
;PATH_TASK id=1513 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.211212
G1 X177.301 Y195.528 E.00439
;PATH_TASK id=1514 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.258988
G1 X177.063 Y195.324 E.00564
;PATH_TASK id=1515 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.307877
G3 X176.814 Y195.108 I.995 J-1.404 E.00726
;PATH_TASK id=1516 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.309163
G1 X176.7 Y194.965 E.00406
;PATH_TASK id=1517 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.267327
G1 X176.586 Y194.821 E.00342
;PATH_TASK id=1518 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.22549
G1 X176.472 Y194.677 E.00279
;PATH_TASK id=1519 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
;WIDTH:0.204573
G1 X176.371 Y194.515 E.00256
;PATH_TASK id=1520 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X176.61 Y193.418 F24000
;WIDTH:0.153857
G1 F6717
G2 X176.575 Y193.597 I.785 J.244 E.00169
G1 X176.677 Y193.639 E.00101
;PATH_TASK id=1521 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X179.897 Y192.807 F24000
;WIDTH:0.117782
G1 F6717
G2 X179.793 Y192.938 I.329 J.366 E.00105
;PATH_TASK id=1522 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X181.613 Y197.903 F24000
;WIDTH:0.115945
G1 F6717
G1 X181.574 Y197.886 E.00026
G1 X181.291 Y197.651 E.00223
;PATH_TASK id=1523 conformal=0 surface=-1 source_layer=4 shell_offset=-1.000000
G1 X176.598 Y207.643 F24000
;WIDTH:0.449968
G1 F6717
G1 X175.857 Y206.902 E.03549
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:1.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;1.2
G1 E-.64 F2100
;WIPE_START
G1 F7200
G1 X176.564 Y207.609 E-.16
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;1.2
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=1524 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
M486 S0
G1 X184.346 Y207.846 Z1.2 F24000
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F6148
G1 X175.654 Y207.846 E.29424
G1 X175.654 Y152.154 E1.88514
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y207.806 E1.88378
;PATH_TASK id=1525 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
M204 T2500
G1 X184.389 Y207.806 F24000
G1 X184.389 Y207.889
G1 X184.775 Y208.275
M204 P2500
;TYPE:Outer wall
G1 F6148
G1 X175.225 Y208.275 E.32326
G1 X175.225 Y151.725 E1.91415
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y208.235 E1.91279
;PATH_TASK id=1526 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X183.775 Y208.239 E-.16
;WIPE_END
G1 X183.775 Y207.889 F24000
G1 X184.389 Y207.889
G1 X184.389 Y206.413
G1 X183.864 Y206.413
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.600388
G1 F6148
G1 X182.913 Y207.364 E.06238
G1 X183.864 Y207.364 E.04411
G1 X183.864 Y206.453 E.04226
;PATH_TASK id=1527 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X182.199 Y207.684 F24000
;WIDTH:0.449999
G1 F6148
G1 X184 Y205.882 E.08624
G1 X184 Y205.306 E.01949
G1 X181.806 Y207.5 E.10503
G1 X181.231 Y207.5 E.01949
G1 X184 Y204.731 E.13259
G1 X184 Y204.155 E.01949
G1 X180.655 Y207.5 E.16015
G1 X180.079 Y207.5 E.01949
G1 X184 Y203.579 E.18771
G1 X184 Y203.004 E.01949
G1 X179.504 Y207.5 E.21527
G1 X178.928 Y207.5 E.01949
G1 X184 Y202.428 E.24282
G1 X184 Y201.852 E.01949
G1 X178.352 Y207.5 E.27038
G1 X177.776 Y207.5 E.01949
G1 X184 Y201.276 E.29794
G1 X184 Y200.701 E.01949
G1 X177.201 Y207.5 E.3255
G1 X176.625 Y207.5 E.01949
G1 X184 Y200.125 E.35306
G1 X184 Y199.549 E.01949
G1 X176.049 Y207.5 E.38061
G1 X176 Y207.5 E.00169
G1 X176 Y206.975 E.0178
G1 X184 Y198.974 E.383
G1 X184 Y198.398 E.01949
G1 X176 Y206.399 E.383
G1 X176 Y205.823 E.01949
G1 X184 Y197.822 E.383
G1 X184 Y197.247 E.01949
G1 X176 Y205.247 E.383
G1 X176 Y204.672 E.01949
G1 X184 Y196.671 E.383
G1 X184 Y196.095 E.01949
G1 X176 Y204.096 E.383
G1 X176 Y203.52 E.01949
G1 X184 Y195.519 E.383
G1 X184 Y195.077 E.01496
G1 X184 Y195.193 E.00392
G1 X183.751 Y195.193 E.00845
G1 X176 Y202.945 E.37105
G1 X176 Y202.369 E.01949
G1 X183.175 Y195.193 E.34349
G1 X183.132 Y195.193 E.00145
G1 X182.91 Y194.948 E.01122
G1 X182.916 Y194.876 E.00244
G1 X176 Y201.793 E.33111
G1 X176 Y201.218 E.01949
G1 X182.935 Y194.282 E.33201
G1 X182.938 Y194.08 E.00682
G1 X182.86 Y193.782 E.01045
G1 X176 Y200.642 E.32839
G1 X176 Y200.066 E.01949
M73 P84 R6
G1 X182.568 Y193.498 E.31443
G1 X182.397 Y193.432 E.0062
G1 X182.067 Y193.423 E.01117
G1 X176 Y199.491 E.29045
G1 X176 Y198.915 E.01949
G1 X181.704 Y193.211 E.27306
G2 X181.656 Y193.028 I-.571 J.053 E.00642
G1 X181.603 Y192.955 E.00305
G1 X181.48 Y192.859 E.00528
G1 X176 Y198.339 E.26234
G1 X176 Y197.763 E.01949
G1 X181.033 Y192.73 E.24096
G1 X180.466 Y192.721 E.0192
G1 X176 Y197.188 E.21381
G1 X176 Y196.612 E.01949
G1 X179.239 Y193.373 E.15506
G1 X178.673 Y193.363 E.01916
G1 X176 Y196.036 E.12796
G1 X176 Y195.461 E.01949
G1 X178.107 Y193.354 E.10086
G1 X177.541 Y193.344 E.01916
G1 X176.392 Y194.493 E.05499
;PATH_TASK id=1528 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X177.314 Y193.137 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.398141
G1 F6148
G1 X176.979 Y193.365 E.01197
;PATH_TASK id=1529 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.429667
G1 X176.73 Y193.58 E.0106
G1 X176.38 Y193.987 E.01727
;PATH_TASK id=1530 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X177.432 Y193.139 F24000
;WIDTH:0.222325
G1 F6148
G1 X176.521 Y193.56 E.01498
;PATH_TASK id=1531 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X180.23 Y192.558 F24000
;WIDTH:0.102714
G1 F6148
G1 X179.726 Y193.135 E.00381
G3 X179.439 Y193.325 I-.726 J-.783 E.00172
;PATH_TASK id=1532 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X180.314 Y192.547 F24000
;WIDTH:0.162799
G1 F6148
G1 X180.173 Y192.638 E.00167
;PATH_TASK id=1533 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.193662
G2 X180.027 Y192.749 I.767 J1.162 E.0023
;PATH_TASK id=1534 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.220681
G1 X179.897 Y192.876 E.00268
G1 X179.471 Y193.403 E.01003
;PATH_TASK id=1535 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X181.365 Y192.686 F24000
;WIDTH:0.155071
G1 F6148
G1 X181.179 Y192.528 E.00228
;PATH_TASK id=1536 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X181.487 Y192.635 F24000
;WIDTH:0.106312
G1 F6148
G1 X181.388 Y192.621 E.00053
;PATH_TASK id=1537 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.120852
G1 X181.213 Y192.632 E.00113
;PATH_TASK id=1538 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X182.981 Y194.524 F24000
;WIDTH:0.0954698
G1 F6148
G1 X183.131 Y194.75 E.00118
;PATH_TASK id=1539 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X183.97 Y194.902 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.388958
G1 F6148
G1 X183.97 Y187.532 E.21205
;PATH_TASK id=1540 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X182.268 Y187.063 F24000
;WIDTH:0.486886
G1 F6148
G1 X182.739 Y186.58 E.0249
;PATH_TASK id=1541 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X183.306 Y185.711 F24000
;WIDTH:0.449999
G1 F6148
G1 X181.572 Y187.445 E.08302
G1 X180.838 Y187.604 E.02543
G1 X183.164 Y185.277 E.11136
G1 X183.162 Y185.04 E.00804
G1 X183.141 Y184.869 E.00582
G1 X183.112 Y184.754 E.00403
G1 X180.229 Y187.637 E.13802
G1 X179.667 Y187.623 E.01902
G1 X182.973 Y184.317 E.15825
G1 X182.758 Y183.956 E.01422
G1 X179.156 Y187.558 E.17242
G1 X178.664 Y187.475 E.01691
G1 X182.485 Y183.654 E.1829
G1 X182.241 Y183.447 E.01082
G1 X182.164 Y183.399 E.00307
G1 X178.236 Y187.327 E.18802
G1 X178.096 Y187.276 E.00503
G1 X177.957 Y187.208 E.00526
G1 X177.847 Y187.14 E.00437
G1 X181.776 Y183.211 E.18806
G1 X181.587 Y183.129 E.00698
G1 X181.343 Y183.068 E.00851
G1 X177.507 Y186.904 E.18363
G1 X177.225 Y186.61 E.01378
G1 X180.832 Y183.003 E.17266
G1 X180.739 Y183 E.00314
G1 X180.193 Y183.066 E.01862
G1 X176.994 Y186.266 E.15315
G1 X176.848 Y185.955 E.01163
G1 X176.82 Y185.865 E.0032
G1 X179.346 Y183.338 E.12095
G1 X179.242 Y183.323 E.00355
G2 X178.988 Y183.121 I-.766 J.702 E.01105
G1 X176.737 Y185.372 E.10777
G1 X176.716 Y185.216 E.00534
G1 X176.756 Y184.777 E.01491
G1 X178.668 Y182.865 E.09152
;PATH_TASK id=1542 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X182.163 Y183.16 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.14239
G1 F6148
G1 X182.032 Y183.162 E.00109
G1 X181.995 Y183.275 E.00098
;PATH_TASK id=1543 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X180.03 Y182.914 F24000
;WIDTH:0.113672
G1 F6148
G1 X179.906 Y182.998 E.00089
;PATH_TASK id=1544 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.157475
G1 X179.781 Y183.082 E.00143
;PATH_TASK id=1545 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.201278
G1 X179.656 Y183.166 E.00198
;PATH_TASK id=1546 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.223179
G1 X179.532 Y183.251 E.00226
;PATH_TASK id=1547 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X178.186 Y182.939 F24000
;WIDTH:0.336303
G1 F6148
G1 X177.97 Y183.105 E.00665
;PATH_TASK id=1548 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.372348
G1 X177.754 Y183.271 E.00746
;PATH_TASK id=1549 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.408547
G1 X177.536 Y183.438 E.00835
;PATH_TASK id=1550 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.437833
G1 X177.363 Y183.594 E.00766
G1 X177.09 Y183.885 E.01309
;PATH_TASK id=1551 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.41152
G1 X177.016 Y183.978 E.00365
;PATH_TASK id=1552 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.384131
G1 X176.939 Y184.075 E.00352
;PATH_TASK id=1553 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.349467
G1 X176.846 Y184.213 E.00423
;PATH_TASK id=1554 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.308883
G1 X176.754 Y184.351 E.00367
;PATH_TASK id=1555 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.268299
G1 X176.661 Y184.489 E.00311
;PATH_TASK id=1556 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.248007
G1 X176.569 Y184.627 E.00283
;PATH_TASK id=1557 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X176.649 Y185.557 F24000
;WIDTH:0.104814
G1 F6148
G2 X176.608 Y185.79 I.789 J.259 E.00122
;PATH_TASK id=1558 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X179.481 Y187.705 F24000
;WIDTH:0.0975861
G1 F6148
G1 X179.278 Y187.758 E.00095
G1 X179.252 Y187.742 E.00014
;PATH_TASK id=1559 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X178.274 Y192.949 F24000
M204 P4000
;TYPE:Sparse infill
;WIDTH:0.45
G1 F6148
G1 X179.545 Y192.971 E.04302
G3 X179.997 Y192.432 I.829 J.235 E.02452
G1 X176.456 Y188.892 E.16946
G1 X177.775 Y187.573 E.06313
G2 X179.351 Y188 I1.856 J-3.728 E.05563
G1 X180.648 Y189.296 E.06205
G1 X180.865 Y189.155 E.00878
G1 X183.593 Y191.883 E.13059
G1 X183.593 Y193.883 E.0677
;PATH_TASK id=1560 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X176.03 Y194.505 F24000
;TYPE:Internal solid infill
;WIDTH:0.388958
G1 F6148
G1 X176.03 Y188.678 E.16765
;PATH_TASK id=1561 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X182.519 Y177.399 F24000
;WIDTH:0.513986
G1 F6148
G1 X182.866 Y177.036 E.01966
;PATH_TASK id=1562 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X183.476 Y176.108 F24000
;WIDTH:0.449999
G1 F6148
G1 X181.743 Y177.842 E.083
G1 X181.47 Y177.908 E.00949
G1 X181.082 Y177.927 E.01317
G1 X183.315 Y175.694 E.10689
G1 X183.33 Y175.403 E.00985
G1 X183.289 Y175.144 E.00889
G1 X180.57 Y177.862 E.13014
G1 X180.445 Y177.83 E.0044
G1 X180.155 Y177.702 E.0107
G1 X183.172 Y174.685 E.14441
G1 X183.128 Y174.571 E.00415
G1 X182.975 Y174.306 E.01033
G1 X179.777 Y177.504 E.15306
G1 X179.662 Y177.493 E.00394
G1 X179.368 Y177.618 E.01082
G1 X179.239 Y177.649 E.00448
G1 X179.042 Y177.664 E.00669
G1 X182.731 Y173.975 E.17659
G1 X182.5 Y173.754 E.01082
G1 X182.428 Y173.702 E.00301
G1 X178.482 Y177.648 E.18887
G1 X178.182 Y177.575 E.01044
G1 X178.04 Y177.514 E.00524
G1 X182.06 Y173.494 E.19243
G1 X181.945 Y173.435 E.00439
G1 X181.753 Y173.368 E.00688
G1 X181.634 Y173.345 E.00412
G1 X177.681 Y177.298 E.1892
G1 X177.463 Y177.114 E.00965
G1 X177.384 Y177.018 E.00419
G1 X181.099 Y173.304 E.17782
G1 X180.635 Y173.352 E.01581
G1 X180.516 Y173.375 E.00408
G1 X180.412 Y173.415 E.00377
G1 X177.145 Y176.682 E.15638
G1 X176.979 Y176.273 E.01495
G1 X179.626 Y173.625 E.12674
G1 X179.488 Y173.56 E.00517
G1 X179.18 Y173.496 E.01067
G1 X176.899 Y175.777 E.10919
G1 X176.879 Y175.506 E.0092
G1 X176.926 Y175.175 E.01133
G1 X178.825 Y173.275 E.09092
;PATH_TASK id=1563 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X180.901 Y178.023 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.100161
G1 F6148
G1 X180.687 Y178.065 E.00104
G1 X180.661 Y178.047 E.00015
;PATH_TASK id=1564 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X177.824 Y177.466 F24000
;WIDTH:0.135797
G1 F6148
G1 X177.785 Y177.545 E.00068
G1 X177.639 Y177.513 E.00115
;PATH_TASK id=1565 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X178.453 Y173.3 F24000
;WIDTH:0.243761
G1 F6148
G1 X178.219 Y173.449 E.00463
;PATH_TASK id=1566 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.268114
G1 X178.112 Y173.527 E.00247
;PATH_TASK id=1567 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.310419
G1 X178.004 Y173.604 E.00294
;PATH_TASK id=1568 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.352724
G1 X177.897 Y173.681 E.0034
;PATH_TASK id=1569 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.39556
G1 X177.787 Y173.76 E.00397
;PATH_TASK id=1570 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.437947
G1 X177.616 Y173.909 E.00746
G2 X177.193 Y174.361 I3.682 J3.862 E.02034
;PATH_TASK id=1571 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.385141
G1 X177.047 Y174.565 E.00713
;PATH_TASK id=1572 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.340519
G1 X176.901 Y174.768 E.0062
;PATH_TASK id=1573 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.318208
G1 X176.754 Y174.971 E.00573
;PATH_TASK id=1574 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X179.041 Y173.348 F24000
;WIDTH:0.137388
G1 F6148
G1 X178.817 Y173.256 E.0019
;PATH_TASK id=1575 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X179.095 Y173.29 F24000
;WIDTH:0.102545
G1 F6148
G1 X179.065 Y173.291 E.00015
G2 X178.892 Y173.342 I.129 J.756 E.0009
;PATH_TASK id=1576 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X180.187 Y173.324 F24000
;WIDTH:0.109496
G1 F6148
G1 X180.086 Y173.396 E.00069
;PATH_TASK id=1577 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.144948
G1 X179.986 Y173.469 E.00105
;PATH_TASK id=1578 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.176091
G3 X179.895 Y173.542 I-.584 J-.635 E.0013
G1 X179.815 Y173.483 E.0011
;PATH_TASK id=1579 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X182.44 Y173.47 F24000
;WIDTH:0.143263
G1 F6148
G1 X182.315 Y173.457 E.00105
G1 X182.275 Y173.548 E.00083
;PATH_TASK id=1580 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X183.365 Y174.954 F24000
;WIDTH:0.11485
G1 F6148
G2 X183.388 Y174.74 I-.684 J-.184 E.00129
;PATH_TASK id=1581 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X181.685 Y170.412 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.449999
G1 F6148
G1 X182.691 Y170.429 E.03405
G1 X182.93 Y170.383 E.00824
G1 X183.199 Y170.188 E.01127
G1 X183.352 Y169.798 E.01415
G1 X183.363 Y169.153 E.02183
G1 X183.283 Y168.813 E.01183
G1 X181.713 Y170.383 E.07517
;PATH_TASK id=1582 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X182.751 Y169.969 F24000
;WIDTH:0.516884
G1 F6148
G1 X182.812 Y169.916 E.0032
;PATH_TASK id=1583 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X183.285 Y168.523 F24000
;WIDTH:0.449999
G1 F6148
G1 X181.402 Y170.407 E.09016
G1 X180.836 Y170.397 E.01916
G1 X182.77 Y168.463 E.09259
G1 X182.333 Y168.456 E.0148
G1 X182.304 Y168.353 E.00363
G1 X179.065 Y171.592 E.15508
G1 X178.786 Y171.586 E.00945
G1 X178.618 Y171.541 E.00587
G1 X178.567 Y171.515 E.00196
G1 X183.334 Y166.747 E.22821
G1 X183.383 Y166.64 E.00399
G1 X183.435 Y166.471 E.00599
G1 X183.489 Y166.017 E.01547
G1 X178.285 Y171.221 E.24912
G2 X178.082 Y170.848 I-1.985 J.835 E.0144
G1 X183.454 Y165.476 E.25714
G1 X183.445 Y165.396 E.00274
G1 X183.388 Y165.192 E.00716
G1 X183.318 Y165.036 E.00578
G1 X177.841 Y170.513 E.26217
G1 X177.566 Y170.212 E.01379
G1 X183.116 Y164.663 E.26566
G1 X182.853 Y164.366 E.01341
G1 X182.844 Y164.359 E.00039
G1 X177.236 Y169.967 E.26845
G1 X177.061 Y169.773 E.00885
G3 X177.006 Y169.621 I.352 J-.212 E.0055
G1 X182.514 Y164.113 E.26364
G1 X182.389 Y164.03 E.00508
G1 X182.136 Y163.916 E.0094
G1 X178.24 Y167.812 E.1865
G1 X177.897 Y167.578 E.01402
G1 X181.715 Y163.76 E.18276
G1 X181.588 Y163.726 E.00446
G1 X181.235 Y163.665 E.01213
G1 X177.593 Y167.308 E.17437
G1 X177.374 Y167.041 E.01167
G1 X177.341 Y166.984 E.00224
G1 X180.712 Y163.612 E.16139
G1 X180.162 Y163.586 E.01864
G1 X177.159 Y166.59 E.14375
G1 X177.098 Y166.396 E.00688
G1 X177.067 Y166.106 E.00987
G1 X179.564 Y163.609 E.11954
G1 X178.999 Y163.69 E.01934
G1 X178.877 Y163.72 E.00425
G1 X176.875 Y165.723 E.09585
;PATH_TASK id=1584 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X178.093 Y167.958 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.44997
G1 F6148
G1 X176.78 Y169.271 E.06285
;PATH_TASK id=1585 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X177.224 Y166.811 F24000
;WIDTH:0.152812
G1 F6148
G1 X177.106 Y166.847 E.00113
G2 X177.107 Y166.913 I.186 J.028 E.00061
;PATH_TASK id=1586 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.116654
G1 X177.12 Y166.977 E.0004
;PATH_TASK id=1587 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X178.662 Y163.578 F24000
;WIDTH:0.295251
G1 F6148
G1 X178.414 Y163.756 E.00641
;PATH_TASK id=1588 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.325921
G1 X178.165 Y163.934 E.00719
;PATH_TASK id=1589 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.365886
G1 X177.979 Y164.084 E.00641
;PATH_TASK id=1590 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.415344
G1 X177.793 Y164.236 E.00745
;PATH_TASK id=1591 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.444937
G1 X177.623 Y164.399 E.00787
;PATH_TASK id=1592 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.436895
G1 X177.482 Y164.557 E.00693
;PATH_TASK id=1593 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.411239
G1 X177.342 Y164.716 E.00648
;PATH_TASK id=1594 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.383661
G1 X177.129 Y164.995 E.00996
;PATH_TASK id=1595 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.368911
G1 X176.915 Y165.274 E.00953
;PATH_TASK id=1596 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X181.142 Y163.458 F24000
;WIDTH:0.0992443
G1 F6148
G2 X180.899 Y163.532 I.224 J1.169 E.00119
;PATH_TASK id=1597 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X182.904 Y164.142 F24000
;WIDTH:0.137813
G1 F6148
G1 X182.771 Y164.104 E.00109
G1 X182.755 Y164.122 E.00019
;PATH_TASK id=1598 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.114659
G1 X182.724 Y164.172 E.00035
;PATH_TASK id=1599 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X183.341 Y164.635 F24000
;WIDTH:0.149138
G1 F6148
G3 X183.363 Y164.779 I-.869 J.207 E.00129
G1 X183.267 Y164.82 E.00092
;PATH_TASK id=1600 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X183.441 Y166.957 F24000
;WIDTH:0.115915
G1 F6148
G1 X183.347 Y167.091 E.00099
;PATH_TASK id=1601 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.165325
G3 X183.191 Y167.282 I-2.518 J-1.899 E.00251
;PATH_TASK id=1602 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.197548
G3 X182.741 Y167.728 I-3.259 J-2.837 E.00814
;PATH_TASK id=1603 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.161124
G1 X182.581 Y167.853 E.002
;PATH_TASK id=1604 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.138006
G1 X182.421 Y167.979 E.00161
;PATH_TASK id=1605 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X180.178 Y170.692 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.396119
G1 F6148
G3 X179.285 Y171.62 I-7.613 J-6.435 E.03785
G1 X179.659 Y171.617 E.01099
G1 X179.857 Y171.541 E.00624
G1 X180.111 Y171.283 E.01061
G1 X180.173 Y170.732 E.0163
;PATH_TASK id=1606 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X177.083 Y168.686 F24000
;WIDTH:0.442884
G1 F6148
G1 X177.24 Y168.52 E.0076
;PATH_TASK id=1607 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X179.384 Y161.884 F24000
;WIDTH:0.452978
G1 F6148
G1 X179.896 Y161.862 E.01747
G1 X180.189 Y161.652 E.01228
G1 X180.265 Y161.478 E.00647
G1 X180.273 Y160.995 E.01648
G1 X179.412 Y161.856 E.04151
;PATH_TASK id=1608 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X181.819 Y160.886 F24000
;WIDTH:0.449999
G1 F6148
G1 X183.469 Y159.236 E.07898
G1 X183.39 Y158.996 E.00855
G1 X183.263 Y158.867 E.00613
G1 X181.434 Y160.696 E.08757
G1 X180.867 Y160.686 E.01916
G1 X183.544 Y158.009 E.12814
G1 X183.562 Y157.48 E.01793
G3 X183.587 Y157.392 I.208 J.011 E.00313
G1 X179.097 Y161.881 E.21492
G1 X178.96 Y161.878 E.00463
G1 X178.846 Y161.855 E.00396
G1 X178.648 Y161.754 E.0075
G1 X184 Y156.402 E.25622
G1 X184 Y155.826 E.01949
G1 X178.405 Y161.421 E.26784
G2 X178.195 Y161.056 I-1.954 J.879 E.0143
G1 X184 Y155.251 E.2779
G1 X184 Y154.811 E.01489
G1 X183.904 Y154.772 E.00353
G1 X177.942 Y160.733 E.28537
G2 X177.717 Y160.491 I-1.163 J.858 E.01123
G1 X177.653 Y160.447 E.00263
G1 X183.65 Y154.449 E.28708
G1 X183.467 Y154.189 E.01079
G1 X183.387 Y154.137 E.00322
G1 X177.337 Y160.187 E.2896
G1 X177.224 Y160.06 E.00574
G1 X177.156 Y159.866 E.00697
G1 X177.149 Y159.799 E.0023
G1 X182.993 Y153.955 E.27973
G1 X182.429 Y153.943 E.01909
G1 X178.249 Y158.123 E.20008
G1 X178.282 Y158.146 E.00136
G1 X178.113 Y158.671 E.01866
G1 X177.7 Y158.673 E.014
G1 X176.968 Y159.404 E.03501
;PATH_TASK id=1609 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X177.784 Y158.013 F24000
G1 F6148
G1 X181.057 Y154.74 E.15667
G1 X180.748 Y154.473 E.01381
G1 X177.653 Y157.568 E.14818
G1 X177.526 Y157.402 E.00708
G1 X177.429 Y157.217 E.00708
G1 X180.412 Y154.234 E.14279
G1 X180.168 Y154.095 E.0095
G1 X180.029 Y154.041 E.00505
G1 X177.288 Y156.782 E.13121
G1 X177.254 Y156.674 E.00383
G1 X177.225 Y156.269 E.01375
G1 X179.57 Y153.924 E.11224
G1 X179.403 Y153.904 E.00571
G1 X178.969 Y153.949 E.01477
G1 X177.044 Y155.875 E.09216
;PATH_TASK id=1610 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X183.704 Y158.166 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.110464
G1 F6148
G1 X183.64 Y158.259 E.00063
;PATH_TASK id=1611 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.147855
G1 X183.576 Y158.351 E.00098
;PATH_TASK id=1612 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.185157
G3 X183.375 Y158.585 I-1.529 J-1.114 E.00365
G1 X183.448 Y158.76 E.00225
;PATH_TASK id=1613 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X182.259 Y153.741 F24000
;WIDTH:0.262438
G1 F6148
G1 X182.019 Y153.908 E.00533
;PATH_TASK id=1614 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.278945
G1 X181.918 Y153.99 E.00257
;PATH_TASK id=1615 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.307454
G2 X181.721 Y154.176 I.547 J.777 E.00597
G1 X181.472 Y154.508 E.00912
;PATH_TASK id=1616 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X182.327 Y153.735 F24000
;WIDTH:0.176484
G1 F6148
G1 X181.602 Y154.117 E.0091
;PATH_TASK id=1617 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X180.808 Y154.255 F24000
;WIDTH:0.154467
G1 F6148
G1 X180.672 Y154.214 E.00131
G1 X180.61 Y154.112 E.00111
;PATH_TASK id=1618 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X179.96 Y153.828 F24000
;WIDTH:0.106344
G1 F6148
G2 X179.766 Y153.869 I-.017 J.399 E.00105
;PATH_TASK id=1619 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X178.795 Y153.763 F24000
;WIDTH:0.29845
G1 F6148
G1 X178.464 Y153.985 E.00846
;PATH_TASK id=1620 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.319798
G1 X178.357 Y154.063 E.00305
;PATH_TASK id=1621 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.358896
G1 X178.251 Y154.142 E.00348
;PATH_TASK id=1622 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.398346
G1 X178.143 Y154.222 E.00398
;PATH_TASK id=1623 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.438045
G2 X177.538 Y154.835 I2.582 J3.151 E.02834
;PATH_TASK id=1624 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.382237
G1 X177.39 Y155.042 E.00718
;PATH_TASK id=1625 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.334292
G1 X177.242 Y155.249 E.00617
;PATH_TASK id=1626 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.31032
G1 X177.094 Y155.456 E.00566
;PATH_TASK id=1627 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X177.223 Y156.976 F24000
;WIDTH:0.112361
G1 F6148
G2 X177.213 Y157.156 I.526 J.118 E.00105
;PATH_TASK id=1628 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X177.537 Y158.521 F24000
;WIDTH:0.103828
G1 F6148
G1 X177.465 Y158.567 E.00043
;PATH_TASK id=1629 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.141443
G1 X177.298 Y158.699 E.00175
;PATH_TASK id=1630 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.158079
G2 X177.023 Y159.025 I2.441 J2.341 E.00409
;PATH_TASK id=1631 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X177.451 Y160.474 F24000
;WIDTH:0.118004
G1 F6148
G1 X177.251 Y160.395 E.00134
;PATH_TASK id=1632 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X180.679 Y160.763 F24000
;WIDTH:0.195529
G1 F6148
G2 X180.412 Y160.956 I.129 J.459 E.00428
;PATH_TASK id=1633 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.174345
G1 X180.44 Y160.993 E.00051
;PATH_TASK id=1634 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
;WIDTH:0.161434
G1 X180.469 Y161.03 E.00046
;PATH_TASK id=1635 conformal=0 surface=-1 source_layer=5 shell_offset=-1.000000
G1 X182.373 Y160.674 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.537874
G1 F6148
G1 X183.016 Y160.651 E.02649
G1 X183.323 Y160.453 E.01503
G1 X183.471 Y160.086 E.0163
G1 X183.479 Y159.579 E.02085
G3 X182.401 Y160.646 I-51.173 J-50.643 E.06241
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:1.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;1.4
G1 E-.64 F2100
;WIPE_START
G1 F9091.765
G1 X183.112 Y159.943 E-.16
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;1.4
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=1636 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
M486 S0
G1 X184.346 Y207.846 Z1.4 F24000
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F6244
G1 X175.654 Y207.846 E.29424
G1 X175.654 Y152.154 E1.88514
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y207.806 E1.88378
;PATH_TASK id=1637 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
M204 T2500
G1 X184.389 Y207.806 F24000
G1 X184.389 Y207.889
G1 X184.775 Y208.275
M204 P2500
;TYPE:Outer wall
G1 F6244
G1 X175.225 Y208.275 E.32326
G1 X175.225 Y151.725 E1.91415
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y208.235 E1.91279
;PATH_TASK id=1638 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X183.775 Y208.239 E-.16
;WIPE_END
G1 X183.775 Y207.46 F24000
G1 X183.96 Y207.46
G1 X183.96 Y204.411
G1 X183.408 Y204.411
G1 X183.408 Y204.186
G1 E.8 F1800
M204 P1500
;TYPE:Top surface
;WIDTH:0.426852
G1 F6000
G1 X184.185 Y204.962 E.03507
;PATH_TASK id=1639 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X184.185 Y205.505 F24000
G1 F6000
G1 X182.865 Y204.186 E.05958
;PATH_TASK id=1640 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X182.322 Y204.186 F24000
G1 F6000
G1 X184.185 Y206.048 E.0841
;PATH_TASK id=1641 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X184.185 Y206.591 F24000
G1 F6000
G1 X181.779 Y204.186 E.10861
;PATH_TASK id=1642 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X181.236 Y204.186 F24000
G1 F6000
G1 X184.185 Y207.134 E.13312
;PATH_TASK id=1643 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X184.185 Y207.677 F24000
G1 F6000
G1 X180.694 Y204.186 E.15764
;PATH_TASK id=1644 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X180.151 Y204.186 F24000
G1 F6000
G1 X183.65 Y207.685 E.15799
;PATH_TASK id=1645 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X183.107 Y207.685 F24000
G1 F6000
G1 X179.608 Y204.186 E.15799
;PATH_TASK id=1646 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X179.065 Y204.186 F24000
G1 F6000
G1 X182.564 Y207.685 E.15799
;PATH_TASK id=1647 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X182.021 Y207.685 F24000
G1 F6000
G1 X178.522 Y204.186 E.15799
;PATH_TASK id=1648 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X177.979 Y204.186 F24000
G1 F6000
G1 X181.478 Y207.685 E.15799
;PATH_TASK id=1649 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X180.935 Y207.685 F24000
G1 F6000
G1 X177.436 Y204.186 E.15799
;PATH_TASK id=1650 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X176.893 Y204.186 F24000
G1 F6000
G1 X180.392 Y207.685 E.15799
;PATH_TASK id=1651 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X179.849 Y207.685 F24000
G1 F6000
G1 X176.35 Y204.186 E.15799
;PATH_TASK id=1652 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X175.815 Y204.194 F24000
G1 F6000
G1 X179.306 Y207.685 E.15763
;PATH_TASK id=1653 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X178.763 Y207.685 F24000
G1 F6000
G1 X175.815 Y204.737 E.13312
;PATH_TASK id=1654 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X175.815 Y205.28 F24000
G1 F6000
G1 X178.22 Y207.685 E.10861
;PATH_TASK id=1655 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X177.677 Y207.685 F24000
G1 F6000
G1 X175.815 Y205.823 E.08409
;PATH_TASK id=1656 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X175.815 Y206.365 F24000
G1 F6000
G1 X177.135 Y207.685 E.05958
;PATH_TASK id=1657 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X176.592 Y207.685 F24000
G1 F6000
G1 X175.815 Y206.908 E.03507
;PATH_TASK id=1658 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F6000
G1 X176.522 Y207.616 E-.16
;WIPE_END
G1 X176.122 Y203.881 F24000
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.513006
G1 F6244
G2 X176.122 Y203.983 I-.029 J.051 E.00962
G1 X176.131 Y203.966 E.00073
;PATH_TASK id=1659 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X176.699 Y194.619 F24000
;WIDTH:0.498199
G1 F6244
G1 X176.085 Y194.925 E.02598
G1 X176.085 Y195.402 E.01806
G1 X176.421 Y195.466 E.01295
G1 X176.686 Y194.657 E.03222
;PATH_TASK id=1660 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X177.089 Y194.275 F24000
;WIDTH:0.38292
G1 F6244
G1 X177.133 Y194.445 E.00499
G1 X176.999 Y194.288 E.00586
G1 X177.049 Y194.28 E.00144
;PATH_TASK id=1661 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X177.318 Y193.836 F24000
G1 F6244
G1 X177.254 Y193.873 E.00208
G1 X177.319 Y193.907 E.00208
;PATH_TASK id=1662 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X181.72 Y193.893 F24000
;WIDTH:0.459752
G1 F6244
G1 X182.438 Y194.612 E.03521
;PATH_TASK id=1663 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X183.493 Y195.666 F24000
G1 F6244
G1 X184 Y196.174 E.02488
G1 X184 Y196.764 E.02043
G1 X183.105 Y195.868 E.04388
