Miniature ornate picture frames — STL files

Included models (approximate dimensions):
- 01_ornate_portrait_50x65mm.stl — portrait rectangular frame, 50 x 65 mm outer size, 29 x 42 mm opening
- 02_ornate_landscape_65x48mm.stl — landscape rectangular frame, 65 x 48 mm outer size, 43 x 27 mm opening
- 03_ornate_oval_48x62mm.stl — oval frame, 48 x 62 mm outer size, 28 x 42 mm opening
- 04_small_oval_38x48mm.stl — small oval frame, 38 x 48 mm outer size, 22 x 32 mm opening
- 05_ornate_square_52x52mm.stl — square frame, 52 x 52 mm outer size, 30 x 30 mm opening

These are original decorative approximations inspired by the reference photo, not exact replicas. The gold finish in the photo is paint/material; print in PLA and paint gold for a similar look.

Print tips: lay the flat back on the build plate; 0.12–0.16 mm layers, 3 walls, 10–15% infill, supports usually not needed. Check the opening and frame dimensions in your slicer before printing. For a photo backing, add a separate thin card/paper backing or design a rear clip.