Bat Wing Storage Box with Sculpted Lid | Halloween
Version 1.0.0

A bat-shaped box with raised wing veins, ears and facial details on a lift-off lid. Three compartments hold hair clips, earrings or small desk items.

Dimensions and storage layout can also be adjusted on the model page:
https://boxesmodel.com/models/halloween-bat-wing-case
Overall wingspan, compartment layout, centre width, divider height, wall/base thickness and lid fit can be adjusted. The matching lid scales with the body.
The files here are the complete fixed default-size version. Custom exports follow the pricing shown on the model page.

DEFAULT SIZE AND ASSEMBLY
210 x 111.35 x 45.15 mm overall. Default centre bay width setting: 50 mm; divider height: 23 mm; base: 3.2 mm. The tapered wings are not rectangular storage volumes. Nominal lid clearance: 0.30 mm per side.
Print one body and one lid. Remove support material from the locating rim and lower the lid vertically. No purchased hardware is needed. Inspect the wing tips and lid relief for supports; the lid is not a latch or seal.
Dimensions are in millimetres. Each STEP is an alternative CAD format for the matching STL, not an extra piece to print.

PRINT STATUS AND COLORS
Geometry, dimensions and part completeness were checked in CAD. This model has not been sliced or physically test-printed. Review orientation, supports and tolerances in your slicer. No tested print profile, print time or G-code is supplied.
The cover is a render of the actual model, not a photograph. STL and STEP contain uncolored geometry; illustrated colors require painting or slicer coloring. No AMS/MMU-ready multicolor 3MF is included. Food-contact performance has not been validated; use wrapped sweets if storing treats.

CREDITS AND LICENSE
Created for boxesmodel with AI-assisted parametric CAD development.
© 2026 boxesmodel. CC BY-NC-ND 4.0: https://creativecommons.org/licenses/by-nc-nd/4.0/
Personal noncommercial printing is permitted under the license. Credit boxesmodel with source and license links when sharing the original files. Do not distribute modified versions; the linked license contains the full terms.