G1 X182.834 Y195.868 E.00941
G1 X182.209 Y195.181 E.03219
G1 X182.227 Y194.991 E.00664
G1 X180.636 Y193.399 E.07801
G1 X180.542 Y193.398 E.00325
G1 X180.444 Y193.674 E.01016
G1 X180.371 Y193.724 E.00305
G1 X184 Y197.353 E.17788
G1 X184 Y197.943 E.02043
G1 X180.023 Y193.965 E.19495
G1 X179.888 Y194.059 E.0057
G1 X179.521 Y194.053 E.01272
G1 X184 Y198.532 E.21956
G1 X184 Y199.122 E.02043
G1 X178.921 Y194.043 E.24895
G1 X178.322 Y194.032 E.02079
G1 X184 Y199.711 E.27835
G1 X184 Y200.301 E.02043
G1 X177.722 Y194.022 E.30774
G1 X177.291 Y194.017 E.01495
G2 X177.256 Y194.146 I.174 J.116 E.00469
G1 X184 Y200.89 E.33059
G1 X184 Y201.48 E.02043
G1 X177.419 Y194.899 E.32258
G1 X177.209 Y195.278 E.01503
G1 X184 Y202.069 E.33289
G1 X184 Y202.659 E.02043
G1 X176.999 Y195.657 E.34321
G1 X176.881 Y195.868 E.0084
G1 X176.621 Y195.868 E.00901
G1 X184 Y203.248 E.36172
G1 X184 Y203.837 E.02043
G1 X176 Y195.837 E.39217
G1 X176 Y196.426 E.02043
G1 X183.537 Y203.963 E.36944
G1 X182.947 Y203.963 E.02043
G1 X176 Y197.016 E.34055
G1 X176 Y197.605 E.02043
G1 X182.358 Y203.963 E.31166
G1 X181.768 Y203.963 E.02043
G1 X176 Y198.195 E.28276
G1 X176 Y198.784 E.02043
G1 X181.179 Y203.963 E.25387
G1 X180.589 Y203.963 E.02043
G1 X176 Y199.374 E.22497
G1 X176 Y199.963 E.02043
G1 X180 Y203.963 E.19608
G1 X179.41 Y203.963 E.02043
G1 X176 Y200.552 E.16718
G1 X176 Y201.142 E.02043
G1 X178.821 Y203.963 E.13829
G1 X178.231 Y203.963 E.02043
G1 X176 Y201.731 E.10939
G1 X176 Y202.321 E.02043
G1 X177.642 Y203.963 E.0805
G1 X177.052 Y203.963 E.02043
G1 X176 Y202.91 E.0516
G1 X176 Y203.5 E.02043
G1 X176.646 Y204.146 E.03169
;PATH_TASK id=1664 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X176.609 Y195.622 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.226579
G1 F6244
G1 X175.857 Y195.476 E.0117
;PATH_TASK id=1665 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X176.674 Y195.412 F24000
;WIDTH:0.194689
G1 F6244
G1 X176.539 Y195.58 E.00272
G1 X176.482 Y195.582 E.00073
;PATH_TASK id=1666 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
;WIDTH:0.216729
G1 X176.363 Y195.61 E.00176
;PATH_TASK id=1667 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
;WIDTH:0.250483
G1 X176.244 Y195.639 E.00211
;PATH_TASK id=1668 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
;WIDTH:0.267359
G1 X176.126 Y195.668 E.00228
;PATH_TASK id=1669 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X177.336 Y194.7 F24000
;WIDTH:0.267993
G1 F6244
G1 X177.049 Y194.339 E.00862
;PATH_TASK id=1670 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X181.653 Y193.96 F24000
;WIDTH:0.234961
G1 F6244
G1 X181.249 Y193.599 E.00865
G1 X180.927 Y193.2 E.00819
;PATH_TASK id=1671 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X184.143 Y204.089 F24000
;WIDTH:0.147324
G1 F6244
G1 X183.968 Y204.123 E.00155
G1 X183.708 Y204.095 E.00227
;PATH_TASK id=1672 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X183.131 Y195.642 F24000
M204 P1500
;TYPE:Internal Bridge
;WIDTH:0.4
;HEIGHT:0.4
G1 F4500
G1 X183.979 Y194.795 E.06264
G1 X183.979 Y194.158 E.03325
G1 X182.868 Y195.269 E.08208
G1 X182.654 Y195.033 E.01665
G1 X182.674 Y194.827 E.01081
G1 X183.979 Y193.522 E.09646
G1 X183.979 Y192.885 E.03325
G1 X182.691 Y194.174 E.09519
G1 X182.692 Y194.112 E.00324
G1 X182.628 Y193.871 E.01303
G1 X182.494 Y193.734 E.01
G1 X183.979 Y192.249 E.10972
G1 X183.979 Y191.613 E.03325
G1 X181.926 Y193.666 E.15168
G1 X181.824 Y193.663 E.00534
G1 X181.528 Y193.427 E.01975
G1 X183.979 Y190.976 E.18109
G1 X183.979 Y190.34 E.03325
G1 X181.293 Y193.026 E.19845
G1 X181.159 Y192.978 E.00741
G1 X180.711 Y192.971 E.02343
G1 X183.979 Y189.703 E.24146
G1 X183.979 Y189.067 E.03325
G1 X179.424 Y193.623 E.33658
G1 X178.798 Y193.612 E.0327
G1 X183.979 Y188.431 E.38282
G1 X183.979 Y187.794 E.03325
G1 X178.172 Y193.601 E.42905
G1 X177.546 Y193.591 E.0327
G1 X183.62 Y187.517 E.44873
G1 X183.381 Y187.279 E.01763
G1 X183.154 Y187.347 E.01239
G1 X176.077 Y194.423 E.52287
G1 X176.021 Y194.451 E.00327
G1 X176.021 Y193.843 E.03178
G1 X181.866 Y187.998 E.43186
G1 X180.706 Y188.748 E.07218
G1 X180.593 Y188.635 E.00836
G1 X176.021 Y193.207 E.33777
G1 X176.021 Y192.57 E.03325
G1 X180.274 Y188.317 E.31426
G1 X179.956 Y187.999 E.02351
G1 X176.021 Y191.934 E.29075
G1 X176.021 Y191.297 E.03325
G1 X179.935 Y187.383 E.28922
G3 X179.345 Y187.338 I-.12 J-2.304 E.03105
G1 X176.021 Y190.661 E.24556
G1 X176.021 Y190.025 E.03325
G1 X178.794 Y187.252 E.20485
G3 X178.316 Y187.093 I.541 J-2.427 E.02634
G1 X176.021 Y189.388 E.16955
G1 X176.021 Y188.752 E.03325
G1 X178.042 Y186.731 E.14929
;PATH_TASK id=1673 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X176 Y186.29 F24000
M204 P4000
;TYPE:Sparse infill
;WIDTH:0.45
G1 F6178.615
M106 S255
G1 X176 Y184.29 E.12112
G1 X176.359 Y184.649 E.03077
G3 X178.514 Y182.659 I2.394 J.432 E.19067
G1 X176 Y180.145 E.21538
G1 X176 Y178.145 E.12112
;PATH_TASK id=1674 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X179.48 Y174.374 F24000
;TYPE:Internal solid infill
;WIDTH:0.38292
;HEIGHT:0.2
G1 F6244
G1 X179.676 Y174.571 E.00787
;PATH_TASK id=1675 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X181.995 Y176.239 F24000
;WIDTH:0.449999
G1 F6244
G1 X182.103 Y175.983 E.00942
G1 X182.147 Y175.636 E.01184
G1 X182.12 Y175.31 E.01108
G1 X182.038 Y175.03 E.00988
G1 X181.799 Y174.718 E.01328
G1 X181.62 Y174.594 E.0074
G1 X181.346 Y174.501 E.00977
G1 X180.999 Y174.489 E.01178
G1 X180.772 Y174.555 E.008
G1 X180.514 Y174.759 E.01112
G1 X181.967 Y176.211 E.06953
;PATH_TASK id=1676 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X182.019 Y176.84 F24000
;WIDTH:0.449705
G1 F6244
G1 X182.311 Y176.53 E.01438
G1 X182.506 Y176.043 E.01774
G1 X182.553 Y175.603 E.01498
G1 X182.526 Y175.277 E.01108
G1 X182.405 Y174.843 E.01523
G1 X182.151 Y174.48 E.01499
G1 X181.895 Y174.269 E.01123
G1 X181.518 Y174.107 E.01388
G1 X181.021 Y174.066 E.01684
G1 X180.653 Y174.151 E.01278
G1 X180.291 Y174.397 E.01479
G1 X180.105 Y174.606 E.00947
G1 X179.959 Y174.659 E.00524
;PATH_TASK id=1677 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
;WIDTH:0.413253
G1 X179.704 Y174.599 E.00807
G1 X180.115 Y174.935 E.01633
;PATH_TASK id=1678 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
;WIDTH:0.449999
G1 X181.991 Y176.811 E.08982
;PATH_TASK id=1679 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X181.992 Y177.1 F24000
;WIDTH:0.45
G1 F6244
G1 X179.158 Y174.266 E.13565
G1 X179.011 Y174.234 E.00507
G1 X178.883 Y174.225 E.00435
G1 X178.752 Y174.229 E.00446
G1 X178.576 Y174.259 E.00604
G1 X181.442 Y177.126 E.13722
G1 X181.2 Y177.157 E.00825
G1 X181.018 Y177.154 E.00618
G1 X180.878 Y177.138 E.00477
G1 X178.183 Y174.442 E.12901
G1 X178.166 Y174.454 E.00068
G1 X177.98 Y174.626 E.00858
G1 X177.897 Y174.732 E.00457
G1 X179.663 Y176.498 E.08454
G1 X179.654 Y176.497 E.00028
G3 X179.365 Y176.776 I-1.1 J-.855 E.01364
G1 X177.714 Y175.124 E.07904
G1 X177.669 Y175.334 E.00725
G1 X177.653 Y175.64 E.01037
G1 X179.091 Y177.078 E.06884
;PATH_TASK id=1680 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X177.771 Y174.899 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.163426
G1 F6244
G1 X177.656 Y174.866 E.0012
G1 X177.658 Y174.729 E.00137
;PATH_TASK id=1681 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X178.717 Y177.116 F24000
;WIDTH:0.386436
G1 F6244
G3 X178.229 Y176.769 I4.552 J-6.911 E.01711
;PATH_TASK id=1682 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
;WIDTH:0.438116
G3 X177.825 Y176.363 I1.639 J-2.031 E.01885
;PATH_TASK id=1683 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
;WIDTH:0.414434
G1 X177.468 Y175.875 E.01866
;PATH_TASK id=1684 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X179.298 Y176.975 F24000
;WIDTH:0.109283
G1 F6244
G1 X179.12 Y177.074 E.00113
;PATH_TASK id=1685 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X180.707 Y177.309 F24000
;WIDTH:0.215333
G1 F6244
G1 X180.383 Y177.07 E.00579
;PATH_TASK id=1686 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
;WIDTH:0.25514
G3 X179.985 Y176.666 I1.524 J-1.898 E.01002
M73 P85 R6
G1 X179.937 Y176.624 E.00112
;PATH_TASK id=1687 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
;WIDTH:0.240467
G1 X179.796 Y176.697 E.00262
;PATH_TASK id=1688 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X184 Y173.71 F24000
M204 P4000
;TYPE:Sparse infill
;WIDTH:0.45
;HEIGHT:0.4
G1 F6178.615
G1 X184 Y175.71 E.12112
G1 X183.735 Y175.445 E.02271
G3 X182.272 Y178.082 I-2.663 J.247 E.19405
G1 X184 Y179.855 E.14995
G1 X184 Y184 E.25102
G1 X177.895 Y177.895 E.52294
G3 X176.712 Y176.712 I.891 J-2.074 E.10379
G1 X176 Y176 E.06098
G1 X176 Y171.855 E.25102
G1 X177.577 Y173.432 E.13507
G3 X179.788 Y173.246 I1.272 J1.887 E.14038
G3 X181.173 Y172.887 I1.37 J2.433 E.08764
G1 X180.124 Y171.834 E.09001
G2 X180.517 Y170.799 I-.493 J-.779 E.07191
G1 X182.716 Y170.836 E.13319
G2 X183.164 Y170.729 I-.258 J-2.075 E.02799
G1 X184 Y171.565 E.07162
G1 X184 Y167.42 E.25102
G1 X183.64 Y167.059 E.03091
G2 X183.788 Y165.112 I-2.587 J-1.177 E.12071
;PATH_TASK id=1689 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X184 Y161.275 F24000
G1 F6178.615
G1 X184 Y163.275 E.12112
G1 X181.835 Y161.11 E.18546
G2 X183.224 Y161.067 I.581 J-3.669 E.08464
G2 X183.708 Y160.711 I-1.05 J-1.935 E.0365
;PATH_TASK id=1690 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X181.791 Y159.101 F24000
;HEIGHT:0.2
G1 F6244
G1 X179.792 Y159.066 E.0677
G1 X178.784 Y158.058 E.04825
G1 X178.812 Y157.972 E.00308
G1 X179.073 Y158.036 E.0091
G2 X179.604 Y157.853 I.136 J-.468 E.02029
G1 X179.693 Y157.112 E.02526
G1 X179.516 Y156.889 E.00964
;PATH_TASK id=1691 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X182.78 Y157.816 F24000
;TYPE:Internal solid infill
;WIDTH:0.44597
G1 F6244
G2 X182.835 Y154.747 I-975.288 J-19.118 E.10287
G1 X182.435 Y154.715 E.01346
G1 X182.403 Y156.588 E.06277
G1 X182.274 Y156.775 E.00761
G1 X182.057 Y156.857 E.00779
G1 X181.859 Y156.818 E.00677
G2 X180.763 Y155.546 I-34.48 J28.608 E.05627
G1 X180.303 Y155.107 E.02129
G1 X180.001 Y154.891 E.01248
G1 X179.608 Y154.731 E.01419
G1 X179.132 Y154.69 E.01604
G1 X178.69 Y154.817 E.0154
G1 X178.36 Y155.071 E.01394
G1 X178.113 Y155.437 E.01481
;PATH_TASK id=1692 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
;WIDTH:0.415031
G1 X177.984 Y155.912 E.01524
G1 X177.985 Y156.423 E.0158
G1 X178.124 Y156.892 E.01514
G1 X178.276 Y157.142 E.00906
G1 X178.549 Y157.394 E.01148
;PATH_TASK id=1693 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
;WIDTH:0.44549
G1 X178.972 Y157.578 E.01545
G1 X179.221 Y157.631 E.00852
G1 X179.247 Y157.215 E.01397
G1 X178.962 Y157.143 E.00982
G1 X178.703 Y157.012 E.00973
G1 X178.444 Y156.7 E.01356
;PATH_TASK id=1694 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
;WIDTH:0.419728
G1 X178.33 Y156.301 E.01299
G1 X178.35 Y155.869 E.01356
G1 X178.51 Y155.499 E.01261
G1 X178.819 Y155.217 E.01312
;PATH_TASK id=1695 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
;WIDTH:0.445427
G1 X179.227 Y155.107 E.01413
G1 X179.625 Y155.173 E.01352
G1 X180.044 Y155.413 E.01616
G1 X180.456 Y155.793 E.01876
G3 X181.646 Y157.169 I-151.318 J131.996 E.06088
G1 X182.099 Y157.555 E.01991
G1 X182.51 Y157.766 E.01546
G1 X182.741 Y157.809 E.00787
;PATH_TASK id=1696 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X182.387 Y157.155 F24000
;WIDTH:0.49932
G1 F6244
G2 X182.387 Y157.254 I-.029 J.049 E.00907
G1 X182.396 Y157.239 E.00065
;PATH_TASK id=1697 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X184 Y153.957 F24000
;TYPE:Sparse infill
;WIDTH:0.45
;HEIGHT:0.4
G1 F6178.615
G1 X184 Y154.24 E.01712
G2 X182.553 Y153.538 I-1.185 J.602 E.10459
G1 X181.515 Y152.5 E.08896
G1 X177.37 Y152.5 E.25102
G1 X178.496 Y153.626 E.09648
G2 X176.803 Y156.061 I.839 J2.389 E.19187
G1 X176 Y155.274 E.06808
G1 X176 Y159.419 E.25102
G1 X176.99 Y160.41 E.08486
G3 X177.981 Y161.481 I-10.135 J10.371 E.08838
G2 X178.852 Y162.272 I1.113 J-.351 E.07467
G1 X179.771 Y163.191 E.07871
G2 X177.012 Y164.523 I-.14 J3.234 E.1933
G1 X176 Y163.564 E.08444
G1 X176 Y167.71 E.25102
G1 X176.747 Y168.457 E.06398
G2 X176.989 Y170.299 I1.33 J.762 E.12089
;PATH_TASK id=1698 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X179.335 Y170.824 F24000
;TYPE:Internal solid infill
;WIDTH:0.45006
;HEIGHT:0.2
G1 F6244
G1 X179.222 Y170.549 E.01006
G1 X178.95 Y170.068 E.01872
G1 X178.942 Y169.872 E.00663
G1 X179.042 Y169.697 E.00685
G1 X179.223 Y169.591 E.00707
G1 X182.37 Y169.645 E.10656
G1 X182.576 Y169.63 E.00701
G1 X182.583 Y169.235 E.01336
G3 X177.774 Y169.151 I19.121 J-1222.19 E.16284
G1 X177.765 Y169.396 E.00832
G1 X178.271 Y169.808 E.02209
G1 X178.627 Y170.28 E.02002
G1 X178.888 Y170.731 E.01763
G1 X178.965 Y170.831 E.00426
G1 X179.295 Y170.824 E.01116
;PATH_TASK id=1699 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X178.654 Y169.536 F24000
;WIDTH:0.46921
G1 F6244
G2 X178.661 Y169.617 I-.025 J.043 E.00764
;PATH_TASK id=1700 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X179.238 Y168.769 F24000
;TYPE:Sparse infill
;WIDTH:0.45
G1 F6244
G1 X181.238 Y168.803 E.0677
G1 X180.267 Y167.832 E.04646
G1 X179.452 Y167.777 E.02764
G1 X178.761 Y167.623 E.02399
G1 X178.83 Y167.67 E.00284
G1 X178.713 Y168.041 E.01317
;PATH_TASK id=1701 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X179.962 Y167.408 F24000
;TYPE:Internal solid infill
;WIDTH:0.449999
G1 F6244
G1 X180.799 Y167.409 E.0283
G1 X181.374 Y167.338 E.01962
G1 X181.893 Y167.177 E.01841
G1 X182.26 Y166.957 E.01448
G1 X182.509 Y166.686 E.01246
G1 X182.67 Y166.333 E.01311
G1 X182.726 Y165.91 E.01446
G1 X182.677 Y165.506 E.01377
G1 X182.527 Y165.168 E.01252
G1 X182.282 Y164.892 E.01251
G1 X181.962 Y164.679 E.01301
G1 X181.448 Y164.489 E.01853
G1 X180.916 Y164.397 E.01828
G1 X180.029 Y164.36 E.03004
G1 X179.365 Y164.408 E.02253
G1 X178.853 Y164.535 E.01787
G1 X178.405 Y164.749 E.01681
G1 X178.096 Y165.026 E.01403
G1 X177.928 Y165.304 E.01101
G1 X177.832 Y165.774 E.01621
G1 X177.861 Y166.204 E.01459
G2 X178.029 Y166.635 I1.701 J-.417 E.01571
G1 X178.313 Y166.933 E.01393
G1 X178.85 Y167.211 E.02048
G1 X179.36 Y167.344 E.01783
G1 X179.923 Y167.404 E.01916
;PATH_TASK id=1702 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X180.206 Y167.014 F24000
G1 F6244
G1 X180.846 Y167 E.02167
G1 X181.367 Y166.914 E.01785
G1 X181.842 Y166.733 E.0172
G1 X182.079 Y166.552 E.01012
G1 X182.222 Y166.334 E.00883
G1 X182.3 Y166.026 E.01075
G1 X182.294 Y165.734 E.00988
G1 X182.181 Y165.391 E.01224
G1 X181.888 Y165.119 E.01352
G1 X181.342 Y164.884 E.02012
G1 X180.802 Y164.8 E.01852
G1 X180.036 Y164.768 E.02595
G1 X179.429 Y164.812 E.02057
G1 X178.897 Y164.965 E.01874
G1 X178.538 Y165.177 E.01413
G1 X178.356 Y165.384 E.00933
G1 X178.243 Y165.688 E.01099
G1 X178.26 Y166.126 E.01483
G1 X178.367 Y166.399 E.00994
G1 X178.677 Y166.675 E.01404
G1 X179.022 Y166.839 E.01293
G1 X179.619 Y166.974 E.02069
G1 X180.166 Y167.012 E.01859
;PATH_TASK id=1703 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X180.011 Y166.595 F24000
G1 F6244
G1 X180.775 Y166.595 E.02586
G1 X181.259 Y166.521 E.01657
G1 X181.689 Y166.35 E.01569
G1 X181.822 Y166.23 E.00605
G1 X181.905 Y165.905 E.01135
G1 X181.834 Y165.614 E.01016
G1 X181.59 Y165.409 E.01077
G1 X181.166 Y165.267 E.01516
G1 X180.783 Y165.207 E.0131
G1 X180.001 Y165.178 E.02649
G1 X179.493 Y165.215 E.01723
G1 X179.029 Y165.353 E.0164
G1 X178.767 Y165.518 E.01046
G1 X178.662 Y165.702 E.00719
G1 X178.651 Y166.001 E.01013
G1 X178.737 Y166.197 E.00725
G1 X179.04 Y166.417 E.01268
G1 X179.491 Y166.541 E.01582
G1 X179.971 Y166.591 E.01633
;PATH_TASK id=1704 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X180.038 Y166.139 F24000
;WIDTH:0.537227
G1 F6244
G1 X180.761 Y166.146 E.02975
G1 X181.126 Y166.092 E.01516
G1 X181.443 Y165.974 E.0139
G1 X181.445 Y165.854 E.00494
G1 X181.089 Y165.709 E.01579
G1 X180.765 Y165.655 E.01353
G1 X180.049 Y165.633 E.02943
G1 X179.546 Y165.664 E.02072
G1 X179.107 Y165.815 E.01905
G1 X179.102 Y165.931 E.00479
G1 X179.473 Y166.083 E.01649
G1 X179.998 Y166.135 E.02166
;PATH_TASK id=1705 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X179.5 Y161.115 F24000
;WIDTH:0.450066
G1 F6244
G1 X179.388 Y160.84 E.01006
G1 X179.115 Y160.359 E.01872
G1 X179.107 Y160.163 E.00663
G1 X179.208 Y159.988 E.00685
G1 X179.388 Y159.882 E.00707
G1 X182.731 Y159.939 E.11319
G1 X182.748 Y159.527 E.01398
G3 X177.939 Y159.442 I19.121 J-1222.173 E.16284
G1 X177.93 Y159.688 E.00832
G1 X178.437 Y160.1 E.02209
G1 X178.793 Y160.572 E.02002
G1 X179.053 Y161.023 E.01763
G1 X179.13 Y161.122 E.00426
G1 X179.46 Y161.116 E.01116
;PATH_TASK id=1706 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X178.82 Y159.827 F24000
;WIDTH:0.469214
G1 F6244
G2 X178.826 Y159.908 I-.025 J.043 E.00764
;PATH_TASK id=1707 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X180.732 Y185.035 F24000
;WIDTH:0.513935
G1 F6244
G1 X180.537 Y185.117 E.00831
G1 X180.701 Y185.57 E.01884
G1 X181.036 Y185.46 E.01381
G1 X181.125 Y185.334 E.00602
G1 X181.131 Y185.189 E.0057
G1 X181.045 Y185.106 E.00468
G1 X180.771 Y185.043 E.01098
;PATH_TASK id=1708 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X180.634 Y184.606 F24000
;WIDTH:0.449999
G1 F6244
G1 X180.305 Y184.73 E.01189
G1 X180.135 Y184.932 E.00893
G1 X180.09 Y185.191 E.00891
G1 X180.325 Y185.851 E.02369
G1 X180.306 Y186.045 E.00659
G1 X180.862 Y185.989 E.01892
G1 X181.207 Y185.877 E.01228
G1 X181.445 Y185.665 E.01078
G1 X181.551 Y185.461 E.00777
G1 X181.568 Y185.149 E.01059
G1 X181.491 Y184.919 E.0082
G1 X181.307 Y184.741 E.00866
G1 X180.937 Y184.619 E.01318
G1 X180.674 Y184.608 E.00893
;PATH_TASK id=1709 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X180.604 Y184.193 F24000
G1 F6244
G1 X180.257 Y184.286 E.01215
G1 X179.945 Y184.513 E.01305
G1 X179.762 Y184.761 E.01045
G1 X179.686 Y185.11 E.0121
G1 X179.73 Y185.459 E.0119
G1 X179.923 Y185.915 E.01676
G1 X179.892 Y186.223 E.01049
G1 X179.765 Y186.44 E.00851
G1 X180.564 Y186.443 E.02705
G1 X181.093 Y186.348 E.0182
G1 X181.395 Y186.242 E.01085
G1 X181.651 Y186.062 E.0106
G1 X181.851 Y185.807 E.01094
G1 X181.967 Y185.421 E.01367
G1 X181.974 Y185.112 E.01043
G1 X181.889 Y184.785 E.01146
G1 X181.671 Y184.516 E.0117
G1 X181.392 Y184.334 E.01129
G1 X181.172 Y184.239 E.00813
G1 X180.644 Y184.196 E.01792
;PATH_TASK id=1710 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
G1 X180.375 Y183.833 F24000
;WIDTH:0.44308
G1 F6244
G1 X180.098 Y183.907 E.00954
G1 X179.807 Y184.079 E.01127
G1 X179.476 Y184.45 E.01652
G1 X179.336 Y184.758 E.01125
G1 X179.28 Y185.092 E.01128
G1 X179.308 Y185.428 E.01122
G2 X179.521 Y185.979 I3.26 J-.942 E.01968
G1 X179.486 Y186.129 E.0051
G1 X179.268 Y186.378 E.01103
G1 X179.141 Y186.384 E.00425
G1 X178.654 Y186.25 E.01679
G1 X178.207 Y185.982 E.01735
G1 X177.958 Y185.684 E.01292
;PATH_TASK id=1711 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
;WIDTH:0.406966
G1 X177.844 Y185.374 E.00998
G1 X177.842 Y185.011 E.01098
G1 X177.989 Y184.638 E.01216
;PATH_TASK id=1712 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
;WIDTH:0.448525
G1 X178.271 Y184.384 E.01279
G1 X178.588 Y184.241 E.01172
G1 X178.555 Y183.855 E.01309
G1 X178.252 Y183.942 E.01064
G1 X177.907 Y184.15 E.01359
G1 X177.667 Y184.43 E.01243
G1 X177.518 Y184.792 E.01321
;PATH_TASK id=1713 conformal=0 surface=-1 source_layer=6 shell_offset=-1.000000
;WIDTH:0.441423
G1 X177.473 Y185.235 E.01478
G1 X177.545 Y185.657 E.01419
G1 X177.743 Y186.044 E.01439
G1 X178.047 Y186.357 E.01446
G1 X178.507 Y186.61 E.01739
G1 X179.052 Y186.77 E.01881
G2 X180.641 Y186.848 I1.151 J-7.214 E.05282
M73 P85 R5
G1 X181.228 Y186.732 E.01983
G1 X181.584 Y186.607 E.01249
G1 X181.934 Y186.36 E.01422
G1 X182.207 Y186.013 E.01462
G1 X182.345 Y185.669 E.01226
G1 X182.383 Y185.118 E.01831
G1 X182.308 Y184.754 E.01233
G2 X182.072 Y184.322 I-1.822 J.715 E.01635
G1 X181.74 Y184.042 E.01439
G1 X181.281 Y183.843 E.01659
G1 X180.77 Y183.775 E.01709
G1 X180.415 Y183.827 E.01189
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:1.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;1.6
G1 E-.64 F2100
;WIPE_START
G1 F11292.28
G1 X180.77 Y183.775 E-.0574
G1 X181.281 Y183.843 E-.08254
G1 X181.396 Y183.893 E-.02006
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;1.6
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=1714 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
M486 S0
G1 X184.346 Y204.983 Z1.6 F24000
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F3953
G1 X175.654 Y204.983 E.29424
G1 X175.654 Y152.154 E1.78821
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y204.943 E1.78685
;PATH_TASK id=1715 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
M204 T2500
G1 X184.389 Y204.943 F24000
G1 X184.389 Y205.026
G1 X184.389 Y205.026
G1 X184.775 Y205.411
M204 P2500
;TYPE:Outer wall
G1 F3953
G1 X175.225 Y205.411 E.32326
G1 X175.225 Y151.725 E1.81722
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y205.371 E1.81586
;PATH_TASK id=1716 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X183.775 Y205.376 E-.16
;WIPE_END
G1 X183.775 Y205.026 F24000
G1 X184.389 Y205.026
G1 X184.389 Y204.048
G1 X184.185 Y204.048
G1 E.8 F1800
M204 P1500
;TYPE:Top surface
;WIDTH:0.425261
G1 F3953
G1 X183.412 Y204.822 E.03477
;PATH_TASK id=1717 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X182.871 Y204.822 F24000
G1 F3953
G1 X184.185 Y203.507 E.05908
;PATH_TASK id=1718 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X184.185 Y202.967 F24000
G1 F3953
G1 X182.33 Y204.822 E.08339
;PATH_TASK id=1719 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X181.79 Y204.822 F24000
G1 F3953
G1 X184.185 Y202.426 E.10771
;PATH_TASK id=1720 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X184.185 Y201.885 F24000
G1 F3953
G1 X181.249 Y204.822 E.13202
;PATH_TASK id=1721 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X180.708 Y204.822 F24000
G1 F3953
G1 X184.185 Y201.345 E.15633
;PATH_TASK id=1722 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X184.185 Y200.804 F24000
G1 F3953
G1 X180.167 Y204.822 E.18064
;PATH_TASK id=1723 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X179.627 Y204.822 F24000
G1 F3953
G1 X184.185 Y200.263 E.20495
;PATH_TASK id=1724 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X184.185 Y199.722 F24000
G1 F3953
G1 X179.086 Y204.822 E.22926
;PATH_TASK id=1725 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X178.545 Y204.822 F24000
G1 F3953
G1 X184.185 Y199.182 E.25357
;PATH_TASK id=1726 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X184.185 Y198.641 F24000
G1 F3953
G1 X178.005 Y204.822 E.27788
;PATH_TASK id=1727 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X177.464 Y204.822 F24000
G1 F3953
G1 X184.185 Y198.1 E.30219
;PATH_TASK id=1728 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X184.185 Y197.56 F24000
G1 F3953
G1 X176.923 Y204.822 E.3265
;PATH_TASK id=1729 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X176.382 Y204.822 F24000
G1 F3953
G1 X184.185 Y197.019 E.35081
;PATH_TASK id=1730 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X184.158 Y196.505 F24000
G1 F3953
G1 X175.842 Y204.822 E.37391
;PATH_TASK id=1731 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X175.815 Y204.308 F24000
G1 F3953
G1 X183.617 Y196.505 E.35081
;PATH_TASK id=1732 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X183.077 Y196.505 F24000
G1 F3953
G1 X175.815 Y203.767 E.3265
;PATH_TASK id=1733 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X175.815 Y203.226 F24000
G1 F3953
G1 X182.536 Y196.505 E.30219
;PATH_TASK id=1734 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X181.995 Y196.505 F24000
G1 F3953
G1 X175.815 Y202.686 E.27787
;PATH_TASK id=1735 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X175.815 Y202.145 F24000
G1 F3953
G1 X181.455 Y196.505 E.25356
;PATH_TASK id=1736 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X180.914 Y196.505 F24000
G1 F3953
G1 X175.815 Y201.604 E.22925
;PATH_TASK id=1737 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X175.815 Y201.063 F24000
G1 F3953
G1 X180.373 Y196.505 E.20494
;PATH_TASK id=1738 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X179.832 Y196.505 F24000
G1 F3953
G1 X175.815 Y200.523 E.18063
;PATH_TASK id=1739 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X175.815 Y199.982 F24000
G1 F3953
G1 X179.292 Y196.505 E.15632
;PATH_TASK id=1740 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X178.751 Y196.505 F24000
G1 F3953
G1 X175.815 Y199.441 E.13201
;PATH_TASK id=1741 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X175.815 Y198.901 F24000
G1 F3953
G1 X178.21 Y196.505 E.1077
;PATH_TASK id=1742 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X177.67 Y196.505 F24000
G1 F3953
G1 X175.815 Y198.36 E.08339
;PATH_TASK id=1743 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X175.815 Y197.819 F24000
G1 F3953
G1 X177.129 Y196.505 E.05908
;PATH_TASK id=1744 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X176.588 Y196.505 F24000
G1 F3953
G1 X175.815 Y197.278 E.03477
;PATH_TASK id=1745 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X183.868 Y195.273 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.592589
G1 F3953
G1 X182.93 Y196.211 E.06065
G1 X183.868 Y196.211 E.04289
G1 X183.868 Y195.313 E.04106
;PATH_TASK id=1746 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X184.184 Y194.569 F24000
;WIDTH:0.449999
G1 F3953
G1 X182.47 Y196.283 E.08204
G1 X181.894 Y196.283 E.01949
G1 X184 Y194.176 E.10083
G1 X184 Y193.601 E.01949
G1 X181.318 Y196.283 E.12839
G1 X180.743 Y196.283 E.01949
G1 X184 Y193.025 E.15595
G1 X184 Y192.449 E.01949
G1 X180.167 Y196.283 E.18351
G1 X179.591 Y196.283 E.01949
G1 X184 Y191.873 E.21107
G1 X184 Y191.298 E.01949
G1 X179.016 Y196.283 E.23862
G1 X178.44 Y196.283 E.01949
G1 X184 Y190.722 E.26618
G1 X184 Y190.146 E.01949
G1 X177.864 Y196.283 E.29374
G1 X177.288 Y196.283 E.01949
G1 X184 Y189.571 E.3213
G1 X184 Y188.995 E.01949
G1 X176.713 Y196.283 E.34886
G1 X176.137 Y196.283 E.01949
G1 X184 Y188.419 E.37642
G1 X184 Y187.844 E.01949
G1 X176 Y195.845 E.383
G1 X176 Y195.269 E.01949
G1 X183.749 Y187.519 E.37098
G1 X183.174 Y187.519 E.01949
G1 X176 Y194.693 E.34343
G1 X176 Y194.117 E.01949
G1 X182.598 Y187.519 E.31587
G1 X182.022 Y187.519 E.01949
G1 X176 Y193.542 E.28831
G1 X176 Y192.966 E.01949
G1 X181.447 Y187.519 E.26075
G1 X180.871 Y187.519 E.01949
G1 X176 Y192.39 E.23319
G1 X176 Y191.815 E.01949
G1 X180.295 Y187.519 E.20564
G1 X179.72 Y187.519 E.01949
G1 X176 Y191.239 E.17808
G1 X176 Y190.663 E.01949
G1 X179.144 Y187.519 E.15052
G1 X178.568 Y187.519 E.01949
G1 X176 Y190.088 E.12296
G1 X176 Y189.512 E.01949
G1 X177.993 Y187.519 E.0954
G1 X177.417 Y187.519 E.01949
G1 X176 Y188.936 E.06784
G1 X176 Y188.36 E.01949
G1 X177.024 Y187.336 E.04905
;PATH_TASK id=1747 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X176.469 Y187.315 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.449969
G1 F3953
G1 X175.857 Y187.927 E.02929
;PATH_TASK id=1748 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X176.056 Y187.448 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.42715
G1 F3953
G1 X176.043 Y187.382 E.00216
;PATH_TASK id=1749 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
;WIDTH:0.389626
G1 X176.03 Y187.315 E.00195
G1 X176.03 Y184.873 E.07042
;PATH_TASK id=1750 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X178.677 Y184.138 F24000
;TYPE:Sparse infill
;WIDTH:0.45
G1 F3953
G1 X177.263 Y185.553 E.0677
G1 X178.822 Y187.112 E.07464
G1 X182.967 Y187.112 E.1403
G1 X181.244 Y185.389 E.08246
G1 X182.658 Y183.975 E.0677
;PATH_TASK id=1751 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X183.97 Y187.227 F24000
;TYPE:Internal solid infill
;WIDTH:0.38894
G1 F3953
G1 X183.97 Y183.588 E.1047
;PATH_TASK id=1752 conformal=0 surface=-1 source_layer=7 shell_offset=-1.000000
G1 X176.731 Y187.308 F24000
G1 F3953
G1 X176.666 Y187.345 E.00216
G1 X176.733 Y187.38 E.00216
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:1.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;1.8
G1 E-.77377 F2100
;WIPE_START
G1 F12000
G1 X176.666 Y187.345 E-.01312
G1 X176.731 Y187.308 E-.01311
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;1.8
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=1753 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
M486 S0
G1 X184.346 Y197.302 Z1.8 F24000
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F3790
G1 X175.654 Y197.302 E.29424
G1 X175.654 Y152.154 E1.52823
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y197.262 E1.52688
;PATH_TASK id=1754 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
M204 T2500
G1 X184.389 Y197.262 F24000
G1 X184.389 Y197.345
G1 X184.389 Y197.345
G1 X184.775 Y197.731
M204 P2500
;TYPE:Outer wall
G1 F3790
G1 X175.225 Y197.731 E.32326
G1 X175.225 Y151.725 E1.55724
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y197.691 E1.55589
;PATH_TASK id=1755 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X183.775 Y197.695 E-.16
;WIPE_END
G1 X183.775 Y196.916 F24000
G1 X183.96 Y196.916
G1 X183.96 Y193.87
G1 X183.409 Y193.87
G1 X183.409 Y193.645
G1 E.8 F1800
M204 P1500
;TYPE:Top surface
;WIDTH:0.42674
G1 F3790
G1 X184.185 Y194.422 E.03505
;PATH_TASK id=1756 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X184.185 Y194.964 F24000
G1 F3790
G1 X182.866 Y193.645 E.05955
;PATH_TASK id=1757 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X182.323 Y193.645 F24000
G1 F3790
G1 X184.185 Y195.507 E.08405
;PATH_TASK id=1758 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X184.185 Y196.05 F24000
G1 F3790
G1 X181.78 Y193.645 E.10855
;PATH_TASK id=1759 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X181.237 Y193.645 F24000
G1 F3790
G1 X184.185 Y196.593 E.13305
;PATH_TASK id=1760 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X184.185 Y197.136 F24000
G1 F3790
G1 X180.695 Y193.645 E.15755
;PATH_TASK id=1761 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X180.152 Y193.645 F24000
G1 F3790
G1 X183.648 Y197.141 E.15779
;PATH_TASK id=1762 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X183.105 Y197.141 F24000
G1 F3790
G1 X179.609 Y193.645 E.15779
;PATH_TASK id=1763 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X179.066 Y193.645 F24000
G1 F3790
G1 X182.562 Y197.141 E.15779
;PATH_TASK id=1764 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X182.019 Y197.141 F24000
G1 F3790
G1 X178.523 Y193.645 E.15779
;PATH_TASK id=1765 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X177.981 Y193.645 F24000
G1 F3790
G1 X181.477 Y197.141 E.15779
;PATH_TASK id=1766 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X180.934 Y197.141 F24000
G1 F3790
G1 X177.438 Y193.645 E.15779
;PATH_TASK id=1767 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X176.895 Y193.645 F24000
G1 F3790
G1 X180.391 Y197.141 E.15779
;PATH_TASK id=1768 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X179.848 Y197.141 F24000
G1 F3790
G1 X176.352 Y193.645 E.15779
