Moon Spellbook Storage Box - Sculpted Lift-Off Lid | Halloween
Version 1.0.0

A book-shaped keepsake box with a curved spine, sculpted page edges and a decorated cover. The crescent moon, stars, bats and curling vines are raised geometry. The removable cover reveals three compartments for jewelry, hair clips, notes or wrapped sweets.

NEED CUSTOM DIMENSIONS?
If you need custom dimensions, visit boxesmodel to customize this model:
https://boxesmodel.com/models/halloween-moon-spellbook-box
On the website you can adjust overall book length, 1-4 compartments, divider height, the middle compartment proportion in the three-compartment layout, wall/base thickness and lid clearance. The cover and locating rim regenerate with the body.
The files included here are the complete fixed default-size version. The website is optional; custom exports follow the pricing shown there.

DEFAULT SIZE AND ASSEMBLY
Default assembled size: 146.95 x 190 x 52.13 mm (width x length x height). The inner opening is 123.4 x 176.4 mm before allowing for rounded corners and dividers. Divider height above the floor: 38.1 mm. Nominal lid clearance: 0.30 mm per side; locating rim depth: 4.5 mm.
Print one body.stl and one lid.stl. The cover lifts straight off; it is not hinged. Remove supports from the locating rim, then lower the cover vertically onto the body. No screws, magnets or other hardware are needed. Check fit before applying force. The body rests on its bottom; review the decorated lid and underside rim separately for orientation and supports.
All dimensions are in millimetres. Each STEP file is the CAD-format alternative to the matching STL, not an additional piece to print.

PRINT STATUS AND COLORS
The geometry, dimensions and part completeness were checked in CAD. This model has not been sliced or physically test-printed. Review orientation, supports and tolerances in your slicer; no tested print profile, print time or G-code is supplied.
The cover image is a render of the actual model, not a photograph of a physical print. STL and STEP files contain uncolored geometry. The illustrated surface colors require your own painting or slicer coloring; no AMS/MMU-ready multicolor 3MF is included.
For small objects or individually wrapped sweets; food-contact performance has not been validated.

CREDITS AND LICENSE
Created for boxesmodel with AI-assisted parametric CAD development.
© 2026 boxesmodel. CC BY-NC-ND 4.0: https://creativecommons.org/licenses/by-nc-nd/4.0/
Personal noncommercial printing is permitted under the license. Credit boxesmodel and include the source and license links when sharing the original files. Do not distribute modified versions; the linked license contains the full terms.