PRINTING SETTINGS
Apple Siri Remote + Samsung TV Remote Dual Stand
Yutaka3DLab

Printing Technology: FDM / FFF
Recommended Material: PETG
Layer Height: 0.20 mm
Infill: 40%
Print Orientation: Flat bottom on build plate
Supports: Not required in recommended orientation

MODEL DIMENSIONS
85 x 55 x 50 mm

NOTES
- 40% infill is recommended for additional weight and stability.
- Use a clean, properly prepared build plate.
- Verify the model's fit with your remotes after printing.
- Other materials and settings may produce different results.
- If using the included 3MF, review the printer and filament profiles before printing.

Designed by Yutaka3DLab
https://yutaka3dlab.com/