;PATH_TASK id=1769 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X175.815 Y193.651 F24000
G1 F3790
G1 X179.305 Y197.141 E.15754
;PATH_TASK id=1770 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X178.763 Y197.141 F24000
G1 F3790
G1 X175.815 Y194.193 E.13304
;PATH_TASK id=1771 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X175.815 Y194.736 F24000
G1 F3790
G1 X178.22 Y197.141 E.10854
;PATH_TASK id=1772 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X177.677 Y197.141 F24000
G1 F3790
G1 X175.815 Y195.279 E.08404
;PATH_TASK id=1773 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X175.815 Y195.822 F24000
G1 F3790
G1 X177.134 Y197.141 E.05954
;PATH_TASK id=1774 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X176.591 Y197.141 F24000
G1 F3790
G1 X175.815 Y196.365 E.03504
;PATH_TASK id=1775 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 E-.64 F2100
M73 P86 R5
;WIPE_START
G1 F6000
G1 X176.522 Y197.072 E-.16
;WIPE_END
G1 X176.122 Y193.34 F24000
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.513006
G1 F3790
G2 X176.122 Y193.442 I-.029 J.051 E.00962
G1 X176.131 Y193.426 E.00073
;PATH_TASK id=1776 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X182.453 Y188.194 F24000
;WIDTH:0.449999
G1 F3790
G1 X183.939 Y189.68 E.07113
G1 X183.939 Y188.339 E.04538
G1 X183.794 Y188.194 E.00695
G1 X182.493 Y188.194 E.04403
;PATH_TASK id=1777 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X183.533 Y188.579 F24000
;WIDTH:0.506296
G1 F3790
G2 X183.533 Y188.679 I-.029 J.05 E.00935
G1 X183.542 Y188.664 E.00069
;PATH_TASK id=1778 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X184.184 Y190.212 F24000
;WIDTH:0.449999
G1 F3790
G1 X182.166 Y188.194 E.09661
G1 X181.59 Y188.194 E.01949
G1 X184 Y190.605 E.11539
G1 X184 Y191.18 E.01949
G1 X181.014 Y188.194 E.14295
G1 X180.438 Y188.194 E.01949
G1 X184 Y191.756 E.17051
G1 X184 Y192.332 E.01949
G1 X179.863 Y188.194 E.19807
G1 X179.287 Y188.194 E.01949
G1 X184 Y192.907 E.22563
G1 X184 Y193.423 E.01744
G1 X183.94 Y193.423 E.00205
G1 X178.711 Y188.194 E.25029
G1 X178.136 Y188.194 E.01949
G1 X183.364 Y193.423 E.25029
G1 X182.789 Y193.423 E.01949
G1 X177.56 Y188.194 E.25029
G1 X176.984 Y188.194 E.01949
G1 X182.213 Y193.423 E.25029
G1 X181.637 Y193.423 E.01949
G1 X176.409 Y188.194 E.25029
G1 X176.206 Y188.194 E.00686
G1 X176.019 Y188.38 E.00893
G1 X181.062 Y193.423 E.24137
G1 X180.486 Y193.423 E.01949
G1 X176 Y188.936 E.21476
G1 X176 Y189.512 E.01949
G1 X179.91 Y193.423 E.1872
G1 X179.334 Y193.423 E.01949
G1 X176 Y190.088 E.15964
G1 X176 Y190.663 E.01949
G1 X178.759 Y193.423 E.13208
G1 X178.183 Y193.423 E.01949
G1 X176 Y191.239 E.10452
G1 X176 Y191.815 E.01949
G1 X177.607 Y193.423 E.07696
G1 X177.032 Y193.423 E.01949
G1 X175.816 Y192.207 E.05818
;PATH_TASK id=1779 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X176.66 Y193.626 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.449968
G1 F3790
G1 X175.857 Y192.824 E.03841
;PATH_TASK id=1780 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X184.181 Y186.955 F24000
M204 P1500
;TYPE:Internal Bridge
;WIDTH:0.4
;HEIGHT:0.4
G1 F3790
G1 X183.371 Y187.765 E.05985
G1 X182.735 Y187.765 E.03325
G1 X183.979 Y186.521 E.09191
G1 X183.979 Y185.885 E.03325
G1 X182.099 Y187.765 E.13893
G1 X181.462 Y187.765 E.03325
G1 X183.979 Y185.249 E.18595
G1 X183.979 Y184.612 E.03325
G1 X180.826 Y187.765 E.23297
G1 X180.19 Y187.765 E.03325
G1 X183.979 Y183.976 E.27999
G1 X183.979 Y183.602 E.01955
G1 X183.826 Y183.579 E.00806
G1 X183.783 Y183.535 E.0032
G1 X179.553 Y187.765 E.31253
G1 X178.917 Y187.765 E.03325
G1 X183.465 Y183.217 E.33604
G1 X183.147 Y182.899 E.02351
G1 X178.28 Y187.765 E.35955
G1 X177.644 Y187.765 E.03325
G1 X180.756 Y184.653 E.22993
G1 X180.438 Y184.335 E.02351
G1 X177.008 Y187.765 E.25344
G1 X176.371 Y187.765 E.03325
G1 X180.119 Y184.017 E.27695
G1 X179.801 Y183.699 E.02351
G1 X176.021 Y187.479 E.27931
G1 X176.021 Y186.843 E.03325
G1 X179.483 Y183.381 E.2558
G1 X179.165 Y183.062 E.02351
G1 X176.021 Y186.206 E.23229
G1 X176.021 Y185.57 E.03325
G1 X176.774 Y184.817 E.05565
G1 X176.456 Y184.499 E.02351
G1 X175.819 Y185.136 E.0471
;PATH_TASK id=1781 conformal=0 surface=-1 source_layer=8 shell_offset=-1.000000
G1 X176 Y182.145 F24000
M204 P4000
;TYPE:Sparse infill
;WIDTH:0.45
G1 F3790
M106 S255
G1 X176 Y180.145 E.12112
G1 X178.729 Y182.874 E.23376
G1 X179.156 Y182.447 E.03655
G1 X181.065 Y184.356 E.16351
G1 X182.711 Y182.711 E.14095
G1 X176 Y176 E.57477
G1 X176 Y171.855 E.25102
G1 X184 Y179.855 E.68523
G1 X184 Y175.71 E.25102
G1 X176 Y167.71 E.68523
G1 X176 Y163.564 E.25102
G1 X184 Y171.565 E.68523
G1 X184 Y167.42 E.25102
G1 X176 Y159.419 E.68523
G1 X176 Y155.274 E.25102
G1 X184 Y163.275 E.68523
G1 X184 Y159.13 E.25102
G1 X177.37 Y152.5 E.56789
G1 X181.515 Y152.5 E.25102
G1 X184 Y154.985 E.21289
G1 X184 Y152.985 E.12112
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;2
G1 E-.64 F2100
;WIPE_START
G1 F6178.615
G1 X184 Y153.985 E-.16
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;2
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=1782 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
M486 S0
G1 X184.346 Y194.442 Z2 F24000
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F2909
G1 X175.654 Y194.442 E.29424
G1 X175.654 Y152.154 E1.43142
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y194.402 E1.43006
;PATH_TASK id=1783 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
M204 T2500
G1 X184.389 Y194.402 F24000
G1 X184.389 Y194.485
G1 X184.775 Y194.871
M204 P2500
;TYPE:Outer wall
G1 F2909
G1 X175.225 Y194.871 E.32326
G1 X175.225 Y151.725 E1.46043
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y194.831 E1.45907
;PATH_TASK id=1784 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X183.775 Y194.835 E-.16
;WIPE_END
G1 X183.775 Y194.485 F24000
G1 X183.398 Y194.485
G1 X183.398 Y194.281
G1 E.8 F1800
M204 P1500
;TYPE:Top surface
;WIDTH:0.431911
G1 F2909
G1 X184.185 Y193.493 E.03602
;PATH_TASK id=1785 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X184.185 Y192.943 F24000
G1 F2909
G1 X182.847 Y194.281 E.06119
;PATH_TASK id=1786 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X182.297 Y194.281 F24000
G1 F2909
G1 X184.185 Y192.393 E.08635
;PATH_TASK id=1787 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X184.185 Y191.843 F24000
G1 F2909
G1 X181.747 Y194.281 E.11151
;PATH_TASK id=1788 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X181.197 Y194.281 F24000
G1 F2909
G1 X184.185 Y191.293 E.13668
;PATH_TASK id=1789 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X184.185 Y190.743 F24000
G1 F2909
G1 X180.647 Y194.281 E.16184
;PATH_TASK id=1790 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X180.097 Y194.281 F24000
G1 F2909
G1 X184.185 Y190.193 E.18701
;PATH_TASK id=1791 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X184.185 Y189.642 F24000
G1 F2909
G1 X179.547 Y194.281 E.21217
;PATH_TASK id=1792 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X178.997 Y194.281 F24000
G1 F2909
G1 X184.185 Y189.092 E.23733
;PATH_TASK id=1793 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X184.185 Y188.542 F24000
G1 F2909
G1 X178.447 Y194.281 E.2625
;PATH_TASK id=1794 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X177.896 Y194.281 F24000
G1 F2909
G1 X184.185 Y187.992 E.28766
;PATH_TASK id=1795 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X183.754 Y187.873 F24000
G1 F2909
G1 X177.346 Y194.281 E.29309
;PATH_TASK id=1796 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X176.796 Y194.281 F24000
G1 F2909
G1 X183.204 Y187.873 E.29309
;PATH_TASK id=1797 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X182.654 Y187.873 F24000
G1 F2909
G1 X176.246 Y194.281 E.29309
;PATH_TASK id=1798 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X175.815 Y194.162 F24000
G1 F2909
G1 X182.103 Y187.873 E.28766
;PATH_TASK id=1799 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X181.553 Y187.873 F24000
G1 F2909
G1 X175.815 Y193.612 E.26249
;PATH_TASK id=1800 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X175.815 Y193.062 F24000
G1 F2909
G1 X181.003 Y187.873 E.23733
;PATH_TASK id=1801 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X180.453 Y187.873 F24000
G1 F2909
G1 X175.815 Y192.512 E.21216
;PATH_TASK id=1802 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X175.815 Y191.961 F24000
G1 F2909
G1 X179.903 Y187.873 E.187
;PATH_TASK id=1803 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X179.353 Y187.873 F24000
G1 F2909
G1 X175.815 Y191.411 E.16184
;PATH_TASK id=1804 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X175.815 Y190.861 F24000
G1 F2909
G1 X178.803 Y187.873 E.13667
;PATH_TASK id=1805 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X178.253 Y187.873 F24000
G1 F2909
G1 X175.815 Y190.311 E.11151
;PATH_TASK id=1806 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X175.815 Y189.761 F24000
G1 F2909
G1 X177.703 Y187.873 E.08635
;PATH_TASK id=1807 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X177.152 Y187.873 F24000
G1 F2909
G1 X175.815 Y189.211 E.06118
;PATH_TASK id=1808 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X175.815 Y188.661 F24000
G1 F2909
G1 X176.602 Y187.873 E.03602
;PATH_TASK id=1809 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X183.939 Y186.317 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.449999
G1 F2909
G1 X182.605 Y187.651 E.06385
G1 X183.939 Y187.651 E.04515
G1 X183.939 Y186.357 E.0438
;PATH_TASK id=1810 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X183.572 Y187.22 F24000
;WIDTH:0.417236
G1 F2909
G1 X183.502 Y187.26 E.00252
G1 X183.575 Y187.295 E.00253
;PATH_TASK id=1811 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X182.134 Y187.834 F24000
;WIDTH:0.45
G1 F2909
G1 X184 Y185.968 E.08933
G1 X184 Y185.392 E.01949
G1 X181.742 Y187.651 E.10812
G1 X181.166 Y187.651 E.01949
G1 X184 Y184.817 E.13568
G1 X184 Y184.241 E.01949
G1 X180.59 Y187.651 E.16323
G1 X180.015 Y187.651 E.01949
G1 X183.953 Y183.713 E.1885
G1 X183.377 Y183.713 E.01949
G1 X179.439 Y187.651 E.1885
G1 X178.863 Y187.651 E.01949
G1 X182.801 Y183.713 E.1885
G1 X182.225 Y183.713 E.01949
G1 X178.288 Y187.651 E.1885
G1 X177.712 Y187.651 E.01949
G1 X181.65 Y183.713 E.1885
G1 X181.074 Y183.713 E.01949
G1 X177.136 Y187.651 E.1885
G1 X176.561 Y187.651 E.01949
G1 X180.498 Y183.713 E.1885
G1 X179.923 Y183.713 E.01949
G1 X176 Y187.636 E.1878
G1 X176 Y187.061 E.01949
G1 X179.347 Y183.713 E.16024
G1 X178.771 Y183.713 E.01949
G1 X176 Y186.485 E.13268
G1 X176 Y185.909 E.01949
G1 X178.196 Y183.713 E.10512
G1 X177.62 Y183.713 E.01949
G1 X176 Y185.333 E.07756
G1 X176 Y184.758 E.01949
G1 X177.227 Y183.53 E.05878
;PATH_TASK id=1812 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X176.672 Y183.51 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.449951
G1 F2909
G1 X175.857 Y184.325 E.03901
;PATH_TASK id=1813 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X176.102 Y183.733 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.509075
G1 F2909
G1 X176.078 Y183.659 E.00303
;PATH_TASK id=1814 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
;WIDTH:0.46102
G1 X176.054 Y183.584 E.00272
;PATH_TASK id=1815 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
;WIDTH:0.389662
G1 X176.03 Y183.51 E.00226
G1 X176.03 Y178.391 E.14756
;PATH_TASK id=1816 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X176.407 Y182.552 F24000
;TYPE:Sparse infill
;WIDTH:0.45
G1 F2909
G1 X176.407 Y180.552 E.0677
G1 X179.161 Y183.306 E.13185
G1 X183.306 Y183.306 E.1403
G1 X178.803 Y178.803 E.21554
G1 X180.697 Y176.91 E.09063
G1 X182.672 Y178.885 E.09455
G1 X182.892 Y178.747 E.0088
G1 X183.593 Y179.448 E.03358
G1 X183.593 Y181.448 E.0677
;PATH_TASK id=1817 conformal=0 surface=-1 source_layer=9 shell_offset=-1.000000
G1 X183.97 Y183.472 F24000
;TYPE:Internal solid infill
;WIDTH:0.38894
G1 F2909
G1 X183.97 Y177.539 E.1707
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:2.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;2.2
G1 E-.64 F2100
;WIPE_START
G1 F12000
G1 X183.97 Y178.539 E-.16
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;2.2
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=1818 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
M486 S0
G1 X184.346 Y188.671 Z2.2 F24000
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F3091
G1 X175.654 Y188.671 E.29424
G1 X175.654 Y152.154 E1.23605
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y188.631 E1.2347
;PATH_TASK id=1819 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
M204 T2500
G1 X184.389 Y188.631 F24000
G1 X184.389 Y188.713
G1 X184.389 Y188.713
G1 X184.775 Y189.099
M204 P2500
;TYPE:Outer wall
G1 F3091
G1 X175.225 Y189.099 E.32326
G1 X175.225 Y151.725 E1.26507
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y189.059 E1.26371
;PATH_TASK id=1820 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X183.775 Y189.063 E-.16
;WIPE_END
G1 X183.775 Y188.284 F24000
G1 X183.96 Y188.284
G1 X183.96 Y186.196
G1 X183.399 Y186.196
G1 X183.399 Y185.97
G1 E.8 F1800
M204 P1500
;TYPE:Top surface
;WIDTH:0.431278
G1 F3091
G1 X184.185 Y186.757 E.0359
;PATH_TASK id=1821 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
G1 X184.185 Y187.306 F24000
G1 F3091
G1 X182.85 Y185.97 E.06099
;PATH_TASK id=1822 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
G1 X182.301 Y185.97 F24000
G1 F3091
G1 X184.185 Y187.855 E.08607
;PATH_TASK id=1823 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
G1 X184.185 Y188.404 F24000
G1 F3091
G1 X181.751 Y185.97 E.11115
;PATH_TASK id=1824 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
G1 X181.202 Y185.97 F24000
G1 F3091
G1 X183.741 Y188.509 E.11594
;PATH_TASK id=1825 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
G1 X183.192 Y188.509 F24000
G1 F3091
G1 X180.653 Y185.97 E.11594
;PATH_TASK id=1826 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
G1 X180.104 Y185.97 F24000
G1 F3091
G1 X182.642 Y188.509 E.11594
;PATH_TASK id=1827 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
G1 X182.093 Y188.509 F24000
G1 F3091
G1 X179.554 Y185.97 E.11594
;PATH_TASK id=1828 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
G1 X179.005 Y185.97 F24000
G1 F3091
G1 X181.544 Y188.509 E.11594
;PATH_TASK id=1829 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
G1 X180.995 Y188.509 F24000
G1 F3091
G1 X178.456 Y185.97 E.11594
;PATH_TASK id=1830 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
G1 X177.907 Y185.97 F24000
G1 F3091
G1 X180.445 Y188.509 E.11594
;PATH_TASK id=1831 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
G1 X179.896 Y188.509 F24000
G1 F3091
G1 X177.358 Y185.97 E.11594
;PATH_TASK id=1832 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
G1 X176.808 Y185.97 F24000
M73 P87 R5
G1 F3091
G1 X179.347 Y188.509 E.11594
;PATH_TASK id=1833 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
G1 X178.798 Y188.509 F24000
G1 F3091
G1 X176.259 Y185.97 E.11594
;PATH_TASK id=1834 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
G1 X175.815 Y186.075 F24000
G1 F3091
G1 X178.249 Y188.509 E.11114
;PATH_TASK id=1835 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
G1 X177.699 Y188.509 F24000
G1 F3091
G1 X175.815 Y186.625 E.08606
;PATH_TASK id=1836 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
G1 X175.815 Y187.174 F24000
G1 F3091
G1 X177.15 Y188.509 E.06098
;PATH_TASK id=1837 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
G1 X176.601 Y188.509 F24000
G1 F3091
G1 X175.815 Y187.723 E.0359
;PATH_TASK id=1838 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F6000
G1 X176.522 Y188.43 E-.16
;WIPE_END
G1 X176.206 Y184.388 F24000
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.449999
G1 F3091
G1 X176.061 Y184.533 E.00695
G1 X176.061 Y185.748 E.04112
G1 X183.939 Y185.748 E.26669
G1 X183.939 Y184.533 E.04112
G1 X183.794 Y184.388 E.00695
G1 X176.246 Y184.388 E.2555
;PATH_TASK id=1839 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
G1 X176.502 Y184.83 F24000
;WIDTH:0.519343
G1 F3091
G1 X176.502 Y185.306 E.01887
G1 X183.498 Y185.306 E.27712
G1 X183.498 Y184.83 E.01887
G1 X176.542 Y184.83 E.27553
;PATH_TASK id=1840 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
G1 X178.339 Y177.485 F24000
;TYPE:Sparse infill
;WIDTH:0.45
;HEIGHT:0.4
G1 F3091
G1 X177.351 Y176.498 E.08457
G1 X176.925 Y176.925 E.03655
G1 X176 Y176 E.07922
G1 X176 Y171.855 E.25102
G1 X180.27 Y176.125 E.36573
G1 X180.697 Y175.698 E.03655
G1 X181.684 Y176.685 E.08457
;PATH_TASK id=1841 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
G1 X184.181 Y183.137 F24000
M204 P1500
;TYPE:Internal Bridge
;WIDTH:0.4
G1 F3091
G1 X183.359 Y183.96 E.06078
G1 X182.722 Y183.96 E.03325
G1 X183.979 Y182.703 E.09284
G1 X183.979 Y182.067 E.03325
G1 X182.086 Y183.96 E.13986
G1 X181.45 Y183.96 E.03325
G1 X183.979 Y181.43 E.18688
G1 X183.979 Y180.794 E.03325
G1 X180.813 Y183.96 E.2339
G1 X180.177 Y183.96 E.03325
G1 X183.979 Y180.158 E.28092
G1 X183.979 Y179.521 E.03325
G1 X179.54 Y183.96 E.32794
G1 X178.904 Y183.96 E.03325
G1 X183.979 Y178.885 E.37496
G1 X183.979 Y178.248 E.03325
G1 X178.268 Y183.96 E.42198
G1 X177.631 Y183.96 E.03325
G1 X183.979 Y177.612 E.469
G1 X183.979 Y177.555 E.00299
G1 X182.733 Y178.34 E.07696
G1 X182.674 Y178.281 E.00439
G1 X176.995 Y183.96 E.41957
G1 X176.359 Y183.96 E.03325
G1 X182.355 Y177.963 E.44308
G1 X182.037 Y177.645 E.02351
G1 X176.021 Y183.661 E.4445
G1 X176.021 Y183.024 E.03325
G1 X181.719 Y177.326 E.42099
G1 X181.401 Y177.008 E.02351
G1 X176.021 Y182.388 E.39748
G1 X176.021 Y181.752 E.03325
G1 X181.083 Y176.69 E.37397
G1 X180.764 Y176.372 E.02351
G1 X176.021 Y181.115 E.35046
G1 X176.021 Y180.479 E.03325
G1 X178.374 Y178.126 E.17382
G1 X178.055 Y177.808 E.02351
G1 X176.021 Y179.842 E.15031
G1 X176.021 Y179.206 E.03325
G1 X177.737 Y177.49 E.1268
G1 X177.419 Y177.172 E.02351
G1 X175.819 Y178.772 E.11825
;PATH_TASK id=1842 conformal=0 surface=-1 source_layer=10 shell_offset=-1.000000
G1 X176 Y165.71 F24000
M204 P4000
;TYPE:Sparse infill
;WIDTH:0.45
G1 F3091
M106 S255
G1 X176 Y167.71 E.12112
G1 X184 Y175.71 E.68523
G1 X184 Y171.565 E.25102
G1 X176 Y163.564 E.68523
G1 X176 Y159.419 E.25102
G1 X184 Y167.42 E.68523
G1 X184 Y163.275 E.25102
G1 X176 Y155.274 E.68523
G1 X176 Y152.5 E.16805
G1 X177.37 Y152.5 E.08297
G1 X184 Y159.13 E.56789
G1 X184 Y154.985 E.25102
G1 X181.515 Y152.5 E.21289
G1 X183.515 Y152.5 E.12112
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:2.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;2.4
G1 E-.64 F2100
;WIPE_START
G1 F6178.615
G1 X182.515 Y152.5 E-.16
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;2.4
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=1843 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
M486 S0
G1 X184.346 Y186.768 Z2.4 F24000
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F2311
G1 X175.654 Y186.768 E.29424
G1 X175.654 Y152.154 E1.17165
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y186.728 E1.17029
;PATH_TASK id=1844 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
M204 T2500
G1 X184.389 Y186.728 F24000
G1 X184.389 Y186.811
G1 X184.389 Y186.811
G1 X184.775 Y187.196
M204 P2500
;TYPE:Outer wall
G1 F2311
G1 X175.225 Y187.196 E.32326
G1 X175.225 Y151.725 E1.20066
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y187.156 E1.1993
;PATH_TASK id=1845 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X183.775 Y187.16 E-.16
;WIPE_END
G1 X183.775 Y186.81 F24000
G1 X183.399 Y186.81
G1 X183.399 Y186.606
G1 E.8 F1800
M204 P1500
;TYPE:Top surface
;WIDTH:0.431278
G1 F2311
G1 X184.185 Y185.82 E.0359
;PATH_TASK id=1846 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
G1 X184.185 Y185.271 F24000
G1 F2311
G1 X182.85 Y186.606 E.06099
;PATH_TASK id=1847 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
G1 X182.301 Y186.606 F24000
G1 F2311
G1 X184.185 Y184.722 E.08607
;PATH_TASK id=1848 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
G1 X184.185 Y184.172 F24000
G1 F2311
G1 X181.751 Y186.606 E.11115
;PATH_TASK id=1849 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
G1 X181.202 Y186.606 F24000
G1 F2311
G1 X183.741 Y184.068 E.11594
;PATH_TASK id=1850 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
G1 X183.192 Y184.068 F24000
G1 F2311
G1 X180.653 Y186.606 E.11594
;PATH_TASK id=1851 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
G1 X180.104 Y186.606 F24000
G1 F2311
G1 X182.642 Y184.068 E.11594
;PATH_TASK id=1852 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
G1 X182.093 Y184.068 F24000
G1 F2311
G1 X179.554 Y186.606 E.11594
;PATH_TASK id=1853 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
G1 X179.005 Y186.606 F24000
G1 F2311
G1 X181.544 Y184.068 E.11594
;PATH_TASK id=1854 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
G1 X180.995 Y184.068 F24000
G1 F2311
G1 X178.456 Y186.606 E.11594
;PATH_TASK id=1855 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
G1 X177.907 Y186.606 F24000
G1 F2311
G1 X180.445 Y184.068 E.11594
;PATH_TASK id=1856 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
G1 X179.896 Y184.068 F24000
G1 F2311
G1 X177.358 Y186.606 E.11594
;PATH_TASK id=1857 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
G1 X176.808 Y186.606 F24000
G1 F2311
G1 X179.347 Y184.068 E.11594
;PATH_TASK id=1858 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
G1 X178.798 Y184.068 F24000
G1 F2311
G1 X176.259 Y186.606 E.11594
;PATH_TASK id=1859 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
G1 X175.815 Y186.501 F24000
G1 F2311
G1 X178.249 Y184.068 E.11114
;PATH_TASK id=1860 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
G1 X177.699 Y184.068 F24000
G1 F2311
G1 X175.815 Y185.952 E.08606
;PATH_TASK id=1861 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
G1 X175.815 Y185.403 F24000
G1 F2311
G1 X177.15 Y184.068 E.06098
;PATH_TASK id=1862 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
G1 X176.601 Y184.068 F24000
G1 F2311
G1 X175.815 Y184.854 E.0359
;PATH_TASK id=1863 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
G1 X176.137 Y177.703 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.539932
G1 F2311
G1 X176.075 Y177.703 E.00257
G1 X176.043 Y177.757 E.00257
G1 X176.075 Y177.811 E.00257
G1 X176.137 Y177.811 E.00257
G1 X176.148 Y177.791 E.00091
;PATH_TASK id=1864 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
G1 X178.441 Y176.739 F24000
;TYPE:Sparse infill
;WIDTH:0.45
G1 F2311
G1 X176.441 Y176.739 E.0677
G2 X176.988 Y177.305 I2.159 J-1.54 E.02675
G1 X181.133 Y177.305 E.1403
G3 X180.586 Y176.739 I1.612 J-2.106 E.02675
G1 X182.586 Y176.739 E.0677
;PATH_TASK id=1865 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
G1 X184.184 Y182.12 F24000
;TYPE:Internal solid infill
;WIDTH:0.449999
G1 F2311
G1 X182.458 Y183.845 E.0826
G1 X181.882 Y183.845 E.01949
G1 X184 Y181.727 E.10139
G1 X184 Y181.152 E.01949
G1 X181.307 Y183.845 E.12894
G1 X180.731 Y183.845 E.01949
G1 X184 Y180.576 E.1565
G1 X184 Y180 E.01949
G1 X180.155 Y183.845 E.18406
G1 X179.58 Y183.845 E.01949
G1 X184 Y179.424 E.21162
G1 X184 Y178.849 E.01949
G1 X179.004 Y183.845 E.23918
G1 X178.428 Y183.845 E.01949
G1 X184 Y178.273 E.26673
G1 X184 Y177.712 E.019
G1 X183.986 Y177.712 E.00049
G1 X177.853 Y183.845 E.2936
G1 X177.277 Y183.845 E.01949
G1 X183.41 Y177.712 E.2936
G1 X182.835 Y177.712 E.01949
M73 P87 R4
G1 X176.701 Y183.845 E.2936
G1 X176.126 Y183.845 E.01949
G1 X182.259 Y177.712 E.2936
G1 X181.683 Y177.712 E.01949
G1 X176 Y183.395 E.27207
G1 X176 Y182.82 E.01949
G1 X181.107 Y177.712 E.24451
G1 X180.532 Y177.712 E.01949
G1 X176 Y182.244 E.21696
G1 X176 Y181.668 E.01949
G1 X179.956 Y177.712 E.1894
G1 X179.38 Y177.712 E.01949
G1 X176 Y181.093 E.16184
G1 X176 Y180.517 E.01949
G1 X178.805 Y177.712 E.13428
G1 X178.229 Y177.712 E.01949
G1 X176 Y179.941 E.10672
G1 X176 Y179.366 E.01949
G1 X177.653 Y177.712 E.07916
G1 X177.078 Y177.712 E.01949
G1 X175.816 Y178.973 E.06038
;PATH_TASK id=1866 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
G1 X176.705 Y177.508 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.449969
G1 F2311
G1 X175.857 Y178.357 E.04061
;PATH_TASK id=1867 conformal=0 surface=-1 source_layer=11 shell_offset=-1.000000
G1 X182.922 Y183.772 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.595971
G1 F2311
G1 X183.866 Y183.772 E.04342
G1 X183.866 Y182.828 E.04342
G1 X182.951 Y183.744 E.05956
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:2.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;2.6
G1 E-.64 F2100
;WIPE_START
G1 F8136.682
G1 X183.658 Y183.037 E-.16
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;2.6
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=1868 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
M486 S0
G1 X184.346 Y184.865 Z2.6 F24000
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F2778
G1 X175.654 Y184.865 E.29424
G1 X175.654 Y152.154 E1.10724
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y184.825 E1.10588
;PATH_TASK id=1869 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
M204 T2500
G1 X184.389 Y184.825 F24000
G1 X184.389 Y184.908
G1 X184.775 Y185.293
M204 P2500
;TYPE:Outer wall
G1 F2778
G1 X175.225 Y185.293 E.32326
G1 X175.225 Y151.725 E1.13625
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y185.253 E1.13489
;PATH_TASK id=1870 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X183.775 Y185.258 E-.16
;WIPE_END
G1 X183.775 Y184.478 F24000
G1 X183.96 Y184.478
G1 X183.96 Y182.39
G1 X183.399 Y182.39
G1 X183.399 Y182.165
G1 E.8 F1800
M204 P1500
;TYPE:Top surface
;WIDTH:0.431278
G1 F2778
G1 X184.185 Y182.951 E.0359
;PATH_TASK id=1871 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X184.185 Y183.5 F24000
G1 F2778
G1 X182.85 Y182.165 E.06099
;PATH_TASK id=1872 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X182.301 Y182.165 F24000
G1 F2778
G1 X184.185 Y184.049 E.08607
;PATH_TASK id=1873 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X184.185 Y184.599 F24000
G1 F2778
G1 X181.751 Y182.165 E.11115
;PATH_TASK id=1874 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X181.202 Y182.165 F24000
G1 F2778
G1 X183.741 Y184.703 E.11594
;PATH_TASK id=1875 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X183.192 Y184.703 F24000
G1 F2778
G1 X180.653 Y182.165 E.11594
;PATH_TASK id=1876 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X180.104 Y182.165 F24000
G1 F2778
G1 X182.642 Y184.703 E.11594
;PATH_TASK id=1877 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X182.093 Y184.703 F24000
G1 F2778
G1 X179.554 Y182.165 E.11594
;PATH_TASK id=1878 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X179.005 Y182.165 F24000
G1 F2778
G1 X181.544 Y184.703 E.11594
;PATH_TASK id=1879 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X180.995 Y184.703 F24000
G1 F2778
G1 X178.456 Y182.165 E.11594
;PATH_TASK id=1880 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X177.907 Y182.165 F24000
G1 F2778
G1 X180.445 Y184.703 E.11594
;PATH_TASK id=1881 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X179.896 Y184.703 F24000
G1 F2778
G1 X177.358 Y182.165 E.11594
;PATH_TASK id=1882 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X176.808 Y182.165 F24000
G1 F2778
G1 X179.347 Y184.703 E.11594
;PATH_TASK id=1883 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X178.798 Y184.703 F24000
G1 F2778
G1 X176.259 Y182.165 E.11594
;PATH_TASK id=1884 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X175.815 Y182.27 F24000
M73 P88 R4
G1 F2778
G1 X178.249 Y184.703 E.11114
;PATH_TASK id=1885 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X177.699 Y184.703 F24000
G1 F2778
G1 X175.815 Y182.819 E.08606
;PATH_TASK id=1886 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X175.815 Y183.368 F24000
G1 F2778
G1 X177.15 Y184.703 E.06098
;PATH_TASK id=1887 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X176.601 Y184.703 F24000
G1 F2778
G1 X175.815 Y183.917 E.0359
;PATH_TASK id=1888 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F6000
G1 X176.522 Y184.625 E-.16
;WIPE_END
G1 X176.122 Y181.86 F24000
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.51301
G1 F2778
G2 X176.122 Y181.962 I-.029 J.051 E.00962
G1 X176.131 Y181.945 E.00073
;PATH_TASK id=1889 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X182.133 Y176.106 F24000
;WIDTH:0.449999
G1 F2778
G1 X184 Y177.973 E.08939
G1 X184 Y178.549 E.01949
G1 X181.741 Y176.289 E.10818
G1 X181.165 Y176.289 E.01949
G1 X184 Y179.124 E.13573
G1 X184 Y179.7 E.01949
G1 X180.589 Y176.289 E.16329
G1 X180.014 Y176.289 E.01949
G1 X184 Y180.276 E.19085
G1 X184 Y180.851 E.01949
G1 X179.438 Y176.289 E.21841
G1 X178.862 Y176.289 E.01949
G1 X184 Y181.427 E.24597
G1 X184 Y181.942 E.01744
G1 X183.94 Y181.942 E.00205
G1 X178.286 Y176.289 E.27063
G1 X177.711 Y176.289 E.01949
G1 X183.364 Y181.942 E.27063
G1 X182.789 Y181.942 E.01949
G1 X177.135 Y176.289 E.27063
G1 X176.559 Y176.289 E.01949
G1 X182.213 Y181.942 E.27063
G1 X181.637 Y181.942 E.01949
G1 X176 Y176.305 E.26987
G1 X176 Y176.88 E.01949
G1 X181.062 Y181.942 E.24231
G1 X180.486 Y181.942 E.01949
G1 X176 Y177.456 E.21476
G1 X176 Y178.032 E.01949
G1 X179.91 Y181.942 E.1872
G1 X179.334 Y181.942 E.01949
G1 X176 Y178.607 E.15964
G1 X176 Y179.183 E.01949
G1 X178.759 Y181.942 E.13208
G1 X178.183 Y181.942 E.01949
G1 X176 Y179.759 E.10452
G1 X176 Y180.335 E.01949
G1 X177.607 Y181.942 E.07696
G1 X177.032 Y181.942 E.01949
G1 X175.816 Y180.727 E.05818
;PATH_TASK id=1890 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X176.66 Y182.146 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.449968
G1 F2778
G1 X175.857 Y181.343 E.03841
;PATH_TASK id=1891 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X182.604 Y176.289 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.449999
G1 F2778
G1 X183.939 Y177.624 E.06391
G1 X183.939 Y176.289 E.04519
G1 X182.644 Y176.289 E.04384
;PATH_TASK id=1892 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X183.572 Y176.639 F24000
;WIDTH:0.41796
G1 F2778
G1 X183.501 Y176.68 E.00253
G1 X183.575 Y176.714 E.00254
;PATH_TASK id=1893 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X184 Y173.261 F24000
;TYPE:Sparse infill
;WIDTH:0.45
;HEIGHT:0.4
G1 F2778
G1 X184 Y171.261 E.12112
G1 X183.811 Y170.674 E.03735
G1 X183.109 Y169.971 E.06018
G1 X181.036 Y169.304 E.13185
G1 X180.334 Y168.601 E.06018
G1 X179.666 Y166.529 E.13185
G1 X178.964 Y165.826 E.06018
G1 X176.891 Y165.159 E.13185
G1 X176.189 Y164.456 E.06018
G1 X176 Y163.869 E.03735
G1 X176 Y161.869 E.12112
;PATH_TASK id=1894 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X176 Y166.014 F24000
G1 F2778
G1 X176 Y168.014 E.12112
G1 X176.189 Y168.601 E.03735
G1 X176.891 Y169.304 E.06018
G1 X178.964 Y169.971 E.13185
G1 X179.666 Y170.674 E.06018
G1 X180.334 Y172.746 E.13185
G1 X181.036 Y173.449 E.06018
G1 X183.109 Y174.116 E.13185
G1 X183.811 Y174.819 E.06018
G3 X184 Y175.882 I-1.557 J.825 E.06645
G1 X180.009 Y175.882 E.24175
G1 X179.666 Y174.819 E.06762
G1 X178.964 Y174.116 E.06018
G1 X176.891 Y173.449 E.13185
G1 X176.189 Y172.746 E.06018
G1 X176 Y172.159 E.03735
G1 X176 Y170.159 E.12112
;PATH_TASK id=1895 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X184 Y169.116 F24000
G1 F2778
G1 X184 Y167.116 E.12112
G1 X183.811 Y166.529 E.03735
G1 X183.109 Y165.826 E.06018
G1 X181.036 Y165.159 E.13185
G1 X180.334 Y164.456 E.06018
G1 X179.666 Y162.384 E.13185
G1 X178.964 Y161.681 E.06018
G1 X176.891 Y161.014 E.13185
G1 X176.189 Y160.311 E.06018
G1 X176 Y159.724 E.03735
G1 X176 Y157.724 E.12112
;PATH_TASK id=1896 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X184 Y156.681 F24000
G1 F2778
G1 X184 Y154.681 E.12112
G1 X183.811 Y154.094 E.03735
G1 X183.109 Y153.391 E.06018
G1 X181.036 Y152.724 E.13185
G1 X180.812 Y152.5 E.01921
G1 X182.812 Y152.5 E.12112
;PATH_TASK id=1897 conformal=0 surface=-1 source_layer=12 shell_offset=-1.000000
G1 X184 Y160.826 F24000
G1 F2778
G1 X184 Y158.826 E.12112
G1 X183.811 Y158.239 E.03735
G1 X183.109 Y157.536 E.06018
G1 X181.036 Y156.869 E.13185
G1 X180.334 Y156.166 E.06018
G1 X179.666 Y154.094 E.13185
G1 X178.964 Y153.391 E.06018
G1 X176.891 Y152.724 E.13185
G1 X176.667 Y152.5 E.01921
G1 X176 Y152.5 E.04042
G1 X176 Y155.579 E.18649
G1 X176.189 Y156.166 E.03735
G1 X176.891 Y156.869 E.06018
G1 X178.964 Y157.536 E.13185
G1 X179.666 Y158.239 E.06018
G1 X180.334 Y160.311 E.13185
G1 X181.036 Y161.014 E.06018
G1 X183.109 Y161.681 E.13185
G1 X183.811 Y162.384 E.06018
G1 X184 Y162.971 E.03735
G1 X184 Y164.971 E.12112
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:2.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;2.8
G1 E-.64 F2100
;WIPE_START
G1 F6178.615
G1 X184 Y163.971 E-.16
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;2.8
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=1898 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
M486 S0
G1 X184.346 Y182.962 Z2.8 F24000
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F2245
G1 X175.654 Y182.962 E.29424
G1 X175.654 Y152.154 E1.04283
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y182.922 E1.04147
;PATH_TASK id=1899 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
M204 T2500
G1 X184.389 Y182.922 F24000
G1 X184.389 Y183.005
G1 X184.775 Y183.39
M204 P2500
;TYPE:Outer wall
G1 F2245
G1 X175.225 Y183.39 E.32326
G1 X175.225 Y151.725 E1.07184
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y183.35 E1.07048
;PATH_TASK id=1900 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X183.775 Y183.355 E-.16
;WIPE_END
G1 X183.775 Y183.005 F24000
G1 X183.403 Y183.005
G1 X183.403 Y182.801
G1 E.8 F1800
M204 P1500
;TYPE:Top surface
;WIDTH:0.429277
G1 F2245
G1 X184.185 Y182.019 E.03553
;PATH_TASK id=1901 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X184.185 Y181.472 F24000
G1 F2245
G1 X182.857 Y182.801 E.06035
;PATH_TASK id=1902 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X182.31 Y182.801 F24000
G1 F2245
G1 X184.185 Y180.926 E.08517
;PATH_TASK id=1903 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X184.185 Y180.379 F24000
G1 F2245
G1 X181.764 Y182.801 E.11
;PATH_TASK id=1904 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X181.218 Y182.801 F24000
G1 F2245
G1 X184.185 Y179.833 E.13482
;PATH_TASK id=1905 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X184.185 Y179.287 F24000
G1 F2245
G1 X180.671 Y182.801 E.15965
;PATH_TASK id=1906 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X180.125 Y182.801 F24000
G1 F2245
G1 X184.185 Y178.74 E.18447
;PATH_TASK id=1907 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X184.185 Y178.194 F24000
G1 F2245
G1 X179.578 Y182.801 E.20929
;PATH_TASK id=1908 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X179.032 Y182.801 F24000
G1 F2245
G1 X184.185 Y177.648 E.23412
;PATH_TASK id=1909 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X183.7 Y177.586 F24000
G1 F2245
G1 X178.486 Y182.801 E.23689
;PATH_TASK id=1910 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X177.939 Y182.801 F24000
G1 F2245
G1 X183.153 Y177.586 E.23689
;PATH_TASK id=1911 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X182.607 Y177.586 F24000
G1 F2245
G1 X177.393 Y182.801 E.23689
;PATH_TASK id=1912 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X176.846 Y182.801 F24000
G1 F2245
G1 X182.061 Y177.586 E.23689
;PATH_TASK id=1913 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X181.514 Y177.586 F24000
G1 F2245
G1 X176.3 Y182.801 E.23689
;PATH_TASK id=1914 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X175.815 Y182.739 F24000
G1 F2245
G1 X180.968 Y177.586 E.23411
;PATH_TASK id=1915 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X180.421 Y177.586 F24000
G1 F2245
G1 X175.815 Y182.193 E.20929
;PATH_TASK id=1916 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X175.815 Y181.647 F24000
G1 F2245
G1 X179.875 Y177.586 E.18446
;PATH_TASK id=1917 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X179.329 Y177.586 F24000
G1 F2245
G1 X175.815 Y181.1 E.15964
;PATH_TASK id=1918 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X175.815 Y180.554 F24000
G1 F2245
G1 X178.782 Y177.586 E.13482
;PATH_TASK id=1919 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X178.236 Y177.586 F24000
G1 F2245
G1 X175.815 Y180.007 E.10999
;PATH_TASK id=1920 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X175.815 Y179.461 F24000
G1 F2245
G1 X177.689 Y177.586 E.08517
;PATH_TASK id=1921 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X177.143 Y177.586 F24000
G1 F2245
G1 X175.815 Y178.915 E.06034
;PATH_TASK id=1922 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X175.815 Y178.368 F24000
G1 F2245
G1 X176.597 Y177.586 E.03552
;PATH_TASK id=1923 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X176.407 Y171.318 F24000
M204 P4000
;TYPE:Sparse infill
;WIDTH:0.45
G1 F2245
G1 X176.407 Y173.318 E.0677
G1 X176.891 Y173.802 E.0232
G1 X178.964 Y173.762 E.07017
G1 X179.66 Y174.459 E.03332
G1 X183.593 Y174.459 E.13314
G1 X183.593 Y174.247 E.00716
G1 X183.109 Y173.762 E.0232
G1 X181.036 Y173.802 E.07017
G1 X179.98 Y172.746 E.05056
G1 X180.02 Y170.674 E.07017
G1 X179.557 Y170.211 E.02217
G1 X180.656 Y169.636 E.04198
G1 X181.317 Y170.005 E.02562
;PATH_TASK id=1924 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X183.969 Y174.692 F24000
;TYPE:Internal solid infill
;WIDTH:0.388955
G1 F2245
G1 X183.97 Y169.377 E.15292
;PATH_TASK id=1925 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X176.061 Y177.364 F24000
;WIDTH:0.449319
G1 F2245
G1 X183.939 Y177.364 E.26624
G1 X183.942 Y175.008 E.07961
;PATH_TASK id=1926 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
;WIDTH:0.430956
G1 X183.955 Y174.85 E.00511
;PATH_TASK id=1927 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
;WIDTH:0.412626
G1 X183.969 Y174.692 E.00487
G1 X183.797 Y174.863 E.00744
;PATH_TASK id=1928 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
;WIDTH:0.44846
G3 X176.203 Y174.863 I-3.797 J-1214.445 E.25607
G1 X176.057 Y174.718 E.00695
G3 X176.061 Y177.324 I-488.226 J2.002 E.08789
;PATH_TASK id=1929 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X176.468 Y176.957 F24000
;WIDTH:0.449999
G1 F2245
G1 X183.532 Y176.957 E.23913
G1 X183.532 Y175.273 E.05701
G1 X176.468 Y175.273 E.23913
G1 X176.468 Y176.917 E.05566
;PATH_TASK id=1930 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X176.875 Y176.55 F24000
G1 F2245
G1 X183.125 Y176.55 E.21157
G1 X183.125 Y175.68 E.02945
G1 X176.875 Y175.68 E.21157
G1 X176.875 Y176.51 E.0281
;PATH_TASK id=1931 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X177.31 Y176.115 F24000
;WIDTH:0.505948
G1 F2245
G1 X182.65 Y176.115 E.20561
;PATH_TASK id=1932 conformal=0 surface=-1 source_layer=13 shell_offset=-1.000000
G1 X176.03 Y169.691 F24000
;WIDTH:0.388942
G1 F2245
G1 X176.03 Y174.652 E.14275
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:3
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;3
G1 E-.64 F2100
;WIPE_START
G1 F12000
G1 X176.03 Y173.652 E-.16
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;3
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=1933 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000
M486 S0
G1 X175.654 Y178.384 Z3 F24000
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F2380
G1 X175.654 Y152.154 E.88786
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y178.384 E.88786
G1 X175.694 Y178.384 E.29289
;PATH_TASK id=1934 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000
M204 T2500
G1 X175.694 Y178.426 F24000
G1 X175.611 Y178.427
G1 X175.225 Y178.812
M204 P2500
;TYPE:Outer wall
G1 F2380
G1 X175.225 Y151.725 E.91687
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y178.812 E.91687
G1 X175.265 Y178.812 E.3219
;PATH_TASK id=1935 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X175.264 Y177.812 E-.16
;WIPE_END
G1 X176.04 Y177.812 F24000
G1 X176.04 Y176.389
G1 X176.059 Y176.389
G1 X176.059 Y175.943
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.446624
G1 F2380
G1 X183.941 Y175.943 E.26459
G1 X183.941 Y175.685 E.00864
G1 X183.795 Y175.539 E.00694
G1 X176.205 Y175.539 E.25477
G1 X176.059 Y175.685 E.00694
G1 X176.059 Y175.903 E.0073
;PATH_TASK id=1936 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000
G1 X177.397 Y169.135 F24000
;TYPE:Sparse infill
;WIDTH:0.45
;HEIGHT:0.4
G1 F2380
G2 X178.348 Y169.148 I.542 J-4.633 E.0577
G1 X179.041 Y169.135 E.04199
G1 X179.366 Y169.276 E.02146
G1 X180.041 Y168.601 E.05781
G1 X179.959 Y166.529 E.12561
G1 X181.036 Y165.452 E.09225
G1 X183.109 Y165.533 E.12561
G1 X184 Y164.642 E.07637
G1 X184 Y160.497 E.25102
G1 X183.109 Y161.388 E.07637
G1 X181.036 Y161.306 E.12561
G1 X179.959 Y162.384 E.09225
G1 X180.041 Y164.456 E.12561
G1 X178.964 Y165.533 E.09225
G1 X176.891 Y165.452 E.12561
G1 X176 Y166.343 E.07637
G1 X176 Y162.198 E.25102
G1 X176.891 Y161.306 E.07637
G1 X178.964 Y161.388 E.12561
G1 X180.041 Y160.311 E.09225
G1 X179.959 Y158.239 E.12561
G1 X181.036 Y157.161 E.09225
G1 X183.109 Y157.243 E.12561
G1 X184 Y156.352 E.07637
G1 X184 Y152.5 E.23328
G1 X183.708 Y152.5 E.01774
G1 X183.109 Y153.098 E.05128
G1 X181.036 Y153.016 E.12561
G1 X179.959 Y154.094 E.09225
G1 X180.041 Y156.166 E.12561
G1 X178.964 Y157.243 E.09225
G1 X176.891 Y157.161 E.12561
G1 X176 Y158.053 E.07637
G1 X176 Y153.908 E.25102
G1 X176.891 Y153.016 E.07637
G1 X178.964 Y153.098 E.12561
G1 X179.562 Y152.5 E.05128
G1 X177.562 Y152.5 E.12112
;PATH_TASK id=1937 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000
G1 X184.181 Y174.864 F24000
M204 P1500
;TYPE:Internal Bridge
;WIDTH:0.4
G1 F2380
M73 P89 R4
G1 X183.933 Y175.112 E.01835
G1 X183.297 Y175.112 E.03325
G1 X183.979 Y174.43 E.0504
G1 X183.979 Y173.794 E.03325
G1 X182.66 Y175.112 E.09742
G1 X182.024 Y175.112 E.03325
G1 X183.979 Y173.157 E.14444
G1 X183.979 Y172.521 E.03325
G1 X181.388 Y175.112 E.19147
G1 X180.751 Y175.112 E.03325
G1 X183.979 Y171.884 E.23849
G1 X183.979 Y171.248 E.03325
G1 X180.115 Y175.112 E.28551
G1 X179.478 Y175.112 E.03325
G1 X183.979 Y170.612 E.33253
G1 X183.979 Y169.975 E.03325
G1 X178.842 Y175.112 E.37955
G1 X178.206 Y175.112 E.03325
G1 X183.894 Y169.424 E.42028
G1 X183.465 Y169.595 E.02413
G1 X183.1 Y169.582 E.01911
G1 X177.569 Y175.112 E.40862
G1 X176.933 Y175.112 E.03325
G1 X182.468 Y169.577 E.40893
G1 X181.819 Y169.59 E.03391
G1 X176.296 Y175.112 E.40801
G1 X176.021 Y175.119 E.01439
G1 X176.021 Y174.751 E.01924
G1 X181.274 Y169.499 E.38808
G1 X180.962 Y169.336 E.01837
G1 X180.881 Y169.255 E.00598
G1 X176.021 Y174.115 E.35908
G1 X176.021 Y173.478 E.03325
G1 X180.009 Y169.491 E.29462
G1 X179.453 Y169.781 E.03275
G1 X179.194 Y169.669 E.01475
G1 X176.021 Y172.842 E.23445
G1 X176.021 Y172.206 E.03325
G1 X178.656 Y169.571 E.19465
G1 X178.007 Y169.584 E.03391
G1 X176.021 Y171.569 E.14671
G1 X176.021 Y170.933 E.03325
G1 X177.39 Y169.564 E.10112
G1 X177.014 Y169.533 E.01968
G1 X176.899 Y169.418 E.00849
G1 X175.819 Y170.499 E.07986
;PATH_TASK id=1938 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000
G1 X183.393 Y176.163 F24000
;TYPE:Top surface
;WIDTH:0.433861
;HEIGHT:0.2
G1 F2380
M106 S255
G1 X184.185 Y176.955 E.03639
;PATH_TASK id=1939 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000
G1 X184.185 Y177.508 F24000
G1 F2380
G1 X182.841 Y176.163 E.06181
;PATH_TASK id=1940 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000
G1 X182.288 Y176.163 F24000
G1 F2380
G1 X184.185 Y178.061 E.08723
;PATH_TASK id=1941 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000
G1 X183.794 Y178.222 F24000
G1 F2380
G1 X181.735 Y176.163 E.09465
;PATH_TASK id=1942 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000
G1 X181.182 Y176.163 F24000
G1 F2380
G1 X183.241 Y178.222 E.09465
;PATH_TASK id=1943 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000
G1 X182.688 Y178.222 F24000
G1 F2380
G1 X180.629 Y176.163 E.09465
;PATH_TASK id=1944 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000
G1 X180.076 Y176.163 F24000
G1 F2380
G1 X182.135 Y178.222 E.09465
;PATH_TASK id=1945 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000
G1 X181.582 Y178.222 F24000
G1 F2380
G1 X179.523 Y176.163 E.09465
;PATH_TASK id=1946 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000
G1 X178.97 Y176.163 F24000
G1 F2380
G1 X181.029 Y178.222 E.09465
;PATH_TASK id=1947 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000
G1 X180.477 Y178.222 F24000
G1 F2380
G1 X178.418 Y176.163 E.09465
;PATH_TASK id=1948 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000
G1 X177.865 Y176.163 F24000
G1 F2380
G1 X179.924 Y178.222 E.09465
;PATH_TASK id=1949 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000
G1 X179.371 Y178.222 F24000
G1 F2380
G1 X177.312 Y176.163 E.09465
;PATH_TASK id=1950 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000
G1 X176.759 Y176.163 F24000
G1 F2380
G1 X178.818 Y178.222 E.09465
;PATH_TASK id=1951 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000
G1 X178.265 Y178.222 F24000
G1 F2380
G1 X176.206 Y176.163 E.09465
;PATH_TASK id=1952 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000
G1 X175.815 Y176.325 F24000
G1 F2380
G1 X177.712 Y178.222 E.08722
;PATH_TASK id=1953 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000
G1 X177.159 Y178.222 F24000
G1 F2380
G1 X175.815 Y176.878 E.06181
;PATH_TASK id=1954 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000
G1 X175.815 Y177.431 F24000
G1 F2380
G1 X176.606 Y178.222 E.03639
;PATH_TASK id=1955 conformal=0 surface=-1 source_layer=14 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F6000
G1 X175.899 Y177.515 E-.16
;WIPE_END
G1 X176.2 Y176.169 F24000
G1 E.8 F1800
M204 P2500
;TYPE:Gap infill
;WIDTH:0.0924405
G1 F2380
G1 X175.936 Y176.169 E.00109
G1 X175.857 Y176.202 E.00035
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:3.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;3.2
G1 E-.69803 F2100
;WIPE_START
G1 F7200
G1 X175.936 Y176.169 E-.02478
G1 X176.2 Y176.169 E-.07718
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;3.2
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=1956 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
M486 S0
G1 X184.346 Y176.961 Z3.2 F24000
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F1880
G1 X175.654 Y176.961 E.29424
G1 X175.654 Y152.154 E.83969
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y176.921 E.83833
;PATH_TASK id=1957 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
M204 T2500
G1 X184.389 Y176.921 F24000
G1 X184.389 Y177.003
G1 X184.775 Y177.389
M204 P2500
;TYPE:Outer wall
G1 F1880
G1 X175.225 Y177.389 E.32326
G1 X175.225 Y151.725 E.8687
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y177.349 E.86734
;PATH_TASK id=1958 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X183.775 Y177.353 E-.16
;WIPE_END
G1 X183.775 Y177.003 F24000
G1 X183.393 Y177.003
G1 X183.393 Y176.799
G1 E.8 F1800
M204 P1500
;TYPE:Top surface
;WIDTH:0.433862
G1 F1880
G1 X184.185 Y176.008 E.03639
;PATH_TASK id=1959 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
G1 X184.185 Y175.455 F24000
G1 F1880
G1 X182.841 Y176.799 E.06181
;PATH_TASK id=1960 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
G1 X182.288 Y176.799 F24000
G1 F1880
G1 X184.185 Y174.902 E.08723
;PATH_TASK id=1961 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
G1 X183.794 Y174.74 F24000
G1 F1880
G1 X181.735 Y176.799 E.09465
;PATH_TASK id=1962 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
G1 X181.182 Y176.799 F24000
G1 F1880
G1 X183.241 Y174.74 E.09465
;PATH_TASK id=1963 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
G1 X182.688 Y174.74 F24000
G1 F1880
G1 X180.629 Y176.799 E.09465
;PATH_TASK id=1964 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
G1 X180.076 Y176.799 F24000
G1 F1880
G1 X182.135 Y174.74 E.09465
;PATH_TASK id=1965 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
G1 X181.582 Y174.74 F24000
G1 F1880
G1 X179.523 Y176.799 E.09465
;PATH_TASK id=1966 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
G1 X178.97 Y176.799 F24000
G1 F1880
G1 X181.029 Y174.74 E.09465
;PATH_TASK id=1967 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
G1 X180.477 Y174.74 F24000
G1 F1880
G1 X178.418 Y176.799 E.09465
;PATH_TASK id=1968 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
G1 X177.865 Y176.799 F24000
G1 F1880
G1 X179.924 Y174.74 E.09465
;PATH_TASK id=1969 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
G1 X179.371 Y174.74 F24000
G1 F1880
G1 X177.312 Y176.799 E.09465
;PATH_TASK id=1970 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
G1 X176.759 Y176.799 F24000
G1 F1880
G1 X178.818 Y174.74 E.09465
;PATH_TASK id=1971 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
G1 X178.265 Y174.74 F24000
G1 F1880
G1 X176.206 Y176.799 E.09465
;PATH_TASK id=1972 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
G1 X175.815 Y176.638 F24000
G1 F1880
G1 X177.712 Y174.74 E.08722
;PATH_TASK id=1973 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
G1 X177.159 Y174.74 F24000
G1 F1880
G1 X175.815 Y176.085 E.06181
;PATH_TASK id=1974 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
G1 X175.815 Y175.532 F24000
G1 F1880
G1 X176.606 Y174.74 E.03639
;PATH_TASK id=1975 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
G1 X184.143 Y174.779 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.099973
G1 F1880
G1 X184.064 Y174.746 E.0004
G1 X183.8 Y174.746 E.00126
;PATH_TASK id=1976 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
G1 X182.55 Y174.518 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.449999
G1 F1880
G1 X183.939 Y174.518 E.04703
G1 X183.939 Y173.129 E.04703
G1 X182.578 Y174.49 E.06516
;PATH_TASK id=1977 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
G1 X183.558 Y174.067 F24000
;WIDTH:0.449746
G1 F1880
G2 X183.563 Y174.146 I-.023 J.041 E.0069
;PATH_TASK id=1978 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
G1 X184.184 Y172.596 F24000
;WIDTH:0.449999
G1 F1880
G1 X182.262 Y174.518 E.09198
G1 X181.686 Y174.518 E.01949
G1 X184 Y172.204 E.11077
G1 X184 Y171.628 E.01949
G1 X181.111 Y174.518 E.13833
G1 X180.535 Y174.518 E.01949
G1 X184 Y171.052 E.16589
G1 X184 Y170.477 E.01949
G1 X179.959 Y174.518 E.19345
G1 X179.384 Y174.518 E.01949
G1 X184 Y169.901 E.22101
G1 X184 Y169.34 E.019
G1 X183.986 Y169.34 E.00049
G1 X178.808 Y174.518 E.24787
G1 X178.232 Y174.518 E.01949
G1 X183.41 Y169.34 E.24787
G1 X182.835 Y169.34 E.01949
G1 X177.656 Y174.518 E.24787
G1 X177.081 Y174.518 E.01949
G1 X182.259 Y169.34 E.24787
G1 X181.683 Y169.34 E.01949
G1 X176.505 Y174.518 E.24787
G1 X176 Y174.518 E.01711
G1 X176 Y174.448 E.00237
G1 X181.107 Y169.34 E.24451
G1 X180.532 Y169.34 E.01949
G1 X176 Y173.872 E.21696
G1 X176 Y173.296 E.01949
G1 X179.956 Y169.34 E.1894
G1 X179.38 Y169.34 E.01949
G1 X176 Y172.721 E.16184
G1 X176 Y172.145 E.01949
G1 X178.805 Y169.34 E.13428
G1 X178.229 Y169.34 E.01949
G1 X176 Y171.569 E.10672
G1 X176 Y170.994 E.01949
G1 X177.653 Y169.34 E.07916
G1 X177.078 Y169.34 E.01949
G1 X175.816 Y170.601 E.06038
;PATH_TASK id=1979 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
G1 X176.705 Y169.136 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.449969
G1 F1880
G1 X175.857 Y169.985 E.04061
;PATH_TASK id=1980 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
G1 X176.137 Y169.331 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.539932
G1 F1880
G1 X176.075 Y169.331 E.00257
G1 X176.043 Y169.385 E.00257
G1 X176.075 Y169.439 E.00257
G1 X176.137 Y169.439 E.00257
G1 X176.148 Y169.419 E.00091
;PATH_TASK id=1981 conformal=0 surface=-1 source_layer=15 shell_offset=-1.000000
G1 X177.356 Y168.933 F24000
;TYPE:Sparse infill
;WIDTH:0.45
G1 F1880
G1 X179.356 Y168.933 E.0677
G1 X179.633 Y168.656 E.01327
G1 X183.778 Y168.656 E.1403
G1 X183.501 Y168.933 E.01327
G1 X181.501 Y168.933 E.0677
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:3.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;3.4
G1 E-.64 F2100
;WIPE_START
G1 F11054.348
G1 X182.501 Y168.933 E-.16
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;3.4
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=1982 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
M486 S0
G1 X175.654 Y175.538 Z3.4 F24000
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F2161
G1 X175.654 Y152.154 E.79152
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y175.538 E.79152
G1 X175.694 Y175.538 E.29289
;PATH_TASK id=1983 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
M204 T2500
G1 X175.694 Y175.58 F24000
G1 X175.611 Y175.58
G1 X175.611 Y175.58
G1 X175.225 Y175.966
M204 P2500
;TYPE:Outer wall
G1 F2161
G1 X175.225 Y151.725 E.82053
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y175.966 E.82053
G1 X175.265 Y175.966 E.3219
;PATH_TASK id=1984 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X175.263 Y174.966 E-.16
;WIPE_END
G1 X175.611 Y174.966 F24000
G1 X175.611 Y173.012
G1 X176.122 Y173.012
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.51301
G1 F2161
G2 X176.122 Y173.114 I-.029 J.051 E.00962
G1 X176.131 Y173.098 E.00073
;PATH_TASK id=1985 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
G1 X183.393 Y173.317 F24000
M204 P1500
;TYPE:Top surface
;WIDTH:0.433862
G1 F2161
G1 X184.185 Y174.109 E.03639
;PATH_TASK id=1986 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
G1 X184.185 Y174.662 F24000
G1 F2161
G1 X182.841 Y173.317 E.06181
;PATH_TASK id=1987 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
G1 X182.288 Y173.317 F24000
G1 F2161
G1 X184.185 Y175.215 E.08723
;PATH_TASK id=1988 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
G1 X183.794 Y175.376 F24000
G1 F2161
G1 X181.735 Y173.317 E.09465
;PATH_TASK id=1989 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
G1 X181.182 Y173.317 F24000
G1 F2161
G1 X183.241 Y175.376 E.09465
;PATH_TASK id=1990 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
G1 X182.688 Y175.376 F24000
G1 F2161
G1 X180.629 Y173.317 E.09465
;PATH_TASK id=1991 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
G1 X180.076 Y173.317 F24000
G1 F2161
G1 X182.135 Y175.376 E.09465
;PATH_TASK id=1992 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
G1 X181.582 Y175.376 F24000
G1 F2161
G1 X179.523 Y173.317 E.09465
;PATH_TASK id=1993 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
G1 X178.97 Y173.317 F24000
G1 F2161
G1 X181.029 Y175.376 E.09465
;PATH_TASK id=1994 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
G1 X180.477 Y175.376 F24000
G1 F2161
G1 X178.418 Y173.317 E.09465
;PATH_TASK id=1995 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
G1 X177.865 Y173.317 F24000
G1 F2161
G1 X179.924 Y175.376 E.09465
;PATH_TASK id=1996 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
G1 X179.371 Y175.376 F24000
G1 F2161
G1 X177.312 Y173.317 E.09465
;PATH_TASK id=1997 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
G1 X176.759 Y173.317 F24000
G1 F2161
G1 X178.818 Y175.376 E.09465
;PATH_TASK id=1998 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
G1 X178.265 Y175.376 F24000
G1 F2161
G1 X176.206 Y173.317 E.09465
;PATH_TASK id=1999 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
G1 X175.815 Y173.479 F24000
G1 F2161
G1 X177.712 Y175.376 E.08722
;PATH_TASK id=2000 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
G1 X177.159 Y175.376 F24000
G1 F2161
G1 X175.815 Y174.032 E.06181
;PATH_TASK id=2001 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
G1 X175.815 Y174.585 F24000
G1 F2161
G1 X176.606 Y175.376 E.03639
;PATH_TASK id=2002 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F6000
G1 X175.899 Y174.669 E-.16
;WIPE_END
G1 X176.2 Y173.323 F24000
G1 E.8 F1800
M204 P2500
;TYPE:Gap infill
;WIDTH:0.0924659
G1 F2161
G1 X175.936 Y173.323 E.00109
G1 X175.857 Y173.356 E.00035
;PATH_TASK id=2003 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
G1 X181.85 Y167.798 F24000
M204 P4000
;TYPE:Sparse infill
;WIDTH:0.45
;HEIGHT:0.4
G1 F2161
G1 X179.85 Y167.798 E.12112
G1 X180.666 Y166.529 E.09142
G1 X181.036 Y166.159 E.03169
G1 X183.109 Y164.826 E.14921
G2 X184 Y163.645 I-2.272 J-2.642 E.09033
G1 X184 Y159.5 E.25102
G3 X183.109 Y160.681 I-3.163 J-1.46 E.09033
G1 X181.036 Y162.014 E.14921
G1 X180.666 Y162.384 E.03169
G1 X179.334 Y164.456 E.14921
G1 X178.964 Y164.826 E.03169
G1 X176.891 Y166.159 E.14921
G2 X176 Y167.34 I2.272 J2.642 E.09033
G1 X176 Y163.195 E.25102
G3 X176.891 Y162.014 I3.163 J1.46 E.09033
G1 X178.964 Y160.681 E.14921
G1 X179.334 Y160.311 E.0317
G1 X180.666 Y158.239 E.14921
G1 X181.036 Y157.869 E.03169
G1 X183.109 Y156.536 E.14921
G2 X184 Y155.355 I-2.272 J-2.642 E.09033
G1 X184 Y152.5 E.17291
G1 X182.94 Y152.5 E.06421
G1 X181.036 Y153.724 E.13707
G1 X180.666 Y154.094 E.0317
G1 X179.334 Y156.166 E.14921
G1 X178.964 Y156.536 E.0317
G1 X176.891 Y157.869 E.14921
G2 X176 Y159.05 I2.272 J2.642 E.09033
M73 P90 R4
G1 X176 Y154.905 E.25102
G3 X176.891 Y153.724 I3.163 J1.46 E.09033
G1 X178.795 Y152.5 E.13707
G1 X176.795 Y152.5 E.12112
;PATH_TASK id=2004 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
G1 X182.322 Y168.022 F24000
;TYPE:Internal solid infill
;WIDTH:0.449999
;HEIGHT:0.2
G1 F2161
G1 X184 Y169.701 E.08036
G1 X184 Y170.277 E.01949
G1 X181.929 Y168.206 E.09915
G1 X181.354 Y168.206 E.01949
G1 X184 Y170.852 E.12671
G1 X184 Y171.428 E.01949
G1 X180.778 Y168.206 E.15426
G1 X180.202 Y168.206 E.01949
G1 X184 Y172.004 E.18182
G1 X184 Y172.58 E.01949
G1 X179.626 Y168.206 E.20938
G1 X179.051 Y168.206 E.01949
G1 X183.94 Y173.095 E.23405
G1 X183.364 Y173.095 E.01949
G1 X178.475 Y168.206 E.23405
G1 X177.899 Y168.206 E.01949
G1 X182.789 Y173.095 E.23405
G1 X182.213 Y173.095 E.01949
G1 X177.324 Y168.206 E.23405
G1 X176.748 Y168.206 E.01949
G1 X181.637 Y173.095 E.23405
G1 X181.062 Y173.095 E.01949
G1 X176.172 Y168.206 E.23405
G1 X176 Y168.206 E.00585
G1 X176 Y168.609 E.01364
G1 X180.486 Y173.095 E.21476
G1 X179.91 Y173.095 E.01949
G1 X176 Y169.184 E.1872
G1 X176 Y169.76 E.01949
G1 X179.334 Y173.095 E.15964
G1 X178.759 Y173.095 E.01949
G1 X176 Y170.336 E.13208
G1 X176 Y170.911 E.01949
G1 X178.183 Y173.095 E.10452
G1 X177.607 Y173.095 E.01949
G1 X176 Y171.487 E.07696
G1 X176 Y172.063 E.01949
G1 X177.215 Y173.278 E.05818
;PATH_TASK id=2005 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
G1 X176.66 Y173.298 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.449968
G1 F2161
G1 X175.857 Y172.496 E.03841
;PATH_TASK id=2006 conformal=0 surface=-1 source_layer=16 shell_offset=-1.000000
G1 X183.873 Y169.192 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.58228
G1 F2161
M73 P90 R3
G1 X183.873 Y168.272 E.04129
G1 X182.953 Y168.272 E.04129
G1 X183.845 Y169.164 E.0566
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:3.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;3.6
G1 E-.64 F2100
;WIPE_START
G1 F8343.222
G1 X183.138 Y168.457 E-.16
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;3.6
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=2007 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
M486 S0
G1 X175.654 Y174.114 Z3.6 F24000
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F1787
G1 X175.654 Y152.154 E.74335
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y174.114 E.74335
G1 X175.694 Y174.114 E.29289
;PATH_TASK id=2008 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
M204 T2500
G1 X175.694 Y174.157 F24000
G1 X175.611 Y174.157
G1 X175.611 Y174.157
G1 X175.225 Y174.543
M204 P2500
;TYPE:Outer wall
G1 F1787
G1 X175.225 Y151.725 E.77236
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y174.543 E.77236
G1 X175.265 Y174.543 E.3219
;PATH_TASK id=2009 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X175.263 Y173.543 E-.16
;WIPE_END
G1 X176.04 Y173.543 F24000
G1 X176.04 Y169.151
G1 X176.877 Y167.887
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.453636
G1 F1787
G1 X183.083 Y167.887 E.21197
;PATH_TASK id=2010 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X176.468 Y168.296 F24000
;WIDTH:0.449999
G1 F1787
G1 X183.532 Y168.296 E.23913
G1 X183.532 Y167.478 E.02768
G1 X176.468 Y167.478 E.23913
G1 X176.468 Y168.256 E.02633
;PATH_TASK id=2011 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X176.061 Y168.703 F24000
G1 F1787
G1 X183.939 Y168.703 E.26669
G1 X183.939 Y167.071 E.05524
G1 X176.061 Y167.071 E.26669
G1 X176.061 Y168.663 E.05389
;PATH_TASK id=2012 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X179.033 Y166.387 F24000
;TYPE:Sparse infill
;WIDTH:0.45
G1 F1787
G1 X177.033 Y166.387 E.0677
G1 X176.756 Y166.664 E.01327
G1 X180.901 Y166.664 E.1403
G1 X181.178 Y166.387 E.01327
G1 X183.178 Y166.387 E.0677
;PATH_TASK id=2013 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F11054.348
G1 X182.178 Y166.387 E-.16
;WIPE_END
G1 X184.185 Y173.182 F24000
G1 E.8 F1800
M204 P1500
;TYPE:Top surface
;WIDTH:0.423998
G1 F1787
G1 X183.414 Y173.953 E.03454
;PATH_TASK id=2014 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X182.875 Y173.953 F24000
G1 F1787
G1 X184.185 Y172.643 E.05869
;PATH_TASK id=2015 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X184.185 Y172.105 F24000
G1 F1787
G1 X182.337 Y173.953 E.08284
;PATH_TASK id=2016 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X181.798 Y173.953 F24000
G1 F1787
G1 X184.185 Y171.566 E.10699
;PATH_TASK id=2017 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X184.185 Y171.027 F24000
G1 F1787
G1 X181.259 Y173.953 E.13114
;PATH_TASK id=2018 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X180.72 Y173.953 F24000
G1 F1787
G1 X184.185 Y170.488 E.15529
;PATH_TASK id=2019 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X184.185 Y169.949 F24000
G1 F1787
G1 X180.181 Y173.953 E.17944
;PATH_TASK id=2020 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X179.642 Y173.953 F24000
G1 F1787
G1 X184.185 Y169.41 E.20359
;PATH_TASK id=2021 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X184.13 Y168.926 F24000
G1 F1787
G1 X179.103 Y173.953 E.22529
;PATH_TASK id=2022 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X178.564 Y173.953 F24000
G1 F1787
G1 X183.592 Y168.926 E.22529
;PATH_TASK id=2023 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X183.053 Y168.926 F24000
G1 F1787
G1 X178.025 Y173.953 E.22529
;PATH_TASK id=2024 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X177.486 Y173.953 F24000
G1 F1787
G1 X182.514 Y168.926 E.22529
;PATH_TASK id=2025 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X181.975 Y168.926 F24000
G1 F1787
G1 X176.947 Y173.953 E.22529
;PATH_TASK id=2026 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X176.408 Y173.953 F24000
G1 F1787
G1 X181.436 Y168.926 E.22529
;PATH_TASK id=2027 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X180.897 Y168.926 F24000
G1 F1787
G1 X175.869 Y173.953 E.22529
;PATH_TASK id=2028 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X175.815 Y173.469 F24000
G1 F1787
G1 X180.358 Y168.926 E.20359
;PATH_TASK id=2029 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X179.819 Y168.926 F24000
G1 F1787
G1 X175.815 Y172.93 E.17943
;PATH_TASK id=2030 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X175.815 Y172.391 F24000
G1 F1787
G1 X179.28 Y168.926 E.15528
;PATH_TASK id=2031 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X178.741 Y168.926 F24000
G1 F1787
G1 X175.815 Y171.852 E.13113
;PATH_TASK id=2032 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X175.815 Y171.313 F24000
G1 F1787
G1 X178.202 Y168.926 E.10698
;PATH_TASK id=2033 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X177.663 Y168.926 F24000
G1 F1787
G1 X175.815 Y170.774 E.08283
;PATH_TASK id=2034 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X175.815 Y170.235 F24000
G1 F1787
G1 X177.124 Y168.926 E.05868
;PATH_TASK id=2035 conformal=0 surface=-1 source_layer=17 shell_offset=-1.000000
G1 X176.585 Y168.926 F24000
G1 F1787
G1 X175.815 Y169.696 E.03453
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:3.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;3.8
G1 E-.64 F2100
;WIPE_START
G1 F6000
G1 X176.522 Y168.989 E-.16
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;3.8
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=2036 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
M486 S0
G1 X175.654 Y169.723 Z3.8 F24000
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F1509
G1 X175.654 Y152.154 E.5947
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y169.723 E.5947
G1 X175.694 Y169.723 E.29289
;PATH_TASK id=2037 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
M204 T2500
G1 X175.694 Y169.766 F24000
G1 X175.611 Y169.766
G1 X175.225 Y170.151
M204 P2500
;TYPE:Outer wall
G1 F1509
G1 X175.225 Y151.725 E.62371
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y170.151 E.62371
G1 X175.265 Y170.151 E.3219
;PATH_TASK id=2038 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X175.263 Y169.151 E-.16
;WIPE_END
G1 X175.611 Y169.151 F24000
G1 X176.877 Y166.753
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.453638
G1 F1509
G1 X183.083 Y166.753 E.21197
;PATH_TASK id=2039 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
G1 X176.468 Y167.162 F24000
;WIDTH:0.449999
G1 F1509
G1 X183.532 Y167.162 E.23913
G1 X183.532 Y166.344 E.02768
G1 X176.468 Y166.344 E.23913
G1 X176.468 Y167.122 E.02633
;PATH_TASK id=2040 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
G1 X176.061 Y167.569 F24000
G1 F1509
G1 X183.939 Y167.569 E.26669
G1 X183.939 Y165.937 E.05524
G1 X176.061 Y165.937 E.26669
G1 X176.061 Y167.529 E.05389
;PATH_TASK id=2041 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
G1 X176 Y161.275 F24000
;TYPE:Sparse infill
;WIDTH:0.45
;HEIGHT:0.4
G1 F1509
G1 X176 Y163.275 E.12112
G1 X184 Y155.274 E.68523
G1 X184 Y159.419 E.25102
G1 X177.89 Y165.53 E.52333
G1 X182.035 Y165.53 E.25102
G1 X184 Y163.564 E.16833
G1 X184 Y161.564 E.12112
;PATH_TASK id=2042 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
G1 X184.185 Y168.56 F24000
M204 P1500
;TYPE:Top surface
;WIDTH:0.423113
;HEIGHT:0.2
G1 F1509
G1 X183.416 Y167.791 E.03437
;PATH_TASK id=2043 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
G1 X182.879 Y167.791 F24000
G1 F1509
G1 X184.185 Y169.098 E.05841
;PATH_TASK id=2044 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
G1 X184.111 Y169.562 F24000
G1 F1509
G1 X182.341 Y167.791 E.07914
;PATH_TASK id=2045 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
G1 X181.803 Y167.791 F24000
G1 F1509
G1 X183.573 Y169.562 E.07914
;PATH_TASK id=2046 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
G1 X183.036 Y169.562 F24000
G1 F1509
G1 X181.266 Y167.791 E.07914
;PATH_TASK id=2047 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
G1 X180.728 Y167.791 F24000
G1 F1509
G1 X182.498 Y169.562 E.07914
;PATH_TASK id=2048 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
G1 X181.96 Y169.562 F24000
G1 F1509
G1 X180.19 Y167.791 E.07914
;PATH_TASK id=2049 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
G1 X179.653 Y167.791 F24000
G1 F1509
G1 X181.423 Y169.562 E.07914
;PATH_TASK id=2050 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
G1 X180.885 Y169.562 F24000
G1 F1509
G1 X179.115 Y167.791 E.07914
;PATH_TASK id=2051 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
G1 X178.577 Y167.791 F24000
G1 F1509
G1 X180.347 Y169.562 E.07914
;PATH_TASK id=2052 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
G1 X179.81 Y169.562 F24000
G1 F1509
G1 X178.04 Y167.791 E.07914
;PATH_TASK id=2053 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
G1 X177.502 Y167.791 F24000
G1 F1509
G1 X179.272 Y169.562 E.07914
;PATH_TASK id=2054 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
G1 X178.734 Y169.562 F24000
G1 F1509
G1 X176.964 Y167.791 E.07914
;PATH_TASK id=2055 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
G1 X176.427 Y167.791 F24000
M73 P91 R3
G1 F1509
G1 X178.197 Y169.562 E.07914
;PATH_TASK id=2056 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
G1 X177.659 Y169.562 F24000
G1 F1509
G1 X175.889 Y167.791 E.07914
;PATH_TASK id=2057 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
G1 X175.815 Y168.255 F24000
G1 F1509
G1 X177.121 Y169.562 E.05841
;PATH_TASK id=2058 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
G1 X176.584 Y169.562 F24000
G1 F1509
G1 X175.815 Y168.793 E.03437
;PATH_TASK id=2059 conformal=0 surface=-1 source_layer=18 shell_offset=-1.000000
G1 X176.485 Y152.5 F24000
M204 P4000
;TYPE:Sparse infill
;WIDTH:0.45
;HEIGHT:0.4
G1 F1509
G1 X178.485 Y152.5 E.12112
G1 X176 Y154.985 E.21289
G1 X176 Y159.13 E.25102
G1 X182.63 Y152.5 E.56789
G1 X184 Y152.5 E.08297
G1 X184 Y153.129 E.03815
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;4
G1 E-.64 F2100
;WIPE_START
G1 F6178.615
G1 X184 Y152.5 E-.10078
G1 X183.63 Y152.5 E-.05922
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;4
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=2060 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
M486 S0
G1 X175.654 Y168.589 Z4 F24000
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F1351
G1 X175.654 Y152.154 E.55631
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y168.589 E.55631
G1 X175.694 Y168.589 E.29289
;PATH_TASK id=2061 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
M204 T2500
G1 X175.694 Y168.631 F24000
G1 X175.611 Y168.631
G1 X175.611 Y168.632
G1 X175.225 Y169.017
M204 P2500
;TYPE:Outer wall
G1 F1351
G1 X175.225 Y151.725 E.58532
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y169.017 E.58532
G1 X175.265 Y169.017 E.3219
;PATH_TASK id=2062 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X175.263 Y168.017 E-.16
;WIPE_END
G1 X175.611 Y168.017 F24000
G1 X175.611 Y160.868
G1 X176.407 Y160.868
G1 E.8 F1800
M204 P4000
;TYPE:Sparse infill
;WIDTH:0.45
G1 F1351
G1 X176.407 Y162.868 E.0677
G1 X178.759 Y160.515 E.11263
G1 X178.939 Y160.695 E.00858
G1 X180.848 Y158.786 E.09139
G1 X182.741 Y160.679 E.09063
G1 X179.024 Y164.396 E.17793
G1 X183.169 Y164.396 E.1403
G1 X183.593 Y163.972 E.0203
G1 X183.593 Y161.972 E.0677
;PATH_TASK id=2063 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
G1 X183.969 Y164.629 F24000
;TYPE:Internal solid infill
;WIDTH:0.388957
G1 F1351
G1 X183.97 Y159.995 E.13334
;PATH_TASK id=2064 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
G1 X176.061 Y166.435 F24000
;WIDTH:0.449787
G1 F1351
G1 X183.939 Y166.435 E.26655
G3 X183.942 Y164.945 I169.689 J-.408 E.05039
;PATH_TASK id=2065 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
;WIDTH:0.430956
G1 X183.955 Y164.787 E.00511
;PATH_TASK id=2066 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
;WIDTH:0.412626
G1 X183.969 Y164.629 E.00487
G1 X183.797 Y164.8 E.00744
;PATH_TASK id=2067 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
;WIDTH:0.449475
G3 X176.203 Y164.8 I-3.797 J-788.399 E.25671
;PATH_TASK id=2068 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
;WIDTH:0.430957
G1 X176.117 Y164.715 E.0039
;PATH_TASK id=2069 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
;WIDTH:0.419029
G1 X176.031 Y164.629 E.00378
G1 X176.061 Y165.619 E.03096
;PATH_TASK id=2070 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
;WIDTH:0.449999
G1 X176.061 Y166.395 E.02627
;PATH_TASK id=2071 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
G1 X176.468 Y166.028 F24000
G1 F1351
G1 X183.532 Y166.028 E.23913
G1 X183.532 Y165.21 E.02768
G1 X176.468 Y165.21 E.23913
G1 X176.468 Y165.988 E.02633
;PATH_TASK id=2072 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
G1 X176.877 Y165.619 F24000
;WIDTH:0.45366
G1 F1351
G1 X183.083 Y165.619 E.21198
;PATH_TASK id=2073 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
G1 X176.03 Y158.674 F24000
;WIDTH:0.388944
G1 F1351
G1 X176.03 Y164.589 E.1702
;PATH_TASK id=2074 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
G1 X184.185 Y167.658 F24000
M204 P1500
;TYPE:Top surface
;WIDTH:0.423113
G1 F1351
G1 X183.416 Y168.427 E.03437
;PATH_TASK id=2075 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
G1 X182.879 Y168.427 F24000
G1 F1351
G1 X184.185 Y167.121 E.05841
;PATH_TASK id=2076 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
G1 X184.111 Y166.657 F24000
G1 F1351
G1 X182.341 Y168.427 E.07914
;PATH_TASK id=2077 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
G1 X181.803 Y168.427 F24000
G1 F1351
G1 X183.573 Y166.657 E.07914
;PATH_TASK id=2078 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
G1 X183.036 Y166.657 F24000
G1 F1351
G1 X181.266 Y168.427 E.07914
;PATH_TASK id=2079 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
G1 X180.728 Y168.427 F24000
G1 F1351
G1 X182.498 Y166.657 E.07914
;PATH_TASK id=2080 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
G1 X181.96 Y166.657 F24000
G1 F1351
G1 X180.19 Y168.427 E.07914
;PATH_TASK id=2081 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
G1 X179.653 Y168.427 F24000
G1 F1351
G1 X181.423 Y166.657 E.07914
;PATH_TASK id=2082 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
G1 X180.885 Y166.657 F24000
G1 F1351
G1 X179.115 Y168.427 E.07914
;PATH_TASK id=2083 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
G1 X178.577 Y168.427 F24000
G1 F1351
G1 X180.347 Y166.657 E.07914
;PATH_TASK id=2084 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
G1 X179.81 Y166.657 F24000
G1 F1351
G1 X178.04 Y168.427 E.07914
;PATH_TASK id=2085 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
G1 X177.502 Y168.427 F24000
G1 F1351
G1 X179.272 Y166.657 E.07914
;PATH_TASK id=2086 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
G1 X178.734 Y166.657 F24000
G1 F1351
G1 X176.964 Y168.427 E.07914
;PATH_TASK id=2087 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
G1 X176.427 Y168.427 F24000
G1 F1351
G1 X178.197 Y166.657 E.07914
;PATH_TASK id=2088 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
G1 X177.659 Y166.657 F24000
G1 F1351
G1 X175.889 Y168.427 E.07914
;PATH_TASK id=2089 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
G1 X175.815 Y167.964 F24000
G1 F1351
G1 X177.121 Y166.657 E.05841
;PATH_TASK id=2090 conformal=0 surface=-1 source_layer=19 shell_offset=-1.000000
G1 X176.584 Y166.657 F24000
G1 F1351
G1 X175.815 Y167.426 E.03437
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:4.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;4.2
G1 E-.64 F2100
;WIPE_START
G1 F6000
G1 X176.522 Y166.719 E-.16
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;4.2
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=2091 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000
M486 S0
G1 X175.654 Y167.454 Z4.2 F24000
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F1794
G1 X175.654 Y152.154 E.51791
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y167.454 E.51791
G1 X175.694 Y167.454 E.29289
;PATH_TASK id=2092 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000
M204 T2500
G1 X175.694 Y167.497 F24000
G1 X175.611 Y167.497
G1 X175.225 Y167.883
M204 P2500
;TYPE:Outer wall
G1 F1794
G1 X175.225 Y151.725 E.54692
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y167.883 E.54692
G1 X175.265 Y167.883 E.3219
;PATH_TASK id=2093 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X175.263 Y166.883 E-.16
;WIPE_END
G1 X176.04 Y166.883 F24000
G1 X176.04 Y165.748
G1 X176.169 Y165.748
G1 X176.169 Y165.389
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.38292
G1 F1794
G1 X183.791 Y165.389 E.21547
;PATH_TASK id=2094 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000
G1 X184.185 Y166.292 F24000
M204 P1500
;TYPE:Top surface
;WIDTH:0.423113
G1 F1794
G1 X183.416 Y165.523 E.03437
;PATH_TASK id=2095 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000
G1 X182.879 Y165.523 F24000
G1 F1794
G1 X184.185 Y166.829 E.05841
;PATH_TASK id=2096 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000
G1 X184.111 Y167.293 F24000
G1 F1794
G1 X182.341 Y165.523 E.07914
;PATH_TASK id=2097 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000
G1 X181.803 Y165.523 F24000
G1 F1794
G1 X183.573 Y167.293 E.07914
;PATH_TASK id=2098 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000
G1 X183.036 Y167.293 F24000
G1 F1794
G1 X181.266 Y165.523 E.07914
;PATH_TASK id=2099 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000
G1 X180.728 Y165.523 F24000
G1 F1794
G1 X182.498 Y167.293 E.07914
;PATH_TASK id=2100 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000
G1 X181.96 Y167.293 F24000
G1 F1794
G1 X180.19 Y165.523 E.07914
;PATH_TASK id=2101 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000
G1 X179.653 Y165.523 F24000
G1 F1794
G1 X181.423 Y167.293 E.07914
;PATH_TASK id=2102 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000
G1 X180.885 Y167.293 F24000
G1 F1794
G1 X179.115 Y165.523 E.07914
;PATH_TASK id=2103 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000
G1 X178.577 Y165.523 F24000
G1 F1794
G1 X180.347 Y167.293 E.07914
;PATH_TASK id=2104 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000
G1 X179.81 Y167.293 F24000
G1 F1794
G1 X178.04 Y165.523 E.07914
;PATH_TASK id=2105 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000
G1 X177.502 Y165.523 F24000
G1 F1794
G1 X179.272 Y167.293 E.07914
;PATH_TASK id=2106 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000
G1 X178.734 Y167.293 F24000
G1 F1794
G1 X176.964 Y165.523 E.07914
;PATH_TASK id=2107 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000
G1 X176.427 Y165.523 F24000
G1 F1794
G1 X178.197 Y167.293 E.07914
;PATH_TASK id=2108 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000
G1 X177.659 Y167.293 F24000
G1 F1794
G1 X175.889 Y165.523 E.07914
;PATH_TASK id=2109 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000
G1 X175.815 Y165.987 F24000
G1 F1794
G1 X177.121 Y167.293 E.05841
;PATH_TASK id=2110 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000
G1 X176.584 Y167.293 F24000
G1 F1794
G1 X175.815 Y166.524 E.03437
;PATH_TASK id=2111 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000
G1 X175.819 Y164.682 F24000
;TYPE:Internal Bridge
;WIDTH:0.4
;HEIGHT:0.4
G1 F1794
G1 X176.186 Y165.049 E.02717
G1 X176.823 Y165.049 E.03325
G1 X176.021 Y164.248 E.05923
G1 X176.021 Y163.611 E.03325
G1 X177.459 Y165.049 E.10625
G1 X178.095 Y165.049 E.03325
G1 X176.021 Y162.975 E.15327
G1 X176.021 Y162.338 E.03325
G1 X178.732 Y165.049 E.20029
G1 X179.368 Y165.049 E.03325
G1 X176.021 Y161.702 E.24731
G1 X176.021 Y161.066 E.03325
G1 X180.005 Y165.049 E.29433
G1 X180.641 Y165.049 E.03325
G1 X176.021 Y160.429 E.34135
G1 X176.021 Y159.793 E.03325
G1 X181.277 Y165.049 E.38837
G1 X181.914 Y165.049 E.03325
G1 X176.021 Y159.156 E.43539
G1 X176.021 Y158.728 E.0224
G1 X176.177 Y158.706 E.00821
G1 X176.192 Y158.691 E.00111
G1 X182.55 Y165.049 E.4698
G1 X183.187 Y165.049 E.03325
G1 X176.51 Y158.373 E.49331
G1 X176.828 Y158.054 E.02351
G1 X183.823 Y165.049 E.51682
G1 X183.979 Y165.057 E.00816
G1 X183.979 Y164.569 E.02548
G1 X179.219 Y159.809 E.35171
G1 X179.537 Y159.49 E.02351
G1 X183.979 Y163.932 E.3282
G1 X183.979 Y163.296 E.03325
G1 X179.855 Y159.172 E.30469
G1 X180.173 Y158.854 E.02351
G1 X183.979 Y162.66 E.28118
G1 X183.979 Y162.023 E.03325
G1 X180.492 Y158.536 E.25767
G1 X180.81 Y158.218 E.02351
G1 X183.979 Y161.387 E.23416
G1 X183.979 Y160.75 E.03325
G1 X183.2 Y159.972 E.05752
G1 X183.519 Y159.654 E.02351
G1 X184.181 Y160.317 E.04897
;PATH_TASK id=2112 conformal=0 surface=-1 source_layer=20 shell_offset=-1.000000
G1 X184 Y157.274 F24000
M204 P4000
;TYPE:Sparse infill
;WIDTH:0.45
G1 F1794
M106 S255
G1 X184 Y155.274 E.12112
G1 X181.275 Y158 E.23345
G1 X180.848 Y157.573 E.03655
G1 X178.939 Y159.483 E.16351
G1 X177.293 Y157.837 E.14095
G1 X182.63 Y152.5 E.45712
G1 X178.485 Y152.5 E.25102
G1 X176 Y154.985 E.21289
G1 X176 Y156.985 E.12112
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:4.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;4.4
G1 E-.64 F2100
;WIPE_START
G1 F6178.615
G1 X176 Y155.985 E-.16
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;4.4
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=2113 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
M486 S0
G1 X175.654 Y166.32 Z4.4 F24000
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F1432
G1 X175.654 Y152.154 E.47952
G1 X184.346 Y152.154 E.29424
M73 P92 R3
G1 X184.346 Y166.32 E.47952
G1 X175.694 Y166.32 E.29289
;PATH_TASK id=2114 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
M204 T2500
G1 X175.694 Y166.363 F24000
G1 X175.611 Y166.363
G1 X175.225 Y166.749
M204 P2500
;TYPE:Outer wall
G1 F1432
G1 X175.225 Y151.725 E.50853
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y166.749 E.50853
G1 X175.265 Y166.749 E.3219
;PATH_TASK id=2115 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X175.262 Y165.749 E-.16
;WIPE_END
G1 X175.611 Y165.749 F24000
G1 X175.611 Y159.781
G1 X176.137 Y159.781
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.539932
G1 F1432
G1 X176.075 Y159.781 E.00257
G1 X176.043 Y159.835 E.00257
G1 X176.075 Y159.888 E.00257
G1 X176.137 Y159.888 E.00257
G1 X176.148 Y159.869 E.00091
;PATH_TASK id=2116 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
G1 X182.941 Y164.098 F24000
;WIDTH:0.5873
G1 F1432
G1 X183.871 Y164.098 E.04207
G1 X183.871 Y163.168 E.04207
G1 X182.97 Y164.069 E.05768
;PATH_TASK id=2117 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
G1 X184.185 Y165.39 F24000
M204 P1500
;TYPE:Top surface
;WIDTH:0.423113
G1 F1432
G1 X183.416 Y166.159 E.03437
;PATH_TASK id=2118 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
G1 X182.879 Y166.159 F24000
G1 F1432
G1 X184.185 Y164.852 E.05841
;PATH_TASK id=2119 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
G1 X184.111 Y164.389 F24000
G1 F1432
G1 X182.341 Y166.159 E.07914
;PATH_TASK id=2120 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
G1 X181.803 Y166.159 F24000
G1 F1432
G1 X183.573 Y164.389 E.07914
;PATH_TASK id=2121 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
G1 X183.036 Y164.389 F24000
G1 F1432
G1 X181.266 Y166.159 E.07914
;PATH_TASK id=2122 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
G1 X180.728 Y166.159 F24000
G1 F1432
G1 X182.498 Y164.389 E.07914
;PATH_TASK id=2123 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
G1 X181.96 Y164.389 F24000
G1 F1432
G1 X180.19 Y166.159 E.07914
;PATH_TASK id=2124 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
G1 X179.653 Y166.159 F24000
G1 F1432
G1 X181.423 Y164.389 E.07914
;PATH_TASK id=2125 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
G1 X180.885 Y164.389 F24000
G1 F1432
G1 X179.115 Y166.159 E.07914
;PATH_TASK id=2126 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
G1 X178.577 Y166.159 F24000
G1 F1432
G1 X180.347 Y164.389 E.07914
;PATH_TASK id=2127 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
G1 X179.81 Y164.389 F24000
G1 F1432
G1 X178.04 Y166.159 E.07914
;PATH_TASK id=2128 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
G1 X177.502 Y166.159 F24000
G1 F1432
G1 X179.272 Y164.389 E.07914
;PATH_TASK id=2129 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
G1 X178.734 Y164.389 F24000
G1 F1432
G1 X176.964 Y166.159 E.07914
;PATH_TASK id=2130 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
G1 X176.427 Y166.159 F24000
G1 F1432
G1 X178.197 Y164.389 E.07914
;PATH_TASK id=2131 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
G1 X177.659 Y164.389 F24000
G1 F1432
G1 X175.889 Y166.159 E.07914
;PATH_TASK id=2132 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
G1 X175.815 Y165.695 F24000
G1 F1432
G1 X177.121 Y164.389 E.05841
;PATH_TASK id=2133 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
G1 X176.584 Y164.389 F24000
G1 F1432
G1 X175.815 Y165.157 E.03437
;PATH_TASK id=2134 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
G1 X184.184 Y162.47 F24000
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.449999
G1 F1432
G1 X182.488 Y164.166 E.08118
G1 X181.912 Y164.166 E.01949
G1 X184 Y162.078 E.09997
G1 X184 Y161.502 E.01949
G1 X181.336 Y164.166 E.12753
G1 X180.761 Y164.166 E.01949
G1 X184 Y160.926 E.15508
G1 X184 Y160.351 E.01949
G1 X180.185 Y164.166 E.18264
G1 X179.609 Y164.166 E.01949
G1 X183.986 Y159.79 E.20951
G1 X183.41 Y159.79 E.01949
G1 X179.034 Y164.166 E.20951
G1 X178.458 Y164.166 E.01949
G1 X182.835 Y159.79 E.20951
G1 X182.259 Y159.79 E.01949
G1 X177.882 Y164.166 E.20951
G1 X177.307 Y164.166 E.01949
G1 X181.683 Y159.79 E.20951
G1 X181.107 Y159.79 E.01949
G1 X176.731 Y164.166 E.20951
G1 X176.155 Y164.166 E.01949
G1 X180.532 Y159.79 E.20951
G1 X179.956 Y159.79 E.01949
G1 X176 Y163.746 E.1894
G1 X176 Y163.17 E.01949
G1 X179.38 Y159.79 E.16184
G1 X178.805 Y159.79 E.01949
G1 X176 Y162.595 E.13428
G1 X176 Y162.019 E.01949
G1 X178.229 Y159.79 E.10672
G1 X177.653 Y159.79 E.01949
G1 X176 Y161.443 E.07916
G1 X176 Y160.868 E.01949
G1 X177.261 Y159.606 E.06038
;PATH_TASK id=2135 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
G1 X176.705 Y159.586 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.449967
G1 F1432
G1 X175.857 Y160.434 E.04061
;PATH_TASK id=2136 conformal=0 surface=-1 source_layer=21 shell_offset=-1.000000
G1 X175.909 Y163.929 F24000
;WIDTH:0.110803
G1 F1432
G1 X175.861 Y164.37 E.0025
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:4.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;4.6
G1 E-.67065 F2100
;WIPE_START
G1 F7200
G1 X175.909 Y163.929 E-.12935
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;4.6
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=2137 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
M486 S0
G1 X175.654 Y165.186 Z4.6 F24000
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F1560
G1 X175.654 Y152.154 E.44113
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y165.186 E.44113
G1 X175.694 Y165.186 E.29289
;PATH_TASK id=2138 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
M204 T2500
G1 X175.694 Y165.229 F24000
G1 X175.611 Y165.229
G1 X175.611 Y165.229
G1 X175.225 Y165.614
M204 P2500
;TYPE:Outer wall
G1 F1560
G1 X175.225 Y151.725 E.47014
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y165.614 E.47014
G1 X175.265 Y165.614 E.3219
;PATH_TASK id=2139 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X175.262 Y164.614 E-.16
;WIPE_END
G1 X175.611 Y164.614 F24000
G1 X175.611 Y162.95
G1 X176.122 Y162.95
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.513012
G1 F1560
G2 X176.122 Y163.051 I-.029 J.051 E.00962
G1 X176.131 Y163.035 E.00073
;PATH_TASK id=2140 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
G1 X181.868 Y158.657 F24000
;WIDTH:0.45
G1 F1560
G1 X184 Y160.79 E.10207
G1 X184 Y161.365 E.01949
G1 X181.476 Y158.84 E.12086
G1 X180.9 Y158.84 E.01949
G1 X184 Y161.941 E.14842
G1 X184 Y162.517 E.01949
G1 X180.324 Y158.84 E.17598
G1 X179.749 Y158.84 E.01949
M73 P92 R2
G1 X183.94 Y163.032 E.20064
G1 X183.364 Y163.032 E.01949
G1 X179.173 Y158.84 E.20064
G1 X178.597 Y158.84 E.01949
G1 X182.789 Y163.032 E.20064
G1 X182.213 Y163.032 E.01949
G1 X178.021 Y158.84 E.20064
G1 X177.446 Y158.84 E.01949
G1 X181.637 Y163.032 E.20064
G1 X181.062 Y163.032 E.01949
G1 X176.87 Y158.84 E.20064
G1 X176.294 Y158.84 E.01949
G1 X180.486 Y163.032 E.20064
G1 X179.91 Y163.032 E.01949
G1 X176 Y159.121 E.1872
G1 X176 Y159.697 E.01949
G1 X179.334 Y163.032 E.15964
G1 X178.759 Y163.032 E.01949
G1 X176 Y160.273 E.13208
G1 X176 Y160.848 E.01949
G1 X178.183 Y163.032 E.10452
G1 X177.607 Y163.032 E.01949
G1 X176 Y161.424 E.07696
G1 X176 Y162 E.01949
G1 X177.215 Y163.215 E.05817
;PATH_TASK id=2141 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
G1 X176.66 Y163.236 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.449952
G1 F1560
G1 X175.857 Y162.433 E.03841
;PATH_TASK id=2142 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
G1 X182.842 Y158.433 F24000
M204 P4000
;TYPE:Sparse infill
;WIDTH:0.45
;HEIGHT:0.4
G1 F1560
G1 X180.842 Y158.433 E.12112
G1 X184 Y155.274 E.27055
G1 X184 Y152.5 E.16805
G1 X182.63 Y152.5 E.08297
G1 X176.696 Y158.433 E.5082
G1 X176 Y158.433 E.04221
G1 X176 Y154.985 E.20882
G1 X178.485 Y152.5 E.21289
G1 X176.485 Y152.5 E.12112
;PATH_TASK id=2143 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
G1 X183.939 Y160.441 F24000
;TYPE:Internal solid infill
;WIDTH:0.449999
;HEIGHT:0.2
G1 F1560
G1 X183.939 Y158.84 E.05416
G1 X182.339 Y158.84 E.05416
G1 X183.911 Y160.412 E.07524
;PATH_TASK id=2144 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
G1 X183.504 Y159.252 F24000
;WIDTH:0.573194
G1 F1560
G1 X183.438 Y159.252 E.00292
G1 X183.404 Y159.309 E.00292
G1 X183.438 Y159.367 E.00292
G1 X183.504 Y159.367 E.00292
G1 X183.517 Y159.344 E.00116
;PATH_TASK id=2145 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
G1 X184.185 Y164.023 F24000
M204 P1500
;TYPE:Top surface
;WIDTH:0.423113
G1 F1560
G1 X183.416 Y163.254 E.03437
;PATH_TASK id=2146 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
G1 X182.879 Y163.254 F24000
G1 F1560
G1 X184.185 Y164.561 E.05841
;PATH_TASK id=2147 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
G1 X184.111 Y165.024 F24000
G1 F1560
G1 X182.341 Y163.254 E.07914
;PATH_TASK id=2148 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
G1 X181.803 Y163.254 F24000
G1 F1560
G1 X183.573 Y165.024 E.07914
;PATH_TASK id=2149 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
G1 X183.036 Y165.024 F24000
G1 F1560
G1 X181.266 Y163.254 E.07914
;PATH_TASK id=2150 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
G1 X180.728 Y163.254 F24000
G1 F1560
G1 X182.498 Y165.024 E.07914
;PATH_TASK id=2151 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
G1 X181.96 Y165.024 F24000
G1 F1560
G1 X180.19 Y163.254 E.07914
;PATH_TASK id=2152 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
G1 X179.653 Y163.254 F24000
G1 F1560
G1 X181.423 Y165.024 E.07914
;PATH_TASK id=2153 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
G1 X180.885 Y165.024 F24000
G1 F1560
G1 X179.115 Y163.254 E.07914
;PATH_TASK id=2154 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
G1 X178.577 Y163.254 F24000
G1 F1560
G1 X180.347 Y165.024 E.07914
;PATH_TASK id=2155 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
G1 X179.81 Y165.024 F24000
G1 F1560
G1 X178.04 Y163.254 E.07914
;PATH_TASK id=2156 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
G1 X177.502 Y163.254 F24000
G1 F1560
G1 X179.272 Y165.024 E.07914
;PATH_TASK id=2157 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
G1 X178.734 Y165.024 F24000
G1 F1560
G1 X176.964 Y163.254 E.07914
;PATH_TASK id=2158 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
G1 X176.427 Y163.254 F24000
G1 F1560
G1 X178.197 Y165.024 E.07914
;PATH_TASK id=2159 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
G1 X177.659 Y165.024 F24000
G1 F1560
G1 X175.889 Y163.254 E.07914
;PATH_TASK id=2160 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
G1 X175.815 Y163.718 F24000
G1 F1560
G1 X177.121 Y165.024 E.05841
;PATH_TASK id=2161 conformal=0 surface=-1 source_layer=22 shell_offset=-1.000000
G1 X176.584 Y165.024 F24000
G1 F1560
G1 X175.815 Y164.256 E.03437
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:4.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;4.8
G1 E-.64 F2100
;WIPE_START
G1 F6000
G1 X176.522 Y164.963 E-.16
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;4.8
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=2162 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
M486 S0
G1 X175.654 Y164.094 Z4.8 F24000
G1 X175.654 Y164.052
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F1375
G1 X175.654 Y152.154 E.40273
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y164.052 E.40273
G1 X175.694 Y164.052 E.29289
;PATH_TASK id=2163 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
M204 T2500
G1 X175.694 Y164.094 F24000
G1 X175.611 Y164.094
G1 X175.225 Y164.48
M204 P2500
;TYPE:Outer wall
G1 F1375
G1 X175.225 Y151.725 E.43174
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y164.48 E.43174
M73 P93 R2
G1 X175.265 Y164.48 E.3219
;PATH_TASK id=2164 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X175.262 Y163.48 E-.16
;WIPE_END
G1 X176.04 Y163.48 F24000
G1 X176.04 Y159.415
G1 X176.061 Y159.415
G1 X176.061 Y158.968
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
G1 F1375
G1 X183.939 Y158.968 E.26669
G1 X183.939 Y157.891 E.03643
G1 X176.061 Y157.891 E.26669
G1 X176.061 Y158.928 E.03508
;PATH_TASK id=2165 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
G1 X176.431 Y158.597 F24000
;WIDTH:0.377571
G1 F1375
G1 X183.569 Y158.597 E.1986
G1 X183.569 Y158.262 E.00931
G1 X176.431 Y158.262 E.1986
G1 X176.431 Y158.557 E.0082
;PATH_TASK id=2166 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F12000
G1 X176.431 Y158.262 E-.04714
G1 X177.137 Y158.262 E-.11286
;WIPE_END
G1 X183.401 Y163.89 F24000
G1 E.8 F1800
M204 P1500
;TYPE:Top surface
;WIDTH:0.43023
G1 F1375
G1 X184.185 Y163.106 E.03571
;PATH_TASK id=2167 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
G1 X184.185 Y162.559 F24000
G1 F1375
G1 X182.853 Y163.89 E.06065
;PATH_TASK id=2168 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
G1 X182.306 Y163.89 F24000
G1 F1375
G1 X184.185 Y162.011 E.0856
;PATH_TASK id=2169 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
G1 X184.185 Y161.463 F24000
G1 F1375
G1 X181.758 Y163.89 E.11055
;PATH_TASK id=2170 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
G1 X181.21 Y163.89 F24000
G1 F1375
G1 X184.185 Y160.915 E.13549
;PATH_TASK id=2171 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
G1 X184.185 Y160.368 F24000
G1 F1375
G1 X180.662 Y163.89 E.16044
;PATH_TASK id=2172 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
G1 X180.115 Y163.89 F24000
G1 F1375
G1 X184.185 Y159.82 E.18539
;PATH_TASK id=2173 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
G1 X184.185 Y159.272 F24000
G1 F1375
G1 X179.567 Y163.89 E.21033
;PATH_TASK id=2174 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
G1 X179.019 Y163.89 F24000
G1 F1375
G1 X183.719 Y159.19 E.21406
;PATH_TASK id=2175 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
G1 X183.172 Y159.19 F24000
G1 F1375
G1 X178.472 Y163.89 E.21406
;PATH_TASK id=2176 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
G1 X177.924 Y163.89 F24000
G1 F1375
G1 X182.624 Y159.19 E.21406
;PATH_TASK id=2177 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
G1 X182.076 Y159.19 F24000
G1 F1375
G1 X177.376 Y163.89 E.21406
;PATH_TASK id=2178 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
G1 X176.828 Y163.89 F24000
G1 F1375
G1 X181.528 Y159.19 E.21406
;PATH_TASK id=2179 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
G1 X180.981 Y159.19 F24000
G1 F1375
G1 X176.281 Y163.89 E.21406
;PATH_TASK id=2180 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
G1 X175.815 Y163.808 F24000
G1 F1375
G1 X180.433 Y159.19 E.21033
;PATH_TASK id=2181 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
G1 X179.885 Y159.19 F24000
G1 F1375
G1 X175.815 Y163.26 E.18538
;PATH_TASK id=2182 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
G1 X175.815 Y162.713 F24000
G1 F1375
G1 X179.337 Y159.19 E.16043
;PATH_TASK id=2183 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
G1 X178.79 Y159.19 F24000
G1 F1375
G1 X175.815 Y162.165 E.13549
;PATH_TASK id=2184 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
G1 X175.815 Y161.617 F24000
G1 F1375
G1 X178.242 Y159.19 E.11054
;PATH_TASK id=2185 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
G1 X177.694 Y159.19 F24000
G1 F1375
G1 X175.815 Y161.069 E.08559
;PATH_TASK id=2186 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
G1 X175.815 Y160.522 F24000
G1 F1375
G1 X177.146 Y159.19 E.06065
;PATH_TASK id=2187 conformal=0 surface=-1 source_layer=23 shell_offset=-1.000000
G1 X176.599 Y159.19 F24000
G1 F1375
G1 X175.815 Y159.974 E.0357
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:5
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;5
G1 E-.64 F2100
;WIPE_START
G1 F6000
G1 X176.522 Y159.267 E-.16
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;5
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=2188 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000
M486 S0
G1 X175.654 Y159.987 Z5 F24000
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F995
G1 X175.654 Y152.154 E.26517
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y159.987 E.26517
G1 X175.694 Y159.987 E.29289
;PATH_TASK id=2189 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000
M204 T2500
G1 X175.694 Y160.03 F24000
G1 X175.611 Y160.03
G1 X175.611 Y160.03
G1 X175.225 Y160.416
M204 P2500
;TYPE:Outer wall
G1 F995
G1 X175.225 Y151.725 E.29418
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y160.416 E.29418
G1 X175.265 Y160.416 E.3219
;PATH_TASK id=2190 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X175.26 Y159.416 E-.16
;WIPE_END
G1 X176.04 Y159.416 F24000
G1 X176.04 Y158.466
G1 X176.061 Y158.466
G1 X176.061 Y158.019
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
G1 F995
G1 X183.939 Y158.019 E.26669
G1 X183.939 Y156.942 E.03643
G1 X176.061 Y156.942 E.26669
G1 X176.061 Y157.979 E.03508
;PATH_TASK id=2191 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000
G1 X176.431 Y157.648 F24000
;WIDTH:0.377573
G1 F995
G1 X183.569 Y157.648 E.1986
G1 X183.569 Y157.313 E.00931
G1 X176.431 Y157.313 E.1986
G1 X176.431 Y157.608 E.0082
;PATH_TASK id=2192 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000
G1 X176.485 Y152.5 F24000
;TYPE:Sparse infill
;WIDTH:0.45
;HEIGHT:0.4
G1 F995
G1 X178.485 Y152.5 E.12112
G1 X176 Y154.985 E.21289
G1 X176 Y156.535 E.09387
G1 X178.595 Y156.535 E.15716
G1 X182.63 Y152.5 E.34564
G1 X184 Y152.5 E.08297
G1 X184 Y155.274 E.16805
G1 X182.74 Y156.535 E.10798
G1 X180.74 Y156.535 E.12112
;PATH_TASK id=2193 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000
G1 X183.387 Y158.241 F24000
M204 P1500
;TYPE:Top surface
;WIDTH:0.43696
;HEIGHT:0.2
G1 F995
G1 X184.185 Y159.039 E.03699
;PATH_TASK id=2194 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000
G1 X184.185 Y159.597 F24000
G1 F995
G1 X182.83 Y158.241 E.06281
;PATH_TASK id=2195 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000
G1 X182.272 Y158.241 F24000
G1 F995
G1 X183.857 Y159.826 E.07344
;PATH_TASK id=2196 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000
G1 X183.3 Y159.826 F24000
G1 F995
G1 X181.715 Y158.241 E.07344
;PATH_TASK id=2197 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000
G1 X181.158 Y158.241 F24000
G1 F995
G1 X182.743 Y159.826 E.07344
;PATH_TASK id=2198 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000
G1 X182.186 Y159.826 F24000
G1 F995
G1 X180.601 Y158.241 E.07344
;PATH_TASK id=2199 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000
G1 X180.043 Y158.241 F24000
G1 F995
G1 X181.628 Y159.826 E.07344
;PATH_TASK id=2200 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000
G1 X181.071 Y159.826 F24000
G1 F995
G1 X179.486 Y158.241 E.07344
;PATH_TASK id=2201 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000
G1 X178.929 Y158.241 F24000
G1 F995
G1 X180.514 Y159.826 E.07344
;PATH_TASK id=2202 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000
G1 X179.957 Y159.826 F24000
G1 F995
G1 X178.372 Y158.241 E.07344
;PATH_TASK id=2203 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000
G1 X177.814 Y158.241 F24000
G1 F995
G1 X179.399 Y159.826 E.07344
;PATH_TASK id=2204 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000
G1 X178.842 Y159.826 F24000
G1 F995
G1 X177.257 Y158.241 E.07344
;PATH_TASK id=2205 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000
G1 X176.7 Y158.241 F24000
G1 F995
G1 X178.285 Y159.826 E.07344
;PATH_TASK id=2206 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000
G1 X177.727 Y159.826 F24000
G1 F995
G1 X176.143 Y158.241 E.07344
;PATH_TASK id=2207 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000
G1 X175.815 Y158.471 F24000
G1 F995
G1 X177.17 Y159.826 E.0628
;PATH_TASK id=2208 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000
G1 X176.613 Y159.826 F24000
G1 F995
G1 X175.815 Y159.028 E.03698
;PATH_TASK id=2209 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000
G1 X176.069 Y158.315 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.16839
G1 F995
G2 X175.918 Y158.283 I-.119 J.189 E.00164
G1 X175.857 Y158.416 E.00152
;PATH_TASK id=2210 conformal=0 surface=-1 source_layer=24 shell_offset=-1.000000
G1 E-.71166 F2100
;WIPE_START
G1 F7200
G1 X175.918 Y158.283 E-.04259
G1 X175.999 Y158.286 E-.02383
G1 X176.069 Y158.315 E-.02191
;WIPE_END
G1 X184.143 Y159.724 F24000
G1 E.8 F1800
;WIDTH:0.111164
G1 F995
G3 X183.956 Y159.727 I-.095 J-.126 E.00113
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:5.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;5.2
G1 E-.74207 F2100
;WIPE_START
G1 F7200
G1 X184.026 Y159.756 E-.02197
G1 X184.066 Y159.756 E-.01157
G1 X184.143 Y159.724 E-.02439
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;5.2
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=2211 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000
M486 S0
G1 X184.143 Y159.081 Z5.2 F24000
G1 X175.654 Y159.081
G1 X175.654 Y159.038
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F900
G1 X175.654 Y152.154 E.23304
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y159.038 E.23304
G1 X175.694 Y159.038 E.29289
;PATH_TASK id=2212 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000
M204 T2500
G1 X175.694 Y159.081 F24000
G1 X175.611 Y159.081
G1 X175.225 Y159.467
M204 P2500
;TYPE:Outer wall
G1 F900
G1 X175.225 Y151.725 E.26205
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y159.467 E.26205
G1 X175.265 Y159.467 E.3219
;PATH_TASK id=2213 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X175.26 Y158.467 E-.16
;WIPE_END
G1 X176.04 Y158.467 F24000
G1 X176.04 Y157.517
G1 X176.061 Y157.517
G1 X176.061 Y157.07
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
G1 F900
G1 X183.939 Y157.07 E.26669
G1 X183.939 Y155.993 E.03643
G1 X176.061 Y155.993 E.26669
G1 X176.061 Y157.03 E.03508
M73 P94 R2
;PATH_TASK id=2214 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000
G1 X176.431 Y156.699 F24000
;WIDTH:0.377572
G1 F900
G1 X183.569 Y156.699 E.1986
G1 X183.569 Y156.364 E.00931
G1 X176.431 Y156.364 E.1986
G1 X176.431 Y156.659 E.0082
;PATH_TASK id=2215 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F12000
G1 X176.431 Y156.364 E-.04714
G1 X177.137 Y156.364 E-.11286
;WIPE_END
G1 X183.387 Y158.877 F24000
G1 E.8 F1800
M204 P1500
;TYPE:Top surface
;WIDTH:0.43696
G1 F900
G1 X184.185 Y158.079 E.03699
;PATH_TASK id=2216 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000
G1 X184.185 Y157.521 F24000
G1 F900
G1 X182.83 Y158.877 E.06281
;PATH_TASK id=2217 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000
G1 X182.272 Y158.877 F24000
G1 F900
G1 X183.857 Y157.292 E.07344
;PATH_TASK id=2218 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000
G1 X183.3 Y157.292 F24000
G1 F900
G1 X181.715 Y158.877 E.07344
;PATH_TASK id=2219 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000
G1 X181.158 Y158.877 F24000
G1 F900
G1 X182.743 Y157.292 E.07344
;PATH_TASK id=2220 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000
G1 X182.186 Y157.292 F24000
G1 F900
G1 X180.601 Y158.877 E.07344
;PATH_TASK id=2221 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000
G1 X180.043 Y158.877 F24000
G1 F900
G1 X181.628 Y157.292 E.07344
;PATH_TASK id=2222 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000
G1 X181.071 Y157.292 F24000
G1 F900
G1 X179.486 Y158.877 E.07344
;PATH_TASK id=2223 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000
G1 X178.929 Y158.877 F24000
G1 F900
G1 X180.514 Y157.292 E.07344
;PATH_TASK id=2224 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000
G1 X179.957 Y157.292 F24000
G1 F900
G1 X178.372 Y158.877 E.07344
;PATH_TASK id=2225 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000
G1 X177.814 Y158.877 F24000
G1 F900
G1 X179.399 Y157.292 E.07344
;PATH_TASK id=2226 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000
G1 X178.842 Y157.292 F24000
G1 F900
G1 X177.257 Y158.877 E.07344
;PATH_TASK id=2227 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000
G1 X176.7 Y158.877 F24000
G1 F900
G1 X178.285 Y157.292 E.07344
;PATH_TASK id=2228 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000
G1 X177.727 Y157.292 F24000
G1 F900
G1 X176.143 Y158.877 E.07344
;PATH_TASK id=2229 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000
G1 X175.815 Y158.647 F24000
G1 F900
G1 X177.17 Y157.292 E.0628
;PATH_TASK id=2230 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000
G1 X176.613 Y157.292 F24000
G1 F900
G1 X175.815 Y158.09 E.03698
;PATH_TASK id=2231 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000
G1 X184.143 Y157.467 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.162143
G1 F900
G1 X184.082 Y157.334 E.00145
G2 X183.931 Y157.366 I-.032 J.221 E.00156
;PATH_TASK id=2232 conformal=0 surface=-1 source_layer=25 shell_offset=-1.000000
G1 E-.71162 F2100
;WIPE_START
G1 F7200
G1 X184.001 Y157.337 E-.02197
G1 X184.082 Y157.334 E-.02383
G1 X184.143 Y157.467 E-.04258
;WIPE_END
G1 X176.043 Y158.778 F24000
G1 E.8 F1800
;WIDTH:0.108332
G1 F900
G3 X175.857 Y158.775 I-.091 J-.13 E.00108
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:5.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;5.4
G1 E-.74212 F2100
;WIPE_START
G1 F7200
G1 X175.934 Y158.807 E-.02437
G1 X175.974 Y158.807 E-.0116
G1 X176.043 Y158.778 E-.02191
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;5.4
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=2233 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000
M486 S0
G1 X176.043 Y158.132 Z5.4 F24000
G1 X175.654 Y158.132
G1 X175.654 Y158.089
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F907
G1 X175.654 Y152.154 E.20092
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y158.089 E.20092
G1 X175.694 Y158.089 E.29289
;PATH_TASK id=2234 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000
M204 T2500
G1 X175.694 Y158.132 F24000
G1 X175.611 Y158.132
G1 X175.225 Y158.518
M204 P2500
;TYPE:Outer wall
G1 F907
G1 X175.225 Y151.725 E.22993
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y158.518 E.22993
G1 X175.265 Y158.518 E.3219
;PATH_TASK id=2235 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X175.259 Y157.518 E-.16
;WIPE_END
G1 X176.04 Y157.518 F24000
G1 X176.04 Y156.568
G1 X176.061 Y156.568
G1 X176.061 Y156.121
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
G1 F907
G1 X183.939 Y156.121 E.26669
G1 X183.939 Y155.044 E.03643
G1 X176.061 Y155.044 E.26669
G1 X176.061 Y156.081 E.03508
;PATH_TASK id=2236 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000
G1 X176.431 Y155.75 F24000
;WIDTH:0.377572
G1 F907
G1 X183.569 Y155.75 E.1986
G1 X183.569 Y155.415 E.00931
G1 X176.431 Y155.415 E.1986
G1 X176.431 Y155.71 E.0082
;PATH_TASK id=2237 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000
G1 X176.157 Y152.5 F24000
;TYPE:Sparse infill
;WIDTH:0.45
;HEIGHT:0.4
G1 F907
G1 X176 Y152.5 E.00955
G1 X176 Y154.342 E.11157
G1 X176.045 Y154.094 E.01528
G1 X176.891 Y153.247 E.07247
G1 X178.964 Y152.867 E.12761
G1 X179.331 Y152.5 E.03149
G1 X183.476 Y152.5 E.25102
G1 X183.109 Y152.867 E.03149
G1 X181.036 Y153.247 E.12761
G1 X180.19 Y154.094 E.07247
G1 X180.09 Y154.637 E.03346
G1 X182.09 Y154.637 E.12112
;PATH_TASK id=2238 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000
G1 X183.387 Y156.343 F24000
M204 P1500
;TYPE:Top surface
;WIDTH:0.43696
;HEIGHT:0.2
G1 F907
G1 X184.185 Y157.141 E.03699
;PATH_TASK id=2239 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000
G1 X184.185 Y157.698 F24000
G1 F907
G1 X182.83 Y156.343 E.06281
;PATH_TASK id=2240 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000
G1 X182.272 Y156.343 F24000
G1 F907
G1 X183.857 Y157.928 E.07344
;PATH_TASK id=2241 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000
G1 X183.3 Y157.928 F24000
G1 F907
G1 X181.715 Y156.343 E.07344
;PATH_TASK id=2242 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000
G1 X181.158 Y156.343 F24000
G1 F907
G1 X182.743 Y157.928 E.07344
;PATH_TASK id=2243 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000
G1 X182.186 Y157.928 F24000
G1 F907
G1 X180.601 Y156.343 E.07344
;PATH_TASK id=2244 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000
G1 X180.043 Y156.343 F24000
G1 F907
G1 X181.628 Y157.928 E.07344
;PATH_TASK id=2245 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000
G1 X181.071 Y157.928 F24000
G1 F907
G1 X179.486 Y156.343 E.07344
;PATH_TASK id=2246 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000
G1 X178.929 Y156.343 F24000
G1 F907
G1 X180.514 Y157.928 E.07344
;PATH_TASK id=2247 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000
G1 X179.957 Y157.928 F24000
G1 F907
G1 X178.372 Y156.343 E.07344
;PATH_TASK id=2248 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000
G1 X177.814 Y156.343 F24000
G1 F907
G1 X179.399 Y157.928 E.07344
;PATH_TASK id=2249 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000
G1 X178.842 Y157.928 F24000
G1 F907
G1 X177.257 Y156.343 E.07344
;PATH_TASK id=2250 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000
G1 X176.7 Y156.343 F24000
G1 F907
G1 X178.285 Y157.928 E.07344
;PATH_TASK id=2251 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000
G1 X177.727 Y157.928 F24000
G1 F907
G1 X176.143 Y156.343 E.07344
;PATH_TASK id=2252 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000
G1 X175.815 Y156.573 F24000
G1 F907
G1 X177.17 Y157.928 E.0628
;PATH_TASK id=2253 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000
G1 X176.613 Y157.928 F24000
G1 F907
G1 X175.815 Y157.13 E.03698
;PATH_TASK id=2254 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000
G1 X176.069 Y156.417 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.168388
G1 F907
G2 X175.918 Y156.385 I-.119 J.189 E.00164
G1 X175.857 Y156.518 E.00152
;PATH_TASK id=2255 conformal=0 surface=-1 source_layer=26 shell_offset=-1.000000
G1 E-.71167 F2100
;WIPE_START
G1 F7200
G1 X175.918 Y156.385 E-.04258
G1 X175.999 Y156.388 E-.02383
G1 X176.069 Y156.417 E-.02191
;WIPE_END
G1 X184.143 Y157.826 F24000
G1 E.8 F1800
;WIDTH:0.111165
G1 F907
G3 X183.956 Y157.829 I-.095 J-.126 E.00113
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:5.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;5.6
G1 E-.74207 F2100
;WIPE_START
G1 F7200
G1 X184.026 Y157.858 E-.02197
G1 X184.066 Y157.858 E-.01157
G1 X184.143 Y157.826 E-.02439
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;5.6
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=2256 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
M486 S0
G1 X184.143 Y157.183 Z5.6 F24000
G1 X175.654 Y157.183
G1 X175.654 Y157.14
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F952
G1 X175.654 Y152.154 E.16879
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y157.14 E.16879
G1 X175.694 Y157.14 E.29289
;PATH_TASK id=2257 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
M204 T2500
G1 X175.694 Y157.183 F24000
G1 X175.611 Y157.183
G1 X175.611 Y157.183
G1 X175.225 Y157.569
M204 P2500
;TYPE:Outer wall
G1 F952
G1 X175.225 Y151.725 E.1978
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y157.569 E.1978
G1 X175.265 Y157.569 E.3219
;PATH_TASK id=2258 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X175.258 Y156.569 E-.16
;WIPE_END
G1 X175.611 Y156.569 F24000
G1 X177.366 Y153.866
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.61842
G1 F952
G1 X182.594 Y153.866 E.25017
;PATH_TASK id=2259 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
G1 X176.875 Y154.357 F24000
;WIDTH:0.449999
G1 F952
G1 X183.125 Y154.357 E.21157
G1 X183.125 Y153.375 E.03326
G1 X176.875 Y153.375 E.21157
G1 X176.875 Y154.317 E.03191
;PATH_TASK id=2260 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
G1 X176.468 Y154.764 F24000
G1 F952
G1 X183.532 Y154.764 E.23913
G1 X183.532 Y152.968 E.06082
G1 X176.468 Y152.968 E.23913
G1 X176.468 Y154.724 E.05946
;PATH_TASK id=2261 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
G1 X176.061 Y155.172 F24000
G1 F952
G1 X183.939 Y155.172 E.26669
G1 X183.939 Y152.561 E.08838
G1 X176.061 Y152.561 E.26669
G1 X176.061 Y155.132 E.08702
;PATH_TASK id=2262 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F11054.364
G1 X176.061 Y154.132 E-.16
;WIPE_END
G1 X183.387 Y156.979 F24000
G1 E.8 F1800
M204 P1500
;TYPE:Top surface
;WIDTH:0.43696
G1 F952
G1 X184.185 Y156.181 E.03699
;PATH_TASK id=2263 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
G1 X184.185 Y155.623 F24000
G1 F952
G1 X182.83 Y156.979 E.06281
;PATH_TASK id=2264 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
G1 X182.272 Y156.979 F24000
G1 F952
G1 X183.857 Y155.394 E.07344
;PATH_TASK id=2265 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
G1 X183.3 Y155.394 F24000
G1 F952
G1 X181.715 Y156.979 E.07344
;PATH_TASK id=2266 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
G1 X181.158 Y156.979 F24000
G1 F952
G1 X182.743 Y155.394 E.07344
;PATH_TASK id=2267 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
G1 X182.186 Y155.394 F24000
G1 F952
G1 X180.601 Y156.979 E.07344
;PATH_TASK id=2268 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
G1 X180.043 Y156.979 F24000
G1 F952
G1 X181.628 Y155.394 E.07344
;PATH_TASK id=2269 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
G1 X181.071 Y155.394 F24000
G1 F952
G1 X179.486 Y156.979 E.07344
;PATH_TASK id=2270 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
G1 X178.929 Y156.979 F24000
G1 F952
G1 X180.514 Y155.394 E.07344
;PATH_TASK id=2271 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
G1 X179.957 Y155.394 F24000
G1 F952
G1 X178.372 Y156.979 E.07344
;PATH_TASK id=2272 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
G1 X177.814 Y156.979 F24000
M73 P95 R2
G1 F952
G1 X179.399 Y155.394 E.07344
;PATH_TASK id=2273 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
G1 X178.842 Y155.394 F24000
G1 F952
G1 X177.257 Y156.979 E.07344
;PATH_TASK id=2274 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
G1 X176.7 Y156.979 F24000
G1 F952
G1 X178.285 Y155.394 E.07344
;PATH_TASK id=2275 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
G1 X177.727 Y155.394 F24000
G1 F952
G1 X176.143 Y156.979 E.07344
;PATH_TASK id=2276 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
G1 X175.815 Y156.749 F24000
G1 F952
G1 X177.17 Y155.394 E.0628
;PATH_TASK id=2277 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
G1 X176.613 Y155.394 F24000
G1 F952
G1 X175.815 Y156.192 E.03698
;PATH_TASK id=2278 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
G1 X176.043 Y156.88 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.108332
G1 F952
G3 X175.857 Y156.877 I-.091 J-.13 E.00108
;PATH_TASK id=2279 conformal=0 surface=-1 source_layer=27 shell_offset=-1.000000
G1 E-.74212 F2100
;WIPE_START
G1 F7200
G1 X175.934 Y156.908 E-.02437
G1 X175.974 Y156.908 E-.0116
G1 X176.043 Y156.88 E-.02191
;WIPE_END
G1 X184.143 Y155.568 F24000
G1 E.8 F1800
;WIDTH:0.162144
G1 F952
G1 X184.082 Y155.436 E.00145
G2 X183.931 Y155.468 I-.032 J.221 E.00156
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:5.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;5.8
G1 E-.71161 F2100
;WIPE_START
G1 F7200
G1 X184.001 Y155.439 E-.02197
G1 X184.082 Y155.436 E-.02383
G1 X184.143 Y155.568 E-.04259
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;5.8
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=2280 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000
M486 S0
G1 X175.654 Y156.191 Z5.8 F24000
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F900
G1 X175.654 Y152.154 E.13667
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y156.191 E.13667
M73 P95 R1
G1 X175.694 Y156.191 E.29289
;PATH_TASK id=2281 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000
M204 T2500
G1 X175.694 Y156.234 F24000
G1 X175.611 Y156.234
G1 X175.611 Y156.234
G1 X175.225 Y156.62
M204 P2500
;TYPE:Outer wall
G1 F900
G1 X175.225 Y151.725 E.16568
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y156.62 E.16568
G1 X175.265 Y156.62 E.3219
;PATH_TASK id=2282 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X175.257 Y155.62 E-.16
;WIPE_END
G1 X175.611 Y155.62 F24000
G1 X176.892 Y153.392
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.483512
G1 F900
G1 X183.068 Y153.392 E.22629
;PATH_TASK id=2283 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000
G1 X176.468 Y153.815 F24000
;WIDTH:0.449999
G1 F900
G1 X183.532 Y153.815 E.23913
G1 X183.532 Y152.968 E.02869
G1 X176.468 Y152.968 E.23913
G1 X176.468 Y153.775 E.02734
;PATH_TASK id=2284 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000
G1 X176.061 Y154.222 F24000
G1 F900
G1 X183.939 Y154.222 E.26669
G1 X183.939 Y152.561 E.05625
G1 X176.061 Y152.561 E.26669
G1 X176.061 Y154.182 E.0549
;PATH_TASK id=2285 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000
G1 X183.387 Y154.445 F24000
M204 P1500
;TYPE:Top surface
;WIDTH:0.43696
G1 F900
G1 X184.185 Y155.243 E.03699
;PATH_TASK id=2286 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000
G1 X184.185 Y155.8 F24000
G1 F900
G1 X182.83 Y154.445 E.06281
;PATH_TASK id=2287 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000
G1 X182.272 Y154.445 F24000
G1 F900
G1 X183.857 Y156.03 E.07344
;PATH_TASK id=2288 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000
G1 X183.3 Y156.03 F24000
G1 F900
G1 X181.715 Y154.445 E.07344
;PATH_TASK id=2289 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000
G1 X181.158 Y154.445 F24000
G1 F900
G1 X182.743 Y156.03 E.07344
;PATH_TASK id=2290 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000
G1 X182.186 Y156.03 F24000
G1 F900
G1 X180.601 Y154.445 E.07344
;PATH_TASK id=2291 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000
G1 X180.043 Y154.445 F24000
G1 F900
G1 X181.628 Y156.03 E.07344
;PATH_TASK id=2292 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000
G1 X181.071 Y156.03 F24000
G1 F900
G1 X179.486 Y154.445 E.07344
;PATH_TASK id=2293 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000
G1 X178.929 Y154.445 F24000
G1 F900
G1 X180.514 Y156.03 E.07344
;PATH_TASK id=2294 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000
G1 X179.957 Y156.03 F24000
G1 F900
G1 X178.372 Y154.445 E.07344
;PATH_TASK id=2295 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000
G1 X177.814 Y154.445 F24000
G1 F900
G1 X179.399 Y156.03 E.07344
;PATH_TASK id=2296 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000
G1 X178.842 Y156.03 F24000
G1 F900
G1 X177.257 Y154.445 E.07344
;PATH_TASK id=2297 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000
G1 X176.7 Y154.445 F24000
G1 F900
G1 X178.285 Y156.03 E.07344
;PATH_TASK id=2298 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000
G1 X177.727 Y156.03 F24000
G1 F900
G1 X176.143 Y154.445 E.07344
;PATH_TASK id=2299 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000
G1 X175.815 Y154.674 F24000
G1 F900
G1 X177.17 Y156.03 E.0628
;PATH_TASK id=2300 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000
G1 X176.613 Y156.03 F24000
G1 F900
G1 X175.815 Y155.232 E.03698
;PATH_TASK id=2301 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000
G1 X176.069 Y154.519 F24000
M204 P2500
;TYPE:Gap infill
;WIDTH:0.168388
G1 F900
G2 X175.918 Y154.487 I-.119 J.189 E.00164
G1 X175.857 Y154.619 E.00152
;PATH_TASK id=2302 conformal=0 surface=-1 source_layer=28 shell_offset=-1.000000
G1 E-.71168 F2100
;WIPE_START
G1 F7200
G1 X175.918 Y154.487 E-.04258
G1 X175.999 Y154.49 E-.02383
G1 X176.069 Y154.519 E-.02191
;WIPE_END
G1 X184.143 Y155.928 F24000
G1 E.8 F1800
;WIDTH:0.111165
G1 F900
G3 X183.956 Y155.931 I-.095 J-.126 E.00113
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;6
G1 E-.74207 F2100
;WIPE_START
G1 F7200
G1 X184.026 Y155.96 E-.02197
G1 X184.066 Y155.96 E-.01157
G1 X184.143 Y155.928 E-.02439
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;6
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=2303 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000
M486 S0
G1 X184.143 Y155.285 Z6 F24000
G1 X175.654 Y155.285
G1 X175.654 Y155.242
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F900
G1 X175.654 Y152.154 E.10454
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y155.242 E.10454
G1 X175.694 Y155.242 E.29289
;PATH_TASK id=2304 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000
M204 T2500
G1 X175.694 Y155.285 F24000
G1 X175.611 Y155.285
G1 X175.225 Y155.671
M204 P2500
;TYPE:Outer wall
G1 F900
G1 X175.225 Y151.725 E.13355
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y155.671 E.13355
G1 X175.265 Y155.671 E.3219
;PATH_TASK id=2305 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000
M204 T5000
G1 E-.64 F2100
;WIPE_START
G1 F10200
G1 X175.255 Y154.671 E-.16
;WIPE_END
G1 X176.04 Y154.671 F24000
G1 X176.04 Y154.309
G1 X176.061 Y154.309
G1 X176.061 Y153.861
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
G1 F900
G1 X183.939 Y153.861 E.26669
G1 X183.939 Y152.561 E.04403
G1 X176.061 Y152.561 E.26669
G1 X176.061 Y153.821 E.04268
;PATH_TASK id=2306 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000
G1 X176.488 Y153.434 F24000
;WIDTH:0.489807
G1 F900
G1 X183.512 Y153.434 E.26103
G1 X183.512 Y152.988 E.01661
G1 X176.488 Y152.988 E.26103
G1 X176.488 Y153.394 E.01512
;PATH_TASK id=2307 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000
G1 E-.64 F2100
;WIPE_START
G1 F10069.67
G1 X176.488 Y152.988 E-.0651
G1 X177.081 Y152.988 E-.0949
;WIPE_END
G1 X183.394 Y155.081 F24000
G1 E.8 F1800
M204 P1500
;TYPE:Top surface
;WIDTH:0.433765
G1 F900
G1 X184.185 Y154.289 E.03638
;PATH_TASK id=2308 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000
G1 X183.838 Y154.084 F24000
G1 F900
G1 X182.841 Y155.081 E.04582
;PATH_TASK id=2309 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000
G1 X182.288 Y155.081 F24000
G1 F900
G1 X183.285 Y154.084 E.04582
;PATH_TASK id=2310 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000
G1 X182.732 Y154.084 F24000
G1 F900
G1 X181.735 Y155.081 E.04582
;PATH_TASK id=2311 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000
G1 X181.183 Y155.081 F24000
G1 F900
G1 X182.18 Y154.084 E.04582
;PATH_TASK id=2312 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000
G1 X181.627 Y154.084 F24000
G1 F900
G1 X180.63 Y155.081 E.04582
;PATH_TASK id=2313 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000
G1 X180.077 Y155.081 F24000
G1 F900
G1 X181.074 Y154.084 E.04582
;PATH_TASK id=2314 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000
G1 X180.521 Y154.084 F24000
G1 F900
G1 X179.525 Y155.081 E.04582
;PATH_TASK id=2315 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000
G1 X178.972 Y155.081 F24000
G1 F900
G1 X179.969 Y154.084 E.04582
;PATH_TASK id=2316 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000
G1 X179.416 Y154.084 F24000
G1 F900
G1 X178.419 Y155.081 E.04582
;PATH_TASK id=2317 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000
G1 X177.866 Y155.081 F24000
G1 F900
G1 X178.863 Y154.084 E.04582
;PATH_TASK id=2318 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000
G1 X178.31 Y154.084 F24000
G1 F900
G1 X177.314 Y155.081 E.04582
;PATH_TASK id=2319 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000
G1 X176.761 Y155.081 F24000
G1 F900
G1 X177.758 Y154.084 E.04582
;PATH_TASK id=2320 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000
G1 X177.205 Y154.084 F24000
G1 F900
G1 X176.208 Y155.081 E.04582
;PATH_TASK id=2321 conformal=0 surface=-1 source_layer=29 shell_offset=-1.000000
G1 X175.815 Y154.921 F24000
G1 F900
G1 X176.652 Y154.084 E.03848
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:6.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;6.2
G1 E-.64 F2100
;WIPE_START
G1 F6000
G1 X175.945 Y154.791 E-.16
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;6.2
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=2322 conformal=0 surface=-1 source_layer=30 shell_offset=-1.000000
M486 S0
G1 X175.945 Y154.336 Z6.2 F24000
G1 X175.654 Y154.336
G1 X175.654 Y154.293
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F900
G1 X175.654 Y152.154 E.07242
G1 X184.346 Y152.154 E.29424
G1 X184.346 Y154.293 E.07242
G1 X175.694 Y154.293 E.29289
;PATH_TASK id=2323 conformal=0 surface=-1 source_layer=30 shell_offset=-1.000000
M204 T2500
G1 X175.694 Y154.336 F24000
G1 X175.611 Y154.336
G1 X175.225 Y154.722
M204 P2500
;TYPE:Outer wall
G1 F900
G1 X175.225 Y151.725 E.10143
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y154.722 E.10143
G1 X175.265 Y154.722 E.3219
;PATH_TASK id=2324 conformal=0 surface=-1 source_layer=30 shell_offset=-1.000000
M204 T5000
G1 X175.611 Y154.336 F24000
G1 X176.061 Y154.336
G1 X176.061 Y153.886
M204 P4000
;TYPE:Internal solid infill
G1 F900
G1 X183.939 Y153.886 E.26669
G1 X183.939 Y152.561 E.04486
G1 X176.061 Y152.561 E.26669
G1 X176.061 Y153.846 E.0435
;PATH_TASK id=2325 conformal=0 surface=-1 source_layer=30 shell_offset=-1.000000
G1 X176.494 Y153.453 F24000
;WIDTH:0.502014
G1 F900
G1 X183.506 Y153.453 E.2677
G1 X183.506 Y152.994 E.01753
G1 X176.494 Y152.994 E.2677
G1 X176.494 Y153.413 E.016
M73 P96 R1
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:6.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;6.4
G1 E-.64 F2100
;WIPE_START
G1 F9801.915
G1 X176.494 Y152.994 E-.06706
G1 X177.075 Y152.994 E-.09294
;WIPE_END
M486 S-1
;AFTER_LAYER_CHANGE
;6.4
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=2326 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
M486 S0
G1 Z6.8 F24000
G1 X175.654 Y152.154
G1 Z6.394
G1 E.8 F1800
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F8366
G1 X184.346 Y152.154 E.29421
G1 X184.346 Y154.5 E.07941
G1 X184.346 Y161 Z5.024 E.22485
G1 X184.346 Y164 E.10155
G1 X184.346 Y170.5 Z3.878 E.22341
G1 X184.346 Y173.5 E.10155
G1 X184.346 Y180 Z2.965 E.22218
G1 X184.346 Y183 E.10155
G1 X184.346 Y189.5 Z2.282 E.22123
G1 X184.346 Y192.5 E.10155
G1 X184.346 Y199 Z1.827 E.22056
G1 X184.346 Y202 E.10155
G1 X184.346 Y207.846 Z1.623 E.198
G1 X175.654 Y207.846 E.29421
G1 X175.654 Y202 Z1.827 E.198
G1 X175.654 Y199 E.10155
G1 X175.654 Y192.5 Z2.282 E.22056
G1 X175.654 Y189.5 E.10155
G1 X175.654 Y183 Z2.965 E.22123
G1 X175.654 Y180 E.10155
G1 X175.654 Y173.5 Z3.878 E.22218
G1 X175.654 Y170.5 E.10155
G1 X175.654 Y164 Z5.024 E.22341
G1 X175.654 Y161 E.10155
G1 X175.654 Y154.5 Z6.394 E.22485
G1 X175.654 Y152.194 E.07806
;PATH_TASK id=2327 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
M204 T2500
G1 Z6.794 F24000
G1 X175.611 Y152.194
G1 X175.611 Y152.111
G1 X175.225 Y151.725
G1 Z6.394
M204 P2500
;TYPE:Outer wall
G1 F8366
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y154.5 E.09393
G1 X184.775 Y161 Z5.024 E.22485
G1 X184.775 Y164 E.10155
G1 X184.775 Y170.5 Z3.878 E.22341
G1 X184.775 Y173.5 E.10155
G1 X184.775 Y180 Z2.965 E.22218
G1 X184.775 Y183 E.10155
G1 X184.775 Y189.5 Z2.282 E.22123
G1 X184.775 Y192.5 E.10155
G1 X184.775 Y199 Z1.827 E.22056
G1 X184.775 Y202 E.10155
G1 X184.775 Y208.275 Z1.608 E.21253
G1 X175.225 Y208.275 E.32326
G1 X175.225 Y202 Z1.827 E.21253
G1 X175.225 Y199 E.10155
G1 X175.225 Y192.5 Z2.282 E.22056
G1 X175.225 Y189.5 E.10155
G1 X175.225 Y183 Z2.965 E.22123
G1 X175.225 Y180 E.10155
G1 X175.225 Y173.5 Z3.878 E.22218
G1 X175.225 Y170.5 E.10155
G1 X175.225 Y164 Z5.024 E.22341
G1 X175.225 Y161 E.10155
G1 X175.225 Y154.5 Z6.394 E.22485
G1 X175.225 Y151.765 E.09258
;PATH_TASK id=2328 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
M204 T5000
G1 E-.8 F2100
G1 Z6.794 F24000
G1 X175.611 Y152.111
G1 X184.032 Y152.111
G1 X184.032 Y152.276
G1 Z6.394
G1 E.8 F1800
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.46739
G1 F8366
G1 X184.032 Y154.5 E.0785
G1 X184.032 Y161 Z5.024 E.23446
G1 X184.032 Y164 E.10588
G1 X184.032 Y170.5 Z3.878 E.23295
G1 X184.032 Y173.5 E.10588
G1 X184.032 Y180 Z2.965 E.23167
G1 X184.032 Y183 E.10588
G1 X184.032 Y189.5 Z2.282 E.23068
G1 X184.032 Y192.5 E.10588
G1 X184.032 Y199 Z1.827 E.22998
G1 X184.032 Y202 E.10588
G1 X184.032 Y207.541 Z1.633 E.19569
;PATH_TASK id=2328 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
G1 X184.032 Y207.541 F24000
G1 F8366
G1 X183.608 Y207.541 E.01497
G1 X183.608 Y202 Z1.827 E.19569
G1 X183.608 Y199 E.10588
G1 X183.608 Y192.5 Z2.282 E.22998
G1 X183.608 Y189.5 E.10588
G1 X183.608 Y183 Z2.965 E.23068
G1 X183.608 Y180 E.10588
G1 X183.608 Y173.5 Z3.878 E.23167
G1 X183.608 Y170.5 E.10588
G1 X183.608 Y164 Z5.024 E.23295
G1 X183.608 Y161 E.10588
G1 X183.608 Y154.5 Z6.394 E.23446
G1 X183.608 Y152.459 E.07204
;PATH_TASK id=2328 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
G1 X183.608 Y152.459 F24000
G1 F8366
G1 X183.183 Y152.459 E.015
G1 X183.183 Y154.5 E.07204
G1 X183.183 Y161 Z5.024 E.23446
G1 X183.183 Y164 E.10588
G1 X183.183 Y170.5 Z3.878 E.23295
G1 X183.183 Y173.5 E.10588
G1 X183.183 Y180 Z2.965 E.23167
G1 X183.183 Y183 E.10588
G1 X183.183 Y189.5 Z2.282 E.23068
G1 X183.183 Y192.5 E.10588
G1 X183.183 Y199 Z1.827 E.22998
G1 X183.183 Y202 E.10588
G1 X183.183 Y207.541 Z1.633 E.19569
;PATH_TASK id=2328 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
G1 X183.183 Y207.541 F24000
G1 F8366
G1 X182.759 Y207.541 E.01497
G1 X182.759 Y202 Z1.827 E.19569
G1 X182.759 Y199 E.10588
G1 X182.759 Y192.5 Z2.282 E.22998
G1 X182.759 Y189.5 E.10588
G1 X182.759 Y183 Z2.965 E.23068
G1 X182.759 Y180 E.10588
G1 X182.759 Y173.5 Z3.878 E.23167
G1 X182.759 Y170.5 E.10588
G1 X182.759 Y164 Z5.024 E.23295
G1 X182.759 Y161 E.10588
G1 X182.759 Y154.5 Z6.394 E.23446
G1 X182.759 Y152.459 E.07204
;PATH_TASK id=2328 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
G1 X182.759 Y152.459 F24000
G1 F8366
G1 X182.335 Y152.459 E.01497
G1 X182.335 Y154.5 E.07204
G1 X182.335 Y161 Z5.024 E.23446
G1 X182.335 Y164 E.10588
G1 X182.335 Y170.5 Z3.878 E.23295
G1 X182.335 Y173.5 E.10588
G1 X182.335 Y180 Z2.965 E.23167
G1 X182.335 Y183 E.10588
G1 X182.335 Y189.5 Z2.282 E.23068
G1 X182.335 Y192.5 E.10588
G1 X182.335 Y199 Z1.827 E.22998
G1 X182.335 Y202 E.10588
G1 X182.335 Y207.541 Z1.633 E.19569
;PATH_TASK id=2328 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
G1 X182.335 Y207.541 F24000
G1 F8366
G1 X181.91 Y207.541 E.015
G1 X181.91 Y202 Z1.827 E.19569
G1 X181.91 Y199 E.10588
G1 X181.91 Y192.5 Z2.282 E.22998
G1 X181.91 Y189.5 E.10588
G1 X181.91 Y183 Z2.965 E.23068
G1 X181.91 Y180 E.10588
G1 X181.91 Y173.5 Z3.878 E.23167
G1 X181.91 Y170.5 E.10588
G1 X181.91 Y164 Z5.024 E.23295
G1 X181.91 Y161 E.10588
G1 X181.91 Y154.5 Z6.394 E.23446
G1 X181.91 Y152.459 E.07204
;PATH_TASK id=2328 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
G1 X181.91 Y152.459 F24000
G1 F8366
G1 X181.486 Y152.459 E.01497
G1 X181.486 Y154.5 E.07204
G1 X181.486 Y161 Z5.024 E.23446
G1 X181.486 Y164 E.10588
G1 X181.486 Y170.5 Z3.878 E.23295
G1 X181.486 Y173.5 E.10588
G1 X181.486 Y180 Z2.965 E.23167
G1 X181.486 Y183 E.10588
G1 X181.486 Y189.5 Z2.282 E.23068
G1 X181.486 Y192.5 E.10588
G1 X181.486 Y199 Z1.827 E.22998
G1 X181.486 Y202 E.10588
G1 X181.486 Y207.541 Z1.633 E.19569
;PATH_TASK id=2328 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
G1 X181.486 Y207.541 F24000
G1 F8366
G1 X181.061 Y207.541 E.015
G1 X181.061 Y202 Z1.827 E.19569
G1 X181.061 Y199 E.10588
G1 X181.061 Y192.5 Z2.282 E.22998
G1 X181.061 Y189.5 E.10588
G1 X181.061 Y183 Z2.965 E.23068
G1 X181.061 Y180 E.10588
G1 X181.061 Y173.5 Z3.878 E.23167
G1 X181.061 Y170.5 E.10588
G1 X181.061 Y164 Z5.024 E.23295
G1 X181.061 Y161 E.10588
G1 X181.061 Y154.5 Z6.394 E.23446
G1 X181.061 Y152.459 E.07204
;PATH_TASK id=2328 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
G1 X181.061 Y152.459 F24000
G1 F8366
G1 X180.637 Y152.459 E.01497
G1 X180.637 Y154.5 E.07204
G1 X180.637 Y161 Z5.024 E.23446
G1 X180.637 Y164 E.10588
G1 X180.637 Y170.5 Z3.878 E.23295
G1 X180.637 Y173.5 E.10588
G1 X180.637 Y180 Z2.965 E.23167
G1 X180.637 Y183 E.10588
G1 X180.637 Y189.5 Z2.282 E.23068
G1 X180.637 Y192.5 E.10588
G1 X180.637 Y199 Z1.827 E.22998
G1 X180.637 Y202 E.10588
G1 X180.637 Y207.541 Z1.633 E.19569
;PATH_TASK id=2328 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
G1 X180.637 Y207.541 F24000
G1 F8366
G1 X180.212 Y207.541 E.015
G1 X180.212 Y202 Z1.827 E.19569
G1 X180.212 Y199 E.10588
G1 X180.212 Y192.5 Z2.282 E.22998
G1 X180.212 Y189.5 E.10588
G1 X180.212 Y183 Z2.965 E.23068
G1 X180.212 Y180 E.10588
G1 X180.212 Y173.5 Z3.878 E.23167
G1 X180.212 Y170.5 E.10588
G1 X180.212 Y164 Z5.024 E.23295
G1 X180.212 Y161 E.10588
G1 X180.212 Y154.5 Z6.394 E.23446
G1 X180.212 Y152.459 E.07204
;PATH_TASK id=2328 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
G1 X180.212 Y152.459 F24000
G1 F8366
G1 X179.788 Y152.459 E.01497
;PATH_TASK id=2328 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
G1 X179.788 Y152.459 F24000
G1 F8366
G1 X179.788 Y154.5 E.07204
G1 X179.788 Y161 Z5.024 E.23446
G1 X179.788 Y164 E.10588
G1 X179.788 Y170.5 Z3.878 E.23295
G1 X179.788 Y173.5 E.10588
G1 X179.788 Y180 Z2.965 E.23167
G1 X179.788 Y183 E.10588
G1 X179.788 Y189.5 Z2.282 E.23068
G1 X179.788 Y192.5 E.10588
G1 X179.788 Y199 Z1.827 E.22998
G1 X179.788 Y202 E.10588
G1 X179.788 Y207.541 Z1.633 E.19569
;PATH_TASK id=2328 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
G1 X179.788 Y207.541 F24000
G1 F8366
G1 X179.363 Y207.541 E.015
G1 X179.363 Y202 Z1.827 E.19569
G1 X179.363 Y199 E.10588
G1 X179.363 Y192.5 Z2.282 E.22998
G1 X179.363 Y189.5 E.10588
G1 X179.363 Y183 Z2.965 E.23068
G1 X179.363 Y180 E.10588
G1 X179.363 Y173.5 Z3.878 E.23167
G1 X179.363 Y170.5 E.10588
G1 X179.363 Y164 Z5.024 E.23295
G1 X179.363 Y161 E.10588
G1 X179.363 Y154.5 Z6.394 E.23446
G1 X179.363 Y152.459 E.07204
;PATH_TASK id=2328 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
G1 X179.363 Y152.459 F24000
G1 F8366
G1 X178.939 Y152.459 E.01497
G1 X178.939 Y154.5 E.07204
G1 X178.939 Y161 Z5.024 E.23446
G1 X178.939 Y164 E.10588
G1 X178.939 Y170.5 Z3.878 E.23295
G1 X178.939 Y173.5 E.10588
G1 X178.939 Y180 Z2.965 E.23167
G1 X178.939 Y183 E.10588
G1 X178.939 Y189.5 Z2.282 E.23068
G1 X178.939 Y192.5 E.10588
G1 X178.939 Y199 Z1.827 E.22998
G1 X178.939 Y202 E.10588
G1 X178.939 Y207.541 Z1.633 E.19569
;PATH_TASK id=2328 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
G1 X178.939 Y207.541 F24000
G1 F8366
G1 X178.514 Y207.541 E.015
;PATH_TASK id=2328 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
G1 X178.514 Y207.541 F24000
G1 F8366
G1 X178.514 Y202 Z1.827 E.19569
G1 X178.514 Y199 E.10588
G1 X178.514 Y192.5 Z2.282 E.22998
G1 X178.514 Y189.5 E.10588
G1 X178.514 Y183 Z2.965 E.23068
G1 X178.514 Y180 E.10588
G1 X178.514 Y173.5 Z3.878 E.23167
G1 X178.514 Y170.5 E.10588
G1 X178.514 Y164 Z5.024 E.23295
G1 X178.514 Y161 E.10588
G1 X178.514 Y154.5 Z6.394 E.23446
G1 X178.514 Y152.459 E.07204
;PATH_TASK id=2328 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
G1 X178.514 Y152.459 F24000
G1 F8366
G1 X178.09 Y152.459 E.01497
G1 X178.09 Y154.5 E.07204
G1 X178.09 Y161 Z5.024 E.23446
G1 X178.09 Y164 E.10588
G1 X178.09 Y170.5 Z3.878 E.23295
G1 X178.09 Y173.5 E.10588
G1 X178.09 Y180 Z2.965 E.23167
G1 X178.09 Y183 E.10588
G1 X178.09 Y189.5 Z2.282 E.23068
G1 X178.09 Y192.5 E.10588
G1 X178.09 Y199 Z1.827 E.22998
G1 X178.09 Y202 E.10588
G1 X178.09 Y207.541 Z1.633 E.19569
;PATH_TASK id=2328 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
G1 X178.09 Y207.541 F24000
G1 F8366
G1 X177.665 Y207.541 E.015
G1 X177.665 Y202 Z1.827 E.19569
G1 X177.665 Y199 E.10588
G1 X177.665 Y192.5 Z2.282 E.22998
G1 X177.665 Y189.5 E.10588
G1 X177.665 Y183 Z2.965 E.23068
G1 X177.665 Y180 E.10588
G1 X177.665 Y173.5 Z3.878 E.23167
G1 X177.665 Y170.5 E.10588
G1 X177.665 Y164 Z5.024 E.23295
G1 X177.665 Y161 E.10588
G1 X177.665 Y154.5 Z6.394 E.23446
G1 X177.665 Y152.459 E.07204
;PATH_TASK id=2328 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
G1 X177.665 Y152.459 F24000
G1 F8366
G1 X177.241 Y152.459 E.01497
G1 X177.241 Y154.5 E.07204
G1 X177.241 Y161 Z5.024 E.23446
G1 X177.241 Y164 E.10588
G1 X177.241 Y170.5 Z3.878 E.23295
G1 X177.241 Y173.5 E.10588
G1 X177.241 Y180 Z2.965 E.23167
G1 X177.241 Y183 E.10588
G1 X177.241 Y189.5 Z2.282 E.23068
G1 X177.241 Y192.5 E.10588
G1 X177.241 Y199 Z1.827 E.22998
G1 X177.241 Y202 E.10588
G1 X177.241 Y207.541 Z1.633 E.19569
;PATH_TASK id=2328 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
G1 X177.241 Y207.541 F24000
G1 F8366
G1 X176.816 Y207.541 E.015
G1 X176.816 Y202 Z1.827 E.19569
G1 X176.816 Y199 E.10588
G1 X176.816 Y192.5 Z2.282 E.22998
G1 X176.816 Y189.5 E.10588
G1 X176.816 Y183 Z2.965 E.23068
G1 X176.816 Y180 E.10588
G1 X176.816 Y173.5 Z3.878 E.23167
G1 X176.816 Y170.5 E.10588
G1 X176.816 Y164 Z5.024 E.23295
G1 X176.816 Y161 E.10588
G1 X176.816 Y154.5 Z6.394 E.23446
G1 X176.816 Y152.459 E.07204
;PATH_TASK id=2328 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
G1 X176.816 Y152.459 F24000
G1 F8366
G1 X176.392 Y152.459 E.01497
G1 X176.392 Y154.5 E.07204
G1 X176.392 Y161 Z5.024 E.23446
G1 X176.392 Y164 E.10588
G1 X176.392 Y170.5 Z3.878 E.23295
G1 X176.392 Y173.5 E.10588
G1 X176.392 Y180 Z2.965 E.23167
G1 X176.392 Y183 E.10588
G1 X176.392 Y189.5 Z2.282 E.23068
G1 X176.392 Y192.5 E.10588
G1 X176.392 Y199 Z1.827 E.22998
G1 X176.392 Y202 E.10588
G1 X176.392 Y207.541 Z1.633 E.19569
;PATH_TASK id=2328 conformal=1 surface=0 source_layer=7 shell_offset=0.400000
G1 X176.392 Y207.541 F24000
G1 F8366
G1 X175.967 Y207.541 E.015
G1 X175.967 Y202 Z1.827 E.19569
G1 X175.967 Y199 E.10588
G1 X175.967 Y192.5 Z2.282 E.22998
G1 X175.967 Y189.5 E.10588
G1 X175.967 Y183 Z2.965 E.23068
G1 X175.967 Y180 E.10588
G1 X175.967 Y173.5 Z3.878 E.23167
G1 X175.967 Y170.5 E.10588
G1 X175.967 Y164 Z5.024 E.23295
G1 X175.967 Y161 E.10588
G1 X175.967 Y154.5 Z6.394 E.23446
G1 X175.967 Y152.276 E.0785
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:6.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;6.6
G1 E-.8 F2100
M486 S-1
;AFTER_LAYER_CHANGE
;6.6
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=2329 conformal=1 surface=0 source_layer=8 shell_offset=0.200000
M486 S0
G1 Z7 F24000
G1 X184.346 Y207.846
G1 Z1.823
G1 E.8 F1800
M73 P97 R1
M204 P3000
;TYPE:Inner wall
;WIDTH:0.449999
G1 F8512
G1 X175.654 Y207.846 E.29421
G1 X175.654 Y202 Z2.027 E.198
G1 X175.654 Y199 E.10155
G1 X175.654 Y192.5 Z2.482 E.22056
G1 X175.654 Y189.5 E.10155
G1 X175.654 Y183 Z3.165 E.22123
G1 X175.654 Y180 E.10155
G1 X175.654 Y173.5 Z4.078 E.22218
G1 X175.654 Y170.5 E.10155
G1 X175.654 Y164 Z5.224 E.22341
G1 X175.654 Y161 E.10155
G1 X175.654 Y154.5 Z6.594 E.22485
G1 X175.654 Y152.154 E.07941
G1 X184.346 Y152.154 E.29421
G1 X184.346 Y154.5 E.07941
G1 X184.346 Y161 Z5.224 E.22485
G1 X184.346 Y164 E.10155
G1 X184.346 Y170.5 Z4.078 E.22341
G1 X184.346 Y173.5 E.10155
G1 X184.346 Y180 Z3.165 E.22218
G1 X184.346 Y183 E.10155
G1 X184.346 Y189.5 Z2.482 E.22123
G1 X184.346 Y192.5 E.10155
G1 X184.346 Y199 Z2.027 E.22056
G1 X184.346 Y202 E.10155
G1 X184.346 Y207.806 Z1.824 E.19665
;PATH_TASK id=2330 conformal=1 surface=0 source_layer=8 shell_offset=0.200000
M204 T2500
G1 Z2.224 F24000
G1 X184.389 Y207.806
G1 X184.389 Y207.889
G1 X184.775 Y208.275
G1 Z1.808
M204 P2500
;TYPE:Outer wall
G1 F8512
G1 X175.225 Y208.275 E.32326
G1 X175.225 Y202 Z2.027 E.21253
G1 X175.225 Y199 E.10155
G1 X175.225 Y192.5 Z2.482 E.22056
G1 X175.225 Y189.5 E.10155
G1 X175.225 Y183 Z3.165 E.22123
G1 X175.225 Y180 E.10155
G1 X175.225 Y173.5 Z4.078 E.22218
G1 X175.225 Y170.5 E.10155
G1 X175.225 Y164 Z5.224 E.22341
G1 X175.225 Y161 E.10155
G1 X175.225 Y154.5 Z6.594 E.22485
G1 X175.225 Y151.725 E.09393
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y154.5 E.09393
G1 X184.775 Y161 Z5.224 E.22485
G1 X184.775 Y164 E.10155
G1 X184.775 Y170.5 Z4.078 E.22341
G1 X184.775 Y173.5 E.10155
G1 X184.775 Y180 Z3.165 E.22218
G1 X184.775 Y183 E.10155
G1 X184.775 Y189.5 Z2.482 E.22123
G1 X184.775 Y192.5 E.10155
G1 X184.775 Y199 Z2.027 E.22056
G1 X184.775 Y202 E.10155
G1 X184.775 Y208.235 Z1.809 E.21118
;PATH_TASK id=2331 conformal=1 surface=0 source_layer=8 shell_offset=0.200000
M204 T5000
G1 Z2.234 F24000
G1 X184.389 Y207.889
G1 X184.389 Y207.541
G1 X184.224 Y207.541
G1 Z1.834
M204 P4000
;TYPE:Internal solid infill
;WIDTH:0.45093
G1 F8512
G1 X175.959 Y207.541 E.2804
G1 X175.959 Y207.133 Z1.848 E.01385
;PATH_TASK id=2331 conformal=1 surface=0 source_layer=8 shell_offset=0.200000
G1 X175.959 Y207.133 F24000
G1 F8512
G1 X184.041 Y207.133 E.27419
G1 X184.041 Y206.725 Z1.862 E.01385
G1 X175.959 Y206.725 E.27419
G1 X175.959 Y206.317 Z1.876 E.01385
G1 X184.041 Y206.317 E.27419
G1 X184.041 Y205.909 Z1.89 E.01385
G1 X175.959 Y205.909 E.27419
G1 X175.959 Y205.501 Z1.905 E.01385
;PATH_TASK id=2331 conformal=1 surface=0 source_layer=8 shell_offset=0.200000
G1 X175.959 Y205.501 F24000
G1 F8512
G1 X184.041 Y205.501 E.27419
G1 X184.041 Y205.093 Z1.919 E.01385
G1 X175.959 Y205.093 E.27419
G1 X175.959 Y204.685 Z1.933 E.01385
G1 X184.041 Y204.685 E.27419
G1 X184.041 Y204.277 Z1.947 E.01385
G1 X175.959 Y204.277 E.27419
G1 X175.959 Y203.869 Z1.962 E.01385
;PATH_TASK id=2331 conformal=1 surface=0 source_layer=8 shell_offset=0.200000
G1 X175.959 Y203.869 F24000
G1 F8512
G1 X184.041 Y203.869 E.27419
G1 X184.041 Y203.461 Z1.976 E.01385
G1 X175.959 Y203.461 E.27419
G1 X175.959 Y203.053 Z1.99 E.01385
G1 X184.041 Y203.053 E.27419
G1 X184.041 Y202.645 Z2.004 E.01385
G1 X175.959 Y202.645 E.27419
G1 X175.959 Y202.237 Z2.019 E.01385
;PATH_TASK id=2331 conformal=1 surface=0 source_layer=8 shell_offset=0.200000
G1 X175.959 Y202.237 F24000
G1 F8512
G1 X184.041 Y202.237 E.27419
G1 X184.041 Y202 Z2.027 E.00805
G1 X184.041 Y201.829 E.0058
G1 X175.959 Y201.829 E.27419
G1 X175.959 Y201.42 E.01388
G1 X184.041 Y201.42 E.27419
G1 X184.041 Y201.012 E.01384
G1 X175.959 Y201.012 E.27419
G1 X175.959 Y200.604 E.01384
;PATH_TASK id=2331 conformal=1 surface=0 source_layer=8 shell_offset=0.200000
G1 X175.959 Y200.604 F24000
G1 F8512
G1 X184.041 Y200.604 E.27419
G1 X184.041 Y200.196 E.01384
G1 X175.959 Y200.196 E.27419
G1 X175.959 Y199.788 E.01384
G1 X184.041 Y199.788 E.27419
G1 X184.041 Y199.38 E.01384
G1 X175.959 Y199.38 E.27419
G1 X175.959 Y198.972 Z2.029 E.01384
;PATH_TASK id=2331 conformal=1 surface=0 source_layer=8 shell_offset=0.200000
G1 X175.959 Y198.972 F24000
G1 F8512
G1 X184.041 Y198.972 E.27419
G1 X184.041 Y198.564 Z2.057 E.01387
G1 X175.959 Y198.564 E.27419
G1 X175.959 Y198.156 Z2.086 E.01388
G1 X184.041 Y198.156 E.27419
G1 X184.041 Y197.748 Z2.115 E.01388
G1 X175.959 Y197.748 E.27419
G1 X175.959 Y197.34 Z2.143 E.01387
;PATH_TASK id=2331 conformal=1 surface=0 source_layer=8 shell_offset=0.200000
G1 X175.959 Y197.34 F24000
G1 F8512
G1 X184.041 Y197.34 E.27419
G1 X184.041 Y196.932 Z2.172 E.01388
G1 X175.959 Y196.932 E.27419
G1 X175.959 Y196.524 Z2.2 E.01387
G1 X184.041 Y196.524 E.27419
G1 X184.041 Y196.116 Z2.229 E.01388
G1 X175.959 Y196.116 E.27419
G1 X175.959 Y195.708 Z2.257 E.01387
;PATH_TASK id=2331 conformal=1 surface=0 source_layer=8 shell_offset=0.200000
G1 X175.959 Y195.708 F24000
G1 F8512
G1 X184.041 Y195.708 E.27419
G1 X184.041 Y195.3 Z2.286 E.01388
G1 X175.959 Y195.3 E.27419
G1 X175.959 Y194.892 Z2.314 E.01387
G1 X184.041 Y194.892 E.27419
G1 X184.041 Y194.484 Z2.343 E.01388
;PATH_TASK id=2331 conformal=1 surface=0 source_layer=8 shell_offset=0.200000
G1 X184.041 Y194.484 F24000
G1 F8512
G1 X175.959 Y194.484 E.27419
G1 X175.959 Y194.076 Z2.371 E.01387
G1 X184.041 Y194.076 E.27419
G1 X184.041 Y193.668 Z2.4 E.01388
G1 X175.959 Y193.668 E.27419
G1 X175.959 Y193.26 Z2.428 E.01387
G1 X184.041 Y193.26 E.27419
G1 X184.041 Y192.852 Z2.457 E.01388
;PATH_TASK id=2331 conformal=1 surface=0 source_layer=8 shell_offset=0.200000
G1 X184.041 Y192.852 F24000
G1 F8512
G1 X175.959 Y192.852 E.27419
G1 X175.959 Y192.5 Z2.482 E.01197
G1 X175.959 Y192.444 E.0019
G1 X184.041 Y192.444 E.27419
G1 X184.041 Y192.036 E.01384
G1 X175.959 Y192.036 E.27419
G1 X175.959 Y191.628 E.01384
G1 X184.041 Y191.628 E.27419
G1 X184.041 Y191.22 E.01384
;PATH_TASK id=2331 conformal=1 surface=0 source_layer=8 shell_offset=0.200000
G1 X184.041 Y191.22 F24000
G1 F8512
G1 X175.959 Y191.22 E.27419
G1 X175.959 Y190.812 E.01384
G1 X184.041 Y190.812 E.27419
G1 X184.041 Y190.404 E.01384
G1 X175.959 Y190.404 E.27419
G1 X175.959 Y189.996 E.01384
G1 X184.041 Y189.996 E.27419
G1 X184.041 Y189.588 E.01384
;PATH_TASK id=2331 conformal=1 surface=0 source_layer=8 shell_offset=0.200000
G1 X184.041 Y189.588 F24000
G1 F8512
G1 X175.959 Y189.588 E.27419
G1 X175.959 Y189.5 E.00299
G1 X175.959 Y189.18 Z2.515 E.01091
G1 X184.041 Y189.18 E.27419
G1 X184.041 Y188.772 Z2.558 E.01392
G1 X175.959 Y188.772 E.27419
G1 X175.959 Y188.364 Z2.601 E.01392
G1 X184.041 Y188.364 E.27419
G1 X184.041 Y187.956 Z2.644 E.01392
;PATH_TASK id=2331 conformal=1 surface=0 source_layer=8 shell_offset=0.200000
G1 X184.041 Y187.956 F24000
G1 F8512
G1 X175.959 Y187.956 E.27419
G1 X175.959 Y187.548 Z2.687 E.01392
G1 X184.041 Y187.548 E.27419
G1 X184.041 Y187.14 Z2.73 E.01392
G1 X175.959 Y187.14 E.27419
G1 X175.959 Y186.732 Z2.772 E.01392
G1 X184.041 Y186.732 E.27419
G1 X184.041 Y186.324 Z2.815 E.01392
G1 X175.959 Y186.324 E.27419
G1 X175.959 Y185.916 Z2.858 E.01392
G1 X184.041 Y185.916 E.27419
G1 X184.041 Y185.508 Z2.901 E.01392
G1 X175.959 Y185.508 E.27419
G1 X175.959 Y185.1 Z2.944 E.01392
G1 X184.041 Y185.1 E.27419
G1 X184.041 Y184.692 Z2.987 E.01392
G1 X175.959 Y184.692 E.27419
G1 X175.959 Y184.284 Z3.03 E.01392
G1 X184.041 Y184.284 E.27419
G1 X184.041 Y183.876 Z3.073 E.01392
G1 X175.959 Y183.876 E.27419
G1 X175.959 Y183.468 Z3.115 E.01392
G1 X184.041 Y183.468 E.27419
G1 X184.041 Y183.06 Z3.158 E.01392
G1 X175.959 Y183.06 E.27419
G1 X175.959 Y182.652 Z3.165 E.01384
G1 X184.041 Y182.652 E.27419
G1 X184.041 Y182.244 E.01384
G1 X175.959 Y182.244 E.27419
G1 X175.959 Y181.836 E.01384
;PATH_TASK id=2331 conformal=1 surface=0 source_layer=8 shell_offset=0.200000
G1 X175.959 Y181.836 F24000
G1 F8512
G1 X184.041 Y181.836 E.27419
G1 X184.041 Y181.428 E.01384
G1 X175.959 Y181.428 E.27419
G1 X175.959 Y181.02 E.01384
G1 X184.041 Y181.02 E.27419
G1 X184.041 Y180.612 E.01384
G1 X175.959 Y180.612 E.27419
G1 X175.959 Y180.204 E.01384
G1 X184.041 Y180.204 E.27419
G1 X184.041 Y180 E.00692
G1 X184.041 Y179.796 Z3.193 E.00699
G1 X175.959 Y179.796 E.27419
G1 X175.959 Y179.388 Z3.251 E.01398
G1 X184.041 Y179.388 E.27419
G1 X184.041 Y178.98 Z3.308 E.01398
G1 X175.959 Y178.98 E.27419
G1 X175.959 Y178.572 Z3.365 E.01398
G1 X184.041 Y178.572 E.27419
G1 X184.041 Y178.164 Z3.423 E.01398
G1 X175.959 Y178.164 E.27419
G1 X175.959 Y177.756 Z3.48 E.01398
G1 X184.041 Y177.756 E.27419
G1 X184.041 Y177.348 Z3.537 E.01398
G1 X175.959 Y177.348 E.27419
G1 X175.959 Y176.94 Z3.595 E.01398
G1 X184.041 Y176.94 E.27419
G1 X184.041 Y176.532 Z3.652 E.01398
G1 X175.959 Y176.532 E.27419
G1 X175.959 Y176.124 Z3.709 E.01398
G1 X184.041 Y176.124 E.27419
G1 X184.041 Y175.716 Z3.767 E.01398
G1 X175.959 Y175.716 E.27419
G1 X175.959 Y175.308 Z3.824 E.01398
G1 X184.041 Y175.308 E.27419
G1 X184.041 Y174.9 Z3.881 E.01398
G1 X175.959 Y174.9 E.27419
G1 X175.959 Y174.492 Z3.939 E.01398
G1 X184.041 Y174.492 E.27419
G1 X184.041 Y174.123 Z3.991 E.01264
M73 P97 R0
G1 X184.041 Y174.084 Z3.996 E.00133
G1 X175.959 Y174.084 E.27419
G1 X175.959 Y173.676 Z4.053 E.01398
G1 X184.041 Y173.676 E.27419
G1 X184.041 Y173.5 Z4.078 E.00603
G1 X184.041 Y173.268 E.00787
G1 X175.959 Y173.268 E.27419
G1 X175.959 Y172.86 E.01384
G1 X184.041 Y172.86 E.27419
G1 X184.041 Y172.452 E.01384
G1 X175.959 Y172.452 E.27419
G1 X175.959 Y172.044 E.01384
G1 X184.041 Y172.044 E.27419
G1 X184.041 Y171.636 E.01384
G1 X175.959 Y171.636 E.27419
G1 X175.959 Y171.228 E.01384
;PATH_TASK id=2331 conformal=1 surface=0 source_layer=8 shell_offset=0.200000
G1 X175.959 Y171.228 F24000
G1 F8512
G1 X184.041 Y171.228 E.27419
G1 X184.041 Y170.82 E.01384
G1 X175.959 Y170.82 E.27419
G1 X175.959 Y170.5 E.01086
G1 X175.959 Y170.412 Z4.094 E.00303
G1 X184.041 Y170.412 E.27419
G1 X184.041 Y170.004 Z4.166 E.01406
G1 X175.959 Y170.004 E.27419
G1 X175.959 Y169.596 Z4.238 E.01406
;PATH_TASK id=2331 conformal=1 surface=0 source_layer=8 shell_offset=0.200000
G1 X175.959 Y169.596 F24000
G1 F8512
G1 X184.041 Y169.596 E.27419
G1 X184.041 Y169.188 Z4.31 E.01406
G1 X175.959 Y169.188 E.27419
G1 X175.959 Y168.78 Z4.382 E.01406
G1 X184.041 Y168.78 E.27419
G1 X184.041 Y168.372 Z4.453 E.01405
G1 X175.959 Y168.372 E.27419
G1 X175.959 Y167.964 Z4.525 E.01406
;PATH_TASK id=2331 conformal=1 surface=0 source_layer=8 shell_offset=0.200000
G1 X175.959 Y167.964 F24000
G1 F8512
G1 X184.041 Y167.964 E.27419
G1 X184.041 Y167.556 Z4.597 E.01406
G1 X175.959 Y167.556 E.27419
G1 X175.959 Y167.148 Z4.669 E.01406
G1 X184.041 Y167.148 E.27419
G1 X184.041 Y166.74 Z4.741 E.01406
G1 X175.959 Y166.74 E.27419
G1 X175.959 Y166.332 Z4.813 E.01406
;PATH_TASK id=2331 conformal=1 surface=0 source_layer=8 shell_offset=0.200000
G1 X175.959 Y166.332 F24000
G1 F8512
G1 X184.041 Y166.332 E.27419
G1 X184.041 Y165.924 Z4.885 E.01406
G1 X175.959 Y165.924 E.27419
G1 X175.959 Y165.516 Z4.957 E.01406
G1 X184.041 Y165.516 E.27419
G1 X184.041 Y165.108 Z5.029 E.01406
G1 X175.959 Y165.108 E.27419
G1 X175.959 Y164.7 Z5.101 E.01406
;PATH_TASK id=2331 conformal=1 surface=0 source_layer=8 shell_offset=0.200000
G1 X175.959 Y164.7 F24000
G1 F8512
G1 X184.041 Y164.7 E.27419
G1 X184.041 Y164.292 Z5.173 E.01406
G1 X175.959 Y164.292 E.27419
G1 X175.959 Y164 Z5.224 E.01006
G1 X175.959 Y163.884 E.00394
G1 X184.041 Y163.884 E.27419
G1 X184.041 Y163.476 E.01384
G1 X175.959 Y163.476 E.27419
G1 X175.959 Y163.068 E.01384
G1 X184.041 Y163.068 E.27419
G1 X184.041 Y162.66 E.01384
G1 X175.959 Y162.66 E.27419
G1 X175.959 Y162.252 E.01384
G1 X184.041 Y162.252 E.27419
G1 X184.041 Y161.844 E.01384
G1 X175.959 Y161.844 E.27419
G1 X175.959 Y161.436 E.01384
G1 X184.041 Y161.436 E.27419
G1 X184.041 Y161.028 E.01384
G1 X175.959 Y161.028 E.27419
G1 X175.959 Y160.619 Z5.305 E.01415
G1 X184.041 Y160.619 E.27419
G1 X184.041 Y160.211 Z5.39 E.01414
G1 X175.959 Y160.211 E.27419
G1 X175.959 Y159.803 Z5.476 E.01415
G1 X184.041 Y159.803 E.27419
G1 X184.041 Y159.395 Z5.562 E.01415
G1 X175.959 Y159.395 E.27419
G1 X175.959 Y158.987 Z5.648 E.01415
G1 X184.041 Y158.987 E.27419
G1 X184.041 Y158.579 Z5.734 E.01415
G1 X175.959 Y158.579 E.27419
G1 X175.959 Y158.171 Z5.82 E.01415
G1 X184.041 Y158.171 E.27419
G1 X184.041 Y157.763 Z5.906 E.01415
G1 X175.959 Y157.763 E.27419
G1 X175.959 Y157.355 Z5.992 E.01415
G1 X184.041 Y157.355 E.27419
G1 X184.041 Y156.947 Z6.078 E.01415
G1 X175.959 Y156.947 E.27419
G1 X175.959 Y156.539 Z6.164 E.01415
G1 X184.041 Y156.539 E.27419
G1 X184.041 Y156.131 Z6.25 E.01415
G1 X175.959 Y156.131 E.27419
G1 X175.959 Y155.723 Z6.336 E.01415
G1 X184.041 Y155.723 E.27419
G1 X184.041 Y155.315 Z6.422 E.01415
G1 X175.959 Y155.315 E.27419
G1 X175.959 Y154.907 Z6.508 E.01415
G1 X184.041 Y154.907 E.27419
G1 X184.041 Y154.5 Z6.594 E.01411
G1 X175.959 Y154.499 E.27419
G1 X175.959 Y154.091 E.01384
G1 X184.041 Y154.091 E.27419
G1 X184.041 Y153.683 E.01384
G1 X175.959 Y153.683 E.27419
G1 X175.959 Y153.275 E.01384
G1 X184.041 Y153.275 E.27419
G1 X184.041 Y152.867 E.01384
G1 X175.959 Y152.867 E.27419
G1 X175.959 Y152.459 E.01384
G1 X184.224 Y152.459 E.2804
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
;LAYER_CHANGE
;Z:6.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
G92 E0.0
;6.8
G1 E-.8 F2100
M486 S-1
;AFTER_LAYER_CHANGE
;6.8
;_SET_FAN_SPEED_CHANGING_LAYER
; printing object angle-test-v1.3-B.stl id:0 copy 0
;PATH_TASK id=2332 conformal=1 surface=0 source_layer=9 shell_offset=0.000000
M486 S0
G1 Z7.2 F24000
G1 X184.775 Y208.275
G1 Z2.008
G1 E.8 F1800
M204 P2500
;TYPE:Outer wall
;WIDTH:0.449999
G1 F10200
G1 X175.225 Y208.275 E.32326
G1 X175.225 Y202 Z2.227 E.21253
G1 X175.225 Y199 E.10155
G1 X175.225 Y192.5 Z2.682 E.22056
G1 X175.225 Y189.5 E.10155
G1 X175.225 Y183 Z3.365 E.22123
G1 X175.225 Y180 E.10155
G1 X175.225 Y173.5 Z4.278 E.22218
G1 X175.225 Y170.5 E.10155
G1 X175.225 Y164 Z5.424 E.22341
G1 X175.225 Y161 E.10155
G1 X175.225 Y154.5 Z6.794 E.22485
G1 X175.225 Y151.725 E.09393
G1 X184.775 Y151.725 E.32326
G1 X184.775 Y154.5 E.09393
G1 X184.775 Y161 Z5.424 E.22485
G1 X184.775 Y164 E.10155
G1 X184.775 Y170.5 Z4.278 E.22341
G1 X184.775 Y173.5 E.10155
G1 X184.775 Y180 Z3.365 E.22218
G1 X184.775 Y183 E.10155
G1 X184.775 Y189.5 Z2.682 E.22123
G1 X184.775 Y192.5 E.10155
G1 X184.775 Y199 Z2.227 E.22056
G1 X184.775 Y202 E.10155
G1 X184.775 Y208.235 Z2.009 E.21118
;PATH_TASK id=2333 conformal=1 surface=0 source_layer=9 shell_offset=0.000000
G1 E-.8 F2100
G1 Z7.194 F24000
G1 X184.478 Y151.846
G1 Z6.794
G1 E.8 F1800
M204 P1500
;TYPE:Top surface
;WIDTH:0.432356
G1 F6000
G1 X184.478 Y154.5 E.08594
G1 X184.478 Y161 Z5.424 E.21511
G1 X184.478 Y164 E.09715
G1 X184.478 Y170.5 Z4.278 E.21373
G1 X184.478 Y173.5 E.09715
G1 X184.478 Y180 Z3.365 E.21255
G1 X184.478 Y183 E.09715
G1 X184.478 Y189.5 Z2.682 E.21164
G1 X184.478 Y192.5 E.09715
G1 X184.478 Y199 Z2.227 E.211
M73 P98 R0
G1 X184.478 Y202 E.09715
G1 X184.478 Y207.985 Z2.018 E.19392
;PATH_TASK id=2333 conformal=1 surface=0 source_layer=9 shell_offset=0.000000
G1 X184.478 Y207.985 F24000
G1 F6000
G1 X184.089 Y207.985 E.0126
G1 X184.089 Y202 Z2.227 E.19392
G1 X184.089 Y199 E.09715
G1 X184.089 Y192.5 Z2.682 E.211
G1 X184.089 Y189.5 E.09715
G1 X184.089 Y183 Z3.365 E.21164
G1 X184.089 Y180 E.09715
G1 X184.089 Y173.5 Z4.278 E.21255
G1 X184.089 Y170.5 E.09715
G1 X184.089 Y164 Z5.424 E.21373
G1 X184.089 Y161 E.09715
G1 X184.089 Y154.5 Z6.794 E.21511
G1 X184.089 Y152.015 E.08047
;PATH_TASK id=2333 conformal=1 surface=0 source_layer=9 shell_offset=0.000000
G1 X184.089 Y152.015 F24000
G1 F6000
G1 X183.7 Y152.015 E.0126
G1 X183.7 Y154.5 E.08047
G1 X183.7 Y161 Z5.424 E.21511
G1 X183.7 Y164 E.09715
G1 X183.7 Y170.5 Z4.278 E.21373
G1 X183.7 Y173.5 E.09715
G1 X183.7 Y180 Z3.365 E.21255
G1 X183.7 Y183 E.09715
G1 X183.7 Y189.5 Z2.682 E.21164
G1 X183.7 Y192.5 E.09715
G1 X183.7 Y199 Z2.227 E.211
G1 X183.7 Y202 E.09715
G1 X183.7 Y207.985 Z2.018 E.19392
G1 X183.31 Y207.985 E.01263
G1 X183.31 Y202 Z2.227 E.19392
G1 X183.31 Y199 E.09715
G1 X183.31 Y192.5 Z2.682 E.211
G1 X183.31 Y189.5 E.09715
G1 X183.31 Y183 Z3.365 E.21164
G1 X183.31 Y180 E.09715
G1 X183.31 Y173.5 Z4.278 E.21255
G1 X183.31 Y170.5 E.09715
G1 X183.31 Y164 Z5.424 E.21373
G1 X183.31 Y161 E.09715
G1 X183.31 Y154.5 Z6.794 E.21511
G1 X183.31 Y152.015 E.08047
G1 X182.921 Y152.015 E.0126
G1 X182.921 Y154.5 E.08047
G1 X182.921 Y161 Z5.424 E.21511
G1 X182.921 Y164 E.09715
G1 X182.921 Y170.5 Z4.278 E.21373
G1 X182.921 Y173.5 E.09715
G1 X182.921 Y180 Z3.365 E.21255
G1 X182.921 Y183 E.09715
G1 X182.921 Y189.5 Z2.682 E.21164
G1 X182.921 Y192.5 E.09715
G1 X182.921 Y199 Z2.227 E.211
G1 X182.921 Y202 E.09715
G1 X182.921 Y207.985 Z2.018 E.19392
G1 X182.531 Y207.985 E.01263
G1 X182.531 Y202 Z2.227 E.19392
G1 X182.531 Y199 E.09715
G1 X182.531 Y192.5 Z2.682 E.211
G1 X182.531 Y189.5 E.09715
G1 X182.531 Y183 Z3.365 E.21164
G1 X182.531 Y180 E.09715
G1 X182.531 Y173.5 Z4.278 E.21255
G1 X182.531 Y170.5 E.09715
G1 X182.531 Y164 Z5.424 E.21373
G1 X182.531 Y161 E.09715
G1 X182.531 Y154.5 Z6.794 E.21511
G1 X182.531 Y152.015 E.08047
G1 X182.142 Y152.015 E.0126
G1 X182.142 Y154.5 E.08047
G1 X182.142 Y161 Z5.424 E.21511
G1 X182.142 Y164 E.09715
G1 X182.142 Y170.5 Z4.278 E.21373
G1 X182.142 Y173.5 E.09715
G1 X182.142 Y180 Z3.365 E.21255
G1 X182.142 Y183 E.09715
G1 X182.142 Y189.5 Z2.682 E.21164
G1 X182.142 Y192.5 E.09715
G1 X182.142 Y199 Z2.227 E.211
G1 X182.142 Y202 E.09715
G1 X182.142 Y207.985 Z2.018 E.19392
;PATH_TASK id=2333 conformal=1 surface=0 source_layer=9 shell_offset=0.000000
G1 X182.142 Y207.985 F24000
G1 F6000
G1 X181.752 Y207.985 E.01263
G1 X181.752 Y202 Z2.227 E.19392
G1 X181.752 Y199 E.09715
G1 X181.752 Y192.5 Z2.682 E.211
G1 X181.752 Y189.5 E.09715
G1 X181.752 Y183 Z3.365 E.21164
G1 X181.752 Y180 E.09715
G1 X181.752 Y173.5 Z4.278 E.21255
G1 X181.752 Y170.5 E.09715
G1 X181.752 Y164 Z5.424 E.21373
G1 X181.752 Y161 E.09715
G1 X181.752 Y154.5 Z6.794 E.21511
G1 X181.752 Y152.015 E.08047
G1 X181.363 Y152.015 E.0126
G1 X181.363 Y154.5 E.08047
G1 X181.363 Y161 Z5.424 E.21511
G1 X181.363 Y164 E.09715
G1 X181.363 Y170.5 Z4.278 E.21373
G1 X181.363 Y173.5 E.09715
G1 X181.363 Y180 Z3.365 E.21255
G1 X181.363 Y183 E.09715
G1 X181.363 Y189.5 Z2.682 E.21164
G1 X181.363 Y192.5 E.09715
G1 X181.363 Y199 Z2.227 E.211
G1 X181.363 Y202 E.09715
G1 X181.363 Y207.985 Z2.018 E.19392
G1 X180.974 Y207.985 E.0126
G1 X180.974 Y202 Z2.227 E.19392
G1 X180.974 Y199 E.09715
G1 X180.974 Y192.5 Z2.682 E.211
G1 X180.974 Y189.5 E.09715
G1 X180.974 Y183 Z3.365 E.21164
G1 X180.974 Y180 E.09715
G1 X180.974 Y173.5 Z4.278 E.21255
G1 X180.974 Y170.5 E.09715
G1 X180.974 Y164 Z5.424 E.21373
G1 X180.974 Y161 E.09715
G1 X180.974 Y154.5 Z6.794 E.21511
G1 X180.974 Y152.015 E.08047
G1 X180.584 Y152.015 E.01263
;PATH_TASK id=2333 conformal=1 surface=0 source_layer=9 shell_offset=0.000000
G1 X180.584 Y152.015 F24000
G1 F6000
G1 X180.584 Y154.5 E.08047
G1 X180.584 Y161 Z5.424 E.21511
G1 X180.584 Y164 E.09715
G1 X180.584 Y170.5 Z4.278 E.21373
G1 X180.584 Y173.5 E.09715
G1 X180.584 Y180 Z3.365 E.21255
G1 X180.584 Y183 E.09715
G1 X180.584 Y189.5 Z2.682 E.21164
G1 X180.584 Y192.5 E.09715
G1 X180.584 Y199 Z2.227 E.211
G1 X180.584 Y202 E.09715
G1 X180.584 Y207.985 Z2.018 E.19392
G1 X180.195 Y207.985 E.0126
G1 X180.195 Y202 Z2.227 E.19392
G1 X180.195 Y199 E.09715
G1 X180.195 Y192.5 Z2.682 E.211
G1 X180.195 Y189.5 E.09715
G1 X180.195 Y183 Z3.365 E.21164
G1 X180.195 Y180 E.09715
G1 X180.195 Y173.5 Z4.278 E.21255
G1 X180.195 Y170.5 E.09715
G1 X180.195 Y164 Z5.424 E.21373
G1 X180.195 Y161 E.09715
G1 X180.195 Y154.5 Z6.794 E.21511
G1 X180.195 Y152.015 E.08047
G1 X179.805 Y152.015 E.01263
G1 X179.805 Y154.5 E.08047
G1 X179.805 Y161 Z5.424 E.21511
G1 X179.805 Y164 E.09715
G1 X179.805 Y170.5 Z4.278 E.21373
G1 X179.805 Y173.5 E.09715
G1 X179.805 Y180 Z3.365 E.21255
G1 X179.805 Y183 E.09715
G1 X179.805 Y189.5 Z2.682 E.21164
G1 X179.805 Y192.5 E.09715
G1 X179.805 Y199 Z2.227 E.211
G1 X179.805 Y202 E.09715
G1 X179.805 Y207.985 Z2.018 E.19392
G1 X179.416 Y207.985 E.0126
G1 X179.416 Y202 Z2.227 E.19392
G1 X179.416 Y199 E.09715
G1 X179.416 Y192.5 Z2.682 E.211
G1 X179.416 Y189.5 E.09715
G1 X179.416 Y183 Z3.365 E.21164
G1 X179.416 Y180 E.09715
G1 X179.416 Y173.5 Z4.278 E.21255
G1 X179.416 Y170.5 E.09715
G1 X179.416 Y164 Z5.424 E.21373
G1 X179.416 Y161 E.09715
G1 X179.416 Y154.5 Z6.794 E.21511
G1 X179.416 Y152.015 E.08047
G1 X179.026 Y152.015 E.01263
G1 X179.026 Y154.5 E.08047
G1 X179.026 Y161 Z5.424 E.21511
G1 X179.026 Y164 E.09715
G1 X179.026 Y170.5 Z4.278 E.21373
G1 X179.026 Y173.5 E.09715
G1 X179.026 Y180 Z3.365 E.21255
G1 X179.026 Y183 E.09715
G1 X179.026 Y189.5 Z2.682 E.21164
G1 X179.026 Y192.5 E.09715
G1 X179.026 Y199 Z2.227 E.211
G1 X179.026 Y202 E.09715
G1 X179.026 Y207.985 Z2.018 E.19392
G1 X178.637 Y207.985 E.0126
G1 X178.637 Y202 Z2.227 E.19392
G1 X178.637 Y199 E.09715
G1 X178.637 Y192.5 Z2.682 E.211
G1 X178.637 Y189.5 E.09715
G1 X178.637 Y183 Z3.365 E.21164
G1 X178.637 Y180 E.09715
G1 X178.637 Y173.5 Z4.278 E.21255
G1 X178.637 Y170.5 E.09715
G1 X178.637 Y164 Z5.424 E.21373
G1 X178.637 Y161 E.09715
G1 X178.637 Y154.5 Z6.794 E.21511
G1 X178.637 Y152.015 E.08047
G1 X178.248 Y152.015 E.0126
G1 X178.248 Y154.5 E.08047
G1 X178.248 Y161 Z5.424 E.21511
G1 X178.248 Y164 E.09715
G1 X178.248 Y170.5 Z4.278 E.21373
G1 X178.248 Y173.5 E.09715
G1 X178.248 Y180 Z3.365 E.21255
G1 X178.248 Y183 E.09715
G1 X178.248 Y189.5 Z2.682 E.21164
G1 X178.248 Y192.5 E.09715
G1 X178.247 Y199 Z2.227 E.211
G1 X178.247 Y202 E.09715
G1 X178.247 Y207.985 Z2.018 E.19392
;PATH_TASK id=2333 conformal=1 surface=0 source_layer=9 shell_offset=0.000000
G1 X178.247 Y207.985 F24000
G1 F6000
G1 X177.858 Y207.985 E.0126
G1 X177.858 Y202 Z2.227 E.19392
G1 X177.858 Y199 E.09715
G1 X177.858 Y192.5 Z2.682 E.211
G1 X177.858 Y189.5 E.09715
G1 X177.858 Y183 Z3.365 E.21164
G1 X177.858 Y180 E.09715
G1 X177.858 Y173.5 Z4.278 E.21255
G1 X177.858 Y170.5 E.09715
G1 X177.858 Y164 Z5.424 E.21373
G1 X177.858 Y161 E.09715
G1 X177.858 Y154.5 Z6.794 E.21511
G1 X177.858 Y152.015 E.08047
G1 X177.469 Y152.015 E.0126
G1 X177.469 Y154.5 E.08047
G1 X177.469 Y161 Z5.424 E.21511
G1 X177.469 Y164 E.09715
G1 X177.469 Y170.5 Z4.278 E.21373
G1 X177.469 Y173.5 E.09715
G1 X177.469 Y180 Z3.365 E.21255
G1 X177.469 Y183 E.09715
G1 X177.469 Y189.5 Z2.682 E.21164
G1 X177.469 Y192.5 E.09715
G1 X177.469 Y199 Z2.227 E.211
G1 X177.469 Y202 E.09715
G1 X177.469 Y207.985 Z2.018 E.19392
G1 X177.079 Y207.985 E.01263
G1 X177.079 Y202 Z2.227 E.19392
G1 X177.079 Y199 E.09715
G1 X177.079 Y192.5 Z2.682 E.211
G1 X177.079 Y189.5 E.09715
G1 X177.079 Y183 Z3.365 E.21164
G1 X177.079 Y180 E.09715
G1 X177.079 Y173.5 Z4.278 E.21255
G1 X177.079 Y170.5 E.09715
G1 X177.079 Y164 Z5.424 E.21373
G1 X177.079 Y161 E.09715
G1 X177.079 Y154.5 Z6.794 E.21511
G1 X177.079 Y152.015 E.08047
G1 X176.69 Y152.015 E.0126
G1 X176.69 Y154.5 E.08047
G1 X176.69 Y161 Z5.424 E.21511
G1 X176.69 Y164 E.09715
G1 X176.69 Y170.5 Z4.278 E.21373
G1 X176.69 Y173.5 E.09715
G1 X176.69 Y180 Z3.365 E.21255
G1 X176.69 Y183 E.09715
G1 X176.69 Y189.5 Z2.682 E.21164
G1 X176.69 Y192.5 E.09715
G1 X176.69 Y199 Z2.227 E.211
G1 X176.69 Y202 E.09715
G1 X176.69 Y207.985 Z2.018 E.19392
G1 X176.3 Y207.985 E.01263
G1 X176.3 Y202 Z2.227 E.19392
G1 X176.3 Y199 E.09715
G1 X176.3 Y192.5 Z2.682 E.211
G1 X176.3 Y189.5 E.09715
G1 X176.3 Y183 Z3.365 E.21164
G1 X176.3 Y180 E.09715
G1 X176.3 Y173.5 Z4.278 E.21255
G1 X176.3 Y170.5 E.09715
G1 X176.3 Y164 Z5.424 E.21373
G1 X176.3 Y161 E.09715
G1 X176.3 Y154.5 Z6.794 E.21511
G1 X176.3 Y152.015 E.08047
;PATH_TASK id=2333 conformal=1 surface=0 source_layer=9 shell_offset=0.000000
G1 X176.3 Y152.015 F24000
G1 F6000
G1 X175.911 Y152.015 E.0126
;PATH_TASK id=2333 conformal=1 surface=0 source_layer=9 shell_offset=0.000000
G1 X175.911 Y152.015 F24000
G1 F6000
G1 X175.911 Y154.5 E.08047
G1 X175.911 Y161 Z5.424 E.21511
G1 X175.911 Y164 E.09715
G1 X175.911 Y170.5 Z4.278 E.21373
G1 X175.911 Y173.5 E.09715
M73 P99 R0
G1 X175.911 Y180 Z3.365 E.21255
G1 X175.911 Y183 E.09715
G1 X175.911 Y189.5 Z2.682 E.21164
G1 X175.911 Y192.5 E.09715
G1 X175.911 Y199 Z2.227 E.211
G1 X175.911 Y202 E.09715
G1 X175.911 Y207.985 Z2.018 E.19392
;PATH_TASK id=2333 conformal=1 surface=0 source_layer=9 shell_offset=0.000000
G1 X175.911 Y207.985 F24000
G1 F6000
G1 X175.521 Y207.985 E.01263
G1 X175.521 Y202 Z2.227 E.19392
G1 X175.521 Y199 E.09715
G1 X175.521 Y192.5 Z2.682 E.211
G1 X175.521 Y189.5 E.09715
G1 X175.521 Y183 Z3.365 E.21164
G1 X175.521 Y180 E.09715
G1 X175.521 Y173.5 Z4.278 E.21255
G1 X175.521 Y170.5 E.09715
G1 X175.521 Y164 Z5.424 E.21373
G1 X175.521 Y161 E.09715
G1 X175.521 Y154.5 Z6.794 E.21511
G1 X175.521 Y151.846 E.08594
; stop printing object angle-test-v1.3-B.stl id:0 copy 0
G1 E-.8 F2100
M486 S-1
M106 S0
;TYPE:Custom
; filament end gcode 
G1 Z8.8 F720 ; Move bed down
M104 S0 ; turn off temperature
M140 S0 ; turn off heatbed
M107 ; turn off fan
G1 X6 Y350 F6000 ; park
G1 Z106.8 F300 ; Move bed down
M900 K0 ; reset LA
M142 S36 ; reset heatbreak target temp
M221 S100 ; reset flow percentage
M84 ; disable motors
; max_layer_z = 6.8
M73 P100 R0
; EXECUTABLE_BLOCK_END

; filament used [mm] = 704.49
; filament used [cm3] = 1.69
; filament used [g] = 2.10
; filament cost = 0.04
; total filament used [g] = 2.10
; total filament cost = 0.04
; total layers count = 34
; estimated printing time (normal mode) = 40m 30s
; estimated first layer printing time (normal mode) = 30m 31s

; CONFIG_BLOCK_START
; accel_to_decel_enable = 1
; accel_to_decel_factor = 50%
; activate_air_filtration = 0
; activate_air_filtration_during_print = 1
; activate_air_filtration_on_completion = 1
; activate_chamber_temp_control = 0
; adaptive_bed_mesh_margin = 0
; adaptive_pressure_advance = 0
; adaptive_pressure_advance_bridges = 0
; adaptive_pressure_advance_model = "0,0,0\n0,0,0"
; adaptive_pressure_advance_overhangs = 0
; additional_cooling_fan_speed = 70
; additional_fan_full_speed_layer = 0
; align_infill_direction_to_model = 0
; alternate_extra_wall = 0
; auxiliary_fan = 0
; bbl_calib_mark_logo = 1
; bed_custom_model = 
; bed_custom_texture = 
; bed_exclude_area = 0x0
; bed_mesh_max = 99999,99999
; bed_mesh_min = -99999,-99999
; bed_mesh_probe_distance = 50,50
; bed_temperature_formula = by_highest_temp
; before_layer_change_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]
; best_object_pos = 0.5,0.5
; bottom_shell_layers = 4
; bottom_shell_thickness = 0.5
; bottom_solid_infill_flow_ratio = 1
; bottom_surface_density = 100%
; bottom_surface_filament_id = 0
; bottom_surface_pattern = monotonic
; bridge_acceleration = 1500
; bridge_angle = 0
; bridge_density = 100%
; bridge_flow = 1
; bridge_line_width = 100%
; bridge_no_support = 0
; bridge_speed = 50
; brim_ears_detection_length = 1
; brim_ears_max_angle = 125
; brim_flow_ratio = 1
; brim_object_gap = 0.1
; brim_type = no_brim
; brim_use_efc_outline = 0
; brim_width = 0
; calib_flowrate_topinfill_special_order = 0
; chamber_minimal_temperature = 0
; chamber_temperature = 0
; change_extrusion_role_gcode = 
; change_filament_gcode = M600\nG1 E0.3 F1500 ; prime after color change
; close_additional_fan_first_x_layers = 1
; close_fan_the_first_x_layers = 1
; combine_brims = 0
; complete_print_exhaust_fan_speed = 80
; cool_plate_temp = 35
; cool_plate_temp_initial_layer = 35
; cooling_tube_length = 5
; cooling_tube_retraction = 91.5
; counterbore_hole_bridging = none
; curr_bed_type = Cool Plate
; default_acceleration = 2500
; default_filament_colour = ""
; default_filament_profile = "Prusa Generic PLA @XL"
; default_jerk = 0
; default_junction_deviation = 0
; default_print_profile = 0.20mm Speed @Prusa XL 0.4
; deretraction_speed = 30
; detect_narrow_internal_solid_infill = 1
; detect_overhang_wall = 1
; detect_thin_wall = 0
; different_settings_to_system = ;;
; disable_m73 = 0
; dont_filter_internal_bridges = disabled
; dont_slow_down_outer_wall = 0
; draft_shield = disabled
; during_print_exhaust_fan_speed = 60
; elefant_foot_compensation = 0.2
; elefant_foot_compensation_layers = 1
; elefant_foot_layers_density = 100%
; emit_machine_limits_to_gcode = 1
; enable_arc_fitting = 1
; enable_extra_bridge_layer = disabled
; enable_filament_ramming = 1
; enable_long_retraction_when_cut = 0
; enable_overhang_bridge_fan = 1
; enable_overhang_speed = 1
; enable_power_loss_recovery = printer_configuration
; enable_pressure_advance = 0
; enable_prime_tower = 0
; enable_support = 0
; enable_tower_interface_cooldown_during_tower = 0
; enable_tower_interface_features = 0
; enable_wrapping_detection = 0
; enforce_support_layers = 0
; eng_plate_temp = 0
; eng_plate_temp_initial_layer = 0
; ensure_vertical_shell_thickness = ensure_all
; exclude_object = 1
; extra_loading_move = -2
; extra_perimeters_on_overhangs = 0
; extra_solid_infills = 
; extruder_ams_count = 
; extruder_clearance_height_to_lid = 21
; extruder_clearance_height_to_rod = 21
; extruder_clearance_radius = 67
; extruder_colour = #F2754E
; extruder_offset = 0x0
; extruder_printable_area = 
; extruder_printable_height = 0
; extruder_type = Direct Drive
; extrusion_rate_smoothing_external_perimeter_only = 0
; fan_cooling_layer_time = 100
; fan_kickstart = 0
; fan_max_speed = 100
; fan_min_speed = 100
; fan_speedup_overhangs = 1
; fan_speedup_time = 0
; filament_adaptive_volumetric_speed = 0
; filament_adhesiveness_category = 0
; filament_change_extrusion_role_gcode = ""
; filament_change_length = 10
; filament_colour = #F2754E
; filament_cooling_before_tower = 10
; filament_cooling_final_speed = 3.5
; filament_cooling_initial_speed = 10
; filament_cooling_moves = 2
; filament_cost = 20
; filament_density = 1.24
; filament_diameter = 1.75
; filament_end_gcode = "; filament end gcode \n"
; filament_extruder_variant = "Direct Drive Standard"
; filament_flow_ratio = 1
; filament_flush_temp = 0
; filament_flush_volumetric_speed = 0
; filament_ids = GFL99
; filament_is_support = 0
; filament_loading_speed = 10
; filament_loading_speed_start = 50
; filament_map = 1
; filament_map_mode = Auto For Flush
; filament_max_volumetric_speed = 15
; filament_minimal_purge_on_wipe_tower = 15
; filament_multitool_ramming = 0
; filament_multitool_ramming_flow = 10
; filament_multitool_ramming_volume = 10
; filament_notes = ""
; filament_printable = 3
; filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
; filament_retract_lift_below = 0.6
; filament_self_index = 1
; filament_settings_id = "NP filament XL"
; filament_shrink = 100%
; filament_shrinkage_compensation_z = 100%
; filament_soluble = 0
; filament_stamping_distance = 0
; filament_stamping_loading_speed = 0
; filament_start_gcode = "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
; filament_toolchange_delay = 0
; filament_tower_interface_pre_extrusion_dist = 10
; filament_tower_interface_pre_extrusion_length = 0
; filament_tower_interface_print_temp = -1
; filament_tower_interface_purge_volume = 20
; filament_tower_ironing_area = 4
; filament_type = PLA
; filament_unloading_speed = 100
; filament_unloading_speed_start = 100
; filament_vendor = Generic
; file_start_gcode = 
; filename_format = {input_filename_base}_{layer_height}mm_{filament_type[initial_tool]}_{print_time}.gcode
; fill_multiline = 1
; filter_out_gap_fill = 0
; first_layer_flow_ratio = 1
; first_layer_print_sequence = 0
; first_x_layer_fan_speed = 0
; flush_into_infill = 0
; flush_into_objects = 0
; flush_into_support = 1
; flush_multiplier = 0.3
; flush_volumes_matrix = 0,280,280,280,280,0,280,280,280,280,0,280,280,280,280,0
; flush_volumes_vector = 140,140,140,140,140,140,140,140
; full_fan_speed_layer = 3
; fuzzy_skin = disabled_fuzzy
; fuzzy_skin_first_layer = 0
; fuzzy_skin_layers_between_ripple_offset = 1
; fuzzy_skin_mode = displacement
; fuzzy_skin_noise_type = classic
; fuzzy_skin_octaves = 4
; fuzzy_skin_persistence = 0.5
; fuzzy_skin_point_distance = 0.8
; fuzzy_skin_ripple_offset = 50%
; fuzzy_skin_ripples_per_layer = 15
; fuzzy_skin_scale = 1
; fuzzy_skin_thickness = 0.3
; gap_fill_flow_ratio = 1
; gap_fill_target = everywhere
; gap_infill_speed = 120
; gcode_add_line_number = 0
; gcode_comments = 0
; gcode_flavor = marlin2
; gcode_label_objects = 1
; grab_length = 0
; gyroid_optimized = 0
; has_scarf_joint_seam = 0
; head_wrap_detect_zone = 
; high_current_on_filament_swap = 0
; hole_to_polyhole = 0
; hole_to_polyhole_threshold = 0.01
; hole_to_polyhole_twisted = 1
; host_type = prusalink
; hot_plate_temp = 60
; hot_plate_temp_initial_layer = 60
; idle_temperature = 0
; independent_support_layer_height = 1
; infill_anchor = 2
; infill_anchor_max = 12
; infill_combination = 1
; infill_combination_max_layer_height = 100%
; infill_direction = 45
; infill_jerk = 9
; infill_lock_depth = 1
; infill_overhang_angle = 60
; infill_shift_step = 0.4
; infill_wall_overlap = 15%
; inherits_group = "0.20mm Speed @Prusa XL 0.4";"Prusa Generic PLA @XL";"Prusa XL 0.4 nozzle"
; initial_layer_acceleration = 500
; initial_layer_infill_speed = 25
; initial_layer_jerk = 9
; initial_layer_line_width = 0.5
; initial_layer_min_bead_width = 85%
; initial_layer_print_height = 0.2
; initial_layer_speed = 25
; initial_layer_travel_acceleration = 100%
; initial_layer_travel_jerk = 100%
; initial_layer_travel_speed = 100%
; inner_wall_acceleration = 3000
; inner_wall_filament_id = 0
; inner_wall_flow_ratio = 1
; inner_wall_jerk = 9
; inner_wall_line_width = 0.45
; inner_wall_speed = 170
; input_shaping_damp_x = 0.1
; input_shaping_damp_y = 0.1
; input_shaping_emit = 0
; input_shaping_freq_x = 0
; input_shaping_freq_y = 0
; input_shaping_type = Default
; interface_shells = 0
; interlocking_beam = 0
; interlocking_beam_layer_count = 2
; interlocking_beam_width = 0.8
; interlocking_boundary_avoidance = 2
; interlocking_depth = 2
; interlocking_orientation = 22.5
; internal_bridge_angle = 0
; internal_bridge_density = 100%
; internal_bridge_fan_speed = -1
; internal_bridge_flow = 1
; internal_bridge_speed = 150%
; internal_solid_filament_id = 0
; internal_solid_infill_acceleration = 4000
; internal_solid_infill_flow_ratio = 1
; internal_solid_infill_line_width = 0.45
; internal_solid_infill_pattern = monotonic
; internal_solid_infill_speed = 200
; ironing_angle = 0
; ironing_angle_fixed = 0
; ironing_fan_speed = -1
; ironing_flow = 15%
; ironing_inset = 0
; ironing_pattern = rectilinear
; ironing_spacing = 0.1
; ironing_speed = 15
; ironing_type = no ironing
; is_infill_first = 0
; lateral_lattice_angle_1 = -45
; lateral_lattice_angle_2 = 45
; layer_change_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
; layer_height = 0.2
; lightning_overhang_angle = 45
; lightning_prune_angle = 45
; lightning_straightening_angle = 45
; line_width = 0.45
; long_retractions_when_cut = 0
; long_retractions_when_ec = 0
; machine_end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720{endif} ; Move bed down\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X6 Y350 F6000 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+100, max_print_height)} F300{endif} ; Move bed down\nM900 K0 ; reset LA\nM142 S36 ; reset heatbreak target temp\nM221 S100 ; reset flow percentage\nM84 ; disable motors\n; max_layer_z = [max_layer_z]
; machine_load_filament_time = 0
; machine_max_acceleration_e = 2500,2500
; machine_max_acceleration_extruding = 4000,4000
; machine_max_acceleration_retracting = 1200,1200
; machine_max_acceleration_travel = 5000,5000
; machine_max_acceleration_x = 7000,7000
; machine_max_acceleration_y = 7000,7000
; machine_max_acceleration_z = 200,200
; machine_max_jerk_e = 10,10
; machine_max_jerk_x = 8,8
; machine_max_jerk_y = 8,8
; machine_max_jerk_z = 2,2
; machine_max_junction_deviation = 0.01
; machine_max_speed_e = 100,100
; machine_max_speed_x = 400,400
; machine_max_speed_y = 400,400
; machine_max_speed_z = 12,12
; machine_min_extruding_rate = 0,0
; machine_min_travel_rate = 0,0
; machine_pause_gcode = M601
; machine_start_gcode = M17 ; enable steppers\nM862.3 P \"XL\" ; printer model check\nM115 U6.0.1+14848\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; set print area\nM555 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])}\n; inform about nozzle diameter\nM862.1 P[nozzle_diameter]\n; set & wait for bed and extruder temp for MBL\nM140 S[first_layer_bed_temperature] ; set bed temp\nM104 T0 S{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : (filament_type[0]=~/.*PET.*/) ? 175 : 170)} ; set extruder temp for bed leveling\nM109 T0 R{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : (filament_type[0]=~/.*PET.*/) ? 175 : 170)} ; wait for temp\n; home carriage, pick tool, home all\nG28 XY\nM84 E ; turn off E motor\nG28 Z\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG29 G ; absorb heat\n; move to the nozzle cleanup area\nG1 X{(min(((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))), first_layer_print_min[0])) + 32} Y{(min((first_layer_print_min[1] - 7), first_layer_print_min[1]))} Z{5} F4800\nM302 S160 ; lower cold extrusion limit to 160C\nG1 E{-(filament_type[0] == \"FLEX\" ? 4 : 2)} F2400 ; retraction for nozzle cleanup\n; nozzle cleanup\nM84 E ; turn off E motor\nG29 P9 X{((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)))} Y{(first_layer_print_min[1] - 7)} W{32} H{7}\nG0 Z10 F480 ; move away in Z\n{if first_layer_bed_temperature[0] > 60}\nG0 Z70 F480 ; move away (a bit more) in Z\nG0 X30 Y{print_bed_min[1]} F6000 ; move away in X/Y for higher bed temperatures\n{endif}\nM106 S100 ; cool off the nozzle\nM107 ; stop cooling off the nozzle - turn off the fan\n; MBL\nM84 E ; turn off E motor\nG29 P1 ; invalidate mbl & probe print area\nG29 P1 X30 Y0 W50 H20 C ; probe near purge place\nG29 P3.2 ; interpolate mbl probes\nG29 P3.13 ; extrapolate mbl outside probe area\nG29 A ; activate mbl\nM104 S[first_layer_temperature] ; set extruder temp\nG1 Z10 F720 ; move away in Z\nG0 X30 Y-8 F6000 ; move next to the sheet\n; wait for extruder temp\nM109 T0 S{first_layer_temperature[0]}\n;\n; purge\n;\nG92 E0 ; reset extruder position\nG0 X{(0 == 0 ? 30 : (0 == 1 ? 150 : (0 == 2 ? 210 : 330)))} Y{(0 < 4 ? -8 : -5.5)} ; move close to the sheet's edge\nG1 E{(filament_type[0] == \"FLEX\" ? 4 : 2)} F2400 ; deretraction after the initial one before nozzle cleaning\nG0 E10 X40 Z0.2 F500 ; purge\nG0 X70 E9 F800 ; purge\nG0 X{70 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{70 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG92 E0 ; reset extruder position
; machine_tool_change_time = 0
; machine_unload_filament_time = 0
; make_overhang_printable = 0
; make_overhang_printable_angle = 55
; make_overhang_printable_hole_size = 0
; manual_filament_change = 0
; master_extruder_id = 1
; max_bridge_length = 10
; max_layer_height = 0.3
; max_resonance_avoidance_speed = 120
; max_travel_detour_distance = 0
; max_volumetric_extrusion_rate_slope = 0
; max_volumetric_extrusion_rate_slope_segment_length = 3
; min_bead_width = 85%
; min_feature_size = 25%
; min_layer_height = 0.07
; min_length_factor = 0.5
; min_resonance_avoidance_speed = 70
; min_skirt_length = 4
; min_width_top_surface = 300%
; minimum_sparse_infill_area = 15
; mmu_segmented_region_interlocking_depth = 0
; mmu_segmented_region_max_width = 0
; nonplanar_layers_angle = 12
; nonplanar_layers_height = 5
; nonplanar_top_surface_direction = 90
; nonplanar_top_surface_flow_ratio = 1
; notes = 
; nozzle_diameter = 0.4
; nozzle_flush_dataset = 0
; nozzle_height = 2.5
; nozzle_hrc = 0
; nozzle_temperature = 210
; nozzle_temperature_initial_layer = 220
; nozzle_temperature_range_high = 230
; nozzle_temperature_range_low = 190
; nozzle_type = hardened_steel
; nozzle_volume = 0
; nozzle_volume_type = Standard
; only_one_wall_first_layer = 0
; only_one_wall_top = 0
; ooze_prevention = 0
; other_layers_print_sequence = 0
; other_layers_print_sequence_nums = 0
; outer_wall_acceleration = 2500
; outer_wall_filament_id = 0
; outer_wall_flow_ratio = 1
; outer_wall_jerk = 9
; outer_wall_line_width = 0.45
; outer_wall_speed = 170
; overhang_1_4_speed = 90%
; overhang_2_4_speed = 30
; overhang_3_4_speed = 25
; overhang_4_4_speed = 15
; overhang_fan_speed = 100
; overhang_fan_threshold = 50%
; overhang_flow_ratio = 1
; overhang_reverse = 0
; overhang_reverse_internal_only = 0
; overhang_reverse_threshold = 50%
; parallel_printheads_bed_exclude_areas = 
; parallel_printheads_count = 1
; parking_pos_retraction = 92
; part_cooling_fan_min_pwm = 0
; physical_extruder_map = 0
; post_process = 
; precise_outer_wall = 1
; precise_z_height = 0
; preferred_orientation = 0
; preheat_steps = 1
; preheat_time = 30
; pressure_advance = 0.02
; prime_tower_brim_width = 3
; prime_tower_enable_framework = 0
; prime_tower_flat_ironing = 0
; prime_tower_infill_gap = 150%
; prime_tower_skip_points = 1
; prime_tower_width = 60
; prime_volume = 45
; print_compatible_printers = "Prusa XL 0.4 nozzle"
; print_extruder_id = 1
; print_extruder_variant = "Direct Drive Standard"
; print_flow_ratio = 1
; print_order = default
; print_sequence = by layer
; print_settings_id = NP process XL
; printable_area = 0x0,360x0,360x360,0x360
; printable_height = 360
; printer_extruder_id = 1
; printer_extruder_variant = "Direct Drive Standard"
; printer_model = Prusa XL
; printer_notes = Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_XLIS\nPG\nINPUT_SHAPER
; printer_settings_id = NP machine XL
; printer_structure = undefine
; printer_technology = FFF
; printer_variant = 0.4
; printing_by_object_gcode = 
; process_change_extrusion_role_gcode = 
; purge_in_prime_tower = 1
; raft_contact_distance = 0.15
; raft_expansion = 1.5
; raft_first_layer_density = 80%
; raft_first_layer_expansion = 3.5
; raft_layers = 0
; reduce_crossing_wall = 1
; reduce_fan_stop_start_freq = 1
; reduce_infill_retraction = 1
; relative_bridge_angle = 0
; required_nozzle_HRC = 0
; resolution = 0.008
; resonance_avoidance = 0
; retract_before_wipe = 80%
; retract_length_toolchange = 2
; retract_lift_above = 0
; retract_lift_below = 1.5
; retract_lift_enforce = All Surfaces
; retract_restart_extra = 0
; retract_restart_extra_toolchange = 0
; retract_when_changing_layer = 1
; retraction_distances_when_cut = 18
; retraction_distances_when_ec = 10
; retraction_length = 0.8
; retraction_minimum_travel = 1.5
; retraction_speed = 35
; role_based_wipe_speed = 1
; scan_first_layer = 0
; scarf_angle_threshold = 155
; scarf_joint_flow_ratio = 1
; scarf_joint_speed = 100%
; scarf_overhang_threshold = 40%
; seam_gap = 10%
; seam_position = aligned
; seam_slope_conditional = 0
; seam_slope_entire_loop = 0
; seam_slope_inner_walls = 0
; seam_slope_min_length = 20
; seam_slope_start_height = 0
; seam_slope_steps = 10
; seam_slope_type = none
; set_nonplanar_top_surface_direction = 1
; set_nonplanar_top_surface_flow_ratio = 0
; set_other_flow_ratios = 0
; silent_mode = 0
; single_extruder_multi_material = 1
; single_extruder_multi_material_priming = 0
; single_loop_draft_shield = 0
; skeleton_infill_density = 25%
; skeleton_infill_line_width = 100%
; skin_infill_density = 25%
; skin_infill_depth = 2
; skin_infill_line_width = 100%
; skirt_distance = 2
; skirt_height = 3
; skirt_loops = 0
; skirt_speed = 50
; skirt_start_angle = -135
; skirt_type = combined
; slice_closing_radius = 0.049
; slicing_mode = regular
; slow_down_for_layer_cooling = 1
; slow_down_layer_time = 10
; slow_down_layers = 0
; slow_down_min_speed = 15
; slowdown_for_curled_perimeters = 1
; small_area_infill_flow_compensation = 0
; small_area_infill_flow_compensation_model = 0,0;"\n0.2,0.4444";"\n0.4,0.6145";"\n0.6,0.7059";"\n0.8,0.7619";"\n1.5,0.8571";"\n2,0.8889";"\n3,0.9231";"\n5,0.9520";"\n10,1"
; small_perimeter_speed = 170
; small_perimeter_threshold = 0
; solid_infill_direction = 45
; solid_infill_rotate_template = 
; sparse_infill_acceleration = 4000
; sparse_infill_density = 15%
; sparse_infill_filament_id = 0
; sparse_infill_flow_ratio = 1
; sparse_infill_line_width = 0.45
; sparse_infill_pattern = crosshatch
; sparse_infill_rotate_template = 
; sparse_infill_speed = 200
; spiral_finishing_flow_ratio = 0
; spiral_mode = 0
; spiral_mode_max_xy_smoothing = 200%
; spiral_mode_smooth = 0
; spiral_starting_flow_ratio = 0
; staggered_inner_seams = 0
; standby_temperature_delta = -5
; start_end_points = 30x-3,54x245
; supertack_plate_temp = 35
; supertack_plate_temp_initial_layer = 35
; support_air_filtration = 1
; support_angle = 0
; support_base_pattern = default
; support_base_pattern_spacing = 2
; support_bottom_interface_spacing = 0.5
; support_bottom_z_distance = 0.2
; support_chamber_temp_control = 1
; support_critical_regions_only = 0
; support_expansion = 0
; support_filament = 0
; support_flow_ratio = 1
; support_interface_bottom_layers = 0
; support_interface_filament = 0
; support_interface_flow_ratio = 1
; support_interface_loop_pattern = 0
; support_interface_not_for_body = 1
; support_interface_pattern = auto
; support_interface_spacing = 0.2
; support_interface_speed = 80
; support_interface_top_layers = 5
; support_ironing = 0
; support_ironing_flow = 10%
; support_ironing_pattern = rectilinear
; support_ironing_spacing = 0.1
; support_line_width = 0.36
; support_material_interface_fan_speed = -1
; support_multi_bed_types = 0
; support_object_first_layer_gap = 0.2
; support_object_skip_flush = 0
; support_object_xy_distance = 0.35
; support_on_build_plate_only = 0
; support_parallel_printheads = 0
; support_remove_small_overhang = 1
; support_speed = 110
; support_style = organic
; support_threshold_angle = 40
; support_threshold_overlap = 50%
; support_top_z_distance = 0.2
; support_type = tree(auto)
; symmetric_infill_y_axis = 0
; temperature_vitrification = 60
; template_custom_gcode = 
; textured_cool_plate_temp = 40
; textured_cool_plate_temp_initial_layer = 40
; textured_plate_temp = 45
; textured_plate_temp_initial_layer = 45
; thick_bridges = 0
; thick_internal_bridges = 1
; thumbnails = 16x16/QOI, 313x173/QOI, 440x240/QOI, 480x240/QOI, 640x480/PNG
; time_cost = 0
; time_lapse_gcode = 
; timelapse_enabled = 0
; timelapse_type = 0
; tool_change_on_wipe_tower = 0
; top_bottom_infill_wall_overlap = 25%
; top_shell_layers = 3
; top_shell_thickness = 0.7
; top_solid_infill_flow_ratio = 1
; top_surface_acceleration = 1500
; top_surface_density = 100%
; top_surface_filament_id = 0
; top_surface_jerk = 9
; top_surface_line_width = 0.42
; top_surface_pattern = monotonicline
; top_surface_speed = 100
; travel_acceleration = 5000
; travel_jerk = 12
; travel_slope = 3
; travel_speed = 400
; travel_speed_z = 0
; tree_support_angle_slow = 30
; tree_support_auto_brim = 1
; tree_support_branch_angle = 30
; tree_support_branch_angle_organic = 40
; tree_support_branch_diameter = 5
; tree_support_branch_diameter_angle = 5
; tree_support_branch_diameter_organic = 2
; tree_support_branch_distance = 5
; tree_support_branch_distance_organic = 1
; tree_support_brim_width = 3
; tree_support_tip_diameter = 0.8
; tree_support_top_rate = 30%
; tree_support_wall_count = 0
; use_3mf = 0
; use_firmware_retraction = 0
; use_nonplanar_layers = 1
; use_relative_e_distances = 1
; volumetric_speed_coefficients = ""
; wall_direction = ccw
; wall_distribution_count = 1
; wall_generator = arachne
; wall_loops = 2
; wall_maximum_deviation = 0.025
; wall_maximum_resolution = 0.5
; wall_sequence = inner wall/outer wall
; wall_transition_angle = 10
; wall_transition_filter_deviation = 25%
; wall_transition_length = 100%
; wipe = 1
; wipe_before_external_loop = 0
; wipe_distance = 1
; wipe_on_loops = 0
; wipe_speed = 80%
; wipe_tower_bridging = 10
; wipe_tower_cone_angle = 30
; wipe_tower_extra_flow = 100%
; wipe_tower_extra_rib_length = 0
; wipe_tower_extra_spacing = 100%
; wipe_tower_filament = 0
; wipe_tower_fillet_wall = 1
; wipe_tower_max_purge_speed = 90
; wipe_tower_no_sparse_layers = 0
; wipe_tower_rib_width = 8
; wipe_tower_rotation_angle = 0
; wipe_tower_type = type2
; wipe_tower_wall_type = rib
; wipe_tower_x = 15.000
; wipe_tower_x = 15
; wipe_tower_y = 220.000
; wipe_tower_y = 220
; wiping_volumes_extruders = 70,70,70,70,70,70,70,70,70,70
; wrapping_detection_gcode = 
; wrapping_detection_layers = 20
; wrapping_exclude_area = 
; xy_contour_compensation = 0
; xy_hole_compensation = 0
; z_hop = 0.4
; z_hop_types = Auto Lift
; z_offset = 0
; zaa_dont_alternate_fill_direction = 0
; zaa_enabled = 0
; zaa_min_z = 0.05
; zaa_minimize_perimeter_height = 35
; first_layer_bed_temperature = 35
; bed_shape = 0x0,360x0,360x360,0x360
; first_layer_temperature = 220
; first_layer_height = 0.200
; CONFIG_BLOCK_END